?????????? ????????? - ??????????????? - /home/agenciai/public_html/cd38d8/pod.tar
???????
perl5120delta.pod 0000644 00000256267 15125556335 0007570 0 ustar 00 =encoding utf8 =head1 NAME perl5120delta - what is new for perl v5.12.0 =head1 DESCRIPTION This document describes differences between the 5.10.0 release and the 5.12.0 release. Many of the bug fixes in 5.12.0 are already included in the 5.10.1 maintenance release. You can see the list of those changes in the 5.10.1 release notes (L<perl5101delta>). =head1 Core Enhancements =head2 New C<package NAME VERSION> syntax This new syntax allows a module author to set the $VERSION of a namespace when the namespace is declared with 'package'. It eliminates the need for C<our $VERSION = ...> and similar constructs. E.g. package Foo::Bar 1.23; # $Foo::Bar::VERSION == 1.23 There are several advantages to this: =over =item * C<$VERSION> is parsed in exactly the same way as C<use NAME VERSION> =item * C<$VERSION> is set at compile time =item * C<$VERSION> is a version object that provides proper overloading of comparison operators so comparing C<$VERSION> to decimal (1.23) or dotted-decimal (v1.2.3) version numbers works correctly. =item * Eliminates C<$VERSION = ...> and C<eval $VERSION> clutter =item * As it requires VERSION to be a numeric literal or v-string literal, it can be statically parsed by toolchain modules without C<eval> the way MM-E<gt>parse_version does for C<$VERSION = ...> =back It does not break old code with only C<package NAME>, but code that uses C<package NAME VERSION> will need to be restricted to perl 5.12.0 or newer This is analogous to the change to C<open> from two-args to three-args. Users requiring the latest Perl will benefit, and perhaps after several years, it will become a standard practice. However, C<package NAME VERSION> requires a new, 'strict' version number format. See L</"Version number formats"> for details. =head2 The C<...> operator A new operator, C<...>, nicknamed the Yada Yada operator, has been added. It is intended to mark placeholder code that is not yet implemented. See L<perlop/"Yada Yada Operator">. =head2 Implicit strictures Using the C<use VERSION> syntax with a version number greater or equal to 5.11.0 will lexically enable strictures just like C<use strict> would do (in addition to enabling features.) The following: use 5.12.0; means: use strict; use feature ':5.12'; =head2 Unicode improvements Perl 5.12 comes with Unicode 5.2, the latest version available to us at the time of release. This version of Unicode was released in October 2009. See L<http://www.unicode.org/versions/Unicode5.2.0> for further details about what's changed in this version of the standard. See L<perlunicode> for instructions on installing and using other versions of Unicode. Additionally, Perl's developers have significantly improved Perl's Unicode implementation. For full details, see L</Unicode overhaul> below. =head2 Y2038 compliance Perl's core time-related functions are now Y2038 compliant. (It may not mean much to you, but your kids will love it!) =head2 qr overloading It is now possible to overload the C<qr//> operator, that is, conversion to regexp, like it was already possible to overload conversion to boolean, string or number of objects. It is invoked when an object appears on the right hand side of the C<=~> operator or when it is interpolated into a regexp. See L<overload>. =head2 Pluggable keywords Extension modules can now cleanly hook into the Perl parser to define new kinds of keyword-headed expression and compound statement. The syntax following the keyword is defined entirely by the extension. This allows a completely non-Perl sublanguage to be parsed inline, with the correct ops cleanly generated. See L<perlapi/PL_keyword_plugin> for the mechanism. The Perl core source distribution also includes a new module L<XS::APItest::KeywordRPN>, which implements reverse Polish notation arithmetic via pluggable keywords. This module is mainly used for test purposes, and is not normally installed, but also serves as an example of how to use the new mechanism. Perl's developers consider this feature to be experimental. We may remove it or change it in a backwards-incompatible way in Perl 5.14. =head2 APIs for more internals The lowest layers of the lexer and parts of the pad system now have C APIs available to XS extensions. These are necessary to support proper use of pluggable keywords, but have other uses too. The new APIs are experimental, and only cover a small proportion of what would be necessary to take full advantage of the core's facilities in these areas. It is intended that the Perl 5.13 development cycle will see the addition of a full range of clean, supported interfaces. Perl's developers consider this feature to be experimental. We may remove it or change it in a backwards-incompatible way in Perl 5.14. =head2 Overridable function lookup Where an extension module hooks the creation of rv2cv ops to modify the subroutine lookup process, this now works correctly for bareword subroutine calls. This means that prototypes on subroutines referenced this way will be processed correctly. (Previously bareword subroutine names were initially looked up, for parsing purposes, by an unhookable mechanism, so extensions could only properly influence subroutine names that appeared with an C<&> sigil.) =head2 A proper interface for pluggable Method Resolution Orders As of Perl 5.12.0 there is a new interface for plugging and using method resolution orders other than the default linear depth first search. The C3 method resolution order added in 5.10.0 has been re-implemented as a plugin, without changing its Perl-space interface. See L<perlmroapi> for more information. =head2 C<\N> experimental regex escape Perl now supports C<\N>, a new regex escape which you can think of as the inverse of C<\n>. It will match any character that is not a newline, independently from the presence or absence of the single line match modifier C</s>. It is not usable within a character class. C<\N{3}> means to match 3 non-newlines; C<\N{5,}> means to match at least 5. C<\N{NAME}> still means the character or sequence named C<NAME>, but C<NAME> no longer can be things like C<3>, or C<5,>. This will break a L<custom charnames translator|charnames/CUSTOM TRANSLATORS> which allows numbers for character names, as C<\N{3}> will now mean to match 3 non-newline characters, and not the character whose name is C<3>. (No name defined by the Unicode standard is a number, so only custom translators might be affected.) Perl's developers are somewhat concerned about possible user confusion with the existing C<\N{...}> construct which matches characters by their Unicode name. Consequently, this feature is experimental. We may remove it or change it in a backwards-incompatible way in Perl 5.14. =head2 DTrace support Perl now has some support for DTrace. See "DTrace support" in F<INSTALL>. =head2 Support for C<configure_requires> in CPAN module metadata Both C<CPAN> and C<CPANPLUS> now support the C<configure_requires> keyword in the F<META.yml> metadata file included in most recent CPAN distributions. This allows distribution authors to specify configuration prerequisites that must be installed before running F<Makefile.PL> or F<Build.PL>. See the documentation for C<ExtUtils::MakeMaker> or C<Module::Build> for more on how to specify C<configure_requires> when creating a distribution for CPAN. =head2 C<each>, C<keys>, C<values> are now more flexible The C<each>, C<keys>, C<values> function can now operate on arrays. =head2 C<when> as a statement modifier C<when> is now allowed to be used as a statement modifier. =head2 C<$,> flexibility The variable C<$,> may now be tied. =head2 // in when clauses // now behaves like || in when clauses =head2 Enabling warnings from your shell environment You can now set C<-W> from the C<PERL5OPT> environment variable =head2 C<delete local> C<delete local> now allows you to locally delete a hash entry. =head2 New support for Abstract namespace sockets Abstract namespace sockets are Linux-specific socket type that live in AF_UNIX family, slightly abusing it to be able to use arbitrary character arrays as addresses: They start with nul byte and are not terminated by nul byte, but with the length passed to the socket() system call. =head2 32-bit limit on substr arguments removed The 32-bit limit on C<substr> arguments has now been removed. The full range of the system's signed and unsigned integers is now available for the C<pos> and C<len> arguments. =head1 Potentially Incompatible Changes =head2 Deprecations warn by default Over the years, Perl's developers have deprecated a number of language features for a variety of reasons. Perl now defaults to issuing a warning if a deprecated language feature is used. Many of the deprecations Perl now warns you about have been deprecated for many years. You can find a list of what was deprecated in a given release of Perl in the C<perl5xxdelta.pod> file for that release. To disable this feature in a given lexical scope, you should use C<no warnings 'deprecated';> For information about which language features are deprecated and explanations of various deprecation warnings, please see L<perldiag>. See L</Deprecations> below for the list of features and modules Perl's developers have deprecated as part of this release. =head2 Version number formats Acceptable version number formats have been formalized into "strict" and "lax" rules. C<package NAME VERSION> takes a strict version number. C<UNIVERSAL::VERSION> and the L<version> object constructors take lax version numbers. Providing an invalid version will result in a fatal error. The version argument in C<use NAME VERSION> is first parsed as a numeric literal or v-string and then passed to C<UNIVERSAL::VERSION> (and must then pass the "lax" format test). These formats are documented fully in the L<version> module. To a first approximation, a "strict" version number is a positive decimal number (integer or decimal-fraction) without exponentiation or else a dotted-decimal v-string with a leading 'v' character and at least three components. A "lax" version number allows v-strings with fewer than three components or without a leading 'v'. Under "lax" rules, both decimal and dotted-decimal versions may have a trailing "alpha" component separated by an underscore character after a fractional or dotted-decimal component. The L<version> module adds C<version::is_strict> and C<version::is_lax> functions to check a scalar against these rules. =head2 @INC reorganization In C<@INC>, C<ARCHLIB> and C<PRIVLIB> now occur after the current version's C<site_perl> and C<vendor_perl>. Modules installed into C<site_perl> and C<vendor_perl> will now be loaded in preference to those installed in C<ARCHLIB> and C<PRIVLIB>. =head2 REGEXPs are now first class Internally, Perl now treats compiled regular expressions (such as those created with C<qr//>) as first class entities. Perl modules which serialize, deserialize or otherwise have deep interaction with Perl's internal data structures need to be updated for this change. Most affected CPAN modules have already been updated as of this writing. =head2 Switch statement changes The C<given>/C<when> switch statement handles complex statements better than Perl 5.10.0 did (These enhancements are also available in 5.10.1 and subsequent 5.10 releases.) There are two new cases where C<when> now interprets its argument as a boolean, instead of an expression to be used in a smart match: =over =item flip-flop operators The C<..> and C<...> flip-flop operators are now evaluated in boolean context, following their usual semantics; see L<perlop/"Range Operators">. Note that, as in perl 5.10.0, C<when (1..10)> will not work to test whether a given value is an integer between 1 and 10; you should use C<when ([1..10])> instead (note the array reference). However, contrary to 5.10.0, evaluating the flip-flop operators in boolean context ensures it can now be useful in a C<when()>, notably for implementing bistable conditions, like in: when (/^=begin/ .. /^=end/) { # do something } =item defined-or operator A compound expression involving the defined-or operator, as in C<when (expr1 // expr2)>, will be treated as boolean if the first expression is boolean. (This just extends the existing rule that applies to the regular or operator, as in C<when (expr1 || expr2)>.) =back =head2 Smart match changes Since Perl 5.10.0, Perl's developers have made a number of changes to the smart match operator. These, of course, also alter the behaviour of the switch statements where smart matching is implicitly used. These changes were also made for the 5.10.1 release, and will remain in subsequent 5.10 releases. =head3 Changes to type-based dispatch The smart match operator C<~~> is no longer commutative. The behaviour of a smart match now depends primarily on the type of its right hand argument. Moreover, its semantics have been adjusted for greater consistency or usefulness in several cases. While the general backwards compatibility is maintained, several changes must be noted: =over 4 =item * Code references with an empty prototype are no longer treated specially. They are passed an argument like the other code references (even if they choose to ignore it). =item * C<%hash ~~ sub {}> and C<@array ~~ sub {}> now test that the subroutine returns a true value for each key of the hash (or element of the array), instead of passing the whole hash or array as a reference to the subroutine. =item * Due to the commutativity breakage, code references are no longer treated specially when appearing on the left of the C<~~> operator, but like any vulgar scalar. =item * C<undef ~~ %hash> is always false (since C<undef> can't be a key in a hash). No implicit conversion to C<""> is done (as was the case in perl 5.10.0). =item * C<$scalar ~~ @array> now always distributes the smart match across the elements of the array. It's true if one element in @array verifies C<$scalar ~~ $element>. This is a generalization of the old behaviour that tested whether the array contained the scalar. =back The full dispatch table for the smart match operator is given in L<perlsyn/"Smart matching in detail">. =head3 Smart match and overloading According to the rule of dispatch based on the rightmost argument type, when an object overloading C<~~> appears on the right side of the operator, the overload routine will always be called (with a 3rd argument set to a true value, see L<overload>.) However, when the object will appear on the left, the overload routine will be called only when the rightmost argument is a simple scalar. This way, distributivity of smart match across arrays is not broken, as well as the other behaviours with complex types (coderefs, hashes, regexes). Thus, writers of overloading routines for smart match mostly need to worry only with comparing against a scalar, and possibly with stringification overloading; the other common cases will be automatically handled consistently. C<~~> will now refuse to work on objects that do not overload it (in order to avoid relying on the object's underlying structure). (However, if the object overloads the stringification or the numification operators, and if overload fallback is active, it will be used instead, as usual.) =head2 Other potentially incompatible changes =over 4 =item * The definitions of a number of Unicode properties have changed to match those of the current Unicode standard. These are listed above under L</Unicode overhaul>. This change may break code that expects the old definitions. =item * The boolkeys op has moved to the group of hash ops. This breaks binary compatibility. =item * Filehandles are now always blessed into C<IO::File>. The previous behaviour was to bless Filehandles into L<FileHandle> (an empty proxy class) if it was loaded into memory and otherwise to bless them into C<IO::Handle>. =item * The semantics of C<use feature :5.10*> have changed slightly. See L</"Modules and Pragmata"> for more information. =item * Perl's developers now use git, rather than Perforce. This should be a purely internal change only relevant to people actively working on the core. However, you may see minor difference in perl as a consequence of the change. For example in some of details of the output of C<perl -V>. See L<perlrepository> for more information. =item * As part of the C<Test::Harness> 2.x to 3.x upgrade, the experimental C<Test::Harness::Straps> module has been removed. See L</"Modules and Pragmata"> for more details. =item * As part of the C<ExtUtils::MakeMaker> upgrade, the C<ExtUtils::MakeMaker::bytes> and C<ExtUtils::MakeMaker::vmsish> modules have been removed from this distribution. =item * C<Module::CoreList> no longer contains the C<%:patchlevel> hash. =item * C<length undef> now returns undef. =item * Unsupported private C API functions are now declared "static" to prevent leakage to Perl's public API. =item * To support the bootstrapping process, F<miniperl> no longer builds with UTF-8 support in the regexp engine. This allows a build to complete with PERL_UNICODE set and a UTF-8 locale. Without this there's a bootstrapping problem, as miniperl can't load the UTF-8 components of the regexp engine, because they're not yet built. =item * F<miniperl>'s @INC is now restricted to just C<-I...>, the split of C<$ENV{PERL5LIB}>, and "C<.>" =item * A space or a newline is now required after a C<"#line XXX"> directive. =item * Tied filehandles now have an additional method EOF which provides the EOF type. =item * To better match all other flow control statements, C<foreach> may no longer be used as an attribute. =item * Perl's command-line switch "-P", which was deprecated in version 5.10.0, has now been removed. The CPAN module C<< Filter::cpp >> can be used as an alternative. =back =head1 Deprecations From time to time, Perl's developers find it necessary to deprecate features or modules we've previously shipped as part of the core distribution. We are well aware of the pain and frustration that a backwards-incompatible change to Perl can cause for developers building or maintaining software in Perl. You can be sure that when we deprecate a functionality or syntax, it isn't a choice we make lightly. Sometimes, we choose to deprecate functionality or syntax because it was found to be poorly designed or implemented. Sometimes, this is because they're holding back other features or causing performance problems. Sometimes, the reasons are more complex. Wherever possible, we try to keep deprecated functionality available to developers in its previous form for at least one major release. So long as a deprecated feature isn't actively disrupting our ability to maintain and extend Perl, we'll try to leave it in place as long as possible. The following items are now deprecated: =over =item suidperl C<suidperl> is no longer part of Perl. It used to provide a mechanism to emulate setuid permission bits on systems that don't support it properly. =item Use of C<:=> to mean an empty attribute list An accident of Perl's parser meant that these constructions were all equivalent: my $pi := 4; my $pi : = 4; my $pi : = 4; with the C<:> being treated as the start of an attribute list, which ends before the C<=>. As whitespace is not significant here, all are parsed as an empty attribute list, hence all the above are equivalent to, and better written as my $pi = 4; because no attribute processing is done for an empty list. As is, this meant that C<:=> cannot be used as a new token, without silently changing the meaning of existing code. Hence that particular form is now deprecated, and will become a syntax error. If it is absolutely necessary to have empty attribute lists (for example, because of a code generator) then avoid the warning by adding a space before the C<=>. =item C<< UNIVERSAL->import() >> The method C<< UNIVERSAL->import() >> is now deprecated. Attempting to pass import arguments to a C<use UNIVERSAL> statement will result in a deprecation warning. =item Use of "goto" to jump into a construct Using C<goto> to jump from an outer scope into an inner scope is now deprecated. This rare use case was causing problems in the implementation of scopes. =item Custom character names in \N{name} that don't look like names In C<\N{I<name>}>, I<name> can be just about anything. The standard Unicode names have a very limited domain, but a custom name translator could create names that are, for example, made up entirely of punctuation symbols. It is now deprecated to make names that don't begin with an alphabetic character, and aren't alphanumeric or contain other than a very few other characters, namely spaces, dashes, parentheses and colons. Because of the added meaning of C<\N> (See L</C<\N> experimental regex escape>), names that look like curly brace -enclosed quantifiers won't work. For example, C<\N{3,4}> now means to match 3 to 4 non-newlines; before a custom name C<3,4> could have been created. =item Deprecated Modules The following modules will be removed from the core distribution in a future release, and should be installed from CPAN instead. Distributions on CPAN which require these should add them to their prerequisites. The core versions of these modules warnings will issue a deprecation warning. If you ship a packaged version of Perl, either alone or as part of a larger system, then you should carefully consider the repercussions of core module deprecations. You may want to consider shipping your default build of Perl with packages for some or all deprecated modules which install into C<vendor> or C<site> perl library directories. This will inhibit the deprecation warnings. Alternatively, you may want to consider patching F<lib/deprecate.pm> to provide deprecation warnings specific to your packaging system or distribution of Perl, consistent with how your packaging system or distribution manages a staged transition from a release where the installation of a single package provides the given functionality, to a later release where the system administrator needs to know to install multiple packages to get that same functionality. You can silence these deprecation warnings by installing the modules in question from CPAN. To install the latest version of all of them, just install C<Task::Deprecations::5_12>. =over =item L<Class::ISA> =item L<Pod::Plainer> =item L<Shell> =item L<Switch> Switch is buggy and should be avoided. You may find Perl's new C<given>/C<when> feature a suitable replacement. See L<perlsyn/"Switch statements"> for more information. =back =item Assignment to $[ =item Use of the attribute :locked on subroutines =item Use of "locked" with the attributes pragma =item Use of "unique" with the attributes pragma =item Perl_pmflag C<Perl_pmflag> is no longer part of Perl's public API. Calling it now generates a deprecation warning, and it will be removed in a future release. Although listed as part of the API, it was never documented, and only ever used in F<toke.c>, and prior to 5.10, F<regcomp.c>. In core, it has been replaced by a static function. =item Numerous Perl 4-era libraries F<termcap.pl>, F<tainted.pl>, F<stat.pl>, F<shellwords.pl>, F<pwd.pl>, F<open3.pl>, F<open2.pl>, F<newgetopt.pl>, F<look.pl>, F<find.pl>, F<finddepth.pl>, F<importenv.pl>, F<hostname.pl>, F<getopts.pl>, F<getopt.pl>, F<getcwd.pl>, F<flush.pl>, F<fastcwd.pl>, F<exceptions.pl>, F<ctime.pl>, F<complete.pl>, F<cacheout.pl>, F<bigrat.pl>, F<bigint.pl>, F<bigfloat.pl>, F<assert.pl>, F<abbrev.pl>, F<dotsh.pl>, and F<timelocal.pl> are all now deprecated. Earlier, Perl's developers intended to remove these libraries from Perl's core for the 5.14.0 release. During final testing before the release of 5.12.0, several developers discovered current production code using these ancient libraries, some inside the Perl core itself. Accordingly, the pumpking granted them a stay of execution. They will begin to warn about their deprecation in the 5.14.0 release and will be removed in the 5.16.0 release. =back =head1 Unicode overhaul Perl's developers have made a concerted effort to update Perl to be in sync with the latest Unicode standard. Changes for this include: Perl can now handle every Unicode character property. New documentation, L<perluniprops>, lists all available non-Unihan character properties. By default, perl does not expose Unihan, deprecated or Unicode-internal properties. See below for more details on these; there is also a section in the pod listing them, and explaining why they are not exposed. Perl now fully supports the Unicode compound-style of using C<=> and C<:> in writing regular expressions: C<\p{property=value}> and C<\p{property:value}> (both of which mean the same thing). Perl now fully supports the Unicode loose matching rules for text between the braces in C<\p{...}> constructs. In addition, Perl allows underscores between digits of numbers. Perl now accepts all the Unicode-defined synonyms for properties and property values. C<qr/\X/>, which matches a Unicode logical character, has been expanded to work better with various Asian languages. It now is defined as an I<extended grapheme cluster>. (See L<http://www.unicode.org/reports/tr29/>). Anything matched previously and that made sense will continue to be accepted. Additionally: =over =item * C<\X> will not break apart a C<S<CR LF>> sequence. =item * C<\X> will now match a sequence which includes the C<ZWJ> and C<ZWNJ> characters. =item * C<\X> will now always match at least one character, including an initial mark. Marks generally come after a base character, but it is possible in Unicode to have them in isolation, and C<\X> will now handle that case, for example at the beginning of a line, or after a C<ZWSP>. And this is the part where C<\X> doesn't match the things that it used to that don't make sense. Formerly, for example, you could have the nonsensical case of an accented LF. =item * C<\X> will now match a (Korean) Hangul syllable sequence, and the Thai and Lao exception cases. =back Otherwise, this change should be transparent for the non-affected languages. C<\p{...}> matches using the Canonical_Combining_Class property were completely broken in previous releases of Perl. They should now work correctly. Before Perl 5.12, the Unicode C<Decomposition_Type=Compat> property and a Perl extension had the same name, which led to neither matching all the correct values (with more than 100 mistakes in one, and several thousand in the other). The Perl extension has now been renamed to be C<Decomposition_Type=Noncanonical> (short: C<dt=noncanon>). It has the same meaning as was previously intended, namely the union of all the non-canonical Decomposition types, with Unicode C<Compat> being just one of those. C<\p{Decomposition_Type=Canonical}> now includes the Hangul syllables. C<\p{Uppercase}> and C<\p{Lowercase}> now work as the Unicode standard says they should. This means they each match a few more characters than they used to. C<\p{Cntrl}> now matches the same characters as C<\p{Control}>. This means it no longer will match Private Use (gc=co), Surrogates (gc=cs), nor Format (gc=cf) code points. The Format code points represent the biggest possible problem. All but 36 of them are either officially deprecated or strongly discouraged from being used. Of those 36, likely the most widely used are the soft hyphen (U+00AD), and BOM, ZWSP, ZWNJ, WJ, and similar characters, plus bidirectional controls. C<\p{Alpha}> now matches the same characters as C<\p{Alphabetic}>. Before 5.12, Perl's definition included a number of things that aren't really alpha (all marks) while omitting many that were. The definitions of C<\p{Alnum}> and C<\p{Word}> depend on Alpha's definition and have changed accordingly. C<\p{Word}> no longer incorrectly matches non-word characters such as fractions. C<\p{Print}> no longer matches the line control characters: Tab, LF, CR, FF, VT, and NEL. This brings it in line with standards and the documentation. C<\p{XDigit}> now matches the same characters as C<\p{Hex_Digit}>. This means that in addition to the characters it currently matches, C<[A-Fa-f0-9]>, it will also match the 22 fullwidth equivalents, for example U+FF10: FULLWIDTH DIGIT ZERO. The Numeric type property has been extended to include the Unihan characters. There is a new Perl extension, the 'Present_In', or simply 'In', property. This is an extension of the Unicode Age property, but C<\p{In=5.0}> matches any code point whose usage has been determined I<as of> Unicode version 5.0. The C<\p{Age=5.0}> only matches code points added in I<precisely> version 5.0. A number of properties now have the correct values for unassigned code points. The affected properties are Bidi_Class, East_Asian_Width, Joining_Type, Decomposition_Type, Hangul_Syllable_Type, Numeric_Type, and Line_Break. The Default_Ignorable_Code_Point, ID_Continue, and ID_Start properties are now up to date with current Unicode definitions. Earlier versions of Perl erroneously exposed certain properties that are supposed to be Unicode internal-only. Use of these in regular expressions will now generate, if enabled, a deprecation warning message. The properties are: Other_Alphabetic, Other_Default_Ignorable_Code_Point, Other_Grapheme_Extend, Other_ID_Continue, Other_ID_Start, Other_Lowercase, Other_Math, and Other_Uppercase. It is now possible to change which Unicode properties Perl understands on a per-installation basis. As mentioned above, certain properties are turned off by default. These include all the Unihan properties (which should be accessible via the CPAN module Unicode::Unihan) and any deprecated or Unicode internal-only property that Perl has never exposed. The generated files in the C<lib/unicore/To> directory are now more clearly marked as being stable, directly usable by applications. New hash entries in them give the format of the normal entries, which allows for easier machine parsing. Perl can generate files in this directory for any property, though most are suppressed. You can find instructions for changing which are written in L<perluniprops>. =head1 Modules and Pragmata =head2 New Modules and Pragmata =over 4 =item C<autodie> C<autodie> is a new lexically-scoped alternative for the C<Fatal> module. The bundled version is 2.06_01. Note that in this release, using a string eval when C<autodie> is in effect can cause the autodie behaviour to leak into the surrounding scope. See L<autodie/"BUGS"> for more details. Version 2.06_01 has been added to the Perl core. =item C<Compress::Raw::Bzip2> Version 2.024 has been added to the Perl core. =item C<overloading> C<overloading> allows you to lexically disable or enable overloading for some or all operations. Version 0.001 has been added to the Perl core. =item C<parent> C<parent> establishes an ISA relationship with base classes at compile time. It provides the key feature of C<base> without further unwanted behaviors. Version 0.223 has been added to the Perl core. =item C<Parse::CPAN::Meta> Version 1.40 has been added to the Perl core. =item C<VMS::DCLsym> Version 1.03 has been added to the Perl core. =item C<VMS::Stdio> Version 2.4 has been added to the Perl core. =item C<XS::APItest::KeywordRPN> Version 0.003 has been added to the Perl core. =back =head2 Updated Pragmata =over 4 =item C<base> Upgraded from version 2.13 to 2.15. =item C<bignum> Upgraded from version 0.22 to 0.23. =item C<charnames> C<charnames> now contains the Unicode F<NameAliases.txt> database file. This has the effect of adding some extra C<\N> character names that formerly wouldn't have been recognised; for example, C<"\N{LATIN CAPITAL LETTER GHA}">. Upgraded from version 1.06 to 1.07. =item C<constant> Upgraded from version 1.13 to 1.20. =item C<diagnostics> C<diagnostics> now supports %.0f formatting internally. C<diagnostics> no longer suppresses C<Use of uninitialized value in range (or flip)> warnings. [perl #71204] Upgraded from version 1.17 to 1.19. =item C<feature> In C<feature>, the meaning of the C<:5.10> and C<:5.10.X> feature bundles has changed slightly. The last component, if any (i.e. C<X>) is simply ignored. This is predicated on the assumption that new features will not, in general, be added to maintenance releases. So C<:5.10> and C<:5.10.X> have identical effect. This is a change to the behaviour documented for 5.10.0. C<feature> now includes the C<unicode_strings> feature: use feature "unicode_strings"; This pragma turns on Unicode semantics for the case-changing operations (C<uc>, C<lc>, C<ucfirst>, C<lcfirst>) on strings that don't have the internal UTF-8 flag set, but that contain single-byte characters between 128 and 255. Upgraded from version 1.11 to 1.16. =item C<less> C<less> now includes the C<stash_name> method to allow subclasses of C<less> to pick where in %^H to store their stash. Upgraded from version 0.02 to 0.03. =item C<lib> Upgraded from version 0.5565 to 0.62. =item C<mro> C<mro> is now implemented as an XS extension. The documented interface has not changed. Code relying on the implementation detail that some C<mro::> methods happened to be available at all times gets to "keep both pieces". Upgraded from version 1.00 to 1.02. =item C<overload> C<overload> now allow overloading of 'qr'. Upgraded from version 1.06 to 1.10. =item C<threads> Upgraded from version 1.67 to 1.75. =item C<threads::shared> Upgraded from version 1.14 to 1.32. =item C<version> C<version> now has support for L</Version number formats> as described earlier in this document and in its own documentation. Upgraded from version 0.74 to 0.82. =item C<warnings> C<warnings> has a new C<warnings::fatal_enabled()> function. It also includes a new C<illegalproto> warning category. See also L</New or Changed Diagnostics> for this change. Upgraded from version 1.06 to 1.09. =back =head2 Updated Modules =over 4 =item C<Archive::Extract> Upgraded from version 0.24 to 0.38. =item C<Archive::Tar> Upgraded from version 1.38 to 1.54. =item C<Attribute::Handlers> Upgraded from version 0.79 to 0.87. =item C<AutoLoader> Upgraded from version 5.63 to 5.70. =item C<B::Concise> Upgraded from version 0.74 to 0.78. =item C<B::Debug> Upgraded from version 1.05 to 1.12. =item C<B::Deparse> Upgraded from version 0.83 to 0.96. =item C<B::Lint> Upgraded from version 1.09 to 1.11_01. =item C<CGI> Upgraded from version 3.29 to 3.48. =item C<Class::ISA> Upgraded from version 0.33 to 0.36. NOTE: C<Class::ISA> is deprecated and may be removed from a future version of Perl. =item C<Compress::Raw::Zlib> Upgraded from version 2.008 to 2.024. =item C<CPAN> Upgraded from version 1.9205 to 1.94_56. =item C<CPANPLUS> Upgraded from version 0.84 to 0.90. =item C<CPANPLUS::Dist::Build> Upgraded from version 0.06_02 to 0.46. =item C<Data::Dumper> Upgraded from version 2.121_14 to 2.125. =item C<DB_File> Upgraded from version 1.816_1 to 1.820. =item C<Devel::PPPort> Upgraded from version 3.13 to 3.19. =item C<Digest> Upgraded from version 1.15 to 1.16. =item C<Digest::MD5> Upgraded from version 2.36_01 to 2.39. =item C<Digest::SHA> Upgraded from version 5.45 to 5.47. =item C<Encode> Upgraded from version 2.23 to 2.39. =item C<Exporter> Upgraded from version 5.62 to 5.64_01. =item C<ExtUtils::CBuilder> Upgraded from version 0.21 to 0.27. =item C<ExtUtils::Command> Upgraded from version 1.13 to 1.16. =item C<ExtUtils::Constant> Upgraded from version 0.2 to 0.22. =item C<ExtUtils::Install> Upgraded from version 1.44 to 1.55. =item C<ExtUtils::MakeMaker> Upgraded from version 6.42 to 6.56. =item C<ExtUtils::Manifest> Upgraded from version 1.51_01 to 1.57. =item C<ExtUtils::ParseXS> Upgraded from version 2.18_02 to 2.21. =item C<File::Fetch> Upgraded from version 0.14 to 0.24. =item C<File::Path> Upgraded from version 2.04 to 2.08_01. =item C<File::Temp> Upgraded from version 0.18 to 0.22. =item C<Filter::Simple> Upgraded from version 0.82 to 0.84. =item C<Filter::Util::Call> Upgraded from version 1.07 to 1.08. =item C<Getopt::Long> Upgraded from version 2.37 to 2.38. =item C<IO> Upgraded from version 1.23_01 to 1.25_02. =item C<IO::Zlib> Upgraded from version 1.07 to 1.10. =item C<IPC::Cmd> Upgraded from version 0.40_1 to 0.54. =item C<IPC::SysV> Upgraded from version 1.05 to 2.01. =item C<Locale::Maketext> Upgraded from version 1.12 to 1.14. =item C<Locale::Maketext::Simple> Upgraded from version 0.18 to 0.21. =item C<Log::Message> Upgraded from version 0.01 to 0.02. =item C<Log::Message::Simple> Upgraded from version 0.04 to 0.06. =item C<Math::BigInt> Upgraded from version 1.88 to 1.89_01. =item C<Math::BigInt::FastCalc> Upgraded from version 0.16 to 0.19. =item C<Math::BigRat> Upgraded from version 0.21 to 0.24. =item C<Math::Complex> Upgraded from version 1.37 to 1.56. =item C<Memoize> Upgraded from version 1.01_02 to 1.01_03. =item C<MIME::Base64> Upgraded from version 3.07_01 to 3.08. =item C<Module::Build> Upgraded from version 0.2808_01 to 0.3603. =item C<Module::CoreList> Upgraded from version 2.12 to 2.29. =item C<Module::Load> Upgraded from version 0.12 to 0.16. =item C<Module::Load::Conditional> Upgraded from version 0.22 to 0.34. =item C<Module::Loaded> Upgraded from version 0.01 to 0.06. =item C<Module::Pluggable> Upgraded from version 3.6 to 3.9. =item C<Net::Ping> Upgraded from version 2.33 to 2.36. =item C<NEXT> Upgraded from version 0.60_01 to 0.64. =item C<Object::Accessor> Upgraded from version 0.32 to 0.36. =item C<Package::Constants> Upgraded from version 0.01 to 0.02. =item C<PerlIO> Upgraded from version 1.04 to 1.06. =item C<Pod::Parser> Upgraded from version 1.35 to 1.37. =item C<Pod::Perldoc> Upgraded from version 3.14_02 to 3.15_02. =item C<Pod::Plainer> Upgraded from version 0.01 to 1.02. NOTE: C<Pod::Plainer> is deprecated and may be removed from a future version of Perl. =item C<Pod::Simple> Upgraded from version 3.05 to 3.13. =item C<Safe> Upgraded from version 2.12 to 2.22. =item C<SelfLoader> Upgraded from version 1.11 to 1.17. =item C<Storable> Upgraded from version 2.18 to 2.22. =item C<Switch> Upgraded from version 2.13 to 2.16. NOTE: C<Switch> is deprecated and may be removed from a future version of Perl. =item C<Sys::Syslog> Upgraded from version 0.22 to 0.27. =item C<Term::ANSIColor> Upgraded from version 1.12 to 2.02. =item C<Term::UI> Upgraded from version 0.18 to 0.20. =item C<Test> Upgraded from version 1.25 to 1.25_02. =item C<Test::Harness> Upgraded from version 2.64 to 3.17. =item C<Test::Simple> Upgraded from version 0.72 to 0.94. =item C<Text::Balanced> Upgraded from version 2.0.0 to 2.02. =item C<Text::ParseWords> Upgraded from version 3.26 to 3.27. =item C<Text::Soundex> Upgraded from version 3.03 to 3.03_01. =item C<Thread::Queue> Upgraded from version 2.00 to 2.11. =item C<Thread::Semaphore> Upgraded from version 2.01 to 2.09. =item C<Tie::RefHash> Upgraded from version 1.37 to 1.38. =item C<Time::HiRes> Upgraded from version 1.9711 to 1.9719. =item C<Time::Local> Upgraded from version 1.18 to 1.1901_01. =item C<Time::Piece> Upgraded from version 1.12 to 1.15. =item C<Unicode::Collate> Upgraded from version 0.52 to 0.52_01. =item C<Unicode::Normalize> Upgraded from version 1.02 to 1.03. =item C<Win32> Upgraded from version 0.34 to 0.39. =item C<Win32API::File> Upgraded from version 0.1001_01 to 0.1101. =item C<XSLoader> Upgraded from version 0.08 to 0.10. =back =head2 Removed Modules and Pragmata =over 4 =item C<attrs> Removed from the Perl core. Prior version was 1.02. =item C<CPAN::API::HOWTO> Removed from the Perl core. Prior version was 'undef'. =item C<CPAN::DeferedCode> Removed from the Perl core. Prior version was 5.50. =item C<CPANPLUS::inc> Removed from the Perl core. Prior version was 'undef'. =item C<DCLsym> Removed from the Perl core. Prior version was 1.03. =item C<ExtUtils::MakeMaker::bytes> Removed from the Perl core. Prior version was 6.42. =item C<ExtUtils::MakeMaker::vmsish> Removed from the Perl core. Prior version was 6.42. =item C<Stdio> Removed from the Perl core. Prior version was 2.3. =item C<Test::Harness::Assert> Removed from the Perl core. Prior version was 0.02. =item C<Test::Harness::Iterator> Removed from the Perl core. Prior version was 0.02. =item C<Test::Harness::Point> Removed from the Perl core. Prior version was 0.01. =item C<Test::Harness::Results> Removed from the Perl core. Prior version was 0.01. =item C<Test::Harness::Straps> Removed from the Perl core. Prior version was 0.26_01. =item C<Test::Harness::Util> Removed from the Perl core. Prior version was 0.01. =item C<XSSymSet> Removed from the Perl core. Prior version was 1.1. =back =head2 Deprecated Modules and Pragmata See L</Deprecated Modules> above. =head1 Documentation =head2 New Documentation =over 4 =item * L<perlhaiku> contains instructions on how to build perl for the Haiku platform. =item * L<perlmroapi> describes the new interface for pluggable Method Resolution Orders. =item * L<perlperf>, by Richard Foley, provides an introduction to the use of performance and optimization techniques which can be used with particular reference to perl programs. =item * L<perlrepository> describes how to access the perl source using the I<git> version control system. =item * L<perlpolicy> extends the "Social contract about contributed modules" into the beginnings of a document on Perl porting policies. =back =head2 Changes to Existing Documentation =over =item * The various large F<Changes*> files (which listed every change made to perl over the last 18 years) have been removed, and replaced by a small file, also called F<Changes>, which just explains how that same information may be extracted from the git version control system. =item * F<Porting/patching.pod> has been deleted, as it mainly described interacting with the old Perforce-based repository, which is now obsolete. Information still relevant has been moved to L<perlrepository>. =item * The syntax C<unless (EXPR) BLOCK else BLOCK> is now documented as valid, as is the syntax C<unless (EXPR) BLOCK elsif (EXPR) BLOCK ... else BLOCK>, although actually using the latter may not be the best idea for the readability of your source code. =item * Documented -X overloading. =item * Documented that C<when()> treats specially most of the filetest operators =item * Documented C<when> as a syntax modifier. =item * Eliminated "Old Perl threads tutorial", which described 5005 threads. F<pod/perlthrtut.pod> is the same material reworked for ithreads. =item * Correct previous documentation: v-strings are not deprecated With version objects, we need them to use MODULE VERSION syntax. This patch removes the deprecation notice. =item * Security contact information is now part of L<perlsec>. =item * A significant fraction of the core documentation has been updated to clarify the behavior of Perl's Unicode handling. Much of the remaining core documentation has been reviewed and edited for clarity, consistent use of language, and to fix the spelling of Tom Christiansen's name. =item * The Pod specification (L<perlpodspec>) has been updated to bring the specification in line with modern usage already supported by most Pod systems. A parameter string may now follow the format name in a "begin/end" region. Links to URIs with a text description are now allowed. The usage of C<LE<lt>"section"E<gt>> has been marked as deprecated. =item * L<if.pm|if> has been documented in L<perlfunc/use> as a means to get conditional loading of modules despite the implicit BEGIN block around C<use>. =item * The documentation for C<$1> in perlvar.pod has been clarified. =item * C<\N{U+I<code point>}> is now documented. =back =head1 Selected Performance Enhancements =over 4 =item * A new internal cache means that C<isa()> will often be faster. =item * The implementation of C<C3> Method Resolution Order has been optimised - linearisation for classes with single inheritance is 40% faster. Performance for multiple inheritance is unchanged. =item * Under C<use locale>, the locale-relevant information is now cached on read-only values, such as the list returned by C<keys %hash>. This makes operations such as C<sort keys %hash> in the scope of C<use locale> much faster. =item * Empty C<DESTROY> methods are no longer called. =item * C<Perl_sv_utf8_upgrade()> is now faster. =item * C<keys> on empty hash is now faster. =item * C<if (%foo)> has been optimized to be faster than C<if (keys %foo)>. =item * The string repetition operator (C<$str x $num>) is now several times faster when C<$str> has length one or C<$num> is large. =item * Reversing an array to itself (as in C<@a = reverse @a>) in void context now happens in-place and is several orders of magnitude faster than it used to be. It will also preserve non-existent elements whenever possible, i.e. for non magical arrays or tied arrays with C<EXISTS> and C<DELETE> methods. =back =head1 Installation and Configuration Improvements =over 4 =item * L<perlapi>, L<perlintern>, L<perlmodlib> and L<perltoc> are now all generated at build time, rather than being shipped as part of the release. =item * If C<vendorlib> and C<vendorarch> are the same, then they are only added to C<@INC> once. =item * C<$Config{usedevel}> and the C-level C<PERL_USE_DEVEL> are now defined if perl is built with C<-Dusedevel>. =item * F<Configure> will enable use of C<-fstack-protector>, to provide protection against stack-smashing attacks, if the compiler supports it. =item * F<Configure> will now determine the correct prototypes for re-entrant functions and for C<gconvert> if you are using a C++ compiler rather than a C compiler. =item * On Unix, if you build from a tree containing a git repository, the configuration process will note the commit hash you have checked out, for display in the output of C<perl -v> and C<perl -V>. Unpushed local commits are automatically added to the list of local patches displayed by C<perl -V>. =item * Perl now supports SystemTap's C<dtrace> compatibility layer and an issue with linking C<miniperl> has been fixed in the process. =item * perldoc now uses C<less -R> instead of C<less> for improved behaviour in the face of C<groff>'s new usage of ANSI escape codes. =item * C<perl -V> now reports use of the compile-time options C<USE_PERL_ATOF> and C<USE_ATTRIBUTES_FOR_PERLIO>. =item * As part of the flattening of F<ext>, all extensions on all platforms are built by F<make_ext.pl>. This replaces the Unix-specific F<ext/util/make_ext>, VMS-specific F<make_ext.com> and Win32-specific F<win32/buildext.pl>. =back =head1 Internal Changes Each release of Perl sees numerous internal changes which shouldn't affect day to day usage but may still be notable for developers working with Perl's source code. =over =item * The J.R.R. Tolkien quotes at the head of C source file have been checked and proper citations added, thanks to a patch from Tom Christiansen. =item * The internal structure of the dual-life modules traditionally found in the F<lib/> and F<ext/> directories in the perl source has changed significantly. Where possible, dual-lifed modules have been extracted from F<lib/> and F<ext/>. Dual-lifed modules maintained by Perl's developers as part of the Perl core now live in F<dist/>. Dual-lifed modules maintained primarily on CPAN now live in F<cpan/>. When reporting a bug in a module located under F<cpan/>, please send your bug report directly to the module's bug tracker or author, rather than Perl's bug tracker. =item * C<\N{...}> now compiles better, always forces UTF-8 internal representation Perl's developers have fixed several problems with the recognition of C<\N{...}> constructs. As part of this, perl will store any scalar or regex containing C<\N{I<name>}> or C<\N{U+I<code point>}> in its definition in UTF-8 format. (This was true previously for all occurrences of C<\N{I<name>}> that did not use a custom translator, but now it's always true.) =item * Perl_magic_setmglob now knows about globs, fixing RT #71254. =item * C<SVt_RV> no longer exists. RVs are now stored in IVs. =item * C<Perl_vcroak()> now accepts a null first argument. In addition, a full audit was made of the "not NULL" compiler annotations, and those for several other internal functions were corrected. =item * New macros C<dSAVEDERRNO>, C<dSAVE_ERRNO>, C<SAVE_ERRNO>, C<RESTORE_ERRNO> have been added to formalise the temporary saving of the C<errno> variable. =item * The function C<Perl_sv_insert_flags> has been added to augment C<Perl_sv_insert>. =item * The function C<Perl_newSV_type(type)> has been added, equivalent to C<Perl_newSV()> followed by C<Perl_sv_upgrade(type)>. =item * The function C<Perl_newSVpvn_flags()> has been added, equivalent to C<Perl_newSVpvn()> and then performing the action relevant to the flag. Two flag bits are currently supported. =over 4 =item * C<SVf_UTF8> will call C<SvUTF8_on()> for you. (Note that this does not convert a sequence of ISO 8859-1 characters to UTF-8). A wrapper, C<newSVpvn_utf8()> is available for this. =item * C<SVs_TEMP> now calls C<Perl_sv_2mortal()> on the new SV. =back There is also a wrapper that takes constant strings, C<newSVpvs_flags()>. =item * The function C<Perl_croak_xs_usage> has been added as a wrapper to C<Perl_croak>. =item * Perl now exports the functions C<PerlIO_find_layer> and C<PerlIO_list_alloc>. =item * C<PL_na> has been exterminated from the core code, replaced by local STRLEN temporaries, or C<*_nolen()> calls. Either approach is faster than C<PL_na>, which is a pointer dereference into the interpreter structure under ithreads, and a global variable otherwise. =item * C<Perl_mg_free()> used to leave freed memory accessible via C<SvMAGIC()> on the scalar. It now updates the linked list to remove each piece of magic as it is freed. =item * Under ithreads, the regex in C<PL_reg_curpm> is now reference counted. This eliminates a lot of hackish workarounds to cope with it not being reference counted. =item * C<Perl_mg_magical()> would sometimes incorrectly turn on C<SvRMAGICAL()>. This has been fixed. =item * The I<public> IV and NV flags are now not set if the string value has trailing "garbage". This behaviour is consistent with not setting the public IV or NV flags if the value is out of range for the type. =item * Uses of C<Nullav>, C<Nullcv>, C<Nullhv>, C<Nullop>, C<Nullsv> etc have been replaced by C<NULL> in the core code, and non-dual-life modules, as C<NULL> is clearer to those unfamiliar with the core code. =item * A macro C<MUTABLE_PTR(p)> has been added, which on (non-pedantic) gcc will not cast away C<const>, returning a C<void *>. Macros C<MUTABLE_SV(av)>, C<MUTABLE_SV(cv)> etc build on this, casting to C<AV *> etc without casting away C<const>. This allows proper compile-time auditing of C<const> correctness in the core, and helped picked up some errors (now fixed). =item * Macros C<mPUSHs()> and C<mXPUSHs()> have been added, for pushing SVs on the stack and mortalizing them. =item * Use of the private structure C<mro_meta> has changed slightly. Nothing outside the core should be accessing this directly anyway. =item * A new tool, F<Porting/expand-macro.pl> has been added, that allows you to view how a C preprocessor macro would be expanded when compiled. This is handy when trying to decode the macro hell that is the perl guts. =back =head1 Testing =head2 Testing improvements =over 4 =item Parallel tests The core distribution can now run its regression tests in parallel on Unix-like platforms. Instead of running C<make test>, set C<TEST_JOBS> in your environment to the number of tests to run in parallel, and run C<make test_harness>. On a Bourne-like shell, this can be done as TEST_JOBS=3 make test_harness # Run 3 tests in parallel An environment variable is used, rather than parallel make itself, because L<TAP::Harness> needs to be able to schedule individual non-conflicting test scripts itself, and there is no standard interface to C<make> utilities to interact with their job schedulers. Note that currently some test scripts may fail when run in parallel (most notably C<ext/IO/t/io_dir.t>). If necessary run just the failing scripts again sequentially and see if the failures go away. =item Test harness flexibility It's now possible to override C<PERL5OPT> and friends in F<t/TEST> =item Test watchdog Several tests that have the potential to hang forever if they fail now incorporate a "watchdog" functionality that will kill them after a timeout, which helps ensure that C<make test> and C<make test_harness> run to completion automatically. =back =head2 New Tests Perl's developers have added a number of new tests to the core. In addition to the items listed below, many modules updated from CPAN incorporate new tests. =over 4 =item * Significant cleanups to core tests to ensure that language and interpreter features are not used before they're tested. =item * C<make test_porting> now runs a number of important pre-commit checks which might be of use to anyone working on the Perl core. =item * F<t/porting/podcheck.t> automatically checks the well-formedness of POD found in all .pl, .pm and .pod files in the F<MANIFEST>, other than in dual-lifed modules which are primarily maintained outside the Perl core. =item * F<t/porting/manifest.t> now tests that all files listed in MANIFEST are present. =item * F<t/op/while_readdir.t> tests that a bare readdir in while loop sets $_. =item * F<t/comp/retainedlines.t> checks that the debugger can retain source lines from C<eval>. =item * F<t/io/perlio_fail.t> checks that bad layers fail. =item * F<t/io/perlio_leaks.t> checks that PerlIO layers are not leaking. =item * F<t/io/perlio_open.t> checks that certain special forms of open work. =item * F<t/io/perlio.t> includes general PerlIO tests. =item * F<t/io/pvbm.t> checks that there is no unexpected interaction between the internal types C<PVBM> and C<PVGV>. =item * F<t/mro/package_aliases.t> checks that mro works properly in the presence of aliased packages. =item * F<t/op/dbm.t> tests C<dbmopen> and C<dbmclose>. =item * F<t/op/index_thr.t> tests the interaction of C<index> and threads. =item * F<t/op/pat_thr.t> tests the interaction of esoteric patterns and threads. =item * F<t/op/qr_gc.t> tests that C<qr> doesn't leak. =item * F<t/op/reg_email_thr.t> tests the interaction of regex recursion and threads. =item * F<t/op/regexp_qr_embed_thr.t> tests the interaction of patterns with embedded C<qr//> and threads. =item * F<t/op/regexp_unicode_prop.t> tests Unicode properties in regular expressions. =item * F<t/op/regexp_unicode_prop_thr.t> tests the interaction of Unicode properties and threads. =item * F<t/op/reg_nc_tie.t> tests the tied methods of C<Tie::Hash::NamedCapture>. =item * F<t/op/reg_posixcc.t> checks that POSIX character classes behave consistently. =item * F<t/op/re.t> checks that exportable C<re> functions in F<universal.c> work. =item * F<t/op/setpgrpstack.t> checks that C<setpgrp> works. =item * F<t/op/substr_thr.t> tests the interaction of C<substr> and threads. =item * F<t/op/upgrade.t> checks that upgrading and assigning scalars works. =item * F<t/uni/lex_utf8.t> checks that Unicode in the lexer works. =item * F<t/uni/tie.t> checks that Unicode and C<tie> work. =item * F<t/comp/final_line_num.t> tests whether line numbers are correct at EOF =item * F<t/comp/form_scope.t> tests format scoping. =item * F<t/comp/line_debug.t> tests whether C<< @{"_<$file"} >> works. =item * F<t/op/filetest_t.t> tests if -t file test works. =item * F<t/op/qr.t> tests C<qr>. =item * F<t/op/utf8cache.t> tests malfunctions of the utf8 cache. =item * F<t/re/uniprops.t> test unicodes C<\p{}> regex constructs. =item * F<t/op/filehandle.t> tests some suitably portable filetest operators to check that they work as expected, particularly in the light of some internal changes made in how filehandles are blessed. =item * F<t/op/time_loop.t> tests that unix times greater than C<2**63>, which can now be handed to C<gmtime> and C<localtime>, do not cause an internal overflow or an excessively long loop. =back =head1 New or Changed Diagnostics =head2 New Diagnostics =over =item * SV allocation tracing has been added to the diagnostics enabled by C<-Dm>. The tracing can alternatively output via the C<PERL_MEM_LOG> mechanism, if that was enabled when the F<perl> binary was compiled. =item * Smartmatch resolution tracing has been added as a new diagnostic. Use C<-DM> to enable it. =item * A new debugging flag C<-DB> now dumps subroutine definitions, leaving C<-Dx> for its original purpose of dumping syntax trees. =item * Perl 5.12 provides a number of new diagnostic messages to help you write better code. See L<perldiag> for details of these new messages. =over 4 =item * C<Bad plugin affecting keyword '%s'> =item * C<gmtime(%.0f) too large> =item * C<Lexing code attempted to stuff non-Latin-1 character into Latin-1 input> =item * C<Lexing code internal error (%s)> =item * C<localtime(%.0f) too large> =item * C<Overloaded dereference did not return a reference> =item * C<Overloaded qr did not return a REGEXP> =item * C<Perl_pmflag() is deprecated, and will be removed from the XS API> =item * C<lvalue attribute ignored after the subroutine has been defined> This new warning is issued when one attempts to mark a subroutine as lvalue after it has been defined. =item * Perl now warns you if C<++> or C<--> are unable to change the value because it's beyond the limit of representation. This uses a new warnings category: "imprecision". =item * C<lc>, C<uc>, C<lcfirst>, and C<ucfirst> warn when passed undef. =item * C<Show constant in "Useless use of a constant in void context"> =item * C<Prototype after '%s'> =item * C<panic: sv_chop %s> This new fatal error occurs when the C routine C<Perl_sv_chop()> was passed a position that is not within the scalar's string buffer. This could be caused by buggy XS code, and at this point recovery is not possible. =item * The fatal error C<Malformed UTF-8 returned by \N> is now produced if the C<charnames> handler returns malformed UTF-8. =item * If an unresolved named character or sequence was encountered when compiling a regex pattern then the fatal error C<\N{NAME} must be resolved by the lexer> is now produced. This can happen, for example, when using a single-quotish context like C<$re = '\N{SPACE}'; /$re/;>. See L<perldiag> for more examples of how the lexer can get bypassed. =item * C<Invalid hexadecimal number in \N{U+...}> is a new fatal error triggered when the character constant represented by C<...> is not a valid hexadecimal number. =item * The new meaning of C<\N> as C<[^\n]> is not valid in a bracketed character class, just like C<.> in a character class loses its special meaning, and will cause the fatal error C<\N in a character class must be a named character: \N{...}>. =item * The rules on what is legal for the C<...> in C<\N{...}> have been tightened up so that unless the C<...> begins with an alphabetic character and continues with a combination of alphanumerics, dashes, spaces, parentheses or colons then the warning C<Deprecated character(s) in \N{...} starting at '%s'> is now issued. =item * The warning C<Using just the first characters returned by \N{}> will be issued if the C<charnames> handler returns a sequence of characters which exceeds the limit of the number of characters that can be used. The message will indicate which characters were used and which were discarded. =back =back =head2 Changed Diagnostics A number of existing diagnostic messages have been improved or corrected: =over =item * A new warning category C<illegalproto> allows finer-grained control of warnings around function prototypes. The two warnings: =over =item C<Illegal character in prototype for %s : %s> =item C<Prototype after '%c' for %s : %s> =back have been moved from the C<syntax> top-level warnings category into a new first-level category, C<illegalproto>. These two warnings are currently the only ones emitted during parsing of an invalid/illegal prototype, so one can now use no warnings 'illegalproto'; to suppress only those, but not other syntax-related warnings. Warnings where prototypes are changed, ignored, or not met are still in the C<prototype> category as before. =item * C<Deep recursion on subroutine "%s"> It is now possible to change the depth threshold for this warning from the default of 100, by recompiling the F<perl> binary, setting the C pre-processor macro C<PERL_SUB_DEPTH_WARN> to the desired value. =item * C<Illegal character in prototype> warning is now more precise when reporting illegal characters after _ =item * mro merging error messages are now very similar to those produced by L<Algorithm::C3>. =item * Amelioration of the error message "Unrecognized character %s in column %d" Changes the error message to "Unrecognized character %s; marked by E<lt>-- HERE after %sE<lt>-- HERE near column %d". This should make it a little simpler to spot and correct the suspicious character. =item * Perl now explicitly points to C<$.> when it causes an uninitialized warning for ranges in scalar context. =item * C<split> now warns when called in void context. =item * C<printf>-style functions called with too few arguments will now issue the warning C<"Missing argument in %s"> [perl #71000] =item * Perl now properly returns a syntax error instead of segfaulting if C<each>, C<keys>, or C<values> is used without an argument. =item * C<tell()> now fails properly if called without an argument and when no previous file was read. C<tell()> now returns C<-1>, and sets errno to C<EBADF>, thus restoring the 5.8.x behaviour. =item * C<overload> no longer implicitly unsets fallback on repeated 'use overload' lines. =item * POSIX::strftime() can now handle Unicode characters in the format string. =item * The C<syntax> category was removed from 5 warnings that should only be in C<deprecated>. =item * Three fatal C<pack>/C<unpack> error messages have been normalized to C<panic: %s> =item * C<Unicode character is illegal> has been rephrased to be more accurate It now reads C<Unicode non-character is illegal in interchange> and the perldiag documentation has been expanded a bit. =item * Currently, all but the first of the several characters that the C<charnames> handler may return are discarded when used in a regular expression pattern bracketed character class. If this happens then the warning C<Using just the first character returned by \N{} in character class> will be issued. =item * The warning C<Missing right brace on \N{} or unescaped left brace after \N. Assuming the latter> will be issued if Perl encounters a C<\N{> but doesn't find a matching C<}>. In this case Perl doesn't know if it was mistakenly omitted, or if "match non-newline" followed by "match a C<{>" was desired. It assumes the latter because that is actually a valid interpretation as written, unlike the other case. If you meant the former, you need to add the matching right brace. If you did mean the latter, you can silence this warning by writing instead C<\N\{>. =item * C<gmtime> and C<localtime> called with numbers smaller than they can reliably handle will now issue the warnings C<gmtime(%.0f) too small> and C<localtime(%.0f) too small>. =back The following diagnostic messages have been removed: =over 4 =item * C<Runaway format> =item * C<Can't locate package %s for the parents of %s> In general this warning it only got produced in conjunction with other warnings, and removing it allowed an ISA lookup optimisation to be added. =item * C<v-string in use/require is non-portable> =back =head1 Utility Changes =over 4 =item * F<h2ph> now looks in C<include-fixed> too, which is a recent addition to gcc's search path. =item * F<h2xs> no longer incorrectly treats enum values like macros. It also now handles C++ style comments (C<//>) properly in enums. =item * F<perl5db.pl> now supports C<LVALUE> subroutines. Additionally, the debugger now correctly handles proxy constant subroutines, and subroutine stubs. =item * F<perlbug> now uses C<%Module::CoreList::bug_tracker> to print out upstream bug tracker URLs. If a user identifies a particular module as the topic of their bug report and we're able to divine the URL for its upstream bug tracker, perlbug now provide a message to the user explaining that the core copies the CPAN version directly, and provide the URL for reporting the bug directly to the upstream author. F<perlbug> no longer reports "Message sent" when it hasn't actually sent the message =item * F<perlthanks> is a new utility for sending non-bug-reports to the authors and maintainers of Perl. Getting nothing but bug reports can become a bit demoralising. If Perl 5.12 works well for you, please try out F<perlthanks>. It will make the developers smile. =item * Perl's developers have fixed bugs in F<a2p> having to do with the C<match()> operator in list context. Additionally, F<a2p> no longer generates code that uses the C<$[> variable. =back =head1 Selected Bug Fixes =over 4 =item * U+0FFFF is now a legal character in regular expressions. =item * pp_qr now always returns a new regexp SV. Resolves RT #69852. Instead of returning a(nother) reference to the (pre-compiled) regexp in the optree, use reg_temp_copy() to create a copy of it, and return a reference to that. This resolves issues about Regexp::DESTROY not being called in a timely fashion (the original bug tracked by RT #69852), as well as bugs related to blessing regexps, and of assigning to regexps, as described in correspondence added to the ticket. It transpires that we also need to undo the SvPVX() sharing when ithreads cloning a Regexp SV, because mother_re is set to NULL, instead of a cloned copy of the mother_re. This change might fix bugs with regexps and threads in certain other situations, but as yet neither tests nor bug reports have indicated any problems, so it might not actually be an edge case that it's possible to reach. =item * Several compilation errors and segfaults when perl was built with C<-Dmad> were fixed. =item * Fixes for lexer API changes in 5.11.2 which broke NYTProf's savesrc option. =item * C<-t> should only return TRUE for file handles connected to a TTY The Microsoft C version of C<isatty()> returns TRUE for all character mode devices, including the F</dev/null>-style "nul" device and printers like "lpt1". =item * Fixed a regression caused by commit fafafbaf which caused a panic during parameter passing [perl #70171] =item * On systems which in-place edits without backup files, -i'*' now works as the documentation says it does [perl #70802] =item * Saving and restoring magic flags no longer loses readonly flag. =item * The malformed syntax C<grep EXPR LIST> (note the missing comma) no longer causes abrupt and total failure. =item * Regular expressions compiled with C<qr{}> literals properly set C<$'> when matching again. =item * Using named subroutines with C<sort> should no longer lead to bus errors [perl #71076] =item * Numerous bugfixes catch small issues caused by the recently-added Lexer API. =item * Smart match against C<@_> sometimes gave false negatives. [perl #71078] =item * C<$@> may now be assigned a read-only value (without error or busting the stack). =item * C<sort> called recursively from within an active comparison subroutine no longer causes a bus error if run multiple times. [perl #71076] =item * Tie::Hash::NamedCapture::* will not abort if passed bad input (RT #71828) =item * @_ and $_ no longer leak under threads (RT #34342 and #41138, also #70602, #70974) =item * C<-I> on shebang line now adds directories in front of @INC as documented, and as does C<-I> when specified on the command-line. =item * C<kill> is now fatal when called on non-numeric process identifiers. Previously, an C<undef> process identifier would be interpreted as a request to kill process 0, which would terminate the current process group on POSIX systems. Since process identifiers are always integers, killing a non-numeric process is now fatal. =item * 5.10.0 inadvertently disabled an optimisation, which caused a measurable performance drop in list assignment, such as is often used to assign function parameters from C<@_>. The optimisation has been re-instated, and the performance regression fixed. (This fix is also present in 5.10.1) =item * Fixed memory leak on C<while (1) { map 1, 1 }> [RT #53038]. =item * Some potential coredumps in PerlIO fixed [RT #57322,54828]. =item * The debugger now works with lvalue subroutines. =item * The debugger's C<m> command was broken on modules that defined constants [RT #61222]. =item * C<crypt> and string complement could return tainted values for untainted arguments [RT #59998]. =item * The C<-i>I<.suffix> command-line switch now recreates the file using restricted permissions, before changing its mode to match the original file. This eliminates a potential race condition [RT #60904]. =item * On some Unix systems, the value in C<$?> would not have the top bit set (C<$? & 128>) even if the child core dumped. =item * Under some circumstances, C<$^R> could incorrectly become undefined [RT #57042]. =item * In the XS API, various hash functions, when passed a pre-computed hash where the key is UTF-8, might result in an incorrect lookup. =item * XS code including F<XSUB.h> before F<perl.h> gave a compile-time error [RT #57176]. =item * C<< $object-E<gt>isa('Foo') >> would report false if the package C<Foo> didn't exist, even if the object's C<@ISA> contained C<Foo>. =item * Various bugs in the new-to 5.10.0 mro code, triggered by manipulating C<@ISA>, have been found and fixed. =item * Bitwise operations on references could crash the interpreter, e.g. C<$x=\$y; $x |= "foo"> [RT #54956]. =item * Patterns including alternation might be sensitive to the internal UTF-8 representation, e.g. my $byte = chr(192); my $utf8 = chr(192); utf8::upgrade($utf8); $utf8 =~ /$byte|X}/i; # failed in 5.10.0 =item * Within UTF8-encoded Perl source files (i.e. where C<use utf8> is in effect), double-quoted literal strings could be corrupted where a C<\xNN>, C<\0NNN> or C<\N{}> is followed by a literal character with ordinal value greater than 255 [RT #59908]. =item * C<B::Deparse> failed to correctly deparse various constructs: C<readpipe STRING> [RT #62428], C<CORE::require(STRING)> [RT #62488], C<sub foo(_)> [RT #62484]. =item * Using C<setpgrp> with no arguments could corrupt the perl stack. =item * The block form of C<eval> is now specifically trappable by C<Safe> and C<ops>. Previously it was erroneously treated like string C<eval>. =item * In 5.10.0, the two characters C<[~> were sometimes parsed as the smart match operator (C<~~>) [RT #63854]. =item * In 5.10.0, the C<*> quantifier in patterns was sometimes treated as C<{0,32767}> [RT #60034, #60464]. For example, this match would fail: ("ab" x 32768) =~ /^(ab)*$/ =item * C<shmget> was limited to a 32 bit segment size on a 64 bit OS [RT #63924]. =item * Using C<next> or C<last> to exit a C<given> block no longer produces a spurious warning like the following: Exiting given via last at foo.pl line 123 =item * Assigning a format to a glob could corrupt the format; e.g.: *bar=*foo{FORMAT}; # foo format now bad =item * Attempting to coerce a typeglob to a string or number could cause an assertion failure. The correct error message is now generated, C<Can't coerce GLOB to I<$type>>. =item * Under C<use filetest 'access'>, C<-x> was using the wrong access mode. This has been fixed [RT #49003]. =item * C<length> on a tied scalar that returned a Unicode value would not be correct the first time. This has been fixed. =item * Using an array C<tie> inside in array C<tie> could SEGV. This has been fixed. [RT #51636] =item * A race condition inside C<PerlIOStdio_close()> has been identified and fixed. This used to cause various threading issues, including SEGVs. =item * In C<unpack>, the use of C<()> groups in scalar context was internally placing a list on the interpreter's stack, which manifested in various ways, including SEGVs. This is now fixed [RT #50256]. =item * Magic was called twice in C<substr>, C<\&$x>, C<tie $x, $m> and C<chop>. These have all been fixed. =item * A 5.10.0 optimisation to clear the temporary stack within the implicit loop of C<s///ge> has been reverted, as it turned out to be the cause of obscure bugs in seemingly unrelated parts of the interpreter [commit ef0d4e17921ee3de]. =item * The line numbers for warnings inside C<elsif> are now correct. =item * The C<..> operator now works correctly with ranges whose ends are at or close to the values of the smallest and largest integers. =item * C<binmode STDIN, ':raw'> could lead to segmentation faults on some platforms. This has been fixed [RT #54828]. =item * An off-by-one error meant that C<index $str, ...> was effectively being executed as C<index "$str\0", ...>. This has been fixed [RT #53746]. =item * Various leaks associated with named captures in regexes have been fixed [RT #57024]. =item * A weak reference to a hash would leak. This was affecting C<DBI> [RT #56908]. =item * Using (?|) in a regex could cause a segfault [RT #59734]. =item * Use of a UTF-8 C<tr//> within a closure could cause a segfault [RT #61520]. =item * Calling C<Perl_sv_chop()> or otherwise upgrading an SV could result in an unaligned 64-bit access on the SPARC architecture [RT #60574]. =item * In the 5.10.0 release, C<inc_version_list> would incorrectly list C<5.10.*> after C<5.8.*>; this affected the C<@INC> search order [RT #67628]. =item * In 5.10.0, C<pack "a*", $tainted_value> returned a non-tainted value [RT #52552]. =item * In 5.10.0, C<printf> and C<sprintf> could produce the fatal error C<panic: utf8_mg_pos_cache_update> when printing UTF-8 strings [RT #62666]. =item * In the 5.10.0 release, a dynamically created C<AUTOLOAD> method might be missed (method cache issue) [RT #60220,60232]. =item * In the 5.10.0 release, a combination of C<use feature> and C<//ee> could cause a memory leak [RT #63110]. =item * C<-C> on the shebang (C<#!>) line is once more permitted if it is also specified on the command line. C<-C> on the shebang line used to be a silent no-op I<if> it was not also on the command line, so perl 5.10.0 disallowed it, which broke some scripts. Now perl checks whether it is also on the command line and only dies if it is not [RT #67880]. =item * In 5.10.0, certain types of re-entrant regular expression could crash, or cause the following assertion failure [RT #60508]: Assertion rx->sublen >= (s - rx->subbeg) + i failed =item * Perl now includes previously missing files from the Unicode Character Database. =item * Perl now honors C<TMPDIR> when opening an anonymous temporary file. =back =head1 Platform Specific Changes Perl is incredibly portable. In general, if a platform has a C compiler, someone has ported Perl to it (or will soon). We're happy to announce that Perl 5.12 includes support for several new platforms. At the same time, it's time to bid farewell to some (very) old friends. =head2 New Platforms =over =item Haiku Perl's developers have merged patches from Haiku's maintainers. Perl should now build on Haiku. =item MirOS BSD Perl should now build on MirOS BSD. =back =head2 Discontinued Platforms =over =item Domain/OS =item MiNT =item Tenon MachTen =back =head2 Updated Platforms =over 4 =item AIX =over 4 =item * Removed F<libbsd> for AIX 5L and 6.1. Only C<flock()> was used from F<libbsd>. =item * Removed F<libgdbm> for AIX 5L and 6.1 if F<libgdbm> < 1.8.3-5 is installed. The F<libgdbm> is delivered as an optional package with the AIX Toolbox. Unfortunately the versions below 1.8.3-5 are broken. =item * Hints changes mean that AIX 4.2 should work again. =back =item Cygwin =over 4 =item * Perl now supports IPv6 on Cygwin 1.7 and newer. =item * On Cygwin we now strip the last number from the DLL. This has been the behaviour in the cygwin.com build for years. The hints files have been updated. =back =item Darwin (Mac OS X) =over 4 =item * Skip testing the be_BY.CP1131 locale on Darwin 10 (Mac OS X 10.6), as it's still buggy. =item * Correct infelicities in the regexp used to identify buggy locales on Darwin 8 and 9 (Mac OS X 10.4 and 10.5, respectively). =back =item DragonFly BSD =over 4 =item * Fix thread library selection [perl #69686] =back =item FreeBSD =over 4 =item * The hints files now identify the correct threading libraries on FreeBSD 7 and later. =back =item Irix =over 4 =item * We now work around a bizarre preprocessor bug in the Irix 6.5 compiler: C<cc -E -> unfortunately goes into K&R mode, but C<cc -E file.c> doesn't. =back =item NetBSD =over 4 =item * Hints now supports versions 5.*. =back =item OpenVMS =over 4 =item * C<-UDEBUGGING> is now the default on VMS. Like it has been everywhere else for ages and ages. Also make command-line selection of -UDEBUGGING and -DDEBUGGING work in configure.com; before the only way to turn it off was by saying no in answer to the interactive question. =item * The default pipe buffer size on VMS has been updated to 8192 on 64-bit systems. =item * Reads from the in-memory temporary files of C<PerlIO::scalar> used to fail if C<$/> was set to a numeric reference (to indicate record-style reads). This is now fixed. =item * VMS now supports C<getgrgid>. =item * Many improvements and cleanups have been made to the VMS file name handling and conversion code. =item * Enabling the C<PERL_VMS_POSIX_EXIT> logical name now encodes a POSIX exit status in a VMS condition value for better interaction with GNV's bash shell and other utilities that depend on POSIX exit values. See L<perlvms/"$?"> for details. =item * C<File::Copy> now detects Unix compatibility mode on VMS. =back =item Stratus VOS =over 4 =item * Various changes from Stratus have been merged in. =back =item Symbian =over 4 =item * There is now support for Symbian S60 3.2 SDK and S60 5.0 SDK. =back =item Windows =over 4 =item * Perl 5.12 supports Windows 2000 and later. The supporting code for legacy versions of Windows is still included, but will be removed during the next development cycle. =item * Initial support for building Perl with MinGW-w64 is now available. =item * F<perl.exe> now includes a manifest resource to specify the C<trustInfo> settings for Windows Vista and later. Without this setting Windows would treat F<perl.exe> as a legacy application and apply various heuristics like redirecting access to protected file system areas (like the "Program Files" folder) to the users "VirtualStore" instead of generating a proper "permission denied" error. The manifest resource also requests the Microsoft Common-Controls version 6.0 (themed controls introduced in Windows XP). Check out the Win32::VisualStyles module on CPAN to switch back to old style unthemed controls for legacy applications. =item * The C<-t> filetest operator now only returns true if the filehandle is connected to a console window. In previous versions of Perl it would return true for all character mode devices, including F<NUL> and F<LPT1>. =item * The C<-p> filetest operator now works correctly, and the Fcntl::S_IFIFO constant is defined when Perl is compiled with Microsoft Visual C. In previous Perl versions C<-p> always returned a false value, and the Fcntl::S_IFIFO constant was not defined. This bug is specific to Microsoft Visual C and never affected Perl binaries built with MinGW. =item * The socket error codes are now more widely supported: The POSIX module will define the symbolic names, like POSIX::EWOULDBLOCK, and stringification of socket error codes in $! works as well now; C:\>perl -MPOSIX -E "$!=POSIX::EWOULDBLOCK; say $!" A non-blocking socket operation could not be completed immediately. =item * flock() will now set sensible error codes in $!. Previous Perl versions copied the value of $^E into $!, which caused much confusion. =item * select() now supports all empty C<fd_set>s more correctly. =item * C<'.\foo'> and C<'..\foo'> were treated differently than C<'./foo'> and C<'../foo'> by C<do> and C<require> [RT #63492]. =item * Improved message window handling means that C<alarm> and C<kill> messages will no longer be dropped under race conditions. =item * Various bits of Perl's build infrastructure are no longer converted to win32 line endings at release time. If this hurts you, please report the problem with the L<perlbug> program included with perl. =back =back =head1 Known Problems This is a list of some significant unfixed bugs, which are regressions from either 5.10.x or 5.8.x. =over 4 =item * Some CPANPLUS tests may fail if there is a functioning file F<../../cpanp-run-perl> outside your build directory. The failure shouldn't imply there's a problem with the actual functional software. The bug is already fixed in [RT #74188] and is scheduled for inclusion in perl-v5.12.1. =item * C<List::Util::first> misbehaves in the presence of a lexical C<$_> (typically introduced by C<my $_> or implicitly by C<given>). The variable which gets set for each iteration is the package variable C<$_>, not the lexical C<$_> [RT #67694]. A similar issue may occur in other modules that provide functions which take a block as their first argument, like foo { ... $_ ...} list =item * Some regexes may run much more slowly when run in a child thread compared with the thread the pattern was compiled into [RT #55600]. =item * Things like C<"\N{LATIN SMALL LIGATURE FF}" =~ /\N{LATIN SMALL LETTER F}+/> will appear to hang as they get into a very long running loop [RT #72998]. =item * Several porters have reported mysterious crashes when Perl's entire test suite is run after a build on certain Windows 2000 systems. When run by hand, the individual tests reportedly work fine. =back =head1 Errata =over =item * This one is actually a change introduced in 5.10.0, but it was missed from that release's perldelta, so it is mentioned here instead. A bugfix related to the handling of the C</m> modifier and C<qr> resulted in a change of behaviour between 5.8.x and 5.10.0: # matches in 5.8.x, doesn't match in 5.10.0 $re = qr/^bar/; "foo\nbar" =~ /$re/m; =back =head1 Acknowledgements Perl 5.12.0 represents approximately two years of development since Perl 5.10.0 and contains over 750,000 lines of changes across over 3,000 files from over 200 authors and committers. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.12.0: Aaron Crane, Abe Timmerman, Abhijit Menon-Sen, Abigail, Adam Russell, Adriano Ferreira, Ævar Arnfjörð Bjarmason, Alan Grover, Alexandr Ciornii, Alex Davies, Alex Vandiver, Andreas Koenig, Andrew Rodland, andrew@sundale.net, Andy Armstrong, Andy Dougherty, Jose AUGUSTE-ETIENNE, Benjamin Smith, Ben Morrow, bharanee rathna, Bo Borgerson, Bo Lindbergh, Brad Gilbert, Bram, Brendan O'Dea, brian d foy, Charles Bailey, Chip Salzenberg, Chris 'BinGOs' Williams, Christoph Lamprecht, Chris Williams, chromatic, Claes Jakobsson, Craig A. Berry, Dan Dascalescu, Daniel Frederick Crisman, Daniel M. Quinlan, Dan Jacobson, Dan Kogai, Dave Mitchell, Dave Rolsky, David Cantrell, David Dick, David Golden, David Mitchell, David M. Syzdek, David Nicol, David Wheeler, Dennis Kaarsemaker, Dintelmann, Peter, Dominic Dunlop, Dr.Ruud, Duke Leto, Enrico Sorcinelli, Eric Brine, Father Chrysostomos, Florian Ragwitz, Frank Wiegand, Gabor Szabo, Gene Sullivan, Geoffrey T. Dairiki, George Greer, Gerard Goossen, Gisle Aas, Goro Fuji, Graham Barr, Green, Paul, Hans Dieter Pearcey, Harmen, H. Merijn Brand, Hugo van der Sanden, Ian Goodacre, Igor Sutton, Ingo Weinhold, James Bence, James Mastros, Jan Dubois, Jari Aalto, Jarkko Hietaniemi, Jay Hannah, Jerry Hedden, Jesse Vincent, Jim Cromie, Jody Belka, John E. Malmberg, John Malmberg, John Peacock, John Peacock via RT, John P. Linderman, John Wright, Josh ben Jore, Jos I. Boumans, Karl Williamson, Kenichi Ishigaki, Ken Williams, Kevin Brintnall, Kevin Ryde, Kurt Starsinic, Leon Brocard, Lubomir Rintel, Luke Ross, Marcel Grünauer, Marcus Holland-Moritz, Mark Jason Dominus, Marko Asplund, Martin Hasch, Mashrab Kuvatov, Matt Kraai, Matt S Trout, Max Maischein, Michael Breen, Michael Cartmell, Michael G Schwern, Michael Witten, Mike Giroux, Milosz Tanski, Moritz Lenz, Nicholas Clark, Nick Cleaton, Niko Tyni, Offer Kaye, Osvaldo Villalon, Paul Fenwick, Paul Gaborit, Paul Green, Paul Johnson, Paul Marquess, Philip Hazel, Philippe Bruhat, Rafael Garcia-Suarez, Rainer Tammer, Rajesh Mandalemula, Reini Urban, Renée Bäcker, Ricardo Signes, Ricardo SIGNES, Richard Foley, Rich Rauenzahn, Rick Delaney, Risto Kankkunen, Robert May, Roberto C. Sanchez, Robin Barker, SADAHIRO Tomoyuki, Salvador Ortiz Garcia, Sam Vilain, Scott Lanning, Sébastien Aperghis-Tramoni, Sérgio Durigan Júnior, Shlomi Fish, Simon 'corecode' Schubert, Sisyphus, Slaven Rezic, Smylers, Steffen Müller, Steffen Ullrich, Stepan Kasal, Steve Hay, Steven Schubiger, Steve Peters, Tels, The Doctor, Tim Bunce, Tim Jenness, Todd Rinaldo, Tom Christiansen, Tom Hukins, Tom Wyant, Tony Cook, Torsten Schoenfeld, Tye McQueen, Vadim Konovalov, Vincent Pit, Hio YAMASHINA, Yasuhiro Matsumoto, Yitzchak Scott-Thoennes, Yuval Kogman, Yves Orton, Zefram, Zsban Ambrus This is woefully incomplete as it's automatically generated from version control history. In particular, it doesn't include the names of the (very much appreciated) contributors who reported issues in previous versions of Perl that helped make Perl 5.12.0 better. For a more complete list of all of Perl's historical contributors, please see the C<AUTHORS> file in the Perl 5.12.0 distribution. Our "retired" pumpkings Nicholas Clark and Rafael Garcia-Suarez deserve special thanks for their brilliant and substantive ongoing contributions. Nicholas personally authored over 30% of the patches since 5.10.0. Rafael comes in second in patch authorship with 11%, but is first by a long shot in committing patches authored by others, pushing 44% of the commits since 5.10.0 in this category, often after providing considerable coaching to the patch authors. These statistics in no way comprise all of their contributions, but express in shorthand that we couldn't have done it without them. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at L<http://rt.perl.org/perlbug/>. There may also be information at L<http://www.perl.org/>, the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analyzed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. L<http://dev.perl.org/perl5/errata.html> for a list of issues found after this release, as well as a list of CPAN modules known to be incompatible with this release. =cut perllinux.pod 0000644 00000003727 15125556335 0007315 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specifically designed to be readable as is. =head1 NAME perllinux - Perl version 5 on Linux systems =head1 DESCRIPTION This document describes various features of Linux that will affect how Perl version 5 (hereafter just Perl) is compiled and/or runs. =head2 Deploying Perl on Linux Normally one can install F</usr/bin/perl> on Linux using your distribution's package manager (e.g: C<sudo apt-get install perl>, or C<sudo dnf install perl>). Note that sometimes one needs to install some extra system packages in order to be able to use CPAN frontends, and that messing with the system's perl is not always recommended. One can use L<perlbrew|https://perlbrew.pl/> to avoid such issues. Otherwise, perl should build fine on Linux using the mainstream compilers GCC and clang, while following the usual instructions. =head2 Experimental Support for Sun Studio Compilers for Linux OS Sun Microsystems has released a port of their Sun Studio compilers for Linux. As of May 2019, the last stable release took place on 2017, and one can buy support contracts for them. There are some special instructions for building Perl with Sun Studio on Linux. Following the normal C<Configure>, you have to run make as follows: LDLOADLIBS=-lc make C<LDLOADLIBS> is an environment variable used by the linker to link C</ext> modules to glibc. Currently, that environment variable is not getting populated by a combination of C<Config> entries and C<ExtUtil::MakeMaker>. While there may be a bug somewhere in Perl's configuration or C<ExtUtil::MakeMaker> causing the problem, the most likely cause is an incomplete understanding of Sun Studio by this author. Further investigation is needed to get this working better. =head1 AUTHOR Steve Peters <steve@fisharerojo.org> Please report any errors, updates, or suggestions to L<https://github.com/Perl/perl5/issues>. perlunifaq.pod 0000644 00000032514 15125556335 0007435 0 ustar 00 =head1 NAME perlunifaq - Perl Unicode FAQ =head1 Q and A This is a list of questions and answers about Unicode in Perl, intended to be read after L<perlunitut>. =head2 perlunitut isn't really a Unicode tutorial, is it? No, and this isn't really a Unicode FAQ. Perl has an abstracted interface for all supported character encodings, so this is actually a generic C<Encode> tutorial and C<Encode> FAQ. But many people think that Unicode is special and magical, and I didn't want to disappoint them, so I decided to call the document a Unicode tutorial. =head2 What character encodings does Perl support? To find out which character encodings your Perl supports, run: perl -MEncode -le "print for Encode->encodings(':all')" =head2 Which version of perl should I use? Well, if you can, upgrade to the most recent, but certainly C<5.8.1> or newer. The tutorial and FAQ assume the latest release. You should also check your modules, and upgrade them if necessary. For example, HTML::Entities requires version >= 1.32 to function correctly, even though the changelog is silent about this. =head2 What about binary data, like images? Well, apart from a bare C<binmode $fh>, you shouldn't treat them specially. (The binmode is needed because otherwise Perl may convert line endings on Win32 systems.) Be careful, though, to never combine text strings with binary strings. If you need text in a binary stream, encode your text strings first using the appropriate encoding, then join them with binary strings. See also: "What if I don't encode?". =head2 When should I decode or encode? Whenever you're communicating text with anything that is external to your perl process, like a database, a text file, a socket, or another program. Even if the thing you're communicating with is also written in Perl. =head2 What if I don't decode? Whenever your encoded, binary string is used together with a text string, Perl will assume that your binary string was encoded with ISO-8859-1, also known as latin-1. If it wasn't latin-1, then your data is unpleasantly converted. For example, if it was UTF-8, the individual bytes of multibyte characters are seen as separate characters, and then again converted to UTF-8. Such double encoding can be compared to double HTML encoding (C<&gt;>), or double URI encoding (C<%253E>). This silent implicit decoding is known as "upgrading". That may sound positive, but it's best to avoid it. =head2 What if I don't encode? Your text string will be sent using the bytes in Perl's internal format. In some cases, Perl will warn you that you're doing something wrong, with a friendly warning: Wide character in print at example.pl line 2. Because the internal format is often UTF-8, these bugs are hard to spot, because UTF-8 is usually the encoding you wanted! But don't be lazy, and don't use the fact that Perl's internal format is UTF-8 to your advantage. Encode explicitly to avoid weird bugs, and to show to maintenance programmers that you thought this through. =head2 Is there a way to automatically decode or encode? If all data that comes from a certain handle is encoded in exactly the same way, you can tell the PerlIO system to automatically decode everything, with the C<encoding> layer. If you do this, you can't accidentally forget to decode or encode anymore, on things that use the layered handle. You can provide this layer when C<open>ing the file: open my $fh, '>:encoding(UTF-8)', $filename; # auto encoding on write open my $fh, '<:encoding(UTF-8)', $filename; # auto decoding on read Or if you already have an open filehandle: binmode $fh, ':encoding(UTF-8)'; Some database drivers for DBI can also automatically encode and decode, but that is sometimes limited to the UTF-8 encoding. =head2 What if I don't know which encoding was used? Do whatever you can to find out, and if you have to: guess. (Don't forget to document your guess with a comment.) You could open the document in a web browser, and change the character set or character encoding until you can visually confirm that all characters look the way they should. There is no way to reliably detect the encoding automatically, so if people keep sending you data without charset indication, you may have to educate them. =head2 Can I use Unicode in my Perl sources? Yes, you can! If your sources are UTF-8 encoded, you can indicate that with the C<use utf8> pragma. use utf8; This doesn't do anything to your input, or to your output. It only influences the way your sources are read. You can use Unicode in string literals, in identifiers (but they still have to be "word characters" according to C<\w>), and even in custom delimiters. =head2 Data::Dumper doesn't restore the UTF8 flag; is it broken? No, Data::Dumper's Unicode abilities are as they should be. There have been some complaints that it should restore the UTF8 flag when the data is read again with C<eval>. However, you should really not look at the flag, and nothing indicates that Data::Dumper should break this rule. Here's what happens: when Perl reads in a string literal, it sticks to 8 bit encoding as long as it can. (But perhaps originally it was internally encoded as UTF-8, when you dumped it.) When it has to give that up because other characters are added to the text string, it silently upgrades the string to UTF-8. If you properly encode your strings for output, none of this is of your concern, and you can just C<eval> dumped data as always. =head2 Why do regex character classes sometimes match only in the ASCII range? Starting in Perl 5.14 (and partially in Perl 5.12), just put a C<use feature 'unicode_strings'> near the beginning of your program. Within its lexical scope you shouldn't have this problem. It also is automatically enabled under C<use feature ':5.12'> or C<use v5.12> or using C<-E> on the command line for Perl 5.12 or higher. The rationale for requiring this is to not break older programs that rely on the way things worked before Unicode came along. Those older programs knew only about the ASCII character set, and so may not work properly for additional characters. When a string is encoded in UTF-8, Perl assumes that the program is prepared to deal with Unicode, but when the string isn't, Perl assumes that only ASCII is wanted, and so those characters that are not ASCII characters aren't recognized as to what they would be in Unicode. C<use feature 'unicode_strings'> tells Perl to treat all characters as Unicode, whether the string is encoded in UTF-8 or not, thus avoiding the problem. However, on earlier Perls, or if you pass strings to subroutines outside the feature's scope, you can force Unicode rules by changing the encoding to UTF-8 by doing C<utf8::upgrade($string)>. This can be used safely on any string, as it checks and does not change strings that have already been upgraded. For a more detailed discussion, see L<Unicode::Semantics> on CPAN. =head2 Why do some characters not uppercase or lowercase correctly? See the answer to the previous question. =head2 How can I determine if a string is a text string or a binary string? You can't. Some use the UTF8 flag for this, but that's misuse, and makes well behaved modules like Data::Dumper look bad. The flag is useless for this purpose, because it's off when an 8 bit encoding (by default ISO-8859-1) is used to store the string. This is something you, the programmer, has to keep track of; sorry. You could consider adopting a kind of "Hungarian notation" to help with this. =head2 How do I convert from encoding FOO to encoding BAR? By first converting the FOO-encoded byte string to a text string, and then the text string to a BAR-encoded byte string: my $text_string = decode('FOO', $foo_string); my $bar_string = encode('BAR', $text_string); or by skipping the text string part, and going directly from one binary encoding to the other: use Encode qw(from_to); from_to($string, 'FOO', 'BAR'); # changes contents of $string or by letting automatic decoding and encoding do all the work: open my $foofh, '<:encoding(FOO)', 'example.foo.txt'; open my $barfh, '>:encoding(BAR)', 'example.bar.txt'; print { $barfh } $_ while <$foofh>; =head2 What are C<decode_utf8> and C<encode_utf8>? These are alternate syntaxes for C<decode('utf8', ...)> and C<encode('utf8', ...)>. Do not use these functions for data exchange. Instead use C<decode('UTF-8', ...)> and C<encode('UTF-8', ...)>; see L</What's the difference between UTF-8 and utf8?> below. =head2 What is a "wide character"? This is a term used for characters occupying more than one byte. The Perl warning "Wide character in ..." is caused by such a character. With no specified encoding layer, Perl tries to fit things into a single byte. When it can't, it emits this warning (if warnings are enabled), and uses UTF-8 encoded data instead. To avoid this warning and to avoid having different output encodings in a single stream, always specify an encoding explicitly, for example with a PerlIO layer: binmode STDOUT, ":encoding(UTF-8)"; =head1 INTERNALS =head2 What is "the UTF8 flag"? Please, unless you're hacking the internals, or debugging weirdness, don't think about the UTF8 flag at all. That means that you very probably shouldn't use C<is_utf8>, C<_utf8_on> or C<_utf8_off> at all. The UTF8 flag, also called SvUTF8, is an internal flag that indicates that the current internal representation is UTF-8. Without the flag, it is assumed to be ISO-8859-1. Perl converts between these automatically. (Actually Perl usually assumes the representation is ASCII; see L</Why do regex character classes sometimes match only in the ASCII range?> above.) One of Perl's internal formats happens to be UTF-8. Unfortunately, Perl can't keep a secret, so everyone knows about this. That is the source of much confusion. It's better to pretend that the internal format is some unknown encoding, and that you always have to encode and decode explicitly. =head2 What about the C<use bytes> pragma? Don't use it. It makes no sense to deal with bytes in a text string, and it makes no sense to deal with characters in a byte string. Do the proper conversions (by decoding/encoding), and things will work out well: you get character counts for decoded data, and byte counts for encoded data. C<use bytes> is usually a failed attempt to do something useful. Just forget about it. =head2 What about the C<use encoding> pragma? Don't use it. Unfortunately, it assumes that the programmer's environment and that of the user will use the same encoding. It will use the same encoding for the source code and for STDIN and STDOUT. When a program is copied to another machine, the source code does not change, but the STDIO environment might. If you need non-ASCII characters in your source code, make it a UTF-8 encoded file and C<use utf8>. If you need to set the encoding for STDIN, STDOUT, and STDERR, for example based on the user's locale, C<use open>. =head2 What is the difference between C<:encoding> and C<:utf8>? Because UTF-8 is one of Perl's internal formats, you can often just skip the encoding or decoding step, and manipulate the UTF8 flag directly. Instead of C<:encoding(UTF-8)>, you can simply use C<:utf8>, which skips the encoding step if the data was already represented as UTF8 internally. This is widely accepted as good behavior when you're writing, but it can be dangerous when reading, because it causes internal inconsistency when you have invalid byte sequences. Using C<:utf8> for input can sometimes result in security breaches, so please use C<:encoding(UTF-8)> instead. Instead of C<decode> and C<encode>, you could use C<_utf8_on> and C<_utf8_off>, but this is considered bad style. Especially C<_utf8_on> can be dangerous, for the same reason that C<:utf8> can. There are some shortcuts for oneliners; see L<-C in perlrun|perlrun/-C [numberE<sol>list]>. =head2 What's the difference between C<UTF-8> and C<utf8>? C<UTF-8> is the official standard. C<utf8> is Perl's way of being liberal in what it accepts. If you have to communicate with things that aren't so liberal, you may want to consider using C<UTF-8>. If you have to communicate with things that are too liberal, you may have to use C<utf8>. The full explanation is in L<Encode/"UTF-8 vs. utf8 vs. UTF8">. C<UTF-8> is internally known as C<utf-8-strict>. The tutorial uses UTF-8 consistently, even where utf8 is actually used internally, because the distinction can be hard to make, and is mostly irrelevant. For example, utf8 can be used for code points that don't exist in Unicode, like 9999999, but if you encode that to UTF-8, you get a substitution character (by default; see L<Encode/"Handling Malformed Data"> for more ways of dealing with this.) Okay, if you insist: the "internal format" is utf8, not UTF-8. (When it's not some other encoding.) =head2 I lost track; what encoding is the internal format really? It's good that you lost track, because you shouldn't depend on the internal format being any specific encoding. But since you asked: by default, the internal format is either ISO-8859-1 (latin-1), or utf8, depending on the history of the string. On EBCDIC platforms, this may be different even. Perl knows how it stored the string internally, and will use that knowledge when you C<encode>. In other words: don't try to find out what the internal encoding for a certain string is, but instead just encode it into the encoding that you want. =head1 AUTHOR Juerd Waalboer <#####@juerd.nl> =head1 SEE ALSO L<perlunicode>, L<perluniintro>, L<Encode> perl5182delta.pod 0000644 00000012327 15125556335 0007563 0 ustar 00 =encoding utf8 =head1 NAME perl5182delta - what is new for perl v5.18.2 =head1 DESCRIPTION This document describes differences between the 5.18.1 release and the 5.18.2 release. If you are upgrading from an earlier release such as 5.18.0, first read L<perl5181delta>, which describes differences between 5.18.0 and 5.18.1. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<B> has been upgraded from version 1.42_01 to 1.42_02. The fix for [perl #118525] introduced a regression in the behaviour of C<B::CV::GV>, changing the return value from a C<B::SPECIAL> object on a C<NULL> C<CvGV> to C<undef>. C<B::CV::GV> again returns a C<B::SPECIAL> object in this case. [perl #119413] =item * L<B::Concise> has been upgraded from version 0.95 to 0.95_01. This fixes a bug in dumping unexpected SPECIALs. =item * L<English> has been upgraded from version 1.06 to 1.06_01. This fixes an error about the performance of C<$`>, C<$&>, and C<$'>. =item * L<File::Glob> has been upgraded from version 1.20 to 1.20_01. =back =head1 Documentation =head2 Changes to Existing Documentation =over 4 =item * L<perlrepository> has been restored with a pointer to more useful pages. =item * L<perlhack> has been updated with the latest changes from blead. =back =head1 Selected Bug Fixes =over 4 =item * Perl 5.18.1 introduced a regression along with a bugfix for lexical subs. Some B::SPECIAL results from B::CV::GV became undefs instead. This broke Devel::Cover among other libraries. This has been fixed. [perl #119351] =item * Perl 5.18.0 introduced a regression whereby C<[:^ascii:]>, if used in the same character class as other qualifiers, would fail to match characters in the Latin-1 block. This has been fixed. [perl #120799] =item * Perl 5.18.0 introduced a regression when using ->SUPER::method with AUTOLOAD by looking up AUTOLOAD from the current package, rather than the current package’s superclass. This has been fixed. [perl #120694] =item * Perl 5.18.0 introduced a regression whereby C<-bareword> was no longer permitted under the C<strict> and C<integer> pragmata when used together. This has been fixed. [perl #120288] =item * Previously PerlIOBase_dup didn't check if pushing the new layer succeeded before (optionally) setting the utf8 flag. This could cause segfaults-by-nullpointer. This has been fixed. =item * A buffer overflow with very long identifiers has been fixed. =item * A regression from 5.16 in the handling of padranges led to assertion failures if a keyword plugin declined to handle the second ‘my’, but only after creating a padop. This affected, at least, Devel::CallParser under threaded builds. This has been fixed. =item * The construct C<< $r=qr/.../; /$r/p >> is now handled properly, an issue which had been worsened by changes 5.18.0. [perl #118213] =back =head1 Acknowledgements Perl 5.18.2 represents approximately 3 months of development since Perl 5.18.1 and contains approximately 980 lines of changes across 39 files from 4 authors. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.18.2: Craig A. Berry, David Mitchell, Ricardo Signes, Tony Cook. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl5123delta.pod 0000644 00000010004 15125556335 0007544 0 ustar 00 =encoding utf8 =head1 NAME perl5123delta - what is new for perl v5.12.3 =head1 DESCRIPTION This document describes differences between the 5.12.2 release and the 5.12.3 release. If you are upgrading from an earlier release such as 5.12.1, first read L<perl5122delta>, which describes differences between 5.12.1 and 5.12.2. The major changes made in 5.12.0 are described in L<perl5120delta>. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.12.2. If any exist, they are bugs and reports are welcome. =head1 Core Enhancements =head2 C<keys>, C<values> work on arrays You can now use the C<keys>, C<values>, C<each> builtin functions on arrays (previously you could only use them on hashes). See L<perlfunc> for details. This is actually a change introduced in perl 5.12.0, but it was missed from that release's perldelta. =head1 Bug Fixes "no VERSION" will now correctly deparse with B::Deparse, as will certain constant expressions. Module::Build should be more reliably pass its tests under cygwin. Lvalue subroutines are again able to return copy-on-write scalars. This had been broken since version 5.10.0. =head1 Platform Specific Notes =over 4 =item Solaris A separate DTrace is now build for miniperl, which means that perl can be compiled with -Dusedtrace on Solaris again. =item VMS A number of regressions on VMS have been fixed. In addition to minor cleanup of questionable expressions in F<vms.c>, file permissions should no longer be garbled by the PerlIO layer, and spurious record boundaries should no longer be introduced by the PerlIO layer during output. For more details and discussion on the latter, see: http://www.nntp.perl.org/group/perl.vmsperl/2010/11/msg15419.html =item VOS A few very small changes were made to the build process on VOS to better support the platform. Longer-than-32-character filenames are now supported on OpenVOS, and build properly without IPv6 support. =back =head1 Acknowledgements Perl 5.12.3 represents approximately four months of development since Perl 5.12.2 and contains approximately 2500 lines of changes across 54 files from 16 authors. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.12.3: Craig A. Berry, David Golden, David Leadbeater, Father Chrysostomos, Florian Ragwitz, Jesse Vincent, Karl Williamson, Nick Johnston, Nicolas Kaiser, Paul Green, Rafael Garcia-Suarez, Rainer Tammer, Ricardo Signes, Steffen Mueller, Zsbán Ambrus, Ævar Arnfjörð Bjarmason =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlpragma.pod 0000644 00000012070 15125556335 0007414 0 ustar 00 =head1 NAME perlpragma - how to write a user pragma =head1 DESCRIPTION A pragma is a module which influences some aspect of the compile time or run time behaviour of Perl, such as C<strict> or C<warnings>. With Perl 5.10 you are no longer limited to the built in pragmata; you can now create user pragmata that modify the behaviour of user functions within a lexical scope. =head1 A basic example For example, say you need to create a class implementing overloaded mathematical operators, and would like to provide your own pragma that functions much like C<use integer;> You'd like this code use MyMaths; my $l = MyMaths->new(1.2); my $r = MyMaths->new(3.4); print "A: ", $l + $r, "\n"; use myint; print "B: ", $l + $r, "\n"; { no myint; print "C: ", $l + $r, "\n"; } print "D: ", $l + $r, "\n"; no myint; print "E: ", $l + $r, "\n"; to give the output A: 4.6 B: 4 C: 4.6 D: 4 E: 4.6 I<i.e.>, where C<use myint;> is in effect, addition operations are forced to integer, whereas by default they are not, with the default behaviour being restored via C<no myint;> The minimal implementation of the package C<MyMaths> would be something like this: package MyMaths; use warnings; use strict; use myint(); use overload '+' => sub { my ($l, $r) = @_; # Pass 1 to check up one call level from here if (myint::in_effect(1)) { int($$l) + int($$r); } else { $$l + $$r; } }; sub new { my ($class, $value) = @_; bless \$value, $class; } 1; Note how we load the user pragma C<myint> with an empty list C<()> to prevent its C<import> being called. The interaction with the Perl compilation happens inside package C<myint>: package myint; use strict; use warnings; sub import { $^H{"myint/in_effect"} = 1; } sub unimport { $^H{"myint/in_effect"} = 0; } sub in_effect { my $level = shift // 0; my $hinthash = (caller($level))[10]; return $hinthash->{"myint/in_effect"}; } 1; As pragmata are implemented as modules, like any other module, C<use myint;> becomes BEGIN { require myint; myint->import(); } and C<no myint;> is BEGIN { require myint; myint->unimport(); } Hence the C<import> and C<unimport> routines are called at B<compile time> for the user's code. User pragmata store their state by writing to the magical hash C<%^H>, hence these two routines manipulate it. The state information in C<%^H> is stored in the optree, and can be retrieved read-only at runtime with C<caller()>, at index 10 of the list of returned results. In the example pragma, retrieval is encapsulated into the routine C<in_effect()>, which takes as parameter the number of call frames to go up to find the value of the pragma in the user's script. This uses C<caller()> to determine the value of C<$^H{"myint/in_effect"}> when each line of the user's script was called, and therefore provide the correct semantics in the subroutine implementing the overloaded addition. =head1 Key naming There is only a single C<%^H>, but arbitrarily many modules that want to use its scoping semantics. To avoid stepping on each other's toes, they need to be sure to use different keys in the hash. It is therefore conventional for a module to use only keys that begin with the module's name (the name of its main package) and a "/" character. After this module-identifying prefix, the rest of the key is entirely up to the module: it may include any characters whatsoever. For example, a module C<Foo::Bar> should use keys such as C<Foo::Bar/baz> and C<Foo::Bar/$%/_!>. Modules following this convention all play nicely with each other. The Perl core uses a handful of keys in C<%^H> which do not follow this convention, because they predate it. Keys that follow the convention won't conflict with the core's historical keys. =head1 Implementation details The optree is shared between threads. This means there is a possibility that the optree will outlive the particular thread (and therefore the interpreter instance) that created it, so true Perl scalars cannot be stored in the optree. Instead a compact form is used, which can only store values that are integers (signed and unsigned), strings or C<undef> - references and floating point values are stringified. If you need to store multiple values or complex structures, you should serialise them, for example with C<pack>. The deletion of a hash key from C<%^H> is recorded, and as ever can be distinguished from the existence of a key with value C<undef> with C<exists>. B<Don't> attempt to store references to data structures as integers which are retrieved via C<caller> and converted back, as this will not be threadsafe. Accesses would be to the structure without locking (which is not safe for Perl's scalars), and either the structure has to leak, or it has to be freed when its creating thread terminates, which may be before the optree referencing it is deleted, if other threads outlive it. perllocale.pod 0000644 00000220600 15125556335 0007404 0 ustar 00 =encoding utf8 =head1 NAME perllocale - Perl locale handling (internationalization and localization) =head1 DESCRIPTION In the beginning there was ASCII, the "American Standard Code for Information Interchange", which works quite well for Americans with their English alphabet and dollar-denominated currency. But it doesn't work so well even for other English speakers, who may use different currencies, such as the pound sterling (as the symbol for that currency is not in ASCII); and it's hopelessly inadequate for many of the thousands of the world's other languages. To address these deficiencies, the concept of locales was invented (formally the ISO C, XPG4, POSIX 1.c "locale system"). And applications were and are being written that use the locale mechanism. The process of making such an application take account of its users' preferences in these kinds of matters is called B<internationalization> (often abbreviated as B<i18n>); telling such an application about a particular set of preferences is known as B<localization> (B<l10n>). Perl has been extended to support certain types of locales available in the locale system. This is controlled per application by using one pragma, one function call, and several environment variables. Perl supports single-byte locales that are supersets of ASCII, such as the ISO 8859 ones, and one multi-byte-type locale, UTF-8 ones, described in the next paragraph. Perl doesn't support any other multi-byte locales, such as the ones for East Asian languages. Unfortunately, there are quite a few deficiencies with the design (and often, the implementations) of locales. Unicode was invented (see L<perlunitut> for an introduction to that) in part to address these design deficiencies, and nowadays, there is a series of "UTF-8 locales", based on Unicode. These are locales whose character set is Unicode, encoded in UTF-8. Starting in v5.20, Perl fully supports UTF-8 locales, except for sorting and string comparisons like C<lt> and C<ge>. Starting in v5.26, Perl can handle these reasonably as well, depending on the platform's implementation. However, for earlier releases or for better control, use L<Unicode::Collate>. There are actually two slightly different types of UTF-8 locales: one for Turkic languages and one for everything else. Starting in Perl v5.30, Perl detects Turkic locales by their behaviour, and seamlessly handles both types; previously only the non-Turkic one was supported. The name of the locale is ignored, if your system has a C<tr_TR.UTF-8> locale and it doesn't behave like a Turkic locale, perl will treat it like a non-Turkic locale. Perl continues to support the old non UTF-8 locales as well. There are currently no UTF-8 locales for EBCDIC platforms. (Unicode is also creating C<CLDR>, the "Common Locale Data Repository", L<http://cldr.unicode.org/> which includes more types of information than are available in the POSIX locale system. At the time of this writing, there was no CPAN module that provides access to this XML-encoded data. However, it is possible to compute the POSIX locale data from them, and earlier CLDR versions had these already extracted for you as UTF-8 locales L<http://unicode.org/Public/cldr/2.0.1/>.) =head1 WHAT IS A LOCALE A locale is a set of data that describes various aspects of how various communities in the world categorize their world. These categories are broken down into the following types (some of which include a brief note here): =over =item Category C<LC_NUMERIC>: Numeric formatting This indicates how numbers should be formatted for human readability, for example the character used as the decimal point. =item Category C<LC_MONETARY>: Formatting of monetary amounts Z<> =item Category C<LC_TIME>: Date/Time formatting Z<> =item Category C<LC_MESSAGES>: Error and other messages This is used by Perl itself only for accessing operating system error messages via L<$!|perlvar/$ERRNO> and L<$^E|perlvar/$EXTENDED_OS_ERROR>. =item Category C<LC_COLLATE>: Collation This indicates the ordering of letters for comparison and sorting. In Latin alphabets, for example, "b", generally follows "a". =item Category C<LC_CTYPE>: Character Types This indicates, for example if a character is an uppercase letter. =item Other categories Some platforms have other categories, dealing with such things as measurement units and paper sizes. None of these are used directly by Perl, but outside operations that Perl interacts with may use these. See L</Not within the scope of "use locale"> below. =back More details on the categories used by Perl are given below in L</LOCALE CATEGORIES>. Together, these categories go a long way towards being able to customize a single program to run in many different locations. But there are deficiencies, so keep reading. =head1 PREPARING TO USE LOCALES Perl itself (outside the L<POSIX> module) will not use locales unless specifically requested to (but again note that Perl may interact with code that does use them). Even if there is such a request, B<all> of the following must be true for it to work properly: =over 4 =item * B<Your operating system must support the locale system>. If it does, you should find that the C<setlocale()> function is a documented part of its C library. =item * B<Definitions for locales that you use must be installed>. You, or your system administrator, must make sure that this is the case. The available locales, the location in which they are kept, and the manner in which they are installed all vary from system to system. Some systems provide only a few, hard-wired locales and do not allow more to be added. Others allow you to add "canned" locales provided by the system supplier. Still others allow you or the system administrator to define and add arbitrary locales. (You may have to ask your supplier to provide canned locales that are not delivered with your operating system.) Read your system documentation for further illumination. =item * B<Perl must believe that the locale system is supported>. If it does, C<perl -V:d_setlocale> will say that the value for C<d_setlocale> is C<define>. =back If you want a Perl application to process and present your data according to a particular locale, the application code should include the S<C<use locale>> pragma (see L</The "use locale" pragma>) where appropriate, and B<at least one> of the following must be true: =over 4 =item 1 B<The locale-determining environment variables (see L</"ENVIRONMENT">) must be correctly set up> at the time the application is started, either by yourself or by whomever set up your system account; or =item 2 B<The application must set its own locale> using the method described in L</The setlocale function>. =back =head1 USING LOCALES =head2 The C<"use locale"> pragma Starting in Perl 5.28, this pragma may be used in L<multi-threaded|threads> applications on systems that have thread-safe locale ability. Some caveats apply, see L</Multi-threaded> below. On systems without this capability, or in earlier Perls, do NOT use this pragma in scripts that have multiple L<threads|threads> active. The locale in these cases is not local to a single thread. Another thread may change the locale at any time, which could cause at a minimum that a given thread is operating in a locale it isn't expecting to be in. On some platforms, segfaults can also occur. The locale change need not be explicit; some operations cause perl to change the locale itself. You are vulnerable simply by having done a S<C<"use locale">>. By default, Perl itself (outside the L<POSIX> module) ignores the current locale. The S<C<use locale>> pragma tells Perl to use the current locale for some operations. Starting in v5.16, there are optional parameters to this pragma, described below, which restrict which operations are affected by it. The current locale is set at execution time by L<setlocale()|/The setlocale function> described below. If that function hasn't yet been called in the course of the program's execution, the current locale is that which was determined by the L</"ENVIRONMENT"> in effect at the start of the program. If there is no valid environment, the current locale is whatever the system default has been set to. On POSIX systems, it is likely, but not necessarily, the "C" locale. On Windows, the default is set via the computer's S<C<Control Panel-E<gt>Regional and Language Options>> (or its current equivalent). The operations that are affected by locale are: =over 4 =item B<Not within the scope of C<"use locale">> Only certain operations (all originating outside Perl) should be affected, as follows: =over 4 =item * The current locale is used when going outside of Perl with operations like L<system()|perlfunc/system LIST> or L<qxE<sol>E<sol>|perlop/qxE<sol>STRINGE<sol>>, if those operations are locale-sensitive. =item * Also Perl gives access to various C library functions through the L<POSIX> module. Some of those functions are always affected by the current locale. For example, C<POSIX::strftime()> uses C<LC_TIME>; C<POSIX::strtod()> uses C<LC_NUMERIC>; C<POSIX::strcoll()> and C<POSIX::strxfrm()> use C<LC_COLLATE>. All such functions will behave according to the current underlying locale, even if that locale isn't exposed to Perl space. This applies as well to L<I18N::Langinfo>. =item * XS modules for all categories but C<LC_NUMERIC> get the underlying locale, and hence any C library functions they call will use that underlying locale. For more discussion, see L<perlxs/CAVEATS>. =back Note that all C programs (including the perl interpreter, which is written in C) always have an underlying locale. That locale is the "C" locale unless changed by a call to L<setlocale()|/The setlocale function>. When Perl starts up, it changes the underlying locale to the one which is indicated by the L</ENVIRONMENT>. When using the L<POSIX> module or writing XS code, it is important to keep in mind that the underlying locale may be something other than "C", even if the program hasn't explicitly changed it. Z<> =item B<Lingering effects of C<S<use locale>>> Certain Perl operations that are set-up within the scope of a C<use locale> retain that effect even outside the scope. These include: =over 4 =item * The output format of a L<write()|perlfunc/write> is determined by an earlier format declaration (L<perlfunc/format>), so whether or not the output is affected by locale is determined by if the C<format()> is within the scope of a C<use locale>, not whether the C<write()> is. =item * Regular expression patterns can be compiled using L<qrE<sol>E<sol>|perlop/qrE<sol>STRINGE<sol>msixpodualn> with actual matching deferred to later. Again, it is whether or not the compilation was done within the scope of C<use locale> that determines the match behavior, not if the matches are done within such a scope or not. =back Z<> =item B<Under C<"use locale";>> =over 4 =item * All the above operations =item * B<Format declarations> (L<perlfunc/format>) and hence any subsequent C<write()>s use C<LC_NUMERIC>. =item * B<stringification and output> use C<LC_NUMERIC>. These include the results of C<print()>, C<printf()>, C<say()>, and C<sprintf()>. =item * B<The comparison operators> (C<lt>, C<le>, C<cmp>, C<ge>, and C<gt>) use C<LC_COLLATE>. C<sort()> is also affected if used without an explicit comparison function, because it uses C<cmp> by default. B<Note:> C<eq> and C<ne> are unaffected by locale: they always perform a char-by-char comparison of their scalar operands. What's more, if C<cmp> finds that its operands are equal according to the collation sequence specified by the current locale, it goes on to perform a char-by-char comparison, and only returns I<0> (equal) if the operands are char-for-char identical. If you really want to know whether two strings--which C<eq> and C<cmp> may consider different--are equal as far as collation in the locale is concerned, see the discussion in L</Category C<LC_COLLATE>: Collation>. =item * B<Regular expressions and case-modification functions> (C<uc()>, C<lc()>, C<ucfirst()>, and C<lcfirst()>) use C<LC_CTYPE> =item * B<The variables L<$!|perlvar/$ERRNO>> (and its synonyms C<$ERRNO> and C<$OS_ERROR>) B<and L<$^E|perlvar/$EXTENDED_OS_ERROR>> (and its synonym C<$EXTENDED_OS_ERROR>) when used as strings use C<LC_MESSAGES>. =back =back The default behavior is restored with the S<C<no locale>> pragma, or upon reaching the end of the block enclosing C<use locale>. Note that C<use locale> calls may be nested, and that what is in effect within an inner scope will revert to the outer scope's rules at the end of the inner scope. The string result of any operation that uses locale information is tainted, as it is possible for a locale to be untrustworthy. See L</"SECURITY">. Starting in Perl v5.16 in a very limited way, and more generally in v5.22, you can restrict which category or categories are enabled by this particular instance of the pragma by adding parameters to it. For example, use locale qw(:ctype :numeric); enables locale awareness within its scope of only those operations (listed above) that are affected by C<LC_CTYPE> and C<LC_NUMERIC>. The possible categories are: C<:collate>, C<:ctype>, C<:messages>, C<:monetary>, C<:numeric>, C<:time>, and the pseudo category C<:characters> (described below). Thus you can say use locale ':messages'; and only L<$!|perlvar/$ERRNO> and L<$^E|perlvar/$EXTENDED_OS_ERROR> will be locale aware. Everything else is unaffected. Since Perl doesn't currently do anything with the C<LC_MONETARY> category, specifying C<:monetary> does effectively nothing. Some systems have other categories, such as C<LC_PAPER>, but Perl also doesn't do anything with them, and there is no way to specify them in this pragma's arguments. You can also easily say to use all categories but one, by either, for example, use locale ':!ctype'; use locale ':not_ctype'; both of which mean to enable locale awarness of all categories but C<LC_CTYPE>. Only one category argument may be specified in a S<C<use locale>> if it is of the negated form. Prior to v5.22 only one form of the pragma with arguments is available: use locale ':not_characters'; (and you have to say C<not_>; you can't use the bang C<!> form). This pseudo category is a shorthand for specifying both C<:collate> and C<:ctype>. Hence, in the negated form, it is nearly the same thing as saying use locale qw(:messages :monetary :numeric :time); We use the term "nearly", because C<:not_characters> also turns on S<C<use feature 'unicode_strings'>> within its scope. This form is less useful in v5.20 and later, and is described fully in L</Unicode and UTF-8>, but briefly, it tells Perl to not use the character portions of the locale definition, that is the C<LC_CTYPE> and C<LC_COLLATE> categories. Instead it will use the native character set (extended by Unicode). When using this parameter, you are responsible for getting the external character set translated into the native/Unicode one (which it already will be if it is one of the increasingly popular UTF-8 locales). There are convenient ways of doing this, as described in L</Unicode and UTF-8>. =head2 The setlocale function WARNING! Prior to Perl 5.28 or on a system that does not support thread-safe locale operations, do NOT use this function in a L<thread|threads>. The locale will change in all other threads at the same time, and should your thread get paused by the operating system, and another started, that thread will not have the locale it is expecting. On some platforms, there can be a race leading to segfaults if two threads call this function nearly simultaneously. This warning does not apply on unthreaded builds, or on perls where C<${^SAFE_LOCALES}> exists and is non-zero; namely Perl 5.28 and later unthreaded or compiled to be locale-thread-safe. You can switch locales as often as you wish at run time with the C<POSIX::setlocale()> function: # Import locale-handling tool set from POSIX module. # This example uses: setlocale -- the function call # LC_CTYPE -- explained below # (Showing the testing for success/failure of operations is # omitted in these examples to avoid distracting from the main # point) use POSIX qw(locale_h); use locale; my $old_locale; # query and save the old locale $old_locale = setlocale(LC_CTYPE); setlocale(LC_CTYPE, "fr_CA.ISO8859-1"); # LC_CTYPE now in locale "French, Canada, codeset ISO 8859-1" setlocale(LC_CTYPE, ""); # LC_CTYPE now reset to the default defined by the # LC_ALL/LC_CTYPE/LANG environment variables, or to the system # default. See below for documentation. # restore the old locale setlocale(LC_CTYPE, $old_locale); The first argument of C<setlocale()> gives the B<category>, the second the B<locale>. The category tells in what aspect of data processing you want to apply locale-specific rules. Category names are discussed in L</LOCALE CATEGORIES> and L</"ENVIRONMENT">. The locale is the name of a collection of customization information corresponding to a particular combination of language, country or territory, and codeset. Read on for hints on the naming of locales: not all systems name locales as in the example. If no second argument is provided and the category is something other than C<LC_ALL>, the function returns a string naming the current locale for the category. You can use this value as the second argument in a subsequent call to C<setlocale()>, B<but> on some platforms the string is opaque, not something that most people would be able to decipher as to what locale it means. If no second argument is provided and the category is C<LC_ALL>, the result is implementation-dependent. It may be a string of concatenated locale names (separator also implementation-dependent) or a single locale name. Please consult your L<setlocale(3)> man page for details. If a second argument is given and it corresponds to a valid locale, the locale for the category is set to that value, and the function returns the now-current locale value. You can then use this in yet another call to C<setlocale()>. (In some implementations, the return value may sometimes differ from the value you gave as the second argument--think of it as an alias for the value you gave.) As the example shows, if the second argument is an empty string, the category's locale is returned to the default specified by the corresponding environment variables. Generally, this results in a return to the default that was in force when Perl started up: changes to the environment made by the application after startup may or may not be noticed, depending on your system's C library. Note that when a form of C<use locale> that doesn't include all categories is specified, Perl ignores the excluded categories. If C<setlocale()> fails for some reason (for example, an attempt to set to a locale unknown to the system), the locale for the category is not changed, and the function returns C<undef>. Starting in Perl 5.28, on multi-threaded perls compiled on systems that implement POSIX 2008 thread-safe locale operations, this function doesn't actually call the system C<setlocale>. Instead those thread-safe operations are used to emulate the C<setlocale> function, but in a thread-safe manner. You can force the thread-safe locale operations to always be used (if available) by recompiling perl with -Accflags='-DUSE_THREAD_SAFE_LOCALE' added to your call to F<Configure>. For further information about the categories, consult L<setlocale(3)>. =head2 Multi-threaded operation Beginning in Perl 5.28, multi-threaded locale operation is supported on systems that implement either the POSIX 2008 or Windows-specific thread-safe locale operations. Many modern systems, such as various Unix variants and Darwin do have this. You can tell if using locales is safe on your system by looking at the read-only boolean variable C<${^SAFE_LOCALES}>. The value is 1 if the perl is not threaded, or if it is using thread-safe locale operations. Thread-safe operations are supported in Windows starting in Visual Studio 2005, and in systems compatible with POSIX 2008. Some platforms claim to support POSIX 2008, but have buggy implementations, so that the hints files for compiling to run on them turn off attempting to use thread-safety. C<${^SAFE_LOCALES}> will be 0 on them. Be aware that writing a multi-threaded application will not be portable to a platform which lacks the native thread-safe locale support. On systems that do have it, you automatically get this behavior for threaded perls, without having to do anything. If for some reason, you don't want to use this capability (perhaps the POSIX 2008 support is buggy on your system), you can manually compile Perl to use the old non-thread-safe implementation by passing the argument C<-Accflags='-DNO_THREAD_SAFE_LOCALE'> to F<Configure>. Except on Windows, this will continue to use certain of the POSIX 2008 functions in some situations. If these are buggy, you can pass the following to F<Configure> instead or additionally: C<-Accflags='-DNO_POSIX_2008_LOCALE'>. This will also keep the code from using thread-safe locales. C<${^SAFE_LOCALES}> will be 0 on systems that turn off the thread-safe operations. Normally on unthreaded builds, the traditional C<setlocale()> is used and not the thread-safe locale functions. You can force the use of these on systems that have them by adding the C<-Accflags='-DUSE_THREAD_SAFE_LOCALE'> to F<Configure>. The initial program is started up using the locale specified from the environment, as currently, described in L</ENVIRONMENT>. All newly created threads start with C<LC_ALL> set to C<"C">>. Each thread may use C<POSIX::setlocale()> to query or switch its locale at any time, without affecting any other thread. All locale-dependent operations automatically use their thread's locale. This should be completely transparent to any applications written entirely in Perl (minus a few rarely encountered caveats given in the L</Multi-threaded> section). Information for XS module writers is given in L<perlxs/Locale-aware XS code>. =head2 Finding locales For locales available in your system, consult also L<setlocale(3)> to see whether it leads to the list of available locales (search for the I<SEE ALSO> section). If that fails, try the following command lines: locale -a nlsinfo ls /usr/lib/nls/loc ls /usr/lib/locale ls /usr/lib/nls ls /usr/share/locale and see whether they list something resembling these en_US.ISO8859-1 de_DE.ISO8859-1 ru_RU.ISO8859-5 en_US.iso88591 de_DE.iso88591 ru_RU.iso88595 en_US de_DE ru_RU en de ru english german russian english.iso88591 german.iso88591 russian.iso88595 english.roman8 russian.koi8r Sadly, even though the calling interface for C<setlocale()> has been standardized, names of locales and the directories where the configuration resides have not been. The basic form of the name is I<language_territory>B<.>I<codeset>, but the latter parts after I<language> are not always present. The I<language> and I<country> are usually from the standards B<ISO 3166> and B<ISO 639>, the two-letter abbreviations for the countries and the languages of the world, respectively. The I<codeset> part often mentions some B<ISO 8859> character set, the Latin codesets. For example, C<ISO 8859-1> is the so-called "Western European codeset" that can be used to encode most Western European languages adequately. Again, there are several ways to write even the name of that one standard. Lamentably. Two special locales are worth particular mention: "C" and "POSIX". Currently these are effectively the same locale: the difference is mainly that the first one is defined by the C standard, the second by the POSIX standard. They define the B<default locale> in which every program starts in the absence of locale information in its environment. (The I<default> default locale, if you will.) Its language is (American) English and its character codeset ASCII or, rarely, a superset thereof (such as the "DEC Multinational Character Set (DEC-MCS)"). B<Warning>. The C locale delivered by some vendors may not actually exactly match what the C standard calls for. So beware. B<NOTE>: Not all systems have the "POSIX" locale (not all systems are POSIX-conformant), so use "C" when you need explicitly to specify this default locale. =head2 LOCALE PROBLEMS You may encounter the following warning message at Perl startup: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LC_ALL = "En_US", LANG = (unset) are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). This means that your locale settings had C<LC_ALL> set to "En_US" and LANG exists but has no value. Perl tried to believe you but could not. Instead, Perl gave up and fell back to the "C" locale, the default locale that is supposed to work no matter what. (On Windows, it first tries falling back to the system default locale.) This usually means your locale settings were wrong, they mention locales your system has never heard of, or the locale installation in your system has problems (for example, some system files are broken or missing). There are quick and temporary fixes to these problems, as well as more thorough and lasting fixes. =head2 Testing for broken locales If you are building Perl from source, the Perl test suite file F<lib/locale.t> can be used to test the locales on your system. Setting the environment variable C<PERL_DEBUG_FULL_TEST> to 1 will cause it to output detailed results. For example, on Linux, you could say PERL_DEBUG_FULL_TEST=1 ./perl -T -Ilib lib/locale.t > locale.log 2>&1 Besides many other tests, it will test every locale it finds on your system to see if they conform to the POSIX standard. If any have errors, it will include a summary near the end of the output of which locales passed all its tests, and which failed, and why. =head2 Temporarily fixing locale problems The two quickest fixes are either to render Perl silent about any locale inconsistencies or to run Perl under the default locale "C". Perl's moaning about locale problems can be silenced by setting the environment variable C<PERL_BADLANG> to "0" or "". This method really just sweeps the problem under the carpet: you tell Perl to shut up even when Perl sees that something is wrong. Do not be surprised if later something locale-dependent misbehaves. Perl can be run under the "C" locale by setting the environment variable C<LC_ALL> to "C". This method is perhaps a bit more civilized than the C<PERL_BADLANG> approach, but setting C<LC_ALL> (or other locale variables) may affect other programs as well, not just Perl. In particular, external programs run from within Perl will see these changes. If you make the new settings permanent (read on), all programs you run see the changes. See L</"ENVIRONMENT"> for the full list of relevant environment variables and L</"USING LOCALES"> for their effects in Perl. Effects in other programs are easily deducible. For example, the variable C<LC_COLLATE> may well affect your B<sort> program (or whatever the program that arranges "records" alphabetically in your system is called). You can test out changing these variables temporarily, and if the new settings seem to help, put those settings into your shell startup files. Consult your local documentation for the exact details. For Bourne-like shells (B<sh>, B<ksh>, B<bash>, B<zsh>): LC_ALL=en_US.ISO8859-1 export LC_ALL This assumes that we saw the locale "en_US.ISO8859-1" using the commands discussed above. We decided to try that instead of the above faulty locale "En_US"--and in Cshish shells (B<csh>, B<tcsh>) setenv LC_ALL en_US.ISO8859-1 or if you have the "env" application you can do (in any shell) env LC_ALL=en_US.ISO8859-1 perl ... If you do not know what shell you have, consult your local helpdesk or the equivalent. =head2 Permanently fixing locale problems The slower but superior fixes are when you may be able to yourself fix the misconfiguration of your own environment variables. The mis(sing)configuration of the whole system's locales usually requires the help of your friendly system administrator. First, see earlier in this document about L</Finding locales>. That tells how to find which locales are really supported--and more importantly, installed--on your system. In our example error message, environment variables affecting the locale are listed in the order of decreasing importance (and unset variables do not matter). Therefore, having LC_ALL set to "En_US" must have been the bad choice, as shown by the error message. First try fixing locale settings listed first. Second, if using the listed commands you see something B<exactly> (prefix matches do not count and case usually counts) like "En_US" without the quotes, then you should be okay because you are using a locale name that should be installed and available in your system. In this case, see L</Permanently fixing your system's locale configuration>. =head2 Permanently fixing your system's locale configuration This is when you see something like: perl: warning: Please check that your locale settings: LC_ALL = "En_US", LANG = (unset) are supported and installed on your system. but then cannot see that "En_US" listed by the above-mentioned commands. You may see things like "en_US.ISO8859-1", but that isn't the same. In this case, try running under a locale that you can list and which somehow matches what you tried. The rules for matching locale names are a bit vague because standardization is weak in this area. See again the L</Finding locales> about general rules. =head2 Fixing system locale configuration Contact a system administrator (preferably your own) and report the exact error message you get, and ask them to read this same documentation you are now reading. They should be able to check whether there is something wrong with the locale configuration of the system. The L</Finding locales> section is unfortunately a bit vague about the exact commands and places because these things are not that standardized. =head2 The localeconv function The C<POSIX::localeconv()> function allows you to get particulars of the locale-dependent numeric formatting information specified by the current underlying C<LC_NUMERIC> and C<LC_MONETARY> locales (regardless of whether called from within the scope of C<S<use locale>> or not). (If you just want the name of the current locale for a particular category, use C<POSIX::setlocale()> with a single parameter--see L</The setlocale function>.) use POSIX qw(locale_h); # Get a reference to a hash of locale-dependent info $locale_values = localeconv(); # Output sorted list of the values for (sort keys %$locale_values) { printf "%-20s = %s\n", $_, $locale_values->{$_} } C<localeconv()> takes no arguments, and returns B<a reference to> a hash. The keys of this hash are variable names for formatting, such as C<decimal_point> and C<thousands_sep>. The values are the corresponding, er, values. See L<POSIX/localeconv> for a longer example listing the categories an implementation might be expected to provide; some provide more and others fewer. You don't need an explicit C<use locale>, because C<localeconv()> always observes the current locale. Here's a simple-minded example program that rewrites its command-line parameters as integers correctly formatted in the current locale: use POSIX qw(locale_h); # Get some of locale's numeric formatting parameters my ($thousands_sep, $grouping) = @{localeconv()}{'thousands_sep', 'grouping'}; # Apply defaults if values are missing $thousands_sep = ',' unless $thousands_sep; # grouping and mon_grouping are packed lists # of small integers (characters) telling the # grouping (thousand_seps and mon_thousand_seps # being the group dividers) of numbers and # monetary quantities. The integers' meanings: # 255 means no more grouping, 0 means repeat # the previous grouping, 1-254 means use that # as the current grouping. Grouping goes from # right to left (low to high digits). In the # below we cheat slightly by never using anything # else than the first grouping (whatever that is). if ($grouping) { @grouping = unpack("C*", $grouping); } else { @grouping = (3); } # Format command line params for current locale for (@ARGV) { $_ = int; # Chop non-integer part 1 while s/(\d)(\d{$grouping[0]}($|$thousands_sep))/$1$thousands_sep$2/; print "$_"; } print "\n"; Note that if the platform doesn't have C<LC_NUMERIC> and/or C<LC_MONETARY> available or enabled, the corresponding elements of the hash will be missing. =head2 I18N::Langinfo Another interface for querying locale-dependent information is the C<I18N::Langinfo::langinfo()> function. The following example will import the C<langinfo()> function itself and three constants to be used as arguments to C<langinfo()>: a constant for the abbreviated first day of the week (the numbering starts from Sunday = 1) and two more constants for the affirmative and negative answers for a yes/no question in the current locale. use I18N::Langinfo qw(langinfo ABDAY_1 YESSTR NOSTR); my ($abday_1, $yesstr, $nostr) = map { langinfo } qw(ABDAY_1 YESSTR NOSTR); print "$abday_1? [$yesstr/$nostr] "; In other words, in the "C" (or English) locale the above will probably print something like: Sun? [yes/no] See L<I18N::Langinfo> for more information. =head1 LOCALE CATEGORIES The following subsections describe basic locale categories. Beyond these, some combination categories allow manipulation of more than one basic category at a time. See L</"ENVIRONMENT"> for a discussion of these. =head2 Category C<LC_COLLATE>: Collation: Text Comparisons and Sorting In the scope of a S<C<use locale>> form that includes collation, Perl looks to the C<LC_COLLATE> environment variable to determine the application's notions on collation (ordering) of characters. For example, "b" follows "a" in Latin alphabets, but where do "E<aacute>" and "E<aring>" belong? And while "color" follows "chocolate" in English, what about in traditional Spanish? The following collations all make sense and you may meet any of them if you C<"use locale">. A B C D E a b c d e A a B b C c D d E e a A b B c C d D e E a b c d e A B C D E Here is a code snippet to tell what "word" characters are in the current locale, in that locale's order: use locale; print +(sort grep /\w/, map { chr } 0..255), "\n"; Compare this with the characters that you see and their order if you state explicitly that the locale should be ignored: no locale; print +(sort grep /\w/, map { chr } 0..255), "\n"; This machine-native collation (which is what you get unless S<C<use locale>> has appeared earlier in the same block) must be used for sorting raw binary data, whereas the locale-dependent collation of the first example is useful for natural text. As noted in L</USING LOCALES>, C<cmp> compares according to the current collation locale when C<use locale> is in effect, but falls back to a char-by-char comparison for strings that the locale says are equal. You can use C<POSIX::strcoll()> if you don't want this fall-back: use POSIX qw(strcoll); $equal_in_locale = !strcoll("space and case ignored", "SpaceAndCaseIgnored"); C<$equal_in_locale> will be true if the collation locale specifies a dictionary-like ordering that ignores space characters completely and which folds case. Perl uses the platform's C library collation functions C<strcoll()> and C<strxfrm()>. That means you get whatever they give. On some platforms, these functions work well on UTF-8 locales, giving a reasonable default collation for the code points that are important in that locale. (And if they aren't working well, the problem may only be that the locale definition is deficient, so can be fixed by using a better definition file. Unicode's definitions (see L</Freely available locale definitions>) provide reasonable UTF-8 locale collation definitions.) Starting in Perl v5.26, Perl's use of these functions has been made more seamless. This may be sufficient for your needs. For more control, and to make sure strings containing any code point (not just the ones important in the locale) collate properly, the L<Unicode::Collate> module is suggested. In non-UTF-8 locales (hence single byte), code points above 0xFF are technically invalid. But if present, again starting in v5.26, they will collate to the same position as the highest valid code point does. This generally gives good results, but the collation order may be skewed if the valid code point gets special treatment when it forms particular sequences with other characters as defined by the locale. When two strings collate identically, the code point order is used as a tie breaker. If Perl detects that there are problems with the locale collation order, it reverts to using non-locale collation rules for that locale. If you have a single string that you want to check for "equality in locale" against several others, you might think you could gain a little efficiency by using C<POSIX::strxfrm()> in conjunction with C<eq>: use POSIX qw(strxfrm); $xfrm_string = strxfrm("Mixed-case string"); print "locale collation ignores spaces\n" if $xfrm_string eq strxfrm("Mixed-casestring"); print "locale collation ignores hyphens\n" if $xfrm_string eq strxfrm("Mixedcase string"); print "locale collation ignores case\n" if $xfrm_string eq strxfrm("mixed-case string"); C<strxfrm()> takes a string and maps it into a transformed string for use in char-by-char comparisons against other transformed strings during collation. "Under the hood", locale-affected Perl comparison operators call C<strxfrm()> for both operands, then do a char-by-char comparison of the transformed strings. By calling C<strxfrm()> explicitly and using a non locale-affected comparison, the example attempts to save a couple of transformations. But in fact, it doesn't save anything: Perl magic (see L<perlguts/Magic Variables>) creates the transformed version of a string the first time it's needed in a comparison, then keeps this version around in case it's needed again. An example rewritten the easy way with C<cmp> runs just about as fast. It also copes with null characters embedded in strings; if you call C<strxfrm()> directly, it treats the first null it finds as a terminator. Don't expect the transformed strings it produces to be portable across systems--or even from one revision of your operating system to the next. In short, don't call C<strxfrm()> directly: let Perl do it for you. Note: C<use locale> isn't shown in some of these examples because it isn't needed: C<strcoll()> and C<strxfrm()> are POSIX functions which use the standard system-supplied C<libc> functions that always obey the current C<LC_COLLATE> locale. =head2 Category C<LC_CTYPE>: Character Types In the scope of a S<C<use locale>> form that includes C<LC_CTYPE>, Perl obeys the C<LC_CTYPE> locale setting. This controls the application's notion of which characters are alphabetic, numeric, punctuation, I<etc>. This affects Perl's C<\w> regular expression metanotation, which stands for alphanumeric characters--that is, alphabetic, numeric, and the platform's native underscore. (Consult L<perlre> for more information about regular expressions.) Thanks to C<LC_CTYPE>, depending on your locale setting, characters like "E<aelig>", "E<eth>", "E<szlig>", and "E<oslash>" may be understood as C<\w> characters. It also affects things like C<\s>, C<\D>, and the POSIX character classes, like C<[[:graph:]]>. (See L<perlrecharclass> for more information on all these.) The C<LC_CTYPE> locale also provides the map used in transliterating characters between lower and uppercase. This affects the case-mapping functions--C<fc()>, C<lc()>, C<lcfirst()>, C<uc()>, and C<ucfirst()>; case-mapping interpolation with C<\F>, C<\l>, C<\L>, C<\u>, or C<\U> in double-quoted strings and C<s///> substitutions; and case-insensitive regular expression pattern matching using the C<i> modifier. Starting in v5.20, Perl supports UTF-8 locales for C<LC_CTYPE>, but otherwise Perl only supports single-byte locales, such as the ISO 8859 series. This means that wide character locales, for example for Asian languages, are not well-supported. Use of these locales may cause core dumps. If the platform has the capability for Perl to detect such a locale, starting in Perl v5.22, L<Perl will warn, default enabled|warnings/Category Hierarchy>, using the C<locale> warning category, whenever such a locale is switched into. The UTF-8 locale support is actually a superset of POSIX locales, because it is really full Unicode behavior as if no C<LC_CTYPE> locale were in effect at all (except for tainting; see L</SECURITY>). POSIX locales, even UTF-8 ones, are lacking certain concepts in Unicode, such as the idea that changing the case of a character could expand to be more than one character. Perl in a UTF-8 locale, will give you that expansion. Prior to v5.20, Perl treated a UTF-8 locale on some platforms like an ISO 8859-1 one, with some restrictions, and on other platforms more like the "C" locale. For releases v5.16 and v5.18, C<S<use locale 'not_characters>> could be used as a workaround for this (see L</Unicode and UTF-8>). Note that there are quite a few things that are unaffected by the current locale. Any literal character is the native character for the given platform. Hence 'A' means the character at code point 65 on ASCII platforms, and 193 on EBCDIC. That may or may not be an 'A' in the current locale, if that locale even has an 'A'. Similarly, all the escape sequences for particular characters, C<\n> for example, always mean the platform's native one. This means, for example, that C<\N> in regular expressions (every character but new-line) works on the platform character set. Starting in v5.22, Perl will by default warn when switching into a locale that redefines any ASCII printable character (plus C<\t> and C<\n>) into a different class than expected. This is likely to happen on modern locales only on EBCDIC platforms, where, for example, a CCSID 0037 locale on a CCSID 1047 machine moves C<"[">, but it can happen on ASCII platforms with the ISO 646 and other 7-bit locales that are essentially obsolete. Things may still work, depending on what features of Perl are used by the program. For example, in the example from above where C<"|"> becomes a C<\w>, and there are no regular expressions where this matters, the program may still work properly. The warning lists all the characters that it can determine could be adversely affected. B<Note:> A broken or malicious C<LC_CTYPE> locale definition may result in clearly ineligible characters being considered to be alphanumeric by your application. For strict matching of (mundane) ASCII letters and digits--for example, in command strings--locale-aware applications should use C<\w> with the C</a> regular expression modifier. See L</"SECURITY">. =head2 Category C<LC_NUMERIC>: Numeric Formatting After a proper C<POSIX::setlocale()> call, and within the scope of a C<use locale> form that includes numerics, Perl obeys the C<LC_NUMERIC> locale information, which controls an application's idea of how numbers should be formatted for human readability. In most implementations the only effect is to change the character used for the decimal point--perhaps from "." to ",". The functions aren't aware of such niceties as thousands separation and so on. (See L</The localeconv function> if you care about these things.) use POSIX qw(strtod setlocale LC_NUMERIC); use locale; setlocale LC_NUMERIC, ""; $n = 5/2; # Assign numeric 2.5 to $n $a = " $n"; # Locale-dependent conversion to string print "half five is $n\n"; # Locale-dependent output printf "half five is %g\n", $n; # Locale-dependent output print "DECIMAL POINT IS COMMA\n" if $n == (strtod("2,5"))[0]; # Locale-dependent conversion See also L<I18N::Langinfo> and C<RADIXCHAR>. =head2 Category C<LC_MONETARY>: Formatting of monetary amounts The C standard defines the C<LC_MONETARY> category, but not a function that is affected by its contents. (Those with experience of standards committees will recognize that the working group decided to punt on the issue.) Consequently, Perl essentially takes no notice of it. If you really want to use C<LC_MONETARY>, you can query its contents--see L</The localeconv function>--and use the information that it returns in your application's own formatting of currency amounts. However, you may well find that the information, voluminous and complex though it may be, still does not quite meet your requirements: currency formatting is a hard nut to crack. See also L<I18N::Langinfo> and C<CRNCYSTR>. =head2 Category C<LC_TIME>: Respresentation of time Output produced by C<POSIX::strftime()>, which builds a formatted human-readable date/time string, is affected by the current C<LC_TIME> locale. Thus, in a French locale, the output produced by the C<%B> format element (full month name) for the first month of the year would be "janvier". Here's how to get a list of long month names in the current locale: use POSIX qw(strftime); for (0..11) { $long_month_name[$_] = strftime("%B", 0, 0, 0, 1, $_, 96); } Note: C<use locale> isn't needed in this example: C<strftime()> is a POSIX function which uses the standard system-supplied C<libc> function that always obeys the current C<LC_TIME> locale. See also L<I18N::Langinfo> and C<ABDAY_1>..C<ABDAY_7>, C<DAY_1>..C<DAY_7>, C<ABMON_1>..C<ABMON_12>, and C<ABMON_1>..C<ABMON_12>. =head2 Other categories The remaining locale categories are not currently used by Perl itself. But again note that things Perl interacts with may use these, including extensions outside the standard Perl distribution, and by the operating system and its utilities. Note especially that the string value of C<$!> and the error messages given by external utilities may be changed by C<LC_MESSAGES>. If you want to have portable error codes, use C<%!>. See L<Errno>. =head1 SECURITY Although the main discussion of Perl security issues can be found in L<perlsec>, a discussion of Perl's locale handling would be incomplete if it did not draw your attention to locale-dependent security issues. Locales--particularly on systems that allow unprivileged users to build their own locales--are untrustworthy. A malicious (or just plain broken) locale can make a locale-aware application give unexpected results. Here are a few possibilities: =over 4 =item * Regular expression checks for safe file names or mail addresses using C<\w> may be spoofed by an C<LC_CTYPE> locale that claims that characters such as C<"E<gt>"> and C<"|"> are alphanumeric. =item * String interpolation with case-mapping, as in, say, C<$dest = "C:\U$name.$ext">, may produce dangerous results if a bogus C<LC_CTYPE> case-mapping table is in effect. =item * A sneaky C<LC_COLLATE> locale could result in the names of students with "D" grades appearing ahead of those with "A"s. =item * An application that takes the trouble to use information in C<LC_MONETARY> may format debits as if they were credits and vice versa if that locale has been subverted. Or it might make payments in US dollars instead of Hong Kong dollars. =item * The date and day names in dates formatted by C<strftime()> could be manipulated to advantage by a malicious user able to subvert the C<LC_DATE> locale. ("Look--it says I wasn't in the building on Sunday.") =back Such dangers are not peculiar to the locale system: any aspect of an application's environment which may be modified maliciously presents similar challenges. Similarly, they are not specific to Perl: any programming language that allows you to write programs that take account of their environment exposes you to these issues. Perl cannot protect you from all possibilities shown in the examples--there is no substitute for your own vigilance--but, when C<use locale> is in effect, Perl uses the tainting mechanism (see L<perlsec>) to mark string results that become locale-dependent, and which may be untrustworthy in consequence. Here is a summary of the tainting behavior of operators and functions that may be affected by the locale: =over 4 =item * B<Comparison operators> (C<lt>, C<le>, C<ge>, C<gt> and C<cmp>): Scalar true/false (or less/equal/greater) result is never tainted. =item * B<Case-mapping interpolation> (with C<\l>, C<\L>, C<\u>, C<\U>, or C<\F>) The result string containing interpolated material is tainted if a C<use locale> form that includes C<LC_CTYPE> is in effect. =item * B<Matching operator> (C<m//>): Scalar true/false result never tainted. All subpatterns, either delivered as a list-context result or as C<$1> I<etc>., are tainted if a C<use locale> form that includes C<LC_CTYPE> is in effect, and the subpattern regular expression contains a locale-dependent construct. These constructs include C<\w> (to match an alphanumeric character), C<\W> (non-alphanumeric character), C<\b> and C<\B> (word-boundary and non-boundardy, which depend on what C<\w> and C<\W> match), C<\s> (whitespace character), C<\S> (non whitespace character), C<\d> and C<\D> (digits and non-digits), and the POSIX character classes, such as C<[:alpha:]> (see L<perlrecharclass/POSIX Character Classes>). Tainting is also likely if the pattern is to be matched case-insensitively (via C</i>). The exception is if all the code points to be matched this way are above 255 and do not have folds under Unicode rules to below 256. Tainting is not done for these because Perl only uses Unicode rules for such code points, and those rules are the same no matter what the current locale. The matched-pattern variables, C<$&>, C<$`> (pre-match), C<$'> (post-match), and C<$+> (last match) also are tainted. =item * B<Substitution operator> (C<s///>): Has the same behavior as the match operator. Also, the left operand of C<=~> becomes tainted when a C<use locale> form that includes C<LC_CTYPE> is in effect, if modified as a result of a substitution based on a regular expression match involving any of the things mentioned in the previous item, or of case-mapping, such as C<\l>, C<\L>,C<\u>, C<\U>, or C<\F>. =item * B<Output formatting functions> (C<printf()> and C<write()>): Results are never tainted because otherwise even output from print, for example C<print(1/7)>, should be tainted if C<use locale> is in effect. =item * B<Case-mapping functions> (C<lc()>, C<lcfirst()>, C<uc()>, C<ucfirst()>): Results are tainted if a C<use locale> form that includes C<LC_CTYPE> is in effect. =item * B<POSIX locale-dependent functions> (C<localeconv()>, C<strcoll()>, C<strftime()>, C<strxfrm()>): Results are never tainted. =back Three examples illustrate locale-dependent tainting. The first program, which ignores its locale, won't run: a value taken directly from the command line may not be used to name an output file when taint checks are enabled. #/usr/local/bin/perl -T # Run with taint checking # Command line sanity check omitted... $tainted_output_file = shift; open(F, ">$tainted_output_file") or warn "Open of $tainted_output_file failed: $!\n"; The program can be made to run by "laundering" the tainted value through a regular expression: the second example--which still ignores locale information--runs, creating the file named on its command line if it can. #/usr/local/bin/perl -T $tainted_output_file = shift; $tainted_output_file =~ m%[\w/]+%; $untainted_output_file = $&; open(F, ">$untainted_output_file") or warn "Open of $untainted_output_file failed: $!\n"; Compare this with a similar but locale-aware program: #/usr/local/bin/perl -T $tainted_output_file = shift; use locale; $tainted_output_file =~ m%[\w/]+%; $localized_output_file = $&; open(F, ">$localized_output_file") or warn "Open of $localized_output_file failed: $!\n"; This third program fails to run because C<$&> is tainted: it is the result of a match involving C<\w> while C<use locale> is in effect. =head1 ENVIRONMENT =over 12 =item PERL_SKIP_LOCALE_INIT This environment variable, available starting in Perl v5.20, if set (to any value), tells Perl to not use the rest of the environment variables to initialize with. Instead, Perl uses whatever the current locale settings are. This is particularly useful in embedded environments, see L<perlembed/Using embedded Perl with POSIX locales>. =item PERL_BADLANG A string that can suppress Perl's warning about failed locale settings at startup. Failure can occur if the locale support in the operating system is lacking (broken) in some way--or if you mistyped the name of a locale when you set up your environment. If this environment variable is absent, or has a value other than "0" or "", Perl will complain about locale setting failures. B<NOTE>: C<PERL_BADLANG> only gives you a way to hide the warning message. The message tells about some problem in your system's locale support, and you should investigate what the problem is. =back The following environment variables are not specific to Perl: They are part of the standardized (ISO C, XPG4, POSIX 1.c) C<setlocale()> method for controlling an application's opinion on data. Windows is non-POSIX, but Perl arranges for the following to work as described anyway. If the locale given by an environment variable is not valid, Perl tries the next lower one in priority. If none are valid, on Windows, the system default locale is then tried. If all else fails, the C<"C"> locale is used. If even that doesn't work, something is badly broken, but Perl tries to forge ahead with whatever the locale settings might be. =over 12 =item C<LC_ALL> C<LC_ALL> is the "override-all" locale environment variable. If set, it overrides all the rest of the locale environment variables. =item C<LANGUAGE> B<NOTE>: C<LANGUAGE> is a GNU extension, it affects you only if you are using the GNU libc. This is the case if you are using e.g. Linux. If you are using "commercial" Unixes you are most probably I<not> using GNU libc and you can ignore C<LANGUAGE>. However, in the case you are using C<LANGUAGE>: it affects the language of informational, warning, and error messages output by commands (in other words, it's like C<LC_MESSAGES>) but it has higher priority than C<LC_ALL>. Moreover, it's not a single value but instead a "path" (":"-separated list) of I<languages> (not locales). See the GNU C<gettext> library documentation for more information. =item C<LC_CTYPE> In the absence of C<LC_ALL>, C<LC_CTYPE> chooses the character type locale. In the absence of both C<LC_ALL> and C<LC_CTYPE>, C<LANG> chooses the character type locale. =item C<LC_COLLATE> In the absence of C<LC_ALL>, C<LC_COLLATE> chooses the collation (sorting) locale. In the absence of both C<LC_ALL> and C<LC_COLLATE>, C<LANG> chooses the collation locale. =item C<LC_MONETARY> In the absence of C<LC_ALL>, C<LC_MONETARY> chooses the monetary formatting locale. In the absence of both C<LC_ALL> and C<LC_MONETARY>, C<LANG> chooses the monetary formatting locale. =item C<LC_NUMERIC> In the absence of C<LC_ALL>, C<LC_NUMERIC> chooses the numeric format locale. In the absence of both C<LC_ALL> and C<LC_NUMERIC>, C<LANG> chooses the numeric format. =item C<LC_TIME> In the absence of C<LC_ALL>, C<LC_TIME> chooses the date and time formatting locale. In the absence of both C<LC_ALL> and C<LC_TIME>, C<LANG> chooses the date and time formatting locale. =item C<LANG> C<LANG> is the "catch-all" locale environment variable. If it is set, it is used as the last resort after the overall C<LC_ALL> and the category-specific C<LC_I<foo>>. =back =head2 Examples The C<LC_NUMERIC> controls the numeric output: use locale; use POSIX qw(locale_h); # Imports setlocale() and the LC_ constants. setlocale(LC_NUMERIC, "fr_FR") or die "Pardon"; printf "%g\n", 1.23; # If the "fr_FR" succeeded, probably shows 1,23. and also how strings are parsed by C<POSIX::strtod()> as numbers: use locale; use POSIX qw(locale_h strtod); setlocale(LC_NUMERIC, "de_DE") or die "Entschuldigung"; my $x = strtod("2,34") + 5; print $x, "\n"; # Probably shows 7,34. =head1 NOTES =head2 String C<eval> and C<LC_NUMERIC> A string L<eval|perlfunc/eval EXPR> parses its expression as standard Perl. It is therefore expecting the decimal point to be a dot. If C<LC_NUMERIC> is set to have this be a comma instead, the parsing will be confused, perhaps silently. use locale; use POSIX qw(locale_h); setlocale(LC_NUMERIC, "fr_FR") or die "Pardon"; my $a = 1.2; print eval "$a + 1.5"; print "\n"; prints C<13,5>. This is because in that locale, the comma is the decimal point character. The C<eval> thus expands to: eval "1,2 + 1.5" and the result is not what you likely expected. No warnings are generated. If you do string C<eval>'s within the scope of S<C<use locale>>, you should instead change the C<eval> line to do something like: print eval "no locale; $a + 1.5"; This prints C<2.7>. You could also exclude C<LC_NUMERIC>, if you don't need it, by use locale ':!numeric'; =head2 Backward compatibility Versions of Perl prior to 5.004 B<mostly> ignored locale information, generally behaving as if something similar to the C<"C"> locale were always in force, even if the program environment suggested otherwise (see L</The setlocale function>). By default, Perl still behaves this way for backward compatibility. If you want a Perl application to pay attention to locale information, you B<must> use the S<C<use locale>> pragma (see L</The "use locale" pragma>) or, in the unlikely event that you want to do so for just pattern matching, the C</l> regular expression modifier (see L<perlre/Character set modifiers>) to instruct it to do so. Versions of Perl from 5.002 to 5.003 did use the C<LC_CTYPE> information if available; that is, C<\w> did understand what were the letters according to the locale environment variables. The problem was that the user had no control over the feature: if the C library supported locales, Perl used them. =head2 I18N:Collate obsolete In versions of Perl prior to 5.004, per-locale collation was possible using the C<I18N::Collate> library module. This module is now mildly obsolete and should be avoided in new applications. The C<LC_COLLATE> functionality is now integrated into the Perl core language: One can use locale-specific scalar data completely normally with C<use locale>, so there is no longer any need to juggle with the scalar references of C<I18N::Collate>. =head2 Sort speed and memory use impacts Comparing and sorting by locale is usually slower than the default sorting; slow-downs of two to four times have been observed. It will also consume more memory: once a Perl scalar variable has participated in any string comparison or sorting operation obeying the locale collation rules, it will take 3-15 times more memory than before. (The exact multiplier depends on the string's contents, the operating system and the locale.) These downsides are dictated more by the operating system's implementation of the locale system than by Perl. =head2 Freely available locale definitions The Unicode CLDR project extracts the POSIX portion of many of its locales, available at https://unicode.org/Public/cldr/2.0.1/ (Newer versions of CLDR require you to compute the POSIX data yourself. See L<http://unicode.org/Public/cldr/latest/>.) There is a large collection of locale definitions at: http://std.dkuug.dk/i18n/WG15-collection/locales/ You should be aware that it is unsupported, and is not claimed to be fit for any purpose. If your system allows installation of arbitrary locales, you may find the definitions useful as they are, or as a basis for the development of your own locales. =head2 I18n and l10n "Internationalization" is often abbreviated as B<i18n> because its first and last letters are separated by eighteen others. (You may guess why the internalin ... internaliti ... i18n tends to get abbreviated.) In the same way, "localization" is often abbreviated to B<l10n>. =head2 An imperfect standard Internationalization, as defined in the C and POSIX standards, can be criticized as incomplete and ungainly. They also have a tendency, like standards groups, to divide the world into nations, when we all know that the world can equally well be divided into bankers, bikers, gamers, and so on. =head1 Unicode and UTF-8 The support of Unicode is new starting from Perl version v5.6, and more fully implemented in versions v5.8 and later. See L<perluniintro>. Starting in Perl v5.20, UTF-8 locales are supported in Perl, except C<LC_COLLATE> is only partially supported; collation support is improved in Perl v5.26 to a level that may be sufficient for your needs (see L</Category C<LC_COLLATE>: Collation: Text Comparisons and Sorting>). If you have Perl v5.16 or v5.18 and can't upgrade, you can use use locale ':not_characters'; When this form of the pragma is used, only the non-character portions of locales are used by Perl, for example C<LC_NUMERIC>. Perl assumes that you have translated all the characters it is to operate on into Unicode (actually the platform's native character set (ASCII or EBCDIC) plus Unicode). For data in files, this can conveniently be done by also specifying use open ':locale'; This pragma arranges for all inputs from files to be translated into Unicode from the current locale as specified in the environment (see L</ENVIRONMENT>), and all outputs to files to be translated back into the locale. (See L<open>). On a per-filehandle basis, you can instead use the L<PerlIO::locale> module, or the L<Encode::Locale> module, both available from CPAN. The latter module also has methods to ease the handling of C<ARGV> and environment variables, and can be used on individual strings. If you know that all your locales will be UTF-8, as many are these days, you can use the L<B<-C>|perlrun/-C [numberE<sol>list]> command line switch. This form of the pragma allows essentially seamless handling of locales with Unicode. The collation order will be by Unicode code point order. L<Unicode::Collate> can be used to get Unicode rules collation. All the modules and switches just described can be used in v5.20 with just plain C<use locale>, and, should the input locales not be UTF-8, you'll get the less than ideal behavior, described below, that you get with pre-v5.16 Perls, or when you use the locale pragma without the C<:not_characters> parameter in v5.16 and v5.18. If you are using exclusively UTF-8 locales in v5.20 and higher, the rest of this section does not apply to you. There are two cases, multi-byte and single-byte locales. First multi-byte: The only multi-byte (or wide character) locale that Perl is ever likely to support is UTF-8. This is due to the difficulty of implementation, the fact that high quality UTF-8 locales are now published for every area of the world (L<https://unicode.org/Public/cldr/2.0.1/> for ones that are already set-up, but from an earlier version; L<https://unicode.org/Public/cldr/latest/> for the most up-to-date, but you have to extract the POSIX information yourself), and that failing all that you can use the L<Encode> module to translate to/from your locale. So, you'll have to do one of those things if you're using one of these locales, such as Big5 or Shift JIS. For UTF-8 locales, in Perls (pre v5.20) that don't have full UTF-8 locale support, they may work reasonably well (depending on your C library implementation) simply because both they and Perl store characters that take up multiple bytes the same way. However, some, if not most, C library implementations may not process the characters in the upper half of the Latin-1 range (128 - 255) properly under C<LC_CTYPE>. To see if a character is a particular type under a locale, Perl uses the functions like C<isalnum()>. Your C library may not work for UTF-8 locales with those functions, instead only working under the newer wide library functions like C<iswalnum()>, which Perl does not use. These multi-byte locales are treated like single-byte locales, and will have the restrictions described below. Starting in Perl v5.22 a warning message is raised when Perl detects a multi-byte locale that it doesn't fully support. For single-byte locales, Perl generally takes the tack to use locale rules on code points that can fit in a single byte, and Unicode rules for those that can't (though this isn't uniformly applied, see the note at the end of this section). This prevents many problems in locales that aren't UTF-8. Suppose the locale is ISO8859-7, Greek. The character at 0xD7 there is a capital Chi. But in the ISO8859-1 locale, Latin1, it is a multiplication sign. The POSIX regular expression character class C<[[:alpha:]]> will magically match 0xD7 in the Greek locale but not in the Latin one. However, there are places where this breaks down. Certain Perl constructs are for Unicode only, such as C<\p{Alpha}>. They assume that 0xD7 always has its Unicode meaning (or the equivalent on EBCDIC platforms). Since Latin1 is a subset of Unicode and 0xD7 is the multiplication sign in both Latin1 and Unicode, C<\p{Alpha}> will never match it, regardless of locale. A similar issue occurs with C<\N{...}>. Prior to v5.20, it is therefore a bad idea to use C<\p{}> or C<\N{}> under plain C<use locale>--I<unless> you can guarantee that the locale will be ISO8859-1. Use POSIX character classes instead. Another problem with this approach is that operations that cross the single byte/multiple byte boundary are not well-defined, and so are disallowed. (This boundary is between the codepoints at 255/256.) For example, lower casing LATIN CAPITAL LETTER Y WITH DIAERESIS (U+0178) should return LATIN SMALL LETTER Y WITH DIAERESIS (U+00FF). But in the Greek locale, for example, there is no character at 0xFF, and Perl has no way of knowing what the character at 0xFF is really supposed to represent. Thus it disallows the operation. In this mode, the lowercase of U+0178 is itself. The same problems ensue if you enable automatic UTF-8-ification of your standard file handles, default C<open()> layer, and C<@ARGV> on non-ISO8859-1, non-UTF-8 locales (by using either the B<-C> command line switch or the C<PERL_UNICODE> environment variable; see L<perlrun|perlrun/-C [numberE<sol>list]>). Things are read in as UTF-8, which would normally imply a Unicode interpretation, but the presence of a locale causes them to be interpreted in that locale instead. For example, a 0xD7 code point in the Unicode input, which should mean the multiplication sign, won't be interpreted by Perl that way under the Greek locale. This is not a problem I<provided> you make certain that all locales will always and only be either an ISO8859-1, or, if you don't have a deficient C library, a UTF-8 locale. Still another problem is that this approach can lead to two code points meaning the same character. Thus in a Greek locale, both U+03A7 and U+00D7 are GREEK CAPITAL LETTER CHI. Because of all these problems, starting in v5.22, Perl will raise a warning if a multi-byte (hence Unicode) code point is used when a single-byte locale is in effect. (Although it doesn't check for this if doing so would unreasonably slow execution down.) Vendor locales are notoriously buggy, and it is difficult for Perl to test its locale-handling code because this interacts with code that Perl has no control over; therefore the locale-handling code in Perl may be buggy as well. (However, the Unicode-supplied locales should be better, and there is a feed back mechanism to correct any problems. See L</Freely available locale definitions>.) If you have Perl v5.16, the problems mentioned above go away if you use the C<:not_characters> parameter to the locale pragma (except for vendor bugs in the non-character portions). If you don't have v5.16, and you I<do> have locales that work, using them may be worthwhile for certain specific purposes, as long as you keep in mind the gotchas already mentioned. For example, if the collation for your locales works, it runs faster under locales than under L<Unicode::Collate>; and you gain access to such things as the local currency symbol and the names of the months and days of the week. (But to hammer home the point, in v5.16, you get this access without the downsides of locales by using the C<:not_characters> form of the pragma.) Note: The policy of using locale rules for code points that can fit in a byte, and Unicode rules for those that can't is not uniformly applied. Pre-v5.12, it was somewhat haphazard; in v5.12 it was applied fairly consistently to regular expression matching except for bracketed character classes; in v5.14 it was extended to all regex matches; and in v5.16 to the casing operations such as C<\L> and C<uc()>. For collation, in all releases so far, the system's C<strxfrm()> function is called, and whatever it does is what you get. Starting in v5.26, various bugs are fixed with the way perl uses this function. =head1 BUGS =head2 Collation of strings containing embedded C<NUL> characters C<NUL> characters will sort the same as the lowest collating control character does, or to C<"\001"> in the unlikely event that there are no control characters at all in the locale. In cases where the strings don't contain this non-C<NUL> control, the results will be correct, and in many locales, this control, whatever it might be, will rarely be encountered. But there are cases where a C<NUL> should sort before this control, but doesn't. If two strings do collate identically, the one containing the C<NUL> will sort to earlier. Prior to 5.26, there were more bugs. =head2 Multi-threaded XS code or C-language libraries called from it that use the system L<C<setlocale(3)>> function (except on Windows) likely will not work from a multi-threaded application without changes. See L<perlxs/Locale-aware XS code>. An XS module that is locale-dependent could have been written under the assumption that it will never be called in a multi-threaded environment, and so uses other non-locale constructs that aren't multi-thread-safe. See L<perlxs/Thread-aware system interfaces>. POSIX does not define a way to get the name of the current per-thread locale. Some systems, such as Darwin and NetBSD do implement a function, L<querylocale(3)> to do this. On non-Windows systems without it, such as Linux, there are some additional caveats: =over =item * An embedded perl needs to be started up while the global locale is in effect. See L<perlembed/Using embedded Perl with POSIX locales>. =item * It becomes more important for perl to know about all the possible locale categories on the platform, even if they aren't apparently used in your program. Perl knows all of the Linux ones. If your platform has others, you can submit an issue at L<https://github.com/Perl/perl5/issues> for inclusion of it in the next release. In the meantime, it is possible to edit the Perl source to teach it about the category, and then recompile. Search for instances of, say, C<LC_PAPER> in the source, and use that as a template to add the omitted one. =item * It is possible, though hard to do, to call C<POSIX::setlocale> with a locale that it doesn't recognize as syntactically legal, but actually is legal on that system. This should happen only with embedded perls, or if you hand-craft a locale name yourself. =back =head2 Broken systems In certain systems, the operating system's locale support is broken and cannot be fixed or used by Perl. Such deficiencies can and will result in mysterious hangs and/or Perl core dumps when C<use locale> is in effect. When confronted with such a system, please report in excruciating detail to <L<https://github.com/Perl/perl5/issues>>, and also contact your vendor: bug fixes may exist for these problems in your operating system. Sometimes such bug fixes are called an operating system upgrade. If you have the source for Perl, include in the bug report the output of the test described above in L</Testing for broken locales>. =head1 SEE ALSO L<I18N::Langinfo>, L<perluniintro>, L<perlunicode>, L<open>, L<POSIX/localeconv>, L<POSIX/setlocale>, L<POSIX/strcoll>, L<POSIX/strftime>, L<POSIX/strtod>, L<POSIX/strxfrm>. For special considerations when Perl is embedded in a C program, see L<perlembed/Using embedded Perl with POSIX locales>. =head1 HISTORY Jarkko Hietaniemi's original F<perli18n.pod> heavily hacked by Dominic Dunlop, assisted by the perl5-porters. Prose worked over a bit by Tom Christiansen, and now maintained by Perl 5 porters. perlsecpolicy.pod 0000644 00000045772 15125556335 0010156 0 ustar 00 =encoding utf-8 =for stopwords CVE perlsecpolicy SV perl Perl SDBM HackerOne Mitre =head1 NAME perlsecpolicy - Perl security report handling policy =head1 DESCRIPTION The Perl project takes security issues seriously. The responsibility for handling security reports in a timely and effective manner has been delegated to a security team composed of a subset of the Perl core developers. This document describes how the Perl security team operates and how the team evaluates new security reports. =head1 REPORTING SECURITY ISSUES IN PERL If you believe you have found a security vulnerability in the Perl interpreter or modules maintained in the core Perl codebase, email the details to L<perl-security@perl.org|mailto:perl-security@perl.org>. This address is a closed membership mailing list monitored by the Perl security team. You should receive an initial response to your report within 72 hours. If you do not receive a response in that time, please contact the security team lead L<John Lightsey|mailto:john@04755.net> and the L<Perl steering council|mailto:steering-council@perl.org>. When members of the security team reply to your messages, they will generally include the perl-security@perl.org address in the "To" or "CC" fields of the response. This allows all of the security team to follow the discussion and chime in as needed. Use the "Reply-all" functionality of your email client when you send subsequent responses so that the entire security team receives the message. The security team will evaluate your report and make an initial determination of whether it is likely to fit the scope of issues the team handles. General guidelines about how this is determined are detailed in the L</WHAT ARE SECURITY ISSUES> section. If your report meets the team's criteria, an issue will be opened in the team's private issue tracker and you will be provided the issue's ID number. Issue identifiers have the form perl-security#NNN. Include this identifier with any subsequent messages you send. The security team will send periodic updates about the status of your issue and guide you through any further action that is required to complete the vulnerability remediation process. The stages vulnerabilities typically go through are explained in the L</HOW WE DEAL WITH SECURITY ISSUES> section. =head1 WHAT ARE SECURITY ISSUES A vulnerability is a behavior of a software system that compromises the system's expected confidentiality, integrity or availability protections. A security issue is a bug in one or more specific components of a software system that creates a vulnerability. Software written in the Perl programming language is typically composed of many layers of software written by many different groups. It can be very complicated to determine which specific layer of a complex real-world application was responsible for preventing a vulnerable behavior, but this is an essential part of fixing the vulnerability. =head2 Software covered by the Perl security team The Perl security team handles security issues in: =over =item * The Perl interpreter =item * The Perl modules shipped with the interpreter that are developed in the core Perl repository =item * The command line tools shipped with the interpreter that are developed in the core Perl repository =back Files under the F<cpan/> directory in Perl's repository and release tarballs are developed and maintained independently. The Perl security team does not handle security issues for these modules. =head2 Bugs that may qualify as security issues in Perl Perl is designed to be a fast and flexible general purpose programming language. The Perl interpreter and Perl modules make writing safe and secure applications easy, but they do have limitations. As a general rule, a bug in Perl needs to meet all of the following criteria to be considered a security issue: =over =item * The vulnerable behavior is not mentioned in Perl's documentation or public issue tracker. =item * The vulnerable behavior is not implied by an expected behavior. =item * The vulnerable behavior is not a generally accepted limitation of the implementation. =item * The vulnerable behavior is likely to be exposed to attack in otherwise secure applications written in Perl. =item * The vulnerable behavior provides a specific tangible benefit to an attacker that triggers the behavior. =back =head2 Bugs that do not qualify as security issues in Perl There are certain categories of bugs that are frequently reported to the security team that do not meet the criteria listed above. The following is a list of commonly reported bugs that are not handled as security issues. =head3 Feeding untrusted code to the interpreter The Perl parser is not designed to evaluate untrusted code. If your application requires the evaluation of untrusted code, it should rely on an operating system level sandbox for its security. =head3 Stack overflows due to excessive recursion Excessive recursion is often caused by code that does not enforce limits on inputs. The Perl interpreter assumes limits on recursion will be enforced by the application. =head3 Out of memory errors Common Perl constructs such as C<pack>, the C<x> operator, and regular expressions accept numeric quantifiers that control how much memory will be allocated to store intermediate values or results. If you allow an attacker to supply these quantifiers and consume all available memory, the Perl interpreter will not prevent it. =head3 Escape from a L<Safe> compartment L<Opcode> restrictions and L<Safe> compartments are not supported as security mechanisms. The Perl parser is not designed to evaluate untrusted code. =head3 Use of the C<p> and C<P> pack templates These templates are unsafe by design. =head3 Stack not reference-counted issues These bugs typically present as use-after-free errors or as assertion failures on the type of a C<SV>. Stack not reference-counted crashes usually occur because code is both modifying a reference or glob and using the values referenced by that glob or reference. This type of bug is a long standing issue with the Perl interpreter that seldom occurs in normal code. Examples of this type of bug generally assume that attacker-supplied code will be evaluated by the Perl interpreter. =head3 Thawing attacker-supplied data with L<Storable> L<Storable> is designed to be a very fast serialization format. It is not designed to be safe for deserializing untrusted inputs. =head3 Using attacker supplied L<SDBM_File> databases The L<SDBM_File> module is not intended for use with untrusted SDBM databases. =head3 Badly encoded UTF-8 flagged scalars This type of bug occurs when the C<:utf8> PerlIO layer is used to read badly encoded data, or other mechanisms are used to directly manipulate the UTF-8 flag on an SV. A badly encoded UTF-8 flagged SV is not a valid SV. Code that creates SV's in this fashion is corrupting Perl's internal state. =head3 Issues that exist only in blead, or in a release candidate The blead branch and Perl release candidates do not receive security support. Security defects that are present only in pre-release versions of Perl are handled through the normal bug reporting and resolution process. =head3 CPAN modules or other Perl project resources The Perl security team is focused on the Perl interpreter and modules maintained in the core Perl codebase. The team has no special access to fix CPAN modules, applications written in Perl, Perl project websites, Perl mailing lists or the Perl IRC servers. =head3 Emulated POSIX behaviors on Windows systems The Perl interpreter attempts to emulate C<fork>, C<system>, C<exec> and other POSIX behaviors on Windows systems. This emulation has many quirks that are extensively documented in Perl's public issue tracker. Changing these behaviors would cause significant disruption for existing users on Windows. =head2 Bugs that require special categorization Some bugs in the Perl interpreter occur in areas of the codebase that are both security sensitive and prone to failure during normal usage. =head3 Regular expressions Untrusted regular expressions are generally safe to compile and match against with several caveats. The following behaviors of Perl's regular expression engine are the developer's responsibility to constrain. The evaluation of untrusted regular expressions while C<use re 'eval';> is in effect is never safe. Regular expressions are not guaranteed to compile or evaluate in any specific finite time frame. Regular expressions may consume all available system memory when they are compiled or evaluated. Regular expressions may cause excessive recursion that halts the perl interpreter. As a general rule, do not expect Perl's regular expression engine to be resistant to denial of service attacks. =head3 L<DB_File>, L<ODBM_File>, or L<GDBM_File> databases These modules rely on external libraries to interact with database files. Bugs caused by reading and writing these file formats are generally caused by the underlying library implementation and are not security issues in Perl. Bugs where Perl mishandles unexpected valid return values from the underlying libraries may qualify as security issues in Perl. =head3 Algorithmic complexity attacks The perl interpreter is reasonably robust to algorithmic complexity attacks. It is not immune to them. Algorithmic complexity bugs that depend on the interpreter processing extremely large amounts of attacker supplied data are not generally handled as security issues. See L<perlsec/Algorithmic Complexity Attacks> for additional information. =head1 HOW WE DEAL WITH SECURITY ISSUES The Perl security team follows responsible disclosure practices. Security issues are kept secret until a fix is readily available for most users. This minimizes inherent risks users face from vulnerabilities in Perl. Hiding problems from the users temporarily is a necessary trade-off to keep them safe. Hiding problems from users permanently is not the goal. When you report a security issue privately to the L<perl-security@perl.org|mailto:perl-security@perl.org> contact address, we normally expect you to follow responsible disclosure practices in the handling of the report. If you are unable or unwilling to keep the issue secret until a fix is available to users you should state this clearly in the initial report. The security team's vulnerability remediation workflow is intended to be as open and transparent as possible about the state of your security report. =head2 Perl's vulnerability remediation workflow =head3 Initial contact New vulnerability reports will receive an initial reply within 72 hours from the time they arrive at the security team's mailing list. If you do not receive any response in that time, contact the security team lead L<John Lightsey|mailto:john@04755.net> and the the L<Perl steering council|mailto:steering-council@perl.org>. The initial response sent by the security team will confirm your message was received and provide an estimated time frame for the security team's triage analysis. =head3 Initial triage The security team will evaluate the report and determine whether or not it is likely to meet the criteria for handling as a security issue. The security team aims to complete the initial report triage within two weeks' time. Complex issues that require significant discussion or research may take longer. If the security report cannot be reproduced or does not meet the team's criteria for handling as a security issue, you will be notified by email and given an opportunity to respond. =head3 Issue ID assignment Security reports that pass initial triage analysis are turned into issues in the security team's private issue tracker. When a report progresses to this point you will be provided the issue ID for future reference. These identifiers have the format perl-security#NNN or Perl/perl-security#NNN. The assignment of an issue ID does not confirm that a security report represents a vulnerability in Perl. Many reports require further analysis to reach that determination. Issues in the security team's private tracker are used to collect details about the problem and track progress towards a resolution. These notes and other details are not made public when the issue is resolved. Keeping the issue notes private allows the security team to freely discuss attack methods, attack tools, and other related private issues. =head3 Development of patches Members of the security team will inspect the report and related code in detail to produce fixes for supported versions of Perl. If the team discovers that the reported issue does not meet the team's criteria at this stage, you will be notified by email and given an opportunity to respond before the issue is closed. The team may discuss potential fixes with you or provide you with patches for testing purposes during this time frame. No information should be shared publicly at this stage. =head3 CVE ID assignment Once an issue is fully confirmed and a potential fix has been found, the security team will request a CVE identifier for the issue to use in public announcements. Details like the range of vulnerable Perl versions and identities of the people that discovered the flaw need to be collected to submit the CVE ID request. The security team may ask you to clarify the exact name we should use when crediting discovery of the issue. The L</Vulnerability credit and bounties> section of this document explains our preferred format for this credit. Once a CVE ID has been assigned, you will be notified by email. The vulnerability should not be discussed publicly at this stage. =head3 Pre-release notifications When the security team is satisfied that the fix for a security issue is ready to release publicly, a pre-release notification announcement is sent to the major redistributors of Perl. This pre-release announcement includes a list of Perl versions that are affected by the flaw, an analysis of the risks to users, patches the security team has produced, and any information about mitigations or backporting fixes to older versions of Perl that the security team has available. The pre-release announcement will include a specific target date when the issue will be announced publicly. The time frame between the pre-release announcement and the release date allows redistributors to prepare and test their own updates and announcements. During this period the vulnerability details and fixes are embargoed and should not be shared publicly. This embargo period may be extended further if problems are discovered during testing. You will be sent the portions of pre-release announcements that are relevant to the specific issue you reported. This email will include the target release date. Additional updates will be sent if the target release date changes. =head3 Pre-release testing The Perl security team does not directly produce official Perl releases. The team releases security fixes by placing commits in Perl's public git repository and sending announcements. Many users and redistributors prefer using official Perl releases rather than applying patches to an older release. The security team works with Perl's release managers to make this possible. New official releases of Perl are generally produced and tested on private systems during the pre-release embargo period. =head3 Release of fixes and announcements At the end of the embargo period the security fixes will be committed to Perl's public git repository and announcements will be sent to the L<perl5-porters|https://lists.perl.org/list/perl5-porters.html> and L<oss-security|https://oss-security.openwall.org/wiki/mailing-lists/oss-security> mailing lists. If official Perl releases are ready, they will be published at this time and announced on the L<perl5-porters|https://lists.perl.org/list/perl5-porters.html> mailing list. The security team will send a follow-up notification to everyone that participated in the pre-release embargo period once the release process is finished. Vulnerability reporters and Perl redistributors should not publish their own announcements or fixes until the Perl security team's release process is complete. =head2 Publicly known and zero-day security issues The security team's vulnerability remediation workflow assumes that issues are reported privately and kept secret until they are resolved. This isn't always the case and information occasionally leaks out before a fix is ready. In these situations the team must decide whether operating in secret increases or decreases the risk to users of Perl. In some cases being open about the risk a security issue creates will allow users to defend against it, in other cases calling attention to an unresolved security issue will make it more likely to be misused. =head3 Zero-day security issues If an unresolved critical security issue in Perl is being actively abused to attack systems the security team will send out announcements as rapidly as possible with any mitigations the team has available. Perl's public defect tracker will be used to handle the issue so that additional information, fixes, and CVE IDs are visible to affected users as rapidly as possible. =head3 Other leaks of security issue information Depending on the prominence of the information revealed about a security issue and the issue's risk of becoming a zero-day attack, the security team may skip all or part of its normal remediation workflow. If the security team learns of a significant security issue after it has been identified and resolved in Perl's public issue tracker, the team will request a CVE ID and send an announcement to inform users. =head2 Vulnerability credit and bounties The Perl project appreciates the effort security researchers invest in making Perl safe and secure. Since much of this work is hidden from the public, crediting researchers publicly is an important part of the vulnerability remediation process. =head3 Credits in vulnerability announcements When security issues are fixed we will attempt to credit the specific researcher(s) that discovered the flaw in our announcements. Credits are announced using the researcher's preferred full name. If the researcher's contributions were funded by a specific company or part of an organized vulnerability research project, we will include a short name for this group at the researcher's request. Perl's announcements are written in the English language using the 7bit ASCII character set to be reproducible in a variety of formats. We do not include hyperlinks, domain names or marketing material with these acknowledgments. In the event that proper credit for vulnerability discovery cannot be established or there is a disagreement between the Perl security team and the researcher about how the credit should be given, it will be omitted from announcements. =head3 Bounties for Perl vulnerabilities The Perl project is a non-profit volunteer effort. We do not provide any monetary rewards for reporting security issues in Perl. The L<Internet Bug Bounty|https://internetbugbounty.org/> offers monetary rewards for some Perl security issues after they are fully resolved. The terms of this program are available at L<HackerOne|https://hackerone.com/ibb-perl>. This program is not run by the Perl project or the Perl security team. =cut perl5162delta.pod 0000644 00000007012 15125556335 0007554 0 ustar 00 =encoding utf8 =head1 NAME perl5162delta - what is new for perl v5.16.2 =head1 DESCRIPTION This document describes differences between the 5.16.1 release and the 5.16.2 release. If you are upgrading from an earlier release such as 5.16.0, first read L<perl5161delta>, which describes differences between 5.16.0 and 5.16.1. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.16.0 If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Module::CoreList> has been upgraded from version 2.70 to version 2.76. =back =head1 Configuration and Compilation =over 4 =item * configuration should no longer be confused by ls colorization =back =head1 Platform Support =head2 Platform-Specific Notes =over 4 =item AIX Configure now always adds -qlanglvl=extc99 to the CC flags on AIX when using xlC. This will make it easier to compile a number of XS-based modules that assume C99 [perl #113778]. =back =head1 Selected Bug Fixes =over 4 =item * fix /\h/ equivalence with /[\h]/ see [perl #114220] =back =head1 Known Problems There are no new known problems. =head1 Acknowledgements Perl 5.16.2 represents approximately 2 months of development since Perl 5.16.1 and contains approximately 740 lines of changes across 20 files from 9 authors. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.16.2: Andy Dougherty, Craig A. Berry, Darin McBride, Dominic Hargreaves, Karen Etheridge, Karl Williamson, Peter Martini, Ricardo Signes, Tony Cook. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlport.pod 0000644 00000255165 15125556335 0007147 0 ustar 00 =head1 NAME perlport - Writing portable Perl =head1 DESCRIPTION Perl runs on numerous operating systems. While most of them share much in common, they also have their own unique features. This document is meant to help you to find out what constitutes portable Perl code. That way once you make a decision to write portably, you know where the lines are drawn, and you can stay within them. There is a tradeoff between taking full advantage of one particular type of computer and taking advantage of a full range of them. Naturally, as you broaden your range and become more diverse, the common factors drop, and you are left with an increasingly smaller area of common ground in which you can operate to accomplish a particular task. Thus, when you begin attacking a problem, it is important to consider under which part of the tradeoff curve you want to operate. Specifically, you must decide whether it is important that the task that you are coding has the full generality of being portable, or whether to just get the job done right now. This is the hardest choice to be made. The rest is easy, because Perl provides many choices, whichever way you want to approach your problem. Looking at it another way, writing portable code is usually about willfully limiting your available choices. Naturally, it takes discipline and sacrifice to do that. The product of portability and convenience may be a constant. You have been warned. Be aware of two important points: =over 4 =item Not all Perl programs have to be portable There is no reason you should not use Perl as a language to glue Unix tools together, or to prototype a Macintosh application, or to manage the Windows registry. If it makes no sense to aim for portability for one reason or another in a given program, then don't bother. =item Nearly all of Perl already I<is> portable Don't be fooled into thinking that it is hard to create portable Perl code. It isn't. Perl tries its level-best to bridge the gaps between what's available on different platforms, and all the means available to use those features. Thus almost all Perl code runs on any machine without modification. But there are some significant issues in writing portable code, and this document is entirely about those issues. =back Here's the general rule: When you approach a task commonly done using a whole range of platforms, think about writing portable code. That way, you don't sacrifice much by way of the implementation choices you can avail yourself of, and at the same time you can give your users lots of platform choices. On the other hand, when you have to take advantage of some unique feature of a particular platform, as is often the case with systems programming (whether for Unix, Windows, VMS, etc.), consider writing platform-specific code. When the code will run on only two or three operating systems, you may need to consider only the differences of those particular systems. The important thing is to decide where the code will run and to be deliberate in your decision. The material below is separated into three main sections: main issues of portability (L</"ISSUES">), platform-specific issues (L</"PLATFORMS">), and built-in Perl functions that behave differently on various ports (L</"FUNCTION IMPLEMENTATIONS">). This information should not be considered complete; it includes possibly transient information about idiosyncrasies of some of the ports, almost all of which are in a state of constant evolution. Thus, this material should be considered a perpetual work in progress (C<< <IMG SRC="yellow_sign.gif" ALT="Under Construction"> >>). =head1 ISSUES =head2 Newlines In most operating systems, lines in files are terminated by newlines. Just what is used as a newline may vary from OS to OS. Unix traditionally uses C<\012>, one type of DOSish I/O uses C<\015\012>, S<Mac OS> uses C<\015>, and z/OS uses C<\025>. Perl uses C<\n> to represent the "logical" newline, where what is logical may depend on the platform in use. In MacPerl, C<\n> always means C<\015>. On EBCDIC platforms, C<\n> could be C<\025> or C<\045>. In DOSish perls, C<\n> usually means C<\012>, but when accessing a file in "text" mode, perl uses the C<:crlf> layer that translates it to (or from) C<\015\012>, depending on whether you're reading or writing. Unix does the same thing on ttys in canonical mode. C<\015\012> is commonly referred to as CRLF. To trim trailing newlines from text lines use L<C<chomp>|perlfunc/chomp VARIABLE>. With default settings that function looks for a trailing C<\n> character and thus trims in a portable way. When dealing with binary files (or text files in binary mode) be sure to explicitly set L<C<$E<sol>>|perlvar/$E<sol>> to the appropriate value for your file format before using L<C<chomp>|perlfunc/chomp VARIABLE>. Because of the "text" mode translation, DOSish perls have limitations in using L<C<seek>|perlfunc/seek FILEHANDLE,POSITION,WHENCE> and L<C<tell>|perlfunc/tell FILEHANDLE> on a file accessed in "text" mode. Stick to L<C<seek>|perlfunc/seek FILEHANDLE,POSITION,WHENCE>-ing to locations you got from L<C<tell>|perlfunc/tell FILEHANDLE> (and no others), and you are usually free to use L<C<seek>|perlfunc/seek FILEHANDLE,POSITION,WHENCE> and L<C<tell>|perlfunc/tell FILEHANDLE> even in "text" mode. Using L<C<seek>|perlfunc/seek FILEHANDLE,POSITION,WHENCE> or L<C<tell>|perlfunc/tell FILEHANDLE> or other file operations may be non-portable. If you use L<C<binmode>|perlfunc/binmode FILEHANDLE> on a file, however, you can usually L<C<seek>|perlfunc/seek FILEHANDLE,POSITION,WHENCE> and L<C<tell>|perlfunc/tell FILEHANDLE> with arbitrary values safely. A common misconception in socket programming is that S<C<\n eq \012>> everywhere. When using protocols such as common Internet protocols, C<\012> and C<\015> are called for specifically, and the values of the logical C<\n> and C<\r> (carriage return) are not reliable. print $socket "Hi there, client!\r\n"; # WRONG print $socket "Hi there, client!\015\012"; # RIGHT However, using C<\015\012> (or C<\cM\cJ>, or C<\x0D\x0A>) can be tedious and unsightly, as well as confusing to those maintaining the code. As such, the L<C<Socket>|Socket> module supplies the Right Thing for those who want it. use Socket qw(:DEFAULT :crlf); print $socket "Hi there, client!$CRLF" # RIGHT When reading from a socket, remember that the default input record separator L<C<$E<sol>>|perlvar/$E<sol>> is C<\n>, but robust socket code will recognize as either C<\012> or C<\015\012> as end of line: while (<$socket>) { # NOT ADVISABLE! # ... } Because both CRLF and LF end in LF, the input record separator can be set to LF and any CR stripped later. Better to write: use Socket qw(:DEFAULT :crlf); local($/) = LF; # not needed if $/ is already \012 while (<$socket>) { s/$CR?$LF/\n/; # not sure if socket uses LF or CRLF, OK # s/\015?\012/\n/; # same thing } This example is preferred over the previous one--even for Unix platforms--because now any C<\015>'s (C<\cM>'s) are stripped out (and there was much rejoicing). Similarly, functions that return text data--such as a function that fetches a web page--should sometimes translate newlines before returning the data, if they've not yet been translated to the local newline representation. A single line of code will often suffice: $data =~ s/\015?\012/\n/g; return $data; Some of this may be confusing. Here's a handy reference to the ASCII CR and LF characters. You can print it out and stick it in your wallet. LF eq \012 eq \x0A eq \cJ eq chr(10) eq ASCII 10 CR eq \015 eq \x0D eq \cM eq chr(13) eq ASCII 13 | Unix | DOS | Mac | --------------------------- \n | LF | LF | CR | \r | CR | CR | LF | \n * | LF | CRLF | CR | \r * | CR | CR | LF | --------------------------- * text-mode STDIO The Unix column assumes that you are not accessing a serial line (like a tty) in canonical mode. If you are, then CR on input becomes "\n", and "\n" on output becomes CRLF. These are just the most common definitions of C<\n> and C<\r> in Perl. There may well be others. For example, on an EBCDIC implementation such as z/OS (OS/390) or OS/400 (using the ILE, the PASE is ASCII-based) the above material is similar to "Unix" but the code numbers change: LF eq \025 eq \x15 eq \cU eq chr(21) eq CP-1047 21 LF eq \045 eq \x25 eq chr(37) eq CP-0037 37 CR eq \015 eq \x0D eq \cM eq chr(13) eq CP-1047 13 CR eq \015 eq \x0D eq \cM eq chr(13) eq CP-0037 13 | z/OS | OS/400 | ---------------------- \n | LF | LF | \r | CR | CR | \n * | LF | LF | \r * | CR | CR | ---------------------- * text-mode STDIO =head2 Numbers endianness and Width Different CPUs store integers and floating point numbers in different orders (called I<endianness>) and widths (32-bit and 64-bit being the most common today). This affects your programs when they attempt to transfer numbers in binary format from one CPU architecture to another, usually either "live" via network connection, or by storing the numbers to secondary storage such as a disk file or tape. Conflicting storage orders make an utter mess out of the numbers. If a little-endian host (Intel, VAX) stores 0x12345678 (305419896 in decimal), a big-endian host (Motorola, Sparc, PA) reads it as 0x78563412 (2018915346 in decimal). Alpha and MIPS can be either: Digital/Compaq used/uses them in little-endian mode; SGI/Cray uses them in big-endian mode. To avoid this problem in network (socket) connections use the L<C<pack>|perlfunc/pack TEMPLATE,LIST> and L<C<unpack>|perlfunc/unpack TEMPLATE,EXPR> formats C<n> and C<N>, the "network" orders. These are guaranteed to be portable. As of Perl 5.10.0, you can also use the C<E<gt>> and C<E<lt>> modifiers to force big- or little-endian byte-order. This is useful if you want to store signed integers or 64-bit integers, for example. You can explore the endianness of your platform by unpacking a data structure packed in native format such as: print unpack("h*", pack("s2", 1, 2)), "\n"; # '10002000' on e.g. Intel x86 or Alpha 21064 in little-endian mode # '00100020' on e.g. Motorola 68040 If you need to distinguish between endian architectures you could use either of the variables set like so: $is_big_endian = unpack("h*", pack("s", 1)) =~ /01/; $is_little_endian = unpack("h*", pack("s", 1)) =~ /^1/; Differing widths can cause truncation even between platforms of equal endianness. The platform of shorter width loses the upper parts of the number. There is no good solution for this problem except to avoid transferring or storing raw binary numbers. One can circumnavigate both these problems in two ways. Either transfer and store numbers always in text format, instead of raw binary, or else consider using modules like L<C<Data::Dumper>|Data::Dumper> and L<C<Storable>|Storable> (included as of Perl 5.8). Keeping all data as text significantly simplifies matters. =head2 Files and Filesystems Most platforms these days structure files in a hierarchical fashion. So, it is reasonably safe to assume that all platforms support the notion of a "path" to uniquely identify a file on the system. How that path is really written, though, differs considerably. Although similar, file path specifications differ between Unix, Windows, S<Mac OS>, OS/2, VMS, VOS, S<RISC OS>, and probably others. Unix, for example, is one of the few OSes that has the elegant idea of a single root directory. DOS, OS/2, VMS, VOS, and Windows can work similarly to Unix with C</> as path separator, or in their own idiosyncratic ways (such as having several root directories and various "unrooted" device files such NIL: and LPT:). S<Mac OS> 9 and earlier used C<:> as a path separator instead of C</>. The filesystem may support neither hard links (L<C<link>|perlfunc/link OLDFILE,NEWFILE>) nor symbolic links (L<C<symlink>|perlfunc/symlink OLDFILE,NEWFILE>, L<C<readlink>|perlfunc/readlink EXPR>, L<C<lstat>|perlfunc/lstat FILEHANDLE>). The filesystem may support neither access timestamp nor change timestamp (meaning that about the only portable timestamp is the modification timestamp), or one second granularity of any timestamps (e.g. the FAT filesystem limits the time granularity to two seconds). The "inode change timestamp" (the L<C<-C>|perlfunc/-X FILEHANDLE> filetest) may really be the "creation timestamp" (which it is not in Unix). VOS perl can emulate Unix filenames with C</> as path separator. The native pathname characters greater-than, less-than, number-sign, and percent-sign are always accepted. S<RISC OS> perl can emulate Unix filenames with C</> as path separator, or go native and use C<.> for path separator and C<:> to signal filesystems and disk names. Don't assume Unix filesystem access semantics: that read, write, and execute are all the permissions there are, and even if they exist, that their semantics (for example what do C<r>, C<w>, and C<x> mean on a directory) are the Unix ones. The various Unix/POSIX compatibility layers usually try to make interfaces like L<C<chmod>|perlfunc/chmod LIST> work, but sometimes there simply is no good mapping. The L<C<File::Spec>|File::Spec> modules provide methods to manipulate path specifications and return the results in native format for each platform. This is often unnecessary as Unix-style paths are understood by Perl on every supported platform, but if you need to produce native paths for a native utility that does not understand Unix syntax, or if you are operating on paths or path components in unknown (and thus possibly native) syntax, L<C<File::Spec>|File::Spec> is your friend. Here are two brief examples: use File::Spec::Functions; chdir(updir()); # go up one directory # Concatenate a path from its components my $file = catfile(updir(), 'temp', 'file.txt'); # on Unix: '../temp/file.txt' # on Win32: '..\temp\file.txt' # on VMS: '[-.temp]file.txt' In general, production code should not have file paths hardcoded. Making them user-supplied or read from a configuration file is better, keeping in mind that file path syntax varies on different machines. This is especially noticeable in scripts like Makefiles and test suites, which often assume C</> as a path separator for subdirectories. Also of use is L<C<File::Basename>|File::Basename> from the standard distribution, which splits a pathname into pieces (base filename, full path to directory, and file suffix). Even when on a single platform (if you can call Unix a single platform), remember not to count on the existence or the contents of particular system-specific files or directories, like F</etc/passwd>, F</etc/sendmail.conf>, F</etc/resolv.conf>, or even F</tmp/>. For example, F</etc/passwd> may exist but not contain the encrypted passwords, because the system is using some form of enhanced security. Or it may not contain all the accounts, because the system is using NIS. If code does need to rely on such a file, include a description of the file and its format in the code's documentation, then make it easy for the user to override the default location of the file. Don't assume a text file will end with a newline. They should, but people forget. Do not have two files or directories of the same name with different case, like F<test.pl> and F<Test.pl>, as many platforms have case-insensitive (or at least case-forgiving) filenames. Also, try not to have non-word characters (except for C<.>) in the names, and keep them to the 8.3 convention, for maximum portability, onerous a burden though this may appear. Likewise, when using the L<C<AutoSplit>|AutoSplit> module, try to keep your functions to 8.3 naming and case-insensitive conventions; or, at the least, make it so the resulting files have a unique (case-insensitively) first 8 characters. Whitespace in filenames is tolerated on most systems, but not all, and even on systems where it might be tolerated, some utilities might become confused by such whitespace. Many systems (DOS, VMS ODS-2) cannot have more than one C<.> in their filenames. Don't assume C<< > >> won't be the first character of a filename. Always use the three-arg version of L<C<open>|perlfunc/open FILEHANDLE,MODE,EXPR>: open my $fh, '<', $existing_file) or die $!; Two-arg L<C<open>|perlfunc/open FILEHANDLE,MODE,EXPR> is magic and can translate characters like C<< > >>, C<< < >>, and C<|> in filenames, which is usually the wrong thing to do. L<C<sysopen>|perlfunc/sysopen FILEHANDLE,FILENAME,MODE> and three-arg L<C<open>|perlfunc/open FILEHANDLE,MODE,EXPR> don't have this problem. Don't use C<:> as a part of a filename since many systems use that for their own semantics (Mac OS Classic for separating pathname components, many networking schemes and utilities for separating the nodename and the pathname, and so on). For the same reasons, avoid C<@>, C<;> and C<|>. Don't assume that in pathnames you can collapse two leading slashes C<//> into one: some networking and clustering filesystems have special semantics for that. Let the operating system sort it out. The I<portable filename characters> as defined by ANSI C are a b c d e f g h i j k l m n o p q r s t u v w x y z A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 . _ - and C<-> shouldn't be the first character. If you want to be hypercorrect, stay case-insensitive and within the 8.3 naming convention (all the files and directories have to be unique within one directory if their names are lowercased and truncated to eight characters before the C<.>, if any, and to three characters after the C<.>, if any). (And do not use C<.>s in directory names.) =head2 System Interaction Not all platforms provide a command line. These are usually platforms that rely primarily on a Graphical User Interface (GUI) for user interaction. A program requiring a command line interface might not work everywhere. This is probably for the user of the program to deal with, so don't stay up late worrying about it. Some platforms can't delete or rename files held open by the system, this limitation may also apply to changing filesystem metainformation like file permissions or owners. Remember to L<C<close>|perlfunc/close FILEHANDLE> files when you are done with them. Don't L<C<unlink>|perlfunc/unlink LIST> or L<C<rename>|perlfunc/rename OLDNAME,NEWNAME> an open file. Don't L<C<tie>|perlfunc/tie VARIABLE,CLASSNAME,LIST> or L<C<open>|perlfunc/open FILEHANDLE,MODE,EXPR> a file already tied or opened; L<C<untie>|perlfunc/untie VARIABLE> or L<C<close>|perlfunc/close FILEHANDLE> it first. Don't open the same file more than once at a time for writing, as some operating systems put mandatory locks on such files. Don't assume that write/modify permission on a directory gives the right to add or delete files/directories in that directory. That is filesystem specific: in some filesystems you need write/modify permission also (or even just) in the file/directory itself. In some filesystems (AFS, DFS) the permission to add/delete directory entries is a completely separate permission. Don't assume that a single L<C<unlink>|perlfunc/unlink LIST> completely gets rid of the file: some filesystems (most notably the ones in VMS) have versioned filesystems, and L<C<unlink>|perlfunc/unlink LIST> removes only the most recent one (it doesn't remove all the versions because by default the native tools on those platforms remove just the most recent version, too). The portable idiom to remove all the versions of a file is 1 while unlink "file"; This will terminate if the file is undeletable for some reason (protected, not there, and so on). Don't count on a specific environment variable existing in L<C<%ENV>|perlvar/%ENV>. Don't count on L<C<%ENV>|perlvar/%ENV> entries being case-sensitive, or even case-preserving. Don't try to clear L<C<%ENV>|perlvar/%ENV> by saying C<%ENV = ();>, or, if you really have to, make it conditional on C<$^O ne 'VMS'> since in VMS the L<C<%ENV>|perlvar/%ENV> table is much more than a per-process key-value string table. On VMS, some entries in the L<C<%ENV>|perlvar/%ENV> hash are dynamically created when their key is used on a read if they did not previously exist. The values for C<$ENV{HOME}>, C<$ENV{TERM}>, C<$ENV{PATH}>, and C<$ENV{USER}>, are known to be dynamically generated. The specific names that are dynamically generated may vary with the version of the C library on VMS, and more may exist than are documented. On VMS by default, changes to the L<C<%ENV>|perlvar/%ENV> hash persist after perl exits. Subsequent invocations of perl in the same process can inadvertently inherit environment settings that were meant to be temporary. Don't count on signals or L<C<%SIG>|perlvar/%SIG> for anything. Don't count on filename globbing. Use L<C<opendir>|perlfunc/opendir DIRHANDLE,EXPR>, L<C<readdir>|perlfunc/readdir DIRHANDLE>, and L<C<closedir>|perlfunc/closedir DIRHANDLE> instead. Don't count on per-program environment variables, or per-program current directories. Don't count on specific values of L<C<$!>|perlvar/$!>, neither numeric nor especially the string values. Users may switch their locales causing error messages to be translated into their languages. If you can trust a POSIXish environment, you can portably use the symbols defined by the L<C<Errno>|Errno> module, like C<ENOENT>. And don't trust on the values of L<C<$!>|perlvar/$!> at all except immediately after a failed system call. =head2 Command names versus file pathnames Don't assume that the name used to invoke a command or program with L<C<system>|perlfunc/system LIST> or L<C<exec>|perlfunc/exec LIST> can also be used to test for the existence of the file that holds the executable code for that command or program. First, many systems have "internal" commands that are built-in to the shell or OS and while these commands can be invoked, there is no corresponding file. Second, some operating systems (e.g., Cygwin, DJGPP, OS/2, and VOS) have required suffixes for executable files; these suffixes are generally permitted on the command name but are not required. Thus, a command like C<perl> might exist in a file named F<perl>, F<perl.exe>, or F<perl.pm>, depending on the operating system. The variable L<C<$Config{_exe}>|Config/C<_exe>> in the L<C<Config>|Config> module holds the executable suffix, if any. Third, the VMS port carefully sets up L<C<$^X>|perlvar/$^X> and L<C<$Config{perlpath}>|Config/C<perlpath>> so that no further processing is required. This is just as well, because the matching regular expression used below would then have to deal with a possible trailing version number in the VMS file name. To convert L<C<$^X>|perlvar/$^X> to a file pathname, taking account of the requirements of the various operating system possibilities, say: use Config; my $thisperl = $^X; if ($^O ne 'VMS') { $thisperl .= $Config{_exe} unless $thisperl =~ m/\Q$Config{_exe}\E$/i; } To convert L<C<$Config{perlpath}>|Config/C<perlpath>> to a file pathname, say: use Config; my $thisperl = $Config{perlpath}; if ($^O ne 'VMS') { $thisperl .= $Config{_exe} unless $thisperl =~ m/\Q$Config{_exe}\E$/i; } =head2 Networking Don't assume that you can reach the public Internet. Don't assume that there is only one way to get through firewalls to the public Internet. Don't assume that you can reach outside world through any other port than 80, or some web proxy. ftp is blocked by many firewalls. Don't assume that you can send email by connecting to the local SMTP port. Don't assume that you can reach yourself or any node by the name 'localhost'. The same goes for '127.0.0.1'. You will have to try both. Don't assume that the host has only one network card, or that it can't bind to many virtual IP addresses. Don't assume a particular network device name. Don't assume a particular set of L<C<ioctl>|perlfunc/ioctl FILEHANDLE,FUNCTION,SCALAR>s will work. Don't assume that you can ping hosts and get replies. Don't assume that any particular port (service) will respond. Don't assume that L<C<Sys::Hostname>|Sys::Hostname> (or any other API or command) returns either a fully qualified hostname or a non-qualified hostname: it all depends on how the system had been configured. Also remember that for things such as DHCP and NAT, the hostname you get back might not be very useful. All the above I<don't>s may look daunting, and they are, but the key is to degrade gracefully if one cannot reach the particular network service one wants. Croaking or hanging do not look very professional. =head2 Interprocess Communication (IPC) In general, don't directly access the system in code meant to be portable. That means, no L<C<system>|perlfunc/system LIST>, L<C<exec>|perlfunc/exec LIST>, L<C<fork>|perlfunc/fork>, L<C<pipe>|perlfunc/pipe READHANDLE,WRITEHANDLE>, L<C<``> or C<qxE<sol>E<sol>>|perlop/C<qxE<sol>I<STRING>E<sol>>>, L<C<open>|perlfunc/open FILEHANDLE,MODE,EXPR> with a C<|>, nor any of the other things that makes being a Perl hacker worth being. Commands that launch external processes are generally supported on most platforms (though many of them do not support any type of forking). The problem with using them arises from what you invoke them on. External tools are often named differently on different platforms, may not be available in the same location, might accept different arguments, can behave differently, and often present their results in a platform-dependent way. Thus, you should seldom depend on them to produce consistent results. (Then again, if you're calling C<netstat -a>, you probably don't expect it to run on both Unix and CP/M.) One especially common bit of Perl code is opening a pipe to B<sendmail>: open(my $mail, '|-', '/usr/lib/sendmail -t') or die "cannot fork sendmail: $!"; This is fine for systems programming when sendmail is known to be available. But it is not fine for many non-Unix systems, and even some Unix systems that may not have sendmail installed. If a portable solution is needed, see the various distributions on CPAN that deal with it. L<C<Mail::Mailer>|Mail::Mailer> and L<C<Mail::Send>|Mail::Send> in the C<MailTools> distribution are commonly used, and provide several mailing methods, including C<mail>, C<sendmail>, and direct SMTP (via L<C<Net::SMTP>|Net::SMTP>) if a mail transfer agent is not available. L<C<Mail::Sendmail>|Mail::Sendmail> is a standalone module that provides simple, platform-independent mailing. The Unix System V IPC (C<msg*(), sem*(), shm*()>) is not available even on all Unix platforms. Do not use either the bare result of C<pack("N", 10, 20, 30, 40)> or bare v-strings (such as C<v10.20.30.40>) to represent IPv4 addresses: both forms just pack the four bytes into network order. That this would be equal to the C language C<in_addr> struct (which is what the socket code internally uses) is not guaranteed. To be portable use the routines of the L<C<Socket>|Socket> module, such as L<C<inet_aton>|Socket/$ip_address = inet_aton $string>, L<C<inet_ntoa>|Socket/$string = inet_ntoa $ip_address>, and L<C<sockaddr_in>|Socket/$sockaddr = sockaddr_in $port, $ip_address>. The rule of thumb for portable code is: Do it all in portable Perl, or use a module (that may internally implement it with platform-specific code, but exposes a common interface). =head2 External Subroutines (XS) XS code can usually be made to work with any platform, but dependent libraries, header files, etc., might not be readily available or portable, or the XS code itself might be platform-specific, just as Perl code might be. If the libraries and headers are portable, then it is normally reasonable to make sure the XS code is portable, too. A different type of portability issue arises when writing XS code: availability of a C compiler on the end-user's system. C brings with it its own portability issues, and writing XS code will expose you to some of those. Writing purely in Perl is an easier way to achieve portability. =head2 Standard Modules In general, the standard modules work across platforms. Notable exceptions are the L<C<CPAN>|CPAN> module (which currently makes connections to external programs that may not be available), platform-specific modules (like L<C<ExtUtils::MM_VMS>|ExtUtils::MM_VMS>), and DBM modules. There is no one DBM module available on all platforms. L<C<SDBM_File>|SDBM_File> and the others are generally available on all Unix and DOSish ports, but not in MacPerl, where only L<C<NDBM_File>|NDBM_File> and L<C<DB_File>|DB_File> are available. The good news is that at least some DBM module should be available, and L<C<AnyDBM_File>|AnyDBM_File> will use whichever module it can find. Of course, then the code needs to be fairly strict, dropping to the greatest common factor (e.g., not exceeding 1K for each record), so that it will work with any DBM module. See L<AnyDBM_File> for more details. =head2 Time and Date The system's notion of time of day and calendar date is controlled in widely different ways. Don't assume the timezone is stored in C<$ENV{TZ}>, and even if it is, don't assume that you can control the timezone through that variable. Don't assume anything about the three-letter timezone abbreviations (for example that MST would be the Mountain Standard Time, it's been known to stand for Moscow Standard Time). If you need to use timezones, express them in some unambiguous format like the exact number of minutes offset from UTC, or the POSIX timezone format. Don't assume that the epoch starts at 00:00:00, January 1, 1970, because that is OS- and implementation-specific. It is better to store a date in an unambiguous representation. The ISO 8601 standard defines YYYY-MM-DD as the date format, or YYYY-MM-DDTHH:MM:SS (that's a literal "T" separating the date from the time). Please do use the ISO 8601 instead of making us guess what date 02/03/04 might be. ISO 8601 even sorts nicely as-is. A text representation (like "1987-12-18") can be easily converted into an OS-specific value using a module like L<C<Time::Piece>|Time::Piece> (see L<Time::Piece/Date Parsing>) or L<C<Date::Parse>|Date::Parse>. An array of values, such as those returned by L<C<localtime>|perlfunc/localtime EXPR>, can be converted to an OS-specific representation using L<C<Time::Local>|Time::Local>. When calculating specific times, such as for tests in time or date modules, it may be appropriate to calculate an offset for the epoch. use Time::Local qw(timegm); my $offset = timegm(0, 0, 0, 1, 0, 1970); The value for C<$offset> in Unix will be C<0>, but in Mac OS Classic will be some large number. C<$offset> can then be added to a Unix time value to get what should be the proper value on any system. =head2 Character sets and character encoding Assume very little about character sets. Assume nothing about numerical values (L<C<ord>|perlfunc/ord EXPR>, L<C<chr>|perlfunc/chr NUMBER>) of characters. Do not use explicit code point ranges (like C<\xHH-\xHH)>. However, starting in Perl v5.22, regular expression pattern bracketed character class ranges specified like C<qr/[\N{U+HH}-\N{U+HH}]/> are portable, and starting in Perl v5.24, the same ranges are portable in L<C<trE<sol>E<sol>E<sol>>|perlop/C<trE<sol>I<SEARCHLIST>E<sol>I<REPLACEMENTLIST>E<sol>cdsr>>. You can portably use symbolic character classes like C<[:print:]>. Do not assume that the alphabetic characters are encoded contiguously (in the numeric sense). There may be gaps. Special coding in Perl, however, guarantees that all subsets of C<qr/[A-Z]/>, C<qr/[a-z]/>, and C<qr/[0-9]/> behave as expected. L<C<trE<sol>E<sol>E<sol>>|perlop/C<trE<sol>I<SEARCHLIST>E<sol>I<REPLACEMENTLIST>E<sol>cdsr>> behaves the same for these ranges. In patterns, any ranges specified with end points using the C<\N{...}> notations ensures character set portability, but it is a bug in Perl v5.22 that this isn't true of L<C<trE<sol>E<sol>E<sol>>|perlop/C<trE<sol>I<SEARCHLIST>E<sol>I<REPLACEMENTLIST>E<sol>cdsr>>, fixed in v5.24. Do not assume anything about the ordering of the characters. The lowercase letters may come before or after the uppercase letters; the lowercase and uppercase may be interlaced so that both "a" and "A" come before "b"; the accented and other international characters may be interlaced so that E<auml> comes before "b". L<Unicode::Collate> can be used to sort this all out. =head2 Internationalisation If you may assume POSIX (a rather large assumption), you may read more about the POSIX locale system from L<perllocale>. The locale system at least attempts to make things a little bit more portable, or at least more convenient and native-friendly for non-English users. The system affects character sets and encoding, and date and time formatting--amongst other things. If you really want to be international, you should consider Unicode. See L<perluniintro> and L<perlunicode> for more information. By default Perl assumes your source code is written in an 8-bit ASCII superset. To embed Unicode characters in your strings and regexes, you can use the L<C<\x{HH}> or (more portably) C<\N{U+HH}> notations|perlop/Quote and Quote-like Operators>. You can also use the L<C<utf8>|utf8> pragma and write your code in UTF-8, which lets you use Unicode characters directly (not just in quoted constructs but also in identifiers). =head2 System Resources If your code is destined for systems with severely constrained (or missing!) virtual memory systems then you want to be I<especially> mindful of avoiding wasteful constructs such as: my @lines = <$very_large_file>; # bad while (<$fh>) {$file .= $_} # sometimes bad my $file = join('', <$fh>); # better The last two constructs may appear unintuitive to most people. The first repeatedly grows a string, whereas the second allocates a large chunk of memory in one go. On some systems, the second is more efficient than the first. =head2 Security Most multi-user platforms provide basic levels of security, usually implemented at the filesystem level. Some, however, unfortunately do not. Thus the notion of user id, or "home" directory, or even the state of being logged-in, may be unrecognizable on many platforms. If you write programs that are security-conscious, it is usually best to know what type of system you will be running under so that you can write code explicitly for that platform (or class of platforms). Don't assume the Unix filesystem access semantics: the operating system or the filesystem may be using some ACL systems, which are richer languages than the usual C<rwx>. Even if the C<rwx> exist, their semantics might be different. (From the security viewpoint, testing for permissions before attempting to do something is silly anyway: if one tries this, there is potential for race conditions. Someone or something might change the permissions between the permissions check and the actual operation. Just try the operation.) Don't assume the Unix user and group semantics: especially, don't expect L<C<< $< >>|perlvar/$E<lt>> and L<C<< $> >>|perlvar/$E<gt>> (or L<C<$(>|perlvar/$(> and L<C<$)>|perlvar/$)>) to work for switching identities (or memberships). Don't assume set-uid and set-gid semantics. (And even if you do, think twice: set-uid and set-gid are a known can of security worms.) =head2 Style For those times when it is necessary to have platform-specific code, consider keeping the platform-specific code in one place, making porting to other platforms easier. Use the L<C<Config>|Config> module and the special variable L<C<$^O>|perlvar/$^O> to differentiate platforms, as described in L</"PLATFORMS">. Beware of the "else syndrome": if ($^O eq 'MSWin32') { # code that assumes Windows } else { # code that assumes Linux } The C<else> branch should be used for the really ultimate fallback, not for code specific to some platform. Be careful in the tests you supply with your module or programs. Module code may be fully portable, but its tests might not be. This often happens when tests spawn off other processes or call external programs to aid in the testing, or when (as noted above) the tests assume certain things about the filesystem and paths. Be careful not to depend on a specific output style for errors, such as when checking L<C<$!>|perlvar/$!> after a failed system call. Using L<C<$!>|perlvar/$!> for anything else than displaying it as output is doubtful (though see the L<C<Errno>|Errno> module for testing reasonably portably for error value). Some platforms expect a certain output format, and Perl on those platforms may have been adjusted accordingly. Most specifically, don't anchor a regex when testing an error value. =head1 CPAN Testers Modules uploaded to CPAN are tested by a variety of volunteers on different platforms. These CPAN testers are notified by mail of each new upload, and reply to the list with PASS, FAIL, NA (not applicable to this platform), or UNKNOWN (unknown), along with any relevant notations. The purpose of the testing is twofold: one, to help developers fix any problems in their code that crop up because of lack of testing on other platforms; two, to provide users with information about whether a given module works on a given platform. Also see: =over 4 =item * Mailing list: cpan-testers-discuss@perl.org =item * Testing results: L<https://www.cpantesters.org/> =back =head1 PLATFORMS Perl is built with a L<C<$^O>|perlvar/$^O> variable that indicates the operating system it was built on. This was implemented to help speed up code that would otherwise have to C<use Config> and use the value of L<C<$Config{osname}>|Config/C<osname>>. Of course, to get more detailed information about the system, looking into L<C<%Config>|Config/DESCRIPTION> is certainly recommended. L<C<%Config>|Config/DESCRIPTION> cannot always be trusted, however, because it was built at compile time. If perl was built in one place, then transferred elsewhere, some values may be wrong. The values may even have been edited after the fact. =head2 Unix Perl works on a bewildering variety of Unix and Unix-like platforms (see e.g. most of the files in the F<hints/> directory in the source code kit). On most of these systems, the value of L<C<$^O>|perlvar/$^O> (hence L<C<$Config{osname}>|Config/C<osname>>, too) is determined either by lowercasing and stripping punctuation from the first field of the string returned by typing C<uname -a> (or a similar command) at the shell prompt or by testing the file system for the presence of uniquely named files such as a kernel or header file. Here, for example, are a few of the more popular Unix flavors: uname $^O $Config{archname} -------------------------------------------- AIX aix aix BSD/OS bsdos i386-bsdos Darwin darwin darwin DYNIX/ptx dynixptx i386-dynixptx FreeBSD freebsd freebsd-i386 Haiku haiku BePC-haiku Linux linux arm-linux Linux linux armv5tel-linux Linux linux i386-linux Linux linux i586-linux Linux linux ppc-linux HP-UX hpux PA-RISC1.1 IRIX irix irix Mac OS X darwin darwin NeXT 3 next next-fat NeXT 4 next OPENSTEP-Mach openbsd openbsd i386-openbsd OSF1 dec_osf alpha-dec_osf reliantunix-n svr4 RM400-svr4 SCO_SV sco_sv i386-sco_sv SINIX-N svr4 RM400-svr4 sn4609 unicos CRAY_C90-unicos sn6521 unicosmk t3e-unicosmk sn9617 unicos CRAY_J90-unicos SunOS solaris sun4-solaris SunOS solaris i86pc-solaris SunOS4 sunos sun4-sunos Because the value of L<C<$Config{archname}>|Config/C<archname>> may depend on the hardware architecture, it can vary more than the value of L<C<$^O>|perlvar/$^O>. =head2 DOS and Derivatives Perl has long been ported to Intel-style microcomputers running under systems like PC-DOS, MS-DOS, OS/2, and most Windows platforms you can bring yourself to mention (except for Windows CE, if you count that). Users familiar with I<COMMAND.COM> or I<CMD.EXE> style shells should be aware that each of these file specifications may have subtle differences: my $filespec0 = "c:/foo/bar/file.txt"; my $filespec1 = "c:\\foo\\bar\\file.txt"; my $filespec2 = 'c:\foo\bar\file.txt'; my $filespec3 = 'c:\\foo\\bar\\file.txt'; System calls accept either C</> or C<\> as the path separator. However, many command-line utilities of DOS vintage treat C</> as the option prefix, so may get confused by filenames containing C</>. Aside from calling any external programs, C</> will work just fine, and probably better, as it is more consistent with popular usage, and avoids the problem of remembering what to backwhack and what not to. The DOS FAT filesystem can accommodate only "8.3" style filenames. Under the "case-insensitive, but case-preserving" HPFS (OS/2) and NTFS (NT) filesystems you may have to be careful about case returned with functions like L<C<readdir>|perlfunc/readdir DIRHANDLE> or used with functions like L<C<open>|perlfunc/open FILEHANDLE,MODE,EXPR> or L<C<opendir>|perlfunc/opendir DIRHANDLE,EXPR>. DOS also treats several filenames as special, such as F<AUX>, F<PRN>, F<NUL>, F<CON>, F<COM1>, F<LPT1>, F<LPT2>, etc. Unfortunately, sometimes these filenames won't even work if you include an explicit directory prefix. It is best to avoid such filenames, if you want your code to be portable to DOS and its derivatives. It's hard to know what these all are, unfortunately. Users of these operating systems may also wish to make use of scripts such as F<pl2bat.bat> to put wrappers around your scripts. Newline (C<\n>) is translated as C<\015\012> by the I/O system when reading from and writing to files (see L</"Newlines">). C<binmode($filehandle)> will keep C<\n> translated as C<\012> for that filehandle. L<C<binmode>|perlfunc/binmode FILEHANDLE> should always be used for code that deals with binary data. That's assuming you realize in advance that your data is in binary. General-purpose programs should often assume nothing about their data. The L<C<$^O>|perlvar/$^O> variable and the L<C<$Config{archname}>|Config/C<archname>> values for various DOSish perls are as follows: OS $^O $Config{archname} ID Version --------------------------------------------------------- MS-DOS dos ? PC-DOS dos ? OS/2 os2 ? Windows 3.1 ? ? 0 3 01 Windows 95 MSWin32 MSWin32-x86 1 4 00 Windows 98 MSWin32 MSWin32-x86 1 4 10 Windows ME MSWin32 MSWin32-x86 1 ? Windows NT MSWin32 MSWin32-x86 2 4 xx Windows NT MSWin32 MSWin32-ALPHA 2 4 xx Windows NT MSWin32 MSWin32-ppc 2 4 xx Windows 2000 MSWin32 MSWin32-x86 2 5 00 Windows XP MSWin32 MSWin32-x86 2 5 01 Windows 2003 MSWin32 MSWin32-x86 2 5 02 Windows Vista MSWin32 MSWin32-x86 2 6 00 Windows 7 MSWin32 MSWin32-x86 2 6 01 Windows 7 MSWin32 MSWin32-x64 2 6 01 Windows 2008 MSWin32 MSWin32-x86 2 6 01 Windows 2008 MSWin32 MSWin32-x64 2 6 01 Windows CE MSWin32 ? 3 Cygwin cygwin cygwin The various MSWin32 Perl's can distinguish the OS they are running on via the value of the fifth element of the list returned from L<C<Win32::GetOSVersion()>|Win32/Win32::GetOSVersion()>. For example: if ($^O eq 'MSWin32') { my @os_version_info = Win32::GetOSVersion(); print +('3.1','95','NT')[$os_version_info[4]],"\n"; } There are also C<Win32::IsWinNT()|Win32/Win32::IsWinNT()>, C<Win32::IsWin95()|Win32/Win32::IsWin95()>, and L<C<Win32::GetOSName()>|Win32/Win32::GetOSName()>; try L<C<perldoc Win32>|Win32>. The very portable L<C<POSIX::uname()>|POSIX/C<uname>> will work too: c:\> perl -MPOSIX -we "print join '|', uname" Windows NT|moonru|5.0|Build 2195 (Service Pack 2)|x86 Errors set by Winsock functions are now put directly into C<$^E>, and the relevant C<WSAE*> error codes are now exported from the L<Errno> and L<POSIX> modules for testing this against. The previous behavior of putting the errors (converted to POSIX-style C<E*> error codes since Perl 5.20.0) into C<$!> was buggy due to the non-equivalence of like-named Winsock and POSIX error constants, a relationship between which has unfortunately been established in one way or another since Perl 5.8.0. The new behavior provides a much more robust solution for checking Winsock errors in portable software without accidentally matching POSIX tests that were intended for other OSes and may have different meanings for Winsock. The old behavior is currently retained, warts and all, for backwards compatibility, but users are encouraged to change any code that tests C<$!> against C<E*> constants for Winsock errors to instead test C<$^E> against C<WSAE*> constants. After a suitable deprecation period, which started with Perl 5.24, the old behavior may be removed, leaving C<$!> unchanged after Winsock function calls, to avoid any possible confusion over which error variable to check. Also see: =over 4 =item * The djgpp environment for DOS, L<http://www.delorie.com/djgpp/> and L<perldos>. =item * The EMX environment for DOS, OS/2, etc. emx@iaehv.nl, L<ftp://hobbes.nmsu.edu/pub/os2/dev/emx/> Also L<perlos2>. =item * Build instructions for Win32 in L<perlwin32>, or under the Cygnus environment in L<perlcygwin>. =item * The C<Win32::*> modules in L<Win32>. =item * The ActiveState Pages, L<https://www.activestate.com/> =item * The Cygwin environment for Win32; F<README.cygwin> (installed as L<perlcygwin>), L<https://www.cygwin.com/> =item * The U/WIN environment for Win32, L<http://www.research.att.com/sw/tools/uwin/> =item * Build instructions for OS/2, L<perlos2> =back =head2 VMS Perl on VMS is discussed in L<perlvms> in the Perl distribution. The official name of VMS as of this writing is OpenVMS. Interacting with Perl from the Digital Command Language (DCL) shell often requires a different set of quotation marks than Unix shells do. For example: $ perl -e "print ""Hello, world.\n""" Hello, world. There are several ways to wrap your Perl scripts in DCL F<.COM> files, if you are so inclined. For example: $ write sys$output "Hello from DCL!" $ if p1 .eqs. "" $ then perl -x 'f$environment("PROCEDURE") $ else perl -x - 'p1 'p2 'p3 'p4 'p5 'p6 'p7 'p8 $ deck/dollars="__END__" #!/usr/bin/perl print "Hello from Perl!\n"; __END__ $ endif Do take care with C<$ ASSIGN/nolog/user SYS$COMMAND: SYS$INPUT> if your Perl-in-DCL script expects to do things like C<< $read = <STDIN>; >>. The VMS operating system has two filesystems, designated by their on-disk structure (ODS) level: ODS-2 and its successor ODS-5. The initial port of Perl to VMS pre-dates ODS-5, but all current testing and development assumes ODS-5 and its capabilities, including case preservation, extended characters in filespecs, and names up to 8192 bytes long. Perl on VMS can accept either VMS- or Unix-style file specifications as in either of the following: $ perl -ne "print if /perl_setup/i" SYS$LOGIN:LOGIN.COM $ perl -ne "print if /perl_setup/i" /sys$login/login.com but not a mixture of both as in: $ perl -ne "print if /perl_setup/i" sys$login:/login.com Can't open sys$login:/login.com: file specification syntax error In general, the easiest path to portability is always to specify filenames in Unix format unless they will need to be processed by native commands or utilities. Because of this latter consideration, the L<File::Spec> module by default returns native format specifications regardless of input format. This default may be reversed so that filenames are always reported in Unix format by specifying the C<DECC$FILENAME_UNIX_REPORT> feature logical in the environment. The file type, or extension, is always present in a VMS-format file specification even if it's zero-length. This means that, by default, L<C<readdir>|perlfunc/readdir DIRHANDLE> will return a trailing dot on a file with no extension, so where you would see C<"a"> on Unix you'll see C<"a."> on VMS. However, the trailing dot may be suppressed by enabling the C<DECC$READDIR_DROPDOTNOTYPE> feature in the environment (see the CRTL documentation on feature logical names). What C<\n> represents depends on the type of file opened. It usually represents C<\012> but it could also be C<\015>, C<\012>, C<\015\012>, C<\000>, C<\040>, or nothing depending on the file organization and record format. The L<C<VMS::Stdio>|VMS::Stdio> module provides access to the special C<fopen()> requirements of files with unusual attributes on VMS. The value of L<C<$^O>|perlvar/$^O> on OpenVMS is "VMS". To determine the architecture that you are running on refer to L<C<$Config{archname}>|Config/C<archname>>. On VMS, perl determines the UTC offset from the C<SYS$TIMEZONE_DIFFERENTIAL> logical name. Although the VMS epoch began at 17-NOV-1858 00:00:00.00, calls to L<C<localtime>|perlfunc/localtime EXPR> are adjusted to count offsets from 01-JAN-1970 00:00:00.00, just like Unix. Also see: =over 4 =item * F<README.vms> (installed as F<README_vms>), L<perlvms> =item * vmsperl list, vmsperl-subscribe@perl.org =item * vmsperl on the web, L<http://www.sidhe.org/vmsperl/index.html> =item * VMS Software Inc. web site, L<http://www.vmssoftware.com> =back =head2 VOS Perl on VOS (also known as OpenVOS) is discussed in F<README.vos> in the Perl distribution (installed as L<perlvos>). Perl on VOS can accept either VOS- or Unix-style file specifications as in either of the following: $ perl -ne "print if /perl_setup/i" >system>notices $ perl -ne "print if /perl_setup/i" /system/notices or even a mixture of both as in: $ perl -ne "print if /perl_setup/i" >system/notices Even though VOS allows the slash character to appear in object names, because the VOS port of Perl interprets it as a pathname delimiting character, VOS files, directories, or links whose names contain a slash character cannot be processed. Such files must be renamed before they can be processed by Perl. Older releases of VOS (prior to OpenVOS Release 17.0) limit file names to 32 or fewer characters, prohibit file names from starting with a C<-> character, and prohibit file names from containing C< > (space) or any character from the set C<< !#%&'()*;<=>? >>. Newer releases of VOS (OpenVOS Release 17.0 or later) support a feature known as extended names. On these releases, file names can contain up to 255 characters, are prohibited from starting with a C<-> character, and the set of prohibited characters is reduced to C<< #%*<>? >>. There are restrictions involving spaces and apostrophes: these characters must not begin or end a name, nor can they immediately precede or follow a period. Additionally, a space must not immediately precede another space or hyphen. Specifically, the following character combinations are prohibited: space-space, space-hyphen, period-space, space-period, period-apostrophe, apostrophe-period, leading or trailing space, and leading or trailing apostrophe. Although an extended file name is limited to 255 characters, a path name is still limited to 256 characters. The value of L<C<$^O>|perlvar/$^O> on VOS is "vos". To determine the architecture that you are running on refer to L<C<$Config{archname}>|Config/C<archname>>. Also see: =over 4 =item * F<README.vos> (installed as L<perlvos>) =item * The VOS mailing list. There is no specific mailing list for Perl on VOS. You can contact the Stratus Technologies Customer Assistance Center (CAC) for your region, or you can use the contact information located in the distribution files on the Stratus Anonymous FTP site. =item * Stratus Technologies on the web at L<http://www.stratus.com> =item * VOS Open-Source Software on the web at L<http://ftp.stratus.com/pub/vos/vos.html> =back =head2 EBCDIC Platforms v5.22 core Perl runs on z/OS (formerly OS/390). Theoretically it could run on the successors of OS/400 on AS/400 minicomputers as well as VM/ESA, and BS2000 for S/390 Mainframes. Such computers use EBCDIC character sets internally (usually Character Code Set ID 0037 for OS/400 and either 1047 or POSIX-BC for S/390 systems). The rest of this section may need updating, but we don't know what it should say. Please submit comments to L<https://github.com/Perl/perl5/issues>. On the mainframe Perl currently works under the "Unix system services for OS/390" (formerly known as OpenEdition), VM/ESA OpenEdition, or the BS200 POSIX-BC system (BS2000 is supported in Perl 5.6 and greater). See L<perlos390> for details. Note that for OS/400 there is also a port of Perl 5.8.1/5.10.0 or later to the PASE which is ASCII-based (as opposed to ILE which is EBCDIC-based), see L<perlos400>. As of R2.5 of USS for OS/390 and Version 2.3 of VM/ESA these Unix sub-systems do not support the C<#!> shebang trick for script invocation. Hence, on OS/390 and VM/ESA Perl scripts can be executed with a header similar to the following simple script: : # use perl eval 'exec /usr/local/bin/perl -S $0 ${1+"$@"}' if 0; #!/usr/local/bin/perl # just a comment really print "Hello from perl!\n"; OS/390 will support the C<#!> shebang trick in release 2.8 and beyond. Calls to L<C<system>|perlfunc/system LIST> and backticks can use POSIX shell syntax on all S/390 systems. On the AS/400, if PERL5 is in your library list, you may need to wrap your Perl scripts in a CL procedure to invoke them like so: BEGIN CALL PGM(PERL5/PERL) PARM('/QOpenSys/hello.pl') ENDPGM This will invoke the Perl script F<hello.pl> in the root of the QOpenSys file system. On the AS/400 calls to L<C<system>|perlfunc/system LIST> or backticks must use CL syntax. On these platforms, bear in mind that the EBCDIC character set may have an effect on what happens with some Perl functions (such as L<C<chr>|perlfunc/chr NUMBER>, L<C<pack>|perlfunc/pack TEMPLATE,LIST>, L<C<print>|perlfunc/print FILEHANDLE LIST>, L<C<printf>|perlfunc/printf FILEHANDLE FORMAT, LIST>, L<C<ord>|perlfunc/ord EXPR>, L<C<sort>|perlfunc/sort SUBNAME LIST>, L<C<sprintf>|perlfunc/sprintf FORMAT, LIST>, L<C<unpack>|perlfunc/unpack TEMPLATE,EXPR>), as well as bit-fiddling with ASCII constants using operators like L<C<^>, C<&> and C<|>|perlop/Bitwise String Operators>, not to mention dealing with socket interfaces to ASCII computers (see L</"Newlines">). Fortunately, most web servers for the mainframe will correctly translate the C<\n> in the following statement to its ASCII equivalent (C<\r> is the same under both Unix and z/OS): print "Content-type: text/html\r\n\r\n"; The values of L<C<$^O>|perlvar/$^O> on some of these platforms include: uname $^O $Config{archname} -------------------------------------------- OS/390 os390 os390 OS400 os400 os400 POSIX-BC posix-bc BS2000-posix-bc Some simple tricks for determining if you are running on an EBCDIC platform could include any of the following (perhaps all): if ("\t" eq "\005") { print "EBCDIC may be spoken here!\n"; } if (ord('A') == 193) { print "EBCDIC may be spoken here!\n"; } if (chr(169) eq 'z') { print "EBCDIC may be spoken here!\n"; } One thing you may not want to rely on is the EBCDIC encoding of punctuation characters since these may differ from code page to code page (and once your module or script is rumoured to work with EBCDIC, folks will want it to work with all EBCDIC character sets). Also see: =over 4 =item * L<perlos390>, L<perlos400>, L<perlbs2000>, L<perlebcdic>. =item * The perl-mvs@perl.org list is for discussion of porting issues as well as general usage issues for all EBCDIC Perls. Send a message body of "subscribe perl-mvs" to majordomo@perl.org. =item * AS/400 Perl information at L<http://as400.rochester.ibm.com/> as well as on CPAN in the F<ports/> directory. =back =head2 Acorn RISC OS Because Acorns use ASCII with newlines (C<\n>) in text files as C<\012> like Unix, and because Unix filename emulation is turned on by default, most simple scripts will probably work "out of the box". The native filesystem is modular, and individual filesystems are free to be case-sensitive or insensitive, and are usually case-preserving. Some native filesystems have name length limits, which file and directory names are silently truncated to fit. Scripts should be aware that the standard filesystem currently has a name length limit of B<10> characters, with up to 77 items in a directory, but other filesystems may not impose such limitations. Native filenames are of the form Filesystem#Special_Field::DiskName.$.Directory.Directory.File where Special_Field is not usually present, but may contain . and $ . Filesystem =~ m|[A-Za-z0-9_]| DsicName =~ m|[A-Za-z0-9_/]| $ represents the root directory . is the path separator @ is the current directory (per filesystem but machine global) ^ is the parent directory Directory and File =~ m|[^\0- "\.\$\%\&:\@\\^\|\177]+| The default filename translation is roughly C<tr|/.|./|>, swapping dots and slashes. Note that C<"ADFS::HardDisk.$.File" ne 'ADFS::HardDisk.$.File'> and that the second stage of C<$> interpolation in regular expressions will fall foul of the L<C<$.>|perlvar/$.> variable if scripts are not careful. Logical paths specified by system variables containing comma-separated search lists are also allowed; hence C<System:Modules> is a valid filename, and the filesystem will prefix C<Modules> with each section of C<System$Path> until a name is made that points to an object on disk. Writing to a new file C<System:Modules> would be allowed only if C<System$Path> contains a single item list. The filesystem will also expand system variables in filenames if enclosed in angle brackets, so C<< <System$Dir>.Modules >> would look for the file S<C<$ENV{'System$Dir'} . 'Modules'>>. The obvious implication of this is that B<fully qualified filenames can start with C<< <> >>> and the three-argument form of L<C<open>|perlfunc/open FILEHANDLE,MODE,EXPR> should always be used. Because C<.> was in use as a directory separator and filenames could not be assumed to be unique after 10 characters, Acorn implemented the C compiler to strip the trailing C<.c> C<.h> C<.s> and C<.o> suffix from filenames specified in source code and store the respective files in subdirectories named after the suffix. Hence files are translated: foo.h h.foo C:foo.h C:h.foo (logical path variable) sys/os.h sys.h.os (C compiler groks Unix-speak) 10charname.c c.10charname 10charname.o o.10charname 11charname_.c c.11charname (assuming filesystem truncates at 10) The Unix emulation library's translation of filenames to native assumes that this sort of translation is required, and it allows a user-defined list of known suffixes that it will transpose in this fashion. This may seem transparent, but consider that with these rules F<foo/bar/baz.h> and F<foo/bar/h/baz> both map to F<foo.bar.h.baz>, and that L<C<readdir>|perlfunc/readdir DIRHANDLE> and L<C<glob>|perlfunc/glob EXPR> cannot and do not attempt to emulate the reverse mapping. Other C<.>'s in filenames are translated to C</>. As implied above, the environment accessed through L<C<%ENV>|perlvar/%ENV> is global, and the convention is that program specific environment variables are of the form C<Program$Name>. Each filesystem maintains a current directory, and the current filesystem's current directory is the B<global> current directory. Consequently, sociable programs don't change the current directory but rely on full pathnames, and programs (and Makefiles) cannot assume that they can spawn a child process which can change the current directory without affecting its parent (and everyone else for that matter). Because native operating system filehandles are global and are currently allocated down from 255, with 0 being a reserved value, the Unix emulation library emulates Unix filehandles. Consequently, you can't rely on passing C<STDIN>, C<STDOUT>, or C<STDERR> to your children. The desire of users to express filenames of the form C<< <Foo$Dir>.Bar >> on the command line unquoted causes problems, too: L<C<``>|perlop/C<qxE<sol>I<STRING>E<sol>>> command output capture has to perform a guessing game. It assumes that a string C<< <[^<>]+\$[^<>]> >> is a reference to an environment variable, whereas anything else involving C<< < >> or C<< > >> is redirection, and generally manages to be 99% right. Of course, the problem remains that scripts cannot rely on any Unix tools being available, or that any tools found have Unix-like command line arguments. Extensions and XS are, in theory, buildable by anyone using free tools. In practice, many don't, as users of the Acorn platform are used to binary distributions. MakeMaker does run, but no available make currently copes with MakeMaker's makefiles; even if and when this should be fixed, the lack of a Unix-like shell will cause problems with makefile rules, especially lines of the form C<cd sdbm && make all>, and anything using quoting. S<"RISC OS"> is the proper name for the operating system, but the value in L<C<$^O>|perlvar/$^O> is "riscos" (because we don't like shouting). =head2 Other perls Perl has been ported to many platforms that do not fit into any of the categories listed above. Some, such as AmigaOS, QNX, Plan 9, and VOS, have been well-integrated into the standard Perl source code kit. You may need to see the F<ports/> directory on CPAN for information, and possibly binaries, for the likes of: aos, Atari ST, lynxos, riscos, Novell Netware, Tandem Guardian, I<etc.> (Yes, we know that some of these OSes may fall under the Unix category, but we are not a standards body.) Some approximate operating system names and their L<C<$^O>|perlvar/$^O> values in the "OTHER" category include: OS $^O $Config{archname} ------------------------------------------ Amiga DOS amigaos m68k-amigos See also: =over 4 =item * Amiga, F<README.amiga> (installed as L<perlamiga>). =item * A free perl5-based PERL.NLM for Novell Netware is available in precompiled binary and source code form from L<http://www.novell.com/> as well as from CPAN. =item * S<Plan 9>, F<README.plan9> =back =head1 FUNCTION IMPLEMENTATIONS Listed below are functions that are either completely unimplemented or else have been implemented differently on various platforms. Preceding each description will be, in parentheses, a list of platforms that the description applies to. The list may well be incomplete, or even wrong in some places. When in doubt, consult the platform-specific README files in the Perl source distribution, and any other documentation resources accompanying a given port. Be aware, moreover, that even among Unix-ish systems there are variations. For many functions, you can also query L<C<%Config>|Config/DESCRIPTION>, exported by default from the L<C<Config>|Config> module. For example, to check whether the platform has the L<C<lstat>|perlfunc/lstat FILEHANDLE> call, check L<C<$Config{d_lstat}>|Config/C<d_lstat>>. See L<Config> for a full description of available variables. =head2 Alphabetical Listing of Perl Functions =over 8 =item -X (Win32) C<-w> only inspects the read-only file attribute (FILE_ATTRIBUTE_READONLY), which determines whether the directory can be deleted, not whether it can be written to. Directories always have read and write access unless denied by discretionary access control lists (DACLs). (VMS) C<-r>, C<-w>, C<-x>, and C<-o> tell whether the file is accessible, which may not reflect UIC-based file protections. (S<RISC OS>) C<-s> by name on an open file will return the space reserved on disk, rather than the current extent. C<-s> on an open filehandle returns the current size. (Win32, VMS, S<RISC OS>) C<-R>, C<-W>, C<-X>, C<-O> are indistinguishable from C<-r>, C<-w>, C<-x>, C<-o>. (Win32, VMS, S<RISC OS>) C<-g>, C<-k>, C<-l>, C<-u>, C<-A> are not particularly meaningful. (VMS, S<RISC OS>) C<-p> is not particularly meaningful. (VMS) C<-d> is true if passed a device spec without an explicit directory. (Win32) C<-x> (or C<-X>) determine if a file ends in one of the executable suffixes. C<-S> is meaningless. (S<RISC OS>) C<-x> (or C<-X>) determine if a file has an executable file type. =item alarm (Win32) Emulated using timers that must be explicitly polled whenever Perl wants to dispatch "safe signals" and therefore cannot interrupt blocking system calls. =item atan2 (Tru64, HP-UX 10.20) Due to issues with various CPUs, math libraries, compilers, and standards, results for C<atan2> may vary depending on any combination of the above. Perl attempts to conform to the Open Group/IEEE standards for the results returned from C<atan2>, but cannot force the issue if the system Perl is run on does not allow it. The current version of the standards for C<atan2> is available at L<http://www.opengroup.org/onlinepubs/009695399/functions/atan2.html>. =item binmode (S<RISC OS>) Meaningless. (VMS) Reopens file and restores pointer; if function fails, underlying filehandle may be closed, or pointer may be in a different position. (Win32) The value returned by L<C<tell>|perlfunc/tell FILEHANDLE> may be affected after the call, and the filehandle may be flushed. =item chmod (Win32) Only good for changing "owner" read-write access; "group" and "other" bits are meaningless. (S<RISC OS>) Only good for changing "owner" and "other" read-write access. (VOS) Access permissions are mapped onto VOS access-control list changes. (Cygwin) The actual permissions set depend on the value of the C<CYGWIN> variable in the SYSTEM environment settings. (Android) Setting the exec bit on some locations (generally F</sdcard>) will return true but not actually set the bit. (VMS) A mode argument of zero sets permissions to the user's default permission mask rather than disabling all permissions. =item chown (S<Plan 9>, S<RISC OS>) Not implemented. (Win32) Does nothing, but won't fail. (VOS) A little funky, because VOS's notion of ownership is a little funky. =item chroot (Win32, VMS, S<Plan 9>, S<RISC OS>, VOS) Not implemented. =item crypt (Win32) May not be available if library or source was not provided when building perl. (Android) Not implemented. =item dbmclose (VMS, S<Plan 9>, VOS) Not implemented. =item dbmopen (VMS, S<Plan 9>, VOS) Not implemented. =item dump (S<RISC OS>) Not useful. (Cygwin, Win32) Not supported. (VMS) Invokes VMS debugger. =item exec (Win32) C<exec LIST> without the use of indirect object syntax (C<exec PROGRAM LIST>) may fall back to trying the shell if the first C<spawn()> fails. Note that the list form of exec() is emulated since the Win32 API CreateProcess() accepts a simple string rather than an array of command-line arguments. This may have security implications for your code. (SunOS, Solaris, HP-UX) Does not automatically flush output handles on some platforms. (Symbian OS) Not supported. =item exit (VMS) Emulates Unix C<exit> (which considers C<exit 1> to indicate an error) by mapping the C<1> to C<SS$_ABORT> (C<44>). This behavior may be overridden with the pragma L<C<use vmsish 'exit'>|vmsish/C<vmsish exit>>. As with the CRTL's C<exit()> function, C<exit 0> is also mapped to an exit status of C<SS$_NORMAL> (C<1>); this mapping cannot be overridden. Any other argument to C<exit> is used directly as Perl's exit status. On VMS, unless the future POSIX_EXIT mode is enabled, the exit code should always be a valid VMS exit code and not a generic number. When the POSIX_EXIT mode is enabled, a generic number will be encoded in a method compatible with the C library _POSIX_EXIT macro so that it can be decoded by other programs, particularly ones written in C, like the GNV package. (Solaris) C<exit> resets file pointers, which is a problem when called from a child process (created by L<C<fork>|perlfunc/fork>) in L<C<BEGIN>|perlmod/BEGIN, UNITCHECK, CHECK, INIT and END>. A workaround is to use L<C<POSIX::_exit>|POSIX/C<_exit>>. exit unless $Config{archname} =~ /\bsolaris\b/; require POSIX; POSIX::_exit(0); =item fcntl (Win32) Not implemented. (VMS) Some functions available based on the version of VMS. =item flock (VMS, S<RISC OS>, VOS) Not implemented. =item fork (AmigaOS, S<RISC OS>, VMS) Not implemented. (Win32) Emulated using multiple interpreters. See L<perlfork>. (SunOS, Solaris, HP-UX) Does not automatically flush output handles on some platforms. =item getlogin (S<RISC OS>) Not implemented. =item getpgrp (Win32, VMS, S<RISC OS>) Not implemented. =item getppid (Win32, S<RISC OS>) Not implemented. =item getpriority (Win32, VMS, S<RISC OS>, VOS) Not implemented. =item getpwnam (Win32) Not implemented. (S<RISC OS>) Not useful. =item getgrnam (Win32, VMS, S<RISC OS>) Not implemented. =item getnetbyname (Android, Win32, S<Plan 9>) Not implemented. =item getpwuid (Win32) Not implemented. (S<RISC OS>) Not useful. =item getgrgid (Win32, VMS, S<RISC OS>) Not implemented. =item getnetbyaddr (Android, Win32, S<Plan 9>) Not implemented. =item getprotobynumber (Android) Not implemented. =item getpwent (Android, Win32) Not implemented. =item getgrent (Android, Win32, VMS) Not implemented. =item gethostbyname (S<Irix 5>) C<gethostbyname('localhost')> does not work everywhere: you may have to use C<gethostbyname('127.0.0.1')>. =item gethostent (Win32) Not implemented. =item getnetent (Android, Win32, S<Plan 9>) Not implemented. =item getprotoent (Android, Win32, S<Plan 9>) Not implemented. =item getservent (Win32, S<Plan 9>) Not implemented. =item seekdir (Android) Not implemented. =item sethostent (Android, Win32, S<Plan 9>, S<RISC OS>) Not implemented. =item setnetent (Win32, S<Plan 9>, S<RISC OS>) Not implemented. =item setprotoent (Android, Win32, S<Plan 9>, S<RISC OS>) Not implemented. =item setservent (S<Plan 9>, Win32, S<RISC OS>) Not implemented. =item endpwent (Win32) Not implemented. (Android) Either not implemented or a no-op. =item endgrent (Android, S<RISC OS>, VMS, Win32) Not implemented. =item endhostent (Android, Win32) Not implemented. =item endnetent (Android, Win32, S<Plan 9>) Not implemented. =item endprotoent (Android, Win32, S<Plan 9>) Not implemented. =item endservent (S<Plan 9>, Win32) Not implemented. =item getsockopt (S<Plan 9>) Not implemented. =item glob This operator is implemented via the L<C<File::Glob>|File::Glob> extension on most platforms. See L<File::Glob> for portability information. =item gmtime In theory, C<gmtime> is reliable from -2**63 to 2**63-1. However, because work-arounds in the implementation use floating point numbers, it will become inaccurate as the time gets larger. This is a bug and will be fixed in the future. (VOS) Time values are 32-bit quantities. =item ioctl (VMS) Not implemented. (Win32) Available only for socket handles, and it does what the C<ioctlsocket()> call in the Winsock API does. (S<RISC OS>) Available only for socket handles. =item kill (S<RISC OS>) Not implemented, hence not useful for taint checking. (Win32) C<kill> doesn't send a signal to the identified process like it does on Unix platforms. Instead C<kill($sig, $pid)> terminates the process identified by C<$pid>, and makes it exit immediately with exit status C<$sig>. As in Unix, if C<$sig> is 0 and the specified process exists, it returns true without actually terminating it. (Win32) C<kill(-9, $pid)> will terminate the process specified by C<$pid> and recursively all child processes owned by it. This is different from the Unix semantics, where the signal will be delivered to all processes in the same process group as the process specified by C<$pid>. (VMS) A pid of -1 indicating all processes on the system is not currently supported. =item link (S<RISC OS>, VOS) Not implemented. (AmigaOS) Link count not updated because hard links are not quite that hard (They are sort of half-way between hard and soft links). (Win32) Hard links are implemented on Win32 under NTFS only. They are natively supported on Windows 2000 and later. On Windows NT they are implemented using the Windows POSIX subsystem support and the Perl process will need Administrator or Backup Operator privileges to create hard links. (VMS) Available on 64 bit OpenVMS 8.2 and later. =item localtime C<localtime> has the same range as L</gmtime>, but because time zone rules change, its accuracy for historical and future times may degrade but usually by no more than an hour. =item lstat (S<RISC OS>) Not implemented. (Win32) Return values (especially for device and inode) may be bogus. =item msgctl =item msgget =item msgsnd =item msgrcv (Android, Win32, VMS, S<Plan 9>, S<RISC OS>, VOS) Not implemented. =item open (S<RISC OS>) Open modes C<|-> and C<-|> are unsupported. (SunOS, Solaris, HP-UX) Opening a process does not automatically flush output handles on some platforms. (Win32) Both of modes C<|-> and C<-|> are supported, but the list form is emulated since the Win32 API CreateProcess() accepts a simple string rather than an array of arguments. This may have security implications for your code. =item readlink (Win32, VMS, S<RISC OS>) Not implemented. =item rename (Win32) Can't move directories between directories on different logical volumes. =item rewinddir (Win32) Will not cause L<C<readdir>|perlfunc/readdir DIRHANDLE> to re-read the directory stream. The entries already read before the C<rewinddir> call will just be returned again from a cache buffer. =item select (Win32, VMS) Only implemented on sockets. (S<RISC OS>) Only reliable on sockets. Note that the L<C<select FILEHANDLE>|perlfunc/select FILEHANDLE> form is generally portable. =item semctl =item semget =item semop (Android, Win32, VMS, S<RISC OS>) Not implemented. =item setgrent (Android, VMS, Win32, S<RISC OS>) Not implemented. =item setpgrp (Win32, VMS, S<RISC OS>, VOS) Not implemented. =item setpriority (Win32, VMS, S<RISC OS>, VOS) Not implemented. =item setpwent (Android, Win32, S<RISC OS>) Not implemented. =item setsockopt (S<Plan 9>) Not implemented. =item shmctl =item shmget =item shmread =item shmwrite (Android, Win32, VMS, S<RISC OS>) Not implemented. =item sleep (Win32) Emulated using synchronization functions such that it can be interrupted by L<C<alarm>|perlfunc/alarm SECONDS>, and limited to a maximum of 4294967 seconds, approximately 49 days. =item socketpair (S<RISC OS>) Not implemented. (VMS) Available on 64 bit OpenVMS 8.2 and later. =item stat Platforms that do not have C<rdev>, C<blksize>, or C<blocks> will return these as C<''>, so numeric comparison or manipulation of these fields may cause 'not numeric' warnings. (S<Mac OS X>) C<ctime> not supported on UFS. (Win32) C<ctime> is creation time instead of inode change time. (Win32) C<dev> and C<ino> are not meaningful. (VMS) C<dev> and C<ino> are not necessarily reliable. (S<RISC OS>) C<mtime>, C<atime> and C<ctime> all return the last modification time. C<dev> and C<ino> are not necessarily reliable. (OS/2) C<dev>, C<rdev>, C<blksize>, and C<blocks> are not available. C<ino> is not meaningful and will differ between stat calls on the same file. (Cygwin) Some versions of cygwin when doing a C<stat("foo")> and not finding it may then attempt to C<stat("foo.exe")>. (Win32) C<stat> needs to open the file to determine the link count and update attributes that may have been changed through hard links. Setting L<C<${^WIN32_SLOPPY_STAT}>|perlvar/${^WIN32_SLOPPY_STAT}> to a true value speeds up C<stat> by not performing this operation. =item symlink (Win32, S<RISC OS>) Not implemented. (VMS) Implemented on 64 bit VMS 8.3. VMS requires the symbolic link to be in Unix syntax if it is intended to resolve to a valid path. =item syscall (Win32, VMS, S<RISC OS>, VOS) Not implemented. =item sysopen (S<Mac OS>, OS/390) The traditional C<0>, C<1>, and C<2> MODEs are implemented with different numeric values on some systems. The flags exported by L<C<Fcntl>|Fcntl> (C<O_RDONLY>, C<O_WRONLY>, C<O_RDWR>) should work everywhere though. =item system (Win32) As an optimization, may not call the command shell specified in C<$ENV{PERL5SHELL}>. C<system(1, @args)> spawns an external process and immediately returns its process designator, without waiting for it to terminate. Return value may be used subsequently in L<C<wait>|perlfunc/wait> or L<C<waitpid>|perlfunc/waitpid PID,FLAGS>. Failure to C<spawn()> a subprocess is indicated by setting L<C<$?>|perlvar/$?> to C<<< 255 << 8 >>>. L<C<$?>|perlvar/$?> is set in a way compatible with Unix (i.e. the exit status of the subprocess is obtained by C<<< $? >> 8 >>>, as described in the documentation). Note that the list form of system() is emulated since the Win32 API CreateProcess() accepts a simple string rather than an array of command-line arguments. This may have security implications for your code. (S<RISC OS>) There is no shell to process metacharacters, and the native standard is to pass a command line terminated by "\n" "\r" or "\0" to the spawned program. Redirection such as C<< > foo >> is performed (if at all) by the run time library of the spawned program. C<system LIST> will call the Unix emulation library's L<C<exec>|perlfunc/exec LIST> emulation, which attempts to provide emulation of the stdin, stdout, stderr in force in the parent, provided the child program uses a compatible version of the emulation library. C<system SCALAR> will call the native command line directly and no such emulation of a child Unix program will occur. Mileage B<will> vary. (Win32) C<system LIST> without the use of indirect object syntax (C<system PROGRAM LIST>) may fall back to trying the shell if the first C<spawn()> fails. (SunOS, Solaris, HP-UX) Does not automatically flush output handles on some platforms. (VMS) As with Win32, C<system(1, @args)> spawns an external process and immediately returns its process designator without waiting for the process to terminate. In this case the return value may be used subsequently in L<C<wait>|perlfunc/wait> or L<C<waitpid>|perlfunc/waitpid PID,FLAGS>. Otherwise the return value is POSIX-like (shifted up by 8 bits), which only allows room for a made-up value derived from the severity bits of the native 32-bit condition code (unless overridden by L<C<use vmsish 'status'>|vmsish/C<vmsish status>>). If the native condition code is one that has a POSIX value encoded, the POSIX value will be decoded to extract the expected exit value. For more details see L<perlvms/$?>. =item telldir (Android) Not implemented. =item times (Win32) "Cumulative" times will be bogus. On anything other than Windows NT or Windows 2000, "system" time will be bogus, and "user" time is actually the time returned by the L<C<clock()>|clock(3)> function in the C runtime library. (S<RISC OS>) Not useful. =item truncate (Older versions of VMS) Not implemented. (VOS) Truncation to same-or-shorter lengths only. (Win32) If a FILEHANDLE is supplied, it must be writable and opened in append mode (i.e., use C<<< open(my $fh, '>>', 'filename') >>> or C<sysopen(my $fh, ..., O_APPEND|O_RDWR)>. If a filename is supplied, it should not be held open elsewhere. =item umask Returns C<undef> where unavailable. (AmigaOS) C<umask> works but the correct permissions are set only when the file is finally closed. =item utime (VMS, S<RISC OS>) Only the modification time is updated. (Win32) May not behave as expected. Behavior depends on the C runtime library's implementation of L<C<utime()>|utime(2)>, and the filesystem being used. The FAT filesystem typically does not support an "access time" field, and it may limit timestamps to a granularity of two seconds. =item wait =item waitpid (Win32) Can only be applied to process handles returned for processes spawned using C<system(1, ...)> or pseudo processes created with L<C<fork>|perlfunc/fork>. (S<RISC OS>) Not useful. =back =head1 Supported Platforms The following platforms are known to build Perl 5.12 (as of April 2010, its release date) from the standard source code distribution available at L<http://www.cpan.org/src> =over =item Linux (x86, ARM, IA64) =item HP-UX =item AIX =item Win32 =over =item Windows 2000 =item Windows XP =item Windows Server 2003 =item Windows Vista =item Windows Server 2008 =item Windows 7 =back =item Cygwin Some tests are known to fail: =over =item * F<ext/XS-APItest/t/call_checker.t> - see L<https://github.com/Perl/perl5/issues/10750> =item * F<dist/I18N-Collate/t/I18N-Collate.t> =item * F<ext/Win32CORE/t/win32core.t> - may fail on recent cygwin installs. =back =item Solaris (x86, SPARC) =item OpenVMS =over =item Alpha (7.2 and later) =item I64 (8.2 and later) =back =item Symbian =item NetBSD =item FreeBSD =item Debian GNU/kFreeBSD =item Haiku =item Irix (6.5. What else?) =item OpenBSD =item Dragonfly BSD =item Midnight BSD =item QNX Neutrino RTOS (6.5.0) =item MirOS BSD =item Stratus OpenVOS (17.0 or later) Caveats: =over =item time_t issues that may or may not be fixed =back =item Symbian (Series 60 v3, 3.2 and 5 - what else?) =item Stratus VOS / OpenVOS =item AIX =item Android =item FreeMINT Perl now builds with FreeMiNT/Atari. It fails a few tests, that needs some investigation. The FreeMiNT port uses GNU dld for loadable module capabilities. So ensure you have that library installed when building perl. =back =head1 EOL Platforms =head2 (Perl 5.20) The following platforms were supported by a previous version of Perl but have been officially removed from Perl's source code as of 5.20: =over =item AT&T 3b1 =back =head2 (Perl 5.14) The following platforms were supported up to 5.10. They may still have worked in 5.12, but supporting code has been removed for 5.14: =over =item Windows 95 =item Windows 98 =item Windows ME =item Windows NT4 =back =head2 (Perl 5.12) The following platforms were supported by a previous version of Perl but have been officially removed from Perl's source code as of 5.12: =over =item Atari MiNT =item Apollo Domain/OS =item Apple Mac OS 8/9 =item Tenon Machten =back =head1 Supported Platforms (Perl 5.8) As of July 2002 (the Perl release 5.8.0), the following platforms were able to build Perl from the standard source code distribution available at L<http://www.cpan.org/src/> AIX BeOS BSD/OS (BSDi) Cygwin DG/UX DOS DJGPP 1) DYNIX/ptx EPOC R5 FreeBSD HI-UXMPP (Hitachi) (5.8.0 worked but we didn't know it) HP-UX IRIX Linux Mac OS Classic Mac OS X (Darwin) MPE/iX NetBSD NetWare NonStop-UX ReliantUNIX (formerly SINIX) OpenBSD OpenVMS (formerly VMS) Open UNIX (Unixware) (since Perl 5.8.1/5.9.0) OS/2 OS/400 (using the PASE) (since Perl 5.8.1/5.9.0) POSIX-BC (formerly BS2000) QNX Solaris SunOS 4 SUPER-UX (NEC) Tru64 UNIX (formerly DEC OSF/1, Digital UNIX) UNICOS UNICOS/mk UTS VOS / OpenVOS Win95/98/ME/2K/XP 2) WinCE z/OS (formerly OS/390) VM/ESA 1) in DOS mode either the DOS or OS/2 ports can be used 2) compilers: Borland, MinGW (GCC), VC6 The following platforms worked with the previous releases (5.6 and 5.7), but we did not manage either to fix or to test these in time for the 5.8.0 release. There is a very good chance that many of these will work fine with the 5.8.0. BSD/OS DomainOS Hurd LynxOS MachTen PowerMAX SCO SV SVR4 Unixware Windows 3.1 Known to be broken for 5.8.0 (but 5.6.1 and 5.7.2 can be used): AmigaOS 3 The following platforms have been known to build Perl from source in the past (5.005_03 and earlier), but we haven't been able to verify their status for the current release, either because the hardware/software platforms are rare or because we don't have an active champion on these platforms--or both. They used to work, though, so go ahead and try compiling them, and let L<https://github.com/Perl/perl5/issues> know of any trouble. 3b1 A/UX ConvexOS CX/UX DC/OSx DDE SMES DOS EMX Dynix EP/IX ESIX FPS GENIX Greenhills ISC MachTen 68k MPC NEWS-OS NextSTEP OpenSTEP Opus Plan 9 RISC/os SCO ODT/OSR Stellar SVR2 TI1500 TitanOS Ultrix Unisys Dynix The following platforms have their own source code distributions and binaries available via L<http://www.cpan.org/ports/> Perl release OS/400 (ILE) 5.005_02 Tandem Guardian 5.004 The following platforms have only binaries available via L<http://www.cpan.org/ports/index.html> : Perl release Acorn RISCOS 5.005_02 AOS 5.002 LynxOS 5.004_02 Although we do suggest that you always build your own Perl from the source code, both for maximal configurability and for security, in case you are in a hurry you can check L<http://www.cpan.org/ports/index.html> for binary distributions. =head1 SEE ALSO L<perlaix>, L<perlamiga>, L<perlbs2000>, L<perlcygwin>, L<perldos>, L<perlebcdic>, L<perlfreebsd>, L<perlhurd>, L<perlhpux>, L<perlirix>, L<perlmacos>, L<perlmacosx>, L<perlnetware>, L<perlos2>, L<perlos390>, L<perlos400>, L<perlplan9>, L<perlqnx>, L<perlsolaris>, L<perltru64>, L<perlunicode>, L<perlvms>, L<perlvos>, L<perlwin32>, and L<Win32>. =head1 AUTHORS / CONTRIBUTORS Abigail <abigail@abigail.be>, Charles Bailey <bailey@newman.upenn.edu>, Graham Barr <gbarr@pobox.com>, Tom Christiansen <tchrist@perl.com>, Nicholas Clark <nick@ccl4.org>, Thomas Dorner <Thomas.Dorner@start.de>, Andy Dougherty <doughera@lafayette.edu>, Dominic Dunlop <domo@computer.org>, Neale Ferguson <neale@vma.tabnsw.com.au>, David J. Fiander <davidf@mks.com>, Paul Green <Paul.Green@stratus.com>, M.J.T. Guy <mjtg@cam.ac.uk>, Jarkko Hietaniemi <jhi@iki.fi>, Luther Huffman <lutherh@stratcom.com>, Nick Ing-Simmons <nick@ing-simmons.net>, Andreas J. KE<ouml>nig <a.koenig@mind.de>, Markus Laker <mlaker@contax.co.uk>, Andrew M. Langmead <aml@world.std.com>, Lukas Mai <l.mai@web.de>, Larry Moore <ljmoore@freespace.net>, Paul Moore <Paul.Moore@uk.origin-it.com>, Chris Nandor <pudge@pobox.com>, Matthias Neeracher <neeracher@mac.com>, Philip Newton <pne@cpan.org>, Gary Ng <71564.1743@CompuServe.COM>, Tom Phoenix <rootbeer@teleport.com>, AndrE<eacute> Pirard <A.Pirard@ulg.ac.be>, Peter Prymmer <pvhp@forte.com>, Hugo van der Sanden <hv@crypt0.demon.co.uk>, Gurusamy Sarathy <gsar@activestate.com>, Paul J. Schinder <schinder@pobox.com>, Michael G Schwern <schwern@pobox.com>, Dan Sugalski <dan@sidhe.org>, Nathan Torkington <gnat@frii.com>, John Malmberg <wb8tyw@qsl.net> perlsynology.pod 0000644 00000017430 15125556335 0010035 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specially designed to be readable as is. But if you have been into Perl you probably already know this. =head1 NAME perlsynology - Perl 5 on Synology DSM systems =head1 DESCRIPTION Synology manufactures a vast number of Network Attached Storage (NAS) devices that are very popular in large organisations as well as small businesses and homes. The NAS systems are equipped with Synology Disk Storage Manager (DSM), which is a trimmed-down Linux system enhanced with several tools for managing the NAS. There are several flavours of hardware: Marvell Armada (ARMv5tel, ARMv7l), Intel Atom (i686, x86_64), Freescale QorIQ (PPC), and more. For a full list see the L<Synology FAQ|https://forum.synology.com/wiki/index.php/What_kind_of_CPU_does_my_NAS_have>. Since it is based on Linux, the NAS can run many popular Linux software packages, including Perl. In fact, Synology provides a ready-to-install package for Perl, depending on the version of DSM the installed perl ranges from 5.8.6 on DSM-4.3 to 5.24.0 on DSM-6.1. There is an active user community that provides many software packages for the Synology DSM systems; at the time of writing this document they provide Perl version 5.24.1. This document describes various features of Synology DSM operating system that will affect how Perl 5 (hereafter just Perl) is configured, compiled and/or runs. It has been compiled and verified by Johan Vromans for the Synology DS413 (QorIQ), with feedback from H.Merijn Brand (DS213, ARMv5tel and RS815, Intel Atom x64). =head2 Setting up the build environment =head3 DSM 5 As DSM is a trimmed-down Linux system, it lacks many of the tools and libraries commonly found on Linux. The basic tools like sh, cp, rm, etc. are implemented using L<BusyBox|https://en.wikipedia.org/wiki/BusyBox>. =over 4 =item * Using your favourite browser open the DSM management page and start the Package Center. =item * If you want to smoke test Perl, install C<Perl>. =item * In Settings, add the following Package Sources: https://www.cphub.net http://packages.quadrat4.de =item * Still in Settings, in Channel Update, select Beta Channel. =item * Press Refresh. In the left panel the item "Community" will appear. Click it. Select "Bootstrap Installer Beta" and install it. =item * Likewise, install "iPKGui Beta". The application window should now show an icon for iPKGui. =item * Start iPKGui. Install the packages C<make>, C<gcc> and C<coreutils>. If you want to smoke test Perl, install C<patch>. =back The next step is to add some symlinks to system libraries. For example, the development software expect a library C<libm.so> that normally is a symlink to C<libm.so.6>. Synology only provides the latter and not the symlink. Here the actual architecture of the Synology system matters. You have to find out where the gcc libraries have been installed. Look in /opt for a directory similar to arm-none-linux-gnueab or powerpc-linux-gnuspe. In the instructions below I'll use powerpc-linux-gnuspe as an example. =over 4 =item * On the DSM management page start the Control Panel. =item * Click Terminal, and enable SSH service. =item * Close Terminal and the Control Panel. =item * Open a shell on the Synology using ssh and become root. =item * Execute the following commands: cd /lib ln -s libm.so.6 libm.so ln -s libcrypt.so.1 libcrypt.so ln -s libdl.so.2 libdl.so cd /opt/powerpc-linux-gnuspe/lib (or /opt/arm-none-linux-gnueabi/lib) ln -s /lib/libdl.so.2 libdl.so =back B<WARNING:> When you perform a system software upgrade, these links will disappear and need to be re-established. =head3 DSM 6 Using iPkg has been deprecated on DSM 6, but an alternative is available for DSM 6: entware/opkg. For instructions on how to use that, please read L<Install Entware-ng on Synology NAS|https://github.com/Entware-ng/Entware-ng/wiki/Install-on-Synology-NAS> That sadly does not (yet) work on QorIQ. At the moment of writing, the supported architectures are armv5, armv7, mipsel, wl500g, x86_32, and x86_64. Check L<here|https://pkg.entware.net/binaries/> for supported platforms. Entware-ng comes with a precompiled 5.24.1 (June 2017) that allowes building shared XS code. Note that this installation does B<not> use a site_perl folder. The available C<cpan> works. If all required development packages are installed too, also for XS. =head2 Compiling Perl 5 When the build environment has been set up, building and testing Perl is straightforward. The only thing you need to do is download the sources as usual, and add a file Policy.sh as follows: # Administrivia. perladmin="your.email@goes.here" # Install Perl in a tree in /opt/perl instead of /opt/bin. prefix=/opt/perl # Select the compiler. Note that there is no 'cc' alias or link. cc=gcc # Build flags. ccflags="-DDEBUGGING" # Library and include paths. libpth="/lib" locincpth="/opt/include" loclibpth="/lib" You may want to create the destination directory and give it the right permissions before installing, thus eliminating the need to build Perl as a super user. In the directory where you unpacked the sources, issue the familiar commands: ./Configure -des make make test make install =head2 Known problems =head3 Configure No known problems yet =head3 Build =over 4 =item Error message "No error definitions found". This error is generated when it is not possible to find the local definitions for error codes, due to the uncommon structure of the Synology file system. This error was fixed in the Perl development git for version 5.19, commit 7a8f1212e5482613c8a5b0402528e3105b26ff24. =back =head3 Failing tests =over 4 =item F<ext/DynaLoader/t/DynaLoader.t> One subtest fails due to the uncommon structure of the Synology file system. The file F</lib/glibc.so> is missing. B<WARNING:> Do not symlink F</lib/glibc.so.6> to F</lib/glibc.so> or some system components will start to fail. =back =head2 Smoke testing Perl 5 If building completes successfully, you can set up smoke testing as described in the Test::Smoke documentation. For smoke testing you need a running Perl. You can either install the Synology supplied package for Perl 5.8.6, or build and install your own, much more recent version. Note that I could not run successful smokes when initiated by the Synology Task Scheduler. I resorted to initiating the smokes via a cron job run on another system, using ssh: ssh nas1 wrk/Test-Smoke/smoke/smokecurrent.sh =head3 Local patches When local patches are applied with smoke testing, the test driver will automatically request regeneration of certain tables after the patches are applied. The Synology supplied Perl 5.8.6 (at least on the DS413) B<is NOT capable> of generating these tables. It will generate opcodes with bogus values, causing the build to fail. You can prevent regeneration by adding the setting 'flags' => 0, to the smoke config, or by adding another patch that inserts exit 0 if $] == 5.008006; in the beginning of the C<regen.pl> program. =head2 Adding libraries The above procedure describes a basic environment and hence results in a basic Perl. If you want to add additional libraries to Perl, you may need some extra settings. For example, the basic Perl does not have any of the DB libraries (db, dbm, ndbm, gdsm). You can add these using iPKGui, however, you need to set environment variable LD_LIBRARY_PATH to the appropriate value: LD_LIBRARY_PATH=/lib:/opt/lib export LD_LIBRARY_PATH This setting needs to be in effect while Perl is built, but also when the programs are run. =head1 REVISION June 2017, for Synology DSM 5.1.5022 and DSM 6.1-15101-4. =head1 AUTHOR Johan Vromans <jvromans@squirrel.nl> H. Merijn Brand <h.m.brand@xs4all.nl> =cut perlapio.pod 0000644 00000051530 15125556335 0007101 0 ustar 00 =head1 NAME perlapio - perl's IO abstraction interface. =head1 SYNOPSIS #define PERLIO_NOT_STDIO 0 /* For co-existence with stdio only */ #include <perlio.h> /* Usually via #include <perl.h> */ PerlIO *PerlIO_stdin(void); PerlIO *PerlIO_stdout(void); PerlIO *PerlIO_stderr(void); PerlIO *PerlIO_open(const char *path,const char *mode); PerlIO *PerlIO_fdopen(int fd, const char *mode); PerlIO *PerlIO_reopen(const char *path, /* deprecated */ const char *mode, PerlIO *old); int PerlIO_close(PerlIO *f); int PerlIO_stdoutf(const char *fmt,...) int PerlIO_puts(PerlIO *f,const char *string); int PerlIO_putc(PerlIO *f,int ch); SSize_t PerlIO_write(PerlIO *f,const void *buf,size_t numbytes); int PerlIO_printf(PerlIO *f, const char *fmt,...); int PerlIO_vprintf(PerlIO *f, const char *fmt, va_list args); int PerlIO_flush(PerlIO *f); int PerlIO_eof(PerlIO *f); int PerlIO_error(PerlIO *f); void PerlIO_clearerr(PerlIO *f); int PerlIO_getc(PerlIO *d); int PerlIO_ungetc(PerlIO *f,int ch); SSize_t PerlIO_read(PerlIO *f, void *buf, size_t numbytes); int PerlIO_fileno(PerlIO *f); void PerlIO_setlinebuf(PerlIO *f); Off_t PerlIO_tell(PerlIO *f); int PerlIO_seek(PerlIO *f, Off_t offset, int whence); void PerlIO_rewind(PerlIO *f); int PerlIO_getpos(PerlIO *f, SV *save); /* prototype changed */ int PerlIO_setpos(PerlIO *f, SV *saved); /* prototype changed */ int PerlIO_fast_gets(PerlIO *f); int PerlIO_has_cntptr(PerlIO *f); SSize_t PerlIO_get_cnt(PerlIO *f); char *PerlIO_get_ptr(PerlIO *f); void PerlIO_set_ptrcnt(PerlIO *f, char *ptr, SSize_t count); int PerlIO_canset_cnt(PerlIO *f); /* deprecated */ void PerlIO_set_cnt(PerlIO *f, int count); /* deprecated */ int PerlIO_has_base(PerlIO *f); char *PerlIO_get_base(PerlIO *f); SSize_t PerlIO_get_bufsiz(PerlIO *f); PerlIO *PerlIO_importFILE(FILE *stdio, const char *mode); FILE *PerlIO_exportFILE(PerlIO *f, const char *mode); FILE *PerlIO_findFILE(PerlIO *f); void PerlIO_releaseFILE(PerlIO *f,FILE *stdio); int PerlIO_apply_layers(PerlIO *f, const char *mode, const char *layers); int PerlIO_binmode(PerlIO *f, int ptype, int imode, const char *layers); void PerlIO_debug(const char *fmt,...); =for apidoc Amh|int |PerlIO_apply_layers|PerlIO *f|const char *mode|const char *layers =for apidoc Amh|int |PerlIO_binmode|PerlIO *f|int ptype|int imode|const char *layers =for apidoc ATmh|int |PerlIO_canset_cnt|PerlIO *f =for apidoc Amh|void |PerlIO_debug|const char *fmt|... =for apidoc ATmh|FILE *|PerlIO_exportFILE|PerlIO *f|const char *mode =for apidoc ATmh|int |PerlIO_fast_gets|PerlIO *f =for apidoc ATmh|PerlIO*|PerlIO_fdopen|int fd|const char *mode =for apidoc ATmh|FILE *|PerlIO_findFILE|PerlIO *f =for apidoc ATmh|int |PerlIO_getc|PerlIO *d =for apidoc ATmh|int |PerlIO_getpos|PerlIO *f|SV *save =for apidoc ATmh|int |PerlIO_has_base|PerlIO *f =for apidoc ATmh|int |PerlIO_has_cntptr|PerlIO *f =for apidoc ATmh|PerlIO*|PerlIO_importFILE|FILE *stdio|const char *mode =for apidoc ATmh|PerlIO*|PerlIO_open|const char *path|const char *mode =for apidoc Amh|int |PerlIO_printf|PerlIO *f|const char *fmt|... =for apidoc ATmh|int |PerlIO_putc|PerlIO *f|int ch =for apidoc ATmh|int |PerlIO_puts|PerlIO *f|const char *string =for apidoc ATmh|void |PerlIO_releaseFILE|PerlIO *f|FILE *stdio =for apidoc Amh|PerlIO *|PerlIO_reopen|const char *path|const char *mode|PerlIO *old =for apidoc ATmh|void |PerlIO_rewind|PerlIO *f =for apidoc ATmh|int |PerlIO_setpos|PerlIO *f|SV *saved =for apidoc Amh|int |PerlIO_stdoutf|const char *fmt|... =for apidoc ATmh|int |PerlIO_ungetc|PerlIO *f|int ch =for apidoc ATmh|int |PerlIO_vprintf|PerlIO *f|const char *fmt|va_list args =for apidoc PerlIO_stdin =for apidoc PerlIO_stdout =for apidoc PerlIO_stderr =for apidoc PerlIO_close =for apidoc PerlIO_write =for apidoc PerlIO_flush =for apidoc PerlIO_eof =for apidoc PerlIO_error =for apidoc PerlIO_clearerr =for apidoc PerlIO_read =for apidoc PerlIO_fileno =for apidoc PerlIO_setlinebuf =for apidoc PerlIO_tell =for apidoc PerlIO_seek =for apidoc PerlIO_get_cnt =for apidoc PerlIO_get_ptr =for apidoc PerlIO_set_ptrcnt =for apidoc PerlIO_set_cnt =for apidoc PerlIO_get_base =for apidoc PerlIO_get_bufsiz =head1 DESCRIPTION Perl's source code, and extensions that want maximum portability, should use the above functions instead of those defined in ANSI C's I<stdio.h>. The perl headers (in particular "perlio.h") will C<#define> them to the I/O mechanism selected at Configure time. The functions are modeled on those in I<stdio.h>, but parameter order has been "tidied up a little". C<PerlIO *> takes the place of FILE *. Like FILE * it should be treated as opaque (it is probably safe to assume it is a pointer to something). There are currently two implementations: =over 4 =item 1. USE_STDIO All above are #define'd to stdio functions or are trivial wrapper functions which call stdio. In this case I<only> PerlIO * is a FILE *. This has been the default implementation since the abstraction was introduced in perl5.003_02. =item 2. USE_PERLIO Introduced just after perl5.7.0, this is a re-implementation of the above abstraction which allows perl more control over how IO is done as it decouples IO from the way the operating system and C library choose to do things. For USE_PERLIO PerlIO * has an extra layer of indirection - it is a pointer-to-a-pointer. This allows the PerlIO * to remain with a known value while swapping the implementation around underneath I<at run time>. In this case all the above are true (but very simple) functions which call the underlying implementation. This is the only implementation for which C<PerlIO_apply_layers()> does anything "interesting". The USE_PERLIO implementation is described in L<perliol>. =back Because "perlio.h" is a thin layer (for efficiency) the semantics of these functions are somewhat dependent on the underlying implementation. Where these variations are understood they are noted below. Unless otherwise noted, functions return 0 on success, or a negative value (usually C<EOF> which is usually -1) and set C<errno> on error. =over 4 =item B<PerlIO_stdin()>, B<PerlIO_stdout()>, B<PerlIO_stderr()> Use these rather than C<stdin>, C<stdout>, C<stderr>. They are written to look like "function calls" rather than variables because this makes it easier to I<make them> function calls if platform cannot export data to loaded modules, or if (say) different "threads" might have different values. =item B<PerlIO_open(path, mode)>, B<PerlIO_fdopen(fd,mode)> These correspond to fopen()/fdopen() and the arguments are the same. Return C<NULL> and set C<errno> if there is an error. There may be an implementation limit on the number of open handles, which may be lower than the limit on the number of open files - C<errno> may not be set when C<NULL> is returned if this limit is exceeded. =item B<PerlIO_reopen(path,mode,f)> While this currently exists in both implementations, perl itself does not use it. I<As perl does not use it, it is not well tested.> Perl prefers to C<dup> the new low-level descriptor to the descriptor used by the existing PerlIO. This may become the behaviour of this function in the future. =item B<PerlIO_printf(f,fmt,...)>, B<PerlIO_vprintf(f,fmt,a)> These are fprintf()/vfprintf() equivalents. =item B<PerlIO_stdoutf(fmt,...)> This is printf() equivalent. printf is #defined to this function, so it is (currently) legal to use C<printf(fmt,...)> in perl sources. =item B<PerlIO_read(f,buf,count)>, B<PerlIO_write(f,buf,count)> These correspond functionally to fread() and fwrite() but the arguments and return values are different. The PerlIO_read() and PerlIO_write() signatures have been modeled on the more sane low level read() and write() functions instead: The "file" argument is passed first, there is only one "count", and the return value can distinguish between error and C<EOF>. Returns a byte count if successful (which may be zero or positive), returns negative value and sets C<errno> on error. Depending on implementation C<errno> may be C<EINTR> if operation was interrupted by a signal. =item B<PerlIO_close(f)> Depending on implementation C<errno> may be C<EINTR> if operation was interrupted by a signal. =item B<PerlIO_puts(f,s)>, B<PerlIO_putc(f,c)> These correspond to fputs() and fputc(). Note that arguments have been revised to have "file" first. =item B<PerlIO_ungetc(f,c)> This corresponds to ungetc(). Note that arguments have been revised to have "file" first. Arranges that next read operation will return the byte B<c>. Despite the implied "character" in the name only values in the range 0..0xFF are defined. Returns the byte B<c> on success or -1 (C<EOF>) on error. The number of bytes that can be "pushed back" may vary, only 1 character is certain, and then only if it is the last character that was read from the handle. =item B<PerlIO_getc(f)> This corresponds to getc(). Despite the c in the name only byte range 0..0xFF is supported. Returns the character read or -1 (C<EOF>) on error. =item B<PerlIO_eof(f)> This corresponds to feof(). Returns a true/false indication of whether the handle is at end of file. For terminal devices this may or may not be "sticky" depending on the implementation. The flag is cleared by PerlIO_seek(), or PerlIO_rewind(). =item B<PerlIO_error(f)> This corresponds to ferror(). Returns a true/false indication of whether there has been an IO error on the handle. =item B<PerlIO_fileno(f)> This corresponds to fileno(), note that on some platforms, the meaning of "fileno" may not match Unix. Returns -1 if the handle has no open descriptor associated with it. =item B<PerlIO_clearerr(f)> This corresponds to clearerr(), i.e., clears 'error' and (usually) 'eof' flags for the "stream". Does not return a value. =item B<PerlIO_flush(f)> This corresponds to fflush(). Sends any buffered write data to the underlying file. If called with C<NULL> this may flush all open streams (or core dump with some USE_STDIO implementations). Calling on a handle open for read only, or on which last operation was a read of some kind may lead to undefined behaviour on some USE_STDIO implementations. The USE_PERLIO (layers) implementation tries to behave better: it flushes all open streams when passed C<NULL>, and attempts to retain data on read streams either in the buffer or by seeking the handle to the current logical position. =item B<PerlIO_seek(f,offset,whence)> This corresponds to fseek(). Sends buffered write data to the underlying file, or discards any buffered read data, then positions the file descriptor as specified by B<offset> and B<whence> (sic). This is the correct thing to do when switching between read and write on the same handle (see issues with PerlIO_flush() above). Offset is of type C<Off_t> which is a perl Configure value which may not be same as stdio's C<off_t>. =item B<PerlIO_tell(f)> This corresponds to ftell(). Returns the current file position, or (Off_t) -1 on error. May just return value system "knows" without making a system call or checking the underlying file descriptor (so use on shared file descriptors is not safe without a PerlIO_seek()). Return value is of type C<Off_t> which is a perl Configure value which may not be same as stdio's C<off_t>. =item B<PerlIO_getpos(f,p)>, B<PerlIO_setpos(f,p)> These correspond (loosely) to fgetpos() and fsetpos(). Rather than stdio's Fpos_t they expect a "Perl Scalar Value" to be passed. What is stored there should be considered opaque. The layout of the data may vary from handle to handle. When not using stdio or if platform does not have the stdio calls then they are implemented in terms of PerlIO_tell() and PerlIO_seek(). =item B<PerlIO_rewind(f)> This corresponds to rewind(). It is usually defined as being PerlIO_seek(f,(Off_t)0L, SEEK_SET); PerlIO_clearerr(f); =item B<PerlIO_tmpfile()> This corresponds to tmpfile(), i.e., returns an anonymous PerlIO or NULL on error. The system will attempt to automatically delete the file when closed. On Unix the file is usually C<unlink>-ed just after it is created so it does not matter how it gets closed. On other systems the file may only be deleted if closed via PerlIO_close() and/or the program exits via C<exit>. Depending on the implementation there may be "race conditions" which allow other processes access to the file, though in general it will be safer in this regard than ad. hoc. schemes. =item B<PerlIO_setlinebuf(f)> This corresponds to setlinebuf(). Does not return a value. What constitutes a "line" is implementation dependent but usually means that writing "\n" flushes the buffer. What happens with things like "this\nthat" is uncertain. (Perl core uses it I<only> when "dumping"; it has nothing to do with $| auto-flush.) =back =head2 Co-existence with stdio There is outline support for co-existence of PerlIO with stdio. Obviously if PerlIO is implemented in terms of stdio there is no problem. However in other cases then mechanisms must exist to create a FILE * which can be passed to library code which is going to use stdio calls. The first step is to add this line: #define PERLIO_NOT_STDIO 0 I<before> including any perl header files. (This will probably become the default at some point). That prevents "perlio.h" from attempting to #define stdio functions onto PerlIO functions. XS code is probably better using "typemap" if it expects FILE * arguments. The standard typemap will be adjusted to comprehend any changes in this area. =over 4 =item B<PerlIO_importFILE(f,mode)> Used to get a PerlIO * from a FILE *. The mode argument should be a string as would be passed to fopen/PerlIO_open. If it is NULL then - for legacy support - the code will (depending upon the platform and the implementation) either attempt to empirically determine the mode in which I<f> is open, or use "r+" to indicate a read/write stream. Once called the FILE * should I<ONLY> be closed by calling C<PerlIO_close()> on the returned PerlIO *. The PerlIO is set to textmode. Use PerlIO_binmode if this is not the desired mode. This is B<not> the reverse of PerlIO_exportFILE(). =item B<PerlIO_exportFILE(f,mode)> Given a PerlIO * create a 'native' FILE * suitable for passing to code expecting to be compiled and linked with ANSI C I<stdio.h>. The mode argument should be a string as would be passed to fopen/PerlIO_open. If it is NULL then - for legacy support - the FILE * is opened in same mode as the PerlIO *. The fact that such a FILE * has been 'exported' is recorded, (normally by pushing a new :stdio "layer" onto the PerlIO *), which may affect future PerlIO operations on the original PerlIO *. You should not call C<fclose()> on the file unless you call C<PerlIO_releaseFILE()> to disassociate it from the PerlIO *. (Do not use PerlIO_importFILE() for doing the disassociation.) Calling this function repeatedly will create a FILE * on each call (and will push an :stdio layer each time as well). =item B<PerlIO_releaseFILE(p,f)> Calling PerlIO_releaseFILE informs PerlIO that all use of FILE * is complete. It is removed from the list of 'exported' FILE *s, and the associated PerlIO * should revert to its original behaviour. Use this to disassociate a file from a PerlIO * that was associated using PerlIO_exportFILE(). =item B<PerlIO_findFILE(f)> Returns a native FILE * used by a stdio layer. If there is none, it will create one with PerlIO_exportFILE. In either case the FILE * should be considered as belonging to PerlIO subsystem and should only be closed by calling C<PerlIO_close()>. =back =head2 "Fast gets" Functions In addition to standard-like API defined so far above there is an "implementation" interface which allows perl to get at internals of PerlIO. The following calls correspond to the various FILE_xxx macros determined by Configure - or their equivalent in other implementations. This section is really of interest to only those concerned with detailed perl-core behaviour, implementing a PerlIO mapping or writing code which can make use of the "read ahead" that has been done by the IO system in the same way perl does. Note that any code that uses these interfaces must be prepared to do things the traditional way if a handle does not support them. =over 4 =item B<PerlIO_fast_gets(f)> Returns true if implementation has all the interfaces required to allow perl's C<sv_gets> to "bypass" normal IO mechanism. This can vary from handle to handle. PerlIO_fast_gets(f) = PerlIO_has_cntptr(f) && \ PerlIO_canset_cnt(f) && \ 'Can set pointer into buffer' =item B<PerlIO_has_cntptr(f)> Implementation can return pointer to current position in the "buffer" and a count of bytes available in the buffer. Do not use this - use PerlIO_fast_gets. =item B<PerlIO_get_cnt(f)> Return count of readable bytes in the buffer. Zero or negative return means no more bytes available. =item B<PerlIO_get_ptr(f)> Return pointer to next readable byte in buffer, accessing via the pointer (dereferencing) is only safe if PerlIO_get_cnt() has returned a positive value. Only positive offsets up to value returned by PerlIO_get_cnt() are allowed. =item B<PerlIO_set_ptrcnt(f,p,c)> Set pointer into buffer, and a count of bytes still in the buffer. Should be used only to set pointer to within range implied by previous calls to C<PerlIO_get_ptr> and C<PerlIO_get_cnt>. The two values I<must> be consistent with each other (implementation may only use one or the other or may require both). =item B<PerlIO_canset_cnt(f)> Implementation can adjust its idea of number of bytes in the buffer. Do not use this - use PerlIO_fast_gets. =item B<PerlIO_set_cnt(f,c)> Obscure - set count of bytes in the buffer. Deprecated. Only usable if PerlIO_canset_cnt() returns true. Currently used in only doio.c to force count less than -1 to -1. Perhaps should be PerlIO_set_empty or similar. This call may actually do nothing if "count" is deduced from pointer and a "limit". Do not use this - use PerlIO_set_ptrcnt(). =item B<PerlIO_has_base(f)> Returns true if implementation has a buffer, and can return pointer to whole buffer and its size. Used by perl for B<-T> / B<-B> tests. Other uses would be very obscure... =item B<PerlIO_get_base(f)> Return I<start> of buffer. Access only positive offsets in the buffer up to the value returned by PerlIO_get_bufsiz(). =item B<PerlIO_get_bufsiz(f)> Return the I<total number of bytes> in the buffer, this is neither the number that can be read, nor the amount of memory allocated to the buffer. Rather it is what the operating system and/or implementation happened to C<read()> (or whatever) last time IO was requested. =back =head2 Other Functions =over 4 =item PerlIO_apply_layers(f,mode,layers) The new interface to the USE_PERLIO implementation. The layers ":crlf" and ":raw" are only ones allowed for other implementations and those are silently ignored. (As of perl5.8 ":raw" is deprecated.) Use PerlIO_binmode() below for the portable case. =item PerlIO_binmode(f,ptype,imode,layers) The hook used by perl's C<binmode> operator. B<ptype> is perl's character for the kind of IO: =over 8 =item 'E<lt>' read =item 'E<gt>' write =item '+' read/write =back B<imode> is C<O_BINARY> or C<O_TEXT>. B<layers> is a string of layers to apply, only ":crlf" makes sense in the non USE_PERLIO case. (As of perl5.8 ":raw" is deprecated in favour of passing NULL.) Portable cases are: PerlIO_binmode(f,ptype,O_BINARY,NULL); and PerlIO_binmode(f,ptype,O_TEXT,":crlf"); On Unix these calls probably have no effect whatsoever. Elsewhere they alter "\n" to CR,LF translation and possibly cause a special text "end of file" indicator to be written or honoured on read. The effect of making the call after doing any IO to the handle depends on the implementation. (It may be ignored, affect any data which is already buffered as well, or only apply to subsequent data.) =item PerlIO_debug(fmt,...) PerlIO_debug is a printf()-like function which can be used for debugging. No return value. Its main use is inside PerlIO where using real printf, warn() etc. would recursively call PerlIO and be a problem. PerlIO_debug writes to the file named by $ENV{'PERLIO_DEBUG'} or defaults to stderr if the environment variable is not defined. Typical use might be Bourne shells (sh, ksh, bash, zsh, ash, ...): PERLIO_DEBUG=/tmp/perliodebug.log ./perl -Di somescript some args Csh/Tcsh: setenv PERLIO_DEBUG /tmp/perliodebug.log ./perl -Di somescript some args If you have the "env" utility: env PERLIO_DEBUG=/tmp/perliodebug.log ./perl -Di somescript args Win32: set PERLIO_DEBUG=perliodebug.log perl -Di somescript some args On a Perl built without C<-DDEBUGGING>, or when the C<-Di> command-line switch is not specified, or under taint, PerlIO_debug() is a no-op. =back perlfreebsd.pod 0000644 00000003127 15125556335 0007562 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specifically designed to be readable as is. =head1 NAME perlfreebsd - Perl version 5 on FreeBSD systems =head1 DESCRIPTION This document describes various features of FreeBSD that will affect how Perl version 5 (hereafter just Perl) is compiled and/or runs. =head2 FreeBSD core dumps from readdir_r with ithreads When perl is configured to use ithreads, it will use re-entrant library calls in preference to non-re-entrant versions. There is a bug in FreeBSD's C<readdir_r> function in versions 4.5 and earlier that can cause a SEGV when reading large directories. A patch for FreeBSD libc is available (see L<http://www.freebsd.org/cgi/query-pr.cgi?pr=misc/30631> ) which has been integrated into FreeBSD 4.6. =head2 C<$^X> doesn't always contain a full path in FreeBSD perl sets C<$^X> where possible to a full path by asking the operating system. On FreeBSD the full path of the perl interpreter is found by using C<sysctl> with C<KERN_PROC_PATHNAME> if that is supported, else by reading the symlink F</proc/curproc/file>. FreeBSD 7 and earlier has a bug where either approach sometimes returns an incorrect value (see L<http://www.freebsd.org/cgi/query-pr.cgi?pr=35703> ). In these cases perl will fall back to the old behaviour of using C's C<argv[0]> value for C<$^X>. =head1 AUTHOR Nicholas Clark <nick@ccl4.org>, collating wisdom supplied by Slaven Rezic and Tim Bunce. Please report any errors, updates, or suggestions to L<https://github.com/Perl/perl5/issues>. perlunicook.pod 0000644 00000062072 15125556335 0007623 0 ustar 00 =encoding utf8 =head1 NAME perlunicook - cookbookish examples of handling Unicode in Perl =head1 DESCRIPTION This manpage contains short recipes demonstrating how to handle common Unicode operations in Perl, plus one complete program at the end. Any undeclared variables in individual recipes are assumed to have a previous appropriate value in them. =head1 EXAMPLES =head2 ℞ 0: Standard preamble Unless otherwise notes, all examples below require this standard preamble to work correctly, with the C<#!> adjusted to work on your system: #!/usr/bin/env perl use utf8; # so literals and identifiers can be in UTF-8 use v5.12; # or later to get "unicode_strings" feature use strict; # quote strings, declare variables use warnings; # on by default use warnings qw(FATAL utf8); # fatalize encoding glitches use open qw(:std :encoding(UTF-8)); # undeclared streams in UTF-8 use charnames qw(:full :short); # unneeded in v5.16 This I<does> make even Unix programmers C<binmode> your binary streams, or open them with C<:raw>, but that's the only way to get at them portably anyway. B<WARNING>: C<use autodie> (pre 2.26) and C<use open> do not get along with each other. =head2 ℞ 1: Generic Unicode-savvy filter Always decompose on the way in, then recompose on the way out. use Unicode::Normalize; while (<>) { $_ = NFD($_); # decompose + reorder canonically ... } continue { print NFC($_); # recompose (where possible) + reorder canonically } =head2 ℞ 2: Fine-tuning Unicode warnings As of v5.14, Perl distinguishes three subclasses of UTF‑8 warnings. use v5.14; # subwarnings unavailable any earlier no warnings "nonchar"; # the 66 forbidden non-characters no warnings "surrogate"; # UTF-16/CESU-8 nonsense no warnings "non_unicode"; # for codepoints over 0x10_FFFF =head2 ℞ 3: Declare source in utf8 for identifiers and literals Without the all-critical C<use utf8> declaration, putting UTF‑8 in your literals and identifiers won’t work right. If you used the standard preamble just given above, this already happened. If you did, you can do things like this: use utf8; my $measure = "Ångström"; my @μsoft = qw( cp852 cp1251 cp1252 ); my @ὑπέρμεγας = qw( ὑπέρ μεγας ); my @鯉 = qw( koi8-f koi8-u koi8-r ); my $motto = "👪 💗 🐪"; # FAMILY, GROWING HEART, DROMEDARY CAMEL If you forget C<use utf8>, high bytes will be misunderstood as separate characters, and nothing will work right. =head2 ℞ 4: Characters and their numbers The C<ord> and C<chr> functions work transparently on all codepoints, not just on ASCII alone — nor in fact, not even just on Unicode alone. # ASCII characters ord("A") chr(65) # characters from the Basic Multilingual Plane ord("Σ") chr(0x3A3) # beyond the BMP ord("𝑛") # MATHEMATICAL ITALIC SMALL N chr(0x1D45B) # beyond Unicode! (up to MAXINT) ord("\x{20_0000}") chr(0x20_0000) =head2 ℞ 5: Unicode literals by character number In an interpolated literal, whether a double-quoted string or a regex, you may specify a character by its number using the C<\x{I<HHHHHH>}> escape. String: "\x{3a3}" Regex: /\x{3a3}/ String: "\x{1d45b}" Regex: /\x{1d45b}/ # even non-BMP ranges in regex work fine /[\x{1D434}-\x{1D467}]/ =head2 ℞ 6: Get character name by number use charnames (); my $name = charnames::viacode(0x03A3); =head2 ℞ 7: Get character number by name use charnames (); my $number = charnames::vianame("GREEK CAPITAL LETTER SIGMA"); =head2 ℞ 8: Unicode named characters Use the C<< \N{I<charname>} >> notation to get the character by that name for use in interpolated literals (double-quoted strings and regexes). In v5.16, there is an implicit use charnames qw(:full :short); But prior to v5.16, you must be explicit about which set of charnames you want. The C<:full> names are the official Unicode character name, alias, or sequence, which all share a namespace. use charnames qw(:full :short latin greek); "\N{MATHEMATICAL ITALIC SMALL N}" # :full "\N{GREEK CAPITAL LETTER SIGMA}" # :full Anything else is a Perl-specific convenience abbreviation. Specify one or more scripts by names if you want short names that are script-specific. "\N{Greek:Sigma}" # :short "\N{ae}" # latin "\N{epsilon}" # greek The v5.16 release also supports a C<:loose> import for loose matching of character names, which works just like loose matching of property names: that is, it disregards case, whitespace, and underscores: "\N{euro sign}" # :loose (from v5.16) Starting in v5.32, you can also use qr/\p{name=euro sign}/ to get official Unicode named characters in regular expressions. Loose matching is always done for these. =head2 ℞ 9: Unicode named sequences These look just like character names but return multiple codepoints. Notice the C<%vx> vector-print functionality in C<printf>. use charnames qw(:full); my $seq = "\N{LATIN CAPITAL LETTER A WITH MACRON AND GRAVE}"; printf "U+%v04X\n", $seq; U+0100.0300 =head2 ℞ 10: Custom named characters Use C<:alias> to give your own lexically scoped nicknames to existing characters, or even to give unnamed private-use characters useful names. use charnames ":full", ":alias" => { ecute => "LATIN SMALL LETTER E WITH ACUTE", "APPLE LOGO" => 0xF8FF, # private use character }; "\N{ecute}" "\N{APPLE LOGO}" =head2 ℞ 11: Names of CJK codepoints Sinograms like “東京” come back with character names of C<CJK UNIFIED IDEOGRAPH-6771> and C<CJK UNIFIED IDEOGRAPH-4EAC>, because their “names” vary. The CPAN C<Unicode::Unihan> module has a large database for decoding these (and a whole lot more), provided you know how to understand its output. # cpan -i Unicode::Unihan use Unicode::Unihan; my $str = "東京"; my $unhan = Unicode::Unihan->new; for my $lang (qw(Mandarin Cantonese Korean JapaneseOn JapaneseKun)) { printf "CJK $str in %-12s is ", $lang; say $unhan->$lang($str); } prints: CJK 東京 in Mandarin is DONG1JING1 CJK 東京 in Cantonese is dung1ging1 CJK 東京 in Korean is TONGKYENG CJK 東京 in JapaneseOn is TOUKYOU KEI KIN CJK 東京 in JapaneseKun is HIGASHI AZUMAMIYAKO If you have a specific romanization scheme in mind, use the specific module: # cpan -i Lingua::JA::Romanize::Japanese use Lingua::JA::Romanize::Japanese; my $k2r = Lingua::JA::Romanize::Japanese->new; my $str = "東京"; say "Japanese for $str is ", $k2r->chars($str); prints Japanese for 東京 is toukyou =head2 ℞ 12: Explicit encode/decode On rare occasion, such as a database read, you may be given encoded text you need to decode. use Encode qw(encode decode); my $chars = decode("shiftjis", $bytes, 1); # OR my $bytes = encode("MIME-Header-ISO_2022_JP", $chars, 1); For streams all in the same encoding, don't use encode/decode; instead set the file encoding when you open the file or immediately after with C<binmode> as described later below. =head2 ℞ 13: Decode program arguments as utf8 $ perl -CA ... or $ export PERL_UNICODE=A or use Encode qw(decode); @ARGV = map { decode('UTF-8', $_, 1) } @ARGV; =head2 ℞ 14: Decode program arguments as locale encoding # cpan -i Encode::Locale use Encode qw(locale); use Encode::Locale; # use "locale" as an arg to encode/decode @ARGV = map { decode(locale => $_, 1) } @ARGV; =head2 ℞ 15: Declare STD{IN,OUT,ERR} to be utf8 Use a command-line option, an environment variable, or else call C<binmode> explicitly: $ perl -CS ... or $ export PERL_UNICODE=S or use open qw(:std :encoding(UTF-8)); or binmode(STDIN, ":encoding(UTF-8)"); binmode(STDOUT, ":utf8"); binmode(STDERR, ":utf8"); =head2 ℞ 16: Declare STD{IN,OUT,ERR} to be in locale encoding # cpan -i Encode::Locale use Encode; use Encode::Locale; # or as a stream for binmode or open binmode STDIN, ":encoding(console_in)" if -t STDIN; binmode STDOUT, ":encoding(console_out)" if -t STDOUT; binmode STDERR, ":encoding(console_out)" if -t STDERR; =head2 ℞ 17: Make file I/O default to utf8 Files opened without an encoding argument will be in UTF-8: $ perl -CD ... or $ export PERL_UNICODE=D or use open qw(:encoding(UTF-8)); =head2 ℞ 18: Make all I/O and args default to utf8 $ perl -CSDA ... or $ export PERL_UNICODE=SDA or use open qw(:std :encoding(UTF-8)); use Encode qw(decode); @ARGV = map { decode('UTF-8', $_, 1) } @ARGV; =head2 ℞ 19: Open file with specific encoding Specify stream encoding. This is the normal way to deal with encoded text, not by calling low-level functions. # input file open(my $in_file, "< :encoding(UTF-16)", "wintext"); OR open(my $in_file, "<", "wintext"); binmode($in_file, ":encoding(UTF-16)"); THEN my $line = <$in_file>; # output file open($out_file, "> :encoding(cp1252)", "wintext"); OR open(my $out_file, ">", "wintext"); binmode($out_file, ":encoding(cp1252)"); THEN print $out_file "some text\n"; More layers than just the encoding can be specified here. For example, the incantation C<":raw :encoding(UTF-16LE) :crlf"> includes implicit CRLF handling. =head2 ℞ 20: Unicode casing Unicode casing is very different from ASCII casing. uc("henry ⅷ") # "HENRY Ⅷ" uc("tschüß") # "TSCHÜSS" notice ß => SS # both are true: "tschüß" =~ /TSCHÜSS/i # notice ß => SS "Σίσυφος" =~ /ΣΊΣΥΦΟΣ/i # notice Σ,σ,ς sameness =head2 ℞ 21: Unicode case-insensitive comparisons Also available in the CPAN L<Unicode::CaseFold> module, the new C<fc> “foldcase” function from v5.16 grants access to the same Unicode casefolding as the C</i> pattern modifier has always used: use feature "fc"; # fc() function is from v5.16 # sort case-insensitively my @sorted = sort { fc($a) cmp fc($b) } @list; # both are true: fc("tschüß") eq fc("TSCHÜSS") fc("Σίσυφος") eq fc("ΣΊΣΥΦΟΣ") =head2 ℞ 22: Match Unicode linebreak sequence in regex A Unicode linebreak matches the two-character CRLF grapheme or any of seven vertical whitespace characters. Good for dealing with textfiles coming from different operating systems. \R s/\R/\n/g; # normalize all linebreaks to \n =head2 ℞ 23: Get character category Find the general category of a numeric codepoint. use Unicode::UCD qw(charinfo); my $cat = charinfo(0x3A3)->{category}; # "Lu" =head2 ℞ 24: Disabling Unicode-awareness in builtin charclasses Disable C<\w>, C<\b>, C<\s>, C<\d>, and the POSIX classes from working correctly on Unicode either in this scope, or in just one regex. use v5.14; use re "/a"; # OR my($num) = $str =~ /(\d+)/a; Or use specific un-Unicode properties, like C<\p{ahex}> and C<\p{POSIX_Digit>}. Properties still work normally no matter what charset modifiers (C</d /u /l /a /aa>) should be effect. =head2 ℞ 25: Match Unicode properties in regex with \p, \P These all match a single codepoint with the given property. Use C<\P> in place of C<\p> to match one codepoint lacking that property. \pL, \pN, \pS, \pP, \pM, \pZ, \pC \p{Sk}, \p{Ps}, \p{Lt} \p{alpha}, \p{upper}, \p{lower} \p{Latin}, \p{Greek} \p{script_extensions=Latin}, \p{scx=Greek} \p{East_Asian_Width=Wide}, \p{EA=W} \p{Line_Break=Hyphen}, \p{LB=HY} \p{Numeric_Value=4}, \p{NV=4} =head2 ℞ 26: Custom character properties Define at compile-time your own custom character properties for use in regexes. # using private-use characters sub In_Tengwar { "E000\tE07F\n" } if (/\p{In_Tengwar}/) { ... } # blending existing properties sub Is_GraecoRoman_Title {<<'END_OF_SET'} +utf8::IsLatin +utf8::IsGreek &utf8::IsTitle END_OF_SET if (/\p{Is_GraecoRoman_Title}/ { ... } =head2 ℞ 27: Unicode normalization Typically render into NFD on input and NFC on output. Using NFKC or NFKD functions improves recall on searches, assuming you've already done to the same text to be searched. Note that this is about much more than just pre- combined compatibility glyphs; it also reorders marks according to their canonical combining classes and weeds out singletons. use Unicode::Normalize; my $nfd = NFD($orig); my $nfc = NFC($orig); my $nfkd = NFKD($orig); my $nfkc = NFKC($orig); =head2 ℞ 28: Convert non-ASCII Unicode numerics Unless you’ve used C</a> or C</aa>, C<\d> matches more than ASCII digits only, but Perl’s implicit string-to-number conversion does not current recognize these. Here’s how to convert such strings manually. use v5.14; # needed for num() function use Unicode::UCD qw(num); my $str = "got Ⅻ and ४५६७ and ⅞ and here"; my @nums = (); while ($str =~ /(\d+|\N)/g) { # not just ASCII! push @nums, num($1); } say "@nums"; # 12 4567 0.875 use charnames qw(:full); my $nv = num("\N{RUMI DIGIT ONE}\N{RUMI DIGIT TWO}"); =head2 ℞ 29: Match Unicode grapheme cluster in regex Programmer-visible “characters” are codepoints matched by C</./s>, but user-visible “characters” are graphemes matched by C</\X/>. # Find vowel *plus* any combining diacritics,underlining,etc. my $nfd = NFD($orig); $nfd =~ / (?=[aeiou]) \X /xi =head2 ℞ 30: Extract by grapheme instead of by codepoint (regex) # match and grab five first graphemes my($first_five) = $str =~ /^ ( \X{5} ) /x; =head2 ℞ 31: Extract by grapheme instead of by codepoint (substr) # cpan -i Unicode::GCString use Unicode::GCString; my $gcs = Unicode::GCString->new($str); my $first_five = $gcs->substr(0, 5); =head2 ℞ 32: Reverse string by grapheme Reversing by codepoint messes up diacritics, mistakenly converting C<crème brûlée> into C<éel̂urb em̀erc> instead of into C<eélûrb emèrc>; so reverse by grapheme instead. Both these approaches work right no matter what normalization the string is in: $str = join("", reverse $str =~ /\X/g); # OR: cpan -i Unicode::GCString use Unicode::GCString; $str = reverse Unicode::GCString->new($str); =head2 ℞ 33: String length in graphemes The string C<brûlée> has six graphemes but up to eight codepoints. This counts by grapheme, not by codepoint: my $str = "brûlée"; my $count = 0; while ($str =~ /\X/g) { $count++ } # OR: cpan -i Unicode::GCString use Unicode::GCString; my $gcs = Unicode::GCString->new($str); my $count = $gcs->length; =head2 ℞ 34: Unicode column-width for printing Perl’s C<printf>, C<sprintf>, and C<format> think all codepoints take up 1 print column, but many take 0 or 2. Here to show that normalization makes no difference, we print out both forms: use Unicode::GCString; use Unicode::Normalize; my @words = qw/crème brûlée/; @words = map { NFC($_), NFD($_) } @words; for my $str (@words) { my $gcs = Unicode::GCString->new($str); my $cols = $gcs->columns; my $pad = " " x (10 - $cols); say str, $pad, " |"; } generates this to show that it pads correctly no matter the normalization: crème | crème | brûlée | brûlée | =head2 ℞ 35: Unicode collation Text sorted by numeric codepoint follows no reasonable alphabetic order; use the UCA for sorting text. use Unicode::Collate; my $col = Unicode::Collate->new(); my @list = $col->sort(@old_list); See the I<ucsort> program from the L<Unicode::Tussle> CPAN module for a convenient command-line interface to this module. =head2 ℞ 36: Case- I<and> accent-insensitive Unicode sort Specify a collation strength of level 1 to ignore case and diacritics, only looking at the basic character. use Unicode::Collate; my $col = Unicode::Collate->new(level => 1); my @list = $col->sort(@old_list); =head2 ℞ 37: Unicode locale collation Some locales have special sorting rules. # either use v5.12, OR: cpan -i Unicode::Collate::Locale use Unicode::Collate::Locale; my $col = Unicode::Collate::Locale->new(locale => "de__phonebook"); my @list = $col->sort(@old_list); The I<ucsort> program mentioned above accepts a C<--locale> parameter. =head2 ℞ 38: Making C<cmp> work on text instead of codepoints Instead of this: @srecs = sort { $b->{AGE} <=> $a->{AGE} || $a->{NAME} cmp $b->{NAME} } @recs; Use this: my $coll = Unicode::Collate->new(); for my $rec (@recs) { $rec->{NAME_key} = $coll->getSortKey( $rec->{NAME} ); } @srecs = sort { $b->{AGE} <=> $a->{AGE} || $a->{NAME_key} cmp $b->{NAME_key} } @recs; =head2 ℞ 39: Case- I<and> accent-insensitive comparisons Use a collator object to compare Unicode text by character instead of by codepoint. use Unicode::Collate; my $es = Unicode::Collate->new( level => 1, normalization => undef ); # now both are true: $es->eq("García", "GARCIA" ); $es->eq("Márquez", "MARQUEZ"); =head2 ℞ 40: Case- I<and> accent-insensitive locale comparisons Same, but in a specific locale. my $de = Unicode::Collate::Locale->new( locale => "de__phonebook", ); # now this is true: $de->eq("tschüß", "TSCHUESS"); # notice ü => UE, ß => SS =head2 ℞ 41: Unicode linebreaking Break up text into lines according to Unicode rules. # cpan -i Unicode::LineBreak use Unicode::LineBreak; use charnames qw(:full); my $para = "This is a super\N{HYPHEN}long string. " x 20; my $fmt = Unicode::LineBreak->new; print $fmt->break($para), "\n"; =head2 ℞ 42: Unicode text in DBM hashes, the tedious way Using a regular Perl string as a key or value for a DBM hash will trigger a wide character exception if any codepoints won’t fit into a byte. Here’s how to manually manage the translation: use DB_File; use Encode qw(encode decode); tie %dbhash, "DB_File", "pathname"; # STORE # assume $uni_key and $uni_value are abstract Unicode strings my $enc_key = encode("UTF-8", $uni_key, 1); my $enc_value = encode("UTF-8", $uni_value, 1); $dbhash{$enc_key} = $enc_value; # FETCH # assume $uni_key holds a normal Perl string (abstract Unicode) my $enc_key = encode("UTF-8", $uni_key, 1); my $enc_value = $dbhash{$enc_key}; my $uni_value = decode("UTF-8", $enc_value, 1); =head2 ℞ 43: Unicode text in DBM hashes, the easy way Here’s how to implicitly manage the translation; all encoding and decoding is done automatically, just as with streams that have a particular encoding attached to them: use DB_File; use DBM_Filter; my $dbobj = tie %dbhash, "DB_File", "pathname"; $dbobj->Filter_Value("utf8"); # this is the magic bit # STORE # assume $uni_key and $uni_value are abstract Unicode strings $dbhash{$uni_key} = $uni_value; # FETCH # $uni_key holds a normal Perl string (abstract Unicode) my $uni_value = $dbhash{$uni_key}; =head2 ℞ 44: PROGRAM: Demo of Unicode collation and printing Here’s a full program showing how to make use of locale-sensitive sorting, Unicode casing, and managing print widths when some of the characters take up zero or two columns, not just one column each time. When run, the following program produces this nicely aligned output: Crème Brûlée....... €2.00 Éclair............. €1.60 Fideuà............. €4.20 Hamburger.......... €6.00 Jamón Serrano...... €4.45 Linguiça........... €7.00 Pâté............... €4.15 Pears.............. €2.00 Pêches............. €2.25 Smørbrød........... €5.75 Spätzle............ €5.50 Xoriço............. €3.00 Γύρος.............. €6.50 막걸리............. €4.00 おもち............. €2.65 お好み焼き......... €8.00 シュークリーム..... €1.85 寿司............... €9.99 包子............... €7.50 Here's that program; tested on v5.14. #!/usr/bin/env perl # umenu - demo sorting and printing of Unicode food # # (obligatory and increasingly long preamble) # use utf8; use v5.14; # for locale sorting use strict; use warnings; use warnings qw(FATAL utf8); # fatalize encoding faults use open qw(:std :encoding(UTF-8)); # undeclared streams in UTF-8 use charnames qw(:full :short); # unneeded in v5.16 # std modules use Unicode::Normalize; # std perl distro as of v5.8 use List::Util qw(max); # std perl distro as of v5.10 use Unicode::Collate::Locale; # std perl distro as of v5.14 # cpan modules use Unicode::GCString; # from CPAN # forward defs sub pad($$$); sub colwidth(_); sub entitle(_); my %price = ( "γύρος" => 6.50, # gyros "pears" => 2.00, # like um, pears "linguiça" => 7.00, # spicy sausage, Portuguese "xoriço" => 3.00, # chorizo sausage, Catalan "hamburger" => 6.00, # burgermeister meisterburger "éclair" => 1.60, # dessert, French "smørbrød" => 5.75, # sandwiches, Norwegian "spätzle" => 5.50, # Bayerisch noodles, little sparrows "包子" => 7.50, # bao1 zi5, steamed pork buns, Mandarin "jamón serrano" => 4.45, # country ham, Spanish "pêches" => 2.25, # peaches, French "シュークリーム" => 1.85, # cream-filled pastry like eclair "막걸리" => 4.00, # makgeolli, Korean rice wine "寿司" => 9.99, # sushi, Japanese "おもち" => 2.65, # omochi, rice cakes, Japanese "crème brûlée" => 2.00, # crema catalana "fideuà" => 4.20, # more noodles, Valencian # (Catalan=fideuada) "pâté" => 4.15, # gooseliver paste, French "お好み焼き" => 8.00, # okonomiyaki, Japanese ); my $width = 5 + max map { colwidth } keys %price; # So the Asian stuff comes out in an order that someone # who reads those scripts won't freak out over; the # CJK stuff will be in JIS X 0208 order that way. my $coll = Unicode::Collate::Locale->new(locale => "ja"); for my $item ($coll->sort(keys %price)) { print pad(entitle($item), $width, "."); printf " €%.2f\n", $price{$item}; } sub pad($$$) { my($str, $width, $padchar) = @_; return $str . ($padchar x ($width - colwidth($str))); } sub colwidth(_) { my($str) = @_; return Unicode::GCString->new($str)->columns; } sub entitle(_) { my($str) = @_; $str =~ s{ (?=\pL)(\S) (\S*) } { ucfirst($1) . lc($2) }xge; return $str; } =head1 SEE ALSO See these manpages, some of which are CPAN modules: L<perlunicode>, L<perluniprops>, L<perlre>, L<perlrecharclass>, L<perluniintro>, L<perlunitut>, L<perlunifaq>, L<PerlIO>, L<DB_File>, L<DBM_Filter>, L<DBM_Filter::utf8>, L<Encode>, L<Encode::Locale>, L<Unicode::UCD>, L<Unicode::Normalize>, L<Unicode::GCString>, L<Unicode::LineBreak>, L<Unicode::Collate>, L<Unicode::Collate::Locale>, L<Unicode::Unihan>, L<Unicode::CaseFold>, L<Unicode::Tussle>, L<Lingua::JA::Romanize::Japanese>, L<Lingua::ZH::Romanize::Pinyin>, L<Lingua::KO::Romanize::Hangul>. The L<Unicode::Tussle> CPAN module includes many programs to help with working with Unicode, including these programs to fully or partly replace standard utilities: I<tcgrep> instead of I<egrep>, I<uniquote> instead of I<cat -v> or I<hexdump>, I<uniwc> instead of I<wc>, I<unilook> instead of I<look>, I<unifmt> instead of I<fmt>, and I<ucsort> instead of I<sort>. For exploring Unicode character names and character properties, see its I<uniprops>, I<unichars>, and I<uninames> programs. It also supplies these programs, all of which are general filters that do Unicode-y things: I<unititle> and I<unicaps>; I<uniwide> and I<uninarrow>; I<unisupers> and I<unisubs>; I<nfd>, I<nfc>, I<nfkd>, and I<nfkc>; and I<uc>, I<lc>, and I<tc>. Finally, see the published Unicode Standard (page numbers are from version 6.0.0), including these specific annexes and technical reports: =over =item §3.13 Default Case Algorithms, page 113; §4.2 Case, pages 120–122; Case Mappings, page 166–172, especially Caseless Matching starting on page 170. =item UAX #44: Unicode Character Database =item UTS #18: Unicode Regular Expressions =item UAX #15: Unicode Normalization Forms =item UTS #10: Unicode Collation Algorithm =item UAX #29: Unicode Text Segmentation =item UAX #14: Unicode Line Breaking Algorithm =item UAX #11: East Asian Width =back =head1 AUTHOR Tom Christiansen E<lt>tchrist@perl.comE<gt> wrote this, with occasional kibbitzing from Larry Wall and Jeffrey Friedl in the background. =head1 COPYRIGHT AND LICENCE Copyright © 2012 Tom Christiansen. This program is free software; you may redistribute it and/or modify it under the same terms as Perl itself. Most of these examples taken from the current edition of the “Camel Book”; that is, from the 4ᵗʰ Edition of I<Programming Perl>, Copyright © 2012 Tom Christiansen <et al.>, 2012-02-13 by O’Reilly Media. The code itself is freely redistributable, and you are encouraged to transplant, fold, spindle, and mutilate any of the examples in this manpage however you please for inclusion into your own programs without any encumbrance whatsoever. Acknowledgement via code comment is polite but not required. =head1 REVISION HISTORY v1.0.0 – first public release, 2012-02-27 perlaix.pod 0000644 00000047726 15125556335 0006746 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specially designed to be readable as is. =head1 NAME perlaix - Perl version 5 on IBM AIX (UNIX) systems =head1 DESCRIPTION This document describes various features of IBM's UNIX operating system AIX that will affect how Perl version 5 (hereafter just Perl) is compiled and/or runs. =head2 Compiling Perl 5 on AIX For information on compilers on older versions of AIX, see L</Compiling Perl 5 on older AIX versions up to 4.3.3>. When compiling Perl, you must use an ANSI C compiler. AIX does not ship an ANSI compliant C compiler with AIX by default, but binary builds of gcc for AIX are widely available. A version of gcc is also included in the AIX Toolbox which is shipped with AIX. =head2 Supported Compilers Currently all versions of IBM's "xlc", "xlc_r", "cc", "cc_r" or "vac" ANSI/C compiler will work for building Perl if that compiler works on your system. If you plan to link Perl to any module that requires thread-support, like DBD::Oracle, it is better to use the _r version of the compiler. This will not build a threaded Perl, but a thread-enabled Perl. See also L</Threaded Perl> later on. As of writing (2010-09) only the I<IBM XL C for AIX> or I<IBM XL C/C++ for AIX> compiler is supported by IBM on AIX 5L/6.1/7.1. The following compiler versions are currently supported by IBM: IBM XL C and IBM XL C/C++ V8, V9, V10, V11 The XL C for AIX is integrated in the XL C/C++ for AIX compiler and therefore also supported. If you choose XL C/C++ V9 you need APAR IZ35785 installed otherwise the integrated SDBM_File do not compile correctly due to an optimization bug. You can circumvent this problem by adding -qipa to the optimization flags (-Doptimize='-O -qipa'). The PTF for APAR IZ35785 which solves this problem is available from IBM (April 2009 PTF for XL C/C++ Enterprise Edition for AIX, V9.0). If you choose XL C/C++ V11 you need the April 2010 PTF (or newer) installed otherwise you will not get a working Perl version. Perl can be compiled with either IBM's ANSI C compiler or with gcc. The former is recommended, as not only it can compile Perl with no difficulty, but also can take advantage of features listed later that require the use of IBM compiler-specific command-line flags. If you decide to use gcc, make sure your installation is recent and complete, and be sure to read the Perl INSTALL file for more gcc-specific details. Please report any hoops you had to jump through to the development team. =head2 Incompatibility with AIX Toolbox lib gdbm If the AIX Toolbox version of lib gdbm < 1.8.3-5 is installed on your system then Perl will not work. This library contains the header files /opt/freeware/include/gdbm/dbm.h|ndbm.h which conflict with the AIX system versions. The lib gdbm will be automatically removed from the wanted libraries if the presence of one of these two header files is detected. If you want to build Perl with GDBM support then please install at least gdbm-devel-1.8.3-5 (or higher). =head2 Perl 5 was successfully compiled and tested on: Perl | AIX Level | Compiler Level | w th | w/o th -------+---------------------+-------------------------+------+------- 5.12.2 |5.1 TL9 32 bit | XL C/C++ V7 | OK | OK 5.12.2 |5.1 TL9 64 bit | XL C/C++ V7 | OK | OK 5.12.2 |5.2 TL10 SP8 32 bit | XL C/C++ V8 | OK | OK 5.12.2 |5.2 TL10 SP8 32 bit | gcc 3.2.2 | OK | OK 5.12.2 |5.2 TL10 SP8 64 bit | XL C/C++ V8 | OK | OK 5.12.2 |5.3 TL8 SP8 32 bit | XL C/C++ V9 + IZ35785 | OK | OK 5.12.2 |5.3 TL8 SP8 32 bit | gcc 4.2.4 | OK | OK 5.12.2 |5.3 TL8 SP8 64 bit | XL C/C++ V9 + IZ35785 | OK | OK 5.12.2 |5.3 TL10 SP3 32 bit | XL C/C++ V11 + Apr 2010 | OK | OK 5.12.2 |5.3 TL10 SP3 64 bit | XL C/C++ V11 + Apr 2010 | OK | OK 5.12.2 |6.1 TL1 SP7 32 bit | XL C/C++ V10 | OK | OK 5.12.2 |6.1 TL1 SP7 64 bit | XL C/C++ V10 | OK | OK 5.13 |7.1 TL0 SP1 32 bit | XL C/C++ V11 + Jul 2010 | OK | OK 5.13 |7.1 TL0 SP1 64 bit | XL C/C++ V11 + Jul 2010 | OK | OK w th = with thread support w/o th = without thread support OK = tested Successfully tested means that all "make test" runs finish with a result of 100% OK. All tests were conducted with -Duseshrplib set. All tests were conducted on the oldest supported AIX technology level with the latest support package applied. If the tested AIX version is out of support (AIX 4.3.3, 5.1, 5.2) then the last available support level was used. =head2 Building Dynamic Extensions on AIX Starting from Perl 5.7.2 (and consequently 5.8.x / 5.10.x / 5.12.x) and AIX 4.3 or newer Perl uses the AIX native dynamic loading interface in the so called runtime linking mode instead of the emulated interface that was used in Perl releases 5.6.1 and earlier or, for AIX releases 4.2 and earlier. This change does break backward compatibility with compiled modules from earlier Perl releases. The change was made to make Perl more compliant with other applications like Apache/mod_perl which are using the AIX native interface. This change also enables the use of C++ code with static constructors and destructors in Perl extensions, which was not possible using the emulated interface. It is highly recommended to use the new interface. =head2 Using Large Files with Perl Should yield no problems. =head2 Threaded Perl Should yield no problems with AIX 5.1 / 5.2 / 5.3 / 6.1 / 7.1. IBM uses the AIX system Perl (V5.6.0 on AIX 5.1 and V5.8.2 on AIX 5.2 / 5.3 and 6.1; V5.8.8 on AIX 5.3 TL11 and AIX 6.1 TL4; V5.10.1 on AIX 7.1) for some AIX system scripts. If you switch the links in /usr/bin from the AIX system Perl (/usr/opt/perl5) to the newly build Perl then you get the same features as with the IBM AIX system Perl if the threaded options are used. The threaded Perl build works also on AIX 5.1 but the IBM Perl build (Perl v5.6.0) is not threaded on AIX 5.1. Perl 5.12 an newer is not compatible with the IBM fileset perl.libext. =head2 64-bit Perl If your AIX system is installed with 64-bit support, you can expect 64-bit configurations to work. If you want to use 64-bit Perl on AIX 6.1 you need an APAR for a libc.a bug which affects (n)dbm_XXX functions. The APAR number for this problem is IZ39077. If you need more memory (larger data segment) for your Perl programs you can set: /etc/security/limits default: (or your user) data = -1 (default is 262144 * 512 byte) With the default setting the size is limited to 128MB. The -1 removes this limit. If the "make test" fails please change your /etc/security/limits as stated above. =head2 Long doubles IBM calls its implementation of long doubles 128-bit, but it is not the IEEE 128-bit ("quadruple precision") which would give 116 bit of mantissa (nor it is implemented in hardware), instead it's a special software implementation called "double-double", which gives 106 bits of mantissa. There seem to be various problems in this long double implementation. If Configure detects this brokenness, it will disable the long double support. This can be overridden with explicit C<-Duselongdouble> (or C<-Dusemorebits>, which enables both long doubles and 64 bit integers). If you decide to enable long doubles, for most of the broken things Perl has implemented workarounds, but the handling of the special values infinity and NaN remains badly broken: for example infinity plus zero results in NaN. =head2 Recommended Options AIX 5.1/5.2/5.3/6.1 and 7.1 (threaded/32-bit) With the following options you get a threaded Perl version which passes all make tests in threaded 32-bit mode, which is the default configuration for the Perl builds that AIX ships with. rm config.sh ./Configure \ -d \ -Dcc=cc_r \ -Duseshrplib \ -Dusethreads \ -Dprefix=/usr/opt/perl5_32 The -Dprefix option will install Perl in a directory parallel to the IBM AIX system Perl installation. =head2 Recommended Options AIX 5.1/5.2/5.3/6.1 and 7.1 (32-bit) With the following options you get a Perl version which passes all make tests in 32-bit mode. rm config.sh ./Configure \ -d \ -Dcc=cc_r \ -Duseshrplib \ -Dprefix=/usr/opt/perl5_32 The -Dprefix option will install Perl in a directory parallel to the IBM AIX system Perl installation. =head2 Recommended Options AIX 5.1/5.2/5.3/6.1 and 7.1 (threaded/64-bit) With the following options you get a threaded Perl version which passes all make tests in 64-bit mode. export OBJECT_MODE=64 / setenv OBJECT_MODE 64 (depending on your shell) rm config.sh ./Configure \ -d \ -Dcc=cc_r \ -Duseshrplib \ -Dusethreads \ -Duse64bitall \ -Dprefix=/usr/opt/perl5_64 =head2 Recommended Options AIX 5.1/5.2/5.3/6.1 and 7.1 (64-bit) With the following options you get a Perl version which passes all make tests in 64-bit mode. export OBJECT_MODE=64 / setenv OBJECT_MODE 64 (depending on your shell) rm config.sh ./Configure \ -d \ -Dcc=cc_r \ -Duseshrplib \ -Duse64bitall \ -Dprefix=/usr/opt/perl5_64 The -Dprefix option will install Perl in a directory parallel to the IBM AIX system Perl installation. If you choose gcc to compile 64-bit Perl then you need to add the following option: -Dcc='gcc -maix64' =head2 Compiling Perl 5 on AIX 7.1.0 A regression in AIX 7 causes a failure in make test in Time::Piece during daylight savings time. APAR IV16514 provides the fix for this. A quick test to see if it's required, assuming it is currently daylight savings in Eastern Time, would be to run C< TZ=EST5 date +%Z >. This will come back with C<EST> normally, but nothing if you have the problem. =head2 Compiling Perl 5 on older AIX versions up to 4.3.3 Due to the fact that AIX 4.3.3 reached end-of-service in December 31, 2003 this information is provided as is. The Perl versions prior to Perl 5.8.9 could be compiled on AIX up to 4.3.3 with the following settings (your mileage may vary): When compiling Perl, you must use an ANSI C compiler. AIX does not ship an ANSI compliant C-compiler with AIX by default, but binary builds of gcc for AIX are widely available. At the moment of writing, AIX supports two different native C compilers, for which you have to pay: B<xlC> and B<vac>. If you decide to use either of these two (which is quite a lot easier than using gcc), be sure to upgrade to the latest available patch level. Currently: xlC.C 3.1.4.10 or 3.6.6.0 or 4.0.2.2 or 5.0.2.9 or 6.0.0.3 vac.C 4.4.0.3 or 5.0.2.6 or 6.0.0.1 note that xlC has the OS version in the name as of version 4.0.2.0, so you will find xlC.C for AIX-5.0 as package xlC.aix50.rte 5.0.2.0 or 6.0.0.3 subversions are not the same "latest" on all OS versions. For example, the latest xlC-5 on aix41 is 5.0.2.9, while on aix43, it is 5.0.2.7. Perl can be compiled with either IBM's ANSI C compiler or with gcc. The former is recommended, as not only can it compile Perl with no difficulty, but also can take advantage of features listed later that require the use of IBM compiler-specific command-line flags. The IBM's compiler patch levels 5.0.0.0 and 5.0.1.0 have compiler optimization bugs that affect compiling perl.c and regcomp.c, respectively. If Perl's configuration detects those compiler patch levels, optimization is turned off for the said source code files. Upgrading to at least 5.0.2.0 is recommended. If you decide to use gcc, make sure your installation is recent and complete, and be sure to read the Perl INSTALL file for more gcc-specific details. Please report any hoops you had to jump through to the development team. =head2 OS level Before installing the patches to the IBM C-compiler you need to know the level of patching for the Operating System. IBM's command 'oslevel' will show the base, but is not always complete (in this example oslevel shows 4.3.NULL, whereas the system might run most of 4.3.THREE): # oslevel 4.3.0.0 # lslpp -l | grep 'bos.rte ' bos.rte 4.3.3.75 COMMITTED Base Operating System Runtime bos.rte 4.3.2.0 COMMITTED Base Operating System Runtime # The same might happen to AIX 5.1 or other OS levels. As a side note, Perl cannot be built without bos.adt.syscalls and bos.adt.libm installed # lslpp -l | egrep "syscalls|libm" bos.adt.libm 5.1.0.25 COMMITTED Base Application Development bos.adt.syscalls 5.1.0.36 COMMITTED System Calls Application # =head2 Building Dynamic Extensions on AIX E<lt> 5L AIX supports dynamically loadable objects as well as shared libraries. Shared libraries by convention end with the suffix .a, which is a bit misleading, as an archive can contain static as well as dynamic members. For Perl dynamically loaded objects we use the .so suffix also used on many other platforms. Note that starting from Perl 5.7.2 (and consequently 5.8.0) and AIX 4.3 or newer Perl uses the AIX native dynamic loading interface in the so called runtime linking mode instead of the emulated interface that was used in Perl releases 5.6.1 and earlier or, for AIX releases 4.2 and earlier. This change does break backward compatibility with compiled modules from earlier Perl releases. The change was made to make Perl more compliant with other applications like Apache/mod_perl which are using the AIX native interface. This change also enables the use of C++ code with static constructors and destructors in Perl extensions, which was not possible using the emulated interface. =head2 The IBM ANSI C Compiler All defaults for Configure can be used. If you've chosen to use vac 4, be sure to run 4.4.0.3. Older versions will turn up nasty later on. For vac 5 be sure to run at least 5.0.1.0, but vac 5.0.2.6 or up is highly recommended. Note that since IBM has removed vac 5.0.2.1 through 5.0.2.5 from the software depot, these versions should be considered obsolete. Here's a brief lead of how to upgrade the compiler to the latest level. Of course this is subject to changes. You can only upgrade versions from ftp-available updates if the first three digit groups are the same (in where you can skip intermediate unlike the patches in the developer snapshots of Perl), or to one version up where the "base" is available. In other words, the AIX compiler patches are cumulative. vac.C.4.4.0.1 => vac.C.4.4.0.3 is OK (vac.C.4.4.0.2 not needed) xlC.C.3.1.3.3 => xlC.C.3.1.4.10 is NOT OK (xlC.C.3.1.4.0 is not available) # ftp ftp.software.ibm.com Connected to service.boulder.ibm.com. : welcome message ... Name (ftp.software.ibm.com:merijn): anonymous 331 Guest login ok, send your complete e-mail address as password. Password: ... accepted login stuff ftp> cd /aix/fixes/v4/ ftp> dir other other.ll output to local-file: other.ll? y 200 PORT command successful. 150 Opening ASCII mode data connection for /bin/ls. 226 Transfer complete. ftp> dir xlc xlc.ll output to local-file: xlc.ll? y 200 PORT command successful. 150 Opening ASCII mode data connection for /bin/ls. 226 Transfer complete. ftp> bye ... goodbye messages # ls -l *.ll -rw-rw-rw- 1 merijn system 1169432 Nov 2 17:29 other.ll -rw-rw-rw- 1 merijn system 29170 Nov 2 17:29 xlc.ll On AIX 4.2 using xlC, we continue: # lslpp -l | fgrep 'xlC.C ' xlC.C 3.1.4.9 COMMITTED C for AIX Compiler xlC.C 3.1.4.0 COMMITTED C for AIX Compiler # grep 'xlC.C.3.1.4.*.bff' xlc.ll -rw-r--r-- 1 45776101 1 6286336 Jul 22 1996 xlC.C.3.1.4.1.bff -rw-rw-r-- 1 45776101 1 6173696 Aug 24 1998 xlC.C.3.1.4.10.bff -rw-r--r-- 1 45776101 1 6319104 Aug 14 1996 xlC.C.3.1.4.2.bff -rw-r--r-- 1 45776101 1 6316032 Oct 21 1996 xlC.C.3.1.4.3.bff -rw-r--r-- 1 45776101 1 6315008 Dec 20 1996 xlC.C.3.1.4.4.bff -rw-rw-r-- 1 45776101 1 6178816 Mar 28 1997 xlC.C.3.1.4.5.bff -rw-rw-r-- 1 45776101 1 6188032 May 22 1997 xlC.C.3.1.4.6.bff -rw-rw-r-- 1 45776101 1 6191104 Sep 5 1997 xlC.C.3.1.4.7.bff -rw-rw-r-- 1 45776101 1 6185984 Jan 13 1998 xlC.C.3.1.4.8.bff -rw-rw-r-- 1 45776101 1 6169600 May 27 1998 xlC.C.3.1.4.9.bff # wget ftp://ftp.software.ibm.com/aix/fixes/v4/xlc/xlC.C.3.1.4.10.bff # On AIX 4.3 using vac, we continue: # lslpp -l | grep 'vac.C ' vac.C 5.0.2.2 COMMITTED C for AIX Compiler vac.C 5.0.2.0 COMMITTED C for AIX Compiler # grep 'vac.C.5.0.2.*.bff' other.ll -rw-rw-r-- 1 45776101 1 13592576 Apr 16 2001 vac.C.5.0.2.0.bff -rw-rw-r-- 1 45776101 1 14133248 Apr 9 2002 vac.C.5.0.2.3.bff -rw-rw-r-- 1 45776101 1 14173184 May 20 2002 vac.C.5.0.2.4.bff -rw-rw-r-- 1 45776101 1 14192640 Nov 22 2002 vac.C.5.0.2.6.bff # wget ftp://ftp.software.ibm.com/aix/fixes/v4/other/vac.C.5.0.2.6.bff # Likewise on all other OS levels. Then execute the following command, and fill in its choices # smit install_update -> Install and Update from LATEST Available Software * INPUT device / directory for software [ vac.C.5.0.2.6.bff ] [ OK ] [ OK ] Follow the messages ... and you're done. If you like a more web-like approach, a good start point can be L<http://www14.software.ibm.com/webapp/download/downloadaz.jsp> and click "C for AIX", and follow the instructions. =head2 The usenm option If linking miniperl cc -o miniperl ... miniperlmain.o opmini.o perl.o ... -lm -lc ... causes error like this ld: 0711-317 ERROR: Undefined symbol: .aintl ld: 0711-317 ERROR: Undefined symbol: .copysignl ld: 0711-317 ERROR: Undefined symbol: .syscall ld: 0711-317 ERROR: Undefined symbol: .eaccess ld: 0711-317 ERROR: Undefined symbol: .setresuid ld: 0711-317 ERROR: Undefined symbol: .setresgid ld: 0711-317 ERROR: Undefined symbol: .setproctitle ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information. you could retry with make realclean rm config.sh ./Configure -Dusenm ... which makes Configure to use the C<nm> tool when scanning for library symbols, which usually is not done in AIX. Related to this, you probably should not use the C<-r> option of Configure in AIX, because that affects of how the C<nm> tool is used. =head2 Using GNU's gcc for building Perl Using gcc-3.x (tested with 3.0.4, 3.1, and 3.2) now works out of the box, as do recent gcc-2.9 builds available directly from IBM as part of their Linux compatibility packages, available here: http://www.ibm.com/servers/aix/products/aixos/linux/ =head2 Using Large Files with Perl E<lt> 5L Should yield no problems. =head2 Threaded Perl E<lt> 5L Threads seem to work OK, though at the moment not all tests pass when threads are used in combination with 64-bit configurations. You may get a warning when doing a threaded build: "pp_sys.c", line 4640.39: 1506-280 (W) Function argument assignment between types "unsigned char*" and "const void*" is not allowed. The exact line number may vary, but if the warning (W) comes from a line line this hent = PerlSock_gethostbyaddr(addr, (Netdb_hlen_t) addrlen, addrtype); in the "pp_ghostent" function, you may ignore it safely. The warning is caused by the reentrant variant of gethostbyaddr() having a slightly different prototype than its non-reentrant variant, but the difference is not really significant here. =head2 64-bit Perl E<lt> 5L If your AIX is installed with 64-bit support, you can expect 64-bit configurations to work. In combination with threads some tests might still fail. =head2 AIX 4.2 and extensions using C++ with statics In AIX 4.2 Perl extensions that use C++ functions that use statics may have problems in that the statics are not getting initialized. In newer AIX releases this has been solved by linking Perl with the libC_r library, but unfortunately in AIX 4.2 the said library has an obscure bug where the various functions related to time (such as time() and gettimeofday()) return broken values, and therefore in AIX 4.2 Perl is not linked against the libC_r. =head1 AUTHORS Rainer Tammer <tammer@tammer.net> =cut perluniintro.pod 0000644 00000113367 15125556335 0010027 0 ustar 00 =head1 NAME perluniintro - Perl Unicode introduction =head1 DESCRIPTION This document gives a general idea of Unicode and how to use Unicode in Perl. See L</Further Resources> for references to more in-depth treatments of Unicode. =head2 Unicode Unicode is a character set standard which plans to codify all of the writing systems of the world, plus many other symbols. Unicode and ISO/IEC 10646 are coordinated standards that unify almost all other modern character set standards, covering more than 80 writing systems and hundreds of languages, including all commercially-important modern languages. All characters in the largest Chinese, Japanese, and Korean dictionaries are also encoded. The standards will eventually cover almost all characters in more than 250 writing systems and thousands of languages. Unicode 1.0 was released in October 1991, and 6.0 in October 2010. A Unicode I<character> is an abstract entity. It is not bound to any particular integer width, especially not to the C language C<char>. Unicode is language-neutral and display-neutral: it does not encode the language of the text, and it does not generally define fonts or other graphical layout details. Unicode operates on characters and on text built from those characters. Unicode defines characters like C<LATIN CAPITAL LETTER A> or C<GREEK SMALL LETTER ALPHA> and unique numbers for the characters, in this case 0x0041 and 0x03B1, respectively. These unique numbers are called I<code points>. A code point is essentially the position of the character within the set of all possible Unicode characters, and thus in Perl, the term I<ordinal> is often used interchangeably with it. The Unicode standard prefers using hexadecimal notation for the code points. If numbers like C<0x0041> are unfamiliar to you, take a peek at a later section, L</"Hexadecimal Notation">. The Unicode standard uses the notation C<U+0041 LATIN CAPITAL LETTER A>, to give the hexadecimal code point and the normative name of the character. Unicode also defines various I<properties> for the characters, like "uppercase" or "lowercase", "decimal digit", or "punctuation"; these properties are independent of the names of the characters. Furthermore, various operations on the characters like uppercasing, lowercasing, and collating (sorting) are defined. A Unicode I<logical> "character" can actually consist of more than one internal I<actual> "character" or code point. For Western languages, this is adequately modelled by a I<base character> (like C<LATIN CAPITAL LETTER A>) followed by one or more I<modifiers> (like C<COMBINING ACUTE ACCENT>). This sequence of base character and modifiers is called a I<combining character sequence>. Some non-western languages require more complicated models, so Unicode created the I<grapheme cluster> concept, which was later further refined into the I<extended grapheme cluster>. For example, a Korean Hangul syllable is considered a single logical character, but most often consists of three actual Unicode characters: a leading consonant followed by an interior vowel followed by a trailing consonant. Whether to call these extended grapheme clusters "characters" depends on your point of view. If you are a programmer, you probably would tend towards seeing each element in the sequences as one unit, or "character". However from the user's point of view, the whole sequence could be seen as one "character" since that's probably what it looks like in the context of the user's language. In this document, we take the programmer's point of view: one "character" is one Unicode code point. For some combinations of base character and modifiers, there are I<precomposed> characters. There is a single character equivalent, for example, for the sequence C<LATIN CAPITAL LETTER A> followed by C<COMBINING ACUTE ACCENT>. It is called C<LATIN CAPITAL LETTER A WITH ACUTE>. These precomposed characters are, however, only available for some combinations, and are mainly meant to support round-trip conversions between Unicode and legacy standards (like ISO 8859). Using sequences, as Unicode does, allows for needing fewer basic building blocks (code points) to express many more potential grapheme clusters. To support conversion between equivalent forms, various I<normalization forms> are also defined. Thus, C<LATIN CAPITAL LETTER A WITH ACUTE> is in I<Normalization Form Composed>, (abbreviated NFC), and the sequence C<LATIN CAPITAL LETTER A> followed by C<COMBINING ACUTE ACCENT> represents the same character in I<Normalization Form Decomposed> (NFD). Because of backward compatibility with legacy encodings, the "a unique number for every character" idea breaks down a bit: instead, there is "at least one number for every character". The same character could be represented differently in several legacy encodings. The converse is not true: some code points do not have an assigned character. Firstly, there are unallocated code points within otherwise used blocks. Secondly, there are special Unicode control characters that do not represent true characters. When Unicode was first conceived, it was thought that all the world's characters could be represented using a 16-bit word; that is a maximum of C<0x10000> (or 65,536) characters would be needed, from C<0x0000> to C<0xFFFF>. This soon proved to be wrong, and since Unicode 2.0 (July 1996), Unicode has been defined all the way up to 21 bits (C<0x10FFFF>), and Unicode 3.1 (March 2001) defined the first characters above C<0xFFFF>. The first C<0x10000> characters are called the I<Plane 0>, or the I<Basic Multilingual Plane> (BMP). With Unicode 3.1, 17 (yes, seventeen) planes in all were defined--but they are nowhere near full of defined characters, yet. When a new language is being encoded, Unicode generally will choose a C<block> of consecutive unallocated code points for its characters. So far, the number of code points in these blocks has always been evenly divisible by 16. Extras in a block, not currently needed, are left unallocated, for future growth. But there have been occasions when a later release needed more code points than the available extras, and a new block had to allocated somewhere else, not contiguous to the initial one, to handle the overflow. Thus, it became apparent early on that "block" wasn't an adequate organizing principle, and so the C<Script> property was created. (Later an improved script property was added as well, the C<Script_Extensions> property.) Those code points that are in overflow blocks can still have the same script as the original ones. The script concept fits more closely with natural language: there is C<Latin> script, C<Greek> script, and so on; and there are several artificial scripts, like C<Common> for characters that are used in multiple scripts, such as mathematical symbols. Scripts usually span varied parts of several blocks. For more information about scripts, see L<perlunicode/Scripts>. The division into blocks exists, but it is almost completely accidental--an artifact of how the characters have been and still are allocated. (Note that this paragraph has oversimplified things for the sake of this being an introduction. Unicode doesn't really encode languages, but the writing systems for them--their scripts; and one script can be used by many languages. Unicode also encodes things that aren't really about languages, such as symbols like C<BAGGAGE CLAIM>.) The Unicode code points are just abstract numbers. To input and output these abstract numbers, the numbers must be I<encoded> or I<serialised> somehow. Unicode defines several I<character encoding forms>, of which I<UTF-8> is the most popular. UTF-8 is a variable length encoding that encodes Unicode characters as 1 to 4 bytes. Other encodings include UTF-16 and UTF-32 and their big- and little-endian variants (UTF-8 is byte-order independent). The ISO/IEC 10646 defines the UCS-2 and UCS-4 encoding forms. For more information about encodings--for instance, to learn what I<surrogates> and I<byte order marks> (BOMs) are--see L<perlunicode>. =head2 Perl's Unicode Support Starting from Perl v5.6.0, Perl has had the capacity to handle Unicode natively. Perl v5.8.0, however, is the first recommended release for serious Unicode work. The maintenance release 5.6.1 fixed many of the problems of the initial Unicode implementation, but for example regular expressions still do not work with Unicode in 5.6.1. Perl v5.14.0 is the first release where Unicode support is (almost) seamlessly integrable without some gotchas. (There are a few exceptions. Firstly, some differences in L<quotemeta|perlfunc/quotemeta> were fixed starting in Perl 5.16.0. Secondly, some differences in L<the range operator|perlop/Range Operators> were fixed starting in Perl 5.26.0. Thirdly, some differences in L<split|perlfunc/split> were fixed started in Perl 5.28.0.) To enable this seamless support, you should C<use feature 'unicode_strings'> (which is automatically selected if you C<use 5.012> or higher). See L<feature>. (5.14 also fixes a number of bugs and departures from the Unicode standard.) Before Perl v5.8.0, the use of C<use utf8> was used to declare that operations in the current block or file would be Unicode-aware. This model was found to be wrong, or at least clumsy: the "Unicodeness" is now carried with the data, instead of being attached to the operations. Starting with Perl v5.8.0, only one case remains where an explicit C<use utf8> is needed: if your Perl script itself is encoded in UTF-8, you can use UTF-8 in your identifier names, and in string and regular expression literals, by saying C<use utf8>. This is not the default because scripts with legacy 8-bit data in them would break. See L<utf8>. =head2 Perl's Unicode Model Perl supports both pre-5.6 strings of eight-bit native bytes, and strings of Unicode characters. The general principle is that Perl tries to keep its data as eight-bit bytes for as long as possible, but as soon as Unicodeness cannot be avoided, the data is transparently upgraded to Unicode. Prior to Perl v5.14.0, the upgrade was not completely transparent (see L<perlunicode/The "Unicode Bug">), and for backwards compatibility, full transparency is not gained unless C<use feature 'unicode_strings'> (see L<feature>) or C<use 5.012> (or higher) is selected. Internally, Perl currently uses either whatever the native eight-bit character set of the platform (for example Latin-1) is, defaulting to UTF-8, to encode Unicode strings. Specifically, if all code points in the string are C<0xFF> or less, Perl uses the native eight-bit character set. Otherwise, it uses UTF-8. A user of Perl does not normally need to know nor care how Perl happens to encode its internal strings, but it becomes relevant when outputting Unicode strings to a stream without a PerlIO layer (one with the "default" encoding). In such a case, the raw bytes used internally (the native character set or UTF-8, as appropriate for each string) will be used, and a "Wide character" warning will be issued if those strings contain a character beyond 0x00FF. For example, perl -e 'print "\x{DF}\n", "\x{0100}\x{DF}\n"' produces a fairly useless mixture of native bytes and UTF-8, as well as a warning: Wide character in print at ... To output UTF-8, use the C<:encoding> or C<:utf8> output layer. Prepending binmode(STDOUT, ":utf8"); to this sample program ensures that the output is completely UTF-8, and removes the program's warning. You can enable automatic UTF-8-ification of your standard file handles, default C<open()> layer, and C<@ARGV> by using either the C<-C> command line switch or the C<PERL_UNICODE> environment variable, see L<perlrun|perlrun/-C [numberE<sol>list]> for the documentation of the C<-C> switch. Note that this means that Perl expects other software to work the same way: if Perl has been led to believe that STDIN should be UTF-8, but then STDIN coming in from another command is not UTF-8, Perl will likely complain about the malformed UTF-8. All features that combine Unicode and I/O also require using the new PerlIO feature. Almost all Perl 5.8 platforms do use PerlIO, though: you can see whether yours is by running "perl -V" and looking for C<useperlio=define>. =head2 Unicode and EBCDIC Perl 5.8.0 added support for Unicode on EBCDIC platforms. This support was allowed to lapse in later releases, but was revived in 5.22. Unicode support is somewhat more complex to implement since additional conversions are needed. See L<perlebcdic> for more information. On EBCDIC platforms, the internal Unicode encoding form is UTF-EBCDIC instead of UTF-8. The difference is that as UTF-8 is "ASCII-safe" in that ASCII characters encode to UTF-8 as-is, while UTF-EBCDIC is "EBCDIC-safe", in that all the basic characters (which includes all those that have ASCII equivalents (like C<"A">, C<"0">, C<"%">, I<etc.>) are the same in both EBCDIC and UTF-EBCDIC. Often, documentation will use the term "UTF-8" to mean UTF-EBCDIC as well. This is the case in this document. =head2 Creating Unicode This section applies fully to Perls starting with v5.22. Various caveats for earlier releases are in the L</Earlier releases caveats> subsection below. To create Unicode characters in literals, use the C<\N{...}> notation in double-quoted strings: my $smiley_from_name = "\N{WHITE SMILING FACE}"; my $smiley_from_code_point = "\N{U+263a}"; Similarly, they can be used in regular expression literals $smiley =~ /\N{WHITE SMILING FACE}/; $smiley =~ /\N{U+263a}/; or, starting in v5.32: $smiley =~ /\p{Name=WHITE SMILING FACE}/; $smiley =~ /\p{Name=whitesmilingface}/; At run-time you can use: use charnames (); my $hebrew_alef_from_name = charnames::string_vianame("HEBREW LETTER ALEF"); my $hebrew_alef_from_code_point = charnames::string_vianame("U+05D0"); Naturally, C<ord()> will do the reverse: it turns a character into a code point. There are other runtime options as well. You can use C<pack()>: my $hebrew_alef_from_code_point = pack("U", 0x05d0); Or you can use C<chr()>, though it is less convenient in the general case: $hebrew_alef_from_code_point = chr(utf8::unicode_to_native(0x05d0)); utf8::upgrade($hebrew_alef_from_code_point); The C<utf8::unicode_to_native()> and C<utf8::upgrade()> aren't needed if the argument is above 0xFF, so the above could have been written as $hebrew_alef_from_code_point = chr(0x05d0); since 0x5d0 is above 255. C<\x{}> and C<\o{}> can also be used to specify code points at compile time in double-quotish strings, but, for backward compatibility with older Perls, the same rules apply as with C<chr()> for code points less than 256. C<utf8::unicode_to_native()> is used so that the Perl code is portable to EBCDIC platforms. You can omit it if you're I<really> sure no one will ever want to use your code on a non-ASCII platform. Starting in Perl v5.22, calls to it on ASCII platforms are optimized out, so there's no performance penalty at all in adding it. Or you can simply use the other constructs that don't require it. See L</"Further Resources"> for how to find all these names and numeric codes. =head3 Earlier releases caveats On EBCDIC platforms, prior to v5.22, using C<\N{U+...}> doesn't work properly. Prior to v5.16, using C<\N{...}> with a character name (as opposed to a C<U+...> code point) required a S<C<use charnames :full>>. Prior to v5.14, there were some bugs in C<\N{...}> with a character name (as opposed to a C<U+...> code point). C<charnames::string_vianame()> was introduced in v5.14. Prior to that, C<charnames::vianame()> should work, but only if the argument is of the form C<"U+...">. Your best bet there for runtime Unicode by character name is probably: use charnames (); my $hebrew_alef_from_name = pack("U", charnames::vianame("HEBREW LETTER ALEF")); =head2 Handling Unicode Handling Unicode is for the most part transparent: just use the strings as usual. Functions like C<index()>, C<length()>, and C<substr()> will work on the Unicode characters; regular expressions will work on the Unicode characters (see L<perlunicode> and L<perlretut>). Note that Perl considers grapheme clusters to be separate characters, so for example print length("\N{LATIN CAPITAL LETTER A}\N{COMBINING ACUTE ACCENT}"), "\n"; will print 2, not 1. The only exception is that regular expressions have C<\X> for matching an extended grapheme cluster. (Thus C<\X> in a regular expression would match the entire sequence of both the example characters.) Life is not quite so transparent, however, when working with legacy encodings, I/O, and certain special cases: =head2 Legacy Encodings When you combine legacy data and Unicode, the legacy data needs to be upgraded to Unicode. Normally the legacy data is assumed to be ISO 8859-1 (or EBCDIC, if applicable). The C<Encode> module knows about many encodings and has interfaces for doing conversions between those encodings: use Encode 'decode'; $data = decode("iso-8859-3", $data); # convert from legacy =head2 Unicode I/O Normally, writing out Unicode data print FH $some_string_with_unicode, "\n"; produces raw bytes that Perl happens to use to internally encode the Unicode string. Perl's internal encoding depends on the system as well as what characters happen to be in the string at the time. If any of the characters are at code points C<0x100> or above, you will get a warning. To ensure that the output is explicitly rendered in the encoding you desire--and to avoid the warning--open the stream with the desired encoding. Some examples: open FH, ">:utf8", "file"; open FH, ">:encoding(ucs2)", "file"; open FH, ">:encoding(UTF-8)", "file"; open FH, ">:encoding(shift_jis)", "file"; and on already open streams, use C<binmode()>: binmode(STDOUT, ":utf8"); binmode(STDOUT, ":encoding(ucs2)"); binmode(STDOUT, ":encoding(UTF-8)"); binmode(STDOUT, ":encoding(shift_jis)"); The matching of encoding names is loose: case does not matter, and many encodings have several aliases. Note that the C<:utf8> layer must always be specified exactly like that; it is I<not> subject to the loose matching of encoding names. Also note that currently C<:utf8> is unsafe for input, because it accepts the data without validating that it is indeed valid UTF-8; you should instead use C<:encoding(UTF-8)> (with or without a hyphen). See L<PerlIO> for the C<:utf8> layer, L<PerlIO::encoding> and L<Encode::PerlIO> for the C<:encoding()> layer, and L<Encode::Supported> for many encodings supported by the C<Encode> module. Reading in a file that you know happens to be encoded in one of the Unicode or legacy encodings does not magically turn the data into Unicode in Perl's eyes. To do that, specify the appropriate layer when opening files open(my $fh,'<:encoding(UTF-8)', 'anything'); my $line_of_unicode = <$fh>; open(my $fh,'<:encoding(Big5)', 'anything'); my $line_of_unicode = <$fh>; The I/O layers can also be specified more flexibly with the C<open> pragma. See L<open>, or look at the following example. use open ':encoding(UTF-8)'; # input/output default encoding will be # UTF-8 open X, ">file"; print X chr(0x100), "\n"; close X; open Y, "<file"; printf "%#x\n", ord(<Y>); # this should print 0x100 close Y; With the C<open> pragma you can use the C<:locale> layer BEGIN { $ENV{LC_ALL} = $ENV{LANG} = 'ru_RU.KOI8-R' } # the :locale will probe the locale environment variables like # LC_ALL use open OUT => ':locale'; # russki parusski open(O, ">koi8"); print O chr(0x430); # Unicode CYRILLIC SMALL LETTER A = KOI8-R 0xc1 close O; open(I, "<koi8"); printf "%#x\n", ord(<I>), "\n"; # this should print 0xc1 close I; These methods install a transparent filter on the I/O stream that converts data from the specified encoding when it is read in from the stream. The result is always Unicode. The L<open> pragma affects all the C<open()> calls after the pragma by setting default layers. If you want to affect only certain streams, use explicit layers directly in the C<open()> call. You can switch encodings on an already opened stream by using C<binmode()>; see L<perlfunc/binmode>. The C<:locale> does not currently work with C<open()> and C<binmode()>, only with the C<open> pragma. The C<:utf8> and C<:encoding(...)> methods do work with all of C<open()>, C<binmode()>, and the C<open> pragma. Similarly, you may use these I/O layers on output streams to automatically convert Unicode to the specified encoding when it is written to the stream. For example, the following snippet copies the contents of the file "text.jis" (encoded as ISO-2022-JP, aka JIS) to the file "text.utf8", encoded as UTF-8: open(my $nihongo, '<:encoding(iso-2022-jp)', 'text.jis'); open(my $unicode, '>:utf8', 'text.utf8'); while (<$nihongo>) { print $unicode $_ } The naming of encodings, both by the C<open()> and by the C<open> pragma allows for flexible names: C<koi8-r> and C<KOI8R> will both be understood. Common encodings recognized by ISO, MIME, IANA, and various other standardisation organisations are recognised; for a more detailed list see L<Encode::Supported>. C<read()> reads characters and returns the number of characters. C<seek()> and C<tell()> operate on byte counts, as does C<sysseek()>. C<sysread()> and C<syswrite()> should not be used on file handles with character encoding layers, they behave badly, and that behaviour has been deprecated since perl 5.24. Notice that because of the default behaviour of not doing any conversion upon input if there is no default layer, it is easy to mistakenly write code that keeps on expanding a file by repeatedly encoding the data: # BAD CODE WARNING open F, "file"; local $/; ## read in the whole file of 8-bit characters $t = <F>; close F; open F, ">:encoding(UTF-8)", "file"; print F $t; ## convert to UTF-8 on output close F; If you run this code twice, the contents of the F<file> will be twice UTF-8 encoded. A C<use open ':encoding(UTF-8)'> would have avoided the bug, or explicitly opening also the F<file> for input as UTF-8. B<NOTE>: the C<:utf8> and C<:encoding> features work only if your Perl has been built with L<PerlIO>, which is the default on most systems. =head2 Displaying Unicode As Text Sometimes you might want to display Perl scalars containing Unicode as simple ASCII (or EBCDIC) text. The following subroutine converts its argument so that Unicode characters with code points greater than 255 are displayed as C<\x{...}>, control characters (like C<\n>) are displayed as C<\x..>, and the rest of the characters as themselves: sub nice_string { join("", map { $_ > 255 # if wide character... ? sprintf("\\x{%04X}", $_) # \x{...} : chr($_) =~ /[[:cntrl:]]/ # else if control character... ? sprintf("\\x%02X", $_) # \x.. : quotemeta(chr($_)) # else quoted or as themselves } unpack("W*", $_[0])); # unpack Unicode characters } For example, nice_string("foo\x{100}bar\n") returns the string 'foo\x{0100}bar\x0A' which is ready to be printed. (C<\\x{}> is used here instead of C<\\N{}>, since it's most likely that you want to see what the native values are.) =head2 Special Cases =over 4 =item * Starting in Perl 5.28, it is illegal for bit operators, like C<~>, to operate on strings containing code points above 255. =item * The vec() function may produce surprising results if used on strings containing characters with ordinal values above 255. In such a case, the results are consistent with the internal encoding of the characters, but not with much else. So don't do that, and starting in Perl 5.28, a deprecation message is issued if you do so, becoming illegal in Perl 5.32. =item * Peeking At Perl's Internal Encoding Normal users of Perl should never care how Perl encodes any particular Unicode string (because the normal ways to get at the contents of a string with Unicode--via input and output--should always be via explicitly-defined I/O layers). But if you must, there are two ways of looking behind the scenes. One way of peeking inside the internal encoding of Unicode characters is to use C<unpack("C*", ...> to get the bytes of whatever the string encoding happens to be, or C<unpack("U0..", ...)> to get the bytes of the UTF-8 encoding: # this prints c4 80 for the UTF-8 bytes 0xc4 0x80 print join(" ", unpack("U0(H2)*", pack("U", 0x100))), "\n"; Yet another way would be to use the Devel::Peek module: perl -MDevel::Peek -e 'Dump(chr(0x100))' That shows the C<UTF8> flag in FLAGS and both the UTF-8 bytes and Unicode characters in C<PV>. See also later in this document the discussion about the C<utf8::is_utf8()> function. =back =head2 Advanced Topics =over 4 =item * String Equivalence The question of string equivalence turns somewhat complicated in Unicode: what do you mean by "equal"? (Is C<LATIN CAPITAL LETTER A WITH ACUTE> equal to C<LATIN CAPITAL LETTER A>?) The short answer is that by default Perl compares equivalence (C<eq>, C<ne>) based only on code points of the characters. In the above case, the answer is no (because 0x00C1 != 0x0041). But sometimes, any CAPITAL LETTER A's should be considered equal, or even A's of any case. The long answer is that you need to consider character normalization and casing issues: see L<Unicode::Normalize>, Unicode Technical Report #15, L<Unicode Normalization Forms|https://www.unicode.org/unicode/reports/tr15> and sections on case mapping in the L<Unicode Standard|https://www.unicode.org>. As of Perl 5.8.0, the "Full" case-folding of I<Case Mappings/SpecialCasing> is implemented, but bugs remain in C<qr//i> with them, mostly fixed by 5.14, and essentially entirely by 5.18. =item * String Collation People like to see their strings nicely sorted--or as Unicode parlance goes, collated. But again, what do you mean by collate? (Does C<LATIN CAPITAL LETTER A WITH ACUTE> come before or after C<LATIN CAPITAL LETTER A WITH GRAVE>?) The short answer is that by default, Perl compares strings (C<lt>, C<le>, C<cmp>, C<ge>, C<gt>) based only on the code points of the characters. In the above case, the answer is "after", since C<0x00C1> > C<0x00C0>. The long answer is that "it depends", and a good answer cannot be given without knowing (at the very least) the language context. See L<Unicode::Collate>, and I<Unicode Collation Algorithm> L<https://www.unicode.org/unicode/reports/tr10/> =back =head2 Miscellaneous =over 4 =item * Character Ranges and Classes Character ranges in regular expression bracketed character classes ( e.g., C</[a-z]/>) and in the C<tr///> (also known as C<y///>) operator are not magically Unicode-aware. What this means is that C<[A-Za-z]> will not magically start to mean "all alphabetic letters" (not that it does mean that even for 8-bit characters; for those, if you are using locales (L<perllocale>), use C</[[:alpha:]]/>; and if not, use the 8-bit-aware property C<\p{alpha}>). All the properties that begin with C<\p> (and its inverse C<\P>) are actually character classes that are Unicode-aware. There are dozens of them, see L<perluniprops>. Starting in v5.22, you can use Unicode code points as the end points of regular expression pattern character ranges, and the range will include all Unicode code points that lie between those end points, inclusive. qr/ [ \N{U+03} - \N{U+20} ] /xx includes the code points C<\N{U+03}>, C<\N{U+04}>, ..., C<\N{U+20}>. This also works for ranges in C<tr///> starting in Perl v5.24. =item * String-To-Number Conversions Unicode does define several other decimal--and numeric--characters besides the familiar 0 to 9, such as the Arabic and Indic digits. Perl does not support string-to-number conversion for digits other than ASCII C<0> to C<9> (and ASCII C<a> to C<f> for hexadecimal). To get safe conversions from any Unicode string, use L<Unicode::UCD/num()>. =back =head2 Questions With Answers =over 4 =item * Will My Old Scripts Break? Very probably not. Unless you are generating Unicode characters somehow, old behaviour should be preserved. About the only behaviour that has changed and which could start generating Unicode is the old behaviour of C<chr()> where supplying an argument more than 255 produced a character modulo 255. C<chr(300)>, for example, was equal to C<chr(45)> or "-" (in ASCII), now it is LATIN CAPITAL LETTER I WITH BREVE. =item * How Do I Make My Scripts Work With Unicode? Very little work should be needed since nothing changes until you generate Unicode data. The most important thing is getting input as Unicode; for that, see the earlier I/O discussion. To get full seamless Unicode support, add C<use feature 'unicode_strings'> (or C<use 5.012> or higher) to your script. =item * How Do I Know Whether My String Is In Unicode? You shouldn't have to care. But you may if your Perl is before 5.14.0 or you haven't specified C<use feature 'unicode_strings'> or C<use 5.012> (or higher) because otherwise the rules for the code points in the range 128 to 255 are different depending on whether the string they are contained within is in Unicode or not. (See L<perlunicode/When Unicode Does Not Happen>.) To determine if a string is in Unicode, use: print utf8::is_utf8($string) ? 1 : 0, "\n"; But note that this doesn't mean that any of the characters in the string are necessary UTF-8 encoded, or that any of the characters have code points greater than 0xFF (255) or even 0x80 (128), or that the string has any characters at all. All the C<is_utf8()> does is to return the value of the internal "utf8ness" flag attached to the C<$string>. If the flag is off, the bytes in the scalar are interpreted as a single byte encoding. If the flag is on, the bytes in the scalar are interpreted as the (variable-length, potentially multi-byte) UTF-8 encoded code points of the characters. Bytes added to a UTF-8 encoded string are automatically upgraded to UTF-8. If mixed non-UTF-8 and UTF-8 scalars are merged (double-quoted interpolation, explicit concatenation, or printf/sprintf parameter substitution), the result will be UTF-8 encoded as if copies of the byte strings were upgraded to UTF-8: for example, $a = "ab\x80c"; $b = "\x{100}"; print "$a = $b\n"; the output string will be UTF-8-encoded C<ab\x80c = \x{100}\n>, but C<$a> will stay byte-encoded. Sometimes you might really need to know the byte length of a string instead of the character length. For that use the C<bytes> pragma and the C<length()> function: my $unicode = chr(0x100); print length($unicode), "\n"; # will print 1 use bytes; print length($unicode), "\n"; # will print 2 # (the 0xC4 0x80 of the UTF-8) no bytes; =item * How Do I Find Out What Encoding a File Has? You might try L<Encode::Guess>, but it has a number of limitations. =item * How Do I Detect Data That's Not Valid In a Particular Encoding? Use the C<Encode> package to try converting it. For example, use Encode 'decode'; if (eval { decode('UTF-8', $string, Encode::FB_CROAK); 1 }) { # $string is valid UTF-8 } else { # $string is not valid UTF-8 } Or use C<unpack> to try decoding it: use warnings; @chars = unpack("C0U*", $string_of_bytes_that_I_think_is_utf8); If invalid, a C<Malformed UTF-8 character> warning is produced. The "C0" means "process the string character per character". Without that, the C<unpack("U*", ...)> would work in C<U0> mode (the default if the format string starts with C<U>) and it would return the bytes making up the UTF-8 encoding of the target string, something that will always work. =item * How Do I Convert Binary Data Into a Particular Encoding, Or Vice Versa? This probably isn't as useful as you might think. Normally, you shouldn't need to. In one sense, what you are asking doesn't make much sense: encodings are for characters, and binary data are not "characters", so converting "data" into some encoding isn't meaningful unless you know in what character set and encoding the binary data is in, in which case it's not just binary data, now is it? If you have a raw sequence of bytes that you know should be interpreted via a particular encoding, you can use C<Encode>: use Encode 'from_to'; from_to($data, "iso-8859-1", "UTF-8"); # from latin-1 to UTF-8 The call to C<from_to()> changes the bytes in C<$data>, but nothing material about the nature of the string has changed as far as Perl is concerned. Both before and after the call, the string C<$data> contains just a bunch of 8-bit bytes. As far as Perl is concerned, the encoding of the string remains as "system-native 8-bit bytes". You might relate this to a fictional 'Translate' module: use Translate; my $phrase = "Yes"; Translate::from_to($phrase, 'english', 'deutsch'); ## phrase now contains "Ja" The contents of the string changes, but not the nature of the string. Perl doesn't know any more after the call than before that the contents of the string indicates the affirmative. Back to converting data. If you have (or want) data in your system's native 8-bit encoding (e.g. Latin-1, EBCDIC, etc.), you can use pack/unpack to convert to/from Unicode. $native_string = pack("W*", unpack("U*", $Unicode_string)); $Unicode_string = pack("U*", unpack("W*", $native_string)); If you have a sequence of bytes you B<know> is valid UTF-8, but Perl doesn't know it yet, you can make Perl a believer, too: $Unicode = $bytes; utf8::decode($Unicode); or: $Unicode = pack("U0a*", $bytes); You can find the bytes that make up a UTF-8 sequence with @bytes = unpack("C*", $Unicode_string) and you can create well-formed Unicode with $Unicode_string = pack("U*", 0xff, ...) =item * How Do I Display Unicode? How Do I Input Unicode? See L<http://www.alanwood.net/unicode/> and L<http://www.cl.cam.ac.uk/~mgk25/unicode.html> =item * How Does Unicode Work With Traditional Locales? If your locale is a UTF-8 locale, starting in Perl v5.26, Perl works well for all categories; before this, starting with Perl v5.20, it works for all categories but C<LC_COLLATE>, which deals with sorting and the C<cmp> operator. But note that the standard C<L<Unicode::Collate>> and C<L<Unicode::Collate::Locale>> modules offer much more powerful solutions to collation issues, and work on earlier releases. For other locales, starting in Perl 5.16, you can specify use locale ':not_characters'; to get Perl to work well with them. The catch is that you have to translate from the locale character set to/from Unicode yourself. See L</Unicode IE<sol>O> above for how to use open ':locale'; to accomplish this, but full details are in L<perllocale/Unicode and UTF-8>, including gotchas that happen if you don't specify C<:not_characters>. =back =head2 Hexadecimal Notation The Unicode standard prefers using hexadecimal notation because that more clearly shows the division of Unicode into blocks of 256 characters. Hexadecimal is also simply shorter than decimal. You can use decimal notation, too, but learning to use hexadecimal just makes life easier with the Unicode standard. The C<U+HHHH> notation uses hexadecimal, for example. The C<0x> prefix means a hexadecimal number, the digits are 0-9 I<and> a-f (or A-F, case doesn't matter). Each hexadecimal digit represents four bits, or half a byte. C<print 0x..., "\n"> will show a hexadecimal number in decimal, and C<printf "%x\n", $decimal> will show a decimal number in hexadecimal. If you have just the "hex digits" of a hexadecimal number, you can use the C<hex()> function. print 0x0009, "\n"; # 9 print 0x000a, "\n"; # 10 print 0x000f, "\n"; # 15 print 0x0010, "\n"; # 16 print 0x0011, "\n"; # 17 print 0x0100, "\n"; # 256 print 0x0041, "\n"; # 65 printf "%x\n", 65; # 41 printf "%#x\n", 65; # 0x41 print hex("41"), "\n"; # 65 =head2 Further Resources =over 4 =item * Unicode Consortium L<https://www.unicode.org/> =item * Unicode FAQ L<https://www.unicode.org/unicode/faq/> =item * Unicode Glossary L<https://www.unicode.org/glossary/> =item * Unicode Recommended Reading List The Unicode Consortium has a list of articles and books, some of which give a much more in depth treatment of Unicode: L<http://unicode.org/resources/readinglist.html> =item * Unicode Useful Resources L<https://www.unicode.org/unicode/onlinedat/resources.html> =item * Unicode and Multilingual Support in HTML, Fonts, Web Browsers and Other Applications L<http://www.alanwood.net/unicode/> =item * UTF-8 and Unicode FAQ for Unix/Linux L<http://www.cl.cam.ac.uk/~mgk25/unicode.html> =item * Legacy Character Sets L<http://www.czyborra.com/> L<http://www.eki.ee/letter/> =item * You can explore various information from the Unicode data files using the C<Unicode::UCD> module. =back =head1 UNICODE IN OLDER PERLS If you cannot upgrade your Perl to 5.8.0 or later, you can still do some Unicode processing by using the modules C<Unicode::String>, C<Unicode::Map8>, and C<Unicode::Map>, available from CPAN. If you have the GNU recode installed, you can also use the Perl front-end C<Convert::Recode> for character conversions. The following are fast conversions from ISO 8859-1 (Latin-1) bytes to UTF-8 bytes and back, the code works even with older Perl 5 versions. # ISO 8859-1 to UTF-8 s/([\x80-\xFF])/chr(0xC0|ord($1)>>6).chr(0x80|ord($1)&0x3F)/eg; # UTF-8 to ISO 8859-1 s/([\xC2\xC3])([\x80-\xBF])/chr(ord($1)<<6&0xC0|ord($2)&0x3F)/eg; =head1 SEE ALSO L<perlunitut>, L<perlunicode>, L<Encode>, L<open>, L<utf8>, L<bytes>, L<perlretut>, L<perlrun>, L<Unicode::Collate>, L<Unicode::Normalize>, L<Unicode::UCD> =head1 ACKNOWLEDGMENTS Thanks to the kind readers of the perl5-porters@perl.org, perl-unicode@perl.org, linux-utf8@nl.linux.org, and unicore@unicode.org mailing lists for their valuable feedback. =head1 AUTHOR, COPYRIGHT, AND LICENSE Copyright 2001-2011 Jarkko Hietaniemi E<lt>jhi@iki.fiE<gt>. Now maintained by Perl 5 Porters. This document may be distributed under the same terms as Perl itself. perlrun.pod 0000644 00000155254 15125556335 0006765 0 ustar 00 =head1 NAME perlrun - how to execute the Perl interpreter =head1 SYNOPSIS B<perl> S<[ B<-sTtuUWX> ]> S<[ B<-hv> ] [ B<-V>[:I<configvar>] ]> S<[ B<-cw> ] [ B<-d>[B<t>][:I<debugger>] ] [ B<-D>[I<number/list>] ]> S<[ B<-pna> ] [ B<-F>I<pattern> ] [ B<-l>[I<octal>] ] [ B<-0>[I<octal/hexadecimal>] ]> S<[ B<-I>I<dir> ] [ B<-m>[B<->]I<module> ] [ B<-M>[B<->]I<'module...'> ] [ B<-f> ]> S<[ B<-C [I<number/list>] >]> S<[ B<-S> ]> S<[ B<-x>[I<dir>] ]> S<[ B<-i>[I<extension>] ]> S<[ [B<-e>|B<-E>] I<'command'> ] [ B<--> ] [ I<programfile> ] [ I<argument> ]...> =head1 DESCRIPTION The normal way to run a Perl program is by making it directly executable, or else by passing the name of the source file as an argument on the command line. (An interactive Perl environment is also possible--see L<perldebug> for details on how to do that.) Upon startup, Perl looks for your program in one of the following places: =over 4 =item 1. Specified line by line via L<-e|/-e commandline> or L<-E|/-E commandline> switches on the command line. =item 2. Contained in the file specified by the first filename on the command line. (Note that systems supporting the C<#!> notation invoke interpreters this way. See L</Location of Perl>.) =item 3. Passed in implicitly via standard input. This works only if there are no filename arguments--to pass arguments to a STDIN-read program you must explicitly specify a "-" for the program name. =back With methods 2 and 3, Perl starts parsing the input file from the beginning, unless you've specified a L</-x> switch, in which case it scans for the first line starting with C<#!> and containing the word "perl", and starts there instead. This is useful for running a program embedded in a larger message. (In this case you would indicate the end of the program using the C<__END__> token.) The C<#!> line is always examined for switches as the line is being parsed. Thus, if you're on a machine that allows only one argument with the C<#!> line, or worse, doesn't even recognize the C<#!> line, you still can get consistent switch behaviour regardless of how Perl was invoked, even if L</-x> was used to find the beginning of the program. Because historically some operating systems silently chopped off kernel interpretation of the C<#!> line after 32 characters, some switches may be passed in on the command line, and some may not; you could even get a "-" without its letter, if you're not careful. You probably want to make sure that all your switches fall either before or after that 32-character boundary. Most switches don't actually care if they're processed redundantly, but getting a "-" instead of a complete switch could cause Perl to try to execute standard input instead of your program. And a partial L<-I|/-Idirectory> switch could also cause odd results. Some switches do care if they are processed twice, for instance combinations of L<-l|/-l[octnum]> and L<-0|/-0[octalE<sol>hexadecimal]>. Either put all the switches after the 32-character boundary (if applicable), or replace the use of B<-0>I<digits> by C<BEGIN{ $/ = "\0digits"; }>. Parsing of the C<#!> switches starts wherever "perl" is mentioned in the line. The sequences "-*" and "- " are specifically ignored so that you could, if you were so inclined, say #!/bin/sh #! -*- perl -*- -p eval 'exec perl -x -wS $0 ${1+"$@"}' if 0; to let Perl see the L</-p> switch. A similar trick involves the I<env> program, if you have it. #!/usr/bin/env perl The examples above use a relative path to the perl interpreter, getting whatever version is first in the user's path. If you want a specific version of Perl, say, perl5.14.1, you should place that directly in the C<#!> line's path. If the C<#!> line does not contain the word "perl" nor the word "indir", the program named after the C<#!> is executed instead of the Perl interpreter. This is slightly bizarre, but it helps people on machines that don't do C<#!>, because they can tell a program that their SHELL is F</usr/bin/perl>, and Perl will then dispatch the program to the correct interpreter for them. After locating your program, Perl compiles the entire program to an internal form. If there are any compilation errors, execution of the program is not attempted. (This is unlike the typical shell script, which might run part-way through before finding a syntax error.) If the program is syntactically correct, it is executed. If the program runs off the end without hitting an exit() or die() operator, an implicit C<exit(0)> is provided to indicate successful completion. =head2 #! and quoting on non-Unix systems X<hashbang> X<#!> Unix's C<#!> technique can be simulated on other systems: =over 4 =item OS/2 Put extproc perl -S -your_switches as the first line in C<*.cmd> file (L</-S> due to a bug in cmd.exe's `extproc' handling). =item MS-DOS Create a batch file to run your program, and codify it in C<ALTERNATE_SHEBANG> (see the F<dosish.h> file in the source distribution for more information). =item Win95/NT The Win95/NT installation, when using the ActiveState installer for Perl, will modify the Registry to associate the F<.pl> extension with the perl interpreter. If you install Perl by other means (including building from the sources), you may have to modify the Registry yourself. Note that this means you can no longer tell the difference between an executable Perl program and a Perl library file. =item VMS Put $ perl -mysw 'f$env("procedure")' 'p1' 'p2' 'p3' 'p4' 'p5' 'p6' 'p7' 'p8' ! $ exit++ + ++$status != 0 and $exit = $status = undef; at the top of your program, where B<-mysw> are any command line switches you want to pass to Perl. You can now invoke the program directly, by saying C<perl program>, or as a DCL procedure, by saying C<@program> (or implicitly via F<DCL$PATH> by just using the name of the program). This incantation is a bit much to remember, but Perl will display it for you if you say C<perl "-V:startperl">. =back Command-interpreters on non-Unix systems have rather different ideas on quoting than Unix shells. You'll need to learn the special characters in your command-interpreter (C<*>, C<\> and C<"> are common) and how to protect whitespace and these characters to run one-liners (see L<-e|/-e commandline> below). On some systems, you may have to change single-quotes to double ones, which you must I<not> do on Unix or Plan 9 systems. You might also have to change a single % to a %%. For example: # Unix perl -e 'print "Hello world\n"' # MS-DOS, etc. perl -e "print \"Hello world\n\"" # VMS perl -e "print ""Hello world\n""" The problem is that none of this is reliable: it depends on the command and it is entirely possible neither works. If I<4DOS> were the command shell, this would probably work better: perl -e "print <Ctrl-x>"Hello world\n<Ctrl-x>"" B<CMD.EXE> in Windows NT slipped a lot of standard Unix functionality in when nobody was looking, but just try to find documentation for its quoting rules. There is no general solution to all of this. It's just a mess. =head2 Location of Perl X<perl, location of interpreter> It may seem obvious to say, but Perl is useful only when users can easily find it. When possible, it's good for both F</usr/bin/perl> and F</usr/local/bin/perl> to be symlinks to the actual binary. If that can't be done, system administrators are strongly encouraged to put (symlinks to) perl and its accompanying utilities into a directory typically found along a user's PATH, or in some other obvious and convenient place. In this documentation, C<#!/usr/bin/perl> on the first line of the program will stand in for whatever method works on your system. You are advised to use a specific path if you care about a specific version. #!/usr/local/bin/perl5.14 or if you just want to be running at least version, place a statement like this at the top of your program: use 5.014; =head2 Command Switches X<perl, command switches> X<command switches> As with all standard commands, a single-character switch may be clustered with the following switch, if any. #!/usr/bin/perl -spi.orig # same as -s -p -i.orig A C<--> signals the end of options and disables further option processing. Any arguments after the C<--> are treated as filenames and arguments. Switches include: =over 5 =item B<-0>[I<octal/hexadecimal>] X<-0> X<$/> specifies the input record separator (C<$/>) as an octal or hexadecimal number. If there are no digits, the null character is the separator. Other switches may precede or follow the digits. For example, if you have a version of I<find> which can print filenames terminated by the null character, you can say this: find . -name '*.orig' -print0 | perl -n0e unlink The special value 00 will cause Perl to slurp files in paragraph mode. Any value 0400 or above will cause Perl to slurp files whole, but by convention the value 0777 is the one normally used for this purpose. You can also specify the separator character using hexadecimal notation: B<-0xI<HHH...>>, where the C<I<H>> are valid hexadecimal digits. Unlike the octal form, this one may be used to specify any Unicode character, even those beyond 0xFF. So if you I<really> want a record separator of 0777, specify it as B<-0x1FF>. (This means that you cannot use the L</-x> option with a directory name that consists of hexadecimal digits, or else Perl will think you have specified a hex number to B<-0>.) =item B<-a> X<-a> X<autosplit> turns on autosplit mode when used with a L</-n> or L</-p>. An implicit split command to the @F array is done as the first thing inside the implicit while loop produced by the L</-n> or L</-p>. perl -ane 'print pop(@F), "\n";' is equivalent to while (<>) { @F = split(' '); print pop(@F), "\n"; } An alternate delimiter may be specified using L<-F|/-Fpattern>. B<-a> implicitly sets L</-n>. =item B<-C [I<number/list>]> X<-C> The B<-C> flag controls some of the Perl Unicode features. As of 5.8.1, the B<-C> can be followed either by a number or a list of option letters. The letters, their numeric values, and effects are as follows; listing the letters is equal to summing the numbers. I 1 STDIN is assumed to be in UTF-8 O 2 STDOUT will be in UTF-8 E 4 STDERR will be in UTF-8 S 7 I + O + E i 8 UTF-8 is the default PerlIO layer for input streams o 16 UTF-8 is the default PerlIO layer for output streams D 24 i + o A 32 the @ARGV elements are expected to be strings encoded in UTF-8 L 64 normally the "IOEioA" are unconditional, the L makes them conditional on the locale environment variables (the LC_ALL, LC_CTYPE, and LANG, in the order of decreasing precedence) -- if the variables indicate UTF-8, then the selected "IOEioA" are in effect a 256 Set ${^UTF8CACHE} to -1, to run the UTF-8 caching code in debugging mode. =for documenting_the_underdocumented perl.h gives W/128 as PERL_UNICODE_WIDESYSCALLS "/* for Sarathy */" =for todo perltodo mentions Unicode in %ENV and filenames. I guess that these will be options e and f (or F). For example, B<-COE> and B<-C6> will both turn on UTF-8-ness on both STDOUT and STDERR. Repeating letters is just redundant, not cumulative nor toggling. The C<io> options mean that any subsequent open() (or similar I/O operations) in main program scope will have the C<:utf8> PerlIO layer implicitly applied to them, in other words, UTF-8 is expected from any input stream, and UTF-8 is produced to any output stream. This is just the default set via L<C<${^OPEN}>|perlvar/${^OPEN}>, with explicit layers in open() and with binmode() one can manipulate streams as usual. This has no effect on code run in modules. B<-C> on its own (not followed by any number or option list), or the empty string C<""> for the L</PERL_UNICODE> environment variable, has the same effect as B<-CSDL>. In other words, the standard I/O handles and the default C<open()> layer are UTF-8-fied I<but> only if the locale environment variables indicate a UTF-8 locale. This behaviour follows the I<implicit> (and problematic) UTF-8 behaviour of Perl 5.8.0. (See L<perl581delta/UTF-8 no longer default under UTF-8 locales>.) You can use B<-C0> (or C<"0"> for C<PERL_UNICODE>) to explicitly disable all the above Unicode features. The read-only magic variable C<${^UNICODE}> reflects the numeric value of this setting. This variable is set during Perl startup and is thereafter read-only. If you want runtime effects, use the three-arg open() (see L<perlfunc/open>), the two-arg binmode() (see L<perlfunc/binmode>), and the C<open> pragma (see L<open>). (In Perls earlier than 5.8.1 the B<-C> switch was a Win32-only switch that enabled the use of Unicode-aware "wide system call" Win32 APIs. This feature was practically unused, however, and the command line switch was therefore "recycled".) B<Note:> Since perl 5.10.1, if the B<-C> option is used on the C<#!> line, it must be specified on the command line as well, since the standard streams are already set up at this point in the execution of the perl interpreter. You can also use binmode() to set the encoding of an I/O stream. =item B<-c> X<-c> causes Perl to check the syntax of the program and then exit without executing it. Actually, it I<will> execute any C<BEGIN>, C<UNITCHECK>, or C<CHECK> blocks and any C<use> statements: these are considered as occurring outside the execution of your program. C<INIT> and C<END> blocks, however, will be skipped. =item B<-d> X<-d> X<-dt> =item B<-dt> runs the program under the Perl debugger. See L<perldebug>. If B<t> is specified, it indicates to the debugger that threads will be used in the code being debugged. =item B<-d:>I<MOD[=bar,baz]> X<-d> X<-dt> =item B<-dt:>I<MOD[=bar,baz]> runs the program under the control of a debugging, profiling, or tracing module installed as C<Devel::I<MOD>>. E.g., B<-d:DProf> executes the program using the C<Devel::DProf> profiler. As with the L<-M|/-M[-]module> flag, options may be passed to the C<Devel::I<MOD>> package where they will be received and interpreted by the C<Devel::I<MOD>::import> routine. Again, like B<-M>, use -B<-d:-I<MOD>> to call C<Devel::I<MOD>::unimport> instead of import. The comma-separated list of options must follow a C<=> character. If B<t> is specified, it indicates to the debugger that threads will be used in the code being debugged. See L<perldebug>. =item B<-D>I<letters> X<-D> X<DEBUGGING> X<-DDEBUGGING> =item B<-D>I<number> sets debugging flags. This switch is enabled only if your perl binary has been built with debugging enabled: normal production perls won't have been. For example, to watch how perl executes your program, use B<-Dtls>. Another nice value is B<-Dx>, which lists your compiled syntax tree, and B<-Dr> displays compiled regular expressions; the format of the output is explained in L<perldebguts>. As an alternative, specify a number instead of list of letters (e.g., B<-D14> is equivalent to B<-Dtls>): 1 p Tokenizing and parsing (with v, displays parse stack) 2 s Stack snapshots (with v, displays all stacks) 4 l Context (loop) stack processing 8 t Trace execution 16 o Method and overloading resolution 32 c String/numeric conversions 64 P Print profiling info, source file input state 128 m Memory and SV allocation 256 f Format processing 512 r Regular expression parsing and execution 1024 x Syntax tree dump 2048 u Tainting checks 4096 U Unofficial, User hacking (reserved for private, unreleased use) 16384 X Scratchpad allocation 32768 D Cleaning up 65536 S Op slab allocation 131072 T Tokenizing 262144 R Include reference counts of dumped variables (eg when using -Ds) 524288 J show s,t,P-debug (don't Jump over) on opcodes within package DB 1048576 v Verbose: use in conjunction with other flags to increase the verbosity of the output. Is a no-op on many of the other flags 2097152 C Copy On Write 4194304 A Consistency checks on internal structures 8388608 q quiet - currently only suppresses the "EXECUTING" message 16777216 M trace smart match resolution 33554432 B dump suBroutine definitions, including special Blocks like BEGIN 67108864 L trace Locale-related info; what gets output is very subject to change 134217728 i trace PerlIO layer processing. Set PERLIO_DEBUG to the filename to trace to. 268435456 y trace y///, tr/// compilation and execution All these flags require B<-DDEBUGGING> when you compile the Perl executable (but see C<:opd> in L<Devel::Peek> or L<re/'debug' mode> which may change this). See the F<INSTALL> file in the Perl source distribution for how to do this. If you're just trying to get a print out of each line of Perl code as it executes, the way that C<sh -x> provides for shell scripts, you can't use Perl's B<-D> switch. Instead do this # If you have "env" utility env PERLDB_OPTS="NonStop=1 AutoTrace=1 frame=2" perl -dS program # Bourne shell syntax $ PERLDB_OPTS="NonStop=1 AutoTrace=1 frame=2" perl -dS program # csh syntax % (setenv PERLDB_OPTS "NonStop=1 AutoTrace=1 frame=2"; perl -dS program) See L<perldebug> for details and variations. =item B<-e> I<commandline> X<-e> may be used to enter one line of program. If B<-e> is given, Perl will not look for a filename in the argument list. Multiple B<-e> commands may be given to build up a multi-line script. Make sure to use semicolons where you would in a normal program. =item B<-E> I<commandline> X<-E> behaves just like L<-e|/-e commandline>, except that it implicitly enables all optional features (in the main compilation unit). See L<feature>. =item B<-f> X<-f> X<sitecustomize> X<sitecustomize.pl> Disable executing F<$Config{sitelib}/sitecustomize.pl> at startup. Perl can be built so that it by default will try to execute F<$Config{sitelib}/sitecustomize.pl> at startup (in a BEGIN block). This is a hook that allows the sysadmin to customize how Perl behaves. It can for instance be used to add entries to the @INC array to make Perl find modules in non-standard locations. Perl actually inserts the following code: BEGIN { do { local $!; -f "$Config{sitelib}/sitecustomize.pl"; } && do "$Config{sitelib}/sitecustomize.pl"; } Since it is an actual C<do> (not a C<require>), F<sitecustomize.pl> doesn't need to return a true value. The code is run in package C<main>, in its own lexical scope. However, if the script dies, C<$@> will not be set. The value of C<$Config{sitelib}> is also determined in C code and not read from C<Config.pm>, which is not loaded. The code is executed I<very> early. For example, any changes made to C<@INC> will show up in the output of `perl -V`. Of course, C<END> blocks will be likewise executed very late. To determine at runtime if this capability has been compiled in your perl, you can check the value of C<$Config{usesitecustomize}>. =item B<-F>I<pattern> X<-F> specifies the pattern to split on for L</-a>. The pattern may be surrounded by C<//>, C<"">, or C<''>, otherwise it will be put in single quotes. You can't use literal whitespace or NUL characters in the pattern. B<-F> implicitly sets both L</-a> and L</-n>. =item B<-h> X<-h> prints a summary of the options. =item B<-i>[I<extension>] X<-i> X<in-place> specifies that files processed by the C<E<lt>E<gt>> construct are to be edited in-place. It does this by renaming the input file, opening the output file by the original name, and selecting that output file as the default for print() statements. The extension, if supplied, is used to modify the name of the old file to make a backup copy, following these rules: If no extension is supplied, and your system supports it, the original I<file> is kept open without a name while the output is redirected to a new file with the original I<filename>. When perl exits, cleanly or not, the original I<file> is unlinked. If the extension doesn't contain a C<*>, then it is appended to the end of the current filename as a suffix. If the extension does contain one or more C<*> characters, then each C<*> is replaced with the current filename. In Perl terms, you could think of this as: ($backup = $extension) =~ s/\*/$file_name/g; This allows you to add a prefix to the backup file, instead of (or in addition to) a suffix: $ perl -pi'orig_*' -e 's/bar/baz/' fileA # backup to # 'orig_fileA' Or even to place backup copies of the original files into another directory (provided the directory already exists): $ perl -pi'old/*.orig' -e 's/bar/baz/' fileA # backup to # 'old/fileA.orig' These sets of one-liners are equivalent: $ perl -pi -e 's/bar/baz/' fileA # overwrite current file $ perl -pi'*' -e 's/bar/baz/' fileA # overwrite current file $ perl -pi'.orig' -e 's/bar/baz/' fileA # backup to 'fileA.orig' $ perl -pi'*.orig' -e 's/bar/baz/' fileA # backup to 'fileA.orig' From the shell, saying $ perl -p -i.orig -e "s/foo/bar/; ... " is the same as using the program: #!/usr/bin/perl -pi.orig s/foo/bar/; which is equivalent to #!/usr/bin/perl $extension = '.orig'; LINE: while (<>) { if ($ARGV ne $oldargv) { if ($extension !~ /\*/) { $backup = $ARGV . $extension; } else { ($backup = $extension) =~ s/\*/$ARGV/g; } rename($ARGV, $backup); open(ARGVOUT, ">$ARGV"); select(ARGVOUT); $oldargv = $ARGV; } s/foo/bar/; } continue { print; # this prints to original filename } select(STDOUT); except that the B<-i> form doesn't need to compare $ARGV to $oldargv to know when the filename has changed. It does, however, use ARGVOUT for the selected filehandle. Note that STDOUT is restored as the default output filehandle after the loop. As shown above, Perl creates the backup file whether or not any output is actually changed. So this is just a fancy way to copy files: $ perl -p -i'/some/file/path/*' -e 1 file1 file2 file3... or $ perl -p -i'.orig' -e 1 file1 file2 file3... You can use C<eof> without parentheses to locate the end of each input file, in case you want to append to each file, or reset line numbering (see example in L<perlfunc/eof>). If, for a given file, Perl is unable to create the backup file as specified in the extension then it will skip that file and continue on with the next one (if it exists). For a discussion of issues surrounding file permissions and B<-i>, see L<perlfaq5/Why does Perl let me delete read-only files? Why does -i clobber protected files? Isn't this a bug in Perl?>. You cannot use B<-i> to create directories or to strip extensions from files. Perl does not expand C<~> in filenames, which is good, since some folks use it for their backup files: $ perl -pi~ -e 's/foo/bar/' file1 file2 file3... Note that because B<-i> renames or deletes the original file before creating a new file of the same name, Unix-style soft and hard links will not be preserved. Finally, the B<-i> switch does not impede execution when no files are given on the command line. In this case, no backup is made (the original file cannot, of course, be determined) and processing proceeds from STDIN to STDOUT as might be expected. =item B<-I>I<directory> X<-I> X<@INC> Directories specified by B<-I> are prepended to the search path for modules (C<@INC>). =item B<-l>[I<octnum>] X<-l> X<$/> X<$\> enables automatic line-ending processing. It has two separate effects. First, it automatically chomps C<$/> (the input record separator) when used with L</-n> or L</-p>. Second, it assigns C<$\> (the output record separator) to have the value of I<octnum> so that any print statements will have that separator added back on. If I<octnum> is omitted, sets C<$\> to the current value of C<$/>. For instance, to trim lines to 80 columns: perl -lpe 'substr($_, 80) = ""' Note that the assignment C<$\ = $/> is done when the switch is processed, so the input record separator can be different than the output record separator if the B<-l> switch is followed by a L<-0|/-0[octalE<sol>hexadecimal]> switch: gnufind / -print0 | perl -ln0e 'print "found $_" if -p' This sets C<$\> to newline and then sets C<$/> to the null character. =item B<-m>[B<->]I<module> X<-m> X<-M> =item B<-M>[B<->]I<module> =item B<-M>[B<->]I<'module ...'> =item B<-[mM]>[B<->]I<module=arg[,arg]...> B<-m>I<module> executes C<use> I<module> C<();> before executing your program. This loads the module, but does not call its C<import> method, so does not import subroutines and does not give effect to a pragma. B<-M>I<module> executes C<use> I<module> C<;> before executing your program. This loads the module and calls its C<import> method, causing the module to have its default effect, typically importing subroutines or giving effect to a pragma. You can use quotes to add extra code after the module name, e.g., C<'-MI<MODULE> qw(foo bar)'>. If the first character after the B<-M> or B<-m> is a dash (B<->) then the 'use' is replaced with 'no'. This makes no difference for B<-m>. A little builtin syntactic sugar means you can also say B<-mI<MODULE>=foo,bar> or B<-MI<MODULE>=foo,bar> as a shortcut for B<'-MI<MODULE> qw(foo bar)'>. This avoids the need to use quotes when importing symbols. The actual code generated by B<-MI<MODULE>=foo,bar> is C<use module split(/,/,q{foo,bar})>. Note that the C<=> form removes the distinction between B<-m> and B<-M>; that is, B<-mI<MODULE>=foo,bar> is the same as B<-MI<MODULE>=foo,bar>. A consequence of the C<split> formulation is that B<-MI<MODULE>=number> never does a version check, unless C<I<MODULE>::import()> itself is set up to do a version check, which could happen for example if I<MODULE> inherits from L<Exporter>. =item B<-n> X<-n> causes Perl to assume the following loop around your program, which makes it iterate over filename arguments somewhat like I<sed -n> or I<awk>: LINE: while (<>) { ... # your program goes here } Note that the lines are not printed by default. See L</-p> to have lines printed. If a file named by an argument cannot be opened for some reason, Perl warns you about it and moves on to the next file. Also note that C<< <> >> passes command line arguments to L<perlfunc/open>, which doesn't necessarily interpret them as file names. See L<perlop> for possible security implications. Here is an efficient way to delete all files that haven't been modified for at least a week: find . -mtime +7 -print | perl -nle unlink This is faster than using the B<-exec> switch of I<find> because you don't have to start a process on every filename found (but it's not faster than using the B<-delete> switch available in newer versions of I<find>. It does suffer from the bug of mishandling newlines in pathnames, which you can fix if you follow the example under L<-0|/-0[octalE<sol>hexadecimal]>. C<BEGIN> and C<END> blocks may be used to capture control before or after the implicit program loop, just as in I<awk>. =item B<-p> X<-p> causes Perl to assume the following loop around your program, which makes it iterate over filename arguments somewhat like I<sed>: LINE: while (<>) { ... # your program goes here } continue { print or die "-p destination: $!\n"; } If a file named by an argument cannot be opened for some reason, Perl warns you about it, and moves on to the next file. Note that the lines are printed automatically. An error occurring during printing is treated as fatal. To suppress printing use the L</-n> switch. A B<-p> overrides a B<-n> switch. C<BEGIN> and C<END> blocks may be used to capture control before or after the implicit loop, just as in I<awk>. =item B<-s> X<-s> enables rudimentary switch parsing for switches on the command line after the program name but before any filename arguments (or before an argument of B<-->). Any switch found there is removed from @ARGV and sets the corresponding variable in the Perl program. The following program prints "1" if the program is invoked with a B<-xyz> switch, and "abc" if it is invoked with B<-xyz=abc>. #!/usr/bin/perl -s if ($xyz) { print "$xyz\n" } Do note that a switch like B<--help> creates the variable C<${-help}>, which is not compliant with C<use strict "refs">. Also, when using this option on a script with warnings enabled you may get a lot of spurious "used only once" warnings. =item B<-S> X<-S> makes Perl use the L</PATH> environment variable to search for the program unless the name of the program contains path separators. On some platforms, this also makes Perl append suffixes to the filename while searching for it. For example, on Win32 platforms, the ".bat" and ".cmd" suffixes are appended if a lookup for the original name fails, and if the name does not already end in one of those suffixes. If your Perl was compiled with C<DEBUGGING> turned on, using the L<-Dp|/-Dletters> switch to Perl shows how the search progresses. Typically this is used to emulate C<#!> startup on platforms that don't support C<#!>. It's also convenient when debugging a script that uses C<#!>, and is thus normally found by the shell's $PATH search mechanism. This example works on many platforms that have a shell compatible with Bourne shell: #!/usr/bin/perl eval 'exec /usr/bin/perl -wS $0 ${1+"$@"}' if $running_under_some_shell; The system ignores the first line and feeds the program to F</bin/sh>, which proceeds to try to execute the Perl program as a shell script. The shell executes the second line as a normal shell command, and thus starts up the Perl interpreter. On some systems $0 doesn't always contain the full pathname, so the L</-S> tells Perl to search for the program if necessary. After Perl locates the program, it parses the lines and ignores them because the variable $running_under_some_shell is never true. If the program will be interpreted by csh, you will need to replace C<${1+"$@"}> with C<$*>, even though that doesn't understand embedded spaces (and such) in the argument list. To start up I<sh> rather than I<csh>, some systems may have to replace the C<#!> line with a line containing just a colon, which will be politely ignored by Perl. Other systems can't control that, and need a totally devious construct that will work under any of I<csh>, I<sh>, or Perl, such as the following: eval '(exit $?0)' && eval 'exec perl -wS $0 ${1+"$@"}' & eval 'exec /usr/bin/perl -wS $0 $argv:q' if $running_under_some_shell; If the filename supplied contains directory separators (and so is an absolute or relative pathname), and if that file is not found, platforms that append file extensions will do so and try to look for the file with those extensions added, one by one. On DOS-like platforms, if the program does not contain directory separators, it will first be searched for in the current directory before being searched for on the PATH. On Unix platforms, the program will be searched for strictly on the PATH. =item B<-t> X<-t> Like L</-T>, but taint checks will issue warnings rather than fatal errors. These warnings can now be controlled normally with C<no warnings qw(taint)>. B<Note: This is not a substitute for C<-T>!> This is meant to be used I<only> as a temporary development aid while securing legacy code: for real production code and for new secure code written from scratch, always use the real L</-T>. =item B<-T> X<-T> turns on "taint" so you can test them. Ordinarily these checks are done only when running setuid or setgid. It's a good idea to turn them on explicitly for programs that run on behalf of someone else whom you might not necessarily trust, such as CGI programs or any internet servers you might write in Perl. See L<perlsec> for details. For security reasons, this option must be seen by Perl quite early; usually this means it must appear early on the command line or in the C<#!> line for systems which support that construct. =item B<-u> X<-u> This switch causes Perl to dump core after compiling your program. You can then in theory take this core dump and turn it into an executable file by using the I<undump> program (not supplied). This speeds startup at the expense of some disk space (which you can minimize by stripping the executable). (Still, a "hello world" executable comes out to about 200K on my machine.) If you want to execute a portion of your program before dumping, use the C<CORE::dump()> function instead. Note: availability of I<undump> is platform specific and may not be available for a specific port of Perl. =item B<-U> X<-U> allows Perl to do unsafe operations. Currently the only "unsafe" operations are attempting to unlink directories while running as superuser and running setuid programs with fatal taint checks turned into warnings. Note that warnings must be enabled along with this option to actually I<generate> the taint-check warnings. =item B<-v> X<-v> prints the version and patchlevel of your perl executable. =item B<-V> X<-V> prints summary of the major perl configuration values and the current values of @INC. =item B<-V:>I<configvar> Prints to STDOUT the value of the named configuration variable(s), with multiples when your C<I<configvar>> argument looks like a regex (has non-letters). For example: $ perl -V:libc libc='/lib/libc-2.2.4.so'; $ perl -V:lib. libs='-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc'; libc='/lib/libc-2.2.4.so'; $ perl -V:lib.* libpth='/usr/local/lib /lib /usr/lib'; libs='-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc'; lib_ext='.a'; libc='/lib/libc-2.2.4.so'; libperl='libperl.a'; .... Additionally, extra colons can be used to control formatting. A trailing colon suppresses the linefeed and terminator ";", allowing you to embed queries into shell commands. (mnemonic: PATH separator ":".) $ echo "compression-vars: " `perl -V:z.*: ` " are here !" compression-vars: zcat='' zip='zip' are here ! A leading colon removes the "name=" part of the response, this allows you to map to the name you need. (mnemonic: empty label) $ echo "goodvfork="`./perl -Ilib -V::usevfork` goodvfork=false; Leading and trailing colons can be used together if you need positional parameter values without the names. Note that in the case below, the C<PERL_API> params are returned in alphabetical order. $ echo building_on `perl -V::osname: -V::PERL_API_.*:` now building_on 'linux' '5' '1' '9' now =item B<-w> X<-w> prints warnings about dubious constructs, such as variable names mentioned only once and scalar variables used before being set; redefined subroutines; references to undefined filehandles; filehandles opened read-only that you are attempting to write on; values used as a number that don't I<look> like numbers; using an array as though it were a scalar; if your subroutines recurse more than 100 deep; and innumerable other things. This switch really just enables the global C<$^W> variable; normally, the lexically scoped C<use warnings> pragma is preferred. You can disable or promote into fatal errors specific warnings using C<__WARN__> hooks, as described in L<perlvar> and L<perlfunc/warn>. See also L<perldiag> and L<perltrap>. A fine-grained warning facility is also available if you want to manipulate entire classes of warnings; see L<warnings>. =item B<-W> X<-W> Enables all warnings regardless of C<no warnings> or C<$^W>. See L<warnings>. =item B<-X> X<-X> Disables all warnings regardless of C<use warnings> or C<$^W>. See L<warnings>. Forbidden in L</C<PERL5OPT>>. =item B<-x> X<-x> =item B<-x>I<directory> tells Perl that the program is embedded in a larger chunk of unrelated text, such as in a mail message. Leading garbage will be discarded until the first line that starts with C<#!> and contains the string "perl". Any meaningful switches on that line will be applied. All references to line numbers by the program (warnings, errors, ...) will treat the C<#!> line as the first line. Thus a warning on the 2nd line of the program, which is on the 100th line in the file will be reported as line 2, not as line 100. This can be overridden by using the C<#line> directive. (See L<perlsyn/"Plain Old Comments (Not!)">) If a directory name is specified, Perl will switch to that directory before running the program. The B<-x> switch controls only the disposal of leading garbage. The program must be terminated with C<__END__> if there is trailing garbage to be ignored; the program can process any or all of the trailing garbage via the C<DATA> filehandle if desired. The directory, if specified, must appear immediately following the B<-x> with no intervening whitespace. =back =head1 ENVIRONMENT X<perl, environment variables> =over 12 =item HOME X<HOME> Used if C<chdir> has no argument. =item LOGDIR X<LOGDIR> Used if C<chdir> has no argument and L</HOME> is not set. =item PATH X<PATH> Used in executing subprocesses, and in finding the program if L</-S> is used. =item PERL5LIB X<PERL5LIB> A list of directories in which to look for Perl library files before looking in the standard library. Any architecture-specific and version-specific directories, such as F<version/archname/>, F<version/>, or F<archname/> under the specified locations are automatically included if they exist, with this lookup done at interpreter startup time. In addition, any directories matching the entries in C<$Config{inc_version_list}> are added. (These typically would be for older compatible perl versions installed in the same directory tree.) If PERL5LIB is not defined, L</PERLLIB> is used. Directories are separated (like in PATH) by a colon on Unixish platforms and by a semicolon on Windows (the proper path separator being given by the command C<perl -V:I<path_sep>>). When running taint checks, either because the program was running setuid or setgid, or the L</-T> or L</-t> switch was specified, neither PERL5LIB nor L</PERLLIB> is consulted. The program should instead say: use lib "/my/directory"; =item PERL5OPT X<PERL5OPT> Command-line options (switches). Switches in this variable are treated as if they were on every Perl command line. Only the B<-[CDIMTUWdmtw]> switches are allowed. When running taint checks (either because the program was running setuid or setgid, or because the L</-T> or L</-t> switch was used), this variable is ignored. If PERL5OPT begins with B<-T>, tainting will be enabled and subsequent options ignored. If PERL5OPT begins with B<-t>, tainting will be enabled, a writable dot removed from @INC, and subsequent options honored. =item PERLIO X<PERLIO> A space (or colon) separated list of PerlIO layers. If perl is built to use PerlIO system for IO (the default) these layers affect Perl's IO. It is conventional to start layer names with a colon (for example, C<:perlio>) to emphasize their similarity to variable "attributes". But the code that parses layer specification strings, which is also used to decode the PERLIO environment variable, treats the colon as a separator. An unset or empty PERLIO is equivalent to the default set of layers for your platform; for example, C<:unix:perlio> on Unix-like systems and C<:unix:crlf> on Windows and other DOS-like systems. The list becomes the default for I<all> Perl's IO. Consequently only built-in layers can appear in this list, as external layers (such as C<:encoding()>) need IO in order to load them! See L<"open pragma"|open> for how to add external encodings as defaults. Layers it makes sense to include in the PERLIO environment variable are briefly summarized below. For more details see L<PerlIO>. =over 8 =item :crlf X<:crlf> A layer which does CRLF to C<"\n"> translation distinguishing "text" and "binary" files in the manner of MS-DOS and similar operating systems, and also provides buffering similar to C<:perlio> on these architectures. =item :perlio X<:perlio> This is a re-implementation of stdio-like buffering written as a PerlIO layer. As such it will call whatever layer is below it for its operations, typically C<:unix>. =item :stdio X<:stdio> This layer provides a PerlIO interface by wrapping system's ANSI C "stdio" library calls. The layer provides both buffering and IO. Note that the C<:stdio> layer does I<not> do CRLF translation even if that is the platform's normal behaviour. You will need a C<:crlf> layer above it to do that. =item :unix X<:unix> Low-level layer that calls C<read>, C<write>, C<lseek>, etc. =item :win32 X<:win32> On Win32 platforms this I<experimental> layer uses native "handle" IO rather than a Unix-like numeric file descriptor layer. Known to be buggy in this release (5.30). =back The default set of layers should give acceptable results on all platforms. For Unix platforms that will be the equivalent of ":unix:perlio" or ":stdio". Configure is set up to prefer the ":stdio" implementation if the system's library provides for fast access to the buffer (not common on modern architectures); otherwise, it uses the ":unix:perlio" implementation. On Win32 the default in this release (5.30) is ":unix:crlf". Win32's ":stdio" has a number of bugs/mis-features for Perl IO which are somewhat depending on the version and vendor of the C compiler. Using our own C<:crlf> layer as the buffer avoids those issues and makes things more uniform. This release (5.30) uses C<:unix> as the bottom layer on Win32, and so still uses the C compiler's numeric file descriptor routines. There is an experimental native C<:win32> layer, which is expected to be enhanced and may eventually become the default under Win32. The PERLIO environment variable is completely ignored when Perl is run in taint mode. =item PERLIO_DEBUG X<PERLIO_DEBUG> If set to the name of a file or device when Perl is run with the L<-Di|/-Dletters> command-line switch, the logging of certain operations of the PerlIO subsystem will be redirected to the specified file rather than going to stderr, which is the default. The file is opened in append mode. Typical uses are in Unix: % env PERLIO_DEBUG=/tmp/perlio.log perl -Di script ... and under Win32, the approximately equivalent: > set PERLIO_DEBUG=CON perl -Di script ... This functionality is disabled for setuid scripts, for scripts run with L</-T>, and for scripts run on a Perl built without C<-DDEBUGGING> support. =item PERLLIB X<PERLLIB> A list of directories in which to look for Perl library files before looking in the standard library. If L</PERL5LIB> is defined, PERLLIB is not used. The PERLLIB environment variable is completely ignored when Perl is run in taint mode. =item PERL5DB X<PERL5DB> The command used to load the debugger code. The default is: BEGIN { require "perl5db.pl" } The PERL5DB environment variable is only used when Perl is started with a bare L</-d> switch. =item PERL5DB_THREADED X<PERL5DB_THREADED> If set to a true value, indicates to the debugger that the code being debugged uses threads. =item PERL5SHELL (specific to the Win32 port) X<PERL5SHELL> On Win32 ports only, may be set to an alternative shell that Perl must use internally for executing "backtick" commands or system(). Default is C<cmd.exe /x/d/c> on WindowsNT and C<command.com /c> on Windows95. The value is considered space-separated. Precede any character that needs to be protected, like a space or backslash, with another backslash. Note that Perl doesn't use COMSPEC for this purpose because COMSPEC has a high degree of variability among users, leading to portability concerns. Besides, Perl can use a shell that may not be fit for interactive use, and setting COMSPEC to such a shell may interfere with the proper functioning of other programs (which usually look in COMSPEC to find a shell fit for interactive use). Before Perl 5.10.0 and 5.8.8, PERL5SHELL was not taint checked when running external commands. It is recommended that you explicitly set (or delete) C<$ENV{PERL5SHELL}> when running in taint mode under Windows. =item PERL_ALLOW_NON_IFS_LSP (specific to the Win32 port) X<PERL_ALLOW_NON_IFS_LSP> Set to 1 to allow the use of non-IFS compatible LSPs (Layered Service Providers). Perl normally searches for an IFS-compatible LSP because this is required for its emulation of Windows sockets as real filehandles. However, this may cause problems if you have a firewall such as I<McAfee Guardian>, which requires that all applications use its LSP but which is not IFS-compatible, because clearly Perl will normally avoid using such an LSP. Setting this environment variable to 1 means that Perl will simply use the first suitable LSP enumerated in the catalog, which keeps I<McAfee Guardian> happy--and in that particular case Perl still works too because I<McAfee Guardian>'s LSP actually plays other games which allow applications requiring IFS compatibility to work. =item PERL_DEBUG_MSTATS X<PERL_DEBUG_MSTATS> Relevant only if Perl is compiled with the C<malloc> included with the Perl distribution; that is, if C<perl -V:d_mymalloc> is "define". If set, this dumps out memory statistics after execution. If set to an integer greater than one, also dumps out memory statistics after compilation. =item PERL_DESTRUCT_LEVEL X<PERL_DESTRUCT_LEVEL> Controls the behaviour of global destruction of objects and other references. See L<perlhacktips/PERL_DESTRUCT_LEVEL> for more information. =item PERL_DL_NONLAZY X<PERL_DL_NONLAZY> Set to C<"1"> to have Perl resolve I<all> undefined symbols when it loads a dynamic library. The default behaviour is to resolve symbols when they are used. Setting this variable is useful during testing of extensions, as it ensures that you get an error on misspelled function names even if the test suite doesn't call them. =item PERL_ENCODING X<PERL_ENCODING> If using the C<use encoding> pragma without an explicit encoding name, the PERL_ENCODING environment variable is consulted for an encoding name. =item PERL_HASH_SEED X<PERL_HASH_SEED> (Since Perl 5.8.1, new semantics in Perl 5.18.0) Used to override the randomization of Perl's internal hash function. The value is expressed in hexadecimal, and may include a leading 0x. Truncated patterns are treated as though they are suffixed with sufficient 0's as required. If the option is provided, and C<PERL_PERTURB_KEYS> is NOT set, then a value of '0' implies C<PERL_PERTURB_KEYS=0> and any other value implies C<PERL_PERTURB_KEYS=2>. B<PLEASE NOTE: The hash seed is sensitive information>. Hashes are randomized to protect against local and remote attacks against Perl code. By manually setting a seed, this protection may be partially or completely lost. See L<perlsec/"Algorithmic Complexity Attacks">, L</PERL_PERTURB_KEYS>, and L</PERL_HASH_SEED_DEBUG> for more information. =item PERL_PERTURB_KEYS X<PERL_PERTURB_KEYS> (Since Perl 5.18.0) Set to C<"0"> or C<"NO"> then traversing keys will be repeatable from run to run for the same C<PERL_HASH_SEED>. Insertion into a hash will not change the order, except to provide for more space in the hash. When combined with setting PERL_HASH_SEED this mode is as close to pre 5.18 behavior as you can get. When set to C<"1"> or C<"RANDOM"> then traversing keys will be randomized. Every time a hash is inserted into the key order will change in a random fashion. The order may not be repeatable in a following program run even if the PERL_HASH_SEED has been specified. This is the default mode for perl. When set to C<"2"> or C<"DETERMINISTIC"> then inserting keys into a hash will cause the key order to change, but in a way that is repeatable from program run to program run. B<NOTE:> Use of this option is considered insecure, and is intended only for debugging non-deterministic behavior in Perl's hash function. Do not use it in production. See L<perlsec/"Algorithmic Complexity Attacks"> and L</PERL_HASH_SEED> and L</PERL_HASH_SEED_DEBUG> for more information. You can get and set the key traversal mask for a specific hash by using the C<hash_traversal_mask()> function from L<Hash::Util>. =item PERL_HASH_SEED_DEBUG X<PERL_HASH_SEED_DEBUG> (Since Perl 5.8.1.) Set to C<"1"> to display (to STDERR) information about the hash function, seed, and what type of key traversal randomization is in effect at the beginning of execution. This, combined with L</PERL_HASH_SEED> and L</PERL_PERTURB_KEYS> is intended to aid in debugging nondeterministic behaviour caused by hash randomization. B<Note> that any information about the hash function, especially the hash seed is B<sensitive information>: by knowing it, one can craft a denial-of-service attack against Perl code, even remotely; see L<perlsec/"Algorithmic Complexity Attacks"> for more information. B<Do not disclose the hash seed> to people who don't need to know it. See also L<C<hash_seed()>|Hash::Util/hash_seed> and L<C<hash_traversal_mask()>|Hash::Util/hash_traversal_mask>. An example output might be: HASH_FUNCTION = ONE_AT_A_TIME_HARD HASH_SEED = 0x652e9b9349a7a032 PERTURB_KEYS = 1 (RANDOM) =item PERL_MEM_LOG X<PERL_MEM_LOG> If your Perl was configured with B<-Accflags=-DPERL_MEM_LOG>, setting the environment variable C<PERL_MEM_LOG> enables logging debug messages. The value has the form C<< <I<number>>[m][s][t] >>, where C<I<number>> is the file descriptor number you want to write to (2 is default), and the combination of letters specifies that you want information about (m)emory and/or (s)v, optionally with (t)imestamps. For example, C<PERL_MEM_LOG=1mst> logs all information to stdout. You can write to other opened file descriptors in a variety of ways: $ 3>foo3 PERL_MEM_LOG=3m perl ... =item PERL_ROOT (specific to the VMS port) X<PERL_ROOT> A translation-concealed rooted logical name that contains Perl and the logical device for the @INC path on VMS only. Other logical names that affect Perl on VMS include PERLSHR, PERL_ENV_TABLES, and SYS$TIMEZONE_DIFFERENTIAL, but are optional and discussed further in L<perlvms> and in F<README.vms> in the Perl source distribution. =item PERL_SIGNALS X<PERL_SIGNALS> Available in Perls 5.8.1 and later. If set to C<"unsafe">, the pre-Perl-5.8.0 signal behaviour (which is immediate but unsafe) is restored. If set to C<safe>, then safe (but deferred) signals are used. See L<perlipc/"Deferred Signals (Safe Signals)">. =item PERL_UNICODE X<PERL_UNICODE> Equivalent to the L<-C|/-C [numberE<sol>list]> command-line switch. Note that this is not a boolean variable. Setting this to C<"1"> is not the right way to "enable Unicode" (whatever that would mean). You can use C<"0"> to "disable Unicode", though (or alternatively unset PERL_UNICODE in your shell before starting Perl). See the description of the L<-C|/-C [numberE<sol>list]> switch for more information. =item PERL_USE_UNSAFE_INC X<PERL_USE_UNSAFE_INC> If perl has been configured to not have the current directory in L<C<@INC>|perlvar/@INC> by default, this variable can be set to C<"1"> to reinstate it. It's primarily intended for use while building and testing modules that have not been updated to deal with "." not being in C<@INC> and should not be set in the environment for day-to-day use. =item SYS$LOGIN (specific to the VMS port) X<SYS$LOGIN> Used if chdir has no argument and L</HOME> and L</LOGDIR> are not set. =item PERL_INTERNAL_RAND_SEED X<PERL_INTERNAL_RAND_SEED> Set to a non-negative integer to seed the random number generator used internally by perl for a variety of purposes. Ignored if perl is run setuid or setgid. Used only for some limited startup randomization (hash keys) if C<-T> or C<-t> perl is started with tainting enabled. Perl may be built to ignore this variable. =back Perl also has environment variables that control how Perl handles data specific to particular natural languages; see L<perllocale>. Perl and its various modules and components, including its test frameworks, may sometimes make use of certain other environment variables. Some of these are specific to a particular platform. Please consult the appropriate module documentation and any documentation for your platform (like L<perlsolaris>, L<perllinux>, L<perlmacosx>, L<perlwin32>, etc) for variables peculiar to those specific situations. Perl makes all environment variables available to the program being executed, and passes these along to any child processes it starts. However, programs running setuid would do well to execute the following lines before doing anything else, just to keep people honest: $ENV{PATH} = "/bin:/usr/bin"; # or whatever you need $ENV{SHELL} = "/bin/sh" if exists $ENV{SHELL}; delete @ENV{qw(IFS CDPATH ENV BASH_ENV)}; =head1 ORDER OF APPLICATION Some options, in particular C<-I>, C<-M>, C<PERL5LIB> and C<PERL5OPT> can interact, and the order in which they are applied is important. Note that this section does not document what I<actually> happens inside the perl interpreter, it documents what I<effectively> happens. =over =item -I The effect of multiple C<-I> options is to C<unshift> them onto C<@INC> from right to left. So for example: perl -I 1 -I 2 -I 3 will first prepend C<3> onto the front of C<@INC>, then prepend C<2>, and then prepend C<1>. The result is that C<@INC> begins with: qw(1 2 3) =item -M Multiple C<-M> options are processed from left to right. So this: perl -Mlib=1 -Mlib=2 -Mlib=3 will first use the L<lib> pragma to prepend C<1> to C<@INC>, then it will prepend C<2>, then it will prepend C<3>, resulting in an C<@INC> that begins with: qw(3 2 1) =item the PERL5LIB environment variable This contains a list of directories, separated by colons. The entire list is prepended to C<@INC> in one go. This: PERL5LIB=1:2:3 perl will result in an C<@INC> that begins with: qw(1 2 3) =item combinations of -I, -M and PERL5LIB C<PERL5LIB> is applied first, then all the C<-I> arguments, then all the C<-M> arguments. This: PERL5LIB=e1:e2 perl -I i1 -Mlib=m1 -I i2 -Mlib=m2 will result in an C<@INC> that begins with: qw(m2 m1 i1 i2 e1 e2) =item the PERL5OPT environment variable This contains a space separated list of switches. We only consider the effects of C<-M> and C<-I> in this section. After normal processing of C<-I> switches from the command line, all the C<-I> switches in C<PERL5OPT> are extracted. They are processed from left to right instead of from right to left. Also note that while whitespace is allowed between a C<-I> and its directory on the command line, it is not allowed in C<PERL5OPT>. After normal processing of C<-M> switches from the command line, all the C<-M> switches in C<PERL5OPT> are extracted. They are processed from left to right, I<i.e.> the same as those on the command line. An example may make this clearer: export PERL5OPT="-Mlib=optm1 -Iopti1 -Mlib=optm2 -Iopti2" export PERL5LIB=e1:e2 perl -I i1 -Mlib=m1 -I i2 -Mlib=m2 will result in an C<@INC> that begins with: qw( optm2 optm1 m2 m1 opti2 opti1 i1 i2 e1 e2 ) =item Other complications There are some complications that are ignored in the examples above: =over =item arch and version subdirs All of C<-I>, C<PERL5LIB> and C<use lib> will also prepend arch and version subdirs if they are present =item sitecustomize.pl =back =back perlre.pod 0000644 00000377401 15125556335 0006567 0 ustar 00 =head1 NAME X<regular expression> X<regex> X<regexp> perlre - Perl regular expressions =head1 DESCRIPTION This page describes the syntax of regular expressions in Perl. If you haven't used regular expressions before, a tutorial introduction is available in L<perlretut>. If you know just a little about them, a quick-start introduction is available in L<perlrequick>. Except for L</The Basics> section, this page assumes you are familiar with regular expression basics, like what is a "pattern", what does it look like, and how it is basically used. For a reference on how they are used, plus various examples of the same, see discussions of C<m//>, C<s///>, C<qr//> and C<"??"> in L<perlop/"Regexp Quote-Like Operators">. New in v5.22, L<C<use re 'strict'>|re/'strict' mode> applies stricter rules than otherwise when compiling regular expression patterns. It can find things that, while legal, may not be what you intended. =head2 The Basics X<regular expression, version 8> X<regex, version 8> X<regexp, version 8> Regular expressions are strings with the very particular syntax and meaning described in this document and auxiliary documents referred to by this one. The strings are called "patterns". Patterns are used to determine if some other string, called the "target", has (or doesn't have) the characteristics specified by the pattern. We call this "matching" the target string against the pattern. Usually the match is done by having the target be the first operand, and the pattern be the second operand, of one of the two binary operators C<=~> and C<!~>, listed in L<perlop/Binding Operators>; and the pattern will have been converted from an ordinary string by one of the operators in L<perlop/"Regexp Quote-Like Operators">, like so: $foo =~ m/abc/ This evaluates to true if and only if the string in the variable C<$foo> contains somewhere in it, the sequence of characters "a", "b", then "c". (The C<=~ m>, or match operator, is described in L<perlop/m/PATTERN/msixpodualngc>.) Patterns that aren't already stored in some variable must be delimitted, at both ends, by delimitter characters. These are often, as in the example above, forward slashes, and the typical way a pattern is written in documentation is with those slashes. In most cases, the delimitter is the same character, fore and aft, but there are a few cases where a character looks like it has a mirror-image mate, where the opening version is the beginning delimiter, and the closing one is the ending delimiter, like $foo =~ m<abc> Most times, the pattern is evaluated in double-quotish context, but it is possible to choose delimiters to force single-quotish, like $foo =~ m'abc' If the pattern contains its delimiter within it, that delimiter must be escaped. Prefixing it with a backslash (I<e.g.>, C<"/foo\/bar/">) serves this purpose. Any single character in a pattern matches that same character in the target string, unless the character is a I<metacharacter> with a special meaning described in this document. A sequence of non-metacharacters matches the same sequence in the target string, as we saw above with C<m/abc/>. Only a few characters (all of them being ASCII punctuation characters) are metacharacters. The most commonly used one is a dot C<".">, which normally matches almost any character (including a dot itself). You can cause characters that normally function as metacharacters to be interpreted literally by prefixing them with a C<"\">, just like the pattern's delimiter must be escaped if it also occurs within the pattern. Thus, C<"\."> matches just a literal dot, C<"."> instead of its normal meaning. This means that the backslash is also a metacharacter, so C<"\\"> matches a single C<"\">. And a sequence that contains an escaped metacharacter matches the same sequence (but without the escape) in the target string. So, the pattern C</blur\\fl/> would match any target string that contains the sequence C<"blur\fl">. The metacharacter C<"|"> is used to match one thing or another. Thus $foo =~ m/this|that/ is TRUE if and only if C<$foo> contains either the sequence C<"this"> or the sequence C<"that">. Like all metacharacters, prefixing the C<"|"> with a backslash makes it match the plain punctuation character; in its case, the VERTICAL LINE. $foo =~ m/this\|that/ is TRUE if and only if C<$foo> contains the sequence C<"this|that">. You aren't limited to just a single C<"|">. $foo =~ m/fee|fie|foe|fum/ is TRUE if and only if C<$foo> contains any of those 4 sequences from the children's story "Jack and the Beanstalk". As you can see, the C<"|"> binds less tightly than a sequence of ordinary characters. We can override this by using the grouping metacharacters, the parentheses C<"("> and C<")">. $foo =~ m/th(is|at) thing/ is TRUE if and only if C<$foo> contains either the sequence S<C<"this thing">> or the sequence S<C<"that thing">>. The portions of the string that match the portions of the pattern enclosed in parentheses are normally made available separately for use later in the pattern, substitution, or program. This is called "capturing", and it can get complicated. See L</Capture groups>. The first alternative includes everything from the last pattern delimiter (C<"(">, C<"(?:"> (described later), I<etc>. or the beginning of the pattern) up to the first C<"|">, and the last alternative contains everything from the last C<"|"> to the next closing pattern delimiter. That's why it's common practice to include alternatives in parentheses: to minimize confusion about where they start and end. Alternatives are tried from left to right, so the first alternative found for which the entire expression matches, is the one that is chosen. This means that alternatives are not necessarily greedy. For example: when matching C<foo|foot> against C<"barefoot">, only the C<"foo"> part will match, as that is the first alternative tried, and it successfully matches the target string. (This might not seem important, but it is important when you are capturing matched text using parentheses.) Besides taking away the special meaning of a metacharacter, a prefixed backslash changes some letter and digit characters away from matching just themselves to instead have special meaning. These are called "escape sequences", and all such are described in L<perlrebackslash>. A backslash sequence (of a letter or digit) that doesn't currently have special meaning to Perl will raise a warning if warnings are enabled, as those are reserved for potential future use. One such sequence is C<\b>, which matches a boundary of some sort. C<\b{wb}> and a few others give specialized types of boundaries. (They are all described in detail starting at L<perlrebackslash/\b{}, \b, \B{}, \B>.) Note that these don't match characters, but the zero-width spaces between characters. They are an example of a L<zero-width assertion|/Assertions>. Consider again, $foo =~ m/fee|fie|foe|fum/ It evaluates to TRUE if, besides those 4 words, any of the sequences "feed", "field", "Defoe", "fume", and many others are in C<$foo>. By judicious use of C<\b> (or better (because it is designed to handle natural language) C<\b{wb}>), we can make sure that only the Giant's words are matched: $foo =~ m/\b(fee|fie|foe|fum)\b/ $foo =~ m/\b{wb}(fee|fie|foe|fum)\b{wb}/ The final example shows that the characters C<"{"> and C<"}"> are metacharacters. Another use for escape sequences is to specify characters that cannot (or which you prefer not to) be written literally. These are described in detail in L<perlrebackslash/Character Escapes>, but the next three paragraphs briefly describe some of them. Various control characters can be written in C language style: C<"\n"> matches a newline, C<"\t"> a tab, C<"\r"> a carriage return, C<"\f"> a form feed, I<etc>. More generally, C<\I<nnn>>, where I<nnn> is a string of three octal digits, matches the character whose native code point is I<nnn>. You can easily run into trouble if you don't have exactly three digits. So always use three, or since Perl 5.14, you can use C<\o{...}> to specify any number of octal digits. Similarly, C<\xI<nn>>, where I<nn> are hexadecimal digits, matches the character whose native ordinal is I<nn>. Again, not using exactly two digits is a recipe for disaster, but you can use C<\x{...}> to specify any number of hex digits. Besides being a metacharacter, the C<"."> is an example of a "character class", something that can match any single character of a given set of them. In its case, the set is just about all possible characters. Perl predefines several character classes besides the C<".">; there is a separate reference page about just these, L<perlrecharclass>. You can define your own custom character classes, by putting into your pattern in the appropriate place(s), a list of all the characters you want in the set. You do this by enclosing the list within C<[]> bracket characters. These are called "bracketed character classes" when we are being precise, but often the word "bracketed" is dropped. (Dropping it usually doesn't cause confusion.) This means that the C<"["> character is another metacharacter. It doesn't match anything just by itself; it is used only to tell Perl that what follows it is a bracketed character class. If you want to match a literal left square bracket, you must escape it, like C<"\[">. The matching C<"]"> is also a metacharacter; again it doesn't match anything by itself, but just marks the end of your custom class to Perl. It is an example of a "sometimes metacharacter". It isn't a metacharacter if there is no corresponding C<"[">, and matches its literal self: print "]" =~ /]/; # prints 1 The list of characters within the character class gives the set of characters matched by the class. C<"[abc]"> matches a single "a" or "b" or "c". But if the first character after the C<"["> is C<"^">, the class instead matches any character not in the list. Within a list, the C<"-"> character specifies a range of characters, so that C<a-z> represents all characters between "a" and "z", inclusive. If you want either C<"-"> or C<"]"> itself to be a member of a class, put it at the start of the list (possibly after a C<"^">), or escape it with a backslash. C<"-"> is also taken literally when it is at the end of the list, just before the closing C<"]">. (The following all specify the same class of three characters: C<[-az]>, C<[az-]>, and C<[a\-z]>. All are different from C<[a-z]>, which specifies a class containing twenty-six characters, even on EBCDIC-based character sets.) There is lots more to bracketed character classes; full details are in L<perlrecharclass/Bracketed Character Classes>. =head3 Metacharacters X<metacharacter> X<\> X<^> X<.> X<$> X<|> X<(> X<()> X<[> X<[]> L</The Basics> introduced some of the metacharacters. This section gives them all. Most of them have the same meaning as in the I<egrep> command. Only the C<"\"> is always a metacharacter. The others are metacharacters just sometimes. The following tables lists all of them, summarizes their use, and gives the contexts where they are metacharacters. Outside those contexts or if prefixed by a C<"\">, they match their corresponding punctuation character. In some cases, their meaning varies depending on various pattern modifiers that alter the default behaviors. See L</Modifiers>. PURPOSE WHERE \ Escape the next character Always, except when escaped by another \ ^ Match the beginning of the string Not in [] (or line, if /m is used) ^ Complement the [] class At the beginning of [] . Match any single character except newline Not in [] (under /s, includes newline) $ Match the end of the string Not in [], but can (or before newline at the end of the mean interpolate a string; or before any newline if /m is scalar used) | Alternation Not in [] () Grouping Not in [] [ Start Bracketed Character class Not in [] ] End Bracketed Character class Only in [], and not first * Matches the preceding element 0 or more Not in [] times + Matches the preceding element 1 or more Not in [] times ? Matches the preceding element 0 or 1 Not in [] times { Starts a sequence that gives number(s) Not in [] of times the preceding element can be matched { when following certain escape sequences starts a modifier to the meaning of the sequence } End sequence started by { - Indicates a range Only in [] interior # Beginning of comment, extends to line end Only with /x modifier Notice that most of the metacharacters lose their special meaning when they occur in a bracketed character class, except C<"^"> has a different meaning when it is at the beginning of such a class. And C<"-"> and C<"]"> are metacharacters only at restricted positions within bracketed character classes; while C<"}"> is a metacharacter only when closing a special construct started by C<"{">. In double-quotish context, as is usually the case, you need to be careful about C<"$"> and the non-metacharacter C<"@">. Those could interpolate variables, which may or may not be what you intended. These rules were designed for compactness of expression, rather than legibility and maintainability. The L</E<sol>x and E<sol>xx> pattern modifiers allow you to insert white space to improve readability. And use of S<C<L<re 'strict'|re/'strict' mode>>> adds extra checking to catch some typos that might silently compile into something unintended. By default, the C<"^"> character is guaranteed to match only the beginning of the string, the C<"$"> character only the end (or before the newline at the end), and Perl does certain optimizations with the assumption that the string contains only one line. Embedded newlines will not be matched by C<"^"> or C<"$">. You may, however, wish to treat a string as a multi-line buffer, such that the C<"^"> will match after any newline within the string (except if the newline is the last character in the string), and C<"$"> will match before any newline. At the cost of a little more overhead, you can do this by using the L</C<E<sol>m>> modifier on the pattern match operator. (Older programs did this by setting C<$*>, but this option was removed in perl 5.10.) X<^> X<$> X</m> To simplify multi-line substitutions, the C<"."> character never matches a newline unless you use the L<C<E<sol>s>|/s> modifier, which in effect tells Perl to pretend the string is a single line--even if it isn't. X<.> X</s> =head2 Modifiers =head3 Overview The default behavior for matching can be changed, using various modifiers. Modifiers that relate to the interpretation of the pattern are listed just below. Modifiers that alter the way a pattern is used by Perl are detailed in L<perlop/"Regexp Quote-Like Operators"> and L<perlop/"Gory details of parsing quoted constructs">. =over 4 =item B<C<m>> X</m> X<regex, multiline> X<regexp, multiline> X<regular expression, multiline> Treat the string being matched against as multiple lines. That is, change C<"^"> and C<"$"> from matching the start of the string's first line and the end of its last line to matching the start and end of each line within the string. =item B<C<s>> X</s> X<regex, single-line> X<regexp, single-line> X<regular expression, single-line> Treat the string as single line. That is, change C<"."> to match any character whatsoever, even a newline, which normally it would not match. Used together, as C</ms>, they let the C<"."> match any character whatsoever, while still allowing C<"^"> and C<"$"> to match, respectively, just after and just before newlines within the string. =item B<C<i>> X</i> X<regex, case-insensitive> X<regexp, case-insensitive> X<regular expression, case-insensitive> Do case-insensitive pattern matching. For example, "A" will match "a" under C</i>. If locale matching rules are in effect, the case map is taken from the current locale for code points less than 255, and from Unicode rules for larger code points. However, matches that would cross the Unicode rules/non-Unicode rules boundary (ords 255/256) will not succeed, unless the locale is a UTF-8 one. See L<perllocale>. There are a number of Unicode characters that match a sequence of multiple characters under C</i>. For example, C<LATIN SMALL LIGATURE FI> should match the sequence C<fi>. Perl is not currently able to do this when the multiple characters are in the pattern and are split between groupings, or when one or more are quantified. Thus "\N{LATIN SMALL LIGATURE FI}" =~ /fi/i; # Matches "\N{LATIN SMALL LIGATURE FI}" =~ /[fi][fi]/i; # Doesn't match! "\N{LATIN SMALL LIGATURE FI}" =~ /fi*/i; # Doesn't match! # The below doesn't match, and it isn't clear what $1 and $2 would # be even if it did!! "\N{LATIN SMALL LIGATURE FI}" =~ /(f)(i)/i; # Doesn't match! Perl doesn't match multiple characters in a bracketed character class unless the character that maps to them is explicitly mentioned, and it doesn't match them at all if the character class is inverted, which otherwise could be highly confusing. See L<perlrecharclass/Bracketed Character Classes>, and L<perlrecharclass/Negation>. =item B<C<x>> and B<C<xx>> X</x> Extend your pattern's legibility by permitting whitespace and comments. Details in L</E<sol>x and E<sol>xx> =item B<C<p>> X</p> X<regex, preserve> X<regexp, preserve> Preserve the string matched such that C<${^PREMATCH}>, C<${^MATCH}>, and C<${^POSTMATCH}> are available for use after matching. In Perl 5.20 and higher this is ignored. Due to a new copy-on-write mechanism, C<${^PREMATCH}>, C<${^MATCH}>, and C<${^POSTMATCH}> will be available after the match regardless of the modifier. =item B<C<a>>, B<C<d>>, B<C<l>>, and B<C<u>> X</a> X</d> X</l> X</u> These modifiers, all new in 5.14, affect which character-set rules (Unicode, I<etc>.) are used, as described below in L</Character set modifiers>. =item B<C<n>> X</n> X<regex, non-capture> X<regexp, non-capture> X<regular expression, non-capture> Prevent the grouping metacharacters C<()> from capturing. This modifier, new in 5.22, will stop C<$1>, C<$2>, I<etc>... from being filled in. "hello" =~ /(hi|hello)/; # $1 is "hello" "hello" =~ /(hi|hello)/n; # $1 is undef This is equivalent to putting C<?:> at the beginning of every capturing group: "hello" =~ /(?:hi|hello)/; # $1 is undef C</n> can be negated on a per-group basis. Alternatively, named captures may still be used. "hello" =~ /(?-n:(hi|hello))/n; # $1 is "hello" "hello" =~ /(?<greet>hi|hello)/n; # $1 is "hello", $+{greet} is # "hello" =item Other Modifiers There are a number of flags that can be found at the end of regular expression constructs that are I<not> generic regular expression flags, but apply to the operation being performed, like matching or substitution (C<m//> or C<s///> respectively). Flags described further in L<perlretut/"Using regular expressions in Perl"> are: c - keep the current position during repeated matching g - globally match the pattern repeatedly in the string Substitution-specific modifiers described in L<perlop/"s/PATTERN/REPLACEMENT/msixpodualngcer"> are: e - evaluate the right-hand side as an expression ee - evaluate the right side as a string then eval the result o - pretend to optimize your code, but actually introduce bugs r - perform non-destructive substitution and return the new value =back Regular expression modifiers are usually written in documentation as I<e.g.>, "the C</x> modifier", even though the delimiter in question might not really be a slash. The modifiers C</imnsxadlup> may also be embedded within the regular expression itself using the C<(?...)> construct, see L</Extended Patterns> below. =head3 Details on some modifiers Some of the modifiers require more explanation than given in the L</Overview> above. =head4 C</x> and C</xx> A single C</x> tells the regular expression parser to ignore most whitespace that is neither backslashed nor within a bracketed character class. You can use this to break up your regular expression into more readable parts. Also, the C<"#"> character is treated as a metacharacter introducing a comment that runs up to the pattern's closing delimiter, or to the end of the current line if the pattern extends onto the next line. Hence, this is very much like an ordinary Perl code comment. (You can include the closing delimiter within the comment only if you precede it with a backslash, so be careful!) Use of C</x> means that if you want real whitespace or C<"#"> characters in the pattern (outside a bracketed character class, which is unaffected by C</x>), then you'll either have to escape them (using backslashes or C<\Q...\E>) or encode them using octal, hex, or C<\N{}> or C<\p{name=...}> escapes. It is ineffective to try to continue a comment onto the next line by escaping the C<\n> with a backslash or C<\Q>. You can use L</(?#text)> to create a comment that ends earlier than the end of the current line, but C<text> also can't contain the closing delimiter unless escaped with a backslash. A common pitfall is to forget that C<"#"> characters begin a comment under C</x> and are not matched literally. Just keep that in mind when trying to puzzle out why a particular C</x> pattern isn't working as expected. Starting in Perl v5.26, if the modifier has a second C<"x"> within it, it does everything that a single C</x> does, but additionally non-backslashed SPACE and TAB characters within bracketed character classes are also generally ignored, and hence can be added to make the classes more readable. / [d-e g-i 3-7]/xx /[ ! @ " # $ % ^ & * () = ? <> ' ]/xx may be easier to grasp than the squashed equivalents /[d-eg-i3-7]/ /[!@"#$%^&*()=?<>']/ Taken together, these features go a long way towards making Perl's regular expressions more readable. Here's an example: # Delete (most) C comments. $program =~ s { /\* # Match the opening delimiter. .*? # Match a minimal number of characters. \*/ # Match the closing delimiter. } []gsx; Note that anything inside a C<\Q...\E> stays unaffected by C</x>. And note that C</x> doesn't affect space interpretation within a single multi-character construct. For example in C<\x{...}>, regardless of the C</x> modifier, there can be no spaces. Same for a L<quantifier|/Quantifiers> such as C<{3}> or C<{5,}>. Similarly, C<(?:...)> can't have a space between the C<"(">, C<"?">, and C<":">. Within any delimiters for such a construct, allowed spaces are not affected by C</x>, and depend on the construct. For example, C<\x{...}> can't have spaces because hexadecimal numbers don't have spaces in them. But, Unicode properties can have spaces, so in C<\p{...}> there can be spaces that follow the Unicode rules, for which see L<perluniprops/Properties accessible through \p{} and \P{}>. X</x> The set of characters that are deemed whitespace are those that Unicode calls "Pattern White Space", namely: U+0009 CHARACTER TABULATION U+000A LINE FEED U+000B LINE TABULATION U+000C FORM FEED U+000D CARRIAGE RETURN U+0020 SPACE U+0085 NEXT LINE U+200E LEFT-TO-RIGHT MARK U+200F RIGHT-TO-LEFT MARK U+2028 LINE SEPARATOR U+2029 PARAGRAPH SEPARATOR =head4 Character set modifiers C</d>, C</u>, C</a>, and C</l>, available starting in 5.14, are called the character set modifiers; they affect the character set rules used for the regular expression. The C</d>, C</u>, and C</l> modifiers are not likely to be of much use to you, and so you need not worry about them very much. They exist for Perl's internal use, so that complex regular expression data structures can be automatically serialized and later exactly reconstituted, including all their nuances. But, since Perl can't keep a secret, and there may be rare instances where they are useful, they are documented here. The C</a> modifier, on the other hand, may be useful. Its purpose is to allow code that is to work mostly on ASCII data to not have to concern itself with Unicode. Briefly, C</l> sets the character set to that of whatever B<L>ocale is in effect at the time of the execution of the pattern match. C</u> sets the character set to B<U>nicode. C</a> also sets the character set to Unicode, BUT adds several restrictions for B<A>SCII-safe matching. C</d> is the old, problematic, pre-5.14 B<D>efault character set behavior. Its only use is to force that old behavior. At any given time, exactly one of these modifiers is in effect. Their existence allows Perl to keep the originally compiled behavior of a regular expression, regardless of what rules are in effect when it is actually executed. And if it is interpolated into a larger regex, the original's rules continue to apply to it, and don't affect the other parts. The C</l> and C</u> modifiers are automatically selected for regular expressions compiled within the scope of various pragmas, and we recommend that in general, you use those pragmas instead of specifying these modifiers explicitly. For one thing, the modifiers affect only pattern matching, and do not extend to even any replacement done, whereas using the pragmas gives consistent results for all appropriate operations within their scopes. For example, s/foo/\Ubar/il will match "foo" using the locale's rules for case-insensitive matching, but the C</l> does not affect how the C<\U> operates. Most likely you want both of them to use locale rules. To do this, instead compile the regular expression within the scope of C<use locale>. This both implicitly adds the C</l>, and applies locale rules to the C<\U>. The lesson is to C<use locale>, and not C</l> explicitly. Similarly, it would be better to use C<use feature 'unicode_strings'> instead of, s/foo/\Lbar/iu to get Unicode rules, as the C<\L> in the former (but not necessarily the latter) would also use Unicode rules. More detail on each of the modifiers follows. Most likely you don't need to know this detail for C</l>, C</u>, and C</d>, and can skip ahead to L<E<sol>a|/E<sol>a (and E<sol>aa)>. =head4 /l means to use the current locale's rules (see L<perllocale>) when pattern matching. For example, C<\w> will match the "word" characters of that locale, and C<"/i"> case-insensitive matching will match according to the locale's case folding rules. The locale used will be the one in effect at the time of execution of the pattern match. This may not be the same as the compilation-time locale, and can differ from one match to another if there is an intervening call of the L<setlocale() function|perllocale/The setlocale function>. Prior to v5.20, Perl did not support multi-byte locales. Starting then, UTF-8 locales are supported. No other multi byte locales are ever likely to be supported. However, in all locales, one can have code points above 255 and these will always be treated as Unicode no matter what locale is in effect. Under Unicode rules, there are a few case-insensitive matches that cross the 255/256 boundary. Except for UTF-8 locales in Perls v5.20 and later, these are disallowed under C</l>. For example, 0xFF (on ASCII platforms) does not caselessly match the character at 0x178, C<LATIN CAPITAL LETTER Y WITH DIAERESIS>, because 0xFF may not be C<LATIN SMALL LETTER Y WITH DIAERESIS> in the current locale, and Perl has no way of knowing if that character even exists in the locale, much less what code point it is. In a UTF-8 locale in v5.20 and later, the only visible difference between locale and non-locale in regular expressions should be tainting (see L<perlsec>). This modifier may be specified to be the default by C<use locale>, but see L</Which character set modifier is in effect?>. X</l> =head4 /u means to use Unicode rules when pattern matching. On ASCII platforms, this means that the code points between 128 and 255 take on their Latin-1 (ISO-8859-1) meanings (which are the same as Unicode's). (Otherwise Perl considers their meanings to be undefined.) Thus, under this modifier, the ASCII platform effectively becomes a Unicode platform; and hence, for example, C<\w> will match any of the more than 100_000 word characters in Unicode. Unlike most locales, which are specific to a language and country pair, Unicode classifies all the characters that are letters I<somewhere> in the world as C<\w>. For example, your locale might not think that C<LATIN SMALL LETTER ETH> is a letter (unless you happen to speak Icelandic), but Unicode does. Similarly, all the characters that are decimal digits somewhere in the world will match C<\d>; this is hundreds, not 10, possible matches. And some of those digits look like some of the 10 ASCII digits, but mean a different number, so a human could easily think a number is a different quantity than it really is. For example, C<BENGALI DIGIT FOUR> (U+09EA) looks very much like an C<ASCII DIGIT EIGHT> (U+0038), and C<LEPCHA DIGIT SIX> (U+1C46) looks very much like an C<ASCII DIGIT FIVE> (U+0035). And, C<\d+>, may match strings of digits that are a mixture from different writing systems, creating a security issue. A fraudulent website, for example, could display the price of something using U+1C46, and it would appear to the user that something cost 500 units, but it really costs 600. A browser that enforced script runs (L</Script Runs>) would prevent that fraudulent display. L<Unicode::UCD/num()> can also be used to sort this out. Or the C</a> modifier can be used to force C<\d> to match just the ASCII 0 through 9. Also, under this modifier, case-insensitive matching works on the full set of Unicode characters. The C<KELVIN SIGN>, for example matches the letters "k" and "K"; and C<LATIN SMALL LIGATURE FF> matches the sequence "ff", which, if you're not prepared, might make it look like a hexadecimal constant, presenting another potential security issue. See L<https://unicode.org/reports/tr36> for a detailed discussion of Unicode security issues. This modifier may be specified to be the default by C<use feature 'unicode_strings>, C<use locale ':not_characters'>, or C<L<use 5.012|perlfunc/use VERSION>> (or higher), but see L</Which character set modifier is in effect?>. X</u> =head4 /d This modifier means to use the "Default" native rules of the platform except when there is cause to use Unicode rules instead, as follows: =over 4 =item 1 the target string is encoded in UTF-8; or =item 2 the pattern is encoded in UTF-8; or =item 3 the pattern explicitly mentions a code point that is above 255 (say by C<\x{100}>); or =item 4 the pattern uses a Unicode name (C<\N{...}>); or =item 5 the pattern uses a Unicode property (C<\p{...}> or C<\P{...}>); or =item 6 the pattern uses a Unicode break (C<\b{...}> or C<\B{...}>); or =item 7 the pattern uses L</C<(?[ ])>> =item 8 the pattern uses L<C<(*script_run: ...)>|/Script Runs> =back Another mnemonic for this modifier is "Depends", as the rules actually used depend on various things, and as a result you can get unexpected results. See L<perlunicode/The "Unicode Bug">. The Unicode Bug has become rather infamous, leading to yet another (without swearing) name for this modifier, "Dodgy". Unless the pattern or string are encoded in UTF-8, only ASCII characters can match positively. Here are some examples of how that works on an ASCII platform: $str = "\xDF"; # $str is not in UTF-8 format. $str =~ /^\w/; # No match, as $str isn't in UTF-8 format. $str .= "\x{0e0b}"; # Now $str is in UTF-8 format. $str =~ /^\w/; # Match! $str is now in UTF-8 format. chop $str; $str =~ /^\w/; # Still a match! $str remains in UTF-8 format. This modifier is automatically selected by default when none of the others are, so yet another name for it is "Default". Because of the unexpected behaviors associated with this modifier, you probably should only explicitly use it to maintain weird backward compatibilities. =head4 /a (and /aa) This modifier stands for ASCII-restrict (or ASCII-safe). This modifier may be doubled-up to increase its effect. When it appears singly, it causes the sequences C<\d>, C<\s>, C<\w>, and the Posix character classes to match only in the ASCII range. They thus revert to their pre-5.6, pre-Unicode meanings. Under C</a>, C<\d> always means precisely the digits C<"0"> to C<"9">; C<\s> means the five characters C<[ \f\n\r\t]>, and starting in Perl v5.18, the vertical tab; C<\w> means the 63 characters C<[A-Za-z0-9_]>; and likewise, all the Posix classes such as C<[[:print:]]> match only the appropriate ASCII-range characters. This modifier is useful for people who only incidentally use Unicode, and who do not wish to be burdened with its complexities and security concerns. With C</a>, one can write C<\d> with confidence that it will only match ASCII characters, and should the need arise to match beyond ASCII, you can instead use C<\p{Digit}> (or C<\p{Word}> for C<\w>). There are similar C<\p{...}> constructs that can match beyond ASCII both white space (see L<perlrecharclass/Whitespace>), and Posix classes (see L<perlrecharclass/POSIX Character Classes>). Thus, this modifier doesn't mean you can't use Unicode, it means that to get Unicode matching you must explicitly use a construct (C<\p{}>, C<\P{}>) that signals Unicode. As you would expect, this modifier causes, for example, C<\D> to mean the same thing as C<[^0-9]>; in fact, all non-ASCII characters match C<\D>, C<\S>, and C<\W>. C<\b> still means to match at the boundary between C<\w> and C<\W>, using the C</a> definitions of them (similarly for C<\B>). Otherwise, C</a> behaves like the C</u> modifier, in that case-insensitive matching uses Unicode rules; for example, "k" will match the Unicode C<\N{KELVIN SIGN}> under C</i> matching, and code points in the Latin1 range, above ASCII will have Unicode rules when it comes to case-insensitive matching. To forbid ASCII/non-ASCII matches (like "k" with C<\N{KELVIN SIGN}>), specify the C<"a"> twice, for example C</aai> or C</aia>. (The first occurrence of C<"a"> restricts the C<\d>, I<etc>., and the second occurrence adds the C</i> restrictions.) But, note that code points outside the ASCII range will use Unicode rules for C</i> matching, so the modifier doesn't really restrict things to just ASCII; it just forbids the intermixing of ASCII and non-ASCII. To summarize, this modifier provides protection for applications that don't wish to be exposed to all of Unicode. Specifying it twice gives added protection. This modifier may be specified to be the default by C<use re '/a'> or C<use re '/aa'>. If you do so, you may actually have occasion to use the C</u> modifier explicitly if there are a few regular expressions where you do want full Unicode rules (but even here, it's best if everything were under feature C<"unicode_strings">, along with the C<use re '/aa'>). Also see L</Which character set modifier is in effect?>. X</a> X</aa> =head4 Which character set modifier is in effect? Which of these modifiers is in effect at any given point in a regular expression depends on a fairly complex set of interactions. These have been designed so that in general you don't have to worry about it, but this section gives the gory details. As explained below in L</Extended Patterns> it is possible to explicitly specify modifiers that apply only to portions of a regular expression. The innermost always has priority over any outer ones, and one applying to the whole expression has priority over any of the default settings that are described in the remainder of this section. The C<L<use re 'E<sol>foo'|re/"'/flags' mode">> pragma can be used to set default modifiers (including these) for regular expressions compiled within its scope. This pragma has precedence over the other pragmas listed below that also change the defaults. Otherwise, C<L<use locale|perllocale>> sets the default modifier to C</l>; and C<L<use feature 'unicode_strings|feature>>, or C<L<use 5.012|perlfunc/use VERSION>> (or higher) set the default to C</u> when not in the same scope as either C<L<use locale|perllocale>> or C<L<use bytes|bytes>>. (C<L<use locale ':not_characters'|perllocale/Unicode and UTF-8>> also sets the default to C</u>, overriding any plain C<use locale>.) Unlike the mechanisms mentioned above, these affect operations besides regular expressions pattern matching, and so give more consistent results with other operators, including using C<\U>, C<\l>, I<etc>. in substitution replacements. If none of the above apply, for backwards compatibility reasons, the C</d> modifier is the one in effect by default. As this can lead to unexpected results, it is best to specify which other rule set should be used. =head4 Character set modifier behavior prior to Perl 5.14 Prior to 5.14, there were no explicit modifiers, but C</l> was implied for regexes compiled within the scope of C<use locale>, and C</d> was implied otherwise. However, interpolating a regex into a larger regex would ignore the original compilation in favor of whatever was in effect at the time of the second compilation. There were a number of inconsistencies (bugs) with the C</d> modifier, where Unicode rules would be used when inappropriate, and vice versa. C<\p{}> did not imply Unicode rules, and neither did all occurrences of C<\N{}>, until 5.12. =head2 Regular Expressions =head3 Quantifiers Quantifiers are used when a particular portion of a pattern needs to match a certain number (or numbers) of times. If there isn't a quantifier the number of times to match is exactly one. The following standard quantifiers are recognized: X<metacharacter> X<quantifier> X<*> X<+> X<?> X<{n}> X<{n,}> X<{n,m}> * Match 0 or more times + Match 1 or more times ? Match 1 or 0 times {n} Match exactly n times {n,} Match at least n times {n,m} Match at least n but not more than m times (If a non-escaped curly bracket occurs in a context other than one of the quantifiers listed above, where it does not form part of a backslashed sequence like C<\x{...}>, it is either a fatal syntax error, or treated as a regular character, generally with a deprecation warning raised. To escape it, you can precede it with a backslash (C<"\{">) or enclose it within square brackets (C<"[{]">). This change will allow for future syntax extensions (like making the lower bound of a quantifier optional), and better error checking of quantifiers). The C<"*"> quantifier is equivalent to C<{0,}>, the C<"+"> quantifier to C<{1,}>, and the C<"?"> quantifier to C<{0,1}>. I<n> and I<m> are limited to non-negative integral values less than a preset limit defined when perl is built. This is usually 32766 on the most common platforms. The actual limit can be seen in the error message generated by code such as this: $_ **= $_ , / {$_} / for 2 .. 42; By default, a quantified subpattern is "greedy", that is, it will match as many times as possible (given a particular starting location) while still allowing the rest of the pattern to match. If you want it to match the minimum number of times possible, follow the quantifier with a C<"?">. Note that the meanings don't change, just the "greediness": X<metacharacter> X<greedy> X<greediness> X<?> X<*?> X<+?> X<??> X<{n}?> X<{n,}?> X<{n,m}?> *? Match 0 or more times, not greedily +? Match 1 or more times, not greedily ?? Match 0 or 1 time, not greedily {n}? Match exactly n times, not greedily (redundant) {n,}? Match at least n times, not greedily {n,m}? Match at least n but not more than m times, not greedily Normally when a quantified subpattern does not allow the rest of the overall pattern to match, Perl will backtrack. However, this behaviour is sometimes undesirable. Thus Perl provides the "possessive" quantifier form as well. *+ Match 0 or more times and give nothing back ++ Match 1 or more times and give nothing back ?+ Match 0 or 1 time and give nothing back {n}+ Match exactly n times and give nothing back (redundant) {n,}+ Match at least n times and give nothing back {n,m}+ Match at least n but not more than m times and give nothing back For instance, 'aaaa' =~ /a++a/ will never match, as the C<a++> will gobble up all the C<"a">'s in the string and won't leave any for the remaining part of the pattern. This feature can be extremely useful to give perl hints about where it shouldn't backtrack. For instance, the typical "match a double-quoted string" problem can be most efficiently performed when written as: /"(?:[^"\\]++|\\.)*+"/ as we know that if the final quote does not match, backtracking will not help. See the independent subexpression L</C<< (?>I<pattern>) >>> for more details; possessive quantifiers are just syntactic sugar for that construct. For instance the above example could also be written as follows: /"(?>(?:(?>[^"\\]+)|\\.)*)"/ Note that the possessive quantifier modifier can not be combined with the non-greedy modifier. This is because it would make no sense. Consider the follow equivalency table: Illegal Legal ------------ ------ X??+ X{0} X+?+ X{1} X{min,max}?+ X{min} =head3 Escape sequences Because patterns are processed as double-quoted strings, the following also work: \t tab (HT, TAB) \n newline (LF, NL) \r return (CR) \f form feed (FF) \a alarm (bell) (BEL) \e escape (think troff) (ESC) \cK control char (example: VT) \x{}, \x00 character whose ordinal is the given hexadecimal number \N{name} named Unicode character or character sequence \N{U+263D} Unicode character (example: FIRST QUARTER MOON) \o{}, \000 character whose ordinal is the given octal number \l lowercase next char (think vi) \u uppercase next char (think vi) \L lowercase until \E (think vi) \U uppercase until \E (think vi) \Q quote (disable) pattern metacharacters until \E \E end either case modification or quoted section, think vi Details are in L<perlop/Quote and Quote-like Operators>. =head3 Character Classes and other Special Escapes In addition, Perl defines the following: X<\g> X<\k> X<\K> X<backreference> Sequence Note Description [...] [1] Match a character according to the rules of the bracketed character class defined by the "...". Example: [a-z] matches "a" or "b" or "c" ... or "z" [[:...:]] [2] Match a character according to the rules of the POSIX character class "..." within the outer bracketed character class. Example: [[:upper:]] matches any uppercase character. (?[...]) [8] Extended bracketed character class \w [3] Match a "word" character (alphanumeric plus "_", plus other connector punctuation chars plus Unicode marks) \W [3] Match a non-"word" character \s [3] Match a whitespace character \S [3] Match a non-whitespace character \d [3] Match a decimal digit character \D [3] Match a non-digit character \pP [3] Match P, named property. Use \p{Prop} for longer names \PP [3] Match non-P \X [4] Match Unicode "eXtended grapheme cluster" \1 [5] Backreference to a specific capture group or buffer. '1' may actually be any positive integer. \g1 [5] Backreference to a specific or previous group, \g{-1} [5] The number may be negative indicating a relative previous group and may optionally be wrapped in curly brackets for safer parsing. \g{name} [5] Named backreference \k<name> [5] Named backreference \K [6] Keep the stuff left of the \K, don't include it in $& \N [7] Any character but \n. Not affected by /s modifier \v [3] Vertical whitespace \V [3] Not vertical whitespace \h [3] Horizontal whitespace \H [3] Not horizontal whitespace \R [4] Linebreak =over 4 =item [1] See L<perlrecharclass/Bracketed Character Classes> for details. =item [2] See L<perlrecharclass/POSIX Character Classes> for details. =item [3] See L<perlunicode/Unicode Character Properties> for details =item [4] See L<perlrebackslash/Misc> for details. =item [5] See L</Capture groups> below for details. =item [6] See L</Extended Patterns> below for details. =item [7] Note that C<\N> has two meanings. When of the form C<\N{I<NAME>}>, it matches the character or character sequence whose name is I<NAME>; and similarly when of the form C<\N{U+I<hex>}>, it matches the character whose Unicode code point is I<hex>. Otherwise it matches any character but C<\n>. =item [8] See L<perlrecharclass/Extended Bracketed Character Classes> for details. =back =head3 Assertions Besides L<C<"^"> and C<"$">|/Metacharacters>, Perl defines the following zero-width assertions: X<zero-width assertion> X<assertion> X<regex, zero-width assertion> X<regexp, zero-width assertion> X<regular expression, zero-width assertion> X<\b> X<\B> X<\A> X<\Z> X<\z> X<\G> \b{} Match at Unicode boundary of specified type \B{} Match where corresponding \b{} doesn't match \b Match a \w\W or \W\w boundary \B Match except at a \w\W or \W\w boundary \A Match only at beginning of string \Z Match only at end of string, or before newline at the end \z Match only at end of string \G Match only at pos() (e.g. at the end-of-match position of prior m//g) A Unicode boundary (C<\b{}>), available starting in v5.22, is a spot between two characters, or before the first character in the string, or after the final character in the string where certain criteria defined by Unicode are met. See L<perlrebackslash/\b{}, \b, \B{}, \B> for details. A word boundary (C<\b>) is a spot between two characters that has a C<\w> on one side of it and a C<\W> on the other side of it (in either order), counting the imaginary characters off the beginning and end of the string as matching a C<\W>. (Within character classes C<\b> represents backspace rather than a word boundary, just as it normally does in any double-quoted string.) The C<\A> and C<\Z> are just like C<"^"> and C<"$">, except that they won't match multiple times when the C</m> modifier is used, while C<"^"> and C<"$"> will match at every internal line boundary. To match the actual end of the string and not ignore an optional trailing newline, use C<\z>. X<\b> X<\A> X<\Z> X<\z> X</m> The C<\G> assertion can be used to chain global matches (using C<m//g>), as described in L<perlop/"Regexp Quote-Like Operators">. It is also useful when writing C<lex>-like scanners, when you have several patterns that you want to match against consequent substrings of your string; see the previous reference. The actual location where C<\G> will match can also be influenced by using C<pos()> as an lvalue: see L<perlfunc/pos>. Note that the rule for zero-length matches (see L</"Repeated Patterns Matching a Zero-length Substring">) is modified somewhat, in that contents to the left of C<\G> are not counted when determining the length of the match. Thus the following will not match forever: X<\G> my $string = 'ABC'; pos($string) = 1; while ($string =~ /(.\G)/g) { print $1; } It will print 'A' and then terminate, as it considers the match to be zero-width, and thus will not match at the same position twice in a row. It is worth noting that C<\G> improperly used can result in an infinite loop. Take care when using patterns that include C<\G> in an alternation. Note also that C<s///> will refuse to overwrite part of a substitution that has already been replaced; so for example this will stop after the first iteration, rather than iterating its way backwards through the string: $_ = "123456789"; pos = 6; s/.(?=.\G)/X/g; print; # prints 1234X6789, not XXXXX6789 =head3 Capture groups The grouping construct C<( ... )> creates capture groups (also referred to as capture buffers). To refer to the current contents of a group later on, within the same pattern, use C<\g1> (or C<\g{1}>) for the first, C<\g2> (or C<\g{2}>) for the second, and so on. This is called a I<backreference>. X<regex, capture buffer> X<regexp, capture buffer> X<regex, capture group> X<regexp, capture group> X<regular expression, capture buffer> X<backreference> X<regular expression, capture group> X<backreference> X<\g{1}> X<\g{-1}> X<\g{name}> X<relative backreference> X<named backreference> X<named capture buffer> X<regular expression, named capture buffer> X<named capture group> X<regular expression, named capture group> X<%+> X<$+{name}> X<< \k<name> >> There is no limit to the number of captured substrings that you may use. Groups are numbered with the leftmost open parenthesis being number 1, I<etc>. If a group did not match, the associated backreference won't match either. (This can happen if the group is optional, or in a different branch of an alternation.) You can omit the C<"g">, and write C<"\1">, I<etc>, but there are some issues with this form, described below. You can also refer to capture groups relatively, by using a negative number, so that C<\g-1> and C<\g{-1}> both refer to the immediately preceding capture group, and C<\g-2> and C<\g{-2}> both refer to the group before it. For example: / (Y) # group 1 ( # group 2 (X) # group 3 \g{-1} # backref to group 3 \g{-3} # backref to group 1 ) /x would match the same as C</(Y) ( (X) \g3 \g1 )/x>. This allows you to interpolate regexes into larger regexes and not have to worry about the capture groups being renumbered. You can dispense with numbers altogether and create named capture groups. The notation is C<(?E<lt>I<name>E<gt>...)> to declare and C<\g{I<name>}> to reference. (To be compatible with .Net regular expressions, C<\g{I<name>}> may also be written as C<\k{I<name>}>, C<\kE<lt>I<name>E<gt>> or C<\k'I<name>'>.) I<name> must not begin with a number, nor contain hyphens. When different groups within the same pattern have the same name, any reference to that name assumes the leftmost defined group. Named groups count in absolute and relative numbering, and so can also be referred to by those numbers. (It's possible to do things with named capture groups that would otherwise require C<(??{})>.) Capture group contents are dynamically scoped and available to you outside the pattern until the end of the enclosing block or until the next successful match, whichever comes first. (See L<perlsyn/"Compound Statements">.) You can refer to them by absolute number (using C<"$1"> instead of C<"\g1">, I<etc>); or by name via the C<%+> hash, using C<"$+{I<name>}">. Braces are required in referring to named capture groups, but are optional for absolute or relative numbered ones. Braces are safer when creating a regex by concatenating smaller strings. For example if you have C<qr/$a$b/>, and C<$a> contained C<"\g1">, and C<$b> contained C<"37">, you would get C</\g137/> which is probably not what you intended. The C<\g> and C<\k> notations were introduced in Perl 5.10.0. Prior to that there were no named nor relative numbered capture groups. Absolute numbered groups were referred to using C<\1>, C<\2>, I<etc>., and this notation is still accepted (and likely always will be). But it leads to some ambiguities if there are more than 9 capture groups, as C<\10> could mean either the tenth capture group, or the character whose ordinal in octal is 010 (a backspace in ASCII). Perl resolves this ambiguity by interpreting C<\10> as a backreference only if at least 10 left parentheses have opened before it. Likewise C<\11> is a backreference only if at least 11 left parentheses have opened before it. And so on. C<\1> through C<\9> are always interpreted as backreferences. There are several examples below that illustrate these perils. You can avoid the ambiguity by always using C<\g{}> or C<\g> if you mean capturing groups; and for octal constants always using C<\o{}>, or for C<\077> and below, using 3 digits padded with leading zeros, since a leading zero implies an octal constant. The C<\I<digit>> notation also works in certain circumstances outside the pattern. See L</Warning on \1 Instead of $1> below for details. Examples: s/^([^ ]*) *([^ ]*)/$2 $1/; # swap first two words /(.)\g1/ # find first doubled char and print "'$1' is the first doubled character\n"; /(?<char>.)\k<char>/ # ... a different way and print "'$+{char}' is the first doubled character\n"; /(?'char'.)\g1/ # ... mix and match and print "'$1' is the first doubled character\n"; if (/Time: (..):(..):(..)/) { # parse out values $hours = $1; $minutes = $2; $seconds = $3; } /(.)(.)(.)(.)(.)(.)(.)(.)(.)\g10/ # \g10 is a backreference /(.)(.)(.)(.)(.)(.)(.)(.)(.)\10/ # \10 is octal /((.)(.)(.)(.)(.)(.)(.)(.)(.))\10/ # \10 is a backreference /((.)(.)(.)(.)(.)(.)(.)(.)(.))\010/ # \010 is octal $a = '(.)\1'; # Creates problems when concatenated. $b = '(.)\g{1}'; # Avoids the problems. "aa" =~ /${a}/; # True "aa" =~ /${b}/; # True "aa0" =~ /${a}0/; # False! "aa0" =~ /${b}0/; # True "aa\x08" =~ /${a}0/; # True! "aa\x08" =~ /${b}0/; # False Several special variables also refer back to portions of the previous match. C<$+> returns whatever the last bracket match matched. C<$&> returns the entire matched string. (At one point C<$0> did also, but now it returns the name of the program.) C<$`> returns everything before the matched string. C<$'> returns everything after the matched string. And C<$^N> contains whatever was matched by the most-recently closed group (submatch). C<$^N> can be used in extended patterns (see below), for example to assign a submatch to a variable. X<$+> X<$^N> X<$&> X<$`> X<$'> These special variables, like the C<%+> hash and the numbered match variables (C<$1>, C<$2>, C<$3>, I<etc>.) are dynamically scoped until the end of the enclosing block or until the next successful match, whichever comes first. (See L<perlsyn/"Compound Statements">.) X<$+> X<$^N> X<$&> X<$`> X<$'> X<$1> X<$2> X<$3> X<$4> X<$5> X<$6> X<$7> X<$8> X<$9> B<NOTE>: Failed matches in Perl do not reset the match variables, which makes it easier to write code that tests for a series of more specific cases and remembers the best match. B<WARNING>: If your code is to run on Perl 5.16 or earlier, beware that once Perl sees that you need one of C<$&>, C<$`>, or C<$'> anywhere in the program, it has to provide them for every pattern match. This may substantially slow your program. Perl uses the same mechanism to produce C<$1>, C<$2>, I<etc>, so you also pay a price for each pattern that contains capturing parentheses. (To avoid this cost while retaining the grouping behaviour, use the extended regular expression C<(?: ... )> instead.) But if you never use C<$&>, C<$`> or C<$'>, then patterns I<without> capturing parentheses will not be penalized. So avoid C<$&>, C<$'>, and C<$`> if you can, but if you can't (and some algorithms really appreciate them), once you've used them once, use them at will, because you've already paid the price. X<$&> X<$`> X<$'> Perl 5.16 introduced a slightly more efficient mechanism that notes separately whether each of C<$`>, C<$&>, and C<$'> have been seen, and thus may only need to copy part of the string. Perl 5.20 introduced a much more efficient copy-on-write mechanism which eliminates any slowdown. As another workaround for this problem, Perl 5.10.0 introduced C<${^PREMATCH}>, C<${^MATCH}> and C<${^POSTMATCH}>, which are equivalent to C<$`>, C<$&> and C<$'>, B<except> that they are only guaranteed to be defined after a successful match that was executed with the C</p> (preserve) modifier. The use of these variables incurs no global performance penalty, unlike their punctuation character equivalents, however at the trade-off that you have to tell perl when you want to use them. As of Perl 5.20, these three variables are equivalent to C<$`>, C<$&> and C<$'>, and C</p> is ignored. X</p> X<p modifier> =head2 Quoting metacharacters Backslashed metacharacters in Perl are alphanumeric, such as C<\b>, C<\w>, C<\n>. Unlike some other regular expression languages, there are no backslashed symbols that aren't alphanumeric. So anything that looks like C<\\>, C<\(>, C<\)>, C<\[>, C<\]>, C<\{>, or C<\}> is always interpreted as a literal character, not a metacharacter. This was once used in a common idiom to disable or quote the special meanings of regular expression metacharacters in a string that you want to use for a pattern. Simply quote all non-"word" characters: $pattern =~ s/(\W)/\\$1/g; (If C<use locale> is set, then this depends on the current locale.) Today it is more common to use the C<L<quotemeta()|perlfunc/quotemeta>> function or the C<\Q> metaquoting escape sequence to disable all metacharacters' special meanings like this: /$unquoted\Q$quoted\E$unquoted/ Beware that if you put literal backslashes (those not inside interpolated variables) between C<\Q> and C<\E>, double-quotish backslash interpolation may lead to confusing results. If you I<need> to use literal backslashes within C<\Q...\E>, consult L<perlop/"Gory details of parsing quoted constructs">. C<quotemeta()> and C<\Q> are fully described in L<perlfunc/quotemeta>. =head2 Extended Patterns Perl also defines a consistent extension syntax for features not found in standard tools like B<awk> and B<lex>. The syntax for most of these is a pair of parentheses with a question mark as the first thing within the parentheses. The character after the question mark indicates the extension. A question mark was chosen for this and for the minimal-matching construct because 1) question marks are rare in older regular expressions, and 2) whenever you see one, you should stop and "question" exactly what is going on. That's psychology.... =over 4 =item C<(?#I<text>)> X<(?#)> A comment. The I<text> is ignored. Note that Perl closes the comment as soon as it sees a C<")">, so there is no way to put a literal C<")"> in the comment. The pattern's closing delimiter must be escaped by a backslash if it appears in the comment. See L</E<sol>x> for another way to have comments in patterns. Note that a comment can go just about anywhere, except in the middle of an escape sequence. Examples: qr/foo(?#comment)bar/' # Matches 'foobar' # The pattern below matches 'abcd', 'abccd', or 'abcccd' qr/abc(?#comment between literal and its quantifier){1,3}d/ # The pattern below generates a syntax error, because the '\p' must # be followed immediately by a '{'. qr/\p(?#comment between \p and its property name){Any}/ # The pattern below generates a syntax error, because the initial # '\(' is a literal opening parenthesis, and so there is nothing # for the closing ')' to match qr/\(?#the backslash means this isn't a comment)p{Any}/ # Comments can be used to fold long patterns into multiple lines qr/First part of a long regex(?# )remaining part/ =item C<(?adlupimnsx-imnsx)> =item C<(?^alupimnsx)> X<(?)> X<(?^)> Zero or more embedded pattern-match modifiers, to be turned on (or turned off if preceded by C<"-">) for the remainder of the pattern or the remainder of the enclosing pattern group (if any). This is particularly useful for dynamically-generated patterns, such as those read in from a configuration file, taken from an argument, or specified in a table somewhere. Consider the case where some patterns want to be case-sensitive and some do not: The case-insensitive ones merely need to include C<(?i)> at the front of the pattern. For example: $pattern = "foobar"; if ( /$pattern/i ) { } # more flexible: $pattern = "(?i)foobar"; if ( /$pattern/ ) { } These modifiers are restored at the end of the enclosing group. For example, ( (?i) blah ) \s+ \g1 will match C<blah> in any case, some spaces, and an exact (I<including the case>!) repetition of the previous word, assuming the C</x> modifier, and no C</i> modifier outside this group. These modifiers do not carry over into named subpatterns called in the enclosing group. In other words, a pattern such as C<((?i)(?&I<NAME>))> does not change the case-sensitivity of the I<NAME> pattern. A modifier is overridden by later occurrences of this construct in the same scope containing the same modifier, so that /((?im)foo(?-m)bar)/ matches all of C<foobar> case insensitively, but uses C</m> rules for only the C<foo> portion. The C<"a"> flag overrides C<aa> as well; likewise C<aa> overrides C<"a">. The same goes for C<"x"> and C<xx>. Hence, in /(?-x)foo/xx both C</x> and C</xx> are turned off during matching C<foo>. And in /(?x)foo/x C</x> but NOT C</xx> is turned on for matching C<foo>. (One might mistakenly think that since the inner C<(?x)> is already in the scope of C</x>, that the result would effectively be the sum of them, yielding C</xx>. It doesn't work that way.) Similarly, doing something like C<(?xx-x)foo> turns off all C<"x"> behavior for matching C<foo>, it is not that you subtract 1 C<"x"> from 2 to get 1 C<"x"> remaining. Any of these modifiers can be set to apply globally to all regular expressions compiled within the scope of a C<use re>. See L<re/"'/flags' mode">. Starting in Perl 5.14, a C<"^"> (caret or circumflex accent) immediately after the C<"?"> is a shorthand equivalent to C<d-imnsx>. Flags (except C<"d">) may follow the caret to override it. But a minus sign is not legal with it. Note that the C<"a">, C<"d">, C<"l">, C<"p">, and C<"u"> modifiers are special in that they can only be enabled, not disabled, and the C<"a">, C<"d">, C<"l">, and C<"u"> modifiers are mutually exclusive: specifying one de-specifies the others, and a maximum of one (or two C<"a">'s) may appear in the construct. Thus, for example, C<(?-p)> will warn when compiled under C<use warnings>; C<(?-d:...)> and C<(?dl:...)> are fatal errors. Note also that the C<"p"> modifier is special in that its presence anywhere in a pattern has a global effect. Having zero modifiers makes this a no-op (so why did you specify it, unless it's generated code), and starting in v5.30, warns under L<C<use re 'strict'>|re/'strict' mode>. =item C<(?:I<pattern>)> X<(?:)> =item C<(?adluimnsx-imnsx:I<pattern>)> =item C<(?^aluimnsx:I<pattern>)> X<(?^:)> This is for clustering, not capturing; it groups subexpressions like C<"()">, but doesn't make backreferences as C<"()"> does. So @fields = split(/\b(?:a|b|c)\b/) matches the same field delimiters as @fields = split(/\b(a|b|c)\b/) but doesn't spit out the delimiters themselves as extra fields (even though that's the behaviour of L<perlfunc/split> when its pattern contains capturing groups). It's also cheaper not to capture characters if you don't need to. Any letters between C<"?"> and C<":"> act as flags modifiers as with C<(?adluimnsx-imnsx)>. For example, /(?s-i:more.*than).*million/i is equivalent to the more verbose /(?:(?s-i)more.*than).*million/i Note that any C<()> constructs enclosed within this one will still capture unless the C</n> modifier is in effect. Like the L</(?adlupimnsx-imnsx)> construct, C<aa> and C<"a"> override each other, as do C<xx> and C<"x">. They are not additive. So, doing something like C<(?xx-x:foo)> turns off all C<"x"> behavior for matching C<foo>. Starting in Perl 5.14, a C<"^"> (caret or circumflex accent) immediately after the C<"?"> is a shorthand equivalent to C<d-imnsx>. Any positive flags (except C<"d">) may follow the caret, so (?^x:foo) is equivalent to (?x-imns:foo) The caret tells Perl that this cluster doesn't inherit the flags of any surrounding pattern, but uses the system defaults (C<d-imnsx>), modified by any flags specified. The caret allows for simpler stringification of compiled regular expressions. These look like (?^:pattern) with any non-default flags appearing between the caret and the colon. A test that looks at such stringification thus doesn't need to have the system default flags hard-coded in it, just the caret. If new flags are added to Perl, the meaning of the caret's expansion will change to include the default for those flags, so the test will still work, unchanged. Specifying a negative flag after the caret is an error, as the flag is redundant. Mnemonic for C<(?^...)>: A fresh beginning since the usual use of a caret is to match at the beginning. =item C<(?|I<pattern>)> X<(?|)> X<Branch reset> This is the "branch reset" pattern, which has the special property that the capture groups are numbered from the same starting point in each alternation branch. It is available starting from perl 5.10.0. Capture groups are numbered from left to right, but inside this construct the numbering is restarted for each branch. The numbering within each branch will be as normal, and any groups following this construct will be numbered as though the construct contained only one branch, that being the one with the most capture groups in it. This construct is useful when you want to capture one of a number of alternative matches. Consider the following pattern. The numbers underneath show in which group the captured content will be stored. # before ---------------branch-reset----------- after / ( a ) (?| x ( y ) z | (p (q) r) | (t) u (v) ) ( z ) /x # 1 2 2 3 2 3 4 Be careful when using the branch reset pattern in combination with named captures. Named captures are implemented as being aliases to numbered groups holding the captures, and that interferes with the implementation of the branch reset pattern. If you are using named captures in a branch reset pattern, it's best to use the same names, in the same order, in each of the alternations: /(?| (?<a> x ) (?<b> y ) | (?<a> z ) (?<b> w )) /x Not doing so may lead to surprises: "12" =~ /(?| (?<a> \d+ ) | (?<b> \D+))/x; say $+{a}; # Prints '12' say $+{b}; # *Also* prints '12'. The problem here is that both the group named C<< a >> and the group named C<< b >> are aliases for the group belonging to C<< $1 >>. =item Lookaround Assertions X<look-around assertion> X<lookaround assertion> X<look-around> X<lookaround> Lookaround assertions are zero-width patterns which match a specific pattern without including it in C<$&>. Positive assertions match when their subpattern matches, negative assertions match when their subpattern fails. Lookbehind matches text up to the current match position, lookahead matches text following the current match position. =over 4 =item C<(?=I<pattern>)> =item C<(*pla:I<pattern>)> =item C<(*positive_lookahead:I<pattern>)> X<(?=)> X<(*pla> X<(*positive_lookahead> X<look-ahead, positive> X<lookahead, positive> A zero-width positive lookahead assertion. For example, C</\w+(?=\t)/> matches a word followed by a tab, without including the tab in C<$&>. =item C<(?!I<pattern>)> =item C<(*nla:I<pattern>)> =item C<(*negative_lookahead:I<pattern>)> X<(?!)> X<(*nla> X<(*negative_lookahead> X<look-ahead, negative> X<lookahead, negative> A zero-width negative lookahead assertion. For example C</foo(?!bar)/> matches any occurrence of "foo" that isn't followed by "bar". Note however that lookahead and lookbehind are NOT the same thing. You cannot use this for lookbehind. If you are looking for a "bar" that isn't preceded by a "foo", C</(?!foo)bar/> will not do what you want. That's because the C<(?!foo)> is just saying that the next thing cannot be "foo"--and it's not, it's a "bar", so "foobar" will match. Use lookbehind instead (see below). =item C<(?<=I<pattern>)> =item C<\K> =item C<(*plb:I<pattern>)> =item C<(*positive_lookbehind:I<pattern>)> X<(?<=)> X<(*plb> X<(*positive_lookbehind> X<look-behind, positive> X<lookbehind, positive> X<\K> A zero-width positive lookbehind assertion. For example, C</(?<=\t)\w+/> matches a word that follows a tab, without including the tab in C<$&>. Prior to Perl 5.30, it worked only for fixed-width lookbehind, but starting in that release, it can handle variable lengths from 1 to 255 characters as an experimental feature. The feature is enabled automatically if you use a variable length lookbehind assertion, but will raise a warning at pattern compilation time, unless turned off, in the C<experimental::vlb> category. This is to warn you that the exact behavior is subject to change should feedback from actual use in the field indicate to do so; or even complete removal if the problems found are not practically surmountable. You can achieve close to pre-5.30 behavior by fatalizing warnings in this category. There is a special form of this construct, called C<\K> (available since Perl 5.10.0), which causes the regex engine to "keep" everything it had matched prior to the C<\K> and not include it in C<$&>. This effectively provides non-experimental variable-length lookbehind of any length. And, there is a technique that can be used to handle variable length lookbehinds on earlier releases, and longer than 255 characters. It is described in L<http://www.drregex.com/2019/02/variable-length-lookbehinds-actually.html>. Note that under C</i>, a few single characters match two or three other characters. This makes them variable length, and the 255 length applies to the maximum number of characters in the match. For example C<qr/\N{LATIN SMALL LETTER SHARP S}/i> matches the sequence C<"ss">. Your lookbehind assertion could contain 127 Sharp S characters under C</i>, but adding a 128th would generate a compilation error, as that could match 256 C<"s"> characters in a row. The use of C<\K> inside of another lookaround assertion is allowed, but the behaviour is currently not well defined. For various reasons C<\K> may be significantly more efficient than the equivalent C<< (?<=...) >> construct, and it is especially useful in situations where you want to efficiently remove something following something else in a string. For instance s/(foo)bar/$1/g; can be rewritten as the much more efficient s/foo\Kbar//g; Use of the non-greedy modifier C<"?"> may not give you the expected results if it is within a capturing group within the construct. =item C<(?<!I<pattern>)> =item C<(*nlb:I<pattern>)> =item C<(*negative_lookbehind:I<pattern>)> X<(?<!)> X<(*nlb> X<(*negative_lookbehind> X<look-behind, negative> X<lookbehind, negative> A zero-width negative lookbehind assertion. For example C</(?<!bar)foo/> matches any occurrence of "foo" that does not follow "bar". Prior to Perl 5.30, it worked only for fixed-width lookbehind, but starting in that release, it can handle variable lengths from 1 to 255 characters as an experimental feature. The feature is enabled automatically if you use a variable length lookbehind assertion, but will raise a warning at pattern compilation time, unless turned off, in the C<experimental::vlb> category. This is to warn you that the exact behavior is subject to change should feedback from actual use in the field indicate to do so; or even complete removal if the problems found are not practically surmountable. You can achieve close to pre-5.30 behavior by fatalizing warnings in this category. There is a technique that can be used to handle variable length lookbehinds on earlier releases, and longer than 255 characters. It is described in L<http://www.drregex.com/2019/02/variable-length-lookbehinds-actually.html>. Note that under C</i>, a few single characters match two or three other characters. This makes them variable length, and the 255 length applies to the maximum number of characters in the match. For example C<qr/\N{LATIN SMALL LETTER SHARP S}/i> matches the sequence C<"ss">. Your lookbehind assertion could contain 127 Sharp S characters under C</i>, but adding a 128th would generate a compilation error, as that could match 256 C<"s"> characters in a row. Use of the non-greedy modifier C<"?"> may not give you the expected results if it is within a capturing group within the construct. =back =item C<< (?<I<NAME>>I<pattern>) >> =item C<(?'I<NAME>'I<pattern>)> X<< (?<NAME>) >> X<(?'NAME')> X<named capture> X<capture> A named capture group. Identical in every respect to normal capturing parentheses C<()> but for the additional fact that the group can be referred to by name in various regular expression constructs (like C<\g{I<NAME>}>) and can be accessed by name after a successful match via C<%+> or C<%->. See L<perlvar> for more details on the C<%+> and C<%-> hashes. If multiple distinct capture groups have the same name, then C<$+{I<NAME>}> will refer to the leftmost defined group in the match. The forms C<(?'I<NAME>'I<pattern>)> and C<< (?<I<NAME>>I<pattern>) >> are equivalent. B<NOTE:> While the notation of this construct is the same as the similar function in .NET regexes, the behavior is not. In Perl the groups are numbered sequentially regardless of being named or not. Thus in the pattern /(x)(?<foo>y)(z)/ C<$+{foo}> will be the same as C<$2>, and C<$3> will contain 'z' instead of the opposite which is what a .NET regex hacker might expect. Currently I<NAME> is restricted to simple identifiers only. In other words, it must match C</^[_A-Za-z][_A-Za-z0-9]*\z/> or its Unicode extension (see L<utf8>), though it isn't extended by the locale (see L<perllocale>). B<NOTE:> In order to make things easier for programmers with experience with the Python or PCRE regex engines, the pattern C<< (?PE<lt>I<NAME>E<gt>I<pattern>) >> may be used instead of C<< (?<I<NAME>>I<pattern>) >>; however this form does not support the use of single quotes as a delimiter for the name. =item C<< \k<I<NAME>> >> =item C<< \k'I<NAME>' >> Named backreference. Similar to numeric backreferences, except that the group is designated by name and not number. If multiple groups have the same name then it refers to the leftmost defined group in the current match. It is an error to refer to a name not defined by a C<< (?<I<NAME>>) >> earlier in the pattern. Both forms are equivalent. B<NOTE:> In order to make things easier for programmers with experience with the Python or PCRE regex engines, the pattern C<< (?P=I<NAME>) >> may be used instead of C<< \k<I<NAME>> >>. =item C<(?{ I<code> })> X<(?{})> X<regex, code in> X<regexp, code in> X<regular expression, code in> B<WARNING>: Using this feature safely requires that you understand its limitations. Code executed that has side effects may not perform identically from version to version due to the effect of future optimisations in the regex engine. For more information on this, see L</Embedded Code Execution Frequency>. This zero-width assertion executes any embedded Perl code. It always succeeds, and its return value is set as C<$^R>. In literal patterns, the code is parsed at the same time as the surrounding code. While within the pattern, control is passed temporarily back to the perl parser, until the logically-balancing closing brace is encountered. This is similar to the way that an array index expression in a literal string is handled, for example "abc$array[ 1 + f('[') + g()]def" In particular, braces do not need to be balanced: s/abc(?{ f('{'); })/def/ Even in a pattern that is interpolated and compiled at run-time, literal code blocks will be compiled once, at perl compile time; the following prints "ABCD": print "D"; my $qr = qr/(?{ BEGIN { print "A" } })/; my $foo = "foo"; /$foo$qr(?{ BEGIN { print "B" } })/; BEGIN { print "C" } In patterns where the text of the code is derived from run-time information rather than appearing literally in a source code /pattern/, the code is compiled at the same time that the pattern is compiled, and for reasons of security, C<use re 'eval'> must be in scope. This is to stop user-supplied patterns containing code snippets from being executable. In situations where you need to enable this with C<use re 'eval'>, you should also have taint checking enabled. Better yet, use the carefully constrained evaluation within a Safe compartment. See L<perlsec> for details about both these mechanisms. From the viewpoint of parsing, lexical variable scope and closures, /AAA(?{ BBB })CCC/ behaves approximately like /AAA/ && do { BBB } && /CCC/ Similarly, qr/AAA(?{ BBB })CCC/ behaves approximately like sub { /AAA/ && do { BBB } && /CCC/ } In particular: { my $i = 1; $r = qr/(?{ print $i })/ } my $i = 2; /$r/; # prints "1" Inside a C<(?{...})> block, C<$_> refers to the string the regular expression is matching against. You can also use C<pos()> to know what is the current position of matching within this string. The code block introduces a new scope from the perspective of lexical variable declarations, but B<not> from the perspective of C<local> and similar localizing behaviours. So later code blocks within the same pattern will still see the values which were localized in earlier blocks. These accumulated localizations are undone either at the end of a successful match, or if the assertion is backtracked (compare L</"Backtracking">). For example, $_ = 'a' x 8; m< (?{ $cnt = 0 }) # Initialize $cnt. ( a (?{ local $cnt = $cnt + 1; # Update $cnt, # backtracking-safe. }) )* aaaa (?{ $res = $cnt }) # On success copy to # non-localized location. >x; will initially increment C<$cnt> up to 8; then during backtracking, its value will be unwound back to 4, which is the value assigned to C<$res>. At the end of the regex execution, C<$cnt> will be wound back to its initial value of 0. This assertion may be used as the condition in a (?(condition)yes-pattern|no-pattern) switch. If I<not> used in this way, the result of evaluation of I<code> is put into the special variable C<$^R>. This happens immediately, so C<$^R> can be used from other C<(?{ I<code> })> assertions inside the same regular expression. The assignment to C<$^R> above is properly localized, so the old value of C<$^R> is restored if the assertion is backtracked; compare L</"Backtracking">. Note that the special variable C<$^N> is particularly useful with code blocks to capture the results of submatches in variables without having to keep track of the number of nested parentheses. For example: $_ = "The brown fox jumps over the lazy dog"; /the (\S+)(?{ $color = $^N }) (\S+)(?{ $animal = $^N })/i; print "color = $color, animal = $animal\n"; =item C<(??{ I<code> })> X<(??{})> X<regex, postponed> X<regexp, postponed> X<regular expression, postponed> B<WARNING>: Using this feature safely requires that you understand its limitations. Code executed that has side effects may not perform identically from version to version due to the effect of future optimisations in the regex engine. For more information on this, see L</Embedded Code Execution Frequency>. This is a "postponed" regular subexpression. It behaves in I<exactly> the same way as a C<(?{ I<code> })> code block as described above, except that its return value, rather than being assigned to C<$^R>, is treated as a pattern, compiled if it's a string (or used as-is if its a qr// object), then matched as if it were inserted instead of this construct. During the matching of this sub-pattern, it has its own set of captures which are valid during the sub-match, but are discarded once control returns to the main pattern. For example, the following matches, with the inner pattern capturing "B" and matching "BB", while the outer pattern captures "A"; my $inner = '(.)\1'; "ABBA" =~ /^(.)(??{ $inner })\1/; print $1; # prints "A"; Note that this means that there is no way for the inner pattern to refer to a capture group defined outside. (The code block itself can use C<$1>, I<etc>., to refer to the enclosing pattern's capture groups.) Thus, although ('a' x 100)=~/(??{'(.)' x 100})/ I<will> match, it will I<not> set C<$1> on exit. The following pattern matches a parenthesized group: $re = qr{ \( (?: (?> [^()]+ ) # Non-parens without backtracking | (??{ $re }) # Group with matching parens )* \) }x; See also L<C<(?I<PARNO>)>|/(?I<PARNO>) (?-I<PARNO>) (?+I<PARNO>) (?R) (?0)> for a different, more efficient way to accomplish the same task. Executing a postponed regular expression too many times without consuming any input string will also result in a fatal error. The depth at which that happens is compiled into perl, so it can be changed with a custom build. =item C<(?I<PARNO>)> C<(?-I<PARNO>)> C<(?+I<PARNO>)> C<(?R)> C<(?0)> X<(?PARNO)> X<(?1)> X<(?R)> X<(?0)> X<(?-1)> X<(?+1)> X<(?-PARNO)> X<(?+PARNO)> X<regex, recursive> X<regexp, recursive> X<regular expression, recursive> X<regex, relative recursion> X<GOSUB> X<GOSTART> Recursive subpattern. Treat the contents of a given capture buffer in the current pattern as an independent subpattern and attempt to match it at the current position in the string. Information about capture state from the caller for things like backreferences is available to the subpattern, but capture buffers set by the subpattern are not visible to the caller. Similar to C<(??{ I<code> })> except that it does not involve executing any code or potentially compiling a returned pattern string; instead it treats the part of the current pattern contained within a specified capture group as an independent pattern that must match at the current position. Also different is the treatment of capture buffers, unlike C<(??{ I<code> })> recursive patterns have access to their caller's match state, so one can use backreferences safely. I<PARNO> is a sequence of digits (not starting with 0) whose value reflects the paren-number of the capture group to recurse to. C<(?R)> recurses to the beginning of the whole pattern. C<(?0)> is an alternate syntax for C<(?R)>. If I<PARNO> is preceded by a plus or minus sign then it is assumed to be relative, with negative numbers indicating preceding capture groups and positive ones following. Thus C<(?-1)> refers to the most recently declared group, and C<(?+1)> indicates the next group to be declared. Note that the counting for relative recursion differs from that of relative backreferences, in that with recursion unclosed groups B<are> included. The following pattern matches a function C<foo()> which may contain balanced parentheses as the argument. $re = qr{ ( # paren group 1 (full function) foo ( # paren group 2 (parens) \( ( # paren group 3 (contents of parens) (?: (?> [^()]+ ) # Non-parens without backtracking | (?2) # Recurse to start of paren group 2 )* ) \) ) ) }x; If the pattern was used as follows 'foo(bar(baz)+baz(bop))'=~/$re/ and print "\$1 = $1\n", "\$2 = $2\n", "\$3 = $3\n"; the output produced should be the following: $1 = foo(bar(baz)+baz(bop)) $2 = (bar(baz)+baz(bop)) $3 = bar(baz)+baz(bop) If there is no corresponding capture group defined, then it is a fatal error. Recursing deeply without consuming any input string will also result in a fatal error. The depth at which that happens is compiled into perl, so it can be changed with a custom build. The following shows how using negative indexing can make it easier to embed recursive patterns inside of a C<qr//> construct for later use: my $parens = qr/(\((?:[^()]++|(?-1))*+\))/; if (/foo $parens \s+ \+ \s+ bar $parens/x) { # do something here... } B<Note> that this pattern does not behave the same way as the equivalent PCRE or Python construct of the same form. In Perl you can backtrack into a recursed group, in PCRE and Python the recursed into group is treated as atomic. Also, modifiers are resolved at compile time, so constructs like C<(?i:(?1))> or C<(?:(?i)(?1))> do not affect how the sub-pattern will be processed. =item C<(?&I<NAME>)> X<(?&NAME)> Recurse to a named subpattern. Identical to C<(?I<PARNO>)> except that the parenthesis to recurse to is determined by name. If multiple parentheses have the same name, then it recurses to the leftmost. It is an error to refer to a name that is not declared somewhere in the pattern. B<NOTE:> In order to make things easier for programmers with experience with the Python or PCRE regex engines the pattern C<< (?P>I<NAME>) >> may be used instead of C<< (?&I<NAME>) >>. =item C<(?(I<condition>)I<yes-pattern>|I<no-pattern>)> X<(?()> =item C<(?(I<condition>)I<yes-pattern>)> Conditional expression. Matches I<yes-pattern> if I<condition> yields a true value, matches I<no-pattern> otherwise. A missing pattern always matches. C<(I<condition>)> should be one of: =over 4 =item an integer in parentheses (which is valid if the corresponding pair of parentheses matched); =item a lookahead/lookbehind/evaluate zero-width assertion; =item a name in angle brackets or single quotes (which is valid if a group with the given name matched); =item the special symbol C<(R)> (true when evaluated inside of recursion or eval). Additionally the C<"R"> may be followed by a number, (which will be true when evaluated when recursing inside of the appropriate group), or by C<&I<NAME>>, in which case it will be true only when evaluated during recursion in the named group. =back Here's a summary of the possible predicates: =over 4 =item C<(1)> C<(2)> ... Checks if the numbered capturing group has matched something. Full syntax: C<< (?(1)then|else) >> =item C<(E<lt>I<NAME>E<gt>)> C<('I<NAME>')> Checks if a group with the given name has matched something. Full syntax: C<< (?(<name>)then|else) >> =item C<(?=...)> C<(?!...)> C<(?<=...)> C<(?<!...)> Checks whether the pattern matches (or does not match, for the C<"!"> variants). Full syntax: C<< (?(?=I<lookahead>)I<then>|I<else>) >> =item C<(?{ I<CODE> })> Treats the return value of the code block as the condition. Full syntax: C<< (?(?{ I<code> })I<then>|I<else>) >> =item C<(R)> Checks if the expression has been evaluated inside of recursion. Full syntax: C<< (?(R)I<then>|I<else>) >> =item C<(R1)> C<(R2)> ... Checks if the expression has been evaluated while executing directly inside of the n-th capture group. This check is the regex equivalent of if ((caller(0))[3] eq 'subname') { ... } In other words, it does not check the full recursion stack. Full syntax: C<< (?(R1)I<then>|I<else>) >> =item C<(R&I<NAME>)> Similar to C<(R1)>, this predicate checks to see if we're executing directly inside of the leftmost group with a given name (this is the same logic used by C<(?&I<NAME>)> to disambiguate). It does not check the full stack, but only the name of the innermost active recursion. Full syntax: C<< (?(R&I<name>)I<then>|I<else>) >> =item C<(DEFINE)> In this case, the yes-pattern is never directly executed, and no no-pattern is allowed. Similar in spirit to C<(?{0})> but more efficient. See below for details. Full syntax: C<< (?(DEFINE)I<definitions>...) >> =back For example: m{ ( \( )? [^()]+ (?(1) \) ) }x matches a chunk of non-parentheses, possibly included in parentheses themselves. A special form is the C<(DEFINE)> predicate, which never executes its yes-pattern directly, and does not allow a no-pattern. This allows one to define subpatterns which will be executed only by the recursion mechanism. This way, you can define a set of regular expression rules that can be bundled into any pattern you choose. It is recommended that for this usage you put the DEFINE block at the end of the pattern, and that you name any subpatterns defined within it. Also, it's worth noting that patterns defined this way probably will not be as efficient, as the optimizer is not very clever about handling them. An example of how this might be used is as follows: /(?<NAME>(?&NAME_PAT))(?<ADDR>(?&ADDRESS_PAT)) (?(DEFINE) (?<NAME_PAT>....) (?<ADDRESS_PAT>....) )/x Note that capture groups matched inside of recursion are not accessible after the recursion returns, so the extra layer of capturing groups is necessary. Thus C<$+{NAME_PAT}> would not be defined even though C<$+{NAME}> would be. Finally, keep in mind that subpatterns created inside a DEFINE block count towards the absolute and relative number of captures, so this: my @captures = "a" =~ /(.) # First capture (?(DEFINE) (?<EXAMPLE> 1 ) # Second capture )/x; say scalar @captures; Will output 2, not 1. This is particularly important if you intend to compile the definitions with the C<qr//> operator, and later interpolate them in another pattern. =item C<< (?>I<pattern>) >> =item C<< (*atomic:I<pattern>) >> X<(?E<gt>pattern)> X<(*atomic> X<backtrack> X<backtracking> X<atomic> X<possessive> An "independent" subexpression, one which matches the substring that a standalone I<pattern> would match if anchored at the given position, and it matches I<nothing other than this substring>. This construct is useful for optimizations of what would otherwise be "eternal" matches, because it will not backtrack (see L</"Backtracking">). It may also be useful in places where the "grab all you can, and do not give anything back" semantic is desirable. For example: C<< ^(?>a*)ab >> will never match, since C<< (?>a*) >> (anchored at the beginning of string, as above) will match I<all> characters C<"a"> at the beginning of string, leaving no C<"a"> for C<ab> to match. In contrast, C<a*ab> will match the same as C<a+b>, since the match of the subgroup C<a*> is influenced by the following group C<ab> (see L</"Backtracking">). In particular, C<a*> inside C<a*ab> will match fewer characters than a standalone C<a*>, since this makes the tail match. C<< (?>I<pattern>) >> does not disable backtracking altogether once it has matched. It is still possible to backtrack past the construct, but not into it. So C<< ((?>a*)|(?>b*))ar >> will still match "bar". An effect similar to C<< (?>I<pattern>) >> may be achieved by writing C<(?=(I<pattern>))\g{-1}>. This matches the same substring as a standalone C<a+>, and the following C<\g{-1}> eats the matched string; it therefore makes a zero-length assertion into an analogue of C<< (?>...) >>. (The difference between these two constructs is that the second one uses a capturing group, thus shifting ordinals of backreferences in the rest of a regular expression.) Consider this pattern: m{ \( ( [^()]+ # x+ | \( [^()]* \) )+ \) }x That will efficiently match a nonempty group with matching parentheses two levels deep or less. However, if there is no such group, it will take virtually forever on a long string. That's because there are so many different ways to split a long string into several substrings. This is what C<(.+)+> is doing, and C<(.+)+> is similar to a subpattern of the above pattern. Consider how the pattern above detects no-match on C<((()aaaaaaaaaaaaaaaaaa> in several seconds, but that each extra letter doubles this time. This exponential performance will make it appear that your program has hung. However, a tiny change to this pattern m{ \( ( (?> [^()]+ ) # change x+ above to (?> x+ ) | \( [^()]* \) )+ \) }x which uses C<< (?>...) >> matches exactly when the one above does (verifying this yourself would be a productive exercise), but finishes in a fourth the time when used on a similar string with 1000000 C<"a">s. Be aware, however, that, when this construct is followed by a quantifier, it currently triggers a warning message under the C<use warnings> pragma or B<-w> switch saying it C<"matches null string many times in regex">. On simple groups, such as the pattern C<< (?> [^()]+ ) >>, a comparable effect may be achieved by negative lookahead, as in C<[^()]+ (?! [^()] )>. This was only 4 times slower on a string with 1000000 C<"a">s. The "grab all you can, and do not give anything back" semantic is desirable in many situations where on the first sight a simple C<()*> looks like the correct solution. Suppose we parse text with comments being delimited by C<"#"> followed by some optional (horizontal) whitespace. Contrary to its appearance, C<#[ \t]*> I<is not> the correct subexpression to match the comment delimiter, because it may "give up" some whitespace if the remainder of the pattern can be made to match that way. The correct answer is either one of these: (?>#[ \t]*) #[ \t]*(?![ \t]) For example, to grab non-empty comments into C<$1>, one should use either one of these: / (?> \# [ \t]* ) ( .+ ) /x; / \# [ \t]* ( [^ \t] .* ) /x; Which one you pick depends on which of these expressions better reflects the above specification of comments. In some literature this construct is called "atomic matching" or "possessive matching". Possessive quantifiers are equivalent to putting the item they are applied to inside of one of these constructs. The following equivalences apply: Quantifier Form Bracketing Form --------------- --------------- PAT*+ (?>PAT*) PAT++ (?>PAT+) PAT?+ (?>PAT?) PAT{min,max}+ (?>PAT{min,max}) Nested C<(?E<gt>...)> constructs are not no-ops, even if at first glance they might seem to be. This is because the nested C<(?E<gt>...)> can restrict internal backtracking that otherwise might occur. For example, "abc" =~ /(?>a[bc]*c)/ matches, but "abc" =~ /(?>a(?>[bc]*)c)/ does not. =item C<(?[ ])> See L<perlrecharclass/Extended Bracketed Character Classes>. Note that this feature is currently L<experimental|perlpolicy/experimental>; using it yields a warning in the C<experimental::regex_sets> category. =back =head2 Backtracking X<backtrack> X<backtracking> NOTE: This section presents an abstract approximation of regular expression behavior. For a more rigorous (and complicated) view of the rules involved in selecting a match among possible alternatives, see L</Combining RE Pieces>. A fundamental feature of regular expression matching involves the notion called I<backtracking>, which is currently used (when needed) by all regular non-possessive expression quantifiers, namely C<"*">, C<*?>, C<"+">, C<+?>, C<{n,m}>, and C<{n,m}?>. Backtracking is often optimized internally, but the general principle outlined here is valid. For a regular expression to match, the I<entire> regular expression must match, not just part of it. So if the beginning of a pattern containing a quantifier succeeds in a way that causes later parts in the pattern to fail, the matching engine backs up and recalculates the beginning part--that's why it's called backtracking. Here is an example of backtracking: Let's say you want to find the word following "foo" in the string "Food is on the foo table.": $_ = "Food is on the foo table."; if ( /\b(foo)\s+(\w+)/i ) { print "$2 follows $1.\n"; } When the match runs, the first part of the regular expression (C<\b(foo)>) finds a possible match right at the beginning of the string, and loads up C<$1> with "Foo". However, as soon as the matching engine sees that there's no whitespace following the "Foo" that it had saved in C<$1>, it realizes its mistake and starts over again one character after where it had the tentative match. This time it goes all the way until the next occurrence of "foo". The complete regular expression matches this time, and you get the expected output of "table follows foo." Sometimes minimal matching can help a lot. Imagine you'd like to match everything between "foo" and "bar". Initially, you write something like this: $_ = "The food is under the bar in the barn."; if ( /foo(.*)bar/ ) { print "got <$1>\n"; } Which perhaps unexpectedly yields: got <d is under the bar in the > That's because C<.*> was greedy, so you get everything between the I<first> "foo" and the I<last> "bar". Here it's more effective to use minimal matching to make sure you get the text between a "foo" and the first "bar" thereafter. if ( /foo(.*?)bar/ ) { print "got <$1>\n" } got <d is under the > Here's another example. Let's say you'd like to match a number at the end of a string, and you also want to keep the preceding part of the match. So you write this: $_ = "I have 2 numbers: 53147"; if ( /(.*)(\d*)/ ) { # Wrong! print "Beginning is <$1>, number is <$2>.\n"; } That won't work at all, because C<.*> was greedy and gobbled up the whole string. As C<\d*> can match on an empty string the complete regular expression matched successfully. Beginning is <I have 2 numbers: 53147>, number is <>. Here are some variants, most of which don't work: $_ = "I have 2 numbers: 53147"; @pats = qw{ (.*)(\d*) (.*)(\d+) (.*?)(\d*) (.*?)(\d+) (.*)(\d+)$ (.*?)(\d+)$ (.*)\b(\d+)$ (.*\D)(\d+)$ }; for $pat (@pats) { printf "%-12s ", $pat; if ( /$pat/ ) { print "<$1> <$2>\n"; } else { print "FAIL\n"; } } That will print out: (.*)(\d*) <I have 2 numbers: 53147> <> (.*)(\d+) <I have 2 numbers: 5314> <7> (.*?)(\d*) <> <> (.*?)(\d+) <I have > <2> (.*)(\d+)$ <I have 2 numbers: 5314> <7> (.*?)(\d+)$ <I have 2 numbers: > <53147> (.*)\b(\d+)$ <I have 2 numbers: > <53147> (.*\D)(\d+)$ <I have 2 numbers: > <53147> As you see, this can be a bit tricky. It's important to realize that a regular expression is merely a set of assertions that gives a definition of success. There may be 0, 1, or several different ways that the definition might succeed against a particular string. And if there are multiple ways it might succeed, you need to understand backtracking to know which variety of success you will achieve. When using lookahead assertions and negations, this can all get even trickier. Imagine you'd like to find a sequence of non-digits not followed by "123". You might try to write that as $_ = "ABC123"; if ( /^\D*(?!123)/ ) { # Wrong! print "Yup, no 123 in $_\n"; } But that isn't going to match; at least, not the way you're hoping. It claims that there is no 123 in the string. Here's a clearer picture of why that pattern matches, contrary to popular expectations: $x = 'ABC123'; $y = 'ABC445'; print "1: got $1\n" if $x =~ /^(ABC)(?!123)/; print "2: got $1\n" if $y =~ /^(ABC)(?!123)/; print "3: got $1\n" if $x =~ /^(\D*)(?!123)/; print "4: got $1\n" if $y =~ /^(\D*)(?!123)/; This prints 2: got ABC 3: got AB 4: got ABC You might have expected test 3 to fail because it seems to a more general purpose version of test 1. The important difference between them is that test 3 contains a quantifier (C<\D*>) and so can use backtracking, whereas test 1 will not. What's happening is that you've asked "Is it true that at the start of C<$x>, following 0 or more non-digits, you have something that's not 123?" If the pattern matcher had let C<\D*> expand to "ABC", this would have caused the whole pattern to fail. The search engine will initially match C<\D*> with "ABC". Then it will try to match C<(?!123)> with "123", which fails. But because a quantifier (C<\D*>) has been used in the regular expression, the search engine can backtrack and retry the match differently in the hope of matching the complete regular expression. The pattern really, I<really> wants to succeed, so it uses the standard pattern back-off-and-retry and lets C<\D*> expand to just "AB" this time. Now there's indeed something following "AB" that is not "123". It's "C123", which suffices. We can deal with this by using both an assertion and a negation. We'll say that the first part in C<$1> must be followed both by a digit and by something that's not "123". Remember that the lookaheads are zero-width expressions--they only look, but don't consume any of the string in their match. So rewriting this way produces what you'd expect; that is, case 5 will fail, but case 6 succeeds: print "5: got $1\n" if $x =~ /^(\D*)(?=\d)(?!123)/; print "6: got $1\n" if $y =~ /^(\D*)(?=\d)(?!123)/; 6: got ABC In other words, the two zero-width assertions next to each other work as though they're ANDed together, just as you'd use any built-in assertions: C</^$/> matches only if you're at the beginning of the line AND the end of the line simultaneously. The deeper underlying truth is that juxtaposition in regular expressions always means AND, except when you write an explicit OR using the vertical bar. C</ab/> means match "a" AND (then) match "b", although the attempted matches are made at different positions because "a" is not a zero-width assertion, but a one-width assertion. B<WARNING>: Particularly complicated regular expressions can take exponential time to solve because of the immense number of possible ways they can use backtracking to try for a match. For example, without internal optimizations done by the regular expression engine, this will take a painfully long time to run: 'aaaaaaaaaaaa' =~ /((a{0,5}){0,5})*[c]/ And if you used C<"*">'s in the internal groups instead of limiting them to 0 through 5 matches, then it would take forever--or until you ran out of stack space. Moreover, these internal optimizations are not always applicable. For example, if you put C<{0,5}> instead of C<"*"> on the external group, no current optimization is applicable, and the match takes a long time to finish. A powerful tool for optimizing such beasts is what is known as an "independent group", which does not backtrack (see L</C<< (?>pattern) >>>). Note also that zero-length lookahead/lookbehind assertions will not backtrack to make the tail match, since they are in "logical" context: only whether they match is considered relevant. For an example where side-effects of lookahead I<might> have influenced the following match, see L</C<< (?>pattern) >>>. =head2 Script Runs X<(*script_run:...)> X<(sr:...)> X<(*atomic_script_run:...)> X<(asr:...)> A script run is basically a sequence of characters, all from the same Unicode script (see L<perlunicode/Scripts>), such as Latin or Greek. In most places a single word would never be written in multiple scripts, unless it is a spoofing attack. An infamous example, is paypal.com Those letters could all be Latin (as in the example just above), or they could be all Cyrillic (except for the dot), or they could be a mixture of the two. In the case of an internet address the C<.com> would be in Latin, And any Cyrillic ones would cause it to be a mixture, not a script run. Someone clicking on such a link would not be directed to the real Paypal website, but an attacker would craft a look-alike one to attempt to gather sensitive information from the person. Starting in Perl 5.28, it is now easy to detect strings that aren't script runs. Simply enclose just about any pattern like either of these: (*script_run:pattern) (*sr:pattern) What happens is that after I<pattern> succeeds in matching, it is subjected to the additional criterion that every character in it must be from the same script (see exceptions below). If this isn't true, backtracking occurs until something all in the same script is found that matches, or all possibilities are exhausted. This can cause a lot of backtracking, but generally, only malicious input will result in this, though the slow down could cause a denial of service attack. If your needs permit, it is best to make the pattern atomic to cut down on the amount of backtracking. This is so likely to be what you want, that instead of writing this: (*script_run:(?>pattern)) you can write either of these: (*atomic_script_run:pattern) (*asr:pattern) (See L</C<(?E<gt>I<pattern>)>>.) In Taiwan, Japan, and Korea, it is common for text to have a mixture of characters from their native scripts and base Chinese. Perl follows Unicode's UTS 39 (L<https://unicode.org/reports/tr39/>) Unicode Security Mechanisms in allowing such mixtures. For example, the Japanese scripts Katakana and Hiragana are commonly mixed together in practice, along with some Chinese characters, and hence are treated as being in a single script run by Perl. The rules used for matching decimal digits are slightly stricter. Many scripts have their own sets of digits equivalent to the Western C<0> through C<9> ones. A few, such as Arabic, have more than one set. For a string to be considered a script run, all digits in it must come from the same set of ten, as determined by the first digit encountered. As an example, qr/(*script_run: \d+ \b )/x guarantees that the digits matched will all be from the same set of 10. You won't get a look-alike digit from a different script that has a different value than what it appears to be. Unicode has three pseudo scripts that are handled specially. "Unknown" is applied to code points whose meaning has yet to be determined. Perl currently will match as a script run, any single character string consisting of one of these code points. But any string longer than one code point containing one of these will not be considered a script run. "Inherited" is applied to characters that modify another, such as an accent of some type. These are considered to be in the script of the master character, and so never cause a script run to not match. The other one is "Common". This consists of mostly punctuation, emoji, and characters used in mathematics and music, the ASCII digits C<0> through C<9>, and full-width forms of these digits. These characters can appear intermixed in text in many of the world's scripts. These also don't cause a script run to not match. But like other scripts, all digits in a run must come from the same set of 10. This construct is non-capturing. You can add parentheses to I<pattern> to capture, if desired. You will have to do this if you plan to use L</(*ACCEPT) (*ACCEPT:arg)> and not have it bypass the script run checking. The C<Script_Extensions> property as modified by UTS 39 (L<https://unicode.org/reports/tr39/>) is used as the basis for this feature. To summarize, =over 4 =item * All length 0 or length 1 sequences are script runs. =item * A longer sequence is a script run if and only if B<all> of the following conditions are met: Z<> =over =item 1 No code point in the sequence has the C<Script_Extension> property of C<Unknown>. This currently means that all code points in the sequence have been assigned by Unicode to be characters that aren't private use nor surrogate code points. =item 2 All characters in the sequence come from the Common script and/or the Inherited script and/or a single other script. The script of a character is determined by the C<Script_Extensions> property as modified by UTS 39 (L<https://unicode.org/reports/tr39/>), as described above. =item 3 All decimal digits in the sequence come from the same block of 10 consecutive digits. =back =back =head2 Special Backtracking Control Verbs These special patterns are generally of the form C<(*I<VERB>:I<arg>)>. Unless otherwise stated the I<arg> argument is optional; in some cases, it is mandatory. Any pattern containing a special backtracking verb that allows an argument has the special behaviour that when executed it sets the current package's C<$REGERROR> and C<$REGMARK> variables. When doing so the following rules apply: On failure, the C<$REGERROR> variable will be set to the I<arg> value of the verb pattern, if the verb was involved in the failure of the match. If the I<arg> part of the pattern was omitted, then C<$REGERROR> will be set to the name of the last C<(*MARK:I<NAME>)> pattern executed, or to TRUE if there was none. Also, the C<$REGMARK> variable will be set to FALSE. On a successful match, the C<$REGERROR> variable will be set to FALSE, and the C<$REGMARK> variable will be set to the name of the last C<(*MARK:I<NAME>)> pattern executed. See the explanation for the C<(*MARK:I<NAME>)> verb below for more details. B<NOTE:> C<$REGERROR> and C<$REGMARK> are not magic variables like C<$1> and most other regex-related variables. They are not local to a scope, nor readonly, but instead are volatile package variables similar to C<$AUTOLOAD>. They are set in the package containing the code that I<executed> the regex (rather than the one that compiled it, where those differ). If necessary, you can use C<local> to localize changes to these variables to a specific scope before executing a regex. If a pattern does not contain a special backtracking verb that allows an argument, then C<$REGERROR> and C<$REGMARK> are not touched at all. =over 3 =item Verbs =over 4 =item C<(*PRUNE)> C<(*PRUNE:I<NAME>)> X<(*PRUNE)> X<(*PRUNE:NAME)> This zero-width pattern prunes the backtracking tree at the current point when backtracked into on failure. Consider the pattern C</I<A> (*PRUNE) I<B>/>, where I<A> and I<B> are complex patterns. Until the C<(*PRUNE)> verb is reached, I<A> may backtrack as necessary to match. Once it is reached, matching continues in I<B>, which may also backtrack as necessary; however, should B not match, then no further backtracking will take place, and the pattern will fail outright at the current starting position. The following example counts all the possible matching strings in a pattern (without actually matching any of them). 'aaab' =~ /a+b?(?{print "$&\n"; $count++})(*FAIL)/; print "Count=$count\n"; which produces: aaab aaa aa a aab aa a ab a Count=9 If we add a C<(*PRUNE)> before the count like the following 'aaab' =~ /a+b?(*PRUNE)(?{print "$&\n"; $count++})(*FAIL)/; print "Count=$count\n"; we prevent backtracking and find the count of the longest matching string at each matching starting point like so: aaab aab ab Count=3 Any number of C<(*PRUNE)> assertions may be used in a pattern. See also C<<< L<< /(?>I<pattern>) >> >>> and possessive quantifiers for other ways to control backtracking. In some cases, the use of C<(*PRUNE)> can be replaced with a C<< (?>pattern) >> with no functional difference; however, C<(*PRUNE)> can be used to handle cases that cannot be expressed using a C<< (?>pattern) >> alone. =item C<(*SKIP)> C<(*SKIP:I<NAME>)> X<(*SKIP)> This zero-width pattern is similar to C<(*PRUNE)>, except that on failure it also signifies that whatever text that was matched leading up to the C<(*SKIP)> pattern being executed cannot be part of I<any> match of this pattern. This effectively means that the regex engine "skips" forward to this position on failure and tries to match again, (assuming that there is sufficient room to match). The name of the C<(*SKIP:I<NAME>)> pattern has special significance. If a C<(*MARK:I<NAME>)> was encountered while matching, then it is that position which is used as the "skip point". If no C<(*MARK)> of that name was encountered, then the C<(*SKIP)> operator has no effect. When used without a name the "skip point" is where the match point was when executing the C<(*SKIP)> pattern. Compare the following to the examples in C<(*PRUNE)>; note the string is twice as long: 'aaabaaab' =~ /a+b?(*SKIP)(?{print "$&\n"; $count++})(*FAIL)/; print "Count=$count\n"; outputs aaab aaab Count=2 Once the 'aaab' at the start of the string has matched, and the C<(*SKIP)> executed, the next starting point will be where the cursor was when the C<(*SKIP)> was executed. =item C<(*MARK:I<NAME>)> C<(*:I<NAME>)> X<(*MARK)> X<(*MARK:NAME)> X<(*:NAME)> This zero-width pattern can be used to mark the point reached in a string when a certain part of the pattern has been successfully matched. This mark may be given a name. A later C<(*SKIP)> pattern will then skip forward to that point if backtracked into on failure. Any number of C<(*MARK)> patterns are allowed, and the I<NAME> portion may be duplicated. In addition to interacting with the C<(*SKIP)> pattern, C<(*MARK:I<NAME>)> can be used to "label" a pattern branch, so that after matching, the program can determine which branches of the pattern were involved in the match. When a match is successful, the C<$REGMARK> variable will be set to the name of the most recently executed C<(*MARK:I<NAME>)> that was involved in the match. This can be used to determine which branch of a pattern was matched without using a separate capture group for each branch, which in turn can result in a performance improvement, as perl cannot optimize C</(?:(x)|(y)|(z))/> as efficiently as something like C</(?:x(*MARK:x)|y(*MARK:y)|z(*MARK:z))/>. When a match has failed, and unless another verb has been involved in failing the match and has provided its own name to use, the C<$REGERROR> variable will be set to the name of the most recently executed C<(*MARK:I<NAME>)>. See L</(*SKIP)> for more details. As a shortcut C<(*MARK:I<NAME>)> can be written C<(*:I<NAME>)>. =item C<(*THEN)> C<(*THEN:I<NAME>)> This is similar to the "cut group" operator C<::> from Raku. Like C<(*PRUNE)>, this verb always matches, and when backtracked into on failure, it causes the regex engine to try the next alternation in the innermost enclosing group (capturing or otherwise) that has alternations. The two branches of a C<(?(I<condition>)I<yes-pattern>|I<no-pattern>)> do not count as an alternation, as far as C<(*THEN)> is concerned. Its name comes from the observation that this operation combined with the alternation operator (C<"|">) can be used to create what is essentially a pattern-based if/then/else block: ( COND (*THEN) FOO | COND2 (*THEN) BAR | COND3 (*THEN) BAZ ) Note that if this operator is used and NOT inside of an alternation then it acts exactly like the C<(*PRUNE)> operator. / A (*PRUNE) B / is the same as / A (*THEN) B / but / ( A (*THEN) B | C ) / is not the same as / ( A (*PRUNE) B | C ) / as after matching the I<A> but failing on the I<B> the C<(*THEN)> verb will backtrack and try I<C>; but the C<(*PRUNE)> verb will simply fail. =item C<(*COMMIT)> C<(*COMMIT:I<arg>)> X<(*COMMIT)> This is the Raku "commit pattern" C<< <commit> >> or C<:::>. It's a zero-width pattern similar to C<(*SKIP)>, except that when backtracked into on failure it causes the match to fail outright. No further attempts to find a valid match by advancing the start pointer will occur again. For example, 'aaabaaab' =~ /a+b?(*COMMIT)(?{print "$&\n"; $count++})(*FAIL)/; print "Count=$count\n"; outputs aaab Count=1 In other words, once the C<(*COMMIT)> has been entered, and if the pattern does not match, the regex engine will not try any further matching on the rest of the string. =item C<(*FAIL)> C<(*F)> C<(*FAIL:I<arg>)> X<(*FAIL)> X<(*F)> This pattern matches nothing and always fails. It can be used to force the engine to backtrack. It is equivalent to C<(?!)>, but easier to read. In fact, C<(?!)> gets optimised into C<(*FAIL)> internally. You can provide an argument so that if the match fails because of this C<FAIL> directive the argument can be obtained from C<$REGERROR>. It is probably useful only when combined with C<(?{})> or C<(??{})>. =item C<(*ACCEPT)> C<(*ACCEPT:I<arg>)> X<(*ACCEPT)> This pattern matches nothing and causes the end of successful matching at the point at which the C<(*ACCEPT)> pattern was encountered, regardless of whether there is actually more to match in the string. When inside of a nested pattern, such as recursion, or in a subpattern dynamically generated via C<(??{})>, only the innermost pattern is ended immediately. If the C<(*ACCEPT)> is inside of capturing groups then the groups are marked as ended at the point at which the C<(*ACCEPT)> was encountered. For instance: 'AB' =~ /(A (A|B(*ACCEPT)|C) D)(E)/x; will match, and C<$1> will be C<AB> and C<$2> will be C<"B">, C<$3> will not be set. If another branch in the inner parentheses was matched, such as in the string 'ACDE', then the C<"D"> and C<"E"> would have to be matched as well. You can provide an argument, which will be available in the var C<$REGMARK> after the match completes. =back =back =head2 Warning on C<\1> Instead of C<$1> Some people get too used to writing things like: $pattern =~ s/(\W)/\\\1/g; This is grandfathered (for \1 to \9) for the RHS of a substitute to avoid shocking the B<sed> addicts, but it's a dirty habit to get into. That's because in PerlThink, the righthand side of an C<s///> is a double-quoted string. C<\1> in the usual double-quoted string means a control-A. The customary Unix meaning of C<\1> is kludged in for C<s///>. However, if you get into the habit of doing that, you get yourself into trouble if you then add an C</e> modifier. s/(\d+)/ \1 + 1 /eg; # causes warning under -w Or if you try to do s/(\d+)/\1000/; You can't disambiguate that by saying C<\{1}000>, whereas you can fix it with C<${1}000>. The operation of interpolation should not be confused with the operation of matching a backreference. Certainly they mean two different things on the I<left> side of the C<s///>. =head2 Repeated Patterns Matching a Zero-length Substring B<WARNING>: Difficult material (and prose) ahead. This section needs a rewrite. Regular expressions provide a terse and powerful programming language. As with most other power tools, power comes together with the ability to wreak havoc. A common abuse of this power stems from the ability to make infinite loops using regular expressions, with something as innocuous as: 'foo' =~ m{ ( o? )* }x; The C<o?> matches at the beginning of "C<foo>", and since the position in the string is not moved by the match, C<o?> would match again and again because of the C<"*"> quantifier. Another common way to create a similar cycle is with the looping modifier C</g>: @matches = ( 'foo' =~ m{ o? }xg ); or print "match: <$&>\n" while 'foo' =~ m{ o? }xg; or the loop implied by C<split()>. However, long experience has shown that many programming tasks may be significantly simplified by using repeated subexpressions that may match zero-length substrings. Here's a simple example being: @chars = split //, $string; # // is not magic in split ($whitewashed = $string) =~ s/()/ /g; # parens avoid magic s// / Thus Perl allows such constructs, by I<forcefully breaking the infinite loop>. The rules for this are different for lower-level loops given by the greedy quantifiers C<*+{}>, and for higher-level ones like the C</g> modifier or C<split()> operator. The lower-level loops are I<interrupted> (that is, the loop is broken) when Perl detects that a repeated expression matched a zero-length substring. Thus m{ (?: NON_ZERO_LENGTH | ZERO_LENGTH )* }x; is made equivalent to m{ (?: NON_ZERO_LENGTH )* (?: ZERO_LENGTH )? }x; For example, this program #!perl -l "aaaaab" =~ / (?: a # non-zero | # or (?{print "hello"}) # print hello whenever this # branch is tried (?=(b)) # zero-width assertion )* # any number of times /x; print $&; print $1; prints hello aaaaa b Notice that "hello" is only printed once, as when Perl sees that the sixth iteration of the outermost C<(?:)*> matches a zero-length string, it stops the C<"*">. The higher-level loops preserve an additional state between iterations: whether the last match was zero-length. To break the loop, the following match after a zero-length match is prohibited to have a length of zero. This prohibition interacts with backtracking (see L</"Backtracking">), and so the I<second best> match is chosen if the I<best> match is of zero length. For example: $_ = 'bar'; s/\w??/<$&>/g; results in C<< <><b><><a><><r><> >>. At each position of the string the best match given by non-greedy C<??> is the zero-length match, and the I<second best> match is what is matched by C<\w>. Thus zero-length matches alternate with one-character-long matches. Similarly, for repeated C<m/()/g> the second-best match is the match at the position one notch further in the string. The additional state of being I<matched with zero-length> is associated with the matched string, and is reset by each assignment to C<pos()>. Zero-length matches at the end of the previous match are ignored during C<split>. =head2 Combining RE Pieces Each of the elementary pieces of regular expressions which were described before (such as C<ab> or C<\Z>) could match at most one substring at the given position of the input string. However, in a typical regular expression these elementary pieces are combined into more complicated patterns using combining operators C<ST>, C<S|T>, C<S*> I<etc>. (in these examples C<"S"> and C<"T"> are regular subexpressions). Such combinations can include alternatives, leading to a problem of choice: if we match a regular expression C<a|ab> against C<"abc">, will it match substring C<"a"> or C<"ab">? One way to describe which substring is actually matched is the concept of backtracking (see L</"Backtracking">). However, this description is too low-level and makes you think in terms of a particular implementation. Another description starts with notions of "better"/"worse". All the substrings which may be matched by the given regular expression can be sorted from the "best" match to the "worst" match, and it is the "best" match which is chosen. This substitutes the question of "what is chosen?" by the question of "which matches are better, and which are worse?". Again, for elementary pieces there is no such question, since at most one match at a given position is possible. This section describes the notion of better/worse for combining operators. In the description below C<"S"> and C<"T"> are regular subexpressions. =over 4 =item C<ST> Consider two possible matches, C<AB> and C<A'B'>, C<"A"> and C<A'> are substrings which can be matched by C<"S">, C<"B"> and C<B'> are substrings which can be matched by C<"T">. If C<"A"> is a better match for C<"S"> than C<A'>, C<AB> is a better match than C<A'B'>. If C<"A"> and C<A'> coincide: C<AB> is a better match than C<AB'> if C<"B"> is a better match for C<"T"> than C<B'>. =item C<S|T> When C<"S"> can match, it is a better match than when only C<"T"> can match. Ordering of two matches for C<"S"> is the same as for C<"S">. Similar for two matches for C<"T">. =item C<S{REPEAT_COUNT}> Matches as C<SSS...S> (repeated as many times as necessary). =item C<S{min,max}> Matches as C<S{max}|S{max-1}|...|S{min+1}|S{min}>. =item C<S{min,max}?> Matches as C<S{min}|S{min+1}|...|S{max-1}|S{max}>. =item C<S?>, C<S*>, C<S+> Same as C<S{0,1}>, C<S{0,BIG_NUMBER}>, C<S{1,BIG_NUMBER}> respectively. =item C<S??>, C<S*?>, C<S+?> Same as C<S{0,1}?>, C<S{0,BIG_NUMBER}?>, C<S{1,BIG_NUMBER}?> respectively. =item C<< (?>S) >> Matches the best match for C<"S"> and only that. =item C<(?=S)>, C<(?<=S)> Only the best match for C<"S"> is considered. (This is important only if C<"S"> has capturing parentheses, and backreferences are used somewhere else in the whole regular expression.) =item C<(?!S)>, C<(?<!S)> For this grouping operator there is no need to describe the ordering, since only whether or not C<"S"> can match is important. =item C<(??{ I<EXPR> })>, C<(?I<PARNO>)> The ordering is the same as for the regular expression which is the result of I<EXPR>, or the pattern contained by capture group I<PARNO>. =item C<(?(I<condition>)I<yes-pattern>|I<no-pattern>)> Recall that which of I<yes-pattern> or I<no-pattern> actually matches is already determined. The ordering of the matches is the same as for the chosen subexpression. =back The above recipes describe the ordering of matches I<at a given position>. One more rule is needed to understand how a match is determined for the whole regular expression: a match at an earlier position is always better than a match at a later position. =head2 Creating Custom RE Engines As of Perl 5.10.0, one can create custom regular expression engines. This is not for the faint of heart, as they have to plug in at the C level. See L<perlreapi> for more details. As an alternative, overloaded constants (see L<overload>) provide a simple way to extend the functionality of the RE engine, by substituting one pattern for another. Suppose that we want to enable a new RE escape-sequence C<\Y|> which matches at a boundary between whitespace characters and non-whitespace characters. Note that C<(?=\S)(?<!\S)|(?!\S)(?<=\S)> matches exactly at these positions, so we want to have each C<\Y|> in the place of the more complicated version. We can create a module C<customre> to do this: package customre; use overload; sub import { shift; die "No argument to customre::import allowed" if @_; overload::constant 'qr' => \&convert; } sub invalid { die "/$_[0]/: invalid escape '\\$_[1]'"} # We must also take care of not escaping the legitimate \\Y| # sequence, hence the presence of '\\' in the conversion rules. my %rules = ( '\\' => '\\\\', 'Y|' => qr/(?=\S)(?<!\S)|(?!\S)(?<=\S)/ ); sub convert { my $re = shift; $re =~ s{ \\ ( \\ | Y . ) } { $rules{$1} or invalid($re,$1) }sgex; return $re; } Now C<use customre> enables the new escape in constant regular expressions, I<i.e.>, those without any runtime variable interpolations. As documented in L<overload>, this conversion will work only over literal parts of regular expressions. For C<\Y|$re\Y|> the variable part of this regular expression needs to be converted explicitly (but only if the special meaning of C<\Y|> should be enabled inside C<$re>): use customre; $re = <>; chomp $re; $re = customre::convert $re; /\Y|$re\Y|/; =head2 Embedded Code Execution Frequency The exact rules for how often C<(??{})> and C<(?{})> are executed in a pattern are unspecified. In the case of a successful match you can assume that they DWIM and will be executed in left to right order the appropriate number of times in the accepting path of the pattern as would any other meta-pattern. How non-accepting pathways and match failures affect the number of times a pattern is executed is specifically unspecified and may vary depending on what optimizations can be applied to the pattern and is likely to change from version to version. For instance in "aaabcdeeeee"=~/a(?{print "a"})b(?{print "b"})cde/; the exact number of times "a" or "b" are printed out is unspecified for failure, but you may assume they will be printed at least once during a successful match, additionally you may assume that if "b" is printed, it will be preceded by at least one "a". In the case of branching constructs like the following: /a(b|(?{ print "a" }))c(?{ print "c" })/; you can assume that the input "ac" will output "ac", and that "abc" will output only "c". When embedded code is quantified, successful matches will call the code once for each matched iteration of the quantifier. For example: "good" =~ /g(?:o(?{print "o"}))*d/; will output "o" twice. =head2 PCRE/Python Support As of Perl 5.10.0, Perl supports several Python/PCRE-specific extensions to the regex syntax. While Perl programmers are encouraged to use the Perl-specific syntax, the following are also accepted: =over 4 =item C<< (?PE<lt>I<NAME>E<gt>I<pattern>) >> Define a named capture group. Equivalent to C<< (?<I<NAME>>I<pattern>) >>. =item C<< (?P=I<NAME>) >> Backreference to a named capture group. Equivalent to C<< \g{I<NAME>} >>. =item C<< (?P>I<NAME>) >> Subroutine call to a named capture group. Equivalent to C<< (?&I<NAME>) >>. =back =head1 BUGS There are a number of issues with regard to case-insensitive matching in Unicode rules. See C<"i"> under L</Modifiers> above. This document varies from difficult to understand to completely and utterly opaque. The wandering prose riddled with jargon is hard to fathom in several places. This document needs a rewrite that separates the tutorial content from the reference content. =head1 SEE ALSO The syntax of patterns used in Perl pattern matching evolved from those supplied in the Bell Labs Research Unix 8th Edition (Version 8) regex routines. (The code is actually derived (distantly) from Henry Spencer's freely redistributable reimplementation of those V8 routines.) L<perlrequick>. L<perlretut>. L<perlop/"Regexp Quote-Like Operators">. L<perlop/"Gory details of parsing quoted constructs">. L<perlfaq6>. L<perlfunc/pos>. L<perllocale>. L<perlebcdic>. I<Mastering Regular Expressions> by Jeffrey Friedl, published by O'Reilly and Associates. perl5283delta.pod 0000644 00000011767 15125556335 0007574 0 ustar 00 =encoding utf8 =head1 NAME perl5283delta - what is new for perl v5.28.3 =head1 DESCRIPTION This document describes differences between the 5.28.2 release and the 5.28.3 release. If you are upgrading from an earlier release such as 5.28.1, first read L<perl5282delta>, which describes differences between 5.28.1 and 5.28.2. =head1 Security =head2 [CVE-2020-10543] Buffer overflow caused by a crafted regular expression A signed C<size_t> integer overflow in the storage space calculations for nested regular expression quantifiers could cause a heap buffer overflow in Perl's regular expression compiler that overwrites memory allocated after the regular expression storage space with attacker supplied data. The target system needs a sufficient amount of memory to allocate partial expansions of the nested quantifiers prior to the overflow occurring. This requirement is unlikely to be met on 64-bit systems. Discovered by: ManhND of The Tarantula Team, VinCSS (a member of Vingroup). =head2 [CVE-2020-10878] Integer overflow via malformed bytecode produced by a crafted regular expression Integer overflows in the calculation of offsets between instructions for the regular expression engine could cause corruption of the intermediate language state of a compiled regular expression. An attacker could abuse this behaviour to insert instructions into the compiled form of a Perl regular expression. Discovered by: Hugo van der Sanden and Slaven Rezic. =head2 [CVE-2020-12723] Buffer overflow caused by a crafted regular expression Recursive calls to C<S_study_chunk()> by Perl's regular expression compiler to optimize the intermediate language representation of a regular expression could cause corruption of the intermediate language state of a compiled regular expression. Discovered by: Sergey Aleynikov. =head2 Additional Note An application written in Perl would only be vulnerable to any of the above flaws if it evaluates regular expressions supplied by the attacker. Evaluating regular expressions in this fashion is known to be dangerous since the regular expression engine does not protect against denial of service attacks in this usage scenario. =head1 Incompatible Changes There are no changes intentionally incompatible with Perl 5.28.2. If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Module::CoreList> has been upgraded from version 5.20190419 to 5.20200601_28. =back =head1 Testing Tests were added and changed to reflect the other additions and changes in this release. =head1 Acknowledgements Perl 5.28.3 represents approximately 13 months of development since Perl 5.28.2 and contains approximately 3,100 lines of changes across 48 files from 16 authors. Excluding auto-generated files, documentation and release tools, there were approximately 1,700 lines of changes to 9 .pm, .t, .c and .h files. Perl continues to flourish into its fourth decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.28.3: Chris 'BinGOs' Williams, Dan Book, Hugo van der Sanden, James E Keenan, John Lightsey, Karen Etheridge, Karl Williamson, Matthew Horsfall, Max Maischein, Nicolas R., Renee Baecker, Sawyer X, Steve Hay, Tom Hukins, Tony Cook, Zak B. Elep. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the perl bug database at L<https://github.com/Perl/perl5/issues>. There may also be information at L<https://www.perl.org/>, the Perl Home Page. If you believe you have an unreported bug, please open an issue at L<https://github.com/Perl/perl5/issues>. Be sure to trim your bug down to a tiny but sufficient test case. If the bug you are reporting has security implications which make it inappropriate to send to a public issue tracker, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 Give Thanks If you wish to thank the Perl 5 Porters for the work we had done in Perl 5, you can do so by running the C<perlthanks> program: perlthanks This will send an email to the Perl 5 Porters list with your show of thanks. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perltru64.pod 0000644 00000020454 15125556335 0007136 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specially designed to be readable as is. =head1 NAME perltru64 - Perl version 5 on Tru64 (formerly known as Digital UNIX formerly known as DEC OSF/1) systems =head1 DESCRIPTION This document describes various features of HP's (formerly Compaq's, formerly Digital's) Unix operating system (Tru64) that will affect how Perl version 5 (hereafter just Perl) is configured, compiled and/or runs. =head2 Compiling Perl 5 on Tru64 The recommended compiler to use in Tru64 is the native C compiler. The native compiler produces much faster code (the speed difference is noticeable: several dozen percentages) and also more correct code: if you are considering using the GNU C compiler you should use at the very least the release of 2.95.3 since all older gcc releases are known to produce broken code when compiling Perl. One manifestation of this brokenness is the lib/sdbm test dumping core; another is many of the op/regexp and op/pat, or ext/Storable tests dumping core (the exact pattern of failures depending on the GCC release and optimization flags). Both the native cc and gcc seem to consume lots of memory when building Perl. toke.c is a known trouble spot when optimizing: 256 megabytes of data section seems to be enough. Another known trouble spot is the mktables script which builds the Unicode support tables. The default setting of the process data section in Tru64 should be one gigabyte, but some sites/setups might have lowered that. The configuration process of Perl checks for too low process limits, and lowers the optimization for the toke.c if necessary, and also gives advice on how to raise the process limits (for example: C<ulimit -d 262144>) Also, Configure might abort with Build a threading Perl? [n] Configure[2437]: Syntax error at line 1 : 'config.sh' is not expected. This indicates that Configure is being run with a broken Korn shell (even though you think you are using a Bourne shell by using "sh Configure" or "./Configure"). The Korn shell bug has been reported to Compaq as of February 1999 but in the meanwhile, the reason ksh is being used is that you have the environment variable BIN_SH set to 'xpg4'. This causes /bin/sh to delegate its duties to /bin/posix/sh (a ksh). Unset the environment variable and rerun Configure. =head2 Using Large Files with Perl on Tru64 In Tru64 Perl is automatically able to use large files, that is, files larger than 2 gigabytes, there is no need to use the Configure -Duselargefiles option as described in INSTALL (though using the option is harmless). =head2 Threaded Perl on Tru64 If you want to use threads, you should primarily use the Perl 5.8.0 threads model by running Configure with -Duseithreads. Perl threading is going to work only in Tru64 4.0 and newer releases, older operating releases like 3.2 aren't probably going to work properly with threads. In Tru64 V5 (at least V5.1A, V5.1B) you cannot build threaded Perl with gcc because the system header <pthread.h> explicitly checks for supported C compilers, gcc (at least 3.2.2) not being one of them. But the system C compiler should work just fine. =head2 Long Doubles on Tru64 You cannot Configure Perl to use long doubles unless you have at least Tru64 V5.0, the long double support simply wasn't functional enough before that. Perl's Configure will override attempts to use the long doubles (you can notice this by Configure finding out that the modfl() function does not work as it should). At the time of this writing (June 2002), there is a known bug in the Tru64 libc printing of long doubles when not using "e" notation. The values are correct and usable, but you only get a limited number of digits displayed unless you force the issue by using C<printf "%.33e",$num> or the like. For Tru64 versions V5.0A through V5.1A, a patch is expected sometime after perl 5.8.0 is released. If your libc has not yet been patched, you'll get a warning from Configure when selecting long doubles. =head2 DB_File tests failing on Tru64 The DB_File tests (db-btree.t, db-hash.t, db-recno.t) may fail you have installed a newer version of Berkeley DB into the system and the -I and -L compiler and linker flags introduce version conflicts with the DB 1.85 headers and libraries that came with the Tru64. For example, mixing a DB v2 library with the DB v1 headers is a bad idea. Watch out for Configure options -Dlocincpth and -Dloclibpth, and check your /usr/local/include and /usr/local/lib since they are included by default. The second option is to explicitly instruct Configure to detect the newer Berkeley DB installation, by supplying the right directories with C<-Dlocincpth=/some/include> and C<-Dloclibpth=/some/lib> B<and> before running "make test" setting your LD_LIBRARY_PATH to F</some/lib>. The third option is to work around the problem by disabling the DB_File completely when build Perl by specifying -Ui_db to Configure, and then using the BerkeleyDB module from CPAN instead of DB_File. The BerkeleyDB works with Berkeley DB versions 2.* or greater. The Berkeley DB 4.1.25 has been tested with Tru64 V5.1A and found to work. The latest Berkeley DB can be found from L<http://www.sleepycat.com>. =head2 64-bit Perl on Tru64 In Tru64 Perl's integers are automatically 64-bit wide, there is no need to use the Configure -Duse64bitint option as described in INSTALL. Similarly, there is no need for -Duse64bitall since pointers are automatically 64-bit wide. =head2 Warnings about floating-point overflow when compiling Perl on Tru64 When compiling Perl in Tru64 you may (depending on the compiler release) see two warnings like this cc: Warning: numeric.c, line 104: In this statement, floating-point overflow occurs in evaluating the expression "1.8e308". (floatoverfl) return HUGE_VAL; -----------^ and when compiling the POSIX extension cc: Warning: const-c.inc, line 2007: In this statement, floating-point overflow occurs in evaluating the expression "1.8e308". (floatoverfl) return HUGE_VAL; -------------------^ The exact line numbers may vary between Perl releases. The warnings are benign and can be ignored: in later C compiler releases the warnings should be gone. When the file F<pp_sys.c> is being compiled you may (depending on the operating system release) see an additional compiler flag being used: C<-DNO_EFF_ONLY_OK>. This is normal and refers to a feature that is relevant only if you use the C<filetest> pragma. In older releases of the operating system the feature was broken and the NO_EFF_ONLY_OK instructs Perl not to use the feature. =head1 Testing Perl on Tru64 During "make test" the C<comp>/C<cpp> will be skipped because on Tru64 it cannot be tested before Perl has been installed. The test refers to the use of the C<-P> option of Perl. =head1 ext/ODBM_File/odbm Test Failing With Static Builds The ext/ODBM_File/odbm is known to fail with static builds (Configure -Uusedl) due to a known bug in Tru64's static libdbm library. The good news is that you very probably don't need to ever use the ODBM_File extension since more advanced NDBM_File works fine, not to mention the even more advanced DB_File. =head1 Perl Fails Because Of Unresolved Symbol sockatmark If you get an error like Can't load '.../OSF1/lib/perl5/5.8.0/alpha-dec_osf/auto/IO/IO.so' for module IO: Unresolved symbol in .../lib/perl5/5.8.0/alpha-dec_osf/auto/IO/IO.so: sockatmark at .../lib/perl5/5.8.0/alpha-dec_osf/XSLoader.pm line 75. you need to either recompile your Perl in Tru64 4.0D or upgrade your Tru64 4.0D to at least 4.0F: the sockatmark() system call was added in Tru64 4.0F, and the IO extension refers that symbol. =head1 read_cur_obj_info: bad file magic number You may be mixing the Tru64 cc/ar/ld with the GNU gcc/ar/ld. That may work, but sometimes it doesn't (your gcc or GNU utils may have been compiled for an incompatible OS release). Try 'which ld' and 'which ld' (or try 'ar --version' and 'ld --version', which work only for the GNU tools, and will announce themselves to be such), and adjust your PATH so that you are consistently using either the native tools or the GNU tools. After fixing your PATH, you should do 'make distclean' and start all the way from running the Configure since you may have quite a confused situation. =head1 AUTHOR Jarkko Hietaniemi <jhi@iki.fi> =cut perlgov.pod 0000644 00000034221 15125556335 0006742 0 ustar 00 =encoding utf-8 =head1 NAME perlgov - Perl Rules of Governance =head1 PREAMBLE We are forming a system of governance for development of the Perl programming language. The scope of governance includes the language definition, its implementation, its test suite, its documentation, and the policies and procedures by which it is developed and maintained. The system of governance includes definitions of the groups that will make decisions, the rules by which these groups are formed and changed, and the enumerated powers and constraints on the activities of these governing groups. In forming a system of governance, we seek to achieve the following goals: =over =item * We want a system that is functional. That means the governing groups may decide to undertake large changes, or they may decide to act conservatively, but they will act with intent and clear communication rather than fail to reach decisions when needed. =item * We want a system that is trusted. That means that a reasonable contributor to Perl might disagree with decisions made by the governing groups, but will accept that they were made in good faith in consultation with relevant communities outside the governing groups. =item * We want a system that is sustainable. That means it has provisions to self-modify, including ways of adding new members to the governing groups, ways to survive members becoming inactive, and ways of amending the rules of governance themselves if needed. =item * We want a system that is transparent. That means that it will prefer policies that manage ordinary matters in public, and it will prefer secrecy in a limited number of situations. =item * We want a system that is respectful. That means that it will establish standards of civil discourse that allow for healthy disagreement but avoid rancor and hostility in the community for which it is responsible. =back =head1 Mandate Perl language governance shall work to: =over =item * Maintain the quality, stability, and continuity of the Perl language and interpreter =item * Guide the evolution of the Perl language and interpreter =item * Establish and oversee the policies, procedures, systems, and mechanisms that enable a community of contributors to the Perl language and interpreter =item * Encourage discussion and consensus among contributors as preferential to formal decision making by governance groups =item * Facilitate communication between contributors and external stakeholders in the broader Perl ecosystem =back =head1 Definitions This document describes three roles involved in governance: =over =item "Core Team" =item "Steering Council" =item "Vote Administrator" =back A section on each follows. =head2 The Core Team The Core Team are a group of trusted volunteers involved in the ongoing development of the Perl language and interpreter. They are not required to be language developers or committers. References to specific votes are explained in the "Rules for Voting" section. =head3 Powers In addition to their contributions to the Perl language, the Core Team sets the rules of Perl governance, decides who participates in what role in governance, and delegates substantial decision making power to the Steering Council. Specifically: =over =item * They elect the Steering Council and have the power to remove Steering Council members. =item * In concert with the Steering Council, they manage Core Team membership. =item * In concert with the Steering Council, they have the power to modify the Perl Rules of Governance. =back The Core Team do not have any authority over parts of the Perl ecosystem unrelated to developing and releasing the language itself. These include, but are not limited to: =over =item * The Perl Foundation =item * CPAN administration and CPAN authors =item * perl.org, metacpan.org, and other community-maintained websites and services =item * Perl conferences and events, except those organized directly by the Core Team =item * Perl-related intellectual property legally owned by third-parties, except as allowed by applicable licenses or agreements =back =head3 Membership The initial Core Team members will be specified when this document is first ratified. Any Core Team member may nominate someone to be added to the Core Team by sending the nomination to the Steering Council. The Steering Council must approve or reject the nomination. If approved, the Steering Council will organize a Membership Change Vote to ratify the addition. Core Team members should demonstrate: =over =item * A solid track record of being constructive and helpful =item * Significant contributions to the project's goals, in any form =item * Willingness to dedicate some time to improving Perl =back Contributions are not limited to code. Here is an incomplete list of areas where contributions may be considered for joining the Core Team: =over =item * Working on community management and outreach =item * Providing support on mailing lists, IRC, or other forums =item * Triaging tickets =item * Writing patches (code, docs, or tests) =item * Reviewing patches (code, docs, or tests) =item * Participating in design discussions =item * Providing expertise in a particular domain (security, i18n, etc.) =item * Managing Perl infrastructure (websites, CI, documentation, etc.) =item * Maintaining significant projects in the Perl ecosystem =item * Creating visual designs =back Core Team membership acknowledges sustained and valuable efforts that align well with the philosophy and the goals of the Perl project. Core Team members are expected to act as role models for the community and custodians of the project, on behalf of the community and all those who rely on Perl. =head3 Term Core Team members serve until they are removed. =head3 Removal Core Team Members may resign their position at any time. In exceptional circumstances, it may be necessary to remove someone from the Core Team against their will, such as for flagrant or repeated violations of a Code of Conduct. Any Core Team member may send a recall request to the Steering Council naming the individual to be removed. The Steering Council must approve or reject the recall request. If approved, the Steering Council will organize a Membership Change vote to ratify the removal. If the removed member is also on the Steering Council, then they are removed from the Steering Council as well. =head3 Inactivity Core Team members who have stopped contributing are encouraged to declare themselves "inactive". Inactive members do not nominate or vote. Inactive members may declare themselves active at any time, except when a vote has been proposed and is not concluded. Eligibility to nominate or vote will be determined by the Vote Administrator. To record and honor their contributions, inactive Core Team members will continue to be listed alongside active members. =head3 No Confidence in the Steering Council The Core Team may remove either a single Steering Council member or the entire Steering Council via a No Confidence Vote. A No Confidence Vote is triggered when a Core Team member calls for one publicly on an appropriate project communication channel, and another Core Team member seconds the proposal. If a No Confidence Vote removes all Steering Council members, the Vote Administrator of the No Confidence Vote will then administer an election to select a new Steering Council. =head3 Amending Perl Rules of Governance Any Core Team member may propose amending the Perl Rules of Governance by sending a proposal to the Steering Council. The Steering Council must decide to approve or reject the proposal. If approved, the Steering Council will administer an Amendment Vote. =head3 Rules for Voting Membership Change, Amendment, and No Confidence Votes require 2/3 of participating votes from Core Team members to pass. A Vote Administrator must be selected following the rules in the "Vote Administrator" section. The vote occurs in two steps: =over =item 1 The Vote Administrator describes the proposal being voted upon. The Core Team then may discuss the matter in advance of voting. =item 2 Active Core Team members vote in favor or against the proposal. Voting is performed anonymously. =back For a Membership Change Vote, each phase will last one week. For Amendment and No Confidence Votes, each phase will last two weeks. =head2 The Steering Council The Steering Council is a 3-person committee, elected by the Core Team. Candidates are not required to be members of the Core Team. Non-member candidates are added to the Core Team if elected as if by a Membership Change Vote. References to specific elections are explained in the "Rules for Elections" section. =head3 Powers The Steering Council has broad authority to make decisions about the development of the Perl language, the interpreter, and all other components, systems and processes that result in new releases of the language interpreter. For example, it can: =over =item * Manage the schedule and process for shipping new releases =item * Establish procedures for proposing, discussing and deciding upon changes to the language =item * Delegate power to individuals on or outside the Steering Council =back Decisions of the Steering Council will be made by majority vote of non-vacant seats on the council. The Steering Council should look for ways to use these powers as little as possible. Instead of voting, it's better to seek consensus. Instead of ruling on individual cases, it's better to define standards and processes that apply to all cases. As with the Core Team, the Steering Council does not have any authority over parts of the Perl ecosystem unrelated to developing and releasing the language itself. The Steering Council does not have the power to modify the Perl Rules of Governance, except as provided in the section "Amending Perl Rules of Governance". =head3 Term A new Steering Council will be chosen by a Term Election within two weeks after each stable feature release (that is, change to C<PERL_REVISION> or C<PERL_VERSION>) or after two years, whichever comes first. The council members will serve until the completion of the next Term Election unless they are removed. =head3 Removal Steering Council members may resign their position at any time. Whenever there are vacancies on the Steering Council, the council will organize a Special Election within one week after the vacancy occurs. If the entire Steering Council is ever vacant, a Term Election will be held instead. If a Steering Council member is deceased, or drops out of touch and cannot be contacted for a month or longer, then the rest of the council may vote to declare their seat vacant. If an absent member returns after such a declaration is made, they are not reinstated automatically, but may run in the Special Election to fill the vacancy. Otherwise, Steering Council members may only be removed before the end of their term through a No Confidence Vote by the Core Team. =head3 Rules for Elections Term and Special Election are ranked-choice votes to construct an ordered list of candidates to fill vacancies in the Steering Council. A Vote Administrator must be selected following the rules in the "Vote Administrator" section. Both Term and Special Elections occur in two stages: =over =item 1 Candidates advertise their interest in serving. Candidates must be nominated by an active Core Team member. Self-nominations are allowed. Nominated candidates may share a statement about their candidacy with the Core Team. =item 2 Active Core Team Members vote by ranking all candidates. Voting is performed anonymously. After voting is complete, candidates are ranked using the Condorcet Internet Voting Service's proportional representation mode. If a tie occurs, it may be resolved by mutual agreement among the tied candidates, or else the tie will be resolved through random selection by the Vote Administrator. =back Anyone voted off the Core Team is not eligible to be a candidate for Steering Council unless re-instated to the Core Team. For a Term Election, each phase will last two weeks. At the end of the second phase, the top three ranked candidates are elected as the new Steering Council. For a Special Election, each phase will last one week. At the end of the second phase, vacancies are filled from the ordered list of candidates until no vacancies remain. The election of the first Steering Council will be a Term Election. Ricardo Signes will be the Vote Administrator for the initial Term Election unless he is a candidate, in which case he will select a non-candidate administrator to replace him. =head2 The Vote Administrator Every election or vote requires a Vote Administrator who manages communication, collection of secret ballots, and all other necessary activities to complete the voting process. Unless otherwise specified, the Steering Council selects the Vote Administrator. A Vote Administrator must not be a member of the Steering Council nor a candidate or subject of the vote. A Vote Administrator may be a member of the Core Team and, if so, may cast a vote while also serving as administrator. If the Vote Administrator becomes a candidate during an election vote, they will appoint a non-candidate replacement. If the entire Steering Council is vacant or is the subject of a No Confidence Vote, then the Core Team will select a Vote Administrator by consensus. If consensus cannot be reached within one week, the President of The Perl Foundation will select a Vote Administrator. =head1 Core Team Members The current members of the Perl Core Team are: =over =item * Abhijit Menon-Sen (inactive) =item * Andy Dougherty =item * Chad Granum =item * Chris 'BinGOs' Williams =item * Craig Berry =item * Dagfinn Ilmari Mannsåker =item * Dave Mitchell =item * David Golden =item * H. Merijn Brand =item * Hugo van der Sanden =item * James E Keenan =item * Jan Dubois (inactive) =item * Jesse Vincent (inactive) =item * Karen Etheridge =item * Karl Williamson =item * Leon Timmermans =item * Matthew Horsfall =item * Max Maischein =item * Nicholas Clark =item * Nicolas R. =item * Paul "LeoNerd" Evans =item * Philippe "BooK" Bruhat =item * Ricardo Signes =item * Sawyer X =item * Steve Hay =item * Stuart Mackintosh =item * Todd Rinaldo =item * Tony Cook =back perlnewmod.pod 0000644 00000025435 15125556335 0007447 0 ustar 00 =head1 NAME perlnewmod - preparing a new module for distribution =head1 DESCRIPTION This document gives you some suggestions about how to go about writing Perl modules, preparing them for distribution, and making them available via CPAN. One of the things that makes Perl really powerful is the fact that Perl hackers tend to want to share the solutions to problems they've faced, so you and I don't have to battle with the same problem again. The main way they do this is by abstracting the solution into a Perl module. If you don't know what one of these is, the rest of this document isn't going to be much use to you. You're also missing out on an awful lot of useful code; consider having a look at L<perlmod>, L<perlmodlib> and L<perlmodinstall> before coming back here. When you've found that there isn't a module available for what you're trying to do, and you've had to write the code yourself, consider packaging up the solution into a module and uploading it to CPAN so that others can benefit. You should also take a look at L<perlmodstyle> for best practices in making a module. =head2 Warning We're going to primarily concentrate on Perl-only modules here, rather than XS modules. XS modules serve a rather different purpose, and you should consider different things before distributing them - the popularity of the library you are gluing, the portability to other operating systems, and so on. However, the notes on preparing the Perl side of the module and packaging and distributing it will apply equally well to an XS module as a pure-Perl one. =head2 What should I make into a module? You should make a module out of any code that you think is going to be useful to others. Anything that's likely to fill a hole in the communal library and which someone else can slot directly into their program. Any part of your code which you can isolate and extract and plug into something else is a likely candidate. Let's take an example. Suppose you're reading in data from a local format into a hash-of-hashes in Perl, turning that into a tree, walking the tree and then piping each node to an Acme Transmogrifier Server. Now, quite a few people have the Acme Transmogrifier, and you've had to write something to talk the protocol from scratch - you'd almost certainly want to make that into a module. The level at which you pitch it is up to you: you might want protocol-level modules analogous to L<Net::SMTP|Net::SMTP> which then talk to higher level modules analogous to L<Mail::Send|Mail::Send>. The choice is yours, but you do want to get a module out for that server protocol. Nobody else on the planet is going to talk your local data format, so we can ignore that. But what about the thing in the middle? Building tree structures from Perl variables and then traversing them is a nice, general problem, and if nobody's already written a module that does that, you might want to modularise that code too. So hopefully you've now got a few ideas about what's good to modularise. Let's now see how it's done. =head2 Step-by-step: Preparing the ground Before we even start scraping out the code, there are a few things we'll want to do in advance. =over 3 =item Look around Dig into a bunch of modules to see how they're written. I'd suggest starting with L<Text::Tabs|Text::Tabs>, since it's in the standard library and is nice and simple, and then looking at something a little more complex like L<File::Copy|File::Copy>. For object oriented code, L<WWW::Mechanize> or the C<Email::*> modules provide some good examples. These should give you an overall feel for how modules are laid out and written. =item Check it's new There are a lot of modules on CPAN, and it's easy to miss one that's similar to what you're planning on contributing. Have a good plough through L<http://metacpan.org> and make sure you're not the one reinventing the wheel! =item Discuss the need You might love it. You might feel that everyone else needs it. But there might not actually be any real demand for it out there. If you're unsure about the demand your module will have, consider asking the C<module-authors@perl.org> mailing list (send an email to C<module-authors-subscribe@perl.org> to subscribe; see L<https://lists.perl.org/list/module-authors.html> for more information and a link to the archives). =item Choose a name Perl modules included on CPAN have a naming hierarchy you should try to fit in with. See L<perlmodlib> for more details on how this works, and browse around CPAN and the modules list to get a feel of it. At the very least, remember this: modules should be title capitalised, (This::Thing) fit in with a category, and explain their purpose succinctly. =item Check again While you're doing that, make really sure you haven't missed a module similar to the one you're about to write. When you've got your name sorted out and you're sure that your module is wanted and not currently available, it's time to start coding. =back =head2 Step-by-step: Making the module =over 3 =item Start with F<module-starter> or F<h2xs> The F<module-starter> utility is distributed as part of the L<Module::Starter|Module::Starter> CPAN package. It creates a directory with stubs of all the necessary files to start a new module, according to recent "best practice" for module development, and is invoked from the command line, thus: module-starter --module=Foo::Bar \ --author="Your Name" --email=yourname@cpan.org If you do not wish to install the L<Module::Starter|Module::Starter> package from CPAN, F<h2xs> is an older tool, originally intended for the development of XS modules, which comes packaged with the Perl distribution. A typical invocation of L<h2xs|h2xs> for a pure Perl module is: h2xs -AX --skip-exporter --use-new-tests -n Foo::Bar The C<-A> omits the Autoloader code, C<-X> omits XS elements, C<--skip-exporter> omits the Exporter code, C<--use-new-tests> sets up a modern testing environment, and C<-n> specifies the name of the module. =item Use L<strict|strict> and L<warnings|warnings> A module's code has to be warning and strict-clean, since you can't guarantee the conditions that it'll be used under. Besides, you wouldn't want to distribute code that wasn't warning or strict-clean anyway, right? =item Use L<Carp|Carp> The L<Carp|Carp> module allows you to present your error messages from the caller's perspective; this gives you a way to signal a problem with the caller and not your module. For instance, if you say this: warn "No hostname given"; the user will see something like this: No hostname given at /usr/local/lib/perl5/site_perl/5.6.0/Net/Acme.pm line 123. which looks like your module is doing something wrong. Instead, you want to put the blame on the user, and say this: No hostname given at bad_code, line 10. You do this by using L<Carp|Carp> and replacing your C<warn>s with C<carp>s. If you need to C<die>, say C<croak> instead. However, keep C<warn> and C<die> in place for your sanity checks - where it really is your module at fault. =item Use L<Exporter|Exporter> - wisely! L<Exporter|Exporter> gives you a standard way of exporting symbols and subroutines from your module into the caller's namespace. For instance, saying C<use Net::Acme qw(&frob)> would import the C<frob> subroutine. The package variable C<@EXPORT> will determine which symbols will get exported when the caller simply says C<use Net::Acme> - you will hardly ever want to put anything in there. C<@EXPORT_OK>, on the other hand, specifies which symbols you're willing to export. If you do want to export a bunch of symbols, use the C<%EXPORT_TAGS> and define a standard export set - look at L<Exporter> for more details. =item Use L<plain old documentation|perlpod> The work isn't over until the paperwork is done, and you're going to need to put in some time writing some documentation for your module. C<module-starter> or C<h2xs> will provide a stub for you to fill in; if you're not sure about the format, look at L<perlpod> for an introduction. Provide a good synopsis of how your module is used in code, a description, and then notes on the syntax and function of the individual subroutines or methods. Use Perl comments for developer notes and POD for end-user notes. =item Write tests You're encouraged to create self-tests for your module to ensure it's working as intended on the myriad platforms Perl supports; if you upload your module to CPAN, a host of testers will build your module and send you the results of the tests. Again, C<module-starter> and C<h2xs> provide a test framework which you can extend - you should do something more than just checking your module will compile. L<Test::Simple|Test::Simple> and L<Test::More|Test::More> are good places to start when writing a test suite. =item Write the F<README> If you're uploading to CPAN, the automated gremlins will extract the README file and place that in your CPAN directory. It'll also appear in the main F<by-module> and F<by-category> directories if you make it onto the modules list. It's a good idea to put here what the module actually does in detail. =item Write F<Changes> Add any user-visible changes since the last release to your F<Changes> file. =back =head2 Step-by-step: Distributing your module =over 3 =item Get a CPAN user ID Every developer publishing modules on CPAN needs a CPAN ID. Visit C<L<http://pause.perl.org/>>, select "Request PAUSE Account", and wait for your request to be approved by the PAUSE administrators. =item C<perl Makefile.PL; make test; make distcheck; make dist> Once again, C<module-starter> or C<h2xs> has done all the work for you. They produce the standard C<Makefile.PL> you see when you download and install modules, and this produces a Makefile with a C<dist> target. Once you've ensured that your module passes its own tests - always a good thing to make sure - you can C<make distcheck> to make sure everything looks OK, followed by C<make dist>, and the Makefile will hopefully produce you a nice tarball of your module, ready for upload. =item Upload the tarball The email you got when you received your CPAN ID will tell you how to log in to PAUSE, the Perl Authors Upload SErver. From the menus there, you can upload your module to CPAN. Alternatively you can use the F<cpan-upload> script, part of the L<CPAN::Uploader> distribution on CPAN. =item Fix bugs! Once you start accumulating users, they'll send you bug reports. If you're lucky, they'll even send you patches. Welcome to the joys of maintaining a software project... =back =head1 AUTHOR Simon Cozens, C<simon@cpan.org> Updated by Kirrily "Skud" Robert, C<skud@cpan.org> =head1 SEE ALSO L<perlmod>, L<perlmodlib>, L<perlmodinstall>, L<h2xs>, L<strict>, L<Carp>, L<Exporter>, L<perlpod>, L<Test::Simple>, L<Test::More> L<ExtUtils::MakeMaker>, L<Module::Build>, L<Module::Starter> L<http://www.cpan.org/>, Ken Williams' tutorial on building your own module at L<http://mathforum.org/~ken/perl_modules.html> perl588delta.pod 0000644 00000061301 15125556335 0007504 0 ustar 00 =encoding utf8 =head1 NAME perl588delta - what is new for perl v5.8.8 =head1 DESCRIPTION This document describes differences between the 5.8.7 release and the 5.8.8 release. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.8.7. If any exist, they are bugs and reports are welcome. =head1 Core Enhancements =over =item * C<chdir>, C<chmod> and C<chown> can now work on filehandles as well as filenames, if the system supports respectively C<fchdir>, C<fchmod> and C<fchown>, thanks to a patch provided by Gisle Aas. =back =head1 Modules and Pragmata =over =item * C<Attribute::Handlers> upgraded to version 0.78_02 =over =item * Documentation typo fix =back =item * C<attrs> upgraded to version 1.02 =over =item * Internal cleanup only =back =item * C<autouse> upgraded to version 1.05 =over =item * Simplified implementation =back =item * C<B> upgraded to version 1.09_01 =over =item * The inheritance hierarchy of the C<B::> modules has been corrected; C<B::NV> now inherits from C<B::SV> (instead of C<B::IV>). =back =item * C<blib> upgraded to version 1.03 =over =item * Documentation typo fix =back =item * C<ByteLoader> upgraded to version 0.06 =over =item * Internal cleanup =back =item * C<CGI> upgraded to version 3.15 =over =item * Extraneous "?" from C<self_url()> removed =item * C<scrolling_list()> select attribute fixed =item * C<virtual_port> now works properly with the https protocol =item * C<upload_hook()> and C<append()> now works in function-oriented mode =item * C<POST_MAX> doesn't cause the client to hang any more =item * Automatic tab indexes are now disabled and new C<-tabindex> pragma has been added to turn automatic indexes back on =item * C<end_form()> doesn't emit empty (and non-validating) C<< <div> >> =item * C<CGI::Carp> works better in certain mod_perl configurations =item * Setting C<$CGI::TMPDIRECTORY> is now effective =item * Enhanced documentation =back =item * C<charnames> upgraded to version 1.05 =over =item * C<viacode()> now accept hex strings and has been optimized. =back =item * C<CPAN> upgraded to version 1.76_02 =over =item * 1 minor bug fix for Win32 =back =item * C<Cwd> upgraded to version 3.12 =over =item * C<canonpath()> on Win32 now collapses F<foo\..> sections correctly. =item * Improved behaviour on Symbian OS. =item * Enhanced documentation and typo fixes =item * Internal cleanup =back =item * C<Data::Dumper> upgraded to version 2.121_08 =over =item * A problem where C<Data::Dumper> would sometimes update the iterator state of hashes has been fixed =item * Numeric labels now work =item * Internal cleanup =back =item * C<DB> upgraded to version 1.01 =over =item * A problem where the state of the regexp engine would sometimes get clobbered when running under the debugger has been fixed. =back =item * C<DB_File> upgraded to version 1.814 =over =item * Adds support for Berkeley DB 4.4. =back =item * C<Devel::DProf> upgraded to version 20050603.00 =over =item * Internal cleanup =back =item * C<Devel::Peek> upgraded to version 1.03 =over =item * Internal cleanup =back =item * C<Devel::PPPort> upgraded to version 3.06_01 =over =item * C<--compat-version> argument checking has been improved =item * Files passed on the command line are filtered by default =item * C<--nofilter> option to override the filtering has been added =item * Enhanced documentation =back =item * C<diagnostics> upgraded to version 1.15 =over =item * Documentation typo fix =back =item * C<Digest> upgraded to version 1.14 =over =item * The constructor now knows which module implements SHA-224 =item * Documentation tweaks and typo fixes =back =item * C<Digest::MD5> upgraded to version 2.36 =over =item * C<XSLoader> is now used for faster loading =item * Enhanced documentation including MD5 weaknesses discovered lately =back =item * C<Dumpvalue> upgraded to version 1.12 =over =item * Documentation fix =back =item * C<DynaLoader> upgraded but unfortunately we're not able to increment its version number :-( =over =item * Implements C<dl_unload_file> on Win32 =item * Internal cleanup =item * C<XSLoader> 0.06 incorporated; small optimisation for calling C<bootstrap_inherit()> and documentation enhancements. =back =item * C<Encode> upgraded to version 2.12 =over =item * A coderef is now acceptable for C<CHECK>! =item * 3 new characters added to the ISO-8859-7 encoding =item * New encoding C<MIME-Header-ISO_2022_JP> added =item * Problem with partial characters and C<< encoding(utf-8-strict) >> fixed. =item * Documentation enhancements and typo fixes =back =item * C<English> upgraded to version 1.02 =over =item * the C<< $COMPILING >> variable has been added =back =item * C<ExtUtils::Constant> upgraded to version 0.17 =over =item * Improved compatibility with older versions of perl =back =item * C<ExtUtils::MakeMaker> upgraded to version 6.30 (was 6.17) =over =item * Too much to list here; see L<http://search.cpan.org/dist/ExtUtils-MakeMaker/Changes> =back =item * C<File::Basename> upgraded to version 2.74, with changes contributed by Michael Schwern. =over =item * Documentation clarified and errors corrected. =item * C<basename> now strips trailing path separators before processing the name. =item * C<basename> now returns C</> for parameter C</>, to make C<basename> consistent with the shell utility of the same name. =item * The suffix is no longer stripped if it is identical to the remaining characters in the name, again for consistency with the shell utility. =item * Some internal code cleanup. =back =item * C<File::Copy> upgraded to version 2.09 =over =item * Copying a file onto itself used to fail. =item * Moving a file between file systems now preserves the access and modification time stamps =back =item * C<File::Find> upgraded to version 1.10 =over =item * Win32 portability fixes =item * Enhanced documentation =back =item * C<File::Glob> upgraded to version 1.05 =over =item * Internal cleanup =back =item * C<File::Path> upgraded to version 1.08 =over =item * C<mkpath> now preserves C<errno> when C<mkdir> fails =back =item * C<File::Spec> upgraded to version 3.12 =over =item * C<< File::Spec->rootdir() >> now returns C<\> on Win32, instead of C</> =item * C<$^O> could sometimes become tainted. This has been fixed. =item * C<canonpath> on Win32 now collapses C<foo/..> (or C<foo\..>) sections correctly, rather than doing the "misguided" work it was previously doing. Note that C<canonpath> on Unix still does B<not> collapse these sections, as doing so would be incorrect. =item * Some documentation improvements =item * Some internal code cleanup =back =item * C<FileCache> upgraded to version 1.06 =over =item * POD formatting errors in the documentation fixed =back =item * C<Filter::Simple> upgraded to version 0.82 =item * C<FindBin> upgraded to version 1.47 =over =item * Now works better with directories where access rights are more restrictive than usual. =back =item * C<GDBM_File> upgraded to version 1.08 =over =item * Internal cleanup =back =item * C<Getopt::Long> upgraded to version 2.35 =over =item * C<prefix_pattern> has now been complemented by a new configuration option C<long_prefix_pattern> that allows the user to specify what prefix patterns should have long option style semantics applied. =item * Options can now take multiple values at once (experimental) =item * Various bug fixes =back =item * C<if> upgraded to version 0.05 =over =item * Give more meaningful error messages from C<if> when invoked with a condition in list context. =item * Restore backwards compatibility with earlier versions of perl =back =item * C<IO> upgraded to version 1.22 =over =item * Enhanced documentation =item * Internal cleanup =back =item * C<IPC::Open2> upgraded to version 1.02 =over =item * Enhanced documentation =back =item * C<IPC::Open3> upgraded to version 1.02 =over =item * Enhanced documentation =back =item * C<List::Util> upgraded to version 1.18 (was 1.14) =over =item * Fix pure-perl version of C<refaddr> to avoid blessing an un-blessed reference =item * Use C<XSLoader> for faster loading =item * Fixed various memory leaks =item * Internal cleanup and portability fixes =back =item * C<Math::Complex> upgraded to version 1.35 =over =item * C<atan2(0, i)> now works, as do all the (computable) complex argument cases =item * Fixes for certain bugs in C<make> and C<emake> =item * Support returning the I<k>th root directly =item * Support C<[2,-3pi/8]> in C<emake> =item * Support C<inf> for C<make>/C<emake> =item * Document C<make>/C<emake> more visibly =back =item * C<Math::Trig> upgraded to version 1.03 =over =item * Add more great circle routines: C<great_circle_waypoint> and C<great_circle_destination> =back =item * C<MIME::Base64> upgraded to version 3.07 =over =item * Use C<XSLoader> for faster loading =item * Enhanced documentation =item * Internal cleanup =back =item * C<NDBM_File> upgraded to version 1.06 =over =item * Enhanced documentation =back =item * C<ODBM_File> upgraded to version 1.06 =over =item * Documentation typo fixed =item * Internal cleanup =back =item * C<Opcode> upgraded to version 1.06 =over =item * Enhanced documentation =item * Internal cleanup =back =item * C<open> upgraded to version 1.05 =over =item * Enhanced documentation =back =item * C<overload> upgraded to version 1.04 =over =item * Enhanced documentation =back =item * C<PerlIO> upgraded to version 1.04 =over =item * C<PerlIO::via> iterate over layers properly now =item * C<PerlIO::scalar> understands C<< $/ = "" >> now =item * C<encoding(utf-8-strict)> with partial characters now works =item * Enhanced documentation =item * Internal cleanup =back =item * C<Pod::Functions> upgraded to version 1.03 =over =item * Documentation typos fixed =back =item * C<Pod::Html> upgraded to version 1.0504 =over =item * HTML output will now correctly link to C<=item>s on the same page, and should be valid XHTML. =item * Variable names are recognized as intended =item * Documentation typos fixed =back =item * C<Pod::Parser> upgraded to version 1.32 =over =item * Allow files that start with C<=head> on the first line =item * Win32 portability fix =item * Exit status of C<pod2usage> fixed =item * New C<-noperldoc> switch for C<pod2usage> =item * Arbitrary URL schemes now allowed =item * Documentation typos fixed =back =item * C<POSIX> upgraded to version 1.09 =over =item * Documentation typos fixed =item * Internal cleanup =back =item * C<re> upgraded to version 0.05 =over =item * Documentation typo fixed =back =item * C<Safe> upgraded to version 2.12 =over =item * Minor documentation enhancement =back =item * C<SDBM_File> upgraded to version 1.05 =over =item * Documentation typo fixed =item * Internal cleanup =back =item * C<Socket> upgraded to version 1.78 =over =item * Internal cleanup =back =item * C<Storable> upgraded to version 2.15 =over =item * This includes the C<STORABLE_attach> hook functionality added by Adam Kennedy, and more frugal memory requirements when storing under C<ithreads>, by using the C<ithreads> cloning tracking code. =back =item * C<Switch> upgraded to version 2.10_01 =over =item * Documentation typos fixed =back =item * C<Sys::Syslog> upgraded to version 0.13 =over =item * Now provides numeric macros and meaningful C<Exporter> tags. =item * No longer uses C<Sys::Hostname> as it may provide useless values in unconfigured network environments, so instead uses C<INADDR_LOOPBACK> directly. =item * C<syslog()> now uses local timestamp. =item * C<setlogmask()> now behaves like its C counterpart. =item * C<setlogsock()> will now C<croak()> as documented. =item * Improved error and warnings messages. =item * Improved documentation. =back =item * C<Term::ANSIColor> upgraded to version 1.10 =over =item * Fixes a bug in C<colored> when C<$EACHLINE> is set that caused it to not color lines consisting solely of 0 (literal zero). =item * Improved tests. =back =item * C<Term::ReadLine> upgraded to version 1.02 =over =item * Documentation tweaks =back =item * C<Test::Harness> upgraded to version 2.56 (was 2.48) =over =item * The C<Test::Harness> timer is now off by default. =item * Now shows elapsed time in milliseconds. =item * Various bug fixes =back =item * C<Test::Simple> upgraded to version 0.62 (was 0.54) =over =item * C<is_deeply()> no longer fails to work for many cases =item * Various minor bug fixes =item * Documentation enhancements =back =item * C<Text::Tabs> upgraded to version 2005.0824 =over =item * Provides a faster implementation of C<expand> =back =item * C<Text::Wrap> upgraded to version 2005.082401 =over =item * Adds C<$Text::Wrap::separator2>, which allows you to preserve existing newlines but add line-breaks with some other string. =back =item * C<threads> upgraded to version 1.07 =over =item * C<threads> will now honour C<no warnings 'threads'> =item * A thread's interpreter is now freed after C<< $t->join() >> rather than after C<undef $t>, which should fix some C<ithreads> memory leaks. (Fixed by Dave Mitchell) =item * Some documentation typo fixes. =back =item * C<threads::shared> upgraded to version 0.94 =over =item * Documentation changes only =item * Note: An improved implementation of C<threads::shared> is available on CPAN - this will be merged into 5.8.9 if it proves stable. =back =item * C<Tie::Hash> upgraded to version 1.02 =over =item * Documentation typo fixed =back =item * C<Time::HiRes> upgraded to version 1.86 (was 1.66) =over =item * C<clock_nanosleep()> and C<clock()> functions added =item * Support for the POSIX C<clock_gettime()> and C<clock_getres()> has been added =item * Return C<undef> or an empty list if the C C<gettimeofday()> function fails =item * Improved C<nanosleep> detection =item * Internal cleanup =item * Enhanced documentation =back =item * C<Unicode::Collate> upgraded to version 0.52 =over =item * Now implements UCA Revision 14 (based on Unicode 4.1.0). =item * C<< Unicode::Collate->new >> method no longer overwrites user's C<$_> =item * Enhanced documentation =back =item * C<Unicode::UCD> upgraded to version 0.24 =over =item * Documentation typos fixed =back =item * C<User::grent> upgraded to version 1.01 =over =item * Documentation typo fixed =back =item * C<utf8> upgraded to version 1.06 =over =item * Documentation typos fixed =back =item * C<vmsish> upgraded to version 1.02 =over =item * Documentation typos fixed =back =item * C<warnings> upgraded to version 1.05 =over =item * Gentler messing with C<Carp::> internals =item * Internal cleanup =item * Documentation update =back =item * C<Win32> upgraded to version 0.2601 =for cynics And how many perl 5.8.x versions can I release ahead of Vista? =over =item * Provides Windows Vista support to C<Win32::GetOSName> =item * Documentation enhancements =back =item * C<XS::Typemap> upgraded to version 0.02 =over =item * Internal cleanup =back =back =head1 Utility Changes =head2 C<h2xs> enhancements C<h2xs> implements new option C<--use-xsloader> to force use of C<XSLoader> even in backwards compatible modules. The handling of authors' names that had apostrophes has been fixed. Any enums with negative values are now skipped. =head2 C<perlivp> enhancements C<perlivp> implements new option C<-a> and will not check for F<*.ph> files by default any more. Use the C<-a> option to run I<all> tests. =head1 New Documentation The L<perlglossary> manpage is a glossary of terms used in the Perl documentation, technical and otherwise, kindly provided by O'Reilly Media, inc. =head1 Performance Enhancements =over 4 =item * Weak reference creation is now I<O(1)> rather than I<O(n)>, courtesy of Nicholas Clark. Weak reference deletion remains I<O(n)>, but if deletion only happens at program exit, it may be skipped completely. =item * Salvador Fandiño provided improvements to reduce the memory usage of C<sort> and to speed up some cases. =item * Jarkko Hietaniemi and Andy Lester worked to mark as much data as possible in the C source files as C<static>, to increase the proportion of the executable file that the operating system can share between process, and thus reduce real memory usage on multi-user systems. =back =head1 Installation and Configuration Improvements Parallel makes should work properly now, although there may still be problems if C<make test> is instructed to run in parallel. Building with Borland's compilers on Win32 should work more smoothly. In particular Steve Hay has worked to side step many warnings emitted by their compilers and at least one C compiler internal error. C<Configure> will now detect C<clearenv> and C<unsetenv>, thanks to a patch from Alan Burlison. It will also probe for C<futimes> and whether C<sprintf> correctly returns the length of the formatted string, which will both be used in perl 5.8.9. There are improved hints for next-3.0, vmesa, IX, Darwin, Solaris, Linux, DEC/OSF, HP-UX and MPE/iX Perl extensions on Windows now can be statically built into the Perl DLL, thanks to a work by Vadim Konovalov. (This improvement was actually in 5.8.7, but was accidentally omitted from L<perl587delta>). =head1 Selected Bug Fixes =head2 no warnings 'category' works correctly with -w Previously when running with warnings enabled globally via C<-w>, selective disabling of specific warning categories would actually turn off all warnings. This is now fixed; now C<no warnings 'io';> will only turn off warnings in the C<io> class. Previously it would erroneously turn off all warnings. This bug fix may cause some programs to start correctly issuing warnings. =head2 Remove over-optimisation Perl 5.8.4 introduced a change so that assignments of C<undef> to a scalar, or of an empty list to an array or a hash, were optimised away. As this could cause problems when C<goto> jumps were involved, this change has been backed out. =head2 sprintf() fixes Using the sprintf() function with some formats could lead to a buffer overflow in some specific cases. This has been fixed, along with several other bugs, notably in bounds checking. In related fixes, it was possible for badly written code that did not follow the documentation of C<Sys::Syslog> to have formatting vulnerabilities. C<Sys::Syslog> has been changed to protect people from poor quality third party code. =head2 Debugger and Unicode slowdown It had been reported that running under perl's debugger when processing Unicode data could cause unexpectedly large slowdowns. The most likely cause of this was identified and fixed by Nicholas Clark. =head2 Smaller fixes =over 4 =item * C<FindBin> now works better with directories where access rights are more restrictive than usual. =item * Several memory leaks in ithreads were closed. An improved implementation of C<threads::shared> is available on CPAN - this will be merged into 5.8.9 if it proves stable. =item * Trailing spaces are now trimmed from C<$!> and C<$^E>. =item * Operations that require perl to read a process's list of groups, such as reads of C<$(> and C<$)>, now dynamically allocate memory rather than using a fixed sized array. The fixed size array could cause C stack exhaustion on systems configured to use large numbers of groups. =item * C<PerlIO::scalar> now works better with non-default C<$/> settings. =item * You can now use the C<x> operator to repeat a C<qw//> list. This used to raise a syntax error. =item * The debugger now traces correctly execution in eval("")uated code that contains #line directives. =item * The value of the C<open> pragma is no longer ignored for three-argument opens. =item * The optimisation of C<for (reverse @a)> introduced in perl 5.8.6 could misbehave when the array had undefined elements and was used in LVALUE context. Dave Mitchell provided a fix. =item * Some case insensitive matches between UTF-8 encoded data and 8 bit regexps, and vice versa, could give malformed character warnings. These have been fixed by Dave Mitchell and Yves Orton. =item * C<lcfirst> and C<ucfirst> could corrupt the string for certain cases where the length UTF-8 encoding of the string in lower case, upper case or title case differed. This was fixed by Nicholas Clark. =item * Perl will now use the C library calls C<unsetenv> and C<clearenv> if present to delete keys from C<%ENV> and delete C<%ENV> entirely, thanks to a patch from Alan Burlison. =back =head1 New or Changed Diagnostics =head2 Attempt to set length of freed array This is a new warning, produced in situations such as this: $r = do {my @a; \$#a}; $$r = 503; =head2 Non-string passed as bitmask This is a new warning, produced when number has been passed as an argument to select(), instead of a bitmask. # Wrong, will now warn $rin = fileno(STDIN); ($nfound,$timeleft) = select($rout=$rin, undef, undef, $timeout); # Should be $rin = ''; vec($rin,fileno(STDIN),1) = 1; ($nfound,$timeleft) = select($rout=$rin, undef, undef, $timeout); =head2 Search pattern not terminated or ternary operator parsed as search pattern This syntax error indicates that the lexer couldn't find the final delimiter of a C<?PATTERN?> construct. Mentioning the ternary operator in this error message makes it easier to diagnose syntax errors. =head1 Changed Internals There has been a fair amount of refactoring of the C<C> source code, partly to make it tidier and more maintainable. The resulting object code and the C<perl> binary may well be smaller than 5.8.7, in particular due to a change contributed by Dave Mitchell which reworked the warnings code to be significantly smaller. Apart from being smaller and possibly faster, there should be no user-detectable changes. Andy Lester supplied many improvements to determine which function parameters and local variables could actually be declared C<const> to the C compiler. Steve Peters provided new C<*_set> macros and reworked the core to use these rather than assigning to macros in LVALUE context. Dave Mitchell improved the lexer debugging output under C<-DT> Nicholas Clark changed the string buffer allocation so that it is now rounded up to the next multiple of 4 (or 8 on platforms with 64 bit pointers). This should reduce the number of calls to C<realloc> without actually using any extra memory. The C<HV>'s array of C<HE*>s is now allocated at the correct (minimal) size, thanks to another change by Nicholas Clark. Compile with C<-DPERL_USE_LARGE_HV_ALLOC> to use the old, sloppier, default. For XS or embedding debugging purposes, if perl is compiled with C<-DDEBUG_LEAKING_SCALARS_FORK_DUMP> in addition to C<-DDEBUG_LEAKING_SCALARS> then a child process is C<fork>ed just before global destruction, which is used to display the values of any scalars found to have leaked at the end of global destruction. Without this, the scalars have already been freed sufficiently at the point of detection that it is impossible to produce any meaningful dump of their contents. This feature was implemented by the indefatigable Nicholas Clark, based on an idea by Mike Giroux. =head1 Platform Specific Problems The optimiser on HP-UX 11.23 (Itanium 2) is currently partly disabled (scaled down to +O1) when using HP C-ANSI-C; the cause of problems at higher optimisation levels is still unclear. There are a handful of remaining test failures on VMS, mostly due to test fixes and minor module tweaks with too many dependencies to integrate into this release from the development stream, where they have all been corrected. The following is a list of expected failures with the patch number of the fix where that is known: ext/Devel/PPPort/t/ppphtest.t #26913 ext/List/Util/t/p_tainted.t #26912 lib/ExtUtils/t/PL_FILES.t #26813 lib/ExtUtils/t/basic.t #26813 t/io/fs.t t/op/cmp.t =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://bugs.perl.org. There may also be information at http://www.perl.org, the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. You can browse and search the Perl 5 bugs at http://bugs.perl.org/ =head1 SEE ALSO The F<Changes> file for exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl5122delta.pod 0000644 00000022603 15125556335 0007553 0 ustar 00 =encoding utf8 =head1 NAME perl5122delta - what is new for perl v5.12.2 =head1 DESCRIPTION This document describes differences between the 5.12.1 release and the 5.12.2 release. If you are upgrading from an earlier major version, such as 5.10.1, first read L<perl5120delta>, which describes differences between 5.10.1 and 5.12.0, as well as L<perl5121delta>, which describes earlier changes in the 5.12 stable release series. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.12.1. If any exist, they are bugs and reports are welcome. =head1 Core Enhancements Other than the bug fixes listed below, there should be no user-visible changes to the core language in this release. =head1 Modules and Pragmata =head2 New Modules and Pragmata This release does not introduce any new modules or pragmata. =head2 Pragmata Changes In the previous release, C<no I<VERSION>;> statements triggered a bug which could cause L<feature> bundles to be loaded and L<strict> mode to be enabled unintentionally. =head2 Updated Modules =over 4 =item C<Carp> Upgraded from version 1.16 to 1.17. L<Carp> now detects incomplete L<caller()|perlfunc/"caller EXPR"> overrides and avoids using bogus C<@DB::args>. To provide backtraces, Carp relies on particular behaviour of the caller built-in. Carp now detects if other code has overridden this with an incomplete implementation, and modifies its backtrace accordingly. Previously incomplete overrides would cause incorrect values in backtraces (best case), or obscure fatal errors (worst case) This fixes certain cases of C<Bizarre copy of ARRAY> caused by modules overriding C<caller()> incorrectly. =item C<CPANPLUS> A patch to F<cpanp-run-perl> has been backported from CPANPLUS C<0.9004>. This resolves L<RT #55964|http://rt.cpan.org/Public/Bug/Display.html?id=55964> and L<RT #57106|http://rt.cpan.org/Public/Bug/Display.html?id=57106>, both of which related to failures to install distributions that use C<Module::Install::DSL>. =item C<File::Glob> A regression which caused a failure to find C<CORE::GLOBAL::glob> after loading C<File::Glob> to crash has been fixed. Now, it correctly falls back to external globbing via C<pp_glob>. =item C<File::Copy> C<File::Copy::copy(FILE, DIR)> is now documented. =item C<File::Spec> Upgraded from version 3.31 to 3.31_01. Several portability fixes were made in C<File::Spec::VMS>: a colon is now recognized as a delimiter in native filespecs; caret-escaped delimiters are recognized for better handling of extended filespecs; C<catpath()> returns an empty directory rather than the current directory if the input directory name is empty; C<abs2rel()> properly handles Unix-style input. =back =head1 Utility Changes =over =item * F<perlbug> now always gives the reporter a chance to change the email address it guesses for them. =item * F<perlbug> should no longer warn about uninitialized values when using the C<-d> and C<-v> options. =back =head1 Changes to Existing Documentation =over =item * The existing policy on backward-compatibility and deprecation has been added to L<perlpolicy>, along with definitions of terms like I<deprecation>. =item * L<perlfunc/srand>'s usage has been clarified. =item * The entry for L<perlfunc/die> was reorganized to emphasize its role in the exception mechanism. =item * Perl's L<INSTALL> file has been clarified to explicitly state that Perl requires a C89 compliant ANSI C Compiler. =item * L<IO::Socket>'s C<getsockopt()> and C<setsockopt()> have been documented. =item * F<alarm()>'s inability to interrupt blocking IO on Windows has been documented. =item * L<Math::TrulyRandom> hasn't been updated since 1996 and has been removed as a recommended solution for random number generation. =item * L<perlrun> has been updated to clarify the behaviour of octal flags to F<perl>. =item * To ease user confusion, C<$#> and C<$*>, two special variables that were removed in earlier versions of Perl have been documented. =item * The version of L<perlfaq> shipped with the Perl core has been updated from the official FAQ version, which is now maintained in the C<briandfoy/perlfaq> branch of the Perl repository at L<git://perl5.git.perl.org/perl.git>. =back =head1 Installation and Configuration Improvements =head2 Configuration improvements =over =item * The C<d_u32align> configuration probe on ARM has been fixed. =back =head2 Compilation improvements =over =item * An "C<incompatible operand types>" error in ternary expressions when building with C<clang> has been fixed. =item * Perl now skips setuid C<File::Copy> tests on partitions it detects to be mounted as C<nosuid>. =back =head1 Selected Bug Fixes =over 4 =item * A possible segfault in the C<T_PRTOBJ> default typemap has been fixed. =item * A possible memory leak when using L<caller()|perlfunc/"caller EXPR"> to set C<@DB::args> has been fixed. =item * Several memory leaks when loading XS modules were fixed. =item * C<unpack()> now handles scalar context correctly for C<%32H> and C<%32u>, fixing a potential crash. C<split()> would crash because the third item on the stack wasn't the regular expression it expected. C<unpack("%2H", ...)> would return both the unpacked result and the checksum on the stack, as would C<unpack("%2u", ...)>. L<[perl #73814]|http://rt.perl.org/rt3/Ticket/Display.html?id=73814> =item * Perl now avoids using memory after calling C<free()> in F<pp_require> when there are CODEREFs in C<@INC>. =item * A bug that could cause "C<Unknown error>" messages when "C<call_sv(code, G_EVAL)>" is called from an XS destructor has been fixed. =item * The implementation of the C<open $fh, 'E<gt>' \$buffer> feature now supports get/set magic and thus tied buffers correctly. =item * The C<pp_getc>, C<pp_tell>, and C<pp_eof> opcodes now make room on the stack for their return values in cases where no argument was passed in. =item * When matching unicode strings under some conditions inappropriate backtracking would result in a C<Malformed UTF-8 character (fatal)> error. This should no longer occur. See L<[perl #75680]|http://rt.perl.org/rt3/Public/Bug/Display.html?id=75680> =back =head1 Platform Specific Notes =head2 AIX =over =item * F<README.aix> has been updated with information about the XL C/C++ V11 compiler suite. =back =head2 Windows =over =item * When building Perl with the mingw64 x64 cross-compiler C<incpath>, C<libpth>, C<ldflags>, C<lddlflags> and C<ldflags_nolargefiles> values in F<Config.pm> and F<Config_heavy.pl> were not previously being set correctly because, with that compiler, the include and lib directories are not immediately below C<$(CCHOME)>. =back =head2 VMS =over =item * F<git_version.h> is now installed on VMS. This was an oversight in v5.12.0 which caused some extensions to fail to build. =item * Several memory leaks in L<stat()|perlfunc/"stat FILEHANDLE"> have been fixed. =item * A memory leak in C<Perl_rename()> due to a double allocation has been fixed. =item * A memory leak in C<vms_fid_to_name()> (used by C<realpath()> and C<realname()>) has been fixed. =back =head1 Acknowledgements Perl 5.12.2 represents approximately three months of development since Perl 5.12.1 and contains approximately 2,000 lines of changes across 100 files from 36 authors. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.12.2: Abigail, Ævar Arnfjörð Bjarmason, Ben Morrow, brian d foy, Brian Phillips, Chas. Owens, Chris 'BinGOs' Williams, Chris Williams, Craig A. Berry, Curtis Jewell, Dan Dascalescu, David Golden, David Mitchell, Father Chrysostomos, Florian Ragwitz, George Greer, H.Merijn Brand, Jan Dubois, Jesse Vincent, Jim Cromie, Karl Williamson, Lars Dɪᴇᴄᴋᴏᴡ 迪拉斯, Leon Brocard, Maik Hentsche, Matt S Trout, Nicholas Clark, Rafael Garcia-Suarez, Rainer Tammer, Ricardo Signes, Salvador Ortiz Garcia, Sisyphus, Slaven Rezic, Steffen Mueller, Tony Cook, Vincent Pit and Yves Orton. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlandroid.pod 0000644 00000020036 15125556335 0007566 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specially designed to be readable as is. =head1 NAME perlandroid - Perl under Android =head1 SYNOPSIS The first portions of this document contains instructions to cross-compile Perl for Android 2.0 and later, using the binaries provided by Google. The latter portions describe how to build perl native using one of the toolchains available on the Play Store. =head1 DESCRIPTION This document describes how to set up your host environment when attempting to build Perl for Android. =head1 Cross-compilation These instructions assume an Unixish build environment on your host system; they've been tested on Linux and OS X, and may work on Cygwin and MSYS. While Google also provides an NDK for Windows, these steps won't work native there, although it may be possible to cross-compile through different means. If your host system's architecture is 32 bits, remember to change the C<x86_64>'s below to C<x86>'s. On a similar vein, the examples below use the 4.8 toolchain; if you want to use something older or newer (for example, the 4.4.3 toolchain included in the 8th revision of the NDK), just change those to the relevant version. =head2 Get the Android Native Development Kit (NDK) You can download the NDK from L<https://developer.android.com/tools/sdk/ndk/index.html>. You'll want the normal, non-legacy version. =head2 Determine the architecture you'll be cross-compiling for There's three possible options: arm-linux-androideabi for ARM, mipsel-linux-android for MIPS, and simply x86 for x86. As of 2014, most Android devices run on ARM, so that is generally a safe bet. With those two in hand, you should add $ANDROID_NDK/toolchains/$TARGETARCH-4.8/prebuilt/`uname | tr '[A-Z]' '[a-z]'`-x86_64/bin to your C<PATH>, where C<$ANDROID_NDK> is the location where you unpacked the NDK, and C<$TARGETARCH> is your target's architecture. =head2 Set up a standalone toolchain This creates a working sysroot that we can feed to Configure later. $ export ANDROID_TOOLCHAIN=/tmp/my-toolchain-$TARGETARCH $ export SYSROOT=$ANDROID_TOOLCHAIN/sysroot $ $ANDROID_NDK/build/tools/make-standalone-toolchain.sh \ --platform=android-9 \ --install-dir=$ANDROID_TOOLCHAIN \ --system=`uname | tr '[A-Z]' '[a-z]'`-x86_64 \ --toolchain=$TARGETARCH-4.8 =head2 adb or ssh? adb is the Android Debug Bridge. For our purposes, it's basically a way of establishing an ssh connection to an Android device without having to install anything on the device itself, as long as the device is either on the same local network as the host, or it is connected to the host through USB. Perl can be cross-compiled using either adb or a normal ssh connection; in general, if you can connect your device to the host using a USB port, or if you don't feel like installing an sshd app on your device, you may want to use adb, although you may be forced to switch to ssh if your device is not rooted and you're unlucky -- more on that later. Alternatively, if you're cross-compiling to an emulator, you'll have to use adb. =head3 adb To use adb, download the Android SDK from L<https://developer.android.com/sdk/index.html>. The "SDK Tools Only" version should suffice -- if you downloaded the ADT Bundle, you can find the sdk under F<$ADT_BUNDLE/sdk/>. Add F<$ANDROID_SDK/platform-tools> to your C<PATH>, which should give you access to adb. You'll now have to find your device's name using C<adb devices>, and later pass that to Configure through C<-Dtargethost=$DEVICE>. However, before calling Configure, you need to check if using adb is a viable choice in the first place. Because Android doesn't have a F</tmp>, nor does it allow executables in the sdcard, we need to find somewhere in the device for Configure to put some files in, as well as for the tests to run in. If your device is rooted, then you're good. Try running these: $ export TARGETDIR=/mnt/asec/perl $ adb -s $DEVICE shell "echo sh -c '\"mkdir $TARGETDIR\"' | su --" Which will create the directory we need, and you can move on to the next step. F</mnt/asec> is mounted as a tmpfs in Android, but it's only accessible to root. If your device is not rooted, you may still be in luck. Try running this: $ export TARGETDIR=/data/local/tmp/perl $ adb -s $DEVICE shell "mkdir $TARGETDIR" If the command works, you can move to the next step, but beware: B<You'll have to remove the directory from the device once you are done! Unlike F</mnt/asec>, F</data/local/tmp> may not get automatically garbage collected once you shut off the phone>. If neither of those work, then you can't use adb to cross-compile to your device. Either try rooting it, or go for the ssh route. =head3 ssh To use ssh, you'll need to install and run a sshd app and set it up properly. There are several paid and free apps that do this rather easily, so you should be able to spot one on the store. Remember that Perl requires a passwordless connection, so set up a public key. Note that several apps spew crap to stderr every time you connect, which can throw off Configure. You may need to monkeypatch the part of Configure that creates C<run-ssh> to have it discard stderr. Since you're using ssh, you'll have to pass some extra arguments to Configure: -Dtargetrun=ssh -Dtargethost=$TARGETHOST -Dtargetuser=$TARGETUSER -Dtargetport=$TARGETPORT =head2 Configure and beyond With all of the previous done, you're now ready to call Configure. If using adb, a "basic" Configure line will look like this: $ ./Configure -des -Dusedevel -Dusecrosscompile -Dtargetrun=adb \ -Dcc=$TARGETARCH-gcc \ -Dsysroot=$SYSROOT \ -Dtargetdir=$TARGETDIR \ -Dtargethost=$DEVICE If using ssh, it's not too different -- we just change targetrun to ssh, and pass in targetuser and targetport. It ends up looking like this: $ ./Configure -des -Dusedevel -Dusecrosscompile -Dtargetrun=ssh \ -Dcc=$TARGETARCH-gcc \ -Dsysroot=$SYSROOT \ -Dtargetdir=$TARGETDIR \ -Dtargethost="$TARGETHOST" \ -Dtargetuser=$TARGETUSER \ -Dtargetport=$TARGETPORT Now you're ready to run C<make> and C<make test>! As a final word of warning, if you're using adb, C<make test> may appear to hang; this is because it doesn't output anything until it finishes running all tests. You can check its progress by logging into the device, moving to F<$TARGETDIR>, and looking at the file F<output.stdout>. =head3 Notes =over =item * If you are targetting x86 Android, you will have to change C<$TARGETARCH-gcc> to C<i686-linux-android-gcc>. =item * On some older low-end devices -- think early 2.2 era -- some tests, particularly F<t/re/uniprops.t>, may crash the phone, causing it to turn itself off once, and then back on again. =back =head1 Native Builds While Google doesn't provide a native toolchain for Android, you can still get one from the Play Store. =head2 CCTools You may be able to get the CCTools app, which is free. Keep in mind that you want a full toolchain; some apps tend to default to installing only a barebones version without some important utilities, like ar or nm. Once you have the toolchain set up properly, the only remaining hurdle is actually locating where in the device it was installed in. For example, CCTools installs its toolchain in F</data/data/com.pdaxrom.cctools/root/cctools>. With the path in hand, compiling perl is little more than: export SYSROOT=<location of the native toolchain> export LD_LIBRARY_PATH="$SYSROOT/lib:`pwd`:`pwd`/lib:`pwd`/lib/auto:$LD_LIBRARY_PATH" sh Configure -des -Dsysroot=$SYSROOT -Alibpth="/system/lib /vendor/lib" =head2 Termux L<Termux|https://termux.com/> provides an Android terminal emulator and Linux environment. It comes with a cross-compiled perl already installed. Natively compiling perl 5.30 or later should be as straightforward as: sh Configure -des -Alibpth="/system/lib /vendor/lib" This certainly works on Android 8.1 (Oreo) at least... =head1 AUTHOR Brian Fraser <fraserbn@gmail.com> =cut perldebguts.pod 0000644 00000122533 15125556335 0007610 0 ustar 00 =head1 NAME perldebguts - Guts of Perl debugging =head1 DESCRIPTION This is not L<perldebug>, which tells you how to use the debugger. This manpage describes low-level details concerning the debugger's internals, which range from difficult to impossible to understand for anyone who isn't incredibly intimate with Perl's guts. Caveat lector. =head1 Debugger Internals Perl has special debugging hooks at compile-time and run-time used to create debugging environments. These hooks are not to be confused with the I<perl -Dxxx> command described in L<perlrun|perlrun/-Dletters>, which is usable only if a special Perl is built per the instructions in the F<INSTALL> podpage in the Perl source tree. For example, whenever you call Perl's built-in C<caller> function from the package C<DB>, the arguments that the corresponding stack frame was called with are copied to the C<@DB::args> array. These mechanisms are enabled by calling Perl with the B<-d> switch. Specifically, the following additional features are enabled (cf. L<perlvar/$^P>): =over 4 =item * Perl inserts the contents of C<$ENV{PERL5DB}> (or C<BEGIN {require 'perl5db.pl'}> if not present) before the first line of your program. =item * Each array C<@{"_<$filename"}> holds the lines of $filename for a file compiled by Perl. The same is also true for C<eval>ed strings that contain subroutines, or which are currently being executed. The $filename for C<eval>ed strings looks like C<(eval 34)>. Values in this array are magical in numeric context: they compare equal to zero only if the line is not breakable. =item * Each hash C<%{"_<$filename"}> contains breakpoints and actions keyed by line number. Individual entries (as opposed to the whole hash) are settable. Perl only cares about Boolean true here, although the values used by F<perl5db.pl> have the form C<"$break_condition\0$action">. The same holds for evaluated strings that contain subroutines, or which are currently being executed. The $filename for C<eval>ed strings looks like C<(eval 34)>. =item * Each scalar C<${"_<$filename"}> contains C<"_<$filename">. This is also the case for evaluated strings that contain subroutines, or which are currently being executed. The $filename for C<eval>ed strings looks like C<(eval 34)>. =item * After each C<require>d file is compiled, but before it is executed, C<DB::postponed(*{"_<$filename"})> is called if the subroutine C<DB::postponed> exists. Here, the $filename is the expanded name of the C<require>d file, as found in the values of %INC. =item * After each subroutine C<subname> is compiled, the existence of C<$DB::postponed{subname}> is checked. If this key exists, C<DB::postponed(subname)> is called if the C<DB::postponed> subroutine also exists. =item * A hash C<%DB::sub> is maintained, whose keys are subroutine names and whose values have the form C<filename:startline-endline>. C<filename> has the form C<(eval 34)> for subroutines defined inside C<eval>s. =item * When the execution of your program reaches a point that can hold a breakpoint, the C<DB::DB()> subroutine is called if any of the variables C<$DB::trace>, C<$DB::single>, or C<$DB::signal> is true. These variables are not C<local>izable. This feature is disabled when executing inside C<DB::DB()>, including functions called from it unless C<< $^D & (1<<30) >> is true. =item * When execution of the program reaches a subroutine call, a call to C<&DB::sub>(I<args>) is made instead, with C<$DB::sub> set to identify the called subroutine. (This doesn't happen if the calling subroutine was compiled in the C<DB> package.) C<$DB::sub> normally holds the name of the called subroutine, if it has a name by which it can be looked up. Failing that, C<$DB::sub> will hold a reference to the called subroutine. Either way, the C<&DB::sub> subroutine can use C<$DB::sub> as a reference by which to call the called subroutine, which it will normally want to do. X<&DB::lsub>If the call is to an lvalue subroutine, and C<&DB::lsub> is defined C<&DB::lsub>(I<args>) is called instead, otherwise falling back to C<&DB::sub>(I<args>). =item * When execution of the program uses C<goto> to enter a non-XS subroutine and the 0x80 bit is set in C<$^P>, a call to C<&DB::goto> is made, with C<$DB::sub> set to identify the subroutine being entered. The call to C<&DB::goto> does not replace the C<goto>; the requested subroutine will still be entered once C<&DB::goto> has returned. C<$DB::sub> normally holds the name of the subroutine being entered, if it has one. Failing that, C<$DB::sub> will hold a reference to the subroutine being entered. Unlike when C<&DB::sub> is called, it is not guaranteed that C<$DB::sub> can be used as a reference to operate on the subroutine being entered. =back Note that if C<&DB::sub> needs external data for it to work, no subroutine call is possible without it. As an example, the standard debugger's C<&DB::sub> depends on the C<$DB::deep> variable (it defines how many levels of recursion deep into the debugger you can go before a mandatory break). If C<$DB::deep> is not defined, subroutine calls are not possible, even though C<&DB::sub> exists. =head2 Writing Your Own Debugger =head3 Environment Variables The C<PERL5DB> environment variable can be used to define a debugger. For example, the minimal "working" debugger (it actually doesn't do anything) consists of one line: sub DB::DB {} It can easily be defined like this: $ PERL5DB="sub DB::DB {}" perl -d your-script Another brief debugger, slightly more useful, can be created with only the line: sub DB::DB {print ++$i; scalar <STDIN>} This debugger prints a number which increments for each statement encountered and waits for you to hit a newline before continuing to the next statement. The following debugger is actually useful: { package DB; sub DB {} sub sub {print ++$i, " $sub\n"; &$sub} } It prints the sequence number of each subroutine call and the name of the called subroutine. Note that C<&DB::sub> is being compiled into the package C<DB> through the use of the C<package> directive. When it starts, the debugger reads your rc file (F<./.perldb> or F<~/.perldb> under Unix), which can set important options. (A subroutine (C<&afterinit>) can be defined here as well; it is executed after the debugger completes its own initialization.) After the rc file is read, the debugger reads the PERLDB_OPTS environment variable and uses it to set debugger options. The contents of this variable are treated as if they were the argument of an C<o ...> debugger command (q.v. in L<perldebug/"Configurable Options">). =head3 Debugger Internal Variables In addition to the file and subroutine-related variables mentioned above, the debugger also maintains various magical internal variables. =over 4 =item * C<@DB::dbline> is an alias for C<@{"::_<current_file"}>, which holds the lines of the currently-selected file (compiled by Perl), either explicitly chosen with the debugger's C<f> command, or implicitly by flow of execution. Values in this array are magical in numeric context: they compare equal to zero only if the line is not breakable. =item * C<%DB::dbline> is an alias for C<%{"::_<current_file"}>, which contains breakpoints and actions keyed by line number in the currently-selected file, either explicitly chosen with the debugger's C<f> command, or implicitly by flow of execution. As previously noted, individual entries (as opposed to the whole hash) are settable. Perl only cares about Boolean true here, although the values used by F<perl5db.pl> have the form C<"$break_condition\0$action">. =back =head3 Debugger Customization Functions Some functions are provided to simplify customization. =over 4 =item * See L<perldebug/"Configurable Options"> for a description of options parsed by C<DB::parse_options(string)>. =item * C<DB::dump_trace(skip[,count])> skips the specified number of frames and returns a list containing information about the calling frames (all of them, if C<count> is missing). Each entry is reference to a hash with keys C<context> (either C<.>, C<$>, or C<@>), C<sub> (subroutine name, or info about C<eval>), C<args> (C<undef> or a reference to an array), C<file>, and C<line>. =item * C<DB::print_trace(FH, skip[, count[, short]])> prints formatted info about caller frames. The last two functions may be convenient as arguments to C<< < >>, C<< << >> commands. =back Note that any variables and functions that are not documented in this manpages (or in L<perldebug>) are considered for internal use only, and as such are subject to change without notice. =head1 Frame Listing Output Examples The C<frame> option can be used to control the output of frame information. For example, contrast this expression trace: $ perl -de 42 Stack dump during die enabled outside of evals. Loading DB routines from perl5db.pl patch level 0.94 Emacs support available. Enter h or 'h h' for help. main::(-e:1): 0 DB<1> sub foo { 14 } DB<2> sub bar { 3 } DB<3> t print foo() * bar() main::((eval 172):3): print foo() + bar(); main::foo((eval 168):2): main::bar((eval 170):2): 42 with this one, once the C<o>ption C<frame=2> has been set: DB<4> o f=2 frame = '2' DB<5> t print foo() * bar() 3: foo() * bar() entering main::foo 2: sub foo { 14 }; exited main::foo entering main::bar 2: sub bar { 3 }; exited main::bar 42 By way of demonstration, we present below a laborious listing resulting from setting your C<PERLDB_OPTS> environment variable to the value C<f=n N>, and running I<perl -d -V> from the command line. Examples using various values of C<n> are shown to give you a feel for the difference between settings. Long though it may be, this is not a complete listing, but only excerpts. =over 4 =item 1 entering main::BEGIN entering Config::BEGIN Package lib/Exporter.pm. Package lib/Carp.pm. Package lib/Config.pm. entering Config::TIEHASH entering Exporter::import entering Exporter::export entering Config::myconfig entering Config::FETCH entering Config::FETCH entering Config::FETCH entering Config::FETCH =item 2 entering main::BEGIN entering Config::BEGIN Package lib/Exporter.pm. Package lib/Carp.pm. exited Config::BEGIN Package lib/Config.pm. entering Config::TIEHASH exited Config::TIEHASH entering Exporter::import entering Exporter::export exited Exporter::export exited Exporter::import exited main::BEGIN entering Config::myconfig entering Config::FETCH exited Config::FETCH entering Config::FETCH exited Config::FETCH entering Config::FETCH =item 3 in $=main::BEGIN() from /dev/null:0 in $=Config::BEGIN() from lib/Config.pm:2 Package lib/Exporter.pm. Package lib/Carp.pm. Package lib/Config.pm. in $=Config::TIEHASH('Config') from lib/Config.pm:644 in $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/null:0 in $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from li in @=Config::myconfig() from /dev/null:0 in $=Config::FETCH(ref(Config), 'package') from lib/Config.pm:574 in $=Config::FETCH(ref(Config), 'baserev') from lib/Config.pm:574 in $=Config::FETCH(ref(Config), 'PERL_VERSION') from lib/Config.pm:574 in $=Config::FETCH(ref(Config), 'PERL_SUBVERSION') from lib/Config.pm:574 in $=Config::FETCH(ref(Config), 'osname') from lib/Config.pm:574 in $=Config::FETCH(ref(Config), 'osvers') from lib/Config.pm:574 =item 4 in $=main::BEGIN() from /dev/null:0 in $=Config::BEGIN() from lib/Config.pm:2 Package lib/Exporter.pm. Package lib/Carp.pm. out $=Config::BEGIN() from lib/Config.pm:0 Package lib/Config.pm. in $=Config::TIEHASH('Config') from lib/Config.pm:644 out $=Config::TIEHASH('Config') from lib/Config.pm:644 in $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/null:0 in $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from lib/ out $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from lib/ out $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/null:0 out $=main::BEGIN() from /dev/null:0 in @=Config::myconfig() from /dev/null:0 in $=Config::FETCH(ref(Config), 'package') from lib/Config.pm:574 out $=Config::FETCH(ref(Config), 'package') from lib/Config.pm:574 in $=Config::FETCH(ref(Config), 'baserev') from lib/Config.pm:574 out $=Config::FETCH(ref(Config), 'baserev') from lib/Config.pm:574 in $=Config::FETCH(ref(Config), 'PERL_VERSION') from lib/Config.pm:574 out $=Config::FETCH(ref(Config), 'PERL_VERSION') from lib/Config.pm:574 in $=Config::FETCH(ref(Config), 'PERL_SUBVERSION') from lib/Config.pm:574 =item 5 in $=main::BEGIN() from /dev/null:0 in $=Config::BEGIN() from lib/Config.pm:2 Package lib/Exporter.pm. Package lib/Carp.pm. out $=Config::BEGIN() from lib/Config.pm:0 Package lib/Config.pm. in $=Config::TIEHASH('Config') from lib/Config.pm:644 out $=Config::TIEHASH('Config') from lib/Config.pm:644 in $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/null:0 in $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from lib/E out $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from lib/E out $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/null:0 out $=main::BEGIN() from /dev/null:0 in @=Config::myconfig() from /dev/null:0 in $=Config::FETCH('Config=HASH(0x1aa444)', 'package') from lib/Config.pm:574 out $=Config::FETCH('Config=HASH(0x1aa444)', 'package') from lib/Config.pm:574 in $=Config::FETCH('Config=HASH(0x1aa444)', 'baserev') from lib/Config.pm:574 out $=Config::FETCH('Config=HASH(0x1aa444)', 'baserev') from lib/Config.pm:574 =item 6 in $=CODE(0x15eca4)() from /dev/null:0 in $=CODE(0x182528)() from lib/Config.pm:2 Package lib/Exporter.pm. out $=CODE(0x182528)() from lib/Config.pm:0 scalar context return from CODE(0x182528): undef Package lib/Config.pm. in $=Config::TIEHASH('Config') from lib/Config.pm:628 out $=Config::TIEHASH('Config') from lib/Config.pm:628 scalar context return from Config::TIEHASH: empty hash in $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/null:0 in $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from lib/Exporter.pm:171 out $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from lib/Exporter.pm:171 scalar context return from Exporter::export: '' out $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/null:0 scalar context return from Exporter::import: '' =back In all cases shown above, the line indentation shows the call tree. If bit 2 of C<frame> is set, a line is printed on exit from a subroutine as well. If bit 4 is set, the arguments are printed along with the caller info. If bit 8 is set, the arguments are printed even if they are tied or references. If bit 16 is set, the return value is printed, too. When a package is compiled, a line like this Package lib/Carp.pm. is printed with proper indentation. =head1 Debugging Regular Expressions There are two ways to enable debugging output for regular expressions. If your perl is compiled with C<-DDEBUGGING>, you may use the B<-Dr> flag on the command line, and C<-Drv> for more verbose information. Otherwise, one can C<use re 'debug'>, which has effects at both compile time and run time. Since Perl 5.9.5, this pragma is lexically scoped. =head2 Compile-time Output The debugging output at compile time looks like this: Compiling REx '[bc]d(ef*g)+h[ij]k$' size 45 Got 364 bytes for offset annotations. first at 1 rarest char g at 0 rarest char d at 0 1: ANYOF[bc](12) 12: EXACT <d>(14) 14: CURLYX[0] {1,32767}(28) 16: OPEN1(18) 18: EXACT <e>(20) 20: STAR(23) 21: EXACT <f>(0) 23: EXACT <g>(25) 25: CLOSE1(27) 27: WHILEM[1/1](0) 28: NOTHING(29) 29: EXACT <h>(31) 31: ANYOF[ij](42) 42: EXACT <k>(44) 44: EOL(45) 45: END(0) anchored 'de' at 1 floating 'gh' at 3..2147483647 (checking floating) stclass 'ANYOF[bc]' minlen 7 Offsets: [45] 1[4] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 5[1] 0[0] 12[1] 0[0] 6[1] 0[0] 7[1] 0[0] 9[1] 8[1] 0[0] 10[1] 0[0] 11[1] 0[0] 12[0] 12[0] 13[1] 0[0] 14[4] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 18[1] 0[0] 19[1] 20[0] Omitting $` $& $' support. The first line shows the pre-compiled form of the regex. The second shows the size of the compiled form (in arbitrary units, usually 4-byte words) and the total number of bytes allocated for the offset/length table, usually 4+C<size>*8. The next line shows the label I<id> of the first node that does a match. The anchored 'de' at 1 floating 'gh' at 3..2147483647 (checking floating) stclass 'ANYOF[bc]' minlen 7 line (split into two lines above) contains optimizer information. In the example shown, the optimizer found that the match should contain a substring C<de> at offset 1, plus substring C<gh> at some offset between 3 and infinity. Moreover, when checking for these substrings (to abandon impossible matches quickly), Perl will check for the substring C<gh> before checking for the substring C<de>. The optimizer may also use the knowledge that the match starts (at the C<first> I<id>) with a character class, and no string shorter than 7 characters can possibly match. The fields of interest which may appear in this line are =over 4 =item C<anchored> I<STRING> C<at> I<POS> =item C<floating> I<STRING> C<at> I<POS1..POS2> See above. =item C<matching floating/anchored> Which substring to check first. =item C<minlen> The minimal length of the match. =item C<stclass> I<TYPE> Type of first matching node. =item C<noscan> Don't scan for the found substrings. =item C<isall> Means that the optimizer information is all that the regular expression contains, and thus one does not need to enter the regex engine at all. =item C<GPOS> Set if the pattern contains C<\G>. =item C<plus> Set if the pattern starts with a repeated char (as in C<x+y>). =item C<implicit> Set if the pattern starts with C<.*>. =item C<with eval> Set if the pattern contain eval-groups, such as C<(?{ code })> and C<(??{ code })>. =item C<anchored(TYPE)> If the pattern may match only at a handful of places, with C<TYPE> being C<SBOL>, C<MBOL>, or C<GPOS>. See the table below. =back If a substring is known to match at end-of-line only, it may be followed by C<$>, as in C<floating 'k'$>. The optimizer-specific information is used to avoid entering (a slow) regex engine on strings that will not definitely match. If the C<isall> flag is set, a call to the regex engine may be avoided even when the optimizer found an appropriate place for the match. Above the optimizer section is the list of I<nodes> of the compiled form of the regex. Each line has format C< >I<id>: I<TYPE> I<OPTIONAL-INFO> (I<next-id>) =head2 Types of Nodes Here are the current possible types, with short descriptions: =for comment This table is generated by regen/regcomp.pl. Any changes made here will be lost. =for regcomp.pl begin # TYPE arg-description [regnode-struct-suffix] [longjump-len] DESCRIPTION # Exit points END no End of program. SUCCEED no Return from a subroutine, basically. # Line Start Anchors: SBOL no Match "" at beginning of line: /^/, /\A/ MBOL no Same, assuming multiline: /^/m # Line End Anchors: SEOL no Match "" at end of line: /$/ MEOL no Same, assuming multiline: /$/m EOS no Match "" at end of string: /\z/ # Match Start Anchors: GPOS no Matches where last m//g left off. # Word Boundary Opcodes: BOUND no Like BOUNDA for non-utf8, otherwise like BOUNDU BOUNDL no Like BOUND/BOUNDU, but \w and \W are defined by current locale BOUNDU no Match "" at any boundary of a given type using /u rules. BOUNDA no Match "" at any boundary between \w\W or \W\w, where \w is [_a-zA-Z0-9] NBOUND no Like NBOUNDA for non-utf8, otherwise like BOUNDU NBOUNDL no Like NBOUND/NBOUNDU, but \w and \W are defined by current locale NBOUNDU no Match "" at any non-boundary of a given type using using /u rules. NBOUNDA no Match "" betweeen any \w\w or \W\W, where \w is [_a-zA-Z0-9] # [Special] alternatives: REG_ANY no Match any one character (except newline). SANY no Match any one character. ANYOF sv Match character in (or not in) this class, charclass single char match only ANYOFD sv Like ANYOF, but /d is in effect charclass ANYOFL sv Like ANYOF, but /l is in effect charclass ANYOFPOSIXL sv Like ANYOFL, but matches [[:posix:]] charclass_ classes posixl ANYOFH sv 1 Like ANYOF, but only has "High" matches, none in the bitmap; the flags field contains the lowest matchable UTF-8 start byte ANYOFHb sv 1 Like ANYOFH, but all matches share the same UTF-8 start byte, given in the flags field ANYOFHr sv 1 Like ANYOFH, but the flags field contains packed bounds for all matchable UTF-8 start bytes. ANYOFHs sv 1 Like ANYOFHb, but has a string field that gives the leading matchable UTF-8 bytes; flags field is len ANYOFR packed 1 Matches any character in the range given by its packed args: upper 12 bits is the max delta from the base lower 20; the flags field contains the lowest matchable UTF-8 start byte ANYOFRb packed 1 Like ANYOFR, but all matches share the same UTF-8 start byte, given in the flags field ANYOFM byte 1 Like ANYOF, but matches an invariant byte as determined by the mask and arg NANYOFM byte 1 complement of ANYOFM # POSIX Character Classes: POSIXD none Some [[:class:]] under /d; the FLAGS field gives which one POSIXL none Some [[:class:]] under /l; the FLAGS field gives which one POSIXU none Some [[:class:]] under /u; the FLAGS field gives which one POSIXA none Some [[:class:]] under /a; the FLAGS field gives which one NPOSIXD none complement of POSIXD, [[:^class:]] NPOSIXL none complement of POSIXL, [[:^class:]] NPOSIXU none complement of POSIXU, [[:^class:]] NPOSIXA none complement of POSIXA, [[:^class:]] CLUMP no Match any extended grapheme cluster sequence # Alternation # BRANCH The set of branches constituting a single choice are # hooked together with their "next" pointers, since # precedence prevents anything being concatenated to # any individual branch. The "next" pointer of the last # BRANCH in a choice points to the thing following the # whole choice. This is also where the final "next" # pointer of each individual branch points; each branch # starts with the operand node of a BRANCH node. # BRANCH node Match this alternative, or the next... # Literals EXACT str Match this string (flags field is the length). # In a long string node, the U32 argument is the length, and is # immediately followed by the string. LEXACT len:str 1 Match this long string (preceded by length; flags unused). EXACTL str Like EXACT, but /l is in effect (used so locale-related warnings can be checked for) EXACTF str Like EXACT, but match using /id rules; (string not UTF-8, ASCII folded; non-ASCII not) EXACTFL str Like EXACT, but match using /il rules; (string not likely to be folded) EXACTFU str Like EXACT, but match using /iu rules; (string folded) EXACTFAA str Like EXACT, but match using /iaa rules; (string folded except in non-UTF8 patterns: MICRO, SHARP S; folded length <= unfolded) EXACTFUP str Like EXACT, but match using /iu rules; (string not UTF-8, folded except MICRO, SHARP S: hence Problematic) EXACTFLU8 str Like EXACTFU, but use /il, UTF-8, (string is folded, and everything in it is above 255 EXACTFAA_NO_TRIE str Like EXACT, but match using /iaa rules (string not UTF-8, not guaranteed to be folded, not currently trie-able) EXACT_REQ8 str Like EXACT, but only UTF-8 encoded targets can match LEXACT_REQ8 len:str 1 Like LEXACT, but only UTF-8 encoded targets can match EXACTFU_REQ8 str Like EXACTFU, but only UTF-8 encoded targets can match EXACTFU_S_EDGE str /di rules, but nothing in it precludes /ui, except begins and/or ends with [Ss]; (string not UTF-8; compile-time only) # Do nothing types NOTHING no Match empty string. # A variant of above which delimits a group, thus stops optimizations TAIL no Match empty string. Can jump here from outside. # Loops # STAR,PLUS '?', and complex '*' and '+', are implemented as # circular BRANCH structures. Simple cases # (one character per match) are implemented with STAR # and PLUS for speed and to minimize recursive plunges. # STAR node Match this (simple) thing 0 or more times. PLUS node Match this (simple) thing 1 or more times. CURLY sv 2 Match this simple thing {n,m} times. CURLYN no 2 Capture next-after-this simple thing CURLYM no 2 Capture this medium-complex thing {n,m} times. CURLYX sv 2 Match this complex thing {n,m} times. # This terminator creates a loop structure for CURLYX WHILEM no Do curly processing and see if rest matches. # Buffer related # OPEN,CLOSE,GROUPP ...are numbered at compile time. OPEN num 1 Mark this point in input as start of #n. CLOSE num 1 Close corresponding OPEN of #n. SROPEN none Same as OPEN, but for script run SRCLOSE none Close preceding SROPEN REF num 1 Match some already matched string REFF num 1 Match already matched string, using /di rules. REFFL num 1 Match already matched string, using /li rules. REFFU num 1 Match already matched string, usng /ui. REFFA num 1 Match already matched string, using /aai rules. # Named references. Code in regcomp.c assumes that these all are after # the numbered references REFN no-sv 1 Match some already matched string REFFN no-sv 1 Match already matched string, using /di rules. REFFLN no-sv 1 Match already matched string, using /li rules. REFFUN num 1 Match already matched string, using /ui rules. REFFAN num 1 Match already matched string, using /aai rules. # Support for long RE LONGJMP off 1 1 Jump far away. BRANCHJ off 1 1 BRANCH with long offset. # Special Case Regops IFMATCH off 1 1 Succeeds if the following matches; non-zero flags "f", next_off "o" means lookbehind assertion starting "f..(f-o)" characters before current UNLESSM off 1 1 Fails if the following matches; non-zero flags "f", next_off "o" means lookbehind assertion starting "f..(f-o)" characters before current SUSPEND off 1 1 "Independent" sub-RE. IFTHEN off 1 1 Switch, should be preceded by switcher. GROUPP num 1 Whether the group matched. # The heavy worker EVAL evl/flags Execute some Perl code. 2L # Modifiers MINMOD no Next operator is not greedy. LOGICAL no Next opcode should set the flag only. # This is not used yet RENUM off 1 1 Group with independently numbered parens. # Trie Related # Behave the same as A|LIST|OF|WORDS would. The '..C' variants # have inline charclass data (ascii only), the 'C' store it in the # structure. TRIE trie 1 Match many EXACT(F[ALU]?)? at once. flags==type TRIEC trie Same as TRIE, but with embedded charclass charclass data AHOCORASICK trie 1 Aho Corasick stclass. flags==type AHOCORASICKC trie Same as AHOCORASICK, but with embedded charclass charclass data # Regex Subroutines GOSUB num/ofs 2L recurse to paren arg1 at (signed) ofs arg2 # Special conditionals GROUPPN no-sv 1 Whether the group matched. INSUBP num 1 Whether we are in a specific recurse. DEFINEP none 1 Never execute directly. # Backtracking Verbs ENDLIKE none Used only for the type field of verbs OPFAIL no-sv 1 Same as (?!), but with verb arg ACCEPT no-sv/num Accepts the current matched string, with 2L verbar # Verbs With Arguments VERB no-sv 1 Used only for the type field of verbs PRUNE no-sv 1 Pattern fails at this startpoint if no- backtracking through this MARKPOINT no-sv 1 Push the current location for rollback by cut. SKIP no-sv 1 On failure skip forward (to the mark) before retrying COMMIT no-sv 1 Pattern fails outright if backtracking through this CUTGROUP no-sv 1 On failure go to the next alternation in the group # Control what to keep in $&. KEEPS no $& begins here. # New charclass like patterns LNBREAK none generic newline pattern # SPECIAL REGOPS # This is not really a node, but an optimized away piece of a "long" # node. To simplify debugging output, we mark it as if it were a node OPTIMIZED off Placeholder for dump. # Special opcode with the property that no opcode in a compiled program # will ever be of this type. Thus it can be used as a flag value that # no other opcode has been seen. END is used similarly, in that an END # node cant be optimized. So END implies "unoptimizable" and PSEUDO # mean "not seen anything to optimize yet". PSEUDO off Pseudo opcode for internal use. REGEX_SET depth p Regex set, temporary node used in pre- optimization compilation =for regcomp.pl end =for unprinted-credits Next section M-J. Dominus (mjd-perl-patch+@plover.com) 20010421 Following the optimizer information is a dump of the offset/length table, here split across several lines: Offsets: [45] 1[4] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 5[1] 0[0] 12[1] 0[0] 6[1] 0[0] 7[1] 0[0] 9[1] 8[1] 0[0] 10[1] 0[0] 11[1] 0[0] 12[0] 12[0] 13[1] 0[0] 14[4] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 0[0] 18[1] 0[0] 19[1] 20[0] The first line here indicates that the offset/length table contains 45 entries. Each entry is a pair of integers, denoted by C<offset[length]>. Entries are numbered starting with 1, so entry #1 here is C<1[4]> and entry #12 is C<5[1]>. C<1[4]> indicates that the node labeled C<1:> (the C<1: ANYOF[bc]>) begins at character position 1 in the pre-compiled form of the regex, and has a length of 4 characters. C<5[1]> in position 12 indicates that the node labeled C<12:> (the C<< 12: EXACT <d> >>) begins at character position 5 in the pre-compiled form of the regex, and has a length of 1 character. C<12[1]> in position 14 indicates that the node labeled C<14:> (the C<< 14: CURLYX[0] {1,32767} >>) begins at character position 12 in the pre-compiled form of the regex, and has a length of 1 character---that is, it corresponds to the C<+> symbol in the precompiled regex. C<0[0]> items indicate that there is no corresponding node. =head2 Run-time Output First of all, when doing a match, one may get no run-time output even if debugging is enabled. This means that the regex engine was never entered and that all of the job was therefore done by the optimizer. If the regex engine was entered, the output may look like this: Matching '[bc]d(ef*g)+h[ij]k$' against 'abcdefg__gh__' Setting an EVAL scope, savestack=3 2 <ab> <cdefg__gh_> | 1: ANYOF 3 <abc> <defg__gh_> | 11: EXACT <d> 4 <abcd> <efg__gh_> | 13: CURLYX {1,32767} 4 <abcd> <efg__gh_> | 26: WHILEM 0 out of 1..32767 cc=effff31c 4 <abcd> <efg__gh_> | 15: OPEN1 4 <abcd> <efg__gh_> | 17: EXACT <e> 5 <abcde> <fg__gh_> | 19: STAR EXACT <f> can match 1 times out of 32767... Setting an EVAL scope, savestack=3 6 <bcdef> <g__gh__> | 22: EXACT <g> 7 <bcdefg> <__gh__> | 24: CLOSE1 7 <bcdefg> <__gh__> | 26: WHILEM 1 out of 1..32767 cc=effff31c Setting an EVAL scope, savestack=12 7 <bcdefg> <__gh__> | 15: OPEN1 7 <bcdefg> <__gh__> | 17: EXACT <e> restoring \1 to 4(4)..7 failed, try continuation... 7 <bcdefg> <__gh__> | 27: NOTHING 7 <bcdefg> <__gh__> | 28: EXACT <h> failed... failed... The most significant information in the output is about the particular I<node> of the compiled regex that is currently being tested against the target string. The format of these lines is C< >I<STRING-OFFSET> <I<PRE-STRING>> <I<POST-STRING>> |I<ID>: I<TYPE> The I<TYPE> info is indented with respect to the backtracking level. Other incidental information appears interspersed within. =head1 Debugging Perl Memory Usage Perl is a profligate wastrel when it comes to memory use. There is a saying that to estimate memory usage of Perl, assume a reasonable algorithm for memory allocation, multiply that estimate by 10, and while you still may miss the mark, at least you won't be quite so astonished. This is not absolutely true, but may provide a good grasp of what happens. Assume that an integer cannot take less than 20 bytes of memory, a float cannot take less than 24 bytes, a string cannot take less than 32 bytes (all these examples assume 32-bit architectures, the result are quite a bit worse on 64-bit architectures). If a variable is accessed in two of three different ways (which require an integer, a float, or a string), the memory footprint may increase yet another 20 bytes. A sloppy malloc(3) implementation can inflate these numbers dramatically. On the opposite end of the scale, a declaration like sub foo; may take up to 500 bytes of memory, depending on which release of Perl you're running. Anecdotal estimates of source-to-compiled code bloat suggest an eightfold increase. This means that the compiled form of reasonable (normally commented, properly indented etc.) code will take about eight times more space in memory than the code took on disk. The B<-DL> command-line switch is obsolete since circa Perl 5.6.0 (it was available only if Perl was built with C<-DDEBUGGING>). The switch was used to track Perl's memory allocations and possible memory leaks. These days the use of malloc debugging tools like F<Purify> or F<valgrind> is suggested instead. See also L<perlhacktips/PERL_MEM_LOG>. One way to find out how much memory is being used by Perl data structures is to install the Devel::Size module from CPAN: it gives you the minimum number of bytes required to store a particular data structure. Please be mindful of the difference between the size() and total_size(). If Perl has been compiled using Perl's malloc you can analyze Perl memory usage by setting $ENV{PERL_DEBUG_MSTATS}. =head2 Using C<$ENV{PERL_DEBUG_MSTATS}> If your perl is using Perl's malloc() and was compiled with the necessary switches (this is the default), then it will print memory usage statistics after compiling your code when C<< $ENV{PERL_DEBUG_MSTATS} > 1 >>, and before termination of the program when C<< $ENV{PERL_DEBUG_MSTATS} >= 1 >>. The report format is similar to the following example: $ PERL_DEBUG_MSTATS=2 perl -e "require Carp" Memory allocation statistics after compilation: (buckets 4(4)..8188(8192) 14216 free: 130 117 28 7 9 0 2 2 1 0 0 437 61 36 0 5 60924 used: 125 137 161 55 7 8 6 16 2 0 1 74 109 304 84 20 Total sbrk(): 77824/21:119. Odd ends: pad+heads+chain+tail: 0+636+0+2048. Memory allocation statistics after execution: (buckets 4(4)..8188(8192) 30888 free: 245 78 85 13 6 2 1 3 2 0 1 315 162 39 42 11 175816 used: 265 176 1112 111 26 22 11 27 2 1 1 196 178 1066 798 39 Total sbrk(): 215040/47:145. Odd ends: pad+heads+chain+tail: 0+2192+0+6144. It is possible to ask for such a statistic at arbitrary points in your execution using the mstat() function out of the standard Devel::Peek module. Here is some explanation of that format: =over 4 =item C<buckets SMALLEST(APPROX)..GREATEST(APPROX)> Perl's malloc() uses bucketed allocations. Every request is rounded up to the closest bucket size available, and a bucket is taken from the pool of buckets of that size. The line above describes the limits of buckets currently in use. Each bucket has two sizes: memory footprint and the maximal size of user data that can fit into this bucket. Suppose in the above example that the smallest bucket were size 4. The biggest bucket would have usable size 8188, and the memory footprint would be 8192. In a Perl built for debugging, some buckets may have negative usable size. This means that these buckets cannot (and will not) be used. For larger buckets, the memory footprint may be one page greater than a power of 2. If so, the corresponding power of two is printed in the C<APPROX> field above. =item Free/Used The 1 or 2 rows of numbers following that correspond to the number of buckets of each size between C<SMALLEST> and C<GREATEST>. In the first row, the sizes (memory footprints) of buckets are powers of two--or possibly one page greater. In the second row, if present, the memory footprints of the buckets are between the memory footprints of two buckets "above". For example, suppose under the previous example, the memory footprints were free: 8 16 32 64 128 256 512 1024 2048 4096 8192 4 12 24 48 80 With a non-C<DEBUGGING> perl, the buckets starting from C<128> have a 4-byte overhead, and thus an 8192-long bucket may take up to 8188-byte allocations. =item C<Total sbrk(): SBRKed/SBRKs:CONTINUOUS> The first two fields give the total amount of memory perl sbrk(2)ed (ess-broken? :-) and number of sbrk(2)s used. The third number is what perl thinks about continuity of returned chunks. So long as this number is positive, malloc() will assume that it is probable that sbrk(2) will provide continuous memory. Memory allocated by external libraries is not counted. =item C<pad: 0> The amount of sbrk(2)ed memory needed to keep buckets aligned. =item C<heads: 2192> Although memory overhead of bigger buckets is kept inside the bucket, for smaller buckets, it is kept in separate areas. This field gives the total size of these areas. =item C<chain: 0> malloc() may want to subdivide a bigger bucket into smaller buckets. If only a part of the deceased bucket is left unsubdivided, the rest is kept as an element of a linked list. This field gives the total size of these chunks. =item C<tail: 6144> To minimize the number of sbrk(2)s, malloc() asks for more memory. This field gives the size of the yet unused part, which is sbrk(2)ed, but never touched. =back =head1 SEE ALSO L<perldebug>, L<perlguts>, L<perlrun> L<re>, and L<Devel::DProf>. perlvms.pod 0000644 00000143207 15125556335 0006761 0 ustar 00 =head1 NAME perlvms - VMS-specific documentation for Perl =head1 DESCRIPTION Gathered below are notes describing details of Perl 5's behavior on VMS. They are a supplement to the regular Perl 5 documentation, so we have focussed on the ways in which Perl 5 functions differently under VMS than it does under Unix, and on the interactions between Perl and the rest of the operating system. We haven't tried to duplicate complete descriptions of Perl features from the main Perl documentation, which can be found in the F<[.pod]> subdirectory of the Perl distribution. We hope these notes will save you from confusion and lost sleep when writing Perl scripts on VMS. If you find we've missed something you think should appear here, please don't hesitate to drop a line to vmsperl@perl.org. =head1 Installation Directions for building and installing Perl 5 can be found in the file F<README.vms> in the main source directory of the Perl distribution. =head1 Organization of Perl Images =head2 Core Images During the build process, three Perl images are produced. F<Miniperl.Exe> is an executable image which contains all of the basic functionality of Perl, but cannot take advantage of Perl XS extensions and has a hard-wired list of library locations for loading pure-Perl modules. It is used extensively to build and test Perl and various extensions, but is not installed. Most of the complete Perl resides in the shareable image F<PerlShr.Exe>, which provides a core to which the Perl executable image and all Perl extensions are linked. It is generally located via the logical name F<PERLSHR>. While it's possible to put the image in F<SYS$SHARE> to make it loadable, that's not recommended. And while you may wish to INSTALL the image for performance reasons, you should not install it with privileges; if you do, the result will not be what you expect as image privileges are disabled during Perl start-up. Finally, F<Perl.Exe> is an executable image containing the main entry point for Perl, as well as some initialization code. It should be placed in a public directory, and made world executable. In order to run Perl with command line arguments, you should define a foreign command to invoke this image. =head2 Perl Extensions Perl extensions are packages which provide both XS and Perl code to add new functionality to perl. (XS is a meta-language which simplifies writing C code which interacts with Perl, see L<perlxs> for more details.) The Perl code for an extension is treated like any other library module - it's made available in your script through the appropriate C<use> or C<require> statement, and usually defines a Perl package containing the extension. The portion of the extension provided by the XS code may be connected to the rest of Perl in either of two ways. In the B<static> configuration, the object code for the extension is linked directly into F<PerlShr.Exe>, and is initialized whenever Perl is invoked. In the B<dynamic> configuration, the extension's machine code is placed into a separate shareable image, which is mapped by Perl's DynaLoader when the extension is C<use>d or C<require>d in your script. This allows you to maintain the extension as a separate entity, at the cost of keeping track of the additional shareable image. Most extensions can be set up as either static or dynamic. The source code for an extension usually resides in its own directory. At least three files are generally provided: I<Extshortname>F<.xs> (where I<Extshortname> is the portion of the extension's name following the last C<::>), containing the XS code, I<Extshortname>F<.pm>, the Perl library module for the extension, and F<Makefile.PL>, a Perl script which uses the C<MakeMaker> library modules supplied with Perl to generate a F<Descrip.MMS> file for the extension. =head2 Installing static extensions Since static extensions are incorporated directly into F<PerlShr.Exe>, you'll have to rebuild Perl to incorporate a new extension. You should edit the main F<Descrip.MMS> or F<Makefile> you use to build Perl, adding the extension's name to the C<ext> macro, and the extension's object file to the C<extobj> macro. You'll also need to build the extension's object file, either by adding dependencies to the main F<Descrip.MMS>, or using a separate F<Descrip.MMS> for the extension. Then, rebuild F<PerlShr.Exe> to incorporate the new code. Finally, you'll need to copy the extension's Perl library module to the F<[.>I<Extname>F<]> subdirectory under one of the directories in C<@INC>, where I<Extname> is the name of the extension, with all C<::> replaced by C<.> (e.g. the library module for extension Foo::Bar would be copied to a F<[.Foo.Bar]> subdirectory). =head2 Installing dynamic extensions In general, the distributed kit for a Perl extension includes a file named Makefile.PL, which is a Perl program which is used to create a F<Descrip.MMS> file which can be used to build and install the files required by the extension. The kit should be unpacked into a directory tree B<not> under the main Perl source directory, and the procedure for building the extension is simply $ perl Makefile.PL ! Create Descrip.MMS $ mmk ! Build necessary files $ mmk test ! Run test code, if supplied $ mmk install ! Install into public Perl tree VMS support for this process in the current release of Perl is sufficient to handle most extensions. (See the MakeMaker documentation for more details on installation options for extensions.) =over 4 =item * the F<[.Lib.Auto.>I<Arch>I<$PVers>I<Extname>F<]> subdirectory of one of the directories in C<@INC> (where I<PVers> is the version of Perl you're using, as supplied in C<$]>, with '.' converted to '_'), or =item * one of the directories in C<@INC>, or =item * a directory which the extensions Perl library module passes to the DynaLoader when asking it to map the shareable image, or =item * F<Sys$Share> or F<Sys$Library>. =back If the shareable image isn't in any of these places, you'll need to define a logical name I<Extshortname>, where I<Extshortname> is the portion of the extension's name after the last C<::>, which translates to the full file specification of the shareable image. =head1 File specifications =head2 Syntax We have tried to make Perl aware of both VMS-style and Unix-style file specifications wherever possible. You may use either style, or both, on the command line and in scripts, but you may not combine the two styles within a single file specification. VMS Perl interprets Unix pathnames in much the same way as the CRTL (I<e.g.> the first component of an absolute path is read as the device name for the VMS file specification). There are a set of functions provided in the C<VMS::Filespec> package for explicit interconversion between VMS and Unix syntax; its documentation provides more details. We've tried to minimize the dependence of Perl library modules on Unix syntax, but you may find that some of these, as well as some scripts written for Unix systems, will require that you use Unix syntax, since they will assume that '/' is the directory separator, I<etc.> If you find instances of this in the Perl distribution itself, please let us know, so we can try to work around them. Also when working on Perl programs on VMS, if you need a syntax in a specific operating system format, then you need either to check the appropriate DECC$ feature logical, or call a conversion routine to force it to that format. The feature logical name DECC$FILENAME_UNIX_REPORT modifies traditional Perl behavior in the conversion of file specifications from Unix to VMS format in order to follow the extended character handling rules now expected by the CRTL. Specifically, when this feature is in effect, the C<./.../> in a Unix path is now translated to C<[.^.^.^.]> instead of the traditional VMS C<[...]>. To be compatible with what MakeMaker expects, if a VMS path cannot be translated to a Unix path, it is passed through unchanged, so C<unixify("[...]")> will return C<[...]>. There are several ambiguous cases where a conversion routine cannot determine whether an input filename is in Unix format or in VMS format, since now both VMS and Unix file specifications may have characters in them that could be mistaken for syntax delimiters of the other type. So some pathnames simply cannot be used in a mode that allows either type of pathname to be present. Perl will tend to assume that an ambiguous filename is in Unix format. Allowing "." as a version delimiter is simply incompatible with determining whether a pathname is in VMS format or in Unix format with extended file syntax. There is no way to know whether "perl-5.8.6" is a Unix "perl-5.8.6" or a VMS "perl-5.8;6" when passing it to unixify() or vmsify(). The DECC$FILENAME_UNIX_REPORT logical name controls how Perl interprets filenames to the extent that Perl uses the CRTL internally for many purposes, and attempts to follow CRTL conventions for reporting filenames. The DECC$FILENAME_UNIX_ONLY feature differs in that it expects all filenames passed to the C run-time to be already in Unix format. This feature is not yet supported in Perl since Perl uses traditional OpenVMS file specifications internally and in the test harness, and it is not yet clear whether this mode will be useful or useable. The feature logical name DECC$POSIX_COMPLIANT_PATHNAMES is new with the RMS Symbolic Link SDK and included with OpenVMS v8.3, but is not yet supported in Perl. =head2 Filename Case Perl enables DECC$EFS_CASE_PRESERVE and DECC$ARGV_PARSE_STYLE by default. Note that the latter only takes effect when extended parse is set in the process in which Perl is running. When these features are explicitly disabled in the environment or the CRTL does not support them, Perl follows the traditional CRTL behavior of downcasing command-line arguments and returning file specifications in lower case only. I<N. B.> It is very easy to get tripped up using a mixture of other programs, external utilities, and Perl scripts that are in varying states of being able to handle case preservation. For example, a file created by an older version of an archive utility or a build utility such as MMK or MMS may generate a filename in all upper case even on an ODS-5 volume. If this filename is later retrieved by a Perl script or module in a case preserving environment, that upper case name may not match the mixed-case or lower-case expectations of the Perl code. Your best bet is to follow an all-or-nothing approach to case preservation: either don't use it at all, or make sure your entire toolchain and application environment support and use it. OpenVMS Alpha v7.3-1 and later and all version of OpenVMS I64 support case sensitivity as a process setting (see C<SET PROCESS /CASE_LOOKUP=SENSITIVE>). Perl does not currently support case sensitivity on VMS, but it may in the future, so Perl programs should use the C<< File::Spec->case_tolerant >> method to determine the state, and not the C<$^O> variable. =head2 Symbolic Links When built on an ODS-5 volume with symbolic links enabled, Perl by default supports symbolic links when the requisite support is available in the filesystem and CRTL (generally 64-bit OpenVMS v8.3 and later). There are a number of limitations and caveats to be aware of when working with symbolic links on VMS. Most notably, the target of a valid symbolic link must be expressed as a Unix-style path and it must exist on a volume visible from your POSIX root (see the C<SHOW ROOT> command in DCL help). For further details on symbolic link capabilities and requirements, see chapter 12 of the CRTL manual that ships with OpenVMS v8.3 or later. =head2 Wildcard expansion File specifications containing wildcards are allowed both on the command line and within Perl globs (e.g. C<E<lt>*.cE<gt>>). If the wildcard filespec uses VMS syntax, the resultant filespecs will follow VMS syntax; if a Unix-style filespec is passed in, Unix-style filespecs will be returned. Similar to the behavior of wildcard globbing for a Unix shell, one can escape command line wildcards with double quotation marks C<"> around a perl program command line argument. However, owing to the stripping of C<"> characters carried out by the C handling of argv you will need to escape a construct such as this one (in a directory containing the files F<PERL.C>, F<PERL.EXE>, F<PERL.H>, and F<PERL.OBJ>): $ perl -e "print join(' ',@ARGV)" perl.* perl.c perl.exe perl.h perl.obj in the following triple quoted manner: $ perl -e "print join(' ',@ARGV)" """perl.*""" perl.* In both the case of unquoted command line arguments or in calls to C<glob()> VMS wildcard expansion is performed. (csh-style wildcard expansion is available if you use C<File::Glob::glob>.) If the wildcard filespec contains a device or directory specification, then the resultant filespecs will also contain a device and directory; otherwise, device and directory information are removed. VMS-style resultant filespecs will contain a full device and directory, while Unix-style resultant filespecs will contain only as much of a directory path as was present in the input filespec. For example, if your default directory is Perl_Root:[000000], the expansion of C<[.t]*.*> will yield filespecs like "perl_root:[t]base.dir", while the expansion of C<t/*/*> will yield filespecs like "t/base.dir". (This is done to match the behavior of glob expansion performed by Unix shells.) Similarly, the resultant filespec will contain the file version only if one was present in the input filespec. =head2 Pipes Input and output pipes to Perl filehandles are supported; the "file name" is passed to lib$spawn() for asynchronous execution. You should be careful to close any pipes you have opened in a Perl script, lest you leave any "orphaned" subprocesses around when Perl exits. You may also use backticks to invoke a DCL subprocess, whose output is used as the return value of the expression. The string between the backticks is handled as if it were the argument to the C<system> operator (see below). In this case, Perl will wait for the subprocess to complete before continuing. The mailbox (MBX) that perl can create to communicate with a pipe defaults to a buffer size of 8192 on 64-bit systems, 512 on VAX. The default buffer size is adjustable via the logical name PERL_MBX_SIZE provided that the value falls between 128 and the SYSGEN parameter MAXBUF inclusive. For example, to set the mailbox size to 32767 use C<$ENV{'PERL_MBX_SIZE'} = 32767;> and then open and use pipe constructs. An alternative would be to issue the command: $ Define PERL_MBX_SIZE 32767 before running your wide record pipe program. A larger value may improve performance at the expense of the BYTLM UAF quota. =head1 PERL5LIB and PERLLIB The PERL5LIB and PERLLIB environment elements work as documented in L<perl>, except that the element separator is, by default, '|' instead of ':'. However, when running under a Unix shell as determined by the logical name C<GNV$UNIX_SHELL>, the separator will be ':' as on Unix systems. The directory specifications may use either VMS or Unix syntax. =head1 The Perl Forked Debugger The Perl forked debugger places the debugger commands and output in a separate X-11 terminal window so that commands and output from multiple processes are not mixed together. Perl on VMS supports an emulation of the forked debugger when Perl is run on a VMS system that has X11 support installed. To use the forked debugger, you need to have the default display set to an X-11 Server and some environment variables set that Unix expects. The forked debugger requires the environment variable C<TERM> to be C<xterm>, and the environment variable C<DISPLAY> to exist. C<xterm> must be in lower case. $define TERM "xterm" $define DISPLAY "hostname:0.0" Currently the value of C<DISPLAY> is ignored. It is recommended that it be set to be the hostname of the display, the server and screen in Unix notation. In the future the value of DISPLAY may be honored by Perl instead of using the default display. It may be helpful to always use the forked debugger so that script I/O is separated from debugger I/O. You can force the debugger to be forked by assigning a value to the logical name <PERLDB_PIDS> that is not a process identification number. $define PERLDB_PIDS XXXX =head1 PERL_VMS_EXCEPTION_DEBUG The PERL_VMS_EXCEPTION_DEBUG being defined as "ENABLE" will cause the VMS debugger to be invoked if a fatal exception that is not otherwise handled is raised. The purpose of this is to allow debugging of internal Perl problems that would cause such a condition. This allows the programmer to look at the execution stack and variables to find out the cause of the exception. As the debugger is being invoked as the Perl interpreter is about to do a fatal exit, continuing the execution in debug mode is usually not practical. Starting Perl in the VMS debugger may change the program execution profile in a way that such problems are not reproduced. The C<kill> function can be used to test this functionality from within a program. In typical VMS style, only the first letter of the value of this logical name is actually checked in a case insensitive mode, and it is considered enabled if it is the value "T","1" or "E". This logical name must be defined before Perl is started. =head1 Command line =head2 I/O redirection and backgrounding Perl for VMS supports redirection of input and output on the command line, using a subset of Bourne shell syntax: =over 4 =item * C<E<lt>file> reads stdin from C<file>, =item * C<E<gt>file> writes stdout to C<file>, =item * C<E<gt>E<gt>file> appends stdout to C<file>, =item * C<2E<gt>file> writes stderr to C<file>, =item * C<2E<gt>E<gt>file> appends stderr to C<file>, and =item * C<< 2>&1 >> redirects stderr to stdout. =back In addition, output may be piped to a subprocess, using the character '|'. Anything after this character on the command line is passed to a subprocess for execution; the subprocess takes the output of Perl as its input. Finally, if the command line ends with '&', the entire command is run in the background as an asynchronous subprocess. =head2 Command line switches The following command line switches behave differently under VMS than described in L<perlrun>. Note also that in order to pass uppercase switches to Perl, you need to enclose them in double-quotes on the command line, since the CRTL downcases all unquoted strings. On newer 64 bit versions of OpenVMS, a process setting now controls if the quoting is needed to preserve the case of command line arguments. =over 4 =item -i If the C<-i> switch is present but no extension for a backup copy is given, then inplace editing creates a new version of a file; the existing copy is not deleted. (Note that if an extension is given, an existing file is renamed to the backup file, as is the case under other operating systems, so it does not remain as a previous version under the original filename.) =item -S If the C<"-S"> or C<-"S"> switch is present I<and> the script name does not contain a directory, then Perl translates the logical name DCL$PATH as a searchlist, using each translation as a directory in which to look for the script. In addition, if no file type is specified, Perl looks in each directory for a file matching the name specified, with a blank type, a type of F<.pl>, and a type of F<.com>, in that order. =item -u The C<-u> switch causes the VMS debugger to be invoked after the Perl program is compiled, but before it has run. It does not create a core dump file. =back =head1 Perl functions As of the time this document was last revised, the following Perl functions were implemented in the VMS port of Perl (functions marked with * are discussed in more detail below): file tests*, abs, alarm, atan, backticks*, binmode*, bless, caller, chdir, chmod, chown, chomp, chop, chr, close, closedir, cos, crypt*, defined, delete, die, do, dump*, each, endgrent, endpwent, eof, eval, exec*, exists, exit, exp, fileno, flock getc, getgrent*, getgrgid*, getgrnam, getlogin, getppid, getpwent*, getpwnam*, getpwuid*, glob, gmtime*, goto, grep, hex, ioctl, import, index, int, join, keys, kill*, last, lc, lcfirst, lchown*, length, link*, local, localtime, log, lstat, m//, map, mkdir, my, next, no, oct, open, opendir, ord, pack, pipe, pop, pos, print, printf, push, q//, qq//, qw//, qx//*, quotemeta, rand, read, readdir, readlink*, redo, ref, rename, require, reset, return, reverse, rewinddir, rindex, rmdir, s///, scalar, seek, seekdir, select(internal), select (system call)*, setgrent, setpwent, shift, sin, sleep, socketpair, sort, splice, split, sprintf, sqrt, srand, stat, study, substr, symlink*, sysread, system*, syswrite, tell, telldir, tie, time, times*, tr///, uc, ucfirst, umask, undef, unlink*, unpack, untie, unshift, use, utime*, values, vec, wait, waitpid*, wantarray, warn, write, y/// The following functions were not implemented in the VMS port, and calling them produces a fatal error (usually) or undefined behavior (rarely, we hope): chroot, dbmclose, dbmopen, fork*, getpgrp, getpriority, msgctl, msgget, msgsend, msgrcv, semctl, semget, semop, setpgrp, setpriority, shmctl, shmget, shmread, shmwrite, syscall The following functions are available on Perls compiled with Dec C 5.2 or greater and running VMS 7.0 or greater: truncate The following functions are available on Perls built on VMS 7.2 or greater: fcntl (without locking) The following functions may or may not be implemented, depending on what type of socket support you've built into your copy of Perl: accept, bind, connect, getpeername, gethostbyname, getnetbyname, getprotobyname, getservbyname, gethostbyaddr, getnetbyaddr, getprotobynumber, getservbyport, gethostent, getnetent, getprotoent, getservent, sethostent, setnetent, setprotoent, setservent, endhostent, endnetent, endprotoent, endservent, getsockname, getsockopt, listen, recv, select(system call)*, send, setsockopt, shutdown, socket The following function is available on Perls built on 64 bit OpenVMS v8.2 with hard links enabled on an ODS-5 formatted build disk. CRTL support is in principle available as of OpenVMS v7.3-1, and better configuration support could detect this. link The following functions are available on Perls built on 64 bit OpenVMS v8.2 and later. CRTL support is in principle available as of OpenVMS v7.3-2, and better configuration support could detect this. getgrgid, getgrnam, getpwnam, getpwuid, setgrent, ttyname The following functions are available on Perls built on 64 bit OpenVMS v8.2 and later. statvfs, socketpair =over 4 =item File tests The tests C<-b>, C<-B>, C<-c>, C<-C>, C<-d>, C<-e>, C<-f>, C<-o>, C<-M>, C<-s>, C<-S>, C<-t>, C<-T>, and C<-z> work as advertised. The return values for C<-r>, C<-w>, and C<-x> tell you whether you can actually access the file; this may not reflect the UIC-based file protections. Since real and effective UIC don't differ under VMS, C<-O>, C<-R>, C<-W>, and C<-X> are equivalent to C<-o>, C<-r>, C<-w>, and C<-x>. Similarly, several other tests, including C<-A>, C<-g>, C<-k>, C<-l>, C<-p>, and C<-u>, aren't particularly meaningful under VMS, and the values returned by these tests reflect whatever your CRTL C<stat()> routine does to the equivalent bits in the st_mode field. Finally, C<-d> returns true if passed a device specification without an explicit directory (e.g. C<DUA1:>), as well as if passed a directory. There are DECC feature logical names AND ODS-5 volume attributes that also control what values are returned for the date fields. Note: Some sites have reported problems when using the file-access tests (C<-r>, C<-w>, and C<-x>) on files accessed via DEC's DFS. Specifically, since DFS does not currently provide access to the extended file header of files on remote volumes, attempts to examine the ACL fail, and the file tests will return false, with C<$!> indicating that the file does not exist. You can use C<stat> on these files, since that checks UIC-based protection only, and then manually check the appropriate bits, as defined by your C compiler's F<stat.h>, in the mode value it returns, if you need an approximation of the file's protections. =item backticks Backticks create a subprocess, and pass the enclosed string to it for execution as a DCL command. Since the subprocess is created directly via C<lib$spawn()>, any valid DCL command string may be specified. =item binmode FILEHANDLE The C<binmode> operator will attempt to insure that no translation of carriage control occurs on input from or output to this filehandle. Since this involves reopening the file and then restoring its file position indicator, if this function returns FALSE, the underlying filehandle may no longer point to an open file, or may point to a different position in the file than before C<binmode> was called. Note that C<binmode> is generally not necessary when using normal filehandles; it is provided so that you can control I/O to existing record-structured files when necessary. You can also use the C<vmsfopen> function in the VMS::Stdio extension to gain finer control of I/O to files and devices with different record structures. =item crypt PLAINTEXT, USER The C<crypt> operator uses the C<sys$hash_password> system service to generate the hashed representation of PLAINTEXT. If USER is a valid username, the algorithm and salt values are taken from that user's UAF record. If it is not, then the preferred algorithm and a salt of 0 are used. The quadword encrypted value is returned as an 8-character string. The value returned by C<crypt> may be compared against the encrypted password from the UAF returned by the C<getpw*> functions, in order to authenticate users. If you're going to do this, remember that the encrypted password in the UAF was generated using uppercase username and password strings; you'll have to upcase the arguments to C<crypt> to insure that you'll get the proper value: sub validate_passwd { my($user,$passwd) = @_; my($pwdhash); if ( !($pwdhash = (getpwnam($user))[1]) || $pwdhash ne crypt("\U$passwd","\U$name") ) { intruder_alert($name); } return 1; } =item die C<die> will force the native VMS exit status to be an SS$_ABORT code if neither of the $! or $? status values are ones that would cause the native status to be interpreted as being what VMS classifies as SEVERE_ERROR severity for DCL error handling. When C<PERL_VMS_POSIX_EXIT> is active (see L</"$?"> below), the native VMS exit status value will have either one of the C<$!> or C<$?> or C<$^E> or the Unix value 255 encoded into it in a way that the effective original value can be decoded by other programs written in C, including Perl and the GNV package. As per the normal non-VMS behavior of C<die> if either C<$!> or C<$?> are non-zero, one of those values will be encoded into a native VMS status value. If both of the Unix status values are 0, and the C<$^E> value is set one of ERROR or SEVERE_ERROR severity, then the C<$^E> value will be used as the exit code as is. If none of the above apply, the Unix value of 255 will be encoded into a native VMS exit status value. Please note a significant difference in the behavior of C<die> in the C<PERL_VMS_POSIX_EXIT> mode is that it does not force a VMS SEVERE_ERROR status on exit. The Unix exit values of 2 through 255 will be encoded in VMS status values with severity levels of SUCCESS. The Unix exit value of 1 will be encoded in a VMS status value with a severity level of ERROR. This is to be compatible with how the VMS C library encodes these values. The minimum severity level set by C<die> in C<PERL_VMS_POSIX_EXIT> mode may be changed to be ERROR or higher in the future depending on the results of testing and further review. See L</"$?"> for a description of the encoding of the Unix value to produce a native VMS status containing it. =item dump Rather than causing Perl to abort and dump core, the C<dump> operator invokes the VMS debugger. If you continue to execute the Perl program under the debugger, control will be transferred to the label specified as the argument to C<dump>, or, if no label was specified, back to the beginning of the program. All other state of the program (I<e.g.> values of variables, open file handles) are not affected by calling C<dump>. =item exec LIST A call to C<exec> will cause Perl to exit, and to invoke the command given as an argument to C<exec> via C<lib$do_command>. If the argument begins with '@' or '$' (other than as part of a filespec), then it is executed as a DCL command. Otherwise, the first token on the command line is treated as the filespec of an image to run, and an attempt is made to invoke it (using F<.Exe> and the process defaults to expand the filespec) and pass the rest of C<exec>'s argument to it as parameters. If the token has no file type, and matches a file with null type, then an attempt is made to determine whether the file is an executable image which should be invoked using C<MCR> or a text file which should be passed to DCL as a command procedure. =item fork While in principle the C<fork> operator could be implemented via (and with the same rather severe limitations as) the CRTL C<vfork()> routine, and while some internal support to do just that is in place, the implementation has never been completed, making C<fork> currently unavailable. A true kernel C<fork()> is expected in a future version of VMS, and the pseudo-fork based on interpreter threads may be available in a future version of Perl on VMS (see L<perlfork>). In the meantime, use C<system>, backticks, or piped filehandles to create subprocesses. =item getpwent =item getpwnam =item getpwuid These operators obtain the information described in L<perlfunc>, if you have the privileges necessary to retrieve the named user's UAF information via C<sys$getuai>. If not, then only the C<$name>, C<$uid>, and C<$gid> items are returned. The C<$dir> item contains the login directory in VMS syntax, while the C<$comment> item contains the login directory in Unix syntax. The C<$gcos> item contains the owner field from the UAF record. The C<$quota> item is not used. =item gmtime The C<gmtime> operator will function properly if you have a working CRTL C<gmtime()> routine, or if the logical name SYS$TIMEZONE_DIFFERENTIAL is defined as the number of seconds which must be added to UTC to yield local time. (This logical name is defined automatically if you are running a version of VMS with built-in UTC support.) If neither of these cases is true, a warning message is printed, and C<undef> is returned. =item kill In most cases, C<kill> is implemented via the undocumented system service C<$SIGPRC>, which has the same calling sequence as C<$FORCEX>, but throws an exception in the target process rather than forcing it to call C<$EXIT>. Generally speaking, C<kill> follows the behavior of the CRTL's C<kill()> function, but unlike that function can be called from within a signal handler. Also, unlike the C<kill> in some versions of the CRTL, Perl's C<kill> checks the validity of the signal passed in and returns an error rather than attempting to send an unrecognized signal. Also, negative signal values don't do anything special under VMS; they're just converted to the corresponding positive value. =item qx// See the entry on C<backticks> above. =item select (system call) If Perl was not built with socket support, the system call version of C<select> is not available at all. If socket support is present, then the system call version of C<select> functions only for file descriptors attached to sockets. It will not provide information about regular files or pipes, since the CRTL C<select()> routine does not provide this functionality. =item stat EXPR Since VMS keeps track of files according to a different scheme than Unix, it's not really possible to represent the file's ID in the C<st_dev> and C<st_ino> fields of a C<struct stat>. Perl tries its best, though, and the values it uses are pretty unlikely to be the same for two different files. We can't guarantee this, though, so caveat scriptor. =item system LIST The C<system> operator creates a subprocess, and passes its arguments to the subprocess for execution as a DCL command. Since the subprocess is created directly via C<lib$spawn()>, any valid DCL command string may be specified. If the string begins with '@', it is treated as a DCL command unconditionally. Otherwise, if the first token contains a character used as a delimiter in file specification (e.g. C<:> or C<]>), an attempt is made to expand it using a default type of F<.Exe> and the process defaults, and if successful, the resulting file is invoked via C<MCR>. This allows you to invoke an image directly simply by passing the file specification to C<system>, a common Unixish idiom. If the token has no file type, and matches a file with null type, then an attempt is made to determine whether the file is an executable image which should be invoked using C<MCR> or a text file which should be passed to DCL as a command procedure. If LIST consists of the empty string, C<system> spawns an interactive DCL subprocess, in the same fashion as typing B<SPAWN> at the DCL prompt. Perl waits for the subprocess to complete before continuing execution in the current process. As described in L<perlfunc>, the return value of C<system> is a fake "status" which follows POSIX semantics unless the pragma C<use vmsish 'status'> is in effect; see the description of C<$?> in this document for more detail. =item time The value returned by C<time> is the offset in seconds from 01-JAN-1970 00:00:00 (just like the CRTL's times() routine), in order to make life easier for code coming in from the POSIX/Unix world. =item times The array returned by the C<times> operator is divided up according to the same rules the CRTL C<times()> routine. Therefore, the "system time" elements will always be 0, since there is no difference between "user time" and "system" time under VMS, and the time accumulated by a subprocess may or may not appear separately in the "child time" field, depending on whether C<times()> keeps track of subprocesses separately. Note especially that the VAXCRTL (at least) keeps track only of subprocesses spawned using C<fork()> and C<exec()>; it will not accumulate the times of subprocesses spawned via pipes, C<system()>, or backticks. =item unlink LIST C<unlink> will delete the highest version of a file only; in order to delete all versions, you need to say 1 while unlink LIST; You may need to make this change to scripts written for a Unix system which expect that after a call to C<unlink>, no files with the names passed to C<unlink> will exist. (Note: This can be changed at compile time; if you C<use Config> and C<$Config{'d_unlink_all_versions'}> is C<define>, then C<unlink> will delete all versions of a file on the first call.) C<unlink> will delete a file if at all possible, even if it requires changing file protection (though it won't try to change the protection of the parent directory). You can tell whether you've got explicit delete access to a file by using the C<VMS::Filespec::candelete> operator. For instance, in order to delete only files to which you have delete access, you could say something like sub safe_unlink { my($file,$num); foreach $file (@_) { next unless VMS::Filespec::candelete($file); $num += unlink $file; } $num; } (or you could just use C<VMS::Stdio::remove>, if you've installed the VMS::Stdio extension distributed with Perl). If C<unlink> has to change the file protection to delete the file, and you interrupt it in midstream, the file may be left intact, but with a changed ACL allowing you delete access. This behavior of C<unlink> is to be compatible with POSIX behavior and not traditional VMS behavior. =item utime LIST This operator changes only the modification time of the file (VMS revision date) on ODS-2 volumes and ODS-5 volumes without access dates enabled. On ODS-5 volumes with access dates enabled, the true access time is modified. =item waitpid PID,FLAGS If PID is a subprocess started by a piped C<open()> (see L<open>), C<waitpid> will wait for that subprocess, and return its final status value in C<$?>. If PID is a subprocess created in some other way (e.g. SPAWNed before Perl was invoked), C<waitpid> will simply check once per second whether the process has completed, and return when it has. (If PID specifies a process that isn't a subprocess of the current process, and you invoked Perl with the C<-w> switch, a warning will be issued.) Returns PID on success, -1 on error. The FLAGS argument is ignored in all cases. =back =head1 Perl variables The following VMS-specific information applies to the indicated "special" Perl variables, in addition to the general information in L<perlvar>. Where there is a conflict, this information takes precedence. =over 4 =item %ENV The operation of the C<%ENV> array depends on the translation of the logical name F<PERL_ENV_TABLES>. If defined, it should be a search list, each element of which specifies a location for C<%ENV> elements. If you tell Perl to read or set the element C<$ENV{>I<name>C<}>, then Perl uses the translations of F<PERL_ENV_TABLES> as follows: =over 4 =item CRTL_ENV This string tells Perl to consult the CRTL's internal C<environ> array of key-value pairs, using I<name> as the key. In most cases, this contains only a few keys, but if Perl was invoked via the C C<exec[lv]e()> function, as is the case for some embedded Perl applications or when running under a shell such as GNV bash, the C<environ> array may have been populated by the calling program. =item CLISYM_[LOCAL] A string beginning with C<CLISYM_>tells Perl to consult the CLI's symbol tables, using I<name> as the name of the symbol. When reading an element of C<%ENV>, the local symbol table is scanned first, followed by the global symbol table.. The characters following C<CLISYM_> are significant when an element of C<%ENV> is set or deleted: if the complete string is C<CLISYM_LOCAL>, the change is made in the local symbol table; otherwise the global symbol table is changed. =item Any other string If an element of F<PERL_ENV_TABLES> translates to any other string, that string is used as the name of a logical name table, which is consulted using I<name> as the logical name. The normal search order of access modes is used. =back F<PERL_ENV_TABLES> is translated once when Perl starts up; any changes you make while Perl is running do not affect the behavior of C<%ENV>. If F<PERL_ENV_TABLES> is not defined, then Perl defaults to consulting first the logical name tables specified by F<LNM$FILE_DEV>, and then the CRTL C<environ> array. This default order is reversed when the logical name F<GNV$UNIX_SHELL> is defined, such as when running under GNV bash. For operations on %ENV entries based on logical names or DCL symbols, the key string is treated as if it were entirely uppercase, regardless of the case actually specified in the Perl expression. Entries in %ENV based on the CRTL's environ array preserve the case of the key string when stored, and lookups are case sensitive. When an element of C<%ENV> is read, the locations to which F<PERL_ENV_TABLES> points are checked in order, and the value obtained from the first successful lookup is returned. If the name of the C<%ENV> element contains a semi-colon, it and any characters after it are removed. These are ignored when the CRTL C<environ> array or a CLI symbol table is consulted. However, the name is looked up in a logical name table, the suffix after the semi-colon is treated as the translation index to be used for the lookup. This lets you look up successive values for search list logical names. For instance, if you say $ Define STORY once,upon,a,time,there,was $ perl -e "for ($i = 0; $i <= 6; $i++) " - _$ -e "{ print $ENV{'story;'.$i},' '}" Perl will print C<ONCE UPON A TIME THERE WAS>, assuming, of course, that F<PERL_ENV_TABLES> is set up so that the logical name C<story> is found, rather than a CLI symbol or CRTL C<environ> element with the same name. When an element of C<%ENV> is set to a defined string, the corresponding definition is made in the location to which the first translation of F<PERL_ENV_TABLES> points. If this causes a logical name to be created, it is defined in supervisor mode. (The same is done if an existing logical name was defined in executive or kernel mode; an existing user or supervisor mode logical name is reset to the new value.) If the value is an empty string, the logical name's translation is defined as a single C<NUL> (ASCII C<\0>) character, since a logical name cannot translate to a zero-length string. (This restriction does not apply to CLI symbols or CRTL C<environ> values; they are set to the empty string.) When an element of C<%ENV> is set to C<undef>, the element is looked up as if it were being read, and if it is found, it is deleted. (An item "deleted" from the CRTL C<environ> array is set to the empty string.) Using C<delete> to remove an element from C<%ENV> has a similar effect, but after the element is deleted, another attempt is made to look up the element, so an inner-mode logical name or a name in another location will replace the logical name just deleted. In either case, only the first value found searching PERL_ENV_TABLES is altered. It is not possible at present to define a search list logical name via %ENV. The element C<$ENV{DEFAULT}> is special: when read, it returns Perl's current default device and directory, and when set, it resets them, regardless of the definition of F<PERL_ENV_TABLES>. It cannot be cleared or deleted; attempts to do so are silently ignored. Note that if you want to pass on any elements of the C-local environ array to a subprocess which isn't started by fork/exec, or isn't running a C program, you can "promote" them to logical names in the current process, which will then be inherited by all subprocesses, by saying foreach my $key (qw[C-local keys you want promoted]) { my $temp = $ENV{$key}; # read from C-local array $ENV{$key} = $temp; # and define as logical name } (You can't just say C<$ENV{$key} = $ENV{$key}>, since the Perl optimizer is smart enough to elide the expression.) Don't try to clear C<%ENV> by saying C<%ENV = ();>, it will throw a fatal error. This is equivalent to doing the following from DCL: DELETE/LOGICAL * You can imagine how bad things would be if, for example, the SYS$MANAGER or SYS$SYSTEM logical names were deleted. At present, the first time you iterate over %ENV using C<keys>, or C<values>, you will incur a time penalty as all logical names are read, in order to fully populate %ENV. Subsequent iterations will not reread logical names, so they won't be as slow, but they also won't reflect any changes to logical name tables caused by other programs. You do need to be careful with the logical names representing process-permanent files, such as C<SYS$INPUT> and C<SYS$OUTPUT>. The translations for these logical names are prepended with a two-byte binary value (0x1B 0x00) that needs to be stripped off if you want to use it. (In previous versions of Perl it wasn't possible to get the values of these logical names, as the null byte acted as an end-of-string marker) =item $! The string value of C<$!> is that returned by the CRTL's strerror() function, so it will include the VMS message for VMS-specific errors. The numeric value of C<$!> is the value of C<errno>, except if errno is EVMSERR, in which case C<$!> contains the value of vaxc$errno. Setting C<$!> always sets errno to the value specified. If this value is EVMSERR, it also sets vaxc$errno to 4 (NONAME-F-NOMSG), so that the string value of C<$!> won't reflect the VMS error message from before C<$!> was set. =item $^E This variable provides direct access to VMS status values in vaxc$errno, which are often more specific than the generic Unix-style error messages in C<$!>. Its numeric value is the value of vaxc$errno, and its string value is the corresponding VMS message string, as retrieved by sys$getmsg(). Setting C<$^E> sets vaxc$errno to the value specified. While Perl attempts to keep the vaxc$errno value to be current, if errno is not EVMSERR, it may not be from the current operation. =item $? The "status value" returned in C<$?> is synthesized from the actual exit status of the subprocess in a way that approximates POSIX wait(5) semantics, in order to allow Perl programs to portably test for successful completion of subprocesses. The low order 8 bits of C<$?> are always 0 under VMS, since the termination status of a process may or may not have been generated by an exception. The next 8 bits contain the termination status of the program. If the child process follows the convention of C programs compiled with the _POSIX_EXIT macro set, the status value will contain the actual value of 0 to 255 returned by that program on a normal exit. With the _POSIX_EXIT macro set, the Unix exit value of zero is represented as a VMS native status of 1, and the Unix values from 2 to 255 are encoded by the equation: VMS_status = 0x35a000 + (unix_value * 8) + 1. And in the special case of Unix value 1 the encoding is: VMS_status = 0x35a000 + 8 + 2 + 0x10000000. For other termination statuses, the severity portion of the subprocess's exit status is used: if the severity was success or informational, these bits are all 0; if the severity was warning, they contain a value of 1; if the severity was error or fatal error, they contain the actual severity bits, which turns out to be a value of 2 for error and 4 for severe_error. Fatal is another term for the severe_error status. As a result, C<$?> will always be zero if the subprocess's exit status indicated successful completion, and non-zero if a warning or error occurred or a program compliant with encoding _POSIX_EXIT values was run and set a status. How can you tell the difference between a non-zero status that is the result of a VMS native error status or an encoded Unix status? You can not unless you look at the ${^CHILD_ERROR_NATIVE} value. The ${^CHILD_ERROR_NATIVE} value returns the actual VMS status value and check the severity bits. If the severity bits are equal to 1, then if the numeric value for C<$?> is between 2 and 255 or 0, then C<$?> accurately reflects a value passed back from a Unix application. If C<$?> is 1, and the severity bits indicate a VMS error (2), then C<$?> is from a Unix application exit value. In practice, Perl scripts that call programs that return _POSIX_EXIT type status values will be expecting those values, and programs that call traditional VMS programs will either be expecting the previous behavior or just checking for a non-zero status. And success is always the value 0 in all behaviors. When the actual VMS termination status of the child is an error, internally the C<$!> value will be set to the closest Unix errno value to that error so that Perl scripts that test for error messages will see the expected Unix style error message instead of a VMS message. Conversely, when setting C<$?> in an END block, an attempt is made to convert the POSIX value into a native status intelligible to the operating system upon exiting Perl. What this boils down to is that setting C<$?> to zero results in the generic success value SS$_NORMAL, and setting C<$?> to a non-zero value results in the generic failure status SS$_ABORT. See also L<perlport/exit>. With the C<PERL_VMS_POSIX_EXIT> logical name defined as "ENABLE", setting C<$?> will cause the new value to be encoded into C<$^E> so that either the original parent or child exit status values 0 to 255 can be automatically recovered by C programs expecting _POSIX_EXIT behavior. If both a parent and a child exit value are non-zero, then it will be assumed that this is actually a VMS native status value to be passed through. The special value of 0xFFFF is almost a NOOP as it will cause the current native VMS status in the C library to become the current native Perl VMS status, and is handled this way as it is known to not be a valid native VMS status value. It is recommend that only values in the range of normal Unix parent or child status numbers, 0 to 255 are used. The pragma C<use vmsish 'status'> makes C<$?> reflect the actual VMS exit status instead of the default emulation of POSIX status described above. This pragma also disables the conversion of non-zero values to SS$_ABORT when setting C<$?> in an END block (but zero will still be converted to SS$_NORMAL). Do not use the pragma C<use vmsish 'status'> with C<PERL_VMS_POSIX_EXIT> enabled, as they are at times requesting conflicting actions and the consequence of ignoring this advice will be undefined to allow future improvements in the POSIX exit handling. In general, with C<PERL_VMS_POSIX_EXIT> enabled, more detailed information will be available in the exit status for DCL scripts or other native VMS tools, and will give the expected information for Posix programs. It has not been made the default in order to preserve backward compatibility. N.B. Setting C<DECC$FILENAME_UNIX_REPORT> implicitly enables C<PERL_VMS_POSIX_EXIT>. =item $| Setting C<$|> for an I/O stream causes data to be flushed all the way to disk on each write (I<i.e.> not just to the underlying RMS buffers for a file). In other words, it's equivalent to calling fflush() and fsync() from C. =back =head1 Standard modules with VMS-specific differences =head2 SDBM_File SDBM_File works properly on VMS. It has, however, one minor difference. The database directory file created has a F<.sdbm_dir> extension rather than a F<.dir> extension. F<.dir> files are VMS filesystem directory files, and using them for other purposes could cause unacceptable problems. =head1 Revision date Please see the git repository for revision history. =head1 AUTHOR Charles Bailey bailey@cor.newman.upenn.edu Craig Berry craigberry@mac.com Dan Sugalski dan@sidhe.org John Malmberg wb8tyw@qsl.net perlcn.pod 0000644 00000011233 15125556335 0006545 0 ustar 00 =encoding utf8 如果你用一般的文字编辑器阅览这份文件, 请忽略文中奇特的注记字符. 这份文件是以 POD (简明文件格式) 写成; 这种格式是为了能让人直接阅读, 而特别设计的. 关于此格式的进一步信息, 请参考 perlpod 线上文件. =head1 NAME perlcn - 简体中文 Perl 指南 =head1 DESCRIPTION 欢迎来到 Perl 的天地! 从 5.8.0 版开始, Perl 具备了完善的 Unicode (统一码) 支援, 也连带支援了许多拉丁语系以外的编码方式; CJK (中日韩) 便是其中的一部份. Unicode 是国际性的标准, 试图涵盖世界上所有的字符: 西方世界, 东方世界, 以及两者间的一切 (希腊文, 叙利亚文, 亚拉伯文, 希伯来文, 印度文, 印地安文, 等等). 它也容纳了多种作业系统与平台 (如 PC 及麦金塔). Perl 本身以 Unicode 进行操作. 这表示 Perl 内部的字符串数据可用 Unicode 表示; Perl 的函式与算符 (例如正规表示式比对) 也能对 Unicode 进行操作. 在输入及输出时, 为了处理以 Unicode 之前的编码方式存放的数据, Perl 提供了 Encode 这个模块, 可以让你轻易地读取及写入旧有的编码数据. Encode 延伸模块支援下列简体中文的编码方式 ('gb2312' 表示 'euc-cn'): euc-cn Unix 延伸字符集, 也就是俗称的国标码 gb2312-raw 未经处理的 (低比特) GB2312 字符表 gb12345 未经处理的中国用繁体中文编码 iso-ir-165 GB2312 + GB6345 + GB8565 + 新增字符 cp936 字码页 936, 也可以用 'GBK' (扩充国标码) 指明 hz 7 比特逸出式 GB2312 编码 举例来说, 将 EUC-CN 编码的档案转成 Unicode, 祗需键入下列指令: perl -Mencoding=euc-cn,STDOUT,utf8 -pe1 < file.euc-cn > file.utf8 Perl 也内附了 "piconv", 一支完全以 Perl 写成的字符转换工具程序, 用法如下: piconv -f euc-cn -t utf8 < file.euc-cn > file.utf8 piconv -f utf8 -t euc-cn < file.utf8 > file.euc-cn 另外, 利用 encoding 模块, 你可以轻易写出以字符为单位的程序码, 如下所示: #!/usr/bin/env perl # 启动 euc-cn 字串解析; 标准输出入及标准错误都设为 euc-cn 编码 use encoding 'euc-cn', STDIN => 'euc-cn', STDOUT => 'euc-cn'; print length("骆驼"); # 2 (双引号表示字符) print length('骆驼'); # 4 (单引号表示字节) print index("谆谆教诲", "蛔唤"); # -1 (不包含此子字符串) print index('谆谆教诲', '蛔唤'); # 1 (从第二个字节开始) 在最后一列例子里, "谆" 的第二个字节与 "谆" 的第一个字节结合成 EUC-CN 码的 "蛔"; "谆" 的第二个字节则与 "教" 的第一个字节结合成 "唤". 这解决了以前 EUC-CN 码比对处理上常见的问题. =head2 额外的中文编码 如果需要更多的中文编码, 可以从 CPAN (L<https://www.cpan.org/>) 下载 Encode::HanExtra 模块. 它目前提供下列编码方式: gb18030 扩充过的国标码, 包含繁体中文 另外, Encode::HanConvert 模块则提供了简繁转换用的两种编码: big5-simp Big5 繁体中文与 Unicode 简体中文互转 gbk-trad GBK 简体中文与 Unicode 繁体中文互转 若想在 GBK 与 Big5 之间互转, 请参考该模块内附的 b2g.pl 与 g2b.pl 两支程序, 或在程序内使用下列写法: use Encode::HanConvert; $euc_cn = big5_to_gb($big5); # 从 Big5 转为 GBK $big5 = gb_to_big5($euc_cn); # 从 GBK 转为 Big5 =head2 进一步的信息 请参考 Perl 内附的大量说明文件 (不幸全是用英文写的), 来学习更多关于 Perl 的知识, 以及 Unicode 的使用方式. 不过, 外部的资源相当丰富: =head2 提供 Perl 资源的网址 =over 4 =item L<https://www.perl.org/> =back Perl 的首页 =over 4 =item L<https://www.perl.com/> 由 Perl 基金会所营运的文章辑录 =item L<https://www.cpan.org/> Perl 综合典藏网 (Comprehensive Perl Archive Network) =item L<https://lists.perl.org/> Perl 邮递论坛一览 =back =head2 学习 Perl 的网址 =over 4 =item L<http://www.oreilly.com.cn/index.php?func=booklist&cat=68> 简体中文版的欧莱礼 Perl 书藉 =back =head2 Perl 使用者集会 =over 4 =item L<https://www.pm.org/groups/asia.html> 中国 Perl 推广组一览 =back =head2 Unicode 相关网址 =over 4 =item L<https://www.unicode.org/> Unicode 学术学会 (Unicode 标准的制定者) =item L<https://www.cl.cam.ac.uk/%7Emgk25/unicode.html> Unix/Linux 上的 UTF-8 及 Unicode 答客问 =back =head1 SEE ALSO L<Encode>, L<Encode::CN>, L<encoding>, L<perluniintro>, L<perlunicode> =head1 AUTHORS Jarkko Hietaniemi E<lt>jhi@iki.fiE<gt> Audrey Tang (唐凤) E<lt>audreyt@audreyt.orgE<gt> =cut perlnetware.pod 0000644 00000014770 15125556335 0007623 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specifically designed to be readable as is. =head1 NAME perlnetware - Perl for NetWare =head1 DESCRIPTION This file gives instructions for building Perl 5.7 and above, and also Perl modules for NetWare. Before you start, you may want to read the README file found in the top level directory into which the Perl source code distribution was extracted. Make sure you read and understand the terms under which the software is being distributed. =head1 BUILD This section describes the steps to be performed to build a Perl NLM and other associated NLMs. =head2 Tools & SDK The build requires CodeWarrior compiler and linker. In addition, the "NetWare SDK", "NLM & NetWare Libraries for C" and "NetWare Server Protocol Libraries for C", all available at L<http://developer.novell.com/wiki/index.php/Category:Novell_Developer_Kit>, are required. Microsoft Visual C++ version 4.2 or later is also required. =head2 Setup The build process is dependent on the location of the NetWare SDK. Once the Tools & SDK are installed, the build environment has to be setup. The following batch files setup the environment. =over 4 =item SetNWBld.bat The Execution of this file takes 2 parameters as input. The first being the NetWare SDK path, second being the path for CodeWarrior Compiler & tools. Execution of this file sets these paths and also sets the build type to Release by default. =item Buildtype.bat This is used to set the build type to debug or release. Change the build type only after executing SetNWBld.bat Example: =over =item 1. Typing "buildtype d on" at the command prompt causes the buildtype to be set to Debug type with D2 flag set. =item 2. Typing "buildtype d off" or "buildtype d" at the command prompt causes the buildtype to be set to Debug type with D1 flag set. =item 3. Typing "buildtype r" at the command prompt sets it to Release Build type. =back =back =head2 Make The make process runs only under WinNT shell. The NetWare makefile is located under the NetWare folder. This makes use of miniperl.exe to run some of the Perl scripts. To create miniperl.exe, first set the required paths for Visual c++ compiler (specify vcvars32 location) at the command prompt. Then run nmake from win32 folder through WinNT command prompt. The build process can be stopped after miniperl.exe is created. Then run nmake from NetWare folder through WinNT command prompt. Currently the following two build types are tested on NetWare: =over 4 =item * USE_MULTI, USE_ITHREADS & USE_IMP_SYS defined =item * USE_MULTI & USE_IMP_SYS defined and USE_ITHREADS not defined =back =head2 Interpreter Once miniperl.exe creation is over, run nmake from the NetWare folder. This will build the Perl interpreter for NetWare as I<perl.nlm>. This is copied under the I<Release> folder if you are doing a release build, else will be copied under I<Debug> folder for debug builds. =head2 Extensions The make process also creates the Perl extensions as I<<Extension>.nlm> =head1 INSTALL To install NetWare Perl onto a NetWare server, first map the Sys volume of a NetWare server to I<i:>. This is because the makefile by default sets the drive letter to I<i:>. Type I<nmake nwinstall> from NetWare folder on a WinNT command prompt. This will copy the binaries and module files onto the NetWare server under I<sys:\Perl> folder. The Perl interpreter, I<perl.nlm>, is copied under I<sys:\perl\system> folder. Copy this to I<sys:\system> folder. Example: At the command prompt Type "nmake nwinstall". This will install NetWare Perl on the NetWare Server. Similarly, if you type "nmake install", this will cause the binaries to be installed on the local machine. (Typically under the c:\perl folder) =head1 BUILD NEW EXTENSIONS To build extensions other than standard extensions, NetWare Perl has to be installed on Windows along with Windows Perl. The Perl for Windows can be either downloaded from the CPAN site and built using the sources, or the binaries can be directly downloaded from the ActiveState site. Installation can be done by invoking I<nmake install> from the NetWare folder on a WinNT command prompt after building NetWare Perl by following steps given above. This will copy all the *.pm files and other required files. Documentation files are not copied. Thus one must first install Windows Perl, Then install NetWare Perl. Once this is done, do the following to build any extension: =over 4 =item * Change to the extension directory where its source files are present. =item * Run the following command at the command prompt: perl -II<path to NetWare lib dir> -II<path to lib> Makefile.pl Example: perl -Ic:/perl/5.6.1/lib/NetWare-x86-multi-thread \ -Ic:\perl\5.6.1\lib MakeFile.pl or perl -Ic:/perl/5.8.0/lib/NetWare-x86-multi-thread \ -Ic:\perl\5.8.0\lib MakeFile.pl =item * nmake =item * nmake install Install will copy the files into the Windows machine where NetWare Perl is installed and these files may have to be copied to the NetWare server manually. Alternatively, pass I<INSTALLSITELIB=i:\perl\lib> as an input to makefile.pl above. Here I<i:> is the mapped drive to the sys: volume of the server where Perl on NetWare is installed. Now typing I<nmake install>, will copy the files onto the NetWare server. Example: You can execute the following on the command prompt. perl -Ic:/perl/5.6.1/lib/NetWare-x86-multi-thread \ -Ic:\perl\5.6.1\lib MakeFile.pl INSTALLSITELIB=i:\perl\lib or perl -Ic:/perl/5.8.0/lib/NetWare-x86-multi-thread \ -Ic:\perl\5.8.0\lib MakeFile.pl INSTALLSITELIB=i:\perl\lib =item * Note: Some modules downloaded from CPAN may require NetWare related API in order to build on NetWare. Other modules may however build smoothly with or without minor changes depending on the type of module. =back =head1 ACKNOWLEDGEMENTS The makefile for Win32 is used as a reference to create the makefile for NetWare. Also, the make process for NetWare port uses miniperl.exe to run scripts during the make and installation process. =head1 AUTHORS Anantha Kesari H Y (hyanantha@novell.com) Aditya C (caditya@novell.com) =head1 DATE =over 4 =item * Created - 18 Jan 2001 =item * Modified - 25 June 2001 =item * Modified - 13 July 2001 =item * Modified - 28 May 2002 =back perlmodlib.pod 0000644 00000225074 15125556335 0007425 0 ustar 00 -*- buffer-read-only: t -*- !!!!!!! DO NOT EDIT THIS FILE !!!!!!! This file is built by pod/perlmodlib.PL extracting documentation from the Perl source files. Any changes made here will be lost! =head1 NAME perlmodlib - constructing new Perl modules and finding existing ones =head1 THE PERL MODULE LIBRARY Many modules are included in the Perl distribution. These are described below, and all end in F<.pm>. You may discover compiled library files (usually ending in F<.so>) or small pieces of modules to be autoloaded (ending in F<.al>); these were automatically generated by the installation process. You may also discover files in the library directory that end in either F<.pl> or F<.ph>. These are old libraries supplied so that old programs that use them still run. The F<.pl> files will all eventually be converted into standard modules, and the F<.ph> files made by B<h2ph> will probably end up as extension modules made by B<h2xs>. (Some F<.ph> values may already be available through the POSIX, Errno, or Fcntl modules.) The B<pl2pm> file in the distribution may help in your conversion, but it's just a mechanical process and therefore far from bulletproof. =head2 Pragmatic Modules They work somewhat like compiler directives (pragmata) in that they tend to affect the compilation of your program, and thus will usually work well only when used within a C<use>, or C<no>. Most of these are lexically scoped, so an inner BLOCK may countermand them by saying: no integer; no strict 'refs'; no warnings; which lasts until the end of that BLOCK. Some pragmas are lexically scoped--typically those that affect the C<$^H> hints variable. Others affect the current package instead, like C<use vars> and C<use subs>, which allow you to predeclare a variables or subroutines within a particular I<file> rather than just a block. Such declarations are effective for the entire file for which they were declared. You cannot rescind them with C<no vars> or C<no subs>. The following pragmas are defined (and have their own documentation). =over 12 =item attributes Get/set subroutine or variable attributes =item autodie Replace functions with ones that succeed or die with lexical scope =item autodie::exception Exceptions from autodying functions. =item autodie::exception::system Exceptions from autodying system(). =item autodie::hints Provide hints about user subroutines to autodie =item autodie::skip Skip a package when throwing autodie exceptions =item autouse Postpone load of modules until a function is used =item base Establish an ISA relationship with base classes at compile time =item bigint Transparent BigInteger support for Perl =item bignum Transparent BigNumber support for Perl =item bigrat Transparent BigNumber/BigRational support for Perl =item blib Use MakeMaker's uninstalled version of a package =item bytes Expose the individual bytes of characters =item charnames Access to Unicode character names and named character sequences; also define character names =item constant Declare constants =item deprecate Perl pragma for deprecating the inclusion of a module in core =item diagnostics Produce verbose warning diagnostics =item encoding Allows you to write your script in non-ASCII and non-UTF-8 =item encoding::warnings Warn on implicit encoding conversions =item experimental Experimental features made easy =item feature Enable new features =item fields Compile-time class fields =item filetest Control the filetest permission operators =item if C<use> a Perl module if a condition holds =item integer Use integer arithmetic instead of floating point =item less Request less of something =item lib Manipulate @INC at compile time =item locale Use or avoid POSIX locales for built-in operations =item mro Method Resolution Order =item ok Alternative to Test::More::use_ok =item open Set default PerlIO layers for input and output =item ops Restrict unsafe operations when compiling =item overload Package for overloading Perl operations =item overloading Lexically control overloading =item parent Establish an ISA relationship with base classes at compile time =item re Alter regular expression behaviour =item sigtrap Enable simple signal handling =item sort Control sort() behaviour =item strict Restrict unsafe constructs =item subs Predeclare subroutine names =item threads Perl interpreter-based threads =item threads::shared Perl extension for sharing data structures between threads =item utf8 Enable/disable UTF-8 (or UTF-EBCDIC) in source code =item vars Predeclare global variable names =item version Perl extension for Version Objects =item vmsish Control VMS-specific language features =item warnings Control optional warnings =item warnings::register Warnings import function =back =head2 Standard Modules Standard, bundled modules are all expected to behave in a well-defined manner with respect to namespace pollution because they use the Exporter module. See their own documentation for details. It's possible that not all modules listed below are installed on your system. For example, the GDBM_File module will not be installed if you don't have the gdbm library. =over 12 =item Amiga::ARexx Perl extension for ARexx support =item Amiga::Exec Perl extension for low level amiga support =item AnyDBM_File Provide framework for multiple DBMs =item App::Cpan Easily interact with CPAN from the command line =item App::Prove Implements the C<prove> command. =item App::Prove::State State storage for the C<prove> command. =item App::Prove::State::Result Individual test suite results. =item App::Prove::State::Result::Test Individual test results. =item Archive::Tar Module for manipulations of tar archives =item Archive::Tar::File A subclass for in-memory extracted file from Archive::Tar =item Attribute::Handlers Simpler definition of attribute handlers =item AutoLoader Load subroutines only on demand =item AutoSplit Split a package for autoloading =item B The Perl Compiler Backend =item B::Concise Walk Perl syntax tree, printing concise info about ops =item B::Deparse Perl compiler backend to produce perl code =item B::Op_private OP op_private flag definitions =item B::Showlex Show lexical variables used in functions or files =item B::Terse Walk Perl syntax tree, printing terse info about ops =item B::Xref Generates cross reference reports for Perl programs =item Benchmark Benchmark running times of Perl code =item C<IO::Socket::IP> Family-neutral IP socket supporting both IPv4 and IPv6 =item C<Socket> Networking constants and support functions =item CORE Namespace for Perl's core routines =item CPAN Query, download and build perl modules from CPAN sites =item CPAN::API::HOWTO A recipe book for programming with CPAN.pm =item CPAN::Debug Internal debugging for CPAN.pm =item CPAN::Distroprefs Read and match distroprefs =item CPAN::FirstTime Utility for CPAN::Config file Initialization =item CPAN::HandleConfig Internal configuration handling for CPAN.pm =item CPAN::Kwalify Interface between CPAN.pm and Kwalify.pm =item CPAN::Meta The distribution metadata for a CPAN dist =item CPAN::Meta::Converter Convert CPAN distribution metadata structures =item CPAN::Meta::Feature An optional feature provided by a CPAN distribution =item CPAN::Meta::History History of CPAN Meta Spec changes =item CPAN::Meta::History::Meta_1_0 Version 1.0 metadata specification for META.yml =item CPAN::Meta::History::Meta_1_1 Version 1.1 metadata specification for META.yml =item CPAN::Meta::History::Meta_1_2 Version 1.2 metadata specification for META.yml =item CPAN::Meta::History::Meta_1_3 Version 1.3 metadata specification for META.yml =item CPAN::Meta::History::Meta_1_4 Version 1.4 metadata specification for META.yml =item CPAN::Meta::Merge Merging CPAN Meta fragments =item CPAN::Meta::Prereqs A set of distribution prerequisites by phase and type =item CPAN::Meta::Requirements A set of version requirements for a CPAN dist =item CPAN::Meta::Spec Specification for CPAN distribution metadata =item CPAN::Meta::Validator Validate CPAN distribution metadata structures =item CPAN::Meta::YAML Read and write a subset of YAML for CPAN Meta files =item CPAN::Nox Wrapper around CPAN.pm without using any XS module =item CPAN::Plugin Base class for CPAN shell extensions =item CPAN::Plugin::Specfile Proof of concept implementation of a trivial CPAN::Plugin =item CPAN::Queue Internal queue support for CPAN.pm =item CPAN::Tarzip Internal handling of tar archives for CPAN.pm =item CPAN::Version Utility functions to compare CPAN versions =item Carp Alternative warn and die for modules =item Class::Struct Declare struct-like datatypes as Perl classes =item Compress::Raw::Bzip2 Low-Level Interface to bzip2 compression library =item Compress::Raw::Zlib Low-Level Interface to zlib compression library =item Compress::Zlib Interface to zlib compression library =item Config Access Perl configuration information =item Config::Extensions Hash lookup of which core extensions were built. =item Config::Perl::V Structured data retrieval of perl -V output =item Cwd Get pathname of current working directory =item DB Programmatic interface to the Perl debugging API =item DBM_Filter Filter DBM keys/values =item DBM_Filter::compress Filter for DBM_Filter =item DBM_Filter::encode Filter for DBM_Filter =item DBM_Filter::int32 Filter for DBM_Filter =item DBM_Filter::null Filter for DBM_Filter =item DBM_Filter::utf8 Filter for DBM_Filter =item DB_File Perl5 access to Berkeley DB version 1.x =item Data::Dumper Stringified perl data structures, suitable for both printing and C<eval> =item Devel::PPPort Perl/Pollution/Portability =item Devel::Peek A data debugging tool for the XS programmer =item Devel::SelfStubber Generate stubs for a SelfLoading module =item Digest Modules that calculate message digests =item Digest::MD5 Perl interface to the MD5 Algorithm =item Digest::SHA Perl extension for SHA-1/224/256/384/512 =item Digest::base Digest base class =item Digest::file Calculate digests of files =item DirHandle (obsolete) supply object methods for directory handles =item Dumpvalue Provides screen dump of Perl data. =item DynaLoader Dynamically load C libraries into Perl code =item Encode Character encodings in Perl =item Encode::Alias Alias definitions to encodings =item Encode::Byte Single Byte Encodings =item Encode::CJKConstants Internally used by Encode::??::ISO_2022_* =item Encode::CN China-based Chinese Encodings =item Encode::CN::HZ Internally used by Encode::CN =item Encode::Config Internally used by Encode =item Encode::EBCDIC EBCDIC Encodings =item Encode::Encoder Object Oriented Encoder =item Encode::Encoding Encode Implementation Base Class =item Encode::GSM0338 ESTI GSM 03.38 Encoding =item Encode::Guess Guesses encoding from data =item Encode::JP Japanese Encodings =item Encode::JP::H2Z Internally used by Encode::JP::2022_JP* =item Encode::JP::JIS7 Internally used by Encode::JP =item Encode::KR Korean Encodings =item Encode::KR::2022_KR Internally used by Encode::KR =item Encode::MIME::Header MIME encoding for an unstructured email header =item Encode::MIME::Name Internally used by Encode =item Encode::PerlIO A detailed document on Encode and PerlIO =item Encode::Supported Encodings supported by Encode =item Encode::Symbol Symbol Encodings =item Encode::TW Taiwan-based Chinese Encodings =item Encode::Unicode Various Unicode Transformation Formats =item Encode::Unicode::UTF7 UTF-7 encoding =item English Use nice English (or awk) names for ugly punctuation variables =item Env Perl module that imports environment variables as scalars or arrays =item Errno System errno constants =item Exporter Implements default import method for modules =item Exporter::Heavy Exporter guts =item ExtUtils::CBuilder Compile and link C code for Perl modules =item ExtUtils::CBuilder::Platform::Windows Builder class for Windows platforms =item ExtUtils::Command Utilities to replace common UNIX commands in Makefiles etc. =item ExtUtils::Command::MM Commands for the MM's to use in Makefiles =item ExtUtils::Constant Generate XS code to import C header constants =item ExtUtils::Constant::Base Base class for ExtUtils::Constant objects =item ExtUtils::Constant::Utils Helper functions for ExtUtils::Constant =item ExtUtils::Constant::XS Generate C code for XS modules' constants. =item ExtUtils::Embed Utilities for embedding Perl in C/C++ applications =item ExtUtils::Install Install files from here to there =item ExtUtils::Installed Inventory management of installed modules =item ExtUtils::Liblist Determine libraries to use and how to use them =item ExtUtils::MM OS adjusted ExtUtils::MakeMaker subclass =item ExtUtils::MM::Utils ExtUtils::MM methods without dependency on ExtUtils::MakeMaker =item ExtUtils::MM_AIX AIX specific subclass of ExtUtils::MM_Unix =item ExtUtils::MM_Any Platform-agnostic MM methods =item ExtUtils::MM_BeOS Methods to override UN*X behaviour in ExtUtils::MakeMaker =item ExtUtils::MM_Cygwin Methods to override UN*X behaviour in ExtUtils::MakeMaker =item ExtUtils::MM_DOS DOS specific subclass of ExtUtils::MM_Unix =item ExtUtils::MM_Darwin Special behaviors for OS X =item ExtUtils::MM_MacOS Once produced Makefiles for MacOS Classic =item ExtUtils::MM_NW5 Methods to override UN*X behaviour in ExtUtils::MakeMaker =item ExtUtils::MM_OS2 Methods to override UN*X behaviour in ExtUtils::MakeMaker =item ExtUtils::MM_QNX QNX specific subclass of ExtUtils::MM_Unix =item ExtUtils::MM_UWIN U/WIN specific subclass of ExtUtils::MM_Unix =item ExtUtils::MM_Unix Methods used by ExtUtils::MakeMaker =item ExtUtils::MM_VMS Methods to override UN*X behaviour in ExtUtils::MakeMaker =item ExtUtils::MM_VOS VOS specific subclass of ExtUtils::MM_Unix =item ExtUtils::MM_Win32 Methods to override UN*X behaviour in ExtUtils::MakeMaker =item ExtUtils::MM_Win95 Method to customize MakeMaker for Win9X =item ExtUtils::MY ExtUtils::MakeMaker subclass for customization =item ExtUtils::MakeMaker Create a module Makefile =item ExtUtils::MakeMaker::Config Wrapper around Config.pm =item ExtUtils::MakeMaker::FAQ Frequently Asked Questions About MakeMaker =item ExtUtils::MakeMaker::Locale Bundled Encode::Locale =item ExtUtils::MakeMaker::Tutorial Writing a module with MakeMaker =item ExtUtils::Manifest Utilities to write and check a MANIFEST file =item ExtUtils::Miniperl Write the C code for miniperlmain.c and perlmain.c =item ExtUtils::Mkbootstrap Make a bootstrap file for use by DynaLoader =item ExtUtils::Mksymlists Write linker options files for dynamic extension =item ExtUtils::Packlist Manage .packlist files =item ExtUtils::ParseXS Converts Perl XS code into C code =item ExtUtils::ParseXS::Constants Initialization values for some globals =item ExtUtils::ParseXS::Eval Clean package to evaluate code in =item ExtUtils::ParseXS::Utilities Subroutines used with ExtUtils::ParseXS =item ExtUtils::Typemaps Read/Write/Modify Perl/XS typemap files =item ExtUtils::Typemaps::Cmd Quick commands for handling typemaps =item ExtUtils::Typemaps::InputMap Entry in the INPUT section of a typemap =item ExtUtils::Typemaps::OutputMap Entry in the OUTPUT section of a typemap =item ExtUtils::Typemaps::Type Entry in the TYPEMAP section of a typemap =item ExtUtils::XSSymSet Keep sets of symbol names palatable to the VMS linker =item ExtUtils::testlib Add blib/* directories to @INC =item Fatal Replace functions with equivalents which succeed or die =item Fcntl Load the C Fcntl.h defines =item File::Basename Parse file paths into directory, filename and suffix. =item File::Compare Compare files or filehandles =item File::Copy Copy files or filehandles =item File::DosGlob DOS like globbing and then some =item File::Fetch A generic file fetching mechanism =item File::Find Traverse a directory tree. =item File::Glob Perl extension for BSD glob routine =item File::GlobMapper Extend File Glob to Allow Input and Output Files =item File::Path Create or remove directory trees =item File::Spec Portably perform operations on file names =item File::Spec::AmigaOS File::Spec for AmigaOS =item File::Spec::Cygwin Methods for Cygwin file specs =item File::Spec::Epoc Methods for Epoc file specs =item File::Spec::Functions Portably perform operations on file names =item File::Spec::Mac File::Spec for Mac OS (Classic) =item File::Spec::OS2 Methods for OS/2 file specs =item File::Spec::Unix File::Spec for Unix, base for other File::Spec modules =item File::Spec::VMS Methods for VMS file specs =item File::Spec::Win32 Methods for Win32 file specs =item File::Temp Return name and handle of a temporary file safely =item File::stat By-name interface to Perl's built-in stat() functions =item FileCache Keep more files open than the system permits =item FileHandle Supply object methods for filehandles =item Filter::Simple Simplified source filtering =item Filter::Util::Call Perl Source Filter Utility Module =item FindBin Locate directory of original perl script =item GDBM_File Perl5 access to the gdbm library. =item Getopt::Long Extended processing of command line options =item Getopt::Std Process single-character switches with switch clustering =item HTTP::Tiny A small, simple, correct HTTP/1.1 client =item Hash::Util A selection of general-utility hash subroutines =item Hash::Util::FieldHash Support for Inside-Out Classes =item I18N::Collate Compare 8-bit scalar data according to the current locale =item I18N::LangTags Functions for dealing with RFC3066-style language tags =item I18N::LangTags::Detect Detect the user's language preferences =item I18N::LangTags::List Tags and names for human languages =item I18N::Langinfo Query locale information =item IO Load various IO modules =item IO::Compress::Base Base Class for IO::Compress modules =item IO::Compress::Bzip2 Write bzip2 files/buffers =item IO::Compress::Deflate Write RFC 1950 files/buffers =item IO::Compress::FAQ Frequently Asked Questions about IO::Compress =item IO::Compress::Gzip Write RFC 1952 files/buffers =item IO::Compress::RawDeflate Write RFC 1951 files/buffers =item IO::Compress::Zip Write zip files/buffers =item IO::Dir Supply object methods for directory handles =item IO::File Supply object methods for filehandles =item IO::Handle Supply object methods for I/O handles =item IO::Pipe Supply object methods for pipes =item IO::Poll Object interface to system poll call =item IO::Seekable Supply seek based methods for I/O objects =item IO::Select OO interface to the select system call =item IO::Socket Object interface to socket communications =item IO::Socket::INET Object interface for AF_INET domain sockets =item IO::Socket::UNIX Object interface for AF_UNIX domain sockets =item IO::Uncompress::AnyInflate Uncompress zlib-based (zip, gzip) file/buffer =item IO::Uncompress::AnyUncompress Uncompress gzip, zip, bzip2, xz, lzma, lzip, lzf or lzop file/buffer =item IO::Uncompress::Base Base Class for IO::Uncompress modules =item IO::Uncompress::Bunzip2 Read bzip2 files/buffers =item IO::Uncompress::Gunzip Read RFC 1952 files/buffers =item IO::Uncompress::Inflate Read RFC 1950 files/buffers =item IO::Uncompress::RawInflate Read RFC 1951 files/buffers =item IO::Uncompress::Unzip Read zip files/buffers =item IO::Zlib IO:: style interface to L<Compress::Zlib> =item IPC::Cmd Finding and running system commands made easy =item IPC::Msg SysV Msg IPC object class =item IPC::Open2 Open a process for both reading and writing using open2() =item IPC::Open3 Open a process for reading, writing, and error handling using open3() =item IPC::Semaphore SysV Semaphore IPC object class =item IPC::SharedMem SysV Shared Memory IPC object class =item IPC::SysV System V IPC constants and system calls =item Internals Reserved special namespace for internals related functions =item JSON::PP JSON::XS compatible pure-Perl module. =item JSON::PP::Boolean Dummy module providing JSON::PP::Boolean =item List::Util A selection of general-utility list subroutines =item List::Util::XS Indicate if List::Util was compiled with a C compiler =item Locale::Maketext Framework for localization =item Locale::Maketext::Cookbook Recipes for using Locale::Maketext =item Locale::Maketext::Guts Deprecated module to load Locale::Maketext utf8 code =item Locale::Maketext::GutsLoader Deprecated module to load Locale::Maketext utf8 code =item Locale::Maketext::Simple Simple interface to Locale::Maketext::Lexicon =item Locale::Maketext::TPJ13 Article about software localization =item MIME::Base64 Encoding and decoding of base64 strings =item MIME::QuotedPrint Encoding and decoding of quoted-printable strings =item Math::BigFloat Arbitrary size floating point math package =item Math::BigInt Arbitrary size integer/float math package =item Math::BigInt::Calc Pure Perl module to support Math::BigInt =item Math::BigInt::FastCalc Math::BigInt::Calc with some XS for more speed =item Math::BigInt::Lib Virtual parent class for Math::BigInt libraries =item Math::BigRat Arbitrary big rational numbers =item Math::Complex Complex numbers and associated mathematical functions =item Math::Trig Trigonometric functions =item Memoize Make functions faster by trading space for time =item Memoize::AnyDBM_File Glue to provide EXISTS for AnyDBM_File for Storable use =item Memoize::Expire Plug-in module for automatic expiration of memoized values =item Memoize::ExpireFile Test for Memoize expiration semantics =item Memoize::ExpireTest Test for Memoize expiration semantics =item Memoize::NDBM_File Glue to provide EXISTS for NDBM_File for Storable use =item Memoize::SDBM_File Glue to provide EXISTS for SDBM_File for Storable use =item Memoize::Storable Store Memoized data in Storable database =item Module::CoreList What modules shipped with versions of perl =item Module::CoreList::Utils What utilities shipped with versions of perl =item Module::Load Runtime require of both modules and files =item Module::Load::Conditional Looking up module information / loading at runtime =item Module::Loaded Mark modules as loaded or unloaded =item Module::Metadata Gather package and POD information from perl module files =item NDBM_File Tied access to ndbm files =item NEXT Provide a pseudo-class NEXT (et al) that allows method redispatch =item Net::Cmd Network Command class (as used by FTP, SMTP etc) =item Net::Config Local configuration data for libnet =item Net::Domain Attempt to evaluate the current host's internet name and domain =item Net::FTP FTP Client class =item Net::FTP::dataconn FTP Client data connection class =item Net::NNTP NNTP Client class =item Net::Netrc OO interface to users netrc file =item Net::POP3 Post Office Protocol 3 Client class (RFC1939) =item Net::Ping Check a remote host for reachability =item Net::SMTP Simple Mail Transfer Protocol Client =item Net::Time Time and daytime network client interface =item Net::hostent By-name interface to Perl's built-in gethost*() functions =item Net::libnetFAQ Libnet Frequently Asked Questions =item Net::netent By-name interface to Perl's built-in getnet*() functions =item Net::protoent By-name interface to Perl's built-in getproto*() functions =item Net::servent By-name interface to Perl's built-in getserv*() functions =item O Generic interface to Perl Compiler backends =item ODBM_File Tied access to odbm files =item Opcode Disable named opcodes when compiling perl code =item POSIX Perl interface to IEEE Std 1003.1 =item Params::Check A generic input parsing/checking mechanism. =item Parse::CPAN::Meta Parse META.yml and META.json CPAN metadata files =item Perl::OSType Map Perl operating system names to generic types =item PerlIO On demand loader for PerlIO layers and root of PerlIO::* name space =item PerlIO::encoding Encoding layer =item PerlIO::mmap Memory mapped IO =item PerlIO::scalar In-memory IO, scalar IO =item PerlIO::via Helper class for PerlIO layers implemented in perl =item PerlIO::via::QuotedPrint PerlIO layer for quoted-printable strings =item Pod::Checker Check pod documents for syntax errors =item Pod::Escapes For resolving Pod EE<lt>...E<gt> sequences =item Pod::Functions Group Perl's functions a la perlfunc.pod =item Pod::Html Module to convert pod files to HTML =item Pod::Man Convert POD data to formatted *roff input =item Pod::ParseLink Parse an LE<lt>E<gt> formatting code in POD text =item Pod::Perldoc Look up Perl documentation in Pod format. =item Pod::Perldoc::BaseTo Base for Pod::Perldoc formatters =item Pod::Perldoc::GetOptsOO Customized option parser for Pod::Perldoc =item Pod::Perldoc::ToANSI Render Pod with ANSI color escapes =item Pod::Perldoc::ToChecker Let Perldoc check Pod for errors =item Pod::Perldoc::ToMan Let Perldoc render Pod as man pages =item Pod::Perldoc::ToNroff Let Perldoc convert Pod to nroff =item Pod::Perldoc::ToPod Let Perldoc render Pod as ... Pod! =item Pod::Perldoc::ToRtf Let Perldoc render Pod as RTF =item Pod::Perldoc::ToTerm Render Pod with terminal escapes =item Pod::Perldoc::ToText Let Perldoc render Pod as plaintext =item Pod::Perldoc::ToTk Let Perldoc use Tk::Pod to render Pod =item Pod::Perldoc::ToXml Let Perldoc render Pod as XML =item Pod::Simple Framework for parsing Pod =item Pod::Simple::Checker Check the Pod syntax of a document =item Pod::Simple::Debug Put Pod::Simple into trace/debug mode =item Pod::Simple::DumpAsText Dump Pod-parsing events as text =item Pod::Simple::DumpAsXML Turn Pod into XML =item Pod::Simple::HTML Convert Pod to HTML =item Pod::Simple::HTMLBatch Convert several Pod files to several HTML files =item Pod::Simple::JustPod Just the Pod, the whole Pod, and nothing but the Pod =item Pod::Simple::LinkSection Represent "section" attributes of L codes =item Pod::Simple::Methody Turn Pod::Simple events into method calls =item Pod::Simple::PullParser A pull-parser interface to parsing Pod =item Pod::Simple::PullParserEndToken End-tokens from Pod::Simple::PullParser =item Pod::Simple::PullParserStartToken Start-tokens from Pod::Simple::PullParser =item Pod::Simple::PullParserTextToken Text-tokens from Pod::Simple::PullParser =item Pod::Simple::PullParserToken Tokens from Pod::Simple::PullParser =item Pod::Simple::RTF Format Pod as RTF =item Pod::Simple::Search Find POD documents in directory trees =item Pod::Simple::SimpleTree Parse Pod into a simple parse tree =item Pod::Simple::Subclassing Write a formatter as a Pod::Simple subclass =item Pod::Simple::Text Format Pod as plaintext =item Pod::Simple::TextContent Get the text content of Pod =item Pod::Simple::XHTML Format Pod as validating XHTML =item Pod::Simple::XMLOutStream Turn Pod into XML =item Pod::Text Convert POD data to formatted text =item Pod::Text::Color Convert POD data to formatted color ASCII text =item Pod::Text::Overstrike Convert POD data to formatted overstrike text =item Pod::Text::Termcap Convert POD data to ASCII text with format escapes =item Pod::Usage Print a usage message from embedded pod documentation =item SDBM_File Tied access to sdbm files =item Safe Compile and execute code in restricted compartments =item Scalar::Util A selection of general-utility scalar subroutines =item Search::Dict Look - search for key in dictionary file =item SelectSaver Save and restore selected file handle =item SelfLoader Load functions only on demand =item Storable Persistence for Perl data structures =item Sub::Util A selection of utility subroutines for subs and CODE references =item Symbol Manipulate Perl symbols and their names =item Sys::Hostname Try every conceivable way to get hostname =item Sys::Syslog Perl interface to the UNIX syslog(3) calls =item Sys::Syslog::Win32 Win32 support for Sys::Syslog =item TAP::Base Base class that provides common functionality to L<TAP::Parser> =item TAP::Formatter::Base Base class for harness output delegates =item TAP::Formatter::Color Run Perl test scripts with color =item TAP::Formatter::Console Harness output delegate for default console output =item TAP::Formatter::Console::ParallelSession Harness output delegate for parallel console output =item TAP::Formatter::Console::Session Harness output delegate for default console output =item TAP::Formatter::File Harness output delegate for file output =item TAP::Formatter::File::Session Harness output delegate for file output =item TAP::Formatter::Session Abstract base class for harness output delegate =item TAP::Harness Run test scripts with statistics =item TAP::Harness::Env Parsing harness related environmental variables where appropriate =item TAP::Object Base class that provides common functionality to all C<TAP::*> modules =item TAP::Parser Parse L<TAP|Test::Harness::TAP> output =item TAP::Parser::Aggregator Aggregate TAP::Parser results =item TAP::Parser::Grammar A grammar for the Test Anything Protocol. =item TAP::Parser::Iterator Base class for TAP source iterators =item TAP::Parser::Iterator::Array Iterator for array-based TAP sources =item TAP::Parser::Iterator::Process Iterator for process-based TAP sources =item TAP::Parser::Iterator::Stream Iterator for filehandle-based TAP sources =item TAP::Parser::IteratorFactory Figures out which SourceHandler objects to use for a given Source =item TAP::Parser::Multiplexer Multiplex multiple TAP::Parsers =item TAP::Parser::Result Base class for TAP::Parser output objects =item TAP::Parser::Result::Bailout Bailout result token. =item TAP::Parser::Result::Comment Comment result token. =item TAP::Parser::Result::Plan Plan result token. =item TAP::Parser::Result::Pragma TAP pragma token. =item TAP::Parser::Result::Test Test result token. =item TAP::Parser::Result::Unknown Unknown result token. =item TAP::Parser::Result::Version TAP syntax version token. =item TAP::Parser::Result::YAML YAML result token. =item TAP::Parser::ResultFactory Factory for creating TAP::Parser output objects =item TAP::Parser::Scheduler Schedule tests during parallel testing =item TAP::Parser::Scheduler::Job A single testing job. =item TAP::Parser::Scheduler::Spinner A no-op job. =item TAP::Parser::Source A TAP source & meta data about it =item TAP::Parser::SourceHandler Base class for different TAP source handlers =item TAP::Parser::SourceHandler::Executable Stream output from an executable TAP source =item TAP::Parser::SourceHandler::File Stream TAP from a text file. =item TAP::Parser::SourceHandler::Handle Stream TAP from an IO::Handle or a GLOB. =item TAP::Parser::SourceHandler::Perl Stream TAP from a Perl executable =item TAP::Parser::SourceHandler::RawTAP Stream output from raw TAP in a scalar/array ref. =item TAP::Parser::YAMLish::Reader Read YAMLish data from iterator =item TAP::Parser::YAMLish::Writer Write YAMLish data =item Term::ANSIColor Color screen output using ANSI escape sequences =item Term::Cap Perl termcap interface =item Term::Complete Perl word completion module =item Term::ReadLine Perl interface to various C<readline> packages. =item Test Provides a simple framework for writing test scripts =item Test2 Framework for writing test tools that all work together. =item Test2::API Primary interface for writing Test2 based testing tools. =item Test2::API::Breakage What breaks at what version =item Test2::API::Context Object to represent a testing context. =item Test2::API::Instance Object used by Test2::API under the hood =item Test2::API::Stack Object to manage a stack of L<Test2::Hub> =item Test2::Event Base class for events =item Test2::Event::Bail Bailout! =item Test2::Event::Diag Diag event type =item Test2::Event::Encoding Set the encoding for the output stream =item Test2::Event::Exception Exception event =item Test2::Event::Fail Event for a simple failed assertion =item Test2::Event::Generic Generic event type. =item Test2::Event::Note Note event type =item Test2::Event::Ok Ok event type =item Test2::Event::Pass Event for a simple passing assertion =item Test2::Event::Plan The event of a plan =item Test2::Event::Skip Skip event type =item Test2::Event::Subtest Event for subtest types =item Test2::Event::TAP::Version Event for TAP version. =item Test2::Event::V2 Second generation event. =item Test2::Event::Waiting Tell all procs/threads it is time to be done =item Test2::EventFacet Base class for all event facets. =item Test2::EventFacet::About Facet with event details. =item Test2::EventFacet::Amnesty Facet for assertion amnesty. =item Test2::EventFacet::Assert Facet representing an assertion. =item Test2::EventFacet::Control Facet for hub actions and behaviors. =item Test2::EventFacet::Error Facet for errors that need to be shown. =item Test2::EventFacet::Hub Facet for the hubs an event passes through. =item Test2::EventFacet::Info Facet for information a developer might care about. =item Test2::EventFacet::Info::Table Intermediary representation of a table. =item Test2::EventFacet::Meta Facet for meta-data =item Test2::EventFacet::Parent Facet for events contains other events =item Test2::EventFacet::Plan Facet for setting the plan =item Test2::EventFacet::Render Facet that dictates how to render an event. =item Test2::EventFacet::Trace Debug information for events =item Test2::Formatter Namespace for formatters. =item Test2::Formatter::TAP Standard TAP formatter =item Test2::Hub The conduit through which all events flow. =item Test2::Hub::Interceptor Hub used by interceptor to grab results. =item Test2::Hub::Interceptor::Terminator Exception class used by =item Test2::Hub::Subtest Hub used by subtests =item Test2::IPC Turn on IPC for threading or forking support. =item Test2::IPC::Driver Base class for Test2 IPC drivers. =item Test2::IPC::Driver::Files Temp dir + Files concurrency model. =item Test2::Tools::Tiny Tiny set of tools for unfortunate souls who cannot use =item Test2::Transition Transition notes when upgrading to Test2 =item Test2::Util Tools used by Test2 and friends. =item Test2::Util::ExternalMeta Allow third party tools to safely attach meta-data =item Test2::Util::Facets2Legacy Convert facet data to the legacy event API. =item Test2::Util::HashBase Build hash based classes. =item Test2::Util::Trace Legacy wrapper fro L<Test2::EventFacet::Trace>. =item Test::Builder Backend for building test libraries =item Test::Builder::Formatter Test::Builder subclass of Test2::Formatter::TAP =item Test::Builder::IO::Scalar A copy of IO::Scalar for Test::Builder =item Test::Builder::Module Base class for test modules =item Test::Builder::Tester Test testsuites that have been built with =item Test::Builder::Tester::Color Turn on colour in Test::Builder::Tester =item Test::Builder::TodoDiag Test::Builder subclass of Test2::Event::Diag =item Test::Harness Run Perl standard test scripts with statistics =item Test::Harness::Beyond Beyond make test =item Test::More Yet another framework for writing test scripts =item Test::Simple Basic utilities for writing tests. =item Test::Tester Ease testing test modules built with Test::Builder =item Test::Tester::Capture Help testing test modules built with Test::Builder =item Test::Tester::CaptureRunner Help testing test modules built with Test::Builder =item Test::Tutorial A tutorial about writing really basic tests =item Test::use::ok Alternative to Test::More::use_ok =item Text::Abbrev Abbrev - create an abbreviation table from a list =item Text::Balanced Extract delimited text sequences from strings. =item Text::ParseWords Parse text into an array of tokens or array of arrays =item Text::Tabs Expand and unexpand tabs like unix expand(1) and unexpand(1) =item Text::Wrap Line wrapping to form simple paragraphs =item Thread Manipulate threads in Perl (for old code only) =item Thread::Queue Thread-safe queues =item Thread::Semaphore Thread-safe semaphores =item Tie::Array Base class for tied arrays =item Tie::File Access the lines of a disk file via a Perl array =item Tie::Handle Base class definitions for tied handles =item Tie::Hash Base class definitions for tied hashes =item Tie::Hash::NamedCapture Named regexp capture buffers =item Tie::Memoize Add data to hash when needed =item Tie::RefHash Use references as hash keys =item Tie::Scalar Base class definitions for tied scalars =item Tie::StdHandle Base class definitions for tied handles =item Tie::SubstrHash Fixed-table-size, fixed-key-length hashing =item Time::HiRes High resolution alarm, sleep, gettimeofday, interval timers =item Time::Local Efficiently compute time from local and GMT time =item Time::Piece Object Oriented time objects =item Time::Seconds A simple API to convert seconds to other date values =item Time::gmtime By-name interface to Perl's built-in gmtime() function =item Time::localtime By-name interface to Perl's built-in localtime() function =item Time::tm Internal object used by Time::gmtime and Time::localtime =item UNIVERSAL Base class for ALL classes (blessed references) =item Unicode::Collate Unicode Collation Algorithm =item Unicode::Collate::CJK::Big5 Weighting CJK Unified Ideographs =item Unicode::Collate::CJK::GB2312 Weighting CJK Unified Ideographs =item Unicode::Collate::CJK::JISX0208 Weighting JIS KANJI for Unicode::Collate =item Unicode::Collate::CJK::Korean Weighting CJK Unified Ideographs =item Unicode::Collate::CJK::Pinyin Weighting CJK Unified Ideographs =item Unicode::Collate::CJK::Stroke Weighting CJK Unified Ideographs =item Unicode::Collate::CJK::Zhuyin Weighting CJK Unified Ideographs =item Unicode::Collate::Locale Linguistic tailoring for DUCET via Unicode::Collate =item Unicode::Normalize Unicode Normalization Forms =item Unicode::UCD Unicode character database =item User::grent By-name interface to Perl's built-in getgr*() functions =item User::pwent By-name interface to Perl's built-in getpw*() functions =item VMS::DCLsym Perl extension to manipulate DCL symbols =item VMS::Filespec Convert between VMS and Unix file specification syntax =item VMS::Stdio Standard I/O functions via VMS extensions =item Win32 Interfaces to some Win32 API Functions =item Win32API::File Low-level access to Win32 system API calls for files/dirs. =item Win32CORE Win32 CORE function stubs =item XS::APItest Test the perl C API =item XS::Typemap Module to test the XS typemaps distributed with perl =item XSLoader Dynamically load C libraries into Perl code =item autodie::Scope::Guard Wrapper class for calling subs at end of scope =item autodie::Scope::GuardStack Hook stack for managing scopes via %^H =item autodie::Util Internal Utility subroutines for autodie and Fatal =item version::Internals Perl extension for Version Objects =back To find out I<all> modules installed on your system, including those without documentation or outside the standard release, just use the following command (under the default win32 shell, double quotes should be used instead of single quotes). % perl -MFile::Find=find -MFile::Spec::Functions -Tlwe \ 'find { wanted => sub { print canonpath $_ if /\.pm\z/ }, no_chdir => 1 }, @INC' (The -T is here to prevent '.' from being listed in @INC.) They should all have their own documentation installed and accessible via your system man(1) command. If you do not have a B<find> program, you can use the Perl B<find2perl> program instead, which generates Perl code as output you can run through perl. If you have a B<man> program but it doesn't find your modules, you'll have to fix your manpath. See L<perl> for details. If you have no system B<man> command, you might try the B<perldoc> program. Note also that the command C<perldoc perllocal> gives you a (possibly incomplete) list of the modules that have been further installed on your system. (The perllocal.pod file is updated by the standard MakeMaker install process.) =head2 Extension Modules Extension modules are written in C (or a mix of Perl and C). They are usually dynamically loaded into Perl if and when you need them, but may also be linked in statically. Supported extension modules include Socket, Fcntl, and POSIX. Many popular C extension modules do not come bundled (at least, not completely) due to their sizes, volatility, or simply lack of time for adequate testing and configuration across the multitude of platforms on which Perl was beta-tested. You are encouraged to look for them on CPAN (described below), or using web search engines like Google or DuckDuckGo. =head1 CPAN CPAN stands for Comprehensive Perl Archive Network; it's a globally replicated trove of Perl materials, including documentation, style guides, tricks and traps, alternate ports to non-Unix systems and occasional binary distributions for these. Search engines for CPAN can be found at https://www.cpan.org/ Most importantly, CPAN includes around a thousand unbundled modules, some of which require a C compiler to build. Major categories of modules are: =over =item * Language Extensions and Documentation Tools =item * Development Support =item * Operating System Interfaces =item * Networking, Device Control (modems) and InterProcess Communication =item * Data Types and Data Type Utilities =item * Database Interfaces =item * User Interfaces =item * Interfaces to / Emulations of Other Programming Languages =item * File Names, File Systems and File Locking (see also File Handles) =item * String Processing, Language Text Processing, Parsing, and Searching =item * Option, Argument, Parameter, and Configuration File Processing =item * Internationalization and Locale =item * Authentication, Security, and Encryption =item * World Wide Web, HTML, HTTP, CGI, MIME =item * Server and Daemon Utilities =item * Archiving and Compression =item * Images, Pixmap and Bitmap Manipulation, Drawing, and Graphing =item * Mail and Usenet News =item * Control Flow Utilities (callbacks and exceptions etc) =item * File Handle and Input/Output Stream Utilities =item * Miscellaneous Modules =back The list of the registered CPAN sites follows. Please note that the sorting order is alphabetical on fields: Continent | |-->Country | |-->[state/province] | |-->ftp | |-->[http] and thus the North American servers happen to be listed between the European and the South American sites. Registered CPAN sites =for maintainers Generated by Porting/make_modlib_cpan.pl =head2 Africa =over 4 =item South Africa http://mirror.is.co.za/pub/cpan/ ftp://ftp.is.co.za/pub/cpan/ http://cpan.mirror.ac.za/ ftp://cpan.mirror.ac.za/ http://cpan.saix.net/ ftp://ftp.saix.net/pub/CPAN/ http://ftp.wa.co.za/pub/CPAN/ ftp://ftp.wa.co.za/pub/CPAN/ =item Uganda http://mirror.ucu.ac.ug/cpan/ =item Zimbabwe http://mirror.zol.co.zw/CPAN/ ftp://mirror.zol.co.zw/CPAN/ =back =head2 Asia =over 4 =item Bangladesh http://mirror.dhakacom.com/CPAN/ ftp://mirror.dhakacom.com/CPAN/ =item China http://cpan.communilink.net/ http://ftp.cuhk.edu.hk/pub/packages/perl/CPAN/ ftp://ftp.cuhk.edu.hk/pub/packages/perl/CPAN/ http://mirrors.hust.edu.cn/CPAN/ http://mirrors.neusoft.edu.cn/cpan/ http://mirror.lzu.edu.cn/CPAN/ http://mirrors.163.com/cpan/ http://mirrors.sohu.com/CPAN/ http://mirrors.ustc.edu.cn/CPAN/ ftp://mirrors.ustc.edu.cn/CPAN/ http://mirrors.xmu.edu.cn/CPAN/ ftp://mirrors.xmu.edu.cn/CPAN/ http://mirrors.zju.edu.cn/CPAN/ =item India http://cpan.excellmedia.net/ http://perlmirror.indialinks.com/ =item Indonesia http://kambing.ui.ac.id/cpan/ http://cpan.pesat.net.id/ http://mirror.poliwangi.ac.id/CPAN/ http://kartolo.sby.datautama.net.id/CPAN/ http://mirror.wanxp.id/cpan/ =item Iran http://mirror.yazd.ac.ir/cpan/ =item Israel http://biocourse.weizmann.ac.il/CPAN/ =item Japan http://ftp.jaist.ac.jp/pub/CPAN/ ftp://ftp.jaist.ac.jp/pub/CPAN/ http://mirror.jre655.com/CPAN/ ftp://mirror.jre655.com/CPAN/ ftp://ftp.kddilabs.jp/CPAN/ http://ftp.nara.wide.ad.jp/pub/CPAN/ ftp://ftp.nara.wide.ad.jp/pub/CPAN/ http://ftp.riken.jp/lang/CPAN/ ftp://ftp.riken.jp/lang/CPAN/ ftp://ftp.u-aizu.ac.jp/pub/CPAN/ http://ftp.yz.yamagata-u.ac.jp/pub/lang/cpan/ ftp://ftp.yz.yamagata-u.ac.jp/pub/lang/cpan/ =item Kazakhstan http://mirror.neolabs.kz/CPAN/ ftp://mirror.neolabs.kz/CPAN/ =item Philippines http://mirror.pregi.net/CPAN/ ftp://mirror.pregi.net/CPAN/ http://mirror.rise.ph/cpan/ ftp://mirror.rise.ph/cpan/ =item Qatar http://mirror.qnren.qa/CPAN/ ftp://mirror.qnren.qa/CPAN/ =item Republic of Korea http://cpan.mirror.cdnetworks.com/ ftp://cpan.mirror.cdnetworks.com/CPAN/ http://ftp.kaist.ac.kr/pub/CPAN/ ftp://ftp.kaist.ac.kr/CPAN/ http://ftp.kr.freebsd.org/pub/CPAN/ ftp://ftp.kr.freebsd.org/pub/CPAN/ http://mirror.navercorp.com/CPAN/ http://ftp.neowiz.com/CPAN/ ftp://ftp.neowiz.com/CPAN/ =item Singapore http://cpan.mirror.choon.net/ http://mirror.0x.sg/CPAN/ ftp://mirror.0x.sg/CPAN/ =item Taiwan http://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/ ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/ http://cpan.stu.edu.tw/ ftp://ftp.stu.edu.tw/CPAN/ http://ftp.yzu.edu.tw/CPAN/ ftp://ftp.yzu.edu.tw/CPAN/ http://cpan.nctu.edu.tw/ ftp://cpan.nctu.edu.tw/ http://ftp.ubuntu-tw.org/mirror/CPAN/ ftp://ftp.ubuntu-tw.org/mirror/CPAN/ =item Turkey http://cpan.ulak.net.tr/ ftp://ftp.ulak.net.tr/pub/perl/CPAN/ http://mirror.vit.com.tr/mirror/CPAN/ ftp://mirror.vit.com.tr/CPAN/ =item Viet Nam http://mirrors.digipower.vn/CPAN/ http://mirror.downloadvn.com/cpan/ http://mirrors.vinahost.vn/CPAN/ =back =head2 Europe =over 4 =item Austria http://cpan.inode.at/ ftp://cpan.inode.at/ http://mirror.easyname.at/cpan/ ftp://mirror.easyname.at/cpan/ http://gd.tuwien.ac.at/languages/perl/CPAN/ ftp://gd.tuwien.ac.at/pub/CPAN/ =item Belarus http://ftp.byfly.by/pub/CPAN/ ftp://ftp.byfly.by/pub/CPAN/ http://mirror.datacenter.by/pub/CPAN/ ftp://mirror.datacenter.by/pub/CPAN/ =item Belgium http://ftp.belnet.be/ftp.cpan.org/ ftp://ftp.belnet.be/mirror/ftp.cpan.org/ http://cpan.cu.be/ http://lib.ugent.be/CPAN/ http://cpan.weepeetelecom.be/ =item Bosnia and Herzegovina http://cpan.mirror.ba/ ftp://ftp.mirror.ba/CPAN/ =item Bulgaria http://mirrors.neterra.net/CPAN/ ftp://mirrors.neterra.net/CPAN/ http://mirrors.netix.net/CPAN/ ftp://mirrors.netix.net/CPAN/ =item Croatia http://ftp.carnet.hr/pub/CPAN/ ftp://ftp.carnet.hr/pub/CPAN/ =item Czech Republic http://mirror.dkm.cz/cpan/ ftp://mirror.dkm.cz/cpan/ ftp://ftp.fi.muni.cz/pub/CPAN/ http://mirrors.nic.cz/CPAN/ ftp://mirrors.nic.cz/pub/CPAN/ http://cpan.mirror.vutbr.cz/ ftp://mirror.vutbr.cz/cpan/ =item Denmark http://www.cpan.dk/ http://mirrors.dotsrc.org/cpan/ ftp://mirrors.dotsrc.org/cpan/ =item Finland ftp://ftp.funet.fi/pub/languages/perl/CPAN/ =item France http://ftp.ciril.fr/pub/cpan/ ftp://ftp.ciril.fr/pub/cpan/ http://distrib-coffee.ipsl.jussieu.fr/pub/mirrors/cpan/ ftp://distrib-coffee.ipsl.jussieu.fr/pub/mirrors/cpan/ http://ftp.lip6.fr/pub/perl/CPAN/ ftp://ftp.lip6.fr/pub/perl/CPAN/ http://mirror.ibcp.fr/pub/CPAN/ ftp://ftp.oleane.net/pub/CPAN/ http://cpan.mirrors.ovh.net/ftp.cpan.org/ ftp://cpan.mirrors.ovh.net/ftp.cpan.org/ http://cpan.enstimac.fr/ =item Germany http://mirror.23media.de/cpan/ ftp://mirror.23media.de/cpan/ http://artfiles.org/cpan.org/ ftp://artfiles.org/cpan.org/ http://mirror.bibleonline.ru/cpan/ http://mirror.checkdomain.de/CPAN/ ftp://mirror.checkdomain.de/CPAN/ http://cpan.noris.de/ http://mirror.de.leaseweb.net/CPAN/ ftp://mirror.de.leaseweb.net/CPAN/ http://cpan.mirror.euserv.net/ ftp://mirror.euserv.net/cpan/ http://ftp-stud.hs-esslingen.de/pub/Mirrors/CPAN/ ftp://mirror.fraunhofer.de/CPAN/ ftp://ftp.freenet.de/pub/ftp.cpan.org/pub/CPAN/ http://ftp.hosteurope.de/pub/CPAN/ ftp://ftp.hosteurope.de/pub/CPAN/ ftp://ftp.fu-berlin.de/unix/languages/perl/ http://ftp.gwdg.de/pub/languages/perl/CPAN/ ftp://ftp.gwdg.de/pub/languages/perl/CPAN/ http://ftp.hawo.stw.uni-erlangen.de/CPAN/ ftp://ftp.hawo.stw.uni-erlangen.de/CPAN/ http://cpan.mirror.iphh.net/ ftp://cpan.mirror.iphh.net/pub/CPAN/ ftp://ftp.mpi-inf.mpg.de/pub/perl/CPAN/ http://cpan.netbet.org/ http://mirror.netcologne.de/cpan/ ftp://mirror.netcologne.de/cpan/ ftp://mirror.petamem.com/CPAN/ http://www.planet-elektronik.de/CPAN/ http://ftp.halifax.rwth-aachen.de/cpan/ ftp://ftp.halifax.rwth-aachen.de/cpan/ http://mirror.softaculous.com/cpan/ http://ftp.u-tx.net/CPAN/ ftp://ftp.u-tx.net/CPAN/ http://mirror.reismil.ch/CPAN/ =item Greece http://cpan.cc.uoc.gr/mirrors/CPAN/ ftp://ftp.cc.uoc.gr/mirrors/CPAN/ http://ftp.ntua.gr/pub/lang/perl/ ftp://ftp.ntua.gr/pub/lang/perl/ =item Hungary http://mirror.met.hu/CPAN/ =item Ireland http://ftp.heanet.ie/mirrors/ftp.perl.org/pub/CPAN/ ftp://ftp.heanet.ie/mirrors/ftp.perl.org/pub/CPAN/ =item Italy http://bo.mirror.garr.it/mirrors/CPAN/ ftp://ftp.eutelia.it/CPAN_Mirror/ http://cpan.panu.it/ ftp://ftp.panu.it/pub/mirrors/perl/CPAN/ http://cpan.muzzy.it/ =item Latvia http://kvin.lv/pub/CPAN/ =item Lithuania http://ftp.litnet.lt/pub/CPAN/ ftp://ftp.litnet.lt/pub/CPAN/ =item Moldova http://mirror.as43289.net/pub/CPAN/ ftp://mirror.as43289.net/pub/CPAN/ =item Netherlands http://cpan.cs.uu.nl/ ftp://ftp.cs.uu.nl/pub/CPAN/ http://mirror.nl.leaseweb.net/CPAN/ ftp://mirror.nl.leaseweb.net/CPAN/ http://ftp.nluug.nl/languages/perl/CPAN/ ftp://ftp.nluug.nl/pub/languages/perl/CPAN/ http://mirror.transip.net/CPAN/ ftp://mirror.transip.net/CPAN/ http://cpan.mirror.triple-it.nl/ http://ftp.tudelft.nl/cpan/ ftp://ftp.tudelft.nl/pub/CPAN/ ftp://download.xs4all.nl/pub/mirror/CPAN/ =item Norway http://cpan.uib.no/ ftp://cpan.uib.no/pub/CPAN/ ftp://ftp.uninett.no/pub/languages/perl/CPAN/ http://cpan.vianett.no/ =item Poland http://ftp.agh.edu.pl/CPAN/ ftp://ftp.agh.edu.pl/CPAN/ http://ftp.piotrkosoft.net/pub/mirrors/CPAN/ ftp://ftp.piotrkosoft.net/pub/mirrors/CPAN/ ftp://ftp.ps.pl/pub/CPAN/ http://sunsite.icm.edu.pl/pub/CPAN/ ftp://sunsite.icm.edu.pl/pub/CPAN/ =item Portugal http://cpan.dcc.fc.up.pt/ http://mirrors.fe.up.pt/pub/CPAN/ http://cpan.perl-hackers.net/ http://cpan.perl.pt/ =item Romania http://mirrors.hostingromania.ro/cpan.org/ ftp://ftp.lug.ro/CPAN/ http://mirrors.m247.ro/CPAN/ http://mirrors.evowise.com/CPAN/ http://mirrors.teentelecom.net/CPAN/ ftp://mirrors.teentelecom.net/CPAN/ http://mirrors.xservers.ro/CPAN/ =item Russian Federation ftp://ftp.aha.ru/CPAN/ http://cpan.rinet.ru/ ftp://cpan.rinet.ru/pub/mirror/CPAN/ http://cpan-mirror.rbc.ru/pub/CPAN/ http://mirror.rol.ru/CPAN/ http://cpan.uni-altai.ru/ http://cpan.webdesk.ru/ ftp://cpan.webdesk.ru/cpan/ http://mirror.yandex.ru/mirrors/cpan/ ftp://mirror.yandex.ru/mirrors/cpan/ =item Serbia http://mirror.sbb.rs/CPAN/ ftp://mirror.sbb.rs/CPAN/ =item Slovakia http://cpan.lnx.sk/ http://tux.rainside.sk/CPAN/ ftp://tux.rainside.sk/CPAN/ =item Slovenia http://ftp.arnes.si/software/perl/CPAN/ ftp://ftp.arnes.si/software/perl/CPAN/ =item Spain http://mirrors.evowise.com/CPAN/ http://osl.ugr.es/CPAN/ http://ftp.rediris.es/mirror/CPAN/ ftp://ftp.rediris.es/mirror/CPAN/ =item Sweden http://ftp.acc.umu.se/mirror/CPAN/ ftp://ftp.acc.umu.se/mirror/CPAN/ =item Switzerland http://www.pirbot.com/mirrors/cpan/ http://mirror.switch.ch/ftp/mirror/CPAN/ ftp://mirror.switch.ch/mirror/CPAN/ =item Ukraine http://cpan.ip-connect.vn.ua/ ftp://cpan.ip-connect.vn.ua/mirror/cpan/ =item United Kingdom http://cpan.mirror.anlx.net/ ftp://ftp.mirror.anlx.net/CPAN/ http://mirror.bytemark.co.uk/CPAN/ ftp://mirror.bytemark.co.uk/CPAN/ http://mirrors.coreix.net/CPAN/ http://cpan.etla.org/ ftp://cpan.etla.org/pub/CPAN/ http://cpan.cpantesters.org/ http://mirror.sax.uk.as61049.net/CPAN/ http://mirror.sov.uk.goscomb.net/CPAN/ http://www.mirrorservice.org/sites/cpan.perl.org/CPAN/ ftp://ftp.mirrorservice.org/sites/cpan.perl.org/CPAN/ http://mirror.ox.ac.uk/sites/www.cpan.org/ ftp://mirror.ox.ac.uk/sites/www.cpan.org/ http://ftp.ticklers.org/pub/CPAN/ ftp://ftp.ticklers.org/pub/CPAN/ http://cpan.mirrors.uk2.net/ ftp://mirrors.uk2.net/pub/CPAN/ http://mirror.ukhost4u.com/CPAN/ =back =head2 North America =over 4 =item Canada http://CPAN.mirror.rafal.ca/ ftp://CPAN.mirror.rafal.ca/pub/CPAN/ http://mirror.csclub.uwaterloo.ca/CPAN/ ftp://mirror.csclub.uwaterloo.ca/CPAN/ http://mirrors.gossamer-threads.com/CPAN/ http://mirror.its.dal.ca/cpan/ ftp://mirror.its.dal.ca/cpan/ ftp://ftp.ottix.net/pub/CPAN/ =item Costa Rica http://mirrors.ucr.ac.cr/CPAN/ =item Mexico http://www.msg.com.mx/CPAN/ ftp://ftp.msg.com.mx/pub/CPAN/ =item United States =over 8 =item Alabama http://mirror.teklinks.com/CPAN/ =item Arizona http://mirror.n5tech.com/CPAN/ http://mirrors.namecheap.com/CPAN/ ftp://mirrors.namecheap.com/CPAN/ =item California http://cpan.develooper.com/ http://httpupdate127.cpanel.net/CPAN/ http://mirrors.sonic.net/cpan/ ftp://mirrors.sonic.net/cpan/ http://www.perl.com/CPAN/ http://cpan.yimg.com/ =item Idaho http://mirrors.syringanetworks.net/CPAN/ ftp://mirrors.syringanetworks.net/CPAN/ =item Illinois http://cpan.mirrors.hoobly.com/ http://mirror.team-cymru.org/CPAN/ ftp://mirror.team-cymru.org/CPAN/ =item Indiana http://cpan.netnitco.net/ ftp://cpan.netnitco.net/pub/mirrors/CPAN/ ftp://ftp.uwsg.iu.edu/pub/perl/CPAN/ =item Kansas http://mirrors.concertpass.com/cpan/ =item Massachusetts http://mirrors.ccs.neu.edu/CPAN/ =item Michigan http://cpan.cse.msu.edu/ ftp://cpan.cse.msu.edu/ http://httpupdate118.cpanel.net/CPAN/ http://mirrors-usa.go-parts.com/cpan/ http://ftp.wayne.edu/CPAN/ ftp://ftp.wayne.edu/CPAN/ =item New Hampshire http://mirror.metrocast.net/cpan/ =item New Jersey http://mirror.datapipe.net/CPAN/ ftp://mirror.datapipe.net/pub/CPAN/ http://www.hoovism.com/CPAN/ ftp://ftp.hoovism.com/CPAN/ http://cpan.mirror.nac.net/ =item New York http://mirror.cc.columbia.edu/pub/software/cpan/ ftp://mirror.cc.columbia.edu/pub/software/cpan/ http://cpan.belfry.net/ http://cpan.erlbaum.net/ ftp://cpan.erlbaum.net/CPAN/ http://cpan.hexten.net/ ftp://cpan.hexten.net/ http://mirror.nyi.net/CPAN/ ftp://mirror.nyi.net/pub/CPAN/ http://noodle.portalus.net/CPAN/ ftp://noodle.portalus.net/CPAN/ http://mirrors.rit.edu/CPAN/ ftp://mirrors.rit.edu/CPAN/ =item North Carolina http://httpupdate140.cpanel.net/CPAN/ http://mirrors.ibiblio.org/CPAN/ =item Oregon http://ftp.osuosl.org/pub/CPAN/ ftp://ftp.osuosl.org/pub/CPAN/ http://mirror.uoregon.edu/CPAN/ =item Pennsylvania http://cpan.pair.com/ ftp://cpan.pair.com/pub/CPAN/ http://cpan.mirrors.ionfish.org/ =item South Carolina http://cpan.mirror.clemson.edu/ =item Texas http://mirror.uta.edu/CPAN/ =item Utah http://cpan.cs.utah.edu/ ftp://cpan.cs.utah.edu/CPAN/ ftp://mirror.xmission.com/CPAN/ =item Virginia http://mirror.cogentco.com/pub/CPAN/ ftp://mirror.cogentco.com/pub/CPAN/ http://mirror.jmu.edu/pub/CPAN/ ftp://mirror.jmu.edu/pub/CPAN/ http://mirror.us.leaseweb.net/CPAN/ ftp://mirror.us.leaseweb.net/CPAN/ =item Washington http://cpan.llarian.net/ ftp://cpan.llarian.net/pub/CPAN/ =item Wisconsin http://cpan.mirrors.tds.net/ ftp://cpan.mirrors.tds.net/pub/CPAN/ =back =back =head2 Oceania =over 4 =item Australia http://mirror.as24220.net/pub/cpan/ ftp://mirror.as24220.net/pub/cpan/ http://cpan.mirrors.ilisys.com.au/ http://cpan.mirror.digitalpacific.com.au/ ftp://mirror.internode.on.net/pub/cpan/ http://mirror.optusnet.com.au/CPAN/ http://cpan.mirror.serversaustralia.com.au/ http://cpan.uberglobalmirror.com/ http://mirror.waia.asn.au/pub/cpan/ =item New Caledonia http://cpan.lagoon.nc/pub/CPAN/ ftp://cpan.lagoon.nc/pub/CPAN/ http://cpan.nautile.nc/CPAN/ ftp://cpan.nautile.nc/CPAN/ =item New Zealand ftp://ftp.auckland.ac.nz/pub/perl/CPAN/ http://cpan.catalyst.net.nz/CPAN/ ftp://cpan.catalyst.net.nz/pub/CPAN/ http://cpan.inspire.net.nz/ ftp://cpan.inspire.net.nz/cpan/ http://mirror.webtastix.net/CPAN/ ftp://mirror.webtastix.net/CPAN/ =back =head2 South America =over 4 =item Argentina http://cpan.mmgdesigns.com.ar/ =item Brazil http://cpan.kinghost.net/ http://linorg.usp.br/CPAN/ http://mirror.nbtelecom.com.br/CPAN/ =item Chile http://cpan.dcc.uchile.cl/ ftp://cpan.dcc.uchile.cl/pub/lang/cpan/ =back =head2 RSYNC Mirrors rsync://ftp.is.co.za/IS-Mirror/ftp.cpan.org/ rsync://mirror.ac.za/CPAN/ rsync://mirror.zol.co.zw/CPAN/ rsync://mirror.dhakacom.com/CPAN/ rsync://mirrors.ustc.edu.cn/CPAN/ rsync://mirrors.xmu.edu.cn/CPAN/ rsync://kambing.ui.ac.id/CPAN/ rsync://ftp.jaist.ac.jp/pub/CPAN/ rsync://mirror.jre655.com/CPAN/ rsync://ftp.kddilabs.jp/cpan/ rsync://ftp.nara.wide.ad.jp/cpan/ rsync://ftp.riken.jp/cpan/ rsync://mirror.neolabs.kz/CPAN/ rsync://mirror.qnren.qa/CPAN/ rsync://ftp.neowiz.com/CPAN/ rsync://mirror.0x.sg/CPAN/ rsync://ftp.yzu.edu.tw/pub/CPAN/ rsync://ftp.ubuntu-tw.org/CPAN/ rsync://mirrors.digipower.vn/CPAN/ rsync://cpan.inode.at/CPAN/ rsync://ftp.byfly.by/CPAN/ rsync://mirror.datacenter.by/CPAN/ rsync://ftp.belnet.be/cpan/ rsync://cpan.mirror.ba/CPAN/ rsync://mirrors.neterra.net/CPAN/ rsync://mirrors.netix.net/CPAN/ rsync://mirror.dkm.cz/cpan/ rsync://mirrors.nic.cz/CPAN/ rsync://cpan.mirror.vutbr.cz/cpan/ rsync://rsync.nic.funet.fi/CPAN/ rsync://ftp.ciril.fr/pub/cpan/ rsync://distrib-coffee.ipsl.jussieu.fr/pub/mirrors/cpan/ rsync://cpan.mirrors.ovh.net/CPAN/ rsync://mirror.de.leaseweb.net/CPAN/ rsync://mirror.euserv.net/cpan/ rsync://ftp-stud.hs-esslingen.de/CPAN/ rsync://ftp.gwdg.de/pub/languages/perl/CPAN/ rsync://ftp.hawo.stw.uni-erlangen.de/CPAN/ rsync://cpan.mirror.iphh.net/CPAN/ rsync://mirror.netcologne.de/cpan/ rsync://ftp.halifax.rwth-aachen.de/cpan/ rsync://ftp.ntua.gr/CPAN/ rsync://mirror.met.hu/CPAN/ rsync://ftp.heanet.ie/mirrors/ftp.perl.org/pub/CPAN/ rsync://rsync.panu.it/CPAN/ rsync://mirror.as43289.net/CPAN/ rsync://rsync.cs.uu.nl/CPAN/ rsync://mirror.nl.leaseweb.net/CPAN/ rsync://ftp.nluug.nl/CPAN/ rsync://mirror.transip.net/CPAN/ rsync://cpan.uib.no/cpan/ rsync://cpan.vianett.no/CPAN/ rsync://cpan.perl-hackers.net/CPAN/ rsync://cpan.perl.pt/cpan/ rsync://mirrors.m247.ro/CPAN/ rsync://mirrors.teentelecom.net/CPAN/ rsync://cpan.webdesk.ru/CPAN/ rsync://mirror.yandex.ru/mirrors/cpan/ rsync://mirror.sbb.rs/CPAN/ rsync://ftp.acc.umu.se/mirror/CPAN/ rsync://rsync.pirbot.com/ftp/cpan/ rsync://cpan.ip-connect.vn.ua/CPAN/ rsync://rsync.mirror.anlx.net/CPAN/ rsync://mirror.bytemark.co.uk/CPAN/ rsync://mirror.sax.uk.as61049.net/CPAN/ rsync://rsync.mirrorservice.org/cpan.perl.org/CPAN/ rsync://ftp.ticklers.org/CPAN/ rsync://mirrors.uk2.net/CPAN/ rsync://CPAN.mirror.rafal.ca/CPAN/ rsync://mirror.csclub.uwaterloo.ca/CPAN/ rsync://mirrors.namecheap.com/CPAN/ rsync://mirrors.syringanetworks.net/CPAN/ rsync://mirror.team-cymru.org/CPAN/ rsync://debian.cse.msu.edu/cpan/ rsync://mirrors-usa.go-parts.com/mirrors/cpan/ rsync://rsync.hoovism.com/CPAN/ rsync://mirror.cc.columbia.edu/cpan/ rsync://noodle.portalus.net/CPAN/ rsync://mirrors.rit.edu/cpan/ rsync://mirrors.ibiblio.org/CPAN/ rsync://cpan.pair.com/CPAN/ rsync://cpan.cs.utah.edu/CPAN/ rsync://mirror.cogentco.com/CPAN/ rsync://mirror.jmu.edu/CPAN/ rsync://mirror.us.leaseweb.net/CPAN/ rsync://cpan.mirror.digitalpacific.com.au/cpan/ rsync://mirror.internode.on.net/cpan/ rsync://uberglobalmirror.com/cpan/ rsync://cpan.lagoon.nc/cpan/ rsync://mirrors.mmgdesigns.com.ar/CPAN/ For an up-to-date listing of CPAN sites, see L<https://www.cpan.org/SITES> or L<ftp://www.cpan.org/SITES>. =head1 Modules: Creation, Use, and Abuse (The following section is borrowed directly from Tim Bunce's modules file, available at your nearest CPAN site.) Perl implements a class using a package, but the presence of a package doesn't imply the presence of a class. A package is just a namespace. A class is a package that provides subroutines that can be used as methods. A method is just a subroutine that expects, as its first argument, either the name of a package (for "static" methods), or a reference to something (for "virtual" methods). A module is a file that (by convention) provides a class of the same name (sans the .pm), plus an import method in that class that can be called to fetch exported symbols. This module may implement some of its methods by loading dynamic C or C++ objects, but that should be totally transparent to the user of the module. Likewise, the module might set up an AUTOLOAD function to slurp in subroutine definitions on demand, but this is also transparent. Only the F<.pm> file is required to exist. See L<perlsub>, L<perlobj>, and L<AutoLoader> for details about the AUTOLOAD mechanism. =head2 Guidelines for Module Creation =over 4 =item * Do similar modules already exist in some form? If so, please try to reuse the existing modules either in whole or by inheriting useful features into a new class. If this is not practical try to get together with the module authors to work on extending or enhancing the functionality of the existing modules. A perfect example is the plethora of packages in perl4 for dealing with command line options. If you are writing a module to expand an already existing set of modules, please coordinate with the author of the package. It helps if you follow the same naming scheme and module interaction scheme as the original author. =item * Try to design the new module to be easy to extend and reuse. Try to C<use warnings;> (or C<use warnings qw(...);>). Remember that you can add C<no warnings qw(...);> to individual blocks of code that need less warnings. Use blessed references. Use the two argument form of bless to bless into the class name given as the first parameter of the constructor, e.g.,: sub new { my $class = shift; return bless {}, $class; } or even this if you'd like it to be used as either a static or a virtual method. sub new { my $self = shift; my $class = ref($self) || $self; return bless {}, $class; } Pass arrays as references so more parameters can be added later (it's also faster). Convert functions into methods where appropriate. Split large methods into smaller more flexible ones. Inherit methods from other modules if appropriate. Avoid class name tests like: C<die "Invalid" unless ref $ref eq 'FOO'>. Generally you can delete the C<eq 'FOO'> part with no harm at all. Let the objects look after themselves! Generally, avoid hard-wired class names as far as possible. Avoid C<< $r->Class::func() >> where using C<@ISA=qw(... Class ...)> and C<< $r->func() >> would work. Use autosplit so little used or newly added functions won't be a burden to programs that don't use them. Add test functions to the module after __END__ either using AutoSplit or by saying: eval join('',<main::DATA>) || die $@ unless caller(); Does your module pass the 'empty subclass' test? If you say C<@SUBCLASS::ISA = qw(YOURCLASS);> your applications should be able to use SUBCLASS in exactly the same way as YOURCLASS. For example, does your application still work if you change: C<< $obj = YOURCLASS->new(); >> into: C<< $obj = SUBCLASS->new(); >> ? Avoid keeping any state information in your packages. It makes it difficult for multiple other packages to use yours. Keep state information in objects. Always use B<-w>. Try to C<use strict;> (or C<use strict qw(...);>). Remember that you can add C<no strict qw(...);> to individual blocks of code that need less strictness. Always use B<-w>. Follow the guidelines in L<perlstyle>. Always use B<-w>. =item * Some simple style guidelines The perlstyle manual supplied with Perl has many helpful points. Coding style is a matter of personal taste. Many people evolve their style over several years as they learn what helps them write and maintain good code. Here's one set of assorted suggestions that seem to be widely used by experienced developers: Use underscores to separate words. It is generally easier to read $var_names_like_this than $VarNamesLikeThis, especially for non-native speakers of English. It's also a simple rule that works consistently with VAR_NAMES_LIKE_THIS. Package/Module names are an exception to this rule. Perl informally reserves lowercase module names for 'pragma' modules like integer and strict. Other modules normally begin with a capital letter and use mixed case with no underscores (need to be short and portable). You may find it helpful to use letter case to indicate the scope or nature of a variable. For example: $ALL_CAPS_HERE constants only (beware clashes with Perl vars) $Some_Caps_Here package-wide global/static $no_caps_here function scope my() or local() variables Function and method names seem to work best as all lowercase. e.g., C<< $obj->as_string() >>. You can use a leading underscore to indicate that a variable or function should not be used outside the package that defined it. =item * Select what to export. Do NOT export method names! Do NOT export anything else by default without a good reason! Exports pollute the namespace of the module user. If you must export try to use @EXPORT_OK in preference to @EXPORT and avoid short or common names to reduce the risk of name clashes. Generally anything not exported is still accessible from outside the module using the ModuleName::item_name (or C<< $blessed_ref->method >>) syntax. By convention you can use a leading underscore on names to indicate informally that they are 'internal' and not for public use. (It is actually possible to get private functions by saying: C<my $subref = sub { ... }; &$subref;>. But there's no way to call that directly as a method, because a method must have a name in the symbol table.) As a general rule, if the module is trying to be object oriented then export nothing. If it's just a collection of functions then @EXPORT_OK anything but use @EXPORT with caution. =item * Select a name for the module. This name should be as descriptive, accurate, and complete as possible. Avoid any risk of ambiguity. Always try to use two or more whole words. Generally the name should reflect what is special about what the module does rather than how it does it. Please use nested module names to group informally or categorize a module. There should be a very good reason for a module not to have a nested name. Module names should begin with a capital letter. Having 57 modules all called Sort will not make life easy for anyone (though having 23 called Sort::Quick is only marginally better :-). Imagine someone trying to install your module alongside many others. If you are developing a suite of related modules/classes it's good practice to use nested classes with a common prefix as this will avoid namespace clashes. For example: Xyz::Control, Xyz::View, Xyz::Model etc. Use the modules in this list as a naming guide. If adding a new module to a set, follow the original author's standards for naming modules and the interface to methods in those modules. If developing modules for private internal or project specific use, that will never be released to the public, then you should ensure that their names will not clash with any future public module. You can do this either by using the reserved Local::* category or by using a category name that includes an underscore like Foo_Corp::*. To be portable each component of a module name should be limited to 11 characters. If it might be used on MS-DOS then try to ensure each is unique in the first 8 characters. Nested modules make this easier. For additional guidance on the naming of modules, please consult: https://pause.perl.org/pause/query?ACTION=pause_namingmodules or send mail to the <module-authors@perl.org> mailing list. =item * Have you got it right? How do you know that you've made the right decisions? Have you picked an interface design that will cause problems later? Have you picked the most appropriate name? Do you have any questions? The best way to know for sure, and pick up many helpful suggestions, is to ask someone who knows. The <module-authors@perl.org> mailing list is useful for this purpose; it's also accessible via news interface as perl.module-authors at nntp.perl.org. All you need to do is post a short summary of the module, its purpose and interfaces. A few lines on each of the main methods is probably enough. (If you post the whole module it might be ignored by busy people - generally the very people you want to read it!) Don't worry about posting if you can't say when the module will be ready - just say so in the message. It might be worth inviting others to help you, they may be able to complete it for you! =item * README and other Additional Files. It's well known that software developers usually fully document the software they write. If, however, the world is in urgent need of your software and there is not enough time to write the full documentation please at least provide a README file containing: =over 10 =item * A description of the module/package/extension etc. =item * A copyright notice - see below. =item * Prerequisites - what else you may need to have. =item * How to build it - possible changes to Makefile.PL etc. =item * How to install it. =item * Recent changes in this release, especially incompatibilities =item * Changes / enhancements you plan to make in the future. =back If the README file seems to be getting too large you may wish to split out some of the sections into separate files: INSTALL, Copying, ToDo etc. =over 4 =item * Adding a Copyright Notice. How you choose to license your work is a personal decision. The general mechanism is to assert your Copyright and then make a declaration of how others may copy/use/modify your work. Perl, for example, is supplied with two types of licence: The GNU GPL and The Artistic Licence (see the files README, Copying, and Artistic, or L<perlgpl> and L<perlartistic>). Larry has good reasons for NOT just using the GNU GPL. My personal recommendation, out of respect for Larry, Perl, and the Perl community at large is to state something simply like: Copyright (c) 1995 Your Name. All rights reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. This statement should at least appear in the README file. You may also wish to include it in a Copying file and your source files. Remember to include the other words in addition to the Copyright. =item * Give the module a version/issue/release number. To be fully compatible with the Exporter and MakeMaker modules you should store your module's version number in a non-my package variable called $VERSION. This should be a positive floating point number with at least two digits after the decimal (i.e., hundredths, e.g, C<$VERSION = "0.01">). Don't use a "1.3.2" style version. See L<Exporter> for details. It may be handy to add a function or method to retrieve the number. Use the number in announcements and archive file names when releasing the module (ModuleName-1.02.tar.Z). See perldoc ExtUtils::MakeMaker.pm for details. =item * How to release and distribute a module. If possible, register the module with CPAN. Follow the instructions and links on: https://www.cpan.org/modules/04pause.html and upload to: https://pause.perl.org/ and notify <modules@perl.org>. This will allow anyone to install your module using the C<cpan> tool distributed with Perl. By using the WWW interface you can ask the Upload Server to mirror your modules from your ftp or WWW site into your own directory on CPAN! =item * Take care when changing a released module. Always strive to remain compatible with previous released versions. Otherwise try to add a mechanism to revert to the old behavior if people rely on it. Document incompatible changes. =back =back =head2 Guidelines for Converting Perl 4 Library Scripts into Modules =over 4 =item * There is no requirement to convert anything. If it ain't broke, don't fix it! Perl 4 library scripts should continue to work with no problems. You may need to make some minor changes (like escaping non-array @'s in double quoted strings) but there is no need to convert a .pl file into a Module for just that. =item * Consider the implications. All Perl applications that make use of the script will need to be changed (slightly) if the script is converted into a module. Is it worth it unless you plan to make other changes at the same time? =item * Make the most of the opportunity. If you are going to convert the script to a module you can use the opportunity to redesign the interface. The guidelines for module creation above include many of the issues you should consider. =item * The pl2pm utility will get you started. This utility will read *.pl files (given as parameters) and write corresponding *.pm files. The pl2pm utilities does the following: =over 10 =item * Adds the standard Module prologue lines =item * Converts package specifiers from ' to :: =item * Converts die(...) to croak(...) =item * Several other minor changes =back Being a mechanical process pl2pm is not bullet proof. The converted code will need careful checking, especially any package statements. Don't delete the original .pl file till the new .pm one works! =back =head2 Guidelines for Reusing Application Code =over 4 =item * Complete applications rarely belong in the Perl Module Library. =item * Many applications contain some Perl code that could be reused. Help save the world! Share your code in a form that makes it easy to reuse. =item * Break-out the reusable code into one or more separate module files. =item * Take the opportunity to reconsider and redesign the interfaces. =item * In some cases the 'application' can then be reduced to a small fragment of code built on top of the reusable modules. In these cases the application could invoked as: % perl -e 'use Module::Name; method(@ARGV)' ... or % perl -mModule::Name ... (in perl5.002 or higher) =back =head1 NOTE Perl does not enforce private and public parts of its modules as you may have been used to in other languages like C++, Ada, or Modula-17. Perl doesn't have an infatuation with enforced privacy. It would prefer that you stayed out of its living room because you weren't invited, not because it has a shotgun. The module and its user have a contract, part of which is common law, and part of which is "written". Part of the common law contract is that a module doesn't pollute any namespace it wasn't asked to. The written contract for the module (A.K.A. documentation) may make other provisions. But then you know when you C<use RedefineTheWorld> that you're redefining the world and willing to take the consequences. =cut ex: set ro: perl5244delta.pod 0000644 00000010636 15125556335 0007563 0 ustar 00 =encoding utf8 =head1 NAME perl5244delta - what is new for perl v5.24.4 =head1 DESCRIPTION This document describes differences between the 5.24.3 release and the 5.24.4 release. If you are upgrading from an earlier release such as 5.24.2, first read L<perl5243delta>, which describes differences between 5.24.2 and 5.24.3. =head1 Security =head2 [CVE-2018-6797] heap-buffer-overflow (WRITE of size 1) in S_regatom (regcomp.c) A crafted regular expression could cause a heap buffer write overflow, with control over the bytes written. L<[perl #132227]|https://rt.perl.org/Public/Bug/Display.html?id=132227> =head2 [CVE-2018-6798] Heap-buffer-overflow in Perl__byte_dump_string (utf8.c) Matching a crafted locale dependent regular expression could cause a heap buffer read overflow and potentially information disclosure. L<[perl #132063]|https://rt.perl.org/Public/Bug/Display.html?id=132063> =head2 [CVE-2018-6913] heap-buffer-overflow in S_pack_rec C<pack()> could cause a heap buffer write overflow with a large item count. L<[perl #131844]|https://rt.perl.org/Public/Bug/Display.html?id=131844> =head2 Assertion failure in Perl__core_swash_init (utf8.c) Control characters in a supposed Unicode property name could cause perl to crash. This has been fixed. L<[perl #132055]|https://rt.perl.org/Public/Bug/Display.html?id=132055> L<[perl #132553]|https://rt.perl.org/Public/Bug/Display.html?id=132553> L<[perl #132658]|https://rt.perl.org/Public/Bug/Display.html?id=132658> =head1 Incompatible Changes There are no changes intentionally incompatible with 5.24.3. If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Module::CoreList> has been upgraded from version 5.20170922_24 to 5.20180414_24. =back =head1 Selected Bug Fixes =over 4 =item * The C<readpipe()> built-in function now checks at compile time that it has only one parameter expression, and puts it in scalar context, thus ensuring that it doesn't corrupt the stack at runtime. L<[perl #4574]|https://rt.perl.org/Public/Bug/Display.html?id=4574> =back =head1 Acknowledgements Perl 5.24.4 represents approximately 7 months of development since Perl 5.24.3 and contains approximately 2,400 lines of changes across 49 files from 12 authors. Excluding auto-generated files, documentation and release tools, there were approximately 1,300 lines of changes to 12 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.24.4: Abigail, Chris 'BinGOs' Williams, John SJ Anderson, Karen Etheridge, Karl Williamson, Renee Baecker, Sawyer X, Steve Hay, Todd Rinaldo, Tony Cook, Yves Orton, Zefram. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at L<https://rt.perl.org/> . There may also be information at L<http://www.perl.org/> , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications which make it inappropriate to send to a publicly archived mailing list, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlpolicy.pod 0000644 00000063702 15125556335 0007454 0 ustar 00 =encoding utf8 =head1 NAME perlpolicy - Various and sundry policies and commitments related to the Perl core =head1 DESCRIPTION This document is the master document which records all written policies about how the Perl 5 Porters collectively develop and maintain the Perl core. =head1 GOVERNANCE =head2 Perl 5 Porters Subscribers to perl5-porters (the porters themselves) come in several flavours. Some are quiet curious lurkers, who rarely pitch in and instead watch the ongoing development to ensure they're forewarned of new changes or features in Perl. Some are representatives of vendors, who are there to make sure that Perl continues to compile and work on their platforms. Some patch any reported bug that they know how to fix, some are actively patching their pet area (threads, Win32, the regexp -engine), while others seem to do nothing but complain. In other words, it's your usual mix of technical people. Among these people are the core Perl team. These are trusted volunteers involved in the ongoing development of the Perl language and interpreter. They are not required to be language developers or committers. Over this group of porters presides Larry Wall. He has the final word in what does and does not change in any of the Perl programming languages. These days, Larry spends most of his time on Raku, while Perl 5 is shepherded by a steering council of porters responsible for deciding what goes into each release and ensuring that releases happen on a regular basis. Larry sees Perl development along the lines of the US government: there's the Legislature (the porters, represented by the core team), the Executive branch (the steering council), and the Supreme Court (Larry). The legislature can discuss and submit patches to the executive branch all they like, but the executive branch is free to veto them. Rarely, the Supreme Court will side with the executive branch over the legislature, or the legislature over the executive branch. Mostly, however, the legislature and the executive branch are supposed to get along and work out their differences without impeachment or court cases. You might sometimes see reference to Rule 1 and Rule 2. Larry's power as Supreme Court is expressed in The Rules: =over 4 =item 1 Larry is always by definition right about how Perl should behave. This means he has final veto power on the core functionality. =item 2 Larry is allowed to change his mind about any matter at a later date, regardless of whether he previously invoked Rule 1. =back Got that? Larry is always right, even when he was wrong. It's rare to see either Rule exercised, but they are often alluded to. For the specifics on how the members of the core team and steering council are elected or rotated, consult L<perlgov>, which spells it all out in detail. =head1 MAINTENANCE AND SUPPORT Perl 5 is developed by a community, not a corporate entity. Every change contributed to the Perl core is the result of a donation. Typically, these donations are contributions of code or time by individual members of our community. On occasion, these donations come in the form of corporate or organizational sponsorship of a particular individual or project. As a volunteer organization, the commitments we make are heavily dependent on the goodwill and hard work of individuals who have no obligation to contribute to Perl. That being said, we value Perl's stability and security and have long had an unwritten covenant with the broader Perl community to support and maintain releases of Perl. This document codifies the support and maintenance commitments that the Perl community should expect from Perl's developers: =over =item * We "officially" support the two most recent stable release series. 5.26.x and earlier are now out of support. As of the release of 5.32.0, we will "officially" end support for Perl 5.28.x, other than providing security updates as described below. =item * To the best of our ability, we will attempt to fix critical issues in the two most recent stable 5.x release series. Fixes for the current release series take precedence over fixes for the previous release series. =item * To the best of our ability, we will provide "critical" security patches / releases for any major version of Perl whose 5.x.0 release was within the past three years. We can only commit to providing these for the most recent .y release in any 5.x.y series. =item * We will not provide security updates or bug fixes for development releases of Perl. =item * We encourage vendors to ship the most recent supported release of Perl at the time of their code freeze. =item * As a vendor, you may have a requirement to backport security fixes beyond our 3 year support commitment. We can provide limited support and advice to you as you do so and, where possible will try to apply those patches to the relevant -maint branches in git, though we may or may not choose to make numbered releases or "official" patches available. See L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details on how to begin that process. =back =head1 BACKWARD COMPATIBILITY AND DEPRECATION Our community has a long-held belief that backward-compatibility is a virtue, even when the functionality in question is a design flaw. We would all love to unmake some mistakes we've made over the past decades. Living with every design error we've ever made can lead to painful stagnation. Unwinding our mistakes is very, very difficult. Doing so without actively harming our users is nearly impossible. Lately, ignoring or actively opposing compatibility with earlier versions of Perl has come into vogue. Sometimes, a change is proposed which wants to usurp syntax which previously had another meaning. Sometimes, a change wants to improve previously-crazy semantics. Down this road lies madness. Requiring end-user programmers to change just a few language constructs, even language constructs which no well-educated developer would ever intentionally use is tantamount to saying "you should not upgrade to a new release of Perl unless you have 100% test coverage and can do a full manual audit of your codebase." If we were to have tools capable of reliably upgrading Perl source code from one version of Perl to another, this concern could be significantly mitigated. We want to ensure that Perl continues to grow and flourish in the coming years and decades, but not at the expense of our user community. Existing syntax and semantics should only be marked for destruction in very limited circumstances. If they are believed to be very rarely used, stand in the way of actual improvement to the Perl language or perl interpreter, and if affected code can be easily updated to continue working, they may be considered for removal. When in doubt, caution dictates that we will favor backward compatibility. When a feature is deprecated, a statement of reasoning describing the decision process will be posted, and a link to it will be provided in the relevant perldelta documents. Using a lexical pragma to enable or disable legacy behavior should be considered when appropriate, and in the absence of any pragma legacy behavior should be enabled. Which backward-incompatible changes are controlled implicitly by a 'use v5.x.y' is a decision which should be made by the steering council in consultation with the community. Historically, we've held ourselves to a far higher standard than backward-compatibility -- bugward-compatibility. Any accident of implementation or unintentional side-effect of running some bit of code has been considered to be a feature of the language to be defended with the same zeal as any other feature or functionality. No matter how frustrating these unintentional features may be to us as we continue to improve Perl, these unintentional features often deserve our protection. It is very important that existing software written in Perl continue to work correctly. If end-user developers have adopted a bug as a feature, we need to treat it as such. New syntax and semantics which don't break existing language constructs and syntax have a much lower bar. They merely need to prove themselves to be useful, elegant, well designed, and well tested. In most cases, these additions will be marked as I<experimental> for some time. See below for more on that. =head2 Terminology To make sure we're talking about the same thing when we discuss the removal of features or functionality from the Perl core, we have specific definitions for a few words and phrases. =over =item experimental If something in the Perl core is marked as B<experimental>, we may change its behaviour, deprecate or remove it without notice. While we'll always do our best to smooth the transition path for users of experimental features, you should contact the perl5-porters mailinglist if you find an experimental feature useful and want to help shape its future. Experimental features must be experimental in two stable releases before being marked non-experimental. Experimental features will only have their experimental status revoked when they no longer have any design-changing bugs open against them and when they have remained unchanged in behavior for the entire length of a development cycle. In other words, a feature present in v5.20.0 may be marked no longer experimental in v5.22.0 if and only if its behavior is unchanged throughout all of v5.21. =item deprecated If something in the Perl core is marked as B<deprecated>, we may remove it from the core in the future, though we might not. Generally, backward incompatible changes will have deprecation warnings for two release cycles before being removed, but may be removed after just one cycle if the risk seems quite low or the benefits quite high. As of Perl 5.12, deprecated features and modules warn the user as they're used. When a module is deprecated, it will also be made available on CPAN. Installing it from CPAN will silence deprecation warnings for that module. If you use a deprecated feature or module and believe that its removal from the Perl core would be a mistake, please contact the perl5-porters mailinglist and plead your case. We don't deprecate things without a good reason, but sometimes there's a counterargument we haven't considered. Historically, we did not distinguish between "deprecated" and "discouraged" features. =item discouraged From time to time, we may mark language constructs and features which we consider to have been mistakes as B<discouraged>. Discouraged features aren't currently candidates for removal, but we may later deprecate them if they're found to stand in the way of a significant improvement to the Perl core. =item removed Once a feature, construct or module has been marked as deprecated, we may remove it from the Perl core. Unsurprisingly, we say we've B<removed> these things. When a module is removed, it will no longer ship with Perl, but will continue to be available on CPAN. =back =head1 MAINTENANCE BRANCHES New releases of maintenance branches should only contain changes that fall into one of the "acceptable" categories set out below, but must not contain any changes that fall into one of the "unacceptable" categories. (For example, a fix for a crashing bug must not be included if it breaks binary compatibility.) It is not necessary to include every change meeting these criteria, and in general the focus should be on addressing security issues, crashing bugs, regressions and serious installation issues. The temptation to include a plethora of minor changes that don't affect the installation or execution of perl (e.g. spelling corrections in documentation) should be resisted in order to reduce the overall risk of overlooking something. The intention is to create maintenance releases which are both worthwhile and which users can have full confidence in the stability of. (A secondary concern is to avoid burning out the maint-release manager or overwhelming other committers voting on changes to be included (see L</"Getting changes into a maint branch"> below).) The following types of change may be considered acceptable, as long as they do not also fall into any of the "unacceptable" categories set out below: =over =item * Patches that fix CVEs or security issues. These changes should be passed using the security reporting mechanism rather than applied directly; see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION>. =item * Patches that fix crashing bugs, assertion failures and memory corruption but which do not otherwise change perl's functionality or negatively impact performance. =item * Patches that fix regressions in perl's behavior relative to previous releases, no matter how old the regression, since some people may upgrade from very old versions of perl to the latest version. =item * Patches that fix bugs in features that were new in the corresponding 5.x.0 stable release. =item * Patches that fix anything which prevents or seriously impacts the build or installation of perl. =item * Portability fixes, such as changes to Configure and the files in the hints/ folder. =item * Minimal patches that fix platform-specific test failures. =item * Documentation updates that correct factual errors, explain significant bugs or deficiencies in the current implementation, or fix broken markup. =item * Updates to dual-life modules should consist of minimal patches to fix crashing bugs or security issues (as above). Any changes made to dual-life modules for which CPAN is canonical should be coordinated with the upstream author. =back The following types of change are NOT acceptable: =over =item * Patches that break binary compatibility. (Please talk to the steering council.) =item * Patches that add or remove features. =item * Patches that add new warnings or errors or deprecate features. =item * Ports of Perl to a new platform, architecture or OS release that involve changes to the implementation. =item * New versions of dual-life modules should NOT be imported into maint. Those belong in the next stable series. =back If there is any question about whether a given patch might merit inclusion in a maint release, then it almost certainly should not be included. =head2 Getting changes into a maint branch Historically, only the single-person project manager cherry-picked changes from bleadperl into maintperl. This has scaling problems. At the same time, maintenance branches of stable versions of Perl need to be treated with great care. To that end, as of Perl 5.12, we have a new process for maint branches. Any committer may cherry-pick any commit from blead to a maint branch by first adding an entry to the relevant voting file in the maint-votes branch announcing the commit as a candidate for back-porting, and then waiting for at least two other committers to add their votes in support of this (i.e. a total of at least three votes is required before a commit may be back-ported). Most of the work involved in both rounding up a suitable set of candidate commits and cherry-picking those for which three votes have been cast will be done by the maint branch release manager, but anyone else is free to add other proposals if they're keen to ensure certain fixes don't get overlooked or fear they already have been. Other voting mechanisms may also be used instead (e.g. sending mail to perl5-porters and at least two other committers responding to the list giving their assent), as long as the same number of votes is gathered in a transparent manner. Specifically, proposals of which changes to cherry-pick must be visible to everyone on perl5-porters so that the views of everyone interested may be heard. It is not necessary for voting to be held on cherry-picking perldelta entries associated with changes that have already been cherry-picked, nor for the maint-release manager to obtain votes on changes required by the F<Porting/release_managers_guide.pod> where such changes can be applied by the means of cherry-picking from blead. =head1 CONTRIBUTED MODULES =head2 A Social Contract about Artistic Control What follows is a statement about artistic control, defined as the ability of authors of packages to guide the future of their code and maintain control over their work. It is a recognition that authors should have control over their work, and that it is a responsibility of the rest of the Perl community to ensure that they retain this control. It is an attempt to document the standards to which we, as Perl developers, intend to hold ourselves. It is an attempt to write down rough guidelines about the respect we owe each other as Perl developers. This statement is not a legal contract. This statement is not a legal document in any way, shape, or form. Perl is distributed under the GNU Public License and under the Artistic License; those are the precise legal terms. This statement isn't about the law or licenses. It's about community, mutual respect, trust, and good-faith cooperation. We recognize that the Perl core, defined as the software distributed with the heart of Perl itself, is a joint project on the part of all of us. From time to time, a script, module, or set of modules (hereafter referred to simply as a "module") will prove so widely useful and/or so integral to the correct functioning of Perl itself that it should be distributed with the Perl core. This should never be done without the author's explicit consent, and a clear recognition on all parts that this means the module is being distributed under the same terms as Perl itself. A module author should realize that inclusion of a module into the Perl core will necessarily mean some loss of control over it, since changes may occasionally have to be made on short notice or for consistency with the rest of Perl. Once a module has been included in the Perl core, however, everyone involved in maintaining Perl should be aware that the module is still the property of the original author unless the original author explicitly gives up their ownership of it. In particular: =over =item * The version of the module in the Perl core should still be considered the work of the original author. All patches, bug reports, and so forth should be fed back to them. Their development directions should be respected whenever possible. =item * Patches may be applied by the steering council without the explicit cooperation of the module author if and only if they are very minor, time-critical in some fashion (such as urgent security fixes), or if the module author cannot be reached. Those patches must still be given back to the author when possible, and if the author decides on an alternate fix in their version, that fix should be strongly preferred unless there is a serious problem with it. Any changes not endorsed by the author should be marked as such, and the contributor of the change acknowledged. =item * The version of the module distributed with Perl should, whenever possible, be the latest version of the module as distributed by the author (the latest non-beta version in the case of public Perl releases), although the steering council may hold off on upgrading the version of the module distributed with Perl to the latest version until the latest version has had sufficient testing. =back In other words, the author of a module should be considered to have final say on modifications to their module whenever possible (bearing in mind that it's expected that everyone involved will work together and arrive at reasonable compromises when there are disagreements). As a last resort, however: If the author's vision of the future of their module is sufficiently different from the vision of the steering council and perl5-porters as a whole so as to cause serious problems for Perl, the steering council may choose to formally fork the version of the module in the Perl core from the one maintained by the author. This should not be done lightly and should B<always> if at all possible be done only after direct input from Larry. If this is done, it must then be made explicit in the module as distributed with the Perl core that it is a forked version and that while it is based on the original author's work, it is no longer maintained by them. This must be noted in both the documentation and in the comments in the source of the module. Again, this should be a last resort only. Ideally, this should never happen, and every possible effort at cooperation and compromise should be made before doing this. If it does prove necessary to fork a module for the overall health of Perl, proper credit must be given to the original author in perpetuity and the decision should be constantly re-evaluated to see if a remerging of the two branches is possible down the road. In all dealings with contributed modules, everyone maintaining Perl should keep in mind that the code belongs to the original author, that they may not be on perl5-porters at any given time, and that a patch is not official unless it has been integrated into the author's copy of the module. To aid with this, and with points #1, #2, and #3 above, contact information for the authors of all contributed modules should be kept with the Perl distribution. Finally, the Perl community as a whole recognizes that respect for ownership of code, respect for artistic control, proper credit, and active effort to prevent unintentional code skew or communication gaps is vital to the health of the community and Perl itself. Members of a community should not normally have to resort to rules and laws to deal with each other, and this document, although it contains rules so as to be clear, is about an attitude and general approach. The first step in any dispute should be open communication, respect for opposing views, and an attempt at a compromise. In nearly every circumstance nothing more will be necessary, and certainly no more drastic measure should be used until every avenue of communication and discussion has failed. =head1 DOCUMENTATION Perl's documentation is an important resource for our users. It's incredibly important for Perl's documentation to be reasonably coherent and to accurately reflect the current implementation. Just as P5P collectively maintains the codebase, we collectively maintain the documentation. Writing a particular bit of documentation doesn't give an author control of the future of that documentation. At the same time, just as source code changes should match the style of their surrounding blocks, so should documentation changes. Examples in documentation should be illustrative of the concept they're explaining. Sometimes, the best way to show how a language feature works is with a small program the reader can run without modification. More often, examples will consist of a snippet of code containing only the "important" bits. The definition of "important" varies from snippet to snippet. Sometimes it's important to declare C<use strict> and C<use warnings>, initialize all variables and fully catch every error condition. More often than not, though, those things obscure the lesson the example was intended to teach. As Perl is developed by a global team of volunteers, our documentation often contains spellings which look funny to I<somebody>. Choice of American/British/Other spellings is left as an exercise for the author of each bit of documentation. When patching documentation, try to emulate the documentation around you, rather than changing the existing prose. In general, documentation should describe what Perl does "now" rather than what it used to do. It's perfectly reasonable to include notes in documentation about how behaviour has changed from previous releases, but, with very few exceptions, documentation isn't "dual-life" -- it doesn't need to fully describe how all old versions used to work. =head1 STANDARDS OF CONDUCT The official forum for the development of perl is the perl5-porters mailing list, mentioned above, and its bugtracker at GitHub. Posting to the list and the bugtracker is not a right: all participants in discussion are expected to adhere to a standard of conduct. =over 4 =item * Always be civil. =item * Heed the moderators. =back Civility is simple: stick to the facts while avoiding demeaning remarks, belittling other individuals, sarcasm, or a presumption of bad faith. It is not enough to be factual. You must also be civil. Responding in kind to incivility is not acceptable. If you relay otherwise-unposted comments to the list from a third party, you take responsibility for the content of those comments, and you must therefore ensure that they are civil. While civility is required, kindness is encouraged; if you have any doubt about whether you are being civil, simply ask yourself, "Am I being kind?" and aspire to that. If the list moderators tell you that you are not being civil, carefully consider how your words have appeared before responding in any way. Were they kind? You may protest, but repeated protest in the face of a repeatedly reaffirmed decision is not acceptable. Repeatedly protesting about the moderators' decisions regarding a third party is also unacceptable, as is continuing to initiate off-list contact with the moderators about their decisions. Unacceptable behavior will result in a public and clearly identified warning. A second instance of unacceptable behavior from the same individual will result in removal from the mailing list and GitHub issue tracker, for a period of one calendar month. The rationale for this is to provide an opportunity for the person to change the way they act. After the time-limited ban has been lifted, a third instance of unacceptable behavior will result in a further public warning. A fourth or subsequent instance will result in an indefinite ban. The rationale is that, in the face of an apparent refusal to change behavior, we must protect other community members from future unacceptable actions. The moderators may choose to lift an indefinite ban if the person in question affirms they will not transgress again. Removals, like warnings, are public. The list of moderators will be public knowledge. At present, it is: Karen Etheridge, Ricardo Signes, Sawyer X, Steffen Müller, Todd Rinaldo, Aaron Crane. =head1 CREDITS "Social Contract about Contributed Modules" originally by Russ Allbery E<lt>rra@stanford.eduE<gt> and the perl5-porters. perl5241delta.pod 0000644 00000020027 15125556335 0007553 0 ustar 00 =encoding utf8 =head1 NAME perl5241delta - what is new for perl v5.24.1 =head1 DESCRIPTION This document describes differences between the 5.24.0 release and the 5.24.1 release. If you are upgrading from an earlier release such as 5.22.0, first read L<perl5240delta>, which describes differences between 5.22.0 and 5.24.0. =head1 Security =head2 B<-Di> switch is now required for PerlIO debugging output Previously PerlIO debugging output would be sent to the file specified by the C<PERLIO_DEBUG> environment variable if perl wasn't running setuid and the B<-T> or B<-t> switches hadn't been parsed yet. If perl performed output at a point where it hadn't yet parsed its switches this could result in perl creating or overwriting the file named by C<PERLIO_DEBUG> even when the B<-T> switch had been supplied. Perl now requires the B<-Di> switch to produce PerlIO debugging output. By default this is written to C<stderr>, but can optionally be redirected to a file by setting the C<PERLIO_DEBUG> environment variable. If perl is running setuid or the B<-T> switch was supplied C<PERLIO_DEBUG> is ignored and the debugging output is sent to C<stderr> as for any other B<-D> switch. =head2 Core modules and tools no longer search F<"."> for optional modules The tools and many modules supplied in core no longer search the default current directory entry in L<C<@INC>|perlvar/@INC> for optional modules. For example, L<Storable> will remove the final F<"."> from C<@INC> before trying to load L<Log::Agent>. This prevents an attacker injecting an optional module into a process run by another user where the current directory is writable by the attacker, e.g. the F</tmp> directory. In most cases this removal should not cause problems, but difficulties were encountered with L<base>, which treats every module name supplied as optional. These difficulties have not yet been resolved, so for this release there are no changes to L<base>. We hope to have a fix for L<base> in Perl 5.24.2. To protect your own code from this attack, either remove the default F<"."> entry from C<@INC> at the start of your script, so: #!/usr/bin/perl use strict; ... becomes: #!/usr/bin/perl BEGIN { pop @INC if $INC[-1] eq '.' } use strict; ... or for modules, remove F<"."> from a localized C<@INC>, so: my $can_foo = eval { require Foo; } becomes: my $can_foo = eval { local @INC = @INC; pop @INC if $INC[-1] eq '.'; require Foo; }; =head1 Incompatible Changes Other than the security changes above there are no changes intentionally incompatible with Perl 5.24.0. If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Archive::Tar> has been upgraded from version 2.04 to 2.04_01. =item * L<bignum> has been upgraded from version 0.42 to 0.42_01. =item * L<CPAN> has been upgraded from version 2.11 to 2.11_01. =item * L<Digest> has been upgraded from version 1.17 to 1.17_01. =item * L<Digest::SHA> has been upgraded from version 5.95 to 5.95_01. =item * L<Encode> has been upgraded from version 2.80 to 2.80_01. =item * L<ExtUtils::MakeMaker> has been upgraded from version 7.10_01 to 7.10_02. =item * L<File::Fetch> has been upgraded from version 0.48 to 0.48_01. =item * L<File::Spec> has been upgraded from version 3.63 to 3.63_01. =item * L<HTTP::Tiny> has been upgraded from version 0.056 to 0.056_001. =item * L<IO> has been upgraded from version 1.36 to 1.36_01. =item * The IO-Compress modules have been upgraded from version 2.069 to 2.069_001. =item * L<IPC::Cmd> has been upgraded from version 0.92 to 0.92_01. =item * L<JSON::PP> has been upgraded from version 2.27300 to 2.27300_01. =item * L<Locale::Maketext> has been upgraded from version 1.26 to 1.26_01. =item * L<Locale::Maketext::Simple> has been upgraded from version 0.21 to 0.21_01. =item * L<Memoize> has been upgraded from version 1.03 to 1.03_01. =item * L<Module::CoreList> has been upgraded from version 5.20160506 to 5.20170114_24. =item * L<Net::Ping> has been upgraded from version 2.43 to 2.43_01. =item * L<Parse::CPAN::Meta> has been upgraded from version 1.4417 to 1.4417_001. =item * L<Pod::Html> has been upgraded from version 1.22 to 1.2201. =item * L<Pod::Perldoc> has been upgraded from version 3.25_02 to 3.25_03. =item * L<Storable> has been upgraded from version 2.56 to 2.56_01. =item * L<Sys::Syslog> has been upgraded from version 0.33 to 0.33_01. =item * L<Test> has been upgraded from version 1.28 to 1.28_01. =item * L<Test::Harness> has been upgraded from version 3.36 to 3.36_01. =item * L<XSLoader> has been upgraded from version 0.21 to 0.22, fixing a security hole in which binary files could be loaded from a path outside of C<@INC>. L<[perl #128528]|https://rt.perl.org/Public/Bug/Display.html?id=128528> =back =head1 Documentation =head2 Changes to Existing Documentation =head3 L<perlapio> =over 4 =item * The documentation of C<PERLIO_DEBUG> has been updated. =back =head3 L<perlrun> =over 4 =item * The new B<-Di> switch has been documented, and the documentation of C<PERLIO_DEBUG> has been updated. =back =head1 Testing =over 4 =item * A new test script, F<t/run/switchDx.t>, has been added to test that the new B<-Di> switch is working correctly. =back =head1 Selected Bug Fixes =over 4 =item * The change to hashbang redirection introduced in Perl 5.24.0, whereby perl would redirect to another interpreter (Perl 6) if it found a hashbang path which contains "perl" followed by "6", has been reverted because it broke in cases such as C<#!/opt/perl64/bin/perl>. =back =head1 Acknowledgements Perl 5.24.1 represents approximately 8 months of development since Perl 5.24.0 and contains approximately 8,100 lines of changes across 240 files from 18 authors. Excluding auto-generated files, documentation and release tools, there were approximately 2,200 lines of changes to 170 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.24.1: Aaron Crane, Alex Vandiver, Aristotle Pagaltzis, Chad Granum, Chris 'BinGOs' Williams, Craig A. Berry, Father Chrysostomos, James E Keenan, Jarkko Hietaniemi, Karen Etheridge, Leon Timmermans, Matthew Horsfall, Ricardo Signes, Sawyer X, Sébastien Aperghis-Tramoni, Stevan Little, Steve Hay, Tony Cook. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the Perl bug database at L<https://rt.perl.org/> . There may also be information at L<http://www.perl.org/> , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications which make it inappropriate to send to a publicly archived mailing list, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl5160delta.pod 0000644 00000405023 15125556335 0007556 0 ustar 00 =encoding utf8 =head1 NAME perl5160delta - what is new for perl v5.16.0 =head1 DESCRIPTION This document describes differences between the 5.14.0 release and the 5.16.0 release. If you are upgrading from an earlier release such as 5.12.0, first read L<perl5140delta>, which describes differences between 5.12.0 and 5.14.0. Some bug fixes in this release have been backported to later releases of 5.14.x. Those are indicated with the 5.14.x version in parentheses. =head1 Notice With the release of Perl 5.16.0, the 5.12.x series of releases is now out of its support period. There may be future 5.12.x releases, but only in the event of a critical security issue. Users of Perl 5.12 or earlier should consider upgrading to a more recent release of Perl. This policy is described in greater detail in L<perlpolicy|perlpolicy/MAINTENANCE AND SUPPORT>. =head1 Core Enhancements =head2 C<use I<VERSION>> As of this release, version declarations like C<use v5.16> now disable all features before enabling the new feature bundle. This means that the following holds true: use 5.016; # only 5.16 features enabled here use 5.014; # only 5.14 features enabled here (not 5.16) C<use v5.12> and higher continue to enable strict, but explicit C<use strict> and C<no strict> now override the version declaration, even when they come first: no strict; use 5.012; # no strict here There is a new ":default" feature bundle that represents the set of features enabled before any version declaration or C<use feature> has been seen. Version declarations below 5.10 now enable the ":default" feature set. This does not actually change the behavior of C<use v5.8>, because features added to the ":default" set are those that were traditionally enabled by default, before they could be turned off. C<< no feature >> now resets to the default feature set. To disable all features (which is likely to be a pretty special-purpose request, since it presumably won't match any named set of semantics) you can now write C<< no feature ':all' >>. C<$[> is now disabled under C<use v5.16>. It is part of the default feature set and can be turned on or off explicitly with C<use feature 'array_base'>. =head2 C<__SUB__> The new C<__SUB__> token, available under the C<current_sub> feature (see L<feature>) or C<use v5.16>, returns a reference to the current subroutine, making it easier to write recursive closures. =head2 New and Improved Built-ins =head3 More consistent C<eval> The C<eval> operator sometimes treats a string argument as a sequence of characters and sometimes as a sequence of bytes, depending on the internal encoding. The internal encoding is not supposed to make any difference, but there is code that relies on this inconsistency. The new C<unicode_eval> and C<evalbytes> features (enabled under C<use 5.16.0>) resolve this. The C<unicode_eval> feature causes C<eval $string> to treat the string always as Unicode. The C<evalbytes> features provides a function, itself called C<evalbytes>, which evaluates its argument always as a string of bytes. These features also fix oddities with source filters leaking to outer dynamic scopes. See L<feature> for more detail. =head3 C<substr> lvalue revamp =for comment Does this belong here, or under Incompatible Changes? When C<substr> is called in lvalue or potential lvalue context with two or three arguments, a special lvalue scalar is returned that modifies the original string (the first argument) when assigned to. Previously, the offsets (the second and third arguments) passed to C<substr> would be converted immediately to match the string, negative offsets being translated to positive and offsets beyond the end of the string being truncated. Now, the offsets are recorded without modification in the special lvalue scalar that is returned, and the original string is not even looked at by C<substr> itself, but only when the returned lvalue is read or modified. These changes result in an incompatible change: If the original string changes length after the call to C<substr> but before assignment to its return value, negative offsets will remember their position from the end of the string, affecting code like this: my $string = "string"; my $lvalue = \substr $string, -4, 2; print $$lvalue, "\n"; # prints "ri" $string = "bailing twine"; print $$lvalue, "\n"; # prints "wi"; used to print "il" The same thing happens with an omitted third argument. The returned lvalue will always extend to the end of the string, even if the string becomes longer. Since this change also allowed many bugs to be fixed (see L</The C<substr> operator>), and since the behavior of negative offsets has never been specified, the change was deemed acceptable. =head3 Return value of C<tied> The value returned by C<tied> on a tied variable is now the actual scalar that holds the object to which the variable is tied. This lets ties be weakened with C<Scalar::Util::weaken(tied $tied_variable)>. =head2 Unicode Support =head3 Supports (I<almost>) Unicode 6.1 Besides the addition of whole new scripts, and new characters in existing scripts, this new version of Unicode, as always, makes some changes to existing characters. One change that may trip up some applications is that the General Category of two characters in the Latin-1 range, PILCROW SIGN and SECTION SIGN, has been changed from Other_Symbol to Other_Punctuation. The same change has been made for a character in each of Tibetan, Ethiopic, and Aegean. The code points U+3248..U+324F (CIRCLED NUMBER TEN ON BLACK SQUARE through CIRCLED NUMBER EIGHTY ON BLACK SQUARE) have had their General Category changed from Other_Symbol to Other_Numeric. The Line Break property has changes for Hebrew and Japanese; and because of other changes in 6.1, the Perl regular expression construct C<\X> now works differently for some characters in Thai and Lao. New aliases (synonyms) have been defined for many property values; these, along with the previously existing ones, are all cross-indexed in L<perluniprops>. The return value of C<charnames::viacode()> is affected by other changes: Code point Old Name New Name U+000A LINE FEED (LF) LINE FEED U+000C FORM FEED (FF) FORM FEED U+000D CARRIAGE RETURN (CR) CARRIAGE RETURN U+0085 NEXT LINE (NEL) NEXT LINE U+008E SINGLE-SHIFT 2 SINGLE-SHIFT-2 U+008F SINGLE-SHIFT 3 SINGLE-SHIFT-3 U+0091 PRIVATE USE 1 PRIVATE USE-1 U+0092 PRIVATE USE 2 PRIVATE USE-2 U+2118 SCRIPT CAPITAL P WEIERSTRASS ELLIPTIC FUNCTION Perl will accept any of these names as input, but C<charnames::viacode()> now returns the new name of each pair. The change for U+2118 is considered by Unicode to be a correction, that is the original name was a mistake (but again, it will remain forever valid to use it to refer to U+2118). But most of these changes are the fallout of the mistake Unicode 6.0 made in naming a character used in Japanese cell phones to be "BELL", which conflicts with the longstanding industry use of (and Unicode's recommendation to use) that name to mean the ASCII control character at U+0007. Therefore, that name has been deprecated in Perl since v5.14, and any use of it will raise a warning message (unless turned off). The name "ALERT" is now the preferred name for this code point, with "BEL" an acceptable short form. The name for the new cell phone character, at code point U+1F514, remains undefined in this version of Perl (hence we don't implement quite all of Unicode 6.1), but starting in v5.18, BELL will mean this character, and not U+0007. Unicode has taken steps to make sure that this sort of mistake does not happen again. The Standard now includes all generally accepted names and abbreviations for control characters, whereas previously it didn't (though there were recommended names for most of them, which Perl used). This means that most of those recommended names are now officially in the Standard. Unicode did not recommend names for the four code points listed above between U+008E and U+008F, and in standardizing them Unicode subtly changed the names that Perl had previously given them, by replacing the final blank in each name by a hyphen. Unicode also officially accepts names that Perl had deprecated, such as FILE SEPARATOR. Now the only deprecated name is BELL. Finally, Perl now uses the new official names instead of the old (now considered obsolete) names for the first four code points in the list above (the ones which have the parentheses in them). Now that the names have been placed in the Unicode standard, these kinds of changes should not happen again, though corrections, such as to U+2118, are still possible. Unicode also added some name abbreviations, which Perl now accepts: SP for SPACE; TAB for CHARACTER TABULATION; NEW LINE, END OF LINE, NL, and EOL for LINE FEED; LOCKING-SHIFT ONE for SHIFT OUT; LOCKING-SHIFT ZERO for SHIFT IN; and ZWNBSP for ZERO WIDTH NO-BREAK SPACE. More details on this version of Unicode are provided in L<http://www.unicode.org/versions/Unicode6.1.0/>. =head3 C<use charnames> is no longer needed for C<\N{I<name>}> When C<\N{I<name>}> is encountered, the C<charnames> module is now automatically loaded when needed as if the C<:full> and C<:short> options had been specified. See L<charnames> for more information. =head3 C<\N{...}> can now have Unicode loose name matching This is described in the C<charnames> item in L</Updated Modules and Pragmata> below. =head3 Unicode Symbol Names Perl now has proper support for Unicode in symbol names. It used to be that C<*{$foo}> would ignore the internal UTF8 flag and use the bytes of the underlying representation to look up the symbol. That meant that C<*{"\x{100}"}> and C<*{"\xc4\x80"}> would return the same thing. All these parts of Perl have been fixed to account for Unicode: =over =item * Method names (including those passed to C<use overload>) =item * Typeglob names (including names of variables, subroutines, and filehandles) =item * Package names =item * C<goto> =item * Symbolic dereferencing =item * Second argument to C<bless()> and C<tie()> =item * Return value of C<ref()> =item * Subroutine prototypes =item * Attributes =item * Various warnings and error messages that mention variable names or values, methods, etc. =back In addition, a parsing bug has been fixed that prevented C<*{é}> from implicitly quoting the name, but instead interpreted it as C<*{+é}>, which would cause a strict violation. C<*{"*a::b"}> automatically strips off the * if it is followed by an ASCII letter. That has been extended to all Unicode identifier characters. One-character non-ASCII non-punctuation variables (like C<$é>) are now subject to "Used only once" warnings. They used to be exempt, as they were treated as punctuation variables. Also, single-character Unicode punctuation variables (like C<$‰>) are now supported [perl #69032]. =head3 Improved ability to mix locales and Unicode, including UTF-8 locales An optional parameter has been added to C<use locale> use locale ':not_characters'; which tells Perl to use all but the C<LC_CTYPE> and C<LC_COLLATE> portions of the current locale. Instead, the character set is assumed to be Unicode. This lets locales and Unicode be seamlessly mixed, including the increasingly frequent UTF-8 locales. When using this hybrid form of locales, the C<:locale> layer to the L<open> pragma can be used to interface with the file system, and there are CPAN modules available for ARGV and environment variable conversions. Full details are in L<perllocale>. =head3 New function C<fc> and corresponding escape sequence C<\F> for Unicode foldcase Unicode foldcase is an extension to lowercase that gives better results when comparing two strings case-insensitively. It has long been used internally in regular expression C</i> matching. Now it is available explicitly through the new C<fc> function call (enabled by S<C<"use feature 'fc'">>, or C<use v5.16>, or explicitly callable via C<CORE::fc>) or through the new C<\F> sequence in double-quotish strings. Full details are in L<perlfunc/fc>. =head3 The Unicode C<Script_Extensions> property is now supported. New in Unicode 6.0, this is an improved C<Script> property. Details are in L<perlunicode/Scripts>. =head2 XS Changes =head3 Improved typemaps for Some Builtin Types Most XS authors will know there is a longstanding bug in the OUTPUT typemap for T_AVREF (C<AV*>), T_HVREF (C<HV*>), T_CVREF (C<CV*>), and T_SVREF (C<SVREF> or C<\$foo>) that requires manually decrementing the reference count of the return value instead of the typemap taking care of this. For backwards-compatibility, this cannot be changed in the default typemaps. But we now provide additional typemaps C<T_AVREF_REFCOUNT_FIXED>, etc. that do not exhibit this bug. Using them in your extension is as simple as having one line in your C<TYPEMAP> section: HV* T_HVREF_REFCOUNT_FIXED =head3 C<is_utf8_char()> The XS-callable function C<is_utf8_char()>, when presented with malformed UTF-8 input, can read up to 12 bytes beyond the end of the string. This cannot be fixed without changing its API, and so its use is now deprecated. Use C<is_utf8_char_buf()> (described just below) instead. =head3 Added C<is_utf8_char_buf()> This function is designed to replace the deprecated L</is_utf8_char()> function. It includes an extra parameter to make sure it doesn't read past the end of the input buffer. =head3 Other C<is_utf8_foo()> functions, as well as C<utf8_to_foo()>, etc. Most other XS-callable functions that take UTF-8 encoded input implicitly assume that the UTF-8 is valid (not malformed) with respect to buffer length. Do not do things such as change a character's case or see if it is alphanumeric without first being sure that it is valid UTF-8. This can be safely done for a whole string by using one of the functions C<is_utf8_string()>, C<is_utf8_string_loc()>, and C<is_utf8_string_loclen()>. =head3 New Pad API Many new functions have been added to the API for manipulating lexical pads. See L<perlapi/Pad Data Structures> for more information. =head2 Changes to Special Variables =head3 C<$$> can be assigned to C<$$> was made read-only in Perl 5.8.0. But only sometimes: C<local $$> would make it writable again. Some CPAN modules were using C<local $$> or XS code to bypass the read-only check, so there is no reason to keep C<$$> read-only. (This change also allowed a bug to be fixed while maintaining backward compatibility.) =head3 C<$^X> converted to an absolute path on FreeBSD, OS X and Solaris C<$^X> is now converted to an absolute path on OS X, FreeBSD (without needing F</proc> mounted) and Solaris 10 and 11. This augments the previous approach of using F</proc> on Linux, FreeBSD, and NetBSD (in all cases, where mounted). This makes relocatable perl installations more useful on these platforms. (See "Relocatable @INC" in F<INSTALL>) =head2 Debugger Changes =head3 Features inside the debugger The current Perl's L<feature> bundle is now enabled for commands entered in the interactive debugger. =head3 New option for the debugger's B<t> command The B<t> command in the debugger, which toggles tracing mode, now accepts a numeric argument that determines how many levels of subroutine calls to trace. =head3 C<enable> and C<disable> The debugger now has C<disable> and C<enable> commands for disabling existing breakpoints and re-enabling them. See L<perldebug>. =head3 Breakpoints with file names The debugger's "b" command for setting breakpoints now lets a line number be prefixed with a file name. See L<perldebug/"b [file]:[line] [condition]">. =head2 The C<CORE> Namespace =head3 The C<CORE::> prefix The C<CORE::> prefix can now be used on keywords enabled by L<feature.pm|feature>, even outside the scope of C<use feature>. =head3 Subroutines in the C<CORE> namespace Many Perl keywords are now available as subroutines in the CORE namespace. This lets them be aliased: BEGIN { *entangle = \&CORE::tie } entangle $variable, $package, @args; And for prototypes to be bypassed: sub mytie(\[%$*@]$@) { my ($ref, $pack, @args) = @_; ... do something ... goto &CORE::tie; } Some of these cannot be called through references or via C<&foo> syntax, but must be called as barewords. See L<CORE> for details. =head2 Other Changes =head3 Anonymous handles Automatically generated file handles are now named __ANONIO__ when the variable name cannot be determined, rather than $__ANONIO__. =head3 Autoloaded sort Subroutines Custom sort subroutines can now be autoloaded [perl #30661]: sub AUTOLOAD { ... } @sorted = sort foo @list; # uses AUTOLOAD =head3 C<continue> no longer requires the "switch" feature The C<continue> keyword has two meanings. It can introduce a C<continue> block after a loop, or it can exit the current C<when> block. Up to now, the latter meaning was valid only with the "switch" feature enabled, and was a syntax error otherwise. Since the main purpose of feature.pm is to avoid conflicts with user-defined subroutines, there is no reason for C<continue> to depend on it. =head3 DTrace probes for interpreter phase change The C<phase-change> probes will fire when the interpreter's phase changes, which tracks the C<${^GLOBAL_PHASE}> variable. C<arg0> is the new phase name; C<arg1> is the old one. This is useful for limiting your instrumentation to one or more of: compile time, run time, or destruct time. =head3 C<__FILE__()> Syntax The C<__FILE__>, C<__LINE__> and C<__PACKAGE__> tokens can now be written with an empty pair of parentheses after them. This makes them parse the same way as C<time>, C<fork> and other built-in functions. =head3 The C<\$> prototype accepts any scalar lvalue The C<\$> and C<\[$]> subroutine prototypes now accept any scalar lvalue argument. Previously they accepted only scalars beginning with C<$> and hash and array elements. This change makes them consistent with the way the built-in C<read> and C<recv> functions (among others) parse their arguments. This means that one can override the built-in functions with custom subroutines that parse their arguments the same way. =head3 C<_> in subroutine prototypes The C<_> character in subroutine prototypes is now allowed before C<@> or C<%>. =head1 Security =head2 Use C<is_utf8_char_buf()> and not C<is_utf8_char()> The latter function is now deprecated because its API is insufficient to guarantee that it doesn't read (up to 12 bytes in the worst case) beyond the end of its input string. See L<is_utf8_char_buf()|/Added is_utf8_char_buf()>. =head2 Malformed UTF-8 input could cause attempts to read beyond the end of the buffer Two new XS-accessible functions, C<utf8_to_uvchr_buf()> and C<utf8_to_uvuni_buf()> are now available to prevent this, and the Perl core has been converted to use them. See L</Internal Changes>. =head2 C<File::Glob::bsd_glob()> memory error with GLOB_ALTDIRFUNC (CVE-2011-2728). Calling C<File::Glob::bsd_glob> with the unsupported flag GLOB_ALTDIRFUNC would cause an access violation / segfault. A Perl program that accepts a flags value from an external source could expose itself to denial of service or arbitrary code execution attacks. There are no known exploits in the wild. The problem has been corrected by explicitly disabling all unsupported flags and setting unused function pointers to null. Bug reported by Clément Lecigne. (5.14.2) =head2 Privileges are now set correctly when assigning to C<$(> A hypothetical bug (probably unexploitable in practice) because the incorrect setting of the effective group ID while setting C<$(> has been fixed. The bug would have affected only systems that have C<setresgid()> but not C<setregid()>, but no such systems are known to exist. =head1 Deprecations =head2 Don't read the Unicode data base files in F<lib/unicore> It is now deprecated to directly read the Unicode data base files. These are stored in the F<lib/unicore> directory. Instead, you should use the new functions in L<Unicode::UCD>. These provide a stable API, and give complete information. Perl may at some point in the future change or remove these files. The file which applications were most likely to have used is F<lib/unicore/ToDigit.pl>. L<Unicode::UCD/prop_invmap()> can be used to get at its data instead. =head2 XS functions C<is_utf8_char()>, C<utf8_to_uvchr()> and C<utf8_to_uvuni()> This function is deprecated because it could read beyond the end of the input string. Use the new L<is_utf8_char_buf()|/Added is_utf8_char_buf()>, C<utf8_to_uvchr_buf()> and C<utf8_to_uvuni_buf()> instead. =head1 Future Deprecations This section serves as a notice of features that are I<likely> to be removed or L<deprecated|perlpolicy/deprecated> in the next release of perl (5.18.0). If your code depends on these features, you should contact the Perl 5 Porters via the L<mailing list|http://lists.perl.org/list/perl5-porters.html> or L<perlbug> to explain your use case and inform the deprecation process. =head2 Core Modules These modules may be marked as deprecated I<from the core>. This only means that they will no longer be installed by default with the core distribution, but will remain available on the CPAN. =over =item * CPANPLUS =item * Filter::Simple =item * PerlIO::mmap =item * Pod::LaTeX =item * Pod::Parser =item * SelfLoader =item * Text::Soundex =item * Thread.pm =back =head2 Platforms with no supporting programmers These platforms will probably have their special build support removed during the 5.17.0 development series. =over =item * BeOS =item * djgpp =item * dgux =item * EPOC =item * MPE/iX =item * Rhapsody =item * UTS =item * VM/ESA =back =head2 Other Future Deprecations =over =item * Swapping of $< and $> For more information about this future deprecation, see L<the relevant RT ticket|https://rt.perl.org/rt3/Ticket/Display.html?id=96212>. =item * sfio, stdio Perl supports being built without PerlIO proper, using a stdio or sfio wrapper instead. A perl build like this will not support IO layers and thus Unicode IO, making it rather handicapped. PerlIO supports a C<stdio> layer if stdio use is desired, and similarly a sfio layer could be produced. =item * Unescaped literal C<< "{" >> in regular expressions. Starting with v5.20, it is planned to require a literal C<"{"> to be escaped, for example by preceding it with a backslash. In v5.18, a deprecated warning message will be emitted for all such uses. This affects only patterns that are to match a literal C<"{">. Other uses of this character, such as part of a quantifier or sequence as in those below, are completely unaffected: /foo{3,5}/ /\p{Alphabetic}/ /\N{DIGIT ZERO} Removing this will permit extensions to Perl's pattern syntax and better error checking for existing syntax. See L<perlre/Quantifiers> for an example. =item * Revamping C<< "\Q" >> semantics in double-quotish strings when combined with other escapes. There are several bugs and inconsistencies involving combinations of C<\Q> and escapes like C<\x>, C<\L>, etc., within a C<\Q...\E> pair. These need to be fixed, and doing so will necessarily change current behavior. The changes have not yet been settled. =back =head1 Incompatible Changes =head2 Special blocks called in void context Special blocks (C<BEGIN>, C<CHECK>, C<INIT>, C<UNITCHECK>, C<END>) are now called in void context. This avoids wasteful copying of the result of the last statement [perl #108794]. =head2 The C<overloading> pragma and regexp objects With C<no overloading>, regular expression objects returned by C<qr//> are now stringified as "Regexp=REGEXP(0xbe600d)" instead of the regular expression itself [perl #108780]. =head2 Two XS typemap Entries removed Two presumably unused XS typemap entries have been removed from the core typemap: T_DATAUNIT and T_CALLBACK. If you are, against all odds, a user of these, please see the instructions on how to restore them in L<perlxstypemap>. =head2 Unicode 6.1 has incompatibilities with Unicode 6.0 These are detailed in L</Supports (almost) Unicode 6.1> above. You can compile this version of Perl to use Unicode 6.0. See L<perlunicode/Hacking Perl to work on earlier Unicode versions (for very serious hackers only)>. =head2 Borland compiler All support for the Borland compiler has been dropped. The code had not worked for a long time anyway. =head2 Certain deprecated Unicode properties are no longer supported by default Perl should never have exposed certain Unicode properties that are used by Unicode internally and not meant to be publicly available. Use of these has generated deprecated warning messages since Perl 5.12. The removed properties are Other_Alphabetic, Other_Default_Ignorable_Code_Point, Other_Grapheme_Extend, Other_ID_Continue, Other_ID_Start, Other_Lowercase, Other_Math, and Other_Uppercase. Perl may be recompiled to include any or all of them; instructions are given in L<perluniprops/Unicode character properties that are NOT accepted by Perl>. =head2 Dereferencing IO thingies as typeglobs The C<*{...}> operator, when passed a reference to an IO thingy (as in C<*{*STDIN{IO}}>), creates a new typeglob containing just that IO object. Previously, it would stringify as an empty string, but some operators would treat it as undefined, producing an "uninitialized" warning. Now it stringifies as __ANONIO__ [perl #96326]. =head2 User-defined case-changing operations This feature was deprecated in Perl 5.14, and has now been removed. The CPAN module L<Unicode::Casing> provides better functionality without the drawbacks that this feature had, as are detailed in the 5.14 documentation: L<http://perldoc.perl.org/5.14.0/perlunicode.html#User-Defined-Case-Mappings-%28for-serious-hackers-only%29> =head2 XSUBs are now 'static' XSUB C functions are now 'static', that is, they are not visible from outside the compilation unit. Users can use the new C<XS_EXTERNAL(name)> and C<XS_INTERNAL(name)> macros to pick the desired linking behavior. The ordinary C<XS(name)> declaration for XSUBs will continue to declare non-'static' XSUBs for compatibility, but the XS compiler, L<ExtUtils::ParseXS> (C<xsubpp>) will emit 'static' XSUBs by default. L<ExtUtils::ParseXS>'s behavior can be reconfigured from XS using the C<EXPORT_XSUB_SYMBOLS> keyword. See L<perlxs> for details. =head2 Weakening read-only references Weakening read-only references is no longer permitted. It should never have worked anyway, and could sometimes result in crashes. =head2 Tying scalars that hold typeglobs Attempting to tie a scalar after a typeglob was assigned to it would instead tie the handle in the typeglob's IO slot. This meant that it was impossible to tie the scalar itself. Similar problems affected C<tied> and C<untie>: C<tied $scalar> would return false on a tied scalar if the last thing returned was a typeglob, and C<untie $scalar> on such a tied scalar would do nothing. We fixed this problem before Perl 5.14.0, but it caused problems with some CPAN modules, so we put in a deprecation cycle instead. Now the deprecation has been removed and this bug has been fixed. So C<tie $scalar> will always tie the scalar, not the handle it holds. To tie the handle, use C<tie *$scalar> (with an explicit asterisk). The same applies to C<tied *$scalar> and C<untie *$scalar>. =head2 IPC::Open3 no longer provides C<xfork()>, C<xclose_on_exec()> and C<xpipe_anon()> All three functions were private, undocumented, and unexported. They do not appear to be used by any code on CPAN. Two have been inlined and one deleted entirely. =head2 C<$$> no longer caches PID Previously, if one called fork(3) from C, Perl's notion of C<$$> could go out of sync with what getpid() returns. By always fetching the value of C<$$> via getpid(), this potential bug is eliminated. Code that depends on the caching behavior will break. As described in L<Core Enhancements|/C<$$> can be assigned to>, C<$$> is now writable, but it will be reset during a fork. =head2 C<$$> and C<getppid()> no longer emulate POSIX semantics under LinuxThreads The POSIX emulation of C<$$> and C<getppid()> under the obsolete LinuxThreads implementation has been removed. This only impacts users of Linux 2.4 and users of Debian GNU/kFreeBSD up to and including 6.0, not the vast majority of Linux installations that use NPTL threads. This means that C<getppid()>, like C<$$>, is now always guaranteed to return the OS's idea of the current state of the process, not perl's cached version of it. See the documentation for L<$$|perlvar/$$> for details. =head2 C<< $< >>, C<< $> >>, C<$(> and C<$)> are no longer cached Similarly to the changes to C<$$> and C<getppid()>, the internal caching of C<< $< >>, C<< $> >>, C<$(> and C<$)> has been removed. When we cached these values our idea of what they were would drift out of sync with reality if someone (e.g., someone embedding perl) called C<sete?[ug]id()> without updating C<PL_e?[ug]id>. Having to deal with this complexity wasn't worth it given how cheap the C<gete?[ug]id()> system call is. This change will break a handful of CPAN modules that use the XS-level C<PL_uid>, C<PL_gid>, C<PL_euid> or C<PL_egid> variables. The fix for those breakages is to use C<PerlProc_gete?[ug]id()> to retrieve them (e.g., C<PerlProc_getuid()>), and not to assign to C<PL_e?[ug]id> if you change the UID/GID/EUID/EGID. There is no longer any need to do so since perl will always retrieve the up-to-date version of those values from the OS. =head2 Which Non-ASCII characters get quoted by C<quotemeta> and C<\Q> has changed This is unlikely to result in a real problem, as Perl does not attach special meaning to any non-ASCII character, so it is currently irrelevant which are quoted or not. This change fixes bug [perl #77654] and brings Perl's behavior more into line with Unicode's recommendations. See L<perlfunc/quotemeta>. =head1 Performance Enhancements =over =item * Improved performance for Unicode properties in regular expressions =for comment Can this be compacted some? -- rjbs, 2012-02-20 Matching a code point against a Unicode property is now done via a binary search instead of linear. This means for example that the worst case for a 1000 item property is 10 probes instead of 1000. This inefficiency has been compensated for in the past by permanently storing in a hash the results of a given probe plus the results for the adjacent 64 code points, under the theory that near-by code points are likely to be searched for. A separate hash was used for each mention of a Unicode property in each regular expression. Thus, C<qr/\p{foo}abc\p{foo}/> would generate two hashes. Any probes in one instance would be unknown to the other, and the hashes could expand separately to be quite large if the regular expression were used on many different widely-separated code points. Now, however, there is just one hash shared by all instances of a given property. This means that if C<\p{foo}> is matched against "A" in one regular expression in a thread, the result will be known immediately to all regular expressions, and the relentless march of using up memory is slowed considerably. =item * Version declarations with the C<use> keyword (e.g., C<use 5.012>) are now faster, as they enable features without loading F<feature.pm>. =item * C<local $_> is faster now, as it no longer iterates through magic that it is not going to copy anyway. =item * Perl 5.12.0 sped up the destruction of objects whose classes define empty C<DESTROY> methods (to prevent autoloading), by simply not calling such empty methods. This release takes this optimization a step further, by not calling any C<DESTROY> method that begins with a C<return> statement. This can be useful for destructors that are only used for debugging: use constant DEBUG => 1; sub DESTROY { return unless DEBUG; ... } Constant-folding will reduce the first statement to C<return;> if DEBUG is set to 0, triggering this optimization. =item * Assigning to a variable that holds a typeglob or copy-on-write scalar is now much faster. Previously the typeglob would be stringified or the copy-on-write scalar would be copied before being clobbered. =item * Assignment to C<substr> in void context is now more than twice its previous speed. Instead of creating and returning a special lvalue scalar that is then assigned to, C<substr> modifies the original string itself. =item * C<substr> no longer calculates a value to return when called in void context. =item * Due to changes in L<File::Glob>, Perl's C<glob> function and its C<< <...> >> equivalent are now much faster. The splitting of the pattern into words has been rewritten in C, resulting in speed-ups of 20% for some cases. This does not affect C<glob> on VMS, as it does not use File::Glob. =item * The short-circuiting operators C<&&>, C<||>, and C<//>, when chained (such as C<$a || $b || $c>), are now considerably faster to short-circuit, due to reduced optree traversal. =item * The implementation of C<s///r> makes one fewer copy of the scalar's value. =item * Recursive calls to lvalue subroutines in lvalue scalar context use less memory. =back =head1 Modules and Pragmata =head2 Deprecated Modules =over =item L<Version::Requirements> Version::Requirements is now DEPRECATED, use L<CPAN::Meta::Requirements>, which is a drop-in replacement. It will be deleted from perl.git blead in v5.17.0. =back =head2 New Modules and Pragmata =over 4 =item * L<arybase> -- this new module implements the C<$[> variable. =item * L<PerlIO::mmap> 0.010 has been added to the Perl core. The C<mmap> PerlIO layer is no longer implemented by perl itself, but has been moved out into the new L<PerlIO::mmap> module. =back =head2 Updated Modules and Pragmata This is only an overview of selected module updates. For a complete list of updates, run: $ corelist --diff 5.14.0 5.16.0 You can substitute your favorite version in place of 5.14.0, too. =over 4 =item * L<Archive::Extract> has been upgraded from version 0.48 to 0.58. Includes a fix for FreeBSD to only use C<unzip> if it is located in C</usr/local/bin>, as FreeBSD 9.0 will ship with a limited C<unzip> in C</usr/bin>. =item * L<Archive::Tar> has been upgraded from version 1.76 to 1.82. Adjustments to handle files >8gb (>0777777777777 octal) and a feature to return the MD5SUM of files in the archive. =item * L<base> has been upgraded from version 2.16 to 2.18. C<base> no longer sets a module's C<$VERSION> to "-1" when a module it loads does not define a C<$VERSION>. This change has been made because "-1" is not a valid version number under the new "lax" criteria used internally by C<UNIVERSAL::VERSION>. (See L<version> for more on "lax" version criteria.) C<base> no longer internally skips loading modules it has already loaded and instead relies on C<require> to inspect C<%INC>. This fixes a bug when C<base> is used with code that clear C<%INC> to force a module to be reloaded. =item * L<Carp> has been upgraded from version 1.20 to 1.26. It now includes last read filehandle info and puts a dot after the file and line number, just like errors from C<die> [perl #106538]. =item * L<charnames> has been updated from version 1.18 to 1.30. C<charnames> can now be invoked with a new option, C<:loose>, which is like the existing C<:full> option, but enables Unicode loose name matching. Details are in L<charnames/LOOSE MATCHES>. =item * L<B::Deparse> has been upgraded from version 1.03 to 1.14. This fixes numerous deparsing bugs. =item * L<CGI> has been upgraded from version 3.52 to 3.59. It uses the public and documented FCGI.pm API in CGI::Fast. CGI::Fast was using an FCGI API that was deprecated and removed from documentation more than ten years ago. Usage of this deprecated API with FCGI E<gt>= 0.70 or FCGI E<lt>= 0.73 introduces a security issue. L<https://rt.cpan.org/Public/Bug/Display.html?id=68380> L<http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2011-2766> Things that may break your code: C<url()> was fixed to return C<PATH_INFO> when it is explicitly requested with either the C<path=E<gt>1> or C<path_info=E<gt>1> flag. If your code is running under mod_rewrite (or compatible) and you are calling C<self_url()> or you are calling C<url()> and passing C<path_info=E<gt>1>, these methods will actually be returning C<PATH_INFO> now, as you have explicitly requested or C<self_url()> has requested on your behalf. The C<PATH_INFO> has been omitted in such URLs since the issue was introduced in the 3.12 release in December, 2005. This bug is so old your application may have come to depend on it or workaround it. Check for application before upgrading to this release. Examples of affected method calls: $q->url(-absolute => 1, -query => 1, -path_info => 1); $q->url(-path=>1); $q->url(-full=>1,-path=>1); $q->url(-rewrite=>1,-path=>1); $q->self_url(); We no longer read from STDIN when the Content-Length is not set, preventing requests with no Content-Length from sometimes freezing. This is consistent with the CGI RFC 3875, and is also consistent with CGI::Simple. However, the old behavior may have been expected by some command-line uses of CGI.pm. In addition, the DELETE HTTP verb is now supported. =item * L<Compress::Zlib> has been upgraded from version 2.035 to 2.048. IO::Compress::Zip and IO::Uncompress::Unzip now have support for LZMA (method 14). There is a fix for a CRC issue in IO::Compress::Unzip and it supports Streamed Stored context now. And fixed a Zip64 issue in IO::Compress::Zip when the content size was exactly 0xFFFFFFFF. =item * L<Digest::SHA> has been upgraded from version 5.61 to 5.71. Added BITS mode to the addfile method and shasum. This makes partial-byte inputs possible via files/STDIN and lets shasum check all 8074 NIST Msg vectors, where previously special programming was required to do this. =item * L<Encode> has been upgraded from version 2.42 to 2.44. Missing aliases added, a deep recursion error fixed and various documentation updates. Addressed 'decode_xs n-byte heap-overflow' security bug in Unicode.xs (CVE-2011-2939). (5.14.2) =item * L<ExtUtils::CBuilder> updated from version 0.280203 to 0.280206. The new version appends CFLAGS and LDFLAGS to their Config.pm counterparts. =item * L<ExtUtils::ParseXS> has been upgraded from version 2.2210 to 3.16. Much of L<ExtUtils::ParseXS>, the module behind the XS compiler C<xsubpp>, was rewritten and cleaned up. It has been made somewhat more extensible and now finally uses strictures. The typemap logic has been moved into a separate module, L<ExtUtils::Typemaps>. See L</New Modules and Pragmata>, above. For a complete set of changes, please see the ExtUtils::ParseXS changelog, available on the CPAN. =item * L<File::Glob> has been upgraded from version 1.12 to 1.17. On Windows, tilde (~) expansion now checks the C<USERPROFILE> environment variable, after checking C<HOME>. It has a new C<:bsd_glob> export tag, intended to replace C<:glob>. Like C<:glob> it overrides C<glob> with a function that does not split the glob pattern into words, but, unlike C<:glob>, it iterates properly in scalar context, instead of returning the last file. There are other changes affecting Perl's own C<glob> operator (which uses File::Glob internally, except on VMS). See L</Performance Enhancements> and L</Selected Bug Fixes>. =item * L<FindBin> updated from version 1.50 to 1.51. It no longer returns a wrong result if a script of the same name as the current one exists in the path and is executable. =item * L<HTTP::Tiny> has been upgraded from version 0.012 to 0.017. Added support for using C<$ENV{http_proxy}> to set the default proxy host. Adds additional shorthand methods for all common HTTP verbs, a C<post_form()> method for POST-ing x-www-form-urlencoded data and a C<www_form_urlencode()> utility method. =item * L<IO> has been upgraded from version 1.25_04 to 1.25_06, and L<IO::Handle> from version 1.31 to 1.33. Together, these upgrades fix a problem with IO::Handle's C<getline> and C<getlines> methods. When these methods are called on the special ARGV handle, the next file is automatically opened, as happens with the built-in C<E<lt>E<gt>> and C<readline> functions. But, unlike the built-ins, these methods were not respecting the caller's use of the L<open> pragma and applying the appropriate I/O layers to the newly-opened file [rt.cpan.org #66474]. =item * L<IPC::Cmd> has been upgraded from version 0.70 to 0.76. Capturing of command output (both C<STDOUT> and C<STDERR>) is now supported using L<IPC::Open3> on MSWin32 without requiring L<IPC::Run>. =item * L<IPC::Open3> has been upgraded from version 1.09 to 1.12. Fixes a bug which prevented use of C<open3> on Windows when C<*STDIN>, C<*STDOUT> or C<*STDERR> had been localized. Fixes a bug which prevented duplicating numeric file descriptors on Windows. C<open3> with "-" for the program name works once more. This was broken in version 1.06 (and hence in Perl 5.14.0) [perl #95748]. =item * L<Locale::Codes> has been upgraded from version 3.16 to 3.21. Added Language Extension codes (langext) and Language Variation codes (langvar) as defined in the IANA language registry. Added language codes from ISO 639-5 Added language/script codes from the IANA language subtag registry Fixed an uninitialized value warning [rt.cpan.org #67438]. Fixed the return value for the all_XXX_codes and all_XXX_names functions [rt.cpan.org #69100]. Reorganized modules to move Locale::MODULE to Locale::Codes::MODULE to allow for cleaner future additions. The original four modules (Locale::Language, Locale::Currency, Locale::Country, Locale::Script) will continue to work, but all new sets of codes will be added in the Locale::Codes namespace. The code2XXX, XXX2code, all_XXX_codes, and all_XXX_names functions now support retired codes. All codesets may be specified by a constant or by their name now. Previously, they were specified only by a constant. The alias_code function exists for backward compatibility. It has been replaced by rename_country_code. The alias_code function will be removed some time after September, 2013. All work is now done in the central module (Locale::Codes). Previously, some was still done in the wrapper modules (Locale::Codes::*). Added Language Family codes (langfam) as defined in ISO 639-5. =item * L<Math::BigFloat> has been upgraded from version 1.993 to 1.997. The C<numify> method has been corrected to return a normalized Perl number (the result of C<0 + $thing>), instead of a string [rt.cpan.org #66732]. =item * L<Math::BigInt> has been upgraded from version 1.994 to 1.998. It provides a new C<bsgn> method that complements the C<babs> method. It fixes the internal C<objectify> function's handling of "foreign objects" so they are converted to the appropriate class (Math::BigInt or Math::BigFloat). =item * L<Math::BigRat> has been upgraded from version 0.2602 to 0.2603. C<int()> on a Math::BigRat object containing -1/2 now creates a Math::BigInt containing 0, rather than -0. L<Math::BigInt> does not even support negative zero, so the resulting object was actually malformed [perl #95530]. =item * L<Math::Complex> has been upgraded from version 1.56 to 1.59 and L<Math::Trig> from version 1.2 to 1.22. Fixes include: correct copy constructor usage; fix polarwise formatting with numeric format specifier; and more stable C<great_circle_direction> algorithm. =item * L<Module::CoreList> has been upgraded from version 2.51 to 2.66. The C<corelist> utility now understands the C<-r> option for displaying Perl release dates and the C<--diff> option to print the set of modlib changes between two perl distributions. =item * L<Module::Metadata> has been upgraded from version 1.000004 to 1.000009. Adds C<provides> method to generate a CPAN META provides data structure correctly; use of C<package_versions_from_directory> is discouraged. =item * L<ODBM_File> has been upgraded from version 1.10 to 1.12. The XS code is now compiled with C<PERL_NO_GET_CONTEXT>, which will aid performance under ithreads. =item * L<open> has been upgraded from version 1.08 to 1.10. It no longer turns off layers on standard handles when invoked without the ":std" directive. Similarly, when invoked I<with> the ":std" directive, it now clears layers on STDERR before applying the new ones, and not just on STDIN and STDOUT [perl #92728]. =item * L<overload> has been upgraded from version 1.13 to 1.18. C<overload::Overloaded> no longer calls C<can> on the class, but uses another means to determine whether the object has overloading. It was never correct for it to call C<can>, as overloading does not respect AUTOLOAD. So classes that autoload methods and implement C<can> no longer have to account for overloading [perl #40333]. A warning is now produced for invalid arguments. See L</New Diagnostics>. =item * L<PerlIO::scalar> has been upgraded from version 0.11 to 0.14. (This is the module that implements C<< open $fh, '>', \$scalar >>.) It fixes a problem with C<< open my $fh, ">", \$scalar >> not working if C<$scalar> is a copy-on-write scalar. (5.14.2) It also fixes a hang that occurs with C<readline> or C<< <$fh> >> if a typeglob has been assigned to $scalar [perl #92258]. It no longer assumes during C<seek> that $scalar is a string internally. If it didn't crash, it was close to doing so [perl #92706]. Also, the internal print routine no longer assumes that the position set by C<seek> is valid, but extends the string to that position, filling the intervening bytes (between the old length and the seek position) with nulls [perl #78980]. Printing to an in-memory handle now works if the $scalar holds a reference, stringifying the reference before modifying it. References used to be treated as empty strings. Printing to an in-memory handle no longer crashes if the $scalar happens to hold a number internally, but no string buffer. Printing to an in-memory handle no longer creates scalars that confuse the regular expression engine [perl #108398]. =item * L<Pod::Functions> has been upgraded from version 1.04 to 1.05. F<Functions.pm> is now generated at perl build time from annotations in F<perlfunc.pod>. This will ensure that L<Pod::Functions> and L<perlfunc> remain in synchronisation. =item * L<Pod::Html> has been upgraded from version 1.11 to 1.1502. This is an extensive rewrite of Pod::Html to use L<Pod::Simple> under the hood. The output has changed significantly. =item * L<Pod::Perldoc> has been upgraded from version 3.15_03 to 3.17. It corrects the search paths on VMS [perl #90640]. (5.14.1) The B<-v> option now fetches the right section for C<$0>. This upgrade has numerous significant fixes. Consult its changelog on the CPAN for more information. =item * L<POSIX> has been upgraded from version 1.24 to 1.30. L<POSIX> no longer uses L<AutoLoader>. Any code which was relying on this implementation detail was buggy, and may fail because of this change. The module's Perl code has been considerably simplified, roughly halving the number of lines, with no change in functionality. The XS code has been refactored to reduce the size of the shared object by about 12%, with no change in functionality. More POSIX functions now have tests. C<sigsuspend> and C<pause> now run signal handlers before returning, as the whole point of these two functions is to wait until a signal has arrived, and then return I<after> it has been triggered. Delayed, or "safe", signals were preventing that from happening, possibly resulting in race conditions [perl #107216]. C<POSIX::sleep> is now a direct call into the underlying OS C<sleep> function, instead of being a Perl wrapper on C<CORE::sleep>. C<POSIX::dup2> now returns the correct value on Win32 (I<i.e.>, the file descriptor). C<POSIX::SigSet> C<sigsuspend> and C<sigpending> and C<POSIX::pause> now dispatch safe signals immediately before returning to their caller. C<POSIX::Termios::setattr> now defaults the third argument to C<TCSANOW>, instead of 0. On most platforms C<TCSANOW> is defined to be 0, but on some 0 is not a valid parameter, which caused a call with defaults to fail. =item * L<Socket> has been upgraded from version 1.94 to 2.001. It has new functions and constants for handling IPv6 sockets: pack_ipv6_mreq unpack_ipv6_mreq IPV6_ADD_MEMBERSHIP IPV6_DROP_MEMBERSHIP IPV6_MTU IPV6_MTU_DISCOVER IPV6_MULTICAST_HOPS IPV6_MULTICAST_IF IPV6_MULTICAST_LOOP IPV6_UNICAST_HOPS IPV6_V6ONLY =item * L<Storable> has been upgraded from version 2.27 to 2.34. It no longer turns copy-on-write scalars into read-only scalars when freezing and thawing. =item * L<Sys::Syslog> has been upgraded from version 0.27 to 0.29. This upgrade closes many outstanding bugs. =item * L<Term::ANSIColor> has been upgraded from version 3.00 to 3.01. Only interpret an initial array reference as a list of colors, not any initial reference, allowing the colored function to work properly on objects with stringification defined. =item * L<Term::ReadLine> has been upgraded from version 1.07 to 1.09. Term::ReadLine now supports any event loop, including unpublished ones and simple L<IO::Select>, loops without the need to rewrite existing code for any particular framework [perl #108470]. =item * L<threads::shared> has been upgraded from version 1.37 to 1.40. Destructors on shared objects used to be ignored sometimes if the objects were referenced only by shared data structures. This has been mostly fixed, but destructors may still be ignored if the objects still exist at global destruction time [perl #98204]. =item * L<Unicode::Collate> has been upgraded from version 0.73 to 0.89. Updated to CLDR 1.9.1 Locales updated to CLDR 2.0: mk, mt, nb, nn, ro, ru, sk, sr, sv, uk, zh__pinyin, zh__stroke Newly supported locales: bn, fa, ml, mr, or, pa, sa, si, si__dictionary, sr_Latn, sv__reformed, ta, te, th, ur, wae. Tailored compatibility ideographs as well as unified ideographs for the locales: ja, ko, zh__big5han, zh__gb2312han, zh__pinyin, zh__stroke. Locale/*.pl files are now searched for in @INC. =item * L<Unicode::Normalize> has been upgraded from version 1.10 to 1.14. Fixes for the removal of F<unicore/CompositionExclusions.txt> from core. =item * L<Unicode::UCD> has been upgraded from version 0.32 to 0.43. This adds four new functions: C<prop_aliases()> and C<prop_value_aliases()>, which are used to find all Unicode-approved synonyms for property names, or to convert from one name to another; C<prop_invlist> which returns all code points matching a given Unicode binary property; and C<prop_invmap> which returns the complete specification of a given Unicode property. =item * L<Win32API::File> has been upgraded from version 0.1101 to 0.1200. Added SetStdHandle and GetStdHandle functions =back =head2 Removed Modules and Pragmata As promised in Perl 5.14.0's release notes, the following modules have been removed from the core distribution, and if needed should be installed from CPAN instead. =over =item * L<Devel::DProf> has been removed from the Perl core. Prior version was 20110228.00. =item * L<Shell> has been removed from the Perl core. Prior version was 0.72_01. =item * Several old perl4-style libraries which have been deprecated with 5.14 are now removed: abbrev.pl assert.pl bigfloat.pl bigint.pl bigrat.pl cacheout.pl complete.pl ctime.pl dotsh.pl exceptions.pl fastcwd.pl flush.pl getcwd.pl getopt.pl getopts.pl hostname.pl importenv.pl lib/find{,depth}.pl look.pl newgetopt.pl open2.pl open3.pl pwd.pl shellwords.pl stat.pl tainted.pl termcap.pl timelocal.pl They can be found on CPAN as L<Perl4::CoreLibs>. =back =head1 Documentation =head2 New Documentation =head3 L<perldtrace> L<perldtrace> describes Perl's DTrace support, listing the provided probes and gives examples of their use. =head3 L<perlexperiment> This document is intended to provide a list of experimental features in Perl. It is still a work in progress. =head3 L<perlootut> This a new OO tutorial. It focuses on basic OO concepts, and then recommends that readers choose an OO framework from CPAN. =head3 L<perlxstypemap> The new manual describes the XS typemapping mechanism in unprecedented detail and combines new documentation with information extracted from L<perlxs> and the previously unofficial list of all core typemaps. =head2 Changes to Existing Documentation =head3 L<perlapi> =over 4 =item * The HV API has long accepted negative lengths to show that the key is in UTF8. This is now documented. =item * The C<boolSV()> macro is now documented. =back =head3 L<perlfunc> =over 4 =item * C<dbmopen> treats a 0 mode as a special case, that prevents a nonexistent file from being created. This has been the case since Perl 5.000, but was never documented anywhere. Now the perlfunc entry mentions it [perl #90064]. =item * As an accident of history, C<open $fh, '<:', ...> applies the default layers for the platform (C<:raw> on Unix, C<:crlf> on Windows), ignoring whatever is declared by L<open.pm|open>. This seems such a useful feature it has been documented in L<perlfunc|perlfunc/open> and L<open>. =item * The entry for C<split> has been rewritten. It is now far clearer than before. =back =head3 L<perlguts> =over 4 =item * A new section, L<Autoloading with XSUBs|perlguts/Autoloading with XSUBs>, has been added, which explains the two APIs for accessing the name of the autoloaded sub. =item * Some function descriptions in L<perlguts> were confusing, as it was not clear whether they referred to the function above or below the description. This has been clarified [perl #91790]. =back =head3 L<perlobj> =over 4 =item * This document has been rewritten from scratch, and its coverage of various OO concepts has been expanded. =back =head3 L<perlop> =over 4 =item * Documentation of the smartmatch operator has been reworked and moved from perlsyn to perlop where it belongs. It has also been corrected for the case of C<undef> on the left-hand side. The list of different smart match behaviors had an item in the wrong place. =item * Documentation of the ellipsis statement (C<...>) has been reworked and moved from perlop to perlsyn. =item * The explanation of bitwise operators has been expanded to explain how they work on Unicode strings (5.14.1). =item * More examples for C<m//g> have been added (5.14.1). =item * The C<<< <<\FOO >>> here-doc syntax has been documented (5.14.1). =back =head3 L<perlpragma> =over 4 =item * There is now a standard convention for naming keys in the C<%^H>, documented under L<Key naming|perlpragma/Key naming>. =back =head3 L<perlsec/Laundering and Detecting Tainted Data> =over 4 =item * The example function for checking for taintedness contained a subtle error. C<$@> needs to be localized to prevent its changing this global's value outside the function. The preferred method to check for this remains L<Scalar::Util/tainted>. =back =head3 L<perllol> =over =item * L<perllol> has been expanded with examples using the new C<push $scalar> syntax introduced in Perl 5.14.0 (5.14.1). =back =head3 L<perlmod> =over =item * L<perlmod> now states explicitly that some types of explicit symbol table manipulation are not supported. This codifies what was effectively already the case [perl #78074]. =back =head3 L<perlpodstyle> =over 4 =item * The tips on which formatting codes to use have been corrected and greatly expanded. =item * There are now a couple of example one-liners for previewing POD files after they have been edited. =back =head3 L<perlre> =over =item * The C<(*COMMIT)> directive is now listed in the right section (L<Verbs without an argument|perlre/Verbs without an argument>). =back =head3 L<perlrun> =over =item * L<perlrun> has undergone a significant clean-up. Most notably, the B<-0x...> form of the B<-0> flag has been clarified, and the final section on environment variables has been corrected and expanded (5.14.1). =back =head3 L<perlsub> =over =item * The ($;) prototype syntax, which has existed for rather a long time, is now documented in L<perlsub>. It lets a unary function have the same precedence as a list operator. =back =head3 L<perltie> =over =item * The required syntax for tying handles has been documented. =back =head3 L<perlvar> =over =item * The documentation for L<$!|perlvar/$!> has been corrected and clarified. It used to state that $! could be C<undef>, which is not the case. It was also unclear whether system calls set C's C<errno> or Perl's C<$!> [perl #91614]. =item * Documentation for L<$$|perlvar/$$> has been amended with additional cautions regarding changing the process ID. =back =head3 Other Changes =over 4 =item * L<perlxs> was extended with documentation on inline typemaps. =item * L<perlref> has a new L<Circular References|perlref/Circular References> section explaining how circularities may not be freed and how to solve that with weak references. =item * Parts of L<perlapi> were clarified, and Perl equivalents of some C functions have been added as an additional mode of exposition. =item * A few parts of L<perlre> and L<perlrecharclass> were clarified. =back =head2 Removed Documentation =head3 Old OO Documentation The old OO tutorials, perltoot, perltooc, and perlboot, have been removed. The perlbot (bag of object tricks) document has been removed as well. =head3 Development Deltas The perldelta files for development releases are no longer packaged with perl. These can still be found in the perl source code repository. =head1 Diagnostics The following additions or changes have been made to diagnostic output, including warnings and fatal error messages. For the complete list of diagnostic messages, see L<perldiag>. =head2 New Diagnostics =head3 New Errors =over 4 =item * L<Cannot set tied @DB::args|perldiag/"Cannot set tied @DB::args"> This error occurs when C<caller> tries to set C<@DB::args> but finds it tied. Before this error was added, it used to crash instead. =item * L<Cannot tie unreifiable array|perldiag/"Cannot tie unreifiable array"> This error is part of a safety check that the C<tie> operator does before tying a special array like C<@_>. You should never see this message. =item * L<&CORE::%s cannot be called directly|perldiag/"&CORE::%s cannot be called directly"> This occurs when a subroutine in the C<CORE::> namespace is called with C<&foo> syntax or through a reference. Some subroutines in this package cannot yet be called that way, but must be called as barewords. See L</Subroutines in the C<CORE> namespace>, above. =item * L<Source filters apply only to byte streams|perldiag/"Source filters apply only to byte streams"> This new error occurs when you try to activate a source filter (usually by loading a source filter module) within a string passed to C<eval> under the C<unicode_eval> feature. =back =head3 New Warnings =over 4 =item * L<defined(@array) is deprecated|perldiag/"defined(@array) is deprecated"> The long-deprecated C<defined(@array)> now also warns for package variables. Previously it issued a warning for lexical variables only. =item * L<length() used on %s|perldiag/length() used on %s> This new warning occurs when C<length> is used on an array or hash, instead of C<scalar(@array)> or C<scalar(keys %hash)>. =item * L<lvalue attribute %s already-defined subroutine|perldiag/"lvalue attribute %s already-defined subroutine"> L<attributes.pm|attributes> now emits this warning when the :lvalue attribute is applied to a Perl subroutine that has already been defined, as doing so can have unexpected side-effects. =item * L<overload arg '%s' is invalid|perldiag/"overload arg '%s' is invalid"> This warning, in the "overload" category, is produced when the overload pragma is given an argument it doesn't recognize, presumably a mistyped operator. =item * L<$[ used in %s (did you mean $] ?)|perldiag/"$[ used in %s (did you mean $] ?)"> This new warning exists to catch the mistaken use of C<$[> in version checks. C<$]>, not C<$[>, contains the version number. =item * L<Useless assignment to a temporary|perldiag/"Useless assignment to a temporary"> Assigning to a temporary scalar returned from an lvalue subroutine now produces this warning [perl #31946]. =item * L<Useless use of \E|perldiag/"Useless use of \E"> C<\E> does nothing unless preceded by C<\Q>, C<\L> or C<\U>. =back =head2 Removed Errors =over =item * "sort is now a reserved word" This error used to occur when C<sort> was called without arguments, followed by C<;> or C<)>. (E.g., C<sort;> would die, but C<{sort}> was OK.) This error message was added in Perl 3 to catch code like C<close(sort)> which would no longer work. More than two decades later, this message is no longer appropriate. Now C<sort> without arguments is always allowed, and returns an empty list, as it did in those cases where it was already allowed [perl #90030]. =back =head2 Changes to Existing Diagnostics =over 4 =item * The "Applying pattern match..." or similar warning produced when an array or hash is on the left-hand side of the C<=~> operator now mentions the name of the variable. =item * The "Attempt to free non-existent shared string" has had the spelling of "non-existent" corrected to "nonexistent". It was already listed with the correct spelling in L<perldiag>. =item * The error messages for using C<default> and C<when> outside a topicalizer have been standardized to match the messages for C<continue> and loop controls. They now read 'Can't "default" outside a topicalizer' and 'Can't "when" outside a topicalizer'. They both used to be 'Can't use when() outside a topicalizer' [perl #91514]. =item * The message, "Code point 0x%X is not Unicode, no properties match it; all inverse properties do" has been changed to "Code point 0x%X is not Unicode, all \p{} matches fail; all \P{} matches succeed". =item * Redefinition warnings for constant subroutines used to be mandatory, even occurring under C<no warnings>. Now they respect the L<warnings> pragma. =item * The "glob failed" warning message is now suppressible via C<no warnings> [perl #111656]. =item * The L<Invalid version format|perldiag/"Invalid version format (%s)"> error message now says "negative version number" within the parentheses, rather than "non-numeric data", for negative numbers. =item * The two warnings L<Possible attempt to put comments in qw() list|perldiag/"Possible attempt to put comments in qw() list"> and L<Possible attempt to separate words with commas|perldiag/"Possible attempt to separate words with commas"> are no longer mutually exclusive: the same C<qw> construct may produce both. =item * The uninitialized warning for C<y///r> when C<$_> is implicit and undefined now mentions the variable name, just like the non-/r variation of the operator. =item * The 'Use of "foo" without parentheses is ambiguous' warning has been extended to apply also to user-defined subroutines with a (;$) prototype, and not just to built-in functions. =item * Warnings that mention the names of lexical (C<my>) variables with Unicode characters in them now respect the presence or absence of the C<:utf8> layer on the output handle, instead of outputting UTF8 regardless. Also, the correct names are included in the strings passed to C<$SIG{__WARN__}> handlers, rather than the raw UTF8 bytes. =back =head1 Utility Changes =head3 L<h2ph> =over 4 =item * L<h2ph> used to generate code of the form unless(defined(&FOO)) { sub FOO () {42;} } But the subroutine is a compile-time declaration, and is hence unaffected by the condition. It has now been corrected to emit a string C<eval> around the subroutine [perl #99368]. =back =head3 L<splain> =over 4 =item * F<splain> no longer emits backtraces with the first line number repeated. This: Uncaught exception from user code: Cannot fwiddle the fwuddle at -e line 1. at -e line 1 main::baz() called at -e line 1 main::bar() called at -e line 1 main::foo() called at -e line 1 has become this: Uncaught exception from user code: Cannot fwiddle the fwuddle at -e line 1. main::baz() called at -e line 1 main::bar() called at -e line 1 main::foo() called at -e line 1 =item * Some error messages consist of multiple lines that are listed as separate entries in L<perldiag>. splain has been taught to find the separate entries in these cases, instead of simply failing to find the message. =back =head3 L<zipdetails> =over 4 =item * This is a new utility, included as part of an L<IO::Compress::Base> upgrade. L<zipdetails> displays information about the internal record structure of the zip file. It is not concerned with displaying any details of the compressed data stored in the zip file. =back =head1 Configuration and Compilation =over 4 =item * F<regexp.h> has been modified for compatibility with GCC's B<-Werror> option, as used by some projects that include perl's header files (5.14.1). =item * C<USE_LOCALE{,_COLLATE,_CTYPE,_NUMERIC}> have been added the output of perl -V as they have affect the behavior of the interpreter binary (albeit in only a small area). =item * The code and tests for L<IPC::Open2> have been moved from F<ext/IPC-Open2> into F<ext/IPC-Open3>, as C<IPC::Open2::open2()> is implemented as a thin wrapper around C<IPC::Open3::_open3()>, and hence is very tightly coupled to it. =item * The magic types and magic vtables are now generated from data in a new script F<regen/mg_vtable.pl>, instead of being maintained by hand. As different EBCDIC variants can't agree on the code point for '~', the character to code point conversion is done at build time by F<generate_uudmap> to a new generated header F<mg_data.h>. C<PL_vtbl_bm> and C<PL_vtbl_fm> are now defined by the pre-processor as C<PL_vtbl_regexp>, instead of being distinct C variables. C<PL_vtbl_sig> has been removed. =item * Building with C<-DPERL_GLOBAL_STRUCT> works again. This configuration is not generally used. =item * Perl configured with I<MAD> now correctly frees C<MADPROP> structures when OPs are freed. C<MADPROP>s are now allocated with C<PerlMemShared_malloc()> =item * F<makedef.pl> has been refactored. This should have no noticeable affect on any of the platforms that use it as part of their build (AIX, VMS, Win32). =item * C<useperlio> can no longer be disabled. =item * The file F<global.sym> is no longer needed, and has been removed. It contained a list of all exported functions, one of the files generated by F<regen/embed.pl> from data in F<embed.fnc> and F<regen/opcodes>. The code has been refactored so that the only user of F<global.sym>, F<makedef.pl>, now reads F<embed.fnc> and F<regen/opcodes> directly, removing the need to store the list of exported functions in an intermediate file. As F<global.sym> was never installed, this change should not be visible outside the build process. =item * F<pod/buildtoc>, used by the build process to build L<perltoc>, has been refactored and simplified. It now contains only code to build L<perltoc>; the code to regenerate Makefiles has been moved to F<Porting/pod_rules.pl>. It's a bug if this change has any material effect on the build process. =item * F<pod/roffitall> is now built by F<pod/buildtoc>, instead of being shipped with the distribution. Its list of manpages is now generated (and therefore current). See also RT #103202 for an unresolved related issue. =item * The man page for C<XS::Typemap> is no longer installed. C<XS::Typemap> is a test module which is not installed, hence installing its documentation makes no sense. =item * The -Dusesitecustomize and -Duserelocatableinc options now work together properly. =back =head1 Platform Support =head2 Platform-Specific Notes =head3 Cygwin =over 4 =item * Since version 1.7, Cygwin supports native UTF-8 paths. If Perl is built under that environment, directory and filenames will be UTF-8 encoded. =item * Cygwin does not initialize all original Win32 environment variables. See F<README.cygwin> for a discussion of the newly-added C<Cygwin::sync_winenv()> function [perl #110190] and for further links. =back =head3 HP-UX =over 4 =item * HP-UX PA-RISC/64 now supports gcc-4.x A fix to correct the socketsize now makes the test suite pass on HP-UX PA-RISC for 64bitall builds. (5.14.2) =back =head3 VMS =over 4 =item * Remove unnecessary includes, fix miscellaneous compiler warnings and close some unclosed comments on F<vms/vms.c>. =item * Remove sockadapt layer from the VMS build. =item * Explicit support for VMS versions before v7.0 and DEC C versions before v6.0 has been removed. =item * Since Perl 5.10.1, the home-grown C<stat> wrapper has been unable to distinguish between a directory name containing an underscore and an otherwise-identical filename containing a dot in the same position (e.g., t/test_pl as a directory and t/test.pl as a file). This problem has been corrected. =item * The build on VMS now permits names of the resulting symbols in C code for Perl longer than 31 characters. Symbols like C<Perl__it_was_the_best_of_times_it_was_the_worst_of_times> can now be created freely without causing the VMS linker to seize up. =back =head3 GNU/Hurd =over 4 =item * Numerous build and test failures on GNU/Hurd have been resolved with hints for building DBM modules, detection of the library search path, and enabling of large file support. =back =head3 OpenVOS =over 4 =item * Perl is now built with dynamic linking on OpenVOS, the minimum supported version of which is now Release 17.1.0. =back =head3 SunOS The CC workshop C++ compiler is now detected and used on systems that ship without cc. =head1 Internal Changes =over 4 =item * The compiled representation of formats is now stored via the C<mg_ptr> of their C<PERL_MAGIC_fm>. Previously it was stored in the string buffer, beyond C<SvLEN()>, the regular end of the string. C<SvCOMPILED()> and C<SvCOMPILED_{on,off}()> now exist solely for compatibility for XS code. The first is always 0, the other two now no-ops. (5.14.1) =item * Some global variables have been marked C<const>, members in the interpreter structure have been re-ordered, and the opcodes have been re-ordered. The op C<OP_AELEMFAST> has been split into C<OP_AELEMFAST> and C<OP_AELEMFAST_LEX>. =item * When empting a hash of its elements (e.g., via undef(%h), or %h=()), HvARRAY field is no longer temporarily zeroed. Any destructors called on the freed elements see the remaining elements. Thus, %h=() becomes more like C<delete $h{$_} for keys %h>. =item * Boyer-Moore compiled scalars are now PVMGs, and the Boyer-Moore tables are now stored via the mg_ptr of their C<PERL_MAGIC_bm>. Previously they were PVGVs, with the tables stored in the string buffer, beyond C<SvLEN()>. This eliminates the last place where the core stores data beyond C<SvLEN()>. =item * Simplified logic in C<Perl_sv_magic()> introduces a small change of behavior for error cases involving unknown magic types. Previously, if C<Perl_sv_magic()> was passed a magic type unknown to it, it would =over =item 1. Croak "Modification of a read-only value attempted" if read only =item 2. Return without error if the SV happened to already have this magic =item 3. otherwise croak "Don't know how to handle magic of type \\%o" =back Now it will always croak "Don't know how to handle magic of type \\%o", even on read-only values, or SVs which already have the unknown magic type. =item * The experimental C<fetch_cop_label> function has been renamed to C<cop_fetch_label>. =item * The C<cop_store_label> function has been added to the API, but is experimental. =item * F<embedvar.h> has been simplified, and one level of macro indirection for PL_* variables has been removed for the default (non-multiplicity) configuration. PERLVAR*() macros now directly expand their arguments to tokens such as C<PL_defgv>, instead of expanding to C<PL_Idefgv>, with F<embedvar.h> defining a macro to map C<PL_Idefgv> to C<PL_defgv>. XS code which has unwarranted chumminess with the implementation may need updating. =item * An API has been added to explicitly choose whether to export XSUB symbols. More detail can be found in the comments for commit e64345f8. =item * The C<is_gv_magical_sv> function has been eliminated and merged with C<gv_fetchpvn_flags>. It used to be called to determine whether a GV should be autovivified in rvalue context. Now it has been replaced with a new C<GV_ADDMG> flag (not part of the API). =item * The returned code point from the function C<utf8n_to_uvuni()> when the input is malformed UTF-8, malformations are allowed, and C<utf8> warnings are off is now the Unicode REPLACEMENT CHARACTER whenever the malformation is such that no well-defined code point can be computed. Previously the returned value was essentially garbage. The only malformations that have well-defined values are a zero-length string (0 is the return), and overlong UTF-8 sequences. =item * Padlists are now marked C<AvREAL>; i.e., reference-counted. They have always been reference-counted, but were not marked real, because F<pad.c> did its own clean-up, instead of using the usual clean-up code in F<sv.c>. That caused problems in thread cloning, so now the C<AvREAL> flag is on, but is turned off in F<pad.c> right before the padlist is freed (after F<pad.c> has done its custom freeing of the pads). =item * All C files that make up the Perl core have been converted to UTF-8. =item * These new functions have been added as part of the work on Unicode symbols: HvNAMELEN HvNAMEUTF8 HvENAMELEN HvENAMEUTF8 gv_init_pv gv_init_pvn gv_init_pvsv gv_fetchmeth_pv gv_fetchmeth_pvn gv_fetchmeth_sv gv_fetchmeth_pv_autoload gv_fetchmeth_pvn_autoload gv_fetchmeth_sv_autoload gv_fetchmethod_pv_flags gv_fetchmethod_pvn_flags gv_fetchmethod_sv_flags gv_autoload_pv gv_autoload_pvn gv_autoload_sv newGVgen_flags sv_derived_from_pv sv_derived_from_pvn sv_derived_from_sv sv_does_pv sv_does_pvn sv_does_sv whichsig_pv whichsig_pvn whichsig_sv newCONSTSUB_flags The gv_fetchmethod_*_flags functions, like gv_fetchmethod_flags, are experimental and may change in a future release. =item * The following functions were added. These are I<not> part of the API: GvNAMEUTF8 GvENAMELEN GvENAME_HEK CopSTASH_flags CopSTASH_flags_set PmopSTASH_flags PmopSTASH_flags_set sv_sethek HEKfARG There is also a C<HEKf> macro corresponding to C<SVf>, for interpolating HEKs in formatted strings. =item * C<sv_catpvn_flags> takes a couple of new internal-only flags, C<SV_CATBYTES> and C<SV_CATUTF8>, which tell it whether the char array to be concatenated is UTF8. This allows for more efficient concatenation than creating temporary SVs to pass to C<sv_catsv>. =item * For XS AUTOLOAD subs, $AUTOLOAD is set once more, as it was in 5.6.0. This is in addition to setting C<SvPVX(cv)>, for compatibility with 5.8 to 5.14. See L<perlguts/Autoloading with XSUBs>. =item * Perl now checks whether the array (the linearized isa) returned by a MRO plugin begins with the name of the class itself, for which the array was created, instead of assuming that it does. This prevents the first element from being skipped during method lookup. It also means that C<mro::get_linear_isa> may return an array with one more element than the MRO plugin provided [perl #94306]. =item * C<PL_curstash> is now reference-counted. =item * There are now feature bundle hints in C<PL_hints> (C<$^H>) that version declarations use, to avoid having to load F<feature.pm>. One setting of the hint bits indicates a "custom" feature bundle, which means that the entries in C<%^H> still apply. F<feature.pm> uses that. The C<HINT_FEATURE_MASK> macro is defined in F<perl.h> along with other hints. Other macros for setting and testing features and bundles are in the new F<feature.h>. C<FEATURE_IS_ENABLED> (which has moved to F<feature.h>) is no longer used throughout the codebase, but more specific macros, e.g., C<FEATURE_SAY_IS_ENABLED>, that are defined in F<feature.h>. =item * F<lib/feature.pm> is now a generated file, created by the new F<regen/feature.pl> script, which also generates F<feature.h>. =item * Tied arrays are now always C<AvREAL>. If C<@_> or C<DB::args> is tied, it is reified first, to make sure this is always the case. =item * Two new functions C<utf8_to_uvchr_buf()> and C<utf8_to_uvuni_buf()> have been added. These are the same as C<utf8_to_uvchr> and C<utf8_to_uvuni> (which are now deprecated), but take an extra parameter that is used to guard against reading beyond the end of the input string. See L<perlapi/utf8_to_uvchr_buf> and L<perlapi/utf8_to_uvuni_buf>. =item * The regular expression engine now does TRIE case insensitive matches under Unicode. This may change the output of C<< use re 'debug'; >>, and will speed up various things. =item * There is a new C<wrap_op_checker()> function, which provides a thread-safe alternative to writing to C<PL_check> directly. =back =head1 Selected Bug Fixes =head2 Array and hash =over =item * A bug has been fixed that would cause a "Use of freed value in iteration" error if the next two hash elements that would be iterated over are deleted [perl #85026]. (5.14.1) =item * Deleting the current hash iterator (the hash element that would be returned by the next call to C<each>) in void context used not to free it [perl #85026]. =item * Deletion of methods via C<delete $Class::{method}> syntax used to update method caches if called in void context, but not scalar or list context. =item * When hash elements are deleted in void context, the internal hash entry is now freed before the value is freed, to prevent destructors called by that latter freeing from seeing the hash in an inconsistent state. It was possible to cause double-frees if the destructor freed the hash itself [perl #100340]. =item * A C<keys> optimization in Perl 5.12.0 to make it faster on empty hashes caused C<each> not to reset the iterator if called after the last element was deleted. =item * Freeing deeply nested hashes no longer crashes [perl #44225]. =item * It is possible from XS code to create hashes with elements that have no values. The hash element and slice operators used to crash when handling these in lvalue context. They now produce a "Modification of non-creatable hash value attempted" error message. =item * If list assignment to a hash or array triggered destructors that freed the hash or array itself, a crash would ensue. This is no longer the case [perl #107440]. =item * It used to be possible to free the typeglob of a localized array or hash (e.g., C<local @{"x"}; delete $::{x}>), resulting in a crash on scope exit. =item * Some core bugs affecting L<Hash::Util> have been fixed: locking a hash element that is a glob copy no longer causes the next assignment to it to corrupt the glob (5.14.2), and unlocking a hash element that holds a copy-on-write scalar no longer causes modifications to that scalar to modify other scalars that were sharing the same string buffer. =back =head2 C API fixes =over =item * The C<newHVhv> XS function now works on tied hashes, instead of crashing or returning an empty hash. =item * The C<SvIsCOW> C macro now returns false for read-only copies of typeglobs, such as those created by: $hash{elem} = *foo; Hash::Util::lock_value %hash, 'elem'; It used to return true. =item * The C<SvPVutf8> C function no longer tries to modify its argument, resulting in errors [perl #108994]. =item * C<SvPVutf8> now works properly with magical variables. =item * C<SvPVbyte> now works properly non-PVs. =item * When presented with malformed UTF-8 input, the XS-callable functions C<is_utf8_string()>, C<is_utf8_string_loc()>, and C<is_utf8_string_loclen()> could read beyond the end of the input string by up to 12 bytes. This no longer happens. [perl #32080]. However, currently, C<is_utf8_char()> still has this defect, see L</is_utf8_char()> above. =item * The C-level C<pregcomp> function could become confused about whether the pattern was in UTF8 if the pattern was an overloaded, tied, or otherwise magical scalar [perl #101940]. =back =head2 Compile-time hints =over =item * Tying C<%^H> no longer causes perl to crash or ignore the contents of C<%^H> when entering a compilation scope [perl #106282]. =item * C<eval $string> and C<require> used not to localize C<%^H> during compilation if it was empty at the time the C<eval> call itself was compiled. This could lead to scary side effects, like C<use re "/m"> enabling other flags that the surrounding code was trying to enable for its caller [perl #68750]. =item * C<eval $string> and C<require> no longer localize hints (C<$^H> and C<%^H>) at run time, but only during compilation of the $string or required file. This makes C<BEGIN { $^H{foo}=7 }> equivalent to C<BEGIN { eval '$^H{foo}=7' }> [perl #70151]. =item * Creating a BEGIN block from XS code (via C<newXS> or C<newATTRSUB>) would, on completion, make the hints of the current compiling code the current hints. This could cause warnings to occur in a non-warning scope. =back =head2 Copy-on-write scalars Copy-on-write or shared hash key scalars were introduced in 5.8.0, but most Perl code did not encounter them (they were used mostly internally). Perl 5.10.0 extended them, such that assigning C<__PACKAGE__> or a hash key to a scalar would make it copy-on-write. Several parts of Perl were not updated to account for them, but have now been fixed. =over =item * C<utf8::decode> had a nasty bug that would modify copy-on-write scalars' string buffers in place (i.e., skipping the copy). This could result in hashes having two elements with the same key [perl #91834]. (5.14.2) =item * Lvalue subroutines were not allowing COW scalars to be returned. This was fixed for lvalue scalar context in Perl 5.12.3 and 5.14.0, but list context was not fixed until this release. =item * Elements of restricted hashes (see the L<fields> pragma) containing copy-on-write values couldn't be deleted, nor could such hashes be cleared (C<%hash = ()>). (5.14.2) =item * Localizing a tied variable used to make it read-only if it contained a copy-on-write string. (5.14.2) =item * Assigning a copy-on-write string to a stash element no longer causes a double free. Regardless of this change, the results of such assignments are still undefined. =item * Assigning a copy-on-write string to a tied variable no longer stops that variable from being tied if it happens to be a PVMG or PVLV internally. =item * Doing a substitution on a tied variable returning a copy-on-write scalar used to cause an assertion failure or an "Attempt to free nonexistent shared string" warning. =item * This one is a regression from 5.12: In 5.14.0, the bitwise assignment operators C<|=>, C<^=> and C<&=> started leaving the left-hand side undefined if it happened to be a copy-on-write string [perl #108480]. =item * L<Storable>, L<Devel::Peek> and L<PerlIO::scalar> had similar problems. See L</Updated Modules and Pragmata>, above. =back =head2 The debugger =over =item * F<dumpvar.pl>, and therefore the C<x> command in the debugger, have been fixed to handle objects blessed into classes whose names contain "=". The contents of such objects used not to be dumped [perl #101814]. =item * The "R" command for restarting a debugger session has been fixed to work on Windows, or any other system lacking a C<POSIX::_SC_OPEN_MAX> constant [perl #87740]. =item * The C<#line 42 foo> directive used not to update the arrays of lines used by the debugger if it occurred in a string eval. This was partially fixed in 5.14, but it worked only for a single C<#line 42 foo> in each eval. Now it works for multiple. =item * When subroutine calls are intercepted by the debugger, the name of the subroutine or a reference to it is stored in C<$DB::sub>, for the debugger to access. Sometimes (such as C<$foo = *bar; undef *bar; &$foo>) C<$DB::sub> would be set to a name that could not be used to find the subroutine, and so the debugger's attempt to call it would fail. Now the check to see whether a reference is needed is more robust, so those problems should not happen anymore [rt.cpan.org #69862]. =item * Every subroutine has a filename associated with it that the debugger uses. The one associated with constant subroutines used to be misallocated when cloned under threads. Consequently, debugging threaded applications could result in memory corruption [perl #96126]. =back =head2 Dereferencing operators =over =item * C<defined(${"..."})>, C<defined(*{"..."})>, etc., used to return true for most, but not all built-in variables, if they had not been used yet. This bug affected C<${^GLOBAL_PHASE}> and C<${^UTF8CACHE}>, among others. It also used to return false if the package name was given as well (C<${"::!"}>) [perl #97978, #97492]. =item * Perl 5.10.0 introduced a similar bug: C<defined(*{"foo"})> where "foo" represents the name of a built-in global variable used to return false if the variable had never been used before, but only on the I<first> call. This, too, has been fixed. =item * Since 5.6.0, C<*{ ... }> has been inconsistent in how it treats undefined values. It would die in strict mode or lvalue context for most undefined values, but would be treated as the empty string (with a warning) for the specific scalar return by C<undef()> (C<&PL_sv_undef> internally). This has been corrected. C<undef()> is now treated like other undefined scalars, as in Perl 5.005. =back =head2 Filehandle, last-accessed Perl has an internal variable that stores the last filehandle to be accessed. It is used by C<$.> and by C<tell> and C<eof> without arguments. =over =item * It used to be possible to set this internal variable to a glob copy and then modify that glob copy to be something other than a glob, and still have the last-accessed filehandle associated with the variable after assigning a glob to it again: my $foo = *STDOUT; # $foo is a glob copy <$foo>; # $foo is now the last-accessed handle $foo = 3; # no longer a glob $foo = *STDERR; # still the last-accessed handle Now the C<$foo = 3> assignment unsets that internal variable, so there is no last-accessed filehandle, just as if C<< <$foo> >> had never happened. This also prevents some unrelated handle from becoming the last-accessed handle if $foo falls out of scope and the same internal SV gets used for another handle [perl #97988]. =item * A regression in 5.14 caused these statements not to set that internal variable: my $fh = *STDOUT; tell $fh; eof $fh; seek $fh, 0,0; tell *$fh; eof *$fh; seek *$fh, 0,0; readline *$fh; This is now fixed, but C<tell *{ *$fh }> still has the problem, and it is not clear how to fix it [perl #106536]. =back =head2 Filetests and C<stat> The term "filetests" refers to the operators that consist of a hyphen followed by a single letter: C<-r>, C<-x>, C<-M>, etc. The term "stacked" when applied to filetests means followed by another filetest operator sharing the same operand, as in C<-r -x -w $fooo>. =over =item * C<stat> produces more consistent warnings. It no longer warns for "_" [perl #71002] and no longer skips the warning at times for other unopened handles. It no longer warns about an unopened handle when the operating system's C<fstat> function fails. =item * C<stat> would sometimes return negative numbers for large inode numbers, because it was using the wrong internal C type. [perl #84590] =item * C<lstat> is documented to fall back to C<stat> (with a warning) when given a filehandle. When passed an IO reference, it was actually doing the equivalent of S<C<stat _>> and ignoring the handle. =item * C<-T _> with no preceding C<stat> used to produce a confusing "uninitialized" warning, even though there is no visible uninitialized value to speak of. =item * C<-T>, C<-B>, C<-l> and C<-t> now work when stacked with other filetest operators [perl #77388]. =item * In 5.14.0, filetest ops (C<-r>, C<-x>, etc.) started calling FETCH on a tied argument belonging to the previous argument to a list operator, if called with a bareword argument or no argument at all. This has been fixed, so C<push @foo, $tied, -r> no longer calls FETCH on C<$tied>. =item * In Perl 5.6, C<-l> followed by anything other than a bareword would treat its argument as a file name. That was changed in 5.8 for glob references (C<\*foo>), but not for globs themselves (C<*foo>). C<-l> started returning C<undef> for glob references without setting the last stat buffer that the "_" handle uses, but only if warnings were turned on. With warnings off, it was the same as 5.6. In other words, it was simply buggy and inconsistent. Now the 5.6 behavior has been restored. =item * C<-l> followed by a bareword no longer "eats" the previous argument to the list operator in whose argument list it resides. Hence, C<print "bar", -l foo> now actually prints "bar", because C<-l> on longer eats it. =item * Perl keeps several internal variables to keep track of the last stat buffer, from which file(handle) it originated, what type it was, and whether the last stat succeeded. There were various cases where these could get out of synch, resulting in inconsistent or erratic behavior in edge cases (every mention of C<-T> applies to C<-B> as well): =over =item * C<-T I<HANDLE>>, even though it does a C<stat>, was not resetting the last stat type, so an C<lstat _> following it would merrily return the wrong results. Also, it was not setting the success status. =item * Freeing the handle last used by C<stat> or a filetest could result in S<C<-T _>> using an unrelated handle. =item * C<stat> with an IO reference would not reset the stat type or record the filehandle for S<C<-T _>> to use. =item * Fatal warnings could cause the stat buffer not to be reset for a filetest operator on an unopened filehandle or C<-l> on any handle. Fatal warnings also stopped C<-T> from setting C<$!>. =item * When the last stat was on an unreadable file, C<-T _> is supposed to return C<undef>, leaving the last stat buffer unchanged. But it was setting the stat type, causing C<lstat _> to stop working. =item * C<-T I<FILENAME>> was not resetting the internal stat buffers for unreadable files. =back These have all been fixed. =back =head2 Formats =over =item * Several edge cases have been fixed with formats and C<formline>; in particular, where the format itself is potentially variable (such as with ties and overloading), and where the format and data differ in their encoding. In both these cases, it used to possible for the output to be corrupted [perl #91032]. =item * C<formline> no longer converts its argument into a string in-place. So passing a reference to C<formline> no longer destroys the reference [perl #79532]. =item * Assignment to C<$^A> (the format output accumulator) now recalculates the number of lines output. =back =head2 C<given> and C<when> =over =item * C<given> was not scoping its implicit $_ properly, resulting in memory leaks or "Variable is not available" warnings [perl #94682]. =item * C<given> was not calling set-magic on the implicit lexical C<$_> that it uses. This meant, for example, that C<pos> would be remembered from one execution of the same C<given> block to the next, even if the input were a different variable [perl #84526]. =item * C<when> blocks are now capable of returning variables declared inside the enclosing C<given> block [perl #93548]. =back =head2 The C<glob> operator =over =item * On OSes other than VMS, Perl's C<glob> operator (and the C<< <...> >> form) use L<File::Glob> underneath. L<File::Glob> splits the pattern into words, before feeding each word to its C<bsd_glob> function. There were several inconsistencies in the way the split was done. Now quotation marks (' and ") are always treated as shell-style word delimiters (that allow whitespace as part of a word) and backslashes are always preserved, unless they exist to escape quotation marks. Before, those would only sometimes be the case, depending on whether the pattern contained whitespace. Also, escaped whitespace at the end of the pattern is no longer stripped [perl #40470]. =item * C<CORE::glob> now works as a way to call the default globbing function. It used to respect overrides, despite the C<CORE::> prefix. =item * Under miniperl (used to configure modules when perl itself is built), C<glob> now clears %ENV before calling csh, since the latter croaks on some systems if it does not like the contents of the LS_COLORS environment variable [perl #98662]. =back =head2 Lvalue subroutines =over =item * Explicit return now returns the actual argument passed to return, instead of copying it [perl #72724, #72706]. =item * Lvalue subroutines used to enforce lvalue syntax (i.e., whatever can go on the left-hand side of C<=>) for the last statement and the arguments to return. Since lvalue subroutines are not always called in lvalue context, this restriction has been lifted. =item * Lvalue subroutines are less restrictive about what values can be returned. It used to croak on values returned by C<shift> and C<delete> and from other subroutines, but no longer does so [perl #71172]. =item * Empty lvalue subroutines (C<sub :lvalue {}>) used to return C<@_> in list context. All subroutines used to do this, but regular subs were fixed in Perl 5.8.2. Now lvalue subroutines have been likewise fixed. =item * Autovivification now works on values returned from lvalue subroutines [perl #7946], as does returning C<keys> in lvalue context. =item * Lvalue subroutines used to copy their return values in rvalue context. Not only was this a waste of CPU cycles, but it also caused bugs. A C<($)> prototype would cause an lvalue sub to copy its return value [perl #51408], and C<while(lvalue_sub() =~ m/.../g) { ... }> would loop endlessly [perl #78680]. =item * When called in potential lvalue context (e.g., subroutine arguments or a list passed to C<for>), lvalue subroutines used to copy any read-only value that was returned. E.g., C< sub :lvalue { $] } > would not return C<$]>, but a copy of it. =item * When called in potential lvalue context, an lvalue subroutine returning arrays or hashes used to bind the arrays or hashes to scalar variables, resulting in bugs. This was fixed in 5.14.0 if an array were the first thing returned from the subroutine (but not for C<$scalar, @array> or hashes being returned). Now a more general fix has been applied [perl #23790]. =item * Method calls whose arguments were all surrounded with C<my()> or C<our()> (as in C<< $object->method(my($a,$b)) >>) used to force lvalue context on the subroutine. This would prevent lvalue methods from returning certain values. =item * Lvalue sub calls that are not determined to be such at compile time (C<&$name> or &{"name"}) are no longer exempt from strict refs if they occur in the last statement of an lvalue subroutine [perl #102486]. =item * Sub calls whose subs are not visible at compile time, if they occurred in the last statement of an lvalue subroutine, would reject non-lvalue subroutines and die with "Can't modify non-lvalue subroutine call" [perl #102486]. Non-lvalue sub calls whose subs I<are> visible at compile time exhibited the opposite bug. If the call occurred in the last statement of an lvalue subroutine, there would be no error when the lvalue sub was called in lvalue context. Perl would blindly assign to the temporary value returned by the non-lvalue subroutine. =item * C<AUTOLOAD> routines used to take precedence over the actual sub being called (i.e., when autoloading wasn't needed), for sub calls in lvalue or potential lvalue context, if the subroutine was not visible at compile time. =item * Applying the C<:lvalue> attribute to an XSUB or to an aliased subroutine stub with C<< sub foo :lvalue; >> syntax stopped working in Perl 5.12. This has been fixed. =item * Applying the :lvalue attribute to subroutine that is already defined does not work properly, as the attribute changes the way the sub is compiled. Hence, Perl 5.12 began warning when an attempt is made to apply the attribute to an already defined sub. In such cases, the attribute is discarded. But the change in 5.12 missed the case where custom attributes are also present: that case still silently and ineffectively applied the attribute. That omission has now been corrected. C<sub foo :lvalue :Whatever> (when C<foo> is already defined) now warns about the :lvalue attribute, and does not apply it. =item * A bug affecting lvalue context propagation through nested lvalue subroutine calls has been fixed. Previously, returning a value in nested rvalue context would be treated as lvalue context by the inner subroutine call, resulting in some values (such as read-only values) being rejected. =back =head2 Overloading =over =item * Arithmetic assignment (C<$left += $right>) involving overloaded objects that rely on the 'nomethod' override no longer segfault when the left operand is not overloaded. =item * Errors that occur when methods cannot be found during overloading now mention the correct package name, as they did in 5.8.x, instead of erroneously mentioning the "overload" package, as they have since 5.10.0. =item * Undefining C<%overload::> no longer causes a crash. =back =head2 Prototypes of built-in keywords =over =item * The C<prototype> function no longer dies for the C<__FILE__>, C<__LINE__> and C<__PACKAGE__> directives. It now returns an empty-string prototype for them, because they are syntactically indistinguishable from nullary functions like C<time>. =item * C<prototype> now returns C<undef> for all overridable infix operators, such as C<eq>, which are not callable in any way resembling functions. It used to return incorrect prototypes for some and die for others [perl #94984]. =item * The prototypes of several built-in functions--C<getprotobynumber>, C<lock>, C<not> and C<select>--have been corrected, or at least are now closer to reality than before. =back =head2 Regular expressions =for comment Is it possible to merge some of these items? =over 4 =item * C</[[:ascii:]]/> and C</[[:blank:]]/> now use locale rules under C<use locale> when the platform supports that. Previously, they used the platform's native character set. =item * C<m/[[:ascii:]]/i> and C</\p{ASCII}/i> now match identically (when not under a differing locale). This fixes a regression introduced in 5.14 in which the first expression could match characters outside of ASCII, such as the KELVIN SIGN. =item * C</.*/g> would sometimes refuse to match at the end of a string that ends with "\n". This has been fixed [perl #109206]. =item * Starting with 5.12.0, Perl used to get its internal bookkeeping muddled up after assigning C<${ qr// }> to a hash element and locking it with L<Hash::Util>. This could result in double frees, crashes, or erratic behavior. =item * The new (in 5.14.0) regular expression modifier C</a> when repeated like C</aa> forbids the characters outside the ASCII range that match characters inside that range from matching under C</i>. This did not work under some circumstances, all involving alternation, such as: "\N{KELVIN SIGN}" =~ /k|foo/iaa; succeeded inappropriately. This is now fixed. =item * 5.14.0 introduced some memory leaks in regular expression character classes such as C<[\w\s]>, which have now been fixed. (5.14.1) =item * An edge case in regular expression matching could potentially loop. This happened only under C</i> in bracketed character classes that have characters with multi-character folds, and the target string to match against includes the first portion of the fold, followed by another character that has a multi-character fold that begins with the remaining portion of the fold, plus some more. "s\N{U+DF}" =~ /[\x{DF}foo]/i is one such case. C<\xDF> folds to C<"ss">. (5.14.1) =item * A few characters in regular expression pattern matches did not match correctly in some circumstances, all involving C</i>. The affected characters are: COMBINING GREEK YPOGEGRAMMENI, GREEK CAPITAL LETTER IOTA, GREEK CAPITAL LETTER UPSILON, GREEK PROSGEGRAMMENI, GREEK SMALL LETTER IOTA WITH DIALYTIKA AND OXIA, GREEK SMALL LETTER IOTA WITH DIALYTIKA AND TONOS, GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND OXIA, GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND TONOS, LATIN SMALL LETTER LONG S, LATIN SMALL LIGATURE LONG S T, and LATIN SMALL LIGATURE ST. =item * A memory leak regression in regular expression compilation under threading has been fixed. =item * A regression introduced in 5.14.0 has been fixed. This involved an inverted bracketed character class in a regular expression that consisted solely of a Unicode property. That property wasn't getting inverted outside the Latin1 range. =item * Three problematic Unicode characters now work better in regex pattern matching under C</i>. In the past, three Unicode characters: LATIN SMALL LETTER SHARP S, GREEK SMALL LETTER IOTA WITH DIALYTIKA AND TONOS, and GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND TONOS, along with the sequences that they fold to (including "ss" for LATIN SMALL LETTER SHARP S), did not properly match under C</i>. 5.14.0 fixed some of these cases, but introduced others, including a panic when one of the characters or sequences was used in the C<(?(DEFINE)> regular expression predicate. The known bugs that were introduced in 5.14 have now been fixed; as well as some other edge cases that have never worked until now. These all involve using the characters and sequences outside bracketed character classes under C</i>. This closes [perl #98546]. There remain known problems when using certain characters with multi-character folds inside bracketed character classes, including such constructs as C<qr/[\N{LATIN SMALL LETTER SHARP}a-z]/i>. These remaining bugs are addressed in [perl #89774]. =item * RT #78266: The regex engine has been leaking memory when accessing named captures that weren't matched as part of a regex ever since 5.10 when they were introduced; e.g., this would consume over a hundred MB of memory: for (1..10_000_000) { if ("foo" =~ /(foo|(?<capture>bar))?/) { my $capture = $+{capture} } } system "ps -o rss $$"' =item * In 5.14, C</[[:lower:]]/i> and C</[[:upper:]]/i> no longer matched the opposite case. This has been fixed [perl #101970]. =item * A regular expression match with an overloaded object on the right-hand side would sometimes stringify the object too many times. =item * A regression has been fixed that was introduced in 5.14, in C</i> regular expression matching, in which a match improperly fails if the pattern is in UTF-8, the target string is not, and a Latin-1 character precedes a character in the string that should match the pattern. [perl #101710] =item * In case-insensitive regular expression pattern matching, no longer on UTF-8 encoded strings does the scan for the start of match look only at the first possible position. This caused matches such as C<"f\x{FB00}" =~ /ff/i> to fail. =item * The regexp optimizer no longer crashes on debugging builds when merging fixed-string nodes with inconvenient contents. =item * A panic involving the combination of the regular expression modifiers C</aa> and the C<\b> escape sequence introduced in 5.14.0 has been fixed [perl #95964]. (5.14.2) =item * The combination of the regular expression modifiers C</aa> and the C<\b> and C<\B> escape sequences did not work properly on UTF-8 encoded strings. All non-ASCII characters under C</aa> should be treated as non-word characters, but what was happening was that Unicode rules were used to determine wordness/non-wordness for non-ASCII characters. This is now fixed [perl #95968]. =item * C<< (?foo: ...) >> no longer loses passed in character set. =item * The trie optimization used to have problems with alternations containing an empty C<(?:)>, causing C<< "x" =~ /\A(?>(?:(?:)A|B|C?x))\z/ >> not to match, whereas it should [perl #111842]. =item * Use of lexical (C<my>) variables in code blocks embedded in regular expressions will no longer result in memory corruption or crashes. Nevertheless, these code blocks are still experimental, as there are still problems with the wrong variables being closed over (in loops for instance) and with abnormal exiting (e.g., C<die>) causing memory corruption. =item * The C<\h>, C<\H>, C<\v> and C<\V> regular expression metacharacters used to cause a panic error message when trying to match at the end of the string [perl #96354]. =item * The abbreviations for four C1 control characters C<MW> C<PM>, C<RI>, and C<ST> were previously unrecognized by C<\N{}>, vianame(), and string_vianame(). =item * Mentioning a variable named "&" other than C<$&> (i.e., C<@&> or C<%&>) no longer stops C<$&> from working. The same applies to variables named "'" and "`" [perl #24237]. =item * Creating a C<UNIVERSAL::AUTOLOAD> sub no longer stops C<%+>, C<%-> and C<%!> from working some of the time [perl #105024]. =back =head2 Smartmatching =over =item * C<~~> now correctly handles the precedence of Any~~Object, and is not tricked by an overloaded object on the left-hand side. =item * In Perl 5.14.0, C<$tainted ~~ @array> stopped working properly. Sometimes it would erroneously fail (when C<$tainted> contained a string that occurs in the array I<after> the first element) or erroneously succeed (when C<undef> occurred after the first element) [perl #93590]. =back =head2 The C<sort> operator =over =item * C<sort> was not treating C<sub {}> and C<sub {()}> as equivalent when such a sub was provided as the comparison routine. It used to croak on C<sub {()}>. =item * C<sort> now works once more with custom sort routines that are XSUBs. It stopped working in 5.10.0. =item * C<sort> with a constant for a custom sort routine, although it produces unsorted results, no longer crashes. It started crashing in 5.10.0. =item * Warnings emitted by C<sort> when a custom comparison routine returns a non-numeric value now contain "in sort" and show the line number of the C<sort> operator, rather than the last line of the comparison routine. The warnings also now occur only if warnings are enabled in the scope where C<sort> occurs. Previously the warnings would occur if enabled in the comparison routine's scope. =item * C<< sort { $a <=> $b } >>, which is optimized internally, now produces "uninitialized" warnings for NaNs (not-a-number values), since C<< <=> >> returns C<undef> for those. This brings it in line with S<C<< sort { 1; $a <=> $b } >>> and other more complex cases, which are not optimized [perl #94390]. =back =head2 The C<substr> operator =over =item * Tied (and otherwise magical) variables are no longer exempt from the "Attempt to use reference as lvalue in substr" warning. =item * That warning now occurs when the returned lvalue is assigned to, not when C<substr> itself is called. This makes a difference only if the return value of C<substr> is referenced and later assigned to. =item * Passing a substring of a read-only value or a typeglob to a function (potential lvalue context) no longer causes an immediate "Can't coerce" or "Modification of a read-only value" error. That error occurs only if the passed value is assigned to. The same thing happens with the "substr outside of string" error. If the lvalue is only read from, not written to, it is now just a warning, as with rvalue C<substr>. =item * C<substr> assignments no longer call FETCH twice if the first argument is a tied variable, just once. =back =head2 Support for embedded nulls Some parts of Perl did not work correctly with nulls (C<chr 0>) embedded in strings. That meant that, for instance, C<< $m = "a\0b"; foo->$m >> would call the "a" method, instead of the actual method name contained in $m. These parts of perl have been fixed to support nulls: =over =item * Method names =item * Typeglob names (including filehandle and subroutine names) =item * Package names, including the return value of C<ref()> =item * Typeglob elements (C<*foo{"THING\0stuff"}>) =item * Signal names =item * Various warnings and error messages that mention variable names or values, methods, etc. =back One side effect of these changes is that blessing into "\0" no longer causes C<ref()> to return false. =head2 Threading bugs =over =item * Typeglobs returned from threads are no longer cloned if the parent thread already has a glob with the same name. This means that returned subroutines will now assign to the right package variables [perl #107366]. =item * Some cases of threads crashing due to memory allocation during cloning have been fixed [perl #90006]. =item * Thread joining would sometimes emit "Attempt to free unreferenced scalar" warnings if C<caller> had been used from the C<DB> package before thread creation [perl #98092]. =item * Locking a subroutine (via C<lock &sub>) is no longer a compile-time error for regular subs. For lvalue subroutines, it no longer tries to return the sub as a scalar, resulting in strange side effects like C<ref \$_> returning "CODE" in some instances. C<lock &sub> is now a run-time error if L<threads::shared> is loaded (a no-op otherwise), but that may be rectified in a future version. =back =head2 Tied variables =over =item * Various cases in which FETCH was being ignored or called too many times have been fixed: =over =item * C<PerlIO::get_layers> [perl #97956] =item * C<$tied =~ y/a/b/>, C<chop $tied> and C<chomp $tied> when $tied holds a reference. =item * When calling C<local $_> [perl #105912] =item * Four-argument C<select> =item * A tied buffer passed to C<sysread> =item * C<< $tied .= <> >> =item * Three-argument C<open>, the third being a tied file handle (as in C<< open $fh, ">&", $tied >>) =item * C<sort> with a reference to a tied glob for the comparison routine. =item * C<..> and C<...> in list context [perl #53554]. =item * C<${$tied}>, C<@{$tied}>, C<%{$tied}> and C<*{$tied}> where the tied variable returns a string (C<&{}> was unaffected) =item * C<defined ${ $tied_variable }> =item * Various functions that take a filehandle argument in rvalue context (C<close>, C<readline>, etc.) [perl #97482] =item * Some cases of dereferencing a complex expression, such as C<${ (), $tied } = 1>, used to call C<FETCH> multiple times, but now call it once. =item * C<$tied-E<gt>method> where $tied returns a package name--even resulting in a failure to call the method, due to memory corruption =item * Assignments like C<*$tied = \&{"..."}> and C<*glob = $tied> =item * C<chdir>, C<chmod>, C<chown>, C<utime>, C<truncate>, C<stat>, C<lstat> and the filetest ops (C<-r>, C<-x>, etc.) =back =item * C<caller> sets C<@DB::args> to the subroutine arguments when called from the DB package. It used to crash when doing so if C<@DB::args> happened to be tied. Now it croaks instead. =item * Tying an element of %ENV or C<%^H> and then deleting that element would result in a call to the tie object's DELETE method, even though tying the element itself is supposed to be equivalent to tying a scalar (the element is, of course, a scalar) [perl #67490]. =item * When Perl autovivifies an element of a tied array or hash (which entails calling STORE with a new reference), it now calls FETCH immediately after the STORE, instead of assuming that FETCH would have returned the same reference. This can make it easier to implement tied objects [perl #35865, #43011]. =item * Four-argument C<select> no longer produces its "Non-string passed as bitmask" warning on tied or tainted variables that are strings. =item * Localizing a tied scalar that returns a typeglob no longer stops it from being tied till the end of the scope. =item * Attempting to C<goto> out of a tied handle method used to cause memory corruption or crashes. Now it produces an error message instead [perl #8611]. =item * A bug has been fixed that occurs when a tied variable is used as a subroutine reference: if the last thing assigned to or returned from the variable was a reference or typeglob, the C<\&$tied> could either crash or return the wrong subroutine. The reference case is a regression introduced in Perl 5.10.0. For typeglobs, it has probably never worked till now. =back =head2 Version objects and vstrings =over =item * The bitwise complement operator (and possibly other operators, too) when passed a vstring would leave vstring magic attached to the return value, even though the string had changed. This meant that C<< version->new(~v1.2.3) >> would create a version looking like "v1.2.3" even though the string passed to C<< version->new >> was actually "\376\375\374". This also caused L<B::Deparse> to deparse C<~v1.2.3> incorrectly, without the C<~> [perl #29070]. =item * Assigning a vstring to a magic (e.g., tied, C<$!>) variable and then assigning something else used to blow away all magic. This meant that tied variables would come undone, C<$!> would stop getting updated on failed system calls, C<$|> would stop setting autoflush, and other mischief would take place. This has been fixed. =item * C<< version->new("version") >> and C<printf "%vd", "version"> no longer crash [perl #102586]. =item * Version comparisons, such as those that happen implicitly with C<use v5.43>, no longer cause locale settings to change [perl #105784]. =item * Version objects no longer cause memory leaks in boolean context [perl #109762]. =back =head2 Warnings, redefinition =over =item * Subroutines from the C<autouse> namespace are once more exempt from redefinition warnings. This used to work in 5.005, but was broken in 5.6 for most subroutines. For subs created via XS that redefine subroutines from the C<autouse> package, this stopped working in 5.10. =item * New XSUBs now produce redefinition warnings if they overwrite existing subs, as they did in 5.8.x. (The C<autouse> logic was reversed in 5.10-14. Only subroutines from the C<autouse> namespace would warn when clobbered.) =item * C<newCONSTSUB> used to use compile-time warning hints, instead of run-time hints. The following code should never produce a redefinition warning, but it used to, if C<newCONSTSUB> redefined an existing subroutine: use warnings; BEGIN { no warnings; some_XS_function_that_calls_new_CONSTSUB(); } =item * Redefinition warnings for constant subroutines are on by default (what are known as severe warnings in L<perldiag>). This occurred only when it was a glob assignment or declaration of a Perl subroutine that caused the warning. If the creation of XSUBs triggered the warning, it was not a default warning. This has been corrected. =item * The internal check to see whether a redefinition warning should occur used to emit "uninitialized" warnings in cases like this: use warnings "uninitialized"; use constant {u => undef, v => undef}; sub foo(){u} sub foo(){v} =back =head2 Warnings, "Uninitialized" =over =item * Various functions that take a filehandle argument in rvalue context (C<close>, C<readline>, etc.) used to warn twice for an undefined handle [perl #97482]. =item * C<dbmopen> now only warns once, rather than three times, if the mode argument is C<undef> [perl #90064]. =item * The C<+=> operator does not usually warn when the left-hand side is C<undef>, but it was doing so for tied variables. This has been fixed [perl #44895]. =item * A bug fix in Perl 5.14 introduced a new bug, causing "uninitialized" warnings to report the wrong variable if the operator in question had two operands and one was C<%{...}> or C<@{...}>. This has been fixed [perl #103766]. =item * C<..> and C<...> in list context now mention the name of the variable in "uninitialized" warnings for string (as opposed to numeric) ranges. =back =head2 Weak references =over =item * Weakening the first argument to an automatically-invoked C<DESTROY> method could result in erroneous "DESTROY created new reference" errors or crashes. Now it is an error to weaken a read-only reference. =item * Weak references to lexical hashes going out of scope were not going stale (becoming undefined), but continued to point to the hash. =item * Weak references to lexical variables going out of scope are now broken before any magical methods (e.g., DESTROY on a tie object) are called. This prevents such methods from modifying the variable that will be seen the next time the scope is entered. =item * Creating a weak reference to an @ISA array or accessing the array index (C<$#ISA>) could result in confused internal bookkeeping for elements later added to the @ISA array. For instance, creating a weak reference to the element itself could push that weak reference on to @ISA; and elements added after use of C<$#ISA> would be ignored by method lookup [perl #85670]. =back =head2 Other notable fixes =over =item * C<quotemeta> now quotes consistently the same non-ASCII characters under C<use feature 'unicode_strings'>, regardless of whether the string is encoded in UTF-8 or not, hence fixing the last vestiges (we hope) of the notorious L<perlunicode/The "Unicode Bug">. [perl #77654]. Which of these code points is quoted has changed, based on Unicode's recommendations. See L<perlfunc/quotemeta> for details. =item * C<study> is now a no-op, presumably fixing all outstanding bugs related to study causing regex matches to behave incorrectly! =item * When one writes C<open foo || die>, which used to work in Perl 4, a "Precedence problem" warning is produced. This warning used erroneously to apply to fully-qualified bareword handle names not followed by C<||>. This has been corrected. =item * After package aliasing (C<*foo:: = *bar::>), C<select> with 0 or 1 argument would sometimes return a name that could not be used to refer to the filehandle, or sometimes it would return C<undef> even when a filehandle was selected. Now it returns a typeglob reference in such cases. =item * C<PerlIO::get_layers> no longer ignores some arguments that it thinks are numeric, while treating others as filehandle names. It is now consistent for flat scalars (i.e., not references). =item * Unrecognized switches on C<#!> line If a switch, such as B<-x>, that cannot occur on the C<#!> line is used there, perl dies with "Can't emulate...". It used to produce the same message for switches that perl did not recognize at all, whether on the command line or the C<#!> line. Now it produces the "Unrecognized switch" error message [perl #104288]. =item * C<system> now temporarily blocks the SIGCHLD signal handler, to prevent the signal handler from stealing the exit status [perl #105700]. =item * The %n formatting code for C<printf> and C<sprintf>, which causes the number of characters to be assigned to the next argument, now actually assigns the number of characters, instead of the number of bytes. It also works now with special lvalue functions like C<substr> and with nonexistent hash and array elements [perl #3471, #103492]. =item * Perl skips copying values returned from a subroutine, for the sake of speed, if doing so would make no observable difference. Because of faulty logic, this would happen with the result of C<delete>, C<shift> or C<splice>, even if the result was referenced elsewhere. It also did so with tied variables about to be freed [perl #91844, #95548]. =item * C<utf8::decode> now refuses to modify read-only scalars [perl #91850]. =item * Freeing $_ inside a C<grep> or C<map> block, a code block embedded in a regular expression, or an @INC filter (a subroutine returned by a subroutine in @INC) used to result in double frees or crashes [perl #91880, #92254, #92256]. =item * C<eval> returns C<undef> in scalar context or an empty list in list context when there is a run-time error. When C<eval> was passed a string in list context and a syntax error occurred, it used to return a list containing a single undefined element. Now it returns an empty list in list context for all errors [perl #80630]. =item * C<goto &func> no longer crashes, but produces an error message, when the unwinding of the current subroutine's scope fires a destructor that undefines the subroutine being "goneto" [perl #99850]. =item * Perl now holds an extra reference count on the package that code is currently compiling in. This means that the following code no longer crashes [perl #101486]: package Foo; BEGIN {*Foo:: = *Bar::} sub foo; =item * The C<x> repetition operator no longer crashes on 64-bit builds with large repeat counts [perl #94560]. =item * Calling C<require> on an implicit C<$_> when C<*CORE::GLOBAL::require> has been overridden does not segfault anymore, and C<$_> is now passed to the overriding subroutine [perl #78260]. =item * C<use> and C<require> are no longer affected by the I/O layers active in the caller's scope (enabled by L<open.pm|open>) [perl #96008]. =item * C<our $::é; $é> (which is invalid) no longer produces the "Compilation error at lib/utf8_heavy.pl..." error message, which it started emitting in 5.10.0 [perl #99984]. =item * On 64-bit systems, C<read()> now understands large string offsets beyond the 32-bit range. =item * Errors that occur when processing subroutine attributes no longer cause the subroutine's op tree to leak. =item * Passing the same constant subroutine to both C<index> and C<formline> no longer causes one or the other to fail [perl #89218]. (5.14.1) =item * List assignment to lexical variables declared with attributes in the same statement (C<my ($x,@y) : blimp = (72,94)>) stopped working in Perl 5.8.0. It has now been fixed. =item * Perl 5.10.0 introduced some faulty logic that made "U*" in the middle of a pack template equivalent to "U0" if the input string was empty. This has been fixed [perl #90160]. (5.14.2) =item * Destructors on objects were not called during global destruction on objects that were not referenced by any scalars. This could happen if an array element were blessed (e.g., C<bless \$a[0]>) or if a closure referenced a blessed variable (C<bless \my @a; sub foo { @a }>). Now there is an extra pass during global destruction to fire destructors on any objects that might be left after the usual passes that check for objects referenced by scalars [perl #36347]. =item * Fixed a case where it was possible that a freed buffer may have been read from when parsing a here document [perl #90128]. (5.14.1) =item * C<each(I<ARRAY>)> is now wrapped in C<defined(...)>, like C<each(I<HASH>)>, inside a C<while> condition [perl #90888]. =item * A problem with context propagation when a C<do> block is an argument to C<return> has been fixed. It used to cause C<undef> to be returned in certain cases of a C<return> inside an C<if> block which itself is followed by another C<return>. =item * Calling C<index> with a tainted constant no longer causes constants in subsequently compiled code to become tainted [perl #64804]. =item * Infinite loops like C<1 while 1> used to stop C<strict 'subs'> mode from working for the rest of the block. =item * For list assignments like C<($a,$b) = ($b,$a)>, Perl has to make a copy of the items on the right-hand side before assignment them to the left. For efficiency's sake, it assigns the values on the right straight to the items on the left if no one variable is mentioned on both sides, as in C<($a,$b) = ($c,$d)>. The logic for determining when it can cheat was faulty, in that C<&&> and C<||> on the right-hand side could fool it. So C<($a,$b) = $some_true_value && ($b,$a)> would end up assigning the value of C<$b> to both scalars. =item * Perl no longer tries to apply lvalue context to the string in C<("string", $variable) ||= 1> (which used to be an error). Since the left-hand side of C<||=> is evaluated in scalar context, that's a scalar comma operator, which gives all but the last item void context. There is no such thing as void lvalue context, so it was a mistake for Perl to try to force it [perl #96942]. =item * C<caller> no longer leaks memory when called from the DB package if C<@DB::args> was assigned to after the first call to C<caller>. L<Carp> was triggering this bug [perl #97010]. (5.14.2) =item * C<close> and similar filehandle functions, when called on built-in global variables (like C<$+>), used to die if the variable happened to hold the undefined value, instead of producing the usual "Use of uninitialized value" warning. =item * When autovivified file handles were introduced in Perl 5.6.0, C<readline> was inadvertently made to autovivify when called as C<readline($foo)> (but not as C<E<lt>$fooE<gt>>). It has now been fixed never to autovivify. =item * Calling an undefined anonymous subroutine (e.g., what $x holds after C<undef &{$x = sub{}}>) used to cause a "Not a CODE reference" error, which has been corrected to "Undefined subroutine called" [perl #71154]. =item * Causing C<@DB::args> to be freed between uses of C<caller> no longer results in a crash [perl #93320]. =item * C<setpgrp($foo)> used to be equivalent to C<($foo, setpgrp)>, because C<setpgrp> was ignoring its argument if there was just one. Now it is equivalent to C<setpgrp($foo,0)>. =item * C<shmread> was not setting the scalar flags correctly when reading from shared memory, causing the existing cached numeric representation in the scalar to persist [perl #98480]. =item * C<++> and C<--> now work on copies of globs, instead of dying. =item * C<splice()> doesn't warn when truncating You can now limit the size of an array using C<splice(@a,MAX_LEN)> without worrying about warnings. =item * C<< $$ >> is no longer tainted. Since this value comes directly from C<< getpid() >>, it is always safe. =item * The parser no longer leaks a filehandle if STDIN was closed before parsing started [perl #37033]. =item * C<< die; >> with a non-reference, non-string, or magical (e.g., tainted) value in $@ now properly propagates that value [perl #111654]. =back =head1 Known Problems =over 4 =item * On Solaris, we have two kinds of failure. If F<make> is Sun's F<make>, we get an error about a badly formed macro assignment in the F<Makefile>. That happens when F<./Configure> tries to make depends. F<Configure> then exits 0, but further F<make>-ing fails. If F<make> is F<gmake>, F<Configure> completes, then we get errors related to F</usr/include/stdbool.h> =item * On Win32, a number of tests hang unless STDERR is redirected. The cause of this is still under investigation. =item * When building as root with a umask that prevents files from being other-readable, F<t/op/filetest.t> will fail. This is a test bug, not a bug in perl's behavior. =item * Configuring with a recent gcc and link-time-optimization, such as C<Configure -Doptimize='-O2 -flto'> fails because the optimizer optimizes away some of Configure's tests. A workaround is to omit the C<-flto> flag when running Configure, but add it back in while actually building, something like sh Configure -Doptimize=-O2 make OPTIMIZE='-O2 -flto' =item * The following CPAN modules have test failures with perl 5.16. Patches have been submitted for all of these, so hopefully there will be new releases soon: =over =item * L<Date::Pcalc> version 6.1 =item * L<Module::CPANTS::Analyse> version 0.85 This fails due to problems in L<Module::Find> 0.10 and L<File::MMagic> 1.27. =item * L<PerlIO::Util> version 0.72 =back =back =head1 Acknowledgements Perl 5.16.0 represents approximately 12 months of development since Perl 5.14.0 and contains approximately 590,000 lines of changes across 2,500 files from 139 authors. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.16.0: Aaron Crane, Abhijit Menon-Sen, Abigail, Alan Haggai Alavi, Alberto Simões, Alexandr Ciornii, Andreas König, Andy Dougherty, Aristotle Pagaltzis, Bo Johansson, Bo Lindbergh, Breno G. de Oliveira, brian d foy, Brian Fraser, Brian Greenfield, Carl Hayter, Chas. Owens, Chia-liang Kao, Chip Salzenberg, Chris 'BinGOs' Williams, Christian Hansen, Christopher J. Madsen, chromatic, Claes Jacobsson, Claudio Ramirez, Craig A. Berry, Damian Conway, Daniel Kahn Gillmor, Darin McBride, Dave Rolsky, David Cantrell, David Golden, David Leadbeater, David Mitchell, Dee Newcum, Dennis Kaarsemaker, Dominic Hargreaves, Douglas Christopher Wilson, Eric Brine, Father Chrysostomos, Florian Ragwitz, Frederic Briere, George Greer, Gerard Goossen, Gisle Aas, H.Merijn Brand, Hojung Youn, Ian Goodacre, James E Keenan, Jan Dubois, Jerry D. Hedden, Jesse Luehrs, Jesse Vincent, Jilles Tjoelker, Jim Cromie, Jim Meyering, Joel Berger, Johan Vromans, Johannes Plunien, John Hawkinson, John P. Linderman, John Peacock, Joshua ben Jore, Juerd Waalboer, Karl Williamson, Karthik Rajagopalan, Keith Thompson, Kevin J. Woolley, Kevin Ryde, Laurent Dami, Leo Lapworth, Leon Brocard, Leon Timmermans, Louis Strous, Lukas Mai, Marc Green, Marcel Grünauer, Mark A. Stratman, Mark Dootson, Mark Jason Dominus, Martin Hasch, Matthew Horsfall, Max Maischein, Michael G Schwern, Michael Witten, Mike Sheldrake, Moritz Lenz, Nicholas Clark, Niko Tyni, Nuno Carvalho, Pau Amma, Paul Evans, Paul Green, Paul Johnson, Perlover, Peter John Acklam, Peter Martini, Peter Scott, Phil Monsen, Pino Toscano, Rafael Garcia-Suarez, Rainer Tammer, Reini Urban, Ricardo Signes, Robin Barker, Rodolfo Carvalho, Salvador Fandiño, Sam Kimbrel, Samuel Thibault, Shawn M Moore, Shigeya Suzuki, Shirakata Kentaro, Shlomi Fish, Sisyphus, Slaven Rezic, Spiros Denaxas, Steffen Müller, Steffen Schwigon, Stephen Bennett, Stephen Oberholtzer, Stevan Little, Steve Hay, Steve Peters, Thomas Sibley, Thorsten Glaser, Timothe Litt, Todd Rinaldo, Tom Christiansen, Tom Hukins, Tony Cook, Vadim Konovalov, Vincent Pit, Vladimir Timofeev, Walt Mankowski, Yves Orton, Zefram, Zsbán Ambrus, Ævar Arnfjörð Bjarmason. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at L<http://rt.perl.org/perlbug/>. There may also be information at L<http://www.perl.org/>, the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please use this address only for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl5321delta.pod 0000644 00000015533 15125556335 0007560 0 ustar 00 =encoding utf8 =head1 NAME perldelta - what is new for perl v5.32.1 =head1 DESCRIPTION This document describes differences between the 5.32.0 release and the 5.32.1 release. If you are upgrading from an earlier release such as 5.31.0, first read L<perl5320delta>, which describes differences between 5.31.0 and 5.32.0. =head1 Incompatible Changes There are no changes intentionally incompatible with Perl 5.32.0. If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Data::Dumper> has been upgraded from version 2.174 to 2.174_01. A number of memory leaks have been fixed. =item * L<DynaLoader> has been upgraded from version 1.47 to 1.47_01. =item * L<Module::CoreList> has been upgraded from version 5.20200620 to 5.20210123. =item * L<Opcode> has been upgraded from version 1.47 to 1.48. A warning has been added about evaluating untrusted code with the perl interpreter. =item * L<Safe> has been upgraded from version 2.41 to 2.41_01. A warning has been added about evaluating untrusted code with the perl interpreter. =back =head1 Documentation =head2 New Documentation =head3 L<perlgov> Documentation of the newly formed rules of governance for Perl. =head3 L<perlsecpolicy> Documentation of how the Perl security team operates and how the team evaluates new security reports. =head2 Changes to Existing Documentation We have attempted to update the documentation to reflect the changes listed in this document. If you find any we have missed, open an issue at L<https://github.com/Perl/perl5/issues>. Additionally, the following selected changes have been made: =head3 L<perlop> =over 4 =item * Document range op behaviour change. =back =head1 Diagnostics The following additions or changes have been made to diagnostic output, including warnings and fatal error messages. For the complete list of diagnostic messages, see L<perldiag>. =head2 Changes to Existing Diagnostics =over 4 =item * L<\K not permitted in lookahead/lookbehind in regex; marked by <-- HERE in mE<sol>%sE<sol>|perldiag/"\K not permitted in lookahead/lookbehind in regex; marked by <-- HERE in m/%s/"> This error was incorrectly produced in some cases involving nested lookarounds. This has been fixed. [L<GH #18123|https://github.com/Perl/perl5/issues/18123>] =back =head1 Configuration and Compilation =over 4 =item * Newer 64-bit versions of the Intel C/C++ compiler are now recognized and have the correct flags set. =item * We now trap SIGBUS when F<Configure> checks for C<va_copy>. On several systems the attempt to determine if we need C<va_copy> or similar results in a SIGBUS instead of the expected SIGSEGV, which previously caused a core dump. [L<GH #18148|https://github.com/Perl/perl5/issues/18148>] =back =head1 Testing Tests were added and changed to reflect the other additions and changes in this release. =head1 Platform Support =head2 Platform-Specific Notes =over 4 =item MacOS (Darwin) The hints file for darwin has been updated to handle future macOS versions beyond 10. Perl can now be built on macOS Big Sur. [L<GH #17946|https://github.com/Perl/perl5/issues/17946>, L<GH #18406|https://github.com/Perl/perl5/issues/18406>] =item Minix Build errors on Minix have been fixed. [L<GH #17908|https://github.com/Perl/perl5/issues/17908>] =back =head1 Selected Bug Fixes =over 4 =item * Some list assignments involving C<undef> on the left-hand side were over-optimized and produced incorrect results. [L<GH #16685|https://github.com/Perl/perl5/issues/16685>, L<GH #17816|https://github.com/Perl/perl5/issues/17816>] =item * Fixed a bug in which some regexps with recursive subpatterns matched incorrectly. [L<GH #18096|https://github.com/Perl/perl5/issues/18096>] =item * Fixed a deadlock that hung the build when Perl is compiled for debugging memory problems and has PERL_MEM_LOG enabled. [L<GH #18341|https://github.com/Perl/perl5/issues/18341>] =item * Fixed a crash in the use of chained comparison operators when run under "no warnings 'uninitialized'". [L<GH #17917|https://github.com/Perl/perl5/issues/17917>, L<GH #18380|https://github.com/Perl/perl5/issues/18380>] =item * Exceptions thrown from destructors during global destruction are no longer swallowed. [L<GH #18063|https://github.com/Perl/perl5/issues/18063>] =back =head1 Acknowledgements Perl 5.32.1 represents approximately 7 months of development since Perl 5.32.0 and contains approximately 7,000 lines of changes across 80 files from 23 authors. Excluding auto-generated files, documentation and release tools, there were approximately 1,300 lines of changes to 23 .pm, .t, .c and .h files. Perl continues to flourish into its fourth decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.32.1: Adam Hartley, Andy Dougherty, Dagfinn Ilmari Mannsåker, Dan Book, David Mitchell, Graham Knop, Graham Ollis, Hauke D, H.Merijn Brand, Hugo van der Sanden, John Lightsey, Karen Etheridge, Karl Williamson, Leon Timmermans, Max Maischein, Nicolas R., Ricardo Signes, Richard Leach, Sawyer X, Sevan Janiyan, Steve Hay, Tom Hukins, Tony Cook. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the perl bug database at L<https://github.com/Perl/perl5/issues>. There may also be information at L<http://www.perl.org/>, the Perl Home Page. If you believe you have an unreported bug, please open an issue at L<https://github.com/Perl/perl5/issues>. Be sure to trim your bug down to a tiny but sufficient test case. If the bug you are reporting has security implications which make it inappropriate to send to a public issue tracker, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 Give Thanks If you wish to thank the Perl 5 Porters for the work we had done in Perl 5, you can do so by running the C<perlthanks> program: perlthanks This will send an email to the Perl 5 Porters list with your show of thanks. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlrecharclass.pod 0000644 00000141053 15125556335 0010443 0 ustar 00 =head1 NAME X<character class> perlrecharclass - Perl Regular Expression Character Classes =head1 DESCRIPTION The top level documentation about Perl regular expressions is found in L<perlre>. This manual page discusses the syntax and use of character classes in Perl regular expressions. A character class is a way of denoting a set of characters in such a way that one character of the set is matched. It's important to remember that: matching a character class consumes exactly one character in the source string. (The source string is the string the regular expression is matched against.) There are three types of character classes in Perl regular expressions: the dot, backslash sequences, and the form enclosed in square brackets. Keep in mind, though, that often the term "character class" is used to mean just the bracketed form. Certainly, most Perl documentation does that. =head2 The dot The dot (or period), C<.> is probably the most used, and certainly the most well-known character class. By default, a dot matches any character, except for the newline. That default can be changed to add matching the newline by using the I<single line> modifier: for the entire regular expression with the C</s> modifier, or locally with C<(?s)> (and even globally within the scope of L<C<use re '/s'>|re/'E<sol>flags' mode>). (The C<L</\N>> backslash sequence, described below, matches any character except newline without regard to the I<single line> modifier.) Here are some examples: "a" =~ /./ # Match "." =~ /./ # Match "" =~ /./ # No match (dot has to match a character) "\n" =~ /./ # No match (dot does not match a newline) "\n" =~ /./s # Match (global 'single line' modifier) "\n" =~ /(?s:.)/ # Match (local 'single line' modifier) "ab" =~ /^.$/ # No match (dot matches one character) =head2 Backslash sequences X<\w> X<\W> X<\s> X<\S> X<\d> X<\D> X<\p> X<\P> X<\N> X<\v> X<\V> X<\h> X<\H> X<word> X<whitespace> A backslash sequence is a sequence of characters, the first one of which is a backslash. Perl ascribes special meaning to many such sequences, and some of these are character classes. That is, they match a single character each, provided that the character belongs to the specific set of characters defined by the sequence. Here's a list of the backslash sequences that are character classes. They are discussed in more detail below. (For the backslash sequences that aren't character classes, see L<perlrebackslash>.) \d Match a decimal digit character. \D Match a non-decimal-digit character. \w Match a "word" character. \W Match a non-"word" character. \s Match a whitespace character. \S Match a non-whitespace character. \h Match a horizontal whitespace character. \H Match a character that isn't horizontal whitespace. \v Match a vertical whitespace character. \V Match a character that isn't vertical whitespace. \N Match a character that isn't a newline. \pP, \p{Prop} Match a character that has the given Unicode property. \PP, \P{Prop} Match a character that doesn't have the Unicode property =head3 \N C<\N>, available starting in v5.12, like the dot, matches any character that is not a newline. The difference is that C<\N> is not influenced by the I<single line> regular expression modifier (see L</The dot> above). Note that the form C<\N{...}> may mean something completely different. When the C<{...}> is a L<quantifier|perlre/Quantifiers>, it means to match a non-newline character that many times. For example, C<\N{3}> means to match 3 non-newlines; C<\N{5,}> means to match 5 or more non-newlines. But if C<{...}> is not a legal quantifier, it is presumed to be a named character. See L<charnames> for those. For example, none of C<\N{COLON}>, C<\N{4F}>, and C<\N{F4}> contain legal quantifiers, so Perl will try to find characters whose names are respectively C<COLON>, C<4F>, and C<F4>. =head3 Digits C<\d> matches a single character considered to be a decimal I<digit>. If the C</a> regular expression modifier is in effect, it matches [0-9]. Otherwise, it matches anything that is matched by C<\p{Digit}>, which includes [0-9]. (An unlikely possible exception is that under locale matching rules, the current locale might not have C<[0-9]> matched by C<\d>, and/or might match other characters whose code point is less than 256. The only such locale definitions that are legal would be to match C<[0-9]> plus another set of 10 consecutive digit characters; anything else would be in violation of the C language standard, but Perl doesn't currently assume anything in regard to this.) What this means is that unless the C</a> modifier is in effect C<\d> not only matches the digits '0' - '9', but also Arabic, Devanagari, and digits from other languages. This may cause some confusion, and some security issues. Some digits that C<\d> matches look like some of the [0-9] ones, but have different values. For example, BENGALI DIGIT FOUR (U+09EA) looks very much like an ASCII DIGIT EIGHT (U+0038), and LEPCHA DIGIT SIX (U+1C46) looks very much like an ASCII DIGIT FIVE (U+0035). An application that is expecting only the ASCII digits might be misled, or if the match is C<\d+>, the matched string might contain a mixture of digits from different writing systems that look like they signify a number different than they actually do. L<Unicode::UCD/num()> can be used to safely calculate the value, returning C<undef> if the input string contains such a mixture. Otherwise, for example, a displayed price might be deliberately different than it appears. What C<\p{Digit}> means (and hence C<\d> except under the C</a> modifier) is C<\p{General_Category=Decimal_Number}>, or synonymously, C<\p{General_Category=Digit}>. Starting with Unicode version 4.1, this is the same set of characters matched by C<\p{Numeric_Type=Decimal}>. But Unicode also has a different property with a similar name, C<\p{Numeric_Type=Digit}>, which matches a completely different set of characters. These characters are things such as C<CIRCLED DIGIT ONE> or subscripts, or are from writing systems that lack all ten digits. The design intent is for C<\d> to exactly match the set of characters that can safely be used with "normal" big-endian positional decimal syntax, where, for example 123 means one 'hundred', plus two 'tens', plus three 'ones'. This positional notation does not necessarily apply to characters that match the other type of "digit", C<\p{Numeric_Type=Digit}>, and so C<\d> doesn't match them. The Tamil digits (U+0BE6 - U+0BEF) can also legally be used in old-style Tamil numbers in which they would appear no more than one in a row, separated by characters that mean "times 10", "times 100", etc. (See L<https://www.unicode.org/notes/tn21>.) Any character not matched by C<\d> is matched by C<\D>. =head3 Word characters A C<\w> matches a single alphanumeric character (an alphabetic character, or a decimal digit); or a connecting punctuation character, such as an underscore ("_"); or a "mark" character (like some sort of accent) that attaches to one of those. It does not match a whole word. To match a whole word, use C<\w+>. This isn't the same thing as matching an English word, but in the ASCII range it is the same as a string of Perl-identifier characters. =over =item If the C</a> modifier is in effect ... C<\w> matches the 63 characters [a-zA-Z0-9_]. =item otherwise ... =over =item For code points above 255 ... C<\w> matches the same as C<\p{Word}> matches in this range. That is, it matches Thai letters, Greek letters, etc. This includes connector punctuation (like the underscore) which connect two words together, or diacritics, such as a C<COMBINING TILDE> and the modifier letters, which are generally used to add auxiliary markings to letters. =item For code points below 256 ... =over =item if locale rules are in effect ... C<\w> matches the platform's native underscore character plus whatever the locale considers to be alphanumeric. =item if, instead, Unicode rules are in effect ... C<\w> matches exactly what C<\p{Word}> matches. =item otherwise ... C<\w> matches [a-zA-Z0-9_]. =back =back =back Which rules apply are determined as described in L<perlre/Which character set modifier is in effect?>. There are a number of security issues with the full Unicode list of word characters. See L<http://unicode.org/reports/tr36>. Also, for a somewhat finer-grained set of characters that are in programming language identifiers beyond the ASCII range, you may wish to instead use the more customized L</Unicode Properties>, C<\p{ID_Start}>, C<\p{ID_Continue}>, C<\p{XID_Start}>, and C<\p{XID_Continue}>. See L<http://unicode.org/reports/tr31>. Any character not matched by C<\w> is matched by C<\W>. =head3 Whitespace C<\s> matches any single character considered whitespace. =over =item If the C</a> modifier is in effect ... In all Perl versions, C<\s> matches the 5 characters [\t\n\f\r ]; that is, the horizontal tab, the newline, the form feed, the carriage return, and the space. Starting in Perl v5.18, it also matches the vertical tab, C<\cK>. See note C<[1]> below for a discussion of this. =item otherwise ... =over =item For code points above 255 ... C<\s> matches exactly the code points above 255 shown with an "s" column in the table below. =item For code points below 256 ... =over =item if locale rules are in effect ... C<\s> matches whatever the locale considers to be whitespace. =item if, instead, Unicode rules are in effect ... C<\s> matches exactly the characters shown with an "s" column in the table below. =item otherwise ... C<\s> matches [\t\n\f\r ] and, starting in Perl v5.18, the vertical tab, C<\cK>. (See note C<[1]> below for a discussion of this.) Note that this list doesn't include the non-breaking space. =back =back =back Which rules apply are determined as described in L<perlre/Which character set modifier is in effect?>. Any character not matched by C<\s> is matched by C<\S>. C<\h> matches any character considered horizontal whitespace; this includes the platform's space and tab characters and several others listed in the table below. C<\H> matches any character not considered horizontal whitespace. They use the platform's native character set, and do not consider any locale that may otherwise be in use. C<\v> matches any character considered vertical whitespace; this includes the platform's carriage return and line feed characters (newline) plus several other characters, all listed in the table below. C<\V> matches any character not considered vertical whitespace. They use the platform's native character set, and do not consider any locale that may otherwise be in use. C<\R> matches anything that can be considered a newline under Unicode rules. It can match a multi-character sequence. It cannot be used inside a bracketed character class; use C<\v> instead (vertical whitespace). It uses the platform's native character set, and does not consider any locale that may otherwise be in use. Details are discussed in L<perlrebackslash>. Note that unlike C<\s> (and C<\d> and C<\w>), C<\h> and C<\v> always match the same characters, without regard to other factors, such as the active locale or whether the source string is in UTF-8 format. One might think that C<\s> is equivalent to C<[\h\v]>. This is indeed true starting in Perl v5.18, but prior to that, the sole difference was that the vertical tab (C<"\cK">) was not matched by C<\s>. The following table is a complete listing of characters matched by C<\s>, C<\h> and C<\v> as of Unicode 6.3. The first column gives the Unicode code point of the character (in hex format), the second column gives the (Unicode) name. The third column indicates by which class(es) the character is matched (assuming no locale is in effect that changes the C<\s> matching). 0x0009 CHARACTER TABULATION h s 0x000a LINE FEED (LF) vs 0x000b LINE TABULATION vs [1] 0x000c FORM FEED (FF) vs 0x000d CARRIAGE RETURN (CR) vs 0x0020 SPACE h s 0x0085 NEXT LINE (NEL) vs [2] 0x00a0 NO-BREAK SPACE h s [2] 0x1680 OGHAM SPACE MARK h s 0x2000 EN QUAD h s 0x2001 EM QUAD h s 0x2002 EN SPACE h s 0x2003 EM SPACE h s 0x2004 THREE-PER-EM SPACE h s 0x2005 FOUR-PER-EM SPACE h s 0x2006 SIX-PER-EM SPACE h s 0x2007 FIGURE SPACE h s 0x2008 PUNCTUATION SPACE h s 0x2009 THIN SPACE h s 0x200a HAIR SPACE h s 0x2028 LINE SEPARATOR vs 0x2029 PARAGRAPH SEPARATOR vs 0x202f NARROW NO-BREAK SPACE h s 0x205f MEDIUM MATHEMATICAL SPACE h s 0x3000 IDEOGRAPHIC SPACE h s =over 4 =item [1] Prior to Perl v5.18, C<\s> did not match the vertical tab. C<[^\S\cK]> (obscurely) matches what C<\s> traditionally did. =item [2] NEXT LINE and NO-BREAK SPACE may or may not match C<\s> depending on the rules in effect. See L<the beginning of this section|/Whitespace>. =back =head3 Unicode Properties C<\pP> and C<\p{Prop}> are character classes to match characters that fit given Unicode properties. One letter property names can be used in the C<\pP> form, with the property name following the C<\p>, otherwise, braces are required. When using braces, there is a single form, which is just the property name enclosed in the braces, and a compound form which looks like C<\p{name=value}>, which means to match if the property "name" for the character has that particular "value". For instance, a match for a number can be written as C</\pN/> or as C</\p{Number}/>, or as C</\p{Number=True}/>. Lowercase letters are matched by the property I<Lowercase_Letter> which has the short form I<Ll>. They need the braces, so are written as C</\p{Ll}/> or C</\p{Lowercase_Letter}/>, or C</\p{General_Category=Lowercase_Letter}/> (the underscores are optional). C</\pLl/> is valid, but means something different. It matches a two character string: a letter (Unicode property C<\pL>), followed by a lowercase C<l>. What a Unicode property matches is never subject to locale rules, and if locale rules are not otherwise in effect, the use of a Unicode property will force the regular expression into using Unicode rules, if it isn't already. Note that almost all properties are immune to case-insensitive matching. That is, adding a C</i> regular expression modifier does not change what they match. But there are two sets that are affected. The first set is C<Uppercase_Letter>, C<Lowercase_Letter>, and C<Titlecase_Letter>, all of which match C<Cased_Letter> under C</i> matching. The second set is C<Uppercase>, C<Lowercase>, and C<Titlecase>, all of which match C<Cased> under C</i> matching. (The difference between these sets is that some things, such as Roman numerals, come in both upper and lower case, so they are C<Cased>, but aren't considered to be letters, so they aren't C<Cased_Letter>s. They're actually C<Letter_Number>s.) This set also includes its subsets C<PosixUpper> and C<PosixLower>, both of which under C</i> match C<PosixAlpha>. For more details on Unicode properties, see L<perlunicode/Unicode Character Properties>; for a complete list of possible properties, see L<perluniprops/Properties accessible through \p{} and \P{}>, which notes all forms that have C</i> differences. It is also possible to define your own properties. This is discussed in L<perlunicode/User-Defined Character Properties>. Unicode properties are defined (surprise!) only on Unicode code points. Starting in v5.20, when matching against C<\p> and C<\P>, Perl treats non-Unicode code points (those above the legal Unicode maximum of 0x10FFFF) as if they were typical unassigned Unicode code points. Prior to v5.20, Perl raised a warning and made all matches fail on non-Unicode code points. This could be somewhat surprising: chr(0x110000) =~ \p{ASCII_Hex_Digit=True} # Fails on Perls < v5.20. chr(0x110000) =~ \p{ASCII_Hex_Digit=False} # Also fails on Perls # < v5.20 Even though these two matches might be thought of as complements, until v5.20 they were so only on Unicode code points. Starting in perl v5.30, wildcards are allowed in Unicode property values. See L<perlunicode/Wildcards in Property Values>. =head4 Examples "a" =~ /\w/ # Match, "a" is a 'word' character. "7" =~ /\w/ # Match, "7" is a 'word' character as well. "a" =~ /\d/ # No match, "a" isn't a digit. "7" =~ /\d/ # Match, "7" is a digit. " " =~ /\s/ # Match, a space is whitespace. "a" =~ /\D/ # Match, "a" is a non-digit. "7" =~ /\D/ # No match, "7" is not a non-digit. " " =~ /\S/ # No match, a space is not non-whitespace. " " =~ /\h/ # Match, space is horizontal whitespace. " " =~ /\v/ # No match, space is not vertical whitespace. "\r" =~ /\v/ # Match, a return is vertical whitespace. "a" =~ /\pL/ # Match, "a" is a letter. "a" =~ /\p{Lu}/ # No match, /\p{Lu}/ matches upper case letters. "\x{0e0b}" =~ /\p{Thai}/ # Match, \x{0e0b} is the character # 'THAI CHARACTER SO SO', and that's in # Thai Unicode class. "a" =~ /\P{Lao}/ # Match, as "a" is not a Laotian character. It is worth emphasizing that C<\d>, C<\w>, etc, match single characters, not complete numbers or words. To match a number (that consists of digits), use C<\d+>; to match a word, use C<\w+>. But be aware of the security considerations in doing so, as mentioned above. =head2 Bracketed Character Classes The third form of character class you can use in Perl regular expressions is the bracketed character class. In its simplest form, it lists the characters that may be matched, surrounded by square brackets, like this: C<[aeiou]>. This matches one of C<a>, C<e>, C<i>, C<o> or C<u>. Like the other character classes, exactly one character is matched.* To match a longer string consisting of characters mentioned in the character class, follow the character class with a L<quantifier|perlre/Quantifiers>. For instance, C<[aeiou]+> matches one or more lowercase English vowels. Repeating a character in a character class has no effect; it's considered to be in the set only once. Examples: "e" =~ /[aeiou]/ # Match, as "e" is listed in the class. "p" =~ /[aeiou]/ # No match, "p" is not listed in the class. "ae" =~ /^[aeiou]$/ # No match, a character class only matches # a single character. "ae" =~ /^[aeiou]+$/ # Match, due to the quantifier. ------- * There are two exceptions to a bracketed character class matching a single character only. Each requires special handling by Perl to make things work: =over =item * When the class is to match caselessly under C</i> matching rules, and a character that is explicitly mentioned inside the class matches a multiple-character sequence caselessly under Unicode rules, the class will also match that sequence. For example, Unicode says that the letter C<LATIN SMALL LETTER SHARP S> should match the sequence C<ss> under C</i> rules. Thus, 'ss' =~ /\A\N{LATIN SMALL LETTER SHARP S}\z/i # Matches 'ss' =~ /\A[aeioust\N{LATIN SMALL LETTER SHARP S}]\z/i # Matches For this to happen, the class must not be inverted (see L</Negation>) and the character must be explicitly specified, and not be part of a multi-character range (not even as one of its endpoints). (L</Character Ranges> will be explained shortly.) Therefore, 'ss' =~ /\A[\0-\x{ff}]\z/ui # Doesn't match 'ss' =~ /\A[\0-\N{LATIN SMALL LETTER SHARP S}]\z/ui # No match 'ss' =~ /\A[\xDF-\xDF]\z/ui # Matches on ASCII platforms, since # \xDF is LATIN SMALL LETTER SHARP S, # and the range is just a single # element Note that it isn't a good idea to specify these types of ranges anyway. =item * Some names known to C<\N{...}> refer to a sequence of multiple characters, instead of the usual single character. When one of these is included in the class, the entire sequence is matched. For example, "\N{TAMIL LETTER KA}\N{TAMIL VOWEL SIGN AU}" =~ / ^ [\N{TAMIL SYLLABLE KAU}] $ /x; matches, because C<\N{TAMIL SYLLABLE KAU}> is a named sequence consisting of the two characters matched against. Like the other instance where a bracketed class can match multiple characters, and for similar reasons, the class must not be inverted, and the named sequence may not appear in a range, even one where it is both endpoints. If these happen, it is a fatal error if the character class is within the scope of L<C<use re 'strict>|re/'strict' mode>, or within an extended L<C<(?[...])>|/Extended Bracketed Character Classes> class; otherwise only the first code point is used (with a C<regexp>-type warning raised). =back =head3 Special Characters Inside a Bracketed Character Class Most characters that are meta characters in regular expressions (that is, characters that carry a special meaning like C<.>, C<*>, or C<(>) lose their special meaning and can be used inside a character class without the need to escape them. For instance, C<[()]> matches either an opening parenthesis, or a closing parenthesis, and the parens inside the character class don't group or capture. Be aware that, unless the pattern is evaluated in single-quotish context, variable interpolation will take place before the bracketed class is parsed: $, = "\t| "; $a =~ m'[$,]'; # single-quotish: matches '$' or ',' $a =~ q{[$,]}' # same $a =~ m/[$,]/; # double-quotish: matches "\t", "|", or " " Characters that may carry a special meaning inside a character class are: C<\>, C<^>, C<->, C<[> and C<]>, and are discussed below. They can be escaped with a backslash, although this is sometimes not needed, in which case the backslash may be omitted. The sequence C<\b> is special inside a bracketed character class. While outside the character class, C<\b> is an assertion indicating a point that does not have either two word characters or two non-word characters on either side, inside a bracketed character class, C<\b> matches a backspace character. The sequences C<\a>, C<\c>, C<\e>, C<\f>, C<\n>, C<\N{I<NAME>}>, C<\N{U+I<hex char>}>, C<\r>, C<\t>, and C<\x> are also special and have the same meanings as they do outside a bracketed character class. Also, a backslash followed by two or three octal digits is considered an octal number. A C<[> is not special inside a character class, unless it's the start of a POSIX character class (see L</POSIX Character Classes> below). It normally does not need escaping. A C<]> is normally either the end of a POSIX character class (see L</POSIX Character Classes> below), or it signals the end of the bracketed character class. If you want to include a C<]> in the set of characters, you must generally escape it. However, if the C<]> is the I<first> (or the second if the first character is a caret) character of a bracketed character class, it does not denote the end of the class (as you cannot have an empty class) and is considered part of the set of characters that can be matched without escaping. Examples: "+" =~ /[+?*]/ # Match, "+" in a character class is not special. "\cH" =~ /[\b]/ # Match, \b inside in a character class # is equivalent to a backspace. "]" =~ /[][]/ # Match, as the character class contains # both [ and ]. "[]" =~ /[[]]/ # Match, the pattern contains a character class # containing just [, and the character class is # followed by a ]. =head3 Bracketed Character Classes and the C</xx> pattern modifier Normally SPACE and TAB characters have no special meaning inside a bracketed character class; they are just added to the list of characters matched by the class. But if the L<C</xx>|perlre/E<sol>x and E<sol>xx> pattern modifier is in effect, they are generally ignored and can be added to improve readability. They can't be added in the middle of a single construct: / [ \x{10 FFFF} ] /xx # WRONG! The SPACE in the middle of the hex constant is illegal. To specify a literal SPACE character, you can escape it with a backslash, like: /[ a e i o u \ ]/xx This matches the English vowels plus the SPACE character. For clarity, you should already have been using C<\t> to specify a literal tab, and C<\t> is unaffected by C</xx>. =head3 Character Ranges It is not uncommon to want to match a range of characters. Luckily, instead of listing all characters in the range, one may use the hyphen (C<->). If inside a bracketed character class you have two characters separated by a hyphen, it's treated as if all characters between the two were in the class. For instance, C<[0-9]> matches any ASCII digit, and C<[a-m]> matches any lowercase letter from the first half of the ASCII alphabet. Note that the two characters on either side of the hyphen are not necessarily both letters or both digits. Any character is possible, although not advisable. C<['-?]> contains a range of characters, but most people will not know which characters that means. Furthermore, such ranges may lead to portability problems if the code has to run on a platform that uses a different character set, such as EBCDIC. If a hyphen in a character class cannot syntactically be part of a range, for instance because it is the first or the last character of the character class, or if it immediately follows a range, the hyphen isn't special, and so is considered a character to be matched literally. If you want a hyphen in your set of characters to be matched and its position in the class is such that it could be considered part of a range, you must escape that hyphen with a backslash. Examples: [a-z] # Matches a character that is a lower case ASCII letter. [a-fz] # Matches any letter between 'a' and 'f' (inclusive) or # the letter 'z'. [-z] # Matches either a hyphen ('-') or the letter 'z'. [a-f-m] # Matches any letter between 'a' and 'f' (inclusive), the # hyphen ('-'), or the letter 'm'. ['-?] # Matches any of the characters '()*+,-./0123456789:;<=>? # (But not on an EBCDIC platform). [\N{APOSTROPHE}-\N{QUESTION MARK}] # Matches any of the characters '()*+,-./0123456789:;<=>? # even on an EBCDIC platform. [\N{U+27}-\N{U+3F}] # Same. (U+27 is "'", and U+3F is "?") As the final two examples above show, you can achieve portability to non-ASCII platforms by using the C<\N{...}> form for the range endpoints. These indicate that the specified range is to be interpreted using Unicode values, so C<[\N{U+27}-\N{U+3F}]> means to match C<\N{U+27}>, C<\N{U+28}>, C<\N{U+29}>, ..., C<\N{U+3D}>, C<\N{U+3E}>, and C<\N{U+3F}>, whatever the native code point versions for those are. These are called "Unicode" ranges. If either end is of the C<\N{...}> form, the range is considered Unicode. A C<regexp> warning is raised under C<S<"use re 'strict'">> if the other endpoint is specified non-portably: [\N{U+00}-\x09] # Warning under re 'strict'; \x09 is non-portable [\N{U+00}-\t] # No warning; Both of the above match the characters C<\N{U+00}> C<\N{U+01}>, ... C<\N{U+08}>, C<\N{U+09}>, but the C<\x09> looks like it could be a mistake so the warning is raised (under C<re 'strict'>) for it. Perl also guarantees that the ranges C<A-Z>, C<a-z>, C<0-9>, and any subranges of these match what an English-only speaker would expect them to match on any platform. That is, C<[A-Z]> matches the 26 ASCII uppercase letters; C<[a-z]> matches the 26 lowercase letters; and C<[0-9]> matches the 10 digits. Subranges, like C<[h-k]>, match correspondingly, in this case just the four letters C<"h">, C<"i">, C<"j">, and C<"k">. This is the natural behavior on ASCII platforms where the code points (ordinal values) for C<"h"> through C<"k"> are consecutive integers (0x68 through 0x6B). But special handling to achieve this may be needed on platforms with a non-ASCII native character set. For example, on EBCDIC platforms, the code point for C<"h"> is 0x88, C<"i"> is 0x89, C<"j"> is 0x91, and C<"k"> is 0x92. Perl specially treats C<[h-k]> to exclude the seven code points in the gap: 0x8A through 0x90. This special handling is only invoked when the range is a subrange of one of the ASCII uppercase, lowercase, and digit ranges, AND each end of the range is expressed either as a literal, like C<"A">, or as a named character (C<\N{...}>, including the C<\N{U+...> form). EBCDIC Examples: [i-j] # Matches either "i" or "j" [i-\N{LATIN SMALL LETTER J}] # Same [i-\N{U+6A}] # Same [\N{U+69}-\N{U+6A}] # Same [\x{89}-\x{91}] # Matches 0x89 ("i"), 0x8A .. 0x90, 0x91 ("j") [i-\x{91}] # Same [\x{89}-j] # Same [i-J] # Matches, 0x89 ("i") .. 0xC1 ("J"); special # handling doesn't apply because range is mixed # case =head3 Negation It is also possible to instead list the characters you do not want to match. You can do so by using a caret (C<^>) as the first character in the character class. For instance, C<[^a-z]> matches any character that is not a lowercase ASCII letter, which therefore includes more than a million Unicode code points. The class is said to be "negated" or "inverted". This syntax make the caret a special character inside a bracketed character class, but only if it is the first character of the class. So if you want the caret as one of the characters to match, either escape the caret or else don't list it first. In inverted bracketed character classes, Perl ignores the Unicode rules that normally say that named sequence, and certain characters should match a sequence of multiple characters use under caseless C</i> matching. Following those rules could lead to highly confusing situations: "ss" =~ /^[^\xDF]+$/ui; # Matches! This should match any sequences of characters that aren't C<\xDF> nor what C<\xDF> matches under C</i>. C<"s"> isn't C<\xDF>, but Unicode says that C<"ss"> is what C<\xDF> matches under C</i>. So which one "wins"? Do you fail the match because the string has C<ss> or accept it because it has an C<s> followed by another C<s>? Perl has chosen the latter. (See note in L</Bracketed Character Classes> above.) Examples: "e" =~ /[^aeiou]/ # No match, the 'e' is listed. "x" =~ /[^aeiou]/ # Match, as 'x' isn't a lowercase vowel. "^" =~ /[^^]/ # No match, matches anything that isn't a caret. "^" =~ /[x^]/ # Match, caret is not special here. =head3 Backslash Sequences You can put any backslash sequence character class (with the exception of C<\N> and C<\R>) inside a bracketed character class, and it will act just as if you had put all characters matched by the backslash sequence inside the character class. For instance, C<[a-f\d]> matches any decimal digit, or any of the lowercase letters between 'a' and 'f' inclusive. C<\N> within a bracketed character class must be of the forms C<\N{I<name>}> or C<\N{U+I<hex char>}>, and NOT be the form that matches non-newlines, for the same reason that a dot C<.> inside a bracketed character class loses its special meaning: it matches nearly anything, which generally isn't what you want to happen. Examples: /[\p{Thai}\d]/ # Matches a character that is either a Thai # character, or a digit. /[^\p{Arabic}()]/ # Matches a character that is neither an Arabic # character, nor a parenthesis. Backslash sequence character classes cannot form one of the endpoints of a range. Thus, you can't say: /[\p{Thai}-\d]/ # Wrong! =head3 POSIX Character Classes X<character class> X<\p> X<\p{}> X<alpha> X<alnum> X<ascii> X<blank> X<cntrl> X<digit> X<graph> X<lower> X<print> X<punct> X<space> X<upper> X<word> X<xdigit> POSIX character classes have the form C<[:class:]>, where I<class> is the name, and the C<[:> and C<:]> delimiters. POSIX character classes only appear I<inside> bracketed character classes, and are a convenient and descriptive way of listing a group of characters. Be careful about the syntax, # Correct: $string =~ /[[:alpha:]]/ # Incorrect (will warn): $string =~ /[:alpha:]/ The latter pattern would be a character class consisting of a colon, and the letters C<a>, C<l>, C<p> and C<h>. POSIX character classes can be part of a larger bracketed character class. For example, [01[:alpha:]%] is valid and matches '0', '1', any alphabetic character, and the percent sign. Perl recognizes the following POSIX character classes: alpha Any alphabetical character (e.g., [A-Za-z]). alnum Any alphanumeric character (e.g., [A-Za-z0-9]). ascii Any character in the ASCII character set. blank A GNU extension, equal to a space or a horizontal tab ("\t"). cntrl Any control character. See Note [2] below. digit Any decimal digit (e.g., [0-9]), equivalent to "\d". graph Any printable character, excluding a space. See Note [3] below. lower Any lowercase character (e.g., [a-z]). print Any printable character, including a space. See Note [4] below. punct Any graphical character excluding "word" characters. Note [5]. space Any whitespace character. "\s" including the vertical tab ("\cK"). upper Any uppercase character (e.g., [A-Z]). word A Perl extension (e.g., [A-Za-z0-9_]), equivalent to "\w". xdigit Any hexadecimal digit (e.g., [0-9a-fA-F]). Note [7]. Like the L<Unicode properties|/Unicode Properties>, most of the POSIX properties match the same regardless of whether case-insensitive (C</i>) matching is in effect or not. The two exceptions are C<[:upper:]> and C<[:lower:]>. Under C</i>, they each match the union of C<[:upper:]> and C<[:lower:]>. Most POSIX character classes have two Unicode-style C<\p> property counterparts. (They are not official Unicode properties, but Perl extensions derived from official Unicode properties.) The table below shows the relation between POSIX character classes and these counterparts. One counterpart, in the column labelled "ASCII-range Unicode" in the table, matches only characters in the ASCII character set. The other counterpart, in the column labelled "Full-range Unicode", matches any appropriate characters in the full Unicode character set. For example, C<\p{Alpha}> matches not just the ASCII alphabetic characters, but any character in the entire Unicode character set considered alphabetic. An entry in the column labelled "backslash sequence" is a (short) equivalent. [[:...:]] ASCII-range Full-range backslash Note Unicode Unicode sequence ----------------------------------------------------- alpha \p{PosixAlpha} \p{XPosixAlpha} alnum \p{PosixAlnum} \p{XPosixAlnum} ascii \p{ASCII} blank \p{PosixBlank} \p{XPosixBlank} \h [1] or \p{HorizSpace} [1] cntrl \p{PosixCntrl} \p{XPosixCntrl} [2] digit \p{PosixDigit} \p{XPosixDigit} \d graph \p{PosixGraph} \p{XPosixGraph} [3] lower \p{PosixLower} \p{XPosixLower} print \p{PosixPrint} \p{XPosixPrint} [4] punct \p{PosixPunct} \p{XPosixPunct} [5] \p{PerlSpace} \p{XPerlSpace} \s [6] space \p{PosixSpace} \p{XPosixSpace} [6] upper \p{PosixUpper} \p{XPosixUpper} word \p{PosixWord} \p{XPosixWord} \w xdigit \p{PosixXDigit} \p{XPosixXDigit} [7] =over 4 =item [1] C<\p{Blank}> and C<\p{HorizSpace}> are synonyms. =item [2] Control characters don't produce output as such, but instead usually control the terminal somehow: for example, newline and backspace are control characters. On ASCII platforms, in the ASCII range, characters whose code points are between 0 and 31 inclusive, plus 127 (C<DEL>) are control characters; on EBCDIC platforms, their counterparts are control characters. =item [3] Any character that is I<graphical>, that is, visible. This class consists of all alphanumeric characters and all punctuation characters. =item [4] All printable characters, which is the set of all graphical characters plus those whitespace characters which are not also controls. =item [5] C<\p{PosixPunct}> and C<[[:punct:]]> in the ASCII range match all non-controls, non-alphanumeric, non-space characters: C<[-!"#$%&'()*+,./:;<=E<gt>?@[\\\]^_`{|}~]> (although if a locale is in effect, it could alter the behavior of C<[[:punct:]]>). The similarly named property, C<\p{Punct}>, matches a somewhat different set in the ASCII range, namely C<[-!"#%&'()*,./:;?@[\\\]_{}]>. That is, it is missing the nine characters C<[$+E<lt>=E<gt>^`|~]>. This is because Unicode splits what POSIX considers to be punctuation into two categories, Punctuation and Symbols. C<\p{XPosixPunct}> and (under Unicode rules) C<[[:punct:]]>, match what C<\p{PosixPunct}> matches in the ASCII range, plus what C<\p{Punct}> matches. This is different than strictly matching according to C<\p{Punct}>. Another way to say it is that if Unicode rules are in effect, C<[[:punct:]]> matches all characters that Unicode considers punctuation, plus all ASCII-range characters that Unicode considers symbols. =item [6] C<\p{XPerlSpace}> and C<\p{Space}> match identically starting with Perl v5.18. In earlier versions, these differ only in that in non-locale matching, C<\p{XPerlSpace}> did not match the vertical tab, C<\cK>. Same for the two ASCII-only range forms. =item [7] Unlike C<[[:digit:]]> which matches digits in many writing systems, such as Thai and Devanagari, there are currently only two sets of hexadecimal digits, and it is unlikely that more will be added. This is because you not only need the ten digits, but also the six C<[A-F]> (and C<[a-f]>) to correspond. That means only the Latin script is suitable for these, and Unicode has only two sets of these, the familiar ASCII set, and the fullwidth forms starting at U+FF10 (FULLWIDTH DIGIT ZERO). =back There are various other synonyms that can be used besides the names listed in the table. For example, C<\p{XPosixAlpha}> can be written as C<\p{Alpha}>. All are listed in L<perluniprops/Properties accessible through \p{} and \P{}>. Both the C<\p> counterparts always assume Unicode rules are in effect. On ASCII platforms, this means they assume that the code points from 128 to 255 are Latin-1, and that means that using them under locale rules is unwise unless the locale is guaranteed to be Latin-1 or UTF-8. In contrast, the POSIX character classes are useful under locale rules. They are affected by the actual rules in effect, as follows: =over =item If the C</a> modifier, is in effect ... Each of the POSIX classes matches exactly the same as their ASCII-range counterparts. =item otherwise ... =over =item For code points above 255 ... The POSIX class matches the same as its Full-range counterpart. =item For code points below 256 ... =over =item if locale rules are in effect ... The POSIX class matches according to the locale, except: =over =item C<word> also includes the platform's native underscore character, no matter what the locale is. =item C<ascii> on platforms that don't have the POSIX C<ascii> extension, this matches just the platform's native ASCII-range characters. =item C<blank> on platforms that don't have the POSIX C<blank> extension, this matches just the platform's native tab and space characters. =back =item if, instead, Unicode rules are in effect ... The POSIX class matches the same as the Full-range counterpart. =item otherwise ... The POSIX class matches the same as the ASCII range counterpart. =back =back =back Which rules apply are determined as described in L<perlre/Which character set modifier is in effect?>. =head4 Negation of POSIX character classes X<character class, negation> A Perl extension to the POSIX character class is the ability to negate it. This is done by prefixing the class name with a caret (C<^>). Some examples: POSIX ASCII-range Full-range backslash Unicode Unicode sequence ----------------------------------------------------- [[:^digit:]] \P{PosixDigit} \P{XPosixDigit} \D [[:^space:]] \P{PosixSpace} \P{XPosixSpace} \P{PerlSpace} \P{XPerlSpace} \S [[:^word:]] \P{PerlWord} \P{XPosixWord} \W The backslash sequence can mean either ASCII- or Full-range Unicode, depending on various factors as described in L<perlre/Which character set modifier is in effect?>. =head4 [= =] and [. .] Perl recognizes the POSIX character classes C<[=class=]> and C<[.class.]>, but does not (yet?) support them. Any attempt to use either construct raises an exception. =head4 Examples /[[:digit:]]/ # Matches a character that is a digit. /[01[:lower:]]/ # Matches a character that is either a # lowercase letter, or '0' or '1'. /[[:digit:][:^xdigit:]]/ # Matches a character that can be anything # except the letters 'a' to 'f' and 'A' to # 'F'. This is because the main character # class is composed of two POSIX character # classes that are ORed together, one that # matches any digit, and the other that # matches anything that isn't a hex digit. # The OR adds the digits, leaving only the # letters 'a' to 'f' and 'A' to 'F' excluded. =head3 Extended Bracketed Character Classes X<character class> X<set operations> This is a fancy bracketed character class that can be used for more readable and less error-prone classes, and to perform set operations, such as intersection. An example is /(?[ \p{Thai} & \p{Digit} ])/ This will match all the digit characters that are in the Thai script. This is an experimental feature available starting in 5.18, and is subject to change as we gain field experience with it. Any attempt to use it will raise a warning, unless disabled via no warnings "experimental::regex_sets"; Comments on this feature are welcome; send email to C<perl5-porters@perl.org>. The rules used by L<C<use re 'strict>|re/'strict' mode> apply to this construct. We can extend the example above: /(?[ ( \p{Thai} + \p{Lao} ) & \p{Digit} ])/ This matches digits that are in either the Thai or Laotian scripts. Notice the white space in these examples. This construct always has the C<E<sol>xx> modifier turned on within it. The available binary operators are: & intersection + union | another name for '+', hence means union - subtraction (the result matches the set consisting of those code points matched by the first operand, excluding any that are also matched by the second operand) ^ symmetric difference (the union minus the intersection). This is like an exclusive or, in that the result is the set of code points that are matched by either, but not both, of the operands. There is one unary operator: ! complement All the binary operators left associate; C<"&"> is higher precedence than the others, which all have equal precedence. The unary operator right associates, and has highest precedence. Thus this follows the normal Perl precedence rules for logical operators. Use parentheses to override the default precedence and associativity. The main restriction is that everything is a metacharacter. Thus, you cannot refer to single characters by doing something like this: /(?[ a + b ])/ # Syntax error! The easiest way to specify an individual typable character is to enclose it in brackets: /(?[ [a] + [b] ])/ (This is the same thing as C<[ab]>.) You could also have said the equivalent: /(?[[ a b ]])/ (You can, of course, specify single characters by using, C<\x{...}>, C<\N{...}>, etc.) This last example shows the use of this construct to specify an ordinary bracketed character class without additional set operations. Note the white space within it. This is allowed because C<E<sol>xx> is automatically turned on within this construct. All the other escapes accepted by normal bracketed character classes are accepted here as well. Because this construct compiles under L<C<use re 'strict>|re/'strict' mode>, unrecognized escapes that generate warnings in normal classes are fatal errors here, as well as all other warnings from these class elements, as well as some practices that don't currently warn outside C<re 'strict'>. For example you cannot say /(?[ [ \xF ] ])/ # Syntax error! You have to have two hex digits after a braceless C<\x> (use a leading zero to make two). These restrictions are to lower the incidence of typos causing the class to not match what you thought it would. If a regular bracketed character class contains a C<\p{}> or C<\P{}> and is matched against a non-Unicode code point, a warning may be raised, as the result is not Unicode-defined. No such warning will come when using this extended form. The final difference between regular bracketed character classes and these, is that it is not possible to get these to match a multi-character fold. Thus, /(?[ [\xDF] ])/iu does not match the string C<ss>. You don't have to enclose POSIX class names inside double brackets, hence both of the following work: /(?[ [:word:] - [:lower:] ])/ /(?[ [[:word:]] - [[:lower:]] ])/ Any contained POSIX character classes, including things like C<\w> and C<\D> respect the C<E<sol>a> (and C<E<sol>aa>) modifiers. Note that C<< (?[ ]) >> is a regex-compile-time construct. Any attempt to use something which isn't knowable at the time the containing regular expression is compiled is a fatal error. In practice, this means just three limitations: =over 4 =item 1 When compiled within the scope of C<use locale> (or the C<E<sol>l> regex modifier), this construct assumes that the execution-time locale will be a UTF-8 one, and the generated pattern always uses Unicode rules. What gets matched or not thus isn't dependent on the actual runtime locale, so tainting is not enabled. But a C<locale> category warning is raised if the runtime locale turns out to not be UTF-8. =item 2 Any L<user-defined property|perlunicode/"User-Defined Character Properties"> used must be already defined by the time the regular expression is compiled (but note that this construct can be used instead of such properties). =item 3 A regular expression that otherwise would compile using C<E<sol>d> rules, and which uses this construct will instead use C<E<sol>u>. Thus this construct tells Perl that you don't want C<E<sol>d> rules for the entire regular expression containing it. =back Note that skipping white space applies only to the interior of this construct. There must not be any space between any of the characters that form the initial C<(?[>. Nor may there be space between the closing C<])> characters. Just as in all regular expressions, the pattern can be built up by including variables that are interpolated at regex compilation time. But its best to compile each sub-component. my $thai_or_lao = qr/(?[ \p{Thai} + \p{Lao} ])/; my $lower = qr/(?[ \p{Lower} + \p{Digit} ])/; When these are embedded in another pattern, what they match does not change, regardless of parenthesization or what modifiers are in effect in that outer pattern. If you fail to compile the subcomponents, you can get some nasty surprises. For example: my $thai_or_lao = '\p{Thai} + \p{Lao}'; ... qr/(?[ \p{Digit} & $thai_or_lao ])/; compiles to qr/(?[ \p{Digit} & \p{Thai} + \p{Lao} ])/; But this does not have the effect that someone reading the source code would likely expect, as the intersection applies just to C<\p{Thai}>, excluding the Laotian. Its best to compile the subcomponents, but you could also parenthesize the component pieces: my $thai_or_lao = '( \p{Thai} + \p{Lao} )'; But any modifiers will still apply to all the components: my $lower = '\p{Lower} + \p{Digit}'; qr/(?[ \p{Greek} & $lower ])/i; matches upper case things. So just, compile the subcomponents, as illustrated above. Due to the way that Perl parses things, your parentheses and brackets may need to be balanced, even including comments. If you run into any examples, please submit them to L<https://github.com/Perl/perl5/issues>, so that we can have a concrete example for this man page. We may change it so that things that remain legal uses in normal bracketed character classes might become illegal within this experimental construct. One proposal, for example, is to forbid adjacent uses of the same character, as in C<(?[ [aa] ])>. The motivation for such a change is that this usage is likely a typo, as the second "a" adds nothing. perlunitut.pod 0000644 00000017417 15125556335 0007507 0 ustar 00 =head1 NAME perlunitut - Perl Unicode Tutorial =head1 DESCRIPTION The days of just flinging strings around are over. It's well established that modern programs need to be capable of communicating funny accented letters, and things like euro symbols. This means that programmers need new habits. It's easy to program Unicode capable software, but it does require discipline to do it right. There's a lot to know about character sets, and text encodings. It's probably best to spend a full day learning all this, but the basics can be learned in minutes. These are not the very basics, though. It is assumed that you already know the difference between bytes and characters, and realise (and accept!) that there are many different character sets and encodings, and that your program has to be explicit about them. Recommended reading is "The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets (No Excuses!)" by Joel Spolsky, at L<http://joelonsoftware.com/articles/Unicode.html>. This tutorial speaks in rather absolute terms, and provides only a limited view of the wealth of character string related features that Perl has to offer. For most projects, this information will probably suffice. =head2 Definitions It's important to set a few things straight first. This is the most important part of this tutorial. This view may conflict with other information that you may have found on the web, but that's mostly because many sources are wrong. You may have to re-read this entire section a few times... =head3 Unicode B<Unicode> is a character set with room for lots of characters. The ordinal value of a character is called a B<code point>. (But in practice, the distinction between code point and character is blurred, so the terms often are used interchangeably.) There are many, many code points, but computers work with bytes, and a byte has room for only 256 values. Unicode has many more characters than that, so you need a method to make these accessible. Unicode is encoded using several competing encodings, of which UTF-8 is the most used. In a Unicode encoding, multiple subsequent bytes can be used to store a single code point, or simply: character. =head3 UTF-8 B<UTF-8> is a Unicode encoding. Many people think that Unicode and UTF-8 are the same thing, but they're not. There are more Unicode encodings, but much of the world has standardized on UTF-8. UTF-8 treats the first 128 codepoints, 0..127, the same as ASCII. They take only one byte per character. All other characters are encoded as two to four bytes using a complex scheme. Fortunately, Perl handles this for us, so we don't have to worry about this. =head3 Text strings (character strings) B<Text strings>, or B<character strings> are made of characters. Bytes are irrelevant here, and so are encodings. Each character is just that: the character. On a text string, you would do things like: $text =~ s/foo/bar/; if ($string =~ /^\d+$/) { ... } $text = ucfirst $text; my $character_count = length $text; The value of a character (C<ord>, C<chr>) is the corresponding Unicode code point. =head3 Binary strings (byte strings) B<Binary strings>, or B<byte strings> are made of bytes. Here, you don't have characters, just bytes. All communication with the outside world (anything outside of your current Perl process) is done in binary. On a binary string, you would do things like: my (@length_content) = unpack "(V/a)*", $binary; $binary =~ s/\x00\x0F/\xFF\xF0/; # for the brave :) print {$fh} $binary; my $byte_count = length $binary; =head3 Encoding B<Encoding> (as a verb) is the conversion from I<text> to I<binary>. To encode, you have to supply the target encoding, for example C<iso-8859-1> or C<UTF-8>. Some encodings, like the C<iso-8859> ("latin") range, do not support the full Unicode standard; characters that can't be represented are lost in the conversion. =head3 Decoding B<Decoding> is the conversion from I<binary> to I<text>. To decode, you have to know what encoding was used during the encoding phase. And most of all, it must be something decodable. It doesn't make much sense to decode a PNG image into a text string. =head3 Internal format Perl has an B<internal format>, an encoding that it uses to encode text strings so it can store them in memory. All text strings are in this internal format. In fact, text strings are never in any other format! You shouldn't worry about what this format is, because conversion is automatically done when you decode or encode. =head2 Your new toolkit Add to your standard heading the following line: use Encode qw(encode decode); Or, if you're lazy, just: use Encode; =head2 I/O flow (the actual 5 minute tutorial) The typical input/output flow of a program is: 1. Receive and decode 2. Process 3. Encode and output If your input is binary, and is supposed to remain binary, you shouldn't decode it to a text string, of course. But in all other cases, you should decode it. Decoding can't happen reliably if you don't know how the data was encoded. If you get to choose, it's a good idea to standardize on UTF-8. my $foo = decode('UTF-8', get 'http://example.com/'); my $bar = decode('ISO-8859-1', readline STDIN); my $xyzzy = decode('Windows-1251', $cgi->param('foo')); Processing happens as you knew before. The only difference is that you're now using characters instead of bytes. That's very useful if you use things like C<substr>, or C<length>. It's important to realize that there are no bytes in a text string. Of course, Perl has its internal encoding to store the string in memory, but ignore that. If you have to do anything with the number of bytes, it's probably best to move that part to step 3, just after you've encoded the string. Then you know exactly how many bytes it will be in the destination string. The syntax for encoding text strings to binary strings is as simple as decoding: $body = encode('UTF-8', $body); If you needed to know the length of the string in bytes, now's the perfect time for that. Because C<$body> is now a byte string, C<length> will report the number of bytes, instead of the number of characters. The number of characters is no longer known, because characters only exist in text strings. my $byte_count = length $body; And if the protocol you're using supports a way of letting the recipient know which character encoding you used, please help the receiving end by using that feature! For example, E-mail and HTTP support MIME headers, so you can use the C<Content-Type> header. They can also have C<Content-Length> to indicate the number of I<bytes>, which is always a good idea to supply if the number is known. "Content-Type: text/plain; charset=UTF-8", "Content-Length: $byte_count" =head1 SUMMARY Decode everything you receive, encode everything you send out. (If it's text data.) =head1 Q and A (or FAQ) After reading this document, you ought to read L<perlunifaq> too, then L<perluniintro>. =head1 ACKNOWLEDGEMENTS Thanks to Johan Vromans from Squirrel Consultancy. His UTF-8 rants during the Amsterdam Perl Mongers meetings got me interested and determined to find out how to use character encodings in Perl in ways that don't break easily. Thanks to Gerard Goossen from TTY. His presentation "UTF-8 in the wild" (Dutch Perl Workshop 2006) inspired me to publish my thoughts and write this tutorial. Thanks to the people who asked about this kind of stuff in several Perl IRC channels, and have constantly reminded me that a simpler explanation was needed. Thanks to the people who reviewed this document for me, before it went public. They are: Benjamin Smith, Jan-Pieter Cornet, Johan Vromans, Lukas Mai, Nathan Gray. =head1 AUTHOR Juerd Waalboer <#####@juerd.nl> =head1 SEE ALSO L<perlunifaq>, L<perlunicode>, L<perluniintro>, L<Encode> perlopenbsd.pod 0000644 00000002310 15125556335 0007573 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specifically designed to be readable as is. =head1 NAME perlopenbsd - Perl version 5 on OpenBSD systems =head1 DESCRIPTION This document describes various features of OpenBSD that will affect how Perl version 5 (hereafter just Perl) is compiled and/or runs. =head2 OpenBSD core dumps from getprotobyname_r and getservbyname_r with ithreads When Perl is configured to use ithreads, it will use re-entrant library calls in preference to non-re-entrant versions. There is an incompatibility in OpenBSD's C<getprotobyname_r> and C<getservbyname_r> function in versions 3.7 and later that will cause a SEGV when called without doing a C<bzero> on their return structs prior to calling these functions. Current Perl's should handle this problem correctly. Older threaded Perls (5.8.6 or earlier) will run into this problem. If you want to run a threaded Perl on OpenBSD 3.7 or higher, you will need to upgrade to at least Perl 5.8.7. =head1 AUTHOR Steve Peters <steve@fisharerojo.org> Please report any errors, updates, or suggestions to L<https://github.com/Perl/perl5/issues>. perlgit.pod 0000644 00000071627 15125556335 0006745 0 ustar 00 =encoding utf8 =for comment Consistent formatting of this file is achieved with: perl ./Porting/podtidy pod/perlgit.pod =head1 NAME perlgit - Detailed information about git and the Perl repository =head1 DESCRIPTION This document provides details on using git to develop Perl. If you are just interested in working on a quick patch, see L<perlhack> first. This document is intended for people who are regular contributors to Perl, including those with write access to the git repository. =head1 CLONING THE REPOSITORY All of Perl's source code is kept centrally in a Git repository at I<github.com>. You can make a read-only clone of the repository by running: % git clone git://github.com/Perl/perl5.git perl This uses the git protocol (port 9418). If you cannot use the git protocol for firewall reasons, you can also clone via http: % git clone https://github.com/Perl/perl5.git perl =head1 WORKING WITH THE REPOSITORY Once you have changed into the repository directory, you can inspect it. After a clone the repository will contain a single local branch, which will be the current branch as well, as indicated by the asterisk. % git branch * blead Using the -a switch to C<branch> will also show the remote tracking branches in the repository: % git branch -a * blead origin/HEAD origin/blead ... The branches that begin with "origin" correspond to the "git remote" that you cloned from (which is named "origin"). Each branch on the remote will be exactly tracked by these branches. You should NEVER do work on these remote tracking branches. You only ever do work in a local branch. Local branches can be configured to automerge (on pull) from a designated remote tracking branch. This is the case with the default branch C<blead> which will be configured to merge from the remote tracking branch C<origin/blead>. You can see recent commits: % git log And pull new changes from the repository, and update your local repository (must be clean first) % git pull Assuming we are on the branch C<blead> immediately after a pull, this command would be more or less equivalent to: % git fetch % git merge origin/blead In fact if you want to update your local repository without touching your working directory you do: % git fetch And if you want to update your remote-tracking branches for all defined remotes simultaneously you can do % git remote update Neither of these last two commands will update your working directory, however both will update the remote-tracking branches in your repository. To make a local branch of a remote branch: % git checkout -b maint-5.10 origin/maint-5.10 To switch back to blead: % git checkout blead =head2 Finding out your status The most common git command you will use will probably be % git status This command will produce as output a description of the current state of the repository, including modified files and unignored untracked files, and in addition it will show things like what files have been staged for the next commit, and usually some useful information about how to change things. For instance the following: % git status On branch blead Your branch is ahead of 'origin/blead' by 1 commit. Changes to be committed: (use "git reset HEAD <file>..." to unstage) modified: pod/perlgit.pod Changes not staged for commit: (use "git add <file>..." to update what will be committed) (use "git checkout -- <file>..." to discard changes in working directory) modified: pod/perlgit.pod Untracked files: (use "git add <file>..." to include in what will be committed) deliberate.untracked This shows that there were changes to this document staged for commit, and that there were further changes in the working directory not yet staged. It also shows that there was an untracked file in the working directory, and as you can see shows how to change all of this. It also shows that there is one commit on the working branch C<blead> which has not been pushed to the C<origin> remote yet. B<NOTE>: This output is also what you see as a template if you do not provide a message to C<git commit>. =head2 Patch workflow First, please read L<perlhack> for details on hacking the Perl core. That document covers many details on how to create a good patch. If you already have a Perl repository, you should ensure that you're on the I<blead> branch, and your repository is up to date: % git checkout blead % git pull It's preferable to patch against the latest blead version, since this is where new development occurs for all changes other than critical bug fixes. Critical bug fix patches should be made against the relevant maint branches, or should be submitted with a note indicating all the branches where the fix should be applied. Now that we have everything up to date, we need to create a temporary new branch for these changes and switch into it: % git checkout -b orange which is the short form of % git branch orange % git checkout orange Creating a topic branch makes it easier for the maintainers to rebase or merge back into the master blead for a more linear history. If you don't work on a topic branch the maintainer has to manually cherry pick your changes onto blead before they can be applied. That'll get you scolded on perl5-porters, so don't do that. Be Awesome. Then make your changes. For example, if Leon Brocard changes his name to Orange Brocard, we should change his name in the AUTHORS file: % perl -pi -e 's{Leon Brocard}{Orange Brocard}' AUTHORS You can see what files are changed: % git status On branch orange Changes to be committed: (use "git reset HEAD <file>..." to unstage) modified: AUTHORS And you can see the changes: % git diff diff --git a/AUTHORS b/AUTHORS index 293dd70..722c93e 100644 --- a/AUTHORS +++ b/AUTHORS @@ -541,7 +541,7 @@ Lars Hecking <lhecking@nmrc.ucc.ie> Laszlo Molnar <laszlo.molnar@eth.ericsson.se> Leif Huhn <leif@hale.dkstat.com> Len Johnson <lenjay@ibm.net> -Leon Brocard <acme@astray.com> +Orange Brocard <acme@astray.com> Les Peters <lpeters@aol.net> Lesley Binks <lesley.binks@gmail.com> Lincoln D. Stein <lstein@cshl.org> Now commit your change locally: % git commit -a -m 'Rename Leon Brocard to Orange Brocard' Created commit 6196c1d: Rename Leon Brocard to Orange Brocard 1 files changed, 1 insertions(+), 1 deletions(-) The C<-a> option is used to include all files that git tracks that you have changed. If at this time, you only want to commit some of the files you have worked on, you can omit the C<-a> and use the command C<S<git add I<FILE ...>>> before doing the commit. C<S<git add --interactive>> allows you to even just commit portions of files instead of all the changes in them. The C<-m> option is used to specify the commit message. If you omit it, git will open a text editor for you to compose the message interactively. This is useful when the changes are more complex than the sample given here, and, depending on the editor, to know that the first line of the commit message doesn't exceed the 50 character legal maximum. See L<perlhack/Commit message> for more information about what makes a good commit message. Once you've finished writing your commit message and exited your editor, git will write your change to disk and tell you something like this: Created commit daf8e63: explain git status and stuff about remotes 1 files changed, 83 insertions(+), 3 deletions(-) If you re-run C<git status>, you should see something like this: % git status On branch orange Untracked files: (use "git add <file>..." to include in what will be committed) deliberate.untracked nothing added to commit but untracked files present (use "git add" to track) When in doubt, before you do anything else, check your status and read it carefully, many questions are answered directly by the git status output. You can examine your last commit with: % git show HEAD and if you are not happy with either the description or the patch itself you can fix it up by editing the files once more and then issue: % git commit -a --amend Now, create a fork on GitHub to push your branch to, and add it as a remote if you haven't already, as described in the GitHub documentation at L<https://help.github.com/en/articles/working-with-forks>: % git remote add fork git@github.com:MyUser/perl5.git And push the branch to your fork: % git push -u fork orange You should now submit a Pull Request (PR) on GitHub from the new branch to blead. For more information, see the GitHub documentation at L<https://help.github.com/en/articles/creating-a-pull-request-from-a-fork>. You can also send patch files to L<perl5-porters@perl.org|mailto:perl5-porters@perl.org> directly if the patch is not ready to be applied, but intended for discussion. To create a patch file for all your local changes: % git format-patch -M blead.. 0001-Rename-Leon-Brocard-to-Orange-Brocard.patch Or for a lot of changes, e.g. from a topic branch: % git format-patch --stdout -M blead.. > topic-branch-changes.patch If you want to delete your temporary branch, you may do so with: % git checkout blead % git branch -d orange error: The branch 'orange' is not an ancestor of your current HEAD. If you are sure you want to delete it, run 'git branch -D orange'. % git branch -D orange Deleted branch orange. =head2 A note on derived files Be aware that many files in the distribution are derivative--avoid patching them, because git won't see the changes to them, and the build process will overwrite them. Patch the originals instead. Most utilities (like perldoc) are in this category, i.e. patch F<utils/perldoc.PL> rather than F<utils/perldoc>. Similarly, don't create patches for files under F<$src_root/ext> from their copies found in F<$install_root/lib>. If you are unsure about the proper location of a file that may have gotten copied while building the source distribution, consult the F<MANIFEST>. =head2 Cleaning a working directory The command C<git clean> can with varying arguments be used as a replacement for C<make clean>. To reset your working directory to a pristine condition you can do: % git clean -dxf However, be aware this will delete ALL untracked content. You can use % git clean -Xf to remove all ignored untracked files, such as build and test byproduct, but leave any manually created files alone. If you only want to cancel some uncommitted edits, you can use C<git checkout> and give it a list of files to be reverted, or C<git checkout -f> to revert them all. If you want to cancel one or several commits, you can use C<git reset>. =head2 Bisecting C<git> provides a built-in way to determine which commit should be blamed for introducing a given bug. C<git bisect> performs a binary search of history to locate the first failing commit. It is fast, powerful and flexible, but requires some setup and to automate the process an auxiliary shell script is needed. The core provides a wrapper program, F<Porting/bisect.pl>, which attempts to simplify as much as possible, making bisecting as simple as running a Perl one-liner. For example, if you want to know when this became an error: perl -e 'my $a := 2' you simply run this: .../Porting/bisect.pl -e 'my $a := 2;' Using F<Porting/bisect.pl>, with one command (and no other files) it's easy to find out =over 4 =item * Which commit caused this example code to break? =item * Which commit caused this example code to start working? =item * Which commit added the first file to match this regex? =item * Which commit removed the last file to match this regex? =back usually without needing to know which versions of perl to use as start and end revisions, as F<Porting/bisect.pl> automatically searches to find the earliest stable version for which the test case passes. Run C<Porting/bisect.pl --help> for the full documentation, including how to set the C<Configure> and build time options. If you require more flexibility than F<Porting/bisect.pl> has to offer, you'll need to run C<git bisect> yourself. It's most useful to use C<git bisect run> to automate the building and testing of perl revisions. For this you'll need a shell script for C<git> to call to test a particular revision. An example script is F<Porting/bisect-example.sh>, which you should copy B<outside> of the repository, as the bisect process will reset the state to a clean checkout as it runs. The instructions below assume that you copied it as F<~/run> and then edited it as appropriate. You first enter in bisect mode with: % git bisect start For example, if the bug is present on C<HEAD> but wasn't in 5.10.0, C<git> will learn about this when you enter: % git bisect bad % git bisect good perl-5.10.0 Bisecting: 853 revisions left to test after this This results in checking out the median commit between C<HEAD> and C<perl-5.10.0>. You can then run the bisecting process with: % git bisect run ~/run When the first bad commit is isolated, C<git bisect> will tell you so: ca4cfd28534303b82a216cfe83a1c80cbc3b9dc5 is first bad commit commit ca4cfd28534303b82a216cfe83a1c80cbc3b9dc5 Author: Dave Mitchell <davem@fdisolutions.com> Date: Sat Feb 9 14:56:23 2008 +0000 [perl #49472] Attributes + Unknown Error ... bisect run success You can peek into the bisecting process with C<git bisect log> and C<git bisect visualize>. C<git bisect reset> will get you out of bisect mode. Please note that the first C<good> state must be an ancestor of the first C<bad> state. If you want to search for the commit that I<solved> some bug, you have to negate your test case (i.e. exit with C<1> if OK and C<0> if not) and still mark the lower bound as C<good> and the upper as C<bad>. The "first bad commit" has then to be understood as the "first commit where the bug is solved". C<git help bisect> has much more information on how you can tweak your binary searches. Following bisection you may wish to configure, build and test perl at commits identified by the bisection process. Sometimes, particularly with older perls, C<make> may fail during this process. In this case you may be able to patch the source code at the older commit point. To do so, please follow the suggestions provided in L<perlhack/Building perl at older commits>. =head2 Topic branches and rewriting history Individual committers should create topic branches under B<yourname>/B<some_descriptive_name>: % branch="$yourname/$some_descriptive_name" % git checkout -b $branch ... do local edits, commits etc ... % git push origin -u $branch Should you be stuck with an ancient version of git (prior to 1.7), then C<git push> will not have the C<-u> switch, and you have to replace the last step with the following sequence: % git push origin $branch:refs/heads/$branch % git config branch.$branch.remote origin % git config branch.$branch.merge refs/heads/$branch If you want to make changes to someone else's topic branch, you should check with its creator before making any change to it. You might sometimes find that the original author has edited the branch's history. There are lots of good reasons for this. Sometimes, an author might simply be rebasing the branch onto a newer source point. Sometimes, an author might have found an error in an early commit which they wanted to fix before merging the branch to blead. Currently the master repository is configured to forbid non-fast-forward merges. This means that the branches within can not be rebased and pushed as a single step. The only way you will ever be allowed to rebase or modify the history of a pushed branch is to delete it and push it as a new branch under the same name. Please think carefully about doing this. It may be better to sequentially rename your branches so that it is easier for others working with you to cherry-pick their local changes onto the new version. (XXX: needs explanation). If you want to rebase a personal topic branch, you will have to delete your existing topic branch and push as a new version of it. You can do this via the following formula (see the explanation about C<refspec>'s in the git push documentation for details) after you have rebased your branch: # first rebase % git checkout $user/$topic % git fetch % git rebase origin/blead # then "delete-and-push" % git push origin :$user/$topic % git push origin $user/$topic B<NOTE:> it is forbidden at the repository level to delete any of the "primary" branches. That is any branch matching C<m!^(blead|maint|perl)!>. Any attempt to do so will result in git producing an error like this: % git push origin :blead *** It is forbidden to delete blead/maint branches in this repository error: hooks/update exited with error code 1 error: hook declined to update refs/heads/blead To ssh://perl5.git.perl.org/perl ! [remote rejected] blead (hook declined) error: failed to push some refs to 'ssh://perl5.git.perl.org/perl' As a matter of policy we do B<not> edit the history of the blead and maint-* branches. If a typo (or worse) sneaks into a commit to blead or maint-*, we'll fix it in another commit. The only types of updates allowed on these branches are "fast-forwards", where all history is preserved. Annotated tags in the canonical perl.git repository will never be deleted or modified. Think long and hard about whether you want to push a local tag to perl.git before doing so. (Pushing simple tags is not allowed.) =head2 Grafts The perl history contains one mistake which was not caught in the conversion: a merge was recorded in the history between blead and maint-5.10 where no merge actually occurred. Due to the nature of git, this is now impossible to fix in the public repository. You can remove this mis-merge locally by adding the following line to your C<.git/info/grafts> file: 296f12bbbbaa06de9be9d09d3dcf8f4528898a49 434946e0cb7a32589ed92d18008aaa1d88515930 It is particularly important to have this graft line if any bisecting is done in the area of the "merge" in question. =head1 WRITE ACCESS TO THE GIT REPOSITORY Once you have write access, you will need to modify the URL for the origin remote to enable pushing. Edit F<.git/config> with the git-config(1) command: % git config remote.origin.url git@github.com:Perl/perl5.git You can also set up your user name and e-mail address. Most people do this once globally in their F<~/.gitconfig> by doing something like: % git config --global user.name "Ævar Arnfjörð Bjarmason" % git config --global user.email avarab@gmail.com However, if you'd like to override that just for perl, execute something like the following in F<perl>: % git config user.email avar@cpan.org It is also possible to keep C<origin> as a git remote, and add a new remote for ssh access: % git remote add camel git@github.com:Perl/perl5.git This allows you to update your local repository by pulling from C<origin>, which is faster and doesn't require you to authenticate, and to push your changes back with the C<camel> remote: % git fetch camel % git push camel The C<fetch> command just updates the C<camel> refs, as the objects themselves should have been fetched when pulling from C<origin>. =head2 Accepting a patch If you have received a patch file generated using the above section, you should try out the patch. First we need to create a temporary new branch for these changes and switch into it: % git checkout -b experimental Patches that were formatted by C<git format-patch> are applied with C<git am>: % git am 0001-Rename-Leon-Brocard-to-Orange-Brocard.patch Applying Rename Leon Brocard to Orange Brocard Note that some UNIX mail systems can mess with text attachments containing 'From '. This will fix them up: % perl -pi -e's/^>From /From /' \ 0001-Rename-Leon-Brocard-to-Orange-Brocard.patch If just a raw diff is provided, it is also possible use this two-step process: % git apply bugfix.diff % git commit -a -m "Some fixing" \ --author="That Guy <that.guy@internets.com>" Now we can inspect the change: % git show HEAD commit b1b3dab48344cff6de4087efca3dbd63548ab5e2 Author: Leon Brocard <acme@astray.com> Date: Fri Dec 19 17:02:59 2008 +0000 Rename Leon Brocard to Orange Brocard diff --git a/AUTHORS b/AUTHORS index 293dd70..722c93e 100644 --- a/AUTHORS +++ b/AUTHORS @@ -541,7 +541,7 @@ Lars Hecking <lhecking@nmrc.ucc.ie> Laszlo Molnar <laszlo.molnar@eth.ericsson.se> Leif Huhn <leif@hale.dkstat.com> Len Johnson <lenjay@ibm.net> -Leon Brocard <acme@astray.com> +Orange Brocard <acme@astray.com> Les Peters <lpeters@aol.net> Lesley Binks <lesley.binks@gmail.com> Lincoln D. Stein <lstein@cshl.org> If you are a committer to Perl and you think the patch is good, you can then merge it into blead then push it out to the main repository: % git checkout blead % git merge experimental % git push origin blead If you want to delete your temporary branch, you may do so with: % git checkout blead % git branch -d experimental error: The branch 'experimental' is not an ancestor of your current HEAD. If you are sure you want to delete it, run 'git branch -D experimental'. % git branch -D experimental Deleted branch experimental. =head2 Committing to blead The 'blead' branch will become the next production release of Perl. Before pushing I<any> local change to blead, it's incredibly important that you do a few things, lest other committers come after you with pitchforks and torches: =over =item * Make sure you have a good commit message. See L<perlhack/Commit message> for details. =item * Run the test suite. You might not think that one typo fix would break a test file. You'd be wrong. Here's an example of where not running the suite caused problems. A patch was submitted that added a couple of tests to an existing F<.t>. It couldn't possibly affect anything else, so no need to test beyond the single affected F<.t>, right? But, the submitter's email address had changed since the last of their submissions, and this caused other tests to fail. Running the test target given in the next item would have caught this problem. =item * If you don't run the full test suite, at least C<make test_porting>. This will run basic sanity checks. To see which sanity checks, have a look in F<t/porting>. =item * If you make any changes that affect miniperl or core routines that have different code paths for miniperl, be sure to run C<make minitest>. This will catch problems that even the full test suite will not catch because it runs a subset of tests under miniperl rather than perl. =back =head2 On merging and rebasing Simple, one-off commits pushed to the 'blead' branch should be simple commits that apply cleanly. In other words, you should make sure your work is committed against the current position of blead, so that you can push back to the master repository without merging. Sometimes, blead will move while you're building or testing your changes. When this happens, your push will be rejected with a message like this: To ssh://perl5.git.perl.org/perl.git ! [rejected] blead -> blead (non-fast-forward) error: failed to push some refs to 'ssh://perl5.git.perl.org/perl.git' To prevent you from losing history, non-fast-forward updates were rejected Merge the remote changes (e.g. 'git pull') before pushing again. See the 'Note about fast-forwards' section of 'git push --help' for details. When this happens, you can just I<rebase> your work against the new position of blead, like this (assuming your remote for the master repository is "p5p"): % git fetch p5p % git rebase p5p/blead You will see your commits being re-applied, and you will then be able to push safely. More information about rebasing can be found in the documentation for the git-rebase(1) command. For larger sets of commits that only make sense together, or that would benefit from a summary of the set's purpose, you should use a merge commit. You should perform your work on a L<topic branch|/Topic branches and rewriting history>, which you should regularly rebase against blead to ensure that your code is not broken by blead moving. When you have finished your work, please perform a final rebase and test. Linear history is something that gets lost with every commit on blead, but a final rebase makes the history linear again, making it easier for future maintainers to see what has happened. Rebase as follows (assuming your work was on the branch C<< committer/somework >>): % git checkout committer/somework % git rebase blead Then you can merge it into master like this: % git checkout blead % git merge --no-ff --no-commit committer/somework % git commit -a The switches above deserve explanation. C<--no-ff> indicates that even if all your work can be applied linearly against blead, a merge commit should still be prepared. This ensures that all your work will be shown as a side branch, with all its commits merged into the mainstream blead by the merge commit. C<--no-commit> means that the merge commit will be I<prepared> but not I<committed>. The commit is then actually performed when you run the next command, which will bring up your editor to describe the commit. Without C<--no-commit>, the commit would be made with nearly no useful message, which would greatly diminish the value of the merge commit as a placeholder for the work's description. When describing the merge commit, explain the purpose of the branch, and keep in mind that this description will probably be used by the eventual release engineer when reviewing the next perldelta document. =head2 Committing to maintenance versions Maintenance versions should only be altered to add critical bug fixes, see L<perlpolicy>. To commit to a maintenance version of perl, you need to create a local tracking branch: % git checkout --track -b maint-5.005 origin/maint-5.005 This creates a local branch named C<maint-5.005>, which tracks the remote branch C<origin/maint-5.005>. Then you can pull, commit, merge and push as before. You can also cherry-pick commits from blead and another branch, by using the C<git cherry-pick> command. It is recommended to use the B<-x> option to C<git cherry-pick> in order to record the SHA1 of the original commit in the new commit message. Before pushing any change to a maint version, make sure you've satisfied the steps in L</Committing to blead> above. =head2 Using a smoke-me branch to test changes Sometimes a change affects code paths which you cannot test on the OSes which are directly available to you and it would be wise to have users on other OSes test the change before you commit it to blead. Fortunately, there is a way to get your change smoke-tested on various OSes: push it to a "smoke-me" branch and wait for certain automated smoke-testers to report the results from their OSes. A "smoke-me" branch is identified by the branch name: specifically, as seen on github.com it must be a local branch whose first name component is precisely C<smoke-me>. The procedure for doing this is roughly as follows (using the example of tonyc's smoke-me branch called win32stat): First, make a local branch and switch to it: % git checkout -b win32stat Make some changes, build perl and test your changes, then commit them to your local branch. Then push your local branch to a remote smoke-me branch: % git push origin win32stat:smoke-me/tonyc/win32stat Now you can switch back to blead locally: % git checkout blead and continue working on other things while you wait a day or two, keeping an eye on the results reported for your smoke-me branch at L<http://perl.develop-help.com/?b=smoke-me/tonyc/win32state>. If all is well then update your blead branch: % git pull then checkout your smoke-me branch once more and rebase it on blead: % git rebase blead win32stat Now switch back to blead and merge your smoke-me branch into it: % git checkout blead % git merge win32stat As described earlier, if there are many changes on your smoke-me branch then you should prepare a merge commit in which to give an overview of those changes by using the following command instead of the last command above: % git merge win32stat --no-ff --no-commit You should now build perl and test your (merged) changes one last time (ideally run the whole test suite, but failing that at least run the F<t/porting/*.t> tests) before pushing your changes as usual: % git push origin blead Finally, you should then delete the remote smoke-me branch: % git push origin :smoke-me/tonyc/win32stat (which is likely to produce a warning like this, which can be ignored: remote: fatal: ambiguous argument 'refs/heads/smoke-me/tonyc/win32stat': unknown revision or path not in the working tree. remote: Use '--' to separate paths from revisions ) and then delete your local branch: % git branch -d win32stat perl56delta.pod 0000644 00000321301 15125556335 0007411 0 ustar 00 =head1 NAME perl56delta - what's new for perl v5.6.0 =head1 DESCRIPTION This document describes differences between the 5.005 release and the 5.6.0 release. =head1 Core Enhancements =head2 Interpreter cloning, threads, and concurrency Perl 5.6.0 introduces the beginnings of support for running multiple interpreters concurrently in different threads. In conjunction with the perl_clone() API call, which can be used to selectively duplicate the state of any given interpreter, it is possible to compile a piece of code once in an interpreter, clone that interpreter one or more times, and run all the resulting interpreters in distinct threads. On the Windows platform, this feature is used to emulate fork() at the interpreter level. See L<perlfork> for details about that. This feature is still in evolution. It is eventually meant to be used to selectively clone a subroutine and data reachable from that subroutine in a separate interpreter and run the cloned subroutine in a separate thread. Since there is no shared data between the interpreters, little or no locking will be needed (unless parts of the symbol table are explicitly shared). This is obviously intended to be an easy-to-use replacement for the existing threads support. Support for cloning interpreters and interpreter concurrency can be enabled using the -Dusethreads Configure option (see win32/Makefile for how to enable it on Windows.) The resulting perl executable will be functionally identical to one that was built with -Dmultiplicity, but the perl_clone() API call will only be available in the former. -Dusethreads enables the cpp macro USE_ITHREADS by default, which in turn enables Perl source code changes that provide a clear separation between the op tree and the data it operates with. The former is immutable, and can therefore be shared between an interpreter and all of its clones, while the latter is considered local to each interpreter, and is therefore copied for each clone. Note that building Perl with the -Dusemultiplicity Configure option is adequate if you wish to run multiple B<independent> interpreters concurrently in different threads. -Dusethreads only provides the additional functionality of the perl_clone() API call and other support for running B<cloned> interpreters concurrently. NOTE: This is an experimental feature. Implementation details are subject to change. =head2 Lexically scoped warning categories You can now control the granularity of warnings emitted by perl at a finer level using the C<use warnings> pragma. L<warnings> and L<perllexwarn> have copious documentation on this feature. =head2 Unicode and UTF-8 support Perl now uses UTF-8 as its internal representation for character strings. The C<utf8> and C<bytes> pragmas are used to control this support in the current lexical scope. See L<perlunicode>, L<utf8> and L<bytes> for more information. This feature is expected to evolve quickly to support some form of I/O disciplines that can be used to specify the kind of input and output data (bytes or characters). Until that happens, additional modules from CPAN will be needed to complete the toolkit for dealing with Unicode. NOTE: This should be considered an experimental feature. Implementation details are subject to change. =head2 Support for interpolating named characters The new C<\N> escape interpolates named characters within strings. For example, C<"Hi! \N{WHITE SMILING FACE}"> evaluates to a string with a unicode smiley face at the end. =head2 "our" declarations An "our" declaration introduces a value that can be best understood as a lexically scoped symbolic alias to a global variable in the package that was current where the variable was declared. This is mostly useful as an alternative to the C<vars> pragma, but also provides the opportunity to introduce typing and other attributes for such variables. See L<perlfunc/our>. =head2 Support for strings represented as a vector of ordinals Literals of the form C<v1.2.3.4> are now parsed as a string composed of characters with the specified ordinals. This is an alternative, more readable way to construct (possibly unicode) strings instead of interpolating characters, as in C<"\x{1}\x{2}\x{3}\x{4}">. The leading C<v> may be omitted if there are more than two ordinals, so C<1.2.3> is parsed the same as C<v1.2.3>. Strings written in this form are also useful to represent version "numbers". It is easy to compare such version "numbers" (which are really just plain strings) using any of the usual string comparison operators C<eq>, C<ne>, C<lt>, C<gt>, etc., or perform bitwise string operations on them using C<|>, C<&>, etc. In conjunction with the new C<$^V> magic variable (which contains the perl version as a string), such literals can be used as a readable way to check if you're running a particular version of Perl: # this will parse in older versions of Perl also if ($^V and $^V gt v5.6.0) { # new features supported } C<require> and C<use> also have some special magic to support such literals, but this particular usage should be avoided because it leads to misleading error messages under versions of Perl which don't support vector strings. Using a true version number will ensure correct behavior in all versions of Perl: require 5.006; # run time check for v5.6 use 5.006_001; # compile time check for v5.6.1 Also, C<sprintf> and C<printf> support the Perl-specific format flag C<%v> to print ordinals of characters in arbitrary strings: printf "v%vd", $^V; # prints current version, such as "v5.5.650" printf "%*vX", ":", $addr; # formats IPv6 address printf "%*vb", " ", $bits; # displays bitstring See L<perldata/"Scalar value constructors"> for additional information. =head2 Improved Perl version numbering system Beginning with Perl version 5.6.0, the version number convention has been changed to a "dotted integer" scheme that is more commonly found in open source projects. Maintenance versions of v5.6.0 will be released as v5.6.1, v5.6.2 etc. The next development series following v5.6.0 will be numbered v5.7.x, beginning with v5.7.0, and the next major production release following v5.6.0 will be v5.8.0. The English module now sets $PERL_VERSION to $^V (a string value) rather than C<$]> (a numeric value). (This is a potential incompatibility. Send us a report via perlbug if you are affected by this.) The v1.2.3 syntax is also now legal in Perl. See L</Support for strings represented as a vector of ordinals> for more on that. To cope with the new versioning system's use of at least three significant digits for each version component, the method used for incrementing the subversion number has also changed slightly. We assume that versions older than v5.6.0 have been incrementing the subversion component in multiples of 10. Versions after v5.6.0 will increment them by 1. Thus, using the new notation, 5.005_03 is the "same" as v5.5.30, and the first maintenance version following v5.6.0 will be v5.6.1 (which should be read as being equivalent to a floating point value of 5.006_001 in the older format, stored in C<$]>). =head2 New syntax for declaring subroutine attributes Formerly, if you wanted to mark a subroutine as being a method call or as requiring an automatic lock() when it is entered, you had to declare that with a C<use attrs> pragma in the body of the subroutine. That can now be accomplished with declaration syntax, like this: sub mymethod : locked method; ... sub mymethod : locked method { ... } sub othermethod :locked :method; ... sub othermethod :locked :method { ... } (Note how only the first C<:> is mandatory, and whitespace surrounding the C<:> is optional.) F<AutoSplit.pm> and F<SelfLoader.pm> have been updated to keep the attributes with the stubs they provide. See L<attributes>. =head2 File and directory handles can be autovivified Similar to how constructs such as C<< $x->[0] >> autovivify a reference, handle constructors (open(), opendir(), pipe(), socketpair(), sysopen(), socket(), and accept()) now autovivify a file or directory handle if the handle passed to them is an uninitialized scalar variable. This allows the constructs such as C<open(my $fh, ...)> and C<open(local $fh,...)> to be used to create filehandles that will conveniently be closed automatically when the scope ends, provided there are no other references to them. This largely eliminates the need for typeglobs when opening filehandles that must be passed around, as in the following example: sub myopen { open my $fh, "@_" or die "Can't open '@_': $!"; return $fh; } { my $f = myopen("</etc/motd"); print <$f>; # $f implicitly closed here } =head2 open() with more than two arguments If open() is passed three arguments instead of two, the second argument is used as the mode and the third argument is taken to be the file name. This is primarily useful for protecting against unintended magic behavior of the traditional two-argument form. See L<perlfunc/open>. =head2 64-bit support Any platform that has 64-bit integers either (1) natively as longs or ints (2) via special compiler flags (3) using long long or int64_t is able to use "quads" (64-bit integers) as follows: =over 4 =item * constants (decimal, hexadecimal, octal, binary) in the code =item * arguments to oct() and hex() =item * arguments to print(), printf() and sprintf() (flag prefixes ll, L, q) =item * printed as such =item * pack() and unpack() "q" and "Q" formats =item * in basic arithmetics: + - * / % (NOTE: operating close to the limits of the integer values may produce surprising results) =item * in bit arithmetics: & | ^ ~ << >> (NOTE: these used to be forced to be 32 bits wide but now operate on the full native width.) =item * vec() =back Note that unless you have the case (a) you will have to configure and compile Perl using the -Duse64bitint Configure flag. NOTE: The Configure flags -Duselonglong and -Duse64bits have been deprecated. Use -Duse64bitint instead. There are actually two modes of 64-bitness: the first one is achieved using Configure -Duse64bitint and the second one using Configure -Duse64bitall. The difference is that the first one is minimal and the second one maximal. The first works in more places than the second. The C<use64bitint> does only as much as is required to get 64-bit integers into Perl (this may mean, for example, using "long longs") while your memory may still be limited to 2 gigabytes (because your pointers could still be 32-bit). Note that the name C<64bitint> does not imply that your C compiler will be using 64-bit C<int>s (it might, but it doesn't have to): the C<use64bitint> means that you will be able to have 64 bits wide scalar values. The C<use64bitall> goes all the way by attempting to switch also integers (if it can), longs (and pointers) to being 64-bit. This may create an even more binary incompatible Perl than -Duse64bitint: the resulting executable may not run at all in a 32-bit box, or you may have to reboot/reconfigure/rebuild your operating system to be 64-bit aware. Natively 64-bit systems like Alpha and Cray need neither -Duse64bitint nor -Duse64bitall. Last but not least: note that due to Perl's habit of always using floating point numbers, the quads are still not true integers. When quads overflow their limits (0...18_446_744_073_709_551_615 unsigned, -9_223_372_036_854_775_808...9_223_372_036_854_775_807 signed), they are silently promoted to floating point numbers, after which they will start losing precision (in their lower digits). NOTE: 64-bit support is still experimental on most platforms. Existing support only covers the LP64 data model. In particular, the LLP64 data model is not yet supported. 64-bit libraries and system APIs on many platforms have not stabilized--your mileage may vary. =head2 Large file support If you have filesystems that support "large files" (files larger than 2 gigabytes), you may now also be able to create and access them from Perl. NOTE: The default action is to enable large file support, if available on the platform. If the large file support is on, and you have a Fcntl constant O_LARGEFILE, the O_LARGEFILE is automatically added to the flags of sysopen(). Beware that unless your filesystem also supports "sparse files" seeking to umpteen petabytes may be inadvisable. Note that in addition to requiring a proper file system to do large files you may also need to adjust your per-process (or your per-system, or per-process-group, or per-user-group) maximum filesize limits before running Perl scripts that try to handle large files, especially if you intend to write such files. Finally, in addition to your process/process group maximum filesize limits, you may have quota limits on your filesystems that stop you (your user id or your user group id) from using large files. Adjusting your process/user/group/file system/operating system limits is outside the scope of Perl core language. For process limits, you may try increasing the limits using your shell's limits/limit/ulimit command before running Perl. The BSD::Resource extension (not included with the standard Perl distribution) may also be of use, it offers the getrlimit/setrlimit interface that can be used to adjust process resource usage limits, including the maximum filesize limit. =head2 Long doubles In some systems you may be able to use long doubles to enhance the range and precision of your double precision floating point numbers (that is, Perl's numbers). Use Configure -Duselongdouble to enable this support (if it is available). =head2 "more bits" You can "Configure -Dusemorebits" to turn on both the 64-bit support and the long double support. =head2 Enhanced support for sort() subroutines Perl subroutines with a prototype of C<($$)>, and XSUBs in general, can now be used as sort subroutines. In either case, the two elements to be compared are passed as normal parameters in @_. See L<perlfunc/sort>. For unprototyped sort subroutines, the historical behavior of passing the elements to be compared as the global variables $a and $b remains unchanged. =head2 C<sort $coderef @foo> allowed sort() did not accept a subroutine reference as the comparison function in earlier versions. This is now permitted. =head2 File globbing implemented internally Perl now uses the File::Glob implementation of the glob() operator automatically. This avoids using an external csh process and the problems associated with it. NOTE: This is currently an experimental feature. Interfaces and implementation are subject to change. =head2 Support for CHECK blocks In addition to C<BEGIN>, C<INIT>, C<END>, C<DESTROY> and C<AUTOLOAD>, subroutines named C<CHECK> are now special. These are queued up during compilation and behave similar to END blocks, except they are called at the end of compilation rather than at the end of execution. They cannot be called directly. =head2 POSIX character class syntax [: :] supported For example to match alphabetic characters use /[[:alpha:]]/. See L<perlre> for details. =head2 Better pseudo-random number generator In 5.005_0x and earlier, perl's rand() function used the C library rand(3) function. As of 5.005_52, Configure tests for drand48(), random(), and rand() (in that order) and picks the first one it finds. These changes should result in better random numbers from rand(). =head2 Improved C<qw//> operator The C<qw//> operator is now evaluated at compile time into a true list instead of being replaced with a run time call to C<split()>. This removes the confusing misbehaviour of C<qw//> in scalar context, which had inherited that behaviour from split(). Thus: $foo = ($bar) = qw(a b c); print "$foo|$bar\n"; now correctly prints "3|a", instead of "2|a". =head2 Better worst-case behavior of hashes Small changes in the hashing algorithm have been implemented in order to improve the distribution of lower order bits in the hashed value. This is expected to yield better performance on keys that are repeated sequences. =head2 pack() format 'Z' supported The new format type 'Z' is useful for packing and unpacking null-terminated strings. See L<perlfunc/"pack">. =head2 pack() format modifier '!' supported The new format type modifier '!' is useful for packing and unpacking native shorts, ints, and longs. See L<perlfunc/"pack">. =head2 pack() and unpack() support counted strings The template character '/' can be used to specify a counted string type to be packed or unpacked. See L<perlfunc/"pack">. =head2 Comments in pack() templates The '#' character in a template introduces a comment up to end of the line. This facilitates documentation of pack() templates. =head2 Weak references In previous versions of Perl, you couldn't cache objects so as to allow them to be deleted if the last reference from outside the cache is deleted. The reference in the cache would hold a reference count on the object and the objects would never be destroyed. Another familiar problem is with circular references. When an object references itself, its reference count would never go down to zero, and it would not get destroyed until the program is about to exit. Weak references solve this by allowing you to "weaken" any reference, that is, make it not count towards the reference count. When the last non-weak reference to an object is deleted, the object is destroyed and all the weak references to the object are automatically undef-ed. To use this feature, you need the Devel::WeakRef package from CPAN, which contains additional documentation. NOTE: This is an experimental feature. Details are subject to change. =head2 Binary numbers supported Binary numbers are now supported as literals, in s?printf formats, and C<oct()>: $answer = 0b101010; printf "The answer is: %b\n", oct("0b101010"); =head2 Lvalue subroutines Subroutines can now return modifiable lvalues. See L<perlsub/"Lvalue subroutines">. NOTE: This is an experimental feature. Details are subject to change. =head2 Some arrows may be omitted in calls through references Perl now allows the arrow to be omitted in many constructs involving subroutine calls through references. For example, C<< $foo[10]->('foo') >> may now be written C<$foo[10]('foo')>. This is rather similar to how the arrow may be omitted from C<< $foo[10]->{'foo'} >>. Note however, that the arrow is still required for C<< foo(10)->('bar') >>. =head2 Boolean assignment operators are legal lvalues Constructs such as C<($a ||= 2) += 1> are now allowed. =head2 exists() is supported on subroutine names The exists() builtin now works on subroutine names. A subroutine is considered to exist if it has been declared (even if implicitly). See L<perlfunc/exists> for examples. =head2 exists() and delete() are supported on array elements The exists() and delete() builtins now work on simple arrays as well. The behavior is similar to that on hash elements. exists() can be used to check whether an array element has been initialized. This avoids autovivifying array elements that don't exist. If the array is tied, the EXISTS() method in the corresponding tied package will be invoked. delete() may be used to remove an element from the array and return it. The array element at that position returns to its uninitialized state, so that testing for the same element with exists() will return false. If the element happens to be the one at the end, the size of the array also shrinks up to the highest element that tests true for exists(), or 0 if none such is found. If the array is tied, the DELETE() method in the corresponding tied package will be invoked. See L<perlfunc/exists> and L<perlfunc/delete> for examples. =head2 Pseudo-hashes work better Dereferencing some types of reference values in a pseudo-hash, such as C<< $ph->{foo}[1] >>, was accidentally disallowed. This has been corrected. When applied to a pseudo-hash element, exists() now reports whether the specified value exists, not merely if the key is valid. delete() now works on pseudo-hashes. When given a pseudo-hash element or slice it deletes the values corresponding to the keys (but not the keys themselves). See L<perlref/"Pseudo-hashes: Using an array as a hash">. Pseudo-hash slices with constant keys are now optimized to array lookups at compile-time. List assignments to pseudo-hash slices are now supported. The C<fields> pragma now provides ways to create pseudo-hashes, via fields::new() and fields::phash(). See L<fields>. NOTE: The pseudo-hash data type continues to be experimental. Limiting oneself to the interface elements provided by the fields pragma will provide protection from any future changes. =head2 Automatic flushing of output buffers fork(), exec(), system(), qx//, and pipe open()s now flush buffers of all files opened for output when the operation was attempted. This mostly eliminates confusing buffering mishaps suffered by users unaware of how Perl internally handles I/O. This is not supported on some platforms like Solaris where a suitably correct implementation of fflush(NULL) isn't available. =head2 Better diagnostics on meaningless filehandle operations Constructs such as C<< open(<FH>) >> and C<< close(<FH>) >> are compile time errors. Attempting to read from filehandles that were opened only for writing will now produce warnings (just as writing to read-only filehandles does). =head2 Where possible, buffered data discarded from duped input filehandle C<< open(NEW, "<&OLD") >> now attempts to discard any data that was previously read and buffered in C<OLD> before duping the handle. On platforms where doing this is allowed, the next read operation on C<NEW> will return the same data as the corresponding operation on C<OLD>. Formerly, it would have returned the data from the start of the following disk block instead. =head2 eof() has the same old magic as <> C<eof()> would return true if no attempt to read from C<< <> >> had yet been made. C<eof()> has been changed to have a little magic of its own, it now opens the C<< <> >> files. =head2 binmode() can be used to set :crlf and :raw modes binmode() now accepts a second argument that specifies a discipline for the handle in question. The two pseudo-disciplines ":raw" and ":crlf" are currently supported on DOS-derivative platforms. See L<perlfunc/"binmode"> and L<open>. =head2 C<-T> filetest recognizes UTF-8 encoded files as "text" The algorithm used for the C<-T> filetest has been enhanced to correctly identify UTF-8 content as "text". =head2 system(), backticks and pipe open now reflect exec() failure On Unix and similar platforms, system(), qx() and open(FOO, "cmd |") etc., are implemented via fork() and exec(). When the underlying exec() fails, earlier versions did not report the error properly, since the exec() happened to be in a different process. The child process now communicates with the parent about the error in launching the external command, which allows these constructs to return with their usual error value and set $!. =head2 Improved diagnostics Line numbers are no longer suppressed (under most likely circumstances) during the global destruction phase. Diagnostics emitted from code running in threads other than the main thread are now accompanied by the thread ID. Embedded null characters in diagnostics now actually show up. They used to truncate the message in prior versions. $foo::a and $foo::b are now exempt from "possible typo" warnings only if sort() is encountered in package C<foo>. Unrecognized alphabetic escapes encountered when parsing quote constructs now generate a warning, since they may take on new semantics in later versions of Perl. Many diagnostics now report the internal operation in which the warning was provoked, like so: Use of uninitialized value in concatenation (.) at (eval 1) line 1. Use of uninitialized value in print at (eval 1) line 1. Diagnostics that occur within eval may also report the file and line number where the eval is located, in addition to the eval sequence number and the line number within the evaluated text itself. For example: Not enough arguments for scalar at (eval 4)[newlib/perl5db.pl:1411] line 2, at EOF =head2 Diagnostics follow STDERR Diagnostic output now goes to whichever file the C<STDERR> handle is pointing at, instead of always going to the underlying C runtime library's C<stderr>. =head2 More consistent close-on-exec behavior On systems that support a close-on-exec flag on filehandles, the flag is now set for any handles created by pipe(), socketpair(), socket(), and accept(), if that is warranted by the value of $^F that may be in effect. Earlier versions neglected to set the flag for handles created with these operators. See L<perlfunc/pipe>, L<perlfunc/socketpair>, L<perlfunc/socket>, L<perlfunc/accept>, and L<perlvar/$^F>. =head2 syswrite() ease-of-use The length argument of C<syswrite()> has become optional. =head2 Better syntax checks on parenthesized unary operators Expressions such as: print defined(&foo,&bar,&baz); print uc("foo","bar","baz"); undef($foo,&bar); used to be accidentally allowed in earlier versions, and produced unpredictable behaviour. Some produced ancillary warnings when used in this way; others silently did the wrong thing. The parenthesized forms of most unary operators that expect a single argument now ensure that they are not called with more than one argument, making the cases shown above syntax errors. The usual behaviour of: print defined &foo, &bar, &baz; print uc "foo", "bar", "baz"; undef $foo, &bar; remains unchanged. See L<perlop>. =head2 Bit operators support full native integer width The bit operators (& | ^ ~ << >>) now operate on the full native integral width (the exact size of which is available in $Config{ivsize}). For example, if your platform is either natively 64-bit or if Perl has been configured to use 64-bit integers, these operations apply to 8 bytes (as opposed to 4 bytes on 32-bit platforms). For portability, be sure to mask off the excess bits in the result of unary C<~>, e.g., C<~$x & 0xffffffff>. =head2 Improved security features More potentially unsafe operations taint their results for improved security. The C<passwd> and C<shell> fields returned by the getpwent(), getpwnam(), and getpwuid() are now tainted, because the user can affect their own encrypted password and login shell. The variable modified by shmread(), and messages returned by msgrcv() (and its object-oriented interface IPC::SysV::Msg::rcv) are also tainted, because other untrusted processes can modify messages and shared memory segments for their own nefarious purposes. =head2 More functional bareword prototype (*) Bareword prototypes have been rationalized to enable them to be used to override builtins that accept barewords and interpret them in a special way, such as C<require> or C<do>. Arguments prototyped as C<*> will now be visible within the subroutine as either a simple scalar or as a reference to a typeglob. See L<perlsub/Prototypes>. =head2 C<require> and C<do> may be overridden C<require> and C<do 'file'> operations may be overridden locally by importing subroutines of the same name into the current package (or globally by importing them into the CORE::GLOBAL:: namespace). Overriding C<require> will also affect C<use>, provided the override is visible at compile-time. See L<perlsub/"Overriding Built-in Functions">. =head2 $^X variables may now have names longer than one character Formerly, $^X was synonymous with ${"\cX"}, but $^XY was a syntax error. Now variable names that begin with a control character may be arbitrarily long. However, for compatibility reasons, these variables I<must> be written with explicit braces, as C<${^XY}> for example. C<${^XYZ}> is synonymous with ${"\cXYZ"}. Variable names with more than one control character, such as C<${^XY^Z}>, are illegal. The old syntax has not changed. As before, `^X' may be either a literal control-X character or the two-character sequence `caret' plus `X'. When braces are omitted, the variable name stops after the control character. Thus C<"$^XYZ"> continues to be synonymous with C<$^X . "YZ"> as before. As before, lexical variables may not have names beginning with control characters. As before, variables whose names begin with a control character are always forced to be in package `main'. All such variables are reserved for future extensions, except those that begin with C<^_>, which may be used by user programs and are guaranteed not to acquire special meaning in any future version of Perl. =head2 New variable $^C reflects C<-c> switch C<$^C> has a boolean value that reflects whether perl is being run in compile-only mode (i.e. via the C<-c> switch). Since BEGIN blocks are executed under such conditions, this variable enables perl code to determine whether actions that make sense only during normal running are warranted. See L<perlvar>. =head2 New variable $^V contains Perl version as a string C<$^V> contains the Perl version number as a string composed of characters whose ordinals match the version numbers, i.e. v5.6.0. This may be used in string comparisons. See C<Support for strings represented as a vector of ordinals> for an example. =head2 Optional Y2K warnings If Perl is built with the cpp macro C<PERL_Y2KWARN> defined, it emits optional warnings when concatenating the number 19 with another number. This behavior must be specifically enabled when running Configure. See F<INSTALL> and F<README.Y2K>. =head2 Arrays now always interpolate into double-quoted strings In double-quoted strings, arrays now interpolate, no matter what. The behavior in earlier versions of perl 5 was that arrays would interpolate into strings if the array had been mentioned before the string was compiled, and otherwise Perl would raise a fatal compile-time error. In versions 5.000 through 5.003, the error was Literal @example now requires backslash In versions 5.004_01 through 5.6.0, the error was In string, @example now must be written as \@example The idea here was to get people into the habit of writing C<"fred\@example.com"> when they wanted a literal C<@> sign, just as they have always written C<"Give me back my \$5"> when they wanted a literal C<$> sign. Starting with 5.6.1, when Perl now sees an C<@> sign in a double-quoted string, it I<always> attempts to interpolate an array, regardless of whether or not the array has been used or declared already. The fatal error has been downgraded to an optional warning: Possible unintended interpolation of @example in string This warns you that C<"fred@example.com"> is going to turn into C<fred.com> if you don't backslash the C<@>. See http://perl.plover.com/at-error.html for more details about the history here. =head2 @- and @+ provide starting/ending offsets of regex matches The new magic variables @- and @+ provide the starting and ending offsets, respectively, of $&, $1, $2, etc. See L<perlvar> for details. =head1 Modules and Pragmata =head2 Modules =over 4 =item attributes While used internally by Perl as a pragma, this module also provides a way to fetch subroutine and variable attributes. See L<attributes>. =item B The Perl Compiler suite has been extensively reworked for this release. More of the standard Perl test suite passes when run under the Compiler, but there is still a significant way to go to achieve production quality compiled executables. NOTE: The Compiler suite remains highly experimental. The generated code may not be correct, even when it manages to execute without errors. =item Benchmark Overall, Benchmark results exhibit lower average error and better timing accuracy. You can now run tests for I<n> seconds instead of guessing the right number of tests to run: e.g., timethese(-5, ...) will run each code for at least 5 CPU seconds. Zero as the "number of repetitions" means "for at least 3 CPU seconds". The output format has also changed. For example: use Benchmark;$x=3;timethese(-5,{a=>sub{$x*$x},b=>sub{$x**2}}) will now output something like this: Benchmark: running a, b, each for at least 5 CPU seconds... a: 5 wallclock secs ( 5.77 usr + 0.00 sys = 5.77 CPU) @ 200551.91/s (n=1156516) b: 4 wallclock secs ( 5.00 usr + 0.02 sys = 5.02 CPU) @ 159605.18/s (n=800686) New features: "each for at least N CPU seconds...", "wallclock secs", and the "@ operations/CPU second (n=operations)". timethese() now returns a reference to a hash of Benchmark objects containing the test results, keyed on the names of the tests. timethis() now returns the iterations field in the Benchmark result object instead of 0. timethese(), timethis(), and the new cmpthese() (see below) can also take a format specifier of 'none' to suppress output. A new function countit() is just like timeit() except that it takes a TIME instead of a COUNT. A new function cmpthese() prints a chart comparing the results of each test returned from a timethese() call. For each possible pair of tests, the percentage speed difference (iters/sec or seconds/iter) is shown. For other details, see L<Benchmark>. =item ByteLoader The ByteLoader is a dedicated extension to generate and run Perl bytecode. See L<ByteLoader>. =item constant References can now be used. The new version also allows a leading underscore in constant names, but disallows a double leading underscore (as in "__LINE__"). Some other names are disallowed or warned against, including BEGIN, END, etc. Some names which were forced into main:: used to fail silently in some cases; now they're fatal (outside of main::) and an optional warning (inside of main::). The ability to detect whether a constant had been set with a given name has been added. See L<constant>. =item charnames This pragma implements the C<\N> string escape. See L<charnames>. =item Data::Dumper A C<Maxdepth> setting can be specified to avoid venturing too deeply into deep data structures. See L<Data::Dumper>. The XSUB implementation of Dump() is now automatically called if the C<Useqq> setting is not in use. Dumping C<qr//> objects works correctly. =item DB C<DB> is an experimental module that exposes a clean abstraction to Perl's debugging API. =item DB_File DB_File can now be built with Berkeley DB versions 1, 2 or 3. See C<ext/DB_File/Changes>. =item Devel::DProf Devel::DProf, a Perl source code profiler has been added. See L<Devel::DProf> and L<dprofpp>. =item Devel::Peek The Devel::Peek module provides access to the internal representation of Perl variables and data. It is a data debugging tool for the XS programmer. =item Dumpvalue The Dumpvalue module provides screen dumps of Perl data. =item DynaLoader DynaLoader now supports a dl_unload_file() function on platforms that support unloading shared objects using dlclose(). Perl can also optionally arrange to unload all extension shared objects loaded by Perl. To enable this, build Perl with the Configure option C<-Accflags=-DDL_UNLOAD_ALL_AT_EXIT>. (This maybe useful if you are using Apache with mod_perl.) =item English $PERL_VERSION now stands for C<$^V> (a string value) rather than for C<$]> (a numeric value). =item Env Env now supports accessing environment variables like PATH as array variables. =item Fcntl More Fcntl constants added: F_SETLK64, F_SETLKW64, O_LARGEFILE for large file (more than 4GB) access (NOTE: the O_LARGEFILE is automatically added to sysopen() flags if large file support has been configured, as is the default), Free/Net/OpenBSD locking behaviour flags F_FLOCK, F_POSIX, Linux F_SHLCK, and O_ACCMODE: the combined mask of O_RDONLY, O_WRONLY, and O_RDWR. The seek()/sysseek() constants SEEK_SET, SEEK_CUR, and SEEK_END are available via the C<:seek> tag. The chmod()/stat() S_IF* constants and S_IS* functions are available via the C<:mode> tag. =item File::Compare A compare_text() function has been added, which allows custom comparison functions. See L<File::Compare>. =item File::Find File::Find now works correctly when the wanted() function is either autoloaded or is a symbolic reference. A bug that caused File::Find to lose track of the working directory when pruning top-level directories has been fixed. File::Find now also supports several other options to control its behavior. It can follow symbolic links if the C<follow> option is specified. Enabling the C<no_chdir> option will make File::Find skip changing the current directory when walking directories. The C<untaint> flag can be useful when running with taint checks enabled. See L<File::Find>. =item File::Glob This extension implements BSD-style file globbing. By default, it will also be used for the internal implementation of the glob() operator. See L<File::Glob>. =item File::Spec New methods have been added to the File::Spec module: devnull() returns the name of the null device (/dev/null on Unix) and tmpdir() the name of the temp directory (normally /tmp on Unix). There are now also methods to convert between absolute and relative filenames: abs2rel() and rel2abs(). For compatibility with operating systems that specify volume names in file paths, the splitpath(), splitdir(), and catdir() methods have been added. =item File::Spec::Functions The new File::Spec::Functions modules provides a function interface to the File::Spec module. Allows shorthand $fullname = catfile($dir1, $dir2, $file); instead of $fullname = File::Spec->catfile($dir1, $dir2, $file); =item Getopt::Long Getopt::Long licensing has changed to allow the Perl Artistic License as well as the GPL. It used to be GPL only, which got in the way of non-GPL applications that wanted to use Getopt::Long. Getopt::Long encourages the use of Pod::Usage to produce help messages. For example: use Getopt::Long; use Pod::Usage; my $man = 0; my $help = 0; GetOptions('help|?' => \$help, man => \$man) or pod2usage(2); pod2usage(1) if $help; pod2usage(-exitstatus => 0, -verbose => 2) if $man; __END__ =head1 NAME sample - Using Getopt::Long and Pod::Usage =head1 SYNOPSIS sample [options] [file ...] Options: -help brief help message -man full documentation =head1 OPTIONS =over 8 =item B<-help> Print a brief help message and exits. =item B<-man> Prints the manual page and exits. =back =head1 DESCRIPTION B<This program> will read the given input file(s) and do something useful with the contents thereof. =cut See L<Pod::Usage> for details. A bug that prevented the non-option call-back <> from being specified as the first argument has been fixed. To specify the characters < and > as option starters, use ><. Note, however, that changing option starters is strongly deprecated. =item IO write() and syswrite() will now accept a single-argument form of the call, for consistency with Perl's syswrite(). You can now create a TCP-based IO::Socket::INET without forcing a connect attempt. This allows you to configure its options (like making it non-blocking) and then call connect() manually. A bug that prevented the IO::Socket::protocol() accessor from ever returning the correct value has been corrected. IO::Socket::connect now uses non-blocking IO instead of alarm() to do connect timeouts. IO::Socket::accept now uses select() instead of alarm() for doing timeouts. IO::Socket::INET->new now sets $! correctly on failure. $@ is still set for backwards compatibility. =item JPL Java Perl Lingo is now distributed with Perl. See jpl/README for more information. =item lib C<use lib> now weeds out any trailing duplicate entries. C<no lib> removes all named entries. =item Math::BigInt The bitwise operations C<<< << >>>, C<<< >> >>>, C<&>, C<|>, and C<~> are now supported on bigints. =item Math::Complex The accessor methods Re, Im, arg, abs, rho, and theta can now also act as mutators (accessor $z->Re(), mutator $z->Re(3)). The class method C<display_format> and the corresponding object method C<display_format>, in addition to accepting just one argument, now can also accept a parameter hash. Recognized keys of a parameter hash are C<"style">, which corresponds to the old one parameter case, and two new parameters: C<"format">, which is a printf()-style format string (defaults usually to C<"%.15g">, you can revert to the default by setting the format string to C<undef>) used for both parts of a complex number, and C<"polar_pretty_print"> (defaults to true), which controls whether an attempt is made to try to recognize small multiples and rationals of pi (2pi, pi/2) at the argument (angle) of a polar complex number. The potentially disruptive change is that in list context both methods now I<return the parameter hash>, instead of only the value of the C<"style"> parameter. =item Math::Trig A little bit of radial trigonometry (cylindrical and spherical), radial coordinate conversions, and the great circle distance were added. =item Pod::Parser, Pod::InputObjects Pod::Parser is a base class for parsing and selecting sections of pod documentation from an input stream. This module takes care of identifying pod paragraphs and commands in the input and hands off the parsed paragraphs and commands to user-defined methods which are free to interpret or translate them as they see fit. Pod::InputObjects defines some input objects needed by Pod::Parser, and for advanced users of Pod::Parser that need more about a command besides its name and text. As of release 5.6.0 of Perl, Pod::Parser is now the officially sanctioned "base parser code" recommended for use by all pod2xxx translators. Pod::Text (pod2text) and Pod::Man (pod2man) have already been converted to use Pod::Parser and efforts to convert Pod::HTML (pod2html) are already underway. For any questions or comments about pod parsing and translating issues and utilities, please use the pod-people@perl.org mailing list. For further information, please see L<Pod::Parser> and L<Pod::InputObjects>. =item Pod::Checker, podchecker This utility checks pod files for correct syntax, according to L<perlpod>. Obvious errors are flagged as such, while warnings are printed for mistakes that can be handled gracefully. The checklist is not complete yet. See L<Pod::Checker>. =item Pod::ParseUtils, Pod::Find These modules provide a set of gizmos that are useful mainly for pod translators. L<Pod::Find|Pod::Find> traverses directory structures and returns found pod files, along with their canonical names (like C<File::Spec::Unix>). L<Pod::ParseUtils|Pod::ParseUtils> contains B<Pod::List> (useful for storing pod list information), B<Pod::Hyperlink> (for parsing the contents of C<LE<lt>E<gt>> sequences) and B<Pod::Cache> (for caching information about pod files, e.g., link nodes). =item Pod::Select, podselect Pod::Select is a subclass of Pod::Parser which provides a function named "podselect()" to filter out user-specified sections of raw pod documentation from an input stream. podselect is a script that provides access to Pod::Select from other scripts to be used as a filter. See L<Pod::Select>. =item Pod::Usage, pod2usage Pod::Usage provides the function "pod2usage()" to print usage messages for a Perl script based on its embedded pod documentation. The pod2usage() function is generally useful to all script authors since it lets them write and maintain a single source (the pods) for documentation, thus removing the need to create and maintain redundant usage message text consisting of information already in the pods. There is also a pod2usage script which can be used from other kinds of scripts to print usage messages from pods (even for non-Perl scripts with pods embedded in comments). For details and examples, please see L<Pod::Usage>. =item Pod::Text and Pod::Man Pod::Text has been rewritten to use Pod::Parser. While pod2text() is still available for backwards compatibility, the module now has a new preferred interface. See L<Pod::Text> for the details. The new Pod::Text module is easily subclassed for tweaks to the output, and two such subclasses (Pod::Text::Termcap for man-page-style bold and underlining using termcap information, and Pod::Text::Color for markup with ANSI color sequences) are now standard. pod2man has been turned into a module, Pod::Man, which also uses Pod::Parser. In the process, several outstanding bugs related to quotes in section headers, quoting of code escapes, and nested lists have been fixed. pod2man is now a wrapper script around this module. =item SDBM_File An EXISTS method has been added to this module (and sdbm_exists() has been added to the underlying sdbm library), so one can now call exists on an SDBM_File tied hash and get the correct result, rather than a runtime error. A bug that may have caused data loss when more than one disk block happens to be read from the database in a single FETCH() has been fixed. =item Sys::Syslog Sys::Syslog now uses XSUBs to access facilities from syslog.h so it no longer requires syslog.ph to exist. =item Sys::Hostname Sys::Hostname now uses XSUBs to call the C library's gethostname() or uname() if they exist. =item Term::ANSIColor Term::ANSIColor is a very simple module to provide easy and readable access to the ANSI color and highlighting escape sequences, supported by most ANSI terminal emulators. It is now included standard. =item Time::Local The timelocal() and timegm() functions used to silently return bogus results when the date fell outside the machine's integer range. They now consistently croak() if the date falls in an unsupported range. =item Win32 The error return value in list context has been changed for all functions that return a list of values. Previously these functions returned a list with a single element C<undef> if an error occurred. Now these functions return the empty list in these situations. This applies to the following functions: Win32::FsType Win32::GetOSVersion The remaining functions are unchanged and continue to return C<undef> on error even in list context. The Win32::SetLastError(ERROR) function has been added as a complement to the Win32::GetLastError() function. The new Win32::GetFullPathName(FILENAME) returns the full absolute pathname for FILENAME in scalar context. In list context it returns a two-element list containing the fully qualified directory name and the filename. See L<Win32>. =item XSLoader The XSLoader extension is a simpler alternative to DynaLoader. See L<XSLoader>. =item DBM Filters A new feature called "DBM Filters" has been added to all the DBM modules--DB_File, GDBM_File, NDBM_File, ODBM_File, and SDBM_File. DBM Filters add four new methods to each DBM module: filter_store_key filter_store_value filter_fetch_key filter_fetch_value These can be used to filter key-value pairs before the pairs are written to the database or just after they are read from the database. See L<perldbmfilter> for further information. =back =head2 Pragmata C<use attrs> is now obsolete, and is only provided for backward-compatibility. It's been replaced by the C<sub : attributes> syntax. See L<perlsub/"Subroutine Attributes"> and L<attributes>. Lexical warnings pragma, C<use warnings;>, to control optional warnings. See L<perllexwarn>. C<use filetest> to control the behaviour of filetests (C<-r> C<-w> ...). Currently only one subpragma implemented, "use filetest 'access';", that uses access(2) or equivalent to check permissions instead of using stat(2) as usual. This matters in filesystems where there are ACLs (access control lists): the stat(2) might lie, but access(2) knows better. The C<open> pragma can be used to specify default disciplines for handle constructors (e.g. open()) and for qx//. The two pseudo-disciplines C<:raw> and C<:crlf> are currently supported on DOS-derivative platforms (i.e. where binmode is not a no-op). See also L</"binmode() can be used to set :crlf and :raw modes">. =head1 Utility Changes =head2 dprofpp C<dprofpp> is used to display profile data generated using C<Devel::DProf>. See L<dprofpp>. =head2 find2perl The C<find2perl> utility now uses the enhanced features of the File::Find module. The -depth and -follow options are supported. Pod documentation is also included in the script. =head2 h2xs The C<h2xs> tool can now work in conjunction with C<C::Scan> (available from CPAN) to automatically parse real-life header files. The C<-M>, C<-a>, C<-k>, and C<-o> options are new. =head2 perlcc C<perlcc> now supports the C and Bytecode backends. By default, it generates output from the simple C backend rather than the optimized C backend. Support for non-Unix platforms has been improved. =head2 perldoc C<perldoc> has been reworked to avoid possible security holes. It will not by default let itself be run as the superuser, but you may still use the B<-U> switch to try to make it drop privileges first. =head2 The Perl Debugger Many bug fixes and enhancements were added to F<perl5db.pl>, the Perl debugger. The help documentation was rearranged. New commands include C<< < ? >>, C<< > ? >>, and C<< { ? >> to list out current actions, C<man I<docpage>> to run your doc viewer on some perl docset, and support for quoted options. The help information was rearranged, and should be viewable once again if you're using B<less> as your pager. A serious security hole was plugged--you should immediately remove all older versions of the Perl debugger as installed in previous releases, all the way back to perl3, from your system to avoid being bitten by this. =head1 Improved Documentation Many of the platform-specific README files are now part of the perl installation. See L<perl> for the complete list. =over 4 =item perlapi.pod The official list of public Perl API functions. =item perlboot.pod A tutorial for beginners on object-oriented Perl. =item perlcompile.pod An introduction to using the Perl Compiler suite. =item perldbmfilter.pod A howto document on using the DBM filter facility. =item perldebug.pod All material unrelated to running the Perl debugger, plus all low-level guts-like details that risked crushing the casual user of the debugger, have been relocated from the old manpage to the next entry below. =item perldebguts.pod This new manpage contains excessively low-level material not related to the Perl debugger, but slightly related to debugging Perl itself. It also contains some arcane internal details of how the debugging process works that may only be of interest to developers of Perl debuggers. =item perlfork.pod Notes on the fork() emulation currently available for the Windows platform. =item perlfilter.pod An introduction to writing Perl source filters. =item perlhack.pod Some guidelines for hacking the Perl source code. =item perlintern.pod A list of internal functions in the Perl source code. (List is currently empty.) =item perllexwarn.pod Introduction and reference information about lexically scoped warning categories. =item perlnumber.pod Detailed information about numbers as they are represented in Perl. =item perlopentut.pod A tutorial on using open() effectively. =item perlreftut.pod A tutorial that introduces the essentials of references. =item perltootc.pod A tutorial on managing class data for object modules. =item perltodo.pod Discussion of the most often wanted features that may someday be supported in Perl. =item perlunicode.pod An introduction to Unicode support features in Perl. =back =head1 Performance enhancements =head2 Simple sort() using { $a <=> $b } and the like are optimized Many common sort() operations using a simple inlined block are now optimized for faster performance. =head2 Optimized assignments to lexical variables Certain operations in the RHS of assignment statements have been optimized to directly set the lexical variable on the LHS, eliminating redundant copying overheads. =head2 Faster subroutine calls Minor changes in how subroutine calls are handled internally provide marginal improvements in performance. =head2 delete(), each(), values() and hash iteration are faster The hash values returned by delete(), each(), values() and hashes in a list context are the actual values in the hash, instead of copies. This results in significantly better performance, because it eliminates needless copying in most situations. =head1 Installation and Configuration Improvements =head2 -Dusethreads means something different The -Dusethreads flag now enables the experimental interpreter-based thread support by default. To get the flavor of experimental threads that was in 5.005 instead, you need to run Configure with "-Dusethreads -Duse5005threads". As of v5.6.0, interpreter-threads support is still lacking a way to create new threads from Perl (i.e., C<use Thread;> will not work with interpreter threads). C<use Thread;> continues to be available when you specify the -Duse5005threads option to Configure, bugs and all. NOTE: Support for threads continues to be an experimental feature. Interfaces and implementation are subject to sudden and drastic changes. =head2 New Configure flags The following new flags may be enabled on the Configure command line by running Configure with C<-Dflag>. usemultiplicity usethreads useithreads (new interpreter threads: no Perl API yet) usethreads use5005threads (threads as they were in 5.005) use64bitint (equal to now deprecated 'use64bits') use64bitall uselongdouble usemorebits uselargefiles usesocks (only SOCKS v5 supported) =head2 Threadedness and 64-bitness now more daring The Configure options enabling the use of threads and the use of 64-bitness are now more daring in the sense that they no more have an explicit list of operating systems of known threads/64-bit capabilities. In other words: if your operating system has the necessary APIs and datatypes, you should be able just to go ahead and use them, for threads by Configure -Dusethreads, and for 64 bits either explicitly by Configure -Duse64bitint or implicitly if your system has 64-bit wide datatypes. See also L</"64-bit support">. =head2 Long Doubles Some platforms have "long doubles", floating point numbers of even larger range than ordinary "doubles". To enable using long doubles for Perl's scalars, use -Duselongdouble. =head2 -Dusemorebits You can enable both -Duse64bitint and -Duselongdouble with -Dusemorebits. See also L</"64-bit support">. =head2 -Duselargefiles Some platforms support system APIs that are capable of handling large files (typically, files larger than two gigabytes). Perl will try to use these APIs if you ask for -Duselargefiles. See L</"Large file support"> for more information. =head2 installusrbinperl You can use "Configure -Uinstallusrbinperl" which causes installperl to skip installing perl also as /usr/bin/perl. This is useful if you prefer not to modify /usr/bin for some reason or another but harmful because many scripts assume to find Perl in /usr/bin/perl. =head2 SOCKS support You can use "Configure -Dusesocks" which causes Perl to probe for the SOCKS proxy protocol library (v5, not v4). For more information on SOCKS, see: http://www.socks.nec.com/ =head2 C<-A> flag You can "post-edit" the Configure variables using the Configure C<-A> switch. The editing happens immediately after the platform specific hints files have been processed but before the actual configuration process starts. Run C<Configure -h> to find out the full C<-A> syntax. =head2 Enhanced Installation Directories The installation structure has been enriched to improve the support for maintaining multiple versions of perl, to provide locations for vendor-supplied modules, scripts, and manpages, and to ease maintenance of locally-added modules, scripts, and manpages. See the section on Installation Directories in the INSTALL file for complete details. For most users building and installing from source, the defaults should be fine. If you previously used C<Configure -Dsitelib> or C<-Dsitearch> to set special values for library directories, you might wish to consider using the new C<-Dsiteprefix> setting instead. Also, if you wish to re-use a config.sh file from an earlier version of perl, you should be sure to check that Configure makes sensible choices for the new directories. See INSTALL for complete details. =head1 Platform specific changes =head2 Supported platforms =over 4 =item * The Mach CThreads (NEXTSTEP, OPENSTEP) are now supported by the Thread extension. =item * GNU/Hurd is now supported. =item * Rhapsody/Darwin is now supported. =item * EPOC is now supported (on Psion 5). =item * The cygwin port (formerly cygwin32) has been greatly improved. =back =head2 DOS =over 4 =item * Perl now works with djgpp 2.02 (and 2.03 alpha). =item * Environment variable names are not converted to uppercase any more. =item * Incorrect exit codes from backticks have been fixed. =item * This port continues to use its own builtin globbing (not File::Glob). =back =head2 OS390 (OpenEdition MVS) Support for this EBCDIC platform has not been renewed in this release. There are difficulties in reconciling Perl's standardization on UTF-8 as its internal representation for characters with the EBCDIC character set, because the two are incompatible. It is unclear whether future versions will renew support for this platform, but the possibility exists. =head2 VMS Numerous revisions and extensions to configuration, build, testing, and installation process to accommodate core changes and VMS-specific options. Expand %ENV-handling code to allow runtime mapping to logical names, CLI symbols, and CRTL environ array. Extension of subprocess invocation code to accept filespecs as command "verbs". Add to Perl command line processing the ability to use default file types and to recognize Unix-style C<2E<gt>&1>. Expansion of File::Spec::VMS routines, and integration into ExtUtils::MM_VMS. Extension of ExtUtils::MM_VMS to handle complex extensions more flexibly. Barewords at start of Unix-syntax paths may be treated as text rather than only as logical names. Optional secure translation of several logical names used internally by Perl. Miscellaneous bugfixing and porting of new core code to VMS. Thanks are gladly extended to the many people who have contributed VMS patches, testing, and ideas. =head2 Win32 Perl can now emulate fork() internally, using multiple interpreters running in different concurrent threads. This support must be enabled at build time. See L<perlfork> for detailed information. When given a pathname that consists only of a drivename, such as C<A:>, opendir() and stat() now use the current working directory for the drive rather than the drive root. The builtin XSUB functions in the Win32:: namespace are documented. See L<Win32>. $^X now contains the full path name of the running executable. A Win32::GetLongPathName() function is provided to complement Win32::GetFullPathName() and Win32::GetShortPathName(). See L<Win32>. POSIX::uname() is supported. system(1,...) now returns true process IDs rather than process handles. kill() accepts any real process id, rather than strictly return values from system(1,...). For better compatibility with Unix, C<kill(0, $pid)> can now be used to test whether a process exists. The C<Shell> module is supported. Better support for building Perl under command.com in Windows 95 has been added. Scripts are read in binary mode by default to allow ByteLoader (and the filter mechanism in general) to work properly. For compatibility, the DATA filehandle will be set to text mode if a carriage return is detected at the end of the line containing the __END__ or __DATA__ token; if not, the DATA filehandle will be left open in binary mode. Earlier versions always opened the DATA filehandle in text mode. The glob() operator is implemented via the C<File::Glob> extension, which supports glob syntax of the C shell. This increases the flexibility of the glob() operator, but there may be compatibility issues for programs that relied on the older globbing syntax. If you want to preserve compatibility with the older syntax, you might want to run perl with C<-MFile::DosGlob>. For details and compatibility information, see L<File::Glob>. =head1 Significant bug fixes =head2 <HANDLE> on empty files With C<$/> set to C<undef>, "slurping" an empty file returns a string of zero length (instead of C<undef>, as it used to) the first time the HANDLE is read after C<$/> is set to C<undef>. Further reads yield C<undef>. This means that the following will append "foo" to an empty file (it used to do nothing): perl -0777 -pi -e 's/^/foo/' empty_file The behaviour of: perl -pi -e 's/^/foo/' empty_file is unchanged (it continues to leave the file empty). =head2 C<eval '...'> improvements Line numbers (as reflected by caller() and most diagnostics) within C<eval '...'> were often incorrect where here documents were involved. This has been corrected. Lexical lookups for variables appearing in C<eval '...'> within functions that were themselves called within an C<eval '...'> were searching the wrong place for lexicals. The lexical search now correctly ends at the subroutine's block boundary. The use of C<return> within C<eval {...}> caused $@ not to be reset correctly when no exception occurred within the eval. This has been fixed. Parsing of here documents used to be flawed when they appeared as the replacement expression in C<eval 's/.../.../e'>. This has been fixed. =head2 All compilation errors are true errors Some "errors" encountered at compile time were by necessity generated as warnings followed by eventual termination of the program. This enabled more such errors to be reported in a single run, rather than causing a hard stop at the first error that was encountered. The mechanism for reporting such errors has been reimplemented to queue compile-time errors and report them at the end of the compilation as true errors rather than as warnings. This fixes cases where error messages leaked through in the form of warnings when code was compiled at run time using C<eval STRING>, and also allows such errors to be reliably trapped using C<eval "...">. =head2 Implicitly closed filehandles are safer Sometimes implicitly closed filehandles (as when they are localized, and Perl automatically closes them on exiting the scope) could inadvertently set $? or $!. This has been corrected. =head2 Behavior of list slices is more consistent When taking a slice of a literal list (as opposed to a slice of an array or hash), Perl used to return an empty list if the result happened to be composed of all undef values. The new behavior is to produce an empty list if (and only if) the original list was empty. Consider the following example: @a = (1,undef,undef,2)[2,1,2]; The old behavior would have resulted in @a having no elements. The new behavior ensures it has three undefined elements. Note in particular that the behavior of slices of the following cases remains unchanged: @a = ()[1,2]; @a = (getpwent)[7,0]; @a = (anything_returning_empty_list())[2,1,2]; @a = @b[2,1,2]; @a = @c{'a','b','c'}; See L<perldata>. =head2 C<(\$)> prototype and C<$foo{a}> A scalar reference prototype now correctly allows a hash or array element in that slot. =head2 C<goto &sub> and AUTOLOAD The C<goto &sub> construct works correctly when C<&sub> happens to be autoloaded. =head2 C<-bareword> allowed under C<use integer> The autoquoting of barewords preceded by C<-> did not work in prior versions when the C<integer> pragma was enabled. This has been fixed. =head2 Failures in DESTROY() When code in a destructor threw an exception, it went unnoticed in earlier versions of Perl, unless someone happened to be looking in $@ just after the point the destructor happened to run. Such failures are now visible as warnings when warnings are enabled. =head2 Locale bugs fixed printf() and sprintf() previously reset the numeric locale back to the default "C" locale. This has been fixed. Numbers formatted according to the local numeric locale (such as using a decimal comma instead of a decimal dot) caused "isn't numeric" warnings, even while the operations accessing those numbers produced correct results. These warnings have been discontinued. =head2 Memory leaks The C<eval 'return sub {...}'> construct could sometimes leak memory. This has been fixed. Operations that aren't filehandle constructors used to leak memory when used on invalid filehandles. This has been fixed. Constructs that modified C<@_> could fail to deallocate values in C<@_> and thus leak memory. This has been corrected. =head2 Spurious subroutine stubs after failed subroutine calls Perl could sometimes create empty subroutine stubs when a subroutine was not found in the package. Such cases stopped later method lookups from progressing into base packages. This has been corrected. =head2 Taint failures under C<-U> When running in unsafe mode, taint violations could sometimes cause silent failures. This has been fixed. =head2 END blocks and the C<-c> switch Prior versions used to run BEGIN B<and> END blocks when Perl was run in compile-only mode. Since this is typically not the expected behavior, END blocks are not executed anymore when the C<-c> switch is used, or if compilation fails. See L</"Support for CHECK blocks"> for how to run things when the compile phase ends. =head2 Potential to leak DATA filehandles Using the C<__DATA__> token creates an implicit filehandle to the file that contains the token. It is the program's responsibility to close it when it is done reading from it. This caveat is now better explained in the documentation. See L<perldata>. =head1 New or Changed Diagnostics =over 4 =item "%s" variable %s masks earlier declaration in same %s (W misc) A "my" or "our" variable has been redeclared in the current scope or statement, effectively eliminating all access to the previous instance. This is almost always a typographical error. Note that the earlier variable will still exist until the end of the scope or until all closure referents to it are destroyed. =item "my sub" not yet implemented (F) Lexically scoped subroutines are not yet implemented. Don't try that yet. =item "our" variable %s redeclared (W misc) You seem to have already declared the same global once before in the current lexical scope. =item '!' allowed only after types %s (F) The '!' is allowed in pack() and unpack() only after certain types. See L<perlfunc/pack>. =item / cannot take a count (F) You had an unpack template indicating a counted-length string, but you have also specified an explicit size for the string. See L<perlfunc/pack>. =item / must be followed by a, A or Z (F) You had an unpack template indicating a counted-length string, which must be followed by one of the letters a, A or Z to indicate what sort of string is to be unpacked. See L<perlfunc/pack>. =item / must be followed by a*, A* or Z* (F) You had a pack template indicating a counted-length string, Currently the only things that can have their length counted are a*, A* or Z*. See L<perlfunc/pack>. =item / must follow a numeric type (F) You had an unpack template that contained a '#', but this did not follow some numeric unpack specification. See L<perlfunc/pack>. =item /%s/: Unrecognized escape \\%c passed through (W regexp) You used a backslash-character combination which is not recognized by Perl. This combination appears in an interpolated variable or a C<'>-delimited regular expression. The character was understood literally. =item /%s/: Unrecognized escape \\%c in character class passed through (W regexp) You used a backslash-character combination which is not recognized by Perl inside character classes. The character was understood literally. =item /%s/ should probably be written as "%s" (W syntax) You have used a pattern where Perl expected to find a string, as in the first argument to C<join>. Perl will treat the true or false result of matching the pattern against $_ as the string, which is probably not what you had in mind. =item %s() called too early to check prototype (W prototype) You've called a function that has a prototype before the parser saw a definition or declaration for it, and Perl could not check that the call conforms to the prototype. You need to either add an early prototype declaration for the subroutine in question, or move the subroutine definition ahead of the call to get proper prototype checking. Alternatively, if you are certain that you're calling the function correctly, you may put an ampersand before the name to avoid the warning. See L<perlsub>. =item %s argument is not a HASH or ARRAY element (F) The argument to exists() must be a hash or array element, such as: $foo{$bar} $ref->{"susie"}[12] =item %s argument is not a HASH or ARRAY element or slice (F) The argument to delete() must be either a hash or array element, such as: $foo{$bar} $ref->{"susie"}[12] or a hash or array slice, such as: @foo[$bar, $baz, $xyzzy] @{$ref->[12]}{"susie", "queue"} =item %s argument is not a subroutine name (F) The argument to exists() for C<exists &sub> must be a subroutine name, and not a subroutine call. C<exists &sub()> will generate this error. =item %s package attribute may clash with future reserved word: %s (W reserved) A lowercase attribute name was used that had a package-specific handler. That name might have a meaning to Perl itself some day, even though it doesn't yet. Perhaps you should use a mixed-case attribute name, instead. See L<attributes>. =item (in cleanup) %s (W misc) This prefix usually indicates that a DESTROY() method raised the indicated exception. Since destructors are usually called by the system at arbitrary points during execution, and often a vast number of times, the warning is issued only once for any number of failures that would otherwise result in the same message being repeated. Failure of user callbacks dispatched using the C<G_KEEPERR> flag could also result in this warning. See L<perlcall/G_KEEPERR>. =item <> should be quotes (F) You wrote C<< require <file> >> when you should have written C<require 'file'>. =item Attempt to join self (F) You tried to join a thread from within itself, which is an impossible task. You may be joining the wrong thread, or you may need to move the join() to some other thread. =item Bad evalled substitution pattern (F) You've used the /e switch to evaluate the replacement for a substitution, but perl found a syntax error in the code to evaluate, most likely an unexpected right brace '}'. =item Bad realloc() ignored (S) An internal routine called realloc() on something that had never been malloc()ed in the first place. Mandatory, but can be disabled by setting environment variable C<PERL_BADFREE> to 1. =item Bareword found in conditional (W bareword) The compiler found a bareword where it expected a conditional, which often indicates that an || or && was parsed as part of the last argument of the previous construct, for example: open FOO || die; It may also indicate a misspelled constant that has been interpreted as a bareword: use constant TYPO => 1; if (TYOP) { print "foo" } The C<strict> pragma is useful in avoiding such errors. =item Binary number > 0b11111111111111111111111111111111 non-portable (W portable) The binary number you specified is larger than 2**32-1 (4294967295) and therefore non-portable between systems. See L<perlport> for more on portability concerns. =item Bit vector size > 32 non-portable (W portable) Using bit vector sizes larger than 32 is non-portable. =item Buffer overflow in prime_env_iter: %s (W internal) A warning peculiar to VMS. While Perl was preparing to iterate over %ENV, it encountered a logical name or symbol definition which was too long, so it was truncated to the string shown. =item Can't check filesystem of script "%s" (P) For some reason you can't check the filesystem of the script for nosuid. =item Can't declare class for non-scalar %s in "%s" (S) Currently, only scalar variables can declared with a specific class qualifier in a "my" or "our" declaration. The semantics may be extended for other types of variables in future. =item Can't declare %s in "%s" (F) Only scalar, array, and hash variables may be declared as "my" or "our" variables. They must have ordinary identifiers as names. =item Can't ignore signal CHLD, forcing to default (W signal) Perl has detected that it is being run with the SIGCHLD signal (sometimes known as SIGCLD) disabled. Since disabling this signal will interfere with proper determination of exit status of child processes, Perl has reset the signal to its default value. This situation typically indicates that the parent program under which Perl may be running (e.g., cron) is being very careless. =item Can't modify non-lvalue subroutine call (F) Subroutines meant to be used in lvalue context should be declared as such, see L<perlsub/"Lvalue subroutines">. =item Can't read CRTL environ (S) A warning peculiar to VMS. Perl tried to read an element of %ENV from the CRTL's internal environment array and discovered the array was missing. You need to figure out where your CRTL misplaced its environ or define F<PERL_ENV_TABLES> (see L<perlvms>) so that environ is not searched. =item Can't remove %s: %s, skipping file (S) You requested an inplace edit without creating a backup file. Perl was unable to remove the original file to replace it with the modified file. The file was left unmodified. =item Can't return %s from lvalue subroutine (F) Perl detected an attempt to return illegal lvalues (such as temporary or readonly values) from a subroutine used as an lvalue. This is not allowed. =item Can't weaken a nonreference (F) You attempted to weaken something that was not a reference. Only references can be weakened. =item Character class [:%s:] unknown (F) The class in the character class [: :] syntax is unknown. See L<perlre>. =item Character class syntax [%s] belongs inside character classes (W unsafe) The character class constructs [: :], [= =], and [. .] go I<inside> character classes, the [] are part of the construct, for example: /[012[:alpha:]345]/. Note that [= =] and [. .] are not currently implemented; they are simply placeholders for future extensions. =item Constant is not %s reference (F) A constant value (perhaps declared using the C<use constant> pragma) is being dereferenced, but it amounts to the wrong type of reference. The message indicates the type of reference that was expected. This usually indicates a syntax error in dereferencing the constant value. See L<perlsub/"Constant Functions"> and L<constant>. =item constant(%s): %s (F) The parser found inconsistencies either while attempting to define an overloaded constant, or when trying to find the character name specified in the C<\N{...}> escape. Perhaps you forgot to load the corresponding C<overload> or C<charnames> pragma? See L<charnames> and L<overload>. =item CORE::%s is not a keyword (F) The CORE:: namespace is reserved for Perl keywords. =item defined(@array) is deprecated (D) defined() is not usually useful on arrays because it checks for an undefined I<scalar> value. If you want to see if the array is empty, just use C<if (@array) { # not empty }> for example. =item defined(%hash) is deprecated (D) defined() is not usually useful on hashes because it checks for an undefined I<scalar> value. If you want to see if the hash is empty, just use C<if (%hash) { # not empty }> for example. =item Did not produce a valid header See Server error. =item (Did you mean "local" instead of "our"?) (W misc) Remember that "our" does not localize the declared global variable. You have declared it again in the same lexical scope, which seems superfluous. =item Document contains no data See Server error. =item entering effective %s failed (F) While under the C<use filetest> pragma, switching the real and effective uids or gids failed. =item false [] range "%s" in regexp (W regexp) A character class range must start and end at a literal character, not another character class like C<\d> or C<[:alpha:]>. The "-" in your false range is interpreted as a literal "-". Consider quoting the "-", "\-". See L<perlre>. =item Filehandle %s opened only for output (W io) You tried to read from a filehandle opened only for writing. If you intended it to be a read/write filehandle, you needed to open it with "+<" or "+>" or "+>>" instead of with "<" or nothing. If you intended only to read from the file, use "<". See L<perlfunc/open>. =item flock() on closed filehandle %s (W closed) The filehandle you're attempting to flock() got itself closed some time before now. Check your logic flow. flock() operates on filehandles. Are you attempting to call flock() on a dirhandle by the same name? =item Global symbol "%s" requires explicit package name (F) You've said "use strict vars", which indicates that all variables must either be lexically scoped (using "my"), declared beforehand using "our", or explicitly qualified to say which package the global variable is in (using "::"). =item Hexadecimal number > 0xffffffff non-portable (W portable) The hexadecimal number you specified is larger than 2**32-1 (4294967295) and therefore non-portable between systems. See L<perlport> for more on portability concerns. =item Ill-formed CRTL environ value "%s" (W internal) A warning peculiar to VMS. Perl tried to read the CRTL's internal environ array, and encountered an element without the C<=> delimiter used to separate keys from values. The element is ignored. =item Ill-formed message in prime_env_iter: |%s| (W internal) A warning peculiar to VMS. Perl tried to read a logical name or CLI symbol definition when preparing to iterate over %ENV, and didn't see the expected delimiter between key and value, so the line was ignored. =item Illegal binary digit %s (F) You used a digit other than 0 or 1 in a binary number. =item Illegal binary digit %s ignored (W digit) You may have tried to use a digit other than 0 or 1 in a binary number. Interpretation of the binary number stopped before the offending digit. =item Illegal number of bits in vec (F) The number of bits in vec() (the third argument) must be a power of two from 1 to 32 (or 64, if your platform supports that). =item Integer overflow in %s number (W overflow) The hexadecimal, octal or binary number you have specified either as a literal or as an argument to hex() or oct() is too big for your architecture, and has been converted to a floating point number. On a 32-bit architecture the largest hexadecimal, octal or binary number representable without overflow is 0xFFFFFFFF, 037777777777, or 0b11111111111111111111111111111111 respectively. Note that Perl transparently promotes all numbers to a floating point representation internally--subject to loss of precision errors in subsequent operations. =item Invalid %s attribute: %s The indicated attribute for a subroutine or variable was not recognized by Perl or by a user-supplied handler. See L<attributes>. =item Invalid %s attributes: %s The indicated attributes for a subroutine or variable were not recognized by Perl or by a user-supplied handler. See L<attributes>. =item invalid [] range "%s" in regexp The offending range is now explicitly displayed. =item Invalid separator character %s in attribute list (F) Something other than a colon or whitespace was seen between the elements of an attribute list. If the previous attribute had a parenthesised parameter list, perhaps that list was terminated too soon. See L<attributes>. =item Invalid separator character %s in subroutine attribute list (F) Something other than a colon or whitespace was seen between the elements of a subroutine attribute list. If the previous attribute had a parenthesised parameter list, perhaps that list was terminated too soon. =item leaving effective %s failed (F) While under the C<use filetest> pragma, switching the real and effective uids or gids failed. =item Lvalue subs returning %s not implemented yet (F) Due to limitations in the current implementation, array and hash values cannot be returned in subroutines used in lvalue context. See L<perlsub/"Lvalue subroutines">. =item Method %s not permitted See Server error. =item Missing %sbrace%s on \N{} (F) Wrong syntax of character name literal C<\N{charname}> within double-quotish context. =item Missing command in piped open (W pipe) You used the C<open(FH, "| command")> or C<open(FH, "command |")> construction, but the command was missing or blank. =item Missing name in "my sub" (F) The reserved syntax for lexically scoped subroutines requires that they have a name with which they can be found. =item No %s specified for -%c (F) The indicated command line switch needs a mandatory argument, but you haven't specified one. =item No package name allowed for variable %s in "our" (F) Fully qualified variable names are not allowed in "our" declarations, because that doesn't make much sense under existing semantics. Such syntax is reserved for future extensions. =item No space allowed after -%c (F) The argument to the indicated command line switch must follow immediately after the switch, without intervening spaces. =item no UTC offset information; assuming local time is UTC (S) A warning peculiar to VMS. Perl was unable to find the local timezone offset, so it's assuming that local system time is equivalent to UTC. If it's not, define the logical name F<SYS$TIMEZONE_DIFFERENTIAL> to translate to the number of seconds which need to be added to UTC to get local time. =item Octal number > 037777777777 non-portable (W portable) The octal number you specified is larger than 2**32-1 (4294967295) and therefore non-portable between systems. See L<perlport> for more on portability concerns. See also L<perlport> for writing portable code. =item panic: del_backref (P) Failed an internal consistency check while trying to reset a weak reference. =item panic: kid popen errno read (F) forked child returned an incomprehensible message about its errno. =item panic: magic_killbackrefs (P) Failed an internal consistency check while trying to reset all weak references to an object. =item Parentheses missing around "%s" list (W parenthesis) You said something like my $foo, $bar = @_; when you meant my ($foo, $bar) = @_; Remember that "my", "our", and "local" bind tighter than comma. =item Possible unintended interpolation of %s in string (W ambiguous) It used to be that Perl would try to guess whether you wanted an array interpolated or a literal @. It no longer does this; arrays are now I<always> interpolated into strings. This means that if you try something like: print "fred@example.com"; and the array C<@example> doesn't exist, Perl is going to print C<fred.com>, which is probably not what you wanted. To get a literal C<@> sign in a string, put a backslash before it, just as you would to get a literal C<$> sign. =item Possible Y2K bug: %s (W y2k) You are concatenating the number 19 with another number, which could be a potential Year 2000 problem. =item pragma "attrs" is deprecated, use "sub NAME : ATTRS" instead (W deprecated) You have written something like this: sub doit { use attrs qw(locked); } You should use the new declaration syntax instead. sub doit : locked { ... The C<use attrs> pragma is now obsolete, and is only provided for backward-compatibility. See L<perlsub/"Subroutine Attributes">. =item Premature end of script headers See Server error. =item Repeat count in pack overflows (F) You can't specify a repeat count so large that it overflows your signed integers. See L<perlfunc/pack>. =item Repeat count in unpack overflows (F) You can't specify a repeat count so large that it overflows your signed integers. See L<perlfunc/unpack>. =item realloc() of freed memory ignored (S) An internal routine called realloc() on something that had already been freed. =item Reference is already weak (W misc) You have attempted to weaken a reference that is already weak. Doing so has no effect. =item setpgrp can't take arguments (F) Your system has the setpgrp() from BSD 4.2, which takes no arguments, unlike POSIX setpgid(), which takes a process ID and process group ID. =item Strange *+?{} on zero-length expression (W regexp) You applied a regular expression quantifier in a place where it makes no sense, such as on a zero-width assertion. Try putting the quantifier inside the assertion instead. For example, the way to match "abc" provided that it is followed by three repetitions of "xyz" is C</abc(?=(?:xyz){3})/>, not C</abc(?=xyz){3}/>. =item switching effective %s is not implemented (F) While under the C<use filetest> pragma, we cannot switch the real and effective uids or gids. =item This Perl can't reset CRTL environ elements (%s) =item This Perl can't set CRTL environ elements (%s=%s) (W internal) Warnings peculiar to VMS. You tried to change or delete an element of the CRTL's internal environ array, but your copy of Perl wasn't built with a CRTL that contained the setenv() function. You'll need to rebuild Perl with a CRTL that does, or redefine F<PERL_ENV_TABLES> (see L<perlvms>) so that the environ array isn't the target of the change to %ENV which produced the warning. =item Too late to run %s block (W void) A CHECK or INIT block is being defined during run time proper, when the opportunity to run them has already passed. Perhaps you are loading a file with C<require> or C<do> when you should be using C<use> instead. Or perhaps you should put the C<require> or C<do> inside a BEGIN block. =item Unknown open() mode '%s' (F) The second argument of 3-argument open() is not among the list of valid modes: C<< < >>, C<< > >>, C<<< >> >>>, C<< +< >>, C<< +> >>, C<<< +>> >>>, C<-|>, C<|->. =item Unknown process %x sent message to prime_env_iter: %s (P) An error peculiar to VMS. Perl was reading values for %ENV before iterating over it, and someone else stuck a message in the stream of data Perl expected. Someone's very confused, or perhaps trying to subvert Perl's population of %ENV for nefarious purposes. =item Unrecognized escape \\%c passed through (W misc) You used a backslash-character combination which is not recognized by Perl. The character was understood literally. =item Unterminated attribute parameter in attribute list (F) The lexer saw an opening (left) parenthesis character while parsing an attribute list, but the matching closing (right) parenthesis character was not found. You may need to add (or remove) a backslash character to get your parentheses to balance. See L<attributes>. =item Unterminated attribute list (F) The lexer found something other than a simple identifier at the start of an attribute, and it wasn't a semicolon or the start of a block. Perhaps you terminated the parameter list of the previous attribute too soon. See L<attributes>. =item Unterminated attribute parameter in subroutine attribute list (F) The lexer saw an opening (left) parenthesis character while parsing a subroutine attribute list, but the matching closing (right) parenthesis character was not found. You may need to add (or remove) a backslash character to get your parentheses to balance. =item Unterminated subroutine attribute list (F) The lexer found something other than a simple identifier at the start of a subroutine attribute, and it wasn't a semicolon or the start of a block. Perhaps you terminated the parameter list of the previous attribute too soon. =item Value of CLI symbol "%s" too long (W misc) A warning peculiar to VMS. Perl tried to read the value of an %ENV element from a CLI symbol table, and found a resultant string longer than 1024 characters. The return value has been truncated to 1024 characters. =item Version number must be a constant number (P) The attempt to translate a C<use Module n.n LIST> statement into its equivalent C<BEGIN> block found an internal inconsistency with the version number. =back =head1 New tests =over 4 =item lib/attrs Compatibility tests for C<sub : attrs> vs the older C<use attrs>. =item lib/env Tests for new environment scalar capability (e.g., C<use Env qw($BAR);>). =item lib/env-array Tests for new environment array capability (e.g., C<use Env qw(@PATH);>). =item lib/io_const IO constants (SEEK_*, _IO*). =item lib/io_dir Directory-related IO methods (new, read, close, rewind, tied delete). =item lib/io_multihomed INET sockets with multi-homed hosts. =item lib/io_poll IO poll(). =item lib/io_unix UNIX sockets. =item op/attrs Regression tests for C<my ($x,@y,%z) : attrs> and <sub : attrs>. =item op/filetest File test operators. =item op/lex_assign Verify operations that access pad objects (lexicals and temporaries). =item op/exists_sub Verify C<exists &sub> operations. =back =head1 Incompatible Changes =head2 Perl Source Incompatibilities Beware that any new warnings that have been added or old ones that have been enhanced are B<not> considered incompatible changes. Since all new warnings must be explicitly requested via the C<-w> switch or the C<warnings> pragma, it is ultimately the programmer's responsibility to ensure that warnings are enabled judiciously. =over 4 =item CHECK is a new keyword All subroutine definitions named CHECK are now special. See C</"Support for CHECK blocks"> for more information. =item Treatment of list slices of undef has changed There is a potential incompatibility in the behavior of list slices that are comprised entirely of undefined values. See L</"Behavior of list slices is more consistent">. =item Format of $English::PERL_VERSION is different The English module now sets $PERL_VERSION to $^V (a string value) rather than C<$]> (a numeric value). This is a potential incompatibility. Send us a report via perlbug if you are affected by this. See L</"Improved Perl version numbering system"> for the reasons for this change. =item Literals of the form C<1.2.3> parse differently Previously, numeric literals with more than one dot in them were interpreted as a floating point number concatenated with one or more numbers. Such "numbers" are now parsed as strings composed of the specified ordinals. For example, C<print 97.98.99> used to output C<97.9899> in earlier versions, but now prints C<abc>. See L</"Support for strings represented as a vector of ordinals">. =item Possibly changed pseudo-random number generator Perl programs that depend on reproducing a specific set of pseudo-random numbers may now produce different output due to improvements made to the rand() builtin. You can use C<sh Configure -Drandfunc=rand> to obtain the old behavior. See L</"Better pseudo-random number generator">. =item Hashing function for hash keys has changed Even though Perl hashes are not order preserving, the apparently random order encountered when iterating on the contents of a hash is actually determined by the hashing algorithm used. Improvements in the algorithm may yield a random order that is B<different> from that of previous versions, especially when iterating on hashes. See L</"Better worst-case behavior of hashes"> for additional information. =item C<undef> fails on read only values Using the C<undef> operator on a readonly value (such as $1) has the same effect as assigning C<undef> to the readonly value--it throws an exception. =item Close-on-exec bit may be set on pipe and socket handles Pipe and socket handles are also now subject to the close-on-exec behavior determined by the special variable $^F. See L</"More consistent close-on-exec behavior">. =item Writing C<"$$1"> to mean C<"${$}1"> is unsupported Perl 5.004 deprecated the interpretation of C<$$1> and similar within interpolated strings to mean C<$$ . "1">, but still allowed it. In Perl 5.6.0 and later, C<"$$1"> always means C<"${$1}">. =item delete(), each(), values() and C<\(%h)> operate on aliases to values, not copies delete(), each(), values() and hashes (e.g. C<\(%h)>) in a list context return the actual values in the hash, instead of copies (as they used to in earlier versions). Typical idioms for using these constructs copy the returned values, but this can make a significant difference when creating references to the returned values. Keys in the hash are still returned as copies when iterating on a hash. See also L</"delete(), each(), values() and hash iteration are faster">. =item vec(EXPR,OFFSET,BITS) enforces powers-of-two BITS vec() generates a run-time error if the BITS argument is not a valid power-of-two integer. =item Text of some diagnostic output has changed Most references to internal Perl operations in diagnostics have been changed to be more descriptive. This may be an issue for programs that may incorrectly rely on the exact text of diagnostics for proper functioning. =item C<%@> has been removed The undocumented special variable C<%@> that used to accumulate "background" errors (such as those that happen in DESTROY()) has been removed, because it could potentially result in memory leaks. =item Parenthesized not() behaves like a list operator The C<not> operator now falls under the "if it looks like a function, it behaves like a function" rule. As a result, the parenthesized form can be used with C<grep> and C<map>. The following construct used to be a syntax error before, but it works as expected now: grep not($_), @things; On the other hand, using C<not> with a literal list slice may not work. The following previously allowed construct: print not (1,2,3)[0]; needs to be written with additional parentheses now: print not((1,2,3)[0]); The behavior remains unaffected when C<not> is not followed by parentheses. =item Semantics of bareword prototype C<(*)> have changed The semantics of the bareword prototype C<*> have changed. Perl 5.005 always coerced simple scalar arguments to a typeglob, which wasn't useful in situations where the subroutine must distinguish between a simple scalar and a typeglob. The new behavior is to not coerce bareword arguments to a typeglob. The value will always be visible as either a simple scalar or as a reference to a typeglob. See L</"More functional bareword prototype (*)">. =item Semantics of bit operators may have changed on 64-bit platforms If your platform is either natively 64-bit or if Perl has been configured to used 64-bit integers, i.e., $Config{ivsize} is 8, there may be a potential incompatibility in the behavior of bitwise numeric operators (& | ^ ~ << >>). These operators used to strictly operate on the lower 32 bits of integers in previous versions, but now operate over the entire native integral width. In particular, note that unary C<~> will produce different results on platforms that have different $Config{ivsize}. For portability, be sure to mask off the excess bits in the result of unary C<~>, e.g., C<~$x & 0xffffffff>. See L</"Bit operators support full native integer width">. =item More builtins taint their results As described in L</"Improved security features">, there may be more sources of taint in a Perl program. To avoid these new tainting behaviors, you can build Perl with the Configure option C<-Accflags=-DINCOMPLETE_TAINTS>. Beware that the ensuing perl binary may be insecure. =back =head2 C Source Incompatibilities =over 4 =item C<PERL_POLLUTE> Release 5.005 grandfathered old global symbol names by providing preprocessor macros for extension source compatibility. As of release 5.6.0, these preprocessor definitions are not available by default. You need to explicitly compile perl with C<-DPERL_POLLUTE> to get these definitions. For extensions still using the old symbols, this option can be specified via MakeMaker: perl Makefile.PL POLLUTE=1 =item C<PERL_IMPLICIT_CONTEXT> This new build option provides a set of macros for all API functions such that an implicit interpreter/thread context argument is passed to every API function. As a result of this, something like C<sv_setsv(foo,bar)> amounts to a macro invocation that actually translates to something like C<Perl_sv_setsv(my_perl,foo,bar)>. While this is generally expected to not have any significant source compatibility issues, the difference between a macro and a real function call will need to be considered. This means that there B<is> a source compatibility issue as a result of this if your extensions attempt to use pointers to any of the Perl API functions. Note that the above issue is not relevant to the default build of Perl, whose interfaces continue to match those of prior versions (but subject to the other options described here). See L<perlguts/Background and PERL_IMPLICIT_CONTEXT> for detailed information on the ramifications of building Perl with this option. NOTE: PERL_IMPLICIT_CONTEXT is automatically enabled whenever Perl is built with one of -Dusethreads, -Dusemultiplicity, or both. It is not intended to be enabled by users at this time. =item C<PERL_POLLUTE_MALLOC> Enabling Perl's malloc in release 5.005 and earlier caused the namespace of the system's malloc family of functions to be usurped by the Perl versions, since by default they used the same names. Besides causing problems on platforms that do not allow these functions to be cleanly replaced, this also meant that the system versions could not be called in programs that used Perl's malloc. Previous versions of Perl have allowed this behaviour to be suppressed with the HIDEMYMALLOC and EMBEDMYMALLOC preprocessor definitions. As of release 5.6.0, Perl's malloc family of functions have default names distinct from the system versions. You need to explicitly compile perl with C<-DPERL_POLLUTE_MALLOC> to get the older behaviour. HIDEMYMALLOC and EMBEDMYMALLOC have no effect, since the behaviour they enabled is now the default. Note that these functions do B<not> constitute Perl's memory allocation API. See L<perlguts/"Memory Allocation"> for further information about that. =back =head2 Compatible C Source API Changes =over 4 =item C<PATCHLEVEL> is now C<PERL_VERSION> The cpp macros C<PERL_REVISION>, C<PERL_VERSION>, and C<PERL_SUBVERSION> are now available by default from perl.h, and reflect the base revision, patchlevel, and subversion respectively. C<PERL_REVISION> had no prior equivalent, while C<PERL_VERSION> and C<PERL_SUBVERSION> were previously available as C<PATCHLEVEL> and C<SUBVERSION>. The new names cause less pollution of the B<cpp> namespace and reflect what the numbers have come to stand for in common practice. For compatibility, the old names are still supported when F<patchlevel.h> is explicitly included (as required before), so there is no source incompatibility from the change. =back =head2 Binary Incompatibilities In general, the default build of this release is expected to be binary compatible for extensions built with the 5.005 release or its maintenance versions. However, specific platforms may have broken binary compatibility due to changes in the defaults used in hints files. Therefore, please be sure to always check the platform-specific README files for any notes to the contrary. The usethreads or usemultiplicity builds are B<not> binary compatible with the corresponding builds in 5.005. On platforms that require an explicit list of exports (AIX, OS/2 and Windows, among others), purely internal symbols such as parser functions and the run time opcodes are not exported by default. Perl 5.005 used to export all functions irrespective of whether they were considered part of the public API or not. For the full list of public API functions, see L<perlapi>. =head1 Known Problems =head2 Thread test failures The subtests 19 and 20 of lib/thr5005.t test are known to fail due to fundamental problems in the 5.005 threading implementation. These are not new failures--Perl 5.005_0x has the same bugs, but didn't have these tests. =head2 EBCDIC platforms not supported In earlier releases of Perl, EBCDIC environments like OS390 (also known as Open Edition MVS) and VM-ESA were supported. Due to changes required by the UTF-8 (Unicode) support, the EBCDIC platforms are not supported in Perl 5.6.0. =head2 In 64-bit HP-UX the lib/io_multihomed test may hang The lib/io_multihomed test may hang in HP-UX if Perl has been configured to be 64-bit. Because other 64-bit platforms do not hang in this test, HP-UX is suspect. All other tests pass in 64-bit HP-UX. The test attempts to create and connect to "multihomed" sockets (sockets which have multiple IP addresses). =head2 NEXTSTEP 3.3 POSIX test failure In NEXTSTEP 3.3p2 the implementation of the strftime(3) in the operating system libraries is buggy: the %j format numbers the days of a month starting from zero, which, while being logical to programmers, will cause the subtests 19 to 27 of the lib/posix test may fail. =head2 Tru64 (aka Digital UNIX, aka DEC OSF/1) lib/sdbm test failure with gcc If compiled with gcc 2.95 the lib/sdbm test will fail (dump core). The cure is to use the vendor cc, it comes with the operating system and produces good code. =head2 UNICOS/mk CC failures during Configure run In UNICOS/mk the following errors may appear during the Configure run: Guessing which symbols your C compiler and preprocessor define... CC-20 cc: ERROR File = try.c, Line = 3 ... bad switch yylook 79bad switch yylook 79bad switch yylook 79bad switch yylook 79#ifdef A29K ... 4 errors detected in the compilation of "try.c". The culprit is the broken awk of UNICOS/mk. The effect is fortunately rather mild: Perl itself is not adversely affected by the error, only the h2ph utility coming with Perl, and that is rather rarely needed these days. =head2 Arrow operator and arrays When the left argument to the arrow operator C<< -> >> is an array, or the C<scalar> operator operating on an array, the result of the operation must be considered erroneous. For example: @x->[2] scalar(@x)->[2] These expressions will get run-time errors in some future release of Perl. =head2 Experimental features As discussed above, many features are still experimental. Interfaces and implementation of these features are subject to change, and in extreme cases, even subject to removal in some future release of Perl. These features include the following: =over 4 =item Threads =item Unicode =item 64-bit support =item Lvalue subroutines =item Weak references =item The pseudo-hash data type =item The Compiler suite =item Internal implementation of file globbing =item The DB module =item The regular expression code constructs: C<(?{ code })> and C<(??{ code })> =back =head1 Obsolete Diagnostics =over 4 =item Character class syntax [: :] is reserved for future extensions (W) Within regular expression character classes ([]) the syntax beginning with "[:" and ending with ":]" is reserved for future extensions. If you need to represent those character sequences inside a regular expression character class, just quote the square brackets with the backslash: "\[:" and ":\]". =item Ill-formed logical name |%s| in prime_env_iter (W) A warning peculiar to VMS. A logical name was encountered when preparing to iterate over %ENV which violates the syntactic rules governing logical names. Because it cannot be translated normally, it is skipped, and will not appear in %ENV. This may be a benign occurrence, as some software packages might directly modify logical name tables and introduce nonstandard names, or it may indicate that a logical name table has been corrupted. =item In string, @%s now must be written as \@%s The description of this error used to say: (Someday it will simply assume that an unbackslashed @ interpolates an array.) That day has come, and this fatal error has been removed. It has been replaced by a non-fatal warning instead. See L</Arrays now always interpolate into double-quoted strings> for details. =item Probable precedence problem on %s (W) The compiler found a bareword where it expected a conditional, which often indicates that an || or && was parsed as part of the last argument of the previous construct, for example: open FOO || die; =item regexp too big (F) The current implementation of regular expressions uses shorts as address offsets within a string. Unfortunately this means that if the regular expression compiles to longer than 32767, it'll blow up. Usually when you want a regular expression this big, there is a better way to do it with multiple statements. See L<perlre>. =item Use of "$$<digit>" to mean "${$}<digit>" is deprecated (D) Perl versions before 5.004 misinterpreted any type marker followed by "$" and a digit. For example, "$$0" was incorrectly taken to mean "${$}0" instead of "${$0}". This bug is (mostly) fixed in Perl 5.004. However, the developers of Perl 5.004 could not fix this bug completely, because at least two widely-used modules depend on the old meaning of "$$0" in a string. So Perl 5.004 still interprets "$$<digit>" in the old (broken) way inside strings; but it generates this message as a warning. And in Perl 5.005, this special treatment will cease. =back =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup. There may also be information at http://www.perl.com/perl/ , the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. =head1 SEE ALSO The F<Changes> file for exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =head1 HISTORY Written by Gurusamy Sarathy <F<gsar@activestate.com>>, with many contributions from The Perl Porters. Send omissions or corrections to <F<perlbug@perl.org>>. =cut perldelta.pod 0000644 00000015533 15125556335 0007245 0 ustar 00 =encoding utf8 =head1 NAME perldelta - what is new for perl v5.32.1 =head1 DESCRIPTION This document describes differences between the 5.32.0 release and the 5.32.1 release. If you are upgrading from an earlier release such as 5.31.0, first read L<perl5320delta>, which describes differences between 5.31.0 and 5.32.0. =head1 Incompatible Changes There are no changes intentionally incompatible with Perl 5.32.0. If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Data::Dumper> has been upgraded from version 2.174 to 2.174_01. A number of memory leaks have been fixed. =item * L<DynaLoader> has been upgraded from version 1.47 to 1.47_01. =item * L<Module::CoreList> has been upgraded from version 5.20200620 to 5.20210123. =item * L<Opcode> has been upgraded from version 1.47 to 1.48. A warning has been added about evaluating untrusted code with the perl interpreter. =item * L<Safe> has been upgraded from version 2.41 to 2.41_01. A warning has been added about evaluating untrusted code with the perl interpreter. =back =head1 Documentation =head2 New Documentation =head3 L<perlgov> Documentation of the newly formed rules of governance for Perl. =head3 L<perlsecpolicy> Documentation of how the Perl security team operates and how the team evaluates new security reports. =head2 Changes to Existing Documentation We have attempted to update the documentation to reflect the changes listed in this document. If you find any we have missed, open an issue at L<https://github.com/Perl/perl5/issues>. Additionally, the following selected changes have been made: =head3 L<perlop> =over 4 =item * Document range op behaviour change. =back =head1 Diagnostics The following additions or changes have been made to diagnostic output, including warnings and fatal error messages. For the complete list of diagnostic messages, see L<perldiag>. =head2 Changes to Existing Diagnostics =over 4 =item * L<\K not permitted in lookahead/lookbehind in regex; marked by <-- HERE in mE<sol>%sE<sol>|perldiag/"\K not permitted in lookahead/lookbehind in regex; marked by <-- HERE in m/%s/"> This error was incorrectly produced in some cases involving nested lookarounds. This has been fixed. [L<GH #18123|https://github.com/Perl/perl5/issues/18123>] =back =head1 Configuration and Compilation =over 4 =item * Newer 64-bit versions of the Intel C/C++ compiler are now recognized and have the correct flags set. =item * We now trap SIGBUS when F<Configure> checks for C<va_copy>. On several systems the attempt to determine if we need C<va_copy> or similar results in a SIGBUS instead of the expected SIGSEGV, which previously caused a core dump. [L<GH #18148|https://github.com/Perl/perl5/issues/18148>] =back =head1 Testing Tests were added and changed to reflect the other additions and changes in this release. =head1 Platform Support =head2 Platform-Specific Notes =over 4 =item MacOS (Darwin) The hints file for darwin has been updated to handle future macOS versions beyond 10. Perl can now be built on macOS Big Sur. [L<GH #17946|https://github.com/Perl/perl5/issues/17946>, L<GH #18406|https://github.com/Perl/perl5/issues/18406>] =item Minix Build errors on Minix have been fixed. [L<GH #17908|https://github.com/Perl/perl5/issues/17908>] =back =head1 Selected Bug Fixes =over 4 =item * Some list assignments involving C<undef> on the left-hand side were over-optimized and produced incorrect results. [L<GH #16685|https://github.com/Perl/perl5/issues/16685>, L<GH #17816|https://github.com/Perl/perl5/issues/17816>] =item * Fixed a bug in which some regexps with recursive subpatterns matched incorrectly. [L<GH #18096|https://github.com/Perl/perl5/issues/18096>] =item * Fixed a deadlock that hung the build when Perl is compiled for debugging memory problems and has PERL_MEM_LOG enabled. [L<GH #18341|https://github.com/Perl/perl5/issues/18341>] =item * Fixed a crash in the use of chained comparison operators when run under "no warnings 'uninitialized'". [L<GH #17917|https://github.com/Perl/perl5/issues/17917>, L<GH #18380|https://github.com/Perl/perl5/issues/18380>] =item * Exceptions thrown from destructors during global destruction are no longer swallowed. [L<GH #18063|https://github.com/Perl/perl5/issues/18063>] =back =head1 Acknowledgements Perl 5.32.1 represents approximately 7 months of development since Perl 5.32.0 and contains approximately 7,000 lines of changes across 80 files from 23 authors. Excluding auto-generated files, documentation and release tools, there were approximately 1,300 lines of changes to 23 .pm, .t, .c and .h files. Perl continues to flourish into its fourth decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.32.1: Adam Hartley, Andy Dougherty, Dagfinn Ilmari Mannsåker, Dan Book, David Mitchell, Graham Knop, Graham Ollis, Hauke D, H.Merijn Brand, Hugo van der Sanden, John Lightsey, Karen Etheridge, Karl Williamson, Leon Timmermans, Max Maischein, Nicolas R., Ricardo Signes, Richard Leach, Sawyer X, Sevan Janiyan, Steve Hay, Tom Hukins, Tony Cook. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the perl bug database at L<https://github.com/Perl/perl5/issues>. There may also be information at L<http://www.perl.org/>, the Perl Home Page. If you believe you have an unreported bug, please open an issue at L<https://github.com/Perl/perl5/issues>. Be sure to trim your bug down to a tiny but sufficient test case. If the bug you are reporting has security implications which make it inappropriate to send to a public issue tracker, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 Give Thanks If you wish to thank the Perl 5 Porters for the work we had done in Perl 5, you can do so by running the C<perlthanks> program: perlthanks This will send an email to the Perl 5 Porters list with your show of thanks. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlsource.pod 0000644 00000015734 15125556335 0007457 0 ustar 00 =encoding utf8 =for comment Consistent formatting of this file is achieved with: perl ./Porting/podtidy pod/perlsource.pod =head1 NAME perlsource - A guide to the Perl source tree =head1 DESCRIPTION This document describes the layout of the Perl source tree. If you're hacking on the Perl core, this will help you find what you're looking for. =head1 FINDING YOUR WAY AROUND The Perl source tree is big. Here's some of the thing you'll find in it: =head2 C code The C source code and header files mostly live in the root of the source tree. There are a few platform-specific directories which contain C code. In addition, some of the modules shipped with Perl include C or XS code. See L<perlinterp> for more details on the files that make up the Perl interpreter, as well as details on how it works. =head2 Core modules Modules shipped as part of the Perl core live in four subdirectories. Two of these directories contain modules that live in the core, and two contain modules that can also be released separately on CPAN. Modules which can be released on cpan are known as "dual-life" modules. =over 4 =item * F<lib/> This directory contains pure-Perl modules which are only released as part of the core. This directory contains I<all> of the modules and their tests, unlike other core modules. =item * F<ext/> Like F<lib/>, this directory contains modules which are only released as part of the core. Unlike F<lib/>, however, a module under F<ext/> generally has a CPAN-style directory- and file-layout and its own F<Makefile.PL>. There is no expectation that a module under F<ext/> will work with earlier versions of Perl 5. Hence, such a module may take full advantage of syntactical and other improvements in Perl 5 blead. =item * F<dist/> This directory is for dual-life modules where the blead source is canonical. Note that some modules in this directory may not yet have been released separately on CPAN. Modules under F<dist/> should make an effort to work with earlier versions of Perl 5. =item * F<cpan/> This directory contains dual-life modules where the CPAN module is canonical. Do not patch these modules directly! Changes to these modules should be submitted to the maintainer of the CPAN module. Once those changes are applied and released, the new version of the module will be incorporated into the core. =back For some dual-life modules, it has not yet been determined if the CPAN version or the blead source is canonical. Until that is done, those modules should be in F<cpan/>. =head2 Tests The Perl core has an extensive test suite. If you add new tests (or new modules with tests), you may need to update the F<t/TEST> file so that the tests are run. =over 4 =item * Module tests Tests for core modules in the F<lib/> directory are right next to the module itself. For example, we have F<lib/strict.pm> and F<lib/strict.t>. Tests for modules in F<ext/> and the dual-life modules are in F<t/> subdirectories for each module, like a standard CPAN distribution. =item * F<t/base/> Tests for the absolute basic functionality of Perl. This includes C<if>, basic file reads and writes, simple regexes, etc. These are run first in the test suite and if any of them fail, something is I<really> broken. =item * F<t/cmd/> Tests for basic control structures, C<if>/C<else>, C<while>, subroutines, etc. =item * F<t/comp/> Tests for basic issues of how Perl parses and compiles itself. =item * F<t/io/> Tests for built-in IO functions, including command line arguments. =item * F<t/mro/> Tests for perl's method resolution order implementations (see L<mro>). =item * F<t/op/> Tests for perl's built in functions that don't fit into any of the other directories. =item * F<t/opbasic/> Tests for perl's built in functions which, like those in F<t/op/>, do not fit into any of the other directories, but which, in addition, cannot use F<t/test.pl>,as that program depends on functionality which the test file itself is testing. =item * F<t/re/> Tests for regex related functions or behaviour. (These used to live in t/op). =item * F<t/run/> Tests for features of how perl actually runs, including exit codes and handling of PERL* environment variables. =item * F<t/uni/> Tests for the core support of Unicode. =item * F<t/win32/> Windows-specific tests. =item * F<t/porting/> Tests the state of the source tree for various common errors. For example, it tests that everyone who is listed in the git log has a corresponding entry in the F<AUTHORS> file. =item * F<t/lib/> The old home for the module tests, you shouldn't put anything new in here. There are still some bits and pieces hanging around in here that need to be moved. Perhaps you could move them? Thanks! =back =head2 Documentation All of the core documentation intended for end users lives in F<pod/>. Individual modules in F<lib/>, F<ext/>, F<dist/>, and F<cpan/> usually have their own documentation, either in the F<Module.pm> file or an accompanying F<Module.pod> file. Finally, documentation intended for core Perl developers lives in the F<Porting/> directory. =head2 Hacking tools and documentation The F<Porting> directory contains a grab bag of code and documentation intended to help porters work on Perl. Some of the highlights include: =over 4 =item * F<check*> These are scripts which will check the source things like ANSI C violations, POD encoding issues, etc. =item * F<Maintainers>, F<Maintainers.pl>, and F<Maintainers.pm> These files contain information on who maintains which modules. Run C<perl Porting/Maintainers -M Module::Name> to find out more information about a dual-life module. =item * F<podtidy> Tidies a pod file. It's a good idea to run this on a pod file you've patched. =back =head2 Build system The Perl build system on *nix-like systems starts with the F<Configure> script in the root directory. Platform-specific pieces of the build system also live in platform-specific directories like F<win32/>, F<vms/>, etc. Windows and VMS have their own Configure-like scripts, in their respective directories. The F<Configure> script (or a platform-specific similar script) is ultimately responsible for generating a F<Makefile> from F<Makefile.SH>. The build system that Perl uses is called metaconfig. This system is maintained separately from the Perl core, and knows about the platform-specific Configure-like scripts, as well as F<Configure> itself. The metaconfig system has its own git repository. Please see its README file in L<https://github.com/Perl/metaconfig> for more details. The F<Cross> directory contains various files related to cross-compiling Perl. See F<Cross/README> for more details. =head2 F<AUTHORS> This file lists everyone who's contributed to Perl. If you submit a patch, you should add your name to this file as part of the patch. =head2 F<MANIFEST> The F<MANIFEST> file in the root of the source tree contains a list of every file in the Perl core, as well as a brief description of each file. You can get an overview of all the files with this command: % perl -lne 'print if /^[^\/]+\.[ch]\s+/' MANIFEST perlmodinstall.pod 0000644 00000024025 15125556335 0010316 0 ustar 00 =head1 NAME perlmodinstall - Installing CPAN Modules =head1 DESCRIPTION You can think of a module as the fundamental unit of reusable Perl code; see L<perlmod> for details. Whenever anyone creates a chunk of Perl code that they think will be useful to the world, they register as a Perl developer at L<https://www.cpan.org/modules/04pause.html> so that they can then upload their code to the CPAN. The CPAN is the Comprehensive Perl Archive Network and can be accessed at L<https://www.cpan.org/> , and searched at L<https://metacpan.org/> . This documentation is for people who want to download CPAN modules and install them on their own computer. =head2 PREAMBLE First, are you sure that the module isn't already on your system? Try C<perl -MFoo -e 1>. (Replace "Foo" with the name of the module; for instance, C<perl -MCGI::Carp -e 1>.) If you don't see an error message, you have the module. (If you do see an error message, it's still possible you have the module, but that it's not in your path, which you can display with C<perl -e "print qq(@INC)">.) For the remainder of this document, we'll assume that you really honestly truly lack an installed module, but have found it on the CPAN. So now you have a file ending in .tar.gz (or, less often, .zip). You know there's a tasty module inside. There are four steps you must now take: =over 5 =item B<DECOMPRESS> the file =item B<UNPACK> the file into a directory =item B<BUILD> the module (sometimes unnecessary) =item B<INSTALL> the module. =back Here's how to perform each step for each operating system. This is <not> a substitute for reading the README and INSTALL files that might have come with your module! Also note that these instructions are tailored for installing the module into your system's repository of Perl modules, but you can install modules into any directory you wish. For instance, where I say C<perl Makefile.PL>, you can substitute C<perl Makefile.PL PREFIX=/my/perl_directory> to install the modules into F</my/perl_directory>. Then you can use the modules from your Perl programs with C<use lib "/my/perl_directory/lib/site_perl";> or sometimes just C<use "/my/perl_directory";>. If you're on a system that requires superuser/root access to install modules into the directories you see when you type C<perl -e "print qq(@INC)">, you'll want to install them into a local directory (such as your home directory) and use this approach. =over 4 =item * B<If you're on a Unix or Unix-like system,> You can use Andreas Koenig's CPAN module ( L<https://metacpan.org/release/CPAN> ) to automate the following steps, from DECOMPRESS through INSTALL. A. DECOMPRESS Decompress the file with C<gzip -d yourmodule.tar.gz> You can get gzip from L<ftp://prep.ai.mit.edu/pub/gnu/> Or, you can combine this step with the next to save disk space: gzip -dc yourmodule.tar.gz | tar -xof - B. UNPACK Unpack the result with C<tar -xof yourmodule.tar> C. BUILD Go into the newly-created directory and type: perl Makefile.PL make test or perl Makefile.PL PREFIX=/my/perl_directory to install it locally. (Remember that if you do this, you'll have to put C<use lib "/my/perl_directory";> near the top of the program that is to use this module. D. INSTALL While still in that directory, type: make install Make sure you have the appropriate permissions to install the module in your Perl 5 library directory. Often, you'll need to be root. That's all you need to do on Unix systems with dynamic linking. Most Unix systems have dynamic linking. If yours doesn't, or if for another reason you have a statically-linked perl, B<and> the module requires compilation, you'll need to build a new Perl binary that includes the module. Again, you'll probably need to be root. =item * B<If you're running ActivePerl (Win95/98/2K/NT/XP, Linux, Solaris),> First, type C<ppm> from a shell and see whether ActiveState's PPM repository has your module. If so, you can install it with C<ppm> and you won't have to bother with any of the other steps here. You might be able to use the CPAN instructions from the "Unix or Linux" section above as well; give it a try. Otherwise, you'll have to follow the steps below. A. DECOMPRESS You can use the open source 7-zip ( L<https://www.7-zip.org/> ) or the shareware Winzip ( L<https://www.winzip.com> ) to decompress and unpack modules. B. UNPACK If you used WinZip, this was already done for you. C. BUILD You'll need the C<nmake> utility, available at L<http://download.microsoft.com/download/vc15/Patch/1.52/W95/EN-US/nmake15.exe> or dmake, available on CPAN. L<https://metacpan.org/release/dmake> Does the module require compilation (i.e. does it have files that end in .xs, .c, .h, .y, .cc, .cxx, or .C)? If it does, life is now officially tough for you, because you have to compile the module yourself (no easy feat on Windows). You'll need a compiler such as Visual C++. Alternatively, you can download a pre-built PPM package from ActiveState. L<http://aspn.activestate.com/ASPN/Downloads/ActivePerl/PPM/> Go into the newly-created directory and type: perl Makefile.PL nmake test D. INSTALL While still in that directory, type: nmake install =item * B<If you're on the DJGPP port of DOS,> A. DECOMPRESS djtarx ( L<ftp://ftp.delorie.com/pub/djgpp/current/v2/> ) will both uncompress and unpack. B. UNPACK See above. C. BUILD Go into the newly-created directory and type: perl Makefile.PL make test You will need the packages mentioned in F<README.dos> in the Perl distribution. D. INSTALL While still in that directory, type: make install You will need the packages mentioned in F<README.dos> in the Perl distribution. =item * B<If you're on OS/2,> Get the EMX development suite and gzip/tar from Hobbes ( L<http://hobbes.nmsu.edu/h-browse.php?dir=/pub/os2/dev/emx/v0.9d> ), and then follow the instructions for Unix. =item * B<If you're on VMS,> When downloading from CPAN, save your file with a C<.tgz> extension instead of C<.tar.gz>. All other periods in the filename should be replaced with underscores. For example, C<Your-Module-1.33.tar.gz> should be downloaded as C<Your-Module-1_33.tgz>. A. DECOMPRESS Type gzip -d Your-Module.tgz or, for zipped modules, type unzip Your-Module.zip Executables for gzip, zip, and VMStar: http://www.hp.com/go/openvms/freeware/ and their source code: http://www.fsf.org/order/ftp.html Note that GNU's gzip/gunzip is not the same as Info-ZIP's zip/unzip package. The former is a simple compression tool; the latter permits creation of multi-file archives. B. UNPACK If you're using VMStar: VMStar xf Your-Module.tar Or, if you're fond of VMS command syntax: tar/extract/verbose Your_Module.tar C. BUILD Make sure you have MMS (from Digital) or the freeware MMK ( available from MadGoat at L<http://www.madgoat.com> ). Then type this to create the DESCRIP.MMS for the module: perl Makefile.PL Now you're ready to build: mms test Substitute C<mmk> for C<mms> above if you're using MMK. D. INSTALL Type mms install Substitute C<mmk> for C<mms> above if you're using MMK. =item * B<If you're on MVS>, Introduce the F<.tar.gz> file into an HFS as binary; don't translate from ASCII to EBCDIC. A. DECOMPRESS Decompress the file with C<gzip -d yourmodule.tar.gz> You can get gzip from L<http://www.s390.ibm.com/products/oe/bpxqp1.html> B. UNPACK Unpack the result with pax -o to=IBM-1047,from=ISO8859-1 -r < yourmodule.tar The BUILD and INSTALL steps are identical to those for Unix. Some modules generate Makefiles that work better with GNU make, which is available from L<http://www.mks.com/s390/gnu/> =back =head1 PORTABILITY Note that not all modules will work with on all platforms. See L<perlport> for more information on portability issues. Read the documentation to see if the module will work on your system. There are basically three categories of modules that will not work "out of the box" with all platforms (with some possibility of overlap): =over 4 =item * B<Those that should, but don't.> These need to be fixed; consider contacting the author and possibly writing a patch. =item * B<Those that need to be compiled, where the target platform doesn't have compilers readily available.> (These modules contain F<.xs> or F<.c> files, usually.) You might be able to find existing binaries on the CPAN or elsewhere, or you might want to try getting compilers and building it yourself, and then release the binary for other poor souls to use. =item * B<Those that are targeted at a specific platform.> (Such as the Win32:: modules.) If the module is targeted specifically at a platform other than yours, you're out of luck, most likely. =back Check the CPAN Testers if a module should work with your platform but it doesn't behave as you'd expect, or you aren't sure whether or not a module will work under your platform. If the module you want isn't listed there, you can test it yourself and let CPAN Testers know, you can join CPAN Testers, or you can request it be tested. https://cpantesters.org/ =head1 HEY If you have any suggested changes for this page, let me know. Please don't send me mail asking for help on how to install your modules. There are too many modules, and too few Orwants, for me to be able to answer or even acknowledge all your questions. Contact the module author instead, ask someone familiar with Perl on your operating system, or if all else fails, file a ticket at L<https://rt.cpan.org/>. =head1 AUTHOR Jon Orwant orwant@medita.mit.edu with invaluable help from Chris Nandor, and valuable help from Brandon Allbery, Charles Bailey, Graham Barr, Dominic Dunlop, Jarkko Hietaniemi, Ben Holzman, Tom Horsley, Nick Ing-Simmons, Tuomas J. Lukka, Laszlo Molnar, Alan Olsen, Peter Prymmer, Gurusamy Sarathy, Christoph Spalinger, Dan Sugalski, Larry Virden, and Ilya Zakharevich. First version July 22, 1998; last revised November 21, 2001. =head1 COPYRIGHT Copyright (C) 1998, 2002, 2003 Jon Orwant. All Rights Reserved. This document may be distributed under the same terms as Perl itself. perl5140delta.pod 0000644 00000431705 15125556335 0007562 0 ustar 00 =encoding utf8 =head1 NAME perl5140delta - what is new for perl v5.14.0 =head1 DESCRIPTION This document describes differences between the 5.12.0 release and the 5.14.0 release. If you are upgrading from an earlier release such as 5.10.0, first read L<perl5120delta>, which describes differences between 5.10.0 and 5.12.0. Some of the bug fixes in this release have been backported to subsequent releases of 5.12.x. Those are indicated with the 5.12.x version in parentheses. =head1 Notice As described in L<perlpolicy>, the release of Perl 5.14.0 marks the official end of support for Perl 5.10. Users of Perl 5.10 or earlier should consider upgrading to a more recent release of Perl. =head1 Core Enhancements =head2 Unicode =head3 Unicode Version 6.0 is now supported (mostly) Perl comes with the Unicode 6.0 data base updated with L<Corrigendum #8|http://www.unicode.org/versions/corrigendum8.html>, with one exception noted below. See L<http://unicode.org/versions/Unicode6.0.0/> for details on the new release. Perl does not support any Unicode provisional properties, including the new ones for this release. Unicode 6.0 has chosen to use the name C<BELL> for the character at U+1F514, which is a symbol that looks like a bell, and is used in Japanese cell phones. This conflicts with the long-standing Perl usage of having C<BELL> mean the ASCII C<BEL> character, U+0007. In Perl 5.14, C<\N{BELL}> continues to mean U+0007, but its use generates a deprecation warning message unless such warnings are turned off. The new name for U+0007 in Perl is C<ALERT>, which corresponds nicely with the existing shorthand sequence for it, C<"\a">. C<\N{BEL}> means U+0007, with no warning given. The character at U+1F514 has no name in 5.14, but can be referred to by C<\N{U+1F514}>. In Perl 5.16, C<\N{BELL}> will refer to U+1F514; all code that uses C<\N{BELL}> should be converted to use C<\N{ALERT}>, C<\N{BEL}>, or C<"\a"> before upgrading. =head3 Full functionality for C<use feature 'unicode_strings'> This release provides full functionality for C<use feature 'unicode_strings'>. Under its scope, all string operations executed and regular expressions compiled (even if executed outside its scope) have Unicode semantics. See L<feature/"the 'unicode_strings' feature">. However, see L</Inverted bracketed character classes and multi-character folds>, below. This feature avoids most forms of the "Unicode Bug" (see L<perlunicode/The "Unicode Bug"> for details). If there is any possibility that your code will process Unicode strings, you are I<strongly> encouraged to use this subpragma to avoid nasty surprises. =head3 C<\N{I<NAME>}> and C<charnames> enhancements =over =item * C<\N{I<NAME>}> and C<charnames::vianame> now know about the abbreviated character names listed by Unicode, such as NBSP, SHY, LRO, ZWJ, etc.; all customary abbreviations for the C0 and C1 control characters (such as ACK, BEL, CAN, etc.); and a few new variants of some C1 full names that are in common usage. =item * Unicode has several I<named character sequences>, in which particular sequences of code points are given names. C<\N{I<NAME>}> now recognizes these. =item * C<\N{I<NAME>}>, C<charnames::vianame>, and C<charnames::viacode> now know about every character in Unicode. In earlier releases of Perl, they didn't know about the Hangul syllables nor several CJK (Chinese/Japanese/Korean) characters. =item * It is now possible to override Perl's abbreviations with your own custom aliases. =item * You can now create a custom alias of the ordinal of a character, known by C<\N{I<NAME>}>, C<charnames::vianame()>, and C<charnames::viacode()>. Previously, aliases had to be to official Unicode character names. This made it impossible to create an alias for unnamed code points, such as those reserved for private use. =item * The new function charnames::string_vianame() is a run-time version of C<\N{I<NAME>}}>, returning the string of characters whose Unicode name is its parameter. It can handle Unicode named character sequences, whereas the pre-existing charnames::vianame() cannot, as the latter returns a single code point. =back See L<charnames> for details on all these changes. =head3 New warnings categories for problematic (non-)Unicode code points. Three new warnings subcategories of "utf8" have been added. These allow you to turn off some "utf8" warnings, while allowing other warnings to remain on. The three categories are: C<surrogate> when UTF-16 surrogates are encountered; C<nonchar> when Unicode non-character code points are encountered; and C<non_unicode> when code points above the legal Unicode maximum of 0x10FFFF are encountered. =head3 Any unsigned value can be encoded as a character With this release, Perl is adopting a model that any unsigned value can be treated as a code point and encoded internally (as utf8) without warnings, not just the code points that are legal in Unicode. However, unless utf8 or the corresponding sub-category (see previous item) of lexical warnings have been explicitly turned off, outputting or executing a Unicode-defined operation such as upper-casing on such a code point generates a warning. Attempting to input these using strict rules (such as with the C<:encoding(UTF-8)> layer) will continue to fail. Prior to this release, handling was inconsistent and in places, incorrect. Unicode non-characters, some of which previously were erroneously considered illegal in places by Perl, contrary to the Unicode Standard, are now always legal internally. Inputting or outputting them works the same as with the non-legal Unicode code points, because the Unicode Standard says they are (only) illegal for "open interchange". =head3 Unicode database files not installed The Unicode database files are no longer installed with Perl. This doesn't affect any functionality in Perl and saves significant disk space. If you need these files, you can download them from L<http://www.unicode.org/Public/zipped/6.0.0/>. =head2 Regular Expressions =head3 C<(?^...)> construct signifies default modifiers An ASCII caret C<"^"> immediately following a C<"(?"> in a regular expression now means that the subexpression does not inherit surrounding modifiers such as C</i>, but reverts to the Perl defaults. Any modifiers following the caret override the defaults. Stringification of regular expressions now uses this notation. For example, C<qr/hlagh/i> would previously be stringified as C<(?i-xsm:hlagh)>, but now it's stringified as C<(?^i:hlagh)>. The main purpose of this change is to allow tests that rely on the stringification I<not> to have to change whenever new modifiers are added. See L<perlre/Extended Patterns>. This change is likely to break code that compares stringified regular expressions with fixed strings containing C<?-xism>. =head3 C</d>, C</l>, C</u>, and C</a> modifiers Four new regular expression modifiers have been added. These are mutually exclusive: one only can be turned on at a time. =over =item * The C</l> modifier says to compile the regular expression as if it were in the scope of C<use locale>, even if it is not. =item * The C</u> modifier says to compile the regular expression as if it were in the scope of a C<use feature 'unicode_strings'> pragma. =item * The C</d> (default) modifier is used to override any C<use locale> and C<use feature 'unicode_strings'> pragmas in effect at the time of compiling the regular expression. =item * The C</a> regular expression modifier restricts C<\s>, C<\d> and C<\w> and the POSIX (C<[[:posix:]]>) character classes to the ASCII range. Their complements and C<\b> and C<\B> are correspondingly affected. Otherwise, C</a> behaves like the C</u> modifier, in that case-insensitive matching uses Unicode semantics. If the C</a> modifier is repeated, then additionally in case-insensitive matching, no ASCII character can match a non-ASCII character. For example, "k" =~ /\N{KELVIN SIGN}/ai "\xDF" =~ /ss/ai match but "k" =~ /\N{KELVIN SIGN}/aai "\xDF" =~ /ss/aai do not match. =back See L<perlre/Modifiers> for more detail. =head3 Non-destructive substitution The substitution (C<s///>) and transliteration (C<y///>) operators now support an C</r> option that copies the input variable, carries out the substitution on the copy, and returns the result. The original remains unmodified. my $old = "cat"; my $new = $old =~ s/cat/dog/r; # $old is "cat" and $new is "dog" This is particularly useful with C<map>. See L<perlop> for more examples. =head3 Re-entrant regular expression engine It is now safe to use regular expressions within C<(?{...})> and C<(??{...})> code blocks inside regular expressions. These blocks are still experimental, however, and still have problems with lexical (C<my>) variables and abnormal exiting. =head3 C<use re '/flags'> The C<re> pragma now has the ability to turn on regular expression flags till the end of the lexical scope: use re "/x"; "foo" =~ / (.+) /; # /x implied See L<re/"'/flags' mode"> for details. =head3 \o{...} for octals There is a new octal escape sequence, C<"\o">, in doublequote-like contexts. This construct allows large octal ordinals beyond the current max of 0777 to be represented. It also allows you to specify a character in octal which can safely be concatenated with other regex snippets and which won't be confused with being a backreference to a regex capture group. See L<perlre/Capture groups>. =head3 Add C<\p{Titlecase}> as a synonym for C<\p{Title}> This synonym is added for symmetry with the Unicode property names C<\p{Uppercase}> and C<\p{Lowercase}>. =head3 Regular expression debugging output improvement Regular expression debugging output (turned on by C<use re 'debug'>) now uses hexadecimal when escaping non-ASCII characters, instead of octal. =head3 Return value of C<delete $+{...}> Custom regular expression engines can now determine the return value of C<delete> on an entry of C<%+> or C<%->. =head2 Syntactical Enhancements =head3 Array and hash container functions accept references B<Warning:> This feature is considered experimental, as the exact behaviour may change in a future version of Perl. All builtin functions that operate directly on array or hash containers now also accept unblessed hard references to arrays or hashes: |----------------------------+---------------------------| | Traditional syntax | Terse syntax | |----------------------------+---------------------------| | push @$arrayref, @stuff | push $arrayref, @stuff | | unshift @$arrayref, @stuff | unshift $arrayref, @stuff | | pop @$arrayref | pop $arrayref | | shift @$arrayref | shift $arrayref | | splice @$arrayref, 0, 2 | splice $arrayref, 0, 2 | | keys %$hashref | keys $hashref | | keys @$arrayref | keys $arrayref | | values %$hashref | values $hashref | | values @$arrayref | values $arrayref | | ($k,$v) = each %$hashref | ($k,$v) = each $hashref | | ($k,$v) = each @$arrayref | ($k,$v) = each $arrayref | |----------------------------+---------------------------| This allows these builtin functions to act on long dereferencing chains or on the return value of subroutines without needing to wrap them in C<@{}> or C<%{}>: push @{$obj->tags}, $new_tag; # old way push $obj->tags, $new_tag; # new way for ( keys %{$hoh->{genres}{artists}} ) {...} # old way for ( keys $hoh->{genres}{artists} ) {...} # new way =head3 Single term prototype The C<+> prototype is a special alternative to C<$> that acts like C<\[@%]> when given a literal array or hash variable, but will otherwise force scalar context on the argument. See L<perlsub/Prototypes>. =head3 C<package> block syntax A package declaration can now contain a code block, in which case the declaration is in scope inside that block only. So C<package Foo { ... }> is precisely equivalent to C<{ package Foo; ... }>. It also works with a version number in the declaration, as in C<package Foo 1.2 { ... }>, which is its most attractive feature. See L<perlfunc>. =head3 Statement labels can appear in more places Statement labels can now occur before any type of statement or declaration, such as C<package>. =head3 Stacked labels Multiple statement labels can now appear before a single statement. =head3 Uppercase X/B allowed in hexadecimal/binary literals Literals may now use either upper case C<0X...> or C<0B...> prefixes, in addition to the already supported C<0x...> and C<0b...> syntax [perl #76296]. C, Ruby, Python, and PHP already support this syntax, and it makes Perl more internally consistent: a round-trip with C<eval sprintf "%#X", 0x10> now returns C<16>, just like C<eval sprintf "%#x", 0x10>. =head3 Overridable tie functions C<tie>, C<tied> and C<untie> can now be overridden [perl #75902]. =head2 Exception Handling To make them more reliable and consistent, several changes have been made to how C<die>, C<warn>, and C<$@> behave. =over =item * When an exception is thrown inside an C<eval>, the exception is no longer at risk of being clobbered by destructor code running during unwinding. Previously, the exception was written into C<$@> early in the throwing process, and would be overwritten if C<eval> was used internally in the destructor for an object that had to be freed while exiting from the outer C<eval>. Now the exception is written into C<$@> last thing before exiting the outer C<eval>, so the code running immediately thereafter can rely on the value in C<$@> correctly corresponding to that C<eval>. (C<$@> is still also set before exiting the C<eval>, for the sake of destructors that rely on this.) Likewise, a C<local $@> inside an C<eval> no longer clobbers any exception thrown in its scope. Previously, the restoration of C<$@> upon unwinding would overwrite any exception being thrown. Now the exception gets to the C<eval> anyway. So C<local $@> is safe before a C<die>. Exceptions thrown from object destructors no longer modify the C<$@> of the surrounding context. (If the surrounding context was exception unwinding, this used to be another way to clobber the exception being thrown.) Previously such an exception was sometimes emitted as a warning, and then either was string-appended to the surrounding C<$@> or completely replaced the surrounding C<$@>, depending on whether that exception and the surrounding C<$@> were strings or objects. Now, an exception in this situation is always emitted as a warning, leaving the surrounding C<$@> untouched. In addition to object destructors, this also affects any function call run by XS code using the C<G_KEEPERR> flag. =item * Warnings for C<warn> can now be objects in the same way as exceptions for C<die>. If an object-based warning gets the default handling of writing to standard error, it is stringified as before with the filename and line number appended. But a C<$SIG{__WARN__}> handler now receives an object-based warning as an object, where previously it was passed the result of stringifying the object. =back =head2 Other Enhancements =head3 Assignment to C<$0> sets the legacy process name with prctl() on Linux On Linux the legacy process name is now set with L<prctl(2)>, in addition to altering the POSIX name via C<argv[0]>, as Perl has done since version 4.000. Now system utilities that read the legacy process name such as I<ps>, I<top>, and I<killall> recognize the name you set when assigning to C<$0>. The string you supply is truncated at 16 bytes; this limitation is imposed by Linux. =head3 srand() now returns the seed This allows programs that need to have repeatable results not to have to come up with their own seed-generating mechanism. Instead, they can use srand() and stash the return value for future use. One example is a test program with too many combinations to test comprehensively in the time available for each run. It can test a random subset each time and, should there be a failure, log the seed used for that run so this can later be used to produce the same results. =head3 printf-like functions understand post-1980 size modifiers Perl's printf and sprintf operators, and Perl's internal printf replacement function, now understand the C90 size modifiers "hh" (C<char>), "z" (C<size_t>), and "t" (C<ptrdiff_t>). Also, when compiled with a C99 compiler, Perl now understands the size modifier "j" (C<intmax_t>) (but this is not portable). So, for example, on any modern machine, C<sprintf("%hhd", 257)> returns "1". =head3 New global variable C<${^GLOBAL_PHASE}> A new global variable, C<${^GLOBAL_PHASE}>, has been added to allow introspection of the current phase of the Perl interpreter. It's explained in detail in L<perlvar/"${^GLOBAL_PHASE}"> and in L<perlmod/"BEGIN, UNITCHECK, CHECK, INIT and END">. =head3 C<-d:-foo> calls C<Devel::foo::unimport> The syntax B<-d:foo> was extended in 5.6.1 to make B<-d:foo=bar> equivalent to B<-MDevel::foo=bar>, which expands internally to C<use Devel::foo 'bar'>. Perl now allows prefixing the module name with B<->, with the same semantics as B<-M>; that is: =over 4 =item C<-d:-foo> Equivalent to B<-M-Devel::foo>: expands to C<no Devel::foo> and calls C<< Devel::foo->unimport() >> if that method exists. =item C<-d:-foo=bar> Equivalent to B<-M-Devel::foo=bar>: expands to C<no Devel::foo 'bar'>, and calls C<< Devel::foo->unimport("bar") >> if that method exists. =back This is particularly useful for suppressing the default actions of a C<Devel::*> module's C<import> method whilst still loading it for debugging. =head3 Filehandle method calls load L<IO::File> on demand When a method call on a filehandle would die because the method cannot be resolved and L<IO::File> has not been loaded, Perl now loads L<IO::File> via C<require> and attempts method resolution again: open my $fh, ">", $file; $fh->binmode(":raw"); # loads IO::File and succeeds This also works for globs like C<STDOUT>, C<STDERR>, and C<STDIN>: STDOUT->autoflush(1); Because this on-demand load happens only if method resolution fails, the legacy approach of manually loading an L<IO::File> parent class for partial method support still works as expected: use IO::Handle; open my $fh, ">", $file; $fh->autoflush(1); # IO::File not loaded =head3 Improved IPv6 support The C<Socket> module provides new affordances for IPv6, including implementations of the C<Socket::getaddrinfo()> and C<Socket::getnameinfo()> functions, along with related constants and a handful of new functions. See L<Socket>. =head3 DTrace probes now include package name The C<DTrace> probes now include an additional argument, C<arg3>, which contains the package the subroutine being entered or left was compiled in. For example, using the following DTrace script: perl$target:::sub-entry { printf("%s::%s\n", copyinstr(arg0), copyinstr(arg3)); } and then running: $ perl -e 'sub test { }; test' C<DTrace> will print: main::test =head2 New C APIs See L</Internal Changes>. =head1 Security =head2 User-defined regular expression properties L<perlunicode/"User-Defined Character Properties"> documented that you can create custom properties by defining subroutines whose names begin with "In" or "Is". However, Perl did not actually enforce that naming restriction, so C<\p{foo::bar}> could call foo::bar() if it existed. The documented convention is now enforced. Also, Perl no longer allows tainted regular expressions to invoke a user-defined property. It simply dies instead [perl #82616]. =head1 Incompatible Changes Perl 5.14.0 is not binary-compatible with any previous stable release. In addition to the sections that follow, see L</C API Changes>. =head2 Regular Expressions and String Escapes =head3 Inverted bracketed character classes and multi-character folds Some characters match a sequence of two or three characters in C</i> regular expression matching under Unicode rules. One example is C<LATIN SMALL LETTER SHARP S> which matches the sequence C<ss>. 'ss' =~ /\A[\N{LATIN SMALL LETTER SHARP S}]\z/i # Matches This, however, can lead to very counter-intuitive results, especially when inverted. Because of this, Perl 5.14 does not use multi-character C</i> matching in inverted character classes. 'ss' =~ /\A[^\N{LATIN SMALL LETTER SHARP S}]+\z/i # ??? This should match any sequences of characters that aren't the C<SHARP S> nor what C<SHARP S> matches under C</i>. C<"s"> isn't C<SHARP S>, but Unicode says that C<"ss"> is what C<SHARP S> matches under C</i>. So which one "wins"? Do you fail the match because the string has C<ss> or accept it because it has an C<s> followed by another C<s>? Earlier releases of Perl did allow this multi-character matching, but due to bugs, it mostly did not work. =head3 \400-\777 In certain circumstances, C<\400>-C<\777> in regexes have behaved differently than they behave in all other doublequote-like contexts. Since 5.10.1, Perl has issued a deprecation warning when this happens. Now, these literals behave the same in all doublequote-like contexts, namely to be equivalent to C<\x{100}>-C<\x{1FF}>, with no deprecation warning. Use of C<\400>-C<\777> in the command-line option B<-0> retain their conventional meaning. They slurp whole input files; previously, this was documented only for B<-0777>. Because of various ambiguities, you should use the new C<\o{...}> construct to represent characters in octal instead. =head3 Most C<\p{}> properties are now immune to case-insensitive matching For most Unicode properties, it doesn't make sense to have them match differently under C</i> case-insensitive matching. Doing so can lead to unexpected results and potential security holes. For example m/\p{ASCII_Hex_Digit}+/i could previously match non-ASCII characters because of the Unicode matching rules (although there were several bugs with this). Now matching under C</i> gives the same results as non-C</i> matching except for those few properties where people have come to expect differences, namely the ones where casing is an integral part of their meaning, such as C<m/\p{Uppercase}/i> and C<m/\p{Lowercase}/i>, both of which match the same code points as matched by C<m/\p{Cased}/i>. Details are in L<perlrecharclass/Unicode Properties>. User-defined property handlers that need to match differently under C</i> must be changed to read the new boolean parameter passed to them, which is non-zero if case-insensitive matching is in effect and 0 otherwise. See L<perlunicode/User-Defined Character Properties>. =head3 \p{} implies Unicode semantics Specifying a Unicode property in the pattern indicates that the pattern is meant for matching according to Unicode rules, the way C<\N{I<NAME>}> does. =head3 Regular expressions retain their localeness when interpolated Regular expressions compiled under C<use locale> now retain this when interpolated into a new regular expression compiled outside a C<use locale>, and vice-versa. Previously, one regular expression interpolated into another inherited the localeness of the surrounding regex, losing whatever state it originally had. This is considered a bug fix, but may trip up code that has come to rely on the incorrect behaviour. =head3 Stringification of regexes has changed Default regular expression modifiers are now notated using C<(?^...)>. Code relying on the old stringification will fail. This is so that when new modifiers are added, such code won't have to keep changing each time this happens, because the stringification will automatically incorporate the new modifiers. Code that needs to work properly with both old- and new-style regexes can avoid the whole issue by using (for perls since 5.9.5; see L<re>): use re qw(regexp_pattern); my ($pat, $mods) = regexp_pattern($re_ref); If the actual stringification is important or older Perls need to be supported, you can use something like the following: # Accept both old and new-style stringification my $modifiers = (qr/foobar/ =~ /\Q(?^/) ? "^" : "-xism"; And then use C<$modifiers> instead of C<-xism>. =head3 Run-time code blocks in regular expressions inherit pragmata Code blocks in regular expressions (C<(?{...})> and C<(??{...})>) previously did not inherit pragmata (strict, warnings, etc.) if the regular expression was compiled at run time as happens in cases like these two: use re "eval"; $foo =~ $bar; # when $bar contains (?{...}) $foo =~ /$bar(?{ $finished = 1 })/; This bug has now been fixed, but code that relied on the buggy behaviour may need to be fixed to account for the correct behaviour. =head2 Stashes and Package Variables =head3 Localised tied hashes and arrays are no longed tied In the following: tie @a, ...; { local @a; # here, @a is a now a new, untied array } # here, @a refers again to the old, tied array Earlier versions of Perl incorrectly tied the new local array. This has now been fixed. This fix could however potentially cause a change in behaviour of some code. =head3 Stashes are now always defined C<defined %Foo::> now always returns true, even when no symbols have yet been defined in that package. This is a side-effect of removing a special-case kludge in the tokeniser, added for 5.10.0, to hide side-effects of changes to the internal storage of hashes. The fix drastically reduces hashes' memory overhead. Calling defined on a stash has been deprecated since 5.6.0, warned on lexicals since 5.6.0, and warned for stashes and other package variables since 5.12.0. C<defined %hash> has always exposed an implementation detail: emptying a hash by deleting all entries from it does not make C<defined %hash> false. Hence C<defined %hash> is not valid code to determine whether an arbitrary hash is empty. Instead, use the behaviour of an empty C<%hash> always returning false in scalar context. =head3 Clearing stashes Stash list assignment C<%foo:: = ()> used to make the stash temporarily anonymous while it was being emptied. Consequently, any of its subroutines referenced elsewhere would become anonymous, showing up as "(unknown)" in C<caller>. They now retain their package names such that C<caller> returns the original sub name if there is still a reference to its typeglob and "foo::__ANON__" otherwise [perl #79208]. =head3 Dereferencing typeglobs If you assign a typeglob to a scalar variable: $glob = *foo; the glob that is copied to C<$glob> is marked with a special flag indicating that the glob is just a copy. This allows subsequent assignments to C<$glob> to overwrite the glob. The original glob, however, is immutable. Some Perl operators did not distinguish between these two types of globs. This would result in strange behaviour in edge cases: C<untie $scalar> would not untie the scalar if the last thing assigned to it was a glob (because it treated it as C<untie *$scalar>, which unties a handle). Assignment to a glob slot (such as C<*$glob = \@some_array>) would simply assign C<\@some_array> to C<$glob>. To fix this, the C<*{}> operator (including its C<*foo> and C<*$foo> forms) has been modified to make a new immutable glob if its operand is a glob copy. This allows operators that make a distinction between globs and scalars to be modified to treat only immutable globs as globs. (C<tie>, C<tied> and C<untie> have been left as they are for compatibility's sake, but will warn. See L</Deprecations>.) This causes an incompatible change in code that assigns a glob to the return value of C<*{}> when that operator was passed a glob copy. Take the following code, for instance: $glob = *foo; *$glob = *bar; The C<*$glob> on the second line returns a new immutable glob. That new glob is made an alias to C<*bar>. Then it is discarded. So the second assignment has no effect. See L<http://rt.perl.org/rt3/Public/Bug/Display.html?id=77810> for more detail. =head3 Magic variables outside the main package In previous versions of Perl, magic variables like C<$!>, C<%SIG>, etc. would "leak" into other packages. So C<%foo::SIG> could be used to access signals, C<${"foo::!"}> (with strict mode off) to access C's C<errno>, etc. This was a bug, or an "unintentional" feature, which caused various ill effects, such as signal handlers being wiped when modules were loaded, etc. This has been fixed (or the feature has been removed, depending on how you see it). =head3 local($_) strips all magic from $_ local() on scalar variables gives them a new value but keeps all their magic intact. This has proven problematic for the default scalar variable $_, where L<perlsub> recommends that any subroutine that assigns to $_ should first localize it. This would throw an exception if $_ is aliased to a read-only variable, and could in general have various unintentional side-effects. Therefore, as an exception to the general rule, local($_) will not only assign a new value to $_, but also remove all existing magic from it as well. =head3 Parsing of package and variable names Parsing the names of packages and package variables has changed: multiple adjacent pairs of colons, as in C<foo::::bar>, are now all treated as package separators. Regardless of this change, the exact parsing of package separators has never been guaranteed and is subject to change in future Perl versions. =head2 Changes to Syntax or to Perl Operators =head3 C<given> return values C<given> blocks now return the last evaluated expression, or an empty list if the block was exited by C<break>. Thus you can now write: my $type = do { given ($num) { break when undef; "integer" when /^[+-]?[0-9]+$/; "float" when /^[+-]?[0-9]+(?:\.[0-9]+)?$/; "unknown"; } }; See L<perlsyn/Return value> for details. =head3 Change in parsing of certain prototypes Functions declared with the following prototypes now behave correctly as unary functions: * \$ \% \@ \* \& \[...] ;$ ;* ;\$ ;\% etc. ;\[...] Due to this bug fix [perl #75904], functions using the C<(*)>, C<(;$)> and C<(;*)> prototypes are parsed with higher precedence than before. So in the following example: sub foo(;$); foo $a < $b; the second line is now parsed correctly as C<< foo($a) < $b >>, rather than C<< foo($a < $b) >>. This happens when one of these operators is used in an unparenthesised argument: < > <= >= lt gt le ge == != <=> eq ne cmp ~~ & | ^ && || // .. ... ?: = += -= *= etc. , => =head3 Smart-matching against array slices Previously, the following code resulted in a successful match: my @a = qw(a y0 z); my @b = qw(a x0 z); @a[0 .. $#b] ~~ @b; This odd behaviour has now been fixed [perl #77468]. =head3 Negation treats strings differently from before The unary negation operator, C<->, now treats strings that look like numbers as numbers [perl #57706]. =head3 Negative zero Negative zero (-0.0), when converted to a string, now becomes "0" on all platforms. It used to become "-0" on some, but "0" on others. If you still need to determine whether a zero is negative, use C<sprintf("%g", $zero) =~ /^-/> or the L<Data::Float> module on CPAN. =head3 C<:=> is now a syntax error Previously C<my $pi := 4> was exactly equivalent to C<my $pi : = 4>, with the C<:> being treated as the start of an attribute list, ending before the C<=>. The use of C<:=> to mean C<: => was deprecated in 5.12.0, and is now a syntax error. This allows future use of C<:=> as a new token. Outside the core's tests for it, we find no Perl 5 code on CPAN using this construction, so we believe that this change will have little impact on real-world codebases. If it is absolutely necessary to have empty attribute lists (for example, because of a code generator), simply avoid the error by adding a space before the C<=>. =head3 Change in the parsing of identifiers Characters outside the Unicode "XIDStart" set are no longer allowed at the beginning of an identifier. This means that certain accents and marks that normally follow an alphabetic character may no longer be the first character of an identifier. =head2 Threads and Processes =head3 Directory handles not copied to threads On systems other than Windows that do not have a C<fchdir> function, newly-created threads no longer inherit directory handles from their parent threads. Such programs would usually have crashed anyway [perl #75154]. =head3 C<close> on shared pipes To avoid deadlocks, the C<close> function no longer waits for the child process to exit if the underlying file descriptor is still in use by another thread. It returns true in such cases. =head3 fork() emulation will not wait for signalled children On Windows parent processes would not terminate until all forked children had terminated first. However, C<kill("KILL", ...)> is inherently unstable on pseudo-processes, and C<kill("TERM", ...)> might not get delivered if the child is blocked in a system call. To avoid the deadlock and still provide a safe mechanism to terminate the hosting process, Perl now no longer waits for children that have been sent a SIGTERM signal. It is up to the parent process to waitpid() for these children if child-cleanup processing must be allowed to finish. However, it is also then the responsibility of the parent to avoid the deadlock by making sure the child process can't be blocked on I/O. See L<perlfork> for more information about the fork() emulation on Windows. =head2 Configuration =head3 Naming fixes in Policy_sh.SH may invalidate Policy.sh Several long-standing typos and naming confusions in F<Policy_sh.SH> have been fixed, standardizing on the variable names used in F<config.sh>. This will change the behaviour of F<Policy.sh> if you happen to have been accidentally relying on its incorrect behaviour. =head3 Perl source code is read in text mode on Windows Perl scripts used to be read in binary mode on Windows for the benefit of the L<ByteLoader> module (which is no longer part of core Perl). This had the side-effect of breaking various operations on the C<DATA> filehandle, including seek()/tell(), and even simply reading from C<DATA> after filehandles have been flushed by a call to system(), backticks, fork() etc. The default build options for Windows have been changed to read Perl source code on Windows in text mode now. L<ByteLoader> will (hopefully) be updated on CPAN to automatically handle this situation [perl #28106]. =head1 Deprecations See also L</Deprecated C APIs>. =head2 Omitting a space between a regular expression and subsequent word Omitting the space between a regular expression operator or its modifiers and the following word is deprecated. For example, C<< m/foo/sand $bar >> is for now still parsed as C<< m/foo/s and $bar >>, but will now issue a warning. =head2 C<\cI<X>> The backslash-c construct was designed as a way of specifying non-printable characters, but there were no restrictions (on ASCII platforms) on what the character following the C<c> could be. Now, a deprecation warning is raised if that character isn't an ASCII character. Also, a deprecation warning is raised for C<"\c{"> (which is the same as simply saying C<";">). =head2 C<"\b{"> and C<"\B{"> In regular expressions, a literal C<"{"> immediately following a C<"\b"> (not in a bracketed character class) or a C<"\B{"> is now deprecated to allow for its future use by Perl itself. =head2 Perl 4-era .pl libraries Perl bundles a handful of library files that predate Perl 5. This bundling is now deprecated for most of these files, which are now available from CPAN. The affected files now warn when run, if they were installed as part of the core. This is a mandatory warning, not obeying B<-X> or lexical warning bits. The warning is modelled on that supplied by F<deprecate.pm> for deprecated-in-core F<.pm> libraries. It points to the specific CPAN distribution that contains the F<.pl> libraries. The CPAN versions, of course, do not generate the warning. =head2 List assignment to C<$[> Assignment to C<$[> was deprecated and started to give warnings in Perl version 5.12.0. This version of Perl (5.14) now also emits a warning when assigning to C<$[> in list context. This fixes an oversight in 5.12.0. =head2 Use of qw(...) as parentheses Historically the parser fooled itself into thinking that C<qw(...)> literals were always enclosed in parentheses, and as a result you could sometimes omit parentheses around them: for $x qw(a b c) { ... } The parser no longer lies to itself in this way. Wrap the list literal in parentheses like this: for $x (qw(a b c)) { ... } This is being deprecated because the parentheses in C<for $i (1,2,3) { ... }> are not part of expression syntax. They are part of the statement syntax, with the C<for> statement wanting literal parentheses. The synthetic parentheses that a C<qw> expression acquired were only intended to be treated as part of expression syntax. Note that this does not change the behaviour of cases like: use POSIX qw(setlocale localeconv); our @EXPORT = qw(foo bar baz); where parentheses were never required around the expression. =head2 C<\N{BELL}> This is because Unicode is using that name for a different character. See L</Unicode Version 6.0 is now supported (mostly)> for more explanation. =head2 C<?PATTERN?> C<?PATTERN?> (without the initial C<m>) has been deprecated and now produces a warning. This is to allow future use of C<?> in new operators. The match-once functionality is still available as C<m?PATTERN?>. =head2 Tie functions on scalars holding typeglobs Calling a tie function (C<tie>, C<tied>, C<untie>) with a scalar argument acts on a filehandle if the scalar happens to hold a typeglob. This is a long-standing bug that will be removed in Perl 5.16, as there is currently no way to tie the scalar itself when it holds a typeglob, and no way to untie a scalar that has had a typeglob assigned to it. Now there is a deprecation warning whenever a tie function is used on a handle without an explicit C<*>. =head2 User-defined case-mapping This feature is being deprecated due to its many issues, as documented in L<perlunicode/User-Defined Case Mappings (for serious hackers only)>. This feature will be removed in Perl 5.16. Instead use the CPAN module L<Unicode::Casing>, which provides improved functionality. =head2 Deprecated modules The following module will be removed from the core distribution in a future release, and should be installed from CPAN instead. Distributions on CPAN that require this should add it to their prerequisites. The core version of these module now issues a deprecation warning. If you ship a packaged version of Perl, either alone or as part of a larger system, then you should carefully consider the repercussions of core module deprecations. You may want to consider shipping your default build of Perl with a package for the deprecated module that installs into C<vendor> or C<site> Perl library directories. This will inhibit the deprecation warnings. Alternatively, you may want to consider patching F<lib/deprecate.pm> to provide deprecation warnings specific to your packaging system or distribution of Perl, consistent with how your packaging system or distribution manages a staged transition from a release where the installation of a single package provides the given functionality, to a later release where the system administrator needs to know to install multiple packages to get that same functionality. You can silence these deprecation warnings by installing the module in question from CPAN. To install the latest version of it by role rather than by name, just install C<Task::Deprecations::5_14>. =over =item L<Devel::DProf> We strongly recommend that you install and use L<Devel::NYTProf> instead of L<Devel::DProf>, as L<Devel::NYTProf> offers significantly improved profiling and reporting. =back =head1 Performance Enhancements =head2 "Safe signals" optimisation Signal dispatch has been moved from the runloop into control ops. This should give a few percent speed increase, and eliminates nearly all the speed penalty caused by the introduction of "safe signals" in 5.8.0. Signals should still be dispatched within the same statement as they were previously. If this does I<not> happen, or if you find it possible to create uninterruptible loops, this is a bug, and reports are encouraged of how to recreate such issues. =head2 Optimisation of shift() and pop() calls without arguments Two fewer OPs are used for shift() and pop() calls with no argument (with implicit C<@_>). This change makes shift() 5% faster than C<shift @_> on non-threaded perls, and 25% faster on threaded ones. =head2 Optimisation of regexp engine string comparison work The C<foldEQ_utf8> API function for case-insensitive comparison of strings (which is used heavily by the regexp engine) was substantially refactored and optimised -- and its documentation much improved as a free bonus. =head2 Regular expression compilation speed-up Compiling regular expressions has been made faster when upgrading the regex to utf8 is necessary but this isn't known when the compilation begins. =head2 String appending is 100 times faster When doing a lot of string appending, perls built to use the system's C<malloc> could end up allocating a lot more memory than needed in a inefficient way. C<sv_grow>, the function used to allocate more memory if necessary when appending to a string, has been taught to round up the memory it requests to a certain geometric progression, making it much faster on certain platforms and configurations. On Win32, it's now about 100 times faster. =head2 Eliminate C<PL_*> accessor functions under ithreads When C<MULTIPLICITY> was first developed, and interpreter state moved into an interpreter struct, thread- and interpreter-local C<PL_*> variables were defined as macros that called accessor functions (returning the address of the value) outside the Perl core. The intent was to allow members within the interpreter struct to change size without breaking binary compatibility, so that bug fixes could be merged to a maintenance branch that necessitated such a size change. This mechanism was redundant and penalised well-behaved code. It has been removed. =head2 Freeing weak references When there are many weak references to an object, freeing that object can under some circumstances take O(I<N*N>) time to free, where I<N> is the number of references. The circumstances in which this can happen have been reduced [perl #75254] =head2 Lexical array and hash assignments An earlier optimisation to speed up C<my @array = ...> and C<my %hash = ...> assignments caused a bug and was disabled in Perl 5.12.0. Now we have found another way to speed up these assignments [perl #82110]. =head2 C<@_> uses less memory Previously, C<@_> was allocated for every subroutine at compile time with enough space for four entries. Now this allocation is done on demand when the subroutine is called [perl #72416]. =head2 Size optimisations to SV and HV structures C<xhv_fill> has been eliminated from C<struct xpvhv>, saving 1 IV per hash and on some systems will cause C<struct xpvhv> to become cache-aligned. To avoid this memory saving causing a slowdown elsewhere, boolean use of C<HvFILL> now calls C<HvTOTALKEYS> instead (which is equivalent), so while the fill data when actually required are now calculated on demand, cases when this needs to be done should be rare. The order of structure elements in SV bodies has changed. Effectively, the NV slot has swapped location with STASH and MAGIC. As all access to SV members is via macros, this should be completely transparent. This change allows the space saving for PVHVs documented above, and may reduce the memory allocation needed for PVIVs on some architectures. C<XPV>, C<XPVIV>, and C<XPVNV> now allocate only the parts of the C<SV> body they actually use, saving some space. Scalars containing regular expressions now allocate only the part of the C<SV> body they actually use, saving some space. =head2 Memory consumption improvements to Exporter The C<@EXPORT_FAIL> AV is no longer created unless needed, hence neither is the typeglob backing it. This saves about 200 bytes for every package that uses Exporter but doesn't use this functionality. =head2 Memory savings for weak references For weak references, the common case of just a single weak reference per referent has been optimised to reduce the storage required. In this case it saves the equivalent of one small Perl array per referent. =head2 C<%+> and C<%-> use less memory The bulk of the C<Tie::Hash::NamedCapture> module used to be in the Perl core. It has now been moved to an XS module to reduce overhead for programs that do not use C<%+> or C<%->. =head2 Multiple small improvements to threads The internal structures of threading now make fewer API calls and fewer allocations, resulting in noticeably smaller object code. Additionally, many thread context checks have been deferred so they're done only as needed (although this is only possible for non-debugging builds). =head2 Adjacent pairs of nextstate opcodes are now optimized away Previously, in code such as use constant DEBUG => 0; sub GAK { warn if DEBUG; print "stuff\n"; } the ops for C<warn if DEBUG> would be folded to a C<null> op (C<ex-const>), but the C<nextstate> op would remain, resulting in a runtime op dispatch of C<nextstate>, C<nextstate>, etc. The execution of a sequence of C<nextstate> ops is indistinguishable from just the last C<nextstate> op so the peephole optimizer now eliminates the first of a pair of C<nextstate> ops except when the first carries a label, since labels must not be eliminated by the optimizer, and label usage isn't conclusively known at compile time. =head1 Modules and Pragmata =head2 New Modules and Pragmata =over 4 =item * L<CPAN::Meta::YAML> 0.003 has been added as a dual-life module. It supports a subset of YAML sufficient for reading and writing F<META.yml> and F<MYMETA.yml> files included with CPAN distributions or generated by the module installation toolchain. It should not be used for any other general YAML parsing or generation task. =item * L<CPAN::Meta> version 2.110440 has been added as a dual-life module. It provides a standard library to read, interpret and write CPAN distribution metadata files (like F<META.json> and F<META.yml>) that describe a distribution, its contents, and the requirements for building it and installing it. The latest CPAN distribution metadata specification is included as L<CPAN::Meta::Spec> and notes on changes in the specification over time are given in L<CPAN::Meta::History>. =item * L<HTTP::Tiny> 0.012 has been added as a dual-life module. It is a very small, simple HTTP/1.1 client designed for simple GET requests and file mirroring. It has been added so that F<CPAN.pm> and L<CPANPLUS> can "bootstrap" HTTP access to CPAN using pure Perl without relying on external binaries like L<curl(1)> or L<wget(1)>. =item * L<JSON::PP> 2.27105 has been added as a dual-life module to allow CPAN clients to read F<META.json> files in CPAN distributions. =item * L<Module::Metadata> 1.000004 has been added as a dual-life module. It gathers package and POD information from Perl module files. It is a standalone module based on L<Module::Build::ModuleInfo> for use by other module installation toolchain components. L<Module::Build::ModuleInfo> has been deprecated in favor of this module instead. =item * L<Perl::OSType> 1.002 has been added as a dual-life module. It maps Perl operating system names (like "dragonfly" or "MSWin32") to more generic types with standardized names (like "Unix" or "Windows"). It has been refactored out of L<Module::Build> and L<ExtUtils::CBuilder> and consolidates such mappings into a single location for easier maintenance. =item * The following modules were added by the L<Unicode::Collate> upgrade. See below for details. L<Unicode::Collate::CJK::Big5> L<Unicode::Collate::CJK::GB2312> L<Unicode::Collate::CJK::JISX0208> L<Unicode::Collate::CJK::Korean> L<Unicode::Collate::CJK::Pinyin> L<Unicode::Collate::CJK::Stroke> =item * L<Version::Requirements> version 0.101020 has been added as a dual-life module. It provides a standard library to model and manipulates module prerequisites and version constraints defined in L<CPAN::Meta::Spec>. =back =head2 Updated Modules and Pragma =over 4 =item * L<attributes> has been upgraded from version 0.12 to 0.14. =item * L<Archive::Extract> has been upgraded from version 0.38 to 0.48. Updates since 0.38 include: a safe print method that guards L<Archive::Extract> from changes to C<$\>; a fix to the tests when run in core Perl; support for TZ files; a modification for the lzma logic to favour L<IO::Uncompress::Unlzma>; and a fix for an issue with NetBSD-current and its new L<unzip(1)> executable. =item * L<Archive::Tar> has been upgraded from version 1.54 to 1.76. Important changes since 1.54 include the following: =over =item * Compatibility with busybox implementations of L<tar(1)>. =item * A fix so that write() and create_archive() close only filehandles they themselves opened. =item * A bug was fixed regarding the exit code of extract_archive. =item * The L<ptar(1)> utility has a new option to allow safe creation of tarballs without world-writable files on Windows, allowing those archives to be uploaded to CPAN. =item * A new L<ptargrep(1)> utility for using regular expressions against the contents of files in a tar archive. =item * L<pax> extended headers are now skipped. =back =item * L<Attribute::Handlers> has been upgraded from version 0.87 to 0.89. =item * L<autodie> has been upgraded from version 2.06_01 to 2.1001. =item * L<AutoLoader> has been upgraded from version 5.70 to 5.71. =item * The L<B> module has been upgraded from version 1.23 to 1.29. It no longer crashes when taking apart a C<y///> containing characters outside the octet range or compiled in a C<use utf8> scope. The size of the shared object has been reduced by about 40%, with no reduction in functionality. =item * L<B::Concise> has been upgraded from version 0.78 to 0.83. L<B::Concise> marks rv2sv(), rv2av(), and rv2hv() ops with the new C<OPpDEREF> flag as "DREFed". It no longer produces mangled output with the B<-tree> option [perl #80632]. =item * L<B::Debug> has been upgraded from version 1.12 to 1.16. =item * L<B::Deparse> has been upgraded from version 0.96 to 1.03. The deparsing of a C<nextstate> op has changed when it has both a change of package relative to the previous nextstate, or a change of C<%^H> or other state and a label. The label was previously emitted first, but is now emitted last (5.12.1). The C<no 5.13.2> or similar form is now correctly handled by L<B::Deparse> (5.12.3). L<B::Deparse> now properly handles the code that applies a conditional pattern match against implicit C<$_> as it was fixed in [perl #20444]. Deparsing of C<our> followed by a variable with funny characters (as permitted under the C<use utf8> pragma) has also been fixed [perl #33752]. =item * L<B::Lint> has been upgraded from version 1.11_01 to 1.13. =item * L<base> has been upgraded from version 2.15 to 2.16. =item * L<Benchmark> has been upgraded from version 1.11 to 1.12. =item * L<bignum> has been upgraded from version 0.23 to 0.27. =item * L<Carp> has been upgraded from version 1.15 to 1.20. L<Carp> now detects incomplete L<caller()|perlfunc/"caller EXPR"> overrides and avoids using bogus C<@DB::args>. To provide backtraces, Carp relies on particular behaviour of the caller() builtin. L<Carp> now detects if other code has overridden this with an incomplete implementation, and modifies its backtrace accordingly. Previously incomplete overrides would cause incorrect values in backtraces (best case), or obscure fatal errors (worst case). This fixes certain cases of "Bizarre copy of ARRAY" caused by modules overriding caller() incorrectly (5.12.2). It now also avoids using regular expressions that cause Perl to load its Unicode tables, so as to avoid the "BEGIN not safe after errors" error that ensue if there has been a syntax error [perl #82854]. =item * L<CGI> has been upgraded from version 3.48 to 3.52. This provides the following security fixes: the MIME boundary in multipart_init() is now random and the handling of newlines embedded in header values has been improved. =item * L<Compress::Raw::Bzip2> has been upgraded from version 2.024 to 2.033. It has been updated to use L<bzip2(1)> 1.0.6. =item * L<Compress::Raw::Zlib> has been upgraded from version 2.024 to 2.033. =item * L<constant> has been upgraded from version 1.20 to 1.21. Unicode constants work once more. They have been broken since Perl 5.10.0 [CPAN RT #67525]. =item * L<CPAN> has been upgraded from version 1.94_56 to 1.9600. Major highlights: =over 4 =item * much less configuration dialog hassle =item * support for F<META/MYMETA.json> =item * support for L<local::lib> =item * support for L<HTTP::Tiny> to reduce the dependency on FTP sites =item * automatic mirror selection =item * iron out all known bugs in configure_requires =item * support for distributions compressed with L<bzip2(1)> =item * allow F<Foo/Bar.pm> on the command line to mean C<Foo::Bar> =back =item * L<CPANPLUS> has been upgraded from version 0.90 to 0.9103. A change to F<cpanp-run-perl> resolves L<RT #55964|http://rt.cpan.org/Public/Bug/Display.html?id=55964> and L<RT #57106|http://rt.cpan.org/Public/Bug/Display.html?id=57106>, both of which related to failures to install distributions that use C<Module::Install::DSL> (5.12.2). A dependency on L<Config> was not recognised as a core module dependency. This has been fixed. L<CPANPLUS> now includes support for F<META.json> and F<MYMETA.json>. =item * L<CPANPLUS::Dist::Build> has been upgraded from version 0.46 to 0.54. =item * L<Data::Dumper> has been upgraded from version 2.125 to 2.130_02. The indentation used to be off when C<$Data::Dumper::Terse> was set. This has been fixed [perl #73604]. This upgrade also fixes a crash when using custom sort functions that might cause the stack to change [perl #74170]. L<Dumpxs> no longer crashes with globs returned by C<*$io_ref> [perl #72332]. =item * L<DB_File> has been upgraded from version 1.820 to 1.821. =item * L<DBM_Filter> has been upgraded from version 0.03 to 0.04. =item * L<Devel::DProf> has been upgraded from version 20080331.00 to 20110228.00. Merely loading L<Devel::DProf> now no longer triggers profiling to start. Both C<use Devel::DProf> and C<perl -d:DProf ...> behave as before and start the profiler. B<NOTE>: L<Devel::DProf> is deprecated and will be removed from a future version of Perl. We strongly recommend that you install and use L<Devel::NYTProf> instead, as it offers significantly improved profiling and reporting. =item * L<Devel::Peek> has been upgraded from version 1.04 to 1.07. =item * L<Devel::SelfStubber> has been upgraded from version 1.03 to 1.05. =item * L<diagnostics> has been upgraded from version 1.19 to 1.22. It now renders pod links slightly better, and has been taught to find descriptions for messages that share their descriptions with other messages. =item * L<Digest::MD5> has been upgraded from version 2.39 to 2.51. It is now safe to use this module in combination with threads. =item * L<Digest::SHA> has been upgraded from version 5.47 to 5.61. C<shasum> now more closely mimics L<sha1sum(1)>/L<md5sum(1)>. C<addfile> accepts all POSIX filenames. New SHA-512/224 and SHA-512/256 transforms (ref. NIST Draft FIPS 180-4 [February 2011]) =item * L<DirHandle> has been upgraded from version 1.03 to 1.04. =item * L<Dumpvalue> has been upgraded from version 1.13 to 1.16. =item * L<DynaLoader> has been upgraded from version 1.10 to 1.13. It fixes a buffer overflow when passed a very long file name. It no longer inherits from L<AutoLoader>; hence it no longer produces weird error messages for unsuccessful method calls on classes that inherit from L<DynaLoader> [perl #84358]. =item * L<Encode> has been upgraded from version 2.39 to 2.42. Now, all 66 Unicode non-characters are treated the same way U+FFFF has always been treated: in cases when it was disallowed, all 66 are disallowed, and in cases where it warned, all 66 warn. =item * L<Env> has been upgraded from version 1.01 to 1.02. =item * L<Errno> has been upgraded from version 1.11 to 1.13. The implementation of L<Errno> has been refactored to use about 55% less memory. On some platforms with unusual header files, like Win32 L<gcc(1)> using C<mingw64> headers, some constants that weren't actually error numbers have been exposed by L<Errno>. This has been fixed [perl #77416]. =item * L<Exporter> has been upgraded from version 5.64_01 to 5.64_03. Exporter no longer overrides C<$SIG{__WARN__}> [perl #74472] =item * L<ExtUtils::CBuilder> has been upgraded from version 0.27 to 0.280203. =item * L<ExtUtils::Command> has been upgraded from version 1.16 to 1.17. =item * L<ExtUtils::Constant> has been upgraded from 0.22 to 0.23. The L<AUTOLOAD> helper code generated by C<ExtUtils::Constant::ProxySubs> can now croak() for missing constants, or generate a complete C<AUTOLOAD> subroutine in XS, allowing simplification of many modules that use it (L<Fcntl>, L<File::Glob>, L<GDBM_File>, L<I18N::Langinfo>, L<POSIX>, L<Socket>). L<ExtUtils::Constant::ProxySubs> can now optionally push the names of all constants onto the package's C<@EXPORT_OK>. =item * L<ExtUtils::Install> has been upgraded from version 1.55 to 1.56. =item * L<ExtUtils::MakeMaker> has been upgraded from version 6.56 to 6.57_05. =item * L<ExtUtils::Manifest> has been upgraded from version 1.57 to 1.58. =item * L<ExtUtils::ParseXS> has been upgraded from version 2.21 to 2.2210. =item * L<Fcntl> has been upgraded from version 1.06 to 1.11. =item * L<File::Basename> has been upgraded from version 2.78 to 2.82. =item * L<File::CheckTree> has been upgraded from version 4.4 to 4.41. =item * L<File::Copy> has been upgraded from version 2.17 to 2.21. =item * L<File::DosGlob> has been upgraded from version 1.01 to 1.04. It allows patterns containing literal parentheses: they no longer need to be escaped. On Windows, it no longer adds an extra F<./> to file names returned when the pattern is a relative glob with a drive specification, like F<C:*.pl> [perl #71712]. =item * L<File::Fetch> has been upgraded from version 0.24 to 0.32. L<HTTP::Lite> is now supported for the "http" scheme. The L<fetch(1)> utility is supported on FreeBSD, NetBSD, and Dragonfly BSD for the C<http> and C<ftp> schemes. =item * L<File::Find> has been upgraded from version 1.15 to 1.19. It improves handling of backslashes on Windows, so that paths like F<C:\dir\/file> are no longer generated [perl #71710]. =item * L<File::Glob> has been upgraded from version 1.07 to 1.12. =item * L<File::Spec> has been upgraded from version 3.31 to 3.33. Several portability fixes were made in L<File::Spec::VMS>: a colon is now recognized as a delimiter in native filespecs; caret-escaped delimiters are recognized for better handling of extended filespecs; catpath() returns an empty directory rather than the current directory if the input directory name is empty; and abs2rel() properly handles Unix-style input (5.12.2). =item * L<File::stat> has been upgraded from 1.02 to 1.05. The C<-x> and C<-X> file test operators now work correctly when run by the superuser. =item * L<Filter::Simple> has been upgraded from version 0.84 to 0.86. =item * L<GDBM_File> has been upgraded from 1.10 to 1.14. This fixes a memory leak when DBM filters are used. =item * L<Hash::Util> has been upgraded from 0.07 to 0.11. L<Hash::Util> no longer emits spurious "uninitialized" warnings when recursively locking hashes that have undefined values [perl #74280]. =item * L<Hash::Util::FieldHash> has been upgraded from version 1.04 to 1.09. =item * L<I18N::Collate> has been upgraded from version 1.01 to 1.02. =item * L<I18N::Langinfo> has been upgraded from version 0.03 to 0.08. langinfo() now defaults to using C<$_> if there is no argument given, just as the documentation has always claimed. =item * L<I18N::LangTags> has been upgraded from version 0.35 to 0.35_01. =item * L<if> has been upgraded from version 0.05 to 0.0601. =item * L<IO> has been upgraded from version 1.25_02 to 1.25_04. This version of L<IO> includes a new L<IO::Select>, which now allows L<IO::Handle> objects (and objects in derived classes) to be removed from an L<IO::Select> set even if the underlying file descriptor is closed or invalid. =item * L<IPC::Cmd> has been upgraded from version 0.54 to 0.70. Resolves an issue with splitting Win32 command lines. An argument consisting of the single character "0" used to be omitted (CPAN RT #62961). =item * L<IPC::Open3> has been upgraded from 1.05 to 1.09. open3() now produces an error if the C<exec> call fails, allowing this condition to be distinguished from a child process that exited with a non-zero status [perl #72016]. The internal xclose() routine now knows how to handle file descriptors as documented, so duplicating C<STDIN> in a child process using its file descriptor now works [perl #76474]. =item * L<IPC::SysV> has been upgraded from version 2.01 to 2.03. =item * L<lib> has been upgraded from version 0.62 to 0.63. =item * L<Locale::Maketext> has been upgraded from version 1.14 to 1.19. L<Locale::Maketext> now supports external caches. This upgrade also fixes an infinite loop in C<Locale::Maketext::Guts::_compile()> when working with tainted values (CPAN RT #40727). C<< ->maketext >> calls now back up and restore C<$@> so error messages are not suppressed (CPAN RT #34182). =item * L<Log::Message> has been upgraded from version 0.02 to 0.04. =item * L<Log::Message::Simple> has been upgraded from version 0.06 to 0.08. =item * L<Math::BigInt> has been upgraded from version 1.89_01 to 1.994. This fixes, among other things, incorrect results when computing binomial coefficients [perl #77640]. It also prevents C<sqrt($int)> from crashing under C<use bigrat>. [perl #73534]. =item * L<Math::BigInt::FastCalc> has been upgraded from version 0.19 to 0.28. =item * L<Math::BigRat> has been upgraded from version 0.24 to 0.26_02. =item * L<Memoize> has been upgraded from version 1.01_03 to 1.02. =item * L<MIME::Base64> has been upgraded from 3.08 to 3.13. Includes new functions to calculate the length of encoded and decoded base64 strings. Now provides encode_base64url() and decode_base64url() functions to process the base64 scheme for "URL applications". =item * L<Module::Build> has been upgraded from version 0.3603 to 0.3800. A notable change is the deprecation of several modules. L<Module::Build::Version> has been deprecated and L<Module::Build> now relies on the L<version> pragma directly. L<Module::Build::ModuleInfo> has been deprecated in favor of a standalone copy called L<Module::Metadata>. L<Module::Build::YAML> has been deprecated in favor of L<CPAN::Meta::YAML>. L<Module::Build> now also generates F<META.json> and F<MYMETA.json> files in accordance with version 2 of the CPAN distribution metadata specification, L<CPAN::Meta::Spec>. The older format F<META.yml> and F<MYMETA.yml> files are still generated. =item * L<Module::CoreList> has been upgraded from version 2.29 to 2.47. Besides listing the updated core modules of this release, it also stops listing the C<Filespec> module. That module never existed in core. The scripts generating L<Module::CoreList> confused it with L<VMS::Filespec>, which actually is a core module as of Perl 5.8.7. =item * L<Module::Load> has been upgraded from version 0.16 to 0.18. =item * L<Module::Load::Conditional> has been upgraded from version 0.34 to 0.44. =item * The L<mro> pragma has been upgraded from version 1.02 to 1.07. =item * L<NDBM_File> has been upgraded from version 1.08 to 1.12. This fixes a memory leak when DBM filters are used. =item * L<Net::Ping> has been upgraded from version 2.36 to 2.38. =item * L<NEXT> has been upgraded from version 0.64 to 0.65. =item * L<Object::Accessor> has been upgraded from version 0.36 to 0.38. =item * L<ODBM_File> has been upgraded from version 1.07 to 1.10. This fixes a memory leak when DBM filters are used. =item * L<Opcode> has been upgraded from version 1.15 to 1.18. =item * The L<overload> pragma has been upgraded from 1.10 to 1.13. C<overload::Method> can now handle subroutines that are themselves blessed into overloaded classes [perl #71998]. The documentation has greatly improved. See L</Documentation> below. =item * L<Params::Check> has been upgraded from version 0.26 to 0.28. =item * The L<parent> pragma has been upgraded from version 0.223 to 0.225. =item * L<Parse::CPAN::Meta> has been upgraded from version 1.40 to 1.4401. The latest Parse::CPAN::Meta can now read YAML and JSON files using L<CPAN::Meta::YAML> and L<JSON::PP>, which are now part of the Perl core. =item * L<PerlIO::encoding> has been upgraded from version 0.12 to 0.14. =item * L<PerlIO::scalar> has been upgraded from 0.07 to 0.11. A read() after a seek() beyond the end of the string no longer thinks it has data to read [perl #78716]. =item * L<PerlIO::via> has been upgraded from version 0.09 to 0.11. =item * L<Pod::Html> has been upgraded from version 1.09 to 1.11. =item * L<Pod::LaTeX> has been upgraded from version 0.58 to 0.59. =item * L<Pod::Perldoc> has been upgraded from version 3.15_02 to 3.15_03. =item * L<Pod::Simple> has been upgraded from version 3.13 to 3.16. =item * L<POSIX> has been upgraded from 1.19 to 1.24. It now includes constants for POSIX signal constants. =item * The L<re> pragma has been upgraded from version 0.11 to 0.18. The C<use re '/flags'> subpragma is new. The regmust() function used to crash when called on a regular expression belonging to a pluggable engine. Now it croaks instead. regmust() no longer leaks memory. =item * L<Safe> has been upgraded from version 2.25 to 2.29. Coderefs returned by reval() and rdo() are now wrapped via wrap_code_refs() (5.12.1). This fixes a possible infinite loop when looking for coderefs. It adds several C<version::vxs::*> routines to the default share. =item * L<SDBM_File> has been upgraded from version 1.06 to 1.09. =item * L<SelfLoader> has been upgraded from 1.17 to 1.18. It now works in taint mode [perl #72062]. =item * The L<sigtrap> pragma has been upgraded from version 1.04 to 1.05. It no longer tries to modify read-only arguments when generating a backtrace [perl #72340]. =item * L<Socket> has been upgraded from version 1.87 to 1.94. See L</Improved IPv6 support> above. =item * L<Storable> has been upgraded from version 2.22 to 2.27. Includes performance improvement for overloaded classes. This adds support for serialising code references that contain UTF-8 strings correctly. The L<Storable> minor version number changed as a result, meaning that L<Storable> users who set C<$Storable::accept_future_minor> to a C<FALSE> value will see errors (see L<Storable/FORWARD COMPATIBILITY> for more details). Freezing no longer gets confused if the Perl stack gets reallocated during freezing [perl #80074]. =item * L<Sys::Hostname> has been upgraded from version 1.11 to 1.16. =item * L<Term::ANSIColor> has been upgraded from version 2.02 to 3.00. =item * L<Term::UI> has been upgraded from version 0.20 to 0.26. =item * L<Test::Harness> has been upgraded from version 3.17 to 3.23. =item * L<Test::Simple> has been upgraded from version 0.94 to 0.98. Among many other things, subtests without a C<plan> or C<no_plan> now have an implicit done_testing() added to them. =item * L<Thread::Semaphore> has been upgraded from version 2.09 to 2.12. It provides two new methods that give more control over the decrementing of semaphores: C<down_nb> and C<down_force>. =item * L<Thread::Queue> has been upgraded from version 2.11 to 2.12. =item * The L<threads> pragma has been upgraded from version 1.75 to 1.83. =item * The L<threads::shared> pragma has been upgraded from version 1.32 to 1.37. =item * L<Tie::Hash> has been upgraded from version 1.03 to 1.04. Calling C<< Tie::Hash->TIEHASH() >> used to loop forever. Now it C<croak>s. =item * L<Tie::Hash::NamedCapture> has been upgraded from version 0.06 to 0.08. =item * L<Tie::RefHash> has been upgraded from version 1.38 to 1.39. =item * L<Time::HiRes> has been upgraded from version 1.9719 to 1.9721_01. =item * L<Time::Local> has been upgraded from version 1.1901_01 to 1.2000. =item * L<Time::Piece> has been upgraded from version 1.15_01 to 1.20_01. =item * L<Unicode::Collate> has been upgraded from version 0.52_01 to 0.73. L<Unicode::Collate> has been updated to use Unicode 6.0.0. L<Unicode::Collate::Locale> now supports a plethora of new locales: I<ar, be, bg, de__phonebook, hu, hy, kk, mk, nso, om, tn, vi, hr, ig, ja, ko, ru, sq, se, sr, to, uk, zh, zh__big5han, zh__gb2312han, zh__pinyin>, and I<zh__stroke>. The following modules have been added: L<Unicode::Collate::CJK::Big5> for C<zh__big5han> which makes tailoring of CJK Unified Ideographs in the order of CLDR's big5han ordering. L<Unicode::Collate::CJK::GB2312> for C<zh__gb2312han> which makes tailoring of CJK Unified Ideographs in the order of CLDR's gb2312han ordering. L<Unicode::Collate::CJK::JISX0208> which makes tailoring of 6355 kanji (CJK Unified Ideographs) in the JIS X 0208 order. L<Unicode::Collate::CJK::Korean> which makes tailoring of CJK Unified Ideographs in the order of CLDR's Korean ordering. L<Unicode::Collate::CJK::Pinyin> for C<zh__pinyin> which makes tailoring of CJK Unified Ideographs in the order of CLDR's pinyin ordering. L<Unicode::Collate::CJK::Stroke> for C<zh__stroke> which makes tailoring of CJK Unified Ideographs in the order of CLDR's stroke ordering. This also sees the switch from using the pure-Perl version of this module to the XS version. =item * L<Unicode::Normalize> has been upgraded from version 1.03 to 1.10. =item * L<Unicode::UCD> has been upgraded from version 0.27 to 0.32. A new function, Unicode::UCD::num(), has been added. This function returns the numeric value of the string passed it or C<undef> if the string in its entirety has no "safe" numeric value. (For more detail, and for the definition of "safe", see L<Unicode::UCD/num()>.) This upgrade also includes several bug fixes: =over 4 =item charinfo() =over 4 =item * It is now updated to Unicode Version 6.0.0 with I<Corrigendum #8>, excepting that, just as with Perl 5.14, the code point at U+1F514 has no name. =item * Hangul syllable code points have the correct names, and their decompositions are always output without requiring L<Lingua::KO::Hangul::Util> to be installed. =item * CJK (Chinese-Japanese-Korean) code points U+2A700 to U+2B734 and U+2B740 to U+2B81D are now properly handled. =item * Numeric values are now output for those CJK code points that have them. =item * Names output for code points with multiple aliases are now the corrected ones. =back =item charscript() This now correctly returns "Unknown" instead of C<undef> for the script of a code point that hasn't been assigned another one. =item charblock() This now correctly returns "No_Block" instead of C<undef> for the block of a code point that hasn't been assigned to another one. =back =item * The L<version> pragma has been upgraded from 0.82 to 0.88. Because of a bug, now fixed, the is_strict() and is_lax() functions did not work when exported (5.12.1). =item * The L<warnings> pragma has been upgraded from version 1.09 to 1.12. Calling C<use warnings> without arguments is now significantly more efficient. =item * The L<warnings::register> pragma has been upgraded from version 1.01 to 1.02. It is now possible to register warning categories other than the names of packages using L<warnings::register>. See L<perllexwarn(1)> for more information. =item * L<XSLoader> has been upgraded from version 0.10 to 0.13. =item * L<VMS::DCLsym> has been upgraded from version 1.03 to 1.05. Two bugs have been fixed [perl #84086]: The symbol table name was lost when tying a hash, due to a thinko in C<TIEHASH>. The result was that all tied hashes interacted with the local symbol table. Unless a symbol table name had been explicitly specified in the call to the constructor, querying the special key C<:LOCAL> failed to identify objects connected to the local symbol table. =item * The L<Win32> module has been upgraded from version 0.39 to 0.44. This release has several new functions: Win32::GetSystemMetrics(), Win32::GetProductInfo(), Win32::GetOSDisplayName(). The names returned by Win32::GetOSName() and Win32::GetOSDisplayName() have been corrected. =item * L<XS::Typemap> has been upgraded from version 0.03 to 0.05. =back =head2 Removed Modules and Pragmata As promised in Perl 5.12.0's release notes, the following modules have been removed from the core distribution, and if needed should be installed from CPAN instead. =over =item * L<Class::ISA> has been removed from the Perl core. Prior version was 0.36. =item * L<Pod::Plainer> has been removed from the Perl core. Prior version was 1.02. =item * L<Switch> has been removed from the Perl core. Prior version was 2.16. =back The removal of L<Shell> has been deferred until after 5.14, as the implementation of L<Shell> shipped with 5.12.0 did not correctly issue the warning that it was to be removed from core. =head1 Documentation =head2 New Documentation =head3 L<perlgpl> L<perlgpl> has been updated to contain GPL version 1, as is included in the F<README> distributed with Perl (5.12.1). =head3 Perl 5.12.x delta files The perldelta files for Perl 5.12.1 to 5.12.3 have been added from the maintenance branch: L<perl5121delta>, L<perl5122delta>, L<perl5123delta>. =head3 L<perlpodstyle> New style guide for POD documentation, split mostly from the NOTES section of the L<pod2man(1)> manpage. =head3 L<perlsource>, L<perlinterp>, L<perlhacktut>, and L<perlhacktips> See L</perlhack and perlrepository revamp>, below. =head2 Changes to Existing Documentation =head3 L<perlmodlib> is now complete The L<perlmodlib> manpage that came with Perl 5.12.0 was missing several modules due to a bug in the script that generates the list. This has been fixed [perl #74332] (5.12.1). =head3 Replace incorrect tr/// table in L<perlebcdic> L<perlebcdic> contains a helpful table to use in C<tr///> to convert between EBCDIC and Latin1/ASCII. The table was the inverse of the one it describes, though the code that used the table worked correctly for the specific example given. The table has been corrected and the sample code changed to correspond. The table has also been changed to hex from octal, and the recipes in the pod have been altered to print out leading zeros to make all values the same length. =head3 Tricks for user-defined casing L<perlunicode> now contains an explanation of how to override, mangle and otherwise tweak the way Perl handles upper-, lower- and other-case conversions on Unicode data, and how to provide scoped changes to alter one's own code's behaviour without stomping on anybody else's. =head3 INSTALL explicitly states that Perl requires a C89 compiler This was already true, but it's now Officially Stated For The Record (5.12.2). =head3 Explanation of C<\xI<HH>> and C<\oI<OOO>> escapes L<perlop> has been updated with more detailed explanation of these two character escapes. =head3 B<-0I<NNN>> switch In L<perlrun>, the behaviour of the B<-0NNN> switch for B<-0400> or higher has been clarified (5.12.2). =head3 Maintenance policy L<perlpolicy> now contains the policy on what patches are acceptable for maintenance branches (5.12.1). =head3 Deprecation policy L<perlpolicy> now contains the policy on compatibility and deprecation along with definitions of terms like "deprecation" (5.12.2). =head3 New descriptions in L<perldiag> The following existing diagnostics are now documented: =over 4 =item * L<Ambiguous use of %c resolved as operator %c|perldiag/"Ambiguous use of %c resolved as operator %c"> =item * L<Ambiguous use of %c{%s} resolved to %c%s|perldiag/"Ambiguous use of %c{%s} resolved to %c%s"> =item * L<Ambiguous use of %c{%s[...]} resolved to %c%s[...]|perldiag/"Ambiguous use of %c{%s[...]} resolved to %c%s[...]"> =item * L<Ambiguous use of %c{%s{...}} resolved to %c%s{...}|perldiag/"Ambiguous use of %c{%s{...}} resolved to %c%s{...}"> =item * L<Ambiguous use of -%s resolved as -&%s()|perldiag/"Ambiguous use of -%s resolved as -&%s()"> =item * L<Invalid strict version format (%s)|perldiag/"Invalid strict version format (%s)"> =item * L<Invalid version format (%s)|perldiag/"Invalid version format (%s)"> =item * L<Invalid version object|perldiag/"Invalid version object"> =back =head3 L<perlbook> L<perlbook> has been expanded to cover many more popular books. =head3 C<SvTRUE> macro The documentation for the C<SvTRUE> macro in L<perlapi> was simply wrong in stating that get-magic is not processed. It has been corrected. =head3 op manipulation functions Several API functions that process optrees have been newly documented. =head3 L<perlvar> revamp L<perlvar> reorders the variables and groups them by topic. Each variable introduced after Perl 5.000 notes the first version in which it is available. L<perlvar> also has a new section for deprecated variables to note when they were removed. =head3 Array and hash slices in scalar context These are now documented in L<perldata>. =head3 C<use locale> and formats L<perlform> and L<perllocale> have been corrected to state that C<use locale> affects formats. =head3 L<overload> L<overload>'s documentation has practically undergone a rewrite. It is now much more straightforward and clear. =head3 perlhack and perlrepository revamp The L<perlhack> document is now much shorter, and focuses on the Perl 5 development process and submitting patches to Perl. The technical content has been moved to several new documents, L<perlsource>, L<perlinterp>, L<perlhacktut>, and L<perlhacktips>. This technical content has been only lightly edited. The perlrepository document has been renamed to L<perlgit>. This new document is just a how-to on using git with the Perl source code. Any other content that used to be in perlrepository has been moved to L<perlhack>. =head3 Time::Piece examples Examples in L<perlfaq4> have been updated to show the use of L<Time::Piece>. =head1 Diagnostics The following additions or changes have been made to diagnostic output, including warnings and fatal error messages. For the complete list of diagnostic messages, see L<perldiag>. =head2 New Diagnostics =head3 New Errors =over =item Closure prototype called This error occurs when a subroutine reference passed to an attribute handler is called, if the subroutine is a closure [perl #68560]. =item Insecure user-defined property %s Perl detected tainted data when trying to compile a regular expression that contains a call to a user-defined character property function, meaning C<\p{IsFoo}> or C<\p{InFoo}>. See L<perlunicode/User-Defined Character Properties> and L<perlsec>. =item panic: gp_free failed to free glob pointer - something is repeatedly re-creating entries This new error is triggered if a destructor called on an object in a typeglob that is being freed creates a new typeglob entry containing an object with a destructor that creates a new entry containing an object etc. =item Parsing code internal error (%s) This new fatal error is produced when parsing code supplied by an extension violates the parser's API in a detectable way. =item refcnt: fd %d%s This new error only occurs if an internal consistency check fails when a pipe is about to be closed. =item Regexp modifier "/%c" may not appear twice The regular expression pattern has one of the mutually exclusive modifiers repeated. =item Regexp modifiers "/%c" and "/%c" are mutually exclusive The regular expression pattern has more than one of the mutually exclusive modifiers. =item Using !~ with %s doesn't make sense This error occurs when C<!~> is used with C<s///r> or C<y///r>. =back =head3 New Warnings =over =item "\b{" is deprecated; use "\b\{" instead =item "\B{" is deprecated; use "\B\{" instead Use of an unescaped "{" immediately following a C<\b> or C<\B> is now deprecated in order to reserve its use for Perl itself in a future release. =item Operation "%s" returns its argument for ... Performing an operation requiring Unicode semantics (such as case-folding) on a Unicode surrogate or a non-Unicode character now triggers this warning. =item Use of qw(...) as parentheses is deprecated See L</"Use of qw(...) as parentheses">, above, for details. =back =head2 Changes to Existing Diagnostics =over 4 =item * The "Variable $foo is not imported" warning that precedes a C<strict 'vars'> error has now been assigned the "misc" category, so that C<no warnings> will suppress it [perl #73712]. =item * warn() and die() now produce "Wide character" warnings when fed a character outside the byte range if C<STDERR> is a byte-sized handle. =item * The "Layer does not match this perl" error message has been replaced with these more helpful messages [perl #73754]: =over 4 =item * PerlIO layer function table size (%d) does not match size expected by this perl (%d) =item * PerlIO layer instance size (%d) does not match size expected by this perl (%d) =back =item * The "Found = in conditional" warning that is emitted when a constant is assigned to a variable in a condition is now withheld if the constant is actually a subroutine or one generated by C<use constant>, since the value of the constant may not be known at the time the program is written [perl #77762]. =item * Previously, if none of the gethostbyaddr(), gethostbyname() and gethostent() functions were implemented on a given platform, they would all die with the message "Unsupported socket function 'gethostent' called", with analogous messages for getnet*() and getserv*(). This has been corrected. =item * The warning message about unrecognized regular expression escapes passed through has been changed to include any literal "{" following the two-character escape. For example, "\q{" is now emitted instead of "\q". =back =head1 Utility Changes =head3 L<perlbug(1)> =over 4 =item * L<perlbug> now looks in the EMAIL environment variable for a return address if the REPLY-TO and REPLYTO variables are empty. =item * L<perlbug> did not previously generate a "From:" header, potentially resulting in dropped mail; it now includes that header. =item * The user's address is now used as the Return-Path. Many systems these days don't have a valid Internet domain name, and perlbug@perl.org does not accept email with a return-path that does not resolve. So the user's address is now passed to sendmail so it's less likely to get stuck in a mail queue somewhere [perl #82996]. =item * L<perlbug> now always gives the reporter a chance to change the email address it guesses for them (5.12.2). =item * L<perlbug> should no longer warn about uninitialized values when using the B<-d> and B<-v> options (5.12.2). =back =head3 L<perl5db.pl> =over =item * The remote terminal works after forking and spawns new sessions, one per forked process. =back =head3 L<ptargrep> =over 4 =item * L<ptargrep> is a new utility to apply pattern matching to the contents of files in a tar archive. It comes with C<Archive::Tar>. =back =head1 Configuration and Compilation See also L</"Naming fixes in Policy_sh.SH may invalidate Policy.sh">, above. =over 4 =item * CCINCDIR and CCLIBDIR for the mingw64 cross-compiler are now correctly under F<$(CCHOME)\mingw\include> and F<\lib> rather than immediately below F<$(CCHOME)>. This means the "incpath", "libpth", "ldflags", "lddlflags" and "ldflags_nolargefiles" values in F<Config.pm> and F<Config_heavy.pl> are now set correctly. =item * C<make test.valgrind> has been adjusted to account for F<cpan/dist/ext> separation. =item * On compilers that support it, B<-Wwrite-strings> is now added to cflags by default. =item * The L<Encode> module can now (once again) be included in a static Perl build. The special-case handling for this situation got broken in Perl 5.11.0, and has now been repaired. =item * The previous default size of a PerlIO buffer (4096 bytes) has been increased to the larger of 8192 bytes and your local BUFSIZ. Benchmarks show that doubling this decade-old default increases read and write performance by around 25% to 50% when using the default layers of perlio on top of unix. To choose a non-default size, such as to get back the old value or to obtain an even larger value, configure with: ./Configure -Accflags=-DPERLIOBUF_DEFAULT_BUFSIZ=N where N is the desired size in bytes; it should probably be a multiple of your page size. =item * An "incompatible operand types" error in ternary expressions when building with C<clang> has been fixed (5.12.2). =item * Perl now skips setuid L<File::Copy> tests on partitions it detects mounted as C<nosuid> (5.12.2). =back =head1 Platform Support =head2 New Platforms =over 4 =item AIX Perl now builds on AIX 4.2 (5.12.1). =back =head2 Discontinued Platforms =over 4 =item Apollo DomainOS The last vestiges of support for this platform have been excised from the Perl distribution. It was officially discontinued in version 5.12.0. It had not worked for years before that. =item MacOS Classic The last vestiges of support for this platform have been excised from the Perl distribution. It was officially discontinued in an earlier version. =back =head2 Platform-Specific Notes =head3 AIX =over =item * F<README.aix> has been updated with information about the XL C/C++ V11 compiler suite (5.12.2). =back =head3 ARM =over =item * The C<d_u32align> configuration probe on ARM has been fixed (5.12.2). =back =head3 Cygwin =over 4 =item * L<MakeMaker> has been updated to build manpages on cygwin. =item * Improved rebase behaviour If a DLL is updated on cygwin the old imagebase address is reused. This solves most rebase errors, especially when updating on core DLL's. See L<http://www.tishler.net/jason/software/rebase/rebase-2.4.2.README> for more information. =item * Support for the standard cygwin dll prefix (needed for FFIs) =item * Updated build hints file =back =head3 FreeBSD 7 =over =item * FreeBSD 7 no longer contains F</usr/bin/objformat>. At build time, Perl now skips the F<objformat> check for versions 7 and higher and assumes ELF (5.12.1). =back =head3 HP-UX =over =item * Perl now allows B<-Duse64bitint> without promoting to C<use64bitall> on HP-UX (5.12.1). =back =head3 IRIX =over =item * Conversion of strings to floating-point numbers is now more accurate on IRIX systems [perl #32380]. =back =head3 Mac OS X =over =item * Early versions of Mac OS X (Darwin) had buggy implementations of the setregid(), setreuid(), setrgid(,) and setruid() functions, so Perl would pretend they did not exist. These functions are now recognised on Mac OS 10.5 (Leopard; Darwin 9) and higher, as they have been fixed [perl #72990]. =back =head3 MirBSD =over =item * Previously if you built Perl with a shared F<libperl.so> on MirBSD (the default config), it would work up to the installation; however, once installed, it would be unable to find F<libperl>. Path handling is now treated as in the other BSD dialects. =back =head3 NetBSD =over =item * The NetBSD hints file has been changed to make the system malloc the default. =back =head3 OpenBSD =over =item * OpenBSD E<gt> 3.7 has a new malloc implementation which is I<mmap>-based, and as such can release memory back to the OS; however, Perl's use of this malloc causes a substantial slowdown, so we now default to using Perl's malloc instead [perl #75742]. =back =head3 OpenVOS =over =item * Perl now builds again with OpenVOS (formerly known as Stratus VOS) [perl #78132] (5.12.3). =back =head3 Solaris =over =item * DTrace is now supported on Solaris. There used to be build failures, but these have been fixed [perl #73630] (5.12.3). =back =head3 VMS =over =item * Extension building on older (pre 7.3-2) VMS systems was broken because configure.com hit the DCL symbol length limit of 1K. We now work within this limit when assembling the list of extensions in the core build (5.12.1). =item * We fixed configuring and building Perl with B<-Uuseperlio> (5.12.1). =item * C<PerlIOUnix_open> now honours the default permissions on VMS. When C<perlio> became the default and C<unix> became the default bottom layer, the most common path for creating files from Perl became C<PerlIOUnix_open>, which has always explicitly used C<0666> as the permission mask. This prevents inheriting permissions from RMS defaults and ACLs, so to avoid that problem, we now pass C<0777> to open(). In the VMS CRTL, C<0777> has a special meaning over and above intersecting with the current umask; specifically, it allows Unix syscalls to preserve native default permissions (5.12.3). =item * The shortening of symbols longer than 31 characters in the core C sources and in extensions is now by default done by the C compiler rather than by xsubpp (which could only do so for generated symbols in XS code). You can reenable xsubpp's symbol shortening by configuring with -Uuseshortenedsymbols, but you'll have some work to do to get the core sources to compile. =item * Record-oriented files (record format variable or variable with fixed control) opened for write by the C<perlio> layer will now be line-buffered to prevent the introduction of spurious line breaks whenever the perlio buffer fills up. =item * F<git_version.h> is now installed on VMS. This was an oversight in v5.12.0 which caused some extensions to fail to build (5.12.2). =item * Several memory leaks in L<stat()|perlfunc/"stat FILEHANDLE"> have been fixed (5.12.2). =item * A memory leak in Perl_rename() due to a double allocation has been fixed (5.12.2). =item * A memory leak in vms_fid_to_name() (used by realpath() and realname()> has been fixed (5.12.2). =back =head3 Windows See also L</"fork() emulation will not wait for signalled children"> and L</"Perl source code is read in text mode on Windows">, above. =over 4 =item * Fixed build process for SDK2003SP1 compilers. =item * Compilation with Visual Studio 2010 is now supported. =item * When using old 32-bit compilers, the define C<_USE_32BIT_TIME_T> is now set in C<$Config{ccflags}>. This improves portability when compiling XS extensions using new compilers, but for a Perl compiled with old 32-bit compilers. =item * C<$Config{gccversion}> is now set correctly when Perl is built using the mingw64 compiler from L<http://mingw64.org> [perl #73754]. =item * When building Perl with the mingw64 x64 cross-compiler C<incpath>, C<libpth>, C<ldflags>, C<lddlflags> and C<ldflags_nolargefiles> values in F<Config.pm> and F<Config_heavy.pl> were not previously being set correctly because, with that compiler, the include and lib directories are not immediately below C<$(CCHOME)> (5.12.2). =item * The build process proceeds more smoothly with mingw and dmake when F<C:\MSYS\bin> is in the PATH, due to a C<Cwd> fix. =item * Support for building with Visual C++ 2010 is now underway, but is not yet complete. See F<README.win32> or L<perlwin32> for more details. =item * The option to use an externally-supplied crypt(), or to build with no crypt() at all, has been removed. Perl supplies its own crypt() implementation for Windows, and the political situation that required this part of the distribution to sometimes be omitted is long gone. =back =head1 Internal Changes =head2 New APIs =head3 CLONE_PARAMS structure added to ease correct thread creation Modules that create threads should now create C<CLONE_PARAMS> structures by calling the new function Perl_clone_params_new(), and free them with Perl_clone_params_del(). This will ensure compatibility with any future changes to the internals of the C<CLONE_PARAMS> structure layout, and that it is correctly allocated and initialised. =head3 New parsing functions Several functions have been added for parsing Perl statements and expressions. These functions are meant to be used by XS code invoked during Perl parsing, in a recursive-descent manner, to allow modules to augment the standard Perl syntax. =over =item * L<parse_stmtseq()|perlapi/parse_stmtseq> parses a sequence of statements, up to closing brace or EOF. =item * L<parse_fullstmt()|perlapi/parse_fullstmt> parses a complete Perl statement, including optional label. =item * L<parse_barestmt()|perlapi/parse_barestmt> parses a statement without a label. =item * L<parse_block()|perlapi/parse_block> parses a code block. =item * L<parse_label()|perlapi/parse_label> parses a statement label, separate from statements. =item * L<C<parse_fullexpr()>|perlapi/parse_fullexpr>, L<C<parse_listexpr()>|perlapi/parse_listexpr>, L<C<parse_termexpr()>|perlapi/parse_termexpr>, and L<C<parse_arithexpr()>|perlapi/parse_arithexpr> parse expressions at various precedence levels. =back =head3 Hints hash API A new C API for introspecting the hinthash C<%^H> at runtime has been added. See C<cop_hints_2hv>, C<cop_hints_fetchpvn>, C<cop_hints_fetchpvs>, C<cop_hints_fetchsv>, and C<hv_copy_hints_hv> in L<perlapi> for details. A new, experimental API has been added for accessing the internal structure that Perl uses for C<%^H>. See the functions beginning with C<cophh_> in L<perlapi>. =head3 C interface to caller() The C<caller_cx> function has been added as an XSUB-writer's equivalent of caller(). See L<perlapi> for details. =head3 Custom per-subroutine check hooks XS code in an extension module can now annotate a subroutine (whether implemented in XS or in Perl) so that nominated XS code will be called at compile time (specifically as part of op checking) to change the op tree of that subroutine. The compile-time check function (supplied by the extension module) can implement argument processing that can't be expressed as a prototype, generate customised compile-time warnings, perform constant folding for a pure function, inline a subroutine consisting of sufficiently simple ops, replace the whole call with a custom op, and so on. This was previously all possible by hooking the C<entersub> op checker, but the new mechanism makes it easy to tie the hook to a specific subroutine. See L<perlapi/cv_set_call_checker>. To help in writing custom check hooks, several subtasks within standard C<entersub> op checking have been separated out and exposed in the API. =head3 Improved support for custom OPs Custom ops can now be registered with the new C<custom_op_register> C function and the C<XOP> structure. This will make it easier to add new properties of custom ops in the future. Two new properties have been added already, C<xop_class> and C<xop_peep>. C<xop_class> is one of the OA_*OP constants. It allows L<B> and other introspection mechanisms to work with custom ops that aren't BASEOPs. C<xop_peep> is a pointer to a function that will be called for ops of this type from C<Perl_rpeep>. See L<perlguts/Custom Operators> and L<perlapi/Custom Operators> for more detail. The old C<PL_custom_op_names>/C<PL_custom_op_descs> interface is still supported but discouraged. =head3 Scope hooks It is now possible for XS code to hook into Perl's lexical scope mechanism at compile time, using the new C<Perl_blockhook_register> function. See L<perlguts/"Compile-time scope hooks">. =head3 The recursive part of the peephole optimizer is now hookable In addition to C<PL_peepp>, for hooking into the toplevel peephole optimizer, a C<PL_rpeepp> is now available to hook into the optimizer recursing into side-chains of the optree. =head3 New non-magical variants of existing functions The following functions/macros have been added to the API. The C<*_nomg> macros are equivalent to their non-C<_nomg> variants, except that they ignore get-magic. Those ending in C<_flags> allow one to specify whether get-magic is processed. sv_2bool_flags SvTRUE_nomg sv_2nv_flags SvNV_nomg sv_cmp_flags sv_cmp_locale_flags sv_eq_flags sv_collxfrm_flags In some of these cases, the non-C<_flags> functions have been replaced with wrappers around the new functions. =head3 pv/pvs/sv versions of existing functions Many functions ending with pvn now have equivalent C<pv/pvs/sv> versions. =head3 List op-building functions List op-building functions have been added to the API. See L<op_append_elem|perlapi/op_append_elem>, L<op_append_list|perlapi/op_append_list>, and L<op_prepend_elem|perlapi/op_prepend_elem> in L<perlapi>. =head3 C<LINKLIST> The L<LINKLIST|perlapi/LINKLIST> macro, part of op building that constructs the execution-order op chain, has been added to the API. =head3 Localisation functions The C<save_freeop>, C<save_op>, C<save_pushi32ptr> and C<save_pushptrptr> functions have been added to the API. =head3 Stash names A stash can now have a list of effective names in addition to its usual name. The first effective name can be accessed via the C<HvENAME> macro, which is now the recommended name to use in MRO linearisations (C<HvNAME> being a fallback if there is no C<HvENAME>). These names are added and deleted via C<hv_ename_add> and C<hv_ename_delete>. These two functions are I<not> part of the API. =head3 New functions for finding and removing magic The L<C<mg_findext()>|perlapi/mg_findext> and L<C<sv_unmagicext()>|perlapi/sv_unmagicext> functions have been added to the API. They allow extension authors to find and remove magic attached to scalars based on both the magic type and the magic virtual table, similar to how sv_magicext() attaches magic of a certain type and with a given virtual table to a scalar. This eliminates the need for extensions to walk the list of C<MAGIC> pointers of an C<SV> to find the magic that belongs to them. =head3 C<find_rundefsv> This function returns the SV representing C<$_>, whether it's lexical or dynamic. =head3 C<Perl_croak_no_modify> Perl_croak_no_modify() is short-hand for C<Perl_croak("%s", PL_no_modify)>. =head3 C<PERL_STATIC_INLINE> define The C<PERL_STATIC_INLINE> define has been added to provide the best-guess incantation to use for static inline functions, if the C compiler supports C99-style static inline. If it doesn't, it'll give a plain C<static>. C<HAS_STATIC_INLINE> can be used to check if the compiler actually supports inline functions. =head3 New C<pv_escape> option for hexadecimal escapes A new option, C<PERL_PV_ESCAPE_NONASCII>, has been added to C<pv_escape> to dump all characters above ASCII in hexadecimal. Before, one could get all characters as hexadecimal or the Latin1 non-ASCII as octal. =head3 C<lex_start> C<lex_start> has been added to the API, but is considered experimental. =head3 op_scope() and op_lvalue() The op_scope() and op_lvalue() functions have been added to the API, but are considered experimental. =head2 C API Changes =head3 C<PERL_POLLUTE> has been removed The option to define C<PERL_POLLUTE> to expose older 5.005 symbols for backwards compatibility has been removed. Its use was always discouraged, and MakeMaker contains a more specific escape hatch: perl Makefile.PL POLLUTE=1 This can be used for modules that have not been upgraded to 5.6 naming conventions (and really should be completely obsolete by now). =head3 Check API compatibility when loading XS modules When Perl's API changes in incompatible ways (which usually happens between major releases), XS modules compiled for previous versions of Perl will no longer work. They need to be recompiled against the new Perl. The C<XS_APIVERSION_BOOTCHECK> macro has been added to ensure that modules are recompiled and to prevent users from accidentally loading modules compiled for old perls into newer perls. That macro, which is called when loading every newly compiled extension, compares the API version of the running perl with the version a module has been compiled for and raises an exception if they don't match. =head3 Perl_fetch_cop_label The first argument of the C API function C<Perl_fetch_cop_label> has changed from C<struct refcounted_he *> to C<COP *>, to insulate the user from implementation details. This API function was marked as "may change", and likely isn't in use outside the core. (Neither an unpacked CPAN nor Google's codesearch finds any other references to it.) =head3 GvCV() and GvGP() are no longer lvalues The new GvCV_set() and GvGP_set() macros are now provided to replace assignment to those two macros. This allows a future commit to eliminate some backref magic between GV and CVs, which will require complete control over assignment to the C<gp_cv> slot. =head3 CvGV() is no longer an lvalue Under some circumstances, the CvGV() field of a CV is now reference-counted. To ensure consistent behaviour, direct assignment to it, for example C<CvGV(cv) = gv> is now a compile-time error. A new macro, C<CvGV_set(cv,gv)> has been introduced to run this operation safely. Note that modification of this field is not part of the public API, regardless of this new macro (and despite its being listed in this section). =head3 CvSTASH() is no longer an lvalue The CvSTASH() macro can now only be used as an rvalue. CvSTASH_set() has been added to replace assignment to CvSTASH(). This is to ensure that backreferences are handled properly. These macros are not part of the API. =head3 Calling conventions for C<newFOROP> and C<newWHILEOP> The way the parser handles labels has been cleaned up and refactored. As a result, the newFOROP() constructor function no longer takes a parameter stating what label is to go in the state op. The newWHILEOP() and newFOROP() functions no longer accept a line number as a parameter. =head3 Flags passed to C<uvuni_to_utf8_flags> and C<utf8n_to_uvuni> Some of the flags parameters to uvuni_to_utf8_flags() and utf8n_to_uvuni() have changed. This is a result of Perl's now allowing internal storage and manipulation of code points that are problematic in some situations. Hence, the default actions for these functions has been complemented to allow these code points. The new flags are documented in L<perlapi>. Code that requires the problematic code points to be rejected needs to change to use the new flags. Some flag names are retained for backward source compatibility, though they do nothing, as they are now the default. However the flags C<UNICODE_ALLOW_FDD0>, C<UNICODE_ALLOW_FFFF>, C<UNICODE_ILLEGAL>, and C<UNICODE_IS_ILLEGAL> have been removed, as they stem from a fundamentally broken model of how the Unicode non-character code points should be handled, which is now described in L<perlunicode/Non-character code points>. See also the Unicode section under L</Selected Bug Fixes>. =head2 Deprecated C APIs =over =item C<Perl_ptr_table_clear> C<Perl_ptr_table_clear> is no longer part of Perl's public API. Calling it now generates a deprecation warning, and it will be removed in a future release. =item C<sv_compile_2op> The sv_compile_2op() API function is now deprecated. Searches suggest that nothing on CPAN is using it, so this should have zero impact. It attempted to provide an API to compile code down to an optree, but failed to bind correctly to lexicals in the enclosing scope. It's not possible to fix this problem within the constraints of its parameters and return value. =item C<find_rundefsvoffset> The C<find_rundefsvoffset> function has been deprecated. It appeared that its design was insufficient for reliably getting the lexical C<$_> at run-time. Use the new C<find_rundefsv> function or the C<UNDERBAR> macro instead. They directly return the right SV representing C<$_>, whether it's lexical or dynamic. =item C<CALL_FPTR> and C<CPERLscope> Those are left from an old implementation of C<MULTIPLICITY> using C++ objects, which was removed in Perl 5.8. Nowadays these macros do exactly nothing, so they shouldn't be used anymore. For compatibility, they are still defined for external C<XS> code. Only extensions defining C<PERL_CORE> must be updated now. =back =head2 Other Internal Changes =head3 Stack unwinding The protocol for unwinding the C stack at the last stage of a C<die> has changed how it identifies the target stack frame. This now uses a separate variable C<PL_restartjmpenv>, where previously it relied on the C<blk_eval.cur_top_env> pointer in the C<eval> context frame that has nominally just been discarded. This change means that code running during various stages of Perl-level unwinding no longer needs to take care to avoid destroying the ghost frame. =head3 Scope stack entries The format of entries on the scope stack has been changed, resulting in a reduction of memory usage of about 10%. In particular, the memory used by the scope stack to record each active lexical variable has been halved. =head3 Memory allocation for pointer tables Memory allocation for pointer tables has been changed. Previously C<Perl_ptr_table_store> allocated memory from the same arena system as C<SV> bodies and C<HE>s, with freed memory remaining bound to those arenas until interpreter exit. Now it allocates memory from arenas private to the specific pointer table, and that memory is returned to the system when C<Perl_ptr_table_free> is called. Additionally, allocation and release are both less CPU intensive. =head3 C<UNDERBAR> The C<UNDERBAR> macro now calls C<find_rundefsv>. C<dUNDERBAR> is now a noop but should still be used to ensure past and future compatibility. =head3 String comparison routines renamed The C<ibcmp_*> functions have been renamed and are now called C<foldEQ>, C<foldEQ_locale>, and C<foldEQ_utf8>. The old names are still available as macros. =head3 C<chop> and C<chomp> implementations merged The opcode bodies for C<chop> and C<chomp> and for C<schop> and C<schomp> have been merged. The implementation functions Perl_do_chop() and Perl_do_chomp(), never part of the public API, have been merged and moved to a static function in F<pp.c>. This shrinks the Perl binary slightly, and should not affect any code outside the core (unless it is relying on the order of side-effects when C<chomp> is passed a I<list> of values). =head1 Selected Bug Fixes =head2 I/O =over 4 =item * Perl no longer produces this warning: $ perl -we 'open(my $f, ">", \my $x); binmode($f, "scalar")' Use of uninitialized value in binmode at -e line 1. =item * Opening a glob reference via C<< open($fh, ">", \*glob) >> no longer causes the glob to be corrupted when the filehandle is printed to. This would cause Perl to crash whenever the glob's contents were accessed [perl #77492]. =item * PerlIO no longer crashes when called recursively, such as from a signal handler. Now it just leaks memory [perl #75556]. =item * Most I/O functions were not warning for unopened handles unless the "closed" and "unopened" warnings categories were both enabled. Now only C<use warnings 'unopened'> is necessary to trigger these warnings, as had always been the intention. =item * There have been several fixes to PerlIO layers: When C<binmode(FH, ":crlf")> pushes the C<:crlf> layer on top of the stack, it no longer enables crlf layers lower in the stack so as to avoid unexpected results [perl #38456]. Opening a file in C<:raw> mode now does what it advertises to do (first open the file, then C<binmode> it), instead of simply leaving off the top layer [perl #80764]. The three layers C<:pop>, C<:utf8>, and C<:bytes> didn't allow stacking when opening a file. For example this: open(FH, ">:pop:perlio", "some.file") or die $!; would throw an "Invalid argument" error. This has been fixed in this release [perl #82484]. =back =head2 Regular Expression Bug Fixes =over =item * The regular expression engine no longer loops when matching C<"\N{LATIN SMALL LIGATURE FF}" =~ /f+/i> and similar expressions [perl #72998] (5.12.1). =item * The trie runtime code should no longer allocate massive amounts of memory, fixing #74484. =item * Syntax errors in C<< (?{...}) >> blocks no longer cause panic messages [perl #2353]. =item * A pattern like C<(?:(o){2})?> no longer causes a "panic" error [perl #39233]. =item * A fatal error in regular expressions containing C<(.*?)> when processing UTF-8 data has been fixed [perl #75680] (5.12.2). =item * An erroneous regular expression engine optimisation that caused regex verbs like C<*COMMIT> sometimes to be ignored has been removed. =item * The regular expression bracketed character class C<[\8\9]> was effectively the same as C<[89\000]>, incorrectly matching a NULL character. It also gave incorrect warnings that the C<8> and C<9> were ignored. Now C<[\8\9]> is the same as C<[89]> and gives legitimate warnings that C<\8> and C<\9> are unrecognized escape sequences, passed-through. =item * A regular expression match in the right-hand side of a global substitution (C<s///g>) that is in the same scope will no longer cause match variables to have the wrong values on subsequent iterations. This can happen when an array or hash subscript is interpolated in the right-hand side, as in C<s|(.)|@a{ print($1), /./ }|g> [perl #19078]. =item * Several cases in which characters in the Latin-1 non-ASCII range (0x80 to 0xFF) used not to match themselves, or used to match both a character class and its complement, have been fixed. For instance, U+00E2 could match both C<\w> and C<\W> [perl #78464] [perl #18281] [perl #60156]. =item * Matching a Unicode character against an alternation containing characters that happened to match continuation bytes in the former's UTF8 representation (like C<qq{\x{30ab}} =~ /\xab|\xa9/>) would cause erroneous warnings [perl #70998]. =item * The trie optimisation was not taking empty groups into account, preventing "foo" from matching C</\A(?:(?:)foo|bar|zot)\z/> [perl #78356]. =item * A pattern containing a C<+> inside a lookahead would sometimes cause an incorrect match failure in a global match (for example, C</(?=(\S+))/g>) [perl #68564]. =item * A regular expression optimisation would sometimes cause a match with a C<{n,m}> quantifier to fail when it should have matched [perl #79152]. =item * Case-insensitive matching in regular expressions compiled under C<use locale> now works much more sanely when the pattern or target string is internally encoded in UTF8. Previously, under these conditions the localeness was completely lost. Now, code points above 255 are treated as Unicode, but code points between 0 and 255 are treated using the current locale rules, regardless of whether the pattern or the string is encoded in UTF8. The few case-insensitive matches that cross the 255/256 boundary are not allowed. For example, 0xFF does not caselessly match the character at 0x178, LATIN CAPITAL LETTER Y WITH DIAERESIS, because 0xFF may not be LATIN SMALL LETTER Y in the current locale, and Perl has no way of knowing if that character even exists in the locale, much less what code point it is. =item * The C<(?|...)> regular expression construct no longer crashes if the final branch has more sets of capturing parentheses than any other branch. This was fixed in Perl 5.10.1 for the case of a single branch, but that fix did not take multiple branches into account [perl #84746]. =item * A bug has been fixed in the implementation of C<{...}> quantifiers in regular expressions that prevented the code block in C</((\w+)(?{ print $2 })){2}/> from seeing the C<$2> sometimes [perl #84294]. =back =head2 Syntax/Parsing Bugs =over =item * C<when (scalar) {...}> no longer crashes, but produces a syntax error [perl #74114] (5.12.1). =item * A label right before a string eval (C<foo: eval $string>) no longer causes the label to be associated also with the first statement inside the eval [perl #74290] (5.12.1). =item * The C<no 5.13.2> form of C<no> no longer tries to turn on features or pragmata (like L<strict>) [perl #70075] (5.12.2). =item * C<BEGIN {require 5.12.0}> now behaves as documented, rather than behaving identically to C<use 5.12.0>. Previously, C<require> in a C<BEGIN> block was erroneously executing the C<use feature ':5.12.0'> and C<use strict> behaviour, which only C<use> was documented to provide [perl #69050]. =item * A regression introduced in Perl 5.12.0, making C<< my $x = 3; $x = length(undef) >> result in C<$x> set to C<3> has been fixed. C<$x> will now be C<undef> [perl #85508] (5.12.2). =item * When strict "refs" mode is off, C<%{...}> in rvalue context returns C<undef> if its argument is undefined. An optimisation introduced in Perl 5.12.0 to make C<keys %{...}> faster when used as a boolean did not take this into account, causing C<keys %{+undef}> (and C<keys %$foo> when C<$foo> is undefined) to be an error, which it should be so in strict mode only [perl #81750]. =item * Constant-folding used to cause $text =~ ( 1 ? /phoo/ : /bear/) to turn into $text =~ /phoo/ at compile time. Now it correctly matches against C<$_> [perl #20444]. =item * Parsing Perl code (either with string C<eval> or by loading modules) from within a C<UNITCHECK> block no longer causes the interpreter to crash [perl #70614]. =item * String C<eval>s no longer fail after 2 billion scopes have been compiled [perl #83364]. =item * The parser no longer hangs when encountering certain Unicode characters, such as U+387 [perl #74022]. =item * Defining a constant with the same name as one of Perl's special blocks (like C<INIT>) stopped working in 5.12.0, but has now been fixed [perl #78634]. =item * A reference to a literal value used as a hash key (C<$hash{\"foo"}>) used to be stringified, even if the hash was tied [perl #79178]. =item * A closure containing an C<if> statement followed by a constant or variable is no longer treated as a constant [perl #63540]. =item * C<state> can now be used with attributes. It used to mean the same thing as C<my> if any attributes were present [perl #68658]. =item * Expressions like C<< @$a > 3 >> no longer cause C<$a> to be mentioned in the "Use of uninitialized value in numeric gt" warning when C<$a> is undefined (since it is not part of the C<< > >> expression, but the operand of the C<@>) [perl #72090]. =item * Accessing an element of a package array with a hard-coded number (as opposed to an arbitrary expression) would crash if the array did not exist. Usually the array would be autovivified during compilation, but typeglob manipulation could remove it, as in these two cases which used to crash: *d = *a; print $d[0]; undef *d; print $d[0]; =item * The B<-C> command-line option, when used on the shebang line, can now be followed by other options [perl #72434]. =item * The C<B> module was returning C<B::OP>s instead of C<B::LOGOP>s for C<entertry> [perl #80622]. This was due to a bug in the Perl core, not in C<B> itself. =back =head2 Stashes, Globs and Method Lookup Perl 5.10.0 introduced a new internal mechanism for caching MROs (method resolution orders, or lists of parent classes; aka "isa" caches) to make method lookup faster (so C<@ISA> arrays would not have to be searched repeatedly). Unfortunately, this brought with it quite a few bugs. Almost all of these have been fixed now, along with a few MRO-related bugs that existed before 5.10.0: =over =item * The following used to have erratic effects on method resolution, because the "isa" caches were not reset or otherwise ended up listing the wrong classes. These have been fixed. =over =item Aliasing packages by assigning to globs [perl #77358] =item Deleting packages by deleting their containing stash elements =item Undefining the glob containing a package (C<undef *Foo::>) =item Undefining an ISA glob (C<undef *Foo::ISA>) =item Deleting an ISA stash element (C<delete $Foo::{ISA}>) =item Sharing @ISA arrays between classes (via C<*Foo::ISA = \@Bar::ISA> or C<*Foo::ISA = *Bar::ISA>) [perl #77238] =back C<undef *Foo::ISA> would even stop a new C<@Foo::ISA> array from updating caches. =item * Typeglob assignments would crash if the glob's stash no longer existed, so long as the glob assigned to were named C<ISA> or the glob on either side of the assignment contained a subroutine. =item * C<PL_isarev>, which is accessible to Perl via C<mro::get_isarev> is now updated properly when packages are deleted or removed from the C<@ISA> of other classes. This allows many packages to be created and deleted without causing a memory leak [perl #75176]. =back In addition, various other bugs related to typeglobs and stashes have been fixed: =over =item * Some work has been done on the internal pointers that link between symbol tables (stashes), typeglobs, and subroutines. This has the effect that various edge cases related to deleting stashes or stash entries (for example, <%FOO:: = ()>), and complex typeglob or code-reference aliasing, will no longer crash the interpreter. =item * Assigning a reference to a glob copy now assigns to a glob slot instead of overwriting the glob with a scalar [perl #1804] [perl #77508]. =item * A bug when replacing the glob of a loop variable within the loop has been fixed [perl #21469]. This means the following code will no longer crash: for $x (...) { *x = *y; } =item * Assigning a glob to a PVLV used to convert it to a plain string. Now it works correctly, and a PVLV can hold a glob. This would happen when a nonexistent hash or array element was passed to a subroutine: sub { $_[0] = *foo }->($hash{key}); # $_[0] would have been the string "*main::foo" It also happened when a glob was assigned to, or returned from, an element of a tied array or hash [perl #36051]. =item * When trying to report C<Use of uninitialized value $Foo::BAR>, crashes could occur if the glob holding the global variable in question had been detached from its original stash by, for example, C<delete $::{"Foo::"}>. This has been fixed by disabling the reporting of variable names in those cases. =item * During the restoration of a localised typeglob on scope exit, any destructors called as a result would be able to see the typeglob in an inconsistent state, containing freed entries, which could result in a crash. This would affect code like this: local *@; eval { die bless [] }; # puts an object in $@ sub DESTROY { local $@; # boom } Now the glob entries are cleared before any destructors are called. This also means that destructors can vivify entries in the glob. So Perl tries again and, if the entries are re-created too many times, dies with a "panic: gp_free ..." error message. =item * If a typeglob is freed while a subroutine attached to it is still referenced elsewhere, the subroutine is renamed to C<__ANON__> in the same package, unless the package has been undefined, in which case the C<__ANON__> package is used. This could cause packages to be sometimes autovivified, such as if the package had been deleted. Now this no longer occurs. The C<__ANON__> package is also now used when the original package is no longer attached to the symbol table. This avoids memory leaks in some cases [perl #87664]. =item * Subroutines and package variables inside a package whose name ends with C<::> can now be accessed with a fully qualified name. =back =head2 Unicode =over =item * What has become known as "the Unicode Bug" is almost completely resolved in this release. Under C<use feature 'unicode_strings'> (which is automatically selected by C<use 5.012> and above), the internal storage format of a string no longer affects the external semantics. [perl #58182]. There are two known exceptions: =over =item 1 The now-deprecated, user-defined case-changing functions require utf8-encoded strings to operate. The CPAN module L<Unicode::Casing> has been written to replace this feature without its drawbacks, and the feature is scheduled to be removed in 5.16. =item 2 quotemeta() (and its in-line equivalent C<\Q>) can also give different results depending on whether a string is encoded in UTF-8. See L<perlunicode/The "Unicode Bug">. =back =item * Handling of Unicode non-character code points has changed. Previously they were mostly considered illegal, except that in some place only one of the 66 of them was known. The Unicode Standard considers them all legal, but forbids their "open interchange". This is part of the change to allow internal use of any code point (see L</Core Enhancements>). Together, these changes resolve [perl #38722], [perl #51918], [perl #51936], and [perl #63446]. =item * Case-insensitive C<"/i"> regular expression matching of Unicode characters that match multiple characters now works much more as intended. For example "\N{LATIN SMALL LIGATURE FFI}" =~ /ffi/ui and "ffi" =~ /\N{LATIN SMALL LIGATURE FFI}/ui are both true. Previously, there were many bugs with this feature. What hasn't been fixed are the places where the pattern contains the multiple characters, but the characters are split up by other things, such as in "\N{LATIN SMALL LIGATURE FFI}" =~ /(f)(f)i/ui or "\N{LATIN SMALL LIGATURE FFI}" =~ /ffi*/ui or "\N{LATIN SMALL LIGATURE FFI}" =~ /[a-f][f-m][g-z]/ui None of these match. Also, this matching doesn't fully conform to the current Unicode Standard, which asks that the matching be made upon the NFD (Normalization Form Decomposed) of the text. However, as of this writing (April 2010), the Unicode Standard is currently in flux about what they will recommend doing with regard in such scenarios. It may be that they will throw out the whole concept of multi-character matches. [perl #71736]. =item * Naming a deprecated character in C<\N{I<NAME>}> no longer leaks memory. =item * We fixed a bug that could cause C<\N{I<NAME>}> constructs followed by a single C<"."> to be parsed incorrectly [perl #74978] (5.12.1). =item * C<chop> now correctly handles characters above C<"\x{7fffffff}"> [perl #73246]. =item * Passing to C<index> an offset beyond the end of the string when the string is encoded internally in UTF8 no longer causes panics [perl #75898]. =item * warn() and die() now respect utf8-encoded scalars [perl #45549]. =item * Sometimes the UTF8 length cache would not be reset on a value returned by substr, causing C<length(substr($uni_string, ...))> to give wrong answers. With C<${^UTF8CACHE}> set to -1, it would also produce a "panic" error message [perl #77692]. =back =head2 Ties, Overloading and Other Magic =over =item * Overloading now works properly in conjunction with tied variables. What formerly happened was that most ops checked their arguments for overloading I<before> checking for magic, so for example an overloaded object returned by a tied array access would usually be treated as not overloaded [RT #57012]. =item * Various instances of magic (like tie methods) being called on tied variables too many or too few times have been fixed: =over =item * C<< $tied->() >> did not always call FETCH [perl #8438]. =item * Filetest operators and C<y///> and C<tr///> were calling FETCH too many times. =item * The C<=> operator used to ignore magic on its right-hand side if the scalar happened to hold a typeglob (if a typeglob was the last thing returned from or assigned to a tied scalar) [perl #77498]. =item * Dereference operators used to ignore magic if the argument was a reference already (such as from a previous FETCH) [perl #72144]. =item * C<splice> now calls set-magic (so changes made by C<splice @ISA> are respected by method calls) [perl #78400]. =item * In-memory files created by C<< open($fh, ">", \$buffer) >> were not calling FETCH/STORE at all [perl #43789] (5.12.2). =item * utf8::is_utf8() now respects get-magic (like C<$1>) (5.12.1). =back =item * Non-commutative binary operators used to swap their operands if the same tied scalar was used for both operands and returned a different value for each FETCH. For instance, if C<$t> returned 2 the first time and 3 the second, then C<$t/$t> would evaluate to 1.5. This has been fixed [perl #87708]. =item * String C<eval> now detects taintedness of overloaded or tied arguments [perl #75716]. =item * String C<eval> and regular expression matches against objects with string overloading no longer cause memory corruption or crashes [perl #77084]. =item * L<readline|perlfunc/"readline EXPR"> now honors C<< <> >> overloading on tied arguments. =item * C<< <expr> >> always respects overloading now if the expression is overloaded. Because "S<< <> as >> glob" was parsed differently from "S<< <> as >> filehandle" from 5.6 onwards, something like C<< <$foo[0]> >> did not handle overloading, even if C<$foo[0]> was an overloaded object. This was contrary to the documentation for L<overload>, and meant that C<< <> >> could not be used as a general overloaded iterator operator. =item * The fallback behaviour of overloading on binary operators was asymmetric [perl #71286]. =item * Magic applied to variables in the main package no longer affects other packages. See L</Magic variables outside the main package> above [perl #76138]. =item * Sometimes magic (ties, taintedness, etc.) attached to variables could cause an object to last longer than it should, or cause a crash if a tied variable were freed from within a tie method. These have been fixed [perl #81230]. =item * DESTROY methods of objects implementing ties are no longer able to crash by accessing the tied variable through a weak reference [perl #86328]. =item * Fixed a regression of kill() when a match variable is used for the process ID to kill [perl #75812]. =item * C<$AUTOLOAD> used to remain tainted forever if it ever became tainted. Now it is correctly untainted if an autoloaded method is called and the method name was not tainted. =item * C<sprintf> now dies when passed a tainted scalar for the format. It did already die for arbitrary expressions, but not for simple scalars [perl #82250]. =item * C<lc>, C<uc>, C<lcfirst>, and C<ucfirst> no longer return untainted strings when the argument is tainted. This has been broken since perl 5.8.9 [perl #87336]. =back =head2 The Debugger =over =item * The Perl debugger now also works in taint mode [perl #76872]. =item * Subroutine redefinition works once more in the debugger [perl #48332]. =item * When B<-d> is used on the shebang (C<#!>) line, the debugger now has access to the lines of the main program. In the past, this sometimes worked and sometimes did not, depending on the order in which things happened to be arranged in memory [perl #71806]. =item * A possible memory leak when using L<caller()|perlfunc/"caller EXPR"> to set C<@DB::args> has been fixed (5.12.2). =item * Perl no longer stomps on C<$DB::single>, C<$DB::trace>, and C<$DB::signal> if these variables already have values when C<$^P> is assigned to [perl #72422]. =item * C<#line> directives in string evals were not properly updating the arrays of lines of code (C<< @{"_< ..."} >>) that the debugger (or any debugging or profiling module) uses. In threaded builds, they were not being updated at all. In non-threaded builds, the line number was ignored, so any change to the existing line number would cause the lines to be misnumbered [perl #79442]. =back =head2 Threads =over =item * Perl no longer accidentally clones lexicals in scope within active stack frames in the parent when creating a child thread [perl #73086]. =item * Several memory leaks in cloning and freeing threaded Perl interpreters have been fixed [perl #77352]. =item * Creating a new thread when directory handles were open used to cause a crash, because the handles were not cloned, but simply passed to the new thread, resulting in a double free. Now directory handles are cloned properly on Windows and on systems that have a C<fchdir> function. On other systems, new threads simply do not inherit directory handles from their parent threads [perl #75154]. =item * The typeglob C<*,>, which holds the scalar variable C<$,> (output field separator), had the wrong reference count in child threads. =item * [perl #78494] When pipes are shared between threads, the C<close> function (and any implicit close, such as on thread exit) no longer blocks. =item * Perl now does a timely cleanup of SVs that are cloned into a new thread but then discovered to be orphaned (that is, their owners are I<not> cloned). This eliminates several "scalars leaked" warnings when joining threads. =back =head2 Scoping and Subroutines =over =item * Lvalue subroutines are again able to return copy-on-write scalars. This had been broken since version 5.10.0 [perl #75656] (5.12.3). =item * C<require> no longer causes C<caller> to return the wrong file name for the scope that called C<require> and other scopes higher up that had the same file name [perl #68712]. =item * C<sort> with a C<($$)>-prototyped comparison routine used to cause the value of C<@_> to leak out of the sort. Taking a reference to C<@_> within the sorting routine could cause a crash [perl #72334]. =item * Match variables (like C<$1>) no longer persist between calls to a sort subroutine [perl #76026]. =item * Iterating with C<foreach> over an array returned by an lvalue sub now works [perl #23790]. =item * C<$@> is now localised during calls to C<binmode> to prevent action at a distance [perl #78844]. =item * Calling a closure prototype (what is passed to an attribute handler for a closure) now results in a "Closure prototype called" error message instead of a crash [perl #68560]. =item * Mentioning a read-only lexical variable from the enclosing scope in a string C<eval> no longer causes the variable to become writable [perl #19135]. =back =head2 Signals =over =item * Within signal handlers, C<$!> is now implicitly localized. =item * CHLD signals are no longer unblocked after a signal handler is called if they were blocked before by C<POSIX::sigprocmask> [perl #82040]. =item * A signal handler called within a signal handler could cause leaks or double-frees. Now fixed [perl #76248]. =back =head2 Miscellaneous Memory Leaks =over =item * Several memory leaks when loading XS modules were fixed (5.12.2). =item * L<substr()|perlfunc/"substr EXPR,OFFSET,LENGTH,REPLACEMENT">, L<pos()|perlfunc/"index STR,SUBSTR,POSITION">, L<keys()|perlfunc/"keys HASH">, and L<vec()|perlfunc/"vec EXPR,OFFSET,BITS"> could, when used in combination with lvalues, result in leaking the scalar value they operate on, and cause its destruction to happen too late. This has now been fixed. =item * The postincrement and postdecrement operators, C<++> and C<-->, used to cause leaks when used on references. This has now been fixed. =item * Nested C<map> and C<grep> blocks no longer leak memory when processing large lists [perl #48004]. =item * C<use I<VERSION>> and C<no I<VERSION>> no longer leak memory [perl #78436] [perl #69050]. =item * C<.=> followed by C<< <> >> or C<readline> would leak memory if C<$/> contained characters beyond the octet range and the scalar assigned to happened to be encoded as UTF8 internally [perl #72246]. =item * C<eval 'BEGIN{die}'> no longer leaks memory on non-threaded builds. =back =head2 Memory Corruption and Crashes =over =item * glob() no longer crashes when C<%File::Glob::> is empty and C<CORE::GLOBAL::glob> isn't present [perl #75464] (5.12.2). =item * readline() has been fixed when interrupted by signals so it no longer returns the "same thing" as before or random memory. =item * When assigning a list with duplicated keys to a hash, the assignment used to return garbage and/or freed values: @a = %h = (list with some duplicate keys); This has now been fixed [perl #31865]. =item * The mechanism for freeing objects in globs used to leave dangling pointers to freed SVs, meaning Perl users could see corrupted state during destruction. Perl now frees only the affected slots of the GV, rather than freeing the GV itself. This makes sure that there are no dangling refs or corrupted state during destruction. =item * The interpreter no longer crashes when freeing deeply-nested arrays of arrays. Hashes have not been fixed yet [perl #44225]. =item * Concatenating long strings under C<use encoding> no longer causes Perl to crash [perl #78674]. =item * Calling C<< ->import >> on a class lacking an import method could corrupt the stack, resulting in strange behaviour. For instance, push @a, "foo", $b = bar->import; would assign "foo" to C<$b> [perl #63790]. =item * The C<recv> function could crash when called with the MSG_TRUNC flag [perl #75082]. =item * C<formline> no longer crashes when passed a tainted format picture. It also taints C<$^A> now if its arguments are tainted [perl #79138]. =item * A bug in how we process filetest operations could cause a segfault. Filetests don't always expect an op on the stack, so we now use TOPs only if we're sure that we're not C<stat>ing the C<_> filehandle. This is indicated by C<OPf_KIDS> (as checked in ck_ftst) [perl #74542] (5.12.1). =item * unpack() now handles scalar context correctly for C<%32H> and C<%32u>, fixing a potential crash. split() would crash because the third item on the stack wasn't the regular expression it expected. C<unpack("%2H", ...)> would return both the unpacked result and the checksum on the stack, as would C<unpack("%2u", ...)> [perl #73814] (5.12.2). =back =head2 Fixes to Various Perl Operators =over =item * The C<&>, C<|>, and C<^> bitwise operators no longer coerce read-only arguments [perl #20661]. =item * Stringifying a scalar containing "-0.0" no longer has the effect of turning false into true [perl #45133]. =item * Some numeric operators were converting integers to floating point, resulting in loss of precision on 64-bit platforms [perl #77456]. =item * sprintf() was ignoring locales when called with constant arguments [perl #78632]. =item * Combining the vector (C<%v>) flag and dynamic precision would cause C<sprintf> to confuse the order of its arguments, making it treat the string as the precision and vice-versa [perl #83194]. =back =head2 Bugs Relating to the C API =over =item * The C-level C<lex_stuff_pvn> function would sometimes cause a spurious syntax error on the last line of the file if it lacked a final semicolon [perl #74006] (5.12.1). =item * The C<eval_sv> and C<eval_pv> C functions now set C<$@> correctly when there is a syntax error and no C<G_KEEPERR> flag, and never set it if the C<G_KEEPERR> flag is present [perl #3719]. =item * The XS multicall API no longer causes subroutines to lose reference counts if called via the multicall interface from within those very subroutines. This affects modules like L<List::Util>. Calling one of its functions with an active subroutine as the first argument could cause a crash [perl #78070]. =item * The C<SvPVbyte> function available to XS modules now calls magic before downgrading the SV, to avoid warnings about wide characters [perl #72398]. =item * The ref types in the typemap for XS bindings now support magical variables [perl #72684]. =item * C<sv_catsv_flags> no longer calls C<mg_get> on its second argument (the source string) if the flags passed to it do not include SV_GMAGIC. So it now matches the documentation. =item * C<my_strftime> no longer leaks memory. This fixes a memory leak in C<POSIX::strftime> [perl #73520]. =item * F<XSUB.h> now correctly redefines fgets under PERL_IMPLICIT_SYS [perl #55049] (5.12.1). =item * XS code using fputc() or fputs() on Windows could cause an error due to their arguments being swapped [perl #72704] (5.12.1). =item * A possible segfault in the C<T_PTROBJ> default typemap has been fixed (5.12.2). =item * A bug that could cause "Unknown error" messages when C<call_sv(code, G_EVAL)> is called from an XS destructor has been fixed (5.12.2). =back =head1 Known Problems This is a list of significant unresolved issues which are regressions from earlier versions of Perl or which affect widely-used CPAN modules. =over 4 =item * C<List::Util::first> misbehaves in the presence of a lexical C<$_> (typically introduced by C<my $_> or implicitly by C<given>). The variable that gets set for each iteration is the package variable C<$_>, not the lexical C<$_>. A similar issue may occur in other modules that provide functions which take a block as their first argument, like foo { ... $_ ...} list See also: L<http://rt.perl.org/rt3/Public/Bug/Display.html?id=67694> =item * readline() returns an empty string instead of a cached previous value when it is interrupted by a signal =item * The changes in prototype handling break L<Switch>. A patch has been sent upstream and will hopefully appear on CPAN soon. =item * The upgrade to F<ExtUtils-MakeMaker-6.57_05> has caused some tests in the F<Module-Install> distribution on CPAN to fail. (Specifically, F<02_mymeta.t> tests 5 and 21; F<18_all_from.t> tests 6 and 15; F<19_authors.t> tests 5, 13, 21, and 29; and F<20_authors_with_special_characters.t> tests 6, 15, and 23 in version 1.00 of that distribution now fail.) =item * On VMS, C<Time::HiRes> tests will fail due to a bug in the CRTL's implementation of C<setitimer>: previous timer values would be cleared if a timer expired but not if the timer was reset before expiring. HP OpenVMS Engineering have corrected the problem and will release a patch in due course (Quix case # QXCM1001115136). =item * On VMS, there were a handful of C<Module::Build> test failures we didn't get to before the release; please watch CPAN for updates. =back =head1 Errata =head2 keys(), values(), and each() work on arrays You can now use the keys(), values(), and each() builtins on arrays; previously you could use them only on hashes. See L<perlfunc> for details. This is actually a change introduced in perl 5.12.0, but it was missed from that release's L<perl5120delta>. =head2 split() and C<@_> split() no longer modifies C<@_> when called in scalar or void context. In void context it now produces a "Useless use of split" warning. This was also a perl 5.12.0 change that missed the perldelta. =head1 Obituary Randy Kobes, creator of http://kobesearch.cpan.org/ and contributor/maintainer to several core Perl toolchain modules, passed away on September 18, 2010 after a battle with lung cancer. The community was richer for his involvement. He will be missed. =head1 Acknowledgements Perl 5.14.0 represents one year of development since Perl 5.12.0 and contains nearly 550,000 lines of changes across nearly 3,000 files from 150 authors and committers. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.14.0: Aaron Crane, Abhijit Menon-Sen, Abigail, Ævar Arnfjörð Bjarmason, Alastair Douglas, Alexander Alekseev, Alexander Hartmaier, Alexandr Ciornii, Alex Davies, Alex Vandiver, Ali Polatel, Allen Smith, Andreas König, Andrew Rodland, Andy Armstrong, Andy Dougherty, Aristotle Pagaltzis, Arkturuz, Arvan, A. Sinan Unur, Ben Morrow, Bo Lindbergh, Boris Ratner, Brad Gilbert, Bram, brian d foy, Brian Phillips, Casey West, Charles Bailey, Chas. Owens, Chip Salzenberg, Chris 'BinGOs' Williams, chromatic, Craig A. Berry, Curtis Jewell, Dagfinn Ilmari Mannsåker, Dan Dascalescu, Dave Rolsky, David Caldwell, David Cantrell, David Golden, David Leadbeater, David Mitchell, David Wheeler, Eric Brine, Father Chrysostomos, Fingle Nark, Florian Ragwitz, Frank Wiegand, Franz Fasching, Gene Sullivan, George Greer, Gerard Goossen, Gisle Aas, Goro Fuji, Grant McLean, gregor herrmann, H.Merijn Brand, Hongwen Qiu, Hugo van der Sanden, Ian Goodacre, James E Keenan, James Mastros, Jan Dubois, Jay Hannah, Jerry D. Hedden, Jesse Vincent, Jim Cromie, Jirka Hruška, John Peacock, Joshua ben Jore, Joshua Pritikin, Karl Williamson, Kevin Ryde, kmx, Lars Dɪᴇᴄᴋᴏᴡ 迪拉斯, Larwan Berke, Leon Brocard, Leon Timmermans, Lubomir Rintel, Lukas Mai, Maik Hentsche, Marty Pauley, Marvin Humphrey, Matt Johnson, Matt S Trout, Max Maischein, Michael Breen, Michael Fig, Michael G Schwern, Michael Parker, Michael Stevens, Michael Witten, Mike Kelly, Moritz Lenz, Nicholas Clark, Nick Cleaton, Nick Johnston, Nicolas Kaiser, Niko Tyni, Noirin Shirley, Nuno Carvalho, Paul Evans, Paul Green, Paul Johnson, Paul Marquess, Peter J. Holzer, Peter John Acklam, Peter Martini, Philippe Bruhat (BooK), Piotr Fusik, Rafael Garcia-Suarez, Rainer Tammer, Reini Urban, Renee Baecker, Ricardo Signes, Richard Möhn, Richard Soderberg, Rob Hoelz, Robin Barker, Ruslan Zakirov, Salvador Fandiño, Salvador Ortiz Garcia, Shlomi Fish, Sinan Unur, Sisyphus, Slaven Rezic, Steffen Müller, Steve Hay, Steven Schubiger, Steve Peters, Sullivan Beck, Tatsuhiko Miyagawa, Tim Bunce, Todd Rinaldo, Tom Christiansen, Tom Hukins, Tony Cook, Tye McQueen, Vadim Konovalov, Vernon Lyon, Vincent Pit, Walt Mankowski, Wolfram Humann, Yves Orton, Zefram, and Zsbán Ambrus. This is woefully incomplete as it's automatically generated from version control history. In particular, it doesn't include the names of the (very much appreciated) contributors who reported issues in previous versions of Perl that helped make Perl 5.14.0 better. For a more complete list of all of Perl's historical contributors, please see the C<AUTHORS> file in the Perl 5.14.0 distribution. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the Perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who are able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please use this address for security issues in the Perl core I<only>, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlootut.pod 0000644 00000064205 15125556335 0007326 0 ustar 00 =encoding utf8 =for comment Consistent formatting of this file is achieved with: perl ./Porting/podtidy pod/perlootut.pod =head1 NAME perlootut - Object-Oriented Programming in Perl Tutorial =head1 DATE This document was created in February, 2011, and the last major revision was in February, 2013. If you are reading this in the future then it's possible that the state of the art has changed. We recommend you start by reading the perlootut document in the latest stable release of Perl, rather than this version. =head1 DESCRIPTION This document provides an introduction to object-oriented programming in Perl. It begins with a brief overview of the concepts behind object oriented design. Then it introduces several different OO systems from L<CPAN|https://www.cpan.org> which build on top of what Perl provides. By default, Perl's built-in OO system is very minimal, leaving you to do most of the work. This minimalism made a lot of sense in 1994, but in the years since Perl 5.0 we've seen a number of common patterns emerge in Perl OO. Fortunately, Perl's flexibility has allowed a rich ecosystem of Perl OO systems to flourish. If you want to know how Perl OO works under the hood, the L<perlobj> document explains the nitty gritty details. This document assumes that you already understand the basics of Perl syntax, variable types, operators, and subroutine calls. If you don't understand these concepts yet, please read L<perlintro> first. You should also read the L<perlsyn>, L<perlop>, and L<perlsub> documents. =head1 OBJECT-ORIENTED FUNDAMENTALS Most object systems share a number of common concepts. You've probably heard terms like "class", "object, "method", and "attribute" before. Understanding the concepts will make it much easier to read and write object-oriented code. If you're already familiar with these terms, you should still skim this section, since it explains each concept in terms of Perl's OO implementation. Perl's OO system is class-based. Class-based OO is fairly common. It's used by Java, C++, C#, Python, Ruby, and many other languages. There are other object orientation paradigms as well. JavaScript is the most popular language to use another paradigm. JavaScript's OO system is prototype-based. =head2 Object An B<object> is a data structure that bundles together data and subroutines which operate on that data. An object's data is called B<attributes>, and its subroutines are called B<methods>. An object can be thought of as a noun (a person, a web service, a computer). An object represents a single discrete thing. For example, an object might represent a file. The attributes for a file object might include its path, content, and last modification time. If we created an object to represent F</etc/hostname> on a machine named "foo.example.com", that object's path would be "/etc/hostname", its content would be "foo\n", and it's last modification time would be 1304974868 seconds since the beginning of the epoch. The methods associated with a file might include C<rename()> and C<write()>. In Perl most objects are hashes, but the OO systems we recommend keep you from having to worry about this. In practice, it's best to consider an object's internal data structure opaque. =head2 Class A B<class> defines the behavior of a category of objects. A class is a name for a category (like "File"), and a class also defines the behavior of objects in that category. All objects belong to a specific class. For example, our F</etc/hostname> object belongs to the C<File> class. When we want to create a specific object, we start with its class, and B<construct> or B<instantiate> an object. A specific object is often referred to as an B<instance> of a class. In Perl, any package can be a class. The difference between a package which is a class and one which isn't is based on how the package is used. Here's our "class declaration" for the C<File> class: package File; In Perl, there is no special keyword for constructing an object. However, most OO modules on CPAN use a method named C<new()> to construct a new object: my $hostname = File->new( path => '/etc/hostname', content => "foo\n", last_mod_time => 1304974868, ); (Don't worry about that C<< -> >> operator, it will be explained later.) =head3 Blessing As we said earlier, most Perl objects are hashes, but an object can be an instance of any Perl data type (scalar, array, etc.). Turning a plain data structure into an object is done by B<blessing> that data structure using Perl's C<bless> function. While we strongly suggest you don't build your objects from scratch, you should know the term B<bless>. A B<blessed> data structure (aka "a referent") is an object. We sometimes say that an object has been "blessed into a class". Once a referent has been blessed, the C<blessed> function from the L<Scalar::Util> core module can tell us its class name. This subroutine returns an object's class when passed an object, and false otherwise. use Scalar::Util 'blessed'; print blessed($hash); # undef print blessed($hostname); # File =head3 Constructor A B<constructor> creates a new object. In Perl, a class's constructor is just another method, unlike some other languages, which provide syntax for constructors. Most Perl classes use C<new> as the name for their constructor: my $file = File->new(...); =head2 Methods You already learned that a B<method> is a subroutine that operates on an object. You can think of a method as the things that an object can I<do>. If an object is a noun, then methods are its verbs (save, print, open). In Perl, methods are simply subroutines that live in a class's package. Methods are always written to receive the object as their first argument: sub print_info { my $self = shift; print "This file is at ", $self->path, "\n"; } $file->print_info; # The file is at /etc/hostname What makes a method special is I<how it's called>. The arrow operator (C<< -> >>) tells Perl that we are calling a method. When we make a method call, Perl arranges for the method's B<invocant> to be passed as the first argument. B<Invocant> is a fancy name for the thing on the left side of the arrow. The invocant can either be a class name or an object. We can also pass additional arguments to the method: sub print_info { my $self = shift; my $prefix = shift // "This file is at "; print $prefix, ", ", $self->path, "\n"; } $file->print_info("The file is located at "); # The file is located at /etc/hostname =head2 Attributes Each class can define its B<attributes>. When we instantiate an object, we assign values to those attributes. For example, every C<File> object has a path. Attributes are sometimes called B<properties>. Perl has no special syntax for attributes. Under the hood, attributes are often stored as keys in the object's underlying hash, but don't worry about this. We recommend that you only access attributes via B<accessor> methods. These are methods that can get or set the value of each attribute. We saw this earlier in the C<print_info()> example, which calls C<< $self->path >>. You might also see the terms B<getter> and B<setter>. These are two types of accessors. A getter gets the attribute's value, while a setter sets it. Another term for a setter is B<mutator> Attributes are typically defined as read-only or read-write. Read-only attributes can only be set when the object is first created, while read-write attributes can be altered at any time. The value of an attribute may itself be another object. For example, instead of returning its last mod time as a number, the C<File> class could return a L<DateTime> object representing that value. It's possible to have a class that does not expose any publicly settable attributes. Not every class has attributes and methods. =head2 Polymorphism B<Polymorphism> is a fancy way of saying that objects from two different classes share an API. For example, we could have C<File> and C<WebPage> classes which both have a C<print_content()> method. This method might produce different output for each class, but they share a common interface. While the two classes may differ in many ways, when it comes to the C<print_content()> method, they are the same. This means that we can try to call the C<print_content()> method on an object of either class, and B<we don't have to know what class the object belongs to!> Polymorphism is one of the key concepts of object-oriented design. =head2 Inheritance B<Inheritance> lets you create a specialized version of an existing class. Inheritance lets the new class reuse the methods and attributes of another class. For example, we could create an C<File::MP3> class which B<inherits> from C<File>. An C<File::MP3> B<is-a> I<more specific> type of C<File>. All mp3 files are files, but not all files are mp3 files. We often refer to inheritance relationships as B<parent-child> or C<superclass>/C<subclass> relationships. Sometimes we say that the child has an B<is-a> relationship with its parent class. C<File> is a B<superclass> of C<File::MP3>, and C<File::MP3> is a B<subclass> of C<File>. package File::MP3; use parent 'File'; The L<parent> module is one of several ways that Perl lets you define inheritance relationships. Perl allows multiple inheritance, which means that a class can inherit from multiple parents. While this is possible, we strongly recommend against it. Generally, you can use B<roles> to do everything you can do with multiple inheritance, but in a cleaner way. Note that there's nothing wrong with defining multiple subclasses of a given class. This is both common and safe. For example, we might define C<File::MP3::FixedBitrate> and C<File::MP3::VariableBitrate> classes to distinguish between different types of mp3 file. =head3 Overriding methods and method resolution Inheritance allows two classes to share code. By default, every method in the parent class is also available in the child. The child can explicitly B<override> a parent's method to provide its own implementation. For example, if we have an C<File::MP3> object, it has the C<print_info()> method from C<File>: my $cage = File::MP3->new( path => 'mp3s/My-Body-Is-a-Cage.mp3', content => $mp3_data, last_mod_time => 1304974868, title => 'My Body Is a Cage', ); $cage->print_info; # The file is at mp3s/My-Body-Is-a-Cage.mp3 If we wanted to include the mp3's title in the greeting, we could override the method: package File::MP3; use parent 'File'; sub print_info { my $self = shift; print "This file is at ", $self->path, "\n"; print "Its title is ", $self->title, "\n"; } $cage->print_info; # The file is at mp3s/My-Body-Is-a-Cage.mp3 # Its title is My Body Is a Cage The process of determining what method should be used is called B<method resolution>. What Perl does is look at the object's class first (C<File::MP3> in this case). If that class defines the method, then that class's version of the method is called. If not, Perl looks at each parent class in turn. For C<File::MP3>, its only parent is C<File>. If C<File::MP3> does not define the method, but C<File> does, then Perl calls the method in C<File>. If C<File> inherited from C<DataSource>, which inherited from C<Thing>, then Perl would keep looking "up the chain" if necessary. It is possible to explicitly call a parent method from a child: package File::MP3; use parent 'File'; sub print_info { my $self = shift; $self->SUPER::print_info(); print "Its title is ", $self->title, "\n"; } The C<SUPER::> bit tells Perl to look for the C<print_info()> in the C<File::MP3> class's inheritance chain. When it finds the parent class that implements this method, the method is called. We mentioned multiple inheritance earlier. The main problem with multiple inheritance is that it greatly complicates method resolution. See L<perlobj> for more details. =head2 Encapsulation B<Encapsulation> is the idea that an object is opaque. When another developer uses your class, they don't need to know I<how> it is implemented, they just need to know I<what> it does. Encapsulation is important for several reasons. First, it allows you to separate the public API from the private implementation. This means you can change that implementation without breaking the API. Second, when classes are well encapsulated, they become easier to subclass. Ideally, a subclass uses the same APIs to access object data that its parent class uses. In reality, subclassing sometimes involves violating encapsulation, but a good API can minimize the need to do this. We mentioned earlier that most Perl objects are implemented as hashes under the hood. The principle of encapsulation tells us that we should not rely on this. Instead, we should use accessor methods to access the data in that hash. The object systems that we recommend below all automate the generation of accessor methods. If you use one of them, you should never have to access the object as a hash directly. =head2 Composition In object-oriented code, we often find that one object references another object. This is called B<composition>, or a B<has-a> relationship. Earlier, we mentioned that the C<File> class's C<last_mod_time> accessor could return a L<DateTime> object. This is a perfect example of composition. We could go even further, and make the C<path> and C<content> accessors return objects as well. The C<File> class would then be B<composed> of several other objects. =head2 Roles B<Roles> are something that a class I<does>, rather than something that it I<is>. Roles are relatively new to Perl, but have become rather popular. Roles are B<applied> to classes. Sometimes we say that classes B<consume> roles. Roles are an alternative to inheritance for providing polymorphism. Let's assume we have two classes, C<Radio> and C<Computer>. Both of these things have on/off switches. We want to model that in our class definitions. We could have both classes inherit from a common parent, like C<Machine>, but not all machines have on/off switches. We could create a parent class called C<HasOnOffSwitch>, but that is very artificial. Radios and computers are not specializations of this parent. This parent is really a rather ridiculous creation. This is where roles come in. It makes a lot of sense to create a C<HasOnOffSwitch> role and apply it to both classes. This role would define a known API like providing C<turn_on()> and C<turn_off()> methods. Perl does not have any built-in way to express roles. In the past, people just bit the bullet and used multiple inheritance. Nowadays, there are several good choices on CPAN for using roles. =head2 When to Use OO Object Orientation is not the best solution to every problem. In I<Perl Best Practices> (copyright 2004, Published by O'Reilly Media, Inc.), Damian Conway provides a list of criteria to use when deciding if OO is the right fit for your problem: =over 4 =item * The system being designed is large, or is likely to become large. =item * The data can be aggregated into obvious structures, especially if there's a large amount of data in each aggregate. =item * The various types of data aggregate form a natural hierarchy that facilitates the use of inheritance and polymorphism. =item * You have a piece of data on which many different operations are applied. =item * You need to perform the same general operations on related types of data, but with slight variations depending on the specific type of data the operations are applied to. =item * It's likely you'll have to add new data types later. =item * The typical interactions between pieces of data are best represented by operators. =item * The implementation of individual components of the system is likely to change over time. =item * The system design is already object-oriented. =item * Large numbers of other programmers will be using your code modules. =back =head1 PERL OO SYSTEMS As we mentioned before, Perl's built-in OO system is very minimal, but also quite flexible. Over the years, many people have developed systems which build on top of Perl's built-in system to provide more features and convenience. We strongly recommend that you use one of these systems. Even the most minimal of them eliminates a lot of repetitive boilerplate. There's really no good reason to write your classes from scratch in Perl. If you are interested in the guts underlying these systems, check out L<perlobj>. =head2 Moose L<Moose> bills itself as a "postmodern object system for Perl 5". Don't be scared, the "postmodern" label is a callback to Larry's description of Perl as "the first postmodern computer language". C<Moose> provides a complete, modern OO system. Its biggest influence is the Common Lisp Object System, but it also borrows ideas from Smalltalk and several other languages. C<Moose> was created by Stevan Little, and draws heavily from his work on the Raku OO design. Here is our C<File> class using C<Moose>: package File; use Moose; has path => ( is => 'ro' ); has content => ( is => 'ro' ); has last_mod_time => ( is => 'ro' ); sub print_info { my $self = shift; print "This file is at ", $self->path, "\n"; } C<Moose> provides a number of features: =over 4 =item * Declarative sugar C<Moose> provides a layer of declarative "sugar" for defining classes. That sugar is just a set of exported functions that make declaring how your class works simpler and more palatable. This lets you describe I<what> your class is, rather than having to tell Perl I<how> to implement your class. The C<has()> subroutine declares an attribute, and C<Moose> automatically creates accessors for these attributes. It also takes care of creating a C<new()> method for you. This constructor knows about the attributes you declared, so you can set them when creating a new C<File>. =item * Roles built-in C<Moose> lets you define roles the same way you define classes: package HasOnOffSwitch; use Moose::Role; has is_on => ( is => 'rw', isa => 'Bool', ); sub turn_on { my $self = shift; $self->is_on(1); } sub turn_off { my $self = shift; $self->is_on(0); } =item * A miniature type system In the example above, you can see that we passed C<< isa => 'Bool' >> to C<has()> when creating our C<is_on> attribute. This tells C<Moose> that this attribute must be a boolean value. If we try to set it to an invalid value, our code will throw an error. =item * Full introspection and manipulation Perl's built-in introspection features are fairly minimal. C<Moose> builds on top of them and creates a full introspection layer for your classes. This lets you ask questions like "what methods does the File class implement?" It also lets you modify your classes programmatically. =item * Self-hosted and extensible C<Moose> describes itself using its own introspection API. Besides being a cool trick, this means that you can extend C<Moose> using C<Moose> itself. =item * Rich ecosystem There is a rich ecosystem of C<Moose> extensions on CPAN under the L<MooseX|https://metacpan.org/search?q=MooseX> namespace. In addition, many modules on CPAN already use C<Moose>, providing you with lots of examples to learn from. =item * Many more features C<Moose> is a very powerful tool, and we can't cover all of its features here. We encourage you to learn more by reading the C<Moose> documentation, starting with L<Moose::Manual|https://metacpan.org/pod/Moose::Manual>. =back Of course, C<Moose> isn't perfect. C<Moose> can make your code slower to load. C<Moose> itself is not small, and it does a I<lot> of code generation when you define your class. This code generation means that your runtime code is as fast as it can be, but you pay for this when your modules are first loaded. This load time hit can be a problem when startup speed is important, such as with a command-line script or a "plain vanilla" CGI script that must be loaded each time it is executed. Before you panic, know that many people do use C<Moose> for command-line tools and other startup-sensitive code. We encourage you to try C<Moose> out first before worrying about startup speed. C<Moose> also has several dependencies on other modules. Most of these are small stand-alone modules, a number of which have been spun off from C<Moose>. C<Moose> itself, and some of its dependencies, require a compiler. If you need to install your software on a system without a compiler, or if having I<any> dependencies is a problem, then C<Moose> may not be right for you. =head3 Moo If you try C<Moose> and find that one of these issues is preventing you from using C<Moose>, we encourage you to consider L<Moo> next. C<Moo> implements a subset of C<Moose>'s functionality in a simpler package. For most features that it does implement, the end-user API is I<identical> to C<Moose>, meaning you can switch from C<Moo> to C<Moose> quite easily. C<Moo> does not implement most of C<Moose>'s introspection API, so it's often faster when loading your modules. Additionally, none of its dependencies require XS, so it can be installed on machines without a compiler. One of C<Moo>'s most compelling features is its interoperability with C<Moose>. When someone tries to use C<Moose>'s introspection API on a C<Moo> class or role, it is transparently inflated into a C<Moose> class or role. This makes it easier to incorporate C<Moo>-using code into a C<Moose> code base and vice versa. For example, a C<Moose> class can subclass a C<Moo> class using C<extends> or consume a C<Moo> role using C<with>. The C<Moose> authors hope that one day C<Moo> can be made obsolete by improving C<Moose> enough, but for now it provides a worthwhile alternative to C<Moose>. =head2 Class::Accessor L<Class::Accessor> is the polar opposite of C<Moose>. It provides very few features, nor is it self-hosting. It is, however, very simple, pure Perl, and it has no non-core dependencies. It also provides a "Moose-like" API on demand for the features it supports. Even though it doesn't do much, it is still preferable to writing your own classes from scratch. Here's our C<File> class with C<Class::Accessor>: package File; use Class::Accessor 'antlers'; has path => ( is => 'ro' ); has content => ( is => 'ro' ); has last_mod_time => ( is => 'ro' ); sub print_info { my $self = shift; print "This file is at ", $self->path, "\n"; } The C<antlers> import flag tells C<Class::Accessor> that you want to define your attributes using C<Moose>-like syntax. The only parameter that you can pass to C<has> is C<is>. We recommend that you use this Moose-like syntax if you choose C<Class::Accessor> since it means you will have a smoother upgrade path if you later decide to move to C<Moose>. Like C<Moose>, C<Class::Accessor> generates accessor methods and a constructor for your class. =head2 Class::Tiny Finally, we have L<Class::Tiny>. This module truly lives up to its name. It has an incredibly minimal API and absolutely no dependencies on any recent Perl. Still, we think it's a lot easier to use than writing your own OO code from scratch. Here's our C<File> class once more: package File; use Class::Tiny qw( path content last_mod_time ); sub print_info { my $self = shift; print "This file is at ", $self->path, "\n"; } That's it! With C<Class::Tiny>, all accessors are read-write. It generates a constructor for you, as well as the accessors you define. You can also use L<Class::Tiny::Antlers> for C<Moose>-like syntax. =head2 Role::Tiny As we mentioned before, roles provide an alternative to inheritance, but Perl does not have any built-in role support. If you choose to use Moose, it comes with a full-fledged role implementation. However, if you use one of our other recommended OO modules, you can still use roles with L<Role::Tiny> C<Role::Tiny> provides some of the same features as Moose's role system, but in a much smaller package. Most notably, it doesn't support any sort of attribute declaration, so you have to do that by hand. Still, it's useful, and works well with C<Class::Accessor> and C<Class::Tiny> =head2 OO System Summary Here's a brief recap of the options we covered: =over 4 =item * L<Moose> C<Moose> is the maximal option. It has a lot of features, a big ecosystem, and a thriving user base. We also covered L<Moo> briefly. C<Moo> is C<Moose> lite, and a reasonable alternative when Moose doesn't work for your application. =item * L<Class::Accessor> C<Class::Accessor> does a lot less than C<Moose>, and is a nice alternative if you find C<Moose> overwhelming. It's been around a long time and is well battle-tested. It also has a minimal C<Moose> compatibility mode which makes moving from C<Class::Accessor> to C<Moose> easy. =item * L<Class::Tiny> C<Class::Tiny> is the absolute minimal option. It has no dependencies, and almost no syntax to learn. It's a good option for a super minimal environment and for throwing something together quickly without having to worry about details. =item * L<Role::Tiny> Use C<Role::Tiny> with C<Class::Accessor> or C<Class::Tiny> if you find yourself considering multiple inheritance. If you go with C<Moose>, it comes with its own role implementation. =back =head2 Other OO Systems There are literally dozens of other OO-related modules on CPAN besides those covered here, and you're likely to run across one or more of them if you work with other people's code. In addition, plenty of code in the wild does all of its OO "by hand", using just the Perl built-in OO features. If you need to maintain such code, you should read L<perlobj> to understand exactly how Perl's built-in OO works. =head1 CONCLUSION As we said before, Perl's minimal OO system has led to a profusion of OO systems on CPAN. While you can still drop down to the bare metal and write your classes by hand, there's really no reason to do that with modern Perl. For small systems, L<Class::Tiny> and L<Class::Accessor> both provide minimal object systems that take care of basic boilerplate for you. For bigger projects, L<Moose> provides a rich set of features that will let you focus on implementing your business logic. L<Moo> provides a nice alternative to L<Moose> when you want a lot of features but need faster compile time or to avoid XS. We encourage you to play with and evaluate L<Moose>, L<Moo>, L<Class::Accessor>, and L<Class::Tiny> to see which OO system is right for you. =cut perlko.pod 0000644 00000027660 15125556335 0006571 0 ustar 00 =encoding utf8 이 파일을 내용 그대로 읽고 있다면 우스꽝스러운 문자는 무시해주세요. 이 문서는 POD로 읽을 수 있도록 POD 형식(F<pod/perlpod.pod> 문서를 확인하세요)으로 작성되어 있습니다. =head1 NAME perlko - 한국어 Perl 안내서 =head1 DESCRIPTION Perl의 세계에 오신 것을 환영합니다! Perl은 가끔 B<'Practical Extraction and Report Language'>라고 하기도 합니다만 다른 널리 알려진 것들 중에서 B<'Pathologically Eclectic Rubbish Lister'>라고 하기도 합니다. 사실 이것은 끼워 맞춘 것이며 Perl이 이것들의 첫 글자를 가져와서 이름을 붙인 것은 아닙니다. Perl의 창시자 Larry가 첫 번째 이름을 먼저 생각했고 널리 알려진 것을 나중에 지었기 때문입니다. 그렇기 때문에 B<'Perl'>은 모두 대문자가 아닙니다. 널리 알려진 어떤 것을 가지고 논쟁하는 것은 의미가 없습니다. Larry는 두 개 다 지지합니다. 가끔 p가 소문자로 작성된 B<'perl'>을 볼 것입니다. P가 대문자로 되어 있는 B<'Perl'>은 언어를 참조할 때 쓰이며 B<'perl'>처럼 p가 소문자인 경우는 여러분의 프로그램을 컴파일하고 돌릴 때 사용되는 해석기를 지칭할 때 사용됩니다. =head1 Perl에 관하여 Perl은 본래 문자열 생성을 위해 만들졌지만 지금은 시스템 관리와 웹 개발, 네트워크 프로그래밍, GUI 개발 등을 포함한 여러 분야에서 널리 사용되는 범용 프로그래밍 언어입니다. 이 언어는 아름다움(아주 작고, 우아하고, 아주 적고)보다 실용적(사용하기 쉽고, 효율적이며, 가능한 최대한)인 것을 지향하고 있습니다. 사용하기 쉽고, 절차적 프로그래밍과 객체 지향 프로그래밍을 모두 지원하고, 강력한 문자열 처리 기능을 내장하고, 세상에서 가장 인상적인 제 3자의 모듈 모음처를 가지고 있다는 것은 Perl의 가장 중요한 특징입니다. Perl의 언어적 특징은 F<pod/perlintro.pod> 문서에서 소개합니다. 이번 릴리스에서 가장 중요한 변화는 F<pod/perldelta.pod>에서 논의합니다. 또한 다양한 출판사가 출판한 많은 Perl 책은 다양한 주제를 다루고 있습니다. 자세한 정보는 F<pod/perlbook.pod> 문서를 확인하세요. =head1 설치 여러분이 비교적 현대의 운영체제를 사용하고 있고 현재 버전의 Perl을 지역적으로 설치하고 싶다면 다음 명령을 실행하세요. ./Configure -des -Dprefix=$HOME/localperl make test make install 앞의 명령은 여러분의 플랫폼에 맞게 환경을 설정하고 컴파일을 수행한 후, 회기 테스트를 수행한뒤, 홈 디렉터리 하부의 F<localperl> 디렉터리에 perl을 설치합니다. 여러분이 어떠한 문제든 겪게 되거나 사용자 정의 버전 Perl을 설치할 필요가 있다면 현재 배포판에 들어있는 F<INSTALL> 파일 안의 자세한 설명을 읽어야 합니다. 추가적으로 일반적이지 않은 다양한 플랫폼에서 Perl을 빌드하고 사용하는 방법에 대한 도움말과 귀띔이 적혀있는 많은 수의 F<README> 파일이 있습니다. 일단 Perl을 설치하고 나면 C<perldoc> 도구를 이용해 풍부한 문서를 사용할 수 있습니다. 시작하기 위해서 다음 명령을 실행하세요. perldoc perl =head1 실행에 어려움을 겪는다면 Perl은 뜨개질에서 부터 로켓 과학까지 모든 분야에서 사용할 수 있는 크고 복잡한 시스템입니다. 여러분이 어려움에 부딪혔을때 그 문제는 이미 다른 사람이 해결했을 가능성이 높습니다. 문서를 모두 확인했는데도 버그가 확실하다면 C<perlbug> 도구를 이용해서 저희에게 버그를 보고해주세요. C<perlbug>에 대한 더 자세한 정보는 C<perldoc perlbug> 또는 C<perlbug>를 명령줄에서 실행해서 확인할 수 있습니다. Perl을 사용 가능하게 만들었다 하더라도 Perl은 계속해서 진화하기 때문에 여러분이 맞닥뜨린 버그를 수정했거나 여러분이 유용하다고 생각할법한 새로운 기능이 추가된 좀 더 최신 버전이 있을 수 있습니다. 여러분은 항상 최신 버전의 perl을 CPAN (Comprehensive Perl Archive Network) 사이트 L<http://www.cpan.org/src/> 에서 찾을 수 있습니다. perl 소스에 간단한 패치를 등록하고 싶다면 F<pod/perlhack.pod> 문서의 B<"SUPER QUICK PATCH GUIDE">를 살펴보세요. 그냥 개인적으로 참고하세요. 제가 이것처럼 멋진 물건을 만든다는 것을 여러분이 알기를 바랍니다. 그것은 제 이야기의 B<"저자(Author)">를 기쁘게하기 때문입니다. 이것이 여러분을 귀찮게 한다면 여러분의 B<"저작(Authorship)">에 대한 생각을 정정해야 할 수도 있습니다. 하지만 어쨌거나 여러분은 Perl을 사용하는데는 문제가 없답니다. :-) - B<"저자">로부터. =head1 인코딩 Perl은 5.8.0판부터 유니코드/ISO 10646에 대해 광범위하게 지원합니다. 유니코드 지원의 일환으로 한중일을 비롯한 세계 각국에서 유니코드 이전에 쓰고 있었고 지금도 널리 쓰이고 있는 수많은 인코딩을 지원합니다. 유니코드는 전 세계에서 쓰이는 모든 언어를 위한 표기 체계(유럽의 라틴 알파벳, 키릴 알파벳, 그리스 알파벳, 인도와 동남 아시아의 브라미 계열 스크립트, 아랍 문자, 히브리 문자, 한중일의 한자, 한국어의 한글, 일본어의 가나, 북미 인디안의 표기 체계 등)를 수용하는 것을 목표로 하고 있기 때문에 기존에 쓰이던 각 언어 및 국가 그리고 운영 체계에 고유한 문자 집합과 인코딩에 쓸 수 있는 모든 글자는 물론이고 기존 문자 집합에서 지원하고 있지 않던 아주 많은 글자를 포함하고 있습니다. Perl은 내부적으로 유니코드를 문자 표현을 위해 사용합니다. 보다 구체적으로 말하면 Perl 스크립트 안에서 UTF-8 문자열을 쓸 수 있고, 각종 함수와 연산자(예를 들어, 정규식, index, substr)가 바이트 단위 대신 유니코드 글자 단위로 동작합니다. 더 자세한 것은 F<pod/perlunicode.pod> 문서를 참고하세요. 유니코드가 널리 보급되기 전에 널리 쓰이고 있었고, 여전히 널리 쓰이고 있는 각국/각 언어별 인코딩으로 입출력을 하고 이들 인코딩으로 된 데이터와 문서를 다루는 것을 돕기 위해 L<Encode> 모듈이 쓰이고 있습니다. 무엇보다 L<Encode> 모듈을 사용하면 수많은 인코딩 사이의 변환을 쉽게 할 수 있습니다. =head2 Encode 모듈 =head3 지원 인코딩 L<Encode> 모듈은 다음과 같은 한국어 인코딩을 지원합니다. =over 4 =item * C<euc-kr> US-ASCII와 KS X 1001을 같이 쓰는 멀티바이트 인코딩으로 흔히 완성형이라고 불림. KS X 2901과 RFC 1557 참고. =item * C<cp949> MS-Windows 9x/ME에서 쓰이는 확장 완성형. euc-kr에 8,822자의 한글 음절을 더한 것임. alias는 uhc, windows-949, x-windows-949, ks_c_5601-1987. 맨 마지막 이름은 적절하지 않은 이름이지만, Microsoft 제품에서 CP949의 의미로 쓰이고 있음. =item * C<johab> KS X 1001:1998 부록 3에서 규정한 조합형. 문자 레퍼토리는 cp949와 마찬가지로 US-ASCII와 KS X 1001에 8,822자의 한글 음절을 더한 것으로 인코딩 방식은 전혀 다름. =item * C<iso-2022-kr> RFC 1557에서 규정한 한국어 인터넷 메일 교환용 인코딩으로 US-ASCII와 KS X 1001을 레퍼토리로 하는 점에서 euc-kr과 같지만 인코딩 방식이 다름. 1997-8년 경까지 쓰였으나 더 이상 메일 교환에 쓰이지 않음. =item * C<ksc5601-raw> KS X 1001(KS C 5601)을 GL(즉, MSB를 0으로 한 경우)에 놓았을 때의 인코딩. US-ASCII와 결합하지 않고 단독으로 쓰이는 일은 X11 등에서 글꼴 인코딩(ksc5601.1987-0. '0'은 GL을 의미함)으로 쓰이는 것을 제외하고는 거의 없음. KS C 5601은 1997년 KS X 1001로 이름을 바꾸었음. 1998년에는 두 글자(유로화 부호와 등록 상표 부호)가 더해졌음. =back =head3 변환 예제 예를 들어, euc-kr 인코딩으로 된 파일을 UTF-8로 변환하려면 명령줄에서 다음처럼 실행합니다. perl -Mencoding=euc-kr,STDOUT,utf8 -pe1 < file.euc-kr > file.utf8 반대로 변환할 경우 다음처럼 실행합니다. perl -Mencoding=utf8,STDOUT,euc-kr -pe1 < file.utf8 > file.euc-kr 이런 변환을 좀더 편리하게 할 수 있도록 도와주는 F<piconv>가 Perl에 기본으로 들어있습니다. 이 유틸리티는 L<Encode> 모듈을 이용한 순수 Perl 유틸리티로 이름에서 알 수 있듯이 Unix의 C<iconv>를 모델로 한 것입니다. 사용법은 다음과 같습니다. piconv -f euc-kr -t utf8 < file.euc-kr > file.utf8 piconv -f utf8 -t euc-kr < file.utf8 > file.euc-kr =head3 모범 사례 Perl은 기본적으로 내부에서 UTF-8을 사용하며 Encode 모듈을 통해 다양한 인코딩을 지원하지만 항상 다음 규칙을 지킴으로써 인코딩과 관련한 다양하게 발생할 수 있는 문제의 가능성을 줄이는 것을 추천합니다. =over 4 =item * 소스 코드는 항상 UTF-8 인코딩으로 저장 =item * 소스 코드 상단에 C<use utf8;> 프라그마 사용 =item * 소스 코드, 터미널, 운영체제, 데이터 인코딩을 분리해서 이해 =item * 입출력 파일 핸들에 명시적인 인코딩을 사용 =item * 중복(double) 인코딩을 주의 =back =head3 유니코드 및 한국어 인코딩 관련 자료 =over 4 =item * L<perluniintro> =item * L<perlunicode> =item * L<Encode> =item * L<Encode::KR> =item * L<encoding> =item * L<https://www.unicode.org/> 유니코드 컨소시엄 =item * L<https://std.dkuug.dk/JTC1/SC2/WG2> 기본적으로 Unicode와 같은 ISO 표준인 ISO/IEC 10646 UCS(Universal Character Set)을 만드는 ISO/IEC JTC1/SC2/WG2의 웹 페이지 =item * L<https://www.cl.cam.ac.uk/~mgk25/unicode.html> 유닉스/리눅스 사용자를 위한 UTF-8 및 유니코드 관련 FAQ =item * L<http://wiki.kldp.org/Translations/html/UTF8-Unicode-KLDP/UTF8-Unicode-KLDP.html> 유닉스/리눅스 사용자를 위한 UTF-8 및 유니코드 관련 FAQ의 한국어 번역 =back =head1 Perl 관련 자료 다음은 공식적인 Perl 관련 자료중 일부입니다. =over 4 =item * L<https://www.perl.org/> Perl 공식 홈페이지 =item * L<https://www.perl.com/> O'Reilly의 Perl 웹 페이지 =item * L<https://www.cpan.org/> CPAN - Comprehensive Perl Archive Network, 통합적 Perl 파일 보관 네트워크 =item * L<https://metacpan.org> 메타 CPAN =item * L<https://lists.perl.org/> Perl 메일링 리스트 =item * L<https://blogs.perl.org/> Perl 메타 블로그 =item * L<https://www.perlmonks.org/> Perl 수도승들을 위한 수도원 =item * L<https://www.pm.org/groups/asia.html> 아시아 지역 Perl 몽거스 모임 =item * L<http://www.perladvent.org/> Perl 크리스마스 달력 =back 다음은 Perl을 더 깊게 공부하는데 도움을 줄 수 있는 한국어 관련 사이트입니다. =over 4 =item * L<https://perl.kr/> 한국 Perl 커뮤니티 공식 포털 =item * L<https://doc.perl.kr/> Perl 문서 한글화 프로젝트 =item * L<https://cafe.naver.com/perlstudy.cafe> 네이버 Perl 카페 =item * L<http://www.perl.or.kr/> 한국 Perl 사용자 모임 =item * L<https://advent.perl.kr> Seoul.pm Perl 크리스마스 달력 (2010 ~ 2012) =item * L<http://gypark.pe.kr/wiki/Perl> GYPARK(Geunyoung Park)의 Perl 관련 한글 문서 저장소 =back =head1 라이센스 F<README> 파일의 B<'LICENSING'> 항목을 참고하세요. =head1 AUTHORS =over =item * Jarkko Hietaniemi E<lt>jhi@iki.fiE<gt> =item * 신정식 E<lt>jshin@mailaps.orgE<gt> =item * 김도형 E<lt>keedi@cpan.orgE<gt> =back =cut perldebtut.pod 0000644 00000053210 15125556335 0007435 0 ustar 00 =head1 NAME perldebtut - Perl debugging tutorial =head1 DESCRIPTION A (very) lightweight introduction in the use of the perl debugger, and a pointer to existing, deeper sources of information on the subject of debugging perl programs. There's an extraordinary number of people out there who don't appear to know anything about using the perl debugger, though they use the language every day. This is for them. =head1 use strict First of all, there's a few things you can do to make your life a lot more straightforward when it comes to debugging perl programs, without using the debugger at all. To demonstrate, here's a simple script, named "hello", with a problem: #!/usr/bin/perl $var1 = 'Hello World'; # always wanted to do that :-) $var2 = "$varl\n"; print $var2; exit; While this compiles and runs happily, it probably won't do what's expected, namely it doesn't print "Hello World\n" at all; It will on the other hand do exactly what it was told to do, computers being a bit that way inclined. That is, it will print out a newline character, and you'll get what looks like a blank line. It looks like there's 2 variables when (because of the typo) there's really 3: $var1 = 'Hello World'; $varl = undef; $var2 = "\n"; To catch this kind of problem, we can force each variable to be declared before use by pulling in the strict module, by putting 'use strict;' after the first line of the script. Now when you run it, perl complains about the 3 undeclared variables and we get four error messages because one variable is referenced twice: Global symbol "$var1" requires explicit package name at ./t1 line 4. Global symbol "$var2" requires explicit package name at ./t1 line 5. Global symbol "$varl" requires explicit package name at ./t1 line 5. Global symbol "$var2" requires explicit package name at ./t1 line 7. Execution of ./hello aborted due to compilation errors. Luvverly! and to fix this we declare all variables explicitly and now our script looks like this: #!/usr/bin/perl use strict; my $var1 = 'Hello World'; my $varl = undef; my $var2 = "$varl\n"; print $var2; exit; We then do (always a good idea) a syntax check before we try to run it again: > perl -c hello hello syntax OK And now when we run it, we get "\n" still, but at least we know why. Just getting this script to compile has exposed the '$varl' (with the letter 'l') variable, and simply changing $varl to $var1 solves the problem. =head1 Looking at data and -w and v Ok, but how about when you want to really see your data, what's in that dynamic variable, just before using it? #!/usr/bin/perl use strict; my $key = 'welcome'; my %data = ( 'this' => qw(that), 'tom' => qw(and jerry), 'welcome' => q(Hello World), 'zip' => q(welcome), ); my @data = keys %data; print "$data{$key}\n"; exit; Looks OK, after it's been through the syntax check (perl -c scriptname), we run it and all we get is a blank line again! Hmmmm. One common debugging approach here, would be to liberally sprinkle a few print statements, to add a check just before we print out our data, and another just after: print "All OK\n" if grep($key, keys %data); print "$data{$key}\n"; print "done: '$data{$key}'\n"; And try again: > perl data All OK done: '' After much staring at the same piece of code and not seeing the wood for the trees for some time, we get a cup of coffee and try another approach. That is, we bring in the cavalry by giving perl the 'B<-d>' switch on the command line: > perl -d data Default die handler restored. Loading DB routines from perl5db.pl version 1.07 Editor support available. Enter h or `h h' for help, or `man perldebug' for more help. main::(./data:4): my $key = 'welcome'; Now, what we've done here is to launch the built-in perl debugger on our script. It's stopped at the first line of executable code and is waiting for input. Before we go any further, you'll want to know how to quit the debugger: use just the letter 'B<q>', not the words 'quit' or 'exit': DB<1> q > That's it, you're back on home turf again. =head1 help Fire the debugger up again on your script and we'll look at the help menu. There's a couple of ways of calling help: a simple 'B<h>' will get the summary help list, 'B<|h>' (pipe-h) will pipe the help through your pager (which is (probably 'more' or 'less'), and finally, 'B<h h>' (h-space-h) will give you the entire help screen. Here is the summary page: DB<1>h List/search source lines: Control script execution: l [ln|sub] List source code T Stack trace - or . List previous/current line s [expr] Single step [in expr] v [line] View around line n [expr] Next, steps over subs f filename View source in file <CR/Enter> Repeat last n or s /pattern/ ?patt? Search forw/backw r Return from subroutine M Show module versions c [ln|sub] Continue until position Debugger controls: L List break/watch/ actions o [...] Set debugger options t [expr] Toggle trace [trace expr] <[<]|{[{]|>[>] [cmd] Do pre/post-prompt b [ln|event|sub] [cnd] Set breakpoint ! [N|pat] Redo a previous command B ln|* Delete a/all breakpoints H [-num] Display last num commands a [ln] cmd Do cmd before line = [a val] Define/list an alias A ln|* Delete a/all actions h [db_cmd] Get help on command w expr Add a watch expression h h Complete help page W expr|* Delete a/all watch exprs |[|]db_cmd Send output to pager ![!] syscmd Run cmd in a subprocess q or ^D Quit R Attempt a restart Data Examination: expr Execute perl code, also see: s,n,t expr x|m expr Evals expr in list context, dumps the result or lists methods. p expr Print expression (uses script's current package). S [[!]pat] List subroutine names [not] matching pattern V [Pk [Vars]] List Variables in Package. Vars can be ~pattern or !pattern. X [Vars] Same as "V current_package [Vars]". y [n [Vars]] List lexicals in higher scope <n>. Vars same as V. For more help, type h cmd_letter, or run man perldebug for all docs. More confusing options than you can shake a big stick at! It's not as bad as it looks and it's very useful to know more about all of it, and fun too! There's a couple of useful ones to know about straight away. You wouldn't think we're using any libraries at all at the moment, but 'B<M>' will show which modules are currently loaded, and their version number, while 'B<m>' will show the methods, and 'B<S>' shows all subroutines (by pattern) as shown below. 'B<V>' and 'B<X>' show variables in the program by package scope and can be constrained by pattern. DB<2>S str dumpvar::stringify strict::bits strict::import strict::unimport Using 'X' and cousins requires you not to use the type identifiers ($@%), just the 'name': DM<3>X ~err FileHandle(stderr) => fileno(2) Remember we're in our tiny program with a problem, we should have a look at where we are, and what our data looks like. First of all let's view some code at our present position (the first line of code in this case), via 'B<v>': DB<4> v 1 #!/usr/bin/perl 2: use strict; 3 4==> my $key = 'welcome'; 5: my %data = ( 6 'this' => qw(that), 7 'tom' => qw(and jerry), 8 'welcome' => q(Hello World), 9 'zip' => q(welcome), 10 ); At line number 4 is a helpful pointer, that tells you where you are now. To see more code, type 'v' again: DB<4> v 8 'welcome' => q(Hello World), 9 'zip' => q(welcome), 10 ); 11: my @data = keys %data; 12: print "All OK\n" if grep($key, keys %data); 13: print "$data{$key}\n"; 14: print "done: '$data{$key}'\n"; 15: exit; And if you wanted to list line 5 again, type 'l 5', (note the space): DB<4> l 5 5: my %data = ( In this case, there's not much to see, but of course normally there's pages of stuff to wade through, and 'l' can be very useful. To reset your view to the line we're about to execute, type a lone period '.': DB<5> . main::(./data_a:4): my $key = 'welcome'; The line shown is the one that is about to be executed B<next>, it hasn't happened yet. So while we can print a variable with the letter 'B<p>', at this point all we'd get is an empty (undefined) value back. What we need to do is to step through the next executable statement with an 'B<s>': DB<6> s main::(./data_a:5): my %data = ( main::(./data_a:6): 'this' => qw(that), main::(./data_a:7): 'tom' => qw(and jerry), main::(./data_a:8): 'welcome' => q(Hello World), main::(./data_a:9): 'zip' => q(welcome), main::(./data_a:10): ); Now we can have a look at that first ($key) variable: DB<7> p $key welcome line 13 is where the action is, so let's continue down to there via the letter 'B<c>', which by the way, inserts a 'one-time-only' breakpoint at the given line or sub routine: DB<8> c 13 All OK main::(./data_a:13): print "$data{$key}\n"; We've gone past our check (where 'All OK' was printed) and have stopped just before the meat of our task. We could try to print out a couple of variables to see what is happening: DB<9> p $data{$key} Not much in there, lets have a look at our hash: DB<10> p %data Hello Worldziptomandwelcomejerrywelcomethisthat DB<11> p keys %data Hello Worldtomwelcomejerrythis Well, this isn't very easy to read, and using the helpful manual (B<h h>), the 'B<x>' command looks promising: DB<12> x %data 0 'Hello World' 1 'zip' 2 'tom' 3 'and' 4 'welcome' 5 undef 6 'jerry' 7 'welcome' 8 'this' 9 'that' That's not much help, a couple of welcomes in there, but no indication of which are keys, and which are values, it's just a listed array dump and, in this case, not particularly helpful. The trick here, is to use a B<reference> to the data structure: DB<13> x \%data 0 HASH(0x8194bc4) 'Hello World' => 'zip' 'jerry' => 'welcome' 'this' => 'that' 'tom' => 'and' 'welcome' => undef The reference is truly dumped and we can finally see what we're dealing with. Our quoting was perfectly valid but wrong for our purposes, with 'and jerry' being treated as 2 separate words rather than a phrase, thus throwing the evenly paired hash structure out of alignment. The 'B<-w>' switch would have told us about this, had we used it at the start, and saved us a lot of trouble: > perl -w data Odd number of elements in hash assignment at ./data line 5. We fix our quoting: 'tom' => q(and jerry), and run it again, this time we get our expected output: > perl -w data Hello World While we're here, take a closer look at the 'B<x>' command, it's really useful and will merrily dump out nested references, complete objects, partial objects - just about whatever you throw at it: Let's make a quick object and x-plode it, first we'll start the debugger: it wants some form of input from STDIN, so we give it something non-committal, a zero: > perl -de 0 Default die handler restored. Loading DB routines from perl5db.pl version 1.07 Editor support available. Enter h or `h h' for help, or `man perldebug' for more help. main::(-e:1): 0 Now build an on-the-fly object over a couple of lines (note the backslash): DB<1> $obj = bless({'unique_id'=>'123', 'attr'=> \ cont: {'col' => 'black', 'things' => [qw(this that etc)]}}, 'MY_class') And let's have a look at it: DB<2> x $obj 0 MY_class=HASH(0x828ad98) 'attr' => HASH(0x828ad68) 'col' => 'black' 'things' => ARRAY(0x828abb8) 0 'this' 1 'that' 2 'etc' 'unique_id' => 123 DB<3> Useful, huh? You can eval nearly anything in there, and experiment with bits of code or regexes until the cows come home: DB<3> @data = qw(this that the other atheism leather theory scythe) DB<4> p 'saw -> '.($cnt += map { print "\t:\t$_\n" } grep(/the/, sort @data)) atheism leather other scythe the theory saw -> 6 If you want to see the command History, type an 'B<H>': DB<5> H 4: p 'saw -> '.($cnt += map { print "\t:\t$_\n" } grep(/the/, sort @data)) 3: @data = qw(this that the other atheism leather theory scythe) 2: x $obj 1: $obj = bless({'unique_id'=>'123', 'attr'=> {'col' => 'black', 'things' => [qw(this that etc)]}}, 'MY_class') DB<5> And if you want to repeat any previous command, use the exclamation: 'B<!>': DB<5> !4 p 'saw -> '.($cnt += map { print "$_\n" } grep(/the/, sort @data)) atheism leather other scythe the theory saw -> 12 For more on references see L<perlref> and L<perlreftut> =head1 Stepping through code Here's a simple program which converts between Celsius and Fahrenheit, it too has a problem: #!/usr/bin/perl -w use strict; my $arg = $ARGV[0] || '-c20'; if ($arg =~ /^\-(c|f)((\-|\+)*\d+(\.\d+)*)$/) { my ($deg, $num) = ($1, $2); my ($in, $out) = ($num, $num); if ($deg eq 'c') { $deg = 'f'; $out = &c2f($num); } else { $deg = 'c'; $out = &f2c($num); } $out = sprintf('%0.2f', $out); $out =~ s/^((\-|\+)*\d+)\.0+$/$1/; print "$out $deg\n"; } else { print "Usage: $0 -[c|f] num\n"; } exit; sub f2c { my $f = shift; my $c = 5 * $f - 32 / 9; return $c; } sub c2f { my $c = shift; my $f = 9 * $c / 5 + 32; return $f; } For some reason, the Fahrenheit to Celsius conversion fails to return the expected output. This is what it does: > temp -c0.72 33.30 f > temp -f33.3 162.94 c Not very consistent! We'll set a breakpoint in the code manually and run it under the debugger to see what's going on. A breakpoint is a flag, to which the debugger will run without interruption, when it reaches the breakpoint, it will stop execution and offer a prompt for further interaction. In normal use, these debugger commands are completely ignored, and they are safe - if a little messy, to leave in production code. my ($in, $out) = ($num, $num); $DB::single=2; # insert at line 9! if ($deg eq 'c') ... > perl -d temp -f33.3 Default die handler restored. Loading DB routines from perl5db.pl version 1.07 Editor support available. Enter h or `h h' for help, or `man perldebug' for more help. main::(temp:4): my $arg = $ARGV[0] || '-c100'; We'll simply continue down to our pre-set breakpoint with a 'B<c>': DB<1> c main::(temp:10): if ($deg eq 'c') { Followed by a view command to see where we are: DB<1> v 7: my ($deg, $num) = ($1, $2); 8: my ($in, $out) = ($num, $num); 9: $DB::single=2; 10==> if ($deg eq 'c') { 11: $deg = 'f'; 12: $out = &c2f($num); 13 } else { 14: $deg = 'c'; 15: $out = &f2c($num); 16 } And a print to show what values we're currently using: DB<1> p $deg, $num f33.3 We can put another break point on any line beginning with a colon, we'll use line 17 as that's just as we come out of the subroutine, and we'd like to pause there later on: DB<2> b 17 There's no feedback from this, but you can see what breakpoints are set by using the list 'L' command: DB<3> L temp: 17: print "$out $deg\n"; break if (1) Note that to delete a breakpoint you use 'B'. Now we'll continue down into our subroutine, this time rather than by line number, we'll use the subroutine name, followed by the now familiar 'v': DB<3> c f2c main::f2c(temp:30): my $f = shift; DB<4> v 24: exit; 25 26 sub f2c { 27==> my $f = shift; 28: my $c = 5 * $f - 32 / 9; 29: return $c; 30 } 31 32 sub c2f { 33: my $c = shift; Note that if there was a subroutine call between us and line 29, and we wanted to B<single-step> through it, we could use the 'B<s>' command, and to step over it we would use 'B<n>' which would execute the sub, but not descend into it for inspection. In this case though, we simply continue down to line 29: DB<4> c 29 main::f2c(temp:29): return $c; And have a look at the return value: DB<5> p $c 162.944444444444 This is not the right answer at all, but the sum looks correct. I wonder if it's anything to do with operator precedence? We'll try a couple of other possibilities with our sum: DB<6> p (5 * $f - 32 / 9) 162.944444444444 DB<7> p 5 * $f - (32 / 9) 162.944444444444 DB<8> p (5 * $f) - 32 / 9 162.944444444444 DB<9> p 5 * ($f - 32) / 9 0.722222222222221 :-) that's more like it! Ok, now we can set our return variable and we'll return out of the sub with an 'r': DB<10> $c = 5 * ($f - 32) / 9 DB<11> r scalar context return from main::f2c: 0.722222222222221 Looks good, let's just continue off the end of the script: DB<12> c 0.72 c Debugged program terminated. Use q to quit or R to restart, use O inhibit_exit to avoid stopping after program termination, h q, h R or h O to get additional info. A quick fix to the offending line (insert the missing parentheses) in the actual program and we're finished. =head1 Placeholder for a, w, t, T Actions, watch variables, stack traces etc.: on the TODO list. a w t T =head1 REGULAR EXPRESSIONS Ever wanted to know what a regex looked like? You'll need perl compiled with the DEBUGGING flag for this one: > perl -Dr -e '/^pe(a)*rl$/i' Compiling REx `^pe(a)*rl$' size 17 first at 2 rarest char at 0 1: BOL(2) 2: EXACTF <pe>(4) 4: CURLYN[1] {0,32767}(14) 6: NOTHING(8) 8: EXACTF <a>(0) 12: WHILEM(0) 13: NOTHING(14) 14: EXACTF <rl>(16) 16: EOL(17) 17: END(0) floating `'$ at 4..2147483647 (checking floating) stclass `EXACTF <pe>' anchored(BOL) minlen 4 Omitting $` $& $' support. EXECUTING... Freeing REx: `^pe(a)*rl$' Did you really want to know? :-) For more gory details on getting regular expressions to work, have a look at L<perlre>, L<perlretut>, and to decode the mysterious labels (BOL and CURLYN, etc. above), see L<perldebguts>. =head1 OUTPUT TIPS To get all the output from your error log, and not miss any messages via helpful operating system buffering, insert a line like this, at the start of your script: $|=1; To watch the tail of a dynamically growing logfile, (from the command line): tail -f $error_log Wrapping all die calls in a handler routine can be useful to see how, and from where, they're being called, L<perlvar> has more information: BEGIN { $SIG{__DIE__} = sub { require Carp; Carp::confess(@_) } } Various useful techniques for the redirection of STDOUT and STDERR filehandles are explained in L<perlopentut> and L<perlfaq8>. =head1 CGI Just a quick hint here for all those CGI programmers who can't figure out how on earth to get past that 'waiting for input' prompt, when running their CGI script from the command-line, try something like this: > perl -d my_cgi.pl -nodebug Of course L<CGI> and L<perlfaq9> will tell you more. =head1 GUIs The command line interface is tightly integrated with an B<emacs> extension and there's a B<vi> interface too. You don't have to do this all on the command line, though, there are a few GUI options out there. The nice thing about these is you can wave a mouse over a variable and a dump of its data will appear in an appropriate window, or in a popup balloon, no more tiresome typing of 'x $varname' :-) In particular have a hunt around for the following: B<ptkdb> perlTK based wrapper for the built-in debugger B<ddd> data display debugger B<PerlDevKit> and B<PerlBuilder> are NT specific NB. (more info on these and others would be appreciated). =head1 SUMMARY We've seen how to encourage good coding practices with B<use strict> and B<-w>. We can run the perl debugger B<perl -d scriptname> to inspect your data from within the perl debugger with the B<p> and B<x> commands. You can walk through your code, set breakpoints with B<b> and step through that code with B<s> or B<n>, continue with B<c> and return from a sub with B<r>. Fairly intuitive stuff when you get down to it. There is of course lots more to find out about, this has just scratched the surface. The best way to learn more is to use perldoc to find out more about the language, to read the on-line help (L<perldebug> is probably the next place to go), and of course, experiment. =head1 SEE ALSO L<perldebug>, L<perldebguts>, L<perldiag>, L<perlrun> =head1 AUTHOR Richard Foley <richard.foley@rfi.net> Copyright (c) 2000 =head1 CONTRIBUTORS Various people have made helpful suggestions and contributions, in particular: Ronald J Kimball <rjk@linguist.dartmouth.edu> Hugo van der Sanden <hv@crypt0.demon.co.uk> Peter Scott <Peter@PSDT.com> perl5201delta.pod 0000644 00000025223 15125556335 0007552 0 ustar 00 =encoding utf8 =head1 NAME perl5201delta - what is new for perl v5.20.1 =head1 DESCRIPTION This document describes differences between the 5.20.0 release and the 5.20.1 release. If you are upgrading from an earlier release such as 5.18.0, first read L<perl5200delta>, which describes differences between 5.18.0 and 5.20.0. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.20.0. If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Performance Enhancements =over 4 =item * An optimization to avoid problems with COW and deliberately overallocated PVs has been disabled because it interfered with another, more important, optimization, causing a slowdown on some platforms. L<[perl #121975]|https://rt.perl.org/Ticket/Display.html?id=121975> =item * Returning a string from a lexical variable could be slow in some cases. This has now been fixed. L<[perl #121977]|https://rt.perl.org/Ticket/Display.html?id=121977> =back =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Config::Perl::V> has been upgraded from version 0.20 to 0.22. The list of Perl versions covered has been updated and some flaws in the parsing have been fixed. =item * L<Exporter> has been upgraded from version 5.70 to 5.71. Illegal POD syntax in the documentation has been corrected. =item * L<ExtUtils::CBuilder> has been upgraded from version 0.280216 to 0.280217. Android builds now link to both B<-lperl> and C<$Config::Config{perllibs}>. =item * L<File::Copy> has been upgraded from version 2.29 to 2.30. The documentation now notes that C<copy> will not overwrite read-only files. =item * L<Module::CoreList> has been upgraded from version 3.11 to 5.020001. The list of Perl versions covered has been updated. =item * The PathTools module collection has been upgraded from version 3.47 to 3.48. Fallbacks are now in place when cross-compiling for Android and C<$Config::Config{sh}> is not yet defined. L<[perl #121963]|https://rt.perl.org/Ticket/Display.html?id=121963> =item * L<PerlIO::via> has been upgraded from version 0.14 to 0.15. A minor portability improvement has been made to the XS implementation. =item * L<Unicode::UCD> has been upgraded from version 0.57 to 0.58. The documentation includes many clarifications and fixes. =item * L<utf8> has been upgraded from version 1.13 to 1.13_01. The documentation has some minor formatting improvements. =item * L<version> has been upgraded from version 0.9908 to 0.9909. External libraries and Perl may have different ideas of what the locale is. This is problematic when parsing version strings if the locale's numeric separator has been changed. Version parsing has been patched to ensure it handles the locales correctly. L<[perl #121930]|https://rt.perl.org/Ticket/Display.html?id=121930> =back =head1 Documentation =head2 Changes to Existing Documentation =head3 L<perlapi> =over 4 =item * C<av_len> - Emphasize that this returns the highest index in the array, not the size of the array. L<[perl #120386]|https://rt.perl.org/Ticket/Display.html?id=120386> =item * Note that C<SvSetSV> doesn't do set magic. =item * C<sv_usepvn_flags> - Fix documentation to mention the use of C<NewX> instead of C<malloc>. L<[perl #121869]|https://rt.perl.org/Ticket/Display.html?id=121869> =item * Clarify where C<NUL> may be embedded or is required to terminate a string. =back =head3 L<perlfunc> =over 4 =item * Clarify the meaning of C<-B> and C<-T>. =item * C<-l> now notes that it will return false if symlinks aren't supported by the file system. L<[perl #121523]|https://rt.perl.org/Ticket/Display.html?id=121523> =item * Note that C<each>, C<keys> and C<values> may produce different orderings for tied hashes compared to other perl hashes. L<[perl #121404]|https://rt.perl.org/Ticket/Display.html?id=121404> =item * Note that C<exec LIST> and C<system LIST> may fall back to the shell on Win32. Only C<exec PROGRAM LIST> and C<system PROGRAM LIST> indirect object syntax will reliably avoid using the shell. This has also been noted in L<perlport>. L<[perl #122046]|https://rt.perl.org/Ticket/Display.html?id=122046> =item * Clarify the meaning of C<our>. L<[perl #122132]|https://rt.perl.org/Ticket/Display.html?id=122132> =back =head3 L<perlguts> =over 4 =item * Explain various ways of modifying an existing SV's buffer. L<[perl #116925]|https://rt.perl.org/Ticket/Display.html?id=116925> =back =head3 L<perlpolicy> =over 4 =item * We now have a code of conduct for the I<< p5p >> mailing list, as documented in L<< perlpolicy/STANDARDS OF CONDUCT >>. =back =head3 L<perlre> =over 4 =item * The C</x> modifier has been clarified to note that comments cannot be continued onto the next line by escaping them. =back =head3 L<perlsyn> =over 4 =item * Mention the use of empty conditionals in C<for>/C<while> loops for infinite loops. =back =head3 L<perlxs> =over 4 =item * Added a discussion of locale issues in XS code. =back =head1 Diagnostics The following additions or changes have been made to diagnostic output, including warnings and fatal error messages. For the complete list of diagnostic messages, see L<perldiag>. =head2 Changes to Existing Diagnostics =over 4 =item * L<Variable length lookbehind not implemented in regex mE<sol>%sE<sol>|perldiag/"Variable length lookbehind not implemented in regex m/%s/"> Information about Unicode behaviour has been added. =back =head1 Configuration and Compilation =over 4 =item * Building Perl no longer writes to the source tree when configured with F<Configure>'s B<-Dmksymlinks> option. L<[perl #121585]|https://rt.perl.org/Ticket/Display.html?id=121585> =back =head1 Platform Support =head2 Platform-Specific Notes =over 4 =item Android Build support has been improved for cross-compiling in general and for Android in particular. =item OpenBSD Corrected architectures and version numbers used in configuration hints when building Perl. =item Solaris B<c99> options have been cleaned up, hints look for B<solstudio> as well as B<SUNWspro>, and support for native C<setenv> has been added. =item VMS An old bug in feature checking, mainly affecting pre-7.3 systems, has been fixed. =item Windows C<%I64d> is now being used instead of C<%lld> for MinGW. =back =head1 Internal Changes =over 4 =item * Added L<perlapi/sync_locale>. Changing the program's locale should be avoided by XS code. Nevertheless, certain non-Perl libraries called from XS, such as C<Gtk> do so. When this happens, Perl needs to be told that the locale has changed. Use this function to do so, before returning to Perl. =back =head1 Selected Bug Fixes =over 4 =item * A bug has been fixed where zero-length assertions and code blocks inside of a regex could cause C<pos> to see an incorrect value. L<[perl #122460]|https://rt.perl.org/Ticket/Display.html?id=122460> =item * Using C<s///e> on tainted utf8 strings could issue bogus "Malformed UTF-8 character (unexpected end of string)" warnings. This has now been fixed. L<[perl #122148]|https://rt.perl.org/Ticket/Display.html?id=122148> =item * C<system> and friends should now work properly on more Android builds. Due to an oversight, the value specified through B<-Dtargetsh> to F<Configure> would end up being ignored by some of the build process. This caused perls cross-compiled for Android to end up with defective versions of C<system>, C<exec> and backticks: the commands would end up looking for F</bin/sh> instead of F</system/bin/sh>, and so would fail for the vast majority of devices, leaving C<$!> as C<ENOENT>. =item * Many issues have been detected by L<Coverity|http://www.coverity.com/> and fixed. =back =head1 Acknowledgements Perl 5.20.1 represents approximately 4 months of development since Perl 5.20.0 and contains approximately 12,000 lines of changes across 170 files from 36 authors. Excluding auto-generated files, documentation and release tools, there were approximately 2,600 lines of changes to 110 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.20.1: Aaron Crane, Abigail, Alberto Simões, Alexandr Ciornii, Alexandre (Midnite) Jousset, Andrew Fresh, Andy Dougherty, Brian Fraser, Chris 'BinGOs' Williams, Craig A. Berry, Daniel Dragan, David Golden, David Mitchell, H.Merijn Brand, James E Keenan, Jan Dubois, Jarkko Hietaniemi, John Peacock, kafka, Karen Etheridge, Karl Williamson, Lukas Mai, Matthew Horsfall, Michael Bunk, Peter Martini, Rafael Garcia-Suarez, Reini Urban, Ricardo Signes, Shirakata Kentaro, Smylers, Steve Hay, Thomas Sibley, Todd Rinaldo, Tony Cook, Vladimir Marek, Yves Orton. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at https://rt.perl.org/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl5180delta.pod 0000644 00000351205 15125556335 0007562 0 ustar 00 =encoding utf8 =head1 NAME perl5180delta - what is new for perl v5.18.0 =head1 DESCRIPTION This document describes differences between the v5.16.0 release and the v5.18.0 release. If you are upgrading from an earlier release such as v5.14.0, first read L<perl5160delta>, which describes differences between v5.14.0 and v5.16.0. =head1 Core Enhancements =head2 New mechanism for experimental features Newly-added experimental features will now require this incantation: no warnings "experimental::feature_name"; use feature "feature_name"; # would warn without the prev line There is a new warnings category, called "experimental", containing warnings that the L<feature> pragma emits when enabling experimental features. Newly-added experimental features will also be given special warning IDs, which consist of "experimental::" followed by the name of the feature. (The plan is to extend this mechanism eventually to all warnings, to allow them to be enabled or disabled individually, and not just by category.) By saying no warnings "experimental::feature_name"; you are taking responsibility for any breakage that future changes to, or removal of, the feature may cause. Since some features (like C<~~> or C<my $_>) now emit experimental warnings, and you may want to disable them in code that is also run on perls that do not recognize these warning categories, consider using the C<if> pragma like this: no if $] >= 5.018, warnings => "experimental::feature_name"; Existing experimental features may begin emitting these warnings, too. Please consult L<perlexperiment> for information on which features are considered experimental. =head2 Hash overhaul Changes to the implementation of hashes in perl v5.18.0 will be one of the most visible changes to the behavior of existing code. By default, two distinct hash variables with identical keys and values may now provide their contents in a different order where it was previously identical. When encountering these changes, the key to cleaning up from them is to accept that B<hashes are unordered collections> and to act accordingly. =head3 Hash randomization The seed used by Perl's hash function is now random. This means that the order which keys/values will be returned from functions like C<keys()>, C<values()>, and C<each()> will differ from run to run. This change was introduced to make Perl's hashes more robust to algorithmic complexity attacks, and also because we discovered that it exposes hash ordering dependency bugs and makes them easier to track down. Toolchain maintainers might want to invest in additional infrastructure to test for things like this. Running tests several times in a row and then comparing results will make it easier to spot hash order dependencies in code. Authors are strongly encouraged not to expose the key order of Perl's hashes to insecure audiences. Further, every hash has its own iteration order, which should make it much more difficult to determine what the current hash seed is. =head3 New hash functions Perl v5.18 includes support for multiple hash functions, and changed the default (to ONE_AT_A_TIME_HARD), you can choose a different algorithm by defining a symbol at compile time. For a current list, consult the F<INSTALL> document. Note that as of Perl v5.18 we can only recommend use of the default or SIPHASH. All the others are known to have security issues and are for research purposes only. =head3 PERL_HASH_SEED environment variable now takes a hex value C<PERL_HASH_SEED> no longer accepts an integer as a parameter; instead the value is expected to be a binary value encoded in a hex string, such as "0xf5867c55039dc724". This is to make the infrastructure support hash seeds of arbitrary lengths, which might exceed that of an integer. (SipHash uses a 16 byte seed.) =head3 PERL_PERTURB_KEYS environment variable added The C<PERL_PERTURB_KEYS> environment variable allows one to control the level of randomization applied to C<keys> and friends. When C<PERL_PERTURB_KEYS> is 0, perl will not randomize the key order at all. The chance that C<keys> changes due to an insert will be the same as in previous perls, basically only when the bucket size is changed. When C<PERL_PERTURB_KEYS> is 1, perl will randomize keys in a non-repeatable way. The chance that C<keys> changes due to an insert will be very high. This is the most secure and default mode. When C<PERL_PERTURB_KEYS> is 2, perl will randomize keys in a repeatable way. Repeated runs of the same program should produce the same output every time. C<PERL_HASH_SEED> implies a non-default C<PERL_PERTURB_KEYS> setting. Setting C<PERL_HASH_SEED=0> (exactly one 0) implies C<PERL_PERTURB_KEYS=0> (hash key randomization disabled); setting C<PERL_HASH_SEED> to any other value implies C<PERL_PERTURB_KEYS=2> (deterministic and repeatable hash key randomization). Specifying C<PERL_PERTURB_KEYS> explicitly to a different level overrides this behavior. =head3 Hash::Util::hash_seed() now returns a string Hash::Util::hash_seed() now returns a string instead of an integer. This is to make the infrastructure support hash seeds of arbitrary lengths which might exceed that of an integer. (SipHash uses a 16 byte seed.) =head3 Output of PERL_HASH_SEED_DEBUG has been changed The environment variable PERL_HASH_SEED_DEBUG now makes perl show both the hash function perl was built with, I<and> the seed, in hex, in use for that process. Code parsing this output, should it exist, must change to accommodate the new format. Example of the new format: $ PERL_HASH_SEED_DEBUG=1 ./perl -e1 HASH_FUNCTION = MURMUR3 HASH_SEED = 0x1476bb9f =head2 Upgrade to Unicode 6.2 Perl now supports Unicode 6.2. A list of changes from Unicode 6.1 is at L<http://www.unicode.org/versions/Unicode6.2.0>. =head2 Character name aliases may now include non-Latin1-range characters It is possible to define your own names for characters for use in C<\N{...}>, C<charnames::vianame()>, etc. These names can now be comprised of characters from the whole Unicode range. This allows for names to be in your native language, and not just English. Certain restrictions apply to the characters that may be used (you can't define a name that has punctuation in it, for example). See L<charnames/CUSTOM ALIASES>. =head2 New DTrace probes The following new DTrace probes have been added: =over 4 =item * C<op-entry> =item * C<loading-file> =item * C<loaded-file> =back =head2 C<${^LAST_FH}> This new variable provides access to the filehandle that was last read. This is the handle used by C<$.> and by C<tell> and C<eof> without arguments. =head2 Regular Expression Set Operations This is an B<experimental> feature to allow matching against the union, intersection, etc., of sets of code points, similar to L<Unicode::Regex::Set>. It can also be used to extend C</x> processing to [bracketed] character classes, and as a replacement of user-defined properties, allowing more complex expressions than they do. See L<perlrecharclass/Extended Bracketed Character Classes>. =head2 Lexical subroutines This new feature is still considered B<experimental>. To enable it: use 5.018; no warnings "experimental::lexical_subs"; use feature "lexical_subs"; You can now declare subroutines with C<state sub foo>, C<my sub foo>, and C<our sub foo>. (C<state sub> requires that the "state" feature be enabled, unless you write it as C<CORE::state sub foo>.) C<state sub> creates a subroutine visible within the lexical scope in which it is declared. The subroutine is shared between calls to the outer sub. C<my sub> declares a lexical subroutine that is created each time the enclosing block is entered. C<state sub> is generally slightly faster than C<my sub>. C<our sub> declares a lexical alias to the package subroutine of the same name. For more information, see L<perlsub/Lexical Subroutines>. =head2 Computed Labels The loop controls C<next>, C<last> and C<redo>, and the special C<dump> operator, now allow arbitrary expressions to be used to compute labels at run time. Previously, any argument that was not a constant was treated as the empty string. =head2 More CORE:: subs Several more built-in functions have been added as subroutines to the CORE:: namespace - namely, those non-overridable keywords that can be implemented without custom parsers: C<defined>, C<delete>, C<exists>, C<glob>, C<pos>, C<prototype>, C<scalar>, C<split>, C<study>, and C<undef>. As some of these have prototypes, C<prototype('CORE::...')> has been changed to not make a distinction between overridable and non-overridable keywords. This is to make C<prototype('CORE::pos')> consistent with C<prototype(&CORE::pos)>. =head2 C<kill> with negative signal names C<kill> has always allowed a negative signal number, which kills the process group instead of a single process. It has also allowed signal names. But it did not behave consistently, because negative signal names were treated as 0. Now negative signals names like C<-INT> are supported and treated the same way as -2 [perl #112990]. =head1 Security =head2 See also: hash overhaul Some of the changes in the L<hash overhaul|/"Hash overhaul"> were made to enhance security. Please read that section. =head2 C<Storable> security warning in documentation The documentation for C<Storable> now includes a section which warns readers of the danger of accepting Storable documents from untrusted sources. The short version is that deserializing certain types of data can lead to loading modules and other code execution. This is documented behavior and wanted behavior, but this opens an attack vector for malicious entities. =head2 C<Locale::Maketext> allowed code injection via a malicious template If users could provide a translation string to Locale::Maketext, this could be used to invoke arbitrary Perl subroutines available in the current process. This has been fixed, but it is still possible to invoke any method provided by C<Locale::Maketext> itself or a subclass that you are using. One of these methods in turn will invoke the Perl core's C<sprintf> subroutine. In summary, allowing users to provide translation strings without auditing them is a bad idea. This vulnerability is documented in CVE-2012-6329. =head2 Avoid calling memset with a negative count Poorly written perl code that allows an attacker to specify the count to perl's C<x> string repeat operator can already cause a memory exhaustion denial-of-service attack. A flaw in versions of perl before v5.15.5 can escalate that into a heap buffer overrun; coupled with versions of glibc before 2.16, it possibly allows the execution of arbitrary code. The flaw addressed to this commit has been assigned identifier CVE-2012-5195 and was researched by Tim Brown. =head1 Incompatible Changes =head2 See also: hash overhaul Some of the changes in the L<hash overhaul|/"Hash overhaul"> are not fully compatible with previous versions of perl. Please read that section. =head2 An unknown character name in C<\N{...}> is now a syntax error Previously, it warned, and the Unicode REPLACEMENT CHARACTER was substituted. Unicode now recommends that this situation be a syntax error. Also, the previous behavior led to some confusing warnings and behaviors, and since the REPLACEMENT CHARACTER has no use other than as a stand-in for some unknown character, any code that has this problem is buggy. =head2 Formerly deprecated characters in C<\N{}> character name aliases are now errors. Since v5.12.0, it has been deprecated to use certain characters in user-defined C<\N{...}> character names. These now cause a syntax error. For example, it is now an error to begin a name with a digit, such as in my $undraftable = "\N{4F}"; # Syntax error! or to have commas anywhere in the name. See L<charnames/CUSTOM ALIASES>. =head2 C<\N{BELL}> now refers to U+1F514 instead of U+0007 Unicode 6.0 reused the name "BELL" for a different code point than it traditionally had meant. Since Perl v5.14, use of this name still referred to U+0007, but would raise a deprecation warning. Now, "BELL" refers to U+1F514, and the name for U+0007 is "ALERT". All the functions in L<charnames> have been correspondingly updated. =head2 New Restrictions in Multi-Character Case-Insensitive Matching in Regular Expression Bracketed Character Classes Unicode has now withdrawn their previous recommendation for regular expressions to automatically handle cases where a single character can match multiple characters case-insensitively, for example, the letter LATIN SMALL LETTER SHARP S and the sequence C<ss>. This is because it turns out to be impracticable to do this correctly in all circumstances. Because Perl has tried to do this as best it can, it will continue to do so. (We are considering an option to turn it off.) However, a new restriction is being added on such matches when they occur in [bracketed] character classes. People were specifying things such as C</[\0-\xff]/i>, and being surprised that it matches the two character sequence C<ss> (since LATIN SMALL LETTER SHARP S occurs in this range). This behavior is also inconsistent with using a property instead of a range: C<\p{Block=Latin1}> also includes LATIN SMALL LETTER SHARP S, but C</[\p{Block=Latin1}]/i> does not match C<ss>. The new rule is that for there to be a multi-character case-insensitive match within a bracketed character class, the character must be explicitly listed, and not as an end point of a range. This more closely obeys the Principle of Least Astonishment. See L<perlrecharclass/Bracketed Character Classes>. Note that a bug [perl #89774], now fixed as part of this change, prevented the previous behavior from working fully. =head2 Explicit rules for variable names and identifiers Due to an oversight, single character variable names in v5.16 were completely unrestricted. This opened the door to several kinds of insanity. As of v5.18, these now follow the rules of other identifiers, in addition to accepting characters that match the C<\p{POSIX_Punct}> property. There is no longer any difference in the parsing of identifiers specified by using braces versus without braces. For instance, perl used to allow C<${foo:bar}> (with a single colon) but not C<$foo:bar>. Now that both are handled by a single code path, they are both treated the same way: both are forbidden. Note that this change is about the range of permissible literal identifiers, not other expressions. =head2 Vertical tabs are now whitespace No one could recall why C<\s> didn't match C<\cK>, the vertical tab. Now it does. Given the extreme rarity of that character, very little breakage is expected. That said, here's what it means: C<\s> in a regex now matches a vertical tab in all circumstances. Literal vertical tabs in a regex literal are ignored when the C</x> modifier is used. Leading vertical tabs, alone or mixed with other whitespace, are now ignored when interpreting a string as a number. For example: $dec = " \cK \t 123"; $hex = " \cK \t 0xF"; say 0 + $dec; # was 0 with warning, now 123 say int $dec; # was 0, now 123 say oct $hex; # was 0, now 15 =head2 C</(?{})/> and C</(??{})/> have been heavily reworked The implementation of this feature has been almost completely rewritten. Although its main intent is to fix bugs, some behaviors, especially related to the scope of lexical variables, will have changed. This is described more fully in the L</Selected Bug Fixes> section. =head2 Stricter parsing of substitution replacement It is no longer possible to abuse the way the parser parses C<s///e> like this: %_=(_,"Just another "); $_="Perl hacker,\n"; s//_}->{_/e;print =head2 C<given> now aliases the global C<$_> Instead of assigning to an implicit lexical C<$_>, C<given> now makes the global C<$_> an alias for its argument, just like C<foreach>. However, it still uses lexical C<$_> if there is lexical C<$_> in scope (again, just like C<foreach>) [perl #114020]. =head2 The smartmatch family of features are now experimental Smart match, added in v5.10.0 and significantly revised in v5.10.1, has been a regular point of complaint. Although there are a number of ways in which it is useful, it has also proven problematic and confusing for both users and implementors of Perl. There have been a number of proposals on how to best address the problem. It is clear that smartmatch is almost certainly either going to change or go away in the future. Relying on its current behavior is not recommended. Warnings will now be issued when the parser sees C<~~>, C<given>, or C<when>. To disable these warnings, you can add this line to the appropriate scope: no if $] >= 5.018, warnings => "experimental::smartmatch"; Consider, though, replacing the use of these features, as they may change behavior again before becoming stable. =head2 Lexical C<$_> is now experimental Since it was introduced in Perl v5.10, it has caused much confusion with no obvious solution: =over =item * Various modules (e.g., List::Util) expect callback routines to use the global C<$_>. C<use List::Util 'first'; my $_; first { $_ == 1 } @list> does not work as one would expect. =item * A C<my $_> declaration earlier in the same file can cause confusing closure warnings. =item * The "_" subroutine prototype character allows called subroutines to access your lexical C<$_>, so it is not really private after all. =item * Nevertheless, subroutines with a "(@)" prototype and methods cannot access the caller's lexical C<$_>, unless they are written in XS. =item * But even XS routines cannot access a lexical C<$_> declared, not in the calling subroutine, but in an outer scope, iff that subroutine happened not to mention C<$_> or use any operators that default to C<$_>. =back It is our hope that lexical C<$_> can be rehabilitated, but this may cause changes in its behavior. Please use it with caution until it becomes stable. =head2 readline() with C<$/ = \N> now reads N characters, not N bytes Previously, when reading from a stream with I/O layers such as C<encoding>, the readline() function, otherwise known as the C<< <> >> operator, would read I<N> bytes from the top-most layer. [perl #79960] Now, I<N> characters are read instead. There is no change in behaviour when reading from streams with no extra layers, since bytes map exactly to characters. =head2 Overridden C<glob> is now passed one argument C<glob> overrides used to be passed a magical undocumented second argument that identified the caller. Nothing on CPAN was using this, and it got in the way of a bug fix, so it was removed. If you really need to identify the caller, see L<Devel::Callsite> on CPAN. =head2 Here doc parsing The body of a here document inside a quote-like operator now always begins on the line after the "<<foo" marker. Previously, it was documented to begin on the line following the containing quote-like operator, but that was only sometimes the case [perl #114040]. =head2 Alphanumeric operators must now be separated from the closing delimiter of regular expressions You may no longer write something like: m/a/and 1 Instead you must write m/a/ and 1 with whitespace separating the operator from the closing delimiter of the regular expression. Not having whitespace has resulted in a deprecation warning since Perl v5.14.0. =head2 qw(...) can no longer be used as parentheses C<qw> lists used to fool the parser into thinking they were always surrounded by parentheses. This permitted some surprising constructions such as C<foreach $x qw(a b c) {...}>, which should really be written C<foreach $x (qw(a b c)) {...}>. These would sometimes get the lexer into the wrong state, so they didn't fully work, and the similar C<foreach qw(a b c) {...}> that one might expect to be permitted never worked at all. This side effect of C<qw> has now been abolished. It has been deprecated since Perl v5.13.11. It is now necessary to use real parentheses everywhere that the grammar calls for them. =head2 Interaction of lexical and default warnings Turning on any lexical warnings used first to disable all default warnings if lexical warnings were not already enabled: $*; # deprecation warning use warnings "void"; $#; # void warning; no deprecation warning Now, the C<debugging>, C<deprecated>, C<glob>, C<inplace> and C<malloc> warnings categories are left on when turning on lexical warnings (unless they are turned off by C<no warnings>, of course). This may cause deprecation warnings to occur in code that used to be free of warnings. Those are the only categories consisting only of default warnings. Default warnings in other categories are still disabled by C<< use warnings "category" >>, as we do not yet have the infrastructure for controlling individual warnings. =head2 C<state sub> and C<our sub> Due to an accident of history, C<state sub> and C<our sub> were equivalent to a plain C<sub>, so one could even create an anonymous sub with C<our sub { ... }>. These are now disallowed outside of the "lexical_subs" feature. Under the "lexical_subs" feature they have new meanings described in L<perlsub/Lexical Subroutines>. =head2 Defined values stored in environment are forced to byte strings A value stored in an environment variable has always been stringified when inherited by child processes. In this release, when assigning to C<%ENV>, values are immediately stringified, and converted to be only a byte string. First, it is forced to be only a string. Then if the string is utf8 and the equivalent of C<utf8::downgrade()> works, that result is used; otherwise, the equivalent of C<utf8::encode()> is used, and a warning is issued about wide characters (L</Diagnostics>). =head2 C<require> dies for unreadable files When C<require> encounters an unreadable file, it now dies. It used to ignore the file and continue searching the directories in C<@INC> [perl #113422]. =head2 C<gv_fetchmeth_*> and SUPER The various C<gv_fetchmeth_*> XS functions used to treat a package whose named ended with C<::SUPER> specially. A method lookup on the C<Foo::SUPER> package would be treated as a C<SUPER> method lookup on the C<Foo> package. This is no longer the case. To do a C<SUPER> lookup, pass the C<Foo> stash and the C<GV_SUPER> flag. =head2 C<split>'s first argument is more consistently interpreted After some changes earlier in v5.17, C<split>'s behavior has been simplified: if the PATTERN argument evaluates to a string containing one space, it is treated the way that a I<literal> string containing one space once was. =head1 Deprecations =head2 Module removals The following modules will be removed from the core distribution in a future release, and will at that time need to be installed from CPAN. Distributions on CPAN which require these modules will need to list them as prerequisites. The core versions of these modules will now issue C<"deprecated">-category warnings to alert you to this fact. To silence these deprecation warnings, install the modules in question from CPAN. Note that these are (with rare exceptions) fine modules that you are encouraged to continue to use. Their disinclusion from core primarily hinges on their necessity to bootstrapping a fully functional, CPAN-capable Perl installation, not usually on concerns over their design. =over =item L<encoding> The use of this pragma is now strongly discouraged. It conflates the encoding of source text with the encoding of I/O data, reinterprets escape sequences in source text (a questionable choice), and introduces the UTF-8 bug to all runtime handling of character strings. It is broken as designed and beyond repair. For using non-ASCII literal characters in source text, please refer to L<utf8>. For dealing with textual I/O data, please refer to L<Encode> and L<open>. =item L<Archive::Extract> =item L<B::Lint> =item L<B::Lint::Debug> =item L<CPANPLUS> and all included C<CPANPLUS::*> modules =item L<Devel::InnerPackage> =item L<Log::Message> =item L<Log::Message::Config> =item L<Log::Message::Handlers> =item L<Log::Message::Item> =item L<Log::Message::Simple> =item L<Module::Pluggable> =item L<Module::Pluggable::Object> =item L<Object::Accessor> =item L<Pod::LaTeX> =item L<Term::UI> =item L<Term::UI::History> =back =head2 Deprecated Utilities The following utilities will be removed from the core distribution in a future release as their associated modules have been deprecated. They will remain available with the applicable CPAN distribution. =over =item L<cpanp> =item C<cpanp-run-perl> =item L<cpan2dist> These items are part of the C<CPANPLUS> distribution. =item L<pod2latex> This item is part of the C<Pod::LaTeX> distribution. =back =head2 PL_sv_objcount This interpreter-global variable used to track the total number of Perl objects in the interpreter. It is no longer maintained and will be removed altogether in Perl v5.20. =head2 Five additional characters should be escaped in patterns with C</x> When a regular expression pattern is compiled with C</x>, Perl treats 6 characters as white space to ignore, such as SPACE and TAB. However, Unicode recommends 11 characters be treated thusly. We will conform with this in a future Perl version. In the meantime, use of any of the missing characters will raise a deprecation warning, unless turned off. The five characters are: U+0085 NEXT LINE U+200E LEFT-TO-RIGHT MARK U+200F RIGHT-TO-LEFT MARK U+2028 LINE SEPARATOR U+2029 PARAGRAPH SEPARATOR =head2 User-defined charnames with surprising whitespace A user-defined character name with trailing or multiple spaces in a row is likely a typo. This now generates a warning when defined, on the assumption that uses of it will be unlikely to include the excess whitespace. =head2 Various XS-callable functions are now deprecated All the functions used to classify characters will be removed from a future version of Perl, and should not be used. With participating C compilers (e.g., gcc), compiling any file that uses any of these will generate a warning. These were not intended for public use; there are equivalent, faster, macros for most of them. See L<perlapi/Character classes>. The complete list is: C<is_uni_alnum>, C<is_uni_alnumc>, C<is_uni_alnumc_lc>, C<is_uni_alnum_lc>, C<is_uni_alpha>, C<is_uni_alpha_lc>, C<is_uni_ascii>, C<is_uni_ascii_lc>, C<is_uni_blank>, C<is_uni_blank_lc>, C<is_uni_cntrl>, C<is_uni_cntrl_lc>, C<is_uni_digit>, C<is_uni_digit_lc>, C<is_uni_graph>, C<is_uni_graph_lc>, C<is_uni_idfirst>, C<is_uni_idfirst_lc>, C<is_uni_lower>, C<is_uni_lower_lc>, C<is_uni_print>, C<is_uni_print_lc>, C<is_uni_punct>, C<is_uni_punct_lc>, C<is_uni_space>, C<is_uni_space_lc>, C<is_uni_upper>, C<is_uni_upper_lc>, C<is_uni_xdigit>, C<is_uni_xdigit_lc>, C<is_utf8_alnum>, C<is_utf8_alnumc>, C<is_utf8_alpha>, C<is_utf8_ascii>, C<is_utf8_blank>, C<is_utf8_char>, C<is_utf8_cntrl>, C<is_utf8_digit>, C<is_utf8_graph>, C<is_utf8_idcont>, C<is_utf8_idfirst>, C<is_utf8_lower>, C<is_utf8_mark>, C<is_utf8_perl_space>, C<is_utf8_perl_word>, C<is_utf8_posix_digit>, C<is_utf8_print>, C<is_utf8_punct>, C<is_utf8_space>, C<is_utf8_upper>, C<is_utf8_xdigit>, C<is_utf8_xidcont>, C<is_utf8_xidfirst>. In addition these three functions that have never worked properly are deprecated: C<to_uni_lower_lc>, C<to_uni_title_lc>, and C<to_uni_upper_lc>. =head2 Certain rare uses of backslashes within regexes are now deprecated There are three pairs of characters that Perl recognizes as metacharacters in regular expression patterns: C<{}>, C<[]>, and C<()>. These can be used as well to delimit patterns, as in: m{foo} s(foo)(bar) Since they are metacharacters, they have special meaning to regular expression patterns, and it turns out that you can't turn off that special meaning by the normal means of preceding them with a backslash, if you use them, paired, within a pattern delimited by them. For example, in m{foo\{1,3\}} the backslashes do not change the behavior, and this matches S<C<"f o">> followed by one to three more occurrences of C<"o">. Usages like this, where they are interpreted as metacharacters, are exceedingly rare; we think there are none, for example, in all of CPAN. Hence, this deprecation should affect very little code. It does give notice, however, that any such code needs to change, which will in turn allow us to change the behavior in future Perl versions so that the backslashes do have an effect, and without fear that we are silently breaking any existing code. =head2 Splitting the tokens C<(?> and C<(*> in regular expressions A deprecation warning is now raised if the C<(> and C<?> are separated by white space or comments in C<(?...)> regular expression constructs. Similarly, if the C<(> and C<*> are separated in C<(*VERB...)> constructs. =head2 Pre-PerlIO IO implementations In theory, you can currently build perl without PerlIO. Instead, you'd use a wrapper around stdio or sfio. In practice, this isn't very useful. It's not well tested, and without any support for IO layers or (thus) Unicode, it's not much of a perl. Building without PerlIO will most likely be removed in the next version of perl. PerlIO supports a C<stdio> layer if stdio use is desired. Similarly a sfio layer could be produced in the future, if needed. =head1 Future Deprecations =over =item * Platforms without support infrastructure Both Windows CE and z/OS have been historically under-maintained, and are currently neither successfully building nor regularly being smoke tested. Efforts are underway to change this situation, but it should not be taken for granted that the platforms are safe and supported. If they do not become buildable and regularly smoked, support for them may be actively removed in future releases. If you have an interest in these platforms and you can lend your time, expertise, or hardware to help support these platforms, please let the perl development effort know by emailing C<perl5-porters@perl.org>. Some platforms that appear otherwise entirely dead are also on the short list for removal between now and v5.20.0: =over =item DG/UX =item NeXT =back We also think it likely that current versions of Perl will no longer build AmigaOS, DJGPP, NetWare (natively), OS/2 and Plan 9. If you are using Perl on such a platform and have an interest in ensuring Perl's future on them, please contact us. We believe that Perl has long been unable to build on mixed endian architectures (such as PDP-11s), and intend to remove any remaining support code. Similarly, code supporting the long umaintained GNU dld will be removed soon if no-one makes themselves known as an active user. =item * Swapping of $< and $> Perl has supported the idiom of swapping $< and $> (and likewise $( and $)) to temporarily drop permissions since 5.0, like this: ($<, $>) = ($>, $<); However, this idiom modifies the real user/group id, which can have undesirable side-effects, is no longer useful on any platform perl supports and complicates the implementation of these variables and list assignment in general. As an alternative, assignment only to C<< $> >> is recommended: local $> = $<; See also: L<Setuid Demystified|http://www.cs.berkeley.edu/~daw/papers/setuid-usenix02.pdf>. =item * C<microperl>, long broken and of unclear present purpose, will be removed. =item * Revamping C<< "\Q" >> semantics in double-quotish strings when combined with other escapes. There are several bugs and inconsistencies involving combinations of C<\Q> and escapes like C<\x>, C<\L>, etc., within a C<\Q...\E> pair. These need to be fixed, and doing so will necessarily change current behavior. The changes have not yet been settled. =item * Use of C<$x>, where C<x> stands for any actual (non-printing) C0 control character will be disallowed in a future Perl version. Use C<${x}> instead (where again C<x> stands for a control character), or better, C<$^A> , where C<^> is a caret (CIRCUMFLEX ACCENT), and C<A> stands for any of the characters listed at the end of L<perlebcdic/OPERATOR DIFFERENCES>. =back =head1 Performance Enhancements =over 4 =item * Lists of lexical variable declarations (C<my($x, $y)>) are now optimised down to a single op and are hence faster than before. =item * A new C preprocessor define C<NO_TAINT_SUPPORT> was added that, if set, disables Perl's taint support altogether. Using the -T or -t command line flags will cause a fatal error. Beware that both core tests as well as many a CPAN distribution's tests will fail with this change. On the upside, it provides a small performance benefit due to reduced branching. B<Do not enable this unless you know exactly what you are getting yourself into.> =item * C<pack> with constant arguments is now constant folded in most cases [perl #113470]. =item * Speed up in regular expression matching against Unicode properties. The largest gain is for C<\X>, the Unicode "extended grapheme cluster." The gain for it is about 35% - 40%. Bracketed character classes, e.g., C<[0-9\x{100}]> containing code points above 255 are also now faster. =item * On platforms supporting it, several former macros are now implemented as static inline functions. This should speed things up slightly on non-GCC platforms. =item * The optimisation of hashes in boolean context has been extended to affect C<scalar(%hash)>, C<%hash ? ... : ...>, and C<sub { %hash || ... }>. =item * Filetest operators manage the stack in a fractionally more efficient manner. =item * Globs used in a numeric context are now numified directly in most cases, rather than being numified via stringification. =item * The C<x> repetition operator is now folded to a single constant at compile time if called in scalar context with constant operands and no parentheses around the left operand. =back =head1 Modules and Pragmata =head2 New Modules and Pragmata =over 4 =item * L<Config::Perl::V> version 0.16 has been added as a dual-lifed module. It provides structured data retrieval of C<perl -V> output including information only known to the C<perl> binary and not available via L<Config>. =back =head2 Updated Modules and Pragmata For a complete list of updates, run: $ corelist --diff 5.16.0 5.18.0 You can substitute your favorite version in place of C<5.16.0>, too. =over =item * L<Archive::Extract> has been upgraded to 0.68. Work around an edge case on Linux with Busybox's unzip. =item * L<Archive::Tar> has been upgraded to 1.90. ptar now supports the -T option as well as dashless options [rt.cpan.org #75473], [rt.cpan.org #75475]. Auto-encode filenames marked as UTF-8 [rt.cpan.org #75474]. Don't use C<tell> on L<IO::Zlib> handles [rt.cpan.org #64339]. Don't try to C<chown> on symlinks. =item * L<autodie> has been upgraded to 2.13. C<autodie> now plays nicely with the 'open' pragma. =item * L<B> has been upgraded to 1.42. The C<stashoff> method of COPs has been added. This provides access to an internal field added in perl 5.16 under threaded builds [perl #113034]. C<B::COP::stashpv> now supports UTF-8 package names and embedded NULs. All C<CVf_*> and C<GVf_*> and more SV-related flag values are now provided as constants in the C<B::> namespace and available for export. The default export list has not changed. This makes the module work with the new pad API. =item * L<B::Concise> has been upgraded to 0.95. The C<-nobanner> option has been fixed, and C<format>s can now be dumped. When passed a sub name to dump, it will check also to see whether it is the name of a format. If a sub and a format share the same name, it will dump both. This adds support for the new C<OpMAYBE_TRUEBOOL> and C<OPpTRUEBOOL> flags. =item * L<B::Debug> has been upgraded to 1.18. This adds support (experimentally) for C<B::PADLIST>, which was added in Perl 5.17.4. =item * L<B::Deparse> has been upgraded to 1.20. Avoid warning when run under C<perl -w>. It now deparses loop controls with the correct precedence, and multiple statements in a C<format> line are also now deparsed correctly. This release suppresses trailing semicolons in formats. This release adds stub deparsing for lexical subroutines. It no longer dies when deparsing C<sort> without arguments. It now correctly omits the comma for C<system $prog @args> and C<exec $prog @args>. =item * L<bignum>, L<bigint> and L<bigrat> have been upgraded to 0.33. The overrides for C<hex> and C<oct> have been rewritten, eliminating several problems, and making one incompatible change: =over =item * Formerly, whichever of C<use bigint> or C<use bigrat> was compiled later would take precedence over the other, causing C<hex> and C<oct> not to respect the other pragma when in scope. =item * Using any of these three pragmata would cause C<hex> and C<oct> anywhere else in the program to evaluate their arguments in list context and prevent them from inferring $_ when called without arguments. =item * Using any of these three pragmata would make C<oct("1234")> return 1234 (for any number not beginning with 0) anywhere in the program. Now "1234" is translated from octal to decimal, whether within the pragma's scope or not. =item * The global overrides that facilitate lexical use of C<hex> and C<oct> now respect any existing overrides that were in place before the new overrides were installed, falling back to them outside of the scope of C<use bignum>. =item * C<use bignum "hex">, C<use bignum "oct"> and similar invocations for bigint and bigrat now export a C<hex> or C<oct> function, instead of providing a global override. =back =item * L<Carp> has been upgraded to 1.29. Carp is no longer confused when C<caller> returns undef for a package that has been deleted. The C<longmess()> and C<shortmess()> functions are now documented. =item * L<CGI> has been upgraded to 3.63. Unrecognized HTML escape sequences are now handled better, problematic trailing newlines are no longer inserted after E<lt>formE<gt> tags by C<startform()> or C<start_form()>, and bogus "Insecure Dependency" warnings appearing with some versions of perl are now worked around. =item * L<Class::Struct> has been upgraded to 0.64. The constructor now respects overridden accessor methods [perl #29230]. =item * L<Compress::Raw::Bzip2> has been upgraded to 2.060. The misuse of Perl's "magic" API has been fixed. =item * L<Compress::Raw::Zlib> has been upgraded to 2.060. Upgrade bundled zlib to version 1.2.7. Fix build failures on Irix, Solaris, and Win32, and also when building as C++ [rt.cpan.org #69985], [rt.cpan.org #77030], [rt.cpan.org #75222]. The misuse of Perl's "magic" API has been fixed. C<compress()>, C<uncompress()>, C<memGzip()> and C<memGunzip()> have been speeded up by making parameter validation more efficient. =item * L<CPAN::Meta::Requirements> has been upgraded to 2.122. Treat undef requirements to C<from_string_hash> as 0 (with a warning). Added C<requirements_for_module> method. =item * L<CPANPLUS> has been upgraded to 0.9135. Allow adding F<blib/script> to PATH. Save the history between invocations of the shell. Handle multiple C<makemakerargs> and C<makeflags> arguments better. This resolves issues with the SQLite source engine. =item * L<Data::Dumper> has been upgraded to 2.145. It has been optimized to only build a seen-scalar hash as necessary, thereby speeding up serialization drastically. Additional tests were added in order to improve statement, branch, condition and subroutine coverage. On the basis of the coverage analysis, some of the internals of Dumper.pm were refactored. Almost all methods are now documented. =item * L<DB_File> has been upgraded to 1.827. The main Perl module no longer uses the C<"@_"> construct. =item * L<Devel::Peek> has been upgraded to 1.11. This fixes compilation with C++ compilers and makes the module work with the new pad API. =item * L<Digest::MD5> has been upgraded to 2.52. Fix C<Digest::Perl::MD5> OO fallback [rt.cpan.org #66634]. =item * L<Digest::SHA> has been upgraded to 5.84. This fixes a double-free bug, which might have caused vulnerabilities in some cases. =item * L<DynaLoader> has been upgraded to 1.18. This is due to a minor code change in the XS for the VMS implementation. This fixes warnings about using C<CODE> sections without an C<OUTPUT> section. =item * L<Encode> has been upgraded to 2.49. The Mac alias x-mac-ce has been added, and various bugs have been fixed in Encode::Unicode, Encode::UTF7 and Encode::GSM0338. =item * L<Env> has been upgraded to 1.04. Its SPLICE implementation no longer misbehaves in list context. =item * L<ExtUtils::CBuilder> has been upgraded to 0.280210. Manifest files are now correctly embedded for those versions of VC++ which make use of them. [perl #111782, #111798]. A list of symbols to export can now be passed to C<link()> when on Windows, as on other OSes [perl #115100]. =item * L<ExtUtils::ParseXS> has been upgraded to 3.18. The generated C code now avoids unnecessarily incrementing C<PL_amagic_generation> on Perl versions where it's done automatically (or on current Perl where the variable no longer exists). This avoids a bogus warning for initialised XSUB non-parameters [perl #112776]. =item * L<File::Copy> has been upgraded to 2.26. C<copy()> no longer zeros files when copying into the same directory, and also now fails (as it has long been documented to do) when attempting to copy a file over itself. =item * L<File::DosGlob> has been upgraded to 1.10. The internal cache of file names that it keeps for each caller is now freed when that caller is freed. This means C<< use File::DosGlob 'glob'; eval 'scalar <*>' >> no longer leaks memory. =item * L<File::Fetch> has been upgraded to 0.38. Added the 'file_default' option for URLs that do not have a file component. Use C<File::HomeDir> when available, and provide C<PERL5_CPANPLUS_HOME> to override the autodetection. Always re-fetch F<CHECKSUMS> if C<fetchdir> is set. =item * L<File::Find> has been upgraded to 1.23. This fixes inconsistent unixy path handling on VMS. Individual files may now appear in list of directories to be searched [perl #59750]. =item * L<File::Glob> has been upgraded to 1.20. File::Glob has had exactly the same fix as File::DosGlob. Since it is what Perl's own C<glob> operator itself uses (except on VMS), this means C<< eval 'scalar <*>' >> no longer leaks. A space-separated list of patterns return long lists of results no longer results in memory corruption or crashes. This bug was introduced in Perl 5.16.0. [perl #114984] =item * L<File::Spec::Unix> has been upgraded to 3.40. C<abs2rel> could produce incorrect results when given two relative paths or the root directory twice [perl #111510]. =item * L<File::stat> has been upgraded to 1.07. C<File::stat> ignores the L<filetest> pragma, and warns when used in combination therewith. But it was not warning for C<-r>. This has been fixed [perl #111640]. C<-p> now works, and does not return false for pipes [perl #111638]. Previously C<File::stat>'s overloaded C<-x> and C<-X> operators did not give the correct results for directories or executable files when running as root. They had been treating executable permissions for root just like for any other user, performing group membership tests I<etc> for files not owned by root. They now follow the correct Unix behaviour - for a directory they are always true, and for a file if any of the three execute permission bits are set then they report that root can execute the file. Perl's builtin C<-x> and C<-X> operators have always been correct. =item * L<File::Temp> has been upgraded to 0.23 Fixes various bugs involving directory removal. Defers unlinking tempfiles if the initial unlink fails, which fixes problems on NFS. =item * L<GDBM_File> has been upgraded to 1.15. The undocumented optional fifth parameter to C<TIEHASH> has been removed. This was intended to provide control of the callback used by C<gdbm*> functions in case of fatal errors (such as filesystem problems), but did not work (and could never have worked). No code on CPAN even attempted to use it. The callback is now always the previous default, C<croak>. Problems on some platforms with how the C<C> C<croak> function is called have also been resolved. =item * L<Hash::Util> has been upgraded to 0.15. C<hash_unlocked> and C<hashref_unlocked> now returns true if the hash is unlocked, instead of always returning false [perl #112126]. C<hash_unlocked>, C<hashref_unlocked>, C<lock_hash_recurse> and C<unlock_hash_recurse> are now exportable [perl #112126]. Two new functions, C<hash_locked> and C<hashref_locked>, have been added. Oddly enough, these two functions were already exported, even though they did not exist [perl #112126]. =item * L<HTTP::Tiny> has been upgraded to 0.025. Add SSL verification features [github #6], [github #9]. Include the final URL in the response hashref. Add C<local_address> option. This improves SSL support. =item * L<IO> has been upgraded to 1.28. C<sync()> can now be called on read-only file handles [perl #64772]. L<IO::Socket> tries harder to cache or otherwise fetch socket information. =item * L<IPC::Cmd> has been upgraded to 0.80. Use C<POSIX::_exit> instead of C<exit> in C<run_forked> [rt.cpan.org #76901]. =item * L<IPC::Open3> has been upgraded to 1.13. The C<open3()> function no longer uses C<POSIX::close()> to close file descriptors since that breaks the ref-counting of file descriptors done by PerlIO in cases where the file descriptors are shared by PerlIO streams, leading to attempts to close the file descriptors a second time when any such PerlIO streams are closed later on. =item * L<Locale::Codes> has been upgraded to 3.25. It includes some new codes. =item * L<Memoize> has been upgraded to 1.03. Fix the C<MERGE> cache option. =item * L<Module::Build> has been upgraded to 0.4003. Fixed bug where modules without C<$VERSION> might have a version of '0' listed in 'provides' metadata, which will be rejected by PAUSE. Fixed bug in PodParser to allow numerals in module names. Fixed bug where giving arguments twice led to them becoming arrays, resulting in install paths like F<ARRAY(0xdeadbeef)/lib/Foo.pm>. A minor bug fix allows markup to be used around the leading "Name" in a POD "abstract" line, and some documentation improvements have been made. =item * L<Module::CoreList> has been upgraded to 2.90 Version information is now stored as a delta, which greatly reduces the size of the F<CoreList.pm> file. This restores compatibility with older versions of perl and cleans up the corelist data for various modules. =item * L<Module::Load::Conditional> has been upgraded to 0.54. Fix use of C<requires> on perls installed to a path with spaces. Various enhancements include the new use of Module::Metadata. =item * L<Module::Metadata> has been upgraded to 1.000011. The creation of a Module::Metadata object for a typical module file has been sped up by about 40%, and some spurious warnings about C<$VERSION>s have been suppressed. =item * L<Module::Pluggable> has been upgraded to 4.7. Amongst other changes, triggers are now allowed on events, which gives a powerful way to modify behaviour. =item * L<Net::Ping> has been upgraded to 2.41. This fixes some test failures on Windows. =item * L<Opcode> has been upgraded to 1.25. Reflect the removal of the boolkeys opcode and the addition of the clonecv, introcv and padcv opcodes. =item * L<overload> has been upgraded to 1.22. C<no overload> now warns for invalid arguments, just like C<use overload>. =item * L<PerlIO::encoding> has been upgraded to 0.16. This is the module implementing the ":encoding(...)" I/O layer. It no longer corrupts memory or crashes when the encoding back-end reallocates the buffer or gives it a typeglob or shared hash key scalar. =item * L<PerlIO::scalar> has been upgraded to 0.16. The buffer scalar supplied may now only contain code points 0xFF or lower. [perl #109828] =item * L<Perl::OSType> has been upgraded to 1.003. This fixes a bug detecting the VOS operating system. =item * L<Pod::Html> has been upgraded to 1.18. The option C<--libpods> has been reinstated. It is deprecated, and its use does nothing other than issue a warning that it is no longer supported. Since the HTML files generated by pod2html claim to have a UTF-8 charset, actually write the files out using UTF-8 [perl #111446]. =item * L<Pod::Simple> has been upgraded to 3.28. Numerous improvements have been made, mostly to Pod::Simple::XHTML, which also has a compatibility change: the C<codes_in_verbatim> option is now disabled by default. See F<cpan/Pod-Simple/ChangeLog> for the full details. =item * L<re> has been upgraded to 0.23 Single character [class]es like C</[s]/> or C</[s]/i> are now optimized as if they did not have the brackets, i.e. C</s/> or C</s/i>. See note about C<op_comp> in the L</Internal Changes> section below. =item * L<Safe> has been upgraded to 2.35. Fix interactions with C<Devel::Cover>. Don't eval code under C<no strict>. =item * L<Scalar::Util> has been upgraded to version 1.27. Fix an overloading issue with C<sum>. C<first> and C<reduce> now check the callback first (so C<&first(1)> is disallowed). Fix C<tainted> on magical values [rt.cpan.org #55763]. Fix C<sum> on previously magical values [rt.cpan.org #61118]. Fix reading past the end of a fixed buffer [rt.cpan.org #72700]. =item * L<Search::Dict> has been upgraded to 1.07. No longer require C<stat> on filehandles. Use C<fc> for casefolding. =item * L<Socket> has been upgraded to 2.009. Constants and functions required for IP multicast source group membership have been added. C<unpack_sockaddr_in()> and C<unpack_sockaddr_in6()> now return just the IP address in scalar context, and C<inet_ntop()> now guards against incorrect length scalars being passed in. This fixes an uninitialized memory read. =item * L<Storable> has been upgraded to 2.41. Modifying C<$_[0]> within C<STORABLE_freeze> no longer results in crashes [perl #112358]. An object whose class implements C<STORABLE_attach> is now thawed only once when there are multiple references to it in the structure being thawed [perl #111918]. Restricted hashes were not always thawed correctly [perl #73972]. Storable would croak when freezing a blessed REF object with a C<STORABLE_freeze()> method [perl #113880]. It can now freeze and thaw vstrings correctly. This causes a slight incompatible change in the storage format, so the format version has increased to 2.9. This contains various bugfixes, including compatibility fixes for older versions of Perl and vstring handling. =item * L<Sys::Syslog> has been upgraded to 0.32. This contains several bug fixes relating to C<getservbyname()>, C<setlogsock()>and log levels in C<syslog()>, together with fixes for Windows, Haiku-OS and GNU/kFreeBSD. See F<cpan/Sys-Syslog/Changes> for the full details. =item * L<Term::ANSIColor> has been upgraded to 4.02. Add support for italics. Improve error handling. =item * L<Term::ReadLine> has been upgraded to 1.10. This fixes the use of the B<cpan> and B<cpanp> shells on Windows in the event that the current drive happens to contain a F<\dev\tty> file. =item * L<Test::Harness> has been upgraded to 3.26. Fix glob semantics on Win32 [rt.cpan.org #49732]. Don't use C<Win32::GetShortPathName> when calling perl [rt.cpan.org #47890]. Ignore -T when reading shebang [rt.cpan.org #64404]. Handle the case where we don't know the wait status of the test more gracefully. Make the test summary 'ok' line overridable so that it can be changed to a plugin to make the output of prove idempotent. Don't run world-writable files. =item * L<Text::Tabs> and L<Text::Wrap> have been upgraded to 2012.0818. Support for Unicode combining characters has been added to them both. =item * L<threads::shared> has been upgraded to 1.31. This adds the option to warn about or ignore attempts to clone structures that can't be cloned, as opposed to just unconditionally dying in that case. This adds support for dual-valued values as created by L<Scalar::Util::dualvar|Scalar::Util/"dualvar NUM, STRING">. =item * L<Tie::StdHandle> has been upgraded to 4.3. C<READ> now respects the offset argument to C<read> [perl #112826]. =item * L<Time::Local> has been upgraded to 1.2300. Seconds values greater than 59 but less than 60 no longer cause C<timegm()> and C<timelocal()> to croak. =item * L<Unicode::UCD> has been upgraded to 0.53. This adds a function L<all_casefolds()|Unicode::UCD/all_casefolds()> that returns all the casefolds. =item * L<Win32> has been upgraded to 0.47. New APIs have been added for getting and setting the current code page. =back =head2 Removed Modules and Pragmata =over =item * L<Version::Requirements> has been removed from the core distribution. It is available under a different name: L<CPAN::Meta::Requirements>. =back =head1 Documentation =head2 Changes to Existing Documentation =head3 L<perlcheat> =over 4 =item * L<perlcheat> has been reorganized, and a few new sections were added. =back =head3 L<perldata> =over 4 =item * Now explicitly documents the behaviour of hash initializer lists that contain duplicate keys. =back =head3 L<perldiag> =over 4 =item * The explanation of symbolic references being prevented by "strict refs" now doesn't assume that the reader knows what symbolic references are. =back =head3 L<perlfaq> =over 4 =item * L<perlfaq> has been synchronized with version 5.0150040 from CPAN. =back =head3 L<perlfunc> =over 4 =item * The return value of C<pipe> is now documented. =item * Clarified documentation of C<our>. =back =head3 L<perlop> =over 4 =item * Loop control verbs (C<dump>, C<goto>, C<next>, C<last> and C<redo>) have always had the same precedence as assignment operators, but this was not documented until now. =back =head3 Diagnostics The following additions or changes have been made to diagnostic output, including warnings and fatal error messages. For the complete list of diagnostic messages, see L<perldiag>. =head2 New Diagnostics =head3 New Errors =over 4 =item * L<Unterminated delimiter for here document|perldiag/"Unterminated delimiter for here document"> This message now occurs when a here document label has an initial quotation mark but the final quotation mark is missing. This replaces a bogus and misleading error message about not finding the label itself [perl #114104]. =item * L<panic: child pseudo-process was never scheduled|perldiag/"panic: child pseudo-process was never scheduled"> This error is thrown when a child pseudo-process in the ithreads implementation on Windows was not scheduled within the time period allowed and therefore was not able to initialize properly [perl #88840]. =item * L<Group name must start with a non-digit word character in regex; marked by <-- HERE in mE<sol>%sE<sol>|perldiag/"Group name must start with a non-digit word character in regex; marked by <-- HERE in m/%s/"> This error has been added for C<(?&0)>, which is invalid. It used to produce an incomprehensible error message [perl #101666]. =item * L<Can't use an undefined value as a subroutine reference|perldiag/"Can't use an undefined value as %s reference"> Calling an undefined value as a subroutine now produces this error message. It used to, but was accidentally disabled, first in Perl 5.004 for non-magical variables, and then in Perl v5.14 for magical (e.g., tied) variables. It has now been restored. In the mean time, undef was treated as an empty string [perl #113576]. =item * L<Experimental "%s" subs not enabled|perldiag/"Experimental "%s" subs not enabled"> To use lexical subs, you must first enable them: no warnings 'experimental::lexical_subs'; use feature 'lexical_subs'; my sub foo { ... } =back =head3 New Warnings =over 4 =item * L<'Strings with code points over 0xFF may not be mapped into in-memory file handles'|perldiag/"Strings with code points over 0xFF may not be mapped into in-memory file handles"> =item * L<'%s' resolved to '\o{%s}%d'|perldiag/"'%s' resolved to '\o{%s}%d'"> =item * L<'Trailing white-space in a charnames alias definition is deprecated'|perldiag/"Trailing white-space in a charnames alias definition is deprecated"> =item * L<'A sequence of multiple spaces in a charnames alias definition is deprecated'|perldiag/"A sequence of multiple spaces in a charnames alias definition is deprecated"> =item * L<'Passing malformed UTF-8 to "%s" is deprecated'|perldiag/"Passing malformed UTF-8 to "%s" is deprecated"> =item * L<Subroutine "&%s" is not available|perldiag/"Subroutine "&%s" is not available"> (W closure) During compilation, an inner named subroutine or eval is attempting to capture an outer lexical subroutine that is not currently available. This can happen for one of two reasons. First, the lexical subroutine may be declared in an outer anonymous subroutine that has not yet been created. (Remember that named subs are created at compile time, while anonymous subs are created at run-time.) For example, sub { my sub a {...} sub f { \&a } } At the time that f is created, it can't capture the current the "a" sub, since the anonymous subroutine hasn't been created yet. Conversely, the following won't give a warning since the anonymous subroutine has by now been created and is live: sub { my sub a {...} eval 'sub f { \&a }' }->(); The second situation is caused by an eval accessing a variable that has gone out of scope, for example, sub f { my sub a {...} sub { eval '\&a' } } f()->(); Here, when the '\&a' in the eval is being compiled, f() is not currently being executed, so its &a is not available for capture. =item * L<"%s" subroutine &%s masks earlier declaration in same %s|perldiag/"%s" subroutine &%s masks earlier declaration in same %s> (W misc) A "my" or "state" subroutine has been redeclared in the current scope or statement, effectively eliminating all access to the previous instance. This is almost always a typographical error. Note that the earlier subroutine will still exist until the end of the scope or until all closure references to it are destroyed. =item * L<The %s feature is experimental|perldiag/"The %s feature is experimental"> (S experimental) This warning is emitted if you enable an experimental feature via C<use feature>. Simply suppress the warning if you want to use the feature, but know that in doing so you are taking the risk of using an experimental feature which may change or be removed in a future Perl version: no warnings "experimental::lexical_subs"; use feature "lexical_subs"; =item * L<sleep(%u) too large|perldiag/"sleep(%u) too large"> (W overflow) You called C<sleep> with a number that was larger than it can reliably handle and C<sleep> probably slept for less time than requested. =item * L<Wide character in setenv|perldiag/"Wide character in %s"> Attempts to put wide characters into environment variables via C<%ENV> now provoke this warning. =item * "L<Invalid negative number (%s) in chr|perldiag/"Invalid negative number (%s) in chr">" C<chr()> now warns when passed a negative value [perl #83048]. =item * "L<Integer overflow in srand|perldiag/"Integer overflow in srand">" C<srand()> now warns when passed a value that doesn't fit in a C<UV> (since the value will be truncated rather than overflowing) [perl #40605]. =item * "L<-i used with no filenames on the command line, reading from STDIN|perldiag/"-i used with no filenames on the command line, reading from STDIN">" Running perl with the C<-i> flag now warns if no input files are provided on the command line [perl #113410]. =back =head2 Changes to Existing Diagnostics =over 4 =item * L<$* is no longer supported|perldiag/"$* is no longer supported"> The warning that use of C<$*> and C<$#> is no longer supported is now generated for every location that references them. Previously it would fail to be generated if another variable using the same typeglob was seen first (e.g. C<@*> before C<$*>), and would not be generated for the second and subsequent uses. (It's hard to fix the failure to generate warnings at all without also generating them every time, and warning every time is consistent with the warnings that C<$[> used to generate.) =item * The warnings for C<\b{> and C<\B{> were added. They are a deprecation warning which should be turned off by that category. One should not have to turn off regular regexp warnings as well to get rid of these. =item * L<Constant(%s): Call to &{$^H{%s}} did not return a defined value|perldiag/Constant(%s): Call to &{$^H{%s}} did not return a defined value> Constant overloading that returns C<undef> results in this error message. For numeric constants, it used to say "Constant(undef)". "undef" has been replaced with the number itself. =item * The error produced when a module cannot be loaded now includes a hint that the module may need to be installed: "Can't locate hopping.pm in @INC (you may need to install the hopping module) (@INC contains: ...)" =item * L<vector argument not supported with alpha versions|perldiag/vector argument not supported with alpha versions> This warning was not suppressible, even with C<no warnings>. Now it is suppressible, and has been moved from the "internal" category to the "printf" category. =item * C<< Can't do {n,m} with n > m in regex; marked by <-- HERE in m/%s/ >> This fatal error has been turned into a warning that reads: L<< Quantifier {n,m} with n > m can't match in regex | perldiag/Quantifier {n,m} with n > m can't match in regex >> (W regexp) Minima should be less than or equal to maxima. If you really want your regexp to match something 0 times, just put {0}. =item * The "Runaway prototype" warning that occurs in bizarre cases has been removed as being unhelpful and inconsistent. =item * The "Not a format reference" error has been removed, as the only case in which it could be triggered was a bug. =item * The "Unable to create sub named %s" error has been removed for the same reason. =item * The 'Can't use "my %s" in sort comparison' error has been downgraded to a warning, '"my %s" used in sort comparison' (with 'state' instead of 'my' for state variables). In addition, the heuristics for guessing whether lexical $a or $b has been misused have been improved to generate fewer false positives. Lexical $a and $b are no longer disallowed if they are outside the sort block. Also, a named unary or list operator inside the sort block no longer causes the $a or $b to be ignored [perl #86136]. =back =head1 Utility Changes =head3 L<h2xs> =over 4 =item * F<h2xs> no longer produces invalid code for empty defines. [perl #20636] =back =head1 Configuration and Compilation =over 4 =item * Added C<useversionedarchname> option to Configure When set, it includes 'api_versionstring' in 'archname'. E.g. x86_64-linux-5.13.6-thread-multi. It is unset by default. This feature was requested by Tim Bunce, who observed that C<INSTALL_BASE> creates a library structure that does not differentiate by perl version. Instead, it places architecture specific files in "$install_base/lib/perl5/$archname". This makes it difficult to use a common C<INSTALL_BASE> library path with multiple versions of perl. By setting C<-Duseversionedarchname>, the $archname will be distinct for architecture I<and> API version, allowing mixed use of C<INSTALL_BASE>. =item * Add a C<PERL_NO_INLINE_FUNCTIONS> option If C<PERL_NO_INLINE_FUNCTIONS> is defined, don't include "inline.h" This permits test code to include the perl headers for definitions without creating a link dependency on the perl library (which may not exist yet). =item * Configure will honour the external C<MAILDOMAIN> environment variable, if set. =item * C<installman> no longer ignores the silent option =item * Both C<META.yml> and C<META.json> files are now included in the distribution. =item * F<Configure> will now correctly detect C<isblank()> when compiling with a C++ compiler. =item * The pager detection in F<Configure> has been improved to allow responses which specify options after the program name, e.g. B</usr/bin/less -R>, if the user accepts the default value. This helps B<perldoc> when handling ANSI escapes [perl #72156]. =back =head1 Testing =over 4 =item * The test suite now has a section for tests that require very large amounts of memory. These tests won't run by default; they can be enabled by setting the C<PERL_TEST_MEMORY> environment variable to the number of gibibytes of memory that may be safely used. =back =head1 Platform Support =head2 Discontinued Platforms =over 4 =item BeOS BeOS was an operating system for personal computers developed by Be Inc, initially for their BeBox hardware. The OS Haiku was written as an open source replacement for/continuation of BeOS, and its perl port is current and actively maintained. =item UTS Global Support code relating to UTS global has been removed. UTS was a mainframe version of System V created by Amdahl, subsequently sold to UTS Global. The port has not been touched since before Perl v5.8.0, and UTS Global is now defunct. =item VM/ESA Support for VM/ESA has been removed. The port was tested on 2.3.0, which IBM ended service on in March 2002. 2.4.0 ended service in June 2003, and was superseded by Z/VM. The current version of Z/VM is V6.2.0, and scheduled for end of service on 2015/04/30. =item MPE/IX Support for MPE/IX has been removed. =item EPOC Support code relating to EPOC has been removed. EPOC was a family of operating systems developed by Psion for mobile devices. It was the predecessor of Symbian. The port was last updated in April 2002. =item Rhapsody Support for Rhapsody has been removed. =back =head2 Platform-Specific Notes =head3 AIX Configure now always adds C<-qlanglvl=extc99> to the CC flags on AIX when using xlC. This will make it easier to compile a number of XS-based modules that assume C99 [perl #113778]. =head3 clang++ There is now a workaround for a compiler bug that prevented compiling with clang++ since Perl v5.15.7 [perl #112786]. =head3 C++ When compiling the Perl core as C++ (which is only semi-supported), the mathom functions are now compiled as C<extern "C">, to ensure proper binary compatibility. (However, binary compatibility isn't generally guaranteed anyway in the situations where this would matter.) =head3 Darwin Stop hardcoding an alignment on 8 byte boundaries to fix builds using -Dusemorebits. =head3 Haiku Perl should now work out of the box on Haiku R1 Alpha 4. =head3 MidnightBSD C<libc_r> was removed from recent versions of MidnightBSD and older versions work better with C<pthread>. Threading is now enabled using C<pthread> which corrects build errors with threading enabled on 0.4-CURRENT. =head3 Solaris In Configure, avoid running sed commands with flags not supported on Solaris. =head3 VMS =over =item * Where possible, the case of filenames and command-line arguments is now preserved by enabling the CRTL features C<DECC$EFS_CASE_PRESERVE> and C<DECC$ARGV_PARSE_STYLE> at start-up time. The latter only takes effect when extended parse is enabled in the process from which Perl is run. =item * The character set for Extended Filename Syntax (EFS) is now enabled by default on VMS. Among other things, this provides better handling of dots in directory names, multiple dots in filenames, and spaces in filenames. To obtain the old behavior, set the logical name C<DECC$EFS_CHARSET> to C<DISABLE>. =item * Fixed linking on builds configured with C<-Dusemymalloc=y>. =item * Experimental support for building Perl with the HP C++ compiler is available by configuring with C<-Dusecxx>. =item * All C header files from the top-level directory of the distribution are now installed on VMS, providing consistency with a long-standing practice on other platforms. Previously only a subset were installed, which broke non-core extension builds for extensions that depended on the missing include files. =item * Quotes are now removed from the command verb (but not the parameters) for commands spawned via C<system>, backticks, or a piped C<open>. Previously, quotes on the verb were passed through to DCL, which would fail to recognize the command. Also, if the verb is actually a path to an image or command procedure on an ODS-5 volume, quoting it now allows the path to contain spaces. =item * The B<a2p> build has been fixed for the HP C++ compiler on OpenVMS. =back =head3 Win32 =over =item * Perl can now be built using Microsoft's Visual C++ 2012 compiler by specifying CCTYPE=MSVC110 (or MSVC110FREE if you are using the free Express edition for Windows Desktop) in F<win32/Makefile>. =item * The option to build without C<USE_SOCKETS_AS_HANDLES> has been removed. =item * Fixed a problem where perl could crash while cleaning up threads (including the main thread) in threaded debugging builds on Win32 and possibly other platforms [perl #114496]. =item * A rare race condition that would lead to L<sleep|perlfunc/sleep> taking more time than requested, and possibly even hanging, has been fixed [perl #33096]. =item * C<link> on Win32 now attempts to set C<$!> to more appropriate values based on the Win32 API error code. [perl #112272] Perl no longer mangles the environment block, e.g. when launching a new sub-process, when the environment contains non-ASCII characters. Known problems still remain, however, when the environment contains characters outside of the current ANSI codepage (e.g. see the item about Unicode in C<%ENV> in L<http://perl5.git.perl.org/perl.git/blob/HEAD:/Porting/todo.pod>). [perl #113536] =item * Building perl with some Windows compilers used to fail due to a problem with miniperl's C<glob> operator (which uses the C<perlglob> program) deleting the PATH environment variable [perl #113798]. =item * A new makefile option, C<USE_64_BIT_INT>, has been added to the Windows makefiles. Set this to "define" when building a 32-bit perl if you want it to use 64-bit integers. Machine code size reductions, already made to the DLLs of XS modules in Perl v5.17.2, have now been extended to the perl DLL itself. Building with VC++ 6.0 was inadvertently broken in Perl v5.17.2 but has now been fixed again. =back =head3 WinCE Building on WinCE is now possible once again, although more work is required to fully restore a clean build. =head1 Internal Changes =over =item * Synonyms for the misleadingly named C<av_len()> have been created: C<av_top_index()> and C<av_tindex>. All three of these return the number of the highest index in the array, not the number of elements it contains. =item * SvUPGRADE() is no longer an expression. Originally this macro (and its underlying function, sv_upgrade()) were documented as boolean, although in reality they always croaked on error and never returned false. In 2005 the documentation was updated to specify a void return value, but SvUPGRADE() was left always returning 1 for backwards compatibility. This has now been removed, and SvUPGRADE() is now a statement with no return value. So this is now a syntax error: if (!SvUPGRADE(sv)) { croak(...); } If you have code like that, simply replace it with SvUPGRADE(sv); or to avoid compiler warnings with older perls, possibly (void)SvUPGRADE(sv); =item * Perl has a new copy-on-write mechanism that allows any SvPOK scalar to be upgraded to a copy-on-write scalar. A reference count on the string buffer is stored in the string buffer itself. This feature is B<not enabled by default>. It can be enabled in a perl build by running F<Configure> with B<-Accflags=-DPERL_NEW_COPY_ON_WRITE>, and we would encourage XS authors to try their code with such an enabled perl, and provide feedback. Unfortunately, there is not yet a good guide to updating XS code to cope with COW. Until such a document is available, consult the perl5-porters mailing list. It breaks a few XS modules by allowing copy-on-write scalars to go through code paths that never encountered them before. =item * Copy-on-write no longer uses the SvFAKE and SvREADONLY flags. Hence, SvREADONLY indicates a true read-only SV. Use the SvIsCOW macro (as before) to identify a copy-on-write scalar. =item * C<PL_glob_index> is gone. =item * The private Perl_croak_no_modify has had its context parameter removed. It is now has a void prototype. Users of the public API croak_no_modify remain unaffected. =item * Copy-on-write (shared hash key) scalars are no longer marked read-only. C<SvREADONLY> returns false on such an SV, but C<SvIsCOW> still returns true. =item * A new op type, C<OP_PADRANGE> has been introduced. The perl peephole optimiser will, where possible, substitute a single padrange op for a pushmark followed by one or more pad ops, and possibly also skipping list and nextstate ops. In addition, the op can carry out the tasks associated with the RHS of a C<< my(...) = @_ >> assignment, so those ops may be optimised away too. =item * Case-insensitive matching inside a [bracketed] character class with a multi-character fold no longer excludes one of the possibilities in the circumstances that it used to. [perl #89774]. =item * C<PL_formfeed> has been removed. =item * The regular expression engine no longer reads one byte past the end of the target string. While for all internally well-formed scalars this should never have been a problem, this change facilitates clever tricks with string buffers in CPAN modules. [perl #73542] =item * Inside a BEGIN block, C<PL_compcv> now points to the currently-compiling subroutine, rather than the BEGIN block itself. =item * C<mg_length> has been deprecated. =item * C<sv_len> now always returns a byte count and C<sv_len_utf8> a character count. Previously, C<sv_len> and C<sv_len_utf8> were both buggy and would sometimes returns bytes and sometimes characters. C<sv_len_utf8> no longer assumes that its argument is in UTF-8. Neither of these creates UTF-8 caches for tied or overloaded values or for non-PVs any more. =item * C<sv_mortalcopy> now copies string buffers of shared hash key scalars when called from XS modules [perl #79824]. =item * The new C<RXf_MODIFIES_VARS> flag can be set by custom regular expression engines to indicate that the execution of the regular expression may cause variables to be modified. This lets C<s///> know to skip certain optimisations. Perl's own regular expression engine sets this flag for the special backtracking verbs that set $REGMARK and $REGERROR. =item * The APIs for accessing lexical pads have changed considerably. C<PADLIST>s are now longer C<AV>s, but their own type instead. C<PADLIST>s now contain a C<PAD> and a C<PADNAMELIST> of C<PADNAME>s, rather than C<AV>s for the pad and the list of pad names. C<PAD>s, C<PADNAMELIST>s, and C<PADNAME>s are to be accessed as such through the newly added pad API instead of the plain C<AV> and C<SV> APIs. See L<perlapi> for details. =item * In the regex API, the numbered capture callbacks are passed an index indicating what match variable is being accessed. There are special index values for the C<$`, $&, $&> variables. Previously the same three values were used to retrieve C<${^PREMATCH}, ${^MATCH}, ${^POSTMATCH}> too, but these have now been assigned three separate values. See L<perlreapi/Numbered capture callbacks>. =item * C<PL_sawampersand> was previously a boolean indicating that any of C<$`, $&, $&> had been seen; it now contains three one-bit flags indicating the presence of each of the variables individually. =item * The C<CV *> typemap entry now supports C<&{}> overloading and typeglobs, just like C<&{...}> [perl #96872]. =item * The C<SVf_AMAGIC> flag to indicate overloading is now on the stash, not the object. It is now set automatically whenever a method or @ISA changes, so its meaning has changed, too. It now means "potentially overloaded". When the overload table is calculated, the flag is automatically turned off if there is no overloading, so there should be no noticeable slowdown. The staleness of the overload tables is now checked when overload methods are invoked, rather than during C<bless>. "A" magic is gone. The changes to the handling of the C<SVf_AMAGIC> flag eliminate the need for it. C<PL_amagic_generation> has been removed as no longer necessary. For XS modules, it is now a macro alias to C<PL_na>. The fallback overload setting is now stored in a stash entry separate from overloadedness itself. =item * The character-processing code has been cleaned up in places. The changes should be operationally invisible. =item * The C<study> function was made a no-op in v5.16. It was simply disabled via a C<return> statement; the code was left in place. Now the code supporting what C<study> used to do has been removed. =item * Under threaded perls, there is no longer a separate PV allocated for every COP to store its package name (C<< cop->stashpv >>). Instead, there is an offset (C<< cop->stashoff >>) into the new C<PL_stashpad> array, which holds stash pointers. =item * In the pluggable regex API, the C<regexp_engine> struct has acquired a new field C<op_comp>, which is currently just for perl's internal use, and should be initialized to NULL by other regex plugin modules. =item * A new function C<alloccopstash> has been added to the API, but is considered experimental. See L<perlapi>. =item * Perl used to implement get magic in a way that would sometimes hide bugs in code that could call mg_get() too many times on magical values. This hiding of errors no longer occurs, so long-standing bugs may become visible now. If you see magic-related errors in XS code, check to make sure it, together with the Perl API functions it uses, calls mg_get() only once on SvGMAGICAL() values. =item * OP allocation for CVs now uses a slab allocator. This simplifies memory management for OPs allocated to a CV, so cleaning up after a compilation error is simpler and safer [perl #111462][perl #112312]. =item * C<PERL_DEBUG_READONLY_OPS> has been rewritten to work with the new slab allocator, allowing it to catch more violations than before. =item * The old slab allocator for ops, which was only enabled for C<PERL_IMPLICIT_SYS> and C<PERL_DEBUG_READONLY_OPS>, has been retired. =back =head1 Selected Bug Fixes =over 4 =item * Here document terminators no longer require a terminating newline character when they occur at the end of a file. This was already the case at the end of a string eval [perl #65838]. =item * C<-DPERL_GLOBAL_STRUCT> builds now free the global struct B<after> they've finished using it. =item * A trailing '/' on a path in @INC will no longer have an additional '/' appended. =item * The C<:crlf> layer now works when unread data doesn't fit into its own buffer. [perl #112244]. =item * C<ungetc()> now handles UTF-8 encoded data. [perl #116322]. =item * A bug in the core typemap caused any C types that map to the T_BOOL core typemap entry to not be set, updated, or modified when the T_BOOL variable was used in an OUTPUT: section with an exception for RETVAL. T_BOOL in an INPUT: section was not affected. Using a T_BOOL return type for an XSUB (RETVAL) was not affected. A side effect of fixing this bug is, if a T_BOOL is specified in the OUTPUT: section (which previous did nothing to the SV), and a read only SV (literal) is passed to the XSUB, croaks like "Modification of a read-only value attempted" will happen. [perl #115796] =item * On many platforms, providing a directory name as the script name caused perl to do nothing and report success. It should now universally report an error and exit nonzero. [perl #61362] =item * C<sort {undef} ...> under fatal warnings no longer crashes. It had begun crashing in Perl v5.16. =item * Stashes blessed into each other (C<bless \%Foo::, 'Bar'; bless \%Bar::, 'Foo'>) no longer result in double frees. This bug started happening in Perl v5.16. =item * Numerous memory leaks have been fixed, mostly involving fatal warnings and syntax errors. =item * Some failed regular expression matches such as C<'f' =~ /../g> were not resetting C<pos>. Also, "match-once" patterns (C<m?...?g>) failed to reset it, too, when invoked a second time [perl #23180]. =item * Several bugs involving C<local *ISA> and C<local *Foo::> causing stale MRO caches have been fixed. =item * Defining a subroutine when its typeglob has been aliased no longer results in stale method caches. This bug was introduced in Perl v5.10. =item * Localising a typeglob containing a subroutine when the typeglob's package has been deleted from its parent stash no longer produces an error. This bug was introduced in Perl v5.14. =item * Under some circumstances, C<local *method=...> would fail to reset method caches upon scope exit. =item * C</[.foo.]/> is no longer an error, but produces a warning (as before) and is treated as C</[.fo]/> [perl #115818]. =item * C<goto $tied_var> now calls FETCH before deciding what type of goto (subroutine or label) this is. =item * Renaming packages through glob assignment (C<*Foo:: = *Bar::; *Bar:: = *Baz::>) in combination with C<m?...?> and C<reset> no longer makes threaded builds crash. =item * A number of bugs related to assigning a list to hash have been fixed. Many of these involve lists with repeated keys like C<(1, 1, 1, 1)>. =over 4 =item * The expression C<scalar(%h = (1, 1, 1, 1))> now returns C<4>, not C<2>. =item * The return value of C<%h = (1, 1, 1)> in list context was wrong. Previously this would return C<(1, undef, 1)>, now it returns C<(1, undef)>. =item * Perl now issues the same warning on C<($s, %h) = (1, {})> as it does for C<(%h) = ({})>, "Reference found where even-sized list expected". =item * A number of additional edge cases in list assignment to hashes were corrected. For more details see commit 23b7025ebc. =back =item * Attributes applied to lexical variables no longer leak memory. [perl #114764] =item * C<dump>, C<goto>, C<last>, C<next>, C<redo> or C<require> followed by a bareword (or version) and then an infix operator is no longer a syntax error. It used to be for those infix operators (like C<+>) that have a different meaning where a term is expected. [perl #105924] =item * C<require a::b . 1> and C<require a::b + 1> no longer produce erroneous ambiguity warnings. [perl #107002] =item * Class method calls are now allowed on any string, and not just strings beginning with an alphanumeric character. [perl #105922] =item * An empty pattern created with C<qr//> used in C<m///> no longer triggers the "empty pattern reuses last pattern" behaviour. [perl #96230] =item * Tying a hash during iteration no longer results in a memory leak. =item * Freeing a tied hash during iteration no longer results in a memory leak. =item * List assignment to a tied array or hash that dies on STORE no longer results in a memory leak. =item * If the hint hash (C<%^H>) is tied, compile-time scope entry (which copies the hint hash) no longer leaks memory if FETCH dies. [perl #107000] =item * Constant folding no longer inappropriately triggers the special C<split " "> behaviour. [perl #94490] =item * C<defined scalar(@array)>, C<defined do { &foo }>, and similar constructs now treat the argument to C<defined> as a simple scalar. [perl #97466] =item * Running a custom debugging that defines no C<*DB::DB> glob or provides a subroutine stub for C<&DB::DB> no longer results in a crash, but an error instead. [perl #114990] =item * C<reset ""> now matches its documentation. C<reset> only resets C<m?...?> patterns when called with no argument. An empty string for an argument now does nothing. (It used to be treated as no argument.) [perl #97958] =item * C<printf> with an argument returning an empty list no longer reads past the end of the stack, resulting in erratic behaviour. [perl #77094] =item * C<--subname> no longer produces erroneous ambiguity warnings. [perl #77240] =item * C<v10> is now allowed as a label or package name. This was inadvertently broken when v-strings were added in Perl v5.6. [perl #56880] =item * C<length>, C<pos>, C<substr> and C<sprintf> could be confused by ties, overloading, references and typeglobs if the stringification of such changed the internal representation to or from UTF-8. [perl #114410] =item * utf8::encode now calls FETCH and STORE on tied variables. utf8::decode now calls STORE (it was already calling FETCH). =item * C<$tied =~ s/$non_utf8/$utf8/> no longer loops infinitely if the tied variable returns a Latin-1 string, shared hash key scalar, or reference or typeglob that stringifies as ASCII or Latin-1. This was a regression from v5.12. =item * C<s///> without /e is now better at detecting when it needs to forego certain optimisations, fixing some buggy cases: =over =item * Match variables in certain constructs (C<&&>, C<||>, C<..> and others) in the replacement part; e.g., C<s/(.)/$l{$a||$1}/g>. [perl #26986] =item * Aliases to match variables in the replacement. =item * C<$REGERROR> or C<$REGMARK> in the replacement. [perl #49190] =item * An empty pattern (C<s//$foo/>) that causes the last-successful pattern to be used, when that pattern contains code blocks that modify the variables in the replacement. =back =item * The taintedness of the replacement string no longer affects the taintedness of the return value of C<s///e>. =item * The C<$|> autoflush variable is created on-the-fly when needed. If this happened (e.g., if it was mentioned in a module or eval) when the currently-selected filehandle was a typeglob with an empty IO slot, it used to crash. [perl #115206] =item * Line numbers at the end of a string eval are no longer off by one. [perl #114658] =item * @INC filters (subroutines returned by subroutines in @INC) that set $_ to a copy-on-write scalar no longer cause the parser to modify that string buffer in place. =item * C<length($object)> no longer returns the undefined value if the object has string overloading that returns undef. [perl #115260] =item * The use of C<PL_stashcache>, the stash name lookup cache for method calls, has been restored, Commit da6b625f78f5f133 in August 2011 inadvertently broke the code that looks up values in C<PL_stashcache>. As it's only a cache, quite correctly everything carried on working without it. =item * The error "Can't localize through a reference" had disappeared in v5.16.0 when C<local %$ref> appeared on the last line of an lvalue subroutine. This error disappeared for C<\local %$ref> in perl v5.8.1. It has now been restored. =item * The parsing of here-docs has been improved significantly, fixing several parsing bugs and crashes and one memory leak, and correcting wrong subsequent line numbers under certain conditions. =item * Inside an eval, the error message for an unterminated here-doc no longer has a newline in the middle of it [perl #70836]. =item * A substitution inside a substitution pattern (C<s/${s|||}//>) no longer confuses the parser. =item * It may be an odd place to allow comments, but C<s//"" # hello/e> has always worked, I<unless> there happens to be a null character before the first #. Now it works even in the presence of nulls. =item * An invalid range in C<tr///> or C<y///> no longer results in a memory leak. =item * String eval no longer treats a semicolon-delimited quote-like operator at the very end (C<eval 'q;;'>) as a syntax error. =item * C<< warn {$_ => 1} + 1 >> is no longer a syntax error. The parser used to get confused with certain list operators followed by an anonymous hash and then an infix operator that shares its form with a unary operator. =item * C<(caller $n)[6]> (which gives the text of the eval) used to return the actual parser buffer. Modifying it could result in crashes. Now it always returns a copy. The string returned no longer has "\n;" tacked on to the end. The returned text also includes here-doc bodies, which used to be omitted. =item * The UTF-8 position cache is now reset when accessing magical variables, to avoid the string buffer and the UTF-8 position cache getting out of sync [perl #114410]. =item * Various cases of get magic being called twice for magical UTF-8 strings have been fixed. =item * This code (when not in the presence of C<$&> etc) $_ = 'x' x 1_000_000; 1 while /(.)/; used to skip the buffer copy for performance reasons, but suffered from C<$1> etc changing if the original string changed. That's now been fixed. =item * Perl doesn't use PerlIO anymore to report out of memory messages, as PerlIO might attempt to allocate more memory. =item * In a regular expression, if something is quantified with C<{n,m}> where C<S<n E<gt> m>>, it can't possibly match. Previously this was a fatal error, but now is merely a warning (and that something won't match). [perl #82954]. =item * It used to be possible for formats defined in subroutines that have subsequently been undefined and redefined to close over variables in the wrong pad (the newly-defined enclosing sub), resulting in crashes or "Bizarre copy" errors. =item * Redefinition of XSUBs at run time could produce warnings with the wrong line number. =item * The %vd sprintf format does not support version objects for alpha versions. It used to output the format itself (%vd) when passed an alpha version, and also emit an "Invalid conversion in printf" warning. It no longer does, but produces the empty string in the output. It also no longer leaks memory in this case. =item * C<< $obj->SUPER::method >> calls in the main package could fail if the SUPER package had already been accessed by other means. =item * Stash aliasing (C<< *foo:: = *bar:: >>) no longer causes SUPER calls to ignore changes to methods or @ISA or use the wrong package. =item * Method calls on packages whose names end in ::SUPER are no longer treated as SUPER method calls, resulting in failure to find the method. Furthermore, defining subroutines in such packages no longer causes them to be found by SUPER method calls on the containing package [perl #114924]. =item * C<\w> now matches the code points U+200C (ZERO WIDTH NON-JOINER) and U+200D (ZERO WIDTH JOINER). C<\W> no longer matches these. This change is because Unicode corrected their definition of what C<\w> should match. =item * C<dump LABEL> no longer leaks its label. =item * Constant folding no longer changes the behaviour of functions like C<stat()> and C<truncate()> that can take either filenames or handles. C<stat 1 ? foo : bar> nows treats its argument as a file name (since it is an arbitrary expression), rather than the handle "foo". =item * C<truncate FOO, $len> no longer falls back to treating "FOO" as a file name if the filehandle has been deleted. This was broken in Perl v5.16.0. =item * Subroutine redefinitions after sub-to-glob and glob-to-glob assignments no longer cause double frees or panic messages. =item * C<s///> now turns vstrings into plain strings when performing a substitution, even if the resulting string is the same (C<s/a/a/>). =item * Prototype mismatch warnings no longer erroneously treat constant subs as having no prototype when they actually have "". =item * Constant subroutines and forward declarations no longer prevent prototype mismatch warnings from omitting the sub name. =item * C<undef> on a subroutine now clears call checkers. =item * The C<ref> operator started leaking memory on blessed objects in Perl v5.16.0. This has been fixed [perl #114340]. =item * C<use> no longer tries to parse its arguments as a statement, making C<use constant { () };> a syntax error [perl #114222]. =item * On debugging builds, "uninitialized" warnings inside formats no longer cause assertion failures. =item * On debugging builds, subroutines nested inside formats no longer cause assertion failures [perl #78550]. =item * Formats and C<use> statements are now permitted inside formats. =item * C<print $x> and C<sub { print $x }-E<gt>()> now always produce the same output. It was possible for the latter to refuse to close over $x if the variable was not active; e.g., if it was defined outside a currently-running named subroutine. =item * Similarly, C<print $x> and C<print eval '$x'> now produce the same output. This also allows "my $x if 0" variables to be seen in the debugger [perl #114018]. =item * Formats called recursively no longer stomp on their own lexical variables, but each recursive call has its own set of lexicals. =item * Attempting to free an active format or the handle associated with it no longer results in a crash. =item * Format parsing no longer gets confused by braces, semicolons and low-precedence operators. It used to be possible to use braces as format delimiters (instead of C<=> and C<.>), but only sometimes. Semicolons and low-precedence operators in format argument lines no longer confuse the parser into ignoring the line's return value. In format argument lines, braces can now be used for anonymous hashes, instead of being treated always as C<do> blocks. =item * Formats can now be nested inside code blocks in regular expressions and other quoted constructs (C</(?{...})/> and C<qq/${...}/>) [perl #114040]. =item * Formats are no longer created after compilation errors. =item * Under debugging builds, the B<-DA> command line option started crashing in Perl v5.16.0. It has been fixed [perl #114368]. =item * A potential deadlock scenario involving the premature termination of a pseudo- forked child in a Windows build with ithreads enabled has been fixed. This resolves the common problem of the F<t/op/fork.t> test hanging on Windows [perl #88840]. =item * The code which generates errors from C<require()> could potentially read one or two bytes before the start of the filename for filenames less than three bytes long and ending C</\.p?\z/>. This has now been fixed. Note that it could never have happened with module names given to C<use()> or C<require()> anyway. =item * The handling of pathnames of modules given to C<require()> has been made thread-safe on VMS. =item * Non-blocking sockets have been fixed on VMS. =item * Pod can now be nested in code inside a quoted construct outside of a string eval. This used to work only within string evals [perl #114040]. =item * C<goto ''> now looks for an empty label, producing the "goto must have label" error message, instead of exiting the program [perl #111794]. =item * C<goto "\0"> now dies with "Can't find label" instead of "goto must have label". =item * The C function C<hv_store> used to result in crashes when used on C<%^H> [perl #111000]. =item * A call checker attached to a closure prototype via C<cv_set_call_checker> is now copied to closures cloned from it. So C<cv_set_call_checker> now works inside an attribute handler for a closure. =item * Writing to C<$^N> used to have no effect. Now it croaks with "Modification of a read-only value" by default, but that can be overridden by a custom regular expression engine, as with C<$1> [perl #112184]. =item * C<undef> on a control character glob (C<undef *^H>) no longer emits an erroneous warning about ambiguity [perl #112456]. =item * For efficiency's sake, many operators and built-in functions return the same scalar each time. Lvalue subroutines and subroutines in the CORE:: namespace were allowing this implementation detail to leak through. C<print &CORE::uc("a"), &CORE::uc("b")> used to print "BB". The same thing would happen with an lvalue subroutine returning the return value of C<uc>. Now the value is copied in such cases. =item * C<method {}> syntax with an empty block or a block returning an empty list used to crash or use some random value left on the stack as its invocant. Now it produces an error. =item * C<vec> now works with extremely large offsets (E<gt>2 GB) [perl #111730]. =item * Changes to overload settings now take effect immediately, as do changes to inheritance that affect overloading. They used to take effect only after C<bless>. Objects that were created before a class had any overloading used to remain non-overloaded even if the class gained overloading through C<use overload> or @ISA changes, and even after C<bless>. This has been fixed [perl #112708]. =item * Classes with overloading can now inherit fallback values. =item * Overloading was not respecting a fallback value of 0 if there were overloaded objects on both sides of an assignment operator like C<+=> [perl #111856]. =item * C<pos> now croaks with hash and array arguments, instead of producing erroneous warnings. =item * C<while(each %h)> now implies C<while(defined($_ = each %h))>, like C<readline> and C<readdir>. =item * Subs in the CORE:: namespace no longer crash after C<undef *_> when called with no argument list (C<&CORE::time> with no parentheses). =item * C<unpack> no longer produces the "'/' must follow a numeric type in unpack" error when it is the data that are at fault [perl #60204]. =item * C<join> and C<"@array"> now call FETCH only once on a tied C<$"> [perl #8931]. =item * Some subroutine calls generated by compiling core ops affected by a C<CORE::GLOBAL> override had op checking performed twice. The checking is always idempotent for pure Perl code, but the double checking can matter when custom call checkers are involved. =item * A race condition used to exist around fork that could cause a signal sent to the parent to be handled by both parent and child. Signals are now blocked briefly around fork to prevent this from happening [perl #82580]. =item * The implementation of code blocks in regular expressions, such as C<(?{})> and C<(??{})>, has been heavily reworked to eliminate a whole slew of bugs. The main user-visible changes are: =over 4 =item * Code blocks within patterns are now parsed in the same pass as the surrounding code; in particular it is no longer necessary to have balanced braces: this now works: /(?{ $x='{' })/ This means that this error message is no longer generated: Sequence (?{...}) not terminated or not {}-balanced in regex but a new error may be seen: Sequence (?{...}) not terminated with ')' In addition, literal code blocks within run-time patterns are only compiled once, at perl compile-time: for my $p (...) { # this 'FOO' block of code is compiled once, # at the same time as the surrounding 'for' loop /$p{(?{FOO;})/; } =item * Lexical variables are now sane as regards scope, recursion and closure behavior. In particular, C</A(?{B})C/> behaves (from a closure viewpoint) exactly like C</A/ && do { B } && /C/>, while C<qr/A(?{B})C/> is like C<sub {/A/ && do { B } && /C/}>. So this code now works how you might expect, creating three regexes that match 0, 1, and 2: for my $i (0..2) { push @r, qr/^(??{$i})$/; } "1" =~ $r[1]; # matches =item * The C<use re 'eval'> pragma is now only required for code blocks defined at runtime; in particular in the following, the text of the C<$r> pattern is still interpolated into the new pattern and recompiled, but the individual compiled code-blocks within C<$r> are reused rather than being recompiled, and C<use re 'eval'> isn't needed any more: my $r = qr/abc(?{....})def/; /xyz$r/; =item * Flow control operators no longer crash. Each code block runs in a new dynamic scope, so C<next> etc. will not see any enclosing loops. C<return> returns a value from the code block, not from any enclosing subroutine. =item * Perl normally caches the compilation of run-time patterns, and doesn't recompile if the pattern hasn't changed, but this is now disabled if required for the correct behavior of closures. For example: my $code = '(??{$x})'; for my $x (1..3) { # recompile to see fresh value of $x each time $x =~ /$code/; } =item * The C</msix> and C<(?msix)> etc. flags are now propagated into the return value from C<(??{})>; this now works: "AB" =~ /a(??{'b'})/i; =item * Warnings and errors will appear to come from the surrounding code (or for run-time code blocks, from an eval) rather than from an C<re_eval>: use re 'eval'; $c = '(?{ warn "foo" })'; /$c/; /(?{ warn "foo" })/; formerly gave: foo at (re_eval 1) line 1. foo at (re_eval 2) line 1. and now gives: foo at (eval 1) line 1. foo at /some/prog line 2. =back =item * Perl now can be recompiled to use any Unicode version. In v5.16, it worked on Unicodes 6.0 and 6.1, but there were various bugs if earlier releases were used; the older the release the more problems. =item * C<vec> no longer produces "uninitialized" warnings in lvalue context [perl #9423]. =item * An optimization involving fixed strings in regular expressions could cause a severe performance penalty in edge cases. This has been fixed [perl #76546]. =item * In certain cases, including empty subpatterns within a regular expression (such as C<(?:)> or C<(?:|)>) could disable some optimizations. This has been fixed. =item * The "Can't find an opnumber" message that C<prototype> produces when passed a string like "CORE::nonexistent_keyword" now passes UTF-8 and embedded NULs through unchanged [perl #97478]. =item * C<prototype> now treats magical variables like C<$1> the same way as non-magical variables when checking for the CORE:: prefix, instead of treating them as subroutine names. =item * Under threaded perls, a runtime code block in a regular expression could corrupt the package name stored in the op tree, resulting in bad reads in C<caller>, and possibly crashes [perl #113060]. =item * Referencing a closure prototype (C<\&{$_[1]}> in an attribute handler for a closure) no longer results in a copy of the subroutine (or assertion failures on debugging builds). =item * C<eval '__PACKAGE__'> now returns the right answer on threaded builds if the current package has been assigned over (as in C<*ThisPackage:: = *ThatPackage::>) [perl #78742]. =item * If a package is deleted by code that it calls, it is possible for C<caller> to see a stack frame belonging to that deleted package. C<caller> could crash if the stash's memory address was reused for a scalar and a substitution was performed on the same scalar [perl #113486]. =item * C<UNIVERSAL::can> no longer treats its first argument differently depending on whether it is a string or number internally. =item * C<open> with C<< <& >> for the mode checks to see whether the third argument is a number, in determining whether to treat it as a file descriptor or a handle name. Magical variables like C<$1> were always failing the numeric check and being treated as handle names. =item * C<warn>'s handling of magical variables (C<$1>, ties) has undergone several fixes. C<FETCH> is only called once now on a tied argument or a tied C<$@> [perl #97480]. Tied variables returning objects that stringify as "" are no longer ignored. A tied C<$@> that happened to return a reference the I<previous> time it was used is no longer ignored. =item * C<warn ""> now treats C<$@> with a number in it the same way, regardless of whether it happened via C<$@=3> or C<$@="3">. It used to ignore the former. Now it appends "\t...caught", as it has always done with C<$@="3">. =item * Numeric operators on magical variables (e.g., S<C<$1 + 1>>) used to use floating point operations even where integer operations were more appropriate, resulting in loss of accuracy on 64-bit platforms [perl #109542]. =item * Unary negation no longer treats a string as a number if the string happened to be used as a number at some point. So, if C<$x> contains the string "dogs", C<-$x> returns "-dogs" even if C<$y=0+$x> has happened at some point. =item * In Perl v5.14, C<-'-10'> was fixed to return "10", not "+10". But magical variables (C<$1>, ties) were not fixed till now [perl #57706]. =item * Unary negation now treats strings consistently, regardless of the internal C<UTF8> flag. =item * A regression introduced in Perl v5.16.0 involving C<tr/I<SEARCHLIST>/I<REPLACEMENTLIST>/> has been fixed. Only the first instance is supposed to be meaningful if a character appears more than once in C<I<SEARCHLIST>>. Under some circumstances, the final instance was overriding all earlier ones. [perl #113584] =item * Regular expressions like C<qr/\87/> previously silently inserted a NUL character, thus matching as if it had been written C<qr/\00087/>. Now it matches as if it had been written as C<qr/87/>, with a message that the sequence C<"\8"> is unrecognized. =item * C<__SUB__> now works in special blocks (C<BEGIN>, C<END>, etc.). =item * Thread creation on Windows could theoretically result in a crash if done inside a C<BEGIN> block. It still does not work properly, but it no longer crashes [perl #111610]. =item * C<\&{''}> (with the empty string) now autovivifies a stub like any other sub name, and no longer produces the "Unable to create sub" error [perl #94476]. =item * A regression introduced in v5.14.0 has been fixed, in which some calls to the C<re> module would clobber C<$_> [perl #113750]. =item * C<do FILE> now always either sets or clears C<$@>, even when the file can't be read. This ensures that testing C<$@> first (as recommended by the documentation) always returns the correct result. =item * The array iterator used for the C<each @array> construct is now correctly reset when C<@array> is cleared [perl #75596]. This happens, for example, when the array is globally assigned to, as in C<@array = (...)>, but not when its B<values> are assigned to. In terms of the XS API, it means that C<av_clear()> will now reset the iterator. This mirrors the behaviour of the hash iterator when the hash is cleared. =item * C<< $class->can >>, C<< $class->isa >>, and C<< $class->DOES >> now return correct results, regardless of whether that package referred to by C<$class> exists [perl #47113]. =item * Arriving signals no longer clear C<$@> [perl #45173]. =item * Allow C<my ()> declarations with an empty variable list [perl #113554]. =item * During parsing, subs declared after errors no longer leave stubs [perl #113712]. =item * Closures containing no string evals no longer hang on to their containing subroutines, allowing variables closed over by outer subroutines to be freed when the outer sub is freed, even if the inner sub still exists [perl #89544]. =item * Duplication of in-memory filehandles by opening with a "<&=" or ">&=" mode stopped working properly in v5.16.0. It was causing the new handle to reference a different scalar variable. This has been fixed [perl #113764]. =item * C<qr//> expressions no longer crash with custom regular expression engines that do not set C<offs> at regular expression compilation time [perl #112962]. =item * C<delete local> no longer crashes with certain magical arrays and hashes [perl #112966]. =item * C<local> on elements of certain magical arrays and hashes used not to arrange to have the element deleted on scope exit, even if the element did not exist before C<local>. =item * C<scalar(write)> no longer returns multiple items [perl #73690]. =item * String to floating point conversions no longer misparse certain strings under C<use locale> [perl #109318]. =item * C<@INC> filters that die no longer leak memory [perl #92252]. =item * The implementations of overloaded operations are now called in the correct context. This allows, among other things, being able to properly override C<< <> >> [perl #47119]. =item * Specifying only the C<fallback> key when calling C<use overload> now behaves properly [perl #113010]. =item * C<< sub foo { my $a = 0; while ($a) { ... } } >> and C<< sub foo { while (0) { ... } } >> now return the same thing [perl #73618]. =item * String negation now behaves the same under C<use integer;> as it does without [perl #113012]. =item * C<chr> now returns the Unicode replacement character (U+FFFD) for -1, regardless of the internal representation. -1 used to wrap if the argument was tied or a string internally. =item * Using a C<format> after its enclosing sub was freed could crash as of perl v5.12.0, if the format referenced lexical variables from the outer sub. =item * Using a C<format> after its enclosing sub was undefined could crash as of perl v5.10.0, if the format referenced lexical variables from the outer sub. =item * Using a C<format> defined inside a closure, which format references lexical variables from outside, never really worked unless the C<write> call was directly inside the closure. In v5.10.0 it even started crashing. Now the copy of that closure nearest the top of the call stack is used to find those variables. =item * Formats that close over variables in special blocks no longer crash if a stub exists with the same name as the special block before the special block is compiled. =item * The parser no longer gets confused, treating C<eval foo ()> as a syntax error if preceded by C<print;> [perl #16249]. =item * The return value of C<syscall> is no longer truncated on 64-bit platforms [perl #113980]. =item * Constant folding no longer causes C<print 1 ? FOO : BAR> to print to the FOO handle [perl #78064]. =item * C<do subname> now calls the named subroutine and uses the file name it returns, instead of opening a file named "subname". =item * Subroutines looked up by rv2cv check hooks (registered by XS modules) are now taken into consideration when determining whether C<foo bar> should be the sub call C<foo(bar)> or the method call C<< "bar"->foo >>. =item * C<CORE::foo::bar> is no longer treated specially, allowing global overrides to be called directly via C<CORE::GLOBAL::uc(...)> [perl #113016]. =item * Calling an undefined sub whose typeglob has been undefined now produces the customary "Undefined subroutine called" error, instead of "Not a CODE reference". =item * Two bugs involving @ISA have been fixed. C<*ISA = *glob_without_array> and C<undef *ISA; @{*ISA}> would prevent future modifications to @ISA from updating the internal caches used to look up methods. The *glob_without_array case was a regression from Perl v5.12. =item * Regular expression optimisations sometimes caused C<$> with C</m> to produce failed or incorrect matches [perl #114068]. =item * C<__SUB__> now works in a C<sort> block when the enclosing subroutine is predeclared with C<sub foo;> syntax [perl #113710]. =item * Unicode properties only apply to Unicode code points, which leads to some subtleties when regular expressions are matched against above-Unicode code points. There is a warning generated to draw your attention to this. However, this warning was being generated inappropriately in some cases, such as when a program was being parsed. Non-Unicode matches such as C<\w> and C<[:word:]> should not generate the warning, as their definitions don't limit them to apply to only Unicode code points. Now the message is only generated when matching against C<\p{}> and C<\P{}>. There remains a bug, [perl #114148], for the very few properties in Unicode that match just a single code point. The warning is not generated if they are matched against an above-Unicode code point. =item * Uninitialized warnings mentioning hash elements would only mention the element name if it was not in the first bucket of the hash, due to an off-by-one error. =item * A regular expression optimizer bug could cause multiline "^" to behave incorrectly in the presence of line breaks, such that C<"/\n\n" =~ m#\A(?:^/$)#im> would not match [perl #115242]. =item * Failed C<fork> in list context no longer corrupts the stack. C<@a = (1, 2, fork, 3)> used to gobble up the 2 and assign C<(1, undef, 3)> if the C<fork> call failed. =item * Numerous memory leaks have been fixed, mostly involving tied variables that die, regular expression character classes and code blocks, and syntax errors. =item * Assigning a regular expression (C<${qr//}>) to a variable that happens to hold a floating point number no longer causes assertion failures on debugging builds. =item * Assigning a regular expression to a scalar containing a number no longer causes subsequent numification to produce random numbers. =item * Assigning a regular expression to a magic variable no longer wipes away the magic. This was a regression from v5.10. =item * Assigning a regular expression to a blessed scalar no longer results in crashes. This was also a regression from v5.10. =item * Regular expression can now be assigned to tied hash and array elements with flattening into strings. =item * Numifying a regular expression no longer results in an uninitialized warning. =item * Negative array indices no longer cause EXISTS methods of tied variables to be ignored. This was a regression from v5.12. =item * Negative array indices no longer result in crashes on arrays tied to non-objects. =item * C<$byte_overload .= $utf8> no longer results in doubly-encoded UTF-8 if the left-hand scalar happened to have produced a UTF-8 string the last time overloading was invoked. =item * C<goto &sub> now uses the current value of @_, instead of using the array the subroutine was originally called with. This means C<local @_ = (...); goto &sub> now works [perl #43077]. =item * If a debugger is invoked recursively, it no longer stomps on its own lexical variables. Formerly under recursion all calls would share the same set of lexical variables [perl #115742]. =item * C<*_{ARRAY}> returned from a subroutine no longer spontaneously becomes empty. =item * When using C<say> to print to a tied filehandle, the value of C<$\> is correctly localized, even if it was previously undef. [perl #119927] =back =head1 Known Problems =over 4 =item * UTF8-flagged strings in C<%ENV> on HP-UX 11.00 are buggy The interaction of UTF8-flagged strings and C<%ENV> on HP-UX 11.00 is currently dodgy in some not-yet-fully-diagnosed way. Expect test failures in F<t/op/magic.t>, followed by unknown behavior when storing wide characters in the environment. =back =head1 Obituary Hojung Yoon (AMORETTE), 24, of Seoul, South Korea, went to his long rest on May 8, 2013 with llama figurine and autographed TIMTOADY card. He was a brilliant young Perl 5 & 6 hacker and a devoted member of Seoul.pm. He programmed Perl, talked Perl, ate Perl, and loved Perl. We believe that he is still programming in Perl with his broken IBM laptop somewhere. He will be missed. =head1 Acknowledgements Perl v5.18.0 represents approximately 12 months of development since Perl v5.16.0 and contains approximately 400,000 lines of changes across 2,100 files from 113 authors. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl v5.18.0: Aaron Crane, Aaron Trevena, Abhijit Menon-Sen, Adrian M. Enache, Alan Haggai Alavi, Alexandr Ciornii, Andrew Tam, Andy Dougherty, Anton Nikishaev, Aristotle Pagaltzis, Augustina Blair, Bob Ernst, Brad Gilbert, Breno G. de Oliveira, Brian Carlson, Brian Fraser, Charlie Gonzalez, Chip Salzenberg, Chris 'BinGOs' Williams, Christian Hansen, Colin Kuskie, Craig A. Berry, Dagfinn Ilmari Mannsåker, Daniel Dragan, Daniel Perrett, Darin McBride, Dave Rolsky, David Golden, David Leadbeater, David Mitchell, David Nicol, Dominic Hargreaves, E. Choroba, Eric Brine, Evan Miller, Father Chrysostomos, Florian Ragwitz, François Perrad, George Greer, Goro Fuji, H.Merijn Brand, Herbert Breunung, Hugo van der Sanden, Igor Zaytsev, James E Keenan, Jan Dubois, Jasmine Ahuja, Jerry D. Hedden, Jess Robinson, Jesse Luehrs, Joaquin Ferrero, Joel Berger, John Goodyear, John Peacock, Karen Etheridge, Karl Williamson, Karthik Rajagopalan, Kent Fredric, Leon Timmermans, Lucas Holt, Lukas Mai, Marcus Holland-Moritz, Markus Jansen, Martin Hasch, Matthew Horsfall, Max Maischein, Michael G Schwern, Michael Schroeder, Moritz Lenz, Nicholas Clark, Niko Tyni, Oleg Nesterov, Patrik Hägglund, Paul Green, Paul Johnson, Paul Marquess, Peter Martini, Rafael Garcia-Suarez, Reini Urban, Renee Baecker, Rhesa Rozendaal, Ricardo Signes, Robin Barker, Ronald J. Kimball, Ruslan Zakirov, Salvador Fandiño, Sawyer X, Scott Lanning, Sergey Alekseev, Shawn M Moore, Shirakata Kentaro, Shlomi Fish, Sisyphus, Smylers, Steffen Müller, Steve Hay, Steve Peters, Steven Schubiger, Sullivan Beck, Sven Strickroth, Sébastien Aperghis-Tramoni, Thomas Sibley, Tobias Leich, Tom Wyant, Tony Cook, Vadim Konovalov, Vincent Pit, Volker Schatz, Walt Mankowski, Yves Orton, Zefram. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlhaiku.pod 0000644 00000002744 15125556335 0007255 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specially designed to be readable as is. =head1 NAME perlhaiku - Perl version 5.10+ on Haiku =head1 DESCRIPTION This file contains instructions how to build Perl for Haiku and lists known problems. =head1 BUILD AND INSTALL The build procedure is completely standard: ./Configure -de make make install Make perl executable and create a symlink for libperl: chmod a+x /boot/common/bin/perl cd /boot/common/lib; ln -s perl5/5.32.1/BePC-haiku/CORE/libperl.so . Replace C<5.32.1> with your respective version of Perl. =head1 KNOWN PROBLEMS The following problems are encountered with Haiku revision 28311: =over 4 =item * Perl cannot be compiled with threading support ATM. =item * The F<cpan/Socket/t/socketpair.t> test fails. More precisely: the subtests using datagram sockets fail. Unix datagram sockets aren't implemented in Haiku yet. =item * A subtest of the F<cpan/Sys-Syslog/t/syslog.t> test fails. This is due to Haiku not implementing F</dev/log> support yet. =item * The tests F<dist/Net-Ping/t/450_service.t> and F<dist/Net-Ping/t/510_ping_udp.t> fail. This is due to bugs in Haiku's network stack implementation. =back =head1 CONTACT For Haiku specific problems contact the HaikuPorts developers: L<http://ports.haiku-files.org/> The initial Haiku port was done by Ingo Weinhold <ingo_weinhold@gmx.de>. Last update: 2008-10-29 perl5242delta.pod 0000644 00000010021 15125556335 0007545 0 ustar 00 =encoding utf8 =head1 NAME perl5242delta - what is new for perl v5.24.2 =head1 DESCRIPTION This document describes differences between the 5.24.1 release and the 5.24.2 release. If you are upgrading from an earlier release such as 5.24.0, first read L<perl5241delta>, which describes differences between 5.24.0 and 5.24.1. =head1 Security =head2 Improved handling of '.' in @INC in base.pm The handling of (the removal of) C<'.'> in C<@INC> in L<base> has been improved. This resolves some problematic behaviour in the approach taken in Perl 5.24.1, which is probably best described in the following two threads on the Perl 5 Porters mailing list: L<http://www.nntp.perl.org/group/perl.perl5.porters/2016/08/msg238991.html>, L<http://www.nntp.perl.org/group/perl.perl5.porters/2016/10/msg240297.html>. =head2 "Escaped" colons and relative paths in PATH On Unix systems, Perl treats any relative paths in the PATH environment variable as tainted when starting a new process. Previously, it was allowing a backslash to escape a colon (unlike the OS), consequently allowing relative paths to be considered safe if the PATH was set to something like C</\:.>. The check has been fixed to treat C<.> as tainted in that example. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<base> has been upgraded from version 2.23 to 2.23_01. =item * L<Module::CoreList> has been upgraded from version 5.20170114_24 to 5.20170715_24. =back =head1 Selected Bug Fixes =over 4 =item * Fixed a crash with C<s///l> where it thought it was dealing with UTF-8 when it wasn't. L<[perl #129038]|https://rt.perl.org/Ticket/Display.html?id=129038> =back =head1 Acknowledgements Perl 5.24.2 represents approximately 6 months of development since Perl 5.24.1 and contains approximately 2,500 lines of changes across 53 files from 18 authors. Excluding auto-generated files, documentation and release tools, there were approximately 960 lines of changes to 17 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.24.2: Aaron Crane, Abigail, Aristotle Pagaltzis, Chris 'BinGOs' Williams, Dan Collins, David Mitchell, Eric Herman, Father Chrysostomos, James E Keenan, Karl Williamson, Lukas Mai, Renee Baecker, Ricardo Signes, Sawyer X, Stevan Little, Steve Hay, Tony Cook, Yves Orton. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at L<https://rt.perl.org/> . There may also be information at L<http://www.perl.org/> , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications which make it inappropriate to send to a publicly archived mailing list, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlretut.pod 0000644 00000357237 15125556335 0007331 0 ustar 00 =head1 NAME perlretut - Perl regular expressions tutorial =head1 DESCRIPTION This page provides a basic tutorial on understanding, creating and using regular expressions in Perl. It serves as a complement to the reference page on regular expressions L<perlre>. Regular expressions are an integral part of the C<m//>, C<s///>, C<qr//> and C<split> operators and so this tutorial also overlaps with L<perlop/"Regexp Quote-Like Operators"> and L<perlfunc/split>. Perl is widely renowned for excellence in text processing, and regular expressions are one of the big factors behind this fame. Perl regular expressions display an efficiency and flexibility unknown in most other computer languages. Mastering even the basics of regular expressions will allow you to manipulate text with surprising ease. What is a regular expression? At its most basic, a regular expression is a template that is used to determine if a string has certain characteristics. The string is most often some text, such as a line, sentence, web page, or even a whole book, but less commonly it could be some binary data as well. Suppose we want to determine if the text in variable, C<$var> contains the sequence of characters S<C<m u s h r o o m>> (blanks added for legibility). We can write in Perl $var =~ m/mushroom/ The value of this expression will be TRUE if C<$var> contains that sequence of characters, and FALSE otherwise. The portion enclosed in C<'E<sol>'> characters denotes the characteristic we are looking for. We use the term I<pattern> for it. The process of looking to see if the pattern occurs in the string is called I<matching>, and the C<"=~"> operator along with the C<m//> tell Perl to try to match the pattern against the string. Note that the pattern is also a string, but a very special kind of one, as we will see. Patterns are in common use these days; examples are the patterns typed into a search engine to find web pages and the patterns used to list files in a directory, I<e.g.>, "C<ls *.txt>" or "C<dir *.*>". In Perl, the patterns described by regular expressions are used not only to search strings, but to also extract desired parts of strings, and to do search and replace operations. Regular expressions have the undeserved reputation of being abstract and difficult to understand. This really stems simply because the notation used to express them tends to be terse and dense, and not because of inherent complexity. We recommend using the C</x> regular expression modifier (described below) along with plenty of white space to make them less dense, and easier to read. Regular expressions are constructed using simple concepts like conditionals and loops and are no more difficult to understand than the corresponding C<if> conditionals and C<while> loops in the Perl language itself. This tutorial flattens the learning curve by discussing regular expression concepts, along with their notation, one at a time and with many examples. The first part of the tutorial will progress from the simplest word searches to the basic regular expression concepts. If you master the first part, you will have all the tools needed to solve about 98% of your needs. The second part of the tutorial is for those comfortable with the basics and hungry for more power tools. It discusses the more advanced regular expression operators and introduces the latest cutting-edge innovations. A note: to save time, "regular expression" is often abbreviated as regexp or regex. Regexp is a more natural abbreviation than regex, but is harder to pronounce. The Perl pod documentation is evenly split on regexp vs regex; in Perl, there is more than one way to abbreviate it. We'll use regexp in this tutorial. New in v5.22, L<C<use re 'strict'>|re/'strict' mode> applies stricter rules than otherwise when compiling regular expression patterns. It can find things that, while legal, may not be what you intended. =head1 Part 1: The basics =head2 Simple word matching The simplest regexp is simply a word, or more generally, a string of characters. A regexp consisting of just a word matches any string that contains that word: "Hello World" =~ /World/; # matches What is this Perl statement all about? C<"Hello World"> is a simple double-quoted string. C<World> is the regular expression and the C<//> enclosing C</World/> tells Perl to search a string for a match. The operator C<=~> associates the string with the regexp match and produces a true value if the regexp matched, or false if the regexp did not match. In our case, C<World> matches the second word in C<"Hello World">, so the expression is true. Expressions like this are useful in conditionals: if ("Hello World" =~ /World/) { print "It matches\n"; } else { print "It doesn't match\n"; } There are useful variations on this theme. The sense of the match can be reversed by using the C<!~> operator: if ("Hello World" !~ /World/) { print "It doesn't match\n"; } else { print "It matches\n"; } The literal string in the regexp can be replaced by a variable: my $greeting = "World"; if ("Hello World" =~ /$greeting/) { print "It matches\n"; } else { print "It doesn't match\n"; } If you're matching against the special default variable C<$_>, the C<$_ =~> part can be omitted: $_ = "Hello World"; if (/World/) { print "It matches\n"; } else { print "It doesn't match\n"; } And finally, the C<//> default delimiters for a match can be changed to arbitrary delimiters by putting an C<'m'> out front: "Hello World" =~ m!World!; # matches, delimited by '!' "Hello World" =~ m{World}; # matches, note the matching '{}' "/usr/bin/perl" =~ m"/perl"; # matches after '/usr/bin', # '/' becomes an ordinary char C</World/>, C<m!World!>, and C<m{World}> all represent the same thing. When, I<e.g.>, the quote (C<'"'>) is used as a delimiter, the forward slash C<'/'> becomes an ordinary character and can be used in this regexp without trouble. Let's consider how different regexps would match C<"Hello World">: "Hello World" =~ /world/; # doesn't match "Hello World" =~ /o W/; # matches "Hello World" =~ /oW/; # doesn't match "Hello World" =~ /World /; # doesn't match The first regexp C<world> doesn't match because regexps are case-sensitive. The second regexp matches because the substring S<C<'o W'>> occurs in the string S<C<"Hello World">>. The space character C<' '> is treated like any other character in a regexp and is needed to match in this case. The lack of a space character is the reason the third regexp C<'oW'> doesn't match. The fourth regexp "C<World >" doesn't match because there is a space at the end of the regexp, but not at the end of the string. The lesson here is that regexps must match a part of the string I<exactly> in order for the statement to be true. If a regexp matches in more than one place in the string, Perl will always match at the earliest possible point in the string: "Hello World" =~ /o/; # matches 'o' in 'Hello' "That hat is red" =~ /hat/; # matches 'hat' in 'That' With respect to character matching, there are a few more points you need to know about. First of all, not all characters can be used "as is" in a match. Some characters, called I<metacharacters>, are generally reserved for use in regexp notation. The metacharacters are {}[]()^$.|*+?-#\ This list is not as definitive as it may appear (or be claimed to be in other documentation). For example, C<"#"> is a metacharacter only when the C</x> pattern modifier (described below) is used, and both C<"}"> and C<"]"> are metacharacters only when paired with opening C<"{"> or C<"["> respectively; other gotchas apply. The significance of each of these will be explained in the rest of the tutorial, but for now, it is important only to know that a metacharacter can be matched as-is by putting a backslash before it: "2+2=4" =~ /2+2/; # doesn't match, + is a metacharacter "2+2=4" =~ /2\+2/; # matches, \+ is treated like an ordinary + "The interval is [0,1)." =~ /[0,1)./ # is a syntax error! "The interval is [0,1)." =~ /\[0,1\)\./ # matches "#!/usr/bin/perl" =~ /#!\/usr\/bin\/perl/; # matches In the last regexp, the forward slash C<'/'> is also backslashed, because it is used to delimit the regexp. This can lead to LTS (leaning toothpick syndrome), however, and it is often more readable to change delimiters. "#!/usr/bin/perl" =~ m!#\!/usr/bin/perl!; # easier to read The backslash character C<'\'> is a metacharacter itself and needs to be backslashed: 'C:\WIN32' =~ /C:\\WIN/; # matches In situations where it doesn't make sense for a particular metacharacter to mean what it normally does, it automatically loses its metacharacter-ness and becomes an ordinary character that is to be matched literally. For example, the C<'}'> is a metacharacter only when it is the mate of a C<'{'> metacharacter. Otherwise it is treated as a literal RIGHT CURLY BRACKET. This may lead to unexpected results. L<C<use re 'strict'>|re/'strict' mode> can catch some of these. In addition to the metacharacters, there are some ASCII characters which don't have printable character equivalents and are instead represented by I<escape sequences>. Common examples are C<\t> for a tab, C<\n> for a newline, C<\r> for a carriage return and C<\a> for a bell (or alert). If your string is better thought of as a sequence of arbitrary bytes, the octal escape sequence, I<e.g.>, C<\033>, or hexadecimal escape sequence, I<e.g.>, C<\x1B> may be a more natural representation for your bytes. Here are some examples of escapes: "1000\t2000" =~ m(0\t2) # matches "1000\n2000" =~ /0\n20/ # matches "1000\t2000" =~ /\000\t2/ # doesn't match, "0" ne "\000" "cat" =~ /\o{143}\x61\x74/ # matches in ASCII, but a weird way # to spell cat If you've been around Perl a while, all this talk of escape sequences may seem familiar. Similar escape sequences are used in double-quoted strings and in fact the regexps in Perl are mostly treated as double-quoted strings. This means that variables can be used in regexps as well. Just like double-quoted strings, the values of the variables in the regexp will be substituted in before the regexp is evaluated for matching purposes. So we have: $foo = 'house'; 'housecat' =~ /$foo/; # matches 'cathouse' =~ /cat$foo/; # matches 'housecat' =~ /${foo}cat/; # matches So far, so good. With the knowledge above you can already perform searches with just about any literal string regexp you can dream up. Here is a I<very simple> emulation of the Unix grep program: % cat > simple_grep #!/usr/bin/perl $regexp = shift; while (<>) { print if /$regexp/; } ^D % chmod +x simple_grep % simple_grep abba /usr/dict/words Babbage cabbage cabbages sabbath Sabbathize Sabbathizes sabbatical scabbard scabbards This program is easy to understand. C<#!/usr/bin/perl> is the standard way to invoke a perl program from the shell. S<C<$regexp = shift;>> saves the first command line argument as the regexp to be used, leaving the rest of the command line arguments to be treated as files. S<C<< while (<>) >>> loops over all the lines in all the files. For each line, S<C<print if /$regexp/;>> prints the line if the regexp matches the line. In this line, both C<print> and C</$regexp/> use the default variable C<$_> implicitly. With all of the regexps above, if the regexp matched anywhere in the string, it was considered a match. Sometimes, however, we'd like to specify I<where> in the string the regexp should try to match. To do this, we would use the I<anchor> metacharacters C<'^'> and C<'$'>. The anchor C<'^'> means match at the beginning of the string and the anchor C<'$'> means match at the end of the string, or before a newline at the end of the string. Here is how they are used: "housekeeper" =~ /keeper/; # matches "housekeeper" =~ /^keeper/; # doesn't match "housekeeper" =~ /keeper$/; # matches "housekeeper\n" =~ /keeper$/; # matches The second regexp doesn't match because C<'^'> constrains C<keeper> to match only at the beginning of the string, but C<"housekeeper"> has keeper starting in the middle. The third regexp does match, since the C<'$'> constrains C<keeper> to match only at the end of the string. When both C<'^'> and C<'$'> are used at the same time, the regexp has to match both the beginning and the end of the string, I<i.e.>, the regexp matches the whole string. Consider "keeper" =~ /^keep$/; # doesn't match "keeper" =~ /^keeper$/; # matches "" =~ /^$/; # ^$ matches an empty string The first regexp doesn't match because the string has more to it than C<keep>. Since the second regexp is exactly the string, it matches. Using both C<'^'> and C<'$'> in a regexp forces the complete string to match, so it gives you complete control over which strings match and which don't. Suppose you are looking for a fellow named bert, off in a string by himself: "dogbert" =~ /bert/; # matches, but not what you want "dilbert" =~ /^bert/; # doesn't match, but .. "bertram" =~ /^bert/; # matches, so still not good enough "bertram" =~ /^bert$/; # doesn't match, good "dilbert" =~ /^bert$/; # doesn't match, good "bert" =~ /^bert$/; # matches, perfect Of course, in the case of a literal string, one could just as easily use the string comparison S<C<$string eq 'bert'>> and it would be more efficient. The C<^...$> regexp really becomes useful when we add in the more powerful regexp tools below. =head2 Using character classes Although one can already do quite a lot with the literal string regexps above, we've only scratched the surface of regular expression technology. In this and subsequent sections we will introduce regexp concepts (and associated metacharacter notations) that will allow a regexp to represent not just a single character sequence, but a I<whole class> of them. One such concept is that of a I<character class>. A character class allows a set of possible characters, rather than just a single character, to match at a particular point in a regexp. You can define your own custom character classes. These are denoted by brackets C<[...]>, with the set of characters to be possibly matched inside. Here are some examples: /cat/; # matches 'cat' /[bcr]at/; # matches 'bat, 'cat', or 'rat' /item[0123456789]/; # matches 'item0' or ... or 'item9' "abc" =~ /[cab]/; # matches 'a' In the last statement, even though C<'c'> is the first character in the class, C<'a'> matches because the first character position in the string is the earliest point at which the regexp can match. /[yY][eE][sS]/; # match 'yes' in a case-insensitive way # 'yes', 'Yes', 'YES', etc. This regexp displays a common task: perform a case-insensitive match. Perl provides a way of avoiding all those brackets by simply appending an C<'i'> to the end of the match. Then C</[yY][eE][sS]/;> can be rewritten as C</yes/i;>. The C<'i'> stands for case-insensitive and is an example of a I<modifier> of the matching operation. We will meet other modifiers later in the tutorial. We saw in the section above that there were ordinary characters, which represented themselves, and special characters, which needed a backslash C<'\'> to represent themselves. The same is true in a character class, but the sets of ordinary and special characters inside a character class are different than those outside a character class. The special characters for a character class are C<-]\^$> (and the pattern delimiter, whatever it is). C<']'> is special because it denotes the end of a character class. C<'$'> is special because it denotes a scalar variable. C<'\'> is special because it is used in escape sequences, just like above. Here is how the special characters C<]$\> are handled: /[\]c]def/; # matches ']def' or 'cdef' $x = 'bcr'; /[$x]at/; # matches 'bat', 'cat', or 'rat' /[\$x]at/; # matches '$at' or 'xat' /[\\$x]at/; # matches '\at', 'bat, 'cat', or 'rat' The last two are a little tricky. In C<[\$x]>, the backslash protects the dollar sign, so the character class has two members C<'$'> and C<'x'>. In C<[\\$x]>, the backslash is protected, so C<$x> is treated as a variable and substituted in double quote fashion. The special character C<'-'> acts as a range operator within character classes, so that a contiguous set of characters can be written as a range. With ranges, the unwieldy C<[0123456789]> and C<[abc...xyz]> become the svelte C<[0-9]> and C<[a-z]>. Some examples are /item[0-9]/; # matches 'item0' or ... or 'item9' /[0-9bx-z]aa/; # matches '0aa', ..., '9aa', # 'baa', 'xaa', 'yaa', or 'zaa' /[0-9a-fA-F]/; # matches a hexadecimal digit /[0-9a-zA-Z_]/; # matches a "word" character, # like those in a Perl variable name If C<'-'> is the first or last character in a character class, it is treated as an ordinary character; C<[-ab]>, C<[ab-]> and C<[a\-b]> are all equivalent. The special character C<'^'> in the first position of a character class denotes a I<negated character class>, which matches any character but those in the brackets. Both C<[...]> and C<[^...]> must match a character, or the match fails. Then /[^a]at/; # doesn't match 'aat' or 'at', but matches # all other 'bat', 'cat, '0at', '%at', etc. /[^0-9]/; # matches a non-numeric character /[a^]at/; # matches 'aat' or '^at'; here '^' is ordinary Now, even C<[0-9]> can be a bother to write multiple times, so in the interest of saving keystrokes and making regexps more readable, Perl has several abbreviations for common character classes, as shown below. Since the introduction of Unicode, unless the C</a> modifier is in effect, these character classes match more than just a few characters in the ASCII range. =over 4 =item * C<\d> matches a digit, not just C<[0-9]> but also digits from non-roman scripts =item * C<\s> matches a whitespace character, the set C<[\ \t\r\n\f]> and others =item * C<\w> matches a word character (alphanumeric or C<'_'>), not just C<[0-9a-zA-Z_]> but also digits and characters from non-roman scripts =item * C<\D> is a negated C<\d>; it represents any other character than a digit, or C<[^\d]> =item * C<\S> is a negated C<\s>; it represents any non-whitespace character C<[^\s]> =item * C<\W> is a negated C<\w>; it represents any non-word character C<[^\w]> =item * The period C<'.'> matches any character but C<"\n"> (unless the modifier C</s> is in effect, as explained below). =item * C<\N>, like the period, matches any character but C<"\n">, but it does so regardless of whether the modifier C</s> is in effect. =back The C</a> modifier, available starting in Perl 5.14, is used to restrict the matches of C<\d>, C<\s>, and C<\w> to just those in the ASCII range. It is useful to keep your program from being needlessly exposed to full Unicode (and its accompanying security considerations) when all you want is to process English-like text. (The "a" may be doubled, C</aa>, to provide even more restrictions, preventing case-insensitive matching of ASCII with non-ASCII characters; otherwise a Unicode "Kelvin Sign" would caselessly match a "k" or "K".) The C<\d\s\w\D\S\W> abbreviations can be used both inside and outside of bracketed character classes. Here are some in use: /\d\d:\d\d:\d\d/; # matches a hh:mm:ss time format /[\d\s]/; # matches any digit or whitespace character /\w\W\w/; # matches a word char, followed by a # non-word char, followed by a word char /..rt/; # matches any two chars, followed by 'rt' /end\./; # matches 'end.' /end[.]/; # same thing, matches 'end.' Because a period is a metacharacter, it needs to be escaped to match as an ordinary period. Because, for example, C<\d> and C<\w> are sets of characters, it is incorrect to think of C<[^\d\w]> as C<[\D\W]>; in fact C<[^\d\w]> is the same as C<[^\w]>, which is the same as C<[\W]>. Think DeMorgan's laws. In actuality, the period and C<\d\s\w\D\S\W> abbreviations are themselves types of character classes, so the ones surrounded by brackets are just one type of character class. When we need to make a distinction, we refer to them as "bracketed character classes." An anchor useful in basic regexps is the I<word anchor> C<\b>. This matches a boundary between a word character and a non-word character C<\w\W> or C<\W\w>: $x = "Housecat catenates house and cat"; $x =~ /cat/; # matches cat in 'housecat' $x =~ /\bcat/; # matches cat in 'catenates' $x =~ /cat\b/; # matches cat in 'housecat' $x =~ /\bcat\b/; # matches 'cat' at end of string Note in the last example, the end of the string is considered a word boundary. For natural language processing (so that, for example, apostrophes are included in words), use instead C<\b{wb}> "don't" =~ / .+? \b{wb} /x; # matches the whole string You might wonder why C<'.'> matches everything but C<"\n"> - why not every character? The reason is that often one is matching against lines and would like to ignore the newline characters. For instance, while the string C<"\n"> represents one line, we would like to think of it as empty. Then "" =~ /^$/; # matches "\n" =~ /^$/; # matches, $ anchors before "\n" "" =~ /./; # doesn't match; it needs a char "" =~ /^.$/; # doesn't match; it needs a char "\n" =~ /^.$/; # doesn't match; it needs a char other than "\n" "a" =~ /^.$/; # matches "a\n" =~ /^.$/; # matches, $ anchors before "\n" This behavior is convenient, because we usually want to ignore newlines when we count and match characters in a line. Sometimes, however, we want to keep track of newlines. We might even want C<'^'> and C<'$'> to anchor at the beginning and end of lines within the string, rather than just the beginning and end of the string. Perl allows us to choose between ignoring and paying attention to newlines by using the C</s> and C</m> modifiers. C</s> and C</m> stand for single line and multi-line and they determine whether a string is to be treated as one continuous string, or as a set of lines. The two modifiers affect two aspects of how the regexp is interpreted: 1) how the C<'.'> character class is defined, and 2) where the anchors C<'^'> and C<'$'> are able to match. Here are the four possible combinations: =over 4 =item * no modifiers: Default behavior. C<'.'> matches any character except C<"\n">. C<'^'> matches only at the beginning of the string and C<'$'> matches only at the end or before a newline at the end. =item * s modifier (C</s>): Treat string as a single long line. C<'.'> matches any character, even C<"\n">. C<'^'> matches only at the beginning of the string and C<'$'> matches only at the end or before a newline at the end. =item * m modifier (C</m>): Treat string as a set of multiple lines. C<'.'> matches any character except C<"\n">. C<'^'> and C<'$'> are able to match at the start or end of I<any> line within the string. =item * both s and m modifiers (C</sm>): Treat string as a single long line, but detect multiple lines. C<'.'> matches any character, even C<"\n">. C<'^'> and C<'$'>, however, are able to match at the start or end of I<any> line within the string. =back Here are examples of C</s> and C</m> in action: $x = "There once was a girl\nWho programmed in Perl\n"; $x =~ /^Who/; # doesn't match, "Who" not at start of string $x =~ /^Who/s; # doesn't match, "Who" not at start of string $x =~ /^Who/m; # matches, "Who" at start of second line $x =~ /^Who/sm; # matches, "Who" at start of second line $x =~ /girl.Who/; # doesn't match, "." doesn't match "\n" $x =~ /girl.Who/s; # matches, "." matches "\n" $x =~ /girl.Who/m; # doesn't match, "." doesn't match "\n" $x =~ /girl.Who/sm; # matches, "." matches "\n" Most of the time, the default behavior is what is wanted, but C</s> and C</m> are occasionally very useful. If C</m> is being used, the start of the string can still be matched with C<\A> and the end of the string can still be matched with the anchors C<\Z> (matches both the end and the newline before, like C<'$'>), and C<\z> (matches only the end): $x =~ /^Who/m; # matches, "Who" at start of second line $x =~ /\AWho/m; # doesn't match, "Who" is not at start of string $x =~ /girl$/m; # matches, "girl" at end of first line $x =~ /girl\Z/m; # doesn't match, "girl" is not at end of string $x =~ /Perl\Z/m; # matches, "Perl" is at newline before end $x =~ /Perl\z/m; # doesn't match, "Perl" is not at end of string We now know how to create choices among classes of characters in a regexp. What about choices among words or character strings? Such choices are described in the next section. =head2 Matching this or that Sometimes we would like our regexp to be able to match different possible words or character strings. This is accomplished by using the I<alternation> metacharacter C<'|'>. To match C<dog> or C<cat>, we form the regexp C<dog|cat>. As before, Perl will try to match the regexp at the earliest possible point in the string. At each character position, Perl will first try to match the first alternative, C<dog>. If C<dog> doesn't match, Perl will then try the next alternative, C<cat>. If C<cat> doesn't match either, then the match fails and Perl moves to the next position in the string. Some examples: "cats and dogs" =~ /cat|dog|bird/; # matches "cat" "cats and dogs" =~ /dog|cat|bird/; # matches "cat" Even though C<dog> is the first alternative in the second regexp, C<cat> is able to match earlier in the string. "cats" =~ /c|ca|cat|cats/; # matches "c" "cats" =~ /cats|cat|ca|c/; # matches "cats" Here, all the alternatives match at the first string position, so the first alternative is the one that matches. If some of the alternatives are truncations of the others, put the longest ones first to give them a chance to match. "cab" =~ /a|b|c/ # matches "c" # /a|b|c/ == /[abc]/ The last example points out that character classes are like alternations of characters. At a given character position, the first alternative that allows the regexp match to succeed will be the one that matches. =head2 Grouping things and hierarchical matching Alternation allows a regexp to choose among alternatives, but by itself it is unsatisfying. The reason is that each alternative is a whole regexp, but sometime we want alternatives for just part of a regexp. For instance, suppose we want to search for housecats or housekeepers. The regexp C<housecat|housekeeper> fits the bill, but is inefficient because we had to type C<house> twice. It would be nice to have parts of the regexp be constant, like C<house>, and some parts have alternatives, like C<cat|keeper>. The I<grouping> metacharacters C<()> solve this problem. Grouping allows parts of a regexp to be treated as a single unit. Parts of a regexp are grouped by enclosing them in parentheses. Thus we could solve the C<housecat|housekeeper> by forming the regexp as C<house(cat|keeper)>. The regexp C<house(cat|keeper)> means match C<house> followed by either C<cat> or C<keeper>. Some more examples are /(a|b)b/; # matches 'ab' or 'bb' /(ac|b)b/; # matches 'acb' or 'bb' /(^a|b)c/; # matches 'ac' at start of string or 'bc' anywhere /(a|[bc])d/; # matches 'ad', 'bd', or 'cd' /house(cat|)/; # matches either 'housecat' or 'house' /house(cat(s|)|)/; # matches either 'housecats' or 'housecat' or # 'house'. Note groups can be nested. /(19|20|)\d\d/; # match years 19xx, 20xx, or the Y2K problem, xx "20" =~ /(19|20|)\d\d/; # matches the null alternative '()\d\d', # because '20\d\d' can't match Alternations behave the same way in groups as out of them: at a given string position, the leftmost alternative that allows the regexp to match is taken. So in the last example at the first string position, C<"20"> matches the second alternative, but there is nothing left over to match the next two digits C<\d\d>. So Perl moves on to the next alternative, which is the null alternative and that works, since C<"20"> is two digits. The process of trying one alternative, seeing if it matches, and moving on to the next alternative, while going back in the string from where the previous alternative was tried, if it doesn't, is called I<backtracking>. The term "backtracking" comes from the idea that matching a regexp is like a walk in the woods. Successfully matching a regexp is like arriving at a destination. There are many possible trailheads, one for each string position, and each one is tried in order, left to right. From each trailhead there may be many paths, some of which get you there, and some which are dead ends. When you walk along a trail and hit a dead end, you have to backtrack along the trail to an earlier point to try another trail. If you hit your destination, you stop immediately and forget about trying all the other trails. You are persistent, and only if you have tried all the trails from all the trailheads and not arrived at your destination, do you declare failure. To be concrete, here is a step-by-step analysis of what Perl does when it tries to match the regexp "abcde" =~ /(abd|abc)(df|d|de)/; =over 4 =item Z<>0. Start with the first letter in the string C<'a'>. E<nbsp> =item Z<>1. Try the first alternative in the first group C<'abd'>. E<nbsp> =item Z<>2. Match C<'a'> followed by C<'b'>. So far so good. E<nbsp> =item Z<>3. C<'d'> in the regexp doesn't match C<'c'> in the string - a dead end. So backtrack two characters and pick the second alternative in the first group C<'abc'>. E<nbsp> =item Z<>4. Match C<'a'> followed by C<'b'> followed by C<'c'>. We are on a roll and have satisfied the first group. Set C<$1> to C<'abc'>. E<nbsp> =item Z<>5 Move on to the second group and pick the first alternative C<'df'>. E<nbsp> =item Z<>6 Match the C<'d'>. E<nbsp> =item Z<>7. C<'f'> in the regexp doesn't match C<'e'> in the string, so a dead end. Backtrack one character and pick the second alternative in the second group C<'d'>. E<nbsp> =item Z<>8. C<'d'> matches. The second grouping is satisfied, so set C<$2> to C<'d'>. E<nbsp> =item Z<>9. We are at the end of the regexp, so we are done! We have matched C<'abcd'> out of the string C<"abcde">. =back There are a couple of things to note about this analysis. First, the third alternative in the second group C<'de'> also allows a match, but we stopped before we got to it - at a given character position, leftmost wins. Second, we were able to get a match at the first character position of the string C<'a'>. If there were no matches at the first position, Perl would move to the second character position C<'b'> and attempt the match all over again. Only when all possible paths at all possible character positions have been exhausted does Perl give up and declare S<C<$string =~ /(abd|abc)(df|d|de)/;>> to be false. Even with all this work, regexp matching happens remarkably fast. To speed things up, Perl compiles the regexp into a compact sequence of opcodes that can often fit inside a processor cache. When the code is executed, these opcodes can then run at full throttle and search very quickly. =head2 Extracting matches The grouping metacharacters C<()> also serve another completely different function: they allow the extraction of the parts of a string that matched. This is very useful to find out what matched and for text processing in general. For each grouping, the part that matched inside goes into the special variables C<$1>, C<$2>, I<etc>. They can be used just as ordinary variables: # extract hours, minutes, seconds if ($time =~ /(\d\d):(\d\d):(\d\d)/) { # match hh:mm:ss format $hours = $1; $minutes = $2; $seconds = $3; } Now, we know that in scalar context, S<C<$time =~ /(\d\d):(\d\d):(\d\d)/>> returns a true or false value. In list context, however, it returns the list of matched values C<($1,$2,$3)>. So we could write the code more compactly as # extract hours, minutes, seconds ($hours, $minutes, $second) = ($time =~ /(\d\d):(\d\d):(\d\d)/); If the groupings in a regexp are nested, C<$1> gets the group with the leftmost opening parenthesis, C<$2> the next opening parenthesis, I<etc>. Here is a regexp with nested groups: /(ab(cd|ef)((gi)|j))/; 1 2 34 If this regexp matches, C<$1> contains a string starting with C<'ab'>, C<$2> is either set to C<'cd'> or C<'ef'>, C<$3> equals either C<'gi'> or C<'j'>, and C<$4> is either set to C<'gi'>, just like C<$3>, or it remains undefined. For convenience, Perl sets C<$+> to the string held by the highest numbered C<$1>, C<$2>,... that got assigned (and, somewhat related, C<$^N> to the value of the C<$1>, C<$2>,... most-recently assigned; I<i.e.> the C<$1>, C<$2>,... associated with the rightmost closing parenthesis used in the match). =head2 Backreferences Closely associated with the matching variables C<$1>, C<$2>, ... are the I<backreferences> C<\g1>, C<\g2>,... Backreferences are simply matching variables that can be used I<inside> a regexp. This is a really nice feature; what matches later in a regexp is made to depend on what matched earlier in the regexp. Suppose we wanted to look for doubled words in a text, like "the the". The following regexp finds all 3-letter doubles with a space in between: /\b(\w\w\w)\s\g1\b/; The grouping assigns a value to C<\g1>, so that the same 3-letter sequence is used for both parts. A similar task is to find words consisting of two identical parts: % simple_grep '^(\w\w\w\w|\w\w\w|\w\w|\w)\g1$' /usr/dict/words beriberi booboo coco mama murmur papa The regexp has a single grouping which considers 4-letter combinations, then 3-letter combinations, I<etc>., and uses C<\g1> to look for a repeat. Although C<$1> and C<\g1> represent the same thing, care should be taken to use matched variables C<$1>, C<$2>,... only I<outside> a regexp and backreferences C<\g1>, C<\g2>,... only I<inside> a regexp; not doing so may lead to surprising and unsatisfactory results. =head2 Relative backreferences Counting the opening parentheses to get the correct number for a backreference is error-prone as soon as there is more than one capturing group. A more convenient technique became available with Perl 5.10: relative backreferences. To refer to the immediately preceding capture group one now may write C<\g{-1}>, the next but last is available via C<\g{-2}>, and so on. Another good reason in addition to readability and maintainability for using relative backreferences is illustrated by the following example, where a simple pattern for matching peculiar strings is used: $a99a = '([a-z])(\d)\g2\g1'; # matches a11a, g22g, x33x, etc. Now that we have this pattern stored as a handy string, we might feel tempted to use it as a part of some other pattern: $line = "code=e99e"; if ($line =~ /^(\w+)=$a99a$/){ # unexpected behavior! print "$1 is valid\n"; } else { print "bad line: '$line'\n"; } But this doesn't match, at least not the way one might expect. Only after inserting the interpolated C<$a99a> and looking at the resulting full text of the regexp is it obvious that the backreferences have backfired. The subexpression C<(\w+)> has snatched number 1 and demoted the groups in C<$a99a> by one rank. This can be avoided by using relative backreferences: $a99a = '([a-z])(\d)\g{-1}\g{-2}'; # safe for being interpolated =head2 Named backreferences Perl 5.10 also introduced named capture groups and named backreferences. To attach a name to a capturing group, you write either C<< (?<name>...) >> or C<< (?'name'...) >>. The backreference may then be written as C<\g{name}>. It is permissible to attach the same name to more than one group, but then only the leftmost one of the eponymous set can be referenced. Outside of the pattern a named capture group is accessible through the C<%+> hash. Assuming that we have to match calendar dates which may be given in one of the three formats yyyy-mm-dd, mm/dd/yyyy or dd.mm.yyyy, we can write three suitable patterns where we use C<'d'>, C<'m'> and C<'y'> respectively as the names of the groups capturing the pertaining components of a date. The matching operation combines the three patterns as alternatives: $fmt1 = '(?<y>\d\d\d\d)-(?<m>\d\d)-(?<d>\d\d)'; $fmt2 = '(?<m>\d\d)/(?<d>\d\d)/(?<y>\d\d\d\d)'; $fmt3 = '(?<d>\d\d)\.(?<m>\d\d)\.(?<y>\d\d\d\d)'; for my $d (qw(2006-10-21 15.01.2007 10/31/2005)) { if ( $d =~ m{$fmt1|$fmt2|$fmt3} ){ print "day=$+{d} month=$+{m} year=$+{y}\n"; } } If any of the alternatives matches, the hash C<%+> is bound to contain the three key-value pairs. =head2 Alternative capture group numbering Yet another capturing group numbering technique (also as from Perl 5.10) deals with the problem of referring to groups within a set of alternatives. Consider a pattern for matching a time of the day, civil or military style: if ( $time =~ /(\d\d|\d):(\d\d)|(\d\d)(\d\d)/ ){ # process hour and minute } Processing the results requires an additional if statement to determine whether C<$1> and C<$2> or C<$3> and C<$4> contain the goodies. It would be easier if we could use group numbers 1 and 2 in second alternative as well, and this is exactly what the parenthesized construct C<(?|...)>, set around an alternative achieves. Here is an extended version of the previous pattern: if($time =~ /(?|(\d\d|\d):(\d\d)|(\d\d)(\d\d))\s+([A-Z][A-Z][A-Z])/){ print "hour=$1 minute=$2 zone=$3\n"; } Within the alternative numbering group, group numbers start at the same position for each alternative. After the group, numbering continues with one higher than the maximum reached across all the alternatives. =head2 Position information In addition to what was matched, Perl also provides the positions of what was matched as contents of the C<@-> and C<@+> arrays. C<$-[0]> is the position of the start of the entire match and C<$+[0]> is the position of the end. Similarly, C<$-[n]> is the position of the start of the C<$n> match and C<$+[n]> is the position of the end. If C<$n> is undefined, so are C<$-[n]> and C<$+[n]>. Then this code $x = "Mmm...donut, thought Homer"; $x =~ /^(Mmm|Yech)\.\.\.(donut|peas)/; # matches foreach $exp (1..$#-) { print "Match $exp: '${$exp}' at position ($-[$exp],$+[$exp])\n"; } prints Match 1: 'Mmm' at position (0,3) Match 2: 'donut' at position (6,11) Even if there are no groupings in a regexp, it is still possible to find out what exactly matched in a string. If you use them, Perl will set C<$`> to the part of the string before the match, will set C<$&> to the part of the string that matched, and will set C<$'> to the part of the string after the match. An example: $x = "the cat caught the mouse"; $x =~ /cat/; # $` = 'the ', $& = 'cat', $' = ' caught the mouse' $x =~ /the/; # $` = '', $& = 'the', $' = ' cat caught the mouse' In the second match, C<$`> equals C<''> because the regexp matched at the first character position in the string and stopped; it never saw the second "the". If your code is to run on Perl versions earlier than 5.20, it is worthwhile to note that using C<$`> and C<$'> slows down regexp matching quite a bit, while C<$&> slows it down to a lesser extent, because if they are used in one regexp in a program, they are generated for I<all> regexps in the program. So if raw performance is a goal of your application, they should be avoided. If you need to extract the corresponding substrings, use C<@-> and C<@+> instead: $` is the same as substr( $x, 0, $-[0] ) $& is the same as substr( $x, $-[0], $+[0]-$-[0] ) $' is the same as substr( $x, $+[0] ) As of Perl 5.10, the C<${^PREMATCH}>, C<${^MATCH}> and C<${^POSTMATCH}> variables may be used. These are only set if the C</p> modifier is present. Consequently they do not penalize the rest of the program. In Perl 5.20, C<${^PREMATCH}>, C<${^MATCH}> and C<${^POSTMATCH}> are available whether the C</p> has been used or not (the modifier is ignored), and C<$`>, C<$'> and C<$&> do not cause any speed difference. =head2 Non-capturing groupings A group that is required to bundle a set of alternatives may or may not be useful as a capturing group. If it isn't, it just creates a superfluous addition to the set of available capture group values, inside as well as outside the regexp. Non-capturing groupings, denoted by C<(?:regexp)>, still allow the regexp to be treated as a single unit, but don't establish a capturing group at the same time. Both capturing and non-capturing groupings are allowed to co-exist in the same regexp. Because there is no extraction, non-capturing groupings are faster than capturing groupings. Non-capturing groupings are also handy for choosing exactly which parts of a regexp are to be extracted to matching variables: # match a number, $1-$4 are set, but we only want $1 /([+-]?\ *(\d+(\.\d*)?|\.\d+)([eE][+-]?\d+)?)/; # match a number faster , only $1 is set /([+-]?\ *(?:\d+(?:\.\d*)?|\.\d+)(?:[eE][+-]?\d+)?)/; # match a number, get $1 = whole number, $2 = exponent /([+-]?\ *(?:\d+(?:\.\d*)?|\.\d+)(?:[eE]([+-]?\d+))?)/; Non-capturing groupings are also useful for removing nuisance elements gathered from a split operation where parentheses are required for some reason: $x = '12aba34ba5'; @num = split /(a|b)+/, $x; # @num = ('12','a','34','a','5') @num = split /(?:a|b)+/, $x; # @num = ('12','34','5') In Perl 5.22 and later, all groups within a regexp can be set to non-capturing by using the new C</n> flag: "hello" =~ /(hi|hello)/n; # $1 is not set! See L<perlre/"n"> for more information. =head2 Matching repetitions The examples in the previous section display an annoying weakness. We were only matching 3-letter words, or chunks of words of 4 letters or less. We'd like to be able to match words or, more generally, strings of any length, without writing out tedious alternatives like C<\w\w\w\w|\w\w\w|\w\w|\w>. This is exactly the problem the I<quantifier> metacharacters C<'?'>, C<'*'>, C<'+'>, and C<{}> were created for. They allow us to delimit the number of repeats for a portion of a regexp we consider to be a match. Quantifiers are put immediately after the character, character class, or grouping that we want to specify. They have the following meanings: =over 4 =item * C<a?> means: match C<'a'> 1 or 0 times =item * C<a*> means: match C<'a'> 0 or more times, I<i.e.>, any number of times =item * C<a+> means: match C<'a'> 1 or more times, I<i.e.>, at least once =item * C<a{n,m}> means: match at least C<n> times, but not more than C<m> times. =item * C<a{n,}> means: match at least C<n> or more times =item * C<a{n}> means: match exactly C<n> times =back Here are some examples: /[a-z]+\s+\d*/; # match a lowercase word, at least one space, and # any number of digits /(\w+)\s+\g1/; # match doubled words of arbitrary length /y(es)?/i; # matches 'y', 'Y', or a case-insensitive 'yes' $year =~ /^\d{2,4}$/; # make sure year is at least 2 but not more # than 4 digits $year =~ /^\d{4}$|^\d{2}$/; # better match; throw out 3-digit dates $year =~ /^\d{2}(\d{2})?$/; # same thing written differently. # However, this captures the last two # digits in $1 and the other does not. % simple_grep '^(\w+)\g1$' /usr/dict/words # isn't this easier? beriberi booboo coco mama murmur papa For all of these quantifiers, Perl will try to match as much of the string as possible, while still allowing the regexp to succeed. Thus with C</a?.../>, Perl will first try to match the regexp with the C<'a'> present; if that fails, Perl will try to match the regexp without the C<'a'> present. For the quantifier C<'*'>, we get the following: $x = "the cat in the hat"; $x =~ /^(.*)(cat)(.*)$/; # matches, # $1 = 'the ' # $2 = 'cat' # $3 = ' in the hat' Which is what we might expect, the match finds the only C<cat> in the string and locks onto it. Consider, however, this regexp: $x =~ /^(.*)(at)(.*)$/; # matches, # $1 = 'the cat in the h' # $2 = 'at' # $3 = '' (0 characters match) One might initially guess that Perl would find the C<at> in C<cat> and stop there, but that wouldn't give the longest possible string to the first quantifier C<.*>. Instead, the first quantifier C<.*> grabs as much of the string as possible while still having the regexp match. In this example, that means having the C<at> sequence with the final C<at> in the string. The other important principle illustrated here is that, when there are two or more elements in a regexp, the I<leftmost> quantifier, if there is one, gets to grab as much of the string as possible, leaving the rest of the regexp to fight over scraps. Thus in our example, the first quantifier C<.*> grabs most of the string, while the second quantifier C<.*> gets the empty string. Quantifiers that grab as much of the string as possible are called I<maximal match> or I<greedy> quantifiers. When a regexp can match a string in several different ways, we can use the principles above to predict which way the regexp will match: =over 4 =item * Principle 0: Taken as a whole, any regexp will be matched at the earliest possible position in the string. =item * Principle 1: In an alternation C<a|b|c...>, the leftmost alternative that allows a match for the whole regexp will be the one used. =item * Principle 2: The maximal matching quantifiers C<'?'>, C<'*'>, C<'+'> and C<{n,m}> will in general match as much of the string as possible while still allowing the whole regexp to match. =item * Principle 3: If there are two or more elements in a regexp, the leftmost greedy quantifier, if any, will match as much of the string as possible while still allowing the whole regexp to match. The next leftmost greedy quantifier, if any, will try to match as much of the string remaining available to it as possible, while still allowing the whole regexp to match. And so on, until all the regexp elements are satisfied. =back As we have seen above, Principle 0 overrides the others. The regexp will be matched as early as possible, with the other principles determining how the regexp matches at that earliest character position. Here is an example of these principles in action: $x = "The programming republic of Perl"; $x =~ /^(.+)(e|r)(.*)$/; # matches, # $1 = 'The programming republic of Pe' # $2 = 'r' # $3 = 'l' This regexp matches at the earliest string position, C<'T'>. One might think that C<'e'>, being leftmost in the alternation, would be matched, but C<'r'> produces the longest string in the first quantifier. $x =~ /(m{1,2})(.*)$/; # matches, # $1 = 'mm' # $2 = 'ing republic of Perl' Here, The earliest possible match is at the first C<'m'> in C<programming>. C<m{1,2}> is the first quantifier, so it gets to match a maximal C<mm>. $x =~ /.*(m{1,2})(.*)$/; # matches, # $1 = 'm' # $2 = 'ing republic of Perl' Here, the regexp matches at the start of the string. The first quantifier C<.*> grabs as much as possible, leaving just a single C<'m'> for the second quantifier C<m{1,2}>. $x =~ /(.?)(m{1,2})(.*)$/; # matches, # $1 = 'a' # $2 = 'mm' # $3 = 'ing republic of Perl' Here, C<.?> eats its maximal one character at the earliest possible position in the string, C<'a'> in C<programming>, leaving C<m{1,2}> the opportunity to match both C<'m'>'s. Finally, "aXXXb" =~ /(X*)/; # matches with $1 = '' because it can match zero copies of C<'X'> at the beginning of the string. If you definitely want to match at least one C<'X'>, use C<X+>, not C<X*>. Sometimes greed is not good. At times, we would like quantifiers to match a I<minimal> piece of string, rather than a maximal piece. For this purpose, Larry Wall created the I<minimal match> or I<non-greedy> quantifiers C<??>, C<*?>, C<+?>, and C<{}?>. These are the usual quantifiers with a C<'?'> appended to them. They have the following meanings: =over 4 =item * C<a??> means: match C<'a'> 0 or 1 times. Try 0 first, then 1. =item * C<a*?> means: match C<'a'> 0 or more times, I<i.e.>, any number of times, but as few times as possible =item * C<a+?> means: match C<'a'> 1 or more times, I<i.e.>, at least once, but as few times as possible =item * C<a{n,m}?> means: match at least C<n> times, not more than C<m> times, as few times as possible =item * C<a{n,}?> means: match at least C<n> times, but as few times as possible =item * C<a{n}?> means: match exactly C<n> times. Because we match exactly C<n> times, C<a{n}?> is equivalent to C<a{n}> and is just there for notational consistency. =back Let's look at the example above, but with minimal quantifiers: $x = "The programming republic of Perl"; $x =~ /^(.+?)(e|r)(.*)$/; # matches, # $1 = 'Th' # $2 = 'e' # $3 = ' programming republic of Perl' The minimal string that will allow both the start of the string C<'^'> and the alternation to match is C<Th>, with the alternation C<e|r> matching C<'e'>. The second quantifier C<.*> is free to gobble up the rest of the string. $x =~ /(m{1,2}?)(.*?)$/; # matches, # $1 = 'm' # $2 = 'ming republic of Perl' The first string position that this regexp can match is at the first C<'m'> in C<programming>. At this position, the minimal C<m{1,2}?> matches just one C<'m'>. Although the second quantifier C<.*?> would prefer to match no characters, it is constrained by the end-of-string anchor C<'$'> to match the rest of the string. $x =~ /(.*?)(m{1,2}?)(.*)$/; # matches, # $1 = 'The progra' # $2 = 'm' # $3 = 'ming republic of Perl' In this regexp, you might expect the first minimal quantifier C<.*?> to match the empty string, because it is not constrained by a C<'^'> anchor to match the beginning of the word. Principle 0 applies here, however. Because it is possible for the whole regexp to match at the start of the string, it I<will> match at the start of the string. Thus the first quantifier has to match everything up to the first C<'m'>. The second minimal quantifier matches just one C<'m'> and the third quantifier matches the rest of the string. $x =~ /(.??)(m{1,2})(.*)$/; # matches, # $1 = 'a' # $2 = 'mm' # $3 = 'ing republic of Perl' Just as in the previous regexp, the first quantifier C<.??> can match earliest at position C<'a'>, so it does. The second quantifier is greedy, so it matches C<mm>, and the third matches the rest of the string. We can modify principle 3 above to take into account non-greedy quantifiers: =over 4 =item * Principle 3: If there are two or more elements in a regexp, the leftmost greedy (non-greedy) quantifier, if any, will match as much (little) of the string as possible while still allowing the whole regexp to match. The next leftmost greedy (non-greedy) quantifier, if any, will try to match as much (little) of the string remaining available to it as possible, while still allowing the whole regexp to match. And so on, until all the regexp elements are satisfied. =back Just like alternation, quantifiers are also susceptible to backtracking. Here is a step-by-step analysis of the example $x = "the cat in the hat"; $x =~ /^(.*)(at)(.*)$/; # matches, # $1 = 'the cat in the h' # $2 = 'at' # $3 = '' (0 matches) =over 4 =item Z<>0. Start with the first letter in the string C<'t'>. E<nbsp> =item Z<>1. The first quantifier C<'.*'> starts out by matching the whole string "C<the cat in the hat>". E<nbsp> =item Z<>2. C<'a'> in the regexp element C<'at'> doesn't match the end of the string. Backtrack one character. E<nbsp> =item Z<>3. C<'a'> in the regexp element C<'at'> still doesn't match the last letter of the string C<'t'>, so backtrack one more character. E<nbsp> =item Z<>4. Now we can match the C<'a'> and the C<'t'>. E<nbsp> =item Z<>5. Move on to the third element C<'.*'>. Since we are at the end of the string and C<'.*'> can match 0 times, assign it the empty string. E<nbsp> =item Z<>6. We are done! =back Most of the time, all this moving forward and backtracking happens quickly and searching is fast. There are some pathological regexps, however, whose execution time exponentially grows with the size of the string. A typical structure that blows up in your face is of the form /(a|b+)*/; The problem is the nested indeterminate quantifiers. There are many different ways of partitioning a string of length n between the C<'+'> and C<'*'>: one repetition with C<b+> of length n, two repetitions with the first C<b+> length k and the second with length n-k, m repetitions whose bits add up to length n, I<etc>. In fact there are an exponential number of ways to partition a string as a function of its length. A regexp may get lucky and match early in the process, but if there is no match, Perl will try I<every> possibility before giving up. So be careful with nested C<'*'>'s, C<{n,m}>'s, and C<'+'>'s. The book I<Mastering Regular Expressions> by Jeffrey Friedl gives a wonderful discussion of this and other efficiency issues. =head2 Possessive quantifiers Backtracking during the relentless search for a match may be a waste of time, particularly when the match is bound to fail. Consider the simple pattern /^\w+\s+\w+$/; # a word, spaces, a word Whenever this is applied to a string which doesn't quite meet the pattern's expectations such as S<C<"abc ">> or S<C<"abc def ">>, the regexp engine will backtrack, approximately once for each character in the string. But we know that there is no way around taking I<all> of the initial word characters to match the first repetition, that I<all> spaces must be eaten by the middle part, and the same goes for the second word. With the introduction of the I<possessive quantifiers> in Perl 5.10, we have a way of instructing the regexp engine not to backtrack, with the usual quantifiers with a C<'+'> appended to them. This makes them greedy as well as stingy; once they succeed they won't give anything back to permit another solution. They have the following meanings: =over 4 =item * C<a{n,m}+> means: match at least C<n> times, not more than C<m> times, as many times as possible, and don't give anything up. C<a?+> is short for C<a{0,1}+> =item * C<a{n,}+> means: match at least C<n> times, but as many times as possible, and don't give anything up. C<a*+> is short for C<a{0,}+> and C<a++> is short for C<a{1,}+>. =item * C<a{n}+> means: match exactly C<n> times. It is just there for notational consistency. =back These possessive quantifiers represent a special case of a more general concept, the I<independent subexpression>, see below. As an example where a possessive quantifier is suitable we consider matching a quoted string, as it appears in several programming languages. The backslash is used as an escape character that indicates that the next character is to be taken literally, as another character for the string. Therefore, after the opening quote, we expect a (possibly empty) sequence of alternatives: either some character except an unescaped quote or backslash or an escaped character. /"(?:[^"\\]++|\\.)*+"/; =head2 Building a regexp At this point, we have all the basic regexp concepts covered, so let's give a more involved example of a regular expression. We will build a regexp that matches numbers. The first task in building a regexp is to decide what we want to match and what we want to exclude. In our case, we want to match both integers and floating point numbers and we want to reject any string that isn't a number. The next task is to break the problem down into smaller problems that are easily converted into a regexp. The simplest case is integers. These consist of a sequence of digits, with an optional sign in front. The digits we can represent with C<\d+> and the sign can be matched with C<[+-]>. Thus the integer regexp is /[+-]?\d+/; # matches integers A floating point number potentially has a sign, an integral part, a decimal point, a fractional part, and an exponent. One or more of these parts is optional, so we need to check out the different possibilities. Floating point numbers which are in proper form include 123., 0.345, .34, -1e6, and 25.4E-72. As with integers, the sign out front is completely optional and can be matched by C<[+-]?>. We can see that if there is no exponent, floating point numbers must have a decimal point, otherwise they are integers. We might be tempted to model these with C<\d*\.\d*>, but this would also match just a single decimal point, which is not a number. So the three cases of floating point number without exponent are /[+-]?\d+\./; # 1., 321., etc. /[+-]?\.\d+/; # .1, .234, etc. /[+-]?\d+\.\d+/; # 1.0, 30.56, etc. These can be combined into a single regexp with a three-way alternation: /[+-]?(\d+\.\d+|\d+\.|\.\d+)/; # floating point, no exponent In this alternation, it is important to put C<'\d+\.\d+'> before C<'\d+\.'>. If C<'\d+\.'> were first, the regexp would happily match that and ignore the fractional part of the number. Now consider floating point numbers with exponents. The key observation here is that I<both> integers and numbers with decimal points are allowed in front of an exponent. Then exponents, like the overall sign, are independent of whether we are matching numbers with or without decimal points, and can be "decoupled" from the mantissa. The overall form of the regexp now becomes clear: /^(optional sign)(integer | f.p. mantissa)(optional exponent)$/; The exponent is an C<'e'> or C<'E'>, followed by an integer. So the exponent regexp is /[eE][+-]?\d+/; # exponent Putting all the parts together, we get a regexp that matches numbers: /^[+-]?(\d+\.\d+|\d+\.|\.\d+|\d+)([eE][+-]?\d+)?$/; # Ta da! Long regexps like this may impress your friends, but can be hard to decipher. In complex situations like this, the C</x> modifier for a match is invaluable. It allows one to put nearly arbitrary whitespace and comments into a regexp without affecting their meaning. Using it, we can rewrite our "extended" regexp in the more pleasing form /^ [+-]? # first, match an optional sign ( # then match integers or f.p. mantissas: \d+\.\d+ # mantissa of the form a.b |\d+\. # mantissa of the form a. |\.\d+ # mantissa of the form .b |\d+ # integer of the form a ) ( [eE] [+-]? \d+ )? # finally, optionally match an exponent $/x; If whitespace is mostly irrelevant, how does one include space characters in an extended regexp? The answer is to backslash it S<C<'\ '>> or put it in a character class S<C<[ ]>>. The same thing goes for pound signs: use C<\#> or C<[#]>. For instance, Perl allows a space between the sign and the mantissa or integer, and we could add this to our regexp as follows: /^ [+-]?\ * # first, match an optional sign *and space* ( # then match integers or f.p. mantissas: \d+\.\d+ # mantissa of the form a.b |\d+\. # mantissa of the form a. |\.\d+ # mantissa of the form .b |\d+ # integer of the form a ) ( [eE] [+-]? \d+ )? # finally, optionally match an exponent $/x; In this form, it is easier to see a way to simplify the alternation. Alternatives 1, 2, and 4 all start with C<\d+>, so it could be factored out: /^ [+-]?\ * # first, match an optional sign ( # then match integers or f.p. mantissas: \d+ # start out with a ... ( \.\d* # mantissa of the form a.b or a. )? # ? takes care of integers of the form a |\.\d+ # mantissa of the form .b ) ( [eE] [+-]? \d+ )? # finally, optionally match an exponent $/x; Starting in Perl v5.26, specifying C</xx> changes the square-bracketed portions of a pattern to ignore tabs and space characters unless they are escaped by preceding them with a backslash. So, we could write /^ [ + - ]?\ * # first, match an optional sign ( # then match integers or f.p. mantissas: \d+ # start out with a ... ( \.\d* # mantissa of the form a.b or a. )? # ? takes care of integers of the form a |\.\d+ # mantissa of the form .b ) ( [ e E ] [ + - ]? \d+ )? # finally, optionally match an exponent $/xx; This doesn't really improve the legibility of this example, but it's available in case you want it. Squashing the pattern down to the compact form, we have /^[+-]?\ *(\d+(\.\d*)?|\.\d+)([eE][+-]?\d+)?$/; This is our final regexp. To recap, we built a regexp by =over 4 =item * specifying the task in detail, =item * breaking down the problem into smaller parts, =item * translating the small parts into regexps, =item * combining the regexps, =item * and optimizing the final combined regexp. =back These are also the typical steps involved in writing a computer program. This makes perfect sense, because regular expressions are essentially programs written in a little computer language that specifies patterns. =head2 Using regular expressions in Perl The last topic of Part 1 briefly covers how regexps are used in Perl programs. Where do they fit into Perl syntax? We have already introduced the matching operator in its default C</regexp/> and arbitrary delimiter C<m!regexp!> forms. We have used the binding operator C<=~> and its negation C<!~> to test for string matches. Associated with the matching operator, we have discussed the single line C</s>, multi-line C</m>, case-insensitive C</i> and extended C</x> modifiers. There are a few more things you might want to know about matching operators. =head3 Prohibiting substitution If you change C<$pattern> after the first substitution happens, Perl will ignore it. If you don't want any substitutions at all, use the special delimiter C<m''>: @pattern = ('Seuss'); while (<>) { print if m'@pattern'; # matches literal '@pattern', not 'Seuss' } Similar to strings, C<m''> acts like apostrophes on a regexp; all other C<'m'> delimiters act like quotes. If the regexp evaluates to the empty string, the regexp in the I<last successful match> is used instead. So we have "dog" =~ /d/; # 'd' matches "dogbert" =~ //; # this matches the 'd' regexp used before =head3 Global matching The final two modifiers we will discuss here, C</g> and C</c>, concern multiple matches. The modifier C</g> stands for global matching and allows the matching operator to match within a string as many times as possible. In scalar context, successive invocations against a string will have C</g> jump from match to match, keeping track of position in the string as it goes along. You can get or set the position with the C<pos()> function. The use of C</g> is shown in the following example. Suppose we have a string that consists of words separated by spaces. If we know how many words there are in advance, we could extract the words using groupings: $x = "cat dog house"; # 3 words $x =~ /^\s*(\w+)\s+(\w+)\s+(\w+)\s*$/; # matches, # $1 = 'cat' # $2 = 'dog' # $3 = 'house' But what if we had an indeterminate number of words? This is the sort of task C</g> was made for. To extract all words, form the simple regexp C<(\w+)> and loop over all matches with C</(\w+)/g>: while ($x =~ /(\w+)/g) { print "Word is $1, ends at position ", pos $x, "\n"; } prints Word is cat, ends at position 3 Word is dog, ends at position 7 Word is house, ends at position 13 A failed match or changing the target string resets the position. If you don't want the position reset after failure to match, add the C</c>, as in C</regexp/gc>. The current position in the string is associated with the string, not the regexp. This means that different strings have different positions and their respective positions can be set or read independently. In list context, C</g> returns a list of matched groupings, or if there are no groupings, a list of matches to the whole regexp. So if we wanted just the words, we could use @words = ($x =~ /(\w+)/g); # matches, # $words[0] = 'cat' # $words[1] = 'dog' # $words[2] = 'house' Closely associated with the C</g> modifier is the C<\G> anchor. The C<\G> anchor matches at the point where the previous C</g> match left off. C<\G> allows us to easily do context-sensitive matching: $metric = 1; # use metric units ... $x = <FILE>; # read in measurement $x =~ /^([+-]?\d+)\s*/g; # get magnitude $weight = $1; if ($metric) { # error checking print "Units error!" unless $x =~ /\Gkg\./g; } else { print "Units error!" unless $x =~ /\Glbs\./g; } $x =~ /\G\s+(widget|sprocket)/g; # continue processing The combination of C</g> and C<\G> allows us to process the string a bit at a time and use arbitrary Perl logic to decide what to do next. Currently, the C<\G> anchor is only fully supported when used to anchor to the start of the pattern. C<\G> is also invaluable in processing fixed-length records with regexps. Suppose we have a snippet of coding region DNA, encoded as base pair letters C<ATCGTTGAAT...> and we want to find all the stop codons C<TGA>. In a coding region, codons are 3-letter sequences, so we can think of the DNA snippet as a sequence of 3-letter records. The naive regexp # expanded, this is "ATC GTT GAA TGC AAA TGA CAT GAC" $dna = "ATCGTTGAATGCAAATGACATGAC"; $dna =~ /TGA/; doesn't work; it may match a C<TGA>, but there is no guarantee that the match is aligned with codon boundaries, I<e.g.>, the substring S<C<GTT GAA>> gives a match. A better solution is while ($dna =~ /(\w\w\w)*?TGA/g) { # note the minimal *? print "Got a TGA stop codon at position ", pos $dna, "\n"; } which prints Got a TGA stop codon at position 18 Got a TGA stop codon at position 23 Position 18 is good, but position 23 is bogus. What happened? The answer is that our regexp works well until we get past the last real match. Then the regexp will fail to match a synchronized C<TGA> and start stepping ahead one character position at a time, not what we want. The solution is to use C<\G> to anchor the match to the codon alignment: while ($dna =~ /\G(\w\w\w)*?TGA/g) { print "Got a TGA stop codon at position ", pos $dna, "\n"; } This prints Got a TGA stop codon at position 18 which is the correct answer. This example illustrates that it is important not only to match what is desired, but to reject what is not desired. (There are other regexp modifiers that are available, such as C</o>, but their specialized uses are beyond the scope of this introduction. ) =head3 Search and replace Regular expressions also play a big role in I<search and replace> operations in Perl. Search and replace is accomplished with the C<s///> operator. The general form is C<s/regexp/replacement/modifiers>, with everything we know about regexps and modifiers applying in this case as well. The I<replacement> is a Perl double-quoted string that replaces in the string whatever is matched with the C<regexp>. The operator C<=~> is also used here to associate a string with C<s///>. If matching against C<$_>, the S<C<$_ =~>> can be dropped. If there is a match, C<s///> returns the number of substitutions made; otherwise it returns false. Here are a few examples: $x = "Time to feed the cat!"; $x =~ s/cat/hacker/; # $x contains "Time to feed the hacker!" if ($x =~ s/^(Time.*hacker)!$/$1 now!/) { $more_insistent = 1; } $y = "'quoted words'"; $y =~ s/^'(.*)'$/$1/; # strip single quotes, # $y contains "quoted words" In the last example, the whole string was matched, but only the part inside the single quotes was grouped. With the C<s///> operator, the matched variables C<$1>, C<$2>, I<etc>. are immediately available for use in the replacement expression, so we use C<$1> to replace the quoted string with just what was quoted. With the global modifier, C<s///g> will search and replace all occurrences of the regexp in the string: $x = "I batted 4 for 4"; $x =~ s/4/four/; # doesn't do it all: # $x contains "I batted four for 4" $x = "I batted 4 for 4"; $x =~ s/4/four/g; # does it all: # $x contains "I batted four for four" If you prefer "regex" over "regexp" in this tutorial, you could use the following program to replace it: % cat > simple_replace #!/usr/bin/perl $regexp = shift; $replacement = shift; while (<>) { s/$regexp/$replacement/g; print; } ^D % simple_replace regexp regex perlretut.pod In C<simple_replace> we used the C<s///g> modifier to replace all occurrences of the regexp on each line. (Even though the regular expression appears in a loop, Perl is smart enough to compile it only once.) As with C<simple_grep>, both the C<print> and the C<s/$regexp/$replacement/g> use C<$_> implicitly. If you don't want C<s///> to change your original variable you can use the non-destructive substitute modifier, C<s///r>. This changes the behavior so that C<s///r> returns the final substituted string (instead of the number of substitutions): $x = "I like dogs."; $y = $x =~ s/dogs/cats/r; print "$x $y\n"; That example will print "I like dogs. I like cats". Notice the original C<$x> variable has not been affected. The overall result of the substitution is instead stored in C<$y>. If the substitution doesn't affect anything then the original string is returned: $x = "I like dogs."; $y = $x =~ s/elephants/cougars/r; print "$x $y\n"; # prints "I like dogs. I like dogs." One other interesting thing that the C<s///r> flag allows is chaining substitutions: $x = "Cats are great."; print $x =~ s/Cats/Dogs/r =~ s/Dogs/Frogs/r =~ s/Frogs/Hedgehogs/r, "\n"; # prints "Hedgehogs are great." A modifier available specifically to search and replace is the C<s///e> evaluation modifier. C<s///e> treats the replacement text as Perl code, rather than a double-quoted string. The value that the code returns is substituted for the matched substring. C<s///e> is useful if you need to do a bit of computation in the process of replacing text. This example counts character frequencies in a line: $x = "Bill the cat"; $x =~ s/(.)/$chars{$1}++;$1/eg; # final $1 replaces char with itself print "frequency of '$_' is $chars{$_}\n" foreach (sort {$chars{$b} <=> $chars{$a}} keys %chars); This prints frequency of ' ' is 2 frequency of 't' is 2 frequency of 'l' is 2 frequency of 'B' is 1 frequency of 'c' is 1 frequency of 'e' is 1 frequency of 'h' is 1 frequency of 'i' is 1 frequency of 'a' is 1 As with the match C<m//> operator, C<s///> can use other delimiters, such as C<s!!!> and C<s{}{}>, and even C<s{}//>. If single quotes are used C<s'''>, then the regexp and replacement are treated as single-quoted strings and there are no variable substitutions. C<s///> in list context returns the same thing as in scalar context, I<i.e.>, the number of matches. =head3 The split function The C<split()> function is another place where a regexp is used. C<split /regexp/, string, limit> separates the C<string> operand into a list of substrings and returns that list. The regexp must be designed to match whatever constitutes the separators for the desired substrings. The C<limit>, if present, constrains splitting into no more than C<limit> number of strings. For example, to split a string into words, use $x = "Calvin and Hobbes"; @words = split /\s+/, $x; # $word[0] = 'Calvin' # $word[1] = 'and' # $word[2] = 'Hobbes' If the empty regexp C<//> is used, the regexp always matches and the string is split into individual characters. If the regexp has groupings, then the resulting list contains the matched substrings from the groupings as well. For instance, $x = "/usr/bin/perl"; @dirs = split m!/!, $x; # $dirs[0] = '' # $dirs[1] = 'usr' # $dirs[2] = 'bin' # $dirs[3] = 'perl' @parts = split m!(/)!, $x; # $parts[0] = '' # $parts[1] = '/' # $parts[2] = 'usr' # $parts[3] = '/' # $parts[4] = 'bin' # $parts[5] = '/' # $parts[6] = 'perl' Since the first character of C<$x> matched the regexp, C<split> prepended an empty initial element to the list. If you have read this far, congratulations! You now have all the basic tools needed to use regular expressions to solve a wide range of text processing problems. If this is your first time through the tutorial, why not stop here and play around with regexps a while.... S<Part 2> concerns the more esoteric aspects of regular expressions and those concepts certainly aren't needed right at the start. =head1 Part 2: Power tools OK, you know the basics of regexps and you want to know more. If matching regular expressions is analogous to a walk in the woods, then the tools discussed in Part 1 are analogous to topo maps and a compass, basic tools we use all the time. Most of the tools in part 2 are analogous to flare guns and satellite phones. They aren't used too often on a hike, but when we are stuck, they can be invaluable. What follows are the more advanced, less used, or sometimes esoteric capabilities of Perl regexps. In Part 2, we will assume you are comfortable with the basics and concentrate on the advanced features. =head2 More on characters, strings, and character classes There are a number of escape sequences and character classes that we haven't covered yet. There are several escape sequences that convert characters or strings between upper and lower case, and they are also available within patterns. C<\l> and C<\u> convert the next character to lower or upper case, respectively: $x = "perl"; $string =~ /\u$x/; # matches 'Perl' in $string $x = "M(rs?|s)\\."; # note the double backslash $string =~ /\l$x/; # matches 'mr.', 'mrs.', and 'ms.', A C<\L> or C<\U> indicates a lasting conversion of case, until terminated by C<\E> or thrown over by another C<\U> or C<\L>: $x = "This word is in lower case:\L SHOUT\E"; $x =~ /shout/; # matches $x = "I STILL KEYPUNCH CARDS FOR MY 360"; $x =~ /\Ukeypunch/; # matches punch card string If there is no C<\E>, case is converted until the end of the string. The regexps C<\L\u$word> or C<\u\L$word> convert the first character of C<$word> to uppercase and the rest of the characters to lowercase. Control characters can be escaped with C<\c>, so that a control-Z character would be matched with C<\cZ>. The escape sequence C<\Q>...C<\E> quotes, or protects most non-alphabetic characters. For instance, $x = "\QThat !^*&%~& cat!"; $x =~ /\Q!^*&%~&\E/; # check for rough language It does not protect C<'$'> or C<'@'>, so that variables can still be substituted. C<\Q>, C<\L>, C<\l>, C<\U>, C<\u> and C<\E> are actually part of double-quotish syntax, and not part of regexp syntax proper. They will work if they appear in a regular expression embedded directly in a program, but not when contained in a string that is interpolated in a pattern. Perl regexps can handle more than just the standard ASCII character set. Perl supports I<Unicode>, a standard for representing the alphabets from virtually all of the world's written languages, and a host of symbols. Perl's text strings are Unicode strings, so they can contain characters with a value (codepoint or character number) higher than 255. What does this mean for regexps? Well, regexp users don't need to know much about Perl's internal representation of strings. But they do need to know 1) how to represent Unicode characters in a regexp and 2) that a matching operation will treat the string to be searched as a sequence of characters, not bytes. The answer to 1) is that Unicode characters greater than C<chr(255)> are represented using the C<\x{hex}> notation, because C<\x>I<XY> (without curly braces and I<XY> are two hex digits) doesn't go further than 255. (Starting in Perl 5.14, if you're an octal fan, you can also use C<\o{oct}>.) /\x{263a}/; # match a Unicode smiley face :) B<NOTE>: In Perl 5.6.0 it used to be that one needed to say C<use utf8> to use any Unicode features. This is no more the case: for almost all Unicode processing, the explicit C<utf8> pragma is not needed. (The only case where it matters is if your Perl script is in Unicode and encoded in UTF-8, then an explicit C<use utf8> is needed.) Figuring out the hexadecimal sequence of a Unicode character you want or deciphering someone else's hexadecimal Unicode regexp is about as much fun as programming in machine code. So another way to specify Unicode characters is to use the I<named character> escape sequence C<\N{I<name>}>. I<name> is a name for the Unicode character, as specified in the Unicode standard. For instance, if we wanted to represent or match the astrological sign for the planet Mercury, we could use $x = "abc\N{MERCURY}def"; $x =~ /\N{MERCURY}/; # matches One can also use "short" names: print "\N{GREEK SMALL LETTER SIGMA} is called sigma.\n"; print "\N{greek:Sigma} is an upper-case sigma.\n"; You can also restrict names to a certain alphabet by specifying the L<charnames> pragma: use charnames qw(greek); print "\N{sigma} is Greek sigma\n"; An index of character names is available on-line from the Unicode Consortium, L<https://www.unicode.org/charts/charindex.html>; explanatory material with links to other resources at L<https://www.unicode.org/standard/where>. Starting in Perl v5.32, an alternative to C<\N{...}> for full names is available, and that is to say /\p{Name=greek small letter sigma}/ The casing of the character name is irrelevant when used in C<\p{}>, as are most spaces, underscores and hyphens. (A few outlier characters cause problems with ignoring all of them always. The details (which you can look up when you get more proficient, and if ever needed) are in L<https://www.unicode.org/reports/tr44/tr44-24.html#UAX44-LM2>). The answer to requirement 2) is that a regexp (mostly) uses Unicode characters. The "mostly" is for messy backward compatibility reasons, but starting in Perl 5.14, any regexp compiled in the scope of a C<use feature 'unicode_strings'> (which is automatically turned on within the scope of a C<use 5.012> or higher) will turn that "mostly" into "always". If you want to handle Unicode properly, you should ensure that C<'unicode_strings'> is turned on. Internally, this is encoded to bytes using either UTF-8 or a native 8 bit encoding, depending on the history of the string, but conceptually it is a sequence of characters, not bytes. See L<perlunitut> for a tutorial about that. Let us now discuss Unicode character classes, most usually called "character properties". These are represented by the C<\p{I<name>}> escape sequence. The negation of this is C<\P{I<name>}>. For example, to match lower and uppercase characters, $x = "BOB"; $x =~ /^\p{IsUpper}/; # matches, uppercase char class $x =~ /^\P{IsUpper}/; # doesn't match, char class sans uppercase $x =~ /^\p{IsLower}/; # doesn't match, lowercase char class $x =~ /^\P{IsLower}/; # matches, char class sans lowercase (The "C<Is>" is optional.) There are many, many Unicode character properties. For the full list see L<perluniprops>. Most of them have synonyms with shorter names, also listed there. Some synonyms are a single character. For these, you can drop the braces. For instance, C<\pM> is the same thing as C<\p{Mark}>, meaning things like accent marks. The Unicode C<\p{Script}> and C<\p{Script_Extensions}> properties are used to categorize every Unicode character into the language script it is written in. (C<Script_Extensions> is an improved version of C<Script>, which is retained for backward compatibility, and so you should generally use C<Script_Extensions>.) For example, English, French, and a bunch of other European languages are written in the Latin script. But there is also the Greek script, the Thai script, the Katakana script, I<etc>. You can test whether a character is in a particular script (based on C<Script_Extensions>) with, for example C<\p{Latin}>, C<\p{Greek}>, or C<\p{Katakana}>. To test if it isn't in the Balinese script, you would use C<\P{Balinese}>. What we have described so far is the single form of the C<\p{...}> character classes. There is also a compound form which you may run into. These look like C<\p{I<name>=I<value>}> or C<\p{I<name>:I<value>}> (the equals sign and colon can be used interchangeably). These are more general than the single form, and in fact most of the single forms are just Perl-defined shortcuts for common compound forms. For example, the script examples in the previous paragraph could be written equivalently as C<\p{Script_Extensions=Latin}>, C<\p{Script_Extensions:Greek}>, C<\p{script_extensions=katakana}>, and C<\P{script_extensions=balinese}> (case is irrelevant between the C<{}> braces). You may never have to use the compound forms, but sometimes it is necessary, and their use can make your code easier to understand. C<\X> is an abbreviation for a character class that comprises a Unicode I<extended grapheme cluster>. This represents a "logical character": what appears to be a single character, but may be represented internally by more than one. As an example, using the Unicode full names, I<e.g.>, "S<A + COMBINING RING>" is a grapheme cluster with base character "A" and combining character "S<COMBINING RING>, which translates in Danish to "A" with the circle atop it, as in the word E<Aring>ngstrom. For the full and latest information about Unicode see the latest Unicode standard, or the Unicode Consortium's website L<https://www.unicode.org> As if all those classes weren't enough, Perl also defines POSIX-style character classes. These have the form C<[:I<name>:]>, with I<name> the name of the POSIX class. The POSIX classes are C<alpha>, C<alnum>, C<ascii>, C<cntrl>, C<digit>, C<graph>, C<lower>, C<print>, C<punct>, C<space>, C<upper>, and C<xdigit>, and two extensions, C<word> (a Perl extension to match C<\w>), and C<blank> (a GNU extension). The C</a> modifier restricts these to matching just in the ASCII range; otherwise they can match the same as their corresponding Perl Unicode classes: C<[:upper:]> is the same as C<\p{IsUpper}>, I<etc>. (There are some exceptions and gotchas with this; see L<perlrecharclass> for a full discussion.) The C<[:digit:]>, C<[:word:]>, and C<[:space:]> correspond to the familiar C<\d>, C<\w>, and C<\s> character classes. To negate a POSIX class, put a C<'^'> in front of the name, so that, I<e.g.>, C<[:^digit:]> corresponds to C<\D> and, under Unicode, C<\P{IsDigit}>. The Unicode and POSIX character classes can be used just like C<\d>, with the exception that POSIX character classes can only be used inside of a character class: /\s+[abc[:digit:]xyz]\s*/; # match a,b,c,x,y,z, or a digit /^=item\s[[:digit:]]/; # match '=item', # followed by a space and a digit /\s+[abc\p{IsDigit}xyz]\s+/; # match a,b,c,x,y,z, or a digit /^=item\s\p{IsDigit}/; # match '=item', # followed by a space and a digit Whew! That is all the rest of the characters and character classes. =head2 Compiling and saving regular expressions In Part 1 we mentioned that Perl compiles a regexp into a compact sequence of opcodes. Thus, a compiled regexp is a data structure that can be stored once and used again and again. The regexp quote C<qr//> does exactly that: C<qr/string/> compiles the C<string> as a regexp and transforms the result into a form that can be assigned to a variable: $reg = qr/foo+bar?/; # reg contains a compiled regexp Then C<$reg> can be used as a regexp: $x = "fooooba"; $x =~ $reg; # matches, just like /foo+bar?/ $x =~ /$reg/; # same thing, alternate form C<$reg> can also be interpolated into a larger regexp: $x =~ /(abc)?$reg/; # still matches As with the matching operator, the regexp quote can use different delimiters, I<e.g.>, C<qr!!>, C<qr{}> or C<qr~~>. Apostrophes as delimiters (C<qr''>) inhibit any interpolation. Pre-compiled regexps are useful for creating dynamic matches that don't need to be recompiled each time they are encountered. Using pre-compiled regexps, we write a C<grep_step> program which greps for a sequence of patterns, advancing to the next pattern as soon as one has been satisfied. % cat > grep_step #!/usr/bin/perl # grep_step - match <number> regexps, one after the other # usage: multi_grep <number> regexp1 regexp2 ... file1 file2 ... $number = shift; $regexp[$_] = shift foreach (0..$number-1); @compiled = map qr/$_/, @regexp; while ($line = <>) { if ($line =~ /$compiled[0]/) { print $line; shift @compiled; last unless @compiled; } } ^D % grep_step 3 shift print last grep_step $number = shift; print $line; last unless @compiled; Storing pre-compiled regexps in an array C<@compiled> allows us to simply loop through the regexps without any recompilation, thus gaining flexibility without sacrificing speed. =head2 Composing regular expressions at runtime Backtracking is more efficient than repeated tries with different regular expressions. If there are several regular expressions and a match with any of them is acceptable, then it is possible to combine them into a set of alternatives. If the individual expressions are input data, this can be done by programming a join operation. We'll exploit this idea in an improved version of the C<simple_grep> program: a program that matches multiple patterns: % cat > multi_grep #!/usr/bin/perl # multi_grep - match any of <number> regexps # usage: multi_grep <number> regexp1 regexp2 ... file1 file2 ... $number = shift; $regexp[$_] = shift foreach (0..$number-1); $pattern = join '|', @regexp; while ($line = <>) { print $line if $line =~ /$pattern/; } ^D % multi_grep 2 shift for multi_grep $number = shift; $regexp[$_] = shift foreach (0..$number-1); Sometimes it is advantageous to construct a pattern from the I<input> that is to be analyzed and use the permissible values on the left hand side of the matching operations. As an example for this somewhat paradoxical situation, let's assume that our input contains a command verb which should match one out of a set of available command verbs, with the additional twist that commands may be abbreviated as long as the given string is unique. The program below demonstrates the basic algorithm. % cat > keymatch #!/usr/bin/perl $kwds = 'copy compare list print'; while( $cmd = <> ){ $cmd =~ s/^\s+|\s+$//g; # trim leading and trailing spaces if( ( @matches = $kwds =~ /\b$cmd\w*/g ) == 1 ){ print "command: '@matches'\n"; } elsif( @matches == 0 ){ print "no such command: '$cmd'\n"; } else { print "not unique: '$cmd' (could be one of: @matches)\n"; } } ^D % keymatch li command: 'list' co not unique: 'co' (could be one of: copy compare) printer no such command: 'printer' Rather than trying to match the input against the keywords, we match the combined set of keywords against the input. The pattern matching operation S<C<$kwds =~ /\b($cmd\w*)/g>> does several things at the same time. It makes sure that the given command begins where a keyword begins (C<\b>). It tolerates abbreviations due to the added C<\w*>. It tells us the number of matches (C<scalar @matches>) and all the keywords that were actually matched. You could hardly ask for more. =head2 Embedding comments and modifiers in a regular expression Starting with this section, we will be discussing Perl's set of I<extended patterns>. These are extensions to the traditional regular expression syntax that provide powerful new tools for pattern matching. We have already seen extensions in the form of the minimal matching constructs C<??>, C<*?>, C<+?>, C<{n,m}?>, and C<{n,}?>. Most of the extensions below have the form C<(?char...)>, where the C<char> is a character that determines the type of extension. The first extension is an embedded comment C<(?#text)>. This embeds a comment into the regular expression without affecting its meaning. The comment should not have any closing parentheses in the text. An example is /(?# Match an integer:)[+-]?\d+/; This style of commenting has been largely superseded by the raw, freeform commenting that is allowed with the C</x> modifier. Most modifiers, such as C</i>, C</m>, C</s> and C</x> (or any combination thereof) can also be embedded in a regexp using C<(?i)>, C<(?m)>, C<(?s)>, and C<(?x)>. For instance, /(?i)yes/; # match 'yes' case insensitively /yes/i; # same thing /(?x)( # freeform version of an integer regexp [+-]? # match an optional sign \d+ # match a sequence of digits ) /x; Embedded modifiers can have two important advantages over the usual modifiers. Embedded modifiers allow a custom set of modifiers for I<each> regexp pattern. This is great for matching an array of regexps that must have different modifiers: $pattern[0] = '(?i)doctor'; $pattern[1] = 'Johnson'; ... while (<>) { foreach $patt (@pattern) { print if /$patt/; } } The second advantage is that embedded modifiers (except C</p>, which modifies the entire regexp) only affect the regexp inside the group the embedded modifier is contained in. So grouping can be used to localize the modifier's effects: /Answer: ((?i)yes)/; # matches 'Answer: yes', 'Answer: YES', etc. Embedded modifiers can also turn off any modifiers already present by using, I<e.g.>, C<(?-i)>. Modifiers can also be combined into a single expression, I<e.g.>, C<(?s-i)> turns on single line mode and turns off case insensitivity. Embedded modifiers may also be added to a non-capturing grouping. C<(?i-m:regexp)> is a non-capturing grouping that matches C<regexp> case insensitively and turns off multi-line mode. =head2 Looking ahead and looking behind This section concerns the lookahead and lookbehind assertions. First, a little background. In Perl regular expressions, most regexp elements "eat up" a certain amount of string when they match. For instance, the regexp element C<[abc]> eats up one character of the string when it matches, in the sense that Perl moves to the next character position in the string after the match. There are some elements, however, that don't eat up characters (advance the character position) if they match. The examples we have seen so far are the anchors. The anchor C<'^'> matches the beginning of the line, but doesn't eat any characters. Similarly, the word boundary anchor C<\b> matches wherever a character matching C<\w> is next to a character that doesn't, but it doesn't eat up any characters itself. Anchors are examples of I<zero-width assertions>: zero-width, because they consume no characters, and assertions, because they test some property of the string. In the context of our walk in the woods analogy to regexp matching, most regexp elements move us along a trail, but anchors have us stop a moment and check our surroundings. If the local environment checks out, we can proceed forward. But if the local environment doesn't satisfy us, we must backtrack. Checking the environment entails either looking ahead on the trail, looking behind, or both. C<'^'> looks behind, to see that there are no characters before. C<'$'> looks ahead, to see that there are no characters after. C<\b> looks both ahead and behind, to see if the characters on either side differ in their "word-ness". The lookahead and lookbehind assertions are generalizations of the anchor concept. Lookahead and lookbehind are zero-width assertions that let us specify which characters we want to test for. The lookahead assertion is denoted by C<(?=regexp)> or (starting in 5.32, experimentally in 5.28) C<(*pla:regexp)> or C<(*positive_lookahead:regexp)>; and the lookbehind assertion is denoted by C<< (?<=fixed-regexp) >> or (starting in 5.32, experimentally in 5.28) C<(*plb:fixed-regexp)> or C<(*positive_lookbehind:fixed-regexp)>. Some examples are $x = "I catch the housecat 'Tom-cat' with catnip"; $x =~ /cat(*pla:\s)/; # matches 'cat' in 'housecat' @catwords = ($x =~ /(?<=\s)cat\w+/g); # matches, # $catwords[0] = 'catch' # $catwords[1] = 'catnip' $x =~ /\bcat\b/; # matches 'cat' in 'Tom-cat' $x =~ /(?<=\s)cat(?=\s)/; # doesn't match; no isolated 'cat' in # middle of $x Note that the parentheses in these are non-capturing, since these are zero-width assertions. Thus in the second regexp, the substrings captured are those of the whole regexp itself. Lookahead can match arbitrary regexps, but lookbehind prior to 5.30 C<< (?<=fixed-regexp) >> only works for regexps of fixed width, I<i.e.>, a fixed number of characters long. Thus C<< (?<=(ab|bc)) >> is fine, but C<< (?<=(ab)*) >> prior to 5.30 is not. The negated versions of the lookahead and lookbehind assertions are denoted by C<(?!regexp)> and C<< (?<!fixed-regexp) >> respectively. Or, starting in 5.32 (experimentally in 5.28), C<(*nla:regexp)>, C<(*negative_lookahead:regexp)>, C<(*nlb:regexp)>, or C<(*negative_lookbehind:regexp)>. They evaluate true if the regexps do I<not> match: $x = "foobar"; $x =~ /foo(?!bar)/; # doesn't match, 'bar' follows 'foo' $x =~ /foo(?!baz)/; # matches, 'baz' doesn't follow 'foo' $x =~ /(?<!\s)foo/; # matches, there is no \s before 'foo' Here is an example where a string containing blank-separated words, numbers and single dashes is to be split into its components. Using C</\s+/> alone won't work, because spaces are not required between dashes, or a word or a dash. Additional places for a split are established by looking ahead and behind: $str = "one two - --6-8"; @toks = split / \s+ # a run of spaces | (?<=\S) (?=-) # any non-space followed by '-' | (?<=-) (?=\S) # a '-' followed by any non-space /x, $str; # @toks = qw(one two - - - 6 - 8) =head2 Using independent subexpressions to prevent backtracking I<Independent subexpressions> (or atomic subexpressions) are regular expressions, in the context of a larger regular expression, that function independently of the larger regular expression. That is, they consume as much or as little of the string as they wish without regard for the ability of the larger regexp to match. Independent subexpressions are represented by C<< (?>regexp) >> or (starting in 5.32, experimentally in 5.28) C<(*atomic:regexp)>. We can illustrate their behavior by first considering an ordinary regexp: $x = "ab"; $x =~ /a*ab/; # matches This obviously matches, but in the process of matching, the subexpression C<a*> first grabbed the C<'a'>. Doing so, however, wouldn't allow the whole regexp to match, so after backtracking, C<a*> eventually gave back the C<'a'> and matched the empty string. Here, what C<a*> matched was I<dependent> on what the rest of the regexp matched. Contrast that with an independent subexpression: $x =~ /(?>a*)ab/; # doesn't match! The independent subexpression C<< (?>a*) >> doesn't care about the rest of the regexp, so it sees an C<'a'> and grabs it. Then the rest of the regexp C<ab> cannot match. Because C<< (?>a*) >> is independent, there is no backtracking and the independent subexpression does not give up its C<'a'>. Thus the match of the regexp as a whole fails. A similar behavior occurs with completely independent regexps: $x = "ab"; $x =~ /a*/g; # matches, eats an 'a' $x =~ /\Gab/g; # doesn't match, no 'a' available Here C</g> and C<\G> create a "tag team" handoff of the string from one regexp to the other. Regexps with an independent subexpression are much like this, with a handoff of the string to the independent subexpression, and a handoff of the string back to the enclosing regexp. The ability of an independent subexpression to prevent backtracking can be quite useful. Suppose we want to match a non-empty string enclosed in parentheses up to two levels deep. Then the following regexp matches: $x = "abc(de(fg)h"; # unbalanced parentheses $x =~ /\( ( [ ^ () ]+ | \( [ ^ () ]* \) )+ \)/xx; The regexp matches an open parenthesis, one or more copies of an alternation, and a close parenthesis. The alternation is two-way, with the first alternative C<[^()]+> matching a substring with no parentheses and the second alternative C<\([^()]*\)> matching a substring delimited by parentheses. The problem with this regexp is that it is pathological: it has nested indeterminate quantifiers of the form C<(a+|b)+>. We discussed in Part 1 how nested quantifiers like this could take an exponentially long time to execute if there was no match possible. To prevent the exponential blowup, we need to prevent useless backtracking at some point. This can be done by enclosing the inner quantifier as an independent subexpression: $x =~ /\( ( (?> [ ^ () ]+ ) | \([ ^ () ]* \) )+ \)/xx; Here, C<< (?>[^()]+) >> breaks the degeneracy of string partitioning by gobbling up as much of the string as possible and keeping it. Then match failures fail much more quickly. =head2 Conditional expressions A I<conditional expression> is a form of if-then-else statement that allows one to choose which patterns are to be matched, based on some condition. There are two types of conditional expression: C<(?(I<condition>)I<yes-regexp>)> and C<(?(condition)I<yes-regexp>|I<no-regexp>)>. C<(?(I<condition>)I<yes-regexp>)> is like an S<C<'if () {}'>> statement in Perl. If the I<condition> is true, the I<yes-regexp> will be matched. If the I<condition> is false, the I<yes-regexp> will be skipped and Perl will move onto the next regexp element. The second form is like an S<C<'if () {} else {}'>> statement in Perl. If the I<condition> is true, the I<yes-regexp> will be matched, otherwise the I<no-regexp> will be matched. The I<condition> can have several forms. The first form is simply an integer in parentheses C<(I<integer>)>. It is true if the corresponding backreference C<\I<integer>> matched earlier in the regexp. The same thing can be done with a name associated with a capture group, written as C<<< (E<lt>I<name>E<gt>) >>> or C<< ('I<name>') >>. The second form is a bare zero-width assertion C<(?...)>, either a lookahead, a lookbehind, or a code assertion (discussed in the next section). The third set of forms provides tests that return true if the expression is executed within a recursion (C<(R)>) or is being called from some capturing group, referenced either by number (C<(R1)>, C<(R2)>,...) or by name (C<(R&I<name>)>). The integer or name form of the C<condition> allows us to choose, with more flexibility, what to match based on what matched earlier in the regexp. This searches for words of the form C<"$x$x"> or C<"$x$y$y$x">: % simple_grep '^(\w+)(\w+)?(?(2)\g2\g1|\g1)$' /usr/dict/words beriberi coco couscous deed ... toot toto tutu The lookbehind C<condition> allows, along with backreferences, an earlier part of the match to influence a later part of the match. For instance, /[ATGC]+(?(?<=AA)G|C)$/; matches a DNA sequence such that it either ends in C<AAG>, or some other base pair combination and C<'C'>. Note that the form is C<< (?(?<=AA)G|C) >> and not C<< (?((?<=AA))G|C) >>; for the lookahead, lookbehind or code assertions, the parentheses around the conditional are not needed. =head2 Defining named patterns Some regular expressions use identical subpatterns in several places. Starting with Perl 5.10, it is possible to define named subpatterns in a section of the pattern so that they can be called up by name anywhere in the pattern. This syntactic pattern for this definition group is C<< (?(DEFINE)(?<I<name>>I<pattern>)...) >>. An insertion of a named pattern is written as C<(?&I<name>)>. The example below illustrates this feature using the pattern for floating point numbers that was presented earlier on. The three subpatterns that are used more than once are the optional sign, the digit sequence for an integer and the decimal fraction. The C<DEFINE> group at the end of the pattern contains their definition. Notice that the decimal fraction pattern is the first place where we can reuse the integer pattern. /^ (?&osg)\ * ( (?&int)(?&dec)? | (?&dec) ) (?: [eE](?&osg)(?&int) )? $ (?(DEFINE) (?<osg>[-+]?) # optional sign (?<int>\d++) # integer (?<dec>\.(?&int)) # decimal fraction )/x =head2 Recursive patterns This feature (introduced in Perl 5.10) significantly extends the power of Perl's pattern matching. By referring to some other capture group anywhere in the pattern with the construct C<(?I<group-ref>)>, the I<pattern> within the referenced group is used as an independent subpattern in place of the group reference itself. Because the group reference may be contained I<within> the group it refers to, it is now possible to apply pattern matching to tasks that hitherto required a recursive parser. To illustrate this feature, we'll design a pattern that matches if a string contains a palindrome. (This is a word or a sentence that, while ignoring spaces, interpunctuation and case, reads the same backwards as forwards. We begin by observing that the empty string or a string containing just one word character is a palindrome. Otherwise it must have a word character up front and the same at its end, with another palindrome in between. /(?: (\w) (?...Here be a palindrome...) \g{-1} | \w? )/x Adding C<\W*> at either end to eliminate what is to be ignored, we already have the full pattern: my $pp = qr/^(\W* (?: (\w) (?1) \g{-1} | \w? ) \W*)$/ix; for $s ( "saippuakauppias", "A man, a plan, a canal: Panama!" ){ print "'$s' is a palindrome\n" if $s =~ /$pp/; } In C<(?...)> both absolute and relative backreferences may be used. The entire pattern can be reinserted with C<(?R)> or C<(?0)>. If you prefer to name your groups, you can use C<(?&I<name>)> to recurse into that group. =head2 A bit of magic: executing Perl code in a regular expression Normally, regexps are a part of Perl expressions. I<Code evaluation> expressions turn that around by allowing arbitrary Perl code to be a part of a regexp. A code evaluation expression is denoted C<(?{I<code>})>, with I<code> a string of Perl statements. Code expressions are zero-width assertions, and the value they return depends on their environment. There are two possibilities: either the code expression is used as a conditional in a conditional expression C<(?(I<condition>)...)>, or it is not. If the code expression is a conditional, the code is evaluated and the result (I<i.e.>, the result of the last statement) is used to determine truth or falsehood. If the code expression is not used as a conditional, the assertion always evaluates true and the result is put into the special variable C<$^R>. The variable C<$^R> can then be used in code expressions later in the regexp. Here are some silly examples: $x = "abcdef"; $x =~ /abc(?{print "Hi Mom!";})def/; # matches, # prints 'Hi Mom!' $x =~ /aaa(?{print "Hi Mom!";})def/; # doesn't match, # no 'Hi Mom!' Pay careful attention to the next example: $x =~ /abc(?{print "Hi Mom!";})ddd/; # doesn't match, # no 'Hi Mom!' # but why not? At first glance, you'd think that it shouldn't print, because obviously the C<ddd> isn't going to match the target string. But look at this example: $x =~ /abc(?{print "Hi Mom!";})[dD]dd/; # doesn't match, # but _does_ print Hmm. What happened here? If you've been following along, you know that the above pattern should be effectively (almost) the same as the last one; enclosing the C<'d'> in a character class isn't going to change what it matches. So why does the first not print while the second one does? The answer lies in the optimizations the regexp engine makes. In the first case, all the engine sees are plain old characters (aside from the C<?{}> construct). It's smart enough to realize that the string C<'ddd'> doesn't occur in our target string before actually running the pattern through. But in the second case, we've tricked it into thinking that our pattern is more complicated. It takes a look, sees our character class, and decides that it will have to actually run the pattern to determine whether or not it matches, and in the process of running it hits the print statement before it discovers that we don't have a match. To take a closer look at how the engine does optimizations, see the section L</"Pragmas and debugging"> below. More fun with C<?{}>: $x =~ /(?{print "Hi Mom!";})/; # matches, # prints 'Hi Mom!' $x =~ /(?{$c = 1;})(?{print "$c";})/; # matches, # prints '1' $x =~ /(?{$c = 1;})(?{print "$^R";})/; # matches, # prints '1' The bit of magic mentioned in the section title occurs when the regexp backtracks in the process of searching for a match. If the regexp backtracks over a code expression and if the variables used within are localized using C<local>, the changes in the variables produced by the code expression are undone! Thus, if we wanted to count how many times a character got matched inside a group, we could use, I<e.g.>, $x = "aaaa"; $count = 0; # initialize 'a' count $c = "bob"; # test if $c gets clobbered $x =~ /(?{local $c = 0;}) # initialize count ( a # match 'a' (?{local $c = $c + 1;}) # increment count )* # do this any number of times, aa # but match 'aa' at the end (?{$count = $c;}) # copy local $c var into $count /x; print "'a' count is $count, \$c variable is '$c'\n"; This prints 'a' count is 2, $c variable is 'bob' If we replace the S<C< (?{local $c = $c + 1;})>> with S<C< (?{$c = $c + 1;})>>, the variable changes are I<not> undone during backtracking, and we get 'a' count is 4, $c variable is 'bob' Note that only localized variable changes are undone. Other side effects of code expression execution are permanent. Thus $x = "aaaa"; $x =~ /(a(?{print "Yow\n";}))*aa/; produces Yow Yow Yow Yow The result C<$^R> is automatically localized, so that it will behave properly in the presence of backtracking. This example uses a code expression in a conditional to match a definite article, either C<'the'> in English or C<'der|die|das'> in German: $lang = 'DE'; # use German ... $text = "das"; print "matched\n" if $text =~ /(?(?{ $lang eq 'EN'; # is the language English? }) the | # if so, then match 'the' (der|die|das) # else, match 'der|die|das' ) /xi; Note that the syntax here is C<(?(?{...})I<yes-regexp>|I<no-regexp>)>, not C<(?((?{...}))I<yes-regexp>|I<no-regexp>)>. In other words, in the case of a code expression, we don't need the extra parentheses around the conditional. If you try to use code expressions where the code text is contained within an interpolated variable, rather than appearing literally in the pattern, Perl may surprise you: $bar = 5; $pat = '(?{ 1 })'; /foo(?{ $bar })bar/; # compiles ok, $bar not interpolated /foo(?{ 1 })$bar/; # compiles ok, $bar interpolated /foo${pat}bar/; # compile error! $pat = qr/(?{ $foo = 1 })/; # precompile code regexp /foo${pat}bar/; # compiles ok If a regexp has a variable that interpolates a code expression, Perl treats the regexp as an error. If the code expression is precompiled into a variable, however, interpolating is ok. The question is, why is this an error? The reason is that variable interpolation and code expressions together pose a security risk. The combination is dangerous because many programmers who write search engines often take user input and plug it directly into a regexp: $regexp = <>; # read user-supplied regexp $chomp $regexp; # get rid of possible newline $text =~ /$regexp/; # search $text for the $regexp If the C<$regexp> variable contains a code expression, the user could then execute arbitrary Perl code. For instance, some joker could search for S<C<system('rm -rf *');>> to erase your files. In this sense, the combination of interpolation and code expressions I<taints> your regexp. So by default, using both interpolation and code expressions in the same regexp is not allowed. If you're not concerned about malicious users, it is possible to bypass this security check by invoking S<C<use re 'eval'>>: use re 'eval'; # throw caution out the door $bar = 5; $pat = '(?{ 1 })'; /foo${pat}bar/; # compiles ok Another form of code expression is the I<pattern code expression>. The pattern code expression is like a regular code expression, except that the result of the code evaluation is treated as a regular expression and matched immediately. A simple example is $length = 5; $char = 'a'; $x = 'aaaaabb'; $x =~ /(??{$char x $length})/x; # matches, there are 5 of 'a' This final example contains both ordinary and pattern code expressions. It detects whether a binary string C<1101010010001...> has a Fibonacci spacing 0,1,1,2,3,5,... of the C<'1'>'s: $x = "1101010010001000001"; $z0 = ''; $z1 = '0'; # initial conditions print "It is a Fibonacci sequence\n" if $x =~ /^1 # match an initial '1' (?: ((??{ $z0 })) # match some '0' 1 # and then a '1' (?{ $z0 = $z1; $z1 .= $^N; }) )+ # repeat as needed $ # that is all there is /x; printf "Largest sequence matched was %d\n", length($z1)-length($z0); Remember that C<$^N> is set to whatever was matched by the last completed capture group. This prints It is a Fibonacci sequence Largest sequence matched was 5 Ha! Try that with your garden variety regexp package... Note that the variables C<$z0> and C<$z1> are not substituted when the regexp is compiled, as happens for ordinary variables outside a code expression. Rather, the whole code block is parsed as perl code at the same time as perl is compiling the code containing the literal regexp pattern. This regexp without the C</x> modifier is /^1(?:((??{ $z0 }))1(?{ $z0 = $z1; $z1 .= $^N; }))+$/ which shows that spaces are still possible in the code parts. Nevertheless, when working with code and conditional expressions, the extended form of regexps is almost necessary in creating and debugging regexps. =head2 Backtracking control verbs Perl 5.10 introduced a number of control verbs intended to provide detailed control over the backtracking process, by directly influencing the regexp engine and by providing monitoring techniques. See L<perlre/"Special Backtracking Control Verbs"> for a detailed description. Below is just one example, illustrating the control verb C<(*FAIL)>, which may be abbreviated as C<(*F)>. If this is inserted in a regexp it will cause it to fail, just as it would at some mismatch between the pattern and the string. Processing of the regexp continues as it would after any "normal" failure, so that, for instance, the next position in the string or another alternative will be tried. As failing to match doesn't preserve capture groups or produce results, it may be necessary to use this in combination with embedded code. %count = (); "supercalifragilisticexpialidocious" =~ /([aeiou])(?{ $count{$1}++; })(*FAIL)/i; printf "%3d '%s'\n", $count{$_}, $_ for (sort keys %count); The pattern begins with a class matching a subset of letters. Whenever this matches, a statement like C<$count{'a'}++;> is executed, incrementing the letter's counter. Then C<(*FAIL)> does what it says, and the regexp engine proceeds according to the book: as long as the end of the string hasn't been reached, the position is advanced before looking for another vowel. Thus, match or no match makes no difference, and the regexp engine proceeds until the entire string has been inspected. (It's remarkable that an alternative solution using something like $count{lc($_)}++ for split('', "supercalifragilisticexpialidocious"); printf "%3d '%s'\n", $count2{$_}, $_ for ( qw{ a e i o u } ); is considerably slower.) =head2 Pragmas and debugging Speaking of debugging, there are several pragmas available to control and debug regexps in Perl. We have already encountered one pragma in the previous section, S<C<use re 'eval';>>, that allows variable interpolation and code expressions to coexist in a regexp. The other pragmas are use re 'taint'; $tainted = <>; @parts = ($tainted =~ /(\w+)\s+(\w+)/; # @parts is now tainted The C<taint> pragma causes any substrings from a match with a tainted variable to be tainted as well. This is not normally the case, as regexps are often used to extract the safe bits from a tainted variable. Use C<taint> when you are not extracting safe bits, but are performing some other processing. Both C<taint> and C<eval> pragmas are lexically scoped, which means they are in effect only until the end of the block enclosing the pragmas. use re '/m'; # or any other flags $multiline_string =~ /^foo/; # /m is implied The C<re '/flags'> pragma (introduced in Perl 5.14) turns on the given regular expression flags until the end of the lexical scope. See L<re/"'E<sol>flags' mode"> for more detail. use re 'debug'; /^(.*)$/s; # output debugging info use re 'debugcolor'; /^(.*)$/s; # output debugging info in living color The global C<debug> and C<debugcolor> pragmas allow one to get detailed debugging info about regexp compilation and execution. C<debugcolor> is the same as debug, except the debugging information is displayed in color on terminals that can display termcap color sequences. Here is example output: % perl -e 'use re "debug"; "abc" =~ /a*b+c/;' Compiling REx 'a*b+c' size 9 first at 1 1: STAR(4) 2: EXACT <a>(0) 4: PLUS(7) 5: EXACT <b>(0) 7: EXACT <c>(9) 9: END(0) floating 'bc' at 0..2147483647 (checking floating) minlen 2 Guessing start of match, REx 'a*b+c' against 'abc'... Found floating substr 'bc' at offset 1... Guessed: match at offset 0 Matching REx 'a*b+c' against 'abc' Setting an EVAL scope, savestack=3 0 <> <abc> | 1: STAR EXACT <a> can match 1 times out of 32767... Setting an EVAL scope, savestack=3 1 <a> <bc> | 4: PLUS EXACT <b> can match 1 times out of 32767... Setting an EVAL scope, savestack=3 2 <ab> <c> | 7: EXACT <c> 3 <abc> <> | 9: END Match successful! Freeing REx: 'a*b+c' If you have gotten this far into the tutorial, you can probably guess what the different parts of the debugging output tell you. The first part Compiling REx 'a*b+c' size 9 first at 1 1: STAR(4) 2: EXACT <a>(0) 4: PLUS(7) 5: EXACT <b>(0) 7: EXACT <c>(9) 9: END(0) describes the compilation stage. C<STAR(4)> means that there is a starred object, in this case C<'a'>, and if it matches, goto line 4, I<i.e.>, C<PLUS(7)>. The middle lines describe some heuristics and optimizations performed before a match: floating 'bc' at 0..2147483647 (checking floating) minlen 2 Guessing start of match, REx 'a*b+c' against 'abc'... Found floating substr 'bc' at offset 1... Guessed: match at offset 0 Then the match is executed and the remaining lines describe the process: Matching REx 'a*b+c' against 'abc' Setting an EVAL scope, savestack=3 0 <> <abc> | 1: STAR EXACT <a> can match 1 times out of 32767... Setting an EVAL scope, savestack=3 1 <a> <bc> | 4: PLUS EXACT <b> can match 1 times out of 32767... Setting an EVAL scope, savestack=3 2 <ab> <c> | 7: EXACT <c> 3 <abc> <> | 9: END Match successful! Freeing REx: 'a*b+c' Each step is of the form S<C<< n <x> <y> >>>, with C<< <x> >> the part of the string matched and C<< <y> >> the part not yet matched. The S<C<< | 1: STAR >>> says that Perl is at line number 1 in the compilation list above. See L<perldebguts/"Debugging Regular Expressions"> for much more detail. An alternative method of debugging regexps is to embed C<print> statements within the regexp. This provides a blow-by-blow account of the backtracking in an alternation: "that this" =~ m@(?{print "Start at position ", pos, "\n";}) t(?{print "t1\n";}) h(?{print "h1\n";}) i(?{print "i1\n";}) s(?{print "s1\n";}) | t(?{print "t2\n";}) h(?{print "h2\n";}) a(?{print "a2\n";}) t(?{print "t2\n";}) (?{print "Done at position ", pos, "\n";}) @x; prints Start at position 0 t1 h1 t2 h2 a2 t2 Done at position 4 =head1 SEE ALSO This is just a tutorial. For the full story on Perl regular expressions, see the L<perlre> regular expressions reference page. For more information on the matching C<m//> and substitution C<s///> operators, see L<perlop/"Regexp Quote-Like Operators">. For information on the C<split> operation, see L<perlfunc/split>. For an excellent all-around resource on the care and feeding of regular expressions, see the book I<Mastering Regular Expressions> by Jeffrey Friedl (published by O'Reilly, ISBN 1556592-257-3). =head1 AUTHOR AND COPYRIGHT Copyright (c) 2000 Mark Kvale. All rights reserved. Now maintained by Perl porters. This document may be distributed under the same terms as Perl itself. =head2 Acknowledgments The inspiration for the stop codon DNA example came from the ZIP code example in chapter 7 of I<Mastering Regular Expressions>. The author would like to thank Jeff Pinyan, Andrew Johnson, Peter Haworth, Ronald J Kimball, and Joe Smith for all their helpful comments. =cut perl5202delta.pod 0000644 00000030335 15125556335 0007553 0 ustar 00 =encoding utf8 =head1 NAME perl5202delta - what is new for perl v5.20.2 =head1 DESCRIPTION This document describes differences between the 5.20.1 release and the 5.20.2 release. If you are upgrading from an earlier release such as 5.20.0, first read L<perl5201delta>, which describes differences between 5.20.0 and 5.20.1. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.20.1. If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<attributes> has been upgraded from version 0.22 to 0.23. The usage of C<memEQs> in the XS has been corrected. L<[perl #122701]|https://rt.perl.org/Ticket/Display.html?id=122701> =item * L<Data::Dumper> has been upgraded from version 2.151 to 2.151_01. Fixes CVE-2014-4330 by adding a configuration variable/option to limit recursion when dumping deep data structures. =item * L<Errno> has been upgraded from version 1.20_03 to 1.20_05. Warnings when building the XS on Windows with the Visual C++ compiler are now avoided. =item * L<feature> has been upgraded from version 1.36 to 1.36_01. The C<postderef> feature has now been documented. This feature was actually added in Perl 5.20.0 but was accidentally omitted from the feature documentation until now. =item * L<IO::Socket> has been upgraded from version 1.37 to 1.38. Document the limitations of the connected() method. L<[perl #123096]|https://rt.perl.org/Ticket/Display.html?id=123096> =item * L<Module::CoreList> has been upgraded from version 5.020001 to 5.20150214. The list of Perl versions covered has been updated. =item * PathTools has been upgraded from version 3.48 to 3.48_01. A warning from the B<gcc> compiler is now avoided when building the XS. =item * L<PerlIO::scalar> has been upgraded from version 0.18 to 0.18_01. Reading from a position well past the end of the scalar now correctly returns end of file. L<[perl #123443]|https://rt.perl.org/Ticket/Display.html?id=123443> Seeking to a negative position still fails, but no longer leaves the file position set to a negation location. C<eof()> on a C<PerlIO::scalar> handle now properly returns true when the file position is past the 2GB mark on 32-bit systems. =item * L<Storable> has been upgraded from version 2.49 to 2.49_01. Minor grammatical change to the documentation only. =item * L<VMS::DCLsym> has been upgraded from version 1.05 to 1.05_01. Minor formatting change to the documentation only. =item * L<VMS::Stdio> has been upgraded from version 2.4 to 2.41. Minor formatting change to the documentation only. =back =head1 Documentation =head2 New Documentation =head3 L<perlunicook> This document, by Tom Christiansen, provides examples of handling Unicode in Perl. =head2 Changes to Existing Documentation =head3 L<perlexperiment> =over 4 =item * Added reference to subroutine signatures. This feature was actually added in Perl 5.20.0 but was accidentally omitted from the experimental feature documentation until now. =back =head3 L<perlpolicy> =over 4 =item * The process whereby features may graduate from experimental status has now been formally documented. =back =head3 L<perlsyn> =over 4 =item * An ambiguity in the documentation of the ellipsis statement has been corrected. L<[perl #122661]|https://rt.perl.org/Ticket/Display.html?id=122661> =back =head1 Diagnostics The following additions or changes have been made to diagnostic output, including warnings and fatal error messages. For the complete list of diagnostic messages, see L<perldiag>. =head2 Changes to Existing Diagnostics =over 4 =item * L<Bad symbol for scalar|perldiag/"Bad symbol for scalar"> is now documented. This error is not new, but was not previously documented here. =item * L<Missing right brace on \N{}|perldiag/"Missing right brace on \N{}"> is now documented. This error is not new, but was not previously documented here. =back =head1 Testing =over 4 =item * The test script F<re/rt122747.t> has been added to verify that L<perl #122747|https://rt.perl.org/Ticket/Display.html?id=122747> remains fixed. =back =head1 Platform Support =head2 Regained Platforms IRIX and Tru64 platforms are working again. (Some C<make test> failures remain.) =head1 Selected Bug Fixes =over 4 =item * AIX now sets the length in C<< getsockopt >> correctly. L<[perl #120835]|https://rt.perl.org/Ticket/Display.html?id=120835>, L<[cpan #91183]|https://rt.cpan.org/Ticket/Display.html?id=91183>, L<[cpan #85570]|https://rt.cpan.org/Ticket/Display.html?id=85570> =item * In Perl 5.20.0, C<$^N> accidentally had the internal UTF8 flag turned off if accessed from a code block within a regular expression, effectively UTF8-encoding the value. This has been fixed. L<[perl #123135]|https://rt.perl.org/Ticket/Display.html?id=123135> =item * Various cases where the name of a sub is used (autoload, overloading, error messages) used to crash for lexical subs, but have been fixed. =item * An assertion failure when parsing C<sort> with debugging enabled has been fixed. L<[perl #122771]|https://rt.perl.org/Ticket/Display.html?id=122771> =item * Loading UTF8 tables during a regular expression match could cause assertion failures under debugging builds if the previous match used the very same regular expression. L<[perl #122747]|https://rt.perl.org/Ticket/Display.html?id=122747> =item * Due to a mistake in the string-copying logic, copying the value of a state variable could instead steal the value and undefine the variable. This bug, introduced in Perl 5.20, would happen mostly for long strings (1250 chars or more), but could happen for any strings under builds with copy-on-write disabled. L<[perl #123029]|https://rt.perl.org/Ticket/Display.html?id=123029> =item * Fixed a bug that could cause perl to execute an infinite loop during compilation. L<[perl #122995]|https://rt.perl.org/Ticket/Display.html?id=122995> =item * On Win32, restoring in a child pseudo-process a variable that was C<local()>ed in a parent pseudo-process before the C<fork> happened caused memory corruption and a crash in the child pseudo-process (and therefore OS process). L<[perl #40565]|https://rt.perl.org/Ticket/Display.html?id=40565> =item * Tainted constants evaluated at compile time no longer cause unrelated statements to become tainted. L<[perl #122669]|https://rt.perl.org/Ticket/Display.html?id=122669> =item * Calling C<write> on a format with a C<^**> field could produce a panic in sv_chop() if there were insufficient arguments or if the variable used to fill the field was empty. L<[perl #123245]|https://rt.perl.org/Ticket/Display.html?id=123245> =item * In Perl 5.20.0, C<sort CORE::fake> where 'fake' is anything other than a keyword started chopping of the last 6 characters and treating the result as a sort sub name. The previous behaviour of treating "CORE::fake" as a sort sub name has been restored. L<[perl #123410]|https://rt.perl.org/Ticket/Display.html?id=123410> =item * A bug in regular expression patterns that could lead to segfaults and other crashes has been fixed. This occurred only in patterns compiled with C<"/i">, while taking into account the current POSIX locale (this usually means they have to be compiled within the scope of C<S<"use locale">>), and there must be a string of at least 128 consecutive bytes to match. L<[perl #123539]|https://rt.perl.org/Ticket/Display.html?id=123539> =item * C<qr/@array(?{block})/> no longer dies with "Bizarre copy of ARRAY". L<[perl #123344]|https://rt.perl.org/Ticket/Display.html?id=123344> =item * C<gmtime> no longer crashes with not-a-number values. L<[perl #123495]|https://rt.perl.org/Ticket/Display.html?id=123495> =item * Certain syntax errors in substitutions, such as C<< s/${<>{})// >>, would crash, and had done so since Perl 5.10. (In some cases the crash did not start happening until Perl 5.16.) The crash has, of course, been fixed. L<[perl #123542]|https://rt.perl.org/Ticket/Display.html?id=123542> =item * A memory leak in some regular expressions, introduced in Perl 5.20.1, has been fixed. L<[perl #123198]|https://rt.perl.org/Ticket/Display.html?id=123198> =item * C<< formline("@...", "a"); >> would crash. The C<FF_CHECKNL> case in pp_formline() didn't set the pointer used to mark the chop position, which led to the C<FF_MORE> case crashing with a segmentation fault. This has been fixed. L<[perl #123538]|https://rt.perl.org/Ticket/Display.html?id=123538> L<[perl #123622]|https://rt.perl.org/Ticket/Display.html?id=123622> =item * A possible buffer overrun and crash when parsing a literal pattern during regular expression compilation has been fixed. L<[perl #123604]|https://rt.perl.org/Ticket/Display.html?id=123604> =back =head1 Known Problems =over 4 =item * It is a known bug that lexical subroutines cannot be used as the C<SUBNAME> argument to C<sort>. This will be fixed in a future version of Perl. =back =head1 Errata From Previous Releases =over 4 =item * A regression has been fixed that was introduced in Perl 5.20.0 (fixed in Perl 5.20.1 as well as here) in which a UTF-8 encoded regular expression pattern that contains a single ASCII lowercase letter does not match its uppercase counterpart. L<[perl #122655]|https://rt.perl.org/Ticket/Display.html?id=122655> =back =head1 Acknowledgements Perl 5.20.2 represents approximately 5 months of development since Perl 5.20.1 and contains approximately 6,300 lines of changes across 170 files from 34 authors. Excluding auto-generated files, documentation and release tools, there were approximately 1,900 lines of changes to 80 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.20.2: Aaron Crane, Abigail, Andreas Voegele, Andy Dougherty, Anthony Heading, Aristotle Pagaltzis, Chris 'BinGOs' Williams, Craig A. Berry, Daniel Dragan, Doug Bell, Ed J, Father Chrysostomos, Glenn D. Golden, H.Merijn Brand, Hugo van der Sanden, James E Keenan, Jarkko Hietaniemi, Jim Cromie, Karen Etheridge, Karl Williamson, kmx, Matthew Horsfall, Max Maischein, Peter Martini, Rafael Garcia-Suarez, Ricardo Signes, Shlomi Fish, Slaven Rezic, Steffen Müller, Steve Hay, Tadeusz Sośnierz, Tony Cook, Yves Orton, Ævar Arnfjörð Bjarmason. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at https://rt.perl.org/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl5184delta.pod 0000644 00000011042 15125556335 0007556 0 ustar 00 =encoding utf8 =head1 NAME perl5184delta - what is new for perl v5.18.4 =head1 DESCRIPTION This document describes differences between the 5.18.4 release and the 5.18.2 release. B<Please note:> This document ignores perl 5.18.3, a broken release which existed for a few hours only. If you are upgrading from an earlier release such as 5.18.1, first read L<perl5182delta>, which describes differences between 5.18.1 and 5.18.2. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Digest::SHA> has been upgraded from 5.84_01 to 5.84_02. =item * L<perl5db.pl> has been upgraded from version 1.39_10 to 1.39_11. This fixes a crash in tab completion, where available. [perl #120827] Also, filehandle information is properly reset after a pager is run. [perl #121456] =back =head1 Platform Support =head2 Platform-Specific Notes =over 4 =item Win32 =over 4 =item * Introduced by L<perl #113536|https://rt.perl.org/Public/Bug/Display.html?id=113536>, a memory leak on every call to C<system> and backticks (C< `` >), on most Win32 Perls starting from 5.18.0 has been fixed. The memory leak only occurred if you enabled pseudo-fork in your build of Win32 Perl, and were running that build on Server 2003 R2 or newer OS. The leak does not appear on WinXP SP3. [L<perl #121676|https://rt.perl.org/Public/Bug/Display.html?id=121676>] =back =back =head1 Selected Bug Fixes =over 4 =item * The debugger now properly resets filehandles as needed. [perl #121456] =item * A segfault in Digest::SHA has been addressed. [perl #121421] =item * perl can again be built with USE_64_BIT_INT, with Visual C 2003, 32 bit. [perl #120925] =item * A leading { (brace) in formats is properly parsed again. [perl #119973] =item * Copy the values used to perturb hash iteration when cloning an interpreter. This was fairly harmless but caused C<valgrind> to complain. [perl #121336] =item * In Perl v5.18 C<undef *_; goto &sub> and C<local *_; goto &sub> started crashing. This has been fixed. [perl #119949] =back =head1 Acknowledgements Perl 5.18.4 represents approximately 9 months of development since Perl 5.18.2 and contains approximately 2,000 lines of changes across 53 files from 13 authors. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.18.4: Daniel Dragan, David Mitchell, Doug Bell, Father Chrysostomos, Hiroo Hayashi, James E Keenan, Karl Williamson, Mark Shelor, Ricardo Signes, Shlomi Fish, Smylers, Steve Hay, Tony Cook. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perluniprops.pod 0000644 00001536416 15125556335 0010044 0 ustar 00 =begin comment # !!!!!!! DO NOT EDIT THIS FILE !!!!!!! # This file is machine-generated by lib/unicore/mktables from the Unicode # database, Version 13.0.0. Any changes made here will be lost! To change this file, edit lib/unicore/mktables instead. =end comment =head1 NAME perluniprops - Index of Unicode Version 13.0.0 character properties in Perl =head1 DESCRIPTION This document provides information about the portion of the Unicode database that deals with character properties, that is the portion that is defined on single code points. (L</Other information in the Unicode data base> below briefly mentions other data that Unicode provides.) Perl can provide access to all non-provisional Unicode character properties, though not all are enabled by default. The omitted ones are the Unihan properties (accessible via the CPAN module L<Unicode::Unihan>) and certain deprecated or Unicode-internal properties. (An installation may choose to recompile Perl's tables to change this. See L</Unicode character properties that are NOT accepted by Perl>.) For most purposes, access to Unicode properties from the Perl core is through regular expression matches, as described in the next section. For some special purposes, and to access the properties that are not suitable for regular expression matching, all the Unicode character properties that Perl handles are accessible via the standard L<Unicode::UCD> module, as described in the section L</Properties accessible through Unicode::UCD>. Perl also provides some additional extensions and short-cut synonyms for Unicode properties. This document merely lists all available properties and does not attempt to explain what each property really means. There is a brief description of each Perl extension; see L<perlunicode/Other Properties> for more information on these. There is some detail about Blocks, Scripts, General_Category, and Bidi_Class in L<perlunicode>, but to find out about the intricacies of the official Unicode properties, refer to the Unicode standard. A good starting place is L<http://www.unicode.org/reports/tr44/>. Note that you can define your own properties; see L<perlunicode/"User-Defined Character Properties">. =head1 Properties accessible through C<\p{}> and C<\P{}> The Perl regular expression C<\p{}> and C<\P{}> constructs give access to most of the Unicode character properties. The table below shows all these constructs, both single and compound forms. B<Compound forms> consist of two components, separated by an equals sign or a colon. The first component is the property name, and the second component is the particular value of the property to match against, for example, C<\p{Script_Extensions: Greek}> and C<\p{Script_Extensions=Greek}> both mean to match characters whose Script_Extensions property value is Greek. (C<Script_Extensions> is an improved version of the C<Script> property.) B<Single forms>, like C<\p{Greek}>, are mostly Perl-defined shortcuts for their equivalent compound forms. The table shows these equivalences. (In our example, C<\p{Greek}> is a just a shortcut for C<\p{Script_Extensions=Greek}>). There are also a few Perl-defined single forms that are not shortcuts for a compound form. One such is C<\p{Word}>. These are also listed in the table. In parsing these constructs, Perl always ignores Upper/lower case differences everywhere within the {braces}. Thus C<\p{Greek}> means the same thing as C<\p{greek}>. But note that changing the case of the C<"p"> or C<"P"> before the left brace completely changes the meaning of the construct, from "match" (for C<\p{}>) to "doesn't match" (for C<\P{}>). Casing in this document is for improved legibility. Also, white space, hyphens, and underscores are normally ignored everywhere between the {braces}, and hence can be freely added or removed even if the C</x> modifier hasn't been specified on the regular expression. But in the table below a 'B<T>' at the beginning of an entry means that tighter (stricter) rules are used for that entry: =over 4 =over 4 =item Single form (C<\p{name}>) tighter rules: White space, hyphens, and underscores ARE significant except for: =over 4 =item * white space adjacent to a non-word character =item * underscores separating digits in numbers =back That means, for example, that you can freely add or remove white space adjacent to (but within) the braces without affecting the meaning. =item Compound form (C<\p{name=value}> or C<\p{name:value}>) tighter rules: The tighter rules given above for the single form apply to everything to the right of the colon or equals; the looser rules still apply to everything to the left. That means, for example, that you can freely add or remove white space adjacent to (but within) the braces and the colon or equal sign. =back =back Some properties are considered obsolete by Unicode, but still available. There are several varieties of obsolescence: =over 4 =over 4 =item Stabilized A property may be stabilized. Such a determination does not indicate that the property should or should not be used; instead it is a declaration that the property will not be maintained nor extended for newly encoded characters. Such properties are marked with an 'B<S>' in the table. =item Deprecated A property may be deprecated, perhaps because its original intent has been replaced by another property, or because its specification was somehow defective. This means that its use is strongly discouraged, so much so that a warning will be issued if used, unless the regular expression is in the scope of a C<S<no warnings 'deprecated'>> statement. A 'B<D>' flags each such entry in the table, and the entry there for the longest, most descriptive version of the property will give the reason it is deprecated, and perhaps advice. Perl may issue such a warning, even for properties that aren't officially deprecated by Unicode, when there used to be characters or code points that were matched by them, but no longer. This is to warn you that your program may not work like it did on earlier Unicode releases. A deprecated property may be made unavailable in a future Perl version, so it is best to move away from them. A deprecated property may also be stabilized, but this fact is not shown. =item Obsolete Properties marked with an 'B<O>' in the table are considered (plain) obsolete. Generally this designation is given to properties that Unicode once used for internal purposes (but not any longer). =item Discouraged This is not actually a Unicode-specified obsolescence, but applies to certain Perl extensions that are present for backwards compatibility, but are discouraged from being used. These are not obsolete, but their meanings are not stable. Future Unicode versions could force any of these extensions to be removed without warning, replaced by another property with the same name that means something different. An 'B<X>' flags each such entry in the table. Use the equivalent shown instead. In particular, matches in the Block property have single forms defined by Perl that begin with C<"In_">, C<"Is_>, or even with no prefix at all, Like all B<DISCOURAGED> forms, these are not stable. For example, C<\p{Block=Deseret}> can currently be written as C<\p{In_Deseret}>, C<\p{Is_Deseret}>, or C<\p{Deseret}>. But, a new Unicode version may come along that would force Perl to change the meaning of one or more of these, and your program would no longer be correct. Currently there are no such conflicts with the form that begins C<"In_">, but there are many with the other two shortcuts, and Unicode continues to define new properties that begin with C<"In">, so it's quite possible that a conflict will occur in the future. The compound form is guaranteed to not become obsolete, and its meaning is clearer anyway. See L<perlunicode/"Blocks"> for more information about this. User-defined properties must begin with "In" or "Is". These override any Unicode property of the same name. =back =back The table below has two columns. The left column contains the C<\p{}> constructs to look up, possibly preceded by the flags mentioned above; and the right column contains information about them, like a description, or synonyms. The table shows both the single and compound forms for each property that has them. If the left column is a short name for a property, the right column will give its longer, more descriptive name; and if the left column is the longest name, the right column will show any equivalent shortest name, in both single and compound forms if applicable. If braces are not needed to specify a property (e.g., C<\pL>), the left column contains both forms, with and without braces. The right column will also caution you if a property means something different than what might normally be expected. All single forms are Perl extensions; a few compound forms are as well, and are noted as such. Numbers in (parentheses) indicate the total number of Unicode code points matched by the property. For the entries that give the longest, most descriptive version of the property, the count is followed by a list of some of the code points matched by it. The list includes all the matched characters in the 0-255 range, enclosed in the familiar [brackets] the same as a regular expression bracketed character class. Following that, the next few higher matching ranges are also given. To avoid visual ambiguity, the SPACE character is represented as C<\x20>. For emphasis, those properties that match no code points at all are listed as well in a separate section following the table. Most properties match the same code points regardless of whether C<"/i"> case-insensitive matching is specified or not. But a few properties are affected. These are shown with the notation S<C<(/i= I<other_property>)>> in the second column. Under case-insensitive matching they match the same code pode points as the property I<other_property>. There is no description given for most non-Perl defined properties (See L<http://www.unicode.org/reports/tr44/> for that). For compactness, 'B<*>' is used as a wildcard instead of showing all possible combinations. For example, entries like: \p{Gc: *} \p{General_Category: *} mean that 'Gc' is a synonym for 'General_Category', and anything that is valid for the latter is also valid for the former. Similarly, \p{Is_*} \p{*} means that if and only if, for example, C<\p{Foo}> exists, then C<\p{Is_Foo}> and C<\p{IsFoo}> are also valid and all mean the same thing. And similarly, C<\p{Foo=Bar}> means the same as C<\p{Is_Foo=Bar}> and C<\p{IsFoo=Bar}>. "*" here is restricted to something not beginning with an underscore. Also, in binary properties, 'Yes', 'T', and 'True' are all synonyms for 'Y'. And 'No', 'F', and 'False' are all synonyms for 'N'. The table shows 'Y*' and 'N*' to indicate this, and doesn't have separate entries for the other possibilities. Note that not all properties which have values 'Yes' and 'No' are binary, and they have all their values spelled out without using this wild card, and a C<NOT> clause in their description that highlights their not being binary. These also require the compound form to match them, whereas true binary properties have both single and compound forms available. Note that all non-essential underscores are removed in the display of the short names below. B<Legend summary:> =over 4 =item Z<>B<*> is a wild-card =item B<(\d+)> in the info column gives the number of Unicode code points matched by this property. =item B<D> means this is deprecated. =item B<O> means this is obsolete. =item B<S> means this is stabilized. =item B<T> means tighter (stricter) name matching applies. =item B<X> means use of this form is discouraged, and may not be stable. =back NAME INFO \p{Adlam} \p{Script_Extensions=Adlam} (Short: \p{Adlm}; NOT \p{Block=Adlam}) (89) \p{Adlm} \p{Adlam} (= \p{Script_Extensions=Adlam}) (NOT \p{Block=Adlam}) (89) X \p{Aegean_Numbers} \p{Block=Aegean_Numbers} (64) T \p{Age: 1.1} \p{Age=V1_1} (33_979) \p{Age: V1_1} Code point's usage introduced in version 1.1 (33_979: U+0000..01F5, U+01FA..0217, U+0250..02A8, U+02B0..02DE, U+02E0..02E9, U+0300..0345 ...) T \p{Age: 2.0} \p{Age=V2_0} (144_521) \p{Age: V2_0} Code point's usage was introduced in version 2.0; See also Property 'Present_In' (144_521: U+0591..05A1, U+05A3..05AF, U+05C4, U+0F00..0F47, U+0F49..0F69, U+0F71..0F8B ...) T \p{Age: 2.1} \p{Age=V2_1} (2) \p{Age: V2_1} Code point's usage was introduced in version 2.1; See also Property 'Present_In' (2: U+20AC, U+FFFC) T \p{Age: 3.0} \p{Age=V3_0} (10_307) \p{Age: V3_0} Code point's usage was introduced in version 3.0; See also Property 'Present_In' (10_307: U+01F6..01F9, U+0218..021F, U+0222..0233, U+02A9..02AD, U+02DF, U+02EA..02EE ...) T \p{Age: 3.1} \p{Age=V3_1} (44_978) \p{Age: V3_1} Code point's usage was introduced in version 3.1; See also Property 'Present_In' (44_978: U+03F4..03F5, U+FDD0..FDEF, U+10300..1031E, U+10320..10323, U+10330..1034A, U+10400..10425 ...) T \p{Age: 3.2} \p{Age=V3_2} (1016) \p{Age: V3_2} Code point's usage was introduced in version 3.2; See also Property 'Present_In' (1016: U+0220, U+034F, U+0363..036F, U+03D8..03D9, U+03F6, U+048A..048B ...) T \p{Age: 4.0} \p{Age=V4_0} (1226) \p{Age: V4_0} Code point's usage was introduced in version 4.0; See also Property 'Present_In' (1226: U+0221, U+0234..0236, U+02AE..02AF, U+02EF..02FF, U+0350..0357, U+035D..035F ...) T \p{Age: 4.1} \p{Age=V4_1} (1273) \p{Age: V4_1} Code point's usage was introduced in version 4.1; See also Property 'Present_In' (1273: U+0237..0241, U+0358..035C, U+03FC..03FF, U+04F6..04F7, U+05A2, U+05C5..05C7 ...) T \p{Age: 5.0} \p{Age=V5_0} (1369) \p{Age: V5_0} Code point's usage was introduced in version 5.0; See also Property 'Present_In' (1369: U+0242..024F, U+037B..037D, U+04CF, U+04FA..04FF, U+0510..0513, U+05BA ...) T \p{Age: 5.1} \p{Age=V5_1} (1624) \p{Age: V5_1} Code point's usage was introduced in version 5.1; See also Property 'Present_In' (1624: U+0370..0373, U+0376..0377, U+03CF, U+0487, U+0514..0523, U+0606..060A ...) T \p{Age: 5.2} \p{Age=V5_2} (6648) \p{Age: V5_2} Code point's usage was introduced in version 5.2; See also Property 'Present_In' (6648: U+0524..0525, U+0800..082D, U+0830..083E, U+0900, U+094E, U+0955 ...) T \p{Age: 6.0} \p{Age=V6_0} (2088) \p{Age: V6_0} Code point's usage was introduced in version 6.0; See also Property 'Present_In' (2088: U+0526..0527, U+0620, U+065F, U+0840..085B, U+085E, U+093A..093B ...) T \p{Age: 6.1} \p{Age=V6_1} (732) \p{Age: V6_1} Code point's usage was introduced in version 6.1; See also Property 'Present_In' (732: U+058F, U+0604, U+08A0, U+08A2..08AC, U+08E4..08FE, U+0AF0 ...) T \p{Age: 6.2} \p{Age=V6_2} (1) \p{Age: V6_2} Code point's usage was introduced in version 6.2; See also Property 'Present_In' (1: U+20BA) T \p{Age: 6.3} \p{Age=V6_3} (5) \p{Age: V6_3} Code point's usage was introduced in version 6.3; See also Property 'Present_In' (5: U+061C, U+2066..2069) T \p{Age: 7.0} \p{Age=V7_0} (2834) \p{Age: V7_0} Code point's usage was introduced in version 7.0; See also Property 'Present_In' (2834: U+037F, U+0528..052F, U+058D..058E, U+0605, U+08A1, U+08AD..08B2 ...) T \p{Age: 8.0} \p{Age=V8_0} (7716) \p{Age: V8_0} Code point's usage was introduced in version 8.0; See also Property 'Present_In' (7716: U+08B3..08B4, U+08E3, U+0AF9, U+0C5A, U+0D5F, U+13F5 ...) T \p{Age: 9.0} \p{Age=V9_0} (7500) \p{Age: V9_0} Code point's usage was introduced in version 9.0; See also Property 'Present_In' (7500: U+08B6..08BD, U+08D4..08E2, U+0C80, U+0D4F, U+0D54..0D56, U+0D58..0D5E ...) T \p{Age: 10.0} \p{Age=V10_0} (8518) \p{Age: V10_0} Code point's usage was introduced in version 10.0; See also Property 'Present_In' (8518: U+0860..086A, U+09FC..09FD, U+0AFA..0AFF, U+0D00, U+0D3B..0D3C, U+1CF7 ...) T \p{Age: 11.0} \p{Age=V11_0} (684) \p{Age: V11_0} Code point's usage was introduced in version 11.0; See also Property 'Present_In' (684: U+0560, U+0588, U+05EF, U+07FD..07FF, U+08D3, U+09FE ...) T \p{Age: 12.0} \p{Age=V12_0} (554) \p{Age: V12_0} Code point's usage was introduced in version 12.0; See also Property 'Present_In' (554: U+0C77, U+0E86, U+0E89, U+0E8C, U+0E8E..0E93, U+0E98 ...) T \p{Age: 12.1} \p{Age=V12_1} (1) \p{Age: V12_1} Code point's usage was introduced in version 12.1; See also Property 'Present_In' (1: U+32FF) T \p{Age: 13.0} \p{Age=V13_0} (5930) \p{Age: V13_0} Code point's usage was introduced in version 13.0; See also Property 'Present_In' (5930: U+08BE..08C7, U+0B55, U+0D04, U+0D81, U+1ABF..1AC0, U+2B97 ...) \p{Age: NA} \p{Age=Unassigned} (830_606 plus all above-Unicode code points) \p{Age: Unassigned} Code point's usage has not been assigned in any Unicode release thus far. (Short: \p{Age=NA}) (830_606 plus all above-Unicode code points: U+0378..0379, U+0380..0383, U+038B, U+038D, U+03A2, U+0530 ...) \p{Aghb} \p{Caucasian_Albanian} (= \p{Script_Extensions= Caucasian_Albanian}) (NOT \p{Block= Caucasian_Albanian}) (53) \p{AHex} \p{PosixXDigit} (= \p{ASCII_Hex_Digit=Y}) (22) \p{AHex: *} \p{ASCII_Hex_Digit: *} \p{Ahom} \p{Script_Extensions=Ahom} (NOT \p{Block= Ahom}) (58) X \p{Alchemical} \p{Alchemical_Symbols} (= \p{Block= Alchemical_Symbols}) (128) X \p{Alchemical_Symbols} \p{Block=Alchemical_Symbols} (Short: \p{InAlchemical}) (128) \p{All} All code points, including those above Unicode. Same as qr/./s (1_114_112 plus all above-Unicode code points: U+0000..infinity) \p{Alnum} \p{XPosixAlnum} (133_525) \p{Alpha} \p{XPosixAlpha} (= \p{Alphabetic=Y}) (132_875) \p{Alpha: *} \p{Alphabetic: *} \p{Alphabetic} \p{XPosixAlpha} (= \p{Alphabetic=Y}) (132_875) \p{Alphabetic: N*} (Short: \p{Alpha=N}, \P{Alpha}) (981_237 plus all above-Unicode code points: [\x00-\x20!\"#\$\%&\'\(\)*+,\-.\/0-9:;<= >?\@\[\\\]\^_`\{\|\}~\x7f-\xa9\xab-\xb4 \xb6-\xb9\xbb-\xbf\xd7\xf7], U+02C2..02C5, U+02D2..02DF, U+02E5..02EB, U+02ED, U+02EF..0344 ...) \p{Alphabetic: Y*} (Short: \p{Alpha=Y}, \p{Alpha}) (132_875: [A-Za-z\xaa\xb5\xba\xc0-\xd6\xd8-\xf6 \xf8-\xff], U+0100..02C1, U+02C6..02D1, U+02E0..02E4, U+02EC, U+02EE ...) X \p{Alphabetic_PF} \p{Alphabetic_Presentation_Forms} (= \p{Block=Alphabetic_Presentation_Forms}) (80) X \p{Alphabetic_Presentation_Forms} \p{Block= Alphabetic_Presentation_Forms} (Short: \p{InAlphabeticPF}) (80) \p{Anatolian_Hieroglyphs} \p{Script_Extensions= Anatolian_Hieroglyphs} (Short: \p{Hluw}; NOT \p{Block=Anatolian_Hieroglyphs}) (583) X \p{Ancient_Greek_Music} \p{Ancient_Greek_Musical_Notation} (= \p{Block= Ancient_Greek_Musical_Notation}) (80) X \p{Ancient_Greek_Musical_Notation} \p{Block= Ancient_Greek_Musical_Notation} (Short: \p{InAncientGreekMusic}) (80) X \p{Ancient_Greek_Numbers} \p{Block=Ancient_Greek_Numbers} (80) X \p{Ancient_Symbols} \p{Block=Ancient_Symbols} (64) \p{Any} All Unicode code points (1_114_112: U+0000..10FFFF) \p{Arab} \p{Arabic} (= \p{Script_Extensions= Arabic}) (NOT \p{Block=Arabic}) (1335) \p{Arabic} \p{Script_Extensions=Arabic} (Short: \p{Arab}; NOT \p{Block=Arabic}) (1335) X \p{Arabic_Ext_A} \p{Arabic_Extended_A} (= \p{Block= Arabic_Extended_A}) (96) X \p{Arabic_Extended_A} \p{Block=Arabic_Extended_A} (Short: \p{InArabicExtA}) (96) X \p{Arabic_Math} \p{Arabic_Mathematical_Alphabetic_Symbols} (= \p{Block= Arabic_Mathematical_Alphabetic_Symbols}) (256) X \p{Arabic_Mathematical_Alphabetic_Symbols} \p{Block= Arabic_Mathematical_Alphabetic_Symbols} (Short: \p{InArabicMath}) (256) X \p{Arabic_PF_A} \p{Arabic_Presentation_Forms_A} (= \p{Block=Arabic_Presentation_Forms_A}) (688) X \p{Arabic_PF_B} \p{Arabic_Presentation_Forms_B} (= \p{Block=Arabic_Presentation_Forms_B}) (144) X \p{Arabic_Presentation_Forms_A} \p{Block= Arabic_Presentation_Forms_A} (Short: \p{InArabicPFA}) (688) X \p{Arabic_Presentation_Forms_B} \p{Block= Arabic_Presentation_Forms_B} (Short: \p{InArabicPFB}) (144) X \p{Arabic_Sup} \p{Arabic_Supplement} (= \p{Block= Arabic_Supplement}) (48) X \p{Arabic_Supplement} \p{Block=Arabic_Supplement} (Short: \p{InArabicSup}) (48) \p{Armenian} \p{Script_Extensions=Armenian} (Short: \p{Armn}; NOT \p{Block=Armenian}) (96) \p{Armi} \p{Imperial_Aramaic} (= \p{Script_Extensions=Imperial_Aramaic}) (NOT \p{Block=Imperial_Aramaic}) (31) \p{Armn} \p{Armenian} (= \p{Script_Extensions= Armenian}) (NOT \p{Block=Armenian}) (96) X \p{Arrows} \p{Block=Arrows} (112) \p{ASCII} \p{Block=Basic_Latin} (128) \p{ASCII_Hex_Digit} \p{PosixXDigit} (= \p{ASCII_Hex_Digit=Y}) (22) \p{ASCII_Hex_Digit: N*} (Short: \p{AHex=N}, \P{AHex}) (1_114_090 plus all above-Unicode code points: [\x00-\x20!\"#\$\%&\'\(\)*+,\-.\/:;<=>? \@G-Z\[\\\]\^_`g-z\{\|\}~\x7f-\xff], U+0100..infinity) \p{ASCII_Hex_Digit: Y*} (Short: \p{AHex=Y}, \p{AHex}) (22: [0-9A- Fa-f]) \p{Assigned} All assigned code points (283_440: U+0000..0377, U+037A..037F, U+0384..038A, U+038C, U+038E..03A1, U+03A3..052F ...) \p{Avestan} \p{Script_Extensions=Avestan} (Short: \p{Avst}; NOT \p{Block=Avestan}) (61) \p{Avst} \p{Avestan} (= \p{Script_Extensions= Avestan}) (NOT \p{Block=Avestan}) (61) \p{Bali} \p{Balinese} (= \p{Script_Extensions= Balinese}) (NOT \p{Block=Balinese}) (121) \p{Balinese} \p{Script_Extensions=Balinese} (Short: \p{Bali}; NOT \p{Block=Balinese}) (121) \p{Bamu} \p{Bamum} (= \p{Script_Extensions=Bamum}) (NOT \p{Block=Bamum}) (657) \p{Bamum} \p{Script_Extensions=Bamum} (Short: \p{Bamu}; NOT \p{Block=Bamum}) (657) X \p{Bamum_Sup} \p{Bamum_Supplement} (= \p{Block= Bamum_Supplement}) (576) X \p{Bamum_Supplement} \p{Block=Bamum_Supplement} (Short: \p{InBamumSup}) (576) X \p{Basic_Latin} \p{ASCII} (= \p{Block=Basic_Latin}) (128) \p{Bass} \p{Bassa_Vah} (= \p{Script_Extensions= Bassa_Vah}) (NOT \p{Block=Bassa_Vah}) (36) \p{Bassa_Vah} \p{Script_Extensions=Bassa_Vah} (Short: \p{Bass}; NOT \p{Block=Bassa_Vah}) (36) \p{Batak} \p{Script_Extensions=Batak} (Short: \p{Batk}; NOT \p{Block=Batak}) (56) \p{Batk} \p{Batak} (= \p{Script_Extensions=Batak}) (NOT \p{Block=Batak}) (56) \p{Bc: *} \p{Bidi_Class: *} \p{Beng} \p{Bengali} (= \p{Script_Extensions= Bengali}) (NOT \p{Block=Bengali}) (113) \p{Bengali} \p{Script_Extensions=Bengali} (Short: \p{Beng}; NOT \p{Block=Bengali}) (113) \p{Bhaiksuki} \p{Script_Extensions=Bhaiksuki} (Short: \p{Bhks}; NOT \p{Block=Bhaiksuki}) (97) \p{Bhks} \p{Bhaiksuki} (= \p{Script_Extensions= Bhaiksuki}) (NOT \p{Block=Bhaiksuki}) (97) \p{Bidi_C} \p{Bidi_Control} (= \p{Bidi_Control=Y}) (12) \p{Bidi_C: *} \p{Bidi_Control: *} \p{Bidi_Class: AL} \p{Bidi_Class=Arabic_Letter} (1698) \p{Bidi_Class: AN} \p{Bidi_Class=Arabic_Number} (61) \p{Bidi_Class: Arabic_Letter} (Short: \p{Bc=AL}) (1698: U+0608, U+060B, U+060D, U+061B..064A, U+066D..066F, U+0671..06D5 ...) \p{Bidi_Class: Arabic_Number} (Short: \p{Bc=AN}) (61: U+0600..0605, U+0660..0669, U+066B..066C, U+06DD, U+08E2, U+10D30..10D39 ...) \p{Bidi_Class: B} \p{Bidi_Class=Paragraph_Separator} (7) \p{Bidi_Class: BN} \p{Bidi_Class=Boundary_Neutral} (4016) \p{Bidi_Class: Boundary_Neutral} (Short: \p{Bc=BN}) (4016: [^\t\n \cK\f\r\x1c-\x7e\x85\xa0-\xac\xae-\xff], U+180E, U+200B..200D, U+2060..2065, U+206A..206F, U+FDD0..FDEF ...) \p{Bidi_Class: Common_Separator} (Short: \p{Bc=CS}) (15: [,.\/: \xa0], U+060C, U+202F, U+2044, U+FE50, U+FE52 ...) \p{Bidi_Class: CS} \p{Bidi_Class=Common_Separator} (15) \p{Bidi_Class: EN} \p{Bidi_Class=European_Number} (168) \p{Bidi_Class: ES} \p{Bidi_Class=European_Separator} (12) \p{Bidi_Class: ET} \p{Bidi_Class=European_Terminator} (92) \p{Bidi_Class: European_Number} (Short: \p{Bc=EN}) (168: [0-9\xb2- \xb3\xb9], U+06F0..06F9, U+2070, U+2074..2079, U+2080..2089, U+2488..249B ...) \p{Bidi_Class: European_Separator} (Short: \p{Bc=ES}) (12: [+\-], U+207A..207B, U+208A..208B, U+2212, U+FB29, U+FE62..FE63 ...) \p{Bidi_Class: European_Terminator} (Short: \p{Bc=ET}) (92: [#\$ \%\xa2-\xa5\xb0-\xb1], U+058F, U+0609..060A, U+066A, U+09F2..09F3, U+09FB ...) \p{Bidi_Class: First_Strong_Isolate} (Short: \p{Bc=FSI}) (1: U+2068) \p{Bidi_Class: FSI} \p{Bidi_Class=First_Strong_Isolate} (1) \p{Bidi_Class: L} \p{Bidi_Class=Left_To_Right} (1_096_473 plus all above-Unicode code points) \p{Bidi_Class: Left_To_Right} (Short: \p{Bc=L}) (1_096_473 plus all above-Unicode code points: [A-Za-z \xaa\xb5\xba\xc0-\xd6\xd8-\xf6\xf8- \xff], U+0100..02B8, U+02BB..02C1, U+02D0..02D1, U+02E0..02E4, U+02EE ...) \p{Bidi_Class: Left_To_Right_Embedding} (Short: \p{Bc=LRE}) (1: U+202A) \p{Bidi_Class: Left_To_Right_Isolate} (Short: \p{Bc=LRI}) (1: U+2066) \p{Bidi_Class: Left_To_Right_Override} (Short: \p{Bc=LRO}) (1: U+202D) \p{Bidi_Class: LRE} \p{Bidi_Class=Left_To_Right_Embedding} (1) \p{Bidi_Class: LRI} \p{Bidi_Class=Left_To_Right_Isolate} (1) \p{Bidi_Class: LRO} \p{Bidi_Class=Left_To_Right_Override} (1) \p{Bidi_Class: Nonspacing_Mark} (Short: \p{Bc=NSM}) (1847: U+0300..036F, U+0483..0489, U+0591..05BD, U+05BF, U+05C1..05C2, U+05C4..05C5 ...) \p{Bidi_Class: NSM} \p{Bidi_Class=Nonspacing_Mark} (1847) \p{Bidi_Class: ON} \p{Bidi_Class=Other_Neutral} (5931) \p{Bidi_Class: Other_Neutral} (Short: \p{Bc=ON}) (5931: [!\"&\' \(\)*;<=>?\@\[\\\]\^_`\{\|\}~\xa1\xa6- \xa9\xab-\xac\xae-\xaf\xb4\xb6-\xb8\xbb- \xbf\xd7\xf7], U+02B9..02BA, U+02C2..02CF, U+02D2..02DF, U+02E5..02ED, U+02EF..02FF ...) \p{Bidi_Class: Paragraph_Separator} (Short: \p{Bc=B}) (7: [\n\r \x1c-\x1e\x85], U+2029) \p{Bidi_Class: PDF} \p{Bidi_Class=Pop_Directional_Format} (1) \p{Bidi_Class: PDI} \p{Bidi_Class=Pop_Directional_Isolate} (1) \p{Bidi_Class: Pop_Directional_Format} (Short: \p{Bc=PDF}) (1: U+202C) \p{Bidi_Class: Pop_Directional_Isolate} (Short: \p{Bc=PDI}) (1: U+2069) \p{Bidi_Class: R} \p{Bidi_Class=Right_To_Left} (3763) \p{Bidi_Class: Right_To_Left} (Short: \p{Bc=R}) (3763: U+0590, U+05BE, U+05C0, U+05C3, U+05C6, U+05C8..05FF ...) \p{Bidi_Class: Right_To_Left_Embedding} (Short: \p{Bc=RLE}) (1: U+202B) \p{Bidi_Class: Right_To_Left_Isolate} (Short: \p{Bc=RLI}) (1: U+2067) \p{Bidi_Class: Right_To_Left_Override} (Short: \p{Bc=RLO}) (1: U+202E) \p{Bidi_Class: RLE} \p{Bidi_Class=Right_To_Left_Embedding} (1) \p{Bidi_Class: RLI} \p{Bidi_Class=Right_To_Left_Isolate} (1) \p{Bidi_Class: RLO} \p{Bidi_Class=Right_To_Left_Override} (1) \p{Bidi_Class: S} \p{Bidi_Class=Segment_Separator} (3) \p{Bidi_Class: Segment_Separator} (Short: \p{Bc=S}) (3: [\t\cK \x1f]) \p{Bidi_Class: White_Space} (Short: \p{Bc=WS}) (17: [\f\x20], U+1680, U+2000..200A, U+2028, U+205F, U+3000) \p{Bidi_Class: WS} \p{Bidi_Class=White_Space} (17) \p{Bidi_Control} \p{Bidi_Control=Y} (Short: \p{BidiC}) (12) \p{Bidi_Control: N*} (Short: \p{BidiC=N}, \P{BidiC}) (1_114_100 plus all above-Unicode code points: U+0000..061B, U+061D..200D, U+2010..2029, U+202F..2065, U+206A..infinity) \p{Bidi_Control: Y*} (Short: \p{BidiC=Y}, \p{BidiC}) (12: U+061C, U+200E..200F, U+202A..202E, U+2066..2069) \p{Bidi_M} \p{Bidi_Mirrored} (= \p{Bidi_Mirrored=Y}) (545) \p{Bidi_M: *} \p{Bidi_Mirrored: *} \p{Bidi_Mirrored} \p{Bidi_Mirrored=Y} (Short: \p{BidiM}) (545) \p{Bidi_Mirrored: N*} (Short: \p{BidiM=N}, \P{BidiM}) (1_113_567 plus all above-Unicode code points: [\x00-\x20!\"#\$\%&\'*+,\-.\/0-9:;=?\@A- Z\\\^_`a-z\|~\x7f-\xaa\xac-\xba\xbc- \xff], U+0100..0F39, U+0F3E..169A, U+169D..2038, U+203B..2044, U+2047..207C ...) \p{Bidi_Mirrored: Y*} (Short: \p{BidiM=Y}, \p{BidiM}) (545: [\(\)<>\[\]\{\}\xab\xbb], U+0F3A..0F3D, U+169B..169C, U+2039..203A, U+2045..2046, U+207D..207E ...) \p{Bidi_Paired_Bracket_Type: C} \p{Bidi_Paired_Bracket_Type=Close} (60) \p{Bidi_Paired_Bracket_Type: Close} (Short: \p{Bpt=C}) (60: [\)\] \}], U+0F3B, U+0F3D, U+169C, U+2046, U+207E ...) \p{Bidi_Paired_Bracket_Type: N} \p{Bidi_Paired_Bracket_Type=None} (1_113_992 plus all above-Unicode code points) \p{Bidi_Paired_Bracket_Type: None} (Short: \p{Bpt=N}) (1_113_992 plus all above-Unicode code points: [\x00-\x20!\"#\$\%&\'*+,\-.\/0-9:;<=>? \@A-Z\\\^_`a-z\|~\x7f-\xff], U+0100..0F39, U+0F3E..169A, U+169D..2044, U+2047..207C, U+207F..208C ...) \p{Bidi_Paired_Bracket_Type: O} \p{Bidi_Paired_Bracket_Type=Open} (60) \p{Bidi_Paired_Bracket_Type: Open} (Short: \p{Bpt=O}) (60: [\(\[\{], U+0F3A, U+0F3C, U+169B, U+2045, U+207D ...) \p{Blank} \p{XPosixBlank} (18) \p{Blk: *} \p{Block: *} \p{Block: Adlam} (NOT \p{Adlam} NOR \p{Is_Adlam}) (96: U+1E900..1E95F) \p{Block: Aegean_Numbers} (64: U+10100..1013F) \p{Block: Ahom} (NOT \p{Ahom} NOR \p{Is_Ahom}) (64: U+11700..1173F) \p{Block: Alchemical} \p{Block=Alchemical_Symbols} (128) \p{Block: Alchemical_Symbols} (Short: \p{Blk=Alchemical}) (128: U+1F700..1F77F) \p{Block: Alphabetic_PF} \p{Block=Alphabetic_Presentation_Forms} (80) \p{Block: Alphabetic_Presentation_Forms} (Short: \p{Blk= AlphabeticPF}) (80: U+FB00..FB4F) \p{Block: Anatolian_Hieroglyphs} (NOT \p{Anatolian_Hieroglyphs} NOR \p{Is_Anatolian_Hieroglyphs}) (640: U+14400..1467F) \p{Block: Ancient_Greek_Music} \p{Block= Ancient_Greek_Musical_Notation} (80) \p{Block: Ancient_Greek_Musical_Notation} (Short: \p{Blk= AncientGreekMusic}) (80: U+1D200..1D24F) \p{Block: Ancient_Greek_Numbers} (80: U+10140..1018F) \p{Block: Ancient_Symbols} (64: U+10190..101CF) \p{Block: Arabic} (NOT \p{Arabic} NOR \p{Is_Arabic}) (256: U+0600..06FF) \p{Block: Arabic_Ext_A} \p{Block=Arabic_Extended_A} (96) \p{Block: Arabic_Extended_A} (Short: \p{Blk=ArabicExtA}) (96: U+08A0..08FF) \p{Block: Arabic_Math} \p{Block= Arabic_Mathematical_Alphabetic_Symbols} (256) \p{Block: Arabic_Mathematical_Alphabetic_Symbols} (Short: \p{Blk= ArabicMath}) (256: U+1EE00..1EEFF) \p{Block: Arabic_PF_A} \p{Block=Arabic_Presentation_Forms_A} (688) \p{Block: Arabic_PF_B} \p{Block=Arabic_Presentation_Forms_B} (144) \p{Block: Arabic_Presentation_Forms_A} (Short: \p{Blk=ArabicPFA}) (688: U+FB50..FDFF) \p{Block: Arabic_Presentation_Forms_B} (Short: \p{Blk=ArabicPFB}) (144: U+FE70..FEFF) \p{Block: Arabic_Sup} \p{Block=Arabic_Supplement} (48) \p{Block: Arabic_Supplement} (Short: \p{Blk=ArabicSup}) (48: U+0750..077F) \p{Block: Armenian} (NOT \p{Armenian} NOR \p{Is_Armenian}) (96: U+0530..058F) \p{Block: Arrows} (112: U+2190..21FF) \p{Block: ASCII} \p{Block=Basic_Latin} (128) \p{Block: Avestan} (NOT \p{Avestan} NOR \p{Is_Avestan}) (64: U+10B00..10B3F) \p{Block: Balinese} (NOT \p{Balinese} NOR \p{Is_Balinese}) (128: U+1B00..1B7F) \p{Block: Bamum} (NOT \p{Bamum} NOR \p{Is_Bamum}) (96: U+A6A0..A6FF) \p{Block: Bamum_Sup} \p{Block=Bamum_Supplement} (576) \p{Block: Bamum_Supplement} (Short: \p{Blk=BamumSup}) (576: U+16800..16A3F) \p{Block: Basic_Latin} (Short: \p{Blk=ASCII}) (128: [\x00-\x7f]) \p{Block: Bassa_Vah} (NOT \p{Bassa_Vah} NOR \p{Is_Bassa_Vah}) (48: U+16AD0..16AFF) \p{Block: Batak} (NOT \p{Batak} NOR \p{Is_Batak}) (64: U+1BC0..1BFF) \p{Block: Bengali} (NOT \p{Bengali} NOR \p{Is_Bengali}) (128: U+0980..09FF) \p{Block: Bhaiksuki} (NOT \p{Bhaiksuki} NOR \p{Is_Bhaiksuki}) (112: U+11C00..11C6F) \p{Block: Block_Elements} (32: U+2580..259F) \p{Block: Bopomofo} (NOT \p{Bopomofo} NOR \p{Is_Bopomofo}) (48: U+3100..312F) \p{Block: Bopomofo_Ext} \p{Block=Bopomofo_Extended} (32) \p{Block: Bopomofo_Extended} (Short: \p{Blk=BopomofoExt}) (32: U+31A0..31BF) \p{Block: Box_Drawing} (128: U+2500..257F) \p{Block: Brahmi} (NOT \p{Brahmi} NOR \p{Is_Brahmi}) (128: U+11000..1107F) \p{Block: Braille} \p{Block=Braille_Patterns} (256) \p{Block: Braille_Patterns} (Short: \p{Blk=Braille}) (256: U+2800..28FF) \p{Block: Buginese} (NOT \p{Buginese} NOR \p{Is_Buginese}) (32: U+1A00..1A1F) \p{Block: Buhid} (NOT \p{Buhid} NOR \p{Is_Buhid}) (32: U+1740..175F) \p{Block: Byzantine_Music} \p{Block=Byzantine_Musical_Symbols} (256) \p{Block: Byzantine_Musical_Symbols} (Short: \p{Blk= ByzantineMusic}) (256: U+1D000..1D0FF) \p{Block: Canadian_Syllabics} \p{Block= Unified_Canadian_Aboriginal_Syllabics} (640) \p{Block: Carian} (NOT \p{Carian} NOR \p{Is_Carian}) (64: U+102A0..102DF) \p{Block: Caucasian_Albanian} (NOT \p{Caucasian_Albanian} NOR \p{Is_Caucasian_Albanian}) (64: U+10530..1056F) \p{Block: Chakma} (NOT \p{Chakma} NOR \p{Is_Chakma}) (80: U+11100..1114F) \p{Block: Cham} (NOT \p{Cham} NOR \p{Is_Cham}) (96: U+AA00..AA5F) \p{Block: Cherokee} (NOT \p{Cherokee} NOR \p{Is_Cherokee}) (96: U+13A0..13FF) \p{Block: Cherokee_Sup} \p{Block=Cherokee_Supplement} (80) \p{Block: Cherokee_Supplement} (Short: \p{Blk=CherokeeSup}) (80: U+AB70..ABBF) \p{Block: Chess_Symbols} (112: U+1FA00..1FA6F) \p{Block: Chorasmian} (NOT \p{Chorasmian} NOR \p{Is_Chorasmian}) (48: U+10FB0..10FDF) \p{Block: CJK} \p{Block=CJK_Unified_Ideographs} (20_992) \p{Block: CJK_Compat} \p{Block=CJK_Compatibility} (256) \p{Block: CJK_Compat_Forms} \p{Block=CJK_Compatibility_Forms} (32) \p{Block: CJK_Compat_Ideographs} \p{Block= CJK_Compatibility_Ideographs} (512) \p{Block: CJK_Compat_Ideographs_Sup} \p{Block= CJK_Compatibility_Ideographs_Supplement} (544) \p{Block: CJK_Compatibility} (Short: \p{Blk=CJKCompat}) (256: U+3300..33FF) \p{Block: CJK_Compatibility_Forms} (Short: \p{Blk=CJKCompatForms}) (32: U+FE30..FE4F) \p{Block: CJK_Compatibility_Ideographs} (Short: \p{Blk= CJKCompatIdeographs}) (512: U+F900..FAFF) \p{Block: CJK_Compatibility_Ideographs_Supplement} (Short: \p{Blk= CJKCompatIdeographsSup}) (544: U+2F800..2FA1F) \p{Block: CJK_Ext_A} \p{Block= CJK_Unified_Ideographs_Extension_A} (6592) \p{Block: CJK_Ext_B} \p{Block= CJK_Unified_Ideographs_Extension_B} (42_720) \p{Block: CJK_Ext_C} \p{Block= CJK_Unified_Ideographs_Extension_C} (4160) \p{Block: CJK_Ext_D} \p{Block= CJK_Unified_Ideographs_Extension_D} (224) \p{Block: CJK_Ext_E} \p{Block= CJK_Unified_Ideographs_Extension_E} (5776) \p{Block: CJK_Ext_F} \p{Block= CJK_Unified_Ideographs_Extension_F} (7488) \p{Block: CJK_Ext_G} \p{Block= CJK_Unified_Ideographs_Extension_G} (4944) \p{Block: CJK_Radicals_Sup} \p{Block=CJK_Radicals_Supplement} (128) \p{Block: CJK_Radicals_Supplement} (Short: \p{Blk=CJKRadicalsSup}) (128: U+2E80..2EFF) \p{Block: CJK_Strokes} (48: U+31C0..31EF) \p{Block: CJK_Symbols} \p{Block=CJK_Symbols_And_Punctuation} (64) \p{Block: CJK_Symbols_And_Punctuation} (Short: \p{Blk=CJKSymbols}) (64: U+3000..303F) \p{Block: CJK_Unified_Ideographs} (Short: \p{Blk=CJK}) (20_992: U+4E00..9FFF) \p{Block: CJK_Unified_Ideographs_Extension_A} (Short: \p{Blk= CJKExtA}) (6592: U+3400..4DBF) \p{Block: CJK_Unified_Ideographs_Extension_B} (Short: \p{Blk= CJKExtB}) (42_720: U+20000..2A6DF) \p{Block: CJK_Unified_Ideographs_Extension_C} (Short: \p{Blk= CJKExtC}) (4160: U+2A700..2B73F) \p{Block: CJK_Unified_Ideographs_Extension_D} (Short: \p{Blk= CJKExtD}) (224: U+2B740..2B81F) \p{Block: CJK_Unified_Ideographs_Extension_E} (Short: \p{Blk= CJKExtE}) (5776: U+2B820..2CEAF) \p{Block: CJK_Unified_Ideographs_Extension_F} (Short: \p{Blk= CJKExtF}) (7488: U+2CEB0..2EBEF) \p{Block: CJK_Unified_Ideographs_Extension_G} (Short: \p{Blk= CJKExtG}) (4944: U+30000..3134F) \p{Block: Combining_Diacritical_Marks} (Short: \p{Blk= Diacriticals}) (112: U+0300..036F) \p{Block: Combining_Diacritical_Marks_Extended} (Short: \p{Blk= DiacriticalsExt}) (80: U+1AB0..1AFF) \p{Block: Combining_Diacritical_Marks_For_Symbols} (Short: \p{Blk= DiacriticalsForSymbols}) (48: U+20D0..20FF) \p{Block: Combining_Diacritical_Marks_Supplement} (Short: \p{Blk= DiacriticalsSup}) (64: U+1DC0..1DFF) \p{Block: Combining_Half_Marks} (Short: \p{Blk=HalfMarks}) (16: U+FE20..FE2F) \p{Block: Combining_Marks_For_Symbols} \p{Block= Combining_Diacritical_Marks_For_Symbols} (48) \p{Block: Common_Indic_Number_Forms} (Short: \p{Blk= IndicNumberForms}) (16: U+A830..A83F) \p{Block: Compat_Jamo} \p{Block=Hangul_Compatibility_Jamo} (96) \p{Block: Control_Pictures} (64: U+2400..243F) \p{Block: Coptic} (NOT \p{Coptic} NOR \p{Is_Coptic}) (128: U+2C80..2CFF) \p{Block: Coptic_Epact_Numbers} (32: U+102E0..102FF) \p{Block: Counting_Rod} \p{Block=Counting_Rod_Numerals} (32) \p{Block: Counting_Rod_Numerals} (Short: \p{Blk=CountingRod}) (32: U+1D360..1D37F) \p{Block: Cuneiform} (NOT \p{Cuneiform} NOR \p{Is_Cuneiform}) (1024: U+12000..123FF) \p{Block: Cuneiform_Numbers} \p{Block= Cuneiform_Numbers_And_Punctuation} (128) \p{Block: Cuneiform_Numbers_And_Punctuation} (Short: \p{Blk= CuneiformNumbers}) (128: U+12400..1247F) \p{Block: Currency_Symbols} (48: U+20A0..20CF) \p{Block: Cypriot_Syllabary} (64: U+10800..1083F) \p{Block: Cyrillic} (NOT \p{Cyrillic} NOR \p{Is_Cyrillic}) (256: U+0400..04FF) \p{Block: Cyrillic_Ext_A} \p{Block=Cyrillic_Extended_A} (32) \p{Block: Cyrillic_Ext_B} \p{Block=Cyrillic_Extended_B} (96) \p{Block: Cyrillic_Ext_C} \p{Block=Cyrillic_Extended_C} (16) \p{Block: Cyrillic_Extended_A} (Short: \p{Blk=CyrillicExtA}) (32: U+2DE0..2DFF) \p{Block: Cyrillic_Extended_B} (Short: \p{Blk=CyrillicExtB}) (96: U+A640..A69F) \p{Block: Cyrillic_Extended_C} (Short: \p{Blk=CyrillicExtC}) (16: U+1C80..1C8F) \p{Block: Cyrillic_Sup} \p{Block=Cyrillic_Supplement} (48) \p{Block: Cyrillic_Supplement} (Short: \p{Blk=CyrillicSup}) (48: U+0500..052F) \p{Block: Cyrillic_Supplementary} \p{Block=Cyrillic_Supplement} (48) \p{Block: Deseret} (80: U+10400..1044F) \p{Block: Devanagari} (NOT \p{Devanagari} NOR \p{Is_Devanagari}) (128: U+0900..097F) \p{Block: Devanagari_Ext} \p{Block=Devanagari_Extended} (32) \p{Block: Devanagari_Extended} (Short: \p{Blk=DevanagariExt}) (32: U+A8E0..A8FF) \p{Block: Diacriticals} \p{Block=Combining_Diacritical_Marks} (112) \p{Block: Diacriticals_Ext} \p{Block= Combining_Diacritical_Marks_Extended} (80) \p{Block: Diacriticals_For_Symbols} \p{Block= Combining_Diacritical_Marks_For_Symbols} (48) \p{Block: Diacriticals_Sup} \p{Block= Combining_Diacritical_Marks_Supplement} (64) \p{Block: Dingbats} (192: U+2700..27BF) \p{Block: Dives_Akuru} (NOT \p{Dives_Akuru} NOR \p{Is_Dives_Akuru}) (96: U+11900..1195F) \p{Block: Dogra} (NOT \p{Dogra} NOR \p{Is_Dogra}) (80: U+11800..1184F) \p{Block: Domino} \p{Block=Domino_Tiles} (112) \p{Block: Domino_Tiles} (Short: \p{Blk=Domino}) (112: U+1F030..1F09F) \p{Block: Duployan} (NOT \p{Duployan} NOR \p{Is_Duployan}) (160: U+1BC00..1BC9F) \p{Block: Early_Dynastic_Cuneiform} (208: U+12480..1254F) \p{Block: Egyptian_Hieroglyph_Format_Controls} (16: U+13430..1343F) \p{Block: Egyptian_Hieroglyphs} (NOT \p{Egyptian_Hieroglyphs} NOR \p{Is_Egyptian_Hieroglyphs}) (1072: U+13000..1342F) \p{Block: Elbasan} (NOT \p{Elbasan} NOR \p{Is_Elbasan}) (48: U+10500..1052F) \p{Block: Elymaic} (NOT \p{Elymaic} NOR \p{Is_Elymaic}) (32: U+10FE0..10FFF) \p{Block: Emoticons} (80: U+1F600..1F64F) \p{Block: Enclosed_Alphanum} \p{Block=Enclosed_Alphanumerics} (160) \p{Block: Enclosed_Alphanum_Sup} \p{Block= Enclosed_Alphanumeric_Supplement} (256) \p{Block: Enclosed_Alphanumeric_Supplement} (Short: \p{Blk= EnclosedAlphanumSup}) (256: U+1F100..1F1FF) \p{Block: Enclosed_Alphanumerics} (Short: \p{Blk= EnclosedAlphanum}) (160: U+2460..24FF) \p{Block: Enclosed_CJK} \p{Block=Enclosed_CJK_Letters_And_Months} (256) \p{Block: Enclosed_CJK_Letters_And_Months} (Short: \p{Blk= EnclosedCJK}) (256: U+3200..32FF) \p{Block: Enclosed_Ideographic_Sup} \p{Block= Enclosed_Ideographic_Supplement} (256) \p{Block: Enclosed_Ideographic_Supplement} (Short: \p{Blk= EnclosedIdeographicSup}) (256: U+1F200..1F2FF) \p{Block: Ethiopic} (NOT \p{Ethiopic} NOR \p{Is_Ethiopic}) (384: U+1200..137F) \p{Block: Ethiopic_Ext} \p{Block=Ethiopic_Extended} (96) \p{Block: Ethiopic_Ext_A} \p{Block=Ethiopic_Extended_A} (48) \p{Block: Ethiopic_Extended} (Short: \p{Blk=EthiopicExt}) (96: U+2D80..2DDF) \p{Block: Ethiopic_Extended_A} (Short: \p{Blk=EthiopicExtA}) (48: U+AB00..AB2F) \p{Block: Ethiopic_Sup} \p{Block=Ethiopic_Supplement} (32) \p{Block: Ethiopic_Supplement} (Short: \p{Blk=EthiopicSup}) (32: U+1380..139F) \p{Block: General_Punctuation} (Short: \p{Blk=Punctuation}; NOT \p{Punct} NOR \p{Is_Punctuation}) (112: U+2000..206F) \p{Block: Geometric_Shapes} (96: U+25A0..25FF) \p{Block: Geometric_Shapes_Ext} \p{Block= Geometric_Shapes_Extended} (128) \p{Block: Geometric_Shapes_Extended} (Short: \p{Blk= GeometricShapesExt}) (128: U+1F780..1F7FF) \p{Block: Georgian} (NOT \p{Georgian} NOR \p{Is_Georgian}) (96: U+10A0..10FF) \p{Block: Georgian_Ext} \p{Block=Georgian_Extended} (48) \p{Block: Georgian_Extended} (Short: \p{Blk=GeorgianExt}) (48: U+1C90..1CBF) \p{Block: Georgian_Sup} \p{Block=Georgian_Supplement} (48) \p{Block: Georgian_Supplement} (Short: \p{Blk=GeorgianSup}) (48: U+2D00..2D2F) \p{Block: Glagolitic} (NOT \p{Glagolitic} NOR \p{Is_Glagolitic}) (96: U+2C00..2C5F) \p{Block: Glagolitic_Sup} \p{Block=Glagolitic_Supplement} (48) \p{Block: Glagolitic_Supplement} (Short: \p{Blk=GlagoliticSup}) (48: U+1E000..1E02F) \p{Block: Gothic} (NOT \p{Gothic} NOR \p{Is_Gothic}) (32: U+10330..1034F) \p{Block: Grantha} (NOT \p{Grantha} NOR \p{Is_Grantha}) (128: U+11300..1137F) \p{Block: Greek} \p{Block=Greek_And_Coptic} (NOT \p{Greek} NOR \p{Is_Greek}) (144) \p{Block: Greek_And_Coptic} (Short: \p{Blk=Greek}; NOT \p{Greek} NOR \p{Is_Greek}) (144: U+0370..03FF) \p{Block: Greek_Ext} \p{Block=Greek_Extended} (256) \p{Block: Greek_Extended} (Short: \p{Blk=GreekExt}) (256: U+1F00..1FFF) \p{Block: Gujarati} (NOT \p{Gujarati} NOR \p{Is_Gujarati}) (128: U+0A80..0AFF) \p{Block: Gunjala_Gondi} (NOT \p{Gunjala_Gondi} NOR \p{Is_Gunjala_Gondi}) (80: U+11D60..11DAF) \p{Block: Gurmukhi} (NOT \p{Gurmukhi} NOR \p{Is_Gurmukhi}) (128: U+0A00..0A7F) \p{Block: Half_And_Full_Forms} \p{Block= Halfwidth_And_Fullwidth_Forms} (240) \p{Block: Half_Marks} \p{Block=Combining_Half_Marks} (16) \p{Block: Halfwidth_And_Fullwidth_Forms} (Short: \p{Blk= HalfAndFullForms}) (240: U+FF00..FFEF) \p{Block: Hangul} \p{Block=Hangul_Syllables} (NOT \p{Hangul} NOR \p{Is_Hangul}) (11_184) \p{Block: Hangul_Compatibility_Jamo} (Short: \p{Blk=CompatJamo}) (96: U+3130..318F) \p{Block: Hangul_Jamo} (Short: \p{Blk=Jamo}) (256: U+1100..11FF) \p{Block: Hangul_Jamo_Extended_A} (Short: \p{Blk=JamoExtA}) (32: U+A960..A97F) \p{Block: Hangul_Jamo_Extended_B} (Short: \p{Blk=JamoExtB}) (80: U+D7B0..D7FF) \p{Block: Hangul_Syllables} (Short: \p{Blk=Hangul}; NOT \p{Hangul} NOR \p{Is_Hangul}) (11_184: U+AC00..D7AF) \p{Block: Hanifi_Rohingya} (NOT \p{Hanifi_Rohingya} NOR \p{Is_Hanifi_Rohingya}) (64: U+10D00..10D3F) \p{Block: Hanunoo} (NOT \p{Hanunoo} NOR \p{Is_Hanunoo}) (32: U+1720..173F) \p{Block: Hatran} (NOT \p{Hatran} NOR \p{Is_Hatran}) (32: U+108E0..108FF) \p{Block: Hebrew} (NOT \p{Hebrew} NOR \p{Is_Hebrew}) (112: U+0590..05FF) \p{Block: High_Private_Use_Surrogates} (Short: \p{Blk= HighPUSurrogates}) (128: U+DB80..DBFF) \p{Block: High_PU_Surrogates} \p{Block= High_Private_Use_Surrogates} (128) \p{Block: High_Surrogates} (896: U+D800..DB7F) \p{Block: Hiragana} (NOT \p{Hiragana} NOR \p{Is_Hiragana}) (96: U+3040..309F) \p{Block: IDC} \p{Block= Ideographic_Description_Characters} (NOT \p{ID_Continue} NOR \p{Is_IDC}) (16) \p{Block: Ideographic_Description_Characters} (Short: \p{Blk=IDC}; NOT \p{ID_Continue} NOR \p{Is_IDC}) (16: U+2FF0..2FFF) \p{Block: Ideographic_Symbols} \p{Block= Ideographic_Symbols_And_Punctuation} (32) \p{Block: Ideographic_Symbols_And_Punctuation} (Short: \p{Blk= IdeographicSymbols}) (32: U+16FE0..16FFF) \p{Block: Imperial_Aramaic} (NOT \p{Imperial_Aramaic} NOR \p{Is_Imperial_Aramaic}) (32: U+10840..1085F) \p{Block: Indic_Number_Forms} \p{Block=Common_Indic_Number_Forms} (16) \p{Block: Indic_Siyaq_Numbers} (80: U+1EC70..1ECBF) \p{Block: Inscriptional_Pahlavi} (NOT \p{Inscriptional_Pahlavi} NOR \p{Is_Inscriptional_Pahlavi}) (32: U+10B60..10B7F) \p{Block: Inscriptional_Parthian} (NOT \p{Inscriptional_Parthian} NOR \p{Is_Inscriptional_Parthian}) (32: U+10B40..10B5F) \p{Block: IPA_Ext} \p{Block=IPA_Extensions} (96) \p{Block: IPA_Extensions} (Short: \p{Blk=IPAExt}) (96: U+0250..02AF) \p{Block: Jamo} \p{Block=Hangul_Jamo} (256) \p{Block: Jamo_Ext_A} \p{Block=Hangul_Jamo_Extended_A} (32) \p{Block: Jamo_Ext_B} \p{Block=Hangul_Jamo_Extended_B} (80) \p{Block: Javanese} (NOT \p{Javanese} NOR \p{Is_Javanese}) (96: U+A980..A9DF) \p{Block: Kaithi} (NOT \p{Kaithi} NOR \p{Is_Kaithi}) (80: U+11080..110CF) \p{Block: Kana_Ext_A} \p{Block=Kana_Extended_A} (48) \p{Block: Kana_Extended_A} (Short: \p{Blk=KanaExtA}) (48: U+1B100..1B12F) \p{Block: Kana_Sup} \p{Block=Kana_Supplement} (256) \p{Block: Kana_Supplement} (Short: \p{Blk=KanaSup}) (256: U+1B000..1B0FF) \p{Block: Kanbun} (16: U+3190..319F) \p{Block: Kangxi} \p{Block=Kangxi_Radicals} (224) \p{Block: Kangxi_Radicals} (Short: \p{Blk=Kangxi}) (224: U+2F00..2FDF) \p{Block: Kannada} (NOT \p{Kannada} NOR \p{Is_Kannada}) (128: U+0C80..0CFF) \p{Block: Katakana} (NOT \p{Katakana} NOR \p{Is_Katakana}) (96: U+30A0..30FF) \p{Block: Katakana_Ext} \p{Block=Katakana_Phonetic_Extensions} (16) \p{Block: Katakana_Phonetic_Extensions} (Short: \p{Blk= KatakanaExt}) (16: U+31F0..31FF) \p{Block: Kayah_Li} (48: U+A900..A92F) \p{Block: Kharoshthi} (NOT \p{Kharoshthi} NOR \p{Is_Kharoshthi}) (96: U+10A00..10A5F) \p{Block: Khitan_Small_Script} (NOT \p{Khitan_Small_Script} NOR \p{Is_Khitan_Small_Script}) (512: U+18B00..18CFF) \p{Block: Khmer} (NOT \p{Khmer} NOR \p{Is_Khmer}) (128: U+1780..17FF) \p{Block: Khmer_Symbols} (32: U+19E0..19FF) \p{Block: Khojki} (NOT \p{Khojki} NOR \p{Is_Khojki}) (80: U+11200..1124F) \p{Block: Khudawadi} (NOT \p{Khudawadi} NOR \p{Is_Khudawadi}) (80: U+112B0..112FF) \p{Block: Lao} (NOT \p{Lao} NOR \p{Is_Lao}) (128: U+0E80..0EFF) \p{Block: Latin_1} \p{Block=Latin_1_Supplement} (128) \p{Block: Latin_1_Sup} \p{Block=Latin_1_Supplement} (128) \p{Block: Latin_1_Supplement} (Short: \p{Blk=Latin1}) (128: [\x80- \xff]) \p{Block: Latin_Ext_A} \p{Block=Latin_Extended_A} (128) \p{Block: Latin_Ext_Additional} \p{Block= Latin_Extended_Additional} (256) \p{Block: Latin_Ext_B} \p{Block=Latin_Extended_B} (208) \p{Block: Latin_Ext_C} \p{Block=Latin_Extended_C} (32) \p{Block: Latin_Ext_D} \p{Block=Latin_Extended_D} (224) \p{Block: Latin_Ext_E} \p{Block=Latin_Extended_E} (64) \p{Block: Latin_Extended_A} (Short: \p{Blk=LatinExtA}) (128: U+0100..017F) \p{Block: Latin_Extended_Additional} (Short: \p{Blk= LatinExtAdditional}) (256: U+1E00..1EFF) \p{Block: Latin_Extended_B} (Short: \p{Blk=LatinExtB}) (208: U+0180..024F) \p{Block: Latin_Extended_C} (Short: \p{Blk=LatinExtC}) (32: U+2C60..2C7F) \p{Block: Latin_Extended_D} (Short: \p{Blk=LatinExtD}) (224: U+A720..A7FF) \p{Block: Latin_Extended_E} (Short: \p{Blk=LatinExtE}) (64: U+AB30..AB6F) \p{Block: Lepcha} (NOT \p{Lepcha} NOR \p{Is_Lepcha}) (80: U+1C00..1C4F) \p{Block: Letterlike_Symbols} (80: U+2100..214F) \p{Block: Limbu} (NOT \p{Limbu} NOR \p{Is_Limbu}) (80: U+1900..194F) \p{Block: Linear_A} (NOT \p{Linear_A} NOR \p{Is_Linear_A}) (384: U+10600..1077F) \p{Block: Linear_B_Ideograms} (128: U+10080..100FF) \p{Block: Linear_B_Syllabary} (128: U+10000..1007F) \p{Block: Lisu} (NOT \p{Lisu} NOR \p{Is_Lisu}) (48: U+A4D0..A4FF) \p{Block: Lisu_Sup} \p{Block=Lisu_Supplement} (16) \p{Block: Lisu_Supplement} (Short: \p{Blk=LisuSup}) (16: U+11FB0..11FBF) \p{Block: Low_Surrogates} (1024: U+DC00..DFFF) \p{Block: Lycian} (NOT \p{Lycian} NOR \p{Is_Lycian}) (32: U+10280..1029F) \p{Block: Lydian} (NOT \p{Lydian} NOR \p{Is_Lydian}) (32: U+10920..1093F) \p{Block: Mahajani} (NOT \p{Mahajani} NOR \p{Is_Mahajani}) (48: U+11150..1117F) \p{Block: Mahjong} \p{Block=Mahjong_Tiles} (48) \p{Block: Mahjong_Tiles} (Short: \p{Blk=Mahjong}) (48: U+1F000..1F02F) \p{Block: Makasar} (NOT \p{Makasar} NOR \p{Is_Makasar}) (32: U+11EE0..11EFF) \p{Block: Malayalam} (NOT \p{Malayalam} NOR \p{Is_Malayalam}) (128: U+0D00..0D7F) \p{Block: Mandaic} (NOT \p{Mandaic} NOR \p{Is_Mandaic}) (32: U+0840..085F) \p{Block: Manichaean} (NOT \p{Manichaean} NOR \p{Is_Manichaean}) (64: U+10AC0..10AFF) \p{Block: Marchen} (NOT \p{Marchen} NOR \p{Is_Marchen}) (80: U+11C70..11CBF) \p{Block: Masaram_Gondi} (NOT \p{Masaram_Gondi} NOR \p{Is_Masaram_Gondi}) (96: U+11D00..11D5F) \p{Block: Math_Alphanum} \p{Block= Mathematical_Alphanumeric_Symbols} (1024) \p{Block: Math_Operators} \p{Block=Mathematical_Operators} (256) \p{Block: Mathematical_Alphanumeric_Symbols} (Short: \p{Blk= MathAlphanum}) (1024: U+1D400..1D7FF) \p{Block: Mathematical_Operators} (Short: \p{Blk=MathOperators}) (256: U+2200..22FF) \p{Block: Mayan_Numerals} (32: U+1D2E0..1D2FF) \p{Block: Medefaidrin} (NOT \p{Medefaidrin} NOR \p{Is_Medefaidrin}) (96: U+16E40..16E9F) \p{Block: Meetei_Mayek} (NOT \p{Meetei_Mayek} NOR \p{Is_Meetei_Mayek}) (64: U+ABC0..ABFF) \p{Block: Meetei_Mayek_Ext} \p{Block=Meetei_Mayek_Extensions} (32) \p{Block: Meetei_Mayek_Extensions} (Short: \p{Blk=MeeteiMayekExt}) (32: U+AAE0..AAFF) \p{Block: Mende_Kikakui} (NOT \p{Mende_Kikakui} NOR \p{Is_Mende_Kikakui}) (224: U+1E800..1E8DF) \p{Block: Meroitic_Cursive} (NOT \p{Meroitic_Cursive} NOR \p{Is_Meroitic_Cursive}) (96: U+109A0..109FF) \p{Block: Meroitic_Hieroglyphs} (32: U+10980..1099F) \p{Block: Miao} (NOT \p{Miao} NOR \p{Is_Miao}) (160: U+16F00..16F9F) \p{Block: Misc_Arrows} \p{Block=Miscellaneous_Symbols_And_Arrows} (256) \p{Block: Misc_Math_Symbols_A} \p{Block= Miscellaneous_Mathematical_Symbols_A} (48) \p{Block: Misc_Math_Symbols_B} \p{Block= Miscellaneous_Mathematical_Symbols_B} (128) \p{Block: Misc_Pictographs} \p{Block= Miscellaneous_Symbols_And_Pictographs} (768) \p{Block: Misc_Symbols} \p{Block=Miscellaneous_Symbols} (256) \p{Block: Misc_Technical} \p{Block=Miscellaneous_Technical} (256) \p{Block: Miscellaneous_Mathematical_Symbols_A} (Short: \p{Blk= MiscMathSymbolsA}) (48: U+27C0..27EF) \p{Block: Miscellaneous_Mathematical_Symbols_B} (Short: \p{Blk= MiscMathSymbolsB}) (128: U+2980..29FF) \p{Block: Miscellaneous_Symbols} (Short: \p{Blk=MiscSymbols}) (256: U+2600..26FF) \p{Block: Miscellaneous_Symbols_And_Arrows} (Short: \p{Blk= MiscArrows}) (256: U+2B00..2BFF) \p{Block: Miscellaneous_Symbols_And_Pictographs} (Short: \p{Blk= MiscPictographs}) (768: U+1F300..1F5FF) \p{Block: Miscellaneous_Technical} (Short: \p{Blk=MiscTechnical}) (256: U+2300..23FF) \p{Block: Modi} (NOT \p{Modi} NOR \p{Is_Modi}) (96: U+11600..1165F) \p{Block: Modifier_Letters} \p{Block=Spacing_Modifier_Letters} (80) \p{Block: Modifier_Tone_Letters} (32: U+A700..A71F) \p{Block: Mongolian} (NOT \p{Mongolian} NOR \p{Is_Mongolian}) (176: U+1800..18AF) \p{Block: Mongolian_Sup} \p{Block=Mongolian_Supplement} (32) \p{Block: Mongolian_Supplement} (Short: \p{Blk=MongolianSup}) (32: U+11660..1167F) \p{Block: Mro} (NOT \p{Mro} NOR \p{Is_Mro}) (48: U+16A40..16A6F) \p{Block: Multani} (NOT \p{Multani} NOR \p{Is_Multani}) (48: U+11280..112AF) \p{Block: Music} \p{Block=Musical_Symbols} (256) \p{Block: Musical_Symbols} (Short: \p{Blk=Music}) (256: U+1D100..1D1FF) \p{Block: Myanmar} (NOT \p{Myanmar} NOR \p{Is_Myanmar}) (160: U+1000..109F) \p{Block: Myanmar_Ext_A} \p{Block=Myanmar_Extended_A} (32) \p{Block: Myanmar_Ext_B} \p{Block=Myanmar_Extended_B} (32) \p{Block: Myanmar_Extended_A} (Short: \p{Blk=MyanmarExtA}) (32: U+AA60..AA7F) \p{Block: Myanmar_Extended_B} (Short: \p{Blk=MyanmarExtB}) (32: U+A9E0..A9FF) \p{Block: Nabataean} (NOT \p{Nabataean} NOR \p{Is_Nabataean}) (48: U+10880..108AF) \p{Block: Nandinagari} (NOT \p{Nandinagari} NOR \p{Is_Nandinagari}) (96: U+119A0..119FF) \p{Block: NB} \p{Block=No_Block} (826_640 plus all above-Unicode code points) \p{Block: New_Tai_Lue} (NOT \p{New_Tai_Lue} NOR \p{Is_New_Tai_Lue}) (96: U+1980..19DF) \p{Block: Newa} (NOT \p{Newa} NOR \p{Is_Newa}) (128: U+11400..1147F) \p{Block: NKo} (NOT \p{Nko} NOR \p{Is_NKo}) (64: U+07C0..07FF) \p{Block: No_Block} (Short: \p{Blk=NB}) (826_640 plus all above-Unicode code points: U+0870..089F, U+2FE0..2FEF, U+10200..1027F, U+103E0..103FF, U+10570..105FF, U+10780..107FF ...) \p{Block: Number_Forms} (64: U+2150..218F) \p{Block: Nushu} (NOT \p{Nushu} NOR \p{Is_Nushu}) (400: U+1B170..1B2FF) \p{Block: Nyiakeng_Puachue_Hmong} (NOT \p{Nyiakeng_Puachue_Hmong} NOR \p{Is_Nyiakeng_Puachue_Hmong}) (80: U+1E100..1E14F) \p{Block: OCR} \p{Block=Optical_Character_Recognition} (32) \p{Block: Ogham} (NOT \p{Ogham} NOR \p{Is_Ogham}) (32: U+1680..169F) \p{Block: Ol_Chiki} (48: U+1C50..1C7F) \p{Block: Old_Hungarian} (NOT \p{Old_Hungarian} NOR \p{Is_Old_Hungarian}) (128: U+10C80..10CFF) \p{Block: Old_Italic} (NOT \p{Old_Italic} NOR \p{Is_Old_Italic}) (48: U+10300..1032F) \p{Block: Old_North_Arabian} (32: U+10A80..10A9F) \p{Block: Old_Permic} (NOT \p{Old_Permic} NOR \p{Is_Old_Permic}) (48: U+10350..1037F) \p{Block: Old_Persian} (NOT \p{Old_Persian} NOR \p{Is_Old_Persian}) (64: U+103A0..103DF) \p{Block: Old_Sogdian} (NOT \p{Old_Sogdian} NOR \p{Is_Old_Sogdian}) (48: U+10F00..10F2F) \p{Block: Old_South_Arabian} (32: U+10A60..10A7F) \p{Block: Old_Turkic} (NOT \p{Old_Turkic} NOR \p{Is_Old_Turkic}) (80: U+10C00..10C4F) \p{Block: Optical_Character_Recognition} (Short: \p{Blk=OCR}) (32: U+2440..245F) \p{Block: Oriya} (NOT \p{Oriya} NOR \p{Is_Oriya}) (128: U+0B00..0B7F) \p{Block: Ornamental_Dingbats} (48: U+1F650..1F67F) \p{Block: Osage} (NOT \p{Osage} NOR \p{Is_Osage}) (80: U+104B0..104FF) \p{Block: Osmanya} (NOT \p{Osmanya} NOR \p{Is_Osmanya}) (48: U+10480..104AF) \p{Block: Ottoman_Siyaq_Numbers} (80: U+1ED00..1ED4F) \p{Block: Pahawh_Hmong} (NOT \p{Pahawh_Hmong} NOR \p{Is_Pahawh_Hmong}) (144: U+16B00..16B8F) \p{Block: Palmyrene} (32: U+10860..1087F) \p{Block: Pau_Cin_Hau} (NOT \p{Pau_Cin_Hau} NOR \p{Is_Pau_Cin_Hau}) (64: U+11AC0..11AFF) \p{Block: Phags_Pa} (NOT \p{Phags_Pa} NOR \p{Is_Phags_Pa}) (64: U+A840..A87F) \p{Block: Phaistos} \p{Block=Phaistos_Disc} (48) \p{Block: Phaistos_Disc} (Short: \p{Blk=Phaistos}) (48: U+101D0..101FF) \p{Block: Phoenician} (NOT \p{Phoenician} NOR \p{Is_Phoenician}) (32: U+10900..1091F) \p{Block: Phonetic_Ext} \p{Block=Phonetic_Extensions} (128) \p{Block: Phonetic_Ext_Sup} \p{Block= Phonetic_Extensions_Supplement} (64) \p{Block: Phonetic_Extensions} (Short: \p{Blk=PhoneticExt}) (128: U+1D00..1D7F) \p{Block: Phonetic_Extensions_Supplement} (Short: \p{Blk= PhoneticExtSup}) (64: U+1D80..1DBF) \p{Block: Playing_Cards} (96: U+1F0A0..1F0FF) \p{Block: Private_Use} \p{Block=Private_Use_Area} (NOT \p{Private_Use} NOR \p{Is_Private_Use}) (6400) \p{Block: Private_Use_Area} (Short: \p{Blk=PUA}; NOT \p{Private_Use} NOR \p{Is_Private_Use}) (6400: U+E000..F8FF) \p{Block: Psalter_Pahlavi} (NOT \p{Psalter_Pahlavi} NOR \p{Is_Psalter_Pahlavi}) (48: U+10B80..10BAF) \p{Block: PUA} \p{Block=Private_Use_Area} (NOT \p{Private_Use} NOR \p{Is_Private_Use}) (6400) \p{Block: Punctuation} \p{Block=General_Punctuation} (NOT \p{Punct} NOR \p{Is_Punctuation}) (112) \p{Block: Rejang} (NOT \p{Rejang} NOR \p{Is_Rejang}) (48: U+A930..A95F) \p{Block: Rumi} \p{Block=Rumi_Numeral_Symbols} (32) \p{Block: Rumi_Numeral_Symbols} (Short: \p{Blk=Rumi}) (32: U+10E60..10E7F) \p{Block: Runic} (NOT \p{Runic} NOR \p{Is_Runic}) (96: U+16A0..16FF) \p{Block: Samaritan} (NOT \p{Samaritan} NOR \p{Is_Samaritan}) (64: U+0800..083F) \p{Block: Saurashtra} (NOT \p{Saurashtra} NOR \p{Is_Saurashtra}) (96: U+A880..A8DF) \p{Block: Sharada} (NOT \p{Sharada} NOR \p{Is_Sharada}) (96: U+11180..111DF) \p{Block: Shavian} (48: U+10450..1047F) \p{Block: Shorthand_Format_Controls} (16: U+1BCA0..1BCAF) \p{Block: Siddham} (NOT \p{Siddham} NOR \p{Is_Siddham}) (128: U+11580..115FF) \p{Block: Sinhala} (NOT \p{Sinhala} NOR \p{Is_Sinhala}) (128: U+0D80..0DFF) \p{Block: Sinhala_Archaic_Numbers} (32: U+111E0..111FF) \p{Block: Small_Form_Variants} (Short: \p{Blk=SmallForms}) (32: U+FE50..FE6F) \p{Block: Small_Forms} \p{Block=Small_Form_Variants} (32) \p{Block: Small_Kana_Ext} \p{Block=Small_Kana_Extension} (64) \p{Block: Small_Kana_Extension} (Short: \p{Blk=SmallKanaExt}) (64: U+1B130..1B16F) \p{Block: Sogdian} (NOT \p{Sogdian} NOR \p{Is_Sogdian}) (64: U+10F30..10F6F) \p{Block: Sora_Sompeng} (NOT \p{Sora_Sompeng} NOR \p{Is_Sora_Sompeng}) (48: U+110D0..110FF) \p{Block: Soyombo} (NOT \p{Soyombo} NOR \p{Is_Soyombo}) (96: U+11A50..11AAF) \p{Block: Spacing_Modifier_Letters} (Short: \p{Blk= ModifierLetters}) (80: U+02B0..02FF) \p{Block: Specials} (16: U+FFF0..FFFF) \p{Block: Sundanese} (NOT \p{Sundanese} NOR \p{Is_Sundanese}) (64: U+1B80..1BBF) \p{Block: Sundanese_Sup} \p{Block=Sundanese_Supplement} (16) \p{Block: Sundanese_Supplement} (Short: \p{Blk=SundaneseSup}) (16: U+1CC0..1CCF) \p{Block: Sup_Arrows_A} \p{Block=Supplemental_Arrows_A} (16) \p{Block: Sup_Arrows_B} \p{Block=Supplemental_Arrows_B} (128) \p{Block: Sup_Arrows_C} \p{Block=Supplemental_Arrows_C} (256) \p{Block: Sup_Math_Operators} \p{Block= Supplemental_Mathematical_Operators} (256) \p{Block: Sup_PUA_A} \p{Block=Supplementary_Private_Use_Area_A} (65_536) \p{Block: Sup_PUA_B} \p{Block=Supplementary_Private_Use_Area_B} (65_536) \p{Block: Sup_Punctuation} \p{Block=Supplemental_Punctuation} (128) \p{Block: Sup_Symbols_And_Pictographs} \p{Block= Supplemental_Symbols_And_Pictographs} (256) \p{Block: Super_And_Sub} \p{Block=Superscripts_And_Subscripts} (48) \p{Block: Superscripts_And_Subscripts} (Short: \p{Blk= SuperAndSub}) (48: U+2070..209F) \p{Block: Supplemental_Arrows_A} (Short: \p{Blk=SupArrowsA}) (16: U+27F0..27FF) \p{Block: Supplemental_Arrows_B} (Short: \p{Blk=SupArrowsB}) (128: U+2900..297F) \p{Block: Supplemental_Arrows_C} (Short: \p{Blk=SupArrowsC}) (256: U+1F800..1F8FF) \p{Block: Supplemental_Mathematical_Operators} (Short: \p{Blk= SupMathOperators}) (256: U+2A00..2AFF) \p{Block: Supplemental_Punctuation} (Short: \p{Blk= SupPunctuation}) (128: U+2E00..2E7F) \p{Block: Supplemental_Symbols_And_Pictographs} (Short: \p{Blk= SupSymbolsAndPictographs}) (256: U+1F900..1F9FF) \p{Block: Supplementary_Private_Use_Area_A} (Short: \p{Blk= SupPUAA}) (65_536: U+F0000..FFFFF) \p{Block: Supplementary_Private_Use_Area_B} (Short: \p{Blk= SupPUAB}) (65_536: U+100000..10FFFF) \p{Block: Sutton_SignWriting} (688: U+1D800..1DAAF) \p{Block: Syloti_Nagri} (NOT \p{Syloti_Nagri} NOR \p{Is_Syloti_Nagri}) (48: U+A800..A82F) \p{Block: Symbols_And_Pictographs_Ext_A} \p{Block= Symbols_And_Pictographs_Extended_A} (144) \p{Block: Symbols_And_Pictographs_Extended_A} (Short: \p{Blk= SymbolsAndPictographsExtA}) (144: U+1FA70..1FAFF) \p{Block: Symbols_For_Legacy_Computing} (256: U+1FB00..1FBFF) \p{Block: Syriac} (NOT \p{Syriac} NOR \p{Is_Syriac}) (80: U+0700..074F) \p{Block: Syriac_Sup} \p{Block=Syriac_Supplement} (16) \p{Block: Syriac_Supplement} (Short: \p{Blk=SyriacSup}) (16: U+0860..086F) \p{Block: Tagalog} (NOT \p{Tagalog} NOR \p{Is_Tagalog}) (32: U+1700..171F) \p{Block: Tagbanwa} (NOT \p{Tagbanwa} NOR \p{Is_Tagbanwa}) (32: U+1760..177F) \p{Block: Tags} (128: U+E0000..E007F) \p{Block: Tai_Le} (NOT \p{Tai_Le} NOR \p{Is_Tai_Le}) (48: U+1950..197F) \p{Block: Tai_Tham} (NOT \p{Tai_Tham} NOR \p{Is_Tai_Tham}) (144: U+1A20..1AAF) \p{Block: Tai_Viet} (NOT \p{Tai_Viet} NOR \p{Is_Tai_Viet}) (96: U+AA80..AADF) \p{Block: Tai_Xuan_Jing} \p{Block=Tai_Xuan_Jing_Symbols} (96) \p{Block: Tai_Xuan_Jing_Symbols} (Short: \p{Blk=TaiXuanJing}) (96: U+1D300..1D35F) \p{Block: Takri} (NOT \p{Takri} NOR \p{Is_Takri}) (80: U+11680..116CF) \p{Block: Tamil} (NOT \p{Tamil} NOR \p{Is_Tamil}) (128: U+0B80..0BFF) \p{Block: Tamil_Sup} \p{Block=Tamil_Supplement} (64) \p{Block: Tamil_Supplement} (Short: \p{Blk=TamilSup}) (64: U+11FC0..11FFF) \p{Block: Tangut} (NOT \p{Tangut} NOR \p{Is_Tangut}) (6144: U+17000..187FF) \p{Block: Tangut_Components} (768: U+18800..18AFF) \p{Block: Tangut_Sup} \p{Block=Tangut_Supplement} (144) \p{Block: Tangut_Supplement} (Short: \p{Blk=TangutSup}) (144: U+18D00..18D8F) \p{Block: Telugu} (NOT \p{Telugu} NOR \p{Is_Telugu}) (128: U+0C00..0C7F) \p{Block: Thaana} (NOT \p{Thaana} NOR \p{Is_Thaana}) (64: U+0780..07BF) \p{Block: Thai} (NOT \p{Thai} NOR \p{Is_Thai}) (128: U+0E00..0E7F) \p{Block: Tibetan} (NOT \p{Tibetan} NOR \p{Is_Tibetan}) (256: U+0F00..0FFF) \p{Block: Tifinagh} (NOT \p{Tifinagh} NOR \p{Is_Tifinagh}) (80: U+2D30..2D7F) \p{Block: Tirhuta} (NOT \p{Tirhuta} NOR \p{Is_Tirhuta}) (96: U+11480..114DF) \p{Block: Transport_And_Map} \p{Block=Transport_And_Map_Symbols} (128) \p{Block: Transport_And_Map_Symbols} (Short: \p{Blk= TransportAndMap}) (128: U+1F680..1F6FF) \p{Block: UCAS} \p{Block= Unified_Canadian_Aboriginal_Syllabics} (640) \p{Block: UCAS_Ext} \p{Block= Unified_Canadian_Aboriginal_Syllabics_- Extended} (80) \p{Block: Ugaritic} (NOT \p{Ugaritic} NOR \p{Is_Ugaritic}) (32: U+10380..1039F) \p{Block: Unified_Canadian_Aboriginal_Syllabics} (Short: \p{Blk= UCAS}) (640: U+1400..167F) \p{Block: Unified_Canadian_Aboriginal_Syllabics_Extended} (Short: \p{Blk=UCASExt}) (80: U+18B0..18FF) \p{Block: Vai} (NOT \p{Vai} NOR \p{Is_Vai}) (320: U+A500..A63F) \p{Block: Variation_Selectors} (Short: \p{Blk=VS}; NOT \p{Variation_Selector} NOR \p{Is_VS}) (16: U+FE00..FE0F) \p{Block: Variation_Selectors_Supplement} (Short: \p{Blk=VSSup}) (240: U+E0100..E01EF) \p{Block: Vedic_Ext} \p{Block=Vedic_Extensions} (48) \p{Block: Vedic_Extensions} (Short: \p{Blk=VedicExt}) (48: U+1CD0..1CFF) \p{Block: Vertical_Forms} (16: U+FE10..FE1F) \p{Block: VS} \p{Block=Variation_Selectors} (NOT \p{Variation_Selector} NOR \p{Is_VS}) (16) \p{Block: VS_Sup} \p{Block=Variation_Selectors_Supplement} (240) \p{Block: Wancho} (NOT \p{Wancho} NOR \p{Is_Wancho}) (64: U+1E2C0..1E2FF) \p{Block: Warang_Citi} (NOT \p{Warang_Citi} NOR \p{Is_Warang_Citi}) (96: U+118A0..118FF) \p{Block: Yezidi} (NOT \p{Yezidi} NOR \p{Is_Yezidi}) (64: U+10E80..10EBF) \p{Block: Yi_Radicals} (64: U+A490..A4CF) \p{Block: Yi_Syllables} (1168: U+A000..A48F) \p{Block: Yijing} \p{Block=Yijing_Hexagram_Symbols} (64) \p{Block: Yijing_Hexagram_Symbols} (Short: \p{Blk=Yijing}) (64: U+4DC0..4DFF) \p{Block: Zanabazar_Square} (NOT \p{Zanabazar_Square} NOR \p{Is_Zanabazar_Square}) (80: U+11A00..11A4F) X \p{Block_Elements} \p{Block=Block_Elements} (32) \p{Bopo} \p{Bopomofo} (= \p{Script_Extensions= Bopomofo}) (NOT \p{Block=Bopomofo}) (117) \p{Bopomofo} \p{Script_Extensions=Bopomofo} (Short: \p{Bopo}; NOT \p{Block=Bopomofo}) (117) X \p{Bopomofo_Ext} \p{Bopomofo_Extended} (= \p{Block= Bopomofo_Extended}) (32) X \p{Bopomofo_Extended} \p{Block=Bopomofo_Extended} (Short: \p{InBopomofoExt}) (32) X \p{Box_Drawing} \p{Block=Box_Drawing} (128) \p{Bpt: *} \p{Bidi_Paired_Bracket_Type: *} \p{Brah} \p{Brahmi} (= \p{Script_Extensions= Brahmi}) (NOT \p{Block=Brahmi}) (109) \p{Brahmi} \p{Script_Extensions=Brahmi} (Short: \p{Brah}; NOT \p{Block=Brahmi}) (109) \p{Brai} \p{Braille} (= \p{Script_Extensions= Braille}) (256) \p{Braille} \p{Script_Extensions=Braille} (Short: \p{Brai}) (256) X \p{Braille_Patterns} \p{Block=Braille_Patterns} (Short: \p{InBraille}) (256) \p{Bugi} \p{Buginese} (= \p{Script_Extensions= Buginese}) (NOT \p{Block=Buginese}) (31) \p{Buginese} \p{Script_Extensions=Buginese} (Short: \p{Bugi}; NOT \p{Block=Buginese}) (31) \p{Buhd} \p{Buhid} (= \p{Script_Extensions=Buhid}) (NOT \p{Block=Buhid}) (22) \p{Buhid} \p{Script_Extensions=Buhid} (Short: \p{Buhd}; NOT \p{Block=Buhid}) (22) X \p{Byzantine_Music} \p{Byzantine_Musical_Symbols} (= \p{Block= Byzantine_Musical_Symbols}) (256) X \p{Byzantine_Musical_Symbols} \p{Block=Byzantine_Musical_Symbols} (Short: \p{InByzantineMusic}) (256) \p{C} \pC \p{Other} (= \p{General_Category=Other}) (970_414 plus all above-Unicode code points) \p{Cakm} \p{Chakma} (= \p{Script_Extensions= Chakma}) (NOT \p{Block=Chakma}) (91) \p{Canadian_Aboriginal} \p{Script_Extensions=Canadian_Aboriginal} (Short: \p{Cans}) (710) X \p{Canadian_Syllabics} \p{Unified_Canadian_Aboriginal_Syllabics} (= \p{Block= Unified_Canadian_Aboriginal_Syllabics}) (640) T \p{Canonical_Combining_Class: 0} \p{Canonical_Combining_Class= Not_Reordered} (1_113_240 plus all above-Unicode code points) T \p{Canonical_Combining_Class: 1} \p{Canonical_Combining_Class= Overlay} (32) T \p{Canonical_Combining_Class: 6} \p{Canonical_Combining_Class= Han_Reading} (2) T \p{Canonical_Combining_Class: 7} \p{Canonical_Combining_Class= Nukta} (26) T \p{Canonical_Combining_Class: 8} \p{Canonical_Combining_Class= Kana_Voicing} (2) T \p{Canonical_Combining_Class: 9} \p{Canonical_Combining_Class= Virama} (61) T \p{Canonical_Combining_Class: 10} \p{Canonical_Combining_Class= CCC10} (1) \p{Canonical_Combining_Class: CCC10} (Short: \p{Ccc=CCC10}) (1: U+05B0) T \p{Canonical_Combining_Class: 11} \p{Canonical_Combining_Class= CCC11} (1) \p{Canonical_Combining_Class: CCC11} (Short: \p{Ccc=CCC11}) (1: U+05B1) T \p{Canonical_Combining_Class: 12} \p{Canonical_Combining_Class= CCC12} (1) \p{Canonical_Combining_Class: CCC12} (Short: \p{Ccc=CCC12}) (1: U+05B2) T \p{Canonical_Combining_Class: 13} \p{Canonical_Combining_Class= CCC13} (1) \p{Canonical_Combining_Class: CCC13} (Short: \p{Ccc=CCC13}) (1: U+05B3) T \p{Canonical_Combining_Class: 14} \p{Canonical_Combining_Class= CCC14} (1) \p{Canonical_Combining_Class: CCC14} (Short: \p{Ccc=CCC14}) (1: U+05B4) T \p{Canonical_Combining_Class: 15} \p{Canonical_Combining_Class= CCC15} (1) \p{Canonical_Combining_Class: CCC15} (Short: \p{Ccc=CCC15}) (1: U+05B5) T \p{Canonical_Combining_Class: 16} \p{Canonical_Combining_Class= CCC16} (1) \p{Canonical_Combining_Class: CCC16} (Short: \p{Ccc=CCC16}) (1: U+05B6) T \p{Canonical_Combining_Class: 17} \p{Canonical_Combining_Class= CCC17} (1) \p{Canonical_Combining_Class: CCC17} (Short: \p{Ccc=CCC17}) (1: U+05B7) T \p{Canonical_Combining_Class: 18} \p{Canonical_Combining_Class= CCC18} (2) \p{Canonical_Combining_Class: CCC18} (Short: \p{Ccc=CCC18}) (2: U+05B8, U+05C7) T \p{Canonical_Combining_Class: 19} \p{Canonical_Combining_Class= CCC19} (2) \p{Canonical_Combining_Class: CCC19} (Short: \p{Ccc=CCC19}) (2: U+05B9..05BA) T \p{Canonical_Combining_Class: 20} \p{Canonical_Combining_Class= CCC20} (1) \p{Canonical_Combining_Class: CCC20} (Short: \p{Ccc=CCC20}) (1: U+05BB) T \p{Canonical_Combining_Class: 21} \p{Canonical_Combining_Class= CCC21} (1) \p{Canonical_Combining_Class: CCC21} (Short: \p{Ccc=CCC21}) (1: U+05BC) T \p{Canonical_Combining_Class: 22} \p{Canonical_Combining_Class= CCC22} (1) \p{Canonical_Combining_Class: CCC22} (Short: \p{Ccc=CCC22}) (1: U+05BD) T \p{Canonical_Combining_Class: 23} \p{Canonical_Combining_Class= CCC23} (1) \p{Canonical_Combining_Class: CCC23} (Short: \p{Ccc=CCC23}) (1: U+05BF) T \p{Canonical_Combining_Class: 24} \p{Canonical_Combining_Class= CCC24} (1) \p{Canonical_Combining_Class: CCC24} (Short: \p{Ccc=CCC24}) (1: U+05C1) T \p{Canonical_Combining_Class: 25} \p{Canonical_Combining_Class= CCC25} (1) \p{Canonical_Combining_Class: CCC25} (Short: \p{Ccc=CCC25}) (1: U+05C2) T \p{Canonical_Combining_Class: 26} \p{Canonical_Combining_Class= CCC26} (1) \p{Canonical_Combining_Class: CCC26} (Short: \p{Ccc=CCC26}) (1: U+FB1E) T \p{Canonical_Combining_Class: 27} \p{Canonical_Combining_Class= CCC27} (2) \p{Canonical_Combining_Class: CCC27} (Short: \p{Ccc=CCC27}) (2: U+064B, U+08F0) T \p{Canonical_Combining_Class: 28} \p{Canonical_Combining_Class= CCC28} (2) \p{Canonical_Combining_Class: CCC28} (Short: \p{Ccc=CCC28}) (2: U+064C, U+08F1) T \p{Canonical_Combining_Class: 29} \p{Canonical_Combining_Class= CCC29} (2) \p{Canonical_Combining_Class: CCC29} (Short: \p{Ccc=CCC29}) (2: U+064D, U+08F2) T \p{Canonical_Combining_Class: 30} \p{Canonical_Combining_Class= CCC30} (2) \p{Canonical_Combining_Class: CCC30} (Short: \p{Ccc=CCC30}) (2: U+0618, U+064E) T \p{Canonical_Combining_Class: 31} \p{Canonical_Combining_Class= CCC31} (2) \p{Canonical_Combining_Class: CCC31} (Short: \p{Ccc=CCC31}) (2: U+0619, U+064F) T \p{Canonical_Combining_Class: 32} \p{Canonical_Combining_Class= CCC32} (2) \p{Canonical_Combining_Class: CCC32} (Short: \p{Ccc=CCC32}) (2: U+061A, U+0650) T \p{Canonical_Combining_Class: 33} \p{Canonical_Combining_Class= CCC33} (1) \p{Canonical_Combining_Class: CCC33} (Short: \p{Ccc=CCC33}) (1: U+0651) T \p{Canonical_Combining_Class: 34} \p{Canonical_Combining_Class= CCC34} (1) \p{Canonical_Combining_Class: CCC34} (Short: \p{Ccc=CCC34}) (1: U+0652) T \p{Canonical_Combining_Class: 35} \p{Canonical_Combining_Class= CCC35} (1) \p{Canonical_Combining_Class: CCC35} (Short: \p{Ccc=CCC35}) (1: U+0670) T \p{Canonical_Combining_Class: 36} \p{Canonical_Combining_Class= CCC36} (1) \p{Canonical_Combining_Class: CCC36} (Short: \p{Ccc=CCC36}) (1: U+0711) T \p{Canonical_Combining_Class: 84} \p{Canonical_Combining_Class= CCC84} (1) \p{Canonical_Combining_Class: CCC84} (Short: \p{Ccc=CCC84}) (1: U+0C55) T \p{Canonical_Combining_Class: 91} \p{Canonical_Combining_Class= CCC91} (1) \p{Canonical_Combining_Class: CCC91} (Short: \p{Ccc=CCC91}) (1: U+0C56) T \p{Canonical_Combining_Class: 103} \p{Canonical_Combining_Class= CCC103} (2) \p{Canonical_Combining_Class: CCC103} (Short: \p{Ccc=CCC103}) (2: U+0E38..0E39) T \p{Canonical_Combining_Class: 107} \p{Canonical_Combining_Class= CCC107} (4) \p{Canonical_Combining_Class: CCC107} (Short: \p{Ccc=CCC107}) (4: U+0E48..0E4B) T \p{Canonical_Combining_Class: 118} \p{Canonical_Combining_Class= CCC118} (2) \p{Canonical_Combining_Class: CCC118} (Short: \p{Ccc=CCC118}) (2: U+0EB8..0EB9) T \p{Canonical_Combining_Class: 122} \p{Canonical_Combining_Class= CCC122} (4) \p{Canonical_Combining_Class: CCC122} (Short: \p{Ccc=CCC122}) (4: U+0EC8..0ECB) T \p{Canonical_Combining_Class: 129} \p{Canonical_Combining_Class= CCC129} (1) \p{Canonical_Combining_Class: CCC129} (Short: \p{Ccc=CCC129}) (1: U+0F71) T \p{Canonical_Combining_Class: 130} \p{Canonical_Combining_Class= CCC130} (6) \p{Canonical_Combining_Class: CCC130} (Short: \p{Ccc=CCC130}) (6: U+0F72, U+0F7A..0F7D, U+0F80) T \p{Canonical_Combining_Class: 132} \p{Canonical_Combining_Class= CCC132} (1) \p{Canonical_Combining_Class: CCC132} (Short: \p{Ccc=CCC132}) (1: U+0F74) T \p{Canonical_Combining_Class: 133} \p{Canonical_Combining_Class= CCC133} (0) \p{Canonical_Combining_Class: CCC133} (Short: \p{Ccc=CCC133}) (0) T \p{Canonical_Combining_Class: 200} \p{Canonical_Combining_Class= Attached_Below_Left} (0) T \p{Canonical_Combining_Class: 202} \p{Canonical_Combining_Class= Attached_Below} (5) T \p{Canonical_Combining_Class: 214} \p{Canonical_Combining_Class= Attached_Above} (1) T \p{Canonical_Combining_Class: 216} \p{Canonical_Combining_Class= Attached_Above_Right} (9) T \p{Canonical_Combining_Class: 218} \p{Canonical_Combining_Class= Below_Left} (1) T \p{Canonical_Combining_Class: 220} \p{Canonical_Combining_Class= Below} (165) T \p{Canonical_Combining_Class: 222} \p{Canonical_Combining_Class= Below_Right} (4) T \p{Canonical_Combining_Class: 224} \p{Canonical_Combining_Class= Left} (2) T \p{Canonical_Combining_Class: 226} \p{Canonical_Combining_Class= Right} (1) T \p{Canonical_Combining_Class: 228} \p{Canonical_Combining_Class= Above_Left} (5) T \p{Canonical_Combining_Class: 230} \p{Canonical_Combining_Class= Above} (484) T \p{Canonical_Combining_Class: 232} \p{Canonical_Combining_Class= Above_Right} (5) T \p{Canonical_Combining_Class: 233} \p{Canonical_Combining_Class= Double_Below} (4) T \p{Canonical_Combining_Class: 234} \p{Canonical_Combining_Class= Double_Above} (5) T \p{Canonical_Combining_Class: 240} \p{Canonical_Combining_Class= Iota_Subscript} (1) \p{Canonical_Combining_Class: A} \p{Canonical_Combining_Class= Above} (484) \p{Canonical_Combining_Class: Above} (Short: \p{Ccc=A}) (484: U+0300..0314, U+033D..0344, U+0346, U+034A..034C, U+0350..0352, U+0357 ...) \p{Canonical_Combining_Class: Above_Left} (Short: \p{Ccc=AL}) (5: U+05AE, U+18A9, U+1DF7..1DF8, U+302B) \p{Canonical_Combining_Class: Above_Right} (Short: \p{Ccc=AR}) (5: U+0315, U+031A, U+0358, U+1DF6, U+302C) \p{Canonical_Combining_Class: AL} \p{Canonical_Combining_Class= Above_Left} (5) \p{Canonical_Combining_Class: AR} \p{Canonical_Combining_Class= Above_Right} (5) \p{Canonical_Combining_Class: ATA} \p{Canonical_Combining_Class= Attached_Above} (1) \p{Canonical_Combining_Class: ATAR} \p{Canonical_Combining_Class= Attached_Above_Right} (9) \p{Canonical_Combining_Class: ATB} \p{Canonical_Combining_Class= Attached_Below} (5) \p{Canonical_Combining_Class: ATBL} \p{Canonical_Combining_Class= Attached_Below_Left} (0) \p{Canonical_Combining_Class: Attached_Above} (Short: \p{Ccc=ATA}) (1: U+1DCE) \p{Canonical_Combining_Class: Attached_Above_Right} (Short: \p{Ccc=ATAR}) (9: U+031B, U+0F39, U+1D165..1D166, U+1D16E..1D172) \p{Canonical_Combining_Class: Attached_Below} (Short: \p{Ccc=ATB}) (5: U+0321..0322, U+0327..0328, U+1DD0) \p{Canonical_Combining_Class: Attached_Below_Left} (Short: \p{Ccc= ATBL}) (0) \p{Canonical_Combining_Class: B} \p{Canonical_Combining_Class= Below} (165) \p{Canonical_Combining_Class: Below} (Short: \p{Ccc=B}) (165: U+0316..0319, U+031C..0320, U+0323..0326, U+0329..0333, U+0339..033C, U+0347..0349 ...) \p{Canonical_Combining_Class: Below_Left} (Short: \p{Ccc=BL}) (1: U+302A) \p{Canonical_Combining_Class: Below_Right} (Short: \p{Ccc=BR}) (4: U+059A, U+05AD, U+1939, U+302D) \p{Canonical_Combining_Class: BL} \p{Canonical_Combining_Class= Below_Left} (1) \p{Canonical_Combining_Class: BR} \p{Canonical_Combining_Class= Below_Right} (4) \p{Canonical_Combining_Class: DA} \p{Canonical_Combining_Class= Double_Above} (5) \p{Canonical_Combining_Class: DB} \p{Canonical_Combining_Class= Double_Below} (4) \p{Canonical_Combining_Class: Double_Above} (Short: \p{Ccc=DA}) (5: U+035D..035E, U+0360..0361, U+1DCD) \p{Canonical_Combining_Class: Double_Below} (Short: \p{Ccc=DB}) (4: U+035C, U+035F, U+0362, U+1DFC) \p{Canonical_Combining_Class: Han_Reading} (Short: \p{Ccc=HANR}) (2: U+16FF0..16FF1) \p{Canonical_Combining_Class: HANR} \p{Canonical_Combining_Class= Han_Reading} (2) \p{Canonical_Combining_Class: Iota_Subscript} (Short: \p{Ccc=IS}) (1: U+0345) \p{Canonical_Combining_Class: IS} \p{Canonical_Combining_Class= Iota_Subscript} (1) \p{Canonical_Combining_Class: Kana_Voicing} (Short: \p{Ccc=KV}) (2: U+3099..309A) \p{Canonical_Combining_Class: KV} \p{Canonical_Combining_Class= Kana_Voicing} (2) \p{Canonical_Combining_Class: L} \p{Canonical_Combining_Class= Left} (2) \p{Canonical_Combining_Class: Left} (Short: \p{Ccc=L}) (2: U+302E..302F) \p{Canonical_Combining_Class: NK} \p{Canonical_Combining_Class= Nukta} (26) \p{Canonical_Combining_Class: Not_Reordered} (Short: \p{Ccc=NR}) (1_113_240 plus all above-Unicode code points: U+0000..02FF, U+034F, U+0370..0482, U+0488..0590, U+05BE, U+05C0 ...) \p{Canonical_Combining_Class: NR} \p{Canonical_Combining_Class= Not_Reordered} (1_113_240 plus all above-Unicode code points) \p{Canonical_Combining_Class: Nukta} (Short: \p{Ccc=NK}) (26: U+093C, U+09BC, U+0A3C, U+0ABC, U+0B3C, U+0CBC ...) \p{Canonical_Combining_Class: OV} \p{Canonical_Combining_Class= Overlay} (32) \p{Canonical_Combining_Class: Overlay} (Short: \p{Ccc=OV}) (32: U+0334..0338, U+1CD4, U+1CE2..1CE8, U+20D2..20D3, U+20D8..20DA, U+20E5..20E6 ...) \p{Canonical_Combining_Class: R} \p{Canonical_Combining_Class= Right} (1) \p{Canonical_Combining_Class: Right} (Short: \p{Ccc=R}) (1: U+1D16D) \p{Canonical_Combining_Class: Virama} (Short: \p{Ccc=VR}) (61: U+094D, U+09CD, U+0A4D, U+0ACD, U+0B4D, U+0BCD ...) \p{Canonical_Combining_Class: VR} \p{Canonical_Combining_Class= Virama} (61) \p{Cans} \p{Canadian_Aboriginal} (= \p{Script_Extensions= Canadian_Aboriginal}) (710) \p{Cari} \p{Carian} (= \p{Script_Extensions= Carian}) (NOT \p{Block=Carian}) (49) \p{Carian} \p{Script_Extensions=Carian} (Short: \p{Cari}; NOT \p{Block=Carian}) (49) \p{Case_Ignorable} \p{Case_Ignorable=Y} (Short: \p{CI}) (2413) \p{Case_Ignorable: N*} (Short: \p{CI=N}, \P{CI}) (1_111_699 plus all above-Unicode code points: [\x00- \x20!\"#\$\%&\(\)*+,\-\/0-9;<=>?\@A-Z \[\\\]_a-z\{\|\}~\x7f-\xa7\xa9-\xac\xae \xb0-\xb3\xb5-\xb6\xb9-\xff], U+0100..02AF, U+0370..0373, U+0376..0379, U+037B..0383, U+0386 ...) \p{Case_Ignorable: Y*} (Short: \p{CI=Y}, \p{CI}) (2413: [\'.:\^` \xa8\xad\xaf\xb4\xb7-\xb8], U+02B0..036F, U+0374..0375, U+037A, U+0384..0385, U+0387 ...) \p{Cased} \p{Cased=Y} (4286) \p{Cased: N*} (Single: \P{Cased}) (1_109_826 plus all above-Unicode code points: [\x00-\x20! \"#\$\%&\'\(\)*+,\-.\/0-9:;<=>?\@\[\\\] \^_`\{\|\}~\x7f-\xa9\xab-\xb4\xb6-\xb9 \xbb-\xbf\xd7\xf7], U+01BB, U+01C0..01C3, U+0294, U+02B9..02BF, U+02C2..02DF ...) \p{Cased: Y*} (Single: \p{Cased}) (4286: [A-Za-z\xaa \xb5\xba\xc0-\xd6\xd8-\xf6\xf8-\xff], U+0100..01BA, U+01BC..01BF, U+01C4..0293, U+0295..02B8, U+02C0..02C1 ...) \p{Cased_Letter} \p{General_Category=Cased_Letter} (Short: \p{LC}) (3977) \p{Category: *} \p{General_Category: *} \p{Caucasian_Albanian} \p{Script_Extensions=Caucasian_Albanian} (Short: \p{Aghb}; NOT \p{Block= Caucasian_Albanian}) (53) \p{Cc} \p{XPosixCntrl} (= \p{General_Category= Control}) (65) \p{Ccc: *} \p{Canonical_Combining_Class: *} \p{CE} \p{Composition_Exclusion} (= \p{Composition_Exclusion=Y}) (81) \p{CE: *} \p{Composition_Exclusion: *} \p{Cf} \p{Format} (= \p{General_Category=Format}) (161) \p{Chakma} \p{Script_Extensions=Chakma} (Short: \p{Cakm}; NOT \p{Block=Chakma}) (91) \p{Cham} \p{Script_Extensions=Cham} (NOT \p{Block= Cham}) (83) \p{Changes_When_Casefolded} \p{Changes_When_Casefolded=Y} (Short: \p{CWCF}) (1466) \p{Changes_When_Casefolded: N*} (Short: \p{CWCF=N}, \P{CWCF}) (1_112_646 plus all above-Unicode code points: [\x00-\x20!\"#\$\%&\'\(\)*+,\-. \/0-9:;<=>?\@\[\\\]\^_`a-z\{\|\}~\x7f- \xb4\xb6-\xbf\xd7\xe0-\xff], U+0101, U+0103, U+0105, U+0107, U+0109 ...) \p{Changes_When_Casefolded: Y*} (Short: \p{CWCF=Y}, \p{CWCF}) (1466: [A-Z\xb5\xc0-\xd6\xd8-\xdf], U+0100, U+0102, U+0104, U+0106, U+0108 ...) \p{Changes_When_Casemapped} \p{Changes_When_Casemapped=Y} (Short: \p{CWCM}) (2847) \p{Changes_When_Casemapped: N*} (Short: \p{CWCM=N}, \P{CWCM}) (1_111_265 plus all above-Unicode code points: [\x00-\x20!\"#\$\%&\'\(\)*+,\-. \/0-9:;<=>?\@\[\\\]\^_`\{\|\}~\x7f-\xb4 \xb6-\xbf\xd7\xf7], U+0138, U+018D, U+019B, U+01AA..01AB, U+01BA..01BB ...) \p{Changes_When_Casemapped: Y*} (Short: \p{CWCM=Y}, \p{CWCM}) (2847: [A-Za-z\xb5\xc0-\xd6\xd8-\xf6 \xf8-\xff], U+0100..0137, U+0139..018C, U+018E..019A, U+019C..01A9, U+01AC..01B9 ...) \p{Changes_When_Lowercased} \p{Changes_When_Lowercased=Y} (Short: \p{CWL}) (1393) \p{Changes_When_Lowercased: N*} (Short: \p{CWL=N}, \P{CWL}) (1_112_719 plus all above-Unicode code points: [\x00-\x20!\"#\$\%&\'\(\)*+,\-. \/0-9:;<=>?\@\[\\\]\^_`a-z\{\|\}~\x7f- \xbf\xd7\xdf-\xff], U+0101, U+0103, U+0105, U+0107, U+0109 ...) \p{Changes_When_Lowercased: Y*} (Short: \p{CWL=Y}, \p{CWL}) (1393: [A-Z\xc0-\xd6\xd8-\xde], U+0100, U+0102, U+0104, U+0106, U+0108 ...) \p{Changes_When_NFKC_Casefolded} \p{Changes_When_NFKC_Casefolded= Y} (Short: \p{CWKCF}) (10_329) \p{Changes_When_NFKC_Casefolded: N*} (Short: \p{CWKCF=N}, \P{CWKCF}) (1_103_783 plus all above- Unicode code points: [\x00-\x20!\"#\$ \%&\'\(\)*+,\-.\/0-9:;<=>?\@\[\\\]\^_`a- z\{\|\}~\x7f-\x9f\xa1-\xa7\xa9\xab-\xac \xae\xb0-\xb1\xb6-\xb7\xbb\xbf\xd7\xe0- \xff], U+0101, U+0103, U+0105, U+0107, U+0109 ...) \p{Changes_When_NFKC_Casefolded: Y*} (Short: \p{CWKCF=Y}, \p{CWKCF}) (10_329: [A-Z\xa0\xa8\xaa \xad\xaf\xb2-\xb5\xb8-\xba\xbc-\xbe\xc0- \xd6\xd8-\xdf], U+0100, U+0102, U+0104, U+0106, U+0108 ...) \p{Changes_When_Titlecased} \p{Changes_When_Titlecased=Y} (Short: \p{CWT}) (1412) \p{Changes_When_Titlecased: N*} (Short: \p{CWT=N}, \P{CWT}) (1_112_700 plus all above-Unicode code points: [\x00-\x20!\"#\$\%&\'\(\)*+,\-. \/0-9:;<=>?\@A-Z\[\\\]\^_`\{\|\}~\x7f- \xb4\xb6-\xde\xf7], U+0100, U+0102, U+0104, U+0106, U+0108 ...) \p{Changes_When_Titlecased: Y*} (Short: \p{CWT=Y}, \p{CWT}) (1412: [a-z\xb5\xdf-\xf6\xf8-\xff], U+0101, U+0103, U+0105, U+0107, U+0109 ...) \p{Changes_When_Uppercased} \p{Changes_When_Uppercased=Y} (Short: \p{CWU}) (1485) \p{Changes_When_Uppercased: N*} (Short: \p{CWU=N}, \P{CWU}) (1_112_627 plus all above-Unicode code points: [\x00-\x20!\"#\$\%&\'\(\)*+,\-. \/0-9:;<=>?\@A-Z\[\\\]\^_`\{\|\}~\x7f- \xb4\xb6-\xde\xf7], U+0100, U+0102, U+0104, U+0106, U+0108 ...) \p{Changes_When_Uppercased: Y*} (Short: \p{CWU=Y}, \p{CWU}) (1485: [a-z\xb5\xdf-\xf6\xf8-\xff], U+0101, U+0103, U+0105, U+0107, U+0109 ...) \p{Cher} \p{Cherokee} (= \p{Script_Extensions= Cherokee}) (NOT \p{Block=Cherokee}) (172) \p{Cherokee} \p{Script_Extensions=Cherokee} (Short: \p{Cher}; NOT \p{Block=Cherokee}) (172) X \p{Cherokee_Sup} \p{Cherokee_Supplement} (= \p{Block= Cherokee_Supplement}) (80) X \p{Cherokee_Supplement} \p{Block=Cherokee_Supplement} (Short: \p{InCherokeeSup}) (80) X \p{Chess_Symbols} \p{Block=Chess_Symbols} (112) \p{Chorasmian} \p{Script_Extensions=Chorasmian} (Short: \p{Chrs}; NOT \p{Block=Chorasmian}) (28) \p{Chrs} \p{Chorasmian} (= \p{Script_Extensions= Chorasmian}) (NOT \p{Block=Chorasmian}) (28) \p{CI} \p{Case_Ignorable} (= \p{Case_Ignorable= Y}) (2413) \p{CI: *} \p{Case_Ignorable: *} X \p{CJK} \p{CJK_Unified_Ideographs} (= \p{Block= CJK_Unified_Ideographs}) (20_992) X \p{CJK_Compat} \p{CJK_Compatibility} (= \p{Block= CJK_Compatibility}) (256) X \p{CJK_Compat_Forms} \p{CJK_Compatibility_Forms} (= \p{Block= CJK_Compatibility_Forms}) (32) X \p{CJK_Compat_Ideographs} \p{CJK_Compatibility_Ideographs} (= \p{Block=CJK_Compatibility_Ideographs}) (512) X \p{CJK_Compat_Ideographs_Sup} \p{CJK_Compatibility_Ideographs_- Supplement} (= \p{Block= CJK_Compatibility_Ideographs_- Supplement}) (544) X \p{CJK_Compatibility} \p{Block=CJK_Compatibility} (Short: \p{InCJKCompat}) (256) X \p{CJK_Compatibility_Forms} \p{Block=CJK_Compatibility_Forms} (Short: \p{InCJKCompatForms}) (32) X \p{CJK_Compatibility_Ideographs} \p{Block= CJK_Compatibility_Ideographs} (Short: \p{InCJKCompatIdeographs}) (512) X \p{CJK_Compatibility_Ideographs_Supplement} \p{Block= CJK_Compatibility_Ideographs_Supplement} (Short: \p{InCJKCompatIdeographsSup}) (544) X \p{CJK_Ext_A} \p{CJK_Unified_Ideographs_Extension_A} (= \p{Block= CJK_Unified_Ideographs_Extension_A}) (6592) X \p{CJK_Ext_B} \p{CJK_Unified_Ideographs_Extension_B} (= \p{Block= CJK_Unified_Ideographs_Extension_B}) (42_720) X \p{CJK_Ext_C} \p{CJK_Unified_Ideographs_Extension_C} (= \p{Block= CJK_Unified_Ideographs_Extension_C}) (4160) X \p{CJK_Ext_D} \p{CJK_Unified_Ideographs_Extension_D} (= \p{Block= CJK_Unified_Ideographs_Extension_D}) (224) X \p{CJK_Ext_E} \p{CJK_Unified_Ideographs_Extension_E} (= \p{Block= CJK_Unified_Ideographs_Extension_E}) (5776) X \p{CJK_Ext_F} \p{CJK_Unified_Ideographs_Extension_F} (= \p{Block= CJK_Unified_Ideographs_Extension_F}) (7488) X \p{CJK_Ext_G} \p{CJK_Unified_Ideographs_Extension_G} (= \p{Block= CJK_Unified_Ideographs_Extension_G}) (4944) X \p{CJK_Radicals_Sup} \p{CJK_Radicals_Supplement} (= \p{Block= CJK_Radicals_Supplement}) (128) X \p{CJK_Radicals_Supplement} \p{Block=CJK_Radicals_Supplement} (Short: \p{InCJKRadicalsSup}) (128) X \p{CJK_Strokes} \p{Block=CJK_Strokes} (48) X \p{CJK_Symbols} \p{CJK_Symbols_And_Punctuation} (= \p{Block=CJK_Symbols_And_Punctuation}) (64) X \p{CJK_Symbols_And_Punctuation} \p{Block= CJK_Symbols_And_Punctuation} (Short: \p{InCJKSymbols}) (64) X \p{CJK_Unified_Ideographs} \p{Block=CJK_Unified_Ideographs} (Short: \p{InCJK}) (20_992) X \p{CJK_Unified_Ideographs_Extension_A} \p{Block= CJK_Unified_Ideographs_Extension_A} (Short: \p{InCJKExtA}) (6592) X \p{CJK_Unified_Ideographs_Extension_B} \p{Block= CJK_Unified_Ideographs_Extension_B} (Short: \p{InCJKExtB}) (42_720) X \p{CJK_Unified_Ideographs_Extension_C} \p{Block= CJK_Unified_Ideographs_Extension_C} (Short: \p{InCJKExtC}) (4160) X \p{CJK_Unified_Ideographs_Extension_D} \p{Block= CJK_Unified_Ideographs_Extension_D} (Short: \p{InCJKExtD}) (224) X \p{CJK_Unified_Ideographs_Extension_E} \p{Block= CJK_Unified_Ideographs_Extension_E} (Short: \p{InCJKExtE}) (5776) X \p{CJK_Unified_Ideographs_Extension_F} \p{Block= CJK_Unified_Ideographs_Extension_F} (Short: \p{InCJKExtF}) (7488) X \p{CJK_Unified_Ideographs_Extension_G} \p{Block= CJK_Unified_Ideographs_Extension_G} (Short: \p{InCJKExtG}) (4944) \p{Close_Punctuation} \p{General_Category=Close_Punctuation} (Short: \p{Pe}) (73) \p{Cn} \p{Unassigned} (= \p{General_Category= Unassigned}) (830_672 plus all above- Unicode code points) \p{Cntrl} \p{XPosixCntrl} (= \p{General_Category= Control}) (65) \p{Co} \p{Private_Use} (= \p{General_Category= Private_Use}) (NOT \p{Private_Use_Area}) (137_468) X \p{Combining_Diacritical_Marks} \p{Block= Combining_Diacritical_Marks} (Short: \p{InDiacriticals}) (112) X \p{Combining_Diacritical_Marks_Extended} \p{Block= Combining_Diacritical_Marks_Extended} (Short: \p{InDiacriticalsExt}) (80) X \p{Combining_Diacritical_Marks_For_Symbols} \p{Block= Combining_Diacritical_Marks_For_Symbols} (Short: \p{InDiacriticalsForSymbols}) (48) X \p{Combining_Diacritical_Marks_Supplement} \p{Block= Combining_Diacritical_Marks_Supplement} (Short: \p{InDiacriticalsSup}) (64) X \p{Combining_Half_Marks} \p{Block=Combining_Half_Marks} (Short: \p{InHalfMarks}) (16) \p{Combining_Mark} \p{Mark} (= \p{General_Category=Mark}) (2295) X \p{Combining_Marks_For_Symbols} \p{Combining_Diacritical_Marks_For_- Symbols} (= \p{Block= Combining_Diacritical_Marks_For_- Symbols}) (48) \p{Common} \p{Script_Extensions=Common} (Short: \p{Zyyy}) (7661) X \p{Common_Indic_Number_Forms} \p{Block=Common_Indic_Number_Forms} (Short: \p{InIndicNumberForms}) (16) \p{Comp_Ex} \p{Full_Composition_Exclusion} (= \p{Full_Composition_Exclusion=Y}) (1120) \p{Comp_Ex: *} \p{Full_Composition_Exclusion: *} X \p{Compat_Jamo} \p{Hangul_Compatibility_Jamo} (= \p{Block= Hangul_Compatibility_Jamo}) (96) \p{Composition_Exclusion} \p{Composition_Exclusion=Y} (Short: \p{CE}) (81) \p{Composition_Exclusion: N*} (Short: \p{CE=N}, \P{CE}) (1_114_031 plus all above-Unicode code points: U+0000..0957, U+0960..09DB, U+09DE, U+09E0..0A32, U+0A34..0A35, U+0A37..0A58 ...) \p{Composition_Exclusion: Y*} (Short: \p{CE=Y}, \p{CE}) (81: U+0958..095F, U+09DC..09DD, U+09DF, U+0A33, U+0A36, U+0A59..0A5B ...) \p{Connector_Punctuation} \p{General_Category= Connector_Punctuation} (Short: \p{Pc}) (10) \p{Control} \p{XPosixCntrl} (= \p{General_Category= Control}) (65) X \p{Control_Pictures} \p{Block=Control_Pictures} (64) \p{Copt} \p{Coptic} (= \p{Script_Extensions= Coptic}) (NOT \p{Block=Coptic}) (165) \p{Coptic} \p{Script_Extensions=Coptic} (Short: \p{Copt}; NOT \p{Block=Coptic}) (165) X \p{Coptic_Epact_Numbers} \p{Block=Coptic_Epact_Numbers} (32) X \p{Counting_Rod} \p{Counting_Rod_Numerals} (= \p{Block= Counting_Rod_Numerals}) (32) X \p{Counting_Rod_Numerals} \p{Block=Counting_Rod_Numerals} (Short: \p{InCountingRod}) (32) \p{Cprt} \p{Cypriot} (= \p{Script_Extensions= Cypriot}) (112) \p{Cs} \p{Surrogate} (= \p{General_Category= Surrogate}) (2048) \p{Cuneiform} \p{Script_Extensions=Cuneiform} (Short: \p{Xsux}; NOT \p{Block=Cuneiform}) (1234) X \p{Cuneiform_Numbers} \p{Cuneiform_Numbers_And_Punctuation} (= \p{Block= Cuneiform_Numbers_And_Punctuation}) (128) X \p{Cuneiform_Numbers_And_Punctuation} \p{Block= Cuneiform_Numbers_And_Punctuation} (Short: \p{InCuneiformNumbers}) (128) \p{Currency_Symbol} \p{General_Category=Currency_Symbol} (Short: \p{Sc}) (62) X \p{Currency_Symbols} \p{Block=Currency_Symbols} (48) \p{CWCF} \p{Changes_When_Casefolded} (= \p{Changes_When_Casefolded=Y}) (1466) \p{CWCF: *} \p{Changes_When_Casefolded: *} \p{CWCM} \p{Changes_When_Casemapped} (= \p{Changes_When_Casemapped=Y}) (2847) \p{CWCM: *} \p{Changes_When_Casemapped: *} \p{CWKCF} \p{Changes_When_NFKC_Casefolded} (= \p{Changes_When_NFKC_Casefolded=Y}) (10_329) \p{CWKCF: *} \p{Changes_When_NFKC_Casefolded: *} \p{CWL} \p{Changes_When_Lowercased} (= \p{Changes_When_Lowercased=Y}) (1393) \p{CWL: *} \p{Changes_When_Lowercased: *} \p{CWT} \p{Changes_When_Titlecased} (= \p{Changes_When_Titlecased=Y}) (1412) \p{CWT: *} \p{Changes_When_Titlecased: *} \p{CWU} \p{Changes_When_Uppercased} (= \p{Changes_When_Uppercased=Y}) (1485) \p{CWU: *} \p{Changes_When_Uppercased: *} \p{Cypriot} \p{Script_Extensions=Cypriot} (Short: \p{Cprt}) (112) X \p{Cypriot_Syllabary} \p{Block=Cypriot_Syllabary} (64) \p{Cyrillic} \p{Script_Extensions=Cyrillic} (Short: \p{Cyrl}; NOT \p{Block=Cyrillic}) (447) X \p{Cyrillic_Ext_A} \p{Cyrillic_Extended_A} (= \p{Block= Cyrillic_Extended_A}) (32) X \p{Cyrillic_Ext_B} \p{Cyrillic_Extended_B} (= \p{Block= Cyrillic_Extended_B}) (96) X \p{Cyrillic_Ext_C} \p{Cyrillic_Extended_C} (= \p{Block= Cyrillic_Extended_C}) (16) X \p{Cyrillic_Extended_A} \p{Block=Cyrillic_Extended_A} (Short: \p{InCyrillicExtA}) (32) X \p{Cyrillic_Extended_B} \p{Block=Cyrillic_Extended_B} (Short: \p{InCyrillicExtB}) (96) X \p{Cyrillic_Extended_C} \p{Block=Cyrillic_Extended_C} (Short: \p{InCyrillicExtC}) (16) X \p{Cyrillic_Sup} \p{Cyrillic_Supplement} (= \p{Block= Cyrillic_Supplement}) (48) X \p{Cyrillic_Supplement} \p{Block=Cyrillic_Supplement} (Short: \p{InCyrillicSup}) (48) X \p{Cyrillic_Supplementary} \p{Cyrillic_Supplement} (= \p{Block= Cyrillic_Supplement}) (48) \p{Cyrl} \p{Cyrillic} (= \p{Script_Extensions= Cyrillic}) (NOT \p{Block=Cyrillic}) (447) \p{Dash} \p{Dash=Y} (29) \p{Dash: N*} (Single: \P{Dash}) (1_114_083 plus all above-Unicode code points: [\x00-\x20! \"#\$\%&\'\(\)*+,.\/0-9:;<=>?\@A-Z \[\\\]\^_`a-z\{\|\}~\x7f-\xff], U+0100..0589, U+058B..05BD, U+05BF..13FF, U+1401..1805, U+1807..200F ...) \p{Dash: Y*} (Single: \p{Dash}) (29: [\-], U+058A, U+05BE, U+1400, U+1806, U+2010..2015 ...) \p{Dash_Punctuation} \p{General_Category=Dash_Punctuation} (Short: \p{Pd}) (25) \p{Decimal_Number} \p{XPosixDigit} (= \p{General_Category= Decimal_Number}) (650) \p{Decomposition_Type: Can} \p{Decomposition_Type=Canonical} (13_233) \p{Decomposition_Type: Canonical} (Short: \p{Dt=Can}) (13_233: [\xc0-\xc5\xc7-\xcf\xd1-\xd6\xd9-\xdd \xe0-\xe5\xe7-\xef\xf1-\xf6\xf9-\xfd \xff], U+0100..010F, U+0112..0125, U+0128..0130, U+0134..0137, U+0139..013E ...) \p{Decomposition_Type: Circle} (Short: \p{Dt=Enc}) (240: U+2460..2473, U+24B6..24EA, U+3244..3247, U+3251..327E, U+3280..32BF, U+32D0..32FE ...) \p{Decomposition_Type: Com} \p{Decomposition_Type=Compat} (720) \p{Decomposition_Type: Compat} (Short: \p{Dt=Com}) (720: [\xa8 \xaf\xb4-\xb5\xb8], U+0132..0133, U+013F..0140, U+0149, U+017F, U+01C4..01CC ...) \p{Decomposition_Type: Enc} \p{Decomposition_Type=Circle} (240) \p{Decomposition_Type: Fin} \p{Decomposition_Type=Final} (240) \p{Decomposition_Type: Final} (Short: \p{Dt=Fin}) (240: U+FB51, U+FB53, U+FB57, U+FB5B, U+FB5F, U+FB63 ...) \p{Decomposition_Type: Font} (Short: \p{Dt=Font}) (1194: U+2102, U+210A..2113, U+2115, U+2119..211D, U+2124, U+2128 ...) \p{Decomposition_Type: Fra} \p{Decomposition_Type=Fraction} (20) \p{Decomposition_Type: Fraction} (Short: \p{Dt=Fra}) (20: [\xbc- \xbe], U+2150..215F, U+2189) \p{Decomposition_Type: Init} \p{Decomposition_Type=Initial} (171) \p{Decomposition_Type: Initial} (Short: \p{Dt=Init}) (171: U+FB54, U+FB58, U+FB5C, U+FB60, U+FB64, U+FB68 ...) \p{Decomposition_Type: Iso} \p{Decomposition_Type=Isolated} (238) \p{Decomposition_Type: Isolated} (Short: \p{Dt=Iso}) (238: U+FB50, U+FB52, U+FB56, U+FB5A, U+FB5E, U+FB62 ...) \p{Decomposition_Type: Med} \p{Decomposition_Type=Medial} (82) \p{Decomposition_Type: Medial} (Short: \p{Dt=Med}) (82: U+FB55, U+FB59, U+FB5D, U+FB61, U+FB65, U+FB69 ...) \p{Decomposition_Type: Nar} \p{Decomposition_Type=Narrow} (122) \p{Decomposition_Type: Narrow} (Short: \p{Dt=Nar}) (122: U+FF61..FFBE, U+FFC2..FFC7, U+FFCA..FFCF, U+FFD2..FFD7, U+FFDA..FFDC, U+FFE8..FFEE) \p{Decomposition_Type: Nb} \p{Decomposition_Type=Nobreak} (5) \p{Decomposition_Type: Nobreak} (Short: \p{Dt=Nb}) (5: [\xa0], U+0F0C, U+2007, U+2011, U+202F) \p{Decomposition_Type: Non_Canon} \p{Decomposition_Type= Non_Canonical} (Perl extension) (3675) \p{Decomposition_Type: Non_Canonical} Union of all non-canonical decompositions (Short: \p{Dt=NonCanon}) (Perl extension) (3675: [\xa0\xa8\xaa \xaf\xb2-\xb5\xb8-\xba\xbc-\xbe], U+0132..0133, U+013F..0140, U+0149, U+017F, U+01C4..01CC ...) \p{Decomposition_Type: None} (Short: \p{Dt=None}) (1_097_204 plus all above-Unicode code points: [\x00- \x9f\xa1-\xa7\xa9\xab-\xae\xb0-\xb1\xb6- \xb7\xbb\xbf\xc6\xd0\xd7-\xd8\xde-\xdf \xe6\xf0\xf7-\xf8\xfe], U+0110..0111, U+0126..0127, U+0131, U+0138, U+0141..0142 ...) \p{Decomposition_Type: Small} (Short: \p{Dt=Sml}) (26: U+FE50..FE52, U+FE54..FE66, U+FE68..FE6B) \p{Decomposition_Type: Sml} \p{Decomposition_Type=Small} (26) \p{Decomposition_Type: Sqr} \p{Decomposition_Type=Square} (286) \p{Decomposition_Type: Square} (Short: \p{Dt=Sqr}) (286: U+3250, U+32CC..32CF, U+32FF..3357, U+3371..33DF, U+33FF, U+1F130..1F14F ...) \p{Decomposition_Type: Sub} (Short: \p{Dt=Sub}) (38: U+1D62..1D6A, U+2080..208E, U+2090..209C, U+2C7C) \p{Decomposition_Type: Sup} \p{Decomposition_Type=Super} (154) \p{Decomposition_Type: Super} (Short: \p{Dt=Sup}) (154: [\xaa\xb2- \xb3\xb9-\xba], U+02B0..02B8, U+02E0..02E4, U+10FC, U+1D2C..1D2E, U+1D30..1D3A ...) \p{Decomposition_Type: Vert} \p{Decomposition_Type=Vertical} (35) \p{Decomposition_Type: Vertical} (Short: \p{Dt=Vert}) (35: U+309F, U+30FF, U+FE10..FE19, U+FE30..FE44, U+FE47..FE48) \p{Decomposition_Type: Wide} (Short: \p{Dt=Wide}) (104: U+3000, U+FF01..FF60, U+FFE0..FFE6) \p{Default_Ignorable_Code_Point} \p{Default_Ignorable_Code_Point= Y} (Short: \p{DI}) (4173) \p{Default_Ignorable_Code_Point: N*} (Short: \p{DI=N}, \P{DI}) (1_109_939 plus all above-Unicode code points: [\x00-\xac\xae-\xff], U+0100..034E, U+0350..061B, U+061D..115E, U+1161..17B3, U+17B6..180A ...) \p{Default_Ignorable_Code_Point: Y*} (Short: \p{DI=Y}, \p{DI}) (4173: [\xad], U+034F, U+061C, U+115F..1160, U+17B4..17B5, U+180B..180E ...) \p{Dep} \p{Deprecated} (= \p{Deprecated=Y}) (15) \p{Dep: *} \p{Deprecated: *} \p{Deprecated} \p{Deprecated=Y} (Short: \p{Dep}) (15) \p{Deprecated: N*} (Short: \p{Dep=N}, \P{Dep}) (1_114_097 plus all above-Unicode code points: U+0000..0148, U+014A..0672, U+0674..0F76, U+0F78, U+0F7A..17A2, U+17A5..2069 ...) \p{Deprecated: Y*} (Short: \p{Dep=Y}, \p{Dep}) (15: U+0149, U+0673, U+0F77, U+0F79, U+17A3..17A4, U+206A..206F ...) \p{Deseret} \p{Script_Extensions=Deseret} (Short: \p{Dsrt}) (80) \p{Deva} \p{Devanagari} (= \p{Script_Extensions= Devanagari}) (NOT \p{Block=Devanagari}) (210) \p{Devanagari} \p{Script_Extensions=Devanagari} (Short: \p{Deva}; NOT \p{Block=Devanagari}) (210) X \p{Devanagari_Ext} \p{Devanagari_Extended} (= \p{Block= Devanagari_Extended}) (32) X \p{Devanagari_Extended} \p{Block=Devanagari_Extended} (Short: \p{InDevanagariExt}) (32) \p{DI} \p{Default_Ignorable_Code_Point} (= \p{Default_Ignorable_Code_Point=Y}) (4173) \p{DI: *} \p{Default_Ignorable_Code_Point: *} \p{Dia} \p{Diacritic} (= \p{Diacritic=Y}) (882) \p{Dia: *} \p{Diacritic: *} \p{Diacritic} \p{Diacritic=Y} (Short: \p{Dia}) (882) \p{Diacritic: N*} (Short: \p{Dia=N}, \P{Dia}) (1_113_230 plus all above-Unicode code points: [\x00-\x20!\"#\$\%&\'\(\)*+,\-.\/0-9:;<= >?\@A-Z\[\\\]_a-z\{\|\}~\x7f-\xa7\xa9- \xae\xb0-\xb3\xb5-\xb6\xb9-\xff], U+0100..02AF, U+034F, U+0358..035C, U+0363..0373, U+0376..0379 ...) \p{Diacritic: Y*} (Short: \p{Dia=Y}, \p{Dia}) (882: [\^` \xa8\xaf\xb4\xb7-\xb8], U+02B0..034E, U+0350..0357, U+035D..0362, U+0374..0375, U+037A ...) X \p{Diacriticals} \p{Combining_Diacritical_Marks} (= \p{Block=Combining_Diacritical_Marks}) (112) X \p{Diacriticals_Ext} \p{Combining_Diacritical_Marks_Extended} (= \p{Block= Combining_Diacritical_Marks_Extended}) (80) X \p{Diacriticals_For_Symbols} \p{Combining_Diacritical_Marks_For_- Symbols} (= \p{Block= Combining_Diacritical_Marks_For_- Symbols}) (48) X \p{Diacriticals_Sup} \p{Combining_Diacritical_Marks_Supplement} (= \p{Block= Combining_Diacritical_Marks_Supplement}) (64) \p{Diak} \p{Dives_Akuru} (= \p{Script_Extensions= Dives_Akuru}) (NOT \p{Block= Dives_Akuru}) (72) \p{Digit} \p{XPosixDigit} (= \p{General_Category= Decimal_Number}) (650) X \p{Dingbats} \p{Block=Dingbats} (192) \p{Dives_Akuru} \p{Script_Extensions=Dives_Akuru} (Short: \p{Diak}; NOT \p{Block=Dives_Akuru}) (72) \p{Dogr} \p{Dogra} (= \p{Script_Extensions=Dogra}) (NOT \p{Block=Dogra}) (82) \p{Dogra} \p{Script_Extensions=Dogra} (Short: \p{Dogr}; NOT \p{Block=Dogra}) (82) X \p{Domino} \p{Domino_Tiles} (= \p{Block= Domino_Tiles}) (112) X \p{Domino_Tiles} \p{Block=Domino_Tiles} (Short: \p{InDomino}) (112) \p{Dsrt} \p{Deseret} (= \p{Script_Extensions= Deseret}) (80) \p{Dt: *} \p{Decomposition_Type: *} \p{Dupl} \p{Duployan} (= \p{Script_Extensions= Duployan}) (NOT \p{Block=Duployan}) (147) \p{Duployan} \p{Script_Extensions=Duployan} (Short: \p{Dupl}; NOT \p{Block=Duployan}) (147) \p{Ea: *} \p{East_Asian_Width: *} X \p{Early_Dynastic_Cuneiform} \p{Block=Early_Dynastic_Cuneiform} (208) \p{East_Asian_Width: A} \p{East_Asian_Width=Ambiguous} (138_739) \p{East_Asian_Width: Ambiguous} (Short: \p{Ea=A}) (138_739: [\xa1 \xa4\xa7-\xa8\xaa\xad-\xae\xb0-\xb4\xb6- \xba\xbc-\xbf\xc6\xd0\xd7-\xd8\xde-\xe1 \xe6\xe8-\xea\xec-\xed\xf0\xf2-\xf3\xf7- \xfa\xfc\xfe], U+0101, U+0111, U+0113, U+011B, U+0126..0127 ...) \p{East_Asian_Width: F} \p{East_Asian_Width=Fullwidth} (104) \p{East_Asian_Width: Fullwidth} (Short: \p{Ea=F}) (104: U+3000, U+FF01..FF60, U+FFE0..FFE6) \p{East_Asian_Width: H} \p{East_Asian_Width=Halfwidth} (123) \p{East_Asian_Width: Halfwidth} (Short: \p{Ea=H}) (123: U+20A9, U+FF61..FFBE, U+FFC2..FFC7, U+FFCA..FFCF, U+FFD2..FFD7, U+FFDA..FFDC ...) \p{East_Asian_Width: N} \p{East_Asian_Width=Neutral} (792_699 plus all above-Unicode code points) \p{East_Asian_Width: Na} \p{East_Asian_Width=Narrow} (111) \p{East_Asian_Width: Narrow} (Short: \p{Ea=Na}) (111: [\x20-\x7e \xa2-\xa3\xa5-\xa6\xac\xaf], U+27E6..27ED, U+2985..2986) \p{East_Asian_Width: Neutral} (Short: \p{Ea=N}) (792_699 plus all above-Unicode code points: [\x00-\x1f \x7f-\xa0\xa9\xab\xb5\xbb\xc0-\xc5\xc7- \xcf\xd1-\xd6\xd9-\xdd\xe2-\xe5\xe7\xeb \xee-\xef\xf1\xf4-\xf6\xfb\xfd\xff], U+00FF..0100, U+0102..0110, U+0112, U+0114..011A, U+011C..0125 ...) \p{East_Asian_Width: W} \p{East_Asian_Width=Wide} (182_336) \p{East_Asian_Width: Wide} (Short: \p{Ea=W}) (182_336: U+1100..115F, U+231A..231B, U+2329..232A, U+23E9..23EC, U+23F0, U+23F3 ...) \p{EBase} \p{Emoji_Modifier_Base} (= \p{Emoji_Modifier_Base=Y}) (122) \p{EBase: *} \p{Emoji_Modifier_Base: *} \p{EComp} \p{Emoji_Component} (= \p{Emoji_Component= Y}) (146) \p{EComp: *} \p{Emoji_Component: *} \p{Egyp} \p{Egyptian_Hieroglyphs} (= \p{Script_Extensions= Egyptian_Hieroglyphs}) (NOT \p{Block= Egyptian_Hieroglyphs}) (1080) X \p{Egyptian_Hieroglyph_Format_Controls} \p{Block= Egyptian_Hieroglyph_Format_Controls} (16) \p{Egyptian_Hieroglyphs} \p{Script_Extensions= Egyptian_Hieroglyphs} (Short: \p{Egyp}; NOT \p{Block=Egyptian_Hieroglyphs}) (1080) \p{Elba} \p{Elbasan} (= \p{Script_Extensions= Elbasan}) (NOT \p{Block=Elbasan}) (40) \p{Elbasan} \p{Script_Extensions=Elbasan} (Short: \p{Elba}; NOT \p{Block=Elbasan}) (40) \p{Elym} \p{Elymaic} (= \p{Script_Extensions= Elymaic}) (NOT \p{Block=Elymaic}) (23) \p{Elymaic} \p{Script_Extensions=Elymaic} (Short: \p{Elym}; NOT \p{Block=Elymaic}) (23) \p{EMod} \p{Emoji_Modifier} (= \p{Emoji_Modifier= Y}) (5) \p{EMod: *} \p{Emoji_Modifier: *} \p{Emoji} \p{Emoji=Y} (1367) \p{Emoji: N*} (Single: \P{Emoji}) (1_112_745 plus all above-Unicode code points: [\x00-\x20! \"\$\%&\'\(\)+,\-.\/:;<=>?\@A-Z\[\\\] \^_`a-z\{\|\}~\x7f-\xa8\xaa-\xad\xaf- \xff], U+0100..203B, U+203D..2048, U+204A..2121, U+2123..2138, U+213A..2193 ...) \p{Emoji: Y*} (Single: \p{Emoji}) (1367: [#*0-9\xa9 \xae], U+203C, U+2049, U+2122, U+2139, U+2194..2199 ...) \p{Emoji_Component} \p{Emoji_Component=Y} (Short: \p{EComp}) (146) \p{Emoji_Component: N*} (Short: \p{EComp=N}, \P{EComp}) (1_113_966 plus all above-Unicode code points: [\x00-\x20!\"\$\%&\'\(\)+,\-.\/:;<=>? \@A-Z\[\\\]\^_`a-z\{\|\}~\x7f-\xff], U+0100..200C, U+200E..20E2, U+20E4..FE0E, U+FE10..1F1E5, U+1F200..1F3FA ...) \p{Emoji_Component: Y*} (Short: \p{EComp=Y}, \p{EComp}) (146: [#*0-9], U+200D, U+20E3, U+FE0F, U+1F1E6..1F1FF, U+1F3FB..1F3FF ...) \p{Emoji_Modifier} \p{Emoji_Modifier=Y} (Short: \p{EMod}) (5) \p{Emoji_Modifier: N*} (Short: \p{EMod=N}, \P{EMod}) (1_114_107 plus all above-Unicode code points: U+0000..1F3FA, U+1F400..infinity) \p{Emoji_Modifier: Y*} (Short: \p{EMod=Y}, \p{EMod}) (5: U+1F3FB..1F3FF) \p{Emoji_Modifier_Base} \p{Emoji_Modifier_Base=Y} (Short: \p{EBase}) (122) \p{Emoji_Modifier_Base: N*} (Short: \p{EBase=N}, \P{EBase}) (1_113_990 plus all above-Unicode code points: U+0000..261C, U+261E..26F8, U+26FA..2709, U+270E..1F384, U+1F386..1F3C1, U+1F3C5..1F3C6 ...) \p{Emoji_Modifier_Base: Y*} (Short: \p{EBase=Y}, \p{EBase}) (122: U+261D, U+26F9, U+270A..270D, U+1F385, U+1F3C2..1F3C4, U+1F3C7 ...) \p{Emoji_Presentation} \p{Emoji_Presentation=Y} (Short: \p{EPres}) (1148) \p{Emoji_Presentation: N*} (Short: \p{EPres=N}, \P{EPres}) (1_112_964 plus all above-Unicode code points: U+0000..2319, U+231C..23E8, U+23ED..23EF, U+23F1..23F2, U+23F4..25FC, U+25FF..2613 ...) \p{Emoji_Presentation: Y*} (Short: \p{EPres=Y}, \p{EPres}) (1148: U+231A..231B, U+23E9..23EC, U+23F0, U+23F3, U+25FD..25FE, U+2614..2615 ...) X \p{Emoticons} \p{Block=Emoticons} (80) X \p{Enclosed_Alphanum} \p{Enclosed_Alphanumerics} (= \p{Block= Enclosed_Alphanumerics}) (160) X \p{Enclosed_Alphanum_Sup} \p{Enclosed_Alphanumeric_Supplement} (= \p{Block= Enclosed_Alphanumeric_Supplement}) (256) X \p{Enclosed_Alphanumeric_Supplement} \p{Block= Enclosed_Alphanumeric_Supplement} (Short: \p{InEnclosedAlphanumSup}) (256) X \p{Enclosed_Alphanumerics} \p{Block=Enclosed_Alphanumerics} (Short: \p{InEnclosedAlphanum}) (160) X \p{Enclosed_CJK} \p{Enclosed_CJK_Letters_And_Months} (= \p{Block= Enclosed_CJK_Letters_And_Months}) (256) X \p{Enclosed_CJK_Letters_And_Months} \p{Block= Enclosed_CJK_Letters_And_Months} (Short: \p{InEnclosedCJK}) (256) X \p{Enclosed_Ideographic_Sup} \p{Enclosed_Ideographic_Supplement} (= \p{Block= Enclosed_Ideographic_Supplement}) (256) X \p{Enclosed_Ideographic_Supplement} \p{Block= Enclosed_Ideographic_Supplement} (Short: \p{InEnclosedIdeographicSup}) (256) \p{Enclosing_Mark} \p{General_Category=Enclosing_Mark} (Short: \p{Me}) (13) \p{EPres} \p{Emoji_Presentation} (= \p{Emoji_Presentation=Y}) (1148) \p{EPres: *} \p{Emoji_Presentation: *} \p{Ethi} \p{Ethiopic} (= \p{Script_Extensions= Ethiopic}) (NOT \p{Block=Ethiopic}) (495) \p{Ethiopic} \p{Script_Extensions=Ethiopic} (Short: \p{Ethi}; NOT \p{Block=Ethiopic}) (495) X \p{Ethiopic_Ext} \p{Ethiopic_Extended} (= \p{Block= Ethiopic_Extended}) (96) X \p{Ethiopic_Ext_A} \p{Ethiopic_Extended_A} (= \p{Block= Ethiopic_Extended_A}) (48) X \p{Ethiopic_Extended} \p{Block=Ethiopic_Extended} (Short: \p{InEthiopicExt}) (96) X \p{Ethiopic_Extended_A} \p{Block=Ethiopic_Extended_A} (Short: \p{InEthiopicExtA}) (48) X \p{Ethiopic_Sup} \p{Ethiopic_Supplement} (= \p{Block= Ethiopic_Supplement}) (32) X \p{Ethiopic_Supplement} \p{Block=Ethiopic_Supplement} (Short: \p{InEthiopicSup}) (32) \p{Ext} \p{Extender} (= \p{Extender=Y}) (48) \p{Ext: *} \p{Extender: *} \p{Extended_Pictographic} \p{Extended_Pictographic=Y} (Short: \p{ExtPict}) (3537) \p{Extended_Pictographic: N*} (Short: \p{ExtPict=N}, \P{ExtPict}) (1_110_575 plus all above-Unicode code points: [\x00-\xa8\xaa-\xad\xaf-\xff], U+0100..203B, U+203D..2048, U+204A..2121, U+2123..2138, U+213A..2193 ...) \p{Extended_Pictographic: Y*} (Short: \p{ExtPict=Y}, \p{ExtPict}) (3537: [\xa9\xae], U+203C, U+2049, U+2122, U+2139, U+2194..2199 ...) \p{Extender} \p{Extender=Y} (Short: \p{Ext}) (48) \p{Extender: N*} (Short: \p{Ext=N}, \P{Ext}) (1_114_064 plus all above-Unicode code points: [\x00-\xb6\xb8-\xff], U+0100..02CF, U+02D2..063F, U+0641..07F9, U+07FB..0B54, U+0B56..0E45 ...) \p{Extender: Y*} (Short: \p{Ext=Y}, \p{Ext}) (48: [\xb7], U+02D0..02D1, U+0640, U+07FA, U+0B55, U+0E46 ...) \p{ExtPict} \p{Extended_Pictographic} (= \p{Extended_Pictographic=Y}) (3537) \p{ExtPict: *} \p{Extended_Pictographic: *} \p{Final_Punctuation} \p{General_Category=Final_Punctuation} (Short: \p{Pf}) (10) \p{Format} \p{General_Category=Format} (Short: \p{Cf}) (161) \p{Full_Composition_Exclusion} \p{Full_Composition_Exclusion=Y} (Short: \p{CompEx}) (1120) \p{Full_Composition_Exclusion: N*} (Short: \p{CompEx=N}, \P{CompEx}) (1_112_992 plus all above- Unicode code points: U+0000..033F, U+0342, U+0345..0373, U+0375..037D, U+037F..0386, U+0388..0957 ...) \p{Full_Composition_Exclusion: Y*} (Short: \p{CompEx=Y}, \p{CompEx}) (1120: U+0340..0341, U+0343..0344, U+0374, U+037E, U+0387, U+0958..095F ...) \p{Gc: *} \p{General_Category: *} \p{GCB: *} \p{Grapheme_Cluster_Break: *} \p{General_Category: C} \p{General_Category=Other} (970_414 plus all above-Unicode code points) \p{General_Category: Cased_Letter} [\p{Ll}\p{Lu}\p{Lt}] (Short: \p{Gc=LC}, \p{LC}) (3977: [A-Za-z\xb5 \xc0-\xd6\xd8-\xf6\xf8-\xff], U+0100..01BA, U+01BC..01BF, U+01C4..0293, U+0295..02AF, U+0370..0373 ...) \p{General_Category: Cc} \p{General_Category=Control} (65) \p{General_Category: Cf} \p{General_Category=Format} (161) \p{General_Category: Close_Punctuation} (Short: \p{Gc=Pe}, \p{Pe}) (73: [\)\]\}], U+0F3B, U+0F3D, U+169C, U+2046, U+207E ...) \p{General_Category: Cn} \p{General_Category=Unassigned} (830_672 plus all above-Unicode code points) \p{General_Category: Cntrl} \p{General_Category=Control} (65) \p{General_Category: Co} \p{General_Category=Private_Use} (137_468) \p{General_Category: Combining_Mark} \p{General_Category=Mark} (2295) \p{General_Category: Connector_Punctuation} (Short: \p{Gc=Pc}, \p{Pc}) (10: [_], U+203F..2040, U+2054, U+FE33..FE34, U+FE4D..FE4F, U+FF3F) \p{General_Category: Control} (Short: \p{Gc=Cc}, \p{Cc}) (65: [\x00-\x1f\x7f-\x9f]) \p{General_Category: Cs} \p{General_Category=Surrogate} (2048) \p{General_Category: Currency_Symbol} (Short: \p{Gc=Sc}, \p{Sc}) (62: [\$\xa2-\xa5], U+058F, U+060B, U+07FE..07FF, U+09F2..09F3, U+09FB ...) \p{General_Category: Dash_Punctuation} (Short: \p{Gc=Pd}, \p{Pd}) (25: [\-], U+058A, U+05BE, U+1400, U+1806, U+2010..2015 ...) \p{General_Category: Decimal_Number} (Short: \p{Gc=Nd}, \p{Nd}) (650: [0-9], U+0660..0669, U+06F0..06F9, U+07C0..07C9, U+0966..096F, U+09E6..09EF ...) \p{General_Category: Digit} \p{General_Category=Decimal_Number} (650) \p{General_Category: Enclosing_Mark} (Short: \p{Gc=Me}, \p{Me}) (13: U+0488..0489, U+1ABE, U+20DD..20E0, U+20E2..20E4, U+A670..A672) \p{General_Category: Final_Punctuation} (Short: \p{Gc=Pf}, \p{Pf}) (10: [\xbb], U+2019, U+201D, U+203A, U+2E03, U+2E05 ...) \p{General_Category: Format} (Short: \p{Gc=Cf}, \p{Cf}) (161: [\xad], U+0600..0605, U+061C, U+06DD, U+070F, U+08E2 ...) \p{General_Category: Initial_Punctuation} (Short: \p{Gc=Pi}, \p{Pi}) (12: [\xab], U+2018, U+201B..201C, U+201F, U+2039, U+2E02 ...) \p{General_Category: L} \p{General_Category=Letter} (131_241) X \p{General_Category: L&} \p{General_Category=Cased_Letter} (3977) X \p{General_Category: L_} \p{General_Category=Cased_Letter} Note the trailing '_' matters in spite of loose matching rules. (3977) \p{General_Category: LC} \p{General_Category=Cased_Letter} (3977) \p{General_Category: Letter} (Short: \p{Gc=L}, \p{L}) (131_241: [A-Za-z\xaa\xb5\xba\xc0-\xd6\xd8-\xf6 \xf8-\xff], U+0100..02C1, U+02C6..02D1, U+02E0..02E4, U+02EC, U+02EE ...) \p{General_Category: Letter_Number} (Short: \p{Gc=Nl}, \p{Nl}) (236: U+16EE..16F0, U+2160..2182, U+2185..2188, U+3007, U+3021..3029, U+3038..303A ...) \p{General_Category: Line_Separator} (Short: \p{Gc=Zl}, \p{Zl}) (1: U+2028) \p{General_Category: Ll} \p{General_Category=Lowercase_Letter} (/i= General_Category=Cased_Letter) (2155) \p{General_Category: Lm} \p{General_Category=Modifier_Letter} (260) \p{General_Category: Lo} \p{General_Category=Other_Letter} (127_004) \p{General_Category: Lowercase_Letter} (Short: \p{Gc=Ll}, \p{Ll}; /i= General_Category=Cased_Letter) (2155: [a-z\xb5\xdf-\xf6\xf8-\xff], U+0101, U+0103, U+0105, U+0107, U+0109 ...) \p{General_Category: Lt} \p{General_Category=Titlecase_Letter} (/i= General_Category=Cased_Letter) (31) \p{General_Category: Lu} \p{General_Category=Uppercase_Letter} (/i= General_Category=Cased_Letter) (1791) \p{General_Category: M} \p{General_Category=Mark} (2295) \p{General_Category: Mark} (Short: \p{Gc=M}, \p{M}) (2295: U+0300..036F, U+0483..0489, U+0591..05BD, U+05BF, U+05C1..05C2, U+05C4..05C5 ...) \p{General_Category: Math_Symbol} (Short: \p{Gc=Sm}, \p{Sm}) (948: [+<=>\|~\xac\xb1\xd7\xf7], U+03F6, U+0606..0608, U+2044, U+2052, U+207A..207C ...) \p{General_Category: Mc} \p{General_Category=Spacing_Mark} (443) \p{General_Category: Me} \p{General_Category=Enclosing_Mark} (13) \p{General_Category: Mn} \p{General_Category=Nonspacing_Mark} (1839) \p{General_Category: Modifier_Letter} (Short: \p{Gc=Lm}, \p{Lm}) (260: U+02B0..02C1, U+02C6..02D1, U+02E0..02E4, U+02EC, U+02EE, U+0374 ...) \p{General_Category: Modifier_Symbol} (Short: \p{Gc=Sk}, \p{Sk}) (123: [\^`\xa8\xaf\xb4\xb8], U+02C2..02C5, U+02D2..02DF, U+02E5..02EB, U+02ED, U+02EF..02FF ...) \p{General_Category: N} \p{General_Category=Number} (1781) \p{General_Category: Nd} \p{General_Category=Decimal_Number} (650) \p{General_Category: Nl} \p{General_Category=Letter_Number} (236) \p{General_Category: No} \p{General_Category=Other_Number} (895) \p{General_Category: Nonspacing_Mark} (Short: \p{Gc=Mn}, \p{Mn}) (1839: U+0300..036F, U+0483..0487, U+0591..05BD, U+05BF, U+05C1..05C2, U+05C4..05C5 ...) \p{General_Category: Number} (Short: \p{Gc=N}, \p{N}) (1781: [0-9 \xb2-\xb3\xb9\xbc-\xbe], U+0660..0669, U+06F0..06F9, U+07C0..07C9, U+0966..096F, U+09E6..09EF ...) \p{General_Category: Open_Punctuation} (Short: \p{Gc=Ps}, \p{Ps}) (75: [\(\[\{], U+0F3A, U+0F3C, U+169B, U+201A, U+201E ...) \p{General_Category: Other} (Short: \p{Gc=C}, \p{C}) (970_414 plus all above-Unicode code points: [\x00- \x1f\x7f-\x9f\xad], U+0378..0379, U+0380..0383, U+038B, U+038D, U+03A2 ...) \p{General_Category: Other_Letter} (Short: \p{Gc=Lo}, \p{Lo}) (127_004: [\xaa\xba], U+01BB, U+01C0..01C3, U+0294, U+05D0..05EA, U+05EF..05F2 ...) \p{General_Category: Other_Number} (Short: \p{Gc=No}, \p{No}) (895: [\xb2-\xb3\xb9\xbc-\xbe], U+09F4..09F9, U+0B72..0B77, U+0BF0..0BF2, U+0C78..0C7E, U+0D58..0D5E ...) \p{General_Category: Other_Punctuation} (Short: \p{Gc=Po}, \p{Po}) (593: [!\"#\%&\'*,.\/:;?\@\\\xa1\xa7 \xb6-\xb7\xbf], U+037E, U+0387, U+055A..055F, U+0589, U+05C0 ...) \p{General_Category: Other_Symbol} (Short: \p{Gc=So}, \p{So}) (6431: [\xa6\xa9\xae\xb0], U+0482, U+058D..058E, U+060E..060F, U+06DE, U+06E9 ...) \p{General_Category: P} \p{General_Category=Punctuation} (798) \p{General_Category: Paragraph_Separator} (Short: \p{Gc=Zp}, \p{Zp}) (1: U+2029) \p{General_Category: Pc} \p{General_Category= Connector_Punctuation} (10) \p{General_Category: Pd} \p{General_Category=Dash_Punctuation} (25) \p{General_Category: Pe} \p{General_Category=Close_Punctuation} (73) \p{General_Category: Pf} \p{General_Category=Final_Punctuation} (10) \p{General_Category: Pi} \p{General_Category=Initial_Punctuation} (12) \p{General_Category: Po} \p{General_Category=Other_Punctuation} (593) \p{General_Category: Private_Use} (Short: \p{Gc=Co}, \p{Co}) (137_468: U+E000..F8FF, U+F0000..FFFFD, U+100000..10FFFD) \p{General_Category: Ps} \p{General_Category=Open_Punctuation} (75) \p{General_Category: Punct} \p{General_Category=Punctuation} (798) \p{General_Category: Punctuation} (Short: \p{Gc=P}, \p{P}) (798: [!\"#\%&\'\(\)*,\-.\/:;?\@\[\\\]_\{\} \xa1\xa7\xab\xb6-\xb7\xbb\xbf], U+037E, U+0387, U+055A..055F, U+0589..058A, U+05BE ...) \p{General_Category: S} \p{General_Category=Symbol} (7564) \p{General_Category: Sc} \p{General_Category=Currency_Symbol} (62) \p{General_Category: Separator} (Short: \p{Gc=Z}, \p{Z}) (19: [\x20\xa0], U+1680, U+2000..200A, U+2028..2029, U+202F, U+205F ...) \p{General_Category: Sk} \p{General_Category=Modifier_Symbol} (123) \p{General_Category: Sm} \p{General_Category=Math_Symbol} (948) \p{General_Category: So} \p{General_Category=Other_Symbol} (6431) \p{General_Category: Space_Separator} (Short: \p{Gc=Zs}, \p{Zs}) (17: [\x20\xa0], U+1680, U+2000..200A, U+202F, U+205F, U+3000) \p{General_Category: Spacing_Mark} (Short: \p{Gc=Mc}, \p{Mc}) (443: U+0903, U+093B, U+093E..0940, U+0949..094C, U+094E..094F, U+0982..0983 ...) \p{General_Category: Surrogate} (Short: \p{Gc=Cs}, \p{Cs}) (2048: U+D800..DFFF) \p{General_Category: Symbol} (Short: \p{Gc=S}, \p{S}) (7564: [\$+<=>\^`\|~\xa2-\xa6\xa8-\xa9\xac\xae- \xb1\xb4\xb8\xd7\xf7], U+02C2..02C5, U+02D2..02DF, U+02E5..02EB, U+02ED, U+02EF..02FF ...) \p{General_Category: Titlecase_Letter} (Short: \p{Gc=Lt}, \p{Lt}; /i= General_Category=Cased_Letter) (31: U+01C5, U+01C8, U+01CB, U+01F2, U+1F88..1F8F, U+1F98..1F9F ...) \p{General_Category: Unassigned} (Short: \p{Gc=Cn}, \p{Cn}) (830_672 plus all above-Unicode code points: U+0378..0379, U+0380..0383, U+038B, U+038D, U+03A2, U+0530 ...) \p{General_Category: Uppercase_Letter} (Short: \p{Gc=Lu}, \p{Lu}; /i= General_Category=Cased_Letter) (1791: [A-Z\xc0-\xd6\xd8-\xde], U+0100, U+0102, U+0104, U+0106, U+0108 ...) \p{General_Category: Z} \p{General_Category=Separator} (19) \p{General_Category: Zl} \p{General_Category=Line_Separator} (1) \p{General_Category: Zp} \p{General_Category=Paragraph_Separator} (1) \p{General_Category: Zs} \p{General_Category=Space_Separator} (17) X \p{General_Punctuation} \p{Block=General_Punctuation} (Short: \p{InPunctuation}) (112) X \p{Geometric_Shapes} \p{Block=Geometric_Shapes} (96) X \p{Geometric_Shapes_Ext} \p{Geometric_Shapes_Extended} (= \p{Block=Geometric_Shapes_Extended}) (128) X \p{Geometric_Shapes_Extended} \p{Block=Geometric_Shapes_Extended} (Short: \p{InGeometricShapesExt}) (128) \p{Geor} \p{Georgian} (= \p{Script_Extensions= Georgian}) (NOT \p{Block=Georgian}) (174) \p{Georgian} \p{Script_Extensions=Georgian} (Short: \p{Geor}; NOT \p{Block=Georgian}) (174) X \p{Georgian_Ext} \p{Georgian_Extended} (= \p{Block= Georgian_Extended}) (48) X \p{Georgian_Extended} \p{Block=Georgian_Extended} (Short: \p{InGeorgianExt}) (48) X \p{Georgian_Sup} \p{Georgian_Supplement} (= \p{Block= Georgian_Supplement}) (48) X \p{Georgian_Supplement} \p{Block=Georgian_Supplement} (Short: \p{InGeorgianSup}) (48) \p{Glag} \p{Glagolitic} (= \p{Script_Extensions= Glagolitic}) (NOT \p{Block=Glagolitic}) (136) \p{Glagolitic} \p{Script_Extensions=Glagolitic} (Short: \p{Glag}; NOT \p{Block=Glagolitic}) (136) X \p{Glagolitic_Sup} \p{Glagolitic_Supplement} (= \p{Block= Glagolitic_Supplement}) (48) X \p{Glagolitic_Supplement} \p{Block=Glagolitic_Supplement} (Short: \p{InGlagoliticSup}) (48) \p{Gong} \p{Gunjala_Gondi} (= \p{Script_Extensions= Gunjala_Gondi}) (NOT \p{Block= Gunjala_Gondi}) (65) \p{Gonm} \p{Masaram_Gondi} (= \p{Script_Extensions= Masaram_Gondi}) (NOT \p{Block= Masaram_Gondi}) (77) \p{Goth} \p{Gothic} (= \p{Script_Extensions= Gothic}) (NOT \p{Block=Gothic}) (27) \p{Gothic} \p{Script_Extensions=Gothic} (Short: \p{Goth}; NOT \p{Block=Gothic}) (27) \p{Gr_Base} \p{Grapheme_Base} (= \p{Grapheme_Base=Y}) (141_814) \p{Gr_Base: *} \p{Grapheme_Base: *} \p{Gr_Ext} \p{Grapheme_Extend} (= \p{Grapheme_Extend= Y}) (1979) \p{Gr_Ext: *} \p{Grapheme_Extend: *} \p{Gran} \p{Grantha} (= \p{Script_Extensions= Grantha}) (NOT \p{Block=Grantha}) (116) \p{Grantha} \p{Script_Extensions=Grantha} (Short: \p{Gran}; NOT \p{Block=Grantha}) (116) \p{Graph} \p{XPosixGraph} (281_308) \p{Grapheme_Base} \p{Grapheme_Base=Y} (Short: \p{GrBase}) (141_814) \p{Grapheme_Base: N*} (Short: \p{GrBase=N}, \P{GrBase}) (972_298 plus all above-Unicode code points: [\x00-\x1f\x7f-\x9f\xad], U+0300..036F, U+0378..0379, U+0380..0383, U+038B, U+038D ...) \p{Grapheme_Base: Y*} (Short: \p{GrBase=Y}, \p{GrBase}) (141_814: [\x20-\x7e\xa0-\xac\xae-\xff], U+0100..02FF, U+0370..0377, U+037A..037F, U+0384..038A, U+038C ...) \p{Grapheme_Cluster_Break: CN} \p{Grapheme_Cluster_Break=Control} (3886) \p{Grapheme_Cluster_Break: Control} (Short: \p{GCB=CN}) (3886: [^ \n\r\x20-\x7e\xa0-\xac\xae-\xff], U+061C, U+180E, U+200B, U+200E..200F, U+2028..202E ...) \p{Grapheme_Cluster_Break: CR} (Short: \p{GCB=CR}) (1: [\r]) \p{Grapheme_Cluster_Break: E_Base} (Short: \p{GCB=EB}) (0) \p{Grapheme_Cluster_Break: E_Base_GAZ} (Short: \p{GCB=EBG}) (0) \p{Grapheme_Cluster_Break: E_Modifier} (Short: \p{GCB=EM}) (0) \p{Grapheme_Cluster_Break: EB} \p{Grapheme_Cluster_Break=E_Base} (0) \p{Grapheme_Cluster_Break: EBG} \p{Grapheme_Cluster_Break= E_Base_GAZ} (0) \p{Grapheme_Cluster_Break: EM} \p{Grapheme_Cluster_Break= E_Modifier} (0) \p{Grapheme_Cluster_Break: EX} \p{Grapheme_Cluster_Break=Extend} (1984) \p{Grapheme_Cluster_Break: Extend} (Short: \p{GCB=EX}) (1984: U+0300..036F, U+0483..0489, U+0591..05BD, U+05BF, U+05C1..05C2, U+05C4..05C5 ...) \p{Grapheme_Cluster_Break: GAZ} \p{Grapheme_Cluster_Break= Glue_After_Zwj} (0) \p{Grapheme_Cluster_Break: Glue_After_Zwj} (Short: \p{GCB=GAZ}) (0) \p{Grapheme_Cluster_Break: L} (Short: \p{GCB=L}) (125: U+1100..115F, U+A960..A97C) \p{Grapheme_Cluster_Break: LF} (Short: \p{GCB=LF}) (1: [\n]) \p{Grapheme_Cluster_Break: LV} (Short: \p{GCB=LV}) (399: U+AC00, U+AC1C, U+AC38, U+AC54, U+AC70, U+AC8C ...) \p{Grapheme_Cluster_Break: LVT} (Short: \p{GCB=LVT}) (10_773: U+AC01..AC1B, U+AC1D..AC37, U+AC39..AC53, U+AC55..AC6F, U+AC71..AC8B, U+AC8D..ACA7 ...) \p{Grapheme_Cluster_Break: Other} (Short: \p{GCB=XX}) (1_096_272 plus all above-Unicode code points: [\x20-\x7e\xa0-\xac\xae-\xff], U+0100..02FF, U+0370..0482, U+048A..0590, U+05BE, U+05C0 ...) \p{Grapheme_Cluster_Break: PP} \p{Grapheme_Cluster_Break=Prepend} (24) \p{Grapheme_Cluster_Break: Prepend} (Short: \p{GCB=PP}) (24: U+0600..0605, U+06DD, U+070F, U+08E2, U+0D4E, U+110BD ...) \p{Grapheme_Cluster_Break: Regional_Indicator} (Short: \p{GCB=RI}) (26: U+1F1E6..1F1FF) \p{Grapheme_Cluster_Break: RI} \p{Grapheme_Cluster_Break= Regional_Indicator} (26) \p{Grapheme_Cluster_Break: SM} \p{Grapheme_Cluster_Break= SpacingMark} (388) \p{Grapheme_Cluster_Break: SpacingMark} (Short: \p{GCB=SM}) (388: U+0903, U+093B, U+093E..0940, U+0949..094C, U+094E..094F, U+0982..0983 ...) \p{Grapheme_Cluster_Break: T} (Short: \p{GCB=T}) (137: U+11A8..11FF, U+D7CB..D7FB) \p{Grapheme_Cluster_Break: V} (Short: \p{GCB=V}) (95: U+1160..11A7, U+D7B0..D7C6) \p{Grapheme_Cluster_Break: XX} \p{Grapheme_Cluster_Break=Other} (1_096_272 plus all above-Unicode code points) \p{Grapheme_Cluster_Break: ZWJ} (Short: \p{GCB=ZWJ}) (1: U+200D) \p{Grapheme_Extend} \p{Grapheme_Extend=Y} (Short: \p{GrExt}) (1979) \p{Grapheme_Extend: N*} (Short: \p{GrExt=N}, \P{GrExt}) (1_112_133 plus all above-Unicode code points: U+0000..02FF, U+0370..0482, U+048A..0590, U+05BE, U+05C0, U+05C3 ...) \p{Grapheme_Extend: Y*} (Short: \p{GrExt=Y}, \p{GrExt}) (1979: U+0300..036F, U+0483..0489, U+0591..05BD, U+05BF, U+05C1..05C2, U+05C4..05C5 ...) \p{Greek} \p{Script_Extensions=Greek} (Short: \p{Grek}; NOT \p{Greek_And_Coptic}) (522) X \p{Greek_And_Coptic} \p{Block=Greek_And_Coptic} (Short: \p{InGreek}) (144) X \p{Greek_Ext} \p{Greek_Extended} (= \p{Block= Greek_Extended}) (256) X \p{Greek_Extended} \p{Block=Greek_Extended} (Short: \p{InGreekExt}) (256) \p{Grek} \p{Greek} (= \p{Script_Extensions=Greek}) (NOT \p{Greek_And_Coptic}) (522) \p{Gujarati} \p{Script_Extensions=Gujarati} (Short: \p{Gujr}; NOT \p{Block=Gujarati}) (105) \p{Gujr} \p{Gujarati} (= \p{Script_Extensions= Gujarati}) (NOT \p{Block=Gujarati}) (105) \p{Gunjala_Gondi} \p{Script_Extensions=Gunjala_Gondi} (Short: \p{Gong}; NOT \p{Block= Gunjala_Gondi}) (65) \p{Gurmukhi} \p{Script_Extensions=Gurmukhi} (Short: \p{Guru}; NOT \p{Block=Gurmukhi}) (94) \p{Guru} \p{Gurmukhi} (= \p{Script_Extensions= Gurmukhi}) (NOT \p{Block=Gurmukhi}) (94) X \p{Half_And_Full_Forms} \p{Halfwidth_And_Fullwidth_Forms} (= \p{Block=Halfwidth_And_Fullwidth_Forms}) (240) X \p{Half_Marks} \p{Combining_Half_Marks} (= \p{Block= Combining_Half_Marks}) (16) X \p{Halfwidth_And_Fullwidth_Forms} \p{Block= Halfwidth_And_Fullwidth_Forms} (Short: \p{InHalfAndFullForms}) (240) \p{Han} \p{Script_Extensions=Han} (94_492) \p{Hang} \p{Hangul} (= \p{Script_Extensions= Hangul}) (NOT \p{Hangul_Syllables}) (11_775) \p{Hangul} \p{Script_Extensions=Hangul} (Short: \p{Hang}; NOT \p{Hangul_Syllables}) (11_775) X \p{Hangul_Compatibility_Jamo} \p{Block=Hangul_Compatibility_Jamo} (Short: \p{InCompatJamo}) (96) X \p{Hangul_Jamo} \p{Block=Hangul_Jamo} (Short: \p{InJamo}) (256) X \p{Hangul_Jamo_Extended_A} \p{Block=Hangul_Jamo_Extended_A} (Short: \p{InJamoExtA}) (32) X \p{Hangul_Jamo_Extended_B} \p{Block=Hangul_Jamo_Extended_B} (Short: \p{InJamoExtB}) (80) \p{Hangul_Syllable_Type: L} \p{Hangul_Syllable_Type=Leading_Jamo} (125) \p{Hangul_Syllable_Type: Leading_Jamo} (Short: \p{Hst=L}) (125: U+1100..115F, U+A960..A97C) \p{Hangul_Syllable_Type: LV} \p{Hangul_Syllable_Type=LV_Syllable} (399) \p{Hangul_Syllable_Type: LV_Syllable} (Short: \p{Hst=LV}) (399: U+AC00, U+AC1C, U+AC38, U+AC54, U+AC70, U+AC8C ...) \p{Hangul_Syllable_Type: LVT} \p{Hangul_Syllable_Type= LVT_Syllable} (10_773) \p{Hangul_Syllable_Type: LVT_Syllable} (Short: \p{Hst=LVT}) (10_773: U+AC01..AC1B, U+AC1D..AC37, U+AC39..AC53, U+AC55..AC6F, U+AC71..AC8B, U+AC8D..ACA7 ...) \p{Hangul_Syllable_Type: NA} \p{Hangul_Syllable_Type= Not_Applicable} (1_102_583 plus all above-Unicode code points) \p{Hangul_Syllable_Type: Not_Applicable} (Short: \p{Hst=NA}) (1_102_583 plus all above-Unicode code points: U+0000..10FF, U+1200..A95F, U+A97D..ABFF, U+D7A4..D7AF, U+D7C7..D7CA, U+D7FC..infinity) \p{Hangul_Syllable_Type: T} \p{Hangul_Syllable_Type=Trailing_Jamo} (137) \p{Hangul_Syllable_Type: Trailing_Jamo} (Short: \p{Hst=T}) (137: U+11A8..11FF, U+D7CB..D7FB) \p{Hangul_Syllable_Type: V} \p{Hangul_Syllable_Type=Vowel_Jamo} (95) \p{Hangul_Syllable_Type: Vowel_Jamo} (Short: \p{Hst=V}) (95: U+1160..11A7, U+D7B0..D7C6) X \p{Hangul_Syllables} \p{Block=Hangul_Syllables} (Short: \p{InHangul}) (11_184) \p{Hani} \p{Han} (= \p{Script_Extensions=Han}) (94_492) \p{Hanifi_Rohingya} \p{Script_Extensions=Hanifi_Rohingya} (Short: \p{Rohg}; NOT \p{Block= Hanifi_Rohingya}) (55) \p{Hano} \p{Hanunoo} (= \p{Script_Extensions= Hanunoo}) (NOT \p{Block=Hanunoo}) (23) \p{Hanunoo} \p{Script_Extensions=Hanunoo} (Short: \p{Hano}; NOT \p{Block=Hanunoo}) (23) \p{Hatr} \p{Hatran} (= \p{Script_Extensions= Hatran}) (NOT \p{Block=Hatran}) (26) \p{Hatran} \p{Script_Extensions=Hatran} (Short: \p{Hatr}; NOT \p{Block=Hatran}) (26) \p{Hebr} \p{Hebrew} (= \p{Script_Extensions= Hebrew}) (NOT \p{Block=Hebrew}) (134) \p{Hebrew} \p{Script_Extensions=Hebrew} (Short: \p{Hebr}; NOT \p{Block=Hebrew}) (134) \p{Hex} \p{XPosixXDigit} (= \p{Hex_Digit=Y}) (44) \p{Hex: *} \p{Hex_Digit: *} \p{Hex_Digit} \p{XPosixXDigit} (= \p{Hex_Digit=Y}) (44) \p{Hex_Digit: N*} (Short: \p{Hex=N}, \P{Hex}) (1_114_068 plus all above-Unicode code points: [\x00-\x20!\"#\$\%&\'\(\)*+,\-.\/:;<=>? \@G-Z\[\\\]\^_`g-z\{\|\}~\x7f-\xff], U+0100..FF0F, U+FF1A..FF20, U+FF27..FF40, U+FF47..infinity) \p{Hex_Digit: Y*} (Short: \p{Hex=Y}, \p{Hex}) (44: [0-9A-Fa- f], U+FF10..FF19, U+FF21..FF26, U+FF41..FF46) X \p{High_Private_Use_Surrogates} \p{Block= High_Private_Use_Surrogates} (Short: \p{InHighPUSurrogates}) (128) X \p{High_PU_Surrogates} \p{High_Private_Use_Surrogates} (= \p{Block=High_Private_Use_Surrogates}) (128) X \p{High_Surrogates} \p{Block=High_Surrogates} (896) \p{Hira} \p{Hiragana} (= \p{Script_Extensions= Hiragana}) (NOT \p{Block=Hiragana}) (431) \p{Hiragana} \p{Script_Extensions=Hiragana} (Short: \p{Hira}; NOT \p{Block=Hiragana}) (431) \p{Hluw} \p{Anatolian_Hieroglyphs} (= \p{Script_Extensions= Anatolian_Hieroglyphs}) (NOT \p{Block= Anatolian_Hieroglyphs}) (583) \p{Hmng} \p{Pahawh_Hmong} (= \p{Script_Extensions= Pahawh_Hmong}) (NOT \p{Block= Pahawh_Hmong}) (127) \p{Hmnp} \p{Nyiakeng_Puachue_Hmong} (= \p{Script_Extensions= Nyiakeng_Puachue_Hmong}) (NOT \p{Block= Nyiakeng_Puachue_Hmong}) (71) \p{HorizSpace} \p{XPosixBlank} (18) \p{Hst: *} \p{Hangul_Syllable_Type: *} \p{Hung} \p{Old_Hungarian} (= \p{Script_Extensions= Old_Hungarian}) (NOT \p{Block= Old_Hungarian}) (108) D \p{Hyphen} \p{Hyphen=Y} (11) D \p{Hyphen: N*} Supplanted by Line_Break property values; see www.unicode.org/reports/tr14 (Single: \P{Hyphen}) (1_114_101 plus all above-Unicode code points: [\x00-\x20! \"#\$\%&\'\(\)*+,.\/0-9:;<=>?\@A-Z \[\\\]\^_`a-z\{\|\}~\x7f-\xac\xae-\xff], U+0100..0589, U+058B..1805, U+1807..200F, U+2012..2E16, U+2E18..30FA ...) D \p{Hyphen: Y*} Supplanted by Line_Break property values; see www.unicode.org/reports/tr14 (Single: \p{Hyphen}) (11: [\-\xad], U+058A, U+1806, U+2010..2011, U+2E17, U+30FB ...) \p{ID_Continue} \p{ID_Continue=Y} (Short: \p{IDC}; NOT \p{Ideographic_Description_Characters}) (134_434) \p{ID_Continue: N*} (Short: \p{IDC=N}, \P{IDC}) (979_678 plus all above-Unicode code points: [\x00- \x20!\"#\$\%&\'\(\)*+,\-.\/:;<=>?\@ \[\\\]\^`\{\|\}~\x7f-\xa9\xab-\xb4\xb6 \xb8-\xb9\xbb-\xbf\xd7\xf7], U+02C2..02C5, U+02D2..02DF, U+02E5..02EB, U+02ED, U+02EF..02FF ...) \p{ID_Continue: Y*} (Short: \p{IDC=Y}, \p{IDC}) (134_434: [0-9A-Z_a-z\xaa\xb5\xb7\xba\xc0-\xd6 \xd8-\xf6\xf8-\xff], U+0100..02C1, U+02C6..02D1, U+02E0..02E4, U+02EC, U+02EE ...) \p{ID_Start} \p{ID_Start=Y} (Short: \p{IDS}) (131_482) \p{ID_Start: N*} (Short: \p{IDS=N}, \P{IDS}) (982_630 plus all above-Unicode code points: [\x00- \x20!\"#\$\%&\'\(\)*+,\-.\/0-9:;<=>?\@ \[\\\]\^_`\{\|\}~\x7f-\xa9\xab-\xb4\xb6- \xb9\xbb-\xbf\xd7\xf7], U+02C2..02C5, U+02D2..02DF, U+02E5..02EB, U+02ED, U+02EF..036F ...) \p{ID_Start: Y*} (Short: \p{IDS=Y}, \p{IDS}) (131_482: [A- Za-z\xaa\xb5\xba\xc0-\xd6\xd8-\xf6\xf8- \xff], U+0100..02C1, U+02C6..02D1, U+02E0..02E4, U+02EC, U+02EE ...) \p{IDC} \p{ID_Continue} (= \p{ID_Continue=Y}) (NOT \p{Ideographic_Description_Characters}) (134_434) \p{IDC: *} \p{ID_Continue: *} \p{Identifier_Status: Allowed} (107_835: [\'\-.0-9:A-Z_a-z\xb7 \xc0-\xd6\xd8-\xf6\xf8-\xff], U+0100..0131, U+0134..013E, U+0141..0148, U+014A..017E, U+018F ...) \p{Identifier_Status: Restricted} (1_006_277 plus all above- Unicode code points: [\x00-\x20!\"#\$ \%&\(\)*+,\/;<=>?\@\[\\\]\^`\{\|\}~\x7f- \xb6\xb8-\xbf\xd7\xf7], U+0132..0133, U+013F..0140, U+0149, U+017F..018E, U+0190..019F ...) \p{Identifier_Type: Default_Ignorable} (395: [\xad], U+034F, U+061C, U+115F..1160, U+17B4..17B5, U+180B..180E ...) \p{Identifier_Type: Deprecated} (15: U+0149, U+0673, U+0F77, U+0F79, U+17A3..17A4, U+206A..206F ...) \p{Identifier_Type: Exclusion} (16_745: U+03E2..03EF, U+0800..082D, U+0830..083E, U+1680..169C, U+16A0..16EA, U+16EE..16F8 ...) \p{Identifier_Type: Inclusion} (19: [\'\-.:\xb7], U+0375, U+058A, U+05F3..05F4, U+06FD..06FE, U+0F0B ...) \p{Identifier_Type: Limited_Use} (5248: U+0700..070D, U+070F..074A, U+074D..074F, U+07C0..07FA, U+07FD..07FF, U+0840..085B ...) \p{Identifier_Type: Not_Character} (970_247 plus all above-Unicode code points: [^\t\n\cK\f\r\x20-\x7e\x85 \xa0-\xff], U+0378..0379, U+0380..0383, U+038B, U+038D, U+03A2 ...) \p{Identifier_Type: Not_NFKC} (4800: [\xa0\xa8\xaa\xaf\xb2-\xb5 \xb8-\xba\xbc-\xbe], U+0132..0133, U+013F..0140, U+017F, U+01C4..01CC, U+01F1..01F3 ...) \p{Identifier_Type: Not_XID} (7998: [\t\n\cK\f\r\x20!\"#\$\%& \(\)*+,\/;<=>?\@\[\\\]\^`\{\|\}~\x85 \xa1-\xa7\xa9\xab-\xac\xae\xb0-\xb1\xb6 \xbb\xbf\xd7\xf7], U+02C2..02C5, U+02D2..02D7, U+02DE..02DF, U+02E5..02EB, U+02ED ...) \p{Identifier_Type: Obsolete} (1611: U+018D, U+01AA..01AB, U+01B9..01BB, U+01BE..01BF, U+01F6..01F7, U+021C..021D ...) \p{Identifier_Type: Recommended} (107_816: [0-9A-Z_a-z\xc0-\xd6 \xd8-\xf6\xf8-\xff], U+0100..0131, U+0134..013E, U+0141..0148, U+014A..017E, U+018F ...) \p{Identifier_Type: Technical} (1463: U+0180, U+018D, U+01AA..01AB, U+01BA..01BB, U+01BE, U+01C0..01C3 ...) \p{Identifier_Type: Uncommon_Use} (348: U+0181..018C, U+018E, U+0190..019F, U+01A2..01A9, U+01AC..01AE, U+01B1..01B8 ...) \p{Ideo} \p{Ideographic} (= \p{Ideographic=Y}) (101_652) \p{Ideo: *} \p{Ideographic: *} \p{Ideographic} \p{Ideographic=Y} (Short: \p{Ideo}) (101_652) \p{Ideographic: N*} (Short: \p{Ideo=N}, \P{Ideo}) (1_012_460 plus all above-Unicode code points: U+0000..3005, U+3008..3020, U+302A..3037, U+303B..33FF, U+4DC0..4DFF, U+9FFD..F8FF ...) \p{Ideographic: Y*} (Short: \p{Ideo=Y}, \p{Ideo}) (101_652: U+3006..3007, U+3021..3029, U+3038..303A, U+3400..4DBF, U+4E00..9FFC, U+F900..FA6D ...) X \p{Ideographic_Description_Characters} \p{Block= Ideographic_Description_Characters} (Short: \p{InIDC}) (16) X \p{Ideographic_Symbols} \p{Ideographic_Symbols_And_Punctuation} (= \p{Block= Ideographic_Symbols_And_Punctuation}) (32) X \p{Ideographic_Symbols_And_Punctuation} \p{Block= Ideographic_Symbols_And_Punctuation} (Short: \p{InIdeographicSymbols}) (32) \p{IDS} \p{ID_Start} (= \p{ID_Start=Y}) (131_482) \p{IDS: *} \p{ID_Start: *} \p{IDS_Binary_Operator} \p{IDS_Binary_Operator=Y} (Short: \p{IDSB}) (10) \p{IDS_Binary_Operator: N*} (Short: \p{IDSB=N}, \P{IDSB}) (1_114_102 plus all above-Unicode code points: U+0000..2FEF, U+2FF2..2FF3, U+2FFC..infinity) \p{IDS_Binary_Operator: Y*} (Short: \p{IDSB=Y}, \p{IDSB}) (10: U+2FF0..2FF1, U+2FF4..2FFB) \p{IDS_Trinary_Operator} \p{IDS_Trinary_Operator=Y} (Short: \p{IDST}) (2) \p{IDS_Trinary_Operator: N*} (Short: \p{IDST=N}, \P{IDST}) (1_114_110 plus all above-Unicode code points: U+0000..2FF1, U+2FF4..infinity) \p{IDS_Trinary_Operator: Y*} (Short: \p{IDST=Y}, \p{IDST}) (2: U+2FF2..2FF3) \p{IDSB} \p{IDS_Binary_Operator} (= \p{IDS_Binary_Operator=Y}) (10) \p{IDSB: *} \p{IDS_Binary_Operator: *} \p{IDST} \p{IDS_Trinary_Operator} (= \p{IDS_Trinary_Operator=Y}) (2) \p{IDST: *} \p{IDS_Trinary_Operator: *} \p{Imperial_Aramaic} \p{Script_Extensions=Imperial_Aramaic} (Short: \p{Armi}; NOT \p{Block= Imperial_Aramaic}) (31) \p{In: *} \p{Present_In: *} (Perl extension) X \p{In_*} \p{Block: *} X \p{Indic_Number_Forms} \p{Common_Indic_Number_Forms} (= \p{Block= Common_Indic_Number_Forms}) (16) \p{Indic_Positional_Category: Bottom} (Short: \p{InPC=Bottom}) (351: U+093C, U+0941..0944, U+094D, U+0952, U+0956..0957, U+0962..0963 ...) \p{Indic_Positional_Category: Bottom_And_Left} (Short: \p{InPC= BottomAndLeft}) (1: U+A9BF) \p{Indic_Positional_Category: Bottom_And_Right} (Short: \p{InPC= BottomAndRight}) (4: U+1B3B, U+A9BE, U+A9C0, U+11942) \p{Indic_Positional_Category: Left} (Short: \p{InPC=Left}) (64: U+093F, U+094E, U+09BF, U+09C7..09C8, U+0A3F, U+0ABF ...) \p{Indic_Positional_Category: Left_And_Right} (Short: \p{InPC= LeftAndRight}) (22: U+09CB..09CC, U+0B4B, U+0BCA..0BCC, U+0D4A..0D4C, U+0DDC, U+0DDE ...) \p{Indic_Positional_Category: NA} (Short: \p{InPC=NA}) (1_112_902 plus all above-Unicode code points: U+0000..08FF, U+0904..0939, U+093D, U+0950, U+0958..0961, U+0964..0980 ...) \p{Indic_Positional_Category: Overstruck} (Short: \p{InPC= Overstruck}) (10: U+1CD4, U+1CE2..1CE8, U+10A01, U+10A06) \p{Indic_Positional_Category: Right} (Short: \p{InPC=Right}) (288: U+0903, U+093B, U+093E, U+0940, U+0949..094C, U+094F ...) \p{Indic_Positional_Category: Top} (Short: \p{InPC=Top}) (415: U+0900..0902, U+093A, U+0945..0948, U+0951, U+0953..0955, U+0981 ...) \p{Indic_Positional_Category: Top_And_Bottom} (Short: \p{InPC= TopAndBottom}) (10: U+0C48, U+0F73, U+0F76..0F79, U+0F81, U+1B3C, U+1112E..1112F) \p{Indic_Positional_Category: Top_And_Bottom_And_Left} (Short: \p{InPC=TopAndBottomAndLeft}) (2: U+103C, U+1171E) \p{Indic_Positional_Category: Top_And_Bottom_And_Right} (Short: \p{InPC=TopAndBottomAndRight}) (1: U+1B3D) \p{Indic_Positional_Category: Top_And_Left} (Short: \p{InPC= TopAndLeft}) (6: U+0B48, U+0DDA, U+17BE, U+1C29, U+114BB, U+115B9) \p{Indic_Positional_Category: Top_And_Left_And_Right} (Short: \p{InPC=TopAndLeftAndRight}) (4: U+0B4C, U+0DDD, U+17BF, U+115BB) \p{Indic_Positional_Category: Top_And_Right} (Short: \p{InPC= TopAndRight}) (13: U+0AC9, U+0B57, U+0CC0, U+0CC7..0CC8, U+0CCA..0CCB, U+1925..1926 ...) \p{Indic_Positional_Category: Visual_Order_Left} (Short: \p{InPC= VisualOrderLeft}) (19: U+0E40..0E44, U+0EC0..0EC4, U+19B5..19B7, U+19BA, U+AAB5..AAB6, U+AAB9 ...) X \p{Indic_Siyaq_Numbers} \p{Block=Indic_Siyaq_Numbers} (80) \p{Indic_Syllabic_Category: Avagraha} (Short: \p{InSC=Avagraha}) (17: U+093D, U+09BD, U+0ABD, U+0B3D, U+0C3D, U+0CBD ...) \p{Indic_Syllabic_Category: Bindu} (Short: \p{InSC=Bindu}) (91: U+0900..0902, U+0981..0982, U+09FC, U+0A01..0A02, U+0A70, U+0A81..0A82 ...) \p{Indic_Syllabic_Category: Brahmi_Joining_Number} (Short: \p{InSC=BrahmiJoiningNumber}) (20: U+11052..11065) \p{Indic_Syllabic_Category: Cantillation_Mark} (Short: \p{InSC= CantillationMark}) (59: U+0951..0952, U+0A51, U+0AFA..0AFC, U+1CD0..1CD2, U+1CD4..1CE1, U+1CF4 ...) \p{Indic_Syllabic_Category: Consonant} (Short: \p{InSC=Consonant}) (2195: U+0915..0939, U+0958..095F, U+0978..097F, U+0995..09A8, U+09AA..09B0, U+09B2 ...) \p{Indic_Syllabic_Category: Consonant_Dead} (Short: \p{InSC= ConsonantDead}) (12: U+09CE, U+0D54..0D56, U+0D7A..0D7F, U+1CF2..1CF3) \p{Indic_Syllabic_Category: Consonant_Final} (Short: \p{InSC= ConsonantFinal}) (67: U+1930..1931, U+1933..1939, U+19C1..19C7, U+1A58..1A59, U+1BBE..1BBF, U+1BF0..1BF1 ...) \p{Indic_Syllabic_Category: Consonant_Head_Letter} (Short: \p{InSC=ConsonantHeadLetter}) (5: U+0F88..0F8C) \p{Indic_Syllabic_Category: Consonant_Initial_Postfixed} (Short: \p{InSC=ConsonantInitialPostfixed}) (1: U+1A5A) \p{Indic_Syllabic_Category: Consonant_Killer} (Short: \p{InSC= ConsonantKiller}) (2: U+0E4C, U+17CD) \p{Indic_Syllabic_Category: Consonant_Medial} (Short: \p{InSC= ConsonantMedial}) (31: U+0A75, U+0EBC..0EBD, U+103B..103E, U+105E..1060, U+1082, U+1A55..1A56 ...) \p{Indic_Syllabic_Category: Consonant_Placeholder} (Short: \p{InSC=ConsonantPlaceholder}) (22: [\- \xa0\xd7], U+0980, U+0A72..0A73, U+104B, U+104E, U+1900 ...) \p{Indic_Syllabic_Category: Consonant_Preceding_Repha} (Short: \p{InSC=ConsonantPrecedingRepha}) (3: U+0D4E, U+11941, U+11D46) \p{Indic_Syllabic_Category: Consonant_Prefixed} (Short: \p{InSC= ConsonantPrefixed}) (10: U+111C2..111C3, U+1193F, U+11A3A, U+11A84..11A89) \p{Indic_Syllabic_Category: Consonant_Subjoined} (Short: \p{InSC= ConsonantSubjoined}) (94: U+0F8D..0F97, U+0F99..0FBC, U+1929..192B, U+1A57, U+1A5B..1A5E, U+1BA1..1BA3 ...) \p{Indic_Syllabic_Category: Consonant_Succeeding_Repha} (Short: \p{InSC=ConsonantSucceedingRepha}) (4: U+17CC, U+1B03, U+1B81, U+A982) \p{Indic_Syllabic_Category: Consonant_With_Stacker} (Short: \p{InSC=ConsonantWithStacker}) (8: U+0CF1..0CF2, U+1CF5..1CF6, U+11003..11004, U+11460..11461) \p{Indic_Syllabic_Category: Gemination_Mark} (Short: \p{InSC= GeminationMark}) (3: U+0A71, U+11237, U+11A98) \p{Indic_Syllabic_Category: Invisible_Stacker} (Short: \p{InSC= InvisibleStacker}) (12: U+1039, U+17D2, U+1A60, U+1BAB, U+AAF6, U+10A3F ...) \p{Indic_Syllabic_Category: Joiner} (Short: \p{InSC=Joiner}) (1: U+200D) \p{Indic_Syllabic_Category: Modifying_Letter} (Short: \p{InSC= ModifyingLetter}) (1: U+0B83) \p{Indic_Syllabic_Category: Non_Joiner} (Short: \p{InSC= NonJoiner}) (1: U+200C) \p{Indic_Syllabic_Category: Nukta} (Short: \p{InSC=Nukta}) (31: U+093C, U+09BC, U+0A3C, U+0ABC, U+0AFD..0AFF, U+0B3C ...) \p{Indic_Syllabic_Category: Number} (Short: \p{InSC=Number}) (491: [0-9], U+0966..096F, U+09E6..09EF, U+0A66..0A6F, U+0AE6..0AEF, U+0B66..0B6F ...) \p{Indic_Syllabic_Category: Number_Joiner} (Short: \p{InSC= NumberJoiner}) (1: U+1107F) \p{Indic_Syllabic_Category: Other} (Short: \p{InSC=Other}) (1_109_572 plus all above-Unicode code points: [\x00-\x20!\"#\$\%&\'\(\)*+,. \/:;<=>?\@A-Z\[\\\]\^_`a-z\{\|\}~\x7f- \x9f\xa1-\xb1\xb4-\xd6\xd8-\xff], U+0100..08FF, U+0950, U+0953..0954, U+0964..0965, U+0970..0971 ...) \p{Indic_Syllabic_Category: Pure_Killer} (Short: \p{InSC= PureKiller}) (23: U+0D3B..0D3C, U+0E3A, U+0E4E, U+0EBA, U+0F84, U+103A ...) \p{Indic_Syllabic_Category: Register_Shifter} (Short: \p{InSC= RegisterShifter}) (2: U+17C9..17CA) \p{Indic_Syllabic_Category: Syllable_Modifier} (Short: \p{InSC= SyllableModifier}) (25: [\xb2-\xb3], U+09FE, U+0F35, U+0F37, U+0FC6, U+17CB ...) \p{Indic_Syllabic_Category: Tone_Letter} (Short: \p{InSC= ToneLetter}) (7: U+1970..1974, U+AAC0, U+AAC2) \p{Indic_Syllabic_Category: Tone_Mark} (Short: \p{InSC=ToneMark}) (42: U+0E48..0E4B, U+0EC8..0ECB, U+1037, U+1063..1064, U+1069..106D, U+1087..108D ...) \p{Indic_Syllabic_Category: Virama} (Short: \p{InSC=Virama}) (27: U+094D, U+09CD, U+0A4D, U+0ACD, U+0B4D, U+0BCD ...) \p{Indic_Syllabic_Category: Visarga} (Short: \p{InSC=Visarga}) (35: U+0903, U+0983, U+0A03, U+0A83, U+0B03, U+0C03 ...) \p{Indic_Syllabic_Category: Vowel} (Short: \p{InSC=Vowel}) (30: U+1963..196D, U+A85E..A861, U+A866, U+A922..A92A, U+11150..11154) \p{Indic_Syllabic_Category: Vowel_Dependent} (Short: \p{InSC= VowelDependent}) (683: U+093A..093B, U+093E..094C, U+094E..094F, U+0955..0957, U+0962..0963, U+09BE..09C4 ...) \p{Indic_Syllabic_Category: Vowel_Independent} (Short: \p{InSC= VowelIndependent}) (484: U+0904..0914, U+0960..0961, U+0972..0977, U+0985..098C, U+098F..0990, U+0993..0994 ...) \p{Inherited} \p{Script_Extensions=Inherited} (Short: \p{Zinh}) (503) \p{Initial_Punctuation} \p{General_Category=Initial_Punctuation} (Short: \p{Pi}) (12) \p{InPC: *} \p{Indic_Positional_Category: *} \p{InSC: *} \p{Indic_Syllabic_Category: *} \p{Inscriptional_Pahlavi} \p{Script_Extensions= Inscriptional_Pahlavi} (Short: \p{Phli}; NOT \p{Block=Inscriptional_Pahlavi}) (27) \p{Inscriptional_Parthian} \p{Script_Extensions= Inscriptional_Parthian} (Short: \p{Prti}; NOT \p{Block= Inscriptional_Parthian}) (30) X \p{IPA_Ext} \p{IPA_Extensions} (= \p{Block= IPA_Extensions}) (96) X \p{IPA_Extensions} \p{Block=IPA_Extensions} (Short: \p{InIPAExt}) (96) \p{Is_*} \p{*} (Any exceptions are individually noted beginning with the word NOT.) If an entry has flag(s) at its beginning, like "D", the "Is_" form has the same flag(s) \p{Ital} \p{Old_Italic} (= \p{Script_Extensions= Old_Italic}) (NOT \p{Block=Old_Italic}) (39) X \p{Jamo} \p{Hangul_Jamo} (= \p{Block=Hangul_Jamo}) (256) X \p{Jamo_Ext_A} \p{Hangul_Jamo_Extended_A} (= \p{Block= Hangul_Jamo_Extended_A}) (32) X \p{Jamo_Ext_B} \p{Hangul_Jamo_Extended_B} (= \p{Block= Hangul_Jamo_Extended_B}) (80) \p{Java} \p{Javanese} (= \p{Script_Extensions= Javanese}) (NOT \p{Block=Javanese}) (91) \p{Javanese} \p{Script_Extensions=Javanese} (Short: \p{Java}; NOT \p{Block=Javanese}) (91) \p{Jg: *} \p{Joining_Group: *} \p{Join_C} \p{Join_Control} (= \p{Join_Control=Y}) (2) \p{Join_C: *} \p{Join_Control: *} \p{Join_Control} \p{Join_Control=Y} (Short: \p{JoinC}) (2) \p{Join_Control: N*} (Short: \p{JoinC=N}, \P{JoinC}) (1_114_110 plus all above-Unicode code points: U+0000..200B, U+200E..infinity) \p{Join_Control: Y*} (Short: \p{JoinC=Y}, \p{JoinC}) (2: U+200C..200D) \p{Joining_Group: African_Feh} (Short: \p{Jg=AfricanFeh}) (1: U+08BB) \p{Joining_Group: African_Noon} (Short: \p{Jg=AfricanNoon}) (1: U+08BD) \p{Joining_Group: African_Qaf} (Short: \p{Jg=AfricanQaf}) (2: U+08BC, U+08C4) \p{Joining_Group: Ain} (Short: \p{Jg=Ain}) (9: U+0639..063A, U+06A0, U+06FC, U+075D..075F, U+08B3, U+08C3) \p{Joining_Group: Alaph} (Short: \p{Jg=Alaph}) (1: U+0710) \p{Joining_Group: Alef} (Short: \p{Jg=Alef}) (10: U+0622..0623, U+0625, U+0627, U+0671..0673, U+0675, U+0773..0774) \p{Joining_Group: Beh} (Short: \p{Jg=Beh}) (27: U+0628, U+062A..062B, U+066E, U+0679..0680, U+0750..0756, U+08A0..08A1 ...) \p{Joining_Group: Beth} (Short: \p{Jg=Beth}) (2: U+0712, U+072D) \p{Joining_Group: Burushaski_Yeh_Barree} (Short: \p{Jg= BurushaskiYehBarree}) (2: U+077A..077B) \p{Joining_Group: Dal} (Short: \p{Jg=Dal}) (15: U+062F..0630, U+0688..0690, U+06EE, U+0759..075A, U+08AE) \p{Joining_Group: Dalath_Rish} (Short: \p{Jg=DalathRish}) (4: U+0715..0716, U+072A, U+072F) \p{Joining_Group: E} (Short: \p{Jg=E}) (1: U+0725) \p{Joining_Group: Farsi_Yeh} (Short: \p{Jg=FarsiYeh}) (7: U+063D..063F, U+06CC, U+06CE, U+0775..0776) \p{Joining_Group: Fe} (Short: \p{Jg=Fe}) (1: U+074F) \p{Joining_Group: Feh} (Short: \p{Jg=Feh}) (10: U+0641, U+06A1..06A6, U+0760..0761, U+08A4) \p{Joining_Group: Final_Semkath} (Short: \p{Jg=FinalSemkath}) (1: U+0724) \p{Joining_Group: Gaf} (Short: \p{Jg=Gaf}) (15: U+063B..063C, U+06A9, U+06AB, U+06AF..06B4, U+0762..0764, U+08B0 ...) \p{Joining_Group: Gamal} (Short: \p{Jg=Gamal}) (3: U+0713..0714, U+072E) \p{Joining_Group: Hah} (Short: \p{Jg=Hah}) (21: U+062C..062E, U+0681..0687, U+06BF, U+0757..0758, U+076E..076F, U+0772 ...) \p{Joining_Group: Hamza_On_Heh_Goal} (Short: \p{Jg= HamzaOnHehGoal}) (1: U+06C3) \p{Joining_Group: Hanifi_Rohingya_Kinna_Ya} (Short: \p{Jg= HanifiRohingyaKinnaYa}) (4: U+10D19, U+10D1E, U+10D20, U+10D23) \p{Joining_Group: Hanifi_Rohingya_Pa} (Short: \p{Jg= HanifiRohingyaPa}) (3: U+10D02, U+10D09, U+10D1C) \p{Joining_Group: He} (Short: \p{Jg=He}) (1: U+0717) \p{Joining_Group: Heh} (Short: \p{Jg=Heh}) (1: U+0647) \p{Joining_Group: Heh_Goal} (Short: \p{Jg=HehGoal}) (2: U+06C1..06C2) \p{Joining_Group: Heth} (Short: \p{Jg=Heth}) (1: U+071A) \p{Joining_Group: Kaf} (Short: \p{Jg=Kaf}) (6: U+0643, U+06AC..06AE, U+077F, U+08B4) \p{Joining_Group: Kaph} (Short: \p{Jg=Kaph}) (1: U+071F) \p{Joining_Group: Khaph} (Short: \p{Jg=Khaph}) (1: U+074E) \p{Joining_Group: Knotted_Heh} (Short: \p{Jg=KnottedHeh}) (2: U+06BE, U+06FF) \p{Joining_Group: Lam} (Short: \p{Jg=Lam}) (8: U+0644, U+06B5..06B8, U+076A, U+08A6, U+08C7) \p{Joining_Group: Lamadh} (Short: \p{Jg=Lamadh}) (1: U+0720) \p{Joining_Group: Malayalam_Bha} (Short: \p{Jg=MalayalamBha}) (1: U+0866) \p{Joining_Group: Malayalam_Ja} (Short: \p{Jg=MalayalamJa}) (1: U+0861) \p{Joining_Group: Malayalam_Lla} (Short: \p{Jg=MalayalamLla}) (1: U+0868) \p{Joining_Group: Malayalam_Llla} (Short: \p{Jg=MalayalamLlla}) (1: U+0869) \p{Joining_Group: Malayalam_Nga} (Short: \p{Jg=MalayalamNga}) (1: U+0860) \p{Joining_Group: Malayalam_Nna} (Short: \p{Jg=MalayalamNna}) (1: U+0864) \p{Joining_Group: Malayalam_Nnna} (Short: \p{Jg=MalayalamNnna}) (1: U+0865) \p{Joining_Group: Malayalam_Nya} (Short: \p{Jg=MalayalamNya}) (1: U+0862) \p{Joining_Group: Malayalam_Ra} (Short: \p{Jg=MalayalamRa}) (1: U+0867) \p{Joining_Group: Malayalam_Ssa} (Short: \p{Jg=MalayalamSsa}) (1: U+086A) \p{Joining_Group: Malayalam_Tta} (Short: \p{Jg=MalayalamTta}) (1: U+0863) \p{Joining_Group: Manichaean_Aleph} (Short: \p{Jg= ManichaeanAleph}) (1: U+10AC0) \p{Joining_Group: Manichaean_Ayin} (Short: \p{Jg=ManichaeanAyin}) (2: U+10AD9..10ADA) \p{Joining_Group: Manichaean_Beth} (Short: \p{Jg=ManichaeanBeth}) (2: U+10AC1..10AC2) \p{Joining_Group: Manichaean_Daleth} (Short: \p{Jg= ManichaeanDaleth}) (1: U+10AC5) \p{Joining_Group: Manichaean_Dhamedh} (Short: \p{Jg= ManichaeanDhamedh}) (1: U+10AD4) \p{Joining_Group: Manichaean_Five} (Short: \p{Jg=ManichaeanFive}) (1: U+10AEC) \p{Joining_Group: Manichaean_Gimel} (Short: \p{Jg= ManichaeanGimel}) (2: U+10AC3..10AC4) \p{Joining_Group: Manichaean_Heth} (Short: \p{Jg=ManichaeanHeth}) (1: U+10ACD) \p{Joining_Group: Manichaean_Hundred} (Short: \p{Jg= ManichaeanHundred}) (1: U+10AEF) \p{Joining_Group: Manichaean_Kaph} (Short: \p{Jg=ManichaeanKaph}) (3: U+10AD0..10AD2) \p{Joining_Group: Manichaean_Lamedh} (Short: \p{Jg= ManichaeanLamedh}) (1: U+10AD3) \p{Joining_Group: Manichaean_Mem} (Short: \p{Jg=ManichaeanMem}) (1: U+10AD6) \p{Joining_Group: Manichaean_Nun} (Short: \p{Jg=ManichaeanNun}) (1: U+10AD7) \p{Joining_Group: Manichaean_One} (Short: \p{Jg=ManichaeanOne}) (1: U+10AEB) \p{Joining_Group: Manichaean_Pe} (Short: \p{Jg=ManichaeanPe}) (2: U+10ADB..10ADC) \p{Joining_Group: Manichaean_Qoph} (Short: \p{Jg=ManichaeanQoph}) (3: U+10ADE..10AE0) \p{Joining_Group: Manichaean_Resh} (Short: \p{Jg=ManichaeanResh}) (1: U+10AE1) \p{Joining_Group: Manichaean_Sadhe} (Short: \p{Jg= ManichaeanSadhe}) (1: U+10ADD) \p{Joining_Group: Manichaean_Samekh} (Short: \p{Jg= ManichaeanSamekh}) (1: U+10AD8) \p{Joining_Group: Manichaean_Taw} (Short: \p{Jg=ManichaeanTaw}) (1: U+10AE4) \p{Joining_Group: Manichaean_Ten} (Short: \p{Jg=ManichaeanTen}) (1: U+10AED) \p{Joining_Group: Manichaean_Teth} (Short: \p{Jg=ManichaeanTeth}) (1: U+10ACE) \p{Joining_Group: Manichaean_Thamedh} (Short: \p{Jg= ManichaeanThamedh}) (1: U+10AD5) \p{Joining_Group: Manichaean_Twenty} (Short: \p{Jg= ManichaeanTwenty}) (1: U+10AEE) \p{Joining_Group: Manichaean_Waw} (Short: \p{Jg=ManichaeanWaw}) (1: U+10AC7) \p{Joining_Group: Manichaean_Yodh} (Short: \p{Jg=ManichaeanYodh}) (1: U+10ACF) \p{Joining_Group: Manichaean_Zayin} (Short: \p{Jg= ManichaeanZayin}) (2: U+10AC9..10ACA) \p{Joining_Group: Meem} (Short: \p{Jg=Meem}) (4: U+0645, U+0765..0766, U+08A7) \p{Joining_Group: Mim} (Short: \p{Jg=Mim}) (1: U+0721) \p{Joining_Group: No_Joining_Group} (Short: \p{Jg=NoJoiningGroup}) (1_113_790 plus all above-Unicode code points: U+0000..061F, U+0621, U+0640, U+064B..066D, U+0670, U+0674 ...) \p{Joining_Group: Noon} (Short: \p{Jg=Noon}) (8: U+0646, U+06B9..06BC, U+0767..0769) \p{Joining_Group: Nun} (Short: \p{Jg=Nun}) (1: U+0722) \p{Joining_Group: Nya} (Short: \p{Jg=Nya}) (1: U+06BD) \p{Joining_Group: Pe} (Short: \p{Jg=Pe}) (1: U+0726) \p{Joining_Group: Qaf} (Short: \p{Jg=Qaf}) (5: U+0642, U+066F, U+06A7..06A8, U+08A5) \p{Joining_Group: Qaph} (Short: \p{Jg=Qaph}) (1: U+0729) \p{Joining_Group: Reh} (Short: \p{Jg=Reh}) (19: U+0631..0632, U+0691..0699, U+06EF, U+075B, U+076B..076C, U+0771 ...) \p{Joining_Group: Reversed_Pe} (Short: \p{Jg=ReversedPe}) (1: U+0727) \p{Joining_Group: Rohingya_Yeh} (Short: \p{Jg=RohingyaYeh}) (1: U+08AC) \p{Joining_Group: Sad} (Short: \p{Jg=Sad}) (6: U+0635..0636, U+069D..069E, U+06FB, U+08AF) \p{Joining_Group: Sadhe} (Short: \p{Jg=Sadhe}) (1: U+0728) \p{Joining_Group: Seen} (Short: \p{Jg=Seen}) (11: U+0633..0634, U+069A..069C, U+06FA, U+075C, U+076D, U+0770 ...) \p{Joining_Group: Semkath} (Short: \p{Jg=Semkath}) (1: U+0723) \p{Joining_Group: Shin} (Short: \p{Jg=Shin}) (1: U+072B) \p{Joining_Group: Straight_Waw} (Short: \p{Jg=StraightWaw}) (1: U+08B1) \p{Joining_Group: Swash_Kaf} (Short: \p{Jg=SwashKaf}) (1: U+06AA) \p{Joining_Group: Syriac_Waw} (Short: \p{Jg=SyriacWaw}) (1: U+0718) \p{Joining_Group: Tah} (Short: \p{Jg=Tah}) (4: U+0637..0638, U+069F, U+08A3) \p{Joining_Group: Taw} (Short: \p{Jg=Taw}) (1: U+072C) \p{Joining_Group: Teh_Marbuta} (Short: \p{Jg=TehMarbuta}) (3: U+0629, U+06C0, U+06D5) \p{Joining_Group: Teh_Marbuta_Goal} \p{Joining_Group= Hamza_On_Heh_Goal} (1) \p{Joining_Group: Teth} (Short: \p{Jg=Teth}) (2: U+071B..071C) \p{Joining_Group: Waw} (Short: \p{Jg=Waw}) (16: U+0624, U+0648, U+0676..0677, U+06C4..06CB, U+06CF, U+0778..0779 ...) \p{Joining_Group: Yeh} (Short: \p{Jg=Yeh}) (11: U+0620, U+0626, U+0649..064A, U+0678, U+06D0..06D1, U+0777 ...) \p{Joining_Group: Yeh_Barree} (Short: \p{Jg=YehBarree}) (2: U+06D2..06D3) \p{Joining_Group: Yeh_With_Tail} (Short: \p{Jg=YehWithTail}) (1: U+06CD) \p{Joining_Group: Yudh} (Short: \p{Jg=Yudh}) (1: U+071D) \p{Joining_Group: Yudh_He} (Short: \p{Jg=YudhHe}) (1: U+071E) \p{Joining_Group: Zain} (Short: \p{Jg=Zain}) (1: U+0719) \p{Joining_Group: Zhain} (Short: \p{Jg=Zhain}) (1: U+074D) \p{Joining_Type: C} \p{Joining_Type=Join_Causing} (4) \p{Joining_Type: D} \p{Joining_Type=Dual_Joining} (586) \p{Joining_Type: Dual_Joining} (Short: \p{Jt=D}) (586: U+0620, U+0626, U+0628, U+062A..062E, U+0633..063F, U+0641..0647 ...) \p{Joining_Type: Join_Causing} (Short: \p{Jt=C}) (4: U+0640, U+07FA, U+180A, U+200D) \p{Joining_Type: L} \p{Joining_Type=Left_Joining} (5) \p{Joining_Type: Left_Joining} (Short: \p{Jt=L}) (5: U+A872, U+10ACD, U+10AD7, U+10D00, U+10FCB) \p{Joining_Type: Non_Joining} (Short: \p{Jt=U}) (1_111_390 plus all above-Unicode code points: [\x00- \xac\xae-\xff], U+0100..02FF, U+0370..0482, U+048A..0590, U+05BE, U+05C0 ...) \p{Joining_Type: R} \p{Joining_Type=Right_Joining} (130) \p{Joining_Type: Right_Joining} (Short: \p{Jt=R}) (130: U+0622..0625, U+0627, U+0629, U+062F..0632, U+0648, U+0671..0673 ...) \p{Joining_Type: T} \p{Joining_Type=Transparent} (1997) \p{Joining_Type: Transparent} (Short: \p{Jt=T}) (1997: [\xad], U+0300..036F, U+0483..0489, U+0591..05BD, U+05BF, U+05C1..05C2 ...) \p{Joining_Type: U} \p{Joining_Type=Non_Joining} (1_111_390 plus all above-Unicode code points) \p{Jt: *} \p{Joining_Type: *} \p{Kaithi} \p{Script_Extensions=Kaithi} (Short: \p{Kthi}; NOT \p{Block=Kaithi}) (87) \p{Kali} \p{Kayah_Li} (= \p{Script_Extensions= Kayah_Li}) (48) \p{Kana} \p{Katakana} (= \p{Script_Extensions= Katakana}) (NOT \p{Block=Katakana}) (356) X \p{Kana_Ext_A} \p{Kana_Extended_A} (= \p{Block= Kana_Extended_A}) (48) X \p{Kana_Extended_A} \p{Block=Kana_Extended_A} (Short: \p{InKanaExtA}) (48) X \p{Kana_Sup} \p{Kana_Supplement} (= \p{Block= Kana_Supplement}) (256) X \p{Kana_Supplement} \p{Block=Kana_Supplement} (Short: \p{InKanaSup}) (256) X \p{Kanbun} \p{Block=Kanbun} (16) X \p{Kangxi} \p{Kangxi_Radicals} (= \p{Block= Kangxi_Radicals}) (224) X \p{Kangxi_Radicals} \p{Block=Kangxi_Radicals} (Short: \p{InKangxi}) (224) \p{Kannada} \p{Script_Extensions=Kannada} (Short: \p{Knda}; NOT \p{Block=Kannada}) (104) \p{Katakana} \p{Script_Extensions=Katakana} (Short: \p{Kana}; NOT \p{Block=Katakana}) (356) X \p{Katakana_Ext} \p{Katakana_Phonetic_Extensions} (= \p{Block=Katakana_Phonetic_Extensions}) (16) X \p{Katakana_Phonetic_Extensions} \p{Block= Katakana_Phonetic_Extensions} (Short: \p{InKatakanaExt}) (16) \p{Kayah_Li} \p{Script_Extensions=Kayah_Li} (Short: \p{Kali}) (48) \p{Khar} \p{Kharoshthi} (= \p{Script_Extensions= Kharoshthi}) (NOT \p{Block=Kharoshthi}) (68) \p{Kharoshthi} \p{Script_Extensions=Kharoshthi} (Short: \p{Khar}; NOT \p{Block=Kharoshthi}) (68) \p{Khitan_Small_Script} \p{Script_Extensions=Khitan_Small_Script} (Short: \p{Kits}; NOT \p{Block= Khitan_Small_Script}) (471) \p{Khmer} \p{Script_Extensions=Khmer} (Short: \p{Khmr}; NOT \p{Block=Khmer}) (146) X \p{Khmer_Symbols} \p{Block=Khmer_Symbols} (32) \p{Khmr} \p{Khmer} (= \p{Script_Extensions=Khmer}) (NOT \p{Block=Khmer}) (146) \p{Khoj} \p{Khojki} (= \p{Script_Extensions= Khojki}) (NOT \p{Block=Khojki}) (82) \p{Khojki} \p{Script_Extensions=Khojki} (Short: \p{Khoj}; NOT \p{Block=Khojki}) (82) \p{Khudawadi} \p{Script_Extensions=Khudawadi} (Short: \p{Sind}; NOT \p{Block=Khudawadi}) (81) \p{Kits} \p{Khitan_Small_Script} (= \p{Script_Extensions= Khitan_Small_Script}) (NOT \p{Block= Khitan_Small_Script}) (471) \p{Knda} \p{Kannada} (= \p{Script_Extensions= Kannada}) (NOT \p{Block=Kannada}) (104) \p{Kthi} \p{Kaithi} (= \p{Script_Extensions= Kaithi}) (NOT \p{Block=Kaithi}) (87) \p{L} \pL \p{Letter} (= \p{General_Category=Letter}) (131_241) X \p{L&} \p{Cased_Letter} (= \p{General_Category= Cased_Letter}) (3977) X \p{L_} \p{Cased_Letter} (= \p{General_Category= Cased_Letter}) Note the trailing '_' matters in spite of loose matching rules. (3977) \p{Lana} \p{Tai_Tham} (= \p{Script_Extensions= Tai_Tham}) (NOT \p{Block=Tai_Tham}) (127) \p{Lao} \p{Script_Extensions=Lao} (NOT \p{Block= Lao}) (82) \p{Laoo} \p{Lao} (= \p{Script_Extensions=Lao}) (NOT \p{Block=Lao}) (82) \p{Latin} \p{Script_Extensions=Latin} (Short: \p{Latn}) (1403) X \p{Latin_1} \p{Latin_1_Supplement} (= \p{Block= Latin_1_Supplement}) (128) X \p{Latin_1_Sup} \p{Latin_1_Supplement} (= \p{Block= Latin_1_Supplement}) (128) X \p{Latin_1_Supplement} \p{Block=Latin_1_Supplement} (Short: \p{InLatin1}) (128) X \p{Latin_Ext_A} \p{Latin_Extended_A} (= \p{Block= Latin_Extended_A}) (128) X \p{Latin_Ext_Additional} \p{Latin_Extended_Additional} (= \p{Block=Latin_Extended_Additional}) (256) X \p{Latin_Ext_B} \p{Latin_Extended_B} (= \p{Block= Latin_Extended_B}) (208) X \p{Latin_Ext_C} \p{Latin_Extended_C} (= \p{Block= Latin_Extended_C}) (32) X \p{Latin_Ext_D} \p{Latin_Extended_D} (= \p{Block= Latin_Extended_D}) (224) X \p{Latin_Ext_E} \p{Latin_Extended_E} (= \p{Block= Latin_Extended_E}) (64) X \p{Latin_Extended_A} \p{Block=Latin_Extended_A} (Short: \p{InLatinExtA}) (128) X \p{Latin_Extended_Additional} \p{Block=Latin_Extended_Additional} (Short: \p{InLatinExtAdditional}) (256) X \p{Latin_Extended_B} \p{Block=Latin_Extended_B} (Short: \p{InLatinExtB}) (208) X \p{Latin_Extended_C} \p{Block=Latin_Extended_C} (Short: \p{InLatinExtC}) (32) X \p{Latin_Extended_D} \p{Block=Latin_Extended_D} (Short: \p{InLatinExtD}) (224) X \p{Latin_Extended_E} \p{Block=Latin_Extended_E} (Short: \p{InLatinExtE}) (64) \p{Latn} \p{Latin} (= \p{Script_Extensions=Latin}) (1403) \p{Lb: *} \p{Line_Break: *} \p{LC} \p{Cased_Letter} (= \p{General_Category= Cased_Letter}) (3977) \p{Lepc} \p{Lepcha} (= \p{Script_Extensions= Lepcha}) (NOT \p{Block=Lepcha}) (74) \p{Lepcha} \p{Script_Extensions=Lepcha} (Short: \p{Lepc}; NOT \p{Block=Lepcha}) (74) \p{Letter} \p{General_Category=Letter} (Short: \p{L}) (131_241) \p{Letter_Number} \p{General_Category=Letter_Number} (Short: \p{Nl}) (236) X \p{Letterlike_Symbols} \p{Block=Letterlike_Symbols} (80) \p{Limb} \p{Limbu} (= \p{Script_Extensions=Limbu}) (NOT \p{Block=Limbu}) (69) \p{Limbu} \p{Script_Extensions=Limbu} (Short: \p{Limb}; NOT \p{Block=Limbu}) (69) \p{Lina} \p{Linear_A} (= \p{Script_Extensions= Linear_A}) (NOT \p{Block=Linear_A}) (386) \p{Linb} \p{Linear_B} (= \p{Script_Extensions= Linear_B}) (268) \p{Line_Break: AI} \p{Line_Break=Ambiguous} (707) \p{Line_Break: AL} \p{Line_Break=Alphabetic} (21_400) \p{Line_Break: Alphabetic} (Short: \p{Lb=AL}) (21_400: [#&*<=>\@A- Z\^_`a-z~\xa6\xa9\xac\xae-\xaf\xb5\xc0- \xd6\xd8-\xf6\xf8-\xff], U+0100..02C6, U+02CE..02CF, U+02D1..02D7, U+02DC, U+02DE ...) \p{Line_Break: Ambiguous} (Short: \p{Lb=AI}) (707: [\xa7-\xa8\xaa \xb2-\xb3\xb6-\xba\xbc-\xbe\xd7\xf7], U+02C7, U+02C9..02CB, U+02CD, U+02D0, U+02D8..02DB ...) \p{Line_Break: B2} \p{Line_Break=Break_Both} (3) \p{Line_Break: BA} \p{Line_Break=Break_After} (244) \p{Line_Break: BB} \p{Line_Break=Break_Before} (45) \p{Line_Break: BK} \p{Line_Break=Mandatory_Break} (4) \p{Line_Break: Break_After} (Short: \p{Lb=BA}) (244: [\t\|\xad], U+058A, U+05BE, U+0964..0965, U+0E5A..0E5B, U+0F0B ...) \p{Line_Break: Break_Before} (Short: \p{Lb=BB}) (45: [\xb4], U+02C8, U+02CC, U+02DF, U+0C77, U+0C84 ...) \p{Line_Break: Break_Both} (Short: \p{Lb=B2}) (3: U+2014, U+2E3A..2E3B) \p{Line_Break: Break_Symbols} (Short: \p{Lb=SY}) (1: [\/]) \p{Line_Break: Carriage_Return} (Short: \p{Lb=CR}) (1: [\r]) \p{Line_Break: CB} \p{Line_Break=Contingent_Break} (1) \p{Line_Break: CJ} \p{Line_Break= Conditional_Japanese_Starter} (58) \p{Line_Break: CL} \p{Line_Break=Close_Punctuation} (91) \p{Line_Break: Close_Parenthesis} (Short: \p{Lb=CP}) (2: [\)\]]) \p{Line_Break: Close_Punctuation} (Short: \p{Lb=CL}) (91: [\}], U+0F3B, U+0F3D, U+169C, U+2046, U+207E ...) \p{Line_Break: CM} \p{Line_Break=Combining_Mark} (2286) \p{Line_Break: Combining_Mark} (Short: \p{Lb=CM}) (2286: [^\t\n \cK\f\r\x20-\x7e\x85\xa0-\xff], U+0300..034E, U+0350..035B, U+0363..036F, U+0483..0489, U+0591..05BD ...) \p{Line_Break: Complex_Context} (Short: \p{Lb=SA}) (750: U+0E01..0E3A, U+0E40..0E4E, U+0E81..0E82, U+0E84, U+0E86..0E8A, U+0E8C..0EA3 ...) \p{Line_Break: Conditional_Japanese_Starter} (Short: \p{Lb=CJ}) (58: U+3041, U+3043, U+3045, U+3047, U+3049, U+3063 ...) \p{Line_Break: Contingent_Break} (Short: \p{Lb=CB}) (1: U+FFFC) \p{Line_Break: CP} \p{Line_Break=Close_Parenthesis} (2) \p{Line_Break: CR} \p{Line_Break=Carriage_Return} (1) \p{Line_Break: E_Base} (Short: \p{Lb=EB}) (122: U+261D, U+26F9, U+270A..270D, U+1F385, U+1F3C2..1F3C4, U+1F3C7 ...) \p{Line_Break: E_Modifier} (Short: \p{Lb=EM}) (5: U+1F3FB..1F3FF) \p{Line_Break: EB} \p{Line_Break=E_Base} (122) \p{Line_Break: EM} \p{Line_Break=E_Modifier} (5) \p{Line_Break: EX} \p{Line_Break=Exclamation} (37) \p{Line_Break: Exclamation} (Short: \p{Lb=EX}) (37: [!?], U+05C6, U+061B, U+061E..061F, U+06D4, U+07F9 ...) \p{Line_Break: GL} \p{Line_Break=Glue} (26) \p{Line_Break: Glue} (Short: \p{Lb=GL}) (26: [\xa0], U+034F, U+035C..0362, U+0F08, U+0F0C, U+0F12 ...) \p{Line_Break: H2} (Short: \p{Lb=H2}) (399: U+AC00, U+AC1C, U+AC38, U+AC54, U+AC70, U+AC8C ...) \p{Line_Break: H3} (Short: \p{Lb=H3}) (10_773: U+AC01..AC1B, U+AC1D..AC37, U+AC39..AC53, U+AC55..AC6F, U+AC71..AC8B, U+AC8D..ACA7 ...) \p{Line_Break: Hebrew_Letter} (Short: \p{Lb=HL}) (75: U+05D0..05EA, U+05EF..05F2, U+FB1D, U+FB1F..FB28, U+FB2A..FB36, U+FB38..FB3C ...) \p{Line_Break: HL} \p{Line_Break=Hebrew_Letter} (75) \p{Line_Break: HY} \p{Line_Break=Hyphen} (1) \p{Line_Break: Hyphen} (Short: \p{Lb=HY}) (1: [\-]) \p{Line_Break: ID} \p{Line_Break=Ideographic} (172_462) \p{Line_Break: Ideographic} (Short: \p{Lb=ID}) (172_462: U+231A..231B, U+23F0..23F3, U+2600..2603, U+2614..2615, U+2618, U+261A..261C ...) \p{Line_Break: IN} \p{Line_Break=Inseparable} (6) \p{Line_Break: Infix_Numeric} (Short: \p{Lb=IS}) (13: [,.:;], U+037E, U+0589, U+060C..060D, U+07F8, U+2044 ...) \p{Line_Break: Inseparable} (Short: \p{Lb=IN}) (6: U+2024..2026, U+22EF, U+FE19, U+10AF6) \p{Line_Break: Inseperable} \p{Line_Break=Inseparable} (6) \p{Line_Break: IS} \p{Line_Break=Infix_Numeric} (13) \p{Line_Break: JL} (Short: \p{Lb=JL}) (125: U+1100..115F, U+A960..A97C) \p{Line_Break: JT} (Short: \p{Lb=JT}) (137: U+11A8..11FF, U+D7CB..D7FB) \p{Line_Break: JV} (Short: \p{Lb=JV}) (95: U+1160..11A7, U+D7B0..D7C6) \p{Line_Break: LF} \p{Line_Break=Line_Feed} (1) \p{Line_Break: Line_Feed} (Short: \p{Lb=LF}) (1: [\n]) \p{Line_Break: Mandatory_Break} (Short: \p{Lb=BK}) (4: [\cK\f], U+2028..2029) \p{Line_Break: Next_Line} (Short: \p{Lb=NL}) (1: [\x85]) \p{Line_Break: NL} \p{Line_Break=Next_Line} (1) \p{Line_Break: Nonstarter} (Short: \p{Lb=NS}) (33: U+17D6, U+203C..203D, U+2047..2049, U+3005, U+301C, U+303B..303C ...) \p{Line_Break: NS} \p{Line_Break=Nonstarter} (33) \p{Line_Break: NU} \p{Line_Break=Numeric} (642) \p{Line_Break: Numeric} (Short: \p{Lb=NU}) (642: [0-9], U+0660..0669, U+066B..066C, U+06F0..06F9, U+07C0..07C9, U+0966..096F ...) \p{Line_Break: OP} \p{Line_Break=Open_Punctuation} (88) \p{Line_Break: Open_Punctuation} (Short: \p{Lb=OP}) (88: [\(\[\{ \xa1\xbf], U+0F3A, U+0F3C, U+169B, U+201A, U+201E ...) \p{Line_Break: PO} \p{Line_Break=Postfix_Numeric} (36) \p{Line_Break: Postfix_Numeric} (Short: \p{Lb=PO}) (36: [\%\xa2 \xb0], U+0609..060B, U+066A, U+09F2..09F3, U+09F9, U+0D79 ...) \p{Line_Break: PR} \p{Line_Break=Prefix_Numeric} (68) \p{Line_Break: Prefix_Numeric} (Short: \p{Lb=PR}) (68: [\$+\\\xa3- \xa5\xb1], U+058F, U+07FE..07FF, U+09FB, U+0AF1, U+0BF9 ...) \p{Line_Break: QU} \p{Line_Break=Quotation} (39) \p{Line_Break: Quotation} (Short: \p{Lb=QU}) (39: [\"\'\xab\xbb], U+2018..2019, U+201B..201D, U+201F, U+2039..203A, U+275B..2760 ...) \p{Line_Break: Regional_Indicator} (Short: \p{Lb=RI}) (26: U+1F1E6..1F1FF) \p{Line_Break: RI} \p{Line_Break=Regional_Indicator} (26) \p{Line_Break: SA} \p{Line_Break=Complex_Context} (750) D \p{Line_Break: SG} \p{Line_Break=Surrogate} (2048) \p{Line_Break: SP} \p{Line_Break=Space} (1) \p{Line_Break: Space} (Short: \p{Lb=SP}) (1: [\x20]) D \p{Line_Break: Surrogate} Surrogates should never appear in well- formed text, and therefore shouldn't be the basis for line breaking (Short: \p{Lb=SG}) (2048: U+D800..DFFF) \p{Line_Break: SY} \p{Line_Break=Break_Symbols} (1) \p{Line_Break: Unknown} (Short: \p{Lb=XX}) (901_256 plus all above-Unicode code points: U+0378..0379, U+0380..0383, U+038B, U+038D, U+03A2, U+0530 ...) \p{Line_Break: WJ} \p{Line_Break=Word_Joiner} (2) \p{Line_Break: Word_Joiner} (Short: \p{Lb=WJ}) (2: U+2060, U+FEFF) \p{Line_Break: XX} \p{Line_Break=Unknown} (901_256 plus all above-Unicode code points) \p{Line_Break: ZW} \p{Line_Break=ZWSpace} (1) \p{Line_Break: ZWJ} (Short: \p{Lb=ZWJ}) (1: U+200D) \p{Line_Break: ZWSpace} (Short: \p{Lb=ZW}) (1: U+200B) \p{Line_Separator} \p{General_Category=Line_Separator} (Short: \p{Zl}) (1) \p{Linear_A} \p{Script_Extensions=Linear_A} (Short: \p{Lina}; NOT \p{Block=Linear_A}) (386) \p{Linear_B} \p{Script_Extensions=Linear_B} (Short: \p{Linb}) (268) X \p{Linear_B_Ideograms} \p{Block=Linear_B_Ideograms} (128) X \p{Linear_B_Syllabary} \p{Block=Linear_B_Syllabary} (128) \p{Lisu} \p{Script_Extensions=Lisu} (NOT \p{Block= Lisu}) (49) X \p{Lisu_Sup} \p{Lisu_Supplement} (= \p{Block= Lisu_Supplement}) (16) X \p{Lisu_Supplement} \p{Block=Lisu_Supplement} (Short: \p{InLisuSup}) (16) \p{Ll} \p{Lowercase_Letter} (= \p{General_Category=Lowercase_Letter}) (/i= General_Category=Cased_Letter) (2155) \p{Lm} \p{Modifier_Letter} (= \p{General_Category=Modifier_Letter}) (260) \p{Lo} \p{Other_Letter} (= \p{General_Category= Other_Letter}) (127_004) \p{LOE} \p{Logical_Order_Exception} (= \p{Logical_Order_Exception=Y}) (19) \p{LOE: *} \p{Logical_Order_Exception: *} \p{Logical_Order_Exception} \p{Logical_Order_Exception=Y} (Short: \p{LOE}) (19) \p{Logical_Order_Exception: N*} (Short: \p{LOE=N}, \P{LOE}) (1_114_093 plus all above-Unicode code points: U+0000..0E3F, U+0E45..0EBF, U+0EC5..19B4, U+19B8..19B9, U+19BB..AAB4, U+AAB7..AAB8 ...) \p{Logical_Order_Exception: Y*} (Short: \p{LOE=Y}, \p{LOE}) (19: U+0E40..0E44, U+0EC0..0EC4, U+19B5..19B7, U+19BA, U+AAB5..AAB6, U+AAB9 ...) X \p{Low_Surrogates} \p{Block=Low_Surrogates} (1024) \p{Lower} \p{XPosixLower} (= \p{Lowercase=Y}) (/i= Cased=Yes) (2344) \p{Lower: *} \p{Lowercase: *} \p{Lowercase} \p{XPosixLower} (= \p{Lowercase=Y}) (/i= Cased=Yes) (2344) \p{Lowercase: N*} (Short: \p{Lower=N}, \P{Lower}; /i= Cased= No) (1_111_768 plus all above-Unicode code points: [\x00-\x20!\"#\$\%&\' \(\)*+,\-.\/0-9:;<=>?\@A-Z\[\\\]\^_`\{ \|\}~\x7f-\xa9\xab-\xb4\xb6-\xb9\xbb- \xde\xf7], U+0100, U+0102, U+0104, U+0106, U+0108 ...) \p{Lowercase: Y*} (Short: \p{Lower=Y}, \p{Lower}; /i= Cased= Yes) (2344: [a-z\xaa\xb5\xba\xdf-\xf6 \xf8-\xff], U+0101, U+0103, U+0105, U+0107, U+0109 ...) \p{Lowercase_Letter} \p{General_Category=Lowercase_Letter} (Short: \p{Ll}; /i= General_Category= Cased_Letter) (2155) \p{Lt} \p{Titlecase_Letter} (= \p{General_Category=Titlecase_Letter}) (/i= General_Category=Cased_Letter) (31) \p{Lu} \p{Uppercase_Letter} (= \p{General_Category=Uppercase_Letter}) (/i= General_Category=Cased_Letter) (1791) \p{Lyci} \p{Lycian} (= \p{Script_Extensions= Lycian}) (NOT \p{Block=Lycian}) (29) \p{Lycian} \p{Script_Extensions=Lycian} (Short: \p{Lyci}; NOT \p{Block=Lycian}) (29) \p{Lydi} \p{Lydian} (= \p{Script_Extensions= Lydian}) (NOT \p{Block=Lydian}) (27) \p{Lydian} \p{Script_Extensions=Lydian} (Short: \p{Lydi}; NOT \p{Block=Lydian}) (27) \p{M} \pM \p{Mark} (= \p{General_Category=Mark}) (2295) \p{Mahajani} \p{Script_Extensions=Mahajani} (Short: \p{Mahj}; NOT \p{Block=Mahajani}) (61) \p{Mahj} \p{Mahajani} (= \p{Script_Extensions= Mahajani}) (NOT \p{Block=Mahajani}) (61) X \p{Mahjong} \p{Mahjong_Tiles} (= \p{Block= Mahjong_Tiles}) (48) X \p{Mahjong_Tiles} \p{Block=Mahjong_Tiles} (Short: \p{InMahjong}) (48) \p{Maka} \p{Makasar} (= \p{Script_Extensions= Makasar}) (NOT \p{Block=Makasar}) (25) \p{Makasar} \p{Script_Extensions=Makasar} (Short: \p{Maka}; NOT \p{Block=Makasar}) (25) \p{Malayalam} \p{Script_Extensions=Malayalam} (Short: \p{Mlym}; NOT \p{Block=Malayalam}) (126) \p{Mand} \p{Mandaic} (= \p{Script_Extensions= Mandaic}) (NOT \p{Block=Mandaic}) (30) \p{Mandaic} \p{Script_Extensions=Mandaic} (Short: \p{Mand}; NOT \p{Block=Mandaic}) (30) \p{Mani} \p{Manichaean} (= \p{Script_Extensions= Manichaean}) (NOT \p{Block=Manichaean}) (52) \p{Manichaean} \p{Script_Extensions=Manichaean} (Short: \p{Mani}; NOT \p{Block=Manichaean}) (52) \p{Marc} \p{Marchen} (= \p{Script_Extensions= Marchen}) (NOT \p{Block=Marchen}) (68) \p{Marchen} \p{Script_Extensions=Marchen} (Short: \p{Marc}; NOT \p{Block=Marchen}) (68) \p{Mark} \p{General_Category=Mark} (Short: \p{M}) (2295) \p{Masaram_Gondi} \p{Script_Extensions=Masaram_Gondi} (Short: \p{Gonm}; NOT \p{Block= Masaram_Gondi}) (77) \p{Math} \p{Math=Y} (2310) \p{Math: N*} (Single: \P{Math}) (1_111_802 plus all above-Unicode code points: [\x00-\x20! \"#\$\%&\'\(\)*,\-.\/0-9:;?\@A-Z \[\\\]_`a-z\{\}\x7f-\xab\xad-\xb0\xb2- \xd6\xd8-\xf6\xf8-\xff], U+0100..03CF, U+03D3..03D4, U+03D6..03EF, U+03F2..03F3, U+03F7..0605 ...) \p{Math: Y*} (Single: \p{Math}) (2310: [+<=>\^\|~\xac \xb1\xd7\xf7], U+03D0..03D2, U+03D5, U+03F0..03F1, U+03F4..03F6, U+0606..0608 ...) X \p{Math_Alphanum} \p{Mathematical_Alphanumeric_Symbols} (= \p{Block= Mathematical_Alphanumeric_Symbols}) (1024) X \p{Math_Operators} \p{Mathematical_Operators} (= \p{Block= Mathematical_Operators}) (256) \p{Math_Symbol} \p{General_Category=Math_Symbol} (Short: \p{Sm}) (948) X \p{Mathematical_Alphanumeric_Symbols} \p{Block= Mathematical_Alphanumeric_Symbols} (Short: \p{InMathAlphanum}) (1024) X \p{Mathematical_Operators} \p{Block=Mathematical_Operators} (Short: \p{InMathOperators}) (256) X \p{Mayan_Numerals} \p{Block=Mayan_Numerals} (32) \p{Mc} \p{Spacing_Mark} (= \p{General_Category= Spacing_Mark}) (443) \p{Me} \p{Enclosing_Mark} (= \p{General_Category= Enclosing_Mark}) (13) \p{Medefaidrin} \p{Script_Extensions=Medefaidrin} (Short: \p{Medf}; NOT \p{Block=Medefaidrin}) (91) \p{Medf} \p{Medefaidrin} (= \p{Script_Extensions= Medefaidrin}) (NOT \p{Block= Medefaidrin}) (91) \p{Meetei_Mayek} \p{Script_Extensions=Meetei_Mayek} (Short: \p{Mtei}; NOT \p{Block=Meetei_Mayek}) (79) X \p{Meetei_Mayek_Ext} \p{Meetei_Mayek_Extensions} (= \p{Block= Meetei_Mayek_Extensions}) (32) X \p{Meetei_Mayek_Extensions} \p{Block=Meetei_Mayek_Extensions} (Short: \p{InMeeteiMayekExt}) (32) \p{Mend} \p{Mende_Kikakui} (= \p{Script_Extensions= Mende_Kikakui}) (NOT \p{Block= Mende_Kikakui}) (213) \p{Mende_Kikakui} \p{Script_Extensions=Mende_Kikakui} (Short: \p{Mend}; NOT \p{Block= Mende_Kikakui}) (213) \p{Merc} \p{Meroitic_Cursive} (= \p{Script_Extensions=Meroitic_Cursive}) (NOT \p{Block=Meroitic_Cursive}) (90) \p{Mero} \p{Meroitic_Hieroglyphs} (= \p{Script_Extensions= Meroitic_Hieroglyphs}) (32) \p{Meroitic_Cursive} \p{Script_Extensions=Meroitic_Cursive} (Short: \p{Merc}; NOT \p{Block= Meroitic_Cursive}) (90) \p{Meroitic_Hieroglyphs} \p{Script_Extensions= Meroitic_Hieroglyphs} (Short: \p{Mero}) (32) \p{Miao} \p{Script_Extensions=Miao} (NOT \p{Block= Miao}) (149) X \p{Misc_Arrows} \p{Miscellaneous_Symbols_And_Arrows} (= \p{Block= Miscellaneous_Symbols_And_Arrows}) (256) X \p{Misc_Math_Symbols_A} \p{Miscellaneous_Mathematical_Symbols_A} (= \p{Block= Miscellaneous_Mathematical_Symbols_A}) (48) X \p{Misc_Math_Symbols_B} \p{Miscellaneous_Mathematical_Symbols_B} (= \p{Block= Miscellaneous_Mathematical_Symbols_B}) (128) X \p{Misc_Pictographs} \p{Miscellaneous_Symbols_And_Pictographs} (= \p{Block= Miscellaneous_Symbols_And_Pictographs}) (768) X \p{Misc_Symbols} \p{Miscellaneous_Symbols} (= \p{Block= Miscellaneous_Symbols}) (256) X \p{Misc_Technical} \p{Miscellaneous_Technical} (= \p{Block= Miscellaneous_Technical}) (256) X \p{Miscellaneous_Mathematical_Symbols_A} \p{Block= Miscellaneous_Mathematical_Symbols_A} (Short: \p{InMiscMathSymbolsA}) (48) X \p{Miscellaneous_Mathematical_Symbols_B} \p{Block= Miscellaneous_Mathematical_Symbols_B} (Short: \p{InMiscMathSymbolsB}) (128) X \p{Miscellaneous_Symbols} \p{Block=Miscellaneous_Symbols} (Short: \p{InMiscSymbols}) (256) X \p{Miscellaneous_Symbols_And_Arrows} \p{Block= Miscellaneous_Symbols_And_Arrows} (Short: \p{InMiscArrows}) (256) X \p{Miscellaneous_Symbols_And_Pictographs} \p{Block= Miscellaneous_Symbols_And_Pictographs} (Short: \p{InMiscPictographs}) (768) X \p{Miscellaneous_Technical} \p{Block=Miscellaneous_Technical} (Short: \p{InMiscTechnical}) (256) \p{Mlym} \p{Malayalam} (= \p{Script_Extensions= Malayalam}) (NOT \p{Block=Malayalam}) (126) \p{Mn} \p{Nonspacing_Mark} (= \p{General_Category=Nonspacing_Mark}) (1839) \p{Modi} \p{Script_Extensions=Modi} (NOT \p{Block= Modi}) (89) \p{Modifier_Letter} \p{General_Category=Modifier_Letter} (Short: \p{Lm}) (260) X \p{Modifier_Letters} \p{Spacing_Modifier_Letters} (= \p{Block= Spacing_Modifier_Letters}) (80) \p{Modifier_Symbol} \p{General_Category=Modifier_Symbol} (Short: \p{Sk}) (123) X \p{Modifier_Tone_Letters} \p{Block=Modifier_Tone_Letters} (32) \p{Mong} \p{Mongolian} (= \p{Script_Extensions= Mongolian}) (NOT \p{Block=Mongolian}) (171) \p{Mongolian} \p{Script_Extensions=Mongolian} (Short: \p{Mong}; NOT \p{Block=Mongolian}) (171) X \p{Mongolian_Sup} \p{Mongolian_Supplement} (= \p{Block= Mongolian_Supplement}) (32) X \p{Mongolian_Supplement} \p{Block=Mongolian_Supplement} (Short: \p{InMongolianSup}) (32) \p{Mro} \p{Script_Extensions=Mro} (NOT \p{Block= Mro}) (43) \p{Mroo} \p{Mro} (= \p{Script_Extensions=Mro}) (NOT \p{Block=Mro}) (43) \p{Mtei} \p{Meetei_Mayek} (= \p{Script_Extensions= Meetei_Mayek}) (NOT \p{Block= Meetei_Mayek}) (79) \p{Mult} \p{Multani} (= \p{Script_Extensions= Multani}) (NOT \p{Block=Multani}) (48) \p{Multani} \p{Script_Extensions=Multani} (Short: \p{Mult}; NOT \p{Block=Multani}) (48) X \p{Music} \p{Musical_Symbols} (= \p{Block= Musical_Symbols}) (256) X \p{Musical_Symbols} \p{Block=Musical_Symbols} (Short: \p{InMusic}) (256) \p{Myanmar} \p{Script_Extensions=Myanmar} (Short: \p{Mymr}; NOT \p{Block=Myanmar}) (224) X \p{Myanmar_Ext_A} \p{Myanmar_Extended_A} (= \p{Block= Myanmar_Extended_A}) (32) X \p{Myanmar_Ext_B} \p{Myanmar_Extended_B} (= \p{Block= Myanmar_Extended_B}) (32) X \p{Myanmar_Extended_A} \p{Block=Myanmar_Extended_A} (Short: \p{InMyanmarExtA}) (32) X \p{Myanmar_Extended_B} \p{Block=Myanmar_Extended_B} (Short: \p{InMyanmarExtB}) (32) \p{Mymr} \p{Myanmar} (= \p{Script_Extensions= Myanmar}) (NOT \p{Block=Myanmar}) (224) \p{N} \pN \p{Number} (= \p{General_Category=Number}) (1781) \p{Na=*} \p{Name=*} \p{Nabataean} \p{Script_Extensions=Nabataean} (Short: \p{Nbat}; NOT \p{Block=Nabataean}) (40) \p{Name=*} Combination of Name and Name_Alias properties; has special loose matching rules, for which see Unicode UAX #44 \p{Nand} \p{Nandinagari} (= \p{Script_Extensions= Nandinagari}) (NOT \p{Block= Nandinagari}) (86) \p{Nandinagari} \p{Script_Extensions=Nandinagari} (Short: \p{Nand}; NOT \p{Block=Nandinagari}) (86) \p{Narb} \p{Old_North_Arabian} (= \p{Script_Extensions=Old_North_Arabian}) (32) X \p{NB} \p{No_Block} (= \p{Block=No_Block}) (826_640 plus all above-Unicode code points) \p{Nbat} \p{Nabataean} (= \p{Script_Extensions= Nabataean}) (NOT \p{Block=Nabataean}) (40) \p{NChar} \p{Noncharacter_Code_Point} (= \p{Noncharacter_Code_Point=Y}) (66) \p{NChar: *} \p{Noncharacter_Code_Point: *} \p{Nd} \p{XPosixDigit} (= \p{General_Category= Decimal_Number}) (650) \p{New_Tai_Lue} \p{Script_Extensions=New_Tai_Lue} (Short: \p{Talu}; NOT \p{Block=New_Tai_Lue}) (83) \p{Newa} \p{Script_Extensions=Newa} (NOT \p{Block= Newa}) (97) \p{NFC_QC: *} \p{NFC_Quick_Check: *} \p{NFC_Quick_Check: M} \p{NFC_Quick_Check=Maybe} (111) \p{NFC_Quick_Check: Maybe} (Short: \p{NFCQC=M}) (111: U+0300..0304, U+0306..030C, U+030F, U+0311, U+0313..0314, U+031B ...) \p{NFC_Quick_Check: N} \p{NFC_Quick_Check=No} (NOT \P{NFC_Quick_Check} NOR \P{NFC_QC}) (1120) \p{NFC_Quick_Check: No} (Short: \p{NFCQC=N}; NOT \P{NFC_Quick_Check} NOR \P{NFC_QC}) (1120: U+0340..0341, U+0343..0344, U+0374, U+037E, U+0387, U+0958..095F ...) \p{NFC_Quick_Check: Y} \p{NFC_Quick_Check=Yes} (NOT \p{NFC_Quick_Check} NOR \p{NFC_QC}) (1_112_881 plus all above-Unicode code points) \p{NFC_Quick_Check: Yes} (Short: \p{NFCQC=Y}; NOT \p{NFC_Quick_Check} NOR \p{NFC_QC}) (1_112_881 plus all above-Unicode code points: U+0000..02FF, U+0305, U+030D..030E, U+0310, U+0312, U+0315..031A ...) \p{NFD_QC: *} \p{NFD_Quick_Check: *} \p{NFD_Quick_Check: N} \p{NFD_Quick_Check=No} (NOT \P{NFD_Quick_Check} NOR \P{NFD_QC}) (13_233) \p{NFD_Quick_Check: No} (Short: \p{NFDQC=N}; NOT \P{NFD_Quick_Check} NOR \P{NFD_QC}) (13_233: [\xc0-\xc5\xc7-\xcf\xd1-\xd6 \xd9-\xdd\xe0-\xe5\xe7-\xef\xf1-\xf6 \xf9-\xfd\xff], U+0100..010F, U+0112..0125, U+0128..0130, U+0134..0137, U+0139..013E ...) \p{NFD_Quick_Check: Y} \p{NFD_Quick_Check=Yes} (NOT \p{NFD_Quick_Check} NOR \p{NFD_QC}) (1_100_879 plus all above-Unicode code points) \p{NFD_Quick_Check: Yes} (Short: \p{NFDQC=Y}; NOT \p{NFD_Quick_Check} NOR \p{NFD_QC}) (1_100_879 plus all above-Unicode code points: [\x00-\xbf\xc6\xd0\xd7-\xd8\xde- \xdf\xe6\xf0\xf7-\xf8\xfe], U+0110..0111, U+0126..0127, U+0131..0133, U+0138, U+013F..0142 ...) \p{NFKC_QC: *} \p{NFKC_Quick_Check: *} \p{NFKC_Quick_Check: M} \p{NFKC_Quick_Check=Maybe} (111) \p{NFKC_Quick_Check: Maybe} (Short: \p{NFKCQC=M}) (111: U+0300..0304, U+0306..030C, U+030F, U+0311, U+0313..0314, U+031B ...) \p{NFKC_Quick_Check: N} \p{NFKC_Quick_Check=No} (NOT \P{NFKC_Quick_Check} NOR \P{NFKC_QC}) (4807) \p{NFKC_Quick_Check: No} (Short: \p{NFKCQC=N}; NOT \P{NFKC_Quick_Check} NOR \P{NFKC_QC}) (4807: [\xa0\xa8\xaa\xaf\xb2-\xb5\xb8- \xba\xbc-\xbe], U+0132..0133, U+013F..0140, U+0149, U+017F, U+01C4..01CC ...) \p{NFKC_Quick_Check: Y} \p{NFKC_Quick_Check=Yes} (NOT \p{NFKC_Quick_Check} NOR \p{NFKC_QC}) (1_109_194 plus all above-Unicode code points) \p{NFKC_Quick_Check: Yes} (Short: \p{NFKCQC=Y}; NOT \p{NFKC_Quick_Check} NOR \p{NFKC_QC}) (1_109_194 plus all above-Unicode code points: [\x00-\x9f\xa1-\xa7\xa9\xab- \xae\xb0-\xb1\xb6-\xb7\xbb\xbf-\xff], U+0100..0131, U+0134..013E, U+0141..0148, U+014A..017E, U+0180..01C3 ...) \p{NFKD_QC: *} \p{NFKD_Quick_Check: *} \p{NFKD_Quick_Check: N} \p{NFKD_Quick_Check=No} (NOT \P{NFKD_Quick_Check} NOR \P{NFKD_QC}) (16_908) \p{NFKD_Quick_Check: No} (Short: \p{NFKDQC=N}; NOT \P{NFKD_Quick_Check} NOR \P{NFKD_QC}) (16_908: [\xa0\xa8\xaa\xaf\xb2-\xb5\xb8- \xba\xbc-\xbe\xc0-\xc5\xc7-\xcf\xd1- \xd6\xd9-\xdd\xe0-\xe5\xe7-\xef\xf1- \xf6\xf9-\xfd\xff], U+0100..010F, U+0112..0125, U+0128..0130, U+0132..0137, U+0139..0140 ...) \p{NFKD_Quick_Check: Y} \p{NFKD_Quick_Check=Yes} (NOT \p{NFKD_Quick_Check} NOR \p{NFKD_QC}) (1_097_204 plus all above-Unicode code points) \p{NFKD_Quick_Check: Yes} (Short: \p{NFKDQC=Y}; NOT \p{NFKD_Quick_Check} NOR \p{NFKD_QC}) (1_097_204 plus all above-Unicode code points: [\x00-\x9f\xa1-\xa7\xa9\xab- \xae\xb0-\xb1\xb6-\xb7\xbb\xbf\xc6\xd0 \xd7-\xd8\xde-\xdf\xe6\xf0\xf7-\xf8 \xfe], U+0110..0111, U+0126..0127, U+0131, U+0138, U+0141..0142 ...) \p{Nko} \p{Script_Extensions=Nko} (NOT \p{Block= NKo}) (62) \p{Nkoo} \p{Nko} (= \p{Script_Extensions=Nko}) (NOT \p{Block=NKo}) (62) \p{Nl} \p{Letter_Number} (= \p{General_Category= Letter_Number}) (236) \p{No} \p{Other_Number} (= \p{General_Category= Other_Number}) (895) X \p{No_Block} \p{Block=No_Block} (Short: \p{InNB}) (826_640 plus all above-Unicode code points) \p{Noncharacter_Code_Point} \p{Noncharacter_Code_Point=Y} (Short: \p{NChar}) (66) \p{Noncharacter_Code_Point: N*} (Short: \p{NChar=N}, \P{NChar}) (1_114_046 plus all above-Unicode code points: U+0000..FDCF, U+FDF0..FFFD, U+10000..1FFFD, U+20000..2FFFD, U+30000..3FFFD, U+40000..4FFFD ...) \p{Noncharacter_Code_Point: Y*} (Short: \p{NChar=Y}, \p{NChar}) (66: U+FDD0..FDEF, U+FFFE..FFFF, U+1FFFE..1FFFF, U+2FFFE..2FFFF, U+3FFFE..3FFFF, U+4FFFE..4FFFF ...) \p{Nonspacing_Mark} \p{General_Category=Nonspacing_Mark} (Short: \p{Mn}) (1839) \p{Nshu} \p{Nushu} (= \p{Script_Extensions=Nushu}) (NOT \p{Block=Nushu}) (397) \p{Nt: *} \p{Numeric_Type: *} \p{Number} \p{General_Category=Number} (Short: \p{N}) (1781) X \p{Number_Forms} \p{Block=Number_Forms} (64) \p{Numeric_Type: De} \p{Numeric_Type=Decimal} (650) \p{Numeric_Type: Decimal} (Short: \p{Nt=De}) (650: [0-9], U+0660..0669, U+06F0..06F9, U+07C0..07C9, U+0966..096F, U+09E6..09EF ...) \p{Numeric_Type: Di} \p{Numeric_Type=Digit} (128) \p{Numeric_Type: Digit} (Short: \p{Nt=Di}) (128: [\xb2-\xb3\xb9], U+1369..1371, U+19DA, U+2070, U+2074..2079, U+2080..2089 ...) \p{Numeric_Type: None} (Short: \p{Nt=None}) (1_112_250 plus all above-Unicode code points: [\x00-\x20! \"#\$\%&\'\(\)*+,\-.\/:;<=>?\@A-Z\[\\\] \^_`a-z\{\|\}~\x7f-\xb1\xb4-\xb8\xba- \xbb\xbf-\xff], U+0100..065F, U+066A..06EF, U+06FA..07BF, U+07CA..0965, U+0970..09E5 ...) \p{Numeric_Type: Nu} \p{Numeric_Type=Numeric} (1084) \p{Numeric_Type: Numeric} (Short: \p{Nt=Nu}) (1084: [\xbc-\xbe], U+09F4..09F9, U+0B72..0B77, U+0BF0..0BF2, U+0C78..0C7E, U+0D58..0D5E ...) T \p{Numeric_Value: -1/2} (Short: \p{Nv=-1/2}) (1: U+0F33) T \p{Numeric_Value: 0} (Short: \p{Nv=0}) (83: [0], U+0660, U+06F0, U+07C0, U+0966, U+09E6 ...) T \p{Numeric_Value: 1/320} (Short: \p{Nv=1/320}) (2: U+11FC0, U+11FD4) T \p{Numeric_Value: 1/160} (Short: \p{Nv=1/160}) (2: U+0D58, U+11FC1) T \p{Numeric_Value: 1/80} (Short: \p{Nv=1/80}) (1: U+11FC2) T \p{Numeric_Value: 1/64} (Short: \p{Nv=1/64}) (1: U+11FC3) T \p{Numeric_Value: 1/40} (Short: \p{Nv=1/40}) (2: U+0D59, U+11FC4) T \p{Numeric_Value: 1/32} (Short: \p{Nv=1/32}) (1: U+11FC5) T \p{Numeric_Value: 3/80} (Short: \p{Nv=3/80}) (2: U+0D5A, U+11FC6) T \p{Numeric_Value: 3/64} (Short: \p{Nv=3/64}) (1: U+11FC7) T \p{Numeric_Value: 1/20} (Short: \p{Nv=1/20}) (2: U+0D5B, U+11FC8) T \p{Numeric_Value: 1/16} (Short: \p{Nv=1/16}) (6: U+09F4, U+0B75, U+0D76, U+A833, U+11FC9..11FCA) T \p{Numeric_Value: 1/12} (Short: \p{Nv=1/12}) (1: U+109F6) T \p{Numeric_Value: 1/10} (Short: \p{Nv=1/10}) (3: U+0D5C, U+2152, U+11FCB) T \p{Numeric_Value: 1/9} (Short: \p{Nv=1/9}) (1: U+2151) T \p{Numeric_Value: 1/8} (Short: \p{Nv=1/8}) (7: U+09F5, U+0B76, U+0D77, U+215B, U+A834, U+11FCC ...) T \p{Numeric_Value: 1/7} (Short: \p{Nv=1/7}) (1: U+2150) T \p{Numeric_Value: 3/20} (Short: \p{Nv=3/20}) (2: U+0D5D, U+11FCD) T \p{Numeric_Value: 1/6} (Short: \p{Nv=1/6}) (4: U+2159, U+109F7, U+12461, U+1ED3D) T \p{Numeric_Value: 3/16} (Short: \p{Nv=3/16}) (5: U+09F6, U+0B77, U+0D78, U+A835, U+11FCE) T \p{Numeric_Value: 1/5} (Short: \p{Nv=1/5}) (3: U+0D5E, U+2155, U+11FCF) T \p{Numeric_Value: 1/4} (Short: \p{Nv=1/4}) (14: [\xbc], U+09F7, U+0B72, U+0D73, U+A830, U+10140 ...) T \p{Numeric_Value: 1/3} (Short: \p{Nv=1/3}) (6: U+2153, U+109F9, U+10E7D, U+1245A, U+1245D, U+12465) T \p{Numeric_Value: 3/8} (Short: \p{Nv=3/8}) (1: U+215C) T \p{Numeric_Value: 2/5} (Short: \p{Nv=2/5}) (1: U+2156) T \p{Numeric_Value: 5/12} (Short: \p{Nv=5/12}) (1: U+109FA) T \p{Numeric_Value: 1/2} (Short: \p{Nv=1/2}) (19: [\xbd], U+0B73, U+0D74, U+0F2A, U+2CFD, U+A831 ...) T \p{Numeric_Value: 7/12} (Short: \p{Nv=7/12}) (1: U+109FC) T \p{Numeric_Value: 3/5} (Short: \p{Nv=3/5}) (1: U+2157) T \p{Numeric_Value: 5/8} (Short: \p{Nv=5/8}) (1: U+215D) T \p{Numeric_Value: 2/3} (Short: \p{Nv=2/3}) (7: U+2154, U+10177, U+109FD, U+10E7E, U+1245B, U+1245E ...) T \p{Numeric_Value: 3/4} (Short: \p{Nv=3/4}) (9: [\xbe], U+09F8, U+0B74, U+0D75, U+A832, U+10178 ...) T \p{Numeric_Value: 4/5} (Short: \p{Nv=4/5}) (1: U+2158) T \p{Numeric_Value: 5/6} (Short: \p{Nv=5/6}) (3: U+215A, U+109FF, U+1245C) T \p{Numeric_Value: 7/8} (Short: \p{Nv=7/8}) (1: U+215E) T \p{Numeric_Value: 11/12} (Short: \p{Nv=11/12}) (1: U+109BC) T \p{Numeric_Value: 1} (Short: \p{Nv=1}) (140: [1\xb9], U+0661, U+06F1, U+07C1, U+0967, U+09E7 ...) T \p{Numeric_Value: 3/2} (Short: \p{Nv=3/2}) (1: U+0F2B) T \p{Numeric_Value: 2} (Short: \p{Nv=2}) (139: [2\xb2], U+0662, U+06F2, U+07C2, U+0968, U+09E8 ...) T \p{Numeric_Value: 5/2} (Short: \p{Nv=5/2}) (1: U+0F2C) T \p{Numeric_Value: 3} (Short: \p{Nv=3}) (140: [3\xb3], U+0663, U+06F3, U+07C3, U+0969, U+09E9 ...) T \p{Numeric_Value: 7/2} (Short: \p{Nv=7/2}) (1: U+0F2D) T \p{Numeric_Value: 4} (Short: \p{Nv=4}) (131: [4], U+0664, U+06F4, U+07C4, U+096A, U+09EA ...) T \p{Numeric_Value: 9/2} (Short: \p{Nv=9/2}) (1: U+0F2E) T \p{Numeric_Value: 5} (Short: \p{Nv=5}) (129: [5], U+0665, U+06F5, U+07C5, U+096B, U+09EB ...) T \p{Numeric_Value: 11/2} (Short: \p{Nv=11/2}) (1: U+0F2F) T \p{Numeric_Value: 6} (Short: \p{Nv=6}) (113: [6], U+0666, U+06F6, U+07C6, U+096C, U+09EC ...) T \p{Numeric_Value: 13/2} (Short: \p{Nv=13/2}) (1: U+0F30) T \p{Numeric_Value: 7} (Short: \p{Nv=7}) (112: [7], U+0667, U+06F7, U+07C7, U+096D, U+09ED ...) T \p{Numeric_Value: 15/2} (Short: \p{Nv=15/2}) (1: U+0F31) T \p{Numeric_Value: 8} (Short: \p{Nv=8}) (108: [8], U+0668, U+06F8, U+07C8, U+096E, U+09EE ...) T \p{Numeric_Value: 17/2} (Short: \p{Nv=17/2}) (1: U+0F32) T \p{Numeric_Value: 9} (Short: \p{Nv=9}) (112: [9], U+0669, U+06F9, U+07C9, U+096F, U+09EF ...) T \p{Numeric_Value: 10} (Short: \p{Nv=10}) (62: U+0BF0, U+0D70, U+1372, U+2169, U+2179, U+2469 ...) T \p{Numeric_Value: 11} (Short: \p{Nv=11}) (8: U+216A, U+217A, U+246A, U+247E, U+2492, U+24EB ...) T \p{Numeric_Value: 12} (Short: \p{Nv=12}) (8: U+216B, U+217B, U+246B, U+247F, U+2493, U+24EC ...) T \p{Numeric_Value: 13} (Short: \p{Nv=13}) (6: U+246C, U+2480, U+2494, U+24ED, U+16E8D, U+1D2ED) T \p{Numeric_Value: 14} (Short: \p{Nv=14}) (6: U+246D, U+2481, U+2495, U+24EE, U+16E8E, U+1D2EE) T \p{Numeric_Value: 15} (Short: \p{Nv=15}) (6: U+246E, U+2482, U+2496, U+24EF, U+16E8F, U+1D2EF) T \p{Numeric_Value: 16} (Short: \p{Nv=16}) (7: U+09F9, U+246F, U+2483, U+2497, U+24F0, U+16E90 ...) T \p{Numeric_Value: 17} (Short: \p{Nv=17}) (7: U+16EE, U+2470, U+2484, U+2498, U+24F1, U+16E91 ...) T \p{Numeric_Value: 18} (Short: \p{Nv=18}) (7: U+16EF, U+2471, U+2485, U+2499, U+24F2, U+16E92 ...) T \p{Numeric_Value: 19} (Short: \p{Nv=19}) (7: U+16F0, U+2472, U+2486, U+249A, U+24F3, U+16E93 ...) T \p{Numeric_Value: 20} (Short: \p{Nv=20}) (36: U+1373, U+2473, U+2487, U+249B, U+24F4, U+3039 ...) T \p{Numeric_Value: 21} (Short: \p{Nv=21}) (1: U+3251) T \p{Numeric_Value: 22} (Short: \p{Nv=22}) (1: U+3252) T \p{Numeric_Value: 23} (Short: \p{Nv=23}) (1: U+3253) T \p{Numeric_Value: 24} (Short: \p{Nv=24}) (1: U+3254) T \p{Numeric_Value: 25} (Short: \p{Nv=25}) (1: U+3255) T \p{Numeric_Value: 26} (Short: \p{Nv=26}) (1: U+3256) T \p{Numeric_Value: 27} (Short: \p{Nv=27}) (1: U+3257) T \p{Numeric_Value: 28} (Short: \p{Nv=28}) (1: U+3258) T \p{Numeric_Value: 29} (Short: \p{Nv=29}) (1: U+3259) T \p{Numeric_Value: 30} (Short: \p{Nv=30}) (19: U+1374, U+303A, U+324A, U+325A, U+5345, U+10112 ...) T \p{Numeric_Value: 31} (Short: \p{Nv=31}) (1: U+325B) T \p{Numeric_Value: 32} (Short: \p{Nv=32}) (1: U+325C) T \p{Numeric_Value: 33} (Short: \p{Nv=33}) (1: U+325D) T \p{Numeric_Value: 34} (Short: \p{Nv=34}) (1: U+325E) T \p{Numeric_Value: 35} (Short: \p{Nv=35}) (1: U+325F) T \p{Numeric_Value: 36} (Short: \p{Nv=36}) (1: U+32B1) T \p{Numeric_Value: 37} (Short: \p{Nv=37}) (1: U+32B2) T \p{Numeric_Value: 38} (Short: \p{Nv=38}) (1: U+32B3) T \p{Numeric_Value: 39} (Short: \p{Nv=39}) (1: U+32B4) T \p{Numeric_Value: 40} (Short: \p{Nv=40}) (18: U+1375, U+324B, U+32B5, U+534C, U+10113, U+102ED ...) T \p{Numeric_Value: 41} (Short: \p{Nv=41}) (1: U+32B6) T \p{Numeric_Value: 42} (Short: \p{Nv=42}) (1: U+32B7) T \p{Numeric_Value: 43} (Short: \p{Nv=43}) (1: U+32B8) T \p{Numeric_Value: 44} (Short: \p{Nv=44}) (1: U+32B9) T \p{Numeric_Value: 45} (Short: \p{Nv=45}) (1: U+32BA) T \p{Numeric_Value: 46} (Short: \p{Nv=46}) (1: U+32BB) T \p{Numeric_Value: 47} (Short: \p{Nv=47}) (1: U+32BC) T \p{Numeric_Value: 48} (Short: \p{Nv=48}) (1: U+32BD) T \p{Numeric_Value: 49} (Short: \p{Nv=49}) (1: U+32BE) T \p{Numeric_Value: 50} (Short: \p{Nv=50}) (29: U+1376, U+216C, U+217C, U+2186, U+324C, U+32BF ...) T \p{Numeric_Value: 60} (Short: \p{Nv=60}) (13: U+1377, U+324D, U+10115, U+102EF, U+109CE, U+10E6E ...) T \p{Numeric_Value: 70} (Short: \p{Nv=70}) (13: U+1378, U+324E, U+10116, U+102F0, U+109CF, U+10E6F ...) T \p{Numeric_Value: 80} (Short: \p{Nv=80}) (12: U+1379, U+324F, U+10117, U+102F1, U+10E70, U+11062 ...) T \p{Numeric_Value: 90} (Short: \p{Nv=90}) (12: U+137A, U+10118, U+102F2, U+10341, U+10E71, U+11063 ...) T \p{Numeric_Value: 100} (Short: \p{Nv=100}) (35: U+0BF1, U+0D71, U+137B, U+216D, U+217D, U+4F70 ...) T \p{Numeric_Value: 200} (Short: \p{Nv=200}) (6: U+1011A, U+102F4, U+109D3, U+10E73, U+1EC84, U+1ED14) T \p{Numeric_Value: 300} (Short: \p{Nv=300}) (7: U+1011B, U+1016B, U+102F5, U+109D4, U+10E74, U+1EC85 ...) T \p{Numeric_Value: 400} (Short: \p{Nv=400}) (7: U+1011C, U+102F6, U+109D5, U+10E75, U+1EC86, U+1ED16 ...) T \p{Numeric_Value: 500} (Short: \p{Nv=500}) (16: U+216E, U+217E, U+1011D, U+10145, U+1014C, U+10153 ...) T \p{Numeric_Value: 600} (Short: \p{Nv=600}) (7: U+1011E, U+102F8, U+109D7, U+10E77, U+1EC88, U+1ED18 ...) T \p{Numeric_Value: 700} (Short: \p{Nv=700}) (6: U+1011F, U+102F9, U+109D8, U+10E78, U+1EC89, U+1ED19) T \p{Numeric_Value: 800} (Short: \p{Nv=800}) (6: U+10120, U+102FA, U+109D9, U+10E79, U+1EC8A, U+1ED1A) T \p{Numeric_Value: 900} (Short: \p{Nv=900}) (7: U+10121, U+102FB, U+1034A, U+109DA, U+10E7A, U+1EC8B ...) T \p{Numeric_Value: 1000} (Short: \p{Nv=1000}) (22: U+0BF2, U+0D72, U+216F, U+217F..2180, U+4EDF, U+5343 ...) T \p{Numeric_Value: 2000} (Short: \p{Nv=2000}) (5: U+10123, U+109DC, U+1EC8D, U+1ED1D, U+1ED3A) T \p{Numeric_Value: 3000} (Short: \p{Nv=3000}) (4: U+10124, U+109DD, U+1EC8E, U+1ED1E) T \p{Numeric_Value: 4000} (Short: \p{Nv=4000}) (4: U+10125, U+109DE, U+1EC8F, U+1ED1F) T \p{Numeric_Value: 5000} (Short: \p{Nv=5000}) (8: U+2181, U+10126, U+10146, U+1014E, U+10172, U+109DF ...) T \p{Numeric_Value: 6000} (Short: \p{Nv=6000}) (4: U+10127, U+109E0, U+1EC91, U+1ED21) T \p{Numeric_Value: 7000} (Short: \p{Nv=7000}) (4: U+10128, U+109E1, U+1EC92, U+1ED22) T \p{Numeric_Value: 8000} (Short: \p{Nv=8000}) (4: U+10129, U+109E2, U+1EC93, U+1ED23) T \p{Numeric_Value: 9000} (Short: \p{Nv=9000}) (4: U+1012A, U+109E3, U+1EC94, U+1ED24) T \p{Numeric_Value: 10000} (= 1.0e+04) (Short: \p{Nv=10000}) (13: U+137C, U+2182, U+4E07, U+842C, U+1012B, U+10155 ...) T \p{Numeric_Value: 20000} (= 2.0e+04) (Short: \p{Nv=20000}) (4: U+1012C, U+109E5, U+1EC96, U+1ED26) T \p{Numeric_Value: 30000} (= 3.0e+04) (Short: \p{Nv=30000}) (4: U+1012D, U+109E6, U+1EC97, U+1ED27) T \p{Numeric_Value: 40000} (= 4.0e+04) (Short: \p{Nv=40000}) (4: U+1012E, U+109E7, U+1EC98, U+1ED28) T \p{Numeric_Value: 50000} (= 5.0e+04) (Short: \p{Nv=50000}) (7: U+2187, U+1012F, U+10147, U+10156, U+109E8, U+1EC99 ...) T \p{Numeric_Value: 60000} (= 6.0e+04) (Short: \p{Nv=60000}) (4: U+10130, U+109E9, U+1EC9A, U+1ED2A) T \p{Numeric_Value: 70000} (= 7.0e+04) (Short: \p{Nv=70000}) (4: U+10131, U+109EA, U+1EC9B, U+1ED2B) T \p{Numeric_Value: 80000} (= 8.0e+04) (Short: \p{Nv=80000}) (4: U+10132, U+109EB, U+1EC9C, U+1ED2C) T \p{Numeric_Value: 90000} (= 9.0e+04) (Short: \p{Nv=90000}) (4: U+10133, U+109EC, U+1EC9D, U+1ED2D) T \p{Numeric_Value: 100000} (= 1.0e+05) (Short: \p{Nv=100000}) (5: U+2188, U+109ED, U+1EC9E, U+1ECA0, U+1ECB4) T \p{Numeric_Value: 200000} (= 2.0e+05) (Short: \p{Nv=200000}) (2: U+109EE, U+1EC9F) T \p{Numeric_Value: 216000} (= 2.2e+05) (Short: \p{Nv=216000}) (1: U+12432) T \p{Numeric_Value: 300000} (= 3.0e+05) (Short: \p{Nv=300000}) (1: U+109EF) T \p{Numeric_Value: 400000} (= 4.0e+05) (Short: \p{Nv=400000}) (1: U+109F0) T \p{Numeric_Value: 432000} (= 4.3e+05) (Short: \p{Nv=432000}) (1: U+12433) T \p{Numeric_Value: 500000} (= 5.0e+05) (Short: \p{Nv=500000}) (1: U+109F1) T \p{Numeric_Value: 600000} (= 6.0e+05) (Short: \p{Nv=600000}) (1: U+109F2) T \p{Numeric_Value: 700000} (= 7.0e+05) (Short: \p{Nv=700000}) (1: U+109F3) T \p{Numeric_Value: 800000} (= 8.0e+05) (Short: \p{Nv=800000}) (1: U+109F4) T \p{Numeric_Value: 900000} (= 9.0e+05) (Short: \p{Nv=900000}) (1: U+109F5) T \p{Numeric_Value: 1000000} (= 1.0e+06) (Short: \p{Nv=1000000}) (1: U+16B5E) T \p{Numeric_Value: 10000000} (= 1.0e+07) (Short: \p{Nv=10000000}) (1: U+1ECA1) T \p{Numeric_Value: 20000000} (= 2.0e+07) (Short: \p{Nv=20000000}) (1: U+1ECA2) T \p{Numeric_Value: 100000000} (= 1.0e+08) (Short: \p{Nv=100000000}) (3: U+4EBF, U+5104, U+16B5F) T \p{Numeric_Value: 10000000000} (= 1.0e+10) (Short: \p{Nv= 10000000000}) (1: U+16B60) T \p{Numeric_Value: 1000000000000} (= 1.0e+12) (Short: \p{Nv= 1000000000000}) (2: U+5146, U+16B61) \p{Numeric_Value: NaN} (Short: \p{Nv=NaN}) (1_112_250 plus all above-Unicode code points: [\x00-\x20! \"#\$\%&\'\(\)*+,\-.\/:;<=>?\@A-Z\[\\\] \^_`a-z\{\|\}~\x7f-\xb1\xb4-\xb8\xba- \xbb\xbf-\xff], U+0100..065F, U+066A..06EF, U+06FA..07BF, U+07CA..0965, U+0970..09E5 ...) \p{Nushu} \p{Script_Extensions=Nushu} (Short: \p{Nshu}; NOT \p{Block=Nushu}) (397) \p{Nv: *} \p{Numeric_Value: *} \p{Nyiakeng_Puachue_Hmong} \p{Script_Extensions= Nyiakeng_Puachue_Hmong} (Short: \p{Hmnp}; NOT \p{Block= Nyiakeng_Puachue_Hmong}) (71) X \p{OCR} \p{Optical_Character_Recognition} (= \p{Block=Optical_Character_Recognition}) (32) \p{Ogam} \p{Ogham} (= \p{Script_Extensions=Ogham}) (NOT \p{Block=Ogham}) (29) \p{Ogham} \p{Script_Extensions=Ogham} (Short: \p{Ogam}; NOT \p{Block=Ogham}) (29) \p{Ol_Chiki} \p{Script_Extensions=Ol_Chiki} (Short: \p{Olck}) (48) \p{Olck} \p{Ol_Chiki} (= \p{Script_Extensions= Ol_Chiki}) (48) \p{Old_Hungarian} \p{Script_Extensions=Old_Hungarian} (Short: \p{Hung}; NOT \p{Block= Old_Hungarian}) (108) \p{Old_Italic} \p{Script_Extensions=Old_Italic} (Short: \p{Ital}; NOT \p{Block=Old_Italic}) (39) \p{Old_North_Arabian} \p{Script_Extensions=Old_North_Arabian} (Short: \p{Narb}) (32) \p{Old_Permic} \p{Script_Extensions=Old_Permic} (Short: \p{Perm}; NOT \p{Block=Old_Permic}) (44) \p{Old_Persian} \p{Script_Extensions=Old_Persian} (Short: \p{Xpeo}; NOT \p{Block=Old_Persian}) (50) \p{Old_Sogdian} \p{Script_Extensions=Old_Sogdian} (Short: \p{Sogo}; NOT \p{Block=Old_Sogdian}) (40) \p{Old_South_Arabian} \p{Script_Extensions=Old_South_Arabian} (Short: \p{Sarb}) (32) \p{Old_Turkic} \p{Script_Extensions=Old_Turkic} (Short: \p{Orkh}; NOT \p{Block=Old_Turkic}) (73) \p{Open_Punctuation} \p{General_Category=Open_Punctuation} (Short: \p{Ps}) (75) X \p{Optical_Character_Recognition} \p{Block= Optical_Character_Recognition} (Short: \p{InOCR}) (32) \p{Oriya} \p{Script_Extensions=Oriya} (Short: \p{Orya}; NOT \p{Block=Oriya}) (97) \p{Orkh} \p{Old_Turkic} (= \p{Script_Extensions= Old_Turkic}) (NOT \p{Block=Old_Turkic}) (73) X \p{Ornamental_Dingbats} \p{Block=Ornamental_Dingbats} (48) \p{Orya} \p{Oriya} (= \p{Script_Extensions=Oriya}) (NOT \p{Block=Oriya}) (97) \p{Osage} \p{Script_Extensions=Osage} (Short: \p{Osge}; NOT \p{Block=Osage}) (72) \p{Osge} \p{Osage} (= \p{Script_Extensions=Osage}) (NOT \p{Block=Osage}) (72) \p{Osma} \p{Osmanya} (= \p{Script_Extensions= Osmanya}) (NOT \p{Block=Osmanya}) (40) \p{Osmanya} \p{Script_Extensions=Osmanya} (Short: \p{Osma}; NOT \p{Block=Osmanya}) (40) \p{Other} \p{General_Category=Other} (Short: \p{C}) (970_414 plus all above-Unicode code points) \p{Other_Letter} \p{General_Category=Other_Letter} (Short: \p{Lo}) (127_004) \p{Other_Number} \p{General_Category=Other_Number} (Short: \p{No}) (895) \p{Other_Punctuation} \p{General_Category=Other_Punctuation} (Short: \p{Po}) (593) \p{Other_Symbol} \p{General_Category=Other_Symbol} (Short: \p{So}) (6431) X \p{Ottoman_Siyaq_Numbers} \p{Block=Ottoman_Siyaq_Numbers} (80) \p{P} \pP \p{Punct} (= \p{General_Category= Punctuation}) (NOT \p{General_Punctuation}) (798) \p{Pahawh_Hmong} \p{Script_Extensions=Pahawh_Hmong} (Short: \p{Hmng}; NOT \p{Block=Pahawh_Hmong}) (127) \p{Palm} \p{Palmyrene} (= \p{Script_Extensions= Palmyrene}) (32) \p{Palmyrene} \p{Script_Extensions=Palmyrene} (Short: \p{Palm}) (32) \p{Paragraph_Separator} \p{General_Category=Paragraph_Separator} (Short: \p{Zp}) (1) \p{Pat_Syn} \p{Pattern_Syntax} (= \p{Pattern_Syntax= Y}) (2760) \p{Pat_Syn: *} \p{Pattern_Syntax: *} \p{Pat_WS} \p{Pattern_White_Space} (= \p{Pattern_White_Space=Y}) (11) \p{Pat_WS: *} \p{Pattern_White_Space: *} \p{Pattern_Syntax} \p{Pattern_Syntax=Y} (Short: \p{PatSyn}) (2760) \p{Pattern_Syntax: N*} (Short: \p{PatSyn=N}, \P{PatSyn}) (1_111_352 plus all above-Unicode code points: [\x00-\x200-9A-Z_a-z\x7f-\xa0 \xa8\xaa\xad\xaf\xb2-\xb5\xb7-\xba\xbc- \xbe\xc0-\xd6\xd8-\xf6\xf8-\xff], U+0100..200F, U+2028..202F, U+203F..2040, U+2054, U+205F..218F ...) \p{Pattern_Syntax: Y*} (Short: \p{PatSyn=Y}, \p{PatSyn}) (2760: [!\"#\$\%&\'\(\)*+,\-.\/:;<=>?\@\[\\\] \^`\{\|\}~\xa1-\xa7\xa9\xab-\xac\xae \xb0-\xb1\xb6\xbb\xbf\xd7\xf7], U+2010..2027, U+2030..203E, U+2041..2053, U+2055..205E, U+2190..245F ...) \p{Pattern_White_Space} \p{Pattern_White_Space=Y} (Short: \p{PatWS}) (11) \p{Pattern_White_Space: N*} (Short: \p{PatWS=N}, \P{PatWS}) (1_114_101 plus all above-Unicode code points: [^\t\n\cK\f\r\x20\x85], U+0100..200D, U+2010..2027, U+202A..infinity) \p{Pattern_White_Space: Y*} (Short: \p{PatWS=Y}, \p{PatWS}) (11: [\t\n\cK\f\r\x20\x85], U+200E..200F, U+2028..2029) \p{Pau_Cin_Hau} \p{Script_Extensions=Pau_Cin_Hau} (Short: \p{Pauc}; NOT \p{Block=Pau_Cin_Hau}) (57) \p{Pauc} \p{Pau_Cin_Hau} (= \p{Script_Extensions= Pau_Cin_Hau}) (NOT \p{Block= Pau_Cin_Hau}) (57) \p{Pc} \p{Connector_Punctuation} (= \p{General_Category= Connector_Punctuation}) (10) \p{PCM} \p{Prepended_Concatenation_Mark} (= \p{Prepended_Concatenation_Mark=Y}) (11) \p{PCM: *} \p{Prepended_Concatenation_Mark: *} \p{Pd} \p{Dash_Punctuation} (= \p{General_Category=Dash_Punctuation}) (25) \p{Pe} \p{Close_Punctuation} (= \p{General_Category=Close_Punctuation}) (73) \p{PerlSpace} \p{PosixSpace} (6) \p{PerlWord} \p{PosixWord} (63) \p{Perm} \p{Old_Permic} (= \p{Script_Extensions= Old_Permic}) (NOT \p{Block=Old_Permic}) (44) \p{Pf} \p{Final_Punctuation} (= \p{General_Category=Final_Punctuation}) (10) \p{Phag} \p{Phags_Pa} (= \p{Script_Extensions= Phags_Pa}) (NOT \p{Block=Phags_Pa}) (59) \p{Phags_Pa} \p{Script_Extensions=Phags_Pa} (Short: \p{Phag}; NOT \p{Block=Phags_Pa}) (59) X \p{Phaistos} \p{Phaistos_Disc} (= \p{Block= Phaistos_Disc}) (48) X \p{Phaistos_Disc} \p{Block=Phaistos_Disc} (Short: \p{InPhaistos}) (48) \p{Phli} \p{Inscriptional_Pahlavi} (= \p{Script_Extensions= Inscriptional_Pahlavi}) (NOT \p{Block= Inscriptional_Pahlavi}) (27) \p{Phlp} \p{Psalter_Pahlavi} (= \p{Script_Extensions=Psalter_Pahlavi}) (NOT \p{Block=Psalter_Pahlavi}) (30) \p{Phnx} \p{Phoenician} (= \p{Script_Extensions= Phoenician}) (NOT \p{Block=Phoenician}) (29) \p{Phoenician} \p{Script_Extensions=Phoenician} (Short: \p{Phnx}; NOT \p{Block=Phoenician}) (29) X \p{Phonetic_Ext} \p{Phonetic_Extensions} (= \p{Block= Phonetic_Extensions}) (128) X \p{Phonetic_Ext_Sup} \p{Phonetic_Extensions_Supplement} (= \p{Block= Phonetic_Extensions_Supplement}) (64) X \p{Phonetic_Extensions} \p{Block=Phonetic_Extensions} (Short: \p{InPhoneticExt}) (128) X \p{Phonetic_Extensions_Supplement} \p{Block= Phonetic_Extensions_Supplement} (Short: \p{InPhoneticExtSup}) (64) \p{Pi} \p{Initial_Punctuation} (= \p{General_Category= Initial_Punctuation}) (12) X \p{Playing_Cards} \p{Block=Playing_Cards} (96) \p{Plrd} \p{Miao} (= \p{Script_Extensions=Miao}) (NOT \p{Block=Miao}) (149) \p{Po} \p{Other_Punctuation} (= \p{General_Category=Other_Punctuation}) (593) \p{PosixAlnum} (62: [0-9A-Za-z]) \p{PosixAlpha} (52: [A-Za-z]) \p{PosixBlank} (2: [\t\x20]) \p{PosixCntrl} ASCII control characters (33: ACK, BEL, BS, CAN, CR, DC1, DC2, DC3, DC4, DEL, DLE, ENQ, EOM, EOT, ESC, ETB, ETX, FF, FS, GS, HT, LF, NAK, NUL, RS, SI, SO, SOH, STX, SUB, SYN, US, VT) \p{PosixDigit} (10: [0-9]) \p{PosixGraph} (94: [!\"#\$\%&\'\(\)*+,\-.\/0-9:;<=>?\@A- Z\[\\\]\^_`a-z\{\|\}~]) \p{PosixLower} (/i= PosixAlpha) (26: [a-z]) \p{PosixPrint} (95: [\x20-\x7e]) \p{PosixPunct} (32: [!\"#\$\%&\'\(\)*+,\-.\/:;<=>?\@ \[\\\]\^_`\{\|\}~]) \p{PosixSpace} (Short: \p{PerlSpace}) (6: [\t\n\cK\f\r \x20]) \p{PosixUpper} (/i= PosixAlpha) (26: [A-Z]) \p{PosixWord} \w, restricted to ASCII (Short: \p{PerlWord}) (63: [0-9A-Z_a-z]) \p{PosixXDigit} \p{ASCII_Hex_Digit=Y} (Short: \p{AHex}) (22) \p{Prepended_Concatenation_Mark} \p{Prepended_Concatenation_Mark= Y} (Short: \p{PCM}) (11) \p{Prepended_Concatenation_Mark: N*} (Short: \p{PCM=N}, \P{PCM}) (1_114_101 plus all above-Unicode code points: U+0000..05FF, U+0606..06DC, U+06DE..070E, U+0710..08E1, U+08E3..110BC, U+110BE..110CC ...) \p{Prepended_Concatenation_Mark: Y*} (Short: \p{PCM=Y}, \p{PCM}) (11: U+0600..0605, U+06DD, U+070F, U+08E2, U+110BD, U+110CD) T \p{Present_In: 1.1} \p{Age=V1_1} (Short: \p{In=1.1}) (Perl extension) (33_979) T \p{Present_In: 2.0} Code point's usage introduced in version 2.0 or earlier (Short: \p{In=2.0}) (Perl extension) (178_500: U+0000..01F5, U+01FA..0217, U+0250..02A8, U+02B0..02DE, U+02E0..02E9, U+0300..0345 ...) \p{Present_In: V2_0} \p{Present_In=2.0} (Perl extension) (178_500) T \p{Present_In: 2.1} Code point's usage introduced in version 2.1 or earlier (Short: \p{In=2.1}) (Perl extension) (178_502: U+0000..01F5, U+01FA..0217, U+0250..02A8, U+02B0..02DE, U+02E0..02E9, U+0300..0345 ...) \p{Present_In: V2_1} \p{Present_In=2.1} (Perl extension) (178_502) T \p{Present_In: 3.0} Code point's usage introduced in version 3.0 or earlier (Short: \p{In=3.0}) (Perl extension) (188_809: U+0000..021F, U+0222..0233, U+0250..02AD, U+02B0..02EE, U+0300..034E, U+0360..0362 ...) \p{Present_In: V3_0} \p{Present_In=3.0} (Perl extension) (188_809) T \p{Present_In: 3.1} Code point's usage introduced in version 3.1 or earlier (Short: \p{In=3.1}) (Perl extension) (233_787: U+0000..021F, U+0222..0233, U+0250..02AD, U+02B0..02EE, U+0300..034E, U+0360..0362 ...) \p{Present_In: V3_1} \p{Present_In=3.1} (Perl extension) (233_787) T \p{Present_In: 3.2} Code point's usage introduced in version 3.2 or earlier (Short: \p{In=3.2}) (Perl extension) (234_803: U+0000..0220, U+0222..0233, U+0250..02AD, U+02B0..02EE, U+0300..034F, U+0360..036F ...) \p{Present_In: V3_2} \p{Present_In=3.2} (Perl extension) (234_803) T \p{Present_In: 4.0} Code point's usage introduced in version 4.0 or earlier (Short: \p{In=4.0}) (Perl extension) (236_029: U+0000..0236, U+0250..0357, U+035D..036F, U+0374..0375, U+037A, U+037E ...) \p{Present_In: V4_0} \p{Present_In=4.0} (Perl extension) (236_029) T \p{Present_In: 4.1} Code point's usage introduced in version 4.1 or earlier (Short: \p{In=4.1}) (Perl extension) (237_302: U+0000..0241, U+0250..036F, U+0374..0375, U+037A, U+037E, U+0384..038A ...) \p{Present_In: V4_1} \p{Present_In=4.1} (Perl extension) (237_302) T \p{Present_In: 5.0} Code point's usage introduced in version 5.0 or earlier (Short: \p{In=5.0}) (Perl extension) (238_671: U+0000..036F, U+0374..0375, U+037A..037E, U+0384..038A, U+038C, U+038E..03A1 ...) \p{Present_In: V5_0} \p{Present_In=5.0} (Perl extension) (238_671) T \p{Present_In: 5.1} Code point's usage introduced in version 5.1 or earlier (Short: \p{In=5.1}) (Perl extension) (240_295: U+0000..0377, U+037A..037E, U+0384..038A, U+038C, U+038E..03A1, U+03A3..0523 ...) \p{Present_In: V5_1} \p{Present_In=5.1} (Perl extension) (240_295) T \p{Present_In: 5.2} Code point's usage introduced in version 5.2 or earlier (Short: \p{In=5.2}) (Perl extension) (246_943: U+0000..0377, U+037A..037E, U+0384..038A, U+038C, U+038E..03A1, U+03A3..0525 ...) \p{Present_In: V5_2} \p{Present_In=5.2} (Perl extension) (246_943) T \p{Present_In: 6.0} Code point's usage introduced in version 6.0 or earlier (Short: \p{In=6.0}) (Perl extension) (249_031: U+0000..0377, U+037A..037E, U+0384..038A, U+038C, U+038E..03A1, U+03A3..0527 ...) \p{Present_In: V6_0} \p{Present_In=6.0} (Perl extension) (249_031) T \p{Present_In: 6.1} Code point's usage introduced in version 6.1 or earlier (Short: \p{In=6.1}) (Perl extension) (249_763: U+0000..0377, U+037A..037E, U+0384..038A, U+038C, U+038E..03A1, U+03A3..0527 ...) \p{Present_In: V6_1} \p{Present_In=6.1} (Perl extension) (249_763) T \p{Present_In: 6.2} Code point's usage introduced in version 6.2 or earlier (Short: \p{In=6.2}) (Perl extension) (249_764: U+0000..0377, U+037A..037E, U+0384..038A, U+038C, U+038E..03A1, U+03A3..0527 ...) \p{Present_In: V6_2} \p{Present_In=6.2} (Perl extension) (249_764) T \p{Present_In: 6.3} Code point's usage introduced in version 6.3 or earlier (Short: \p{In=6.3}) (Perl extension) (249_769: U+0000..0377, U+037A..037E, U+0384..038A, U+038C, U+038E..03A1, U+03A3..0527 ...) \p{Present_In: V6_3} \p{Present_In=6.3} (Perl extension) (249_769) T \p{Present_In: 7.0} Code point's usage introduced in version 7.0 or earlier (Short: \p{In=7.0}) (Perl extension) (252_603: U+0000..0377, U+037A..037F, U+0384..038A, U+038C, U+038E..03A1, U+03A3..052F ...) \p{Present_In: V7_0} \p{Present_In=7.0} (Perl extension) (252_603) T \p{Present_In: 8.0} Code point's usage introduced in version 8.0 or earlier (Short: \p{In=8.0}) (Perl extension) (260_319: U+0000..0377, U+037A..037F, U+0384..038A, U+038C, U+038E..03A1, U+03A3..052F ...) \p{Present_In: V8_0} \p{Present_In=8.0} (Perl extension) (260_319) T \p{Present_In: 9.0} Code point's usage introduced in version 9.0 or earlier (Short: \p{In=9.0}) (Perl extension) (267_819: U+0000..0377, U+037A..037F, U+0384..038A, U+038C, U+038E..03A1, U+03A3..052F ...) \p{Present_In: V9_0} \p{Present_In=9.0} (Perl extension) (267_819) T \p{Present_In: 10.0} Code point's usage introduced in version 10.0 or earlier (Short: \p{In=10.0}) (Perl extension) (276_337: U+0000..0377, U+037A..037F, U+0384..038A, U+038C, U+038E..03A1, U+03A3..052F ...) \p{Present_In: V10_0} \p{Present_In=10.0} (Perl extension) (276_337) T \p{Present_In: 11.0} Code point's usage introduced in version 11.0 or earlier (Short: \p{In=11.0}) (Perl extension) (277_021: U+0000..0377, U+037A..037F, U+0384..038A, U+038C, U+038E..03A1, U+03A3..052F ...) \p{Present_In: V11_0} \p{Present_In=11.0} (Perl extension) (277_021) T \p{Present_In: 12.0} Code point's usage introduced in version 12.0 or earlier (Short: \p{In=12.0}) (Perl extension) (277_575: U+0000..0377, U+037A..037F, U+0384..038A, U+038C, U+038E..03A1, U+03A3..052F ...) \p{Present_In: V12_0} \p{Present_In=12.0} (Perl extension) (277_575) T \p{Present_In: 12.1} Code point's usage introduced in version 12.1 or earlier (Short: \p{In=12.1}) (Perl extension) (277_576: U+0000..0377, U+037A..037F, U+0384..038A, U+038C, U+038E..03A1, U+03A3..052F ...) \p{Present_In: V12_1} \p{Present_In=12.1} (Perl extension) (277_576) T \p{Present_In: 13.0} Code point's usage introduced in version 13.0 or earlier (Short: \p{In=13.0}) (Perl extension) (283_506: U+0000..0377, U+037A..037F, U+0384..038A, U+038C, U+038E..03A1, U+03A3..052F ...) \p{Present_In: V13_0} \p{Present_In=13.0} (Perl extension) (283_506) \p{Present_In: Unassigned} \p{Age=Unassigned} (Short: \p{In= Unassigned}) (Perl extension) (830_606 plus all above-Unicode code points) \p{Print} \p{XPosixPrint} (281_325) \p{Private_Use} \p{General_Category=Private_Use} (Short: \p{Co}; NOT \p{Private_Use_Area}) (137_468) X \p{Private_Use_Area} \p{Block=Private_Use_Area} (Short: \p{InPUA}) (6400) \p{Prti} \p{Inscriptional_Parthian} (= \p{Script_Extensions= Inscriptional_Parthian}) (NOT \p{Block= Inscriptional_Parthian}) (30) \p{Ps} \p{Open_Punctuation} (= \p{General_Category=Open_Punctuation}) (75) \p{Psalter_Pahlavi} \p{Script_Extensions=Psalter_Pahlavi} (Short: \p{Phlp}; NOT \p{Block= Psalter_Pahlavi}) (30) X \p{PUA} \p{Private_Use_Area} (= \p{Block= Private_Use_Area}) (6400) \p{Punct} \p{General_Category=Punctuation} (Short: \p{P}; NOT \p{General_Punctuation}) (798) \p{Punctuation} \p{Punct} (= \p{General_Category= Punctuation}) (NOT \p{General_Punctuation}) (798) \p{Qaac} \p{Coptic} (= \p{Script_Extensions= Coptic}) (NOT \p{Block=Coptic}) (165) \p{Qaai} \p{Inherited} (= \p{Script_Extensions= Inherited}) (503) \p{QMark} \p{Quotation_Mark} (= \p{Quotation_Mark= Y}) (30) \p{QMark: *} \p{Quotation_Mark: *} \p{Quotation_Mark} \p{Quotation_Mark=Y} (Short: \p{QMark}) (30) \p{Quotation_Mark: N*} (Short: \p{QMark=N}, \P{QMark}) (1_114_082 plus all above-Unicode code points: [\x00-\x20!#\$\%&\(\)*+,\-.\/0-9:;<=>? \@A-Z\[\\\]\^_`a-z\{\|\}~\x7f-\xaa\xac- \xba\xbc-\xff], U+0100..2017, U+2020..2038, U+203B..2E41, U+2E43..300B, U+3010..301C ...) \p{Quotation_Mark: Y*} (Short: \p{QMark=Y}, \p{QMark}) (30: [\" \'\xab\xbb], U+2018..201F, U+2039..203A, U+2E42, U+300C..300F, U+301D..301F ...) \p{Radical} \p{Radical=Y} (329) \p{Radical: N*} (Single: \P{Radical}) (1_113_783 plus all above-Unicode code points: U+0000..2E7F, U+2E9A, U+2EF4..2EFF, U+2FD6..infinity) \p{Radical: Y*} (Single: \p{Radical}) (329: U+2E80..2E99, U+2E9B..2EF3, U+2F00..2FD5) \p{Regional_Indicator} \p{Regional_Indicator=Y} (Short: \p{RI}) (26) \p{Regional_Indicator: N*} (Short: \p{RI=N}, \P{RI}) (1_114_086 plus all above-Unicode code points: U+0000..1F1E5, U+1F200..infinity) \p{Regional_Indicator: Y*} (Short: \p{RI=Y}, \p{RI}) (26: U+1F1E6..1F1FF) \p{Rejang} \p{Script_Extensions=Rejang} (Short: \p{Rjng}; NOT \p{Block=Rejang}) (37) \p{RI} \p{Regional_Indicator} (= \p{Regional_Indicator=Y}) (26) \p{RI: *} \p{Regional_Indicator: *} \p{Rjng} \p{Rejang} (= \p{Script_Extensions= Rejang}) (NOT \p{Block=Rejang}) (37) \p{Rohg} \p{Hanifi_Rohingya} (= \p{Script_Extensions=Hanifi_Rohingya}) (NOT \p{Block=Hanifi_Rohingya}) (55) X \p{Rumi} \p{Rumi_Numeral_Symbols} (= \p{Block= Rumi_Numeral_Symbols}) (32) X \p{Rumi_Numeral_Symbols} \p{Block=Rumi_Numeral_Symbols} (Short: \p{InRumi}) (32) \p{Runic} \p{Script_Extensions=Runic} (Short: \p{Runr}; NOT \p{Block=Runic}) (86) \p{Runr} \p{Runic} (= \p{Script_Extensions=Runic}) (NOT \p{Block=Runic}) (86) \p{S} \pS \p{Symbol} (= \p{General_Category=Symbol}) (7564) \p{Samaritan} \p{Script_Extensions=Samaritan} (Short: \p{Samr}; NOT \p{Block=Samaritan}) (61) \p{Samr} \p{Samaritan} (= \p{Script_Extensions= Samaritan}) (NOT \p{Block=Samaritan}) (61) \p{Sarb} \p{Old_South_Arabian} (= \p{Script_Extensions=Old_South_Arabian}) (32) \p{Saur} \p{Saurashtra} (= \p{Script_Extensions= Saurashtra}) (NOT \p{Block=Saurashtra}) (82) \p{Saurashtra} \p{Script_Extensions=Saurashtra} (Short: \p{Saur}; NOT \p{Block=Saurashtra}) (82) \p{SB: *} \p{Sentence_Break: *} \p{Sc} \p{Currency_Symbol} (= \p{General_Category=Currency_Symbol}) (62) \p{Sc: *} \p{Script: *} \p{Script: Adlam} (Short: \p{Sc=Adlm}) (88: U+1E900..1E94B, U+1E950..1E959, U+1E95E..1E95F) \p{Script: Adlm} \p{Script=Adlam} (88) \p{Script: Aghb} \p{Script=Caucasian_Albanian} (= \p{Script_Extensions= Caucasian_Albanian}) (53) \p{Script: Ahom} \p{Script_Extensions=Ahom} (Short: \p{Sc= Ahom}, \p{Ahom}) (58) \p{Script: Anatolian_Hieroglyphs} \p{Script_Extensions= Anatolian_Hieroglyphs} (Short: \p{Sc= Hluw}, \p{Hluw}) (583) \p{Script: Arab} \p{Script=Arabic} (1291) \p{Script: Arabic} (Short: \p{Sc=Arab}) (1291: U+0600..0604, U+0606..060B, U+060D..061A, U+061C, U+061E, U+0620..063F ...) \p{Script: Armenian} \p{Script_Extensions=Armenian} (Short: \p{Sc=Armn}, \p{Armn}) (96) \p{Script: Armi} \p{Script=Imperial_Aramaic} (= \p{Script_Extensions=Imperial_Aramaic}) (31) \p{Script: Armn} \p{Script=Armenian} (= \p{Script_Extensions=Armenian}) (96) \p{Script: Avestan} \p{Script_Extensions=Avestan} (Short: \p{Sc=Avst}, \p{Avst}) (61) \p{Script: Avst} \p{Script=Avestan} (= \p{Script_Extensions=Avestan}) (61) \p{Script: Bali} \p{Script=Balinese} (= \p{Script_Extensions=Balinese}) (121) \p{Script: Balinese} \p{Script_Extensions=Balinese} (Short: \p{Sc=Bali}, \p{Bali}) (121) \p{Script: Bamu} \p{Script=Bamum} (= \p{Script_Extensions= Bamum}) (657) \p{Script: Bamum} \p{Script_Extensions=Bamum} (Short: \p{Sc= Bamu}, \p{Bamu}) (657) \p{Script: Bass} \p{Script=Bassa_Vah} (= \p{Script_Extensions=Bassa_Vah}) (36) \p{Script: Bassa_Vah} \p{Script_Extensions=Bassa_Vah} (Short: \p{Sc=Bass}, \p{Bass}) (36) \p{Script: Batak} \p{Script_Extensions=Batak} (Short: \p{Sc= Batk}, \p{Batk}) (56) \p{Script: Batk} \p{Script=Batak} (= \p{Script_Extensions= Batak}) (56) \p{Script: Beng} \p{Script=Bengali} (96) \p{Script: Bengali} (Short: \p{Sc=Beng}) (96: U+0980..0983, U+0985..098C, U+098F..0990, U+0993..09A8, U+09AA..09B0, U+09B2 ...) \p{Script: Bhaiksuki} \p{Script_Extensions=Bhaiksuki} (Short: \p{Sc=Bhks}, \p{Bhks}) (97) \p{Script: Bhks} \p{Script=Bhaiksuki} (= \p{Script_Extensions=Bhaiksuki}) (97) \p{Script: Bopo} \p{Script=Bopomofo} (77) \p{Script: Bopomofo} (Short: \p{Sc=Bopo}) (77: U+02EA..02EB, U+3105..312F, U+31A0..31BF) \p{Script: Brah} \p{Script=Brahmi} (= \p{Script_Extensions= Brahmi}) (109) \p{Script: Brahmi} \p{Script_Extensions=Brahmi} (Short: \p{Sc=Brah}, \p{Brah}) (109) \p{Script: Brai} \p{Script=Braille} (= \p{Script_Extensions=Braille}) (256) \p{Script: Braille} \p{Script_Extensions=Braille} (Short: \p{Sc=Brai}, \p{Brai}) (256) \p{Script: Bugi} \p{Script=Buginese} (30) \p{Script: Buginese} (Short: \p{Sc=Bugi}) (30: U+1A00..1A1B, U+1A1E..1A1F) \p{Script: Buhd} \p{Script=Buhid} (20) \p{Script: Buhid} (Short: \p{Sc=Buhd}) (20: U+1740..1753) \p{Script: Cakm} \p{Script=Chakma} (71) \p{Script: Canadian_Aboriginal} \p{Script_Extensions= Canadian_Aboriginal} (Short: \p{Sc= Cans}, \p{Cans}) (710) \p{Script: Cans} \p{Script=Canadian_Aboriginal} (= \p{Script_Extensions= Canadian_Aboriginal}) (710) \p{Script: Cari} \p{Script=Carian} (= \p{Script_Extensions= Carian}) (49) \p{Script: Carian} \p{Script_Extensions=Carian} (Short: \p{Sc=Cari}, \p{Cari}) (49) \p{Script: Caucasian_Albanian} \p{Script_Extensions= Caucasian_Albanian} (Short: \p{Sc=Aghb}, \p{Aghb}) (53) \p{Script: Chakma} (Short: \p{Sc=Cakm}) (71: U+11100..11134, U+11136..11147) \p{Script: Cham} \p{Script_Extensions=Cham} (Short: \p{Sc= Cham}, \p{Cham}) (83) \p{Script: Cher} \p{Script=Cherokee} (= \p{Script_Extensions=Cherokee}) (172) \p{Script: Cherokee} \p{Script_Extensions=Cherokee} (Short: \p{Sc=Cher}, \p{Cher}) (172) \p{Script: Chorasmian} \p{Script_Extensions=Chorasmian} (Short: \p{Sc=Chrs}, \p{Chrs}) (28) \p{Script: Chrs} \p{Script=Chorasmian} (= \p{Script_Extensions=Chorasmian}) (28) \p{Script: Common} (Short: \p{Sc=Zyyy}) (8087: [\x00-\x20! \"#\$\%&\'\(\)*+,\-.\/0-9:;<=>?\@\[\\\] \^_`\{\|\}~\x7f-\xa9\xab-\xb9\xbb-\xbf \xd7\xf7], U+02B9..02DF, U+02E5..02E9, U+02EC..02FF, U+0374, U+037E ...) \p{Script: Copt} \p{Script=Coptic} (137) \p{Script: Coptic} (Short: \p{Sc=Copt}) (137: U+03E2..03EF, U+2C80..2CF3, U+2CF9..2CFF) \p{Script: Cprt} \p{Script=Cypriot} (55) \p{Script: Cuneiform} \p{Script_Extensions=Cuneiform} (Short: \p{Sc=Xsux}, \p{Xsux}) (1234) \p{Script: Cypriot} (Short: \p{Sc=Cprt}) (55: U+10800..10805, U+10808, U+1080A..10835, U+10837..10838, U+1083C, U+1083F) \p{Script: Cyrillic} (Short: \p{Sc=Cyrl}) (443: U+0400..0484, U+0487..052F, U+1C80..1C88, U+1D2B, U+1D78, U+2DE0..2DFF ...) \p{Script: Cyrl} \p{Script=Cyrillic} (443) \p{Script: Deseret} \p{Script_Extensions=Deseret} (Short: \p{Sc=Dsrt}, \p{Dsrt}) (80) \p{Script: Deva} \p{Script=Devanagari} (154) \p{Script: Devanagari} (Short: \p{Sc=Deva}) (154: U+0900..0950, U+0955..0963, U+0966..097F, U+A8E0..A8FF) \p{Script: Diak} \p{Script=Dives_Akuru} (= \p{Script_Extensions=Dives_Akuru}) (72) \p{Script: Dives_Akuru} \p{Script_Extensions=Dives_Akuru} (Short: \p{Sc=Diak}, \p{Diak}) (72) \p{Script: Dogr} \p{Script=Dogra} (60) \p{Script: Dogra} (Short: \p{Sc=Dogr}) (60: U+11800..1183B) \p{Script: Dsrt} \p{Script=Deseret} (= \p{Script_Extensions=Deseret}) (80) \p{Script: Dupl} \p{Script=Duployan} (143) \p{Script: Duployan} (Short: \p{Sc=Dupl}) (143: U+1BC00..1BC6A, U+1BC70..1BC7C, U+1BC80..1BC88, U+1BC90..1BC99, U+1BC9C..1BC9F) \p{Script: Egyp} \p{Script=Egyptian_Hieroglyphs} (= \p{Script_Extensions= Egyptian_Hieroglyphs}) (1080) \p{Script: Egyptian_Hieroglyphs} \p{Script_Extensions= Egyptian_Hieroglyphs} (Short: \p{Sc= Egyp}, \p{Egyp}) (1080) \p{Script: Elba} \p{Script=Elbasan} (= \p{Script_Extensions=Elbasan}) (40) \p{Script: Elbasan} \p{Script_Extensions=Elbasan} (Short: \p{Sc=Elba}, \p{Elba}) (40) \p{Script: Elym} \p{Script=Elymaic} (= \p{Script_Extensions=Elymaic}) (23) \p{Script: Elymaic} \p{Script_Extensions=Elymaic} (Short: \p{Sc=Elym}, \p{Elym}) (23) \p{Script: Ethi} \p{Script=Ethiopic} (= \p{Script_Extensions=Ethiopic}) (495) \p{Script: Ethiopic} \p{Script_Extensions=Ethiopic} (Short: \p{Sc=Ethi}, \p{Ethi}) (495) \p{Script: Geor} \p{Script=Georgian} (173) \p{Script: Georgian} (Short: \p{Sc=Geor}) (173: U+10A0..10C5, U+10C7, U+10CD, U+10D0..10FA, U+10FC..10FF, U+1C90..1CBA ...) \p{Script: Glag} \p{Script=Glagolitic} (132) \p{Script: Glagolitic} (Short: \p{Sc=Glag}) (132: U+2C00..2C2E, U+2C30..2C5E, U+1E000..1E006, U+1E008..1E018, U+1E01B..1E021, U+1E023..1E024 ...) \p{Script: Gong} \p{Script=Gunjala_Gondi} (63) \p{Script: Gonm} \p{Script=Masaram_Gondi} (75) \p{Script: Goth} \p{Script=Gothic} (= \p{Script_Extensions= Gothic}) (27) \p{Script: Gothic} \p{Script_Extensions=Gothic} (Short: \p{Sc=Goth}, \p{Goth}) (27) \p{Script: Gran} \p{Script=Grantha} (85) \p{Script: Grantha} (Short: \p{Sc=Gran}) (85: U+11300..11303, U+11305..1130C, U+1130F..11310, U+11313..11328, U+1132A..11330, U+11332..11333 ...) \p{Script: Greek} (Short: \p{Sc=Grek}) (518: U+0370..0373, U+0375..0377, U+037A..037D, U+037F, U+0384, U+0386 ...) \p{Script: Grek} \p{Script=Greek} (518) \p{Script: Gujarati} (Short: \p{Sc=Gujr}) (91: U+0A81..0A83, U+0A85..0A8D, U+0A8F..0A91, U+0A93..0AA8, U+0AAA..0AB0, U+0AB2..0AB3 ...) \p{Script: Gujr} \p{Script=Gujarati} (91) \p{Script: Gunjala_Gondi} (Short: \p{Sc=Gong}) (63: U+11D60..11D65, U+11D67..11D68, U+11D6A..11D8E, U+11D90..11D91, U+11D93..11D98, U+11DA0..11DA9) \p{Script: Gurmukhi} (Short: \p{Sc=Guru}) (80: U+0A01..0A03, U+0A05..0A0A, U+0A0F..0A10, U+0A13..0A28, U+0A2A..0A30, U+0A32..0A33 ...) \p{Script: Guru} \p{Script=Gurmukhi} (80) \p{Script: Han} (Short: \p{Sc=Han}) (94_204: U+2E80..2E99, U+2E9B..2EF3, U+2F00..2FD5, U+3005, U+3007, U+3021..3029 ...) \p{Script: Hang} \p{Script=Hangul} (11_739) \p{Script: Hangul} (Short: \p{Sc=Hang}) (11_739: U+1100..11FF, U+302E..302F, U+3131..318E, U+3200..321E, U+3260..327E, U+A960..A97C ...) \p{Script: Hani} \p{Script=Han} (94_204) \p{Script: Hanifi_Rohingya} (Short: \p{Sc=Rohg}) (50: U+10D00..10D27, U+10D30..10D39) \p{Script: Hano} \p{Script=Hanunoo} (21) \p{Script: Hanunoo} (Short: \p{Sc=Hano}) (21: U+1720..1734) \p{Script: Hatr} \p{Script=Hatran} (= \p{Script_Extensions= Hatran}) (26) \p{Script: Hatran} \p{Script_Extensions=Hatran} (Short: \p{Sc=Hatr}, \p{Hatr}) (26) \p{Script: Hebr} \p{Script=Hebrew} (= \p{Script_Extensions= Hebrew}) (134) \p{Script: Hebrew} \p{Script_Extensions=Hebrew} (Short: \p{Sc=Hebr}, \p{Hebr}) (134) \p{Script: Hira} \p{Script=Hiragana} (379) \p{Script: Hiragana} (Short: \p{Sc=Hira}) (379: U+3041..3096, U+309D..309F, U+1B001..1B11E, U+1B150..1B152, U+1F200) \p{Script: Hluw} \p{Script=Anatolian_Hieroglyphs} (= \p{Script_Extensions= Anatolian_Hieroglyphs}) (583) \p{Script: Hmng} \p{Script=Pahawh_Hmong} (= \p{Script_Extensions=Pahawh_Hmong}) (127) \p{Script: Hmnp} \p{Script=Nyiakeng_Puachue_Hmong} (= \p{Script_Extensions= Nyiakeng_Puachue_Hmong}) (71) \p{Script: Hung} \p{Script=Old_Hungarian} (= \p{Script_Extensions=Old_Hungarian}) (108) \p{Script: Imperial_Aramaic} \p{Script_Extensions= Imperial_Aramaic} (Short: \p{Sc=Armi}, \p{Armi}) (31) \p{Script: Inherited} (Short: \p{Sc=Zinh}) (573: U+0300..036F, U+0485..0486, U+064B..0655, U+0670, U+0951..0954, U+1AB0..1AC0 ...) \p{Script: Inscriptional_Pahlavi} \p{Script_Extensions= Inscriptional_Pahlavi} (Short: \p{Sc= Phli}, \p{Phli}) (27) \p{Script: Inscriptional_Parthian} \p{Script_Extensions= Inscriptional_Parthian} (Short: \p{Sc= Prti}, \p{Prti}) (30) \p{Script: Ital} \p{Script=Old_Italic} (= \p{Script_Extensions=Old_Italic}) (39) \p{Script: Java} \p{Script=Javanese} (90) \p{Script: Javanese} (Short: \p{Sc=Java}) (90: U+A980..A9CD, U+A9D0..A9D9, U+A9DE..A9DF) \p{Script: Kaithi} (Short: \p{Sc=Kthi}) (67: U+11080..110C1, U+110CD) \p{Script: Kali} \p{Script=Kayah_Li} (47) \p{Script: Kana} \p{Script=Katakana} (304) \p{Script: Kannada} (Short: \p{Sc=Knda}) (89: U+0C80..0C8C, U+0C8E..0C90, U+0C92..0CA8, U+0CAA..0CB3, U+0CB5..0CB9, U+0CBC..0CC4 ...) \p{Script: Katakana} (Short: \p{Sc=Kana}) (304: U+30A1..30FA, U+30FD..30FF, U+31F0..31FF, U+32D0..32FE, U+3300..3357, U+FF66..FF6F ...) \p{Script: Kayah_Li} (Short: \p{Sc=Kali}) (47: U+A900..A92D, U+A92F) \p{Script: Khar} \p{Script=Kharoshthi} (= \p{Script_Extensions=Kharoshthi}) (68) \p{Script: Kharoshthi} \p{Script_Extensions=Kharoshthi} (Short: \p{Sc=Khar}, \p{Khar}) (68) \p{Script: Khitan_Small_Script} \p{Script_Extensions= Khitan_Small_Script} (Short: \p{Sc= Kits}, \p{Kits}) (471) \p{Script: Khmer} \p{Script_Extensions=Khmer} (Short: \p{Sc= Khmr}, \p{Khmr}) (146) \p{Script: Khmr} \p{Script=Khmer} (= \p{Script_Extensions= Khmer}) (146) \p{Script: Khoj} \p{Script=Khojki} (62) \p{Script: Khojki} (Short: \p{Sc=Khoj}) (62: U+11200..11211, U+11213..1123E) \p{Script: Khudawadi} (Short: \p{Sc=Sind}) (69: U+112B0..112EA, U+112F0..112F9) \p{Script: Kits} \p{Script=Khitan_Small_Script} (= \p{Script_Extensions= Khitan_Small_Script}) (471) \p{Script: Knda} \p{Script=Kannada} (89) \p{Script: Kthi} \p{Script=Kaithi} (67) \p{Script: Lana} \p{Script=Tai_Tham} (= \p{Script_Extensions=Tai_Tham}) (127) \p{Script: Lao} \p{Script_Extensions=Lao} (Short: \p{Sc= Lao}, \p{Lao}) (82) \p{Script: Laoo} \p{Script=Lao} (= \p{Script_Extensions= Lao}) (82) \p{Script: Latin} (Short: \p{Sc=Latn}) (1374: [A-Za-z\xaa \xba\xc0-\xd6\xd8-\xf6\xf8-\xff], U+0100..02B8, U+02E0..02E4, U+1D00..1D25, U+1D2C..1D5C, U+1D62..1D65 ...) \p{Script: Latn} \p{Script=Latin} (1374) \p{Script: Lepc} \p{Script=Lepcha} (= \p{Script_Extensions= Lepcha}) (74) \p{Script: Lepcha} \p{Script_Extensions=Lepcha} (Short: \p{Sc=Lepc}, \p{Lepc}) (74) \p{Script: Limb} \p{Script=Limbu} (68) \p{Script: Limbu} (Short: \p{Sc=Limb}) (68: U+1900..191E, U+1920..192B, U+1930..193B, U+1940, U+1944..194F) \p{Script: Lina} \p{Script=Linear_A} (341) \p{Script: Linb} \p{Script=Linear_B} (211) \p{Script: Linear_A} (Short: \p{Sc=Lina}) (341: U+10600..10736, U+10740..10755, U+10760..10767) \p{Script: Linear_B} (Short: \p{Sc=Linb}) (211: U+10000..1000B, U+1000D..10026, U+10028..1003A, U+1003C..1003D, U+1003F..1004D, U+10050..1005D ...) \p{Script: Lisu} \p{Script_Extensions=Lisu} (Short: \p{Sc= Lisu}, \p{Lisu}) (49) \p{Script: Lyci} \p{Script=Lycian} (= \p{Script_Extensions= Lycian}) (29) \p{Script: Lycian} \p{Script_Extensions=Lycian} (Short: \p{Sc=Lyci}, \p{Lyci}) (29) \p{Script: Lydi} \p{Script=Lydian} (= \p{Script_Extensions= Lydian}) (27) \p{Script: Lydian} \p{Script_Extensions=Lydian} (Short: \p{Sc=Lydi}, \p{Lydi}) (27) \p{Script: Mahajani} (Short: \p{Sc=Mahj}) (39: U+11150..11176) \p{Script: Mahj} \p{Script=Mahajani} (39) \p{Script: Maka} \p{Script=Makasar} (= \p{Script_Extensions=Makasar}) (25) \p{Script: Makasar} \p{Script_Extensions=Makasar} (Short: \p{Sc=Maka}, \p{Maka}) (25) \p{Script: Malayalam} (Short: \p{Sc=Mlym}) (118: U+0D00..0D0C, U+0D0E..0D10, U+0D12..0D44, U+0D46..0D48, U+0D4A..0D4F, U+0D54..0D63 ...) \p{Script: Mand} \p{Script=Mandaic} (29) \p{Script: Mandaic} (Short: \p{Sc=Mand}) (29: U+0840..085B, U+085E) \p{Script: Mani} \p{Script=Manichaean} (51) \p{Script: Manichaean} (Short: \p{Sc=Mani}) (51: U+10AC0..10AE6, U+10AEB..10AF6) \p{Script: Marc} \p{Script=Marchen} (= \p{Script_Extensions=Marchen}) (68) \p{Script: Marchen} \p{Script_Extensions=Marchen} (Short: \p{Sc=Marc}, \p{Marc}) (68) \p{Script: Masaram_Gondi} (Short: \p{Sc=Gonm}) (75: U+11D00..11D06, U+11D08..11D09, U+11D0B..11D36, U+11D3A, U+11D3C..11D3D, U+11D3F..11D47 ...) \p{Script: Medefaidrin} \p{Script_Extensions=Medefaidrin} (Short: \p{Sc=Medf}, \p{Medf}) (91) \p{Script: Medf} \p{Script=Medefaidrin} (= \p{Script_Extensions=Medefaidrin}) (91) \p{Script: Meetei_Mayek} \p{Script_Extensions=Meetei_Mayek} (Short: \p{Sc=Mtei}, \p{Mtei}) (79) \p{Script: Mend} \p{Script=Mende_Kikakui} (= \p{Script_Extensions=Mende_Kikakui}) (213) \p{Script: Mende_Kikakui} \p{Script_Extensions=Mende_Kikakui} (Short: \p{Sc=Mend}, \p{Mend}) (213) \p{Script: Merc} \p{Script=Meroitic_Cursive} (= \p{Script_Extensions=Meroitic_Cursive}) (90) \p{Script: Mero} \p{Script=Meroitic_Hieroglyphs} (= \p{Script_Extensions= Meroitic_Hieroglyphs}) (32) \p{Script: Meroitic_Cursive} \p{Script_Extensions= Meroitic_Cursive} (Short: \p{Sc=Merc}, \p{Merc}) (90) \p{Script: Meroitic_Hieroglyphs} \p{Script_Extensions= Meroitic_Hieroglyphs} (Short: \p{Sc= Mero}, \p{Mero}) (32) \p{Script: Miao} \p{Script_Extensions=Miao} (Short: \p{Sc= Miao}, \p{Miao}) (149) \p{Script: Mlym} \p{Script=Malayalam} (118) \p{Script: Modi} (Short: \p{Sc=Modi}) (79: U+11600..11644, U+11650..11659) \p{Script: Mong} \p{Script=Mongolian} (167) \p{Script: Mongolian} (Short: \p{Sc=Mong}) (167: U+1800..1801, U+1804, U+1806..180E, U+1810..1819, U+1820..1878, U+1880..18AA ...) \p{Script: Mro} \p{Script_Extensions=Mro} (Short: \p{Sc= Mro}, \p{Mro}) (43) \p{Script: Mroo} \p{Script=Mro} (= \p{Script_Extensions= Mro}) (43) \p{Script: Mtei} \p{Script=Meetei_Mayek} (= \p{Script_Extensions=Meetei_Mayek}) (79) \p{Script: Mult} \p{Script=Multani} (38) \p{Script: Multani} (Short: \p{Sc=Mult}) (38: U+11280..11286, U+11288, U+1128A..1128D, U+1128F..1129D, U+1129F..112A9) \p{Script: Myanmar} (Short: \p{Sc=Mymr}) (223: U+1000..109F, U+A9E0..A9FE, U+AA60..AA7F) \p{Script: Mymr} \p{Script=Myanmar} (223) \p{Script: Nabataean} \p{Script_Extensions=Nabataean} (Short: \p{Sc=Nbat}, \p{Nbat}) (40) \p{Script: Nand} \p{Script=Nandinagari} (65) \p{Script: Nandinagari} (Short: \p{Sc=Nand}) (65: U+119A0..119A7, U+119AA..119D7, U+119DA..119E4) \p{Script: Narb} \p{Script=Old_North_Arabian} (= \p{Script_Extensions=Old_North_Arabian}) (32) \p{Script: Nbat} \p{Script=Nabataean} (= \p{Script_Extensions=Nabataean}) (40) \p{Script: New_Tai_Lue} \p{Script_Extensions=New_Tai_Lue} (Short: \p{Sc=Talu}, \p{Talu}) (83) \p{Script: Newa} \p{Script_Extensions=Newa} (Short: \p{Sc= Newa}, \p{Newa}) (97) \p{Script: Nko} \p{Script_Extensions=Nko} (Short: \p{Sc= Nko}, \p{Nko}) (62) \p{Script: Nkoo} \p{Script=Nko} (= \p{Script_Extensions= Nko}) (62) \p{Script: Nshu} \p{Script=Nushu} (= \p{Script_Extensions= Nushu}) (397) \p{Script: Nushu} \p{Script_Extensions=Nushu} (Short: \p{Sc= Nshu}, \p{Nshu}) (397) \p{Script: Nyiakeng_Puachue_Hmong} \p{Script_Extensions= Nyiakeng_Puachue_Hmong} (Short: \p{Sc= Hmnp}, \p{Hmnp}) (71) \p{Script: Ogam} \p{Script=Ogham} (= \p{Script_Extensions= Ogham}) (29) \p{Script: Ogham} \p{Script_Extensions=Ogham} (Short: \p{Sc= Ogam}, \p{Ogam}) (29) \p{Script: Ol_Chiki} \p{Script_Extensions=Ol_Chiki} (Short: \p{Sc=Olck}, \p{Olck}) (48) \p{Script: Olck} \p{Script=Ol_Chiki} (= \p{Script_Extensions=Ol_Chiki}) (48) \p{Script: Old_Hungarian} \p{Script_Extensions=Old_Hungarian} (Short: \p{Sc=Hung}, \p{Hung}) (108) \p{Script: Old_Italic} \p{Script_Extensions=Old_Italic} (Short: \p{Sc=Ital}, \p{Ital}) (39) \p{Script: Old_North_Arabian} \p{Script_Extensions= Old_North_Arabian} (Short: \p{Sc=Narb}, \p{Narb}) (32) \p{Script: Old_Permic} (Short: \p{Sc=Perm}) (43: U+10350..1037A) \p{Script: Old_Persian} \p{Script_Extensions=Old_Persian} (Short: \p{Sc=Xpeo}, \p{Xpeo}) (50) \p{Script: Old_Sogdian} \p{Script_Extensions=Old_Sogdian} (Short: \p{Sc=Sogo}, \p{Sogo}) (40) \p{Script: Old_South_Arabian} \p{Script_Extensions= Old_South_Arabian} (Short: \p{Sc=Sarb}, \p{Sarb}) (32) \p{Script: Old_Turkic} \p{Script_Extensions=Old_Turkic} (Short: \p{Sc=Orkh}, \p{Orkh}) (73) \p{Script: Oriya} (Short: \p{Sc=Orya}) (91: U+0B01..0B03, U+0B05..0B0C, U+0B0F..0B10, U+0B13..0B28, U+0B2A..0B30, U+0B32..0B33 ...) \p{Script: Orkh} \p{Script=Old_Turkic} (= \p{Script_Extensions=Old_Turkic}) (73) \p{Script: Orya} \p{Script=Oriya} (91) \p{Script: Osage} \p{Script_Extensions=Osage} (Short: \p{Sc= Osge}, \p{Osge}) (72) \p{Script: Osge} \p{Script=Osage} (= \p{Script_Extensions= Osage}) (72) \p{Script: Osma} \p{Script=Osmanya} (= \p{Script_Extensions=Osmanya}) (40) \p{Script: Osmanya} \p{Script_Extensions=Osmanya} (Short: \p{Sc=Osma}, \p{Osma}) (40) \p{Script: Pahawh_Hmong} \p{Script_Extensions=Pahawh_Hmong} (Short: \p{Sc=Hmng}, \p{Hmng}) (127) \p{Script: Palm} \p{Script=Palmyrene} (= \p{Script_Extensions=Palmyrene}) (32) \p{Script: Palmyrene} \p{Script_Extensions=Palmyrene} (Short: \p{Sc=Palm}, \p{Palm}) (32) \p{Script: Pau_Cin_Hau} \p{Script_Extensions=Pau_Cin_Hau} (Short: \p{Sc=Pauc}, \p{Pauc}) (57) \p{Script: Pauc} \p{Script=Pau_Cin_Hau} (= \p{Script_Extensions=Pau_Cin_Hau}) (57) \p{Script: Perm} \p{Script=Old_Permic} (43) \p{Script: Phag} \p{Script=Phags_Pa} (56) \p{Script: Phags_Pa} (Short: \p{Sc=Phag}) (56: U+A840..A877) \p{Script: Phli} \p{Script=Inscriptional_Pahlavi} (= \p{Script_Extensions= Inscriptional_Pahlavi}) (27) \p{Script: Phlp} \p{Script=Psalter_Pahlavi} (29) \p{Script: Phnx} \p{Script=Phoenician} (= \p{Script_Extensions=Phoenician}) (29) \p{Script: Phoenician} \p{Script_Extensions=Phoenician} (Short: \p{Sc=Phnx}, \p{Phnx}) (29) \p{Script: Plrd} \p{Script=Miao} (= \p{Script_Extensions= Miao}) (149) \p{Script: Prti} \p{Script=Inscriptional_Parthian} (= \p{Script_Extensions= Inscriptional_Parthian}) (30) \p{Script: Psalter_Pahlavi} (Short: \p{Sc=Phlp}) (29: U+10B80..10B91, U+10B99..10B9C, U+10BA9..10BAF) \p{Script: Qaac} \p{Script=Coptic} (137) \p{Script: Qaai} \p{Script=Inherited} (573) \p{Script: Rejang} \p{Script_Extensions=Rejang} (Short: \p{Sc=Rjng}, \p{Rjng}) (37) \p{Script: Rjng} \p{Script=Rejang} (= \p{Script_Extensions= Rejang}) (37) \p{Script: Rohg} \p{Script=Hanifi_Rohingya} (50) \p{Script: Runic} \p{Script_Extensions=Runic} (Short: \p{Sc= Runr}, \p{Runr}) (86) \p{Script: Runr} \p{Script=Runic} (= \p{Script_Extensions= Runic}) (86) \p{Script: Samaritan} \p{Script_Extensions=Samaritan} (Short: \p{Sc=Samr}, \p{Samr}) (61) \p{Script: Samr} \p{Script=Samaritan} (= \p{Script_Extensions=Samaritan}) (61) \p{Script: Sarb} \p{Script=Old_South_Arabian} (= \p{Script_Extensions=Old_South_Arabian}) (32) \p{Script: Saur} \p{Script=Saurashtra} (= \p{Script_Extensions=Saurashtra}) (82) \p{Script: Saurashtra} \p{Script_Extensions=Saurashtra} (Short: \p{Sc=Saur}, \p{Saur}) (82) \p{Script: Sgnw} \p{Script=SignWriting} (= \p{Script_Extensions=SignWriting}) (672) \p{Script: Sharada} (Short: \p{Sc=Shrd}) (96: U+11180..111DF) \p{Script: Shavian} \p{Script_Extensions=Shavian} (Short: \p{Sc=Shaw}, \p{Shaw}) (48) \p{Script: Shaw} \p{Script=Shavian} (= \p{Script_Extensions=Shavian}) (48) \p{Script: Shrd} \p{Script=Sharada} (96) \p{Script: Sidd} \p{Script=Siddham} (= \p{Script_Extensions=Siddham}) (92) \p{Script: Siddham} \p{Script_Extensions=Siddham} (Short: \p{Sc=Sidd}, \p{Sidd}) (92) \p{Script: SignWriting} \p{Script_Extensions=SignWriting} (Short: \p{Sc=Sgnw}, \p{Sgnw}) (672) \p{Script: Sind} \p{Script=Khudawadi} (69) \p{Script: Sinh} \p{Script=Sinhala} (111) \p{Script: Sinhala} (Short: \p{Sc=Sinh}) (111: U+0D81..0D83, U+0D85..0D96, U+0D9A..0DB1, U+0DB3..0DBB, U+0DBD, U+0DC0..0DC6 ...) \p{Script: Sogd} \p{Script=Sogdian} (42) \p{Script: Sogdian} (Short: \p{Sc=Sogd}) (42: U+10F30..10F59) \p{Script: Sogo} \p{Script=Old_Sogdian} (= \p{Script_Extensions=Old_Sogdian}) (40) \p{Script: Sora} \p{Script=Sora_Sompeng} (= \p{Script_Extensions=Sora_Sompeng}) (35) \p{Script: Sora_Sompeng} \p{Script_Extensions=Sora_Sompeng} (Short: \p{Sc=Sora}, \p{Sora}) (35) \p{Script: Soyo} \p{Script=Soyombo} (= \p{Script_Extensions=Soyombo}) (83) \p{Script: Soyombo} \p{Script_Extensions=Soyombo} (Short: \p{Sc=Soyo}, \p{Soyo}) (83) \p{Script: Sund} \p{Script=Sundanese} (= \p{Script_Extensions=Sundanese}) (72) \p{Script: Sundanese} \p{Script_Extensions=Sundanese} (Short: \p{Sc=Sund}, \p{Sund}) (72) \p{Script: Sylo} \p{Script=Syloti_Nagri} (45) \p{Script: Syloti_Nagri} (Short: \p{Sc=Sylo}) (45: U+A800..A82C) \p{Script: Syrc} \p{Script=Syriac} (88) \p{Script: Syriac} (Short: \p{Sc=Syrc}) (88: U+0700..070D, U+070F..074A, U+074D..074F, U+0860..086A) \p{Script: Tagalog} (Short: \p{Sc=Tglg}) (20: U+1700..170C, U+170E..1714) \p{Script: Tagb} \p{Script=Tagbanwa} (18) \p{Script: Tagbanwa} (Short: \p{Sc=Tagb}) (18: U+1760..176C, U+176E..1770, U+1772..1773) \p{Script: Tai_Le} (Short: \p{Sc=Tale}) (35: U+1950..196D, U+1970..1974) \p{Script: Tai_Tham} \p{Script_Extensions=Tai_Tham} (Short: \p{Sc=Lana}, \p{Lana}) (127) \p{Script: Tai_Viet} \p{Script_Extensions=Tai_Viet} (Short: \p{Sc=Tavt}, \p{Tavt}) (72) \p{Script: Takr} \p{Script=Takri} (67) \p{Script: Takri} (Short: \p{Sc=Takr}) (67: U+11680..116B8, U+116C0..116C9) \p{Script: Tale} \p{Script=Tai_Le} (35) \p{Script: Talu} \p{Script=New_Tai_Lue} (= \p{Script_Extensions=New_Tai_Lue}) (83) \p{Script: Tamil} (Short: \p{Sc=Taml}) (123: U+0B82..0B83, U+0B85..0B8A, U+0B8E..0B90, U+0B92..0B95, U+0B99..0B9A, U+0B9C ...) \p{Script: Taml} \p{Script=Tamil} (123) \p{Script: Tang} \p{Script=Tangut} (= \p{Script_Extensions= Tangut}) (6914) \p{Script: Tangut} \p{Script_Extensions=Tangut} (Short: \p{Sc=Tang}, \p{Tang}) (6914) \p{Script: Tavt} \p{Script=Tai_Viet} (= \p{Script_Extensions=Tai_Viet}) (72) \p{Script: Telu} \p{Script=Telugu} (98) \p{Script: Telugu} (Short: \p{Sc=Telu}) (98: U+0C00..0C0C, U+0C0E..0C10, U+0C12..0C28, U+0C2A..0C39, U+0C3D..0C44, U+0C46..0C48 ...) \p{Script: Tfng} \p{Script=Tifinagh} (= \p{Script_Extensions=Tifinagh}) (59) \p{Script: Tglg} \p{Script=Tagalog} (20) \p{Script: Thaa} \p{Script=Thaana} (50) \p{Script: Thaana} (Short: \p{Sc=Thaa}) (50: U+0780..07B1) \p{Script: Thai} \p{Script_Extensions=Thai} (Short: \p{Sc= Thai}, \p{Thai}) (86) \p{Script: Tibetan} \p{Script_Extensions=Tibetan} (Short: \p{Sc=Tibt}, \p{Tibt}) (207) \p{Script: Tibt} \p{Script=Tibetan} (= \p{Script_Extensions=Tibetan}) (207) \p{Script: Tifinagh} \p{Script_Extensions=Tifinagh} (Short: \p{Sc=Tfng}, \p{Tfng}) (59) \p{Script: Tirh} \p{Script=Tirhuta} (82) \p{Script: Tirhuta} (Short: \p{Sc=Tirh}) (82: U+11480..114C7, U+114D0..114D9) \p{Script: Ugar} \p{Script=Ugaritic} (= \p{Script_Extensions=Ugaritic}) (31) \p{Script: Ugaritic} \p{Script_Extensions=Ugaritic} (Short: \p{Sc=Ugar}, \p{Ugar}) (31) \p{Script: Unknown} \p{Script_Extensions=Unknown} (Short: \p{Sc=Zzzz}, \p{Zzzz}) (970_188 plus all above-Unicode code points) \p{Script: Vai} \p{Script_Extensions=Vai} (Short: \p{Sc= Vai}, \p{Vai}) (300) \p{Script: Vaii} \p{Script=Vai} (= \p{Script_Extensions= Vai}) (300) \p{Script: Wancho} \p{Script_Extensions=Wancho} (Short: \p{Sc=Wcho}, \p{Wcho}) (59) \p{Script: Wara} \p{Script=Warang_Citi} (= \p{Script_Extensions=Warang_Citi}) (84) \p{Script: Warang_Citi} \p{Script_Extensions=Warang_Citi} (Short: \p{Sc=Wara}, \p{Wara}) (84) \p{Script: Wcho} \p{Script=Wancho} (= \p{Script_Extensions= Wancho}) (59) \p{Script: Xpeo} \p{Script=Old_Persian} (= \p{Script_Extensions=Old_Persian}) (50) \p{Script: Xsux} \p{Script=Cuneiform} (= \p{Script_Extensions=Cuneiform}) (1234) \p{Script: Yezi} \p{Script=Yezidi} (47) \p{Script: Yezidi} (Short: \p{Sc=Yezi}) (47: U+10E80..10EA9, U+10EAB..10EAD, U+10EB0..10EB1) \p{Script: Yi} (Short: \p{Sc=Yi}) (1220: U+A000..A48C, U+A490..A4C6) \p{Script: Yiii} \p{Script=Yi} (1220) \p{Script: Zanabazar_Square} \p{Script_Extensions= Zanabazar_Square} (Short: \p{Sc=Zanb}, \p{Zanb}) (72) \p{Script: Zanb} \p{Script=Zanabazar_Square} (= \p{Script_Extensions=Zanabazar_Square}) (72) \p{Script: Zinh} \p{Script=Inherited} (573) \p{Script: Zyyy} \p{Script=Common} (8087) \p{Script: Zzzz} \p{Script=Unknown} (= \p{Script_Extensions=Unknown}) (970_188 plus all above-Unicode code points) \p{Script_Extensions: Adlam} (Short: \p{Scx=Adlm}, \p{Adlm}) (89: U+0640, U+1E900..1E94B, U+1E950..1E959, U+1E95E..1E95F) \p{Script_Extensions: Adlm} \p{Script_Extensions=Adlam} (89) \p{Script_Extensions: Aghb} \p{Script_Extensions= Caucasian_Albanian} (53) \p{Script_Extensions: Ahom} (Short: \p{Scx=Ahom}, \p{Ahom}) (58: U+11700..1171A, U+1171D..1172B, U+11730..1173F) \p{Script_Extensions: Anatolian_Hieroglyphs} (Short: \p{Scx=Hluw}, \p{Hluw}) (583: U+14400..14646) \p{Script_Extensions: Arab} \p{Script_Extensions=Arabic} (1335) \p{Script_Extensions: Arabic} (Short: \p{Scx=Arab}, \p{Arab}) (1335: U+0600..0604, U+0606..061C, U+061E..06DC, U+06DE..06FF, U+0750..077F, U+08A0..08B4 ...) \p{Script_Extensions: Armenian} (Short: \p{Scx=Armn}, \p{Armn}) (96: U+0531..0556, U+0559..058A, U+058D..058F, U+FB13..FB17) \p{Script_Extensions: Armi} \p{Script_Extensions=Imperial_Aramaic} (31) \p{Script_Extensions: Armn} \p{Script_Extensions=Armenian} (96) \p{Script_Extensions: Avestan} (Short: \p{Scx=Avst}, \p{Avst}) (61: U+10B00..10B35, U+10B39..10B3F) \p{Script_Extensions: Avst} \p{Script_Extensions=Avestan} (61) \p{Script_Extensions: Bali} \p{Script_Extensions=Balinese} (121) \p{Script_Extensions: Balinese} (Short: \p{Scx=Bali}, \p{Bali}) (121: U+1B00..1B4B, U+1B50..1B7C) \p{Script_Extensions: Bamu} \p{Script_Extensions=Bamum} (657) \p{Script_Extensions: Bamum} (Short: \p{Scx=Bamu}, \p{Bamu}) (657: U+A6A0..A6F7, U+16800..16A38) \p{Script_Extensions: Bass} \p{Script_Extensions=Bassa_Vah} (36) \p{Script_Extensions: Bassa_Vah} (Short: \p{Scx=Bass}, \p{Bass}) (36: U+16AD0..16AED, U+16AF0..16AF5) \p{Script_Extensions: Batak} (Short: \p{Scx=Batk}, \p{Batk}) (56: U+1BC0..1BF3, U+1BFC..1BFF) \p{Script_Extensions: Batk} \p{Script_Extensions=Batak} (56) \p{Script_Extensions: Beng} \p{Script_Extensions=Bengali} (113) \p{Script_Extensions: Bengali} (Short: \p{Scx=Beng}, \p{Beng}) (113: U+0951..0952, U+0964..0965, U+0980..0983, U+0985..098C, U+098F..0990, U+0993..09A8 ...) \p{Script_Extensions: Bhaiksuki} (Short: \p{Scx=Bhks}, \p{Bhks}) (97: U+11C00..11C08, U+11C0A..11C36, U+11C38..11C45, U+11C50..11C6C) \p{Script_Extensions: Bhks} \p{Script_Extensions=Bhaiksuki} (97) \p{Script_Extensions: Bopo} \p{Script_Extensions=Bopomofo} (117) \p{Script_Extensions: Bopomofo} (Short: \p{Scx=Bopo}, \p{Bopo}) (117: U+02EA..02EB, U+3001..3003, U+3008..3011, U+3013..301F, U+302A..302D, U+3030 ...) \p{Script_Extensions: Brah} \p{Script_Extensions=Brahmi} (109) \p{Script_Extensions: Brahmi} (Short: \p{Scx=Brah}, \p{Brah}) (109: U+11000..1104D, U+11052..1106F, U+1107F) \p{Script_Extensions: Brai} \p{Script_Extensions=Braille} (256) \p{Script_Extensions: Braille} (Short: \p{Scx=Brai}, \p{Brai}) (256: U+2800..28FF) \p{Script_Extensions: Bugi} \p{Script_Extensions=Buginese} (31) \p{Script_Extensions: Buginese} (Short: \p{Scx=Bugi}, \p{Bugi}) (31: U+1A00..1A1B, U+1A1E..1A1F, U+A9CF) \p{Script_Extensions: Buhd} \p{Script_Extensions=Buhid} (22) \p{Script_Extensions: Buhid} (Short: \p{Scx=Buhd}, \p{Buhd}) (22: U+1735..1736, U+1740..1753) \p{Script_Extensions: Cakm} \p{Script_Extensions=Chakma} (91) \p{Script_Extensions: Canadian_Aboriginal} (Short: \p{Scx=Cans}, \p{Cans}) (710: U+1400..167F, U+18B0..18F5) \p{Script_Extensions: Cans} \p{Script_Extensions= Canadian_Aboriginal} (710) \p{Script_Extensions: Cari} \p{Script_Extensions=Carian} (49) \p{Script_Extensions: Carian} (Short: \p{Scx=Cari}, \p{Cari}) (49: U+102A0..102D0) \p{Script_Extensions: Caucasian_Albanian} (Short: \p{Scx=Aghb}, \p{Aghb}) (53: U+10530..10563, U+1056F) \p{Script_Extensions: Chakma} (Short: \p{Scx=Cakm}, \p{Cakm}) (91: U+09E6..09EF, U+1040..1049, U+11100..11134, U+11136..11147) \p{Script_Extensions: Cham} (Short: \p{Scx=Cham}, \p{Cham}) (83: U+AA00..AA36, U+AA40..AA4D, U+AA50..AA59, U+AA5C..AA5F) \p{Script_Extensions: Cher} \p{Script_Extensions=Cherokee} (172) \p{Script_Extensions: Cherokee} (Short: \p{Scx=Cher}, \p{Cher}) (172: U+13A0..13F5, U+13F8..13FD, U+AB70..ABBF) \p{Script_Extensions: Chorasmian} (Short: \p{Scx=Chrs}, \p{Chrs}) (28: U+10FB0..10FCB) \p{Script_Extensions: Chrs} \p{Script_Extensions=Chorasmian} (28) \p{Script_Extensions: Common} (Short: \p{Scx=Zyyy}, \p{Zyyy}) (7661: [\x00-\x20!\"#\$\%&\'\(\)*+,\-. \/0-9:;<=>?\@\[\\\]\^_`\{\|\}~\x7f-\xa9 \xab-\xb9\xbb-\xbf\xd7\xf7], U+02B9..02DF, U+02E5..02E9, U+02EC..02FF, U+0374, U+037E ...) \p{Script_Extensions: Copt} \p{Script_Extensions=Coptic} (165) \p{Script_Extensions: Coptic} (Short: \p{Scx=Copt}, \p{Copt}) (165: U+03E2..03EF, U+2C80..2CF3, U+2CF9..2CFF, U+102E0..102FB) \p{Script_Extensions: Cprt} \p{Script_Extensions=Cypriot} (112) \p{Script_Extensions: Cuneiform} (Short: \p{Scx=Xsux}, \p{Xsux}) (1234: U+12000..12399, U+12400..1246E, U+12470..12474, U+12480..12543) \p{Script_Extensions: Cypriot} (Short: \p{Scx=Cprt}, \p{Cprt}) (112: U+10100..10102, U+10107..10133, U+10137..1013F, U+10800..10805, U+10808, U+1080A..10835 ...) \p{Script_Extensions: Cyrillic} (Short: \p{Scx=Cyrl}, \p{Cyrl}) (447: U+0400..052F, U+1C80..1C88, U+1D2B, U+1D78, U+1DF8, U+2DE0..2DFF ...) \p{Script_Extensions: Cyrl} \p{Script_Extensions=Cyrillic} (447) \p{Script_Extensions: Deseret} (Short: \p{Scx=Dsrt}, \p{Dsrt}) (80: U+10400..1044F) \p{Script_Extensions: Deva} \p{Script_Extensions=Devanagari} (210) \p{Script_Extensions: Devanagari} (Short: \p{Scx=Deva}, \p{Deva}) (210: U+0900..0952, U+0955..097F, U+1CD0..1CF6, U+1CF8..1CF9, U+20F0, U+A830..A839 ...) \p{Script_Extensions: Diak} \p{Script_Extensions=Dives_Akuru} (72) \p{Script_Extensions: Dives_Akuru} (Short: \p{Scx=Diak}, \p{Diak}) (72: U+11900..11906, U+11909, U+1190C..11913, U+11915..11916, U+11918..11935, U+11937..11938 ...) \p{Script_Extensions: Dogr} \p{Script_Extensions=Dogra} (82) \p{Script_Extensions: Dogra} (Short: \p{Scx=Dogr}, \p{Dogr}) (82: U+0964..096F, U+A830..A839, U+11800..1183B) \p{Script_Extensions: Dsrt} \p{Script_Extensions=Deseret} (80) \p{Script_Extensions: Dupl} \p{Script_Extensions=Duployan} (147) \p{Script_Extensions: Duployan} (Short: \p{Scx=Dupl}, \p{Dupl}) (147: U+1BC00..1BC6A, U+1BC70..1BC7C, U+1BC80..1BC88, U+1BC90..1BC99, U+1BC9C..1BCA3) \p{Script_Extensions: Egyp} \p{Script_Extensions= Egyptian_Hieroglyphs} (1080) \p{Script_Extensions: Egyptian_Hieroglyphs} (Short: \p{Scx=Egyp}, \p{Egyp}) (1080: U+13000..1342E, U+13430..13438) \p{Script_Extensions: Elba} \p{Script_Extensions=Elbasan} (40) \p{Script_Extensions: Elbasan} (Short: \p{Scx=Elba}, \p{Elba}) (40: U+10500..10527) \p{Script_Extensions: Elym} \p{Script_Extensions=Elymaic} (23) \p{Script_Extensions: Elymaic} (Short: \p{Scx=Elym}, \p{Elym}) (23: U+10FE0..10FF6) \p{Script_Extensions: Ethi} \p{Script_Extensions=Ethiopic} (495) \p{Script_Extensions: Ethiopic} (Short: \p{Scx=Ethi}, \p{Ethi}) (495: U+1200..1248, U+124A..124D, U+1250..1256, U+1258, U+125A..125D, U+1260..1288 ...) \p{Script_Extensions: Geor} \p{Script_Extensions=Georgian} (174) \p{Script_Extensions: Georgian} (Short: \p{Scx=Geor}, \p{Geor}) (174: U+10A0..10C5, U+10C7, U+10CD, U+10D0..10FF, U+1C90..1CBA, U+1CBD..1CBF ...) \p{Script_Extensions: Glag} \p{Script_Extensions=Glagolitic} (136) \p{Script_Extensions: Glagolitic} (Short: \p{Scx=Glag}, \p{Glag}) (136: U+0484, U+0487, U+2C00..2C2E, U+2C30..2C5E, U+2E43, U+A66F ...) \p{Script_Extensions: Gong} \p{Script_Extensions=Gunjala_Gondi} (65) \p{Script_Extensions: Gonm} \p{Script_Extensions=Masaram_Gondi} (77) \p{Script_Extensions: Goth} \p{Script_Extensions=Gothic} (27) \p{Script_Extensions: Gothic} (Short: \p{Scx=Goth}, \p{Goth}) (27: U+10330..1034A) \p{Script_Extensions: Gran} \p{Script_Extensions=Grantha} (116) \p{Script_Extensions: Grantha} (Short: \p{Scx=Gran}, \p{Gran}) (116: U+0951..0952, U+0964..0965, U+0BE6..0BF3, U+1CD0, U+1CD2..1CD3, U+1CF2..1CF4 ...) \p{Script_Extensions: Greek} (Short: \p{Scx=Grek}, \p{Grek}) (522: U+0342, U+0345, U+0370..0373, U+0375..0377, U+037A..037D, U+037F ...) \p{Script_Extensions: Grek} \p{Script_Extensions=Greek} (522) \p{Script_Extensions: Gujarati} (Short: \p{Scx=Gujr}, \p{Gujr}) (105: U+0951..0952, U+0964..0965, U+0A81..0A83, U+0A85..0A8D, U+0A8F..0A91, U+0A93..0AA8 ...) \p{Script_Extensions: Gujr} \p{Script_Extensions=Gujarati} (105) \p{Script_Extensions: Gunjala_Gondi} (Short: \p{Scx=Gong}, \p{Gong}) (65: U+0964..0965, U+11D60..11D65, U+11D67..11D68, U+11D6A..11D8E, U+11D90..11D91, U+11D93..11D98 ...) \p{Script_Extensions: Gurmukhi} (Short: \p{Scx=Guru}, \p{Guru}) (94: U+0951..0952, U+0964..0965, U+0A01..0A03, U+0A05..0A0A, U+0A0F..0A10, U+0A13..0A28 ...) \p{Script_Extensions: Guru} \p{Script_Extensions=Gurmukhi} (94) \p{Script_Extensions: Han} (Short: \p{Scx=Han}, \p{Han}) (94_492: U+2E80..2E99, U+2E9B..2EF3, U+2F00..2FD5, U+3001..3003, U+3005..3011, U+3013..301F ...) \p{Script_Extensions: Hang} \p{Script_Extensions=Hangul} (11_775) \p{Script_Extensions: Hangul} (Short: \p{Scx=Hang}, \p{Hang}) (11_775: U+1100..11FF, U+3001..3003, U+3008..3011, U+3013..301F, U+302E..3030, U+3037 ...) \p{Script_Extensions: Hani} \p{Script_Extensions=Han} (94_492) \p{Script_Extensions: Hanifi_Rohingya} (Short: \p{Scx=Rohg}, \p{Rohg}) (55: U+060C, U+061B, U+061F, U+0640, U+06D4, U+10D00..10D27 ...) \p{Script_Extensions: Hano} \p{Script_Extensions=Hanunoo} (23) \p{Script_Extensions: Hanunoo} (Short: \p{Scx=Hano}, \p{Hano}) (23: U+1720..1736) \p{Script_Extensions: Hatr} \p{Script_Extensions=Hatran} (26) \p{Script_Extensions: Hatran} (Short: \p{Scx=Hatr}, \p{Hatr}) (26: U+108E0..108F2, U+108F4..108F5, U+108FB..108FF) \p{Script_Extensions: Hebr} \p{Script_Extensions=Hebrew} (134) \p{Script_Extensions: Hebrew} (Short: \p{Scx=Hebr}, \p{Hebr}) (134: U+0591..05C7, U+05D0..05EA, U+05EF..05F4, U+FB1D..FB36, U+FB38..FB3C, U+FB3E ...) \p{Script_Extensions: Hira} \p{Script_Extensions=Hiragana} (431) \p{Script_Extensions: Hiragana} (Short: \p{Scx=Hira}, \p{Hira}) (431: U+3001..3003, U+3008..3011, U+3013..301F, U+3030..3035, U+3037, U+303C..303D ...) \p{Script_Extensions: Hluw} \p{Script_Extensions= Anatolian_Hieroglyphs} (583) \p{Script_Extensions: Hmng} \p{Script_Extensions=Pahawh_Hmong} (127) \p{Script_Extensions: Hmnp} \p{Script_Extensions= Nyiakeng_Puachue_Hmong} (71) \p{Script_Extensions: Hung} \p{Script_Extensions=Old_Hungarian} (108) \p{Script_Extensions: Imperial_Aramaic} (Short: \p{Scx=Armi}, \p{Armi}) (31: U+10840..10855, U+10857..1085F) \p{Script_Extensions: Inherited} (Short: \p{Scx=Zinh}, \p{Zinh}) (503: U+0300..0341, U+0343..0344, U+0346..0362, U+0953..0954, U+1AB0..1AC0, U+1DC2..1DF7 ...) \p{Script_Extensions: Inscriptional_Pahlavi} (Short: \p{Scx=Phli}, \p{Phli}) (27: U+10B60..10B72, U+10B78..10B7F) \p{Script_Extensions: Inscriptional_Parthian} (Short: \p{Scx= Prti}, \p{Prti}) (30: U+10B40..10B55, U+10B58..10B5F) \p{Script_Extensions: Ital} \p{Script_Extensions=Old_Italic} (39) \p{Script_Extensions: Java} \p{Script_Extensions=Javanese} (91) \p{Script_Extensions: Javanese} (Short: \p{Scx=Java}, \p{Java}) (91: U+A980..A9CD, U+A9CF..A9D9, U+A9DE..A9DF) \p{Script_Extensions: Kaithi} (Short: \p{Scx=Kthi}, \p{Kthi}) (87: U+0966..096F, U+A830..A839, U+11080..110C1, U+110CD) \p{Script_Extensions: Kali} \p{Script_Extensions=Kayah_Li} (48) \p{Script_Extensions: Kana} \p{Script_Extensions=Katakana} (356) \p{Script_Extensions: Kannada} (Short: \p{Scx=Knda}, \p{Knda}) (104: U+0951..0952, U+0964..0965, U+0C80..0C8C, U+0C8E..0C90, U+0C92..0CA8, U+0CAA..0CB3 ...) \p{Script_Extensions: Katakana} (Short: \p{Scx=Kana}, \p{Kana}) (356: U+3001..3003, U+3008..3011, U+3013..301F, U+3030..3035, U+3037, U+303C..303D ...) \p{Script_Extensions: Kayah_Li} (Short: \p{Scx=Kali}, \p{Kali}) (48: U+A900..A92F) \p{Script_Extensions: Khar} \p{Script_Extensions=Kharoshthi} (68) \p{Script_Extensions: Kharoshthi} (Short: \p{Scx=Khar}, \p{Khar}) (68: U+10A00..10A03, U+10A05..10A06, U+10A0C..10A13, U+10A15..10A17, U+10A19..10A35, U+10A38..10A3A ...) \p{Script_Extensions: Khitan_Small_Script} (Short: \p{Scx=Kits}, \p{Kits}) (471: U+16FE4, U+18B00..18CD5) \p{Script_Extensions: Khmer} (Short: \p{Scx=Khmr}, \p{Khmr}) (146: U+1780..17DD, U+17E0..17E9, U+17F0..17F9, U+19E0..19FF) \p{Script_Extensions: Khmr} \p{Script_Extensions=Khmer} (146) \p{Script_Extensions: Khoj} \p{Script_Extensions=Khojki} (82) \p{Script_Extensions: Khojki} (Short: \p{Scx=Khoj}, \p{Khoj}) (82: U+0AE6..0AEF, U+A830..A839, U+11200..11211, U+11213..1123E) \p{Script_Extensions: Khudawadi} (Short: \p{Scx=Sind}, \p{Sind}) (81: U+0964..0965, U+A830..A839, U+112B0..112EA, U+112F0..112F9) \p{Script_Extensions: Kits} \p{Script_Extensions= Khitan_Small_Script} (471) \p{Script_Extensions: Knda} \p{Script_Extensions=Kannada} (104) \p{Script_Extensions: Kthi} \p{Script_Extensions=Kaithi} (87) \p{Script_Extensions: Lana} \p{Script_Extensions=Tai_Tham} (127) \p{Script_Extensions: Lao} (Short: \p{Scx=Lao}, \p{Lao}) (82: U+0E81..0E82, U+0E84, U+0E86..0E8A, U+0E8C..0EA3, U+0EA5, U+0EA7..0EBD ...) \p{Script_Extensions: Laoo} \p{Script_Extensions=Lao} (82) \p{Script_Extensions: Latin} (Short: \p{Scx=Latn}, \p{Latn}) (1403: [A-Za-z\xaa\xba\xc0-\xd6\xd8- \xf6\xf8-\xff], U+0100..02B8, U+02E0..02E4, U+0363..036F, U+0485..0486, U+0951..0952 ...) \p{Script_Extensions: Latn} \p{Script_Extensions=Latin} (1403) \p{Script_Extensions: Lepc} \p{Script_Extensions=Lepcha} (74) \p{Script_Extensions: Lepcha} (Short: \p{Scx=Lepc}, \p{Lepc}) (74: U+1C00..1C37, U+1C3B..1C49, U+1C4D..1C4F) \p{Script_Extensions: Limb} \p{Script_Extensions=Limbu} (69) \p{Script_Extensions: Limbu} (Short: \p{Scx=Limb}, \p{Limb}) (69: U+0965, U+1900..191E, U+1920..192B, U+1930..193B, U+1940, U+1944..194F) \p{Script_Extensions: Lina} \p{Script_Extensions=Linear_A} (386) \p{Script_Extensions: Linb} \p{Script_Extensions=Linear_B} (268) \p{Script_Extensions: Linear_A} (Short: \p{Scx=Lina}, \p{Lina}) (386: U+10107..10133, U+10600..10736, U+10740..10755, U+10760..10767) \p{Script_Extensions: Linear_B} (Short: \p{Scx=Linb}, \p{Linb}) (268: U+10000..1000B, U+1000D..10026, U+10028..1003A, U+1003C..1003D, U+1003F..1004D, U+10050..1005D ...) \p{Script_Extensions: Lisu} (Short: \p{Scx=Lisu}, \p{Lisu}) (49: U+A4D0..A4FF, U+11FB0) \p{Script_Extensions: Lyci} \p{Script_Extensions=Lycian} (29) \p{Script_Extensions: Lycian} (Short: \p{Scx=Lyci}, \p{Lyci}) (29: U+10280..1029C) \p{Script_Extensions: Lydi} \p{Script_Extensions=Lydian} (27) \p{Script_Extensions: Lydian} (Short: \p{Scx=Lydi}, \p{Lydi}) (27: U+10920..10939, U+1093F) \p{Script_Extensions: Mahajani} (Short: \p{Scx=Mahj}, \p{Mahj}) (61: U+0964..096F, U+A830..A839, U+11150..11176) \p{Script_Extensions: Mahj} \p{Script_Extensions=Mahajani} (61) \p{Script_Extensions: Maka} \p{Script_Extensions=Makasar} (25) \p{Script_Extensions: Makasar} (Short: \p{Scx=Maka}, \p{Maka}) (25: U+11EE0..11EF8) \p{Script_Extensions: Malayalam} (Short: \p{Scx=Mlym}, \p{Mlym}) (126: U+0951..0952, U+0964..0965, U+0D00..0D0C, U+0D0E..0D10, U+0D12..0D44, U+0D46..0D48 ...) \p{Script_Extensions: Mand} \p{Script_Extensions=Mandaic} (30) \p{Script_Extensions: Mandaic} (Short: \p{Scx=Mand}, \p{Mand}) (30: U+0640, U+0840..085B, U+085E) \p{Script_Extensions: Mani} \p{Script_Extensions=Manichaean} (52) \p{Script_Extensions: Manichaean} (Short: \p{Scx=Mani}, \p{Mani}) (52: U+0640, U+10AC0..10AE6, U+10AEB..10AF6) \p{Script_Extensions: Marc} \p{Script_Extensions=Marchen} (68) \p{Script_Extensions: Marchen} (Short: \p{Scx=Marc}, \p{Marc}) (68: U+11C70..11C8F, U+11C92..11CA7, U+11CA9..11CB6) \p{Script_Extensions: Masaram_Gondi} (Short: \p{Scx=Gonm}, \p{Gonm}) (77: U+0964..0965, U+11D00..11D06, U+11D08..11D09, U+11D0B..11D36, U+11D3A, U+11D3C..11D3D ...) \p{Script_Extensions: Medefaidrin} (Short: \p{Scx=Medf}, \p{Medf}) (91: U+16E40..16E9A) \p{Script_Extensions: Medf} \p{Script_Extensions=Medefaidrin} (91) \p{Script_Extensions: Meetei_Mayek} (Short: \p{Scx=Mtei}, \p{Mtei}) (79: U+AAE0..AAF6, U+ABC0..ABED, U+ABF0..ABF9) \p{Script_Extensions: Mend} \p{Script_Extensions=Mende_Kikakui} (213) \p{Script_Extensions: Mende_Kikakui} (Short: \p{Scx=Mend}, \p{Mend}) (213: U+1E800..1E8C4, U+1E8C7..1E8D6) \p{Script_Extensions: Merc} \p{Script_Extensions=Meroitic_Cursive} (90) \p{Script_Extensions: Mero} \p{Script_Extensions= Meroitic_Hieroglyphs} (32) \p{Script_Extensions: Meroitic_Cursive} (Short: \p{Scx=Merc}, \p{Merc}) (90: U+109A0..109B7, U+109BC..109CF, U+109D2..109FF) \p{Script_Extensions: Meroitic_Hieroglyphs} (Short: \p{Scx=Mero}, \p{Mero}) (32: U+10980..1099F) \p{Script_Extensions: Miao} (Short: \p{Scx=Miao}, \p{Miao}) (149: U+16F00..16F4A, U+16F4F..16F87, U+16F8F..16F9F) \p{Script_Extensions: Mlym} \p{Script_Extensions=Malayalam} (126) \p{Script_Extensions: Modi} (Short: \p{Scx=Modi}, \p{Modi}) (89: U+A830..A839, U+11600..11644, U+11650..11659) \p{Script_Extensions: Mong} \p{Script_Extensions=Mongolian} (171) \p{Script_Extensions: Mongolian} (Short: \p{Scx=Mong}, \p{Mong}) (171: U+1800..180E, U+1810..1819, U+1820..1878, U+1880..18AA, U+202F, U+11660..1166C) \p{Script_Extensions: Mro} (Short: \p{Scx=Mro}, \p{Mro}) (43: U+16A40..16A5E, U+16A60..16A69, U+16A6E..16A6F) \p{Script_Extensions: Mroo} \p{Script_Extensions=Mro} (43) \p{Script_Extensions: Mtei} \p{Script_Extensions=Meetei_Mayek} (79) \p{Script_Extensions: Mult} \p{Script_Extensions=Multani} (48) \p{Script_Extensions: Multani} (Short: \p{Scx=Mult}, \p{Mult}) (48: U+0A66..0A6F, U+11280..11286, U+11288, U+1128A..1128D, U+1128F..1129D, U+1129F..112A9) \p{Script_Extensions: Myanmar} (Short: \p{Scx=Mymr}, \p{Mymr}) (224: U+1000..109F, U+A92E, U+A9E0..A9FE, U+AA60..AA7F) \p{Script_Extensions: Mymr} \p{Script_Extensions=Myanmar} (224) \p{Script_Extensions: Nabataean} (Short: \p{Scx=Nbat}, \p{Nbat}) (40: U+10880..1089E, U+108A7..108AF) \p{Script_Extensions: Nand} \p{Script_Extensions=Nandinagari} (86) \p{Script_Extensions: Nandinagari} (Short: \p{Scx=Nand}, \p{Nand}) (86: U+0964..0965, U+0CE6..0CEF, U+1CE9, U+1CF2, U+1CFA, U+A830..A835 ...) \p{Script_Extensions: Narb} \p{Script_Extensions= Old_North_Arabian} (32) \p{Script_Extensions: Nbat} \p{Script_Extensions=Nabataean} (40) \p{Script_Extensions: New_Tai_Lue} (Short: \p{Scx=Talu}, \p{Talu}) (83: U+1980..19AB, U+19B0..19C9, U+19D0..19DA, U+19DE..19DF) \p{Script_Extensions: Newa} (Short: \p{Scx=Newa}, \p{Newa}) (97: U+11400..1145B, U+1145D..11461) \p{Script_Extensions: Nko} (Short: \p{Scx=Nko}, \p{Nko}) (62: U+07C0..07FA, U+07FD..07FF) \p{Script_Extensions: Nkoo} \p{Script_Extensions=Nko} (62) \p{Script_Extensions: Nshu} \p{Script_Extensions=Nushu} (397) \p{Script_Extensions: Nushu} (Short: \p{Scx=Nshu}, \p{Nshu}) (397: U+16FE1, U+1B170..1B2FB) \p{Script_Extensions: Nyiakeng_Puachue_Hmong} (Short: \p{Scx= Hmnp}, \p{Hmnp}) (71: U+1E100..1E12C, U+1E130..1E13D, U+1E140..1E149, U+1E14E..1E14F) \p{Script_Extensions: Ogam} \p{Script_Extensions=Ogham} (29) \p{Script_Extensions: Ogham} (Short: \p{Scx=Ogam}, \p{Ogam}) (29: U+1680..169C) \p{Script_Extensions: Ol_Chiki} (Short: \p{Scx=Olck}, \p{Olck}) (48: U+1C50..1C7F) \p{Script_Extensions: Olck} \p{Script_Extensions=Ol_Chiki} (48) \p{Script_Extensions: Old_Hungarian} (Short: \p{Scx=Hung}, \p{Hung}) (108: U+10C80..10CB2, U+10CC0..10CF2, U+10CFA..10CFF) \p{Script_Extensions: Old_Italic} (Short: \p{Scx=Ital}, \p{Ital}) (39: U+10300..10323, U+1032D..1032F) \p{Script_Extensions: Old_North_Arabian} (Short: \p{Scx=Narb}, \p{Narb}) (32: U+10A80..10A9F) \p{Script_Extensions: Old_Permic} (Short: \p{Scx=Perm}, \p{Perm}) (44: U+0483, U+10350..1037A) \p{Script_Extensions: Old_Persian} (Short: \p{Scx=Xpeo}, \p{Xpeo}) (50: U+103A0..103C3, U+103C8..103D5) \p{Script_Extensions: Old_Sogdian} (Short: \p{Scx=Sogo}, \p{Sogo}) (40: U+10F00..10F27) \p{Script_Extensions: Old_South_Arabian} (Short: \p{Scx=Sarb}, \p{Sarb}) (32: U+10A60..10A7F) \p{Script_Extensions: Old_Turkic} (Short: \p{Scx=Orkh}, \p{Orkh}) (73: U+10C00..10C48) \p{Script_Extensions: Oriya} (Short: \p{Scx=Orya}, \p{Orya}) (97: U+0951..0952, U+0964..0965, U+0B01..0B03, U+0B05..0B0C, U+0B0F..0B10, U+0B13..0B28 ...) \p{Script_Extensions: Orkh} \p{Script_Extensions=Old_Turkic} (73) \p{Script_Extensions: Orya} \p{Script_Extensions=Oriya} (97) \p{Script_Extensions: Osage} (Short: \p{Scx=Osge}, \p{Osge}) (72: U+104B0..104D3, U+104D8..104FB) \p{Script_Extensions: Osge} \p{Script_Extensions=Osage} (72) \p{Script_Extensions: Osma} \p{Script_Extensions=Osmanya} (40) \p{Script_Extensions: Osmanya} (Short: \p{Scx=Osma}, \p{Osma}) (40: U+10480..1049D, U+104A0..104A9) \p{Script_Extensions: Pahawh_Hmong} (Short: \p{Scx=Hmng}, \p{Hmng}) (127: U+16B00..16B45, U+16B50..16B59, U+16B5B..16B61, U+16B63..16B77, U+16B7D..16B8F) \p{Script_Extensions: Palm} \p{Script_Extensions=Palmyrene} (32) \p{Script_Extensions: Palmyrene} (Short: \p{Scx=Palm}, \p{Palm}) (32: U+10860..1087F) \p{Script_Extensions: Pau_Cin_Hau} (Short: \p{Scx=Pauc}, \p{Pauc}) (57: U+11AC0..11AF8) \p{Script_Extensions: Pauc} \p{Script_Extensions=Pau_Cin_Hau} (57) \p{Script_Extensions: Perm} \p{Script_Extensions=Old_Permic} (44) \p{Script_Extensions: Phag} \p{Script_Extensions=Phags_Pa} (59) \p{Script_Extensions: Phags_Pa} (Short: \p{Scx=Phag}, \p{Phag}) (59: U+1802..1803, U+1805, U+A840..A877) \p{Script_Extensions: Phli} \p{Script_Extensions= Inscriptional_Pahlavi} (27) \p{Script_Extensions: Phlp} \p{Script_Extensions=Psalter_Pahlavi} (30) \p{Script_Extensions: Phnx} \p{Script_Extensions=Phoenician} (29) \p{Script_Extensions: Phoenician} (Short: \p{Scx=Phnx}, \p{Phnx}) (29: U+10900..1091B, U+1091F) \p{Script_Extensions: Plrd} \p{Script_Extensions=Miao} (149) \p{Script_Extensions: Prti} \p{Script_Extensions= Inscriptional_Parthian} (30) \p{Script_Extensions: Psalter_Pahlavi} (Short: \p{Scx=Phlp}, \p{Phlp}) (30: U+0640, U+10B80..10B91, U+10B99..10B9C, U+10BA9..10BAF) \p{Script_Extensions: Qaac} \p{Script_Extensions=Coptic} (165) \p{Script_Extensions: Qaai} \p{Script_Extensions=Inherited} (503) \p{Script_Extensions: Rejang} (Short: \p{Scx=Rjng}, \p{Rjng}) (37: U+A930..A953, U+A95F) \p{Script_Extensions: Rjng} \p{Script_Extensions=Rejang} (37) \p{Script_Extensions: Rohg} \p{Script_Extensions=Hanifi_Rohingya} (55) \p{Script_Extensions: Runic} (Short: \p{Scx=Runr}, \p{Runr}) (86: U+16A0..16EA, U+16EE..16F8) \p{Script_Extensions: Runr} \p{Script_Extensions=Runic} (86) \p{Script_Extensions: Samaritan} (Short: \p{Scx=Samr}, \p{Samr}) (61: U+0800..082D, U+0830..083E) \p{Script_Extensions: Samr} \p{Script_Extensions=Samaritan} (61) \p{Script_Extensions: Sarb} \p{Script_Extensions= Old_South_Arabian} (32) \p{Script_Extensions: Saur} \p{Script_Extensions=Saurashtra} (82) \p{Script_Extensions: Saurashtra} (Short: \p{Scx=Saur}, \p{Saur}) (82: U+A880..A8C5, U+A8CE..A8D9) \p{Script_Extensions: Sgnw} \p{Script_Extensions=SignWriting} (672) \p{Script_Extensions: Sharada} (Short: \p{Scx=Shrd}, \p{Shrd}) (102: U+0951, U+1CD7, U+1CD9, U+1CDC..1CDD, U+1CE0, U+11180..111DF) \p{Script_Extensions: Shavian} (Short: \p{Scx=Shaw}, \p{Shaw}) (48: U+10450..1047F) \p{Script_Extensions: Shaw} \p{Script_Extensions=Shavian} (48) \p{Script_Extensions: Shrd} \p{Script_Extensions=Sharada} (102) \p{Script_Extensions: Sidd} \p{Script_Extensions=Siddham} (92) \p{Script_Extensions: Siddham} (Short: \p{Scx=Sidd}, \p{Sidd}) (92: U+11580..115B5, U+115B8..115DD) \p{Script_Extensions: SignWriting} (Short: \p{Scx=Sgnw}, \p{Sgnw}) (672: U+1D800..1DA8B, U+1DA9B..1DA9F, U+1DAA1..1DAAF) \p{Script_Extensions: Sind} \p{Script_Extensions=Khudawadi} (81) \p{Script_Extensions: Sinh} \p{Script_Extensions=Sinhala} (113) \p{Script_Extensions: Sinhala} (Short: \p{Scx=Sinh}, \p{Sinh}) (113: U+0964..0965, U+0D81..0D83, U+0D85..0D96, U+0D9A..0DB1, U+0DB3..0DBB, U+0DBD ...) \p{Script_Extensions: Sogd} \p{Script_Extensions=Sogdian} (43) \p{Script_Extensions: Sogdian} (Short: \p{Scx=Sogd}, \p{Sogd}) (43: U+0640, U+10F30..10F59) \p{Script_Extensions: Sogo} \p{Script_Extensions=Old_Sogdian} (40) \p{Script_Extensions: Sora} \p{Script_Extensions=Sora_Sompeng} (35) \p{Script_Extensions: Sora_Sompeng} (Short: \p{Scx=Sora}, \p{Sora}) (35: U+110D0..110E8, U+110F0..110F9) \p{Script_Extensions: Soyo} \p{Script_Extensions=Soyombo} (83) \p{Script_Extensions: Soyombo} (Short: \p{Scx=Soyo}, \p{Soyo}) (83: U+11A50..11AA2) \p{Script_Extensions: Sund} \p{Script_Extensions=Sundanese} (72) \p{Script_Extensions: Sundanese} (Short: \p{Scx=Sund}, \p{Sund}) (72: U+1B80..1BBF, U+1CC0..1CC7) \p{Script_Extensions: Sylo} \p{Script_Extensions=Syloti_Nagri} (57) \p{Script_Extensions: Syloti_Nagri} (Short: \p{Scx=Sylo}, \p{Sylo}) (57: U+0964..0965, U+09E6..09EF, U+A800..A82C) \p{Script_Extensions: Syrc} \p{Script_Extensions=Syriac} (106) \p{Script_Extensions: Syriac} (Short: \p{Scx=Syrc}, \p{Syrc}) (106: U+060C, U+061B..061C, U+061F, U+0640, U+064B..0655, U+0670 ...) \p{Script_Extensions: Tagalog} (Short: \p{Scx=Tglg}, \p{Tglg}) (22: U+1700..170C, U+170E..1714, U+1735..1736) \p{Script_Extensions: Tagb} \p{Script_Extensions=Tagbanwa} (20) \p{Script_Extensions: Tagbanwa} (Short: \p{Scx=Tagb}, \p{Tagb}) (20: U+1735..1736, U+1760..176C, U+176E..1770, U+1772..1773) \p{Script_Extensions: Tai_Le} (Short: \p{Scx=Tale}, \p{Tale}) (45: U+1040..1049, U+1950..196D, U+1970..1974) \p{Script_Extensions: Tai_Tham} (Short: \p{Scx=Lana}, \p{Lana}) (127: U+1A20..1A5E, U+1A60..1A7C, U+1A7F..1A89, U+1A90..1A99, U+1AA0..1AAD) \p{Script_Extensions: Tai_Viet} (Short: \p{Scx=Tavt}, \p{Tavt}) (72: U+AA80..AAC2, U+AADB..AADF) \p{Script_Extensions: Takr} \p{Script_Extensions=Takri} (79) \p{Script_Extensions: Takri} (Short: \p{Scx=Takr}, \p{Takr}) (79: U+0964..0965, U+A830..A839, U+11680..116B8, U+116C0..116C9) \p{Script_Extensions: Tale} \p{Script_Extensions=Tai_Le} (45) \p{Script_Extensions: Talu} \p{Script_Extensions=New_Tai_Lue} (83) \p{Script_Extensions: Tamil} (Short: \p{Scx=Taml}, \p{Taml}) (133: U+0951..0952, U+0964..0965, U+0B82..0B83, U+0B85..0B8A, U+0B8E..0B90, U+0B92..0B95 ...) \p{Script_Extensions: Taml} \p{Script_Extensions=Tamil} (133) \p{Script_Extensions: Tang} \p{Script_Extensions=Tangut} (6914) \p{Script_Extensions: Tangut} (Short: \p{Scx=Tang}, \p{Tang}) (6914: U+16FE0, U+17000..187F7, U+18800..18AFF, U+18D00..18D08) \p{Script_Extensions: Tavt} \p{Script_Extensions=Tai_Viet} (72) \p{Script_Extensions: Telu} \p{Script_Extensions=Telugu} (104) \p{Script_Extensions: Telugu} (Short: \p{Scx=Telu}, \p{Telu}) (104: U+0951..0952, U+0964..0965, U+0C00..0C0C, U+0C0E..0C10, U+0C12..0C28, U+0C2A..0C39 ...) \p{Script_Extensions: Tfng} \p{Script_Extensions=Tifinagh} (59) \p{Script_Extensions: Tglg} \p{Script_Extensions=Tagalog} (22) \p{Script_Extensions: Thaa} \p{Script_Extensions=Thaana} (66) \p{Script_Extensions: Thaana} (Short: \p{Scx=Thaa}, \p{Thaa}) (66: U+060C, U+061B..061C, U+061F, U+0660..0669, U+0780..07B1, U+FDF2 ...) \p{Script_Extensions: Thai} (Short: \p{Scx=Thai}, \p{Thai}) (86: U+0E01..0E3A, U+0E40..0E5B) \p{Script_Extensions: Tibetan} (Short: \p{Scx=Tibt}, \p{Tibt}) (207: U+0F00..0F47, U+0F49..0F6C, U+0F71..0F97, U+0F99..0FBC, U+0FBE..0FCC, U+0FCE..0FD4 ...) \p{Script_Extensions: Tibt} \p{Script_Extensions=Tibetan} (207) \p{Script_Extensions: Tifinagh} (Short: \p{Scx=Tfng}, \p{Tfng}) (59: U+2D30..2D67, U+2D6F..2D70, U+2D7F) \p{Script_Extensions: Tirh} \p{Script_Extensions=Tirhuta} (97) \p{Script_Extensions: Tirhuta} (Short: \p{Scx=Tirh}, \p{Tirh}) (97: U+0951..0952, U+0964..0965, U+1CF2, U+A830..A839, U+11480..114C7, U+114D0..114D9) \p{Script_Extensions: Ugar} \p{Script_Extensions=Ugaritic} (31) \p{Script_Extensions: Ugaritic} (Short: \p{Scx=Ugar}, \p{Ugar}) (31: U+10380..1039D, U+1039F) \p{Script_Extensions: Unknown} (Short: \p{Scx=Zzzz}, \p{Zzzz}) (970_188 plus all above-Unicode code points: U+0378..0379, U+0380..0383, U+038B, U+038D, U+03A2, U+0530 ...) \p{Script_Extensions: Vai} (Short: \p{Scx=Vai}, \p{Vai}) (300: U+A500..A62B) \p{Script_Extensions: Vaii} \p{Script_Extensions=Vai} (300) \p{Script_Extensions: Wancho} (Short: \p{Scx=Wcho}, \p{Wcho}) (59: U+1E2C0..1E2F9, U+1E2FF) \p{Script_Extensions: Wara} \p{Script_Extensions=Warang_Citi} (84) \p{Script_Extensions: Warang_Citi} (Short: \p{Scx=Wara}, \p{Wara}) (84: U+118A0..118F2, U+118FF) \p{Script_Extensions: Wcho} \p{Script_Extensions=Wancho} (59) \p{Script_Extensions: Xpeo} \p{Script_Extensions=Old_Persian} (50) \p{Script_Extensions: Xsux} \p{Script_Extensions=Cuneiform} (1234) \p{Script_Extensions: Yezi} \p{Script_Extensions=Yezidi} (60) \p{Script_Extensions: Yezidi} (Short: \p{Scx=Yezi}, \p{Yezi}) (60: U+060C, U+061B, U+061F, U+0660..0669, U+10E80..10EA9, U+10EAB..10EAD ...) \p{Script_Extensions: Yi} (Short: \p{Scx=Yi}, \p{Yi}) (1246: U+3001..3002, U+3008..3011, U+3014..301B, U+30FB, U+A000..A48C, U+A490..A4C6 ...) \p{Script_Extensions: Yiii} \p{Script_Extensions=Yi} (1246) \p{Script_Extensions: Zanabazar_Square} (Short: \p{Scx=Zanb}, \p{Zanb}) (72: U+11A00..11A47) \p{Script_Extensions: Zanb} \p{Script_Extensions=Zanabazar_Square} (72) \p{Script_Extensions: Zinh} \p{Script_Extensions=Inherited} (503) \p{Script_Extensions: Zyyy} \p{Script_Extensions=Common} (7661) \p{Script_Extensions: Zzzz} \p{Script_Extensions=Unknown} (970_188 plus all above-Unicode code points) \p{Scx: *} \p{Script_Extensions: *} \p{SD} \p{Soft_Dotted} (= \p{Soft_Dotted=Y}) (46) \p{SD: *} \p{Soft_Dotted: *} \p{Sentence_Break: AT} \p{Sentence_Break=ATerm} (4) \p{Sentence_Break: ATerm} (Short: \p{SB=AT}) (4: [.], U+2024, U+FE52, U+FF0E) \p{Sentence_Break: CL} \p{Sentence_Break=Close} (187) \p{Sentence_Break: Close} (Short: \p{SB=CL}) (187: [\"\'\(\)\[\] \{\}\xab\xbb], U+0F3A..0F3D, U+169B..169C, U+2018..201F, U+2039..203A, U+2045..2046 ...) \p{Sentence_Break: CR} (Short: \p{SB=CR}) (1: [\r]) \p{Sentence_Break: EX} \p{Sentence_Break=Extend} (2395) \p{Sentence_Break: Extend} (Short: \p{SB=EX}) (2395: U+0300..036F, U+0483..0489, U+0591..05BD, U+05BF, U+05C1..05C2, U+05C4..05C5 ...) \p{Sentence_Break: FO} \p{Sentence_Break=Format} (63) \p{Sentence_Break: Format} (Short: \p{SB=FO}) (63: [\xad], U+0600..0605, U+061C, U+06DD, U+070F, U+08E2 ...) \p{Sentence_Break: LE} \p{Sentence_Break=OLetter} (127_413) \p{Sentence_Break: LF} (Short: \p{SB=LF}) (1: [\n]) \p{Sentence_Break: LO} \p{Sentence_Break=Lower} (2297) \p{Sentence_Break: Lower} (Short: \p{SB=LO}) (2297: [a-z\xaa\xb5 \xba\xdf-\xf6\xf8-\xff], U+0101, U+0103, U+0105, U+0107, U+0109 ...) \p{Sentence_Break: NU} \p{Sentence_Break=Numeric} (652) \p{Sentence_Break: Numeric} (Short: \p{SB=NU}) (652: [0-9], U+0660..0669, U+066B..066C, U+06F0..06F9, U+07C0..07C9, U+0966..096F ...) \p{Sentence_Break: OLetter} (Short: \p{SB=LE}) (127_413: U+01BB, U+01C0..01C3, U+0294, U+02B9..02BF, U+02C6..02D1, U+02EC ...) \p{Sentence_Break: Other} (Short: \p{SB=XX}) (979_014 plus all above-Unicode code points: [^\t\n\cK\f \r\x20!\"\'\(\),\-.0-9:?A-Z\[\]a-z\{\} \x85\xa0\xaa-\xab\xad\xb5\xba-\xbb\xc0- \xd6\xd8-\xf6\xf8-\xff], U+02C2..02C5, U+02D2..02DF, U+02E5..02EB, U+02ED, U+02EF..02FF ...) \p{Sentence_Break: SC} \p{Sentence_Break=SContinue} (26) \p{Sentence_Break: SContinue} (Short: \p{SB=SC}) (26: [,\-:], U+055D, U+060C..060D, U+07F8, U+1802, U+1808 ...) \p{Sentence_Break: SE} \p{Sentence_Break=Sep} (3) \p{Sentence_Break: Sep} (Short: \p{SB=SE}) (3: [\x85], U+2028..2029) \p{Sentence_Break: Sp} (Short: \p{SB=Sp}) (20: [\t\cK\f\x20\xa0], U+1680, U+2000..200A, U+202F, U+205F, U+3000) \p{Sentence_Break: ST} \p{Sentence_Break=STerm} (140) \p{Sentence_Break: STerm} (Short: \p{SB=ST}) (140: [!?], U+0589, U+061E..061F, U+06D4, U+0700..0702, U+07F9 ...) \p{Sentence_Break: UP} \p{Sentence_Break=Upper} (1896) \p{Sentence_Break: Upper} (Short: \p{SB=UP}) (1896: [A-Z\xc0-\xd6 \xd8-\xde], U+0100, U+0102, U+0104, U+0106, U+0108 ...) \p{Sentence_Break: XX} \p{Sentence_Break=Other} (979_014 plus all above-Unicode code points) \p{Sentence_Terminal} \p{Sentence_Terminal=Y} (Short: \p{STerm}) (143) \p{Sentence_Terminal: N*} (Short: \p{STerm=N}, \P{STerm}) (1_113_969 plus all above-Unicode code points: [\x00-\x20\"#\$\%&\'\(\)*+,\- \/0-9:;<=>\@A-Z\[\\\]\^_`a-z\{\|\}~\x7f- \xff], U+0100..0588, U+058A..061D, U+0620..06D3, U+06D5..06FF, U+0703..07F8 ...) \p{Sentence_Terminal: Y*} (Short: \p{STerm=Y}, \p{STerm}) (143: [!.?], U+0589, U+061E..061F, U+06D4, U+0700..0702, U+07F9 ...) \p{Separator} \p{General_Category=Separator} (Short: \p{Z}) (19) \p{Sgnw} \p{SignWriting} (= \p{Script_Extensions= SignWriting}) (672) \p{Sharada} \p{Script_Extensions=Sharada} (Short: \p{Shrd}; NOT \p{Block=Sharada}) (102) \p{Shavian} \p{Script_Extensions=Shavian} (Short: \p{Shaw}) (48) \p{Shaw} \p{Shavian} (= \p{Script_Extensions= Shavian}) (48) X \p{Shorthand_Format_Controls} \p{Block=Shorthand_Format_Controls} (16) \p{Shrd} \p{Sharada} (= \p{Script_Extensions= Sharada}) (NOT \p{Block=Sharada}) (102) \p{Sidd} \p{Siddham} (= \p{Script_Extensions= Siddham}) (NOT \p{Block=Siddham}) (92) \p{Siddham} \p{Script_Extensions=Siddham} (Short: \p{Sidd}; NOT \p{Block=Siddham}) (92) \p{SignWriting} \p{Script_Extensions=SignWriting} (Short: \p{Sgnw}) (672) \p{Sind} \p{Khudawadi} (= \p{Script_Extensions= Khudawadi}) (NOT \p{Block=Khudawadi}) (81) \p{Sinh} \p{Sinhala} (= \p{Script_Extensions= Sinhala}) (NOT \p{Block=Sinhala}) (113) \p{Sinhala} \p{Script_Extensions=Sinhala} (Short: \p{Sinh}; NOT \p{Block=Sinhala}) (113) X \p{Sinhala_Archaic_Numbers} \p{Block=Sinhala_Archaic_Numbers} (32) \p{Sk} \p{Modifier_Symbol} (= \p{General_Category=Modifier_Symbol}) (123) \p{Sm} \p{Math_Symbol} (= \p{General_Category= Math_Symbol}) (948) X \p{Small_Form_Variants} \p{Block=Small_Form_Variants} (Short: \p{InSmallForms}) (32) X \p{Small_Forms} \p{Small_Form_Variants} (= \p{Block= Small_Form_Variants}) (32) X \p{Small_Kana_Ext} \p{Small_Kana_Extension} (= \p{Block= Small_Kana_Extension}) (64) X \p{Small_Kana_Extension} \p{Block=Small_Kana_Extension} (Short: \p{InSmallKanaExt}) (64) \p{So} \p{Other_Symbol} (= \p{General_Category= Other_Symbol}) (6431) \p{Soft_Dotted} \p{Soft_Dotted=Y} (Short: \p{SD}) (46) \p{Soft_Dotted: N*} (Short: \p{SD=N}, \P{SD}) (1_114_066 plus all above-Unicode code points: [\x00- \x20!\"#\$\%&\'\(\)*+,\-.\/0-9:;<=>?\@A- Z\[\\\]\^_`a-hk-z\{\|\}~\x7f-\xff], U+0100..012E, U+0130..0248, U+024A..0267, U+0269..029C, U+029E..02B1 ...) \p{Soft_Dotted: Y*} (Short: \p{SD=Y}, \p{SD}) (46: [i-j], U+012F, U+0249, U+0268, U+029D, U+02B2 ...) \p{Sogd} \p{Sogdian} (= \p{Script_Extensions= Sogdian}) (NOT \p{Block=Sogdian}) (43) \p{Sogdian} \p{Script_Extensions=Sogdian} (Short: \p{Sogd}; NOT \p{Block=Sogdian}) (43) \p{Sogo} \p{Old_Sogdian} (= \p{Script_Extensions= Old_Sogdian}) (NOT \p{Block= Old_Sogdian}) (40) \p{Sora} \p{Sora_Sompeng} (= \p{Script_Extensions= Sora_Sompeng}) (NOT \p{Block= Sora_Sompeng}) (35) \p{Sora_Sompeng} \p{Script_Extensions=Sora_Sompeng} (Short: \p{Sora}; NOT \p{Block=Sora_Sompeng}) (35) \p{Soyo} \p{Soyombo} (= \p{Script_Extensions= Soyombo}) (NOT \p{Block=Soyombo}) (83) \p{Soyombo} \p{Script_Extensions=Soyombo} (Short: \p{Soyo}; NOT \p{Block=Soyombo}) (83) \p{Space} \p{White_Space} (= \p{White_Space=Y}) (25) \p{Space: *} \p{White_Space: *} \p{Space_Separator} \p{General_Category=Space_Separator} (Short: \p{Zs}) (17) \p{SpacePerl} \p{XPosixSpace} (25) \p{Spacing_Mark} \p{General_Category=Spacing_Mark} (Short: \p{Mc}) (443) X \p{Spacing_Modifier_Letters} \p{Block=Spacing_Modifier_Letters} (Short: \p{InModifierLetters}) (80) X \p{Specials} \p{Block=Specials} (16) \p{STerm} \p{Sentence_Terminal} (= \p{Sentence_Terminal=Y}) (143) \p{STerm: *} \p{Sentence_Terminal: *} \p{Sund} \p{Sundanese} (= \p{Script_Extensions= Sundanese}) (NOT \p{Block=Sundanese}) (72) \p{Sundanese} \p{Script_Extensions=Sundanese} (Short: \p{Sund}; NOT \p{Block=Sundanese}) (72) X \p{Sundanese_Sup} \p{Sundanese_Supplement} (= \p{Block= Sundanese_Supplement}) (16) X \p{Sundanese_Supplement} \p{Block=Sundanese_Supplement} (Short: \p{InSundaneseSup}) (16) X \p{Sup_Arrows_A} \p{Supplemental_Arrows_A} (= \p{Block= Supplemental_Arrows_A}) (16) X \p{Sup_Arrows_B} \p{Supplemental_Arrows_B} (= \p{Block= Supplemental_Arrows_B}) (128) X \p{Sup_Arrows_C} \p{Supplemental_Arrows_C} (= \p{Block= Supplemental_Arrows_C}) (256) X \p{Sup_Math_Operators} \p{Supplemental_Mathematical_Operators} (= \p{Block= Supplemental_Mathematical_Operators}) (256) X \p{Sup_PUA_A} \p{Supplementary_Private_Use_Area_A} (= \p{Block= Supplementary_Private_Use_Area_A}) (65_536) X \p{Sup_PUA_B} \p{Supplementary_Private_Use_Area_B} (= \p{Block= Supplementary_Private_Use_Area_B}) (65_536) X \p{Sup_Punctuation} \p{Supplemental_Punctuation} (= \p{Block= Supplemental_Punctuation}) (128) X \p{Sup_Symbols_And_Pictographs} \p{Supplemental_Symbols_And_Pictographs} (= \p{Block= Supplemental_Symbols_And_Pictographs}) (256) X \p{Super_And_Sub} \p{Superscripts_And_Subscripts} (= \p{Block=Superscripts_And_Subscripts}) (48) X \p{Superscripts_And_Subscripts} \p{Block= Superscripts_And_Subscripts} (Short: \p{InSuperAndSub}) (48) X \p{Supplemental_Arrows_A} \p{Block=Supplemental_Arrows_A} (Short: \p{InSupArrowsA}) (16) X \p{Supplemental_Arrows_B} \p{Block=Supplemental_Arrows_B} (Short: \p{InSupArrowsB}) (128) X \p{Supplemental_Arrows_C} \p{Block=Supplemental_Arrows_C} (Short: \p{InSupArrowsC}) (256) X \p{Supplemental_Mathematical_Operators} \p{Block= Supplemental_Mathematical_Operators} (Short: \p{InSupMathOperators}) (256) X \p{Supplemental_Punctuation} \p{Block=Supplemental_Punctuation} (Short: \p{InSupPunctuation}) (128) X \p{Supplemental_Symbols_And_Pictographs} \p{Block= Supplemental_Symbols_And_Pictographs} (Short: \p{InSupSymbolsAndPictographs}) (256) X \p{Supplementary_Private_Use_Area_A} \p{Block= Supplementary_Private_Use_Area_A} (Short: \p{InSupPUAA}) (65_536) X \p{Supplementary_Private_Use_Area_B} \p{Block= Supplementary_Private_Use_Area_B} (Short: \p{InSupPUAB}) (65_536) \p{Surrogate} \p{General_Category=Surrogate} (Short: \p{Cs}) (2048) X \p{Sutton_SignWriting} \p{Block=Sutton_SignWriting} (688) \p{Sylo} \p{Syloti_Nagri} (= \p{Script_Extensions= Syloti_Nagri}) (NOT \p{Block= Syloti_Nagri}) (57) \p{Syloti_Nagri} \p{Script_Extensions=Syloti_Nagri} (Short: \p{Sylo}; NOT \p{Block=Syloti_Nagri}) (57) \p{Symbol} \p{General_Category=Symbol} (Short: \p{S}) (7564) X \p{Symbols_And_Pictographs_Ext_A} \p{Symbols_And_Pictographs_Extended_A} (= \p{Block= Symbols_And_Pictographs_Extended_A}) (144) X \p{Symbols_And_Pictographs_Extended_A} \p{Block= Symbols_And_Pictographs_Extended_A} (144) X \p{Symbols_For_Legacy_Computing} \p{Block= Symbols_For_Legacy_Computing} (256) \p{Syrc} \p{Syriac} (= \p{Script_Extensions= Syriac}) (NOT \p{Block=Syriac}) (106) \p{Syriac} \p{Script_Extensions=Syriac} (Short: \p{Syrc}; NOT \p{Block=Syriac}) (106) X \p{Syriac_Sup} \p{Syriac_Supplement} (= \p{Block= Syriac_Supplement}) (16) X \p{Syriac_Supplement} \p{Block=Syriac_Supplement} (Short: \p{InSyriacSup}) (16) \p{Tagalog} \p{Script_Extensions=Tagalog} (Short: \p{Tglg}; NOT \p{Block=Tagalog}) (22) \p{Tagb} \p{Tagbanwa} (= \p{Script_Extensions= Tagbanwa}) (NOT \p{Block=Tagbanwa}) (20) \p{Tagbanwa} \p{Script_Extensions=Tagbanwa} (Short: \p{Tagb}; NOT \p{Block=Tagbanwa}) (20) X \p{Tags} \p{Block=Tags} (128) \p{Tai_Le} \p{Script_Extensions=Tai_Le} (Short: \p{Tale}; NOT \p{Block=Tai_Le}) (45) \p{Tai_Tham} \p{Script_Extensions=Tai_Tham} (Short: \p{Lana}; NOT \p{Block=Tai_Tham}) (127) \p{Tai_Viet} \p{Script_Extensions=Tai_Viet} (Short: \p{Tavt}; NOT \p{Block=Tai_Viet}) (72) X \p{Tai_Xuan_Jing} \p{Tai_Xuan_Jing_Symbols} (= \p{Block= Tai_Xuan_Jing_Symbols}) (96) X \p{Tai_Xuan_Jing_Symbols} \p{Block=Tai_Xuan_Jing_Symbols} (Short: \p{InTaiXuanJing}) (96) \p{Takr} \p{Takri} (= \p{Script_Extensions=Takri}) (NOT \p{Block=Takri}) (79) \p{Takri} \p{Script_Extensions=Takri} (Short: \p{Takr}; NOT \p{Block=Takri}) (79) \p{Tale} \p{Tai_Le} (= \p{Script_Extensions= Tai_Le}) (NOT \p{Block=Tai_Le}) (45) \p{Talu} \p{New_Tai_Lue} (= \p{Script_Extensions= New_Tai_Lue}) (NOT \p{Block= New_Tai_Lue}) (83) \p{Tamil} \p{Script_Extensions=Tamil} (Short: \p{Taml}; NOT \p{Block=Tamil}) (133) X \p{Tamil_Sup} \p{Tamil_Supplement} (= \p{Block= Tamil_Supplement}) (64) X \p{Tamil_Supplement} \p{Block=Tamil_Supplement} (Short: \p{InTamilSup}) (64) \p{Taml} \p{Tamil} (= \p{Script_Extensions=Tamil}) (NOT \p{Block=Tamil}) (133) \p{Tang} \p{Tangut} (= \p{Script_Extensions= Tangut}) (NOT \p{Block=Tangut}) (6914) \p{Tangut} \p{Script_Extensions=Tangut} (Short: \p{Tang}; NOT \p{Block=Tangut}) (6914) X \p{Tangut_Components} \p{Block=Tangut_Components} (768) X \p{Tangut_Sup} \p{Tangut_Supplement} (= \p{Block= Tangut_Supplement}) (144) X \p{Tangut_Supplement} \p{Block=Tangut_Supplement} (Short: \p{InTangutSup}) (144) \p{Tavt} \p{Tai_Viet} (= \p{Script_Extensions= Tai_Viet}) (NOT \p{Block=Tai_Viet}) (72) \p{Telu} \p{Telugu} (= \p{Script_Extensions= Telugu}) (NOT \p{Block=Telugu}) (104) \p{Telugu} \p{Script_Extensions=Telugu} (Short: \p{Telu}; NOT \p{Block=Telugu}) (104) \p{Term} \p{Terminal_Punctuation} (= \p{Terminal_Punctuation=Y}) (267) \p{Term: *} \p{Terminal_Punctuation: *} \p{Terminal_Punctuation} \p{Terminal_Punctuation=Y} (Short: \p{Term}) (267) \p{Terminal_Punctuation: N*} (Short: \p{Term=N}, \P{Term}) (1_113_845 plus all above-Unicode code points: [\x00-\x20\"#\$\%&\'\(\)*+\-\/0- 9<=>\@A-Z\[\\\]\^_`a-z\{\|\}~\x7f-\xff], U+0100..037D, U+037F..0386, U+0388..0588, U+058A..05C2, U+05C4..060B ...) \p{Terminal_Punctuation: Y*} (Short: \p{Term=Y}, \p{Term}) (267: [!,.:;?], U+037E, U+0387, U+0589, U+05C3, U+060C ...) \p{Tfng} \p{Tifinagh} (= \p{Script_Extensions= Tifinagh}) (NOT \p{Block=Tifinagh}) (59) \p{Tglg} \p{Tagalog} (= \p{Script_Extensions= Tagalog}) (NOT \p{Block=Tagalog}) (22) \p{Thaa} \p{Thaana} (= \p{Script_Extensions= Thaana}) (NOT \p{Block=Thaana}) (66) \p{Thaana} \p{Script_Extensions=Thaana} (Short: \p{Thaa}; NOT \p{Block=Thaana}) (66) \p{Thai} \p{Script_Extensions=Thai} (NOT \p{Block= Thai}) (86) \p{Tibetan} \p{Script_Extensions=Tibetan} (Short: \p{Tibt}; NOT \p{Block=Tibetan}) (207) \p{Tibt} \p{Tibetan} (= \p{Script_Extensions= Tibetan}) (NOT \p{Block=Tibetan}) (207) \p{Tifinagh} \p{Script_Extensions=Tifinagh} (Short: \p{Tfng}; NOT \p{Block=Tifinagh}) (59) \p{Tirh} \p{Tirhuta} (= \p{Script_Extensions= Tirhuta}) (NOT \p{Block=Tirhuta}) (97) \p{Tirhuta} \p{Script_Extensions=Tirhuta} (Short: \p{Tirh}; NOT \p{Block=Tirhuta}) (97) \p{Title} \p{Titlecase} (/i= Cased=Yes) (31) \p{Titlecase} (= \p{Gc=Lt}) (Short: \p{Title}; /i= Cased=Yes) (31: U+01C5, U+01C8, U+01CB, U+01F2, U+1F88..1F8F, U+1F98..1F9F ...) \p{Titlecase_Letter} \p{General_Category=Titlecase_Letter} (Short: \p{Lt}; /i= General_Category= Cased_Letter) (31) X \p{Transport_And_Map} \p{Transport_And_Map_Symbols} (= \p{Block= Transport_And_Map_Symbols}) (128) X \p{Transport_And_Map_Symbols} \p{Block=Transport_And_Map_Symbols} (Short: \p{InTransportAndMap}) (128) X \p{UCAS} \p{Unified_Canadian_Aboriginal_Syllabics} (= \p{Block= Unified_Canadian_Aboriginal_Syllabics}) (640) X \p{UCAS_Ext} \p{Unified_Canadian_Aboriginal_Syllabics_- Extended} (= \p{Block= Unified_Canadian_Aboriginal_Syllabics_- Extended}) (80) \p{Ugar} \p{Ugaritic} (= \p{Script_Extensions= Ugaritic}) (NOT \p{Block=Ugaritic}) (31) \p{Ugaritic} \p{Script_Extensions=Ugaritic} (Short: \p{Ugar}; NOT \p{Block=Ugaritic}) (31) \p{UIdeo} \p{Unified_Ideograph} (= \p{Unified_Ideograph=Y}) (92_856) \p{UIdeo: *} \p{Unified_Ideograph: *} \p{Unassigned} \p{General_Category=Unassigned} (Short: \p{Cn}) (830_672 plus all above-Unicode code points) \p{Unicode} \p{Any} (1_114_112) X \p{Unified_Canadian_Aboriginal_Syllabics} \p{Block= Unified_Canadian_Aboriginal_Syllabics} (Short: \p{InUCAS}) (640) X \p{Unified_Canadian_Aboriginal_Syllabics_Extended} \p{Block= Unified_Canadian_Aboriginal_Syllabics_- Extended} (Short: \p{InUCASExt}) (80) \p{Unified_Ideograph} \p{Unified_Ideograph=Y} (Short: \p{UIdeo}) (92_856) \p{Unified_Ideograph: N*} (Short: \p{UIdeo=N}, \P{UIdeo}) (1_021_256 plus all above-Unicode code points: U+0000..33FF, U+4DC0..4DFF, U+9FFD..FA0D, U+FA10, U+FA12, U+FA15..FA1E ...) \p{Unified_Ideograph: Y*} (Short: \p{UIdeo=Y}, \p{UIdeo}) (92_856: U+3400..4DBF, U+4E00..9FFC, U+FA0E..FA0F, U+FA11, U+FA13..FA14, U+FA1F ...) \p{Unknown} \p{Script_Extensions=Unknown} (Short: \p{Zzzz}) (970_188 plus all above- Unicode code points) \p{Upper} \p{XPosixUpper} (= \p{Uppercase=Y}) (/i= Cased=Yes) (1911) \p{Upper: *} \p{Uppercase: *} \p{Uppercase} \p{XPosixUpper} (= \p{Uppercase=Y}) (/i= Cased=Yes) (1911) \p{Uppercase: N*} (Short: \p{Upper=N}, \P{Upper}; /i= Cased= No) (1_112_201 plus all above-Unicode code points: [\x00-\x20!\"#\$\%&\' \(\)*+,\-.\/0-9:;<=>?\@\[\\\]\^_`a-z\{ \|\}~\x7f-\xbf\xd7\xdf-\xff], U+0101, U+0103, U+0105, U+0107, U+0109 ...) \p{Uppercase: Y*} (Short: \p{Upper=Y}, \p{Upper}; /i= Cased= Yes) (1911: [A-Z\xc0-\xd6\xd8-\xde], U+0100, U+0102, U+0104, U+0106, U+0108 ...) \p{Uppercase_Letter} \p{General_Category=Uppercase_Letter} (Short: \p{Lu}; /i= General_Category= Cased_Letter) (1791) \p{Vai} \p{Script_Extensions=Vai} (NOT \p{Block= Vai}) (300) \p{Vaii} \p{Vai} (= \p{Script_Extensions=Vai}) (NOT \p{Block=Vai}) (300) \p{Variation_Selector} \p{Variation_Selector=Y} (Short: \p{VS}; NOT \p{Variation_Selectors}) (259) \p{Variation_Selector: N*} (Short: \p{VS=N}, \P{VS}) (1_113_853 plus all above-Unicode code points: U+0000..180A, U+180E..FDFF, U+FE10..E00FF, U+E01F0..infinity) \p{Variation_Selector: Y*} (Short: \p{VS=Y}, \p{VS}) (259: U+180B..180D, U+FE00..FE0F, U+E0100..E01EF) X \p{Variation_Selectors} \p{Block=Variation_Selectors} (Short: \p{InVS}) (16) X \p{Variation_Selectors_Supplement} \p{Block= Variation_Selectors_Supplement} (Short: \p{InVSSup}) (240) X \p{Vedic_Ext} \p{Vedic_Extensions} (= \p{Block= Vedic_Extensions}) (48) X \p{Vedic_Extensions} \p{Block=Vedic_Extensions} (Short: \p{InVedicExt}) (48) X \p{Vertical_Forms} \p{Block=Vertical_Forms} (16) \p{Vertical_Orientation: R} \p{Vertical_Orientation=Rotated} (786_865 plus all above-Unicode code points) \p{Vertical_Orientation: Rotated} (Short: \p{Vo=R}) (786_865 plus all above-Unicode code points: [\x00- \xa6\xa8\xaa-\xad\xaf-\xb0\xb2-\xbb\xbf- \xd6\xd8-\xf6\xf8-\xff], U+0100..02E9, U+02EC..10FF, U+1200..1400, U+1680..18AF, U+1900..2015 ...) \p{Vertical_Orientation: Tr} \p{Vertical_Orientation= Transformed_Rotated} (47) \p{Vertical_Orientation: Transformed_Rotated} (Short: \p{Vo=Tr}) (47: U+2329..232A, U+3008..3011, U+3014..301F, U+3030, U+30A0, U+30FC ...) \p{Vertical_Orientation: Transformed_Upright} (Short: \p{Vo=Tu}) (148: U+3001..3002, U+3041, U+3043, U+3045, U+3047, U+3049 ...) \p{Vertical_Orientation: Tu} \p{Vertical_Orientation= Transformed_Upright} (148) \p{Vertical_Orientation: U} \p{Vertical_Orientation=Upright} (327_052) \p{Vertical_Orientation: Upright} (Short: \p{Vo=U}) (327_052: [\xa7\xa9\xae\xb1\xbc-\xbe\xd7\xf7], U+02EA..02EB, U+1100..11FF, U+1401..167F, U+18B0..18FF, U+2016 ...) \p{VertSpace} \v (7: [\n\cK\f\r\x85], U+2028..2029) \p{Vo: *} \p{Vertical_Orientation: *} \p{VS} \p{Variation_Selector} (= \p{Variation_Selector=Y}) (NOT \p{Variation_Selectors}) (259) \p{VS: *} \p{Variation_Selector: *} X \p{VS_Sup} \p{Variation_Selectors_Supplement} (= \p{Block= Variation_Selectors_Supplement}) (240) \p{Wancho} \p{Script_Extensions=Wancho} (Short: \p{Wcho}; NOT \p{Block=Wancho}) (59) \p{Wara} \p{Warang_Citi} (= \p{Script_Extensions= Warang_Citi}) (NOT \p{Block= Warang_Citi}) (84) \p{Warang_Citi} \p{Script_Extensions=Warang_Citi} (Short: \p{Wara}; NOT \p{Block=Warang_Citi}) (84) \p{WB: *} \p{Word_Break: *} \p{Wcho} \p{Wancho} (= \p{Script_Extensions= Wancho}) (NOT \p{Block=Wancho}) (59) \p{White_Space} \p{White_Space=Y} (Short: \p{Space}) (25) \p{White_Space: N*} (Short: \p{Space=N}, \P{Space}) (1_114_087 plus all above-Unicode code points: [^ \t\n\cK\f\r\x20\x85\xa0], U+0100..167F, U+1681..1FFF, U+200B..2027, U+202A..202E, U+2030..205E ...) \p{White_Space: Y*} (Short: \p{Space=Y}, \p{Space}) (25: [\t \n\cK\f\r\x20\x85\xa0], U+1680, U+2000..200A, U+2028..2029, U+202F, U+205F ...) \p{Word} \p{XPosixWord} (134_564) \p{Word_Break: ALetter} (Short: \p{WB=LE}) (28_854: [A-Za-z\xaa \xb5\xba\xc0-\xd6\xd8-\xf6\xf8-\xff], U+0100..02D7, U+02DE..02FF, U+0370..0374, U+0376..0377, U+037A..037D ...) \p{Word_Break: CR} (Short: \p{WB=CR}) (1: [\r]) \p{Word_Break: Double_Quote} (Short: \p{WB=DQ}) (1: [\"]) \p{Word_Break: DQ} \p{Word_Break=Double_Quote} (1) \p{Word_Break: E_Base} (Short: \p{WB=EB}) (0) \p{Word_Break: E_Base_GAZ} (Short: \p{WB=EBG}) (0) \p{Word_Break: E_Modifier} (Short: \p{WB=EM}) (0) \p{Word_Break: EB} \p{Word_Break=E_Base} (0) \p{Word_Break: EBG} \p{Word_Break=E_Base_GAZ} (0) \p{Word_Break: EM} \p{Word_Break=E_Modifier} (0) \p{Word_Break: EX} \p{Word_Break=ExtendNumLet} (11) \p{Word_Break: Extend} (Short: \p{WB=Extend}) (2399: U+0300..036F, U+0483..0489, U+0591..05BD, U+05BF, U+05C1..05C2, U+05C4..05C5 ...) \p{Word_Break: ExtendNumLet} (Short: \p{WB=EX}) (11: [_], U+202F, U+203F..2040, U+2054, U+FE33..FE34, U+FE4D..FE4F ...) \p{Word_Break: FO} \p{Word_Break=Format} (62) \p{Word_Break: Format} (Short: \p{WB=FO}) (62: [\xad], U+0600..0605, U+061C, U+06DD, U+070F, U+08E2 ...) \p{Word_Break: GAZ} \p{Word_Break=Glue_After_Zwj} (0) \p{Word_Break: Glue_After_Zwj} (Short: \p{WB=GAZ}) (0) \p{Word_Break: Hebrew_Letter} (Short: \p{WB=HL}) (75: U+05D0..05EA, U+05EF..05F2, U+FB1D, U+FB1F..FB28, U+FB2A..FB36, U+FB38..FB3C ...) \p{Word_Break: HL} \p{Word_Break=Hebrew_Letter} (75) \p{Word_Break: KA} \p{Word_Break=Katakana} (314) \p{Word_Break: Katakana} (Short: \p{WB=KA}) (314: U+3031..3035, U+309B..309C, U+30A0..30FA, U+30FC..30FF, U+31F0..31FF, U+32D0..32FE ...) \p{Word_Break: LE} \p{Word_Break=ALetter} (28_854) \p{Word_Break: LF} (Short: \p{WB=LF}) (1: [\n]) \p{Word_Break: MB} \p{Word_Break=MidNumLet} (7) \p{Word_Break: MidLetter} (Short: \p{WB=ML}) (9: [:\xb7], U+0387, U+055F, U+05F4, U+2027, U+FE13 ...) \p{Word_Break: MidNum} (Short: \p{WB=MN}) (15: [,;], U+037E, U+0589, U+060C..060D, U+066C, U+07F8 ...) \p{Word_Break: MidNumLet} (Short: \p{WB=MB}) (7: [.], U+2018..2019, U+2024, U+FE52, U+FF07, U+FF0E) \p{Word_Break: ML} \p{Word_Break=MidLetter} (9) \p{Word_Break: MN} \p{Word_Break=MidNum} (15) \p{Word_Break: Newline} (Short: \p{WB=NL}) (5: [\cK\f\x85], U+2028..2029) \p{Word_Break: NL} \p{Word_Break=Newline} (5) \p{Word_Break: NU} \p{Word_Break=Numeric} (651) \p{Word_Break: Numeric} (Short: \p{WB=NU}) (651: [0-9], U+0660..0669, U+066B, U+06F0..06F9, U+07C0..07C9, U+0966..096F ...) \p{Word_Break: Other} (Short: \p{WB=XX}) (1_081_665 plus all above-Unicode code points: [^\n\cK\f\r \x20\"\',.0-9:;A-Z_a-z\x85\xaa\xad\xb5 \xb7\xba\xc0-\xd6\xd8-\xf6\xf8-\xff], U+02D8..02DD, U+0375, U+0378..0379, U+0380..0385, U+038B ...) \p{Word_Break: Regional_Indicator} (Short: \p{WB=RI}) (26: U+1F1E6..1F1FF) \p{Word_Break: RI} \p{Word_Break=Regional_Indicator} (26) \p{Word_Break: Single_Quote} (Short: \p{WB=SQ}) (1: [\']) \p{Word_Break: SQ} \p{Word_Break=Single_Quote} (1) \p{Word_Break: WSegSpace} (Short: \p{WB=WSegSpace}) (14: [\x20], U+1680, U+2000..2006, U+2008..200A, U+205F, U+3000) \p{Word_Break: XX} \p{Word_Break=Other} (1_081_665 plus all above-Unicode code points) \p{Word_Break: ZWJ} (Short: \p{WB=ZWJ}) (1: U+200D) \p{WSpace} \p{White_Space} (= \p{White_Space=Y}) (25) \p{WSpace: *} \p{White_Space: *} \p{XDigit} \p{XPosixXDigit} (= \p{Hex_Digit=Y}) (44) \p{XID_Continue} \p{XID_Continue=Y} (Short: \p{XIDC}) (134_415) \p{XID_Continue: N*} (Short: \p{XIDC=N}, \P{XIDC}) (979_697 plus all above-Unicode code points: [\x00-\x20!\"#\$\%&\'\(\)*+,\-.\/:;<=>? \@\[\\\]\^`\{\|\}~\x7f-\xa9\xab-\xb4 \xb6\xb8-\xb9\xbb-\xbf\xd7\xf7], U+02C2..02C5, U+02D2..02DF, U+02E5..02EB, U+02ED, U+02EF..02FF ...) \p{XID_Continue: Y*} (Short: \p{XIDC=Y}, \p{XIDC}) (134_415: [0-9A-Z_a-z\xaa\xb5\xb7\xba\xc0-\xd6 \xd8-\xf6\xf8-\xff], U+0100..02C1, U+02C6..02D1, U+02E0..02E4, U+02EC, U+02EE ...) \p{XID_Start} \p{XID_Start=Y} (Short: \p{XIDS}) (131_459) \p{XID_Start: N*} (Short: \p{XIDS=N}, \P{XIDS}) (982_653 plus all above-Unicode code points: [\x00-\x20!\"#\$\%&\'\(\)*+,\-.\/0-9:;<= >?\@\[\\\]\^_`\{\|\}~\x7f-\xa9\xab-\xb4 \xb6-\xb9\xbb-\xbf\xd7\xf7], U+02C2..02C5, U+02D2..02DF, U+02E5..02EB, U+02ED, U+02EF..036F ...) \p{XID_Start: Y*} (Short: \p{XIDS=Y}, \p{XIDS}) (131_459: [A-Za-z\xaa\xb5\xba\xc0-\xd6\xd8-\xf6 \xf8-\xff], U+0100..02C1, U+02C6..02D1, U+02E0..02E4, U+02EC, U+02EE ...) \p{XIDC} \p{XID_Continue} (= \p{XID_Continue=Y}) (134_415) \p{XIDC: *} \p{XID_Continue: *} \p{XIDS} \p{XID_Start} (= \p{XID_Start=Y}) (131_459) \p{XIDS: *} \p{XID_Start: *} \p{Xpeo} \p{Old_Persian} (= \p{Script_Extensions= Old_Persian}) (NOT \p{Block= Old_Persian}) (50) \p{XPerlSpace} \p{XPosixSpace} (25) \p{XPosixAlnum} Alphabetic and (decimal) Numeric (Short: \p{Alnum}) (133_525: [0-9A-Za-z\xaa\xb5 \xba\xc0-\xd6\xd8-\xf6\xf8-\xff], U+0100..02C1, U+02C6..02D1, U+02E0..02E4, U+02EC, U+02EE ...) \p{XPosixAlpha} \p{Alphabetic=Y} (Short: \p{Alpha}) (132_875) \p{XPosixBlank} \h, Horizontal white space (Short: \p{Blank}) (18: [\t\x20\xa0], U+1680, U+2000..200A, U+202F, U+205F, U+3000) \p{XPosixCntrl} \p{General_Category=Control} Control characters (Short: \p{Cc}) (65) \p{XPosixDigit} \p{General_Category=Decimal_Number} [0-9] + all other decimal digits (Short: \p{Nd}) (650) \p{XPosixGraph} Characters that are graphical (Short: \p{Graph}) (281_308: [!\"#\$\%&\' \(\)*+,\-.\/0-9:;<=>?\@A-Z\[\\\]\^_`a-z \{\|\}~\xa1-\xff], U+0100..0377, U+037A..037F, U+0384..038A, U+038C, U+038E..03A1 ...) \p{XPosixLower} \p{Lowercase=Y} (Short: \p{Lower}; /i= Cased=Yes) (2344) \p{XPosixPrint} Characters that are graphical plus space characters (but no controls) (Short: \p{Print}) (281_325: [\x20-\x7e\xa0- \xff], U+0100..0377, U+037A..037F, U+0384..038A, U+038C, U+038E..03A1 ...) \p{XPosixPunct} \p{Punct} + ASCII-range \p{Symbol} (807: [!\"#\$\%&\'\(\)*+,\-.\/:;<=>?\@\[\\\] \^_`\{\|\}~\xa1\xa7\xab\xb6-\xb7\xbb \xbf], U+037E, U+0387, U+055A..055F, U+0589..058A, U+05BE ...) \p{XPosixSpace} \s including beyond ASCII and vertical tab (Short: \p{SpacePerl}) (25: [\t\n\cK\f \r\x20\x85\xa0], U+1680, U+2000..200A, U+2028..2029, U+202F, U+205F ...) \p{XPosixUpper} \p{Uppercase=Y} (Short: \p{Upper}; /i= Cased=Yes) (1911) \p{XPosixWord} \w, including beyond ASCII; = \p{Alnum} + \pM + \p{Pc} + \p{Join_Control} (Short: \p{Word}) (134_564: [0-9A-Z_a-z\xaa\xb5 \xba\xc0-\xd6\xd8-\xf6\xf8-\xff], U+0100..02C1, U+02C6..02D1, U+02E0..02E4, U+02EC, U+02EE ...) \p{XPosixXDigit} \p{Hex_Digit=Y} (Short: \p{Hex}) (44) \p{Xsux} \p{Cuneiform} (= \p{Script_Extensions= Cuneiform}) (NOT \p{Block=Cuneiform}) (1234) \p{Yezi} \p{Yezidi} (= \p{Script_Extensions= Yezidi}) (NOT \p{Block=Yezidi}) (60) \p{Yezidi} \p{Script_Extensions=Yezidi} (Short: \p{Yezi}; NOT \p{Block=Yezidi}) (60) \p{Yi} \p{Script_Extensions=Yi} (1246) X \p{Yi_Radicals} \p{Block=Yi_Radicals} (64) X \p{Yi_Syllables} \p{Block=Yi_Syllables} (1168) \p{Yiii} \p{Yi} (= \p{Script_Extensions=Yi}) (1246) X \p{Yijing} \p{Yijing_Hexagram_Symbols} (= \p{Block= Yijing_Hexagram_Symbols}) (64) X \p{Yijing_Hexagram_Symbols} \p{Block=Yijing_Hexagram_Symbols} (Short: \p{InYijing}) (64) \p{Z} \pZ \p{Separator} (= \p{General_Category= Separator}) (19) \p{Zanabazar_Square} \p{Script_Extensions=Zanabazar_Square} (Short: \p{Zanb}; NOT \p{Block= Zanabazar_Square}) (72) \p{Zanb} \p{Zanabazar_Square} (= \p{Script_Extensions=Zanabazar_Square}) (NOT \p{Block=Zanabazar_Square}) (72) \p{Zinh} \p{Inherited} (= \p{Script_Extensions= Inherited}) (503) \p{Zl} \p{Line_Separator} (= \p{General_Category= Line_Separator}) (1) \p{Zp} \p{Paragraph_Separator} (= \p{General_Category= Paragraph_Separator}) (1) \p{Zs} \p{Space_Separator} (= \p{General_Category=Space_Separator}) (17) \p{Zyyy} \p{Common} (= \p{Script_Extensions= Common}) (7661) \p{Zzzz} \p{Unknown} (= \p{Script_Extensions= Unknown}) (970_188 plus all above- Unicode code points) =head2 Legal C<\p{}> and C<\P{}> constructs that match no characters Unicode has some property-value pairs that currently don't match anything. This happens generally either because they are obsolete, or they exist for symmetry with other forms, but no language has yet been encoded that uses them. In this version of Unicode, the following match zero code points: =over 4 =item \p{Canonical_Combining_Class=Attached_Below_Left} =item \p{Canonical_Combining_Class=CCC133} =item \p{Grapheme_Cluster_Break=E_Base} =item \p{Grapheme_Cluster_Break=E_Base_GAZ} =item \p{Grapheme_Cluster_Break=E_Modifier} =item \p{Grapheme_Cluster_Break=Glue_After_Zwj} =item \p{Word_Break=E_Base} =item \p{Word_Break=E_Base_GAZ} =item \p{Word_Break=E_Modifier} =item \p{Word_Break=Glue_After_Zwj} =back =head1 Properties accessible through Unicode::UCD The value of any Unicode (not including Perl extensions) character property mentioned above for any single code point is available through L<Unicode::UCD/charprop()>. L<Unicode::UCD/charprops_all()> returns the values of all the Unicode properties for a given code point. Besides these, all the Unicode character properties mentioned above (except for those marked as for internal use by Perl) are also accessible by L<Unicode::UCD/prop_invlist()>. Due to their nature, not all Unicode character properties are suitable for regular expression matches, nor C<prop_invlist()>. The remaining non-provisional, non-internal ones are accessible via L<Unicode::UCD/prop_invmap()> (except for those that this Perl installation hasn't included; see L<below for which those are|/Unicode character properties that are NOT accepted by Perl>). For compatibility with other parts of Perl, all the single forms given in the table in the L<section above|/Properties accessible through \p{} and \P{}> are recognized. BUT, there are some ambiguities between some Perl extensions and the Unicode properties, all of which are silently resolved in favor of the official Unicode property. To avoid surprises, you should only use C<prop_invmap()> for forms listed in the table below, which omits the non-recommended ones. The affected forms are the Perl single form equivalents of Unicode properties, such as C<\p{sc}> being a single-form equivalent of C<\p{gc=sc}>, which is treated by C<prop_invmap()> as the C<Script> property, whose short name is C<sc>. The table indicates the current ambiguities in the INFO column, beginning with the word C<"NOT">. The standard Unicode properties listed below are documented in L<http://www.unicode.org/reports/tr44/>; Perl_Decimal_Digit is documented in L<Unicode::UCD/prop_invmap()>. The other Perl extensions are in L<perlunicode/Other Properties>; The first column in the table is a name for the property; the second column is an alternative name, if any, plus possibly some annotations. The alternative name is the property's full name, unless that would simply repeat the first column, in which case the second column indicates the property's short name (if different). The annotations are given only in the entry for the full name. The annotations for binary properties include a list of the first few ranges that the property matches. To avoid any ambiguity, the SPACE character is represented as C<\x20>. If a property is obsolete, etc, the entry will be flagged with the same characters used in the table in the L<section above|/Properties accessible through \p{} and \P{}>, like B<D> or B<S>. NAME INFO Age AHex ASCII_Hex_Digit All (Perl extension). All code points, including those above Unicode. Same as qr/./s. U+0000..infinity Alnum XPosixAlnum. (Perl extension) Alpha Alphabetic Alphabetic (Short: Alpha). [A-Za-z\xaa\xb5\xba\xc0- \xd6\xd8-\xf6\xf8-\xff], U+0100..02C1, U+02C6..02D1, U+02E0..02E4, U+02EC, U+02EE ... Any (Perl extension). All Unicode code points. U+0000..10FFFF ASCII Block=Basic_Latin. (Perl extension). [\x00-\x7f] ASCII_Hex_Digit (Short: AHex). [0-9A-Fa-f] Assigned (Perl extension). All assigned code points. U+0000..0377, U+037A..037F, U+0384..038A, U+038C, U+038E..03A1, U+03A3..052F ... Bc Bidi_Class Bidi_C Bidi_Control Bidi_Class (Short: bc) Bidi_Control (Short: Bidi_C). U+061C, U+200E..200F, U+202A..202E, U+2066..2069 Bidi_M Bidi_Mirrored Bidi_Mirrored (Short: Bidi_M). [\(\)<>\[\]\{\}\xab \xbb], U+0F3A..0F3D, U+169B..169C, U+2039..203A, U+2045..2046, U+207D..207E ... Bidi_Mirroring_Glyph (Short: bmg) Bidi_Paired_Bracket (Short: bpb) Bidi_Paired_Bracket_Type (Short: bpt) Blank XPosixBlank. (Perl extension) Blk Block Block (Short: blk) Bmg Bidi_Mirroring_Glyph Bpb Bidi_Paired_Bracket Bpt Bidi_Paired_Bracket_Type Canonical_Combining_Class (Short: ccc) Case_Folding (Short: cf) Case_Ignorable (Short: CI). [\'.:\^`\xa8\xad\xaf\xb4 \xb7-\xb8], U+02B0..036F, U+0374..0375, U+037A, U+0384..0385, U+0387 ... Cased [A-Za-z\xaa\xb5\xba\xc0-\xd6\xd8-\xf6\xf8- \xff], U+0100..01BA, U+01BC..01BF, U+01C4..0293, U+0295..02B8, U+02C0..02C1 ... Category General_Category Ccc Canonical_Combining_Class CE Composition_Exclusion Cf Case_Folding; NOT 'cf' meaning 'General_Category=Format' Changes_When_Casefolded (Short: CWCF). [A-Z\xb5\xc0-\xd6\xd8- \xdf], U+0100, U+0102, U+0104, U+0106, U+0108 ... Changes_When_Casemapped (Short: CWCM). [A-Za-z\xb5\xc0-\xd6\xd8- \xf6\xf8-\xff], U+0100..0137, U+0139..018C, U+018E..019A, U+019C..01A9, U+01AC..01B9 ... Changes_When_Lowercased (Short: CWL). [A-Z\xc0-\xd6\xd8-\xde], U+0100, U+0102, U+0104, U+0106, U+0108 ... Changes_When_NFKC_Casefolded (Short: CWKCF). [A-Z\xa0\xa8\xaa \xad\xaf\xb2-\xb5\xb8-\xba\xbc-\xbe\xc0- \xd6\xd8-\xdf], U+0100, U+0102, U+0104, U+0106, U+0108 ... Changes_When_Titlecased (Short: CWT). [a-z\xb5\xdf-\xf6\xf8- \xff], U+0101, U+0103, U+0105, U+0107, U+0109 ... Changes_When_Uppercased (Short: CWU). [a-z\xb5\xdf-\xf6\xf8- \xff], U+0101, U+0103, U+0105, U+0107, U+0109 ... CI Case_Ignorable Cntrl XPosixCntrl (=General_Category=Control). (Perl extension) Comp_Ex Full_Composition_Exclusion Composition_Exclusion (Short: CE). U+0958..095F, U+09DC..09DD, U+09DF, U+0A33, U+0A36, U+0A59..0A5B ... CWCF Changes_When_Casefolded CWCM Changes_When_Casemapped CWKCF Changes_When_NFKC_Casefolded CWL Changes_When_Lowercased CWT Changes_When_Titlecased CWU Changes_When_Uppercased Dash [\-], U+058A, U+05BE, U+1400, U+1806, U+2010..2015 ... Decomposition_Mapping (Short: dm) Decomposition_Type (Short: dt) Default_Ignorable_Code_Point (Short: DI). [\xad], U+034F, U+061C, U+115F..1160, U+17B4..17B5, U+180B..180E ... Dep Deprecated Deprecated (Short: Dep). U+0149, U+0673, U+0F77, U+0F79, U+17A3..17A4, U+206A..206F ... DI Default_Ignorable_Code_Point Dia Diacritic Diacritic (Short: Dia). [\^`\xa8\xaf\xb4\xb7-\xb8], U+02B0..034E, U+0350..0357, U+035D..0362, U+0374..0375, U+037A ... Digit XPosixDigit (=General_Category= Decimal_Number). (Perl extension) Dm Decomposition_Mapping Dt Decomposition_Type Ea East_Asian_Width East_Asian_Width (Short: ea) EBase Emoji_Modifier_Base EComp Emoji_Component EMod Emoji_Modifier Emoji [#*0-9\xa9\xae], U+203C, U+2049, U+2122, U+2139, U+2194..2199 ... Emoji_Component (Short: EComp). [#*0-9], U+200D, U+20E3, U+FE0F, U+1F1E6..1F1FF, U+1F3FB..1F3FF ... Emoji_Modifier (Short: EMod). U+1F3FB..1F3FF Emoji_Modifier_Base (Short: EBase). U+261D, U+26F9, U+270A..270D, U+1F385, U+1F3C2..1F3C4, U+1F3C7 ... Emoji_Presentation (Short: EPres). U+231A..231B, U+23E9..23EC, U+23F0, U+23F3, U+25FD..25FE, U+2614..2615 ... EPres Emoji_Presentation EqUIdeo Equivalent_Unified_Ideograph Equivalent_Unified_Ideograph (Short: EqUIdeo) Ext Extender Extended_Pictographic (Short: ExtPict). [\xa9\xae], U+203C, U+2049, U+2122, U+2139, U+2194..2199 ... Extender (Short: Ext). [\xb7], U+02D0..02D1, U+0640, U+07FA, U+0B55, U+0E46 ... ExtPict Extended_Pictographic Full_Composition_Exclusion (Short: Comp_Ex). U+0340..0341, U+0343..0344, U+0374, U+037E, U+0387, U+0958..095F ... Gc General_Category GCB Grapheme_Cluster_Break General_Category (Short: gc) Gr_Base Grapheme_Base Gr_Ext Grapheme_Extend Graph XPosixGraph. (Perl extension) Grapheme_Base (Short: Gr_Base). [\x20-\x7e\xa0-\xac \xae-\xff], U+0100..02FF, U+0370..0377, U+037A..037F, U+0384..038A, U+038C ... Grapheme_Cluster_Break (Short: GCB) Grapheme_Extend (Short: Gr_Ext). U+0300..036F, U+0483..0489, U+0591..05BD, U+05BF, U+05C1..05C2, U+05C4..05C5 ... Hangul_Syllable_Type (Short: hst) Hex Hex_Digit Hex_Digit (Short: Hex). [0-9A-Fa-f], U+FF10..FF19, U+FF21..FF26, U+FF41..FF46 HorizSpace XPosixBlank. (Perl extension) Hst Hangul_Syllable_Type D Hyphen [\-\xad], U+058A, U+1806, U+2010..2011, U+2E17, U+30FB ... Supplanted by Line_Break property values; see www.unicode.org/reports/tr14 ID_Continue (Short: IDC). [0-9A-Z_a-z\xaa\xb5\xb7 \xba\xc0-\xd6\xd8-\xf6\xf8-\xff], U+0100..02C1, U+02C6..02D1, U+02E0..02E4, U+02EC, U+02EE ... ID_Start (Short: IDS). [A-Za-z\xaa\xb5\xba\xc0- \xd6\xd8-\xf6\xf8-\xff], U+0100..02C1, U+02C6..02D1, U+02E0..02E4, U+02EC, U+02EE ... IDC ID_Continue Identifier_Status Identifier_Type Ideo Ideographic Ideographic (Short: Ideo). U+3006..3007, U+3021..3029, U+3038..303A, U+3400..4DBF, U+4E00..9FFC, U+F900..FA6D ... IDS ID_Start IDS_Binary_Operator (Short: IDSB). U+2FF0..2FF1, U+2FF4..2FFB IDS_Trinary_Operator (Short: IDST). U+2FF2..2FF3 IDSB IDS_Binary_Operator IDST IDS_Trinary_Operator In Present_In. (Perl extension) Indic_Positional_Category (Short: InPC) Indic_Syllabic_Category (Short: InSC) InPC Indic_Positional_Category InSC Indic_Syllabic_Category Isc ISO_Comment; NOT 'isc' meaning 'General_Category=Other' ISO_Comment (Short: isc) Jg Joining_Group Join_C Join_Control Join_Control (Short: Join_C). U+200C..200D Joining_Group (Short: jg) Joining_Type (Short: jt) Jt Joining_Type Lb Line_Break Lc Lowercase_Mapping; NOT 'lc' meaning 'General_Category=Cased_Letter' Line_Break (Short: lb) LOE Logical_Order_Exception Logical_Order_Exception (Short: LOE). U+0E40..0E44, U+0EC0..0EC4, U+19B5..19B7, U+19BA, U+AAB5..AAB6, U+AAB9 ... Lower Lowercase Lowercase (Short: Lower). [a-z\xaa\xb5\xba\xdf- \xf6\xf8-\xff], U+0101, U+0103, U+0105, U+0107, U+0109 ... Lowercase_Mapping (Short: lc) Math [+<=>\^\|~\xac\xb1\xd7\xf7], U+03D0..03D2, U+03D5, U+03F0..03F1, U+03F4..03F6, U+0606..0608 ... Na Name Na1 Unicode_1_Name Name (Short: na) Name_Alias NChar Noncharacter_Code_Point NFC_QC NFC_Quick_Check NFC_Quick_Check (Short: NFC_QC) NFD_QC NFD_Quick_Check NFD_Quick_Check (Short: NFD_QC) NFKC_Casefold (Short: NFKC_CF) NFKC_CF NFKC_Casefold NFKC_QC NFKC_Quick_Check NFKC_Quick_Check (Short: NFKC_QC) NFKD_QC NFKD_Quick_Check NFKD_Quick_Check (Short: NFKD_QC) Noncharacter_Code_Point (Short: NChar). U+FDD0..FDEF, U+FFFE..FFFF, U+1FFFE..1FFFF, U+2FFFE..2FFFF, U+3FFFE..3FFFF, U+4FFFE..4FFFF ... Nt Numeric_Type Numeric_Type (Short: nt) Numeric_Value (Short: nv) Nv Numeric_Value Pat_Syn Pattern_Syntax Pat_WS Pattern_White_Space Pattern_Syntax (Short: Pat_Syn). [!\"#\$\%&\'\(\)*+,\-. \/:;<=>?\@\[\\\]\^`\{\|\}~\xa1-\xa7\xa9 \xab-\xac\xae\xb0-\xb1\xb6\xbb\xbf\xd7 \xf7], U+2010..2027, U+2030..203E, U+2041..2053, U+2055..205E, U+2190..245F ... Pattern_White_Space (Short: Pat_WS). [\t\n\cK\f\r\x20\x85], U+200E..200F, U+2028..2029 PCM Prepended_Concatenation_Mark Perl_Decimal_Digit (Perl extension) PerlSpace PosixSpace. (Perl extension) PerlWord PosixWord. (Perl extension) PosixAlnum (Perl extension). [0-9A-Za-z] PosixAlpha (Perl extension). [A-Za-z] PosixBlank (Perl extension). [\t\x20] PosixCntrl (Perl extension). ASCII control characters. ACK, BEL, BS, CAN, CR, DC1, DC2, DC3, DC4, DEL, DLE, ENQ, EOM, EOT, ESC, ETB, ETX, FF, FS, GS, HT, LF, NAK, NUL, RS, SI, SO, SOH, STX, SUB, SYN, US, VT PosixDigit (Perl extension). [0-9] PosixGraph (Perl extension). [!\"#\$\%&\'\(\)*+,\-. \/0-9:;<=>?\@A-Z\[\\\]\^_`a-z\{\|\}~] PosixLower (Perl extension). [a-z] PosixPrint (Perl extension). [\x20-\x7e] PosixPunct (Perl extension). [!\"#\$\%&\'\(\)*+,\-. \/:;<=>?\@\[\\\]\^_`\{\|\}~] PosixSpace (Perl extension). [\t\n\cK\f\r\x20] PosixUpper (Perl extension). [A-Z] PosixWord (Perl extension). \w, restricted to ASCII. [0-9A-Z_a-z] PosixXDigit ASCII_Hex_Digit. (Perl extension). [0-9A-Fa-f] Prepended_Concatenation_Mark (Short: PCM). U+0600..0605, U+06DD, U+070F, U+08E2, U+110BD, U+110CD Present_In (Short: In). (Perl extension) Print XPosixPrint. (Perl extension) Punct General_Category=Punctuation. (Perl extension). [!\"#\%&\'\(\)*,\-.\/:;?\@ \[\\\]_\{\}\xa1\xa7\xab\xb6-\xb7\xbb\xbf], U+037E, U+0387, U+055A..055F, U+0589..058A, U+05BE ... QMark Quotation_Mark Quotation_Mark (Short: QMark). [\"\'\xab\xbb], U+2018..201F, U+2039..203A, U+2E42, U+300C..300F, U+301D..301F ... Radical U+2E80..2E99, U+2E9B..2EF3, U+2F00..2FD5 Regional_Indicator (Short: RI). U+1F1E6..1F1FF RI Regional_Indicator SB Sentence_Break Sc Script; NOT 'sc' meaning 'General_Category=Currency_Symbol' Scf Simple_Case_Folding Script (Short: sc) Script_Extensions (Short: scx) Scx Script_Extensions SD Soft_Dotted Sentence_Break (Short: SB) Sentence_Terminal (Short: STerm). [!.?], U+0589, U+061E..061F, U+06D4, U+0700..0702, U+07F9 ... Sfc Simple_Case_Folding Simple_Case_Folding (Short: scf) Simple_Lowercase_Mapping (Short: slc) Simple_Titlecase_Mapping (Short: stc) Simple_Uppercase_Mapping (Short: suc) Slc Simple_Lowercase_Mapping Soft_Dotted (Short: SD). [i-j], U+012F, U+0249, U+0268, U+029D, U+02B2 ... Space White_Space SpacePerl XPosixSpace. (Perl extension) Stc Simple_Titlecase_Mapping STerm Sentence_Terminal Suc Simple_Uppercase_Mapping Tc Titlecase_Mapping Term Terminal_Punctuation Terminal_Punctuation (Short: Term). [!,.:;?], U+037E, U+0387, U+0589, U+05C3, U+060C ... Title Titlecase. (Perl extension) Titlecase (Short: Title). (Perl extension). (= \p{Gc=Lt}). U+01C5, U+01C8, U+01CB, U+01F2, U+1F88..1F8F, U+1F98..1F9F ... Titlecase_Mapping (Short: tc) Uc Uppercase_Mapping UIdeo Unified_Ideograph Unicode Any. (Perl extension) Unicode_1_Name (Short: na1) Unified_Ideograph (Short: UIdeo). U+3400..4DBF, U+4E00..9FFC, U+FA0E..FA0F, U+FA11, U+FA13..FA14, U+FA1F ... Upper Uppercase Uppercase (Short: Upper). [A-Z\xc0-\xd6\xd8-\xde], U+0100, U+0102, U+0104, U+0106, U+0108 ... Uppercase_Mapping (Short: uc) Variation_Selector (Short: VS). U+180B..180D, U+FE00..FE0F, U+E0100..E01EF Vertical_Orientation (Short: vo) VertSpace (Perl extension). \v. [\n\cK\f\r\x85], U+2028..2029 Vo Vertical_Orientation VS Variation_Selector WB Word_Break White_Space (Short: WSpace). [\t\n\cK\f\r\x20\x85 \xa0], U+1680, U+2000..200A, U+2028..2029, U+202F, U+205F ... Word XPosixWord. (Perl extension) Word_Break (Short: WB) WSpace White_Space XDigit XPosixXDigit (=Hex_Digit). (Perl extension) XID_Continue (Short: XIDC). [0-9A-Z_a-z\xaa\xb5\xb7 \xba\xc0-\xd6\xd8-\xf6\xf8-\xff], U+0100..02C1, U+02C6..02D1, U+02E0..02E4, U+02EC, U+02EE ... XID_Start (Short: XIDS). [A-Za-z\xaa\xb5\xba\xc0- \xd6\xd8-\xf6\xf8-\xff], U+0100..02C1, U+02C6..02D1, U+02E0..02E4, U+02EC, U+02EE ... XIDC XID_Continue XIDS XID_Start XPerlSpace XPosixSpace. (Perl extension) XPosixAlnum (Short: Alnum). (Perl extension). Alphabetic and (decimal) Numeric. [0-9A- Za-z\xaa\xb5\xba\xc0-\xd6\xd8-\xf6\xf8- \xff], U+0100..02C1, U+02C6..02D1, U+02E0..02E4, U+02EC, U+02EE ... XPosixAlpha Alphabetic. (Perl extension). [A-Za-z \xaa\xb5\xba\xc0-\xd6\xd8-\xf6\xf8-\xff], U+0100..02C1, U+02C6..02D1, U+02E0..02E4, U+02EC, U+02EE ... XPosixBlank (Short: Blank). (Perl extension). \h, Horizontal white space. [\t\x20\xa0], U+1680, U+2000..200A, U+202F, U+205F, U+3000 XPosixCntrl General_Category=Control (Short: Cntrl). (Perl extension). Control characters. [\x00-\x1f\x7f-\x9f] XPosixDigit General_Category=Decimal_Number (Short: Digit). (Perl extension). [0-9] + all other decimal digits. [0-9], U+0660..0669, U+06F0..06F9, U+07C0..07C9, U+0966..096F, U+09E6..09EF ... XPosixGraph (Short: Graph). (Perl extension). Characters that are graphical. [!\"#\$ \%&\'\(\)*+,\-.\/0-9:;<=>?\@A-Z\[\\\] \^_`a-z\{\|\}~\xa1-\xff], U+0100..0377, U+037A..037F, U+0384..038A, U+038C, U+038E..03A1 ... XPosixLower Lowercase. (Perl extension). [a-z\xaa \xb5\xba\xdf-\xf6\xf8-\xff], U+0101, U+0103, U+0105, U+0107, U+0109 ... XPosixPrint (Short: Print). (Perl extension). Characters that are graphical plus space characters (but no controls). [\x20-\x7e \xa0-\xff], U+0100..0377, U+037A..037F, U+0384..038A, U+038C, U+038E..03A1 ... XPosixPunct (Perl extension). \p{Punct} + ASCII-range \p{Symbol}. [!\"#\$\%&\'\(\)*+,\-.\/:;<= >?\@\[\\\]\^_`\{\|\}~\xa1\xa7\xab\xb6- \xb7\xbb\xbf], U+037E, U+0387, U+055A..055F, U+0589..058A, U+05BE ... XPosixSpace (Perl extension). \s including beyond ASCII and vertical tab. [\t\n\cK\f\r\x20 \x85\xa0], U+1680, U+2000..200A, U+2028..2029, U+202F, U+205F ... XPosixUpper Uppercase. (Perl extension). [A-Z\xc0- \xd6\xd8-\xde], U+0100, U+0102, U+0104, U+0106, U+0108 ... XPosixWord (Short: Word). (Perl extension). \w, including beyond ASCII; = \p{Alnum} + \pM + \p{Pc} + \p{Join_Control}. [0-9A-Z_a-z \xaa\xb5\xba\xc0-\xd6\xd8-\xf6\xf8-\xff], U+0100..02C1, U+02C6..02D1, U+02E0..02E4, U+02EC, U+02EE ... XPosixXDigit Hex_Digit (Short: XDigit). (Perl extension). [0-9A-Fa-f], U+FF10..FF19, U+FF21..FF26, U+FF41..FF46 =head1 Properties accessible through other means Certain properties are accessible also via core function calls. These are: Lowercase_Mapping lc() and lcfirst() Titlecase_Mapping ucfirst() Uppercase_Mapping uc() Also, Case_Folding is accessible through the C</i> modifier in regular expressions, the C<\F> transliteration escape, and the C<L<fc|perlfunc/fc>> operator. Besides being able to say C<\p{Name=...}>, the Name and Name_Aliases properties are accessible through the C<\N{}> interpolation in double-quoted strings and regular expressions; and functions C<charnames::viacode()>, C<charnames::vianame()>, and C<charnames::string_vianame()> (which require a C<use charnames ();> to be specified. Finally, most properties related to decomposition are accessible via L<Unicode::Normalize>. =head1 Unicode character properties that are NOT accepted by Perl Perl will generate an error for a few character properties in Unicode when used in a regular expression. The non-Unihan ones are listed below, with the reasons they are not accepted, perhaps with work-arounds. The short names for the properties are listed enclosed in (parentheses). As described after the list, an installation can change the defaults and choose to accept any of these. The list is machine generated based on the choices made for the installation that generated this document. =over 4 =item I<Expands_On_NFC> (XO_NFC) =item I<Expands_On_NFD> (XO_NFD) =item I<Expands_On_NFKC> (XO_NFKC) =item I<Expands_On_NFKD> (XO_NFKD) Deprecated by Unicode. These are characters that expand to more than one character in the specified normalization form, but whether they actually take up more bytes or not depends on the encoding being used. For example, a UTF-8 encoded character may expand to a different number of bytes than a UTF-32 encoded character. =item I<Grapheme_Link> (Gr_Link) Duplicates ccc=vr (Canonical_Combining_Class=Virama) =item I<Jamo_Short_Name> (JSN) =item I<Other_Alphabetic> (OAlpha) =item I<Other_Default_Ignorable_Code_Point> (ODI) =item I<Other_Grapheme_Extend> (OGr_Ext) =item I<Other_ID_Continue> (OIDC) =item I<Other_ID_Start> (OIDS) =item I<Other_Lowercase> (OLower) =item I<Other_Math> (OMath) =item I<Other_Uppercase> (OUpper) Used by Unicode internally for generating other properties and not intended to be used stand-alone =item I<Script=Katakana_Or_Hiragana> (sc=Hrkt) Obsolete. All code points previously matched by this have been moved to "Script=Common". Consider instead using "Script_Extensions=Katakana" or "Script_Extensions=Hiragana" (or both) =item I<Script_Extensions=Katakana_Or_Hiragana> (scx=Hrkt) All code points that would be matched by this are matched by either "Script_Extensions=Katakana" or "Script_Extensions=Hiragana" =back An installation can choose to allow any of these to be matched by downloading the Unicode database from L<http://www.unicode.org/Public/> to C<$Config{privlib}>/F<unicore/> in the Perl source tree, changing the controlling lists contained in the program C<$Config{privlib}>/F<unicore/mktables> and then re-compiling and installing. (C<%Config> is available from the Config module). Also, perl can be recompiled to operate on an earlier version of the Unicode standard. Further information is at C<$Config{privlib}>/F<unicore/README.perl>. =head1 Other information in the Unicode data base The Unicode data base is delivered in two different formats. The XML version is valid for more modern Unicode releases. The other version is a collection of files. The two are intended to give equivalent information. Perl uses the older form; this allows you to recompile Perl to use early Unicode releases. The only non-character property that Perl currently supports is Named Sequences, in which a sequence of code points is given a name and generally treated as a single entity. (Perl supports these via the C<\N{...}> double-quotish construct, L<charnames/charnames::string_vianame(name)>, and L<Unicode::UCD/namedseq()>. Below is a list of the files in the Unicode data base that Perl doesn't currently use, along with very brief descriptions of their purposes. Some of the names of the files have been shortened from those that Unicode uses, in order to allow them to be distinguishable from similarly named files on file systems for which only the first 8 characters of a name are significant. =over 4 =item F<auxiliary/GraphemeBreakTest.html> =item F<auxiliary/LineBreakTest.html> =item F<auxiliary/SentenceBreakTest.html> =item F<auxiliary/WordBreakTest.html> Documentation of validation Tests =item F<BidiCharacterTest.txt> =item F<BidiTest.txt> =item F<NormTest.txt> Validation Tests =item F<CJKRadicals.txt> Maps the kRSUnicode property values to corresponding code points =item F<emoji/ReadMe.txt> =item F<ReadMe.txt> Documentation =item F<EmojiSources.txt> Maps certain Unicode code points to their legacy Japanese cell-phone values =item F<extracted/DName.txt> This file adds no new information not already present in other files =item F<Index.txt> Alphabetical index of Unicode characters =item F<NamedSqProv.txt> Named sequences proposed for inclusion in a later version of the Unicode Standard; if you need them now, you can append this file to F<NamedSequences.txt> and recompile perl =item F<NamesList.html> Describes the format and contents of F<NamesList.txt> =item F<NamesList.txt> Annotated list of characters =item F<NormalizationCorrections.txt> Documentation of corrections already incorporated into the Unicode data base =item F<NushuSources.txt> Specifies source material for Nushu characters =item F<StandardizedVariants.html> Obsoleted as of Unicode 9.0, but previously provided a visual display of the standard variant sequences derived from F<StandardizedVariants.txt>. =item F<StandardizedVariants.txt> Certain glyph variations for character display are standardized. This lists the non-Unihan ones; the Unihan ones are also not used by Perl, and are in a separate Unicode data base L<http://www.unicode.org/ivd> =item F<TangutSources.txt> Specifies source mappings for Tangut ideographs and components. This data file also includes informative radical-stroke values that are used internally by Unicode =item F<USourceData.txt> Documentation of status and cross reference of proposals for encoding by Unicode of Unihan characters =item F<USourceGlyphs.pdf> Pictures of the characters in F<USourceData.txt> =back =head1 SEE ALSO L<http://www.unicode.org/reports/tr44/> L<perlrecharclass> L<perlunicode> perlintern.pod 0000644 00000243155 15125556335 0007456 0 ustar 00 -*- buffer-read-only: t -*- !!!!!!! DO NOT EDIT THIS FILE !!!!!!! This file is built by autodoc.pl extracting documentation from the C source files. Any changes made here will be lost! =head1 NAME perlintern - autogenerated documentation of purely B<internal> Perl functions =head1 DESCRIPTION X<internal Perl functions> X<interpreter functions> This file is the autogenerated documentation of functions in the Perl interpreter that are documented using Perl's internal documentation format but are not marked as part of the Perl API. In other words, B<they are not for use in extensions>! =head1 Array Manipulation Functions =over 8 =item AvFILLp X<AvFILLp> int AvFILLp(AV* av) =for hackers Found in file av.h =back =head1 Compile-time scope hooks =over 8 =item BhkENTRY X<BhkENTRY> NOTE: this function is experimental and may change or be removed without notice. Return an entry from the BHK structure. C<which> is a preprocessor token indicating which entry to return. If the appropriate flag is not set this will return C<NULL>. The type of the return value depends on which entry you ask for. void * BhkENTRY(BHK *hk, which) =for hackers Found in file op.h =item BhkFLAGS X<BhkFLAGS> NOTE: this function is experimental and may change or be removed without notice. Return the BHK's flags. U32 BhkFLAGS(BHK *hk) =for hackers Found in file op.h =item CALL_BLOCK_HOOKS X<CALL_BLOCK_HOOKS> NOTE: this function is experimental and may change or be removed without notice. Call all the registered block hooks for type C<which>. C<which> is a preprocessing token; the type of C<arg> depends on C<which>. void CALL_BLOCK_HOOKS(which, arg) =for hackers Found in file op.h =back =head1 Custom Operators =over 8 =item core_prototype X<core_prototype> This function assigns the prototype of the named core function to C<sv>, or to a new mortal SV if C<sv> is C<NULL>. It returns the modified C<sv>, or C<NULL> if the core function has no prototype. C<code> is a code as returned by C<keyword()>. It must not be equal to 0. SV * core_prototype(SV *sv, const char *name, const int code, int * const opnum) =for hackers Found in file op.c =back =head1 CV Manipulation Functions =over 8 =item docatch X<docatch> Check for the cases 0 or 3 of cur_env.je_ret, only used inside an eval context. 0 is used as continue inside eval, 3 is used for a die caught by an inner eval - continue inner loop See F<cop.h>: je_mustcatch, when set at any runlevel to TRUE, means eval ops must establish a local jmpenv to handle exception traps. OP* docatch(Perl_ppaddr_t firstpp) =for hackers Found in file pp_ctl.c =back =head1 CV reference counts and CvOUTSIDE =over 8 =item CvWEAKOUTSIDE X<CvWEAKOUTSIDE> Each CV has a pointer, C<CvOUTSIDE()>, to its lexically enclosing CV (if any). Because pointers to anonymous sub prototypes are stored in C<&> pad slots, it is a possible to get a circular reference, with the parent pointing to the child and vice-versa. To avoid the ensuing memory leak, we do not increment the reference count of the CV pointed to by C<CvOUTSIDE> in the I<one specific instance> that the parent has a C<&> pad slot pointing back to us. In this case, we set the C<CvWEAKOUTSIDE> flag in the child. This allows us to determine under what circumstances we should decrement the refcount of the parent when freeing the child. There is a further complication with non-closure anonymous subs (i.e. those that do not refer to any lexicals outside that sub). In this case, the anonymous prototype is shared rather than being cloned. This has the consequence that the parent may be freed while there are still active children, I<e.g.>, BEGIN { $a = sub { eval '$x' } } In this case, the BEGIN is freed immediately after execution since there are no active references to it: the anon sub prototype has C<CvWEAKOUTSIDE> set since it's not a closure, and $a points to the same CV, so it doesn't contribute to BEGIN's refcount either. When $a is executed, the C<eval '$x'> causes the chain of C<CvOUTSIDE>s to be followed, and the freed BEGIN is accessed. To avoid this, whenever a CV and its associated pad is freed, any C<&> entries in the pad are explicitly removed from the pad, and if the refcount of the pointed-to anon sub is still positive, then that child's C<CvOUTSIDE> is set to point to its grandparent. This will only occur in the single specific case of a non-closure anon prototype having one or more active references (such as C<$a> above). One other thing to consider is that a CV may be merely undefined rather than freed, eg C<undef &foo>. In this case, its refcount may not have reached zero, but we still delete its pad and its C<CvROOT> etc. Since various children may still have their C<CvOUTSIDE> pointing at this undefined CV, we keep its own C<CvOUTSIDE> for the time being, so that the chain of lexical scopes is unbroken. For example, the following should print 123: my $x = 123; sub tmp { sub { eval '$x' } } my $a = tmp(); undef &tmp; print $a->(); bool CvWEAKOUTSIDE(CV *cv) =for hackers Found in file cv.h =back =head1 Embedding Functions =over 8 =item cv_dump X<cv_dump> dump the contents of a CV void cv_dump(const CV *cv, const char *title) =for hackers Found in file pad.c =item cv_forget_slab X<cv_forget_slab> When a CV has a reference count on its slab (C<CvSLABBED>), it is responsible for making sure it is freed. (Hence, no two CVs should ever have a reference count on the same slab.) The CV only needs to reference the slab during compilation. Once it is compiled and C<CvROOT> attached, it has finished its job, so it can forget the slab. void cv_forget_slab(CV *cv) =for hackers Found in file pad.c =item do_dump_pad X<do_dump_pad> Dump the contents of a padlist void do_dump_pad(I32 level, PerlIO *file, PADLIST *padlist, int full) =for hackers Found in file pad.c =item pad_alloc_name X<pad_alloc_name> Allocates a place in the currently-compiling pad (via L<perlapi/pad_alloc>) and then stores a name for that entry. C<name> is adopted and becomes the name entry; it must already contain the name string. C<typestash> and C<ourstash> and the C<padadd_STATE> flag get added to C<name>. None of the other processing of L<perlapi/pad_add_name_pvn> is done. Returns the offset of the allocated pad slot. PADOFFSET pad_alloc_name(PADNAME *name, U32 flags, HV *typestash, HV *ourstash) =for hackers Found in file pad.c =item pad_block_start X<pad_block_start> Update the pad compilation state variables on entry to a new block. void pad_block_start(int full) =for hackers Found in file pad.c =item pad_check_dup X<pad_check_dup> Check for duplicate declarations: report any of: * a 'my' in the current scope with the same name; * an 'our' (anywhere in the pad) with the same name and the same stash as 'ourstash' C<is_our> indicates that the name to check is an C<"our"> declaration. void pad_check_dup(PADNAME *name, U32 flags, const HV *ourstash) =for hackers Found in file pad.c =item pad_findlex X<pad_findlex> Find a named lexical anywhere in a chain of nested pads. Add fake entries in the inner pads if it's found in an outer one. Returns the offset in the bottom pad of the lex or the fake lex. C<cv> is the CV in which to start the search, and seq is the current C<cop_seq> to match against. If C<warn> is true, print appropriate warnings. The C<out_>* vars return values, and so are pointers to where the returned values should be stored. C<out_capture>, if non-null, requests that the innermost instance of the lexical is captured; C<out_name> is set to the innermost matched pad name or fake pad name; C<out_flags> returns the flags normally associated with the C<PARENT_FAKELEX_FLAGS> field of a fake pad name. Note that C<pad_findlex()> is recursive; it recurses up the chain of CVs, then comes back down, adding fake entries as it goes. It has to be this way because fake names in anon protoypes have to store in C<xpadn_low> the index into the parent pad. PADOFFSET pad_findlex(const char *namepv, STRLEN namelen, U32 flags, const CV* cv, U32 seq, int warn, SV** out_capture, PADNAME** out_name, int *out_flags) =for hackers Found in file pad.c =item pad_fixup_inner_anons X<pad_fixup_inner_anons> For any anon CVs in the pad, change C<CvOUTSIDE> of that CV from C<old_cv> to C<new_cv> if necessary. Needed when a newly-compiled CV has to be moved to a pre-existing CV struct. void pad_fixup_inner_anons(PADLIST *padlist, CV *old_cv, CV *new_cv) =for hackers Found in file pad.c =item pad_free X<pad_free> Free the SV at offset po in the current pad. void pad_free(PADOFFSET po) =for hackers Found in file pad.c =item pad_leavemy X<pad_leavemy> Cleanup at end of scope during compilation: set the max seq number for lexicals in this scope and warn of any lexicals that never got introduced. OP * pad_leavemy() =for hackers Found in file pad.c =item padlist_dup X<padlist_dup> Duplicates a pad. PADLIST * padlist_dup(PADLIST *srcpad, CLONE_PARAMS *param) =for hackers Found in file pad.c =item padname_dup X<padname_dup> Duplicates a pad name. PADNAME * padname_dup(PADNAME *src, CLONE_PARAMS *param) =for hackers Found in file pad.c =item padnamelist_dup X<padnamelist_dup> Duplicates a pad name list. PADNAMELIST * padnamelist_dup(PADNAMELIST *srcpad, CLONE_PARAMS *param) =for hackers Found in file pad.c =item pad_push X<pad_push> Push a new pad frame onto the padlist, unless there's already a pad at this depth, in which case don't bother creating a new one. Then give the new pad an C<@_> in slot zero. void pad_push(PADLIST *padlist, int depth) =for hackers Found in file pad.c =item pad_reset X<pad_reset> Mark all the current temporaries for reuse void pad_reset() =for hackers Found in file pad.c =item pad_swipe X<pad_swipe> Abandon the tmp in the current pad at offset C<po> and replace with a new one. void pad_swipe(PADOFFSET po, bool refadjust) =for hackers Found in file pad.c =back =head1 Errno =over 8 =item dSAVEDERRNO X<dSAVEDERRNO> Declare variables needed to save C<errno> and any operating system specific error number. void dSAVEDERRNO =for hackers Found in file perl.h =item dSAVE_ERRNO X<dSAVE_ERRNO> Declare variables needed to save C<errno> and any operating system specific error number, and save them for optional later restoration by C<RESTORE_ERRNO>. void dSAVE_ERRNO =for hackers Found in file perl.h =item RESTORE_ERRNO X<RESTORE_ERRNO> Restore C<errno> and any operating system specific error number that was saved by C<dSAVE_ERRNO> or C<RESTORE_ERRNO>. void RESTORE_ERRNO =for hackers Found in file perl.h =item SAVE_ERRNO X<SAVE_ERRNO> Save C<errno> and any operating system specific error number for optional later restoration by C<RESTORE_ERRNO>. Requires C<dSAVEDERRNO> or C<dSAVE_ERRNO> in scope. void SAVE_ERRNO =for hackers Found in file perl.h =item SETERRNO X<SETERRNO> Set C<errno>, and on VMS set C<vaxc$errno>. void SETERRNO(int errcode, int vmserrcode) =for hackers Found in file perl.h =back =head1 GV Functions =over 8 =item gv_try_downgrade X<gv_try_downgrade> NOTE: this function is experimental and may change or be removed without notice. If the typeglob C<gv> can be expressed more succinctly, by having something other than a real GV in its place in the stash, replace it with the optimised form. Basic requirements for this are that C<gv> is a real typeglob, is sufficiently ordinary, and is only referenced from its package. This function is meant to be used when a GV has been looked up in part to see what was there, causing upgrading, but based on what was found it turns out that the real GV isn't required after all. If C<gv> is a completely empty typeglob, it is deleted from the stash. If C<gv> is a typeglob containing only a sufficiently-ordinary constant sub, the typeglob is replaced with a scalar-reference placeholder that more compactly represents the same thing. void gv_try_downgrade(GV* gv) =for hackers Found in file gv.c =back =head1 Hash Manipulation Functions =over 8 =item hv_ename_add X<hv_ename_add> Adds a name to a stash's internal list of effective names. See C<L</hv_ename_delete>>. This is called when a stash is assigned to a new location in the symbol table. void hv_ename_add(HV *hv, const char *name, U32 len, U32 flags) =for hackers Found in file hv.c =item hv_ename_delete X<hv_ename_delete> Removes a name from a stash's internal list of effective names. If this is the name returned by C<HvENAME>, then another name in the list will take its place (C<HvENAME> will use it). This is called when a stash is deleted from the symbol table. void hv_ename_delete(HV *hv, const char *name, U32 len, U32 flags) =for hackers Found in file hv.c =item refcounted_he_chain_2hv X<refcounted_he_chain_2hv> Generates and returns a C<HV *> representing the content of a C<refcounted_he> chain. C<flags> is currently unused and must be zero. HV * refcounted_he_chain_2hv( const struct refcounted_he *c, U32 flags ) =for hackers Found in file hv.c =item refcounted_he_fetch_pv X<refcounted_he_fetch_pv> Like L</refcounted_he_fetch_pvn>, but takes a nul-terminated string instead of a string/length pair. SV * refcounted_he_fetch_pv( const struct refcounted_he *chain, const char *key, U32 hash, U32 flags ) =for hackers Found in file hv.c =item refcounted_he_fetch_pvn X<refcounted_he_fetch_pvn> Search along a C<refcounted_he> chain for an entry with the key specified by C<keypv> and C<keylen>. If C<flags> has the C<REFCOUNTED_HE_KEY_UTF8> bit set, the key octets are interpreted as UTF-8, otherwise they are interpreted as Latin-1. C<hash> is a precomputed hash of the key string, or zero if it has not been precomputed. Returns a mortal scalar representing the value associated with the key, or C<&PL_sv_placeholder> if there is no value associated with the key. SV * refcounted_he_fetch_pvn( const struct refcounted_he *chain, const char *keypv, STRLEN keylen, U32 hash, U32 flags ) =for hackers Found in file hv.c =item refcounted_he_fetch_pvs X<refcounted_he_fetch_pvs> Like L</refcounted_he_fetch_pvn>, but takes a literal string instead of a string/length pair, and no precomputed hash. SV * refcounted_he_fetch_pvs( const struct refcounted_he *chain, "key", U32 flags ) =for hackers Found in file hv.h =item refcounted_he_fetch_sv X<refcounted_he_fetch_sv> Like L</refcounted_he_fetch_pvn>, but takes a Perl scalar instead of a string/length pair. SV * refcounted_he_fetch_sv( const struct refcounted_he *chain, SV *key, U32 hash, U32 flags ) =for hackers Found in file hv.c =item refcounted_he_free X<refcounted_he_free> Decrements the reference count of a C<refcounted_he> by one. If the reference count reaches zero the structure's memory is freed, which (recursively) causes a reduction of its parent C<refcounted_he>'s reference count. It is safe to pass a null pointer to this function: no action occurs in this case. void refcounted_he_free(struct refcounted_he *he) =for hackers Found in file hv.c =item refcounted_he_inc X<refcounted_he_inc> Increment the reference count of a C<refcounted_he>. The pointer to the C<refcounted_he> is also returned. It is safe to pass a null pointer to this function: no action occurs and a null pointer is returned. struct refcounted_he * refcounted_he_inc( struct refcounted_he *he ) =for hackers Found in file hv.c =item refcounted_he_new_pv X<refcounted_he_new_pv> Like L</refcounted_he_new_pvn>, but takes a nul-terminated string instead of a string/length pair. struct refcounted_he * refcounted_he_new_pv( struct refcounted_he *parent, const char *key, U32 hash, SV *value, U32 flags ) =for hackers Found in file hv.c =item refcounted_he_new_pvn X<refcounted_he_new_pvn> Creates a new C<refcounted_he>. This consists of a single key/value pair and a reference to an existing C<refcounted_he> chain (which may be empty), and thus forms a longer chain. When using the longer chain, the new key/value pair takes precedence over any entry for the same key further along the chain. The new key is specified by C<keypv> and C<keylen>. If C<flags> has the C<REFCOUNTED_HE_KEY_UTF8> bit set, the key octets are interpreted as UTF-8, otherwise they are interpreted as Latin-1. C<hash> is a precomputed hash of the key string, or zero if it has not been precomputed. C<value> is the scalar value to store for this key. C<value> is copied by this function, which thus does not take ownership of any reference to it, and later changes to the scalar will not be reflected in the value visible in the C<refcounted_he>. Complex types of scalar will not be stored with referential integrity, but will be coerced to strings. C<value> may be either null or C<&PL_sv_placeholder> to indicate that no value is to be associated with the key; this, as with any non-null value, takes precedence over the existence of a value for the key further along the chain. C<parent> points to the rest of the C<refcounted_he> chain to be attached to the new C<refcounted_he>. This function takes ownership of one reference to C<parent>, and returns one reference to the new C<refcounted_he>. struct refcounted_he * refcounted_he_new_pvn( struct refcounted_he *parent, const char *keypv, STRLEN keylen, U32 hash, SV *value, U32 flags ) =for hackers Found in file hv.c =item refcounted_he_new_pvs X<refcounted_he_new_pvs> Like L</refcounted_he_new_pvn>, but takes a literal string instead of a string/length pair, and no precomputed hash. struct refcounted_he * refcounted_he_new_pvs( struct refcounted_he *parent, "key", SV *value, U32 flags ) =for hackers Found in file hv.h =item refcounted_he_new_sv X<refcounted_he_new_sv> Like L</refcounted_he_new_pvn>, but takes a Perl scalar instead of a string/length pair. struct refcounted_he * refcounted_he_new_sv( struct refcounted_he *parent, SV *key, U32 hash, SV *value, U32 flags ) =for hackers Found in file hv.c =back =head1 IO Functions =over 8 =item start_glob X<start_glob> NOTE: this function is experimental and may change or be removed without notice. Function called by C<do_readline> to spawn a glob (or do the glob inside perl on VMS). This code used to be inline, but now perl uses C<File::Glob> this glob starter is only used by miniperl during the build process, or when PERL_EXTERNAL_GLOB is defined. Moving it away shrinks F<pp_hot.c>; shrinking F<pp_hot.c> helps speed perl up. NOTE: this function must be explicitly called as Perl_start_glob with an aTHX_ parameter. PerlIO* Perl_start_glob(pTHX_ SV *tmpglob, IO *io) =for hackers Found in file doio.c =back =head1 Lexer interface =over 8 =item validate_proto X<validate_proto> NOTE: this function is experimental and may change or be removed without notice. This function performs syntax checking on a prototype, C<proto>. If C<warn> is true, any illegal characters or mismatched brackets will trigger illegalproto warnings, declaring that they were detected in the prototype for C<name>. The return value is C<true> if this is a valid prototype, and C<false> if it is not, regardless of whether C<warn> was C<true> or C<false>. Note that C<NULL> is a valid C<proto> and will always return C<true>. bool validate_proto(SV *name, SV *proto, bool warn, bool curstash) =for hackers Found in file toke.c =back =head1 Magical Functions =over 8 =item magic_clearhint X<magic_clearhint> Triggered by a delete from C<%^H>, records the key to C<PL_compiling.cop_hints_hash>. int magic_clearhint(SV* sv, MAGIC* mg) =for hackers Found in file mg.c =item magic_clearhints X<magic_clearhints> Triggered by clearing C<%^H>, resets C<PL_compiling.cop_hints_hash>. int magic_clearhints(SV* sv, MAGIC* mg) =for hackers Found in file mg.c =item magic_methcall X<magic_methcall> Invoke a magic method (like FETCH). C<sv> and C<mg> are the tied thingy and the tie magic. C<meth> is the name of the method to call. C<argc> is the number of args (in addition to $self) to pass to the method. The C<flags> can be: G_DISCARD invoke method with G_DISCARD flag and don't return a value G_UNDEF_FILL fill the stack with argc pointers to PL_sv_undef The arguments themselves are any values following the C<flags> argument. Returns the SV (if any) returned by the method, or C<NULL> on failure. NOTE: this function must be explicitly called as Perl_magic_methcall with an aTHX_ parameter. SV* Perl_magic_methcall(pTHX_ SV *sv, const MAGIC *mg, SV *meth, U32 flags, U32 argc, ...) =for hackers Found in file mg.c =item magic_sethint X<magic_sethint> Triggered by a store to C<%^H>, records the key/value pair to C<PL_compiling.cop_hints_hash>. It is assumed that hints aren't storing anything that would need a deep copy. Maybe we should warn if we find a reference. int magic_sethint(SV* sv, MAGIC* mg) =for hackers Found in file mg.c =item mg_localize X<mg_localize> Copy some of the magic from an existing SV to new localized version of that SV. Container magic (I<e.g.>, C<%ENV>, C<$1>, C<tie>) gets copied, value magic doesn't (I<e.g.>, C<taint>, C<pos>). If C<setmagic> is false then no set magic will be called on the new (empty) SV. This typically means that assignment will soon follow (e.g. S<C<'local $x = $y'>>), and that will handle the magic. void mg_localize(SV* sv, SV* nsv, bool setmagic) =for hackers Found in file mg.c =back =head1 Miscellaneous Functions =over 8 =item free_c_backtrace X<free_c_backtrace> Deallocates a backtrace received from get_c_bracktrace. void free_c_backtrace(Perl_c_backtrace* bt) =for hackers Found in file util.c =item get_c_backtrace X<get_c_backtrace> Collects the backtrace (aka "stacktrace") into a single linear malloced buffer, which the caller B<must> C<Perl_free_c_backtrace()>. Scans the frames back by S<C<depth + skip>>, then drops the C<skip> innermost, returning at most C<depth> frames. Perl_c_backtrace* get_c_backtrace(int max_depth, int skip) =for hackers Found in file util.c =item quadmath_format_needed X<quadmath_format_needed> C<quadmath_format_needed()> returns true if the C<format> string seems to contain at least one non-Q-prefixed C<%[efgaEFGA]> format specifier, or returns false otherwise. The format specifier detection is not complete printf-syntax detection, but it should catch most common cases. If true is returned, those arguments B<should> in theory be processed with C<quadmath_snprintf()>, but in case there is more than one such format specifier (see L</quadmath_format_valid>), and if there is anything else beyond that one (even just a single byte), they B<cannot> be processed because C<quadmath_snprintf()> is very strict, accepting only one format spec, and nothing else. In this case, the code should probably fail. bool quadmath_format_needed(const char* format) =for hackers Found in file util.c =item quadmath_format_valid X<quadmath_format_valid> C<quadmath_snprintf()> is very strict about its C<format> string and will fail, returning -1, if the format is invalid. It accepts exactly one format spec. C<quadmath_format_valid()> checks that the intended single spec looks sane: begins with C<%>, has only one C<%>, ends with C<[efgaEFGA]>, and has C<Q> before it. This is not a full "printf syntax check", just the basics. Returns true if it is valid, false if not. See also L</quadmath_format_needed>. bool quadmath_format_valid(const char* format) =for hackers Found in file util.c =back =head1 MRO Functions =over 8 =item mro_get_linear_isa_dfs X<mro_get_linear_isa_dfs> Returns the Depth-First Search linearization of C<@ISA> the given stash. The return value is a read-only AV*. C<level> should be 0 (it is used internally in this function's recursion). You are responsible for C<SvREFCNT_inc()> on the return value if you plan to store it anywhere semi-permanently (otherwise it might be deleted out from under you the next time the cache is invalidated). AV* mro_get_linear_isa_dfs(HV* stash, U32 level) =for hackers Found in file mro_core.c =item mro_isa_changed_in X<mro_isa_changed_in> Takes the necessary steps (cache invalidations, mostly) when the C<@ISA> of the given package has changed. Invoked by the C<setisa> magic, should not need to invoke directly. void mro_isa_changed_in(HV* stash) =for hackers Found in file mro_core.c =item mro_package_moved X<mro_package_moved> Call this function to signal to a stash that it has been assigned to another spot in the stash hierarchy. C<stash> is the stash that has been assigned. C<oldstash> is the stash it replaces, if any. C<gv> is the glob that is actually being assigned to. This can also be called with a null first argument to indicate that C<oldstash> has been deleted. This function invalidates isa caches on the old stash, on all subpackages nested inside it, and on the subclasses of all those, including non-existent packages that have corresponding entries in C<stash>. It also sets the effective names (C<HvENAME>) on all the stashes as appropriate. If the C<gv> is present and is not in the symbol table, then this function simply returns. This checked will be skipped if C<flags & 1>. void mro_package_moved(HV * const stash, HV * const oldstash, const GV * const gv, U32 flags) =for hackers Found in file mro_core.c =back =head1 Numeric functions =over 8 =item grok_atoUV X<grok_atoUV> parse a string, looking for a decimal unsigned integer. On entry, C<pv> points to the beginning of the string; C<valptr> points to a UV that will receive the converted value, if found; C<endptr> is either NULL or points to a variable that points to one byte beyond the point in C<pv> that this routine should examine. If C<endptr> is NULL, C<pv> is assumed to be NUL-terminated. Returns FALSE if C<pv> doesn't represent a valid unsigned integer value (with no leading zeros). Otherwise it returns TRUE, and sets C<*valptr> to that value. If you constrain the portion of C<pv> that is looked at by this function (by passing a non-NULL C<endptr>), and if the intial bytes of that portion form a valid value, it will return TRUE, setting C<*endptr> to the byte following the final digit of the value. But if there is no constraint at what's looked at, all of C<pv> must be valid in order for TRUE to be returned. C<*endptr> is unchanged from its value on input if FALSE is returned; The only characters this accepts are the decimal digits '0'..'9'. As opposed to L<atoi(3)> or L<strtol(3)>, C<grok_atoUV> does NOT allow optional leading whitespace, nor negative inputs. If such features are required, the calling code needs to explicitly implement those. Note that this function returns FALSE for inputs that would overflow a UV, or have leading zeros. Thus a single C<0> is accepted, but not C<00> nor C<01>, C<002>, I<etc>. Background: C<atoi> has severe problems with illegal inputs, it cannot be used for incremental parsing, and therefore should be avoided C<atoi> and C<strtol> are also affected by locale settings, which can also be seen as a bug (global state controlled by user environment). bool grok_atoUV(const char* pv, UV* valptr, const char** endptr) =for hackers Found in file numeric.c =item isinfnansv X<isinfnansv> Checks whether the argument would be either an infinity or C<NaN> when used as a number, but is careful not to trigger non-numeric or uninitialized warnings. it assumes the caller has done C<SvGETMAGIC(sv)> already. bool isinfnansv(SV *sv) =for hackers Found in file numeric.c =back =head1 Obsolete backwards compatibility functions =over 8 =item utf8n_to_uvuni X<utf8n_to_uvuni> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. Instead use L<perlapi/utf8_to_uvchr_buf>, or rarely, L<perlapi/utf8n_to_uvchr>. This function was useful for code that wanted to handle both EBCDIC and ASCII platforms with Unicode properties, but starting in Perl v5.20, the distinctions between the platforms have mostly been made invisible to most code, so this function is quite unlikely to be what you want. If you do need this precise functionality, use instead C<L<NATIVE_TO_UNI(utf8_to_uvchr_buf(...))|perlapi/utf8_to_uvchr_buf>> or C<L<NATIVE_TO_UNI(utf8n_to_uvchr(...))|perlapi/utf8n_to_uvchr>>. UV utf8n_to_uvuni(const U8 *s, STRLEN curlen, STRLEN *retlen, U32 flags) =for hackers Found in file mathoms.c =item utf8_to_uvuni X<utf8_to_uvuni> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. Returns the Unicode code point of the first character in the string C<s> which is assumed to be in UTF-8 encoding; C<retlen> will be set to the length, in bytes, of that character. Some, but not all, UTF-8 malformations are detected, and in fact, some malformed input could cause reading beyond the end of the input buffer, which is one reason why this function is deprecated. The other is that only in extremely limited circumstances should the Unicode versus native code point be of any interest to you. See L</utf8_to_uvuni_buf> for alternatives. If C<s> points to one of the detected malformations, and UTF8 warnings are enabled, zero is returned and C<*retlen> is set (if C<retlen> doesn't point to NULL) to -1. If those warnings are off, the computed value if well-defined (or the Unicode REPLACEMENT CHARACTER, if not) is silently returned, and C<*retlen> is set (if C<retlen> isn't NULL) so that (S<C<s> + C<*retlen>>) is the next possible position in C<s> that could begin a non-malformed character. See L<perlapi/utf8n_to_uvchr> for details on when the REPLACEMENT CHARACTER is returned. UV utf8_to_uvuni(const U8 *s, STRLEN *retlen) =for hackers Found in file mathoms.c =item uvuni_to_utf8_flags X<uvuni_to_utf8_flags> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. Instead you almost certainly want to use L<perlapi/uvchr_to_utf8> or L<perlapi/uvchr_to_utf8_flags>. This function is a deprecated synonym for L</uvoffuni_to_utf8_flags>, which itself, while not deprecated, should be used only in isolated circumstances. These functions were useful for code that wanted to handle both EBCDIC and ASCII platforms with Unicode properties, but starting in Perl v5.20, the distinctions between the platforms have mostly been made invisible to most code, so this function is quite unlikely to be what you want. U8* uvuni_to_utf8_flags(U8 *d, UV uv, UV flags) =for hackers Found in file mathoms.c =back =head1 Optree Manipulation Functions =over 8 =item finalize_optree X<finalize_optree> This function finalizes the optree. Should be called directly after the complete optree is built. It does some additional checking which can't be done in the normal C<ck_>xxx functions and makes the tree thread-safe. void finalize_optree(OP* o) =for hackers Found in file op.c =item newATTRSUB_x X<newATTRSUB_x> Construct a Perl subroutine, also performing some surrounding jobs. This function is expected to be called in a Perl compilation context, and some aspects of the subroutine are taken from global variables associated with compilation. In particular, C<PL_compcv> represents the subroutine that is currently being compiled. It must be non-null when this function is called, and some aspects of the subroutine being constructed are taken from it. The constructed subroutine may actually be a reuse of the C<PL_compcv> object, but will not necessarily be so. If C<block> is null then the subroutine will have no body, and for the time being it will be an error to call it. This represents a forward subroutine declaration such as S<C<sub foo ($$);>>. If C<block> is non-null then it provides the Perl code of the subroutine body, which will be executed when the subroutine is called. This body includes any argument unwrapping code resulting from a subroutine signature or similar. The pad use of the code must correspond to the pad attached to C<PL_compcv>. The code is not expected to include a C<leavesub> or C<leavesublv> op; this function will add such an op. C<block> is consumed by this function and will become part of the constructed subroutine. C<proto> specifies the subroutine's prototype, unless one is supplied as an attribute (see below). If C<proto> is null, then the subroutine will not have a prototype. If C<proto> is non-null, it must point to a C<const> op whose value is a string, and the subroutine will have that string as its prototype. If a prototype is supplied as an attribute, the attribute takes precedence over C<proto>, but in that case C<proto> should preferably be null. In any case, C<proto> is consumed by this function. C<attrs> supplies attributes to be applied the subroutine. A handful of attributes take effect by built-in means, being applied to C<PL_compcv> immediately when seen. Other attributes are collected up and attached to the subroutine by this route. C<attrs> may be null to supply no attributes, or point to a C<const> op for a single attribute, or point to a C<list> op whose children apart from the C<pushmark> are C<const> ops for one or more attributes. Each C<const> op must be a string, giving the attribute name optionally followed by parenthesised arguments, in the manner in which attributes appear in Perl source. The attributes will be applied to the sub by this function. C<attrs> is consumed by this function. If C<o_is_gv> is false and C<o> is null, then the subroutine will be anonymous. If C<o_is_gv> is false and C<o> is non-null, then C<o> must point to a C<const> op, which will be consumed by this function, and its string value supplies a name for the subroutine. The name may be qualified or unqualified, and if it is unqualified then a default stash will be selected in some manner. If C<o_is_gv> is true, then C<o> doesn't point to an C<OP> at all, but is instead a cast pointer to a C<GV> by which the subroutine will be named. If there is already a subroutine of the specified name, then the new sub will either replace the existing one in the glob or be merged with the existing one. A warning may be generated about redefinition. If the subroutine has one of a few special names, such as C<BEGIN> or C<END>, then it will be claimed by the appropriate queue for automatic running of phase-related subroutines. In this case the relevant glob will be left not containing any subroutine, even if it did contain one before. In the case of C<BEGIN>, the subroutine will be executed and the reference to it disposed of before this function returns. The function returns a pointer to the constructed subroutine. If the sub is anonymous then ownership of one counted reference to the subroutine is transferred to the caller. If the sub is named then the caller does not get ownership of a reference. In most such cases, where the sub has a non-phase name, the sub will be alive at the point it is returned by virtue of being contained in the glob that names it. A phase-named subroutine will usually be alive by virtue of the reference owned by the phase's automatic run queue. But a C<BEGIN> subroutine, having already been executed, will quite likely have been destroyed already by the time this function returns, making it erroneous for the caller to make any use of the returned pointer. It is the caller's responsibility to ensure that it knows which of these situations applies. CV* newATTRSUB_x(I32 floor, OP *o, OP *proto, OP *attrs, OP *block, bool o_is_gv) =for hackers Found in file op.c =item newXS_len_flags X<newXS_len_flags> Construct an XS subroutine, also performing some surrounding jobs. The subroutine will have the entry point C<subaddr>. It will have the prototype specified by the nul-terminated string C<proto>, or no prototype if C<proto> is null. The prototype string is copied; the caller can mutate the supplied string afterwards. If C<filename> is non-null, it must be a nul-terminated filename, and the subroutine will have its C<CvFILE> set accordingly. By default C<CvFILE> is set to point directly to the supplied string, which must be static. If C<flags> has the C<XS_DYNAMIC_FILENAME> bit set, then a copy of the string will be taken instead. Other aspects of the subroutine will be left in their default state. If anything else needs to be done to the subroutine for it to function correctly, it is the caller's responsibility to do that after this function has constructed it. However, beware of the subroutine potentially being destroyed before this function returns, as described below. If C<name> is null then the subroutine will be anonymous, with its C<CvGV> referring to an C<__ANON__> glob. If C<name> is non-null then the subroutine will be named accordingly, referenced by the appropriate glob. C<name> is a string of length C<len> bytes giving a sigilless symbol name, in UTF-8 if C<flags> has the C<SVf_UTF8> bit set and in Latin-1 otherwise. The name may be either qualified or unqualified, with the stash defaulting in the same manner as for C<gv_fetchpvn_flags>. C<flags> may contain flag bits understood by C<gv_fetchpvn_flags> with the same meaning as they have there, such as C<GV_ADDWARN>. The symbol is always added to the stash if necessary, with C<GV_ADDMULTI> semantics. If there is already a subroutine of the specified name, then the new sub will replace the existing one in the glob. A warning may be generated about the redefinition. If the old subroutine was C<CvCONST> then the decision about whether to warn is influenced by an expectation about whether the new subroutine will become a constant of similar value. That expectation is determined by C<const_svp>. (Note that the call to this function doesn't make the new subroutine C<CvCONST> in any case; that is left to the caller.) If C<const_svp> is null then it indicates that the new subroutine will not become a constant. If C<const_svp> is non-null then it indicates that the new subroutine will become a constant, and it points to an C<SV*> that provides the constant value that the subroutine will have. If the subroutine has one of a few special names, such as C<BEGIN> or C<END>, then it will be claimed by the appropriate queue for automatic running of phase-related subroutines. In this case the relevant glob will be left not containing any subroutine, even if it did contain one before. In the case of C<BEGIN>, the subroutine will be executed and the reference to it disposed of before this function returns, and also before its prototype is set. If a C<BEGIN> subroutine would not be sufficiently constructed by this function to be ready for execution then the caller must prevent this happening by giving the subroutine a different name. The function returns a pointer to the constructed subroutine. If the sub is anonymous then ownership of one counted reference to the subroutine is transferred to the caller. If the sub is named then the caller does not get ownership of a reference. In most such cases, where the sub has a non-phase name, the sub will be alive at the point it is returned by virtue of being contained in the glob that names it. A phase-named subroutine will usually be alive by virtue of the reference owned by the phase's automatic run queue. But a C<BEGIN> subroutine, having already been executed, will quite likely have been destroyed already by the time this function returns, making it erroneous for the caller to make any use of the returned pointer. It is the caller's responsibility to ensure that it knows which of these situations applies. CV * newXS_len_flags(const char *name, STRLEN len, XSUBADDR_t subaddr, const char *const filename, const char *const proto, SV **const_svp, U32 flags) =for hackers Found in file op.c =item optimize_optree X<optimize_optree> This function applies some optimisations to the optree in top-down order. It is called before the peephole optimizer, which processes ops in execution order. Note that finalize_optree() also does a top-down scan, but is called *after* the peephole optimizer. void optimize_optree(OP* o) =for hackers Found in file op.c =item traverse_op_tree X<traverse_op_tree> Return the next op in a depth-first traversal of the op tree, returning NULL when the traversal is complete. The initial call must supply the root of the tree as both top and o. For now it's static, but it may be exposed to the API in the future. OP* traverse_op_tree(OP* top, OP* o) =for hackers Found in file op.c =back =head1 Pad Data Structures =over 8 =item CX_CURPAD_SAVE X<CX_CURPAD_SAVE> Save the current pad in the given context block structure. void CX_CURPAD_SAVE(struct context) =for hackers Found in file pad.h =item CX_CURPAD_SV X<CX_CURPAD_SV> Access the SV at offset C<po> in the saved current pad in the given context block structure (can be used as an lvalue). SV * CX_CURPAD_SV(struct context, PADOFFSET po) =for hackers Found in file pad.h =item PAD_BASE_SV X<PAD_BASE_SV> Get the value from slot C<po> in the base (DEPTH=1) pad of a padlist SV * PAD_BASE_SV(PADLIST padlist, PADOFFSET po) =for hackers Found in file pad.h =item PAD_CLONE_VARS X<PAD_CLONE_VARS> Clone the state variables associated with running and compiling pads. void PAD_CLONE_VARS(PerlInterpreter *proto_perl, CLONE_PARAMS* param) =for hackers Found in file pad.h =item PAD_COMPNAME_FLAGS X<PAD_COMPNAME_FLAGS> Return the flags for the current compiling pad name at offset C<po>. Assumes a valid slot entry. U32 PAD_COMPNAME_FLAGS(PADOFFSET po) =for hackers Found in file pad.h =item PAD_COMPNAME_GEN X<PAD_COMPNAME_GEN> The generation number of the name at offset C<po> in the current compiling pad (lvalue). STRLEN PAD_COMPNAME_GEN(PADOFFSET po) =for hackers Found in file pad.h =item PAD_COMPNAME_GEN_set X<PAD_COMPNAME_GEN_set> Sets the generation number of the name at offset C<po> in the current ling pad (lvalue) to C<gen>. STRLEN PAD_COMPNAME_GEN_set(PADOFFSET po, int gen) =for hackers Found in file pad.h =item PAD_COMPNAME_OURSTASH X<PAD_COMPNAME_OURSTASH> Return the stash associated with an C<our> variable. Assumes the slot entry is a valid C<our> lexical. HV * PAD_COMPNAME_OURSTASH(PADOFFSET po) =for hackers Found in file pad.h =item PAD_COMPNAME_PV X<PAD_COMPNAME_PV> Return the name of the current compiling pad name at offset C<po>. Assumes a valid slot entry. char * PAD_COMPNAME_PV(PADOFFSET po) =for hackers Found in file pad.h =item PAD_COMPNAME_TYPE X<PAD_COMPNAME_TYPE> Return the type (stash) of the current compiling pad name at offset C<po>. Must be a valid name. Returns null if not typed. HV * PAD_COMPNAME_TYPE(PADOFFSET po) =for hackers Found in file pad.h =item PadnameIsOUR X<PadnameIsOUR> Whether this is an "our" variable. bool PadnameIsOUR(PADNAME * pn) =for hackers Found in file pad.h =item PadnameIsSTATE X<PadnameIsSTATE> Whether this is a "state" variable. bool PadnameIsSTATE(PADNAME * pn) =for hackers Found in file pad.h =item PadnameOURSTASH X<PadnameOURSTASH> The stash in which this "our" variable was declared. HV * PadnameOURSTASH() =for hackers Found in file pad.h =item PadnameOUTER X<PadnameOUTER> Whether this entry belongs to an outer pad. Entries for which this is true are often referred to as 'fake'. bool PadnameOUTER(PADNAME * pn) =for hackers Found in file pad.h =item PadnameTYPE X<PadnameTYPE> The stash associated with a typed lexical. This returns the C<%Foo::> hash for C<my Foo $bar>. HV * PadnameTYPE(PADNAME * pn) =for hackers Found in file pad.h =item PAD_RESTORE_LOCAL X<PAD_RESTORE_LOCAL> Restore the old pad saved into the local variable C<opad> by C<PAD_SAVE_LOCAL()> void PAD_RESTORE_LOCAL(PAD *opad) =for hackers Found in file pad.h =item PAD_SAVE_LOCAL X<PAD_SAVE_LOCAL> Save the current pad to the local variable C<opad>, then make the current pad equal to C<npad> void PAD_SAVE_LOCAL(PAD *opad, PAD *npad) =for hackers Found in file pad.h =item PAD_SAVE_SETNULLPAD X<PAD_SAVE_SETNULLPAD> Save the current pad then set it to null. void PAD_SAVE_SETNULLPAD() =for hackers Found in file pad.h =item PAD_SETSV X<PAD_SETSV> Set the slot at offset C<po> in the current pad to C<sv> SV * PAD_SETSV(PADOFFSET po, SV* sv) =for hackers Found in file pad.h =item PAD_SET_CUR X<PAD_SET_CUR> Set the current pad to be pad C<n> in the padlist, saving the previous current pad. NB currently this macro expands to a string too long for some compilers, so it's best to replace it with SAVECOMPPAD(); PAD_SET_CUR_NOSAVE(padlist,n); void PAD_SET_CUR(PADLIST padlist, I32 n) =for hackers Found in file pad.h =item PAD_SET_CUR_NOSAVE X<PAD_SET_CUR_NOSAVE> like PAD_SET_CUR, but without the save void PAD_SET_CUR_NOSAVE(PADLIST padlist, I32 n) =for hackers Found in file pad.h =item PAD_SV X<PAD_SV> Get the value at offset C<po> in the current pad SV * PAD_SV(PADOFFSET po) =for hackers Found in file pad.h =item PAD_SVl X<PAD_SVl> Lightweight and lvalue version of C<PAD_SV>. Get or set the value at offset C<po> in the current pad. Unlike C<PAD_SV>, does not print diagnostics with -DX. For internal use only. SV * PAD_SVl(PADOFFSET po) =for hackers Found in file pad.h =item SAVECLEARSV X<SAVECLEARSV> Clear the pointed to pad value on scope exit. (i.e. the runtime action of C<my>) void SAVECLEARSV(SV **svp) =for hackers Found in file pad.h =item SAVECOMPPAD X<SAVECOMPPAD> save C<PL_comppad> and C<PL_curpad> void SAVECOMPPAD() =for hackers Found in file pad.h =item SAVEPADSV X<SAVEPADSV> Save a pad slot (used to restore after an iteration) XXX DAPM it would make more sense to make the arg a PADOFFSET void SAVEPADSV(PADOFFSET po) =for hackers Found in file pad.h =back =head1 Per-Interpreter Variables =over 8 =item PL_DBsingle X<PL_DBsingle> When Perl is run in debugging mode, with the B<-d> switch, this SV is a boolean which indicates whether subs are being single-stepped. Single-stepping is automatically turned on after every step. This is the C variable which corresponds to Perl's $DB::single variable. See C<L</PL_DBsub>>. SV * PL_DBsingle =for hackers Found in file intrpvar.h =item PL_DBsub X<PL_DBsub> When Perl is run in debugging mode, with the B<-d> switch, this GV contains the SV which holds the name of the sub being debugged. This is the C variable which corresponds to Perl's $DB::sub variable. See C<L</PL_DBsingle>>. GV * PL_DBsub =for hackers Found in file intrpvar.h =item PL_DBtrace X<PL_DBtrace> Trace variable used when Perl is run in debugging mode, with the B<-d> switch. This is the C variable which corresponds to Perl's $DB::trace variable. See C<L</PL_DBsingle>>. SV * PL_DBtrace =for hackers Found in file intrpvar.h =item PL_dowarn X<PL_dowarn> The C variable that roughly corresponds to Perl's C<$^W> warning variable. However, C<$^W> is treated as a boolean, whereas C<PL_dowarn> is a collection of flag bits. U8 PL_dowarn =for hackers Found in file intrpvar.h =item PL_last_in_gv X<PL_last_in_gv> The GV which was last used for a filehandle input operation. (C<< <FH> >>) GV* PL_last_in_gv =for hackers Found in file intrpvar.h =item PL_ofsgv X<PL_ofsgv> The glob containing the output field separator - C<*,> in Perl space. GV* PL_ofsgv =for hackers Found in file intrpvar.h =item PL_rs X<PL_rs> The input record separator - C<$/> in Perl space. SV* PL_rs =for hackers Found in file intrpvar.h =back =head1 Stack Manipulation Macros =over 8 =item djSP X<djSP> Declare Just C<SP>. This is actually identical to C<dSP>, and declares a local copy of perl's stack pointer, available via the C<SP> macro. See C<L<perlapi/SP>>. (Available for backward source code compatibility with the old (Perl 5.005) thread model.) djSP(); =for hackers Found in file pp.h =item LVRET X<LVRET> True if this op will be the return value of an lvalue subroutine =for hackers Found in file pp.h =back =head1 SV Flags =over 8 =item SVt_INVLIST X<SVt_INVLIST> Type flag for scalars. See L<perlapi/svtype>. =for hackers Found in file sv.h =back =head1 SV Manipulation Functions An SV (or AV, HV, etc.) is allocated in two parts: the head (struct sv, av, hv...) contains type and reference count information, and for many types, a pointer to the body (struct xrv, xpv, xpviv...), which contains fields specific to each type. Some types store all they need in the head, so don't have a body. In all but the most memory-paranoid configurations (ex: PURIFY), heads and bodies are allocated out of arenas, which by default are approximately 4K chunks of memory parcelled up into N heads or bodies. Sv-bodies are allocated by their sv-type, guaranteeing size consistency needed to allocate safely from arrays. For SV-heads, the first slot in each arena is reserved, and holds a link to the next arena, some flags, and a note of the number of slots. Snaked through each arena chain is a linked list of free items; when this becomes empty, an extra arena is allocated and divided up into N items which are threaded into the free list. SV-bodies are similar, but they use arena-sets by default, which separate the link and info from the arena itself, and reclaim the 1st slot in the arena. SV-bodies are further described later. The following global variables are associated with arenas: PL_sv_arenaroot pointer to list of SV arenas PL_sv_root pointer to list of free SV structures PL_body_arenas head of linked-list of body arenas PL_body_roots[] array of pointers to list of free bodies of svtype arrays are indexed by the svtype needed A few special SV heads are not allocated from an arena, but are instead directly created in the interpreter structure, eg PL_sv_undef. The size of arenas can be changed from the default by setting PERL_ARENA_SIZE appropriately at compile time. The SV arena serves the secondary purpose of allowing still-live SVs to be located and destroyed during final cleanup. At the lowest level, the macros new_SV() and del_SV() grab and free an SV head. (If debugging with -DD, del_SV() calls the function S_del_sv() to return the SV to the free list with error checking.) new_SV() calls more_sv() / sv_add_arena() to add an extra arena if the free list is empty. SVs in the free list have their SvTYPE field set to all ones. At the time of very final cleanup, sv_free_arenas() is called from perl_destruct() to physically free all the arenas allocated since the start of the interpreter. The function visit() scans the SV arenas list, and calls a specified function for each SV it finds which is still live - ie which has an SvTYPE other than all 1's, and a non-zero SvREFCNT. visit() is used by the following functions (specified as [function that calls visit()] / [function called by visit() for each SV]): sv_report_used() / do_report_used() dump all remaining SVs (debugging aid) sv_clean_objs() / do_clean_objs(),do_clean_named_objs(), do_clean_named_io_objs(),do_curse() Attempt to free all objects pointed to by RVs, try to do the same for all objects indir- ectly referenced by typeglobs too, and then do a final sweep, cursing any objects that remain. Called once from perl_destruct(), prior to calling sv_clean_all() below. sv_clean_all() / do_clean_all() SvREFCNT_dec(sv) each remaining SV, possibly triggering an sv_free(). It also sets the SVf_BREAK flag on the SV to indicate that the refcnt has been artificially lowered, and thus stopping sv_free() from giving spurious warnings about SVs which unexpectedly have a refcnt of zero. called repeatedly from perl_destruct() until there are no SVs left. =over 8 =item sv_2num X<sv_2num> NOTE: this function is experimental and may change or be removed without notice. Return an SV with the numeric value of the source SV, doing any necessary reference or overload conversion. The caller is expected to have handled get-magic already. SV* sv_2num(SV *const sv) =for hackers Found in file sv.c =item sv_add_arena X<sv_add_arena> Given a chunk of memory, link it to the head of the list of arenas, and split it into a list of free SVs. void sv_add_arena(char *const ptr, const U32 size, const U32 flags) =for hackers Found in file sv.c =item sv_clean_all X<sv_clean_all> Decrement the refcnt of each remaining SV, possibly triggering a cleanup. This function may have to be called multiple times to free SVs which are in complex self-referential hierarchies. I32 sv_clean_all() =for hackers Found in file sv.c =item sv_clean_objs X<sv_clean_objs> Attempt to destroy all objects not yet freed. void sv_clean_objs() =for hackers Found in file sv.c =item sv_free_arenas X<sv_free_arenas> Deallocate the memory used by all arenas. Note that all the individual SV heads and bodies within the arenas must already have been freed. void sv_free_arenas() =for hackers Found in file sv.c =item SvTHINKFIRST X<SvTHINKFIRST> A quick flag check to see whether an C<sv> should be passed to C<sv_force_normal> to be "downgraded" before C<SvIVX> or C<SvPVX> can be modified directly. For example, if your scalar is a reference and you want to modify the C<SvIVX> slot, you can't just do C<SvROK_off>, as that will leak the referent. This is used internally by various sv-modifying functions, such as C<sv_setsv>, C<sv_setiv> and C<sv_pvn_force>. One case that this does not handle is a gv without SvFAKE set. After if (SvTHINKFIRST(gv)) sv_force_normal(gv); it will still be a gv. C<SvTHINKFIRST> sometimes produces false positives. In those cases C<sv_force_normal> does nothing. U32 SvTHINKFIRST(SV *sv) =for hackers Found in file sv.h =back =head1 Unicode Support These are various utility functions for manipulating UTF8-encoded strings. For the uninitiated, this is a method of representing arbitrary Unicode characters as a variable number of bytes, in such a way that characters in the ASCII range are unmodified, and a zero byte never appears within non-zero characters. =over 8 =item find_uninit_var X<find_uninit_var> NOTE: this function is experimental and may change or be removed without notice. Find the name of the undefined variable (if any) that caused the operator to issue a "Use of uninitialized value" warning. If match is true, only return a name if its value matches C<uninit_sv>. So roughly speaking, if a unary operator (such as C<OP_COS>) generates a warning, then following the direct child of the op may yield an C<OP_PADSV> or C<OP_GV> that gives the name of the undefined variable. On the other hand, with C<OP_ADD> there are two branches to follow, so we only print the variable name if we get an exact match. C<desc_p> points to a string pointer holding the description of the op. This may be updated if needed. The name is returned as a mortal SV. Assumes that C<PL_op> is the OP that originally triggered the error, and that C<PL_comppad>/C<PL_curpad> points to the currently executing pad. SV* find_uninit_var(const OP *const obase, const SV *const uninit_sv, bool match, const char **desc_p) =for hackers Found in file sv.c =item isSCRIPT_RUN X<isSCRIPT_RUN> Returns a bool as to whether or not the sequence of bytes from C<s> up to but not including C<send> form a "script run". C<utf8_target> is TRUE iff the sequence starting at C<s> is to be treated as UTF-8. To be precise, except for two degenerate cases given below, this function returns TRUE iff all code points in it come from any combination of three "scripts" given by the Unicode "Script Extensions" property: Common, Inherited, and possibly one other. Additionally all decimal digits must come from the same consecutive sequence of 10. For example, if all the characters in the sequence are Greek, or Common, or Inherited, this function will return TRUE, provided any decimal digits in it are from the same block of digits in Common. (These are the ASCII digits "0".."9" and additionally a block for full width forms of these, and several others used in mathematical notation.) For scripts (unlike Greek) that have their own digits defined this will accept either digits from that set or from one of the Common digit sets, but not a combination of the two. Some scripts, such as Arabic, have more than one set of digits. All digits must come from the same set for this function to return TRUE. C<*ret_script>, if C<ret_script> is not NULL, will on return of TRUE contain the script found, using the C<SCX_enum> typedef. Its value will be C<SCX_INVALID> if the function returns FALSE. If the sequence is empty, TRUE is returned, but C<*ret_script> (if asked for) will be C<SCX_INVALID>. If the sequence contains a single code point which is unassigned to a character in the version of Unicode being used, the function will return TRUE, and the script will be C<SCX_Unknown>. Any other combination of unassigned code points in the input sequence will result in the function treating the input as not being a script run. The returned script will be C<SCX_Inherited> iff all the code points in it are from the Inherited script. Otherwise, the returned script will be C<SCX_Common> iff all the code points in it are from the Inherited or Common scripts. bool isSCRIPT_RUN(const U8 *s, const U8 *send, const bool utf8_target) =for hackers Found in file regexec.c =item is_utf8_non_invariant_string X<is_utf8_non_invariant_string> Returns TRUE if L<perlapi/is_utf8_invariant_string> returns FALSE for the first C<len> bytes of the string C<s>, but they are, nonetheless, legal Perl-extended UTF-8; otherwise returns FALSE. A TRUE return means that at least one code point represented by the sequence either is a wide character not representable as a single byte, or the representation differs depending on whether the sequence is encoded in UTF-8 or not. See also C<L<perlapi/is_utf8_invariant_string>>, C<L<perlapi/is_utf8_string>> bool is_utf8_non_invariant_string(const U8* const s, STRLEN len) =for hackers Found in file inline.h =item report_uninit X<report_uninit> Print appropriate "Use of uninitialized variable" warning. void report_uninit(const SV *uninit_sv) =for hackers Found in file sv.c =item utf8_to_uvuni_buf X<utf8_to_uvuni_buf> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. Only in very rare circumstances should code need to be dealing in Unicode (as opposed to native) code points. In those few cases, use C<L<NATIVE_TO_UNI(utf8_to_uvchr_buf(...))|perlapi/utf8_to_uvchr_buf>> instead. If you are not absolutely sure this is one of those cases, then assume it isn't and use plain C<utf8_to_uvchr_buf> instead. Returns the Unicode (not-native) code point of the first character in the string C<s> which is assumed to be in UTF-8 encoding; C<send> points to 1 beyond the end of C<s>. C<retlen> will be set to the length, in bytes, of that character. If C<s> does not point to a well-formed UTF-8 character and UTF8 warnings are enabled, zero is returned and C<*retlen> is set (if C<retlen> isn't NULL) to -1. If those warnings are off, the computed value if well-defined (or the Unicode REPLACEMENT CHARACTER, if not) is silently returned, and C<*retlen> is set (if C<retlen> isn't NULL) so that (S<C<s> + C<*retlen>>) is the next possible position in C<s> that could begin a non-malformed character. See L<perlapi/utf8n_to_uvchr> for details on when the REPLACEMENT CHARACTER is returned. UV utf8_to_uvuni_buf(const U8 *s, const U8 *send, STRLEN *retlen) =for hackers Found in file utf8.c =item uvoffuni_to_utf8_flags X<uvoffuni_to_utf8_flags> THIS FUNCTION SHOULD BE USED IN ONLY VERY SPECIALIZED CIRCUMSTANCES. Instead, B<Almost all code should use L<perlapi/uvchr_to_utf8> or L<perlapi/uvchr_to_utf8_flags>>. This function is like them, but the input is a strict Unicode (as opposed to native) code point. Only in very rare circumstances should code not be using the native code point. For details, see the description for L<perlapi/uvchr_to_utf8_flags>. U8* uvoffuni_to_utf8_flags(U8 *d, UV uv, const UV flags) =for hackers Found in file utf8.c =item valid_utf8_to_uvchr X<valid_utf8_to_uvchr> Like C<L<perlapi/utf8_to_uvchr_buf>>, but should only be called when it is known that the next character in the input UTF-8 string C<s> is well-formed (I<e.g.>, it passes C<L<perlapi/isUTF8_CHAR>>. Surrogates, non-character code points, and non-Unicode code points are allowed. UV valid_utf8_to_uvchr(const U8 *s, STRLEN *retlen) =for hackers Found in file inline.h =item variant_under_utf8_count X<variant_under_utf8_count> This function looks at the sequence of bytes between C<s> and C<e>, which are assumed to be encoded in ASCII/Latin1, and returns how many of them would change should the string be translated into UTF-8. Due to the nature of UTF-8, each of these would occupy two bytes instead of the single one in the input string. Thus, this function returns the precise number of bytes the string would expand by when translated to UTF-8. Unlike most of the other functions that have C<utf8> in their name, the input to this function is NOT a UTF-8-encoded string. The function name is slightly I<odd> to emphasize this. This function is internal to Perl because khw thinks that any XS code that would want this is probably operating too close to the internals. Presenting a valid use case could change that. See also C<L<perlapi/is_utf8_invariant_string>> and C<L<perlapi/is_utf8_invariant_string_loc>>, Size_t variant_under_utf8_count(const U8* const s, const U8* const e) =for hackers Found in file inline.h =back =head1 Undocumented functions The following functions are currently undocumented. If you use one of them, you may wish to consider creating and submitting documentation for it. =over =item ASCII_TO_NEED X<ASCII_TO_NEED> =item NATIVE_TO_NEED X<NATIVE_TO_NEED> =item POPMARK X<POPMARK> =item PadnameIN_SCOPE X<PadnameIN_SCOPE> =item PerlIO_restore_errno X<PerlIO_restore_errno> =item PerlIO_save_errno X<PerlIO_save_errno> =item PerlLIO_dup2_cloexec X<PerlLIO_dup2_cloexec> =item PerlLIO_dup_cloexec X<PerlLIO_dup_cloexec> =item PerlLIO_open3_cloexec X<PerlLIO_open3_cloexec> =item PerlLIO_open_cloexec X<PerlLIO_open_cloexec> =item PerlProc_pipe_cloexec X<PerlProc_pipe_cloexec> =item PerlSock_accept_cloexec X<PerlSock_accept_cloexec> =item PerlSock_socket_cloexec X<PerlSock_socket_cloexec> =item PerlSock_socketpair_cloexec X<PerlSock_socketpair_cloexec> =item ReANY X<ReANY> =item Slab_Alloc X<Slab_Alloc> =item Slab_Free X<Slab_Free> =item Slab_to_ro X<Slab_to_ro> =item Slab_to_rw X<Slab_to_rw> =item TOPMARK X<TOPMARK> =item _add_range_to_invlist X<_add_range_to_invlist> =item _byte_dump_string X<_byte_dump_string> =item _force_out_malformed_utf8_message X<_force_out_malformed_utf8_message> =item _inverse_folds X<_inverse_folds> =item _invlistEQ X<_invlistEQ> =item _invlist_array_init X<_invlist_array_init> =item _invlist_contains_cp X<_invlist_contains_cp> =item _invlist_dump X<_invlist_dump> =item _invlist_intersection X<_invlist_intersection> =item _invlist_intersection_maybe_complement_2nd X<_invlist_intersection_maybe_complement_2nd> =item _invlist_invert X<_invlist_invert> =item _invlist_len X<_invlist_len> =item _invlist_search X<_invlist_search> =item _invlist_subtract X<_invlist_subtract> =item _invlist_union X<_invlist_union> =item _invlist_union_maybe_complement_2nd X<_invlist_union_maybe_complement_2nd> =item _is_cur_LC_category_utf8 X<_is_cur_LC_category_utf8> =item _is_in_locale_category X<_is_in_locale_category> =item _is_uni_FOO X<_is_uni_FOO> =item _is_uni_perl_idcont X<_is_uni_perl_idcont> =item _is_uni_perl_idstart X<_is_uni_perl_idstart> =item _is_utf8_FOO X<_is_utf8_FOO> =item _is_utf8_perl_idcont X<_is_utf8_perl_idcont> =item _is_utf8_perl_idstart X<_is_utf8_perl_idstart> =item _mem_collxfrm X<_mem_collxfrm> =item _new_invlist X<_new_invlist> =item _new_invlist_C_array X<_new_invlist_C_array> =item _setup_canned_invlist X<_setup_canned_invlist> =item _to_fold_latin1 X<_to_fold_latin1> =item _to_uni_fold_flags X<_to_uni_fold_flags> =item _to_upper_title_latin1 X<_to_upper_title_latin1> =item _to_utf8_fold_flags X<_to_utf8_fold_flags> =item _to_utf8_lower_flags X<_to_utf8_lower_flags> =item _to_utf8_title_flags X<_to_utf8_title_flags> =item _to_utf8_upper_flags X<_to_utf8_upper_flags> =item _utf8n_to_uvchr_msgs_helper X<_utf8n_to_uvchr_msgs_helper> =item _warn_problematic_locale X<_warn_problematic_locale> =item abort_execution X<abort_execution> =item add_cp_to_invlist X<add_cp_to_invlist> =item alloc_LOGOP X<alloc_LOGOP> =item allocmy X<allocmy> =item amagic_cmp X<amagic_cmp> =item amagic_cmp_desc X<amagic_cmp_desc> =item amagic_cmp_locale X<amagic_cmp_locale> =item amagic_cmp_locale_desc X<amagic_cmp_locale_desc> =item amagic_i_ncmp X<amagic_i_ncmp> =item amagic_i_ncmp_desc X<amagic_i_ncmp_desc> =item amagic_is_enabled X<amagic_is_enabled> =item amagic_ncmp X<amagic_ncmp> =item amagic_ncmp_desc X<amagic_ncmp_desc> =item append_utf8_from_native_byte X<append_utf8_from_native_byte> =item apply X<apply> =item av_extend_guts X<av_extend_guts> =item av_nonelem X<av_nonelem> =item av_reify X<av_reify> =item bind_match X<bind_match> =item boot_core_PerlIO X<boot_core_PerlIO> =item boot_core_UNIVERSAL X<boot_core_UNIVERSAL> =item boot_core_mro X<boot_core_mro> =item cando X<cando> =item check_utf8_print X<check_utf8_print> =item ck_anoncode X<ck_anoncode> =item ck_backtick X<ck_backtick> =item ck_bitop X<ck_bitop> =item ck_cmp X<ck_cmp> =item ck_concat X<ck_concat> =item ck_defined X<ck_defined> =item ck_delete X<ck_delete> =item ck_each X<ck_each> =item ck_entersub_args_core X<ck_entersub_args_core> =item ck_eof X<ck_eof> =item ck_eval X<ck_eval> =item ck_exec X<ck_exec> =item ck_exists X<ck_exists> =item ck_ftst X<ck_ftst> =item ck_fun X<ck_fun> =item ck_glob X<ck_glob> =item ck_grep X<ck_grep> =item ck_index X<ck_index> =item ck_isa X<ck_isa> =item ck_join X<ck_join> =item ck_length X<ck_length> =item ck_lfun X<ck_lfun> =item ck_listiob X<ck_listiob> =item ck_match X<ck_match> =item ck_method X<ck_method> =item ck_null X<ck_null> =item ck_open X<ck_open> =item ck_prototype X<ck_prototype> =item ck_readline X<ck_readline> =item ck_refassign X<ck_refassign> =item ck_repeat X<ck_repeat> =item ck_require X<ck_require> =item ck_return X<ck_return> =item ck_rfun X<ck_rfun> =item ck_rvconst X<ck_rvconst> =item ck_sassign X<ck_sassign> =item ck_select X<ck_select> =item ck_shift X<ck_shift> =item ck_smartmatch X<ck_smartmatch> =item ck_sort X<ck_sort> =item ck_spair X<ck_spair> =item ck_split X<ck_split> =item ck_stringify X<ck_stringify> =item ck_subr X<ck_subr> =item ck_substr X<ck_substr> =item ck_svconst X<ck_svconst> =item ck_tell X<ck_tell> =item ck_trunc X<ck_trunc> =item closest_cop X<closest_cop> =item cmp_desc X<cmp_desc> =item cmp_locale_desc X<cmp_locale_desc> =item cmpchain_extend X<cmpchain_extend> =item cmpchain_finish X<cmpchain_finish> =item cmpchain_start X<cmpchain_start> =item cntrl_to_mnemonic X<cntrl_to_mnemonic> =item coresub_op X<coresub_op> =item create_eval_scope X<create_eval_scope> =item croak_caller X<croak_caller> =item croak_memory_wrap X<croak_memory_wrap> =item croak_no_mem X<croak_no_mem> =item croak_popstack X<croak_popstack> =item current_re_engine X<current_re_engine> =item custom_op_get_field X<custom_op_get_field> =item cv_ckproto_len_flags X<cv_ckproto_len_flags> =item cv_clone_into X<cv_clone_into> =item cv_const_sv_or_av X<cv_const_sv_or_av> =item cv_undef_flags X<cv_undef_flags> =item cvgv_from_hek X<cvgv_from_hek> =item cvgv_set X<cvgv_set> =item cvstash_set X<cvstash_set> =item deb_stack_all X<deb_stack_all> =item defelem_target X<defelem_target> =item delete_eval_scope X<delete_eval_scope> =item delimcpy_no_escape X<delimcpy_no_escape> =item die_unwind X<die_unwind> =item do_aexec X<do_aexec> =item do_aexec5 X<do_aexec5> =item do_eof X<do_eof> =item do_exec X<do_exec> =item do_exec3 X<do_exec3> =item do_ipcctl X<do_ipcctl> =item do_ipcget X<do_ipcget> =item do_msgrcv X<do_msgrcv> =item do_msgsnd X<do_msgsnd> =item do_ncmp X<do_ncmp> =item do_open6 X<do_open6> =item do_open_raw X<do_open_raw> =item do_print X<do_print> =item do_readline X<do_readline> =item do_seek X<do_seek> =item do_semop X<do_semop> =item do_shmio X<do_shmio> =item do_sysseek X<do_sysseek> =item do_tell X<do_tell> =item do_trans X<do_trans> =item do_uniprop_match X<do_uniprop_match> =item do_vecget X<do_vecget> =item do_vecset X<do_vecset> =item do_vop X<do_vop> =item does_utf8_overflow X<does_utf8_overflow> =item dofile X<dofile> =item drand48_init_r X<drand48_init_r> =item drand48_r X<drand48_r> =item dtrace_probe_call X<dtrace_probe_call> =item dtrace_probe_load X<dtrace_probe_load> =item dtrace_probe_op X<dtrace_probe_op> =item dtrace_probe_phase X<dtrace_probe_phase> =item dump_all_perl X<dump_all_perl> =item dump_packsubs_perl X<dump_packsubs_perl> =item dump_sub_perl X<dump_sub_perl> =item dump_sv_child X<dump_sv_child> =item dup_warnings X<dup_warnings> =item emulate_cop_io X<emulate_cop_io> =item find_first_differing_byte_pos X<find_first_differing_byte_pos> =item find_lexical_cv X<find_lexical_cv> =item find_runcv_where X<find_runcv_where> =item find_script X<find_script> =item foldEQ_latin1_s2_folded X<foldEQ_latin1_s2_folded> =item foldEQ_utf8_flags X<foldEQ_utf8_flags> =item form_alien_digit_msg X<form_alien_digit_msg> =item form_cp_too_large_msg X<form_cp_too_large_msg> =item free_tied_hv_pool X<free_tied_hv_pool> =item get_and_check_backslash_N_name X<get_and_check_backslash_N_name> =item get_db_sub X<get_db_sub> =item get_debug_opts X<get_debug_opts> =item get_deprecated_property_msg X<get_deprecated_property_msg> =item get_hash_seed X<get_hash_seed> =item get_invlist_iter_addr X<get_invlist_iter_addr> =item get_invlist_offset_addr X<get_invlist_offset_addr> =item get_invlist_previous_index_addr X<get_invlist_previous_index_addr> =item get_no_modify X<get_no_modify> =item get_opargs X<get_opargs> =item get_prop_definition X<get_prop_definition> =item get_prop_values X<get_prop_values> =item get_re_arg X<get_re_arg> =item get_re_gclass_nonbitmap_data X<get_re_gclass_nonbitmap_data> =item get_regclass_nonbitmap_data X<get_regclass_nonbitmap_data> =item get_regex_charset_name X<get_regex_charset_name> =item getenv_len X<getenv_len> =item grok_bin_oct_hex X<grok_bin_oct_hex> =item grok_bslash_c X<grok_bslash_c> =item grok_bslash_o X<grok_bslash_o> =item grok_bslash_x X<grok_bslash_x> =item gv_fetchmeth_internal X<gv_fetchmeth_internal> =item gv_override X<gv_override> =item gv_setref X<gv_setref> =item gv_stashpvn_internal X<gv_stashpvn_internal> =item gv_stashsvpvn_cached X<gv_stashsvpvn_cached> =item hfree_next_entry X<hfree_next_entry> =item hv_backreferences_p X<hv_backreferences_p> =item hv_kill_backrefs X<hv_kill_backrefs> =item hv_placeholders_p X<hv_placeholders_p> =item hv_pushkv X<hv_pushkv> =item hv_undef_flags X<hv_undef_flags> =item init_argv_symbols X<init_argv_symbols> =item init_constants X<init_constants> =item init_dbargs X<init_dbargs> =item init_debugger X<init_debugger> =item init_i18nl10n X<init_i18nl10n> =item init_i18nl14n X<init_i18nl14n> =item init_named_cv X<init_named_cv> =item init_uniprops X<init_uniprops> =item invert X<invert> =item invlist_array X<invlist_array> =item invlist_clear X<invlist_clear> =item invlist_clone X<invlist_clone> =item invlist_contents X<invlist_contents> =item invlist_extend X<invlist_extend> =item invlist_highest X<invlist_highest> =item invlist_is_iterating X<invlist_is_iterating> =item invlist_iterfinish X<invlist_iterfinish> =item invlist_iterinit X<invlist_iterinit> =item invlist_iternext X<invlist_iternext> =item invlist_lowest X<invlist_lowest> =item invlist_max X<invlist_max> =item invlist_previous_index X<invlist_previous_index> =item invlist_set_len X<invlist_set_len> =item invlist_set_previous_index X<invlist_set_previous_index> =item invlist_trim X<invlist_trim> =item invmap_dump X<invmap_dump> =item io_close X<io_close> =item isFF_OVERLONG X<isFF_OVERLONG> =item isFOO_lc X<isFOO_lc> =item is_grapheme X<is_grapheme> =item is_invlist X<is_invlist> =item is_utf8_char_helper X<is_utf8_char_helper> =item is_utf8_common X<is_utf8_common> =item is_utf8_overlong_given_start_byte_ok X<is_utf8_overlong_given_start_byte_ok> =item jmaybe X<jmaybe> =item keyword X<keyword> =item keyword_plugin_standard X<keyword_plugin_standard> =item list X<list> =item load_charnames X<load_charnames> =item localize X<localize> =item lossless_NV_to_IV X<lossless_NV_to_IV> =item magic_clear_all_env X<magic_clear_all_env> =item magic_cleararylen_p X<magic_cleararylen_p> =item magic_clearenv X<magic_clearenv> =item magic_clearisa X<magic_clearisa> =item magic_clearpack X<magic_clearpack> =item magic_clearsig X<magic_clearsig> =item magic_copycallchecker X<magic_copycallchecker> =item magic_existspack X<magic_existspack> =item magic_freearylen_p X<magic_freearylen_p> =item magic_freeovrld X<magic_freeovrld> =item magic_get X<magic_get> =item magic_getarylen X<magic_getarylen> =item magic_getdebugvar X<magic_getdebugvar> =item magic_getdefelem X<magic_getdefelem> =item magic_getnkeys X<magic_getnkeys> =item magic_getpack X<magic_getpack> =item magic_getpos X<magic_getpos> =item magic_getsig X<magic_getsig> =item magic_getsubstr X<magic_getsubstr> =item magic_gettaint X<magic_gettaint> =item magic_getuvar X<magic_getuvar> =item magic_getvec X<magic_getvec> =item magic_killbackrefs X<magic_killbackrefs> =item magic_nextpack X<magic_nextpack> =item magic_regdata_cnt X<magic_regdata_cnt> =item magic_regdatum_get X<magic_regdatum_get> =item magic_regdatum_set X<magic_regdatum_set> =item magic_scalarpack X<magic_scalarpack> =item magic_set X<magic_set> =item magic_set_all_env X<magic_set_all_env> =item magic_setarylen X<magic_setarylen> =item magic_setcollxfrm X<magic_setcollxfrm> =item magic_setdbline X<magic_setdbline> =item magic_setdebugvar X<magic_setdebugvar> =item magic_setdefelem X<magic_setdefelem> =item magic_setenv X<magic_setenv> =item magic_setisa X<magic_setisa> =item magic_setlvref X<magic_setlvref> =item magic_setmglob X<magic_setmglob> =item magic_setnkeys X<magic_setnkeys> =item magic_setnonelem X<magic_setnonelem> =item magic_setpack X<magic_setpack> =item magic_setpos X<magic_setpos> =item magic_setregexp X<magic_setregexp> =item magic_setsig X<magic_setsig> =item magic_setsubstr X<magic_setsubstr> =item magic_settaint X<magic_settaint> =item magic_setutf8 X<magic_setutf8> =item magic_setuvar X<magic_setuvar> =item magic_setvec X<magic_setvec> =item magic_sizepack X<magic_sizepack> =item magic_wipepack X<magic_wipepack> =item malloc_good_size X<malloc_good_size> =item malloced_size X<malloced_size> =item mem_collxfrm X<mem_collxfrm> =item mem_log_alloc X<mem_log_alloc> =item mem_log_free X<mem_log_free> =item mem_log_realloc X<mem_log_realloc> =item mg_find_mglob X<mg_find_mglob> =item mode_from_discipline X<mode_from_discipline> =item more_bodies X<more_bodies> =item mortal_getenv X<mortal_getenv> =item mro_meta_dup X<mro_meta_dup> =item mro_meta_init X<mro_meta_init> =item multiconcat_stringify X<multiconcat_stringify> =item multideref_stringify X<multideref_stringify> =item my_atof2 X<my_atof2> =item my_atof3 X<my_atof3> =item my_attrs X<my_attrs> =item my_clearenv X<my_clearenv> =item my_lstat_flags X<my_lstat_flags> =item my_memrchr X<my_memrchr> =item my_mkostemp X<my_mkostemp> =item my_mkostemp_cloexec X<my_mkostemp_cloexec> =item my_mkstemp X<my_mkstemp> =item my_mkstemp_cloexec X<my_mkstemp_cloexec> =item my_stat_flags X<my_stat_flags> =item my_strerror X<my_strerror> =item my_unexec X<my_unexec> =item newGP X<newGP> =item newMETHOP_internal X<newMETHOP_internal> =item newSTUB X<newSTUB> =item newSVavdefelem X<newSVavdefelem> =item newXS_deffile X<newXS_deffile> =item new_warnings_bitfield X<new_warnings_bitfield> =item nextargv X<nextargv> =item noperl_die X<noperl_die> =item notify_parser_that_changed_to_utf8 X<notify_parser_that_changed_to_utf8> =item oopsAV X<oopsAV> =item oopsHV X<oopsHV> =item op_clear X<op_clear> =item op_integerize X<op_integerize> =item op_lvalue_flags X<op_lvalue_flags> =item op_refcnt_dec X<op_refcnt_dec> =item op_refcnt_inc X<op_refcnt_inc> =item op_relocate_sv X<op_relocate_sv> =item op_std_init X<op_std_init> =item op_unscope X<op_unscope> =item opmethod_stash X<opmethod_stash> =item opslab_force_free X<opslab_force_free> =item opslab_free X<opslab_free> =item opslab_free_nopad X<opslab_free_nopad> =item package X<package> =item package_version X<package_version> =item pad_add_weakref X<pad_add_weakref> =item padlist_store X<padlist_store> =item padname_free X<padname_free> =item padnamelist_free X<padnamelist_free> =item parse_unicode_opts X<parse_unicode_opts> =item parser_free X<parser_free> =item parser_free_nexttoke_ops X<parser_free_nexttoke_ops> =item path_is_searchable X<path_is_searchable> =item peep X<peep> =item pmruntime X<pmruntime> =item populate_isa X<populate_isa> =item ptr_hash X<ptr_hash> =item qerror X<qerror> =item re_exec_indentf X<re_exec_indentf> =item re_indentf X<re_indentf> =item re_intuit_start X<re_intuit_start> =item re_intuit_string X<re_intuit_string> =item re_op_compile X<re_op_compile> =item re_printf X<re_printf> =item reg_named_buff X<reg_named_buff> =item reg_named_buff_iter X<reg_named_buff_iter> =item reg_numbered_buff_fetch X<reg_numbered_buff_fetch> =item reg_numbered_buff_length X<reg_numbered_buff_length> =item reg_numbered_buff_store X<reg_numbered_buff_store> =item reg_qr_package X<reg_qr_package> =item reg_skipcomment X<reg_skipcomment> =item reg_temp_copy X<reg_temp_copy> =item regcurly X<regcurly> =item regprop X<regprop> =item report_evil_fh X<report_evil_fh> =item report_redefined_cv X<report_redefined_cv> =item report_wrongway_fh X<report_wrongway_fh> =item rpeep X<rpeep> =item rsignal_restore X<rsignal_restore> =item rsignal_save X<rsignal_save> =item rxres_save X<rxres_save> =item same_dirent X<same_dirent> =item save_strlen X<save_strlen> =item save_to_buffer X<save_to_buffer> =item sawparens X<sawparens> =item scalar X<scalar> =item scalarvoid X<scalarvoid> =item scan_str X<scan_str> =item scan_word X<scan_word> =item set_caret_X X<set_caret_X> =item set_numeric_standard X<set_numeric_standard> =item set_numeric_underlying X<set_numeric_underlying> =item set_padlist X<set_padlist> =item setfd_cloexec X<setfd_cloexec> =item setfd_cloexec_for_nonsysfd X<setfd_cloexec_for_nonsysfd> =item setfd_cloexec_or_inhexec_by_sysfdness X<setfd_cloexec_or_inhexec_by_sysfdness> =item setfd_inhexec X<setfd_inhexec> =item setfd_inhexec_for_sysfd X<setfd_inhexec_for_sysfd> =item should_warn_nl X<should_warn_nl> =item should_we_output_Debug_r X<should_we_output_Debug_r> =item sighandler X<sighandler> =item sighandler1 X<sighandler1> =item sighandler3 X<sighandler3> =item skipspace_flags X<skipspace_flags> =item softref2xv X<softref2xv> =item sortsv_flags_impl X<sortsv_flags_impl> =item sub_crush_depth X<sub_crush_depth> =item sv_add_backref X<sv_add_backref> =item sv_buf_to_ro X<sv_buf_to_ro> =item sv_del_backref X<sv_del_backref> =item sv_free2 X<sv_free2> =item sv_i_ncmp X<sv_i_ncmp> =item sv_i_ncmp_desc X<sv_i_ncmp_desc> =item sv_kill_backrefs X<sv_kill_backrefs> =item sv_len_utf8_nomg X<sv_len_utf8_nomg> =item sv_magicext_mglob X<sv_magicext_mglob> =item sv_ncmp X<sv_ncmp> =item sv_ncmp_desc X<sv_ncmp_desc> =item sv_only_taint_gmagic X<sv_only_taint_gmagic> =item sv_or_pv_pos_u2b X<sv_or_pv_pos_u2b> =item sv_resetpvn X<sv_resetpvn> =item sv_sethek X<sv_sethek> =item sv_setsv_cow X<sv_setsv_cow> =item sv_unglob X<sv_unglob> =item tied_method X<tied_method> =item tmps_grow_p X<tmps_grow_p> =item to_uni_fold X<to_uni_fold> =item to_uni_lower X<to_uni_lower> =item to_uni_title X<to_uni_title> =item to_uni_upper X<to_uni_upper> =item translate_substr_offsets X<translate_substr_offsets> =item try_amagic_bin X<try_amagic_bin> =item try_amagic_un X<try_amagic_un> =item uiv_2buf X<uiv_2buf> =item unshare_hek X<unshare_hek> =item utf16_to_utf8 X<utf16_to_utf8> =item utf16_to_utf8_reversed X<utf16_to_utf8_reversed> =item utf8_to_uvchr_buf_helper X<utf8_to_uvchr_buf_helper> =item utilize X<utilize> =item uvoffuni_to_utf8_flags_msgs X<uvoffuni_to_utf8_flags_msgs> =item uvuni_to_utf8 X<uvuni_to_utf8> =item valid_utf8_to_uvuni X<valid_utf8_to_uvuni> =item variant_byte_number X<variant_byte_number> =item varname X<varname> =item vivify_defelem X<vivify_defelem> =item vivify_ref X<vivify_ref> =item wait4pid X<wait4pid> =item was_lvalue_sub X<was_lvalue_sub> =item watch X<watch> =item win32_croak_not_implemented X<win32_croak_not_implemented> =item write_to_stderr X<write_to_stderr> =item xs_boot_epilog X<xs_boot_epilog> =item xs_handshake X<xs_handshake> =item yyerror X<yyerror> =item yyerror_pv X<yyerror_pv> =item yyerror_pvn X<yyerror_pvn> =item yylex X<yylex> =item yyparse X<yyparse> =item yyquit X<yyquit> =item yyunlex X<yyunlex> =back =head1 AUTHORS The autodocumentation system was originally added to the Perl core by Benjamin Stuhl. Documentation is by whoever was kind enough to document their functions. =head1 SEE ALSO F<config.h> L<perlapi> L<perlapio> L<perlcall> L<perlclib> L<perlfilter> L<perlguts> L<perlmroapi> L<perlxs> L<perlxstut> L<warnings> =cut ex: set ro: perl5263delta.pod 0000644 00000015633 15125556335 0007566 0 ustar 00 =encoding utf8 =head1 NAME perl5263delta - what is new for perl v5.26.3 =head1 DESCRIPTION This document describes differences between the 5.26.2 release and the 5.26.3 release. If you are upgrading from an earlier release such as 5.26.1, first read L<perl5262delta>, which describes differences between 5.26.1 and 5.26.2. =head1 Security =head2 [CVE-2018-12015] Directory traversal in module Archive::Tar By default, L<Archive::Tar> doesn't allow extracting files outside the current working directory. However, this secure extraction mode could be bypassed by putting a symlink and a regular file with the same name into the tar file. L<[perl #133250]|https://rt.perl.org/Ticket/Display.html?id=133250> L<[cpan #125523]|https://rt.cpan.org/Ticket/Display.html?id=125523> =head2 [CVE-2018-18311] Integer overflow leading to buffer overflow and segmentation fault Integer arithmetic in C<Perl_my_setenv()> could wrap when the combined length of the environment variable name and value exceeded around 0x7fffffff. This could lead to writing beyond the end of an allocated buffer with attacker supplied data. L<[perl #133204]|https://rt.perl.org/Ticket/Display.html?id=133204> =head2 [CVE-2018-18312] Heap-buffer-overflow write in S_regatom (regcomp.c) A crafted regular expression could cause heap-buffer-overflow write during compilation, potentially allowing arbitrary code execution. L<[perl #133423]|https://rt.perl.org/Ticket/Display.html?id=133423> =head2 [CVE-2018-18313] Heap-buffer-overflow read in S_grok_bslash_N (regcomp.c) A crafted regular expression could cause heap-buffer-overflow read during compilation, potentially leading to sensitive information being leaked. L<[perl #133192]|https://rt.perl.org/Ticket/Display.html?id=133192> =head2 [CVE-2018-18314] Heap-buffer-overflow write in S_regatom (regcomp.c) A crafted regular expression could cause heap-buffer-overflow write during compilation, potentially allowing arbitrary code execution. L<[perl #131649]|https://rt.perl.org/Ticket/Display.html?id=131649> =head1 Incompatible Changes There are no changes intentionally incompatible with 5.26.2. If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Archive::Tar> has been upgraded from version 2.24 to 2.24_01. =item * L<Module::CoreList> has been upgraded from version 5.20180414_26 to 5.20181129_26. =back =head1 Diagnostics The following additions or changes have been made to diagnostic output, including warnings and fatal error messages. For the complete list of diagnostic messages, see L<perldiag>. =head2 New Diagnostics =head3 New Errors =over 4 =item * L<Unexpected ']' with no following ')' in (?[... in regex; marked by E<lt>-- HERE in mE<sol>%sE<sol>|perldiag/"Unexpected ']' with no following ')' in (?[... in regex; marked by E<lt>-- HERE in mE<sol>%sE<sol>"> (F) While parsing an extended character class a ']' character was encountered at a point in the definition where the only legal use of ']' is to close the character class definition as part of a '])', you may have forgotten the close paren, or otherwise confused the parser. =item * L<Expecting close paren for nested extended charclass in regex; marked by E<lt>-- HERE in mE<sol>%sE<sol>|perldiag/"Expecting close paren for nested extended charclass in regex; marked by E<lt>-- HERE in mE<sol>%sE<sol>"> (F) While parsing a nested extended character class like: (?[ ... (?flags:(?[ ... ])) ... ]) ^ we expected to see a close paren ')' (marked by ^) but did not. =item * L<Expecting close paren for wrapper for nested extended charclass in regex; marked by E<lt>-- HERE in mE<sol>%sE<sol>|perldiag/"Expecting close paren for wrapper for nested extended charclass in regex; marked by E<lt>-- HERE in mE<sol>%sE<sol>"> (F) While parsing a nested extended character class like: (?[ ... (?flags:(?[ ... ])) ... ]) ^ we expected to see a close paren ')' (marked by ^) but did not. =back =head2 Changes to Existing Diagnostics =over 4 =item * L<Syntax error in (?[...]) in regex; marked by E<lt>-- HERE in mE<sol>%sE<sol>|perldiag/"Syntax error in (?[...]) in regex; marked by E<lt>-- HERE in mE<sol>%sE<sol>"> This fatal error message has been slightly expanded (from "Syntax error in (?[...]) in regex mE<sol>%sE<sol>") for greater clarity. =back =head1 Acknowledgements Perl 5.26.3 represents approximately 8 months of development since Perl 5.26.2 and contains approximately 4,500 lines of changes across 51 files from 15 authors. Excluding auto-generated files, documentation and release tools, there were approximately 770 lines of changes to 10 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.26.3: Aaron Crane, Abigail, Chris 'BinGOs' Williams, Dagfinn Ilmari Mannsåker, David Mitchell, H.Merijn Brand, James E Keenan, John SJ Anderson, Karen Etheridge, Karl Williamson, Sawyer X, Steve Hay, Todd Rinaldo, Tony Cook, Yves Orton. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the perl bug database at L<https://rt.perl.org/> . There may also be information at L<http://www.perl.org/> , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications which make it inappropriate to send to a publicly archived mailing list, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 Give Thanks If you wish to thank the Perl 5 Porters for the work we had done in Perl 5, you can do so by running the C<perlthanks> program: perlthanks This will send an email to the Perl 5 Porters list with your show of thanks. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlos390.pod 0000644 00000040217 15125556335 0007026 0 ustar 00 This document is written in pod format hence there are punctuation characters in odd places. Do not worry, you have apparently got the ASCII->EBCDIC translation worked out correctly. You can read more about pod in pod/perlpod.pod or the short summary in the INSTALL file. =head1 NAME perlos390 - building and installing Perl for OS/390 and z/OS =head1 SYNOPSIS This document will help you Configure, build, test and install Perl on OS/390 (aka z/OS) Unix System Services. B<This document needs to be updated, but we don't know what it should say. Please submit comments to L<https://github.com/Perl/perl5/issues>.> =head1 DESCRIPTION This is a fully ported Perl for OS/390 Version 2 Release 3, 5, 6, 7, 8, and 9. It may work on other versions or releases, but those are the ones we have tested it on. You may need to carry out some system configuration tasks before running the Configure script for Perl. =head2 Tools The z/OS Unix Tools and Toys list may prove helpful and contains links to ports of much of the software helpful for building Perl. L<http://www.ibm.com/servers/eserver/zseries/zos/unix/bpxa1toy.html> =head2 Unpacking Perl distribution on OS/390 If using ftp remember to transfer the distribution in binary format. Gunzip/gzip for OS/390 is discussed at: http://www.ibm.com/servers/eserver/zseries/zos/unix/bpxa1ty1.html to extract an ASCII tar archive on OS/390, try this: pax -o to=IBM-1047,from=ISO8859-1 -r < latest.tar or zcat latest.tar.Z | pax -o to=IBM-1047,from=ISO8859-1 -r If you get lots of errors of the form tar: FSUM7171 ...: cannot set uid/gid: EDC5139I Operation not permitted you did not read the above and tried to use tar instead of pax, you'll first have to remove the (now corrupt) perl directory rm -rf perl-... and then use pax. =head2 Setup and utilities for Perl on OS/390 Be sure that your yacc installation is in place including any necessary parser template files. If you have not already done so then be sure to: cp /samples/yyparse.c /etc This may also be a good time to ensure that your /etc/protocol file and either your /etc/resolv.conf or /etc/hosts files are in place. The IBM document that described such USS system setup issues was SC28-1890-07 "OS/390 UNIX System Services Planning", in particular Chapter 6 on customizing the OE shell. GNU make for OS/390, which is recommended for the build of perl (as well as building CPAN modules and extensions), is available from the L</Tools>. Some people have reported encountering "Out of memory!" errors while trying to build Perl using GNU make binaries. If you encounter such trouble then try to download the source code kit and build GNU make from source to eliminate any such trouble. You might also find GNU make (as well as Perl and Apache) in the red-piece/book "Open Source Software for OS/390 UNIX", SG24-5944-00 from IBM. If instead of the recommended GNU make you would like to use the system supplied make program then be sure to install the default rules file properly via the shell command: cp /samples/startup.mk /etc and be sure to also set the environment variable _C89_CCMODE=1 (exporting _C89_CCMODE=1 is also a good idea for users of GNU make). You might also want to have GNU groff for OS/390 installed before running the "make install" step for Perl. There is a syntax error in the /usr/include/sys/socket.h header file that IBM supplies with USS V2R7, V2R8, and possibly V2R9. The problem with the header file is that near the definition of the SO_REUSEPORT constant there is a spurious extra '/' character outside of a comment like so: #define SO_REUSEPORT 0x0200 /* allow local address & port reuse */ / You could edit that header yourself to remove that last '/', or you might note that Language Environment (LE) APAR PQ39997 describes the problem and PTF's UQ46272 and UQ46271 are the (R8 at least) fixes and apply them. If left unattended that syntax error will turn up as an inability for Perl to build its "Socket" extension. For successful testing you may need to turn on the sticky bit for your world readable /tmp directory if you have not already done so (see man chmod). =head2 Configure Perl on OS/390 Once you have unpacked the distribution, run "sh Configure" (see INSTALL for a full discussion of the Configure options). There is a "hints" file for os390 that specifies the correct values for most things. Some things to watch out for include: =head3 Shell A message of the form: (I see you are using the Korn shell. Some ksh's blow up on Configure, mainly on older exotic systems. If yours does, try the Bourne shell instead.) is nothing to worry about at all. =head3 Samples Some of the parser default template files in /samples are needed in /etc. In particular be sure that you at least copy /samples/yyparse.c to /etc before running Perl's Configure. This step ensures successful extraction of EBCDIC versions of parser files such as perly.c and perly.h. This has to be done before running Configure the first time. If you failed to do so then the easiest way to re-Configure Perl is to delete your misconfigured build root and re-extract the source from the tar ball. Then you must ensure that /etc/yyparse.c is properly in place before attempting to re-run Configure. =head3 Dynamic loading Dynamic loading is required if you want to use XS modules from CPAN (like DBI (and DBD's), JSON::XS, and Text::CSV_XS) or update CORE modules from CPAN with newer versions (like Encode) without rebuilding all of the perl binary. This port will support dynamic loading, but it is not selected by default. If you would like to experiment with dynamic loading then be sure to specify -Dusedl in the arguments to the Configure script. See the comments in hints/os390.sh for more information on dynamic loading. If you build with dynamic loading then you will need to add the $archlibexp/CORE directory to your LIBPATH environment variable in order for perl to work. See the config.sh file for the value of $archlibexp. If in trying to use Perl you see an error message similar to: CEE3501S The module libperl.dll was not found. From entry point __dllstaticinit at compile unit offset +00000194 at then your LIBPATH does not have the location of libperl.x and either libperl.dll or libperl.so in it. Add that directory to your LIBPATH and proceed. In hints/os390.sh, selecting -Dusedl will default to *also* select -Duseshrplib. Having a shared plib not only requires LIBPATH to be set to the correct location of libperl.so but also makes it close to impossible to run more than one different perl that was built this way at the same time. All objects that are involved in -Dusedl builds should be compiled for this, probably by adding to all ccflags -qexportall -qxplink -qdll -Wc,XPLINK,dll,EXPORTALL -Wl,XPLINK,dll =head3 Optimizing Do not turn on the compiler optimization flag "-O". There is a bug in either the optimizer or perl that causes perl to not work correctly when the optimizer is on. =head3 Config files Some of the configuration files in /etc used by the networking APIs are either missing or have the wrong names. In particular, make sure that there's either an /etc/resolv.conf or an /etc/hosts, so that gethostbyname() works, and make sure that the file /etc/proto has been renamed to /etc/protocol (NOT /etc/protocols, as used by other Unix systems). You may have to look for things like HOSTNAME and DOMAINORIGIN in the "//'SYS1.TCPPARMS(TCPDATA)'" PDS member in order to properly set up your /etc networking files. =head2 Build, Test, Install Perl on OS/390 Simply put: sh Configure make make test if everything looks ok (see the next section for test/IVP diagnosis) then: make install this last step may or may not require UID=0 privileges depending on how you answered the questions that Configure asked and whether or not you have write access to the directories you specified. =head2 Build Anomalies with Perl on OS/390 "Out of memory!" messages during the build of Perl are most often fixed by re building the GNU make utility for OS/390 from a source code kit. Building debugging-enabled binaries (with -g or -g3) will increase the chance of getting these errors. Prevent -g if possible. Another memory limiting item to check is your MAXASSIZE parameter in your 'SYS1.PARMLIB(BPXPRMxx)' data set (note too that as of V2R8 address space limits can be set on a per user ID basis in the USS segment of a RACF profile). People have reported successful builds of Perl with MAXASSIZE parameters as small as 503316480 (and it may be possible to build Perl with a MAXASSIZE smaller than that). Within USS your /etc/profile or $HOME/.profile may limit your ulimit settings. Check that the following command returns reasonable values: ulimit -a To conserve memory you should have your compiler modules loaded into the Link Pack Area (LPA/ELPA) rather than in a link list or step lib. If the c89 compiler complains of syntax errors during the build of the Socket extension then be sure to fix the syntax error in the system header /usr/include/sys/socket.h. =head2 Testing Anomalies with Perl on OS/390 The "make test" step runs a Perl Verification Procedure, usually before installation. You might encounter STDERR messages even during a successful run of "make test". Here is a guide to some of the more commonly seen anomalies: =head3 Signals A message of the form: io/openpid...........CEE5210S The signal SIGHUP was received. CEE5210S The signal SIGHUP was received. CEE5210S The signal SIGHUP was received. ok indicates that the t/io/openpid.t test of Perl has passed but done so with extraneous messages on stderr from CEE. =head3 File::Temp A message of the form: lib/ftmp-security....File::Temp::_gettemp: Parent directory (/tmp/) is not safe (sticky bit not set when world writable?) at lib/ftmp-security.t line 100 File::Temp::_gettemp: Parent directory (/tmp/) is not safe (sticky bit not set when world writable?) at lib/ftmp-security.t line 100 ok indicates a problem with the permissions on your /tmp directory within the HFS. To correct that problem issue the command: chmod a+t /tmp from an account with write access to the directory entry for /tmp. =head3 Out of Memory! Recent perl test suite is quite memory hungry. In addition to the comments above on memory limitations it is also worth checking for _CEE_RUNOPTS in your environment. Perl now has (in miniperlmain.c) a C #pragma to set CEE run options, but the environment variable wins. The C code asks for: #pragma runopts(HEAP(2M,500K,ANYWHERE,KEEP,8K,4K) STACK(,,ANY,) ALL31(ON)) The important parts of that are the second argument (the increment) to HEAP, and allowing the stack to be "Above the (16M) line". If the heap increment is too small then when perl (for example loading unicode/Name.pl) tries to create a "big" (400K+) string it cannot fit in a single segment and you get "Out of Memory!" - even if there is still plenty of memory available. A related issue is use with perl's malloc. Perl's malloc uses C<sbrk()> to get memory, and C<sbrk()> is limited to the first allocation so in this case something like: HEAP(8M,500K,ANYWHERE,KEEP,8K,4K) is needed to get through the test suite. =head2 Installation Anomalies with Perl on OS/390 The installman script will try to run on OS/390. There will be fewer errors if you have a roff utility installed. You can obtain GNU groff from the Redbook SG24-5944-00 ftp site. =head2 Usage Hints for Perl on OS/390 When using perl on OS/390 please keep in mind that the EBCDIC and ASCII character sets are different. See perlebcdic.pod for more on such character set issues. Perl builtin functions that may behave differently under EBCDIC are also mentioned in the perlport.pod document. Open Edition (UNIX System Services) from V2R8 onward does support #!/path/to/perl script invocation. There is a PTF available from IBM for V2R7 that will allow shell/kernel support for #!. USS releases prior to V2R7 did not support the #! means of script invocation. If you are running V2R6 or earlier then see: head `whence perldoc` for an example of how to use the "eval exec" trick to ask the shell to have Perl run your scripts on those older releases of Unix System Services. If you are having trouble with square brackets then consider switching your rlogin or telnet client. Try to avoid older 3270 emulators and ISHELL for working with Perl on USS. =head2 Floating Point Anomalies with Perl on OS/390 There appears to be a bug in the floating point implementation on S/390 systems such that calling int() on the product of a number and a small magnitude number is not the same as calling int() on the quotient of that number and a large magnitude number. For example, in the following Perl code: my $x = 100000.0; my $y = int($x * 1e-5) * 1e5; # '0' my $z = int($x / 1e+5) * 1e5; # '100000' print "\$y is $y and \$z is $z\n"; # $y is 0 and $z is 100000 Although one would expect the quantities $y and $z to be the same and equal to 100000 they will differ and instead will be 0 and 100000 respectively. The problem can be further examined in a roughly equivalent C program: #include <stdio.h> #include <math.h> main() { double r1,r2; double x = 100000.0; double y = 0.0; double z = 0.0; x = 100000.0 * 1e-5; r1 = modf (x,&y); x = 100000.0 / 1e+5; r2 = modf (x,&z); printf("y is %e and z is %e\n",y*1e5,z*1e5); /* y is 0.000000e+00 and z is 1.000000e+05 (with c89) */ } =head2 Modules and Extensions for Perl on OS/390 Pure Perl (that is non XS) modules may be installed via the usual: perl Makefile.PL make make test make install If you built perl with dynamic loading capability then that would also be the way to build XS based extensions. However, if you built perl with the default static linking you can still build XS based extensions for OS/390 but you will need to follow the instructions in ExtUtils::MakeMaker for building statically linked perl binaries. In the simplest configurations building a static perl + XS extension boils down to: perl Makefile.PL make make perl make test make install make -f Makefile.aperl inst_perl MAP_TARGET=perl In most cases people have reported better results with GNU make rather than the system's /bin/make program, whether for plain modules or for XS based extensions. If the make process encounters trouble with either compilation or linking then try setting the _C89_CCMODE to 1. Assuming sh is your login shell then run: export _C89_CCMODE=1 If tcsh is your login shell then use the setenv command. =head1 AUTHORS David Fiander and Peter Prymmer with thanks to Dennis Longnecker and William Raffloer for valuable reports, LPAR and PTF feedback. Thanks to Mike MacIsaac and Egon Terwedow for SG24-5944-00. Thanks to Ignasi Roca for pointing out the floating point problems. Thanks to John Goodyear for dynamic loading help. =head1 SEE ALSO L<INSTALL>, L<perlport>, L<perlebcdic>, L<ExtUtils::MakeMaker>. http://www.ibm.com/servers/eserver/zseries/zos/unix/bpxa1toy.html http://www.redbooks.ibm.com/redbooks/SG245944.html http://www.ibm.com/servers/eserver/zseries/zos/unix/bpxa1ty1.html#opensrc http://www.xray.mpe.mpg.de/mailing-lists/perl-mvs/ http://publibz.boulder.ibm.com:80/cgi-bin/bookmgr_OS390/BOOKS/ceea3030/ http://publibz.boulder.ibm.com:80/cgi-bin/bookmgr_OS390/BOOKS/CBCUG030/ =head2 Mailing list for Perl on OS/390 If you are interested in the z/OS (formerly known as OS/390) and POSIX-BC (BS2000) ports of Perl then see the perl-mvs mailing list. To subscribe, send an empty message to perl-mvs-subscribe@perl.org. See also: https://lists.perl.org/list/perl-mvs.html There are web archives of the mailing list at: https://www.nntp.perl.org/group/perl.mvs/ =head1 HISTORY This document was originally written by David Fiander for the 5.005 release of Perl. This document was podified for the 5.005_03 release of Perl 11 March 1999. Updated 12 November 2000 for the 5.7.1 release of Perl. Updated 15 January 2001 for the 5.7.1 release of Perl. Updated 24 January 2001 to mention dynamic loading. Updated 12 March 2001 to mention //'SYS1.TCPPARMS(TCPDATA)'. Updated 28 November 2001 for broken URLs. Updated 03 October 2019 for perl-5.32.0+ =cut perlunicode.pod 0000644 00000262331 15125556335 0007602 0 ustar 00 =head1 NAME perlunicode - Unicode support in Perl =head1 DESCRIPTION If you haven't already, before reading this document, you should become familiar with both L<perlunitut> and L<perluniintro>. Unicode aims to B<UNI>-fy the en-B<CODE>-ings of all the world's character sets into a single Standard. For quite a few of the various coding standards that existed when Unicode was first created, converting from each to Unicode essentially meant adding a constant to each code point in the original standard, and converting back meant just subtracting that same constant. For ASCII and ISO-8859-1, the constant is 0. For ISO-8859-5, (Cyrillic) the constant is 864; for Hebrew (ISO-8859-8), it's 1488; Thai (ISO-8859-11), 3424; and so forth. This made it easy to do the conversions, and facilitated the adoption of Unicode. And it worked; nowadays, those legacy standards are rarely used. Most everyone uses Unicode. Unicode is a comprehensive standard. It specifies many things outside the scope of Perl, such as how to display sequences of characters. For a full discussion of all aspects of Unicode, see L<https://www.unicode.org>. =head2 Important Caveats Even though some of this section may not be understandable to you on first reading, we think it's important enough to highlight some of the gotchas before delving further, so here goes: Unicode support is an extensive requirement. While Perl does not implement the Unicode standard or the accompanying technical reports from cover to cover, Perl does support many Unicode features. Also, the use of Unicode may present security issues that aren't obvious, see L</Security Implications of Unicode> below. =over 4 =item Safest if you C<use feature 'unicode_strings'> In order to preserve backward compatibility, Perl does not turn on full internal Unicode support unless the pragma L<S<C<use feature 'unicode_strings'>>|feature/The 'unicode_strings' feature> is specified. (This is automatically selected if you S<C<use 5.012>> or higher.) Failure to do this can trigger unexpected surprises. See L</The "Unicode Bug"> below. This pragma doesn't affect I/O. Nor does it change the internal representation of strings, only their interpretation. There are still several places where Unicode isn't fully supported, such as in filenames. =item Input and Output Layers Use the C<:encoding(...)> layer to read from and write to filehandles using the specified encoding. (See L<open>.) =item You must convert your non-ASCII, non-UTF-8 Perl scripts to be UTF-8. The L<encoding> module has been deprecated since perl 5.18 and the perl internals it requires have been removed with perl 5.26. =item C<use utf8> still needed to enable L<UTF-8|/Unicode Encodings> in scripts If your Perl script is itself encoded in L<UTF-8|/Unicode Encodings>, the S<C<use utf8>> pragma must be explicitly included to enable recognition of that (in string or regular expression literals, or in identifier names). B<This is the only time when an explicit S<C<use utf8>> is needed.> (See L<utf8>). If a Perl script begins with the bytes that form the UTF-8 encoding of the Unicode BYTE ORDER MARK (C<BOM>, see L</Unicode Encodings>), those bytes are completely ignored. =item L<UTF-16|/Unicode Encodings> scripts autodetected If a Perl script begins with the Unicode C<BOM> (UTF-16LE, UTF16-BE), or if the script looks like non-C<BOM>-marked UTF-16 of either endianness, Perl will correctly read in the script as the appropriate Unicode encoding. =back =head2 Byte and Character Semantics Before Unicode, most encodings used 8 bits (a single byte) to encode each character. Thus a character was a byte, and a byte was a character, and there could be only 256 or fewer possible characters. "Byte Semantics" in the title of this section refers to this behavior. There was no need to distinguish between "Byte" and "Character". Then along comes Unicode which has room for over a million characters (and Perl allows for even more). This means that a character may require more than a single byte to represent it, and so the two terms are no longer equivalent. What matter are the characters as whole entities, and not usually the bytes that comprise them. That's what the term "Character Semantics" in the title of this section refers to. Perl had to change internally to decouple "bytes" from "characters". It is important that you too change your ideas, if you haven't already, so that "byte" and "character" no longer mean the same thing in your mind. The basic building block of Perl strings has always been a "character". The changes basically come down to that the implementation no longer thinks that a character is always just a single byte. There are various things to note: =over 4 =item * String handling functions, for the most part, continue to operate in terms of characters. C<length()>, for example, returns the number of characters in a string, just as before. But that number no longer is necessarily the same as the number of bytes in the string (there may be more bytes than characters). The other such functions include C<chop()>, C<chomp()>, C<substr()>, C<pos()>, C<index()>, C<rindex()>, C<sort()>, C<sprintf()>, and C<write()>. The exceptions are: =over 4 =item * the bit-oriented C<vec> E<nbsp> =item * the byte-oriented C<pack>/C<unpack> C<"C"> format However, the C<W> specifier does operate on whole characters, as does the C<U> specifier. =item * some operators that interact with the platform's operating system Operators dealing with filenames are examples. =item * when the functions are called from within the scope of the S<C<L<use bytes|bytes>>> pragma Likely, you should use this only for debugging anyway. =back =item * Strings--including hash keys--and regular expression patterns may contain characters that have ordinal values larger than 255. If you use a Unicode editor to edit your program, Unicode characters may occur directly within the literal strings in UTF-8 encoding, or UTF-16. (The former requires a C<use utf8>, the latter may require a C<BOM>.) L<perluniintro/Creating Unicode> gives other ways to place non-ASCII characters in your strings. =item * The C<chr()> and C<ord()> functions work on whole characters. =item * Regular expressions match whole characters. For example, C<"."> matches a whole character instead of only a single byte. =item * The C<tr///> operator translates whole characters. (Note that the C<tr///CU> functionality has been removed. For similar functionality to that, see C<pack('U0', ...)> and C<pack('C0', ...)>). =item * C<scalar reverse()> reverses by character rather than by byte. =item * The bit string operators, C<& | ^ ~> and (starting in v5.22) C<&. |. ^. ~.> can operate on bit strings encoded in UTF-8, but this can give unexpected results if any of the strings contain code points above 0xFF. Starting in v5.28, it is a fatal error to have such an operand. Otherwise, the operation is performed on a non-UTF-8 copy of the operand. If you're not sure about the encoding of a string, downgrade it before using any of these operators; you can use L<C<utf8::utf8_downgrade()>|utf8/Utility functions>. =back The bottom line is that Perl has always practiced "Character Semantics", but with the advent of Unicode, that is now different than "Byte Semantics". =head2 ASCII Rules versus Unicode Rules Before Unicode, when a character was a byte was a character, Perl knew only about the 128 characters defined by ASCII, code points 0 through 127 (except for under L<S<C<use locale>>|perllocale>). That left the code points 128 to 255 as unassigned, and available for whatever use a program might want. The only semantics they have is their ordinal numbers, and that they are members of none of the non-negative character classes. None are considered to match C<\w> for example, but all match C<\W>. Unicode, of course, assigns each of those code points a particular meaning (along with ones above 255). To preserve backward compatibility, Perl only uses the Unicode meanings when there is some indication that Unicode is what is intended; otherwise the non-ASCII code points remain treated as if they are unassigned. Here are the ways that Perl knows that a string should be treated as Unicode: =over =item * Within the scope of S<C<use utf8>> If the whole program is Unicode (signified by using 8-bit B<U>nicode B<T>ransformation B<F>ormat), then all literal strings within it must be Unicode. =item * Within the scope of L<S<C<use feature 'unicode_strings'>>|feature/The 'unicode_strings' feature> This pragma was created so you can explicitly tell Perl that operations executed within its scope are to use Unicode rules. More operations are affected with newer perls. See L</The "Unicode Bug">. =item * Within the scope of S<C<use 5.012>> or higher This implicitly turns on S<C<use feature 'unicode_strings'>>. =item * Within the scope of L<S<C<use locale 'not_characters'>>|perllocale/Unicode and UTF-8>, or L<S<C<use locale>>|perllocale> and the current locale is a UTF-8 locale. The former is defined to imply Unicode handling; and the latter indicates a Unicode locale, hence a Unicode interpretation of all strings within it. =item * When the string contains a Unicode-only code point Perl has never accepted code points above 255 without them being Unicode, so their use implies Unicode for the whole string. =item * When the string contains a Unicode named code point C<\N{...}> The C<\N{...}> construct explicitly refers to a Unicode code point, even if it is one that is also in ASCII. Therefore the string containing it must be Unicode. =item * When the string has come from an external source marked as Unicode The L<C<-C>|perlrun/-C [numberE<sol>list]> command line option can specify that certain inputs to the program are Unicode, and the values of this can be read by your Perl code, see L<perlvar/"${^UNICODE}">. =item * When the string has been upgraded to UTF-8 The function L<C<utf8::utf8_upgrade()>|utf8/Utility functions> can be explicitly used to permanently (unless a subsequent C<utf8::utf8_downgrade()> is called) cause a string to be treated as Unicode. =item * There are additional methods for regular expression patterns A pattern that is compiled with the C<< /u >> or C<< /a >> modifiers is treated as Unicode (though there are some restrictions with C<< /a >>). Under the C<< /d >> and C<< /l >> modifiers, there are several other indications for Unicode; see L<perlre/Character set modifiers>. =back Note that all of the above are overridden within the scope of C<L<use bytes|bytes>>; but you should be using this pragma only for debugging. Note also that some interactions with the platform's operating system never use Unicode rules. When Unicode rules are in effect: =over 4 =item * Case translation operators use the Unicode case translation tables. Note that C<uc()>, or C<\U> in interpolated strings, translates to uppercase, while C<ucfirst>, or C<\u> in interpolated strings, translates to titlecase in languages that make the distinction (which is equivalent to uppercase in languages without the distinction). There is a CPAN module, C<L<Unicode::Casing>>, which allows you to define your own mappings to be used in C<lc()>, C<lcfirst()>, C<uc()>, C<ucfirst()>, and C<fc> (or their double-quoted string inlined versions such as C<\U>). (Prior to Perl 5.16, this functionality was partially provided in the Perl core, but suffered from a number of insurmountable drawbacks, so the CPAN module was written instead.) =item * Character classes in regular expressions match based on the character properties specified in the Unicode properties database. C<\w> can be used to match a Japanese ideograph, for instance; and C<[[:digit:]]> a Bengali number. =item * Named Unicode properties, scripts, and block ranges may be used (like bracketed character classes) by using the C<\p{}> "matches property" construct and the C<\P{}> negation, "doesn't match property". See L</"Unicode Character Properties"> for more details. You can define your own character properties and use them in the regular expression with the C<\p{}> or C<\P{}> construct. See L</"User-Defined Character Properties"> for more details. =back =head2 Extended Grapheme Clusters (Logical characters) Consider a character, say C<H>. It could appear with various marks around it, such as an acute accent, or a circumflex, or various hooks, circles, arrows, I<etc.>, above, below, to one side or the other, I<etc>. There are many possibilities among the world's languages. The number of combinations is astronomical, and if there were a character for each combination, it would soon exhaust Unicode's more than a million possible characters. So Unicode took a different approach: there is a character for the base C<H>, and a character for each of the possible marks, and these can be variously combined to get a final logical character. So a logical character--what appears to be a single character--can be a sequence of more than one individual characters. The Unicode standard calls these "extended grapheme clusters" (which is an improved version of the no-longer much used "grapheme cluster"); Perl furnishes the C<\X> regular expression construct to match such sequences in their entirety. But Unicode's intent is to unify the existing character set standards and practices, and several pre-existing standards have single characters that mean the same thing as some of these combinations, like ISO-8859-1, which has quite a few of them. For example, C<"LATIN CAPITAL LETTER E WITH ACUTE"> was already in this standard when Unicode came along. Unicode therefore added it to its repertoire as that single character. But this character is considered by Unicode to be equivalent to the sequence consisting of the character C<"LATIN CAPITAL LETTER E"> followed by the character C<"COMBINING ACUTE ACCENT">. C<"LATIN CAPITAL LETTER E WITH ACUTE"> is called a "pre-composed" character, and its equivalence with the "E" and the "COMBINING ACCENT" sequence is called canonical equivalence. All pre-composed characters are said to have a decomposition (into the equivalent sequence), and the decomposition type is also called canonical. A string may be comprised as much as possible of precomposed characters, or it may be comprised of entirely decomposed characters. Unicode calls these respectively, "Normalization Form Composed" (NFC) and "Normalization Form Decomposed". The C<L<Unicode::Normalize>> module contains functions that convert between the two. A string may also have both composed characters and decomposed characters; this module can be used to make it all one or the other. You may be presented with strings in any of these equivalent forms. There is currently nothing in Perl 5 that ignores the differences. So you'll have to specially handle it. The usual advice is to convert your inputs to C<NFD> before processing further. For more detailed information, see L<http://unicode.org/reports/tr15/>. =head2 Unicode Character Properties (The only time that Perl considers a sequence of individual code points as a single logical character is in the C<\X> construct, already mentioned above. Therefore "character" in this discussion means a single Unicode code point.) Very nearly all Unicode character properties are accessible through regular expressions by using the C<\p{}> "matches property" construct and the C<\P{}> "doesn't match property" for its negation. For instance, C<\p{Uppercase}> matches any single character with the Unicode C<"Uppercase"> property, while C<\p{L}> matches any character with a C<General_Category> of C<"L"> (letter) property (see L</General_Category> below). Brackets are not required for single letter property names, so C<\p{L}> is equivalent to C<\pL>. More formally, C<\p{Uppercase}> matches any single character whose Unicode C<Uppercase> property value is C<True>, and C<\P{Uppercase}> matches any character whose C<Uppercase> property value is C<False>, and they could have been written as C<\p{Uppercase=True}> and C<\p{Uppercase=False}>, respectively. This formality is needed when properties are not binary; that is, if they can take on more values than just C<True> and C<False>. For example, the C<Bidi_Class> property (see L</"Bidirectional Character Types"> below), can take on several different values, such as C<Left>, C<Right>, C<Whitespace>, and others. To match these, one needs to specify both the property name (C<Bidi_Class>), AND the value being matched against (C<Left>, C<Right>, I<etc.>). This is done, as in the examples above, by having the two components separated by an equal sign (or interchangeably, a colon), like C<\p{Bidi_Class: Left}>. All Unicode-defined character properties may be written in these compound forms of C<\p{I<property>=I<value>}> or C<\p{I<property>:I<value>}>, but Perl provides some additional properties that are written only in the single form, as well as single-form short-cuts for all binary properties and certain others described below, in which you may omit the property name and the equals or colon separator. Most Unicode character properties have at least two synonyms (or aliases if you prefer): a short one that is easier to type and a longer one that is more descriptive and hence easier to understand. Thus the C<"L"> and C<"Letter"> properties above are equivalent and can be used interchangeably. Likewise, C<"Upper"> is a synonym for C<"Uppercase">, and we could have written C<\p{Uppercase}> equivalently as C<\p{Upper}>. Also, there are typically various synonyms for the values the property can be. For binary properties, C<"True"> has 3 synonyms: C<"T">, C<"Yes">, and C<"Y">; and C<"False"> has correspondingly C<"F">, C<"No">, and C<"N">. But be careful. A short form of a value for one property may not mean the same thing as the short form spelled the same for another. Thus, for the C<L</General_Category>> property, C<"L"> means C<"Letter">, but for the L<C<Bidi_Class>|/Bidirectional Character Types> property, C<"L"> means C<"Left">. A complete list of properties and synonyms is in L<perluniprops>. Upper/lower case differences in property names and values are irrelevant; thus C<\p{Upper}> means the same thing as C<\p{upper}> or even C<\p{UpPeR}>. Similarly, you can add or subtract underscores anywhere in the middle of a word, so that these are also equivalent to C<\p{U_p_p_e_r}>. And white space is generally irrelevant adjacent to non-word characters, such as the braces and the equals or colon separators, so C<\p{ Upper }> and C<\p{ Upper_case : Y }> are equivalent to these as well. In fact, white space and even hyphens can usually be added or deleted anywhere. So even C<\p{ Up-per case = Yes}> is equivalent. All this is called "loose-matching" by Unicode. The "name" property has some restrictions on this due to a few outlier names. Full details are given in L<https://www.unicode.org/reports/tr44/tr44-24.html#UAX44-LM2>. The few places where stricter matching is used is in the middle of numbers, the "name" property, and in the Perl extension properties that begin or end with an underscore. Stricter matching cares about white space (except adjacent to non-word characters), hyphens, and non-interior underscores. You can also use negation in both C<\p{}> and C<\P{}> by introducing a caret (C<^>) between the first brace and the property name: C<\p{^Tamil}> is equal to C<\P{Tamil}>. Almost all properties are immune to case-insensitive matching. That is, adding a C</i> regular expression modifier does not change what they match. There are two sets that are affected. The first set is C<Uppercase_Letter>, C<Lowercase_Letter>, and C<Titlecase_Letter>, all of which match C<Cased_Letter> under C</i> matching. And the second set is C<Uppercase>, C<Lowercase>, and C<Titlecase>, all of which match C<Cased> under C</i> matching. This set also includes its subsets C<PosixUpper> and C<PosixLower> both of which under C</i> match C<PosixAlpha>. (The difference between these sets is that some things, such as Roman numerals, come in both upper and lower case so they are C<Cased>, but aren't considered letters, so they aren't C<Cased_Letter>'s.) See L</Beyond Unicode code points> for special considerations when matching Unicode properties against non-Unicode code points. =head3 B<General_Category> Every Unicode character is assigned a general category, which is the "most usual categorization of a character" (from L<https://www.unicode.org/reports/tr44>). The compound way of writing these is like C<\p{General_Category=Number}> (short: C<\p{gc:n}>). But Perl furnishes shortcuts in which everything up through the equal or colon separator is omitted. So you can instead just write C<\pN>. Here are the short and long forms of the values the C<General Category> property can have: Short Long L Letter LC, L& Cased_Letter (that is: [\p{Ll}\p{Lu}\p{Lt}]) Lu Uppercase_Letter Ll Lowercase_Letter Lt Titlecase_Letter Lm Modifier_Letter Lo Other_Letter M Mark Mn Nonspacing_Mark Mc Spacing_Mark Me Enclosing_Mark N Number Nd Decimal_Number (also Digit) Nl Letter_Number No Other_Number P Punctuation (also Punct) Pc Connector_Punctuation Pd Dash_Punctuation Ps Open_Punctuation Pe Close_Punctuation Pi Initial_Punctuation (may behave like Ps or Pe depending on usage) Pf Final_Punctuation (may behave like Ps or Pe depending on usage) Po Other_Punctuation S Symbol Sm Math_Symbol Sc Currency_Symbol Sk Modifier_Symbol So Other_Symbol Z Separator Zs Space_Separator Zl Line_Separator Zp Paragraph_Separator C Other Cc Control (also Cntrl) Cf Format Cs Surrogate Co Private_Use Cn Unassigned Single-letter properties match all characters in any of the two-letter sub-properties starting with the same letter. C<LC> and C<L&> are special: both are aliases for the set consisting of everything matched by C<Ll>, C<Lu>, and C<Lt>. =head3 B<Bidirectional Character Types> Because scripts differ in their directionality (Hebrew and Arabic are written right to left, for example) Unicode supplies a C<Bidi_Class> property. Some of the values this property can have are: Value Meaning L Left-to-Right LRE Left-to-Right Embedding LRO Left-to-Right Override R Right-to-Left AL Arabic Letter RLE Right-to-Left Embedding RLO Right-to-Left Override PDF Pop Directional Format EN European Number ES European Separator ET European Terminator AN Arabic Number CS Common Separator NSM Non-Spacing Mark BN Boundary Neutral B Paragraph Separator S Segment Separator WS Whitespace ON Other Neutrals This property is always written in the compound form. For example, C<\p{Bidi_Class:R}> matches characters that are normally written right to left. Unlike the C<L</General_Category>> property, this property can have more values added in a future Unicode release. Those listed above comprised the complete set for many Unicode releases, but others were added in Unicode 6.3; you can always find what the current ones are in L<perluniprops>. And L<https://www.unicode.org/reports/tr9/> describes how to use them. =head3 B<Scripts> The world's languages are written in many different scripts. This sentence (unless you're reading it in translation) is written in Latin, while Russian is written in Cyrillic, and Greek is written in, well, Greek; Japanese mainly in Hiragana or Katakana. There are many more. The Unicode C<Script> and C<Script_Extensions> properties give what script a given character is in. The C<Script_Extensions> property is an improved version of C<Script>, as demonstrated below. Either property can be specified with the compound form like C<\p{Script=Hebrew}> (short: C<\p{sc=hebr}>), or C<\p{Script_Extensions=Javanese}> (short: C<\p{scx=java}>). In addition, Perl furnishes shortcuts for all C<Script_Extensions> property names. You can omit everything up through the equals (or colon), and simply write C<\p{Latin}> or C<\P{Cyrillic}>. (This is not true for C<Script>, which is required to be written in the compound form. Prior to Perl v5.26, the single form returned the plain old C<Script> version, but was changed because C<Script_Extensions> gives better results.) The difference between these two properties involves characters that are used in multiple scripts. For example the digits '0' through '9' are used in many parts of the world. These are placed in a script named C<Common>. Other characters are used in just a few scripts. For example, the C<"KATAKANA-HIRAGANA DOUBLE HYPHEN"> is used in both Japanese scripts, Katakana and Hiragana, but nowhere else. The C<Script> property places all characters that are used in multiple scripts in the C<Common> script, while the C<Script_Extensions> property places those that are used in only a few scripts into each of those scripts; while still using C<Common> for those used in many scripts. Thus both these match: "0" =~ /\p{sc=Common}/ # Matches "0" =~ /\p{scx=Common}/ # Matches and only the first of these match: "\N{KATAKANA-HIRAGANA DOUBLE HYPHEN}" =~ /\p{sc=Common} # Matches "\N{KATAKANA-HIRAGANA DOUBLE HYPHEN}" =~ /\p{scx=Common} # No match And only the last two of these match: "\N{KATAKANA-HIRAGANA DOUBLE HYPHEN}" =~ /\p{sc=Hiragana} # No match "\N{KATAKANA-HIRAGANA DOUBLE HYPHEN}" =~ /\p{sc=Katakana} # No match "\N{KATAKANA-HIRAGANA DOUBLE HYPHEN}" =~ /\p{scx=Hiragana} # Matches "\N{KATAKANA-HIRAGANA DOUBLE HYPHEN}" =~ /\p{scx=Katakana} # Matches C<Script_Extensions> is thus an improved C<Script>, in which there are fewer characters in the C<Common> script, and correspondingly more in other scripts. It is new in Unicode version 6.0, and its data are likely to change significantly in later releases, as things get sorted out. New code should probably be using C<Script_Extensions> and not plain C<Script>. If you compile perl with a Unicode release that doesn't have C<Script_Extensions>, the single form Perl extensions will instead refer to the plain C<Script> property. If you compile with a version of Unicode that doesn't have the C<Script> property, these extensions will not be defined at all. (Actually, besides C<Common>, the C<Inherited> script, contains characters that are used in multiple scripts. These are modifier characters which inherit the script value of the controlling character. Some of these are used in many scripts, and so go into C<Inherited> in both C<Script> and C<Script_Extensions>. Others are used in just a few scripts, so are in C<Inherited> in C<Script>, but not in C<Script_Extensions>.) It is worth stressing that there are several different sets of digits in Unicode that are equivalent to 0-9 and are matchable by C<\d> in a regular expression. If they are used in a single language only, they are in that language's C<Script> and C<Script_Extensions>. If they are used in more than one script, they will be in C<sc=Common>, but only if they are used in many scripts should they be in C<scx=Common>. The explanation above has omitted some detail; refer to UAX#24 "Unicode Script Property": L<https://www.unicode.org/reports/tr24>. A complete list of scripts and their shortcuts is in L<perluniprops>. =head3 B<Use of the C<"Is"> Prefix> For backward compatibility (with ancient Perl 5.6), all properties writable without using the compound form mentioned so far may have C<Is> or C<Is_> prepended to their name, so C<\P{Is_Lu}>, for example, is equal to C<\P{Lu}>, and C<\p{IsScript:Arabic}> is equal to C<\p{Arabic}>. =head3 B<Blocks> In addition to B<scripts>, Unicode also defines B<blocks> of characters. The difference between scripts and blocks is that the concept of scripts is closer to natural languages, while the concept of blocks is more of an artificial grouping based on groups of Unicode characters with consecutive ordinal values. For example, the C<"Basic Latin"> block is all the characters whose ordinals are between 0 and 127, inclusive; in other words, the ASCII characters. The C<"Latin"> script contains some letters from this as well as several other blocks, like C<"Latin-1 Supplement">, C<"Latin Extended-A">, I<etc.>, but it does not contain all the characters from those blocks. It does not, for example, contain the digits 0-9, because those digits are shared across many scripts, and hence are in the C<Common> script. For more about scripts versus blocks, see UAX#24 "Unicode Script Property": L<https://www.unicode.org/reports/tr24> The C<Script_Extensions> or C<Script> properties are likely to be the ones you want to use when processing natural language; the C<Block> property may occasionally be useful in working with the nuts and bolts of Unicode. Block names are matched in the compound form, like C<\p{Block: Arrows}> or C<\p{Blk=Hebrew}>. Unlike most other properties, only a few block names have a Unicode-defined short name. Perl also defines single form synonyms for the block property in cases where these do not conflict with something else. But don't use any of these, because they are unstable. Since these are Perl extensions, they are subordinate to official Unicode property names; Unicode doesn't know nor care about Perl's extensions. It may happen that a name that currently means the Perl extension will later be changed without warning to mean a different Unicode property in a future version of the perl interpreter that uses a later Unicode release, and your code would no longer work. The extensions are mentioned here for completeness: Take the block name and prefix it with one of: C<In> (for example C<\p{Blk=Arrows}> can currently be written as C<\p{In_Arrows}>); or sometimes C<Is> (like C<\p{Is_Arrows}>); or sometimes no prefix at all (C<\p{Arrows}>). As of this writing (Unicode 9.0) there are no conflicts with using the C<In_> prefix, but there are plenty with the other two forms. For example, C<\p{Is_Hebrew}> and C<\p{Hebrew}> mean C<\p{Script_Extensions=Hebrew}> which is NOT the same thing as C<\p{Blk=Hebrew}>. Our advice used to be to use the C<In_> prefix as a single form way of specifying a block. But Unicode 8.0 added properties whose names begin with C<In>, and it's now clear that it's only luck that's so far prevented a conflict. Using C<In> is only marginally less typing than C<Blk:>, and the latter's meaning is clearer anyway, and guaranteed to never conflict. So don't take chances. Use C<\p{Blk=foo}> for new code. And be sure that block is what you really really want to do. In most cases scripts are what you want instead. A complete list of blocks is in L<perluniprops>. =head3 B<Other Properties> There are many more properties than the very basic ones described here. A complete list is in L<perluniprops>. Unicode defines all its properties in the compound form, so all single-form properties are Perl extensions. Most of these are just synonyms for the Unicode ones, but some are genuine extensions, including several that are in the compound form. And quite a few of these are actually recommended by Unicode (in L<https://www.unicode.org/reports/tr18>). This section gives some details on all extensions that aren't just synonyms for compound-form Unicode properties (for those properties, you'll have to refer to the L<Unicode Standard|https://www.unicode.org/reports/tr44>. =over =item B<C<\p{All}>> This matches every possible code point. It is equivalent to C<qr/./s>. Unlike all the other non-user-defined C<\p{}> property matches, no warning is ever generated if this is property is matched against a non-Unicode code point (see L</Beyond Unicode code points> below). =item B<C<\p{Alnum}>> This matches any C<\p{Alphabetic}> or C<\p{Decimal_Number}> character. =item B<C<\p{Any}>> This matches any of the 1_114_112 Unicode code points. It is a synonym for C<\p{Unicode}>. =item B<C<\p{ASCII}>> This matches any of the 128 characters in the US-ASCII character set, which is a subset of Unicode. =item B<C<\p{Assigned}>> This matches any assigned code point; that is, any code point whose L<general category|/General_Category> is not C<Unassigned> (or equivalently, not C<Cn>). =item B<C<\p{Blank}>> This is the same as C<\h> and C<\p{HorizSpace}>: A character that changes the spacing horizontally. =item B<C<\p{Decomposition_Type: Non_Canonical}>> (Short: C<\p{Dt=NonCanon}>) Matches a character that has a non-canonical decomposition. The L</Extended Grapheme Clusters (Logical characters)> section above talked about canonical decompositions. However, many more characters have a different type of decomposition, a "compatible" or "non-canonical" decomposition. The sequences that form these decompositions are not considered canonically equivalent to the pre-composed character. An example is the C<"SUPERSCRIPT ONE">. It is somewhat like a regular digit 1, but not exactly; its decomposition into the digit 1 is called a "compatible" decomposition, specifically a "super" decomposition. There are several such compatibility decompositions (see L<https://www.unicode.org/reports/tr44>), including one called "compat", which means some miscellaneous type of decomposition that doesn't fit into the other decomposition categories that Unicode has chosen. Note that most Unicode characters don't have a decomposition, so their decomposition type is C<"None">. For your convenience, Perl has added the C<Non_Canonical> decomposition type to mean any of the several compatibility decompositions. =item B<C<\p{Graph}>> Matches any character that is graphic. Theoretically, this means a character that on a printer would cause ink to be used. =item B<C<\p{HorizSpace}>> This is the same as C<\h> and C<\p{Blank}>: a character that changes the spacing horizontally. =item B<C<\p{In=*}>> This is a synonym for C<\p{Present_In=*}> =item B<C<\p{PerlSpace}>> This is the same as C<\s>, restricted to ASCII, namely C<S<[ \f\n\r\t]>> and starting in Perl v5.18, a vertical tab. Mnemonic: Perl's (original) space =item B<C<\p{PerlWord}>> This is the same as C<\w>, restricted to ASCII, namely C<[A-Za-z0-9_]> Mnemonic: Perl's (original) word. =item B<C<\p{Posix...}>> There are several of these, which are equivalents, using the C<\p{}> notation, for Posix classes and are described in L<perlrecharclass/POSIX Character Classes>. =item B<C<\p{Present_In: *}>> (Short: C<\p{In=*}>) This property is used when you need to know in what Unicode version(s) a character is. The "*" above stands for some Unicode version number, such as C<1.1> or C<12.0>; or the "*" can also be C<Unassigned>. This property will match the code points whose final disposition has been settled as of the Unicode release given by the version number; C<\p{Present_In: Unassigned}> will match those code points whose meaning has yet to be assigned. For example, C<U+0041> C<"LATIN CAPITAL LETTER A"> was present in the very first Unicode release available, which is C<1.1>, so this property is true for all valid "*" versions. On the other hand, C<U+1EFF> was not assigned until version 5.1 when it became C<"LATIN SMALL LETTER Y WITH LOOP">, so the only "*" that would match it are 5.1, 5.2, and later. Unicode furnishes the C<Age> property from which this is derived. The problem with Age is that a strict interpretation of it (which Perl takes) has it matching the precise release a code point's meaning is introduced in. Thus C<U+0041> would match only 1.1; and C<U+1EFF> only 5.1. This is not usually what you want. Some non-Perl implementations of the Age property may change its meaning to be the same as the Perl C<Present_In> property; just be aware of that. Another confusion with both these properties is that the definition is not that the code point has been I<assigned>, but that the meaning of the code point has been I<determined>. This is because 66 code points will always be unassigned, and so the C<Age> for them is the Unicode version in which the decision to make them so was made. For example, C<U+FDD0> is to be permanently unassigned to a character, and the decision to do that was made in version 3.1, so C<\p{Age=3.1}> matches this character, as also does C<\p{Present_In: 3.1}> and up. =item B<C<\p{Print}>> This matches any character that is graphical or blank, except controls. =item B<C<\p{SpacePerl}>> This is the same as C<\s>, including beyond ASCII. Mnemonic: Space, as modified by Perl. (It doesn't include the vertical tab until v5.18, which both the Posix standard and Unicode consider white space.) =item B<C<\p{Title}>> and B<C<\p{Titlecase}>> Under case-sensitive matching, these both match the same code points as C<\p{General Category=Titlecase_Letter}> (C<\p{gc=lt}>). The difference is that under C</i> caseless matching, these match the same as C<\p{Cased}>, whereas C<\p{gc=lt}> matches C<\p{Cased_Letter>). =item B<C<\p{Unicode}>> This matches any of the 1_114_112 Unicode code points. C<\p{Any}>. =item B<C<\p{VertSpace}>> This is the same as C<\v>: A character that changes the spacing vertically. =item B<C<\p{Word}>> This is the same as C<\w>, including over 100_000 characters beyond ASCII. =item B<C<\p{XPosix...}>> There are several of these, which are the standard Posix classes extended to the full Unicode range. They are described in L<perlrecharclass/POSIX Character Classes>. =back =head2 Comparison of C<\N{...}> and C<\p{name=...}> Starting in Perl 5.32, you can specify a character by its name in regular expression patterns using C<\p{name=...}>. This is in addition to the longstanding method of using C<\N{...}>. The following summarizes the differences between these two: \N{...} \p{Name=...} can interpolate only with eval yes [1] custom names yes no [2] name aliases yes yes [3] named sequences yes yes [4] name value parsing exact Unicode loose [5] =over =item [1] The ability to interpolate means you can do something like qr/\p{na=latin capital letter $which}/ and specify C<$which> elsewhere. =item [2] You can create your own names for characters, and override official ones when using C<\N{...}>. See L<charnames/CUSTOM ALIASES>. =item [3] Some characters have multiple names (synonyms). =item [4] Some particular sequences of characters are given a single name, in addition to their individual ones. =item [5] Exact name value matching means you have to specify case, hyphens, underscores, and spaces precisely in the name you want. Loose matching follows the Unicode rules L<https://www.unicode.org/reports/tr44/tr44-24.html#UAX44-LM2>, where these are mostly irrelevant. Except for a few outlier character names, these are the same rules as are already used for any other C<\p{...}> property. =back =head2 Wildcards in Property Values Starting in Perl 5.30, it is possible to do something like this: qr!\p{numeric_value=/\A[0-5]\z/}! or, by abbreviating and adding C</x>, qr! \p{nv= /(?x) \A [0-5] \z / }! This matches all code points whose numeric value is one of 0, 1, 2, 3, 4, or 5. This particular example could instead have been written as qr! \A [ \p{nv=0}\p{nv=1}\p{nv=2}\p{nv=3}\p{nv=4}\p{nv=5} ] \z !xx in earlier perls, so in this case this feature just makes things easier and shorter to write. If we hadn't included the C<\A> and C<\z>, these would have matched things like C<1E<sol>2> because that contains a 1 (as well as a 2). As written, it matches things like subscripts that have these numeric values. If we only wanted the decimal digits with those numeric values, we could say, qr! (?[ \d & \p{nv=/[0-5]/ ]) }!x The C<\d> gets rid of needing to anchor the pattern, since it forces the result to only match C<[0-9]>, and the C<[0-5]> further restricts it. The text in the above examples enclosed between the C<"E<sol>"> characters can be just about any regular expression. It is independent of the main pattern, so doesn't share any capturing groups, I<etc>. The delimiters for it must be ASCII punctuation, but it may NOT be delimited by C<"{">, nor C<"}"> nor contain a literal C<"}">, as that delimits the end of the enclosing C<\p{}>. Like any pattern, certain other delimiters are terminated by their mirror images. These are C<"(">, C<"[>", and C<"E<lt>">. If the delimiter is any of C<"-">, C<"_">, C<"+">, or C<"\">, or is the same delimiter as is used for the enclosing pattern, it must be preceded by a backslash escape, both fore and aft. Beware of using C<"$"> to indicate to match the end of the string. It can too easily be interpreted as being a punctuation variable, like C<$/>. No modifiers may follow the final delimiter. Instead, use L<perlre/(?adlupimnsx-imnsx)> and/or L<perlre/(?adluimnsx-imnsx:pattern)> to specify modifiers. However, certain modifiers are illegal in your wildcard subpattern. The only character set modifier specifiable is C</aa>; any other character set, and C<-m>, and C<p>, and C<s> are all illegal. Specifying modifiers like C<qr/.../gc> that aren't legal in the C<(?...)> notation normally raise a warning, but with wildcard subpatterns, their use is an error. The C<m> modifier is ineffective; everything that matches will be a single line. By default, your pattern is matched case-insensitively, as if C</i> had been specified. You can change this by saying C<(?-i)> in your pattern. There are also certain operations that are illegal. You can't nest C<\p{...}> and C<\P{...}> calls within a wildcard subpattern, and C<\G> doesn't make sense, so is also prohibited. And the C<*> quantifier (or its equivalent C<(0,}>) is illegal. This feature is not available when the left-hand side is prefixed by C<Is_>, nor for any form that is marked as "Discouraged" in L<perluniprops/Discouraged>. This experimental feature has been added to begin to implement L<https://www.unicode.org/reports/tr18/#Wildcard_Properties>. Using it will raise a (default-on) warning in the C<experimental::uniprop_wildcards> category. We reserve the right to change its operation as we gain experience. Your subpattern can be just about anything, but for it to have some utility, it should match when called with either or both of a) the full name of the property value with underscores (and/or spaces in the Block property) and some things uppercase; or b) the property value in all lowercase with spaces and underscores squeezed out. For example, qr!\p{Blk=/Old I.*/}! qr!\p{Blk=/oldi.*/}! would match the same things. Another example that shows that within C<\p{...}>, C</x> isn't needed to have spaces: qr!\p{scx= /Hebrew|Greek/ }! To be safe, we should have anchored the above example, to prevent matches for something like C<Hebrew_Braille>, but there aren't any script names like that, so far. A warning is issued if none of the legal values for a property are matched by your pattern. It's likely that a future release will raise a warning if your pattern ends up causing every possible code point to match. Starting in 5.32, the Name, Name Aliases, and Named Sequences properties are allowed to be matched. They are considered to be a single combination property, just as has long been the case for C<\N{}>. Loose matching doesn't work in exactly the same way for these as it does for the values of other properties. The rules are given in L<https://www.unicode.org/reports/tr44/tr44-24.html#UAX44-LM2>. As a result, Perl doesn't try loose matching for you, like it does in other properties. All letters in names are uppercase, but you can add C<(?i)> to your subpattern to ignore case. If you're uncertain where a blank is, you can use C< ?> in your subpattern. No character name contains an underscore, so don't bother trying to match one. The use of hyphens is particularly problematic; refer to the above link. But note that, as of Unicode 13.0, the only script in modern usage which has weirdnesses with these is Tibetan; also the two Korean characters U+116C HANGUL JUNGSEONG OE and U+1180 HANGUL JUNGSEONG O-E. Unicode makes no promises to not add hyphen-problematic names in the future. Using wildcards on these is resource intensive, given the hundreds of thousands of legal names that must be checked against. An example of using Name property wildcards is qr!\p{name=/(SMILING|GRINNING) FACE/}! Another is qr/(?[ \p{name=\/CJK\/} - \p{ideographic} ])/ which is the 200-ish (as of Unicode 13.0) CJK characters that aren't ideographs. There are certain properties that wildcard subpatterns don't currently work with. These are: Bidi Mirroring Glyph Bidi Paired Bracket Case Folding Decomposition Mapping Equivalent Unified Ideograph Lowercase Mapping NFKC Case Fold Titlecase Mapping Uppercase Mapping Nor is the C<@I<unicode_property>@> form implemented. Here's a complete example of matching IPV4 internet protocol addresses in any (single) script no warnings 'experimental::regex_sets'; no warnings 'experimental::uniprop_wildcards'; # Can match a substring, so this intermediate regex needs to have # context or anchoring in its final use. Using nt=de yields decimal # digits. When specifying a subset of these, we must include \d to # prevent things like U+00B2 SUPERSCRIPT TWO from matching my $zero_through_255 = qr/ \b (*sr: # All from same sript (?[ \p{nv=0} & \d ])* # Optional leading zeros ( # Then one of: \d{1,2} # 0 - 99 | (?[ \p{nv=1} & \d ]) \d{2} # 100 - 199 | (?[ \p{nv=2} & \d ]) ( (?[ \p{nv=:[0-4]:} & \d ]) \d # 200 - 249 | (?[ \p{nv=5} & \d ]) (?[ \p{nv=:[0-5]:} & \d ]) # 250 - 255 ) ) ) \b /x; my $ipv4 = qr/ \A (*sr: $zero_through_255 (?: [.] $zero_through_255 ) {3} ) \z /x; =head2 User-Defined Character Properties You can define your own binary character properties by defining subroutines whose names begin with C<"In"> or C<"Is">. (The experimental feature L<perlre/(?[ ])> provides an alternative which allows more complex definitions.) The subroutines can be defined in any package. They override any Unicode properties expressed as the same names. The user-defined properties can be used in the regular expression C<\p{}> and C<\P{}> constructs; if you are using a user-defined property from a package other than the one you are in, you must specify its package in the C<\p{}> or C<\P{}> construct. # assuming property Is_Foreign defined in Lang:: package main; # property package name required if ($txt =~ /\p{Lang::IsForeign}+/) { ... } package Lang; # property package name not required if ($txt =~ /\p{IsForeign}+/) { ... } Note that the effect is compile-time and immutable once defined. However, the subroutines are passed a single parameter, which is 0 if case-sensitive matching is in effect and non-zero if caseless matching is in effect. The subroutine may return different values depending on the value of the flag, and one set of values will immutably be in effect for all case-sensitive matches, and the other set for all case-insensitive matches. Note that if the regular expression is tainted, then Perl will die rather than calling the subroutine when the name of the subroutine is determined by the tainted data. The subroutines must return a specially-formatted string, with one or more newline-separated lines. Each line must be one of the following: =over 4 =item * A single hexadecimal number denoting a code point to include. =item * Two hexadecimal numbers separated by horizontal whitespace (space or tabular characters) denoting a range of code points to include. The second number must not be smaller than the first. =item * Something to include, prefixed by C<"+">: a built-in character property (prefixed by C<"utf8::">) or a fully qualified (including package name) user-defined character property, to represent all the characters in that property; two hexadecimal code points for a range; or a single hexadecimal code point. =item * Something to exclude, prefixed by C<"-">: an existing character property (prefixed by C<"utf8::">) or a fully qualified (including package name) user-defined character property, to represent all the characters in that property; two hexadecimal code points for a range; or a single hexadecimal code point. =item * Something to negate, prefixed C<"!">: an existing character property (prefixed by C<"utf8::">) or a fully qualified (including package name) user-defined character property, to represent all the characters in that property; two hexadecimal code points for a range; or a single hexadecimal code point. =item * Something to intersect with, prefixed by C<"&">: an existing character property (prefixed by C<"utf8::">) or a fully qualified (including package name) user-defined character property, for all the characters except the characters in the property; two hexadecimal code points for a range; or a single hexadecimal code point. =back For example, to define a property that covers both the Japanese syllabaries (hiragana and katakana), you can define sub InKana { return <<END; 3040\t309F 30A0\t30FF END } Imagine that the here-doc end marker is at the beginning of the line. Now you can use C<\p{InKana}> and C<\P{InKana}>. You could also have used the existing block property names: sub InKana { return <<'END'; +utf8::InHiragana +utf8::InKatakana END } Suppose you wanted to match only the allocated characters, not the raw block ranges: in other words, you want to remove the unassigned characters: sub InKana { return <<'END'; +utf8::InHiragana +utf8::InKatakana -utf8::IsCn END } The negation is useful for defining (surprise!) negated classes. sub InNotKana { return <<'END'; !utf8::InHiragana -utf8::InKatakana +utf8::IsCn END } This will match all non-Unicode code points, since every one of them is not in Kana. You can use intersection to exclude these, if desired, as this modified example shows: sub InNotKana { return <<'END'; !utf8::InHiragana -utf8::InKatakana +utf8::IsCn &utf8::Any END } C<&utf8::Any> must be the last line in the definition. Intersection is used generally for getting the common characters matched by two (or more) classes. It's important to remember not to use C<"&"> for the first set; that would be intersecting with nothing, resulting in an empty set. (Similarly using C<"-"> for the first set does nothing). Unlike non-user-defined C<\p{}> property matches, no warning is ever generated if these properties are matched against a non-Unicode code point (see L</Beyond Unicode code points> below). =head2 User-Defined Case Mappings (for serious hackers only) B<This feature has been removed as of Perl 5.16.> The CPAN module C<L<Unicode::Casing>> provides better functionality without the drawbacks that this feature had. If you are using a Perl earlier than 5.16, this feature was most fully documented in the 5.14 version of this pod: L<http://perldoc.perl.org/5.14.0/perlunicode.html#User-Defined-Case-Mappings-%28for-serious-hackers-only%29> =head2 Character Encodings for Input and Output See L<Encode>. =head2 Unicode Regular Expression Support Level The following list of Unicode supported features for regular expressions describes all features currently directly supported by core Perl. The references to "Level I<N>" and the section numbers refer to L<UTS#18 "Unicode Regular Expressions"|https://www.unicode.org/reports/tr18>, version 18, October 2016. =head3 Level 1 - Basic Unicode Support RL1.1 Hex Notation - Done [1] RL1.2 Properties - Done [2] RL1.2a Compatibility Properties - Done [3] RL1.3 Subtraction and Intersection - Experimental [4] RL1.4 Simple Word Boundaries - Done [5] RL1.5 Simple Loose Matches - Done [6] RL1.6 Line Boundaries - Partial [7] RL1.7 Supplementary Code Points - Done [8] =over 4 =item [1] C<\N{U+...}> and C<\x{...}> =item [2] C<\p{...}> C<\P{...}>. This requirement is for a minimal list of properties. Perl supports these. See R2.7 for other properties. =item [3] Perl has C<\d> C<\D> C<\s> C<\S> C<\w> C<\W> C<\X> C<[:I<prop>:]> C<[:^I<prop>:]>, plus all the properties specified by L<https://www.unicode.org/reports/tr18/#Compatibility_Properties>. These are described above in L</Other Properties> =item [4] The experimental feature C<"(?[...])"> starting in v5.18 accomplishes this. See L<perlre/(?[ ])>. If you don't want to use an experimental feature, you can use one of the following: =over 4 =item * Regular expression lookahead You can mimic class subtraction using lookahead. For example, what UTS#18 might write as [{Block=Greek}-[{UNASSIGNED}]] in Perl can be written as: (?!\p{Unassigned})\p{Block=Greek} (?=\p{Assigned})\p{Block=Greek} But in this particular example, you probably really want \p{Greek} which will match assigned characters known to be part of the Greek script. =item * CPAN module C<L<Unicode::Regex::Set>> It does implement the full UTS#18 grouping, intersection, union, and removal (subtraction) syntax. =item * L</"User-Defined Character Properties"> C<"+"> for union, C<"-"> for removal (set-difference), C<"&"> for intersection =back =item [5] C<\b> C<\B> meet most, but not all, the details of this requirement, but C<\b{wb}> and C<\B{wb}> do, as well as the stricter R2.3. =item [6] Note that Perl does Full case-folding in matching, not Simple: For example C<U+1F88> is equivalent to C<U+1F00 U+03B9>, instead of just C<U+1F80>. This difference matters mainly for certain Greek capital letters with certain modifiers: the Full case-folding decomposes the letter, while the Simple case-folding would map it to a single character. =item [7] The reason this is considered to be only partially implemented is that Perl has L<C<qrE<sol>\b{lb}E<sol>>|perlrebackslash/\b{lb}> and C<L<Unicode::LineBreak>> that are conformant with L<UAX#14 "Unicode Line Breaking Algorithm"|https://www.unicode.org/reports/tr14>. The regular expression construct provides default behavior, while the heavier-weight module provides customizable line breaking. But Perl treats C<\n> as the start- and end-line delimiter, whereas Unicode specifies more characters that should be so-interpreted. These are: VT U+000B (\v in C) FF U+000C (\f) CR U+000D (\r) NEL U+0085 LS U+2028 PS U+2029 C<^> and C<$> in regular expression patterns are supposed to match all these, but don't. These characters also don't, but should, affect C<< <> >> C<$.>, and script line numbers. Also, lines should not be split within C<CRLF> (i.e. there is no empty line between C<\r> and C<\n>). For C<CRLF>, try the C<:crlf> layer (see L<PerlIO>). =item [8] UTF-8/UTF-EBDDIC used in Perl allows not only C<U+10000> to C<U+10FFFF> but also beyond C<U+10FFFF> =back =head3 Level 2 - Extended Unicode Support RL2.1 Canonical Equivalents - Retracted [9] by Unicode RL2.2 Extended Grapheme Clusters and - Partial [10] Character Classes with Strings RL2.3 Default Word Boundaries - Done [11] RL2.4 Default Case Conversion - Done RL2.5 Name Properties - Done RL2.6 Wildcards in Property Values - Partial [12] RL2.7 Full Properties - Partial [13] RL2.8 Optional Properties - Partial [14] =over 4 =item [9] Unicode has rewritten this portion of UTS#18 to say that getting canonical equivalence (see UAX#15 L<"Unicode Normalization Forms"|https://www.unicode.org/reports/tr15>) is basically to be done at the programmer level. Use NFD to write both your regular expressions and text to match them against (you can use L<Unicode::Normalize>). =item [10] Perl has C<\X> and C<\b{gcb}>. Unicode has retracted their "Grapheme Cluster Mode", and recently added string properties, which Perl does not yet support. =item [11] see L<UAX#29 "Unicode Text Segmentation"|https://www.unicode.org/reports/tr29>, =item [12] see L</Wildcards in Property Values> above. =item [13] Perl supports all the properties in the Unicode Character Database (UCD). It does not yet support the listed properties that come from other Unicode sources. =item [14] The only optional property that Perl supports is Named Sequence. None of these properties are in the UCD. =back =head3 Level 3 - Tailored Support This has been retracted by Unicode. =head2 Unicode Encodings Unicode characters are assigned to I<code points>, which are abstract numbers. To use these numbers, various encodings are needed. =over 4 =item * UTF-8 UTF-8 is a variable-length (1 to 4 bytes), byte-order independent encoding. In most of Perl's documentation, including elsewhere in this document, the term "UTF-8" means also "UTF-EBCDIC". But in this section, "UTF-8" refers only to the encoding used on ASCII platforms. It is a superset of 7-bit US-ASCII, so anything encoded in ASCII has the identical representation when encoded in UTF-8. The following table is from Unicode 3.2. Code Points 1st Byte 2nd Byte 3rd Byte 4th Byte U+0000..U+007F 00..7F U+0080..U+07FF * C2..DF 80..BF U+0800..U+0FFF E0 * A0..BF 80..BF U+1000..U+CFFF E1..EC 80..BF 80..BF U+D000..U+D7FF ED 80..9F 80..BF U+D800..U+DFFF +++++ utf16 surrogates, not legal utf8 +++++ U+E000..U+FFFF EE..EF 80..BF 80..BF U+10000..U+3FFFF F0 * 90..BF 80..BF 80..BF U+40000..U+FFFFF F1..F3 80..BF 80..BF 80..BF U+100000..U+10FFFF F4 80..8F 80..BF 80..BF Note the gaps marked by "*" before several of the byte entries above. These are caused by legal UTF-8 avoiding non-shortest encodings: it is technically possible to UTF-8-encode a single code point in different ways, but that is explicitly forbidden, and the shortest possible encoding should always be used (and that is what Perl does). Another way to look at it is via bits: Code Points 1st Byte 2nd Byte 3rd Byte 4th Byte 0aaaaaaa 0aaaaaaa 00000bbbbbaaaaaa 110bbbbb 10aaaaaa ccccbbbbbbaaaaaa 1110cccc 10bbbbbb 10aaaaaa 00000dddccccccbbbbbbaaaaaa 11110ddd 10cccccc 10bbbbbb 10aaaaaa As you can see, the continuation bytes all begin with C<"10">, and the leading bits of the start byte tell how many bytes there are in the encoded character. The original UTF-8 specification allowed up to 6 bytes, to allow encoding of numbers up to C<0x7FFF_FFFF>. Perl continues to allow those, and has extended that up to 13 bytes to encode code points up to what can fit in a 64-bit word. However, Perl will warn if you output any of these as being non-portable; and under strict UTF-8 input protocols, they are forbidden. In addition, it is now illegal to use a code point larger than what a signed integer variable on your system can hold. On 32-bit ASCII systems, this means C<0x7FFF_FFFF> is the legal maximum (much higher on 64-bit systems). =item * UTF-EBCDIC Like UTF-8, but EBCDIC-safe, in the way that UTF-8 is ASCII-safe. This means that all the basic characters (which includes all those that have ASCII equivalents (like C<"A">, C<"0">, C<"%">, I<etc.>) are the same in both EBCDIC and UTF-EBCDIC.) UTF-EBCDIC is used on EBCDIC platforms. It generally requires more bytes to represent a given code point than UTF-8 does; the largest Unicode code points take 5 bytes to represent (instead of 4 in UTF-8), and, extended for 64-bit words, it uses 14 bytes instead of 13 bytes in UTF-8. =item * UTF-16, UTF-16BE, UTF-16LE, Surrogates, and C<BOM>'s (Byte Order Marks) The followings items are mostly for reference and general Unicode knowledge, Perl doesn't use these constructs internally. Like UTF-8, UTF-16 is a variable-width encoding, but where UTF-8 uses 8-bit code units, UTF-16 uses 16-bit code units. All code points occupy either 2 or 4 bytes in UTF-16: code points C<U+0000..U+FFFF> are stored in a single 16-bit unit, and code points C<U+10000..U+10FFFF> in two 16-bit units. The latter case is using I<surrogates>, the first 16-bit unit being the I<high surrogate>, and the second being the I<low surrogate>. Surrogates are code points set aside to encode the C<U+10000..U+10FFFF> range of Unicode code points in pairs of 16-bit units. The I<high surrogates> are the range C<U+D800..U+DBFF> and the I<low surrogates> are the range C<U+DC00..U+DFFF>. The surrogate encoding is $hi = ($uni - 0x10000) / 0x400 + 0xD800; $lo = ($uni - 0x10000) % 0x400 + 0xDC00; and the decoding is $uni = 0x10000 + ($hi - 0xD800) * 0x400 + ($lo - 0xDC00); Because of the 16-bitness, UTF-16 is byte-order dependent. UTF-16 itself can be used for in-memory computations, but if storage or transfer is required either UTF-16BE (big-endian) or UTF-16LE (little-endian) encodings must be chosen. This introduces another problem: what if you just know that your data is UTF-16, but you don't know which endianness? Byte Order Marks, or C<BOM>'s, are a solution to this. A special character has been reserved in Unicode to function as a byte order marker: the character with the code point C<U+FEFF> is the C<BOM>. The trick is that if you read a C<BOM>, you will know the byte order, since if it was written on a big-endian platform, you will read the bytes C<0xFE 0xFF>, but if it was written on a little-endian platform, you will read the bytes C<0xFF 0xFE>. (And if the originating platform was writing in ASCII platform UTF-8, you will read the bytes C<0xEF 0xBB 0xBF>.) The way this trick works is that the character with the code point C<U+FFFE> is not supposed to be in input streams, so the sequence of bytes C<0xFF 0xFE> is unambiguously "C<BOM>, represented in little-endian format" and cannot be C<U+FFFE>, represented in big-endian format". Surrogates have no meaning in Unicode outside their use in pairs to represent other code points. However, Perl allows them to be represented individually internally, for example by saying C<chr(0xD801)>, so that all code points, not just those valid for open interchange, are representable. Unicode does define semantics for them, such as their C<L</General_Category>> is C<"Cs">. But because their use is somewhat dangerous, Perl will warn (using the warning category C<"surrogate">, which is a sub-category of C<"utf8">) if an attempt is made to do things like take the lower case of one, or match case-insensitively, or to output them. (But don't try this on Perls before 5.14.) =item * UTF-32, UTF-32BE, UTF-32LE The UTF-32 family is pretty much like the UTF-16 family, except that the units are 32-bit, and therefore the surrogate scheme is not needed. UTF-32 is a fixed-width encoding. The C<BOM> signatures are C<0x00 0x00 0xFE 0xFF> for BE and C<0xFF 0xFE 0x00 0x00> for LE. =item * UCS-2, UCS-4 Legacy, fixed-width encodings defined by the ISO 10646 standard. UCS-2 is a 16-bit encoding. Unlike UTF-16, UCS-2 is not extensible beyond C<U+FFFF>, because it does not use surrogates. UCS-4 is a 32-bit encoding, functionally identical to UTF-32 (the difference being that UCS-4 forbids neither surrogates nor code points larger than C<0x10_FFFF>). =item * UTF-7 A seven-bit safe (non-eight-bit) encoding, which is useful if the transport or storage is not eight-bit safe. Defined by RFC 2152. =back =head2 Noncharacter code points 66 code points are set aside in Unicode as "noncharacter code points". These all have the C<Unassigned> (C<Cn>) C<L</General_Category>>, and no character will ever be assigned to any of them. They are the 32 code points between C<U+FDD0> and C<U+FDEF> inclusive, and the 34 code points: U+FFFE U+FFFF U+1FFFE U+1FFFF U+2FFFE U+2FFFF ... U+EFFFE U+EFFFF U+FFFFE U+FFFFF U+10FFFE U+10FFFF Until Unicode 7.0, the noncharacters were "B<forbidden> for use in open interchange of Unicode text data", so that code that processed those streams could use these code points as sentinels that could be mixed in with character data, and would always be distinguishable from that data. (Emphasis above and in the next paragraph are added in this document.) Unicode 7.0 changed the wording so that they are "B<not recommended> for use in open interchange of Unicode text data". The 7.0 Standard goes on to say: =over 4 "If a noncharacter is received in open interchange, an application is not required to interpret it in any way. It is good practice, however, to recognize it as a noncharacter and to take appropriate action, such as replacing it with C<U+FFFD> replacement character, to indicate the problem in the text. It is not recommended to simply delete noncharacter code points from such text, because of the potential security issues caused by deleting uninterpreted characters. (See conformance clause C7 in Section 3.2, Conformance Requirements, and L<Unicode Technical Report #36, "Unicode Security Considerations"|https://www.unicode.org/reports/tr36/#Substituting_for_Ill_Formed_Subsequences>)." =back This change was made because it was found that various commercial tools like editors, or for things like source code control, had been written so that they would not handle program files that used these code points, effectively precluding their use almost entirely! And that was never the intent. They've always been meant to be usable within an application, or cooperating set of applications, at will. If you're writing code, such as an editor, that is supposed to be able to handle any Unicode text data, then you shouldn't be using these code points yourself, and instead allow them in the input. If you need sentinels, they should instead be something that isn't legal Unicode. For UTF-8 data, you can use the bytes 0xC1 and 0xC2 as sentinels, as they never appear in well-formed UTF-8. (There are equivalents for UTF-EBCDIC). You can also store your Unicode code points in integer variables and use negative values as sentinels. If you're not writing such a tool, then whether you accept noncharacters as input is up to you (though the Standard recommends that you not). If you do strict input stream checking with Perl, these code points continue to be forbidden. This is to maintain backward compatibility (otherwise potential security holes could open up, as an unsuspecting application that was written assuming the noncharacters would be filtered out before getting to it, could now, without warning, start getting them). To do strict checking, you can use the layer C<:encoding('UTF-8')>. Perl continues to warn (using the warning category C<"nonchar">, which is a sub-category of C<"utf8">) if an attempt is made to output noncharacters. =head2 Beyond Unicode code points The maximum Unicode code point is C<U+10FFFF>, and Unicode only defines operations on code points up through that. But Perl works on code points up to the maximum permissible signed number available on the platform. However, Perl will not accept these from input streams unless lax rules are being used, and will warn (using the warning category C<"non_unicode">, which is a sub-category of C<"utf8">) if any are output. Since Unicode rules are not defined on these code points, if a Unicode-defined operation is done on them, Perl uses what we believe are sensible rules, while generally warning, using the C<"non_unicode"> category. For example, C<uc("\x{11_0000}")> will generate such a warning, returning the input parameter as its result, since Perl defines the uppercase of every non-Unicode code point to be the code point itself. (All the case changing operations, not just uppercasing, work this way.) The situation with matching Unicode properties in regular expressions, the C<\p{}> and C<\P{}> constructs, against these code points is not as clear cut, and how these are handled has changed as we've gained experience. One possibility is to treat any match against these code points as undefined. But since Perl doesn't have the concept of a match being undefined, it converts this to failing or C<FALSE>. This is almost, but not quite, what Perl did from v5.14 (when use of these code points became generally reliable) through v5.18. The difference is that Perl treated all C<\p{}> matches as failing, but all C<\P{}> matches as succeeding. One problem with this is that it leads to unexpected, and confusing results in some cases: chr(0x110000) =~ \p{ASCII_Hex_Digit=True} # Failed on <= v5.18 chr(0x110000) =~ \p{ASCII_Hex_Digit=False} # Failed! on <= v5.18 That is, it treated both matches as undefined, and converted that to false (raising a warning on each). The first case is the expected result, but the second is likely counterintuitive: "How could both be false when they are complements?" Another problem was that the implementation optimized many Unicode property matches down to already existing simpler, faster operations, which don't raise the warning. We chose to not forgo those optimizations, which help the vast majority of matches, just to generate a warning for the unlikely event that an above-Unicode code point is being matched against. As a result of these problems, starting in v5.20, what Perl does is to treat non-Unicode code points as just typical unassigned Unicode characters, and matches accordingly. (Note: Unicode has atypical unassigned code points. For example, it has noncharacter code points, and ones that, when they do get assigned, are destined to be written Right-to-left, as Arabic and Hebrew are. Perl assumes that no non-Unicode code point has any atypical properties.) Perl, in most cases, will raise a warning when matching an above-Unicode code point against a Unicode property when the result is C<TRUE> for C<\p{}>, and C<FALSE> for C<\P{}>. For example: chr(0x110000) =~ \p{ASCII_Hex_Digit=True} # Fails, no warning chr(0x110000) =~ \p{ASCII_Hex_Digit=False} # Succeeds, with warning In both these examples, the character being matched is non-Unicode, so Unicode doesn't define how it should match. It clearly isn't an ASCII hex digit, so the first example clearly should fail, and so it does, with no warning. But it is arguable that the second example should have an undefined, hence C<FALSE>, result. So a warning is raised for it. Thus the warning is raised for many fewer cases than in earlier Perls, and only when what the result is could be arguable. It turns out that none of the optimizations made by Perl (or are ever likely to be made) cause the warning to be skipped, so it solves both problems of Perl's earlier approach. The most commonly used property that is affected by this change is C<\p{Unassigned}> which is a short form for C<\p{General_Category=Unassigned}>. Starting in v5.20, all non-Unicode code points are considered C<Unassigned>. In earlier releases the matches failed because the result was considered undefined. The only place where the warning is not raised when it might ought to have been is if optimizations cause the whole pattern match to not even be attempted. For example, Perl may figure out that for a string to match a certain regular expression pattern, the string has to contain the substring C<"foobar">. Before attempting the match, Perl may look for that substring, and if not found, immediately fail the match without actually trying it; so no warning gets generated even if the string contains an above-Unicode code point. This behavior is more "Do what I mean" than in earlier Perls for most applications. But it catches fewer issues for code that needs to be strictly Unicode compliant. Therefore there is an additional mode of operation available to accommodate such code. This mode is enabled if a regular expression pattern is compiled within the lexical scope where the C<"non_unicode"> warning class has been made fatal, say by: use warnings FATAL => "non_unicode" (see L<warnings>). In this mode of operation, Perl will raise the warning for all matches against a non-Unicode code point (not just the arguable ones), and it skips the optimizations that might cause the warning to not be output. (It currently still won't warn if the match isn't even attempted, like in the C<"foobar"> example above.) In summary, Perl now normally treats non-Unicode code points as typical Unicode unassigned code points for regular expression matches, raising a warning only when it is arguable what the result should be. However, if this warning has been made fatal, it isn't skipped. There is one exception to all this. C<\p{All}> looks like a Unicode property, but it is a Perl extension that is defined to be true for all possible code points, Unicode or not, so no warning is ever generated when matching this against a non-Unicode code point. (Prior to v5.20, it was an exact synonym for C<\p{Any}>, matching code points C<0> through C<0x10FFFF>.) =head2 Security Implications of Unicode First, read L<Unicode Security Considerations|https://www.unicode.org/reports/tr36>. Also, note the following: =over 4 =item * Malformed UTF-8 UTF-8 is very structured, so many combinations of bytes are invalid. In the past, Perl tried to soldier on and make some sense of invalid combinations, but this can lead to security holes, so now, if the Perl core needs to process an invalid combination, it will either raise a fatal error, or will replace those bytes by the sequence that forms the Unicode REPLACEMENT CHARACTER, for which purpose Unicode created it. Every code point can be represented by more than one possible syntactically valid UTF-8 sequence. Early on, both Unicode and Perl considered any of these to be valid, but now, all sequences longer than the shortest possible one are considered to be malformed. Unicode considers many code points to be illegal, or to be avoided. Perl generally accepts them, once they have passed through any input filters that may try to exclude them. These have been discussed above (see "Surrogates" under UTF-16 in L</Unicode Encodings>, L</Noncharacter code points>, and L</Beyond Unicode code points>). =item * Regular expression pattern matching may surprise you if you're not accustomed to Unicode. Starting in Perl 5.14, several pattern modifiers are available to control this, called the character set modifiers. Details are given in L<perlre/Character set modifiers>. =back As discussed elsewhere, Perl has one foot (two hooves?) planted in each of two worlds: the old world of ASCII and single-byte locales, and the new world of Unicode, upgrading when necessary. If your legacy code does not explicitly use Unicode, no automatic switch-over to Unicode should happen. =head2 Unicode in Perl on EBCDIC Unicode is supported on EBCDIC platforms. See L<perlebcdic>. Unless ASCII vs. EBCDIC issues are specifically being discussed, references to UTF-8 encoding in this document and elsewhere should be read as meaning UTF-EBCDIC on EBCDIC platforms. See L<perlebcdic/Unicode and UTF>. Because UTF-EBCDIC is so similar to UTF-8, the differences are mostly hidden from you; S<C<use utf8>> (and NOT something like S<C<use utfebcdic>>) declares the script is in the platform's "native" 8-bit encoding of Unicode. (Similarly for the C<":utf8"> layer.) =head2 Locales See L<perllocale/Unicode and UTF-8> =head2 When Unicode Does Not Happen There are still many places where Unicode (in some encoding or another) could be given as arguments or received as results, or both in Perl, but it is not, in spite of Perl having extensive ways to input and output in Unicode, and a few other "entry points" like the C<@ARGV> array (which can sometimes be interpreted as UTF-8). The following are such interfaces. Also, see L</The "Unicode Bug">. For all of these interfaces Perl currently (as of v5.16.0) simply assumes byte strings both as arguments and results, or UTF-8 strings if the (deprecated) C<encoding> pragma has been used. One reason that Perl does not attempt to resolve the role of Unicode in these situations is that the answers are highly dependent on the operating system and the file system(s). For example, whether filenames can be in Unicode and in exactly what kind of encoding, is not exactly a portable concept. Similarly for C<qx> and C<system>: how well will the "command-line interface" (and which of them?) handle Unicode? =over 4 =item * C<chdir>, C<chmod>, C<chown>, C<chroot>, C<exec>, C<link>, C<lstat>, C<mkdir>, C<rename>, C<rmdir>, C<stat>, C<symlink>, C<truncate>, C<unlink>, C<utime>, C<-X> =item * C<%ENV> =item * C<glob> (aka the C<E<lt>*E<gt>>) =item * C<open>, C<opendir>, C<sysopen> =item * C<qx> (aka the backtick operator), C<system> =item * C<readdir>, C<readlink> =back =head2 The "Unicode Bug" The term, "Unicode bug" has been applied to an inconsistency with the code points in the C<Latin-1 Supplement> block, that is, between 128 and 255. Without a locale specified, unlike all other characters or code points, these characters can have very different semantics depending on the rules in effect. (Characters whose code points are above 255 force Unicode rules; whereas the rules for ASCII characters are the same under both ASCII and Unicode rules.) Under Unicode rules, these upper-Latin1 characters are interpreted as Unicode code points, which means they have the same semantics as Latin-1 (ISO-8859-1) and C1 controls. As explained in L</ASCII Rules versus Unicode Rules>, under ASCII rules, they are considered to be unassigned characters. This can lead to unexpected results. For example, a string's semantics can suddenly change if a code point above 255 is appended to it, which changes the rules from ASCII to Unicode. As an example, consider the following program and its output: $ perl -le' no feature "unicode_strings"; $s1 = "\xC2"; $s2 = "\x{2660}"; for ($s1, $s2, $s1.$s2) { print /\w/ || 0; } ' 0 0 1 If there's no C<\w> in C<s1> nor in C<s2>, why does their concatenation have one? This anomaly stems from Perl's attempt to not disturb older programs that didn't use Unicode, along with Perl's desire to add Unicode support seamlessly. But the result turned out to not be seamless. (By the way, you can choose to be warned when things like this happen. See C<L<encoding::warnings>>.) L<S<C<use feature 'unicode_strings'>>|feature/The 'unicode_strings' feature> was added, starting in Perl v5.12, to address this problem. It affects these things: =over 4 =item * Changing the case of a scalar, that is, using C<uc()>, C<ucfirst()>, C<lc()>, and C<lcfirst()>, or C<\L>, C<\U>, C<\u> and C<\l> in double-quotish contexts, such as regular expression substitutions. Under C<unicode_strings> starting in Perl 5.12.0, Unicode rules are generally used. See L<perlfunc/lc> for details on how this works in combination with various other pragmas. =item * Using caseless (C</i>) regular expression matching. Starting in Perl 5.14.0, regular expressions compiled within the scope of C<unicode_strings> use Unicode rules even when executed or compiled into larger regular expressions outside the scope. =item * Matching any of several properties in regular expressions. These properties are C<\b> (without braces), C<\B> (without braces), C<\s>, C<\S>, C<\w>, C<\W>, and all the Posix character classes I<except> C<[[:ascii:]]>. Starting in Perl 5.14.0, regular expressions compiled within the scope of C<unicode_strings> use Unicode rules even when executed or compiled into larger regular expressions outside the scope. =item * In C<quotemeta> or its inline equivalent C<\Q>. Starting in Perl 5.16.0, consistent quoting rules are used within the scope of C<unicode_strings>, as described in L<perlfunc/quotemeta>. Prior to that, or outside its scope, no code points above 127 are quoted in UTF-8 encoded strings, but in byte encoded strings, code points between 128-255 are always quoted. =item * In the C<..> or L<range|perlop/Range Operators> operator. Starting in Perl 5.26.0, the range operator on strings treats their lengths consistently within the scope of C<unicode_strings>. Prior to that, or outside its scope, it could produce strings whose length in characters exceeded that of the right-hand side, where the right-hand side took up more bytes than the correct range endpoint. =item * In L<< C<split>'s special-case whitespace splitting|perlfunc/split >>. Starting in Perl 5.28.0, the C<split> function with a pattern specified as a string containing a single space handles whitespace characters consistently within the scope of C<unicode_strings>. Prior to that, or outside its scope, characters that are whitespace according to Unicode rules but not according to ASCII rules were treated as field contents rather than field separators when they appear in byte-encoded strings. =back You can see from the above that the effect of C<unicode_strings> increased over several Perl releases. (And Perl's support for Unicode continues to improve; it's best to use the latest available release in order to get the most complete and accurate results possible.) Note that C<unicode_strings> is automatically chosen if you S<C<use 5.012>> or higher. For Perls earlier than those described above, or when a string is passed to a function outside the scope of C<unicode_strings>, see the next section. =head2 Forcing Unicode in Perl (Or Unforcing Unicode in Perl) Sometimes (see L</"When Unicode Does Not Happen"> or L</The "Unicode Bug">) there are situations where you simply need to force a byte string into UTF-8, or vice versa. The standard module L<Encode> can be used for this, or the low-level calls L<C<utf8::upgrade($bytestring)>|utf8/Utility functions> and L<C<utf8::downgrade($utf8string[, FAIL_OK])>|utf8/Utility functions>. Note that C<utf8::downgrade()> can fail if the string contains characters that don't fit into a byte. Calling either function on a string that already is in the desired state is a no-op. L</ASCII Rules versus Unicode Rules> gives all the ways that a string is made to use Unicode rules. =head2 Using Unicode in XS See L<perlguts/"Unicode Support"> for an introduction to Unicode at the XS level, and L<perlapi/Unicode Support> for the API details. =head2 Hacking Perl to work on earlier Unicode versions (for very serious hackers only) Perl by default comes with the latest supported Unicode version built-in, but the goal is to allow you to change to use any earlier one. In Perls v5.20 and v5.22, however, the earliest usable version is Unicode 5.1. Perl v5.18 and v5.24 are able to handle all earlier versions. Download the files in the desired version of Unicode from the Unicode web site L<https://www.unicode.org>). These should replace the existing files in F<lib/unicore> in the Perl source tree. Follow the instructions in F<README.perl> in that directory to change some of their names, and then build perl (see L<INSTALL>). =head2 Porting code from perl-5.6.X Perls starting in 5.8 have a different Unicode model from 5.6. In 5.6 the programmer was required to use the C<utf8> pragma to declare that a given scope expected to deal with Unicode data and had to make sure that only Unicode data were reaching that scope. If you have code that is working with 5.6, you will need some of the following adjustments to your code. The examples are written such that the code will continue to work under 5.6, so you should be safe to try them out. =over 3 =item * A filehandle that should read or write UTF-8 if ($] > 5.008) { binmode $fh, ":encoding(UTF-8)"; } =item * A scalar that is going to be passed to some extension Be it C<Compress::Zlib>, C<Apache::Request> or any extension that has no mention of Unicode in the manpage, you need to make sure that the UTF8 flag is stripped off. Note that at the time of this writing (January 2012) the mentioned modules are not UTF-8-aware. Please check the documentation to verify if this is still true. if ($] > 5.008) { require Encode; $val = Encode::encode("UTF-8", $val); # make octets } =item * A scalar we got back from an extension If you believe the scalar comes back as UTF-8, you will most likely want the UTF8 flag restored: if ($] > 5.008) { require Encode; $val = Encode::decode("UTF-8", $val); } =item * Same thing, if you are really sure it is UTF-8 if ($] > 5.008) { require Encode; Encode::_utf8_on($val); } =item * A wrapper for L<DBI> C<fetchrow_array> and C<fetchrow_hashref> When the database contains only UTF-8, a wrapper function or method is a convenient way to replace all your C<fetchrow_array> and C<fetchrow_hashref> calls. A wrapper function will also make it easier to adapt to future enhancements in your database driver. Note that at the time of this writing (January 2012), the DBI has no standardized way to deal with UTF-8 data. Please check the L<DBI documentation|DBI> to verify if that is still true. sub fetchrow { # $what is one of fetchrow_{array,hashref} my($self, $sth, $what) = @_; if ($] < 5.008) { return $sth->$what; } else { require Encode; if (wantarray) { my @arr = $sth->$what; for (@arr) { defined && /[^\000-\177]/ && Encode::_utf8_on($_); } return @arr; } else { my $ret = $sth->$what; if (ref $ret) { for my $k (keys %$ret) { defined && /[^\000-\177]/ && Encode::_utf8_on($_) for $ret->{$k}; } return $ret; } else { defined && /[^\000-\177]/ && Encode::_utf8_on($_) for $ret; return $ret; } } } } =item * A large scalar that you know can only contain ASCII Scalars that contain only ASCII and are marked as UTF-8 are sometimes a drag to your program. If you recognize such a situation, just remove the UTF8 flag: utf8::downgrade($val) if $] > 5.008; =back =head1 BUGS See also L</The "Unicode Bug"> above. =head2 Interaction with Extensions When Perl exchanges data with an extension, the extension should be able to understand the UTF8 flag and act accordingly. If the extension doesn't recognize that flag, it's likely that the extension will return incorrectly-flagged data. So if you're working with Unicode data, consult the documentation of every module you're using if there are any issues with Unicode data exchange. If the documentation does not talk about Unicode at all, suspect the worst and probably look at the source to learn how the module is implemented. Modules written completely in Perl shouldn't cause problems. Modules that directly or indirectly access code written in other programming languages are at risk. For affected functions, the simple strategy to avoid data corruption is to always make the encoding of the exchanged data explicit. Choose an encoding that you know the extension can handle. Convert arguments passed to the extensions to that encoding and convert results back from that encoding. Write wrapper functions that do the conversions for you, so you can later change the functions when the extension catches up. To provide an example, let's say the popular C<Foo::Bar::escape_html> function doesn't deal with Unicode data yet. The wrapper function would convert the argument to raw UTF-8 and convert the result back to Perl's internal representation like so: sub my_escape_html ($) { my($what) = shift; return unless defined $what; Encode::decode("UTF-8", Foo::Bar::escape_html( Encode::encode("UTF-8", $what))); } Sometimes, when the extension does not convert data but just stores and retrieves it, you will be able to use the otherwise dangerous L<C<Encode::_utf8_on()>|Encode/_utf8_on> function. Let's say the popular C<Foo::Bar> extension, written in C, provides a C<param> method that lets you store and retrieve data according to these prototypes: $self->param($name, $value); # set a scalar $value = $self->param($name); # retrieve a scalar If it does not yet provide support for any encoding, one could write a derived class with such a C<param> method: sub param { my($self,$name,$value) = @_; utf8::upgrade($name); # make sure it is UTF-8 encoded if (defined $value) { utf8::upgrade($value); # make sure it is UTF-8 encoded return $self->SUPER::param($name,$value); } else { my $ret = $self->SUPER::param($name); Encode::_utf8_on($ret); # we know, it is UTF-8 encoded return $ret; } } Some extensions provide filters on data entry/exit points, such as C<DB_File::filter_store_key> and family. Look out for such filters in the documentation of your extensions; they can make the transition to Unicode data much easier. =head2 Speed Some functions are slower when working on UTF-8 encoded strings than on byte encoded strings. All functions that need to hop over characters such as C<length()>, C<substr()> or C<index()>, or matching regular expressions can work B<much> faster when the underlying data are byte-encoded. In Perl 5.8.0 the slowness was often quite spectacular; in Perl 5.8.1 a caching scheme was introduced which improved the situation. In general, operations with UTF-8 encoded strings are still slower. As an example, the Unicode properties (character classes) like C<\p{Nd}> are known to be quite a bit slower (5-20 times) than their simpler counterparts like C<[0-9]> (then again, there are hundreds of Unicode characters matching C<Nd> compared with the 10 ASCII characters matching C<[0-9]>). =head1 SEE ALSO L<perlunitut>, L<perluniintro>, L<perluniprops>, L<Encode>, L<open>, L<utf8>, L<bytes>, L<perlretut>, L<perlvar/"${^UNICODE}">, L<https://www.unicode.org/reports/tr44>). =cut perltw.pod 0000644 00000010557 15125556335 0006607 0 ustar 00 =encoding utf8 如果你用一般的文字編輯器閱覽這份文件, 請忽略文中奇特的註記字符. 這份文件是以 POD (簡明文件格式) 寫成; 這種格式是為了能讓人直接讀取, 而特別設計的. 關於此格式的進一步資訊, 請參考 perlpod 線上文件. =head1 NAME perltw - 正體中文 Perl 指南 =head1 DESCRIPTION 歡迎來到 Perl 的天地! 從 5.8.0 版開始, Perl 具備了完善的 Unicode (萬國碼) 支援, 也連帶支援了許多拉丁語系以外的編碼方式; CJK (中日韓) 便是其中的一部份. Unicode 是國際性的標準, 試圖涵蓋世界上所有的字符: 西方世界, 東方世界, 以及兩者間的一切 (希臘文, 敘利亞文, 阿拉伯文, 希伯來文, 印度文, 印地安文, 等等). 它也容納了多種作業系統與平臺 (如 PC 及麥金塔). Perl 本身以 Unicode 進行操作. 這表示 Perl 內部的字串資料可用 Unicode 表示; Perl 的函式與算符 (例如正規表示式比對) 也能對 Unicode 進行操作. 在輸入及輸出時, 為了處理以 Unicode 之前的編碼方式儲存的資料, Perl 提供了 Encode 這個模組, 可以讓你輕易地讀取及寫入舊有的編碼資料. Encode 延伸模組支援下列正體中文的編碼方式 ('big5' 表示 'big5-eten'): big5-eten Big5 編碼 (含倚天延伸字形) big5-hkscs Big5 + 香港外字集, 2001 年版 cp950 字碼頁 950 (Big5 + 微軟添加的字符) 舉例來說, 將 Big5 編碼的檔案轉成 Unicode, 祗需鍵入下列指令: perl -MEncode -pe '$_= encode( utf8 => decode( big5 => $_ ) )' \ < file.big5 > file.utf8 Perl 也內附了 "piconv", 一支完全以 Perl 寫成的字符轉換工具程式, 用法如下: piconv -f big5 -t utf8 < file.big5 > file.utf8 piconv -f utf8 -t big5 < file.utf8 > file.big5 另外，若程式碼本身以 utf8 編碼儲存，配合使用 utf8 模組，可讓程式碼中字串以及其運 算皆以字符為單位，而不以位元為單位，如下所示： #!/usr/bin/env perl use utf8; print length("駱駝"); # 2 (不是 6) print index("諄諄教誨", "教誨"); # 2 (從 0 起算第 2 個字符) =head2 額外的中文編碼 如果需要更多的中文編碼, 可以從 CPAN (L<https://www.cpan.org/>) 下載 Encode::HanExtra 模組. 它目前提供下列編碼方式: cccii 1980 年文建會的中文資訊交換碼 euc-tw Unix 延伸字符集, 包含 CNS11643 平面 1-7 big5plus 中文數位化技術推廣基金會的 Big5+ big5ext 中文數位化技術推廣基金會的 Big5e 另外, Encode::HanConvert 模組則提供了簡繁轉換用的兩種編碼: big5-simp Big5 正體中文與 Unicode 簡體中文互轉 gbk-trad GBK 簡體中文與 Unicode 正體中文互轉 若想在 GBK 與 Big5 之間互轉, 請參考該模組內附的 b2g.pl 與 g2b.pl 兩支程式, 或在程式內使用下列寫法: use Encode::HanConvert; $euc_cn = big5_to_gb($big5); # 從 Big5 轉為 GBK $big5 = gb_to_big5($euc_cn); # 從 GBK 轉為 Big5 =head2 進一步的資訊 請參考 Perl 內附的大量說明文件 (不幸全是用英文寫的), 來學習更多關於 Perl 的知識, 以及 Unicode 的使用方式. 不過, 外部的資源相當豐富: =head2 提供 Perl 資源的網址 =over 4 =item L<https://www.perl.org/> Perl 的首頁 =item L<https://www.perl.com/> 由 Perl 基金會所營運的文章輯錄 =item L<https://www.cpan.org/> Perl 綜合典藏網 (Comprehensive Perl Archive Network) =item L<https://lists.perl.org/> Perl 郵遞論壇一覽 =back =head2 學習 Perl 的網址 =over 4 =item L<http://www.oreilly.com.tw/product_perl.php?id=index_perl> 正體中文版的歐萊禮 Perl 書藉 =back =head2 Perl 使用者集會 =over 4 =item L<https://www.pm.org/groups/taiwan.html> 臺灣 Perl 推廣組一覽 =item L<irc://irc.freenode.org/#perl.tw> Perl.tw 線上聊天室 =back =head2 Unicode 相關網址 =over 4 =item L<https://www.unicode.org/> Unicode 學術學會 (Unicode 標準的制定者) =item L<http://www.cl.cam.ac.uk/%7Emgk25/unicode.html> Unix/Linux 上的 UTF-8 及 Unicode 答客問 =back =head2 中文化資訊 =over 4 =item 中文化軟體聯盟 L<http://www.cpatch.org/> =back =head1 SEE ALSO L<Encode>, L<Encode::TW>, L<perluniintro>, L<perlunicode> =head1 AUTHORS Jarkko Hietaniemi E<lt>jhi@iki.fiE<gt> Audrey Tang (唐鳳) E<lt>audreyt@audreyt.orgE<gt> =cut perlintro.pod 0000644 00000053167 15125556335 0007314 0 ustar 00 =head1 NAME perlintro -- a brief introduction and overview of Perl =head1 DESCRIPTION This document is intended to give you a quick overview of the Perl programming language, along with pointers to further documentation. It is intended as a "bootstrap" guide for those who are new to the language, and provides just enough information for you to be able to read other peoples' Perl and understand roughly what it's doing, or write your own simple scripts. This introductory document does not aim to be complete. It does not even aim to be entirely accurate. In some cases perfection has been sacrificed in the goal of getting the general idea across. You are I<strongly> advised to follow this introduction with more information from the full Perl manual, the table of contents to which can be found in L<perltoc>. Throughout this document you'll see references to other parts of the Perl documentation. You can read that documentation using the C<perldoc> command or whatever method you're using to read this document. Throughout Perl's documentation, you'll find numerous examples intended to help explain the discussed features. Please keep in mind that many of them are code fragments rather than complete programs. These examples often reflect the style and preference of the author of that piece of the documentation, and may be briefer than a corresponding line of code in a real program. Except where otherwise noted, you should assume that C<use strict> and C<use warnings> statements appear earlier in the "program", and that any variables used have already been declared, even if those declarations have been omitted to make the example easier to read. Do note that the examples have been written by many different authors over a period of several decades. Styles and techniques will therefore differ, although some effort has been made to not vary styles too widely in the same sections. Do not consider one style to be better than others - "There's More Than One Way To Do It" is one of Perl's mottos. After all, in your journey as a programmer, you are likely to encounter different styles. =head2 What is Perl? Perl is a general-purpose programming language originally developed for text manipulation and now used for a wide range of tasks including system administration, web development, network programming, GUI development, and more. The language is intended to be practical (easy to use, efficient, complete) rather than beautiful (tiny, elegant, minimal). Its major features are that it's easy to use, supports both procedural and object-oriented (OO) programming, has powerful built-in support for text processing, and has one of the world's most impressive collections of third-party modules. Different definitions of Perl are given in L<perl>, L<perlfaq1> and no doubt other places. From this we can determine that Perl is different things to different people, but that lots of people think it's at least worth writing about. =head2 Running Perl programs To run a Perl program from the Unix command line: perl progname.pl Alternatively, put this as the first line of your script: #!/usr/bin/env perl ... and run the script as F</path/to/script.pl>. Of course, it'll need to be executable first, so C<chmod 755 script.pl> (under Unix). (This start line assumes you have the B<env> program. You can also put directly the path to your perl executable, like in C<#!/usr/bin/perl>). For more information, including instructions for other platforms such as Windows and Mac OS, read L<perlrun>. =head2 Safety net Perl by default is very forgiving. In order to make it more robust it is recommended to start every program with the following lines: #!/usr/bin/perl use strict; use warnings; The two additional lines request from perl to catch various common problems in your code. They check different things so you need both. A potential problem caught by C<use strict;> will cause your code to stop immediately when it is encountered, while C<use warnings;> will merely give a warning (like the command-line switch B<-w>) and let your code run. To read more about them check their respective manual pages at L<strict> and L<warnings>. =head2 Basic syntax overview A Perl script or program consists of one or more statements. These statements are simply written in the script in a straightforward fashion. There is no need to have a C<main()> function or anything of that kind. Perl statements end in a semi-colon: print "Hello, world"; Comments start with a hash symbol and run to the end of the line # This is a comment Whitespace is irrelevant: print "Hello, world" ; ... except inside quoted strings: # this would print with a linebreak in the middle print "Hello world"; Double quotes or single quotes may be used around literal strings: print "Hello, world"; print 'Hello, world'; However, only double quotes "interpolate" variables and special characters such as newlines (C<\n>): print "Hello, $name\n"; # works fine print 'Hello, $name\n'; # prints $name\n literally Numbers don't need quotes around them: print 42; You can use parentheses for functions' arguments or omit them according to your personal taste. They are only required occasionally to clarify issues of precedence. print("Hello, world\n"); print "Hello, world\n"; More detailed information about Perl syntax can be found in L<perlsyn>. =head2 Perl variable types Perl has three main variable types: scalars, arrays, and hashes. =over 4 =item Scalars A scalar represents a single value: my $animal = "camel"; my $answer = 42; Scalar values can be strings, integers or floating point numbers, and Perl will automatically convert between them as required. There is no need to pre-declare your variable types, but you have to declare them using the C<my> keyword the first time you use them. (This is one of the requirements of C<use strict;>.) Scalar values can be used in various ways: print $animal; print "The animal is $animal\n"; print "The square of $answer is ", $answer * $answer, "\n"; There are a number of "magic" scalars with names that look like punctuation or line noise. These special variables are used for all kinds of purposes, and are documented in L<perlvar>. The only one you need to know about for now is C<$_> which is the "default variable". It's used as the default argument to a number of functions in Perl, and it's set implicitly by certain looping constructs. print; # prints contents of $_ by default =item Arrays An array represents a list of values: my @animals = ("camel", "llama", "owl"); my @numbers = (23, 42, 69); my @mixed = ("camel", 42, 1.23); Arrays are zero-indexed. Here's how you get at elements in an array: print $animals[0]; # prints "camel" print $animals[1]; # prints "llama" The special variable C<$#array> tells you the index of the last element of an array: print $mixed[$#mixed]; # last element, prints 1.23 You might be tempted to use C<$#array + 1> to tell you how many items there are in an array. Don't bother. As it happens, using C<@array> where Perl expects to find a scalar value ("in scalar context") will give you the number of elements in the array: if (@animals < 5) { ... } The elements we're getting from the array start with a C<$> because we're getting just a single value out of the array; you ask for a scalar, you get a scalar. To get multiple values from an array: @animals[0,1]; # gives ("camel", "llama"); @animals[0..2]; # gives ("camel", "llama", "owl"); @animals[1..$#animals]; # gives all except the first element This is called an "array slice". You can do various useful things to lists: my @sorted = sort @animals; my @backwards = reverse @numbers; There are a couple of special arrays too, such as C<@ARGV> (the command line arguments to your script) and C<@_> (the arguments passed to a subroutine). These are documented in L<perlvar>. =item Hashes A hash represents a set of key/value pairs: my %fruit_color = ("apple", "red", "banana", "yellow"); You can use whitespace and the C<< => >> operator to lay them out more nicely: my %fruit_color = ( apple => "red", banana => "yellow", ); To get at hash elements: $fruit_color{"apple"}; # gives "red" You can get at lists of keys and values with C<keys()> and C<values()>. my @fruits = keys %fruit_color; my @colors = values %fruit_color; Hashes have no particular internal order, though you can sort the keys and loop through them. Just like special scalars and arrays, there are also special hashes. The most well known of these is C<%ENV> which contains environment variables. Read all about it (and other special variables) in L<perlvar>. =back Scalars, arrays and hashes are documented more fully in L<perldata>. More complex data types can be constructed using references, which allow you to build lists and hashes within lists and hashes. A reference is a scalar value and can refer to any other Perl data type. So by storing a reference as the value of an array or hash element, you can easily create lists and hashes within lists and hashes. The following example shows a 2 level hash of hash structure using anonymous hash references. my $variables = { scalar => { description => "single item", sigil => '$', }, array => { description => "ordered list of items", sigil => '@', }, hash => { description => "key/value pairs", sigil => '%', }, }; print "Scalars begin with a $variables->{'scalar'}->{'sigil'}\n"; Exhaustive information on the topic of references can be found in L<perlreftut>, L<perllol>, L<perlref> and L<perldsc>. =head2 Variable scoping Throughout the previous section all the examples have used the syntax: my $var = "value"; The C<my> is actually not required; you could just use: $var = "value"; However, the above usage will create global variables throughout your program, which is bad programming practice. C<my> creates lexically scoped variables instead. The variables are scoped to the block (i.e. a bunch of statements surrounded by curly-braces) in which they are defined. my $x = "foo"; my $some_condition = 1; if ($some_condition) { my $y = "bar"; print $x; # prints "foo" print $y; # prints "bar" } print $x; # prints "foo" print $y; # prints nothing; $y has fallen out of scope Using C<my> in combination with a C<use strict;> at the top of your Perl scripts means that the interpreter will pick up certain common programming errors. For instance, in the example above, the final C<print $y> would cause a compile-time error and prevent you from running the program. Using C<strict> is highly recommended. =head2 Conditional and looping constructs Perl has most of the usual conditional and looping constructs. As of Perl 5.10, it even has a case/switch statement (spelled C<given>/C<when>). See L<perlsyn/"Switch Statements"> for more details. The conditions can be any Perl expression. See the list of operators in the next section for information on comparison and boolean logic operators, which are commonly used in conditional statements. =over 4 =item if if ( condition ) { ... } elsif ( other condition ) { ... } else { ... } There's also a negated version of it: unless ( condition ) { ... } This is provided as a more readable version of C<if (!I<condition>)>. Note that the braces are required in Perl, even if you've only got one line in the block. However, there is a clever way of making your one-line conditional blocks more English like: # the traditional way if ($zippy) { print "Yow!"; } # the Perlish post-condition way print "Yow!" if $zippy; print "We have no bananas" unless $bananas; =item while while ( condition ) { ... } There's also a negated version, for the same reason we have C<unless>: until ( condition ) { ... } You can also use C<while> in a post-condition: print "LA LA LA\n" while 1; # loops forever =item for Exactly like C: for ($i = 0; $i <= $max; $i++) { ... } The C style for loop is rarely needed in Perl since Perl provides the more friendly list scanning C<foreach> loop. =item foreach foreach (@array) { print "This element is $_\n"; } print $list[$_] foreach 0 .. $max; # you don't have to use the default $_ either... foreach my $key (keys %hash) { print "The value of $key is $hash{$key}\n"; } The C<foreach> keyword is actually a synonym for the C<for> keyword. See C<L<perlsyn/"Foreach Loops">>. =back For more detail on looping constructs (and some that weren't mentioned in this overview) see L<perlsyn>. =head2 Builtin operators and functions Perl comes with a wide selection of builtin functions. Some of the ones we've already seen include C<print>, C<sort> and C<reverse>. A list of them is given at the start of L<perlfunc> and you can easily read about any given function by using C<perldoc -f I<functionname>>. Perl operators are documented in full in L<perlop>, but here are a few of the most common ones: =over 4 =item Arithmetic + addition - subtraction * multiplication / division =item Numeric comparison == equality != inequality < less than > greater than <= less than or equal >= greater than or equal =item String comparison eq equality ne inequality lt less than gt greater than le less than or equal ge greater than or equal (Why do we have separate numeric and string comparisons? Because we don't have special variable types, and Perl needs to know whether to sort numerically (where 99 is less than 100) or alphabetically (where 100 comes before 99). =item Boolean logic && and || or ! not (C<and>, C<or> and C<not> aren't just in the above table as descriptions of the operators. They're also supported as operators in their own right. They're more readable than the C-style operators, but have different precedence to C<&&> and friends. Check L<perlop> for more detail.) =item Miscellaneous = assignment . string concatenation x string multiplication (repeats strings) .. range operator (creates a list of numbers or strings) =back Many operators can be combined with a C<=> as follows: $a += 1; # same as $a = $a + 1 $a -= 1; # same as $a = $a - 1 $a .= "\n"; # same as $a = $a . "\n"; =head2 Files and I/O You can open a file for input or output using the C<open()> function. It's documented in extravagant detail in L<perlfunc> and L<perlopentut>, but in short: open(my $in, "<", "input.txt") or die "Can't open input.txt: $!"; open(my $out, ">", "output.txt") or die "Can't open output.txt: $!"; open(my $log, ">>", "my.log") or die "Can't open my.log: $!"; You can read from an open filehandle using the C<< <> >> operator. In scalar context it reads a single line from the filehandle, and in list context it reads the whole file in, assigning each line to an element of the list: my $line = <$in>; my @lines = <$in>; Reading in the whole file at one time is called slurping. It can be useful but it may be a memory hog. Most text file processing can be done a line at a time with Perl's looping constructs. The C<< <> >> operator is most often seen in a C<while> loop: while (<$in>) { # assigns each line in turn to $_ print "Just read in this line: $_"; } We've already seen how to print to standard output using C<print()>. However, C<print()> can also take an optional first argument specifying which filehandle to print to: print STDERR "This is your final warning.\n"; print $out $record; print $log $logmessage; When you're done with your filehandles, you should C<close()> them (though to be honest, Perl will clean up after you if you forget): close $in or die "$in: $!"; =head2 Regular expressions Perl's regular expression support is both broad and deep, and is the subject of lengthy documentation in L<perlrequick>, L<perlretut>, and elsewhere. However, in short: =over 4 =item Simple matching if (/foo/) { ... } # true if $_ contains "foo" if ($a =~ /foo/) { ... } # true if $a contains "foo" The C<//> matching operator is documented in L<perlop>. It operates on C<$_> by default, or can be bound to another variable using the C<=~> binding operator (also documented in L<perlop>). =item Simple substitution s/foo/bar/; # replaces foo with bar in $_ $a =~ s/foo/bar/; # replaces foo with bar in $a $a =~ s/foo/bar/g; # replaces ALL INSTANCES of foo with bar # in $a The C<s///> substitution operator is documented in L<perlop>. =item More complex regular expressions You don't just have to match on fixed strings. In fact, you can match on just about anything you could dream of by using more complex regular expressions. These are documented at great length in L<perlre>, but for the meantime, here's a quick cheat sheet: . a single character \s a whitespace character (space, tab, newline, ...) \S non-whitespace character \d a digit (0-9) \D a non-digit \w a word character (a-z, A-Z, 0-9, _) \W a non-word character [aeiou] matches a single character in the given set [^aeiou] matches a single character outside the given set (foo|bar|baz) matches any of the alternatives specified ^ start of string $ end of string Quantifiers can be used to specify how many of the previous thing you want to match on, where "thing" means either a literal character, one of the metacharacters listed above, or a group of characters or metacharacters in parentheses. * zero or more of the previous thing + one or more of the previous thing ? zero or one of the previous thing {3} matches exactly 3 of the previous thing {3,6} matches between 3 and 6 of the previous thing {3,} matches 3 or more of the previous thing Some brief examples: /^\d+/ string starts with one or more digits /^$/ nothing in the string (start and end are adjacent) /(\d\s){3}/ three digits, each followed by a whitespace character (eg "3 4 5 ") /(a.)+/ matches a string in which every odd-numbered letter is a (eg "abacadaf") # This loop reads from STDIN, and prints non-blank lines: while (<>) { next if /^$/; print; } =item Parentheses for capturing As well as grouping, parentheses serve a second purpose. They can be used to capture the results of parts of the regexp match for later use. The results end up in C<$1>, C<$2> and so on. # a cheap and nasty way to break an email address up into parts if ($email =~ /([^@]+)@(.+)/) { print "Username is $1\n"; print "Hostname is $2\n"; } =item Other regexp features Perl regexps also support backreferences, lookaheads, and all kinds of other complex details. Read all about them in L<perlrequick>, L<perlretut>, and L<perlre>. =back =head2 Writing subroutines Writing subroutines is easy: sub logger { my $logmessage = shift; open my $logfile, ">>", "my.log" or die "Could not open my.log: $!"; print $logfile $logmessage; } Now we can use the subroutine just as any other built-in function: logger("We have a logger subroutine!"); What's that C<shift>? Well, the arguments to a subroutine are available to us as a special array called C<@_> (see L<perlvar> for more on that). The default argument to the C<shift> function just happens to be C<@_>. So C<my $logmessage = shift;> shifts the first item off the list of arguments and assigns it to C<$logmessage>. We can manipulate C<@_> in other ways too: my ($logmessage, $priority) = @_; # common my $logmessage = $_[0]; # uncommon, and ugly Subroutines can also return values: sub square { my $num = shift; my $result = $num * $num; return $result; } Then use it like: $sq = square(8); For more information on writing subroutines, see L<perlsub>. =head2 OO Perl OO Perl is relatively simple and is implemented using references which know what sort of object they are based on Perl's concept of packages. However, OO Perl is largely beyond the scope of this document. Read L<perlootut> and L<perlobj>. As a beginning Perl programmer, your most common use of OO Perl will be in using third-party modules, which are documented below. =head2 Using Perl modules Perl modules provide a range of features to help you avoid reinventing the wheel, and can be downloaded from CPAN ( L<http://www.cpan.org/> ). A number of popular modules are included with the Perl distribution itself. Categories of modules range from text manipulation to network protocols to database integration to graphics. A categorized list of modules is also available from CPAN. To learn how to install modules you download from CPAN, read L<perlmodinstall>. To learn how to use a particular module, use C<perldoc I<Module::Name>>. Typically you will want to C<use I<Module::Name>>, which will then give you access to exported functions or an OO interface to the module. L<perlfaq> contains questions and answers related to many common tasks, and often provides suggestions for good CPAN modules to use. L<perlmod> describes Perl modules in general. L<perlmodlib> lists the modules which came with your Perl installation. If you feel the urge to write Perl modules, L<perlnewmod> will give you good advice. =head1 AUTHOR Kirrily "Skud" Robert <skud@cpan.org> perlref.pod 0000644 00000105150 15125556335 0006723 0 ustar 00 =head1 NAME X<reference> X<pointer> X<data structure> X<structure> X<struct> perlref - Perl references and nested data structures =head1 NOTE This is complete documentation about all aspects of references. For a shorter, tutorial introduction to just the essential features, see L<perlreftut>. =head1 DESCRIPTION Before release 5 of Perl it was difficult to represent complex data structures, because all references had to be symbolic--and even then it was difficult to refer to a variable instead of a symbol table entry. Perl now not only makes it easier to use symbolic references to variables, but also lets you have "hard" references to any piece of data or code. Any scalar may hold a hard reference. Because arrays and hashes contain scalars, you can now easily build arrays of arrays, arrays of hashes, hashes of arrays, arrays of hashes of functions, and so on. Hard references are smart--they keep track of reference counts for you, automatically freeing the thing referred to when its reference count goes to zero. (Reference counts for values in self-referential or cyclic data structures may not go to zero without a little help; see L</"Circular References"> for a detailed explanation.) If that thing happens to be an object, the object is destructed. See L<perlobj> for more about objects. (In a sense, everything in Perl is an object, but we usually reserve the word for references to objects that have been officially "blessed" into a class package.) Symbolic references are names of variables or other objects, just as a symbolic link in a Unix filesystem contains merely the name of a file. The C<*glob> notation is something of a symbolic reference. (Symbolic references are sometimes called "soft references", but please don't call them that; references are confusing enough without useless synonyms.) X<reference, symbolic> X<reference, soft> X<symbolic reference> X<soft reference> In contrast, hard references are more like hard links in a Unix file system: They are used to access an underlying object without concern for what its (other) name is. When the word "reference" is used without an adjective, as in the following paragraph, it is usually talking about a hard reference. X<reference, hard> X<hard reference> References are easy to use in Perl. There is just one overriding principle: in general, Perl does no implicit referencing or dereferencing. When a scalar is holding a reference, it always behaves as a simple scalar. It doesn't magically start being an array or hash or subroutine; you have to tell it explicitly to do so, by dereferencing it. =head2 Making References X<reference, creation> X<referencing> References can be created in several ways. =head3 Backslash Operator X<\> X<backslash> By using the backslash operator on a variable, subroutine, or value. (This works much like the & (address-of) operator in C.) This typically creates I<another> reference to a variable, because there's already a reference to the variable in the symbol table. But the symbol table reference might go away, and you'll still have the reference that the backslash returned. Here are some examples: $scalarref = \$foo; $arrayref = \@ARGV; $hashref = \%ENV; $coderef = \&handler; $globref = \*foo; It isn't possible to create a true reference to an IO handle (filehandle or dirhandle) using the backslash operator. The most you can get is a reference to a typeglob, which is actually a complete symbol table entry. But see the explanation of the C<*foo{THING}> syntax below. However, you can still use type globs and globrefs as though they were IO handles. =head3 Square Brackets X<array, anonymous> X<[> X<[]> X<square bracket> X<bracket, square> X<arrayref> X<array reference> X<reference, array> A reference to an anonymous array can be created using square brackets: $arrayref = [1, 2, ['a', 'b', 'c']]; Here we've created a reference to an anonymous array of three elements whose final element is itself a reference to another anonymous array of three elements. (The multidimensional syntax described later can be used to access this. For example, after the above, C<< $arrayref->[2][1] >> would have the value "b".) Taking a reference to an enumerated list is not the same as using square brackets--instead it's the same as creating a list of references! @list = (\$a, \@b, \%c); @list = \($a, @b, %c); # same thing! As a special case, C<\(@foo)> returns a list of references to the contents of C<@foo>, not a reference to C<@foo> itself. Likewise for C<%foo>, except that the key references are to copies (since the keys are just strings rather than full-fledged scalars). =head3 Curly Brackets X<hash, anonymous> X<{> X<{}> X<curly bracket> X<bracket, curly> X<brace> X<hashref> X<hash reference> X<reference, hash> A reference to an anonymous hash can be created using curly brackets: $hashref = { 'Adam' => 'Eve', 'Clyde' => 'Bonnie', }; Anonymous hash and array composers like these can be intermixed freely to produce as complicated a structure as you want. The multidimensional syntax described below works for these too. The values above are literals, but variables and expressions would work just as well, because assignment operators in Perl (even within local() or my()) are executable statements, not compile-time declarations. Because curly brackets (braces) are used for several other things including BLOCKs, you may occasionally have to disambiguate braces at the beginning of a statement by putting a C<+> or a C<return> in front so that Perl realizes the opening brace isn't starting a BLOCK. The economy and mnemonic value of using curlies is deemed worth this occasional extra hassle. For example, if you wanted a function to make a new hash and return a reference to it, you have these options: sub hashem { { @_ } } # silently wrong sub hashem { +{ @_ } } # ok sub hashem { return { @_ } } # ok On the other hand, if you want the other meaning, you can do this: sub showem { { @_ } } # ambiguous (currently ok, # but may change) sub showem { {; @_ } } # ok sub showem { { return @_ } } # ok The leading C<+{> and C<{;> always serve to disambiguate the expression to mean either the HASH reference, or the BLOCK. =head3 Anonymous Subroutines X<subroutine, anonymous> X<subroutine, reference> X<reference, subroutine> X<scope, lexical> X<closure> X<lexical> X<lexical scope> A reference to an anonymous subroutine can be created by using C<sub> without a subname: $coderef = sub { print "Boink!\n" }; Note the semicolon. Except for the code inside not being immediately executed, a C<sub {}> is not so much a declaration as it is an operator, like C<do{}> or C<eval{}>. (However, no matter how many times you execute that particular line (unless you're in an C<eval("...")>), $coderef will still have a reference to the I<same> anonymous subroutine.) Anonymous subroutines act as closures with respect to my() variables, that is, variables lexically visible within the current scope. Closure is a notion out of the Lisp world that says if you define an anonymous function in a particular lexical context, it pretends to run in that context even when it's called outside the context. In human terms, it's a funny way of passing arguments to a subroutine when you define it as well as when you call it. It's useful for setting up little bits of code to run later, such as callbacks. You can even do object-oriented stuff with it, though Perl already provides a different mechanism to do that--see L<perlobj>. You might also think of closure as a way to write a subroutine template without using eval(). Here's a small example of how closures work: sub newprint { my $x = shift; return sub { my $y = shift; print "$x, $y!\n"; }; } $h = newprint("Howdy"); $g = newprint("Greetings"); # Time passes... &$h("world"); &$g("earthlings"); This prints Howdy, world! Greetings, earthlings! Note particularly that $x continues to refer to the value passed into newprint() I<despite> "my $x" having gone out of scope by the time the anonymous subroutine runs. That's what a closure is all about. This applies only to lexical variables, by the way. Dynamic variables continue to work as they have always worked. Closure is not something that most Perl programmers need trouble themselves about to begin with. =head3 Constructors X<constructor> X<new> References are often returned by special subroutines called constructors. Perl objects are just references to a special type of object that happens to know which package it's associated with. Constructors are just special subroutines that know how to create that association. They do so by starting with an ordinary reference, and it remains an ordinary reference even while it's also being an object. Constructors are often named C<new()>. You I<can> call them indirectly: $objref = new Doggie( Tail => 'short', Ears => 'long' ); But that can produce ambiguous syntax in certain cases, so it's often better to use the direct method invocation approach: $objref = Doggie->new(Tail => 'short', Ears => 'long'); use Term::Cap; $terminal = Term::Cap->Tgetent( { OSPEED => 9600 }); use Tk; $main = MainWindow->new(); $menubar = $main->Frame(-relief => "raised", -borderwidth => 2) =head3 Autovivification X<autovivification> References of the appropriate type can spring into existence if you dereference them in a context that assumes they exist. Because we haven't talked about dereferencing yet, we can't show you any examples yet. =head3 Typeglob Slots X<*foo{THING}> X<*> A reference can be created by using a special syntax, lovingly known as the *foo{THING} syntax. *foo{THING} returns a reference to the THING slot in *foo (which is the symbol table entry which holds everything known as foo). $scalarref = *foo{SCALAR}; $arrayref = *ARGV{ARRAY}; $hashref = *ENV{HASH}; $coderef = *handler{CODE}; $ioref = *STDIN{IO}; $globref = *foo{GLOB}; $formatref = *foo{FORMAT}; $globname = *foo{NAME}; # "foo" $pkgname = *foo{PACKAGE}; # "main" Most of these are self-explanatory, but C<*foo{IO}> deserves special attention. It returns the IO handle, used for file handles (L<perlfunc/open>), sockets (L<perlfunc/socket> and L<perlfunc/socketpair>), and directory handles (L<perlfunc/opendir>). For compatibility with previous versions of Perl, C<*foo{FILEHANDLE}> is a synonym for C<*foo{IO}>, though it is discouraged, to encourage a consistent use of one name: IO. On perls between v5.8 and v5.22, it will issue a deprecation warning, but this deprecation has since been rescinded. C<*foo{THING}> returns undef if that particular THING hasn't been used yet, except in the case of scalars. C<*foo{SCALAR}> returns a reference to an anonymous scalar if $foo hasn't been used yet. This might change in a future release. C<*foo{NAME}> and C<*foo{PACKAGE}> are the exception, in that they return strings, rather than references. These return the package and name of the typeglob itself, rather than one that has been assigned to it. So, after C<*foo=*Foo::bar>, C<*foo> will become "*Foo::bar" when used as a string, but C<*foo{PACKAGE}> and C<*foo{NAME}> will continue to produce "main" and "foo", respectively. C<*foo{IO}> is an alternative to the C<*HANDLE> mechanism given in L<perldata/"Typeglobs and Filehandles"> for passing filehandles into or out of subroutines, or storing into larger data structures. Its disadvantage is that it won't create a new filehandle for you. Its advantage is that you have less risk of clobbering more than you want to with a typeglob assignment. (It still conflates file and directory handles, though.) However, if you assign the incoming value to a scalar instead of a typeglob as we do in the examples below, there's no risk of that happening. splutter(*STDOUT); # pass the whole glob splutter(*STDOUT{IO}); # pass both file and dir handles sub splutter { my $fh = shift; print $fh "her um well a hmmm\n"; } $rec = get_rec(*STDIN); # pass the whole glob $rec = get_rec(*STDIN{IO}); # pass both file and dir handles sub get_rec { my $fh = shift; return scalar <$fh>; } =head2 Using References X<reference, use> X<dereferencing> X<dereference> That's it for creating references. By now you're probably dying to know how to use references to get back to your long-lost data. There are several basic methods. =head3 Simple Scalar Anywhere you'd put an identifier (or chain of identifiers) as part of a variable or subroutine name, you can replace the identifier with a simple scalar variable containing a reference of the correct type: $bar = $$scalarref; push(@$arrayref, $filename); $$arrayref[0] = "January"; $$hashref{"KEY"} = "VALUE"; &$coderef(1,2,3); print $globref "output\n"; It's important to understand that we are specifically I<not> dereferencing C<$arrayref[0]> or C<$hashref{"KEY"}> there. The dereference of the scalar variable happens I<before> it does any key lookups. Anything more complicated than a simple scalar variable must use methods 2 or 3 below. However, a "simple scalar" includes an identifier that itself uses method 1 recursively. Therefore, the following prints "howdy". $refrefref = \\\"howdy"; print $$$$refrefref; =head3 Block Anywhere you'd put an identifier (or chain of identifiers) as part of a variable or subroutine name, you can replace the identifier with a BLOCK returning a reference of the correct type. In other words, the previous examples could be written like this: $bar = ${$scalarref}; push(@{$arrayref}, $filename); ${$arrayref}[0] = "January"; ${$hashref}{"KEY"} = "VALUE"; &{$coderef}(1,2,3); $globref->print("output\n"); # iff IO::Handle is loaded Admittedly, it's a little silly to use the curlies in this case, but the BLOCK can contain any arbitrary expression, in particular, subscripted expressions: &{ $dispatch{$index} }(1,2,3); # call correct routine Because of being able to omit the curlies for the simple case of C<$$x>, people often make the mistake of viewing the dereferencing symbols as proper operators, and wonder about their precedence. If they were, though, you could use parentheses instead of braces. That's not the case. Consider the difference below; case 0 is a short-hand version of case 1, I<not> case 2: $$hashref{"KEY"} = "VALUE"; # CASE 0 ${$hashref}{"KEY"} = "VALUE"; # CASE 1 ${$hashref{"KEY"}} = "VALUE"; # CASE 2 ${$hashref->{"KEY"}} = "VALUE"; # CASE 3 Case 2 is also deceptive in that you're accessing a variable called %hashref, not dereferencing through $hashref to the hash it's presumably referencing. That would be case 3. =head3 Arrow Notation Subroutine calls and lookups of individual array elements arise often enough that it gets cumbersome to use method 2. As a form of syntactic sugar, the examples for method 2 may be written: $arrayref->[0] = "January"; # Array element $hashref->{"KEY"} = "VALUE"; # Hash element $coderef->(1,2,3); # Subroutine call The left side of the arrow can be any expression returning a reference, including a previous dereference. Note that C<$array[$x]> is I<not> the same thing as C<< $array->[$x] >> here: $array[$x]->{"foo"}->[0] = "January"; This is one of the cases we mentioned earlier in which references could spring into existence when in an lvalue context. Before this statement, C<$array[$x]> may have been undefined. If so, it's automatically defined with a hash reference so that we can look up C<{"foo"}> in it. Likewise C<< $array[$x]->{"foo"} >> will automatically get defined with an array reference so that we can look up C<[0]> in it. This process is called I<autovivification>. One more thing here. The arrow is optional I<between> brackets subscripts, so you can shrink the above down to $array[$x]{"foo"}[0] = "January"; Which, in the degenerate case of using only ordinary arrays, gives you multidimensional arrays just like C's: $score[$x][$y][$z] += 42; Well, okay, not entirely like C's arrays, actually. C doesn't know how to grow its arrays on demand. Perl does. =head3 Objects If a reference happens to be a reference to an object, then there are probably methods to access the things referred to, and you should probably stick to those methods unless you're in the class package that defines the object's methods. In other words, be nice, and don't violate the object's encapsulation without a very good reason. Perl does not enforce encapsulation. We are not totalitarians here. We do expect some basic civility though. =head3 Miscellaneous Usage Using a string or number as a reference produces a symbolic reference, as explained above. Using a reference as a number produces an integer representing its storage location in memory. The only useful thing to be done with this is to compare two references numerically to see whether they refer to the same location. X<reference, numeric context> if ($ref1 == $ref2) { # cheap numeric compare of references print "refs 1 and 2 refer to the same thing\n"; } Using a reference as a string produces both its referent's type, including any package blessing as described in L<perlobj>, as well as the numeric address expressed in hex. The ref() operator returns just the type of thing the reference is pointing to, without the address. See L<perlfunc/ref> for details and examples of its use. X<reference, string context> The bless() operator may be used to associate the object a reference points to with a package functioning as an object class. See L<perlobj>. A typeglob may be dereferenced the same way a reference can, because the dereference syntax always indicates the type of reference desired. So C<${*foo}> and C<${\$foo}> both indicate the same scalar variable. Here's a trick for interpolating a subroutine call into a string: print "My sub returned @{[mysub(1,2,3)]} that time.\n"; The way it works is that when the C<@{...}> is seen in the double-quoted string, it's evaluated as a block. The block creates a reference to an anonymous array containing the results of the call to C<mysub(1,2,3)>. So the whole block returns a reference to an array, which is then dereferenced by C<@{...}> and stuck into the double-quoted string. This chicanery is also useful for arbitrary expressions: print "That yields @{[$n + 5]} widgets\n"; Similarly, an expression that returns a reference to a scalar can be dereferenced via C<${...}>. Thus, the above expression may be written as: print "That yields ${\($n + 5)} widgets\n"; =head2 Circular References X<circular reference> X<reference, circular> It is possible to create a "circular reference" in Perl, which can lead to memory leaks. A circular reference occurs when two references contain a reference to each other, like this: my $foo = {}; my $bar = { foo => $foo }; $foo->{bar} = $bar; You can also create a circular reference with a single variable: my $foo; $foo = \$foo; In this case, the reference count for the variables will never reach 0, and the references will never be garbage-collected. This can lead to memory leaks. Because objects in Perl are implemented as references, it's possible to have circular references with objects as well. Imagine a TreeNode class where each node references its parent and child nodes. Any node with a parent will be part of a circular reference. You can break circular references by creating a "weak reference". A weak reference does not increment the reference count for a variable, which means that the object can go out of scope and be destroyed. You can weaken a reference with the C<weaken> function exported by the L<Scalar::Util> module. Here's how we can make the first example safer: use Scalar::Util 'weaken'; my $foo = {}; my $bar = { foo => $foo }; $foo->{bar} = $bar; weaken $foo->{bar}; The reference from C<$foo> to C<$bar> has been weakened. When the C<$bar> variable goes out of scope, it will be garbage-collected. The next time you look at the value of the C<< $foo->{bar} >> key, it will be C<undef>. This action at a distance can be confusing, so you should be careful with your use of weaken. You should weaken the reference in the variable that will go out of scope I<first>. That way, the longer-lived variable will contain the expected reference until it goes out of scope. =head2 Symbolic references X<reference, symbolic> X<reference, soft> X<symbolic reference> X<soft reference> We said that references spring into existence as necessary if they are undefined, but we didn't say what happens if a value used as a reference is already defined, but I<isn't> a hard reference. If you use it as a reference, it'll be treated as a symbolic reference. That is, the value of the scalar is taken to be the I<name> of a variable, rather than a direct link to a (possibly) anonymous value. People frequently expect it to work like this. So it does. $name = "foo"; $$name = 1; # Sets $foo ${$name} = 2; # Sets $foo ${$name x 2} = 3; # Sets $foofoo $name->[0] = 4; # Sets $foo[0] @$name = (); # Clears @foo &$name(); # Calls &foo() $pack = "THAT"; ${"${pack}::$name"} = 5; # Sets $THAT::foo without eval This is powerful, and slightly dangerous, in that it's possible to intend (with the utmost sincerity) to use a hard reference, and accidentally use a symbolic reference instead. To protect against that, you can say use strict 'refs'; and then only hard references will be allowed for the rest of the enclosing block. An inner block may countermand that with no strict 'refs'; Only package variables (globals, even if localized) are visible to symbolic references. Lexical variables (declared with my()) aren't in a symbol table, and thus are invisible to this mechanism. For example: local $value = 10; $ref = "value"; { my $value = 20; print $$ref; } This will still print 10, not 20. Remember that local() affects package variables, which are all "global" to the package. =head2 Not-so-symbolic references Brackets around a symbolic reference can simply serve to isolate an identifier or variable name from the rest of an expression, just as they always have within a string. For example, $push = "pop on "; print "${push}over"; has always meant to print "pop on over", even though push is a reserved word. This is generalized to work the same without the enclosing double quotes, so that print ${push} . "over"; and even print ${ push } . "over"; will have the same effect. This construct is I<not> considered to be a symbolic reference when you're using strict refs: use strict 'refs'; ${ bareword }; # Okay, means $bareword. ${ "bareword" }; # Error, symbolic reference. Similarly, because of all the subscripting that is done using single words, the same rule applies to any bareword that is used for subscripting a hash. So now, instead of writing $hash{ "aaa" }{ "bbb" }{ "ccc" } you can write just $hash{ aaa }{ bbb }{ ccc } and not worry about whether the subscripts are reserved words. In the rare event that you do wish to do something like $hash{ shift } you can force interpretation as a reserved word by adding anything that makes it more than a bareword: $hash{ shift() } $hash{ +shift } $hash{ shift @_ } The C<use warnings> pragma or the B<-w> switch will warn you if it interprets a reserved word as a string. But it will no longer warn you about using lowercase words, because the string is effectively quoted. =head2 Pseudo-hashes: Using an array as a hash X<pseudo-hash> X<pseudo hash> X<pseudohash> Pseudo-hashes have been removed from Perl. The 'fields' pragma remains available. =head2 Function Templates X<scope, lexical> X<closure> X<lexical> X<lexical scope> X<subroutine, nested> X<sub, nested> X<subroutine, local> X<sub, local> As explained above, an anonymous function with access to the lexical variables visible when that function was compiled, creates a closure. It retains access to those variables even though it doesn't get run until later, such as in a signal handler or a Tk callback. Using a closure as a function template allows us to generate many functions that act similarly. Suppose you wanted functions named after the colors that generated HTML font changes for the various colors: print "Be ", red("careful"), "with that ", green("light"); The red() and green() functions would be similar. To create these, we'll assign a closure to a typeglob of the name of the function we're trying to build. @colors = qw(red blue green yellow orange purple violet); for my $name (@colors) { no strict 'refs'; # allow symbol table manipulation *$name = *{uc $name} = sub { "<FONT COLOR='$name'>@_</FONT>" }; } Now all those different functions appear to exist independently. You can call red(), RED(), blue(), BLUE(), green(), etc. This technique saves on both compile time and memory use, and is less error-prone as well, since syntax checks happen at compile time. It's critical that any variables in the anonymous subroutine be lexicals in order to create a proper closure. That's the reasons for the C<my> on the loop iteration variable. This is one of the only places where giving a prototype to a closure makes much sense. If you wanted to impose scalar context on the arguments of these functions (probably not a wise idea for this particular example), you could have written it this way instead: *$name = sub ($) { "<FONT COLOR='$name'>$_[0]</FONT>" }; However, since prototype checking happens at compile time, the assignment above happens too late to be of much use. You could address this by putting the whole loop of assignments within a BEGIN block, forcing it to occur during compilation. Access to lexicals that change over time--like those in the C<for> loop above, basically aliases to elements from the surrounding lexical scopes-- only works with anonymous subs, not with named subroutines. Generally said, named subroutines do not nest properly and should only be declared in the main package scope. This is because named subroutines are created at compile time so their lexical variables get assigned to the parent lexicals from the first execution of the parent block. If a parent scope is entered a second time, its lexicals are created again, while the nested subs still reference the old ones. Anonymous subroutines get to capture each time you execute the C<sub> operator, as they are created on the fly. If you are accustomed to using nested subroutines in other programming languages with their own private variables, you'll have to work at it a bit in Perl. The intuitive coding of this type of thing incurs mysterious warnings about "will not stay shared" due to the reasons explained above. For example, this won't work: sub outer { my $x = $_[0] + 35; sub inner { return $x * 19 } # WRONG return $x + inner(); } A work-around is the following: sub outer { my $x = $_[0] + 35; local *inner = sub { return $x * 19 }; return $x + inner(); } Now inner() can only be called from within outer(), because of the temporary assignments of the anonymous subroutine. But when it does, it has normal access to the lexical variable $x from the scope of outer() at the time outer is invoked. This has the interesting effect of creating a function local to another function, something not normally supported in Perl. =head1 WARNING: Don't use references as hash keys X<reference, string context> X<reference, use as hash key> You may not (usefully) use a reference as the key to a hash. It will be converted into a string: $x{ \$a } = $a; If you try to dereference the key, it won't do a hard dereference, and you won't accomplish what you're attempting. You might want to do something more like $r = \@a; $x{ $r } = $r; And then at least you can use the values(), which will be real refs, instead of the keys(), which won't. The standard Tie::RefHash module provides a convenient workaround to this. =head2 Postfix Dereference Syntax Beginning in v5.20.0, a postfix syntax for using references is available. It behaves as described in L</Using References>, but instead of a prefixed sigil, a postfixed sigil-and-star is used. For example: $r = \@a; @b = $r->@*; # equivalent to @$r or @{ $r } $r = [ 1, [ 2, 3 ], 4 ]; $r->[1]->@*; # equivalent to @{ $r->[1] } In Perl 5.20 and 5.22, this syntax must be enabled with C<use feature 'postderef'>. As of Perl 5.24, no feature declarations are required to make it available. Postfix dereference should work in all circumstances where block (circumfix) dereference worked, and should be entirely equivalent. This syntax allows dereferencing to be written and read entirely left-to-right. The following equivalencies are defined: $sref->$*; # same as ${ $sref } $aref->@*; # same as @{ $aref } $aref->$#*; # same as $#{ $aref } $href->%*; # same as %{ $href } $cref->&*; # same as &{ $cref } $gref->**; # same as *{ $gref } Note especially that C<< $cref->&* >> is I<not> equivalent to C<< $cref->() >>, and can serve different purposes. Glob elements can be extracted through the postfix dereferencing feature: $gref->*{SCALAR}; # same as *{ $gref }{SCALAR} Postfix array and scalar dereferencing I<can> be used in interpolating strings (double quotes or the C<qq> operator), but only if the C<postderef_qq> feature is enabled. =head2 Postfix Reference Slicing Value slices of arrays and hashes may also be taken with postfix dereferencing notation, with the following equivalencies: $aref->@[ ... ]; # same as @$aref[ ... ] $href->@{ ... }; # same as @$href{ ... } Postfix key/value pair slicing, added in 5.20.0 and documented in L<the KeyE<sol>Value Hash Slices section of perldata|perldata/"Key/Value Hash Slices">, also behaves as expected: $aref->%[ ... ]; # same as %$aref[ ... ] $href->%{ ... }; # same as %$href{ ... } As with postfix array, postfix value slice dereferencing I<can> be used in interpolating strings (double quotes or the C<qq> operator), but only if the C<postderef_qq> L<feature> is enabled. =head2 Assigning to References Beginning in v5.22.0, the referencing operator can be assigned to. It performs an aliasing operation, so that the variable name referenced on the left-hand side becomes an alias for the thing referenced on the right-hand side: \$a = \$b; # $a and $b now point to the same scalar \&foo = \&bar; # foo() now means bar() This syntax must be enabled with C<use feature 'refaliasing'>. It is experimental, and will warn by default unless C<no warnings 'experimental::refaliasing'> is in effect. These forms may be assigned to, and cause the right-hand side to be evaluated in scalar context: \$scalar \@array \%hash \&sub \my $scalar \my @array \my %hash \state $scalar # or @array, etc. \our $scalar # etc. \local $scalar # etc. \local our $scalar # etc. \$some_array[$index] \$some_hash{$key} \local $some_array[$index] \local $some_hash{$key} condition ? \$this : \$that[0] # etc. Slicing operations and parentheses cause the right-hand side to be evaluated in list context: \@array[5..7] (\@array[5..7]) \(@array[5..7]) \@hash{'foo','bar'} (\@hash{'foo','bar'}) \(@hash{'foo','bar'}) (\$scalar) \($scalar) \(my $scalar) \my($scalar) (\@array) (\%hash) (\&sub) \(&sub) \($foo, @bar, %baz) (\$foo, \@bar, \%baz) Each element on the right-hand side must be a reference to a datum of the right type. Parentheses immediately surrounding an array (and possibly also C<my>/C<state>/C<our>/C<local>) will make each element of the array an alias to the corresponding scalar referenced on the right-hand side: \(@a) = \(@b); # @a and @b now have the same elements \my(@a) = \(@b); # likewise \(my @a) = \(@b); # likewise push @a, 3; # but now @a has an extra element that @b lacks \(@a) = (\$a, \$b, \$c); # @a now contains $a, $b, and $c Combining that form with C<local> and putting parentheses immediately around a hash are forbidden (because it is not clear what they should do): \local(@array) = foo(); # WRONG \(%hash) = bar(); # WRONG Assignment to references and non-references may be combined in lists and conditional ternary expressions, as long as the values on the right-hand side are the right type for each element on the left, though this may make for obfuscated code: (my $tom, \my $dick, \my @harry) = (\1, \2, [1..3]); # $tom is now \1 # $dick is now 2 (read-only) # @harry is (1,2,3) my $type = ref $thingy; ($type ? $type eq 'ARRAY' ? \@foo : \$bar : $baz) = $thingy; The C<foreach> loop can also take a reference constructor for its loop variable, though the syntax is limited to one of the following, with an optional C<my>, C<state>, or C<our> after the backslash: \$s \@a \%h \&c No parentheses are permitted. This feature is particularly useful for arrays-of-arrays, or arrays-of-hashes: foreach \my @a (@array_of_arrays) { frobnicate($a[0], $a[-1]); } foreach \my %h (@array_of_hashes) { $h{gelastic}++ if $h{type} eq 'funny'; } B<CAVEAT:> Aliasing does not work correctly with closures. If you try to alias lexical variables from an inner subroutine or C<eval>, the aliasing will only be visible within that inner sub, and will not affect the outer subroutine where the variables are declared. This bizarre behavior is subject to change. =head1 Declaring a Reference to a Variable Beginning in v5.26.0, the referencing operator can come after C<my>, C<state>, C<our>, or C<local>. This syntax must be enabled with C<use feature 'declared_refs'>. It is experimental, and will warn by default unless C<no warnings 'experimental::refaliasing'> is in effect. This feature makes these: my \$x; our \$y; equivalent to: \my $x; \our $x; It is intended mainly for use in assignments to references (see L</Assigning to References>, above). It also allows the backslash to be used on just some items in a list of declared variables: my ($foo, \@bar, \%baz); # equivalent to: my $foo, \my(@bar, %baz); =head1 SEE ALSO Besides the obvious documents, source code can be instructive. Some pathological examples of the use of references can be found in the F<t/op/ref.t> regression test in the Perl source directory. See also L<perldsc> and L<perllol> for how to use references to create complex data structures, and L<perlootut> and L<perlobj> for how to use them to create objects. perlgpl.pod 0000644 00000032767 15125556335 0006746 0 ustar 00 =head1 NAME perlgpl - the GNU General Public License, version 1 =head1 SYNOPSIS You can refer to this document in Pod via "L<perlgpl>" Or you can see this document by entering "perldoc perlgpl" =head1 DESCRIPTION Perl is free software; you can redistribute it and/or modify it under the terms of either: a) the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version, or b) the "Artistic License" which comes with this Kit. This is the B<"GNU General Public License, version 1">. It's here so that modules, programs, etc., that want to declare this as their distribution license can link to it. For the Perl Artistic License, see L<perlartistic>. =cut # Because the following document's language disallows "changing" # it, we haven't gone thru and prettied it up with =item's or # anything. It's good enough the way it is. =head1 GNU GENERAL PUBLIC LICENSE GNU GENERAL PUBLIC LICENSE Version 1, February 1989 Copyright (C) 1989 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The license agreements of most software companies try to keep users at the mercy of those companies. By contrast, our General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. The General Public License applies to the Free Software Foundation's software and to any other program whose authors commit to using it. You can use it for your programs, too. When we speak of free software, we are referring to freedom, not price. Specifically, the General Public License is designed to make sure that you have the freedom to give away or sell copies of free software, that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of a such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must tell them their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any work containing the Program or a portion of it, either verbatim or with modifications. Each licensee is addressed as "you". 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this General Public License and to the absence of any warranty; and give any other recipients of the Program a copy of this General Public License along with the Program. You may charge a fee for the physical act of transferring a copy. 2. You may modify your copy or copies of the Program or any portion of it, and copy and distribute such modifications under the terms of Paragraph 1 above, provided that you also do the following: a) cause the modified files to carry prominent notices stating that you changed the files and the date of any change; and b) cause the whole of any work that you distribute or publish, that in whole or in part contains the Program or any part thereof, either with or without modifications, to be licensed at no charge to all third parties under the terms of this General Public License (except that you may choose to grant warranty protection to some or all third parties, at your option). c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the simplest and most usual way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this General Public License. d) You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. Mere aggregation of another independent work with the Program (or its derivative) on a volume of a storage or distribution medium does not bring the other work under the scope of these terms. 3. You may copy and distribute the Program (or a portion or derivative of it, under Paragraph 2) in object code or executable form under the terms of Paragraphs 1 and 2 above provided that you also do one of the following: a) accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Paragraphs 1 and 2 above; or, b) accompany it with a written offer, valid for at least three years, to give any third party free (except for a nominal charge for the cost of distribution) a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Paragraphs 1 and 2 above; or, c) accompany it with the information you received as to where the corresponding source code may be obtained. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form alone.) Source code for a work means the preferred form of the work for making modifications to it. For an executable file, complete source code means all the source code for all modules it contains; but, as a special exception, it need not include source code for modules which are standard libraries that accompany the operating system on which the executable file runs, or for standard header files or definitions files that accompany that operating system. 4. You may not copy, modify, sublicense, distribute or transfer the Program except as expressly provided under this General Public License. Any attempt otherwise to copy, modify, sublicense, distribute or transfer the Program is void, and will automatically terminate your rights to use the Program under this License. However, parties who have received copies, or rights to use copies, from you under this General Public License will not have their licenses terminated so long as such parties remain in full compliance. 5. By copying, distributing or modifying the Program (or any work based on the Program) you indicate your acceptance of this license to do so, and all its terms and conditions. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. 7. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of the license which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the license, you may choose any version ever published by the Free Software Foundation. 8. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 9. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 10. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS Appendix: How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to humanity, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. <one line to give the program's name and a brief idea of what it does.> Copyright (C) 19yy <name of author> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) 19xx name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type 'show w'. This is free software, and you are welcome to redistribute it under certain conditions; type 'show c' for details. The hypothetical commands 'show w' and 'show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than 'show w' and 'show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program 'Gnomovision' (a program to direct compilers to make passes at assemblers) written by James Hacker. <signature of Ty Coon>, 1 April 1989 Ty Coon, President of Vice That's all there is to it! =cut perlsub.pod 0000644 00000221245 15125556335 0006744 0 ustar 00 =head1 NAME X<subroutine> X<function> perlsub - Perl subroutines =head1 SYNOPSIS To declare subroutines: X<subroutine, declaration> X<sub> sub NAME; # A "forward" declaration. sub NAME(PROTO); # ditto, but with prototypes sub NAME : ATTRS; # with attributes sub NAME(PROTO) : ATTRS; # with attributes and prototypes sub NAME BLOCK # A declaration and a definition. sub NAME(PROTO) BLOCK # ditto, but with prototypes sub NAME : ATTRS BLOCK # with attributes sub NAME(PROTO) : ATTRS BLOCK # with prototypes and attributes use feature 'signatures'; sub NAME(SIG) BLOCK # with signature sub NAME :ATTRS (SIG) BLOCK # with signature, attributes sub NAME :prototype(PROTO) (SIG) BLOCK # with signature, prototype To define an anonymous subroutine at runtime: X<subroutine, anonymous> $subref = sub BLOCK; # no proto $subref = sub (PROTO) BLOCK; # with proto $subref = sub : ATTRS BLOCK; # with attributes $subref = sub (PROTO) : ATTRS BLOCK; # with proto and attributes use feature 'signatures'; $subref = sub (SIG) BLOCK; # with signature $subref = sub : ATTRS(SIG) BLOCK; # with signature, attributes To import subroutines: X<import> use MODULE qw(NAME1 NAME2 NAME3); To call subroutines: X<subroutine, call> X<call> NAME(LIST); # & is optional with parentheses. NAME LIST; # Parentheses optional if predeclared/imported. &NAME(LIST); # Circumvent prototypes. &NAME; # Makes current @_ visible to called subroutine. =head1 DESCRIPTION Like many languages, Perl provides for user-defined subroutines. These may be located anywhere in the main program, loaded in from other files via the C<do>, C<require>, or C<use> keywords, or generated on the fly using C<eval> or anonymous subroutines. You can even call a function indirectly using a variable containing its name or a CODE reference. The Perl model for function call and return values is simple: all functions are passed as parameters one single flat list of scalars, and all functions likewise return to their caller one single flat list of scalars. Any arrays or hashes in these call and return lists will collapse, losing their identities--but you may always use pass-by-reference instead to avoid this. Both call and return lists may contain as many or as few scalar elements as you'd like. (Often a function without an explicit return statement is called a subroutine, but there's really no difference from Perl's perspective.) X<subroutine, parameter> X<parameter> Any arguments passed in show up in the array C<@_>. (They may also show up in lexical variables introduced by a signature; see L</Signatures> below.) Therefore, if you called a function with two arguments, those would be stored in C<$_[0]> and C<$_[1]>. The array C<@_> is a local array, but its elements are aliases for the actual scalar parameters. In particular, if an element C<$_[0]> is updated, the corresponding argument is updated (or an error occurs if it is not updatable). If an argument is an array or hash element which did not exist when the function was called, that element is created only when (and if) it is modified or a reference to it is taken. (Some earlier versions of Perl created the element whether or not the element was assigned to.) Assigning to the whole array C<@_> removes that aliasing, and does not update any arguments. X<subroutine, argument> X<argument> X<@_> A C<return> statement may be used to exit a subroutine, optionally specifying the returned value, which will be evaluated in the appropriate context (list, scalar, or void) depending on the context of the subroutine call. If you specify no return value, the subroutine returns an empty list in list context, the undefined value in scalar context, or nothing in void context. If you return one or more aggregates (arrays and hashes), these will be flattened together into one large indistinguishable list. If no C<return> is found and if the last statement is an expression, its value is returned. If the last statement is a loop control structure like a C<foreach> or a C<while>, the returned value is unspecified. The empty sub returns the empty list. X<subroutine, return value> X<return value> X<return> Aside from an experimental facility (see L</Signatures> below), Perl does not have named formal parameters. In practice all you do is assign to a C<my()> list of these. Variables that aren't declared to be private are global variables. For gory details on creating private variables, see L</"Private Variables via my()"> and L</"Temporary Values via local()">. To create protected environments for a set of functions in a separate package (and probably a separate file), see L<perlmod/"Packages">. X<formal parameter> X<parameter, formal> Example: sub max { my $max = shift(@_); foreach $foo (@_) { $max = $foo if $max < $foo; } return $max; } $bestday = max($mon,$tue,$wed,$thu,$fri); Example: # get a line, combining continuation lines # that start with whitespace sub get_line { $thisline = $lookahead; # global variables! LINE: while (defined($lookahead = <STDIN>)) { if ($lookahead =~ /^[ \t]/) { $thisline .= $lookahead; } else { last LINE; } } return $thisline; } $lookahead = <STDIN>; # get first line while (defined($line = get_line())) { ... } Assigning to a list of private variables to name your arguments: sub maybeset { my($key, $value) = @_; $Foo{$key} = $value unless $Foo{$key}; } Because the assignment copies the values, this also has the effect of turning call-by-reference into call-by-value. Otherwise a function is free to do in-place modifications of C<@_> and change its caller's values. X<call-by-reference> X<call-by-value> upcase_in($v1, $v2); # this changes $v1 and $v2 sub upcase_in { for (@_) { tr/a-z/A-Z/ } } You aren't allowed to modify constants in this way, of course. If an argument were actually literal and you tried to change it, you'd take a (presumably fatal) exception. For example, this won't work: X<call-by-reference> X<call-by-value> upcase_in("frederick"); It would be much safer if the C<upcase_in()> function were written to return a copy of its parameters instead of changing them in place: ($v3, $v4) = upcase($v1, $v2); # this doesn't change $v1 and $v2 sub upcase { return unless defined wantarray; # void context, do nothing my @parms = @_; for (@parms) { tr/a-z/A-Z/ } return wantarray ? @parms : $parms[0]; } Notice how this (unprototyped) function doesn't care whether it was passed real scalars or arrays. Perl sees all arguments as one big, long, flat parameter list in C<@_>. This is one area where Perl's simple argument-passing style shines. The C<upcase()> function would work perfectly well without changing the C<upcase()> definition even if we fed it things like this: @newlist = upcase(@list1, @list2); @newlist = upcase( split /:/, $var ); Do not, however, be tempted to do this: (@a, @b) = upcase(@list1, @list2); Like the flattened incoming parameter list, the return list is also flattened on return. So all you have managed to do here is stored everything in C<@a> and made C<@b> empty. See L</Pass by Reference> for alternatives. A subroutine may be called using an explicit C<&> prefix. The C<&> is optional in modern Perl, as are parentheses if the subroutine has been predeclared. The C<&> is I<not> optional when just naming the subroutine, such as when it's used as an argument to defined() or undef(). Nor is it optional when you want to do an indirect subroutine call with a subroutine name or reference using the C<&$subref()> or C<&{$subref}()> constructs, although the C<< $subref->() >> notation solves that problem. See L<perlref> for more about all that. X<&> Subroutines may be called recursively. If a subroutine is called using the C<&> form, the argument list is optional, and if omitted, no C<@_> array is set up for the subroutine: the C<@_> array at the time of the call is visible to subroutine instead. This is an efficiency mechanism that new users may wish to avoid. X<recursion> &foo(1,2,3); # pass three arguments foo(1,2,3); # the same foo(); # pass a null list &foo(); # the same &foo; # foo() get current args, like foo(@_) !! use strict 'subs'; foo; # like foo() iff sub foo predeclared, else # a compile-time error no strict 'subs'; foo; # like foo() iff sub foo predeclared, else # a literal string "foo" Not only does the C<&> form make the argument list optional, it also disables any prototype checking on arguments you do provide. This is partly for historical reasons, and partly for having a convenient way to cheat if you know what you're doing. See L</Prototypes> below. X<&> Since Perl 5.16.0, the C<__SUB__> token is available under C<use feature 'current_sub'> and C<use 5.16.0>. It will evaluate to a reference to the currently-running sub, which allows for recursive calls without knowing your subroutine's name. use 5.16.0; my $factorial = sub { my ($x) = @_; return 1 if $x == 1; return($x * __SUB__->( $x - 1 ) ); }; The behavior of C<__SUB__> within a regex code block (such as C</(?{...})/>) is subject to change. Subroutines whose names are in all upper case are reserved to the Perl core, as are modules whose names are in all lower case. A subroutine in all capitals is a loosely-held convention meaning it will be called indirectly by the run-time system itself, usually due to a triggered event. Subroutines whose name start with a left parenthesis are also reserved the same way. The following is a list of some subroutines that currently do special, pre-defined things. =over =item documented later in this document C<AUTOLOAD> =item documented in L<perlmod> C<CLONE>, C<CLONE_SKIP> =item documented in L<perlobj> C<DESTROY>, C<DOES> =item documented in L<perltie> C<BINMODE>, C<CLEAR>, C<CLOSE>, C<DELETE>, C<DESTROY>, C<EOF>, C<EXISTS>, C<EXTEND>, C<FETCH>, C<FETCHSIZE>, C<FILENO>, C<FIRSTKEY>, C<GETC>, C<NEXTKEY>, C<OPEN>, C<POP>, C<PRINT>, C<PRINTF>, C<PUSH>, C<READ>, C<READLINE>, C<SCALAR>, C<SEEK>, C<SHIFT>, C<SPLICE>, C<STORE>, C<STORESIZE>, C<TELL>, C<TIEARRAY>, C<TIEHANDLE>, C<TIEHASH>, C<TIESCALAR>, C<UNSHIFT>, C<UNTIE>, C<WRITE> =item documented in L<PerlIO::via> C<BINMODE>, C<CLEARERR>, C<CLOSE>, C<EOF>, C<ERROR>, C<FDOPEN>, C<FILENO>, C<FILL>, C<FLUSH>, C<OPEN>, C<POPPED>, C<PUSHED>, C<READ>, C<SEEK>, C<SETLINEBUF>, C<SYSOPEN>, C<TELL>, C<UNREAD>, C<UTF8>, C<WRITE> =item documented in L<perlfunc> L<< C<import> | perlfunc/use >>, L<< C<unimport> | perlfunc/use >>, L<< C<INC> | perlfunc/require >> =item documented in L<UNIVERSAL> C<VERSION> =item documented in L<perldebguts> C<DB::DB>, C<DB::sub>, C<DB::lsub>, C<DB::goto>, C<DB::postponed> =item undocumented, used internally by the L<overload> feature any starting with C<(> =back The C<BEGIN>, C<UNITCHECK>, C<CHECK>, C<INIT> and C<END> subroutines are not so much subroutines as named special code blocks, of which you can have more than one in a package, and which you can B<not> call explicitly. See L<perlmod/"BEGIN, UNITCHECK, CHECK, INIT and END"> =head2 Signatures B<WARNING>: Subroutine signatures are experimental. The feature may be modified or removed in future versions of Perl. Perl has an experimental facility to allow a subroutine's formal parameters to be introduced by special syntax, separate from the procedural code of the subroutine body. The formal parameter list is known as a I<signature>. The facility must be enabled first by a pragmatic declaration, C<use feature 'signatures'>, and it will produce a warning unless the "experimental::signatures" warnings category is disabled. The signature is part of a subroutine's body. Normally the body of a subroutine is simply a braced block of code, but when using a signature, the signature is a parenthesised list that goes immediately before the block, after any name or attributes. For example, sub foo :lvalue ($a, $b = 1, @c) { .... } The signature declares lexical variables that are in scope for the block. When the subroutine is called, the signature takes control first. It populates the signature variables from the list of arguments that were passed. If the argument list doesn't meet the requirements of the signature, then it will throw an exception. When the signature processing is complete, control passes to the block. Positional parameters are handled by simply naming scalar variables in the signature. For example, sub foo ($left, $right) { return $left + $right; } takes two positional parameters, which must be filled at runtime by two arguments. By default the parameters are mandatory, and it is not permitted to pass more arguments than expected. So the above is equivalent to sub foo { die "Too many arguments for subroutine" unless @_ <= 2; die "Too few arguments for subroutine" unless @_ >= 2; my $left = $_[0]; my $right = $_[1]; return $left + $right; } An argument can be ignored by omitting the main part of the name from a parameter declaration, leaving just a bare C<$> sigil. For example, sub foo ($first, $, $third) { return "first=$first, third=$third"; } Although the ignored argument doesn't go into a variable, it is still mandatory for the caller to pass it. A positional parameter is made optional by giving a default value, separated from the parameter name by C<=>: sub foo ($left, $right = 0) { return $left + $right; } The above subroutine may be called with either one or two arguments. The default value expression is evaluated when the subroutine is called, so it may provide different default values for different calls. It is only evaluated if the argument was actually omitted from the call. For example, my $auto_id = 0; sub foo ($thing, $id = $auto_id++) { print "$thing has ID $id"; } automatically assigns distinct sequential IDs to things for which no ID was supplied by the caller. A default value expression may also refer to parameters earlier in the signature, making the default for one parameter vary according to the earlier parameters. For example, sub foo ($first_name, $surname, $nickname = $first_name) { print "$first_name $surname is known as \"$nickname\""; } An optional parameter can be nameless just like a mandatory parameter. For example, sub foo ($thing, $ = 1) { print $thing; } The parameter's default value will still be evaluated if the corresponding argument isn't supplied, even though the value won't be stored anywhere. This is in case evaluating it has important side effects. However, it will be evaluated in void context, so if it doesn't have side effects and is not trivial it will generate a warning if the "void" warning category is enabled. If a nameless optional parameter's default value is not important, it may be omitted just as the parameter's name was: sub foo ($thing, $=) { print $thing; } Optional positional parameters must come after all mandatory positional parameters. (If there are no mandatory positional parameters then an optional positional parameters can be the first thing in the signature.) If there are multiple optional positional parameters and not enough arguments are supplied to fill them all, they will be filled from left to right. After positional parameters, additional arguments may be captured in a slurpy parameter. The simplest form of this is just an array variable: sub foo ($filter, @inputs) { print $filter->($_) foreach @inputs; } With a slurpy parameter in the signature, there is no upper limit on how many arguments may be passed. A slurpy array parameter may be nameless just like a positional parameter, in which case its only effect is to turn off the argument limit that would otherwise apply: sub foo ($thing, @) { print $thing; } A slurpy parameter may instead be a hash, in which case the arguments available to it are interpreted as alternating keys and values. There must be as many keys as values: if there is an odd argument then an exception will be thrown. Keys will be stringified, and if there are duplicates then the later instance takes precedence over the earlier, as with standard hash construction. sub foo ($filter, %inputs) { print $filter->($_, $inputs{$_}) foreach sort keys %inputs; } A slurpy hash parameter may be nameless just like other kinds of parameter. It still insists that the number of arguments available to it be even, even though they're not being put into a variable. sub foo ($thing, %) { print $thing; } A slurpy parameter, either array or hash, must be the last thing in the signature. It may follow mandatory and optional positional parameters; it may also be the only thing in the signature. Slurpy parameters cannot have default values: if no arguments are supplied for them then you get an empty array or empty hash. A signature may be entirely empty, in which case all it does is check that the caller passed no arguments: sub foo () { return 123; } When using a signature, the arguments are still available in the special array variable C<@_>, in addition to the lexical variables of the signature. There is a difference between the two ways of accessing the arguments: C<@_> I<aliases> the arguments, but the signature variables get I<copies> of the arguments. So writing to a signature variable only changes that variable, and has no effect on the caller's variables, but writing to an element of C<@_> modifies whatever the caller used to supply that argument. There is a potential syntactic ambiguity between signatures and prototypes (see L</Prototypes>), because both start with an opening parenthesis and both can appear in some of the same places, such as just after the name in a subroutine declaration. For historical reasons, when signatures are not enabled, any opening parenthesis in such a context will trigger very forgiving prototype parsing. Most signatures will be interpreted as prototypes in those circumstances, but won't be valid prototypes. (A valid prototype cannot contain any alphabetic character.) This will lead to somewhat confusing error messages. To avoid ambiguity, when signatures are enabled the special syntax for prototypes is disabled. There is no attempt to guess whether a parenthesised group was intended to be a prototype or a signature. To give a subroutine a prototype under these circumstances, use a L<prototype attribute|attributes/Built-in Attributes>. For example, sub foo :prototype($) { $_[0] } It is entirely possible for a subroutine to have both a prototype and a signature. They do different jobs: the prototype affects compilation of calls to the subroutine, and the signature puts argument values into lexical variables at runtime. You can therefore write sub foo :prototype($$) ($left, $right) { return $left + $right; } The prototype attribute, and any other attributes, must come before the signature. The signature always immediately precedes the block of the subroutine's body. =head2 Private Variables via my() X<my> X<variable, lexical> X<lexical> X<lexical variable> X<scope, lexical> X<lexical scope> X<attributes, my> Synopsis: my $foo; # declare $foo lexically local my (@wid, %get); # declare list of variables local my $foo = "flurp"; # declare $foo lexical, and init it my @oof = @bar; # declare @oof lexical, and init it my $x : Foo = $y; # similar, with an attribute applied B<WARNING>: The use of attribute lists on C<my> declarations is still evolving. The current semantics and interface are subject to change. See L<attributes> and L<Attribute::Handlers>. The C<my> operator declares the listed variables to be lexically confined to the enclosing block, conditional (C<if>/C<unless>/C<elsif>/C<else>), loop (C<for>/C<foreach>/C<while>/C<until>/C<continue>), subroutine, C<eval>, or C<do>/C<require>/C<use>'d file. If more than one value is listed, the list must be placed in parentheses. All listed elements must be legal lvalues. Only alphanumeric identifiers may be lexically scoped--magical built-ins like C<$/> must currently be C<local>ized with C<local> instead. Unlike dynamic variables created by the C<local> operator, lexical variables declared with C<my> are totally hidden from the outside world, including any called subroutines. This is true if it's the same subroutine called from itself or elsewhere--every call gets its own copy. X<local> This doesn't mean that a C<my> variable declared in a statically enclosing lexical scope would be invisible. Only dynamic scopes are cut off. For example, the C<bumpx()> function below has access to the lexical $x variable because both the C<my> and the C<sub> occurred at the same scope, presumably file scope. my $x = 10; sub bumpx { $x++ } An C<eval()>, however, can see lexical variables of the scope it is being evaluated in, so long as the names aren't hidden by declarations within the C<eval()> itself. See L<perlref>. X<eval, scope of> The parameter list to my() may be assigned to if desired, which allows you to initialize your variables. (If no initializer is given for a particular variable, it is created with the undefined value.) Commonly this is used to name input parameters to a subroutine. Examples: $arg = "fred"; # "global" variable $n = cube_root(27); print "$arg thinks the root is $n\n"; fred thinks the root is 3 sub cube_root { my $arg = shift; # name doesn't matter $arg **= 1/3; return $arg; } The C<my> is simply a modifier on something you might assign to. So when you do assign to variables in its argument list, C<my> doesn't change whether those variables are viewed as a scalar or an array. So my ($foo) = <STDIN>; # WRONG? my @FOO = <STDIN>; both supply a list context to the right-hand side, while my $foo = <STDIN>; supplies a scalar context. But the following declares only one variable: my $foo, $bar = 1; # WRONG That has the same effect as my $foo; $bar = 1; The declared variable is not introduced (is not visible) until after the current statement. Thus, my $x = $x; can be used to initialize a new $x with the value of the old $x, and the expression my $x = 123 and $x == 123 is false unless the old $x happened to have the value C<123>. Lexical scopes of control structures are not bounded precisely by the braces that delimit their controlled blocks; control expressions are part of that scope, too. Thus in the loop while (my $line = <>) { $line = lc $line; } continue { print $line; } the scope of $line extends from its declaration throughout the rest of the loop construct (including the C<continue> clause), but not beyond it. Similarly, in the conditional if ((my $answer = <STDIN>) =~ /^yes$/i) { user_agrees(); } elsif ($answer =~ /^no$/i) { user_disagrees(); } else { chomp $answer; die "'$answer' is neither 'yes' nor 'no'"; } the scope of $answer extends from its declaration through the rest of that conditional, including any C<elsif> and C<else> clauses, but not beyond it. See L<perlsyn/"Simple Statements"> for information on the scope of variables in statements with modifiers. The C<foreach> loop defaults to scoping its index variable dynamically in the manner of C<local>. However, if the index variable is prefixed with the keyword C<my>, or if there is already a lexical by that name in scope, then a new lexical is created instead. Thus in the loop X<foreach> X<for> for my $i (1, 2, 3) { some_function(); } the scope of $i extends to the end of the loop, but not beyond it, rendering the value of $i inaccessible within C<some_function()>. X<foreach> X<for> Some users may wish to encourage the use of lexically scoped variables. As an aid to catching implicit uses to package variables, which are always global, if you say use strict 'vars'; then any variable mentioned from there to the end of the enclosing block must either refer to a lexical variable, be predeclared via C<our> or C<use vars>, or else must be fully qualified with the package name. A compilation error results otherwise. An inner block may countermand this with C<no strict 'vars'>. A C<my> has both a compile-time and a run-time effect. At compile time, the compiler takes notice of it. The principal usefulness of this is to quiet C<use strict 'vars'>, but it is also essential for generation of closures as detailed in L<perlref>. Actual initialization is delayed until run time, though, so it gets executed at the appropriate time, such as each time through a loop, for example. Variables declared with C<my> are not part of any package and are therefore never fully qualified with the package name. In particular, you're not allowed to try to make a package variable (or other global) lexical: my $pack::var; # ERROR! Illegal syntax In fact, a dynamic variable (also known as package or global variables) are still accessible using the fully qualified C<::> notation even while a lexical of the same name is also visible: package main; local $x = 10; my $x = 20; print "$x and $::x\n"; That will print out C<20> and C<10>. You may declare C<my> variables at the outermost scope of a file to hide any such identifiers from the world outside that file. This is similar in spirit to C's static variables when they are used at the file level. To do this with a subroutine requires the use of a closure (an anonymous function that accesses enclosing lexicals). If you want to create a private subroutine that cannot be called from outside that block, it can declare a lexical variable containing an anonymous sub reference: my $secret_version = '1.001-beta'; my $secret_sub = sub { print $secret_version }; &$secret_sub(); As long as the reference is never returned by any function within the module, no outside module can see the subroutine, because its name is not in any package's symbol table. Remember that it's not I<REALLY> called C<$some_pack::secret_version> or anything; it's just $secret_version, unqualified and unqualifiable. This does not work with object methods, however; all object methods have to be in the symbol table of some package to be found. See L<perlref/"Function Templates"> for something of a work-around to this. =head2 Persistent Private Variables X<state> X<state variable> X<static> X<variable, persistent> X<variable, static> X<closure> There are two ways to build persistent private variables in Perl 5.10. First, you can simply use the C<state> feature. Or, you can use closures, if you want to stay compatible with releases older than 5.10. =head3 Persistent variables via state() Beginning with Perl 5.10.0, you can declare variables with the C<state> keyword in place of C<my>. For that to work, though, you must have enabled that feature beforehand, either by using the C<feature> pragma, or by using C<-E> on one-liners (see L<feature>). Beginning with Perl 5.16, the C<CORE::state> form does not require the C<feature> pragma. The C<state> keyword creates a lexical variable (following the same scoping rules as C<my>) that persists from one subroutine call to the next. If a state variable resides inside an anonymous subroutine, then each copy of the subroutine has its own copy of the state variable. However, the value of the state variable will still persist between calls to the same copy of the anonymous subroutine. (Don't forget that C<sub { ... }> creates a new subroutine each time it is executed.) For example, the following code maintains a private counter, incremented each time the gimme_another() function is called: use feature 'state'; sub gimme_another { state $x; return ++$x } And this example uses anonymous subroutines to create separate counters: use feature 'state'; sub create_counter { return sub { state $x; return ++$x } } Also, since C<$x> is lexical, it can't be reached or modified by any Perl code outside. When combined with variable declaration, simple assignment to C<state> variables (as in C<state $x = 42>) is executed only the first time. When such statements are evaluated subsequent times, the assignment is ignored. The behavior of assignment to C<state> declarations where the left hand side of the assignment involves any parentheses is currently undefined. =head3 Persistent variables with closures Just because a lexical variable is lexically (also called statically) scoped to its enclosing block, C<eval>, or C<do> FILE, this doesn't mean that within a function it works like a C static. It normally works more like a C auto, but with implicit garbage collection. Unlike local variables in C or C++, Perl's lexical variables don't necessarily get recycled just because their scope has exited. If something more permanent is still aware of the lexical, it will stick around. So long as something else references a lexical, that lexical won't be freed--which is as it should be. You wouldn't want memory being free until you were done using it, or kept around once you were done. Automatic garbage collection takes care of this for you. This means that you can pass back or save away references to lexical variables, whereas to return a pointer to a C auto is a grave error. It also gives us a way to simulate C's function statics. Here's a mechanism for giving a function private variables with both lexical scoping and a static lifetime. If you do want to create something like C's static variables, just enclose the whole function in an extra block, and put the static variable outside the function but in the block. { my $secret_val = 0; sub gimme_another { return ++$secret_val; } } # $secret_val now becomes unreachable by the outside # world, but retains its value between calls to gimme_another If this function is being sourced in from a separate file via C<require> or C<use>, then this is probably just fine. If it's all in the main program, you'll need to arrange for the C<my> to be executed early, either by putting the whole block above your main program, or more likely, placing merely a C<BEGIN> code block around it to make sure it gets executed before your program starts to run: BEGIN { my $secret_val = 0; sub gimme_another { return ++$secret_val; } } See L<perlmod/"BEGIN, UNITCHECK, CHECK, INIT and END"> about the special triggered code blocks, C<BEGIN>, C<UNITCHECK>, C<CHECK>, C<INIT> and C<END>. If declared at the outermost scope (the file scope), then lexicals work somewhat like C's file statics. They are available to all functions in that same file declared below them, but are inaccessible from outside that file. This strategy is sometimes used in modules to create private variables that the whole module can see. =head2 Temporary Values via local() X<local> X<scope, dynamic> X<dynamic scope> X<variable, local> X<variable, temporary> B<WARNING>: In general, you should be using C<my> instead of C<local>, because it's faster and safer. Exceptions to this include the global punctuation variables, global filehandles and formats, and direct manipulation of the Perl symbol table itself. C<local> is mostly used when the current value of a variable must be visible to called subroutines. Synopsis: # localization of values local $foo; # make $foo dynamically local local (@wid, %get); # make list of variables local local $foo = "flurp"; # make $foo dynamic, and init it local @oof = @bar; # make @oof dynamic, and init it local $hash{key} = "val"; # sets a local value for this hash entry delete local $hash{key}; # delete this entry for the current block local ($cond ? $v1 : $v2); # several types of lvalues support # localization # localization of symbols local *FH; # localize $FH, @FH, %FH, &FH ... local *merlyn = *randal; # now $merlyn is really $randal, plus # @merlyn is really @randal, etc local *merlyn = 'randal'; # SAME THING: promote 'randal' to *randal local *merlyn = \$randal; # just alias $merlyn, not @merlyn etc A C<local> modifies its listed variables to be "local" to the enclosing block, C<eval>, or C<do FILE>--and to I<any subroutine called from within that block>. A C<local> just gives temporary values to global (meaning package) variables. It does I<not> create a local variable. This is known as dynamic scoping. Lexical scoping is done with C<my>, which works more like C's auto declarations. Some types of lvalues can be localized as well: hash and array elements and slices, conditionals (provided that their result is always localizable), and symbolic references. As for simple variables, this creates new, dynamically scoped values. If more than one variable or expression is given to C<local>, they must be placed in parentheses. This operator works by saving the current values of those variables in its argument list on a hidden stack and restoring them upon exiting the block, subroutine, or eval. This means that called subroutines can also reference the local variable, but not the global one. The argument list may be assigned to if desired, which allows you to initialize your local variables. (If no initializer is given for a particular variable, it is created with an undefined value.) Because C<local> is a run-time operator, it gets executed each time through a loop. Consequently, it's more efficient to localize your variables outside the loop. =head3 Grammatical note on local() X<local, context> A C<local> is simply a modifier on an lvalue expression. When you assign to a C<local>ized variable, the C<local> doesn't change whether its list is viewed as a scalar or an array. So local($foo) = <STDIN>; local @FOO = <STDIN>; both supply a list context to the right-hand side, while local $foo = <STDIN>; supplies a scalar context. =head3 Localization of special variables X<local, special variable> If you localize a special variable, you'll be giving a new value to it, but its magic won't go away. That means that all side-effects related to this magic still work with the localized value. This feature allows code like this to work : # Read the whole contents of FILE in $slurp { local $/ = undef; $slurp = <FILE>; } Note, however, that this restricts localization of some values ; for example, the following statement dies, as of perl 5.10.0, with an error I<Modification of a read-only value attempted>, because the $1 variable is magical and read-only : local $1 = 2; One exception is the default scalar variable: starting with perl 5.14 C<local($_)> will always strip all magic from $_, to make it possible to safely reuse $_ in a subroutine. B<WARNING>: Localization of tied arrays and hashes does not currently work as described. This will be fixed in a future release of Perl; in the meantime, avoid code that relies on any particular behavior of localising tied arrays or hashes (localising individual elements is still okay). See L<perl58delta/"Localising Tied Arrays and Hashes Is Broken"> for more details. X<local, tie> =head3 Localization of globs X<local, glob> X<glob> The construct local *name; creates a whole new symbol table entry for the glob C<name> in the current package. That means that all variables in its glob slot ($name, @name, %name, &name, and the C<name> filehandle) are dynamically reset. This implies, among other things, that any magic eventually carried by those variables is locally lost. In other words, saying C<local */> will not have any effect on the internal value of the input record separator. =head3 Localization of elements of composite types X<local, composite type element> X<local, array element> X<local, hash element> It's also worth taking a moment to explain what happens when you C<local>ize a member of a composite type (i.e. an array or hash element). In this case, the element is C<local>ized I<by name>. This means that when the scope of the C<local()> ends, the saved value will be restored to the hash element whose key was named in the C<local()>, or the array element whose index was named in the C<local()>. If that element was deleted while the C<local()> was in effect (e.g. by a C<delete()> from a hash or a C<shift()> of an array), it will spring back into existence, possibly extending an array and filling in the skipped elements with C<undef>. For instance, if you say %hash = ( 'This' => 'is', 'a' => 'test' ); @ary = ( 0..5 ); { local($ary[5]) = 6; local($hash{'a'}) = 'drill'; while (my $e = pop(@ary)) { print "$e . . .\n"; last unless $e > 3; } if (@ary) { $hash{'only a'} = 'test'; delete $hash{'a'}; } } print join(' ', map { "$_ $hash{$_}" } sort keys %hash),".\n"; print "The array has ",scalar(@ary)," elements: ", join(', ', map { defined $_ ? $_ : 'undef' } @ary),"\n"; Perl will print 6 . . . 4 . . . 3 . . . This is a test only a test. The array has 6 elements: 0, 1, 2, undef, undef, 5 The behavior of local() on non-existent members of composite types is subject to change in future. The behavior of local() on array elements specified using negative indexes is particularly surprising, and is very likely to change. =head3 Localized deletion of elements of composite types X<delete> X<local, composite type element> X<local, array element> X<local, hash element> You can use the C<delete local $array[$idx]> and C<delete local $hash{key}> constructs to delete a composite type entry for the current block and restore it when it ends. They return the array/hash value before the localization, which means that they are respectively equivalent to do { my $val = $array[$idx]; local $array[$idx]; delete $array[$idx]; $val } and do { my $val = $hash{key}; local $hash{key}; delete $hash{key}; $val } except that for those the C<local> is scoped to the C<do> block. Slices are also accepted. my %hash = ( a => [ 7, 8, 9 ], b => 1, ) { my $a = delete local $hash{a}; # $a is [ 7, 8, 9 ] # %hash is (b => 1) { my @nums = delete local @$a[0, 2] # @nums is (7, 9) # $a is [ undef, 8 ] $a[0] = 999; # will be erased when the scope ends } # $a is back to [ 7, 8, 9 ] } # %hash is back to its original state =head2 Lvalue subroutines X<lvalue> X<subroutine, lvalue> It is possible to return a modifiable value from a subroutine. To do this, you have to declare the subroutine to return an lvalue. my $val; sub canmod : lvalue { $val; # or: return $val; } sub nomod { $val; } canmod() = 5; # assigns to $val nomod() = 5; # ERROR The scalar/list context for the subroutine and for the right-hand side of assignment is determined as if the subroutine call is replaced by a scalar. For example, consider: data(2,3) = get_data(3,4); Both subroutines here are called in a scalar context, while in: (data(2,3)) = get_data(3,4); and in: (data(2),data(3)) = get_data(3,4); all the subroutines are called in a list context. Lvalue subroutines are convenient, but you have to keep in mind that, when used with objects, they may violate encapsulation. A normal mutator can check the supplied argument before setting the attribute it is protecting, an lvalue subroutine cannot. If you require any special processing when storing and retrieving the values, consider using the CPAN module Sentinel or something similar. =head2 Lexical Subroutines X<my sub> X<state sub> X<our sub> X<subroutine, lexical> Beginning with Perl 5.18, you can declare a private subroutine with C<my> or C<state>. As with state variables, the C<state> keyword is only available under C<use feature 'state'> or C<use 5.010> or higher. Prior to Perl 5.26, lexical subroutines were deemed experimental and were available only under the C<use feature 'lexical_subs'> pragma. They also produced a warning unless the "experimental::lexical_subs" warnings category was disabled. These subroutines are only visible within the block in which they are declared, and only after that declaration: # Include these two lines if your code is intended to run under Perl # versions earlier than 5.26. no warnings "experimental::lexical_subs"; use feature 'lexical_subs'; foo(); # calls the package/global subroutine state sub foo { foo(); # also calls the package subroutine } foo(); # calls "state" sub my $ref = \&foo; # take a reference to "state" sub my sub bar { ... } bar(); # calls "my" sub You can't (directly) write a recursive lexical subroutine: # WRONG my sub baz { baz(); } This example fails because C<baz()> refers to the package/global subroutine C<baz>, not the lexical subroutine currently being defined. The solution is to use L<C<__SUB__>|perlfunc/__SUB__>: my sub baz { __SUB__->(); # calls itself } It is possible to predeclare a lexical subroutine. The C<sub foo {...}> subroutine definition syntax respects any previous C<my sub;> or C<state sub;> declaration. Using this to define recursive subroutines is a bad idea, however: my sub baz; # predeclaration sub baz { # define the "my" sub baz(); # WRONG: calls itself, but leaks memory } Just like C<< my $f; $f = sub { $f->() } >>, this example leaks memory. The name C<baz> is a reference to the subroutine, and the subroutine uses the name C<baz>; they keep each other alive (see L<perlref/Circular References>). =head3 C<state sub> vs C<my sub> What is the difference between "state" subs and "my" subs? Each time that execution enters a block when "my" subs are declared, a new copy of each sub is created. "State" subroutines persist from one execution of the containing block to the next. So, in general, "state" subroutines are faster. But "my" subs are necessary if you want to create closures: sub whatever { my $x = shift; my sub inner { ... do something with $x ... } inner(); } In this example, a new C<$x> is created when C<whatever> is called, and also a new C<inner>, which can see the new C<$x>. A "state" sub will only see the C<$x> from the first call to C<whatever>. =head3 C<our> subroutines Like C<our $variable>, C<our sub> creates a lexical alias to the package subroutine of the same name. The two main uses for this are to switch back to using the package sub inside an inner scope: sub foo { ... } sub bar { my sub foo { ... } { # need to use the outer foo here our sub foo; foo(); } } and to make a subroutine visible to other packages in the same scope: package MySneakyModule; our sub do_something { ... } sub do_something_with_caller { package DB; () = caller 1; # sets @DB::args do_something(@args); # uses MySneakyModule::do_something } =head2 Passing Symbol Table Entries (typeglobs) X<typeglob> X<*> B<WARNING>: The mechanism described in this section was originally the only way to simulate pass-by-reference in older versions of Perl. While it still works fine in modern versions, the new reference mechanism is generally easier to work with. See below. Sometimes you don't want to pass the value of an array to a subroutine but rather the name of it, so that the subroutine can modify the global copy of it rather than working with a local copy. In perl you can refer to all objects of a particular name by prefixing the name with a star: C<*foo>. This is often known as a "typeglob", because the star on the front can be thought of as a wildcard match for all the funny prefix characters on variables and subroutines and such. When evaluated, the typeglob produces a scalar value that represents all the objects of that name, including any filehandle, format, or subroutine. When assigned to, it causes the name mentioned to refer to whatever C<*> value was assigned to it. Example: sub doubleary { local(*someary) = @_; foreach $elem (@someary) { $elem *= 2; } } doubleary(*foo); doubleary(*bar); Scalars are already passed by reference, so you can modify scalar arguments without using this mechanism by referring explicitly to C<$_[0]> etc. You can modify all the elements of an array by passing all the elements as scalars, but you have to use the C<*> mechanism (or the equivalent reference mechanism) to C<push>, C<pop>, or change the size of an array. It will certainly be faster to pass the typeglob (or reference). Even if you don't want to modify an array, this mechanism is useful for passing multiple arrays in a single LIST, because normally the LIST mechanism will merge all the array values so that you can't extract out the individual arrays. For more on typeglobs, see L<perldata/"Typeglobs and Filehandles">. =head2 When to Still Use local() X<local> X<variable, local> Despite the existence of C<my>, there are still three places where the C<local> operator still shines. In fact, in these three places, you I<must> use C<local> instead of C<my>. =over 4 =item 1. You need to give a global variable a temporary value, especially $_. The global variables, like C<@ARGV> or the punctuation variables, must be C<local>ized with C<local()>. This block reads in F</etc/motd>, and splits it up into chunks separated by lines of equal signs, which are placed in C<@Fields>. { local @ARGV = ("/etc/motd"); local $/ = undef; local $_ = <>; @Fields = split /^\s*=+\s*$/; } It particular, it's important to C<local>ize $_ in any routine that assigns to it. Look out for implicit assignments in C<while> conditionals. =item 2. You need to create a local file or directory handle or a local function. A function that needs a filehandle of its own must use C<local()> on a complete typeglob. This can be used to create new symbol table entries: sub ioqueue { local (*READER, *WRITER); # not my! pipe (READER, WRITER) or die "pipe: $!"; return (*READER, *WRITER); } ($head, $tail) = ioqueue(); See the Symbol module for a way to create anonymous symbol table entries. Because assignment of a reference to a typeglob creates an alias, this can be used to create what is effectively a local function, or at least, a local alias. { local *grow = \&shrink; # only until this block exits grow(); # really calls shrink() move(); # if move() grow()s, it shrink()s too } grow(); # get the real grow() again See L<perlref/"Function Templates"> for more about manipulating functions by name in this way. =item 3. You want to temporarily change just one element of an array or hash. You can C<local>ize just one element of an aggregate. Usually this is done on dynamics: { local $SIG{INT} = 'IGNORE'; funct(); # uninterruptible } # interruptibility automatically restored here But it also works on lexically declared aggregates. =back =head2 Pass by Reference X<pass by reference> X<pass-by-reference> X<reference> If you want to pass more than one array or hash into a function--or return them from it--and have them maintain their integrity, then you're going to have to use an explicit pass-by-reference. Before you do that, you need to understand references as detailed in L<perlref>. This section may not make much sense to you otherwise. Here are a few simple examples. First, let's pass in several arrays to a function and have it C<pop> all of then, returning a new list of all their former last elements: @tailings = popmany ( \@a, \@b, \@c, \@d ); sub popmany { my $aref; my @retlist; foreach $aref ( @_ ) { push @retlist, pop @$aref; } return @retlist; } Here's how you might write a function that returns a list of keys occurring in all the hashes passed to it: @common = inter( \%foo, \%bar, \%joe ); sub inter { my ($k, $href, %seen); # locals foreach $href (@_) { while ( $k = each %$href ) { $seen{$k}++; } } return grep { $seen{$_} == @_ } keys %seen; } So far, we're using just the normal list return mechanism. What happens if you want to pass or return a hash? Well, if you're using only one of them, or you don't mind them concatenating, then the normal calling convention is ok, although a little expensive. Where people get into trouble is here: (@a, @b) = func(@c, @d); or (%a, %b) = func(%c, %d); That syntax simply won't work. It sets just C<@a> or C<%a> and clears the C<@b> or C<%b>. Plus the function didn't get passed into two separate arrays or hashes: it got one long list in C<@_>, as always. If you can arrange for everyone to deal with this through references, it's cleaner code, although not so nice to look at. Here's a function that takes two array references as arguments, returning the two array elements in order of how many elements they have in them: ($aref, $bref) = func(\@c, \@d); print "@$aref has more than @$bref\n"; sub func { my ($cref, $dref) = @_; if (@$cref > @$dref) { return ($cref, $dref); } else { return ($dref, $cref); } } It turns out that you can actually do this also: (*a, *b) = func(\@c, \@d); print "@a has more than @b\n"; sub func { local (*c, *d) = @_; if (@c > @d) { return (\@c, \@d); } else { return (\@d, \@c); } } Here we're using the typeglobs to do symbol table aliasing. It's a tad subtle, though, and also won't work if you're using C<my> variables, because only globals (even in disguise as C<local>s) are in the symbol table. If you're passing around filehandles, you could usually just use the bare typeglob, like C<*STDOUT>, but typeglobs references work, too. For example: splutter(\*STDOUT); sub splutter { my $fh = shift; print $fh "her um well a hmmm\n"; } $rec = get_rec(\*STDIN); sub get_rec { my $fh = shift; return scalar <$fh>; } If you're planning on generating new filehandles, you could do this. Notice to pass back just the bare *FH, not its reference. sub openit { my $path = shift; local *FH; return open (FH, $path) ? *FH : undef; } =head2 Prototypes X<prototype> X<subroutine, prototype> Perl supports a very limited kind of compile-time argument checking using function prototyping. This can be declared in either the PROTO section or with a L<prototype attribute|attributes/Built-in Attributes>. If you declare either of sub mypush (\@@) sub mypush :prototype(\@@) then C<mypush()> takes arguments exactly like C<push()> does. If subroutine signatures are enabled (see L</Signatures>), then the shorter PROTO syntax is unavailable, because it would clash with signatures. In that case, a prototype can only be declared in the form of an attribute. The function declaration must be visible at compile time. The prototype affects only interpretation of new-style calls to the function, where new-style is defined as not using the C<&> character. In other words, if you call it like a built-in function, then it behaves like a built-in function. If you call it like an old-fashioned subroutine, then it behaves like an old-fashioned subroutine. It naturally falls out from this rule that prototypes have no influence on subroutine references like C<\&foo> or on indirect subroutine calls like C<&{$subref}> or C<< $subref->() >>. Method calls are not influenced by prototypes either, because the function to be called is indeterminate at compile time, since the exact code called depends on inheritance. Because the intent of this feature is primarily to let you define subroutines that work like built-in functions, here are prototypes for some other functions that parse almost exactly like the corresponding built-in. Declared as Called as sub mylink ($$) mylink $old, $new sub myvec ($$$) myvec $var, $offset, 1 sub myindex ($$;$) myindex &getstring, "substr" sub mysyswrite ($$$;$) mysyswrite $buf, 0, length($buf) - $off, $off sub myreverse (@) myreverse $a, $b, $c sub myjoin ($@) myjoin ":", $a, $b, $c sub mypop (\@) mypop @array sub mysplice (\@$$@) mysplice @array, 0, 2, @pushme sub mykeys (\[%@]) mykeys %{$hashref} sub myopen (*;$) myopen HANDLE, $name sub mypipe (**) mypipe READHANDLE, WRITEHANDLE sub mygrep (&@) mygrep { /foo/ } $a, $b, $c sub myrand (;$) myrand 42 sub mytime () mytime Any backslashed prototype character represents an actual argument that must start with that character (optionally preceded by C<my>, C<our> or C<local>), with the exception of C<$>, which will accept any scalar lvalue expression, such as C<$foo = 7> or C<< my_function()->[0] >>. The value passed as part of C<@_> will be a reference to the actual argument given in the subroutine call, obtained by applying C<\> to that argument. You can use the C<\[]> backslash group notation to specify more than one allowed argument type. For example: sub myref (\[$@%&*]) will allow calling myref() as myref $var myref @array myref %hash myref &sub myref *glob and the first argument of myref() will be a reference to a scalar, an array, a hash, a code, or a glob. Unbackslashed prototype characters have special meanings. Any unbackslashed C<@> or C<%> eats all remaining arguments, and forces list context. An argument represented by C<$> forces scalar context. An C<&> requires an anonymous subroutine, which, if passed as the first argument, does not require the C<sub> keyword or a subsequent comma. A C<*> allows the subroutine to accept a bareword, constant, scalar expression, typeglob, or a reference to a typeglob in that slot. The value will be available to the subroutine either as a simple scalar, or (in the latter two cases) as a reference to the typeglob. If you wish to always convert such arguments to a typeglob reference, use Symbol::qualify_to_ref() as follows: use Symbol 'qualify_to_ref'; sub foo (*) { my $fh = qualify_to_ref(shift, caller); ... } The C<+> prototype is a special alternative to C<$> that will act like C<\[@%]> when given a literal array or hash variable, but will otherwise force scalar context on the argument. This is useful for functions which should accept either a literal array or an array reference as the argument: sub mypush (+@) { my $aref = shift; die "Not an array or arrayref" unless ref $aref eq 'ARRAY'; push @$aref, @_; } When using the C<+> prototype, your function must check that the argument is of an acceptable type. A semicolon (C<;>) separates mandatory arguments from optional arguments. It is redundant before C<@> or C<%>, which gobble up everything else. As the last character of a prototype, or just before a semicolon, a C<@> or a C<%>, you can use C<_> in place of C<$>: if this argument is not provided, C<$_> will be used instead. Note how the last three examples in the table above are treated specially by the parser. C<mygrep()> is parsed as a true list operator, C<myrand()> is parsed as a true unary operator with unary precedence the same as C<rand()>, and C<mytime()> is truly without arguments, just like C<time()>. That is, if you say mytime +2; you'll get C<mytime() + 2>, not C<mytime(2)>, which is how it would be parsed without a prototype. If you want to force a unary function to have the same precedence as a list operator, add C<;> to the end of the prototype: sub mygetprotobynumber($;); mygetprotobynumber $a > $b; # parsed as mygetprotobynumber($a > $b) The interesting thing about C<&> is that you can generate new syntax with it, provided it's in the initial position: X<&> sub try (&@) { my($try,$catch) = @_; eval { &$try }; if ($@) { local $_ = $@; &$catch; } } sub catch (&) { $_[0] } try { die "phooey"; } catch { /phooey/ and print "unphooey\n"; }; That prints C<"unphooey">. (Yes, there are still unresolved issues having to do with visibility of C<@_>. I'm ignoring that question for the moment. (But note that if we make C<@_> lexically scoped, those anonymous subroutines can act like closures... (Gee, is this sounding a little Lispish? (Never mind.)))) And here's a reimplementation of the Perl C<grep> operator: X<grep> sub mygrep (&@) { my $code = shift; my @result; foreach $_ (@_) { push(@result, $_) if &$code; } @result; } Some folks would prefer full alphanumeric prototypes. Alphanumerics have been intentionally left out of prototypes for the express purpose of someday in the future adding named, formal parameters. The current mechanism's main goal is to let module writers provide better diagnostics for module users. Larry feels the notation quite understandable to Perl programmers, and that it will not intrude greatly upon the meat of the module, nor make it harder to read. The line noise is visually encapsulated into a small pill that's easy to swallow. If you try to use an alphanumeric sequence in a prototype you will generate an optional warning - "Illegal character in prototype...". Unfortunately earlier versions of Perl allowed the prototype to be used as long as its prefix was a valid prototype. The warning may be upgraded to a fatal error in a future version of Perl once the majority of offending code is fixed. It's probably best to prototype new functions, not retrofit prototyping into older ones. That's because you must be especially careful about silent impositions of differing list versus scalar contexts. For example, if you decide that a function should take just one parameter, like this: sub func ($) { my $n = shift; print "you gave me $n\n"; } and someone has been calling it with an array or expression returning a list: func(@foo); func( $text =~ /\w+/g ); Then you've just supplied an automatic C<scalar> in front of their argument, which can be more than a bit surprising. The old C<@foo> which used to hold one thing doesn't get passed in. Instead, C<func()> now gets passed in a C<1>; that is, the number of elements in C<@foo>. And the C<m//g> gets called in scalar context so instead of a list of words it returns a boolean result and advances C<pos($text)>. Ouch! If a sub has both a PROTO and a BLOCK, the prototype is not applied until after the BLOCK is completely defined. This means that a recursive function with a prototype has to be predeclared for the prototype to take effect, like so: sub foo($$); sub foo($$) { foo 1, 2; } This is all very powerful, of course, and should be used only in moderation to make the world a better place. =head2 Constant Functions X<constant> Functions with a prototype of C<()> are potential candidates for inlining. If the result after optimization and constant folding is either a constant or a lexically-scoped scalar which has no other references, then it will be used in place of function calls made without C<&>. Calls made using C<&> are never inlined. (See F<constant.pm> for an easy way to declare most constants.) The following functions would all be inlined: sub pi () { 3.14159 } # Not exact, but close. sub PI () { 4 * atan2 1, 1 } # As good as it gets, # and it's inlined, too! sub ST_DEV () { 0 } sub ST_INO () { 1 } sub FLAG_FOO () { 1 << 8 } sub FLAG_BAR () { 1 << 9 } sub FLAG_MASK () { FLAG_FOO | FLAG_BAR } sub OPT_BAZ () { not (0x1B58 & FLAG_MASK) } sub N () { int(OPT_BAZ) / 3 } sub FOO_SET () { 1 if FLAG_MASK & FLAG_FOO } sub FOO_SET2 () { if (FLAG_MASK & FLAG_FOO) { 1 } } (Be aware that the last example was not always inlined in Perl 5.20 and earlier, which did not behave consistently with subroutines containing inner scopes.) You can countermand inlining by using an explicit C<return>: sub baz_val () { if (OPT_BAZ) { return 23; } else { return 42; } } sub bonk_val () { return 12345 } As alluded to earlier you can also declare inlined subs dynamically at BEGIN time if their body consists of a lexically-scoped scalar which has no other references. Only the first example here will be inlined: BEGIN { my $var = 1; no strict 'refs'; *INLINED = sub () { $var }; } BEGIN { my $var = 1; my $ref = \$var; no strict 'refs'; *NOT_INLINED = sub () { $var }; } A not so obvious caveat with this (see [RT #79908]) is that the variable will be immediately inlined, and will stop behaving like a normal lexical variable, e.g. this will print C<79907>, not C<79908>: BEGIN { my $x = 79907; *RT_79908 = sub () { $x }; $x++; } print RT_79908(); # prints 79907 As of Perl 5.22, this buggy behavior, while preserved for backward compatibility, is detected and emits a deprecation warning. If you want the subroutine to be inlined (with no warning), make sure the variable is not used in a context where it could be modified aside from where it is declared. # Fine, no warning BEGIN { my $x = 54321; *INLINED = sub () { $x }; } # Warns. Future Perl versions will stop inlining it. BEGIN { my $x; $x = 54321; *ALSO_INLINED = sub () { $x }; } Perl 5.22 also introduces the experimental "const" attribute as an alternative. (Disable the "experimental::const_attr" warnings if you want to use it.) When applied to an anonymous subroutine, it forces the sub to be called when the C<sub> expression is evaluated. The return value is captured and turned into a constant subroutine: my $x = 54321; *INLINED = sub : const { $x }; $x++; The return value of C<INLINED> in this example will always be 54321, regardless of later modifications to $x. You can also put any arbitrary code inside the sub, at it will be executed immediately and its return value captured the same way. If you really want a subroutine with a C<()> prototype that returns a lexical variable you can easily force it to not be inlined by adding an explicit C<return>: BEGIN { my $x = 79907; *RT_79908 = sub () { return $x }; $x++; } print RT_79908(); # prints 79908 The easiest way to tell if a subroutine was inlined is by using L<B::Deparse>. Consider this example of two subroutines returning C<1>, one with a C<()> prototype causing it to be inlined, and one without (with deparse output truncated for clarity): $ perl -MO=Deparse -le 'sub ONE { 1 } if (ONE) { print ONE if ONE }' sub ONE { 1; } if (ONE ) { print ONE() if ONE ; } $ perl -MO=Deparse -le 'sub ONE () { 1 } if (ONE) { print ONE if ONE }' sub ONE () { 1 } do { print 1 }; If you redefine a subroutine that was eligible for inlining, you'll get a warning by default. You can use this warning to tell whether or not a particular subroutine is considered inlinable, since it's different than the warning for overriding non-inlined subroutines: $ perl -e 'sub one () {1} sub one () {2}' Constant subroutine one redefined at -e line 1. $ perl -we 'sub one {1} sub one {2}' Subroutine one redefined at -e line 1. The warning is considered severe enough not to be affected by the B<-w> switch (or its absence) because previously compiled invocations of the function will still be using the old value of the function. If you need to be able to redefine the subroutine, you need to ensure that it isn't inlined, either by dropping the C<()> prototype (which changes calling semantics, so beware) or by thwarting the inlining mechanism in some other way, e.g. by adding an explicit C<return>, as mentioned above: sub not_inlined () { return 23 } =head2 Overriding Built-in Functions X<built-in> X<override> X<CORE> X<CORE::GLOBAL> Many built-in functions may be overridden, though this should be tried only occasionally and for good reason. Typically this might be done by a package attempting to emulate missing built-in functionality on a non-Unix system. Overriding may be done only by importing the name from a module at compile time--ordinary predeclaration isn't good enough. However, the C<use subs> pragma lets you, in effect, predeclare subs via the import syntax, and these names may then override built-in ones: use subs 'chdir', 'chroot', 'chmod', 'chown'; chdir $somewhere; sub chdir { ... } To unambiguously refer to the built-in form, precede the built-in name with the special package qualifier C<CORE::>. For example, saying C<CORE::open()> always refers to the built-in C<open()>, even if the current package has imported some other subroutine called C<&open()> from elsewhere. Even though it looks like a regular function call, it isn't: the CORE:: prefix in that case is part of Perl's syntax, and works for any keyword, regardless of what is in the CORE package. Taking a reference to it, that is, C<\&CORE::open>, only works for some keywords. See L<CORE>. Library modules should not in general export built-in names like C<open> or C<chdir> as part of their default C<@EXPORT> list, because these may sneak into someone else's namespace and change the semantics unexpectedly. Instead, if the module adds that name to C<@EXPORT_OK>, then it's possible for a user to import the name explicitly, but not implicitly. That is, they could say use Module 'open'; and it would import the C<open> override. But if they said use Module; they would get the default imports without overrides. The foregoing mechanism for overriding built-in is restricted, quite deliberately, to the package that requests the import. There is a second method that is sometimes applicable when you wish to override a built-in everywhere, without regard to namespace boundaries. This is achieved by importing a sub into the special namespace C<CORE::GLOBAL::>. Here is an example that quite brazenly replaces the C<glob> operator with something that understands regular expressions. package REGlob; require Exporter; @ISA = 'Exporter'; @EXPORT_OK = 'glob'; sub import { my $pkg = shift; return unless @_; my $sym = shift; my $where = ($sym =~ s/^GLOBAL_// ? 'CORE::GLOBAL' : caller(0)); $pkg->export($where, $sym, @_); } sub glob { my $pat = shift; my @got; if (opendir my $d, '.') { @got = grep /$pat/, readdir $d; closedir $d; } return @got; } 1; And here's how it could be (ab)used: #use REGlob 'GLOBAL_glob'; # override glob() in ALL namespaces package Foo; use REGlob 'glob'; # override glob() in Foo:: only print for <^[a-z_]+\.pm\$>; # show all pragmatic modules The initial comment shows a contrived, even dangerous example. By overriding C<glob> globally, you would be forcing the new (and subversive) behavior for the C<glob> operator for I<every> namespace, without the complete cognizance or cooperation of the modules that own those namespaces. Naturally, this should be done with extreme caution--if it must be done at all. The C<REGlob> example above does not implement all the support needed to cleanly override perl's C<glob> operator. The built-in C<glob> has different behaviors depending on whether it appears in a scalar or list context, but our C<REGlob> doesn't. Indeed, many perl built-in have such context sensitive behaviors, and these must be adequately supported by a properly written override. For a fully functional example of overriding C<glob>, study the implementation of C<File::DosGlob> in the standard library. When you override a built-in, your replacement should be consistent (if possible) with the built-in native syntax. You can achieve this by using a suitable prototype. To get the prototype of an overridable built-in, use the C<prototype> function with an argument of C<"CORE::builtin_name"> (see L<perlfunc/prototype>). Note however that some built-ins can't have their syntax expressed by a prototype (such as C<system> or C<chomp>). If you override them you won't be able to fully mimic their original syntax. The built-ins C<do>, C<require> and C<glob> can also be overridden, but due to special magic, their original syntax is preserved, and you don't have to define a prototype for their replacements. (You can't override the C<do BLOCK> syntax, though). C<require> has special additional dark magic: if you invoke your C<require> replacement as C<require Foo::Bar>, it will actually receive the argument C<"Foo/Bar.pm"> in @_. See L<perlfunc/require>. And, as you'll have noticed from the previous example, if you override C<glob>, the C<< <*> >> glob operator is overridden as well. In a similar fashion, overriding the C<readline> function also overrides the equivalent I/O operator C<< <FILEHANDLE> >>. Also, overriding C<readpipe> also overrides the operators C<``> and C<qx//>. Finally, some built-ins (e.g. C<exists> or C<grep>) can't be overridden. =head2 Autoloading X<autoloading> X<AUTOLOAD> If you call a subroutine that is undefined, you would ordinarily get an immediate, fatal error complaining that the subroutine doesn't exist. (Likewise for subroutines being used as methods, when the method doesn't exist in any base class of the class's package.) However, if an C<AUTOLOAD> subroutine is defined in the package or packages used to locate the original subroutine, then that C<AUTOLOAD> subroutine is called with the arguments that would have been passed to the original subroutine. The fully qualified name of the original subroutine magically appears in the global $AUTOLOAD variable of the same package as the C<AUTOLOAD> routine. The name is not passed as an ordinary argument because, er, well, just because, that's why. (As an exception, a method call to a nonexistent C<import> or C<unimport> method is just skipped instead. Also, if the AUTOLOAD subroutine is an XSUB, there are other ways to retrieve the subroutine name. See L<perlguts/Autoloading with XSUBs> for details.) Many C<AUTOLOAD> routines load in a definition for the requested subroutine using eval(), then execute that subroutine using a special form of goto() that erases the stack frame of the C<AUTOLOAD> routine without a trace. (See the source to the standard module documented in L<AutoLoader>, for example.) But an C<AUTOLOAD> routine can also just emulate the routine and never define it. For example, let's pretend that a function that wasn't defined should just invoke C<system> with those arguments. All you'd do is: sub AUTOLOAD { our $AUTOLOAD; # keep 'use strict' happy my $program = $AUTOLOAD; $program =~ s/.*:://; system($program, @_); } date(); who(); ls('-l'); In fact, if you predeclare functions you want to call that way, you don't even need parentheses: use subs qw(date who ls); date; who; ls '-l'; A more complete example of this is the Shell module on CPAN, which can treat undefined subroutine calls as calls to external programs. Mechanisms are available to help modules writers split their modules into autoloadable files. See the standard AutoLoader module described in L<AutoLoader> and in L<AutoSplit>, the standard SelfLoader modules in L<SelfLoader>, and the document on adding C functions to Perl code in L<perlxs>. =head2 Subroutine Attributes X<attribute> X<subroutine, attribute> X<attrs> A subroutine declaration or definition may have a list of attributes associated with it. If such an attribute list is present, it is broken up at space or colon boundaries and treated as though a C<use attributes> had been seen. See L<attributes> for details about what attributes are currently supported. Unlike the limitation with the obsolescent C<use attrs>, the C<sub : ATTRLIST> syntax works to associate the attributes with a pre-declaration, and not just with a subroutine definition. The attributes must be valid as simple identifier names (without any punctuation other than the '_' character). They may have a parameter list appended, which is only checked for whether its parentheses ('(',')') nest properly. Examples of valid syntax (even though the attributes are unknown): sub fnord (&\%) : switch(10,foo(7,3)) : expensive; sub plugh () : Ugly('\(") :Bad; sub xyzzy : _5x5 { ... } Examples of invalid syntax: sub fnord : switch(10,foo(); # ()-string not balanced sub snoid : Ugly('('); # ()-string not balanced sub xyzzy : 5x5; # "5x5" not a valid identifier sub plugh : Y2::north; # "Y2::north" not a simple identifier sub snurt : foo + bar; # "+" not a colon or space The attribute list is passed as a list of constant strings to the code which associates them with the subroutine. In particular, the second example of valid syntax above currently looks like this in terms of how it's parsed and invoked: use attributes __PACKAGE__, \&plugh, q[Ugly('\(")], 'Bad'; For further details on attribute lists and their manipulation, see L<attributes> and L<Attribute::Handlers>. =head1 SEE ALSO See L<perlref/"Function Templates"> for more about references and closures. See L<perlxs> if you'd like to learn about calling C subroutines from Perl. See L<perlembed> if you'd like to learn about calling Perl subroutines from C. See L<perlmod> to learn about bundling up your functions in separate files. See L<perlmodlib> to learn what library modules come standard on your system. See L<perlootut> to learn how to make object method calls. perlsymbian.pod 0000644 00000035760 15125556335 0007622 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specially designed to be readable as is. =head1 NAME perlsymbian - Perl version 5 on Symbian OS =head1 DESCRIPTION This document describes various features of the Symbian operating system that will affect how Perl version 5 (hereafter just Perl) is compiled and/or runs. B<NOTE: this port (as of 0.4.1) does not compile into a Symbian OS GUI application, but instead it results in a Symbian DLL.> The DLL includes a C++ class called CPerlBase, which one can then (derive from and) use to embed Perl into applications, see F<symbian/README>. The base port of Perl to Symbian only implements the basic POSIX-like functionality; it does not implement any further Symbian or Series 60, Series 80, or UIQ bindings for Perl. It is also possible to generate Symbian executables for "miniperl" and "perl", but since there is no standard command line interface for Symbian (nor full keyboards in the devices), these are useful mainly as demonstrations. =head2 Compiling Perl on Symbian (0) You need to have the appropriate Symbian SDK installed. These instructions have been tested under various Nokia Series 60 Symbian SDKs (1.2 to 2.6, 2.8 should also work, 1.2 compiles but does not work), Series 80 2.0, and Nokia 7710 (Series 90) SDK. You can get the SDKs from Forum Nokia (L<http://www.forum.nokia.com/>). A very rough port ("it compiles") to UIQ 2.1 has also been made. A prerequisite for any of the SDKs is to install ActivePerl from ActiveState, L<http://www.activestate.com/Products/ActivePerl/> Having the SDK installed also means that you need to have either the Metrowerks CodeWarrior installed (2.8 and 3.0 were used in testing) or the Microsoft Visual C++ 6.0 installed (SP3 minimum, SP5 recommended). Note that for example the Series 60 2.0 VC SDK installation talks about ActivePerl build 518, which does no more (as of mid-2005) exist at the ActiveState website. The ActivePerl 5.8.4 build 810 was used successfully for compiling Perl on Symbian. The 5.6.x ActivePerls do not work. Other SDKs or compilers like Visual.NET, command-line-only Visual.NET, Borland, GnuPoc, or sdk2unix have not been tried. These instructions almost certainly won't work with older Symbian releases or other SDKs. Patches to get this port running in other releases, SDKs, compilers, platforms, or devices are naturally welcome. (1) Get a Perl source code distribution (for example the file perl-5.9.2.tar.gz is fine) from L<http://www.cpan.org/src/> and unpack it in your the C:/Symbian directory of your Windows system. (2) Change to the perl source directory. cd c:\Symbian\perl-5.x.x (3) Run the following script using the perl coming with the SDK perl symbian\config.pl You must use the cmd.exe, the Cygwin shell will not work. The PATH must include the SDK tools, including a Perl, which should be the case under cmd.exe. If you do not have that, see the end of symbian\sdk.pl for notes of how your environment should be set up for Symbian compiles. (4) Build the project, either by make all in cmd.exe or by using either the Metrowerks CodeWarrior or the Visual C++ 6.0, or the Visual Studio 8 (the Visual C++ 2005 Express Edition works fine). If you use the VC IDE, you will have to run F<symbian\config.pl> first using the cmd.exe, and then run 'make win.mf vc6.mf' to generate the VC6 makefiles and workspaces. "make vc6" will compile for the VC6, and "make cw" for the CodeWarrior. The following SDK and compiler configurations and Nokia phones were tested at some point in time (+ = compiled and PerlApp run, - = not), both for Perl 5.8.x and 5.9.x: SDK | VC | CW | --------+----+----+--- S60 1.2 | + | + | 3650 (*) S60 2.0 | + | + | 6600 S60 2.1 | - | + | 6670 S60 2.6 | + | + | 6630 S60 2.8 | + | + | (not tested in a device) S80 2.6 | - | + | 9300 S90 1.1 | + | - | 7710 UIQ 2.1 | - | + | (not tested in a device) (*) Compiles but does not work, unfortunately, a problem with Symbian. If you are using the 'make' directly, it is the GNU make from the SDKs, and it will invoke the right make commands for the Windows emulator build and the Arm target builds ('thumb' by default) as necessary. The build scripts assume the 'absolute style' SDK installs under C:, the 'subst style' will not work. If using the VC IDE, to build use for example the File->Open Workspace-> C:\Symbian\8.0a\S60_2nd_FP2\epoc32\build\symbian\perl\perl\wins\perl.dsw The emulator binaries will appear in the same directory. If using the VC IDE, you will a lot of warnings in the beginning of the build because a lot of headers mentioned by the source cannot be found, but this is not serious since those headers are not used. The Metrowerks will give a lot of warnings about unused variables and empty declarations, you can ignore those. When the Windows and Arm DLLs are built do not be scared by a very long messages whizzing by: it is the "export freeze" phase where the whole (rather large) API of Perl is listed. Once the build is completed you need to create the DLL SIS file by make perldll.sis which will create the file perlXYZ.sis (the XYZ being the Perl version) which you can then install into your Symbian device: an easy way to do this is to send them via Bluetooth or infrared and just open the messages. Since the total size of all Perl SIS files once installed is over 2 MB, it is recommended to do the installation into a memory card (drive E:) instead of the C: drive. The size of the perlXYZ.SIS is about 370 kB but once it is in the device it is about one 750 kB (according to the application manager). The perlXYZ.sis includes only the Perl DLL: to create an additional SIS file which includes some of the standard (pure) Perl libraries, issue the command make perllib.sis Some of the standard Perl libraries are included, but not all: see L</HISTORY> or F<symbian\install.cfg> for more details (250 kB -> 700 kB). Some of the standard Perl XS extensions (see L</HISTORY> are also available: make perlext.sis which will create perlXYZext.sis (290 kB -> 770 kB). To compile the demonstration application PerlApp you need first to install the Perl headers under the SDK. To install the Perl headers and the class CPerlBase documentation so that you no more need the Perl sources around to compile Perl applications using the SDK: make sdkinstall The destination directory is C:\Symbian\perl\X.Y.Z. For more details, see F<symbian\PerlBase.pod>. Once the headers have been installed, you can create a SIS for the PerlApp: make perlapp.sis The perlapp.sis (11 kB -> 16 kB) will be built in the symbian subdirectory, but a copy will also be made to the main directory. If you want to package the Perl DLLs (one for WINS, one for ARMI), the headers, and the documentation: make perlsdk.zip which will create perlXYZsdk.zip that can be used in another Windows system with the SDK, without having to compile Perl in that system. If you want to package the PerlApp sources: make perlapp.zip If you want to package the perl.exe and miniperl.exe, you can use the perlexe.sis and miniperlexe.sis make targets. You also probably want the perllib.sis for the libraries and maybe even the perlapp.sis for the recognizer. The make target 'allsis' combines all the above SIS targets. To clean up after compilation you can use either of make clean make distclean depending on how clean you want to be. =head2 Compilation problems If you see right after "make" this cat makefile.sh >makefile 'cat' is not recognized as an internal or external command, operable program or batch file. it means you need to (re)run the F<symbian\config.pl>. If you get the error 'perl' is not recognized as an internal or external command, operable program or batch file. you may need to reinstall the ActivePerl. If you see this ren makedef.pl nomakedef.pl The system cannot find the file specified. C:\Symbian\...\make.exe: [rename_makedef] Error 1 (ignored) please ignore it since it is nothing serious (the build process of renames the Perl makedef.pl as nomakedef.pl to avoid confusing it with a makedef.pl of the SDK). =head2 PerlApp The PerlApp application demonstrates how to embed Perl interpreters to a Symbian application. The "Time" menu item runs the following Perl code: C<print "Running in ", $^O, "\n", scalar localtime>, the "Oneliner" allows one to type in Perl code, and the "Run" opens a file chooser for selecting a Perl file to run. The PerlApp also is started when the "Perl recognizer" (also included and installed) detects a Perl file being activated through the GUI, and offers either to install it under \Perl (if the Perl file is in the inbox of the messaging application) or to run it (if the Perl file is under \Perl). =head2 sisify.pl In the symbian subdirectory there is F<sisify.pl> utility which can be used to package Perl scripts and/or Perl library directories into SIS files, which can be installed to the device. To run the sisify.pl utility, you will need to have the 'makesis' and 'uidcrc' utilities already installed. If you don't have the Win32 SDKs, you may try for example L<http://gnupoc.sourceforge.net/> or L<http://symbianos.org/~andreh/>. =head2 Using Perl in Symbian First of all note that you have full access to the Symbian device when using Perl: you can do a lot of damage to your device (like removing system files) unless you are careful. Please do take backups before doing anything. The Perl port has been done for the most part using the Symbian standard POSIX-ish STDLIB library. It is a reasonably complete library, but certain corners of such emulation libraries that tend to be left unimplemented on non-UNIX platforms have been left unimplemented also this time: fork(), signals(), user/group ids, select() working for sockets, non-blocking sockets, and so forth. See the file F<symbian/config.sh> and look for 'undef' to find the unsupported APIs (or from Perl use Config). The filesystem of Symbian devices uses DOSish syntax, "drives" separated from paths by a colon, and backslashes for the path. The exact assignment of the drives probably varies between platforms, but for example in Series 60 you might see C: as the (flash) main memory, D: as the RAM drive, E: as the memory card (MMC), Z: as the ROM. In Series 80 D: is the memory card. As far the devices go the NUL: is the bit bucket, the COMx: are the serial lines, IRCOMx: are the IR ports, TMP: might be C:\System\Temp. Remember to double those backslashes in doublequoted strings. The Perl DLL is installed in \System\Libs\. The Perl libraries and extension DLLs are installed in \System\Libs\Perl\X.Y.Z\. The PerlApp is installed in \System\Apps\, and the SIS also installs a couple of demo scripts in \Perl\ (C:\Mydocs\Perl\ on Nokia 7710). Note that the Symbian filesystem is very picky: it strongly prefers the \ instead of the /. When doing XS / Symbian C++ programming include first the Symbian headers, then any standard C/POSIX headers, then Perl headers, and finally any application headers. New() and Copy() are unfortunately used by both Symbian and Perl code so you'll have to play cpp games if you need them. PerlBase.h undefines the Perl definitions and redefines them as PerlNew() and PerlCopy(). =head1 TO DO Lots. See F<symbian/TODO>. =head1 WARNING As of Perl Symbian port version 0.4.1 any part of Perl's standard regression test suite has not been run on a real Symbian device using the ported Perl, so innumerable bugs may lie in wait. Therefore there is absolutely no warranty. =head1 NOTE When creating and extending application programming interfaces (APIs) for Symbian or Series 60 or Series 80 or Series 90 it is suggested that trademarks, registered trademarks, or trade names are not used in the API names. Instead, developers should consider basing the API naming in the existing (C++, or maybe Java) public component and API naming, modified as appropriate by the rules of the programming language the new APIs are for. Nokia is a registered trademark of Nokia Corporation. Nokia's product names are trademarks or registered trademarks of Nokia. Other product and company names mentioned herein may be trademarks or trade names of their respective owners. =head1 AUTHOR Jarkko Hietaniemi =head1 COPYRIGHT Copyright (c) 2004-2005 Nokia. All rights reserved. Copyright (c) 2006-2007 Jarkko Hietaniemi. =head1 LICENSE The Symbian port is licensed under the same terms as Perl itself. =head1 HISTORY =over 4 =item * 0.1.0: April 2005 (This will show as "0.01" in the Symbian Installer.) - The console window is a very simple console indeed: one can get the newline with "000" and the "C" button is a backspace. Do not expect a terminal capable of vt100 or ANSI sequences. The console is also "ASCII", you cannot input e.g. any accented letters. Because of obvious physical constraints the console is also very small: (in Nokia 6600) 22 columns, 17 rows. - The following libraries are available: AnyDBM_File AutoLoader base Carp Config Cwd constant DynaLoader Exporter File::Spec integer lib strict Symbol vars warnings XSLoader - The following extensions are available: attributes Compress::Zlib Cwd Data::Dumper Devel::Peek Digest::MD5 DynaLoader Fcntl File::Glob Filter::Util::Call IO List::Util MIME::Base64 PerlIO::scalar PerlIO::via SDBM_File Socket Storable Time::HiRes - The following extensions are missing for various technical reasons: B ByteLoader Devel::DProf Devel::PPPort Encode GDBM_File IPC::SysV NDBM_File Opcode PerlIO::encoding POSIX re Safe Sys::Hostname Sys::Syslog threads threads::shared Unicode::Normalize - Using MakeMaker or the Module::* to build and install modules is not supported. - Building XS other than the ones in the core is not supported. Since this is 0.something release, any future releases are almost guaranteed to be binary incompatible. As a sign of this the Symbian symbol exports are kept unfrozen and the .def files fully rebuilt every time. =item * 0.2.0: October 2005 - Perl 5.9.3 (patch level 25741) - Compress::Zlib and IO::Zlib supported - sisify.pl added We maintain the binary incompatibility. =item * 0.3.0: October 2005 - Perl 5.9.3 (patch level 25911) - Series 80 2.0 and UIQ 2.1 support We maintain the binary incompatibility. =item * 0.4.0: November 2005 - Perl 5.9.3 (patch level 26052) - adding a sample Symbian extension We maintain the binary incompatibility. =item * 0.4.1: December 2006 - Perl 5.9.5-to-be (patch level 30002) - added extensions: Compress/Raw/Zlib, Digest/SHA, Hash/Util, Math/BigInt/FastCalc, Text/Soundex, Time/Piece - port to S90 1.1 by alexander smishlajev We maintain the binary incompatibility. =item * 0.4.2: March 2007 - catchup with Perl 5.9.5-to-be (patch level 30812) - tested to build with Microsoft Visual C++ 2005 Express Edition (which uses Microsoft Visual C 8, instead of the old VC6), SDK used for testing S60_2nd_FP3 aka 8.1a We maintain the binary incompatibility. =back =cut perlcall.pod 0000644 00000156642 15125556335 0007076 0 ustar 00 =head1 NAME perlcall - Perl calling conventions from C =head1 DESCRIPTION The purpose of this document is to show you how to call Perl subroutines directly from C, i.e., how to write I<callbacks>. Apart from discussing the C interface provided by Perl for writing callbacks the document uses a series of examples to show how the interface actually works in practice. In addition some techniques for coding callbacks are covered. Examples where callbacks are necessary include =over 5 =item * An Error Handler You have created an XSUB interface to an application's C API. A fairly common feature in applications is to allow you to define a C function that will be called whenever something nasty occurs. What we would like is to be able to specify a Perl subroutine that will be called instead. =item * An Event-Driven Program The classic example of where callbacks are used is when writing an event driven program, such as for an X11 application. In this case you register functions to be called whenever specific events occur, e.g., a mouse button is pressed, the cursor moves into a window or a menu item is selected. =back Although the techniques described here are applicable when embedding Perl in a C program, this is not the primary goal of this document. There are other details that must be considered and are specific to embedding Perl. For details on embedding Perl in C refer to L<perlembed>. Before you launch yourself head first into the rest of this document, it would be a good idea to have read the following two documents--L<perlxs> and L<perlguts>. =head1 THE CALL_ FUNCTIONS Although this stuff is easier to explain using examples, you first need be aware of a few important definitions. Perl has a number of C functions that allow you to call Perl subroutines. They are I32 call_sv(SV* sv, I32 flags); I32 call_pv(char *subname, I32 flags); I32 call_method(char *methname, I32 flags); I32 call_argv(char *subname, I32 flags, char **argv); The key function is I<call_sv>. All the other functions are fairly simple wrappers which make it easier to call Perl subroutines in special cases. At the end of the day they will all call I<call_sv> to invoke the Perl subroutine. All the I<call_*> functions have a C<flags> parameter which is used to pass a bit mask of options to Perl. This bit mask operates identically for each of the functions. The settings available in the bit mask are discussed in L</FLAG VALUES>. Each of the functions will now be discussed in turn. =over 5 =item call_sv I<call_sv> takes two parameters. The first, C<sv>, is an SV*. This allows you to specify the Perl subroutine to be called either as a C string (which has first been converted to an SV) or a reference to a subroutine. The section, L</Using call_sv>, shows how you can make use of I<call_sv>. =item call_pv The function, I<call_pv>, is similar to I<call_sv> except it expects its first parameter to be a C char* which identifies the Perl subroutine you want to call, e.g., C<call_pv("fred", 0)>. If the subroutine you want to call is in another package, just include the package name in the string, e.g., C<"pkg::fred">. =item call_method The function I<call_method> is used to call a method from a Perl class. The parameter C<methname> corresponds to the name of the method to be called. Note that the class that the method belongs to is passed on the Perl stack rather than in the parameter list. This class can be either the name of the class (for a static method) or a reference to an object (for a virtual method). See L<perlobj> for more information on static and virtual methods and L</Using call_method> for an example of using I<call_method>. =item call_argv I<call_argv> calls the Perl subroutine specified by the C string stored in the C<subname> parameter. It also takes the usual C<flags> parameter. The final parameter, C<argv>, consists of a NULL-terminated list of C strings to be passed as parameters to the Perl subroutine. See L</Using call_argv>. =back All the functions return an integer. This is a count of the number of items returned by the Perl subroutine. The actual items returned by the subroutine are stored on the Perl stack. As a general rule you should I<always> check the return value from these functions. Even if you are expecting only a particular number of values to be returned from the Perl subroutine, there is nothing to stop someone from doing something unexpected--don't say you haven't been warned. =head1 FLAG VALUES The C<flags> parameter in all the I<call_*> functions is one of G_VOID, G_SCALAR, or G_ARRAY, which indicate the call context, OR'ed together with a bit mask of any combination of the other G_* symbols defined below. =head2 G_VOID Calls the Perl subroutine in a void context. This flag has 2 effects: =over 5 =item 1. It indicates to the subroutine being called that it is executing in a void context (if it executes I<wantarray> the result will be the undefined value). =item 2. It ensures that nothing is actually returned from the subroutine. =back The value returned by the I<call_*> function indicates how many items have been returned by the Perl subroutine--in this case it will be 0. =head2 G_SCALAR Calls the Perl subroutine in a scalar context. This is the default context flag setting for all the I<call_*> functions. This flag has 2 effects: =over 5 =item 1. It indicates to the subroutine being called that it is executing in a scalar context (if it executes I<wantarray> the result will be false). =item 2. It ensures that only a scalar is actually returned from the subroutine. The subroutine can, of course, ignore the I<wantarray> and return a list anyway. If so, then only the last element of the list will be returned. =back The value returned by the I<call_*> function indicates how many items have been returned by the Perl subroutine - in this case it will be either 0 or 1. If 0, then you have specified the G_DISCARD flag. If 1, then the item actually returned by the Perl subroutine will be stored on the Perl stack - the section L</Returning a Scalar> shows how to access this value on the stack. Remember that regardless of how many items the Perl subroutine returns, only the last one will be accessible from the stack - think of the case where only one value is returned as being a list with only one element. Any other items that were returned will not exist by the time control returns from the I<call_*> function. The section L</Returning a List in Scalar Context> shows an example of this behavior. =head2 G_ARRAY Calls the Perl subroutine in a list context. As with G_SCALAR, this flag has 2 effects: =over 5 =item 1. It indicates to the subroutine being called that it is executing in a list context (if it executes I<wantarray> the result will be true). =item 2. It ensures that all items returned from the subroutine will be accessible when control returns from the I<call_*> function. =back The value returned by the I<call_*> function indicates how many items have been returned by the Perl subroutine. If 0, then you have specified the G_DISCARD flag. If not 0, then it will be a count of the number of items returned by the subroutine. These items will be stored on the Perl stack. The section L</Returning a List of Values> gives an example of using the G_ARRAY flag and the mechanics of accessing the returned items from the Perl stack. =head2 G_DISCARD By default, the I<call_*> functions place the items returned from by the Perl subroutine on the stack. If you are not interested in these items, then setting this flag will make Perl get rid of them automatically for you. Note that it is still possible to indicate a context to the Perl subroutine by using either G_SCALAR or G_ARRAY. If you do not set this flag then it is I<very> important that you make sure that any temporaries (i.e., parameters passed to the Perl subroutine and values returned from the subroutine) are disposed of yourself. The section L</Returning a Scalar> gives details of how to dispose of these temporaries explicitly and the section L</Using Perl to Dispose of Temporaries> discusses the specific circumstances where you can ignore the problem and let Perl deal with it for you. =head2 G_NOARGS Whenever a Perl subroutine is called using one of the I<call_*> functions, it is assumed by default that parameters are to be passed to the subroutine. If you are not passing any parameters to the Perl subroutine, you can save a bit of time by setting this flag. It has the effect of not creating the C<@_> array for the Perl subroutine. Although the functionality provided by this flag may seem straightforward, it should be used only if there is a good reason to do so. The reason for being cautious is that, even if you have specified the G_NOARGS flag, it is still possible for the Perl subroutine that has been called to think that you have passed it parameters. In fact, what can happen is that the Perl subroutine you have called can access the C<@_> array from a previous Perl subroutine. This will occur when the code that is executing the I<call_*> function has itself been called from another Perl subroutine. The code below illustrates this sub fred { print "@_\n" } sub joe { &fred } &joe(1,2,3); This will print 1 2 3 What has happened is that C<fred> accesses the C<@_> array which belongs to C<joe>. =head2 G_EVAL It is possible for the Perl subroutine you are calling to terminate abnormally, e.g., by calling I<die> explicitly or by not actually existing. By default, when either of these events occurs, the process will terminate immediately. If you want to trap this type of event, specify the G_EVAL flag. It will put an I<eval { }> around the subroutine call. Whenever control returns from the I<call_*> function you need to check the C<$@> variable as you would in a normal Perl script. The value returned from the I<call_*> function is dependent on what other flags have been specified and whether an error has occurred. Here are all the different cases that can occur: =over 5 =item * If the I<call_*> function returns normally, then the value returned is as specified in the previous sections. =item * If G_DISCARD is specified, the return value will always be 0. =item * If G_ARRAY is specified I<and> an error has occurred, the return value will always be 0. =item * If G_SCALAR is specified I<and> an error has occurred, the return value will be 1 and the value on the top of the stack will be I<undef>. This means that if you have already detected the error by checking C<$@> and you want the program to continue, you must remember to pop the I<undef> from the stack. =back See L</Using G_EVAL> for details on using G_EVAL. =head2 G_KEEPERR Using the G_EVAL flag described above will always set C<$@>: clearing it if there was no error, and setting it to describe the error if there was an error in the called code. This is what you want if your intention is to handle possible errors, but sometimes you just want to trap errors and stop them interfering with the rest of the program. This scenario will mostly be applicable to code that is meant to be called from within destructors, asynchronous callbacks, and signal handlers. In such situations, where the code being called has little relation to the surrounding dynamic context, the main program needs to be insulated from errors in the called code, even if they can't be handled intelligently. It may also be useful to do this with code for C<__DIE__> or C<__WARN__> hooks, and C<tie> functions. The G_KEEPERR flag is meant to be used in conjunction with G_EVAL in I<call_*> functions that are used to implement such code, or with C<eval_sv>. This flag has no effect on the C<call_*> functions when G_EVAL is not used. When G_KEEPERR is used, any error in the called code will terminate the call as usual, and the error will not propagate beyond the call (as usual for G_EVAL), but it will not go into C<$@>. Instead the error will be converted into a warning, prefixed with the string "\t(in cleanup)". This can be disabled using C<no warnings 'misc'>. If there is no error, C<$@> will not be cleared. Note that the G_KEEPERR flag does not propagate into inner evals; these may still set C<$@>. The G_KEEPERR flag was introduced in Perl version 5.002. See L</Using G_KEEPERR> for an example of a situation that warrants the use of this flag. =head2 Determining the Context As mentioned above, you can determine the context of the currently executing subroutine in Perl with I<wantarray>. The equivalent test can be made in C by using the C<GIMME_V> macro, which returns C<G_ARRAY> if you have been called in a list context, C<G_SCALAR> if in a scalar context, or C<G_VOID> if in a void context (i.e., the return value will not be used). An older version of this macro is called C<GIMME>; in a void context it returns C<G_SCALAR> instead of C<G_VOID>. An example of using the C<GIMME_V> macro is shown in section L</Using GIMME_V>. =head1 EXAMPLES Enough of the definition talk! Let's have a few examples. Perl provides many macros to assist in accessing the Perl stack. Wherever possible, these macros should always be used when interfacing to Perl internals. We hope this should make the code less vulnerable to any changes made to Perl in the future. Another point worth noting is that in the first series of examples I have made use of only the I<call_pv> function. This has been done to keep the code simpler and ease you into the topic. Wherever possible, if the choice is between using I<call_pv> and I<call_sv>, you should always try to use I<call_sv>. See L</Using call_sv> for details. =head2 No Parameters, Nothing Returned This first trivial example will call a Perl subroutine, I<PrintUID>, to print out the UID of the process. sub PrintUID { print "UID is $<\n"; } and here is a C function to call it static void call_PrintUID() { dSP; PUSHMARK(SP); call_pv("PrintUID", G_DISCARD|G_NOARGS); } Simple, eh? A few points to note about this example: =over 5 =item 1. Ignore C<dSP> and C<PUSHMARK(SP)> for now. They will be discussed in the next example. =item 2. We aren't passing any parameters to I<PrintUID> so G_NOARGS can be specified. =item 3. We aren't interested in anything returned from I<PrintUID>, so G_DISCARD is specified. Even if I<PrintUID> was changed to return some value(s), having specified G_DISCARD will mean that they will be wiped by the time control returns from I<call_pv>. =item 4. As I<call_pv> is being used, the Perl subroutine is specified as a C string. In this case the subroutine name has been 'hard-wired' into the code. =item 5. Because we specified G_DISCARD, it is not necessary to check the value returned from I<call_pv>. It will always be 0. =back =head2 Passing Parameters Now let's make a slightly more complex example. This time we want to call a Perl subroutine, C<LeftString>, which will take 2 parameters--a string ($s) and an integer ($n). The subroutine will simply print the first $n characters of the string. So the Perl subroutine would look like this: sub LeftString { my($s, $n) = @_; print substr($s, 0, $n), "\n"; } The C function required to call I<LeftString> would look like this: static void call_LeftString(a, b) char * a; int b; { dSP; ENTER; SAVETMPS; PUSHMARK(SP); EXTEND(SP, 2); PUSHs(sv_2mortal(newSVpv(a, 0))); PUSHs(sv_2mortal(newSViv(b))); PUTBACK; call_pv("LeftString", G_DISCARD); FREETMPS; LEAVE; } Here are a few notes on the C function I<call_LeftString>. =over 5 =item 1. Parameters are passed to the Perl subroutine using the Perl stack. This is the purpose of the code beginning with the line C<dSP> and ending with the line C<PUTBACK>. The C<dSP> declares a local copy of the stack pointer. This local copy should B<always> be accessed as C<SP>. =item 2. If you are going to put something onto the Perl stack, you need to know where to put it. This is the purpose of the macro C<dSP>--it declares and initializes a I<local> copy of the Perl stack pointer. All the other macros which will be used in this example require you to have used this macro. The exception to this rule is if you are calling a Perl subroutine directly from an XSUB function. In this case it is not necessary to use the C<dSP> macro explicitly--it will be declared for you automatically. =item 3. Any parameters to be pushed onto the stack should be bracketed by the C<PUSHMARK> and C<PUTBACK> macros. The purpose of these two macros, in this context, is to count the number of parameters you are pushing automatically. Then whenever Perl is creating the C<@_> array for the subroutine, it knows how big to make it. The C<PUSHMARK> macro tells Perl to make a mental note of the current stack pointer. Even if you aren't passing any parameters (like the example shown in the section L</No Parameters, Nothing Returned>) you must still call the C<PUSHMARK> macro before you can call any of the I<call_*> functions--Perl still needs to know that there are no parameters. The C<PUTBACK> macro sets the global copy of the stack pointer to be the same as our local copy. If we didn't do this, I<call_pv> wouldn't know where the two parameters we pushed were--remember that up to now all the stack pointer manipulation we have done is with our local copy, I<not> the global copy. =item 4. Next, we come to EXTEND and PUSHs. This is where the parameters actually get pushed onto the stack. In this case we are pushing a string and an integer. Alternatively you can use the XPUSHs() macro, which combines a C<EXTEND(SP, 1)> and C<PUSHs()>. This is less efficient if you're pushing multiple values. See L<perlguts/"XSUBs and the Argument Stack"> for details on how the PUSH macros work. =item 5. Because we created temporary values (by means of sv_2mortal() calls) we will have to tidy up the Perl stack and dispose of mortal SVs. This is the purpose of ENTER; SAVETMPS; at the start of the function, and FREETMPS; LEAVE; at the end. The C<ENTER>/C<SAVETMPS> pair creates a boundary for any temporaries we create. This means that the temporaries we get rid of will be limited to those which were created after these calls. The C<FREETMPS>/C<LEAVE> pair will get rid of any values returned by the Perl subroutine (see next example), plus it will also dump the mortal SVs we have created. Having C<ENTER>/C<SAVETMPS> at the beginning of the code makes sure that no other mortals are destroyed. Think of these macros as working a bit like C<{> and C<}> in Perl to limit the scope of local variables. See the section L</Using Perl to Dispose of Temporaries> for details of an alternative to using these macros. =item 6. Finally, I<LeftString> can now be called via the I<call_pv> function. The only flag specified this time is G_DISCARD. Because we are passing 2 parameters to the Perl subroutine this time, we have not specified G_NOARGS. =back =head2 Returning a Scalar Now for an example of dealing with the items returned from a Perl subroutine. Here is a Perl subroutine, I<Adder>, that takes 2 integer parameters and simply returns their sum. sub Adder { my($a, $b) = @_; $a + $b; } Because we are now concerned with the return value from I<Adder>, the C function required to call it is now a bit more complex. static void call_Adder(a, b) int a; int b; { dSP; int count; ENTER; SAVETMPS; PUSHMARK(SP); EXTEND(SP, 2); PUSHs(sv_2mortal(newSViv(a))); PUSHs(sv_2mortal(newSViv(b))); PUTBACK; count = call_pv("Adder", G_SCALAR); SPAGAIN; if (count != 1) croak("Big trouble\n"); printf ("The sum of %d and %d is %d\n", a, b, POPi); PUTBACK; FREETMPS; LEAVE; } Points to note this time are =over 5 =item 1. The only flag specified this time was G_SCALAR. That means that the C<@_> array will be created and that the value returned by I<Adder> will still exist after the call to I<call_pv>. =item 2. The purpose of the macro C<SPAGAIN> is to refresh the local copy of the stack pointer. This is necessary because it is possible that the memory allocated to the Perl stack has been reallocated during the I<call_pv> call. If you are making use of the Perl stack pointer in your code you must always refresh the local copy using SPAGAIN whenever you make use of the I<call_*> functions or any other Perl internal function. =item 3. Although only a single value was expected to be returned from I<Adder>, it is still good practice to check the return code from I<call_pv> anyway. Expecting a single value is not quite the same as knowing that there will be one. If someone modified I<Adder> to return a list and we didn't check for that possibility and take appropriate action the Perl stack would end up in an inconsistent state. That is something you I<really> don't want to happen ever. =item 4. The C<POPi> macro is used here to pop the return value from the stack. In this case we wanted an integer, so C<POPi> was used. Here is the complete list of POP macros available, along with the types they return. POPs SV POPp pointer (PV) POPpbytex pointer to bytes (PV) POPn double (NV) POPi integer (IV) POPu unsigned integer (UV) POPl long POPul unsigned long Since these macros have side-effects don't use them as arguments to macros that may evaluate their argument several times, for example: /* Bad idea, don't do this */ STRLEN len; const char *s = SvPV(POPs, len); Instead, use a temporary: STRLEN len; SV *sv = POPs; const char *s = SvPV(sv, len); or a macro that guarantees it will evaluate its arguments only once: STRLEN len; const char *s = SvPVx(POPs, len); =item 5. The final C<PUTBACK> is used to leave the Perl stack in a consistent state before exiting the function. This is necessary because when we popped the return value from the stack with C<POPi> it updated only our local copy of the stack pointer. Remember, C<PUTBACK> sets the global stack pointer to be the same as our local copy. =back =head2 Returning a List of Values Now, let's extend the previous example to return both the sum of the parameters and the difference. Here is the Perl subroutine sub AddSubtract { my($a, $b) = @_; ($a+$b, $a-$b); } and this is the C function static void call_AddSubtract(a, b) int a; int b; { dSP; int count; ENTER; SAVETMPS; PUSHMARK(SP); EXTEND(SP, 2); PUSHs(sv_2mortal(newSViv(a))); PUSHs(sv_2mortal(newSViv(b))); PUTBACK; count = call_pv("AddSubtract", G_ARRAY); SPAGAIN; if (count != 2) croak("Big trouble\n"); printf ("%d - %d = %d\n", a, b, POPi); printf ("%d + %d = %d\n", a, b, POPi); PUTBACK; FREETMPS; LEAVE; } If I<call_AddSubtract> is called like this call_AddSubtract(7, 4); then here is the output 7 - 4 = 3 7 + 4 = 11 Notes =over 5 =item 1. We wanted list context, so G_ARRAY was used. =item 2. Not surprisingly C<POPi> is used twice this time because we were retrieving 2 values from the stack. The important thing to note is that when using the C<POP*> macros they come off the stack in I<reverse> order. =back =head2 Returning a List in Scalar Context Say the Perl subroutine in the previous section was called in a scalar context, like this static void call_AddSubScalar(a, b) int a; int b; { dSP; int count; int i; ENTER; SAVETMPS; PUSHMARK(SP); EXTEND(SP, 2); PUSHs(sv_2mortal(newSViv(a))); PUSHs(sv_2mortal(newSViv(b))); PUTBACK; count = call_pv("AddSubtract", G_SCALAR); SPAGAIN; printf ("Items Returned = %d\n", count); for (i = 1; i <= count; ++i) printf ("Value %d = %d\n", i, POPi); PUTBACK; FREETMPS; LEAVE; } The other modification made is that I<call_AddSubScalar> will print the number of items returned from the Perl subroutine and their value (for simplicity it assumes that they are integer). So if I<call_AddSubScalar> is called call_AddSubScalar(7, 4); then the output will be Items Returned = 1 Value 1 = 3 In this case the main point to note is that only the last item in the list is returned from the subroutine. I<AddSubtract> actually made it back to I<call_AddSubScalar>. =head2 Returning Data from Perl via the Parameter List It is also possible to return values directly via the parameter list--whether it is actually desirable to do it is another matter entirely. The Perl subroutine, I<Inc>, below takes 2 parameters and increments each directly. sub Inc { ++ $_[0]; ++ $_[1]; } and here is a C function to call it. static void call_Inc(a, b) int a; int b; { dSP; int count; SV * sva; SV * svb; ENTER; SAVETMPS; sva = sv_2mortal(newSViv(a)); svb = sv_2mortal(newSViv(b)); PUSHMARK(SP); EXTEND(SP, 2); PUSHs(sva); PUSHs(svb); PUTBACK; count = call_pv("Inc", G_DISCARD); if (count != 0) croak ("call_Inc: expected 0 values from 'Inc', got %d\n", count); printf ("%d + 1 = %d\n", a, SvIV(sva)); printf ("%d + 1 = %d\n", b, SvIV(svb)); FREETMPS; LEAVE; } To be able to access the two parameters that were pushed onto the stack after they return from I<call_pv> it is necessary to make a note of their addresses--thus the two variables C<sva> and C<svb>. The reason this is necessary is that the area of the Perl stack which held them will very likely have been overwritten by something else by the time control returns from I<call_pv>. =head2 Using G_EVAL Now an example using G_EVAL. Below is a Perl subroutine which computes the difference of its 2 parameters. If this would result in a negative result, the subroutine calls I<die>. sub Subtract { my ($a, $b) = @_; die "death can be fatal\n" if $a < $b; $a - $b; } and some C to call it static void call_Subtract(a, b) int a; int b; { dSP; int count; SV *err_tmp; ENTER; SAVETMPS; PUSHMARK(SP); EXTEND(SP, 2); PUSHs(sv_2mortal(newSViv(a))); PUSHs(sv_2mortal(newSViv(b))); PUTBACK; count = call_pv("Subtract", G_EVAL|G_SCALAR); SPAGAIN; /* Check the eval first */ err_tmp = ERRSV; if (SvTRUE(err_tmp)) { printf ("Uh oh - %s\n", SvPV_nolen(err_tmp)); POPs; } else { if (count != 1) croak("call_Subtract: wanted 1 value from 'Subtract', got %d\n", count); printf ("%d - %d = %d\n", a, b, POPi); } PUTBACK; FREETMPS; LEAVE; } If I<call_Subtract> is called thus call_Subtract(4, 5) the following will be printed Uh oh - death can be fatal Notes =over 5 =item 1. We want to be able to catch the I<die> so we have used the G_EVAL flag. Not specifying this flag would mean that the program would terminate immediately at the I<die> statement in the subroutine I<Subtract>. =item 2. The code err_tmp = ERRSV; if (SvTRUE(err_tmp)) { printf ("Uh oh - %s\n", SvPV_nolen(err_tmp)); POPs; } is the direct equivalent of this bit of Perl print "Uh oh - $@\n" if $@; C<PL_errgv> is a perl global of type C<GV *> that points to the symbol table entry containing the error. C<ERRSV> therefore refers to the C equivalent of C<$@>. We use a local temporary, C<err_tmp>, since C<ERRSV> is a macro that calls a function, and C<SvTRUE(ERRSV)> would end up calling that function multiple times. =for apidoc Amnh|GV *|PL_errgv =item 3. Note that the stack is popped using C<POPs> in the block where C<SvTRUE(err_tmp)> is true. This is necessary because whenever a I<call_*> function invoked with G_EVAL|G_SCALAR returns an error, the top of the stack holds the value I<undef>. Because we want the program to continue after detecting this error, it is essential that the stack be tidied up by removing the I<undef>. =back =head2 Using G_KEEPERR Consider this rather facetious example, where we have used an XS version of the call_Subtract example above inside a destructor: package Foo; sub new { bless {}, $_[0] } sub Subtract { my($a,$b) = @_; die "death can be fatal" if $a < $b; $a - $b; } sub DESTROY { call_Subtract(5, 4); } sub foo { die "foo dies"; } package main; { my $foo = Foo->new; eval { $foo->foo }; } print "Saw: $@" if $@; # should be, but isn't This example will fail to recognize that an error occurred inside the C<eval {}>. Here's why: the call_Subtract code got executed while perl was cleaning up temporaries when exiting the outer braced block, and because call_Subtract is implemented with I<call_pv> using the G_EVAL flag, it promptly reset C<$@>. This results in the failure of the outermost test for C<$@>, and thereby the failure of the error trap. Appending the G_KEEPERR flag, so that the I<call_pv> call in call_Subtract reads: count = call_pv("Subtract", G_EVAL|G_SCALAR|G_KEEPERR); will preserve the error and restore reliable error handling. =head2 Using call_sv In all the previous examples I have 'hard-wired' the name of the Perl subroutine to be called from C. Most of the time though, it is more convenient to be able to specify the name of the Perl subroutine from within the Perl script, and you'll want to use L<call_sv|perlapi/call_sv>. Consider the Perl code below sub fred { print "Hello there\n"; } CallSubPV("fred"); Here is a snippet of XSUB which defines I<CallSubPV>. void CallSubPV(name) char * name CODE: PUSHMARK(SP); call_pv(name, G_DISCARD|G_NOARGS); That is fine as far as it goes. The thing is, the Perl subroutine can be specified as only a string, however, Perl allows references to subroutines and anonymous subroutines. This is where I<call_sv> is useful. The code below for I<CallSubSV> is identical to I<CallSubPV> except that the C<name> parameter is now defined as an SV* and we use I<call_sv> instead of I<call_pv>. void CallSubSV(name) SV * name CODE: PUSHMARK(SP); call_sv(name, G_DISCARD|G_NOARGS); Because we are using an SV to call I<fred> the following can all be used: CallSubSV("fred"); CallSubSV(\&fred); $ref = \&fred; CallSubSV($ref); CallSubSV( sub { print "Hello there\n" } ); As you can see, I<call_sv> gives you much greater flexibility in how you can specify the Perl subroutine. You should note that, if it is necessary to store the SV (C<name> in the example above) which corresponds to the Perl subroutine so that it can be used later in the program, it not enough just to store a copy of the pointer to the SV. Say the code above had been like this: static SV * rememberSub; void SaveSub1(name) SV * name CODE: rememberSub = name; void CallSavedSub1() CODE: PUSHMARK(SP); call_sv(rememberSub, G_DISCARD|G_NOARGS); The reason this is wrong is that, by the time you come to use the pointer C<rememberSub> in C<CallSavedSub1>, it may or may not still refer to the Perl subroutine that was recorded in C<SaveSub1>. This is particularly true for these cases: SaveSub1(\&fred); CallSavedSub1(); SaveSub1( sub { print "Hello there\n" } ); CallSavedSub1(); By the time each of the C<SaveSub1> statements above has been executed, the SV*s which corresponded to the parameters will no longer exist. Expect an error message from Perl of the form Can't use an undefined value as a subroutine reference at ... for each of the C<CallSavedSub1> lines. Similarly, with this code $ref = \&fred; SaveSub1($ref); $ref = 47; CallSavedSub1(); you can expect one of these messages (which you actually get is dependent on the version of Perl you are using) Not a CODE reference at ... Undefined subroutine &main::47 called ... The variable $ref may have referred to the subroutine C<fred> whenever the call to C<SaveSub1> was made but by the time C<CallSavedSub1> gets called it now holds the number C<47>. Because we saved only a pointer to the original SV in C<SaveSub1>, any changes to $ref will be tracked by the pointer C<rememberSub>. This means that whenever C<CallSavedSub1> gets called, it will attempt to execute the code which is referenced by the SV* C<rememberSub>. In this case though, it now refers to the integer C<47>, so expect Perl to complain loudly. A similar but more subtle problem is illustrated with this code: $ref = \&fred; SaveSub1($ref); $ref = \&joe; CallSavedSub1(); This time whenever C<CallSavedSub1> gets called it will execute the Perl subroutine C<joe> (assuming it exists) rather than C<fred> as was originally requested in the call to C<SaveSub1>. To get around these problems it is necessary to take a full copy of the SV. The code below shows C<SaveSub2> modified to do that. /* this isn't thread-safe */ static SV * keepSub = (SV*)NULL; void SaveSub2(name) SV * name CODE: /* Take a copy of the callback */ if (keepSub == (SV*)NULL) /* First time, so create a new SV */ keepSub = newSVsv(name); else /* Been here before, so overwrite */ SvSetSV(keepSub, name); void CallSavedSub2() CODE: PUSHMARK(SP); call_sv(keepSub, G_DISCARD|G_NOARGS); To avoid creating a new SV every time C<SaveSub2> is called, the function first checks to see if it has been called before. If not, then space for a new SV is allocated and the reference to the Perl subroutine C<name> is copied to the variable C<keepSub> in one operation using C<newSVsv>. Thereafter, whenever C<SaveSub2> is called, the existing SV, C<keepSub>, is overwritten with the new value using C<SvSetSV>. Note: using a static or global variable to store the SV isn't thread-safe. You can either use the C<MY_CXT> mechanism documented in L<perlxs/Safely Storing Static Data in XS> which is fast, or store the values in perl global variables, using get_sv(), which is much slower. =head2 Using call_argv Here is a Perl subroutine which prints whatever parameters are passed to it. sub PrintList { my(@list) = @_; foreach (@list) { print "$_\n" } } And here is an example of I<call_argv> which will call I<PrintList>. static char * words[] = {"alpha", "beta", "gamma", "delta", NULL}; static void call_PrintList() { call_argv("PrintList", G_DISCARD, words); } Note that it is not necessary to call C<PUSHMARK> in this instance. This is because I<call_argv> will do it for you. =head2 Using call_method Consider the following Perl code: { package Mine; sub new { my($type) = shift; bless [@_] } sub Display { my ($self, $index) = @_; print "$index: $$self[$index]\n"; } sub PrintID { my($class) = @_; print "This is Class $class version 1.0\n"; } } It implements just a very simple class to manage an array. Apart from the constructor, C<new>, it declares methods, one static and one virtual. The static method, C<PrintID>, prints out simply the class name and a version number. The virtual method, C<Display>, prints out a single element of the array. Here is an all-Perl example of using it. $a = Mine->new('red', 'green', 'blue'); $a->Display(1); Mine->PrintID; will print 1: green This is Class Mine version 1.0 Calling a Perl method from C is fairly straightforward. The following things are required: =over 5 =item * A reference to the object for a virtual method or the name of the class for a static method =item * The name of the method =item * Any other parameters specific to the method =back Here is a simple XSUB which illustrates the mechanics of calling both the C<PrintID> and C<Display> methods from C. void call_Method(ref, method, index) SV * ref char * method int index CODE: PUSHMARK(SP); EXTEND(SP, 2); PUSHs(ref); PUSHs(sv_2mortal(newSViv(index))); PUTBACK; call_method(method, G_DISCARD); void call_PrintID(class, method) char * class char * method CODE: PUSHMARK(SP); XPUSHs(sv_2mortal(newSVpv(class, 0))); PUTBACK; call_method(method, G_DISCARD); So the methods C<PrintID> and C<Display> can be invoked like this: $a = Mine->new('red', 'green', 'blue'); call_Method($a, 'Display', 1); call_PrintID('Mine', 'PrintID'); The only thing to note is that, in both the static and virtual methods, the method name is not passed via the stack--it is used as the first parameter to I<call_method>. =head2 Using GIMME_V Here is a trivial XSUB which prints the context in which it is currently executing. void PrintContext() CODE: U8 gimme = GIMME_V; if (gimme == G_VOID) printf ("Context is Void\n"); else if (gimme == G_SCALAR) printf ("Context is Scalar\n"); else printf ("Context is Array\n"); And here is some Perl to test it. PrintContext; $a = PrintContext; @a = PrintContext; The output from that will be Context is Void Context is Scalar Context is Array =head2 Using Perl to Dispose of Temporaries In the examples given to date, any temporaries created in the callback (i.e., parameters passed on the stack to the I<call_*> function or values returned via the stack) have been freed by one of these methods: =over 5 =item * Specifying the G_DISCARD flag with I<call_*> =item * Explicitly using the C<ENTER>/C<SAVETMPS>--C<FREETMPS>/C<LEAVE> pairing =back There is another method which can be used, namely letting Perl do it for you automatically whenever it regains control after the callback has terminated. This is done by simply not using the ENTER; SAVETMPS; ... FREETMPS; LEAVE; sequence in the callback (and not, of course, specifying the G_DISCARD flag). If you are going to use this method you have to be aware of a possible memory leak which can arise under very specific circumstances. To explain these circumstances you need to know a bit about the flow of control between Perl and the callback routine. The examples given at the start of the document (an error handler and an event driven program) are typical of the two main sorts of flow control that you are likely to encounter with callbacks. There is a very important distinction between them, so pay attention. In the first example, an error handler, the flow of control could be as follows. You have created an interface to an external library. Control can reach the external library like this perl --> XSUB --> external library Whilst control is in the library, an error condition occurs. You have previously set up a Perl callback to handle this situation, so it will get executed. Once the callback has finished, control will drop back to Perl again. Here is what the flow of control will be like in that situation perl --> XSUB --> external library ... error occurs ... external library --> call_* --> perl | perl <-- XSUB <-- external library <-- call_* <----+ After processing of the error using I<call_*> is completed, control reverts back to Perl more or less immediately. In the diagram, the further right you go the more deeply nested the scope is. It is only when control is back with perl on the extreme left of the diagram that you will have dropped back to the enclosing scope and any temporaries you have left hanging around will be freed. In the second example, an event driven program, the flow of control will be more like this perl --> XSUB --> event handler ... event handler --> call_* --> perl | event handler <-- call_* <----+ ... event handler --> call_* --> perl | event handler <-- call_* <----+ ... event handler --> call_* --> perl | event handler <-- call_* <----+ In this case the flow of control can consist of only the repeated sequence event handler --> call_* --> perl for practically the complete duration of the program. This means that control may I<never> drop back to the surrounding scope in Perl at the extreme left. So what is the big problem? Well, if you are expecting Perl to tidy up those temporaries for you, you might be in for a long wait. For Perl to dispose of your temporaries, control must drop back to the enclosing scope at some stage. In the event driven scenario that may never happen. This means that, as time goes on, your program will create more and more temporaries, none of which will ever be freed. As each of these temporaries consumes some memory your program will eventually consume all the available memory in your system--kapow! So here is the bottom line--if you are sure that control will revert back to the enclosing Perl scope fairly quickly after the end of your callback, then it isn't absolutely necessary to dispose explicitly of any temporaries you may have created. Mind you, if you are at all uncertain about what to do, it doesn't do any harm to tidy up anyway. =head2 Strategies for Storing Callback Context Information Potentially one of the trickiest problems to overcome when designing a callback interface can be figuring out how to store the mapping between the C callback function and the Perl equivalent. To help understand why this can be a real problem first consider how a callback is set up in an all C environment. Typically a C API will provide a function to register a callback. This will expect a pointer to a function as one of its parameters. Below is a call to a hypothetical function C<register_fatal> which registers the C function to get called when a fatal error occurs. register_fatal(cb1); The single parameter C<cb1> is a pointer to a function, so you must have defined C<cb1> in your code, say something like this static void cb1() { printf ("Fatal Error\n"); exit(1); } Now change that to call a Perl subroutine instead static SV * callback = (SV*)NULL; static void cb1() { dSP; PUSHMARK(SP); /* Call the Perl sub to process the callback */ call_sv(callback, G_DISCARD); } void register_fatal(fn) SV * fn CODE: /* Remember the Perl sub */ if (callback == (SV*)NULL) callback = newSVsv(fn); else SvSetSV(callback, fn); /* register the callback with the external library */ register_fatal(cb1); where the Perl equivalent of C<register_fatal> and the callback it registers, C<pcb1>, might look like this # Register the sub pcb1 register_fatal(\&pcb1); sub pcb1 { die "I'm dying...\n"; } The mapping between the C callback and the Perl equivalent is stored in the global variable C<callback>. This will be adequate if you ever need to have only one callback registered at any time. An example could be an error handler like the code sketched out above. Remember though, repeated calls to C<register_fatal> will replace the previously registered callback function with the new one. Say for example you want to interface to a library which allows asynchronous file i/o. In this case you may be able to register a callback whenever a read operation has completed. To be of any use we want to be able to call separate Perl subroutines for each file that is opened. As it stands, the error handler example above would not be adequate as it allows only a single callback to be defined at any time. What we require is a means of storing the mapping between the opened file and the Perl subroutine we want to be called for that file. Say the i/o library has a function C<asynch_read> which associates a C function C<ProcessRead> with a file handle C<fh>--this assumes that it has also provided some routine to open the file and so obtain the file handle. asynch_read(fh, ProcessRead) This may expect the C I<ProcessRead> function of this form void ProcessRead(fh, buffer) int fh; char * buffer; { ... } To provide a Perl interface to this library we need to be able to map between the C<fh> parameter and the Perl subroutine we want called. A hash is a convenient mechanism for storing this mapping. The code below shows a possible implementation static HV * Mapping = (HV*)NULL; void asynch_read(fh, callback) int fh SV * callback CODE: /* If the hash doesn't already exist, create it */ if (Mapping == (HV*)NULL) Mapping = newHV(); /* Save the fh -> callback mapping */ hv_store(Mapping, (char*)&fh, sizeof(fh), newSVsv(callback), 0); /* Register with the C Library */ asynch_read(fh, asynch_read_if); and C<asynch_read_if> could look like this static void asynch_read_if(fh, buffer) int fh; char * buffer; { dSP; SV ** sv; /* Get the callback associated with fh */ sv = hv_fetch(Mapping, (char*)&fh , sizeof(fh), FALSE); if (sv == (SV**)NULL) croak("Internal error...\n"); PUSHMARK(SP); EXTEND(SP, 2); PUSHs(sv_2mortal(newSViv(fh))); PUSHs(sv_2mortal(newSVpv(buffer, 0))); PUTBACK; /* Call the Perl sub */ call_sv(*sv, G_DISCARD); } For completeness, here is C<asynch_close>. This shows how to remove the entry from the hash C<Mapping>. void asynch_close(fh) int fh CODE: /* Remove the entry from the hash */ (void) hv_delete(Mapping, (char*)&fh, sizeof(fh), G_DISCARD); /* Now call the real asynch_close */ asynch_close(fh); So the Perl interface would look like this sub callback1 { my($handle, $buffer) = @_; } # Register the Perl callback asynch_read($fh, \&callback1); asynch_close($fh); The mapping between the C callback and Perl is stored in the global hash C<Mapping> this time. Using a hash has the distinct advantage that it allows an unlimited number of callbacks to be registered. What if the interface provided by the C callback doesn't contain a parameter which allows the file handle to Perl subroutine mapping? Say in the asynchronous i/o package, the callback function gets passed only the C<buffer> parameter like this void ProcessRead(buffer) char * buffer; { ... } Without the file handle there is no straightforward way to map from the C callback to the Perl subroutine. In this case a possible way around this problem is to predefine a series of C functions to act as the interface to Perl, thus #define MAX_CB 3 #define NULL_HANDLE -1 typedef void (*FnMap)(); struct MapStruct { FnMap Function; SV * PerlSub; int Handle; }; static void fn1(); static void fn2(); static void fn3(); static struct MapStruct Map [MAX_CB] = { { fn1, NULL, NULL_HANDLE }, { fn2, NULL, NULL_HANDLE }, { fn3, NULL, NULL_HANDLE } }; static void Pcb(index, buffer) int index; char * buffer; { dSP; PUSHMARK(SP); XPUSHs(sv_2mortal(newSVpv(buffer, 0))); PUTBACK; /* Call the Perl sub */ call_sv(Map[index].PerlSub, G_DISCARD); } static void fn1(buffer) char * buffer; { Pcb(0, buffer); } static void fn2(buffer) char * buffer; { Pcb(1, buffer); } static void fn3(buffer) char * buffer; { Pcb(2, buffer); } void array_asynch_read(fh, callback) int fh SV * callback CODE: int index; int null_index = MAX_CB; /* Find the same handle or an empty entry */ for (index = 0; index < MAX_CB; ++index) { if (Map[index].Handle == fh) break; if (Map[index].Handle == NULL_HANDLE) null_index = index; } if (index == MAX_CB && null_index == MAX_CB) croak ("Too many callback functions registered\n"); if (index == MAX_CB) index = null_index; /* Save the file handle */ Map[index].Handle = fh; /* Remember the Perl sub */ if (Map[index].PerlSub == (SV*)NULL) Map[index].PerlSub = newSVsv(callback); else SvSetSV(Map[index].PerlSub, callback); asynch_read(fh, Map[index].Function); void array_asynch_close(fh) int fh CODE: int index; /* Find the file handle */ for (index = 0; index < MAX_CB; ++ index) if (Map[index].Handle == fh) break; if (index == MAX_CB) croak ("could not close fh %d\n", fh); Map[index].Handle = NULL_HANDLE; SvREFCNT_dec(Map[index].PerlSub); Map[index].PerlSub = (SV*)NULL; asynch_close(fh); In this case the functions C<fn1>, C<fn2>, and C<fn3> are used to remember the Perl subroutine to be called. Each of the functions holds a separate hard-wired index which is used in the function C<Pcb> to access the C<Map> array and actually call the Perl subroutine. There are some obvious disadvantages with this technique. Firstly, the code is considerably more complex than with the previous example. Secondly, there is a hard-wired limit (in this case 3) to the number of callbacks that can exist simultaneously. The only way to increase the limit is by modifying the code to add more functions and then recompiling. None the less, as long as the number of functions is chosen with some care, it is still a workable solution and in some cases is the only one available. To summarize, here are a number of possible methods for you to consider for storing the mapping between C and the Perl callback =over 5 =item 1. Ignore the problem - Allow only 1 callback For a lot of situations, like interfacing to an error handler, this may be a perfectly adequate solution. =item 2. Create a sequence of callbacks - hard wired limit If it is impossible to tell from the parameters passed back from the C callback what the context is, then you may need to create a sequence of C callback interface functions, and store pointers to each in an array. =item 3. Use a parameter to map to the Perl callback A hash is an ideal mechanism to store the mapping between C and Perl. =back =head2 Alternate Stack Manipulation Although I have made use of only the C<POP*> macros to access values returned from Perl subroutines, it is also possible to bypass these macros and read the stack using the C<ST> macro (See L<perlxs> for a full description of the C<ST> macro). Most of the time the C<POP*> macros should be adequate; the main problem with them is that they force you to process the returned values in sequence. This may not be the most suitable way to process the values in some cases. What we want is to be able to access the stack in a random order. The C<ST> macro as used when coding an XSUB is ideal for this purpose. The code below is the example given in the section L</Returning a List of Values> recoded to use C<ST> instead of C<POP*>. static void call_AddSubtract2(a, b) int a; int b; { dSP; I32 ax; int count; ENTER; SAVETMPS; PUSHMARK(SP); EXTEND(SP, 2); PUSHs(sv_2mortal(newSViv(a))); PUSHs(sv_2mortal(newSViv(b))); PUTBACK; count = call_pv("AddSubtract", G_ARRAY); SPAGAIN; SP -= count; ax = (SP - PL_stack_base) + 1; if (count != 2) croak("Big trouble\n"); printf ("%d + %d = %d\n", a, b, SvIV(ST(0))); printf ("%d - %d = %d\n", a, b, SvIV(ST(1))); PUTBACK; FREETMPS; LEAVE; } Notes =over 5 =item 1. Notice that it was necessary to define the variable C<ax>. This is because the C<ST> macro expects it to exist. If we were in an XSUB it would not be necessary to define C<ax> as it is already defined for us. =item 2. The code SPAGAIN; SP -= count; ax = (SP - PL_stack_base) + 1; sets the stack up so that we can use the C<ST> macro. =item 3. Unlike the original coding of this example, the returned values are not accessed in reverse order. So C<ST(0)> refers to the first value returned by the Perl subroutine and C<ST(count-1)> refers to the last. =back =head2 Creating and Calling an Anonymous Subroutine in C As we've already shown, C<call_sv> can be used to invoke an anonymous subroutine. However, our example showed a Perl script invoking an XSUB to perform this operation. Let's see how it can be done inside our C code: ... SV *cvrv = eval_pv("sub { print 'You will not find me cluttering any namespace!' }", TRUE); ... call_sv(cvrv, G_VOID|G_NOARGS); C<eval_pv> is used to compile the anonymous subroutine, which will be the return value as well (read more about C<eval_pv> in L<perlapi/eval_pv>). Once this code reference is in hand, it can be mixed in with all the previous examples we've shown. =head1 LIGHTWEIGHT CALLBACKS Sometimes you need to invoke the same subroutine repeatedly. This usually happens with a function that acts on a list of values, such as Perl's built-in sort(). You can pass a comparison function to sort(), which will then be invoked for every pair of values that needs to be compared. The first() and reduce() functions from L<List::Util> follow a similar pattern. In this case it is possible to speed up the routine (often quite substantially) by using the lightweight callback API. The idea is that the calling context only needs to be created and destroyed once, and the sub can be called arbitrarily many times in between. It is usual to pass parameters using global variables (typically $_ for one parameter, or $a and $b for two parameters) rather than via @_. (It is possible to use the @_ mechanism if you know what you're doing, though there is as yet no supported API for it. It's also inherently slower.) The pattern of macro calls is like this: dMULTICALL; /* Declare local variables */ U8 gimme = G_SCALAR; /* context of the call: G_SCALAR, * G_ARRAY, or G_VOID */ PUSH_MULTICALL(cv); /* Set up the context for calling cv, and set local vars appropriately */ /* loop */ { /* set the value(s) af your parameter variables */ MULTICALL; /* Make the actual call */ } /* end of loop */ POP_MULTICALL; /* Tear down the calling context */ For some concrete examples, see the implementation of the first() and reduce() functions of List::Util 1.18. There you will also find a header file that emulates the multicall API on older versions of perl. =head1 SEE ALSO L<perlxs>, L<perlguts>, L<perlembed> =head1 AUTHOR Paul Marquess Special thanks to the following people who assisted in the creation of the document. Jeff Okamoto, Tim Bunce, Nick Gianniotis, Steve Kelem, Gurusamy Sarathy and Larry Wall. =head1 DATE Last updated for perl 5.23.1. perl5124delta.pod 0000644 00000007130 15125556335 0007553 0 ustar 00 =encoding utf8 =head1 NAME perl5124delta - what is new for perl v5.12.4 =head1 DESCRIPTION This document describes differences between the 5.12.3 release and the 5.12.4 release. If you are upgrading from an earlier release such as 5.12.2, first read L<perl5123delta>, which describes differences between 5.12.2 and 5.12.3. The major changes made in 5.12.0 are described in L<perl5120delta>. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.12.3. If any exist, they are bugs and reports are welcome. =head1 Selected Bug Fixes When strict "refs" mode is off, C<%{...}> in rvalue context returns C<undef> if its argument is undefined. An optimisation introduced in Perl 5.12.0 to make C<keys %{...}> faster when used as a boolean did not take this into account, causing C<keys %{+undef}> (and C<keys %$foo> when C<$foo> is undefined) to be an error, which it should be so in strict mode only [perl #81750]. C<lc>, C<uc>, C<lcfirst>, and C<ucfirst> no longer return untainted strings when the argument is tainted. This has been broken since perl 5.8.9 [perl #87336]. Fixed a case where it was possible that a freed buffer may have been read from when parsing a here document. =head1 Modules and Pragmata L<Module::CoreList> has been upgraded from version 2.43 to 2.50. =head1 Testing The F<cpan/CGI/t/http.t> test script has been fixed to work when the environment has HTTPS_* environment variables, such as HTTPS_PROXY. =head1 Documentation Updated the documentation for rand() in L<perlfunc> to note that it is not cryptographically secure. =head1 Platform Specific Notes =over 4 =item Linux Support Ubuntu 11.04's new multi-arch library layout. =back =head1 Acknowledgements Perl 5.12.4 represents approximately 5 months of development since Perl 5.12.3 and contains approximately 200 lines of changes across 11 files from 8 authors. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.12.4: Andy Dougherty, David Golden, David Leadbeater, Father Chrysostomos, Florian Ragwitz, Jesse Vincent, Leon Brocard, Zsbán Ambrus. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlhpux.pod 0000644 00000073621 15125556335 0007142 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specially designed to be readable as is. =head1 NAME perlhpux - Perl version 5 on Hewlett-Packard Unix (HP-UX) systems =head1 DESCRIPTION This document describes various features of HP's Unix operating system (HP-UX) that will affect how Perl version 5 (hereafter just Perl) is compiled and/or runs. =head2 Using perl as shipped with HP-UX Application release September 2001, HP-UX 11.00 is the first to ship with Perl. By the time it was perl-5.6.1 in /opt/perl. The first occurrence is on CD 5012-7954 and can be installed using swinstall -s /cdrom perl assuming you have mounted that CD on /cdrom. That build was a portable hppa-1.1 multithread build that supports large files compiled with gcc-2.9-hppa-991112. If you perform a new installation, then (a newer) Perl will be installed automatically. Pre-installed HP-UX systems now have more recent versions of Perl and the updated modules. The official (threaded) builds from HP, as they are shipped on the Application DVD/CD's are available on L<http://www.software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=PERL> for both PA-RISC and IPF (Itanium Processor Family). They are built with the HP ANSI-C compiler. Up till 5.8.8 that was done by ActiveState. To see what version is included on the DVD (assumed here to be mounted on /cdrom), issue this command: # swlist -s /cdrom perl # perl D.5.8.8.B 5.8.8 Perl Programming Language perl.Perl5-32 D.5.8.8.B 32-bit 5.8.8 Perl Programming Language with Extensions perl.Perl5-64 D.5.8.8.B 64-bit 5.8.8 Perl Programming Language with Extensions To see what is installed on your system: # swlist -R perl # perl E.5.8.8.J Perl Programming Language # perl.Perl5-32 E.5.8.8.J 32-bit Perl Programming Language with Extensions perl.Perl5-32.PERL-MAN E.5.8.8.J 32-bit Perl Man Pages for IA perl.Perl5-32.PERL-RUN E.5.8.8.J 32-bit Perl Binaries for IA # perl.Perl5-64 E.5.8.8.J 64-bit Perl Programming Language with Extensions perl.Perl5-64.PERL-MAN E.5.8.8.J 64-bit Perl Man Pages for IA perl.Perl5-64.PERL-RUN E.5.8.8.J 64-bit Perl Binaries for IA =head2 Using perl from HP's porting centre HP porting centre tries to keep up with customer demand and release updates from the Open Source community. Having precompiled Perl binaries available is obvious, though "up-to-date" is something relative. At the moment of writing perl-5.10.1 and 5.28.0 were available. The HP porting centres are limited in what systems they are allowed to port to and they usually choose the two most recent OS versions available. HP has asked the porting centre to move Open Source binaries from /opt to /usr/local, so binaries produced since the start of July 2002 are located in /usr/local. One of HP porting centres URL's is L<http://hpux.connect.org.uk/> The port currently available is built with GNU gcc. As porting modern GNU gcc is extremely hard on HP-UX, they are stuck at version gcc-4.2.3. =head2 Other prebuilt perl binaries To get more perl depots for the whole range of HP-UX, visit H.Merijn Brand's site at L<http://mirrors.develooper.com/hpux/#Perl>. Carefully read the notes to see if the available versions suit your needs. =head2 Compiling Perl 5 on HP-UX When compiling Perl, you must use an ANSI C compiler. The C compiler that ships with all HP-UX systems is a K&R compiler that should only be used to build new kernels. Perl can be compiled with either HP's ANSI C compiler or with gcc. The former is recommended, as not only can it compile Perl with no difficulty, but also can take advantage of features listed later that require the use of HP compiler-specific command-line flags. If you decide to use gcc, make sure your installation is recent and complete, and be sure to read the Perl INSTALL file for more gcc-specific details. =head2 PA-RISC The last and final version of PA-RISC is 2.0, HP no longer sells any system with these CPU's. HP's HP9000 Unix systems run on HP's own Precision Architecture (PA-RISC) chip. HP-UX used to run on the Motorola MC68000 family of chips, but any machine with this chip in it is quite obsolete and this document will not attempt to address issues for compiling Perl on the Motorola chipset. Even though PA-RISC hardware is not sold anymore, a lot of machines still running on these CPU's can be found in the wild. The last order date for HP 9000 systems was December 31, 2008. HP PA-RISC systems are usually referred to with model description "HP 9000". The last CPU in this series is the PA-8900. Support for PA-RISC architectured machines officially ended as shown in the following table: PA-RISC End-of-Life Roadmap +--------+----------------+----------------+-----------------+ | HP9000 | Superdome | PA-8700 | Spring 2011 | | 4-128 | | PA-8800/sx1000 | Summer 2012 | | cores | | PA-8900/sx1000 | 2014 | | | | PA-8900/sx2000 | 2015 | +--------+----------------+----------------+-----------------+ | HP9000 | rp7410, rp8400 | PA-8700 | Spring 2011 | | 2-32 | rp7420, rp8420 | PA-8800/sx1000 | 2012 | | cores | rp7440, rp8440 | PA-8900/sx1000 | Autumn 2013 | | | | PA-8900/sx2000 | 2015 | +--------+----------------+----------------+-----------------+ | HP9000 | rp44x0 | PA-8700 | Spring 2011 | | 1-8 | | PA-8800/rp44x0 | 2012 | | cores | | PA-8900/rp44x0 | 2014 | +--------+----------------+----------------+-----------------+ | HP9000 | rp34x0 | PA-8700 | Spring 2011 | | 1-4 | | PA-8800/rp34x0 | 2012 | | cores | | PA-8900/rp34x0 | 2014 | +--------+----------------+----------------+-----------------+ A complete list of models at the time the OS was built is in the file /usr/sam/lib/mo/sched.models. The first column corresponds to the last part of the output of the "model" command. The second column is the PA-RISC version and the third column is the exact chip type used. (Start browsing at the bottom to prevent confusion ;-) # model 9000/800/L1000-44 # grep L1000-44 /usr/sam/lib/mo/sched.models L1000-44 2.0 PA8500 =head2 PA-RISC 1.0 The original version of PA-RISC, HP no longer sells any system with this chip. The following systems contained PA-RISC 1.0 chips: 600, 635, 645, 808, 815, 822, 825, 832, 834, 835, 840, 842, 845, 850, 852, 855, 860, 865, 870, 890 =head2 PA-RISC 1.1 An upgrade to the PA-RISC design, it shipped for many years in many different system. The following systems contain with PA-RISC 1.1 chips: 705, 710, 712, 715, 720, 722, 725, 728, 730, 735, 742, 743, 744, 745, 747, 750, 755, 770, 777, 778, 779, 800, 801, 803, 806, 807, 809, 811, 813, 816, 817, 819, 821, 826, 827, 829, 831, 837, 839, 841, 847, 849, 851, 856, 857, 859, 867, 869, 877, 887, 891, 892, 897, A180, A180C, B115, B120, B132L, B132L+, B160L, B180L, C100, C110, C115, C120, C160L, D200, D210, D220, D230, D250, D260, D310, D320, D330, D350, D360, D410, DX0, DX5, DXO, E25, E35, E45, E55, F10, F20, F30, G30, G40, G50, G60, G70, H20, H30, H40, H50, H60, H70, I30, I40, I50, I60, I70, J200, J210, J210XC, K100, K200, K210, K220, K230, K400, K410, K420, S700i, S715, S744, S760, T500, T520 =head2 PA-RISC 2.0 The most recent upgrade to the PA-RISC design, it added support for 64-bit integer data. As of the date of this document's last update, the following systems contain PA-RISC 2.0 chips: 700, 780, 781, 782, 783, 785, 802, 804, 810, 820, 861, 871, 879, 889, 893, 895, 896, 898, 899, A400, A500, B1000, B2000, C130, C140, C160, C180, C180+, C180-XP, C200+, C400+, C3000, C360, C3600, CB260, D270, D280, D370, D380, D390, D650, J220, J2240, J280, J282, J400, J410, J5000, J5500XM, J5600, J7000, J7600, K250, K260, K260-EG, K270, K360, K370, K380, K450, K460, K460-EG, K460-XP, K470, K570, K580, L1000, L2000, L3000, N4000, R380, R390, SD16000, SD32000, SD64000, T540, T600, V2000, V2200, V2250, V2500, V2600 Just before HP took over Compaq, some systems were renamed. the link that contained the explanation is dead, so here's a short summary: HP 9000 A-Class servers, now renamed HP Server rp2400 series. HP 9000 L-Class servers, now renamed HP Server rp5400 series. HP 9000 N-Class servers, now renamed HP Server rp7400. rp2400, rp2405, rp2430, rp2450, rp2470, rp3410, rp3440, rp4410, rp4440, rp5400, rp5405, rp5430, rp5450, rp5470, rp7400, rp7405, rp7410, rp7420, rp7440, rp8400, rp8420, rp8440, Superdome The current naming convention is: aadddd ||||`+- 00 - 99 relative capacity & newness (upgrades, etc.) |||`--- unique number for each architecture to ensure different ||| systems do not have the same numbering across ||| architectures ||`---- 1 - 9 identifies family and/or relative positioning || |`----- c = ia32 (cisc) | p = pa-risc | x = ia-64 (Itanium & Itanium 2) | h = housing `------ t = tower r = rack optimized s = super scalable b = blade sa = appliance =head2 Portability Between PA-RISC Versions An executable compiled on a PA-RISC 2.0 platform will not execute on a PA-RISC 1.1 platform, even if they are running the same version of HP-UX. If you are building Perl on a PA-RISC 2.0 platform and want that Perl to also run on a PA-RISC 1.1, the compiler flags +DAportable and +DS32 should be used. It is no longer possible to compile PA-RISC 1.0 executables on either the PA-RISC 1.1 or 2.0 platforms. The command-line flags are accepted, but the resulting executable will not run when transferred to a PA-RISC 1.0 system. =head2 Itanium Processor Family (IPF) and HP-UX HP-UX also runs on the newer Itanium processor. This requires the use of HP-UX version 11.23 (11i v2) or 11.31 (11i v3), and with the exception of a few differences detailed below and in later sections, Perl should compile with no problems. Although PA-RISC binaries can run on Itanium systems, you should not attempt to use a PA-RISC version of Perl on an Itanium system. This is because shared libraries created on an Itanium system cannot be loaded while running a PA-RISC executable. HP Itanium 2 systems are usually referred to with model description "HP Integrity". =head2 Itanium, Itanium 2 & Madison 6 HP also ships servers with the 128-bit Itanium processor(s). The cx26x0 is told to have Madison 6. As of the date of this document's last update, the following systems contain Itanium or Itanium 2 chips (this is likely to be out of date): BL60p, BL860c, BL870c, BL890c, cx2600, cx2620, rx1600, rx1620, rx2600, rx2600hptc, rx2620, rx2660, rx2800, rx3600, rx4610, rx4640, rx5670, rx6600, rx7420, rx7620, rx7640, rx8420, rx8620, rx8640, rx9610, sx1000, sx2000 To see all about your machine, type # model ia64 hp server rx2600 # /usr/contrib/bin/machinfo =head2 HP-UX versions Not all architectures (PA = PA-RISC, IPF = Itanium Processor Family) support all versions of HP-UX, here is a short list HP-UX version Kernel Architecture End-of-factory support ------------- ------ ------------ ---------------------------------- 10.20 32 bit PA 30-Jun-2003 11.00 32/64 PA 31-Dec-2006 11.11 11i v1 32/64 PA 31-Dec-2015 11.22 11i v2 64 IPF 30-Apr-2004 11.23 11i v2 64 PA & IPF 31-Dec-2015 11.31 11i v3 64 PA & IPF 31-Dec-2020 (PA) 31-Dec-2025 (IPF) See for the full list of hardware/OS support and expected end-of-life L<https://h20195.www2.hpe.com/V2/getpdf.aspx/4AA4-7673ENW.pdf> =head2 Building Dynamic Extensions on HP-UX HP-UX supports dynamically loadable libraries (shared libraries). Shared libraries end with the suffix .sl. On Itanium systems, they end with the suffix .so. Shared libraries created on a platform using a particular PA-RISC version are not usable on platforms using an earlier PA-RISC version by default. However, this backwards compatibility may be enabled using the same +DAportable compiler flag (with the same PA-RISC 1.0 caveat mentioned above). Shared libraries created on an Itanium platform cannot be loaded on a PA-RISC platform. Shared libraries created on a PA-RISC platform can only be loaded on an Itanium platform if it is a PA-RISC executable that is attempting to load the PA-RISC library. A PA-RISC shared library cannot be loaded into an Itanium executable nor vice-versa. To create a shared library, the following steps must be performed: 1. Compile source modules with +z or +Z flag to create a .o module which contains Position-Independent Code (PIC). The linker will tell you in the next step if +Z was needed. (For gcc, the appropriate flag is -fpic or -fPIC.) 2. Link the shared library using the -b flag. If the code calls any functions in other system libraries (e.g., libm), it must be included on this line. (Note that these steps are usually handled automatically by the extension's Makefile). If these dependent libraries are not listed at shared library creation time, you will get fatal "Unresolved symbol" errors at run time when the library is loaded. You may create a shared library that refers to another library, which may be either an archive library or a shared library. If this second library is a shared library, this is called a "dependent library". The dependent library's name is recorded in the main shared library, but it is not linked into the shared library. Instead, it is loaded when the main shared library is loaded. This can cause problems if you build an extension on one system and move it to another system where the libraries may not be located in the same place as on the first system. If the referred library is an archive library, then it is treated as a simple collection of .o modules (all of which must contain PIC). These modules are then linked into the shared library. Note that it is okay to create a library which contains a dependent library that is already linked into perl. Some extensions, like DB_File and Compress::Zlib use/require prebuilt libraries for the perl extensions/modules to work. If these libraries are built using the default configuration, it might happen that you run into an error like "invalid loader fixup" during load phase. HP is aware of this problem. Search the HP-UX cxx-dev forums for discussions about the subject. The short answer is that B<everything> (all libraries, everything) must be compiled with C<+z> or C<+Z> to be PIC (position independent code). (For gcc, that would be C<-fpic> or C<-fPIC>). In HP-UX 11.00 or newer the linker error message should tell the name of the offending object file. A more general approach is to intervene manually, as with an example for the DB_File module, which requires SleepyCat's libdb.sl: # cd .../db-3.2.9/build_unix # vi Makefile ... add +Z to all cflags to create shared objects CFLAGS= -c $(CPPFLAGS) +Z -Ae +O2 +Onolimit \ -I/usr/local/include -I/usr/include/X11R6 CXXFLAGS= -c $(CPPFLAGS) +Z -Ae +O2 +Onolimit \ -I/usr/local/include -I/usr/include/X11R6 # make clean # make # mkdir tmp # cd tmp # ar x ../libdb.a # ld -b -o libdb-3.2.sl *.o # mv libdb-3.2.sl /usr/local/lib # rm *.o # cd /usr/local/lib # rm -f libdb.sl # ln -s libdb-3.2.sl libdb.sl # cd .../DB_File-1.76 # make distclean # perl Makefile.PL # make # make test # make install As of db-4.2.x it is no longer needed to do this by hand. Sleepycat has changed the configuration process to add +z on HP-UX automatically. # cd .../db-4.2.25/build_unix # env CFLAGS=+DD64 LDFLAGS=+DD64 ../dist/configure should work to generate 64bit shared libraries for HP-UX 11.00 and 11i. It is no longer possible to link PA-RISC 1.0 shared libraries (even though the command-line flags are still present). PA-RISC and Itanium object files are not interchangeable. Although you may be able to use ar to create an archive library of PA-RISC object files on an Itanium system, you cannot link against it using an Itanium link editor. =head2 The HP ANSI C Compiler When using this compiler to build Perl, you should make sure that the flag -Aa is added to the cpprun and cppstdin variables in the config.sh file (though see the section on 64-bit perl below). If you are using a recent version of the Perl distribution, these flags are set automatically. Even though HP-UX 10.20 and 11.00 are not actively maintained by HP anymore, updates for the HP ANSI C compiler are still available from time to time, and it might be advisable to see if updates are applicable. At the moment of writing, the latests available patches for 11.00 that should be applied are PHSS_35098, PHSS_35175, PHSS_35100, PHSS_33036, and PHSS_33902). If you have a SUM account, you can use it to search for updates/patches. Enter "ANSI" as keyword. =head2 The GNU C Compiler When you are going to use the GNU C compiler (gcc), and you don't have gcc yet, you can either build it yourself (if you feel masochistic enough) from the sources (available from e.g. L<http://gcc.gnu.org/mirrors.html>) or fetch a prebuilt binary from the HP porting center at L<http://hpux.connect.org.uk/hppd/cgi-bin/search?term=gcc&Search=Search> or from the DSPP (you need to be a member) at L<http://h21007.www2.hp.com/portal/site/dspp/menuitem.863c3e4cbcdc3f3515b49c108973a801?ciid=2a08725cc2f02110725cc2f02110275d6e10RCRD&jumpid=reg_r1002_usen_c-001_title_r0001> (Browse through the list, because there are often multiple versions of the same package available). Most mentioned distributions are depots. H.Merijn Brand has made prebuilt gcc binaries available on L<http://mirrors.develooper.com/hpux/> and/or L<http://www.cmve.net/~merijn/> for HP-UX 10.20 (only 32bit), HP-UX 11.00, HP-UX 11.11 (HP-UX 11i v1), and HP-UX 11.23 (HP-UX 11i v2 PA-RISC) in both 32- and 64-bit versions. For HP-UX 11.23 IPF and HP-UX 11.31 IPF depots are available too. The IPF versions do not need two versions of GNU gcc. On PA-RISC you need a different compiler for 32-bit applications and for 64-bit applications. On PA-RISC, 32-bit objects and 64-bit objects do not mix. Period. There is no different behaviour for HP C-ANSI-C or GNU gcc. So if you require your perl binary to use 64-bit libraries, like Oracle-64bit, you MUST build a 64-bit perl. Building a 64-bit capable gcc on PA-RISC from source is possible only when you have the HP C-ANSI C compiler or an already working 64-bit binary of gcc available. Best performance for perl is achieved with HP's native compiler. =head2 Using Large Files with Perl on HP-UX Beginning with HP-UX version 10.20, files larger than 2GB (2^31 bytes) may be created and manipulated. Three separate methods of doing this are available. Of these methods, the best method for Perl is to compile using the -Duselargefiles flag to Configure. This causes Perl to be compiled using structures and functions in which these are 64 bits wide, rather than 32 bits wide. (Note that this will only work with HP's ANSI C compiler. If you want to compile Perl using gcc, you will have to get a version of the compiler that supports 64-bit operations. See above for where to find it.) There are some drawbacks to this approach. One is that any extension which calls any file-manipulating C function will need to be recompiled (just follow the usual "perl Makefile.PL; make; make test; make install" procedure). The list of functions that will need to recompiled is: creat, fgetpos, fopen, freopen, fsetpos, fstat, fstatvfs, fstatvfsdev, ftruncate, ftw, lockf, lseek, lstat, mmap, nftw, open, prealloc, stat, statvfs, statvfsdev, tmpfile, truncate, getrlimit, setrlimit Another drawback is only valid for Perl versions before 5.6.0. This drawback is that the seek and tell functions (both the builtin version and POSIX module version) will not perform correctly. It is strongly recommended that you use this flag when you run Configure. If you do not do this, but later answer the question about large files when Configure asks you, you may get a configuration that cannot be compiled, or that does not function as expected. =head2 Threaded Perl on HP-UX It is possible to compile a version of threaded Perl on any version of HP-UX before 10.30, but it is strongly suggested that you be running on HP-UX 11.00 at least. To compile Perl with threads, add -Dusethreads to the arguments of Configure. Verify that the -D_POSIX_C_SOURCE=199506L compiler flag is automatically added to the list of flags. Also make sure that -lpthread is listed before -lc in the list of libraries to link Perl with. The hints provided for HP-UX during Configure will try very hard to get this right for you. HP-UX versions before 10.30 require a separate installation of a POSIX threads library package. Two examples are the HP DCE package, available on "HP-UX Hardware Extensions 3.0, Install and Core OS, Release 10.20, April 1999 (B3920-13941)" or the Freely available PTH package, available on H.Merijn's site (L<http://mirrors.develooper.com/hpux/>). The use of PTH will be unsupported in perl-5.12 and up and is rather buggy in 5.11.x. If you are going to use the HP DCE package, the library used for threading is /usr/lib/libcma.sl, but there have been multiple updates of that library over time. Perl will build with the first version, but it will not pass the test suite. Older Oracle versions might be a compelling reason not to update that library, otherwise please find a newer version in one of the following patches: PHSS_19739, PHSS_20608, or PHSS_23672 reformatted output: d3:/usr/lib 106 > what libcma-*.1 libcma-00000.1: HP DCE/9000 1.5 Module: libcma.sl (Export) Date: Apr 29 1996 22:11:24 libcma-19739.1: HP DCE/9000 1.5 PHSS_19739-40 Module: libcma.sl (Export) Date: Sep 4 1999 01:59:07 libcma-20608.1: HP DCE/9000 1.5 PHSS_20608 Module: libcma.1 (Export) Date: Dec 8 1999 18:41:23 libcma-23672.1: HP DCE/9000 1.5 PHSS_23672 Module: libcma.1 (Export) Date: Apr 9 2001 10:01:06 d3:/usr/lib 107 > If you choose for the PTH package, use swinstall to install pth in the default location (/opt/pth), and then make symbolic links to the libraries from /usr/lib # cd /usr/lib # ln -s /opt/pth/lib/libpth* . For building perl to support Oracle, it needs to be linked with libcl and libpthread. So even if your perl is an unthreaded build, these libraries might be required. See "Oracle on HP-UX" below. =head2 64-bit Perl on HP-UX Beginning with HP-UX 11.00, programs compiled under HP-UX can take advantage of the LP64 programming environment (LP64 means Longs and Pointers are 64 bits wide), in which scalar variables will be able to hold numbers larger than 2^32 with complete precision. Perl has proven to be consistent and reliable in 64bit mode since 5.8.1 on all HP-UX 11.xx. As of the date of this document, Perl is fully 64-bit compliant on HP-UX 11.00 and up for both cc- and gcc builds. If you are about to build a 64-bit perl with GNU gcc, please read the gcc section carefully. Should a user have the need for compiling Perl in the LP64 environment, use the -Duse64bitall flag to Configure. This will force Perl to be compiled in a pure LP64 environment (with the +DD64 flag for HP C-ANSI-C, with no additional options for GNU gcc 64-bit on PA-RISC, and with -mlp64 for GNU gcc on Itanium). If you want to compile Perl using gcc, you will have to get a version of the compiler that supports 64-bit operations.) You can also use the -Duse64bitint flag to Configure. Although there are some minor differences between compiling Perl with this flag versus the -Duse64bitall flag, they should not be noticeable from a Perl user's perspective. When configuring -Duse64bitint using a 64bit gcc on a pa-risc architecture, -Duse64bitint is silently promoted to -Duse64bitall. In both cases, it is strongly recommended that you use these flags when you run Configure. If you do not use do this, but later answer the questions about 64-bit numbers when Configure asks you, you may get a configuration that cannot be compiled, or that does not function as expected. =head2 Oracle on HP-UX Using perl to connect to Oracle databases through DBI and DBD::Oracle has caused a lot of people many headaches. Read README.hpux in the DBD::Oracle for much more information. The reason to mention it here is that Oracle requires a perl built with libcl and libpthread, the latter even when perl is build without threads. Building perl using all defaults, but still enabling to build DBD::Oracle later on can be achieved using Configure -A prepend:libswanted='cl pthread ' ... Do not forget the space before the trailing quote. Also note that this does not (yet) work with all configurations, it is known to fail with 64-bit versions of GCC. =head2 GDBM and Threads on HP-UX If you attempt to compile Perl with (POSIX) threads on an 11.X system and also link in the GDBM library, then Perl will immediately core dump when it starts up. The only workaround at this point is to relink the GDBM library under 11.X, then relink it into Perl. the error might show something like: Pthread internal error: message: __libc_reinit() failed, file: ../pthreads/pthread.c, line: 1096 Return Pointer is 0xc082bf33 sh: 5345 Quit(coredump) and Configure will give up. =head2 NFS filesystems and utime(2) on HP-UX If you are compiling Perl on a remotely-mounted NFS filesystem, the test io/fs.t may fail on test #18. This appears to be a bug in HP-UX and no fix is currently available. =head2 HP-UX Kernel Parameters (maxdsiz) for Compiling Perl By default, HP-UX comes configured with a maximum data segment size of 64MB. This is too small to correctly compile Perl with the maximum optimization levels. You can increase the size of the maxdsiz kernel parameter through the use of SAM. When using the GUI version of SAM, click on the Kernel Configuration icon, then the Configurable Parameters icon. Scroll down and select the maxdsiz line. From the Actions menu, select the Modify Configurable Parameter item. Insert the new formula into the Formula/Value box. Then follow the instructions to rebuild your kernel and reboot your system. In general, a value of 256MB (or "256*1024*1024") is sufficient for Perl to compile at maximum optimization. =head1 nss_delete core dump from op/pwent or op/grent You may get a bus error core dump from the op/pwent or op/grent tests. If compiled with -g you will see a stack trace much like the following: #0 0xc004216c in () from /usr/lib/libc.2 #1 0xc00d7550 in __nss_src_state_destr () from /usr/lib/libc.2 #2 0xc00d7768 in __nss_src_state_destr () from /usr/lib/libc.2 #3 0xc00d78a8 in nss_delete () from /usr/lib/libc.2 #4 0xc01126d8 in endpwent () from /usr/lib/libc.2 #5 0xd1950 in Perl_pp_epwent () from ./perl #6 0x94d3c in Perl_runops_standard () from ./perl #7 0x23728 in S_run_body () from ./perl #8 0x23428 in perl_run () from ./perl #9 0x2005c in main () from ./perl The key here is the C<nss_delete> call. One workaround for this bug seems to be to create add to the file F</etc/nsswitch.conf> (at least) the following lines group: files passwd: files Whether you are using NIS does not matter. Amazingly enough, the same bug also affects Solaris. =head1 error: pasting ")" and "l" does not give a valid preprocessing token There seems to be a broken system header file in HP-UX 11.00 that breaks perl building in 32bit mode with GNU gcc-4.x causing this error. The same file for HP-UX 11.11 (even though the file is older) does not show this failure, and has the correct definition, so the best fix is to patch the header to match: --- /usr/include/inttypes.h 2001-04-20 18:42:14 +0200 +++ /usr/include/inttypes.h 2000-11-14 09:00:00 +0200 @@ -72,7 +72,7 @@ #define UINT32_C(__c) __CONCAT_U__(__c) #else /* __LP64 */ #define INT32_C(__c) __CONCAT__(__c,l) -#define UINT32_C(__c) __CONCAT__(__CONCAT_U__(__c),l) +#define UINT32_C(__c) __CONCAT__(__c,ul) #endif /* __LP64 */ #define INT64_C(__c) __CONCAT_L__(__c,l) =head1 Redeclaration of "sendpath" with a different storage class specifier The following compilation warnings may happen in HP-UX releases earlier than 11.31 but are harmless: cc: "/usr/include/sys/socket.h", line 535: warning 562: Redeclaration of "sendfile" with a different storage class specifier: "sendfile" will have internal linkage. cc: "/usr/include/sys/socket.h", line 536: warning 562: Redeclaration of "sendpath" with a different storage class specifier: "sendpath" will have internal linkage. They seem to be caused by broken system header files, and also other open source projects are seeing them. The following HP-UX patches should make the warnings go away: CR JAGae12001: PHNE_27063 Warning 562 on sys/socket.h due to redeclaration of prototypes CR JAGae16787: Warning 562 from socket.h sendpath/sendfile -D_FILEFFSET_BITS=64 CR JAGae73470 (11.23) ER: Compiling socket.h with cc -D_FILEFFSET_BITS=64 warning 267/562 =head1 Miscellaneous HP-UX 11 Y2K patch "Y2K-1100 B.11.00.B0125 HP-UX Core OS Year 2000 Patch Bundle" has been reported to break the io/fs test #18 which tests whether utime() can change timestamps. The Y2K patch seems to break utime() so that over NFS the timestamps do not get changed (on local filesystems utime() still works). This has probably been fixed on your system by now. =head1 AUTHOR H.Merijn Brand <h.m.brand@xs4all.nl> Jeff Okamoto <okamoto@corp.hp.com> With much assistance regarding shared libraries from Marc Sabatella. =cut perldbmfilter.pod 0000644 00000011565 15125556335 0010125 0 ustar 00 =head1 NAME perldbmfilter - Perl DBM Filters =head1 SYNOPSIS $db = tie %hash, 'DBM', ... $old_filter = $db->filter_store_key ( sub { ... } ); $old_filter = $db->filter_store_value( sub { ... } ); $old_filter = $db->filter_fetch_key ( sub { ... } ); $old_filter = $db->filter_fetch_value( sub { ... } ); =head1 DESCRIPTION The four C<filter_*> methods shown above are available in all the DBM modules that ship with Perl, namely DB_File, GDBM_File, NDBM_File, ODBM_File and SDBM_File. Each of the methods works identically, and is used to install (or uninstall) a single DBM Filter. The only difference between them is the place that the filter is installed. To summarise: =over 5 =item B<filter_store_key> If a filter has been installed with this method, it will be invoked every time you write a key to a DBM database. =item B<filter_store_value> If a filter has been installed with this method, it will be invoked every time you write a value to a DBM database. =item B<filter_fetch_key> If a filter has been installed with this method, it will be invoked every time you read a key from a DBM database. =item B<filter_fetch_value> If a filter has been installed with this method, it will be invoked every time you read a value from a DBM database. =back You can use any combination of the methods from none to all four. All filter methods return the existing filter, if present, or C<undef> if not. To delete a filter pass C<undef> to it. =head2 The Filter When each filter is called by Perl, a local copy of C<$_> will contain the key or value to be filtered. Filtering is achieved by modifying the contents of C<$_>. The return code from the filter is ignored. =head2 An Example: the NULL termination problem. DBM Filters are useful for a class of problems where you I<always> want to make the same transformation to all keys, all values or both. For example, consider the following scenario. You have a DBM database that you need to share with a third-party C application. The C application assumes that I<all> keys and values are NULL terminated. Unfortunately when Perl writes to DBM databases it doesn't use NULL termination, so your Perl application will have to manage NULL termination itself. When you write to the database you will have to use something like this: $hash{"$key\0"} = "$value\0"; Similarly the NULL needs to be taken into account when you are considering the length of existing keys/values. It would be much better if you could ignore the NULL terminations issue in the main application code and have a mechanism that automatically added the terminating NULL to all keys and values whenever you write to the database and have them removed when you read from the database. As I'm sure you have already guessed, this is a problem that DBM Filters can fix very easily. use strict; use warnings; use SDBM_File; use Fcntl; my %hash; my $filename = "filt"; unlink $filename; my $db = tie(%hash, 'SDBM_File', $filename, O_RDWR|O_CREAT, 0640) or die "Cannot open $filename: $!\n"; # Install DBM Filters $db->filter_fetch_key ( sub { s/\0$// } ); $db->filter_store_key ( sub { $_ .= "\0" } ); $db->filter_fetch_value( sub { no warnings 'uninitialized'; s/\0$// } ); $db->filter_store_value( sub { $_ .= "\0" } ); $hash{"abc"} = "def"; my $a = $hash{"ABC"}; # ... undef $db; untie %hash; The code above uses SDBM_File, but it will work with any of the DBM modules. Hopefully the contents of each of the filters should be self-explanatory. Both "fetch" filters remove the terminating NULL, and both "store" filters add a terminating NULL. =head2 Another Example: Key is a C int. Here is another real-life example. By default, whenever Perl writes to a DBM database it always writes the key and value as strings. So when you use this: $hash{12345} = "something"; the key 12345 will get stored in the DBM database as the 5 byte string "12345". If you actually want the key to be stored in the DBM database as a C int, you will have to use C<pack> when writing, and C<unpack> when reading. Here is a DBM Filter that does it: use strict; use warnings; use DB_File; my %hash; my $filename = "filt"; unlink $filename; my $db = tie %hash, 'DB_File', $filename, O_CREAT|O_RDWR, 0666, $DB_HASH or die "Cannot open $filename: $!\n"; $db->filter_fetch_key ( sub { $_ = unpack("i", $_) } ); $db->filter_store_key ( sub { $_ = pack ("i", $_) } ); $hash{123} = "def"; # ... undef $db; untie %hash; The code above uses DB_File, but again it will work with any of the DBM modules. This time only two filters have been used; we only need to manipulate the contents of the key, so it wasn't necessary to install any value filters. =head1 SEE ALSO L<DB_File>, L<GDBM_File>, L<NDBM_File>, L<ODBM_File> and L<SDBM_File>. =head1 AUTHOR Paul Marquess perldiag.pod 0000644 00001104032 15125556335 0007052 0 ustar 00 =head1 NAME perldiag - various Perl diagnostics =head1 DESCRIPTION These messages are classified as follows (listed in increasing order of desperation): (W) A warning (optional). (D) A deprecation (enabled by default). (S) A severe warning (enabled by default). (F) A fatal error (trappable). (P) An internal error you should never see (trappable). (X) A very fatal error (nontrappable). (A) An alien error message (not generated by Perl). The majority of messages from the first three classifications above (W, D & S) can be controlled using the C<warnings> pragma. If a message can be controlled by the C<warnings> pragma, its warning category is included with the classification letter in the description below. E.g. C<(W closed)> means a warning in the C<closed> category. Optional warnings are enabled by using the C<warnings> pragma or the B<-w> and B<-W> switches. Warnings may be captured by setting C<$SIG{__WARN__}> to a reference to a routine that will be called on each warning instead of printing it. See L<perlvar>. Severe warnings are always enabled, unless they are explicitly disabled with the C<warnings> pragma or the B<-X> switch. Trappable errors may be trapped using the eval operator. See L<perlfunc/eval>. In almost all cases, warnings may be selectively disabled or promoted to fatal errors using the C<warnings> pragma. See L<warnings>. The messages are in alphabetical order, without regard to upper or lower-case. Some of these messages are generic. Spots that vary are denoted with a %s or other printf-style escape. These escapes are ignored by the alphabetical order, as are all characters other than letters. To look up your message, just ignore anything that is not a letter. =over 4 =item accept() on closed socket %s (W closed) You tried to do an accept on a closed socket. Did you forget to check the return value of your socket() call? See L<perlfunc/accept>. =item Aliasing via reference is experimental (S experimental::refaliasing) This warning is emitted if you use a reference constructor on the left-hand side of an assignment to alias one variable to another. Simply suppress the warning if you want to use the feature, but know that in doing so you are taking the risk of using an experimental feature which may change or be removed in a future Perl version: no warnings "experimental::refaliasing"; use feature "refaliasing"; \$x = \$y; =item Allocation too large: %x (X) You can't allocate more than 64K on an MS-DOS machine. =item '%c' allowed only after types %s in %s (F) The modifiers '!', '<' and '>' are allowed in pack() or unpack() only after certain types. See L<perlfunc/pack>. =item alpha->numify() is lossy (W numeric) An alpha version can not be numified without losing information. =item Ambiguous call resolved as CORE::%s(), qualify as such or use & (W ambiguous) A subroutine you have declared has the same name as a Perl keyword, and you have used the name without qualification for calling one or the other. Perl decided to call the builtin because the subroutine is not imported. To force interpretation as a subroutine call, either put an ampersand before the subroutine name, or qualify the name with its package. Alternatively, you can import the subroutine (or pretend that it's imported with the C<use subs> pragma). To silently interpret it as the Perl operator, use the C<CORE::> prefix on the operator (e.g. C<CORE::log($x)>) or declare the subroutine to be an object method (see L<perlsub/"Subroutine Attributes"> or L<attributes>). =item Ambiguous range in transliteration operator (F) You wrote something like C<tr/a-z-0//> which doesn't mean anything at all. To include a C<-> character in a transliteration, put it either first or last. (In the past, C<tr/a-z-0//> was synonymous with C<tr/a-y//>, which was probably not what you would have expected.) =item Ambiguous use of %s resolved as %s (S ambiguous) You said something that may not be interpreted the way you thought. Normally it's pretty easy to disambiguate it by supplying a missing quote, operator, parenthesis pair or declaration. =item Ambiguous use of -%s resolved as -&%s() (S ambiguous) You wrote something like C<-foo>, which might be the string C<"-foo">, or a call to the function C<foo>, negated. If you meant the string, just write C<"-foo">. If you meant the function call, write C<-foo()>. =item Ambiguous use of %c resolved as operator %c (S ambiguous) C<%>, C<&>, and C<*> are both infix operators (modulus, bitwise and, and multiplication) I<and> initial special characters (denoting hashes, subroutines and typeglobs), and you said something like C<*foo * foo> that might be interpreted as either of them. We assumed you meant the infix operator, but please try to make it more clear -- in the example given, you might write C<*foo * foo()> if you really meant to multiply a glob by the result of calling a function. =item Ambiguous use of %c{%s} resolved to %c%s (W ambiguous) You wrote something like C<@{foo}>, which might be asking for the variable C<@foo>, or it might be calling a function named foo, and dereferencing it as an array reference. If you wanted the variable, you can just write C<@foo>. If you wanted to call the function, write C<@{foo()}> ... or you could just not have a variable and a function with the same name, and save yourself a lot of trouble. =item Ambiguous use of %c{%s[...]} resolved to %c%s[...] =item Ambiguous use of %c{%s{...}} resolved to %c%s{...} (W ambiguous) You wrote something like C<${foo[2]}> (where foo represents the name of a Perl keyword), which might be looking for element number 2 of the array named C<@foo>, in which case please write C<$foo[2]>, or you might have meant to pass an anonymous arrayref to the function named foo, and then do a scalar deref on the value it returns. If you meant that, write C<${foo([2])}>. In regular expressions, the C<${foo[2]}> syntax is sometimes necessary to disambiguate between array subscripts and character classes. C</$length[2345]/>, for instance, will be interpreted as C<$length> followed by the character class C<[2345]>. If an array subscript is what you want, you can avoid the warning by changing C</${length[2345]}/> to the unsightly C</${\$length[2345]}/>, by renaming your array to something that does not coincide with a built-in keyword, or by simply turning off warnings with C<no warnings 'ambiguous';>. =item '|' and '<' may not both be specified on command line (F) An error peculiar to VMS. Perl does its own command line redirection, and found that STDIN was a pipe, and that you also tried to redirect STDIN using '<'. Only one STDIN stream to a customer, please. =item '|' and '>' may not both be specified on command line (F) An error peculiar to VMS. Perl does its own command line redirection, and thinks you tried to redirect stdout both to a file and into a pipe to another command. You need to choose one or the other, though nothing's stopping you from piping into a program or Perl script which 'splits' output into two streams, such as open(OUT,">$ARGV[0]") or die "Can't write to $ARGV[0]: $!"; while (<STDIN>) { print; print OUT; } close OUT; =item Applying %s to %s will act on scalar(%s) (W misc) The pattern match (C<//>), substitution (C<s///>), and transliteration (C<tr///>) operators work on scalar values. If you apply one of them to an array or a hash, it will convert the array or hash to a scalar value (the length of an array, or the population info of a hash) and then work on that scalar value. This is probably not what you meant to do. See L<perlfunc/grep> and L<perlfunc/map> for alternatives. =item Arg too short for msgsnd (F) msgsnd() requires a string at least as long as sizeof(long). =item Argument "%s" isn't numeric%s (W numeric) The indicated string was fed as an argument to an operator that expected a numeric value instead. If you're fortunate the message will identify which operator was so unfortunate. Note that for the C<Inf> and C<NaN> (infinity and not-a-number) the definition of "numeric" is somewhat unusual: the strings themselves (like "Inf") are considered numeric, and anything following them is considered non-numeric. =item Argument list not closed for PerlIO layer "%s" (W layer) When pushing a layer with arguments onto the Perl I/O system you forgot the ) that closes the argument list. (Layers take care of transforming data between external and internal representations.) Perl stopped parsing the layer list at this point and did not attempt to push this layer. If your program didn't explicitly request the failing operation, it may be the result of the value of the environment variable PERLIO. =item Argument "%s" treated as 0 in increment (++) (W numeric) The indicated string was fed as an argument to the C<++> operator which expects either a number or a string matching C</^[a-zA-Z]*[0-9]*\z/>. See L<perlop/Auto-increment and Auto-decrement> for details. =item Array passed to stat will be coerced to a scalar%s (W syntax) You called stat() on an array, but the array will be coerced to a scalar - the number of elements in the array. =item A signature parameter must start with '$', '@' or '%' (F) Each subroutine signature parameter declaration must start with a valid sigil; for example: sub foo ($a, $, $b = 1, @c) {} =item A slurpy parameter may not have a default value (F) Only scalar subroutine signature parameters may have a default value; for example: sub foo ($a = 1) {} # legal sub foo (@a = (1)) {} # invalid sub foo (%a = (a => b)) {} # invalid =item assertion botched: %s (X) The malloc package that comes with Perl had an internal failure. =item Assertion %s failed: file "%s", line %d (X) A general assertion failed. The file in question must be examined. =item Assigned value is not a reference (F) You tried to assign something that was not a reference to an lvalue reference (e.g., C<\$x = $y>). If you meant to make $x an alias to $y, use C<\$x = \$y>. =item Assigned value is not %s reference (F) You tried to assign a reference to a reference constructor, but the two references were not of the same type. You cannot alias a scalar to an array, or an array to a hash; the two types must match. \$x = \@y; # error \@x = \%y; # error $y = []; \$x = $y; # error; did you mean \$y? =item Assigning non-zero to $[ is no longer possible (F) When the "array_base" feature is disabled (e.g., and under C<use v5.16;>, and as of Perl 5.30) the special variable C<$[>, which is deprecated, is now a fixed zero value. =item Assignment to both a list and a scalar (F) If you assign to a conditional operator, the 2nd and 3rd arguments must either both be scalars or both be lists. Otherwise Perl won't know which context to supply to the right side. =item Assuming NOT a POSIX class since %s in regex; marked by S<<-- HERE> in m/%s/ (W regexp) You had something like these: [[:alnum]] [[:digit:xyz] They look like they might have been meant to be the POSIX classes C<[:alnum:]> or C<[:digit:]>. If so, they should be written: [[:alnum:]] [[:digit:]xyz] Since these aren't legal POSIX class specifications, but are legal bracketed character classes, Perl treats them as the latter. In the first example, it matches the characters C<":">, C<"[">, C<"a">, C<"l">, C<"m">, C<"n">, and C<"u">. If these weren't meant to be POSIX classes, this warning message is spurious, and can be suppressed by reordering things, such as [[al:num]] or [[:munla]] =item <> at require-statement should be quotes (F) You wrote C<< require <file> >> when you should have written C<require 'file'>. =item Attempt to access disallowed key '%s' in a restricted hash (F) The failing code has attempted to get or set a key which is not in the current set of allowed keys of a restricted hash. =item Attempt to bless into a freed package (F) You wrote C<bless $foo> with one argument after somehow causing the current package to be freed. Perl cannot figure out what to do, so it throws up its hands in despair. =item Attempt to bless into a reference (F) The CLASSNAME argument to the bless() operator is expected to be the name of the package to bless the resulting object into. You've supplied instead a reference to something: perhaps you wrote bless $self, $proto; when you intended bless $self, ref($proto) || $proto; If you actually want to bless into the stringified version of the reference supplied, you need to stringify it yourself, for example by: bless $self, "$proto"; =item Attempt to clear deleted array (S debugging) An array was assigned to when it was being freed. Freed values are not supposed to be visible to Perl code. This can also happen if XS code calls C<av_clear> from a custom magic callback on the array. =item Attempt to delete disallowed key '%s' from a restricted hash (F) The failing code attempted to delete from a restricted hash a key which is not in its key set. =item Attempt to delete readonly key '%s' from a restricted hash (F) The failing code attempted to delete a key whose value has been declared readonly from a restricted hash. =item Attempt to free non-arena SV: 0x%x (S internal) All SV objects are supposed to be allocated from arenas that will be garbage collected on exit. An SV was discovered to be outside any of those arenas. =item Attempt to free nonexistent shared string '%s'%s (S internal) Perl maintains a reference-counted internal table of strings to optimize the storage and access of hash keys and other strings. This indicates someone tried to decrement the reference count of a string that can no longer be found in the table. =item Attempt to free temp prematurely: SV 0x%x (S debugging) Mortalized values are supposed to be freed by the free_tmps() routine. This indicates that something else is freeing the SV before the free_tmps() routine gets a chance, which means that the free_tmps() routine will be freeing an unreferenced scalar when it does try to free it. =item Attempt to free unreferenced glob pointers (S internal) The reference counts got screwed up on symbol aliases. =item Attempt to free unreferenced scalar: SV 0x%x (S internal) Perl went to decrement the reference count of a scalar to see if it would go to 0, and discovered that it had already gone to 0 earlier, and should have been freed, and in fact, probably was freed. This could indicate that SvREFCNT_dec() was called too many times, or that SvREFCNT_inc() was called too few times, or that the SV was mortalized when it shouldn't have been, or that memory has been corrupted. =item Attempt to pack pointer to temporary value (W pack) You tried to pass a temporary value (like the result of a function, or a computed expression) to the "p" pack() template. This means the result contains a pointer to a location that could become invalid anytime, even before the end of the current statement. Use literals or global values as arguments to the "p" pack() template to avoid this warning. =item Attempt to reload %s aborted. (F) You tried to load a file with C<use> or C<require> that failed to compile once already. Perl will not try to compile this file again unless you delete its entry from %INC. See L<perlfunc/require> and L<perlvar/%INC>. =item Attempt to set length of freed array (W misc) You tried to set the length of an array which has been freed. You can do this by storing a reference to the scalar representing the last index of an array and later assigning through that reference. For example $r = do {my @a; \$#a}; $$r = 503 =item Attempt to use reference as lvalue in substr (W substr) You supplied a reference as the first argument to substr() used as an lvalue, which is pretty strange. Perhaps you forgot to dereference it first. See L<perlfunc/substr>. =item Attribute prototype(%s) discards earlier prototype attribute in same sub (W misc) A sub was declared as sub foo : prototype(A) : prototype(B) {}, for example. Since each sub can only have one prototype, the earlier declaration(s) are discarded while the last one is applied. =item av_reify called on tied array (S debugging) This indicates that something went wrong and Perl got I<very> confused about C<@_> or C<@DB::args> being tied. =item Bad arg length for %s, is %u, should be %d (F) You passed a buffer of the wrong size to one of msgctl(), semctl() or shmctl(). In C parlance, the correct sizes are, respectively, S<sizeof(struct msqid_ds *)>, S<sizeof(struct semid_ds *)>, and S<sizeof(struct shmid_ds *)>. =item Bad evalled substitution pattern (F) You've used the C</e> switch to evaluate the replacement for a substitution, but perl found a syntax error in the code to evaluate, most likely an unexpected right brace '}'. =item Bad filehandle: %s (F) A symbol was passed to something wanting a filehandle, but the symbol has no filehandle associated with it. Perhaps you didn't do an open(), or did it in another package. =item Bad free() ignored (S malloc) An internal routine called free() on something that had never been malloc()ed in the first place. Mandatory, but can be disabled by setting environment variable C<PERL_BADFREE> to 0. This message can be seen quite often with DB_File on systems with "hard" dynamic linking, like C<AIX> and C<OS/2>. It is a bug of C<Berkeley DB> which is left unnoticed if C<DB> uses I<forgiving> system malloc(). =item Bad hash (P) One of the internal hash routines was passed a null HV pointer. =item Badly placed ()'s (A) You've accidentally run your script through B<csh> instead of Perl. Check the #! line, or manually feed your script into Perl yourself. =item Bad name after %s (F) You started to name a symbol by using a package prefix, and then didn't finish the symbol. In particular, you can't interpolate outside of quotes, so $var = 'myvar'; $sym = mypack::$var; is not the same as $var = 'myvar'; $sym = "mypack::$var"; =item Bad plugin affecting keyword '%s' (F) An extension using the keyword plugin mechanism violated the plugin API. =item Bad realloc() ignored (S malloc) An internal routine called realloc() on something that had never been malloc()ed in the first place. Mandatory, but can be disabled by setting the environment variable C<PERL_BADFREE> to 1. =item Bad symbol for array (P) An internal request asked to add an array entry to something that wasn't a symbol table entry. =item Bad symbol for dirhandle (P) An internal request asked to add a dirhandle entry to something that wasn't a symbol table entry. =item Bad symbol for filehandle (P) An internal request asked to add a filehandle entry to something that wasn't a symbol table entry. =item Bad symbol for hash (P) An internal request asked to add a hash entry to something that wasn't a symbol table entry. =item Bad symbol for scalar (P) An internal request asked to add a scalar entry to something that wasn't a symbol table entry. =item Bareword found in conditional (W bareword) The compiler found a bareword where it expected a conditional, which often indicates that an || or && was parsed as part of the last argument of the previous construct, for example: open FOO || die; It may also indicate a misspelled constant that has been interpreted as a bareword: use constant TYPO => 1; if (TYOP) { print "foo" } The C<strict> pragma is useful in avoiding such errors. =item Bareword in require contains "%s" =item Bareword in require maps to disallowed filename "%s" =item Bareword in require maps to empty filename (F) The bareword form of require has been invoked with a filename which could not have been generated by a valid bareword permitted by the parser. You shouldn't be able to get this error from Perl code, but XS code may throw it if it passes an invalid module name to C<Perl_load_module>. =item Bareword in require must not start with a double-colon: "%s" (F) In C<require Bare::Word>, the bareword is not allowed to start with a double-colon. Write C<require ::Foo::Bar> as C<require Foo::Bar> instead. =item Bareword "%s" not allowed while "strict subs" in use (F) With "strict subs" in use, a bareword is only allowed as a subroutine identifier, in curly brackets or to the left of the "=>" symbol. Perhaps you need to predeclare a subroutine? =item Bareword "%s" refers to nonexistent package (W bareword) You used a qualified bareword of the form C<Foo::>, but the compiler saw no other uses of that namespace before that point. Perhaps you need to predeclare a package? =item BEGIN failed--compilation aborted (F) An untrapped exception was raised while executing a BEGIN subroutine. Compilation stops immediately and the interpreter is exited. =item BEGIN not safe after errors--compilation aborted (F) Perl found a C<BEGIN {}> subroutine (or a C<use> directive, which implies a C<BEGIN {}>) after one or more compilation errors had already occurred. Since the intended environment for the C<BEGIN {}> could not be guaranteed (due to the errors), and since subsequent code likely depends on its correct operation, Perl just gave up. =item \%d better written as $%d (W syntax) Outside of patterns, backreferences live on as variables. The use of backslashes is grandfathered on the right-hand side of a substitution, but stylistically it's better to use the variable form because other Perl programmers will expect it, and it works better if there are more than 9 backreferences. =item Binary number > 0b11111111111111111111111111111111 non-portable (W portable) The binary number you specified is larger than 2**32-1 (4294967295) and therefore non-portable between systems. See L<perlport> for more on portability concerns. =item bind() on closed socket %s (W closed) You tried to do a bind on a closed socket. Did you forget to check the return value of your socket() call? See L<perlfunc/bind>. =item binmode() on closed filehandle %s (W unopened) You tried binmode() on a filehandle that was never opened. Check your control flow and number of arguments. =item Bit vector size > 32 non-portable (W portable) Using bit vector sizes larger than 32 is non-portable. =item Bizarre copy of %s (P) Perl detected an attempt to copy an internal value that is not copiable. =item Bizarre SvTYPE [%d] (P) When starting a new thread or returning values from a thread, Perl encountered an invalid data type. =item Both or neither range ends should be Unicode in regex; marked by S<<-- HERE> in m/%s/ (W regexp) (only under C<S<use re 'strict'>> or within C<(?[...])>) In a bracketed character class in a regular expression pattern, you had a range which has exactly one end of it specified using C<\N{}>, and the other end is specified using a non-portable mechanism. Perl treats the range as a Unicode range, that is, all the characters in it are considered to be the Unicode characters, and which may be different code points on some platforms Perl runs on. For example, C<[\N{U+06}-\x08]> is treated as if you had instead said C<[\N{U+06}-\N{U+08}]>, that is it matches the characters whose code points in Unicode are 6, 7, and 8. But that C<\x08> might indicate that you meant something different, so the warning gets raised. =item Buffer overflow in prime_env_iter: %s (W internal) A warning peculiar to VMS. While Perl was preparing to iterate over %ENV, it encountered a logical name or symbol definition which was too long, so it was truncated to the string shown. =item Callback called exit (F) A subroutine invoked from an external package via call_sv() exited by calling exit. =item %s() called too early to check prototype (W prototype) You've called a function that has a prototype before the parser saw a definition or declaration for it, and Perl could not check that the call conforms to the prototype. You need to either add an early prototype declaration for the subroutine in question, or move the subroutine definition ahead of the call to get proper prototype checking. Alternatively, if you are certain that you're calling the function correctly, you may put an ampersand before the name to avoid the warning. See L<perlsub>. =item Cannot chr %f (F) You passed an invalid number (like an infinity or not-a-number) to C<chr>. =item Cannot complete in-place edit of %s: %s (F) Your perl script appears to have changed directory while performing an in-place edit of a file specified by a relative path, and your system doesn't include the directory relative POSIX functions needed to handle that. =item Cannot compress %f in pack (F) You tried compressing an infinity or not-a-number as an unsigned integer with BER, which makes no sense. =item Cannot compress integer in pack (F) An argument to pack("w",...) was too large to compress. The BER compressed integer format can only be used with positive integers, and you attempted to compress a very large number (> 1e308). See L<perlfunc/pack>. =item Cannot compress negative numbers in pack (F) An argument to pack("w",...) was negative. The BER compressed integer format can only be used with positive integers. See L<perlfunc/pack>. =item Cannot convert a reference to %s to typeglob (F) You manipulated Perl's symbol table directly, stored a reference in it, then tried to access that symbol via conventional Perl syntax. The access triggers Perl to autovivify that typeglob, but it there is no legal conversion from that type of reference to a typeglob. =item Cannot copy to %s (P) Perl detected an attempt to copy a value to an internal type that cannot be directly assigned to. =item Cannot find encoding "%s" (S io) You tried to apply an encoding that did not exist to a filehandle, either with open() or binmode(). =item Cannot open %s as a dirhandle: it is already open as a filehandle (F) You tried to use opendir() to associate a dirhandle to a symbol (glob or scalar) that already holds a filehandle. Since this idiom might render your code confusing, it was deprecated in Perl 5.10. As of Perl 5.28, it is a fatal error. =item Cannot open %s as a filehandle: it is already open as a dirhandle (F) You tried to use open() to associate a filehandle to a symbol (glob or scalar) that already holds a dirhandle. Since this idiom might render your code confusing, it was deprecated in Perl 5.10. As of Perl 5.28, it is a fatal error. =item Cannot pack %f with '%c' (F) You tried converting an infinity or not-a-number to an integer, which makes no sense. =item Cannot printf %f with '%c' (F) You tried printing an infinity or not-a-number as a character (%c), which makes no sense. Maybe you meant '%s', or just stringifying it? =item Cannot set tied @DB::args (F) C<caller> tried to set C<@DB::args>, but found it tied. Tying C<@DB::args> is not supported. (Before this error was added, it used to crash.) =item Cannot tie unreifiable array (P) You somehow managed to call C<tie> on an array that does not keep a reference count on its arguments and cannot be made to do so. Such arrays are not even supposed to be accessible to Perl code, but are only used internally. =item Cannot yet reorder sv_vcatpvfn() arguments from va_list (F) Some XS code tried to use C<sv_vcatpvfn()> or a related function with a format string that specifies explicit indexes for some of the elements, and using a C-style variable-argument list (a C<va_list>). This is not currently supported. XS authors wanting to do this must instead construct a C array of C<SV*> scalars containing the arguments. =item Can only compress unsigned integers in pack (F) An argument to pack("w",...) was not an integer. The BER compressed integer format can only be used with positive integers, and you attempted to compress something else. See L<perlfunc/pack>. =item Can't bless non-reference value (F) Only hard references may be blessed. This is how Perl "enforces" encapsulation of objects. See L<perlobj>. =item Can't "break" in a loop topicalizer (F) You called C<break>, but you're in a C<foreach> block rather than a C<given> block. You probably meant to use C<next> or C<last>. =item Can't "break" outside a given block (F) You called C<break>, but you're not inside a C<given> block. =item Can't call method "%s" on an undefined value (F) You used the syntax of a method call, but the slot filled by the object reference or package name contains an undefined value. Something like this will reproduce the error: $BADREF = undef; process $BADREF 1,2,3; $BADREF->process(1,2,3); =item Can't call method "%s" on unblessed reference (F) A method call must know in what package it's supposed to run. It ordinarily finds this out from the object reference you supply, but you didn't supply an object reference in this case. A reference isn't an object reference until it has been blessed. See L<perlobj>. =item Can't call method "%s" without a package or object reference (F) You used the syntax of a method call, but the slot filled by the object reference or package name contains an expression that returns a defined value which is neither an object reference nor a package name. Something like this will reproduce the error: $BADREF = 42; process $BADREF 1,2,3; $BADREF->process(1,2,3); =item Can't call mro_isa_changed_in() on anonymous symbol table (P) Perl got confused as to whether a hash was a plain hash or a symbol table hash when trying to update @ISA caches. =item Can't call mro_method_changed_in() on anonymous symbol table (F) An XS module tried to call C<mro_method_changed_in> on a hash that was not attached to the symbol table. =item Can't chdir to %s (F) You called C<perl -x/foo/bar>, but F</foo/bar> is not a directory that you can chdir to, possibly because it doesn't exist. =item Can't check filesystem of script "%s" for nosuid (P) For some reason you can't check the filesystem of the script for nosuid. =item Can't coerce %s to %s in %s (F) Certain types of SVs, in particular real symbol table entries (typeglobs), can't be forced to stop being what they are. So you can't say things like: *foo += 1; You CAN say $foo = *foo; $foo += 1; but then $foo no longer contains a glob. =item Can't "continue" outside a when block (F) You called C<continue>, but you're not inside a C<when> or C<default> block. =item Can't create pipe mailbox (P) An error peculiar to VMS. The process is suffering from exhausted quotas or other plumbing problems. =item Can't declare %s in "%s" (F) Only scalar, array, and hash variables may be declared as "my", "our" or "state" variables. They must have ordinary identifiers as names. =item Can't "default" outside a topicalizer (F) You have used a C<default> block that is neither inside a C<foreach> loop nor a C<given> block. (Note that this error is issued on exit from the C<default> block, so you won't get the error if you use an explicit C<continue>.) =item Can't determine class of operator %s, assuming BASEOP (S) This warning indicates something wrong in the internals of perl. Perl was trying to find the class (e.g. LISTOP) of a particular OP, and was unable to do so. This is likely to be due to a bug in the perl internals, or due to a bug in XS code which manipulates perl optrees. =item Can't do inplace edit: %s is not a regular file (S inplace) You tried to use the B<-i> switch on a special file, such as a file in /dev, a FIFO or an uneditable directory. The file was ignored. =item Can't do inplace edit on %s: %s (S inplace) The creation of the new file failed for the indicated reason. =item Can't do inplace edit: %s would not be unique (S inplace) Your filesystem does not support filenames longer than 14 characters and Perl was unable to create a unique filename during inplace editing with the B<-i> switch. The file was ignored. =item Can't do %s("%s") on non-UTF-8 locale; resolved to "%s". (W locale) You are 1) running under "C<use locale>"; 2) the current locale is not a UTF-8 one; 3) you tried to do the designated case-change operation on the specified Unicode character; and 4) the result of this operation would mix Unicode and locale rules, which likely conflict. Mixing of different rule types is forbidden, so the operation was not done; instead the result is the indicated value, which is the best available that uses entirely Unicode rules. That turns out to almost always be the original character, unchanged. It is generally a bad idea to mix non-UTF-8 locales and Unicode, and this issue is one of the reasons why. This warning is raised when Unicode rules would normally cause the result of this operation to contain a character that is in the range specified by the locale, 0..255, and hence is subject to the locale's rules, not Unicode's. If you are using locale purely for its characteristics related to things like its numeric and time formatting (and not C<LC_CTYPE>), consider using a restricted form of the locale pragma (see L<perllocale/The "use locale" pragma>) like "S<C<use locale ':not_characters'>>". Note that failed case-changing operations done as a result of case-insensitive C</i> regular expression matching will show up in this warning as having the C<fc> operation (as that is what the regular expression engine calls behind the scenes.) =item Can't do waitpid with flags (F) This machine doesn't have either waitpid() or wait4(), so only waitpid() without flags is emulated. =item Can't emulate -%s on #! line (F) The #! line specifies a switch that doesn't make sense at this point. For example, it'd be kind of silly to put a B<-x> on the #! line. =item Can't %s %s-endian %ss on this platform (F) Your platform's byte-order is neither big-endian nor little-endian, or it has a very strange pointer size. Packing and unpacking big- or little-endian floating point values and pointers may not be possible. See L<perlfunc/pack>. =item Can't exec "%s": %s (W exec) A system(), exec(), or piped open call could not execute the named program for the indicated reason. Typical reasons include: the permissions were wrong on the file, the file wasn't found in C<$ENV{PATH}>, the executable in question was compiled for another architecture, or the #! line in a script points to an interpreter that can't be run for similar reasons. (Or maybe your system doesn't support #! at all.) =item Can't exec %s (F) Perl was trying to execute the indicated program for you because that's what the #! line said. If that's not what you wanted, you may need to mention "perl" on the #! line somewhere. =item Can't execute %s (F) You used the B<-S> switch, but the copies of the script to execute found in the PATH did not have correct permissions. =item Can't find an opnumber for "%s" (F) A string of a form C<CORE::word> was given to prototype(), but there is no builtin with the name C<word>. =item Can't find label %s (F) You said to goto a label that isn't mentioned anywhere that it's possible for us to go to. See L<perlfunc/goto>. =item Can't find %s on PATH (F) You used the B<-S> switch, but the script to execute could not be found in the PATH. =item Can't find %s on PATH, '.' not in PATH (F) You used the B<-S> switch, but the script to execute could not be found in the PATH, or at least not with the correct permissions. The script exists in the current directory, but PATH prohibits running it. =item Can't find string terminator %s anywhere before EOF (F) Perl strings can stretch over multiple lines. This message means that the closing delimiter was omitted. Because bracketed quotes count nesting levels, the following is missing its final parenthesis: print q(The character '(' starts a side comment.); If you're getting this error from a here-document, you may have included unseen whitespace before or after your closing tag or there may not be a linebreak after it. A good programmer's editor will have a way to help you find these characters (or lack of characters). See L<perlop> for the full details on here-documents. =item Can't find Unicode property definition "%s" =item Can't find Unicode property definition "%s" in regex; marked by <-- HERE in m/%s/ (F) The named property which you specified via C<\p> or C<\P> is not one known to Perl. Perhaps you misspelled the name? See L<perluniprops/Properties accessible through \p{} and \P{}> for a complete list of available official properties. If it is a L<user-defined property|perlunicode/User-Defined Character Properties> it must have been defined by the time the regular expression is matched. If you didn't mean to use a Unicode property, escape the C<\p>, either by C<\\p> (just the C<\p>) or by C<\Q\p> (the rest of the string, or until C<\E>). =item Can't fork: %s (F) A fatal error occurred while trying to fork while opening a pipeline. =item Can't fork, trying again in 5 seconds (W pipe) A fork in a piped open failed with EAGAIN and will be retried after five seconds. =item Can't get filespec - stale stat buffer? (S) A warning peculiar to VMS. This arises because of the difference between access checks under VMS and under the Unix model Perl assumes. Under VMS, access checks are done by filename, rather than by bits in the stat buffer, so that ACLs and other protections can be taken into account. Unfortunately, Perl assumes that the stat buffer contains all the necessary information, and passes it, instead of the filespec, to the access-checking routine. It will try to retrieve the filespec using the device name and FID present in the stat buffer, but this works only if you haven't made a subsequent call to the CRTL stat() routine, because the device name is overwritten with each call. If this warning appears, the name lookup failed, and the access-checking routine gave up and returned FALSE, just to be conservative. (Note: The access-checking routine knows about the Perl C<stat> operator and file tests, so you shouldn't ever see this warning in response to a Perl command; it arises only if some internal code takes stat buffers lightly.) =item Can't get pipe mailbox device name (P) An error peculiar to VMS. After creating a mailbox to act as a pipe, Perl can't retrieve its name for later use. =item Can't get SYSGEN parameter value for MAXBUF (P) An error peculiar to VMS. Perl asked $GETSYI how big you want your mailbox buffers to be, and didn't get an answer. =item Can't "goto" into a binary or list expression (F) A "goto" statement was executed to jump into the middle of a binary or list expression. You can't get there from here. The reason for this restriction is that the interpreter would get confused as to how many arguments there are, resulting in stack corruption or crashes. This error occurs in cases such as these: goto F; print do { F: }; # Can't jump into the arguments to print goto G; $x + do { G: $y }; # How is + supposed to get its first operand? =item Can't "goto" into a "given" block (F) A "goto" statement was executed to jump into the middle of a C<given> block. You can't get there from here. See L<perlfunc/goto>. =item Can't "goto" into the middle of a foreach loop (F) A "goto" statement was executed to jump into the middle of a foreach loop. You can't get there from here. See L<perlfunc/goto>. =item Can't "goto" out of a pseudo block (F) A "goto" statement was executed to jump out of what might look like a block, except that it isn't a proper block. This usually occurs if you tried to jump out of a sort() block or subroutine, which is a no-no. See L<perlfunc/goto>. =item Can't goto subroutine from an eval-%s (F) The "goto subroutine" call can't be used to jump out of an eval "string" or block. =item Can't goto subroutine from a sort sub (or similar callback) (F) The "goto subroutine" call can't be used to jump out of the comparison sub for a sort(), or from a similar callback (such as the reduce() function in List::Util). =item Can't goto subroutine outside a subroutine (F) The deeply magical "goto subroutine" call can only replace one subroutine call for another. It can't manufacture one out of whole cloth. In general you should be calling it out of only an AUTOLOAD routine anyway. See L<perlfunc/goto>. =item Can't ignore signal CHLD, forcing to default (W signal) Perl has detected that it is being run with the SIGCHLD signal (sometimes known as SIGCLD) disabled. Since disabling this signal will interfere with proper determination of exit status of child processes, Perl has reset the signal to its default value. This situation typically indicates that the parent program under which Perl may be running (e.g. cron) is being very careless. =item Can't kill a non-numeric process ID (F) Process identifiers must be (signed) integers. It is a fatal error to attempt to kill() an undefined, empty-string or otherwise non-numeric process identifier. =item Can't "last" outside a loop block (F) A "last" statement was executed to break out of the current block, except that there's this itty bitty problem called there isn't a current block. Note that an "if" or "else" block doesn't count as a "loopish" block, as doesn't a block given to sort(), map() or grep(). You can usually double the curlies to get the same effect though, because the inner curlies will be considered a block that loops once. See L<perlfunc/last>. =item Can't linearize anonymous symbol table (F) Perl tried to calculate the method resolution order (MRO) of a package, but failed because the package stash has no name. =item Can't load '%s' for module %s (F) The module you tried to load failed to load a dynamic extension. This may either mean that you upgraded your version of perl to one that is incompatible with your old dynamic extensions (which is known to happen between major versions of perl), or (more likely) that your dynamic extension was built against an older version of the library that is installed on your system. You may need to rebuild your old dynamic extensions. =item Can't localize lexical variable %s (F) You used local on a variable name that was previously declared as a lexical variable using "my" or "state". This is not allowed. If you want to localize a package variable of the same name, qualify it with the package name. =item Can't localize through a reference (F) You said something like C<local $$ref>, which Perl can't currently handle, because when it goes to restore the old value of whatever $ref pointed to after the scope of the local() is finished, it can't be sure that $ref will still be a reference. =item Can't locate %s (F) You said to C<do> (or C<require>, or C<use>) a file that couldn't be found. Perl looks for the file in all the locations mentioned in @INC, unless the file name included the full path to the file. Perhaps you need to set the PERL5LIB or PERL5OPT environment variable to say where the extra library is, or maybe the script needs to add the library name to @INC. Or maybe you just misspelled the name of the file. See L<perlfunc/require> and L<lib>. =item Can't locate auto/%s.al in @INC (F) A function (or method) was called in a package which allows autoload, but there is no function to autoload. Most probable causes are a misprint in a function/method name or a failure to C<AutoSplit> the file, say, by doing C<make install>. =item Can't locate loadable object for module %s in @INC (F) The module you loaded is trying to load an external library, like for example, F<foo.so> or F<bar.dll>, but the L<DynaLoader> module was unable to locate this library. See L<DynaLoader>. =item Can't locate object method "%s" via package "%s" (F) You called a method correctly, and it correctly indicated a package functioning as a class, but that package doesn't define that particular method, nor does any of its base classes. See L<perlobj>. =item Can't locate object method "%s" via package "%s" (perhaps you forgot to load "%s"?) (F) You called a method on a class that did not exist, and the method could not be found in UNIVERSAL. This often means that a method requires a package that has not been loaded. =item Can't locate package %s for @%s::ISA (W syntax) The @ISA array contained the name of another package that doesn't seem to exist. =item Can't locate PerlIO%s (F) You tried to use in open() a PerlIO layer that does not exist, e.g. open(FH, ">:nosuchlayer", "somefile"). =item Can't make list assignment to %ENV on this system (F) List assignment to %ENV is not supported on some systems, notably VMS. =item Can't make loaded symbols global on this platform while loading %s (S) A module passed the flag 0x01 to DynaLoader::dl_load_file() to request that symbols from the stated file are made available globally within the process, but that functionality is not available on this platform. Whilst the module likely will still work, this may prevent the perl interpreter from loading other XS-based extensions which need to link directly to functions defined in the C or XS code in the stated file. =item Can't modify %s in %s (F) You aren't allowed to assign to the item indicated, or otherwise try to change it, such as with an auto-increment. =item Can't modify nonexistent substring (P) The internal routine that does assignment to a substr() was handed a NULL. =item Can't modify non-lvalue subroutine call of &%s =item Can't modify non-lvalue subroutine call of &%s in %s (F) Subroutines meant to be used in lvalue context should be declared as such. See L<perlsub/"Lvalue subroutines">. =item Can't modify reference to %s in %s assignment (F) Only a limited number of constructs can be used as the argument to a reference constructor on the left-hand side of an assignment, and what you used was not one of them. See L<perlref/Assigning to References>. =item Can't modify reference to localized parenthesized array in list assignment (F) Assigning to C<\local(@array)> or C<\(local @array)> is not supported, as it is not clear exactly what it should do. If you meant to make @array refer to some other array, use C<\@array = \@other_array>. If you want to make the elements of @array aliases of the scalars referenced on the right-hand side, use C<\(@array) = @scalar_refs>. =item Can't modify reference to parenthesized hash in list assignment (F) Assigning to C<\(%hash)> is not supported. If you meant to make %hash refer to some other hash, use C<\%hash = \%other_hash>. If you want to make the elements of %hash into aliases of the scalars referenced on the right-hand side, use a hash slice: C<\@hash{@keys} = @those_scalar_refs>. =item Can't msgrcv to read-only var (F) The target of a msgrcv must be modifiable to be used as a receive buffer. =item Can't "next" outside a loop block (F) A "next" statement was executed to reiterate the current block, but there isn't a current block. Note that an "if" or "else" block doesn't count as a "loopish" block, as doesn't a block given to sort(), map() or grep(). You can usually double the curlies to get the same effect though, because the inner curlies will be considered a block that loops once. See L<perlfunc/next>. =item Can't open %s: %s (S inplace) The implicit opening of a file through use of the C<< <> >> filehandle, either implicitly under the C<-n> or C<-p> command-line switches, or explicitly, failed for the indicated reason. Usually this is because you don't have read permission for a file which you named on the command line. (F) You tried to call perl with the B<-e> switch, but F</dev/null> (or your operating system's equivalent) could not be opened. =item Can't open a reference (W io) You tried to open a scalar reference for reading or writing, using the 3-arg open() syntax: open FH, '>', $ref; but your version of perl is compiled without perlio, and this form of open is not supported. =item Can't open bidirectional pipe (W pipe) You tried to say C<open(CMD, "|cmd|")>, which is not supported. You can try any of several modules in the Perl library to do this, such as IPC::Open2. Alternately, direct the pipe's output to a file using ">", and then read it in under a different file handle. =item Can't open error file %s as stderr (F) An error peculiar to VMS. Perl does its own command line redirection, and couldn't open the file specified after '2>' or '2>>' on the command line for writing. =item Can't open input file %s as stdin (F) An error peculiar to VMS. Perl does its own command line redirection, and couldn't open the file specified after '<' on the command line for reading. =item Can't open output file %s as stdout (F) An error peculiar to VMS. Perl does its own command line redirection, and couldn't open the file specified after '>' or '>>' on the command line for writing. =item Can't open output pipe (name: %s) (P) An error peculiar to VMS. Perl does its own command line redirection, and couldn't open the pipe into which to send data destined for stdout. =item Can't open perl script "%s": %s (F) The script you specified can't be opened for the indicated reason. If you're debugging a script that uses #!, and normally relies on the shell's $PATH search, the -S option causes perl to do that search, so you don't have to type the path or C<`which $scriptname`>. =item Can't read CRTL environ (S) A warning peculiar to VMS. Perl tried to read an element of %ENV from the CRTL's internal environment array and discovered the array was missing. You need to figure out where your CRTL misplaced its environ or define F<PERL_ENV_TABLES> (see L<perlvms>) so that environ is not searched. =item Can't redeclare "%s" in "%s" (F) A "my", "our" or "state" declaration was found within another declaration, such as C<my ($x, my($y), $z)> or C<our (my $x)>. =item Can't "redo" outside a loop block (F) A "redo" statement was executed to restart the current block, but there isn't a current block. Note that an "if" or "else" block doesn't count as a "loopish" block, as doesn't a block given to sort(), map() or grep(). You can usually double the curlies to get the same effect though, because the inner curlies will be considered a block that loops once. See L<perlfunc/redo>. =item Can't remove %s: %s, skipping file (S inplace) You requested an inplace edit without creating a backup file. Perl was unable to remove the original file to replace it with the modified file. The file was left unmodified. =item Can't rename in-place work file '%s' to '%s': %s (F) When closed implicitly, the temporary file for in-place editing couldn't be renamed to the original filename. =item Can't rename %s to %s: %s, skipping file (F) The rename done by the B<-i> switch failed for some reason, probably because you don't have write permission to the directory. =item Can't reopen input pipe (name: %s) in binary mode (P) An error peculiar to VMS. Perl thought stdin was a pipe, and tried to reopen it to accept binary data. Alas, it failed. =item Can't represent character for Ox%X on this platform (F) There is a hard limit to how big a character code point can be due to the fundamental properties of UTF-8, especially on EBCDIC platforms. The given code point exceeds that. The only work-around is to not use such a large code point. =item Can't reset %ENV on this system (F) You called C<reset('E')> or similar, which tried to reset all variables in the current package beginning with "E". In the main package, that includes %ENV. Resetting %ENV is not supported on some systems, notably VMS. =item Can't resolve method "%s" overloading "%s" in package "%s" (F)(P) Error resolving overloading specified by a method name (as opposed to a subroutine reference): no such method callable via the package. If the method name is C<???>, this is an internal error. =item Can't return %s from lvalue subroutine (F) Perl detected an attempt to return illegal lvalues (such as temporary or readonly values) from a subroutine used as an lvalue. This is not allowed. =item Can't return outside a subroutine (F) The return statement was executed in mainline code, that is, where there was no subroutine call to return out of. See L<perlsub>. =item Can't return %s to lvalue scalar context (F) You tried to return a complete array or hash from an lvalue subroutine, but you called the subroutine in a way that made Perl think you meant to return only one value. You probably meant to write parentheses around the call to the subroutine, which tell Perl that the call should be in list context. =item Can't stat script "%s" (P) For some reason you can't fstat() the script even though you have it open already. Bizarre. =item Can't take log of %g (F) For ordinary real numbers, you can't take the logarithm of a negative number or zero. There's a Math::Complex package that comes standard with Perl, though, if you really want to do that for the negative numbers. =item Can't take sqrt of %g (F) For ordinary real numbers, you can't take the square root of a negative number. There's a Math::Complex package that comes standard with Perl, though, if you really want to do that. =item Can't undef active subroutine (F) You can't undefine a routine that's currently running. You can, however, redefine it while it's running, and you can even undef the redefined subroutine while the old routine is running. Go figure. =item Can't unweaken a nonreference (F) You attempted to unweaken something that was not a reference. Only references can be unweakened. =item Can't upgrade %s (%d) to %d (P) The internal sv_upgrade routine adds "members" to an SV, making it into a more specialized kind of SV. The top several SV types are so specialized, however, that they cannot be interconverted. This message indicates that such a conversion was attempted. =item Can't use '%c' after -mname (F) You tried to call perl with the B<-m> switch, but you put something other than "=" after the module name. =item Can't use a hash as a reference (F) You tried to use a hash as a reference, as in C<< %foo->{"bar"} >> or C<< %$ref->{"hello"} >>. Versions of perl <= 5.22.0 used to allow this syntax, but shouldn't have. This was deprecated in perl 5.6.1. =item Can't use an array as a reference (F) You tried to use an array as a reference, as in C<< @foo->[23] >> or C<< @$ref->[99] >>. Versions of perl <= 5.22.0 used to allow this syntax, but shouldn't have. This was deprecated in perl 5.6.1. =item Can't use anonymous symbol table for method lookup (F) The internal routine that does method lookup was handed a symbol table that doesn't have a name. Symbol tables can become anonymous for example by undefining stashes: C<undef %Some::Package::>. =item Can't use an undefined value as %s reference (F) A value used as either a hard reference or a symbolic reference must be a defined value. This helps to delurk some insidious errors. =item Can't use bareword ("%s") as %s ref while "strict refs" in use (F) Only hard references are allowed by "strict refs". Symbolic references are disallowed. See L<perlref>. =item Can't use %! because Errno.pm is not available (F) The first time the C<%!> hash is used, perl automatically loads the Errno.pm module. The Errno module is expected to tie the %! hash to provide symbolic names for C<$!> errno values. =item Can't use both '<' and '>' after type '%c' in %s (F) A type cannot be forced to have both big-endian and little-endian byte-order at the same time, so this combination of modifiers is not allowed. See L<perlfunc/pack>. =item Can't use 'defined(@array)' (Maybe you should just omit the defined()?) (F) defined() is not useful on arrays because it checks for an undefined I<scalar> value. If you want to see if the array is empty, just use C<if (@array) { # not empty }> for example. =item Can't use 'defined(%hash)' (Maybe you should just omit the defined()?) (F) C<defined()> is not usually right on hashes. Although C<defined %hash> is false on a plain not-yet-used hash, it becomes true in several non-obvious circumstances, including iterators, weak references, stash names, even remaining true after C<undef %hash>. These things make C<defined %hash> fairly useless in practice, so it now generates a fatal error. If a check for non-empty is what you wanted then just put it in boolean context (see L<perldata/Scalar values>): if (%hash) { # not empty } If you had C<defined %Foo::Bar::QUUX> to check whether such a package variable exists then that's never really been reliable, and isn't a good way to enquire about the features of a package, or whether it's loaded, etc. =item Can't use %s for loop variable (P) The parser got confused when trying to parse a C<foreach> loop. =item Can't use global %s in %s (F) You tried to declare a magical variable as a lexical variable. This is not allowed, because the magic can be tied to only one location (namely the global variable) and it would be incredibly confusing to have variables in your program that looked like magical variables but weren't. =item Can't use '%c' in a group with different byte-order in %s (F) You attempted to force a different byte-order on a type that is already inside a group with a byte-order modifier. For example you cannot force little-endianness on a type that is inside a big-endian group. =item Can't use "my %s" in sort comparison (F) The global variables $a and $b are reserved for sort comparisons. You mentioned $a or $b in the same line as the <=> or cmp operator, and the variable had earlier been declared as a lexical variable. Either qualify the sort variable with the package name, or rename the lexical variable. =item Can't use %s ref as %s ref (F) You've mixed up your reference types. You have to dereference a reference of the type needed. You can use the ref() function to test the type of the reference, if need be. =item Can't use string ("%s") as %s ref while "strict refs" in use =item Can't use string ("%s"...) as %s ref while "strict refs" in use (F) You've told Perl to dereference a string, something which C<use strict> blocks to prevent it happening accidentally. See L<perlref/"Symbolic references">. This can be triggered by an C<@> or C<$> in a double-quoted string immediately before interpolating a variable, for example in C<"user @$twitter_id">, which says to treat the contents of C<$twitter_id> as an array reference; use a C<\> to have a literal C<@> symbol followed by the contents of C<$twitter_id>: C<"user \@$twitter_id">. =item Can't use subscript on %s (F) The compiler tried to interpret a bracketed expression as a subscript. But to the left of the brackets was an expression that didn't look like a hash or array reference, or anything else subscriptable. =item Can't use \%c to mean $%c in expression (W syntax) In an ordinary expression, backslash is a unary operator that creates a reference to its argument. The use of backslash to indicate a backreference to a matched substring is valid only as part of a regular expression pattern. Trying to do this in ordinary Perl code produces a value that prints out looking like SCALAR(0xdecaf). Use the $1 form instead. =item Can't weaken a nonreference (F) You attempted to weaken something that was not a reference. Only references can be weakened. =item Can't "when" outside a topicalizer (F) You have used a when() block that is neither inside a C<foreach> loop nor a C<given> block. (Note that this error is issued on exit from the C<when> block, so you won't get the error if the match fails, or if you use an explicit C<continue>.) =item Can't x= to read-only value (F) You tried to repeat a constant value (often the undefined value) with an assignment operator, which implies modifying the value itself. Perhaps you need to copy the value to a temporary, and repeat that. =item Character following "\c" must be printable ASCII (F) In C<\cI<X>>, I<X> must be a printable (non-control) ASCII character. Note that ASCII characters that don't map to control characters are discouraged, and will generate the warning (when enabled) L</""\c%c" is more clearly written simply as "%s"">. =item Character following \%c must be '{' or a single-character Unicode property name in regex; marked by <-- HERE in m/%s/ (F) (In the above the C<%c> is replaced by either C<p> or C<P>.) You specified something that isn't a legal Unicode property name. Most Unicode properties are specified by C<\p{...}>. But if the name is a single character one, the braces may be omitted. =item Character in 'C' format wrapped in pack (W pack) You said pack("C", $x) where $x is either less than 0 or more than 255; the C<"C"> format is only for encoding native operating system characters (ASCII, EBCDIC, and so on) and not for Unicode characters, so Perl behaved as if you meant pack("C", $x & 255) If you actually want to pack Unicode codepoints, use the C<"U"> format instead. =item Character in 'c' format wrapped in pack (W pack) You said pack("c", $x) where $x is either less than -128 or more than 127; the C<"c"> format is only for encoding native operating system characters (ASCII, EBCDIC, and so on) and not for Unicode characters, so Perl behaved as if you meant pack("c", $x & 255); If you actually want to pack Unicode codepoints, use the C<"U"> format instead. =item Character in '%c' format wrapped in unpack (W unpack) You tried something like unpack("H", "\x{2a1}") where the format expects to process a byte (a character with a value below 256), but a higher value was provided instead. Perl uses the value modulus 256 instead, as if you had provided: unpack("H", "\x{a1}") =item Character in 'W' format wrapped in pack (W pack) You said pack("U0W", $x) where $x is either less than 0 or more than 255. However, C<U0>-mode expects all values to fall in the interval [0, 255], so Perl behaved as if you meant: pack("U0W", $x & 255) =item Character(s) in '%c' format wrapped in pack (W pack) You tried something like pack("u", "\x{1f3}b") where the format expects to process a sequence of bytes (character with a value below 256), but some of the characters had a higher value. Perl uses the character values modulus 256 instead, as if you had provided: pack("u", "\x{f3}b") =item Character(s) in '%c' format wrapped in unpack (W unpack) You tried something like unpack("s", "\x{1f3}b") where the format expects to process a sequence of bytes (character with a value below 256), but some of the characters had a higher value. Perl uses the character values modulus 256 instead, as if you had provided: unpack("s", "\x{f3}b") =item charnames alias definitions may not contain a sequence of multiple spaces; marked by S<<-- HERE> in %s (F) You defined a character name which had multiple space characters in a row. Change them to single spaces. Usually these names are defined in the C<:alias> import argument to C<use charnames>, but they could be defined by a translator installed into C<$^H{charnames}>. See L<charnames/CUSTOM ALIASES>. =item charnames alias definitions may not contain trailing white-space; marked by S<<-- HERE> in %s (F) You defined a character name which ended in a space character. Remove the trailing space(s). Usually these names are defined in the C<:alias> import argument to C<use charnames>, but they could be defined by a translator installed into C<$^H{charnames}>. See L<charnames/CUSTOM ALIASES>. =item chdir() on unopened filehandle %s (W unopened) You tried chdir() on a filehandle that was never opened. =item "\c%c" is more clearly written simply as "%s" (W syntax) The C<\cI<X>> construct is intended to be a way to specify non-printable characters. You used it for a printable one, which is better written as simply itself, perhaps preceded by a backslash for non-word characters. Doing it the way you did is not portable between ASCII and EBCDIC platforms. =item Cloning substitution context is unimplemented (F) Creating a new thread inside the C<s///> operator is not supported. =item closedir() attempted on invalid dirhandle %s (W io) The dirhandle you tried to close is either closed or not really a dirhandle. Check your control flow. =item close() on unopened filehandle %s (W unopened) You tried to close a filehandle that was never opened. =item Closure prototype called (F) If a closure has attributes, the subroutine passed to an attribute handler is the prototype that is cloned when a new closure is created. This subroutine cannot be called. =item \C no longer supported in regex; marked by S<<-- HERE> in m/%s/ (F) The \C character class used to allow a match of single byte within a multi-byte utf-8 character, but was removed in v5.24 as it broke encapsulation and its implementation was extremely buggy. If you really need to process the individual bytes, you probably want to convert your string to one where each underlying byte is stored as a character, with utf8::encode(). =item Code missing after '/' (F) You had a (sub-)template that ends with a '/'. There must be another template code following the slash. See L<perlfunc/pack>. =item Code point 0x%X is not Unicode, and not portable (S non_unicode portable) You had a code point that has never been in any standard, so it is likely that languages other than Perl will NOT understand it. This code point also will not fit in a 32-bit word on ASCII platforms and therefore is non-portable between systems. At one time, it was legal in some standards to have code points up to 0x7FFF_FFFF, but not higher, and this code point is higher. Acceptance of these code points is a Perl extension, and you should expect that nothing other than Perl can handle them; Perl itself on EBCDIC platforms before v5.24 does not handle them. Perl also makes no guarantees that the representation of these code points won't change at some point in the future, say when machines become available that have larger than a 64-bit word. At that time, files containing any of these, written by an older Perl might require conversion before being readable by a newer Perl. =item Code point 0x%X is not Unicode, may not be portable (S non_unicode) You had a code point above the Unicode maximum of U+10FFFF. Perl allows strings to contain a superset of Unicode code points, but these may not be accepted by other languages/systems. Further, even if these languages/systems accept these large code points, they may have chosen a different representation for them than the UTF-8-like one that Perl has, which would mean files are not exchangeable between them and Perl. On EBCDIC platforms, code points above 0x3FFF_FFFF have a different representation in Perl v5.24 than before, so any file containing these that was written before that version will require conversion before being readable by a later Perl. =item %s: Command not found (A) You've accidentally run your script through B<csh> or another shell instead of Perl. Check the #! line, or manually feed your script into Perl yourself. The #! line at the top of your file could look like #!/usr/bin/perl =item %s: command not found (A) You've accidentally run your script through B<bash> or another shell instead of Perl. Check the #! line, or manually feed your script into Perl yourself. The #! line at the top of your file could look like #!/usr/bin/perl =item %s: command not found: %s (A) You've accidentally run your script through B<zsh> or another shell instead of Perl. Check the #! line, or manually feed your script into Perl yourself. The #! line at the top of your file could look like #!/usr/bin/perl =item Compilation failed in require (F) Perl could not compile a file specified in a C<require> statement. Perl uses this generic message when none of the errors that it encountered were severe enough to halt compilation immediately. =item Complex regular subexpression recursion limit (%d) exceeded (W regexp) The regular expression engine uses recursion in complex situations where back-tracking is required. Recursion depth is limited to 32766, or perhaps less in architectures where the stack cannot grow arbitrarily. ("Simple" and "medium" situations are handled without recursion and are not subject to a limit.) Try shortening the string under examination; looping in Perl code (e.g. with C<while>) rather than in the regular expression engine; or rewriting the regular expression so that it is simpler or backtracks less. (See L<perlfaq2> for information on I<Mastering Regular Expressions>.) =item connect() on closed socket %s (W closed) You tried to do a connect on a closed socket. Did you forget to check the return value of your socket() call? See L<perlfunc/connect>. =item Constant(%s): Call to &{$^H{%s}} did not return a defined value (F) The subroutine registered to handle constant overloading (see L<overload>) or a custom charnames handler (see L<charnames/CUSTOM TRANSLATORS>) returned an undefined value. =item Constant(%s): $^H{%s} is not defined (F) The parser found inconsistencies while attempting to define an overloaded constant. Perhaps you forgot to load the corresponding L<overload> pragma? =item Constant is not %s reference (F) A constant value (perhaps declared using the C<use constant> pragma) is being dereferenced, but it amounts to the wrong type of reference. The message indicates the type of reference that was expected. This usually indicates a syntax error in dereferencing the constant value. See L<perlsub/"Constant Functions"> and L<constant>. =item Constants from lexical variables potentially modified elsewhere are no longer permitted (F) You wrote something like my $var; $sub = sub () { $var }; but $var is referenced elsewhere and could be modified after the C<sub> expression is evaluated. Either it is explicitly modified elsewhere (C<$var = 3>) or it is passed to a subroutine or to an operator like C<printf> or C<map>, which may or may not modify the variable. Traditionally, Perl has captured the value of the variable at that point and turned the subroutine into a constant eligible for inlining. In those cases where the variable can be modified elsewhere, this breaks the behavior of closures, in which the subroutine captures the variable itself, rather than its value, so future changes to the variable are reflected in the subroutine's return value. This usage was deprecated, and as of Perl 5.32 is no longer allowed, making it possible to change the behavior in the future. If you intended for the subroutine to be eligible for inlining, then make sure the variable is not referenced elsewhere, possibly by copying it: my $var2 = $var; $sub = sub () { $var2 }; If you do want this subroutine to be a closure that reflects future changes to the variable that it closes over, add an explicit C<return>: my $var; $sub = sub () { return $var }; =item Constant subroutine %s redefined (W redefine)(S) You redefined a subroutine which had previously been eligible for inlining. See L<perlsub/"Constant Functions"> for commentary and workarounds. =item Constant subroutine %s undefined (W misc) You undefined a subroutine which had previously been eligible for inlining. See L<perlsub/"Constant Functions"> for commentary and workarounds. =item Constant(%s) unknown (F) The parser found inconsistencies either while attempting to define an overloaded constant, or when trying to find the character name specified in the C<\N{...}> escape. Perhaps you forgot to load the corresponding L<overload> pragma? =item :const is experimental (S experimental::const_attr) The "const" attribute is experimental. If you want to use the feature, disable the warning with C<no warnings 'experimental::const_attr'>, but know that in doing so you are taking the risk that your code may break in a future Perl version. =item :const is not permitted on named subroutines (F) The "const" attribute causes an anonymous subroutine to be run and its value captured at the time that it is cloned. Named subroutines are not cloned like this, so the attribute does not make sense on them. =item Copy method did not return a reference (F) The method which overloads "=" is buggy. See L<overload/Copy Constructor>. =item &CORE::%s cannot be called directly (F) You tried to call a subroutine in the C<CORE::> namespace with C<&foo> syntax or through a reference. Some subroutines in this package cannot yet be called that way, but must be called as barewords. Something like this will work: BEGIN { *shove = \&CORE::push; } shove @array, 1,2,3; # pushes on to @array =item CORE::%s is not a keyword (F) The CORE:: namespace is reserved for Perl keywords. =item Corrupted regexp opcode %d > %d (P) This is either an error in Perl, or, if you're using one, your L<custom regular expression engine|perlreapi>. If not the latter, report the problem to L<https://github.com/Perl/perl5/issues>. =item corrupted regexp pointers (P) The regular expression engine got confused by what the regular expression compiler gave it. =item corrupted regexp program (P) The regular expression engine got passed a regexp program without a valid magic number. =item Corrupt malloc ptr 0x%x at 0x%x (P) The malloc package that comes with Perl had an internal failure. =item Count after length/code in unpack (F) You had an unpack template indicating a counted-length string, but you have also specified an explicit size for the string. See L<perlfunc/pack>. =item Declaring references is experimental (S experimental::declared_refs) This warning is emitted if you use a reference constructor on the right-hand side of C<my>, C<state>, C<our>, or C<local>. Simply suppress the warning if you want to use the feature, but know that in doing so you are taking the risk of using an experimental feature which may change or be removed in a future Perl version: no warnings "experimental::declared_refs"; use feature "declared_refs"; $fooref = my \$foo; =for comment The following are used in lib/diagnostics.t for testing two =items that share the same description. Changes here need to be propagated to there =item Deep recursion on anonymous subroutine =item Deep recursion on subroutine "%s" (W recursion) This subroutine has called itself (directly or indirectly) 100 times more than it has returned. This probably indicates an infinite recursion, unless you're writing strange benchmark programs, in which case it indicates something else. This threshold can be changed from 100, by recompiling the F<perl> binary, setting the C pre-processor macro C<PERL_SUB_DEPTH_WARN> to the desired value. =item (?(DEFINE)....) does not allow branches in regex; marked by S<<-- HERE> in m/%s/ (F) You used something like C<(?(DEFINE)...|..)> which is illegal. The most likely cause of this error is that you left out a parenthesis inside of the C<....> part. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. =item %s defines neither package nor VERSION--version check failed (F) You said something like "use Module 42" but in the Module file there are neither package declarations nor a C<$VERSION>. =item delete argument is not a HASH or ARRAY element or slice (F) The argument to C<delete> must be either a hash or array element, such as: $foo{$bar} $ref->{"susie"}[12] or a hash or array slice, such as: @foo[$bar, $baz, $xyzzy] @{$ref->[12]}{"susie", "queue"} or a hash key/value or array index/value slice, such as: %foo[$bar, $baz, $xyzzy] %{$ref->[12]}{"susie", "queue"} =item Delimiter for here document is too long (F) In a here document construct like C<<<FOO>, the label C<FOO> is too long for Perl to handle. You have to be seriously twisted to write code that triggers this error. =item Deprecated use of my() in false conditional. This will be a fatal error in Perl 5.30 (D deprecated) You used a declaration similar to C<my $x if 0>. There has been a long-standing bug in Perl that causes a lexical variable not to be cleared at scope exit when its declaration includes a false conditional. Some people have exploited this bug to achieve a kind of static variable. Since we intend to fix this bug, we don't want people relying on this behavior. You can achieve a similar static effect by declaring the variable in a separate block outside the function, eg sub f { my $x if 0; return $x++ } becomes { my $x; sub f { return $x++ } } Beginning with perl 5.10.0, you can also use C<state> variables to have lexicals that are initialized only once (see L<feature>): sub f { state $x; return $x++ } This use of C<my()> in a false conditional has been deprecated since Perl 5.10, and it will become a fatal error in Perl 5.30. =item DESTROY created new reference to dead object '%s' (F) A DESTROY() method created a new reference to the object which is just being DESTROYed. Perl is confused, and prefers to abort rather than to create a dangling reference. =item Did not produce a valid header See L</500 Server error>. =item %s did not return a true value (F) A required (or used) file must return a true value to indicate that it compiled correctly and ran its initialization code correctly. It's traditional to end such a file with a "1;", though any true value would do. See L<perlfunc/require>. =item (Did you mean &%s instead?) (W misc) You probably referred to an imported subroutine &FOO as $FOO or some such. =item (Did you mean "local" instead of "our"?) (W shadow) Remember that "our" does not localize the declared global variable. You have declared it again in the same lexical scope, which seems superfluous. =item (Did you mean $ or @ instead of %?) (W) You probably said %hash{$key} when you meant $hash{$key} or @hash{@keys}. On the other hand, maybe you just meant %hash and got carried away. =item Died (F) You passed die() an empty string (the equivalent of C<die "">) or you called it with no args and C<$@> was empty. =item Document contains no data See L</500 Server error>. =item %s does not define %s::VERSION--version check failed (F) You said something like "use Module 42" but the Module did not define a C<$VERSION>. =item '/' does not take a repeat count (F) You cannot put a repeat count of any kind right after the '/' code. See L<perlfunc/pack>. =item do "%s" failed, '.' is no longer in @INC; did you mean do "./%s"? (D deprecated) Previously C< do "somefile"; > would search the current directory for the specified file. Since perl v5.26.0, F<.> has been removed from C<@INC> by default, so this is no longer true. To search the current directory (and only the current directory) you can write C< do "./somefile"; >. =item Don't know how to get file name (P) C<PerlIO_getname>, a perl internal I/O function specific to VMS, was somehow called on another platform. This should not happen. =item Don't know how to handle magic of type \%o (P) The internal handling of magical variables has been cursed. =item do_study: out of memory (P) This should have been caught by safemalloc() instead. =item (Do you need to predeclare %s?) (S syntax) This is an educated guess made in conjunction with the message "%s found where operator expected". It often means a subroutine or module name is being referenced that hasn't been declared yet. This may be because of ordering problems in your file, or because of a missing "sub", "package", "require", or "use" statement. If you're referencing something that isn't defined yet, you don't actually have to define the subroutine or package before the current location. You can use an empty "sub foo;" or "package FOO;" to enter a "forward" declaration. =item dump() must be written as CORE::dump() as of Perl 5.30 (F) You used the obsolete C<dump()> built-in function. That was deprecated in Perl 5.8.0. As of Perl 5.30 it must be written in fully qualified format: C<CORE::dump()>. See L<perlfunc/dump>. =item dump is not supported (F) Your machine doesn't support dump/undump. =item Duplicate free() ignored (S malloc) An internal routine called free() on something that had already been freed. =item Duplicate modifier '%c' after '%c' in %s (W unpack) You have applied the same modifier more than once after a type in a pack template. See L<perlfunc/pack>. =item elseif should be elsif (S syntax) There is no keyword "elseif" in Perl because Larry thinks it's ugly. Your code will be interpreted as an attempt to call a method named "elseif" for the class returned by the following block. This is unlikely to be what you want. =item Empty \%c in regex; marked by S<<-- HERE> in m/%s/ =item Empty \%c{} =item Empty \%c{} in regex; marked by S<<-- HERE> in m/%s/ (F) You used something like C<\b{}>, C<\B{}>, C<\o{}>, C<\p>, C<\P>, or C<\x> without specifying anything for it to operate on. Unfortunately, for backwards compatibility reasons, an empty C<\x> is legal outside S<C<use re 'strict'>> and expands to a NUL character. =item Empty (?) without any modifiers in regex; marked by <-- HERE in m/%s/ (W regexp) (only under C<S<use re 'strict'>>) C<(?)> does nothing, so perhaps this is a typo. =item ${^ENCODING} is no longer supported (F) The special variable C<${^ENCODING}>, formerly used to implement the C<encoding> pragma, is no longer supported as of Perl 5.26.0. Setting it to anything other than C<undef> is a fatal error as of Perl 5.28. =item entering effective %s failed (F) While under the C<use filetest> pragma, switching the real and effective uids or gids failed. =item %ENV is aliased to %s (F) You're running under taint mode, and the C<%ENV> variable has been aliased to another hash, so it doesn't reflect anymore the state of the program's environment. This is potentially insecure. =item Error converting file specification %s (F) An error peculiar to VMS. Because Perl may have to deal with file specifications in either VMS or Unix syntax, it converts them to a single form when it must operate on them directly. Either you've passed an invalid file specification to Perl, or you've found a case the conversion routines don't handle. Drat. =item Error %s in expansion of %s (F) An error was encountered in handling a user-defined property (L<perlunicode/User-Defined Character Properties>). These are programmer written subroutines, hence subject to errors that may prevent them from compiling or running. The calls to these subs are C<eval>'d, and if there is a failure, this message is raised, using the contents of C<$@> from the failed C<eval>. Another possibility is that tainted data was encountered somewhere in the chain of expanding the property. If so, the message wording will indicate that this is the problem. See L</Insecure user-defined property %s>. =item Eval-group in insecure regular expression (F) Perl detected tainted data when trying to compile a regular expression that contains the C<(?{ ... })> zero-width assertion, which is unsafe. See L<perlre/(?{ code })>, and L<perlsec>. =item Eval-group not allowed at runtime, use re 'eval' in regex m/%s/ (F) Perl tried to compile a regular expression containing the C<(?{ ... })> zero-width assertion at run time, as it would when the pattern contains interpolated values. Since that is a security risk, it is not allowed. If you insist, you may still do this by using the C<re 'eval'> pragma or by explicitly building the pattern from an interpolated string at run time and using that in an eval(). See L<perlre/(?{ code })>. =item Eval-group not allowed, use re 'eval' in regex m/%s/ (F) A regular expression contained the C<(?{ ... })> zero-width assertion, but that construct is only allowed when the C<use re 'eval'> pragma is in effect. See L<perlre/(?{ code })>. =item EVAL without pos change exceeded limit in regex; marked by S<<-- HERE> in m/%s/ (F) You used a pattern that nested too many EVAL calls without consuming any text. Restructure the pattern so that text is consumed. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. =item Excessively long <> operator (F) The contents of a <> operator may not exceed the maximum size of a Perl identifier. If you're just trying to glob a long list of filenames, try using the glob() operator, or put the filenames into a variable and glob that. =item exec? I'm not *that* kind of operating system (F) The C<exec> function is not implemented on some systems, e.g., Symbian OS. See L<perlport>. =item %sExecution of %s aborted due to compilation errors. (F) The final summary message when a Perl compilation fails. =item exists argument is not a HASH or ARRAY element or a subroutine (F) The argument to C<exists> must be a hash or array element or a subroutine with an ampersand, such as: $foo{$bar} $ref->{"susie"}[12] &do_something =item exists argument is not a subroutine name (F) The argument to C<exists> for C<exists &sub> must be a subroutine name, and not a subroutine call. C<exists &sub()> will generate this error. =item Exiting eval via %s (W exiting) You are exiting an eval by unconventional means, such as a goto, or a loop control statement. =item Exiting format via %s (W exiting) You are exiting a format by unconventional means, such as a goto, or a loop control statement. =item Exiting pseudo-block via %s (W exiting) You are exiting a rather special block construct (like a sort block or subroutine) by unconventional means, such as a goto, or a loop control statement. See L<perlfunc/sort>. =item Exiting subroutine via %s (W exiting) You are exiting a subroutine by unconventional means, such as a goto, or a loop control statement. =item Exiting substitution via %s (W exiting) You are exiting a substitution by unconventional means, such as a return, a goto, or a loop control statement. =item Expecting close bracket in regex; marked by S<<-- HERE> in m/%s/ (F) You wrote something like (?13 to denote a capturing group of the form L<C<(?I<PARNO>)>|perlre/(?PARNO) (?-PARNO) (?+PARNO) (?R) (?0)>, but omitted the C<")">. =item Expecting interpolated extended charclass in regex; marked by <-- HERE in m/%s/ (F) It looked like you were attempting to interpolate an already-compiled extended character class, like so: my $thai_or_lao = qr/(?[ \p{Thai} + \p{Lao} ])/; ... qr/(?[ \p{Digit} & $thai_or_lao ])/; But the marked code isn't syntactically correct to be such an interpolated class. =item Experimental aliasing via reference not enabled (F) To do aliasing via references, you must first enable the feature: no warnings "experimental::refaliasing"; use feature "refaliasing"; \$x = \$y; =item Experimental %s on scalar is now forbidden (F) An experimental feature added in Perl 5.14 allowed C<each>, C<keys>, C<push>, C<pop>, C<shift>, C<splice>, C<unshift>, and C<values> to be called with a scalar argument. This experiment is considered unsuccessful, and has been removed. The C<postderef> feature may meet your needs better. =item Experimental subroutine signatures not enabled (F) To use subroutine signatures, you must first enable them: no warnings "experimental::signatures"; use feature "signatures"; sub foo ($left, $right) { ... } =item Explicit blessing to '' (assuming package main) (W misc) You are blessing a reference to a zero length string. This has the effect of blessing the reference into the package main. This is usually not what you want. Consider providing a default target package, e.g. bless($ref, $p || 'MyPackage'); =item %s: Expression syntax (A) You've accidentally run your script through B<csh> instead of Perl. Check the #! line, or manually feed your script into Perl yourself. =item %s failed--call queue aborted (F) An untrapped exception was raised while executing a UNITCHECK, CHECK, INIT, or END subroutine. Processing of the remainder of the queue of such routines has been prematurely ended. =item Failed to close in-place work file %s: %s (F) Closing an output file from in-place editing, as with the C<-i> command-line switch, failed. =item False [] range "%s" in regex; marked by S<<-- HERE> in m/%s/ (W regexp)(F) A character class range must start and end at a literal character, not another character class like C<\d> or C<[:alpha:]>. The "-" in your false range is interpreted as a literal "-". In a C<(?[...])> construct, this is an error, rather than a warning. Consider quoting the "-", "\-". The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. See L<perlre>. =item Fatal VMS error (status=%d) at %s, line %d (P) An error peculiar to VMS. Something untoward happened in a VMS system service or RTL routine; Perl's exit status should provide more details. The filename in "at %s" and the line number in "line %d" tell you which section of the Perl source code is distressed. =item fcntl is not implemented (F) Your machine apparently doesn't implement fcntl(). What is this, a PDP-11 or something? =item FETCHSIZE returned a negative value (F) A tied array claimed to have a negative number of elements, which is not possible. =item Field too wide in 'u' format in pack (W pack) Each line in an uuencoded string starts with a length indicator which can't encode values above 63. So there is no point in asking for a line length bigger than that. Perl will behave as if you specified C<u63> as the format. =item File::Glob::glob() will disappear in perl 5.30. Use File::Glob::bsd_glob() instead. (D deprecated) C<< File::Glob >> has a function called C<< glob >>, which just calls C<< bsd_glob >>. However, its prototype is different from the prototype of C<< CORE::glob >>, and hence, C<< File::Glob::glob >> should not be used. C<< File::Glob::glob() >> was deprecated in perl 5.8.0. A deprecation message was issued from perl 5.26.0 onwards, and the function will disappear in perl 5.30.0. Code using C<< File::Glob::glob() >> should call C<< File::Glob::bsd_glob() >> instead. =item Filehandle %s opened only for input (W io) You tried to write on a read-only filehandle. If you intended it to be a read-write filehandle, you needed to open it with "+<" or "+>" or "+>>" instead of with "<" or nothing. If you intended only to write the file, use ">" or ">>". See L<perlfunc/open>. =item Filehandle %s opened only for output (W io) You tried to read from a filehandle opened only for writing, If you intended it to be a read/write filehandle, you needed to open it with "+<" or "+>" or "+>>" instead of with ">". If you intended only to read from the file, use "<". See L<perlfunc/open>. Another possibility is that you attempted to open filedescriptor 0 (also known as STDIN) for output (maybe you closed STDIN earlier?). =item Filehandle %s reopened as %s only for input (W io) You opened for reading a filehandle that got the same filehandle id as STDOUT or STDERR. This occurred because you closed STDOUT or STDERR previously. =item Filehandle STDIN reopened as %s only for output (W io) You opened for writing a filehandle that got the same filehandle id as STDIN. This occurred because you closed STDIN previously. =item Final $ should be \$ or $name (F) You must now decide whether the final $ in a string was meant to be a literal dollar sign, or was meant to introduce a variable name that happens to be missing. So you have to put either the backslash or the name. =item flock() on closed filehandle %s (W closed) The filehandle you're attempting to flock() got itself closed some time before now. Check your control flow. flock() operates on filehandles. Are you attempting to call flock() on a dirhandle by the same name? =item Format not terminated (F) A format must be terminated by a line with a solitary dot. Perl got to the end of your file without finding such a line. =item Format %s redefined (W redefine) You redefined a format. To suppress this warning, say { no warnings 'redefine'; eval "format NAME =..."; } =item Found = in conditional, should be == (W syntax) You said if ($foo = 123) when you meant if ($foo == 123) (or something like that). =item %s found where operator expected (S syntax) The Perl lexer knows whether to expect a term or an operator. If it sees what it knows to be a term when it was expecting to see an operator, it gives you this warning. Usually it indicates that an operator or delimiter was omitted, such as a semicolon. =item gdbm store returned %d, errno %d, key "%s" (S) A warning from the GDBM_File extension that a store failed. =item gethostent not implemented (F) Your C library apparently doesn't implement gethostent(), probably because if it did, it'd feel morally obligated to return every hostname on the Internet. =item get%sname() on closed socket %s (W closed) You tried to get a socket or peer socket name on a closed socket. Did you forget to check the return value of your socket() call? =item getpwnam returned invalid UIC %#o for user "%s" (S) A warning peculiar to VMS. The call to C<sys$getuai> underlying the C<getpwnam> operator returned an invalid UIC. =item getsockopt() on closed socket %s (W closed) You tried to get a socket option on a closed socket. Did you forget to check the return value of your socket() call? See L<perlfunc/getsockopt>. =item given is experimental (S experimental::smartmatch) C<given> depends on smartmatch, which is experimental, so its behavior may change or even be removed in any future release of perl. See the explanation under L<perlsyn/Experimental Details on given and when>. =item Global symbol "%s" requires explicit package name (did you forget to declare "my %s"?) (F) You've said "use strict" or "use strict vars", which indicates that all variables must either be lexically scoped (using "my" or "state"), declared beforehand using "our", or explicitly qualified to say which package the global variable is in (using "::"). =item glob failed (%s) (S glob) Something went wrong with the external program(s) used for C<glob> and C<< <*.c> >>. Usually, this means that you supplied a C<glob> pattern that caused the external program to fail and exit with a nonzero status. If the message indicates that the abnormal exit resulted in a coredump, this may also mean that your csh (C shell) is broken. If so, you should change all of the csh-related variables in config.sh: If you have tcsh, make the variables refer to it as if it were csh (e.g. C<full_csh='/usr/bin/tcsh'>); otherwise, make them all empty (except that C<d_csh> should be C<'undef'>) so that Perl will think csh is missing. In either case, after editing config.sh, run C<./Configure -S> and rebuild Perl. =item Glob not terminated (F) The lexer saw a left angle bracket in a place where it was expecting a term, so it's looking for the corresponding right angle bracket, and not finding it. Chances are you left some needed parentheses out earlier in the line, and you really meant a "less than". =item gmtime(%f) failed (W overflow) You called C<gmtime> with a number that it could not handle: too large, too small, or NaN. The returned value is C<undef>. =item gmtime(%f) too large (W overflow) You called C<gmtime> with a number that was larger than it can reliably handle and C<gmtime> probably returned the wrong date. This warning is also triggered with NaN (the special not-a-number value). =item gmtime(%f) too small (W overflow) You called C<gmtime> with a number that was smaller than it can reliably handle and C<gmtime> probably returned the wrong date. =item Got an error from DosAllocMem (P) An error peculiar to OS/2. Most probably you're using an obsolete version of Perl, and this should not happen anyway. =item goto must have label (F) Unlike with "next" or "last", you're not allowed to goto an unspecified destination. See L<perlfunc/goto>. =item Goto undefined subroutine%s (F) You tried to call a subroutine with C<goto &sub> syntax, but the indicated subroutine hasn't been defined, or if it was, it has since been undefined. =item Group name must start with a non-digit word character in regex; marked by S<<-- HERE> in m/%s/ (F) Group names must follow the rules for perl identifiers, meaning they must start with a non-digit word character. A common cause of this error is using (?&0) instead of (?0). See L<perlre>. =item ()-group starts with a count (F) A ()-group started with a count. A count is supposed to follow something: a template character or a ()-group. See L<perlfunc/pack>. =item %s had compilation errors. (F) The final summary message when a C<perl -c> fails. =item Had to create %s unexpectedly (S internal) A routine asked for a symbol from a symbol table that ought to have existed already, but for some reason it didn't, and had to be created on an emergency basis to prevent a core dump. =item %s has too many errors (F) The parser has given up trying to parse the program after 10 errors. Further error messages would likely be uninformative. =item Hexadecimal float: exponent overflow (W overflow) The hexadecimal floating point has a larger exponent than the floating point supports. =item Hexadecimal float: exponent underflow (W overflow) The hexadecimal floating point has a smaller exponent than the floating point supports. With the IEEE 754 floating point, this may also mean that the subnormals (formerly known as denormals) are being used, which may or may not be an error. =item Hexadecimal float: internal error (%s) (F) Something went horribly bad in hexadecimal float handling. =item Hexadecimal float: mantissa overflow (W overflow) The hexadecimal floating point literal had more bits in the mantissa (the part between the 0x and the exponent, also known as the fraction or the significand) than the floating point supports. =item Hexadecimal float: precision loss (W overflow) The hexadecimal floating point had internally more digits than could be output. This can be caused by unsupported long double formats, or by 64-bit integers not being available (needed to retrieve the digits under some configurations). =item Hexadecimal float: unsupported long double format (F) You have configured Perl to use long doubles but the internals of the long double format are unknown; therefore the hexadecimal float output is impossible. =item Hexadecimal number > 0xffffffff non-portable (W portable) The hexadecimal number you specified is larger than 2**32-1 (4294967295) and therefore non-portable between systems. See L<perlport> for more on portability concerns. =item Identifier too long (F) Perl limits identifiers (names for variables, functions, etc.) to about 250 characters for simple names, and somewhat more for compound names (like C<$A::B>). You've exceeded Perl's limits. Future versions of Perl are likely to eliminate these arbitrary limitations. =item Ignoring zero length \N{} in character class in regex; marked by S<<-- HERE> in m/%s/ (W regexp) Named Unicode character escapes (C<\N{...}>) may return a zero-length sequence. When such an escape is used in a character class its behavior is not well defined. Check that the correct escape has been used, and the correct charname handler is in scope. =item Illegal %s digit '%c' ignored (W digit) Here C<%s> is one of "binary", "octal", or "hex". You may have tried to use a digit other than one that is legal for the given type, such as only 0 and 1 for binary. For octals, this is raised only if the illegal character is an '8' or '9'. For hex, 'A' - 'F' and 'a' - 'f' are legal. Interpretation of the number stopped just before the offending digit or character. =item Illegal binary digit '%c' (F) You used a digit other than 0 or 1 in a binary number. =item Illegal character after '_' in prototype for %s : %s (W illegalproto) An illegal character was found in a prototype declaration. The '_' in a prototype must be followed by a ';', indicating the rest of the parameters are optional, or one of '@' or '%', since those two will accept 0 or more final parameters. =item Illegal character \%o (carriage return) (F) Perl normally treats carriage returns in the program text as it would any other whitespace, which means you should never see this error when Perl was built using standard options. For some reason, your version of Perl appears to have been built without this support. Talk to your Perl administrator. =item Illegal character following sigil in a subroutine signature (F) A parameter in a subroutine signature contained an unexpected character following the C<$>, C<@> or C<%> sigil character. Normally the sigil should be followed by the variable name or C<=> etc. Perhaps you are trying use a prototype while in the scope of C<use feature 'signatures'>? For example: sub foo ($$) {} # legal - a prototype use feature 'signatures; sub foo ($$) {} # illegal - was expecting a signature sub foo ($a, $b) :prototype($$) {} # legal =item Illegal character in prototype for %s : %s (W illegalproto) An illegal character was found in a prototype declaration. Legal characters in prototypes are $, @, %, *, ;, [, ], &, \, and +. Perhaps you were trying to write a subroutine signature but didn't enable that feature first (C<use feature 'signatures'>), so your signature was instead interpreted as a bad prototype. =item Illegal declaration of anonymous subroutine (F) When using the C<sub> keyword to construct an anonymous subroutine, you must always specify a block of code. See L<perlsub>. =item Illegal declaration of subroutine %s (F) A subroutine was not declared correctly. See L<perlsub>. =item Illegal division by zero (F) You tried to divide a number by 0. Either something was wrong in your logic, or you need to put a conditional in to guard against meaningless input. =item Illegal modulus zero (F) You tried to divide a number by 0 to get the remainder. Most numbers don't take to this kindly. =item Illegal number of bits in vec (F) The number of bits in vec() (the third argument) must be a power of two from 1 to 32 (or 64, if your platform supports that). =item Illegal octal digit '%c' (F) You used an 8 or 9 in an octal number. =item Illegal operator following parameter in a subroutine signature (F) A parameter in a subroutine signature, was followed by something other than C<=> introducing a default, C<,> or C<)>. use feature 'signatures'; sub foo ($=1) {} # legal sub foo ($a = 1) {} # legal sub foo ($a += 1) {} # illegal sub foo ($a == 1) {} # illegal =item Illegal pattern in regex; marked by S<<-- HERE> in m/%s/ (F) You wrote something like (?+foo) The C<"+"> is valid only when followed by digits, indicating a capturing group. See L<C<(?I<PARNO>)>|perlre/(?PARNO) (?-PARNO) (?+PARNO) (?R) (?0)>. =item Illegal suidscript (F) The script run under suidperl was somehow illegal. =item Illegal switch in PERL5OPT: -%c (X) The PERL5OPT environment variable may only be used to set the following switches: B<-[CDIMUdmtw]>. =item Illegal user-defined property name (F) You specified a Unicode-like property name in a regular expression pattern (using C<\p{}> or C<\P{}>) that Perl knows isn't an official Unicode property, and was likely meant to be a user-defined property name, but it can't be one of those, as they must begin with either C<In> or C<Is>. Check the spelling. See also L</Can't find Unicode property definition "%s">. =item Ill-formed CRTL environ value "%s" (W internal) A warning peculiar to VMS. Perl tried to read the CRTL's internal environ array, and encountered an element without the C<=> delimiter used to separate keys from values. The element is ignored. =item Ill-formed message in prime_env_iter: |%s| (W internal) A warning peculiar to VMS. Perl tried to read a logical name or CLI symbol definition when preparing to iterate over %ENV, and didn't see the expected delimiter between key and value, so the line was ignored. =item (in cleanup) %s (W misc) This prefix usually indicates that a DESTROY() method raised the indicated exception. Since destructors are usually called by the system at arbitrary points during execution, and often a vast number of times, the warning is issued only once for any number of failures that would otherwise result in the same message being repeated. Failure of user callbacks dispatched using the C<G_KEEPERR> flag could also result in this warning. See L<perlcall/G_KEEPERR>. =item Incomplete expression within '(?[ ])' in regex; marked by S<<-- HERE> in m/%s/ (F) There was a syntax error within the C<(?[ ])>. This can happen if the expression inside the construct was completely empty, or if there are too many or few operands for the number of operators. Perl is not smart enough to give you a more precise indication as to what is wrong. =item Inconsistent hierarchy during C3 merge of class '%s': merging failed on parent '%s' (F) The method resolution order (MRO) of the given class is not C3-consistent, and you have enabled the C3 MRO for this class. See the C3 documentation in L<mro> for more information. =item Indentation on line %d of here-doc doesn't match delimiter (F) You have an indented here-document where one or more of its lines have whitespace at the beginning that does not match the closing delimiter. For example, line 2 below is wrong because it does not have at least 2 spaces, but lines 1 and 3 are fine because they have at least 2: if ($something) { print <<~EOF; Line 1 Line 2 not Line 3 EOF } Note that tabs and spaces are compared strictly, meaning 1 tab will not match 8 spaces. =item Infinite recursion in regex (F) You used a pattern that references itself without consuming any input text. You should check the pattern to ensure that recursive patterns either consume text or fail. =item Infinite recursion in user-defined property (F) A user-defined property (L<perlunicode/User-Defined Character Properties>) can depend on the definitions of other user-defined properties. If the chain of dependencies leads back to this property, infinite recursion would occur, were it not for the check that raised this error. Restructure your property definitions to avoid this. =item Infinite recursion via empty pattern (F) You tried to use the empty pattern inside of a regex code block, for instance C</(?{ s!!! })/>, which resulted in re-executing the same pattern, which is an infinite loop which is broken by throwing an exception. =item Initialization of state variables in list currently forbidden (F) C<state> only permits initializing a single variable, specified without parentheses. So C<state $a = 42> and C<state @a = qw(a b c)> are allowed, but not C<state ($a) = 42> or C<(state $a) = 42>. To initialize more than one C<state> variable, initialize them one at a time. =item %%s[%s] in scalar context better written as $%s[%s] (W syntax) In scalar context, you've used an array index/value slice (indicated by %) to select a single element of an array. Generally it's better to ask for a scalar value (indicated by $). The difference is that C<$foo[&bar]> always behaves like a scalar, both in the value it returns and when evaluating its argument, while C<%foo[&bar]> provides a list context to its subscript, which can do weird things if you're expecting only one subscript. When called in list context, it also returns the index (what C<&bar> returns) in addition to the value. =item %%s{%s} in scalar context better written as $%s{%s} (W syntax) In scalar context, you've used a hash key/value slice (indicated by %) to select a single element of a hash. Generally it's better to ask for a scalar value (indicated by $). The difference is that C<$foo{&bar}> always behaves like a scalar, both in the value it returns and when evaluating its argument, while C<@foo{&bar}> and provides a list context to its subscript, which can do weird things if you're expecting only one subscript. When called in list context, it also returns the key in addition to the value. =item Insecure dependency in %s (F) You tried to do something that the tainting mechanism didn't like. The tainting mechanism is turned on when you're running setuid or setgid, or when you specify B<-T> to turn it on explicitly. The tainting mechanism labels all data that's derived directly or indirectly from the user, who is considered to be unworthy of your trust. If any such data is used in a "dangerous" operation, you get this error. See L<perlsec> for more information. =item Insecure directory in %s (F) You can't use system(), exec(), or a piped open in a setuid or setgid script if C<$ENV{PATH}> contains a directory that is writable by the world. Also, the PATH must not contain any relative directory. See L<perlsec>. =item Insecure $ENV{%s} while running %s (F) You can't use system(), exec(), or a piped open in a setuid or setgid script if any of C<$ENV{PATH}>, C<$ENV{IFS}>, C<$ENV{CDPATH}>, C<$ENV{ENV}>, C<$ENV{BASH_ENV}> or C<$ENV{TERM}> are derived from data supplied (or potentially supplied) by the user. The script must set the path to a known value, using trustworthy data. See L<perlsec>. =item Insecure user-defined property %s (F) Perl detected tainted data when trying to compile a regular expression that contains a call to a user-defined character property function, i.e. C<\p{IsFoo}> or C<\p{InFoo}>. See L<perlunicode/User-Defined Character Properties> and L<perlsec>. =item Integer overflow in format string for %s (F) The indexes and widths specified in the format string of C<printf()> or C<sprintf()> are too large. The numbers must not overflow the size of integers for your architecture. =item Integer overflow in %s number (S overflow) The hexadecimal, octal or binary number you have specified either as a literal or as an argument to hex() or oct() is too big for your architecture, and has been converted to a floating point number. On a 32-bit architecture the largest hexadecimal, octal or binary number representable without overflow is 0xFFFFFFFF, 037777777777, or 0b11111111111111111111111111111111 respectively. Note that Perl transparently promotes all numbers to a floating point representation internally--subject to loss of precision errors in subsequent operations. =item Integer overflow in srand (S overflow) The number you have passed to srand is too big to fit in your architecture's integer representation. The number has been replaced with the largest integer supported (0xFFFFFFFF on 32-bit architectures). This means you may be getting less randomness than you expect, because different random seeds above the maximum will return the same sequence of random numbers. =item Integer overflow in version =item Integer overflow in version %d (W overflow) Some portion of a version initialization is too large for the size of integers for your architecture. This is not a warning because there is no rational reason for a version to try and use an element larger than typically 2**32. This is usually caused by trying to use some odd mathematical operation as a version, like 100/9. =item Internal disaster in regex; marked by S<<-- HERE> in m/%s/ (P) Something went badly wrong in the regular expression parser. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. =item Internal inconsistency in tracking vforks (S) A warning peculiar to VMS. Perl keeps track of the number of times you've called C<fork> and C<exec>, to determine whether the current call to C<exec> should affect the current script or a subprocess (see L<perlvms/"exec LIST">). Somehow, this count has become scrambled, so Perl is making a guess and treating this C<exec> as a request to terminate the Perl script and execute the specified command. =item internal %<num>p might conflict with future printf extensions (S internal) Perl's internal routine that handles C<printf> and C<sprintf> formatting follows a slightly different set of rules when called from C or XS code. Specifically, formats consisting of digits followed by "p" (e.g., "%7p") are reserved for future use. If you see this message, then an XS module tried to call that routine with one such reserved format. =item Internal urp in regex; marked by S<<-- HERE> in m/%s/ (P) Something went badly awry in the regular expression parser. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. =item %s (...) interpreted as function (W syntax) You've run afoul of the rule that says that any list operator followed by parentheses turns into a function, with all the list operators arguments found inside the parentheses. See L<perlop/Terms and List Operators (Leftward)>. =item In '(?...)', the '(' and '?' must be adjacent in regex; marked by S<<-- HERE> in m/%s/ (F) The two-character sequence C<"(?"> in this context in a regular expression pattern should be an indivisible token, with nothing intervening between the C<"("> and the C<"?">, but you separated them with whitespace. =item In '(*...)', the '(' and '*' must be adjacent in regex; marked by S<<-- HERE> in m/%s/ (F) The two-character sequence C<"(*"> in this context in a regular expression pattern should be an indivisible token, with nothing intervening between the C<"("> and the C<"*">, but you separated them. Fix the pattern and retry. =item Invalid %s attribute: %s (F) The indicated attribute for a subroutine or variable was not recognized by Perl or by a user-supplied handler. See L<attributes>. =item Invalid %s attributes: %s (F) The indicated attributes for a subroutine or variable were not recognized by Perl or by a user-supplied handler. See L<attributes>. =item Invalid character in charnames alias definition; marked by S<<-- HERE> in '%s (F) You tried to create a custom alias for a character name, with the C<:alias> option to C<use charnames> and the specified character in the indicated name isn't valid. See L<charnames/CUSTOM ALIASES>. =item Invalid \0 character in %s for %s: %s\0%s (W syscalls) Embedded \0 characters in pathnames or other system call arguments produce a warning as of 5.20. The parts after the \0 were formerly ignored by system calls. =item Invalid character in \N{...}; marked by S<<-- HERE> in \N{%s} (F) Only certain characters are valid for character names. The indicated one isn't. See L<charnames/CUSTOM ALIASES>. =item Invalid conversion in %s: "%s" (W printf) Perl does not understand the given format conversion. See L<perlfunc/sprintf>. =item Invalid escape in the specified encoding in regex; marked by S<<-- HERE> in m/%s/ (W regexp)(F) The numeric escape (for example C<\xHH>) of value < 256 didn't correspond to a single character through the conversion from the encoding specified by the encoding pragma. The escape was replaced with REPLACEMENT CHARACTER (U+FFFD) instead, except within S<C<(?[ ])>>, where it is a fatal error. The S<<-- HERE> shows whereabouts in the regular expression the escape was discovered. =item Invalid hexadecimal number in \N{U+...} =item Invalid hexadecimal number in \N{U+...} in regex; marked by S<<-- HERE> in m/%s/ (F) The character constant represented by C<...> is not a valid hexadecimal number. Either it is empty, or you tried to use a character other than 0 - 9 or A - F, a - f in a hexadecimal number. =item Invalid module name %s with -%c option: contains single ':' (F) The module argument to perl's B<-m> and B<-M> command-line options cannot contain single colons in the module name, but only in the arguments after "=". In other words, B<-MFoo::Bar=:baz> is ok, but B<-MFoo:Bar=baz> is not. =item Invalid mro name: '%s' (F) You tried to C<mro::set_mro("classname", "foo")> or C<use mro 'foo'>, where C<foo> is not a valid method resolution order (MRO). Currently, the only valid ones supported are C<dfs> and C<c3>, unless you have loaded a module that is a MRO plugin. See L<mro> and L<perlmroapi>. =item Invalid negative number (%s) in chr (W utf8) You passed a negative number to C<chr>. Negative numbers are not valid character numbers, so it returns the Unicode replacement character (U+FFFD). =item Invalid number '%s' for -C option. (F) You supplied a number to the -C option that either has extra leading zeroes or overflows perl's unsigned integer representation. =item invalid option -D%c, use -D'' to see choices (S debugging) Perl was called with invalid debugger flags. Call perl with the B<-D> option with no flags to see the list of acceptable values. See also L<perlrun/-Dletters>. =item Invalid quantifier in {,} in regex; marked by S<<-- HERE> in m/%s/ (F) The pattern looks like a {min,max} quantifier, but the min or max could not be parsed as a valid number - either it has leading zeroes, or it represents too big a number to cope with. The S<<-- HERE> shows where in the regular expression the problem was discovered. See L<perlre>. =item Invalid [] range "%s" in regex; marked by S<<-- HERE> in m/%s/ (F) The range specified in a character class had a minimum character greater than the maximum character. One possibility is that you forgot the C<{}> from your ending C<\x{}> - C<\x> without the curly braces can go only up to C<ff>. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. See L<perlre>. =item Invalid range "%s" in transliteration operator (F) The range specified in the tr/// or y/// operator had a minimum character greater than the maximum character. See L<perlop>. =item Invalid reference to group in regex; marked by S<<-- HERE> in m/%s/ (F) The capture group you specified can't possibly exist because the number you used is not within the legal range of possible values for this machine. =item Invalid separator character %s in attribute list (F) Something other than a colon or whitespace was seen between the elements of an attribute list. If the previous attribute had a parenthesised parameter list, perhaps that list was terminated too soon. See L<attributes>. =item Invalid separator character %s in PerlIO layer specification %s (W layer) When pushing layers onto the Perl I/O system, something other than a colon or whitespace was seen between the elements of a layer list. If the previous attribute had a parenthesised parameter list, perhaps that list was terminated too soon. =item Invalid strict version format (%s) (F) A version number did not meet the "strict" criteria for versions. A "strict" version number is a positive decimal number (integer or decimal-fraction) without exponentiation or else a dotted-decimal v-string with a leading 'v' character and at least three components. The parenthesized text indicates which criteria were not met. See the L<version> module for more details on allowed version formats. =item Invalid type '%s' in %s (F) The given character is not a valid pack or unpack type. See L<perlfunc/pack>. (W) The given character is not a valid pack or unpack type but used to be silently ignored. =item Invalid version format (%s) (F) A version number did not meet the "lax" criteria for versions. A "lax" version number is a positive decimal number (integer or decimal-fraction) without exponentiation or else a dotted-decimal v-string. If the v-string has fewer than three components, it must have a leading 'v' character. Otherwise, the leading 'v' is optional. Both decimal and dotted-decimal versions may have a trailing "alpha" component separated by an underscore character after a fractional or dotted-decimal component. The parenthesized text indicates which criteria were not met. See the L<version> module for more details on allowed version formats. =item Invalid version object (F) The internal structure of the version object was invalid. Perhaps the internals were modified directly in some way or an arbitrary reference was blessed into the "version" class. =item In '(*VERB...)', the '(' and '*' must be adjacent in regex; marked by S<<-- HERE> in m/%s/ =item Inverting a character class which contains a multi-character sequence is illegal in regex; marked by <-- HERE in m/%s/ (F) You wrote something like qr/\P{name=KATAKANA LETTER AINU P}/ qr/[^\p{name=KATAKANA LETTER AINU P}]/ This name actually evaluates to a sequence of two Katakana characters, not just a single one, and it is illegal to try to take the complement of a sequence. (Mathematically it would mean any sequence of characters from 0 to infinity in length that weren't these two in a row, and that is likely not of any real use.) (F) The two-character sequence C<"(*"> in this context in a regular expression pattern should be an indivisible token, with nothing intervening between the C<"("> and the C<"*">, but you separated them. =item ioctl is not implemented (F) Your machine apparently doesn't implement ioctl(), which is pretty strange for a machine that supports C. =item ioctl() on unopened %s (W unopened) You tried ioctl() on a filehandle that was never opened. Check your control flow and number of arguments. =item IO layers (like '%s') unavailable (F) Your Perl has not been configured to have PerlIO, and therefore you cannot use IO layers. To have PerlIO, Perl must be configured with 'useperlio'. =item IO::Socket::atmark not implemented on this architecture (F) Your machine doesn't implement the sockatmark() functionality, neither as a system call nor an ioctl call (SIOCATMARK). =item '%s' is an unknown bound type in regex; marked by S<<-- HERE> in m/%s/ (F) You used C<\b{...}> or C<\B{...}> and the C<...> is not known to Perl. The current valid ones are given in L<perlrebackslash/\b{}, \b, \B{}, \B>. =item %s is forbidden - matches null string many times in regex; marked by S<<-- HERE> in m/%s/ (F) The pattern you've specified might cause the regular expression to infinite loop so it is forbidden. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. See L<perlre>. =item %s() isn't allowed on :utf8 handles (F) The sysread(), recv(), syswrite() and send() operators are not allowed on handles that have the C<:utf8> layer, either explicitly, or implicitly, eg., with the C<:encoding(UTF-16LE)> layer. Previously sysread() and recv() currently use only the C<:utf8> flag for the stream, ignoring the actual layers. Since sysread() and recv() did no UTF-8 validation they can end up creating invalidly encoded scalars. Similarly, syswrite() and send() used only the C<:utf8> flag, otherwise ignoring any layers. If the flag is set, both wrote the value UTF-8 encoded, even if the layer is some different encoding, such as the example above. Ideally, all of these operators would completely ignore the C<:utf8> state, working only with bytes, but this would result in silently breaking existing code. =item "%s" is more clearly written simply as "%s" in regex; marked by S<<-- HERE> in m/%s/ (W regexp) (only under C<S<use re 'strict'>> or within C<(?[...])>) You specified a character that has the given plainer way of writing it, and which is also portable to platforms running with different character sets. =item $* is no longer supported as of Perl 5.30 (F) The special variable C<$*>, deprecated in older perls, was removed in 5.10.0, is no longer supported and is a fatal error as of Perl 5.30. In previous versions of perl the use of C<$*> enabled or disabled multi-line matching within a string. Instead of using C<$*> you should use the C</m> (and maybe C</s>) regexp modifiers. You can enable C</m> for a lexical scope (even a whole file) with C<use re '/m'>. (In older versions: when C<$*> was set to a true value then all regular expressions behaved as if they were written using C</m>.) Use of this variable will be a fatal error in Perl 5.30. =item $# is no longer supported as of Perl 5.30 (F) The special variable C<$#>, deprecated in older perls, was removed as of 5.10.0, is no longer supported and is a fatal error as of Perl 5.30. You should use the printf/sprintf functions instead. =item '%s' is not a code reference (W overload) The second (fourth, sixth, ...) argument of overload::constant needs to be a code reference. Either an anonymous subroutine, or a reference to a subroutine. =item '%s' is not an overloadable type (W overload) You tried to overload a constant type the overload package is unaware of. =item isa is experimental (S experimental::isa) This warning is emitted if you use the (C<isa>) operator. This operator is currently experimental and its behaviour may change in future releases of Perl. =item -i used with no filenames on the command line, reading from STDIN (S inplace) The C<-i> option was passed on the command line, indicating that the script is intended to edit files in place, but no files were given. This is usually a mistake, since editing STDIN in place doesn't make sense, and can be confusing because it can make perl look like it is hanging when it is really just trying to read from STDIN. You should either pass a filename to edit, or remove C<-i> from the command line. See L<perlrun|perlrun/-i[extension]> for more details. =item Junk on end of regexp in regex m/%s/ (P) The regular expression parser is confused. =item \K not permitted in lookahead/lookbehind in regex; marked by <-- HERE in m/%s/ (F) Your regular expression used C<\K> in a lookahead or lookbehind assertion, which currently isn't permitted. This may change in the future, see L<Support \K in lookarounds|https://github.com/Perl/perl5/issues/18134>. =item Label not found for "last %s" (F) You named a loop to break out of, but you're not currently in a loop of that name, not even if you count where you were called from. See L<perlfunc/last>. =item Label not found for "next %s" (F) You named a loop to continue, but you're not currently in a loop of that name, not even if you count where you were called from. See L<perlfunc/last>. =item Label not found for "redo %s" (F) You named a loop to restart, but you're not currently in a loop of that name, not even if you count where you were called from. See L<perlfunc/last>. =item leaving effective %s failed (F) While under the C<use filetest> pragma, switching the real and effective uids or gids failed. =item length/code after end of string in unpack (F) While unpacking, the string buffer was already used up when an unpack length/code combination tried to obtain more data. This results in an undefined value for the length. See L<perlfunc/pack>. =item length() used on %s (did you mean "scalar(%s)"?) (W syntax) You used length() on either an array or a hash when you probably wanted a count of the items. Array size can be obtained by doing: scalar(@array); The number of items in a hash can be obtained by doing: scalar(keys %hash); =item Lexing code attempted to stuff non-Latin-1 character into Latin-1 input (F) An extension is attempting to insert text into the current parse (using L<lex_stuff_pvn|perlapi/lex_stuff_pvn> or similar), but tried to insert a character that couldn't be part of the current input. This is an inherent pitfall of the stuffing mechanism, and one of the reasons to avoid it. Where it is necessary to stuff, stuffing only plain ASCII is recommended. =item Lexing code internal error (%s) (F) Lexing code supplied by an extension violated the lexer's API in a detectable way. =item listen() on closed socket %s (W closed) You tried to do a listen on a closed socket. Did you forget to check the return value of your socket() call? See L<perlfunc/listen>. =item List form of piped open not implemented (F) On some platforms, notably Windows, the three-or-more-arguments form of C<open> does not support pipes, such as C<open($pipe, '|-', @args)>. Use the two-argument C<open($pipe, '|prog arg1 arg2...')> form instead. =item Literal vertical space in [] is illegal except under /x in regex; marked by S<<-- HERE> in m/%s/ (F) (only under C<S<use re 'strict'>> or within C<(?[...])>) Likely you forgot the C</x> modifier or there was a typo in the pattern. For example, did you really mean to match a form-feed? If so, all the ASCII vertical space control characters are representable by escape sequences which won't present such a jarring appearance as your pattern does when displayed. \r carriage return \f form feed \n line feed \cK vertical tab =item %s: loadable library and perl binaries are mismatched (got handshake key %p, needed %p) (P) A dynamic loading library C<.so> or C<.dll> was being loaded into the process that was built against a different build of perl than the said library was compiled against. Reinstalling the XS module will likely fix this error. =item Locale '%s' contains (at least) the following characters which have unexpected meanings: %s The Perl program will use the expected meanings (W locale) You are using the named UTF-8 locale. UTF-8 locales are expected to have very particular behavior, which most do. This message arises when perl found some departures from the expectations, and is notifying you that the expected behavior overrides these differences. In some cases the differences are caused by the locale definition being defective, but the most common causes of this warning are when there are ambiguities and conflicts in following the Standard, and the locale has chosen an approach that differs from Perl's. One of these is because that, contrary to the claims, Unicode is not completely locale insensitive. Turkish and some related languages have two types of C<"I"> characters. One is dotted in both upper- and lowercase, and the other is dotless in both cases. Unicode allows a locale to use either the Turkish rules, or the rules used in all other instances, where there is only one type of C<"I">, which is dotless in the uppercase, and dotted in the lower. The perl core does not (yet) handle the Turkish case, and this message warns you of that. Instead, the L<Unicode::Casing> module allows you to mostly implement the Turkish casing rules. The other common cause is for the characters $ + < = > ^ ` | ~ These are probematic. The C standard says that these should be considered punctuation in the C locale (and the POSIX standard defers to the C standard), and Unicode is generally considered a superset of the C locale. But Unicode has added an extra category, "Symbol", and classifies these particular characters as being symbols. Most UTF-8 locales have them treated as punctuation, so that L<ispunct(2)> returns non-zero for them. But a few locales have it return 0. Perl takes the first approach, not using C<ispunct()> at all (see L<Note [5] in perlrecharclass|perlrecharclass/[5]>), and this message is raised to notify you that you are getting Perl's approach, not the locale's. =item Locale '%s' may not work well.%s (W locale) You are using the named locale, which is a non-UTF-8 one, and which perl has determined is not fully compatible with what it can handle. The second C<%s> gives a reason. By far the most common reason is that the locale has characters in it that are represented by more than one byte. The only such locales that Perl can handle are the UTF-8 locales. Most likely the specified locale is a non-UTF-8 one for an East Asian language such as Chinese or Japanese. If the locale is a superset of ASCII, the ASCII portion of it may work in Perl. Some essentially obsolete locales that aren't supersets of ASCII, mainly those in ISO 646 or other 7-bit locales, such as ASMO 449, can also have problems, depending on what portions of the ASCII character set get changed by the locale and are also used by the program. The warning message lists the determinable conflicting characters. Note that not all incompatibilities are found. If this happens to you, there's not much you can do except switch to use a different locale or use L<Encode> to translate from the locale into UTF-8; if that's impracticable, you have been warned that some things may break. This message is output once each time a bad locale is switched into within the scope of C<S<use locale>>, or on the first possibly-affected operation if the C<S<use locale>> inherits a bad one. It is not raised for any operations from the L<POSIX> module. =item localtime(%f) failed (W overflow) You called C<localtime> with a number that it could not handle: too large, too small, or NaN. The returned value is C<undef>. =item localtime(%f) too large (W overflow) You called C<localtime> with a number that was larger than it can reliably handle and C<localtime> probably returned the wrong date. This warning is also triggered with NaN (the special not-a-number value). =item localtime(%f) too small (W overflow) You called C<localtime> with a number that was smaller than it can reliably handle and C<localtime> probably returned the wrong date. =item Lookbehind longer than %d not implemented in regex m/%s/ (F) There is currently a limit on the length of string which lookbehind can handle. This restriction may be eased in a future release. =item Lost precision when %s %f by 1 (W imprecision) The value you attempted to increment or decrement by one is too large for the underlying floating point representation to store accurately, hence the target of C<++> or C<--> is unchanged. Perl issues this warning because it has already switched from integers to floating point when values are too large for integers, and now even floating point is insufficient. You may wish to switch to using L<Math::BigInt> explicitly. =item lstat() on filehandle%s (W io) You tried to do an lstat on a filehandle. What did you mean by that? lstat() makes sense only on filenames. (Perl did a fstat() instead on the filehandle.) =item lvalue attribute %s already-defined subroutine (W misc) Although L<attributes.pm|attributes> allows this, turning the lvalue attribute on or off on a Perl subroutine that is already defined does not always work properly. It may or may not do what you want, depending on what code is inside the subroutine, with exact details subject to change between Perl versions. Only do this if you really know what you are doing. =item lvalue attribute ignored after the subroutine has been defined (W misc) Using the C<:lvalue> declarative syntax to make a Perl subroutine an lvalue subroutine after it has been defined is not permitted. To make the subroutine an lvalue subroutine, add the lvalue attribute to the definition, or put the C<sub foo :lvalue;> declaration before the definition. See also L<attributes.pm|attributes>. =item Magical list constants are not supported (F) You assigned a magical array to a stash element, and then tried to use the subroutine from the same slot. You are asking Perl to do something it cannot do, details subject to change between Perl versions. =item Malformed integer in [] in pack (F) Between the brackets enclosing a numeric repeat count only digits are permitted. See L<perlfunc/pack>. =item Malformed integer in [] in unpack (F) Between the brackets enclosing a numeric repeat count only digits are permitted. See L<perlfunc/pack>. =item Malformed PERLLIB_PREFIX (F) An error peculiar to OS/2. PERLLIB_PREFIX should be of the form prefix1;prefix2 or prefix1 prefix2 with nonempty prefix1 and prefix2. If C<prefix1> is indeed a prefix of a builtin library search path, prefix2 is substituted. The error may appear if components are not found, or are too long. See "PERLLIB_PREFIX" in L<perlos2>. =item Malformed prototype for %s: %s (F) You tried to use a function with a malformed prototype. The syntax of function prototypes is given a brief compile-time check for obvious errors like invalid characters. A more rigorous check is run when the function is called. Perhaps the function's author was trying to write a subroutine signature but didn't enable that feature first (C<use feature 'signatures'>), so the signature was instead interpreted as a bad prototype. =item Malformed UTF-8 character%s (S utf8)(F) Perl detected a string that should be UTF-8, but didn't comply with UTF-8 encoding rules, or represents a code point whose ordinal integer value doesn't fit into the word size of the current platform (overflows). Details as to the exact malformation are given in the variable, C<%s>, part of the message. One possible cause is that you set the UTF8 flag yourself for data that you thought to be in UTF-8 but it wasn't (it was for example legacy 8-bit data). To guard against this, you can use C<Encode::decode('UTF-8', ...)>. If you use the C<:encoding(UTF-8)> PerlIO layer for input, invalid byte sequences are handled gracefully, but if you use C<:utf8>, the flag is set without validating the data, possibly resulting in this error message. See also L<Encode/"Handling Malformed Data">. =item Malformed UTF-8 returned by \N{%s} immediately after '%s' (F) The charnames handler returned malformed UTF-8. =item Malformed UTF-8 string in "%s" (F) This message indicates a bug either in the Perl core or in XS code. Such code was trying to find out if a character, allegedly stored internally encoded as UTF-8, was of a given type, such as being punctuation or a digit. But the character was not encoded in legal UTF-8. The C<%s> is replaced by a string that can be used by knowledgeable people to determine what the type being checked against was. Passing malformed strings was deprecated in Perl 5.18, and became fatal in Perl 5.26. =item Malformed UTF-8 string in '%c' format in unpack (F) You tried to unpack something that didn't comply with UTF-8 encoding rules and perl was unable to guess how to make more progress. =item Malformed UTF-8 string in pack (F) You tried to pack something that didn't comply with UTF-8 encoding rules and perl was unable to guess how to make more progress. =item Malformed UTF-8 string in unpack (F) You tried to unpack something that didn't comply with UTF-8 encoding rules and perl was unable to guess how to make more progress. =item Malformed UTF-16 surrogate (F) Perl thought it was reading UTF-16 encoded character data but while doing it Perl met a malformed Unicode surrogate. =item Mandatory parameter follows optional parameter (F) In a subroutine signature, you wrote something like "$a = undef, $b", making an earlier parameter optional and a later one mandatory. Parameters are filled from left to right, so it's impossible for the caller to omit an earlier one and pass a later one. If you want to act as if the parameters are filled from right to left, declare the rightmost optional and then shuffle the parameters around in the subroutine's body. =item Matched non-Unicode code point 0x%X against Unicode property; may not be portable (S non_unicode) Perl allows strings to contain a superset of Unicode code points; each code point may be as large as what is storable in a signed integer on your system, but these may not be accepted by other languages/systems. This message occurs when you matched a string containing such a code point against a regular expression pattern, and the code point was matched against a Unicode property, C<\p{...}> or C<\P{...}>. Unicode properties are only defined on Unicode code points, so the result of this match is undefined by Unicode, but Perl (starting in v5.20) treats non-Unicode code points as if they were typical unassigned Unicode ones, and matched this one accordingly. Whether a given property matches these code points or not is specified in L<perluniprops/Properties accessible through \p{} and \P{}>. This message is suppressed (unless it has been made fatal) if it is immaterial to the results of the match if the code point is Unicode or not. For example, the property C<\p{ASCII_Hex_Digit}> only can match the 22 characters C<[0-9A-Fa-f]>, so obviously all other code points, Unicode or not, won't match it. (And C<\P{ASCII_Hex_Digit}> will match every code point except these 22.) Getting this message indicates that the outcome of the match arguably should have been the opposite of what actually happened. If you think that is the case, you may wish to make the C<non_unicode> warnings category fatal; if you agree with Perl's decision, you may wish to turn off this category. See L<perlunicode/Beyond Unicode code points> for more information. =item %s matches null string many times in regex; marked by S<<-- HERE> in m/%s/ (W regexp) The pattern you've specified would be an infinite loop if the regular expression engine didn't specifically check for that. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. See L<perlre>. =item Maximal count of pending signals (%u) exceeded (F) Perl aborted due to too high a number of signals pending. This usually indicates that your operating system tried to deliver signals too fast (with a very high priority), starving the perl process from resources it would need to reach a point where it can process signals safely. (See L<perlipc/"Deferred Signals (Safe Signals)">.) =item "%s" may clash with future reserved word (W) This warning may be due to running a perl5 script through a perl4 interpreter, especially if the word that is being warned about is "use" or "my". =item '%' may not be used in pack (F) You can't pack a string by supplying a checksum, because the checksumming process loses information, and you can't go the other way. See L<perlfunc/unpack>. =item Method for operation %s not found in package %s during blessing (F) An attempt was made to specify an entry in an overloading table that doesn't resolve to a valid subroutine. See L<overload>. =item Method %s not permitted See L</500 Server error>. =item Might be a runaway multi-line %s string starting on line %d (S) An advisory indicating that the previous error may have been caused by a missing delimiter on a string or pattern, because it eventually ended earlier on the current line. =item Misplaced _ in number (W syntax) An underscore (underbar) in a numeric constant did not separate two digits. =item Missing argument for %n in %s (F) A C<%n> was used in a format string with no corresponding argument for perl to write the current string length to. =item Missing argument in %s (W missing) You called a function with fewer arguments than other arguments you supplied indicated would be needed. Currently only emitted when a printf-type format required more arguments than were supplied, but might be used in the future for other cases where we can statically determine that arguments to functions are missing, e.g. for the L<perlfunc/pack> function. =item Missing argument to -%c (F) The argument to the indicated command line switch must follow immediately after the switch, without intervening spaces. =item Missing braces on \N{} =item Missing braces on \N{} in regex; marked by S<<-- HERE> in m/%s/ (F) Wrong syntax of character name literal C<\N{charname}> within double-quotish context. This can also happen when there is a space (or comment) between the C<\N> and the C<{> in a regex with the C</x> modifier. This modifier does not change the requirement that the brace immediately follow the C<\N>. =item Missing braces on \o{} (F) A C<\o> must be followed immediately by a C<{> in double-quotish context. =item Missing comma after first argument to %s function (F) While certain functions allow you to specify a filehandle or an "indirect object" before the argument list, this ain't one of them. =item Missing command in piped open (W pipe) You used the C<open(FH, "| command")> or C<open(FH, "command |")> construction, but the command was missing or blank. =item Missing control char name in \c (F) A double-quoted string ended with "\c", without the required control character name. =item Missing ']' in prototype for %s : %s (W illegalproto) A grouping was started with C<[> but never closed with C<]>. =item Missing name in "%s sub" (F) The syntax for lexically scoped subroutines requires that they have a name with which they can be found. =item Missing $ on loop variable (F) Apparently you've been programming in B<csh> too much. Variables are always mentioned with the $ in Perl, unlike in the shells, where it can vary from one line to the next. =item (Missing operator before %s?) (S syntax) This is an educated guess made in conjunction with the message "%s found where operator expected". Often the missing operator is a comma. =item Missing or undefined argument to %s (F) You tried to call require or do with no argument or with an undefined value as an argument. Require expects either a package name or a file-specification as an argument; do expects a filename. See L<perlfunc/require EXPR> and L<perlfunc/do EXPR>. =item Missing right brace on \%c{} in regex; marked by S<<-- HERE> in m/%s/ (F) Missing right brace in C<\x{...}>, C<\p{...}>, C<\P{...}>, or C<\N{...}>. =item Missing right brace on \N{} =item Missing right brace on \N{} or unescaped left brace after \N (F) C<\N> has two meanings. The traditional one has it followed by a name enclosed in braces, meaning the character (or sequence of characters) given by that name. Thus C<\N{ASTERISK}> is another way of writing C<*>, valid in both double-quoted strings and regular expression patterns. In patterns, it doesn't have the meaning an unescaped C<*> does. Starting in Perl 5.12.0, C<\N> also can have an additional meaning (only) in patterns, namely to match a non-newline character. (This is short for C<[^\n]>, and like C<.> but is not affected by the C</s> regex modifier.) This can lead to some ambiguities. When C<\N> is not followed immediately by a left brace, Perl assumes the C<[^\n]> meaning. Also, if the braces form a valid quantifier such as C<\N{3}> or C<\N{5,}>, Perl assumes that this means to match the given quantity of non-newlines (in these examples, 3; and 5 or more, respectively). In all other case, where there is a C<\N{> and a matching C<}>, Perl assumes that a character name is desired. However, if there is no matching C<}>, Perl doesn't know if it was mistakenly omitted, or if C<[^\n]{> was desired, and raises this error. If you meant the former, add the right brace; if you meant the latter, escape the brace with a backslash, like so: C<\N\{> =item Missing right curly or square bracket (F) The lexer counted more opening curly or square brackets than closing ones. As a general rule, you'll find it's missing near the place you were last editing. =item (Missing semicolon on previous line?) (S syntax) This is an educated guess made in conjunction with the message "%s found where operator expected". Don't automatically put a semicolon on the previous line just because you saw this message. =item Modification of a read-only value attempted (F) You tried, directly or indirectly, to change the value of a constant. You didn't, of course, try "2 = 1", because the compiler catches that. But an easy way to do the same thing is: sub mod { $_[0] = 1 } mod(2); Another way is to assign to a substr() that's off the end of the string. Yet another way is to assign to a C<foreach> loop I<VAR> when I<VAR> is aliased to a constant in the look I<LIST>: $x = 1; foreach my $n ($x, 2) { $n *= 2; # modifies the $x, but fails on attempt to } # modify the 2 =item Modification of non-creatable array value attempted, %s (F) You tried to make an array value spring into existence, and the subscript was probably negative, even counting from end of the array backwards. =item Modification of non-creatable hash value attempted, %s (P) You tried to make a hash value spring into existence, and it couldn't be created for some peculiar reason. =item Module name must be constant (F) Only a bare module name is allowed as the first argument to a "use". =item Module name required with -%c option (F) The C<-M> or C<-m> options say that Perl should load some module, but you omitted the name of the module. Consult L<perlrun|perlrun/-m[-]module> for full details about C<-M> and C<-m>. =item More than one argument to '%s' open (F) The C<open> function has been asked to open multiple files. This can happen if you are trying to open a pipe to a command that takes a list of arguments, but have forgotten to specify a piped open mode. See L<perlfunc/open> for details. =item mprotect for COW string %p %u failed with %d (S) You compiled perl with B<-D>PERL_DEBUG_READONLY_COW (see L<perlguts/"Copy on Write">), but a shared string buffer could not be made read-only. =item mprotect for %p %u failed with %d (S) You compiled perl with B<-D>PERL_DEBUG_READONLY_OPS (see L<perlhacktips>), but an op tree could not be made read-only. =item mprotect RW for COW string %p %u failed with %d (S) You compiled perl with B<-D>PERL_DEBUG_READONLY_COW (see L<perlguts/"Copy on Write">), but a read-only shared string buffer could not be made mutable. =item mprotect RW for %p %u failed with %d (S) You compiled perl with B<-D>PERL_DEBUG_READONLY_OPS (see L<perlhacktips>), but a read-only op tree could not be made mutable before freeing the ops. =item msg%s not implemented (F) You don't have System V message IPC on your system. =item Multidimensional syntax %s not supported (W syntax) Multidimensional arrays aren't written like C<$foo[1,2,3]>. They're written like C<$foo[1][2][3]>, as in C. =item Multiple slurpy parameters not allowed (F) In subroutine signatures, a slurpy parameter (C<@> or C<%>) must be the last parameter, and there must not be more than one of them; for example: sub foo ($a, @b) {} # legal sub foo ($a, @b, %) {} # invalid =item '/' must follow a numeric type in unpack (F) You had an unpack template that contained a '/', but this did not follow some unpack specification producing a numeric value. See L<perlfunc/pack>. =item %s must not be a named sequence in transliteration operator (F) Transliteration (C<tr///> and C<y///>) transliterates individual characters. But a named sequence by definition is more than an individual character, and hence doing this operation on it doesn't make sense. =item "my sub" not yet implemented (F) Lexically scoped subroutines are not yet implemented. Don't try that yet. =item "my" subroutine %s can't be in a package (F) Lexically scoped subroutines aren't in a package, so it doesn't make sense to try to declare one with a package qualifier on the front. =item "my %s" used in sort comparison (W syntax) The package variables $a and $b are used for sort comparisons. You used $a or $b in as an operand to the C<< <=> >> or C<cmp> operator inside a sort comparison block, and the variable had earlier been declared as a lexical variable. Either qualify the sort variable with the package name, or rename the lexical variable. =item "my" variable %s can't be in a package (F) Lexically scoped variables aren't in a package, so it doesn't make sense to try to declare one with a package qualifier on the front. Use local() if you want to localize a package variable. =item Name "%s::%s" used only once: possible typo (W once) Typographical errors often show up as unique variable names. If you had a good reason for having a unique name, then just mention it again somehow to suppress the message. The C<our> declaration is also provided for this purpose. NOTE: This warning detects package symbols that have been used only once. This means lexical variables will never trigger this warning. It also means that all of the package variables $c, @c, %c, as well as *c, &c, sub c{}, c(), and c (the filehandle or format) are considered the same; if a program uses $c only once but also uses any of the others it will not trigger this warning. Symbols beginning with an underscore and symbols using special identifiers (q.v. L<perldata>) are exempt from this warning. =item Need exactly 3 octal digits in regex; marked by S<<-- HERE> in m/%s/ (F) Within S<C<(?[ ])>>, all constants interpreted as octal need to be exactly 3 digits long. This helps catch some ambiguities. If your constant is too short, add leading zeros, like (?[ [ \078 ] ]) # Syntax error! (?[ [ \0078 ] ]) # Works (?[ [ \007 8 ] ]) # Clearer The maximum number this construct can express is C<\777>. If you need a larger one, you need to use L<\o{}|perlrebackslash/Octal escapes> instead. If you meant two separate things, you need to separate them: (?[ [ \7776 ] ]) # Syntax error! (?[ [ \o{7776} ] ]) # One meaning (?[ [ \777 6 ] ]) # Another meaning (?[ [ \777 \006 ] ]) # Still another =item Negative '/' count in unpack (F) The length count obtained from a length/code unpack operation was negative. See L<perlfunc/pack>. =item Negative length (F) You tried to do a read/write/send/recv operation with a buffer length that is less than 0. This is difficult to imagine. =item Negative offset to vec in lvalue context (F) When C<vec> is called in an lvalue context, the second argument must be greater than or equal to zero. =item Negative repeat count does nothing (W numeric) You tried to execute the L<C<x>|perlop/Multiplicative Operators> repetition operator fewer than 0 times, which doesn't make sense. =item Nested quantifiers in regex; marked by S<<-- HERE> in m/%s/ (F) You can't quantify a quantifier without intervening parentheses. So things like ** or +* or ?* are illegal. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. Note that the minimal matching quantifiers, C<*?>, C<+?>, and C<??> appear to be nested quantifiers, but aren't. See L<perlre>. =item %s never introduced (S internal) The symbol in question was declared but somehow went out of scope before it could possibly have been used. =item next::method/next::can/maybe::next::method cannot find enclosing method (F) C<next::method> needs to be called within the context of a real method in a real package, and it could not find such a context. See L<mro>. =item \N in a character class must be a named character: \N{...} in regex; marked by S<<-- HERE> in m/%s/ (F) The new (as of Perl 5.12) meaning of C<\N> as C<[^\n]> is not valid in a bracketed character class, for the same reason that C<.> in a character class loses its specialness: it matches almost everything, which is probably not what you want. =item \N{} here is restricted to one character in regex; marked by <-- HERE in m/%s/ (F) Named Unicode character escapes (C<\N{...}>) may return a multi-character sequence. Even though a character class is supposed to match just one character of input, perl will match the whole thing correctly, except under certain conditions. These currently are =over 4 =item When the class is inverted (C<[^...]>) The mathematically logical behavior for what matches when inverting is very different from what people expect, so we have decided to forbid it. =item The escape is the beginning or final end point of a range Similarly unclear is what should be generated when the C<\N{...}> is used as one of the end points of the range, such as in [\x{41}-\N{ARABIC SEQUENCE YEH WITH HAMZA ABOVE WITH AE}] What is meant here is unclear, as the C<\N{...}> escape is a sequence of code points, so this is made an error. =item In a regex set The syntax S<C<(?[ ])>> in a regular expression yields a list of single code points, none can be a sequence. =back =item No %s allowed while running setuid (F) Certain operations are deemed to be too insecure for a setuid or setgid script to even be allowed to attempt. Generally speaking there will be another way to do what you want that is, if not secure, at least securable. See L<perlsec>. =item No code specified for -%c (F) Perl's B<-e> and B<-E> command-line options require an argument. If you want to run an empty program, pass the empty string as a separate argument or run a program consisting of a single 0 or 1: perl -e "" perl -e0 perl -e1 =item No comma allowed after %s (F) A list operator that has a filehandle or "indirect object" is not allowed to have a comma between that and the following arguments. Otherwise it'd be just another one of the arguments. One possible cause for this is that you expected to have imported a constant to your name space with B<use> or B<import> while no such importing took place, it may for example be that your operating system does not support that particular constant. Hopefully you did use an explicit import list for the constants you expect to see; please see L<perlfunc/use> and L<perlfunc/import>. While an explicit import list would probably have caught this error earlier it naturally does not remedy the fact that your operating system still does not support that constant. Maybe you have a typo in the constants of the symbol import list of B<use> or B<import> or in the constant name at the line where this error was triggered? =item No command into which to pipe on command line (F) An error peculiar to VMS. Perl handles its own command line redirection, and found a '|' at the end of the command line, so it doesn't know where you want to pipe the output from this command. =item No DB::DB routine defined (F) The currently executing code was compiled with the B<-d> switch, but for some reason the current debugger (e.g. F<perl5db.pl> or a C<Devel::> module) didn't define a routine to be called at the beginning of each statement. =item No dbm on this machine (P) This is counted as an internal error, because every machine should supply dbm nowadays, because Perl comes with SDBM. See L<SDBM_File>. =item No DB::sub routine defined (F) The currently executing code was compiled with the B<-d> switch, but for some reason the current debugger (e.g. F<perl5db.pl> or a C<Devel::> module) didn't define a C<DB::sub> routine to be called at the beginning of each ordinary subroutine call. =item No digits found for %s literal (F) No hexadecimal digits were found following C<0x> or no binary digits were found following C<0b>. =item No directory specified for -I (F) The B<-I> command-line switch requires a directory name as part of the I<same> argument. Use B<-Ilib>, for instance. B<-I lib> won't work. =item No error file after 2> or 2>> on command line (F) An error peculiar to VMS. Perl handles its own command line redirection, and found a '2>' or a '2>>' on the command line, but can't find the name of the file to which to write data destined for stderr. =item No group ending character '%c' found in template (F) A pack or unpack template has an opening '(' or '[' without its matching counterpart. See L<perlfunc/pack>. =item No input file after < on command line (F) An error peculiar to VMS. Perl handles its own command line redirection, and found a '<' on the command line, but can't find the name of the file from which to read data for stdin. =item No next::method '%s' found for %s (F) C<next::method> found no further instances of this method name in the remaining packages of the MRO of this class. If you don't want it throwing an exception, use C<maybe::next::method> or C<next::can>. See L<mro>. =item Non-finite repeat count does nothing (W numeric) You tried to execute the L<C<x>|perlop/Multiplicative Operators> repetition operator C<Inf> (or C<-Inf>) or C<NaN> times, which doesn't make sense. =item Non-hex character in regex; marked by S<<-- HERE> in m/%s/ (F) In a regular expression, there was a non-hexadecimal character where a hex one was expected, like (?[ [ \xDG ] ]) (?[ [ \x{DEKA} ] ]) =item Non-hex character '%c' terminates \x early. Resolved as "%s" (W digit) In parsing a hexadecimal numeric constant, a character was unexpectedly encountered that isn't hexadecimal. The resulting value is as indicated. Note that, within braces, every character starting with the first non-hexadecimal up to the ending brace is ignored. =item Non-octal character in regex; marked by S<<-- HERE> in m/%s/ (F) In a regular expression, there was a non-octal character where an octal one was expected, like (?[ [ \o{1278} ] ]) =item Non-octal character '%c' terminates \o early. Resolved as "%s" (W digit) In parsing an octal numeric constant, a character was unexpectedly encountered that isn't octal. The resulting value is as indicated. When not using C<\o{...}>, you wrote something like C<\08>, or C<\179> in a double-quotish string. The resolution is as indicated, with all but the last digit treated as a single character, specified in octal. The last digit is the next character in the string. To tell Perl that this is indeed what you want, you can use the C<\o{ }> syntax, or use exactly three digits to specify the octal for the character. Note that, within braces, every character starting with the first non-octal up to the ending brace is ignored. =item "no" not allowed in expression (F) The "no" keyword is recognized and executed at compile time, and returns no useful value. See L<perlmod>. =item Non-string passed as bitmask (W misc) A number has been passed as a bitmask argument to select(). Use the vec() function to construct the file descriptor bitmasks for select. See L<perlfunc/select>. =item No output file after > on command line (F) An error peculiar to VMS. Perl handles its own command line redirection, and found a lone '>' at the end of the command line, so it doesn't know where you wanted to redirect stdout. =item No output file after > or >> on command line (F) An error peculiar to VMS. Perl handles its own command line redirection, and found a '>' or a '>>' on the command line, but can't find the name of the file to which to write data destined for stdout. =item No package name allowed for subroutine %s in "our" =item No package name allowed for variable %s in "our" (F) Fully qualified subroutine and variable names are not allowed in "our" declarations, because that doesn't make much sense under existing rules. Such syntax is reserved for future extensions. =item No Perl script found in input (F) You called C<perl -x>, but no line was found in the file beginning with #! and containing the word "perl". =item No setregid available (F) Configure didn't find anything resembling the setregid() call for your system. =item No setreuid available (F) Configure didn't find anything resembling the setreuid() call for your system. =item No such class %s (F) You provided a class qualifier in a "my", "our" or "state" declaration, but this class doesn't exist at this point in your program. =item No such class field "%s" in variable %s of type %s (F) You tried to access a key from a hash through the indicated typed variable but that key is not allowed by the package of the same type. The indicated package has restricted the set of allowed keys using the L<fields> pragma. =item No such hook: %s (F) You specified a signal hook that was not recognized by Perl. Currently, Perl accepts C<__DIE__> and C<__WARN__> as valid signal hooks. =item No such pipe open (P) An error peculiar to VMS. The internal routine my_pclose() tried to close a pipe which hadn't been opened. This should have been caught earlier as an attempt to close an unopened filehandle. =item No such signal: SIG%s (W signal) You specified a signal name as a subscript to %SIG that was not recognized. Say C<kill -l> in your shell to see the valid signal names on your system. =item No Unicode property value wildcard matches: (W regexp) You specified a wildcard for a Unicode property value, but there is no property value in the current Unicode release that matches it. Check your spelling. =item Not a CODE reference (F) Perl was trying to evaluate a reference to a code value (that is, a subroutine), but found a reference to something else instead. You can use the ref() function to find out what kind of ref it really was. See also L<perlref>. =item Not a GLOB reference (F) Perl was trying to evaluate a reference to a "typeglob" (that is, a symbol table entry that looks like C<*foo>), but found a reference to something else instead. You can use the ref() function to find out what kind of ref it really was. See L<perlref>. =item Not a HASH reference (F) Perl was trying to evaluate a reference to a hash value, but found a reference to something else instead. You can use the ref() function to find out what kind of ref it really was. See L<perlref>. =item '#' not allowed immediately following a sigil in a subroutine signature (F) In a subroutine signature definition, a comment following a sigil (C<$>, C<@> or C<%>), needs to be separated by whitespace or a comma etc., in particular to avoid confusion with the C<$#> variable. For example: # bad sub f ($# ignore first arg , $b) {} # good sub f ($, # ignore first arg $b) {} =item Not an ARRAY reference (F) Perl was trying to evaluate a reference to an array value, but found a reference to something else instead. You can use the ref() function to find out what kind of ref it really was. See L<perlref>. =item Not a SCALAR reference (F) Perl was trying to evaluate a reference to a scalar value, but found a reference to something else instead. You can use the ref() function to find out what kind of ref it really was. See L<perlref>. =item Not a subroutine reference (F) Perl was trying to evaluate a reference to a code value (that is, a subroutine), but found a reference to something else instead. You can use the ref() function to find out what kind of ref it really was. See also L<perlref>. =item Not a subroutine reference in overload table (F) An attempt was made to specify an entry in an overloading table that doesn't somehow point to a valid subroutine. See L<overload>. =item Not enough arguments for %s (F) The function requires more arguments than you specified. =item Not enough format arguments (W syntax) A format specified more picture fields than the next line supplied. See L<perlform>. =item %s: not found (A) You've accidentally run your script through the Bourne shell instead of Perl. Check the #! line, or manually feed your script into Perl yourself. =item no UTC offset information; assuming local time is UTC (S) A warning peculiar to VMS. Perl was unable to find the local timezone offset, so it's assuming that local system time is equivalent to UTC. If it's not, define the logical name F<SYS$TIMEZONE_DIFFERENTIAL> to translate to the number of seconds which need to be added to UTC to get local time. =item NULL OP IN RUN (S debugging) Some internal routine called run() with a null opcode pointer. =item Null picture in formline (F) The first argument to formline must be a valid format picture specification. It was found to be empty, which probably means you supplied it an uninitialized value. See L<perlform>. =item Null realloc (P) An attempt was made to realloc NULL. =item NULL regexp argument (P) The internal pattern matching routines blew it big time. =item NULL regexp parameter (P) The internal pattern matching routines are out of their gourd. =item Number too long (F) Perl limits the representation of decimal numbers in programs to about 250 characters. You've exceeded that length. Future versions of Perl are likely to eliminate this arbitrary limitation. In the meantime, try using scientific notation (e.g. "1e6" instead of "1_000_000"). =item Number with no digits (F) Perl was looking for a number but found nothing that looked like a number. This happens, for example with C<\o{}>, with no number between the braces. =item Numeric format result too large (F) The length of the result of a numeric format supplied to sprintf() or printf() would have been too large for the underlying C function to report. This limit is typically 2GB. =item Numeric variables with more than one digit may not start with '0' (F) The only numeric variable which is allowed to start with a 0 is C<$0>, and you mentioned a variable that starts with 0 that has more than one digit. You probably want to remove the leading 0, or if the intent was to express a variable name in octal you should convert to decimal. =item Octal number > 037777777777 non-portable (W portable) The octal number you specified is larger than 2**32-1 (4294967295) and therefore non-portable between systems. See L<perlport> for more on portability concerns. =item Odd name/value argument for subroutine '%s' (F) A subroutine using a slurpy hash parameter in its signature received an odd number of arguments to populate the hash. It requires the arguments to be paired, with the same number of keys as values. The caller of the subroutine is presumably at fault. The message attempts to include the name of the called subroutine. If the subroutine has been aliased, the subroutine's original name will be shown, regardless of what name the caller used. =item Odd number of arguments for overload::constant (W overload) The call to overload::constant contained an odd number of arguments. The arguments should come in pairs. =item Odd number of elements in anonymous hash (W misc) You specified an odd number of elements to initialize a hash, which is odd, because hashes come in key/value pairs. =item Odd number of elements in hash assignment (W misc) You specified an odd number of elements to initialize a hash, which is odd, because hashes come in key/value pairs. =item Offset outside string (F)(W layer) You tried to do a read/write/send/recv/seek operation with an offset pointing outside the buffer. This is difficult to imagine. The sole exceptions to this are that zero padding will take place when going past the end of the string when either C<sysread()>ing a file, or when seeking past the end of a scalar opened for I/O (in anticipation of future reads and to imitate the behavior with real files). =item Old package separator used in string (W syntax) You used the old package separator, "'", in a variable named inside a double-quoted string; e.g., C<"In $name's house">. This is equivalent to C<"In $name::s house">. If you meant the former, put a backslash before the apostrophe (C<"In $name\'s house">). =item %s() on unopened %s (W unopened) An I/O operation was attempted on a filehandle that was never initialized. You need to do an open(), a sysopen(), or a socket() call, or call a constructor from the FileHandle package. =item -%s on unopened filehandle %s (W unopened) You tried to invoke a file test operator on a filehandle that isn't open. Check your control flow. See also L<perlfunc/-X>. =item oops: oopsAV (S internal) An internal warning that the grammar is screwed up. =item oops: oopsHV (S internal) An internal warning that the grammar is screwed up. =item Operand with no preceding operator in regex; marked by S<<-- HERE> in m/%s/ (F) You wrote something like (?[ \p{Digit} \p{Thai} ]) There are two operands, but no operator giving how you want to combine them. =item Operation "%s": no method found, %s (F) An attempt was made to perform an overloaded operation for which no handler was defined. While some handlers can be autogenerated in terms of other handlers, there is no default handler for any operation, unless the C<fallback> overloading key is specified to be true. See L<overload>. =item Operation "%s" returns its argument for non-Unicode code point 0x%X (S non_unicode) You performed an operation requiring Unicode rules on a code point that is not in Unicode, so what it should do is not defined. Perl has chosen to have it do nothing, and warn you. If the operation shown is "ToFold", it means that case-insensitive matching in a regular expression was done on the code point. If you know what you are doing you can turn off this warning by C<no warnings 'non_unicode';>. =item Operation "%s" returns its argument for UTF-16 surrogate U+%X (S surrogate) You performed an operation requiring Unicode rules on a Unicode surrogate. Unicode frowns upon the use of surrogates for anything but storing strings in UTF-16, but rules are (reluctantly) defined for the surrogates, and they are to do nothing for this operation. Because the use of surrogates can be dangerous, Perl warns. If the operation shown is "ToFold", it means that case-insensitive matching in a regular expression was done on the code point. If you know what you are doing you can turn off this warning by C<no warnings 'surrogate';>. =item Operator or semicolon missing before %s (S ambiguous) You used a variable or subroutine call where the parser was expecting an operator. The parser has assumed you really meant to use an operator, but this is highly likely to be incorrect. For example, if you say "*foo *foo" it will be interpreted as if you said "*foo * 'foo'". =item Optional parameter lacks default expression (F) In a subroutine signature, you wrote something like "$a =", making a named optional parameter without a default value. A nameless optional parameter is permitted to have no default value, but a named one must have a specific default. You probably want "$a = undef". =item "our" variable %s redeclared (W shadow) You seem to have already declared the same global once before in the current lexical scope. =item Out of memory! (X) The malloc() function returned 0, indicating there was insufficient remaining memory (or virtual memory) to satisfy the request. Perl has no option but to exit immediately. At least in Unix you may be able to get past this by increasing your process datasize limits: in csh/tcsh use C<limit> and C<limit datasize n> (where C<n> is the number of kilobytes) to check the current limits and change them, and in ksh/bash/zsh use C<ulimit -a> and C<ulimit -d n>, respectively. =item Out of memory during %s extend (X) An attempt was made to extend an array, a list, or a string beyond the largest possible memory allocation. =item Out of memory during "large" request for %s (F) The malloc() function returned 0, indicating there was insufficient remaining memory (or virtual memory) to satisfy the request. However, the request was judged large enough (compile-time default is 64K), so a possibility to shut down by trapping this error is granted. =item Out of memory during request for %s (X)(F) The malloc() function returned 0, indicating there was insufficient remaining memory (or virtual memory) to satisfy the request. The request was judged to be small, so the possibility to trap it depends on the way perl was compiled. By default it is not trappable. However, if compiled for this, Perl may use the contents of C<$^M> as an emergency pool after die()ing with this message. In this case the error is trappable I<once>, and the error message will include the line and file where the failed request happened. =item Out of memory during ridiculously large request (F) You can't allocate more than 2^31+"small amount" bytes. This error is most likely to be caused by a typo in the Perl program. e.g., C<$arr[time]> instead of C<$arr[$time]>. =item Out of memory for yacc stack (F) The yacc parser wanted to grow its stack so it could continue parsing, but realloc() wouldn't give it more memory, virtual or otherwise. =item '.' outside of string in pack (F) The argument to a '.' in your template tried to move the working position to before the start of the packed string being built. =item '@' outside of string in unpack (F) You had a template that specified an absolute position outside the string being unpacked. See L<perlfunc/pack>. =item '@' outside of string with malformed UTF-8 in unpack (F) You had a template that specified an absolute position outside the string being unpacked. The string being unpacked was also invalid UTF-8. See L<perlfunc/pack>. =item overload arg '%s' is invalid (W overload) The L<overload> pragma was passed an argument it did not recognize. Did you mistype an operator? =item Overloaded dereference did not return a reference (F) An object with an overloaded dereference operator was dereferenced, but the overloaded operation did not return a reference. See L<overload>. =item Overloaded qr did not return a REGEXP (F) An object with a C<qr> overload was used as part of a match, but the overloaded operation didn't return a compiled regexp. See L<overload>. =item %s package attribute may clash with future reserved word: %s (W reserved) A lowercase attribute name was used that had a package-specific handler. That name might have a meaning to Perl itself some day, even though it doesn't yet. Perhaps you should use a mixed-case attribute name, instead. See L<attributes>. =item pack/unpack repeat count overflow (F) You can't specify a repeat count so large that it overflows your signed integers. See L<perlfunc/pack>. =item page overflow (W io) A single call to write() produced more lines than can fit on a page. See L<perlform>. =item panic: %s (P) An internal error. =item panic: attempt to call %s in %s (P) One of the file test operators entered a code branch that calls an ACL related-function, but that function is not available on this platform. Earlier checks mean that it should not be possible to enter this branch on this platform. =item panic: child pseudo-process was never scheduled (P) A child pseudo-process in the ithreads implementation on Windows was not scheduled within the time period allowed and therefore was not able to initialize properly. =item panic: ck_grep, type=%u (P) Failed an internal consistency check trying to compile a grep. =item panic: corrupt saved stack index %ld (P) The savestack was requested to restore more localized values than there are in the savestack. =item panic: del_backref (P) Failed an internal consistency check while trying to reset a weak reference. =item panic: do_subst (P) The internal pp_subst() routine was called with invalid operational data. =item panic: do_trans_%s (P) The internal do_trans routines were called with invalid operational data. =item panic: fold_constants JMPENV_PUSH returned %d (P) While attempting folding constants an exception other than an C<eval> failure was caught. =item panic: frexp: %f (P) The library function frexp() failed, making printf("%f") impossible. =item panic: goto, type=%u, ix=%ld (P) We popped the context stack to a context with the specified label, and then discovered it wasn't a context we know how to do a goto in. =item panic: gp_free failed to free glob pointer (P) The internal routine used to clear a typeglob's entries tried repeatedly, but each time something re-created entries in the glob. Most likely the glob contains an object with a reference back to the glob and a destructor that adds a new object to the glob. =item panic: INTERPCASEMOD, %s (P) The lexer got into a bad state at a case modifier. =item panic: INTERPCONCAT, %s (P) The lexer got into a bad state parsing a string with brackets. =item panic: kid popen errno read (F) A forked child returned an incomprehensible message about its errno. =item panic: last, type=%u (P) We popped the context stack to a block context, and then discovered it wasn't a block context. =item panic: leave_scope clearsv (P) A writable lexical variable became read-only somehow within the scope. =item panic: leave_scope inconsistency %u (P) The savestack probably got out of sync. At least, there was an invalid enum on the top of it. =item panic: magic_killbackrefs (P) Failed an internal consistency check while trying to reset all weak references to an object. =item panic: malloc, %s (P) Something requested a negative number of bytes of malloc. =item panic: memory wrap (P) Something tried to allocate either more memory than possible or a negative amount. =item panic: pad_alloc, %p!=%p (P) The compiler got confused about which scratch pad it was allocating and freeing temporaries and lexicals from. =item panic: pad_free curpad, %p!=%p (P) The compiler got confused about which scratch pad it was allocating and freeing temporaries and lexicals from. =item panic: pad_free po (P) A zero scratch pad offset was detected internally. An attempt was made to free a target that had not been allocated to begin with. =item panic: pad_reset curpad, %p!=%p (P) The compiler got confused about which scratch pad it was allocating and freeing temporaries and lexicals from. =item panic: pad_sv po (P) A zero scratch pad offset was detected internally. Most likely an operator needed a target but that target had not been allocated for whatever reason. =item panic: pad_swipe curpad, %p!=%p (P) The compiler got confused about which scratch pad it was allocating and freeing temporaries and lexicals from. =item panic: pad_swipe po (P) An invalid scratch pad offset was detected internally. =item panic: pp_iter, type=%u (P) The foreach iterator got called in a non-loop context frame. =item panic: pp_match%s (P) The internal pp_match() routine was called with invalid operational data. =item panic: realloc, %s (P) Something requested a negative number of bytes of realloc. =item panic: reference miscount on nsv in sv_replace() (%d != 1) (P) The internal sv_replace() function was handed a new SV with a reference count other than 1. =item panic: restartop in %s (P) Some internal routine requested a goto (or something like it), and didn't supply the destination. =item panic: return, type=%u (P) We popped the context stack to a subroutine or eval context, and then discovered it wasn't a subroutine or eval context. =item panic: scan_num, %s (P) scan_num() got called on something that wasn't a number. =item panic: Sequence (?{...}): no code block found in regex m/%s/ (P) While compiling a pattern that has embedded (?{}) or (??{}) code blocks, perl couldn't locate the code block that should have already been seen and compiled by perl before control passed to the regex compiler. =item panic: strxfrm() gets absurd - a => %u, ab => %u (P) The interpreter's sanity check of the C function strxfrm() failed. In your current locale the returned transformation of the string "ab" is shorter than that of the string "a", which makes no sense. =item panic: sv_chop %s (P) The sv_chop() routine was passed a position that is not within the scalar's string buffer. =item panic: sv_insert, midend=%p, bigend=%p (P) The sv_insert() routine was told to remove more string than there was string. =item panic: top_env (P) The compiler attempted to do a goto, or something weird like that. =item panic: unimplemented op %s (#%d) called (P) The compiler is screwed up and attempted to use an op that isn't permitted at run time. =item panic: unknown OA_*: %x (P) The internal routine that handles arguments to C<&CORE::foo()> subroutine calls was unable to determine what type of arguments were expected. =item panic: utf16_to_utf8: odd bytelen (P) Something tried to call utf16_to_utf8 with an odd (as opposed to even) byte length. =item panic: utf16_to_utf8_reversed: odd bytelen (P) Something tried to call utf16_to_utf8_reversed with an odd (as opposed to even) byte length. =item panic: yylex, %s (P) The lexer got into a bad state while processing a case modifier. =item Parentheses missing around "%s" list (W parenthesis) You said something like my $foo, $bar = @_; when you meant my ($foo, $bar) = @_; Remember that "my", "our", "local" and "state" bind tighter than comma. =item Parsing code internal error (%s) (F) Parsing code supplied by an extension violated the parser's API in a detectable way. =item Pattern subroutine nesting without pos change exceeded limit in regex (F) You used a pattern that uses too many nested subpattern calls without consuming any text. Restructure the pattern so text is consumed before the nesting limit is exceeded. =item C<-p> destination: %s (F) An error occurred during the implicit output invoked by the C<-p> command-line switch. (This output goes to STDOUT unless you've redirected it with select().) =item Perl API version %s of %s does not match %s (F) The XS module in question was compiled against a different incompatible version of Perl than the one that has loaded the XS module. =item Perl folding rules are not up-to-date for 0x%X; please use the perlbug utility to report; in regex; marked by S<<-- HERE> in m/%s/ (S regexp) You used a regular expression with case-insensitive matching, and there is a bug in Perl in which the built-in regular expression folding rules are not accurate. This may lead to incorrect results. Please report this as a bug to L<https://github.com/Perl/perl5/issues>. =item PerlIO layer ':win32' is experimental (S experimental::win32_perlio) The C<:win32> PerlIO layer is experimental. If you want to take the risk of using this layer, simply disable this warning: no warnings "experimental::win32_perlio"; =item Perl_my_%s() not available (F) Your platform has very uncommon byte-order and integer size, so it was not possible to set up some or all fixed-width byte-order conversion functions. This is only a problem when you're using the '<' or '>' modifiers in (un)pack templates. See L<perlfunc/pack>. =item Perl %s required (did you mean %s?)--this is only %s, stopped (F) The code you are trying to run has asked for a newer version of Perl than you are running. Perhaps C<use 5.10> was written instead of C<use 5.010> or C<use v5.10>. Without the leading C<v>, the number is interpreted as a decimal, with every three digits after the decimal point representing a part of the version number. So 5.10 is equivalent to v5.100. =item Perl %s required--this is only %s, stopped (F) The module in question uses features of a version of Perl more recent than the currently running version. How long has it been since you upgraded, anyway? See L<perlfunc/require>. =item PERL_SH_DIR too long (F) An error peculiar to OS/2. PERL_SH_DIR is the directory to find the C<sh>-shell in. See "PERL_SH_DIR" in L<perlos2>. =item PERL_SIGNALS illegal: "%s" (X) See L<perlrun/PERL_SIGNALS> for legal values. =item Perls since %s too modern--this is %s, stopped (F) The code you are trying to run claims it will not run on the version of Perl you are using because it is too new. Maybe the code needs to be updated, or maybe it is simply wrong and the version check should just be removed. =item perl: warning: Non hex character in '$ENV{PERL_HASH_SEED}', seed only partially set (S) PERL_HASH_SEED should match /^\s*(?:0x)?[0-9a-fA-F]+\s*\z/ but it contained a non hex character. This could mean you are not using the hash seed you think you are. =item perl: warning: Setting locale failed. (S) The whole warning message will look something like: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LC_ALL = "En_US", LANG = (unset) are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). Exactly what were the failed locale settings varies. In the above the settings were that the LC_ALL was "En_US" and the LANG had no value. This error means that Perl detected that you and/or your operating system supplier and/or system administrator have set up the so-called locale system but Perl could not use those settings. This was not dead serious, fortunately: there is a "default locale" called "C" that Perl can and will use, and the script will be run. Before you really fix the problem, however, you will get the same error message each time you run Perl. How to really fix the problem can be found in L<perllocale> section B<LOCALE PROBLEMS>. =item perl: warning: strange setting in '$ENV{PERL_PERTURB_KEYS}': '%s' (S) Perl was run with the environment variable PERL_PERTURB_KEYS defined but containing an unexpected value. The legal values of this setting are as follows. Numeric | String | Result --------+---------------+----------------------------------------- 0 | NO | Disables key traversal randomization 1 | RANDOM | Enables full key traversal randomization 2 | DETERMINISTIC | Enables repeatable key traversal | | randomization Both numeric and string values are accepted, but note that string values are case sensitive. The default for this setting is "RANDOM" or 1. =item pid %x not a child (W exec) A warning peculiar to VMS. Waitpid() was asked to wait for a process which isn't a subprocess of the current process. While this is fine from VMS' perspective, it's probably not what you intended. =item 'P' must have an explicit size in unpack (F) The unpack format P must have an explicit size, not "*". =item POSIX class [:%s:] unknown in regex; marked by S<<-- HERE> in m/%s/ (F) The class in the character class [: :] syntax is unknown. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. Note that the POSIX character classes do B<not> have the C<is> prefix the corresponding C interfaces have: in other words, it's C<[[:print:]]>, not C<isprint>. See L<perlre>. =item POSIX getpgrp can't take an argument (F) Your system has POSIX getpgrp(), which takes no argument, unlike the BSD version, which takes a pid. =item POSIX syntax [%c %c] belongs inside character classes%s in regex; marked by S<<-- HERE> in m/%s/ (W regexp) Perl thinks that you intended to write a POSIX character class, but didn't use enough brackets. These POSIX class constructs [: :], [= =], and [. .] go I<inside> character classes, the [] are part of the construct, for example: C<qr/[012[:alpha:]345]/>. What the regular expression pattern compiled to is probably not what you were intending. For example, C<qr/[:alpha:]/> compiles to a regular bracketed character class consisting of the four characters C<":">, C<"a">, C<"l">, C<"h">, and C<"p">. To specify the POSIX class, it should have been written C<qr/[[:alpha:]]/>. Note that [= =] and [. .] are not currently implemented; they are simply placeholders for future extensions and will cause fatal errors. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. See L<perlre>. If the specification of the class was not completely valid, the message indicates that. =item POSIX syntax [. .] is reserved for future extensions in regex; marked by S<<-- HERE> in m/%s/ (F) Within regular expression character classes ([]) the syntax beginning with "[." and ending with ".]" is reserved for future extensions. If you need to represent those character sequences inside a regular expression character class, just quote the square brackets with the backslash: "\[." and ".\]". The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. See L<perlre>. =item POSIX syntax [= =] is reserved for future extensions in regex; marked by S<<-- HERE> in m/%s/ (F) Within regular expression character classes ([]) the syntax beginning with "[=" and ending with "=]" is reserved for future extensions. If you need to represent those character sequences inside a regular expression character class, just quote the square brackets with the backslash: "\[=" and "=\]". The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. See L<perlre>. =item Possible attempt to put comments in qw() list (W qw) qw() lists contain items separated by whitespace; as with literal strings, comment characters are not ignored, but are instead treated as literal data. (You may have used different delimiters than the parentheses shown here; braces are also frequently used.) You probably wrote something like this: @list = qw( a # a comment b # another comment ); when you should have written this: @list = qw( a b ); If you really want comments, build your list the old-fashioned way, with quotes and commas: @list = ( 'a', # a comment 'b', # another comment ); =item Possible attempt to separate words with commas (W qw) qw() lists contain items separated by whitespace; therefore commas aren't needed to separate the items. (You may have used different delimiters than the parentheses shown here; braces are also frequently used.) You probably wrote something like this: qw! a, b, c !; which puts literal commas into some of the list items. Write it without commas if you don't want them to appear in your data: qw! a b c !; =item Possible memory corruption: %s overflowed 3rd argument (F) An ioctl() or fcntl() returned more than Perl was bargaining for. Perl guesses a reasonable buffer size, but puts a sentinel byte at the end of the buffer just in case. This sentinel byte got clobbered, and Perl assumes that memory is now corrupted. See L<perlfunc/ioctl>. =item Possible precedence issue with control flow operator (W syntax) There is a possible problem with the mixing of a control flow operator (e.g. C<return>) and a low-precedence operator like C<or>. Consider: sub { return $a or $b; } This is parsed as: sub { (return $a) or $b; } Which is effectively just: sub { return $a; } Either use parentheses or the high-precedence variant of the operator. Note this may be also triggered for constructs like: sub { 1 if die; } =item Possible precedence problem on bitwise %s operator (W precedence) Your program uses a bitwise logical operator in conjunction with a numeric comparison operator, like this : if ($x & $y == 0) { ... } This expression is actually equivalent to C<$x & ($y == 0)>, due to the higher precedence of C<==>. This is probably not what you want. (If you really meant to write this, disable the warning, or, better, put the parentheses explicitly and write C<$x & ($y == 0)>). =item Possible unintended interpolation of $\ in regex (W ambiguous) You said something like C<m/$\/> in a regex. The regex C<m/foo$\s+bar/m> translates to: match the word 'foo', the output record separator (see L<perlvar/$\>) and the letter 's' (one time or more) followed by the word 'bar'. If this is what you intended then you can silence the warning by using C<m/${\}/> (for example: C<m/foo${\}s+bar/>). If instead you intended to match the word 'foo' at the end of the line followed by whitespace and the word 'bar' on the next line then you can use C<m/$(?)\/> (for example: C<m/foo$(?)\s+bar/>). =item Possible unintended interpolation of %s in string (W ambiguous) You said something like '@foo' in a double-quoted string but there was no array C<@foo> in scope at the time. If you wanted a literal @foo, then write it as \@foo; otherwise find out what happened to the array you apparently lost track of. =item Precedence problem: open %s should be open(%s) (S precedence) The old irregular construct open FOO || die; is now misinterpreted as open(FOO || die); because of the strict regularization of Perl 5's grammar into unary and list operators. (The old open was a little of both.) You must put parentheses around the filehandle, or use the new "or" operator instead of "||". =item Premature end of script headers See L</500 Server error>. =item printf() on closed filehandle %s (W closed) The filehandle you're writing to got itself closed sometime before now. Check your control flow. =item print() on closed filehandle %s (W closed) The filehandle you're printing on got itself closed sometime before now. Check your control flow. =item Process terminated by SIG%s (W) This is a standard message issued by OS/2 applications, while *nix applications die in silence. It is considered a feature of the OS/2 port. One can easily disable this by appropriate sighandlers, see L<perlipc/"Signals">. See also "Process terminated by SIGTERM/SIGINT" in L<perlos2>. =item Prototype after '%c' for %s : %s (W illegalproto) A character follows % or @ in a prototype. This is useless, since % and @ gobble the rest of the subroutine arguments. =item Prototype mismatch: %s vs %s (S prototype) The subroutine being declared or defined had previously been declared or defined with a different function prototype. =item Prototype not terminated (F) You've omitted the closing parenthesis in a function prototype definition. =item Prototype '%s' overridden by attribute 'prototype(%s)' in %s (W prototype) A prototype was declared in both the parentheses after the sub name and via the prototype attribute. The prototype in parentheses is useless, since it will be replaced by the prototype from the attribute before it's ever used. =item Quantifier follows nothing in regex; marked by S<<-- HERE> in m/%s/ (F) You started a regular expression with a quantifier. Backslash it if you meant it literally. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. See L<perlre>. =item Quantifier in {,} bigger than %d in regex; marked by S<<-- HERE> in m/%s/ (F) There is currently a limit to the size of the min and max values of the {min,max} construct. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. See L<perlre>. =item Quantifier {n,m} with n > m can't match in regex =item Quantifier {n,m} with n > m can't match in regex; marked by S<<-- HERE> in m/%s/ (W regexp) Minima should be less than or equal to maxima. If you really want your regexp to match something 0 times, just put {0}. =item Quantifier unexpected on zero-length expression in regex m/%s/ (W regexp) You applied a regular expression quantifier in a place where it makes no sense, such as on a zero-width assertion. Try putting the quantifier inside the assertion instead. For example, the way to match "abc" provided that it is followed by three repetitions of "xyz" is C</abc(?=(?:xyz){3})/>, not C</abc(?=xyz){3}/>. =item Range iterator outside integer range (F) One (or both) of the numeric arguments to the range operator ".." are outside the range which can be represented by integers internally. One possible workaround is to force Perl to use magical string increment by prepending "0" to your numbers. =item Ranges of ASCII printables should be some subset of "0-9", "A-Z", or "a-z" in regex; marked by S<<-- HERE> in m/%s/ (W regexp) (only under C<S<use re 'strict'>> or within C<(?[...])>) Stricter rules help to find typos and other errors. Perhaps you didn't even intend a range here, if the C<"-"> was meant to be some other character, or should have been escaped (like C<"\-">). If you did intend a range, the one that was used is not portable between ASCII and EBCDIC platforms, and doesn't have an obvious meaning to a casual reader. [3-7] # OK; Obvious and portable [d-g] # OK; Obvious and portable [A-Y] # OK; Obvious and portable [A-z] # WRONG; Not portable; not clear what is meant [a-Z] # WRONG; Not portable; not clear what is meant [%-.] # WRONG; Not portable; not clear what is meant [\x41-Z] # WRONG; Not portable; not obvious to non-geek (You can force portability by specifying a Unicode range, which means that the endpoints are specified by L<C<\N{...}>|perlrecharclass/Character Ranges>, but the meaning may still not be obvious.) The stricter rules require that ranges that start or stop with an ASCII character that is not a control have all their endpoints be the literal character, and not some escape sequence (like C<"\x41">), and the ranges must be all digits, or all uppercase letters, or all lowercase letters. =item Ranges of digits should be from the same group in regex; marked by S<<-- HERE> in m/%s/ (W regexp) (only under C<S<use re 'strict'>> or within C<(?[...])>) Stricter rules help to find typos and other errors. You included a range, and at least one of the end points is a decimal digit. Under the stricter rules, when this happens, both end points should be digits in the same group of 10 consecutive digits. =item readdir() attempted on invalid dirhandle %s (W io) The dirhandle you're reading from is either closed or not really a dirhandle. Check your control flow. =item readline() on closed filehandle %s (W closed) The filehandle you're reading from got itself closed sometime before now. Check your control flow. =item read() on closed filehandle %s (W closed) You tried to read from a closed filehandle. =item read() on unopened filehandle %s (W unopened) You tried to read from a filehandle that was never opened. =item Reallocation too large: %x (F) You can't allocate more than 64K on an MS-DOS machine. =item realloc() of freed memory ignored (S malloc) An internal routine called realloc() on something that had already been freed. =item Recompile perl with B<-D>DEBUGGING to use B<-D> switch (S debugging) You can't use the B<-D> option unless the code to produce the desired output is compiled into Perl, which entails some overhead, which is why it's currently left out of your copy. =item Recursive call to Perl_load_module in PerlIO_find_layer (P) It is currently not permitted to load modules when creating a filehandle inside an %INC hook. This can happen with C<open my $fh, '<', \$scalar>, which implicitly loads PerlIO::scalar. Try loading PerlIO::scalar explicitly first. =item Recursive inheritance detected in package '%s' (F) While calculating the method resolution order (MRO) of a package, Perl believes it found an infinite loop in the C<@ISA> hierarchy. This is a crude check that bails out after 100 levels of C<@ISA> depth. =item Redundant argument in %s (W redundant) You called a function with more arguments than other arguments you supplied indicated would be needed. Currently only emitted when a printf-type format required fewer arguments than were supplied, but might be used in the future for e.g. L<perlfunc/pack>. =item refcnt_dec: fd %d%s =item refcnt: fd %d%s =item refcnt_inc: fd %d%s (P) Perl's I/O implementation failed an internal consistency check. If you see this message, something is very wrong. =item Reference found where even-sized list expected (W misc) You gave a single reference where Perl was expecting a list with an even number of elements (for assignment to a hash). This usually means that you used the anon hash constructor when you meant to use parens. In any case, a hash requires key/value B<pairs>. %hash = { one => 1, two => 2, }; # WRONG %hash = [ qw/ an anon array / ]; # WRONG %hash = ( one => 1, two => 2, ); # right %hash = qw( one 1 two 2 ); # also fine =item Reference is already weak (W misc) You have attempted to weaken a reference that is already weak. Doing so has no effect. =item Reference is not weak (W misc) You have attempted to unweaken a reference that is not weak. Doing so has no effect. =item Reference to invalid group 0 in regex; marked by S<<-- HERE> in m/%s/ (F) You used C<\g0> or similar in a regular expression. You may refer to capturing parentheses only with strictly positive integers (normal backreferences) or with strictly negative integers (relative backreferences). Using 0 does not make sense. =item Reference to nonexistent group in regex; marked by S<<-- HERE> in m/%s/ (F) You used something like C<\7> in your regular expression, but there are not at least seven sets of capturing parentheses in the expression. If you wanted to have the character with ordinal 7 inserted into the regular expression, prepend zeroes to make it three digits long: C<\007> The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. =item Reference to nonexistent named group in regex; marked by S<<-- HERE> in m/%s/ (F) You used something like C<\k'NAME'> or C<< \k<NAME> >> in your regular expression, but there is no corresponding named capturing parentheses such as C<(?'NAME'...)> or C<< (?<NAME>...) >>. Check if the name has been spelled correctly both in the backreference and the declaration. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. =item Reference to nonexistent or unclosed group in regex; marked by S<<-- HERE> in m/%s/ (F) You used something like C<\g{-7}> in your regular expression, but there are not at least seven sets of closed capturing parentheses in the expression before where the C<\g{-7}> was located. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. =item regexp memory corruption (P) The regular expression engine got confused by what the regular expression compiler gave it. =item Regexp modifier "/%c" may appear a maximum of twice =item Regexp modifier "%c" may appear a maximum of twice in regex; marked by S<<-- HERE> in m/%s/ (F) The regular expression pattern had too many occurrences of the specified modifier. Remove the extraneous ones. =item Regexp modifier "%c" may not appear after the "-" in regex; marked by <-- HERE in m/%s/ (F) Turning off the given modifier has the side effect of turning on another one. Perl currently doesn't allow this. Reword the regular expression to use the modifier you want to turn on (and place it before the minus), instead of the one you want to turn off. =item Regexp modifier "/%c" may not appear twice =item Regexp modifier "%c" may not appear twice in regex; marked by <-- HERE in m/%s/ (F) The regular expression pattern had too many occurrences of the specified modifier. Remove the extraneous ones. =item Regexp modifiers "/%c" and "/%c" are mutually exclusive =item Regexp modifiers "%c" and "%c" are mutually exclusive in regex; marked by S<<-- HERE> in m/%s/ (F) The regular expression pattern had more than one of these mutually exclusive modifiers. Retain only the modifier that is supposed to be there. =item Regexp out of space in regex m/%s/ (P) A "can't happen" error, because safemalloc() should have caught it earlier. =item Repeated format line will never terminate (~~ and @#) (F) Your format contains the ~~ repeat-until-blank sequence and a numeric field that will never go blank so that the repetition never terminates. You might use ^# instead. See L<perlform>. =item Replacement list is longer than search list (W misc) You have used a replacement list that is longer than the search list. So the additional elements in the replacement list are meaningless. =item '(*%s' requires a terminating ':' in regex; marked by <-- HERE in m/%s/ (F) You used a construct that needs a colon and pattern argument. Supply these or check that you are using the right construct. =item '%s' resolved to '\o{%s}%d' As of Perl 5.32, this message is no longer generated. Instead, see L</Non-octal character '%c' terminates \o early. Resolved as "%s">. (W misc, regexp) You wrote something like C<\08>, or C<\179> in a double-quotish string. All but the last digit is treated as a single character, specified in octal. The last digit is the next character in the string. To tell Perl that this is indeed what you want, you can use the C<\o{ }> syntax, or use exactly three digits to specify the octal for the character. =item Reversed %s= operator (W syntax) You wrote your assignment operator backwards. The = must always come last, to avoid ambiguity with subsequent unary operators. =item rewinddir() attempted on invalid dirhandle %s (W io) The dirhandle you tried to do a rewinddir() on is either closed or not really a dirhandle. Check your control flow. =item Scalars leaked: %d (S internal) Something went wrong in Perl's internal bookkeeping of scalars: not all scalar variables were deallocated by the time Perl exited. What this usually indicates is a memory leak, which is of course bad, especially if the Perl program is intended to be long-running. =item Scalar value @%s[%s] better written as $%s[%s] (W syntax) You've used an array slice (indicated by @) to select a single element of an array. Generally it's better to ask for a scalar value (indicated by $). The difference is that C<$foo[&bar]> always behaves like a scalar, both when assigning to it and when evaluating its argument, while C<@foo[&bar]> behaves like a list when you assign to it, and provides a list context to its subscript, which can do weird things if you're expecting only one subscript. On the other hand, if you were actually hoping to treat the array element as a list, you need to look into how references work, because Perl will not magically convert between scalars and lists for you. See L<perlref>. =item Scalar value @%s{%s} better written as $%s{%s} (W syntax) You've used a hash slice (indicated by @) to select a single element of a hash. Generally it's better to ask for a scalar value (indicated by $). The difference is that C<$foo{&bar}> always behaves like a scalar, both when assigning to it and when evaluating its argument, while C<@foo{&bar}> behaves like a list when you assign to it, and provides a list context to its subscript, which can do weird things if you're expecting only one subscript. On the other hand, if you were actually hoping to treat the hash element as a list, you need to look into how references work, because Perl will not magically convert between scalars and lists for you. See L<perlref>. =item Search pattern not terminated (F) The lexer couldn't find the final delimiter of a // or m{} construct. Remember that bracketing delimiters count nesting level. Missing the leading C<$> from a variable C<$m> may cause this error. Note that since Perl 5.10.0 a // can also be the I<defined-or> construct, not just the empty search pattern. Therefore code written in Perl 5.10.0 or later that uses the // as the I<defined-or> can be misparsed by pre-5.10.0 Perls as a non-terminated search pattern. =item seekdir() attempted on invalid dirhandle %s (W io) The dirhandle you are doing a seekdir() on is either closed or not really a dirhandle. Check your control flow. =item %sseek() on unopened filehandle (W unopened) You tried to use the seek() or sysseek() function on a filehandle that was either never opened or has since been closed. =item select not implemented (F) This machine doesn't implement the select() system call. =item Self-ties of arrays and hashes are not supported (F) Self-ties are of arrays and hashes are not supported in the current implementation. =item Semicolon seems to be missing (W semicolon) A nearby syntax error was probably caused by a missing semicolon, or possibly some other missing operator, such as a comma. =item semi-panic: attempt to dup freed string (S internal) The internal newSVsv() routine was called to duplicate a scalar that had previously been marked as free. =item sem%s not implemented (F) You don't have System V semaphore IPC on your system. =item send() on closed socket %s (W closed) The socket you're sending to got itself closed sometime before now. Check your control flow. =item Sequence "\c{" invalid (F) These three characters may not appear in sequence in a double-quotish context. This message is raised only on non-ASCII platforms (a different error message is output on ASCII ones). If you were intending to specify a control character with this sequence, you'll have to use a different way to specify it. =item Sequence (? incomplete in regex; marked by S<<-- HERE> in m/%s/ (F) A regular expression ended with an incomplete extension (?. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. See L<perlre>. =item Sequence (?%c...) not implemented in regex; marked by S<<-- HERE> in m/%s/ (F) A proposed regular expression extension has the character reserved but has not yet been written. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. See L<perlre>. =item Sequence (?%s...) not recognized in regex; marked by S<<-- HERE> in m/%s/ (F) You used a regular expression extension that doesn't make sense. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. This may happen when using the C<(?^...)> construct to tell Perl to use the default regular expression modifiers, and you redundantly specify a default modifier. For other causes, see L<perlre>. =item Sequence (?#... not terminated in regex m/%s/ (F) A regular expression comment must be terminated by a closing parenthesis. Embedded parentheses aren't allowed. See L<perlre>. =item Sequence (?&... not terminated in regex; marked by S<<-- HERE> in m/%s/ (F) A named reference of the form C<(?&...)> was missing the final closing parenthesis after the name. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. =item Sequence (?%c... not terminated in regex; marked by S<<-- HERE> in m/%s/ (F) A named group of the form C<(?'...')> or C<< (?<...>) >> was missing the final closing quote or angle bracket. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. =item Sequence (?(%c... not terminated in regex; marked by S<<-- HERE> in m/%s/ (F) A named reference of the form C<(?('...')...)> or C<< (?(<...>)...) >> was missing the final closing quote or angle bracket after the name. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. =item Sequence (?... not terminated in regex; marked by S<<-- HERE> in m/%s/ (F) There was no matching closing parenthesis for the '('. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. =item Sequence \%s... not terminated in regex; marked by S<<-- HERE> in m/%s/ (F) The regular expression expects a mandatory argument following the escape sequence and this has been omitted or incorrectly written. =item Sequence (?{...}) not terminated with ')' (F) The end of the perl code contained within the {...} must be followed immediately by a ')'. =item Sequence (?PE<gt>... not terminated in regex; marked by S<<-- HERE> in m/%s/ (F) A named reference of the form C<(?PE<gt>...)> was missing the final closing parenthesis after the name. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. =item Sequence (?PE<lt>... not terminated in regex; marked by S<<-- HERE> in m/%s/ (F) A named group of the form C<(?PE<lt>...E<gt>')> was missing the final closing angle bracket. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. =item Sequence ?P=... not terminated in regex; marked by S<<-- HERE> in m/%s/ (F) A named reference of the form C<(?P=...)> was missing the final closing parenthesis after the name. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. =item Sequence (?R) not terminated in regex m/%s/ (F) An C<(?R)> or C<(?0)> sequence in a regular expression was missing the final parenthesis. =item Z<>500 Server error (A) This is the error message generally seen in a browser window when trying to run a CGI program (including SSI) over the web. The actual error text varies widely from server to server. The most frequently-seen variants are "500 Server error", "Method (something) not permitted", "Document contains no data", "Premature end of script headers", and "Did not produce a valid header". B<This is a CGI error, not a Perl error>. You need to make sure your script is executable, is accessible by the user CGI is running the script under (which is probably not the user account you tested it under), does not rely on any environment variables (like PATH) from the user it isn't running under, and isn't in a location where the CGI server can't find it, basically, more or less. Please see the following for more information: https://www.perl.org/CGI_MetaFAQ.html http://www.htmlhelp.org/faq/cgifaq.html http://www.w3.org/Security/Faq/ You should also look at L<perlfaq9>. =item setegid() not implemented (F) You tried to assign to C<$)>, and your operating system doesn't support the setegid() system call (or equivalent), or at least Configure didn't think so. =item seteuid() not implemented (F) You tried to assign to C<< $> >>, and your operating system doesn't support the seteuid() system call (or equivalent), or at least Configure didn't think so. =item setpgrp can't take arguments (F) Your system has the setpgrp() from BSD 4.2, which takes no arguments, unlike POSIX setpgid(), which takes a process ID and process group ID. =item setrgid() not implemented (F) You tried to assign to C<$(>, and your operating system doesn't support the setrgid() system call (or equivalent), or at least Configure didn't think so. =item setruid() not implemented (F) You tried to assign to C<$<>, and your operating system doesn't support the setruid() system call (or equivalent), or at least Configure didn't think so. =item setsockopt() on closed socket %s (W closed) You tried to set a socket option on a closed socket. Did you forget to check the return value of your socket() call? See L<perlfunc/setsockopt>. =item Setting $/ to a reference to %s is forbidden (F) You assigned a reference to a scalar to C<$/> where the referenced item is not a positive integer. In older perls this B<appeared> to work the same as setting it to C<undef> but was in fact internally different, less efficient and with very bad luck could have resulted in your file being split by a stringified form of the reference. In Perl 5.20.0 this was changed so that it would be B<exactly> the same as setting C<$/> to undef, with the exception that this warning would be thrown. You are recommended to change your code to set C<$/> to C<undef> explicitly if you wish to slurp the file. As of Perl 5.28 assigning C<$/> to a reference to an integer which isn't positive is a fatal error. =item Setting $/ to %s reference is forbidden (F) You tried to assign a reference to a non integer to C<$/>. In older Perls this would have behaved similarly to setting it to a reference to a positive integer, where the integer was the address of the reference. As of Perl 5.20.0 this is a fatal error, to allow future versions of Perl to use non-integer refs for more interesting purposes. =item shm%s not implemented (F) You don't have System V shared memory IPC on your system. =item !=~ should be !~ (W syntax) The non-matching operator is !~, not !=~. !=~ will be interpreted as the != (numeric not equal) and ~ (1's complement) operators: probably not what you intended. =item /%s/ should probably be written as "%s" (W syntax) You have used a pattern where Perl expected to find a string, as in the first argument to C<join>. Perl will treat the true or false result of matching the pattern against $_ as the string, which is probably not what you had in mind. =item shutdown() on closed socket %s (W closed) You tried to do a shutdown on a closed socket. Seems a bit superfluous. =item SIG%s handler "%s" not defined (W signal) The signal handler named in %SIG doesn't, in fact, exist. Perhaps you put it into the wrong package? =item Slab leaked from cv %p (S) If you see this message, then something is seriously wrong with the internal bookkeeping of op trees. An op tree needed to be freed after a compilation error, but could not be found, so it was leaked instead. =item sleep(%u) too large (W overflow) You called C<sleep> with a number that was larger than it can reliably handle and C<sleep> probably slept for less time than requested. =item Slurpy parameter not last (F) In a subroutine signature, you put something after a slurpy (array or hash) parameter. The slurpy parameter takes all the available arguments, so there can't be any left to fill later parameters. =item Smart matching a non-overloaded object breaks encapsulation (F) You should not use the C<~~> operator on an object that does not overload it: Perl refuses to use the object's underlying structure for the smart match. =item Smartmatch is experimental (S experimental::smartmatch) This warning is emitted if you use the smartmatch (C<~~>) operator. This is currently an experimental feature, and its details are subject to change in future releases of Perl. Particularly, its current behavior is noticed for being unnecessarily complex and unintuitive, and is very likely to be overhauled. =item Sorry, hash keys must be smaller than 2**31 bytes (F) You tried to create a hash containing a very large key, where "very large" means that it needs at least 2 gigabytes to store. Unfortunately, Perl doesn't yet handle such large hash keys. You should reconsider your design to avoid hashing such a long string directly. =item sort is now a reserved word (F) An ancient error message that almost nobody ever runs into anymore. But before sort was a keyword, people sometimes used it as a filehandle. =item Source filters apply only to byte streams (F) You tried to activate a source filter (usually by loading a source filter module) within a string passed to C<eval>. This is not permitted under the C<unicode_eval> feature. Consider using C<evalbytes> instead. See L<feature>. =item splice() offset past end of array (W misc) You attempted to specify an offset that was past the end of the array passed to splice(). Splicing will instead commence at the end of the array, rather than past it. If this isn't what you want, try explicitly pre-extending the array by assigning $#array = $offset. See L<perlfunc/splice>. =item Split loop (P) The split was looping infinitely. (Obviously, a split shouldn't iterate more times than there are characters of input, which is what happened.) See L<perlfunc/split>. =item Statement unlikely to be reached (W exec) You did an exec() with some statement after it other than a die(). This is almost always an error, because exec() never returns unless there was a failure. You probably wanted to use system() instead, which does return. To suppress this warning, put the exec() in a block by itself. =item "state" subroutine %s can't be in a package (F) Lexically scoped subroutines aren't in a package, so it doesn't make sense to try to declare one with a package qualifier on the front. =item "state %s" used in sort comparison (W syntax) The package variables $a and $b are used for sort comparisons. You used $a or $b in as an operand to the C<< <=> >> or C<cmp> operator inside a sort comparison block, and the variable had earlier been declared as a lexical variable. Either qualify the sort variable with the package name, or rename the lexical variable. =item "state" variable %s can't be in a package (F) Lexically scoped variables aren't in a package, so it doesn't make sense to try to declare one with a package qualifier on the front. Use local() if you want to localize a package variable. =item stat() on unopened filehandle %s (W unopened) You tried to use the stat() function on a filehandle that was either never opened or has since been closed. =item Strings with code points over 0xFF may not be mapped into in-memory file handles (W utf8) You tried to open a reference to a scalar for read or append where the scalar contained code points over 0xFF. In-memory files model on-disk files and can only contain bytes. =item Stub found while resolving method "%s" overloading "%s" in package "%s" (P) Overloading resolution over @ISA tree may be broken by importation stubs. Stubs should never be implicitly created, but explicit calls to C<can> may break this. =item Subroutine attributes must come before the signature (F) When subroutine signatures are enabled, any subroutine attributes must come before the signature. Note that this order was the opposite in versions 5.22..5.26. So: sub foo :lvalue ($a, $b) { ... } # 5.20 and 5.28 + sub foo ($a, $b) :lvalue { ... } # 5.22 .. 5.26 =item Subroutine "&%s" is not available (W closure) During compilation, an inner named subroutine or eval is attempting to capture an outer lexical subroutine that is not currently available. This can happen for one of two reasons. First, the lexical subroutine may be declared in an outer anonymous subroutine that has not yet been created. (Remember that named subs are created at compile time, while anonymous subs are created at run-time.) For example, sub { my sub a {...} sub f { \&a } } At the time that f is created, it can't capture the current "a" sub, since the anonymous subroutine hasn't been created yet. Conversely, the following won't give a warning since the anonymous subroutine has by now been created and is live: sub { my sub a {...} eval 'sub f { \&a }' }->(); The second situation is caused by an eval accessing a lexical subroutine that has gone out of scope, for example, sub f { my sub a {...} sub { eval '\&a' } } f()->(); Here, when the '\&a' in the eval is being compiled, f() is not currently being executed, so its &a is not available for capture. =item "%s" subroutine &%s masks earlier declaration in same %s (W shadow) A "my" or "state" subroutine has been redeclared in the current scope or statement, effectively eliminating all access to the previous instance. This is almost always a typographical error. Note that the earlier subroutine will still exist until the end of the scope or until all closure references to it are destroyed. =item Subroutine %s redefined (W redefine) You redefined a subroutine. To suppress this warning, say { no warnings 'redefine'; eval "sub name { ... }"; } =item Subroutine "%s" will not stay shared (W closure) An inner (nested) I<named> subroutine is referencing a "my" subroutine defined in an outer named subroutine. When the inner subroutine is called, it will see the value of the outer subroutine's lexical subroutine as it was before and during the *first* call to the outer subroutine; in this case, after the first call to the outer subroutine is complete, the inner and outer subroutines will no longer share a common value for the lexical subroutine. In other words, it will no longer be shared. This will especially make a difference if the lexical subroutines accesses lexical variables declared in its surrounding scope. This problem can usually be solved by making the inner subroutine anonymous, using the C<sub {}> syntax. When inner anonymous subs that reference lexical subroutines in outer subroutines are created, they are automatically rebound to the current values of such lexical subs. =item Substitution loop (P) The substitution was looping infinitely. (Obviously, a substitution shouldn't iterate more times than there are characters of input, which is what happened.) See the discussion of substitution in L<perlop/"Regexp Quote-Like Operators">. =item Substitution pattern not terminated (F) The lexer couldn't find the interior delimiter of an s/// or s{}{} construct. Remember that bracketing delimiters count nesting level. Missing the leading C<$> from variable C<$s> may cause this error. =item Substitution replacement not terminated (F) The lexer couldn't find the final delimiter of an s/// or s{}{} construct. Remember that bracketing delimiters count nesting level. Missing the leading C<$> from variable C<$s> may cause this error. =item substr outside of string (W substr)(F) You tried to reference a substr() that pointed outside of a string. That is, the absolute value of the offset was larger than the length of the string. See L<perlfunc/substr>. This warning is fatal if substr is used in an lvalue context (as the left hand side of an assignment or as a subroutine argument for example). =item sv_upgrade from type %d down to type %d (P) Perl tried to force the upgrade of an SV to a type which was actually inferior to its current type. =item Switch (?(condition)... contains too many branches in regex; marked by S<<-- HERE> in m/%s/ (F) A (?(condition)if-clause|else-clause) construct can have at most two branches (the if-clause and the else-clause). If you want one or both to contain alternation, such as using C<this|that|other>, enclose it in clustering parentheses: (?(condition)(?:this|that|other)|else-clause) The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. See L<perlre>. =item Switch condition not recognized in regex; marked by S<<-- HERE> in m/%s/ (F) The condition part of a (?(condition)if-clause|else-clause) construct is not known. The condition must be one of the following: (1) (2) ... true if 1st, 2nd, etc., capture matched (<NAME>) ('NAME') true if named capture matched (?=...) (?<=...) true if subpattern matches (?!...) (?<!...) true if subpattern fails to match (?{ CODE }) true if code returns a true value (R) true if evaluating inside recursion (R1) (R2) ... true if directly inside capture group 1, 2, etc. (R&NAME) true if directly inside named capture (DEFINE) always false; for defining named subpatterns The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. See L<perlre>. =item Switch (?(condition)... not terminated in regex; marked by S<<-- HERE> in m/%s/ (F) You omitted to close a (?(condition)...) block somewhere in the pattern. Add a closing parenthesis in the appropriate position. See L<perlre>. =item switching effective %s is not implemented (F) While under the C<use filetest> pragma, we cannot switch the real and effective uids or gids. =item syntax error (F) Probably means you had a syntax error. Common reasons include: A keyword is misspelled. A semicolon is missing. A comma is missing. An opening or closing parenthesis is missing. An opening or closing brace is missing. A closing quote is missing. Often there will be another error message associated with the syntax error giving more information. (Sometimes it helps to turn on B<-w>.) The error message itself often tells you where it was in the line when it decided to give up. Sometimes the actual error is several tokens before this, because Perl is good at understanding random input. Occasionally the line number may be misleading, and once in a blue moon the only way to figure out what's triggering the error is to call C<perl -c> repeatedly, chopping away half the program each time to see if the error went away. Sort of the cybernetic version of S<20 questions>. =item syntax error at line %d: '%s' unexpected (A) You've accidentally run your script through the Bourne shell instead of Perl. Check the #! line, or manually feed your script into Perl yourself. =item syntax error in file %s at line %d, next 2 tokens "%s" (F) This error is likely to occur if you run a perl5 script through a perl4 interpreter, especially if the next 2 tokens are "use strict" or "my $var" or "our $var". =item Syntax error in (?[...]) in regex; marked by <-- HERE in m/%s/ (F) Perl could not figure out what you meant inside this construct; this notifies you that it is giving up trying. =item %s syntax OK (F) The final summary message when a C<perl -c> succeeds. =item sysread() on closed filehandle %s (W closed) You tried to read from a closed filehandle. =item sysread() on unopened filehandle %s (W unopened) You tried to read from a filehandle that was never opened. =item System V %s is not implemented on this machine (F) You tried to do something with a function beginning with "sem", "shm", or "msg" but that System V IPC is not implemented in your machine. In some machines the functionality can exist but be unconfigured. Consult your system support. =item syswrite() on closed filehandle %s (W closed) The filehandle you're writing to got itself closed sometime before now. Check your control flow. =item C<-T> and C<-B> not implemented on filehandles (F) Perl can't peek at the stdio buffer of filehandles when it doesn't know about your kind of stdio. You'll have to use a filename instead. =item Target of goto is too deeply nested (F) You tried to use C<goto> to reach a label that was too deeply nested for Perl to reach. Perl is doing you a favor by refusing. =item telldir() attempted on invalid dirhandle %s (W io) The dirhandle you tried to telldir() is either closed or not really a dirhandle. Check your control flow. =item tell() on unopened filehandle (W unopened) You tried to use the tell() function on a filehandle that was either never opened or has since been closed. =item The crypt() function is unimplemented due to excessive paranoia. (F) Configure couldn't find the crypt() function on your machine, probably because your vendor didn't supply it, probably because they think the U.S. Government thinks it's a secret, or at least that they will continue to pretend that it is. And if you quote me on that, I will deny it. =item The experimental declared_refs feature is not enabled (F) To declare references to variables, as in C<my \%x>, you must first enable the feature: no warnings "experimental::declared_refs"; use feature "declared_refs"; =item The %s function is unimplemented (F) The function indicated isn't implemented on this architecture, according to the probings of Configure. =item The private_use feature is experimental (S experimental::private_use) This feature is actually a hook for future use. =item The regex_sets feature is experimental (S experimental::regex_sets) This warning is emitted if you use the syntax S<C<(?[ ])>> in a regular expression. The details of this feature are subject to change. If you want to use it, but know that in doing so you are taking the risk of using an experimental feature which may change in a future Perl version, you can do this to silence the warning: no warnings "experimental::regex_sets"; =item The signatures feature is experimental (S experimental::signatures) This warning is emitted if you unwrap a subroutine's arguments using a signature. Simply suppress the warning if you want to use the feature, but know that in doing so you are taking the risk of using an experimental feature which may change or be removed in a future Perl version: no warnings "experimental::signatures"; use feature "signatures"; sub foo ($left, $right) { ... } =item The stat preceding %s wasn't an lstat (F) It makes no sense to test the current stat buffer for symbolic linkhood if the last stat that wrote to the stat buffer already went past the symlink to get to the real file. Use an actual filename instead. =item The Unicode property wildcards feature is experimental (S experimental::uniprop_wildcards) This feature is experimental and its behavior may in any future release of perl. See L<perlunicode/Wildcards in Property Values>. =item The 'unique' attribute may only be applied to 'our' variables (F) This attribute was never supported on C<my> or C<sub> declarations. =item This Perl can't reset CRTL environ elements (%s) =item This Perl can't set CRTL environ elements (%s=%s) (W internal) Warnings peculiar to VMS. You tried to change or delete an element of the CRTL's internal environ array, but your copy of Perl wasn't built with a CRTL that contained the setenv() function. You'll need to rebuild Perl with a CRTL that does, or redefine F<PERL_ENV_TABLES> (see L<perlvms>) so that the environ array isn't the target of the change to %ENV which produced the warning. =item This Perl has not been built with support for randomized hash key traversal but something called Perl_hv_rand_set(). (F) Something has attempted to use an internal API call which depends on Perl being compiled with the default support for randomized hash key traversal, but this Perl has been compiled without it. You should report this warning to the relevant upstream party, or recompile perl with default options. =item This use of my() in false conditional is no longer allowed (F) You used a declaration similar to C<my $x if 0>. There has been a long-standing bug in Perl that causes a lexical variable not to be cleared at scope exit when its declaration includes a false conditional. Some people have exploited this bug to achieve a kind of static variable. Since we intend to fix this bug, we don't want people relying on this behavior. You can achieve a similar static effect by declaring the variable in a separate block outside the function, eg sub f { my $x if 0; return $x++ } becomes { my $x; sub f { return $x++ } } Beginning with perl 5.10.0, you can also use C<state> variables to have lexicals that are initialized only once (see L<feature>): sub f { state $x; return $x++ } This use of C<my()> in a false conditional was deprecated beginning in Perl 5.10 and became a fatal error in Perl 5.30. =item Timeout waiting for another thread to define \p{%s} (F) The first time a user-defined property (L<perlunicode/User-Defined Character Properties>) is used, its definition is looked up and converted into an internal form for more efficient handling in subsequent uses. There could be a race if two or more threads tried to do this processing nearly simultaneously. Instead, a critical section is created around this task, locking out all but one thread from doing it. This message indicates that the thread that is doing the conversion is taking an unexpectedly long time. The timeout exists solely to prevent deadlock; it's long enough that the system was likely thrashing and about to crash. There is no real remedy but rebooting. =item times not implemented (F) Your version of the C library apparently doesn't do times(). I suspect you're not running on Unix. =item "-T" is on the #! line, it must also be used on the command line (X) The #! line (or local equivalent) in a Perl script contains the B<-T> option (or the B<-t> option), but Perl was not invoked with B<-T> in its command line. This is an error because, by the time Perl discovers a B<-T> in a script, it's too late to properly taint everything from the environment. So Perl gives up. If the Perl script is being executed as a command using the #! mechanism (or its local equivalent), this error can usually be fixed by editing the #! line so that the B<-%c> option is a part of Perl's first argument: e.g. change C<perl -n -%c> to C<perl -%c -n>. If the Perl script is being executed as C<perl scriptname>, then the B<-%c> option must appear on the command line: C<perl -%c scriptname>. =item To%s: illegal mapping '%s' (F) You tried to define a customized To-mapping for lc(), lcfirst, uc(), or ucfirst() (or their string-inlined versions), but you specified an illegal mapping. See L<perlunicode/"User-Defined Character Properties">. =item Too deeply nested ()-groups (F) Your template contains ()-groups with a ridiculously deep nesting level. =item Too few args to syscall (F) There has to be at least one argument to syscall() to specify the system call to call, silly dilly. =item Too few arguments for subroutine '%s' (F) A subroutine using a signature fewer arguments than required by the signature. The caller of the subroutine is presumably at fault. The message attempts to include the name of the called subroutine. If the subroutine has been aliased, the subroutine's original name will be shown, regardless of what name the caller used. =item Too late for "-%s" option (X) The #! line (or local equivalent) in a Perl script contains the B<-M>, B<-m> or B<-C> option. In the case of B<-M> and B<-m>, this is an error because those options are not intended for use inside scripts. Use the C<use> pragma instead. The B<-C> option only works if it is specified on the command line as well (with the same sequence of letters or numbers following). Either specify this option on the command line, or, if your system supports it, make your script executable and run it directly instead of passing it to perl. =item Too late to run %s block (W void) A CHECK or INIT block is being defined during run time proper, when the opportunity to run them has already passed. Perhaps you are loading a file with C<require> or C<do> when you should be using C<use> instead. Or perhaps you should put the C<require> or C<do> inside a BEGIN block. =item Too many args to syscall (F) Perl supports a maximum of only 14 args to syscall(). =item Too many arguments for %s (F) The function requires fewer arguments than you specified. =item Too many arguments for subroutine '%s' (F) A subroutine using a signature received more arguments than permitted by the signature. The caller of the subroutine is presumably at fault. The message attempts to include the name of the called subroutine. If the subroutine has been aliased, the subroutine's original name will be shown, regardless of what name the caller used. =item Too many nested open parens in regex; marked by <-- HERE in m/%s/ (F) You have exceeded the number of open C<"("> parentheses that haven't been matched by corresponding closing ones. This limit prevents eating up too much memory. It is initially set to 1000, but may be changed by setting C<${^RE_COMPILE_RECURSION_LIMIT}> to some other value. This may need to be done in a BEGIN block before the regular expression pattern is compiled. =item Too many )'s (A) You've accidentally run your script through B<csh> instead of Perl. Check the #! line, or manually feed your script into Perl yourself. =item Too many ('s (A) You've accidentally run your script through B<csh> instead of Perl. Check the #! line, or manually feed your script into Perl yourself. =item Trailing \ in regex m/%s/ (F) The regular expression ends with an unbackslashed backslash. Backslash it. See L<perlre>. =item Transliteration pattern not terminated (F) The lexer couldn't find the interior delimiter of a tr/// or tr[][] or y/// or y[][] construct. Missing the leading C<$> from variables C<$tr> or C<$y> may cause this error. =item Transliteration replacement not terminated (F) The lexer couldn't find the final delimiter of a tr///, tr[][], y/// or y[][] construct. =item '%s' trapped by operation mask (F) You tried to use an operator from a Safe compartment in which it's disallowed. See L<Safe>. =item truncate not implemented (F) Your machine doesn't implement a file truncation mechanism that Configure knows about. =item Type of arg %d to &CORE::%s must be %s (F) The subroutine in question in the CORE package requires its argument to be a hard reference to data of the specified type. Overloading is ignored, so a reference to an object that is not the specified type, but nonetheless has overloading to handle it, will still not be accepted. =item Type of arg %d to %s must be %s (not %s) (F) This function requires the argument in that position to be of a certain type. Arrays must be @NAME or C<@{EXPR}>. Hashes must be %NAME or C<%{EXPR}>. No implicit dereferencing is allowed--use the {EXPR} forms as an explicit dereference. See L<perlref>. =item umask not implemented (F) Your machine doesn't implement the umask function and you tried to use it to restrict permissions for yourself (EXPR & 0700). =item Unbalanced context: %d more PUSHes than POPs (S internal) The exit code detected an internal inconsistency in how many execution contexts were entered and left. =item Unbalanced saves: %d more saves than restores (S internal) The exit code detected an internal inconsistency in how many values were temporarily localized. =item Unbalanced scopes: %d more ENTERs than LEAVEs (S internal) The exit code detected an internal inconsistency in how many blocks were entered and left. =item Unbalanced string table refcount: (%d) for "%s" (S internal) On exit, Perl found some strings remaining in the shared string table used for copy on write and for hash keys. The entries should have been freed, so this indicates a bug somewhere. =item Unbalanced tmps: %d more allocs than frees (S internal) The exit code detected an internal inconsistency in how many mortal scalars were allocated and freed. =item Undefined format "%s" called (F) The format indicated doesn't seem to exist. Perhaps it's really in another package? See L<perlform>. =item Undefined sort subroutine "%s" called (F) The sort comparison routine specified doesn't seem to exist. Perhaps it's in a different package? See L<perlfunc/sort>. =item Undefined subroutine &%s called (F) The subroutine indicated hasn't been defined, or if it was, it has since been undefined. =item Undefined subroutine called (F) The anonymous subroutine you're trying to call hasn't been defined, or if it was, it has since been undefined. =item Undefined subroutine in sort (F) The sort comparison routine specified is declared but doesn't seem to have been defined yet. See L<perlfunc/sort>. =item Undefined top format "%s" called (F) The format indicated doesn't seem to exist. Perhaps it's really in another package? See L<perlform>. =item Undefined value assigned to typeglob (W misc) An undefined value was assigned to a typeglob, a la C<*foo = undef>. This does nothing. It's possible that you really mean C<undef *foo>. =item %s: Undefined variable (A) You've accidentally run your script through B<csh> instead of Perl. Check the #! line, or manually feed your script into Perl yourself. =item Unescaped left brace in regex is illegal here in regex; marked by S<<-- HERE> in m/%s/ (F) The simple rule to remember, if you want to match a literal C<"{"> character (U+007B C<LEFT CURLY BRACKET>) in a regular expression pattern, is to escape each literal instance of it in some way. Generally easiest is to precede it with a backslash, like C<"\{"> or enclose it in square brackets (C<"[{]">). If the pattern delimiters are also braces, any matching right brace (C<"}">) should also be escaped to avoid confusing the parser, for example, qr{abc\{def\}ghi} Forcing literal C<"{"> characters to be escaped enables the Perl language to be extended in various ways in future releases. To avoid needlessly breaking existing code, the restriction is not enforced in contexts where there are unlikely to ever be extensions that could conflict with the use there of C<"{"> as a literal. Those that are not potentially ambiguous do not warn; those that are do raise a non-deprecation warning. The contexts where no warnings or errors are raised are: =over 4 =item * as the first character in a pattern, or following C<"^"> indicating to anchor the match to the beginning of a line. =item * as the first character following a C<"|"> indicating alternation. =item * as the first character in a parenthesized grouping like /foo({bar)/ /foo(?:{bar)/ =item * as the first character following a quantifier /\s*{/ =back =for comment The text of the message above is mostly duplicated below (with changes) to allow splain (and 'use diagnostics') to work. Since one is fatal, and one not, they can't be combined as one message. Perhaps perldiag could be enhanced to handle this case. =item Unescaped left brace in regex is passed through in regex; marked by S<<-- HERE> in m/%s/ (W regexp) The simple rule to remember, if you want to match a literal C<"{"> character (U+007B C<LEFT CURLY BRACKET>) in a regular expression pattern, is to escape each literal instance of it in some way. Generally easiest is to precede it with a backslash, like C<"\{"> or enclose it in square brackets (C<"[{]">). If the pattern delimiters are also braces, any matching right brace (C<"}">) should also be escaped to avoid confusing the parser, for example, qr{abc\{def\}ghi} Forcing literal C<"{"> characters to be escaped enables the Perl language to be extended in various ways in future releases. To avoid needlessly breaking existing code, the restriction is not enforced in contexts where there are unlikely to ever be extensions that could conflict with the use there of C<"{"> as a literal. Those that are not potentially ambiguous do not warn; those that are raise this warning. This makes sure that an inadvertent typo doesn't silently cause the pattern to compile to something unintended. The contexts where no warnings or errors are raised are: =over 4 =item * as the first character in a pattern, or following C<"^"> indicating to anchor the match to the beginning of a line. =item * as the first character following a C<"|"> indicating alternation. =item * as the first character in a parenthesized grouping like /foo({bar)/ /foo(?:{bar)/ =item * as the first character following a quantifier /\s*{/ =back =item Unescaped literal '%c' in regex; marked by <-- HERE in m/%s/ (W regexp) (only under C<S<use re 'strict'>>) Within the scope of C<S<use re 'strict'>> in a regular expression pattern, you included an unescaped C<}> or C<]> which was interpreted literally. These two characters are sometimes metacharacters, and sometimes literals, depending on what precedes them in the pattern. This is unlike the similar C<)> which is always a metacharacter unless escaped. This action at a distance, perhaps a large distance, can lead to Perl silently misinterpreting what you meant, so when you specify that you want extra checking by C<S<use re 'strict'>>, this warning is generated. If you meant the character as a literal, simply confirm that to Perl by preceding the character with a backslash, or make it into a bracketed character class (like C<[}]>). If you meant it as closing a corresponding C<[> or C<{>, you'll need to look back through the pattern to find out why that isn't happening. =item unexec of %s into %s failed! (F) The unexec() routine failed for some reason. See your local FSF representative, who probably put it there in the first place. =item Unexpected binary operator '%c' with no preceding operand in regex; marked by S<<-- HERE> in m/%s/ (F) You had something like this: (?[ | \p{Digit} ]) where the C<"|"> is a binary operator with an operand on the right, but no operand on the left. =item Unexpected character in regex; marked by S<<-- HERE> in m/%s/ (F) You had something like this: (?[ z ]) Within C<(?[ ])>, no literal characters are allowed unless they are within an inner pair of square brackets, like (?[ [ z ] ]) Another possibility is that you forgot a backslash. Perl isn't smart enough to figure out what you really meant. =item Unexpected constant lvalue entersub entry via type/targ %d:%d (P) When compiling a subroutine call in lvalue context, Perl failed an internal consistency check. It encountered a malformed op tree. =item Unexpected exit %u (S) exit() was called or the script otherwise finished gracefully when C<PERL_EXIT_WARN> was set in C<PL_exit_flags>. =item Unexpected exit failure %d (S) An uncaught die() was called when C<PERL_EXIT_WARN> was set in C<PL_exit_flags>. =item Unexpected ')' in regex; marked by S<<-- HERE> in m/%s/ (F) You had something like this: (?[ ( \p{Digit} + ) ]) The C<")"> is out-of-place. Something apparently was supposed to be combined with the digits, or the C<"+"> shouldn't be there, or something like that. Perl can't figure out what was intended. =item Unexpected ']' with no following ')' in (?[... in regex; marked by <-- HERE in m/%s/ (F) While parsing an extended character class a ']' character was encountered at a point in the definition where the only legal use of ']' is to close the character class definition as part of a '])', you may have forgotten the close paren, or otherwise confused the parser. =item Unexpected '(' with no preceding operator in regex; marked by S<<-- HERE> in m/%s/ (F) You had something like this: (?[ \p{Digit} ( \p{Lao} + \p{Thai} ) ]) There should be an operator before the C<"(">, as there's no indication as to how the digits are to be combined with the characters in the Lao and Thai scripts. =item Unicode non-character U+%X is not recommended for open interchange (S nonchar) Certain codepoints, such as U+FFFE and U+FFFF, are defined by the Unicode standard to be non-characters. Those are legal codepoints, but are reserved for internal use; so, applications shouldn't attempt to exchange them. An application may not be expecting any of these characters at all, and receiving them may lead to bugs. If you know what you are doing you can turn off this warning by C<no warnings 'nonchar';>. This is not really a "severe" error, but it is supposed to be raised by default even if warnings are not enabled, and currently the only way to do that in Perl is to mark it as serious. =item Unicode property wildcard not terminated (F) A Unicode property wildcard looks like a delimited regular expression pattern (all within the braces of the enclosing C<\p{...}>. The closing delimtter to match the opening one was not found. If the opening one is escaped by preceding it with a backslash, the closing one must also be so escaped. =item Unicode string properties are not implemented in (?[...]) in regex; marked by <-- HERE in m/%s/ (F) A Unicode string property is one which expands to a sequence of multiple characters. An example is C<\p{name=KATAKANA LETTER AINU P}>, which is comprised of the sequence C<\N{KATAKANA LETTER SMALL H}> followed by C<\N{COMBINING KATAKANA-HIRAGANA SEMI-VOICED SOUND MARK}>. Extended character classes, C<(?[...])> currently cannot handle these. =item Unicode surrogate U+%X is illegal in UTF-8 (S surrogate) You had a UTF-16 surrogate in a context where they are not considered acceptable. These code points, between U+D800 and U+DFFF (inclusive), are used by Unicode only for UTF-16. However, Perl internally allows all unsigned integer code points (up to the size limit available on your platform), including surrogates. But these can cause problems when being input or output, which is likely where this message came from. If you really really know what you are doing you can turn off this warning by C<no warnings 'surrogate';>. =item Unknown charname '%s' (F) The name you used inside C<\N{}> is unknown to Perl. Check the spelling. You can say C<use charnames ":loose"> to not have to be so precise about spaces, hyphens, and capitalization on standard Unicode names. (Any custom aliases that have been created must be specified exactly, regardless of whether C<:loose> is used or not.) This error may also happen if the C<\N{}> is not in the scope of the corresponding C<S<use charnames>>. =item Unknown '(*...)' construct '%s' in regex; marked by <-- HERE in m/%s/ (F) The C<(*> was followed by something that the regular expression compiler does not recognize. Check your spelling. =item Unknown error (P) Perl was about to print an error message in C<$@>, but the C<$@> variable did not exist, even after an attempt to create it. =item Unknown locale category %d; can't set it to %s (W locale) You used a locale category that perl doesn't recognize, so it cannot carry out your request. Check that you are using a valid category. If so, see L<perllocale/Multi-threaded> for advice on reporting this as a bug, and for modifying perl locally to accommodate your needs. =item Unknown open() mode '%s' (F) The second argument of 3-argument open() is not among the list of valid modes: C<< < >>, C<< > >>, C<<< >> >>>, C<< +< >>, C<< +> >>, C<<< +>> >>>, C<-|>, C<|->, C<< <& >>, C<< >& >>. =item Unknown PerlIO layer "%s" (W layer) An attempt was made to push an unknown layer onto the Perl I/O system. (Layers take care of transforming data between external and internal representations.) Note that some layers, such as C<mmap>, are not supported in all environments. If your program didn't explicitly request the failing operation, it may be the result of the value of the environment variable PERLIO. =item Unknown process %x sent message to prime_env_iter: %s (P) An error peculiar to VMS. Perl was reading values for %ENV before iterating over it, and someone else stuck a message in the stream of data Perl expected. Someone's very confused, or perhaps trying to subvert Perl's population of %ENV for nefarious purposes. =item Unknown regexp modifier "/%s" (F) Alphanumerics immediately following the closing delimiter of a regular expression pattern are interpreted by Perl as modifier flags for the regex. One of the ones you specified is invalid. One way this can happen is if you didn't put in white space between the end of the regex and a following alphanumeric operator: if ($a =~ /foo/and $bar == 3) { ... } The C<"a"> is a valid modifier flag, but the C<"n"> is not, and raises this error. Likely what was meant instead was: if ($a =~ /foo/ and $bar == 3) { ... } =item Unknown "re" subpragma '%s' (known ones are: %s) (W) You tried to use an unknown subpragma of the "re" pragma. =item Unknown switch condition (?(...)) in regex; marked by S<<-- HERE> in m/%s/ (F) The condition part of a (?(condition)if-clause|else-clause) construct is not known. The condition must be one of the following: (1) (2) ... true if 1st, 2nd, etc., capture matched (<NAME>) ('NAME') true if named capture matched (?=...) (?<=...) true if subpattern matches (*pla:...) (*plb:...) true if subpattern matches; also (*positive_lookahead:...) (*positive_lookbehind:...) (*nla:...) (*nlb:...) true if subpattern fails to match; also (*negative_lookahead:...) (*negative_lookbehind:...) (?{ CODE }) true if code returns a true value (R) true if evaluating inside recursion (R1) (R2) ... true if directly inside capture group 1, 2, etc. (R&NAME) true if directly inside named capture (DEFINE) always false; for defining named subpatterns The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. See L<perlre>. =item Unknown Unicode option letter '%c' (F) You specified an unknown Unicode option. See L<perlrun|perlrun/-C [numberE<sol>list]> documentation of the C<-C> switch for the list of known options. =item Unknown Unicode option value %d (F) You specified an unknown Unicode option. See L<perlrun|perlrun/-C [numberE<sol>list]> documentation of the C<-C> switch for the list of known options. =item Unknown user-defined property name \p{%s} (F) You specified to use a property within the C<\p{...}> which was a syntactically valid user-defined property, but no definition was found for it by the time one was required to proceed. Check your spelling. See L<perlunicode/User-Defined Character Properties>. =item Unknown verb pattern '%s' in regex; marked by S<<-- HERE> in m/%s/ (F) You either made a typo or have incorrectly put a C<*> quantifier after an open brace in your pattern. Check the pattern and review L<perlre> for details on legal verb patterns. =item Unknown warnings category '%s' (F) An error issued by the C<warnings> pragma. You specified a warnings category that is unknown to perl at this point. Note that if you want to enable a warnings category registered by a module (e.g. C<use warnings 'File::Find'>), you must have loaded this module first. =item Unmatched [ in regex; marked by S<<-- HERE> in m/%s/ (F) The brackets around a character class must match. If you wish to include a closing bracket in a character class, backslash it or put it first. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. See L<perlre>. =item Unmatched ( in regex; marked by S<<-- HERE> in m/%s/ =item Unmatched ) in regex; marked by S<<-- HERE> in m/%s/ (F) Unbackslashed parentheses must always be balanced in regular expressions. If you're a vi user, the % key is valuable for finding the matching parenthesis. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. See L<perlre>. =item Unmatched right %s bracket (F) The lexer counted more closing curly or square brackets than opening ones, so you're probably missing a matching opening bracket. As a general rule, you'll find the missing one (so to speak) near the place you were last editing. =item Unquoted string "%s" may clash with future reserved word (W reserved) You used a bareword that might someday be claimed as a reserved word. It's best to put such a word in quotes, or capitalize it somehow, or insert an underbar into it. You might also declare it as a subroutine. =item Unrecognized character %s; marked by S<<-- HERE> after %s near column %d (F) The Perl parser has no idea what to do with the specified character in your Perl script (or eval) near the specified column. Perhaps you tried to run a compressed script, a binary program, or a directory as a Perl program. =item Unrecognized escape \%c in character class in regex; marked by S<<-- HERE> in m/%s/ (F) You used a backslash-character combination which is not recognized by Perl inside character classes. This is a fatal error when the character class is used within C<(?[ ])>. =item Unrecognized escape \%c in character class passed through in regex; marked by S<<-- HERE> in m/%s/ (W regexp) You used a backslash-character combination which is not recognized by Perl inside character classes. The character was understood literally, but this may change in a future version of Perl. The S<<-- HERE> shows whereabouts in the regular expression the escape was discovered. =item Unrecognized escape \%c passed through (W misc) You used a backslash-character combination which is not recognized by Perl. The character was understood literally, but this may change in a future version of Perl. =item Unrecognized escape \%s passed through in regex; marked by S<<-- HERE> in m/%s/ (W regexp) You used a backslash-character combination which is not recognized by Perl. The character(s) were understood literally, but this may change in a future version of Perl. The S<<-- HERE> shows whereabouts in the regular expression the escape was discovered. =item Unrecognized signal name "%s" (F) You specified a signal name to the kill() function that was not recognized. Say C<kill -l> in your shell to see the valid signal names on your system. =item Unrecognized switch: -%s (-h will show valid options) (F) You specified an illegal option to Perl. Don't do that. (If you think you didn't do that, check the #! line to see if it's supplying the bad switch on your behalf.) =item Unsuccessful %s on filename containing newline (W newline) A file operation was attempted on a filename, and that operation failed, PROBABLY because the filename contained a newline, PROBABLY because you forgot to chomp() it off. See L<perlfunc/chomp>. =item Unsupported directory function "%s" called (F) Your machine doesn't support opendir() and readdir(). =item Unsupported function %s (F) This machine doesn't implement the indicated function, apparently. At least, Configure doesn't think so. =item Unsupported function fork (F) Your version of executable does not support forking. Note that under some systems, like OS/2, there may be different flavors of Perl executables, some of which may support fork, some not. Try changing the name you call Perl by to C<perl_>, C<perl__>, and so on. =item Unsupported script encoding %s (F) Your program file begins with a Unicode Byte Order Mark (BOM) which declares it to be in a Unicode encoding that Perl cannot read. =item Unsupported socket function "%s" called (F) Your machine doesn't support the Berkeley socket mechanism, or at least that's what Configure thought. =item Unterminated '(*...' argument in regex; marked by <-- HERE in m/%s/ (F) You used a pattern of the form C<(*...:...)> but did not terminate the pattern with a C<)>. Fix the pattern and retry. =item Unterminated attribute list (F) The lexer found something other than a simple identifier at the start of an attribute, and it wasn't a semicolon or the start of a block. Perhaps you terminated the parameter list of the previous attribute too soon. See L<attributes>. =item Unterminated attribute parameter in attribute list (F) The lexer saw an opening (left) parenthesis character while parsing an attribute list, but the matching closing (right) parenthesis character was not found. You may need to add (or remove) a backslash character to get your parentheses to balance. See L<attributes>. =item Unterminated compressed integer (F) An argument to unpack("w",...) was incompatible with the BER compressed integer format and could not be converted to an integer. See L<perlfunc/pack>. =item Unterminated '(*...' construct in regex; marked by <-- HERE in m/%s/ (F) You used a pattern of the form C<(*...)> but did not terminate the pattern with a C<)>. Fix the pattern and retry. =item Unterminated delimiter for here document (F) This message occurs when a here document label has an initial quotation mark but the final quotation mark is missing. Perhaps you wrote: <<"foo instead of: <<"foo" =item Unterminated \g... pattern in regex; marked by S<<-- HERE> in m/%s/ =item Unterminated \g{...} pattern in regex; marked by S<<-- HERE> in m/%s/ (F) In a regular expression, you had a C<\g> that wasn't followed by a proper group reference. In the case of C<\g{>, the closing brace is missing; otherwise the C<\g> must be followed by an integer. Fix the pattern and retry. =item Unterminated <> operator (F) The lexer saw a left angle bracket in a place where it was expecting a term, so it's looking for the corresponding right angle bracket, and not finding it. Chances are you left some needed parentheses out earlier in the line, and you really meant a "less than". =item Unterminated verb pattern argument in regex; marked by S<<-- HERE> in m/%s/ (F) You used a pattern of the form C<(*VERB:ARG)> but did not terminate the pattern with a C<)>. Fix the pattern and retry. =item Unterminated verb pattern in regex; marked by S<<-- HERE> in m/%s/ (F) You used a pattern of the form C<(*VERB)> but did not terminate the pattern with a C<)>. Fix the pattern and retry. =item untie attempted while %d inner references still exist (W untie) A copy of the object returned from C<tie> (or C<tied>) was still valid when C<untie> was called. =item Usage: POSIX::%s(%s) (F) You called a POSIX function with incorrect arguments. See L<POSIX/FUNCTIONS> for more information. =item Usage: Win32::%s(%s) (F) You called a Win32 function with incorrect arguments. See L<Win32> for more information. =item $[ used in %s (did you mean $] ?) (W syntax) You used C<$[> in a comparison, such as: if ($[ > 5.006) { ... } You probably meant to use C<$]> instead. C<$[> is the base for indexing arrays. C<$]> is the Perl version number in decimal. =item Use "%s" instead of "%s" (F) The second listed construct is no longer legal. Use the first one instead. =item Useless assignment to a temporary (W misc) You assigned to an lvalue subroutine, but what the subroutine returned was a temporary scalar about to be discarded, so the assignment had no effect. =item Useless (?-%s) - don't use /%s modifier in regex; marked by S<<-- HERE> in m/%s/ (W regexp) You have used an internal modifier such as (?-o) that has no meaning unless removed from the entire regexp: if ($string =~ /(?-o)$pattern/o) { ... } must be written as if ($string =~ /$pattern/) { ... } The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. See L<perlre>. =item Useless localization of %s (W syntax) The localization of lvalues such as C<local($x=10)> is legal, but in fact the local() currently has no effect. This may change at some point in the future, but in the meantime such code is discouraged. =item Useless (?%s) - use /%s modifier in regex; marked by S<<-- HERE> in m/%s/ (W regexp) You have used an internal modifier such as (?o) that has no meaning unless applied to the entire regexp: if ($string =~ /(?o)$pattern/) { ... } must be written as if ($string =~ /$pattern/o) { ... } The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. See L<perlre>. =item Useless use of attribute "const" (W misc) The C<const> attribute has no effect except on anonymous closure prototypes. You applied it to a subroutine via L<attributes.pm|attributes>. This is only useful inside an attribute handler for an anonymous subroutine. =item Useless use of /d modifier in transliteration operator (W misc) You have used the /d modifier where the searchlist has the same length as the replacelist. See L<perlop> for more information about the /d modifier. =item Useless use of \E (W misc) You have a \E in a double-quotish string without a C<\U>, C<\L> or C<\Q> preceding it. =item Useless use of greediness modifier '%c' in regex; marked by S<<-- HERE> in m/%s/ (W regexp) You specified something like these: qr/a{3}?/ qr/b{1,1}+/ The C<"?"> and C<"+"> don't have any effect, as they modify whether to match more or fewer when there is a choice, and by specifying to match exactly a given numer, there is no room left for a choice. =item Useless use of %s in void context (W void) You did something without a side effect in a context that does nothing with the return value, such as a statement that doesn't return a value from a block, or the left side of a scalar comma operator. Very often this points not to stupidity on your part, but a failure of Perl to parse your program the way you thought it would. For example, you'd get this if you mixed up your C precedence with Python precedence and said $one, $two = 1, 2; when you meant to say ($one, $two) = (1, 2); Another common error is to use ordinary parentheses to construct a list reference when you should be using square or curly brackets, for example, if you say $array = (1,2); when you should have said $array = [1,2]; The square brackets explicitly turn a list value into a scalar value, while parentheses do not. So when a parenthesized list is evaluated in a scalar context, the comma is treated like C's comma operator, which throws away the left argument, which is not what you want. See L<perlref> for more on this. This warning will not be issued for numerical constants equal to 0 or 1 since they are often used in statements like 1 while sub_with_side_effects(); String constants that would normally evaluate to 0 or 1 are warned about. =item Useless use of (?-p) in regex; marked by S<<-- HERE> in m/%s/ (W regexp) The C<p> modifier cannot be turned off once set. Trying to do so is futile. =item Useless use of "re" pragma (W) You did C<use re;> without any arguments. That isn't very useful. =item Useless use of sort in scalar context (W void) You used sort in scalar context, as in : my $x = sort @y; This is not very useful, and perl currently optimizes this away. =item Useless use of %s with no values (W syntax) You used the push() or unshift() function with no arguments apart from the array, like C<push(@x)> or C<unshift(@foo)>. That won't usually have any effect on the array, so is completely useless. It's possible in principle that push(@tied_array) could have some effect if the array is tied to a class which implements a PUSH method. If so, you can write it as C<push(@tied_array,())> to avoid this warning. =item "use" not allowed in expression (F) The "use" keyword is recognized and executed at compile time, and returns no useful value. See L<perlmod>. =item Use of bare << to mean <<"" is forbidden (F) You are now required to use the explicitly quoted form if you wish to use an empty line as the terminator of the here-document. Use of a bare terminator was deprecated in Perl 5.000, and is a fatal error as of Perl 5.28. =item Use of /c modifier is meaningless in s/// (W regexp) You used the /c modifier in a substitution. The /c modifier is not presently meaningful in substitutions. =item Use of /c modifier is meaningless without /g (W regexp) You used the /c modifier with a regex operand, but didn't use the /g modifier. Currently, /c is meaningful only when /g is used. (This may change in the future.) =item Use of code point 0x%s is not allowed; the permissible max is 0x%X =item Use of code point 0x%s is not allowed; the permissible max is 0x%X in regex; marked by <-- HERE in m/%s/ (F) You used a code point that is not allowed, because it is too large. Unicode only allows code points up to 0x10FFFF, but Perl allows much larger ones. Earlier versions of Perl allowed code points above IV_MAX (0x7FFFFFF on 32-bit platforms, 0x7FFFFFFFFFFFFFFF on 64-bit platforms), however, this could possibly break the perl interpreter in some constructs, including causing it to hang in a few cases. If your code is to run on various platforms, keep in mind that the upper limit depends on the platform. It is much larger on 64-bit word sizes than 32-bit ones. The use of out of range code points was deprecated in Perl 5.24, and became a fatal error in Perl 5.28. =item Use of each() on hash after insertion without resetting hash iterator results in undefined behavior (S internal) The behavior of C<each()> after insertion is undefined; it may skip items, or visit items more than once. Consider using C<keys()> instead of C<each()>. =item Use of := for an empty attribute list is not allowed (F) The construction C<my $x := 42> used to parse as equivalent to C<my $x : = 42> (applying an empty attribute list to C<$x>). This construct was deprecated in 5.12.0, and has now been made a syntax error, so C<:=> can be reclaimed as a new operator in the future. If you need an empty attribute list, for example in a code generator, add a space before the C<=>. =item Use of %s for non-UTF-8 locale is wrong. Assuming a UTF-8 locale (W locale) You are matching a regular expression using locale rules, and the specified construct was encountered. This construct is only valid for UTF-8 locales, which the current locale isn't. This doesn't make sense. Perl will continue, assuming a Unicode (UTF-8) locale, but the results are likely to be wrong. =item Use of freed value in iteration (F) Perhaps you modified the iterated array within the loop? This error is typically caused by code like the following: @a = (3,4); @a = () for (1,2,@a); You are not supposed to modify arrays while they are being iterated over. For speed and efficiency reasons, Perl internally does not do full reference-counting of iterated items, hence deleting such an item in the middle of an iteration causes Perl to see a freed value. =item Use of /g modifier is meaningless in split (W regexp) You used the /g modifier on the pattern for a C<split> operator. Since C<split> always tries to match the pattern repeatedly, the C</g> has no effect. =item Use of "goto" to jump into a construct is deprecated (D deprecated) Using C<goto> to jump from an outer scope into an inner scope is deprecated and should be avoided. This was deprecated in Perl 5.12. =item Use of '%s' in \p{} or \P{} is deprecated because: %s (D deprecated) Certain properties are deprecated by Unicode, and may eventually be removed from the Standard, at which time Perl will follow along. In the meantime, this message is raised to notify you. =item Use of inherited AUTOLOAD for non-method %s::%s() is no longer allowed (F) As an accidental feature, C<AUTOLOAD> subroutines were looked up as methods (using the C<@ISA> hierarchy), even when the subroutines to be autoloaded were called as plain functions (e.g. C<Foo::bar()>), not as methods (e.g. C<< Foo->bar() >> or C<< $obj->bar() >>). This was deprecated in Perl 5.004, and was made fatal in Perl 5.28. =item Use of %s in printf format not supported (F) You attempted to use a feature of printf that is accessible from only C. This usually means there's a better way to do it in Perl. =item Use of %s is not allowed in Unicode property wildcard subpatterns in regex; marked by S<<-- HERE> in m/%s/ (F) You were using a wildcard subpattern a Unicode property value, and the subpattern contained something that is illegal. Not all regular expression capabilities are legal in such subpatterns, and this is one. Rewrite your subppattern to not use the offending construct. See L<perlunicode/Wildcards in Property Values>. =item Use of -l on filehandle%s (W io) A filehandle represents an opened file, and when you opened the file it already went past any symlink you are presumably trying to look for. The operation returned C<undef>. Use a filename instead. =item Use of reference "%s" as array index (W misc) You tried to use a reference as an array index; this probably isn't what you mean, because references in numerical context tend to be huge numbers, and so usually indicates programmer error. If you really do mean it, explicitly numify your reference, like so: C<$array[0+$ref]>. This warning is not given for overloaded objects, however, because you can overload the numification and stringification operators and then you presumably know what you are doing. =item Use of strings with code points over 0xFF as arguments to %s operator is not allowed (F) You tried to use one of the string bitwise operators (C<&> or C<|> or C<^> or C<~>) on a string containing a code point over 0xFF. The string bitwise operators treat their operands as strings of bytes, and values beyond 0xFF are nonsensical in this context. Certain instances became fatal in Perl 5.28; others in perl 5.32. =item Use of strings with code points over 0xFF as arguments to vec is forbidden (F) You tried to use L<C<vec>|perlfunc/vec EXPR,OFFSET,BITS> on a string containing a code point over 0xFF, which is nonsensical here. This became fatal in Perl 5.32. =item Use of tainted arguments in %s is deprecated (W taint, deprecated) You have supplied C<system()> or C<exec()> with multiple arguments and at least one of them is tainted. This used to be allowed but will become a fatal error in a future version of perl. Untaint your arguments. See L<perlsec>. =item Use of unassigned code point or non-standalone grapheme for a delimiter is not allowed (F) A grapheme is what appears to a native-speaker of a language to be a character. In Unicode (and hence Perl) a grapheme may actually be several adjacent characters that together form a complete grapheme. For example, there can be a base character, like "R" and an accent, like a circumflex "^", that appear when displayed to be a single character with the circumflex hovering over the "R". Perl currently allows things like that circumflex to be delimiters of strings, patterns, I<etc>. When displayed, the circumflex would look like it belongs to the character just to the left of it. In order to move the language to be able to accept graphemes as delimiters, we cannot allow the use of delimiters which aren't graphemes by themselves. Also, a delimiter must already be assigned (or known to be never going to be assigned) to try to future-proof code, for otherwise code that works today would fail to compile if the currently unassigned delimiter ends up being something that isn't a stand-alone grapheme. Because Unicode is never going to assign L<non-character code points|perlunicode/Noncharacter code points>, nor L<code points that are above the legal Unicode maximum| perlunicode/Beyond Unicode code points>, those can be delimiters, and their use is legal. =item Use of uninitialized value%s (W uninitialized) An undefined value was used as if it were already defined. It was interpreted as a "" or a 0, but maybe it was a mistake. To suppress this warning assign a defined value to your variables. To help you figure out what was undefined, perl will try to tell you the name of the variable (if any) that was undefined. In some cases it cannot do this, so it also tells you what operation you used the undefined value in. Note, however, that perl optimizes your program and the operation displayed in the warning may not necessarily appear literally in your program. For example, C<"that $foo"> is usually optimized into C<"that " . $foo>, and the warning will refer to the C<concatenation (.)> operator, even though there is no C<.> in your program. =item "use re 'strict'" is experimental (S experimental::re_strict) The things that are different when a regular expression pattern is compiled under C<'strict'> are subject to change in future Perl releases in incompatible ways. This means that a pattern that compiles today may not in a future Perl release. This warning is to alert you to that risk. =item Use \x{...} for more than two hex characters in regex; marked by S<<-- HERE> in m/%s/ (F) In a regular expression, you said something like (?[ [ \xBEEF ] ]) Perl isn't sure if you meant this (?[ [ \x{BEEF} ] ]) or if you meant this (?[ [ \x{BE} E F ] ]) You need to add either braces or blanks to disambiguate. =item Using just the first character returned by \N{} in character class in regex; marked by S<<-- HERE> in m/%s/ (W regexp) Named Unicode character escapes C<(\N{...})> may return a multi-character sequence. Even though a character class is supposed to match just one character of input, perl will match the whole thing correctly, except when the class is inverted (C<[^...]>), or the escape is the beginning or final end point of a range. For these, what should happen isn't clear at all. In these circumstances, Perl discards all but the first character of the returned sequence, which is not likely what you want. =item Using just the single character results returned by \p{} in (?[...]) in regex; marked by S<<-- HERE> in m/%s/ (W regexp) Extended character classes currently cannot handle operands that evaluate to more than one character. These are removed from the results of the expansion of the C<\p{}>. This situation can happen, for example, in (?[ \p{name=/KATAKANA/} ]) "KATAKANA LETTER AINU P" is a legal Unicode name (technically a "named sequence"), but it is actually two characters. The above expression with match only the Unicode names containing KATAKANA that represent single characters. =item Using /u for '%s' instead of /%s in regex; marked by S<<-- HERE> in m/%s/ (W regexp) You used a Unicode boundary (C<\b{...}> or C<\B{...}>) in a portion of a regular expression where the character set modifiers C</a> or C</aa> are in effect. These two modifiers indicate an ASCII interpretation, and this doesn't make sense for a Unicode definition. The generated regular expression will compile so that the boundary uses all of Unicode. No other portion of the regular expression is affected. =item Using !~ with %s doesn't make sense (F) Using the C<!~> operator with C<s///r>, C<tr///r> or C<y///r> is currently reserved for future use, as the exact behavior has not been decided. (Simply returning the boolean opposite of the modified string is usually not particularly useful.) =item UTF-16 surrogate U+%X (S surrogate) You had a UTF-16 surrogate in a context where they are not considered acceptable. These code points, between U+D800 and U+DFFF (inclusive), are used by Unicode only for UTF-16. However, Perl internally allows all unsigned integer code points (up to the size limit available on your platform), including surrogates. But these can cause problems when being input or output, which is likely where this message came from. If you really really know what you are doing you can turn off this warning by C<no warnings 'surrogate';>. =item Value of %s can be "0"; test with defined() (W misc) In a conditional expression, you used <HANDLE>, <*> (glob), C<each()>, or C<readdir()> as a boolean value. Each of these constructs can return a value of "0"; that would make the conditional expression false, which is probably not what you intended. When using these constructs in conditional expressions, test their values with the C<defined> operator. =item Value of CLI symbol "%s" too long (W misc) A warning peculiar to VMS. Perl tried to read the value of an %ENV element from a CLI symbol table, and found a resultant string longer than 1024 characters. The return value has been truncated to 1024 characters. =item Variable "%s" is not available (W closure) During compilation, an inner named subroutine or eval is attempting to capture an outer lexical that is not currently available. This can happen for one of two reasons. First, the outer lexical may be declared in an outer anonymous subroutine that has not yet been created. (Remember that named subs are created at compile time, while anonymous subs are created at run-time.) For example, sub { my $a; sub f { $a } } At the time that f is created, it can't capture the current value of $a, since the anonymous subroutine hasn't been created yet. Conversely, the following won't give a warning since the anonymous subroutine has by now been created and is live: sub { my $a; eval 'sub f { $a }' }->(); The second situation is caused by an eval accessing a variable that has gone out of scope, for example, sub f { my $a; sub { eval '$a' } } f()->(); Here, when the '$a' in the eval is being compiled, f() is not currently being executed, so its $a is not available for capture. =item Variable "%s" is not imported%s (S misc) With "use strict" in effect, you referred to a global variable that you apparently thought was imported from another module, because something else of the same name (usually a subroutine) is exported by that module. It usually means you put the wrong funny character on the front of your variable. =item Variable length lookbehind not implemented in regex m/%s/ (F) B<This message no longer should be raised as of Perl 5.30.> It is retained in this document as a convenience for people using an earlier Perl version. In Perl 5.30 and earlier, lookbehind is allowed only for subexpressions whose length is fixed and known at compile time. For positive lookbehind, you can use the C<\K> regex construct as a way to get the equivalent functionality. See L<(?<=pattern) and \K in perlre|perlre/\K>. Starting in Perl 5.18, there are non-obvious Unicode rules under C</i> that can match variably, but which you might not think could. For example, the substring C<"ss"> can match the single character LATIN SMALL LETTER SHARP S. Here's a complete list of the current ones affecting ASCII characters: ASCII sequence Matches single letter under /i FF U+FB00 LATIN SMALL LIGATURE FF FFI U+FB03 LATIN SMALL LIGATURE FFI FFL U+FB04 LATIN SMALL LIGATURE FFL FI U+FB01 LATIN SMALL LIGATURE FI FL U+FB02 LATIN SMALL LIGATURE FL SS U+00DF LATIN SMALL LETTER SHARP S U+1E9E LATIN CAPITAL LETTER SHARP S ST U+FB06 LATIN SMALL LIGATURE ST U+FB05 LATIN SMALL LIGATURE LONG S T This list is subject to change, but is quite unlikely to. Each ASCII sequence can be any combination of upper- and lowercase. You can avoid this by using a bracketed character class in the lookbehind assertion, like (?<![sS]t) (?<![fF]f[iI]) This fools Perl into not matching the ligatures. Another option for Perls starting with 5.16, if you only care about ASCII matches, is to add the C</aa> modifier to the regex. This will exclude all these non-obvious matches, thus getting rid of this message. You can also say use if $] ge 5.016, re => '/aa'; to apply C</aa> to all regular expressions compiled within its scope. See L<re>. =item "%s" variable %s masks earlier declaration in same %s (W shadow) A "my", "our" or "state" variable has been redeclared in the current scope or statement, effectively eliminating all access to the previous instance. This is almost always a typographical error. Note that the earlier variable will still exist until the end of the scope or until all closure references to it are destroyed. =item Variable syntax (A) You've accidentally run your script through B<csh> instead of Perl. Check the #! line, or manually feed your script into Perl yourself. =item Variable "%s" will not stay shared (W closure) An inner (nested) I<named> subroutine is referencing a lexical variable defined in an outer named subroutine. When the inner subroutine is called, it will see the value of the outer subroutine's variable as it was before and during the *first* call to the outer subroutine; in this case, after the first call to the outer subroutine is complete, the inner and outer subroutines will no longer share a common value for the variable. In other words, the variable will no longer be shared. This problem can usually be solved by making the inner subroutine anonymous, using the C<sub {}> syntax. When inner anonymous subs that reference variables in outer subroutines are created, they are automatically rebound to the current values of such variables. =item vector argument not supported with alpha versions (S printf) The %vd (s)printf format does not support version objects with alpha parts. =item Verb pattern '%s' has a mandatory argument in regex; marked by S<<-- HERE> in m/%s/ (F) You used a verb pattern that requires an argument. Supply an argument or check that you are using the right verb. =item Verb pattern '%s' may not have an argument in regex; marked by S<<-- HERE> in m/%s/ (F) You used a verb pattern that is not allowed an argument. Remove the argument or check that you are using the right verb. =item Version control conflict marker (F) The parser found a line starting with C<E<lt><<<<<<>, C<E<gt>E<gt>E<gt>E<gt>E<gt>E<gt>E<gt>>, or C<=======>. These may be left by a version control system to mark conflicts after a failed merge operation. =item Version number must be a constant number (P) The attempt to translate a C<use Module n.n LIST> statement into its equivalent C<BEGIN> block found an internal inconsistency with the version number. =item Version string '%s' contains invalid data; ignoring: '%s' (W misc) The version string contains invalid characters at the end, which are being ignored. =item Warning: something's wrong (W) You passed warn() an empty string (the equivalent of C<warn "">) or you called it with no args and C<$@> was empty. =item Warning: unable to close filehandle %s properly (S) The implicit close() done by an open() got an error indication on the close(). This usually indicates your file system ran out of disk space. =item Warning: unable to close filehandle properly: %s =item Warning: unable to close filehandle %s properly: %s (S io) There were errors during the implicit close() done on a filehandle when its reference count reached zero while it was still open, e.g.: { open my $fh, '>', $file or die "open: '$file': $!\n"; print $fh $data or die "print: $!"; } # implicit close here Because various errors may only be detected by close() (e.g. buffering could allow the C<print> in this example to return true even when the disk is full), it is dangerous to ignore its result. So when it happens implicitly, perl will signal errors by warning. B<Prior to version 5.22.0, perl ignored such errors>, so the common idiom shown above was liable to cause B<silent data loss>. =item Warning: Use of "%s" without parentheses is ambiguous (S ambiguous) You wrote a unary operator followed by something that looks like a binary operator that could also have been interpreted as a term or unary operator. For instance, if you know that the rand function has a default argument of 1.0, and you write rand + 5; you may THINK you wrote the same thing as rand() + 5; but in actual fact, you got rand(+5); So put in parentheses to say what you really mean. =item when is experimental (S experimental::smartmatch) C<when> depends on smartmatch, which is experimental. Additionally, it has several special cases that may not be immediately obvious, and their behavior may change or even be removed in any future release of perl. See the explanation under L<perlsyn/Experimental Details on given and when>. =item Wide character in %s (S utf8) Perl met a wide character (ordinal >255) when it wasn't expecting one. This warning is by default on for I/O (like print). If this warning does come from I/O, the easiest way to quiet it is simply to add the C<:utf8> layer, I<e.g.>, S<C<binmode STDOUT, ':utf8'>>. Another way to turn off the warning is to add S<C<no warnings 'utf8';>> but that is often closer to cheating. In general, you are supposed to explicitly mark the filehandle with an encoding, see L<open> and L<perlfunc/binmode>. If the warning comes from other than I/O, this diagnostic probably indicates that incorrect results are being obtained. You should examine your code to determine how a wide character is getting to an operation that doesn't handle them. =item Wide character (U+%X) in %s (W locale) While in a single-byte locale (I<i.e.>, a non-UTF-8 one), a multi-byte character was encountered. Perl considers this character to be the specified Unicode code point. Combining non-UTF-8 locales and Unicode is dangerous. Almost certainly some characters will have two different representations. For example, in the ISO 8859-7 (Greek) locale, the code point 0xC3 represents a Capital Gamma. But so also does 0x393. This will make string comparisons unreliable. You likely need to figure out how this multi-byte character got mixed up with your single-byte locale (or perhaps you thought you had a UTF-8 locale, but Perl disagrees). =item Within []-length '%c' not allowed (F) The count in the (un)pack template may be replaced by C<[TEMPLATE]> only if C<TEMPLATE> always matches the same amount of packed bytes that can be determined from the template alone. This is not possible if it contains any of the codes @, /, U, u, w or a *-length. Redesign the template. =item While trying to resolve method call %s->%s() can not locate package "%s" yet it is mentioned in @%s::ISA (perhaps you forgot to load "%s"?) (W syntax) It is possible that the C<@ISA> contains a misspelled or never loaded package name, which can result in perl choosing an unexpected parent class's method to resolve the method call. If this is deliberate you can do something like @Missing::Package::ISA = (); to silence the warnings, otherwise you should correct the package name, or ensure that the package is loaded prior to the method call. =item %s() with negative argument (S misc) Certain operations make no sense with negative arguments. Warning is given and the operation is not done. =item write() on closed filehandle %s (W closed) The filehandle you're writing to got itself closed sometime before now. Check your control flow. =item %s "\x%X" does not map to Unicode (S utf8) When reading in different encodings, Perl tries to map everything into Unicode characters. The bytes you read in are not legal in this encoding. For example utf8 "\xE4" does not map to Unicode if you try to read in the a-diaereses Latin-1 as UTF-8. =item 'X' outside of string (F) You had a (un)pack template that specified a relative position before the beginning of the string being (un)packed. See L<perlfunc/pack>. =item 'x' outside of string in unpack (F) You had a pack template that specified a relative position after the end of the string being unpacked. See L<perlfunc/pack>. =item YOU HAVEN'T DISABLED SET-ID SCRIPTS IN THE KERNEL YET! (F) And you probably never will, because you probably don't have the sources to your kernel, and your vendor probably doesn't give a rip about what you want. There is a vulnerability anywhere that you have a set-id script, and to close it you need to remove the set-id bit from the script that you're attempting to run. To actually run the script set-id, your best bet is to put a set-id C wrapper around your script. =item You need to quote "%s" (W syntax) You assigned a bareword as a signal handler name. Unfortunately, you already have a subroutine of that name declared, which means that Perl 5 will try to call the subroutine when the assignment is executed, which is probably not what you want. (If it IS what you want, put an & in front.) =item Your random numbers are not that random (F) When trying to initialize the random seed for hashes, Perl could not get any randomness out of your system. This usually indicates Something Very Wrong. =item Zero length \N{} in regex; marked by S<<-- HERE> in m/%s/ (F) Named Unicode character escapes (C<\N{...}>) may return a zero-length sequence. Such an escape was used in an extended character class, i.e. C<(?[...])>, or under C<use re 'strict'>, which is not permitted. Check that the correct escape has been used, and the correct charnames handler is in scope. The S<<-- HERE> shows whereabouts in the regular expression the problem was discovered. =back =head1 SEE ALSO L<warnings>, L<diagnostics>. =cut perl5161delta.pod 0000644 00000013776 15125556335 0007571 0 ustar 00 =encoding utf8 =head1 NAME perl5161delta - what is new for perl v5.16.1 =head1 DESCRIPTION This document describes differences between the 5.16.0 release and the 5.16.1 release. If you are upgrading from an earlier release such as 5.14.0, first read L<perl5160delta>, which describes differences between 5.14.0 and 5.16.0. =head1 Security =head2 an off-by-two error in Scalar-List-Util has been fixed The bugfix was in Scalar-List-Util 1.23_04, and perl 5.16.1 includes Scalar-List-Util 1.25. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.16.0 If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Scalar::Util> and L<List::Util> have been upgraded from version 1.23 to version 1.25. =item * L<B::Deparse> has been updated from version 1.14 to 1.14_01. An "uninitialized" warning emitted by B::Deparse has been squashed [perl #113464]. =back =head1 Configuration and Compilation =over =item * Building perl with some Windows compilers used to fail due to a problem with miniperl's C<glob> operator (which uses the C<perlglob> program) deleting the PATH environment variable [perl #113798]. =back =head1 Platform Support =head2 Platform-Specific Notes =over 4 =item VMS All C header files from the top-level directory of the distribution are now installed on VMS, providing consistency with a long-standing practice on other platforms. Previously only a subset were installed, which broke non-core extension builds for extensions that depended on the missing include files. =back =head1 Selected Bug Fixes =over 4 =item * A regression introduced in Perl v5.16.0 involving C<tr/I<SEARCHLIST>/I<REPLACEMENTLIST>/> has been fixed. Only the first instance is supposed to be meaningful if a character appears more than once in C<I<SEARCHLIST>>. Under some circumstances, the final instance was overriding all earlier ones. [perl #113584] =item * C<B::COP::stashlen> has been added. This provides access to an internal field added in perl 5.16 under threaded builds. It was broken at the last minute before 5.16 was released [perl #113034]. =item * The L<re> pragma will no longer clobber C<$_>. [perl #113750] =item * Unicode 6.1 published an incorrect alias for one of the Canonical_Combining_Class property's values (which range between 0 and 254). The alias C<CCC133> should have been C<CCC132>. Perl now overrides the data file furnished by Unicode to give the correct value. =item * Duplicating scalar filehandles works again. [perl #113764] =item * Under threaded perls, a runtime code block in a regular expression could corrupt the package name stored in the op tree, resulting in bad reads in C<caller>, and possibly crashes [perl #113060]. =item * For efficiency's sake, many operators and built-in functions return the same scalar each time. Lvalue subroutines and subroutines in the CORE:: namespace were allowing this implementation detail to leak through. C<print &CORE::uc("a"), &CORE::uc("b")> used to print "BB". The same thing would happen with an lvalue subroutine returning the return value of C<uc>. Now the value is copied in such cases [perl #113044]. =item * C<__SUB__> now works in special blocks (C<BEGIN>, C<END>, etc.). =item * Formats that reference lexical variables from outside no longer result in crashes. =back =head1 Known Problems There are no new known problems, but consult L<perl5160delta/Known Problems> to see those identified in the 5.16.0 release. =head1 Acknowledgements Perl 5.16.1 represents approximately 2 months of development since Perl 5.16.0 and contains approximately 14,000 lines of changes across 96 files from 8 authors. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.16.1: Chris 'BinGOs' Williams, Craig A. Berry, Father Chrysostomos, Karl Williamson, Paul Johnson, Reini Urban, Ricardo Signes, Tony Cook. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlobj.pod 0000644 00000105605 15125556335 0006726 0 ustar 00 =encoding utf8 =for comment Consistent formatting of this file is achieved with: perl ./Porting/podtidy pod/perlobj.pod =head1 NAME X<object> X<OOP> perlobj - Perl object reference =head1 DESCRIPTION This document provides a reference for Perl's object orientation features. If you're looking for an introduction to object-oriented programming in Perl, please see L<perlootut>. In order to understand Perl objects, you first need to understand references in Perl. See L<perlreftut> for details. This document describes all of Perl's object-oriented (OO) features from the ground up. If you're just looking to write some object-oriented code of your own, you are probably better served by using one of the object systems from CPAN described in L<perlootut>. If you're looking to write your own object system, or you need to maintain code which implements objects from scratch then this document will help you understand exactly how Perl does object orientation. There are a few basic principles which define object oriented Perl: =over 4 =item 1. An object is simply a data structure that knows to which class it belongs. =item 2. A class is simply a package. A class provides methods that expect to operate on objects. =item 3. A method is simply a subroutine that expects a reference to an object (or a package name, for class methods) as the first argument. =back Let's look at each of these principles in depth. =head2 An Object is Simply a Data Structure X<object> X<bless> X<constructor> X<new> Unlike many other languages which support object orientation, Perl does not provide any special syntax for constructing an object. Objects are merely Perl data structures (hashes, arrays, scalars, filehandles, etc.) that have been explicitly associated with a particular class. That explicit association is created by the built-in C<bless> function, which is typically used within the I<constructor> subroutine of the class. Here is a simple constructor: package File; sub new { my $class = shift; return bless {}, $class; } The name C<new> isn't special. We could name our constructor something else: package File; sub load { my $class = shift; return bless {}, $class; } The modern convention for OO modules is to always use C<new> as the name for the constructor, but there is no requirement to do so. Any subroutine that blesses a data structure into a class is a valid constructor in Perl. In the previous examples, the C<{}> code creates a reference to an empty anonymous hash. The C<bless> function then takes that reference and associates the hash with the class in C<$class>. In the simplest case, the C<$class> variable will end up containing the string "File". We can also use a variable to store a reference to the data structure that is being blessed as our object: sub new { my $class = shift; my $self = {}; bless $self, $class; return $self; } Once we've blessed the hash referred to by C<$self> we can start calling methods on it. This is useful if you want to put object initialization in its own separate method: sub new { my $class = shift; my $self = {}; bless $self, $class; $self->_initialize(); return $self; } Since the object is also a hash, you can treat it as one, using it to store data associated with the object. Typically, code inside the class can treat the hash as an accessible data structure, while code outside the class should always treat the object as opaque. This is called B<encapsulation>. Encapsulation means that the user of an object does not have to know how it is implemented. The user simply calls documented methods on the object. Note, however, that (unlike most other OO languages) Perl does not ensure or enforce encapsulation in any way. If you want objects to actually I<be> opaque you need to arrange for that yourself. This can be done in a variety of ways, including using L</"Inside-Out objects"> or modules from CPAN. =head3 Objects Are Blessed; Variables Are Not When we bless something, we are not blessing the variable which contains a reference to that thing, nor are we blessing the reference that the variable stores; we are blessing the thing that the variable refers to (sometimes known as the I<referent>). This is best demonstrated with this code: use Scalar::Util 'blessed'; my $foo = {}; my $bar = $foo; bless $foo, 'Class'; print blessed( $bar ) // 'not blessed'; # prints "Class" $bar = "some other value"; print blessed( $bar ) // 'not blessed'; # prints "not blessed" When we call C<bless> on a variable, we are actually blessing the underlying data structure that the variable refers to. We are not blessing the reference itself, nor the variable that contains that reference. That's why the second call to C<blessed( $bar )> returns false. At that point C<$bar> is no longer storing a reference to an object. You will sometimes see older books or documentation mention "blessing a reference" or describe an object as a "blessed reference", but this is incorrect. It isn't the reference that is blessed as an object; it's the thing the reference refers to (i.e. the referent). =head2 A Class is Simply a Package X<class> X<package> X<@ISA> X<inheritance> Perl does not provide any special syntax for class definitions. A package is simply a namespace containing variables and subroutines. The only difference is that in a class, the subroutines may expect a reference to an object or the name of a class as the first argument. This is purely a matter of convention, so a class may contain both methods and subroutines which I<don't> operate on an object or class. Each package contains a special array called C<@ISA>. The C<@ISA> array contains a list of that class's parent classes, if any. This array is examined when Perl does method resolution, which we will cover later. Calling methods from a package means it must be loaded, of course, so you will often want to load a module and add it to C<@ISA> at the same time. You can do so in a single step using the L<parent> pragma. (In older code you may encounter the L<base> pragma, which is nowadays discouraged except when you have to work with the equally discouraged L<fields> pragma.) However the parent classes are set, the package's C<@ISA> variable will contain a list of those parents. This is simply a list of scalars, each of which is a string that corresponds to a package name. All classes inherit from the L<UNIVERSAL> class implicitly. The L<UNIVERSAL> class is implemented by the Perl core, and provides several default methods, such as C<isa()>, C<can()>, and C<VERSION()>. The C<UNIVERSAL> class will I<never> appear in a package's C<@ISA> variable. Perl I<only> provides method inheritance as a built-in feature. Attribute inheritance is left up the class to implement. See the L</Writing Accessors> section for details. =head2 A Method is Simply a Subroutine X<method> Perl does not provide any special syntax for defining a method. A method is simply a regular subroutine, and is declared with C<sub>. What makes a method special is that it expects to receive either an object or a class name as its first argument. Perl I<does> provide special syntax for method invocation, the C<< -> >> operator. We will cover this in more detail later. Most methods you write will expect to operate on objects: sub save { my $self = shift; open my $fh, '>', $self->path() or die $!; print {$fh} $self->data() or die $!; close $fh or die $!; } =head2 Method Invocation X<invocation> X<method> X<arrow> X<< -> >> Calling a method on an object is written as C<< $object->method >>. The left hand side of the method invocation (or arrow) operator is the object (or class name), and the right hand side is the method name. my $pod = File->new( 'perlobj.pod', $data ); $pod->save(); The C<< -> >> syntax is also used when dereferencing a reference. It looks like the same operator, but these are two different operations. When you call a method, the thing on the left side of the arrow is passed as the first argument to the method. That means when we call C<< Critter->new() >>, the C<new()> method receives the string C<"Critter"> as its first argument. When we call C<< $fred->speak() >>, the C<$fred> variable is passed as the first argument to C<speak()>. Just as with any Perl subroutine, all of the arguments passed in C<@_> are aliases to the original argument. This includes the object itself. If you assign directly to C<$_[0]> you will change the contents of the variable that holds the reference to the object. We recommend that you don't do this unless you know exactly what you're doing. Perl knows what package the method is in by looking at the left side of the arrow. If the left hand side is a package name, it looks for the method in that package. If the left hand side is an object, then Perl looks for the method in the package that the object has been blessed into. If the left hand side is neither a package name nor an object, then the method call will cause an error, but see the section on L</Method Call Variations> for more nuances. =head2 Inheritance X<inheritance> We already talked about the special C<@ISA> array and the L<parent> pragma. When a class inherits from another class, any methods defined in the parent class are available to the child class. If you attempt to call a method on an object that isn't defined in its own class, Perl will also look for that method in any parent classes it may have. package File::MP3; use parent 'File'; # sets @File::MP3::ISA = ('File'); my $mp3 = File::MP3->new( 'Andvari.mp3', $data ); $mp3->save(); Since we didn't define a C<save()> method in the C<File::MP3> class, Perl will look at the C<File::MP3> class's parent classes to find the C<save()> method. If Perl cannot find a C<save()> method anywhere in the inheritance hierarchy, it will die. In this case, it finds a C<save()> method in the C<File> class. Note that the object passed to C<save()> in this case is still a C<File::MP3> object, even though the method is found in the C<File> class. We can override a parent's method in a child class. When we do so, we can still call the parent class's method with the C<SUPER> pseudo-class. sub save { my $self = shift; say 'Prepare to rock'; $self->SUPER::save(); } The C<SUPER> modifier can I<only> be used for method calls. You can't use it for regular subroutine calls or class methods: SUPER::save($thing); # FAIL: looks for save() sub in package SUPER SUPER->save($thing); # FAIL: looks for save() method in class # SUPER $thing->SUPER::save(); # Okay: looks for save() method in parent # classes =head3 How SUPER is Resolved X<SUPER> The C<SUPER> pseudo-class is resolved from the package where the call is made. It is I<not> resolved based on the object's class. This is important, because it lets methods at different levels within a deep inheritance hierarchy each correctly call their respective parent methods. package A; sub new { return bless {}, shift; } sub speak { my $self = shift; say 'A'; } package B; use parent -norequire, 'A'; sub speak { my $self = shift; $self->SUPER::speak(); say 'B'; } package C; use parent -norequire, 'B'; sub speak { my $self = shift; $self->SUPER::speak(); say 'C'; } my $c = C->new(); $c->speak(); In this example, we will get the following output: A B C This demonstrates how C<SUPER> is resolved. Even though the object is blessed into the C<C> class, the C<speak()> method in the C<B> class can still call C<SUPER::speak()> and expect it to correctly look in the parent class of C<B> (i.e the class the method call is in), not in the parent class of C<C> (i.e. the class the object belongs to). There are rare cases where this package-based resolution can be a problem. If you copy a subroutine from one package to another, C<SUPER> resolution will be done based on the original package. =head3 Multiple Inheritance X<multiple inheritance> Multiple inheritance often indicates a design problem, but Perl always gives you enough rope to hang yourself with if you ask for it. To declare multiple parents, you simply need to pass multiple class names to C<use parent>: package MultiChild; use parent 'Parent1', 'Parent2'; =head3 Method Resolution Order X<method resolution order> X<mro> Method resolution order only matters in the case of multiple inheritance. In the case of single inheritance, Perl simply looks up the inheritance chain to find a method: Grandparent | Parent | Child If we call a method on a C<Child> object and that method is not defined in the C<Child> class, Perl will look for that method in the C<Parent> class and then, if necessary, in the C<Grandparent> class. If Perl cannot find the method in any of these classes, it will die with an error message. When a class has multiple parents, the method lookup order becomes more complicated. By default, Perl does a depth-first left-to-right search for a method. That means it starts with the first parent in the C<@ISA> array, and then searches all of its parents, grandparents, etc. If it fails to find the method, it then goes to the next parent in the original class's C<@ISA> array and searches from there. SharedGreatGrandParent / \ PaternalGrandparent MaternalGrandparent \ / Father Mother \ / Child So given the diagram above, Perl will search C<Child>, C<Father>, C<PaternalGrandparent>, C<SharedGreatGrandParent>, C<Mother>, and finally C<MaternalGrandparent>. This may be a problem because now we're looking in C<SharedGreatGrandParent> I<before> we've checked all its derived classes (i.e. before we tried C<Mother> and C<MaternalGrandparent>). It is possible to ask for a different method resolution order with the L<mro> pragma. package Child; use mro 'c3'; use parent 'Father', 'Mother'; This pragma lets you switch to the "C3" resolution order. In simple terms, "C3" order ensures that shared parent classes are never searched before child classes, so Perl will now search: C<Child>, C<Father>, C<PaternalGrandparent>, C<Mother> C<MaternalGrandparent>, and finally C<SharedGreatGrandParent>. Note however that this is not "breadth-first" searching: All the C<Father> ancestors (except the common ancestor) are searched before any of the C<Mother> ancestors are considered. The C3 order also lets you call methods in sibling classes with the C<next> pseudo-class. See the L<mro> documentation for more details on this feature. =head3 Method Resolution Caching When Perl searches for a method, it caches the lookup so that future calls to the method do not need to search for it again. Changing a class's parent class or adding subroutines to a class will invalidate the cache for that class. The L<mro> pragma provides some functions for manipulating the method cache directly. =head2 Writing Constructors X<constructor> As we mentioned earlier, Perl provides no special constructor syntax. This means that a class must implement its own constructor. A constructor is simply a class method that returns a reference to a new object. The constructor can also accept additional parameters that define the object. Let's write a real constructor for the C<File> class we used earlier: package File; sub new { my $class = shift; my ( $path, $data ) = @_; my $self = bless { path => $path, data => $data, }, $class; return $self; } As you can see, we've stored the path and file data in the object itself. Remember, under the hood, this object is still just a hash. Later, we'll write accessors to manipulate this data. For our C<File::MP3> class, we can check to make sure that the path we're given ends with ".mp3": package File::MP3; sub new { my $class = shift; my ( $path, $data ) = @_; die "You cannot create a File::MP3 without an mp3 extension\n" unless $path =~ /\.mp3\z/; return $class->SUPER::new(@_); } This constructor lets its parent class do the actual object construction. =head2 Attributes X<attribute> An attribute is a piece of data belonging to a particular object. Unlike most object-oriented languages, Perl provides no special syntax or support for declaring and manipulating attributes. Attributes are often stored in the object itself. For example, if the object is an anonymous hash, we can store the attribute values in the hash using the attribute name as the key. While it's possible to refer directly to these hash keys outside of the class, it's considered a best practice to wrap all access to the attribute with accessor methods. This has several advantages. Accessors make it easier to change the implementation of an object later while still preserving the original API. An accessor lets you add additional code around attribute access. For example, you could apply a default to an attribute that wasn't set in the constructor, or you could validate that a new value for the attribute is acceptable. Finally, using accessors makes inheritance much simpler. Subclasses can use the accessors rather than having to know how a parent class is implemented internally. =head3 Writing Accessors X<accessor> As with constructors, Perl provides no special accessor declaration syntax, so classes must provide explicitly written accessor methods. There are two common types of accessors, read-only and read-write. A simple read-only accessor simply gets the value of a single attribute: sub path { my $self = shift; return $self->{path}; } A read-write accessor will allow the caller to set the value as well as get it: sub path { my $self = shift; if (@_) { $self->{path} = shift; } return $self->{path}; } =head2 An Aside About Smarter and Safer Code Our constructor and accessors are not very smart. They don't check that a C<$path> is defined, nor do they check that a C<$path> is a valid filesystem path. Doing these checks by hand can quickly become tedious. Writing a bunch of accessors by hand is also incredibly tedious. There are a lot of modules on CPAN that can help you write safer and more concise code, including the modules we recommend in L<perlootut>. =head2 Method Call Variations X<method> Perl supports several other ways to call methods besides the C<< $object->method() >> usage we've seen so far. =head3 Method Names with a Fully Qualified Name Perl allows you to call methods using their fully qualified name (the package and method name): my $mp3 = File::MP3->new( 'Regin.mp3', $data ); $mp3->File::save(); When you call a fully qualified method name like C<File::save>, the method resolution search for the C<save> method starts in the C<File> class, skipping any C<save> method the C<File::MP3> class may have defined. It still searches the C<File> class's parents if necessary. While this feature is most commonly used to explicitly call methods inherited from an ancestor class, there is no technical restriction that enforces this: my $obj = Tree->new(); $obj->Dog::bark(); This calls the C<bark> method from class C<Dog> on an object of class C<Tree>, even if the two classes are completely unrelated. Use this with great care. The C<SUPER> pseudo-class that was described earlier is I<not> the same as calling a method with a fully-qualified name. See the earlier L</Inheritance> section for details. =head3 Method Names as Strings Perl lets you use a scalar variable containing a string as a method name: my $file = File->new( $path, $data ); my $method = 'save'; $file->$method(); This works exactly like calling C<< $file->save() >>. This can be very useful for writing dynamic code. For example, it allows you to pass a method name to be called as a parameter to another method. =head3 Class Names as Strings Perl also lets you use a scalar containing a string as a class name: my $class = 'File'; my $file = $class->new( $path, $data ); Again, this allows for very dynamic code. =head3 Subroutine References as Methods You can also use a subroutine reference as a method: my $sub = sub { my $self = shift; $self->save(); }; $file->$sub(); This is exactly equivalent to writing C<< $sub->($file) >>. You may see this idiom in the wild combined with a call to C<can>: if ( my $meth = $object->can('foo') ) { $object->$meth(); } =head3 Dereferencing Method Call Perl also lets you use a dereferenced scalar reference in a method call. That's a mouthful, so let's look at some code: $file->${ \'save' }; $file->${ returns_scalar_ref() }; $file->${ \( returns_scalar() ) }; $file->${ returns_ref_to_sub_ref() }; This works if the dereference produces a string I<or> a subroutine reference. =head3 Method Calls on Filehandles Under the hood, Perl filehandles are instances of the C<IO::Handle> or C<IO::File> class. Once you have an open filehandle, you can call methods on it. Additionally, you can call methods on the C<STDIN>, C<STDOUT>, and C<STDERR> filehandles. open my $fh, '>', 'path/to/file'; $fh->autoflush(); $fh->print('content'); STDOUT->autoflush(); =head2 Invoking Class Methods X<invocation> Because Perl allows you to use barewords for package names and subroutine names, it sometimes interprets a bareword's meaning incorrectly. For example, the construct C<< Class->new() >> can be interpreted as either C<< 'Class'->new() >> or C<< Class()->new() >>. In English, that second interpretation reads as "call a subroutine named Class(), then call new() as a method on the return value of Class()". If there is a subroutine named C<Class()> in the current namespace, Perl will always interpret C<< Class->new() >> as the second alternative: a call to C<new()> on the object returned by a call to C<Class()> You can force Perl to use the first interpretation (i.e. as a method call on the class named "Class") in two ways. First, you can append a C<::> to the class name: Class::->new() Perl will always interpret this as a method call. Alternatively, you can quote the class name: 'Class'->new() Of course, if the class name is in a scalar Perl will do the right thing as well: my $class = 'Class'; $class->new(); =head3 Indirect Object Syntax X<indirect object> B<Outside of the file handle case, use of this syntax is discouraged as it can confuse the Perl interpreter. See below for more details.> Perl supports another method invocation syntax called "indirect object" notation. This syntax is called "indirect" because the method comes before the object it is being invoked on. This syntax can be used with any class or object method: my $file = new File $path, $data; save $file; We recommend that you avoid this syntax, for several reasons. First, it can be confusing to read. In the above example, it's not clear if C<save> is a method provided by the C<File> class or simply a subroutine that expects a file object as its first argument. When used with class methods, the problem is even worse. Because Perl allows subroutine names to be written as barewords, Perl has to guess whether the bareword after the method is a class name or subroutine name. In other words, Perl can resolve the syntax as either C<< File->new( $path, $data ) >> B<or> C<< new( File( $path, $data ) ) >>. To parse this code, Perl uses a heuristic based on what package names it has seen, what subroutines exist in the current package, what barewords it has previously seen, and other input. Needless to say, heuristics can produce very surprising results! Older documentation (and some CPAN modules) encouraged this syntax, particularly for constructors, so you may still find it in the wild. However, we encourage you to avoid using it in new code. You can force Perl to interpret the bareword as a class name by appending "::" to it, like we saw earlier: my $file = new File:: $path, $data; =head2 C<bless>, C<blessed>, and C<ref> As we saw earlier, an object is simply a data structure that has been blessed into a class via the C<bless> function. The C<bless> function can take either one or two arguments: my $object = bless {}, $class; my $object = bless {}; In the first form, the anonymous hash is being blessed into the class in C<$class>. In the second form, the anonymous hash is blessed into the current package. The second form is strongly discouraged, because it breaks the ability of a subclass to reuse the parent's constructor, but you may still run across it in existing code. If you want to know whether a particular scalar refers to an object, you can use the C<blessed> function exported by L<Scalar::Util>, which is shipped with the Perl core. use Scalar::Util 'blessed'; if ( defined blessed($thing) ) { ... } If C<$thing> refers to an object, then this function returns the name of the package the object has been blessed into. If C<$thing> doesn't contain a reference to a blessed object, the C<blessed> function returns C<undef>. Note that C<blessed($thing)> will also return false if C<$thing> has been blessed into a class named "0". This is a possible, but quite pathological. Don't create a class named "0" unless you know what you're doing. Similarly, Perl's built-in C<ref> function treats a reference to a blessed object specially. If you call C<ref($thing)> and C<$thing> holds a reference to an object, it will return the name of the class that the object has been blessed into. If you simply want to check that a variable contains an object reference, we recommend that you use C<defined blessed($object)>, since C<ref> returns true values for all references, not just objects. =head2 The UNIVERSAL Class X<UNIVERSAL> All classes automatically inherit from the L<UNIVERSAL> class, which is built-in to the Perl core. This class provides a number of methods, all of which can be called on either a class or an object. You can also choose to override some of these methods in your class. If you do so, we recommend that you follow the built-in semantics described below. =over 4 =item isa($class) X<isa> The C<isa> method returns I<true> if the object is a member of the class in C<$class>, or a member of a subclass of C<$class>. If you override this method, it should never throw an exception. =item DOES($role) X<DOES> The C<DOES> method returns I<true> if its object claims to perform the role C<$role>. By default, this is equivalent to C<isa>. This method is provided for use by object system extensions that implement roles, like C<Moose> and C<Role::Tiny>. You can also override C<DOES> directly in your own classes. If you override this method, it should never throw an exception. =item can($method) X<can> The C<can> method checks to see if the class or object it was called on has a method named C<$method>. This checks for the method in the class and all of its parents. If the method exists, then a reference to the subroutine is returned. If it does not then C<undef> is returned. If your class responds to method calls via C<AUTOLOAD>, you may want to overload C<can> to return a subroutine reference for methods which your C<AUTOLOAD> method handles. If you override this method, it should never throw an exception. =item VERSION($need) X<VERSION> The C<VERSION> method returns the version number of the class (package). If the C<$need> argument is given then it will check that the current version (as defined by the $VERSION variable in the package) is greater than or equal to C<$need>; it will die if this is not the case. This method is called automatically by the C<VERSION> form of C<use>. use Package 1.2 qw(some imported subs); # implies: Package->VERSION(1.2); We recommend that you use this method to access another package's version, rather than looking directly at C<$Package::VERSION>. The package you are looking at could have overridden the C<VERSION> method. We also recommend using this method to check whether a module has a sufficient version. The internal implementation uses the L<version> module to make sure that different types of version numbers are compared correctly. =back =head2 AUTOLOAD X<AUTOLOAD> If you call a method that doesn't exist in a class, Perl will throw an error. However, if that class or any of its parent classes defines an C<AUTOLOAD> method, that C<AUTOLOAD> method is called instead. C<AUTOLOAD> is called as a regular method, and the caller will not know the difference. Whatever value your C<AUTOLOAD> method returns is returned to the caller. The fully qualified method name that was called is available in the C<$AUTOLOAD> package global for your class. Since this is a global, if you want to refer to do it without a package name prefix under C<strict 'vars'>, you need to declare it. # XXX - this is a terrible way to implement accessors, but it makes # for a simple example. our $AUTOLOAD; sub AUTOLOAD { my $self = shift; # Remove qualifier from original method name... my $called = $AUTOLOAD =~ s/.*:://r; # Is there an attribute of that name? die "No such attribute: $called" unless exists $self->{$called}; # If so, return it... return $self->{$called}; } sub DESTROY { } # see below Without the C<our $AUTOLOAD> declaration, this code will not compile under the L<strict> pragma. As the comment says, this is not a good way to implement accessors. It's slow and too clever by far. However, you may see this as a way to provide accessors in older Perl code. See L<perlootut> for recommendations on OO coding in Perl. If your class does have an C<AUTOLOAD> method, we strongly recommend that you override C<can> in your class as well. Your overridden C<can> method should return a subroutine reference for any method that your C<AUTOLOAD> responds to. =head2 Destructors X<destructor> X<DESTROY> When the last reference to an object goes away, the object is destroyed. If you only have one reference to an object stored in a lexical scalar, the object is destroyed when that scalar goes out of scope. If you store the object in a package global, that object may not go out of scope until the program exits. If you want to do something when the object is destroyed, you can define a C<DESTROY> method in your class. This method will always be called by Perl at the appropriate time, unless the method is empty. This is called just like any other method, with the object as the first argument. It does not receive any additional arguments. However, the C<$_[0]> variable will be read-only in the destructor, so you cannot assign a value to it. If your C<DESTROY> method throws an exception, this will not cause any control transfer beyond exiting the method. The exception will be reported to C<STDERR> as a warning, marked "(in cleanup)", and Perl will continue with whatever it was doing before. Because C<DESTROY> methods can be called at any time, you should localize any global status variables that might be set by anything you do in your C<DESTROY> method. If you are in doubt about a particular status variable, it doesn't hurt to localize it. There are five global status variables, and the safest way is to localize all five of them: sub DESTROY { local($., $@, $!, $^E, $?); my $self = shift; ...; } If you define an C<AUTOLOAD> in your class, then Perl will call your C<AUTOLOAD> to handle the C<DESTROY> method. You can prevent this by defining an empty C<DESTROY>, like we did in the autoloading example. You can also check the value of C<$AUTOLOAD> and return without doing anything when called to handle C<DESTROY>. =head3 Global Destruction The order in which objects are destroyed during the global destruction before the program exits is unpredictable. This means that any objects contained by your object may already have been destroyed. You should check that a contained object is defined before calling a method on it: sub DESTROY { my $self = shift; $self->{handle}->close() if $self->{handle}; } You can use the C<${^GLOBAL_PHASE}> variable to detect if you are currently in the global destruction phase: sub DESTROY { my $self = shift; return if ${^GLOBAL_PHASE} eq 'DESTRUCT'; $self->{handle}->close(); } Note that this variable was added in Perl 5.14.0. If you want to detect the global destruction phase on older versions of Perl, you can use the C<Devel::GlobalDestruction> module on CPAN. If your C<DESTROY> method issues a warning during global destruction, the Perl interpreter will append the string " during global destruction" to the warning. During global destruction, Perl will always garbage collect objects before unblessed references. See L<perlhacktips/PERL_DESTRUCT_LEVEL> for more information about global destruction. =head2 Non-Hash Objects All the examples so far have shown objects based on a blessed hash. However, it's possible to bless any type of data structure or referent, including scalars, globs, and subroutines. You may see this sort of thing when looking at code in the wild. Here's an example of a module as a blessed scalar: package Time; use strict; use warnings; sub new { my $class = shift; my $time = time; return bless \$time, $class; } sub epoch { my $self = shift; return ${ $self }; } my $time = Time->new(); print $time->epoch(); =head2 Inside-Out objects In the past, the Perl community experimented with a technique called "inside-out objects". An inside-out object stores its data outside of the object's reference, indexed on a unique property of the object, such as its memory address, rather than in the object itself. This has the advantage of enforcing the encapsulation of object attributes, since their data is not stored in the object itself. This technique was popular for a while (and was recommended in Damian Conway's I<Perl Best Practices>), but never achieved universal adoption. The L<Object::InsideOut> module on CPAN provides a comprehensive implementation of this technique, and you may see it or other inside-out modules in the wild. Here is a simple example of the technique, using the L<Hash::Util::FieldHash> core module. This module was added to the core to support inside-out object implementations. package Time; use strict; use warnings; use Hash::Util::FieldHash 'fieldhash'; fieldhash my %time_for; sub new { my $class = shift; my $self = bless \( my $object ), $class; $time_for{$self} = time; return $self; } sub epoch { my $self = shift; return $time_for{$self}; } my $time = Time->new; print $time->epoch; =head2 Pseudo-hashes The pseudo-hash feature was an experimental feature introduced in earlier versions of Perl and removed in 5.10.0. A pseudo-hash is an array reference which can be accessed using named keys like a hash. You may run in to some code in the wild which uses it. See the L<fields> pragma for more information. =head1 SEE ALSO A kinder, gentler tutorial on object-oriented programming in Perl can be found in L<perlootut>. You should also check out L<perlmodlib> for some style guides on constructing both modules and classes. perldos.pod 0000644 00000024432 15125556335 0006737 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see perlpod manpage) which is specially designed to be readable as is. =head1 NAME perldos - Perl under DOS, W31, W95. =head1 SYNOPSIS These are instructions for building Perl under DOS (or w??), using DJGPP v2.03 or later. Under w95 long filenames are supported. =head1 DESCRIPTION Before you start, you should glance through the README file found in the top-level directory where the Perl distribution was extracted. Make sure you read and understand the terms under which this software is being distributed. This port currently supports MakeMaker (the set of modules that is used to build extensions to perl). Therefore, you should be able to build and install most extensions found in the CPAN sites. Detailed instructions on how to build and install perl extension modules, including XS-type modules, is included. See 'BUILDING AND INSTALLING MODULES'. =head2 Prerequisites for Compiling Perl on DOS =over 4 =item DJGPP DJGPP is a port of GNU C/C++ compiler and development tools to 32-bit, protected-mode environment on Intel 32-bit CPUs running MS-DOS and compatible operating systems, by DJ Delorie <dj@delorie.com> and friends. For more details (FAQ), check out the home of DJGPP at: http://www.delorie.com/djgpp/ If you have questions about DJGPP, try posting to the DJGPP newsgroup: comp.os.msdos.djgpp, or use the email gateway djgpp@delorie.com. You can find the full DJGPP distribution on any of the mirrors listed here: http://www.delorie.com/djgpp/getting.html You need the following files to build perl (or add new modules): v2/djdev203.zip v2gnu/bnu2112b.zip v2gnu/gcc2953b.zip v2gnu/bsh204b.zip v2gnu/mak3791b.zip v2gnu/fil40b.zip v2gnu/sed3028b.zip v2gnu/txt20b.zip v2gnu/dif272b.zip v2gnu/grep24b.zip v2gnu/shl20jb.zip v2gnu/gwk306b.zip v2misc/csdpmi5b.zip or possibly any newer version. =item Pthreads Thread support is not tested in this version of the djgpp perl. =back =head2 Shortcomings of Perl under DOS Perl under DOS lacks some features of perl under UNIX because of deficiencies in the UNIX-emulation, most notably: =over 4 =item * fork() and pipe() =item * some features of the UNIX filesystem regarding link count and file dates =item * in-place operation is a little bit broken with short filenames =item * sockets =back =head2 Building Perl on DOS =over 4 =item * Unpack the source package F<perl5.8*.tar.gz> with djtarx. If you want to use long file names under w95 and also to get Perl to pass all its tests, don't forget to use set LFN=y set FNCASE=y before unpacking the archive. =item * Create a "symlink" or copy your bash.exe to sh.exe in your C<($DJDIR)/bin> directory. ln -s bash.exe sh.exe [If you have the recommended version of bash for DJGPP, this is already done for you.] And make the C<SHELL> environment variable point to this F<sh.exe>: set SHELL=c:/djgpp/bin/sh.exe (use full path name!) You can do this in F<djgpp.env> too. Add this line BEFORE any section definition: +SHELL=%DJDIR%/bin/sh.exe =item * If you have F<split.exe> and F<gsplit.exe> in your path, then rename F<split.exe> to F<djsplit.exe>, and F<gsplit.exe> to F<split.exe>. Copy or link F<gecho.exe> to F<echo.exe> if you don't have F<echo.exe>. Copy or link F<gawk.exe> to F<awk.exe> if you don't have F<awk.exe>. [If you have the recommended versions of djdev, shell utilities and gawk, all these are already done for you, and you will not need to do anything.] =item * Chdir to the djgpp subdirectory of perl toplevel and type the following commands: set FNCASE=y configure.bat This will do some preprocessing then run the Configure script for you. The Configure script is interactive, but in most cases you just need to press ENTER. The "set" command ensures that DJGPP preserves the letter case of file names when reading directories. If you already issued this set command when unpacking the archive, and you are in the same DOS session as when you unpacked the archive, you don't have to issue the set command again. This command is necessary *before* you start to (re)configure or (re)build perl in order to ensure both that perl builds correctly and that building XS-type modules can succeed. See the DJGPP info entry for "_preserve_fncase" for more information: info libc alphabetical _preserve_fncase If the script says that your package is incomplete, and asks whether to continue, just answer with Y (this can only happen if you don't use long filenames or forget to issue "set FNCASE=y" first). When Configure asks about the extensions, I suggest IO and Fcntl, and if you want database handling then SDBM_File or GDBM_File (you need to install gdbm for this one). If you want to use the POSIX extension (this is the default), make sure that the stack size of your F<cc1.exe> is at least 512kbyte (you can check this with: C<stubedit cc1.exe>). You can use the Configure script in non-interactive mode too. When I built my F<perl.exe>, I used something like this: configure.bat -des You can find more info about Configure's command line switches in the F<INSTALL> file. When the script ends, and you want to change some values in the generated F<config.sh> file, then run sh Configure -S after you made your modifications. IMPORTANT: if you use this C<-S> switch, be sure to delete the CONFIG environment variable before running the script: set CONFIG= =item * Now you can compile Perl. Type: make =back =head2 Testing Perl on DOS Type: make test If you're lucky you should see "All tests successful". But there can be a few failed subtests (less than 5 hopefully) depending on some external conditions (e.g. some subtests fail under linux/dosemu or plain dos with short filenames only). =head2 Installation of Perl on DOS Type: make install This will copy the newly compiled perl and libraries into your DJGPP directory structure. Perl.exe and the utilities go into C<($DJDIR)/bin>, and the library goes under C<($DJDIR)/lib/perl5>. The pod documentation goes under C<($DJDIR)/lib/perl5/pod>. =head1 BUILDING AND INSTALLING MODULES ON DOS =head2 Building Prerequisites for Perl on DOS For building and installing non-XS modules, all you need is a working perl under DJGPP. Non-XS modules do not require re-linking the perl binary, and so are simpler to build and install. XS-type modules do require re-linking the perl binary, because part of an XS module is written in "C", and has to be linked together with the perl binary to be executed. This is required because perl under DJGPP is built with the "static link" option, due to the lack of "dynamic linking" in the DJGPP environment. Because XS modules require re-linking of the perl binary, you need both the perl binary distribution and the perl source distribution to build an XS extension module. In addition, you will have to have built your perl binary from the source distribution so that all of the components of the perl binary are available for the required link step. =head2 Unpacking CPAN Modules on DOS First, download the module package from CPAN (e.g., the "Comma Separated Value" text package, Text-CSV-0.01.tar.gz). Then expand the contents of the package into some location on your disk. Most CPAN modules are built with an internal directory structure, so it is usually safe to expand it in the root of your DJGPP installation. Some people prefer to locate source trees under /usr/src (i.e., C<($DJDIR)/usr/src>), but you may put it wherever seems most logical to you, *EXCEPT* under the same directory as your perl source code. There are special rules that apply to modules which live in the perl source tree that do not apply to most of the modules in CPAN. Unlike other DJGPP packages, which are normal "zip" files, most CPAN module packages are "gzipped tarballs". Recent versions of WinZip will safely unpack and expand them, *UNLESS* they have zero-length files. It is a known WinZip bug (as of v7.0) that it will not extract zero-length files. From the command line, you can use the djtar utility provided with DJGPP to unpack and expand these files. For example: C:\djgpp>djtarx -v Text-CSV-0.01.tar.gz This will create the new directory C<($DJDIR)/Text-CSV-0.01>, filling it with the source for this module. =head2 Building Non-XS Modules on DOS To build a non-XS module, you can use the standard module-building instructions distributed with perl modules. perl Makefile.PL make make test make install This is sufficient because non-XS modules install only ".pm" files and (sometimes) pod and/or man documentation. No re-linking of the perl binary is needed to build, install or use non-XS modules. =head2 Building XS Modules on DOS To build an XS module, you must use the standard module-building instructions distributed with perl modules *PLUS* three extra instructions specific to the DJGPP "static link" build environment. set FNCASE=y perl Makefile.PL make make perl make test make -f Makefile.aperl inst_perl MAP_TARGET=perl.exe make install The first extra instruction sets DJGPP's FNCASE environment variable so that the new perl binary which you must build for an XS-type module will build correctly. The second extra instruction re-builds the perl binary in your module directory before you run "make test", so that you are testing with the new module code you built with "make". The third extra instruction installs the perl binary from your module directory into the standard DJGPP binary directory, C<($DJDIR)/bin>, replacing your previous perl binary. Note that the MAP_TARGET value *must* have the ".exe" extension or you will not create a "perl.exe" to replace the one in C<($DJDIR)/bin>. When you are done, the XS-module install process will have added information to your "perllocal" information telling that the perl binary has been replaced, and what module was installed. You can view this information at any time by using the command: perl -S perldoc perllocal =head1 AUTHOR Laszlo Molnar, F<laszlo.molnar@eth.ericsson.se> [Installing/building perl] Peter J. Farley III F<pjfarley@banet.net> [Building/installing modules] =head1 SEE ALSO perl(1). =cut perlmacosx.pod 0000644 00000027534 15125556335 0007452 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specially designed to be readable as is. =head1 NAME perlmacosx - Perl under Mac OS X =head1 SYNOPSIS This document briefly describes Perl under Mac OS X. curl -O https://www.cpan.org/src/perl-5.32.1.tar.gz tar -xzf perl-5.32.1.tar.gz cd perl-5.32.1 ./Configure -des -Dprefix=/usr/local/ make make test sudo make install =head1 DESCRIPTION The latest Perl release (5.32.1 as of this writing) builds without changes under all versions of Mac OS X from 10.3 "Panther" onwards. In order to build your own version of Perl you will need 'make', which is part of Apple's developer tools - also known as Xcode. From Mac OS X 10.7 "Lion" onwards, it can be downloaded separately as the 'Command Line Tools' bundle directly from L<https://developer.apple.com/downloads/> (you will need a free account to log in), or as a part of the Xcode suite, freely available at the App Store. Xcode is a pretty big app, so unless you already have it or really want it, you are advised to get the 'Command Line Tools' bundle separately from the link above. If you want to do it from within Xcode, go to Xcode -> Preferences -> Downloads and select the 'Command Line Tools' option. Between Mac OS X 10.3 "Panther" and 10.6 "Snow Leopard", the 'Command Line Tools' bundle was called 'unix tools', and was usually supplied with Mac OS install DVDs. Earlier Mac OS X releases (10.2 "Jaguar" and older) did not include a completely thread-safe libc, so threading is not fully supported. Also, earlier releases included a buggy libdb, so some of the DB_File tests are known to fail on those releases. =head2 Installation Prefix The default installation location for this release uses the traditional UNIX directory layout under /usr/local. This is the recommended location for most users, and will leave the Apple-supplied Perl and its modules undisturbed. Using an installation prefix of '/usr' will result in a directory layout that mirrors that of Apple's default Perl, with core modules stored in '/System/Library/Perl/${version}', CPAN modules stored in '/Library/Perl/${version}', and the addition of '/Network/Library/Perl/${version}' to @INC for modules that are stored on a file server and used by many Macs. =head2 SDK support First, export the path to the SDK into the build environment: export SDK=/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.8.sdk Please make sure the SDK version (i.e. the numbers right before '.sdk') matches your system's (in this case, Mac OS X 10.8 "Mountain Lion"), as it is possible to have more than one SDK installed. Also make sure the path exists in your system, and if it doesn't please make sure the SDK is properly installed, as it should come with the 'Command Line Tools' bundle mentioned above. Finally, if you have an older Mac OS X (10.6 "Snow Leopard" and below) running Xcode 4.2 or lower, the SDK path might be something like C<'/Developer/SDKs/MacOSX10.3.9.sdk'>. You can use the SDK by exporting some additions to Perl's 'ccflags' and '..flags' config variables: ./Configure -Accflags="-nostdinc -B$SDK/usr/include/gcc \ -B$SDK/usr/lib/gcc -isystem$SDK/usr/include \ -F$SDK/System/Library/Frameworks" \ -Aldflags="-Wl,-syslibroot,$SDK" \ -de =head2 Universal Binary support Note: From Mac OS X 10.6 "Snow Leopard" onwards, Apple only supports Intel-based hardware. This means you can safely skip this section unless you have an older Apple computer running on ppc or wish to create a perl binary with backwards compatibility. You can compile perl as a universal binary (built for both ppc and intel). In Mac OS X 10.4 "Tiger", you must export the 'u' variant of the SDK: export SDK=/Developer/SDKs/MacOSX10.4u.sdk Mac OS X 10.5 "Leopard" and above do not require the 'u' variant. In addition to the compiler flags used to select the SDK, also add the flags for creating a universal binary: ./Configure -Accflags="-arch i686 -arch ppc -nostdinc \ -B$SDK/usr/include/gcc \ -B$SDK/usr/lib/gcc -isystem$SDK/usr/include \ -F$SDK/System/Library/Frameworks" \ -Aldflags="-arch i686 -arch ppc -Wl,-syslibroot,$SDK" \ -de Keep in mind that these compiler and linker settings will also be used when building CPAN modules. For XS modules to be compiled as a universal binary, any libraries it links to must also be universal binaries. The system libraries that Apple includes with the 10.4u SDK are all universal, but user-installed libraries may need to be re-installed as universal binaries. =head2 64-bit PPC support Follow the instructions in F<INSTALL> to build perl with support for 64-bit integers (C<use64bitint>) or both 64-bit integers and 64-bit addressing (C<use64bitall>). In the latter case, the resulting binary will run only on G5-based hosts. Support for 64-bit addressing is experimental: some aspects of Perl may be omitted or buggy. Note the messages output by F<Configure> for further information. Please use L<https://github.com/Perl/perl5/issues> to submit a problem report in the event that you encounter difficulties. When building 64-bit modules, it is your responsibility to ensure that linked external libraries and frameworks provide 64-bit support: if they do not, module building may appear to succeed, but attempts to use the module will result in run-time dynamic linking errors, and subsequent test failures. You can use C<file> to discover the architectures supported by a library: $ file libgdbm.3.0.0.dylib libgdbm.3.0.0.dylib: Mach-O fat file with 2 architectures libgdbm.3.0.0.dylib (for architecture ppc): Mach-O dynamically linked shared library ppc libgdbm.3.0.0.dylib (for architecture ppc64): Mach-O 64-bit dynamically linked shared library ppc64 Note that this issue precludes the building of many Macintosh-specific CPAN modules (C<Mac::*>), as the required Apple frameworks do not provide PPC64 support. Similarly, downloads from Fink or Darwinports are unlikely to provide 64-bit support; the libraries must be rebuilt from source with the appropriate compiler and linker flags. For further information, see Apple's I<64-Bit Transition Guide> at L<https://developer.apple.com/library/archive/documentation/Darwin/Conceptual/64bitPorting/transition/transition.html>. =head2 libperl and Prebinding Mac OS X ships with a dynamically-loaded libperl, but the default for this release is to compile a static libperl. The reason for this is pre-binding. Dynamic libraries can be pre-bound to a specific address in memory in order to decrease load time. To do this, one needs to be aware of the location and size of all previously-loaded libraries. Apple collects this information as part of their overall OS build process, and thus has easy access to it when building Perl, but ordinary users would need to go to a great deal of effort to obtain the information needed for pre-binding. You can override the default and build a shared libperl if you wish (S<Configure ... -Duseshrplib>). With Mac OS X 10.4 "Tiger" and newer, there is almost no performance penalty for non-prebound libraries. Earlier releases will suffer a greater load time than either the static library, or Apple's pre-bound dynamic library. =head2 Updating Apple's Perl In a word - don't, at least not without a *very* good reason. Your scripts can just as easily begin with "#!/usr/local/bin/perl" as with "#!/usr/bin/perl". Scripts supplied by Apple and other third parties as part of installation packages and such have generally only been tested with the /usr/bin/perl that's installed by Apple. If you find that you do need to update the system Perl, one issue worth keeping in mind is the question of static vs. dynamic libraries. If you upgrade using the default static libperl, you will find that the dynamic libperl supplied by Apple will not be deleted. If both libraries are present when an application that links against libperl is built, ld will link against the dynamic library by default. So, if you need to replace Apple's dynamic libperl with a static libperl, you need to be sure to delete the older dynamic library after you've installed the update. =head2 Known problems If you have installed extra libraries such as GDBM through Fink (in other words, you have libraries under F</sw/lib>), or libdlcompat to F</usr/local/lib>, you may need to be extra careful when running Configure to not to confuse Configure and Perl about which libraries to use. Being confused will show up for example as "dyld" errors about symbol problems, for example during "make test". The safest bet is to run Configure as Configure ... -Uloclibpth -Dlibpth=/usr/lib to make Configure look only into the system libraries. If you have some extra library directories that you really want to use (such as newer Berkeley DB libraries in pre-Panther systems), add those to the libpth: Configure ... -Uloclibpth -Dlibpth='/usr/lib /opt/lib' The default of building Perl statically may cause problems with complex applications like Tk: in that case consider building shared Perl Configure ... -Duseshrplib but remember that there's a startup cost to pay in that case (see above "libperl and Prebinding"). Starting with Tiger (Mac OS X 10.4), Apple shipped broken locale files for the eu_ES locale (Basque-Spain). In previous releases of Perl, this resulted in failures in the F<lib/locale> test. These failures have been suppressed in the current release of Perl by making the test ignore the broken locale. If you need to use the eu_ES locale, you should contact Apple support. =head2 Cocoa There are two ways to use Cocoa from Perl. Apple's PerlObjCBridge module, included with Mac OS X, can be used by standalone scripts to access Foundation (i.e. non-GUI) classes and objects. An alternative is CamelBones, a framework that allows access to both Foundation and AppKit classes and objects, so that full GUI applications can be built in Perl. CamelBones can be found on SourceForge, at L<https://www.sourceforge.net/projects/camelbones/>. =head1 Starting From Scratch Unfortunately it is not that difficult somehow manage to break one's Mac OS X Perl rather severely. If all else fails and you want to really, B<REALLY>, start from scratch and remove even your Apple Perl installation (which has become corrupted somehow), the following instructions should do it. B<Please think twice before following these instructions: they are much like conducting brain surgery to yourself. Without anesthesia.> We will B<not> come to fix your system if you do this. First, get rid of the libperl.dylib: # cd /System/Library/Perl/darwin/CORE # rm libperl.dylib Then delete every .bundle file found anywhere in the folders: /System/Library/Perl /Library/Perl You can find them for example by # find /System/Library/Perl /Library/Perl -name '*.bundle' -print After this you can either copy Perl from your operating system media (you will need at least the /System/Library/Perl and /usr/bin/perl), or rebuild Perl from the source code with C<Configure -Dprefix=/usr -Duseshrplib> NOTE: the C<-Dprefix=/usr> to replace the system Perl works much better with Perl 5.8.1 and later, in Perl 5.8.0 the settings were not quite right. "Pacifist" from CharlesSoft (L<https://www.charlessoft.com/>) is a nice way to extract the Perl binaries from the OS media, without having to reinstall the entire OS. =head1 AUTHOR This README was written by Sherm Pendley E<lt>sherm@dot-app.orgE<gt>, and subsequently updated by Dominic Dunlop E<lt>domo@computer.orgE<gt> and Breno G. de Oliveira E<lt>garu@cpan.orgE<gt>. The "Starting From Scratch" recipe was contributed by John Montbriand E<lt>montbriand@apple.comE<gt>. =head1 DATE Last modified 2013-04-29. perlplan9.pod 0000644 00000012005 15125556335 0007166 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specially designed to be readable as is. =head1 NAME perlplan9 - Plan 9-specific documentation for Perl =head1 DESCRIPTION These are a few notes describing features peculiar to Plan 9 Perl. As such, it is not intended to be a replacement for the rest of the Perl 5 documentation (which is both copious and excellent). If you have any questions to which you can't find answers in these man pages, contact Luther Huffman at lutherh@stratcom.com and we'll try to answer them. =head2 Invoking Perl Perl is invoked from the command line as described in L<perl>. Most perl scripts, however, do have a first line such as "#!/usr/local/bin/perl". This is known as a shebang (shell-bang) statement and tells the OS shell where to find the perl interpreter. In Plan 9 Perl this statement should be "#!/bin/perl" if you wish to be able to directly invoke the script by its name. Alternatively, you may invoke perl with the command "Perl" instead of "perl". This will produce Acme-friendly error messages of the form "filename:18". Some scripts, usually identified with a *.PL extension, are self-configuring and are able to correctly create their own shebang path from config information located in Plan 9 Perl. These you won't need to be worried about. =head2 What's in Plan 9 Perl Although Plan 9 Perl currently only provides static loading, it is built with a number of useful extensions. These include Opcode, FileHandle, Fcntl, and POSIX. Expect to see others (and DynaLoading!) in the future. =head2 What's not in Plan 9 Perl As mentioned previously, dynamic loading isn't currently available nor is MakeMaker. Both are high-priority items. =head2 Perl5 Functions not currently supported in Plan 9 Perl Some, such as C<chown> and C<umask> aren't provided because the concept does not exist within Plan 9. Others, such as some of the socket-related functions, simply haven't been written yet. Many in the latter category may be supported in the future. The functions not currently implemented include: chown, chroot, dbmclose, dbmopen, getsockopt, setsockopt, recvmsg, sendmsg, getnetbyname, getnetbyaddr, getnetent, getprotoent, getservent, sethostent, setnetent, setprotoent, setservent, endservent, endnetent, endprotoent, umask There may be several other functions that have undefined behavior so this list shouldn't be considered complete. =head2 Signals in Plan 9 Perl For compatibility with perl scripts written for the Unix environment, Plan 9 Perl uses the POSIX signal emulation provided in Plan 9's ANSI POSIX Environment (APE). Signal stacking isn't supported. The signals provided are: SIGHUP, SIGINT, SIGQUIT, SIGILL, SIGABRT, SIGFPE, SIGKILL, SIGSEGV, SIGPIPE, SIGPIPE, SIGALRM, SIGTERM, SIGUSR1, SIGUSR2, SIGCHLD, SIGCONT, SIGSTOP, SIGTSTP, SIGTTIN, SIGTTOU =head1 COMPILING AND INSTALLING PERL ON PLAN 9 WELCOME to Plan 9 Perl, brave soul! This is a preliminary alpha version of Plan 9 Perl. Still to be implemented are MakeMaker and DynaLoader. Many perl commands are missing or currently behave in an inscrutable manner. These gaps will, with perseverance and a modicum of luck, be remedied in the near future.To install this software: 1. Create the source directories and libraries for perl by running the plan9/setup.rc command (i.e., located in the plan9 subdirectory). Note: the setup routine assumes that you haven't dearchived these files into /sys/src/cmd/perl. After running setup.rc you may delete the copy of the source you originally detarred, as source code has now been installed in /sys/src/cmd/perl. If you plan on installing perl binaries for all architectures, run "setup.rc -a". 2. After making sure that you have adequate privileges to build system software, from /sys/src/cmd/perl/5.00301 (adjust version appropriately) run: mk install If you wish to install perl versions for all architectures (68020, mips, sparc and 386) run: mk installall 3. Wait. The build process will take a *long* time because perl bootstraps itself. A 75MHz Pentium, 16MB RAM machine takes roughly 30 minutes to build the distribution from scratch. =head2 Installing Perl Documentation on Plan 9 This perl distribution comes with a tremendous amount of documentation. To add these to the built-in manuals that come with Plan 9, from /sys/src/cmd/perl/5.00301 (adjust version appropriately) run: mk man To begin your reading, start with: man perl This is a good introduction and will direct you towards other man pages that may interest you. (Note: "mk man" may produce some extraneous noise. Fear not.) =head1 BUGS "As many as there are grains of sand on all the beaches of the world . . ." - Carl Sagan =head1 Revision date This document was revised 09-October-1996 for Perl 5.003_7. =head1 AUTHOR Direct questions, comments, and the unlikely bug report (ahem) direct comments toward: Luther Huffman, lutherh@stratcom.com, Strategic Computer Solutions, Inc. perl5320delta.pod 0000644 00000152511 15125556335 0007555 0 ustar 00 =pod =encoding utf8 =head1 NAME perl5320delta - what is new for perl v5.32.0 =head1 DESCRIPTION This document describes differences between the 5.30.0 release and the 5.32.0 release. If you are upgrading from an earlier release such as 5.28.0, first read L<perl5300delta>, which describes differences between 5.28.0 and 5.30.0. =head1 Core Enhancements =head2 The isa Operator A new experimental infix operator called C<isa> tests whether a given object is an instance of a given class or a class derived from it: if( $obj isa Package::Name ) { ... } For more detail see L<perlop/Class Instance Operator>. =head2 Unicode 13.0 is supported See L<https://www.unicode.org/versions/Unicode13.0.0/> for details. =head2 Chained comparisons capability Some comparison operators, as their associativity, I<chain> with some operators of the same precedence (but never with operators of different precedence). if ( $x < $y <= $z ) {...} behaves exactly like: if ( $x < $y && $y <= $z ) {...} (assuming that C<"$y"> is as simple a scalar as it looks.) You can read more about this in L<perlop> under L<perlop/Operator Precedence and Associativity>. =head2 New Unicode properties C<Identifier_Status> and C<Identifier_Type> supported Unicode has revised its regular expression requirements: L<https://www.unicode.org/reports/tr18/tr18-21.html>. As part of that they are wanting more properties to be exposed, ones that aren't part of the strict UCD (Unicode character database). These two are used for examining inputs for security purposes. Details on their usage is at L<https://www.unicode.org/reports/tr39/>. =head2 It is now possible to write C<qr/\p{Name=...}/>, or C<qr!\p{na=/(SMILING|GRINNING) FACE/}!> The Unicode Name property is now accessible in regular expression patterns, as an alternative to C<\N{...}>. A comparison of the two methods is given in L<perlunicode/Comparison of \N{...} and \p{name=...}>. The second example above shows that wildcard subpatterns are also usable in this property. See L<perlunicode/Wildcards in Property Values>. =head2 Improvement of C<POSIX::mblen()>, C<mbtowc>, and C<wctomb> The C<POSIX::mblen()>, C<mbtowc>, and C<wctomb> functions now work on shift state locales and are thread-safe on C99 and above compilers when executed on a platform that has locale thread-safety; the length parameters are now optional. These functions are always executed under the current C language locale. (See L<perllocale>.) Most locales are stateless, but a few, notably the very rarely encountered ISO 2022, maintain a state between calls to these functions. Previously the state was cleared on every call, but now the state is not reset unless the appropriate parameter is C<undef>. On threaded perls, the C99 functions L<mbrlen(3)>, L<mbrtowc(3)>, and L<wcrtomb(3)>, when available, are substituted for the plain functions. This makes these functions thread-safe when executing on a locale thread-safe platform. The string length parameters in C<mblen> and C<mbtowc> are now optional; useful only if you wish to restrict the length parsed in the source string to less than the actual length. =head2 Alpha assertions are no longer experimental See L<perlre/(*pla:pattern)>, L<perlre/(*plb:pattern)>, L<perlre/(*nla:pattern)>>, and L<perlre/(*nlb:pattern)>. Use of these no longer generates a warning; existing code that disables the warning category C<experimental::alpha_assertions> will continue to work without any changes needed. Enabling the category has no effect. =head2 Script runs are no longer experimental See L<perlre/Script Runs>. Use of these no longer generates a warning; existing code that disables the warning category C<experimental::script_run> will continue to work without any changes needed. Enabling the category has no effect. =head2 Feature checks are now faster Previously feature checks in the parser required a hash lookup when features were set outside of a feature bundle, this has been optimized to a bit mask check. [L<GH #17229|https://github.com/Perl/perl5/issues/17229>] =head2 Perl is now developed on GitHub Perl is now developed on GitHub. You can find us at L<https://github.com/Perl/perl5>. Non-security bugs should now be reported via GitHub. Security issues should continue to be reported as documented in L<perlsec>. =head2 Compiled patterns can now be dumped before optimization This is primarily useful for tracking down bugs in the regular expression compiler. This dump happens on C<-DDEBUGGING> perls, if you specify C<-Drv> on the command line; or on any perl if the pattern is compiled within the scope of S<C<use re qw(Debug DUMP_PRE_OPTIMIZE)>> or S<C<use re qw(Debug COMPILE EXTRA)>>. (All but the second case display other information as well.) =head1 Security =head2 [CVE-2020-10543] Buffer overflow caused by a crafted regular expression A signed C<size_t> integer overflow in the storage space calculations for nested regular expression quantifiers could cause a heap buffer overflow in Perl's regular expression compiler that overwrites memory allocated after the regular expression storage space with attacker supplied data. The target system needs a sufficient amount of memory to allocate partial expansions of the nested quantifiers prior to the overflow occurring. This requirement is unlikely to be met on 64-bit systems. Discovered by: ManhND of The Tarantula Team, VinCSS (a member of Vingroup). =head2 [CVE-2020-10878] Integer overflow via malformed bytecode produced by a crafted regular expression Integer overflows in the calculation of offsets between instructions for the regular expression engine could cause corruption of the intermediate language state of a compiled regular expression. An attacker could abuse this behaviour to insert instructions into the compiled form of a Perl regular expression. Discovered by: Hugo van der Sanden and Slaven Rezic. =head2 [CVE-2020-12723] Buffer overflow caused by a crafted regular expression Recursive calls to C<S_study_chunk()> by Perl's regular expression compiler to optimize the intermediate language representation of a regular expression could cause corruption of the intermediate language state of a compiled regular expression. Discovered by: Sergey Aleynikov. =head2 Additional Note An application written in Perl would only be vulnerable to any of the above flaws if it evaluates regular expressions supplied by the attacker. Evaluating regular expressions in this fashion is known to be dangerous since the regular expression engine does not protect against denial of service attacks in this usage scenario. =head1 Incompatible Changes =head2 Certain pattern matching features are now prohibited in compiling Unicode property value wildcard subpatterns These few features are either inappropriate or interfere with the algorithm used to accomplish this task. The complete list is in L<perlunicode/Wildcards in Property Values>. =head2 Unused functions C<POSIX::mbstowcs> and C<POSIX::wcstombs> are removed These functions could never have worked due to a defective interface specification. There is clearly no demand for them, given that no one has ever complained in the many years the functions were claimed to be available, hence so-called "support" for them is now dropped. =head2 A bug fix for C<(?[...])> may have caused some patterns to no longer compile See L</Selected Bug Fixes>. The heuristics previously used may have let some constructs compile (perhaps not with the programmer's intended effect) that should have been errors. None are known, but it is possible that some erroneous constructs no longer compile. =head2 C<\p{I<user-defined>}> properties now always override official Unicode ones Previously, if and only if a user-defined property was declared prior to the compilation of the regular expression pattern that contains it, its definition was used instead of any official Unicode property with the same name. Now, it always overrides the official property. This change could break existing code that relied (likely unwittingly) on the previous behavior. Without this fix, if Unicode released a new version with a new property that happens to have the same name as the one you had long been using, your program would break when you upgraded to a perl that used that new Unicode version. See L<perlunicode/User-Defined Character Properties>. [L<GH #17205|https://github.com/Perl/perl5/issues/17205>] =head2 Modifiable variables are no longer permitted in constants Code like: my $var; $sub = sub () { $var }; where C<$var> is referenced elsewhere in some sort of modifiable context now produces an exception when the sub is defined. This error can be avoided by adding a return to the sub definition: $sub = sub () { return $var }; This has been deprecated since Perl 5.22. [L<perl #134138|https://rt.perl.org/Ticket/Display.html?id=134138>] =head2 Use of L<C<vec>|perlfunc/vec EXPR,OFFSET,BITS> on strings with code points above 0xFF is forbidden Such strings are represented internally in UTF-8, and C<vec> is a bit-oriented operation that will likely give unexpected results on those strings. This was deprecated in perl 5.28.0. =head2 Use of code points over 0xFF in string bitwise operators Some uses of these were already illegal after a previous deprecation cycle. The remaining uses are now prohibited, having been deprecated in perl 5.28.0. See L<perldeprecation>. =head2 C<Sys::Hostname::hostname()> does not accept arguments This usage was deprecated in perl 5.28.0 and is now fatal. =head2 Plain "0" string now treated as a number for range operator Previously a range C<"0" .. "-1"> would produce a range of numeric strings from "0" through "99"; this now produces an empty list, just as C<0 .. -1> does. This also means that C<"0" .. "9"> now produces a list of integers, where previously it would produce a list of strings. This was due to a special case that treated strings starting with "0" as strings so ranges like C<"00" .. "03"> produced C<"00", "01", "02", "03">, but didn't specially handle the string C<"0">. [L<perl #133695|https://rt.perl.org/Ticket/Display.html?id=133695>] =head2 C<\K> now disallowed in look-ahead and look-behind assertions This was disallowed because it causes unexpected behaviour, and no-one could define what the desired behaviour should be. [L<perl #124256|https://rt.perl.org/Ticket/Display.html?id=124256>] =head1 Performance Enhancements =over 4 =item * C<my_strnlen> has been sped up for systems that don't have their own C<strnlen> implementation. =item * C<grok_bin_oct_hex> (and so, C<grok_bin>, C<grok_oct>, and C<grok_hex>) have been sped up. =item * C<grok_number_flags> has been sped up. =item * C<sort> is now noticeably faster in cases such as C<< sort {$a <=> $b} >> or C<< sort {$b <=> $a} >>. [L<GH #17608|https://github.com/Perl/perl5/pull/17608>] =back =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Archive::Tar> has been upgraded from version 2.32 to 2.36. =item * L<autodie> has been upgraded from version 2.29 to 2.32. =item * L<B> has been upgraded from version 1.76 to 1.80. =item * L<B::Deparse> has been upgraded from version 1.49 to 1.54. =item * L<Benchmark> has been upgraded from version 1.22 to 1.23. =item * L<charnames> has been upgraded from version 1.45 to 1.48. =item * L<Class::Struct> has been upgraded from version 0.65 to 0.66. =item * L<Compress::Raw::Bzip2> has been upgraded from version 2.084 to 2.093. =item * L<Compress::Raw::Zlib> has been upgraded from version 2.084 to 2.093. =item * L<CPAN> has been upgraded from version 2.22 to 2.27. =item * L<DB_File> has been upgraded from version 1.843 to 1.853. =item * L<Devel::PPPort> has been upgraded from version 3.52 to 3.57. The test files generated on Win32 are now identical to when they are generated on POSIX-like systems. =item * L<diagnostics> has been upgraded from version 1.36 to 1.37. =item * L<Digest::MD5> has been upgraded from version 2.55 to 2.55_01. =item * L<Dumpvalue> has been upgraded from version 1.18 to 1.21. Previously, when dumping elements of an array and encountering an undefined value, the string printed would have been C<empty array>. This has been changed to what was apparently originally intended: C<empty slot>. =item * L<DynaLoader> has been upgraded from version 1.45 to 1.47. =item * L<Encode> has been upgraded from version 3.01 to 3.06. =item * L<encoding> has been upgraded from version 2.22 to 3.00. =item * L<English> has been upgraded from version 1.10 to 1.11. =item * L<Exporter> has been upgraded from version 5.73 to 5.74. =item * L<ExtUtils::CBuilder> has been upgraded from version 0.280231 to 0.280234. =item * L<ExtUtils::MakeMaker> has been upgraded from version 7.34 to 7.44. =item * L<feature> has been upgraded from version 1.54 to 1.58. A new C<indirect> feature has been added, which is enabled by default but allows turning off L<indirect object syntax|perlobj/Indirect Object Syntax>. =item * L<File::Find> has been upgraded from version 1.36 to 1.37. On Win32, the tests no longer require either a file in the drive root directory, or a writable root directory. =item * L<File::Glob> has been upgraded from version 1.32 to 1.33. =item * L<File::stat> has been upgraded from version 1.08 to 1.09. =item * L<Filter::Simple> has been upgraded from version 0.95 to 0.96. =item * L<Getopt::Long> has been upgraded from version 2.5 to 2.51. =item * L<Hash::Util> has been upgraded from version 0.22 to 0.23. The Synopsis has been updated as the example code stopped working with newer perls. [L<GH #17399|https://github.com/Perl/perl5/issues/17399>] =item * L<I18N::Langinfo> has been upgraded from version 0.18 to 0.19. =item * L<I18N::LangTags> has been upgraded from version 0.43 to 0.44. Document the C<IGNORE_WIN32_LOCALE> environment variable. =item * L<IO> has been upgraded from version 1.40 to 1.43. L<IO::Socket> no longer caches a zero protocol value, since this indicates that the implementation will select a protocol. This means that on platforms that don't implement C<SO_PROTOCOL> for a given socket type the protocol method may return C<undef>. The supplied I<TO> is now always honoured on calls to the C<send()> method. [L<perl #133936|https://rt.perl.org/Ticket/Display.html?id=133936>] =item * IO-Compress has been upgraded from version 2.084 to 2.093. =item * L<IPC::Cmd> has been upgraded from version 1.02 to 1.04. =item * L<IPC::Open3> has been upgraded from version 1.20 to 1.21. =item * L<JSON::PP> has been upgraded from version 4.02 to 4.04. =item * L<Math::BigInt> has been upgraded from version 1.999816 to 1.999818. =item * L<Math::BigInt::FastCalc> has been upgraded from version 0.5008 to 0.5009. =item * L<Module::CoreList> has been upgraded from version 5.20190522 to 5.20200620. =item * L<Module::Load::Conditional> has been upgraded from version 0.68 to 0.70. =item * L<Module::Metadata> has been upgraded from version 1.000036 to 1.000037. =item * L<mro> has been upgraded from version 1.22 to 1.23. =item * L<Net::Ping> has been upgraded from version 2.71 to 2.72. =item * L<Opcode> has been upgraded from version 1.43 to 1.47. =item * L<open> has been upgraded from version 1.11 to 1.12. =item * L<overload> has been upgraded from version 1.30 to 1.31. =item * L<parent> has been upgraded from version 0.237 to 0.238. =item * L<perlfaq> has been upgraded from version 5.20190126 to 5.20200523. =item * L<PerlIO> has been upgraded from version 1.10 to 1.11. =item * L<PerlIO::encoding> has been upgraded from version 0.27 to 0.28. =item * L<PerlIO::via> has been upgraded from version 0.17 to 0.18. =item * L<Pod::Html> has been upgraded from version 1.24 to 1.25. =item * L<Pod::Simple> has been upgraded from version 3.35 to 3.40. =item * L<podlators> has been upgraded from version 4.11 to 4.14. =item * L<POSIX> has been upgraded from version 1.88 to 1.94. =item * L<re> has been upgraded from version 0.37 to 0.40. =item * L<Safe> has been upgraded from version 2.40 to 2.41. =item * L<Scalar::Util> has been upgraded from version 1.50 to 1.55. =item * L<SelfLoader> has been upgraded from version 1.25 to 1.26. =item * L<Socket> has been upgraded from version 2.027 to 2.029. =item * L<Storable> has been upgraded from version 3.15 to 3.21. Use of C<note()> from L<Test::More> is now optional in tests. This works around a circular dependency with L<Test::More> when installing on very old perls from CPAN. Vstring magic strings over 2GB are now disallowed. Regular expressions objects weren't properly counted for object id purposes on retrieve. This would corrupt the resulting structure, or cause a runtime error in some cases. [L<perl #134179|https://rt.perl.org/Ticket/Display.html?id=134179>] =item * L<Sys::Hostname> has been upgraded from version 1.22 to 1.23. =item * L<Sys::Syslog> has been upgraded from version 0.35 to 0.36. =item * L<Term::ANSIColor> has been upgraded from version 4.06 to 5.01. =item * L<Test::Simple> has been upgraded from version 1.302162 to 1.302175. =item * L<Thread> has been upgraded from version 3.04 to 3.05. =item * L<Thread::Queue> has been upgraded from version 3.13 to 3.14. =item * L<threads> has been upgraded from version 2.22 to 2.25. =item * L<threads::shared> has been upgraded from version 1.60 to 1.61. =item * L<Tie::File> has been upgraded from version 1.02 to 1.06. =item * L<Tie::Hash::NamedCapture> has been upgraded from version 0.10 to 0.13. =item * L<Tie::Scalar> has been upgraded from version 1.04 to 1.05. =item * L<Tie::StdHandle> has been upgraded from version 4.5 to 4.6. =item * L<Time::HiRes> has been upgraded from version 1.9760 to 1.9764. Removed obsolete code such as support for pre-5.6 perl and classic MacOS. [L<perl #134288|https://rt.perl.org/Ticket/Display.html?id=134288>] =item * L<Time::Piece> has been upgraded from version 1.33 to 1.3401. =item * L<Unicode::Normalize> has been upgraded from version 1.26 to 1.27. =item * L<Unicode::UCD> has been upgraded from version 0.72 to 0.75. =item * L<VMS::Stdio> has been upgraded from version 2.44 to 2.45. =item * L<warnings> has been upgraded from version 1.44 to 1.47. =item * L<Win32> has been upgraded from version 0.52 to 0.53. =item * L<Win32API::File> has been upgraded from version 0.1203 to 0.1203_01. =item * L<XS::APItest> has been upgraded from version 1.00 to 1.09. =back =head2 Removed Modules and Pragmata =over 4 =item * Pod::Parser has been removed from the core distribution. It still is available for download from CPAN. This resolves [L<perl #119439|https://rt.perl.org/Ticket/Display.html?id=119439>]. =back =head1 Documentation =head2 Changes to Existing Documentation We have attempted to update the documentation to reflect the changes listed in this document. If you find any we have missed, open an issue at L<https://github.com/Perl/perl5/issues>. Additionally, the following selected changes have been made: =head3 L<perldebguts> =over 4 =item * Simplify a few regnode definitions Update C<BOUND> and C<NBOUND> definitions. =item * Add ANYOFHs regnode This node is like C<ANYOFHb>, but is used when more than one leading byte is the same in all the matched code points. C<ANYOFHb> is used to avoid having to convert from UTF-8 to code point for something that won't match. It checks that the first byte in the UTF-8 encoded target is the desired one, thus ruling out most of the possible code points. =back =head3 L<perlapi> =over 4 =item * C<sv_2pvbyte> updated to mention it will croak if the SV cannot be downgraded. =item * C<sv_setpvn> updated to mention that the UTF-8 flag will not be changed by this function, and a terminating NUL byte is guaranteed. =item * Documentation for C<PL_phase> has been added. =item * The documentation for C<grok_bin>, C<grok_oct>, and C<grok_hex> has been updated and clarified. =back =head3 L<perldiag> =over 4 =item * Add documentation for experimental 'isa' operator (S experimental::isa) This warning is emitted if you use the (C<isa>) operator. This operator is currently experimental and its behaviour may change in future releases of Perl. =back =head3 L<perlfunc> =over 4 =item C<caller> Like L<C<__FILE__>|/__FILE__> and L<C<__LINE__>|/__LINE__>, the filename and line number returned here may be altered by the mechanism described at L<perlsyn/"Plain Old Comments (Not!)">. =item C<__FILE__> It can be altered by the mechanism described at L<perlsyn/"Plain Old Comments (Not!)">. =item C<__LINE__> It can be altered by the mechanism described at L<perlsyn/"Plain Old Comments (Not!)">. =item C<return> Now mentions that you cannot return from C<do BLOCK>. =item C<open> The C<open()> section had been renovated significantly. =back =head3 L<perlguts> =over 4 =item * No longer suggesting using perl's C<malloc>. Modern system C<malloc> is assumed to be much better than perl's implementation now. =item * Documentation about F<embed.fnc> flags has been removed. F<embed.fnc> now has sufficient comments within it. Anyone changing that file will see those comments first, so entries here are now redundant. =item * Updated documentation for C<UTF8f> =item * Added missing C<=for apidoc> lines =back =head3 L<perlhacktips> =over 4 =item * The differences between Perl strings and C strings are now detailed. =back =head3 L<perlintro> =over 4 =item * The documentation for the repetition operator C<x> have been clarified. [L<GH #17335|https://github.com/Perl/perl5/issues/17335>] =back =head3 L<perlipc> =over 4 =item * The documentation surrounding C<open> and handle usage has been modernized to prefer 3-arg open and lexical variables instead of barewords. =item * Various updates and fixes including making all examples strict-safe and replacing C<-w> with C<use warnings>. =back =head3 L<perlop> =over 4 =item * 'isa' operator is experimental This is an experimental feature and is available when enabled by C<use feature 'isa'>. It emits a warning in the C<experimental::isa> category. =back =head3 L<perlpod> =over 4 =item * Details of the various stacks within the perl interpreter are now explained here. =item * Advice has been added regarding the usage of C<< ZE<lt>E<gt> >>. =back =head3 L<perlport> =over 4 =item * Update C<timegm> example to use the correct year format I<1970> instead of I<70>. [L<GH #16431|https://github.com/Perl/perl5/issues/16431>] =back =head3 L<perlreref> =over 4 =item * Fix some typos. =back =head3 L<perlvar> =over 4 =item * Now recommends stringifying C<$]> and comparing it numerically. =back =head3 L<perlapi>, L<perlintern> =over 4 =item * Documentation has been added for several functions that were lacking it before. =back =head3 L<perlxs> =over 4 =item * Suggest using C<libffi> for simple library bindings via CPAN modules like L<FFI::Platypus> or L<FFI::Raw>. =back =head3 L<POSIX> =over 4 =item * C<setlocale> warning about threaded builds updated to note it does not apply on Perl 5.28.X and later. =item * C<< Posix::SigSet->new(...) >> updated to state it throws an error if any of the supplied signals cannot be added to the set. =back Additionally, the following selected changes have been made: =head3 Updating of links =over 4 =item * Links to the now defunct L<https://search.cpan.org> site now point at the equivalent L<https://metacpan.org> URL. [L<GH #17393|https://github.com/Perl/perl5/issues/17393>] =item * The man page for L<ExtUtils::XSSymSet> is now only installed on VMS, which is the only platform the module is installed on. [L<GH #17424|https://github.com/Perl/perl5/issues/17424>] =item * URLs have been changed to C<https://> and stale links have been updated. Where applicable, the URLs in the documentation have been moved from using the C<http://> protocol to C<https://>. This also affects the location of the bug tracker at L<https://rt.perl.org>. =item * Some links to OS/2 libraries, Address Sanitizer and other system tools had gone stale. These have been updated with working links. =item * Some links to old email addresses on perl5-porters had gone stale. These have been updated with working links. =back =head1 Diagnostics The following additions or changes have been made to diagnostic output, including warnings and fatal error messages. For the complete list of diagnostic messages, see L<perldiag>. =head2 New Diagnostics =head3 New Errors =over 4 =item * L<Expecting interpolated extended charclass in regex; marked by <-- HERE in mE<sol>%sE<sol> |perldiag/"Expecting interpolated extended charclass in regex; marked by <-- HERE in mE<sol>%sE<sol>"> This is a replacement for several error messages listed under L</Changes to Existing Diagnostics>. =item * C<L<No digits found for %s literal|perldiag/"No digits found for %s literal">> (F) No hexadecimal digits were found following C<0x> or no binary digits were found following C<0b>. =back =head3 New Warnings =over 4 =item * L<Code point 0x%X is not Unicode, and not portable|perldiag/"Code point 0x%X is not Unicode, and not portable"> This is actually not a new message, but it is now output when the warnings category C<portable> is enabled. When raised during regular expression pattern compilation, the warning has extra text added at the end marking where precisely in the pattern it occurred. =item * L<Non-hex character '%c' terminates \x early. Resolved as "%s"|perldiag/"Non-hex character '%c' terminates \x early. Resolved as "%s""> This replaces a warning that was much less specific, and which gave false information. This new warning parallels the similar already-existing one raised for C<\o{}>. =back =head2 Changes to Existing Diagnostics =over 4 =item * L<Character following "\c" must be printable ASCII|perldiag/"Character following "\c" must be printable ASCII"> ...now has extra text added at the end, when raised during regular expression pattern compilation, marking where precisely in the pattern it occurred. =item * L<Use "%s" instead of "%s"|perldiag/"Use "%s" instead of "%s""> ...now has extra text added at the end, when raised during regular expression pattern compilation, marking where precisely in the pattern it occurred. =item * L<Sequence "\c{" invalid|perldiag/"Sequence "\c{" invalid"> ...now has extra text added at the end, when raised during regular expression pattern compilation, marking where precisely in the pattern it occurred. =item * L<"\c%c" is more clearly written simply as "%s"|perldiag/""\c%c" is more clearly written simply as "%s""> ...now has extra text added at the end, when raised during regular expression pattern compilation, marking where precisely in the pattern it occurred. =item * L<Non-octal character '%c' terminates \o early. Resolved as "%s"|perldiag/"Non-octal character '%c' terminates \o early. Resolved as "%s""> ...now includes the phrase "terminates \o early", and has extra text added at the end, when raised during regular expression pattern compilation, marking where precisely in the pattern it occurred. In some instances the text of the resolution has been clarified. =item * L<'%s' resolved to '\o{%s}%d'|perldiag/'%s' resolved to '\o{%s}%d'> As of Perl 5.32, this message is no longer generated. Instead, L<perldiag/Non-octal character '%c' terminates \o early. Resolved as "%s"> is used instead. =item * L<Use of code point 0x%s is not allowed; the permissible max is 0x%X|perldiag/"Use of code point 0x%s is not allowed; the permissible max is 0x%X"> Some instances of this message previously output the hex digits C<A>, C<B>, C<C>, C<D>, C<E>, and C<F> in lower case. Now they are all consistently upper case. =item * The following three diagnostics have been removed, and replaced by L<C<Expecting interpolated extended charclass in regex; marked by <-- HERE in mE<sol>%sE<sol>> |perldiag/"Expecting interpolated extended charclass in regex; marked by <-- HERE in mE<sol>%sE<sol>">: C<Expecting close paren for nested extended charclass in regex; marked by <-- HERE in mE<sol>%sE<sol>>, C<Expecting close paren for wrapper for nested extended charclass in regex; marked by <-- HERE in mE<sol>%sE<sol>>, and C<Expecting '(?flags:(?[...' in regex; marked by S<<-- HERE> in mE<sol>%sE<sol>>. =item * The C<Code point 0x%X is not Unicode, and not portable> warning removed the line C<Code points above 0xFFFF_FFFF require larger than a 32 bit word.> as code points that large are no longer legal on 32-bit platforms. =item * L<Can't use global %s in %s|perldiag/"Can't use global %s in %s"> This error message has been slightly reformatted from the original C<Can't use global %s in "%s">, and in particular misleading error messages like C<Can't use global $_ in "my"> are now rendered as C<Can't use global $_ in subroutine signature>. =item * L<Constants from lexical variables potentially modified elsewhere are no longer permitted|perldiag/"Constants from lexical variables potentially modified elsewhere are no longer permitted"> This error message replaces the former C<Constants from lexical variables potentially modified elsewhere are deprecated. This will not be allowed in Perl 5.32> to reflect the fact that this previously deprecated usage has now been transformed into an exception. The message's classification has also been updated from D (deprecated) to F (fatal). See also L</Incompatible Changes>. =item * C<\N{} here is restricted to one character> is now emitted in the same circumstances where previously C<\N{} in inverted character class or as a range end-point is restricted to one character> was. This is due to new circumstances having been added in Perl 5.30 that weren't covered by the earlier wording. =back =head1 Utility Changes =head2 L<perlbug> =over 4 =item * The bug tracker homepage URL now points to GitHub. =back =head2 L<streamzip> =over 4 =item * This is a new utility, included as part of an L<IO::Compress::Base> upgrade. L<streamzip> creates a zip file from stdin. The program will read data from stdin, compress it into a zip container and, by default, write a streamed zip file to stdout. =back =head1 Configuration and Compilation =head2 F<Configure> =over 4 =item * For clang++, add C<< #include <stdlib.h> >> to Configure's probes for C<futimes>, C<strtoll>, C<strtoul>, C<strtoull>, C<strtouq>, otherwise the probes would fail to compile. =item * Use a compile and run test for C<lchown> to satisfy clang++ which should more reliably detect it. =item * For C++ compilers, add C<< #include <stdio.h> >> to Configure's probes for C<getpgrp> and C<setpgrp> as they use printf and C++ compilers may fail compilation instead of just warning. =item * Check if the compiler can handle inline attribute. =item * Check for character data alignment. =item * F<Configure> now correctly handles gcc-10. Previously it was interpreting it as gcc-1 and turned on C<-fpcc-struct-return>. =item * Perl now no longer probes for C<d_u32align>, defaulting to C<define> on all platforms. This check was error-prone when it was done, which was on 32-bit platforms only. [L<perl #133495|https://rt.perl.org/Ticket/Display.html?id=133495>] =item * Documentation and hints for building perl on Z/OS (native EBCDIC) have been updated. This is still a work in progress. =item * A new probe for C<malloc_usable_size> has been added. =item * Improvements in F<Configure> to detection in C++ and clang++. Work ongoing by Andy Dougherty. [L<perl #134171|https://rt.perl.org/Ticket/Display.html?id=134171>] =item * F<autodoc.pl> This tool that regenerates L<perlintern> and L<perlapi> has been overhauled significantly, restoring consistency in flags used in F<embed.fnc> and L<Devel::PPPort> and allowing removal of many redundant C<=for apidoc> entries in code. =item * The C<ECHO> macro is now defined. This is used in a C<dtrace> rule that was originally changed for FreeBSD, and the FreeBSD make apparently predefines it. The Solaris make does not predefine C<ECHO> which broke this rule on Solaris. [L<perl #134218|https://rt.perl.org/Ticket/Display.html?id=134218>] =item * Bison versions 3.1 through 3.4 are now supported. =back =head1 Testing Tests were added and changed to reflect the other additions and changes in this release. Furthermore, these significant changes were made: =over 4 =item * F<t/run/switches.t> no longer uses (and re-uses) the F<tmpinplace/> directory under F<t/>. This may prevent spurious failures. [L<GH #17424|https://github.com/Perl/perl5/issues/17424>] =item * Various bugs in C<POSIX::mbtowc> were fixed. Potential races with other threads are now avoided, and previously the returned wide character could well be garbage. =item * Various bugs in C<POSIX::wctomb> were fixed. Potential races with other threads are now avoided, and previously it would segfault if the string parameter was shared or hadn't been pre-allocated with a string of sufficient length to hold the result. =item * Certain test output of scalars containing control characters and Unicode has been fixed on EBCDIC. =item * F<t/charset_tools.pl>: Avoid some work on ASCII platforms. =item * F<t/re/regexp.t>: Speed up many regex tests on ASCII platform =item * F<t/re/pat.t>: Skip tests that don't work on EBCDIC. =back =head1 Platform Support =head2 Discontinued Platforms =over 4 =item Windows CE Support for building perl on Windows CE has now been removed. =back =head2 Platform-Specific Notes =over 4 =item Linux C<cc> will be used to populate C<plibpth> if C<cc> is C<clang>. [L<perl #134189|https://rt.perl.org/Ticket/Display.html?id=134189>] =item NetBSD 8.0 Fix compilation of Perl on NetBSD 8.0 with g++. [L<GH #17381|https://github.com/Perl/perl5/issues/17381>] =item Windows =over 4 =item * The configuration for C<ccflags> and C<optimize> are now separate, as with POSIX platforms. [L<GH #17156|https://github.com/Perl/perl5/issues/17156>] =item * Support for building perl with Visual C++ 6.0 has now been removed. =item * The locale tests could crash on Win32 due to a Windows bug, and separately due to the CRT throwing an exception if the locale name wasn't validly encoded in the current code page. For the second we now decode the locale name ourselves, and always decode it as UTF-8. [L<perl #133981|https://rt.perl.org/Ticket/Display.html?id=133981>] =item * F<t/op/magic.t> could fail if environment variables starting with C<FOO> already existed. =item * MYMALLOC (PERL_MALLOC) build has been fixed. =back =item Solaris =over 4 =item * C<Configure> will now find recent versions of the Oracle Developer Studio compiler, which are found under C</opt/developerstudio*>. =item * C<Configure> now uses the detected types for C<gethostby*> functions, allowing Perl to once again compile on certain configurations of Solaris. =back =item VMS =over 4 =item * With the release of the patch kit C99 V2.0, VSI has provided support for a number of previously-missing C99 features. On systems with that patch kit installed, Perl's configuration process will now detect the presence of the header C<stdint.h> and the following functions: C<fpclassify>, C<isblank>, C<isless>, C<llrint>, C<llrintl>, C<llround>, C<llroundl>, C<nearbyint>, C<round>, C<scalbn>, and C<scalbnl>. =item * C<-Duse64bitint> is now the default on VMS. =back =item z/OS Perl 5.32 has been tested on z/OS 2.4, with the following caveats: =over 4 =item * Only static builds (the default) build reliably =item * When using locales, z/OS does not handle the C<LC_MESSAGES> category properly, so when compiling perl, you should add the following to your F<Configure> options ./Configure <other options> -Accflags=-DNO_LOCALE_MESSAGES =item * z/OS does not support locales with threads, so when compiling a threaded perl, you should add the following to your F<Configure> options ./Configure <other Configure options> -Accflags=-DNO_LOCALE =item * Some CPAN modules that are shipped with perl fail at least one of their self-tests. These are: Archive::Tar, Config::Perl::V, CPAN::Meta, CPAN::Meta::YAML, Digest::MD5, Digest::SHA, Encode, ExtUtils::MakeMaker, ExtUtils::Manifest, HTTP::Tiny, IO::Compress, IPC::Cmd, JSON::PP, libnet, MIME::Base64, Module::Metadata, PerlIO::via-QuotedPrint, Pod::Checker, podlators, Pod::Simple, Socket, and Test::Harness. The causes of the failures range from the self-test itself is flawed, and the module actually works fine, up to the module doesn't work at all on EBCDIC platforms. =back =back =head1 Internal Changes =over 4 =item * C<savepvn>'s len parameter is now a C<Size_t> instead of an C<I32> since we can handle longer strings than 31 bits. =item * The lexer (C<Perl_yylex()> in F<toke.c>) was previously a single 4100-line function, relying heavily on C<goto> and a lot of widely-scoped local variables to do its work. It has now been pulled apart into a few dozen smaller static functions; the largest remaining chunk (C<yyl_word_or_keyword()>) is a little over 900 lines, and consists of a single C<switch> statement, all of whose C<case> groups are independent. This should be much easier to understand and maintain. =item * The OS-level signal handlers and type (Sighandler_t) used by the perl core were declared as having three parameters, but the OS was always told to call them with one argument. This has been fixed by declaring them to have one parameter. See the merge commit C<v5.31.5-346-g116e19abbf> for full details. =item * The code that handles C<tr///> has been extensively revised, fixing various bugs, especially when the source and/or replacement strings contain characters whose code points are above 255. Some of the bugs were undocumented, one being that under some circumstances (but not all) with C</s>, the squeezing was done based on the source, rather than the replacement. A documented bug that got fixed was [L<perl #125493|https://rt.perl.org/Ticket/Display.html?id=125493>]. =item * A new macro for XS writers dealing with UTF-8-encoded Unicode strings has been created L<perlapi/C<UTF8_CHK_SKIP>> that is safer in the face of malformed UTF-8 input than L<perlapi/C<UTF8_SKIP>> (but not as safe as L<perlapi/C<UTF8_SAFE_SKIP>>). It won't read past a NUL character. It has been backported in L<Devel::PPPort> 3.55 and later. =item * Added the C<< PL_curstackinfo->si_cxsubix >> field. This records the stack index of the most recently pushed sub/format/eval context. It is set and restored automatically by C<cx_pushsub()>, C<cx_popsub()> etc., but would need to be manually managed if you do any unusual manipulation of the context stack. =item * Various macros dealing with character type classification and changing case where the input is encoded in UTF-8 now require an extra parameter to prevent potential reads beyond the end of the buffer. Use of these has generated a deprecation warning since Perl 5.26. Details are in L<perldeprecation/In XS code, use of various macros dealing with UTF-8.> =item * A new parser function L<parse_subsignature()|perlapi/parse_subsignature> allows a keyword plugin to parse a subroutine signature while C<use feature 'signatures'> is in effect. This allows custom keywords to implement semantics similar to regular C<sub> declarations that include signatures. [L<perl #132474|https://rt.perl.org/Ticket/Display.html?id=132474>] =item * Since on some platforms we need to hold a mutex when temporarily switching locales, new macros (C<STORE_LC_NUMERIC_SET_TO_NEEDED_IN>, C<WITH_LC_NUMERIC_SET_TO_NEEDED> and C<WITH_LC_NUMERIC_SET_TO_NEEDED_IN>) have been added to make it easier to do this safely and efficiently as part of [L<perl #134172|https://rt.perl.org/Ticket/Display.html?id=134172>]. =item * The memory bookkeeping overhead for allocating an OP structure has been reduced by 8 bytes per OP on 64-bit systems. =item * L<eval_pv()|perlapi/eval_pv> no longer stringifies the exception when C<croak_on_error> is true. [L<perl #134175|https://rt.perl.org/Ticket/Display.html?id=134175>] =item * The PERL_DESTRUCT_LEVEL environment variable was formerly only honoured on perl binaries built with DEBUGGING support. It is now checked on all perl builds. Its normal use is to force perl to individually free every block of memory which it has allocated before exiting, which is useful when using automated leak detection tools such as valgrind. =item * The API eval_sv() now accepts a C<G_RETHROW> flag. If this flag is set and an exception is thrown while compiling or executing the supplied code, it will be rethrown, and eval_sv() will not return. [L<perl #134177|https://rt.perl.org/Ticket/Display.html?id=134177>] =item * As part of the fix for [L<perl #2754|https://rt.perl.org/Ticket/Display.html?id=2754>] perl_parse() now returns non-zero if exit(0) is called in a C<BEGIN>, C<UNITCHECK> or C<CHECK> block. =item * Most functions which recursively walked an op tree during compilation have been made non-recursive. This avoids SEGVs from stack overflow when the op tree is deeply nested, such as C<$n == 1 ? "one" : $n == 2 ? "two" : ....> (especially in code which is auto-generated). This is particularly noticeable where the code is compiled within a separate thread, as threads tend to have small stacks by default. =back =head1 Selected Bug Fixes =over 4 =item * Previously L<perlfunc/require> would only treat the special built-in SV C<&PL_sv_undef> as a value in C<%INC> as if a previous C<require> has failed, treating other undefined SVs as if the previous C<require> has succeeded. This could cause unexpected success from C<require> e.g., on C<local %INC = %INC;>. This has been fixed. [L<GH #17428|https://github.com/Perl/perl5/issues/17428>] =item * C<(?{...})> eval groups in regular expressions no longer unintentionally trigger "EVAL without pos change exceeded limit in regex" [L<GH #17490|https://github.com/Perl/perl5/issues/17490>]. =item * C<(?[...])> extended bracketed character classes do not wrongly raise an error on some cases where a previously-compiled such class is interpolated into another. The heuristics previously used have been replaced by a reliable method, and hence the diagnostics generated have changed. See L</Diagnostics>. =item * The debug display (say by specifying C<-Dr> or S<C<use re>> (with appropriate options) of compiled Unicode property wildcard subpatterns no longer has extraneous output. =item * Fix an assertion failure in the regular expression engine. [L<GH #17372|https://github.com/Perl/perl5/issues/17372>] =item * Fix coredump in pp_hot.c after C<B::UNOP_AUX::aux_list()>. [L<GH #17301|https://github.com/Perl/perl5/issues/17301>] =item * Loading IO is now threadsafe. [L<GH #14816|https://github.com/Perl/perl5/issues/14816>] =item * C<\p{user-defined}> overrides official Unicode [L<GH #17025|https://github.com/Perl/perl5/issues/17025>] Prior to this patch, the override was only sometimes in effect. =item * Properly handle filled C</il> regnodes and multi-char folds =item * Compilation error during make minitest [L<GH #17293|https://github.com/Perl/perl5/issues/17293>] =item * Move the implementation of C<%->, C<%+> into core. =item * Read beyond buffer in C<grok_inf_nan> [L<GH #17370|https://github.com/Perl/perl5/issues/17370>] =item * Workaround glibc bug with C<LC_MESSAGES> [L<GH #17081|https://github.com/Perl/perl5/issues/17081>] =item * C<printf()> or C<sprintf()> with the C<%n> format could cause a panic on debugging builds, or report an incorrectly cached length value when producing C<SVfUTF8> flagged strings. [L<GH #17221|https://github.com/Perl/perl5/issues/17221>] =item * The tokenizer has been extensively refactored. [L<GH #17241|https://github.com/Perl/perl5/issues/17241>] [L<GH #17189|https://github.com/Perl/perl5/issues/17189>] =item * C<use strict "subs"> is now enforced for bareword constants optimized into a C<multiconcat> operator. [L<GH #17254|https://github.com/Perl/perl5/issues/17254>] =item * A memory leak in regular expression patterns has been fixed. [L<GH #17218|https://github.com/Perl/perl5/issues/17218>] =item * Perl no longer treats strings starting with "0x" or "0b" as hex or binary numbers respectively when converting a string to a number. This reverts a change in behaviour inadvertently introduced in perl 5.30.0 intended to improve precision when converting a string to a floating point number. [L<perl #134230|https://rt.perl.org/Ticket/Display.html?id=134230>] =item * Matching a non-C<SVf_UTF8> string against a regular expression containing unicode literals could leak a SV on each match attempt. [L<perl #134390|https://rt.perl.org/Ticket/Display.html?id=134390>] =item * Overloads for octal and binary floating point literals were always passed a string with a C<0x> prefix instead of the appropriate C<0> or C<0b> prefix. [L<perl #125557|https://rt.perl.org/Ticket/Display.html?id=125557>] =item * C<< $@ = 100; die; >> now correctly propagates the 100 as an exception instead of ignoring it. [L<perl #134291|https://rt.perl.org/Ticket/Display.html?id=134291>] =item * C<< 0 0x@ >> no longer asserts in S_no_op(). [L<perl #134310|https://rt.perl.org/Ticket/Display.html?id=134310>] =item * Exceptions thrown while C<$@> is read-only could result in infinite recursion as perl tried to update C<$@>, which throws another exception, resulting in a stack overflow. Perl now replaces C<$@> with a copy if it's not a simple writable SV. [L<perl #134266|https://rt.perl.org/Ticket/Display.html?id=134266>] =item * Setting C<$)> now properly sets supplementary group ids if you have the necessary privileges. [L<perl #134169|https://rt.perl.org/Ticket/Display.html?id=134169>] =item * close() on a pipe now preemptively clears the PerlIO object from the IO SV. This prevents a second attempt to close the already closed PerlIO object if a signal handler calls die() or exit() while close() is waiting for the child process to complete. [L<perl #122112|https://rt.perl.org/Ticket/Display.html?id=122112>] =item * C<< sprintf("%.*a", -10000, $x) >> would cause a buffer overflow due to mishandling of the negative precision value. [L<perl #134008|https://rt.perl.org/Ticket/Display.html?id=134008>] =item * scalar() on a reference could cause an erroneous assertion failure during compilation. [L<perl #134045|https://rt.perl.org/Ticket/Display.html?id=134045>] =item * C<%{^CAPTURE_ALL}> is now an alias to C<%-> as documented, rather than incorrectly an alias for C<%+>. [L<perl #131867|https://rt.perl.org/Ticket/Display.html?id=131867>] =item * C<%{^CAPTURE}> didn't work if C<@{^CAPTURE}> was mentioned first. Similarly for C<%{^CAPTURE_ALL}> and C<@{^CAPTURE_ALL}>, though C<@{^CAPTURE_ALL}> currently isn't used. [L<perl #134193|https://rt.perl.org/Ticket/Display.html?id=134193>] =item * Extraordinarily large (over 2GB) floating point format widths could cause an integer overflow in the underlying call to snprintf(), resulting in an assertion. Formatted floating point widths are now limited to the range of int, the return value of snprintf(). [L<perl #133913|https://rt.perl.org/Ticket/Display.html?id=133913>] =item * Parsing the following constructs within a sub-parse (such as with C<"${code here}"> or C<s/.../code here/e>) has changed to match how they're parsed normally: =over =item * C<print $fh ...> no longer produces a syntax error. =item * Code like C<s/.../ ${time} /e> now properly produces an "Ambiguous use of ${time} resolved to $time at ..." warning when warnings are enabled. =item * C<@x {"a"}> (with the space) in a sub-parse now properly produces a "better written as" warning when warnings are enabled. =item * Attributes can now be used in a sub-parse. [L<perl #133850|https://rt.perl.org/Ticket/Display.html?id=133850>] =back =item * Incomplete hex and binary literals like C<0x> and C<0b> are now treated as if the C<x> or C<b> is part of the next token. [L<perl #134125|https://rt.perl.org/Ticket/Display.html?id=134125>] =item * A spurious C<)> in a subparse, such as in C<s/.../code here/e> or C<"...${code here}">, no longer confuses the parser. Previously a subparse was bracketed with generated C<(> and C<)> tokens, so a spurious C<)> would close the construct without doing the normal subparse clean up, confusing the parser and possible causing an assertion failure. Such constructs are now surrounded by artificial tokens that can't be included in the source. [L<perl #130585|https://rt.perl.org/Ticket/Display.html?id=130585>] =item * Reference assignment of a sub, such as C<\&foo = \&bar;>, silently did nothing in the C<main::> package. [L<perl #134072|https://rt.perl.org/Ticket/Display.html?id=134072>] =item * sv_gets() now recovers better if the target SV is modified by a signal handler. [L<perl #134035|https://rt.perl.org/Ticket/Display.html?id=134035>] =item * C<readline @foo> now evaluates C<@foo> in scalar context. Previously it would be evaluated in list context, and since readline() pops only one argument from the stack, the stack could underflow, or be left with unexpected values on the stack. [L<perl #133989|https://rt.perl.org/Ticket/Display.html?id=133989>] =item * Parsing incomplete hex or binary literals was changed in 5.31.1 to treat such a literal as just the 0, leaving the following C<x> or C<b> to be parsed as part of the next token. This could lead to some silent changes in behaviour, so now incomplete hex or binary literals produce a fatal error. [L<perl #134125|https://rt.perl.org/Ticket/Display.html?id=134125>] =item * eval_pv()'s I<croak_on_error> flag will now throw even if the exception is a false overloaded value. [L<perl #134177|https://rt.perl.org/Ticket/Display.html?id=134177>] =item * C<INIT> blocks and the program itself are no longer run if exit(0) is called within a C<BEGIN>, C<UNITCHECK> or C<CHECK> block. [L<perl #2754|https://rt.perl.org/Ticket/Display.html?id=2754>] =item * C<< open my $fh, ">>+", undef >> now opens the temporary file in append mode: writes will seek to the end of file before writing. [L<perl #134221|https://rt.perl.org/Ticket/Display.html?id=134221>] =item * Fixed a SEGV when searching for the source of an uninitialized value warning on an op whose subtree includes an OP_MULTIDEREF. [L<perl #134275|https://rt.perl.org/Ticket/Display.html?id=134275>] =back =head1 Obituary Jeff Goff (JGOFF or DrForr), an integral part of the Perl and Raku communities and a dear friend to all of us, has passed away on March 13th, 2020. DrForr was a prominent member of the communities, attending and speaking at countless events, contributing to numerous projects, and assisting and helping in any way he could. His passing leaves a hole in our hearts and in our communities and he will be sorely missed. =head1 Acknowledgements Perl 5.32.0 represents approximately 13 months of development since Perl 5.30.0 and contains approximately 220,000 lines of changes across 1,800 files from 89 authors. Excluding auto-generated files, documentation and release tools, there were approximately 140,000 lines of changes to 880 .pm, .t, .c and .h files. Perl continues to flourish into its fourth decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.32.0: Aaron Crane, Alberto Simões, Alexandr Savca, Andreas König, Andrew Fresh, Andy Dougherty, Ask Bjørn Hansen, Atsushi Sugawara, Bernhard M. Wiedemann, brian d foy, Bryan Stenson, Chad Granum, Chase Whitener, Chris 'BinGOs' Williams, Craig A. Berry, Dagfinn Ilmari Mannsåker, Dan Book, Daniel Dragan, Dan Kogai, Dave Cross, Dave Rolsky, David Cantrell, David Mitchell, Dominic Hargreaves, E. Choroba, Felipe Gasper, Florian Weimer, Graham Knop, Håkon Hægland, Hauke D, H.Merijn Brand, Hugo van der Sanden, Ichinose Shogo, James E Keenan, Jason McIntosh, Jerome Duval, Johan Vromans, John Lightsey, John Paul Adrian Glaubitz, Kang-min Liu, Karen Etheridge, Karl Williamson, Leon Timmermans, Manuel Mausz, Marc Green, Matthew Horsfall, Matt Turner, Max Maischein, Michael Haardt, Nicholas Clark, Nicolas R., Niko Tyni, Pali, Paul Evans, Paul Johnson, Paul Marquess, Peter Eisentraut, Peter John Acklam, Peter Oliver, Petr Písař, Renee Baecker, Ricardo Signes, Richard Leach, Russ Allbery, Samuel Smith, Santtu Ojanperä, Sawyer X, Sergey Aleynikov, Sergiy Borodych, Shirakata Kentaro, Shlomi Fish, Sisyphus, Slaven Rezic, Smylers, Stefan Seifert, Steve Hay, Steve Peters, Svyatoslav, Thibault Duponchelle, Todd Rinaldo, Tomasz Konojacki, Tom Hukins, Tony Cook, Unicode Consortium, VanL, Vickenty Fesunov, Vitali Peil, Yves Orton, Zefram. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the perl bug database at L<https://github.com/Perl/perl5/issues>. There may also be information at L<http://www.perl.org/>, the Perl Home Page. If you believe you have an unreported bug, please open an issue at L<https://github.com/Perl/perl5/issues>. Be sure to trim your bug down to a tiny but sufficient test case. If the bug you are reporting has security implications which make it inappropriate to send to a public issue tracker, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 Give Thanks If you wish to thank the Perl 5 Porters for the work we had done in Perl 5, you can do so by running the C<perlthanks> program: perlthanks This will send an email to the Perl 5 Porters list with your show of thanks. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl581delta.pod 0000644 00000112254 15125556335 0007501 0 ustar 00 =head1 NAME perl581delta - what is new for perl v5.8.1 =head1 DESCRIPTION This document describes differences between the 5.8.0 release and the 5.8.1 release. If you are upgrading from an earlier release such as 5.6.1, first read the L<perl58delta>, which describes differences between 5.6.0 and 5.8.0. In case you are wondering about 5.6.1, it was bug-fix-wise rather identical to the development release 5.7.1. Confused? This timeline hopefully helps a bit: it lists the new major releases, their maintenance releases, and the development releases. New Maintenance Development 5.6.0 2000-Mar-22 5.7.0 2000-Sep-02 5.6.1 2001-Apr-08 5.7.1 2001-Apr-09 5.7.2 2001-Jul-13 5.7.3 2002-Mar-05 5.8.0 2002-Jul-18 5.8.1 2003-Sep-25 =head1 Incompatible Changes =head2 Hash Randomisation Mainly due to security reasons, the "random ordering" of hashes has been made even more random. Previously while the order of hash elements from keys(), values(), and each() was essentially random, it was still repeatable. Now, however, the order varies between different runs of Perl. B<Perl has never guaranteed any ordering of the hash keys>, and the ordering has already changed several times during the lifetime of Perl 5. Also, the ordering of hash keys has always been, and continues to be, affected by the insertion order. The added randomness may affect applications. One possible scenario is when output of an application has included hash data. For example, if you have used the Data::Dumper module to dump data into different files, and then compared the files to see whether the data has changed, now you will have false positives since the order in which hashes are dumped will vary. In general the cure is to sort the keys (or the values); in particular for Data::Dumper to use the C<Sortkeys> option. If some particular order is really important, use tied hashes: for example the Tie::IxHash module which by default preserves the order in which the hash elements were added. More subtle problem is reliance on the order of "global destruction". That is what happens at the end of execution: Perl destroys all data structures, including user data. If your destructors (the DESTROY subroutines) have assumed any particular ordering to the global destruction, there might be problems ahead. For example, in a destructor of one object you cannot assume that objects of any other class are still available, unless you hold a reference to them. If the environment variable PERL_DESTRUCT_LEVEL is set to a non-zero value, or if Perl is exiting a spawned thread, it will also destruct the ordinary references and the symbol tables that are no longer in use. You can't call a class method or an ordinary function on a class that has been collected that way. The hash randomisation is certain to reveal hidden assumptions about some particular ordering of hash elements, and outright bugs: it revealed a few bugs in the Perl core and core modules. To disable the hash randomisation in runtime, set the environment variable PERL_HASH_SEED to 0 (zero) before running Perl (for more information see L<perlrun/PERL_HASH_SEED>), or to disable the feature completely in compile time, compile with C<-DNO_HASH_SEED> (see F<INSTALL>). See L<perlsec/"Algorithmic Complexity Attacks"> for the original rationale behind this change. =head2 UTF-8 On Filehandles No Longer Activated By Locale In Perl 5.8.0 all filehandles, including the standard filehandles, were implicitly set to be in Unicode UTF-8 if the locale settings indicated the use of UTF-8. This feature caused too many problems, so the feature was turned off and redesigned: see L</"Core Enhancements">. =head2 Single-number v-strings are no longer v-strings before "=>" The version strings or v-strings (see L<perldata/"Version Strings">) feature introduced in Perl 5.6.0 has been a source of some confusion-- especially when the user did not want to use it, but Perl thought it knew better. Especially troublesome has been the feature that before a "=>" a version string (a "v" followed by digits) has been interpreted as a v-string instead of a string literal. In other words: %h = ( v65 => 42 ); has meant since Perl 5.6.0 %h = ( 'A' => 42 ); (at least in platforms of ASCII progeny) Perl 5.8.1 restores the more natural interpretation %h = ( 'v65' => 42 ); The multi-number v-strings like v65.66 and 65.66.67 still continue to be v-strings in Perl 5.8. =head2 (Win32) The -C Switch Has Been Repurposed The -C switch has changed in an incompatible way. The old semantics of this switch only made sense in Win32 and only in the "use utf8" universe in 5.6.x releases, and do not make sense for the Unicode implementation in 5.8.0. Since this switch could not have been used by anyone, it has been repurposed. The behavior that this switch enabled in 5.6.x releases may be supported in a transparent, data-dependent fashion in a future release. For the new life of this switch, see L</"UTF-8 no longer default under UTF-8 locales">, and L<perlrun/-C>. =head2 (Win32) The /d Switch Of cmd.exe Perl 5.8.1 uses the /d switch when running the cmd.exe shell internally for system(), backticks, and when opening pipes to external programs. The extra switch disables the execution of AutoRun commands from the registry, which is generally considered undesirable when running external programs. If you wish to retain compatibility with the older behavior, set PERL5SHELL in your environment to C<cmd /x/c>. =head1 Core Enhancements =head2 UTF-8 no longer default under UTF-8 locales In Perl 5.8.0 many Unicode features were introduced. One of them was found to be of more nuisance than benefit: the automagic (and silent) "UTF-8-ification" of filehandles, including the standard filehandles, if the user's locale settings indicated use of UTF-8. For example, if you had C<en_US.UTF-8> as your locale, your STDIN and STDOUT were automatically "UTF-8", in other words an implicit binmode(..., ":utf8") was made. This meant that trying to print, say, chr(0xff), ended up printing the bytes 0xc3 0xbf. Hardly what you had in mind unless you were aware of this feature of Perl 5.8.0. The problem is that the vast majority of people weren't: for example in RedHat releases 8 and 9 the B<default> locale setting is UTF-8, so all RedHat users got UTF-8 filehandles, whether they wanted it or not. The pain was intensified by the Unicode implementation of Perl 5.8.0 (still) having nasty bugs, especially related to the use of s/// and tr///. (Bugs that have been fixed in 5.8.1) Therefore a decision was made to backtrack the feature and change it from implicit silent default to explicit conscious option. The new Perl command line option C<-C> and its counterpart environment variable PERL_UNICODE can now be used to control how Perl and Unicode interact at interfaces like I/O and for example the command line arguments. See L<perlrun/-C> and L<perlrun/PERL_UNICODE> for more information. =head2 Unsafe signals again available In Perl 5.8.0 the so-called "safe signals" were introduced. This means that Perl no longer handles signals immediately but instead "between opcodes", when it is safe to do so. The earlier immediate handling easily could corrupt the internal state of Perl, resulting in mysterious crashes. However, the new safer model has its problems too. Because now an opcode, a basic unit of Perl execution, is never interrupted but instead let to run to completion, certain operations that can take a long time now really do take a long time. For example, certain network operations have their own blocking and timeout mechanisms, and being able to interrupt them immediately would be nice. Therefore perl 5.8.1 introduces a "backdoor" to restore the pre-5.8.0 (pre-5.7.3, really) signal behaviour. Just set the environment variable PERL_SIGNALS to C<unsafe>, and the old immediate (and unsafe) signal handling behaviour returns. See L<perlrun/PERL_SIGNALS> and L<perlipc/"Deferred Signals (Safe Signals)">. In completely unrelated news, you can now use safe signals with POSIX::SigAction. See L<POSIX/POSIX::SigAction>. =head2 Tied Arrays with Negative Array Indices Formerly, the indices passed to C<FETCH>, C<STORE>, C<EXISTS>, and C<DELETE> methods in tied array class were always non-negative. If the actual argument was negative, Perl would call FETCHSIZE implicitly and add the result to the index before passing the result to the tied array method. This behaviour is now optional. If the tied array class contains a package variable named C<$NEGATIVE_INDICES> which is set to a true value, negative values will be passed to C<FETCH>, C<STORE>, C<EXISTS>, and C<DELETE> unchanged. =head2 local ${$x} The syntaxes local ${$x} local @{$x} local %{$x} now do localise variables, given that the $x is a valid variable name. =head2 Unicode Character Database 4.0.0 The copy of the Unicode Character Database included in Perl 5.8 has been updated to 4.0.0 from 3.2.0. This means for example that the Unicode character properties are as in Unicode 4.0.0. =head2 Deprecation Warnings There is one new feature deprecation. Perl 5.8.0 forgot to add some deprecation warnings, these warnings have now been added. Finally, a reminder of an impending feature removal. =head3 (Reminder) Pseudo-hashes are deprecated (really) Pseudo-hashes were deprecated in Perl 5.8.0 and will be removed in Perl 5.10.0, see L<perl58delta> for details. Each attempt to access pseudo-hashes will trigger the warning C<Pseudo-hashes are deprecated>. If you really want to continue using pseudo-hashes but not to see the deprecation warnings, use: no warnings 'deprecated'; Or you can continue to use the L<fields> pragma, but please don't expect the data structures to be pseudohashes any more. =head3 (Reminder) 5.005-style threads are deprecated (really) 5.005-style threads (activated by C<use Thread;>) were deprecated in Perl 5.8.0 and will be removed after Perl 5.8, see L<perl58delta> for details. Each 5.005-style thread creation will trigger the warning C<5.005 threads are deprecated>. If you really want to continue using the 5.005 threads but not to see the deprecation warnings, use: no warnings 'deprecated'; =head3 (Reminder) The $* variable is deprecated (really) The C<$*> variable controlling multi-line matching has been deprecated and will be removed after 5.8. The variable has been deprecated for a long time, and a deprecation warning C<Use of $* is deprecated> is given, now the variable will just finally be removed. The functionality has been supplanted by the C</s> and C</m> modifiers on pattern matching. If you really want to continue using the C<$*>-variable but not to see the deprecation warnings, use: no warnings 'deprecated'; =head2 Miscellaneous Enhancements C<map> in void context is no longer expensive. C<map> is now context aware, and will not construct a list if called in void context. If a socket gets closed by the server while printing to it, the client now gets a SIGPIPE. While this new feature was not planned, it fell naturally out of PerlIO changes, and is to be considered an accidental feature. PerlIO::get_layers(FH) returns the names of the PerlIO layers active on a filehandle. PerlIO::via layers can now have an optional UTF8 method to indicate whether the layer wants to "auto-:utf8" the stream. utf8::is_utf8() has been added as a quick way to test whether a scalar is encoded internally in UTF-8 (Unicode). =head1 Modules and Pragmata =head2 Updated Modules And Pragmata The following modules and pragmata have been updated since Perl 5.8.0: =over 4 =item base =item B::Bytecode In much better shape than it used to be. Still far from perfect, but maybe worth a try. =item B::Concise =item B::Deparse =item Benchmark An optional feature, C<:hireswallclock>, now allows for high resolution wall clock times (uses Time::HiRes). =item ByteLoader See B::Bytecode. =item bytes Now has bytes::substr. =item CGI =item charnames One can now have custom character name aliases. =item CPAN There is now a simple command line frontend to the CPAN.pm module called F<cpan>. =item Data::Dumper A new option, Pair, allows choosing the separator between hash keys and values. =item DB_File =item Devel::PPPort =item Digest::MD5 =item Encode Significant updates on the encoding pragma functionality (tr/// and the DATA filehandle, formats). If a filehandle has been marked as to have an encoding, unmappable characters are detected already during input, not later (when the corrupted data is being used). The ISO 8859-6 conversion table has been corrected (the 0x30..0x39 erroneously mapped to U+0660..U+0669, instead of U+0030..U+0039). The GSM 03.38 conversion did not handle escape sequences correctly. The UTF-7 encoding has been added (making Encode feature-complete with Unicode::String). =item fields =item libnet =item Math::BigInt A lot of bugs have been fixed since v1.60, the version included in Perl v5.8.0. Especially noteworthy are the bug in Calc that caused div and mod to fail for some large values, and the fixes to the handling of bad inputs. Some new features were added, e.g. the broot() method, you can now pass parameters to config() to change some settings at runtime, and it is now possible to trap the creation of NaN and infinity. As usual, some optimizations took place and made the math overall a tad faster. In some cases, quite a lot faster, actually. Especially alternative libraries like Math::BigInt::GMP benefit from this. In addition, a lot of the quite clunky routines like fsqrt() and flog() are now much much faster. =item MIME::Base64 =item NEXT Diamond inheritance now works. =item Net::Ping =item PerlIO::scalar Reading from non-string scalars (like the special variables, see L<perlvar>) now works. =item podlators =item Pod::LaTeX =item PodParsers =item Pod::Perldoc Complete rewrite. As a side-effect, no longer refuses to startup when run by root. =item Scalar::Util New utilities: refaddr, isvstring, looks_like_number, set_prototype. =item Storable Can now store code references (via B::Deparse, so not foolproof). =item strict Earlier versions of the strict pragma did not check the parameters implicitly passed to its "import" (use) and "unimport" (no) routine. This caused the false idiom such as: use strict qw(@ISA); @ISA = qw(Foo); This however (probably) raised the false expectation that the strict refs, vars and subs were being enforced (and that @ISA was somehow "declared"). But the strict refs, vars, and subs are B<not> enforced when using this false idiom. Starting from Perl 5.8.1, the above B<will> cause an error to be raised. This may cause programs which used to execute seemingly correctly without warnings and errors to fail when run under 5.8.1. This happens because use strict qw(@ISA); will now fail with the error: Unknown 'strict' tag(s) '@ISA' The remedy to this problem is to replace this code with the correct idiom: use strict; use vars qw(@ISA); @ISA = qw(Foo); =item Term::ANSIcolor =item Test::Harness Now much more picky about extra or missing output from test scripts. =item Test::More =item Test::Simple =item Text::Balanced =item Time::HiRes Use of nanosleep(), if available, allows mixing subsecond sleeps with alarms. =item threads Several fixes, for example for join() problems and memory leaks. In some platforms (like Linux) that use glibc the minimum memory footprint of one ithread has been reduced by several hundred kilobytes. =item threads::shared Many memory leaks have been fixed. =item Unicode::Collate =item Unicode::Normalize =item Win32::GetFolderPath =item Win32::GetOSVersion Now returns extra information. =back =head1 Utility Changes The C<h2xs> utility now produces a more modern layout: F<Foo-Bar/lib/Foo/Bar.pm> instead of F<Foo/Bar/Bar.pm>. Also, the boilerplate test is now called F<t/Foo-Bar.t> instead of F<t/1.t>. The Perl debugger (F<lib/perl5db.pl>) has now been extensively documented and bugs found while documenting have been fixed. C<perldoc> has been rewritten from scratch to be more robust and feature rich. C<perlcc -B> works now at least somewhat better, while C<perlcc -c> is rather more broken. (The Perl compiler suite as a whole continues to be experimental.) =head1 New Documentation perl573delta has been added to list the differences between the (now quite obsolete) development releases 5.7.2 and 5.7.3. perl58delta has been added: it is the perldelta of 5.8.0, detailing the differences between 5.6.0 and 5.8.0. perlartistic has been added: it is the Artistic License in pod format, making it easier for modules to refer to it. perlcheat has been added: it is a Perl cheat sheet. perlgpl has been added: it is the GNU General Public License in pod format, making it easier for modules to refer to it. perlmacosx has been added to tell about the installation and use of Perl in Mac OS X. perlos400 has been added to tell about the installation and use of Perl in OS/400 PASE. perlreref has been added: it is a regular expressions quick reference. =head1 Installation and Configuration Improvements The Unix standard Perl location, F</usr/bin/perl>, is no longer overwritten by default if it exists. This change was very prudent because so many Unix vendors already provide a F</usr/bin/perl>, but simultaneously many system utilities may depend on that exact version of Perl, so better not to overwrite it. One can now specify installation directories for site and vendor man and HTML pages, and site and vendor scripts. See F<INSTALL>. One can now specify a destination directory for Perl installation by specifying the DESTDIR variable for C<make install>. (This feature is slightly different from the previous C<Configure -Dinstallprefix=...>.) See F<INSTALL>. gcc versions 3.x introduced a new warning that caused a lot of noise during Perl compilation: C<gcc -Ialreadyknowndirectory (warning: changing search order)>. This warning has now been avoided by Configure weeding out such directories before the compilation. One can now build subsets of Perl core modules by using the Configure flags C<-Dnoextensions=...> and C<-Donlyextensions=...>, see F<INSTALL>. =head2 Platform-specific enhancements In Cygwin Perl can now be built with threads (C<Configure -Duseithreads>). This works with both Cygwin 1.3.22 and Cygwin 1.5.3. In newer FreeBSD releases Perl 5.8.0 compilation failed because of trying to use F<malloc.h>, which in FreeBSD is just a dummy file, and a fatal error to even try to use. Now F<malloc.h> is not used. Perl is now known to build also in Hitachi HI-UXMPP. Perl is now known to build again in LynxOS. Mac OS X now installs with Perl version number embedded in installation directory names for easier upgrading of user-compiled Perl, and the installation directories in general are more standard. In other words, the default installation no longer breaks the Apple-provided Perl. On the other hand, with C<Configure -Dprefix=/usr> you can now really replace the Apple-supplied Perl (B<please be careful>). Mac OS X now builds Perl statically by default. This change was done mainly for faster startup times. The Apple-provided Perl is still dynamically linked and shared, and you can enable the sharedness for your own Perl builds by C<Configure -Duseshrplib>. Perl has been ported to IBM's OS/400 PASE environment. The best way to build a Perl for PASE is to use an AIX host as a cross-compilation environment. See README.os400. Yet another cross-compilation option has been added: now Perl builds on OpenZaurus, a Linux distribution based on Mandrake + Embedix for the Sharp Zaurus PDA. See the Cross/README file. Tru64 when using gcc 3 drops the optimisation for F<toke.c> to C<-O2> because of gigantic memory use with the default C<-O3>. Tru64 can now build Perl with the newer Berkeley DBs. Building Perl on WinCE has been much enhanced, see F<README.ce> and F<README.perlce>. =head1 Selected Bug Fixes =head2 Closures, eval and lexicals There have been many fixes in the area of anonymous subs, lexicals and closures. Although this means that Perl is now more "correct", it is possible that some existing code will break that happens to rely on the faulty behaviour. In practice this is unlikely unless your code contains a very complex nesting of anonymous subs, evals and lexicals. =head2 Generic fixes If an input filehandle is marked C<:utf8> and Perl sees illegal UTF-8 coming in when doing C<< <FH> >>, if warnings are enabled a warning is immediately given - instead of being silent about it and Perl being unhappy about the broken data later. (The C<:encoding(utf8)> layer also works the same way.) binmode(SOCKET, ":utf8") only worked on the input side, not on the output side of the socket. Now it works both ways. For threaded Perls certain system database functions like getpwent() and getgrent() now grow their result buffer dynamically, instead of failing. This means that at sites with lots of users and groups the functions no longer fail by returning only partial results. Perl 5.8.0 had accidentally broken the capability for users to define their own uppercase<->lowercase Unicode mappings (as advertised by the Camel). This feature has been fixed and is also documented better. In 5.8.0 this $some_unicode .= <FH>; didn't work correctly but instead corrupted the data. This has now been fixed. Tied methods like FETCH etc. may now safely access tied values, i.e. resulting in a recursive call to FETCH etc. Remember to break the recursion, though. At startup Perl blocks the SIGFPE signal away since there isn't much Perl can do about it. Previously this blocking was in effect also for programs executed from within Perl. Now Perl restores the original SIGFPE handling routine, whatever it was, before running external programs. Linenumbers in Perl scripts may now be greater than 65536, or 2**16. (Perl scripts have always been able to be larger than that, it's just that the linenumber for reported errors and warnings have "wrapped around".) While scripts that large usually indicate a need to rethink your code a bit, such Perl scripts do exist, for example as results from generated code. Now linenumbers can go all the way to 4294967296, or 2**32. =head2 Platform-specific fixes Linux =over 4 =item * Setting $0 works again (with certain limitations that Perl cannot do much about: see L<perlvar/$0>) =back HP-UX =over 4 =item * Setting $0 now works. =back VMS =over 4 =item * Configuration now tests for the presence of C<poll()>, and IO::Poll now uses the vendor-supplied function if detected. =item * A rare access violation at Perl start-up could occur if the Perl image was installed with privileges or if there was an identifier with the subsystem attribute set in the process's rightslist. Either of these circumstances triggered tainting code that contained a pointer bug. The faulty pointer arithmetic has been fixed. =item * The length limit on values (not keys) in the %ENV hash has been raised from 255 bytes to 32640 bytes (except when the PERL_ENV_TABLES setting overrides the default use of logical names for %ENV). If it is necessary to access these long values from outside Perl, be aware that they are implemented using search list logical names that store the value in pieces, each 255-byte piece (up to 128 of them) being an element in the search list. When doing a lookup in %ENV from within Perl, the elements are combined into a single value. The existing VMS-specific ability to access individual elements of a search list logical name via the $ENV{'foo;N'} syntax (where N is the search list index) is unimpaired. =item * The piping implementation now uses local rather than global DCL symbols for inter-process communication. =item * File::Find could become confused when navigating to a relative directory whose name collided with a logical name. This problem has been corrected by adding directory syntax to relative path names, thus preventing logical name translation. =back Win32 =over 4 =item * A memory leak in the fork() emulation has been fixed. =item * The return value of the ioctl() built-in function was accidentally broken in 5.8.0. This has been corrected. =item * The internal message loop executed by perl during blocking operations sometimes interfered with messages that were external to Perl. This often resulted in blocking operations terminating prematurely or returning incorrect results, when Perl was executing under environments that could generate Windows messages. This has been corrected. =item * Pipes and sockets are now automatically in binary mode. =item * The four-argument form of select() did not preserve $! (errno) properly when there were errors in the underlying call. This is now fixed. =item * The "CR CR LF" problem of has been fixed, binmode(FH, ":crlf") is now effectively a no-op. =back =head1 New or Changed Diagnostics All the warnings related to pack() and unpack() were made more informative and consistent. =head2 Changed "A thread exited while %d threads were running" The old version A thread exited while %d other threads were still running was misleading because the "other" included also the thread giving the warning. =head2 Removed "Attempt to clear a restricted hash" It is not illegal to clear a restricted hash, so the warning was removed. =head2 New "Illegal declaration of anonymous subroutine" You must specify the block of code for C<sub>. =head2 Changed "Invalid range "%s" in transliteration operator" The old version Invalid [] range "%s" in transliteration operator was simply wrong because there are no "[] ranges" in tr///. =head2 New "Missing control char name in \c" Self-explanatory. =head2 New "Newline in left-justified string for %s" The padding spaces would appear after the newline, which is probably not what you had in mind. =head2 New "Possible precedence problem on bitwise %c operator" If you think this $x & $y == 0 tests whether the bitwise AND of $x and $y is zero, you will like this warning. =head2 New "Pseudo-hashes are deprecated" This warning should have been already in 5.8.0, since they are. =head2 New "read() on %s filehandle %s" You cannot read() (or sysread()) from a closed or unopened filehandle. =head2 New "5.005 threads are deprecated" This warning should have been already in 5.8.0, since they are. =head2 New "Tied variable freed while still in use" Something pulled the plug on a live tied variable, Perl plays safe by bailing out. =head2 New "To%s: illegal mapping '%s'" An illegal user-defined Unicode casemapping was specified. =head2 New "Use of freed value in iteration" Something modified the values being iterated over. This is not good. =head1 Changed Internals These news matter to you only if you either write XS code or like to know about or hack Perl internals (using Devel::Peek or any of the C<B::> modules counts), or like to run Perl with the C<-D> option. The embedding examples of L<perlembed> have been reviewed to be up to date and consistent: for example, the correct use of PERL_SYS_INIT3() and PERL_SYS_TERM(). Extensive reworking of the pad code (the code responsible for lexical variables) has been conducted by Dave Mitchell. Extensive work on the v-strings by John Peacock. UTF-8 length and position cache: to speed up the handling of Unicode (UTF-8) scalars, a cache was introduced. Potential problems exist if an extension bypasses the official APIs and directly modifies the PV of an SV: the UTF-8 cache does not get cleared as it should. APIs obsoleted in Perl 5.8.0, like sv_2pv, sv_catpvn, sv_catsv, sv_setsv, are again available. Certain Perl core C APIs like cxinc and regatom are no longer available at all to code outside the Perl core of the Perl core extensions. This is intentional. They never should have been available with the shorter names, and if you application depends on them, you should (be ashamed and) contact perl5-porters to discuss what are the proper APIs. Certain Perl core C APIs like C<Perl_list> are no longer available without their C<Perl_> prefix. If your XS module stops working because some functions cannot be found, in many cases a simple fix is to add the C<Perl_> prefix to the function and the thread context C<aTHX_> as the first argument of the function call. This is also how it should always have been done: letting the Perl_-less forms to leak from the core was an accident. For cleaner embedding you can also force this for all APIs by defining at compile time the cpp define PERL_NO_SHORT_NAMES. Perl_save_bool() has been added. Regexp objects (those created with C<qr>) now have S-magic rather than R-magic. This fixed regexps of the form /...(??{...;$x})/ to no longer ignore changes made to $x. The S-magic avoids dropping the caching optimization and making (??{...}) constructs obscenely slow (and consequently useless). See also L<perlguts/"Magic Variables">. Regexp::Copy was affected by this change. The Perl internal debugging macros DEBUG() and DEB() have been renamed to PERL_DEBUG() and PERL_DEB() to avoid namespace conflicts. C<-DL> removed (the leaktest had been broken and unsupported for years, use alternative debugging mallocs or tools like valgrind and Purify). Verbose modifier C<v> added for C<-DXv> and C<-Dsv>, see L<perlrun>. =head1 New Tests In Perl 5.8.0 there were about 69000 separate tests in about 700 test files, in Perl 5.8.1 there are about 77000 separate tests in about 780 test files. The exact numbers depend on the Perl configuration and on the operating system platform. =head1 Known Problems The hash randomisation mentioned in L</Incompatible Changes> is definitely problematic: it will wake dormant bugs and shake out bad assumptions. If you want to use mod_perl 2.x with Perl 5.8.1, you will need mod_perl-1.99_10 or higher. Earlier versions of mod_perl 2.x do not work with the randomised hashes. (mod_perl 1.x works fine.) You will also need Apache::Test 1.04 or higher. Many of the rarer platforms that worked 100% or pretty close to it with perl 5.8.0 have been left a little bit untended since their maintainers have been otherwise busy lately, and therefore there will be more failures on those platforms. Such platforms include Mac OS Classic, IBM z/OS (and other EBCDIC platforms), and NetWare. The most common Perl platforms (Unix and Unix-like, Microsoft platforms, and VMS) have large enough testing and expert population that they are doing well. =head2 Tied hashes in scalar context Tied hashes do not currently return anything useful in scalar context, for example when used as boolean tests: if (%tied_hash) { ... } The current nonsensical behaviour is always to return false, regardless of whether the hash is empty or has elements. The root cause is that there is no interface for the implementors of tied hashes to implement the behaviour of a hash in scalar context. =head2 Net::Ping 450_service and 510_ping_udp failures The subtests 9 and 18 of lib/Net/Ping/t/450_service.t, and the subtest 2 of lib/Net/Ping/t/510_ping_udp.t might fail if you have an unusual networking setup. For example in the latter case the test is trying to send a UDP ping to the IP address 127.0.0.1. =head2 B::C The C-generating compiler backend B::C (the frontend being C<perlcc -c>) is even more broken than it used to be because of the extensive lexical variable changes. (The good news is that B::Bytecode and ByteLoader are better than they used to be.) =head1 Platform Specific Problems =head2 EBCDIC Platforms IBM z/OS and other EBCDIC platforms continue to be problematic regarding Unicode support. Many Unicode tests are skipped when they really should be fixed. =head2 Cygwin 1.5 problems In Cygwin 1.5 the F<io/tell> and F<op/sysio> tests have failures for some yet unknown reason. In 1.5.5 the threads tests stress_cv, stress_re, and stress_string are failing unless the environment variable PERLIO is set to "perlio" (which makes also the io/tell failure go away). Perl 5.8.1 does build and work well with Cygwin 1.3: with (uname -a) C<CYGWIN_NT-5.0 ... 1.3.22(0.78/3/2) 2003-03-18 09:20 i686 ...> a 100% "make test" was achieved with C<Configure -des -Duseithreads>. =head2 HP-UX: HP cc warnings about sendfile and sendpath With certain HP C compiler releases (e.g. B.11.11.02) you will get many warnings like this (lines wrapped for easier reading): cc: "/usr/include/sys/socket.h", line 504: warning 562: Redeclaration of "sendfile" with a different storage class specifier: "sendfile" will have internal linkage. cc: "/usr/include/sys/socket.h", line 505: warning 562: Redeclaration of "sendpath" with a different storage class specifier: "sendpath" will have internal linkage. The warnings show up both during the build of Perl and during certain lib/ExtUtils tests that invoke the C compiler. The warning, however, is not serious and can be ignored. =head2 IRIX: t/uni/tr_7jis.t falsely failing The test t/uni/tr_7jis.t is known to report failure under 'make test' or the test harness with certain releases of IRIX (at least IRIX 6.5 and MIPSpro Compilers Version 7.3.1.1m), but if run manually the test fully passes. =head2 Mac OS X: no usemymalloc The Perl malloc (C<-Dusemymalloc>) does not work at all in Mac OS X. This is not that serious, though, since the native malloc works just fine. =head2 Tru64: No threaded builds with GNU cc (gcc) In the latest Tru64 releases (e.g. v5.1B or later) gcc cannot be used to compile a threaded Perl (-Duseithreads) because the system C<< <pthread.h> >> file doesn't know about gcc. =head2 Win32: sysopen, sysread, syswrite As of the 5.8.0 release, sysopen()/sysread()/syswrite() do not behave like they used to in 5.6.1 and earlier with respect to "text" mode. These built-ins now always operate in "binary" mode (even if sysopen() was passed the O_TEXT flag, or if binmode() was used on the file handle). Note that this issue should only make a difference for disk files, as sockets and pipes have always been in "binary" mode in the Windows port. As this behavior is currently considered a bug, compatible behavior may be re-introduced in a future release. Until then, the use of sysopen(), sysread() and syswrite() is not supported for "text" mode operations. =head1 Future Directions The following things B<might> happen in future. The first publicly available releases having these characteristics will be the developer releases Perl 5.9.x, culminating in the Perl 5.10.0 release. These are our best guesses at the moment: we reserve the right to rethink. =over 4 =item * PerlIO will become The Default. Currently (in Perl 5.8.x) the stdio library is still used if Perl thinks it can use certain tricks to make stdio go B<really> fast. For future releases our goal is to make PerlIO go even faster. =item * A new feature called I<assertions> will be available. This means that one can have code called assertions sprinkled in the code: usually they are optimised away, but they can be enabled with the C<-A> option. =item * A new operator C<//> (defined-or) will be available. This means that one will be able to say $a // $b instead of defined $a ? $a : $b and $c //= $d; instead of $c = $d unless defined $c; The operator will have the same precedence and associativity as C<||>. A source code patch against the Perl 5.8.1 sources will be available in CPAN as F<authors/id/H/HM/HMBRAND/dor-5.8.1.diff>. =item * C<unpack()> will default to unpacking the C<$_>. =item * Various Copy-On-Write techniques will be investigated in hopes of speeding up Perl. =item * CPANPLUS, Inline, and Module::Build will become core modules. =item * The ability to write true lexically scoped pragmas will be introduced. =item * Work will continue on the bytecompiler and byteloader. =item * v-strings as they currently exist are scheduled to be deprecated. The v-less form (1.2.3) will become a "version object" when used with C<use>, C<require>, and C<$VERSION>. $^V will also be a "version object" so the printf("%vd",...) construct will no longer be needed. The v-ful version (v1.2.3) will become obsolete. The equivalence of strings and v-strings (e.g. that currently 5.8.0 is equal to "\5\8\0") will go away. B<There may be no deprecation warning for v-strings>, though: it is quite hard to detect when v-strings are being used safely, and when they are not. =item * 5.005 Threads Will Be Removed =item * The C<$*> Variable Will Be Removed (it was deprecated a long time ago) =item * Pseudohashes Will Be Removed =back =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://bugs.perl.org/ . There may also be information at http://www.perl.com/ , the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. You can browse and search the Perl 5 bugs at http://bugs.perl.org/ =head1 SEE ALSO The F<Changes> file for exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlebcdic.pod 0000644 00000244571 15125556335 0007373 0 ustar 00 =encoding utf8 =head1 NAME perlebcdic - Considerations for running Perl on EBCDIC platforms =head1 DESCRIPTION An exploration of some of the issues facing Perl programmers on EBCDIC based computers. Portions of this document that are still incomplete are marked with XXX. Early Perl versions worked on some EBCDIC machines, but the last known version that ran on EBCDIC was v5.8.7, until v5.22, when the Perl core again works on z/OS. Theoretically, it could work on OS/400 or Siemens' BS2000 (or their successors), but this is untested. In v5.22 and 5.24, not all the modules found on CPAN but shipped with core Perl work on z/OS. If you want to use Perl on a non-z/OS EBCDIC machine, please let us know at L<https://github.com/Perl/perl5/issues>. Writing Perl on an EBCDIC platform is really no different than writing on an L</ASCII> one, but with different underlying numbers, as we'll see shortly. You'll have to know something about those L</ASCII> platforms because the documentation is biased and will frequently use example numbers that don't apply to EBCDIC. There are also very few CPAN modules that are written for EBCDIC and which don't work on ASCII; instead the vast majority of CPAN modules are written for ASCII, and some may happen to work on EBCDIC, while a few have been designed to portably work on both. If your code just uses the 52 letters A-Z and a-z, plus SPACE, the digits 0-9, and the punctuation characters that Perl uses, plus a few controls that are denoted by escape sequences like C<\n> and C<\t>, then there's nothing special about using Perl, and your code may very well work on an ASCII machine without change. But if you write code that uses C<\005> to mean a TAB or C<\xC1> to mean an "A", or C<\xDF> to mean a "E<yuml>" (small C<"y"> with a diaeresis), then your code may well work on your EBCDIC platform, but not on an ASCII one. That's fine to do if no one will ever want to run your code on an ASCII platform; but the bias in this document will be towards writing code portable between EBCDIC and ASCII systems. Again, if every character you care about is easily enterable from your keyboard, you don't have to know anything about ASCII, but many keyboards don't easily allow you to directly enter, say, the character C<\xDF>, so you have to specify it indirectly, such as by using the C<"\xDF"> escape sequence. In those cases it's easiest to know something about the ASCII/Unicode character sets. If you know that the small "E<yuml>" is C<U+00FF>, then you can instead specify it as C<"\N{U+FF}">, and have the computer automatically translate it to C<\xDF> on your platform, and leave it as C<\xFF> on ASCII ones. Or you could specify it by name, C<\N{LATIN SMALL LETTER Y WITH DIAERESIS> and not have to know the numbers. Either way works, but both require familiarity with Unicode. =head1 COMMON CHARACTER CODE SETS =head2 ASCII The American Standard Code for Information Interchange (ASCII or US-ASCII) is a set of integers running from 0 to 127 (decimal) that have standardized interpretations by the computers which use ASCII. For example, 65 means the letter "A". The range 0..127 can be covered by setting various bits in a 7-bit binary digit, hence the set is sometimes referred to as "7-bit ASCII". ASCII was described by the American National Standards Institute document ANSI X3.4-1986. It was also described by ISO 646:1991 (with localization for currency symbols). The full ASCII set is given in the table L<below|/recipe 3> as the first 128 elements. Languages that can be written adequately with the characters in ASCII include English, Hawaiian, Indonesian, Swahili and some Native American languages. Most non-EBCDIC character sets are supersets of ASCII. That is the integers 0-127 mean what ASCII says they mean. But integers 128 and above are specific to the character set. Many of these fit entirely into 8 bits, using ASCII as 0-127, while specifying what 128-255 mean, and not using anything above 255. Thus, these are single-byte (or octet if you prefer) character sets. One important one (since Unicode is a superset of it) is the ISO 8859-1 character set. =head2 ISO 8859 The ISO 8859-I<B<$n>> are a collection of character code sets from the International Organization for Standardization (ISO), each of which adds characters to the ASCII set that are typically found in various languages, many of which are based on the Roman, or Latin, alphabet. Most are for European languages, but there are also ones for Arabic, Greek, Hebrew, and Thai. There are good references on the web about all these. =head2 Latin 1 (ISO 8859-1) A particular 8-bit extension to ASCII that includes grave and acute accented Latin characters. Languages that can employ ISO 8859-1 include all the languages covered by ASCII as well as Afrikaans, Albanian, Basque, Catalan, Danish, Faroese, Finnish, Norwegian, Portuguese, Spanish, and Swedish. Dutch is covered albeit without the ij ligature. French is covered too but without the oe ligature. German can use ISO 8859-1 but must do so without German-style quotation marks. This set is based on Western European extensions to ASCII and is commonly encountered in world wide web work. In IBM character code set identification terminology, ISO 8859-1 is also known as CCSID 819 (or sometimes 0819 or even 00819). =head2 EBCDIC The Extended Binary Coded Decimal Interchange Code refers to a large collection of single- and multi-byte coded character sets that are quite different from ASCII and ISO 8859-1, and are all slightly different from each other; they typically run on host computers. The EBCDIC encodings derive from 8-bit byte extensions of Hollerith punched card encodings, which long predate ASCII. The layout on the cards was such that high bits were set for the upper and lower case alphabetic characters C<[a-z]> and C<[A-Z]>, but there were gaps within each Latin alphabet range, visible in the table L<below|/recipe 3>. These gaps can cause complications. Some IBM EBCDIC character sets may be known by character code set identification numbers (CCSID numbers) or code page numbers. Perl can be compiled on platforms that run any of three commonly used EBCDIC character sets, listed below. =head3 The 13 variant characters Among IBM EBCDIC character code sets there are 13 characters that are often mapped to different integer values. Those characters are known as the 13 "variant" characters and are: \ [ ] { } ^ ~ ! # | $ @ ` When Perl is compiled for a platform, it looks at all of these characters to guess which EBCDIC character set the platform uses, and adapts itself accordingly to that platform. If the platform uses a character set that is not one of the three Perl knows about, Perl will either fail to compile, or mistakenly and silently choose one of the three. The Line Feed (LF) character is actually a 14th variant character, and Perl checks for that as well. =head3 EBCDIC code sets recognized by Perl =over =item B<0037> Character code set ID 0037 is a mapping of the ASCII plus Latin-1 characters (i.e. ISO 8859-1) to an EBCDIC set. 0037 is used in North American English locales on the OS/400 operating system that runs on AS/400 computers. CCSID 0037 differs from ISO 8859-1 in 236 places; in other words they agree on only 20 code point values. =item B<1047> Character code set ID 1047 is also a mapping of the ASCII plus Latin-1 characters (i.e. ISO 8859-1) to an EBCDIC set. 1047 is used under Unix System Services for OS/390 or z/OS, and OpenEdition for VM/ESA. CCSID 1047 differs from CCSID 0037 in eight places, and from ISO 8859-1 in 236. =item B<POSIX-BC> The EBCDIC code page in use on Siemens' BS2000 system is distinct from 1047 and 0037. It is identified below as the POSIX-BC set. Like 0037 and 1047, it is the same as ISO 8859-1 in 20 code point values. =back =head2 Unicode code points versus EBCDIC code points In Unicode terminology a I<code point> is the number assigned to a character: for example, in EBCDIC the character "A" is usually assigned the number 193. In Unicode, the character "A" is assigned the number 65. All the code points in ASCII and Latin-1 (ISO 8859-1) have the same meaning in Unicode. All three of the recognized EBCDIC code sets have 256 code points, and in each code set, all 256 code points are mapped to equivalent Latin1 code points. Obviously, "A" will map to "A", "B" => "B", "%" => "%", etc., for all printable characters in Latin1 and these code pages. It also turns out that EBCDIC has nearly precise equivalents for the ASCII/Latin1 C0 controls and the DELETE control. (The C0 controls are those whose ASCII code points are 0..0x1F; things like TAB, ACK, BEL, etc.) A mapping is set up between these ASCII/EBCDIC controls. There isn't such a precise mapping between the C1 controls on ASCII platforms and the remaining EBCDIC controls. What has been done is to map these controls, mostly arbitrarily, to some otherwise unmatched character in the other character set. Most of these are very very rarely used nowadays in EBCDIC anyway, and their names have been dropped, without much complaint. For example the EO (Eight Ones) EBCDIC control (consisting of eight one bits = 0xFF) is mapped to the C1 APC control (0x9F), and you can't use the name "EO". The EBCDIC controls provide three possible line terminator characters, CR (0x0D), LF (0x25), and NL (0x15). On ASCII platforms, the symbols "NL" and "LF" refer to the same character, but in strict EBCDIC terminology they are different ones. The EBCDIC NL is mapped to the C1 control called "NEL" ("Next Line"; here's a case where the mapping makes quite a bit of sense, and hence isn't just arbitrary). On some EBCDIC platforms, this NL or NEL is the typical line terminator. This is true of z/OS and BS2000. In these platforms, the C compilers will swap the LF and NEL code points, so that C<"\n"> is 0x15, and refers to NL. Perl does that too; you can see it in the code chart L<below|/recipe 3>. This makes things generally "just work" without you even having to be aware that there is a swap. =head2 Unicode and UTF UTF stands for "Unicode Transformation Format". UTF-8 is an encoding of Unicode into a sequence of 8-bit byte chunks, based on ASCII and Latin-1. The length of a sequence required to represent a Unicode code point depends on the ordinal number of that code point, with larger numbers requiring more bytes. UTF-EBCDIC is like UTF-8, but based on EBCDIC. They are enough alike that often, casual usage will conflate the two terms, and use "UTF-8" to mean both the UTF-8 found on ASCII platforms, and the UTF-EBCDIC found on EBCDIC ones. You may see the term "invariant" character or code point. This simply means that the character has the same numeric value and representation when encoded in UTF-8 (or UTF-EBCDIC) as when not. (Note that this is a very different concept from L</The 13 variant characters> mentioned above. Careful prose will use the term "UTF-8 invariant" instead of just "invariant", but most often you'll see just "invariant".) For example, the ordinal value of "A" is 193 in most EBCDIC code pages, and also is 193 when encoded in UTF-EBCDIC. All UTF-8 (or UTF-EBCDIC) variant code points occupy at least two bytes when encoded in UTF-8 (or UTF-EBCDIC); by definition, the UTF-8 (or UTF-EBCDIC) invariant code points are exactly one byte whether encoded in UTF-8 (or UTF-EBCDIC), or not. (By now you see why people typically just say "UTF-8" when they also mean "UTF-EBCDIC". For the rest of this document, we'll mostly be casual about it too.) In ASCII UTF-8, the code points corresponding to the lowest 128 ordinal numbers (0 - 127: the ASCII characters) are invariant. In UTF-EBCDIC, there are 160 invariant characters. (If you care, the EBCDIC invariants are those characters which have ASCII equivalents, plus those that correspond to the C1 controls (128 - 159 on ASCII platforms).) A string encoded in UTF-EBCDIC may be longer (very rarely shorter) than one encoded in UTF-8. Perl extends both UTF-8 and UTF-EBCDIC so that they can encode code points above the Unicode maximum of U+10FFFF. Both extensions are constructed to allow encoding of any code point that fits in a 64-bit word. UTF-EBCDIC is defined by L<Unicode Technical Report #16|https://www.unicode.org/reports/tr16> (often referred to as just TR16). It is defined based on CCSID 1047, not allowing for the differences for other code pages. This allows for easy interchange of text between computers running different code pages, but makes it unusable, without adaptation, for Perl on those other code pages. The reason for this unusability is that a fundamental assumption of Perl is that the characters it cares about for parsing and lexical analysis are the same whether or not the text is in UTF-8. For example, Perl expects the character C<"["> to have the same representation, no matter if the string containing it (or program text) is UTF-8 encoded or not. To ensure this, Perl adapts UTF-EBCDIC to the particular code page so that all characters it expects to be UTF-8 invariant are in fact UTF-8 invariant. This means that text generated on a computer running one version of Perl's UTF-EBCDIC has to be translated to be intelligible to a computer running another. TR16 implies a method to extend UTF-EBCDIC to encode points up through S<C<2 ** 31 - 1>>. Perl uses this method for code points up through S<C<2 ** 30 - 1>>, but uses an incompatible method for larger ones, to enable it to handle much larger code points than otherwise. =head2 Using Encode Starting from Perl 5.8 you can use the standard module Encode to translate from EBCDIC to Latin-1 code points. Encode knows about more EBCDIC character sets than Perl can currently be compiled to run on. use Encode 'from_to'; my %ebcdic = ( 176 => 'cp37', 95 => 'cp1047', 106 => 'posix-bc' ); # $a is in EBCDIC code points from_to($a, $ebcdic{ord '^'}, 'latin1'); # $a is ISO 8859-1 code points and from Latin-1 code points to EBCDIC code points use Encode 'from_to'; my %ebcdic = ( 176 => 'cp37', 95 => 'cp1047', 106 => 'posix-bc' ); # $a is ISO 8859-1 code points from_to($a, 'latin1', $ebcdic{ord '^'}); # $a is in EBCDIC code points For doing I/O it is suggested that you use the autotranslating features of PerlIO, see L<perluniintro>. Since version 5.8 Perl uses the PerlIO I/O library. This enables you to use different encodings per IO channel. For example you may use use Encode; open($f, ">:encoding(ascii)", "test.ascii"); print $f "Hello World!\n"; open($f, ">:encoding(cp37)", "test.ebcdic"); print $f "Hello World!\n"; open($f, ">:encoding(latin1)", "test.latin1"); print $f "Hello World!\n"; open($f, ">:encoding(utf8)", "test.utf8"); print $f "Hello World!\n"; to get four files containing "Hello World!\n" in ASCII, CP 0037 EBCDIC, ISO 8859-1 (Latin-1) (in this example identical to ASCII since only ASCII characters were printed), and UTF-EBCDIC (in this example identical to normal EBCDIC since only characters that don't differ between EBCDIC and UTF-EBCDIC were printed). See the documentation of L<Encode::PerlIO> for details. As the PerlIO layer uses raw IO (bytes) internally, all this totally ignores things like the type of your filesystem (ASCII or EBCDIC). =head1 SINGLE OCTET TABLES The following tables list the ASCII and Latin 1 ordered sets including the subsets: C0 controls (0..31), ASCII graphics (32..7e), delete (7f), C1 controls (80..9f), and Latin-1 (a.k.a. ISO 8859-1) (a0..ff). In the table names of the Latin 1 extensions to ASCII have been labelled with character names roughly corresponding to I<The Unicode Standard, Version 6.1> albeit with substitutions such as C<s/LATIN//> and C<s/VULGAR//> in all cases; S<C<s/CAPITAL LETTER//>> in some cases; and S<C<s/SMALL LETTER ([A-Z])/\l$1/>> in some other cases. Controls are listed using their Unicode 6.2 abbreviations. The differences between the 0037 and 1047 sets are flagged with C<**>. The differences between the 1047 and POSIX-BC sets are flagged with C<##.> All C<ord()> numbers listed are decimal. If you would rather see this table listing octal values, then run the table (that is, the pod source text of this document, since this recipe may not work with a pod2_other_format translation) through: =over 4 =item recipe 0 =back perl -ne 'if(/(.{29})(\d+)\s+(\d+)\s+(\d+)\s+(\d+)/)' \ -e '{printf("%s%-5.03o%-5.03o%-5.03o%.03o\n",$1,$2,$3,$4,$5)}' \ perlebcdic.pod If you want to retain the UTF-x code points then in script form you might want to write: =over 4 =item recipe 1 =back open(FH,"<perlebcdic.pod") or die "Could not open perlebcdic.pod: $!"; while (<FH>) { if (/(.{29})(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\.?(\d*) \s+(\d+)\.?(\d*)/x) { if ($7 ne '' && $9 ne '') { printf( "%s%-5.03o%-5.03o%-5.03o%-5.03o%-3o.%-5o%-3o.%.03o\n", $1,$2,$3,$4,$5,$6,$7,$8,$9); } elsif ($7 ne '') { printf("%s%-5.03o%-5.03o%-5.03o%-5.03o%-3o.%-5o%.03o\n", $1,$2,$3,$4,$5,$6,$7,$8); } else { printf("%s%-5.03o%-5.03o%-5.03o%-5.03o%-5.03o%.03o\n", $1,$2,$3,$4,$5,$6,$8); } } } If you would rather see this table listing hexadecimal values then run the table through: =over 4 =item recipe 2 =back perl -ne 'if(/(.{29})(\d+)\s+(\d+)\s+(\d+)\s+(\d+)/)' \ -e '{printf("%s%-5.02X%-5.02X%-5.02X%.02X\n",$1,$2,$3,$4,$5)}' \ perlebcdic.pod Or, in order to retain the UTF-x code points in hexadecimal: =over 4 =item recipe 3 =back open(FH,"<perlebcdic.pod") or die "Could not open perlebcdic.pod: $!"; while (<FH>) { if (/(.{29})(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\.?(\d*) \s+(\d+)\.?(\d*)/x) { if ($7 ne '' && $9 ne '') { printf( "%s%-5.02X%-5.02X%-5.02X%-5.02X%-2X.%-6.02X%02X.%02X\n", $1,$2,$3,$4,$5,$6,$7,$8,$9); } elsif ($7 ne '') { printf("%s%-5.02X%-5.02X%-5.02X%-5.02X%-2X.%-6.02X%02X\n", $1,$2,$3,$4,$5,$6,$7,$8); } else { printf("%s%-5.02X%-5.02X%-5.02X%-5.02X%-5.02X%02X\n", $1,$2,$3,$4,$5,$6,$8); } } } ISO 8859-1 POS- CCSID CCSID CCSID CCSID IX- 1047 chr 0819 0037 1047 BC UTF-8 UTF-EBCDIC --------------------------------------------------------------------- <NUL> 0 0 0 0 0 0 <SOH> 1 1 1 1 1 1 <STX> 2 2 2 2 2 2 <ETX> 3 3 3 3 3 3 <EOT> 4 55 55 55 4 55 <ENQ> 5 45 45 45 5 45 <ACK> 6 46 46 46 6 46 <BEL> 7 47 47 47 7 47 <BS> 8 22 22 22 8 22 <HT> 9 5 5 5 9 5 <LF> 10 37 21 21 10 21 ** <VT> 11 11 11 11 11 11 <FF> 12 12 12 12 12 12 <CR> 13 13 13 13 13 13 <SO> 14 14 14 14 14 14 <SI> 15 15 15 15 15 15 <DLE> 16 16 16 16 16 16 <DC1> 17 17 17 17 17 17 <DC2> 18 18 18 18 18 18 <DC3> 19 19 19 19 19 19 <DC4> 20 60 60 60 20 60 <NAK> 21 61 61 61 21 61 <SYN> 22 50 50 50 22 50 <ETB> 23 38 38 38 23 38 <CAN> 24 24 24 24 24 24 <EOM> 25 25 25 25 25 25 <SUB> 26 63 63 63 26 63 <ESC> 27 39 39 39 27 39 <FS> 28 28 28 28 28 28 <GS> 29 29 29 29 29 29 <RS> 30 30 30 30 30 30 <US> 31 31 31 31 31 31 <SPACE> 32 64 64 64 32 64 ! 33 90 90 90 33 90 " 34 127 127 127 34 127 # 35 123 123 123 35 123 $ 36 91 91 91 36 91 % 37 108 108 108 37 108 & 38 80 80 80 38 80 ' 39 125 125 125 39 125 ( 40 77 77 77 40 77 ) 41 93 93 93 41 93 * 42 92 92 92 42 92 + 43 78 78 78 43 78 , 44 107 107 107 44 107 - 45 96 96 96 45 96 . 46 75 75 75 46 75 / 47 97 97 97 47 97 0 48 240 240 240 48 240 1 49 241 241 241 49 241 2 50 242 242 242 50 242 3 51 243 243 243 51 243 4 52 244 244 244 52 244 5 53 245 245 245 53 245 6 54 246 246 246 54 246 7 55 247 247 247 55 247 8 56 248 248 248 56 248 9 57 249 249 249 57 249 : 58 122 122 122 58 122 ; 59 94 94 94 59 94 < 60 76 76 76 60 76 = 61 126 126 126 61 126 > 62 110 110 110 62 110 ? 63 111 111 111 63 111 @ 64 124 124 124 64 124 A 65 193 193 193 65 193 B 66 194 194 194 66 194 C 67 195 195 195 67 195 D 68 196 196 196 68 196 E 69 197 197 197 69 197 F 70 198 198 198 70 198 G 71 199 199 199 71 199 H 72 200 200 200 72 200 I 73 201 201 201 73 201 J 74 209 209 209 74 209 K 75 210 210 210 75 210 L 76 211 211 211 76 211 M 77 212 212 212 77 212 N 78 213 213 213 78 213 O 79 214 214 214 79 214 P 80 215 215 215 80 215 Q 81 216 216 216 81 216 R 82 217 217 217 82 217 S 83 226 226 226 83 226 T 84 227 227 227 84 227 U 85 228 228 228 85 228 V 86 229 229 229 86 229 W 87 230 230 230 87 230 X 88 231 231 231 88 231 Y 89 232 232 232 89 232 Z 90 233 233 233 90 233 [ 91 186 173 187 91 173 ** ## \ 92 224 224 188 92 224 ## ] 93 187 189 189 93 189 ** ^ 94 176 95 106 94 95 ** ## _ 95 109 109 109 95 109 ` 96 121 121 74 96 121 ## a 97 129 129 129 97 129 b 98 130 130 130 98 130 c 99 131 131 131 99 131 d 100 132 132 132 100 132 e 101 133 133 133 101 133 f 102 134 134 134 102 134 g 103 135 135 135 103 135 h 104 136 136 136 104 136 i 105 137 137 137 105 137 j 106 145 145 145 106 145 k 107 146 146 146 107 146 l 108 147 147 147 108 147 m 109 148 148 148 109 148 n 110 149 149 149 110 149 o 111 150 150 150 111 150 p 112 151 151 151 112 151 q 113 152 152 152 113 152 r 114 153 153 153 114 153 s 115 162 162 162 115 162 t 116 163 163 163 116 163 u 117 164 164 164 117 164 v 118 165 165 165 118 165 w 119 166 166 166 119 166 x 120 167 167 167 120 167 y 121 168 168 168 121 168 z 122 169 169 169 122 169 { 123 192 192 251 123 192 ## | 124 79 79 79 124 79 } 125 208 208 253 125 208 ## ~ 126 161 161 255 126 161 ## <DEL> 127 7 7 7 127 7 <PAD> 128 32 32 32 194.128 32 <HOP> 129 33 33 33 194.129 33 <BPH> 130 34 34 34 194.130 34 <NBH> 131 35 35 35 194.131 35 <IND> 132 36 36 36 194.132 36 <NEL> 133 21 37 37 194.133 37 ** <SSA> 134 6 6 6 194.134 6 <ESA> 135 23 23 23 194.135 23 <HTS> 136 40 40 40 194.136 40 <HTJ> 137 41 41 41 194.137 41 <VTS> 138 42 42 42 194.138 42 <PLD> 139 43 43 43 194.139 43 <PLU> 140 44 44 44 194.140 44 <RI> 141 9 9 9 194.141 9 <SS2> 142 10 10 10 194.142 10 <SS3> 143 27 27 27 194.143 27 <DCS> 144 48 48 48 194.144 48 <PU1> 145 49 49 49 194.145 49 <PU2> 146 26 26 26 194.146 26 <STS> 147 51 51 51 194.147 51 <CCH> 148 52 52 52 194.148 52 <MW> 149 53 53 53 194.149 53 <SPA> 150 54 54 54 194.150 54 <EPA> 151 8 8 8 194.151 8 <SOS> 152 56 56 56 194.152 56 <SGC> 153 57 57 57 194.153 57 <SCI> 154 58 58 58 194.154 58 <CSI> 155 59 59 59 194.155 59 <ST> 156 4 4 4 194.156 4 <OSC> 157 20 20 20 194.157 20 <PM> 158 62 62 62 194.158 62 <APC> 159 255 255 95 194.159 255 ## <NON-BREAKING SPACE> 160 65 65 65 194.160 128.65 <INVERTED "!" > 161 170 170 170 194.161 128.66 <CENT SIGN> 162 74 74 176 194.162 128.67 ## <POUND SIGN> 163 177 177 177 194.163 128.68 <CURRENCY SIGN> 164 159 159 159 194.164 128.69 <YEN SIGN> 165 178 178 178 194.165 128.70 <BROKEN BAR> 166 106 106 208 194.166 128.71 ## <SECTION SIGN> 167 181 181 181 194.167 128.72 <DIAERESIS> 168 189 187 121 194.168 128.73 ** ## <COPYRIGHT SIGN> 169 180 180 180 194.169 128.74 <FEMININE ORDINAL> 170 154 154 154 194.170 128.81 <LEFT POINTING GUILLEMET> 171 138 138 138 194.171 128.82 <NOT SIGN> 172 95 176 186 194.172 128.83 ** ## <SOFT HYPHEN> 173 202 202 202 194.173 128.84 <REGISTERED TRADE MARK> 174 175 175 175 194.174 128.85 <MACRON> 175 188 188 161 194.175 128.86 ## <DEGREE SIGN> 176 144 144 144 194.176 128.87 <PLUS-OR-MINUS SIGN> 177 143 143 143 194.177 128.88 <SUPERSCRIPT TWO> 178 234 234 234 194.178 128.89 <SUPERSCRIPT THREE> 179 250 250 250 194.179 128.98 <ACUTE ACCENT> 180 190 190 190 194.180 128.99 <MICRO SIGN> 181 160 160 160 194.181 128.100 <PARAGRAPH SIGN> 182 182 182 182 194.182 128.101 <MIDDLE DOT> 183 179 179 179 194.183 128.102 <CEDILLA> 184 157 157 157 194.184 128.103 <SUPERSCRIPT ONE> 185 218 218 218 194.185 128.104 <MASC. ORDINAL INDICATOR> 186 155 155 155 194.186 128.105 <RIGHT POINTING GUILLEMET> 187 139 139 139 194.187 128.106 <FRACTION ONE QUARTER> 188 183 183 183 194.188 128.112 <FRACTION ONE HALF> 189 184 184 184 194.189 128.113 <FRACTION THREE QUARTERS> 190 185 185 185 194.190 128.114 <INVERTED QUESTION MARK> 191 171 171 171 194.191 128.115 <A WITH GRAVE> 192 100 100 100 195.128 138.65 <A WITH ACUTE> 193 101 101 101 195.129 138.66 <A WITH CIRCUMFLEX> 194 98 98 98 195.130 138.67 <A WITH TILDE> 195 102 102 102 195.131 138.68 <A WITH DIAERESIS> 196 99 99 99 195.132 138.69 <A WITH RING ABOVE> 197 103 103 103 195.133 138.70 <CAPITAL LIGATURE AE> 198 158 158 158 195.134 138.71 <C WITH CEDILLA> 199 104 104 104 195.135 138.72 <E WITH GRAVE> 200 116 116 116 195.136 138.73 <E WITH ACUTE> 201 113 113 113 195.137 138.74 <E WITH CIRCUMFLEX> 202 114 114 114 195.138 138.81 <E WITH DIAERESIS> 203 115 115 115 195.139 138.82 <I WITH GRAVE> 204 120 120 120 195.140 138.83 <I WITH ACUTE> 205 117 117 117 195.141 138.84 <I WITH CIRCUMFLEX> 206 118 118 118 195.142 138.85 <I WITH DIAERESIS> 207 119 119 119 195.143 138.86 <CAPITAL LETTER ETH> 208 172 172 172 195.144 138.87 <N WITH TILDE> 209 105 105 105 195.145 138.88 <O WITH GRAVE> 210 237 237 237 195.146 138.89 <O WITH ACUTE> 211 238 238 238 195.147 138.98 <O WITH CIRCUMFLEX> 212 235 235 235 195.148 138.99 <O WITH TILDE> 213 239 239 239 195.149 138.100 <O WITH DIAERESIS> 214 236 236 236 195.150 138.101 <MULTIPLICATION SIGN> 215 191 191 191 195.151 138.102 <O WITH STROKE> 216 128 128 128 195.152 138.103 <U WITH GRAVE> 217 253 253 224 195.153 138.104 ## <U WITH ACUTE> 218 254 254 254 195.154 138.105 <U WITH CIRCUMFLEX> 219 251 251 221 195.155 138.106 ## <U WITH DIAERESIS> 220 252 252 252 195.156 138.112 <Y WITH ACUTE> 221 173 186 173 195.157 138.113 ** ## <CAPITAL LETTER THORN> 222 174 174 174 195.158 138.114 <SMALL LETTER SHARP S> 223 89 89 89 195.159 138.115 <a WITH GRAVE> 224 68 68 68 195.160 139.65 <a WITH ACUTE> 225 69 69 69 195.161 139.66 <a WITH CIRCUMFLEX> 226 66 66 66 195.162 139.67 <a WITH TILDE> 227 70 70 70 195.163 139.68 <a WITH DIAERESIS> 228 67 67 67 195.164 139.69 <a WITH RING ABOVE> 229 71 71 71 195.165 139.70 <SMALL LIGATURE ae> 230 156 156 156 195.166 139.71 <c WITH CEDILLA> 231 72 72 72 195.167 139.72 <e WITH GRAVE> 232 84 84 84 195.168 139.73 <e WITH ACUTE> 233 81 81 81 195.169 139.74 <e WITH CIRCUMFLEX> 234 82 82 82 195.170 139.81 <e WITH DIAERESIS> 235 83 83 83 195.171 139.82 <i WITH GRAVE> 236 88 88 88 195.172 139.83 <i WITH ACUTE> 237 85 85 85 195.173 139.84 <i WITH CIRCUMFLEX> 238 86 86 86 195.174 139.85 <i WITH DIAERESIS> 239 87 87 87 195.175 139.86 <SMALL LETTER eth> 240 140 140 140 195.176 139.87 <n WITH TILDE> 241 73 73 73 195.177 139.88 <o WITH GRAVE> 242 205 205 205 195.178 139.89 <o WITH ACUTE> 243 206 206 206 195.179 139.98 <o WITH CIRCUMFLEX> 244 203 203 203 195.180 139.99 <o WITH TILDE> 245 207 207 207 195.181 139.100 <o WITH DIAERESIS> 246 204 204 204 195.182 139.101 <DIVISION SIGN> 247 225 225 225 195.183 139.102 <o WITH STROKE> 248 112 112 112 195.184 139.103 <u WITH GRAVE> 249 221 221 192 195.185 139.104 ## <u WITH ACUTE> 250 222 222 222 195.186 139.105 <u WITH CIRCUMFLEX> 251 219 219 219 195.187 139.106 <u WITH DIAERESIS> 252 220 220 220 195.188 139.112 <y WITH ACUTE> 253 141 141 141 195.189 139.113 <SMALL LETTER thorn> 254 142 142 142 195.190 139.114 <y WITH DIAERESIS> 255 223 223 223 195.191 139.115 If you would rather see the above table in CCSID 0037 order rather than ASCII + Latin-1 order then run the table through: =over 4 =item recipe 4 =back perl \ -ne 'if(/.{29}\d{1,3}\s{2,4}\d{1,3}\s{2,4}\d{1,3}\s{2,4}\d{1,3}/)'\ -e '{push(@l,$_)}' \ -e 'END{print map{$_->[0]}' \ -e ' sort{$a->[1] <=> $b->[1]}' \ -e ' map{[$_,substr($_,34,3)]}@l;}' perlebcdic.pod If you would rather see it in CCSID 1047 order then change the number 34 in the last line to 39, like this: =over 4 =item recipe 5 =back perl \ -ne 'if(/.{29}\d{1,3}\s{2,4}\d{1,3}\s{2,4}\d{1,3}\s{2,4}\d{1,3}/)'\ -e '{push(@l,$_)}' \ -e 'END{print map{$_->[0]}' \ -e ' sort{$a->[1] <=> $b->[1]}' \ -e ' map{[$_,substr($_,39,3)]}@l;}' perlebcdic.pod If you would rather see it in POSIX-BC order then change the number 34 in the last line to 44, like this: =over 4 =item recipe 6 =back perl \ -ne 'if(/.{29}\d{1,3}\s{2,4}\d{1,3}\s{2,4}\d{1,3}\s{2,4}\d{1,3}/)'\ -e '{push(@l,$_)}' \ -e 'END{print map{$_->[0]}' \ -e ' sort{$a->[1] <=> $b->[1]}' \ -e ' map{[$_,substr($_,44,3)]}@l;}' perlebcdic.pod =head2 Table in hex, sorted in 1047 order Since this document was first written, the convention has become more and more to use hexadecimal notation for code points. To do this with the recipes and to also sort is a multi-step process, so here, for convenience, is the table from above, re-sorted to be in Code Page 1047 order, and using hex notation. ISO 8859-1 POS- CCSID CCSID CCSID CCSID IX- 1047 chr 0819 0037 1047 BC UTF-8 UTF-EBCDIC --------------------------------------------------------------------- <NUL> 00 00 00 00 00 00 <SOH> 01 01 01 01 01 01 <STX> 02 02 02 02 02 02 <ETX> 03 03 03 03 03 03 <ST> 9C 04 04 04 C2.9C 04 <HT> 09 05 05 05 09 05 <SSA> 86 06 06 06 C2.86 06 <DEL> 7F 07 07 07 7F 07 <EPA> 97 08 08 08 C2.97 08 <RI> 8D 09 09 09 C2.8D 09 <SS2> 8E 0A 0A 0A C2.8E 0A <VT> 0B 0B 0B 0B 0B 0B <FF> 0C 0C 0C 0C 0C 0C <CR> 0D 0D 0D 0D 0D 0D <SO> 0E 0E 0E 0E 0E 0E <SI> 0F 0F 0F 0F 0F 0F <DLE> 10 10 10 10 10 10 <DC1> 11 11 11 11 11 11 <DC2> 12 12 12 12 12 12 <DC3> 13 13 13 13 13 13 <OSC> 9D 14 14 14 C2.9D 14 <LF> 0A 25 15 15 0A 15 ** <BS> 08 16 16 16 08 16 <ESA> 87 17 17 17 C2.87 17 <CAN> 18 18 18 18 18 18 <EOM> 19 19 19 19 19 19 <PU2> 92 1A 1A 1A C2.92 1A <SS3> 8F 1B 1B 1B C2.8F 1B <FS> 1C 1C 1C 1C 1C 1C <GS> 1D 1D 1D 1D 1D 1D <RS> 1E 1E 1E 1E 1E 1E <US> 1F 1F 1F 1F 1F 1F <PAD> 80 20 20 20 C2.80 20 <HOP> 81 21 21 21 C2.81 21 <BPH> 82 22 22 22 C2.82 22 <NBH> 83 23 23 23 C2.83 23 <IND> 84 24 24 24 C2.84 24 <NEL> 85 15 25 25 C2.85 25 ** <ETB> 17 26 26 26 17 26 <ESC> 1B 27 27 27 1B 27 <HTS> 88 28 28 28 C2.88 28 <HTJ> 89 29 29 29 C2.89 29 <VTS> 8A 2A 2A 2A C2.8A 2A <PLD> 8B 2B 2B 2B C2.8B 2B <PLU> 8C 2C 2C 2C C2.8C 2C <ENQ> 05 2D 2D 2D 05 2D <ACK> 06 2E 2E 2E 06 2E <BEL> 07 2F 2F 2F 07 2F <DCS> 90 30 30 30 C2.90 30 <PU1> 91 31 31 31 C2.91 31 <SYN> 16 32 32 32 16 32 <STS> 93 33 33 33 C2.93 33 <CCH> 94 34 34 34 C2.94 34 <MW> 95 35 35 35 C2.95 35 <SPA> 96 36 36 36 C2.96 36 <EOT> 04 37 37 37 04 37 <SOS> 98 38 38 38 C2.98 38 <SGC> 99 39 39 39 C2.99 39 <SCI> 9A 3A 3A 3A C2.9A 3A <CSI> 9B 3B 3B 3B C2.9B 3B <DC4> 14 3C 3C 3C 14 3C <NAK> 15 3D 3D 3D 15 3D <PM> 9E 3E 3E 3E C2.9E 3E <SUB> 1A 3F 3F 3F 1A 3F <SPACE> 20 40 40 40 20 40 <NON-BREAKING SPACE> A0 41 41 41 C2.A0 80.41 <a WITH CIRCUMFLEX> E2 42 42 42 C3.A2 8B.43 <a WITH DIAERESIS> E4 43 43 43 C3.A4 8B.45 <a WITH GRAVE> E0 44 44 44 C3.A0 8B.41 <a WITH ACUTE> E1 45 45 45 C3.A1 8B.42 <a WITH TILDE> E3 46 46 46 C3.A3 8B.44 <a WITH RING ABOVE> E5 47 47 47 C3.A5 8B.46 <c WITH CEDILLA> E7 48 48 48 C3.A7 8B.48 <n WITH TILDE> F1 49 49 49 C3.B1 8B.58 <CENT SIGN> A2 4A 4A B0 C2.A2 80.43 ## . 2E 4B 4B 4B 2E 4B < 3C 4C 4C 4C 3C 4C ( 28 4D 4D 4D 28 4D + 2B 4E 4E 4E 2B 4E | 7C 4F 4F 4F 7C 4F & 26 50 50 50 26 50 <e WITH ACUTE> E9 51 51 51 C3.A9 8B.4A <e WITH CIRCUMFLEX> EA 52 52 52 C3.AA 8B.51 <e WITH DIAERESIS> EB 53 53 53 C3.AB 8B.52 <e WITH GRAVE> E8 54 54 54 C3.A8 8B.49 <i WITH ACUTE> ED 55 55 55 C3.AD 8B.54 <i WITH CIRCUMFLEX> EE 56 56 56 C3.AE 8B.55 <i WITH DIAERESIS> EF 57 57 57 C3.AF 8B.56 <i WITH GRAVE> EC 58 58 58 C3.AC 8B.53 <SMALL LETTER SHARP S> DF 59 59 59 C3.9F 8A.73 ! 21 5A 5A 5A 21 5A $ 24 5B 5B 5B 24 5B * 2A 5C 5C 5C 2A 5C ) 29 5D 5D 5D 29 5D ; 3B 5E 5E 5E 3B 5E ^ 5E B0 5F 6A 5E 5F ** ## - 2D 60 60 60 2D 60 / 2F 61 61 61 2F 61 <A WITH CIRCUMFLEX> C2 62 62 62 C3.82 8A.43 <A WITH DIAERESIS> C4 63 63 63 C3.84 8A.45 <A WITH GRAVE> C0 64 64 64 C3.80 8A.41 <A WITH ACUTE> C1 65 65 65 C3.81 8A.42 <A WITH TILDE> C3 66 66 66 C3.83 8A.44 <A WITH RING ABOVE> C5 67 67 67 C3.85 8A.46 <C WITH CEDILLA> C7 68 68 68 C3.87 8A.48 <N WITH TILDE> D1 69 69 69 C3.91 8A.58 <BROKEN BAR> A6 6A 6A D0 C2.A6 80.47 ## , 2C 6B 6B 6B 2C 6B % 25 6C 6C 6C 25 6C _ 5F 6D 6D 6D 5F 6D > 3E 6E 6E 6E 3E 6E ? 3F 6F 6F 6F 3F 6F <o WITH STROKE> F8 70 70 70 C3.B8 8B.67 <E WITH ACUTE> C9 71 71 71 C3.89 8A.4A <E WITH CIRCUMFLEX> CA 72 72 72 C3.8A 8A.51 <E WITH DIAERESIS> CB 73 73 73 C3.8B 8A.52 <E WITH GRAVE> C8 74 74 74 C3.88 8A.49 <I WITH ACUTE> CD 75 75 75 C3.8D 8A.54 <I WITH CIRCUMFLEX> CE 76 76 76 C3.8E 8A.55 <I WITH DIAERESIS> CF 77 77 77 C3.8F 8A.56 <I WITH GRAVE> CC 78 78 78 C3.8C 8A.53 ` 60 79 79 4A 60 79 ## : 3A 7A 7A 7A 3A 7A # 23 7B 7B 7B 23 7B @ 40 7C 7C 7C 40 7C ' 27 7D 7D 7D 27 7D = 3D 7E 7E 7E 3D 7E " 22 7F 7F 7F 22 7F <O WITH STROKE> D8 80 80 80 C3.98 8A.67 a 61 81 81 81 61 81 b 62 82 82 82 62 82 c 63 83 83 83 63 83 d 64 84 84 84 64 84 e 65 85 85 85 65 85 f 66 86 86 86 66 86 g 67 87 87 87 67 87 h 68 88 88 88 68 88 i 69 89 89 89 69 89 <LEFT POINTING GUILLEMET> AB 8A 8A 8A C2.AB 80.52 <RIGHT POINTING GUILLEMET> BB 8B 8B 8B C2.BB 80.6A <SMALL LETTER eth> F0 8C 8C 8C C3.B0 8B.57 <y WITH ACUTE> FD 8D 8D 8D C3.BD 8B.71 <SMALL LETTER thorn> FE 8E 8E 8E C3.BE 8B.72 <PLUS-OR-MINUS SIGN> B1 8F 8F 8F C2.B1 80.58 <DEGREE SIGN> B0 90 90 90 C2.B0 80.57 j 6A 91 91 91 6A 91 k 6B 92 92 92 6B 92 l 6C 93 93 93 6C 93 m 6D 94 94 94 6D 94 n 6E 95 95 95 6E 95 o 6F 96 96 96 6F 96 p 70 97 97 97 70 97 q 71 98 98 98 71 98 r 72 99 99 99 72 99 <FEMININE ORDINAL> AA 9A 9A 9A C2.AA 80.51 <MASC. ORDINAL INDICATOR> BA 9B 9B 9B C2.BA 80.69 <SMALL LIGATURE ae> E6 9C 9C 9C C3.A6 8B.47 <CEDILLA> B8 9D 9D 9D C2.B8 80.67 <CAPITAL LIGATURE AE> C6 9E 9E 9E C3.86 8A.47 <CURRENCY SIGN> A4 9F 9F 9F C2.A4 80.45 <MICRO SIGN> B5 A0 A0 A0 C2.B5 80.64 ~ 7E A1 A1 FF 7E A1 ## s 73 A2 A2 A2 73 A2 t 74 A3 A3 A3 74 A3 u 75 A4 A4 A4 75 A4 v 76 A5 A5 A5 76 A5 w 77 A6 A6 A6 77 A6 x 78 A7 A7 A7 78 A7 y 79 A8 A8 A8 79 A8 z 7A A9 A9 A9 7A A9 <INVERTED "!" > A1 AA AA AA C2.A1 80.42 <INVERTED QUESTION MARK> BF AB AB AB C2.BF 80.73 <CAPITAL LETTER ETH> D0 AC AC AC C3.90 8A.57 [ 5B BA AD BB 5B AD ** ## <CAPITAL LETTER THORN> DE AE AE AE C3.9E 8A.72 <REGISTERED TRADE MARK> AE AF AF AF C2.AE 80.55 <NOT SIGN> AC 5F B0 BA C2.AC 80.53 ** ## <POUND SIGN> A3 B1 B1 B1 C2.A3 80.44 <YEN SIGN> A5 B2 B2 B2 C2.A5 80.46 <MIDDLE DOT> B7 B3 B3 B3 C2.B7 80.66 <COPYRIGHT SIGN> A9 B4 B4 B4 C2.A9 80.4A <SECTION SIGN> A7 B5 B5 B5 C2.A7 80.48 <PARAGRAPH SIGN> B6 B6 B6 B6 C2.B6 80.65 <FRACTION ONE QUARTER> BC B7 B7 B7 C2.BC 80.70 <FRACTION ONE HALF> BD B8 B8 B8 C2.BD 80.71 <FRACTION THREE QUARTERS> BE B9 B9 B9 C2.BE 80.72 <Y WITH ACUTE> DD AD BA AD C3.9D 8A.71 ** ## <DIAERESIS> A8 BD BB 79 C2.A8 80.49 ** ## <MACRON> AF BC BC A1 C2.AF 80.56 ## ] 5D BB BD BD 5D BD ** <ACUTE ACCENT> B4 BE BE BE C2.B4 80.63 <MULTIPLICATION SIGN> D7 BF BF BF C3.97 8A.66 { 7B C0 C0 FB 7B C0 ## A 41 C1 C1 C1 41 C1 B 42 C2 C2 C2 42 C2 C 43 C3 C3 C3 43 C3 D 44 C4 C4 C4 44 C4 E 45 C5 C5 C5 45 C5 F 46 C6 C6 C6 46 C6 G 47 C7 C7 C7 47 C7 H 48 C8 C8 C8 48 C8 I 49 C9 C9 C9 49 C9 <SOFT HYPHEN> AD CA CA CA C2.AD 80.54 <o WITH CIRCUMFLEX> F4 CB CB CB C3.B4 8B.63 <o WITH DIAERESIS> F6 CC CC CC C3.B6 8B.65 <o WITH GRAVE> F2 CD CD CD C3.B2 8B.59 <o WITH ACUTE> F3 CE CE CE C3.B3 8B.62 <o WITH TILDE> F5 CF CF CF C3.B5 8B.64 } 7D D0 D0 FD 7D D0 ## J 4A D1 D1 D1 4A D1 K 4B D2 D2 D2 4B D2 L 4C D3 D3 D3 4C D3 M 4D D4 D4 D4 4D D4 N 4E D5 D5 D5 4E D5 O 4F D6 D6 D6 4F D6 P 50 D7 D7 D7 50 D7 Q 51 D8 D8 D8 51 D8 R 52 D9 D9 D9 52 D9 <SUPERSCRIPT ONE> B9 DA DA DA C2.B9 80.68 <u WITH CIRCUMFLEX> FB DB DB DB C3.BB 8B.6A <u WITH DIAERESIS> FC DC DC DC C3.BC 8B.70 <u WITH GRAVE> F9 DD DD C0 C3.B9 8B.68 ## <u WITH ACUTE> FA DE DE DE C3.BA 8B.69 <y WITH DIAERESIS> FF DF DF DF C3.BF 8B.73 \ 5C E0 E0 BC 5C E0 ## <DIVISION SIGN> F7 E1 E1 E1 C3.B7 8B.66 S 53 E2 E2 E2 53 E2 T 54 E3 E3 E3 54 E3 U 55 E4 E4 E4 55 E4 V 56 E5 E5 E5 56 E5 W 57 E6 E6 E6 57 E6 X 58 E7 E7 E7 58 E7 Y 59 E8 E8 E8 59 E8 Z 5A E9 E9 E9 5A E9 <SUPERSCRIPT TWO> B2 EA EA EA C2.B2 80.59 <O WITH CIRCUMFLEX> D4 EB EB EB C3.94 8A.63 <O WITH DIAERESIS> D6 EC EC EC C3.96 8A.65 <O WITH GRAVE> D2 ED ED ED C3.92 8A.59 <O WITH ACUTE> D3 EE EE EE C3.93 8A.62 <O WITH TILDE> D5 EF EF EF C3.95 8A.64 0 30 F0 F0 F0 30 F0 1 31 F1 F1 F1 31 F1 2 32 F2 F2 F2 32 F2 3 33 F3 F3 F3 33 F3 4 34 F4 F4 F4 34 F4 5 35 F5 F5 F5 35 F5 6 36 F6 F6 F6 36 F6 7 37 F7 F7 F7 37 F7 8 38 F8 F8 F8 38 F8 9 39 F9 F9 F9 39 F9 <SUPERSCRIPT THREE> B3 FA FA FA C2.B3 80.62 <U WITH CIRCUMFLEX> DB FB FB DD C3.9B 8A.6A ## <U WITH DIAERESIS> DC FC FC FC C3.9C 8A.70 <U WITH GRAVE> D9 FD FD E0 C3.99 8A.68 ## <U WITH ACUTE> DA FE FE FE C3.9A 8A.69 <APC> 9F FF FF 5F C2.9F FF ## =head1 IDENTIFYING CHARACTER CODE SETS It is possible to determine which character set you are operating under. But first you need to be really really sure you need to do this. Your code will be simpler and probably just as portable if you don't have to test the character set and do different things, depending. There are actually only very few circumstances where it's not easy to write straight-line code portable to all character sets. See L<perluniintro/Unicode and EBCDIC> for how to portably specify characters. But there are some cases where you may want to know which character set you are running under. One possible example is doing L<sorting|/SORTING> in inner loops where performance is critical. To determine if you are running under ASCII or EBCDIC, you can use the return value of C<ord()> or C<chr()> to test one or more character values. For example: $is_ascii = "A" eq chr(65); $is_ebcdic = "A" eq chr(193); $is_ascii = ord("A") == 65; $is_ebcdic = ord("A") == 193; There's even less need to distinguish between EBCDIC code pages, but to do so try looking at one or more of the characters that differ between them. $is_ascii = ord('[') == 91; $is_ebcdic_37 = ord('[') == 186; $is_ebcdic_1047 = ord('[') == 173; $is_ebcdic_POSIX_BC = ord('[') == 187; However, it would be unwise to write tests such as: $is_ascii = "\r" ne chr(13); # WRONG $is_ascii = "\n" ne chr(10); # ILL ADVISED Obviously the first of these will fail to distinguish most ASCII platforms from either a CCSID 0037, a 1047, or a POSIX-BC EBCDIC platform since S<C<"\r" eq chr(13)>> under all of those coded character sets. But note too that because C<"\n"> is C<chr(13)> and C<"\r"> is C<chr(10)> on old Macintosh (which is an ASCII platform) the second C<$is_ascii> test will lead to trouble there. To determine whether or not perl was built under an EBCDIC code page you can use the Config module like so: use Config; $is_ebcdic = $Config{'ebcdic'} eq 'define'; =head1 CONVERSIONS =head2 C<utf8::unicode_to_native()> and C<utf8::native_to_unicode()> These functions take an input numeric code point in one encoding and return what its equivalent value is in the other. See L<utf8>. =head2 tr/// In order to convert a string of characters from one character set to another a simple list of numbers, such as in the right columns in the above table, along with Perl's C<tr///> operator is all that is needed. The data in the table are in ASCII/Latin1 order, hence the EBCDIC columns provide easy-to-use ASCII/Latin1 to EBCDIC operations that are also easily reversed. For example, to convert ASCII/Latin1 to code page 037 take the output of the second numbers column from the output of recipe 2 (modified to add C<"\"> characters), and use it in C<tr///> like so: $cp_037 = '\x00\x01\x02\x03\x37\x2D\x2E\x2F\x16\x05\x25\x0B\x0C\x0D\x0E\x0F' . '\x10\x11\x12\x13\x3C\x3D\x32\x26\x18\x19\x3F\x27\x1C\x1D\x1E\x1F' . '\x40\x5A\x7F\x7B\x5B\x6C\x50\x7D\x4D\x5D\x5C\x4E\x6B\x60\x4B\x61' . '\xF0\xF1\xF2\xF3\xF4\xF5\xF6\xF7\xF8\xF9\x7A\x5E\x4C\x7E\x6E\x6F' . '\x7C\xC1\xC2\xC3\xC4\xC5\xC6\xC7\xC8\xC9\xD1\xD2\xD3\xD4\xD5\xD6' . '\xD7\xD8\xD9\xE2\xE3\xE4\xE5\xE6\xE7\xE8\xE9\xBA\xE0\xBB\xB0\x6D' . '\x79\x81\x82\x83\x84\x85\x86\x87\x88\x89\x91\x92\x93\x94\x95\x96' . '\x97\x98\x99\xA2\xA3\xA4\xA5\xA6\xA7\xA8\xA9\xC0\x4F\xD0\xA1\x07' . '\x20\x21\x22\x23\x24\x15\x06\x17\x28\x29\x2A\x2B\x2C\x09\x0A\x1B' . '\x30\x31\x1A\x33\x34\x35\x36\x08\x38\x39\x3A\x3B\x04\x14\x3E\xFF' . '\x41\xAA\x4A\xB1\x9F\xB2\x6A\xB5\xBD\xB4\x9A\x8A\x5F\xCA\xAF\xBC' . '\x90\x8F\xEA\xFA\xBE\xA0\xB6\xB3\x9D\xDA\x9B\x8B\xB7\xB8\xB9\xAB' . '\x64\x65\x62\x66\x63\x67\x9E\x68\x74\x71\x72\x73\x78\x75\x76\x77' . '\xAC\x69\xED\xEE\xEB\xEF\xEC\xBF\x80\xFD\xFE\xFB\xFC\xAD\xAE\x59' . '\x44\x45\x42\x46\x43\x47\x9C\x48\x54\x51\x52\x53\x58\x55\x56\x57' . '\x8C\x49\xCD\xCE\xCB\xCF\xCC\xE1\x70\xDD\xDE\xDB\xDC\x8D\x8E\xDF'; my $ebcdic_string = $ascii_string; eval '$ebcdic_string =~ tr/\000-\377/' . $cp_037 . '/'; To convert from EBCDIC 037 to ASCII just reverse the order of the tr/// arguments like so: my $ascii_string = $ebcdic_string; eval '$ascii_string =~ tr/' . $cp_037 . '/\000-\377/'; Similarly one could take the output of the third numbers column from recipe 2 to obtain a C<$cp_1047> table. The fourth numbers column of the output from recipe 2 could provide a C<$cp_posix_bc> table suitable for transcoding as well. If you wanted to see the inverse tables, you would first have to sort on the desired numbers column as in recipes 4, 5 or 6, then take the output of the first numbers column. =head2 iconv XPG operability often implies the presence of an I<iconv> utility available from the shell or from the C library. Consult your system's documentation for information on iconv. On OS/390 or z/OS see the L<iconv(1)> manpage. One way to invoke the C<iconv> shell utility from within perl would be to: # OS/390 or z/OS example $ascii_data = `echo '$ebcdic_data'| iconv -f IBM-1047 -t ISO8859-1` or the inverse map: # OS/390 or z/OS example $ebcdic_data = `echo '$ascii_data'| iconv -f ISO8859-1 -t IBM-1047` For other Perl-based conversion options see the C<Convert::*> modules on CPAN. =head2 C RTL The OS/390 and z/OS C run-time libraries provide C<_atoe()> and C<_etoa()> functions. =head1 OPERATOR DIFFERENCES The C<..> range operator treats certain character ranges with care on EBCDIC platforms. For example the following array will have twenty six elements on either an EBCDIC platform or an ASCII platform: @alphabet = ('A'..'Z'); # $#alphabet == 25 The bitwise operators such as & ^ | may return different results when operating on string or character data in a Perl program running on an EBCDIC platform than when run on an ASCII platform. Here is an example adapted from the one in L<perlop>: # EBCDIC-based examples print "j p \n" ^ " a h"; # prints "JAPH\n" print "JA" | " ph\n"; # prints "japh\n" print "JAPH\nJunk" & "\277\277\277\277\277"; # prints "japh\n"; print 'p N$' ^ " E<H\n"; # prints "Perl\n"; An interesting property of the 32 C0 control characters in the ASCII table is that they can "literally" be constructed as control characters in Perl, e.g. C<(chr(0)> eq C<\c@>)> C<(chr(1)> eq C<\cA>)>, and so on. Perl on EBCDIC platforms has been ported to take C<\c@> to C<chr(0)> and C<\cA> to C<chr(1)>, etc. as well, but the characters that result depend on which code page you are using. The table below uses the standard acronyms for the controls. The POSIX-BC and 1047 sets are identical throughout this range and differ from the 0037 set at only one spot (21 decimal). Note that the line terminator character may be generated by C<\cJ> on ASCII platforms but by C<\cU> on 1047 or POSIX-BC platforms and cannot be generated as a C<"\c.letter."> control character on 0037 platforms. Note also that C<\c\> cannot be the final element in a string or regex, as it will absorb the terminator. But C<\c\I<X>> is a C<FILE SEPARATOR> concatenated with I<X> for all I<X>. The outlier C<\c?> on ASCII, which yields a non-C0 control C<DEL>, yields the outlier control C<APC> on EBCDIC, the one that isn't in the block of contiguous controls. Note that a subtlety of this is that C<\c?> on ASCII platforms is an ASCII character, while it isn't equivalent to any ASCII character in EBCDIC platforms. chr ord 8859-1 0037 1047 && POSIX-BC ----------------------------------------------------------------------- \c@ 0 <NUL> <NUL> <NUL> \cA 1 <SOH> <SOH> <SOH> \cB 2 <STX> <STX> <STX> \cC 3 <ETX> <ETX> <ETX> \cD 4 <EOT> <ST> <ST> \cE 5 <ENQ> <HT> <HT> \cF 6 <ACK> <SSA> <SSA> \cG 7 <BEL> <DEL> <DEL> \cH 8 <BS> <EPA> <EPA> \cI 9 <HT> <RI> <RI> \cJ 10 <LF> <SS2> <SS2> \cK 11 <VT> <VT> <VT> \cL 12 <FF> <FF> <FF> \cM 13 <CR> <CR> <CR> \cN 14 <SO> <SO> <SO> \cO 15 <SI> <SI> <SI> \cP 16 <DLE> <DLE> <DLE> \cQ 17 <DC1> <DC1> <DC1> \cR 18 <DC2> <DC2> <DC2> \cS 19 <DC3> <DC3> <DC3> \cT 20 <DC4> <OSC> <OSC> \cU 21 <NAK> <NEL> <LF> ** \cV 22 <SYN> <BS> <BS> \cW 23 <ETB> <ESA> <ESA> \cX 24 <CAN> <CAN> <CAN> \cY 25 <EOM> <EOM> <EOM> \cZ 26 <SUB> <PU2> <PU2> \c[ 27 <ESC> <SS3> <SS3> \c\X 28 <FS>X <FS>X <FS>X \c] 29 <GS> <GS> <GS> \c^ 30 <RS> <RS> <RS> \c_ 31 <US> <US> <US> \c? * <DEL> <APC> <APC> C<*> Note: C<\c?> maps to ordinal 127 (C<DEL>) on ASCII platforms, but since ordinal 127 is a not a control character on EBCDIC machines, C<\c?> instead maps on them to C<APC>, which is 255 in 0037 and 1047, and 95 in POSIX-BC. =head1 FUNCTION DIFFERENCES =over 8 =item C<chr()> C<chr()> must be given an EBCDIC code number argument to yield a desired character return value on an EBCDIC platform. For example: $CAPITAL_LETTER_A = chr(193); =item C<ord()> C<ord()> will return EBCDIC code number values on an EBCDIC platform. For example: $the_number_193 = ord("A"); =item C<pack()> The C<"c"> and C<"C"> templates for C<pack()> are dependent upon character set encoding. Examples of usage on EBCDIC include: $foo = pack("CCCC",193,194,195,196); # $foo eq "ABCD" $foo = pack("C4",193,194,195,196); # same thing $foo = pack("ccxxcc",193,194,195,196); # $foo eq "AB\0\0CD" The C<"U"> template has been ported to mean "Unicode" on all platforms so that pack("U", 65) eq 'A' is true on all platforms. If you want native code points for the low 256, use the C<"W"> template. This means that the equivalences pack("W", ord($character)) eq $character unpack("W", $character) == ord $character will hold. =item C<print()> One must be careful with scalars and strings that are passed to print that contain ASCII encodings. One common place for this to occur is in the output of the MIME type header for CGI script writing. For example, many Perl programming guides recommend something similar to: print "Content-type:\ttext/html\015\012\015\012"; # this may be wrong on EBCDIC You can instead write print "Content-type:\ttext/html\r\n\r\n"; # OK for DGW et al and have it work portably. That is because the translation from EBCDIC to ASCII is done by the web server in this case. Consult your web server's documentation for further details. =item C<printf()> The formats that can convert characters to numbers and vice versa will be different from their ASCII counterparts when executed on an EBCDIC platform. Examples include: printf("%c%c%c",193,194,195); # prints ABC =item C<sort()> EBCDIC sort results may differ from ASCII sort results especially for mixed case strings. This is discussed in more detail L<below|/SORTING>. =item C<sprintf()> See the discussion of C<L</printf()>> above. An example of the use of sprintf would be: $CAPITAL_LETTER_A = sprintf("%c",193); =item C<unpack()> See the discussion of C<L</pack()>> above. =back Note that it is possible to write portable code for these by specifying things in Unicode numbers, and using a conversion function: printf("%c",utf8::unicode_to_native(65)); # prints A on all # platforms print utf8::native_to_unicode(ord("A")); # Likewise, prints 65 See L<perluniintro/Unicode and EBCDIC> and L</CONVERSIONS> for other options. =head1 REGULAR EXPRESSION DIFFERENCES You can write your regular expressions just like someone on an ASCII platform would do. But keep in mind that using octal or hex notation to specify a particular code point will give you the character that the EBCDIC code page natively maps to it. (This is also true of all double-quoted strings.) If you want to write portably, just use the C<\N{U+...}> notation everywhere where you would have used C<\x{...}>, and don't use octal notation at all. Starting in Perl v5.22, this applies to ranges in bracketed character classes. If you say, for example, C<qr/[\N{U+20}-\N{U+7F}]/>, it means the characters C<\N{U+20}>, C<\N{U+21}>, ..., C<\N{U+7F}>. This range is all the printable characters that the ASCII character set contains. Prior to v5.22, you couldn't specify any ranges portably, except (starting in Perl v5.5.3) all subsets of the C<[A-Z]> and C<[a-z]> ranges are specially coded to not pick up gap characters. For example, characters such as "E<ocirc>" (C<o WITH CIRCUMFLEX>) that lie between "I" and "J" would not be matched by the regular expression range C</[H-K]/>. But if either of the range end points is explicitly numeric (and neither is specified by C<\N{U+...}>), the gap characters are matched: /[\x89-\x91]/ will match C<\x8e>, even though C<\x89> is "i" and C<\x91 > is "j", and C<\x8e> is a gap character, from the alphabetic viewpoint. Another construct to be wary of is the inappropriate use of hex (unless you use C<\N{U+...}>) or octal constants in regular expressions. Consider the following set of subs: sub is_c0 { my $char = substr(shift,0,1); $char =~ /[\000-\037]/; } sub is_print_ascii { my $char = substr(shift,0,1); $char =~ /[\040-\176]/; } sub is_delete { my $char = substr(shift,0,1); $char eq "\177"; } sub is_c1 { my $char = substr(shift,0,1); $char =~ /[\200-\237]/; } sub is_latin_1 { # But not ASCII; not C1 my $char = substr(shift,0,1); $char =~ /[\240-\377]/; } These are valid only on ASCII platforms. Starting in Perl v5.22, simply changing the octal constants to equivalent C<\N{U+...}> values makes them portable: sub is_c0 { my $char = substr(shift,0,1); $char =~ /[\N{U+00}-\N{U+1F}]/; } sub is_print_ascii { my $char = substr(shift,0,1); $char =~ /[\N{U+20}-\N{U+7E}]/; } sub is_delete { my $char = substr(shift,0,1); $char eq "\N{U+7F}"; } sub is_c1 { my $char = substr(shift,0,1); $char =~ /[\N{U+80}-\N{U+9F}]/; } sub is_latin_1 { # But not ASCII; not C1 my $char = substr(shift,0,1); $char =~ /[\N{U+A0}-\N{U+FF}]/; } And here are some alternative portable ways to write them: sub Is_c0 { my $char = substr(shift,0,1); return $char =~ /[[:cntrl:]]/a && ! Is_delete($char); # Alternatively: # return $char =~ /[[:cntrl:]]/ # && $char =~ /[[:ascii:]]/ # && ! Is_delete($char); } sub Is_print_ascii { my $char = substr(shift,0,1); return $char =~ /[[:print:]]/a; # Alternatively: # return $char =~ /[[:print:]]/ && $char =~ /[[:ascii:]]/; # Or # return $char # =~ /[ !"\#\$%&'()*+,\-.\/0-9:;<=>?\@A-Z[\\\]^_`a-z{|}~]/; } sub Is_delete { my $char = substr(shift,0,1); return utf8::native_to_unicode(ord $char) == 0x7F; } sub Is_c1 { use feature 'unicode_strings'; my $char = substr(shift,0,1); return $char =~ /[[:cntrl:]]/ && $char !~ /[[:ascii:]]/; } sub Is_latin_1 { # But not ASCII; not C1 use feature 'unicode_strings'; my $char = substr(shift,0,1); return ord($char) < 256 && $char !~ /[[:ascii:]]/ && $char !~ /[[:cntrl:]]/; } Another way to write C<Is_latin_1()> would be to use the characters in the range explicitly: sub Is_latin_1 { my $char = substr(shift,0,1); $char =~ /[ ¡¢£¤¥¦§¨©ª«¬®¯°±²³´µ¶·¸¹º»¼½¾¿ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏ] [ÐÑÒÓÔÕÖ×ØÙÚÛÜÝÞßàáâãäåæçèéêëìíîïðñòóôõö÷øùúûüýþÿ]/x; } Although that form may run into trouble in network transit (due to the presence of 8 bit characters) or on non ISO-Latin character sets. But it does allow C<Is_c1> to be rewritten so it works on Perls that don't have C<'unicode_strings'> (earlier than v5.14): sub Is_latin_1 { # But not ASCII; not C1 my $char = substr(shift,0,1); return ord($char) < 256 && $char !~ /[[:ascii:]]/ && ! Is_latin1($char); } =head1 SOCKETS Most socket programming assumes ASCII character encodings in network byte order. Exceptions can include CGI script writing under a host web server where the server may take care of translation for you. Most host web servers convert EBCDIC data to ISO-8859-1 or Unicode on output. =head1 SORTING One big difference between ASCII-based character sets and EBCDIC ones are the relative positions of the characters when sorted in native order. Of most concern are the upper- and lowercase letters, the digits, and the underscore (C<"_">). On ASCII platforms the native sort order has the digits come before the uppercase letters which come before the underscore which comes before the lowercase letters. On EBCDIC, the underscore comes first, then the lowercase letters, then the uppercase ones, and the digits last. If sorted on an ASCII-based platform, the two-letter abbreviation for a physician comes before the two letter abbreviation for drive; that is: @sorted = sort(qw(Dr. dr.)); # @sorted holds ('Dr.','dr.') on ASCII, # but ('dr.','Dr.') on EBCDIC The property of lowercase before uppercase letters in EBCDIC is even carried to the Latin 1 EBCDIC pages such as 0037 and 1047. An example would be that "E<Euml>" (C<E WITH DIAERESIS>, 203) comes before "E<euml>" (C<e WITH DIAERESIS>, 235) on an ASCII platform, but the latter (83) comes before the former (115) on an EBCDIC platform. (Astute readers will note that the uppercase version of "E<szlig>" C<SMALL LETTER SHARP S> is simply "SS" and that the upper case versions of "E<yuml>" (small C<y WITH DIAERESIS>) and "E<micro>" (C<MICRO SIGN>) are not in the 0..255 range but are in Unicode, in a Unicode enabled Perl). The sort order will cause differences between results obtained on ASCII platforms versus EBCDIC platforms. What follows are some suggestions on how to deal with these differences. =head2 Ignore ASCII vs. EBCDIC sort differences. This is the least computationally expensive strategy. It may require some user education. =head2 Use a sort helper function This is completely general, but the most computationally expensive strategy. Choose one or the other character set and transform to that for every sort comparison. Here's a complete example that transforms to ASCII sort order: sub native_to_uni($) { my $string = shift; # Saves time on an ASCII platform return $string if ord 'A' == 65; my $output = ""; for my $i (0 .. length($string) - 1) { $output .= chr(utf8::native_to_unicode(ord(substr($string, $i, 1)))); } # Preserve utf8ness of input onto the output, even if it didn't need # to be utf8 utf8::upgrade($output) if utf8::is_utf8($string); return $output; } sub ascii_order { # Sort helper return native_to_uni($a) cmp native_to_uni($b); } sort ascii_order @list; =head2 MONO CASE then sort data (for non-digits, non-underscore) If you don't care about where digits and underscore sort to, you can do something like this sub case_insensitive_order { # Sort helper return lc($a) cmp lc($b) } sort case_insensitive_order @list; If performance is an issue, and you don't care if the output is in the same case as the input, Use C<tr///> to transform to the case most employed within the data. If the data are primarily UPPERCASE non-Latin1, then apply C<tr/[a-z]/[A-Z]/>, and then C<sort()>. If the data are primarily lowercase non Latin1 then apply C<tr/[A-Z]/[a-z]/> before sorting. If the data are primarily UPPERCASE and include Latin-1 characters then apply: tr/[a-z]/[A-Z]/; tr/[àáâãäåæçèéêëìíîïðñòóôõöøùúûüýþ]/[ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝÞ/; s/ß/SS/g; then C<sort()>. If you have a choice, it's better to lowercase things to avoid the problems of the two Latin-1 characters whose uppercase is outside Latin-1: "E<yuml>" (small C<y WITH DIAERESIS>) and "E<micro>" (C<MICRO SIGN>). If you do need to upppercase, you can; with a Unicode-enabled Perl, do: tr/ÿ/\x{178}/; tr/µ/\x{39C}/; =head2 Perform sorting on one type of platform only. This strategy can employ a network connection. As such it would be computationally expensive. =head1 TRANSFORMATION FORMATS There are a variety of ways of transforming data with an intra character set mapping that serve a variety of purposes. Sorting was discussed in the previous section and a few of the other more popular mapping techniques are discussed next. =head2 URL decoding and encoding Note that some URLs have hexadecimal ASCII code points in them in an attempt to overcome character or protocol limitation issues. For example the tilde character is not on every keyboard hence a URL of the form: http://www.pvhp.com/~pvhp/ may also be expressed as either of: http://www.pvhp.com/%7Epvhp/ http://www.pvhp.com/%7epvhp/ where 7E is the hexadecimal ASCII code point for "~". Here is an example of decoding such a URL in any EBCDIC code page: $url = 'http://www.pvhp.com/%7Epvhp/'; $url =~ s/%([0-9a-fA-F]{2})/ pack("c",utf8::unicode_to_native(hex($1)))/xge; Conversely, here is a partial solution for the task of encoding such a URL in any EBCDIC code page: $url = 'http://www.pvhp.com/~pvhp/'; # The following regular expression does not address the # mappings for: ('.' => '%2E', '/' => '%2F', ':' => '%3A') $url =~ s/([\t "#%&\(\),;<=>\?\@\[\\\]^`{|}~])/ sprintf("%%%02X",utf8::native_to_unicode(ord($1)))/xge; where a more complete solution would split the URL into components and apply a full s/// substitution only to the appropriate parts. =head2 uu encoding and decoding The C<u> template to C<pack()> or C<unpack()> will render EBCDIC data in EBCDIC characters equivalent to their ASCII counterparts. For example, the following will print "Yes indeed\n" on either an ASCII or EBCDIC computer: $all_byte_chrs = ''; for (0..255) { $all_byte_chrs .= chr($_); } $uuencode_byte_chrs = pack('u', $all_byte_chrs); ($uu = <<'ENDOFHEREDOC') =~ s/^\s*//gm; M``$"`P0%!@<("0H+#`T.#Q`1$A,4%187&!D:&QP='A\@(2(C)"4F)R@I*BLL M+2XO,#$R,S0U-C<X.3H[/#T^/T!!0D-$149'2$E*2TQ-3D]045)35%565UA9 M6EM<75Y?8&%B8V1E9F=H:6IK;&UN;W!Q<G-T=79W>'EZ>WQ]?G^`@8*#A(6& MAXB)BHN,C8Z/D)&2DY25EI>8F9J;G)V>GZ"AHJ.DI::GJ*FJJZRMKJ^PL;*S MM+6VM[BYNKN\O;Z_P,'"P\3%QL?(R<K+S,W.S]#1TM/4U=;7V-G:V]S=WM_@ ?X>+CY.7FY^CIZNOL[>[O\/'R\_3U]O?X^?K[_/W^_P`` ENDOFHEREDOC if ($uuencode_byte_chrs eq $uu) { print "Yes "; } $uudecode_byte_chrs = unpack('u', $uuencode_byte_chrs); if ($uudecode_byte_chrs eq $all_byte_chrs) { print "indeed\n"; } Here is a very spartan uudecoder that will work on EBCDIC: #!/usr/local/bin/perl $_ = <> until ($mode,$file) = /^begin\s*(\d*)\s*(\S*)/; open(OUT, "> $file") if $file ne ""; while(<>) { last if /^end/; next if /[a-z]/; next unless int((((utf8::native_to_unicode(ord()) - 32 ) & 077) + 2) / 3) == int(length() / 4); print OUT unpack("u", $_); } close(OUT); chmod oct($mode), $file; =head2 Quoted-Printable encoding and decoding On ASCII-encoded platforms it is possible to strip characters outside of the printable set using: # This QP encoder works on ASCII only $qp_string =~ s/([=\x00-\x1F\x80-\xFF])/ sprintf("=%02X",ord($1))/xge; Starting in Perl v5.22, this is trivially changeable to work portably on both ASCII and EBCDIC platforms. # This QP encoder works on both ASCII and EBCDIC $qp_string =~ s/([=\N{U+00}-\N{U+1F}\N{U+80}-\N{U+FF}])/ sprintf("=%02X",ord($1))/xge; For earlier Perls, a QP encoder that works on both ASCII and EBCDIC platforms would look somewhat like the following: $delete = utf8::unicode_to_native(ord("\x7F")); $qp_string =~ s/([^[:print:]$delete])/ sprintf("=%02X",utf8::native_to_unicode(ord($1)))/xage; (although in production code the substitutions might be done in the EBCDIC branch with the function call and separately in the ASCII branch without the expense of the identity map; in Perl v5.22, the identity map is optimized out so there is no expense, but the alternative above is simpler and is also available in v5.22). Such QP strings can be decoded with: # This QP decoder is limited to ASCII only $string =~ s/=([[:xdigit:][[:xdigit:])/chr hex $1/ge; $string =~ s/=[\n\r]+$//; Whereas a QP decoder that works on both ASCII and EBCDIC platforms would look somewhat like the following: $string =~ s/=([[:xdigit:][:xdigit:]])/ chr utf8::native_to_unicode(hex $1)/xge; $string =~ s/=[\n\r]+$//; =head2 Caesarean ciphers The practice of shifting an alphabet one or more characters for encipherment dates back thousands of years and was explicitly detailed by Gaius Julius Caesar in his B<Gallic Wars> text. A single alphabet shift is sometimes referred to as a rotation and the shift amount is given as a number $n after the string 'rot' or "rot$n". Rot0 and rot26 would designate identity maps on the 26-letter English version of the Latin alphabet. Rot13 has the interesting property that alternate subsequent invocations are identity maps (thus rot13 is its own non-trivial inverse in the group of 26 alphabet rotations). Hence the following is a rot13 encoder and decoder that will work on ASCII and EBCDIC platforms: #!/usr/local/bin/perl while(<>){ tr/n-za-mN-ZA-M/a-zA-Z/; print; } In one-liner form: perl -ne 'tr/n-za-mN-ZA-M/a-zA-Z/;print' =head1 Hashing order and checksums Perl deliberately randomizes hash order for security purposes on both ASCII and EBCDIC platforms. EBCDIC checksums will differ for the same file translated into ASCII and vice versa. =head1 I18N AND L10N Internationalization (I18N) and localization (L10N) are supported at least in principle even on EBCDIC platforms. The details are system-dependent and discussed under the L</OS ISSUES> section below. =head1 MULTI-OCTET CHARACTER SETS Perl works with UTF-EBCDIC, a multi-byte encoding. In Perls earlier than v5.22, there may be various bugs in this regard. Legacy multi byte EBCDIC code pages XXX. =head1 OS ISSUES There may be a few system-dependent issues of concern to EBCDIC Perl programmers. =head2 OS/400 =over 8 =item PASE The PASE environment is a runtime environment for OS/400 that can run executables built for PowerPC AIX in OS/400; see L<perlos400>. PASE is ASCII-based, not EBCDIC-based as the ILE. =item IFS access XXX. =back =head2 OS/390, z/OS Perl runs under Unix Systems Services or USS. =over 8 =item C<sigaction> C<SA_SIGINFO> can have segmentation faults. =item C<chcp> B<chcp> is supported as a shell utility for displaying and changing one's code page. See also L<chcp(1)>. =item dataset access For sequential data set access try: my @ds_records = `cat //DSNAME`; or: my @ds_records = `cat //'HLQ.DSNAME'`; See also the OS390::Stdio module on CPAN. =item C<iconv> B<iconv> is supported as both a shell utility and a C RTL routine. See also the L<iconv(1)> and L<iconv(3)> manual pages. =item locales Locales are supported. There may be glitches when a locale is another EBCDIC code page which has some of the L<code-page variant characters|/The 13 variant characters> in other positions. There aren't currently any real UTF-8 locales, even though some locale names contain the string "UTF-8". See L<perllocale> for information on locales. The L10N files are in F</usr/nls/locale>. C<$Config{d_setlocale}> is C<'define'> on OS/390 or z/OS. =back =head2 POSIX-BC? XXX. =head1 BUGS =over 4 =item * Not all shells will allow multiple C<-e> string arguments to perl to be concatenated together properly as recipes in this document 0, 2, 4, 5, and 6 might seem to imply. =item * There are a significant number of test failures in the CPAN modules shipped with Perl v5.22 and 5.24. These are only in modules not primarily maintained by Perl 5 porters. Some of these are failures in the tests only: they don't realize that it is proper to get different results on EBCDIC platforms. And some of the failures are real bugs. If you compile and do a C<make test> on Perl, all tests on the C</cpan> directory are skipped. L<Encode> partially works. =item * In earlier Perl versions, when byte and character data were concatenated, the new string was sometimes created by decoding the byte strings as I<ISO 8859-1 (Latin-1)>, even if the old Unicode string used EBCDIC. =back =head1 SEE ALSO L<perllocale>, L<perlfunc>, L<perlunicode>, L<utf8>. =head1 REFERENCES L<http://anubis.dkuug.dk/i18n/charmaps> L<https://www.unicode.org/> L<https://www.unicode.org/unicode/reports/tr16/> L<http://www.wps.com/projects/codes/> B<ASCII: American Standard Code for Information Infiltration> Tom Jennings, September 1999. B<The Unicode Standard, Version 3.0> The Unicode Consortium, Lisa Moore ed., ISBN 0-201-61633-5, Addison Wesley Developers Press, February 2000. B<CDRA: IBM - Character Data Representation Architecture - Reference and Registry>, IBM SC09-2190-00, December 1996. "Demystifying Character Sets", Andrea Vine, Multilingual Computing & Technology, B<#26 Vol. 10 Issue 4>, August/September 1999; ISSN 1523-0309; Multilingual Computing Inc. Sandpoint ID, USA. B<Codes, Ciphers, and Other Cryptic and Clandestine Communication> Fred B. Wrixon, ISBN 1-57912-040-7, Black Dog & Leventhal Publishers, 1998. L<http://www.bobbemer.com/P-BIT.HTM> B<IBM - EBCDIC and the P-bit; The biggest Computer Goof Ever> Robert Bemer. =head1 HISTORY 15 April 2001: added UTF-8 and UTF-EBCDIC to main table, pvhp. =head1 AUTHOR Peter Prymmer pvhp@best.com wrote this in 1999 and 2000 with CCSID 0819 and 0037 help from Chris Leach and AndrE<eacute> Pirard A.Pirard@ulg.ac.be as well as POSIX-BC help from Thomas Dorner Thomas.Dorner@start.de. Thanks also to Vickie Cooper, Philip Newton, William Raffloer, and Joe Smith. Trademarks, registered trademarks, service marks and registered service marks used in this document are the property of their respective owners. Now maintained by Perl5 Porters. perlsolaris.pod 0000644 00000072223 15125556335 0007627 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specifically designed to be readable as is. =head1 NAME perlsolaris - Perl version 5 on Solaris systems =head1 DESCRIPTION This document describes various features of Sun's Solaris operating system that will affect how Perl version 5 (hereafter just perl) is compiled and/or runs. Some issues relating to the older SunOS 4.x are also discussed, though they may be out of date. For the most part, everything should just work. Starting with Solaris 8, perl5.00503 (or higher) is supplied with the operating system, so you might not even need to build a newer version of perl at all. The Sun-supplied version is installed in /usr/perl5 with F</usr/bin/perl> pointing to F</usr/perl5/bin/perl>. Do not disturb that installation unless you really know what you are doing. If you remove the perl supplied with the OS, you will render some bits of your system inoperable. If you wish to install a newer version of perl, install it under a different prefix from /usr/perl5. Common prefixes to use are /usr/local and /opt/perl. You may wish to put your version of perl in the PATH of all users by changing the link F</usr/bin/perl>. This is probably OK, as most perl scripts shipped with Solaris use an explicit path. (There are a few exceptions, such as F</usr/bin/rpm2cpio> and F</etc/rcm/scripts/README>, but these are also sufficiently generic that the actual version of perl probably doesn't matter too much.) Solaris ships with a range of Solaris-specific modules. If you choose to install your own version of perl you will find the source of many of these modules is available on CPAN under the Sun::Solaris:: namespace. Solaris may include two versions of perl, e.g. Solaris 9 includes both 5.005_03 and 5.6.1. This is to provide stability across Solaris releases, in cases where a later perl version has incompatibilities with the version included in the preceding Solaris release. The default perl version will always be the most recent, and in general the old version will only be retained for one Solaris release. Note also that the default perl will NOT be configured to search for modules in the older version, again due to compatibility/stability concerns. As a consequence if you upgrade Solaris, you will have to rebuild/reinstall any additional CPAN modules that you installed for the previous Solaris version. See the CPAN manpage under 'autobundle' for a quick way of doing this. As an interim measure, you may either change the #! line of your scripts to specifically refer to the old perl version, e.g. on Solaris 9 use #!/usr/perl5/5.00503/bin/perl to use the perl version that was the default for Solaris 8, or if you have a large number of scripts it may be more convenient to make the old version of perl the default on your system. You can do this by changing the appropriate symlinks under /usr/perl5 as follows (example for Solaris 9): # cd /usr/perl5 # rm bin man pod # ln -s ./5.00503/bin # ln -s ./5.00503/man # ln -s ./5.00503/lib/pod # rm /usr/bin/perl # ln -s ../perl5/5.00503/bin/perl /usr/bin/perl In both cases this should only be considered to be a temporary measure - you should upgrade to the later version of perl as soon as is practicable. Note also that the perl command-line utilities (e.g. perldoc) and any that are added by modules that you install will be under /usr/perl5/bin, so that directory should be added to your PATH. =head2 Solaris Version Numbers. For consistency with common usage, perl's Configure script performs some minor manipulations on the operating system name and version number as reported by uname. Here's a partial translation table: Sun: perl's Configure: uname uname -r Name osname osvers SunOS 4.1.3 Solaris 1.1 sunos 4.1.3 SunOS 5.6 Solaris 2.6 solaris 2.6 SunOS 5.8 Solaris 8 solaris 2.8 SunOS 5.9 Solaris 9 solaris 2.9 SunOS 5.10 Solaris 10 solaris 2.10 The complete table can be found in the Sun Managers' FAQ L<ftp://ftp.cs.toronto.edu/pub/jdd/sunmanagers/faq> under "9.1) Which Sun models run which versions of SunOS?". =head1 RESOURCES There are many, many sources for Solaris information. A few of the important ones for perl: =over 4 =item Solaris FAQ The Solaris FAQ is available at L<http://www.science.uva.nl/pub/solaris/solaris2.html>. The Sun Managers' FAQ is available at L<ftp://ftp.cs.toronto.edu/pub/jdd/sunmanagers/faq> =item Precompiled Binaries Precompiled binaries, links to many sites, and much, much more are available at L<http://www.sunfreeware.com/> and L<http://www.blastwave.org/>. =item Solaris Documentation All Solaris documentation is available on-line at L<http://docs.sun.com/>. =back =head1 SETTING UP =head2 File Extraction Problems on Solaris. Be sure to use a tar program compiled under Solaris (not SunOS 4.x) to extract the perl-5.x.x.tar.gz file. Do not use GNU tar compiled for SunOS4 on Solaris. (GNU tar compiled for Solaris should be fine.) When you run SunOS4 binaries on Solaris, the run-time system magically alters pathnames matching m#lib/locale# so that when tar tries to create lib/locale.pm, a file named lib/oldlocale.pm gets created instead. If you found this advice too late and used a SunOS4-compiled tar anyway, you must find the incorrectly renamed file and move it back to lib/locale.pm. =head2 Compiler and Related Tools on Solaris. You must use an ANSI C compiler to build perl. Perl can be compiled with either Sun's add-on C compiler or with gcc. The C compiler that shipped with SunOS4 will not do. =head3 Include /usr/ccs/bin/ in your PATH. Several tools needed to build perl are located in /usr/ccs/bin/: ar, as, ld, and make. Make sure that /usr/ccs/bin/ is in your PATH. On all the released versions of Solaris (8, 9 and 10) you need to make sure the following packages are installed (this info is extracted from the Solaris FAQ): for tools (sccs, lex, yacc, make, nm, truss, ld, as): SUNWbtool, SUNWsprot, SUNWtoo for libraries & headers: SUNWhea, SUNWarc, SUNWlibm, SUNWlibms, SUNWdfbh, SUNWcg6h, SUNWxwinc Additionally, on Solaris 8 and 9 you also need: for 64 bit development: SUNWarcx, SUNWbtoox, SUNWdplx, SUNWscpux, SUNWsprox, SUNWtoox, SUNWlmsx, SUNWlmx, SUNWlibCx And only on Solaris 8 you also need: for libraries & headers: SUNWolinc If you are in doubt which package contains a file you are missing, try to find an installation that has that file. Then do a $ grep /my/missing/file /var/sadm/install/contents This will display a line like this: /usr/include/sys/errno.h f none 0644 root bin 7471 37605 956241356 SUNWhea The last item listed (SUNWhea in this example) is the package you need. =head3 Avoid /usr/ucb/cc. You don't need to have /usr/ucb/ in your PATH to build perl. If you want /usr/ucb/ in your PATH anyway, make sure that /usr/ucb/ is NOT in your PATH before the directory containing the right C compiler. =head3 Sun's C Compiler If you use Sun's C compiler, make sure the correct directory (usually /opt/SUNWspro/bin/) is in your PATH (before /usr/ucb/). =head3 GCC If you use gcc, make sure your installation is recent and complete. perl versions since 5.6.0 build fine with gcc > 2.8.1 on Solaris >= 2.6. You must Configure perl with $ sh Configure -Dcc=gcc If you don't, you may experience strange build errors. If you have updated your Solaris version, you may also have to update your gcc. For example, if you are running Solaris 2.6 and your gcc is installed under /usr/local, check in /usr/local/lib/gcc-lib and make sure you have the appropriate directory, sparc-sun-solaris2.6/ or i386-pc-solaris2.6/. If gcc's directory is for a different version of Solaris than you are running, then you will need to rebuild gcc for your new version of Solaris. You can get a precompiled version of gcc from L<http://www.sunfreeware.com/> or L<http://www.blastwave.org/>. Make sure you pick up the package for your Solaris release. If you wish to use gcc to build add-on modules for use with the perl shipped with Solaris, you should use the Solaris::PerlGcc module which is available from CPAN. The perl shipped with Solaris is configured and built with the Sun compilers, and the compiler configuration information stored in Config.pm is therefore only relevant to the Sun compilers. The Solaris:PerlGcc module contains a replacement Config.pm that is correct for gcc - see the module for details. =head3 GNU as and GNU ld The following information applies to gcc version 2. Volunteers to update it as appropriately for gcc version 3 would be appreciated. The versions of as and ld supplied with Solaris work fine for building perl. There is normally no need to install the GNU versions to compile perl. If you decide to ignore this advice and use the GNU versions anyway, then be sure that they are relatively recent. Versions newer than 2.7 are apparently new enough. Older versions may have trouble with dynamic loading. If you wish to use GNU ld, then you need to pass it the -Wl,-E flag. The hints/solaris_2.sh file tries to do this automatically by setting the following Configure variables: ccdlflags="$ccdlflags -Wl,-E" lddlflags="$lddlflags -Wl,-E -G" However, over the years, changes in gcc, GNU ld, and Solaris ld have made it difficult to automatically detect which ld ultimately gets called. You may have to manually edit config.sh and add the -Wl,-E flags yourself, or else run Configure interactively and add the flags at the appropriate prompts. If your gcc is configured to use GNU as and ld but you want to use the Solaris ones instead to build perl, then you'll need to add -B/usr/ccs/bin/ to the gcc command line. One convenient way to do that is with $ sh Configure -Dcc='gcc -B/usr/ccs/bin/' Note that the trailing slash is required. This will result in some harmless warnings as Configure is run: gcc: file path prefix `/usr/ccs/bin/' never used These messages may safely be ignored. (Note that for a SunOS4 system, you must use -B/bin/ instead.) Alternatively, you can use the GCC_EXEC_PREFIX environment variable to ensure that Sun's as and ld are used. Consult your gcc documentation for further information on the -B option and the GCC_EXEC_PREFIX variable. =head3 Sun and GNU make The make under /usr/ccs/bin works fine for building perl. If you have the Sun C compilers, you will also have a parallel version of make (dmake). This works fine to build perl, but can sometimes cause problems when running 'make test' due to underspecified dependencies between the different test harness files. The same problem can also affect the building of some add-on modules, so in those cases either specify '-m serial' on the dmake command line, or use /usr/ccs/bin/make instead. If you wish to use GNU make, be sure that the set-group-id bit is not set. If it is, then arrange your PATH so that /usr/ccs/bin/make is before GNU make or else have the system administrator disable the set-group-id bit on GNU make. =head3 Avoid libucb. Solaris provides some BSD-compatibility functions in /usr/ucblib/libucb.a. Perl will not build and run correctly if linked against -lucb since it contains routines that are incompatible with the standard Solaris libc. Normally this is not a problem since the solaris hints file prevents Configure from even looking in /usr/ucblib for libraries, and also explicitly omits -lucb. =head2 Environment for Compiling perl on Solaris =head3 PATH Make sure your PATH includes the compiler (/opt/SUNWspro/bin/ if you're using Sun's compiler) as well as /usr/ccs/bin/ to pick up the other development tools (such as make, ar, as, and ld). Make sure your path either doesn't include /usr/ucb or that it includes it after the compiler and compiler tools and other standard Solaris directories. You definitely don't want /usr/ucb/cc. =head3 LD_LIBRARY_PATH If you have the LD_LIBRARY_PATH environment variable set, be sure that it does NOT include /lib or /usr/lib. If you will be building extensions that call third-party shared libraries (e.g. Berkeley DB) then make sure that your LD_LIBRARY_PATH environment variable includes the directory with that library (e.g. /usr/local/lib). If you get an error message dlopen: stub interception failed it is probably because your LD_LIBRARY_PATH environment variable includes a directory which is a symlink to /usr/lib (such as /lib). The reason this causes a problem is quite subtle. The file libdl.so.1.0 actually *only* contains functions which generate 'stub interception failed' errors! The runtime linker intercepts links to "/usr/lib/libdl.so.1.0" and links in internal implementations of those functions instead. [Thanks to Tim Bunce for this explanation.] =head1 RUN CONFIGURE. See the INSTALL file for general information regarding Configure. Only Solaris-specific issues are discussed here. Usually, the defaults should be fine. =head2 64-bit perl on Solaris. See the INSTALL file for general information regarding 64-bit compiles. In general, the defaults should be fine for most people. By default, perl-5.6.0 (or later) is compiled as a 32-bit application with largefile and long-long support. =head3 General 32-bit vs. 64-bit issues. Solaris 7 and above will run in either 32 bit or 64 bit mode on SPARC CPUs, via a reboot. You can build 64 bit apps whilst running 32 bit mode and vice-versa. 32 bit apps will run under Solaris running in either 32 or 64 bit mode. 64 bit apps require Solaris to be running 64 bit mode. Existing 32 bit apps are properly known as LP32, i.e. Longs and Pointers are 32 bit. 64-bit apps are more properly known as LP64. The discriminating feature of a LP64 bit app is its ability to utilise a 64-bit address space. It is perfectly possible to have a LP32 bit app that supports both 64-bit integers (long long) and largefiles (> 2GB), and this is the default for perl-5.6.0. For a more complete explanation of 64-bit issues, see the "Solaris 64-bit Developer's Guide" at L<http://docs.sun.com/> You can detect the OS mode using "isainfo -v", e.g. $ isainfo -v # Ultra 30 in 64 bit mode 64-bit sparcv9 applications 32-bit sparc applications By default, perl will be compiled as a 32-bit application. Unless you want to allocate more than ~ 4GB of memory inside perl, or unless you need more than 255 open file descriptors, you probably don't need perl to be a 64-bit app. =head3 Large File Support For Solaris 2.6 and onwards, there are two different ways for 32-bit applications to manipulate large files (files whose size is > 2GByte). (A 64-bit application automatically has largefile support built in by default.) First is the "transitional compilation environment", described in lfcompile64(5). According to the man page, The transitional compilation environment exports all the explicit 64-bit functions (xxx64()) and types in addition to all the regular functions (xxx()) and types. Both xxx() and xxx64() functions are available to the program source. A 32-bit application must use the xxx64() functions in order to access large files. See the lf64(5) manual page for a complete listing of the 64-bit transitional interfaces. The transitional compilation environment is obtained with the following compiler and linker flags: getconf LFS64_CFLAGS -D_LARGEFILE64_SOURCE getconf LFS64_LDFLAG # nothing special needed getconf LFS64_LIBS # nothing special needed Second is the "large file compilation environment", described in lfcompile(5). According to the man page, Each interface named xxx() that needs to access 64-bit entities to access large files maps to a xxx64() call in the resulting binary. All relevant data types are defined to be of correct size (for example, off_t has a typedef definition for a 64-bit entity). An application compiled in this environment is able to use the xxx() source interfaces to access both large and small files, rather than having to explicitly utilize the transitional xxx64() interface calls to access large files. Two exceptions are fseek() and ftell(). 32-bit applications should use fseeko(3C) and ftello(3C). These will get automatically mapped to fseeko64() and ftello64(). The large file compilation environment is obtained with getconf LFS_CFLAGS -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 getconf LFS_LDFLAGS # nothing special needed getconf LFS_LIBS # nothing special needed By default, perl uses the large file compilation environment and relies on Solaris to do the underlying mapping of interfaces. =head3 Building an LP64 perl To compile a 64-bit application on an UltraSparc with a recent Sun Compiler, you need to use the flag "-xarch=v9". getconf(1) will tell you this, e.g. $ getconf -a | grep v9 XBS5_LP64_OFF64_CFLAGS: -xarch=v9 XBS5_LP64_OFF64_LDFLAGS: -xarch=v9 XBS5_LP64_OFF64_LINTFLAGS: -xarch=v9 XBS5_LPBIG_OFFBIG_CFLAGS: -xarch=v9 XBS5_LPBIG_OFFBIG_LDFLAGS: -xarch=v9 XBS5_LPBIG_OFFBIG_LINTFLAGS: -xarch=v9 _XBS5_LP64_OFF64_CFLAGS: -xarch=v9 _XBS5_LP64_OFF64_LDFLAGS: -xarch=v9 _XBS5_LP64_OFF64_LINTFLAGS: -xarch=v9 _XBS5_LPBIG_OFFBIG_CFLAGS: -xarch=v9 _XBS5_LPBIG_OFFBIG_LDFLAGS: -xarch=v9 _XBS5_LPBIG_OFFBIG_LINTFLAGS: -xarch=v9 This flag is supported in Sun WorkShop Compilers 5.0 and onwards (now marketed under the name Forte) when used on Solaris 7 or later on UltraSparc systems. If you are using gcc, you would need to use -mcpu=v9 -m64 instead. This option is not yet supported as of gcc 2.95.2; from install/SPECIFIC in that release: GCC version 2.95 is not able to compile code correctly for sparc64 targets. Users of the Linux kernel, at least, can use the sparc32 program to start up a new shell invocation with an environment that causes configure to recognize (via uname -a) the system as sparc-*-* instead. All this should be handled automatically by the hints file, if requested. =head3 Long Doubles. As of 5.8.1, long doubles are working if you use the Sun compilers (needed for additional math routines not included in libm). =head2 Threads in perl on Solaris. It is possible to build a threaded version of perl on Solaris. The entire perl thread implementation is still experimental, however, so beware. =head2 Malloc Issues with perl on Solaris. Starting from perl 5.7.1 perl uses the Solaris malloc, since the perl malloc breaks when dealing with more than 2GB of memory, and the Solaris malloc also seems to be faster. If you for some reason (such as binary backward compatibility) really need to use perl's malloc, you can rebuild perl from the sources and Configure the build with $ sh Configure -Dusemymalloc You should not use perl's malloc if you are building with gcc. There are reports of core dumps, especially in the PDL module. The problem appears to go away under -DDEBUGGING, so it has been difficult to track down. Sun's compiler appears to be okay with or without perl's malloc. [XXX further investigation is needed here.] =head1 MAKE PROBLEMS. =over 4 =item Dynamic Loading Problems With GNU as and GNU ld If you have problems with dynamic loading using gcc on SunOS or Solaris, and you are using GNU as and GNU ld, see the section L</"GNU as and GNU ld"> above. =item ld.so.1: ./perl: fatal: relocation error: If you get this message on SunOS or Solaris, and you're using gcc, it's probably the GNU as or GNU ld problem in the previous item L</"GNU as and GNU ld">. =item dlopen: stub interception failed The primary cause of the 'dlopen: stub interception failed' message is that the LD_LIBRARY_PATH environment variable includes a directory which is a symlink to /usr/lib (such as /lib). See L</"LD_LIBRARY_PATH"> above. =item #error "No DATAMODEL_NATIVE specified" This is a common error when trying to build perl on Solaris 2.6 with a gcc installation from Solaris 2.5 or 2.5.1. The Solaris header files changed, so you need to update your gcc installation. You can either rerun the fixincludes script from gcc or take the opportunity to update your gcc installation. =item sh: ar: not found This is a message from your shell telling you that the command 'ar' was not found. You need to check your PATH environment variable to make sure that it includes the directory with the 'ar' command. This is a common problem on Solaris, where 'ar' is in the /usr/ccs/bin/ directory. =back =head1 MAKE TEST =head2 op/stat.t test 4 in Solaris F<op/stat.t> test 4 may fail if you are on a tmpfs of some sort. Building in /tmp sometimes shows this behavior. The test suite detects if you are building in /tmp, but it may not be able to catch all tmpfs situations. =head2 nss_delete core dump from op/pwent or op/grent See L<perlhpux/"nss_delete core dump from op/pwent or op/grent">. =head1 CROSS-COMPILATION Nothing too unusual here. You can easily do this if you have a cross-compiler available; A usual Configure invocation when targetting a Solaris x86 looks something like this: sh ./Configure -des -Dusecrosscompile \ -Dcc=i386-pc-solaris2.11-gcc \ -Dsysroot=$SYSROOT \ -Alddlflags=" -Wl,-z,notext" \ -Dtargethost=... # The usual cross-compilation options The lddlflags addition is the only abnormal bit. =head1 PREBUILT BINARIES OF PERL FOR SOLARIS. You can pick up prebuilt binaries for Solaris from L<http://www.sunfreeware.com/>, L<http://www.blastwave.org>, ActiveState L<http://www.activestate.com/>, and L<http://www.perl.com/> under the Binaries list at the top of the page. There are probably other sources as well. Please note that these sites are under the control of their respective owners, not the perl developers. =head1 RUNTIME ISSUES FOR PERL ON SOLARIS. =head2 Limits on Numbers of Open Files on Solaris. The stdio(3C) manpage notes that for LP32 applications, only 255 files may be opened using fopen(), and only file descriptors 0 through 255 can be used in a stream. Since perl calls open() and then fdopen(3C) with the resulting file descriptor, perl is limited to 255 simultaneous open files, even if sysopen() is used. If this proves to be an insurmountable problem, you can compile perl as a LP64 application, see L</Building an LP64 perl> for details. Note also that the default resource limit for open file descriptors on Solaris is 255, so you will have to modify your ulimit or rctl (Solaris 9 onwards) appropriately. =head1 SOLARIS-SPECIFIC MODULES. See the modules under the Solaris:: and Sun::Solaris namespaces on CPAN, see L<http://www.cpan.org/modules/by-module/Solaris/> and L<http://www.cpan.org/modules/by-module/Sun/>. =head1 SOLARIS-SPECIFIC PROBLEMS WITH MODULES. =head2 Proc::ProcessTable on Solaris Proc::ProcessTable does not compile on Solaris with perl5.6.0 and higher if you have LARGEFILES defined. Since largefile support is the default in 5.6.0 and later, you have to take special steps to use this module. The problem is that various structures visible via procfs use off_t, and if you compile with largefile support these change from 32 bits to 64 bits. Thus what you get back from procfs doesn't match up with the structures in perl, resulting in garbage. See proc(4) for further discussion. A fix for Proc::ProcessTable is to edit Makefile to explicitly remove the largefile flags from the ones MakeMaker picks up from Config.pm. This will result in Proc::ProcessTable being built under the correct environment. Everything should then be OK as long as Proc::ProcessTable doesn't try to share off_t's with the rest of perl, or if it does they should be explicitly specified as off64_t. =head2 BSD::Resource on Solaris BSD::Resource versions earlier than 1.09 do not compile on Solaris with perl 5.6.0 and higher, for the same reasons as Proc::ProcessTable. BSD::Resource versions starting from 1.09 have a workaround for the problem. =head2 Net::SSLeay on Solaris Net::SSLeay requires a /dev/urandom to be present. This device is available from Solaris 9 onwards. For earlier Solaris versions you can either get the package SUNWski (packaged with several Sun software products, for example the Sun WebServer, which is part of the Solaris Server Intranet Extension, or the Sun Directory Services, part of Solaris for ISPs) or download the ANDIrand package from L<http://www.cosy.sbg.ac.at/~andi/>. If you use SUNWski, make a symbolic link /dev/urandom pointing to /dev/random. For more details, see Document ID27606 entitled "Differing /dev/random support requirements within Solaris[TM] Operating Environments", available at L<http://sunsolve.sun.com> . It may be possible to use the Entropy Gathering Daemon (written in Perl!), available from L<http://www.lothar.com/tech/crypto/>. =head1 SunOS 4.x In SunOS 4.x you most probably want to use the SunOS ld, /usr/bin/ld, since the more recent versions of GNU ld (like 2.13) do not seem to work for building Perl anymore. When linking the extensions, the GNU ld gets very unhappy and spews a lot of errors like this ... relocation truncated to fit: BASE13 ... and dies. Therefore the SunOS 4.1 hints file explicitly sets the ld to be F</usr/bin/ld>. As of Perl 5.8.1 the dynamic loading of libraries (DynaLoader, XSLoader) also seems to have become broken in in SunOS 4.x. Therefore the default is to build Perl statically. Running the test suite in SunOS 4.1 is a bit tricky since the F<dist/Tie-File/t/09_gen_rs.t> test hangs (subtest #51, FWIW) for some unknown reason. Just stop the test and kill that particular Perl process. There are various other failures, that as of SunOS 4.1.4 and gcc 3.2.2 look a lot like gcc bugs. Many of the failures happen in the Encode tests, where for example when the test expects "0" you get "0" which should after a little squinting look very odd indeed. Another example is earlier in F<t/run/fresh_perl> where chr(0xff) is expected but the test fails because the result is chr(0xff). Exactly. This is the "make test" result from the said combination: Failed 27 test scripts out of 745, 96.38% okay. Running the C<harness> is painful because of the many failing Unicode-related tests will output megabytes of failure messages, but if one patiently waits, one gets these results: Failed Test Stat Wstat Total Fail Failed List of Failed ----------------------------------------------------------------------------- ... ../ext/Encode/t/at-cn.t 4 1024 29 4 13.79% 14-17 ../ext/Encode/t/at-tw.t 10 2560 17 10 58.82% 2 4 6 8 10 12 14-17 ../ext/Encode/t/enc_data.t 29 7424 ?? ?? % ?? ../ext/Encode/t/enc_eucjp.t 29 7424 ?? ?? % ?? ../ext/Encode/t/enc_module.t 29 7424 ?? ?? % ?? ../ext/Encode/t/encoding.t 29 7424 ?? ?? % ?? ../ext/Encode/t/grow.t 12 3072 24 12 50.00% 2 4 6 8 10 12 14 16 18 20 22 24 Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------ ../ext/Encode/t/guess.t 255 65280 29 40 137.93% 10-29 ../ext/Encode/t/jperl.t 29 7424 15 30 200.00% 1-15 ../ext/Encode/t/mime-header.t 2 512 10 2 20.00% 2-3 ../ext/Encode/t/perlio.t 22 5632 38 22 57.89% 1-4 9-16 19-20 23-24 27-32 ../ext/List/Util/t/shuffle.t 0 139 ?? ?? % ?? ../ext/PerlIO/t/encoding.t 14 1 7.14% 11 ../ext/PerlIO/t/fallback.t 9 2 22.22% 3 5 ../ext/Socket/t/socketpair.t 0 2 45 70 155.56% 11-45 ../lib/CPAN/t/vcmp.t 30 1 3.33% 25 ../lib/Tie/File/t/09_gen_rs.t 0 15 ?? ?? % ?? ../lib/Unicode/Collate/t/test.t 199 30 15.08% 7 26-27 71-75 81-88 95 101 103-104 106 108- 109 122 124 161 169-172 ../lib/sort.t 0 139 119 26 21.85% 107-119 op/alarm.t 4 1 25.00% 4 op/utfhash.t 97 1 1.03% 31 run/fresh_perl.t 91 1 1.10% 32 uni/tr_7jis.t ?? ?? % ?? uni/tr_eucjp.t 29 7424 6 12 200.00% 1-6 uni/tr_sjis.t 29 7424 6 12 200.00% 1-6 56 tests and 467 subtests skipped. Failed 27/811 test scripts, 96.67% okay. 1383/75399 subtests failed, 98.17% okay. The alarm() test failure is caused by system() apparently blocking alarm(). That is probably a libc bug, and given that SunOS 4.x has been end-of-lifed years ago, don't hold your breath for a fix. In addition to that, don't try anything too Unicode-y, especially with Encode, and you should be fine in SunOS 4.x. =head1 AUTHOR The original was written by Andy Dougherty F<doughera@lafayette.edu> drawing heavily on advice from Alan Burlison, Nick Ing-Simmons, Tim Bunce, and many other Solaris users over the years. Please report any errors, updates, or suggestions to L<https://github.com/Perl/perl5/issues>. perl586delta.pod 0000644 00000011053 15125556335 0007501 0 ustar 00 =head1 NAME perl586delta - what is new for perl v5.8.6 =head1 DESCRIPTION This document describes differences between the 5.8.5 release and the 5.8.6 release. =head1 Incompatible Changes There are no changes incompatible with 5.8.5. =head1 Core Enhancements The perl interpreter is now more tolerant of UTF-16-encoded scripts. On Win32, Perl can now use non-IFS compatible LSPs, which allows Perl to work in conjunction with firewalls such as McAfee Guardian. For full details see the file F<README.win32>, particularly if you're running Win95. =head1 Modules and Pragmata =over 4 =item * With the C<base> pragma, an intermediate class with no fields used to messes up private fields in the base class. This has been fixed. =item * Cwd upgraded to version 3.01 (as part of the new PathTools distribution) =item * Devel::PPPort upgraded to version 3.03 =item * File::Spec upgraded to version 3.01 (as part of the new PathTools distribution) =item * Encode upgraded to version 2.08 =item * ExtUtils::MakeMaker remains at version 6.17, as later stable releases currently available on CPAN have some issues with core modules on some core platforms. =item * I18N::LangTags upgraded to version 0.35 =item * Math::BigInt upgraded to version 1.73 =item * Math::BigRat upgraded to version 0.13 =item * MIME::Base64 upgraded to version 3.05 =item * POSIX::sigprocmask function can now retrieve the current signal mask without also setting it. =item * Time::HiRes upgraded to version 1.65 =back =head1 Utility Changes Perl has a new -dt command-line flag, which enables threads support in the debugger. =head1 Performance Enhancements C<reverse sort ...> is now optimized to sort in reverse, avoiding the generation of a temporary intermediate list. C<for (reverse @foo)> now iterates in reverse, avoiding the generation of a temporary reversed list. =head1 Selected Bug Fixes The regexp engine is now more robust when given invalid utf8 input, as is sometimes generated by buggy XS modules. C<foreach> on threads::shared array used to be able to crash Perl. This bug has now been fixed. A regexp in C<STDOUT>'s destructor used to coredump, because the regexp pad was already freed. This has been fixed. C<goto &> is now more robust - bugs in deep recursion and chained C<goto &> have been fixed. Using C<delete> on an array no longer leaks memory. A C<pop> of an item from a shared array reference no longer causes a leak. C<eval_sv()> failing a taint test could corrupt the stack - this has been fixed. On platforms with 64 bit pointers numeric comparison operators used to erroneously compare the addresses of references that are overloaded, rather than using the overloaded values. This has been fixed. C<read> into a UTF8-encoded buffer with an offset off the end of the buffer no longer mis-calculates buffer lengths. Although Perl has promised since version 5.8 that C<sort()> would be stable, the two cases C<sort {$b cmp $a}> and C<< sort {$b <=> $a} >> could produce non-stable sorts. This is corrected in perl5.8.6. Localising C<$^D> no longer generates a diagnostic message about valid -D flags. =head1 New or Changed Diagnostics For -t and -T, Too late for "-T" option has been changed to the more informative "-T" is on the #! line, it must also be used on the command line =head1 Changed Internals From now on all applications embedding perl will behave as if perl were compiled with -DPERL_USE_SAFE_PUTENV. See "Environment access" in the F<INSTALL> file for details. Most C<C> source files now have comments at the top explaining their purpose, which should help anyone wishing to get an overview of the implementation. =head1 New Tests There are significantly more tests for the C<B> suite of modules. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://bugs.perl.org. There may also be information at http://www.perl.org, the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. You can browse and search the Perl 5 bugs at http://bugs.perl.org/ =head1 SEE ALSO The F<Changes> file for exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perltoc.pod 0000644 00002532550 15125556335 0006746 0 ustar 00 # !!!!!!! DO NOT EDIT THIS FILE !!!!!!! # This file is autogenerated by buildtoc from all the other pods. # Edit those files and run pod/buildtoc to effect changes. =encoding UTF-8 =head1 NAME perltoc - perl documentation table of contents =head1 DESCRIPTION This page provides a brief table of contents for the rest of the Perl documentation set. It is meant to be scanned quickly or grepped through to locate the proper section you're looking for. =head1 BASIC DOCUMENTATION =head2 perl - The Perl 5 language interpreter =over 4 =item SYNOPSIS =item GETTING HELP =over 4 =item Overview =item Tutorials =item Reference Manual =item Internals and C Language Interface =item Miscellaneous =item Language-Specific =item Platform-Specific =item Stubs for Deleted Documents =back =item DESCRIPTION =item AVAILABILITY =item ENVIRONMENT =item AUTHOR =item FILES =item SEE ALSO =item DIAGNOSTICS =item BUGS =item NOTES =back =head2 perlintro -- a brief introduction and overview of Perl =over 4 =item DESCRIPTION =over 4 =item What is Perl? =item Running Perl programs =item Safety net =item Basic syntax overview =item Perl variable types Scalars, Arrays, Hashes =item Variable scoping =item Conditional and looping constructs if, while, for, foreach =item Builtin operators and functions Arithmetic, Numeric comparison, String comparison, Boolean logic, Miscellaneous =item Files and I/O =item Regular expressions Simple matching, Simple substitution, More complex regular expressions, Parentheses for capturing, Other regexp features =item Writing subroutines =item OO Perl =item Using Perl modules =back =item AUTHOR =back =head2 perlrun - how to execute the Perl interpreter =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item #! and quoting on non-Unix systems X<hashbang> X<#!> OS/2, MS-DOS, Win95/NT, VMS =item Location of Perl X<perl, location of interpreter> =item Command Switches X<perl, command switches> X<command switches> B<-0>[I<octal/hexadecimal>] X<-0> X<$/>, B<-a> X<-a> X<autosplit>, B<-C [I<number/list>]> X<-C>, B<-c> X<-c>, B<-d> X<-d> X<-dt>, B<-dt>, B<-d:>I<MOD[=bar,baz]> X<-d> X<-dt>, B<-dt:>I<MOD[=bar,baz]>, B<-D>I<letters> X<-D> X<DEBUGGING> X<-DDEBUGGING>, B<-D>I<number>, B<-e> I<commandline> X<-e>, B<-E> I<commandline> X<-E>, B<-f> X<-f> X<sitecustomize> X<sitecustomize.pl>, B<-F>I<pattern> X<-F>, B<-h> X<-h>, B<-i>[I<extension>] X<-i> X<in-place>, B<-I>I<directory> X<-I> X<@INC>, B<-l>[I<octnum>] X<-l> X<$/> X<$\>, B<-m>[B<->]I<module> X<-m> X<-M>, B<-M>[B<->]I<module>, B<-M>[B<->]I<'module ...'>, B<-[mM]>[B<->]I<module=arg[,arg]...>, B<-n> X<-n>, B<-p> X<-p>, B<-s> X<-s>, B<-S> X<-S>, B<-t> X<-t>, B<-T> X<-T>, B<-u> X<-u>, B<-U> X<-U>, B<-v> X<-v>, B<-V> X<-V>, B<-V:>I<configvar>, B<-w> X<-w>, B<-W> X<-W>, B<-X> X<-X>, B<-x> X<-x>, B<-x>I<directory> =back =item ENVIRONMENT X<perl, environment variables> HOME X<HOME>, LOGDIR X<LOGDIR>, PATH X<PATH>, PERL5LIB X<PERL5LIB>, PERL5OPT X<PERL5OPT>, PERLIO X<PERLIO>, :crlf X<:crlf>, :perlio X<:perlio>, :stdio X<:stdio>, :unix X<:unix>, :win32 X<:win32>, PERLIO_DEBUG X<PERLIO_DEBUG>, PERLLIB X<PERLLIB>, PERL5DB X<PERL5DB>, PERL5DB_THREADED X<PERL5DB_THREADED>, PERL5SHELL (specific to the Win32 port) X<PERL5SHELL>, PERL_ALLOW_NON_IFS_LSP (specific to the Win32 port) X<PERL_ALLOW_NON_IFS_LSP>, PERL_DEBUG_MSTATS X<PERL_DEBUG_MSTATS>, PERL_DESTRUCT_LEVEL X<PERL_DESTRUCT_LEVEL>, PERL_DL_NONLAZY X<PERL_DL_NONLAZY>, PERL_ENCODING X<PERL_ENCODING>, PERL_HASH_SEED X<PERL_HASH_SEED>, PERL_PERTURB_KEYS X<PERL_PERTURB_KEYS>, PERL_HASH_SEED_DEBUG X<PERL_HASH_SEED_DEBUG>, PERL_MEM_LOG X<PERL_MEM_LOG>, PERL_ROOT (specific to the VMS port) X<PERL_ROOT>, PERL_SIGNALS X<PERL_SIGNALS>, PERL_UNICODE X<PERL_UNICODE>, PERL_USE_UNSAFE_INC X<PERL_USE_UNSAFE_INC>, SYS$LOGIN (specific to the VMS port) X<SYS$LOGIN>, PERL_INTERNAL_RAND_SEED X<PERL_INTERNAL_RAND_SEED> =item ORDER OF APPLICATION -I, -M, the PERL5LIB environment variable, combinations of -I, -M and PERL5LIB, the PERL5OPT environment variable, Other complications, arch and version subdirs, sitecustomize.pl =back =head2 perlreftut - Mark's very short tutorial about references =over 4 =item DESCRIPTION =item Who Needs Complicated Data Structures? =item The Solution =item Syntax =over 4 =item Making References =item Using References =item An Example =item Arrow Rule =back =item Solution =item The Rest =item Summary =item Credits =over 4 =item Distribution Conditions =back =back =head2 perldsc - Perl Data Structures Cookbook =over 4 =item DESCRIPTION arrays of arrays, hashes of arrays, arrays of hashes, hashes of hashes, more elaborate constructs =item REFERENCES X<reference> X<dereference> X<dereferencing> X<pointer> =item COMMON MISTAKES =item CAVEAT ON PRECEDENCE X<dereference, precedence> X<dereferencing, precedence> =item WHY YOU SHOULD ALWAYS C<use strict> =item DEBUGGING X<data structure, debugging> X<complex data structure, debugging> X<AoA, debugging> X<HoA, debugging> X<AoH, debugging> X<HoH, debugging> X<array of arrays, debugging> X<hash of arrays, debugging> X<array of hashes, debugging> X<hash of hashes, debugging> =item CODE EXAMPLES =item ARRAYS OF ARRAYS X<array of arrays> X<AoA> =over 4 =item Declaration of an ARRAY OF ARRAYS =item Generation of an ARRAY OF ARRAYS =item Access and Printing of an ARRAY OF ARRAYS =back =item HASHES OF ARRAYS X<hash of arrays> X<HoA> =over 4 =item Declaration of a HASH OF ARRAYS =item Generation of a HASH OF ARRAYS =item Access and Printing of a HASH OF ARRAYS =back =item ARRAYS OF HASHES X<array of hashes> X<AoH> =over 4 =item Declaration of an ARRAY OF HASHES =item Generation of an ARRAY OF HASHES =item Access and Printing of an ARRAY OF HASHES =back =item HASHES OF HASHES X<hash of hashes> X<HoH> =over 4 =item Declaration of a HASH OF HASHES =item Generation of a HASH OF HASHES =item Access and Printing of a HASH OF HASHES =back =item MORE ELABORATE RECORDS X<record> X<structure> X<struct> =over 4 =item Declaration of MORE ELABORATE RECORDS =item Declaration of a HASH OF COMPLEX RECORDS =item Generation of a HASH OF COMPLEX RECORDS =back =item Database Ties =item SEE ALSO =item AUTHOR =back =head2 perllol - Manipulating Arrays of Arrays in Perl =over 4 =item DESCRIPTION =over 4 =item Declaration and Access of Arrays of Arrays =item Growing Your Own =item Access and Printing =item Slices =back =item SEE ALSO =item AUTHOR =back =head2 perlrequick - Perl regular expressions quick start =over 4 =item DESCRIPTION =item The Guide =over 4 =item Simple word matching =item Using character classes =item Matching this or that =item Grouping things and hierarchical matching =item Extracting matches =item Matching repetitions =item More matching =item Search and replace =item The split operator =item C<use re 'strict'> =back =item BUGS =item SEE ALSO =item AUTHOR AND COPYRIGHT =over 4 =item Acknowledgments =back =back =head2 perlretut - Perl regular expressions tutorial =over 4 =item DESCRIPTION =item Part 1: The basics =over 4 =item Simple word matching =item Using character classes =item Matching this or that =item Grouping things and hierarchical matching Z<>0. Start with the first letter in the string C<'a'>, Z<>1. Try the first alternative in the first group C<'abd'>, Z<>2. Match C<'a'> followed by C<'b'>. So far so good, Z<>3. C<'d'> in the regexp doesn't match C<'c'> in the string - a dead end. So backtrack two characters and pick the second alternative in the first group C<'abc'>, Z<>4. Match C<'a'> followed by C<'b'> followed by C<'c'>. We are on a roll and have satisfied the first group. Set C<$1> to C<'abc'>, Z<>5 Move on to the second group and pick the first alternative C<'df'>, Z<>6 Match the C<'d'>, Z<>7. C<'f'> in the regexp doesn't match C<'e'> in the string, so a dead end. Backtrack one character and pick the second alternative in the second group C<'d'>, Z<>8. C<'d'> matches. The second grouping is satisfied, so set C<$2> to C<'d'>, Z<>9. We are at the end of the regexp, so we are done! We have matched C<'abcd'> out of the string C<"abcde"> =item Extracting matches =item Backreferences =item Relative backreferences =item Named backreferences =item Alternative capture group numbering =item Position information =item Non-capturing groupings =item Matching repetitions Z<>0. Start with the first letter in the string C<'t'>, Z<>1. The first quantifier C<'.*'> starts out by matching the whole string "C<the cat in the hat>", Z<>2. C<'a'> in the regexp element C<'at'> doesn't match the end of the string. Backtrack one character, Z<>3. C<'a'> in the regexp element C<'at'> still doesn't match the last letter of the string C<'t'>, so backtrack one more character, Z<>4. Now we can match the C<'a'> and the C<'t'>, Z<>5. Move on to the third element C<'.*'>. Since we are at the end of the string and C<'.*'> can match 0 times, assign it the empty string, Z<>6. We are done! =item Possessive quantifiers =item Building a regexp =item Using regular expressions in Perl =back =item Part 2: Power tools =over 4 =item More on characters, strings, and character classes =item Compiling and saving regular expressions =item Composing regular expressions at runtime =item Embedding comments and modifiers in a regular expression =item Looking ahead and looking behind =item Using independent subexpressions to prevent backtracking =item Conditional expressions =item Defining named patterns =item Recursive patterns =item A bit of magic: executing Perl code in a regular expression =item Backtracking control verbs =item Pragmas and debugging =back =item SEE ALSO =item AUTHOR AND COPYRIGHT =over 4 =item Acknowledgments =back =back =head2 perlootut - Object-Oriented Programming in Perl Tutorial =over 4 =item DATE =item DESCRIPTION =item OBJECT-ORIENTED FUNDAMENTALS =over 4 =item Object =item Class =item Methods =item Attributes =item Polymorphism =item Inheritance =item Encapsulation =item Composition =item Roles =item When to Use OO =back =item PERL OO SYSTEMS =over 4 =item Moose Declarative sugar, Roles built-in, A miniature type system, Full introspection and manipulation, Self-hosted and extensible, Rich ecosystem, Many more features =item Class::Accessor =item Class::Tiny =item Role::Tiny =item OO System Summary L<Moose>, L<Class::Accessor>, L<Class::Tiny>, L<Role::Tiny> =item Other OO Systems =back =item CONCLUSION =back =head2 perlperf - Perl Performance and Optimization Techniques =over 4 =item DESCRIPTION =item OVERVIEW =over 4 =item ONE STEP SIDEWAYS =item ONE STEP FORWARD =item ANOTHER STEP SIDEWAYS =back =item GENERAL GUIDELINES =item BENCHMARKS =over 4 =item Assigning and Dereferencing Variables. =item Search and replace or tr =back =item PROFILING TOOLS =over 4 =item Devel::DProf =item Devel::Profiler =item Devel::SmallProf =item Devel::FastProf =item Devel::NYTProf =back =item SORTING Elapsed Real Time, User CPU Time, System CPU Time =item LOGGING =over 4 =item Logging if DEBUG (constant) =back =item POSTSCRIPT =item SEE ALSO =over 4 =item PERLDOCS =item MAN PAGES =item MODULES =item URLS =back =item AUTHOR =back =head2 perlstyle - Perl style guide =over 4 =item DESCRIPTION =back =head2 perlcheat - Perl 5 Cheat Sheet =over 4 =item DESCRIPTION =over 4 =item The sheet =back =item ACKNOWLEDGEMENTS =item AUTHOR =item SEE ALSO =back =head2 perltrap - Perl traps for the unwary =over 4 =item DESCRIPTION =over 4 =item Awk Traps =item C/C++ Traps =item JavaScript Traps =item Sed Traps =item Shell Traps =item Perl Traps =back =back =head2 perldebtut - Perl debugging tutorial =over 4 =item DESCRIPTION =item use strict =item Looking at data and -w and v =item help =item Stepping through code =item Placeholder for a, w, t, T =item REGULAR EXPRESSIONS =item OUTPUT TIPS =item CGI =item GUIs =item SUMMARY =item SEE ALSO =item AUTHOR =item CONTRIBUTORS =back =head2 perlfaq - Frequently asked questions about Perl =over 4 =item VERSION =item DESCRIPTION =over 4 =item Where to find the perlfaq =item How to use the perlfaq =item How to contribute to the perlfaq =item What if my question isn't answered in the FAQ? =back =item TABLE OF CONTENTS perlfaq1 - General Questions About Perl, perlfaq2 - Obtaining and Learning about Perl, perlfaq3 - Programming Tools, perlfaq4 - Data Manipulation, perlfaq5 - Files and Formats, perlfaq6 - Regular Expressions, perlfaq7 - General Perl Language Issues, perlfaq8 - System Interaction, perlfaq9 - Web, Email and Networking =item THE QUESTIONS =over 4 =item L<perlfaq1>: General Questions About Perl =item L<perlfaq2>: Obtaining and Learning about Perl =item L<perlfaq3>: Programming Tools =item L<perlfaq4>: Data Manipulation =item L<perlfaq5>: Files and Formats =item L<perlfaq6>: Regular Expressions =item L<perlfaq7>: General Perl Language Issues =item L<perlfaq8>: System Interaction =item L<perlfaq9>: Web, Email and Networking =back =item CREDITS =item AUTHOR AND COPYRIGHT =back =head2 perlfaq1 - General Questions About Perl =over 4 =item VERSION =item DESCRIPTION =over 4 =item What is Perl? =item Who supports Perl? Who develops it? Why is it free? =item Which version of Perl should I use? =item What are Perl 4, Perl 5, or Raku (Perl 6)? =item What is Raku (Perl 6)? =item How stable is Perl? =item How often are new versions of Perl released? =item Is Perl difficult to learn? =item How does Perl compare with other languages like Java, Python, REXX, Scheme, or Tcl? =item Can I do [task] in Perl? =item When shouldn't I program in Perl? =item What's the difference between "perl" and "Perl"? =item What is a JAPH? =item How can I convince others to use Perl? L<http://www.perl.org/about.html>, L<http://perltraining.com.au/whyperl.html> =back =item AUTHOR AND COPYRIGHT =back =head2 perlfaq2 - Obtaining and Learning about Perl =over 4 =item VERSION =item DESCRIPTION =over 4 =item What machines support Perl? Where do I get it? =item How can I get a binary version of Perl? =item I don't have a C compiler. How can I build my own Perl interpreter? =item I copied the Perl binary from one machine to another, but scripts don't work. =item I grabbed the sources and tried to compile but gdbm/dynamic loading/malloc/linking/... failed. How do I make it work? =item What modules and extensions are available for Perl? What is CPAN? =item Where can I get information on Perl? L<http://www.perl.org/>, L<http://perldoc.perl.org/>, L<http://learn.perl.org/> =item What is perl.com? Perl Mongers? pm.org? perl.org? cpan.org? L<http://www.perl.org/>, L<http://learn.perl.org/>, L<http://jobs.perl.org/>, L<http://lists.perl.org/> =item Where can I post questions? =item Perl Books =item Which magazines have Perl content? =item Which Perl blogs should I read? =item What mailing lists are there for Perl? =item Where can I buy a commercial version of Perl? =item Where do I send bug reports? =back =item AUTHOR AND COPYRIGHT =back =head2 perlfaq3 - Programming Tools =over 4 =item VERSION =item DESCRIPTION =over 4 =item How do I do (anything)? Basics, L<perldata> - Perl data types, L<perlvar> - Perl pre-defined variables, L<perlsyn> - Perl syntax, L<perlop> - Perl operators and precedence, L<perlsub> - Perl subroutines, Execution, L<perlrun> - how to execute the Perl interpreter, L<perldebug> - Perl debugging, Functions, L<perlfunc> - Perl builtin functions, Objects, L<perlref> - Perl references and nested data structures, L<perlmod> - Perl modules (packages and symbol tables), L<perlobj> - Perl objects, L<perltie> - how to hide an object class in a simple variable, Data Structures, L<perlref> - Perl references and nested data structures, L<perllol> - Manipulating arrays of arrays in Perl, L<perldsc> - Perl Data Structures Cookbook, Modules, L<perlmod> - Perl modules (packages and symbol tables), L<perlmodlib> - constructing new Perl modules and finding existing ones, Regexes, L<perlre> - Perl regular expressions, L<perlfunc> - Perl builtin functions>, L<perlop> - Perl operators and precedence, L<perllocale> - Perl locale handling (internationalization and localization), Moving to perl5, L<perltrap> - Perl traps for the unwary, L<perl>, Linking with C, L<perlxstut> - Tutorial for writing XSUBs, L<perlxs> - XS language reference manual, L<perlcall> - Perl calling conventions from C, L<perlguts> - Introduction to the Perl API, L<perlembed> - how to embed perl in your C program, Various =item How can I use Perl interactively? =item How do I find which modules are installed on my system? =item How do I debug my Perl programs? =item How do I profile my Perl programs? =item How do I cross-reference my Perl programs? =item Is there a pretty-printer (formatter) for Perl? =item Is there an IDE or Windows Perl Editor? Eclipse, Enginsite, IntelliJ IDEA, Kephra, Komodo, Notepad++, Open Perl IDE, OptiPerl, Padre, PerlBuilder, visiPerl+, Visual Perl, Zeus, GNU Emacs, MicroEMACS, XEmacs, Jed, Vim, Vile, MultiEdit, SlickEdit, ConTEXT, bash, zsh, BBEdit and TextWrangler =item Where can I get Perl macros for vi? =item Where can I get perl-mode or cperl-mode for emacs? X<emacs> =item How can I use curses with Perl? =item How can I write a GUI (X, Tk, Gtk, etc.) in Perl? X<GUI> X<Tk> X<Wx> X<WxWidgets> X<Gtk> X<Gtk2> X<CamelBones> X<Qt> Tk, Wx, Gtk and Gtk2, Win32::GUI, CamelBones, Qt, Athena =item How can I make my Perl program run faster? =item How can I make my Perl program take less memory? Don't slurp!, Use map and grep selectively, Avoid unnecessary quotes and stringification, Pass by reference, Tie large variables to disk =item Is it safe to return a reference to local or lexical data? =item How can I free an array or hash so my program shrinks? =item How can I make my CGI script more efficient? =item How can I hide the source for my Perl program? =item How can I compile my Perl program into byte code or C? =item How can I get C<#!perl> to work on [MS-DOS,NT,...]? =item Can I write useful Perl programs on the command line? =item Why don't Perl one-liners work on my DOS/Mac/VMS system? =item Where can I learn about CGI or Web programming in Perl? =item Where can I learn about object-oriented Perl programming? =item Where can I learn about linking C with Perl? =item I've read perlembed, perlguts, etc., but I can't embed perl in my C program; what am I doing wrong? =item When I tried to run my script, I got this message. What does it mean? =item What's MakeMaker? =back =item AUTHOR AND COPYRIGHT =back =head2 perlfaq4 - Data Manipulation =over 4 =item VERSION =item DESCRIPTION =item Data: Numbers =over 4 =item Why am I getting long decimals (eg, 19.9499999999999) instead of the numbers I should be getting (eg, 19.95)? =item Why is int() broken? =item Why isn't my octal data interpreted correctly? =item Does Perl have a round() function? What about ceil() and floor()? Trig functions? =item How do I convert between numeric representations/bases/radixes? How do I convert hexadecimal into decimal, How do I convert from decimal to hexadecimal, How do I convert from octal to decimal, How do I convert from decimal to octal, How do I convert from binary to decimal, How do I convert from decimal to binary =item Why doesn't & work the way I want it to? =item How do I multiply matrices? =item How do I perform an operation on a series of integers? =item How can I output Roman numerals? =item Why aren't my random numbers random? =item How do I get a random number between X and Y? =back =item Data: Dates =over 4 =item How do I find the day or week of the year? =item How do I find the current century or millennium? =item How can I compare two dates and find the difference? =item How can I take a string and turn it into epoch seconds? =item How can I find the Julian Day? =item How do I find yesterday's date? X<date> X<yesterday> X<DateTime> X<Date::Calc> X<Time::Local> X<daylight saving time> X<day> X<Today_and_Now> X<localtime> X<timelocal> =item Does Perl have a Year 2000 or 2038 problem? Is Perl Y2K compliant? =back =item Data: Strings =over 4 =item How do I validate input? =item How do I unescape a string? =item How do I remove consecutive pairs of characters? =item How do I expand function calls in a string? =item How do I find matching/nesting anything? =item How do I reverse a string? =item How do I expand tabs in a string? =item How do I reformat a paragraph? =item How can I access or change N characters of a string? =item How do I change the Nth occurrence of something? =item How can I count the number of occurrences of a substring within a string? =item How do I capitalize all the words on one line? X<Text::Autoformat> X<capitalize> X<case, title> X<case, sentence> =item How can I split a [character]-delimited string except when inside [character]? =item How do I strip blank space from the beginning/end of a string? =item How do I pad a string with blanks or pad a number with zeroes? =item How do I extract selected columns from a string? =item How do I find the soundex value of a string? =item How can I expand variables in text strings? =item What's wrong with always quoting "$vars"? =item Why don't my E<lt>E<lt>HERE documents work? There must be no space after the E<lt>E<lt> part, There (probably) should be a semicolon at the end of the opening token, You can't (easily) have any space in front of the tag, There needs to be at least a line separator after the end token =back =item Data: Arrays =over 4 =item What is the difference between a list and an array? =item What is the difference between $array[1] and @array[1]? =item How can I remove duplicate elements from a list or array? =item How can I tell whether a certain element is contained in a list or array? =item How do I compute the difference of two arrays? How do I compute the intersection of two arrays? =item How do I test whether two arrays or hashes are equal? =item How do I find the first array element for which a condition is true? =item How do I handle linked lists? =item How do I handle circular lists? X<circular> X<array> X<Tie::Cycle> X<Array::Iterator::Circular> X<cycle> X<modulus> =item How do I shuffle an array randomly? =item How do I process/modify each element of an array? =item How do I select a random element from an array? =item How do I permute N elements of a list? X<List::Permutor> X<permute> X<Algorithm::Loops> X<Knuth> X<The Art of Computer Programming> X<Fischer-Krause> =item How do I sort an array by (anything)? =item How do I manipulate arrays of bits? =item Why does defined() return true on empty arrays and hashes? =back =item Data: Hashes (Associative Arrays) =over 4 =item How do I process an entire hash? =item How do I merge two hashes? X<hash> X<merge> X<slice, hash> =item What happens if I add or remove keys from a hash while iterating over it? =item How do I look up a hash element by value? =item How can I know how many entries are in a hash? =item How do I sort a hash (optionally by value instead of key)? =item How can I always keep my hash sorted? X<hash tie sort DB_File Tie::IxHash> =item What's the difference between "delete" and "undef" with hashes? =item Why don't my tied hashes make the defined/exists distinction? =item How do I reset an each() operation part-way through? =item How can I get the unique keys from two hashes? =item How can I store a multidimensional array in a DBM file? =item How can I make my hash remember the order I put elements into it? =item Why does passing a subroutine an undefined element in a hash create it? =item How can I make the Perl equivalent of a C structure/C++ class/hash or array of hashes or arrays? =item How can I use a reference as a hash key? =item How can I check if a key exists in a multilevel hash? =item How can I prevent addition of unwanted keys into a hash? =back =item Data: Misc =over 4 =item How do I handle binary data correctly? =item How do I determine whether a scalar is a number/whole/integer/float? =item How do I keep persistent data across program calls? =item How do I print out or copy a recursive data structure? =item How do I define methods for every class/object? =item How do I verify a credit card checksum? =item How do I pack arrays of doubles or floats for XS code? =back =item AUTHOR AND COPYRIGHT =back =head2 perlfaq5 - Files and Formats =over 4 =item VERSION =item DESCRIPTION =over 4 =item How do I flush/unbuffer an output filehandle? Why must I do this? X<flush> X<buffer> X<unbuffer> X<autoflush> =item How do I change, delete, or insert a line in a file, or append to the beginning of a file? X<file, editing> =item How do I count the number of lines in a file? X<file, counting lines> X<lines> X<line> =item How do I delete the last N lines from a file? X<lines> X<file> =item How can I use Perl's C<-i> option from within a program? X<-i> X<in-place> =item How can I copy a file? X<copy> X<file, copy> X<File::Copy> =item How do I make a temporary file name? X<file, temporary> =item How can I manipulate fixed-record-length files? X<fixed-length> X<file, fixed-length records> =item How can I make a filehandle local to a subroutine? How do I pass filehandles between subroutines? How do I make an array of filehandles? X<filehandle, local> X<filehandle, passing> X<filehandle, reference> =item How can I use a filehandle indirectly? X<filehandle, indirect> =item How can I open a filehandle to a string? X<string> X<open> X<IO::String> X<filehandle> =item How can I set up a footer format to be used with write()? X<footer> =item How can I write() into a string? X<write, into a string> =item How can I output my numbers with commas added? X<number, commify> =item How can I translate tildes (~) in a filename? X<tilde> X<tilde expansion> =item How come when I open a file read-write it wipes it out? X<clobber> X<read-write> X<clobbering> X<truncate> X<truncating> =item Why do I sometimes get an "Argument list too long" when I use E<lt>*E<gt>? X<argument list too long> =item How can I open a file named with a leading ">" or trailing blanks? X<filename, special characters> =item How can I reliably rename a file? X<rename> X<mv> X<move> X<file, rename> =item How can I lock a file? X<lock> X<file, lock> X<flock> =item Why can't I just open(FH, "E<gt>file.lock")? X<lock, lockfile race condition> =item I still don't get locking. I just want to increment the number in the file. How can I do this? X<counter> X<file, counter> =item All I want to do is append a small amount of text to the end of a file. Do I still have to use locking? X<append> X<file, append> =item How do I randomly update a binary file? X<file, binary patch> =item How do I get a file's timestamp in perl? X<timestamp> X<file, timestamp> =item How do I set a file's timestamp in perl? X<timestamp> X<file, timestamp> =item How do I print to more than one file at once? X<print, to multiple files> =item How can I read in an entire file all at once? X<slurp> X<file, slurping> =item How can I read in a file by paragraphs? X<file, reading by paragraphs> =item How can I read a single character from a file? From the keyboard? X<getc> X<file, reading one character at a time> =item How can I tell whether there's a character waiting on a filehandle? =item How do I do a C<tail -f> in perl? X<tail> X<IO::Handle> X<File::Tail> X<clearerr> =item How do I dup() a filehandle in Perl? X<dup> =item How do I close a file descriptor by number? X<file, closing file descriptors> X<POSIX> X<close> =item Why can't I use "C:\temp\foo" in DOS paths? Why doesn't `C:\temp\foo.exe` work? X<filename, DOS issues> =item Why doesn't glob("*.*") get all the files? X<glob> =item Why does Perl let me delete read-only files? Why does C<-i> clobber protected files? Isn't this a bug in Perl? =item How do I select a random line from a file? X<file, selecting a random line> =item Why do I get weird spaces when I print an array of lines? =item How do I traverse a directory tree? =item How do I delete a directory tree? =item How do I copy an entire directory? =back =item AUTHOR AND COPYRIGHT =back =head2 perlfaq6 - Regular Expressions =over 4 =item VERSION =item DESCRIPTION =over 4 =item How can I hope to use regular expressions without creating illegible and unmaintainable code? X<regex, legibility> X<regexp, legibility> X<regular expression, legibility> X</x> Comments Outside the Regex, Comments Inside the Regex, Different Delimiters =item I'm having trouble matching over more than one line. What's wrong? X<regex, multiline> X<regexp, multiline> X<regular expression, multiline> =item How can I pull out lines between two patterns that are themselves on different lines? X<..> =item How do I match XML, HTML, or other nasty, ugly things with a regex? X<regex, XML> X<regex, HTML> X<XML> X<HTML> X<pain> X<frustration> X<sucking out, will to live> =item I put a regular expression into $/ but it didn't work. What's wrong? X<$/, regexes in> X<$INPUT_RECORD_SEPARATOR, regexes in> X<$RS, regexes in> =item How do I substitute case-insensitively on the LHS while preserving case on the RHS? X<replace, case preserving> X<substitute, case preserving> X<substitution, case preserving> X<s, case preserving> =item How can I make C<\w> match national character sets? X<\w> =item How can I match a locale-smart version of C</[a-zA-Z]/>? X<alpha> =item How can I quote a variable to use in a regex? X<regex, escaping> X<regexp, escaping> X<regular expression, escaping> =item What is C</o> really for? X</o, regular expressions> X<compile, regular expressions> =item How do I use a regular expression to strip C-style comments from a file? =item Can I use Perl regular expressions to match balanced text? X<regex, matching balanced test> X<regexp, matching balanced test> X<regular expression, matching balanced test> X<possessive> X<PARNO> X<Text::Balanced> X<Regexp::Common> X<backtracking> X<recursion> =item What does it mean that regexes are greedy? How can I get around it? X<greedy> X<greediness> =item How do I process each word on each line? X<word> =item How can I print out a word-frequency or line-frequency summary? =item How can I do approximate matching? X<match, approximate> X<matching, approximate> =item How do I efficiently match many regular expressions at once? X<regex, efficiency> X<regexp, efficiency> X<regular expression, efficiency> =item Why don't word-boundary searches with C<\b> work for me? X<\b> =item Why does using $&, $`, or $' slow my program down? X<$MATCH> X<$&> X<$POSTMATCH> X<$'> X<$PREMATCH> X<$`> =item What good is C<\G> in a regular expression? X<\G> =item Are Perl regexes DFAs or NFAs? Are they POSIX compliant? X<DFA> X<NFA> X<POSIX> =item What's wrong with using grep in a void context? X<grep> =item How can I match strings with multibyte characters? X<regex, and multibyte characters> X<regexp, and multibyte characters> X<regular expression, and multibyte characters> X<martian> X<encoding, Martian> =item How do I match a regular expression that's in a variable? X<regex, in variable> X<eval> X<regex> X<quotemeta> X<\Q, regex> X<\E, regex> X<qr//> =back =item AUTHOR AND COPYRIGHT =back =head2 perlfaq7 - General Perl Language Issues =over 4 =item VERSION =item DESCRIPTION =over 4 =item Can I get a BNF/yacc/RE for the Perl language? =item What are all these $@%&* punctuation signs, and how do I know when to use them? =item Do I always/never have to quote my strings or use semicolons and commas? =item How do I skip some return values? =item How do I temporarily block warnings? =item What's an extension? =item Why do Perl operators have different precedence than C operators? =item How do I declare/create a structure? =item How do I create a module? =item How do I adopt or take over a module already on CPAN? =item How do I create a class? X<class, creation> X<package> =item How can I tell if a variable is tainted? =item What's a closure? =item What is variable suicide and how can I prevent it? =item How can I pass/return a {Function, FileHandle, Array, Hash, Method, Regex}? Passing Variables and Functions, Passing Filehandles, Passing Regexes, Passing Methods =item How do I create a static variable? =item What's the difference between dynamic and lexical (static) scoping? Between local() and my()? =item How can I access a dynamic variable while a similarly named lexical is in scope? =item What's the difference between deep and shallow binding? =item Why doesn't "my($foo) = E<lt>$fhE<gt>;" work right? =item How do I redefine a builtin function, operator, or method? =item What's the difference between calling a function as &foo and foo()? =item How do I create a switch or case statement? =item How can I catch accesses to undefined variables, functions, or methods? =item Why can't a method included in this same file be found? =item How can I find out my current or calling package? =item How can I comment out a large block of Perl code? =item How do I clear a package? =item How can I use a variable as a variable name? =item What does "bad interpreter" mean? =item Do I need to recompile XS modules when there is a change in the C library? =back =item AUTHOR AND COPYRIGHT =back =head2 perlfaq8 - System Interaction =over 4 =item VERSION =item DESCRIPTION =over 4 =item How do I find out which operating system I'm running under? =item How come exec() doesn't return? X<exec> X<system> X<fork> X<open> X<pipe> =item How do I do fancy stuff with the keyboard/screen/mouse? Keyboard, Screen, Mouse =item How do I print something out in color? =item How do I read just one key without waiting for a return key? =item How do I check whether input is ready on the keyboard? =item How do I clear the screen? =item How do I get the screen size? =item How do I ask the user for a password? =item How do I read and write the serial port? lockfiles, open mode, end of line, flushing output, non-blocking input =item How do I decode encrypted password files? =item How do I start a process in the background? STDIN, STDOUT, and STDERR are shared, Signals, Zombies =item How do I trap control characters/signals? =item How do I modify the shadow password file on a Unix system? =item How do I set the time and date? =item How can I sleep() or alarm() for under a second? X<Time::HiRes> X<BSD::Itimer> X<sleep> X<select> =item How can I measure time under a second? X<Time::HiRes> X<BSD::Itimer> X<sleep> X<select> =item How can I do an atexit() or setjmp()/longjmp()? (Exception handling) =item Why doesn't my sockets program work under System V (Solaris)? What does the error message "Protocol not supported" mean? =item How can I call my system's unique C functions from Perl? =item Where do I get the include files to do ioctl() or syscall()? =item Why do setuid perl scripts complain about kernel problems? =item How can I open a pipe both to and from a command? =item Why can't I get the output of a command with system()? =item How can I capture STDERR from an external command? =item Why doesn't open() return an error when a pipe open fails? =item What's wrong with using backticks in a void context? =item How can I call backticks without shell processing? =item Why can't my script read from STDIN after I gave it EOF (^D on Unix, ^Z on MS-DOS)? =item How can I convert my shell script to perl? =item Can I use perl to run a telnet or ftp session? =item How can I write expect in Perl? =item Is there a way to hide perl's command line from programs such as "ps"? =item I {changed directory, modified my environment} in a perl script. How come the change disappeared when I exited the script? How do I get my changes to be visible? Unix =item How do I close a process's filehandle without waiting for it to complete? =item How do I fork a daemon process? =item How do I find out if I'm running interactively or not? =item How do I timeout a slow event? =item How do I set CPU limits? X<BSD::Resource> X<limit> X<CPU> =item How do I avoid zombies on a Unix system? =item How do I use an SQL database? =item How do I make a system() exit on control-C? =item How do I open a file without blocking? =item How do I tell the difference between errors from the shell and perl? =item How do I install a module from CPAN? =item What's the difference between require and use? =item How do I keep my own module/library directory? =item How do I add the directory my program lives in to the module/library search path? =item How do I add a directory to my include path (@INC) at runtime? the C<PERLLIB> environment variable, the C<PERL5LIB> environment variable, the C<perl -Idir> command line flag, the C<lib> pragma:, the L<local::lib> module: =item Where are modules installed? =item What is socket.ph and where do I get it? =back =item AUTHOR AND COPYRIGHT =back =head2 perlfaq9 - Web, Email and Networking =over 4 =item VERSION =item DESCRIPTION =over 4 =item Should I use a web framework? =item Which web framework should I use? X<framework> X<CGI.pm> X<CGI> X<Catalyst> X<Dancer> L<Catalyst>, L<Dancer2>, L<Mojolicious>, L<Web::Simple> =item What is Plack and PSGI? =item How do I remove HTML from a string? =item How do I extract URLs? =item How do I fetch an HTML file? =item How do I automate an HTML form submission? =item How do I decode or create those %-encodings on the web? X<URI> X<URI::Escape> X<RFC 2396> =item How do I redirect to another page? =item How do I put a password on my web pages? =item How do I make sure users can't enter values into a form that causes my CGI script to do bad things? =item How do I parse a mail header? =item How do I check a valid mail address? =item How do I decode a MIME/BASE64 string? =item How do I find the user's mail address? =item How do I send email? L<Email::Sender::Transport::Sendmail>, L<Email::Sender::Transport::SMTP> =item How do I use MIME to make an attachment to a mail message? =item How do I read email? =item How do I find out my hostname, domainname, or IP address? X<hostname, domainname, IP address, host, domain, hostfqdn, inet_ntoa, gethostbyname, Socket, Net::Domain, Sys::Hostname> =item How do I fetch/put an (S)FTP file? =item How can I do RPC in Perl? =back =item AUTHOR AND COPYRIGHT =back =head2 perlsyn - Perl syntax =over 4 =item DESCRIPTION =over 4 =item Declarations X<declaration> X<undef> X<undefined> X<uninitialized> =item Comments X<comment> X<#> =item Simple Statements X<statement> X<semicolon> X<expression> X<;> =item Statement Modifiers X<statement modifier> X<modifier> X<if> X<unless> X<while> X<until> X<when> X<foreach> X<for> =item Compound Statements X<statement, compound> X<block> X<bracket, curly> X<curly bracket> X<brace> X<{> X<}> X<if> X<unless> X<given> X<while> X<until> X<foreach> X<for> X<continue> =item Loop Control X<loop control> X<loop, control> X<next> X<last> X<redo> X<continue> =item For Loops X<for> X<foreach> =item Foreach Loops X<for> X<foreach> =item Basic BLOCKs X<block> =item Switch Statements =item Goto X<goto> =item The Ellipsis Statement X<...> X<... statement> X<ellipsis operator> X<elliptical statement> X<unimplemented statement> X<unimplemented operator> X<yada-yada> X<yada-yada operator> X<... operator> X<whatever operator> X<triple-dot operator> =item PODs: Embedded Documentation X<POD> X<documentation> =item Plain Old Comments (Not!) X<comment> X<line> X<#> X<preprocessor> X<eval> =item Experimental Details on given and when Z<>1, Z<>2, Z<>3, Z<>4, Z<>5, Z<>6, Z<>7, Z<>8, Z<>9, Z<>10 =back =back =head2 perldata - Perl data types =over 4 =item DESCRIPTION =over 4 =item Variable names X<variable, name> X<variable name> X<data type> X<type> =item Identifier parsing X<identifiers> =item Context X<context> X<scalar context> X<list context> =item Scalar values X<scalar> X<number> X<string> X<reference> =item Scalar value constructors X<scalar, literal> X<scalar, constant> =item List value constructors X<list> =item Subscripts =item Multi-dimensional array emulation =item Slices X<slice> X<array, slice> X<hash, slice> =item Typeglobs and Filehandles X<typeglob> X<filehandle> X<*> =back =item SEE ALSO =back =head2 perlop - Perl operators and precedence =over 4 =item DESCRIPTION =over 4 =item Operator Precedence and Associativity X<operator, precedence> X<precedence> X<associativity> =item Terms and List Operators (Leftward) X<list operator> X<operator, list> X<term> =item The Arrow Operator X<arrow> X<dereference> X<< -> >> =item Auto-increment and Auto-decrement X<increment> X<auto-increment> X<++> X<decrement> X<auto-decrement> X<--> =item Exponentiation X<**> X<exponentiation> X<power> =item Symbolic Unary Operators X<unary operator> X<operator, unary> =item Binding Operators X<binding> X<operator, binding> X<=~> X<!~> =item Multiplicative Operators X<operator, multiplicative> =item Additive Operators X<operator, additive> =item Shift Operators X<shift operator> X<operator, shift> X<<< << >>> X<<< >> >>> X<right shift> X<left shift> X<bitwise shift> X<shl> X<shr> X<shift, right> X<shift, left> =item Named Unary Operators X<operator, named unary> =item Relational Operators X<relational operator> X<operator, relational> =item Equality Operators X<equality> X<equal> X<equals> X<operator, equality> =item Class Instance Operator X<isa operator> =item Smartmatch Operator 1. Empty hashes or arrays match, 2. That is, each element smartmatches the element of the same index in the other array.[3], 3. If a circular reference is found, fall back to referential equality, 4. Either an actual number, or a string that looks like one =item Bitwise And X<operator, bitwise, and> X<bitwise and> X<&> =item Bitwise Or and Exclusive Or X<operator, bitwise, or> X<bitwise or> X<|> X<operator, bitwise, xor> X<bitwise xor> X<^> =item C-style Logical And X<&&> X<logical and> X<operator, logical, and> =item C-style Logical Or X<||> X<operator, logical, or> =item Logical Defined-Or X<//> X<operator, logical, defined-or> =item Range Operators X<operator, range> X<range> X<..> X<...> =item Conditional Operator X<operator, conditional> X<operator, ternary> X<ternary> X<?:> =item Assignment Operators X<assignment> X<operator, assignment> X<=> X<**=> X<+=> X<*=> X<&=> X<<< <<= >>> X<&&=> X<-=> X</=> X<|=> X<<< >>= >>> X<||=> X<//=> X<.=> X<%=> X<^=> X<x=> X<&.=> X<|.=> X<^.=> =item Comma Operator X<comma> X<operator, comma> X<,> =item List Operators (Rightward) X<operator, list, rightward> X<list operator> =item Logical Not X<operator, logical, not> X<not> =item Logical And X<operator, logical, and> X<and> =item Logical or and Exclusive Or X<operator, logical, or> X<operator, logical, xor> X<operator, logical, exclusive or> X<or> X<xor> =item C Operators Missing From Perl X<operator, missing from perl> X<&> X<*> X<typecasting> X<(TYPE)> unary &, unary *, (TYPE) =item Quote and Quote-like Operators X<operator, quote> X<operator, quote-like> X<q> X<qq> X<qx> X<qw> X<m> X<qr> X<s> X<tr> X<'> X<''> X<"> X<""> X<//> X<`> X<``> X<<< << >>> X<escape sequence> X<escape> [1], [2], [3], [4], [5], [6], [7], [8] =item Regexp Quote-Like Operators X<operator, regexp> C<qr/I<STRING>/msixpodualn> X<qr> X</i> X</m> X</o> X</s> X</x> X</p>, C<m/I<PATTERN>/msixpodualngc> X<m> X<operator, match> X<regexp, options> X<regexp> X<regex, options> X<regex> X</m> X</s> X</i> X</x> X</p> X</o> X</g> X</c>, C</I<PATTERN>/msixpodualngc>, The empty pattern C<//>, Matching in list context, C<\G I<assertion>>, C<m?I<PATTERN>?msixpodualngc> X<?> X<operator, match-once>, C<s/I<PATTERN>/I<REPLACEMENT>/msixpodualngcer> X<s> X<substitute> X<substitution> X<replace> X<regexp, replace> X<regexp, substitute> X</m> X</s> X</i> X</x> X</p> X</o> X</g> X</c> X</e> X</r> =item Quote-Like Operators X<operator, quote-like> C<q/I<STRING>/> X<q> X<quote, single> X<'> X<''>, C<'I<STRING>'>, C<qq/I<STRING>/> X<qq> X<quote, double> X<"> X<"">, C<"I<STRING>">, C<qx/I<STRING>/> X<qx> X<`> X<``> X<backtick>, C<`I<STRING>`>, C<qw/I<STRING>/> X<qw> X<quote, list> X<quote, words>, C<tr/I<SEARCHLIST>/I<REPLACEMENTLIST>/cdsr> X<tr> X<y> X<transliterate> X</c> X</d> X</s>, C<y/I<SEARCHLIST>/I<REPLACEMENTLIST>/cdsr>, C<< <<I<EOF> >> X<here-doc> X<heredoc> X<here-document> X<<< << >>>, Double Quotes, Single Quotes, Backticks, Indented Here-docs =item Gory details of parsing quoted constructs X<quote, gory details> Finding the end, Interpolation X<interpolation>, C<<<'EOF'>, C<m''>, the pattern of C<s'''>, C<''>, C<q//>, C<tr'''>, C<y'''>, the replacement of C<s'''>, C<tr///>, C<y///>, C<"">, C<``>, C<qq//>, C<qx//>, C<< <file*glob> >>, C<<<"EOF">, the replacement of C<s///>, C<RE> in C<m?RE?>, C</RE/>, C<m/RE/>, C<s/RE/foo/>,, parsing regular expressions X<regexp, parse>, Optimization of regular expressions X<regexp, optimization> =item I/O Operators X<operator, i/o> X<operator, io> X<io> X<while> X<filehandle> X<< <> >> X<< <<>> >> X<@ARGV> =item Constant Folding X<constant folding> X<folding> =item No-ops X<no-op> X<nop> =item Bitwise String Operators X<operator, bitwise, string> X<&.> X<|.> X<^.> X<~.> =item Integer Arithmetic X<integer> =item Floating-point Arithmetic =item Bigger Numbers X<number, arbitrary precision> =back =back =head2 perlsub - Perl subroutines =over 4 =item SYNOPSIS =item DESCRIPTION documented later in this document, documented in L<perlmod>, documented in L<perlobj>, documented in L<perltie>, documented in L<PerlIO::via>, documented in L<perlfunc>, documented in L<UNIVERSAL>, documented in L<perldebguts>, undocumented, used internally by the L<overload> feature =over 4 =item Signatures =item Private Variables via my() X<my> X<variable, lexical> X<lexical> X<lexical variable> X<scope, lexical> X<lexical scope> X<attributes, my> =item Persistent Private Variables X<state> X<state variable> X<static> X<variable, persistent> X<variable, static> X<closure> =item Temporary Values via local() X<local> X<scope, dynamic> X<dynamic scope> X<variable, local> X<variable, temporary> =item Lvalue subroutines X<lvalue> X<subroutine, lvalue> =item Lexical Subroutines X<my sub> X<state sub> X<our sub> X<subroutine, lexical> =item Passing Symbol Table Entries (typeglobs) X<typeglob> X<*> =item When to Still Use local() X<local> X<variable, local> =item Pass by Reference X<pass by reference> X<pass-by-reference> X<reference> =item Prototypes X<prototype> X<subroutine, prototype> =item Constant Functions X<constant> =item Overriding Built-in Functions X<built-in> X<override> X<CORE> X<CORE::GLOBAL> =item Autoloading X<autoloading> X<AUTOLOAD> =item Subroutine Attributes X<attribute> X<subroutine, attribute> X<attrs> =back =item SEE ALSO =back =head2 perlfunc - Perl builtin functions =over 4 =item DESCRIPTION =over 4 =item Perl Functions by Category X<function> Functions for SCALARs or strings X<scalar> X<string> X<character>, Regular expressions and pattern matching X<regular expression> X<regex> X<regexp>, Numeric functions X<numeric> X<number> X<trigonometric> X<trigonometry>, Functions for real @ARRAYs X<array>, Functions for list data X<list>, Functions for real %HASHes X<hash>, Input and output functions X<I/O> X<input> X<output> X<dbm>, Functions for fixed-length data or records, Functions for filehandles, files, or directories X<file> X<filehandle> X<directory> X<pipe> X<link> X<symlink>, Keywords related to the control flow of your Perl program X<control flow>, Keywords related to scoping, Miscellaneous functions, Functions for processes and process groups X<process> X<pid> X<process id>, Keywords related to Perl modules X<module>, Keywords related to classes and object-orientation X<object> X<class> X<package>, Low-level socket functions X<socket> X<sock>, System V interprocess communication functions X<IPC> X<System V> X<semaphore> X<shared memory> X<memory> X<message>, Fetching user and group info X<user> X<group> X<password> X<uid> X<gid> X<passwd> X</etc/passwd>, Fetching network info X<network> X<protocol> X<host> X<hostname> X<IP> X<address> X<service>, Time-related functions X<time> X<date>, Non-function keywords =item Portability X<portability> X<Unix> X<portable> =item Alphabetical Listing of Perl Functions -I<X> FILEHANDLE X<-r>X<-w>X<-x>X<-o>X<-R>X<-W>X<-X>X<-O>X<-e>X<-z>X<-s>X<-f>X<-d>X<-l>X<-p> X<-S>X<-b>X<-c>X<-t>X<-u>X<-g>X<-k>X<-T>X<-B>X<-M>X<-A>X<-C>, -I<X> EXPR, -I<X> DIRHANDLE, -I<X>, abs VALUE X<abs> X<absolute>, abs, accept NEWSOCKET,GENERICSOCKET X<accept>, alarm SECONDS X<alarm> X<SIGALRM> X<timer>, alarm, atan2 Y,X X<atan2> X<arctangent> X<tan> X<tangent>, bind SOCKET,NAME X<bind>, binmode FILEHANDLE, LAYER X<binmode> X<binary> X<text> X<DOS> X<Windows>, binmode FILEHANDLE, bless REF,CLASSNAME X<bless>, bless REF, break, caller EXPR X<caller> X<call stack> X<stack> X<stack trace>, caller, chdir EXPR X<chdir> X<cd> X<directory, change>, chdir FILEHANDLE, chdir DIRHANDLE, chdir, chmod LIST X<chmod> X<permission> X<mode>, chomp VARIABLE X<chomp> X<INPUT_RECORD_SEPARATOR> X<$/> X<newline> X<eol>, chomp( LIST ), chomp, chop VARIABLE X<chop>, chop( LIST ), chop, chown LIST X<chown> X<owner> X<user> X<group>, chr NUMBER X<chr> X<character> X<ASCII> X<Unicode>, chr, chroot FILENAME X<chroot> X<root>, chroot, close FILEHANDLE X<close>, close, closedir DIRHANDLE X<closedir>, connect SOCKET,NAME X<connect>, continue BLOCK X<continue>, continue, cos EXPR X<cos> X<cosine> X<acos> X<arccosine>, cos, crypt PLAINTEXT,SALT X<crypt> X<digest> X<hash> X<salt> X<plaintext> X<password> X<decrypt> X<cryptography> X<passwd> X<encrypt>, dbmclose HASH X<dbmclose>, dbmopen HASH,DBNAME,MASK X<dbmopen> X<dbm> X<ndbm> X<sdbm> X<gdbm>, defined EXPR X<defined> X<undef> X<undefined>, defined, delete EXPR X<delete>, die LIST X<die> X<throw> X<exception> X<raise> X<$@> X<abort>, do BLOCK X<do> X<block>, do EXPR X<do>, dump LABEL X<dump> X<core> X<undump>, dump EXPR, dump, each HASH X<each> X<hash, iterator>, each ARRAY X<array, iterator>, eof FILEHANDLE X<eof> X<end of file> X<end-of-file>, eof (), eof, eval EXPR X<eval> X<try> X<catch> X<evaluate> X<parse> X<execute> X<error, handling> X<exception, handling>, eval BLOCK, eval, String eval, Under the L<C<"unicode_eval"> feature|feature/The 'unicode_eval' and 'evalbytes' features>, Outside the C<"unicode_eval"> feature, Block eval, evalbytes EXPR X<evalbytes>, evalbytes, exec LIST X<exec> X<execute>, exec PROGRAM LIST, exists EXPR X<exists> X<autovivification>, exit EXPR X<exit> X<terminate> X<abort>, exit, exp EXPR X<exp> X<exponential> X<antilog> X<antilogarithm> X<e>, exp, fc EXPR X<fc> X<foldcase> X<casefold> X<fold-case> X<case-fold>, fc, fcntl FILEHANDLE,FUNCTION,SCALAR X<fcntl>, __FILE__ X<__FILE__>, fileno FILEHANDLE X<fileno>, fileno DIRHANDLE, flock FILEHANDLE,OPERATION X<flock> X<lock> X<locking>, fork X<fork> X<child> X<parent>, format X<format>, formline PICTURE,LIST X<formline>, getc FILEHANDLE X<getc> X<getchar> X<character> X<file, read>, getc, getlogin X<getlogin> X<login>, getpeername SOCKET X<getpeername> X<peer>, getpgrp PID X<getpgrp> X<group>, getppid X<getppid> X<parent> X<pid>, getpriority WHICH,WHO X<getpriority> X<priority> X<nice>, getpwnam NAME X<getpwnam> X<getgrnam> X<gethostbyname> X<getnetbyname> X<getprotobyname> X<getpwuid> X<getgrgid> X<getservbyname> X<gethostbyaddr> X<getnetbyaddr> X<getprotobynumber> X<getservbyport> X<getpwent> X<getgrent> X<gethostent> X<getnetent> X<getprotoent> X<getservent> X<setpwent> X<setgrent> X<sethostent> X<setnetent> X<setprotoent> X<setservent> X<endpwent> X<endgrent> X<endhostent> X<endnetent> X<endprotoent> X<endservent>, getgrnam NAME, gethostbyname NAME, getnetbyname NAME, getprotobyname NAME, getpwuid UID, getgrgid GID, getservbyname NAME,PROTO, gethostbyaddr ADDR,ADDRTYPE, getnetbyaddr ADDR,ADDRTYPE, getprotobynumber NUMBER, getservbyport PORT,PROTO, getpwent, getgrent, gethostent, getnetent, getprotoent, getservent, setpwent, setgrent, sethostent STAYOPEN, setnetent STAYOPEN, setprotoent STAYOPEN, setservent STAYOPEN, endpwent, endgrent, endhostent, endnetent, endprotoent, endservent, getsockname SOCKET X<getsockname>, getsockopt SOCKET,LEVEL,OPTNAME X<getsockopt>, glob EXPR X<glob> X<wildcard> X<filename, expansion> X<expand>, glob, gmtime EXPR X<gmtime> X<UTC> X<Greenwich>, gmtime, goto LABEL X<goto> X<jump> X<jmp>, goto EXPR, goto &NAME, grep BLOCK LIST X<grep>, grep EXPR,LIST, hex EXPR X<hex> X<hexadecimal>, hex, import LIST X<import>, index STR,SUBSTR,POSITION X<index> X<indexOf> X<InStr>, index STR,SUBSTR, int EXPR X<int> X<integer> X<truncate> X<trunc> X<floor>, int, ioctl FILEHANDLE,FUNCTION,SCALAR X<ioctl>, join EXPR,LIST X<join>, keys HASH X<keys> X<key>, keys ARRAY, kill SIGNAL, LIST, kill SIGNAL X<kill> X<signal>, last LABEL X<last> X<break>, last EXPR, last, lc EXPR X<lc> X<lowercase>, lc, If C<use bytes> is in effect:, Otherwise, if C<use locale> for C<LC_CTYPE> is in effect:, Otherwise, If EXPR has the UTF8 flag set:, Otherwise, if C<use feature 'unicode_strings'> or C<use locale ':not_characters'> is in effect:, Otherwise:, lcfirst EXPR X<lcfirst> X<lowercase>, lcfirst, length EXPR X<length> X<size>, length, __LINE__ X<__LINE__>, link OLDFILE,NEWFILE X<link>, listen SOCKET,QUEUESIZE X<listen>, local EXPR X<local>, localtime EXPR X<localtime> X<ctime>, localtime, lock THING X<lock>, log EXPR X<log> X<logarithm> X<e> X<ln> X<base>, log, lstat FILEHANDLE X<lstat>, lstat EXPR, lstat DIRHANDLE, lstat, m//, map BLOCK LIST X<map>, map EXPR,LIST, mkdir FILENAME,MODE X<mkdir> X<md> X<directory, create>, mkdir FILENAME, mkdir, msgctl ID,CMD,ARG X<msgctl>, msgget KEY,FLAGS X<msgget>, msgrcv ID,VAR,SIZE,TYPE,FLAGS X<msgrcv>, msgsnd ID,MSG,FLAGS X<msgsnd>, my VARLIST X<my>, my TYPE VARLIST, my VARLIST : ATTRS, my TYPE VARLIST : ATTRS, next LABEL X<next> X<continue>, next EXPR, next, no MODULE VERSION LIST X<no declarations> X<unimporting>, no MODULE VERSION, no MODULE LIST, no MODULE, no VERSION, oct EXPR X<oct> X<octal> X<hex> X<hexadecimal> X<binary> X<bin>, oct, open FILEHANDLE,MODE,EXPR X<open> X<pipe> X<file, open> X<fopen>, open FILEHANDLE,MODE,EXPR,LIST, open FILEHANDLE,MODE,REFERENCE, open FILEHANDLE,EXPR, open FILEHANDLE, Working with files, Simple examples, About filehandles, About modes, Checking the return value, Specifying I/O layers in MODE, Using C<undef> for temporary files, Opening a filehandle into an in-memory scalar, Opening a filehandle into a command, Duping filehandles, Legacy usage, Specifying mode and filename as a single argument, Calling C<open> with one argument via global variables, Assigning a filehandle to a bareword, Other considerations, Automatic filehandle closure, Automatic pipe flushing, Direct versus by-reference assignment of filehandles, Whitespace and special characters in the filename argument, Invoking C-style C<open>, Portability issues, opendir DIRHANDLE,EXPR X<opendir>, ord EXPR X<ord> X<encoding>, ord, our VARLIST X<our> X<global>, our TYPE VARLIST, our VARLIST : ATTRS, our TYPE VARLIST : ATTRS, pack TEMPLATE,LIST X<pack>, package NAMESPACE, package NAMESPACE VERSION X<package> X<module> X<namespace> X<version>, package NAMESPACE BLOCK, package NAMESPACE VERSION BLOCK X<package> X<module> X<namespace> X<version>, __PACKAGE__ X<__PACKAGE__>, pipe READHANDLE,WRITEHANDLE X<pipe>, pop ARRAY X<pop> X<stack>, pop, pos SCALAR X<pos> X<match, position>, pos, print FILEHANDLE LIST X<print>, print FILEHANDLE, print LIST, print, printf FILEHANDLE FORMAT, LIST X<printf>, printf FILEHANDLE, printf FORMAT, LIST, printf, prototype FUNCTION X<prototype>, prototype, push ARRAY,LIST X<push> X<stack>, q/STRING/, qq/STRING/, qw/STRING/, qx/STRING/, qr/STRING/, quotemeta EXPR X<quotemeta> X<metacharacter>, quotemeta, rand EXPR X<rand> X<random>, rand, read FILEHANDLE,SCALAR,LENGTH,OFFSET X<read> X<file, read>, read FILEHANDLE,SCALAR,LENGTH, readdir DIRHANDLE X<readdir>, readline EXPR, readline X<readline> X<gets> X<fgets>, readlink EXPR X<readlink>, readlink, readpipe EXPR, readpipe X<readpipe>, recv SOCKET,SCALAR,LENGTH,FLAGS X<recv>, redo LABEL X<redo>, redo EXPR, redo, ref EXPR X<ref> X<reference>, ref, rename OLDNAME,NEWNAME X<rename> X<move> X<mv> X<ren>, require VERSION X<require>, require EXPR, require, reset EXPR X<reset>, reset, return EXPR X<return>, return, reverse LIST X<reverse> X<rev> X<invert>, rewinddir DIRHANDLE X<rewinddir>, rindex STR,SUBSTR,POSITION X<rindex>, rindex STR,SUBSTR, rmdir FILENAME X<rmdir> X<rd> X<directory, remove>, rmdir, s///, say FILEHANDLE LIST X<say>, say FILEHANDLE, say LIST, say, scalar EXPR X<scalar> X<context>, seek FILEHANDLE,POSITION,WHENCE X<seek> X<fseek> X<filehandle, position>, seekdir DIRHANDLE,POS X<seekdir>, select FILEHANDLE X<select> X<filehandle, default>, select, select RBITS,WBITS,EBITS,TIMEOUT X<select>, semctl ID,SEMNUM,CMD,ARG X<semctl>, semget KEY,NSEMS,FLAGS X<semget>, semop KEY,OPSTRING X<semop>, send SOCKET,MSG,FLAGS,TO X<send>, send SOCKET,MSG,FLAGS, setpgrp PID,PGRP X<setpgrp> X<group>, setpriority WHICH,WHO,PRIORITY X<setpriority> X<priority> X<nice> X<renice>, setsockopt SOCKET,LEVEL,OPTNAME,OPTVAL X<setsockopt>, shift ARRAY X<shift>, shift, shmctl ID,CMD,ARG X<shmctl>, shmget KEY,SIZE,FLAGS X<shmget>, shmread ID,VAR,POS,SIZE X<shmread> X<shmwrite>, shmwrite ID,STRING,POS,SIZE, shutdown SOCKET,HOW X<shutdown>, sin EXPR X<sin> X<sine> X<asin> X<arcsine>, sin, sleep EXPR X<sleep> X<pause>, sleep, socket SOCKET,DOMAIN,TYPE,PROTOCOL X<socket>, socketpair SOCKET1,SOCKET2,DOMAIN,TYPE,PROTOCOL X<socketpair>, sort SUBNAME LIST X<sort>, sort BLOCK LIST, sort LIST, splice ARRAY,OFFSET,LENGTH,LIST X<splice>, splice ARRAY,OFFSET,LENGTH, splice ARRAY,OFFSET, splice ARRAY, split /PATTERN/,EXPR,LIMIT X<split>, split /PATTERN/,EXPR, split /PATTERN/, split, sprintf FORMAT, LIST X<sprintf>, format parameter index, flags, vector flag, (minimum) width, precision, or maximum width X<precision>, size, order of arguments, sqrt EXPR X<sqrt> X<root> X<square root>, sqrt, srand EXPR X<srand> X<seed> X<randseed>, srand, stat FILEHANDLE X<stat> X<file, status> X<ctime>, stat EXPR, stat DIRHANDLE, stat, state VARLIST X<state>, state TYPE VARLIST, state VARLIST : ATTRS, state TYPE VARLIST : ATTRS, study SCALAR X<study>, study, sub NAME BLOCK X<sub>, sub NAME (PROTO) BLOCK, sub NAME : ATTRS BLOCK, sub NAME (PROTO) : ATTRS BLOCK, __SUB__ X<__SUB__>, substr EXPR,OFFSET,LENGTH,REPLACEMENT X<substr> X<substring> X<mid> X<left> X<right>, substr EXPR,OFFSET,LENGTH, substr EXPR,OFFSET, symlink OLDFILE,NEWFILE X<symlink> X<link> X<symbolic link> X<link, symbolic>, syscall NUMBER, LIST X<syscall> X<system call>, sysopen FILEHANDLE,FILENAME,MODE X<sysopen>, sysopen FILEHANDLE,FILENAME,MODE,PERMS, sysread FILEHANDLE,SCALAR,LENGTH,OFFSET X<sysread>, sysread FILEHANDLE,SCALAR,LENGTH, sysseek FILEHANDLE,POSITION,WHENCE X<sysseek> X<lseek>, system LIST X<system> X<shell>, system PROGRAM LIST, syswrite FILEHANDLE,SCALAR,LENGTH,OFFSET X<syswrite>, syswrite FILEHANDLE,SCALAR,LENGTH, syswrite FILEHANDLE,SCALAR, tell FILEHANDLE X<tell>, tell, telldir DIRHANDLE X<telldir>, tie VARIABLE,CLASSNAME,LIST X<tie>, tied VARIABLE X<tied>, time X<time> X<epoch>, times X<times>, tr///, truncate FILEHANDLE,LENGTH X<truncate>, truncate EXPR,LENGTH, uc EXPR X<uc> X<uppercase> X<toupper>, uc, ucfirst EXPR X<ucfirst> X<uppercase>, ucfirst, umask EXPR X<umask>, umask, undef EXPR X<undef> X<undefine>, undef, unlink LIST X<unlink> X<delete> X<remove> X<rm> X<del>, unlink, unpack TEMPLATE,EXPR X<unpack>, unpack TEMPLATE, unshift ARRAY,LIST X<unshift>, untie VARIABLE X<untie>, use Module VERSION LIST X<use> X<module> X<import>, use Module VERSION, use Module LIST, use Module, use VERSION, utime LIST X<utime>, values HASH X<values>, values ARRAY, vec EXPR,OFFSET,BITS X<vec> X<bit> X<bit vector>, wait X<wait>, waitpid PID,FLAGS X<waitpid>, wantarray X<wantarray> X<context>, warn LIST X<warn> X<warning> X<STDERR>, write FILEHANDLE X<write>, write EXPR, write, y/// =item Non-function Keywords by Cross-reference __DATA__, __END__, BEGIN, CHECK, END, INIT, UNITCHECK, DESTROY, and, cmp, eq, ge, gt, le, lt, ne, not, or, x, xor, AUTOLOAD, else, elsif, for, foreach, if, unless, until, while, elseif, default, given, when =back =back =head2 perlopentut - simple recipes for opening files and pipes in Perl =over 4 =item DESCRIPTION I<OK>, I<HANDLE>, I<MODE>, I<PATHNAME> =item Opening Text Files =over 4 =item Opening Text Files for Reading =item Opening Text Files for Writing =back =item Opening Binary Files =item Opening Pipes =over 4 =item Opening a pipe for reading =item Opening a pipe for writing =item Expressing the command as a list =back =item SEE ALSO =item AUTHOR and COPYRIGHT =back =head2 perlpacktut - tutorial on C<pack> and C<unpack> =over 4 =item DESCRIPTION =item The Basic Principle =item Packing Text =item Packing Numbers =over 4 =item Integers =item Unpacking a Stack Frame =item How to Eat an Egg on a Net =item Byte-order modifiers =item Floating point Numbers =back =item Exotic Templates =over 4 =item Bit Strings =item Uuencoding =item Doing Sums =item Unicode =item Another Portable Binary Encoding =back =item Template Grouping =item Lengths and Widths =over 4 =item String Lengths =item Dynamic Templates =item Counting Repetitions =item Intel HEX =back =item Packing and Unpacking C Structures =over 4 =item The Alignment Pit =item Dealing with Endian-ness =item Alignment, Take 2 =item Alignment, Take 3 =item Pointers for How to Use Them =back =item Pack Recipes =item Funnies Section =item Authors =back =head2 perlpod - the Plain Old Documentation format =over 4 =item DESCRIPTION =over 4 =item Ordinary Paragraph X<POD, ordinary paragraph> =item Verbatim Paragraph X<POD, verbatim paragraph> X<verbatim> =item Command Paragraph X<POD, command> C<=head1 I<Heading Text>> X<=head1> X<=head2> X<=head3> X<=head4> X<head1> X<head2> X<head3> X<head4>, C<=head2 I<Heading Text>>, C<=head3 I<Heading Text>>, C<=head4 I<Heading Text>>, C<=over I<indentlevel>> X<=over> X<=item> X<=back> X<over> X<item> X<back>, C<=item I<stuff...>>, C<=back>, C<=cut> X<=cut> X<cut>, C<=pod> X<=pod> X<pod>, C<=begin I<formatname>> X<=begin> X<=end> X<=for> X<begin> X<end> X<for>, C<=end I<formatname>>, C<=for I<formatname> I<text...>>, C<=encoding I<encodingname>> X<=encoding> X<encoding> =item Formatting Codes X<POD, formatting code> X<formatting code> X<POD, interior sequence> X<interior sequence> C<IE<lt>textE<gt>> -- italic text X<I> X<< IZ<><> >> X<POD, formatting code, italic> X<italic>, C<BE<lt>textE<gt>> -- bold text X<B> X<< BZ<><> >> X<POD, formatting code, bold> X<bold>, C<CE<lt>codeE<gt>> -- code text X<C> X<< CZ<><> >> X<POD, formatting code, code> X<code>, C<LE<lt>nameE<gt>> -- a hyperlink X<L> X<< LZ<><> >> X<POD, formatting code, hyperlink> X<hyperlink>, C<EE<lt>escapeE<gt>> -- a character escape X<E> X<< EZ<><> >> X<POD, formatting code, escape> X<escape>, C<FE<lt>filenameE<gt>> -- used for filenames X<F> X<< FZ<><> >> X<POD, formatting code, filename> X<filename>, C<SE<lt>textE<gt>> -- text contains non-breaking spaces X<S> X<< SZ<><> >> X<POD, formatting code, non-breaking space> X<non-breaking space>, C<XE<lt>topic nameE<gt>> -- an index entry X<X> X<< XZ<><> >> X<POD, formatting code, index entry> X<index entry>, C<ZE<lt>E<gt>> -- a null (zero-effect) formatting code X<Z> X<< ZZ<><> >> X<POD, formatting code, null> X<null> =item The Intent X<POD, intent of> =item Embedding Pods in Perl Modules X<POD, embedding> =item Hints for Writing Pod X<podchecker> X<POD, validating> =back =item SEE ALSO =item AUTHOR =back =head2 perlpodspec - Plain Old Documentation: format specification and notes =over 4 =item DESCRIPTION =item Pod Definitions =item Pod Commands "=head1", "=head2", "=head3", "=head4", "=pod", "=cut", "=over", "=item", "=back", "=begin formatname", "=begin formatname parameter", "=end formatname", "=for formatname text...", "=encoding encodingname" =item Pod Formatting Codes C<IE<lt>textE<gt>> -- italic text, C<BE<lt>textE<gt>> -- bold text, C<CE<lt>codeE<gt>> -- code text, C<FE<lt>filenameE<gt>> -- style for filenames, C<XE<lt>topic nameE<gt>> -- an index entry, C<ZE<lt>E<gt>> -- a null (zero-effect) formatting code, C<LE<lt>nameE<gt>> -- a hyperlink, C<EE<lt>escapeE<gt>> -- a character escape, C<SE<lt>textE<gt>> -- text contains non-breaking spaces =item Notes on Implementing Pod Processors =item About LE<lt>...E<gt> Codes First:, Second:, Third:, Fourth:, Fifth:, Sixth: =item About =over...=back Regions =item About Data Paragraphs and "=begin/=end" Regions =item SEE ALSO =item AUTHOR =back =head2 perlpodstyle - Perl POD style guide =over 4 =item DESCRIPTION NAME, SYNOPSIS, DESCRIPTION, OPTIONS, RETURN VALUE, ERRORS, DIAGNOSTICS, EXAMPLES, ENVIRONMENT, FILES, CAVEATS, BUGS, RESTRICTIONS, NOTES, AUTHOR, HISTORY, COPYRIGHT AND LICENSE, SEE ALSO =item AUTHOR =item COPYRIGHT AND LICENSE =item SEE ALSO =back =head2 perldiag - various Perl diagnostics =over 4 =item DESCRIPTION =item SEE ALSO =back =head2 perldeprecation - list Perl deprecations =over 4 =item DESCRIPTION =over 4 =item Perl 5.34 =item Perl 5.32 =item Perl 5.30 =item Perl 5.28 =item Perl 5.26 =item Perl 5.24 =item Perl 5.16 =back =item SEE ALSO =back =head2 perllexwarn - Perl Lexical Warnings =over 4 =item DESCRIPTION =back =head2 perldebug - Perl debugging =over 4 =item DESCRIPTION =item The Perl Debugger =over 4 =item Calling the Debugger perl -d program_name, perl -d -e 0, perl -d:ptkdb program_name, perl -dt threaded_program_name =item Debugger Commands h X<debugger command, h>, h [command], h h, p expr X<debugger command, p>, x [maxdepth] expr X<debugger command, x>, V [pkg [vars]] X<debugger command, V>, X [vars] X<debugger command, X>, y [level [vars]] X<debugger command, y>, T X<debugger command, T> X<backtrace> X<stack, backtrace>, s [expr] X<debugger command, s> X<step>, n [expr] X<debugger command, n>, r X<debugger command, r>, <CR>, c [line|sub] X<debugger command, c>, l X<debugger command, l>, l min+incr, l min-max, l line, l subname, - X<debugger command, ->, v [line] X<debugger command, v>, . X<debugger command, .>, f filename X<debugger command, f>, /pattern/, ?pattern?, L [abw] X<debugger command, L>, S [[!]regex] X<debugger command, S>, t [n] X<debugger command, t>, t [n] expr X<debugger command, t>, b X<breakpoint> X<debugger command, b>, b [line] [condition] X<breakpoint> X<debugger command, b>, b [file]:[line] [condition] X<breakpoint> X<debugger command, b>, b subname [condition] X<breakpoint> X<debugger command, b>, b postpone subname [condition] X<breakpoint> X<debugger command, b>, b load filename X<breakpoint> X<debugger command, b>, b compile subname X<breakpoint> X<debugger command, b>, B line X<breakpoint> X<debugger command, B>, B * X<breakpoint> X<debugger command, B>, disable [file]:[line] X<breakpoint> X<debugger command, disable> X<disable>, disable [line] X<breakpoint> X<debugger command, disable> X<disable>, enable [file]:[line] X<breakpoint> X<debugger command, disable> X<disable>, enable [line] X<breakpoint> X<debugger command, disable> X<disable>, a [line] command X<debugger command, a>, A line X<debugger command, A>, A * X<debugger command, A>, w expr X<debugger command, w>, W expr X<debugger command, W>, W * X<debugger command, W>, o X<debugger command, o>, o booloption ... X<debugger command, o>, o anyoption? ... X<debugger command, o>, o option=value ... X<debugger command, o>, < ? X<< debugger command, < >>, < [ command ] X<< debugger command, < >>, < * X<< debugger command, < >>, << command X<< debugger command, << >>, > ? X<< debugger command, > >>, > command X<< debugger command, > >>, > * X<< debugger command, > >>, >> command X<<< debugger command, >> >>>, { ? X<debugger command, {>, { [ command ], { * X<debugger command, {>, {{ command X<debugger command, {{>, ! number X<debugger command, !>, ! -number X<debugger command, !>, ! pattern X<debugger command, !>, !! cmd X<debugger command, !!>, source file X<debugger command, source>, H -number X<debugger command, H>, q or ^D X<debugger command, q> X<debugger command, ^D>, R X<debugger command, R>, |dbcmd X<debugger command, |>, ||dbcmd X<debugger command, ||>, command, m expr X<debugger command, m>, M X<debugger command, M>, man [manpage] X<debugger command, man> =item Configurable Options C<recallCommand>, C<ShellBang> X<debugger option, recallCommand> X<debugger option, ShellBang>, C<pager> X<debugger option, pager>, C<tkRunning> X<debugger option, tkRunning>, C<signalLevel>, C<warnLevel>, C<dieLevel> X<debugger option, signalLevel> X<debugger option, warnLevel> X<debugger option, dieLevel>, C<AutoTrace> X<debugger option, AutoTrace>, C<LineInfo> X<debugger option, LineInfo>, C<inhibit_exit> X<debugger option, inhibit_exit>, C<PrintRet> X<debugger option, PrintRet>, C<ornaments> X<debugger option, ornaments>, C<frame> X<debugger option, frame>, C<maxTraceLen> X<debugger option, maxTraceLen>, C<windowSize> X<debugger option, windowSize>, C<arrayDepth>, C<hashDepth> X<debugger option, arrayDepth> X<debugger option, hashDepth>, C<dumpDepth> X<debugger option, dumpDepth>, C<compactDump>, C<veryCompact> X<debugger option, compactDump> X<debugger option, veryCompact>, C<globPrint> X<debugger option, globPrint>, C<DumpDBFiles> X<debugger option, DumpDBFiles>, C<DumpPackages> X<debugger option, DumpPackages>, C<DumpReused> X<debugger option, DumpReused>, C<quote>, C<HighBit>, C<undefPrint> X<debugger option, quote> X<debugger option, HighBit> X<debugger option, undefPrint>, C<UsageOnly> X<debugger option, UsageOnly>, C<HistFile> X<debugger option, history, HistFile>, C<HistSize> X<debugger option, history, HistSize>, C<TTY> X<debugger option, TTY>, C<noTTY> X<debugger option, noTTY>, C<ReadLine> X<debugger option, ReadLine>, C<NonStop> X<debugger option, NonStop> =item Debugger Input/Output Prompt, Multiline commands, Stack backtrace X<backtrace> X<stack, backtrace>, Line Listing Format, Frame listing =item Debugging Compile-Time Statements =item Debugger Customization =item Readline Support / History in the Debugger =item Editor Support for Debugging =item The Perl Profiler X<profile> X<profiling> X<profiler> =back =item Debugging Regular Expressions X<regular expression, debugging> X<regex, debugging> X<regexp, debugging> =item Debugging Memory Usage X<memory usage> =item SEE ALSO =item BUGS =back =head2 perlvar - Perl predefined variables =over 4 =item DESCRIPTION =over 4 =item The Syntax of Variable Names =back =item SPECIAL VARIABLES =over 4 =item General Variables $ARG, $_ X<$_> X<$ARG>, @ARG, @_ X<@_> X<@ARG>, $LIST_SEPARATOR, $" X<$"> X<$LIST_SEPARATOR>, $PROCESS_ID, $PID, $$ X<$$> X<$PID> X<$PROCESS_ID>, $PROGRAM_NAME, $0 X<$0> X<$PROGRAM_NAME>, $REAL_GROUP_ID, $GID, $( X<$(> X<$GID> X<$REAL_GROUP_ID>, $EFFECTIVE_GROUP_ID, $EGID, $) X<$)> X<$EGID> X<$EFFECTIVE_GROUP_ID>, $REAL_USER_ID, $UID, $< X<< $< >> X<$UID> X<$REAL_USER_ID>, $EFFECTIVE_USER_ID, $EUID, $> X<< $> >> X<$EUID> X<$EFFECTIVE_USER_ID>, $SUBSCRIPT_SEPARATOR, $SUBSEP, $; X<$;> X<$SUBSEP> X<SUBSCRIPT_SEPARATOR>, $a, $b X<$a> X<$b>, %ENV X<%ENV>, $OLD_PERL_VERSION, $] X<$]> X<$OLD_PERL_VERSION>, $SYSTEM_FD_MAX, $^F X<$^F> X<$SYSTEM_FD_MAX>, @F X<@F>, @INC X<@INC>, %INC X<%INC>, $INPLACE_EDIT, $^I X<$^I> X<$INPLACE_EDIT>, @ISA X<@ISA>, $^M X<$^M>, $OSNAME, $^O X<$^O> X<$OSNAME>, %SIG X<%SIG>, $BASETIME, $^T X<$^T> X<$BASETIME>, $PERL_VERSION, $^V X<$^V> X<$PERL_VERSION>, ${^WIN32_SLOPPY_STAT} X<${^WIN32_SLOPPY_STAT}> X<sitecustomize> X<sitecustomize.pl>, $EXECUTABLE_NAME, $^X X<$^X> X<$EXECUTABLE_NAME> =item Variables related to regular expressions $<I<digits>> ($1, $2, ...) X<$1> X<$2> X<$3> X<$I<digits>>, @{^CAPTURE} X<@{^CAPTURE}> X<@^CAPTURE>, $MATCH, $& X<$&> X<$MATCH>, ${^MATCH} X<${^MATCH}>, $PREMATCH, $` X<$`> X<$PREMATCH> X<${^PREMATCH}>, ${^PREMATCH} X<$`> X<${^PREMATCH}>, $POSTMATCH, $' X<$'> X<$POSTMATCH> X<${^POSTMATCH}> X<@->, ${^POSTMATCH} X<${^POSTMATCH}> X<$'> X<$POSTMATCH>, $LAST_PAREN_MATCH, $+ X<$+> X<$LAST_PAREN_MATCH>, $LAST_SUBMATCH_RESULT, $^N X<$^N> X<$LAST_SUBMATCH_RESULT>, @LAST_MATCH_END, @+ X<@+> X<@LAST_MATCH_END>, %{^CAPTURE}, %LAST_PAREN_MATCH, %+ X<%+> X<%LAST_PAREN_MATCH> X<%{^CAPTURE}>, @LAST_MATCH_START, @- X<@-> X<@LAST_MATCH_START>, C<$`> is the same as C<substr($var, 0, $-[0])>, C<$&> is the same as C<substr($var, $-[0], $+[0] - $-[0])>, C<$'> is the same as C<substr($var, $+[0])>, C<$1> is the same as C<substr($var, $-[1], $+[1] - $-[1])>, C<$2> is the same as C<substr($var, $-[2], $+[2] - $-[2])>, C<$3> is the same as C<substr($var, $-[3], $+[3] - $-[3])>, %{^CAPTURE_ALL} X<%{^CAPTURE_ALL}>, %- X<%->, $LAST_REGEXP_CODE_RESULT, $^R X<$^R> X<$LAST_REGEXP_CODE_RESULT>, ${^RE_COMPILE_RECURSION_LIMIT} X<${^RE_COMPILE_RECURSION_LIMIT}>, ${^RE_DEBUG_FLAGS} X<${^RE_DEBUG_FLAGS}>, ${^RE_TRIE_MAXBUF} X<${^RE_TRIE_MAXBUF}> =item Variables related to filehandles $ARGV X<$ARGV>, @ARGV X<@ARGV>, ARGV X<ARGV>, ARGVOUT X<ARGVOUT>, IO::Handle->output_field_separator( EXPR ), $OUTPUT_FIELD_SEPARATOR, $OFS, $, X<$,> X<$OFS> X<$OUTPUT_FIELD_SEPARATOR>, HANDLE->input_line_number( EXPR ), $INPUT_LINE_NUMBER, $NR, $. X<$.> X<$NR> X<$INPUT_LINE_NUMBER> X<line number>, IO::Handle->input_record_separator( EXPR ), $INPUT_RECORD_SEPARATOR, $RS, $/ X<$/> X<$RS> X<$INPUT_RECORD_SEPARATOR>, IO::Handle->output_record_separator( EXPR ), $OUTPUT_RECORD_SEPARATOR, $ORS, $\ X<$\> X<$ORS> X<$OUTPUT_RECORD_SEPARATOR>, HANDLE->autoflush( EXPR ), $OUTPUT_AUTOFLUSH, $| X<$|> X<autoflush> X<flush> X<$OUTPUT_AUTOFLUSH>, ${^LAST_FH} X<${^LAST_FH}>, $ACCUMULATOR, $^A X<$^A> X<$ACCUMULATOR>, IO::Handle->format_formfeed(EXPR), $FORMAT_FORMFEED, $^L X<$^L> X<$FORMAT_FORMFEED>, HANDLE->format_page_number(EXPR), $FORMAT_PAGE_NUMBER, $% X<$%> X<$FORMAT_PAGE_NUMBER>, HANDLE->format_lines_left(EXPR), $FORMAT_LINES_LEFT, $- X<$-> X<$FORMAT_LINES_LEFT>, IO::Handle->format_line_break_characters EXPR, $FORMAT_LINE_BREAK_CHARACTERS, $: X<$:> X<FORMAT_LINE_BREAK_CHARACTERS>, HANDLE->format_lines_per_page(EXPR), $FORMAT_LINES_PER_PAGE, $= X<$=> X<$FORMAT_LINES_PER_PAGE>, HANDLE->format_top_name(EXPR), $FORMAT_TOP_NAME, $^ X<$^> X<$FORMAT_TOP_NAME>, HANDLE->format_name(EXPR), $FORMAT_NAME, $~ X<$~> X<$FORMAT_NAME> =item Error Variables X<error> X<exception> ${^CHILD_ERROR_NATIVE} X<$^CHILD_ERROR_NATIVE>, $EXTENDED_OS_ERROR, $^E X<$^E> X<$EXTENDED_OS_ERROR>, $EXCEPTIONS_BEING_CAUGHT, $^S X<$^S> X<$EXCEPTIONS_BEING_CAUGHT>, $WARNING, $^W X<$^W> X<$WARNING>, ${^WARNING_BITS} X<${^WARNING_BITS}>, $OS_ERROR, $ERRNO, $! X<$!> X<$ERRNO> X<$OS_ERROR>, %OS_ERROR, %ERRNO, %! X<%!> X<%OS_ERROR> X<%ERRNO>, $CHILD_ERROR, $? X<$?> X<$CHILD_ERROR>, $EVAL_ERROR, $@ X<$@> X<$EVAL_ERROR> =item Variables related to the interpreter state $COMPILING, $^C X<$^C> X<$COMPILING>, $DEBUGGING, $^D X<$^D> X<$DEBUGGING>, ${^ENCODING} X<${^ENCODING}>, ${^GLOBAL_PHASE} X<${^GLOBAL_PHASE}>, CONSTRUCT, START, CHECK, INIT, RUN, END, DESTRUCT, $^H X<$^H>, %^H X<%^H>, ${^OPEN} X<${^OPEN}>, $PERLDB, $^P X<$^P> X<$PERLDB>, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x100, 0x200, 0x400, 0x800, 0x1000, ${^TAINT} X<${^TAINT}>, ${^SAFE_LOCALES} X<${^SAFE_LOCALES}>, ${^UNICODE} X<${^UNICODE}>, ${^UTF8CACHE} X<${^UTF8CACHE}>, ${^UTF8LOCALE} X<${^UTF8LOCALE}> =item Deprecated and removed variables $# X<$#>, $* X<$*>, $[ X<$[> =back =back =head2 perlre - Perl regular expressions =over 4 =item DESCRIPTION =over 4 =item The Basics X<regular expression, version 8> X<regex, version 8> X<regexp, version 8> =item Modifiers B<C<m>> X</m> X<regex, multiline> X<regexp, multiline> X<regular expression, multiline>, B<C<s>> X</s> X<regex, single-line> X<regexp, single-line> X<regular expression, single-line>, B<C<i>> X</i> X<regex, case-insensitive> X<regexp, case-insensitive> X<regular expression, case-insensitive>, B<C<x>> and B<C<xx>> X</x>, B<C<p>> X</p> X<regex, preserve> X<regexp, preserve>, B<C<a>>, B<C<d>>, B<C<l>>, and B<C<u>> X</a> X</d> X</l> X</u>, B<C<n>> X</n> X<regex, non-capture> X<regexp, non-capture> X<regular expression, non-capture>, Other Modifiers =item Regular Expressions [1], [2], [3], [4], [5], [6], [7], [8] =item Quoting metacharacters =item Extended Patterns C<(?#I<text>)> X<(?#)>, C<(?adlupimnsx-imnsx)>, C<(?^alupimnsx)> X<(?)> X<(?^)>, C<(?:I<pattern>)> X<(?:)>, C<(?adluimnsx-imnsx:I<pattern>)>, C<(?^aluimnsx:I<pattern>)> X<(?^:)>, C<(?|I<pattern>)> X<(?|)> X<Branch reset>, Lookaround Assertions X<look-around assertion> X<lookaround assertion> X<look-around> X<lookaround>, C<(?=I<pattern>)>, C<(*pla:I<pattern>)>, C<(*positive_lookahead:I<pattern>)> X<(?=)> X<(*pla> X<(*positive_lookahead> X<look-ahead, positive> X<lookahead, positive>, C<(?!I<pattern>)>, C<(*nla:I<pattern>)>, C<(*negative_lookahead:I<pattern>)> X<(?!)> X<(*nla> X<(*negative_lookahead> X<look-ahead, negative> X<lookahead, negative>, C<(?<=I<pattern>)>, C<\K>, C<(*plb:I<pattern>)>, C<(*positive_lookbehind:I<pattern>)> X<(?<=)> X<(*plb> X<(*positive_lookbehind> X<look-behind, positive> X<lookbehind, positive> X<\K>, C<(?<!I<pattern>)>, C<(*nlb:I<pattern>)>, C<(*negative_lookbehind:I<pattern>)> X<(?<!)> X<(*nlb> X<(*negative_lookbehind> X<look-behind, negative> X<lookbehind, negative>, C<< (?<I<NAME>>I<pattern>) >>, C<(?'I<NAME>'I<pattern>)> X<< (?<NAME>) >> X<(?'NAME')> X<named capture> X<capture>, C<< \k<I<NAME>> >>, C<< \k'I<NAME>' >>, C<(?{ I<code> })> X<(?{})> X<regex, code in> X<regexp, code in> X<regular expression, code in>, C<(??{ I<code> })> X<(??{})> X<regex, postponed> X<regexp, postponed> X<regular expression, postponed>, C<(?I<PARNO>)> C<(?-I<PARNO>)> C<(?+I<PARNO>)> C<(?R)> C<(?0)> X<(?PARNO)> X<(?1)> X<(?R)> X<(?0)> X<(?-1)> X<(?+1)> X<(?-PARNO)> X<(?+PARNO)> X<regex, recursive> X<regexp, recursive> X<regular expression, recursive> X<regex, relative recursion> X<GOSUB> X<GOSTART>, C<(?&I<NAME>)> X<(?&NAME)>, C<(?(I<condition>)I<yes-pattern>|I<no-pattern>)> X<(?()>, C<(?(I<condition>)I<yes-pattern>)>, an integer in parentheses, a lookahead/lookbehind/evaluate zero-width assertion;, a name in angle brackets or single quotes, the special symbol C<(R)>, C<(1)> C<(2)> .., C<(E<lt>I<NAME>E<gt>)> C<('I<NAME>')>, C<(?=...)> C<(?!...)> C<(?<=...)> C<(?<!...)>, C<(?{ I<CODE> })>, C<(R)>, C<(R1)> C<(R2)> .., C<(R&I<NAME>)>, C<(DEFINE)>, C<< (?>I<pattern>) >>, C<< (*atomic:I<pattern>) >> X<(?E<gt>pattern)> X<(*atomic> X<backtrack> X<backtracking> X<atomic> X<possessive>, C<(?[ ])> =item Backtracking X<backtrack> X<backtracking> =item Script Runs X<(*script_run:...)> X<(sr:...)> X<(*atomic_script_run:...)> X<(asr:...)> =item Special Backtracking Control Verbs Verbs, C<(*PRUNE)> C<(*PRUNE:I<NAME>)> X<(*PRUNE)> X<(*PRUNE:NAME)>, C<(*SKIP)> C<(*SKIP:I<NAME>)> X<(*SKIP)>, C<(*MARK:I<NAME>)> C<(*:I<NAME>)> X<(*MARK)> X<(*MARK:NAME)> X<(*:NAME)>, C<(*THEN)> C<(*THEN:I<NAME>)>, C<(*COMMIT)> C<(*COMMIT:I<arg>)> X<(*COMMIT)>, C<(*FAIL)> C<(*F)> C<(*FAIL:I<arg>)> X<(*FAIL)> X<(*F)>, C<(*ACCEPT)> C<(*ACCEPT:I<arg>)> X<(*ACCEPT)> =item Warning on C<\1> Instead of C<$1> =item Repeated Patterns Matching a Zero-length Substring =item Combining RE Pieces C<ST>, C<S|T>, C<S{REPEAT_COUNT}>, C<S{min,max}>, C<S{min,max}?>, C<S?>, C<S*>, C<S+>, C<S??>, C<S*?>, C<S+?>, C<< (?>S) >>, C<(?=S)>, C<(?<=S)>, C<(?!S)>, C<(?<!S)>, C<(??{ I<EXPR> })>, C<(?I<PARNO>)>, C<(?(I<condition>)I<yes-pattern>|I<no-pattern>)> =item Creating Custom RE Engines =item Embedded Code Execution Frequency =item PCRE/Python Support C<< (?PE<lt>I<NAME>E<gt>I<pattern>) >>, C<< (?P=I<NAME>) >>, C<< (?P>I<NAME>) >> =back =item BUGS =item SEE ALSO =back =head2 perlrebackslash - Perl Regular Expression Backslash Sequences and Escapes =over 4 =item DESCRIPTION =over 4 =item The backslash [1] =item All the sequences and escapes =item Character Escapes [1], [2] =item Modifiers =item Character classes =item Referencing =item Assertions \A, \z, \Z, \G, \b{}, \b, \B{}, \B, C<\b{gcb}> or C<\b{g}>, C<\b{lb}>, C<\b{sb}>, C<\b{wb}> =item Misc \K, \N, \R X<\R>, \X X<\X> =back =back =head2 perlrecharclass - Perl Regular Expression Character Classes =over 4 =item DESCRIPTION =over 4 =item The dot =item Backslash sequences X<\w> X<\W> X<\s> X<\S> X<\d> X<\D> X<\p> X<\P> X<\N> X<\v> X<\V> X<\h> X<\H> X<word> X<whitespace> If the C</a> modifier is in effect .., otherwise .., For code points above 255 .., For code points below 256 .., if locale rules are in effect .., if, instead, Unicode rules are in effect .., otherwise .., If the C</a> modifier is in effect .., otherwise .., For code points above 255 .., For code points below 256 .., if locale rules are in effect .., if, instead, Unicode rules are in effect .., otherwise .., [1], [2] =item Bracketed Character Classes [1], [2], [3], [4], [5], [6], [7], If the C</a> modifier, is in effect .., otherwise .., For code points above 255 .., For code points below 256 .., if locale rules are in effect .., C<word>, C<ascii>, C<blank>, if, instead, Unicode rules are in effect .., otherwise .. =back =back =head2 perlreref - Perl Regular Expressions Reference =over 4 =item DESCRIPTION =over 4 =item OPERATORS =item SYNTAX =item ESCAPE SEQUENCES =item CHARACTER CLASSES =item ANCHORS =item QUANTIFIERS =item EXTENDED CONSTRUCTS =item VARIABLES =item FUNCTIONS =item TERMINOLOGY =back =item AUTHOR =item SEE ALSO =item THANKS =back =head2 perlref - Perl references and nested data structures =over 4 =item NOTE =item DESCRIPTION =over 4 =item Making References X<reference, creation> X<referencing> =item Using References X<reference, use> X<dereferencing> X<dereference> =item Circular References X<circular reference> X<reference, circular> =item Symbolic references X<reference, symbolic> X<reference, soft> X<symbolic reference> X<soft reference> =item Not-so-symbolic references =item Pseudo-hashes: Using an array as a hash X<pseudo-hash> X<pseudo hash> X<pseudohash> =item Function Templates X<scope, lexical> X<closure> X<lexical> X<lexical scope> X<subroutine, nested> X<sub, nested> X<subroutine, local> X<sub, local> =back =item WARNING: Don't use references as hash keys X<reference, string context> X<reference, use as hash key> =over 4 =item Postfix Dereference Syntax =item Postfix Reference Slicing =item Assigning to References =back =item Declaring a Reference to a Variable =item SEE ALSO =back =head2 perlform - Perl formats =over 4 =item DESCRIPTION =over 4 =item Text Fields X<format, text field> =item Numeric Fields X<#> X<format, numeric field> =item The Field @* for Variable-Width Multi-Line Text X<@*> =item The Field ^* for Variable-Width One-line-at-a-time Text X<^*> =item Specifying Values X<format, specifying values> =item Using Fill Mode X<format, fill mode> =item Suppressing Lines Where All Fields Are Void X<format, suppressing lines> =item Repeating Format Lines X<format, repeating lines> =item Top of Form Processing X<format, top of form> X<top> X<header> =item Format Variables X<format variables> X<format, variables> =back =item NOTES =over 4 =item Footers X<format, footer> X<footer> =item Accessing Formatting Internals X<format, internals> =back =item WARNINGS =back =head2 perlobj - Perl object reference =over 4 =item DESCRIPTION =over 4 =item An Object is Simply a Data Structure X<object> X<bless> X<constructor> X<new> =item A Class is Simply a Package X<class> X<package> X<@ISA> X<inheritance> =item A Method is Simply a Subroutine X<method> =item Method Invocation X<invocation> X<method> X<arrow> X<< -> >> =item Inheritance X<inheritance> =item Writing Constructors X<constructor> =item Attributes X<attribute> =item An Aside About Smarter and Safer Code =item Method Call Variations X<method> =item Invoking Class Methods X<invocation> =item C<bless>, C<blessed>, and C<ref> =item The UNIVERSAL Class X<UNIVERSAL> isa($class) X<isa>, DOES($role) X<DOES>, can($method) X<can>, VERSION($need) X<VERSION> =item AUTOLOAD X<AUTOLOAD> =item Destructors X<destructor> X<DESTROY> =item Non-Hash Objects =item Inside-Out objects =item Pseudo-hashes =back =item SEE ALSO =back =head2 perltie - how to hide an object class in a simple variable =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Tying Scalars X<scalar, tying> TIESCALAR classname, LIST X<TIESCALAR>, FETCH this X<FETCH>, STORE this, value X<STORE>, UNTIE this X<UNTIE>, DESTROY this X<DESTROY> =item Tying Arrays X<array, tying> TIEARRAY classname, LIST X<TIEARRAY>, FETCH this, index X<FETCH>, STORE this, index, value X<STORE>, FETCHSIZE this X<FETCHSIZE>, STORESIZE this, count X<STORESIZE>, EXTEND this, count X<EXTEND>, EXISTS this, key X<EXISTS>, DELETE this, key X<DELETE>, CLEAR this X<CLEAR>, PUSH this, LIST X<PUSH>, POP this X<POP>, SHIFT this X<SHIFT>, UNSHIFT this, LIST X<UNSHIFT>, SPLICE this, offset, length, LIST X<SPLICE>, UNTIE this X<UNTIE>, DESTROY this X<DESTROY> =item Tying Hashes X<hash, tying> USER, HOME, CLOBBER, LIST, TIEHASH classname, LIST X<TIEHASH>, FETCH this, key X<FETCH>, STORE this, key, value X<STORE>, DELETE this, key X<DELETE>, CLEAR this X<CLEAR>, EXISTS this, key X<EXISTS>, FIRSTKEY this X<FIRSTKEY>, NEXTKEY this, lastkey X<NEXTKEY>, SCALAR this X<SCALAR>, UNTIE this X<UNTIE>, DESTROY this X<DESTROY> =item Tying FileHandles X<filehandle, tying> TIEHANDLE classname, LIST X<TIEHANDLE>, WRITE this, LIST X<WRITE>, PRINT this, LIST X<PRINT>, PRINTF this, LIST X<PRINTF>, READ this, LIST X<READ>, READLINE this X<READLINE>, GETC this X<GETC>, EOF this X<EOF>, CLOSE this X<CLOSE>, UNTIE this X<UNTIE>, DESTROY this X<DESTROY> =item UNTIE this X<UNTIE> =item The C<untie> Gotcha X<untie> =back =item SEE ALSO =item BUGS =item AUTHOR =back =head2 perldbmfilter - Perl DBM Filters =over 4 =item SYNOPSIS =item DESCRIPTION B<filter_store_key>, B<filter_store_value>, B<filter_fetch_key>, B<filter_fetch_value> =over 4 =item The Filter =item An Example: the NULL termination problem. =item Another Example: Key is a C int. =back =item SEE ALSO =item AUTHOR =back =head2 perlipc - Perl interprocess communication (signals, fifos, pipes, safe subprocesses, sockets, and semaphores) =over 4 =item DESCRIPTION =item Signals =over 4 =item Handling the SIGHUP Signal in Daemons =item Deferred Signals (Safe Signals) Long-running opcodes, Interrupting IO, Restartable system calls, Signals as "faults", Signals triggered by operating system state =back =item Named Pipes =item Using open() for IPC =over 4 =item Filehandles =item Background Processes =item Complete Dissociation of Child from Parent =item Safe Pipe Opens =item Avoiding Pipe Deadlocks =item Bidirectional Communication with Another Process =item Bidirectional Communication with Yourself =back =item Sockets: Client/Server Communication =over 4 =item Internet Line Terminators =item Internet TCP Clients and Servers =item Unix-Domain TCP Clients and Servers =back =item TCP Clients with IO::Socket =over 4 =item A Simple Client C<Proto>, C<PeerAddr>, C<PeerPort> =item A Webget Client =item Interactive Client with IO::Socket =back =item TCP Servers with IO::Socket Proto, LocalPort, Listen, Reuse =item UDP: Message Passing =item SysV IPC =item NOTES =item BUGS =item AUTHOR =item SEE ALSO =back =head2 perlfork - Perl's fork() emulation =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Behavior of other Perl features in forked pseudo-processes $$ or $PROCESS_ID, %ENV, chdir() and all other builtins that accept filenames, wait() and waitpid(), kill(), exec(), exit(), Open handles to files, directories and network sockets =item Resource limits =item Killing the parent process =item Lifetime of the parent process and pseudo-processes =back =item CAVEATS AND LIMITATIONS BEGIN blocks, Open filehandles, Open directory handles, Forking pipe open() not yet implemented, Global state maintained by XSUBs, Interpreter embedded in larger application, Thread-safety of extensions =item PORTABILITY CAVEATS =item BUGS =item AUTHOR =item SEE ALSO =back =head2 perlnumber - semantics of numbers and numeric operations in Perl =over 4 =item SYNOPSIS =item DESCRIPTION =item Storing numbers =item Numeric operators and numeric conversions =item Flavors of Perl numeric operations Arithmetic operators, ++, Arithmetic operators during C<use integer>, Other mathematical operators, Bitwise operators, Bitwise operators during C<use integer>, Operators which expect an integer, Operators which expect a string =item AUTHOR =item SEE ALSO =back =head2 perlthrtut - Tutorial on threads in Perl =over 4 =item DESCRIPTION =item What Is A Thread Anyway? =item Threaded Program Models =over 4 =item Boss/Worker =item Work Crew =item Pipeline =back =item What kind of threads are Perl threads? =item Thread-Safe Modules =item Thread Basics =over 4 =item Basic Thread Support =item A Note about the Examples =item Creating Threads =item Waiting For A Thread To Exit =item Ignoring A Thread =item Process and Thread Termination =back =item Threads And Data =over 4 =item Shared And Unshared Data =item Thread Pitfalls: Races =back =item Synchronization and control =over 4 =item Controlling access: lock() =item A Thread Pitfall: Deadlocks =item Queues: Passing Data Around =item Semaphores: Synchronizing Data Access =item Basic semaphores =item Advanced Semaphores =item Waiting for a Condition =item Giving up control =back =item General Thread Utility Routines =over 4 =item What Thread Am I In? =item Thread IDs =item Are These Threads The Same? =item What Threads Are Running? =back =item A Complete Example =item Different implementations of threads =item Performance considerations =item Process-scope Changes =item Thread-Safety of System Libraries =item Conclusion =item SEE ALSO =item Bibliography =over 4 =item Introductory Texts =item OS-Related References =item Other References =back =item Acknowledgements =item AUTHOR =item Copyrights =back =head2 perlport - Writing portable Perl =over 4 =item DESCRIPTION Not all Perl programs have to be portable, Nearly all of Perl already I<is> portable =item ISSUES =over 4 =item Newlines =item Numbers endianness and Width =item Files and Filesystems =item System Interaction =item Command names versus file pathnames =item Networking =item Interprocess Communication (IPC) =item External Subroutines (XS) =item Standard Modules =item Time and Date =item Character sets and character encoding =item Internationalisation =item System Resources =item Security =item Style =back =item CPAN Testers =item PLATFORMS =over 4 =item Unix =item DOS and Derivatives =item VMS =item VOS =item EBCDIC Platforms =item Acorn RISC OS =item Other perls =back =item FUNCTION IMPLEMENTATIONS =over 4 =item Alphabetical Listing of Perl Functions -I<X>, alarm, atan2, binmode, chmod, chown, chroot, crypt, dbmclose, dbmopen, dump, exec, exit, fcntl, flock, fork, getlogin, getpgrp, getppid, getpriority, getpwnam, getgrnam, getnetbyname, getpwuid, getgrgid, getnetbyaddr, getprotobynumber, getpwent, getgrent, gethostbyname, gethostent, getnetent, getprotoent, getservent, seekdir, sethostent, setnetent, setprotoent, setservent, endpwent, endgrent, endhostent, endnetent, endprotoent, endservent, getsockopt, glob, gmtime, ioctl, kill, link, localtime, lstat, msgctl, msgget, msgsnd, msgrcv, open, readlink, rename, rewinddir, select, semctl, semget, semop, setgrent, setpgrp, setpriority, setpwent, setsockopt, shmctl, shmget, shmread, shmwrite, sleep, socketpair, stat, symlink, syscall, sysopen, system, telldir, times, truncate, umask, utime, wait, waitpid =back =item Supported Platforms Linux (x86, ARM, IA64), HP-UX, AIX, Win32, Windows 2000, Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7, Cygwin, Solaris (x86, SPARC), OpenVMS, Alpha (7.2 and later), I64 (8.2 and later), Symbian, NetBSD, FreeBSD, Debian GNU/kFreeBSD, Haiku, Irix (6.5. What else?), OpenBSD, Dragonfly BSD, Midnight BSD, QNX Neutrino RTOS (6.5.0), MirOS BSD, Stratus OpenVOS (17.0 or later), time_t issues that may or may not be fixed, Symbian (Series 60 v3, 3.2 and 5 - what else?), Stratus VOS / OpenVOS, AIX, Android, FreeMINT =item EOL Platforms =over 4 =item (Perl 5.20) AT&T 3b1 =item (Perl 5.14) Windows 95, Windows 98, Windows ME, Windows NT4 =item (Perl 5.12) Atari MiNT, Apollo Domain/OS, Apple Mac OS 8/9, Tenon Machten =back =item Supported Platforms (Perl 5.8) =item SEE ALSO =item AUTHORS / CONTRIBUTORS =back =head2 perllocale - Perl locale handling (internationalization and localization) =over 4 =item DESCRIPTION =item WHAT IS A LOCALE Category C<LC_NUMERIC>: Numeric formatting, Category C<LC_MONETARY>: Formatting of monetary amounts, Category C<LC_TIME>: Date/Time formatting, Category C<LC_MESSAGES>: Error and other messages, Category C<LC_COLLATE>: Collation, Category C<LC_CTYPE>: Character Types, Other categories =item PREPARING TO USE LOCALES =item USING LOCALES =over 4 =item The C<"use locale"> pragma B<Not within the scope of C<"use locale">>, B<Lingering effects of C<S<use locale>>>, B<Under C<"use locale";>> =item The setlocale function =item Multi-threaded operation =item Finding locales =item LOCALE PROBLEMS =item Testing for broken locales =item Temporarily fixing locale problems =item Permanently fixing locale problems =item Permanently fixing your system's locale configuration =item Fixing system locale configuration =item The localeconv function =item I18N::Langinfo =back =item LOCALE CATEGORIES =over 4 =item Category C<LC_COLLATE>: Collation: Text Comparisons and Sorting =item Category C<LC_CTYPE>: Character Types =item Category C<LC_NUMERIC>: Numeric Formatting =item Category C<LC_MONETARY>: Formatting of monetary amounts =item Category C<LC_TIME>: Respresentation of time =item Other categories =back =item SECURITY =item ENVIRONMENT PERL_SKIP_LOCALE_INIT, PERL_BADLANG, C<LC_ALL>, C<LANGUAGE>, C<LC_CTYPE>, C<LC_COLLATE>, C<LC_MONETARY>, C<LC_NUMERIC>, C<LC_TIME>, C<LANG> =over 4 =item Examples =back =item NOTES =over 4 =item String C<eval> and C<LC_NUMERIC> =item Backward compatibility =item I18N:Collate obsolete =item Sort speed and memory use impacts =item Freely available locale definitions =item I18n and l10n =item An imperfect standard =back =item Unicode and UTF-8 =item BUGS =over 4 =item Collation of strings containing embedded C<NUL> characters =item Multi-threaded =item Broken systems =back =item SEE ALSO =item HISTORY =back =head2 perluniintro - Perl Unicode introduction =over 4 =item DESCRIPTION =over 4 =item Unicode =item Perl's Unicode Support =item Perl's Unicode Model =item Unicode and EBCDIC =item Creating Unicode =item Handling Unicode =item Legacy Encodings =item Unicode I/O =item Displaying Unicode As Text =item Special Cases =item Advanced Topics =item Miscellaneous =item Questions With Answers =item Hexadecimal Notation =item Further Resources =back =item UNICODE IN OLDER PERLS =item SEE ALSO =item ACKNOWLEDGMENTS =item AUTHOR, COPYRIGHT, AND LICENSE =back =head2 perlunicode - Unicode support in Perl =over 4 =item DESCRIPTION =over 4 =item Important Caveats Safest if you C<use feature 'unicode_strings'>, Input and Output Layers, You must convert your non-ASCII, non-UTF-8 Perl scripts to be UTF-8, C<use utf8> still needed to enable L<UTF-8|/Unicode Encodings> in scripts, L<UTF-16|/Unicode Encodings> scripts autodetected =item Byte and Character Semantics =item ASCII Rules versus Unicode Rules When the string has been upgraded to UTF-8, There are additional methods for regular expression patterns =item Extended Grapheme Clusters (Logical characters) =item Unicode Character Properties B<C<\p{All}>>, B<C<\p{Alnum}>>, B<C<\p{Any}>>, B<C<\p{ASCII}>>, B<C<\p{Assigned}>>, B<C<\p{Blank}>>, B<C<\p{Decomposition_Type: Non_Canonical}>> (Short: C<\p{Dt=NonCanon}>), B<C<\p{Graph}>>, B<C<\p{HorizSpace}>>, B<C<\p{In=*}>>, B<C<\p{PerlSpace}>>, B<C<\p{PerlWord}>>, B<C<\p{Posix...}>>, B<C<\p{Present_In: *}>> (Short: C<\p{In=*}>), B<C<\p{Print}>>, B<C<\p{SpacePerl}>>, B<C<\p{Title}>> and B<C<\p{Titlecase}>>, B<C<\p{Unicode}>>, B<C<\p{VertSpace}>>, B<C<\p{Word}>>, B<C<\p{XPosix...}>> =item Comparison of C<\N{...}> and C<\p{name=...}> [1], [2], [3], [4], [5] =item Wildcards in Property Values =item User-Defined Character Properties =item User-Defined Case Mappings (for serious hackers only) =item Character Encodings for Input and Output =item Unicode Regular Expression Support Level [1] C<\N{U+...}> and C<\x{...}>, [2] C<\p{...}> C<\P{...}>. This requirement is for a minimal list of properties. Perl supports these. See R2.7 for other properties, [3] Perl has C<\d> C<\D> C<\s> C<\S> C<\w> C<\W> C<\X> C<[:I<prop>:]> C<[:^I<prop>:]>, plus all the properties specified by L<https://www.unicode.org/reports/tr18/#Compatibility_Properties>. These are described above in L</Other Properties>, [4], Regular expression lookahead, [5] C<\b> C<\B> meet most, but not all, the details of this requirement, but C<\b{wb}> and C<\B{wb}> do, as well as the stricter R2.3, [6], [7], [8] UTF-8/UTF-EBDDIC used in Perl allows not only C<U+10000> to C<U+10FFFF> but also beyond C<U+10FFFF>, [9] Unicode has rewritten this portion of UTS#18 to say that getting canonical equivalence (see UAX#15 L<"Unicode Normalization Forms"|https://www.unicode.org/reports/tr15>) is basically to be done at the programmer level. Use NFD to write both your regular expressions and text to match them against (you can use L<Unicode::Normalize>), [10] Perl has C<\X> and C<\b{gcb}>. Unicode has retracted their "Grapheme Cluster Mode", and recently added string properties, which Perl does not yet support, [11] see L<UAX#29 "Unicode Text Segmentation"|https://www.unicode.org/reports/tr29>,, [12] see L</Wildcards in Property Values> above, [13] Perl supports all the properties in the Unicode Character Database (UCD). It does not yet support the listed properties that come from other Unicode sources, [14] The only optional property that Perl supports is Named Sequence. None of these properties are in the UCD =item Unicode Encodings =item Noncharacter code points =item Beyond Unicode code points =item Security Implications of Unicode =item Unicode in Perl on EBCDIC =item Locales =item When Unicode Does Not Happen =item The "Unicode Bug" =item Forcing Unicode in Perl (Or Unforcing Unicode in Perl) =item Using Unicode in XS =item Hacking Perl to work on earlier Unicode versions (for very serious hackers only) =item Porting code from perl-5.6.X =back =item BUGS =over 4 =item Interaction with Extensions =item Speed =back =item SEE ALSO =back =head2 perlunicook - cookbookish examples of handling Unicode in Perl =over 4 =item DESCRIPTION =item EXAMPLES =over 4 =item ℞ 0: Standard preamble =item ℞ 1: Generic Unicode-savvy filter =item ℞ 2: Fine-tuning Unicode warnings =item ℞ 3: Declare source in utf8 for identifiers and literals =item ℞ 4: Characters and their numbers =item ℞ 5: Unicode literals by character number =item ℞ 6: Get character name by number =item ℞ 7: Get character number by name =item ℞ 8: Unicode named characters =item ℞ 9: Unicode named sequences =item ℞ 10: Custom named characters =item ℞ 11: Names of CJK codepoints =item ℞ 12: Explicit encode/decode =item ℞ 13: Decode program arguments as utf8 =item ℞ 14: Decode program arguments as locale encoding =item ℞ 15: Declare STD{IN,OUT,ERR} to be utf8 =item ℞ 16: Declare STD{IN,OUT,ERR} to be in locale encoding =item ℞ 17: Make file I/O default to utf8 =item ℞ 18: Make all I/O and args default to utf8 =item ℞ 19: Open file with specific encoding =item ℞ 20: Unicode casing =item ℞ 21: Unicode case-insensitive comparisons =item ℞ 22: Match Unicode linebreak sequence in regex =item ℞ 23: Get character category =item ℞ 24: Disabling Unicode-awareness in builtin charclasses =item ℞ 25: Match Unicode properties in regex with \p, \P =item ℞ 26: Custom character properties =item ℞ 27: Unicode normalization =item ℞ 28: Convert non-ASCII Unicode numerics =item ℞ 29: Match Unicode grapheme cluster in regex =item ℞ 30: Extract by grapheme instead of by codepoint (regex) =item ℞ 31: Extract by grapheme instead of by codepoint (substr) =item ℞ 32: Reverse string by grapheme =item ℞ 33: String length in graphemes =item ℞ 34: Unicode column-width for printing =item ℞ 35: Unicode collation =item ℞ 36: Case- I<and> accent-insensitive Unicode sort =item ℞ 37: Unicode locale collation =item ℞ 38: Making C<cmp> work on text instead of codepoints =item ℞ 39: Case- I<and> accent-insensitive comparisons =item ℞ 40: Case- I<and> accent-insensitive locale comparisons =item ℞ 41: Unicode linebreaking =item ℞ 42: Unicode text in DBM hashes, the tedious way =item ℞ 43: Unicode text in DBM hashes, the easy way =item ℞ 44: PROGRAM: Demo of Unicode collation and printing =back =item SEE ALSO §3.13 Default Case Algorithms, page 113; §4.2 Case, pages 120–122; Case Mappings, page 166–172, especially Caseless Matching starting on page 170, UAX #44: Unicode Character Database, UTS #18: Unicode Regular Expressions, UAX #15: Unicode Normalization Forms, UTS #10: Unicode Collation Algorithm, UAX #29: Unicode Text Segmentation, UAX #14: Unicode Line Breaking Algorithm, UAX #11: East Asian Width =item AUTHOR =item COPYRIGHT AND LICENCE =item REVISION HISTORY =back =head2 perlunifaq - Perl Unicode FAQ =over 4 =item Q and A =over 4 =item perlunitut isn't really a Unicode tutorial, is it? =item What character encodings does Perl support? =item Which version of perl should I use? =item What about binary data, like images? =item When should I decode or encode? =item What if I don't decode? =item What if I don't encode? =item Is there a way to automatically decode or encode? =item What if I don't know which encoding was used? =item Can I use Unicode in my Perl sources? =item Data::Dumper doesn't restore the UTF8 flag; is it broken? =item Why do regex character classes sometimes match only in the ASCII range? =item Why do some characters not uppercase or lowercase correctly? =item How can I determine if a string is a text string or a binary string? =item How do I convert from encoding FOO to encoding BAR? =item What are C<decode_utf8> and C<encode_utf8>? =item What is a "wide character"? =back =item INTERNALS =over 4 =item What is "the UTF8 flag"? =item What about the C<use bytes> pragma? =item What about the C<use encoding> pragma? =item What is the difference between C<:encoding> and C<:utf8>? =item What's the difference between C<UTF-8> and C<utf8>? =item I lost track; what encoding is the internal format really? =back =item AUTHOR =item SEE ALSO =back =head2 perluniprops - Index of Unicode Version 13.0.0 character properties in Perl =over 4 =item DESCRIPTION =item Properties accessible through C<\p{}> and C<\P{}> Single form (C<\p{name}>) tighter rules:, white space adjacent to a non-word character, underscores separating digits in numbers, Compound form (C<\p{name=value}> or C<\p{name:value}>) tighter rules:, Stabilized, Deprecated, Obsolete, Discouraged, Z<>B<*> is a wild-card, B<(\d+)> in the info column gives the number of Unicode code points matched by this property, B<D> means this is deprecated, B<O> means this is obsolete, B<S> means this is stabilized, B<T> means tighter (stricter) name matching applies, B<X> means use of this form is discouraged, and may not be stable =over 4 =item Legal C<\p{}> and C<\P{}> constructs that match no characters \p{Canonical_Combining_Class=Attached_Below_Left}, \p{Canonical_Combining_Class=CCC133}, \p{Grapheme_Cluster_Break=E_Base}, \p{Grapheme_Cluster_Break=E_Base_GAZ}, \p{Grapheme_Cluster_Break=E_Modifier}, \p{Grapheme_Cluster_Break=Glue_After_Zwj}, \p{Word_Break=E_Base}, \p{Word_Break=E_Base_GAZ}, \p{Word_Break=E_Modifier}, \p{Word_Break=Glue_After_Zwj} =back =item Properties accessible through Unicode::UCD =item Properties accessible through other means =item Unicode character properties that are NOT accepted by Perl I<Expands_On_NFC> (XO_NFC), I<Expands_On_NFD> (XO_NFD), I<Expands_On_NFKC> (XO_NFKC), I<Expands_On_NFKD> (XO_NFKD), I<Grapheme_Link> (Gr_Link), I<Jamo_Short_Name> (JSN), I<Other_Alphabetic> (OAlpha), I<Other_Default_Ignorable_Code_Point> (ODI), I<Other_Grapheme_Extend> (OGr_Ext), I<Other_ID_Continue> (OIDC), I<Other_ID_Start> (OIDS), I<Other_Lowercase> (OLower), I<Other_Math> (OMath), I<Other_Uppercase> (OUpper), I<Script=Katakana_Or_Hiragana> (sc=Hrkt), I<Script_Extensions=Katakana_Or_Hiragana> (scx=Hrkt) =item Other information in the Unicode data base F<auxiliary/GraphemeBreakTest.html>, F<auxiliary/LineBreakTest.html>, F<auxiliary/SentenceBreakTest.html>, F<auxiliary/WordBreakTest.html>, F<BidiCharacterTest.txt>, F<BidiTest.txt>, F<NormTest.txt>, F<CJKRadicals.txt>, F<emoji/ReadMe.txt>, F<ReadMe.txt>, F<EmojiSources.txt>, F<extracted/DName.txt>, F<Index.txt>, F<NamedSqProv.txt>, F<NamesList.html>, F<NamesList.txt>, F<NormalizationCorrections.txt>, F<NushuSources.txt>, F<StandardizedVariants.html>, F<StandardizedVariants.txt>, F<TangutSources.txt>, F<USourceData.txt>, F<USourceGlyphs.pdf> =item SEE ALSO =back =head2 perlunitut - Perl Unicode Tutorial =over 4 =item DESCRIPTION =over 4 =item Definitions =item Your new toolkit =item I/O flow (the actual 5 minute tutorial) =back =item SUMMARY =item Q and A (or FAQ) =item ACKNOWLEDGEMENTS =item AUTHOR =item SEE ALSO =back =head2 perlebcdic - Considerations for running Perl on EBCDIC platforms =over 4 =item DESCRIPTION =item COMMON CHARACTER CODE SETS =over 4 =item ASCII =item ISO 8859 =item Latin 1 (ISO 8859-1) =item EBCDIC B<0037>, B<1047>, B<POSIX-BC> =item Unicode code points versus EBCDIC code points =item Unicode and UTF =item Using Encode =back =item SINGLE OCTET TABLES recipe 0, recipe 1, recipe 2, recipe 3, recipe 4, recipe 5, recipe 6 =over 4 =item Table in hex, sorted in 1047 order =back =item IDENTIFYING CHARACTER CODE SETS =item CONVERSIONS =over 4 =item C<utf8::unicode_to_native()> and C<utf8::native_to_unicode()> =item tr/// =item iconv =item C RTL =back =item OPERATOR DIFFERENCES =item FUNCTION DIFFERENCES C<chr()>, C<ord()>, C<pack()>, C<print()>, C<printf()>, C<sort()>, C<sprintf()>, C<unpack()> =item REGULAR EXPRESSION DIFFERENCES =item SOCKETS =item SORTING =over 4 =item Ignore ASCII vs. EBCDIC sort differences. =item Use a sort helper function =item MONO CASE then sort data (for non-digits, non-underscore) =item Perform sorting on one type of platform only. =back =item TRANSFORMATION FORMATS =over 4 =item URL decoding and encoding =item uu encoding and decoding =item Quoted-Printable encoding and decoding =item Caesarean ciphers =back =item Hashing order and checksums =item I18N AND L10N =item MULTI-OCTET CHARACTER SETS =item OS ISSUES =over 4 =item OS/400 PASE, IFS access =item OS/390, z/OS C<sigaction>, C<chcp>, dataset access, C<iconv>, locales =item POSIX-BC? =back =item BUGS =item SEE ALSO =item REFERENCES =item HISTORY =item AUTHOR =back =head2 perlsec - Perl security =over 4 =item DESCRIPTION =item SECURITY VULNERABILITY CONTACT INFORMATION =item SECURITY MECHANISMS AND CONCERNS =over 4 =item Taint mode =item Laundering and Detecting Tainted Data =item Switches On the "#!" Line =item Taint mode and @INC =item Cleaning Up Your Path =item Shebang Race Condition =item Protecting Your Programs =item Unicode =item Algorithmic Complexity Attacks Hash Seed Randomization, Hash Traversal Randomization, Bucket Order Perturbance, New Default Hash Function, Alternative Hash Functions =item Using Sudo =back =item SEE ALSO =back =head2 perlsecpolicy - Perl security report handling policy =over 4 =item DESCRIPTION =item REPORTING SECURITY ISSUES IN PERL =item WHAT ARE SECURITY ISSUES =over 4 =item Software covered by the Perl security team =item Bugs that may qualify as security issues in Perl =item Bugs that do not qualify as security issues in Perl =item Bugs that require special categorization =back =item HOW WE DEAL WITH SECURITY ISSUES =over 4 =item Perl's vulnerability remediation workflow =item Publicly known and zero-day security issues =item Vulnerability credit and bounties =back =back =head2 perlmod - Perl modules (packages and symbol tables) =over 4 =item DESCRIPTION =over 4 =item Is this the document you were after? This doc, L<perlnewmod>, L<perlmodstyle> =item Packages X<package> X<namespace> X<variable, global> X<global variable> X<global> =item Symbol Tables X<symbol table> X<stash> X<%::> X<%main::> X<typeglob> X<glob> X<alias> =item BEGIN, UNITCHECK, CHECK, INIT and END X<BEGIN> X<UNITCHECK> X<CHECK> X<INIT> X<END> =item Perl Classes X<class> X<@ISA> =item Perl Modules X<module> =item Making your module threadsafe X<threadsafe> X<thread safe> X<module, threadsafe> X<module, thread safe> X<CLONE> X<CLONE_SKIP> X<thread> X<threads> X<ithread> =back =item SEE ALSO =back =head2 perlmodlib - constructing new Perl modules and finding existing ones =over 4 =item THE PERL MODULE LIBRARY =over 4 =item Pragmatic Modules attributes, autodie, autodie::exception, autodie::exception::system, autodie::hints, autodie::skip, autouse, base, bigint, bignum, bigrat, blib, bytes, charnames, constant, deprecate, diagnostics, encoding, encoding::warnings, experimental, feature, fields, filetest, if, integer, less, lib, locale, mro, ok, open, ops, overload, overloading, parent, re, sigtrap, sort, strict, subs, threads, threads::shared, utf8, vars, version, vmsish, warnings, warnings::register =item Standard Modules Amiga::ARexx, Amiga::Exec, AnyDBM_File, App::Cpan, App::Prove, App::Prove::State, App::Prove::State::Result, App::Prove::State::Result::Test, Archive::Tar, Archive::Tar::File, Attribute::Handlers, AutoLoader, AutoSplit, B, B::Concise, B::Deparse, B::Op_private, B::Showlex, B::Terse, B::Xref, Benchmark, C<IO::Socket::IP>, C<Socket>, CORE, CPAN, CPAN::API::HOWTO, CPAN::Debug, CPAN::Distroprefs, CPAN::FirstTime, CPAN::HandleConfig, CPAN::Kwalify, CPAN::Meta, CPAN::Meta::Converter, CPAN::Meta::Feature, CPAN::Meta::History, CPAN::Meta::History::Meta_1_0, CPAN::Meta::History::Meta_1_1, CPAN::Meta::History::Meta_1_2, CPAN::Meta::History::Meta_1_3, CPAN::Meta::History::Meta_1_4, CPAN::Meta::Merge, CPAN::Meta::Prereqs, CPAN::Meta::Requirements, CPAN::Meta::Spec, CPAN::Meta::Validator, CPAN::Meta::YAML, CPAN::Nox, CPAN::Plugin, CPAN::Plugin::Specfile, CPAN::Queue, CPAN::Tarzip, CPAN::Version, Carp, Class::Struct, Compress::Raw::Bzip2, Compress::Raw::Zlib, Compress::Zlib, Config, Config::Extensions, Config::Perl::V, Cwd, DB, DBM_Filter, DBM_Filter::compress, DBM_Filter::encode, DBM_Filter::int32, DBM_Filter::null, DBM_Filter::utf8, DB_File, Data::Dumper, Devel::PPPort, Devel::Peek, Devel::SelfStubber, Digest, Digest::MD5, Digest::SHA, Digest::base, Digest::file, DirHandle, Dumpvalue, DynaLoader, Encode, Encode::Alias, Encode::Byte, Encode::CJKConstants, Encode::CN, Encode::CN::HZ, Encode::Config, Encode::EBCDIC, Encode::Encoder, Encode::Encoding, Encode::GSM0338, Encode::Guess, Encode::JP, Encode::JP::H2Z, Encode::JP::JIS7, Encode::KR, Encode::KR::2022_KR, Encode::MIME::Header, Encode::MIME::Name, Encode::PerlIO, Encode::Supported, Encode::Symbol, Encode::TW, Encode::Unicode, Encode::Unicode::UTF7, English, Env, Errno, Exporter, Exporter::Heavy, ExtUtils::CBuilder, ExtUtils::CBuilder::Platform::Windows, ExtUtils::Command, ExtUtils::Command::MM, ExtUtils::Constant, ExtUtils::Constant::Base, ExtUtils::Constant::Utils, ExtUtils::Constant::XS, ExtUtils::Embed, ExtUtils::Install, ExtUtils::Installed, ExtUtils::Liblist, ExtUtils::MM, ExtUtils::MM::Utils, ExtUtils::MM_AIX, ExtUtils::MM_Any, ExtUtils::MM_BeOS, ExtUtils::MM_Cygwin, ExtUtils::MM_DOS, ExtUtils::MM_Darwin, ExtUtils::MM_MacOS, ExtUtils::MM_NW5, ExtUtils::MM_OS2, ExtUtils::MM_QNX, ExtUtils::MM_UWIN, ExtUtils::MM_Unix, ExtUtils::MM_VMS, ExtUtils::MM_VOS, ExtUtils::MM_Win32, ExtUtils::MM_Win95, ExtUtils::MY, ExtUtils::MakeMaker, ExtUtils::MakeMaker::Config, ExtUtils::MakeMaker::FAQ, ExtUtils::MakeMaker::Locale, ExtUtils::MakeMaker::Tutorial, ExtUtils::Manifest, ExtUtils::Miniperl, ExtUtils::Mkbootstrap, ExtUtils::Mksymlists, ExtUtils::Packlist, ExtUtils::ParseXS, ExtUtils::ParseXS::Constants, ExtUtils::ParseXS::Eval, ExtUtils::ParseXS::Utilities, ExtUtils::Typemaps, ExtUtils::Typemaps::Cmd, ExtUtils::Typemaps::InputMap, ExtUtils::Typemaps::OutputMap, ExtUtils::Typemaps::Type, ExtUtils::XSSymSet, ExtUtils::testlib, Fatal, Fcntl, File::Basename, File::Compare, File::Copy, File::DosGlob, File::Fetch, File::Find, File::Glob, File::GlobMapper, File::Path, File::Spec, File::Spec::AmigaOS, File::Spec::Cygwin, File::Spec::Epoc, File::Spec::Functions, File::Spec::Mac, File::Spec::OS2, File::Spec::Unix, File::Spec::VMS, File::Spec::Win32, File::Temp, File::stat, FileCache, FileHandle, Filter::Simple, Filter::Util::Call, FindBin, GDBM_File, Getopt::Long, Getopt::Std, HTTP::Tiny, Hash::Util, Hash::Util::FieldHash, I18N::Collate, I18N::LangTags, I18N::LangTags::Detect, I18N::LangTags::List, I18N::Langinfo, IO, IO::Compress::Base, IO::Compress::Bzip2, IO::Compress::Deflate, IO::Compress::FAQ, IO::Compress::Gzip, IO::Compress::RawDeflate, IO::Compress::Zip, IO::Dir, IO::File, IO::Handle, IO::Pipe, IO::Poll, IO::Seekable, IO::Select, IO::Socket, IO::Socket::INET, IO::Socket::UNIX, IO::Uncompress::AnyInflate, IO::Uncompress::AnyUncompress, IO::Uncompress::Base, IO::Uncompress::Bunzip2, IO::Uncompress::Gunzip, IO::Uncompress::Inflate, IO::Uncompress::RawInflate, IO::Uncompress::Unzip, IO::Zlib, IPC::Cmd, IPC::Msg, IPC::Open2, IPC::Open3, IPC::Semaphore, IPC::SharedMem, IPC::SysV, Internals, JSON::PP, JSON::PP::Boolean, List::Util, List::Util::XS, Locale::Maketext, Locale::Maketext::Cookbook, Locale::Maketext::Guts, Locale::Maketext::GutsLoader, Locale::Maketext::Simple, Locale::Maketext::TPJ13, MIME::Base64, MIME::QuotedPrint, Math::BigFloat, Math::BigInt, Math::BigInt::Calc, Math::BigInt::FastCalc, Math::BigInt::Lib, Math::BigRat, Math::Complex, Math::Trig, Memoize, Memoize::AnyDBM_File, Memoize::Expire, Memoize::ExpireFile, Memoize::ExpireTest, Memoize::NDBM_File, Memoize::SDBM_File, Memoize::Storable, Module::CoreList, Module::CoreList::Utils, Module::Load, Module::Load::Conditional, Module::Loaded, Module::Metadata, NDBM_File, NEXT, Net::Cmd, Net::Config, Net::Domain, Net::FTP, Net::FTP::dataconn, Net::NNTP, Net::Netrc, Net::POP3, Net::Ping, Net::SMTP, Net::Time, Net::hostent, Net::libnetFAQ, Net::netent, Net::protoent, Net::servent, O, ODBM_File, Opcode, POSIX, Params::Check, Parse::CPAN::Meta, Perl::OSType, PerlIO, PerlIO::encoding, PerlIO::mmap, PerlIO::scalar, PerlIO::via, PerlIO::via::QuotedPrint, Pod::Checker, Pod::Escapes, Pod::Functions, Pod::Html, Pod::Man, Pod::ParseLink, Pod::Perldoc, Pod::Perldoc::BaseTo, Pod::Perldoc::GetOptsOO, Pod::Perldoc::ToANSI, Pod::Perldoc::ToChecker, Pod::Perldoc::ToMan, Pod::Perldoc::ToNroff, Pod::Perldoc::ToPod, Pod::Perldoc::ToRtf, Pod::Perldoc::ToTerm, Pod::Perldoc::ToText, Pod::Perldoc::ToTk, Pod::Perldoc::ToXml, Pod::Simple, Pod::Simple::Checker, Pod::Simple::Debug, Pod::Simple::DumpAsText, Pod::Simple::DumpAsXML, Pod::Simple::HTML, Pod::Simple::HTMLBatch, Pod::Simple::JustPod, Pod::Simple::LinkSection, Pod::Simple::Methody, Pod::Simple::PullParser, Pod::Simple::PullParserEndToken, Pod::Simple::PullParserStartToken, Pod::Simple::PullParserTextToken, Pod::Simple::PullParserToken, Pod::Simple::RTF, Pod::Simple::Search, Pod::Simple::SimpleTree, Pod::Simple::Subclassing, Pod::Simple::Text, Pod::Simple::TextContent, Pod::Simple::XHTML, Pod::Simple::XMLOutStream, Pod::Text, Pod::Text::Color, Pod::Text::Overstrike, Pod::Text::Termcap, Pod::Usage, SDBM_File, Safe, Scalar::Util, Search::Dict, SelectSaver, SelfLoader, Storable, Sub::Util, Symbol, Sys::Hostname, Sys::Syslog, Sys::Syslog::Win32, TAP::Base, TAP::Formatter::Base, TAP::Formatter::Color, TAP::Formatter::Console, TAP::Formatter::Console::ParallelSession, TAP::Formatter::Console::Session, TAP::Formatter::File, TAP::Formatter::File::Session, TAP::Formatter::Session, TAP::Harness, TAP::Harness::Env, TAP::Object, TAP::Parser, TAP::Parser::Aggregator, TAP::Parser::Grammar, TAP::Parser::Iterator, TAP::Parser::Iterator::Array, TAP::Parser::Iterator::Process, TAP::Parser::Iterator::Stream, TAP::Parser::IteratorFactory, TAP::Parser::Multiplexer, TAP::Parser::Result, TAP::Parser::Result::Bailout, TAP::Parser::Result::Comment, TAP::Parser::Result::Plan, TAP::Parser::Result::Pragma, TAP::Parser::Result::Test, TAP::Parser::Result::Unknown, TAP::Parser::Result::Version, TAP::Parser::Result::YAML, TAP::Parser::ResultFactory, TAP::Parser::Scheduler, TAP::Parser::Scheduler::Job, TAP::Parser::Scheduler::Spinner, TAP::Parser::Source, TAP::Parser::SourceHandler, TAP::Parser::SourceHandler::Executable, TAP::Parser::SourceHandler::File, TAP::Parser::SourceHandler::Handle, TAP::Parser::SourceHandler::Perl, TAP::Parser::SourceHandler::RawTAP, TAP::Parser::YAMLish::Reader, TAP::Parser::YAMLish::Writer, Term::ANSIColor, Term::Cap, Term::Complete, Term::ReadLine, Test, Test2, Test2::API, Test2::API::Breakage, Test2::API::Context, Test2::API::Instance, Test2::API::Stack, Test2::Event, Test2::Event::Bail, Test2::Event::Diag, Test2::Event::Encoding, Test2::Event::Exception, Test2::Event::Fail, Test2::Event::Generic, Test2::Event::Note, Test2::Event::Ok, Test2::Event::Pass, Test2::Event::Plan, Test2::Event::Skip, Test2::Event::Subtest, Test2::Event::TAP::Version, Test2::Event::V2, Test2::Event::Waiting, Test2::EventFacet, Test2::EventFacet::About, Test2::EventFacet::Amnesty, Test2::EventFacet::Assert, Test2::EventFacet::Control, Test2::EventFacet::Error, Test2::EventFacet::Hub, Test2::EventFacet::Info, Test2::EventFacet::Info::Table, Test2::EventFacet::Meta, Test2::EventFacet::Parent, Test2::EventFacet::Plan, Test2::EventFacet::Render, Test2::EventFacet::Trace, Test2::Formatter, Test2::Formatter::TAP, Test2::Hub, Test2::Hub::Interceptor, Test2::Hub::Interceptor::Terminator, Test2::Hub::Subtest, Test2::IPC, Test2::IPC::Driver, Test2::IPC::Driver::Files, Test2::Tools::Tiny, Test2::Transition, Test2::Util, Test2::Util::ExternalMeta, Test2::Util::Facets2Legacy, Test2::Util::HashBase, Test2::Util::Trace, Test::Builder, Test::Builder::Formatter, Test::Builder::IO::Scalar, Test::Builder::Module, Test::Builder::Tester, Test::Builder::Tester::Color, Test::Builder::TodoDiag, Test::Harness, Test::Harness::Beyond, Test::More, Test::Simple, Test::Tester, Test::Tester::Capture, Test::Tester::CaptureRunner, Test::Tutorial, Test::use::ok, Text::Abbrev, Text::Balanced, Text::ParseWords, Text::Tabs, Text::Wrap, Thread, Thread::Queue, Thread::Semaphore, Tie::Array, Tie::File, Tie::Handle, Tie::Hash, Tie::Hash::NamedCapture, Tie::Memoize, Tie::RefHash, Tie::Scalar, Tie::StdHandle, Tie::SubstrHash, Time::HiRes, Time::Local, Time::Piece, Time::Seconds, Time::gmtime, Time::localtime, Time::tm, UNIVERSAL, Unicode::Collate, Unicode::Collate::CJK::Big5, Unicode::Collate::CJK::GB2312, Unicode::Collate::CJK::JISX0208, Unicode::Collate::CJK::Korean, Unicode::Collate::CJK::Pinyin, Unicode::Collate::CJK::Stroke, Unicode::Collate::CJK::Zhuyin, Unicode::Collate::Locale, Unicode::Normalize, Unicode::UCD, User::grent, User::pwent, VMS::DCLsym, VMS::Filespec, VMS::Stdio, Win32, Win32API::File, Win32CORE, XS::APItest, XS::Typemap, XSLoader, autodie::Scope::Guard, autodie::Scope::GuardStack, autodie::Util, version::Internals =item Extension Modules =back =item CPAN =over 4 =item Africa South Africa, Uganda, Zimbabwe =item Asia Bangladesh, China, India, Indonesia, Iran, Israel, Japan, Kazakhstan, Philippines, Qatar, Republic of Korea, Singapore, Taiwan, Turkey, Viet Nam =item Europe Austria, Belarus, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Moldova, Netherlands, Norway, Poland, Portugal, Romania, Russian Federation, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Ukraine, United Kingdom =item North America Canada, Costa Rica, Mexico, United States, Alabama, Arizona, California, Idaho, Illinois, Indiana, Kansas, Massachusetts, Michigan, New Hampshire, New Jersey, New York, North Carolina, Oregon, Pennsylvania, South Carolina, Texas, Utah, Virginia, Washington, Wisconsin =item Oceania Australia, New Caledonia, New Zealand =item South America Argentina, Brazil, Chile =item RSYNC Mirrors =back =item Modules: Creation, Use, and Abuse =over 4 =item Guidelines for Module Creation =item Guidelines for Converting Perl 4 Library Scripts into Modules =item Guidelines for Reusing Application Code =back =item NOTE =back =head2 perlmodstyle - Perl module style guide =over 4 =item INTRODUCTION =item QUICK CHECKLIST =over 4 =item Before you start =item The API =item Stability =item Documentation =item Release considerations =back =item BEFORE YOU START WRITING A MODULE =over 4 =item Has it been done before? =item Do one thing and do it well =item What's in a name? =item Get feedback before publishing =back =item DESIGNING AND WRITING YOUR MODULE =over 4 =item To OO or not to OO? =item Designing your API Write simple routines to do simple things, Separate functionality from output, Provide sensible shortcuts and defaults, Naming conventions, Parameter passing =item Strictness and warnings =item Backwards compatibility =item Error handling and messages =back =item DOCUMENTING YOUR MODULE =over 4 =item POD =item README, INSTALL, release notes, changelogs perl Makefile.PL, make, make test, make install, perl Build.PL, perl Build, perl Build test, perl Build install =back =item RELEASE CONSIDERATIONS =over 4 =item Version numbering =item Pre-requisites =item Testing =item Packaging =item Licensing =back =item COMMON PITFALLS =over 4 =item Reinventing the wheel =item Trying to do too much =item Inappropriate documentation =back =item SEE ALSO L<perlstyle>, L<perlnewmod>, L<perlpod>, L<podchecker>, Packaging Tools, Testing tools, L<https://pause.perl.org/>, Any good book on software engineering =item AUTHOR =back =head2 perlmodinstall - Installing CPAN Modules =over 4 =item DESCRIPTION =over 4 =item PREAMBLE B<DECOMPRESS> the file, B<UNPACK> the file into a directory, B<BUILD> the module (sometimes unnecessary), B<INSTALL> the module =back =item PORTABILITY =item HEY =item AUTHOR =item COPYRIGHT =back =head2 perlnewmod - preparing a new module for distribution =over 4 =item DESCRIPTION =over 4 =item Warning =item What should I make into a module? =item Step-by-step: Preparing the ground Look around, Check it's new, Discuss the need, Choose a name, Check again =item Step-by-step: Making the module Start with F<module-starter> or F<h2xs>, Use L<strict|strict> and L<warnings|warnings>, Use L<Carp|Carp>, Use L<Exporter|Exporter> - wisely!, Use L<plain old documentation|perlpod>, Write tests, Write the F<README>, Write F<Changes> =item Step-by-step: Distributing your module Get a CPAN user ID, C<perl Makefile.PL; make test; make distcheck; make dist>, Upload the tarball, Fix bugs! =back =item AUTHOR =item SEE ALSO =back =head2 perlpragma - how to write a user pragma =over 4 =item DESCRIPTION =item A basic example =item Key naming =item Implementation details =back =head2 perlutil - utilities packaged with the Perl distribution =over 4 =item DESCRIPTION =item LIST OF UTILITIES =over 4 =item Documentation L<perldoc|perldoc>, L<pod2man|pod2man> and L<pod2text|pod2text>, L<pod2html|pod2html>, L<pod2usage|pod2usage>, L<podchecker|podchecker>, L<splain|splain>, C<roffitall> =item Converters =item Administration L<libnetcfg|libnetcfg>, L<perlivp> =item Development L<perlbug|perlbug>, L<perlthanks|perlbug>, L<h2ph|h2ph>, L<h2xs|h2xs>, L<enc2xs>, L<xsubpp>, L<prove>, L<corelist> =item General tools L<piconv>, L<ptar>, L<ptardiff>, L<ptargrep>, L<shasum>, L<zipdetails> =item Installation L<cpan>, L<instmodsh> =back =item SEE ALSO =back =head2 perlfilter - Source Filters =over 4 =item DESCRIPTION =item CONCEPTS =item USING FILTERS =item WRITING A SOURCE FILTER =item WRITING A SOURCE FILTER IN C B<Decryption Filters> =item CREATING A SOURCE FILTER AS A SEPARATE EXECUTABLE =item WRITING A SOURCE FILTER IN PERL =item USING CONTEXT: THE DEBUG FILTER =item CONCLUSION =item LIMITATIONS =item THINGS TO LOOK OUT FOR Some Filters Clobber the C<DATA> Handle =item REQUIREMENTS =item AUTHOR =item Copyrights =back =head2 perldtrace - Perl's support for DTrace =over 4 =item SYNOPSIS =item DESCRIPTION =item HISTORY =item PROBES sub-entry(SUBNAME, FILE, LINE, PACKAGE), sub-return(SUBNAME, FILE, LINE, PACKAGE), phase-change(NEWPHASE, OLDPHASE), op-entry(OPNAME), loading-file(FILENAME), loaded-file(FILENAME) =item EXAMPLES Most frequently called functions, Trace function calls, Function calls during interpreter cleanup, System calls at compile time, Perl functions that execute the most opcodes =item REFERENCES DTrace Dynamic Tracing Guide, DTrace: Dynamic Tracing in Oracle Solaris, Mac OS X and FreeBSD =item SEE ALSO L<Devel::DTrace::Provider> =item AUTHORS =back =head2 perlglossary - Perl Glossary =over 4 =item VERSION =item DESCRIPTION =over 4 =item A accessor methods, actual arguments, address operator, algorithm, alias, alphabetic, alternatives, anonymous, application, architecture, argument, ARGV, arithmetical operator, array, array context, Artistic License, ASCII, assertion, assignment, assignment operator, associative array, associativity, asynchronous, atom, atomic operation, attribute, autogeneration, autoincrement, autoload, autosplit, autovivification, AV, awk =item B backreference, backtracking, backward compatibility, bareword, base class, big-endian, binary, binary operator, bind, bit, bit shift, bit string, bless, block, BLOCK, block buffering, Boolean, Boolean context, breakpoint, broadcast, BSD, bucket, buffer, built-in, bundle, byte, bytecode =item C C, cache, callback, call by reference, call by value, canonical, capture variables, capturing, cargo cult, case, casefolding, casemapping, character, character class, character property, circumfix operator, class, class method, client, closure, cluster, CODE, code generator, codepoint, code subpattern, collating sequence, co-maintainer, combining character, command, command buffering, command-line arguments, command name, comment, compilation unit, compile, compile phase, compiler, compile time, composer, concatenation, conditional, connection, construct, constructor, context, continuation, core dump, CPAN, C preprocessor, cracker, currently selected output channel, current package, current working directory, CV =item D dangling statement, datagram, data structure, data type, DBM, declaration, declarator, decrement, default, defined, delimiter, dereference, derived class, descriptor, destroy, destructor, device, directive, directory, directory handle, discipline, dispatch, distribution, dual-lived, dweomer, dwimmer, dynamic scoping =item E eclectic, element, embedding, empty subclass test, encapsulation, endian, en passant, environment, environment variable, EOF, errno, error, escape sequence, exception, exception handling, exec, executable file, execute, execute bit, exit status, exploit, export, expression, extension =item F false, FAQ, fatal error, feeping creaturism, field, FIFO, file, file descriptor, fileglob, filehandle, filename, filesystem, file test operator, filter, first-come, flag, floating point, flush, FMTEYEWTK, foldcase, fork, formal arguments, format, freely available, freely redistributable, freeware, function, funny character =item G garbage collection, GID, glob, global, global destruction, glue language, granularity, grapheme, greedy, grep, group, GV =item H hacker, handler, hard reference, hash, hash table, header file, here document, hexadecimal, home directory, host, hubris, HV =item I identifier, impatience, implementation, import, increment, indexing, indirect filehandle, indirection, indirect object, indirect object slot, infix, inheritance, instance, instance data, instance method, instance variable, integer, interface, interpolation, interpreter, invocant, invocation, I/O, IO, I/O layer, IPA, IP, IPC, is-a, iteration, iterator, IV =item J JAPH =item K key, keyword =item L label, laziness, leftmost longest, left shift, lexeme, lexer, lexical analysis, lexical scoping, lexical variable, library, LIFO, line, linebreak, line buffering, line number, link, LIST, list, list context, list operator, list value, literal, little-endian, local, logical operator, lookahead, lookbehind, loop, loop control statement, loop label, lowercase, lvaluable, lvalue, lvalue modifier =item M magic, magical increment, magical variables, Makefile, man, manpage, matching, member data, memory, metacharacter, metasymbol, method, method resolution order, minicpan, minimalism, mode, modifier, module, modulus, mojibake, monger, mortal, mro, multidimensional array, multiple inheritance =item N named pipe, namespace, NaN, network address, newline, NFS, normalization, null character, null list, null string, numeric context, numification, NV, nybble =item O object, octal, offset, one-liner, open source software, operand, operating system, operator, operator overloading, options, ordinal, overloading, overriding, owner =item P package, pad, parameter, parent class, parse tree, parsing, patch, PATH, pathname, pattern, pattern matching, PAUSE, Perl mongers, permission bits, Pern, pipe, pipeline, platform, pod, pod command, pointer, polymorphism, port, portable, porter, possessive, POSIX, postfix, pp, pragma, precedence, prefix, preprocessing, primary maintainer, procedure, process, program, program generator, progressive matching, property, protocol, prototype, pseudofunction, pseudohash, pseudoliteral, public domain, pumpkin, pumpking, PV =item Q qualified, quantifier =item R race condition, readable, reaping, record, recursion, reference, referent, regex, regular expression, regular expression modifier, regular file, relational operator, reserved words, return value, RFC, right shift, role, root, RTFM, run phase, runtime, runtime pattern, RV, rvalue =item S sandbox, scalar, scalar context, scalar literal, scalar value, scalar variable, scope, scratchpad, script, script kiddie, sed, semaphore, separator, serialization, server, service, setgid, setuid, shared memory, shebang, shell, side effects, sigil, signal, signal handler, single inheritance, slice, slurp, socket, soft reference, source filter, stack, standard, standard error, standard input, standard I/O, Standard Library, standard output, statement, statement modifier, static, static method, static scoping, static variable, stat structure, status, STDERR, STDIN, STDIO, STDOUT, stream, string, string context, stringification, struct, structure, subclass, subpattern, subroutine, subscript, substitution, substring, superclass, superuser, SV, switch, switch cluster, switch statement, symbol, symbolic debugger, symbolic link, symbolic reference, symbol table, synchronous, syntactic sugar, syntax, syntax tree, syscall =item T taint checks, tainted, taint mode, TCP, term, terminator, ternary, text, thread, tie, titlecase, TMTOWTDI, token, tokener, tokenizing, toolbox approach, topic, transliterate, trigger, trinary, troff, true, truncating, type, type casting, typedef, typed lexical, typeglob, typemap =item U UDP, UID, umask, unary operator, Unicode, Unix, uppercase =item V value, variable, variable interpolation, variadic, vector, virtual, void context, v-string =item W warning, watch expression, weak reference, whitespace, word, working directory, wrapper, WYSIWYG =item X XS, XSUB =item Y yacc =item Z zero width, zombie =back =item AUTHOR AND COPYRIGHT =back =head2 perlembed - how to embed perl in your C program =over 4 =item DESCRIPTION =over 4 =item PREAMBLE B<Use C from Perl?>, B<Use a Unix program from Perl?>, B<Use Perl from Perl?>, B<Use C from C?>, B<Use Perl from C?> =item ROADMAP =item Compiling your C program =item Adding a Perl interpreter to your C program =item Calling a Perl subroutine from your C program =item Evaluating a Perl statement from your C program =item Performing Perl pattern matches and substitutions from your C program =item Fiddling with the Perl stack from your C program =item Maintaining a persistent interpreter =item Execution of END blocks =item $0 assignments =item Maintaining multiple interpreter instances =item Using Perl modules, which themselves use C libraries, from your C program =item Using embedded Perl with POSIX locales =back =item Hiding Perl_ =item MORAL =item AUTHOR =item COPYRIGHT =back =head2 perldebguts - Guts of Perl debugging =over 4 =item DESCRIPTION =item Debugger Internals =over 4 =item Writing Your Own Debugger =back =item Frame Listing Output Examples =item Debugging Regular Expressions =over 4 =item Compile-time Output C<anchored> I<STRING> C<at> I<POS>, C<floating> I<STRING> C<at> I<POS1..POS2>, C<matching floating/anchored>, C<minlen>, C<stclass> I<TYPE>, C<noscan>, C<isall>, C<GPOS>, C<plus>, C<implicit>, C<with eval>, C<anchored(TYPE)> =item Types of Nodes =item Run-time Output =back =item Debugging Perl Memory Usage =over 4 =item Using C<$ENV{PERL_DEBUG_MSTATS}> C<buckets SMALLEST(APPROX)..GREATEST(APPROX)>, Free/Used, C<Total sbrk(): SBRKed/SBRKs:CONTINUOUS>, C<pad: 0>, C<heads: 2192>, C<chain: 0>, C<tail: 6144> =back =item SEE ALSO =back =head2 perlxstut - Tutorial for writing XSUBs =over 4 =item DESCRIPTION =item SPECIAL NOTES =over 4 =item make =item Version caveat =item Dynamic Loading versus Static Loading =item Threads and PERL_NO_GET_CONTEXT =back =item TUTORIAL =over 4 =item EXAMPLE 1 =item EXAMPLE 2 =item What has gone on? =item Writing good test scripts =item EXAMPLE 3 =item What's new here? =item Input and Output Parameters =item The XSUBPP Program =item The TYPEMAP file =item Warning about Output Arguments =item EXAMPLE 4 =item What has happened here? =item Anatomy of .xs file =item Getting the fat out of XSUBs =item More about XSUB arguments =item The Argument Stack =item Extending your Extension =item Documenting your Extension =item Installing your Extension =item EXAMPLE 5 =item New Things in this Example =item EXAMPLE 6 =item New Things in this Example =item EXAMPLE 7 (Coming Soon) =item EXAMPLE 8 (Coming Soon) =item EXAMPLE 9 Passing open files to XSes =item Troubleshooting these Examples =back =item See also =item Author =over 4 =item Last Changed =back =back =head2 perlxs - XS language reference manual =over 4 =item DESCRIPTION =over 4 =item Introduction =item On The Road =item The Anatomy of an XSUB =item The Argument Stack =item The RETVAL Variable =item Returning SVs, AVs and HVs through RETVAL =item The MODULE Keyword =item The PACKAGE Keyword =item The PREFIX Keyword =item The OUTPUT: Keyword =item The NO_OUTPUT Keyword =item The CODE: Keyword =item The INIT: Keyword =item The NO_INIT Keyword =item The TYPEMAP: Keyword =item Initializing Function Parameters =item Default Parameter Values =item The PREINIT: Keyword =item The SCOPE: Keyword =item The INPUT: Keyword =item The IN/OUTLIST/IN_OUTLIST/OUT/IN_OUT Keywords =item The C<length(NAME)> Keyword =item Variable-length Parameter Lists =item The C_ARGS: Keyword =item The PPCODE: Keyword =item Returning Undef And Empty Lists =item The REQUIRE: Keyword =item The CLEANUP: Keyword =item The POSTCALL: Keyword =item The BOOT: Keyword =item The VERSIONCHECK: Keyword =item The PROTOTYPES: Keyword =item The PROTOTYPE: Keyword =item The ALIAS: Keyword =item The OVERLOAD: Keyword =item The FALLBACK: Keyword =item The INTERFACE: Keyword =item The INTERFACE_MACRO: Keyword =item The INCLUDE: Keyword =item The INCLUDE_COMMAND: Keyword =item The CASE: Keyword =item The EXPORT_XSUB_SYMBOLS: Keyword =item The & Unary Operator =item Inserting POD, Comments and C Preprocessor Directives =item Using XS With C++ =item Interface Strategy =item Perl Objects And C Structures =item Safely Storing Static Data in XS MY_CXT_KEY, typedef my_cxt_t, START_MY_CXT, MY_CXT_INIT, dMY_CXT, MY_CXT, aMY_CXT/pMY_CXT, MY_CXT_CLONE, MY_CXT_INIT_INTERP(my_perl), dMY_CXT_INTERP(my_perl) =item Thread-aware system interfaces =back =item EXAMPLES =item CAVEATS Non-locale-aware XS code, Locale-aware XS code =item XS VERSION =item AUTHOR =back =head2 perlxstypemap - Perl XS C/Perl type mapping =over 4 =item DESCRIPTION =over 4 =item Anatomy of a typemap =item The Role of the typemap File in Your Distribution =item Sharing typemaps Between CPAN Distributions =item Writing typemap Entries =item Full Listing of Core Typemaps T_SV, T_SVREF, T_SVREF_FIXED, T_AVREF, T_AVREF_REFCOUNT_FIXED, T_HVREF, T_HVREF_REFCOUNT_FIXED, T_CVREF, T_CVREF_REFCOUNT_FIXED, T_SYSRET, T_UV, T_IV, T_INT, T_ENUM, T_BOOL, T_U_INT, T_SHORT, T_U_SHORT, T_LONG, T_U_LONG, T_CHAR, T_U_CHAR, T_FLOAT, T_NV, T_DOUBLE, T_PV, T_PTR, T_PTRREF, T_PTROBJ, T_REF_IV_REF, T_REF_IV_PTR, T_PTRDESC, T_REFREF, T_REFOBJ, T_OPAQUEPTR, T_OPAQUE, Implicit array, T_PACKED, T_PACKEDARRAY, T_DATAUNIT, T_CALLBACK, T_ARRAY, T_STDIO, T_INOUT, T_IN, T_OUT =back =back =head2 perlclib - Internal replacements for standard C library functions =over 4 =item DESCRIPTION =over 4 =item Conventions C<t>, C<p>, C<n>, C<s> =item File Operations =item File Input and Output =item File Positioning =item Memory Management and String Handling =item Character Class Tests =item F<stdlib.h> functions =item Miscellaneous functions =back =item SEE ALSO =back =head2 perlguts - Introduction to the Perl API =over 4 =item DESCRIPTION =item Variables =over 4 =item Datatypes =item What is an "IV"? =item Working with SVs =item Offsets =item What's Really Stored in an SV? =item Working with AVs =item Working with HVs =item Hash API Extensions =item AVs, HVs and undefined values =item References =item Blessed References and Class Objects =item Creating New Variables GV_ADDMULTI, GV_ADDWARN =item Reference Counts and Mortality =item Stashes and Globs =item Double-Typed SVs =item Read-Only Values =item Copy on Write =item Magic Variables =item Assigning Magic =item Magic Virtual Tables =item Finding Magic =item Understanding the Magic of Tied Hashes and Arrays =item Localizing changes C<SAVEINT(int i)>, C<SAVEIV(IV i)>, C<SAVEI32(I32 i)>, C<SAVELONG(long i)>, C<SAVESPTR(s)>, C<SAVEPPTR(p)>, C<SAVEFREESV(SV *sv)>, C<SAVEMORTALIZESV(SV *sv)>, C<SAVEFREEOP(OP *op)>, C<SAVEFREEPV(p)>, C<SAVECLEARSV(SV *sv)>, C<SAVEDELETE(HV *hv, char *key, I32 length)>, C<SAVEDESTRUCTOR(DESTRUCTORFUNC_NOCONTEXT_t f, void *p)>, C<SAVEDESTRUCTOR_X(DESTRUCTORFUNC_t f, void *p)>, C<SAVESTACK_POS()>, C<SV* save_scalar(GV *gv)>, C<AV* save_ary(GV *gv)>, C<HV* save_hash(GV *gv)>, C<void save_item(SV *item)>, C<void save_list(SV **sarg, I32 maxsarg)>, C<SV* save_svref(SV **sptr)>, C<void save_aptr(AV **aptr)>, C<void save_hptr(HV **hptr)> =back =item Subroutines =over 4 =item XSUBs and the Argument Stack =item Autoloading with XSUBs =item Calling Perl Routines from within C Programs =item Putting a C value on Perl stack =item Scratchpads =item Scratchpads and recursion =back =item Memory Allocation =over 4 =item Allocation =item Reallocation =item Moving =back =item PerlIO =item Compiled code =over 4 =item Code tree =item Examining the tree =item Compile pass 1: check routines =item Compile pass 1a: constant folding =item Compile pass 2: context propagation =item Compile pass 3: peephole optimization =item Pluggable runops =item Compile-time scope hooks C<void bhk_start(pTHX_ int full)>, C<void bhk_pre_end(pTHX_ OP **o)>, C<void bhk_post_end(pTHX_ OP **o)>, C<void bhk_eval(pTHX_ OP *const o)> =back =item Examining internal data structures with the C<dump> functions =item How multiple interpreters and concurrency are supported =over 4 =item Background and PERL_IMPLICIT_CONTEXT =item So what happened to dTHR? =item How do I use all this in extensions? =item Should I do anything special if I call perl from multiple threads? =item Future Plans and PERL_IMPLICIT_SYS =back =item Internal Functions =over 4 =item Formatted Printing of IVs, UVs, and NVs =item Formatted Printing of SVs =item Formatted Printing of Strings =item Formatted Printing of C<Size_t> and C<SSize_t> =item Pointer-To-Integer and Integer-To-Pointer =item Exception Handling =item Source Documentation =item Backwards compatibility =back =item Unicode Support =over 4 =item What B<is> Unicode, anyway? =item How can I recognise a UTF-8 string? =item How does UTF-8 represent Unicode characters? =item How does Perl store UTF-8 strings? =item How do I convert a string to UTF-8? =item How do I compare strings? =item Is there anything else I need to know? =back =item Custom Operators xop_name, xop_desc, xop_class, OA_BASEOP, OA_UNOP, OA_BINOP, OA_LOGOP, OA_LISTOP, OA_PMOP, OA_SVOP, OA_PADOP, OA_PVOP_OR_SVOP, OA_LOOP, OA_COP, xop_peep =item Stacks =over 4 =item Value Stack =item Mark Stack =item Temporaries Stack =item Save Stack =item Scope Stack =back =item Dynamic Scope and the Context Stack =over 4 =item Introduction to the context stack =item Pushing contexts =item Popping contexts =item Redoing contexts =back =item Slab-based operator allocation =item AUTHORS =item SEE ALSO =back =head2 perlcall - Perl calling conventions from C =over 4 =item DESCRIPTION An Error Handler, An Event-Driven Program =item THE CALL_ FUNCTIONS call_sv, call_pv, call_method, call_argv =item FLAG VALUES =over 4 =item G_VOID =item G_SCALAR =item G_ARRAY =item G_DISCARD =item G_NOARGS =item G_EVAL =item G_KEEPERR =item Determining the Context =back =item EXAMPLES =over 4 =item No Parameters, Nothing Returned =item Passing Parameters =item Returning a Scalar =item Returning a List of Values =item Returning a List in Scalar Context =item Returning Data from Perl via the Parameter List =item Using G_EVAL =item Using G_KEEPERR =item Using call_sv =item Using call_argv =item Using call_method =item Using GIMME_V =item Using Perl to Dispose of Temporaries =item Strategies for Storing Callback Context Information 1. Ignore the problem - Allow only 1 callback, 2. Create a sequence of callbacks - hard wired limit, 3. Use a parameter to map to the Perl callback =item Alternate Stack Manipulation =item Creating and Calling an Anonymous Subroutine in C =back =item LIGHTWEIGHT CALLBACKS =item SEE ALSO =item AUTHOR =item DATE =back =head2 perlmroapi - Perl method resolution plugin interface =over 4 =item DESCRIPTION resolve, name, length, kflags, hash =item Callbacks =item Caching =item Examples =item AUTHORS =back =head2 perlreapi - Perl regular expression plugin interface =over 4 =item DESCRIPTION =item Callbacks =over 4 =item comp C</m> - RXf_PMf_MULTILINE, C</s> - RXf_PMf_SINGLELINE, C</i> - RXf_PMf_FOLD, C</x> - RXf_PMf_EXTENDED, C</p> - RXf_PMf_KEEPCOPY, Character set, RXf_SPLIT, RXf_SKIPWHITE, RXf_START_ONLY, RXf_WHITE, RXf_NULL, RXf_NO_INPLACE_SUBST =item exec rx, sv, strbeg, strend, stringarg, minend, data, flags =item intuit =item checkstr =item free =item Numbered capture callbacks =item Named capture callbacks =item qr_package =item dupe =item op_comp =back =item The REGEXP structure =over 4 =item C<engine> =item C<mother_re> =item C<extflags> =item C<minlen> C<minlenret> =item C<gofs> =item C<substrs> =item C<nparens>, C<lastparen>, and C<lastcloseparen> =item C<intflags> =item C<pprivate> =item C<offs> =item C<precomp> C<prelen> =item C<paren_names> =item C<substrs> =item C<subbeg> C<sublen> C<saved_copy> C<suboffset> C<subcoffset> =item C<wrapped> C<wraplen> =item C<seen_evals> =item C<refcnt> =back =item HISTORY =item AUTHORS =item LICENSE =back =head2 perlreguts - Description of the Perl regular expression engine. =over 4 =item DESCRIPTION =item OVERVIEW =over 4 =item A quick note on terms =item What is a regular expression engine? =item Structure of a Regexp Program C<regnode_1>, C<regnode_2>, C<regnode_string>, C<regnode_charclass>, C<regnode_charclass_posixl> =back =item Process Overview A. Compilation, 1. Parsing, 2. Peep-hole optimisation and analysis, B. Execution, 3. Start position and no-match optimisations, 4. Program execution =over 4 =item Compilation anchored fixed strings, floating fixed strings, minimum and maximum length requirements, start class, Beginning/End of line positions =item Execution =back =item MISCELLANEOUS =over 4 =item Unicode and Localisation Support =item Base Structures C<offsets>, C<regstclass>, C<data>, C<program> =back =item SEE ALSO =item AUTHOR =item LICENCE =item REFERENCES =back =head2 perlapi - autogenerated documentation for the perl public API =over 4 =item DESCRIPTION X<Perl API> X<API> X<api> =item Array Manipulation Functions av_clear X<av_clear>, av_create_and_push X<av_create_and_push>, av_create_and_unshift_one X<av_create_and_unshift_one>, av_delete X<av_delete>, av_exists X<av_exists>, av_extend X<av_extend>, av_fetch X<av_fetch>, AvFILL X<AvFILL>, av_fill X<av_fill>, av_len X<av_len>, av_make X<av_make>, av_pop X<av_pop>, av_push X<av_push>, av_shift X<av_shift>, av_store X<av_store>, av_tindex X<av_tindex>, av_top_index X<av_top_index>, av_undef X<av_undef>, av_unshift X<av_unshift>, get_av X<get_av>, newAV X<newAV>, sortsv X<sortsv> =item Callback Functions call_argv X<call_argv>, call_method X<call_method>, call_pv X<call_pv>, call_sv X<call_sv>, ENTER X<ENTER>, ENTER_with_name X<ENTER_with_name>, eval_pv X<eval_pv>, eval_sv X<eval_sv>, FREETMPS X<FREETMPS>, LEAVE X<LEAVE>, LEAVE_with_name X<LEAVE_with_name>, SAVETMPS X<SAVETMPS> =item Character case changing toFOLD X<toFOLD>, toFOLD_utf8 X<toFOLD_utf8>, toFOLD_utf8_safe X<toFOLD_utf8_safe>, toFOLD_uvchr X<toFOLD_uvchr>, toLOWER X<toLOWER>, toLOWER_L1 X<toLOWER_L1>, toLOWER_LC X<toLOWER_LC>, toLOWER_utf8 X<toLOWER_utf8>, toLOWER_utf8_safe X<toLOWER_utf8_safe>, toLOWER_uvchr X<toLOWER_uvchr>, toTITLE X<toTITLE>, toTITLE_utf8 X<toTITLE_utf8>, toTITLE_utf8_safe X<toTITLE_utf8_safe>, toTITLE_uvchr X<toTITLE_uvchr>, toUPPER X<toUPPER>, toUPPER_utf8 X<toUPPER_utf8>, toUPPER_utf8_safe X<toUPPER_utf8_safe>, toUPPER_uvchr X<toUPPER_uvchr>, WIDEST_UTYPE X<WIDEST_UTYPE> =item Character classification isALPHA X<isALPHA>, isALPHANUMERIC X<isALPHANUMERIC>, isASCII X<isASCII>, isBLANK X<isBLANK>, isCNTRL X<isCNTRL>, isDIGIT X<isDIGIT>, isGRAPH X<isGRAPH>, isIDCONT X<isIDCONT>, isIDFIRST X<isIDFIRST>, isLOWER X<isLOWER>, isOCTAL X<isOCTAL>, isPRINT X<isPRINT>, isPSXSPC X<isPSXSPC>, isPUNCT X<isPUNCT>, isSPACE X<isSPACE>, isUPPER X<isUPPER>, isWORDCHAR X<isWORDCHAR>, isXDIGIT X<isXDIGIT> =item Cloning an interpreter perl_clone X<perl_clone> =item Compile-time scope hooks BhkDISABLE X<BhkDISABLE>, BhkENABLE X<BhkENABLE>, BhkENTRY_set X<BhkENTRY_set>, blockhook_register X<blockhook_register> =item COP Hint Hashes cophh_2hv X<cophh_2hv>, cophh_copy X<cophh_copy>, cophh_delete_pv X<cophh_delete_pv>, cophh_delete_pvn X<cophh_delete_pvn>, cophh_delete_pvs X<cophh_delete_pvs>, cophh_delete_sv X<cophh_delete_sv>, cophh_fetch_pv X<cophh_fetch_pv>, cophh_fetch_pvn X<cophh_fetch_pvn>, cophh_fetch_pvs X<cophh_fetch_pvs>, cophh_fetch_sv X<cophh_fetch_sv>, cophh_free X<cophh_free>, cophh_new_empty X<cophh_new_empty>, cophh_store_pv X<cophh_store_pv>, cophh_store_pvn X<cophh_store_pvn>, cophh_store_pvs X<cophh_store_pvs>, cophh_store_sv X<cophh_store_sv> =item COP Hint Reading cop_hints_2hv X<cop_hints_2hv>, cop_hints_fetch_pv X<cop_hints_fetch_pv>, cop_hints_fetch_pvn X<cop_hints_fetch_pvn>, cop_hints_fetch_pvs X<cop_hints_fetch_pvs>, cop_hints_fetch_sv X<cop_hints_fetch_sv>, CopLABEL X<CopLABEL>, CopLABEL_len X<CopLABEL_len>, CopLABEL_len_flags X<CopLABEL_len_flags> =item Custom Operators custom_op_register X<custom_op_register>, Perl_custom_op_xop X<Perl_custom_op_xop>, XopDISABLE X<XopDISABLE>, XopENABLE X<XopENABLE>, XopENTRY X<XopENTRY>, XopENTRYCUSTOM X<XopENTRYCUSTOM>, XopENTRY_set X<XopENTRY_set>, XopFLAGS X<XopFLAGS> =item CV Manipulation Functions caller_cx X<caller_cx>, CvSTASH X<CvSTASH>, find_runcv X<find_runcv>, get_cv X<get_cv>, get_cvn_flags X<get_cvn_flags> =item C<xsubpp> variables and internal functions ax X<ax>, CLASS X<CLASS>, dAX X<dAX>, dAXMARK X<dAXMARK>, dITEMS X<dITEMS>, dUNDERBAR X<dUNDERBAR>, dXSARGS X<dXSARGS>, dXSI32 X<dXSI32>, items X<items>, ix X<ix>, RETVAL X<RETVAL>, ST X<ST>, THIS X<THIS>, UNDERBAR X<UNDERBAR>, XS X<XS>, XS_EXTERNAL X<XS_EXTERNAL>, XS_INTERNAL X<XS_INTERNAL> =item Debugging Utilities dump_all X<dump_all>, dump_packsubs X<dump_packsubs>, op_class X<op_class>, op_dump X<op_dump>, sv_dump X<sv_dump> =item Display and Dump functions pv_display X<pv_display>, pv_escape X<pv_escape>, pv_pretty X<pv_pretty> =item Embedding Functions cv_clone X<cv_clone>, cv_name X<cv_name>, cv_undef X<cv_undef>, find_rundefsv X<find_rundefsv>, find_rundefsvoffset X<find_rundefsvoffset>, intro_my X<intro_my>, load_module X<load_module>, my_exit X<my_exit>, newPADNAMELIST X<newPADNAMELIST>, newPADNAMEouter X<newPADNAMEouter>, newPADNAMEpvn X<newPADNAMEpvn>, nothreadhook X<nothreadhook>, pad_add_anon X<pad_add_anon>, pad_add_name_pv X<pad_add_name_pv>, pad_add_name_pvn X<pad_add_name_pvn>, pad_add_name_sv X<pad_add_name_sv>, pad_alloc X<pad_alloc>, pad_findmy_pv X<pad_findmy_pv>, pad_findmy_pvn X<pad_findmy_pvn>, pad_findmy_sv X<pad_findmy_sv>, padnamelist_fetch X<padnamelist_fetch>, padnamelist_store X<padnamelist_store>, pad_setsv X<pad_setsv>, pad_sv X<pad_sv>, pad_tidy X<pad_tidy>, perl_alloc X<perl_alloc>, perl_construct X<perl_construct>, perl_destruct X<perl_destruct>, perl_free X<perl_free>, perl_parse X<perl_parse>, perl_run X<perl_run>, require_pv X<require_pv> =item Exception Handling (simple) Macros dXCPT X<dXCPT>, XCPT_CATCH X<XCPT_CATCH>, XCPT_RETHROW X<XCPT_RETHROW>, XCPT_TRY_END X<XCPT_TRY_END>, XCPT_TRY_START X<XCPT_TRY_START> =item Functions in file inline.h av_count X<av_count> =item Functions in file vutil.c new_version X<new_version>, prescan_version X<prescan_version>, scan_version X<scan_version>, upg_version X<upg_version>, vcmp X<vcmp>, vnormal X<vnormal>, vnumify X<vnumify>, vstringify X<vstringify>, vverify X<vverify>, The SV is an HV or a reference to an HV, The hash contains a "version" key, The "version" key has a reference to an AV as its value =item "Gimme" Values G_ARRAY X<G_ARRAY>, G_DISCARD X<G_DISCARD>, G_EVAL X<G_EVAL>, GIMME X<GIMME>, GIMME_V X<GIMME_V>, G_NOARGS X<G_NOARGS>, G_SCALAR X<G_SCALAR>, G_VOID X<G_VOID> =item Global Variables PL_check X<PL_check>, PL_keyword_plugin X<PL_keyword_plugin>, PL_phase X<PL_phase> =item GV Functions GvAV X<GvAV>, gv_const_sv X<gv_const_sv>, GvCV X<GvCV>, gv_fetchmeth X<gv_fetchmeth>, gv_fetchmethod_autoload X<gv_fetchmethod_autoload>, gv_fetchmeth_autoload X<gv_fetchmeth_autoload>, gv_fetchmeth_pv X<gv_fetchmeth_pv>, gv_fetchmeth_pvn X<gv_fetchmeth_pvn>, gv_fetchmeth_pvn_autoload X<gv_fetchmeth_pvn_autoload>, gv_fetchmeth_pv_autoload X<gv_fetchmeth_pv_autoload>, gv_fetchmeth_sv X<gv_fetchmeth_sv>, gv_fetchmeth_sv_autoload X<gv_fetchmeth_sv_autoload>, GvHV X<GvHV>, gv_init X<gv_init>, gv_init_pv X<gv_init_pv>, gv_init_pvn X<gv_init_pvn>, gv_init_sv X<gv_init_sv>, gv_stashpv X<gv_stashpv>, gv_stashpvn X<gv_stashpvn>, gv_stashpvs X<gv_stashpvs>, gv_stashsv X<gv_stashsv>, GvSV X<GvSV>, save_gp X<save_gp>, setdefout X<setdefout> =item Handy Values C_ARRAY_END X<C_ARRAY_END>, C_ARRAY_LENGTH X<C_ARRAY_LENGTH>, cBOOL X<cBOOL>, Nullav X<Nullav>, Nullch X<Nullch>, Nullcv X<Nullcv>, Nullhv X<Nullhv>, Nullsv X<Nullsv>, STR_WITH_LEN X<STR_WITH_LEN>, __ASSERT_ X<__ASSERT_> =item Hash Manipulation Functions cop_fetch_label X<cop_fetch_label>, cop_store_label X<cop_store_label>, get_hv X<get_hv>, HEf_SVKEY X<HEf_SVKEY>, HeHASH X<HeHASH>, HeKEY X<HeKEY>, HeKLEN X<HeKLEN>, HePV X<HePV>, HeSVKEY X<HeSVKEY>, HeSVKEY_force X<HeSVKEY_force>, HeSVKEY_set X<HeSVKEY_set>, HeUTF8 X<HeUTF8>, HeVAL X<HeVAL>, hv_assert X<hv_assert>, hv_bucket_ratio X<hv_bucket_ratio>, hv_clear X<hv_clear>, hv_clear_placeholders X<hv_clear_placeholders>, hv_copy_hints_hv X<hv_copy_hints_hv>, hv_delete X<hv_delete>, hv_delete_ent X<hv_delete_ent>, HvENAME X<HvENAME>, HvENAMELEN X<HvENAMELEN>, HvENAMEUTF8 X<HvENAMEUTF8>, hv_exists X<hv_exists>, hv_exists_ent X<hv_exists_ent>, hv_fetch X<hv_fetch>, hv_fetchs X<hv_fetchs>, hv_fetch_ent X<hv_fetch_ent>, HvFILL X<HvFILL>, hv_fill X<hv_fill>, hv_iterinit X<hv_iterinit>, hv_iterkey X<hv_iterkey>, hv_iterkeysv X<hv_iterkeysv>, hv_iternext X<hv_iternext>, hv_iternextsv X<hv_iternextsv>, hv_iternext_flags X<hv_iternext_flags>, hv_iterval X<hv_iterval>, hv_magic X<hv_magic>, HvNAME X<HvNAME>, HvNAMELEN X<HvNAMELEN>, HvNAMEUTF8 X<HvNAMEUTF8>, hv_scalar X<hv_scalar>, hv_store X<hv_store>, hv_stores X<hv_stores>, hv_store_ent X<hv_store_ent>, hv_undef X<hv_undef>, newHV X<newHV> =item Hook manipulation wrap_op_checker X<wrap_op_checker> =item Lexer interface lex_bufutf8 X<lex_bufutf8>, lex_discard_to X<lex_discard_to>, lex_grow_linestr X<lex_grow_linestr>, lex_next_chunk X<lex_next_chunk>, lex_peek_unichar X<lex_peek_unichar>, lex_read_space X<lex_read_space>, lex_read_to X<lex_read_to>, lex_read_unichar X<lex_read_unichar>, lex_start X<lex_start>, lex_stuff_pv X<lex_stuff_pv>, lex_stuff_pvn X<lex_stuff_pvn>, lex_stuff_pvs X<lex_stuff_pvs>, lex_stuff_sv X<lex_stuff_sv>, lex_unstuff X<lex_unstuff>, parse_arithexpr X<parse_arithexpr>, parse_barestmt X<parse_barestmt>, parse_block X<parse_block>, parse_fullexpr X<parse_fullexpr>, parse_fullstmt X<parse_fullstmt>, parse_label X<parse_label>, parse_listexpr X<parse_listexpr>, parse_stmtseq X<parse_stmtseq>, parse_subsignature X<parse_subsignature>, parse_termexpr X<parse_termexpr>, PL_parser X<PL_parser>, PL_parser-E<gt>bufend X<PL_parser-E<gt>bufend>, PL_parser-E<gt>bufptr X<PL_parser-E<gt>bufptr>, PL_parser-E<gt>linestart X<PL_parser-E<gt>linestart>, PL_parser-E<gt>linestr X<PL_parser-E<gt>linestr>, wrap_keyword_plugin X<wrap_keyword_plugin> =item Locale-related functions and macros DECLARATION_FOR_LC_NUMERIC_MANIPULATION X<DECLARATION_FOR_LC_NUMERIC_MANIPULATION>, IN_LOCALE X<IN_LOCALE>, IN_LOCALE_COMPILETIME X<IN_LOCALE_COMPILETIME>, IN_LOCALE_RUNTIME X<IN_LOCALE_RUNTIME>, Perl_langinfo X<Perl_langinfo>, Perl_setlocale X<Perl_setlocale>, RESTORE_LC_NUMERIC X<RESTORE_LC_NUMERIC>, STORE_LC_NUMERIC_FORCE_TO_UNDERLYING X<STORE_LC_NUMERIC_FORCE_TO_UNDERLYING>, STORE_LC_NUMERIC_SET_TO_NEEDED X<STORE_LC_NUMERIC_SET_TO_NEEDED>, STORE_LC_NUMERIC_SET_TO_NEEDED_IN X<STORE_LC_NUMERIC_SET_TO_NEEDED_IN>, switch_to_global_locale X<switch_to_global_locale>, L<POSIX::localeconv|POSIX/localeconv>, L<I18N::Langinfo>, items C<CRNCYSTR> and C<THOUSEP>, L<perlapi/Perl_langinfo>, items C<CRNCYSTR> and C<THOUSEP>, sync_locale X<sync_locale>, WITH_LC_NUMERIC_SET_TO_NEEDED X<WITH_LC_NUMERIC_SET_TO_NEEDED>, WITH_LC_NUMERIC_SET_TO_NEEDED_IN X<WITH_LC_NUMERIC_SET_TO_NEEDED_IN> =item Magical Functions mg_clear X<mg_clear>, mg_copy X<mg_copy>, mg_find X<mg_find>, mg_findext X<mg_findext>, mg_free X<mg_free>, mg_freeext X<mg_freeext>, mg_free_type X<mg_free_type>, mg_get X<mg_get>, mg_length X<mg_length>, mg_magical X<mg_magical>, mg_set X<mg_set>, SvGETMAGIC X<SvGETMAGIC>, SvLOCK X<SvLOCK>, SvSETMAGIC X<SvSETMAGIC>, SvSetMagicSV X<SvSetMagicSV>, SvSetMagicSV_nosteal X<SvSetMagicSV_nosteal>, SvSetSV X<SvSetSV>, SvSetSV_nosteal X<SvSetSV_nosteal>, SvSHARE X<SvSHARE>, sv_string_from_errnum X<sv_string_from_errnum>, SvUNLOCK X<SvUNLOCK> =item Memory Management Copy X<Copy>, CopyD X<CopyD>, Move X<Move>, MoveD X<MoveD>, Newx X<Newx>, Newxc X<Newxc>, Newxz X<Newxz>, Poison X<Poison>, PoisonFree X<PoisonFree>, PoisonNew X<PoisonNew>, PoisonWith X<PoisonWith>, Renew X<Renew>, Renewc X<Renewc>, Safefree X<Safefree>, savepv X<savepv>, savepvn X<savepvn>, savepvs X<savepvs>, savesharedpv X<savesharedpv>, savesharedpvn X<savesharedpvn>, savesharedpvs X<savesharedpvs>, savesharedsvpv X<savesharedsvpv>, savesvpv X<savesvpv>, StructCopy X<StructCopy>, Zero X<Zero>, ZeroD X<ZeroD> =item Miscellaneous Functions dump_c_backtrace X<dump_c_backtrace>, fbm_compile X<fbm_compile>, fbm_instr X<fbm_instr>, foldEQ X<foldEQ>, foldEQ_locale X<foldEQ_locale>, form X<form>, getcwd_sv X<getcwd_sv>, get_c_backtrace_dump X<get_c_backtrace_dump>, ibcmp X<ibcmp>, ibcmp_locale X<ibcmp_locale>, instr X<instr>, IS_SAFE_SYSCALL X<IS_SAFE_SYSCALL>, is_safe_syscall X<is_safe_syscall>, LIKELY X<LIKELY>, memCHRs X<memCHRs>, memEQ X<memEQ>, memEQs X<memEQs>, memNE X<memNE>, memNEs X<memNEs>, mess X<mess>, mess_sv X<mess_sv>, my_snprintf X<my_snprintf>, my_sprintf X<my_sprintf>, my_strlcat X<my_strlcat>, my_strlcpy X<my_strlcpy>, my_strnlen X<my_strnlen>, my_vsnprintf X<my_vsnprintf>, ninstr X<ninstr>, PERL_SYS_INIT X<PERL_SYS_INIT>, PERL_SYS_INIT3 X<PERL_SYS_INIT3>, PERL_SYS_TERM X<PERL_SYS_TERM>, READ_XDIGIT X<READ_XDIGIT>, rninstr X<rninstr>, STMT_START X<STMT_START>, strEQ X<strEQ>, strGE X<strGE>, strGT X<strGT>, strLE X<strLE>, strLT X<strLT>, strNE X<strNE>, strnEQ X<strnEQ>, strnNE X<strnNE>, sv_destroyable X<sv_destroyable>, sv_nosharing X<sv_nosharing>, UNLIKELY X<UNLIKELY>, vmess X<vmess> =item MRO Functions mro_get_linear_isa X<mro_get_linear_isa>, mro_method_changed_in X<mro_method_changed_in>, mro_register X<mro_register> =item Multicall Functions dMULTICALL X<dMULTICALL>, MULTICALL X<MULTICALL>, POP_MULTICALL X<POP_MULTICALL>, PUSH_MULTICALL X<PUSH_MULTICALL> =item Numeric functions grok_bin X<grok_bin>, grok_hex X<grok_hex>, grok_infnan X<grok_infnan>, grok_number X<grok_number>, grok_number_flags X<grok_number_flags>, GROK_NUMERIC_RADIX X<GROK_NUMERIC_RADIX>, grok_numeric_radix X<grok_numeric_radix>, grok_oct X<grok_oct>, isinfnan X<isinfnan>, IS_NUMBER_GREATER_THAN_UV_MAX X<IS_NUMBER_GREATER_THAN_UV_MAX> bool IS_NUMBER_GREATER_THAN_UV_MAX, IS_NUMBER_INFINITY X<IS_NUMBER_INFINITY> bool IS_NUMBER_INFINITY, IS_NUMBER_IN_UV X<IS_NUMBER_IN_UV> bool IS_NUMBER_IN_UV, IS_NUMBER_NAN X<IS_NUMBER_NAN> bool IS_NUMBER_NAN, IS_NUMBER_NEG X<IS_NUMBER_NEG> bool IS_NUMBER_NEG, IS_NUMBER_NOT_INT X<IS_NUMBER_NOT_INT>, my_strtod X<my_strtod>, PERL_ABS X<PERL_ABS>, PERL_INT_MAX X<PERL_INT_MAX>, Perl_signbit X<Perl_signbit>, scan_bin X<scan_bin>, scan_hex X<scan_hex>, scan_oct X<scan_oct>, Strtod X<Strtod>, Strtol X<Strtol>, Strtoul X<Strtoul> =item Obsolete backwards compatibility functions custom_op_desc X<custom_op_desc>, custom_op_name X<custom_op_name>, gv_fetchmethod X<gv_fetchmethod>, is_utf8_char X<is_utf8_char>, is_utf8_char_buf X<is_utf8_char_buf>, pack_cat X<pack_cat>, pad_compname_type X<pad_compname_type>, sv_2pvbyte_nolen X<sv_2pvbyte_nolen>, sv_2pvutf8_nolen X<sv_2pvutf8_nolen>, sv_2pv_nolen X<sv_2pv_nolen>, sv_catpvn_mg X<sv_catpvn_mg>, sv_catsv_mg X<sv_catsv_mg>, sv_force_normal X<sv_force_normal>, sv_iv X<sv_iv>, sv_nolocking X<sv_nolocking>, sv_nounlocking X<sv_nounlocking>, sv_nv X<sv_nv>, sv_pv X<sv_pv>, sv_pvbyte X<sv_pvbyte>, sv_pvbyten X<sv_pvbyten>, sv_pvn X<sv_pvn>, sv_pvutf8 X<sv_pvutf8>, sv_pvutf8n X<sv_pvutf8n>, sv_taint X<sv_taint>, sv_unref X<sv_unref>, sv_usepvn X<sv_usepvn>, sv_usepvn_mg X<sv_usepvn_mg>, sv_uv X<sv_uv>, unpack_str X<unpack_str>, utf8_to_uvchr X<utf8_to_uvchr> =item Optree construction newASSIGNOP X<newASSIGNOP>, newBINOP X<newBINOP>, newCONDOP X<newCONDOP>, newDEFSVOP X<newDEFSVOP>, newFOROP X<newFOROP>, newGIVENOP X<newGIVENOP>, newGVOP X<newGVOP>, newLISTOP X<newLISTOP>, newLOGOP X<newLOGOP>, newLOOPEX X<newLOOPEX>, newLOOPOP X<newLOOPOP>, newMETHOP X<newMETHOP>, newMETHOP_named X<newMETHOP_named>, newNULLLIST X<newNULLLIST>, newOP X<newOP>, newPADOP X<newPADOP>, newPMOP X<newPMOP>, newPVOP X<newPVOP>, newRANGE X<newRANGE>, newSLICEOP X<newSLICEOP>, newSTATEOP X<newSTATEOP>, newSVOP X<newSVOP>, newUNOP X<newUNOP>, newUNOP_AUX X<newUNOP_AUX>, newWHENOP X<newWHENOP>, newWHILEOP X<newWHILEOP> =item Optree Manipulation Functions alloccopstash X<alloccopstash>, block_end X<block_end>, block_start X<block_start>, ck_entersub_args_list X<ck_entersub_args_list>, ck_entersub_args_proto X<ck_entersub_args_proto>, ck_entersub_args_proto_or_list X<ck_entersub_args_proto_or_list>, cv_const_sv X<cv_const_sv>, cv_get_call_checker X<cv_get_call_checker>, cv_get_call_checker_flags X<cv_get_call_checker_flags>, cv_set_call_checker X<cv_set_call_checker>, cv_set_call_checker_flags X<cv_set_call_checker_flags>, LINKLIST X<LINKLIST>, newCONSTSUB X<newCONSTSUB>, newCONSTSUB_flags X<newCONSTSUB_flags>, newXS X<newXS>, op_append_elem X<op_append_elem>, op_append_list X<op_append_list>, OP_CLASS X<OP_CLASS>, op_contextualize X<op_contextualize>, op_convert_list X<op_convert_list>, OP_DESC X<OP_DESC>, op_free X<op_free>, OpHAS_SIBLING X<OpHAS_SIBLING>, OpLASTSIB_set X<OpLASTSIB_set>, op_linklist X<op_linklist>, op_lvalue X<op_lvalue>, OpMAYBESIB_set X<OpMAYBESIB_set>, OpMORESIB_set X<OpMORESIB_set>, OP_NAME X<OP_NAME>, op_null X<op_null>, op_parent X<op_parent>, op_prepend_elem X<op_prepend_elem>, op_scope X<op_scope>, OpSIBLING X<OpSIBLING>, op_sibling_splice X<op_sibling_splice>, OP_TYPE_IS X<OP_TYPE_IS>, OP_TYPE_IS_OR_WAS X<OP_TYPE_IS_OR_WAS>, rv2cv_op_cv X<rv2cv_op_cv> =item Pack and Unpack packlist X<packlist>, unpackstring X<unpackstring> =item Pad Data Structures CvPADLIST X<CvPADLIST>, pad_add_name_pvs X<pad_add_name_pvs>, PadARRAY X<PadARRAY>, pad_findmy_pvs X<pad_findmy_pvs>, PadlistARRAY X<PadlistARRAY>, PadlistMAX X<PadlistMAX>, PadlistNAMES X<PadlistNAMES>, PadlistNAMESARRAY X<PadlistNAMESARRAY>, PadlistNAMESMAX X<PadlistNAMESMAX>, PadlistREFCNT X<PadlistREFCNT>, PadMAX X<PadMAX>, PadnameLEN X<PadnameLEN>, PadnamelistARRAY X<PadnamelistARRAY>, PadnamelistMAX X<PadnamelistMAX>, PadnamelistREFCNT X<PadnamelistREFCNT>, PadnamelistREFCNT_dec X<PadnamelistREFCNT_dec>, PadnamePV X<PadnamePV>, PadnameREFCNT X<PadnameREFCNT>, PadnameREFCNT_dec X<PadnameREFCNT_dec>, PadnameSV X<PadnameSV>, PadnameUTF8 X<PadnameUTF8>, pad_new X<pad_new>, PL_comppad X<PL_comppad>, PL_comppad_name X<PL_comppad_name>, PL_curpad X<PL_curpad> =item Per-Interpreter Variables PL_curcop X<PL_curcop>, PL_curstash X<PL_curstash>, PL_defgv X<PL_defgv>, PL_exit_flags X<PL_exit_flags>, C<PERL_EXIT_DESTRUCT_END>, C<PERL_EXIT_ABORT>, C<PERL_EXIT_WARN>, C<PERL_EXIT_EXPECTED>, PL_modglobal X<PL_modglobal>, PL_na X<PL_na>, PL_opfreehook X<PL_opfreehook>, PL_peepp X<PL_peepp>, PL_perl_destruct_level X<PL_perl_destruct_level>, 0 - none, 1 - full, 2 or greater - full with checks, PL_rpeepp X<PL_rpeepp>, PL_runops X<PL_runops>, PL_sv_no X<PL_sv_no>, PL_sv_undef X<PL_sv_undef>, PL_sv_yes X<PL_sv_yes>, PL_sv_zero X<PL_sv_zero> =item REGEXP Functions SvRX X<SvRX>, SvRXOK X<SvRXOK> =item Stack Manipulation Macros dMARK X<dMARK>, dORIGMARK X<dORIGMARK>, dSP X<dSP>, EXTEND X<EXTEND>, MARK X<MARK>, mPUSHi X<mPUSHi>, mPUSHn X<mPUSHn>, mPUSHp X<mPUSHp>, mPUSHs X<mPUSHs>, mPUSHu X<mPUSHu>, mXPUSHi X<mXPUSHi>, mXPUSHn X<mXPUSHn>, mXPUSHp X<mXPUSHp>, mXPUSHs X<mXPUSHs>, mXPUSHu X<mXPUSHu>, ORIGMARK X<ORIGMARK>, POPi X<POPi>, POPl X<POPl>, POPn X<POPn>, POPp X<POPp>, POPpbytex X<POPpbytex>, POPpx X<POPpx>, POPs X<POPs>, POPu X<POPu>, POPul X<POPul>, PUSHi X<PUSHi>, PUSHMARK X<PUSHMARK>, PUSHmortal X<PUSHmortal>, PUSHn X<PUSHn>, PUSHp X<PUSHp>, PUSHs X<PUSHs>, PUSHu X<PUSHu>, PUTBACK X<PUTBACK>, SP X<SP>, SPAGAIN X<SPAGAIN>, XPUSHi X<XPUSHi>, XPUSHmortal X<XPUSHmortal>, XPUSHn X<XPUSHn>, XPUSHp X<XPUSHp>, XPUSHs X<XPUSHs>, XPUSHu X<XPUSHu>, XSRETURN X<XSRETURN>, XSRETURN_EMPTY X<XSRETURN_EMPTY>, XSRETURN_IV X<XSRETURN_IV>, XSRETURN_NO X<XSRETURN_NO>, XSRETURN_NV X<XSRETURN_NV>, XSRETURN_PV X<XSRETURN_PV>, XSRETURN_UNDEF X<XSRETURN_UNDEF>, XSRETURN_UV X<XSRETURN_UV>, XSRETURN_YES X<XSRETURN_YES>, XST_mIV X<XST_mIV>, XST_mNO X<XST_mNO>, XST_mNV X<XST_mNV>, XST_mPV X<XST_mPV>, XST_mUNDEF X<XST_mUNDEF>, XST_mUV X<XST_mUV>, XST_mYES X<XST_mYES> =item SV Flags SVt_IV X<SVt_IV>, SVt_NULL X<SVt_NULL>, SVt_NV X<SVt_NV>, SVt_PV X<SVt_PV>, SVt_PVAV X<SVt_PVAV>, SVt_PVCV X<SVt_PVCV>, SVt_PVFM X<SVt_PVFM>, SVt_PVGV X<SVt_PVGV>, SVt_PVHV X<SVt_PVHV>, SVt_PVIO X<SVt_PVIO>, SVt_PVIV X<SVt_PVIV>, SVt_PVLV X<SVt_PVLV>, SVt_PVMG X<SVt_PVMG>, SVt_PVNV X<SVt_PVNV>, SVt_REGEXP X<SVt_REGEXP>, svtype X<svtype> =item SV Manipulation Functions boolSV X<boolSV>, croak_xs_usage X<croak_xs_usage>, get_sv X<get_sv>, looks_like_number X<looks_like_number>, newRV_inc X<newRV_inc>, newRV_noinc X<newRV_noinc>, newSV X<newSV>, newSVhek X<newSVhek>, newSViv X<newSViv>, newSVnv X<newSVnv>, newSVpadname X<newSVpadname>, newSVpv X<newSVpv>, newSVpvf X<newSVpvf>, newSVpvn X<newSVpvn>, newSVpvn_flags X<newSVpvn_flags>, newSVpvn_share X<newSVpvn_share>, newSVpvn_utf8 X<newSVpvn_utf8>, newSVpvs X<newSVpvs>, newSVpvs_flags X<newSVpvs_flags>, newSVpv_share X<newSVpv_share>, newSVpvs_share X<newSVpvs_share>, newSVrv X<newSVrv>, newSVsv X<newSVsv>, newSVsv_nomg X<newSVsv_nomg>, newSV_type X<newSV_type>, newSVuv X<newSVuv>, sortsv_flags X<sortsv_flags>, sv_2bool X<sv_2bool>, sv_2bool_flags X<sv_2bool_flags>, sv_2cv X<sv_2cv>, sv_2io X<sv_2io>, sv_2iv_flags X<sv_2iv_flags>, sv_2mortal X<sv_2mortal>, sv_2nv_flags X<sv_2nv_flags>, sv_2pvbyte X<sv_2pvbyte>, sv_2pvutf8 X<sv_2pvutf8>, sv_2pv_flags X<sv_2pv_flags>, sv_2uv_flags X<sv_2uv_flags>, sv_backoff X<sv_backoff>, sv_bless X<sv_bless>, sv_catpv X<sv_catpv>, sv_catpvf X<sv_catpvf>, sv_catpvf_mg X<sv_catpvf_mg>, sv_catpvn X<sv_catpvn>, sv_catpvn_flags X<sv_catpvn_flags>, sv_catpvn_nomg X<sv_catpvn_nomg>, sv_catpvs X<sv_catpvs>, sv_catpvs_flags X<sv_catpvs_flags>, sv_catpvs_mg X<sv_catpvs_mg>, sv_catpvs_nomg X<sv_catpvs_nomg>, sv_catpv_flags X<sv_catpv_flags>, sv_catpv_mg X<sv_catpv_mg>, sv_catpv_nomg X<sv_catpv_nomg>, sv_catsv X<sv_catsv>, sv_catsv_flags X<sv_catsv_flags>, sv_catsv_nomg X<sv_catsv_nomg>, sv_chop X<sv_chop>, sv_clear X<sv_clear>, sv_cmp X<sv_cmp>, sv_cmp_flags X<sv_cmp_flags>, sv_cmp_locale X<sv_cmp_locale>, sv_cmp_locale_flags X<sv_cmp_locale_flags>, sv_collxfrm X<sv_collxfrm>, sv_collxfrm_flags X<sv_collxfrm_flags>, sv_copypv X<sv_copypv>, sv_copypv_flags X<sv_copypv_flags>, sv_copypv_nomg X<sv_copypv_nomg>, SvCUR X<SvCUR>, SvCUR_set X<SvCUR_set>, sv_dec X<sv_dec>, sv_dec_nomg X<sv_dec_nomg>, sv_derived_from X<sv_derived_from>, sv_derived_from_pv X<sv_derived_from_pv>, sv_derived_from_pvn X<sv_derived_from_pvn>, sv_derived_from_sv X<sv_derived_from_sv>, sv_does X<sv_does>, sv_does_pv X<sv_does_pv>, sv_does_pvn X<sv_does_pvn>, sv_does_sv X<sv_does_sv>, SvEND X<SvEND>, sv_eq X<sv_eq>, sv_eq_flags X<sv_eq_flags>, sv_force_normal_flags X<sv_force_normal_flags>, sv_free X<sv_free>, SvGAMAGIC X<SvGAMAGIC>, sv_gets X<sv_gets>, sv_get_backrefs X<sv_get_backrefs>, SvGROW X<SvGROW>, sv_grow X<sv_grow>, sv_inc X<sv_inc>, sv_inc_nomg X<sv_inc_nomg>, sv_insert X<sv_insert>, sv_insert_flags X<sv_insert_flags>, SvIOK X<SvIOK>, SvIOK_notUV X<SvIOK_notUV>, SvIOK_off X<SvIOK_off>, SvIOK_on X<SvIOK_on>, SvIOK_only X<SvIOK_only>, SvIOK_only_UV X<SvIOK_only_UV>, SvIOKp X<SvIOKp>, SvIOK_UV X<SvIOK_UV>, sv_isa X<sv_isa>, sv_isa_sv X<sv_isa_sv>, SvIsCOW X<SvIsCOW>, SvIsCOW_shared_hash X<SvIsCOW_shared_hash>, sv_isobject X<sv_isobject>, SvIV X<SvIV>, SvIV_nomg X<SvIV_nomg>, SvIV_set X<SvIV_set>, SvIVX X<SvIVX>, SvIVx X<SvIVx>, SvLEN X<SvLEN>, sv_len X<sv_len>, SvLEN_set X<SvLEN_set>, sv_len_utf8 X<sv_len_utf8>, sv_magic X<sv_magic>, sv_magicext X<sv_magicext>, SvMAGIC_set X<SvMAGIC_set>, sv_mortalcopy X<sv_mortalcopy>, sv_mortalcopy_flags X<sv_mortalcopy_flags>, sv_newmortal X<sv_newmortal>, sv_newref X<sv_newref>, SvNIOK X<SvNIOK>, SvNIOK_off X<SvNIOK_off>, SvNIOKp X<SvNIOKp>, SvNOK X<SvNOK>, SvNOK_off X<SvNOK_off>, SvNOK_on X<SvNOK_on>, SvNOK_only X<SvNOK_only>, SvNOKp X<SvNOKp>, SvNV X<SvNV>, SvNV_nomg X<SvNV_nomg>, SvNV_set X<SvNV_set>, SvNVX X<SvNVX>, SvNVx X<SvNVx>, SvOK X<SvOK>, SvOOK X<SvOOK>, SvOOK_offset X<SvOOK_offset>, SvPOK X<SvPOK>, SvPOK_off X<SvPOK_off>, SvPOK_on X<SvPOK_on>, SvPOK_only X<SvPOK_only>, SvPOK_only_UTF8 X<SvPOK_only_UTF8>, SvPOKp X<SvPOKp>, sv_pos_b2u X<sv_pos_b2u>, sv_pos_b2u_flags X<sv_pos_b2u_flags>, sv_pos_u2b X<sv_pos_u2b>, sv_pos_u2b_flags X<sv_pos_u2b_flags>, SvPV X<SvPV>, SvPVbyte X<SvPVbyte>, SvPVbyte_force X<SvPVbyte_force>, SvPVbyte_nolen X<SvPVbyte_nolen>, SvPVbyte_nomg X<SvPVbyte_nomg>, sv_pvbyten_force X<sv_pvbyten_force>, SvPVbyte_or_null X<SvPVbyte_or_null>, SvPVbyte_or_null_nomg X<SvPVbyte_or_null_nomg>, SvPVbytex X<SvPVbytex>, SvPVbytex_force X<SvPVbytex_force>, SvPVCLEAR X<SvPVCLEAR>, SvPV_force X<SvPV_force>, SvPV_force_nomg X<SvPV_force_nomg>, SvPV_nolen X<SvPV_nolen>, SvPV_nomg X<SvPV_nomg>, SvPV_nomg_nolen X<SvPV_nomg_nolen>, sv_pvn_force X<sv_pvn_force>, sv_pvn_force_flags X<sv_pvn_force_flags>, SvPV_set X<SvPV_set>, SvPVutf8 X<SvPVutf8>, sv_pvutf8n_force X<sv_pvutf8n_force>, SvPVutf8x X<SvPVutf8x>, SvPVutf8x_force X<SvPVutf8x_force>, SvPVutf8_force X<SvPVutf8_force>, SvPVutf8_nolen X<SvPVutf8_nolen>, SvPVutf8_nomg X<SvPVutf8_nomg>, SvPVutf8_or_null X<SvPVutf8_or_null>, SvPVutf8_or_null_nomg X<SvPVutf8_or_null_nomg>, SvPVX X<SvPVX>, SvPVx X<SvPVx>, SvREADONLY X<SvREADONLY>, SvREADONLY_off X<SvREADONLY_off>, SvREADONLY_on X<SvREADONLY_on>, sv_ref X<sv_ref>, SvREFCNT X<SvREFCNT>, SvREFCNT_dec X<SvREFCNT_dec>, SvREFCNT_dec_NN X<SvREFCNT_dec_NN>, SvREFCNT_inc X<SvREFCNT_inc>, SvREFCNT_inc_NN X<SvREFCNT_inc_NN>, SvREFCNT_inc_simple X<SvREFCNT_inc_simple>, SvREFCNT_inc_simple_NN X<SvREFCNT_inc_simple_NN>, SvREFCNT_inc_simple_void X<SvREFCNT_inc_simple_void>, SvREFCNT_inc_simple_void_NN X<SvREFCNT_inc_simple_void_NN>, SvREFCNT_inc_void X<SvREFCNT_inc_void>, SvREFCNT_inc_void_NN X<SvREFCNT_inc_void_NN>, sv_reftype X<sv_reftype>, sv_replace X<sv_replace>, sv_report_used X<sv_report_used>, sv_reset X<sv_reset>, SvROK X<SvROK>, SvROK_off X<SvROK_off>, SvROK_on X<SvROK_on>, SvRV X<SvRV>, SvRV_set X<SvRV_set>, sv_rvunweaken X<sv_rvunweaken>, sv_rvweaken X<sv_rvweaken>, sv_setiv X<sv_setiv>, sv_setiv_mg X<sv_setiv_mg>, sv_setnv X<sv_setnv>, sv_setnv_mg X<sv_setnv_mg>, sv_setpv X<sv_setpv>, sv_setpvf X<sv_setpvf>, sv_setpvf_mg X<sv_setpvf_mg>, sv_setpviv X<sv_setpviv>, sv_setpviv_mg X<sv_setpviv_mg>, sv_setpvn X<sv_setpvn>, sv_setpvn_mg X<sv_setpvn_mg>, sv_setpvs X<sv_setpvs>, sv_setpvs_mg X<sv_setpvs_mg>, sv_setpv_bufsize X<sv_setpv_bufsize>, sv_setpv_mg X<sv_setpv_mg>, sv_setref_iv X<sv_setref_iv>, sv_setref_nv X<sv_setref_nv>, sv_setref_pv X<sv_setref_pv>, sv_setref_pvn X<sv_setref_pvn>, sv_setref_pvs X<sv_setref_pvs>, sv_setref_uv X<sv_setref_uv>, sv_setsv X<sv_setsv>, sv_setsv_flags X<sv_setsv_flags>, sv_setsv_mg X<sv_setsv_mg>, sv_setsv_nomg X<sv_setsv_nomg>, sv_setuv X<sv_setuv>, sv_setuv_mg X<sv_setuv_mg>, sv_set_undef X<sv_set_undef>, SvSTASH X<SvSTASH>, SvSTASH_set X<SvSTASH_set>, SvTAINT X<SvTAINT>, SvTAINTED X<SvTAINTED>, sv_tainted X<sv_tainted>, SvTAINTED_off X<SvTAINTED_off>, SvTAINTED_on X<SvTAINTED_on>, SvTRUE X<SvTRUE>, sv_true X<sv_true>, SvTRUE_nomg X<SvTRUE_nomg>, SvTRUEx X<SvTRUEx>, SvTYPE X<SvTYPE>, sv_unmagic X<sv_unmagic>, sv_unmagicext X<sv_unmagicext>, sv_unref_flags X<sv_unref_flags>, sv_untaint X<sv_untaint>, SvUOK X<SvUOK>, SvUPGRADE X<SvUPGRADE>, sv_upgrade X<sv_upgrade>, sv_usepvn_flags X<sv_usepvn_flags>, SvUTF8 X<SvUTF8>, sv_utf8_decode X<sv_utf8_decode>, sv_utf8_downgrade X<sv_utf8_downgrade>, sv_utf8_downgrade_flags X<sv_utf8_downgrade_flags>, sv_utf8_downgrade_nomg X<sv_utf8_downgrade_nomg>, sv_utf8_encode X<sv_utf8_encode>, sv_utf8_upgrade X<sv_utf8_upgrade>, sv_utf8_upgrade_flags X<sv_utf8_upgrade_flags>, sv_utf8_upgrade_flags_grow X<sv_utf8_upgrade_flags_grow>, sv_utf8_upgrade_nomg X<sv_utf8_upgrade_nomg>, SvUTF8_off X<SvUTF8_off>, SvUTF8_on X<SvUTF8_on>, SvUV X<SvUV>, SvUV_nomg X<SvUV_nomg>, SvUV_set X<SvUV_set>, SvUVX X<SvUVX>, SvUVx X<SvUVx>, SvUVXx X<SvUVXx>, sv_vcatpvf X<sv_vcatpvf>, sv_vcatpvfn X<sv_vcatpvfn>, sv_vcatpvfn_flags X<sv_vcatpvfn_flags>, sv_vcatpvf_mg X<sv_vcatpvf_mg>, SvVOK X<SvVOK>, sv_vsetpvf X<sv_vsetpvf>, sv_vsetpvfn X<sv_vsetpvfn>, sv_vsetpvf_mg X<sv_vsetpvf_mg> =item Unicode Support BOM_UTF8 X<BOM_UTF8>, bytes_cmp_utf8 X<bytes_cmp_utf8>, bytes_from_utf8 X<bytes_from_utf8>, bytes_to_utf8 X<bytes_to_utf8>, DO_UTF8 X<DO_UTF8>, foldEQ_utf8 X<foldEQ_utf8>, is_ascii_string X<is_ascii_string>, is_c9strict_utf8_string X<is_c9strict_utf8_string>, is_c9strict_utf8_string_loc X<is_c9strict_utf8_string_loc>, is_c9strict_utf8_string_loclen X<is_c9strict_utf8_string_loclen>, isC9_STRICT_UTF8_CHAR X<isC9_STRICT_UTF8_CHAR>, is_invariant_string X<is_invariant_string>, isSTRICT_UTF8_CHAR X<isSTRICT_UTF8_CHAR>, is_strict_utf8_string X<is_strict_utf8_string>, is_strict_utf8_string_loc X<is_strict_utf8_string_loc>, is_strict_utf8_string_loclen X<is_strict_utf8_string_loclen>, is_utf8_fixed_width_buf_flags X<is_utf8_fixed_width_buf_flags>, is_utf8_fixed_width_buf_loclen_flags X<is_utf8_fixed_width_buf_loclen_flags>, is_utf8_fixed_width_buf_loc_flags X<is_utf8_fixed_width_buf_loc_flags>, is_utf8_invariant_string X<is_utf8_invariant_string>, is_utf8_invariant_string_loc X<is_utf8_invariant_string_loc>, is_utf8_string X<is_utf8_string>, is_utf8_string_flags X<is_utf8_string_flags>, is_utf8_string_loc X<is_utf8_string_loc>, is_utf8_string_loclen X<is_utf8_string_loclen>, is_utf8_string_loclen_flags X<is_utf8_string_loclen_flags>, is_utf8_string_loc_flags X<is_utf8_string_loc_flags>, is_utf8_valid_partial_char X<is_utf8_valid_partial_char>, is_utf8_valid_partial_char_flags X<is_utf8_valid_partial_char_flags>, isUTF8_CHAR X<isUTF8_CHAR>, isUTF8_CHAR_flags X<isUTF8_CHAR_flags>, LATIN1_TO_NATIVE X<LATIN1_TO_NATIVE>, NATIVE_TO_LATIN1 X<NATIVE_TO_LATIN1>, NATIVE_TO_UNI X<NATIVE_TO_UNI>, pv_uni_display X<pv_uni_display>, REPLACEMENT_CHARACTER_UTF8 X<REPLACEMENT_CHARACTER_UTF8>, sv_cat_decode X<sv_cat_decode>, sv_recode_to_utf8 X<sv_recode_to_utf8>, sv_uni_display X<sv_uni_display>, UNICODE_REPLACEMENT X<UNICODE_REPLACEMENT>, UNI_TO_NATIVE X<UNI_TO_NATIVE>, utf8n_to_uvchr X<utf8n_to_uvchr>, utf8n_to_uvchr_error X<utf8n_to_uvchr_error>, C<UTF8_GOT_PERL_EXTENDED>, C<UTF8_GOT_CONTINUATION>, C<UTF8_GOT_EMPTY>, C<UTF8_GOT_LONG>, C<UTF8_GOT_NONCHAR>, C<UTF8_GOT_NON_CONTINUATION>, C<UTF8_GOT_OVERFLOW>, C<UTF8_GOT_SHORT>, C<UTF8_GOT_SUPER>, C<UTF8_GOT_SURROGATE>, utf8n_to_uvchr_msgs X<utf8n_to_uvchr_msgs>, C<text>, C<warn_categories>, C<flag>, UTF8SKIP X<UTF8SKIP>, L</C<UTF8_SAFE_SKIP>> if you know the maximum ending pointer in the buffer pointed to by C<s>; or, L</C<UTF8_CHK_SKIP>> if you don't know it, UTF8_CHK_SKIP X<UTF8_CHK_SKIP>, utf8_distance X<utf8_distance>, utf8_hop X<utf8_hop>, utf8_hop_back X<utf8_hop_back>, utf8_hop_forward X<utf8_hop_forward>, utf8_hop_safe X<utf8_hop_safe>, UTF8_IS_INVARIANT X<UTF8_IS_INVARIANT>, UTF8_IS_NONCHAR X<UTF8_IS_NONCHAR>, UTF8_IS_SUPER X<UTF8_IS_SUPER>, UTF8_IS_SURROGATE X<UTF8_IS_SURROGATE>, utf8_length X<utf8_length>, UTF8_MAXBYTES X<UTF8_MAXBYTES>, UTF8_MAXBYTES_CASE X<UTF8_MAXBYTES_CASE>, UTF8_SAFE_SKIP X<UTF8_SAFE_SKIP>, UTF8_SKIP X<UTF8_SKIP>, utf8_to_bytes X<utf8_to_bytes>, utf8_to_uvchr_buf X<utf8_to_uvchr_buf>, UVCHR_IS_INVARIANT X<UVCHR_IS_INVARIANT>, UVCHR_SKIP X<UVCHR_SKIP>, uvchr_to_utf8 X<uvchr_to_utf8>, uvchr_to_utf8_flags X<uvchr_to_utf8_flags>, uvchr_to_utf8_flags_msgs X<uvchr_to_utf8_flags_msgs>, C<text>, C<warn_categories>, C<flag> =item Variables created by C<xsubpp> and C<xsubpp> internal functions newXSproto X<newXSproto>, XS_APIVERSION_BOOTCHECK X<XS_APIVERSION_BOOTCHECK>, XS_VERSION X<XS_VERSION>, XS_VERSION_BOOTCHECK X<XS_VERSION_BOOTCHECK> =item Warning and Dieing ckWARN X<ckWARN>, ckWARN2 X<ckWARN2>, ckWARN3 X<ckWARN3>, ckWARN4 X<ckWARN4>, ckWARN_d X<ckWARN_d>, ckWARN2_d X<ckWARN2_d>, ckWARN3_d X<ckWARN3_d>, ckWARN4_d X<ckWARN4_d>, CLEAR_ERRSV X<CLEAR_ERRSV>, croak X<croak>, croak_no_modify X<croak_no_modify>, croak_sv X<croak_sv>, die X<die>, die_sv X<die_sv>, ERRSV X<ERRSV>, my_setenv X<my_setenv>, rsignal X<rsignal>, SANE_ERRSV X<SANE_ERRSV>, vcroak X<vcroak>, vwarn X<vwarn>, warn X<warn>, warn_sv X<warn_sv> =item Undocumented functions CvDEPTH X<CvDEPTH>, CvGV X<CvGV>, GetVars X<GetVars>, Gv_AMupdate X<Gv_AMupdate>, PerlIO_close X<PerlIO_close>, PerlIO_context_layers X<PerlIO_context_layers>, PerlIO_error X<PerlIO_error>, PerlIO_fill X<PerlIO_fill>, PerlIO_flush X<PerlIO_flush>, PerlIO_get_bufsiz X<PerlIO_get_bufsiz>, PerlIO_get_ptr X<PerlIO_get_ptr>, PerlIO_read X<PerlIO_read>, PerlIO_seek X<PerlIO_seek>, PerlIO_set_cnt X<PerlIO_set_cnt>, PerlIO_setlinebuf X<PerlIO_setlinebuf>, PerlIO_stdout X<PerlIO_stdout>, PerlIO_unread X<PerlIO_unread>, SvAMAGIC_off X<SvAMAGIC_off>, SvAMAGIC_on X<SvAMAGIC_on>, amagic_call X<amagic_call>, amagic_deref_call X<amagic_deref_call>, any_dup X<any_dup>, atfork_lock X<atfork_lock>, atfork_unlock X<atfork_unlock>, av_arylen_p X<av_arylen_p>, av_iter_p X<av_iter_p>, block_gimme X<block_gimme>, call_atexit X<call_atexit>, call_list X<call_list>, calloc X<calloc>, cast_i32 X<cast_i32>, cast_iv X<cast_iv>, cast_ulong X<cast_ulong>, cast_uv X<cast_uv>, ck_warner X<ck_warner>, ck_warner_d X<ck_warner_d>, ckwarn X<ckwarn>, ckwarn_d X<ckwarn_d>, clear_defarray X<clear_defarray>, clone_params_del X<clone_params_del>, clone_params_new X<clone_params_new>, croak_nocontext X<croak_nocontext>, csighandler X<csighandler>, csighandler1 X<csighandler1>, csighandler3 X<csighandler3>, cx_dump X<cx_dump>, cx_dup X<cx_dup>, cxinc X<cxinc>, deb X<deb>, deb_nocontext X<deb_nocontext>, debop X<debop>, debprofdump X<debprofdump>, debstack X<debstack>, debstackptrs X<debstackptrs>, delimcpy X<delimcpy>, despatch_signals X<despatch_signals>, die_nocontext X<die_nocontext>, dirp_dup X<dirp_dup>, do_aspawn X<do_aspawn>, do_close X<do_close>, do_gv_dump X<do_gv_dump>, do_gvgv_dump X<do_gvgv_dump>, do_hv_dump X<do_hv_dump>, do_join X<do_join>, do_magic_dump X<do_magic_dump>, do_op_dump X<do_op_dump>, do_open X<do_open>, do_openn X<do_openn>, do_pmop_dump X<do_pmop_dump>, do_spawn X<do_spawn>, do_spawn_nowait X<do_spawn_nowait>, do_sprintf X<do_sprintf>, do_sv_dump X<do_sv_dump>, doing_taint X<doing_taint>, doref X<doref>, dounwind X<dounwind>, dowantarray X<dowantarray>, dump_eval X<dump_eval>, dump_form X<dump_form>, dump_indent X<dump_indent>, dump_mstats X<dump_mstats>, dump_sub X<dump_sub>, dump_vindent X<dump_vindent>, filter_del X<filter_del>, filter_read X<filter_read>, foldEQ_latin1 X<foldEQ_latin1>, form_nocontext X<form_nocontext>, fp_dup X<fp_dup>, free_global_struct X<free_global_struct>, free_tmps X<free_tmps>, get_context X<get_context>, get_mstats X<get_mstats>, get_op_descs X<get_op_descs>, get_op_names X<get_op_names>, get_ppaddr X<get_ppaddr>, get_vtbl X<get_vtbl>, gp_dup X<gp_dup>, gp_free X<gp_free>, gp_ref X<gp_ref>, gv_AVadd X<gv_AVadd>, gv_HVadd X<gv_HVadd>, gv_IOadd X<gv_IOadd>, gv_SVadd X<gv_SVadd>, gv_add_by_type X<gv_add_by_type>, gv_autoload4 X<gv_autoload4>, gv_autoload_pv X<gv_autoload_pv>, gv_autoload_pvn X<gv_autoload_pvn>, gv_autoload_sv X<gv_autoload_sv>, gv_check X<gv_check>, gv_dump X<gv_dump>, gv_efullname3 X<gv_efullname3>, gv_efullname4 X<gv_efullname4>, gv_fetchfile X<gv_fetchfile>, gv_fetchfile_flags X<gv_fetchfile_flags>, gv_fetchpv X<gv_fetchpv>, gv_fetchpvn_flags X<gv_fetchpvn_flags>, gv_fetchsv X<gv_fetchsv>, gv_fullname3 X<gv_fullname3>, gv_fullname4 X<gv_fullname4>, gv_handler X<gv_handler>, gv_name_set X<gv_name_set>, he_dup X<he_dup>, hek_dup X<hek_dup>, hv_common X<hv_common>, hv_common_key_len X<hv_common_key_len>, hv_delayfree_ent X<hv_delayfree_ent>, hv_eiter_p X<hv_eiter_p>, hv_eiter_set X<hv_eiter_set>, hv_free_ent X<hv_free_ent>, hv_ksplit X<hv_ksplit>, hv_name_set X<hv_name_set>, hv_placeholders_get X<hv_placeholders_get>, hv_placeholders_set X<hv_placeholders_set>, hv_rand_set X<hv_rand_set>, hv_riter_p X<hv_riter_p>, hv_riter_set X<hv_riter_set>, ibcmp_utf8 X<ibcmp_utf8>, init_global_struct X<init_global_struct>, init_stacks X<init_stacks>, init_tm X<init_tm>, is_lvalue_sub X<is_lvalue_sub>, leave_scope X<leave_scope>, load_module_nocontext X<load_module_nocontext>, magic_dump X<magic_dump>, markstack_grow X<markstack_grow>, mess_nocontext X<mess_nocontext>, mfree X<mfree>, mg_dup X<mg_dup>, mg_size X<mg_size>, mini_mktime X<mini_mktime>, moreswitches X<moreswitches>, mro_get_from_name X<mro_get_from_name>, mro_set_mro X<mro_set_mro>, mro_set_private_data X<mro_set_private_data>, my_atof X<my_atof>, my_chsize X<my_chsize>, my_cxt_index X<my_cxt_index>, my_cxt_init X<my_cxt_init>, my_dirfd X<my_dirfd>, my_failure_exit X<my_failure_exit>, my_fflush_all X<my_fflush_all>, my_fork X<my_fork>, my_lstat X<my_lstat>, my_pclose X<my_pclose>, my_popen X<my_popen>, my_popen_list X<my_popen_list>, my_socketpair X<my_socketpair>, my_stat X<my_stat>, my_strftime X<my_strftime>, newANONATTRSUB X<newANONATTRSUB>, newANONHASH X<newANONHASH>, newANONLIST X<newANONLIST>, newANONSUB X<newANONSUB>, newATTRSUB X<newATTRSUB>, newAVREF X<newAVREF>, newCVREF X<newCVREF>, newFORM X<newFORM>, newGVREF X<newGVREF>, newGVgen X<newGVgen>, newGVgen_flags X<newGVgen_flags>, newHVREF X<newHVREF>, newHVhv X<newHVhv>, newIO X<newIO>, newMYSUB X<newMYSUB>, newPROG X<newPROG>, newRV X<newRV>, newSUB X<newSUB>, newSVREF X<newSVREF>, newSVpvf_nocontext X<newSVpvf_nocontext>, newSVsv_flags X<newSVsv_flags>, new_stackinfo X<new_stackinfo>, op_refcnt_lock X<op_refcnt_lock>, op_refcnt_unlock X<op_refcnt_unlock>, parser_dup X<parser_dup>, perl_alloc_using X<perl_alloc_using>, perl_clone_using X<perl_clone_using>, perly_sighandler X<perly_sighandler>, pmop_dump X<pmop_dump>, pop_scope X<pop_scope>, pregcomp X<pregcomp>, pregexec X<pregexec>, pregfree X<pregfree>, pregfree2 X<pregfree2>, ptr_table_fetch X<ptr_table_fetch>, ptr_table_free X<ptr_table_free>, ptr_table_new X<ptr_table_new>, ptr_table_split X<ptr_table_split>, ptr_table_store X<ptr_table_store>, push_scope X<push_scope>, re_compile X<re_compile>, re_dup_guts X<re_dup_guts>, reentrant_free X<reentrant_free>, reentrant_init X<reentrant_init>, reentrant_retry X<reentrant_retry>, reentrant_size X<reentrant_size>, ref X<ref>, reg_named_buff_all X<reg_named_buff_all>, reg_named_buff_exists X<reg_named_buff_exists>, reg_named_buff_fetch X<reg_named_buff_fetch>, reg_named_buff_firstkey X<reg_named_buff_firstkey>, reg_named_buff_nextkey X<reg_named_buff_nextkey>, reg_named_buff_scalar X<reg_named_buff_scalar>, regdump X<regdump>, regdupe_internal X<regdupe_internal>, regexec_flags X<regexec_flags>, regfree_internal X<regfree_internal>, reginitcolors X<reginitcolors>, regnext X<regnext>, repeatcpy X<repeatcpy>, rsignal_state X<rsignal_state>, runops_debug X<runops_debug>, runops_standard X<runops_standard>, rvpv_dup X<rvpv_dup>, safesyscalloc X<safesyscalloc>, safesysfree X<safesysfree>, safesysmalloc X<safesysmalloc>, safesysrealloc X<safesysrealloc>, save_I16 X<save_I16>, save_I32 X<save_I32>, save_I8 X<save_I8>, save_adelete X<save_adelete>, save_aelem X<save_aelem>, save_aelem_flags X<save_aelem_flags>, save_alloc X<save_alloc>, save_ary X<save_ary>, save_bool X<save_bool>, save_clearsv X<save_clearsv>, save_delete X<save_delete>, save_destructor X<save_destructor>, save_destructor_x X<save_destructor_x>, save_freeop X<save_freeop>, save_freepv X<save_freepv>, save_freesv X<save_freesv>, save_generic_pvref X<save_generic_pvref>, save_generic_svref X<save_generic_svref>, save_hdelete X<save_hdelete>, save_helem X<save_helem>, save_helem_flags X<save_helem_flags>, save_hints X<save_hints>, save_hptr X<save_hptr>, save_int X<save_int>, save_item X<save_item>, save_iv X<save_iv>, save_mortalizesv X<save_mortalizesv>, save_op X<save_op>, save_padsv_and_mortalize X<save_padsv_and_mortalize>, save_pptr X<save_pptr>, save_pushi32ptr X<save_pushi32ptr>, save_pushptr X<save_pushptr>, save_pushptrptr X<save_pushptrptr>, save_re_context X<save_re_context>, save_set_svflags X<save_set_svflags>, save_shared_pvref X<save_shared_pvref>, save_sptr X<save_sptr>, save_svref X<save_svref>, save_vptr X<save_vptr>, savestack_grow X<savestack_grow>, savestack_grow_cnt X<savestack_grow_cnt>, scan_num X<scan_num>, scan_vstring X<scan_vstring>, seed X<seed>, set_context X<set_context>, share_hek X<share_hek>, si_dup X<si_dup>, ss_dup X<ss_dup>, stack_grow X<stack_grow>, start_subparse X<start_subparse>, str_to_version X<str_to_version>, sv_2iv X<sv_2iv>, sv_2pv X<sv_2pv>, sv_2pvbyte_flags X<sv_2pvbyte_flags>, sv_2pvutf8_flags X<sv_2pvutf8_flags>, sv_2uv X<sv_2uv>, sv_catpvf_mg_nocontext X<sv_catpvf_mg_nocontext>, sv_catpvf_nocontext X<sv_catpvf_nocontext>, sv_dup X<sv_dup>, sv_dup_inc X<sv_dup_inc>, sv_peek X<sv_peek>, sv_setpvf_mg_nocontext X<sv_setpvf_mg_nocontext>, sv_setpvf_nocontext X<sv_setpvf_nocontext>, sys_init X<sys_init>, sys_init3 X<sys_init3>, sys_intern_clear X<sys_intern_clear>, sys_intern_dup X<sys_intern_dup>, sys_intern_init X<sys_intern_init>, sys_term X<sys_term>, taint_env X<taint_env>, taint_proper X<taint_proper>, unlnk X<unlnk>, unsharepvn X<unsharepvn>, vdeb X<vdeb>, vform X<vform>, vload_module X<vload_module>, vnewSVpvf X<vnewSVpvf>, vwarner X<vwarner>, warn_nocontext X<warn_nocontext>, warner X<warner>, warner_nocontext X<warner_nocontext>, whichsig X<whichsig>, whichsig_pv X<whichsig_pv>, whichsig_pvn X<whichsig_pvn>, whichsig_sv X<whichsig_sv> =item AUTHORS =item SEE ALSO =back =head2 perlintern - autogenerated documentation of purely B<internal> Perl functions =over 4 =item DESCRIPTION X<internal Perl functions> X<interpreter functions> =item Array Manipulation Functions AvFILLp X<AvFILLp> =item Compile-time scope hooks BhkENTRY X<BhkENTRY>, BhkFLAGS X<BhkFLAGS>, CALL_BLOCK_HOOKS X<CALL_BLOCK_HOOKS> =item Custom Operators core_prototype X<core_prototype> =item CV Manipulation Functions docatch X<docatch> =item CV reference counts and CvOUTSIDE CvWEAKOUTSIDE X<CvWEAKOUTSIDE> =item Embedding Functions cv_dump X<cv_dump>, cv_forget_slab X<cv_forget_slab>, do_dump_pad X<do_dump_pad>, pad_alloc_name X<pad_alloc_name>, pad_block_start X<pad_block_start>, pad_check_dup X<pad_check_dup>, pad_findlex X<pad_findlex>, pad_fixup_inner_anons X<pad_fixup_inner_anons>, pad_free X<pad_free>, pad_leavemy X<pad_leavemy>, padlist_dup X<padlist_dup>, padname_dup X<padname_dup>, padnamelist_dup X<padnamelist_dup>, pad_push X<pad_push>, pad_reset X<pad_reset>, pad_swipe X<pad_swipe> =item Errno dSAVEDERRNO X<dSAVEDERRNO>, dSAVE_ERRNO X<dSAVE_ERRNO>, RESTORE_ERRNO X<RESTORE_ERRNO>, SAVE_ERRNO X<SAVE_ERRNO>, SETERRNO X<SETERRNO> =item GV Functions gv_try_downgrade X<gv_try_downgrade> =item Hash Manipulation Functions hv_ename_add X<hv_ename_add>, hv_ename_delete X<hv_ename_delete>, refcounted_he_chain_2hv X<refcounted_he_chain_2hv>, refcounted_he_fetch_pv X<refcounted_he_fetch_pv>, refcounted_he_fetch_pvn X<refcounted_he_fetch_pvn>, refcounted_he_fetch_pvs X<refcounted_he_fetch_pvs>, refcounted_he_fetch_sv X<refcounted_he_fetch_sv>, refcounted_he_free X<refcounted_he_free>, refcounted_he_inc X<refcounted_he_inc>, refcounted_he_new_pv X<refcounted_he_new_pv>, refcounted_he_new_pvn X<refcounted_he_new_pvn>, refcounted_he_new_pvs X<refcounted_he_new_pvs>, refcounted_he_new_sv X<refcounted_he_new_sv> =item IO Functions start_glob X<start_glob> =item Lexer interface validate_proto X<validate_proto> =item Magical Functions magic_clearhint X<magic_clearhint>, magic_clearhints X<magic_clearhints>, magic_methcall X<magic_methcall>, magic_sethint X<magic_sethint>, mg_localize X<mg_localize> =item Miscellaneous Functions free_c_backtrace X<free_c_backtrace>, get_c_backtrace X<get_c_backtrace>, quadmath_format_needed X<quadmath_format_needed>, quadmath_format_valid X<quadmath_format_valid> =item MRO Functions mro_get_linear_isa_dfs X<mro_get_linear_isa_dfs>, mro_isa_changed_in X<mro_isa_changed_in>, mro_package_moved X<mro_package_moved> =item Numeric functions grok_atoUV X<grok_atoUV>, isinfnansv X<isinfnansv> =item Obsolete backwards compatibility functions utf8n_to_uvuni X<utf8n_to_uvuni>, utf8_to_uvuni X<utf8_to_uvuni>, uvuni_to_utf8_flags X<uvuni_to_utf8_flags> =item Optree Manipulation Functions finalize_optree X<finalize_optree>, newATTRSUB_x X<newATTRSUB_x>, newXS_len_flags X<newXS_len_flags>, optimize_optree X<optimize_optree>, traverse_op_tree X<traverse_op_tree> =item Pad Data Structures CX_CURPAD_SAVE X<CX_CURPAD_SAVE>, CX_CURPAD_SV X<CX_CURPAD_SV>, PAD_BASE_SV X<PAD_BASE_SV>, PAD_CLONE_VARS X<PAD_CLONE_VARS>, PAD_COMPNAME_FLAGS X<PAD_COMPNAME_FLAGS>, PAD_COMPNAME_GEN X<PAD_COMPNAME_GEN>, PAD_COMPNAME_GEN_set X<PAD_COMPNAME_GEN_set>, PAD_COMPNAME_OURSTASH X<PAD_COMPNAME_OURSTASH>, PAD_COMPNAME_PV X<PAD_COMPNAME_PV>, PAD_COMPNAME_TYPE X<PAD_COMPNAME_TYPE>, PadnameIsOUR X<PadnameIsOUR>, PadnameIsSTATE X<PadnameIsSTATE>, PadnameOURSTASH X<PadnameOURSTASH>, PadnameOUTER X<PadnameOUTER>, PadnameTYPE X<PadnameTYPE>, PAD_RESTORE_LOCAL X<PAD_RESTORE_LOCAL>, PAD_SAVE_LOCAL X<PAD_SAVE_LOCAL>, PAD_SAVE_SETNULLPAD X<PAD_SAVE_SETNULLPAD>, PAD_SETSV X<PAD_SETSV>, PAD_SET_CUR X<PAD_SET_CUR>, PAD_SET_CUR_NOSAVE X<PAD_SET_CUR_NOSAVE>, PAD_SV X<PAD_SV>, PAD_SVl X<PAD_SVl>, SAVECLEARSV X<SAVECLEARSV>, SAVECOMPPAD X<SAVECOMPPAD>, SAVEPADSV X<SAVEPADSV> =item Per-Interpreter Variables PL_DBsingle X<PL_DBsingle>, PL_DBsub X<PL_DBsub>, PL_DBtrace X<PL_DBtrace>, PL_dowarn X<PL_dowarn>, PL_last_in_gv X<PL_last_in_gv>, PL_ofsgv X<PL_ofsgv>, PL_rs X<PL_rs> =item Stack Manipulation Macros djSP X<djSP>, LVRET X<LVRET> =item SV Flags SVt_INVLIST X<SVt_INVLIST> =item SV Manipulation Functions sv_2num X<sv_2num>, sv_add_arena X<sv_add_arena>, sv_clean_all X<sv_clean_all>, sv_clean_objs X<sv_clean_objs>, sv_free_arenas X<sv_free_arenas>, SvTHINKFIRST X<SvTHINKFIRST> =item Unicode Support find_uninit_var X<find_uninit_var>, isSCRIPT_RUN X<isSCRIPT_RUN>, is_utf8_non_invariant_string X<is_utf8_non_invariant_string>, report_uninit X<report_uninit>, utf8_to_uvuni_buf X<utf8_to_uvuni_buf>, uvoffuni_to_utf8_flags X<uvoffuni_to_utf8_flags>, valid_utf8_to_uvchr X<valid_utf8_to_uvchr>, variant_under_utf8_count X<variant_under_utf8_count> =item Undocumented functions ASCII_TO_NEED X<ASCII_TO_NEED>, NATIVE_TO_NEED X<NATIVE_TO_NEED>, POPMARK X<POPMARK>, PadnameIN_SCOPE X<PadnameIN_SCOPE>, PerlIO_restore_errno X<PerlIO_restore_errno>, PerlIO_save_errno X<PerlIO_save_errno>, PerlLIO_dup2_cloexec X<PerlLIO_dup2_cloexec>, PerlLIO_dup_cloexec X<PerlLIO_dup_cloexec>, PerlLIO_open3_cloexec X<PerlLIO_open3_cloexec>, PerlLIO_open_cloexec X<PerlLIO_open_cloexec>, PerlProc_pipe_cloexec X<PerlProc_pipe_cloexec>, PerlSock_accept_cloexec X<PerlSock_accept_cloexec>, PerlSock_socket_cloexec X<PerlSock_socket_cloexec>, PerlSock_socketpair_cloexec X<PerlSock_socketpair_cloexec>, ReANY X<ReANY>, Slab_Alloc X<Slab_Alloc>, Slab_Free X<Slab_Free>, Slab_to_ro X<Slab_to_ro>, Slab_to_rw X<Slab_to_rw>, TOPMARK X<TOPMARK>, _add_range_to_invlist X<_add_range_to_invlist>, _byte_dump_string X<_byte_dump_string>, _force_out_malformed_utf8_message X<_force_out_malformed_utf8_message>, _inverse_folds X<_inverse_folds>, _invlistEQ X<_invlistEQ>, _invlist_array_init X<_invlist_array_init>, _invlist_contains_cp X<_invlist_contains_cp>, _invlist_dump X<_invlist_dump>, _invlist_intersection X<_invlist_intersection>, _invlist_intersection_maybe_complement_2nd X<_invlist_intersection_maybe_complement_2nd>, _invlist_invert X<_invlist_invert>, _invlist_len X<_invlist_len>, _invlist_search X<_invlist_search>, _invlist_subtract X<_invlist_subtract>, _invlist_union X<_invlist_union>, _invlist_union_maybe_complement_2nd X<_invlist_union_maybe_complement_2nd>, _is_cur_LC_category_utf8 X<_is_cur_LC_category_utf8>, _is_in_locale_category X<_is_in_locale_category>, _is_uni_FOO X<_is_uni_FOO>, _is_uni_perl_idcont X<_is_uni_perl_idcont>, _is_uni_perl_idstart X<_is_uni_perl_idstart>, _is_utf8_FOO X<_is_utf8_FOO>, _is_utf8_perl_idcont X<_is_utf8_perl_idcont>, _is_utf8_perl_idstart X<_is_utf8_perl_idstart>, _mem_collxfrm X<_mem_collxfrm>, _new_invlist X<_new_invlist>, _new_invlist_C_array X<_new_invlist_C_array>, _setup_canned_invlist X<_setup_canned_invlist>, _to_fold_latin1 X<_to_fold_latin1>, _to_uni_fold_flags X<_to_uni_fold_flags>, _to_upper_title_latin1 X<_to_upper_title_latin1>, _to_utf8_fold_flags X<_to_utf8_fold_flags>, _to_utf8_lower_flags X<_to_utf8_lower_flags>, _to_utf8_title_flags X<_to_utf8_title_flags>, _to_utf8_upper_flags X<_to_utf8_upper_flags>, _utf8n_to_uvchr_msgs_helper X<_utf8n_to_uvchr_msgs_helper>, _warn_problematic_locale X<_warn_problematic_locale>, abort_execution X<abort_execution>, add_cp_to_invlist X<add_cp_to_invlist>, alloc_LOGOP X<alloc_LOGOP>, allocmy X<allocmy>, amagic_cmp X<amagic_cmp>, amagic_cmp_desc X<amagic_cmp_desc>, amagic_cmp_locale X<amagic_cmp_locale>, amagic_cmp_locale_desc X<amagic_cmp_locale_desc>, amagic_i_ncmp X<amagic_i_ncmp>, amagic_i_ncmp_desc X<amagic_i_ncmp_desc>, amagic_is_enabled X<amagic_is_enabled>, amagic_ncmp X<amagic_ncmp>, amagic_ncmp_desc X<amagic_ncmp_desc>, append_utf8_from_native_byte X<append_utf8_from_native_byte>, apply X<apply>, av_extend_guts X<av_extend_guts>, av_nonelem X<av_nonelem>, av_reify X<av_reify>, bind_match X<bind_match>, boot_core_PerlIO X<boot_core_PerlIO>, boot_core_UNIVERSAL X<boot_core_UNIVERSAL>, boot_core_mro X<boot_core_mro>, cando X<cando>, check_utf8_print X<check_utf8_print>, ck_anoncode X<ck_anoncode>, ck_backtick X<ck_backtick>, ck_bitop X<ck_bitop>, ck_cmp X<ck_cmp>, ck_concat X<ck_concat>, ck_defined X<ck_defined>, ck_delete X<ck_delete>, ck_each X<ck_each>, ck_entersub_args_core X<ck_entersub_args_core>, ck_eof X<ck_eof>, ck_eval X<ck_eval>, ck_exec X<ck_exec>, ck_exists X<ck_exists>, ck_ftst X<ck_ftst>, ck_fun X<ck_fun>, ck_glob X<ck_glob>, ck_grep X<ck_grep>, ck_index X<ck_index>, ck_isa X<ck_isa>, ck_join X<ck_join>, ck_length X<ck_length>, ck_lfun X<ck_lfun>, ck_listiob X<ck_listiob>, ck_match X<ck_match>, ck_method X<ck_method>, ck_null X<ck_null>, ck_open X<ck_open>, ck_prototype X<ck_prototype>, ck_readline X<ck_readline>, ck_refassign X<ck_refassign>, ck_repeat X<ck_repeat>, ck_require X<ck_require>, ck_return X<ck_return>, ck_rfun X<ck_rfun>, ck_rvconst X<ck_rvconst>, ck_sassign X<ck_sassign>, ck_select X<ck_select>, ck_shift X<ck_shift>, ck_smartmatch X<ck_smartmatch>, ck_sort X<ck_sort>, ck_spair X<ck_spair>, ck_split X<ck_split>, ck_stringify X<ck_stringify>, ck_subr X<ck_subr>, ck_substr X<ck_substr>, ck_svconst X<ck_svconst>, ck_tell X<ck_tell>, ck_trunc X<ck_trunc>, closest_cop X<closest_cop>, cmp_desc X<cmp_desc>, cmp_locale_desc X<cmp_locale_desc>, cmpchain_extend X<cmpchain_extend>, cmpchain_finish X<cmpchain_finish>, cmpchain_start X<cmpchain_start>, cntrl_to_mnemonic X<cntrl_to_mnemonic>, coresub_op X<coresub_op>, create_eval_scope X<create_eval_scope>, croak_caller X<croak_caller>, croak_memory_wrap X<croak_memory_wrap>, croak_no_mem X<croak_no_mem>, croak_popstack X<croak_popstack>, current_re_engine X<current_re_engine>, custom_op_get_field X<custom_op_get_field>, cv_ckproto_len_flags X<cv_ckproto_len_flags>, cv_clone_into X<cv_clone_into>, cv_const_sv_or_av X<cv_const_sv_or_av>, cv_undef_flags X<cv_undef_flags>, cvgv_from_hek X<cvgv_from_hek>, cvgv_set X<cvgv_set>, cvstash_set X<cvstash_set>, deb_stack_all X<deb_stack_all>, defelem_target X<defelem_target>, delete_eval_scope X<delete_eval_scope>, delimcpy_no_escape X<delimcpy_no_escape>, die_unwind X<die_unwind>, do_aexec X<do_aexec>, do_aexec5 X<do_aexec5>, do_eof X<do_eof>, do_exec X<do_exec>, do_exec3 X<do_exec3>, do_ipcctl X<do_ipcctl>, do_ipcget X<do_ipcget>, do_msgrcv X<do_msgrcv>, do_msgsnd X<do_msgsnd>, do_ncmp X<do_ncmp>, do_open6 X<do_open6>, do_open_raw X<do_open_raw>, do_print X<do_print>, do_readline X<do_readline>, do_seek X<do_seek>, do_semop X<do_semop>, do_shmio X<do_shmio>, do_sysseek X<do_sysseek>, do_tell X<do_tell>, do_trans X<do_trans>, do_uniprop_match X<do_uniprop_match>, do_vecget X<do_vecget>, do_vecset X<do_vecset>, do_vop X<do_vop>, does_utf8_overflow X<does_utf8_overflow>, dofile X<dofile>, drand48_init_r X<drand48_init_r>, drand48_r X<drand48_r>, dtrace_probe_call X<dtrace_probe_call>, dtrace_probe_load X<dtrace_probe_load>, dtrace_probe_op X<dtrace_probe_op>, dtrace_probe_phase X<dtrace_probe_phase>, dump_all_perl X<dump_all_perl>, dump_packsubs_perl X<dump_packsubs_perl>, dump_sub_perl X<dump_sub_perl>, dump_sv_child X<dump_sv_child>, dup_warnings X<dup_warnings>, emulate_cop_io X<emulate_cop_io>, find_first_differing_byte_pos X<find_first_differing_byte_pos>, find_lexical_cv X<find_lexical_cv>, find_runcv_where X<find_runcv_where>, find_script X<find_script>, foldEQ_latin1_s2_folded X<foldEQ_latin1_s2_folded>, foldEQ_utf8_flags X<foldEQ_utf8_flags>, form_alien_digit_msg X<form_alien_digit_msg>, form_cp_too_large_msg X<form_cp_too_large_msg>, free_tied_hv_pool X<free_tied_hv_pool>, get_and_check_backslash_N_name X<get_and_check_backslash_N_name>, get_db_sub X<get_db_sub>, get_debug_opts X<get_debug_opts>, get_deprecated_property_msg X<get_deprecated_property_msg>, get_hash_seed X<get_hash_seed>, get_invlist_iter_addr X<get_invlist_iter_addr>, get_invlist_offset_addr X<get_invlist_offset_addr>, get_invlist_previous_index_addr X<get_invlist_previous_index_addr>, get_no_modify X<get_no_modify>, get_opargs X<get_opargs>, get_prop_definition X<get_prop_definition>, get_prop_values X<get_prop_values>, get_re_arg X<get_re_arg>, get_re_gclass_nonbitmap_data X<get_re_gclass_nonbitmap_data>, get_regclass_nonbitmap_data X<get_regclass_nonbitmap_data>, get_regex_charset_name X<get_regex_charset_name>, getenv_len X<getenv_len>, grok_bin_oct_hex X<grok_bin_oct_hex>, grok_bslash_c X<grok_bslash_c>, grok_bslash_o X<grok_bslash_o>, grok_bslash_x X<grok_bslash_x>, gv_fetchmeth_internal X<gv_fetchmeth_internal>, gv_override X<gv_override>, gv_setref X<gv_setref>, gv_stashpvn_internal X<gv_stashpvn_internal>, gv_stashsvpvn_cached X<gv_stashsvpvn_cached>, hfree_next_entry X<hfree_next_entry>, hv_backreferences_p X<hv_backreferences_p>, hv_kill_backrefs X<hv_kill_backrefs>, hv_placeholders_p X<hv_placeholders_p>, hv_pushkv X<hv_pushkv>, hv_undef_flags X<hv_undef_flags>, init_argv_symbols X<init_argv_symbols>, init_constants X<init_constants>, init_dbargs X<init_dbargs>, init_debugger X<init_debugger>, init_i18nl10n X<init_i18nl10n>, init_i18nl14n X<init_i18nl14n>, init_named_cv X<init_named_cv>, init_uniprops X<init_uniprops>, invert X<invert>, invlist_array X<invlist_array>, invlist_clear X<invlist_clear>, invlist_clone X<invlist_clone>, invlist_contents X<invlist_contents>, invlist_extend X<invlist_extend>, invlist_highest X<invlist_highest>, invlist_is_iterating X<invlist_is_iterating>, invlist_iterfinish X<invlist_iterfinish>, invlist_iterinit X<invlist_iterinit>, invlist_iternext X<invlist_iternext>, invlist_lowest X<invlist_lowest>, invlist_max X<invlist_max>, invlist_previous_index X<invlist_previous_index>, invlist_set_len X<invlist_set_len>, invlist_set_previous_index X<invlist_set_previous_index>, invlist_trim X<invlist_trim>, invmap_dump X<invmap_dump>, io_close X<io_close>, isFF_OVERLONG X<isFF_OVERLONG>, isFOO_lc X<isFOO_lc>, is_grapheme X<is_grapheme>, is_invlist X<is_invlist>, is_utf8_char_helper X<is_utf8_char_helper>, is_utf8_common X<is_utf8_common>, is_utf8_overlong_given_start_byte_ok X<is_utf8_overlong_given_start_byte_ok>, jmaybe X<jmaybe>, keyword X<keyword>, keyword_plugin_standard X<keyword_plugin_standard>, list X<list>, load_charnames X<load_charnames>, localize X<localize>, lossless_NV_to_IV X<lossless_NV_to_IV>, magic_clear_all_env X<magic_clear_all_env>, magic_cleararylen_p X<magic_cleararylen_p>, magic_clearenv X<magic_clearenv>, magic_clearisa X<magic_clearisa>, magic_clearpack X<magic_clearpack>, magic_clearsig X<magic_clearsig>, magic_copycallchecker X<magic_copycallchecker>, magic_existspack X<magic_existspack>, magic_freearylen_p X<magic_freearylen_p>, magic_freeovrld X<magic_freeovrld>, magic_get X<magic_get>, magic_getarylen X<magic_getarylen>, magic_getdebugvar X<magic_getdebugvar>, magic_getdefelem X<magic_getdefelem>, magic_getnkeys X<magic_getnkeys>, magic_getpack X<magic_getpack>, magic_getpos X<magic_getpos>, magic_getsig X<magic_getsig>, magic_getsubstr X<magic_getsubstr>, magic_gettaint X<magic_gettaint>, magic_getuvar X<magic_getuvar>, magic_getvec X<magic_getvec>, magic_killbackrefs X<magic_killbackrefs>, magic_nextpack X<magic_nextpack>, magic_regdata_cnt X<magic_regdata_cnt>, magic_regdatum_get X<magic_regdatum_get>, magic_regdatum_set X<magic_regdatum_set>, magic_scalarpack X<magic_scalarpack>, magic_set X<magic_set>, magic_set_all_env X<magic_set_all_env>, magic_setarylen X<magic_setarylen>, magic_setcollxfrm X<magic_setcollxfrm>, magic_setdbline X<magic_setdbline>, magic_setdebugvar X<magic_setdebugvar>, magic_setdefelem X<magic_setdefelem>, magic_setenv X<magic_setenv>, magic_setisa X<magic_setisa>, magic_setlvref X<magic_setlvref>, magic_setmglob X<magic_setmglob>, magic_setnkeys X<magic_setnkeys>, magic_setnonelem X<magic_setnonelem>, magic_setpack X<magic_setpack>, magic_setpos X<magic_setpos>, magic_setregexp X<magic_setregexp>, magic_setsig X<magic_setsig>, magic_setsubstr X<magic_setsubstr>, magic_settaint X<magic_settaint>, magic_setutf8 X<magic_setutf8>, magic_setuvar X<magic_setuvar>, magic_setvec X<magic_setvec>, magic_sizepack X<magic_sizepack>, magic_wipepack X<magic_wipepack>, malloc_good_size X<malloc_good_size>, malloced_size X<malloced_size>, mem_collxfrm X<mem_collxfrm>, mem_log_alloc X<mem_log_alloc>, mem_log_free X<mem_log_free>, mem_log_realloc X<mem_log_realloc>, mg_find_mglob X<mg_find_mglob>, mode_from_discipline X<mode_from_discipline>, more_bodies X<more_bodies>, mortal_getenv X<mortal_getenv>, mro_meta_dup X<mro_meta_dup>, mro_meta_init X<mro_meta_init>, multiconcat_stringify X<multiconcat_stringify>, multideref_stringify X<multideref_stringify>, my_atof2 X<my_atof2>, my_atof3 X<my_atof3>, my_attrs X<my_attrs>, my_clearenv X<my_clearenv>, my_lstat_flags X<my_lstat_flags>, my_memrchr X<my_memrchr>, my_mkostemp X<my_mkostemp>, my_mkostemp_cloexec X<my_mkostemp_cloexec>, my_mkstemp X<my_mkstemp>, my_mkstemp_cloexec X<my_mkstemp_cloexec>, my_stat_flags X<my_stat_flags>, my_strerror X<my_strerror>, my_unexec X<my_unexec>, newGP X<newGP>, newMETHOP_internal X<newMETHOP_internal>, newSTUB X<newSTUB>, newSVavdefelem X<newSVavdefelem>, newXS_deffile X<newXS_deffile>, new_warnings_bitfield X<new_warnings_bitfield>, nextargv X<nextargv>, noperl_die X<noperl_die>, notify_parser_that_changed_to_utf8 X<notify_parser_that_changed_to_utf8>, oopsAV X<oopsAV>, oopsHV X<oopsHV>, op_clear X<op_clear>, op_integerize X<op_integerize>, op_lvalue_flags X<op_lvalue_flags>, op_refcnt_dec X<op_refcnt_dec>, op_refcnt_inc X<op_refcnt_inc>, op_relocate_sv X<op_relocate_sv>, op_std_init X<op_std_init>, op_unscope X<op_unscope>, opmethod_stash X<opmethod_stash>, opslab_force_free X<opslab_force_free>, opslab_free X<opslab_free>, opslab_free_nopad X<opslab_free_nopad>, package X<package>, package_version X<package_version>, pad_add_weakref X<pad_add_weakref>, padlist_store X<padlist_store>, padname_free X<padname_free>, padnamelist_free X<padnamelist_free>, parse_unicode_opts X<parse_unicode_opts>, parser_free X<parser_free>, parser_free_nexttoke_ops X<parser_free_nexttoke_ops>, path_is_searchable X<path_is_searchable>, peep X<peep>, pmruntime X<pmruntime>, populate_isa X<populate_isa>, ptr_hash X<ptr_hash>, qerror X<qerror>, re_exec_indentf X<re_exec_indentf>, re_indentf X<re_indentf>, re_intuit_start X<re_intuit_start>, re_intuit_string X<re_intuit_string>, re_op_compile X<re_op_compile>, re_printf X<re_printf>, reg_named_buff X<reg_named_buff>, reg_named_buff_iter X<reg_named_buff_iter>, reg_numbered_buff_fetch X<reg_numbered_buff_fetch>, reg_numbered_buff_length X<reg_numbered_buff_length>, reg_numbered_buff_store X<reg_numbered_buff_store>, reg_qr_package X<reg_qr_package>, reg_skipcomment X<reg_skipcomment>, reg_temp_copy X<reg_temp_copy>, regcurly X<regcurly>, regprop X<regprop>, report_evil_fh X<report_evil_fh>, report_redefined_cv X<report_redefined_cv>, report_wrongway_fh X<report_wrongway_fh>, rpeep X<rpeep>, rsignal_restore X<rsignal_restore>, rsignal_save X<rsignal_save>, rxres_save X<rxres_save>, same_dirent X<same_dirent>, save_strlen X<save_strlen>, save_to_buffer X<save_to_buffer>, sawparens X<sawparens>, scalar X<scalar>, scalarvoid X<scalarvoid>, scan_str X<scan_str>, scan_word X<scan_word>, set_caret_X X<set_caret_X>, set_numeric_standard X<set_numeric_standard>, set_numeric_underlying X<set_numeric_underlying>, set_padlist X<set_padlist>, setfd_cloexec X<setfd_cloexec>, setfd_cloexec_for_nonsysfd X<setfd_cloexec_for_nonsysfd>, setfd_cloexec_or_inhexec_by_sysfdness X<setfd_cloexec_or_inhexec_by_sysfdness>, setfd_inhexec X<setfd_inhexec>, setfd_inhexec_for_sysfd X<setfd_inhexec_for_sysfd>, should_warn_nl X<should_warn_nl>, should_we_output_Debug_r X<should_we_output_Debug_r>, sighandler X<sighandler>, sighandler1 X<sighandler1>, sighandler3 X<sighandler3>, skipspace_flags X<skipspace_flags>, softref2xv X<softref2xv>, sortsv_flags_impl X<sortsv_flags_impl>, sub_crush_depth X<sub_crush_depth>, sv_add_backref X<sv_add_backref>, sv_buf_to_ro X<sv_buf_to_ro>, sv_del_backref X<sv_del_backref>, sv_free2 X<sv_free2>, sv_i_ncmp X<sv_i_ncmp>, sv_i_ncmp_desc X<sv_i_ncmp_desc>, sv_kill_backrefs X<sv_kill_backrefs>, sv_len_utf8_nomg X<sv_len_utf8_nomg>, sv_magicext_mglob X<sv_magicext_mglob>, sv_ncmp X<sv_ncmp>, sv_ncmp_desc X<sv_ncmp_desc>, sv_only_taint_gmagic X<sv_only_taint_gmagic>, sv_or_pv_pos_u2b X<sv_or_pv_pos_u2b>, sv_resetpvn X<sv_resetpvn>, sv_sethek X<sv_sethek>, sv_setsv_cow X<sv_setsv_cow>, sv_unglob X<sv_unglob>, tied_method X<tied_method>, tmps_grow_p X<tmps_grow_p>, to_uni_fold X<to_uni_fold>, to_uni_lower X<to_uni_lower>, to_uni_title X<to_uni_title>, to_uni_upper X<to_uni_upper>, translate_substr_offsets X<translate_substr_offsets>, try_amagic_bin X<try_amagic_bin>, try_amagic_un X<try_amagic_un>, uiv_2buf X<uiv_2buf>, unshare_hek X<unshare_hek>, utf16_to_utf8 X<utf16_to_utf8>, utf16_to_utf8_reversed X<utf16_to_utf8_reversed>, utf8_to_uvchr_buf_helper X<utf8_to_uvchr_buf_helper>, utilize X<utilize>, uvoffuni_to_utf8_flags_msgs X<uvoffuni_to_utf8_flags_msgs>, uvuni_to_utf8 X<uvuni_to_utf8>, valid_utf8_to_uvuni X<valid_utf8_to_uvuni>, variant_byte_number X<variant_byte_number>, varname X<varname>, vivify_defelem X<vivify_defelem>, vivify_ref X<vivify_ref>, wait4pid X<wait4pid>, was_lvalue_sub X<was_lvalue_sub>, watch X<watch>, win32_croak_not_implemented X<win32_croak_not_implemented>, write_to_stderr X<write_to_stderr>, xs_boot_epilog X<xs_boot_epilog>, xs_handshake X<xs_handshake>, yyerror X<yyerror>, yyerror_pv X<yyerror_pv>, yyerror_pvn X<yyerror_pvn>, yylex X<yylex>, yyparse X<yyparse>, yyquit X<yyquit>, yyunlex X<yyunlex> =item AUTHORS =item SEE ALSO =back =head2 perliol - C API for Perl's implementation of IO in Layers. =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item History and Background =item Basic Structure =item Layers vs Disciplines =item Data Structures =item Functions and Attributes =item Per-instance Data =item Layers in action. =item Per-instance flag bits PERLIO_F_EOF, PERLIO_F_CANWRITE, PERLIO_F_CANREAD, PERLIO_F_ERROR, PERLIO_F_TRUNCATE, PERLIO_F_APPEND, PERLIO_F_CRLF, PERLIO_F_UTF8, PERLIO_F_UNBUF, PERLIO_F_WRBUF, PERLIO_F_RDBUF, PERLIO_F_LINEBUF, PERLIO_F_TEMP, PERLIO_F_OPEN, PERLIO_F_FASTGETS =item Methods in Detail fsize, name, size, kind, PERLIO_K_BUFFERED, PERLIO_K_RAW, PERLIO_K_CANCRLF, PERLIO_K_FASTGETS, PERLIO_K_MULTIARG, Pushed, Popped, Open, Binmode, Getarg, Fileno, Dup, Read, Write, Seek, Tell, Close, Flush, Fill, Eof, Error, Clearerr, Setlinebuf, Get_base, Get_bufsiz, Get_ptr, Get_cnt, Set_ptrcnt =item Utilities =item Implementing PerlIO Layers C implementations, Perl implementations =item Core Layers "unix", "perlio", "stdio", "crlf", "mmap", "pending", "raw", "utf8" =item Extension Layers ":encoding", ":scalar", ":via" =back =item TODO =back =head2 perlapio - perl's IO abstraction interface. =over 4 =item SYNOPSIS =item DESCRIPTION 1. USE_STDIO, 2. USE_PERLIO, B<PerlIO_stdin()>, B<PerlIO_stdout()>, B<PerlIO_stderr()>, B<PerlIO_open(path, mode)>, B<PerlIO_fdopen(fd,mode)>, B<PerlIO_reopen(path,mode,f)>, B<PerlIO_printf(f,fmt,...)>, B<PerlIO_vprintf(f,fmt,a)>, B<PerlIO_stdoutf(fmt,...)>, B<PerlIO_read(f,buf,count)>, B<PerlIO_write(f,buf,count)>, B<PerlIO_close(f)>, B<PerlIO_puts(f,s)>, B<PerlIO_putc(f,c)>, B<PerlIO_ungetc(f,c)>, B<PerlIO_getc(f)>, B<PerlIO_eof(f)>, B<PerlIO_error(f)>, B<PerlIO_fileno(f)>, B<PerlIO_clearerr(f)>, B<PerlIO_flush(f)>, B<PerlIO_seek(f,offset,whence)>, B<PerlIO_tell(f)>, B<PerlIO_getpos(f,p)>, B<PerlIO_setpos(f,p)>, B<PerlIO_rewind(f)>, B<PerlIO_tmpfile()>, B<PerlIO_setlinebuf(f)> =over 4 =item Co-existence with stdio B<PerlIO_importFILE(f,mode)>, B<PerlIO_exportFILE(f,mode)>, B<PerlIO_releaseFILE(p,f)>, B<PerlIO_findFILE(f)> =item "Fast gets" Functions B<PerlIO_fast_gets(f)>, B<PerlIO_has_cntptr(f)>, B<PerlIO_get_cnt(f)>, B<PerlIO_get_ptr(f)>, B<PerlIO_set_ptrcnt(f,p,c)>, B<PerlIO_canset_cnt(f)>, B<PerlIO_set_cnt(f,c)>, B<PerlIO_has_base(f)>, B<PerlIO_get_base(f)>, B<PerlIO_get_bufsiz(f)> =item Other Functions PerlIO_apply_layers(f,mode,layers), PerlIO_binmode(f,ptype,imode,layers), 'E<lt>' read, 'E<gt>' write, '+' read/write, PerlIO_debug(fmt,...) =back =back =head2 perlhack - How to hack on Perl =over 4 =item DESCRIPTION =item SUPER QUICK PATCH GUIDE Check out the source repository, Ensure you're following the latest advice, Create a branch for your change, Make your change, Test your change, Commit your change, Send your change to the Perl issue tracker, Thank you, Acknowledgement, Next time =item BUG REPORTING =item PERL 5 PORTERS =over 4 =item perl-changes mailing list =item #p5p on IRC =back =item GETTING THE PERL SOURCE =over 4 =item Read access via Git =item Read access via the web =item Read access via rsync =item Write access via git =back =item PATCHING PERL =over 4 =item Submitting patches =item Getting your patch accepted Why, What, How =item Patching a core module =item Updating perldelta =item What makes for a good patch? =back =item TESTING F<t/base>, F<t/comp> and F<t/opbasic>, All other subdirectories of F<t/>, Test files not found under F<t/> =over 4 =item Special C<make test> targets test_porting, minitest, test.valgrind check.valgrind, test_harness, test-notty test_notty =item Parallel tests =item Running tests by hand =item Using F<t/harness> for testing -v, -torture, -re=PATTERN, -re LIST OF PATTERNS, PERL_CORE=1, PERL_DESTRUCT_LEVEL=2, PERL, PERL_SKIP_TTY_TEST, PERL_TEST_Net_Ping, PERL_TEST_NOVREXX, PERL_TEST_NUMCONVERTS, PERL_TEST_MEMORY =item Performance testing =item Building perl at older commits =back =item MORE READING FOR GUTS HACKERS L<perlsource>, L<perlinterp>, L<perlhacktut>, L<perlhacktips>, L<perlguts>, L<perlxstut> and L<perlxs>, L<perlapi>, F<Porting/pumpkin.pod> =item CPAN TESTERS AND PERL SMOKERS =item WHAT NEXT? =over 4 =item "The Road goes ever on and on, down from the door where it began." =item Metaphoric Quotations =back =item AUTHOR =back =head2 perlsource - A guide to the Perl source tree =over 4 =item DESCRIPTION =item FINDING YOUR WAY AROUND =over 4 =item C code =item Core modules F<lib/>, F<ext/>, F<dist/>, F<cpan/> =item Tests Module tests, F<t/base/>, F<t/cmd/>, F<t/comp/>, F<t/io/>, F<t/mro/>, F<t/op/>, F<t/opbasic/>, F<t/re/>, F<t/run/>, F<t/uni/>, F<t/win32/>, F<t/porting/>, F<t/lib/> =item Documentation =item Hacking tools and documentation F<check*>, F<Maintainers>, F<Maintainers.pl>, and F<Maintainers.pm>, F<podtidy> =item Build system =item F<AUTHORS> =item F<MANIFEST> =back =back =head2 perlinterp - An overview of the Perl interpreter =over 4 =item DESCRIPTION =item ELEMENTS OF THE INTERPRETER =over 4 =item Startup =item Parsing =item Optimization =item Running =item Exception handing =item INTERNAL VARIABLE TYPES =back =item OP TREES =item STACKS =over 4 =item Argument stack =item Mark stack =item Save stack =back =item MILLIONS OF MACROS =item FURTHER READING =back =head2 perlhacktut - Walk through the creation of a simple C code patch =over 4 =item DESCRIPTION =item EXAMPLE OF A SIMPLE PATCH =over 4 =item Writing the patch =item Testing the patch =item Documenting the patch =item Submit =back =item AUTHOR =back =head2 perlhacktips - Tips for Perl core C code hacking =over 4 =item DESCRIPTION =item COMMON PROBLEMS =over 4 =item Perl environment problems =item Portability problems =item Problematic System Interfaces =item Security problems =back =item DEBUGGING =over 4 =item Poking at Perl =item Using a source-level debugger run [args], break function_name, break source.c:xxx, step, next, continue, finish, 'enter', ptype, print =item gdb macro support =item Dumping Perl Data Structures =item Using gdb to look at specific parts of a program =item Using gdb to look at what the parser/lexer are doing =back =item SOURCE CODE STATIC ANALYSIS =over 4 =item lint =item Coverity =item HP-UX cadvise (Code Advisor) =item cpd (cut-and-paste detector) =item gcc warnings =item Warnings of other C compilers =back =item MEMORY DEBUGGERS =over 4 =item valgrind =item AddressSanitizer -Dcc=clang, -Accflags=-fsanitize=address, -Aldflags=-fsanitize=address, -Alddlflags=-shared\ -fsanitize=address, -fsanitize-blacklist=`pwd`/asan_ignore =back =item PROFILING =over 4 =item Gprof Profiling -a, -b, -e routine, -f routine, -s, -z =item GCC gcov Profiling =back =item MISCELLANEOUS TRICKS =over 4 =item PERL_DESTRUCT_LEVEL =item PERL_MEM_LOG =item DDD over gdb =item C backtrace Linux, OS X, get_c_backtrace, free_c_backtrace, get_c_backtrace_dump, dump_c_backtrace =item Poison =item Read-only optrees =item When is a bool not a bool? =item The .i Targets =back =item AUTHOR =back =head2 perlpolicy - Various and sundry policies and commitments related to the Perl core =over 4 =item DESCRIPTION =item GOVERNANCE =over 4 =item Perl 5 Porters =back =item MAINTENANCE AND SUPPORT =item BACKWARD COMPATIBILITY AND DEPRECATION =over 4 =item Terminology experimental, deprecated, discouraged, removed =back =item MAINTENANCE BRANCHES =over 4 =item Getting changes into a maint branch =back =item CONTRIBUTED MODULES =over 4 =item A Social Contract about Artistic Control =back =item DOCUMENTATION =item STANDARDS OF CONDUCT =item CREDITS =back =head2 perlgov - Perl Rules of Governance =over 4 =item PREAMBLE =item Mandate =item Definitions "Core Team", "Steering Council", "Vote Administrator" =over 4 =item The Core Team =item The Steering Council =item The Vote Administrator =back =item Core Team Members Abhijit Menon-Sen (inactive), Andy Dougherty, Chad Granum, Chris 'BinGOs' Williams, Craig Berry, Dagfinn Ilmari Mannsåker, Dave Mitchell, David Golden, H. Merijn Brand, Hugo van der Sanden, James E Keenan, Jan Dubois (inactive), Jesse Vincent (inactive), Karen Etheridge, Karl Williamson, Leon Timmermans, Matthew Horsfall, Max Maischein, Nicholas Clark, Nicolas R, Paul "LeoNerd" Evans, Philippe "BooK" Bruhat, Ricardo Signes, Sawyer X, Steve Hay, Stuart Mackintosh, Todd Rinaldo, Tony Cook =back =head2 perlgit - Detailed information about git and the Perl repository =over 4 =item DESCRIPTION =item CLONING THE REPOSITORY =item WORKING WITH THE REPOSITORY =over 4 =item Finding out your status =item Patch workflow =item A note on derived files =item Cleaning a working directory =item Bisecting =item Topic branches and rewriting history =item Grafts =back =item WRITE ACCESS TO THE GIT REPOSITORY =over 4 =item Accepting a patch =item Committing to blead =item On merging and rebasing =item Committing to maintenance versions =item Using a smoke-me branch to test changes =back =back =head2 perlbook - Books about and related to Perl =over 4 =item DESCRIPTION =over 4 =item The most popular books I<Programming Perl> (the "Camel Book"):, I<The Perl Cookbook> (the "Ram Book"):, I<Learning Perl> (the "Llama Book"), I<Intermediate Perl> (the "Alpaca Book") =item References I<Perl 5 Pocket Reference>, I<Perl Debugger Pocket Reference>, I<Regular Expression Pocket Reference> =item Tutorials I<Beginning Perl>, I<Learning Perl> (the "Llama Book"), I<Intermediate Perl> (the "Alpaca Book"), I<Mastering Perl>, I<Effective Perl Programming> =item Task-Oriented I<Writing Perl Modules for CPAN>, I<The Perl Cookbook>, I<Automating System Administration with Perl>, I<Real World SQL Server Administration with Perl> =item Special Topics I<Regular Expressions Cookbook>, I<Programming the Perl DBI>, I<Perl Best Practices>, I<Higher-Order Perl>, I<Mastering Regular Expressions>, I<Network Programming with Perl>, I<Perl Template Toolkit>, I<Object Oriented Perl>, I<Data Munging with Perl>, I<Mastering Perl/Tk>, I<Extending and Embedding Perl>, I<Pro Perl Debugging> =item Free (as in beer) books =item Other interesting, non-Perl books I<Programming Pearls>, I<More Programming Pearls> =item A note on freshness =item Get your book listed =back =back =head2 perlcommunity - a brief overview of the Perl community =over 4 =item DESCRIPTION =over 4 =item Where to Find the Community =item Mailing Lists and Newsgroups =item IRC =item Websites L<https://perl.com/>, L<http://blogs.perl.org/>, L<http://perlsphere.net/>, L<http://perlweekly.com/>, L<https://www.perlmonks.org/>, L<https://stackoverflow.com/>, L<http://prepan.org/> =item User Groups =item Workshops =item Hackathons =item Conventions The Perl Conference, OSCON =item Calendar of Perl Events =back =item AUTHOR =back =head2 perldoc - Look up Perl documentation in Pod format. =over 4 =item SYNOPSIS =item DESCRIPTION =item OPTIONS B<-h>, B<-D>, B<-t>, B<-u>, B<-m> I<module>, B<-l>, B<-U>, B<-F>, B<-f> I<perlfunc>, B<-q> I<perlfaq-search-regexp>, B<-a> I<perlapifunc>, B<-v> I<perlvar>, B<-T>, B<-d> I<destination-filename>, B<-o> I<output-formatname>, B<-M> I<module-name>, B<-w> I<option:value> or B<-w> I<option>, B<-X>, B<-L> I<language_code>, B<PageName|ModuleName|ProgramName|URL>, B<-n> I<some-formatter>, B<-r>, B<-i>, B<-V> =item SECURITY =item ENVIRONMENT =item CHANGES =item SEE ALSO =item AUTHOR =back =head2 perlhist - the Perl history records =over 4 =item DESCRIPTION =item INTRODUCTION =item THE KEEPERS OF THE PUMPKIN =over 4 =item PUMPKIN? =back =item THE RECORDS =over 4 =item SELECTED RELEASE SIZES =item SELECTED PATCH SIZES =back =item THE KEEPERS OF THE RECORDS =back =head2 perldelta - what is new for perl v5.32.1 =over 4 =item DESCRIPTION =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Documentation =over 4 =item New Documentation =item Changes to Existing Documentation =back =item Diagnostics =over 4 =item Changes to Existing Diagnostics =back =item Configuration and Compilation =item Testing =item Platform Support =over 4 =item Platform-Specific Notes MacOS (Darwin), Minix =back =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item Give Thanks =item SEE ALSO =back =head2 perl5321delta, perldelta - what is new for perl v5.32.1 =over 4 =item DESCRIPTION =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Documentation =over 4 =item New Documentation =item Changes to Existing Documentation =back =item Diagnostics =over 4 =item Changes to Existing Diagnostics =back =item Configuration and Compilation =item Testing =item Platform Support =over 4 =item Platform-Specific Notes MacOS (Darwin), Minix =back =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item Give Thanks =item SEE ALSO =back =head2 perl5320delta - what is new for perl v5.32.0 =over 4 =item DESCRIPTION =item Core Enhancements =over 4 =item The isa Operator =item Unicode 13.0 is supported =item Chained comparisons capability =item New Unicode properties C<Identifier_Status> and C<Identifier_Type> supported =item It is now possible to write C<qr/\p{Name=...}/>, or C<qr!\p{na=/(SMILING|GRINNING) FACE/}!> =item Improvement of C<POSIX::mblen()>, C<mbtowc>, and C<wctomb> =item Alpha assertions are no longer experimental =item Script runs are no longer experimental =item Feature checks are now faster =item Perl is now developed on GitHub =item Compiled patterns can now be dumped before optimization =back =item Security =over 4 =item [CVE-2020-10543] Buffer overflow caused by a crafted regular expression =item [CVE-2020-10878] Integer overflow via malformed bytecode produced by a crafted regular expression =item [CVE-2020-12723] Buffer overflow caused by a crafted regular expression =item Additional Note =back =item Incompatible Changes =over 4 =item Certain pattern matching features are now prohibited in compiling Unicode property value wildcard subpatterns =item Unused functions C<POSIX::mbstowcs> and C<POSIX::wcstombs> are removed =item A bug fix for C<(?[...])> may have caused some patterns to no longer compile =item C<\p{I<user-defined>}> properties now always override official Unicode ones =item Modifiable variables are no longer permitted in constants =item Use of L<C<vec>|perlfunc/vec EXPR,OFFSET,BITS> on strings with code points above 0xFF is forbidden =item Use of code points over 0xFF in string bitwise operators =item C<Sys::Hostname::hostname()> does not accept arguments =item Plain "0" string now treated as a number for range operator =item C<\K> now disallowed in look-ahead and look-behind assertions =back =item Performance Enhancements =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =item Removed Modules and Pragmata =back =item Documentation =over 4 =item Changes to Existing Documentation C<caller>, C<__FILE__>, C<__LINE__>, C<return>, C<open> =back =item Diagnostics =over 4 =item New Diagnostics =item Changes to Existing Diagnostics =back =item Utility Changes =over 4 =item L<perlbug> The bug tracker homepage URL now points to GitHub =item L<streamzip> =back =item Configuration and Compilation =over 4 =item F<Configure> =back =item Testing =item Platform Support =over 4 =item Discontinued Platforms Windows CE =item Platform-Specific Notes Linux, NetBSD 8.0, Windows, Solaris, VMS, z/OS =back =item Internal Changes =item Selected Bug Fixes =item Obituary =item Acknowledgements =item Reporting Bugs =item Give Thanks =item SEE ALSO =back =head2 perl5303delta - what is new for perl v5.30.3 =over 4 =item DESCRIPTION =item Security =over 4 =item [CVE-2020-10543] Buffer overflow caused by a crafted regular expression =item [CVE-2020-10878] Integer overflow via malformed bytecode produced by a crafted regular expression =item [CVE-2020-12723] Buffer overflow caused by a crafted regular expression =item Additional Note =back =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Testing =item Acknowledgements =item Reporting Bugs =item Give Thanks =item SEE ALSO =back =head2 perl5302delta - what is new for perl v5.30.2 =over 4 =item DESCRIPTION =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Documentation =over 4 =item Changes to Existing Documentation =back =item Configuration and Compilation =item Testing =item Platform Support =over 4 =item Platform-Specific Notes Windows =back =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item Give Thanks =item SEE ALSO =back =head2 perl5301delta - what is new for perl v5.30.1 =over 4 =item DESCRIPTION =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Documentation =over 4 =item Changes to Existing Documentation =back =item Configuration and Compilation =item Testing =item Platform Support =over 4 =item Platform-Specific Notes Win32 =back =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item Give Thanks =item SEE ALSO =back =head2 perl5300delta - what is new for perl v5.30.0 =over 4 =item DESCRIPTION =item Notice =item Core Enhancements =over 4 =item Limited variable length lookbehind in regular expression pattern matching is now experimentally supported =item The upper limit C<"n"> specifiable in a regular expression quantifier of the form C<"{m,n}"> has been doubled to 65534 =item Unicode 12.1 is supported =item Wildcards in Unicode property value specifications are now partially supported =item qr'\N{name}' is now supported =item Turkic UTF-8 locales are now seamlessly supported =item It is now possible to compile perl to always use thread-safe locale operations. =item Eliminate opASSIGN macro usage from core =item C<-Drv> now means something on C<-DDEBUGGING> builds =back =item Incompatible Changes =over 4 =item Assigning non-zero to C<$[> is fatal =item Delimiters must now be graphemes =item Some formerly deprecated uses of an unescaped left brace C<"{"> in regular expression patterns are now illegal =item Previously deprecated sysread()/syswrite() on :utf8 handles is now fatal =item my() in false conditional prohibited =item Fatalize $* and $# =item Fatalize unqualified use of dump() =item Remove File::Glob::glob() =item C<pack()> no longer can return malformed UTF-8 =item Any set of digits in the Common script are legal in a script run of another script =item JSON::PP enables allow_nonref by default =back =item Deprecations =over 4 =item In XS code, use of various macros dealing with UTF-8. =back =item Performance Enhancements =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =item Removed Modules and Pragmata =back =item Documentation =over 4 =item Changes to Existing Documentation =back =item Diagnostics =over 4 =item Changes to Existing Diagnostics =back =item Utility Changes =over 4 =item L<xsubpp> =back =item Configuration and Compilation =item Testing =item Platform Support =over 4 =item Platform-Specific Notes HP-UX 11.11, Mac OS X, Minix3, Cygwin, Win32 Mingw, Windows =back =item Internal Changes =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item Give Thanks =item SEE ALSO =back =head2 perl5283delta - what is new for perl v5.28.3 =over 4 =item DESCRIPTION =item Security =over 4 =item [CVE-2020-10543] Buffer overflow caused by a crafted regular expression =item [CVE-2020-10878] Integer overflow via malformed bytecode produced by a crafted regular expression =item [CVE-2020-12723] Buffer overflow caused by a crafted regular expression =item Additional Note =back =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Testing =item Acknowledgements =item Reporting Bugs =item Give Thanks =item SEE ALSO =back =head2 perl5282delta - what is new for perl v5.28.2 =over 4 =item DESCRIPTION =item Incompatible Changes =over 4 =item Any set of digits in the Common script are legal in a script run of another script =back =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Platform Support =over 4 =item Platform-Specific Notes Windows, Mac OS X =back =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item Give Thanks =item SEE ALSO =back =head2 perl5281delta - what is new for perl v5.28.1 =over 4 =item DESCRIPTION =item Security =over 4 =item [CVE-2018-18311] Integer overflow leading to buffer overflow and segmentation fault =item [CVE-2018-18312] Heap-buffer-overflow write in S_regatom (regcomp.c) =back =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item Give Thanks =item SEE ALSO =back =head2 perl5280delta - what is new for perl v5.28.0 =over 4 =item DESCRIPTION =item Core Enhancements =over 4 =item Unicode 10.0 is supported =item L<C<delete>|perlfunc/delete EXPR> on key/value hash slices =item Experimentally, there are now alphabetic synonyms for some regular expression assertions =item Mixed Unicode scripts are now detectable =item In-place editing with C<perl -i> is now safer =item Initialisation of aggregate state variables =item Full-size inode numbers =item The C<sprintf> C<%j> format size modifier is now available with pre-C99 compilers =item Close-on-exec flag set atomically =item String- and number-specific bitwise ops are no longer experimental =item Locales are now thread-safe on systems that support them =item New read-only predefined variable C<${^SAFE_LOCALES}> =back =item Security =over 4 =item [CVE-2017-12837] Heap buffer overflow in regular expression compiler =item [CVE-2017-12883] Buffer over-read in regular expression parser =item [CVE-2017-12814] C<$ENV{$key}> stack buffer overflow on Windows =item Default Hash Function Change =back =item Incompatible Changes =over 4 =item Subroutine attribute and signature order =item Comma-less variable lists in formats are no longer allowed =item The C<:locked> and C<:unique> attributes have been removed =item C<\N{}> with nothing between the braces is now illegal =item Opening the same symbol as both a file and directory handle is no longer allowed =item Use of bare C<< << >> to mean C<< <<"" >> is no longer allowed =item Setting $/ to a reference to a non-positive integer no longer allowed =item Unicode code points with values exceeding C<IV_MAX> are now fatal =item The C<B::OP::terse> method has been removed =item Use of inherited AUTOLOAD for non-methods is no longer allowed =item Use of strings with code points over 0xFF is not allowed for bitwise string operators =item Setting C<${^ENCODING}> to a defined value is now illegal =item Backslash no longer escapes colon in PATH for the C<-S> switch =item the -DH (DEBUG_H) misfeature has been removed =item Yada-yada is now strictly a statement =item Sort algorithm can no longer be specified =item Over-radix digits in floating point literals =item Return type of C<unpackstring()> =back =item Deprecations =over 4 =item Use of L<C<vec>|perlfunc/vec EXPR,OFFSET,BITS> on strings with code points above 0xFF is deprecated =item Some uses of unescaped C<"{"> in regexes are no longer fatal =item Use of unescaped C<"{"> immediately after a C<"("> in regular expression patterns is deprecated =item Assignment to C<$[> will be fatal in Perl 5.30 =item hostname() won't accept arguments in Perl 5.32 =item Module removals B::Debug, L<Locale::Codes> and its associated Country, Currency and Language modules =back =item Performance Enhancements =item Modules and Pragmata =over 4 =item Removal of use vars =item Use of DynaLoader changed to XSLoader in many modules =item Updated Modules and Pragmata =item Removed Modules and Pragmata =back =item Documentation =over 4 =item Changes to Existing Documentation L<perldiag/Variable length lookbehind not implemented in regex mE<sol>%sE<sol>>, "Use of state $_ is experimental" in L<perldiag> =back =item Diagnostics =over 4 =item New Diagnostics =item Changes to Existing Diagnostics =back =item Utility Changes =over 4 =item L<perlbug> =back =item Configuration and Compilation C89 requirement, New probes, HAS_BUILTIN_ADD_OVERFLOW, HAS_BUILTIN_MUL_OVERFLOW, HAS_BUILTIN_SUB_OVERFLOW, HAS_THREAD_SAFE_NL_LANGINFO_L, HAS_LOCALECONV_L, HAS_MBRLEN, HAS_MBRTOWC, HAS_MEMRCHR, HAS_NANOSLEEP, HAS_STRNLEN, HAS_STRTOLD_L, I_WCHAR =item Testing =item Packaging =item Platform Support =over 4 =item Discontinued Platforms PowerUX / Power MAX OS =item Platform-Specific Notes CentOS, Cygwin, Darwin, FreeBSD, VMS, Windows =back =item Internal Changes =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item Give Thanks =item SEE ALSO =back =head2 perl5263delta - what is new for perl v5.26.3 =over 4 =item DESCRIPTION =item Security =over 4 =item [CVE-2018-12015] Directory traversal in module Archive::Tar =item [CVE-2018-18311] Integer overflow leading to buffer overflow and segmentation fault =item [CVE-2018-18312] Heap-buffer-overflow write in S_regatom (regcomp.c) =item [CVE-2018-18313] Heap-buffer-overflow read in S_grok_bslash_N (regcomp.c) =item [CVE-2018-18314] Heap-buffer-overflow write in S_regatom (regcomp.c) =back =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Diagnostics =over 4 =item New Diagnostics =item Changes to Existing Diagnostics =back =item Acknowledgements =item Reporting Bugs =item Give Thanks =item SEE ALSO =back =head2 perl5262delta - what is new for perl v5.26.2 =over 4 =item DESCRIPTION =item Security =over 4 =item [CVE-2018-6797] heap-buffer-overflow (WRITE of size 1) in S_regatom (regcomp.c) =item [CVE-2018-6798] Heap-buffer-overflow in Perl__byte_dump_string (utf8.c) =item [CVE-2018-6913] heap-buffer-overflow in S_pack_rec =item Assertion failure in Perl__core_swash_init (utf8.c) =back =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Documentation =over 4 =item Changes to Existing Documentation =back =item Platform Support =over 4 =item Platform-Specific Notes Windows =back =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item Give Thanks =item SEE ALSO =back =head2 perl5261delta - what is new for perl v5.26.1 =over 4 =item DESCRIPTION =item Security =over 4 =item [CVE-2017-12837] Heap buffer overflow in regular expression compiler =item [CVE-2017-12883] Buffer over-read in regular expression parser =item [CVE-2017-12814] C<$ENV{$key}> stack buffer overflow on Windows =back =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Platform Support =over 4 =item Platform-Specific Notes FreeBSD, Windows =back =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item Give Thanks =item SEE ALSO =back =head2 perl5260delta - what is new for perl v5.26.0 =over 4 =item DESCRIPTION =item Notice C<"."> no longer in C<@INC>, C<do> may now warn, In regular expression patterns, a literal left brace C<"{"> should be escaped =item Core Enhancements =over 4 =item Lexical subroutines are no longer experimental =item Indented Here-documents =item New regular expression modifier C</xx> =item C<@{^CAPTURE}>, C<%{^CAPTURE}>, and C<%{^CAPTURE_ALL}> =item Declaring a reference to a variable =item Unicode 9.0 is now supported =item Use of C<\p{I<script>}> uses the improved Script_Extensions property =item Perl can now do default collation in UTF-8 locales on platforms that support it =item Better locale collation of strings containing embedded C<NUL> characters =item C<CORE> subroutines for hash and array functions callable via reference =item New Hash Function For 64-bit Builds =back =item Security =over 4 =item Removal of the current directory (C<".">) from C<@INC> F<Configure -Udefault_inc_excludes_dot>, C<PERL_USE_UNSAFE_INC>, A new deprecation warning issued by C<do>, Script authors, Installing and using CPAN modules, Module Authors =item Escaped colons and relative paths in PATH =item New C<-Di> switch is now required for PerlIO debugging output =back =item Incompatible Changes =over 4 =item Unescaped literal C<"{"> characters in regular expression patterns are no longer permissible =item C<scalar(%hash)> return signature changed =item C<keys> returned from an lvalue subroutine =item The C<${^ENCODING}> facility has been removed =item C<POSIX::tmpnam()> has been removed =item require ::Foo::Bar is now illegal. =item Literal control character variable names are no longer permissible =item C<NBSP> is no longer permissible in C<\N{...}> =back =item Deprecations =over 4 =item String delimiters that aren't stand-alone graphemes are now deprecated =item C<\cI<X>> that maps to a printable is no longer deprecated =back =item Performance Enhancements New Faster Hash Function on 64 bit builds, readline is faster =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Documentation =over 4 =item New Documentation =item Changes to Existing Documentation =back =item Diagnostics =over 4 =item New Diagnostics =item Changes to Existing Diagnostics =back =item Utility Changes =over 4 =item F<c2ph> and F<pstruct> =item F<Porting/pod_lib.pl> =item F<Porting/sync-with-cpan> =item F<perf/benchmarks> =item F<Porting/checkAUTHORS.pl> =item F<t/porting/regen.t> =item F<utils/h2xs.PL> =item L<perlbug> =back =item Configuration and Compilation =item Testing =item Platform Support =over 4 =item New Platforms NetBSD/VAX =item Platform-Specific Notes Darwin, EBCDIC, HP-UX, Hurd, VAX, VMS, Windows, Linux, OpenBSD 6, FreeBSD, DragonFly BSD =back =item Internal Changes =item Selected Bug Fixes =item Known Problems =item Errata From Previous Releases =item Obituary =item Acknowledgements =item Reporting Bugs =item Give Thanks =item SEE ALSO =back =head2 perl5244delta - what is new for perl v5.24.4 =over 4 =item DESCRIPTION =item Security =over 4 =item [CVE-2018-6797] heap-buffer-overflow (WRITE of size 1) in S_regatom (regcomp.c) =item [CVE-2018-6798] Heap-buffer-overflow in Perl__byte_dump_string (utf8.c) =item [CVE-2018-6913] heap-buffer-overflow in S_pack_rec =item Assertion failure in Perl__core_swash_init (utf8.c) =back =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5243delta - what is new for perl v5.24.3 =over 4 =item DESCRIPTION =item Security =over 4 =item [CVE-2017-12837] Heap buffer overflow in regular expression compiler =item [CVE-2017-12883] Buffer over-read in regular expression parser =item [CVE-2017-12814] C<$ENV{$key}> stack buffer overflow on Windows =back =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Configuration and Compilation =item Platform Support =over 4 =item Platform-Specific Notes VMS, Windows =back =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5242delta - what is new for perl v5.24.2 =over 4 =item DESCRIPTION =item Security =over 4 =item Improved handling of '.' in @INC in base.pm =item "Escaped" colons and relative paths in PATH =back =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5241delta - what is new for perl v5.24.1 =over 4 =item DESCRIPTION =item Security =over 4 =item B<-Di> switch is now required for PerlIO debugging output =item Core modules and tools no longer search F<"."> for optional modules =back =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Documentation =over 4 =item Changes to Existing Documentation =back =item Testing =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5240delta - what is new for perl v5.24.0 =over 4 =item DESCRIPTION =item Core Enhancements =over 4 =item Postfix dereferencing is no longer experimental =item Unicode 8.0 is now supported =item perl will now croak when closing an in-place output file fails =item New C<\b{lb}> boundary in regular expressions =item C<qr/(?[ ])/> now works in UTF-8 locales =item Integer shift (C<< << >> and C<< >> >>) now more explicitly defined =item printf and sprintf now allow reordered precision arguments =item More fields provided to C<sigaction> callback with C<SA_SIGINFO> =item Hashbang redirection to Perl 6 =back =item Security =over 4 =item Set proper umask before calling C<mkstemp(3)> =item Fix out of boundary access in Win32 path handling =item Fix loss of taint in canonpath =item Avoid accessing uninitialized memory in win32 C<crypt()> =item Remove duplicate environment variables from C<environ> =back =item Incompatible Changes =over 4 =item The C<autoderef> feature has been removed =item Lexical $_ has been removed =item C<qr/\b{wb}/> is now tailored to Perl expectations =item Regular expression compilation errors =item C<qr/\N{}/> now disallowed under C<use re "strict"> =item Nested declarations are now disallowed =item The C</\C/> character class has been removed. =item C<chdir('')> no longer chdirs home =item ASCII characters in variable names must now be all visible =item An off by one issue in C<$Carp::MaxArgNums> has been fixed =item Only blanks and tabs are now allowed within C<[...]> within C<(?[...])>. =back =item Deprecations =over 4 =item Using code points above the platform's C<IV_MAX> is now deprecated =item Doing bitwise operations on strings containing code points above 0xFF is deprecated =item C<sysread()>, C<syswrite()>, C<recv()> and C<send()> are deprecated on :utf8 handles =back =item Performance Enhancements =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Documentation =over 4 =item Changes to Existing Documentation =back =item Diagnostics =over 4 =item New Diagnostics =item Changes to Existing Diagnostics =back =item Configuration and Compilation =item Testing =item Platform Support =over 4 =item Platform-Specific Notes AmigaOS, Cygwin, EBCDIC, UTF-EBCDIC extended, EBCDIC C<cmp()> and C<sort()> fixed for UTF-EBCDIC strings, EBCDIC C<tr///> and C<y///> fixed for C<\N{}>, and C<S<use utf8>> ranges, FreeBSD, IRIX, MacOS X, Solaris, Tru64, VMS, Win32, ppc64el, floating point =back =item Internal Changes =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5224delta - what is new for perl v5.22.4 =over 4 =item DESCRIPTION =item Security =over 4 =item Improved handling of '.' in @INC in base.pm =item "Escaped" colons and relative paths in PATH =back =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5223delta - what is new for perl v5.22.3 =over 4 =item DESCRIPTION =item Security =over 4 =item B<-Di> switch is now required for PerlIO debugging output =item Core modules and tools no longer search F<"."> for optional modules =back =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Documentation =over 4 =item Changes to Existing Documentation =back =item Testing =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5222delta - what is new for perl v5.22.2 =over 4 =item DESCRIPTION =item Security =over 4 =item Fix out of boundary access in Win32 path handling =item Fix loss of taint in C<canonpath()> =item Set proper umask before calling C<mkstemp(3)> =item Avoid accessing uninitialized memory in Win32 C<crypt()> =item Remove duplicate environment variables from C<environ> =back =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Documentation =over 4 =item Changes to Existing Documentation =back =item Configuration and Compilation =item Platform Support =over 4 =item Platform-Specific Notes Darwin, OS X/Darwin, ppc64el, Tru64 =back =item Internal Changes =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5221delta - what is new for perl v5.22.1 =over 4 =item DESCRIPTION =item Incompatible Changes =over 4 =item Bounds Checking Constructs =back =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Documentation =over 4 =item Changes to Existing Documentation =back =item Diagnostics =over 4 =item Changes to Existing Diagnostics =back =item Configuration and Compilation =item Platform Support =over 4 =item Platform-Specific Notes IRIX =back =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5220delta - what is new for perl v5.22.0 =over 4 =item DESCRIPTION =item Core Enhancements =over 4 =item New bitwise operators =item New double-diamond operator =item New C<\b> boundaries in regular expressions =item Non-Capturing Regular Expression Flag =item C<use re 'strict'> =item Unicode 7.0 (with correction) is now supported =item S<C<use locale>> can restrict which locale categories are affected =item Perl now supports POSIX 2008 locale currency additions =item Better heuristics on older platforms for determining locale UTF-8ness =item Aliasing via reference =item C<prototype> with no arguments =item New C<:const> subroutine attribute =item C<fileno> now works on directory handles =item List form of pipe open implemented for Win32 =item Assignment to list repetition =item Infinity and NaN (not-a-number) handling improved =item Floating point parsing has been improved =item Packing infinity or not-a-number into a character is now fatal =item Experimental C Backtrace API =back =item Security =over 4 =item Perl is now compiled with C<-fstack-protector-strong> if available =item The L<Safe> module could allow outside packages to be replaced =item Perl is now always compiled with C<-D_FORTIFY_SOURCE=2> if available =back =item Incompatible Changes =over 4 =item Subroutine signatures moved before attributes =item C<&> and C<\&> prototypes accepts only subs =item C<use encoding> is now lexical =item List slices returning empty lists =item C<\N{}> with a sequence of multiple spaces is now a fatal error =item S<C<use UNIVERSAL '...'>> is now a fatal error =item In double-quotish C<\cI<X>>, I<X> must now be a printable ASCII character =item Splitting the tokens C<(?> and C<(*> in regular expressions is now a fatal compilation error. =item C<qr/foo/x> now ignores all Unicode pattern white space =item Comment lines within S<C<(?[ ])>> are now ended only by a C<\n> =item C<(?[...])> operators now follow standard Perl precedence =item Omitting C<%> and C<@> on hash and array names is no longer permitted =item C<"$!"> text is now in English outside the scope of C<use locale> =item C<"$!"> text will be returned in UTF-8 when appropriate =item Support for C<?PATTERN?> without explicit operator has been removed =item C<defined(@array)> and C<defined(%hash)> are now fatal errors =item Using a hash or an array as a reference are now fatal errors =item Changes to the C<*> prototype =back =item Deprecations =over 4 =item Setting C<${^ENCODING}> to anything but C<undef> =item Use of non-graphic characters in single-character variable names =item Inlining of C<sub () { $var }> with observable side-effects =item Use of multiple C</x> regexp modifiers =item Using a NO-BREAK space in a character alias for C<\N{...}> is now deprecated =item A literal C<"{"> should now be escaped in a pattern =item Making all warnings fatal is discouraged =back =item Performance Enhancements =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =item Removed Modules and Pragmata =back =item Documentation =over 4 =item New Documentation =item Changes to Existing Documentation =back =item Diagnostics =over 4 =item New Diagnostics =item Changes to Existing Diagnostics =item Diagnostic Removals =back =item Utility Changes =over 4 =item F<find2perl>, F<s2p> and F<a2p> removal =item L<h2ph> =item L<encguess> =back =item Configuration and Compilation =item Testing =item Platform Support =over 4 =item Regained Platforms IRIX and Tru64 platforms are working again, z/OS running EBCDIC Code Page 1047 =item Discontinued Platforms NeXTSTEP/OPENSTEP =item Platform-Specific Notes EBCDIC, HP-UX, Android, VMS, Win32, OpenBSD, Solaris =back =item Internal Changes =item Selected Bug Fixes =item Known Problems =item Obituary =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5203delta - what is new for perl v5.20.3 =over 4 =item DESCRIPTION =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Documentation =over 4 =item Changes to Existing Documentation =back =item Utility Changes =over 4 =item L<h2ph> =back =item Testing =item Platform Support =over 4 =item Platform-Specific Notes Win32 =back =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5202delta - what is new for perl v5.20.2 =over 4 =item DESCRIPTION =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Documentation =over 4 =item New Documentation =item Changes to Existing Documentation =back =item Diagnostics =over 4 =item Changes to Existing Diagnostics =back =item Testing =item Platform Support =over 4 =item Regained Platforms =back =item Selected Bug Fixes =item Known Problems =item Errata From Previous Releases =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5201delta - what is new for perl v5.20.1 =over 4 =item DESCRIPTION =item Incompatible Changes =item Performance Enhancements =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Documentation =over 4 =item Changes to Existing Documentation =back =item Diagnostics =over 4 =item Changes to Existing Diagnostics =back =item Configuration and Compilation =item Platform Support =over 4 =item Platform-Specific Notes Android, OpenBSD, Solaris, VMS, Windows =back =item Internal Changes =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5200delta - what is new for perl v5.20.0 =over 4 =item DESCRIPTION =item Core Enhancements =over 4 =item Experimental Subroutine signatures =item C<sub>s now take a C<prototype> attribute =item More consistent prototype parsing =item C<rand> now uses a consistent random number generator =item New slice syntax =item Experimental Postfix Dereferencing =item Unicode 6.3 now supported =item New C<\p{Unicode}> regular expression pattern property =item Better 64-bit support =item C<S<use locale>> now works on UTF-8 locales =item C<S<use locale>> now compiles on systems without locale ability =item More locale initialization fallback options =item C<-DL> runtime option now added for tracing locale setting =item B<-F> now implies B<-a> and B<-a> implies B<-n> =item $a and $b warnings exemption =back =item Security =over 4 =item Avoid possible read of free()d memory during parsing =back =item Incompatible Changes =over 4 =item C<do> can no longer be used to call subroutines =item Quote-like escape changes =item Tainting happens under more circumstances; now conforms to documentation =item C<\p{}>, C<\P{}> matching has changed for non-Unicode code points. =item C<\p{All}> has been expanded to match all possible code points =item Data::Dumper's output may change =item Locale decimal point character no longer leaks outside of S<C<use locale>> scope =item Assignments of Windows sockets error codes to $! now prefer F<errno.h> values over WSAGetLastError() values =item Functions C<PerlIO_vsprintf> and C<PerlIO_sprintf> have been removed =back =item Deprecations =over 4 =item The C</\C/> character class =item Literal control characters in variable names =item References to non-integers and non-positive integers in C<$/> =item Character matching routines in POSIX =item Interpreter-based threads are now I<discouraged> =item Module removals L<CGI> and its associated CGI:: packages, L<inc::latest>, L<Package::Constants>, L<Module::Build> and its associated Module::Build:: packages =item Utility removals L<find2perl>, L<s2p>, L<a2p> =back =item Performance Enhancements =item Modules and Pragmata =over 4 =item New Modules and Pragmata =item Updated Modules and Pragmata =back =item Documentation =over 4 =item New Documentation =item Changes to Existing Documentation =back =item Diagnostics =over 4 =item New Diagnostics =item Changes to Existing Diagnostics =back =item Utility Changes =item Configuration and Compilation =item Testing =item Platform Support =over 4 =item New Platforms Android, Bitrig, FreeMiNT, Synology =item Discontinued Platforms C<sfio>, AT&T 3b1, DG/UX, EBCDIC =item Platform-Specific Notes Cygwin, GNU/Hurd, Linux, Mac OS, MidnightBSD, Mixed-endian platforms, VMS, Win32, WinCE =back =item Internal Changes =item Selected Bug Fixes =over 4 =item Regular Expressions =item Perl 5 Debugger and -d =item Lexical Subroutines =item Everything Else =back =item Known Problems =item Obituary =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5184delta - what is new for perl v5.18.4 =over 4 =item DESCRIPTION =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Platform Support =over 4 =item Platform-Specific Notes Win32 =back =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5182delta - what is new for perl v5.18.2 =over 4 =item DESCRIPTION =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Documentation =over 4 =item Changes to Existing Documentation =back =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5181delta - what is new for perl v5.18.1 =over 4 =item DESCRIPTION =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Platform Support =over 4 =item Platform-Specific Notes AIX, MidnightBSD =back =item Selected Bug Fixes =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5180delta - what is new for perl v5.18.0 =over 4 =item DESCRIPTION =item Core Enhancements =over 4 =item New mechanism for experimental features =item Hash overhaul =item Upgrade to Unicode 6.2 =item Character name aliases may now include non-Latin1-range characters =item New DTrace probes =item C<${^LAST_FH}> =item Regular Expression Set Operations =item Lexical subroutines =item Computed Labels =item More CORE:: subs =item C<kill> with negative signal names =back =item Security =over 4 =item See also: hash overhaul =item C<Storable> security warning in documentation =item C<Locale::Maketext> allowed code injection via a malicious template =item Avoid calling memset with a negative count =back =item Incompatible Changes =over 4 =item See also: hash overhaul =item An unknown character name in C<\N{...}> is now a syntax error =item Formerly deprecated characters in C<\N{}> character name aliases are now errors. =item C<\N{BELL}> now refers to U+1F514 instead of U+0007 =item New Restrictions in Multi-Character Case-Insensitive Matching in Regular Expression Bracketed Character Classes =item Explicit rules for variable names and identifiers =item Vertical tabs are now whitespace =item C</(?{})/> and C</(??{})/> have been heavily reworked =item Stricter parsing of substitution replacement =item C<given> now aliases the global C<$_> =item The smartmatch family of features are now experimental =item Lexical C<$_> is now experimental =item readline() with C<$/ = \N> now reads N characters, not N bytes =item Overridden C<glob> is now passed one argument =item Here doc parsing =item Alphanumeric operators must now be separated from the closing delimiter of regular expressions =item qw(...) can no longer be used as parentheses =item Interaction of lexical and default warnings =item C<state sub> and C<our sub> =item Defined values stored in environment are forced to byte strings =item C<require> dies for unreadable files =item C<gv_fetchmeth_*> and SUPER =item C<split>'s first argument is more consistently interpreted =back =item Deprecations =over 4 =item Module removals L<encoding>, L<Archive::Extract>, L<B::Lint>, L<B::Lint::Debug>, L<CPANPLUS> and all included C<CPANPLUS::*> modules, L<Devel::InnerPackage>, L<Log::Message>, L<Log::Message::Config>, L<Log::Message::Handlers>, L<Log::Message::Item>, L<Log::Message::Simple>, L<Module::Pluggable>, L<Module::Pluggable::Object>, L<Object::Accessor>, L<Pod::LaTeX>, L<Term::UI>, L<Term::UI::History> =item Deprecated Utilities L<cpanp>, C<cpanp-run-perl>, L<cpan2dist>, L<pod2latex> =item PL_sv_objcount =item Five additional characters should be escaped in patterns with C</x> =item User-defined charnames with surprising whitespace =item Various XS-callable functions are now deprecated =item Certain rare uses of backslashes within regexes are now deprecated =item Splitting the tokens C<(?> and C<(*> in regular expressions =item Pre-PerlIO IO implementations =back =item Future Deprecations DG/UX, NeXT =item Performance Enhancements =item Modules and Pragmata =over 4 =item New Modules and Pragmata =item Updated Modules and Pragmata =item Removed Modules and Pragmata =back =item Documentation =over 4 =item Changes to Existing Documentation =item New Diagnostics =item Changes to Existing Diagnostics =back =item Utility Changes =item Configuration and Compilation =item Testing =item Platform Support =over 4 =item Discontinued Platforms BeOS, UTS Global, VM/ESA, MPE/IX, EPOC, Rhapsody =item Platform-Specific Notes =back =item Internal Changes =item Selected Bug Fixes =item Known Problems =item Obituary =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5163delta - what is new for perl v5.16.3 =over 4 =item DESCRIPTION =item Core Enhancements =item Security =over 4 =item CVE-2013-1667: memory exhaustion with arbitrary hash keys =item wrap-around with IO on long strings =item memory leak in Encode =back =item Incompatible Changes =item Deprecations =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Known Problems =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5162delta - what is new for perl v5.16.2 =over 4 =item DESCRIPTION =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Configuration and Compilation configuration should no longer be confused by ls colorization =item Platform Support =over 4 =item Platform-Specific Notes AIX =back =item Selected Bug Fixes fix /\h/ equivalence with /[\h]/ =item Known Problems =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5161delta - what is new for perl v5.16.1 =over 4 =item DESCRIPTION =item Security =over 4 =item an off-by-two error in Scalar-List-Util has been fixed =back =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules and Pragmata =back =item Configuration and Compilation =item Platform Support =over 4 =item Platform-Specific Notes VMS =back =item Selected Bug Fixes =item Known Problems =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5160delta - what is new for perl v5.16.0 =over 4 =item DESCRIPTION =item Notice =item Core Enhancements =over 4 =item C<use I<VERSION>> =item C<__SUB__> =item New and Improved Built-ins =item Unicode Support =item XS Changes =item Changes to Special Variables =item Debugger Changes =item The C<CORE> Namespace =item Other Changes =back =item Security =over 4 =item Use C<is_utf8_char_buf()> and not C<is_utf8_char()> =item Malformed UTF-8 input could cause attempts to read beyond the end of the buffer =item C<File::Glob::bsd_glob()> memory error with GLOB_ALTDIRFUNC (CVE-2011-2728). =item Privileges are now set correctly when assigning to C<$(> =back =item Deprecations =over 4 =item Don't read the Unicode data base files in F<lib/unicore> =item XS functions C<is_utf8_char()>, C<utf8_to_uvchr()> and C<utf8_to_uvuni()> =back =item Future Deprecations =over 4 =item Core Modules =item Platforms with no supporting programmers =item Other Future Deprecations =back =item Incompatible Changes =over 4 =item Special blocks called in void context =item The C<overloading> pragma and regexp objects =item Two XS typemap Entries removed =item Unicode 6.1 has incompatibilities with Unicode 6.0 =item Borland compiler =item Certain deprecated Unicode properties are no longer supported by default =item Dereferencing IO thingies as typeglobs =item User-defined case-changing operations =item XSUBs are now 'static' =item Weakening read-only references =item Tying scalars that hold typeglobs =item IPC::Open3 no longer provides C<xfork()>, C<xclose_on_exec()> and C<xpipe_anon()> =item C<$$> no longer caches PID =item C<$$> and C<getppid()> no longer emulate POSIX semantics under LinuxThreads =item C<< $< >>, C<< $> >>, C<$(> and C<$)> are no longer cached =item Which Non-ASCII characters get quoted by C<quotemeta> and C<\Q> has changed =back =item Performance Enhancements =item Modules and Pragmata =over 4 =item Deprecated Modules L<Version::Requirements> =item New Modules and Pragmata =item Updated Modules and Pragmata =item Removed Modules and Pragmata =back =item Documentation =over 4 =item New Documentation =item Changes to Existing Documentation =item Removed Documentation =back =item Diagnostics =over 4 =item New Diagnostics =item Removed Errors =item Changes to Existing Diagnostics =back =item Utility Changes =item Configuration and Compilation =item Platform Support =over 4 =item Platform-Specific Notes =back =item Internal Changes =item Selected Bug Fixes =over 4 =item Array and hash =item C API fixes =item Compile-time hints =item Copy-on-write scalars =item The debugger =item Dereferencing operators =item Filehandle, last-accessed =item Filetests and C<stat> =item Formats =item C<given> and C<when> =item The C<glob> operator =item Lvalue subroutines =item Overloading =item Prototypes of built-in keywords =item Regular expressions =item Smartmatching =item The C<sort> operator =item The C<substr> operator =item Support for embedded nulls =item Threading bugs =item Tied variables =item Version objects and vstrings =item Warnings, redefinition =item Warnings, "Uninitialized" =item Weak references =item Other notable fixes =back =item Known Problems =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5144delta - what is new for perl v5.14.4 =over 4 =item DESCRIPTION =item Core Enhancements =item Security =over 4 =item CVE-2013-1667: memory exhaustion with arbitrary hash keys =item memory leak in Encode =item [perl #111594] Socket::unpack_sockaddr_un heap-buffer-overflow =item [perl #111586] SDBM_File: fix off-by-one access to global ".dir" =item off-by-two error in List::Util =item [perl #115994] fix segv in regcomp.c:S_join_exact() =item [perl #115992] PL_eval_start use-after-free =item wrap-around with IO on long strings =back =item Incompatible Changes =item Deprecations =item Modules and Pragmata =over 4 =item New Modules and Pragmata =item Updated Modules and Pragmata Socket, SDBM_File, List::Util =item Removed Modules and Pragmata =back =item Documentation =over 4 =item New Documentation =item Changes to Existing Documentation =back =item Diagnostics =item Utility Changes =item Configuration and Compilation =item Platform Support =over 4 =item New Platforms =item Discontinued Platforms =item Platform-Specific Notes VMS =back =item Selected Bug Fixes =item Known Problems =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5143delta - what is new for perl v5.14.3 =over 4 =item DESCRIPTION =item Core Enhancements =item Security =over 4 =item C<Digest> unsafe use of eval (CVE-2011-3597) =item Heap buffer overrun in 'x' string repeat operator (CVE-2012-5195) =back =item Incompatible Changes =item Deprecations =item Modules and Pragmata =over 4 =item New Modules and Pragmata =item Updated Modules and Pragmata =item Removed Modules and Pragmata =back =item Documentation =over 4 =item New Documentation =item Changes to Existing Documentation =back =item Configuration and Compilation =item Platform Support =over 4 =item New Platforms =item Discontinued Platforms =item Platform-Specific Notes FreeBSD, Solaris and NetBSD, HP-UX, Linux, Mac OS X, GNU/Hurd, NetBSD =back =item Bug Fixes =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5142delta - what is new for perl v5.14.2 =over 4 =item DESCRIPTION =item Core Enhancements =item Security =over 4 =item C<File::Glob::bsd_glob()> memory error with GLOB_ALTDIRFUNC (CVE-2011-2728). =item C<Encode> decode_xs n-byte heap-overflow (CVE-2011-2939) =back =item Incompatible Changes =item Deprecations =item Modules and Pragmata =over 4 =item New Modules and Pragmata =item Updated Modules and Pragmata =item Removed Modules and Pragmata =back =item Platform Support =over 4 =item New Platforms =item Discontinued Platforms =item Platform-Specific Notes HP-UX PA-RISC/64 now supports gcc-4.x, Building on OS X 10.7 Lion and Xcode 4 works again =back =item Bug Fixes =item Known Problems =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5141delta - what is new for perl v5.14.1 =over 4 =item DESCRIPTION =item Core Enhancements =item Security =item Incompatible Changes =item Deprecations =item Modules and Pragmata =over 4 =item New Modules and Pragmata =item Updated Modules and Pragmata =item Removed Modules and Pragmata =back =item Documentation =over 4 =item New Documentation =item Changes to Existing Documentation =back =item Diagnostics =over 4 =item New Diagnostics =item Changes to Existing Diagnostics =back =item Utility Changes =item Configuration and Compilation =item Testing =item Platform Support =over 4 =item New Platforms =item Discontinued Platforms =item Platform-Specific Notes =back =item Internal Changes =item Bug Fixes =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5140delta - what is new for perl v5.14.0 =over 4 =item DESCRIPTION =item Notice =item Core Enhancements =over 4 =item Unicode =item Regular Expressions =item Syntactical Enhancements =item Exception Handling =item Other Enhancements C<-d:-foo>, C<-d:-foo=bar> =item New C APIs =back =item Security =over 4 =item User-defined regular expression properties =back =item Incompatible Changes =over 4 =item Regular Expressions and String Escapes =item Stashes and Package Variables =item Changes to Syntax or to Perl Operators =item Threads and Processes =item Configuration =back =item Deprecations =over 4 =item Omitting a space between a regular expression and subsequent word =item C<\cI<X>> =item C<"\b{"> and C<"\B{"> =item Perl 4-era .pl libraries =item List assignment to C<$[> =item Use of qw(...) as parentheses =item C<\N{BELL}> =item C<?PATTERN?> =item Tie functions on scalars holding typeglobs =item User-defined case-mapping =item Deprecated modules L<Devel::DProf> =back =item Performance Enhancements =over 4 =item "Safe signals" optimisation =item Optimisation of shift() and pop() calls without arguments =item Optimisation of regexp engine string comparison work =item Regular expression compilation speed-up =item String appending is 100 times faster =item Eliminate C<PL_*> accessor functions under ithreads =item Freeing weak references =item Lexical array and hash assignments =item C<@_> uses less memory =item Size optimisations to SV and HV structures =item Memory consumption improvements to Exporter =item Memory savings for weak references =item C<%+> and C<%-> use less memory =item Multiple small improvements to threads =item Adjacent pairs of nextstate opcodes are now optimized away =back =item Modules and Pragmata =over 4 =item New Modules and Pragmata =item Updated Modules and Pragma much less configuration dialog hassle, support for F<META/MYMETA.json>, support for L<local::lib>, support for L<HTTP::Tiny> to reduce the dependency on FTP sites, automatic mirror selection, iron out all known bugs in configure_requires, support for distributions compressed with L<bzip2(1)>, allow F<Foo/Bar.pm> on the command line to mean C<Foo::Bar>, charinfo(), charscript(), charblock() =item Removed Modules and Pragmata =back =item Documentation =over 4 =item New Documentation =item Changes to Existing Documentation =back =item Diagnostics =over 4 =item New Diagnostics Closure prototype called, Insecure user-defined property %s, panic: gp_free failed to free glob pointer - something is repeatedly re-creating entries, Parsing code internal error (%s), refcnt: fd %d%s, Regexp modifier "/%c" may not appear twice, Regexp modifiers "/%c" and "/%c" are mutually exclusive, Using !~ with %s doesn't make sense, "\b{" is deprecated; use "\b\{" instead, "\B{" is deprecated; use "\B\{" instead, Operation "%s" returns its argument for .., Use of qw(...) as parentheses is deprecated =item Changes to Existing Diagnostics =back =item Utility Changes =item Configuration and Compilation =item Platform Support =over 4 =item New Platforms AIX =item Discontinued Platforms Apollo DomainOS, MacOS Classic =item Platform-Specific Notes =back =item Internal Changes =over 4 =item New APIs =item C API Changes =item Deprecated C APIs C<Perl_ptr_table_clear>, C<sv_compile_2op>, C<find_rundefsvoffset>, C<CALL_FPTR> and C<CPERLscope> =item Other Internal Changes =back =item Selected Bug Fixes =over 4 =item I/O =item Regular Expression Bug Fixes =item Syntax/Parsing Bugs =item Stashes, Globs and Method Lookup Aliasing packages by assigning to globs [perl #77358], Deleting packages by deleting their containing stash elements, Undefining the glob containing a package (C<undef *Foo::>), Undefining an ISA glob (C<undef *Foo::ISA>), Deleting an ISA stash element (C<delete $Foo::{ISA}>), Sharing @ISA arrays between classes (via C<*Foo::ISA = \@Bar::ISA> or C<*Foo::ISA = *Bar::ISA>) [perl #77238] =item Unicode =item Ties, Overloading and Other Magic =item The Debugger =item Threads =item Scoping and Subroutines =item Signals =item Miscellaneous Memory Leaks =item Memory Corruption and Crashes =item Fixes to Various Perl Operators =item Bugs Relating to the C API =back =item Known Problems =item Errata =over 4 =item keys(), values(), and each() work on arrays =item split() and C<@_> =back =item Obituary =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5125delta - what is new for perl v5.12.5 =over 4 =item DESCRIPTION =item Security =over 4 =item C<Encode> decode_xs n-byte heap-overflow (CVE-2011-2939) =item C<File::Glob::bsd_glob()> memory error with GLOB_ALTDIRFUNC (CVE-2011-2728). =item Heap buffer overrun in 'x' string repeat operator (CVE-2012-5195) =back =item Incompatible Changes =item Modules and Pragmata =over 4 =item Updated Modules =back =item Changes to Existing Documentation =over 4 =item L<perlebcdic> =item L<perlunicode> =item L<perluniprops> =back =item Installation and Configuration Improvements =over 4 =item Platform Specific Changes Mac OS X, NetBSD =back =item Selected Bug Fixes =item Errata =over 4 =item split() and C<@_> =back =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5124delta - what is new for perl v5.12.4 =over 4 =item DESCRIPTION =item Incompatible Changes =item Selected Bug Fixes =item Modules and Pragmata =item Testing =item Documentation =item Platform Specific Notes Linux =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5123delta - what is new for perl v5.12.3 =over 4 =item DESCRIPTION =item Incompatible Changes =item Core Enhancements =over 4 =item C<keys>, C<values> work on arrays =back =item Bug Fixes =item Platform Specific Notes Solaris, VMS, VOS =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5122delta - what is new for perl v5.12.2 =over 4 =item DESCRIPTION =item Incompatible Changes =item Core Enhancements =item Modules and Pragmata =over 4 =item New Modules and Pragmata =item Pragmata Changes =item Updated Modules C<Carp>, C<CPANPLUS>, C<File::Glob>, C<File::Copy>, C<File::Spec> =back =item Utility Changes =item Changes to Existing Documentation =item Installation and Configuration Improvements =over 4 =item Configuration improvements =item Compilation improvements =back =item Selected Bug Fixes =item Platform Specific Notes =over 4 =item AIX =item Windows =item VMS =back =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5121delta - what is new for perl v5.12.1 =over 4 =item DESCRIPTION =item Incompatible Changes =item Core Enhancements =item Modules and Pragmata =over 4 =item Pragmata Changes =item Updated Modules =back =item Changes to Existing Documentation =item Testing =over 4 =item Testing Improvements =back =item Installation and Configuration Improvements =over 4 =item Configuration improvements =back =item Bug Fixes =item Platform Specific Notes =over 4 =item HP-UX =item AIX =item FreeBSD 7 =item VMS =back =item Known Problems =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5120delta - what is new for perl v5.12.0 =over 4 =item DESCRIPTION =item Core Enhancements =over 4 =item New C<package NAME VERSION> syntax =item The C<...> operator =item Implicit strictures =item Unicode improvements =item Y2038 compliance =item qr overloading =item Pluggable keywords =item APIs for more internals =item Overridable function lookup =item A proper interface for pluggable Method Resolution Orders =item C<\N> experimental regex escape =item DTrace support =item Support for C<configure_requires> in CPAN module metadata =item C<each>, C<keys>, C<values> are now more flexible =item C<when> as a statement modifier =item C<$,> flexibility =item // in when clauses =item Enabling warnings from your shell environment =item C<delete local> =item New support for Abstract namespace sockets =item 32-bit limit on substr arguments removed =back =item Potentially Incompatible Changes =over 4 =item Deprecations warn by default =item Version number formats =item @INC reorganization =item REGEXPs are now first class =item Switch statement changes flip-flop operators, defined-or operator =item Smart match changes =item Other potentially incompatible changes =back =item Deprecations suidperl, Use of C<:=> to mean an empty attribute list, C<< UNIVERSAL->import() >>, Use of "goto" to jump into a construct, Custom character names in \N{name} that don't look like names, Deprecated Modules, L<Class::ISA>, L<Pod::Plainer>, L<Shell>, L<Switch>, Assignment to $[, Use of the attribute :locked on subroutines, Use of "locked" with the attributes pragma, Use of "unique" with the attributes pragma, Perl_pmflag, Numerous Perl 4-era libraries =item Unicode overhaul =item Modules and Pragmata =over 4 =item New Modules and Pragmata C<autodie>, C<Compress::Raw::Bzip2>, C<overloading>, C<parent>, C<Parse::CPAN::Meta>, C<VMS::DCLsym>, C<VMS::Stdio>, C<XS::APItest::KeywordRPN> =item Updated Pragmata C<base>, C<bignum>, C<charnames>, C<constant>, C<diagnostics>, C<feature>, C<less>, C<lib>, C<mro>, C<overload>, C<threads>, C<threads::shared>, C<version>, C<warnings> =item Updated Modules C<Archive::Extract>, C<Archive::Tar>, C<Attribute::Handlers>, C<AutoLoader>, C<B::Concise>, C<B::Debug>, C<B::Deparse>, C<B::Lint>, C<CGI>, C<Class::ISA>, C<Compress::Raw::Zlib>, C<CPAN>, C<CPANPLUS>, C<CPANPLUS::Dist::Build>, C<Data::Dumper>, C<DB_File>, C<Devel::PPPort>, C<Digest>, C<Digest::MD5>, C<Digest::SHA>, C<Encode>, C<Exporter>, C<ExtUtils::CBuilder>, C<ExtUtils::Command>, C<ExtUtils::Constant>, C<ExtUtils::Install>, C<ExtUtils::MakeMaker>, C<ExtUtils::Manifest>, C<ExtUtils::ParseXS>, C<File::Fetch>, C<File::Path>, C<File::Temp>, C<Filter::Simple>, C<Filter::Util::Call>, C<Getopt::Long>, C<IO>, C<IO::Zlib>, C<IPC::Cmd>, C<IPC::SysV>, C<Locale::Maketext>, C<Locale::Maketext::Simple>, C<Log::Message>, C<Log::Message::Simple>, C<Math::BigInt>, C<Math::BigInt::FastCalc>, C<Math::BigRat>, C<Math::Complex>, C<Memoize>, C<MIME::Base64>, C<Module::Build>, C<Module::CoreList>, C<Module::Load>, C<Module::Load::Conditional>, C<Module::Loaded>, C<Module::Pluggable>, C<Net::Ping>, C<NEXT>, C<Object::Accessor>, C<Package::Constants>, C<PerlIO>, C<Pod::Parser>, C<Pod::Perldoc>, C<Pod::Plainer>, C<Pod::Simple>, C<Safe>, C<SelfLoader>, C<Storable>, C<Switch>, C<Sys::Syslog>, C<Term::ANSIColor>, C<Term::UI>, C<Test>, C<Test::Harness>, C<Test::Simple>, C<Text::Balanced>, C<Text::ParseWords>, C<Text::Soundex>, C<Thread::Queue>, C<Thread::Semaphore>, C<Tie::RefHash>, C<Time::HiRes>, C<Time::Local>, C<Time::Piece>, C<Unicode::Collate>, C<Unicode::Normalize>, C<Win32>, C<Win32API::File>, C<XSLoader> =item Removed Modules and Pragmata C<attrs>, C<CPAN::API::HOWTO>, C<CPAN::DeferedCode>, C<CPANPLUS::inc>, C<DCLsym>, C<ExtUtils::MakeMaker::bytes>, C<ExtUtils::MakeMaker::vmsish>, C<Stdio>, C<Test::Harness::Assert>, C<Test::Harness::Iterator>, C<Test::Harness::Point>, C<Test::Harness::Results>, C<Test::Harness::Straps>, C<Test::Harness::Util>, C<XSSymSet> =item Deprecated Modules and Pragmata =back =item Documentation =over 4 =item New Documentation =item Changes to Existing Documentation =back =item Selected Performance Enhancements =item Installation and Configuration Improvements =item Internal Changes =item Testing =over 4 =item Testing improvements Parallel tests, Test harness flexibility, Test watchdog =item New Tests =back =item New or Changed Diagnostics =over 4 =item New Diagnostics =item Changed Diagnostics C<Illegal character in prototype for %s : %s>, C<Prototype after '%c' for %s : %s> =back =item Utility Changes =item Selected Bug Fixes =item Platform Specific Changes =over 4 =item New Platforms Haiku, MirOS BSD =item Discontinued Platforms Domain/OS, MiNT, Tenon MachTen =item Updated Platforms AIX, Cygwin, Darwin (Mac OS X), DragonFly BSD, FreeBSD, Irix, NetBSD, OpenVMS, Stratus VOS, Symbian, Windows =back =item Known Problems =item Errata =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5101delta - what is new for perl v5.10.1 =over 4 =item DESCRIPTION =item Incompatible Changes =over 4 =item Switch statement changes flip-flop operators, defined-or operator =item Smart match changes =item Other incompatible changes =back =item Core Enhancements =over 4 =item Unicode Character Database 5.1.0 =item A proper interface for pluggable Method Resolution Orders =item The C<overloading> pragma =item Parallel tests =item DTrace support =item Support for C<configure_requires> in CPAN module metadata =back =item Modules and Pragmata =over 4 =item New Modules and Pragmata C<autodie>, C<Compress::Raw::Bzip2>, C<parent>, C<Parse::CPAN::Meta> =item Pragmata Changes C<attributes>, C<attrs>, C<base>, C<bigint>, C<bignum>, C<bigrat>, C<charnames>, C<constant>, C<feature>, C<fields>, C<lib>, C<open>, C<overload>, C<overloading>, C<version> =item Updated Modules C<Archive::Extract>, C<Archive::Tar>, C<Attribute::Handlers>, C<AutoLoader>, C<AutoSplit>, C<B>, C<B::Debug>, C<B::Deparse>, C<B::Lint>, C<B::Xref>, C<Benchmark>, C<Carp>, C<CGI>, C<Compress::Zlib>, C<CPAN>, C<CPANPLUS>, C<CPANPLUS::Dist::Build>, C<Cwd>, C<Data::Dumper>, C<DB>, C<DB_File>, C<Devel::PPPort>, C<Digest::MD5>, C<Digest::SHA>, C<DirHandle>, C<Dumpvalue>, C<DynaLoader>, C<Encode>, C<Errno>, C<Exporter>, C<ExtUtils::CBuilder>, C<ExtUtils::Command>, C<ExtUtils::Constant>, C<ExtUtils::Embed>, C<ExtUtils::Install>, C<ExtUtils::MakeMaker>, C<ExtUtils::Manifest>, C<ExtUtils::ParseXS>, C<Fatal>, C<File::Basename>, C<File::Compare>, C<File::Copy>, C<File::Fetch>, C<File::Find>, C<File::Path>, C<File::Spec>, C<File::stat>, C<File::Temp>, C<FileCache>, C<FileHandle>, C<Filter::Simple>, C<Filter::Util::Call>, C<FindBin>, C<GDBM_File>, C<Getopt::Long>, C<Hash::Util::FieldHash>, C<I18N::Collate>, C<IO>, C<IO::Compress::*>, C<IO::Dir>, C<IO::Handle>, C<IO::Socket>, C<IO::Zlib>, C<IPC::Cmd>, C<IPC::Open3>, C<IPC::SysV>, C<lib>, C<List::Util>, C<Locale::MakeText>, C<Log::Message>, C<Math::BigFloat>, C<Math::BigInt>, C<Math::BigInt::FastCalc>, C<Math::BigRat>, C<Math::Complex>, C<Math::Trig>, C<Memoize>, C<Module::Build>, C<Module::CoreList>, C<Module::Load>, C<Module::Load::Conditional>, C<Module::Loaded>, C<Module::Pluggable>, C<NDBM_File>, C<Net::Ping>, C<NEXT>, C<Object::Accessor>, C<OS2::REXX>, C<Package::Constants>, C<PerlIO>, C<PerlIO::via>, C<Pod::Man>, C<Pod::Parser>, C<Pod::Simple>, C<Pod::Text>, C<POSIX>, C<Safe>, C<Scalar::Util>, C<SelectSaver>, C<SelfLoader>, C<Socket>, C<Storable>, C<Switch>, C<Symbol>, C<Sys::Syslog>, C<Term::ANSIColor>, C<Term::ReadLine>, C<Term::UI>, C<Test::Harness>, C<Test::Simple>, C<Text::ParseWords>, C<Text::Tabs>, C<Text::Wrap>, C<Thread::Queue>, C<Thread::Semaphore>, C<threads>, C<threads::shared>, C<Tie::RefHash>, C<Tie::StdHandle>, C<Time::HiRes>, C<Time::Local>, C<Time::Piece>, C<Unicode::Normalize>, C<Unicode::UCD>, C<UNIVERSAL>, C<Win32>, C<Win32API::File>, C<XSLoader> =back =item Utility Changes F<h2ph>, F<h2xs>, F<perl5db.pl>, F<perlthanks> =item New Documentation L<perlhaiku>, L<perlmroapi>, L<perlperf>, L<perlrepository>, L<perlthanks> =item Changes to Existing Documentation =item Performance Enhancements =item Installation and Configuration Improvements =over 4 =item F<ext/> reorganisation =item Configuration improvements =item Compilation improvements =item Platform Specific Changes AIX, Cygwin, FreeBSD, Irix, Haiku, MirOS BSD, NetBSD, Stratus VOS, Symbian, Win32, VMS =back =item Selected Bug Fixes =item New or Changed Diagnostics C<panic: sv_chop %s>, C<Can't locate package %s for the parents of %s>, C<v-string in use/require is non-portable>, C<Deep recursion on subroutine "%s"> =item Changed Internals C<SVf_UTF8>, C<SVs_TEMP> =item New Tests t/comp/retainedlines.t, t/io/perlio_fail.t, t/io/perlio_leaks.t, t/io/perlio_open.t, t/io/perlio.t, t/io/pvbm.t, t/mro/package_aliases.t, t/op/dbm.t, t/op/index_thr.t, t/op/pat_thr.t, t/op/qr_gc.t, t/op/reg_email_thr.t, t/op/regexp_qr_embed_thr.t, t/op/regexp_unicode_prop.t, t/op/regexp_unicode_prop_thr.t, t/op/reg_nc_tie.t, t/op/reg_posixcc.t, t/op/re.t, t/op/setpgrpstack.t, t/op/substr_thr.t, t/op/upgrade.t, t/uni/lex_utf8.t, t/uni/tie.t =item Known Problems =item Deprecations =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl5100delta - what is new for perl 5.10.0 =over 4 =item DESCRIPTION =item Core Enhancements =over 4 =item The C<feature> pragma =item New B<-E> command-line switch =item Defined-or operator =item Switch and Smart Match operator =item Regular expressions Recursive Patterns, Named Capture Buffers, Possessive Quantifiers, Backtracking control verbs, Relative backreferences, C<\K> escape, Vertical and horizontal whitespace, and linebreak, Optional pre-match and post-match captures with the /p flag =item C<say()> =item Lexical C<$_> =item The C<_> prototype =item UNITCHECK blocks =item New Pragma, C<mro> =item readdir() may return a "short filename" on Windows =item readpipe() is now overridable =item Default argument for readline() =item state() variables =item Stacked filetest operators =item UNIVERSAL::DOES() =item Formats =item Byte-order modifiers for pack() and unpack() =item C<no VERSION> =item C<chdir>, C<chmod> and C<chown> on filehandles =item OS groups =item Recursive sort subs =item Exceptions in constant folding =item Source filters in @INC =item New internal variables C<${^RE_DEBUG_FLAGS}>, C<${^CHILD_ERROR_NATIVE}>, C<${^RE_TRIE_MAXBUF}>, C<${^WIN32_SLOPPY_STAT}> =item Miscellaneous =item UCD 5.0.0 =item MAD =item kill() on Windows =back =item Incompatible Changes =over 4 =item Packing and UTF-8 strings =item Byte/character count feature in unpack() =item The C<$*> and C<$#> variables have been removed =item substr() lvalues are no longer fixed-length =item Parsing of C<-f _> =item C<:unique> =item Effect of pragmas in eval =item chdir FOO =item Handling of .pmc files =item $^V is now a C<version> object instead of a v-string =item @- and @+ in patterns =item $AUTOLOAD can now be tainted =item Tainting and printf =item undef and signal handlers =item strictures and dereferencing in defined() =item C<(?p{})> has been removed =item Pseudo-hashes have been removed =item Removal of the bytecode compiler and of perlcc =item Removal of the JPL =item Recursive inheritance detected earlier =item warnings::enabled and warnings::warnif changed to favor users of modules =back =item Modules and Pragmata =over 4 =item Upgrading individual core modules =item Pragmata Changes C<feature>, C<mro>, Scoping of the C<sort> pragma, Scoping of C<bignum>, C<bigint>, C<bigrat>, C<base>, C<strict> and C<warnings>, C<version>, C<warnings>, C<less> =item New modules =item Selected Changes to Core Modules C<Attribute::Handlers>, C<B::Lint>, C<B>, C<Thread> =back =item Utility Changes perl -d, ptar, ptardiff, shasum, corelist, h2ph and h2xs, perlivp, find2perl, config_data, cpanp, cpan2dist, pod2html =item New Documentation =item Performance Enhancements =over 4 =item In-place sorting =item Lexical array access =item XS-assisted SWASHGET =item Constant subroutines =item C<PERL_DONT_CREATE_GVSV> =item Weak references are cheaper =item sort() enhancements =item Memory optimisations =item UTF-8 cache optimisation =item Sloppy stat on Windows =item Regular expressions optimisations Engine de-recursivised, Single char char-classes treated as literals, Trie optimisation of literal string alternations, Aho-Corasick start-point optimisation =back =item Installation and Configuration Improvements =over 4 =item Configuration improvements C<-Dusesitecustomize>, Relocatable installations, strlcat() and strlcpy(), C<d_pseudofork> and C<d_printf_format_null>, Configure help =item Compilation improvements Parallel build, Borland's compilers support, Static build on Windows, ppport.h files, C++ compatibility, Support for Microsoft 64-bit compiler, Visual C++, Win32 builds =item Installation improvements Module auxiliary files =item New Or Improved Platforms =back =item Selected Bug Fixes strictures in regexp-eval blocks, Calling CORE::require(), Subscripts of slices, C<no warnings 'category'> works correctly with -w, threads improvements, chr() and negative values, PERL5SHELL and tainting, Using *FILE{IO}, Overloading and reblessing, Overloading and UTF-8, eval memory leaks fixed, Random device on Windows, PERLIO_DEBUG, PerlIO::scalar and read-only scalars, study() and UTF-8, Critical signals, @INC-hook fix, C<-t> switch fix, Duping UTF-8 filehandles, Localisation of hash elements =item New or Changed Diagnostics Use of uninitialized value, Deprecated use of my() in false conditional, !=~ should be !~, Newline in left-justified string, Too late for "-T" option, "%s" variable %s masks earlier declaration, readdir()/closedir()/etc. attempted on invalid dirhandle, Opening dirhandle/filehandle %s also as a file/directory, Use of -P is deprecated, v-string in use/require is non-portable, perl -V =item Changed Internals =over 4 =item Reordering of SVt_* constants =item Elimination of SVt_PVBM =item New type SVt_BIND =item Removal of CPP symbols =item Less space is used by ops =item New parser =item Use of C<const> =item Mathoms =item C<AvFLAGS> has been removed =item C<av_*> changes =item $^H and %^H =item B:: modules inheritance changed =item Anonymous hash and array constructors =back =item Known Problems =over 4 =item UTF-8 problems =back =item Platform Specific Problems =item Reporting Bugs =item SEE ALSO =back =head2 perl589delta - what is new for perl v5.8.9 =over 4 =item DESCRIPTION =item Notice =item Incompatible Changes =item Core Enhancements =over 4 =item Unicode Character Database 5.1.0. =item stat and -X on directory handles =item Source filters in @INC =item Exceptions in constant folding =item C<no VERSION> =item Improved internal UTF-8 caching code =item Runtime relocatable installations =item New internal variables C<${^CHILD_ERROR_NATIVE}>, C<${^UTF8CACHE}> =item C<readpipe> is now overridable =item simple exception handling macros =item -D option enhancements =item XS-assisted SWASHGET =item Constant subroutines =back =item New Platforms =item Modules and Pragmata =over 4 =item New Modules =item Updated Modules =back =item Utility Changes =over 4 =item debugger upgraded to version 1.31 =item F<perlthanks> =item F<perlbug> =item F<h2xs> =item F<h2ph> =back =item New Documentation =item Changes to Existing Documentation =item Performance Enhancements =item Installation and Configuration Improvements =over 4 =item Relocatable installations =item Configuration improvements =item Compilation improvements =item Installation improvements. =item Platform Specific Changes =back =item Selected Bug Fixes =over 4 =item Unicode =item PerlIO =item Magic =item Reblessing overloaded objects now works =item C<strict> now propagates correctly into string evals =item Other fixes =item Platform Specific Fixes =item Smaller fixes =back =item New or Changed Diagnostics =over 4 =item panic: sv_chop %s =item Maximal count of pending signals (%s) exceeded =item panic: attempt to call %s in %s =item FETCHSIZE returned a negative value =item Can't upgrade %s (%d) to %d =item %s argument is not a HASH or ARRAY element or a subroutine =item Cannot make the non-overridable builtin %s fatal =item Unrecognized character '%s' in column %d =item Offset outside string =item Invalid escape in the specified encoding in regexp; marked by <-- HERE in m/%s/ =item Your machine doesn't support dump/undump. =back =item Changed Internals =over 4 =item Macro cleanups =back =item New Tests ext/DynaLoader/t/DynaLoader.t, t/comp/fold.t, t/io/pvbm.t, t/lib/proxy_constant_subs.t, t/op/attrhand.t, t/op/dbm.t, t/op/inccode-tie.t, t/op/incfilter.t, t/op/kill0.t, t/op/qrstack.t, t/op/qr.t, t/op/regexp_qr_embed.t, t/op/regexp_qr.t, t/op/rxcode.t, t/op/studytied.t, t/op/substT.t, t/op/symbolcache.t, t/op/upgrade.t, t/mro/package_aliases.t, t/pod/twice.t, t/run/cloexec.t, t/uni/cache.t, t/uni/chr.t, t/uni/greek.t, t/uni/latin2.t, t/uni/overload.t, t/uni/tie.t =item Known Problems =item Platform Specific Notes =over 4 =item Win32 =item OS/2 =item VMS =back =item Obituary =item Acknowledgements =item Reporting Bugs =item SEE ALSO =back =head2 perl588delta - what is new for perl v5.8.8 =over 4 =item DESCRIPTION =item Incompatible Changes =item Core Enhancements =item Modules and Pragmata =item Utility Changes =over 4 =item C<h2xs> enhancements =item C<perlivp> enhancements =back =item New Documentation =item Performance Enhancements =item Installation and Configuration Improvements =item Selected Bug Fixes =over 4 =item no warnings 'category' works correctly with -w =item Remove over-optimisation =item sprintf() fixes =item Debugger and Unicode slowdown =item Smaller fixes =back =item New or Changed Diagnostics =over 4 =item Attempt to set length of freed array =item Non-string passed as bitmask =item Search pattern not terminated or ternary operator parsed as search pattern =back =item Changed Internals =item Platform Specific Problems =item Reporting Bugs =item SEE ALSO =back =head2 perl587delta - what is new for perl v5.8.7 =over 4 =item DESCRIPTION =item Incompatible Changes =item Core Enhancements =over 4 =item Unicode Character Database 4.1.0 =item suidperl less insecure =item Optional site customization script =item C<Config.pm> is now much smaller. =back =item Modules and Pragmata =item Utility Changes =over 4 =item find2perl enhancements =back =item Performance Enhancements =item Installation and Configuration Improvements =item Selected Bug Fixes =item New or Changed Diagnostics =item Changed Internals =item Known Problems =item Platform Specific Problems =item Reporting Bugs =item SEE ALSO =back =head2 perl586delta - what is new for perl v5.8.6 =over 4 =item DESCRIPTION =item Incompatible Changes =item Core Enhancements =item Modules and Pragmata =item Utility Changes =item Performance Enhancements =item Selected Bug Fixes =item New or Changed Diagnostics =item Changed Internals =item New Tests =item Reporting Bugs =item SEE ALSO =back =head2 perl585delta - what is new for perl v5.8.5 =over 4 =item DESCRIPTION =item Incompatible Changes =item Core Enhancements =item Modules and Pragmata =item Utility Changes =over 4 =item Perl's debugger =item h2ph =back =item Installation and Configuration Improvements =item Selected Bug Fixes =item New or Changed Diagnostics =item Changed Internals =item Known Problems =item Platform Specific Problems =item Reporting Bugs =item SEE ALSO =back =head2 perl584delta - what is new for perl v5.8.4 =over 4 =item DESCRIPTION =item Incompatible Changes =item Core Enhancements =over 4 =item Malloc wrapping =item Unicode Character Database 4.0.1 =item suidperl less insecure =item format =back =item Modules and Pragmata =over 4 =item Updated modules Attribute::Handlers, B, Benchmark, CGI, Carp, Cwd, Exporter, File::Find, IO, IPC::Open3, Local::Maketext, Math::BigFloat, Math::BigInt, Math::BigRat, MIME::Base64, ODBM_File, POSIX, Shell, Socket, Storable, Switch, Sys::Syslog, Term::ANSIColor, Time::HiRes, Unicode::UCD, Win32, base, open, threads, utf8 =back =item Performance Enhancements =item Utility Changes =item Installation and Configuration Improvements =item Selected Bug Fixes =item New or Changed Diagnostics =item Changed Internals =item Future Directions =item Platform Specific Problems =item Reporting Bugs =item SEE ALSO =back =head2 perl583delta - what is new for perl v5.8.3 =over 4 =item DESCRIPTION =item Incompatible Changes =item Core Enhancements =item Modules and Pragmata CGI, Cwd, Digest, Digest::MD5, Encode, File::Spec, FindBin, List::Util, Math::BigInt, PodParser, Pod::Perldoc, POSIX, Unicode::Collate, Unicode::Normalize, Test::Harness, threads::shared =item Utility Changes =item New Documentation =item Installation and Configuration Improvements =item Selected Bug Fixes =item New or Changed Diagnostics =item Changed Internals =item Configuration and Building =item Platform Specific Problems =item Known Problems =item Future Directions =item Obituary =item Reporting Bugs =item SEE ALSO =back =head2 perl582delta - what is new for perl v5.8.2 =over 4 =item DESCRIPTION =item Incompatible Changes =item Core Enhancements =over 4 =item Hash Randomisation =item Threading =back =item Modules and Pragmata =over 4 =item Updated Modules And Pragmata Devel::PPPort, Digest::MD5, I18N::LangTags, libnet, MIME::Base64, Pod::Perldoc, strict, Tie::Hash, Time::HiRes, Unicode::Collate, Unicode::Normalize, UNIVERSAL =back =item Selected Bug Fixes =item Changed Internals =item Platform Specific Problems =item Future Directions =item Reporting Bugs =item SEE ALSO =back =head2 perl581delta - what is new for perl v5.8.1 =over 4 =item DESCRIPTION =item Incompatible Changes =over 4 =item Hash Randomisation =item UTF-8 On Filehandles No Longer Activated By Locale =item Single-number v-strings are no longer v-strings before "=>" =item (Win32) The -C Switch Has Been Repurposed =item (Win32) The /d Switch Of cmd.exe =back =item Core Enhancements =over 4 =item UTF-8 no longer default under UTF-8 locales =item Unsafe signals again available =item Tied Arrays with Negative Array Indices =item local ${$x} =item Unicode Character Database 4.0.0 =item Deprecation Warnings =item Miscellaneous Enhancements =back =item Modules and Pragmata =over 4 =item Updated Modules And Pragmata base, B::Bytecode, B::Concise, B::Deparse, Benchmark, ByteLoader, bytes, CGI, charnames, CPAN, Data::Dumper, DB_File, Devel::PPPort, Digest::MD5, Encode, fields, libnet, Math::BigInt, MIME::Base64, NEXT, Net::Ping, PerlIO::scalar, podlators, Pod::LaTeX, PodParsers, Pod::Perldoc, Scalar::Util, Storable, strict, Term::ANSIcolor, Test::Harness, Test::More, Test::Simple, Text::Balanced, Time::HiRes, threads, threads::shared, Unicode::Collate, Unicode::Normalize, Win32::GetFolderPath, Win32::GetOSVersion =back =item Utility Changes =item New Documentation =item Installation and Configuration Improvements =over 4 =item Platform-specific enhancements =back =item Selected Bug Fixes =over 4 =item Closures, eval and lexicals =item Generic fixes =item Platform-specific fixes =back =item New or Changed Diagnostics =over 4 =item Changed "A thread exited while %d threads were running" =item Removed "Attempt to clear a restricted hash" =item New "Illegal declaration of anonymous subroutine" =item Changed "Invalid range "%s" in transliteration operator" =item New "Missing control char name in \c" =item New "Newline in left-justified string for %s" =item New "Possible precedence problem on bitwise %c operator" =item New "Pseudo-hashes are deprecated" =item New "read() on %s filehandle %s" =item New "5.005 threads are deprecated" =item New "Tied variable freed while still in use" =item New "To%s: illegal mapping '%s'" =item New "Use of freed value in iteration" =back =item Changed Internals =item New Tests =item Known Problems =over 4 =item Tied hashes in scalar context =item Net::Ping 450_service and 510_ping_udp failures =item B::C =back =item Platform Specific Problems =over 4 =item EBCDIC Platforms =item Cygwin 1.5 problems =item HP-UX: HP cc warnings about sendfile and sendpath =item IRIX: t/uni/tr_7jis.t falsely failing =item Mac OS X: no usemymalloc =item Tru64: No threaded builds with GNU cc (gcc) =item Win32: sysopen, sysread, syswrite =back =item Future Directions =item Reporting Bugs =item SEE ALSO =back =head2 perl58delta - what is new for perl v5.8.0 =over 4 =item DESCRIPTION =item Highlights In 5.8.0 =item Incompatible Changes =over 4 =item Binary Incompatibility =item 64-bit platforms and malloc =item AIX Dynaloading =item Attributes for C<my> variables now handled at run-time =item Socket Extension Dynamic in VMS =item IEEE-format Floating Point Default on OpenVMS Alpha =item New Unicode Semantics (no more C<use utf8>, almost) =item New Unicode Properties =item REF(...) Instead Of SCALAR(...) =item pack/unpack D/F recycled =item glob() now returns filenames in alphabetical order =item Deprecations =back =item Core Enhancements =over 4 =item Unicode Overhaul =item PerlIO is Now The Default =item ithreads =item Restricted Hashes =item Safe Signals =item Understanding of Numbers =item Arrays now always interpolate into double-quoted strings [561] =item Miscellaneous Changes =back =item Modules and Pragmata =over 4 =item New Modules and Pragmata =item Updated And Improved Modules and Pragmata =back =item Utility Changes =item New Documentation =item Performance Enhancements =item Installation and Configuration Improvements =over 4 =item Generic Improvements =item New Or Improved Platforms =back =item Selected Bug Fixes =over 4 =item Platform Specific Changes and Fixes =back =item New or Changed Diagnostics =item Changed Internals =item Security Vulnerability Closed [561] =item New Tests =item Known Problems =over 4 =item The Compiler Suite Is Still Very Experimental =item Localising Tied Arrays and Hashes Is Broken =item Building Extensions Can Fail Because Of Largefiles =item Modifying $_ Inside for(..) =item mod_perl 1.26 Doesn't Build With Threaded Perl =item lib/ftmp-security tests warn 'system possibly insecure' =item libwww-perl (LWP) fails base/date #51 =item PDL failing some tests =item Perl_get_sv =item Self-tying Problems =item ext/threads/t/libc =item Failure of Thread (5.005-style) tests =item Timing problems =item Tied/Magical Array/Hash Elements Do Not Autovivify =item Unicode in package/class and subroutine names does not work =back =item Platform Specific Problems =over 4 =item AIX =item Alpha systems with old gccs fail several tests =item AmigaOS =item BeOS =item Cygwin "unable to remap" =item Cygwin ndbm tests fail on FAT =item DJGPP Failures =item FreeBSD built with ithreads coredumps reading large directories =item FreeBSD Failing locale Test 117 For ISO 8859-15 Locales =item IRIX fails ext/List/Util/t/shuffle.t or Digest::MD5 =item HP-UX lib/posix Subtest 9 Fails When LP64-Configured =item Linux with glibc 2.2.5 fails t/op/int subtest #6 with -Duse64bitint =item Linux With Sfio Fails op/misc Test 48 =item Mac OS X =item Mac OS X dyld undefined symbols =item OS/2 Test Failures =item op/sprintf tests 91, 129, and 130 =item SCO =item Solaris 2.5 =item Solaris x86 Fails Tests With -Duse64bitint =item SUPER-UX (NEC SX) =item Term::ReadKey not working on Win32 =item UNICOS/mk =item UTS =item VOS (Stratus) =item VMS =item Win32 =item XML::Parser not working =item z/OS (OS/390) =item Unicode Support on EBCDIC Still Spotty =item Seen In Perl 5.7 But Gone Now =back =item Reporting Bugs =item SEE ALSO =item HISTORY =back =head2 perl561delta - what's new for perl v5.6.1 =over 4 =item DESCRIPTION =item Summary of changes between 5.6.0 and 5.6.1 =over 4 =item Security Issues =item Core bug fixes C<UNIVERSAL::isa()>, Memory leaks, Numeric conversions, qw(a\\b), caller(), Bugs in regular expressions, "slurp" mode, Autovivification of symbolic references to special variables, Lexical warnings, Spurious warnings and errors, glob(), Tainting, sort(), #line directives, Subroutine prototypes, map(), Debugger, PERL5OPT, chop(), Unicode support, 64-bit support, Compiler, Lvalue subroutines, IO::Socket, File::Find, xsubpp, C<no Module;>, Tests =item Core features =item Configuration issues =item Documentation =item Bundled modules B::Concise, File::Temp, Pod::LaTeX, Pod::Text::Overstrike, CGI, CPAN, Class::Struct, DB_File, Devel::Peek, File::Find, Getopt::Long, IO::Poll, IPC::Open3, Math::BigFloat, Math::Complex, Net::Ping, Opcode, Pod::Parser, Pod::Text, SDBM_File, Sys::Syslog, Tie::RefHash, Tie::SubstrHash =item Platform-specific improvements NCR MP-RAS, NonStop-UX =back =item Core Enhancements =over 4 =item Interpreter cloning, threads, and concurrency =item Lexically scoped warning categories =item Unicode and UTF-8 support =item Support for interpolating named characters =item "our" declarations =item Support for strings represented as a vector of ordinals =item Improved Perl version numbering system =item New syntax for declaring subroutine attributes =item File and directory handles can be autovivified =item open() with more than two arguments =item 64-bit support =item Large file support =item Long doubles =item "more bits" =item Enhanced support for sort() subroutines =item C<sort $coderef @foo> allowed =item File globbing implemented internally =item Support for CHECK blocks =item POSIX character class syntax [: :] supported =item Better pseudo-random number generator =item Improved C<qw//> operator =item Better worst-case behavior of hashes =item pack() format 'Z' supported =item pack() format modifier '!' supported =item pack() and unpack() support counted strings =item Comments in pack() templates =item Weak references =item Binary numbers supported =item Lvalue subroutines =item Some arrows may be omitted in calls through references =item Boolean assignment operators are legal lvalues =item exists() is supported on subroutine names =item exists() and delete() are supported on array elements =item Pseudo-hashes work better =item Automatic flushing of output buffers =item Better diagnostics on meaningless filehandle operations =item Where possible, buffered data discarded from duped input filehandle =item eof() has the same old magic as <> =item binmode() can be used to set :crlf and :raw modes =item C<-T> filetest recognizes UTF-8 encoded files as "text" =item system(), backticks and pipe open now reflect exec() failure =item Improved diagnostics =item Diagnostics follow STDERR =item More consistent close-on-exec behavior =item syswrite() ease-of-use =item Better syntax checks on parenthesized unary operators =item Bit operators support full native integer width =item Improved security features =item More functional bareword prototype (*) =item C<require> and C<do> may be overridden =item $^X variables may now have names longer than one character =item New variable $^C reflects C<-c> switch =item New variable $^V contains Perl version as a string =item Optional Y2K warnings =item Arrays now always interpolate into double-quoted strings =item @- and @+ provide starting/ending offsets of regex submatches =back =item Modules and Pragmata =over 4 =item Modules attributes, B, Benchmark, ByteLoader, constant, charnames, Data::Dumper, DB, DB_File, Devel::DProf, Devel::Peek, Dumpvalue, DynaLoader, English, Env, Fcntl, File::Compare, File::Find, File::Glob, File::Spec, File::Spec::Functions, Getopt::Long, IO, JPL, lib, Math::BigInt, Math::Complex, Math::Trig, Pod::Parser, Pod::InputObjects, Pod::Checker, podchecker, Pod::ParseUtils, Pod::Find, Pod::Select, podselect, Pod::Usage, pod2usage, Pod::Text and Pod::Man, SDBM_File, Sys::Syslog, Sys::Hostname, Term::ANSIColor, Time::Local, Win32, XSLoader, DBM Filters =item Pragmata =back =item Utility Changes =over 4 =item dprofpp =item find2perl =item h2xs =item perlcc =item perldoc =item The Perl Debugger =back =item Improved Documentation perlapi.pod, perlboot.pod, perlcompile.pod, perldbmfilter.pod, perldebug.pod, perldebguts.pod, perlfork.pod, perlfilter.pod, perlhack.pod, perlintern.pod, perllexwarn.pod, perlnumber.pod, perlopentut.pod, perlreftut.pod, perltootc.pod, perltodo.pod, perlunicode.pod =item Performance enhancements =over 4 =item Simple sort() using { $a <=> $b } and the like are optimized =item Optimized assignments to lexical variables =item Faster subroutine calls =item delete(), each(), values() and hash iteration are faster =back =item Installation and Configuration Improvements =over 4 =item -Dusethreads means something different =item New Configure flags =item Threadedness and 64-bitness now more daring =item Long Doubles =item -Dusemorebits =item -Duselargefiles =item installusrbinperl =item SOCKS support =item C<-A> flag =item Enhanced Installation Directories =item gcc automatically tried if 'cc' does not seem to be working =back =item Platform specific changes =over 4 =item Supported platforms =item DOS =item OS390 (OpenEdition MVS) =item VMS =item Win32 =back =item Significant bug fixes =over 4 =item <HANDLE> on empty files =item C<eval '...'> improvements =item All compilation errors are true errors =item Implicitly closed filehandles are safer =item Behavior of list slices is more consistent =item C<(\$)> prototype and C<$foo{a}> =item C<goto &sub> and AUTOLOAD =item C<-bareword> allowed under C<use integer> =item Failures in DESTROY() =item Locale bugs fixed =item Memory leaks =item Spurious subroutine stubs after failed subroutine calls =item Taint failures under C<-U> =item END blocks and the C<-c> switch =item Potential to leak DATA filehandles =back =item New or Changed Diagnostics "%s" variable %s masks earlier declaration in same %s, "my sub" not yet implemented, "our" variable %s redeclared, '!' allowed only after types %s, / cannot take a count, / must be followed by a, A or Z, / must be followed by a*, A* or Z*, / must follow a numeric type, /%s/: Unrecognized escape \\%c passed through, /%s/: Unrecognized escape \\%c in character class passed through, /%s/ should probably be written as "%s", %s() called too early to check prototype, %s argument is not a HASH or ARRAY element, %s argument is not a HASH or ARRAY element or slice, %s argument is not a subroutine name, %s package attribute may clash with future reserved word: %s, (in cleanup) %s, <> should be quotes, Attempt to join self, Bad evalled substitution pattern, Bad realloc() ignored, Bareword found in conditional, Binary number > 0b11111111111111111111111111111111 non-portable, Bit vector size > 32 non-portable, Buffer overflow in prime_env_iter: %s, Can't check filesystem of script "%s", Can't declare class for non-scalar %s in "%s", Can't declare %s in "%s", Can't ignore signal CHLD, forcing to default, Can't modify non-lvalue subroutine call, Can't read CRTL environ, Can't remove %s: %s, skipping file, Can't return %s from lvalue subroutine, Can't weaken a nonreference, Character class [:%s:] unknown, Character class syntax [%s] belongs inside character classes, Constant is not %s reference, constant(%s): %s, CORE::%s is not a keyword, defined(@array) is deprecated, defined(%hash) is deprecated, Did not produce a valid header, (Did you mean "local" instead of "our"?), Document contains no data, entering effective %s failed, false [] range "%s" in regexp, Filehandle %s opened only for output, flock() on closed filehandle %s, Global symbol "%s" requires explicit package name, Hexadecimal number > 0xffffffff non-portable, Ill-formed CRTL environ value "%s", Ill-formed message in prime_env_iter: |%s|, Illegal binary digit %s, Illegal binary digit %s ignored, Illegal number of bits in vec, Integer overflow in %s number, Invalid %s attribute: %s, Invalid %s attributes: %s, invalid [] range "%s" in regexp, Invalid separator character %s in attribute list, Invalid separator character %s in subroutine attribute list, leaving effective %s failed, Lvalue subs returning %s not implemented yet, Method %s not permitted, Missing %sbrace%s on \N{}, Missing command in piped open, Missing name in "my sub", No %s specified for -%c, No package name allowed for variable %s in "our", No space allowed after -%c, no UTC offset information; assuming local time is UTC, Octal number > 037777777777 non-portable, panic: del_backref, panic: kid popen errno read, panic: magic_killbackrefs, Parentheses missing around "%s" list, Possible unintended interpolation of %s in string, Possible Y2K bug: %s, pragma "attrs" is deprecated, use "sub NAME : ATTRS" instead, Premature end of script headers, Repeat count in pack overflows, Repeat count in unpack overflows, realloc() of freed memory ignored, Reference is already weak, setpgrp can't take arguments, Strange *+?{} on zero-length expression, switching effective %s is not implemented, This Perl can't reset CRTL environ elements (%s), This Perl can't set CRTL environ elements (%s=%s), Too late to run %s block, Unknown open() mode '%s', Unknown process %x sent message to prime_env_iter: %s, Unrecognized escape \\%c passed through, Unterminated attribute parameter in attribute list, Unterminated attribute list, Unterminated attribute parameter in subroutine attribute list, Unterminated subroutine attribute list, Value of CLI symbol "%s" too long, Version number must be a constant number =item New tests =item Incompatible Changes =over 4 =item Perl Source Incompatibilities CHECK is a new keyword, Treatment of list slices of undef has changed, Format of $English::PERL_VERSION is different, Literals of the form C<1.2.3> parse differently, Possibly changed pseudo-random number generator, Hashing function for hash keys has changed, C<undef> fails on read only values, Close-on-exec bit may be set on pipe and socket handles, Writing C<"$$1"> to mean C<"${$}1"> is unsupported, delete(), each(), values() and C<\(%h)>, vec(EXPR,OFFSET,BITS) enforces powers-of-two BITS, Text of some diagnostic output has changed, C<%@> has been removed, Parenthesized not() behaves like a list operator, Semantics of bareword prototype C<(*)> have changed, Semantics of bit operators may have changed on 64-bit platforms, More builtins taint their results =item C Source Incompatibilities C<PERL_POLLUTE>, C<PERL_IMPLICIT_CONTEXT>, C<PERL_POLLUTE_MALLOC> =item Compatible C Source API Changes C<PATCHLEVEL> is now C<PERL_VERSION> =item Binary Incompatibilities =back =item Known Problems =over 4 =item Localizing a tied hash element may leak memory =item Known test failures =item EBCDIC platforms not fully supported =item UNICOS/mk CC failures during Configure run =item Arrow operator and arrays =item Experimental features Threads, Unicode, 64-bit support, Lvalue subroutines, Weak references, The pseudo-hash data type, The Compiler suite, Internal implementation of file globbing, The DB module, The regular expression code constructs: =back =item Obsolete Diagnostics Character class syntax [: :] is reserved for future extensions, Ill-formed logical name |%s| in prime_env_iter, In string, @%s now must be written as \@%s, Probable precedence problem on %s, regexp too big, Use of "$$<digit>" to mean "${$}<digit>" is deprecated =item Reporting Bugs =item SEE ALSO =item HISTORY =back =head2 perl56delta - what's new for perl v5.6.0 =over 4 =item DESCRIPTION =item Core Enhancements =over 4 =item Interpreter cloning, threads, and concurrency =item Lexically scoped warning categories =item Unicode and UTF-8 support =item Support for interpolating named characters =item "our" declarations =item Support for strings represented as a vector of ordinals =item Improved Perl version numbering system =item New syntax for declaring subroutine attributes =item File and directory handles can be autovivified =item open() with more than two arguments =item 64-bit support =item Large file support =item Long doubles =item "more bits" =item Enhanced support for sort() subroutines =item C<sort $coderef @foo> allowed =item File globbing implemented internally =item Support for CHECK blocks =item POSIX character class syntax [: :] supported =item Better pseudo-random number generator =item Improved C<qw//> operator =item Better worst-case behavior of hashes =item pack() format 'Z' supported =item pack() format modifier '!' supported =item pack() and unpack() support counted strings =item Comments in pack() templates =item Weak references =item Binary numbers supported =item Lvalue subroutines =item Some arrows may be omitted in calls through references =item Boolean assignment operators are legal lvalues =item exists() is supported on subroutine names =item exists() and delete() are supported on array elements =item Pseudo-hashes work better =item Automatic flushing of output buffers =item Better diagnostics on meaningless filehandle operations =item Where possible, buffered data discarded from duped input filehandle =item eof() has the same old magic as <> =item binmode() can be used to set :crlf and :raw modes =item C<-T> filetest recognizes UTF-8 encoded files as "text" =item system(), backticks and pipe open now reflect exec() failure =item Improved diagnostics =item Diagnostics follow STDERR =item More consistent close-on-exec behavior =item syswrite() ease-of-use =item Better syntax checks on parenthesized unary operators =item Bit operators support full native integer width =item Improved security features =item More functional bareword prototype (*) =item C<require> and C<do> may be overridden =item $^X variables may now have names longer than one character =item New variable $^C reflects C<-c> switch =item New variable $^V contains Perl version as a string =item Optional Y2K warnings =item Arrays now always interpolate into double-quoted strings =item @- and @+ provide starting/ending offsets of regex matches =back =item Modules and Pragmata =over 4 =item Modules attributes, B, Benchmark, ByteLoader, constant, charnames, Data::Dumper, DB, DB_File, Devel::DProf, Devel::Peek, Dumpvalue, DynaLoader, English, Env, Fcntl, File::Compare, File::Find, File::Glob, File::Spec, File::Spec::Functions, Getopt::Long, IO, JPL, lib, Math::BigInt, Math::Complex, Math::Trig, Pod::Parser, Pod::InputObjects, Pod::Checker, podchecker, Pod::ParseUtils, Pod::Find, Pod::Select, podselect, Pod::Usage, pod2usage, Pod::Text and Pod::Man, SDBM_File, Sys::Syslog, Sys::Hostname, Term::ANSIColor, Time::Local, Win32, XSLoader, DBM Filters =item Pragmata =back =item Utility Changes =over 4 =item dprofpp =item find2perl =item h2xs =item perlcc =item perldoc =item The Perl Debugger =back =item Improved Documentation perlapi.pod, perlboot.pod, perlcompile.pod, perldbmfilter.pod, perldebug.pod, perldebguts.pod, perlfork.pod, perlfilter.pod, perlhack.pod, perlintern.pod, perllexwarn.pod, perlnumber.pod, perlopentut.pod, perlreftut.pod, perltootc.pod, perltodo.pod, perlunicode.pod =item Performance enhancements =over 4 =item Simple sort() using { $a <=> $b } and the like are optimized =item Optimized assignments to lexical variables =item Faster subroutine calls =item delete(), each(), values() and hash iteration are faster =back =item Installation and Configuration Improvements =over 4 =item -Dusethreads means something different =item New Configure flags =item Threadedness and 64-bitness now more daring =item Long Doubles =item -Dusemorebits =item -Duselargefiles =item installusrbinperl =item SOCKS support =item C<-A> flag =item Enhanced Installation Directories =back =item Platform specific changes =over 4 =item Supported platforms =item DOS =item OS390 (OpenEdition MVS) =item VMS =item Win32 =back =item Significant bug fixes =over 4 =item <HANDLE> on empty files =item C<eval '...'> improvements =item All compilation errors are true errors =item Implicitly closed filehandles are safer =item Behavior of list slices is more consistent =item C<(\$)> prototype and C<$foo{a}> =item C<goto &sub> and AUTOLOAD =item C<-bareword> allowed under C<use integer> =item Failures in DESTROY() =item Locale bugs fixed =item Memory leaks =item Spurious subroutine stubs after failed subroutine calls =item Taint failures under C<-U> =item END blocks and the C<-c> switch =item Potential to leak DATA filehandles =back =item New or Changed Diagnostics "%s" variable %s masks earlier declaration in same %s, "my sub" not yet implemented, "our" variable %s redeclared, '!' allowed only after types %s, / cannot take a count, / must be followed by a, A or Z, / must be followed by a*, A* or Z*, / must follow a numeric type, /%s/: Unrecognized escape \\%c passed through, /%s/: Unrecognized escape \\%c in character class passed through, /%s/ should probably be written as "%s", %s() called too early to check prototype, %s argument is not a HASH or ARRAY element, %s argument is not a HASH or ARRAY element or slice, %s argument is not a subroutine name, %s package attribute may clash with future reserved word: %s, (in cleanup) %s, <> should be quotes, Attempt to join self, Bad evalled substitution pattern, Bad realloc() ignored, Bareword found in conditional, Binary number > 0b11111111111111111111111111111111 non-portable, Bit vector size > 32 non-portable, Buffer overflow in prime_env_iter: %s, Can't check filesystem of script "%s", Can't declare class for non-scalar %s in "%s", Can't declare %s in "%s", Can't ignore signal CHLD, forcing to default, Can't modify non-lvalue subroutine call, Can't read CRTL environ, Can't remove %s: %s, skipping file, Can't return %s from lvalue subroutine, Can't weaken a nonreference, Character class [:%s:] unknown, Character class syntax [%s] belongs inside character classes, Constant is not %s reference, constant(%s): %s, CORE::%s is not a keyword, defined(@array) is deprecated, defined(%hash) is deprecated, Did not produce a valid header, (Did you mean "local" instead of "our"?), Document contains no data, entering effective %s failed, false [] range "%s" in regexp, Filehandle %s opened only for output, flock() on closed filehandle %s, Global symbol "%s" requires explicit package name, Hexadecimal number > 0xffffffff non-portable, Ill-formed CRTL environ value "%s", Ill-formed message in prime_env_iter: |%s|, Illegal binary digit %s, Illegal binary digit %s ignored, Illegal number of bits in vec, Integer overflow in %s number, Invalid %s attribute: %s, Invalid %s attributes: %s, invalid [] range "%s" in regexp, Invalid separator character %s in attribute list, Invalid separator character %s in subroutine attribute list, leaving effective %s failed, Lvalue subs returning %s not implemented yet, Method %s not permitted, Missing %sbrace%s on \N{}, Missing command in piped open, Missing name in "my sub", No %s specified for -%c, No package name allowed for variable %s in "our", No space allowed after -%c, no UTC offset information; assuming local time is UTC, Octal number > 037777777777 non-portable, panic: del_backref, panic: kid popen errno read, panic: magic_killbackrefs, Parentheses missing around "%s" list, Possible unintended interpolation of %s in string, Possible Y2K bug: %s, pragma "attrs" is deprecated, use "sub NAME : ATTRS" instead, Premature end of script headers, Repeat count in pack overflows, Repeat count in unpack overflows, realloc() of freed memory ignored, Reference is already weak, setpgrp can't take arguments, Strange *+?{} on zero-length expression, switching effective %s is not implemented, This Perl can't reset CRTL environ elements (%s), This Perl can't set CRTL environ elements (%s=%s), Too late to run %s block, Unknown open() mode '%s', Unknown process %x sent message to prime_env_iter: %s, Unrecognized escape \\%c passed through, Unterminated attribute parameter in attribute list, Unterminated attribute list, Unterminated attribute parameter in subroutine attribute list, Unterminated subroutine attribute list, Value of CLI symbol "%s" too long, Version number must be a constant number =item New tests =item Incompatible Changes =over 4 =item Perl Source Incompatibilities CHECK is a new keyword, Treatment of list slices of undef has changed, Format of $English::PERL_VERSION is different, Literals of the form C<1.2.3> parse differently, Possibly changed pseudo-random number generator, Hashing function for hash keys has changed, C<undef> fails on read only values, Close-on-exec bit may be set on pipe and socket handles, Writing C<"$$1"> to mean C<"${$}1"> is unsupported, delete(), each(), values() and C<\(%h)>, vec(EXPR,OFFSET,BITS) enforces powers-of-two BITS, Text of some diagnostic output has changed, C<%@> has been removed, Parenthesized not() behaves like a list operator, Semantics of bareword prototype C<(*)> have changed, Semantics of bit operators may have changed on 64-bit platforms, More builtins taint their results =item C Source Incompatibilities C<PERL_POLLUTE>, C<PERL_IMPLICIT_CONTEXT>, C<PERL_POLLUTE_MALLOC> =item Compatible C Source API Changes C<PATCHLEVEL> is now C<PERL_VERSION> =item Binary Incompatibilities =back =item Known Problems =over 4 =item Thread test failures =item EBCDIC platforms not supported =item In 64-bit HP-UX the lib/io_multihomed test may hang =item NEXTSTEP 3.3 POSIX test failure =item Tru64 (aka Digital UNIX, aka DEC OSF/1) lib/sdbm test failure with gcc =item UNICOS/mk CC failures during Configure run =item Arrow operator and arrays =item Experimental features Threads, Unicode, 64-bit support, Lvalue subroutines, Weak references, The pseudo-hash data type, The Compiler suite, Internal implementation of file globbing, The DB module, The regular expression code constructs: =back =item Obsolete Diagnostics Character class syntax [: :] is reserved for future extensions, Ill-formed logical name |%s| in prime_env_iter, In string, @%s now must be written as \@%s, Probable precedence problem on %s, regexp too big, Use of "$$<digit>" to mean "${$}<digit>" is deprecated =item Reporting Bugs =item SEE ALSO =item HISTORY =back =head2 perl5005delta - what's new for perl5.005 =over 4 =item DESCRIPTION =item About the new versioning system =item Incompatible Changes =over 4 =item WARNING: This version is not binary compatible with Perl 5.004. =item Default installation structure has changed =item Perl Source Compatibility =item C Source Compatibility =item Binary Compatibility =item Security fixes may affect compatibility =item Relaxed new mandatory warnings introduced in 5.004 =item Licensing =back =item Core Changes =over 4 =item Threads =item Compiler =item Regular Expressions Many new and improved optimizations, Many bug fixes, New regular expression constructs, New operator for precompiled regular expressions, Other improvements, Incompatible changes =item Improved malloc() =item Quicksort is internally implemented =item Reliable signals =item Reliable stack pointers =item More generous treatment of carriage returns =item Memory leaks =item Better support for multiple interpreters =item Behavior of local() on array and hash elements is now well-defined =item C<%!> is transparently tied to the L<Errno> module =item Pseudo-hashes are supported =item C<EXPR foreach EXPR> is supported =item Keywords can be globally overridden =item C<$^E> is meaningful on Win32 =item C<foreach (1..1000000)> optimized =item C<Foo::> can be used as implicitly quoted package name =item C<exists $Foo::{Bar::}> tests existence of a package =item Better locale support =item Experimental support for 64-bit platforms =item prototype() returns useful results on builtins =item Extended support for exception handling =item Re-blessing in DESTROY() supported for chaining DESTROY() methods =item All C<printf> format conversions are handled internally =item New C<INIT> keyword =item New C<lock> keyword =item New C<qr//> operator =item C<our> is now a reserved word =item Tied arrays are now fully supported =item Tied handles support is better =item 4th argument to substr =item Negative LENGTH argument to splice =item Magic lvalues are now more magical =item <> now reads in records =back =item Supported Platforms =over 4 =item New Platforms =item Changes in existing support =back =item Modules and Pragmata =over 4 =item New Modules B, Data::Dumper, Dumpvalue, Errno, File::Spec, ExtUtils::Installed, ExtUtils::Packlist, Fatal, IPC::SysV, Test, Tie::Array, Tie::Handle, Thread, attrs, fields, re =item Changes in existing modules Benchmark, Carp, CGI, Fcntl, Math::Complex, Math::Trig, POSIX, DB_File, MakeMaker, CPAN, Cwd =back =item Utility Changes =item Documentation Changes =item New Diagnostics Ambiguous call resolved as CORE::%s(), qualify as such or use &, Bad index while coercing array into hash, Bareword "%s" refers to nonexistent package, Can't call method "%s" on an undefined value, Can't check filesystem of script "%s" for nosuid, Can't coerce array into hash, Can't goto subroutine from an eval-string, Can't localize pseudo-hash element, Can't use %%! because Errno.pm is not available, Cannot find an opnumber for "%s", Character class syntax [. .] is reserved for future extensions, Character class syntax [: :] is reserved for future extensions, Character class syntax [= =] is reserved for future extensions, %s: Eval-group in insecure regular expression, %s: Eval-group not allowed, use re 'eval', %s: Eval-group not allowed at run time, Explicit blessing to '' (assuming package main), Illegal hex digit ignored, No such array field, No such field "%s" in variable %s of type %s, Out of memory during ridiculously large request, Range iterator outside integer range, Recursive inheritance detected while looking for method '%s' %s, Reference found where even-sized list expected, Undefined value assigned to typeglob, Use of reserved word "%s" is deprecated, perl: warning: Setting locale failed =item Obsolete Diagnostics Can't mktemp(), Can't write to temp file for B<-e>: %s, Cannot open temporary file, regexp too big =item Configuration Changes =item BUGS =item SEE ALSO =item HISTORY =back =head2 perl5004delta - what's new for perl5.004 =over 4 =item DESCRIPTION =item Supported Environments =item Core Changes =over 4 =item List assignment to %ENV works =item Change to "Can't locate Foo.pm in @INC" error =item Compilation option: Binary compatibility with 5.003 =item $PERL5OPT environment variable =item Limitations on B<-M>, B<-m>, and B<-T> options =item More precise warnings =item Deprecated: Inherited C<AUTOLOAD> for non-methods =item Previously deprecated %OVERLOAD is no longer usable =item Subroutine arguments created only when they're modified =item Group vector changeable with C<$)> =item Fixed parsing of $$<digit>, &$<digit>, etc. =item Fixed localization of $<digit>, $&, etc. =item No resetting of $. on implicit close =item C<wantarray> may return undef =item C<eval EXPR> determines value of EXPR in scalar context =item Changes to tainting checks No glob() or <*>, No spawning if tainted $CDPATH, $ENV, $BASH_ENV, No spawning if tainted $TERM doesn't look like a terminal name =item New Opcode module and revised Safe module =item Embedding improvements =item Internal change: FileHandle class based on IO::* classes =item Internal change: PerlIO abstraction interface =item New and changed syntax $coderef->(PARAMS) =item New and changed builtin constants __PACKAGE__ =item New and changed builtin variables $^E, $^H, $^M =item New and changed builtin functions delete on slices, flock, printf and sprintf, keys as an lvalue, my() in Control Structures, pack() and unpack(), sysseek(), use VERSION, use Module VERSION LIST, prototype(FUNCTION), srand, $_ as Default, C<m//gc> does not reset search position on failure, C<m//x> ignores whitespace before ?*+{}, nested C<sub{}> closures work now, formats work right on changing lexicals =item New builtin methods isa(CLASS), can(METHOD), VERSION( [NEED] ) =item TIEHANDLE now supported TIEHANDLE classname, LIST, PRINT this, LIST, PRINTF this, LIST, READ this LIST, READLINE this, GETC this, DESTROY this =item Malloc enhancements -DPERL_EMERGENCY_SBRK, -DPACK_MALLOC, -DTWO_POT_OPTIMIZE =item Miscellaneous efficiency enhancements =back =item Support for More Operating Systems =over 4 =item Win32 =item Plan 9 =item QNX =item AmigaOS =back =item Pragmata use autouse MODULE => qw(sub1 sub2 sub3), use blib, use blib 'dir', use constant NAME => VALUE, use locale, use ops, use vmsish =item Modules =over 4 =item Required Updates =item Installation directories =item Module information summary =item Fcntl =item IO =item Math::Complex =item Math::Trig =item DB_File =item Net::Ping =item Object-oriented overrides for builtin operators =back =item Utility Changes =over 4 =item pod2html Sends converted HTML to standard output =item xsubpp C<void> XSUBs now default to returning nothing =back =item C Language API Changes C<gv_fetchmethod> and C<perl_call_sv>, C<perl_eval_pv>, Extended API for manipulating hashes =item Documentation Changes L<perldelta>, L<perlfaq>, L<perllocale>, L<perltoot>, L<perlapio>, L<perlmodlib>, L<perldebug>, L<perlsec> =item New Diagnostics "my" variable %s masks earlier declaration in same scope, %s argument is not a HASH element or slice, Allocation too large: %lx, Allocation too large, Applying %s to %s will act on scalar(%s), Attempt to free nonexistent shared string, Attempt to use reference as lvalue in substr, Bareword "%s" refers to nonexistent package, Can't redefine active sort subroutine %s, Can't use bareword ("%s") as %s ref while "strict refs" in use, Cannot resolve method `%s' overloading `%s' in package `%s', Constant subroutine %s redefined, Constant subroutine %s undefined, Copy method did not return a reference, Died, Exiting pseudo-block via %s, Identifier too long, Illegal character %s (carriage return), Illegal switch in PERL5OPT: %s, Integer overflow in hex number, Integer overflow in octal number, internal error: glob failed, Invalid conversion in %s: "%s", Invalid type in pack: '%s', Invalid type in unpack: '%s', Name "%s::%s" used only once: possible typo, Null picture in formline, Offset outside string, Out of memory!, Out of memory during request for %s, panic: frexp, Possible attempt to put comments in qw() list, Possible attempt to separate words with commas, Scalar value @%s{%s} better written as $%s{%s}, Stub found while resolving method `%s' overloading `%s' in %s, Too late for "B<-T>" option, untie attempted while %d inner references still exist, Unrecognized character %s, Unsupported function fork, Use of "$$<digit>" to mean "${$}<digit>" is deprecated, Value of %s can be "0"; test with defined(), Variable "%s" may be unavailable, Variable "%s" will not stay shared, Warning: something's wrong, Ill-formed logical name |%s| in prime_env_iter, Got an error from DosAllocMem, Malformed PERLLIB_PREFIX, PERL_SH_DIR too long, Process terminated by SIG%s =item BUGS =item SEE ALSO =item HISTORY =back =head2 perlexperiment - A listing of experimental features in Perl =over 4 =item DESCRIPTION =over 4 =item Current experiments Smart match (C<~~>), Pluggable keywords, Regular Expression Set Operations, Subroutine signatures, Aliasing via reference, The "const" attribute, use re 'strict';, The <:win32> IO pseudolayer, Declaring a reference to a variable, There is an C<installhtml> target in the Makefile, (Limited) Variable-length look-behind =item Accepted features 64-bit support, die accepts a reference, DB module, Weak references, Internal file glob, fork() emulation, -Dusemultiplicity -Duseithreads, Support for long doubles, The C<\N> regex character class, C<(?{code})> and C<(??{ code })>, Linux abstract Unix domain sockets, Lvalue subroutines, Backtracking control verbs, The <:pop> IO pseudolayer, C<\s> in regexp matches vertical tab, Postfix dereference syntax, Lexical subroutines, String- and number-specific bitwise operators, Alphabetic assertions, Script runs =item Removed features 5.005-style threading, perlcc, The pseudo-hash data type, GetOpt::Long Options can now take multiple values at once (experimental), Assertions, Test::Harness::Straps, C<legacy>, Lexical C<$_>, Array and hash container functions accept references, C<our> can have an experimental optional attribute C<unique> =back =item SEE ALSO =item AUTHORS =item COPYRIGHT =item LICENSE =back =head2 perlartistic - the Perl Artistic License =over 4 =item SYNOPSIS =item DESCRIPTION =item The "Artistic License" =over 4 =item Preamble =item Definitions "Package", "Standard Version", "Copyright Holder", "You", "Reasonable copying fee", "Freely Available" =item Conditions a), b), c), d), a), b), c), d) =back =back =head2 perlgpl - the GNU General Public License, version 1 =over 4 =item SYNOPSIS =item DESCRIPTION =back =over 4 =item GNU GENERAL PUBLIC LICENSE =back =head2 perlaix - Perl version 5 on IBM AIX (UNIX) systems =over 4 =item DESCRIPTION =over 4 =item Compiling Perl 5 on AIX =item Supported Compilers =item Incompatibility with AIX Toolbox lib gdbm =item Perl 5 was successfully compiled and tested on: =item Building Dynamic Extensions on AIX =item Using Large Files with Perl =item Threaded Perl =item 64-bit Perl =item Long doubles =item Recommended Options AIX 5.1/5.2/5.3/6.1 and 7.1 (threaded/32-bit) =item Recommended Options AIX 5.1/5.2/5.3/6.1 and 7.1 (32-bit) =item Recommended Options AIX 5.1/5.2/5.3/6.1 and 7.1 (threaded/64-bit) =item Recommended Options AIX 5.1/5.2/5.3/6.1 and 7.1 (64-bit) =item Compiling Perl 5 on AIX 7.1.0 =item Compiling Perl 5 on older AIX versions up to 4.3.3 =item OS level =item Building Dynamic Extensions on AIX E<lt> 5L =item The IBM ANSI C Compiler =item The usenm option =item Using GNU's gcc for building Perl =item Using Large Files with Perl E<lt> 5L =item Threaded Perl E<lt> 5L =item 64-bit Perl E<lt> 5L =item AIX 4.2 and extensions using C++ with statics =back =item AUTHORS =back =head2 perlamiga - Perl under AmigaOS 4.1 =over 4 =item NOTE =item SYNOPSIS =back =over 4 =item DESCRIPTION =over 4 =item Prerequisites for running Perl 5.22.1 under AmigaOS 4.1 B<AmigaOS 4.1 update 6 with all updates applied as of 9th October 2013>, B<newlib.library version 53.28 or greater>, B<AmigaOS SDK>, B<abc-shell> =item Starting Perl programs under AmigaOS 4.1 =item Limitations of Perl under AmigaOS 4.1 B<Nested Piped programs can crash when run from older abc-shells>, B<Incorrect or unexpected command line unescaping>, B<Starting subprocesses via open has limitations>, If you find any other limitations or bugs then let me know =back =item INSTALLATION =item Amiga Specific Modules =over 4 =item Amiga::ARexx =item Amiga::Exec =back =item BUILDING =item CHANGES B<August 2015>, Port to Perl 5.22, Add handling of NIL: to afstat(), Fix inheritance of environment variables by subprocesses, Fix exec, and exit in "forked" subprocesses, Fix issue with newlib's unlink, which could cause infinite loops, Add flock() emulation using IDOS->LockRecord thanks to Tony Cook for the suggestion, Fix issue where kill was using the wrong kind of process ID, B<27th November 2013>, Create new installation system based on installperl links and Amiga protection bits now set correctly, Pod now defaults to text, File::Spec should now recognise an Amiga style absolute path as well as an Unix style one. Relative paths must always be Unix style, B<20th November 2013>, Configured to use SDK:Local/C/perl to start standard scripts, Added Amiga::Exec module with support for Wait() and AmigaOS signal numbers, B<10th October 13> =item SEE ALSO =back =head2 perlandroid - Perl under Android =over 4 =item SYNOPSIS =item DESCRIPTION =item Cross-compilation =over 4 =item Get the Android Native Development Kit (NDK) =item Determine the architecture you'll be cross-compiling for =item Set up a standalone toolchain =item adb or ssh? =item Configure and beyond =back =item Native Builds =over 4 =item CCTools =item Termux =back =item AUTHOR =back =head2 perlbs2000 - building and installing Perl for BS2000. =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item gzip on BS2000 =item bison on BS2000 =item Unpacking Perl Distribution on BS2000 =item Compiling Perl on BS2000 =item Testing Perl on BS2000 =item Installing Perl on BS2000 =item Using Perl in the Posix-Shell of BS2000 =item Using Perl in "native" BS2000 =item Floating point anomalies on BS2000 =item Using PerlIO and different encodings on ASCII and EBCDIC partitions =back =item AUTHORS =item SEE ALSO =over 4 =item Mailing list =back =item HISTORY =back =head2 perlcygwin - Perl for Cygwin =over 4 =item SYNOPSIS =item PREREQUISITES FOR COMPILING PERL ON CYGWIN =over 4 =item Cygwin = GNU+Cygnus+Windows (Don't leave UNIX without it) =item Cygwin Configuration C<PATH>, I<nroff> =back =item CONFIGURE PERL ON CYGWIN =over 4 =item Stripping Perl Binaries on Cygwin =item Optional Libraries for Perl on Cygwin C<-lcrypt>, C<-lgdbm_compat> (C<use GDBM_File>), C<-ldb> (C<use DB_File>), C<cygserver> (C<use IPC::SysV>), C<-lutil> =item Configure-time Options for Perl on Cygwin C<-Uusedl>, C<-Dusemymalloc>, C<-Uuseperlio>, C<-Dusemultiplicity>, C<-Uuse64bitint>, C<-Duselongdouble>, C<-Uuseithreads>, C<-Duselargefiles>, C<-Dmksymlinks> =item Suspicious Warnings on Cygwin Win9x and C<d_eofnblk>, Compiler/Preprocessor defines =back =item MAKE ON CYGWIN =item TEST ON CYGWIN =over 4 =item File Permissions on Cygwin =item NDBM_File and ODBM_File do not work on FAT filesystems =item C<fork()> failures in io_* tests =back =item Specific features of the Cygwin port =over 4 =item Script Portability on Cygwin Pathnames, Text/Binary, PerlIO, F<.exe>, Cygwin vs. Windows process ids, Cygwin vs. Windows errors, rebase errors on fork or system, C<chown()>, Miscellaneous =item Prebuilt methods: C<Cwd::cwd>, C<Cygwin::pid_to_winpid>, C<Cygwin::winpid_to_pid>, C<Cygwin::win_to_posix_path>, C<Cygwin::posix_to_win_path>, C<Cygwin::mount_table()>, C<Cygwin::mount_flags>, C<Cygwin::is_binmount>, C<Cygwin::sync_winenv> =back =item INSTALL PERL ON CYGWIN =item MANIFEST ON CYGWIN Documentation, Build, Configure, Make, Install, Tests, Compiled Perl Source, Compiled Module Source, Perl Modules/Scripts, Perl Module Tests =item BUGS ON CYGWIN =item AUTHORS =item HISTORY =back =head2 perldos - Perl under DOS, W31, W95. =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Prerequisites for Compiling Perl on DOS DJGPP, Pthreads =item Shortcomings of Perl under DOS =item Building Perl on DOS =item Testing Perl on DOS =item Installation of Perl on DOS =back =item BUILDING AND INSTALLING MODULES ON DOS =over 4 =item Building Prerequisites for Perl on DOS =item Unpacking CPAN Modules on DOS =item Building Non-XS Modules on DOS =item Building XS Modules on DOS =back =item AUTHOR =item SEE ALSO =back =head2 perlfreebsd - Perl version 5 on FreeBSD systems =over 4 =item DESCRIPTION =over 4 =item FreeBSD core dumps from readdir_r with ithreads =item C<$^X> doesn't always contain a full path in FreeBSD =back =item AUTHOR =back =head2 perlhaiku - Perl version 5.10+ on Haiku =over 4 =item DESCRIPTION =item BUILD AND INSTALL =item KNOWN PROBLEMS =item CONTACT =back =head2 perlhpux - Perl version 5 on Hewlett-Packard Unix (HP-UX) systems =over 4 =item DESCRIPTION =over 4 =item Using perl as shipped with HP-UX =item Using perl from HP's porting centre =item Other prebuilt perl binaries =item Compiling Perl 5 on HP-UX =item PA-RISC =item PA-RISC 1.0 =item PA-RISC 1.1 =item PA-RISC 2.0 =item Portability Between PA-RISC Versions =item Itanium Processor Family (IPF) and HP-UX =item Itanium, Itanium 2 & Madison 6 =item HP-UX versions =item Building Dynamic Extensions on HP-UX =item The HP ANSI C Compiler =item The GNU C Compiler =item Using Large Files with Perl on HP-UX =item Threaded Perl on HP-UX =item 64-bit Perl on HP-UX =item Oracle on HP-UX =item GDBM and Threads on HP-UX =item NFS filesystems and utime(2) on HP-UX =item HP-UX Kernel Parameters (maxdsiz) for Compiling Perl =back =item nss_delete core dump from op/pwent or op/grent =item error: pasting ")" and "l" does not give a valid preprocessing token =item Redeclaration of "sendpath" with a different storage class specifier =item Miscellaneous =item AUTHOR =back =head2 perlhurd - Perl version 5 on Hurd =over 4 =item DESCRIPTION =over 4 =item Known Problems with Perl on Hurd =back =item AUTHOR =back =head2 perlirix - Perl version 5 on Irix systems =over 4 =item DESCRIPTION =over 4 =item Building 32-bit Perl in Irix =item Building 64-bit Perl in Irix =item About Compiler Versions of Irix =item Linker Problems in Irix =item Malloc in Irix =item Building with threads in Irix =item Irix 5.3 =back =item AUTHOR =back =head2 perllinux - Perl version 5 on Linux systems =over 4 =item DESCRIPTION =over 4 =item Deploying Perl on Linux =item Experimental Support for Sun Studio Compilers for Linux OS =back =item AUTHOR =back =head2 perlmacos - Perl under Mac OS (Classic) =over 4 =item SYNOPSIS =item DESCRIPTION =item AUTHOR =back =head2 perlmacosx - Perl under Mac OS X =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Installation Prefix =item SDK support =item Universal Binary support =item 64-bit PPC support =item libperl and Prebinding =item Updating Apple's Perl =item Known problems =item Cocoa =back =item Starting From Scratch =item AUTHOR =item DATE =back =head2 perlnetware - Perl for NetWare =over 4 =item DESCRIPTION =item BUILD =over 4 =item Tools & SDK =item Setup SetNWBld.bat, Buildtype.bat =item Make =item Interpreter =item Extensions =back =item INSTALL =item BUILD NEW EXTENSIONS =item ACKNOWLEDGEMENTS =item AUTHORS =item DATE =back =head2 perlopenbsd - Perl version 5 on OpenBSD systems =over 4 =item DESCRIPTION =over 4 =item OpenBSD core dumps from getprotobyname_r and getservbyname_r with ithreads =back =item AUTHOR =back =head2 perlos2 - Perl under OS/2, DOS, Win0.3*, Win0.95 and WinNT. =over 4 =item SYNOPSIS =back =over 4 =item DESCRIPTION =over 4 =item Target =item Other OSes =item Prerequisites EMX, RSX, HPFS, pdksh =item Starting Perl programs under OS/2 (and DOS and...) =item Starting OS/2 (and DOS) programs under Perl =back =item Frequently asked questions =over 4 =item "It does not work" =item I cannot run external programs =item I cannot embed perl into my program, or use F<perl.dll> from my program. Is your program EMX-compiled with C<-Zmt -Zcrtdll>?, Did you use L<ExtUtils::Embed>? =item C<``> and pipe-C<open> do not work under DOS. =item Cannot start C<find.exe "pattern" file> =back =item INSTALLATION =over 4 =item Automatic binary installation C<PERL_BADLANG>, C<PERL_BADFREE>, F<Config.pm> =item Manual binary installation Perl VIO and PM executables (dynamically linked), Perl_ VIO executable (statically linked), Executables for Perl utilities, Main Perl library, Additional Perl modules, Tools to compile Perl modules, Manpages for Perl and utilities, Manpages for Perl modules, Source for Perl documentation, Perl manual in F<.INF> format, Pdksh =item B<Warning> =back =item Accessing documentation =over 4 =item OS/2 F<.INF> file =item Plain text =item Manpages =item HTML =item GNU C<info> files =item F<PDF> files =item C<LaTeX> docs =back =item BUILD =over 4 =item The short story =item Prerequisites =item Getting perl source =item Application of the patches =item Hand-editing =item Making =item Testing A lot of C<bad free>, Process terminated by SIGTERM/SIGINT, F<op/fs.t>, Z<>18, Z<>25, F<op/stat.t> =item Installing the built perl =item C<a.out>-style build =back =item Building a binary distribution =item Building custom F<.EXE> files =over 4 =item Making executables with a custom collection of statically loaded extensions =item Making executables with a custom search-paths =back =item Build FAQ =over 4 =item Some C</> became C<\> in pdksh. =item C<'errno'> - unresolved external =item Problems with tr or sed =item Some problem (forget which ;-) =item Library ... not found =item Segfault in make =item op/sprintf test failure =back =item Specific (mis)features of OS/2 port =over 4 =item C<setpriority>, C<getpriority> =item C<system()> =item C<extproc> on the first line =item Additional modules: =item Prebuilt methods: C<File::Copy::syscopy>, C<DynaLoader::mod2fname>, C<Cwd::current_drive()>, C<Cwd::sys_chdir(name)>, C<Cwd::change_drive(name)>, C<Cwd::sys_is_absolute(name)>, C<Cwd::sys_is_rooted(name)>, C<Cwd::sys_is_relative(name)>, C<Cwd::sys_cwd(name)>, C<Cwd::sys_abspath(name, dir)>, C<Cwd::extLibpath([type])>, C<Cwd::extLibpath_set( path [, type ] )>, C<OS2::Error(do_harderror,do_exception)>, C<OS2::Errors2Drive(drive)>, OS2::SysInfo(), OS2::BootDrive(), C<OS2::MorphPM(serve)>, C<OS2::UnMorphPM(serve)>, C<OS2::Serve_Messages(force)>, C<OS2::Process_Messages(force [, cnt])>, C<OS2::_control87(new,mask)>, OS2::get_control87(), C<OS2::set_control87_em(new=MCW_EM,mask=MCW_EM)>, C<OS2::DLLname([how [, \&xsub]])> =item Prebuilt variables: $OS2::emx_rev, $OS2::emx_env, $OS2::os_ver, $OS2::is_aout, $OS2::can_fork, $OS2::nsyserror =item Misfeatures =item Modifications C<popen>, C<tmpnam>, C<tmpfile>, C<ctermid>, C<stat>, C<mkdir>, C<rmdir>, C<flock> =item Identifying DLLs =item Centralized management of resources C<HAB>, C<HMQ>, Treating errors reported by OS/2 API, C<CheckOSError(expr)>, C<CheckWinError(expr)>, C<SaveWinError(expr)>, C<SaveCroakWinError(expr,die,name1,name2)>, C<WinError_2_Perl_rc>, C<FillWinError>, C<FillOSError(rc)>, Loading DLLs and ordinals in DLLs =back =item Perl flavors =over 4 =item F<perl.exe> =item F<perl_.exe> =item F<perl__.exe> =item F<perl___.exe> =item Why strange names? =item Why dynamic linking? =item Why chimera build? =back =item ENVIRONMENT =over 4 =item C<PERLLIB_PREFIX> =item C<PERL_BADLANG> =item C<PERL_BADFREE> =item C<PERL_SH_DIR> =item C<USE_PERL_FLOCK> =item C<TMP> or C<TEMP> =back =item Evolution =over 4 =item Text-mode filehandles =item Priorities =item DLL name mangling: pre 5.6.2 =item DLL name mangling: 5.6.2 and beyond Global DLLs, specific DLLs, C<BEGINLIBPATH> and C<ENDLIBPATH>, F<.> from C<LIBPATH> =item DLL forwarder generation =item Threading =item Calls to external programs =item Memory allocation =item Threads C<COND_WAIT>, F<os2.c> =back =item BUGS =back =over 4 =item AUTHOR =item SEE ALSO =back =head2 perlos390 - building and installing Perl for OS/390 and z/OS =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Tools =item Unpacking Perl distribution on OS/390 =item Setup and utilities for Perl on OS/390 =item Configure Perl on OS/390 =item Build, Test, Install Perl on OS/390 =item Build Anomalies with Perl on OS/390 =item Testing Anomalies with Perl on OS/390 =item Installation Anomalies with Perl on OS/390 =item Usage Hints for Perl on OS/390 =item Floating Point Anomalies with Perl on OS/390 =item Modules and Extensions for Perl on OS/390 =back =item AUTHORS =item SEE ALSO =over 4 =item Mailing list for Perl on OS/390 =back =item HISTORY =back =head2 perlos400 - Perl version 5 on OS/400 =over 4 =item DESCRIPTION =over 4 =item Compiling Perl for OS/400 PASE =item Installing Perl in OS/400 PASE =item Using Perl in OS/400 PASE =item Known Problems =item Perl on ILE =back =item AUTHORS =back =head2 perlplan9 - Plan 9-specific documentation for Perl =over 4 =item DESCRIPTION =over 4 =item Invoking Perl =item What's in Plan 9 Perl =item What's not in Plan 9 Perl =item Perl5 Functions not currently supported in Plan 9 Perl =item Signals in Plan 9 Perl =back =item COMPILING AND INSTALLING PERL ON PLAN 9 =over 4 =item Installing Perl Documentation on Plan 9 =back =item BUGS =item Revision date =item AUTHOR =back =head2 perlqnx - Perl version 5 on QNX =over 4 =item DESCRIPTION =over 4 =item Required Software for Compiling Perl on QNX4 /bin/sh, ar, nm, cpp, make =item Outstanding Issues with Perl on QNX4 =item QNX auxiliary files qnx/ar, qnx/cpp =item Outstanding issues with perl under QNX6 =item Cross-compilation =back =item AUTHOR =back =head2 perlriscos - Perl version 5 for RISC OS =over 4 =item DESCRIPTION =item BUILD =item AUTHOR =back =head2 perlsolaris - Perl version 5 on Solaris systems =over 4 =item DESCRIPTION =over 4 =item Solaris Version Numbers. =back =item RESOURCES Solaris FAQ, Precompiled Binaries, Solaris Documentation =item SETTING UP =over 4 =item File Extraction Problems on Solaris. =item Compiler and Related Tools on Solaris. =item Environment for Compiling perl on Solaris =back =item RUN CONFIGURE. =over 4 =item 64-bit perl on Solaris. =item Threads in perl on Solaris. =item Malloc Issues with perl on Solaris. =back =item MAKE PROBLEMS. Dynamic Loading Problems With GNU as and GNU ld, ld.so.1: ./perl: fatal: relocation error:, dlopen: stub interception failed, #error "No DATAMODEL_NATIVE specified", sh: ar: not found =item MAKE TEST =over 4 =item op/stat.t test 4 in Solaris =item nss_delete core dump from op/pwent or op/grent =back =item CROSS-COMPILATION =item PREBUILT BINARIES OF PERL FOR SOLARIS. =item RUNTIME ISSUES FOR PERL ON SOLARIS. =over 4 =item Limits on Numbers of Open Files on Solaris. =back =item SOLARIS-SPECIFIC MODULES. =item SOLARIS-SPECIFIC PROBLEMS WITH MODULES. =over 4 =item Proc::ProcessTable on Solaris =item BSD::Resource on Solaris =item Net::SSLeay on Solaris =back =item SunOS 4.x =item AUTHOR =back =head2 perlsymbian - Perl version 5 on Symbian OS =over 4 =item DESCRIPTION =over 4 =item Compiling Perl on Symbian =item Compilation problems =item PerlApp =item sisify.pl =item Using Perl in Symbian =back =item TO DO =item WARNING =item NOTE =item AUTHOR =item COPYRIGHT =item LICENSE =item HISTORY =back =head2 perlsynology - Perl 5 on Synology DSM systems =over 4 =item DESCRIPTION =over 4 =item Setting up the build environment =item Compiling Perl 5 =item Known problems Error message "No error definitions found", F<ext/DynaLoader/t/DynaLoader.t> =item Smoke testing Perl 5 =item Adding libraries =back =item REVISION =item AUTHOR =back =head2 perltru64 - Perl version 5 on Tru64 (formerly known as Digital UNIX formerly known as DEC OSF/1) systems =over 4 =item DESCRIPTION =over 4 =item Compiling Perl 5 on Tru64 =item Using Large Files with Perl on Tru64 =item Threaded Perl on Tru64 =item Long Doubles on Tru64 =item DB_File tests failing on Tru64 =item 64-bit Perl on Tru64 =item Warnings about floating-point overflow when compiling Perl on Tru64 =back =item Testing Perl on Tru64 =item ext/ODBM_File/odbm Test Failing With Static Builds =item Perl Fails Because Of Unresolved Symbol sockatmark =item read_cur_obj_info: bad file magic number =item AUTHOR =back =head2 perlvms - VMS-specific documentation for Perl =over 4 =item DESCRIPTION =item Installation =item Organization of Perl Images =over 4 =item Core Images =item Perl Extensions =item Installing static extensions =item Installing dynamic extensions =back =item File specifications =over 4 =item Syntax =item Filename Case =item Symbolic Links =item Wildcard expansion =item Pipes =back =item PERL5LIB and PERLLIB =item The Perl Forked Debugger =item PERL_VMS_EXCEPTION_DEBUG =item Command line =over 4 =item I/O redirection and backgrounding =item Command line switches -i, -S, -u =back =item Perl functions File tests, backticks, binmode FILEHANDLE, crypt PLAINTEXT, USER, die, dump, exec LIST, fork, getpwent, getpwnam, getpwuid, gmtime, kill, qx//, select (system call), stat EXPR, system LIST, time, times, unlink LIST, utime LIST, waitpid PID,FLAGS =item Perl variables %ENV, CRTL_ENV, CLISYM_[LOCAL], Any other string, $!, $^E, $?, $| =item Standard modules with VMS-specific differences =over 4 =item SDBM_File =back =item Revision date =item AUTHOR =back =head2 perlvos - Perl for Stratus OpenVOS =over 4 =item SYNOPSIS =item BUILDING PERL FOR OPENVOS =item INSTALLING PERL IN OPENVOS =item USING PERL IN OPENVOS =over 4 =item Restrictions of Perl on OpenVOS =back =item TEST STATUS =item SUPPORT STATUS =item AUTHOR =item LAST UPDATE =back =head2 perlwin32 - Perl under Windows =over 4 =item SYNOPSIS =item DESCRIPTION L<http://mingw.org>, L<http://mingw-w64.org> =over 4 =item Setting Up Perl on Windows Make, Command Shell, Microsoft Visual C++, Microsoft Visual C++ 2008-2019 Express/Community Edition, Microsoft Visual C++ 2005 Express Edition, Microsoft Visual C++ Toolkit 2003, Microsoft Platform SDK 64-bit Compiler, GCC, Intel C++ Compiler =item Building =item Testing Perl on Windows =item Installation of Perl on Windows =item Usage Hints for Perl on Windows Environment Variables, File Globbing, Using perl from the command line, Building Extensions, Command-line Wildcard Expansion, Notes on 64-bit Windows =item Running Perl Scripts =item Miscellaneous Things =back =item BUGS AND CAVEATS =item ACKNOWLEDGEMENTS =item AUTHORS Gary Ng E<lt>71564.1743@CompuServe.COME<gt>, Gurusamy Sarathy E<lt>gsar@activestate.comE<gt>, Nick Ing-Simmons E<lt>nick@ing-simmons.netE<gt>, Jan Dubois E<lt>jand@activestate.comE<gt>, Steve Hay E<lt>steve.m.hay@googlemail.comE<gt> =item SEE ALSO =item HISTORY =back =head2 perlboot - Links to information on object-oriented programming in Perl =over 4 =item DESCRIPTION =back =head2 perlbot - Links to information on object-oriented programming in Perl =over 4 =item DESCRIPTION =back =head2 perlrepository - Links to current information on the Perl source repository =over 4 =item DESCRIPTION =back =head2 perltodo - Link to the Perl to-do list =over 4 =item DESCRIPTION =back =head2 perltooc - Links to information on object-oriented programming in Perl =over 4 =item DESCRIPTION =back =head2 perltoot - Links to information on object-oriented programming in Perl =over 4 =item DESCRIPTION =back =head1 PRAGMA DOCUMENTATION =head2 attributes - get/set subroutine or variable attributes =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item What C<import> does =item Built-in Attributes lvalue, method, prototype(..), const, shared =item Available Subroutines get, reftype =item Package-specific Attribute Handling FETCH_I<type>_ATTRIBUTES, MODIFY_I<type>_ATTRIBUTES =item Syntax of Attribute Lists =back =item EXPORTS =over 4 =item Default exports =item Available exports =item Export tags defined =back =item EXAMPLES =item MORE EXAMPLES =item SEE ALSO =back =head2 autodie - Replace functions with ones that succeed or die with lexical scope =over 4 =item SYNOPSIS =item DESCRIPTION =item EXCEPTIONS =item CATEGORIES =item FUNCTION SPECIFIC NOTES =over 4 =item print =item flock =item system/exec =back =item GOTCHAS =item DIAGNOSTICS :void cannot be used with lexical scope, No user hints defined for %s =item Tips and Tricks =over 4 =item Importing autodie into another namespace than "caller" =back =item BUGS =over 4 =item autodie and string eval =item REPORTING BUGS =back =item FEEDBACK =item AUTHOR =item LICENSE =item SEE ALSO =item ACKNOWLEDGEMENTS =back =head2 autodie::Scope::Guard - Wrapper class for calling subs at end of scope =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Methods =back =item AUTHOR =item LICENSE =back =head2 autodie::Scope::GuardStack - Hook stack for managing scopes via %^H =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Methods =back =item AUTHOR =item LICENSE =back =head2 autodie::Util - Internal Utility subroutines for autodie and Fatal =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Methods =back =item AUTHOR =item LICENSE =back =head2 autodie::exception - Exceptions from autodying functions. =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Common Methods =back =back =over 4 =item Advanced methods =back =over 4 =item SEE ALSO =item LICENSE =item AUTHOR =back =head2 autodie::exception::system - Exceptions from autodying system(). =over 4 =item SYNOPSIS =item DESCRIPTION =back =over 4 =item stringify =back =over 4 =item LICENSE =item AUTHOR =back =head2 autodie::hints - Provide hints about user subroutines to autodie =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Introduction =item What are hints? =item Example hints =back =item Manually setting hints from within your program =item Adding hints to your module =item Insisting on hints =back =over 4 =item Diagnostics Attempts to set_hints_for unidentifiable subroutine, fail hints cannot be provided with either scalar or list hints for %s, %s hint missing for %s =item ACKNOWLEDGEMENTS =item AUTHOR =item LICENSE =item SEE ALSO =back =head2 autodie::skip - Skip a package when throwing autodie exceptions =over 4 =item SYNPOSIS =item DESCRIPTION =item AUTHOR =item LICENSE =item SEE ALSO =back =head2 autouse - postpone load of modules until a function is used =over 4 =item SYNOPSIS =item DESCRIPTION =item WARNING =item AUTHOR =item SEE ALSO =back =head2 base - Establish an ISA relationship with base classes at compile time =over 4 =item SYNOPSIS =item DESCRIPTION =item DIAGNOSTICS Base class package "%s" is empty, Class 'Foo' tried to inherit from itself =item HISTORY =item CAVEATS =item SEE ALSO =back =head2 bigint - Transparent BigInteger support for Perl =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item use integer vs. use bigint =item Options a or accuracy, p or precision, t or trace, hex, oct, l, lib, try or only, v or version =item Math Library =item Internal Format =item Sign =item Method calls =item Methods inf(), NaN(), e, PI, bexp(), bpi(), upgrade(), in_effect() =back =item CAVEATS Operator vs literal overloading, ranges, in_effect(), hex()/oct() =item MODULES USED =item EXAMPLES =item BUGS =item SUPPORT =item LICENSE =item SEE ALSO =item AUTHORS =back =head2 bignum - Transparent BigNumber support for Perl =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Options a or accuracy, p or precision, t or trace, l or lib, hex, oct, v or version =item Methods =item Caveats inf(), NaN(), e, PI(), bexp(), bpi(), upgrade(), in_effect() =item Math Library =item INTERNAL FORMAT =item SIGN =back =item CAVEATS Operator vs literal overloading, in_effect(), hex()/oct() =item MODULES USED =item EXAMPLES =item BUGS =item SUPPORT RT: CPAN's request tracker, AnnoCPAN: Annotated CPAN documentation, CPAN Ratings, Search CPAN, CPAN Testers Matrix =item LICENSE =item SEE ALSO =item AUTHORS =back =head2 bigrat - Transparent BigNumber/BigRational support for Perl =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Modules Used =item Math Library =item Sign =item Methods inf(), NaN(), e, PI, bexp(), bpi(), upgrade(), in_effect() =item MATH LIBRARY =item Caveat =item Options a or accuracy, p or precision, t or trace, l or lib, hex, oct, v or version =back =item CAVEATS Operator vs literal overloading, in_effect(), hex()/oct() =item EXAMPLES =item BUGS =item SUPPORT =item LICENSE =item SEE ALSO =item AUTHORS =back =head2 blib - Use MakeMaker's uninstalled version of a package =over 4 =item SYNOPSIS =item DESCRIPTION =item BUGS =item AUTHOR =back =head2 bytes - Perl pragma to expose the individual bytes of characters =over 4 =item NOTICE =item SYNOPSIS =item DESCRIPTION =item LIMITATIONS =item SEE ALSO =back =head2 charnames - access to Unicode character names and named character sequences; also define character names =over 4 =item SYNOPSIS =item DESCRIPTION =item LOOSE MATCHES =item ALIASES =item CUSTOM ALIASES =item charnames::string_vianame(I<name>) =item charnames::vianame(I<name>) =item charnames::viacode(I<code>) =item CUSTOM TRANSLATORS =item BUGS =back =head2 constant - Perl pragma to declare constants =over 4 =item SYNOPSIS =item DESCRIPTION =item NOTES =over 4 =item List constants =item Defining multiple constants at once =item Magic constants =back =item TECHNICAL NOTES =item CAVEATS =item SEE ALSO =item BUGS =item AUTHORS =item COPYRIGHT & LICENSE =back =head2 deprecate - Perl pragma for deprecating the inclusion of a module in core =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Important Caveat =back =item EXPORT =item SEE ALSO =item AUTHOR =item COPYRIGHT AND LICENSE =back =head2 diagnostics, splain - produce verbose warning diagnostics =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item The C<diagnostics> Pragma =item The I<splain> Program =back =item EXAMPLES =item INTERNALS =item BUGS =item AUTHOR =back =head2 encoding - allows you to write your script in non-ASCII and non-UTF-8 =over 4 =item WARNING =item SYNOPSIS =item DESCRIPTION C<use encoding ['I<ENCNAME>'] ;>, C<use encoding I<ENCNAME>, Filter=E<gt>1;>, C<no encoding;> =item OPTIONS =over 4 =item Setting C<STDIN> and/or C<STDOUT> individually =item The C<:locale> sub-pragma =back =item CAVEATS =over 4 =item SIDE EFFECTS =item DO NOT MIX MULTIPLE ENCODINGS =item Prior to Perl v5.22 =item Prior to Encode version 1.87 =item Prior to Perl v5.8.1 "NON-EUC" doublebyte encodings, C<tr///>, Legend of characters above =back =item EXAMPLE - Greekperl =item BUGS Thread safety, Can't be used by more than one module in a single program, Other modules using C<STDIN> and C<STDOUT> get the encoded stream, literals in regex that are longer than 127 bytes, EBCDIC, C<format>, See also L</CAVEATS> =item HISTORY =item SEE ALSO =back =head2 encoding::warnings - Warn on implicit encoding conversions =over 4 =item VERSION =item NOTICE =item SYNOPSIS =item DESCRIPTION =over 4 =item Overview of the problem =item Detecting the problem =item Solving the problem Upgrade both sides to unicode-strings, Downgrade both sides to byte-strings, Specify the encoding for implicit byte-string upgrading, PerlIO layers for B<STDIN> and B<STDOUT>, Literal conversions, Implicit upgrading for byte-strings =back =item CAVEATS =back =over 4 =item SEE ALSO =item AUTHORS =item COPYRIGHT =back =head2 experimental - Experimental features made easy =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION C<array_base> - allow the use of C<$[> to change the starting index of C<@array>, C<autoderef> - allow push, each, keys, and other built-ins on references, C<bitwise> - allow the new stringwise bit operators, C<const_attr> - allow the :const attribute on subs, C<lexical_topic> - allow the use of lexical C<$_> via C<my $_>, C<lexical_subs> - allow the use of lexical subroutines, C<postderef> - allow the use of postfix dereferencing expressions, including in interpolating strings, C<re_strict> - enables strict mode in regular expressions, C<refaliasing> - allow aliasing via C<\$x = \$y>, C<regex_sets> - allow extended bracketed character classes in regexps, C<signatures> - allow subroutine signatures (for named arguments), C<smartmatch> - allow the use of C<~~>, C<switch> - allow the use of C<~~>, given, and when, C<win32_perlio> - allows the use of the :win32 IO layer =over 4 =item Ordering matters =item Disclaimer =back =item SEE ALSO =item AUTHOR =item COPYRIGHT AND LICENSE =back =head2 feature - Perl pragma to enable new features =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Lexical effect =item C<no feature> =back =item AVAILABLE FEATURES =over 4 =item The 'say' feature =item The 'state' feature =item The 'switch' feature =item The 'unicode_strings' feature =item The 'unicode_eval' and 'evalbytes' features =item The 'current_sub' feature =item The 'array_base' feature =item The 'fc' feature =item The 'lexical_subs' feature =item The 'postderef' and 'postderef_qq' features =item The 'signatures' feature =item The 'refaliasing' feature =item The 'bitwise' feature =item The 'declared_refs' feature =item The 'isa' feature =item The 'indirect' feature =back =item FEATURE BUNDLES =item IMPLICIT LOADING =back =head2 fields - compile-time class fields =over 4 =item SYNOPSIS =item DESCRIPTION new, phash =item SEE ALSO =back =head2 filetest - Perl pragma to control the filetest permission operators =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Consider this carefully =item The "access" sub-pragma =item Limitation with regard to C<_> =back =back =head2 if - C<use> a Perl module if a condition holds =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item C<use if> =item C<no if> =back =item BUGS =item SEE ALSO =item AUTHOR =item COPYRIGHT AND LICENCE =back =head2 integer - Perl pragma to use integer arithmetic instead of floating point =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 less - perl pragma to request less of something =over 4 =item SYNOPSIS =item DESCRIPTION =item FOR MODULE AUTHORS =over 4 =item C<< BOOLEAN = less->of( FEATURE ) >> =item C<< FEATURES = less->of() >> =back =item CAVEATS This probably does nothing, This works only on 5.10+ =back =head2 lib - manipulate @INC at compile time =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Adding directories to @INC =item Deleting directories from @INC =item Restoring original @INC =back =item CAVEATS =item NOTES =item SEE ALSO =item AUTHOR =item COPYRIGHT AND LICENSE =back =head2 locale - Perl pragma to use or avoid POSIX locales for built-in operations =over 4 =item WARNING =item SYNOPSIS =item DESCRIPTION =back =head2 mro - Method Resolution Order =over 4 =item SYNOPSIS =item DESCRIPTION =item OVERVIEW =item The C3 MRO =over 4 =item What is C3? =item How does C3 work =back =item Functions =over 4 =item mro::get_linear_isa($classname[, $type]) =item mro::set_mro ($classname, $type) =item mro::get_mro($classname) =item mro::get_isarev($classname) =item mro::is_universal($classname) =item mro::invalidate_all_method_caches() =item mro::method_changed_in($classname) =item mro::get_pkg_gen($classname) =item next::method =item next::can =item maybe::next::method =back =item SEE ALSO =over 4 =item The original Dylan paper L<http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.19.3910&rep=rep1 &type=pdf> =item Python 2.3 MRO L<https://www.python.org/download/releases/2.3/mro/> =item Class::C3 L<Class::C3> =back =item AUTHOR =back =head2 ok - Alternative to Test::More::use_ok =over 4 =item SYNOPSIS =item DESCRIPTION =item CC0 1.0 Universal =back =head2 open - perl pragma to set default PerlIO layers for input and output =over 4 =item SYNOPSIS =item DESCRIPTION =item IMPLEMENTATION DETAILS =item SEE ALSO =back =head2 ops - Perl pragma to restrict unsafe operations when compiling =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =back =head2 overload - Package for overloading Perl operations =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Fundamentals =item Overloadable Operations C<not>, C<neg>, C<++>, C<-->, I<Assignments>, I<Non-mutators with a mutator variant>, C<int>, I<String, numeric, boolean, and regexp conversions>, I<Iteration>, I<File tests>, I<Matching>, I<Dereferencing>, I<Special> =item Magic Autogeneration =item Special Keys for C<use overload> defined, but FALSE, C<undef>, TRUE =item How Perl Chooses an Operator Implementation =item Losing Overloading =item Inheritance and Overloading Method names in the C<use overload> directive, Overloading of an operation is inherited by derived classes =item Run-time Overloading =item Public Functions overload::StrVal(arg), overload::Overloaded(arg), overload::Method(obj,op) =item Overloading Constants integer, float, binary, q, qr =back =item IMPLEMENTATION =item COOKBOOK =over 4 =item Two-face Scalars =item Two-face References =item Symbolic Calculator =item I<Really> Symbolic Calculator =back =item AUTHOR =item SEE ALSO =item DIAGNOSTICS Odd number of arguments for overload::constant, '%s' is not an overloadable type, '%s' is not a code reference, overload arg '%s' is invalid =item BUGS AND PITFALLS =back =head2 overloading - perl pragma to lexically control overloading =over 4 =item SYNOPSIS =item DESCRIPTION C<no overloading>, C<no overloading @ops>, C<use overloading>, C<use overloading @ops> =back =head2 parent - Establish an ISA relationship with base classes at compile time =over 4 =item SYNOPSIS =item DESCRIPTION =item HISTORY =item CAVEATS =item SEE ALSO L<base>, L<parent::versioned> =item AUTHORS AND CONTRIBUTORS =item MAINTAINER =item LICENSE =back =head2 re - Perl pragma to alter regular expression behaviour =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item 'taint' mode =item 'eval' mode =item 'strict' mode =item '/flags' mode =item 'debug' mode =item 'Debug' mode Compile related options, COMPILE, PARSE, OPTIMISE, TRIEC, DUMP, FLAGS, TEST, Execute related options, EXECUTE, MATCH, TRIEE, INTUIT, Extra debugging options, EXTRA, BUFFERS, TRIEM, STATE, STACK, GPOS, OPTIMISEM, OFFSETS, OFFSETSDBG, DUMP_PRE_OPTIMIZE, WILDCARD, Other useful flags, ALL, All, MORE, More =item Exportable Functions is_regexp($ref), regexp_pattern($ref), regmust($ref), regname($name,$all), regnames($all), regnames_count() =back =item SEE ALSO =back =head2 sigtrap - Perl pragma to enable simple signal handling =over 4 =item SYNOPSIS =item DESCRIPTION =item OPTIONS =over 4 =item SIGNAL HANDLERS B<stack-trace>, B<die>, B<handler> I<your-handler> =item SIGNAL LISTS B<normal-signals>, B<error-signals>, B<old-interface-signals> =item OTHER B<untrapped>, B<any>, I<signal>, I<number> =back =item EXAMPLES =back =head2 sort - perl pragma to control sort() behaviour =over 4 =item SYNOPSIS =item DESCRIPTION =item CAVEATS =back =head2 strict - Perl pragma to restrict unsafe constructs =over 4 =item SYNOPSIS =item DESCRIPTION C<strict refs>, C<strict vars>, C<strict subs> =item HISTORY =back =head2 subs - Perl pragma to predeclare subroutine names =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 threads - Perl interpreter-based threads =over 4 =item VERSION =item WARNING =item SYNOPSIS =item DESCRIPTION $thr = threads->create(FUNCTION, ARGS), $thr->join(), $thr->detach(), threads->detach(), threads->self(), $thr->tid(), threads->tid(), "$thr", threads->object($tid), threads->yield(), threads->list(), threads->list(threads::all), threads->list(threads::running), threads->list(threads::joinable), $thr1->equal($thr2), async BLOCK;, $thr->error(), $thr->_handle(), threads->_handle() =item EXITING A THREAD threads->exit(), threads->exit(status), die(), exit(status), use threads 'exit' => 'threads_only', threads->create({'exit' => 'thread_only'}, ...), $thr->set_thread_exit_only(boolean), threads->set_thread_exit_only(boolean) =item THREAD STATE $thr->is_running(), $thr->is_joinable(), $thr->is_detached(), threads->is_detached() =item THREAD CONTEXT =over 4 =item Explicit context =item Implicit context =item $thr->wantarray() =item threads->wantarray() =back =item THREAD STACK SIZE threads->get_stack_size();, $size = $thr->get_stack_size();, $old_size = threads->set_stack_size($new_size);, use threads ('stack_size' => VALUE);, $ENV{'PERL5_ITHREADS_STACK_SIZE'}, threads->create({'stack_size' => VALUE}, FUNCTION, ARGS), $thr2 = $thr1->create(FUNCTION, ARGS) =item THREAD SIGNALLING $thr->kill('SIG...'); =item WARNINGS Perl exited with active threads:, Thread creation failed: pthread_create returned #, Thread # terminated abnormally: .., Using minimum thread stack size of #, Thread creation failed: pthread_attr_setstacksize(I<SIZE>) returned 22 =item ERRORS This Perl not built to support threads, Cannot change stack size of an existing thread, Cannot signal threads without safe signals, Unrecognized signal name: .. =item BUGS AND LIMITATIONS Thread-safe modules, Using non-thread-safe modules, Memory consumption, Current working directory, Locales, Environment variables, Catching signals, Parent-child threads, Unsafe signals, Perl has been built with C<PERL_OLD_SIGNALS> (see C<perl -V>), The environment variable C<PERL_SIGNALS> is set to C<unsafe> (see L<perlrun/"PERL_SIGNALS">), The module L<Perl::Unsafe::Signals> is used, Identity of objects returned from threads, Returning blessed objects from threads, END blocks in threads, Open directory handles, Detached threads and global destruction, Perl Bugs and the CPAN Version of L<threads> =item REQUIREMENTS =item SEE ALSO =item AUTHOR =item LICENSE =item ACKNOWLEDGEMENTS =back =head2 threads::shared - Perl extension for sharing data structures between threads =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item EXPORT =item FUNCTIONS share VARIABLE, shared_clone REF, is_shared VARIABLE, lock VARIABLE, cond_wait VARIABLE, cond_wait CONDVAR, LOCKVAR, cond_timedwait VARIABLE, ABS_TIMEOUT, cond_timedwait CONDVAR, ABS_TIMEOUT, LOCKVAR, cond_signal VARIABLE, cond_broadcast VARIABLE =item OBJECTS =item NOTES =item WARNINGS cond_broadcast() called on unlocked variable, cond_signal() called on unlocked variable =item BUGS AND LIMITATIONS =item SEE ALSO =item AUTHOR =item LICENSE =back =head2 utf8 - Perl pragma to enable/disable UTF-8 (or UTF-EBCDIC) in source code =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Utility functions C<$num_octets = utf8::upgrade($string)>, C<$success = utf8::downgrade($string[, $fail_ok])>, C<utf8::encode($string)>, C<$success = utf8::decode($string)>, C<$unicode = utf8::native_to_unicode($code_point)>, C<$native = utf8::unicode_to_native($code_point)>, C<$flag = utf8::is_utf8($string)>, C<$flag = utf8::valid($string)> =back =item BUGS =item SEE ALSO =back =head2 vars - Perl pragma to predeclare global variable names =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 version - Perl extension for Version Objects =over 4 =item SYNOPSIS =item DESCRIPTION =item TYPES OF VERSION OBJECTS Decimal Versions, Dotted Decimal Versions =item DECLARING VERSIONS =over 4 =item How to convert a module from decimal to dotted-decimal =item How to C<declare()> a dotted-decimal version =back =item PARSING AND COMPARING VERSIONS =over 4 =item How to C<parse()> a version =item How to check for a legal version string C<is_lax()>, C<is_strict()> =item How to compare version objects =back =item OBJECT METHODS =over 4 =item is_alpha() =item is_qv() =item normal() =item numify() =item stringify() =back =item EXPORTED FUNCTIONS =over 4 =item qv() =item is_lax() =item is_strict() =back =item AUTHOR =item SEE ALSO =back =head2 version::Internals - Perl extension for Version Objects =over 4 =item DESCRIPTION =item WHAT IS A VERSION? Decimal versions, Dotted-Decimal versions =over 4 =item Decimal Versions =item Dotted-Decimal Versions =item Alpha Versions =item Regular Expressions for Version Parsing C<$version::LAX>, C<$version::STRICT>, v1.234.5 =back =item IMPLEMENTATION DETAILS =over 4 =item Equivalence between Decimal and Dotted-Decimal Versions =item Quoting Rules =item What about v-strings? =item Version Object Internals original, qv, alpha, version =item Replacement UNIVERSAL::VERSION =back =item USAGE DETAILS =over 4 =item Using modules that use version.pm Decimal versions always work, Dotted-Decimal version work sometimes =item Object Methods new(), qv(), Normal Form, Numification, Stringification, Comparison operators, Logical Operators =back =item AUTHOR =item SEE ALSO =back =head2 vmsish - Perl pragma to control VMS-specific language features =over 4 =item SYNOPSIS =item DESCRIPTION C<vmsish status>, C<vmsish exit>, C<vmsish time>, C<vmsish hushed> =back =head2 warnings - Perl pragma to control optional warnings =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Default Warnings and Optional Warnings =item What's wrong with B<-w> and C<$^W> =item Controlling Warnings from the Command Line B<-w> X<-w>, B<-W> X<-W>, B<-X> X<-X> =item Backward Compatibility =item Category Hierarchy X<warning, categories> =item Fatal Warnings X<warning, fatal> =item Reporting Warnings from a Module X<warning, reporting> X<warning, registering> =back =item FUNCTIONS use warnings::register, warnings::enabled(), warnings::enabled($category), warnings::enabled($object), warnings::enabled_at_level($category, $level), warnings::fatal_enabled(), warnings::fatal_enabled($category), warnings::fatal_enabled($object), warnings::fatal_enabled_at_level($category, $level), warnings::warn($message), warnings::warn($category, $message), warnings::warn($object, $message), warnings::warn_at_level($category, $level, $message), warnings::warnif($message), warnings::warnif($category, $message), warnings::warnif($object, $message), warnings::warnif_at_level($category, $level, $message), warnings::register_categories(@names) =back =head2 warnings::register - warnings import function =over 4 =item SYNOPSIS =item DESCRIPTION =back =head1 MODULE DOCUMENTATION =head2 AnyDBM_File - provide framework for multiple DBMs =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item DBM Comparisons [0], [1], [2], [3] =back =item SEE ALSO =back =head2 App::Cpan - easily interact with CPAN from the command line =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Options -a, -A module [ module ... ], -c module, -C module [ module ... ], -D module [ module ... ], -f, -F, -g module [ module ... ], -G module [ module ... ], -h, -i module [ module ... ], -I, -j Config.pm, -J, -l, -L author [ author ... ], -m, -M mirror1,mirror2,.., -n, -O, -p, -P, -r, -s, -t module [ module ... ], -T, -u, -v, -V, -w, -x module [ module ... ], -I<X> =item Examples =item Environment variables NONINTERACTIVE_TESTING, PERL_MM_USE_DEFAULT, CPAN_OPTS, CPANSCRIPT_LOGLEVEL, GIT_COMMAND =item Methods =back =back run() =over 4 =item EXIT VALUES =item TO DO =item BUGS =item SEE ALSO =item SOURCE AVAILABILITY =item CREDITS =item AUTHOR =item COPYRIGHT =back =head2 App::Prove - Implements the C<prove> command. =over 4 =item VERSION =back =over 4 =item DESCRIPTION =item SYNOPSIS =back =over 4 =item METHODS =over 4 =item Class Methods =back =back =over 4 =item Attributes C<archive>, C<argv>, C<backwards>, C<blib>, C<color>, C<directives>, C<dry>, C<exec>, C<extensions>, C<failures>, C<comments>, C<formatter>, C<harness>, C<ignore_exit>, C<includes>, C<jobs>, C<lib>, C<merge>, C<modules>, C<parse>, C<plugins>, C<quiet>, C<really_quiet>, C<recurse>, C<rules>, C<show_count>, C<show_help>, C<show_man>, C<show_version>, C<shuffle>, C<state>, C<state_class>, C<taint_fail>, C<taint_warn>, C<test_args>, C<timer>, C<verbose>, C<warnings_fail>, C<warnings_warn>, C<tapversion>, C<trap> =back =over 4 =item PLUGINS =over 4 =item Sample Plugin =back =item SEE ALSO =back =head2 App::Prove::State - State storage for the C<prove> command. =over 4 =item VERSION =back =over 4 =item DESCRIPTION =item SYNOPSIS =back =over 4 =item METHODS =over 4 =item Class Methods C<store>, C<extensions> (optional), C<result_class> (optional) =back =back =over 4 =item C<result_class> =back =over 4 =item C<extensions> =back =over 4 =item C<results> =back =over 4 =item C<commit> =back =over 4 =item Instance Methods C<last>, C<failed>, C<passed>, C<all>, C<hot>, C<todo>, C<slow>, C<fast>, C<new>, C<old>, C<save> =back =head2 App::Prove::State::Result - Individual test suite results. =over 4 =item VERSION =back =over 4 =item DESCRIPTION =item SYNOPSIS =back =over 4 =item METHODS =over 4 =item Class Methods =back =back =over 4 =item C<state_version> =back =over 4 =item C<test_class> =back =head2 App::Prove::State::Result::Test - Individual test results. =over 4 =item VERSION =back =over 4 =item DESCRIPTION =item SYNOPSIS =back =over 4 =item METHODS =over 4 =item Class Methods =back =back =over 4 =item Instance Methods =back =head2 Archive::Tar - module for manipulations of tar archives =over 4 =item SYNOPSIS =item DESCRIPTION =item Object Methods =over 4 =item Archive::Tar->new( [$file, $compressed] ) =back =back =over 4 =item $tar->read ( $filename|$handle, [$compressed, {opt => 'val'}] ) limit, filter, md5, extract =back =over 4 =item $tar->contains_file( $filename ) =back =over 4 =item $tar->extract( [@filenames] ) =back =over 4 =item $tar->extract_file( $file, [$extract_path] ) =back =over 4 =item $tar->list_files( [\@properties] ) =back =over 4 =item $tar->get_files( [@filenames] ) =back =over 4 =item $tar->get_content( $file ) =back =over 4 =item $tar->replace_content( $file, $content ) =back =over 4 =item $tar->rename( $file, $new_name ) =back =over 4 =item $tar->chmod( $file, $mode ) =back =over 4 =item $tar->chown( $file, $uname [, $gname] ) =back =over 4 =item $tar->remove (@filenamelist) =back =over 4 =item $tar->clear =back =over 4 =item $tar->write ( [$file, $compressed, $prefix] ) =back =over 4 =item $tar->add_files( @filenamelist ) =back =over 4 =item $tar->add_data ( $filename, $data, [$opthashref] ) FILE, HARDLINK, SYMLINK, CHARDEV, BLOCKDEV, DIR, FIFO, SOCKET =back =over 4 =item $tar->error( [$BOOL] ) =back =over 4 =item $tar->setcwd( $cwd ); =back =over 4 =item Class Methods =over 4 =item Archive::Tar->create_archive($file, $compressed, @filelist) =back =back =over 4 =item Archive::Tar->iter( $filename, [ $compressed, {opt => $val} ] ) =back =over 4 =item Archive::Tar->list_archive($file, $compressed, [\@properties]) =back =over 4 =item Archive::Tar->extract_archive($file, $compressed) =back =over 4 =item $bool = Archive::Tar->has_io_string =back =over 4 =item $bool = Archive::Tar->has_perlio =back =over 4 =item $bool = Archive::Tar->has_zlib_support =back =over 4 =item $bool = Archive::Tar->has_bzip2_support =back =over 4 =item $bool = Archive::Tar->has_xz_support =back =over 4 =item Archive::Tar->can_handle_compressed_files =back =over 4 =item GLOBAL VARIABLES =over 4 =item $Archive::Tar::FOLLOW_SYMLINK =item $Archive::Tar::CHOWN =item $Archive::Tar::CHMOD =item $Archive::Tar::SAME_PERMISSIONS =item $Archive::Tar::DO_NOT_USE_PREFIX =item $Archive::Tar::DEBUG =item $Archive::Tar::WARN =item $Archive::Tar::error =item $Archive::Tar::INSECURE_EXTRACT_MODE =item $Archive::Tar::HAS_PERLIO =item $Archive::Tar::HAS_IO_STRING =item $Archive::Tar::ZERO_PAD_NUMBERS =item Tuning the way RESOLVE_SYMLINK will works =back =back =over 4 =item FAQ What's the minimum perl version required to run Archive::Tar?, Isn't Archive::Tar slow?, Isn't Archive::Tar heavier on memory than /bin/tar?, Can you lazy-load data instead?, How much memory will an X kb tar file need?, What do you do with unsupported filetypes in an archive?, I'm using WinZip, or some other non-POSIX client, and files are not being extracted properly!, How do I extract only files that have property X from an archive?, How do I access .tar.Z files?, How do I handle Unicode strings? =item CAVEATS =item TODO Check if passed in handles are open for read/write, Allow archives to be passed in as string, Facilitate processing an opened filehandle of a compressed archive =item SEE ALSO The GNU tar specification, The PAX format specification, A comparison of GNU and POSIX tar standards; C<http://www.delorie.com/gnu/docs/tar/tar_114.html>, GNU tar intends to switch to POSIX compatibility, A Comparison between various tar implementations =item AUTHOR =item ACKNOWLEDGEMENTS =item COPYRIGHT =back =head2 Archive::Tar::File - a subclass for in-memory extracted file from Archive::Tar =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Accessors name, mode, uid, gid, size, mtime, chksum, type, linkname, magic, version, uname, gname, devmajor, devminor, prefix, raw =back =item Methods =over 4 =item Archive::Tar::File->new( file => $path ) =item Archive::Tar::File->new( data => $path, $data, $opt ) =item Archive::Tar::File->new( chunk => $chunk ) =back =back =over 4 =item $bool = $file->extract( [ $alternative_name ] ) =back =over 4 =item $path = $file->full_path =back =over 4 =item $bool = $file->validate =back =over 4 =item $bool = $file->has_content =back =over 4 =item $content = $file->get_content =back =over 4 =item $cref = $file->get_content_by_ref =back =over 4 =item $bool = $file->replace_content( $content ) =back =over 4 =item $bool = $file->rename( $new_name ) =back =over 4 =item $bool = $file->chmod $mode) =back =over 4 =item $bool = $file->chown( $user [, $group]) =back =over 4 =item Convenience methods $file->is_file, $file->is_dir, $file->is_hardlink, $file->is_symlink, $file->is_chardev, $file->is_blockdev, $file->is_fifo, $file->is_socket, $file->is_longlink, $file->is_label, $file->is_unknown =back =head2 Attribute::Handlers - Simpler definition of attribute handlers =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION [0], [1], [2], [3], [4], [5], [6], [7] =over 4 =item Typed lexicals =item Type-specific attribute handlers =item Non-interpretive attribute handlers =item Phase-specific attribute handlers =item Attributes as C<tie> interfaces =back =item EXAMPLES =item UTILITY FUNCTIONS findsym =item DIAGNOSTICS C<Bad attribute type: ATTR(%s)>, C<Attribute handler %s doesn't handle %s attributes>, C<Declaration of %s attribute in package %s may clash with future reserved word>, C<Can't have two ATTR specifiers on one subroutine>, C<Can't autotie a %s>, C<Internal error: %s symbol went missing>, C<Won't be able to apply END handler> =item AUTHOR =item BUGS =item COPYRIGHT AND LICENSE =back =head2 AutoLoader - load subroutines only on demand =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Subroutine Stubs =item Using B<AutoLoader>'s AUTOLOAD Subroutine =item Overriding B<AutoLoader>'s AUTOLOAD Subroutine =item Package Lexicals =item Not Using AutoLoader =item B<AutoLoader> vs. B<SelfLoader> =item Forcing AutoLoader to Load a Function =back =item CAVEATS =item SEE ALSO =item AUTHOR =item COPYRIGHT AND LICENSE =back =head2 AutoSplit - split a package for autoloading =over 4 =item SYNOPSIS =item DESCRIPTION $keep, $check, $modtime =over 4 =item Multiple packages =back =item DIAGNOSTICS =item AUTHOR =item COPYRIGHT AND LICENSE =back =head2 B - The Perl Compiler Backend =over 4 =item SYNOPSIS =item DESCRIPTION =item OVERVIEW =item Utility Functions =over 4 =item Functions Returning C<B::SV>, C<B::AV>, C<B::HV>, and C<B::CV> objects sv_undef, sv_yes, sv_no, svref_2object(SVREF), amagic_generation, init_av, check_av, unitcheck_av, begin_av, end_av, comppadlist, regex_padav, main_cv =item Functions for Examining the Symbol Table walksymtable(SYMREF, METHOD, RECURSE, PREFIX) =item Functions Returning C<B::OP> objects or for walking op trees main_root, main_start, walkoptree(OP, METHOD), walkoptree_debug(DEBUG) =item Miscellaneous Utility Functions ppname(OPNUM), hash(STR), cast_I32(I), minus_c, cstring(STR), perlstring(STR), safename(STR), class(OBJ), threadsv_names =item Exported utility variables @optype, @specialsv_name =back =item OVERVIEW OF CLASSES =over 4 =item SV-RELATED CLASSES =item B::SV Methods REFCNT, FLAGS, object_2svref =item B::IV Methods IV, IVX, UVX, int_value, needs64bits, packiv =item B::NV Methods NV, NVX, COP_SEQ_RANGE_LOW, COP_SEQ_RANGE_HIGH =item B::RV Methods RV =item B::PV Methods PV, RV, PVX, CUR, LEN =item B::PVMG Methods MAGIC, SvSTASH =item B::MAGIC Methods MOREMAGIC, precomp, PRIVATE, TYPE, FLAGS, OBJ, PTR, REGEX =item B::PVLV Methods TARGOFF, TARGLEN, TYPE, TARG =item B::BM Methods USEFUL, PREVIOUS, RARE, TABLE =item B::REGEXP Methods REGEX, precomp, qr_anoncv, compflags =item B::GV Methods is_empty, NAME, SAFENAME, STASH, SV, IO, FORM, AV, HV, EGV, CV, CVGEN, LINE, FILE, FILEGV, GvREFCNT, FLAGS, GPFLAGS =item B::IO Methods LINES, PAGE, PAGE_LEN, LINES_LEFT, TOP_NAME, TOP_GV, FMT_NAME, FMT_GV, BOTTOM_NAME, BOTTOM_GV, SUBPROCESS, IoTYPE, IoFLAGS, IsSTD =item B::AV Methods FILL, MAX, ARRAY, ARRAYelt =item B::CV Methods STASH, START, ROOT, GV, FILE, DEPTH, PADLIST, OUTSIDE, OUTSIDE_SEQ, XSUB, XSUBANY, CvFLAGS, const_sv, NAME_HEK =item B::HV Methods FILL, MAX, KEYS, RITER, NAME, ARRAY =item OP-RELATED CLASSES =item B::OP Methods next, sibling, parent, name, ppaddr, desc, targ, type, opt, flags, private, spare =item B::UNOP Method first =item B::UNOP_AUX Methods (since 5.22) aux_list(cv), string(cv) =item B::BINOP Method last =item B::LOGOP Method other =item B::LISTOP Method children =item B::PMOP Methods pmreplroot, pmreplstart, pmflags, precomp, pmoffset, code_list, pmregexp =item B::SVOP Methods sv, gv =item B::PADOP Method padix =item B::PVOP Method pv =item B::LOOP Methods redoop, nextop, lastop =item B::COP Methods label, stash, stashpv, stashoff (threaded only), file, cop_seq, line, warnings, io, hints, hints_hash =item B::METHOP Methods (Since Perl 5.22) first, meth_sv =item PAD-RELATED CLASSES =item B::PADLIST Methods MAX, ARRAY, ARRAYelt, NAMES, REFCNT, id, outid =item B::PADNAMELIST Methods MAX, ARRAY, ARRAYelt, REFCNT =item B::PADNAME Methods PV, PVX, LEN, REFCNT, FLAGS, TYPE, SvSTASH, OURSTASH, PROTOCV, COP_SEQ_RANGE_LOW, COP_SEQ_RANGE_HIGH, PARENT_PAD_INDEX, PARENT_FAKELEX_FLAGS =item $B::overlay =back =item AUTHOR =back =head2 B::Concise - Walk Perl syntax tree, printing concise info about ops =over 4 =item SYNOPSIS =item DESCRIPTION =item EXAMPLE =item OPTIONS =over 4 =item Options for Opcode Ordering B<-basic>, B<-exec>, B<-tree> =item Options for Line-Style B<-concise>, B<-terse>, B<-linenoise>, B<-debug>, B<-env> =item Options for tree-specific formatting B<-compact>, B<-loose>, B<-vt>, B<-ascii> =item Options controlling sequence numbering B<-base>I<n>, B<-bigendian>, B<-littleendian> =item Other options B<-src>, B<-stash="somepackage">, B<-main>, B<-nomain>, B<-nobanner>, B<-banner>, B<-banneris> => subref =item Option Stickiness =back =item ABBREVIATIONS =over 4 =item OP class abbreviations =item OP flags abbreviations =back =item FORMATTING SPECIFICATIONS =over 4 =item Special Patterns B<(x(>I<exec_text>B<;>I<basic_text>B<)x)>, B<(*(>I<text>B<)*)>, B<(*(>I<text1>B<;>I<text2>B<)*)>, B<(?(>I<text1>B<#>I<var>I<Text2>B<)?)>, B<~> =item # Variables B<#>I<var>, B<#>I<var>I<N>, B<#>I<Var>, B<#addr>, B<#arg>, B<#class>, B<#classsym>, B<#coplabel>, B<#exname>, B<#extarg>, B<#firstaddr>, B<#flags>, B<#flagval>, B<#hints>, B<#hintsval>, B<#hyphseq>, B<#label>, B<#lastaddr>, B<#name>, B<#NAME>, B<#next>, B<#nextaddr>, B<#noise>, B<#private>, B<#privval>, B<#seq>, B<#opt>, B<#sibaddr>, B<#svaddr>, B<#svclass>, B<#svval>, B<#targ>, B<#targarg>, B<#targarglife>, B<#typenum> =back =item One-Liner Command tips perl -MO=Concise,bar foo.pl, perl -MDigest::MD5=md5 -MO=Concise,md5 -e1, perl -MPOSIX -MO=Concise,_POSIX_ARG_MAX -e1, perl -MPOSIX -MO=Concise,a -e 'print _POSIX_SAVED_IDS', perl -MPOSIX -MO=Concise,a -e 'sub a{_POSIX_SAVED_IDS}', perl -MB::Concise -e 'B::Concise::compile("-exec","-src", \%B::Concise::)->()' =item Using B::Concise outside of the O framework =over 4 =item Example: Altering Concise Renderings =item set_style() =item set_style_standard($name) =item add_style () =item add_callback () =item Running B::Concise::compile() =item B::Concise::reset_sequence() =item Errors =back =item AUTHOR =back =head2 B::Deparse - Perl compiler backend to produce perl code =over 4 =item SYNOPSIS =item DESCRIPTION =item OPTIONS B<-d>, B<-f>I<FILE>, B<-l>, B<-p>, B<-P>, B<-q>, B<-s>I<LETTERS>, B<C>, B<i>I<NUMBER>, B<T>, B<v>I<STRING>B<.>, B<-x>I<LEVEL> =item USING B::Deparse AS A MODULE =over 4 =item Synopsis =item Description =item new =item ambient_pragmas strict, $[, bytes, utf8, integer, re, warnings, hint_bits, warning_bits, %^H =item coderef2text =back =item BUGS =item AUTHOR =back =head2 B::Op_private - OP op_private flag definitions =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item C<%bits> =item C<%defines> =item C<%labels> =item C<%ops_using> =back =back =head2 B::Showlex - Show lexical variables used in functions or files =over 4 =item SYNOPSIS =item DESCRIPTION =item EXAMPLES =over 4 =item OPTIONS =back =item SEE ALSO =item TODO =item AUTHOR =back =head2 B::Terse - Walk Perl syntax tree, printing terse info about ops =over 4 =item SYNOPSIS =item DESCRIPTION =item AUTHOR =back =head2 B::Xref - Generates cross reference reports for Perl programs =over 4 =item SYNOPSIS =item DESCRIPTION i, &, s, r =item OPTIONS C<-oFILENAME>, C<-r>, C<-d>, C<-D[tO]> =item BUGS =item AUTHOR =back =head2 Benchmark - benchmark running times of Perl code =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Methods new, debug, iters =item Standard Exports timeit(COUNT, CODE), timethis ( COUNT, CODE, [ TITLE, [ STYLE ]] ), timethese ( COUNT, CODEHASHREF, [ STYLE ] ), timediff ( T1, T2 ), timestr ( TIMEDIFF, [ STYLE, [ FORMAT ] ] ) =item Optional Exports clearcache ( COUNT ), clearallcache ( ), cmpthese ( COUNT, CODEHASHREF, [ STYLE ] ), cmpthese ( RESULTSHASHREF, [ STYLE ] ), countit(TIME, CODE), disablecache ( ), enablecache ( ), timesum ( T1, T2 ) =item :hireswallclock =back =item Benchmark Object cpu_p, cpu_c, cpu_a, real, iters =item NOTES =item EXAMPLES =item INHERITANCE =item CAVEATS =item SEE ALSO =item AUTHORS =item MODIFICATION HISTORY =back =head2 CORE - Namespace for Perl's core routines =over 4 =item SYNOPSIS =item DESCRIPTION =item OVERRIDING CORE FUNCTIONS =item AUTHOR =item SEE ALSO =back =head2 CPAN - query, download and build perl modules from CPAN sites =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item CPAN::shell([$prompt, $command]) Starting Interactive Mode Searching for authors, bundles, distribution files and modules, C<get>, C<make>, C<test>, C<install>, C<clean> modules or distributions, C<readme>, C<perldoc>, C<look> module or distribution, C<ls> author, C<ls> globbing_expression, C<failed>, Persistence between sessions, The C<force> and the C<fforce> pragma, Lockfile, Signals =item CPAN::Shell =item autobundle =item hosts install_tested, is_tested =item mkmyconfig =item r [Module|/Regexp/]... =item recent ***EXPERIMENTAL COMMAND*** =item recompile =item report Bundle|Distribution|Module =item smoke ***EXPERIMENTAL COMMAND*** =item upgrade [Module|/Regexp/]... =item The four C<CPAN::*> Classes: Author, Bundle, Module, Distribution =item Integrating local directories =item Redirection =item Plugin support ***EXPERIMENTAL*** =back =item CONFIGURATION completion support, displaying some help: o conf help, displaying current values: o conf [KEY], changing of scalar values: o conf KEY VALUE, changing of list values: o conf KEY SHIFT|UNSHIFT|PUSH|POP|SPLICE|LIST, reverting to saved: o conf defaults, saving the config: o conf commit =over 4 =item Config Variables C<o conf E<lt>scalar optionE<gt>>, C<o conf E<lt>scalar optionE<gt> E<lt>valueE<gt>>, C<o conf E<lt>list optionE<gt>>, C<o conf E<lt>list optionE<gt> [shift|pop]>, C<o conf E<lt>list optionE<gt> [unshift|push|splice] E<lt>listE<gt>>, interactive editing: o conf init [MATCH|LIST] =item CPAN::anycwd($path): Note on config variable getcwd cwd, getcwd, fastcwd, getdcwd, backtickcwd =item Note on the format of the urllist parameter =item The urllist parameter has CD-ROM support =item Maintaining the urllist parameter =item The C<requires> and C<build_requires> dependency declarations =item Configuration of the allow_installing_* parameters =item Configuration for individual distributions (I<Distroprefs>) =item Filenames =item Fallback Data::Dumper and Storable =item Blueprint =item Language Specs comment [scalar], cpanconfig [hash], depends [hash] *** EXPERIMENTAL FEATURE ***, disabled [boolean], features [array] *** EXPERIMENTAL FEATURE ***, goto [string], install [hash], make [hash], match [hash], patches [array], pl [hash], test [hash] =item Processing Instructions args [array], commandline, eexpect [hash], env [hash], expect [array] =item Schema verification with C<Kwalify> =item Example Distroprefs Files =back =item PROGRAMMER'S INTERFACE expand($type,@things), expandany(@things), Programming Examples =over 4 =item Methods in the other Classes CPAN::Author::as_glimpse(), CPAN::Author::as_string(), CPAN::Author::email(), CPAN::Author::fullname(), CPAN::Author::name(), CPAN::Bundle::as_glimpse(), CPAN::Bundle::as_string(), CPAN::Bundle::clean(), CPAN::Bundle::contains(), CPAN::Bundle::force($method,@args), CPAN::Bundle::get(), CPAN::Bundle::inst_file(), CPAN::Bundle::inst_version(), CPAN::Bundle::uptodate(), CPAN::Bundle::install(), CPAN::Bundle::make(), CPAN::Bundle::readme(), CPAN::Bundle::test(), CPAN::Distribution::as_glimpse(), CPAN::Distribution::as_string(), CPAN::Distribution::author, CPAN::Distribution::pretty_id(), CPAN::Distribution::base_id(), CPAN::Distribution::clean(), CPAN::Distribution::containsmods(), CPAN::Distribution::cvs_import(), CPAN::Distribution::dir(), CPAN::Distribution::force($method,@args), CPAN::Distribution::get(), CPAN::Distribution::install(), CPAN::Distribution::isa_perl(), CPAN::Distribution::look(), CPAN::Distribution::make(), CPAN::Distribution::perldoc(), CPAN::Distribution::prefs(), CPAN::Distribution::prereq_pm(), CPAN::Distribution::readme(), CPAN::Distribution::reports(), CPAN::Distribution::read_yaml(), CPAN::Distribution::test(), CPAN::Distribution::uptodate(), CPAN::Index::force_reload(), CPAN::Index::reload(), CPAN::InfoObj::dump(), CPAN::Module::as_glimpse(), CPAN::Module::as_string(), CPAN::Module::clean(), CPAN::Module::cpan_file(), CPAN::Module::cpan_version(), CPAN::Module::cvs_import(), CPAN::Module::description(), CPAN::Module::distribution(), CPAN::Module::dslip_status(), CPAN::Module::force($method,@args), CPAN::Module::get(), CPAN::Module::inst_file(), CPAN::Module::available_file(), CPAN::Module::inst_version(), CPAN::Module::available_version(), CPAN::Module::install(), CPAN::Module::look(), CPAN::Module::make(), CPAN::Module::manpage_headline(), CPAN::Module::perldoc(), CPAN::Module::readme(), CPAN::Module::reports(), CPAN::Module::test(), CPAN::Module::uptodate(), CPAN::Module::userid() =item Cache Manager =item Bundles =back =item PREREQUISITES =item UTILITIES =over 4 =item Finding packages and VERSION =item Debugging o debug package.., o debug -package.., o debug all, o debug number =item Floppy, Zip, Offline Mode =item Basic Utilities for Programmers has_inst($module), use_inst($module), has_usable($module), instance($module), frontend(), frontend($new_frontend) =back =item SECURITY =over 4 =item Cryptographically signed modules =back =item EXPORT =item ENVIRONMENT =item POPULATE AN INSTALLATION WITH LOTS OF MODULES =item WORKING WITH CPAN.pm BEHIND FIREWALLS =over 4 =item Three basic types of firewalls http firewall, ftp firewall, One-way visibility, SOCKS, IP Masquerade =item Configuring lynx or ncftp for going through a firewall =back =item FAQ 1), 2), 3), 4), 5), 6), 7), 8), 9), 10), 11), 12), 13), 14), 15), 16), 17), 18), 19) =item COMPATIBILITY =over 4 =item OLD PERL VERSIONS =item CPANPLUS =item CPANMINUS =back =item SECURITY ADVICE =item BUGS =item AUTHOR =item LICENSE =item TRANSLATIONS =item SEE ALSO =back =head2 CPAN::API::HOWTO - a recipe book for programming with CPAN.pm =over 4 =item RECIPES =over 4 =item What distribution contains a particular module? =item What modules does a particular distribution contain? =back =item SEE ALSO =item LICENSE =item AUTHOR =back =head2 CPAN::Debug - internal debugging for CPAN.pm =over 4 =item LICENSE =back =head2 CPAN::Distroprefs -- read and match distroprefs =over 4 =item SYNOPSIS =item DESCRIPTION =item INTERFACE a CPAN::Distroprefs::Result object, C<undef>, indicating that no prefs files remain to be found =item RESULTS =over 4 =item Common =item Errors =item Successes =back =item PREFS =item LICENSE =back =head2 CPAN::FirstTime - Utility for CPAN::Config file Initialization =over 4 =item SYNOPSIS =item DESCRIPTION =back allow_installing_module_downgrades, allow_installing_outdated_dists, auto_commit, build_cache, build_dir, build_dir_reuse, build_requires_install_policy, cache_metadata, check_sigs, cleanup_after_install, colorize_output, colorize_print, colorize_warn, colorize_debug, commandnumber_in_prompt, connect_to_internet_ok, ftp_passive, ftpstats_period, ftpstats_size, getcwd, halt_on_failure, histfile, histsize, inactivity_timeout, index_expire, inhibit_startup_message, keep_source_where, load_module_verbosity, makepl_arg, make_arg, make_install_arg, make_install_make_command, mbuildpl_arg, mbuild_arg, mbuild_install_arg, mbuild_install_build_command, pager, prefer_installer, prefs_dir, prerequisites_policy, randomize_urllist, recommends_policy, scan_cache, shell, show_unparsable_versions, show_upload_date, show_zero_versions, suggests_policy, tar_verbosity, term_is_latin, term_ornaments, test_report, perl5lib_verbosity, prefer_external_tar, trust_test_report_history, urllist_ping_external, urllist_ping_verbose, use_prompt_default, use_sqlite, version_timeout, yaml_load_code, yaml_module =over 4 =item LICENSE =back =head2 CPAN::HandleConfig - internal configuration handling for CPAN.pm =over 4 =item C<< CLASS->safe_quote ITEM >> =back =over 4 =item LICENSE =back =head2 CPAN::Kwalify - Interface between CPAN.pm and Kwalify.pm =over 4 =item SYNOPSIS =item DESCRIPTION _validate($schema_name, $data, $file, $doc), yaml($schema_name) =item AUTHOR =item LICENSE =back =head2 CPAN::Meta - the distribution metadata for a CPAN dist =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item new =item create =item load_file =item load_yaml_string =item load_json_string =item load_string =item save =item meta_spec_version =item effective_prereqs =item should_index_file =item should_index_package =item features =item feature =item as_struct =item as_string =back =item STRING DATA =item LIST DATA =item MAP DATA =item CUSTOM DATA =item BUGS =item SEE ALSO =item SUPPORT =over 4 =item Bugs / Feature Requests =item Source Code =back =item AUTHORS =item CONTRIBUTORS =item COPYRIGHT AND LICENSE =back =head2 CPAN::Meta::Converter - Convert CPAN distribution metadata structures =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item new =item convert =item upgrade_fragment =back =item BUGS =item AUTHORS =item COPYRIGHT AND LICENSE =back =head2 CPAN::Meta::Feature - an optional feature provided by a CPAN distribution =over 4 =item VERSION =item DESCRIPTION =item METHODS =over 4 =item new =item identifier =item description =item prereqs =back =item BUGS =item AUTHORS =item COPYRIGHT AND LICENSE =back =head2 CPAN::Meta::History - history of CPAN Meta Spec changes =over 4 =item VERSION =item DESCRIPTION =item HISTORY =over 4 =item Version 2 =item Version 1.4 =item Version 1.3 =item Version 1.2 =item Version 1.1 =item Version 1.0 =back =item AUTHORS =item COPYRIGHT AND LICENSE =back =head2 CPAN::Meta::History::Meta_1_0 - Version 1.0 metadata specification for META.yml =over 4 =item PREFACE =item DESCRIPTION =item Format =item Fields name, version, license, perl, gpl, lgpl, artistic, bsd, open_source, unrestricted, restrictive, distribution_type, requires, recommends, build_requires, conflicts, dynamic_config, generated_by =item Related Projects DOAP =item History =back =head2 CPAN::Meta::History::Meta_1_1 - Version 1.1 metadata specification for META.yml =over 4 =item PREFACE =item DESCRIPTION =item Format =item Fields name, version, license, perl, gpl, lgpl, artistic, bsd, open_source, unrestricted, restrictive, license_uri, distribution_type, private, requires, recommends, build_requires, conflicts, dynamic_config, generated_by =over 4 =item Ingy's suggestions short_description, description, maturity, author_id, owner_id, categorization, keyword, chapter_id, URL for further information, namespaces =back =item History =back =head2 CPAN::Meta::History::Meta_1_2 - Version 1.2 metadata specification for META.yml =over 4 =item PREFACE =item SYNOPSIS =item DESCRIPTION =item FORMAT =item TERMINOLOGY distribution, module =item VERSION SPECIFICATIONS =item HEADER =item FIELDS =over 4 =item meta-spec =item name =item version =item abstract =item author =item license perl, gpl, lgpl, artistic, bsd, open_source, unrestricted, restrictive =item distribution_type =item requires =item recommends =item build_requires =item conflicts =item dynamic_config =item private =item provides =item no_index =item keywords =item resources homepage, license, bugtracker =item generated_by =back =item SEE ALSO =item HISTORY March 14, 2003 (Pi day), May 8, 2003, November 13, 2003, November 16, 2003, December 9, 2003, December 15, 2003, July 26, 2005, August 23, 2005 =back =head2 CPAN::Meta::History::Meta_1_3 - Version 1.3 metadata specification for META.yml =over 4 =item PREFACE =item SYNOPSIS =item DESCRIPTION =item FORMAT =item TERMINOLOGY distribution, module =item HEADER =item FIELDS =over 4 =item meta-spec =item name =item version =item abstract =item author =item license apache, artistic, bsd, gpl, lgpl, mit, mozilla, open_source, perl, restrictive, unrestricted =item distribution_type =item requires =item recommends =item build_requires =item conflicts =item dynamic_config =item private =item provides =item no_index =item keywords =item resources homepage, license, bugtracker =item generated_by =back =item VERSION SPECIFICATIONS =item SEE ALSO =item HISTORY March 14, 2003 (Pi day), May 8, 2003, November 13, 2003, November 16, 2003, December 9, 2003, December 15, 2003, July 26, 2005, August 23, 2005 =back =head2 CPAN::Meta::History::Meta_1_4 - Version 1.4 metadata specification for META.yml =over 4 =item PREFACE =item SYNOPSIS =item DESCRIPTION =item FORMAT =item TERMINOLOGY distribution, module =item HEADER =item FIELDS =over 4 =item meta-spec =item name =item version =item abstract =item author =item license apache, artistic, bsd, gpl, lgpl, mit, mozilla, open_source, perl, restrictive, unrestricted =item distribution_type =item requires =item recommends =item build_requires =item configure_requires =item conflicts =item dynamic_config =item private =item provides =item no_index =item keywords =item resources homepage, license, bugtracker =item generated_by =back =item VERSION SPECIFICATIONS =item SEE ALSO =item HISTORY March 14, 2003 (Pi day), May 8, 2003, November 13, 2003, November 16, 2003, December 9, 2003, December 15, 2003, July 26, 2005, August 23, 2005, June 12, 2007 =back =head2 CPAN::Meta::Merge - Merging CPAN Meta fragments =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item new =item merge(@fragments) =back =item MERGE STRATEGIES identical, set_addition, uniq_map, improvise =item AUTHORS =item COPYRIGHT AND LICENSE =back =head2 CPAN::Meta::Prereqs - a set of distribution prerequisites by phase and type =over 4 =item VERSION =item DESCRIPTION =item METHODS =over 4 =item new =item requirements_for =item phases =item types_in =item with_merged_prereqs =item merged_requirements =item as_string_hash =item is_finalized =item finalize =item clone =back =item BUGS =item AUTHORS =item COPYRIGHT AND LICENSE =back =head2 CPAN::Meta::Requirements - a set of version requirements for a CPAN dist =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item new =item add_minimum =item add_maximum =item add_exclusion =item exact_version =item add_requirements =item accepts_module =item clear_requirement =item requirements_for_module =item structured_requirements_for_module =item required_modules =item clone =item is_simple =item is_finalized =item finalize =item as_string_hash =item add_string_requirement >= 1.3, <= 1.3, != 1.3, > 1.3, < 1.3, >= 1.3, != 1.5, <= 2.0 =item from_string_hash =back =item SUPPORT =over 4 =item Bugs / Feature Requests =item Source Code =back =item AUTHORS =item CONTRIBUTORS =item COPYRIGHT AND LICENSE =back =head2 CPAN::Meta::Spec - specification for CPAN distribution metadata =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item TERMINOLOGY distribution, module, package, consumer, producer, must, should, may, etc =item DATA TYPES =over 4 =item Boolean =item String =item List =item Map =item License String =item URL =item Version =item Version Range =back =item STRUCTURE =over 4 =item REQUIRED FIELDS version, url, stable, testing, unstable =item OPTIONAL FIELDS file, directory, package, namespace, description, prereqs, file, version, homepage, license, bugtracker, repository =item DEPRECATED FIELDS =back =item VERSION NUMBERS =over 4 =item Version Formats Decimal versions, Dotted-integer versions =item Version Ranges =back =item PREREQUISITES =over 4 =item Prereq Spec configure, build, test, runtime, develop, requires, recommends, suggests, conflicts =item Merging and Resolving Prerequisites =back =item SERIALIZATION =item NOTES FOR IMPLEMENTORS =over 4 =item Extracting Version Numbers from Perl Modules =item Comparing Version Numbers =item Prerequisites for dynamically configured distributions =item Indexing distributions a la PAUSE =back =item SEE ALSO =item HISTORY =item AUTHORS =item COPYRIGHT AND LICENSE =back =head2 CPAN::Meta::Validator - validate CPAN distribution metadata structures =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item new =item is_valid =item errors =item Check Methods =item Validator Methods =back =item BUGS =item AUTHORS =item COPYRIGHT AND LICENSE =back =head2 CPAN::Meta::YAML - Read and write a subset of YAML for CPAN Meta files =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item SUPPORT =item SEE ALSO =item AUTHORS =item COPYRIGHT AND LICENSE =back =over 4 =item SYNOPSIS =item DESCRIPTION =back new( LOCAL_FILE_NAME ) continents() countries( [CONTINENTS] ) mirrors( [COUNTRIES] ) get_mirrors_by_countries( [COUNTRIES] ) get_mirrors_by_continents( [CONTINENTS] ) get_countries_by_continents( [CONTINENTS] ) default_mirror best_mirrors get_n_random_mirrors_by_continents( N, [CONTINENTS] ) get_mirrors_timings( MIRROR_LIST, SEEN, CALLBACK, %ARGS ); find_best_continents( HASH_REF ); =over 4 =item AUTHOR =item LICENSE =back =head2 CPAN::Nox - Wrapper around CPAN.pm without using any XS module =over 4 =item SYNOPSIS =item DESCRIPTION =item LICENSE =item SEE ALSO =back =head2 CPAN::Plugin - Base class for CPAN shell extensions =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Alpha Status =item How Plugins work? =back =item METHODS =over 4 =item plugin_requires =item distribution_object =item distribution =item distribution_info =item build_dir =item is_xs =back =item AUTHOR =back =head2 CPAN::Plugin::Specfile - Proof of concept implementation of a trivial CPAN::Plugin =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item OPTIONS =back =item AUTHOR =back =head2 CPAN::Queue - internal queue support for CPAN.pm =over 4 =item LICENSE =back =head2 CPAN::Tarzip - internal handling of tar archives for CPAN.pm =over 4 =item LICENSE =back =head2 CPAN::Version - utility functions to compare CPAN versions =over 4 =item SYNOPSIS =item DESCRIPTION =item LICENSE =back =head2 Carp - alternative warn and die for modules =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Forcing a Stack Trace =item Stack Trace formatting =back =item GLOBAL VARIABLES =over 4 =item $Carp::MaxEvalLen =item $Carp::MaxArgLen =item $Carp::MaxArgNums =item $Carp::Verbose =item $Carp::RefArgFormatter =item @CARP_NOT =item %Carp::Internal =item %Carp::CarpInternal =item $Carp::CarpLevel =back =item BUGS =item SEE ALSO =item CONTRIBUTING =item AUTHOR =item COPYRIGHT =item LICENSE =back =head2 Class::Struct - declare struct-like datatypes as Perl classes =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item The C<struct()> function =item Class Creation at Compile Time =item Element Types and Accessor Methods Scalar (C<'$'> or C<'*$'>), Array (C<'@'> or C<'*@'>), Hash (C<'%'> or C<'*%'>), Class (C<'Class_Name'> or C<'*Class_Name'>) =item Initializing with C<new> =back =item EXAMPLES Example 1, Example 2, Example 3 =item Author and Modification History =back =head2 Compress::Raw::Bzip2 - Low-Level Interface to bzip2 compression library =over 4 =item SYNOPSIS =item DESCRIPTION =item Compression =over 4 =item ($z, $status) = new Compress::Raw::Bzip2 $appendOutput, $blockSize100k, $workfactor; B<$appendOutput>, B<$blockSize100k>, B<$workfactor> =item $status = $bz->bzdeflate($input, $output); =item $status = $bz->bzflush($output); =item $status = $bz->bzclose($output); =item Example =back =item Uncompression =over 4 =item ($z, $status) = new Compress::Raw::Bunzip2 $appendOutput, $consumeInput, $small, $verbosity, $limitOutput; B<$appendOutput>, B<$consumeInput>, B<$small>, B<$limitOutput>, B<$verbosity> =item $status = $z->bzinflate($input, $output); =back =item Misc =over 4 =item my $version = Compress::Raw::Bzip2::bzlibversion(); =back =item Constants =item SUPPORT =item SEE ALSO =item AUTHOR =item MODIFICATION HISTORY =item COPYRIGHT AND LICENSE =back =head2 Compress::Raw::Zlib - Low-Level Interface to zlib compression library =over 4 =item SYNOPSIS =item DESCRIPTION =item Compress::Raw::Zlib::Deflate =over 4 =item B<($d, $status) = new Compress::Raw::Zlib::Deflate( [OPT] ) > B<-Level>, B<-Method>, B<-WindowBits>, B<-MemLevel>, B<-Strategy>, B<-Dictionary>, B<-Bufsize>, B<-AppendOutput>, B<-CRC32>, B<-ADLER32> =item B<$status = $d-E<gt>deflate($input, $output)> =item B<$status = $d-E<gt>flush($output [, $flush_type]) > =item B<$status = $d-E<gt>deflateReset() > =item B<$status = $d-E<gt>deflateParams([OPT])> B<-Level>, B<-Strategy>, B<-BufSize> =item B<$status = $d-E<gt>deflateTune($good_length, $max_lazy, $nice_length, $max_chain)> =item B<$d-E<gt>dict_adler()> =item B<$d-E<gt>crc32()> =item B<$d-E<gt>adler32()> =item B<$d-E<gt>msg()> =item B<$d-E<gt>total_in()> =item B<$d-E<gt>total_out()> =item B<$d-E<gt>get_Strategy()> =item B<$d-E<gt>get_Level()> =item B<$d-E<gt>get_BufSize()> =item Example =back =item Compress::Raw::Zlib::Inflate =over 4 =item B< ($i, $status) = new Compress::Raw::Zlib::Inflate( [OPT] ) > B<-WindowBits>, B<-Bufsize>, B<-Dictionary>, B<-AppendOutput>, B<-CRC32>, B<-ADLER32>, B<-ConsumeInput>, B<-LimitOutput> =item B< $status = $i-E<gt>inflate($input, $output [,$eof]) > =item B<$status = $i-E<gt>inflateSync($input)> =item B<$status = $i-E<gt>inflateReset() > =item B<$i-E<gt>dict_adler()> =item B<$i-E<gt>crc32()> =item B<$i-E<gt>adler32()> =item B<$i-E<gt>msg()> =item B<$i-E<gt>total_in()> =item B<$i-E<gt>total_out()> =item B<$d-E<gt>get_BufSize()> =item Examples =back =item CHECKSUM FUNCTIONS =item Misc =over 4 =item my $version = Compress::Raw::Zlib::zlib_version(); =item my $flags = Compress::Raw::Zlib::zlibCompileFlags(); =back =item The LimitOutput option. =item ACCESSING ZIP FILES =item FAQ =over 4 =item Compatibility with Unix compress/uncompress. =item Accessing .tar.Z files =item Zlib Library Version Support =back =item CONSTANTS =item SUPPORT =item SEE ALSO =item AUTHOR =item MODIFICATION HISTORY =item COPYRIGHT AND LICENSE =back =head2 Compress::Zlib - Interface to zlib compression library =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Notes for users of Compress::Zlib version 1 =back =item GZIP INTERFACE B<$gz = gzopen($filename, $mode)>, B<$gz = gzopen($filehandle, $mode)>, B<$bytesread = $gz-E<gt>gzread($buffer [, $size]) ;>, B<$bytesread = $gz-E<gt>gzreadline($line) ;>, B<$byteswritten = $gz-E<gt>gzwrite($buffer) ;>, B<$status = $gz-E<gt>gzflush($flush_type) ;>, B<$offset = $gz-E<gt>gztell() ;>, B<$status = $gz-E<gt>gzseek($offset, $whence) ;>, B<$gz-E<gt>gzclose>, B<$gz-E<gt>gzsetparams($level, $strategy>, B<$level>, B<$strategy>, B<$gz-E<gt>gzerror>, B<$gzerrno> =over 4 =item Examples =item Compress::Zlib::memGzip =item Compress::Zlib::memGunzip =back =item COMPRESS/UNCOMPRESS B<$dest = compress($source [, $level] ) ;>, B<$dest = uncompress($source) ;> =item Deflate Interface =over 4 =item B<($d, $status) = deflateInit( [OPT] )> B<-Level>, B<-Method>, B<-WindowBits>, B<-MemLevel>, B<-Strategy>, B<-Dictionary>, B<-Bufsize> =item B<($out, $status) = $d-E<gt>deflate($buffer)> =item B<($out, $status) = $d-E<gt>flush()> =head2 B<($out, $status) = $d-E<gt>flush($flush_type)> =item B<$status = $d-E<gt>deflateParams([OPT])> B<-Level>, B<-Strategy> =item B<$d-E<gt>dict_adler()> =item B<$d-E<gt>msg()> =item B<$d-E<gt>total_in()> =item B<$d-E<gt>total_out()> =item Example =back =item Inflate Interface =over 4 =item B<($i, $status) = inflateInit()> B<-WindowBits>, B<-Bufsize>, B<-Dictionary> =item B<($out, $status) = $i-E<gt>inflate($buffer)> =item B<$status = $i-E<gt>inflateSync($buffer)> =item B<$i-E<gt>dict_adler()> =item B<$i-E<gt>msg()> =item B<$i-E<gt>total_in()> =item B<$i-E<gt>total_out()> =item Example =back =item CHECKSUM FUNCTIONS =item Misc =over 4 =item my $version = Compress::Zlib::zlib_version(); =back =item CONSTANTS =item SUPPORT =item SEE ALSO =item AUTHOR =item MODIFICATION HISTORY =item COPYRIGHT AND LICENSE =back =head2 Config, =for comment Generated by configpm. Any changes made here will be lost! =over 4 =item SYNOPSIS =item DESCRIPTION myconfig(), config_sh(), config_re($regex), config_vars(@names), bincompat_options(), non_bincompat_options(), compile_date(), local_patches(), header_files() =item EXAMPLE =item WARNING =item GLOSSARY =back =over 4 =item _ C<_a>, C<_exe>, C<_o> =item a C<afs>, C<afsroot>, C<alignbytes>, C<aphostname>, C<api_revision>, C<api_subversion>, C<api_version>, C<api_versionstring>, C<ar>, C<archlib>, C<archlibexp>, C<archname>, C<archname64>, C<archobjs>, C<asctime_r_proto>, C<awk> =item b C<baserev>, C<bash>, C<bin>, C<bin_ELF>, C<binexp>, C<bison>, C<byacc>, C<byteorder> =item c C<c>, C<castflags>, C<cat>, C<cc>, C<cccdlflags>, C<ccdlflags>, C<ccflags>, C<ccflags_uselargefiles>, C<ccname>, C<ccsymbols>, C<ccversion>, C<cf_by>, C<cf_email>, C<cf_time>, C<charbits>, C<charsize>, C<chgrp>, C<chmod>, C<chown>, C<clocktype>, C<comm>, C<compress>, C<config_arg0>, C<config_argc>, C<config_args>, C<contains>, C<cp>, C<cpio>, C<cpp>, C<cpp_stuff>, C<cppccsymbols>, C<cppflags>, C<cpplast>, C<cppminus>, C<cpprun>, C<cppstdin>, C<cppsymbols>, C<crypt_r_proto>, C<cryptlib>, C<csh>, C<ctermid_r_proto>, C<ctime_r_proto> =item d C<d__fwalk>, C<d_accept4>, C<d_access>, C<d_accessx>, C<d_acosh>, C<d_aintl>, C<d_alarm>, C<d_archlib>, C<d_asctime64>, C<d_asctime_r>, C<d_asinh>, C<d_atanh>, C<d_atolf>, C<d_atoll>, C<d_attribute_deprecated>, C<d_attribute_format>, C<d_attribute_malloc>, C<d_attribute_nonnull>, C<d_attribute_noreturn>, C<d_attribute_pure>, C<d_attribute_unused>, C<d_attribute_warn_unused_result>, C<d_backtrace>, C<d_bsd>, C<d_bsdgetpgrp>, C<d_bsdsetpgrp>, C<d_builtin_add_overflow>, C<d_builtin_choose_expr>, C<d_builtin_expect>, C<d_builtin_mul_overflow>, C<d_builtin_sub_overflow>, C<d_c99_variadic_macros>, C<d_casti32>, C<d_castneg>, C<d_cbrt>, C<d_chown>, C<d_chroot>, C<d_chsize>, C<d_class>, C<d_clearenv>, C<d_closedir>, C<d_cmsghdr_s>, C<d_copysign>, C<d_copysignl>, C<d_cplusplus>, C<d_crypt>, C<d_crypt_r>, C<d_csh>, C<d_ctermid>, C<d_ctermid_r>, C<d_ctime64>, C<d_ctime_r>, C<d_cuserid>, C<d_dbminitproto>, C<d_difftime>, C<d_difftime64>, C<d_dir_dd_fd>, C<d_dirfd>, C<d_dirnamlen>, C<d_dladdr>, C<d_dlerror>, C<d_dlopen>, C<d_dlsymun>, C<d_dosuid>, C<d_double_has_inf>, C<d_double_has_nan>, C<d_double_has_negative_zero>, C<d_double_has_subnormals>, C<d_double_style_cray>, C<d_double_style_ibm>, C<d_double_style_ieee>, C<d_double_style_vax>, C<d_drand48_r>, C<d_drand48proto>, C<d_dup2>, C<d_dup3>, C<d_duplocale>, C<d_eaccess>, C<d_endgrent>, C<d_endgrent_r>, C<d_endhent>, C<d_endhostent_r>, C<d_endnent>, C<d_endnetent_r>, C<d_endpent>, C<d_endprotoent_r>, C<d_endpwent>, C<d_endpwent_r>, C<d_endsent>, C<d_endservent_r>, C<d_eofnblk>, C<d_erf>, C<d_erfc>, C<d_eunice>, C<d_exp2>, C<d_expm1>, C<d_faststdio>, C<d_fchdir>, C<d_fchmod>, C<d_fchmodat>, C<d_fchown>, C<d_fcntl>, C<d_fcntl_can_lock>, C<d_fd_macros>, C<d_fd_set>, C<d_fdclose>, C<d_fdim>, C<d_fds_bits>, C<d_fegetround>, C<d_fgetpos>, C<d_finite>, C<d_finitel>, C<d_flexfnam>, C<d_flock>, C<d_flockproto>, C<d_fma>, C<d_fmax>, C<d_fmin>, C<d_fdopendir>, C<d_fork>, C<d_fp_class>, C<d_fp_classify>, C<d_fp_classl>, C<d_fpathconf>, C<d_fpclass>, C<d_fpclassify>, C<d_fpclassl>, C<d_fpgetround>, C<d_fpos64_t>, C<d_freelocale>, C<d_frexpl>, C<d_fs_data_s>, C<d_fseeko>, C<d_fsetpos>, C<d_fstatfs>, C<d_fstatvfs>, C<d_fsync>, C<d_ftello>, C<d_ftime>, C<d_futimes>, C<d_gai_strerror>, C<d_Gconvert>, C<d_gdbm_ndbm_h_uses_prototypes>, C<d_gdbmndbm_h_uses_prototypes>, C<d_getaddrinfo>, C<d_getcwd>, C<d_getespwnam>, C<d_getfsstat>, C<d_getgrent>, C<d_getgrent_r>, C<d_getgrgid_r>, C<d_getgrnam_r>, C<d_getgrps>, C<d_gethbyaddr>, C<d_gethbyname>, C<d_gethent>, C<d_gethname>, C<d_gethostbyaddr_r>, C<d_gethostbyname_r>, C<d_gethostent_r>, C<d_gethostprotos>, C<d_getitimer>, C<d_getlogin>, C<d_getlogin_r>, C<d_getmnt>, C<d_getmntent>, C<d_getnameinfo>, C<d_getnbyaddr>, C<d_getnbyname>, C<d_getnent>, C<d_getnetbyaddr_r>, C<d_getnetbyname_r>, C<d_getnetent_r>, C<d_getnetprotos>, C<d_getpagsz>, C<d_getpbyname>, C<d_getpbynumber>, C<d_getpent>, C<d_getpgid>, C<d_getpgrp>, C<d_getpgrp2>, C<d_getppid>, C<d_getprior>, C<d_getprotobyname_r>, C<d_getprotobynumber_r>, C<d_getprotoent_r>, C<d_getprotoprotos>, C<d_getprpwnam>, C<d_getpwent>, C<d_getpwent_r>, C<d_getpwnam_r>, C<d_getpwuid_r>, C<d_getsbyname>, C<d_getsbyport>, C<d_getsent>, C<d_getservbyname_r>, C<d_getservbyport_r>, C<d_getservent_r>, C<d_getservprotos>, C<d_getspnam>, C<d_getspnam_r>, C<d_gettimeod>, C<d_gmtime64>, C<d_gmtime_r>, C<d_gnulibc>, C<d_grpasswd>, C<d_has_C_UTF8>, C<d_hasmntopt>, C<d_htonl>, C<d_hypot>, C<d_ilogb>, C<d_ilogbl>, C<d_inc_version_list>, C<d_inetaton>, C<d_inetntop>, C<d_inetpton>, C<d_int64_t>, C<d_ip_mreq>, C<d_ip_mreq_source>, C<d_ipv6_mreq>, C<d_ipv6_mreq_source>, C<d_isascii>, C<d_isblank>, C<d_isfinite>, C<d_isfinitel>, C<d_isinf>, C<d_isinfl>, C<d_isless>, C<d_isnan>, C<d_isnanl>, C<d_isnormal>, C<d_j0>, C<d_j0l>, C<d_killpg>, C<d_lc_monetary_2008>, C<d_lchown>, C<d_ldbl_dig>, C<d_ldexpl>, C<d_lgamma>, C<d_lgamma_r>, C<d_libm_lib_version>, C<d_libname_unique>, C<d_link>, C<d_linkat>, C<d_llrint>, C<d_llrintl>, C<d_llround>, C<d_llroundl>, C<d_localeconv_l>, C<d_localtime64>, C<d_localtime_r>, C<d_localtime_r_needs_tzset>, C<d_locconv>, C<d_lockf>, C<d_log1p>, C<d_log2>, C<d_logb>, C<d_long_double_style_ieee>, C<d_long_double_style_ieee_doubledouble>, C<d_long_double_style_ieee_extended>, C<d_long_double_style_ieee_std>, C<d_long_double_style_vax>, C<d_longdbl>, C<d_longlong>, C<d_lrint>, C<d_lrintl>, C<d_lround>, C<d_lroundl>, C<d_lseekproto>, C<d_lstat>, C<d_madvise>, C<d_malloc_good_size>, C<d_malloc_size>, C<d_mblen>, C<d_mbrlen>, C<d_mbrtowc>, C<d_mbstowcs>, C<d_mbtowc>, C<d_memmem>, C<d_memrchr>, C<d_mkdir>, C<d_mkdtemp>, C<d_mkfifo>, C<d_mkostemp>, C<d_mkstemp>, C<d_mkstemps>, C<d_mktime>, C<d_mktime64>, C<d_mmap>, C<d_modfl>, C<d_modflproto>, C<d_mprotect>, C<d_msg>, C<d_msg_ctrunc>, C<d_msg_dontroute>, C<d_msg_oob>, C<d_msg_peek>, C<d_msg_proxy>, C<d_msgctl>, C<d_msgget>, C<d_msghdr_s>, C<d_msgrcv>, C<d_msgsnd>, C<d_msync>, C<d_munmap>, C<d_mymalloc>, C<d_nan>, C<d_nanosleep>, C<d_ndbm>, C<d_ndbm_h_uses_prototypes>, C<d_nearbyint>, C<d_newlocale>, C<d_nextafter>, C<d_nexttoward>, C<d_nice>, C<d_nl_langinfo>, C<d_nv_preserves_uv>, C<d_nv_zero_is_allbits_zero>, C<d_off64_t>, C<d_old_pthread_create_joinable>, C<d_oldpthreads>, C<d_oldsock>, C<d_open3>, C<d_openat>, C<d_pathconf>, C<d_pause>, C<d_perl_otherlibdirs>, C<d_phostname>, C<d_pipe>, C<d_pipe2>, C<d_poll>, C<d_portable>, C<d_prctl>, C<d_prctl_set_name>, C<d_PRId64>, C<d_PRIeldbl>, C<d_PRIEUldbl>, C<d_PRIfldbl>, C<d_PRIFUldbl>, C<d_PRIgldbl>, C<d_PRIGUldbl>, C<d_PRIi64>, C<d_printf_format_null>, C<d_PRIo64>, C<d_PRIu64>, C<d_PRIx64>, C<d_PRIXU64>, C<d_procselfexe>, C<d_pseudofork>, C<d_pthread_atfork>, C<d_pthread_attr_setscope>, C<d_pthread_yield>, C<d_ptrdiff_t>, C<d_pwage>, C<d_pwchange>, C<d_pwclass>, C<d_pwcomment>, C<d_pwexpire>, C<d_pwgecos>, C<d_pwpasswd>, C<d_pwquota>, C<d_qgcvt>, C<d_quad>, C<d_querylocale>, C<d_random_r>, C<d_re_comp>, C<d_readdir>, C<d_readdir64_r>, C<d_readdir_r>, C<d_readlink>, C<d_readv>, C<d_recvmsg>, C<d_regcmp>, C<d_regcomp>, C<d_remainder>, C<d_remquo>, C<d_rename>, C<d_renameat>, C<d_rewinddir>, C<d_rint>, C<d_rmdir>, C<d_round>, C<d_sbrkproto>, C<d_scalbn>, C<d_scalbnl>, C<d_sched_yield>, C<d_scm_rights>, C<d_SCNfldbl>, C<d_seekdir>, C<d_select>, C<d_sem>, C<d_semctl>, C<d_semctl_semid_ds>, C<d_semctl_semun>, C<d_semget>, C<d_semop>, C<d_sendmsg>, C<d_setegid>, C<d_seteuid>, C<d_setgrent>, C<d_setgrent_r>, C<d_setgrps>, C<d_sethent>, C<d_sethostent_r>, C<d_setitimer>, C<d_setlinebuf>, C<d_setlocale>, C<d_setlocale_accepts_any_locale_name>, C<d_setlocale_r>, C<d_setnent>, C<d_setnetent_r>, C<d_setpent>, C<d_setpgid>, C<d_setpgrp>, C<d_setpgrp2>, C<d_setprior>, C<d_setproctitle>, C<d_setprotoent_r>, C<d_setpwent>, C<d_setpwent_r>, C<d_setregid>, C<d_setresgid>, C<d_setresuid>, C<d_setreuid>, C<d_setrgid>, C<d_setruid>, C<d_setsent>, C<d_setservent_r>, C<d_setsid>, C<d_setvbuf>, C<d_shm>, C<d_shmat>, C<d_shmatprototype>, C<d_shmctl>, C<d_shmdt>, C<d_shmget>, C<d_sigaction>, C<d_siginfo_si_addr>, C<d_siginfo_si_band>, C<d_siginfo_si_errno>, C<d_siginfo_si_fd>, C<d_siginfo_si_pid>, C<d_siginfo_si_status>, C<d_siginfo_si_uid>, C<d_siginfo_si_value>, C<d_signbit>, C<d_sigprocmask>, C<d_sigsetjmp>, C<d_sin6_scope_id>, C<d_sitearch>, C<d_snprintf>, C<d_sockaddr_in6>, C<d_sockaddr_sa_len>, C<d_sockatmark>, C<d_sockatmarkproto>, C<d_socket>, C<d_socklen_t>, C<d_sockpair>, C<d_socks5_init>, C<d_sqrtl>, C<d_srand48_r>, C<d_srandom_r>, C<d_sresgproto>, C<d_sresuproto>, C<d_stat>, C<d_statblks>, C<d_statfs_f_flags>, C<d_statfs_s>, C<d_static_inline>, C<d_statvfs>, C<d_stdio_cnt_lval>, C<d_stdio_ptr_lval>, C<d_stdio_ptr_lval_nochange_cnt>, C<d_stdio_ptr_lval_sets_cnt>, C<d_stdio_stream_array>, C<d_stdiobase>, C<d_stdstdio>, C<d_strcoll>, C<d_strerror_l>, C<d_strerror_r>, C<d_strftime>, C<d_strlcat>, C<d_strlcpy>, C<d_strnlen>, C<d_strtod>, C<d_strtod_l>, C<d_strtol>, C<d_strtold>, C<d_strtold_l>, C<d_strtoll>, C<d_strtoq>, C<d_strtoul>, C<d_strtoull>, C<d_strtouq>, C<d_strxfrm>, C<d_suidsafe>, C<d_symlink>, C<d_syscall>, C<d_syscallproto>, C<d_sysconf>, C<d_sysernlst>, C<d_syserrlst>, C<d_system>, C<d_tcgetpgrp>, C<d_tcsetpgrp>, C<d_telldir>, C<d_telldirproto>, C<d_tgamma>, C<d_thread_safe_nl_langinfo_l>, C<d_time>, C<d_timegm>, C<d_times>, C<d_tm_tm_gmtoff>, C<d_tm_tm_zone>, C<d_tmpnam_r>, C<d_towlower>, C<d_towupper>, C<d_trunc>, C<d_truncate>, C<d_truncl>, C<d_ttyname_r>, C<d_tzname>, C<d_u32align>, C<d_ualarm>, C<d_umask>, C<d_uname>, C<d_union_semun>, C<d_unlinkat>, C<d_unordered>, C<d_unsetenv>, C<d_uselocale>, C<d_usleep>, C<d_usleepproto>, C<d_ustat>, C<d_vendorarch>, C<d_vendorbin>, C<d_vendorlib>, C<d_vendorscript>, C<d_vfork>, C<d_void_closedir>, C<d_voidsig>, C<d_voidtty>, C<d_vsnprintf>, C<d_wait4>, C<d_waitpid>, C<d_wcscmp>, C<d_wcstombs>, C<d_wcsxfrm>, C<d_wctomb>, C<d_writev>, C<d_xenix>, C<date>, C<db_hashtype>, C<db_prefixtype>, C<db_version_major>, C<db_version_minor>, C<db_version_patch>, C<default_inc_excludes_dot>, C<direntrytype>, C<dlext>, C<dlsrc>, C<doubleinfbytes>, C<doublekind>, C<doublemantbits>, C<doublenanbytes>, C<doublesize>, C<drand01>, C<drand48_r_proto>, C<dtrace>, C<dtraceobject>, C<dtracexnolibs>, C<dynamic_ext> =item e C<eagain>, C<ebcdic>, C<echo>, C<egrep>, C<emacs>, C<endgrent_r_proto>, C<endhostent_r_proto>, C<endnetent_r_proto>, C<endprotoent_r_proto>, C<endpwent_r_proto>, C<endservent_r_proto>, C<eunicefix>, C<exe_ext>, C<expr>, C<extensions>, C<extern_C>, C<extras> =item f C<fflushall>, C<fflushNULL>, C<find>, C<firstmakefile>, C<flex>, C<fpossize>, C<fpostype>, C<freetype>, C<from>, C<full_ar>, C<full_csh>, C<full_sed> =item g C<gccansipedantic>, C<gccosandvers>, C<gccversion>, C<getgrent_r_proto>, C<getgrgid_r_proto>, C<getgrnam_r_proto>, C<gethostbyaddr_r_proto>, C<gethostbyname_r_proto>, C<gethostent_r_proto>, C<getlogin_r_proto>, C<getnetbyaddr_r_proto>, C<getnetbyname_r_proto>, C<getnetent_r_proto>, C<getprotobyname_r_proto>, C<getprotobynumber_r_proto>, C<getprotoent_r_proto>, C<getpwent_r_proto>, C<getpwnam_r_proto>, C<getpwuid_r_proto>, C<getservbyname_r_proto>, C<getservbyport_r_proto>, C<getservent_r_proto>, C<getspnam_r_proto>, C<gidformat>, C<gidsign>, C<gidsize>, C<gidtype>, C<glibpth>, C<gmake>, C<gmtime_r_proto>, C<gnulibc_version>, C<grep>, C<groupcat>, C<groupstype>, C<gzip> =item h C<h_fcntl>, C<h_sysfile>, C<hint>, C<hostcat>, C<hostgenerate>, C<hostosname>, C<hostperl>, C<html1dir>, C<html1direxp>, C<html3dir>, C<html3direxp> =item i C<i16size>, C<i16type>, C<i32size>, C<i32type>, C<i64size>, C<i64type>, C<i8size>, C<i8type>, C<i_arpainet>, C<i_bfd>, C<i_bsdioctl>, C<i_crypt>, C<i_db>, C<i_dbm>, C<i_dirent>, C<i_dlfcn>, C<i_execinfo>, C<i_fcntl>, C<i_fenv>, C<i_fp>, C<i_fp_class>, C<i_gdbm>, C<i_gdbm_ndbm>, C<i_gdbmndbm>, C<i_grp>, C<i_ieeefp>, C<i_inttypes>, C<i_langinfo>, C<i_libutil>, C<i_locale>, C<i_machcthr>, C<i_malloc>, C<i_mallocmalloc>, C<i_mntent>, C<i_ndbm>, C<i_netdb>, C<i_neterrno>, C<i_netinettcp>, C<i_niin>, C<i_poll>, C<i_prot>, C<i_pthread>, C<i_pwd>, C<i_quadmath>, C<i_rpcsvcdbm>, C<i_sgtty>, C<i_shadow>, C<i_socks>, C<i_stdbool>, C<i_stdint>, C<i_stdlib>, C<i_sunmath>, C<i_sysaccess>, C<i_sysdir>, C<i_sysfile>, C<i_sysfilio>, C<i_sysin>, C<i_sysioctl>, C<i_syslog>, C<i_sysmman>, C<i_sysmode>, C<i_sysmount>, C<i_sysndir>, C<i_sysparam>, C<i_syspoll>, C<i_sysresrc>, C<i_syssecrt>, C<i_sysselct>, C<i_syssockio>, C<i_sysstat>, C<i_sysstatfs>, C<i_sysstatvfs>, C<i_systime>, C<i_systimek>, C<i_systimes>, C<i_systypes>, C<i_sysuio>, C<i_sysun>, C<i_sysutsname>, C<i_sysvfs>, C<i_syswait>, C<i_termio>, C<i_termios>, C<i_time>, C<i_unistd>, C<i_ustat>, C<i_utime>, C<i_vfork>, C<i_wchar>, C<i_wctype>, C<i_xlocale>, C<ignore_versioned_solibs>, C<inc_version_list>, C<inc_version_list_init>, C<incpath>, C<incpth>, C<inews>, C<initialinstalllocation>, C<installarchlib>, C<installbin>, C<installhtml1dir>, C<installhtml3dir>, C<installman1dir>, C<installman3dir>, C<installprefix>, C<installprefixexp>, C<installprivlib>, C<installscript>, C<installsitearch>, C<installsitebin>, C<installsitehtml1dir>, C<installsitehtml3dir>, C<installsitelib>, C<installsiteman1dir>, C<installsiteman3dir>, C<installsitescript>, C<installstyle>, C<installusrbinperl>, C<installvendorarch>, C<installvendorbin>, C<installvendorhtml1dir>, C<installvendorhtml3dir>, C<installvendorlib>, C<installvendorman1dir>, C<installvendorman3dir>, C<installvendorscript>, C<intsize>, C<issymlink>, C<ivdformat>, C<ivsize>, C<ivtype> =item k C<known_extensions>, C<ksh> =item l C<ld>, C<ld_can_script>, C<lddlflags>, C<ldflags>, C<ldflags_uselargefiles>, C<ldlibpthname>, C<less>, C<lib_ext>, C<libc>, C<libperl>, C<libpth>, C<libs>, C<libsdirs>, C<libsfiles>, C<libsfound>, C<libspath>, C<libswanted>, C<libswanted_uselargefiles>, C<line>, C<lint>, C<lkflags>, C<ln>, C<lns>, C<localtime_r_proto>, C<locincpth>, C<loclibpth>, C<longdblinfbytes>, C<longdblkind>, C<longdblmantbits>, C<longdblnanbytes>, C<longdblsize>, C<longlongsize>, C<longsize>, C<lp>, C<lpr>, C<ls>, C<lseeksize>, C<lseektype> =item m C<mail>, C<mailx>, C<make>, C<make_set_make>, C<mallocobj>, C<mallocsrc>, C<malloctype>, C<man1dir>, C<man1direxp>, C<man1ext>, C<man3dir>, C<man3direxp>, C<man3ext>, C<mips_type>, C<mistrustnm>, C<mkdir>, C<mmaptype>, C<modetype>, C<more>, C<multiarch>, C<mv>, C<myarchname>, C<mydomain>, C<myhostname>, C<myuname> =item n C<n>, C<need_va_copy>, C<netdb_hlen_type>, C<netdb_host_type>, C<netdb_name_type>, C<netdb_net_type>, C<nm>, C<nm_opt>, C<nm_so_opt>, C<nonxs_ext>, C<nroff>, C<nv_overflows_integers_at>, C<nv_preserves_uv_bits>, C<nveformat>, C<nvEUformat>, C<nvfformat>, C<nvFUformat>, C<nvgformat>, C<nvGUformat>, C<nvmantbits>, C<nvsize>, C<nvtype> =item o C<o_nonblock>, C<obj_ext>, C<old_pthread_create_joinable>, C<optimize>, C<orderlib>, C<osname>, C<osvers>, C<otherlibdirs> =item p C<package>, C<pager>, C<passcat>, C<patchlevel>, C<path_sep>, C<perl>, C<perl5> =item P C<PERL_API_REVISION>, C<PERL_API_SUBVERSION>, C<PERL_API_VERSION>, C<PERL_CONFIG_SH>, C<PERL_PATCHLEVEL>, C<perl_patchlevel>, C<PERL_REVISION>, C<perl_static_inline>, C<PERL_SUBVERSION>, C<PERL_VERSION>, C<perladmin>, C<perllibs>, C<perlpath>, C<pg>, C<phostname>, C<pidtype>, C<plibpth>, C<pmake>, C<pr>, C<prefix>, C<prefixexp>, C<privlib>, C<privlibexp>, C<procselfexe>, C<ptrsize> =item q C<quadkind>, C<quadtype> =item r C<randbits>, C<randfunc>, C<random_r_proto>, C<randseedtype>, C<ranlib>, C<rd_nodata>, C<readdir64_r_proto>, C<readdir_r_proto>, C<revision>, C<rm>, C<rm_try>, C<rmail>, C<run>, C<runnm> =item s C<sched_yield>, C<scriptdir>, C<scriptdirexp>, C<sed>, C<seedfunc>, C<selectminbits>, C<selecttype>, C<sendmail>, C<setgrent_r_proto>, C<sethostent_r_proto>, C<setlocale_r_proto>, C<setnetent_r_proto>, C<setprotoent_r_proto>, C<setpwent_r_proto>, C<setservent_r_proto>, C<sGMTIME_max>, C<sGMTIME_min>, C<sh>, C<shar>, C<sharpbang>, C<shmattype>, C<shortsize>, C<shrpenv>, C<shsharp>, C<sig_count>, C<sig_name>, C<sig_name_init>, C<sig_num>, C<sig_num_init>, C<sig_size>, C<signal_t>, C<sitearch>, C<sitearchexp>, C<sitebin>, C<sitebinexp>, C<sitehtml1dir>, C<sitehtml1direxp>, C<sitehtml3dir>, C<sitehtml3direxp>, C<sitelib>, C<sitelib_stem>, C<sitelibexp>, C<siteman1dir>, C<siteman1direxp>, C<siteman3dir>, C<siteman3direxp>, C<siteprefix>, C<siteprefixexp>, C<sitescript>, C<sitescriptexp>, C<sizesize>, C<sizetype>, C<sleep>, C<sLOCALTIME_max>, C<sLOCALTIME_min>, C<smail>, C<so>, C<sockethdr>, C<socketlib>, C<socksizetype>, C<sort>, C<spackage>, C<spitshell>, C<sPRId64>, C<sPRIeldbl>, C<sPRIEUldbl>, C<sPRIfldbl>, C<sPRIFUldbl>, C<sPRIgldbl>, C<sPRIGUldbl>, C<sPRIi64>, C<sPRIo64>, C<sPRIu64>, C<sPRIx64>, C<sPRIXU64>, C<srand48_r_proto>, C<srandom_r_proto>, C<src>, C<sSCNfldbl>, C<ssizetype>, C<st_ino_sign>, C<st_ino_size>, C<startperl>, C<startsh>, C<static_ext>, C<stdchar>, C<stdio_base>, C<stdio_bufsiz>, C<stdio_cnt>, C<stdio_filbuf>, C<stdio_ptr>, C<stdio_stream_array>, C<strerror_r_proto>, C<submit>, C<subversion>, C<sysman>, C<sysroot> =item t C<tail>, C<tar>, C<targetarch>, C<targetdir>, C<targetenv>, C<targethost>, C<targetmkdir>, C<targetport>, C<targetsh>, C<tbl>, C<tee>, C<test>, C<timeincl>, C<timetype>, C<tmpnam_r_proto>, C<to>, C<touch>, C<tr>, C<trnl>, C<troff>, C<ttyname_r_proto> =item u C<u16size>, C<u16type>, C<u32size>, C<u32type>, C<u64size>, C<u64type>, C<u8size>, C<u8type>, C<uidformat>, C<uidsign>, C<uidsize>, C<uidtype>, C<uname>, C<uniq>, C<uquadtype>, C<use5005threads>, C<use64bitall>, C<use64bitint>, C<usecbacktrace>, C<usecrosscompile>, C<usedevel>, C<usedl>, C<usedtrace>, C<usefaststdio>, C<useithreads>, C<usekernprocpathname>, C<uselanginfo>, C<uselargefiles>, C<uselongdouble>, C<usemallocwrap>, C<usemorebits>, C<usemultiplicity>, C<usemymalloc>, C<usenm>, C<usensgetexecutablepath>, C<useopcode>, C<useperlio>, C<useposix>, C<usequadmath>, C<usereentrant>, C<userelocatableinc>, C<useshrplib>, C<usesitecustomize>, C<usesocks>, C<usethreads>, C<usevendorprefix>, C<useversionedarchname>, C<usevfork>, C<usrinc>, C<uuname>, C<uvoformat>, C<uvsize>, C<uvtype>, C<uvuformat>, C<uvxformat>, C<uvXUformat> =item v C<vendorarch>, C<vendorarchexp>, C<vendorbin>, C<vendorbinexp>, C<vendorhtml1dir>, C<vendorhtml1direxp>, C<vendorhtml3dir>, C<vendorhtml3direxp>, C<vendorlib>, C<vendorlib_stem>, C<vendorlibexp>, C<vendorman1dir>, C<vendorman1direxp>, C<vendorman3dir>, C<vendorman3direxp>, C<vendorprefix>, C<vendorprefixexp>, C<vendorscript>, C<vendorscriptexp>, C<version>, C<version_patchlevel_string>, C<versiononly>, C<vi> =item x C<xlibpth> =item y C<yacc>, C<yaccflags> =item z C<zcat>, C<zip> =back =over 4 =item GIT DATA =item NOTE =back =head2 Config::Extensions - hash lookup of which core extensions were built. =over 4 =item SYNOPSIS =item DESCRIPTION dynamic, nonxs, static =item AUTHOR =back =head2 Config::Perl::V - Structured data retrieval of perl -V output =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item $conf = myconfig () =item $conf = plv2hash ($text [, ...]) =item $info = summary ([$conf]) =item $md5 = signature ([$conf]) =item The hash structure build, osname, stamp, options, derived, patches, environment, config, inc =back =item REASONING =item BUGS =item TODO =item AUTHOR =item COPYRIGHT AND LICENSE =back =head2 Cwd - get pathname of current working directory =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item getcwd and friends getcwd, cwd, fastcwd, fastgetcwd, getdcwd =item abs_path and friends abs_path, realpath, fast_abs_path =item $ENV{PWD} =back =item NOTES =item AUTHOR =item COPYRIGHT =item SEE ALSO =back =head2 DB - programmatic interface to the Perl debugging API =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Global Variables $DB::sub, %DB::sub, $DB::single, $DB::signal, $DB::trace, @DB::args, @DB::dbline, %DB::dbline, $DB::package, $DB::filename, $DB::subname, $DB::lineno =item API Methods CLIENT->register(), CLIENT->evalcode(STRING), CLIENT->skippkg('D::hide'), CLIENT->run(), CLIENT->step(), CLIENT->next(), CLIENT->done() =item Client Callback Methods CLIENT->init(), CLIENT->prestop([STRING]), CLIENT->stop(), CLIENT->idle(), CLIENT->poststop([STRING]), CLIENT->evalcode(STRING), CLIENT->cleanup(), CLIENT->output(LIST) =back =item BUGS =item AUTHOR =back =head2 DBM_Filter -- Filter DBM keys/values =over 4 =item SYNOPSIS =item DESCRIPTION =item What is a DBM Filter? =over 4 =item So what's new? =back =item METHODS =over 4 =item $db->Filter_Push() / $db->Filter_Key_Push() / $db->Filter_Value_Push() Filter_Push, Filter_Key_Push, Filter_Value_Push =item $db->Filter_Pop() =item $db->Filtered() =back =item Writing a Filter =over 4 =item Immediate Filters =item Canned Filters "name", params =back =item Filters Included utf8, encode, compress, int32, null =item NOTES =over 4 =item Maintain Round Trip Integrity =item Don't mix filtered & non-filtered data in the same database file. =back =item EXAMPLE =item SEE ALSO =item AUTHOR =back =head2 DBM_Filter::compress - filter for DBM_Filter =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item AUTHOR =back =head2 DBM_Filter::encode - filter for DBM_Filter =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item AUTHOR =back =head2 DBM_Filter::int32 - filter for DBM_Filter =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item AUTHOR =back =head2 DBM_Filter::null - filter for DBM_Filter =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item AUTHOR =back =head2 DBM_Filter::utf8 - filter for DBM_Filter =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item AUTHOR =back =head2 DB_File - Perl5 access to Berkeley DB version 1.x =over 4 =item SYNOPSIS =item DESCRIPTION B<DB_HASH>, B<DB_BTREE>, B<DB_RECNO> =over 4 =item Using DB_File with Berkeley DB version 2 or greater =item Interface to Berkeley DB =item Opening a Berkeley DB Database File =item Default Parameters =item In Memory Databases =back =item DB_HASH =over 4 =item A Simple Example =back =item DB_BTREE =over 4 =item Changing the BTREE sort order =item Handling Duplicate Keys =item The get_dup() Method =item The find_dup() Method =item The del_dup() Method =item Matching Partial Keys =back =item DB_RECNO =over 4 =item The 'bval' Option =item A Simple Example =item Extra RECNO Methods B<$X-E<gt>push(list) ;>, B<$value = $X-E<gt>pop ;>, B<$X-E<gt>shift>, B<$X-E<gt>unshift(list) ;>, B<$X-E<gt>length>, B<$X-E<gt>splice(offset, length, elements);> =item Another Example =back =item THE API INTERFACE B<$status = $X-E<gt>get($key, $value [, $flags]) ;>, B<$status = $X-E<gt>put($key, $value [, $flags]) ;>, B<$status = $X-E<gt>del($key [, $flags]) ;>, B<$status = $X-E<gt>fd ;>, B<$status = $X-E<gt>seq($key, $value, $flags) ;>, B<$status = $X-E<gt>sync([$flags]) ;> =item DBM FILTERS =over 4 =item DBM Filter Low-level API B<filter_store_key>, B<filter_store_value>, B<filter_fetch_key>, B<filter_fetch_value> =item The Filter =item An Example -- the NULL termination problem. =item Another Example -- Key is a C int. =back =item HINTS AND TIPS =over 4 =item Locking: The Trouble with fd =item Safe ways to lock a database B<Tie::DB_Lock>, B<Tie::DB_LockFile>, B<DB_File::Lock> =item Sharing Databases With C Applications =item The untie() Gotcha =back =item COMMON QUESTIONS =over 4 =item Why is there Perl source in my database? =item How do I store complex data structures with DB_File? =item What does "wide character in subroutine entry" mean? =item What does "Invalid Argument" mean? =item What does "Bareword 'DB_File' not allowed" mean? =back =item REFERENCES =item HISTORY =item BUGS =item SUPPORT =item AVAILABILITY =item COPYRIGHT =item SEE ALSO =item AUTHOR =back =head2 Data::Dumper - stringified perl data structures, suitable for both printing and C<eval> =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Methods I<PACKAGE>->new(I<ARRAYREF [>, I<ARRAYREF]>), I<$OBJ>->Dump I<or> I<PACKAGE>->Dump(I<ARRAYREF [>, I<ARRAYREF]>), I<$OBJ>->Seen(I<[HASHREF]>), I<$OBJ>->Values(I<[ARRAYREF]>), I<$OBJ>->Names(I<[ARRAYREF]>), I<$OBJ>->Reset =item Functions Dumper(I<LIST>) =item Configuration Variables or Methods =item Exports Dumper =back =item EXAMPLES =item BUGS =over 4 =item NOTE =back =item AUTHOR =item VERSION =item SEE ALSO =back =head2 Devel::PPPort - Perl/Pollution/Portability =over 4 =item SYNOPSIS =item Start using Devel::PPPort for XS projects =item DESCRIPTION =over 4 =item Why use ppport.h? =item How to use ppport.h =item Running ppport.h =back =item FUNCTIONS =over 4 =item WriteFile =item GetFileContents =back =item COMPATIBILITY =over 4 =item Provided Perl compatibility API =item Supported Perl API, sorted by version perl 5.31.5, perl 5.31.4, perl 5.31.3, perl 5.29.10, perl 5.29.9, perl 5.27.9, perl 5.27.8, perl 5.27.7, perl 5.27.6, perl 5.27.4, perl 5.27.3, perl 5.27.2, perl 5.27.1, perl 5.25.10, perl 5.25.9, perl 5.25.8, perl 5.25.7, perl 5.25.6, perl 5.25.5, perl 5.25.3, perl 5.25.1, perl 5.23.8, perl 5.23.2, perl 5.23.0, perl 5.21.10, perl 5.21.9, perl 5.21.8, perl 5.21.7, perl 5.21.6, perl 5.21.5, perl 5.21.4, perl 5.21.2, perl 5.21.1, perl 5.19.10, perl 5.19.9, perl 5.19.7, perl 5.19.5, perl 5.19.4, perl 5.19.3, perl 5.19.2, perl 5.19.1, perl 5.18.0, perl 5.17.11, perl 5.17.8, perl 5.17.7, perl 5.17.6, perl 5.17.5, perl 5.17.4, perl 5.17.2, perl 5.17.1, perl 5.16.0, perl 5.15.8, perl 5.15.6, perl 5.15.4, perl 5.15.3, perl 5.15.2, perl 5.15.1, perl 5.13.10, perl 5.13.9, perl 5.13.8, perl 5.13.7, perl 5.13.6, perl 5.13.5, perl 5.13.4, perl 5.13.3, perl 5.13.2, perl 5.13.1, perl 5.11.5, perl 5.11.4, perl 5.11.2, perl 5.11.1, perl 5.11.0, perl 5.10.1, perl 5.10.0, perl 5.9.5, perl 5.9.4, perl 5.9.3, perl 5.9.2, perl 5.9.1, perl 5.9.0, perl 5.8.9, perl 5.8.8, perl 5.8.3, perl 5.8.1, perl 5.8.0, perl 5.7.3, perl 5.7.2, perl 5.7.1, perl 5.6.1, perl 5.6.0, perl 5.005_03, perl 5.005, perl 5.004_05, perl 5.004, perl 5.003_07 (at least), Backported version unknown =back =item BUGS =item AUTHORS =item COPYRIGHT =item SEE ALSO =back =head2 Devel::Peek - A data debugging tool for the XS programmer =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Runtime debugging =item Memory footprint debugging =back =item EXAMPLES =over 4 =item A simple scalar string =item A simple scalar number =item A simple scalar with an extra reference =item A reference to a simple scalar =item A reference to an array =item A reference to a hash =item Dumping a large array or hash =item A reference to an SV which holds a C pointer =item A reference to a subroutine =back =item EXPORTS =item BUGS =item AUTHOR =item SEE ALSO =back =head2 Devel::SelfStubber - generate stubs for a SelfLoading module =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 Digest - Modules that calculate message digests =over 4 =item SYNOPSIS =item DESCRIPTION I<binary>, I<hex>, I<base64> =item OO INTERFACE $ctx = Digest->XXX($arg,...), $ctx = Digest->new(XXX => $arg,...), $ctx = Digest::XXX->new($arg,...), $other_ctx = $ctx->clone, $ctx->reset, $ctx->add( $data ), $ctx->add( $chunk1, $chunk2, ... ), $ctx->addfile( $io_handle ), $ctx->add_bits( $data, $nbits ), $ctx->add_bits( $bitstring ), $ctx->digest, $ctx->hexdigest, $ctx->b64digest =item Digest speed =item SEE ALSO =item AUTHOR =back =head2 Digest::MD5 - Perl interface to the MD5 Algorithm =over 4 =item SYNOPSIS =item DESCRIPTION =item FUNCTIONS md5($data,...), md5_hex($data,...), md5_base64($data,...) =item METHODS $md5 = Digest::MD5->new, $md5->reset, $md5->clone, $md5->add($data,...), $md5->addfile($io_handle), $md5->add_bits($data, $nbits), $md5->add_bits($bitstring), $md5->digest, $md5->hexdigest, $md5->b64digest, @ctx = $md5->context, $md5->context(@ctx) =item EXAMPLES =item SEE ALSO =item COPYRIGHT =item AUTHORS =back =head2 Digest::SHA - Perl extension for SHA-1/224/256/384/512 =over 4 =item SYNOPSIS =item SYNOPSIS (HMAC-SHA) =item ABSTRACT =item DESCRIPTION =item UNICODE AND SIDE EFFECTS =item NIST STATEMENT ON SHA-1 =item PADDING OF BASE64 DIGESTS =item EXPORT =item EXPORTABLE FUNCTIONS B<sha1($data, ...)>, B<sha224($data, ...)>, B<sha256($data, ...)>, B<sha384($data, ...)>, B<sha512($data, ...)>, B<sha512224($data, ...)>, B<sha512256($data, ...)>, B<sha1_hex($data, ...)>, B<sha224_hex($data, ...)>, B<sha256_hex($data, ...)>, B<sha384_hex($data, ...)>, B<sha512_hex($data, ...)>, B<sha512224_hex($data, ...)>, B<sha512256_hex($data, ...)>, B<sha1_base64($data, ...)>, B<sha224_base64($data, ...)>, B<sha256_base64($data, ...)>, B<sha384_base64($data, ...)>, B<sha512_base64($data, ...)>, B<sha512224_base64($data, ...)>, B<sha512256_base64($data, ...)>, B<new($alg)>, B<reset($alg)>, B<hashsize>, B<algorithm>, B<clone>, B<add($data, ...)>, B<add_bits($data, $nbits)>, B<add_bits($bits)>, B<addfile(*FILE)>, B<addfile($filename [, $mode])>, B<getstate>, B<putstate($str)>, B<dump($filename)>, B<load($filename)>, B<digest>, B<hexdigest>, B<b64digest>, B<hmac_sha1($data, $key)>, B<hmac_sha224($data, $key)>, B<hmac_sha256($data, $key)>, B<hmac_sha384($data, $key)>, B<hmac_sha512($data, $key)>, B<hmac_sha512224($data, $key)>, B<hmac_sha512256($data, $key)>, B<hmac_sha1_hex($data, $key)>, B<hmac_sha224_hex($data, $key)>, B<hmac_sha256_hex($data, $key)>, B<hmac_sha384_hex($data, $key)>, B<hmac_sha512_hex($data, $key)>, B<hmac_sha512224_hex($data, $key)>, B<hmac_sha512256_hex($data, $key)>, B<hmac_sha1_base64($data, $key)>, B<hmac_sha224_base64($data, $key)>, B<hmac_sha256_base64($data, $key)>, B<hmac_sha384_base64($data, $key)>, B<hmac_sha512_base64($data, $key)>, B<hmac_sha512224_base64($data, $key)>, B<hmac_sha512256_base64($data, $key)> =item SEE ALSO =item AUTHOR =item ACKNOWLEDGMENTS =item COPYRIGHT AND LICENSE =back =head2 Digest::base - Digest base class =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =back =head2 Digest::file - Calculate digests of files =over 4 =item SYNOPSIS =item DESCRIPTION digest_file( $file, $algorithm, [$arg,...] ), digest_file_hex( $file, $algorithm, [$arg,...] ), digest_file_base64( $file, $algorithm, [$arg,...] ) =item SEE ALSO =back =head2 DirHandle - (obsolete) supply object methods for directory handles =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 Dumpvalue - provides screen dump of Perl data. =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Creation C<arrayDepth>, C<hashDepth>, C<compactDump>, C<veryCompact>, C<globPrint>, C<dumpDBFiles>, C<dumpPackages>, C<dumpReused>, C<tick>, C<quoteHighBit>, C<printUndef>, C<usageOnly>, unctrl, subdump, bareStringify, quoteHighBit, stopDbSignal =item Methods dumpValue, dumpValues, stringify, dumpvars, set_quote, set_unctrl, compactDump, veryCompact, set, get =back =back =head2 DynaLoader - Dynamically load C libraries into Perl code =over 4 =item SYNOPSIS =item DESCRIPTION @dl_library_path, @dl_resolve_using, @dl_require_symbols, @dl_librefs, @dl_modules, @dl_shared_objects, dl_error(), $dl_debug, $dl_dlext, dl_findfile(), dl_expandspec(), dl_load_file(), dl_unload_file(), dl_load_flags(), dl_find_symbol(), dl_find_symbol_anywhere(), dl_undef_symbols(), dl_install_xsub(), bootstrap() =item AUTHOR =back =head2 Encode - character encodings in Perl =over 4 =item SYNOPSIS =over 4 =item Table of Contents L<Encode::Alias> - Alias definitions to encodings, L<Encode::Encoding> - Encode Implementation Base Class, L<Encode::Supported> - List of Supported Encodings, L<Encode::CN> - Simplified Chinese Encodings, L<Encode::JP> - Japanese Encodings, L<Encode::KR> - Korean Encodings, L<Encode::TW> - Traditional Chinese Encodings =back =item DESCRIPTION =over 4 =item TERMINOLOGY =back =item THE PERL ENCODING API =over 4 =item Basic methods =item Listing available encodings =item Defining Aliases =item Finding IANA Character Set Registry names =back =item Encoding via PerlIO =item Handling Malformed Data =over 4 =item List of I<CHECK> values perlqq mode (I<CHECK> = Encode::FB_PERLQQ), HTML charref mode (I<CHECK> = Encode::FB_HTMLCREF), XML charref mode (I<CHECK> = Encode::FB_XMLCREF) =item coderef for CHECK =back =item Defining Encodings =item The UTF8 flag Goal #1:, Goal #2:, Goal #3:, Goal #4: =over 4 =item Messing with Perl's Internals =back =item UTF-8 vs. utf8 vs. UTF8 =item SEE ALSO =item MAINTAINER =item COPYRIGHT =back =head2 Encode::Alias - alias definitions to encodings =over 4 =item SYNOPSIS =item DESCRIPTION As a simple string, As a qr// compiled regular expression, e.g.:, As a code reference, e.g.: =over 4 =item Alias overloading =back =item SEE ALSO =back =head2 Encode::Byte - Single Byte Encodings =over 4 =item SYNOPSIS =item ABSTRACT =item DESCRIPTION =item SEE ALSO =back =head2 Encode::CJKConstants -- Internally used by Encode::??::ISO_2022_* =head2 Encode::CN - China-based Chinese Encodings =over 4 =item SYNOPSIS =item DESCRIPTION =item NOTES =item BUGS =item SEE ALSO =back =head2 Encode::CN::HZ -- internally used by Encode::CN =head2 Encode::Config -- internally used by Encode =head2 Encode::EBCDIC - EBCDIC Encodings =over 4 =item SYNOPSIS =item ABSTRACT =item DESCRIPTION =item SEE ALSO =back =head2 Encode::Encoder -- Object Oriented Encoder =over 4 =item SYNOPSIS =item ABSTRACT =item Description =over 4 =item Predefined Methods $e = Encode::Encoder-E<gt>new([$data, $encoding]);, encoder(), $e-E<gt>data([$data]), $e-E<gt>encoding([$encoding]), $e-E<gt>bytes([$encoding]) =item Example: base64 transcoder =item Operator Overloading =back =item SEE ALSO =back =head2 Encode::Encoding - Encode Implementation Base Class =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Methods you should implement -E<gt>encode($string [,$check]), -E<gt>decode($octets [,$check]), -E<gt>cat_decode($destination, $octets, $offset, $terminator [,$check]) =item Other methods defined in Encode::Encodings -E<gt>name, -E<gt>mime_name, -E<gt>renew, -E<gt>renewed, -E<gt>perlio_ok(), -E<gt>needs_lines() =item Example: Encode::ROT13 =back =item Why the heck Encode API is different? =over 4 =item Compiled Encodings =back =item SEE ALSO Scheme 1, Scheme 2, Other Schemes =back =head2 Encode::GSM0338 -- ESTI GSM 03.38 Encoding =over 4 =item SYNOPSIS =item DESCRIPTION =item NOTES =item BUGS =item SEE ALSO =back =head2 Encode::Guess -- Guesses encoding from data =over 4 =item SYNOPSIS =item ABSTRACT =item DESCRIPTION Encode::Guess->set_suspects, Encode::Guess->add_suspects, Encode::decode("Guess" ...), Encode::Guess->guess($data), guess_encoding($data, [, I<list of suspects>]) =item CAVEATS =item TO DO =item SEE ALSO =back =head2 Encode::JP - Japanese Encodings =over 4 =item SYNOPSIS =item ABSTRACT =item DESCRIPTION =item Note on ISO-2022-JP(-1)? =item BUGS =item SEE ALSO =back =head2 Encode::JP::H2Z -- internally used by Encode::JP::2022_JP* =head2 Encode::JP::JIS7 -- internally used by Encode::JP =head2 Encode::KR - Korean Encodings =over 4 =item SYNOPSIS =item DESCRIPTION =item BUGS =item SEE ALSO =back =head2 Encode::KR::2022_KR -- internally used by Encode::KR =head2 Encode::MIME::Header -- MIME encoding for an unstructured email header =over 4 =item SYNOPSIS =item ABSTRACT =item DESCRIPTION =item BUGS =item AUTHORS =item SEE ALSO =back =head2 Encode::MIME::Name, Encode::MIME::NAME -- internally used by Encode =over 4 =item SEE ALSO =back =head2 Encode::PerlIO -- a detailed document on Encode and PerlIO =over 4 =item Overview =item How does it work? =item Line Buffering =over 4 =item How can I tell whether my encoding fully supports PerlIO ? =back =item SEE ALSO =back =head2 Encode::Supported -- Encodings supported by Encode =over 4 =item DESCRIPTION =over 4 =item Encoding Names =back =item Supported Encodings =over 4 =item Built-in Encodings =item Encode::Unicode -- other Unicode encodings =item Encode::Byte -- Extended ASCII ISO-8859 and corresponding vendor mappings, KOI8 - De Facto Standard for the Cyrillic world =item gsm0338 - Hentai Latin 1 gsm0338 support before 2.19 =item CJK: Chinese, Japanese, Korean (Multibyte) Encode::CN -- Continental China, Encode::JP -- Japan, Encode::KR -- Korea, Encode::TW -- Taiwan, Encode::HanExtra -- More Chinese via CPAN, Encode::JIS2K -- JIS X 0213 encodings via CPAN =item Miscellaneous encodings Encode::EBCDIC, Encode::Symbols, Encode::MIME::Header, Encode::Guess =back =item Unsupported encodings ISO-2022-JP-2 [RFC1554], ISO-2022-CN [RFC1922], Various HP-UX encodings, Cyrillic encoding ISO-IR-111, ISO-8859-8-1 [Hebrew], ISIRI 3342, Iran System, ISIRI 2900 [Farsi], Thai encoding TCVN, Vietnamese encodings VPS, Various Mac encodings, (Mac) Indic encodings =item Encoding vs. Charset -- terminology =item Encoding Classification (by Anton Tagunov and Dan Kogai) =over 4 =item Microsoft-related naming mess KS_C_5601-1987, GB2312, Big5, Shift_JIS =back =item Glossary character repertoire, coded character set (CCS), character encoding scheme (CES), charset (in MIME context), EUC, ISO-2022, UCS, UCS-2, Unicode, UTF, UTF-16 =item See Also =item References ECMA, ECMA-035 (eq C<ISO-2022>), IANA, Assigned Charset Names by IANA, ISO, RFC, UC, Unicode Glossary =over 4 =item Other Notable Sites czyborra.com, CJK.inf, Jungshik Shin's Hangul FAQ, debian.org: "Introduction to i18n" =item Offline sources C<CJKV Information Processing> by Ken Lunde =back =back =head2 Encode::Symbol - Symbol Encodings =over 4 =item SYNOPSIS =item ABSTRACT =item DESCRIPTION =item SEE ALSO =back =head2 Encode::TW - Taiwan-based Chinese Encodings =over 4 =item SYNOPSIS =item DESCRIPTION =item NOTES =item BUGS =item SEE ALSO =back =head2 Encode::Unicode -- Various Unicode Transformation Formats =over 4 =item SYNOPSIS =item ABSTRACT L<http://www.unicode.org/glossary/> says:, Quick Reference =item Size, Endianness, and BOM =over 4 =item by size =item by endianness BOM as integer when fetched in network byte order =back =item Surrogate Pairs =item Error Checking =item SEE ALSO =back =head2 Encode::Unicode::UTF7 -- UTF-7 encoding =over 4 =item SYNOPSIS =item ABSTRACT =item In Practice =item SEE ALSO =back =head2 English - use nice English (or awk) names for ugly punctuation variables =over 4 =item SYNOPSIS =item DESCRIPTION =item PERFORMANCE =back =head2 Env - perl module that imports environment variables as scalars or arrays =over 4 =item SYNOPSIS =item DESCRIPTION =item LIMITATIONS =item AUTHOR =back =head2 Errno - System errno constants =over 4 =item SYNOPSIS =item DESCRIPTION =item CAVEATS =item AUTHOR =item COPYRIGHT =back =head2 Exporter - Implements default import method for modules =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item How to Export =item Selecting What to Export =item How to Import C<use YourModule;>, C<use YourModule ();>, C<use YourModule qw(...);> =back =item Advanced Features =over 4 =item Specialised Import Lists =item Exporting Without Using Exporter's import Method =item Exporting Without Inheriting from Exporter =item Module Version Checking =item Managing Unknown Symbols =item Tag Handling Utility Functions =item Generating Combined Tags =item C<AUTOLOAD>ed Constants =back =item Good Practices =over 4 =item Declaring C<@EXPORT_OK> and Friends =item Playing Safe =item What Not to Export =back =item SEE ALSO =item LICENSE =back =head2 Exporter::Heavy - Exporter guts =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 ExtUtils::CBuilder - Compile and link C code for Perl modules =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS new, have_compiler, have_cplusplus, compile, C<object_file>, C<include_dirs>, C<extra_compiler_flags>, C<C++>, link, lib_file, module_name, extra_linker_flags, link_executable, exe_file, object_file, lib_file, exe_file, prelink, need_prelink, extra_link_args_after_prelink =item TO DO =item HISTORY =item SUPPORT =item AUTHOR =item COPYRIGHT =item SEE ALSO =back =head2 ExtUtils::CBuilder::Platform::Windows - Builder class for Windows platforms =over 4 =item DESCRIPTION =item AUTHOR =item SEE ALSO =back =head2 ExtUtils::Command - utilities to replace common UNIX commands in Makefiles etc. =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item FUNCTIONS =back =back cat eqtime rm_rf rm_f touch mv cp chmod mkpath test_f test_d dos2unix =over 4 =item SEE ALSO =item AUTHOR =back =head2 ExtUtils::Command::MM - Commands for the MM's to use in Makefiles =over 4 =item SYNOPSIS =item DESCRIPTION B<test_harness> =back B<pod2man> B<warn_if_old_packlist> B<perllocal_install> B<uninstall> B<test_s> B<cp_nonempty> =head2 ExtUtils::Constant - generate XS code to import C header constants =over 4 =item SYNOPSIS =item DESCRIPTION =item USAGE IV, UV, NV, PV, PVN, SV, YES, NO, UNDEF =item FUNCTIONS =back constant_types XS_constant PACKAGE, TYPES, XS_SUBNAME, C_SUBNAME autoload PACKAGE, VERSION, AUTOLOADER WriteMakefileSnippet WriteConstants ATTRIBUTE =E<gt> VALUE [, ...], NAME, DEFAULT_TYPE, BREAKOUT_AT, NAMES, PROXYSUBS, C_FH, C_FILE, XS_FH, XS_FILE, XS_SUBNAME, C_SUBNAME =over 4 =item AUTHOR =back =head2 ExtUtils::Constant::Base - base class for ExtUtils::Constant objects =over 4 =item SYNOPSIS =item DESCRIPTION =item USAGE =back header memEQ_clause args_hashref dump_names arg_hashref, ITEM.. assign arg_hashref, VALUE.. return_clause arg_hashref, ITEM switch_clause arg_hashref, NAMELEN, ITEMHASH, ITEM.. params WHAT dogfood arg_hashref, ITEM.. normalise_items args, default_type, seen_types, seen_items, ITEM.. C_constant arg_hashref, ITEM.., name, type, value, macro, default, pre, post, def_pre, def_post, utf8, weight =over 4 =item BUGS =item AUTHOR =back =head2 ExtUtils::Constant::Utils - helper functions for ExtUtils::Constant =over 4 =item SYNOPSIS =item DESCRIPTION =item USAGE C_stringify NAME =back perl_stringify NAME =over 4 =item AUTHOR =back =head2 ExtUtils::Constant::XS - generate C code for XS modules' constants. =over 4 =item SYNOPSIS =item DESCRIPTION =item BUGS =item AUTHOR =back =head2 ExtUtils::Embed - Utilities for embedding Perl in C/C++ applications =over 4 =item SYNOPSIS =item DESCRIPTION =item @EXPORT =item FUNCTIONS xsinit(), Examples, ldopts(), Examples, perl_inc(), ccflags(), ccdlflags(), ccopts(), xsi_header(), xsi_protos(@modules), xsi_body(@modules) =item EXAMPLES =item SEE ALSO =item AUTHOR =back =head2 ExtUtils::Install - install files from here to there =over 4 =item SYNOPSIS =item VERSION =back =over 4 =item DESCRIPTION _chmod($$;$), _warnonce(@), _choke(@) =back _move_file_at_boot( $file, $target, $moan ) _unlink_or_rename( $file, $tryhard, $installing ) =over 4 =item Functions _get_install_skip =back _have_write_access _can_write_dir(C<$dir>) _mkpath($dir,$show,$mode,$verbose,$dry_run) _copy($from,$to,$verbose,$dry_run) _chdir($from) B<install> _do_cleanup install_rooted_file( $file ), install_rooted_dir( $dir ) forceunlink( $file, $tryhard ) directory_not_empty( $dir ) B<install_default> I<DISCOURAGED> B<uninstall> inc_uninstall($filepath,$libdir,$verbose,$dry_run,$ignore,$results) run_filter($cmd,$src,$dest) B<pm_to_blib> _autosplit _invokant =over 4 =item ENVIRONMENT B<PERL_INSTALL_ROOT>, B<EU_INSTALL_IGNORE_SKIP>, B<EU_INSTALL_SITE_SKIPFILE>, B<EU_INSTALL_ALWAYS_COPY> =item AUTHOR =item LICENSE =back =head2 ExtUtils::Installed - Inventory management of installed modules =over 4 =item SYNOPSIS =item DESCRIPTION =item USAGE =item METHODS new(), modules(), files(), directories(), directory_tree(), validate(), packlist(), version() =item EXAMPLE =item AUTHOR =back =head2 ExtUtils::Liblist - determine libraries to use and how to use them =over 4 =item SYNOPSIS =item DESCRIPTION For static extensions, For dynamic extensions at build/link time, For dynamic extensions at load time =over 4 =item EXTRALIBS =item LDLOADLIBS and LD_RUN_PATH =item BSLOADLIBS =back =item PORTABILITY =over 4 =item VMS implementation =item Win32 implementation =back =item SEE ALSO =back =head2 ExtUtils::MM - OS adjusted ExtUtils::MakeMaker subclass =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 ExtUtils::MM::Utils - ExtUtils::MM methods without dependency on ExtUtils::MakeMaker =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS maybe_command =back =over 4 =item BUGS =item SEE ALSO =back =head2 ExtUtils::MM_AIX - AIX specific subclass of ExtUtils::MM_Unix =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Overridden methods =back =back =over 4 =item AUTHOR =item SEE ALSO =back =head2 ExtUtils::MM_Any - Platform-agnostic MM methods =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Cross-platform helper methods =back =back =over 4 =item Targets =back =over 4 =item Init methods =back =over 4 =item Tools =back =over 4 =item File::Spec wrappers =back =over 4 =item Misc =back =over 4 =item AUTHOR =back =head2 ExtUtils::MM_BeOS - methods to override UN*X behaviour in ExtUtils::MakeMaker =over 4 =item SYNOPSIS =item DESCRIPTION =back os_flavor init_linker =head2 ExtUtils::MM_Cygwin - methods to override UN*X behaviour in ExtUtils::MakeMaker =over 4 =item SYNOPSIS =item DESCRIPTION os_flavor =back cflags replace_manpage_separator init_linker maybe_command dynamic_lib install =head2 ExtUtils::MM_DOS - DOS specific subclass of ExtUtils::MM_Unix =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Overridden methods os_flavor =back =back B<replace_manpage_separator> xs_static_lib_is_xs =over 4 =item AUTHOR =item SEE ALSO =back =head2 ExtUtils::MM_Darwin - special behaviors for OS X =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Overridden Methods =back =back =head2 ExtUtils::MM_MacOS - once produced Makefiles for MacOS Classic =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 ExtUtils::MM_NW5 - methods to override UN*X behaviour in ExtUtils::MakeMaker =over 4 =item SYNOPSIS =item DESCRIPTION =back os_flavor init_platform, platform_constants static_lib_pure_cmd xs_static_lib_is_xs dynamic_lib =head2 ExtUtils::MM_OS2 - methods to override UN*X behaviour in ExtUtils::MakeMaker =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS init_dist =back init_linker os_flavor xs_static_lib_is_xs =head2 ExtUtils::MM_QNX - QNX specific subclass of ExtUtils::MM_Unix =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Overridden methods =back =back =over 4 =item AUTHOR =item SEE ALSO =back =head2 ExtUtils::MM_UWIN - U/WIN specific subclass of ExtUtils::MM_Unix =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Overridden methods os_flavor =back =back B<replace_manpage_separator> =over 4 =item AUTHOR =item SEE ALSO =back =head2 ExtUtils::MM_Unix - methods used by ExtUtils::MakeMaker =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =back =over 4 =item Methods os_flavor =back c_o (o) xs_obj_opt dbgoutflag cflags (o) const_cccmd (o) const_config (o) const_loadlibs (o) constants (o) depend (o) init_DEST init_dist dist (o) dist_basics (o) dist_ci (o) dist_core (o) B<dist_target> B<tardist_target> B<zipdist_target> B<tarfile_target> zipfile_target uutardist_target shdist_target dlsyms (o) dynamic_bs (o) dynamic_lib (o) xs_dynamic_lib_macros xs_make_dynamic_lib exescan extliblist find_perl fixin force (o) guess_name has_link_code init_dirscan init_MANPODS init_MAN1PODS init_MAN3PODS init_PM init_DIRFILESEP init_main init_tools init_linker init_lib2arch init_PERL init_platform, platform_constants init_PERM init_xs install (o) installbin (o) linkext (o) lsdir macro (o) makeaperl (o) xs_static_lib_is_xs (o) makefile (o) maybe_command needs_linking (o) parse_abstract parse_version pasthru (o) perl_script perldepend (o) pm_to_blib ppd prefixify processPL (o) specify_shell quote_paren replace_manpage_separator cd oneliner quote_literal escape_newlines max_exec_len static (o) xs_make_static_lib static_lib_closures static_lib_fixtures static_lib_pure_cmd staticmake (o) subdir_x (o) subdirs (o) test (o) test_via_harness (override) test_via_script (override) tool_xsubpp (o) all_target top_targets (o) writedoc xs_c (o) xs_cpp (o) xs_o (o) =over 4 =item SEE ALSO =back =head2 ExtUtils::MM_VMS - methods to override UN*X behaviour in ExtUtils::MakeMaker =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Methods always loaded wraplist =back =back =over 4 =item Methods guess_name (override) =back find_perl (override) _fixin_replace_shebang (override) maybe_command (override) pasthru (override) pm_to_blib (override) perl_script (override) replace_manpage_separator init_DEST init_DIRFILESEP init_main (override) init_tools (override) init_platform (override) platform_constants init_VERSION (override) constants (override) special_targets cflags (override) const_cccmd (override) tools_other (override) init_dist (override) c_o (override) xs_c (override) xs_o (override) _xsbuild_replace_macro (override) _xsbuild_value (override) dlsyms (override) xs_obj_opt dynamic_lib (override) xs_make_static_lib (override) static_lib_pure_cmd (override) xs_static_lib_is_xs extra_clean_files zipfile_target, tarfile_target, shdist_target install (override) perldepend (override) makeaperl (override) maketext_filter (override) prefixify (override) cd oneliner B<echo> quote_literal escape_dollarsigns escape_all_dollarsigns escape_newlines max_exec_len init_linker catdir (override), catfile (override) eliminate_macros fixpath os_flavor is_make_type (override) make_type (override) =over 4 =item AUTHOR =back =head2 ExtUtils::MM_VOS - VOS specific subclass of ExtUtils::MM_Unix =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Overridden methods =back =back =over 4 =item AUTHOR =item SEE ALSO =back =head2 ExtUtils::MM_Win32 - methods to override UN*X behaviour in ExtUtils::MakeMaker =over 4 =item SYNOPSIS =item DESCRIPTION =back =over 4 =item Overridden methods B<dlsyms> =back xs_dlsyms_ext replace_manpage_separator B<maybe_command> B<init_DIRFILESEP> init_tools init_others init_platform, platform_constants specify_shell constants special_targets static_lib_pure_cmd dynamic_lib extra_clean_files init_linker perl_script quote_dep xs_obj_opt pasthru arch_check (override) oneliner cd max_exec_len os_flavor dbgoutflag cflags make_type =head2 ExtUtils::MM_Win95 - method to customize MakeMaker for Win9X =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Overridden methods max_exec_len =back =back os_flavor =over 4 =item AUTHOR =back =head2 ExtUtils::MY - ExtUtils::MakeMaker subclass for customization =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 ExtUtils::MakeMaker - Create a module Makefile =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item How To Write A Makefile.PL =item Default Makefile Behaviour =item make test =item make testdb =item make install =item INSTALL_BASE =item PREFIX and LIB attribute =item AFS users =item Static Linking of a new Perl Binary =item Determination of Perl Library and Installation Locations =item Which architecture dependent directory? =item Using Attributes and Parameters ABSTRACT, ABSTRACT_FROM, AUTHOR, BINARY_LOCATION, BUILD_REQUIRES, C, CCFLAGS, CONFIG, CONFIGURE, CONFIGURE_REQUIRES, DEFINE, DESTDIR, DIR, DISTNAME, DISTVNAME, DLEXT, DL_FUNCS, DL_VARS, EXCLUDE_EXT, EXE_FILES, FIRST_MAKEFILE, FULLPERL, FULLPERLRUN, FULLPERLRUNINST, FUNCLIST, H, IMPORTS, INC, INCLUDE_EXT, INSTALLARCHLIB, INSTALLBIN, INSTALLDIRS, INSTALLMAN1DIR, INSTALLMAN3DIR, INSTALLPRIVLIB, INSTALLSCRIPT, INSTALLSITEARCH, INSTALLSITEBIN, INSTALLSITELIB, INSTALLSITEMAN1DIR, INSTALLSITEMAN3DIR, INSTALLSITESCRIPT, INSTALLVENDORARCH, INSTALLVENDORBIN, INSTALLVENDORLIB, INSTALLVENDORMAN1DIR, INSTALLVENDORMAN3DIR, INSTALLVENDORSCRIPT, INST_ARCHLIB, INST_BIN, INST_LIB, INST_MAN1DIR, INST_MAN3DIR, INST_SCRIPT, LD, LDDLFLAGS, LDFROM, LIB, LIBPERL_A, LIBS, LICENSE, LINKTYPE, MAGICXS, MAKE, MAKEAPERL, MAKEFILE_OLD, MAN1PODS, MAN3PODS, MAP_TARGET, META_ADD, META_MERGE, MIN_PERL_VERSION, MYEXTLIB, NAME, NEEDS_LINKING, NOECHO, NORECURS, NO_META, NO_MYMETA, NO_PACKLIST, NO_PERLLOCAL, NO_VC, OBJECT, OPTIMIZE, PERL, PERL_CORE, PERLMAINCC, PERL_ARCHLIB, PERL_LIB, PERL_MALLOC_OK, PERLPREFIX, PERLRUN, PERLRUNINST, PERL_SRC, PERM_DIR, PERM_RW, PERM_RWX, PL_FILES, PM, PMLIBDIRS, PM_FILTER, POLLUTE, PPM_INSTALL_EXEC, PPM_INSTALL_SCRIPT, PPM_UNINSTALL_EXEC, PPM_UNINSTALL_SCRIPT, PREFIX, PREREQ_FATAL, PREREQ_PM, PREREQ_PRINT, PRINT_PREREQ, SITEPREFIX, SIGN, SKIP, TEST_REQUIRES, TYPEMAPS, USE_MM_LD_RUN_PATH, VENDORPREFIX, VERBINST, VERSION, VERSION_FROM, VERSION_SYM, XS, XSBUILD, XSMULTI, XSOPT, XSPROTOARG, XS_VERSION =item Additional lowercase attributes clean, depend, dist, dynamic_lib, linkext, macro, postamble, realclean, test, tool_autosplit =item Overriding MakeMaker Methods =item The End Of Cargo Cult Programming C<< MAN3PODS => ' ' >> =item Hintsfile support =item Distribution Support make distcheck, make skipcheck, make distclean, make veryclean, make manifest, make distdir, make disttest, make tardist, make dist, make uutardist, make shdist, make zipdist, make ci =item Module Meta-Data (META and MYMETA) =item Disabling an extension =item Other Handy Functions prompt, os_unsupported =item Supported versions of Perl =back =item ENVIRONMENT PERL_MM_OPT, PERL_MM_USE_DEFAULT, PERL_CORE =item SEE ALSO =item AUTHORS =item LICENSE =back =head2 ExtUtils::MakeMaker::Config - Wrapper around Config.pm =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 ExtUtils::MakeMaker::FAQ - Frequently Asked Questions About MakeMaker =over 4 =item DESCRIPTION =over 4 =item Module Installation How do I install a module into my home directory?, How do I get MakeMaker and Module::Build to install to the same place?, How do I keep from installing man pages?, How do I use a module without installing it?, How can I organize tests into subdirectories and have them run?, PREFIX vs INSTALL_BASE from Module::Build::Cookbook, Generating *.pm files with substitutions eg of $VERSION =item Common errors and problems "No rule to make target `/usr/lib/perl5/CORE/config.h', needed by `Makefile'" =item Philosophy and History Why not just use <insert other build config tool here>?, What is Module::Build and how does it relate to MakeMaker?, pure perl. no make, no shell commands, easier to customize, cleaner internals, less cruft =item Module Writing How do I keep my $VERSION up to date without resetting it manually?, What's this F<META.yml> thing and how did it get in my F<MANIFEST>?!, How do I delete everything not in my F<MANIFEST>?, Which tar should I use on Windows?, Which zip should I use on Windows for '[ndg]make zipdist'? =item XS How do I prevent "object version X.XX does not match bootstrap parameter Y.YY" errors?, How do I make two or more XS files coexist in the same directory?, XSMULTI, Separate directories, Bootstrapping =back =item DESIGN =over 4 =item MakeMaker object hierarchy (simplified) =item MakeMaker object hierarchy (real) =item The MM_* hierarchy =back =item PATCHING make a pull request on the MakeMaker github repository, raise a issue on the MakeMaker github repository, file an RT ticket, email makemaker@perl.org =item AUTHOR =item SEE ALSO =back =head2 ExtUtils::MakeMaker::Locale - bundled Encode::Locale =over 4 =item SYNOPSIS =item DESCRIPTION decode_argv( ), decode_argv( Encode::FB_CROAK ), env( $uni_key ), env( $uni_key => $uni_value ), reinit( ), reinit( $encoding ), $ENCODING_LOCALE, $ENCODING_LOCALE_FS, $ENCODING_CONSOLE_IN, $ENCODING_CONSOLE_OUT =item NOTES =over 4 =item Windows =item Mac OS X =item POSIX (Linux and other Unixes) =back =item SEE ALSO =item AUTHOR =back =head2 ExtUtils::MakeMaker::Tutorial - Writing a module with MakeMaker =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item The Mantra =item The Layout Makefile.PL, MANIFEST, lib/, t/, Changes, README, INSTALL, MANIFEST.SKIP, bin/ =back =item SEE ALSO =back =head2 ExtUtils::Manifest - Utilities to write and check a MANIFEST file =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item FUNCTIONS =over 4 =item mkmanifest =back =back =over 4 =item manifind =back =over 4 =item manicheck =back =over 4 =item filecheck =back =over 4 =item fullcheck =back =over 4 =item skipcheck =back =over 4 =item maniread =back =over 4 =item maniskip =back =over 4 =item manicopy =back =over 4 =item maniadd =back =over 4 =item MANIFEST =item MANIFEST.SKIP #!include_default, #!include /Path/to/another/manifest.skip =item EXPORT_OK =item GLOBAL VARIABLES =back =over 4 =item DIAGNOSTICS C<Not in MANIFEST:> I<file>, C<Skipping> I<file>, C<No such file:> I<file>, C<MANIFEST:> I<$!>, C<Added to MANIFEST:> I<file> =item ENVIRONMENT B<PERL_MM_MANIFEST_DEBUG> =item SEE ALSO =item AUTHOR =item COPYRIGHT AND LICENSE =back =head2 ExtUtils::Miniperl - write the C code for miniperlmain.c and perlmain.c =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =back =head2 ExtUtils::Mkbootstrap - make a bootstrap file for use by DynaLoader =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 ExtUtils::Mksymlists - write linker options files for dynamic extension =over 4 =item SYNOPSIS =item DESCRIPTION DLBASE, DL_FUNCS, DL_VARS, FILE, FUNCLIST, IMPORTS, NAME =item AUTHOR =item REVISION mkfh() =back __find_relocations =head2 ExtUtils::Packlist - manage .packlist files =over 4 =item SYNOPSIS =item DESCRIPTION =item USAGE =item FUNCTIONS new(), read(), write(), validate(), packlist_file() =item EXAMPLE =item AUTHOR =back =head2 ExtUtils::ParseXS - converts Perl XS code into C code =over 4 =item SYNOPSIS =item DESCRIPTION =item EXPORT =item METHODS $pxs->new(), $pxs->process_file(), B<C++>, B<hiertype>, B<except>, B<typemap>, B<prototypes>, B<versioncheck>, B<linenumbers>, B<optimize>, B<inout>, B<argtypes>, B<s>, $pxs->report_error_count() =item AUTHOR =item COPYRIGHT =item SEE ALSO =back =head2 ExtUtils::ParseXS::Constants - Initialization values for some globals =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 ExtUtils::ParseXS::Eval - Clean package to evaluate code in =over 4 =item SYNOPSIS =item SUBROUTINES =over 4 =item $pxs->eval_output_typemap_code($typemapcode, $other_hashref) =back =back =over 4 =item $pxs->eval_input_typemap_code($typemapcode, $other_hashref) =back =over 4 =item TODO =back =head2 ExtUtils::ParseXS::Utilities - Subroutines used with ExtUtils::ParseXS =over 4 =item SYNOPSIS =item SUBROUTINES =over 4 =item C<standard_typemap_locations()> Purpose, Arguments, Return Value =back =back =over 4 =item C<trim_whitespace()> Purpose, Argument, Return Value =back =over 4 =item C<C_string()> Purpose, Arguments, Return Value =back =over 4 =item C<valid_proto_string()> Purpose, Arguments, Return Value =back =over 4 =item C<process_typemaps()> Purpose, Arguments, Return Value =back =over 4 =item C<map_type()> Purpose, Arguments, Return Value =back =over 4 =item C<standard_XS_defs()> Purpose, Arguments, Return Value =back =over 4 =item C<assign_func_args()> Purpose, Arguments, Return Value =back =over 4 =item C<analyze_preprocessor_statements()> Purpose, Arguments, Return Value =back =over 4 =item C<set_cond()> Purpose, Arguments, Return Value =back =over 4 =item C<current_line_number()> Purpose, Arguments, Return Value =back =over 4 =item C<Warn()> Purpose, Arguments, Return Value =back =over 4 =item C<blurt()> Purpose, Arguments, Return Value =back =over 4 =item C<death()> Purpose, Arguments, Return Value =back =over 4 =item C<check_conditional_preprocessor_statements()> Purpose, Arguments, Return Value =back =over 4 =item C<escape_file_for_line_directive()> Purpose, Arguments, Return Value =back =over 4 =item C<report_typemap_failure> Purpose, Arguments, Return Value =back =head2 ExtUtils::Typemaps - Read/Write/Modify Perl/XS typemap files =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =back =over 4 =item new =back =over 4 =item file =back =over 4 =item add_typemap =back =over 4 =item add_inputmap =back =over 4 =item add_outputmap =back =over 4 =item add_string =back =over 4 =item remove_typemap =back =over 4 =item remove_inputmap =back =over 4 =item remove_inputmap =back =over 4 =item get_typemap =back =over 4 =item get_inputmap =back =over 4 =item get_outputmap =back =over 4 =item write =back =over 4 =item as_string =back =over 4 =item as_embedded_typemap =back =over 4 =item merge =back =over 4 =item is_empty =back =over 4 =item list_mapped_ctypes =back =over 4 =item _get_typemap_hash =back =over 4 =item _get_inputmap_hash =back =over 4 =item _get_outputmap_hash =back =over 4 =item _get_prototype_hash =back =over 4 =item clone =back =over 4 =item tidy_type =back =over 4 =item CAVEATS =item SEE ALSO =item AUTHOR =item COPYRIGHT & LICENSE =back =head2 ExtUtils::Typemaps::Cmd - Quick commands for handling typemaps =over 4 =item SYNOPSIS =item DESCRIPTION =item EXPORTED FUNCTIONS =over 4 =item embeddable_typemap =back =item SEE ALSO =item AUTHOR =item COPYRIGHT & LICENSE =back =head2 ExtUtils::Typemaps::InputMap - Entry in the INPUT section of a typemap =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =back =over 4 =item new =back =over 4 =item code =back =over 4 =item xstype =back =over 4 =item cleaned_code =back =over 4 =item SEE ALSO =item AUTHOR =item COPYRIGHT & LICENSE =back =head2 ExtUtils::Typemaps::OutputMap - Entry in the OUTPUT section of a typemap =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =back =over 4 =item new =back =over 4 =item code =back =over 4 =item xstype =back =over 4 =item cleaned_code =back =over 4 =item targetable =back =over 4 =item SEE ALSO =item AUTHOR =item COPYRIGHT & LICENSE =back =head2 ExtUtils::Typemaps::Type - Entry in the TYPEMAP section of a typemap =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =back =over 4 =item new =back =over 4 =item proto =back =over 4 =item xstype =back =over 4 =item ctype =back =over 4 =item tidy_ctype =back =over 4 =item SEE ALSO =item AUTHOR =item COPYRIGHT & LICENSE =back =head2 ExtUtils::testlib - add blib/* directories to @INC =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 Fatal - Replace functions with equivalents which succeed or die =over 4 =item SYNOPSIS =item BEST PRACTICE =item DESCRIPTION =item DIAGNOSTICS Bad subroutine name for Fatal: %s, %s is not a Perl subroutine, %s is neither a builtin, nor a Perl subroutine, Cannot make the non-overridable %s fatal, Internal error: %s =item BUGS =item AUTHOR =item LICENSE =item SEE ALSO =back =head2 Fcntl - load the C Fcntl.h defines =over 4 =item SYNOPSIS =item DESCRIPTION =item NOTE =item EXPORTED SYMBOLS =back =head2 File::Basename - Parse file paths into directory, filename and suffix. =over 4 =item SYNOPSIS =item DESCRIPTION =back C<fileparse> X<fileparse> C<basename> X<basename> X<filename> C<dirname> X<dirname> C<fileparse_set_fstype> X<filesystem> =over 4 =item SEE ALSO =back =head2 File::Compare - Compare files or filehandles =over 4 =item SYNOPSIS =item DESCRIPTION =item RETURN =item AUTHOR =back =head2 File::Copy - Copy files or filehandles =over 4 =item SYNOPSIS =item DESCRIPTION copy X<copy> X<cp>, move X<move> X<mv> X<rename>, syscopy X<syscopy>, rmscopy($from,$to[,$date_flag]) X<rmscopy> =item RETURN =item NOTES =item AUTHOR =back =head2 File::DosGlob - DOS like globbing and then some =over 4 =item SYNOPSIS =item DESCRIPTION =item EXPORTS (by request only) =item BUGS =item AUTHOR =item HISTORY =item SEE ALSO =back =head2 File::Fetch - A generic file fetching mechanism =over 4 =item SYNOPSIS =item DESCRIPTION =item ACCESSORS $ff->uri, $ff->scheme, $ff->host, $ff->vol, $ff->share, $ff->path, $ff->file, $ff->file_default =back $ff->output_file =over 4 =item METHODS =over 4 =item $ff = File::Fetch->new( uri => 'http://some.where.com/dir/file.txt' ); =back =back =over 4 =item $where = $ff->fetch( [to => /my/output/dir/ | \$scalar] ) =back =over 4 =item $ff->error([BOOL]) =back =over 4 =item HOW IT WORKS =item GLOBAL VARIABLES =over 4 =item $File::Fetch::FROM_EMAIL =item $File::Fetch::USER_AGENT =item $File::Fetch::FTP_PASSIVE =item $File::Fetch::TIMEOUT =item $File::Fetch::WARN =item $File::Fetch::DEBUG =item $File::Fetch::BLACKLIST =item $File::Fetch::METHOD_FAIL =back =item MAPPING =item FREQUENTLY ASKED QUESTIONS =over 4 =item So how do I use a proxy with File::Fetch? =item I used 'lynx' to fetch a file, but its contents is all wrong! =item Files I'm trying to fetch have reserved characters or non-ASCII characters in them. What do I do? =back =item TODO Implement $PREFER_BIN =item BUG REPORTS =item AUTHOR =item COPYRIGHT =back =head2 File::Find - Traverse a directory tree. =over 4 =item SYNOPSIS =item DESCRIPTION B<find>, B<finddepth> =over 4 =item %options C<wanted>, C<bydepth>, C<preprocess>, C<postprocess>, C<follow>, C<follow_fast>, C<follow_skip>, C<dangling_symlinks>, C<no_chdir>, C<untaint>, C<untaint_pattern>, C<untaint_skip> =item The wanted function C<$File::Find::dir> is the current directory name,, C<$_> is the current filename within that directory, C<$File::Find::name> is the complete pathname to the file =back =item WARNINGS =item CAVEAT $dont_use_nlink, symlinks =item BUGS AND CAVEATS =item HISTORY =item SEE ALSO =back =head2 File::Glob - Perl extension for BSD glob routine =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item META CHARACTERS =item EXPORTS =item POSIX FLAGS C<GLOB_ERR>, C<GLOB_LIMIT>, C<GLOB_MARK>, C<GLOB_NOCASE>, C<GLOB_NOCHECK>, C<GLOB_NOSORT>, C<GLOB_BRACE>, C<GLOB_NOMAGIC>, C<GLOB_QUOTE>, C<GLOB_TILDE>, C<GLOB_CSH>, C<GLOB_ALPHASORT> =back =item DIAGNOSTICS C<GLOB_NOSPACE>, C<GLOB_ABEND> =item NOTES =item SEE ALSO =item AUTHOR =back =head2 File::GlobMapper - Extend File Glob to Allow Input and Output Files =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Behind The Scenes =item Limitations =item Input File Glob B<~>, B<~user>, B<.>, B<*>, B<?>, B<\>, B<[]>, B<{,}>, B<()> =item Output File Glob "*", #1 =item Returned Data =back =item EXAMPLES =over 4 =item A Rename script =item A few example globmaps =back =item SEE ALSO =item AUTHOR =item COPYRIGHT AND LICENSE =back =head2 File::Path - Create or remove directory trees =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION make_path( $dir1, $dir2, .... ), make_path( $dir1, $dir2, ...., \%opts ), mode => $num, chmod => $num, verbose => $bool, error => \$err, owner => $owner, user => $owner, uid => $owner, group => $group, mkpath( $dir ), mkpath( $dir, $verbose, $mode ), mkpath( [$dir1, $dir2,...], $verbose, $mode ), mkpath( $dir1, $dir2,..., \%opt ), remove_tree( $dir1, $dir2, .... ), remove_tree( $dir1, $dir2, ...., \%opts ), verbose => $bool, safe => $bool, keep_root => $bool, result => \$res, error => \$err, rmtree( $dir ), rmtree( $dir, $verbose, $safe ), rmtree( [$dir1, $dir2,...], $verbose, $safe ), rmtree( $dir1, $dir2,..., \%opt ) =over 4 =item ERROR HANDLING B<NOTE:> =item NOTES L<http://cve.circl.lu/cve/CVE-2004-0452>, L<http://cve.circl.lu/cve/CVE-2005-0448> =back =item DIAGNOSTICS mkdir [path]: [errmsg] (SEVERE), No root path(s) specified, No such file or directory, cannot fetch initial working directory: [errmsg], cannot stat initial working directory: [errmsg], cannot chdir to [dir]: [errmsg], directory [dir] changed before chdir, expected dev=[n] ino=[n], actual dev=[n] ino=[n], aborting. (FATAL), cannot make directory [dir] read+writeable: [errmsg], cannot read [dir]: [errmsg], cannot reset chmod [dir]: [errmsg], cannot remove [dir] when cwd is [dir], cannot chdir to [parent-dir] from [child-dir]: [errmsg], aborting. (FATAL), cannot stat prior working directory [dir]: [errmsg], aborting. (FATAL), previous directory [parent-dir] changed before entering [child-dir], expected dev=[n] ino=[n], actual dev=[n] ino=[n], aborting. (FATAL), cannot make directory [dir] writeable: [errmsg], cannot remove directory [dir]: [errmsg], cannot restore permissions of [dir] to [0nnn]: [errmsg], cannot make file [file] writeable: [errmsg], cannot unlink file [file]: [errmsg], cannot restore permissions of [file] to [0nnn]: [errmsg], unable to map [owner] to a uid, ownership not changed");, unable to map [group] to a gid, group ownership not changed =item SEE ALSO =item BUGS AND LIMITATIONS =over 4 =item MULTITHREADED APPLICATIONS =item NFS Mount Points =item REPORTING BUGS =back =item ACKNOWLEDGEMENTS =item AUTHORS =item CONTRIBUTORS <F<bulkdd@cpan.org>>, Charlie Gonzalez <F<itcharlie@cpan.org>>, Craig A. Berry <F<craigberry@mac.com>>, James E Keenan <F<jkeenan@cpan.org>>, John Lightsey <F<john@perlsec.org>>, Nigel Horne <F<njh@bandsman.co.uk>>, Richard Elberger <F<riche@cpan.org>>, Ryan Yee <F<ryee@cpan.org>>, Skye Shaw <F<shaw@cpan.org>>, Tom Lutz <F<tommylutz@gmail.com>>, Will Sheppard <F<willsheppard@github>> =item COPYRIGHT =item LICENSE =back =head2 File::Spec - portably perform operations on file names =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS canonpath X<canonpath>, catdir X<catdir>, catfile X<catfile>, curdir X<curdir>, devnull X<devnull>, rootdir X<rootdir>, tmpdir X<tmpdir>, updir X<updir>, no_upwards, case_tolerant, file_name_is_absolute, path X<path>, join X<join, path>, splitpath X<splitpath> X<split, path>, splitdir X<splitdir> X<split, dir>, catpath(), abs2rel X<abs2rel> X<absolute, path> X<relative, path>, rel2abs() X<rel2abs> X<absolute, path> X<relative, path> =item SEE ALSO =item AUTHOR =item COPYRIGHT =back =head2 File::Spec::AmigaOS - File::Spec for AmigaOS =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS tmpdir =back file_name_is_absolute =head2 File::Spec::Cygwin - methods for Cygwin file specs =over 4 =item SYNOPSIS =item DESCRIPTION =back canonpath file_name_is_absolute tmpdir (override) case_tolerant =over 4 =item COPYRIGHT =back =head2 File::Spec::Epoc - methods for Epoc file specs =over 4 =item SYNOPSIS =item DESCRIPTION =back canonpath() =over 4 =item AUTHOR =item COPYRIGHT =item SEE ALSO =back =head2 File::Spec::Functions - portably perform operations on file names =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Exports =back =item COPYRIGHT =item SEE ALSO =back =head2 File::Spec::Mac - File::Spec for Mac OS (Classic) =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS canonpath =back catdir() catfile curdir devnull rootdir tmpdir updir file_name_is_absolute path splitpath splitdir catpath abs2rel rel2abs =over 4 =item AUTHORS =item COPYRIGHT =item SEE ALSO =back =head2 File::Spec::OS2 - methods for OS/2 file specs =over 4 =item SYNOPSIS =item DESCRIPTION tmpdir, splitpath =item COPYRIGHT =back =head2 File::Spec::Unix - File::Spec for Unix, base for other File::Spec modules =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS canonpath() =back catdir() catfile curdir devnull rootdir tmpdir updir no_upwards case_tolerant file_name_is_absolute path join splitpath splitdir catpath() abs2rel rel2abs() =over 4 =item COPYRIGHT =item SEE ALSO =back =head2 File::Spec::VMS - methods for VMS file specs =over 4 =item SYNOPSIS =item DESCRIPTION =back canonpath (override) catdir (override) catfile (override) curdir (override) devnull (override) rootdir (override) tmpdir (override) updir (override) case_tolerant (override) path (override) file_name_is_absolute (override) splitpath (override) splitdir (override) catpath (override) abs2rel (override) rel2abs (override) =over 4 =item COPYRIGHT =item SEE ALSO =back =head2 File::Spec::Win32 - methods for Win32 file specs =over 4 =item SYNOPSIS =item DESCRIPTION devnull =back tmpdir case_tolerant file_name_is_absolute catfile canonpath splitpath splitdir catpath =over 4 =item Note For File::Spec::Win32 Maintainers =back =over 4 =item COPYRIGHT =item SEE ALSO =back =head2 File::Temp - return name and handle of a temporary file safely =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item PORTABILITY =item OBJECT-ORIENTED INTERFACE B<new>, B<newdir>, B<filename>, B<dirname>, B<unlink_on_destroy>, B<DESTROY> =item FUNCTIONS B<tempfile>, B<tempdir> =item MKTEMP FUNCTIONS B<mkstemp>, B<mkstemps>, B<mkdtemp>, B<mktemp> =item POSIX FUNCTIONS B<tmpnam>, B<tmpfile> =item ADDITIONAL FUNCTIONS B<tempnam> =item UTILITY FUNCTIONS B<unlink0>, B<cmpstat>, B<unlink1>, B<cleanup> =item PACKAGE VARIABLES B<safe_level>, STANDARD, MEDIUM, HIGH, TopSystemUID, B<$KEEP_ALL>, B<$DEBUG> =item WARNING =over 4 =item Temporary files and NFS =item Forking =item Directory removal =item Taint mode =item BINMODE =back =item HISTORY =item SEE ALSO =item SUPPORT =item AUTHOR =item CONTRIBUTORS =item COPYRIGHT AND LICENSE =back =head2 File::stat - by-name interface to Perl's built-in stat() functions =over 4 =item SYNOPSIS =item DESCRIPTION =item BUGS =item ERRORS -%s is not implemented on a File::stat object =item WARNINGS File::stat ignores use filetest 'access', File::stat ignores VMS ACLs =item NOTE =item AUTHOR =back =head2 FileCache - keep more files open than the system permits =over 4 =item SYNOPSIS =item DESCRIPTION cacheout EXPR, cacheout MODE, EXPR =item CAVEATS =item BUGS =back =head2 FileHandle - supply object methods for filehandles =over 4 =item SYNOPSIS =item DESCRIPTION $fh->print, $fh->printf, $fh->getline, $fh->getlines =item SEE ALSO =back =head2 Filter::Simple - Simplified source filtering =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item The Problem =item A Solution =item Disabling or changing <no> behaviour =item All-in-one interface =item Filtering only specific components of source code C<"code">, C<"code_no_comments">, C<"executable">, C<"executable_no_comments">, C<"quotelike">, C<"string">, C<"regex">, C<"all"> =item Filtering only the code parts of source code =item Using Filter::Simple with an explicit C<import> subroutine =item Using Filter::Simple and Exporter together =item How it works =back =item AUTHOR =item CONTACT =item COPYRIGHT AND LICENSE =back =head2 Filter::Util::Call - Perl Source Filter Utility Module =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item B<use Filter::Util::Call> =item B<import()> =item B<filter_add()> =item B<filter() and anonymous sub> B<$_>, B<$status>, B<filter_read> and B<filter_read_exact>, B<filter_del>, I<real_import>, I<unimport()> =back =item LIMITATIONS __DATA__ is ignored, Max. codesize limited to 32-bit =item EXAMPLES =over 4 =item Example 1: A simple filter. =item Example 2: Using the context =item Example 3: Using the context within the filter =item Example 4: Using filter_del =back =item Filter::Simple =item AUTHOR =item DATE =item LICENSE =back =head2 FindBin - Locate directory of original perl script =over 4 =item SYNOPSIS =item DESCRIPTION =item EXPORTABLE VARIABLES =item KNOWN ISSUES =item AUTHORS =item COPYRIGHT =back =head2 GDBM_File - Perl5 access to the gdbm library. =over 4 =item SYNOPSIS =item DESCRIPTION =item AVAILABILITY =item SECURITY AND PORTABILITY =item BUGS =item SEE ALSO =back =head2 Getopt::Long - Extended processing of command line options =over 4 =item SYNOPSIS =item DESCRIPTION =item Command Line Options, an Introduction =item Getting Started with Getopt::Long =over 4 =item Simple options =item A little bit less simple options =item Mixing command line option with other arguments =item Options with values =item Options with multiple values =item Options with hash values =item User-defined subroutines to handle options =item Options with multiple names =item Case and abbreviations =item Summary of Option Specifications !, +, s, i, o, f, : I<type> [ I<desttype> ], : I<number> [ I<desttype> ], : + [ I<desttype> ] =back =item Advanced Possibilities =over 4 =item Object oriented interface =item Thread Safety =item Documentation and help texts =item Parsing options from an arbitrary array =item Parsing options from an arbitrary string =item Storing options values in a hash =item Bundling =item The lonesome dash =item Argument callback =back =item Configuring Getopt::Long default, posix_default, auto_abbrev, getopt_compat, gnu_compat, gnu_getopt, require_order, permute, bundling (default: disabled), bundling_override (default: disabled), ignore_case (default: enabled), ignore_case_always (default: disabled), auto_version (default:disabled), auto_help (default:disabled), pass_through (default: disabled), prefix, prefix_pattern, long_prefix_pattern, debug (default: disabled) =item Exportable Methods VersionMessage, C<-message>, C<-msg>, C<-exitval>, C<-output>, HelpMessage =item Return values and Errors =item Legacy =over 4 =item Default destinations =item Alternative option starters =item Configuration variables =back =item Tips and Techniques =over 4 =item Pushing multiple values in a hash option =back =item Troubleshooting =over 4 =item GetOptions does not return a false result when an option is not supplied =item GetOptions does not split the command line correctly =item Undefined subroutine &main::GetOptions called =item How do I put a "-?" option into a Getopt::Long? =back =item AUTHOR =item COPYRIGHT AND DISCLAIMER =back =head2 Getopt::Std - Process single-character switches with switch clustering =over 4 =item SYNOPSIS =item DESCRIPTION =item C<--help> and C<--version> =back =head2 HTTP::Tiny - A small, simple, correct HTTP/1.1 client =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item new =item get|head|put|post|delete =item post_form =item mirror =item request =item www_form_urlencode =item can_ssl =item connected =back =item SSL SUPPORT =item PROXY SUPPORT =item LIMITATIONS =item SEE ALSO =item SUPPORT =over 4 =item Bugs / Feature Requests =item Source Code =back =item AUTHORS =item CONTRIBUTORS =item COPYRIGHT AND LICENSE =back =head2 Hash::Util - A selection of general-utility hash subroutines =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Restricted hashes B<lock_keys>, B<unlock_keys> =back =back B<lock_keys_plus> B<lock_value>, B<unlock_value> B<lock_hash>, B<unlock_hash> B<lock_hash_recurse>, B<unlock_hash_recurse> B<hashref_locked>, B<hash_locked> B<hashref_unlocked>, B<hash_unlocked> B<legal_keys>, B<hidden_keys>, B<all_keys>, B<hash_seed>, B<hash_value>, B<bucket_info>, B<bucket_stats>, B<bucket_array> B<bucket_stats_formatted> B<hv_store>, B<hash_traversal_mask>, B<bucket_ratio>, B<used_buckets>, B<num_buckets> =over 4 =item Operating on references to hashes. lock_ref_keys, unlock_ref_keys, lock_ref_keys_plus, lock_ref_value, unlock_ref_value, lock_hashref, unlock_hashref, lock_hashref_recurse, unlock_hashref_recurse, hash_ref_unlocked, legal_ref_keys, hidden_ref_keys =back =over 4 =item CAVEATS =item BUGS =item AUTHOR =item SEE ALSO =back =head2 Hash::Util::FieldHash - Support for Inside-Out Classes =over 4 =item SYNOPSIS =item FUNCTIONS id, id_2obj, register, idhash, idhashes, fieldhash, fieldhashes =item DESCRIPTION =over 4 =item The Inside-out Technique =item Problems of Inside-out =item Solutions =item More Problems =item The Generic Object =item How to use Field Hashes =item Garbage-Collected Hashes =back =item EXAMPLES C<init()>, C<first()>, C<last()>, C<name()>, C<Name_hash>, C<Name_id>, C<Name_idhash>, C<Name_id_reg>, C<Name_idhash_reg>, C<Name_fieldhash> =over 4 =item Example 1 =item Example 2 =back =item GUTS =over 4 =item The C<PERL_MAGIC_uvar> interface for hashes =item Weakrefs call uvar magic =item How field hashes work =item Internal function Hash::Util::FieldHash::_fieldhash =back =item AUTHOR =item COPYRIGHT AND LICENSE =back =head2 I18N::Collate - compare 8-bit scalar data according to the current locale =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 I18N::LangTags - functions for dealing with RFC3066-style language tags =over 4 =item SYNOPSIS =item DESCRIPTION =back the function is_language_tag($lang1) the function extract_language_tags($whatever) the function same_language_tag($lang1, $lang2) the function similarity_language_tag($lang1, $lang2) the function is_dialect_of($lang1, $lang2) the function super_languages($lang1) the function locale2language_tag($locale_identifier) the function encode_language_tag($lang1) the function alternate_language_tags($lang1) the function @langs = panic_languages(@accept_languages) the function implicate_supers( ...languages... ), the function implicate_supers_strictly( ...languages... ) =over 4 =item ABOUT LOWERCASING =item ABOUT UNICODE PLAINTEXT LANGUAGE TAGS =item SEE ALSO =item COPYRIGHT =item AUTHOR =back =head2 I18N::LangTags::Detect - detect the user's language preferences =over 4 =item SYNOPSIS =item DESCRIPTION =item FUNCTIONS =item ENVIRONMENT =item SEE ALSO =item COPYRIGHT =item AUTHOR =back =head2 I18N::LangTags::List -- tags and names for human languages =over 4 =item SYNOPSIS =item DESCRIPTION =item ABOUT LANGUAGE TAGS =item LIST OF LANGUAGES {ab} : Abkhazian, {ace} : Achinese, {ach} : Acoli, {ada} : Adangme, {ady} : Adyghe, {aa} : Afar, {afh} : Afrihili, {af} : Afrikaans, [{afa} : Afro-Asiatic (Other)], {ak} : Akan, {akk} : Akkadian, {sq} : Albanian, {ale} : Aleut, [{alg} : Algonquian languages], [{tut} : Altaic (Other)], {am} : Amharic, {i-ami} : Ami, [{apa} : Apache languages], {ar} : Arabic, {arc} : Aramaic, {arp} : Arapaho, {arn} : Araucanian, {arw} : Arawak, {hy} : Armenian, {an} : Aragonese, [{art} : Artificial (Other)], {ast} : Asturian, {as} : Assamese, [{ath} : Athapascan languages], [{aus} : Australian languages], [{map} : Austronesian (Other)], {av} : Avaric, {ae} : Avestan, {awa} : Awadhi, {ay} : Aymara, {az} : Azerbaijani, {ban} : Balinese, [{bat} : Baltic (Other)], {bal} : Baluchi, {bm} : Bambara, [{bai} : Bamileke languages], {bad} : Banda, [{bnt} : Bantu (Other)], {bas} : Basa, {ba} : Bashkir, {eu} : Basque, {btk} : Batak (Indonesia), {bej} : Beja, {be} : Belarusian, {bem} : Bemba, {bn} : Bengali, [{ber} : Berber (Other)], {bho} : Bhojpuri, {bh} : Bihari, {bik} : Bikol, {bin} : Bini, {bi} : Bislama, {bs} : Bosnian, {bra} : Braj, {br} : Breton, {bug} : Buginese, {bg} : Bulgarian, {i-bnn} : Bunun, {bua} : Buriat, {my} : Burmese, {cad} : Caddo, {car} : Carib, {ca} : Catalan, [{cau} : Caucasian (Other)], {ceb} : Cebuano, [{cel} : Celtic (Other)], [{cai} : Central American Indian (Other)], {chg} : Chagatai, [{cmc} : Chamic languages], {ch} : Chamorro, {ce} : Chechen, {chr} : Cherokee, {chy} : Cheyenne, {chb} : Chibcha, {ny} : Chichewa, {zh} : Chinese, {chn} : Chinook Jargon, {chp} : Chipewyan, {cho} : Choctaw, {cu} : Church Slavic, {chk} : Chuukese, {cv} : Chuvash, {cop} : Coptic, {kw} : Cornish, {co} : Corsican, {cr} : Cree, {mus} : Creek, [{cpe} : English-based Creoles and pidgins (Other)], [{cpf} : French-based Creoles and pidgins (Other)], [{cpp} : Portuguese-based Creoles and pidgins (Other)], [{crp} : Creoles and pidgins (Other)], {hr} : Croatian, [{cus} : Cushitic (Other)], {cs} : Czech, {dak} : Dakota, {da} : Danish, {dar} : Dargwa, {day} : Dayak, {i-default} : Default (Fallthru) Language, {del} : Delaware, {din} : Dinka, {dv} : Divehi, {doi} : Dogri, {dgr} : Dogrib, [{dra} : Dravidian (Other)], {dua} : Duala, {nl} : Dutch, {dum} : Middle Dutch (ca.1050-1350), {dyu} : Dyula, {dz} : Dzongkha, {efi} : Efik, {egy} : Ancient Egyptian, {eka} : Ekajuk, {elx} : Elamite, {en} : English, {enm} : Old English (1100-1500), {ang} : Old English (ca.450-1100), {i-enochian} : Enochian (Artificial), {myv} : Erzya, {eo} : Esperanto, {et} : Estonian, {ee} : Ewe, {ewo} : Ewondo, {fan} : Fang, {fat} : Fanti, {fo} : Faroese, {fj} : Fijian, {fi} : Finnish, [{fiu} : Finno-Ugrian (Other)], {fon} : Fon, {fr} : French, {frm} : Middle French (ca.1400-1600), {fro} : Old French (842-ca.1400), {fy} : Frisian, {fur} : Friulian, {ff} : Fulah, {gaa} : Ga, {gd} : Scots Gaelic, {gl} : Gallegan, {lg} : Ganda, {gay} : Gayo, {gba} : Gbaya, {gez} : Geez, {ka} : Georgian, {de} : German, {gmh} : Middle High German (ca.1050-1500), {goh} : Old High German (ca.750-1050), [{gem} : Germanic (Other)], {gil} : Gilbertese, {gon} : Gondi, {gor} : Gorontalo, {got} : Gothic, {grb} : Grebo, {grc} : Ancient Greek, {el} : Modern Greek, {gn} : Guarani, {gu} : Gujarati, {gwi} : Gwich'in, {hai} : Haida, {ht} : Haitian, {ha} : Hausa, {haw} : Hawaiian, {he} : Hebrew, {hz} : Herero, {hil} : Hiligaynon, {him} : Himachali, {hi} : Hindi, {ho} : Hiri Motu, {hit} : Hittite, {hmn} : Hmong, {hu} : Hungarian, {hup} : Hupa, {iba} : Iban, {is} : Icelandic, {io} : Ido, {ig} : Igbo, {ijo} : Ijo, {ilo} : Iloko, [{inc} : Indic (Other)], [{ine} : Indo-European (Other)], {id} : Indonesian, {inh} : Ingush, {ia} : Interlingua (International Auxiliary Language Association), {ie} : Interlingue, {iu} : Inuktitut, {ik} : Inupiaq, [{ira} : Iranian (Other)], {ga} : Irish, {mga} : Middle Irish (900-1200), {sga} : Old Irish (to 900), [{iro} : Iroquoian languages], {it} : Italian, {ja} : Japanese, {jv} : Javanese, {jrb} : Judeo-Arabic, {jpr} : Judeo-Persian, {kbd} : Kabardian, {kab} : Kabyle, {kac} : Kachin, {kl} : Kalaallisut, {xal} : Kalmyk, {kam} : Kamba, {kn} : Kannada, {kr} : Kanuri, {krc} : Karachay-Balkar, {kaa} : Kara-Kalpak, {kar} : Karen, {ks} : Kashmiri, {csb} : Kashubian, {kaw} : Kawi, {kk} : Kazakh, {kha} : Khasi, {km} : Khmer, [{khi} : Khoisan (Other)], {kho} : Khotanese, {ki} : Kikuyu, {kmb} : Kimbundu, {rw} : Kinyarwanda, {ky} : Kirghiz, {i-klingon} : Klingon, {kv} : Komi, {kg} : Kongo, {kok} : Konkani, {ko} : Korean, {kos} : Kosraean, {kpe} : Kpelle, {kro} : Kru, {kj} : Kuanyama, {kum} : Kumyk, {ku} : Kurdish, {kru} : Kurukh, {kut} : Kutenai, {lad} : Ladino, {lah} : Lahnda, {lam} : Lamba, {lo} : Lao, {la} : Latin, {lv} : Latvian, {lb} : Letzeburgesch, {lez} : Lezghian, {li} : Limburgish, {ln} : Lingala, {lt} : Lithuanian, {nds} : Low German, {art-lojban} : Lojban (Artificial), {loz} : Lozi, {lu} : Luba-Katanga, {lua} : Luba-Lulua, {lui} : Luiseno, {lun} : Lunda, {luo} : Luo (Kenya and Tanzania), {lus} : Lushai, {mk} : Macedonian, {mad} : Madurese, {mag} : Magahi, {mai} : Maithili, {mak} : Makasar, {mg} : Malagasy, {ms} : Malay, {ml} : Malayalam, {mt} : Maltese, {mnc} : Manchu, {mdr} : Mandar, {man} : Mandingo, {mni} : Manipuri, [{mno} : Manobo languages], {gv} : Manx, {mi} : Maori, {mr} : Marathi, {chm} : Mari, {mh} : Marshall, {mwr} : Marwari, {mas} : Masai, [{myn} : Mayan languages], {men} : Mende, {mic} : Micmac, {min} : Minangkabau, {i-mingo} : Mingo, [{mis} : Miscellaneous languages], {moh} : Mohawk, {mdf} : Moksha, {mo} : Moldavian, [{mkh} : Mon-Khmer (Other)], {lol} : Mongo, {mn} : Mongolian, {mos} : Mossi, [{mul} : Multiple languages], [{mun} : Munda languages], {nah} : Nahuatl, {nap} : Neapolitan, {na} : Nauru, {nv} : Navajo, {nd} : North Ndebele, {nr} : South Ndebele, {ng} : Ndonga, {ne} : Nepali, {new} : Newari, {nia} : Nias, [{nic} : Niger-Kordofanian (Other)], [{ssa} : Nilo-Saharan (Other)], {niu} : Niuean, {nog} : Nogai, {non} : Old Norse, [{nai} : North American Indian], {no} : Norwegian, {nb} : Norwegian Bokmal, {nn} : Norwegian Nynorsk, [{nub} : Nubian languages], {nym} : Nyamwezi, {nyn} : Nyankole, {nyo} : Nyoro, {nzi} : Nzima, {oc} : Occitan (post 1500), {oj} : Ojibwa, {or} : Oriya, {om} : Oromo, {osa} : Osage, {os} : Ossetian; Ossetic, [{oto} : Otomian languages], {pal} : Pahlavi, {i-pwn} : Paiwan, {pau} : Palauan, {pi} : Pali, {pam} : Pampanga, {pag} : Pangasinan, {pa} : Panjabi, {pap} : Papiamento, [{paa} : Papuan (Other)], {fa} : Persian, {peo} : Old Persian (ca.600-400 B.C.), [{phi} : Philippine (Other)], {phn} : Phoenician, {pon} : Pohnpeian, {pl} : Polish, {pt} : Portuguese, [{pra} : Prakrit languages], {pro} : Old Provencal (to 1500), {ps} : Pushto, {qu} : Quechua, {rm} : Raeto-Romance, {raj} : Rajasthani, {rap} : Rapanui, {rar} : Rarotongan, [{qaa - qtz} : Reserved for local use.], [{roa} : Romance (Other)], {ro} : Romanian, {rom} : Romany, {rn} : Rundi, {ru} : Russian, [{sal} : Salishan languages], {sam} : Samaritan Aramaic, {se} : Northern Sami, {sma} : Southern Sami, {smn} : Inari Sami, {smj} : Lule Sami, {sms} : Skolt Sami, [{smi} : Sami languages (Other)], {sm} : Samoan, {sad} : Sandawe, {sg} : Sango, {sa} : Sanskrit, {sat} : Santali, {sc} : Sardinian, {sas} : Sasak, {sco} : Scots, {sel} : Selkup, [{sem} : Semitic (Other)], {sr} : Serbian, {srr} : Serer, {shn} : Shan, {sn} : Shona, {sid} : Sidamo, {sgn-...} : Sign Languages, {bla} : Siksika, {sd} : Sindhi, {si} : Sinhalese, [{sit} : Sino-Tibetan (Other)], [{sio} : Siouan languages], {den} : Slave (Athapascan), [{sla} : Slavic (Other)], {sk} : Slovak, {sl} : Slovenian, {sog} : Sogdian, {so} : Somali, {son} : Songhai, {snk} : Soninke, {wen} : Sorbian languages, {nso} : Northern Sotho, {st} : Southern Sotho, [{sai} : South American Indian (Other)], {es} : Spanish, {suk} : Sukuma, {sux} : Sumerian, {su} : Sundanese, {sus} : Susu, {sw} : Swahili, {ss} : Swati, {sv} : Swedish, {syr} : Syriac, {tl} : Tagalog, {ty} : Tahitian, [{tai} : Tai (Other)], {tg} : Tajik, {tmh} : Tamashek, {ta} : Tamil, {i-tao} : Tao, {tt} : Tatar, {i-tay} : Tayal, {te} : Telugu, {ter} : Tereno, {tet} : Tetum, {th} : Thai, {bo} : Tibetan, {tig} : Tigre, {ti} : Tigrinya, {tem} : Timne, {tiv} : Tiv, {tli} : Tlingit, {tpi} : Tok Pisin, {tkl} : Tokelau, {tog} : Tonga (Nyasa), {to} : Tonga (Tonga Islands), {tsi} : Tsimshian, {ts} : Tsonga, {i-tsu} : Tsou, {tn} : Tswana, {tum} : Tumbuka, [{tup} : Tupi languages], {tr} : Turkish, {ota} : Ottoman Turkish (1500-1928), {crh} : Crimean Turkish, {tk} : Turkmen, {tvl} : Tuvalu, {tyv} : Tuvinian, {tw} : Twi, {udm} : Udmurt, {uga} : Ugaritic, {ug} : Uighur, {uk} : Ukrainian, {umb} : Umbundu, {und} : Undetermined, {ur} : Urdu, {uz} : Uzbek, {vai} : Vai, {ve} : Venda, {vi} : Vietnamese, {vo} : Volapuk, {vot} : Votic, [{wak} : Wakashan languages], {wa} : Walloon, {wal} : Walamo, {war} : Waray, {was} : Washo, {cy} : Welsh, {wo} : Wolof, {x-...} : Unregistered (Semi-Private Use), {xh} : Xhosa, {sah} : Yakut, {yao} : Yao, {yap} : Yapese, {ii} : Sichuan Yi, {yi} : Yiddish, {yo} : Yoruba, [{ypk} : Yupik languages], {znd} : Zande, [{zap} : Zapotec], {zen} : Zenaga, {za} : Zhuang, {zu} : Zulu, {zun} : Zuni =item SEE ALSO =item COPYRIGHT AND DISCLAIMER =item AUTHOR =back =head2 I18N::Langinfo - query locale information =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item For systems without C<nl_langinfo> C<ERA>, C<CODESET>, C<YESEXPR>, C<YESSTR>, C<NOEXPR>, C<NOSTR>, C<D_FMT>, C<T_FMT>, C<D_T_FMT>, C<CRNCYSTR>, C<ALT_DIGITS>, C<ERA_D_FMT>, C<ERA_T_FMT>, C<ERA_D_T_FMT>, C<T_FMT_AMPM> =item EXPORT =back =item BUGS =item SEE ALSO =item AUTHOR =item COPYRIGHT AND LICENSE =back =head2 IO - load various IO modules =over 4 =item SYNOPSIS =item DESCRIPTION =item DEPRECATED =back =head2 IO::Compress::Base - Base Class for IO::Compress modules =over 4 =item SYNOPSIS =item DESCRIPTION =item SUPPORT =item SEE ALSO =item AUTHOR =item MODIFICATION HISTORY =item COPYRIGHT AND LICENSE =back =head2 IO::Compress::Bzip2 - Write bzip2 files/buffers =over 4 =item SYNOPSIS =item DESCRIPTION =item Functional Interface =over 4 =item bzip2 $input_filename_or_reference => $output_filename_or_reference [, OPTS] A filename, A filehandle, A scalar reference, An array reference, An Input FileGlob string, A filename, A filehandle, A scalar reference, An Array Reference, An Output FileGlob =item Notes =item Optional Parameters C<< AutoClose => 0|1 >>, C<< BinModeIn => 0|1 >>, C<< Append => 0|1 >>, A Buffer, A Filename, A Filehandle =item Examples =back =item OO Interface =over 4 =item Constructor A filename, A filehandle, A scalar reference =item Constructor Options C<< AutoClose => 0|1 >>, C<< Append => 0|1 >>, A Buffer, A Filename, A Filehandle, C<< BlockSize100K => number >>, C<< WorkFactor => number >>, C<< Strict => 0|1 >> =item Examples =back =item Methods =over 4 =item print =item printf =item syswrite =item write =item flush =item tell =item eof =item seek =item binmode =item opened =item autoflush =item input_line_number =item fileno =item close =item newStream([OPTS]) =back =item Importing :all =item EXAMPLES =over 4 =item Apache::GZip Revisited =item Working with Net::FTP =back =item SUPPORT =item SEE ALSO =item AUTHOR =item MODIFICATION HISTORY =item COPYRIGHT AND LICENSE =back =head2 IO::Compress::Deflate - Write RFC 1950 files/buffers =over 4 =item SYNOPSIS =item DESCRIPTION =item Functional Interface =over 4 =item deflate $input_filename_or_reference => $output_filename_or_reference [, OPTS] A filename, A filehandle, A scalar reference, An array reference, An Input FileGlob string, A filename, A filehandle, A scalar reference, An Array Reference, An Output FileGlob =item Notes =item Optional Parameters C<< AutoClose => 0|1 >>, C<< BinModeIn => 0|1 >>, C<< Append => 0|1 >>, A Buffer, A Filename, A Filehandle =item Examples =back =item OO Interface =over 4 =item Constructor A filename, A filehandle, A scalar reference =item Constructor Options C<< AutoClose => 0|1 >>, C<< Append => 0|1 >>, A Buffer, A Filename, A Filehandle, C<< Merge => 0|1 >>, -Level, -Strategy, C<< Strict => 0|1 >> =item Examples =back =item Methods =over 4 =item print =item printf =item syswrite =item write =item flush =item tell =item eof =item seek =item binmode =item opened =item autoflush =item input_line_number =item fileno =item close =item newStream([OPTS]) =item deflateParams =back =item Importing :all, :constants, :flush, :level, :strategy =item EXAMPLES =over 4 =item Apache::GZip Revisited =item Working with Net::FTP =back =item SUPPORT =item SEE ALSO =item AUTHOR =item MODIFICATION HISTORY =item COPYRIGHT AND LICENSE =back =head2 IO::Compress::FAQ -- Frequently Asked Questions about IO::Compress =over 4 =item DESCRIPTION =item GENERAL =over 4 =item Compatibility with Unix compress/uncompress. =item Accessing .tar.Z files =item How do I recompress using a different compression? =back =item ZIP =over 4 =item What Compression Types do IO::Compress::Zip & IO::Uncompress::Unzip support? Store (method 0), Deflate (method 8), Bzip2 (method 12), Lzma (method 14) =item Can I Read/Write Zip files larger the 4 Gig? =item Can I write more that 64K entries is a Zip files? =item Zip Resources =back =item GZIP =over 4 =item Gzip Resources =item Dealing with concatenated gzip files =item Reading bgzip files with IO::Uncompress::Gunzip =back =item ZLIB =over 4 =item Zlib Resources =back =item Bzip2 =over 4 =item Bzip2 Resources =item Dealing with Concatenated bzip2 files =item Interoperating with Pbzip2 =back =item HTTP & NETWORK =over 4 =item Apache::GZip Revisited =item Compressed files and Net::FTP =back =item MISC =over 4 =item Using C<InputLength> to uncompress data embedded in a larger file/buffer. =back =item SUPPORT =item SEE ALSO =item AUTHOR =item MODIFICATION HISTORY =item COPYRIGHT AND LICENSE =back =head2 IO::Compress::Gzip - Write RFC 1952 files/buffers =over 4 =item SYNOPSIS =item DESCRIPTION =item Functional Interface =over 4 =item gzip $input_filename_or_reference => $output_filename_or_reference [, OPTS] A filename, A filehandle, A scalar reference, An array reference, An Input FileGlob string, A filename, A filehandle, A scalar reference, An Array Reference, An Output FileGlob =item Notes =item Optional Parameters C<< AutoClose => 0|1 >>, C<< BinModeIn => 0|1 >>, C<< Append => 0|1 >>, A Buffer, A Filename, A Filehandle =item Examples =back =item OO Interface =over 4 =item Constructor A filename, A filehandle, A scalar reference =item Constructor Options C<< AutoClose => 0|1 >>, C<< Append => 0|1 >>, A Buffer, A Filename, A Filehandle, C<< Merge => 0|1 >>, -Level, -Strategy, C<< Minimal => 0|1 >>, C<< Comment => $comment >>, C<< Name => $string >>, C<< Time => $number >>, C<< TextFlag => 0|1 >>, C<< HeaderCRC => 0|1 >>, C<< OS_Code => $value >>, C<< ExtraField => $data >>, C<< ExtraFlags => $value >>, C<< Strict => 0|1 >> =item Examples =back =item Methods =over 4 =item print =item printf =item syswrite =item write =item flush =item tell =item eof =item seek =item binmode =item opened =item autoflush =item input_line_number =item fileno =item close =item newStream([OPTS]) =item deflateParams =back =item Importing :all, :constants, :flush, :level, :strategy =item EXAMPLES =over 4 =item Apache::GZip Revisited =item Working with Net::FTP =back =item SUPPORT =item SEE ALSO =item AUTHOR =item MODIFICATION HISTORY =item COPYRIGHT AND LICENSE =back =head2 IO::Compress::RawDeflate - Write RFC 1951 files/buffers =over 4 =item SYNOPSIS =item DESCRIPTION =item Functional Interface =over 4 =item rawdeflate $input_filename_or_reference => $output_filename_or_reference [, OPTS] A filename, A filehandle, A scalar reference, An array reference, An Input FileGlob string, A filename, A filehandle, A scalar reference, An Array Reference, An Output FileGlob =item Notes =item Optional Parameters C<< AutoClose => 0|1 >>, C<< BinModeIn => 0|1 >>, C<< Append => 0|1 >>, A Buffer, A Filename, A Filehandle =item Examples =back =item OO Interface =over 4 =item Constructor A filename, A filehandle, A scalar reference =item Constructor Options C<< AutoClose => 0|1 >>, C<< Append => 0|1 >>, A Buffer, A Filename, A Filehandle, C<< Merge => 0|1 >>, -Level, -Strategy, C<< Strict => 0|1 >> =item Examples =back =item Methods =over 4 =item print =item printf =item syswrite =item write =item flush =item tell =item eof =item seek =item binmode =item opened =item autoflush =item input_line_number =item fileno =item close =item newStream([OPTS]) =item deflateParams =back =item Importing :all, :constants, :flush, :level, :strategy =item EXAMPLES =over 4 =item Apache::GZip Revisited =item Working with Net::FTP =back =item SUPPORT =item SEE ALSO =item AUTHOR =item MODIFICATION HISTORY =item COPYRIGHT AND LICENSE =back =head2 IO::Compress::Zip - Write zip files/buffers =over 4 =item SYNOPSIS =item DESCRIPTION To use Bzip2 compression, the module C<IO::Compress::Bzip2> must be installed, To use LZMA compression, the module C<IO::Compress::Lzma> must be installed =item Functional Interface =over 4 =item zip $input_filename_or_reference => $output_filename_or_reference [, OPTS] A filename, A filehandle, A scalar reference, An array reference, An Input FileGlob string, A filename, A filehandle, A scalar reference, An Array Reference, An Output FileGlob =item Notes =item Optional Parameters C<< AutoClose => 0|1 >>, C<< BinModeIn => 0|1 >>, C<< Append => 0|1 >>, A Buffer, A Filename, A Filehandle =item Examples =back =item OO Interface =over 4 =item Constructor A filename, A filehandle, A scalar reference =item Constructor Options C<< AutoClose => 0|1 >>, C<< Append => 0|1 >>, A Buffer, A Filename, A Filehandle, C<< Name => $string >>, If the C<$input> parameter is not a filename, the I<archive member name> will be an empty string, C<< CanonicalName => 0|1 >>, C<< FilterName => sub { ... } >>, C<< Efs => 0|1 >>, C<< Minimal => 1|0 >>, C<< Stream => 0|1 >>, C<< Zip64 => 0|1 >>, -Level, -Strategy, C<< BlockSize100K => number >>, C<< WorkFactor => number >>, C<< Preset => number >>, C<< Extreme => 0|1 >>, C<< Time => $number >>, C<< ExtAttr => $attr >>, C<< exTime => [$atime, $mtime, $ctime] >>, C<< exUnix2 => [$uid, $gid] >>, C<< exUnixN => [$uid, $gid] >>, C<< Comment => $comment >>, C<< ZipComment => $comment >>, C<< Method => $method >>, C<< TextFlag => 0|1 >>, C<< ExtraFieldLocal => $data >>, C<< ExtraFieldCentral => $data >>, C<< Strict => 0|1 >> =item Examples =back =item Methods =over 4 =item print =item printf =item syswrite =item write =item flush =item tell =item eof =item seek =item binmode =item opened =item autoflush =item input_line_number =item fileno =item close =item newStream([OPTS]) =item deflateParams =back =item Importing :all, :constants, :flush, :level, :strategy, :zip_method =item EXAMPLES =over 4 =item Apache::GZip Revisited =item Working with Net::FTP =back =item SUPPORT =item SEE ALSO =item AUTHOR =item MODIFICATION HISTORY =item COPYRIGHT AND LICENSE =back =head2 IO::Dir - supply object methods for directory handles =over 4 =item SYNOPSIS =item DESCRIPTION new ( [ DIRNAME ] ), open ( DIRNAME ), read (), seek ( POS ), tell (), rewind (), close (), tie %hash, 'IO::Dir', DIRNAME [, OPTIONS ] =item SEE ALSO =item AUTHOR =item COPYRIGHT =back =head2 IO::File - supply object methods for filehandles =over 4 =item SYNOPSIS =item DESCRIPTION =item CONSTRUCTOR new ( FILENAME [,MODE [,PERMS]] ), new_tmpfile =item METHODS open( FILENAME [,MODE [,PERMS]] ), open( FILENAME, IOLAYERS ), binmode( [LAYER] ) =item NOTE =item SEE ALSO =item HISTORY =back =head2 IO::Handle - supply object methods for I/O handles =over 4 =item SYNOPSIS =item DESCRIPTION =item CONSTRUCTOR new (), new_from_fd ( FD, MODE ) =item METHODS $io->fdopen ( FD, MODE ), $io->opened, $io->getline, $io->getlines, $io->ungetc ( ORD ), $io->write ( BUF, LEN [, OFFSET ] ), $io->error, $io->clearerr, $io->sync, $io->flush, $io->printflush ( ARGS ), $io->blocking ( [ BOOL ] ), $io->untaint =item NOTE =item SEE ALSO =item BUGS =item HISTORY =back =head2 IO::Pipe - supply object methods for pipes =over 4 =item SYNOPSIS =item DESCRIPTION =item CONSTRUCTOR new ( [READER, WRITER] ) =item METHODS reader ([ARGS]), writer ([ARGS]), handles () =item SEE ALSO =item AUTHOR =item COPYRIGHT =back =head2 IO::Poll - Object interface to system poll call =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS mask ( IO [, EVENT_MASK ] ), poll ( [ TIMEOUT ] ), events ( IO ), remove ( IO ), handles( [ EVENT_MASK ] ) =item SEE ALSO =item AUTHOR =item COPYRIGHT =back =head2 IO::Seekable - supply seek based methods for I/O objects =over 4 =item SYNOPSIS =item DESCRIPTION $io->getpos, $io->setpos, $io->seek ( POS, WHENCE ), WHENCE=0 (SEEK_SET), WHENCE=1 (SEEK_CUR), WHENCE=2 (SEEK_END), $io->sysseek( POS, WHENCE ), $io->tell =item SEE ALSO =item HISTORY =back =head2 IO::Select - OO interface to the select system call =over 4 =item SYNOPSIS =item DESCRIPTION =item CONSTRUCTOR new ( [ HANDLES ] ) =item METHODS add ( HANDLES ), remove ( HANDLES ), exists ( HANDLE ), handles, can_read ( [ TIMEOUT ] ), can_write ( [ TIMEOUT ] ), has_exception ( [ TIMEOUT ] ), count (), bits(), select ( READ, WRITE, EXCEPTION [, TIMEOUT ] ) =item EXAMPLE =item AUTHOR =item COPYRIGHT =back =head2 IO::Socket - Object interface to socket communications =over 4 =item SYNOPSIS =item DESCRIPTION =item CONSTRUCTOR ARGUMENTS =over 4 =item Blocking =item Domain =item Listen =item Timeout =item Type =back =item CONSTRUCTORS =over 4 =item new =back =item METHODS =over 4 =item accept =item atmark =item autoflush =item bind =item connected =item getsockopt =item listen =item peername =item protocol =item recv =item send =item setsockopt =item shutdown =item sockdomain =item socket =item socketpair =item sockname =item sockopt =item socktype =item timeout =back =item EXAMPLES =item LIMITATIONS =item SEE ALSO =item AUTHOR =item COPYRIGHT =back =head2 IO::Socket::INET - Object interface for AF_INET domain sockets =over 4 =item SYNOPSIS =item DESCRIPTION =item CONSTRUCTOR new ( [ARGS] ) =over 4 =item METHODS sockaddr (), sockport (), sockhost (), peeraddr (), peerport (), peerhost () =back =item SEE ALSO =item AUTHOR =item COPYRIGHT =back =head2 IO::Socket::IP, C<IO::Socket::IP> - Family-neutral IP socket supporting both IPv4 and IPv6 =over 4 =item SYNOPSIS =item DESCRIPTION =item REPLACING C<IO::Socket> DEFAULT BEHAVIOUR =back =over 4 =item CONSTRUCTORS =back =over 4 =item $sock = IO::Socket::IP->new( %args ) PeerHost => STRING, PeerService => STRING, PeerAddr => STRING, PeerPort => STRING, PeerAddrInfo => ARRAY, LocalHost => STRING, LocalService => STRING, LocalAddr => STRING, LocalPort => STRING, LocalAddrInfo => ARRAY, Family => INT, Type => INT, Proto => STRING or INT, GetAddrInfoFlags => INT, Listen => INT, ReuseAddr => BOOL, ReusePort => BOOL, Broadcast => BOOL, Sockopts => ARRAY, V6Only => BOOL, MultiHomed, Blocking => BOOL, Timeout => NUM =item $sock = IO::Socket::IP->new( $peeraddr ) =back =over 4 =item METHODS =back =over 4 =item ( $host, $service ) = $sock->sockhost_service( $numeric ) =back =over 4 =item $addr = $sock->sockhost =item $port = $sock->sockport =item $host = $sock->sockhostname =item $service = $sock->sockservice =back =over 4 =item $addr = $sock->sockaddr =back =over 4 =item ( $host, $service ) = $sock->peerhost_service( $numeric ) =back =over 4 =item $addr = $sock->peerhost =item $port = $sock->peerport =item $host = $sock->peerhostname =item $service = $sock->peerservice =back =over 4 =item $addr = $peer->peeraddr =back =over 4 =item $inet = $sock->as_inet =back =over 4 =item NON-BLOCKING =back =over 4 =item C<PeerHost> AND C<LocalHost> PARSING =over 4 =item ( $host, $port ) = IO::Socket::IP->split_addr( $addr ) =back =back =over 4 =item $addr = IO::Socket::IP->join_addr( $host, $port ) =back =over 4 =item C<IO::Socket::INET> INCOMPATIBILITES =back =over 4 =item TODO =item AUTHOR =back =head2 IO::Socket::UNIX - Object interface for AF_UNIX domain sockets =over 4 =item SYNOPSIS =item DESCRIPTION =item CONSTRUCTOR new ( [ARGS] ) =item METHODS hostpath(), peerpath() =item SEE ALSO =item AUTHOR =item COPYRIGHT =back =head2 IO::Uncompress::AnyInflate - Uncompress zlib-based (zip, gzip) file/buffer =over 4 =item SYNOPSIS =item DESCRIPTION RFC 1950, RFC 1951 (optionally), gzip (RFC 1952), zip =item Functional Interface =over 4 =item anyinflate $input_filename_or_reference => $output_filename_or_reference [, OPTS] A filename, A filehandle, A scalar reference, An array reference, An Input FileGlob string, A filename, A filehandle, A scalar reference, An Array Reference, An Output FileGlob =item Notes =item Optional Parameters C<< AutoClose => 0|1 >>, C<< BinModeOut => 0|1 >>, C<< Append => 0|1 >>, A Buffer, A Filename, A Filehandle, C<< MultiStream => 0|1 >>, C<< TrailingData => $scalar >> =item Examples =back =item OO Interface =over 4 =item Constructor A filename, A filehandle, A scalar reference =item Constructor Options C<< AutoClose => 0|1 >>, C<< MultiStream => 0|1 >>, C<< Prime => $string >>, C<< Transparent => 0|1 >>, C<< BlockSize => $num >>, C<< InputLength => $size >>, C<< Append => 0|1 >>, C<< Strict => 0|1 >>, C<< RawInflate => 0|1 >>, C<< ParseExtra => 0|1 >> If the gzip FEXTRA header field is present and this option is set, it will force the module to check that it conforms to the sub-field structure as defined in RFC 1952 =item Examples =back =item Methods =over 4 =item read =item read =item getline =item getc =item ungetc =item inflateSync =item getHeaderInfo =item tell =item eof =item seek =item binmode =item opened =item autoflush =item input_line_number =item fileno =item close =item nextStream =item trailingData =back =item Importing :all =item EXAMPLES =over 4 =item Working with Net::FTP =back =item SUPPORT =item SEE ALSO =item AUTHOR =item MODIFICATION HISTORY =item COPYRIGHT AND LICENSE =back =head2 IO::Uncompress::AnyUncompress - Uncompress gzip, zip, bzip2, xz, lzma, lzip, lzf or lzop file/buffer =over 4 =item SYNOPSIS =item DESCRIPTION RFC 1950, RFC 1951 (optionally), gzip (RFC 1952), zip, bzip2, lzop, lzf, lzma, lzip, xz =item Functional Interface =over 4 =item anyuncompress $input_filename_or_reference => $output_filename_or_reference [, OPTS] A filename, A filehandle, A scalar reference, An array reference, An Input FileGlob string, A filename, A filehandle, A scalar reference, An Array Reference, An Output FileGlob =item Notes =item Optional Parameters C<< AutoClose => 0|1 >>, C<< BinModeOut => 0|1 >>, C<< Append => 0|1 >>, A Buffer, A Filename, A Filehandle, C<< MultiStream => 0|1 >>, C<< TrailingData => $scalar >> =item Examples =back =item OO Interface =over 4 =item Constructor A filename, A filehandle, A scalar reference =item Constructor Options C<< AutoClose => 0|1 >>, C<< MultiStream => 0|1 >>, C<< Prime => $string >>, C<< Transparent => 0|1 >>, C<< BlockSize => $num >>, C<< InputLength => $size >>, C<< Append => 0|1 >>, C<< Strict => 0|1 >>, C<< RawInflate => 0|1 >>, C<< UnLzma => 0|1 >> =item Examples =back =item Methods =over 4 =item read =item read =item getline =item getc =item ungetc =item getHeaderInfo =item tell =item eof =item seek =item binmode =item opened =item autoflush =item input_line_number =item fileno =item close =item nextStream =item trailingData =back =item Importing :all =item EXAMPLES =item SUPPORT =item SEE ALSO =item AUTHOR =item MODIFICATION HISTORY =item COPYRIGHT AND LICENSE =back =head2 IO::Uncompress::Base - Base Class for IO::Uncompress modules =over 4 =item SYNOPSIS =item DESCRIPTION =item SUPPORT =item SEE ALSO =item AUTHOR =item MODIFICATION HISTORY =item COPYRIGHT AND LICENSE =back =head2 IO::Uncompress::Bunzip2 - Read bzip2 files/buffers =over 4 =item SYNOPSIS =item DESCRIPTION =item Functional Interface =over 4 =item bunzip2 $input_filename_or_reference => $output_filename_or_reference [, OPTS] A filename, A filehandle, A scalar reference, An array reference, An Input FileGlob string, A filename, A filehandle, A scalar reference, An Array Reference, An Output FileGlob =item Notes =item Optional Parameters C<< AutoClose => 0|1 >>, C<< BinModeOut => 0|1 >>, C<< Append => 0|1 >>, A Buffer, A Filename, A Filehandle, C<< MultiStream => 0|1 >>, C<< TrailingData => $scalar >> =item Examples =back =item OO Interface =over 4 =item Constructor A filename, A filehandle, A scalar reference =item Constructor Options C<< AutoClose => 0|1 >>, C<< MultiStream => 0|1 >>, C<< Prime => $string >>, C<< Transparent => 0|1 >>, C<< BlockSize => $num >>, C<< InputLength => $size >>, C<< Append => 0|1 >>, C<< Strict => 0|1 >>, C<< Small => 0|1 >> =item Examples =back =item Methods =over 4 =item read =item read =item getline =item getc =item ungetc =item getHeaderInfo =item tell =item eof =item seek =item binmode =item opened =item autoflush =item input_line_number =item fileno =item close =item nextStream =item trailingData =back =item Importing :all =item EXAMPLES =over 4 =item Working with Net::FTP =back =item SUPPORT =item SEE ALSO =item AUTHOR =item MODIFICATION HISTORY =item COPYRIGHT AND LICENSE =back =head2 IO::Uncompress::Gunzip - Read RFC 1952 files/buffers =over 4 =item SYNOPSIS =item DESCRIPTION =item Functional Interface =over 4 =item gunzip $input_filename_or_reference => $output_filename_or_reference [, OPTS] A filename, A filehandle, A scalar reference, An array reference, An Input FileGlob string, A filename, A filehandle, A scalar reference, An Array Reference, An Output FileGlob =item Notes =item Optional Parameters C<< AutoClose => 0|1 >>, C<< BinModeOut => 0|1 >>, C<< Append => 0|1 >>, A Buffer, A Filename, A Filehandle, C<< MultiStream => 0|1 >>, C<< TrailingData => $scalar >> =item Examples =back =item OO Interface =over 4 =item Constructor A filename, A filehandle, A scalar reference =item Constructor Options C<< AutoClose => 0|1 >>, C<< MultiStream => 0|1 >>, C<< Prime => $string >>, C<< Transparent => 0|1 >>, C<< BlockSize => $num >>, C<< InputLength => $size >>, C<< Append => 0|1 >>, C<< Strict => 0|1 >>, C<< ParseExtra => 0|1 >> If the gzip FEXTRA header field is present and this option is set, it will force the module to check that it conforms to the sub-field structure as defined in RFC 1952 =item Examples =back =item Methods =over 4 =item read =item read =item getline =item getc =item ungetc =item inflateSync =item getHeaderInfo Name, Comment =item tell =item eof =item seek =item binmode =item opened =item autoflush =item input_line_number =item fileno =item close =item nextStream =item trailingData =back =item Importing :all =item EXAMPLES =over 4 =item Working with Net::FTP =back =item SUPPORT =item SEE ALSO =item AUTHOR =item MODIFICATION HISTORY =item COPYRIGHT AND LICENSE =back =head2 IO::Uncompress::Inflate - Read RFC 1950 files/buffers =over 4 =item SYNOPSIS =item DESCRIPTION =item Functional Interface =over 4 =item inflate $input_filename_or_reference => $output_filename_or_reference [, OPTS] A filename, A filehandle, A scalar reference, An array reference, An Input FileGlob string, A filename, A filehandle, A scalar reference, An Array Reference, An Output FileGlob =item Notes =item Optional Parameters C<< AutoClose => 0|1 >>, C<< BinModeOut => 0|1 >>, C<< Append => 0|1 >>, A Buffer, A Filename, A Filehandle, C<< MultiStream => 0|1 >>, C<< TrailingData => $scalar >> =item Examples =back =item OO Interface =over 4 =item Constructor A filename, A filehandle, A scalar reference =item Constructor Options C<< AutoClose => 0|1 >>, C<< MultiStream => 0|1 >>, C<< Prime => $string >>, C<< Transparent => 0|1 >>, C<< BlockSize => $num >>, C<< InputLength => $size >>, C<< Append => 0|1 >>, C<< Strict => 0|1 >> =item Examples =back =item Methods =over 4 =item read =item read =item getline =item getc =item ungetc =item inflateSync =item getHeaderInfo =item tell =item eof =item seek =item binmode =item opened =item autoflush =item input_line_number =item fileno =item close =item nextStream =item trailingData =back =item Importing :all =item EXAMPLES =over 4 =item Working with Net::FTP =back =item SUPPORT =item SEE ALSO =item AUTHOR =item MODIFICATION HISTORY =item COPYRIGHT AND LICENSE =back =head2 IO::Uncompress::RawInflate - Read RFC 1951 files/buffers =over 4 =item SYNOPSIS =item DESCRIPTION =item Functional Interface =over 4 =item rawinflate $input_filename_or_reference => $output_filename_or_reference [, OPTS] A filename, A filehandle, A scalar reference, An array reference, An Input FileGlob string, A filename, A filehandle, A scalar reference, An Array Reference, An Output FileGlob =item Notes =item Optional Parameters C<< AutoClose => 0|1 >>, C<< BinModeOut => 0|1 >>, C<< Append => 0|1 >>, A Buffer, A Filename, A Filehandle, C<< MultiStream => 0|1 >>, C<< TrailingData => $scalar >> =item Examples =back =item OO Interface =over 4 =item Constructor A filename, A filehandle, A scalar reference =item Constructor Options C<< AutoClose => 0|1 >>, C<< MultiStream => 0|1 >>, C<< Prime => $string >>, C<< Transparent => 0|1 >>, C<< BlockSize => $num >>, C<< InputLength => $size >>, C<< Append => 0|1 >>, C<< Strict => 0|1 >> =item Examples =back =item Methods =over 4 =item read =item read =item getline =item getc =item ungetc =item inflateSync =item getHeaderInfo =item tell =item eof =item seek =item binmode =item opened =item autoflush =item input_line_number =item fileno =item close =item nextStream =item trailingData =back =item Importing :all =item EXAMPLES =over 4 =item Working with Net::FTP =back =item SUPPORT =item SEE ALSO =item AUTHOR =item MODIFICATION HISTORY =item COPYRIGHT AND LICENSE =back =head2 IO::Uncompress::Unzip - Read zip files/buffers =over 4 =item SYNOPSIS =item DESCRIPTION =item Functional Interface =over 4 =item unzip $input_filename_or_reference => $output_filename_or_reference [, OPTS] A filename, A filehandle, A scalar reference, An array reference, An Input FileGlob string, A filename, A filehandle, A scalar reference, An Array Reference, An Output FileGlob =item Notes =item Optional Parameters C<< AutoClose => 0|1 >>, C<< BinModeOut => 0|1 >>, C<< Append => 0|1 >>, A Buffer, A Filename, A Filehandle, C<< MultiStream => 0|1 >>, C<< TrailingData => $scalar >> =item Examples =back =item OO Interface =over 4 =item Constructor A filename, A filehandle, A scalar reference =item Constructor Options C<< Name => "membername" >>, C<< Efs => 0| 1 >>, C<< AutoClose => 0|1 >>, C<< MultiStream => 0|1 >>, C<< Prime => $string >>, C<< Transparent => 0|1 >>, C<< BlockSize => $num >>, C<< InputLength => $size >>, C<< Append => 0|1 >>, C<< Strict => 0|1 >> =item Examples =back =item Methods =over 4 =item read =item read =item getline =item getc =item ungetc =item inflateSync =item getHeaderInfo =item tell =item eof =item seek =item binmode =item opened =item autoflush =item input_line_number =item fileno =item close =item nextStream =item trailingData =back =item Importing :all =item EXAMPLES =over 4 =item Working with Net::FTP =item Walking through a zip file =item Unzipping a complete zip file to disk =back =item SUPPORT =item SEE ALSO =item AUTHOR =item MODIFICATION HISTORY =item COPYRIGHT AND LICENSE =back =head2 IO::Zlib - IO:: style interface to L<Compress::Zlib> =over 4 =item SYNOPSIS =item DESCRIPTION =item CONSTRUCTOR new ( [ARGS] ) =item OBJECT METHODS open ( FILENAME, MODE ), opened, close, getc, getline, getlines, print ( ARGS... ), read ( BUF, NBYTES, [OFFSET] ), eof, seek ( OFFSET, WHENCE ), tell, setpos ( POS ), getpos ( POS ) =item USING THE EXTERNAL GZIP =item CLASS METHODS has_Compress_Zlib, gzip_external, gzip_used, gzip_read_open, gzip_write_open =item DIAGNOSTICS IO::Zlib::getlines: must be called in list context, IO::Zlib::gzopen_external: mode '...' is illegal, IO::Zlib::import: '...' is illegal, IO::Zlib::import: ':gzip_external' requires an argument, IO::Zlib::import: 'gzip_read_open' requires an argument, IO::Zlib::import: 'gzip_read' '...' is illegal, IO::Zlib::import: 'gzip_write_open' requires an argument, IO::Zlib::import: 'gzip_write_open' '...' is illegal, IO::Zlib::import: no Compress::Zlib and no external gzip, IO::Zlib::open: needs a filename, IO::Zlib::READ: NBYTES must be specified, IO::Zlib::WRITE: too long LENGTH =item SEE ALSO =item HISTORY =item COPYRIGHT =back =head2 IPC::Cmd - finding and running system commands made easy =over 4 =item SYNOPSIS =item DESCRIPTION =item CLASS METHODS =over 4 =item $ipc_run_version = IPC::Cmd->can_use_ipc_run( [VERBOSE] ) =back =back =over 4 =item $ipc_open3_version = IPC::Cmd->can_use_ipc_open3( [VERBOSE] ) =back =over 4 =item $bool = IPC::Cmd->can_capture_buffer =back =over 4 =item $bool = IPC::Cmd->can_use_run_forked =back =over 4 =item FUNCTIONS =over 4 =item $path = can_run( PROGRAM ); =back =back =over 4 =item $ok | ($ok, $err, $full_buf, $stdout_buff, $stderr_buff) = run( command => COMMAND, [verbose => BOOL, buffer => \$SCALAR, timeout => DIGIT] ); command, verbose, buffer, timeout, success, error message, full_buffer, out_buffer, error_buffer =back =over 4 =item $hashref = run_forked( COMMAND, { child_stdin => SCALAR, timeout => DIGIT, stdout_handler => CODEREF, stderr_handler => CODEREF} ); C<timeout>, C<child_stdin>, C<stdout_handler>, C<stderr_handler>, C<wait_loop_callback>, C<discard_output>, C<terminate_on_parent_sudden_death>, C<exit_code>, C<timeout>, C<stdout>, C<stderr>, C<merged>, C<err_msg> =back =over 4 =item $q = QUOTE =back =over 4 =item HOW IT WORKS =item Global Variables =over 4 =item $IPC::Cmd::VERBOSE =item $IPC::Cmd::USE_IPC_RUN =item $IPC::Cmd::USE_IPC_OPEN3 =item $IPC::Cmd::WARN =item $IPC::Cmd::INSTANCES =item $IPC::Cmd::ALLOW_NULL_ARGS =back =item Caveats Whitespace and IPC::Open3 / system(), Whitespace and IPC::Run, IO Redirect, Interleaving STDOUT/STDERR =item See Also =item ACKNOWLEDGEMENTS =item BUG REPORTS =item AUTHOR =item COPYRIGHT =back =head2 IPC::Msg - SysV Msg IPC object class =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS new ( KEY , FLAGS ), id, rcv ( BUF, LEN [, TYPE [, FLAGS ]] ), remove, set ( STAT ), set ( NAME => VALUE [, NAME => VALUE ...] ), snd ( TYPE, MSG [, FLAGS ] ), stat =item SEE ALSO =item AUTHORS =item COPYRIGHT =back =head2 IPC::Open2 - open a process for both reading and writing using open2() =over 4 =item SYNOPSIS =item DESCRIPTION =item WARNING =item SEE ALSO =back =head2 IPC::Open3 - open a process for reading, writing, and error handling using open3() =over 4 =item SYNOPSIS =item DESCRIPTION =item See Also L<IPC::Open2>, L<IPC::Run> =item WARNING =back =head2 IPC::Semaphore - SysV Semaphore IPC object class =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS new ( KEY , NSEMS , FLAGS ), getall, getncnt ( SEM ), getpid ( SEM ), getval ( SEM ), getzcnt ( SEM ), id, op ( OPLIST ), remove, set ( STAT ), set ( NAME => VALUE [, NAME => VALUE ...] ), setall ( VALUES ), setval ( N , VALUE ), stat =item SEE ALSO =item AUTHORS =item COPYRIGHT =back =head2 IPC::SharedMem - SysV Shared Memory IPC object class =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS new ( KEY , SIZE , FLAGS ), id, read ( POS, SIZE ), write ( STRING, POS, SIZE ), remove, is_removed, stat, attach ( [FLAG] ), detach, addr =item SEE ALSO =item AUTHORS =item COPYRIGHT =back =head2 IPC::SysV - System V IPC constants and system calls =over 4 =item SYNOPSIS =item DESCRIPTION ftok( PATH ), ftok( PATH, ID ), shmat( ID, ADDR, FLAG ), shmdt( ADDR ), memread( ADDR, VAR, POS, SIZE ), memwrite( ADDR, STRING, POS, SIZE ) =item SEE ALSO =item AUTHORS =item COPYRIGHT =back =head2 Internals - Reserved special namespace for internals related functions =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item FUNCTIONS SvREFCNT(THING [, $value]), SvREADONLY(THING, [, $value]), hv_clear_placeholders(%hash) =back =item AUTHOR =item SEE ALSO =back =head2 JSON::PP - JSON::XS compatible pure-Perl module. =over 4 =item SYNOPSIS =item VERSION =item DESCRIPTION =item FUNCTIONAL INTERFACE =over 4 =item encode_json =item decode_json =item JSON::PP::is_bool =back =item OBJECT-ORIENTED INTERFACE =over 4 =item new =item ascii =item latin1 =item utf8 =item pretty =item indent =item space_before =item space_after =item relaxed list items can have an end-comma, shell-style '#'-comments, C-style multiple-line '/* */'-comments (JSON::PP only), C++-style one-line '//'-comments (JSON::PP only), literal ASCII TAB characters in strings =item canonical =item allow_nonref =item allow_unknown =item allow_blessed =item convert_blessed =item allow_tags =item boolean_values =item filter_json_object =item filter_json_single_key_object =item shrink =item max_depth =item max_size =item encode =item decode =item decode_prefix =back =item FLAGS FOR JSON::PP ONLY =over 4 =item allow_singlequote =item allow_barekey =item allow_bignum =item loose =item escape_slash =item indent_length =item sort_by =back =item INCREMENTAL PARSING =over 4 =item incr_parse =item incr_text =item incr_skip =item incr_reset =back =item MAPPING =over 4 =item JSON -> PERL object, array, string, number, true, false, null, shell-style comments (C<< # I<text> >>), tagged values (C<< (I<tag>)I<value> >>) =item PERL -> JSON hash references, array references, other references, JSON::PP::true, JSON::PP::false, JSON::PP::null, blessed objects, simple scalars =item OBJECT SERIALISATION 1. C<allow_tags> is enabled and the object has a C<FREEZE> method, 2. C<convert_blessed> is enabled and the object has a C<TO_JSON> method, 3. C<allow_bignum> is enabled and the object is a C<Math::BigInt> or C<Math::BigFloat>, 4. C<allow_blessed> is enabled, 5. none of the above =back =item ENCODING/CODESET FLAG NOTES C<utf8> flag disabled, C<utf8> flag enabled, C<latin1> or C<ascii> flags enabled =item BUGS =item SEE ALSO =item AUTHOR =item CURRENT MAINTAINER =item COPYRIGHT AND LICENSE =back =head2 JSON::PP::Boolean - dummy module providing JSON::PP::Boolean =over 4 =item SYNOPSIS =item DESCRIPTION =item AUTHOR =item LICENSE =back =head2 List::Util - A selection of general-utility list subroutines =over 4 =item SYNOPSIS =item DESCRIPTION =back =over 4 =item LIST-REDUCTION FUNCTIONS =back =over 4 =item reduce =item reductions =item any =item all =item none =item notall =item first =item max =item maxstr =item min =item minstr =item product =item sum =item sum0 =back =over 4 =item KEY/VALUE PAIR LIST FUNCTIONS =back =over 4 =item pairs =item unpairs =item pairkeys =item pairvalues =item pairgrep =item pairfirst =item pairmap =back =over 4 =item OTHER FUNCTIONS =back =over 4 =item shuffle =back =over 4 =item sample =item uniq =item uniqint =item uniqnum =item uniqstr =back =over 4 =item head =item tail =back =over 4 =item CONFIGURATION VARIABLES =over 4 =item $RAND =back =item KNOWN BUGS =over 4 =item RT #95409 =item uniqnum() on oversized bignums =back =item SUGGESTED ADDITIONS =item SEE ALSO =item COPYRIGHT =back =head2 List::Util::XS - Indicate if List::Util was compiled with a C compiler =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item COPYRIGHT =back =head2 Locale::Maketext - framework for localization =over 4 =item SYNOPSIS =item DESCRIPTION =item QUICK OVERVIEW =item METHODS =over 4 =item Construction Methods =item The "maketext" Method $lh->fail_with I<or> $lh->fail_with(I<PARAM>), $lh->failure_handler_auto, $lh->blacklist(@list), $lh->whitelist(@list) =item Utility Methods $language->quant($number, $singular), $language->quant($number, $singular, $plural), $language->quant($number, $singular, $plural, $negative), $language->numf($number), $language->numerate($number, $singular, $plural, $negative), $language->sprintf($format, @items), $language->language_tag(), $language->encoding() =item Language Handle Attributes and Internals =back =item LANGUAGE CLASS HIERARCHIES =item ENTRIES IN EACH LEXICON =item BRACKET NOTATION =item BRACKET NOTATION SECURITY =item AUTO LEXICONS =item READONLY LEXICONS =item CONTROLLING LOOKUP FAILURE =item HOW TO USE MAKETEXT =item SEE ALSO =item COPYRIGHT AND DISCLAIMER =item AUTHOR =back =head2 Locale::Maketext::Cookbook - recipes for using Locale::Maketext =over 4 =item INTRODUCTION =item ONESIDED LEXICONS =item DECIMAL PLACES IN NUMBER FORMATTING =back =head2 Locale::Maketext::Guts - Deprecated module to load Locale::Maketext utf8 code =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 Locale::Maketext::GutsLoader - Deprecated module to load Locale::Maketext utf8 code =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 Locale::Maketext::Simple - Simple interface to Locale::Maketext::Lexicon =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item OPTIONS =over 4 =item Class =item Path =item Style =item Export =item Subclass =item Decode =item Encoding =back =back =over 4 =item ACKNOWLEDGMENTS =item SEE ALSO =item AUTHORS =item COPYRIGHT =over 4 =item The "MIT" License =back =back =head2 Locale::Maketext::TPJ13 -- article about software localization =over 4 =item SYNOPSIS =item DESCRIPTION =item Localization and Perl: gettext breaks, Maketext fixes =over 4 =item A Localization Horror Story: It Could Happen To You =item The Linguistic View =item Breaking gettext =item Replacing gettext =item Buzzwords: Abstraction and Encapsulation =item Buzzword: Isomorphism =item Buzzword: Inheritance =item Buzzword: Concision =item The Devil in the Details =item The Proof in the Pudding: Localizing Web Sites =item References =back =back =head2 MIME::Base64 - Encoding and decoding of base64 strings =over 4 =item SYNOPSIS =item DESCRIPTION encode_base64( $bytes ), encode_base64( $bytes, $eol );, decode_base64( $str ), encode_base64url( $bytes ), decode_base64url( $str ), encoded_base64_length( $bytes ), encoded_base64_length( $bytes, $eol ), decoded_base64_length( $str ) =item EXAMPLES =item COPYRIGHT =item SEE ALSO =back =head2 MIME::QuotedPrint - Encoding and decoding of quoted-printable strings =over 4 =item SYNOPSIS =item DESCRIPTION encode_qp( $str), encode_qp( $str, $eol), encode_qp( $str, $eol, $binmode ), decode_qp( $str ) =item COPYRIGHT =item SEE ALSO =back =head2 Math::BigFloat - Arbitrary size floating point math package =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Input =item Output =back =item METHODS =over 4 =item Configuration methods accuracy(), precision() =item Constructor methods from_hex(), from_oct(), from_bin(), from_ieee754(), bpi() =item Arithmetic methods bmuladd(), bdiv(), bmod(), bexp(), bnok(), bsin(), bcos(), batan(), batan2(), as_float(), to_ieee754() =item ACCURACY AND PRECISION =item Rounding bfround ( +$scale ), bfround ( -$scale ), bfround ( 0 ), bround ( +$scale ), bround ( -$scale ) and bround ( 0 ) =back =item Autocreating constants =over 4 =item Math library =item Using Math::BigInt::Lite =back =item EXPORTS =item CAVEATS stringify, bstr(), brsft(), Modifying and =, precision() vs. accuracy() =item BUGS =item SUPPORT RT: CPAN's request tracker, AnnoCPAN: Annotated CPAN documentation, CPAN Ratings, MetaCPAN, CPAN Testers Matrix, The Bignum mailing list, Post to mailing list, View mailing list, Subscribe/Unsubscribe =item LICENSE =item SEE ALSO =item AUTHORS =back =head2 Math::BigInt - Arbitrary size integer/float math package =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Input =item Output =back =item METHODS =over 4 =item Configuration methods accuracy(), precision(), div_scale(), round_mode(), upgrade(), downgrade(), modify(), config() =item Constructor methods new(), from_hex(), from_oct(), from_bin(), from_bytes(), from_base(), bzero(), bone(), binf(), bnan(), bpi(), copy(), as_int(), as_number() =item Boolean methods is_zero(), is_one( [ SIGN ]), is_finite(), is_inf( [ SIGN ] ), is_nan(), is_positive(), is_pos(), is_negative(), is_neg(), is_non_positive(), is_non_negative(), is_odd(), is_even(), is_int() =item Comparison methods bcmp(), bacmp(), beq(), bne(), blt(), ble(), bgt(), bge() =item Arithmetic methods bneg(), babs(), bsgn(), bnorm(), binc(), bdec(), badd(), bsub(), bmul(), bmuladd(), bdiv(), btdiv(), bmod(), btmod(), bmodinv(), bmodpow(), bpow(), blog(), bexp(), bnok(), buparrow(), uparrow(), backermann(), ackermann(), bsin(), bcos(), batan(), batan2(), bsqrt(), broot(), bfac(), bdfac(), bfib(), blucas(), brsft(), blsft() =item Bitwise methods band(), bior(), bxor(), bnot() =item Rounding methods round(), bround(), bfround(), bfloor(), bceil(), bint() =item Other mathematical methods bgcd(), blcm() =item Object property methods sign(), digit(), digitsum(), bdigitsum(), length(), mantissa(), exponent(), parts(), sparts(), nparts(), eparts(), dparts() =item String conversion methods bstr(), bsstr(), bnstr(), bestr(), bdstr(), to_hex(), to_bin(), to_oct(), to_bytes(), to_base(), as_hex(), as_bin(), as_oct(), as_bytes() =item Other conversion methods numify() =back =item ACCURACY and PRECISION =over 4 =item Precision P =item Accuracy A =item Fallback F =item Rounding mode R 'trunc', 'even', 'odd', '+inf', '-inf', 'zero', 'common', Precision, Accuracy (significant digits), Setting/Accessing, Creating numbers, Usage, Precedence, Overriding globals, Local settings, Rounding, Default values, Remarks =back =item Infinity and Not a Number oct()/hex() =item INTERNALS =over 4 =item MATH LIBRARY =item SIGN =back =item EXAMPLES =item Autocreating constants =item PERFORMANCE =over 4 =item Alternative math libraries =back =item SUBCLASSING =over 4 =item Subclassing Math::BigInt =back =item UPGRADING =over 4 =item Auto-upgrade =back =item EXPORTS =item CAVEATS Comparing numbers as strings, int(), Modifying and =, Overloading -$x, Mixing different object types =item BUGS =item SUPPORT RT: CPAN's request tracker, AnnoCPAN: Annotated CPAN documentation, CPAN Ratings, MetaCPAN, CPAN Testers Matrix, The Bignum mailing list, Post to mailing list, View mailing list, Subscribe/Unsubscribe =item LICENSE =item SEE ALSO =item AUTHORS =back =head2 Math::BigInt::Calc - Pure Perl module to support Math::BigInt =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =back =head2 Math::BigInt::FastCalc - Math::BigInt::Calc with some XS for more speed =over 4 =item SYNOPSIS =item DESCRIPTION =item STORAGE =item METHODS =item BUGS =item SUPPORT RT: CPAN's request tracker, AnnoCPAN: Annotated CPAN documentation, CPAN Ratings, Search CPAN, CPAN Testers Matrix, The Bignum mailing list, Post to mailing list, View mailing list, Subscribe/Unsubscribe =item LICENSE =item AUTHORS =item SEE ALSO =back =head2 Math::BigInt::Lib - virtual parent class for Math::BigInt libraries =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item General Notes CLASS-E<gt>api_version(), CLASS-E<gt>_new(STR), CLASS-E<gt>_zero(), CLASS-E<gt>_one(), CLASS-E<gt>_two(), CLASS-E<gt>_ten(), CLASS-E<gt>_from_bin(STR), CLASS-E<gt>_from_oct(STR), CLASS-E<gt>_from_hex(STR), CLASS-E<gt>_from_bytes(STR), CLASS-E<gt>_from_base(STR, BASE, COLLSEQ), CLASS-E<gt>_add(OBJ1, OBJ2), CLASS-E<gt>_mul(OBJ1, OBJ2), CLASS-E<gt>_div(OBJ1, OBJ2), CLASS-E<gt>_sub(OBJ1, OBJ2, FLAG), CLASS-E<gt>_sub(OBJ1, OBJ2), CLASS-E<gt>_dec(OBJ), CLASS-E<gt>_inc(OBJ), CLASS-E<gt>_mod(OBJ1, OBJ2), CLASS-E<gt>_sqrt(OBJ), CLASS-E<gt>_root(OBJ, N), CLASS-E<gt>_fac(OBJ), CLASS-E<gt>_dfac(OBJ), CLASS-E<gt>_pow(OBJ1, OBJ2), CLASS-E<gt>_modinv(OBJ1, OBJ2), CLASS-E<gt>_modpow(OBJ1, OBJ2, OBJ3), CLASS-E<gt>_rsft(OBJ, N, B), CLASS-E<gt>_lsft(OBJ, N, B), CLASS-E<gt>_log_int(OBJ, B), CLASS-E<gt>_gcd(OBJ1, OBJ2), CLASS-E<gt>_lcm(OBJ1, OBJ2), CLASS-E<gt>_fib(OBJ), CLASS-E<gt>_lucas(OBJ), CLASS-E<gt>_and(OBJ1, OBJ2), CLASS-E<gt>_or(OBJ1, OBJ2), CLASS-E<gt>_xor(OBJ1, OBJ2), CLASS-E<gt>_sand(OBJ1, OBJ2, SIGN1, SIGN2), CLASS-E<gt>_sor(OBJ1, OBJ2, SIGN1, SIGN2), CLASS-E<gt>_sxor(OBJ1, OBJ2, SIGN1, SIGN2), CLASS-E<gt>_is_zero(OBJ), CLASS-E<gt>_is_one(OBJ), CLASS-E<gt>_is_two(OBJ), CLASS-E<gt>_is_ten(OBJ), CLASS-E<gt>_is_even(OBJ), CLASS-E<gt>_is_odd(OBJ), CLASS-E<gt>_acmp(OBJ1, OBJ2), CLASS-E<gt>_str(OBJ), CLASS-E<gt>_to_bin(OBJ), CLASS-E<gt>_to_oct(OBJ), CLASS-E<gt>_to_hex(OBJ), CLASS-E<gt>_to_bytes(OBJ), CLASS-E<gt>_to_base(OBJ, BASE, COLLSEQ), CLASS-E<gt>_as_bin(OBJ), CLASS-E<gt>_as_oct(OBJ), CLASS-E<gt>_as_hex(OBJ), CLASS-E<gt>_as_bytes(OBJ), CLASS-E<gt>_num(OBJ), CLASS-E<gt>_copy(OBJ), CLASS-E<gt>_len(OBJ), CLASS-E<gt>_zeros(OBJ), CLASS-E<gt>_digit(OBJ, N), CLASS-E<gt>_digitsum(OBJ), CLASS-E<gt>_check(OBJ), CLASS-E<gt>_set(OBJ) =item API version 2 CLASS-E<gt>_1ex(N), CLASS-E<gt>_nok(OBJ1, OBJ2), CLASS-E<gt>_alen(OBJ) =back =item WRAP YOUR OWN =item BUGS =item SUPPORT RT: CPAN's request tracker, AnnoCPAN: Annotated CPAN documentation, CPAN Ratings, MetaCPAN, CPAN Testers Matrix, The Bignum mailing list, Post to mailing list, View mailing list, Subscribe/Unsubscribe =item LICENSE =item AUTHOR =item SEE ALSO =back =head2 Math::BigRat - Arbitrary big rational numbers =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item MATH LIBRARY =back =item METHODS new(), numerator(), denominator(), parts(), numify(), as_int(), as_number(), as_float(), as_hex(), as_bin(), as_oct(), from_hex(), from_oct(), from_bin(), bnan(), bzero(), binf(), bone(), length(), digit(), bnorm(), bfac(), bround()/round()/bfround(), bmod(), bmodinv(), bmodpow(), bneg(), is_one(), is_zero(), is_pos()/is_positive(), is_neg()/is_negative(), is_int(), is_odd(), is_even(), bceil(), bfloor(), bint(), bsqrt(), broot(), badd(), bmul(), bsub(), bdiv(), bdec(), binc(), copy(), bstr()/bsstr(), bcmp(), bacmp(), beq(), bne(), blt(), ble(), bgt(), bge(), blsft()/brsft(), band(), bior(), bxor(), bnot(), bpow(), blog(), bexp(), bnok(), config() =item BUGS =item SUPPORT RT: CPAN's request tracker, AnnoCPAN: Annotated CPAN documentation, CPAN Ratings, Search CPAN, CPAN Testers Matrix, The Bignum mailing list, Post to mailing list, View mailing list, Subscribe/Unsubscribe =item LICENSE =item SEE ALSO =item AUTHORS =back =head2 Math::Complex - complex numbers and associated mathematical functions =over 4 =item SYNOPSIS =item DESCRIPTION =item OPERATIONS =item CREATION =item DISPLAYING =over 4 =item CHANGED IN PERL 5.6 =back =item USAGE =item CONSTANTS =over 4 =item PI =item Inf =back =item ERRORS DUE TO DIVISION BY ZERO OR LOGARITHM OF ZERO =item ERRORS DUE TO INDIGESTIBLE ARGUMENTS =item BUGS =item SEE ALSO =item AUTHORS =item LICENSE =back =head2 Math::Trig - trigonometric functions =over 4 =item SYNOPSIS =item DESCRIPTION =item TRIGONOMETRIC FUNCTIONS B<tan> =over 4 =item ERRORS DUE TO DIVISION BY ZERO =item SIMPLE (REAL) ARGUMENTS, COMPLEX RESULTS =back =item PLANE ANGLE CONVERSIONS deg2rad, grad2rad, rad2deg, grad2deg, deg2grad, rad2grad, rad2rad, deg2deg, grad2grad =item RADIAL COORDINATE CONVERSIONS =over 4 =item COORDINATE SYSTEMS =item 3-D ANGLE CONVERSIONS cartesian_to_cylindrical, cartesian_to_spherical, cylindrical_to_cartesian, cylindrical_to_spherical, spherical_to_cartesian, spherical_to_cylindrical =back =item GREAT CIRCLE DISTANCES AND DIRECTIONS =over 4 =item great_circle_distance =item great_circle_direction =item great_circle_bearing =item great_circle_destination =item great_circle_midpoint =item great_circle_waypoint =back =item EXAMPLES =over 4 =item CAVEAT FOR GREAT CIRCLE FORMULAS =item Real-valued asin and acos asin_real, acos_real =back =item BUGS =item AUTHORS =item LICENSE =back =head2 Memoize - Make functions faster by trading space for time =over 4 =item SYNOPSIS =item DESCRIPTION =item DETAILS =item OPTIONS =over 4 =item INSTALL =item NORMALIZER =item C<SCALAR_CACHE>, C<LIST_CACHE> C<MEMORY>, C<HASH>, C<TIE>, C<FAULT>, C<MERGE> =back =item OTHER FACILITIES =over 4 =item C<unmemoize> =item C<flush_cache> =back =item CAVEATS =item PERSISTENT CACHE SUPPORT =item EXPIRATION SUPPORT =item BUGS =item MAILING LIST =item AUTHOR =item COPYRIGHT AND LICENSE =item THANK YOU =back =head2 Memoize::AnyDBM_File - glue to provide EXISTS for AnyDBM_File for Storable use =over 4 =item DESCRIPTION =back =head2 Memoize::Expire - Plug-in module for automatic expiration of memoized values =over 4 =item SYNOPSIS =item DESCRIPTION =item INTERFACE TIEHASH, EXISTS, STORE =item ALTERNATIVES =item CAVEATS =item AUTHOR =item SEE ALSO =back =head2 Memoize::ExpireFile - test for Memoize expiration semantics =over 4 =item DESCRIPTION =back =head2 Memoize::ExpireTest - test for Memoize expiration semantics =over 4 =item DESCRIPTION =back =head2 Memoize::NDBM_File - glue to provide EXISTS for NDBM_File for Storable use =over 4 =item DESCRIPTION =back =head2 Memoize::SDBM_File - glue to provide EXISTS for SDBM_File for Storable use =over 4 =item DESCRIPTION =back =head2 Memoize::Storable - store Memoized data in Storable database =over 4 =item DESCRIPTION =back =head2 Module::CoreList - what modules shipped with versions of perl =over 4 =item SYNOPSIS =item DESCRIPTION =item FUNCTIONS API C<first_release( MODULE )>, C<first_release_by_date( MODULE )>, C<find_modules( REGEX, [ LIST OF PERLS ] )>, C<find_version( PERL_VERSION )>, C<is_core( MODULE, [ MODULE_VERSION, [ PERL_VERSION ] ] )>, C<is_deprecated( MODULE, PERL_VERSION )>, C<deprecated_in( MODULE )>, C<removed_from( MODULE )>, C<removed_from_by_date( MODULE )>, C<changes_between( PERL_VERSION, PERL_VERSION )> =item DATA STRUCTURES C<%Module::CoreList::version>, C<%Module::CoreList::delta>, C<%Module::CoreList::released>, C<%Module::CoreList::families>, C<%Module::CoreList::deprecated>, C<%Module::CoreList::upstream>, C<%Module::CoreList::bug_tracker> =item CAVEATS =item HISTORY =item AUTHOR =item LICENSE =item SEE ALSO =back =head2 Module::CoreList::Utils - what utilities shipped with versions of perl =over 4 =item SYNOPSIS =item DESCRIPTION =item FUNCTIONS API C<utilities>, C<first_release( UTILITY )>, C<first_release_by_date( UTILITY )>, C<removed_from( UTILITY )>, C<removed_from_by_date( UTILITY )> =item DATA STRUCTURES C<%Module::CoreList::Utils::utilities> =item AUTHOR =item LICENSE =item SEE ALSO =back =head2 Module::Load - runtime require of both modules and files =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Difference between C<load> and C<autoload> =back =item FUNCTIONS load, autoload, load_remote, autoload_remote =item Rules =item IMPORTS THE FUNCTIONS "load","autoload","load_remote","autoload_remote", 'all', '','none',undef =item Caveats =item SEE ALSO =item ACKNOWLEDGEMENTS =item BUG REPORTS =item AUTHOR =item COPYRIGHT =back =head2 Module::Load::Conditional - Looking up module information / loading at runtime =over 4 =item SYNOPSIS =item DESCRIPTION =item Methods =over 4 =item $href = check_install( module => NAME [, version => VERSION, verbose => BOOL ] ); module, version, verbose, file, dir, version, uptodate =back =back =over 4 =item $bool = can_load( modules => { NAME => VERSION [,NAME => VERSION] }, [verbose => BOOL, nocache => BOOL, autoload => BOOL] ) modules, verbose, nocache, autoload =back =over 4 =item @list = requires( MODULE ); =back =over 4 =item Global Variables =over 4 =item $Module::Load::Conditional::VERBOSE =item $Module::Load::Conditional::FIND_VERSION =item $Module::Load::Conditional::CHECK_INC_HASH =item $Module::Load::Conditional::FORCE_SAFE_INC =item $Module::Load::Conditional::CACHE =item $Module::Load::Conditional::ERROR =item $Module::Load::Conditional::DEPRECATED =back =item See Also =item BUG REPORTS =item AUTHOR =item COPYRIGHT =back =head2 Module::Loaded - mark modules as loaded or unloaded =over 4 =item SYNOPSIS =item DESCRIPTION =item FUNCTIONS =over 4 =item $bool = mark_as_loaded( PACKAGE ); =back =back =over 4 =item $bool = mark_as_unloaded( PACKAGE ); =back =over 4 =item $loc = is_loaded( PACKAGE ); =back =over 4 =item BUG REPORTS =item AUTHOR =item COPYRIGHT =back =head2 Module::Metadata - Gather package and POD information from perl module files =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item CLASS METHODS =over 4 =item C<< new_from_file($filename, collect_pod => 1, decode_pod => 1) >> =item C<< new_from_handle($handle, $filename, collect_pod => 1, decode_pod => 1) >> =item C<< new_from_module($module, collect_pod => 1, inc => \@dirs, decode_pod => 1) >> =item C<< find_module_by_name($module, \@dirs) >> =item C<< find_module_dir_by_name($module, \@dirs) >> =item C<< provides( %options ) >> version B<(required)>, dir, files, prefix =item C<< package_versions_from_directory($dir, \@files?) >> =item C<< log_info (internal) >> =back =item OBJECT METHODS =over 4 =item C<< name() >> =item C<< version($package) >> =item C<< filename() >> =item C<< packages_inside() >> =item C<< pod_inside() >> =item C<< contains_pod() >> =item C<< pod($section) >> =item C<< is_indexable($package) >> or C<< is_indexable() >> =back =item SUPPORT =item AUTHOR =item CONTRIBUTORS =item COPYRIGHT & LICENSE =back =head2 NDBM_File - Tied access to ndbm files =over 4 =item SYNOPSIS =item DESCRIPTION C<O_RDONLY>, C<O_WRONLY>, C<O_RDWR> =item DIAGNOSTICS =over 4 =item C<ndbm store returned -1, errno 22, key "..." at ...> =back =item SECURITY AND PORTABILITY =item BUGS AND WARNINGS =back =head2 NEXT - Provide a pseudo-class NEXT (et al) that allows method redispatch =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Enforcing redispatch =item Avoiding repetitions =item Invoking all versions of a method with a single call =item Using C<EVERY> methods =back =item SEE ALSO =item AUTHOR =item BUGS AND IRRITATIONS =item COPYRIGHT =back =head2 Net::Cmd - Network Command class (as used by FTP, SMTP etc) =over 4 =item SYNOPSIS =item DESCRIPTION =item USER METHODS debug ( VALUE ), message (), code (), ok (), status (), datasend ( DATA ), dataend () =item CLASS METHODS debug_print ( DIR, TEXT ), debug_text ( DIR, TEXT ), command ( CMD [, ARGS, ... ]), unsupported (), response (), parse_response ( TEXT ), getline (), ungetline ( TEXT ), rawdatasend ( DATA ), read_until_dot (), tied_fh () =item PSEUDO RESPONSES Initial value, Connection closed, Timeout =item EXPORTS =item AUTHOR =item COPYRIGHT =item LICENCE =back =head2 Net::Config - Local configuration data for libnet =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS requires_firewall ( HOST ) =item NetConfig VALUES nntp_hosts, snpp_hosts, pop3_hosts, smtp_hosts, ph_hosts, daytime_hosts, time_hosts, inet_domain, ftp_firewall, ftp_firewall_type, 0Z<>, 1Z<>, 2Z<>, 3Z<>, 4Z<>, 5Z<>, 6Z<>, 7Z<>, ftp_ext_passive, ftp_int_passive, local_netmask, test_hosts, test_exists =item AUTHOR =item COPYRIGHT =item LICENCE =back =head2 Net::Domain - Attempt to evaluate the current host's internet name and domain =over 4 =item SYNOPSIS =item DESCRIPTION hostfqdn (), domainname (), hostname (), hostdomain () =item AUTHOR =item COPYRIGHT =item LICENCE =back =head2 Net::FTP - FTP Client class =over 4 =item SYNOPSIS =item DESCRIPTION =item OVERVIEW =item CONSTRUCTOR new ([ HOST ] [, OPTIONS ]) =item METHODS login ([LOGIN [,PASSWORD [, ACCOUNT] ] ]), starttls (), stoptls (), prot ( LEVEL ), host (), account( ACCT ), authorize ( [AUTH [, RESP]]), site (ARGS), ascii (), binary (), type ( [ TYPE ] ), rename ( OLDNAME, NEWNAME ), delete ( FILENAME ), cwd ( [ DIR ] ), cdup (), passive ( [ PASSIVE ] ), pwd (), restart ( WHERE ), rmdir ( DIR [, RECURSE ]), mkdir ( DIR [, RECURSE ]), alloc ( SIZE [, RECORD_SIZE] ), ls ( [ DIR ] ), dir ( [ DIR ] ), get ( REMOTE_FILE [, LOCAL_FILE [, WHERE]] ), put ( LOCAL_FILE [, REMOTE_FILE ] ), put_unique ( LOCAL_FILE [, REMOTE_FILE ] ), append ( LOCAL_FILE [, REMOTE_FILE ] ), unique_name (), mdtm ( FILE ), size ( FILE ), supported ( CMD ), hash ( [FILEHANDLE_GLOB_REF],[ BYTES_PER_HASH_MARK] ), feature ( NAME ), nlst ( [ DIR ] ), list ( [ DIR ] ), retr ( FILE ), stor ( FILE ), stou ( FILE ), appe ( FILE ), port ( [ PORT ] ), eprt ( [ PORT ] ), pasv (), epsv (), pasv_xfer ( SRC_FILE, DEST_SERVER [, DEST_FILE ] ), pasv_xfer_unique ( SRC_FILE, DEST_SERVER [, DEST_FILE ] ), pasv_wait ( NON_PASV_SERVER ), abort (), quit () =over 4 =item Methods for the adventurous quot (CMD [,ARGS]), can_inet6 (), can_ssl () =back =item THE dataconn CLASS =item UNIMPLEMENTED B<SMNT>, B<HELP>, B<MODE>, B<SYST>, B<STAT>, B<STRU>, B<REIN> =item REPORTING BUGS =item AUTHOR =item SEE ALSO =item USE EXAMPLES http://www.csh.rit.edu/~adam/Progs/ =item CREDITS =item COPYRIGHT =item LICENCE =back =head2 Net::NNTP - NNTP Client class =over 4 =item SYNOPSIS =item DESCRIPTION =item CONSTRUCTOR new ( [ HOST ] [, OPTIONS ]) =item METHODS host (), starttls (), article ( [ MSGID|MSGNUM ], [FH] ), body ( [ MSGID|MSGNUM ], [FH] ), head ( [ MSGID|MSGNUM ], [FH] ), articlefh ( [ MSGID|MSGNUM ] ), bodyfh ( [ MSGID|MSGNUM ] ), headfh ( [ MSGID|MSGNUM ] ), nntpstat ( [ MSGID|MSGNUM ] ), group ( [ GROUP ] ), help ( ), ihave ( MSGID [, MESSAGE ]), last (), date (), postok (), authinfo ( USER, PASS ), authinfo_simple ( USER, PASS ), list (), newgroups ( SINCE [, DISTRIBUTIONS ]), newnews ( SINCE [, GROUPS [, DISTRIBUTIONS ]]), next (), post ( [ MESSAGE ] ), postfh (), slave (), quit (), can_inet6 (), can_ssl () =over 4 =item Extension methods newsgroups ( [ PATTERN ] ), distributions (), distribution_patterns (), subscriptions (), overview_fmt (), active_times (), active ( [ PATTERN ] ), xgtitle ( PATTERN ), xhdr ( HEADER, MESSAGE-SPEC ), xover ( MESSAGE-SPEC ), xpath ( MESSAGE-ID ), xpat ( HEADER, PATTERN, MESSAGE-SPEC), xrover (), listgroup ( [ GROUP ] ), reader () =back =item UNSUPPORTED =item DEFINITIONS MESSAGE-SPEC, PATTERN, Examples, C<[^]-]>, C<*bdc>, C<[0-9a-zA-Z]>, C<a??d> =item SEE ALSO =item AUTHOR =item COPYRIGHT =item LICENCE =back =head2 Net::Netrc - OO interface to users netrc file =over 4 =item SYNOPSIS =item DESCRIPTION =item THE .netrc FILE machine name, default, login name, password string, account string, macdef name =item CONSTRUCTOR lookup ( MACHINE [, LOGIN ]) =item METHODS login (), password (), account (), lpa () =item AUTHOR =item SEE ALSO =item COPYRIGHT =item LICENCE =back =head2 Net::POP3 - Post Office Protocol 3 Client class (RFC1939) =over 4 =item SYNOPSIS =item DESCRIPTION =item CONSTRUCTOR new ( [ HOST ] [, OPTIONS ] ) =item METHODS host (), auth ( USERNAME, PASSWORD ), user ( USER ), pass ( PASS ), login ( [ USER [, PASS ]] ), starttls ( SSLARGS ), apop ( [ USER [, PASS ]] ), banner (), capa (), capabilities (), top ( MSGNUM [, NUMLINES ] ), list ( [ MSGNUM ] ), get ( MSGNUM [, FH ] ), getfh ( MSGNUM ), last (), popstat (), ping ( USER ), uidl ( [ MSGNUM ] ), delete ( MSGNUM ), reset (), quit (), can_inet6 (), can_ssl () =item NOTES =item SEE ALSO =item AUTHOR =item COPYRIGHT =item LICENCE =back =head2 Net::Ping - check a remote host for reachability =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Functions Net::Ping->new([proto, timeout, bytes, device, tos, ttl, family, host, port, bind, gateway, retrans, pingstring, source_verify econnrefused dontfrag IPV6_USE_MIN_MTU IPV6_RECVPATHMTU]) X<new>, $p->ping($host [, $timeout [, $family]]); X<ping>, $p->source_verify( { 0 | 1 } ); X<source_verify>, $p->service_check( { 0 | 1 } ); X<service_check>, $p->tcp_service_check( { 0 | 1 } ); X<tcp_service_check>, $p->hires( { 0 | 1 } ); X<hires>, $p->time X<time>, $p->socket_blocking_mode( $fh, $mode ); X<socket_blocking_mode>, $p->IPV6_USE_MIN_MTU X<IPV6_USE_MIN_MTU>, $p->IPV6_RECVPATHMTU X<IPV6_RECVPATHMTU>, $p->IPV6_HOPLIMIT X<IPV6_HOPLIMIT>, $p->IPV6_REACHCONF I<NYI> X<IPV6_REACHCONF>, $p->bind($local_addr); X<bind>, $p->message_type([$ping_type]); X<message_type>, $p->open($host); X<open>, $p->ack( [ $host ] ); X<ack>, $p->nack( $failed_ack_host ); X<nack>, $p->ack_unfork($host) X<ack_unfork>, $p->ping_icmp([$host, $timeout, $family]) X<ping_icmp>, $p->ping_icmpv6([$host, $timeout, $family]) I<NYI> X<ping_icmpv6>, $p->ping_stream([$host, $timeout, $family]) X<ping_stream>, $p->ping_syn([$host, $ip, $start_time, $stop_time]) X<ping_syn>, $p->ping_syn_fork([$host, $timeout, $family]) X<ping_syn_fork>, $p->ping_tcp([$host, $timeout, $family]) X<ping_tcp>, $p->ping_udp([$host, $timeout, $family]) X<ping_udp>, $p->ping_external([$host, $timeout, $family]) X<ping_external>, $p->tcp_connect([$ip, $timeout]) X<tcp_connect>, $p->tcp_echo([$ip, $timeout, $pingstring]) X<tcp_echo>, $p->close(); X<close>, $p->port_number([$port_number]) X<port_number>, $p->mselect X<mselect>, $p->ntop X<ntop>, $p->checksum($msg) X<checksum>, $p->icmp_result X<icmp_result>, pingecho($host [, $timeout]); X<pingecho>, wakeonlan($mac, [$host, [$port]]) X<wakeonlan> =back =item NOTES =item INSTALL =item BUGS =item AUTHORS =item COPYRIGHT =back =head2 Net::SMTP - Simple Mail Transfer Protocol Client =over 4 =item SYNOPSIS =item DESCRIPTION =item EXAMPLES =item CONSTRUCTOR new ( [ HOST ] [, OPTIONS ] ) =item METHODS banner (), domain (), hello ( DOMAIN ), host (), etrn ( DOMAIN ), starttls ( SSLARGS ), auth ( USERNAME, PASSWORD ), auth ( SASL ), mail ( ADDRESS [, OPTIONS] ), send ( ADDRESS ), send_or_mail ( ADDRESS ), send_and_mail ( ADDRESS ), reset (), recipient ( ADDRESS [, ADDRESS, [...]] [, OPTIONS ] ), to ( ADDRESS [, ADDRESS [...]] ), cc ( ADDRESS [, ADDRESS [...]] ), bcc ( ADDRESS [, ADDRESS [...]] ), data ( [ DATA ] ), bdat ( DATA ), bdatlast ( DATA ), expand ( ADDRESS ), verify ( ADDRESS ), help ( [ $subject ] ), quit (), can_inet6 (), can_ssl () =item ADDRESSES =item SEE ALSO =item AUTHOR =item COPYRIGHT =item LICENCE =back =head2 Net::Time - time and daytime network client interface =over 4 =item SYNOPSIS =item DESCRIPTION inet_time ( [HOST [, PROTOCOL [, TIMEOUT]]]), inet_daytime ( [HOST [, PROTOCOL [, TIMEOUT]]]) =item AUTHOR =item COPYRIGHT =item LICENCE =back =head2 Net::hostent - by-name interface to Perl's built-in gethost*() functions =over 4 =item SYNOPSIS =item DESCRIPTION =item EXAMPLES =item NOTE =item AUTHOR =back =head2 Net::libnetFAQ, libnetFAQ - libnet Frequently Asked Questions =over 4 =item DESCRIPTION =over 4 =item Where to get this document =item How to contribute to this document =back =item Author and Copyright Information =over 4 =item Disclaimer =back =item Obtaining and installing libnet =over 4 =item What is libnet ? =item Which version of perl do I need ? =item What other modules do I need ? =item What machines support libnet ? =item Where can I get the latest libnet release =back =item Using Net::FTP =over 4 =item How do I download files from an FTP server ? =item How do I transfer files in binary mode ? =item How can I get the size of a file on a remote FTP server ? =item How can I get the modification time of a file on a remote FTP server ? =item How can I change the permissions of a file on a remote server ? =item Can I do a reget operation like the ftp command ? =item How do I get a directory listing from an FTP server ? =item Changing directory to "" does not fail ? =item I am behind a SOCKS firewall, but the Firewall option does not work ? =item I am behind an FTP proxy firewall, but cannot access machines outside ? =item My ftp proxy firewall does not listen on port 21 =item Is it possible to change the file permissions of a file on an FTP server ? =item I have seen scripts call a method message, but cannot find it documented ? =item Why does Net::FTP not implement mput and mget methods =back =item Using Net::SMTP =over 4 =item Why can't the part of an Email address after the @ be used as the hostname ? =item Why does Net::SMTP not do DNS MX lookups ? =item The verify method always returns true ? =back =item Debugging scripts =over 4 =item How can I debug my scripts that use Net::* modules ? =back =item AUTHOR AND COPYRIGHT =back =head2 Net::netent - by-name interface to Perl's built-in getnet*() functions =over 4 =item SYNOPSIS =item DESCRIPTION =item EXAMPLES =item NOTE =item AUTHOR =back =head2 Net::protoent - by-name interface to Perl's built-in getproto*() functions =over 4 =item SYNOPSIS =item DESCRIPTION =item NOTE =item AUTHOR =back =head2 Net::servent - by-name interface to Perl's built-in getserv*() functions =over 4 =item SYNOPSIS =item DESCRIPTION =item EXAMPLES =item NOTE =item AUTHOR =back =head2 O - Generic interface to Perl Compiler backends =over 4 =item SYNOPSIS =item DESCRIPTION =item CONVENTIONS =item IMPLEMENTATION =item BUGS =item AUTHOR =back =head2 ODBM_File - Tied access to odbm files =over 4 =item SYNOPSIS =item DESCRIPTION C<O_RDONLY>, C<O_WRONLY>, C<O_RDWR> =item DIAGNOSTICS =over 4 =item C<odbm store returned -1, errno 22, key "..." at ...> =back =item SECURITY AND PORTABILITY =item BUGS AND WARNINGS =back =head2 Opcode - Disable named opcodes when compiling perl code =over 4 =item SYNOPSIS =item DESCRIPTION =item NOTE =item WARNING =item Operator Names and Operator Lists an operator name (opname), an operator tag name (optag), a negated opname or optag, an operator set (opset) =item Opcode Functions opcodes, opset (OP, ...), opset_to_ops (OPSET), opset_to_hex (OPSET), full_opset, empty_opset, invert_opset (OPSET), verify_opset (OPSET, ...), define_optag (OPTAG, OPSET), opmask_add (OPSET), opmask, opdesc (OP, ...), opdump (PAT) =item Manipulating Opsets =item TO DO (maybe) =back =over 4 =item Predefined Opcode Tags :base_core, :base_mem, :base_loop, :base_io, :base_orig, :base_math, :base_thread, :default, :filesys_read, :sys_db, :browse, :filesys_open, :filesys_write, :subprocess, :ownprocess, :others, :load, :still_to_be_decided, :dangerous =item SEE ALSO =item AUTHORS =back =head2 POSIX - Perl interface to IEEE Std 1003.1 =over 4 =item SYNOPSIS =item DESCRIPTION =item CAVEATS =item FUNCTIONS C<_exit>, C<abort>, C<abs>, C<access>, C<acos>, C<acosh>, C<alarm>, C<asctime>, C<asin>, C<asinh>, C<assert>, C<atan>, C<atanh>, C<atan2>, C<atexit>, C<atof>, C<atoi>, C<atol>, C<bsearch>, C<calloc>, C<cbrt>, C<ceil>, C<chdir>, C<chmod>, C<chown>, C<clearerr>, C<clock>, C<close>, C<closedir>, C<cos>, C<cosh>, C<copysign>, C<creat>, C<ctermid>, C<ctime>, C<cuserid> [POSIX.1-1988], C<difftime>, C<div>, C<dup>, C<dup2>, C<erf>, C<erfc>, C<errno>, C<execl>, C<execle>, C<execlp>, C<execv>, C<execve>, C<execvp>, C<exit>, C<exp>, C<expm1>, C<fabs>, C<fclose>, C<fcntl>, C<fdopen>, C<feof>, C<ferror>, C<fflush>, C<fgetc>, C<fgetpos>, C<fgets>, C<fileno>, C<floor>, C<fdim>, C<fegetround>, C<fesetround>, C<fma>, C<fmax>, C<fmin>, C<fmod>, C<fopen>, C<fork>, C<fpathconf>, C<fpclassify>, C<fprintf>, C<fputc>, C<fputs>, C<fread>, C<free>, C<freopen>, C<frexp>, C<fscanf>, C<fseek>, C<fsetpos>, C<fstat>, C<fsync>, C<ftell>, C<fwrite>, C<getc>, C<getchar>, C<getcwd>, C<getegid>, C<getenv>, C<geteuid>, C<getgid>, C<getgrgid>, C<getgrnam>, C<getgroups>, C<getlogin>, C<getpayload>, C<getpgrp>, C<getpid>, C<getppid>, C<getpwnam>, C<getpwuid>, C<gets>, C<getuid>, C<gmtime>, C<hypot>, C<ilogb>, C<Inf>, C<isalnum>, C<isalpha>, C<isatty>, C<iscntrl>, C<isdigit>, C<isfinite>, C<isgraph>, C<isgreater>, C<isinf>, C<islower>, C<isnan>, C<isnormal>, C<isprint>, C<ispunct>, C<issignaling>, C<isspace>, C<isupper>, C<isxdigit>, C<j0>, C<j1>, C<jn>, C<y0>, C<y1>, C<yn>, C<kill>, C<labs>, C<lchown>, C<ldexp>, C<ldiv>, C<lgamma>, C<log1p>, C<log2>, C<logb>, C<link>, C<localeconv>, C<localtime>, C<log>, C<log10>, C<longjmp>, C<lseek>, C<lrint>, C<lround>, C<malloc>, C<mblen>, C<mbtowc>, C<memchr>, C<memcmp>, C<memcpy>, C<memmove>, C<memset>, C<mkdir>, C<mkfifo>, C<mktime>, C<modf>, C<NaN>, C<nan>, C<nearbyint>, C<nextafter>, C<nexttoward>, C<nice>, C<offsetof>, C<open>, C<opendir>, C<pathconf>, C<pause>, C<perror>, C<pipe>, C<pow>, C<printf>, C<putc>, C<putchar>, C<puts>, C<qsort>, C<raise>, C<rand>, C<read>, C<readdir>, C<realloc>, C<remainder>, C<remove>, C<remquo>, C<rename>, C<rewind>, C<rewinddir>, C<rint>, C<rmdir>, C<round>, C<scalbn>, C<scanf>, C<setgid>, C<setjmp>, C<setlocale>, C<setpayload>, C<setpayloadsig>, C<setpgid>, C<setsid>, C<setuid>, C<sigaction>, C<siglongjmp>, C<signbit>, C<sigpending>, C<sigprocmask>, C<sigsetjmp>, C<sigsuspend>, C<sin>, C<sinh>, C<sleep>, C<sprintf>, C<sqrt>, C<srand>, C<sscanf>, C<stat>, C<strcat>, C<strchr>, C<strcmp>, C<strcoll>, C<strcpy>, C<strcspn>, C<strerror>, C<strftime>, C<strlen>, C<strncat>, C<strncmp>, C<strncpy>, C<strpbrk>, C<strrchr>, C<strspn>, C<strstr>, C<strtod>, C<strtok>, C<strtol>, C<strtold>, C<strtoul>, C<strxfrm>, C<sysconf>, C<system>, C<tan>, C<tanh>, C<tcdrain>, C<tcflow>, C<tcflush>, C<tcgetpgrp>, C<tcsendbreak>, C<tcsetpgrp>, C<tgamma>, C<time>, C<times>, C<tmpfile>, C<tmpnam>, C<tolower>, C<toupper>, C<trunc>, C<ttyname>, C<tzname>, C<tzset>, C<umask>, C<uname>, C<ungetc>, C<unlink>, C<utime>, C<vfprintf>, C<vprintf>, C<vsprintf>, C<wait>, C<waitpid>, C<wctomb>, C<write> =item CLASSES =over 4 =item C<POSIX::SigAction> C<new>, C<handler>, C<mask>, C<flags>, C<safe> =item C<POSIX::SigRt> C<%SIGRT>, C<SIGRTMIN>, C<SIGRTMAX> =item C<POSIX::SigSet> C<new>, C<addset>, C<delset>, C<emptyset>, C<fillset>, C<ismember> =item C<POSIX::Termios> C<new>, C<getattr>, C<getcc>, C<getcflag>, C<getiflag>, C<getispeed>, C<getlflag>, C<getoflag>, C<getospeed>, C<setattr>, C<setcc>, C<setcflag>, C<setiflag>, C<setispeed>, C<setlflag>, C<setoflag>, C<setospeed>, Baud rate values, Terminal interface values, C<c_cc> field values, C<c_cflag> field values, C<c_iflag> field values, C<c_lflag> field values, C<c_oflag> field values =back =item PATHNAME CONSTANTS Constants =item POSIX CONSTANTS Constants =item RESOURCE CONSTANTS Constants =item SYSTEM CONFIGURATION Constants =item ERRNO Constants =item FCNTL Constants =item FLOAT Constants =item FLOATING-POINT ENVIRONMENT Constants =item LIMITS Constants =item LOCALE Constants =item MATH Constants =item SIGNAL Constants =item STAT Constants, Macros =item STDLIB Constants =item STDIO Constants =item TIME Constants =item UNISTD Constants =item WAIT Constants, C<WNOHANG>, C<WUNTRACED>, Macros, C<WIFEXITED>, C<WEXITSTATUS>, C<WIFSIGNALED>, C<WTERMSIG>, C<WIFSTOPPED>, C<WSTOPSIG> =item WINSOCK Constants =back =head2 Params::Check - A generic input parsing/checking mechanism. =over 4 =item SYNOPSIS =item DESCRIPTION =item Template default, required, strict_type, defined, no_override, store, allow =item Functions =over 4 =item check( \%tmpl, \%args, [$verbose] ); Template, Arguments, Verbose =back =back =over 4 =item allow( $test_me, \@criteria ); string, regexp, subroutine, array ref =back =over 4 =item last_error() =back =over 4 =item Global Variables =over 4 =item $Params::Check::VERBOSE =item $Params::Check::STRICT_TYPE =item $Params::Check::ALLOW_UNKNOWN =item $Params::Check::STRIP_LEADING_DASHES =item $Params::Check::NO_DUPLICATES =item $Params::Check::PRESERVE_CASE =item $Params::Check::ONLY_ALLOW_DEFINED =item $Params::Check::SANITY_CHECK_TEMPLATE =item $Params::Check::WARNINGS_FATAL =item $Params::Check::CALLER_DEPTH =back =item Acknowledgements =item BUG REPORTS =item AUTHOR =item COPYRIGHT =back =head2 Parse::CPAN::Meta - Parse META.yml and META.json CPAN metadata files =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item load_file =item load_yaml_string =item load_json_string =item load_string =item yaml_backend =item json_backend =item json_decoder =back =item FUNCTIONS =over 4 =item Load =item LoadFile =back =item ENVIRONMENT =over 4 =item CPAN_META_JSON_DECODER =item CPAN_META_JSON_BACKEND =item PERL_JSON_BACKEND =item PERL_YAML_BACKEND =back =item AUTHORS =item COPYRIGHT AND LICENSE =back =head2 Perl::OSType - Map Perl operating system names to generic types =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item USAGE =over 4 =item os_type() =item is_os_type() =back =item SEE ALSO =item SUPPORT =over 4 =item Bugs / Feature Requests =item Source Code =back =item AUTHOR =item CONTRIBUTORS =item COPYRIGHT AND LICENSE =back =head2 PerlIO - On demand loader for PerlIO layers and root of PerlIO::* name space =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Layers :unix, :stdio, :perlio, :crlf, :utf8, :bytes, :raw, :pop, :win32 =item Custom Layers :encoding, :mmap, :via, :scalar =item Alternatives to raw =item Defaults and how to override them =item Querying the layers of filehandles =back =item AUTHOR =item SEE ALSO =back =head2 PerlIO::encoding - encoding layer =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =back =head2 PerlIO::mmap - Memory mapped IO =over 4 =item SYNOPSIS =item DESCRIPTION =item IMPLEMENTATION NOTE =back =head2 PerlIO::scalar - in-memory IO, scalar IO =over 4 =item SYNOPSIS =item DESCRIPTION =item IMPLEMENTATION NOTE =back =head2 PerlIO::via - Helper class for PerlIO layers implemented in perl =over 4 =item SYNOPSIS =item DESCRIPTION =item EXPECTED METHODS $class->PUSHED([$mode,[$fh]]), $obj->POPPED([$fh]), $obj->UTF8($belowFlag,[$fh]), $obj->OPEN($path,$mode,[$fh]), $obj->BINMODE([$fh]), $obj->FDOPEN($fd,[$fh]), $obj->SYSOPEN($path,$imode,$perm,[$fh]), $obj->FILENO($fh), $obj->READ($buffer,$len,$fh), $obj->WRITE($buffer,$fh), $obj->FILL($fh), $obj->CLOSE($fh), $obj->SEEK($posn,$whence,$fh), $obj->TELL($fh), $obj->UNREAD($buffer,$fh), $obj->FLUSH($fh), $obj->SETLINEBUF($fh), $obj->CLEARERR($fh), $obj->ERROR($fh), $obj->EOF($fh) =item EXAMPLES =over 4 =item Example - a Hexadecimal Handle =back =back =head2 PerlIO::via::QuotedPrint - PerlIO layer for quoted-printable strings =over 4 =item SYNOPSIS =item VERSION =item DESCRIPTION =item REQUIRED MODULES =item SEE ALSO =item ACKNOWLEDGEMENTS =item COPYRIGHT =back =head2 Pod::Checker - check pod documents for syntax errors =over 4 =item SYNOPSIS =item OPTIONS/ARGUMENTS =over 4 =item podchecker() B<-warnings> =E<gt> I<val>, B<-quiet> =E<gt> I<val> =back =item DESCRIPTION =item DIAGNOSTICS =over 4 =item Errors empty =headn, =over on line I<N> without closing =back, You forgot a '=back' before '=headI<N>', =over is the last thing in the document?!, '=item' outside of any '=over', =back without =over, Can't have a 0 in =over I<N>, =over should be: '=over' or '=over positive_number', =begin I<TARGET> without matching =end I<TARGET>, =begin without a target?, =end I<TARGET> without matching =begin, '=end' without a target?, '=end I<TARGET>' is invalid, =end I<CONTENT> doesn't match =begin I<TARGET>, =for without a target?, unresolved internal link I<NAME>, Unknown directive: I<CMD>, Deleting unknown formatting code I<SEQ>, Unterminated I<SEQ>E<lt>E<gt> sequence, An EE<lt>...E<gt> surrounding strange content, An empty EE<lt>E<gt>, An empty C<< LE<lt>E<gt> >>, An empty XE<lt>E<gt>, A non-empty ZE<lt>E<gt>, Spurious text after =pod / =cut, =back doesn't take any parameters, but you said =back I<ARGUMENT>, =pod directives shouldn't be over one line long! Ignoring all I<N> lines of content, =cut found outside a pod block, Invalid =encoding syntax: I<CONTENT> =item Warnings nested commands I<CMD>E<lt>...I<CMD>E<lt>...E<gt>...E<gt>, multiple occurrences (I<N>) of link target I<name>, line containing nothing but whitespace in paragraph, =item has no contents, You can't have =items (as at line I<N>) unless the first thing after the =over is an =item, Expected '=item I<EXPECTED VALUE>', Expected '=item *', Possible =item type mismatch: 'I<x>' found leading a supposed definition =item, You have '=item x' instead of the expected '=item I<N>', Unknown E content in EE<lt>I<CONTENT>E<gt>, empty =over/=back block, empty section in previous paragraph, Verbatim paragraph in NAME section, =headI<n> without preceding higher level =item Hyperlinks ignoring leading/trailing whitespace in link, alternative text/node '%s' contains non-escaped | or / =back =item RETURN VALUE =item EXAMPLES =item SCRIPTS =item INTERFACE =back C<Pod::Checker-E<gt>new( %options )> C<$checker-E<gt>poderror( @args )>, C<$checker-E<gt>poderror( {%opts}, @args )> C<$checker-E<gt>num_errors()> C<$checker-E<gt>num_warnings()> C<$checker-E<gt>name()> C<$checker-E<gt>node()> C<$checker-E<gt>idx()> C<$checker-E<gt>hyperlinks()> line() type() page() node() =over 4 =item AUTHOR =back =head2 Pod::Escapes - for resolving Pod EE<lt>...E<gt> sequences =over 4 =item SYNOPSIS =item DESCRIPTION =item GOODIES e2char($e_content), e2charnum($e_content), $Name2character{I<name>}, $Name2character_number{I<name>}, $Latin1Code_to_fallback{I<integer>}, $Latin1Char_to_fallback{I<character>}, $Code2USASCII{I<integer>} =item CAVEATS =item SEE ALSO =item REPOSITORY =item COPYRIGHT AND DISCLAIMERS =item AUTHOR =back =head2 Pod::Html - module to convert pod files to HTML =over 4 =item SYNOPSIS =item DESCRIPTION =item FUNCTIONS =over 4 =item pod2html backlink, cachedir, css, flush, header, help, htmldir, htmlroot, index, infile, outfile, poderrors, podpath, podroot, quiet, recurse, title, verbose =item htmlify =item anchorify =back =item ENVIRONMENT =item AUTHOR =item SEE ALSO =item COPYRIGHT =back =head2 Pod::Man - Convert POD data to formatted *roff input =over 4 =item SYNOPSIS =item DESCRIPTION center, date, errors, fixed, fixedbold, fixeditalic, fixedbolditalic, lquote, rquote, name, nourls, quotes, release, section, stderr, utf8 =item DIAGNOSTICS roff font should be 1 or 2 chars, not "%s", Invalid errors setting "%s", Invalid quote specification "%s", POD document had syntax errors =item ENVIRONMENT PERL_CORE, POD_MAN_DATE, SOURCE_DATE_EPOCH =item BUGS =item CAVEATS =item AUTHOR =item COPYRIGHT AND LICENSE =item SEE ALSO =back =head2 Pod::ParseLink - Parse an LE<lt>E<gt> formatting code in POD text =over 4 =item SYNOPSIS =item DESCRIPTION =item AUTHOR =item COPYRIGHT AND LICENSE =item SEE ALSO =back =head2 Pod::Perldoc - Look up Perl documentation in Pod format. =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item COPYRIGHT AND DISCLAIMERS =item AUTHOR =back =head2 Pod::Perldoc::BaseTo - Base for Pod::Perldoc formatters =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item COPYRIGHT AND DISCLAIMERS =item AUTHOR =back =head2 Pod::Perldoc::GetOptsOO - Customized option parser for Pod::Perldoc =over 4 =item SYNOPSIS =item DESCRIPTION Call Pod::Perldoc::GetOptsOO::getopts($object, \@ARGV, $truth), Given -n, if there's a opt_n_with, it'll call $object->opt_n_with( ARGUMENT ) (e.g., "-n foo" => $object->opt_n_with('foo'). Ditto "-nfoo"), Otherwise (given -n) if there's an opt_n, we'll call it $object->opt_n($truth) (Truth defaults to 1), Otherwise we try calling $object->handle_unknown_option('n') (and we increment the error count by the return value of it), If there's no handle_unknown_option, then we just warn, and then increment the error counter =item SEE ALSO =item COPYRIGHT AND DISCLAIMERS =item AUTHOR =back =head2 Pod::Perldoc::ToANSI - render Pod with ANSI color escapes =over 4 =item SYNOPSIS =item DESCRIPTION =item CAVEAT =item SEE ALSO =item COPYRIGHT AND DISCLAIMERS =item AUTHOR =back =head2 Pod::Perldoc::ToChecker - let Perldoc check Pod for errors =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item COPYRIGHT AND DISCLAIMERS =item AUTHOR =back =head2 Pod::Perldoc::ToMan - let Perldoc render Pod as man pages =over 4 =item SYNOPSIS =item DESCRIPTION =item CAVEAT =item SEE ALSO =item COPYRIGHT AND DISCLAIMERS =item AUTHOR =back =head2 Pod::Perldoc::ToNroff - let Perldoc convert Pod to nroff =over 4 =item SYNOPSIS =item DESCRIPTION =item CAVEAT =item SEE ALSO =item COPYRIGHT AND DISCLAIMERS =item AUTHOR =back =head2 Pod::Perldoc::ToPod - let Perldoc render Pod as ... Pod! =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item COPYRIGHT AND DISCLAIMERS =item AUTHOR =back =head2 Pod::Perldoc::ToRtf - let Perldoc render Pod as RTF =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item COPYRIGHT AND DISCLAIMERS =item AUTHOR =back =head2 Pod::Perldoc::ToTerm - render Pod with terminal escapes =over 4 =item SYNOPSIS =item DESCRIPTION =item PAGER FORMATTING =item CAVEAT =item SEE ALSO =item COPYRIGHT AND DISCLAIMERS =item AUTHOR =back =head2 Pod::Perldoc::ToText - let Perldoc render Pod as plaintext =over 4 =item SYNOPSIS =item DESCRIPTION =item CAVEAT =item SEE ALSO =item COPYRIGHT AND DISCLAIMERS =item AUTHOR =back =head2 Pod::Perldoc::ToTk - let Perldoc use Tk::Pod to render Pod =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item AUTHOR =back =head2 Pod::Perldoc::ToXml - let Perldoc render Pod as XML =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item COPYRIGHT AND DISCLAIMERS =item AUTHOR =back =head2 Pod::Simple - framework for parsing Pod =over 4 =item SYNOPSIS =item DESCRIPTION =item MAIN METHODS C<< $parser = I<SomeClass>->new(); >>, C<< $parser->output_fh( *OUT ); >>, C<< $parser->output_string( \$somestring ); >>, C<< $parser->parse_file( I<$some_filename> ); >>, C<< $parser->parse_file( *INPUT_FH ); >>, C<< $parser->parse_string_document( I<$all_content> ); >>, C<< $parser->parse_lines( I<...@lines...>, undef ); >>, C<< $parser->content_seen >>, C<< I<SomeClass>->filter( I<$filename> ); >>, C<< I<SomeClass>->filter( I<*INPUT_FH> ); >>, C<< I<SomeClass>->filter( I<\$document_content> ); >> =item SECONDARY METHODS C<< $parser->parse_characters( I<SOMEVALUE> ) >>, C<< $parser->no_whining( I<SOMEVALUE> ) >>, C<< $parser->no_errata_section( I<SOMEVALUE> ) >>, C<< $parser->complain_stderr( I<SOMEVALUE> ) >>, C<< $parser->source_filename >>, C<< $parser->doc_has_started >>, C<< $parser->source_dead >>, C<< $parser->strip_verbatim_indent( I<SOMEVALUE> ) >>, C<< $parser->expand_verbatim_tabs( I<n> ) >> =item TERTIARY METHODS C<< $parser->abandon_output_fh() >>X<abandon_output_fh>, C<< $parser->abandon_output_string() >>X<abandon_output_string>, C<< $parser->accept_code( @codes ) >>X<accept_code>, C<< $parser->accept_codes( @codes ) >>X<accept_codes>, C<< $parser->accept_directive_as_data( @directives ) >>X<accept_directive_as_data>, C<< $parser->accept_directive_as_processed( @directives ) >>X<accept_directive_as_processed>, C<< $parser->accept_directive_as_verbatim( @directives ) >>X<accept_directive_as_verbatim>, C<< $parser->accept_target( @targets ) >>X<accept_target>, C<< $parser->accept_target_as_text( @targets ) >>X<accept_target_as_text>, C<< $parser->accept_targets( @targets ) >>X<accept_targets>, C<< $parser->accept_targets_as_text( @targets ) >>X<accept_targets_as_text>, C<< $parser->any_errata_seen() >>X<any_errata_seen>, C<< $parser->errata_seen() >>X<errata_seen>, C<< $parser->detected_encoding() >>X<detected_encoding>, C<< $parser->encoding() >>X<encoding>, C<< $parser->parse_from_file( $source, $to ) >>X<parse_from_file>, C<< $parser->scream( @error_messages ) >>X<scream>, C<< $parser->unaccept_code( @codes ) >>X<unaccept_code>, C<< $parser->unaccept_codes( @codes ) >>X<unaccept_codes>, C<< $parser->unaccept_directive( @directives ) >>X<unaccept_directive>, C<< $parser->unaccept_directives( @directives ) >>X<unaccept_directives>, C<< $parser->unaccept_target( @targets ) >>X<unaccept_target>, C<< $parser->unaccept_targets( @targets ) >>X<unaccept_targets>, C<< $parser->version_report() >>X<version_report>, C<< $parser->whine( @error_messages ) >>X<whine> =item ENCODING =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org>, Karl Williamson C<khw@cpan.org>, Gabor Szabo C<szabgab@gmail.com>, Shawn H Corey C<SHCOREY at cpan.org> =back =head2 Pod::Simple::Checker -- check the Pod syntax of a document =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::Debug -- put Pod::Simple into trace/debug mode =over 4 =item SYNOPSIS =item DESCRIPTION =item CAVEATS =item GUTS =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::DumpAsText -- dump Pod-parsing events as text =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::DumpAsXML -- turn Pod into XML =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::HTML - convert Pod to HTML =over 4 =item SYNOPSIS =item DESCRIPTION =item CALLING FROM THE COMMAND LINE =item CALLING FROM PERL =over 4 =item Minimal code =item More detailed example =back =item METHODS =over 4 =item html_css =item html_javascript =item title_prefix =item title_postfix =item html_header_before_title =item top_anchor =item html_h_level =item index =item html_header_after_title =item html_footer =back =item SUBCLASSING =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item ACKNOWLEDGEMENTS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::HTMLBatch - convert several Pod files to several HTML files =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item FROM THE COMMAND LINE =back =item MAIN METHODS $batchconv = Pod::Simple::HTMLBatch->new;, $batchconv->batch_convert( I<indirs>, I<outdir> );, $batchconv->batch_convert( undef , ...);, $batchconv->batch_convert( q{@INC}, ...);, $batchconv->batch_convert( \@dirs , ...);, $batchconv->batch_convert( "somedir" , ...);, $batchconv->batch_convert( 'somedir:someother:also' , ...);, $batchconv->batch_convert( ... , undef );, $batchconv->batch_convert( ... , 'somedir' ); =over 4 =item ACCESSOR METHODS $batchconv->verbose( I<nonnegative_integer> );, $batchconv->index( I<true-or-false> );, $batchconv->contents_file( I<filename> );, $batchconv->contents_page_start( I<HTML_string> );, $batchconv->contents_page_end( I<HTML_string> );, $batchconv->add_css( $url );, $batchconv->add_javascript( $url );, $batchconv->css_flurry( I<true-or-false> );, $batchconv->javascript_flurry( I<true-or-false> );, $batchconv->no_contents_links( I<true-or-false> );, $batchconv->html_render_class( I<classname> );, $batchconv->search_class( I<classname> ); =back =item NOTES ON CUSTOMIZATION =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::JustPod -- just the Pod, the whole Pod, and nothing but the Pod =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::LinkSection -- represent "section" attributes of L codes =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::Methody -- turn Pod::Simple events into method calls =over 4 =item SYNOPSIS =item DESCRIPTION =item METHOD CALLING =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::PullParser -- a pull-parser interface to parsing Pod =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS my $token = $parser->get_token, $parser->unget_token( $token ), $parser->unget_token( $token1, $token2, ... ), $parser->set_source( $filename ), $parser->set_source( $filehandle_object ), $parser->set_source( \$document_source ), $parser->set_source( \@document_lines ), $parser->parse_file(...), $parser->parse_string_document(...), $parser->filter(...), $parser->parse_from_file(...), my $title_string = $parser->get_title, my $title_string = $parser->get_short_title, $author_name = $parser->get_author, $description_name = $parser->get_description, $version_block = $parser->get_version =item NOTE =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::PullParserEndToken -- end-tokens from Pod::Simple::PullParser =over 4 =item SYNOPSIS =item DESCRIPTION $token->tagname, $token->tagname(I<somestring>), $token->tag(...), $token->is_tag(I<somestring>) or $token->is_tagname(I<somestring>) =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::PullParserStartToken -- start-tokens from Pod::Simple::PullParser =over 4 =item SYNOPSIS =item DESCRIPTION $token->tagname, $token->tagname(I<somestring>), $token->tag(...), $token->is_tag(I<somestring>) or $token->is_tagname(I<somestring>), $token->attr(I<attrname>), $token->attr(I<attrname>, I<newvalue>), $token->attr_hash =item SEE ALSO =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::PullParserTextToken -- text-tokens from Pod::Simple::PullParser =over 4 =item SYNOPSIS =item DESCRIPTION $token->text, $token->text(I<somestring>), $token->text_r() =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::PullParserToken -- tokens from Pod::Simple::PullParser =over 4 =item SYNOPSIS =item DESCRIPTION $token->type, $token->is_start, $token->is_text, $token->is_end, $token->dump =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::RTF -- format Pod as RTF =over 4 =item SYNOPSIS =item DESCRIPTION =item FORMAT CONTROL ATTRIBUTES $parser->head1_halfpoint_size( I<halfpoint_integer> );, $parser->head2_halfpoint_size( I<halfpoint_integer> );, $parser->head3_halfpoint_size( I<halfpoint_integer> );, $parser->head4_halfpoint_size( I<halfpoint_integer> );, $parser->codeblock_halfpoint_size( I<halfpoint_integer> );, $parser->header_halfpoint_size( I<halfpoint_integer> );, $parser->normal_halfpoint_size( I<halfpoint_integer> );, $parser->no_proofing_exemptions( I<true_or_false> );, $parser->doc_lang( I<microsoft_decimal_language_code> ) =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::Search - find POD documents in directory trees =over 4 =item SYNOPSIS =item DESCRIPTION =item CONSTRUCTOR =item ACCESSORS $search->inc( I<true-or-false> );, $search->verbose( I<nonnegative-number> );, $search->limit_glob( I<some-glob-string> );, $search->callback( I<\&some_routine> );, $search->laborious( I<true-or-false> );, $search->recurse( I<true-or-false> );, $search->shadows( I<true-or-false> );, $search->is_case_insensitive( I<true-or-false> );, $search->limit_re( I<some-regxp> );, $search->dir_prefix( I<some-string-value> );, $search->progress( I<some-progress-object> );, $name2path = $self->name2path;, $path2name = $self->path2name; =item MAIN SEARCH METHODS =over 4 =item C<< $search->survey( @directories ) >> C<name2path>, C<path2name> =item C<< $search->simplify_name( $str ) >> =item C<< $search->find( $pod ) >> =item C<< $search->find( $pod, @search_dirs ) >> =item C<< $self->contains_pod( $file ) >> =back =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::SimpleTree -- parse Pod into a simple parse tree =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =item Tree Contents =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::Subclassing -- write a formatter as a Pod::Simple subclass =over 4 =item SYNOPSIS =item DESCRIPTION Pod::Simple, Pod::Simple::Methody, Pod::Simple::PullParser, Pod::Simple::SimpleTree =item Events C<< $parser->_handle_element_start( I<element_name>, I<attr_hashref> ) >>, C<< $parser->_handle_element_end( I<element_name> ) >>, C<< $parser->_handle_text( I<text_string> ) >>, events with an element_name of Document, events with an element_name of Para, events with an element_name of B, C, F, or I, events with an element_name of S, events with an element_name of X, events with an element_name of L, events with an element_name of E or Z, events with an element_name of Verbatim, events with an element_name of head1 .. head4, events with an element_name of encoding, events with an element_name of over-bullet, events with an element_name of over-number, events with an element_name of over-text, events with an element_name of over-block, events with an element_name of over-empty, events with an element_name of item-bullet, events with an element_name of item-number, events with an element_name of item-text, events with an element_name of for, events with an element_name of Data =item More Pod::Simple Methods C<< $parser->accept_targets( I<SOMEVALUE> ) >>, C<< $parser->accept_targets_as_text( I<SOMEVALUE> ) >>, C<< $parser->accept_codes( I<Codename>, I<Codename>... ) >>, C<< $parser->accept_directive_as_data( I<directive_name> ) >>, C<< $parser->accept_directive_as_verbatim( I<directive_name> ) >>, C<< $parser->accept_directive_as_processed( I<directive_name> ) >>, C<< $parser->nbsp_for_S( I<BOOLEAN> ); >>, C<< $parser->version_report() >>, C<< $parser->pod_para_count() >>, C<< $parser->line_count() >>, C<< $parser->nix_X_codes( I<SOMEVALUE> ) >>, C<< $parser->keep_encoding_directive( I<SOMEVALUE> ) >>, C<< $parser->merge_text( I<SOMEVALUE> ) >>, C<< $parser->code_handler( I<CODE_REF> ) >>, C<< $parser->cut_handler( I<CODE_REF> ) >>, C<< $parser->pod_handler( I<CODE_REF> ) >>, C<< $parser->whiteline_handler( I<CODE_REF> ) >>, C<< $parser->whine( I<linenumber>, I<complaint string> ) >>, C<< $parser->scream( I<linenumber>, I<complaint string> ) >>, C<< $parser->source_dead(1) >>, C<< $parser->hide_line_numbers( I<SOMEVALUE> ) >>, C<< $parser->no_whining( I<SOMEVALUE> ) >>, C<< $parser->no_errata_section( I<SOMEVALUE> ) >>, C<< $parser->complain_stderr( I<SOMEVALUE> ) >>, C<< $parser->bare_output( I<SOMEVALUE> ) >>, C<< $parser->preserve_whitespace( I<SOMEVALUE> ) >>, C<< $parser->parse_empty_lists( I<SOMEVALUE> ) >> =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::Text -- format Pod as plaintext =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::TextContent -- get the text content of Pod =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::XHTML -- format Pod as validating XHTML =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Minimal code =back =back =over 4 =item METHODS =over 4 =item perldoc_url_prefix =item perldoc_url_postfix =item man_url_prefix =item man_url_postfix =item title_prefix, title_postfix =item html_css =item html_javascript =item html_doctype =item html_charset =item html_header_tags =item html_h_level =item default_title =item force_title =item html_header, html_footer =item index =item anchor_items =item backlink =back =back =over 4 =item SUBCLASSING =back =over 4 =item handle_text =item handle_code =item accept_targets_as_html =back =over 4 =item resolve_pod_page_link =back =over 4 =item resolve_man_page_link =back =over 4 =item idify =back =over 4 =item batch_mode_page_object_init =back =over 4 =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item ACKNOWLEDGEMENTS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Simple::XMLOutStream -- turn Pod into XML =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item ABOUT EXTENDING POD =item SEE ALSO =item SUPPORT =item COPYRIGHT AND DISCLAIMERS =item AUTHOR Allison Randal C<allison@perl.org>, Hans Dieter Pearcey C<hdp@cpan.org>, David E. Wheeler C<dwheeler@cpan.org> =back =head2 Pod::Text - Convert POD data to formatted text =over 4 =item SYNOPSIS =item DESCRIPTION alt, code, errors, indent, loose, margin, nourls, quotes, sentence, stderr, utf8, width =item DIAGNOSTICS Bizarre space in item, Item called without tag, Can't open %s for reading: %s, Invalid errors setting "%s", Invalid quote specification "%s", POD document had syntax errors =item BUGS =item CAVEATS =item NOTES =item AUTHOR =item COPYRIGHT AND LICENSE =item SEE ALSO =back =head2 Pod::Text::Color - Convert POD data to formatted color ASCII text =over 4 =item SYNOPSIS =item DESCRIPTION =item BUGS =item AUTHOR =item COPYRIGHT AND LICENSE =item SEE ALSO =back =head2 Pod::Text::Overstrike - Convert POD data to formatted overstrike text =over 4 =item SYNOPSIS =item DESCRIPTION =item BUGS =item AUTHOR =item COPYRIGHT AND LICENSE =item SEE ALSO =back =head2 Pod::Text::Termcap - Convert POD data to ASCII text with format escapes =over 4 =item SYNOPSIS =item DESCRIPTION =item AUTHOR =item COPYRIGHT AND LICENSE =item SEE ALSO =back =head2 Pod::Usage - print a usage message from embedded pod documentation =over 4 =item SYNOPSIS =item ARGUMENTS C<-message> I<string>, C<-msg> I<string>, C<-exitval> I<value>, C<-verbose> I<value>, C<-sections> I<spec>, C<-output> I<handle>, C<-input> I<handle>, C<-pathlist> I<string>, C<-noperldoc>, C<-perlcmd>, C<-perldoc> I<path-to-perldoc>, C<-perldocopt> I<string> =over 4 =item Formatting base class =item Pass-through options =back =item DESCRIPTION =over 4 =item Scripts =back =item EXAMPLES =over 4 =item Recommended Use =back =item CAVEATS =item AUTHOR =item ACKNOWLEDGMENTS =item SEE ALSO =back =head2 SDBM_File - Tied access to sdbm files =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Tie =back =item EXPORTS =item DIAGNOSTICS =over 4 =item C<sdbm store returned -1, errno 22, key "..." at ...> =back =item SECURITY WARNING =item BUGS AND WARNINGS =back =head2 Safe - Compile and execute code in restricted compartments =over 4 =item SYNOPSIS =item DESCRIPTION a new namespace, an operator mask =item WARNING =item METHODS =over 4 =item permit (OP, ...) =item permit_only (OP, ...) =item deny (OP, ...) =item deny_only (OP, ...) =item trap (OP, ...), untrap (OP, ...) =item share (NAME, ...) =item share_from (PACKAGE, ARRAYREF) =item varglob (VARNAME) =item reval (STRING, STRICT) =item rdo (FILENAME) =item root (NAMESPACE) =item mask (MASK) =item wrap_code_ref (CODEREF) =item wrap_code_refs_within (...) =back =item RISKS Memory, CPU, Snooping, Signals, State Changes =item AUTHOR =back =head2 Scalar::Util - A selection of general-utility scalar subroutines =over 4 =item SYNOPSIS =item DESCRIPTION =back =over 4 =item FUNCTIONS FOR REFERENCES =over 4 =item blessed =item refaddr =item reftype =item weaken =item unweaken =item isweak =back =item OTHER FUNCTIONS =over 4 =item dualvar =item isdual =item isvstring =item looks_like_number =item openhandle =item readonly =item set_prototype =item tainted =back =item DIAGNOSTICS Weak references are not implemented in the version of perl, Vstrings are not implemented in the version of perl =item KNOWN BUGS =item SEE ALSO =item COPYRIGHT =back =head2 Search::Dict - look - search for key in dictionary file =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 SelectSaver - save and restore selected file handle =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 SelfLoader - load functions only on demand =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item The __DATA__ token =item SelfLoader autoloading =item Autoloading and package lexicals =item SelfLoader and AutoLoader =item __DATA__, __END__, and the FOOBAR::DATA filehandle. =item Classes and inherited methods. =back =item Multiple packages and fully qualified subroutine names =item AUTHOR =item COPYRIGHT AND LICENSE a), b) =back =head2 Socket, C<Socket> - networking constants and support functions =over 4 =item SYNOPSIS =item DESCRIPTION =back =over 4 =item CONSTANTS =back =over 4 =item PF_INET, PF_INET6, PF_UNIX, ... =item AF_INET, AF_INET6, AF_UNIX, ... =item SOCK_STREAM, SOCK_DGRAM, SOCK_RAW, ... =item SOCK_NONBLOCK. SOCK_CLOEXEC =item SOL_SOCKET =item SO_ACCEPTCONN, SO_BROADCAST, SO_ERROR, ... =item IP_OPTIONS, IP_TOS, IP_TTL, ... =item IP_PMTUDISC_WANT, IP_PMTUDISC_DONT, ... =item IPTOS_LOWDELAY, IPTOS_THROUGHPUT, IPTOS_RELIABILITY, ... =item MSG_BCAST, MSG_OOB, MSG_TRUNC, ... =item SHUT_RD, SHUT_RDWR, SHUT_WR =item INADDR_ANY, INADDR_BROADCAST, INADDR_LOOPBACK, INADDR_NONE =item IPPROTO_IP, IPPROTO_IPV6, IPPROTO_TCP, ... =item TCP_CORK, TCP_KEEPALIVE, TCP_NODELAY, ... =item IN6ADDR_ANY, IN6ADDR_LOOPBACK =item IPV6_ADD_MEMBERSHIP, IPV6_MTU, IPV6_V6ONLY, ... =back =over 4 =item STRUCTURE MANIPULATORS =back =over 4 =item $family = sockaddr_family $sockaddr =item $sockaddr = pack_sockaddr_in $port, $ip_address =item ($port, $ip_address) = unpack_sockaddr_in $sockaddr =item $sockaddr = sockaddr_in $port, $ip_address =item ($port, $ip_address) = sockaddr_in $sockaddr =item $sockaddr = pack_sockaddr_in6 $port, $ip6_address, [$scope_id, [$flowinfo]] =item ($port, $ip6_address, $scope_id, $flowinfo) = unpack_sockaddr_in6 $sockaddr =item $sockaddr = sockaddr_in6 $port, $ip6_address, [$scope_id, [$flowinfo]] =item ($port, $ip6_address, $scope_id, $flowinfo) = sockaddr_in6 $sockaddr =item $sockaddr = pack_sockaddr_un $path =item ($path) = unpack_sockaddr_un $sockaddr =item $sockaddr = sockaddr_un $path =item ($path) = sockaddr_un $sockaddr =item $ip_mreq = pack_ip_mreq $multiaddr, $interface =item ($multiaddr, $interface) = unpack_ip_mreq $ip_mreq =item $ip_mreq_source = pack_ip_mreq_source $multiaddr, $source, $interface =item ($multiaddr, $source, $interface) = unpack_ip_mreq_source $ip_mreq =item $ipv6_mreq = pack_ipv6_mreq $multiaddr6, $ifindex =item ($multiaddr6, $ifindex) = unpack_ipv6_mreq $ipv6_mreq =back =over 4 =item FUNCTIONS =back =over 4 =item $ip_address = inet_aton $string =item $string = inet_ntoa $ip_address =item $address = inet_pton $family, $string =item $string = inet_ntop $family, $address =item ($err, @result) = getaddrinfo $host, $service, [$hints] flags => INT, family => INT, socktype => INT, protocol => INT, family => INT, socktype => INT, protocol => INT, addr => STRING, canonname => STRING, AI_PASSIVE, AI_CANONNAME, AI_NUMERICHOST =item ($err, $hostname, $servicename) = getnameinfo $sockaddr, [$flags, [$xflags]] NI_NUMERICHOST, NI_NUMERICSERV, NI_NAMEREQD, NI_DGRAM, NIx_NOHOST, NIx_NOSERV =back =over 4 =item getaddrinfo() / getnameinfo() ERROR CONSTANTS EAI_AGAIN, EAI_BADFLAGS, EAI_FAMILY, EAI_NODATA, EAI_NONAME, EAI_SERVICE =back =over 4 =item EXAMPLES =over 4 =item Lookup for connect() =item Making a human-readable string out of an address =item Resolving hostnames into IP addresses =item Accessing socket options =back =back =over 4 =item AUTHOR =back =head2 Storable - persistence for Perl data structures =over 4 =item SYNOPSIS =item DESCRIPTION =item MEMORY STORE =item ADVISORY LOCKING =item SPEED =item CANONICAL REPRESENTATION =item CODE REFERENCES =item FORWARD COMPATIBILITY utf8 data, restricted hashes, huge objects, files from future versions of Storable =item ERROR REPORTING =item WIZARDS ONLY =over 4 =item Hooks C<STORABLE_freeze> I<obj>, I<cloning>, C<STORABLE_thaw> I<obj>, I<cloning>, I<serialized>, .., C<STORABLE_attach> I<class>, I<cloning>, I<serialized> =item Predicates C<Storable::last_op_in_netorder>, C<Storable::is_storing>, C<Storable::is_retrieving> =item Recursion =item Deep Cloning =back =item Storable magic $info = Storable::file_magic( $filename ), C<version>, C<version_nv>, C<major>, C<minor>, C<hdrsize>, C<netorder>, C<byteorder>, C<intsize>, C<longsize>, C<ptrsize>, C<nvsize>, C<file>, $info = Storable::read_magic( $buffer ), $info = Storable::read_magic( $buffer, $must_be_file ) =item EXAMPLES =item SECURITY WARNING =item WARNING =item REGULAR EXPRESSIONS =item BUGS =over 4 =item 64 bit data in perl 5.6.0 and 5.6.1 =back =item CREDITS =item AUTHOR =item SEE ALSO =back =head2 Sub::Util - A selection of utility subroutines for subs and CODE references =over 4 =item SYNOPSIS =item DESCRIPTION =back =over 4 =item FUNCTIONS =back =over 4 =item prototype =back =over 4 =item set_prototype =back =over 4 =item subname =back =over 4 =item set_subname =back =over 4 =item AUTHOR =back =head2 Symbol - manipulate Perl symbols and their names =over 4 =item SYNOPSIS =item DESCRIPTION =item BUGS =back =head2 Sys::Hostname - Try every conceivable way to get hostname =over 4 =item SYNOPSIS =item DESCRIPTION =item AUTHOR =back =head2 Sys::Syslog - Perl interface to the UNIX syslog(3) calls =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item EXPORTS =item FUNCTIONS B<openlog($ident, $logopt, $facility)>, B<syslog($priority, $message)>, B<syslog($priority, $format, @args)>, B<Note>, B<setlogmask($mask_priority)>, B<setlogsock()>, B<Note>, B<closelog()> =item THE RULES OF SYS::SYSLOG =item EXAMPLES =item CONSTANTS =over 4 =item Facilities =item Levels =back =item DIAGNOSTICS C<Invalid argument passed to setlogsock>, C<eventlog passed to setlogsock, but no Win32 API available>, C<no connection to syslog available>, C<stream passed to setlogsock, but %s is not writable>, C<stream passed to setlogsock, but could not find any device>, C<tcp passed to setlogsock, but tcp service unavailable>, C<syslog: expecting argument %s>, C<syslog: invalid level/facility: %s>, C<syslog: too many levels given: %s>, C<syslog: too many facilities given: %s>, C<syslog: level must be given>, C<udp passed to setlogsock, but udp service unavailable>, C<unix passed to setlogsock, but path not available> =item HISTORY =item SEE ALSO =over 4 =item Other modules =item Manual Pages =item RFCs =item Articles =item Event Log =back =item AUTHORS & ACKNOWLEDGEMENTS =item BUGS =item SUPPORT Perl Documentation, MetaCPAN, Search CPAN, AnnoCPAN: Annotated CPAN documentation, CPAN Ratings, RT: CPAN's request tracker =item COPYRIGHT =item LICENSE =back =head2 TAP::Base - Base class that provides common functionality to L<TAP::Parser> and L<TAP::Harness> =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =back =back =head2 TAP::Formatter::Base - Base class for harness output delegates =over 4 =item VERSION =back =over 4 =item DESCRIPTION =item SYNOPSIS =back =over 4 =item METHODS =over 4 =item Class Methods C<verbosity>, C<verbose>, C<timer>, C<failures>, C<comments>, C<quiet>, C<really_quiet>, C<silent>, C<errors>, C<directives>, C<stdout>, C<color>, C<jobs>, C<show_count> =back =back =head2 TAP::Formatter::Color - Run Perl test scripts with color =over 4 =item VERSION =back =over 4 =item DESCRIPTION =item SYNOPSIS =item METHODS =over 4 =item Class Methods =back =back =head2 TAP::Formatter::Console - Harness output delegate for default console output =over 4 =item VERSION =back =over 4 =item DESCRIPTION =item SYNOPSIS =over 4 =item C<< open_test >> =back =back =head2 TAP::Formatter::Console::ParallelSession - Harness output delegate for parallel console output =over 4 =item VERSION =back =over 4 =item DESCRIPTION =item SYNOPSIS =back =over 4 =item METHODS =over 4 =item Class Methods =back =back =head2 TAP::Formatter::Console::Session - Harness output delegate for default console output =over 4 =item VERSION =back =over 4 =item DESCRIPTION =back =over 4 =item C<< clear_for_close >> =item C<< close_test >> =item C<< header >> =item C<< result >> =back =head2 TAP::Formatter::File - Harness output delegate for file output =over 4 =item VERSION =back =over 4 =item DESCRIPTION =item SYNOPSIS =over 4 =item C<< open_test >> =back =back =head2 TAP::Formatter::File::Session - Harness output delegate for file output =over 4 =item VERSION =back =over 4 =item DESCRIPTION =back =over 4 =item METHODS =over 4 =item result =back =back =over 4 =item close_test =back =head2 TAP::Formatter::Session - Abstract base class for harness output delegate =over 4 =item VERSION =back =over 4 =item METHODS =over 4 =item Class Methods C<formatter>, C<parser>, C<name>, C<show_count> =back =back =head2 TAP::Harness - Run test scripts with statistics =over 4 =item VERSION =back =over 4 =item DESCRIPTION =item SYNOPSIS =back =over 4 =item METHODS =over 4 =item Class Methods C<verbosity>, C<timer>, C<failures>, C<comments>, C<show_count>, C<normalize>, C<lib>, C<switches>, C<test_args>, C<color>, C<exec>, C<merge>, C<sources>, C<aggregator_class>, C<version>, C<formatter_class>, C<multiplexer_class>, C<parser_class>, C<scheduler_class>, C<formatter>, C<errors>, C<directives>, C<ignore_exit>, C<jobs>, C<rules>, C<rulesfiles>, C<stdout>, C<trap> =back =back =over 4 =item Instance Methods =back the source name of a test to run, a reference to a [ source name, display name ] array =over 4 =item CONFIGURING =over 4 =item Plugins =item C<Module::Build> =item C<ExtUtils::MakeMaker> =item C<prove> =back =item WRITING PLUGINS Customize how TAP gets into the parser, Customize how TAP results are output from the parser =item SUBCLASSING =over 4 =item Methods L</new>, L</runtests>, L</summary> =back =back =over 4 =item REPLACING =item SEE ALSO =back =head2 TAP::Harness::Beyond, Test::Harness::Beyond - Beyond make test =over 4 =item Beyond make test =over 4 =item Saved State =item Parallel Testing =item Non-Perl Tests =item Mixing it up =item Rolling My Own =item Deeper Customisation =item Callbacks =item Parsing TAP =item Getting Support =back =back =head2 TAP::Harness::Env - Parsing harness related environmental variables where appropriate =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item METHODS create( \%args ) =item ENVIRONMENTAL VARIABLES C<HARNESS_PERL_SWITCHES>, C<HARNESS_VERBOSE>, C<HARNESS_SUBCLASS>, C<HARNESS_OPTIONS>, C<< j<n> >>, C<< c >>, C<< a<file.tgz> >>, C<< fPackage-With-Dashes >>, C<HARNESS_TIMER>, C<HARNESS_COLOR>, C<HARNESS_IGNORE_EXIT> =back =head2 TAP::Object - Base class that provides common functionality to all C<TAP::*> modules =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =back =back =over 4 =item Instance Methods =back =head2 TAP::Parser - Parse L<TAP|Test::Harness::TAP> output =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods C<source>, C<tap>, C<exec>, C<sources>, C<callback>, C<switches>, C<test_args>, C<spool>, C<merge>, C<grammar_class>, C<result_factory_class>, C<iterator_factory_class> =back =back =over 4 =item Instance Methods =back =over 4 =item INDIVIDUAL RESULTS =over 4 =item Result types Version, Plan, Pragma, Test, Comment, Bailout, Unknown =item Common type methods =item C<plan> methods =item C<pragma> methods =item C<comment> methods =item C<bailout> methods =item C<unknown> methods =item C<test> methods =back =item TOTAL RESULTS =over 4 =item Individual Results =back =back =over 4 =item Pragmas =back =over 4 =item Summary Results =back =over 4 =item C<ignore_exit> =back Misplaced plan, No plan, More than one plan, Test numbers out of sequence =over 4 =item CALLBACKS C<test>, C<version>, C<plan>, C<comment>, C<bailout>, C<yaml>, C<unknown>, C<ELSE>, C<ALL>, C<EOF> =item TAP GRAMMAR =item BACKWARDS COMPATIBILITY =over 4 =item Differences TODO plans, 'Missing' tests =back =item SUBCLASSING =over 4 =item Parser Components option 1, option 2 =back =item ACKNOWLEDGMENTS Michael Schwern, Andy Lester, chromatic, GEOFFR, Shlomi Fish, Torsten Schoenfeld, Jerry Gay, Aristotle, Adam Kennedy, Yves Orton, Adrian Howard, Sean & Lil, Andreas J. Koenig, Florian Ragwitz, Corion, Mark Stosberg, Matt Kraai, David Wheeler, Alex Vandiver, Cosimo Streppone, Ville Skyttä =item AUTHORS =item BUGS =item COPYRIGHT & LICENSE =back =head2 TAP::Parser::Aggregator - Aggregate TAP::Parser results =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =back =back =over 4 =item Instance Methods =back =over 4 =item Summary methods failed, parse_errors, passed, planned, skipped, todo, todo_passed, wait, exit =back Failed tests, Parse errors, Bad exit or wait status =over 4 =item See Also =back =head2 TAP::Parser::Grammar - A grammar for the Test Anything Protocol. =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =back =back =over 4 =item Instance Methods =back =over 4 =item TAP GRAMMAR =item SUBCLASSING =item SEE ALSO =back =head2 TAP::Parser::Iterator - Base class for TAP source iterators =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =item Instance Methods =back =back =over 4 =item SUBCLASSING =over 4 =item Example =back =item SEE ALSO =back =head2 TAP::Parser::Iterator::Array - Iterator for array-based TAP sources =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =item Instance Methods =back =back =over 4 =item ATTRIBUTION =item SEE ALSO =back =head2 TAP::Parser::Iterator::Process - Iterator for process-based TAP sources =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =item Instance Methods =back =back =over 4 =item ATTRIBUTION =item SEE ALSO =back =head2 TAP::Parser::Iterator::Stream - Iterator for filehandle-based TAP sources =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =back =back =over 4 =item Instance Methods =back =over 4 =item ATTRIBUTION =item SEE ALSO =back =head2 TAP::Parser::IteratorFactory - Figures out which SourceHandler objects to use for a given Source =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =back =back =over 4 =item Instance Methods =back =over 4 =item SUBCLASSING =over 4 =item Example =back =item AUTHORS =item ATTRIBUTION =item SEE ALSO =back =head2 TAP::Parser::Multiplexer - Multiplex multiple TAP::Parsers =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =back =back =over 4 =item Instance Methods =back =over 4 =item See Also =back =head2 TAP::Parser::Result - Base class for TAP::Parser output objects =over 4 =item VERSION =back =over 4 =item SYNOPSIS =over 4 =item DESCRIPTION =item METHODS =back =back =over 4 =item Boolean methods C<is_plan>, C<is_pragma>, C<is_test>, C<is_comment>, C<is_bailout>, C<is_version>, C<is_unknown>, C<is_yaml> =back =over 4 =item SUBCLASSING =over 4 =item Example =back =item SEE ALSO =back =head2 TAP::Parser::Result::Bailout - Bailout result token. =over 4 =item VERSION =back =over 4 =item DESCRIPTION =item OVERRIDDEN METHODS C<as_string> =back =over 4 =item Instance Methods =back =head2 TAP::Parser::Result::Comment - Comment result token. =over 4 =item VERSION =back =over 4 =item DESCRIPTION =item OVERRIDDEN METHODS C<as_string> =back =over 4 =item Instance Methods =back =head2 TAP::Parser::Result::Plan - Plan result token. =over 4 =item VERSION =back =over 4 =item DESCRIPTION =item OVERRIDDEN METHODS C<as_string>, C<raw> =back =over 4 =item Instance Methods =back =head2 TAP::Parser::Result::Pragma - TAP pragma token. =over 4 =item VERSION =back =over 4 =item DESCRIPTION =item OVERRIDDEN METHODS C<as_string>, C<raw> =back =over 4 =item Instance Methods =back =head2 TAP::Parser::Result::Test - Test result token. =over 4 =item VERSION =back =over 4 =item DESCRIPTION =item OVERRIDDEN METHODS =over 4 =item Instance Methods =back =back =head2 TAP::Parser::Result::Unknown - Unknown result token. =over 4 =item VERSION =back =over 4 =item DESCRIPTION =item OVERRIDDEN METHODS C<as_string>, C<raw> =back =head2 TAP::Parser::Result::Version - TAP syntax version token. =over 4 =item VERSION =back =over 4 =item DESCRIPTION =item OVERRIDDEN METHODS C<as_string>, C<raw> =back =over 4 =item Instance Methods =back =head2 TAP::Parser::Result::YAML - YAML result token. =over 4 =item VERSION =back =over 4 =item DESCRIPTION =item OVERRIDDEN METHODS C<as_string>, C<raw> =back =over 4 =item Instance Methods =back =head2 TAP::Parser::ResultFactory - Factory for creating TAP::Parser output objects =over 4 =item SYNOPSIS =item VERSION =back =over 4 =item DESCRIPTION =item METHODS =item Class Methods =back =over 4 =item SUBCLASSING =over 4 =item Example =back =item SEE ALSO =back =head2 TAP::Parser::Scheduler - Schedule tests during parallel testing =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =item Rules data structure By default, all tests are eligible to be run in parallel. Specifying any of your own rules removes this one, "First match wins". The first rule that matches a test will be the one that applies, Any test which does not match a rule will be run in sequence at the end of the run, The existence of a rule does not imply selecting a test. You must still specify the tests to run, Specifying a rule to allow tests to run in parallel does not make the run in parallel. You still need specify the number of parallel C<jobs> in your Harness object =back =back =over 4 =item Instance Methods =back =head2 TAP::Parser::Scheduler::Job - A single testing job. =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =back =back =over 4 =item Instance Methods =back =over 4 =item Attributes =back =head2 TAP::Parser::Scheduler::Spinner - A no-op job. =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =back =back =over 4 =item Instance Methods =back =over 4 =item SEE ALSO =back =head2 TAP::Parser::Source - a TAP source & meta data about it =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =back =back =over 4 =item Instance Methods =back =over 4 =item AUTHORS =item SEE ALSO =back =head2 TAP::Parser::SourceHandler - Base class for different TAP source handlers =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =back =back =over 4 =item SUBCLASSING =over 4 =item Example =back =item AUTHORS =item SEE ALSO =back =head2 TAP::Parser::SourceHandler::Executable - Stream output from an executable TAP source =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =back =back =over 4 =item SUBCLASSING =over 4 =item Example =back =item SEE ALSO =back =head2 TAP::Parser::SourceHandler::File - Stream TAP from a text file. =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =back =back =over 4 =item CONFIGURATION =item SUBCLASSING =item SEE ALSO =back =head2 TAP::Parser::SourceHandler::Handle - Stream TAP from an IO::Handle or a GLOB. =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =back =back =over 4 =item SUBCLASSING =item SEE ALSO =back =head2 TAP::Parser::SourceHandler::Perl - Stream TAP from a Perl executable =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =back =back =over 4 =item SUBCLASSING =over 4 =item Example =back =item SEE ALSO =back =head2 TAP::Parser::SourceHandler::RawTAP - Stream output from raw TAP in a scalar/array ref. =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =back =back =over 4 =item SUBCLASSING =item SEE ALSO =back =head2 TAP::Parser::YAMLish::Reader - Read YAMLish data from iterator =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =item Instance Methods =back =item AUTHOR =item SEE ALSO =item COPYRIGHT =back =head2 TAP::Parser::YAMLish::Writer - Write YAMLish data =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item METHODS =over 4 =item Class Methods =item Instance Methods a reference to a scalar to append YAML to, the handle of an open file, a reference to an array into which YAML will be pushed, a code reference =back =item AUTHOR =item SEE ALSO =item COPYRIGHT =back =head2 Term::ANSIColor - Color screen output using ANSI escape sequences =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Supported Colors =item Function Interface color(ATTR[, ATTR ...]), colored(STRING, ATTR[, ATTR ...]), colored(ATTR-REF, STRING[, STRING...]), uncolor(ESCAPE), colorstrip(STRING[, STRING ...]), colorvalid(ATTR[, ATTR ...]), coloralias(ALIAS[, ATTR ...]) =item Constant Interface =item The Color Stack =item Supporting CLICOLOR =back =item DIAGNOSTICS Bad color mapping %s, Bad escape sequence %s, Bareword "%s" not allowed while "strict subs" in use, Cannot alias standard color %s, Cannot alias standard color %s in %s, Invalid alias name %s, Invalid alias name %s in %s, Invalid attribute name %s, Invalid attribute name %s in %s, Name "%s" used only once: possible typo, No comma allowed after filehandle, No name for escape sequence %s =item ENVIRONMENT ANSI_COLORS_ALIASES, ANSI_COLORS_DISABLED, NO_COLOR =item COMPATIBILITY =item RESTRICTIONS =item NOTES =item AUTHORS =item COPYRIGHT AND LICENSE =item SEE ALSO =back =head2 Term::Cap - Perl termcap interface =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item METHODS =back =back B<Tgetent>, OSPEED, TERM B<Tpad>, B<$string>, B<$cnt>, B<$FH> B<Tputs>, B<$cap>, B<$cnt>, B<$FH> B<Tgoto>, B<$cap>, B<$col>, B<$row>, B<$FH> B<Trequire> =over 4 =item EXAMPLES =item COPYRIGHT AND LICENSE =item AUTHOR =item SEE ALSO =back =head2 Term::Complete - Perl word completion module =over 4 =item SYNOPSIS =item DESCRIPTION E<lt>tabE<gt>, ^D, ^U, E<lt>delE<gt>, E<lt>bsE<gt> =item DIAGNOSTICS =item BUGS =item AUTHOR =back =head2 Term::ReadLine - Perl interface to various C<readline> packages. If no real package is found, substitutes stubs instead of basic functions. =over 4 =item SYNOPSIS =item DESCRIPTION =item Minimal set of supported functions C<ReadLine>, C<new>, C<readline>, C<addhistory>, C<IN>, C<OUT>, C<MinLine>, C<findConsole>, Attribs, C<Features> =item Additional supported functions C<tkRunning>, C<event_loop>, C<ornaments>, C<newTTY> =item EXPORTS =item ENVIRONMENT =back =head2 Test - provides a simple framework for writing test scripts =over 4 =item SYNOPSIS =item DESCRIPTION =item QUICK START GUIDE =over 4 =item Functions C<plan(...)>, C<tests =E<gt> I<number>>, C<todo =E<gt> [I<1,5,14>]>, C<onfail =E<gt> sub { ... }>, C<onfail =E<gt> \&some_sub> =back =back B<_to_value> C<ok(...)> C<skip(I<skip_if_true>, I<args...>)> =over 4 =item TEST TYPES NORMAL TESTS, SKIPPED TESTS, TODO TESTS =item ONFAIL =item BUGS and CAVEATS =item ENVIRONMENT =item NOTE =item SEE ALSO =item AUTHOR =back =head2 Test2 - Framework for writing test tools that all work together. =over 4 =item DESCRIPTION =over 4 =item WHAT IS NEW? Easier to test new testing tools, Better diagnostics capabilities, Event driven, More complete API, Support for output other than TAP, Subtest implementation is more sane, Support for threading/forking =back =item GETTING STARTED =back =head2 Test2, This describes the namespace layout for the Test2 ecosystem. Not all the namespaces listed here are part of the Test2 distribution, some are implemented in L<Test2::Suite>. =over 4 =item Test2::Tools:: =item Test2::Plugin:: =item Test2::Bundle:: =item Test2::Require:: =item Test2::Formatter:: =item Test2::Event:: =item Test2::Hub:: =item Test2::IPC:: =item Test2::Util:: =item Test2::API:: =item Test2:: =back =over 4 =item SEE ALSO =item CONTACTING US =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::API - Primary interface for writing Test2 based testing tools. =over 4 =item ***INTERNALS NOTE*** =item DESCRIPTION =item SYNOPSIS =over 4 =item WRITING A TOOL =item TESTING YOUR TOOLS The event from C<ok(1, "pass")>, The plan event for the subtest, The subtest event itself, with the first 2 events nested inside it as children =item OTHER API FUNCTIONS =back =item MAIN API EXPORTS =over 4 =item context(...) $ctx = context(), $ctx = context(%params), level => $int, wrapped => $int, stack => $stack, hub => $hub, on_init => sub { ... }, on_release => sub { ... } =item release($;$) release $ctx;, release $ctx, ...; =item context_do(&;@) =item no_context(&;$) no_context { ... };, no_context { ... } $hid; =item intercept(&) =item run_subtest(...) $NAME, \&CODE, $BUFFERED or \%PARAMS, 'buffered' => $bool, 'inherit_trace' => $bool, 'no_fork' => $bool, @ARGS, Things not effected by this flag, Things that are effected by this flag, Things that are formatter dependant =back =item OTHER API EXPORTS =over 4 =item STATUS AND INITIALIZATION STATE $bool = test2_init_done(), $bool = test2_load_done(), test2_set_is_end(), test2_set_is_end($bool), $bool = test2_get_is_end(), $stack = test2_stack(), $bool = test2_is_testing_done(), test2_ipc_disable, $bool = test2_ipc_diabled, test2_ipc_wait_enable(), test2_ipc_wait_disable(), $bool = test2_ipc_wait_enabled(), $bool = test2_no_wait(), test2_no_wait($bool), $fh = test2_stdout(), $fh = test2_stderr(), test2_reset_io() =item BEHAVIOR HOOKS test2_add_callback_exit(sub { ... }), test2_add_callback_post_load(sub { ... }), test2_add_callback_testing_done(sub { ... }), test2_add_callback_context_acquire(sub { ... }), test2_add_callback_context_init(sub { ... }), test2_add_callback_context_release(sub { ... }), test2_add_callback_pre_subtest(sub { ... }), @list = test2_list_context_acquire_callbacks(), @list = test2_list_context_init_callbacks(), @list = test2_list_context_release_callbacks(), @list = test2_list_exit_callbacks(), @list = test2_list_post_load_callbacks(), @list = test2_list_pre_subtest_callbacks(), test2_add_uuid_via(sub { ... }), $sub = test2_add_uuid_via() =item IPC AND CONCURRENCY $bool = test2_has_ipc(), $ipc = test2_ipc(), test2_ipc_add_driver($DRIVER), @drivers = test2_ipc_drivers(), $bool = test2_ipc_polling(), test2_ipc_enable_polling(), test2_ipc_disable_polling(), test2_ipc_enable_shm(), test2_ipc_set_pending($uniq_val), $pending = test2_ipc_get_pending(), $timeout = test2_ipc_get_timeout(), test2_ipc_set_timeout($timeout) =item MANAGING FORMATTERS $formatter = test2_formatter, test2_formatter_set($class_or_instance), @formatters = test2_formatters(), test2_formatter_add($class_or_instance) =back =item OTHER EXAMPLES =item SEE ALSO =item MAGIC =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::API::Breakage - What breaks at what version =over 4 =item DESCRIPTION =item FUNCTIONS %mod_ver = upgrade_suggested(), %mod_ver = Test2::API::Breakage->upgrade_suggested(), %mod_ver = upgrade_required(), %mod_ver = Test2::API::Breakage->upgrade_required(), %mod_ver = known_broken(), %mod_ver = Test2::API::Breakage->known_broken() =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::API::Context - Object to represent a testing context. =over 4 =item DESCRIPTION =item SYNOPSIS =item CRITICAL DETAILS you MUST always use the context() sub from Test2::API, You MUST always release the context when done with it, You MUST NOT pass context objects around, You MUST NOT store or cache a context for later, You SHOULD obtain your context as soon as possible in a given tool =item METHODS $ctx->done_testing;, $clone = $ctx->snapshot(), $ctx->release(), $ctx->throw($message), $ctx->alert($message), $stack = $ctx->stack(), $hub = $ctx->hub(), $dbg = $ctx->trace(), $ctx->do_in_context(\&code, @args);, $ctx->restore_error_vars(), $! = $ctx->errno(), $? = $ctx->child_error(), $@ = $ctx->eval_error() =over 4 =item EVENT PRODUCTION METHODS $event = $ctx->pass(), $event = $ctx->pass($name), $true = $ctx->pass_and_release(), $true = $ctx->pass_and_release($name), my $event = $ctx->fail(), my $event = $ctx->fail($name), my $event = $ctx->fail($name, @diagnostics), my $false = $ctx->fail_and_release(), my $false = $ctx->fail_and_release($name), my $false = $ctx->fail_and_release($name, @diagnostics), $event = $ctx->ok($bool, $name), $event = $ctx->ok($bool, $name, \@on_fail), $event = $ctx->note($message), $event = $ctx->diag($message), $event = $ctx->plan($max), $event = $ctx->plan(0, 'SKIP', $reason), $event = $ctx->skip($name, $reason);, $event = $ctx->bail($reason), $event = $ctx->send_ev2(%facets), $event = $ctx->build_e2(%facets), $event = $ctx->send_ev2_and_release($Type, %parameters), $event = $ctx->send_event($Type, %parameters), $event = $ctx->build_event($Type, %parameters), $event = $ctx->send_event_and_release($Type, %parameters) =back =item HOOKS =over 4 =item INIT HOOKS =item RELEASE HOOKS =back =item THIRD PARTY META-DATA =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt>, Kent Fredric E<lt>kentnl@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::API::Instance - Object used by Test2::API under the hood =over 4 =item DESCRIPTION =item SYNOPSIS $pid = $obj->pid, $obj->tid, $obj->reset(), $obj->load(), $bool = $obj->loaded, $arrayref = $obj->post_load_callbacks, $obj->add_post_load_callback(sub { ... }), $hashref = $obj->contexts(), $arrayref = $obj->context_acquire_callbacks, $arrayref = $obj->context_init_callbacks, $arrayref = $obj->context_release_callbacks, $arrayref = $obj->pre_subtest_callbacks, $obj->add_context_init_callback(sub { ... }), $obj->add_context_release_callback(sub { ... }), $obj->add_pre_subtest_callback(sub { ... }), $obj->set_exit(), $obj->set_ipc_pending($val), $pending = $obj->get_ipc_pending(), $timeout = $obj->ipc_timeout;, $obj->set_ipc_timeout($timeout);, $drivers = $obj->ipc_drivers, $obj->add_ipc_driver($DRIVER_CLASS), $bool = $obj->ipc_polling, $obj->enable_ipc_polling, $obj->disable_ipc_polling, $bool = $obj->no_wait, $bool = $obj->set_no_wait($bool), $arrayref = $obj->exit_callbacks, $obj->add_exit_callback(sub { ... }), $bool = $obj->finalized, $ipc = $obj->ipc, $obj->ipc_disable, $bool = $obj->ipc_disabled, $stack = $obj->stack, $formatter = $obj->formatter, $bool = $obj->formatter_set(), $obj->add_formatter($class), $obj->add_formatter($obj), $obj->set_add_uuid_via(sub { ... }), $sub = $obj->add_uuid_via() =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::API::Stack - Object to manage a stack of L<Test2::Hub> instances. =over 4 =item ***INTERNALS NOTE*** =item DESCRIPTION =item SYNOPSIS =item METHODS $stack = Test2::API::Stack->new(), $hub = $stack->new_hub(), $hub = $stack->new_hub(%params), $hub = $stack->new_hub(%params, class => $class), $hub = $stack->top(), $hub = $stack->peek(), $stack->cull, @hubs = $stack->all, $stack->clear, $stack->push($hub), $stack->pop($hub) =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Event - Base class for events =over 4 =item DESCRIPTION =item SYNOPSIS =item METHODS =over 4 =item GENERAL $trace = $e->trace, $bool_or_undef = $e->related($e2), $e->add_amnesty({tag => $TAG, details => $DETAILS});, $uuid = $e->uuid, $class = $e->load_facet($name), @classes = $e->FACET_TYPES(), @classes = Test2::Event->FACET_TYPES() =item NEW API $hashref = $e->common_facet_data();, $hashref = $e->facet_data(), $hashref = $e->facets(), @errors = $e->validate_facet_data();, @errors = $e->validate_facet_data(%params);, @errors = $e->validate_facet_data(\%facets, %params);, @errors = Test2::Event->validate_facet_data(%params);, @errors = Test2::Event->validate_facet_data(\%facets, %params);, require_facet_class => $BOOL, about => {...}, assert => {...}, control => {...}, meta => {...}, parent => {...}, plan => {...}, trace => {...}, amnesty => [{...}, ...], errors => [{...}, ...], info => [{...}, ...] =item LEGACY API $bool = $e->causes_fail, $bool = $e->increments_count, $e->callback($hub), $num = $e->nested, $bool = $e->global, $code = $e->terminate, $msg = $e->summary, ($count, $directive, $reason) = $e->sets_plan(), $bool = $e->diagnostics, $bool = $e->no_display, $id = $e->in_subtest, $id = $e->subtest_id =back =item THIRD PARTY META-DATA =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Event::Bail - Bailout! =over 4 =item DESCRIPTION =item SYNOPSIS =item METHODS $reason = $e->reason =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Event::Diag - Diag event type =over 4 =item DESCRIPTION =item SYNOPSIS =item ACCESSORS $diag->message =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Event::Encoding - Set the encoding for the output stream =over 4 =item DESCRIPTION =item SYNOPSIS =item METHODS $encoding = $e->encoding =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Event::Exception - Exception event =over 4 =item DESCRIPTION =item SYNOPSIS =item METHODS $reason = $e->error =item CAVEATS =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Event::Fail - Event for a simple failed assertion =over 4 =item DESCRIPTION =item SYNOPSIS =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Event::Generic - Generic event type. =over 4 =item DESCRIPTION =item SYNOPSIS =item METHODS $e->facet_data($data), $data = $e->facet_data, $e->callback($hub), $e->set_callback(sub { ... }), $bool = $e->causes_fail, $e->set_causes_fail($bool), $bool = $e->diagnostics, $e->set_diagnostics($bool), $bool_or_undef = $e->global, @bool_or_empty = $e->global, $e->set_global($bool_or_undef), $bool = $e->increments_count, $e->set_increments_count($bool), $bool = $e->no_display, $e->set_no_display($bool), @plan = $e->sets_plan, $e->set_sets_plan(\@plan), $summary = $e->summary, $e->set_summary($summary_or_undef), $int_or_undef = $e->terminate, @int_or_empty = $e->terminate, $e->set_terminate($int_or_undef) =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Event::Note - Note event type =over 4 =item DESCRIPTION =item SYNOPSIS =item ACCESSORS $note->message =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Event::Ok - Ok event type =over 4 =item DESCRIPTION =item SYNOPSIS =item ACCESSORS $rb = $e->pass, $name = $e->name, $b = $e->effective_pass =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Event::Pass - Event for a simple passing assertion =over 4 =item DESCRIPTION =item SYNOPSIS =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Event::Plan - The event of a plan =over 4 =item DESCRIPTION =item SYNOPSIS =item ACCESSORS $num = $plan->max, $dir = $plan->directive, $reason = $plan->reason =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Event::Skip - Skip event type =over 4 =item DESCRIPTION =item SYNOPSIS =item ACCESSORS $reason = $e->reason =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Event::Subtest - Event for subtest types =over 4 =item DESCRIPTION =item ACCESSORS $arrayref = $e->subevents, $bool = $e->buffered =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Event::TAP::Version - Event for TAP version. =over 4 =item DESCRIPTION =item SYNOPSIS =item METHODS $version = $e->version =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Event::V2 - Second generation event. =over 4 =item DESCRIPTION =item SYNOPSIS =over 4 =item USING A CONTEXT =item USING THE CONSTRUCTOR =back =item METHODS $fd = $e->facet_data(), $about = $e->about(), $trace = $e->trace() =over 4 =item MUTATION $e->add_amnesty({...}), $e->add_hub({...}), $e->set_uuid($UUID), $e->set_trace($trace) =item LEGACY SUPPORT METHODS causes_fail, diagnostics, global, increments_count, no_display, sets_plan, subtest_id, summary, terminate =back =item THIRD PARTY META-DATA =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Event::Waiting - Tell all procs/threads it is time to be done =over 4 =item DESCRIPTION =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::EventFacet - Base class for all event facets. =over 4 =item DESCRIPTION =item METHODS $key = $facet_class->facet_key(), $bool = $facet_class->is_list(), $clone = $facet->clone(), $clone = $facet->clone(%replace) =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::EventFacet::About - Facet with event details. =over 4 =item DESCRIPTION =item FIELDS $string = $about->{details}, $string = $about->details(), $package = $about->{package}, $package = $about->package(), $bool = $about->{no_display}, $bool = $about->no_display(), $uuid = $about->{uuid}, $uuid = $about->uuid(), $uuid = $about->{eid}, $uuid = $about->eid() =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::EventFacet::Amnesty - Facet for assertion amnesty. =over 4 =item DESCRIPTION =item NOTES =item FIELDS $string = $amnesty->{details}, $string = $amnesty->details(), $short_string = $amnesty->{tag}, $short_string = $amnesty->tag(), $bool = $amnesty->{inherited}, $bool = $amnesty->inherited() =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::EventFacet::Assert - Facet representing an assertion. =over 4 =item DESCRIPTION =item FIELDS $string = $assert->{details}, $string = $assert->details(), $bool = $assert->{pass}, $bool = $assert->pass(), $bool = $assert->{no_debug}, $bool = $assert->no_debug(), $int = $assert->{number}, $int = $assert->number() =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::EventFacet::Control - Facet for hub actions and behaviors. =over 4 =item DESCRIPTION =item FIELDS $string = $control->{details}, $string = $control->details(), $bool = $control->{global}, $bool = $control->global(), $exit = $control->{terminate}, $exit = $control->terminate(), $bool = $control->{halt}, $bool = $control->halt(), $bool = $control->{has_callback}, $bool = $control->has_callback(), $encoding = $control->{encoding}, $encoding = $control->encoding(), $phase = $control->{phase}, $phase = $control->phase() =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::EventFacet::Error - Facet for errors that need to be shown. =over 4 =item DESCRIPTION =item NOTES =item FIELDS $string = $error->{details}, $string = $error->details(), $short_string = $error->{tag}, $short_string = $error->tag(), $bool = $error->{fail}, $bool = $error->fail() =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::EventFacet::Hub - Facet for the hubs an event passes through. =over 4 =item DESCRIPTION =item FACET FIELDS $string = $trace->{details}, $string = $trace->details(), $int = $trace->{pid}, $int = $trace->pid(), $int = $trace->{tid}, $int = $trace->tid(), $hid = $trace->{hid}, $hid = $trace->hid(), $huuid = $trace->{huuid}, $huuid = $trace->huuid(), $int = $trace->{nested}, $int = $trace->nested(), $bool = $trace->{buffered}, $bool = $trace->buffered() =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::EventFacet::Info - Facet for information a developer might care about. =over 4 =item DESCRIPTION =item NOTES =item FIELDS $string_or_structure = $info->{details}, $string_or_structure = $info->details(), $structure = $info->{table}, $structure = $info->table(), $short_string = $info->{tag}, $short_string = $info->tag(), $bool = $info->{debug}, $bool = $info->debug(), $bool = $info->{important}, $bool = $info->important =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::EventFacet::Info::Table - Intermediary representation of a table. =over 4 =item DESCRIPTION =item SYNOPSIS =item ATTRIBUTES $header_aref = $t->header(), $rows_aref = $t->rows(), $bool = $t->collapse(), $aref = $t->no_collapse(), $str = $t->as_string(), $href = $t->as_hash(), %args = $t->info_args() =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::EventFacet::Meta - Facet for meta-data =over 4 =item DESCRIPTION =item METHODS AND FIELDS $anything = $meta->{anything}, $anything = $meta->anything() =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::EventFacet::Parent - Facet for events contains other events =over 4 =item DESCRIPTION =item FIELDS $string = $parent->{details}, $string = $parent->details(), $hid = $parent->{hid}, $hid = $parent->hid(), $arrayref = $parent->{children}, $arrayref = $parent->children(), $bool = $parent->{buffered}, $bool = $parent->buffered() =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::EventFacet::Plan - Facet for setting the plan =over 4 =item DESCRIPTION =item FIELDS $string = $plan->{details}, $string = $plan->details(), $positive_int = $plan->{count}, $positive_int = $plan->count(), $bool = $plan->{skip}, $bool = $plan->skip(), $bool = $plan->{none}, $bool = $plan->none() =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::EventFacet::Render - Facet that dictates how to render an event. =over 4 =item DESCRIPTION =item FIELDS $string = $render->[#]->{details}, $string = $render->[#]->details(), $string = $render->[#]->{tag}, $string = $render->[#]->tag(), $string = $render->[#]->{facet}, $string = $render->[#]->facet(), $mode = $render->[#]->{mode}, $mode = $render->[#]->mode(), calculated, replace =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::EventFacet::Trace - Debug information for events =over 4 =item DESCRIPTION =item SYNOPSIS =item FACET FIELDS $string = $trace->{details}, $string = $trace->details(), $frame = $trace->{frame}, $frame = $trace->frame(), $int = $trace->{pid}, $int = $trace->pid(), $int = $trace->{tid}, $int = $trace->tid(), $id = $trace->{cid}, $id = $trace->cid(), $uuid = $trace->{uuid}, $uuid = $trace->uuid() =over 4 =item DISCOURAGED HUB RELATED FIELDS $hid = $trace->{hid}, $hid = $trace->hid(), $huuid = $trace->{huuid}, $huuid = $trace->huuid(), $int = $trace->{nested}, $int = $trace->nested(), $bool = $trace->{buffered}, $bool = $trace->buffered() =back =item METHODS $trace->set_detail($msg), $msg = $trace->detail, $str = $trace->debug, $trace->alert($MESSAGE), $trace->throw($MESSAGE), ($package, $file, $line, $subname) = $trace->call(), $pkg = $trace->package, $file = $trace->file, $line = $trace->line, $subname = $trace->subname, $sig = trace->signature =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Formatter - Namespace for formatters. =over 4 =item DESCRIPTION =item CREATING FORMATTERS The number of tests that were planned, The number of tests actually seen, The number of tests which failed, A boolean indicating whether or not the test suite passed, A boolean indicating whether or not this call is for a subtest =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Formatter::TAP - Standard TAP formatter =over 4 =item DESCRIPTION =item SYNOPSIS =item METHODS $bool = $tap->no_numbers, $tap->set_no_numbers($bool), $arrayref = $tap->handles, $tap->set_handles(\@handles);, $encoding = $tap->encoding, $tap->encoding($encoding), $tap->write($e, $num) =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt>, Kent Fredric E<lt>kentnl@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Hub - The conduit through which all events flow. =over 4 =item SYNOPSIS =item DESCRIPTION =item COMMON TASKS =over 4 =item SENDING EVENTS =item ALTERING OR REMOVING EVENTS =item LISTENING FOR EVENTS =item POST-TEST BEHAVIORS =item SETTING THE FORMATTER =back =item METHODS $hub->send($event), $hub->process($event), $old = $hub->format($formatter), $sub = $hub->listen(sub { ... }, %optional_params), $hub->unlisten($sub), $sub = $hub->filter(sub { ... }, %optional_params), $sub = $hub->pre_filter(sub { ... }, %optional_params), $hub->unfilter($sub), $hub->pre_unfilter($sub), $hub->follow_op(sub { ... }), $sub = $hub->add_context_acquire(sub { ... });, $hub->remove_context_acquire($sub);, $sub = $hub->add_context_init(sub { ... });, $hub->remove_context_init($sub);, $sub = $hub->add_context_release(sub { ... });, $hub->remove_context_release($sub);, $hub->cull(), $pid = $hub->pid(), $tid = $hub->tid(), $hud = $hub->hid(), $uuid = $hub->uuid(), $ipc = $hub->ipc(), $hub->set_no_ending($bool), $bool = $hub->no_ending, $bool = $hub->active, $hub->set_active($bool) =over 4 =item STATE METHODS $hub->reset_state(), $num = $hub->count, $num = $hub->failed, $bool = $hub->ended, $bool = $hub->is_passing, $hub->is_passing($bool), $hub->plan($plan), $plan = $hub->plan, $bool = $hub->check_plan =back =item THIRD PARTY META-DATA =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Hub::Interceptor - Hub used by interceptor to grab results. =over 4 =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Hub::Interceptor::Terminator - Exception class used by Test2::Hub::Interceptor =over 4 =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Hub::Subtest - Hub used by subtests =over 4 =item DESCRIPTION =item TOGGLES $bool = $hub->manual_skip_all, $hub->set_manual_skip_all($bool) =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::IPC - Turn on IPC for threading or forking support. =over 4 =item SYNOPSIS =over 4 =item DISABLING IT =back =item EXPORTS cull() =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::IPC::Driver - Base class for Test2 IPC drivers. =over 4 =item SYNOPSIS =item METHODS $self->abort($msg), $self->abort_trace($msg) =item LOADING DRIVERS =item WRITING DRIVERS =over 4 =item METHODS SUBCLASSES MUST IMPLEMENT $ipc->is_viable, $ipc->add_hub($hid), $ipc->drop_hub($hid), $ipc->send($hid, $event);, $ipc->send($hid, $event, $global);, @events = $ipc->cull($hid), $ipc->waiting() =item METHODS SUBCLASSES MAY IMPLEMENT OR OVERRIDE $ipc->driver_abort($msg) =back =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::IPC::Driver::Files - Temp dir + Files concurrency model. =over 4 =item DESCRIPTION =item SYNOPSIS =item ENVIRONMENT VARIABLES T2_KEEP_TEMPDIR=0, T2_TEMPDIR_TEMPLATE='test2-XXXXXX' =item SEE ALSO =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Tools::Tiny - Tiny set of tools for unfortunate souls who cannot use L<Test2::Suite>. =over 4 =item DESCRIPTION =item USE Test2::Suite INSTEAD =item EXPORTS ok($bool, $name), ok($bool, $name, @diag), is($got, $want, $name), is($got, $want, $name, @diag), isnt($got, $do_not_want, $name), isnt($got, $do_not_want, $name, @diag), like($got, $regex, $name), like($got, $regex, $name, @diag), unlike($got, $regex, $name), unlike($got, $regex, $name, @diag), is_deeply($got, $want, $name), is_deeply($got, $want, $name, @diag), diag($msg), note($msg), skip_all($reason), todo $reason => sub { ... }, plan($count), done_testing(), $warnings = warnings { ... }, $exception = exception { ... }, tests $name => sub { ... }, $output = capture { ... } =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Transition - Transition notes when upgrading to Test2 =over 4 =item DESCRIPTION =item THINGS THAT BREAK =over 4 =item Test::Builder1.5/2 conditionals =item Replacing the Test::Builder singleton =item Directly Accessing Hash Elements =item Subtest indentation =back =item DISTRIBUTIONS THAT BREAK OR NEED TO BE UPGRADED =over 4 =item WORKS BUT TESTS WILL FAIL Test::DBIx::Class::Schema, Device::Chip =item UPGRADE SUGGESTED Test::Exception, Data::Peek, circular::require, Test::Module::Used, Test::Moose::More, Test::FITesque, Test::Kit, autouse =item NEED TO UPGRADE Test::SharedFork, Test::Builder::Clutch, Test::Dist::VersionSync, Test::Modern, Test::UseAllModules, Test::More::Prefix =item STILL BROKEN Test::Aggregate, Test::Wrapper, Test::ParallelSubtest, Test::Pretty, Net::BitTorrent, Test::Group, Test::Flatten, Log::Dispatch::Config::TestLog, Test::Able =back =item MAKE ASSERTIONS -> SEND EVENTS =over 4 =item LEGACY =item TEST2 ok($bool, $name), diag(@messages), note(@messages), subtest($name, $code) =back =item WRAP EXISTING TOOLS =over 4 =item LEGACY =item TEST2 =back =item USING UTF8 =over 4 =item LEGACY =item TEST2 =back =item AUTHORS, CONTRIBUTORS AND REVIEWERS Chad Granum (EXODIST) E<lt>exodist@cpan.orgE<gt> =item SOURCE =item MAINTAINER Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Util - Tools used by Test2 and friends. =over 4 =item DESCRIPTION =item EXPORTS ($success, $error) = try { ... }, protect { ... }, CAN_FORK, CAN_REALLY_FORK, CAN_THREAD, USE_THREADS, get_tid, my $file = pkg_to_file($package), $string = ipc_separator(), $string = gen_uid(), ($ok, $err) = do_rename($old_name, $new_name), ($ok, $err) = do_unlink($filename), ($ok, $err) = try_sig_mask { ... }, SIGINT, SIGALRM, SIGHUP, SIGTERM, SIGUSR1, SIGUSR2 =item NOTES && CAVEATS Devel::Cover =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt>, Kent Fredric E<lt>kentnl@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Util::ExternalMeta - Allow third party tools to safely attach meta-data to your instances. =over 4 =item DESCRIPTION =item SYNOPSIS =item WHERE IS THE DATA STORED? =item EXPORTS $val = $obj->meta($key), $val = $obj->meta($key, $default), $val = $obj->get_meta($key), $val = $obj->delete_meta($key), $obj->set_meta($key, $val) =item META-KEY RESTRICTIONS =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Util::Facets2Legacy - Convert facet data to the legacy event API. =over 4 =item DESCRIPTION =item SYNOPSIS =over 4 =item AS METHODS =item AS FUNCTIONS =back =item NOTE ON CYCLES =item EXPORTS $bool = $e->causes_fail(), $bool = causes_fail($f), $bool = $e->diagnostics(), $bool = diagnostics($f), $bool = $e->global(), $bool = global($f), $bool = $e->increments_count(), $bool = increments_count($f), $bool = $e->no_display(), $bool = no_display($f), ($max, $directive, $reason) = $e->sets_plan(), ($max, $directive, $reason) = sets_plan($f), $id = $e->subtest_id(), $id = subtest_id($f), $string = $e->summary(), $string = summary($f), $undef_or_int = $e->terminate(), $undef_or_int = terminate($f), $uuid = $e->uuid(), $uuid = uuid($f) =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Util::HashBase - Build hash based classes. =over 4 =item SYNOPSIS =item DESCRIPTION =item THIS IS A BUNDLED COPY OF HASHBASE =item METHODS =over 4 =item PROVIDED BY HASH BASE $it = $class->new(%PAIRS), $it = $class->new(\%PAIRS), $it = $class->new(\@ORDERED_VALUES) =item HOOKS $self->init() =back =item ACCESSORS =over 4 =item READ/WRITE foo(), set_foo(), FOO() =item READ ONLY set_foo() =item DEPRECATED SETTER set_foo() =item NO SETTER =item NO READER =item CONSTANT ONLY =back =item SUBCLASSING =item GETTING A LIST OF ATTRIBUTES FOR A CLASS @list = Test2::Util::HashBase::attr_list($class), @list = $class->Test2::Util::HashBase::attr_list() =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test2::Util::Trace - Legacy wrapper fro L<Test2::EventFacet::Trace>. =over 4 =item DESCRIPTION =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test::Builder - Backend for building test libraries =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Construction B<new>, B<create>, B<subtest>, B<name>, B<reset> =item Setting up tests B<plan>, B<expected_tests>, B<no_plan>, B<done_testing>, B<has_plan>, B<skip_all>, B<exported_to> =item Running tests B<ok>, B<is_eq>, B<is_num>, B<isnt_eq>, B<isnt_num>, B<like>, B<unlike>, B<cmp_ok> =item Other Testing Methods B<BAIL_OUT>, B<skip>, B<todo_skip>, B<skip_rest> =item Test building utility methods B<maybe_regex>, B<is_fh> =back =back =over 4 =item Test style B<level>, B<use_numbers>, B<no_diag>, B<no_ending>, B<no_header> =item Output B<diag>, B<note>, B<explain>, B<output>, B<failure_output>, B<todo_output>, reset_outputs, carp, croak =item Test Status and Info B<no_log_results>, B<current_test>, B<is_passing>, B<summary>, B<details>, B<todo>, B<find_TODO>, B<in_todo>, B<todo_start>, C<todo_end>, B<caller> =back =over 4 =item EXIT CODES =item THREADS =item MEMORY =item EXAMPLES =item SEE ALSO =over 4 =item INTERNALS =item LEGACY =item EXTERNAL =back =item AUTHORS =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test::Builder::Formatter - Test::Builder subclass of Test2::Formatter::TAP =over 4 =item DESCRIPTION =item SYNOPSIS =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test::Builder::IO::Scalar - A copy of IO::Scalar for Test::Builder =over 4 =item DESCRIPTION =item COPYRIGHT and LICENSE =back =over 4 =item Construction =back new [ARGS...] open [SCALARREF] opened close =over 4 =item Input and output =back flush getc getline getlines print ARGS.. read BUF, NBYTES, [OFFSET] write BUF, NBYTES, [OFFSET] sysread BUF, LEN, [OFFSET] syswrite BUF, NBYTES, [OFFSET] =over 4 =item Seeking/telling and other attributes =back autoflush binmode clearerr eof seek OFFSET, WHENCE sysseek OFFSET, WHENCE tell use_RS [YESNO] setpos POS getpos sref =over 4 =item WARNINGS =item VERSION =item AUTHORS =over 4 =item Primary Maintainer =item Principal author =item Other contributors =back =item SEE ALSO =back =head2 Test::Builder::Module - Base class for test modules =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Importing =back =back =over 4 =item Builder =back =over 4 =item SEE ALSO =back =head2 Test::Builder::Tester - test testsuites that have been built with Test::Builder =over 4 =item SYNOPSIS =item DESCRIPTION =back =over 4 =item Functions test_out, test_err =back test_fail test_diag test_test, title (synonym 'name', 'label'), skip_out, skip_err line_num color =over 4 =item BUGS =item AUTHOR =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item NOTES =item SEE ALSO =back =head2 Test::Builder::Tester::Color - turn on colour in Test::Builder::Tester =over 4 =item SYNOPSIS =item DESCRIPTION =back =over 4 =item AUTHOR =item BUGS =item SEE ALSO =back =head2 Test::Builder::TodoDiag - Test::Builder subclass of Test2::Event::Diag =over 4 =item DESCRIPTION =item SYNOPSIS =item SOURCE =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item AUTHORS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test::Harness - Run Perl standard test scripts with statistics =over 4 =item VERSION =back =over 4 =item SYNOPSIS =item DESCRIPTION =item FUNCTIONS =over 4 =item runtests( @test_files ) =back =back =over 4 =item execute_tests( tests => \@test_files, out => \*FH ) =back =over 4 =item EXPORT =item ENVIRONMENT VARIABLES THAT TAP::HARNESS::COMPATIBLE SETS C<HARNESS_ACTIVE>, C<HARNESS_VERSION> =item ENVIRONMENT VARIABLES THAT AFFECT TEST::HARNESS C<HARNESS_PERL_SWITCHES>, C<HARNESS_TIMER>, C<HARNESS_VERBOSE>, C<HARNESS_OPTIONS>, C<< j<n> >>, C<< c >>, C<< a<file.tgz> >>, C<< fPackage-With-Dashes >>, C<HARNESS_SUBCLASS>, C<HARNESS_SUMMARY_COLOR_SUCCESS>, C<HARNESS_SUMMARY_COLOR_FAIL> =item Taint Mode =item SEE ALSO =item BUGS =item AUTHORS =item LICENCE AND COPYRIGHT =back =head2 Test::More - yet another framework for writing test scripts =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item I love it when a plan comes together =back =back B<done_testing> =over 4 =item Test names =item I'm ok, you're not ok. B<ok> =back B<is>, B<isnt> B<like> B<unlike> B<cmp_ok> B<can_ok> B<isa_ok> B<new_ok> B<subtest> B<pass>, B<fail> =over 4 =item Module tests B<require_ok> =back B<use_ok> =over 4 =item Complex data structures B<is_deeply> =back =over 4 =item Diagnostics B<diag>, B<note> =back B<explain> =over 4 =item Conditional tests B<SKIP: BLOCK> =back B<TODO: BLOCK>, B<todo_skip> When do I use SKIP vs. TODO? =over 4 =item Test control B<BAIL_OUT> =back =over 4 =item Discouraged comparison functions B<eq_array> =back B<eq_hash> B<eq_set> =over 4 =item Extending and Embedding Test::More B<builder> =back =over 4 =item EXIT CODES =item COMPATIBILITY subtests, C<done_testing()>, C<cmp_ok()>, C<new_ok()> C<note()> and C<explain()> =item CAVEATS and NOTES utf8 / "Wide character in print", Overloaded objects, Threads =item HISTORY =item SEE ALSO =over 4 =item ALTERNATIVES =item ADDITIONAL LIBRARIES =item OTHER COMPONENTS =item BUNDLES =back =item AUTHORS =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item BUGS =item SOURCE =item COPYRIGHT =back =head2 Test::Simple - Basic utilities for writing tests. =over 4 =item SYNOPSIS =item DESCRIPTION B<ok> =back =over 4 =item EXAMPLE =item CAVEATS =item NOTES =item HISTORY =item SEE ALSO L<Test::More> =item AUTHORS =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test::Tester - Ease testing test modules built with Test::Builder =over 4 =item SYNOPSIS =item DESCRIPTION =item HOW TO USE (THE EASY WAY) =item HOW TO USE (THE HARD WAY) =item TEST RESULTS ok, actual_ok, name, type, reason, diag, depth =item SPACES AND TABS =item COLOUR =item EXPORTED FUNCTIONS =item HOW IT WORKS =item CAVEATS =item SEE ALSO =item AUTHOR =item LICENSE =back =head2 Test::Tester::Capture - Help testing test modules built with Test::Builder =over 4 =item DESCRIPTION =item AUTHOR =item LICENSE =back =head2 Test::Tester::CaptureRunner - Help testing test modules built with Test::Builder =over 4 =item DESCRIPTION =item AUTHOR =item LICENSE =back =head2 Test::Tutorial - A tutorial about writing really basic tests =over 4 =item DESCRIPTION =over 4 =item Nuts and bolts of testing. =item Where to start? =item Names =item Test the manual =item Sometimes the tests are wrong =item Testing lots of values =item Informative names =item Skipping tests =item Todo tests =item Testing with taint mode. =back =item FOOTNOTES =item AUTHORS =item MAINTAINERS Chad Granum E<lt>exodist@cpan.orgE<gt> =item COPYRIGHT =back =head2 Test::use::ok - Alternative to Test::More::use_ok =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =item MAINTAINER Chad Granum E<lt>exodist@cpan.orgE<gt> =item CC0 1.0 Universal =back =head2 Text::Abbrev - abbrev - create an abbreviation table from a list =over 4 =item SYNOPSIS =item DESCRIPTION =item EXAMPLE =back =head2 Text::Balanced - Extract delimited text sequences from strings. =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item General behaviour in list contexts [0], [1], [2] =item General behaviour in scalar and void contexts =item A note about prefixes =item C<extract_delimited> =item C<extract_bracketed> =item C<extract_variable> [0], [1], [2] =item C<extract_tagged> C<reject =E<gt> $listref>, C<ignore =E<gt> $listref>, C<fail =E<gt> $str>, [0], [1], [2], [3], [4], [5] =item C<gen_extract_tagged> =item C<extract_quotelike> [0], [1], [2], [3], [4], [5], [6], [7], [8], [9], [10] =item C<extract_quotelike> and "here documents" [0], [1], [2], [3], [4], [5], [6], [7..10] =item C<extract_codeblock> =item C<extract_multiple> =item C<gen_delimited_pat> =item C<delimited_pat> =back =item DIAGNOSTICS C<Did not find a suitable bracket: "%s">, C<Did not find prefix: /%s/>, C<Did not find opening bracket after prefix: "%s">, C<No quotelike operator found after prefix: "%s">, C<Unmatched closing bracket: "%c">, C<Unmatched opening bracket(s): "%s">, C<Unmatched embedded quote (%s)>, C<Did not find closing delimiter to match '%s'>, C<Mismatched closing bracket: expected "%c" but found "%s">, C<No block delimiter found after quotelike "%s">, C<Did not find leading dereferencer>, C<Bad identifier after dereferencer>, C<Did not find expected opening bracket at %s>, C<Improperly nested codeblock at %s>, C<Missing second block for quotelike "%s">, C<No match found for opening bracket>, C<Did not find opening tag: /%s/>, C<Unable to construct closing tag to match: /%s/>, C<Found invalid nested tag: %s>, C<Found unbalanced nested tag: %s>, C<Did not find closing tag> =item AUTHOR =item BUGS AND IRRITATIONS =item COPYRIGHT =back =head2 Text::ParseWords - parse text into an array of tokens or array of arrays =over 4 =item SYNOPSIS =item DESCRIPTION =item EXAMPLES 0Z<>, 1Z<>, 2Z<>, 3Z<>, 4Z<>, 5Z<> =item SEE ALSO =item AUTHORS =item COPYRIGHT AND LICENSE =back =head2 Text::Tabs - expand and unexpand tabs like unix expand(1) and unexpand(1) =over 4 =item SYNOPSIS =item DESCRIPTION =item EXPORTS expand, unexpand, $tabstop =item EXAMPLE =item SUBVERSION =item BUGS =item LICENSE =back =head2 Text::Wrap - line wrapping to form simple paragraphs =over 4 =item SYNOPSIS =item DESCRIPTION =item OVERRIDES =item EXAMPLES =item SUBVERSION =item SEE ALSO =item AUTHOR =item LICENSE =back =head2 Thread - Manipulate threads in Perl (for old code only) =over 4 =item DEPRECATED =item HISTORY =item SYNOPSIS =item DESCRIPTION =item FUNCTIONS $thread = Thread->new(\&start_sub), $thread = Thread->new(\&start_sub, LIST), lock VARIABLE, async BLOCK;, Thread->self, Thread->list, cond_wait VARIABLE, cond_signal VARIABLE, cond_broadcast VARIABLE, yield =item METHODS join, detach, equal, tid, done =item DEFUNCT lock(\&sub), eval, flags =item SEE ALSO =back =head2 Thread::Queue - Thread-safe queues =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION Ordinary scalars, Array refs, Hash refs, Scalar refs, Objects based on the above =item QUEUE CREATION ->new(), ->new(LIST) =item BASIC METHODS ->enqueue(LIST), ->dequeue(), ->dequeue(COUNT), ->dequeue_nb(), ->dequeue_nb(COUNT), ->dequeue_timed(TIMEOUT), ->dequeue_timed(TIMEOUT, COUNT), ->pending(), ->limit, ->end() =item ADVANCED METHODS ->peek(), ->peek(INDEX), ->insert(INDEX, LIST), ->extract(), ->extract(INDEX), ->extract(INDEX, COUNT) =item NOTES =item LIMITATIONS =item SEE ALSO =item MAINTAINER =item LICENSE =back =head2 Thread::Semaphore - Thread-safe semaphores =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item METHODS ->new(), ->new(NUMBER), ->down(), ->down(NUMBER), ->down_nb(), ->down_nb(NUMBER), ->down_force(), ->down_force(NUMBER), ->down_timed(TIMEOUT), ->down_timed(TIMEOUT, NUMBER), ->up(), ->up(NUMBER) =item NOTES =item SEE ALSO =item MAINTAINER =item LICENSE =back =head2 Tie::Array - base class for tied arrays =over 4 =item SYNOPSIS =item DESCRIPTION TIEARRAY classname, LIST, STORE this, index, value, FETCH this, index, FETCHSIZE this, STORESIZE this, count, EXTEND this, count, EXISTS this, key, DELETE this, key, CLEAR this, DESTROY this, PUSH this, LIST, POP this, SHIFT this, UNSHIFT this, LIST, SPLICE this, offset, length, LIST =item CAVEATS =item AUTHOR =back =head2 Tie::File - Access the lines of a disk file via a Perl array =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item C<recsep> =item C<autochomp> =item C<mode> =item C<memory> =item C<dw_size> =item Option Format =back =item Public Methods =over 4 =item C<flock> =item C<autochomp> =item C<defer>, C<flush>, C<discard>, and C<autodefer> =item C<offset> =back =item Tying to an already-opened filehandle =item Deferred Writing =over 4 =item Autodeferring =back =item CONCURRENT ACCESS TO FILES =item CAVEATS =item SUBCLASSING =item WHAT ABOUT C<DB_File>? =item AUTHOR =item LICENSE =item WARRANTY =item THANKS =item TODO =back =head2 Tie::Handle - base class definitions for tied handles =over 4 =item SYNOPSIS =item DESCRIPTION TIEHANDLE classname, LIST, WRITE this, scalar, length, offset, PRINT this, LIST, PRINTF this, format, LIST, READ this, scalar, length, offset, READLINE this, GETC this, CLOSE this, OPEN this, filename, BINMODE this, EOF this, TELL this, SEEK this, offset, whence, DESTROY this =item MORE INFORMATION =item COMPATIBILITY =back =head2 Tie::Hash, Tie::StdHash, Tie::ExtraHash - base class definitions for tied hashes =over 4 =item SYNOPSIS =item DESCRIPTION TIEHASH classname, LIST, STORE this, key, value, FETCH this, key, FIRSTKEY this, NEXTKEY this, lastkey, EXISTS this, key, DELETE this, key, CLEAR this, SCALAR this =item Inheriting from B<Tie::StdHash> =item Inheriting from B<Tie::ExtraHash> =item C<SCALAR>, C<UNTIE> and C<DESTROY> =item MORE INFORMATION =back =head2 Tie::Hash::NamedCapture - Named regexp capture buffers =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO =back =head2 Tie::Memoize - add data to hash when needed =over 4 =item SYNOPSIS =item DESCRIPTION =item Inheriting from B<Tie::Memoize> =item EXAMPLE =item BUGS =item AUTHOR =back =head2 Tie::RefHash - use references as hash keys =over 4 =item SYNOPSIS =item DESCRIPTION =item EXAMPLE =item THREAD SUPPORT =item STORABLE SUPPORT =item RELIC SUPPORT =item LICENSE =item MAINTAINER =item AUTHOR =item SEE ALSO =back =head2 Tie::Scalar, Tie::StdScalar - base class definitions for tied scalars =over 4 =item SYNOPSIS =item DESCRIPTION TIESCALAR classname, LIST, FETCH this, STORE this, value, DESTROY this =over 4 =item Tie::Scalar vs Tie::StdScalar =back =item MORE INFORMATION =back =head2 Tie::StdHandle - base class definitions for tied handles =over 4 =item SYNOPSIS =item DESCRIPTION =back =head2 Tie::SubstrHash - Fixed-table-size, fixed-key-length hashing =over 4 =item SYNOPSIS =item DESCRIPTION =item CAVEATS =back =head2 Time::HiRes - High resolution alarm, sleep, gettimeofday, interval timers =over 4 =item SYNOPSIS =item DESCRIPTION gettimeofday (), usleep ( $useconds ), nanosleep ( $nanoseconds ), ualarm ( $useconds [, $interval_useconds ] ), tv_interval, time (), sleep ( $floating_seconds ), alarm ( $floating_seconds [, $interval_floating_seconds ] ), setitimer ( $which, $floating_seconds [, $interval_floating_seconds ] ), getitimer ( $which ), clock_gettime ( $which ), clock_getres ( $which ), clock_nanosleep ( $which, $nanoseconds, $flags = 0), clock(), stat, stat FH, stat EXPR, lstat, lstat FH, lstat EXPR, utime LIST =item EXAMPLES =item C API =item DIAGNOSTICS =over 4 =item useconds or interval more than ... =item negative time not invented yet =item internal error: useconds < 0 (unsigned ... signed ...) =item useconds or uinterval equal to or more than 1000000 =item unimplemented in this platform =back =item CAVEATS =item SEE ALSO =item AUTHORS =item COPYRIGHT AND LICENSE =back =head2 Time::Local - Efficiently compute time from local and GMT time =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =item FUNCTIONS =over 4 =item C<timelocal_modern()> and C<timegm_modern()> =item C<timelocal()> and C<timegm()> =item C<timelocal_nocheck()> and C<timegm_nocheck()> =item Year Value Interpretation =item Limits of time_t =item Ambiguous Local Times (DST) =item Non-Existent Local Times (DST) =item Negative Epoch Values =back =item IMPLEMENTATION =item AUTHORS EMERITUS =item BUGS =item SOURCE =item AUTHOR =item CONTRIBUTORS =item COPYRIGHT AND LICENSE =back =head2 Time::Piece - Object Oriented time objects =over 4 =item SYNOPSIS =item DESCRIPTION =item USAGE =over 4 =item Local Locales =item Date Calculations =item Truncation =item Date Comparisons =item Date Parsing =item YYYY-MM-DDThh:mm:ss =item Week Number =item Global Overriding =back =item CAVEATS =over 4 =item Setting $ENV{TZ} in Threads on Win32 =item Use of epoch seconds =back =item AUTHOR =item COPYRIGHT AND LICENSE =item SEE ALSO =item BUGS =back =head2 Time::Seconds - a simple API to convert seconds to other date values =over 4 =item SYNOPSIS =item DESCRIPTION =item METHODS =item AUTHOR =item COPYRIGHT AND LICENSE =item Bugs =back =head2 Time::gmtime - by-name interface to Perl's built-in gmtime() function =over 4 =item SYNOPSIS =item DESCRIPTION =item NOTE =item AUTHOR =back =head2 Time::localtime - by-name interface to Perl's built-in localtime() function =over 4 =item SYNOPSIS =item DESCRIPTION =item NOTE =item AUTHOR =back =head2 Time::tm - internal object used by Time::gmtime and Time::localtime =over 4 =item SYNOPSIS =item DESCRIPTION =item AUTHOR =back =head2 UNIVERSAL - base class for ALL classes (blessed references) =over 4 =item SYNOPSIS =item DESCRIPTION C<< $obj->isa( TYPE ) >>, C<< CLASS->isa( TYPE ) >>, C<< eval { VAL->isa( TYPE ) } >>, C<TYPE>, C<$obj>, C<CLASS>, C<VAL>, C<< $obj->DOES( ROLE ) >>, C<< CLASS->DOES( ROLE ) >>, C<< $obj->can( METHOD ) >>, C<< CLASS->can( METHOD ) >>, C<< eval { VAL->can( METHOD ) } >>, C<VERSION ( [ REQUIRE ] )> =item WARNINGS =item EXPORTS =back =head2 Unicode::Collate - Unicode Collation Algorithm =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Constructor and Tailoring UCA_Version, alternate, backwards, entry, hangul_terminator, highestFFFF, identical, ignoreChar, ignoreName, ignore_level2, katakana_before_hiragana, level, long_contraction, minimalFFFE, normalization, overrideCJK, overrideHangul, overrideOut, preprocess, rearrange, rewrite, suppress, table, undefChar, undefName, upper_before_lower, variable =item Methods for Collation C<@sorted = $Collator-E<gt>sort(@not_sorted)>, C<$result = $Collator-E<gt>cmp($a, $b)>, C<$result = $Collator-E<gt>eq($a, $b)>, C<$result = $Collator-E<gt>ne($a, $b)>, C<$result = $Collator-E<gt>lt($a, $b)>, C<$result = $Collator-E<gt>le($a, $b)>, C<$result = $Collator-E<gt>gt($a, $b)>, C<$result = $Collator-E<gt>ge($a, $b)>, C<$sortKey = $Collator-E<gt>getSortKey($string)>, C<$sortKeyForm = $Collator-E<gt>viewSortKey($string)> =item Methods for Searching C<$position = $Collator-E<gt>index($string, $substring[, $position])>, C<($position, $length) = $Collator-E<gt>index($string, $substring[, $position])>, C<$match_ref = $Collator-E<gt>match($string, $substring)>, C<($match) = $Collator-E<gt>match($string, $substring)>, C<@match = $Collator-E<gt>gmatch($string, $substring)>, C<$count = $Collator-E<gt>subst($string, $substring, $replacement)>, C<$count = $Collator-E<gt>gsubst($string, $substring, $replacement)> =item Other Methods C<%old_tailoring = $Collator-E<gt>change(%new_tailoring)>, C<$modified_collator = $Collator-E<gt>change(%new_tailoring)>, C<$version = $Collator-E<gt>version()>, C<UCA_Version()>, C<Base_Unicode_Version()> =back =item EXPORT =item INSTALL =item CAVEATS Normalization, Conformance Test =item AUTHOR, COPYRIGHT AND LICENSE =item SEE ALSO Unicode Collation Algorithm - UTS #10, The Default Unicode Collation Element Table (DUCET), The conformance test for the UCA, Hangul Syllable Type, Unicode Normalization Forms - UAX #15, Unicode Locale Data Markup Language (LDML) - UTS #35 =back =head2 Unicode::Collate::CJK::Big5 - weighting CJK Unified Ideographs for Unicode::Collate =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO CLDR - Unicode Common Locale Data Repository, Unicode Locale Data Markup Language (LDML) - UTS #35, L<Unicode::Collate>, L<Unicode::Collate::Locale> =back =head2 Unicode::Collate::CJK::GB2312 - weighting CJK Unified Ideographs for Unicode::Collate =over 4 =item SYNOPSIS =item DESCRIPTION =item CAVEAT =item SEE ALSO CLDR - Unicode Common Locale Data Repository, Unicode Locale Data Markup Language (LDML) - UTS #35, L<Unicode::Collate>, L<Unicode::Collate::Locale> =back =head2 Unicode::Collate::CJK::JISX0208 - weighting JIS KANJI for Unicode::Collate =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO L<Unicode::Collate>, L<Unicode::Collate::Locale> =back =head2 Unicode::Collate::CJK::Korean - weighting CJK Unified Ideographs for Unicode::Collate =over 4 =item SYNOPSIS =item DESCRIPTION =item SEE ALSO CLDR - Unicode Common Locale Data Repository, Unicode Locale Data Markup Language (LDML) - UTS #35, L<Unicode::Collate>, L<Unicode::Collate::Locale> =back =head2 Unicode::Collate::CJK::Pinyin - weighting CJK Unified Ideographs for Unicode::Collate =over 4 =item SYNOPSIS =item DESCRIPTION =item CAVEAT =item SEE ALSO CLDR - Unicode Common Locale Data Repository, Unicode Locale Data Markup Language (LDML) - UTS #35, L<Unicode::Collate>, L<Unicode::Collate::Locale> =back =head2 Unicode::Collate::CJK::Stroke - weighting CJK Unified Ideographs for Unicode::Collate =over 4 =item SYNOPSIS =item DESCRIPTION =item CAVEAT =item SEE ALSO CLDR - Unicode Common Locale Data Repository, Unicode Locale Data Markup Language (LDML) - UTS #35, L<Unicode::Collate>, L<Unicode::Collate::Locale> =back =head2 Unicode::Collate::CJK::Zhuyin - weighting CJK Unified Ideographs for Unicode::Collate =over 4 =item SYNOPSIS =item DESCRIPTION =item CAVEAT =item SEE ALSO CLDR - Unicode Common Locale Data Repository, Unicode Locale Data Markup Language (LDML) - UTS #35, L<Unicode::Collate>, L<Unicode::Collate::Locale> =back =head2 Unicode::Collate::Locale - Linguistic tailoring for DUCET via Unicode::Collate =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Constructor =item Methods C<$Collator-E<gt>getlocale>, C<$Collator-E<gt>locale_version> =item A list of tailorable locales =item A list of variant codes and their aliases =back =item INSTALL =item CAVEAT Tailoring is not maximum, Collation reordering is not supported =over 4 =item Reference =back =item AUTHOR =item SEE ALSO Unicode Collation Algorithm - UTS #10, The Default Unicode Collation Element Table (DUCET), Unicode Locale Data Markup Language (LDML) - UTS #35, CLDR - Unicode Common Locale Data Repository, L<Unicode::Collate>, L<Unicode::Normalize> =back =head2 Unicode::Normalize - Unicode Normalization Forms =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item Normalization Forms C<$NFD_string = NFD($string)>, C<$NFC_string = NFC($string)>, C<$NFKD_string = NFKD($string)>, C<$NFKC_string = NFKC($string)>, C<$FCD_string = FCD($string)>, C<$FCC_string = FCC($string)>, C<$normalized_string = normalize($form_name, $string)> =item Decomposition and Composition C<$decomposed_string = decompose($string [, $useCompatMapping])>, C<$reordered_string = reorder($string)>, C<$composed_string = compose($string)>, C<($processed, $unprocessed) = splitOnLastStarter($normalized)>, C<$processed = normalize_partial($form, $unprocessed)>, C<$processed = NFD_partial($unprocessed)>, C<$processed = NFC_partial($unprocessed)>, C<$processed = NFKD_partial($unprocessed)>, C<$processed = NFKC_partial($unprocessed)> =item Quick Check C<$result = checkNFD($string)>, C<$result = checkNFC($string)>, C<$result = checkNFKD($string)>, C<$result = checkNFKC($string)>, C<$result = checkFCD($string)>, C<$result = checkFCC($string)>, C<$result = check($form_name, $string)> =item Character Data C<$canonical_decomposition = getCanon($code_point)>, C<$compatibility_decomposition = getCompat($code_point)>, C<$code_point_composite = getComposite($code_point_here, $code_point_next)>, C<$combining_class = getCombinClass($code_point)>, C<$may_be_composed_with_prev_char = isComp2nd($code_point)>, C<$is_exclusion = isExclusion($code_point)>, C<$is_singleton = isSingleton($code_point)>, C<$is_non_starter_decomposition = isNonStDecomp($code_point)>, C<$is_Full_Composition_Exclusion = isComp_Ex($code_point)>, C<$NFD_is_NO = isNFD_NO($code_point)>, C<$NFC_is_NO = isNFC_NO($code_point)>, C<$NFC_is_MAYBE = isNFC_MAYBE($code_point)>, C<$NFKD_is_NO = isNFKD_NO($code_point)>, C<$NFKC_is_NO = isNFKC_NO($code_point)>, C<$NFKC_is_MAYBE = isNFKC_MAYBE($code_point)> =back =item EXPORT =item CAVEATS Perl's version vs. Unicode version, Correction of decomposition mapping, Revised definition of canonical composition =item AUTHOR =item LICENSE =item SEE ALSO L<http://www.unicode.org/reports/tr15/>, L<http://www.unicode.org/Public/UNIDATA/CompositionExclusions.txt>, L<http://www.unicode.org/Public/UNIDATA/DerivedNormalizationProps.txt>, L<http://www.unicode.org/Public/UNIDATA/NormalizationCorrections.txt>, L<http://www.unicode.org/review/pr-29.html>, L<http://www.unicode.org/notes/tn5/> =back =head2 Unicode::UCD - Unicode character database =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item code point argument =back =back =over 4 =item B<charinfo()> B<code>, B<name>, B<category>, B<combining>, B<bidi>, B<decomposition>, B<decimal>, B<digit>, B<numeric>, B<mirrored>, B<unicode10>, B<comment>, B<upper>, B<lower>, B<title>, B<block>, B<script> =back =over 4 =item B<charprop()> Block, Decomposition_Mapping, Name_Alias, Numeric_Value, Script_Extensions =back =over 4 =item B<charprops_all()> =back =over 4 =item B<charblock()> =back =over 4 =item B<charscript()> =back =over 4 =item B<charblocks()> =back =over 4 =item B<charscripts()> =back =over 4 =item B<charinrange()> =back =over 4 =item B<general_categories()> =back =over 4 =item B<bidi_types()> =back =over 4 =item B<compexcl()> =back =over 4 =item B<casefold()> B<code>, B<full>, B<simple>, B<mapping>, B<status>, Z<>B<*> If you use this C<I> mapping, Z<>B<*> If you exclude this C<I> mapping, B<turkic> =back =over 4 =item B<all_casefolds()> =back =over 4 =item B<casespec()> B<code>, B<lower>, B<title>, B<upper>, B<condition> =back =over 4 =item B<namedseq()> =back =over 4 =item B<num()> =back =over 4 =item B<prop_aliases()> =back =over 4 =item B<prop_values()> =back =over 4 =item B<prop_value_aliases()> =back =over 4 =item B<prop_invlist()> =back =over 4 =item B<prop_invmap()> B<C<s>>, B<C<sl>>, C<correction>, C<control>, C<alternate>, C<figment>, C<abbreviation>, B<C<a>>, B<C<al>>, B<C<ae>>, B<C<ale>>, B<C<ar>>, B<C<n>>, B<C<ad>> =back =over 4 =item B<search_invlist()> =back =over 4 =item Unicode::UCD::UnicodeVersion =back =over 4 =item B<Blocks versus Scripts> =item B<Matching Scripts and Blocks> =item Old-style versus new-style block names =item Use with older Unicode versions =back =over 4 =item AUTHOR =back =head2 User::grent - by-name interface to Perl's built-in getgr*() functions =over 4 =item SYNOPSIS =item DESCRIPTION =item NOTE =item AUTHOR =back =head2 User::pwent - by-name interface to Perl's built-in getpw*() functions =over 4 =item SYNOPSIS =item DESCRIPTION =over 4 =item System Specifics =back =item NOTE =item AUTHOR =item HISTORY March 18th, 2000 =back =head2 XSLoader - Dynamically load C libraries into Perl code =over 4 =item VERSION =item SYNOPSIS =item DESCRIPTION =over 4 =item Migration from C<DynaLoader> =item Backward compatible boilerplate =back =item Order of initialization: early load() =over 4 =item The most hairy case =back =item DIAGNOSTICS C<Can't find '%s' symbol in %s>, C<Can't load '%s' for module %s: %s>, C<Undefined symbols present after loading %s: %s> =item LIMITATIONS =item KNOWN BUGS =item BUGS =item SEE ALSO =item AUTHORS =item COPYRIGHT & LICENSE =back =head1 AUXILIARY DOCUMENTATION Here should be listed all the extra programs' documentation, but they don't all have manual pages yet: =over 4 =item h2ph =item h2xs =item perlbug =item pl2pm =item pod2html =item pod2man =item splain =item xsubpp =back =head1 AUTHOR Larry Wall <F<larry@wall.org>>, with the help of oodles of other folks. perlstyle.pod 0000644 00000021036 15125556335 0007307 0 ustar 00 =head1 NAME perlstyle - Perl style guide =head1 DESCRIPTION Each programmer will, of course, have his or her own preferences in regards to formatting, but there are some general guidelines that will make your programs easier to read, understand, and maintain. The most important thing is to use L<strict> and L<warnings> in all your code or know the reason why not to. You may turn them off explicitly for particular portions of code via C<no warnings> or C<no strict>, and this can be limited to the specific warnings or strict features you wish to disable. The B<-w> flag and C<$^W> variable should not be used for this purpose since they can affect code you use but did not write, such as modules from core or CPAN. Regarding aesthetics of code lay out, about the only thing Larry cares strongly about is that the closing curly bracket of a multi-line BLOCK should line up with the keyword that started the construct. Beyond that, he has other preferences that aren't so strong: =over 4 =item * 4-column indent. =item * Opening curly on same line as keyword, if possible, otherwise line up. =item * Space before the opening curly of a multi-line BLOCK. =item * One-line BLOCK may be put on one line, including curlies. =item * No space before the semicolon. =item * Semicolon omitted in "short" one-line BLOCK. =item * Space around most operators. =item * Space around a "complex" subscript (inside brackets). =item * Blank lines between chunks that do different things. =item * Uncuddled elses. =item * No space between function name and its opening parenthesis. =item * Space after each comma. =item * Long lines broken after an operator (except C<and> and C<or>). =item * Space after last parenthesis matching on current line. =item * Line up corresponding items vertically. =item * Omit redundant punctuation as long as clarity doesn't suffer. =back Larry has his reasons for each of these things, but he doesn't claim that everyone else's mind works the same as his does. Here are some other more substantive style issues to think about: =over 4 =item * Just because you I<CAN> do something a particular way doesn't mean that you I<SHOULD> do it that way. Perl is designed to give you several ways to do anything, so consider picking the most readable one. For instance open(my $fh, '<', $foo) || die "Can't open $foo: $!"; is better than die "Can't open $foo: $!" unless open(my $fh, '<', $foo); because the second way hides the main point of the statement in a modifier. On the other hand print "Starting analysis\n" if $verbose; is better than $verbose && print "Starting analysis\n"; because the main point isn't whether the user typed B<-v> or not. Similarly, just because an operator lets you assume default arguments doesn't mean that you have to make use of the defaults. The defaults are there for lazy systems programmers writing one-shot programs. If you want your program to be readable, consider supplying the argument. Along the same lines, just because you I<CAN> omit parentheses in many places doesn't mean that you ought to: return print reverse sort num values %array; return print(reverse(sort num (values(%array)))); When in doubt, parenthesize. At the very least it will let some poor schmuck bounce on the % key in B<vi>. Even if you aren't in doubt, consider the mental welfare of the person who has to maintain the code after you, and who will probably put parentheses in the wrong place. =item * Don't go through silly contortions to exit a loop at the top or the bottom, when Perl provides the C<last> operator so you can exit in the middle. Just "outdent" it a little to make it more visible: LINE: for (;;) { statements; last LINE if $foo; next LINE if /^#/; statements; } =item * Don't be afraid to use loop labels--they're there to enhance readability as well as to allow multilevel loop breaks. See the previous example. =item * Avoid using C<grep()> (or C<map()>) or `backticks` in a void context, that is, when you just throw away their return values. Those functions all have return values, so use them. Otherwise use a C<foreach()> loop or the C<system()> function instead. =item * For portability, when using features that may not be implemented on every machine, test the construct in an eval to see if it fails. If you know what version or patchlevel a particular feature was implemented, you can test C<$]> (C<$PERL_VERSION> in C<English>) to see if it will be there. The C<Config> module will also let you interrogate values determined by the B<Configure> program when Perl was installed. =item * Choose mnemonic identifiers. If you can't remember what mnemonic means, you've got a problem. =item * While short identifiers like C<$gotit> are probably ok, use underscores to separate words in longer identifiers. It is generally easier to read C<$var_names_like_this> than C<$VarNamesLikeThis>, especially for non-native speakers of English. It's also a simple rule that works consistently with C<VAR_NAMES_LIKE_THIS>. Package names are sometimes an exception to this rule. Perl informally reserves lowercase module names for "pragma" modules like C<integer> and C<strict>. Other modules should begin with a capital letter and use mixed case, but probably without underscores due to limitations in primitive file systems' representations of module names as files that must fit into a few sparse bytes. =item * You may find it helpful to use letter case to indicate the scope or nature of a variable. For example: $ALL_CAPS_HERE constants only (beware clashes with perl vars!) $Some_Caps_Here package-wide global/static $no_caps_here function scope my() or local() variables Function and method names seem to work best as all lowercase. E.g., C<$obj-E<gt>as_string()>. You can use a leading underscore to indicate that a variable or function should not be used outside the package that defined it. =item * If you have a really hairy regular expression, use the C</x> or C</xx> modifiers and put in some whitespace to make it look a little less like line noise. Don't use slash as a delimiter when your regexp has slashes or backslashes. =item * Use the new C<and> and C<or> operators to avoid having to parenthesize list operators so much, and to reduce the incidence of punctuation operators like C<&&> and C<||>. Call your subroutines as if they were functions or list operators to avoid excessive ampersands and parentheses. =item * Use here documents instead of repeated C<print()> statements. =item * Line up corresponding things vertically, especially if it'd be too long to fit on one line anyway. $IDX = $ST_MTIME; $IDX = $ST_ATIME if $opt_u; $IDX = $ST_CTIME if $opt_c; $IDX = $ST_SIZE if $opt_s; mkdir $tmpdir, 0700 or die "can't mkdir $tmpdir: $!"; chdir($tmpdir) or die "can't chdir $tmpdir: $!"; mkdir 'tmp', 0777 or die "can't mkdir $tmpdir/tmp: $!"; =item * Always check the return codes of system calls. Good error messages should go to C<STDERR>, include which program caused the problem, what the failed system call and arguments were, and (VERY IMPORTANT) should contain the standard system error message for what went wrong. Here's a simple but sufficient example: opendir(my $dh, $dir) or die "can't opendir $dir: $!"; =item * Line up your transliterations when it makes sense: tr [abc] [xyz]; =item * Think about reusability. Why waste brainpower on a one-shot when you might want to do something like it again? Consider generalizing your code. Consider writing a module or object class. Consider making your code run cleanly with C<use strict> and C<use warnings> in effect. Consider giving away your code. Consider changing your whole world view. Consider... oh, never mind. =item * Try to document your code and use Pod formatting in a consistent way. Here are commonly expected conventions: =over 4 =item * use C<CE<lt>E<gt>> for function, variable and module names (and more generally anything that can be considered part of code, like filehandles or specific values). Note that function names are considered more readable with parentheses after their name, that is C<function()>. =item * use C<BE<lt>E<gt>> for commands names like B<cat> or B<grep>. =item * use C<FE<lt>E<gt>> or C<CE<lt>E<gt>> for file names. C<FE<lt>E<gt>> should be the only Pod code for file names, but as most Pod formatters render it as italic, Unix and Windows paths with their slashes and backslashes may be less readable, and better rendered with C<CE<lt>E<gt>>. =back =item * Be consistent. =item * Be nice. =back perlmroapi.pod 0000644 00000006320 15125556335 0007435 0 ustar 00 =head1 NAME perlmroapi - Perl method resolution plugin interface =head1 DESCRIPTION As of Perl 5.10.1 there is a new interface for plugging and using method resolution orders other than the default (linear depth first search). The C3 method resolution order added in 5.10.0 has been re-implemented as a plugin, without changing its Perl-space interface. Each plugin should register itself by providing the following structure struct mro_alg { AV *(*resolve)(pTHX_ HV *stash, U32 level); const char *name; U16 length; U16 kflags; U32 hash; }; and calling C<Perl_mro_register>: Perl_mro_register(aTHX_ &my_mro_alg); =over 4 =item resolve Pointer to the linearisation function, described below. =item name Name of the MRO, either in ISO-8859-1 or UTF-8. =item length Length of the name. =item kflags If the name is given in UTF-8, set this to C<HVhek_UTF8>. The value is passed direct as the parameter I<kflags> to C<hv_common()>. =item hash A precomputed hash value for the MRO's name, or 0. =back =head1 Callbacks The C<resolve> function is called to generate a linearised ISA for the given stash, using this MRO. It is called with a pointer to the stash, and a I<level> of 0. The core always sets I<level> to 0 when it calls your function - the parameter is provided to allow your implementation to track depth if it needs to recurse. The function should return a reference to an array containing the parent classes in order. The names of the classes should be the result of calling C<HvENAME()> on the stash. In those cases where C<HvENAME()> returns null, C<HvNAME()> should be used instead. The caller is responsible for incrementing the reference count of the array returned if it wants to keep the structure. Hence, if you have created a temporary value that you keep no pointer to, C<sv_2mortal()> to ensure that it is disposed of correctly. If you have cached your return value, then return a pointer to it without changing the reference count. =head1 Caching Computing MROs can be expensive. The implementation provides a cache, in which you can store a single C<SV *>, or anything that can be cast to C<SV *>, such as C<AV *>. To read your private value, use the macro C<MRO_GET_PRIVATE_DATA()>, passing it the C<mro_meta> structure from the stash, and a pointer to your C<mro_alg> structure: meta = HvMROMETA(stash); private_sv = MRO_GET_PRIVATE_DATA(meta, &my_mro_alg); =for apidoc mro_get_private_data To set your private value, call C<Perl_mro_set_private_data()>: Perl_mro_set_private_data(aTHX_ meta, &c3_alg, private_sv); =for apidoc mro_set_private_data The private data cache will take ownership of a reference to private_sv, much the same way that C<hv_store()> takes ownership of a reference to the value that you pass it. =head1 Examples For examples of MRO implementations, see C<S_mro_get_linear_isa_c3()> and the C<BOOT:> section of F<ext/mro/mro.xs>, and C<S_mro_get_linear_isa_dfs()> in F<mro_core.c> =head1 AUTHORS The implementation of the C3 MRO and switchable MROs within the perl core was written by Brandon L Black. Nicholas Clark created the pluggable interface, refactored Brandon's implementation to work with it, and wrote this document. =cut perl5181delta.pod 0000644 00000014705 15125556335 0007564 0 ustar 00 =encoding utf8 =head1 NAME perl5181delta - what is new for perl v5.18.1 =head1 DESCRIPTION This document describes differences between the 5.18.0 release and the 5.18.1 release. If you are upgrading from an earlier release such as 5.16.0, first read L<perl5180delta>, which describes differences between 5.16.0 and 5.18.0. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.18.0 If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * B has been upgraded from 1.42 to 1.42_01, fixing bugs related to lexical subroutines. =item * Digest::SHA has been upgraded from 5.84 to 5.84_01, fixing a crashing bug. [RT #118649] =item * Module::CoreList has been upgraded from 2.89 to 2.96. =back =head1 Platform Support =head2 Platform-Specific Notes =over 4 =item AIX A rarely-encountered configuration bug in the AIX hints file has been corrected. =item MidnightBSD After a patch to the relevant hints file, perl should now build correctly on MidnightBSD 0.4-RELEASE. =back =head1 Selected Bug Fixes =over 4 =item * Starting in v5.18.0, a construct like C</[#](?{})/x> would have its C<#> incorrectly interpreted as a comment. The code block would be skipped, unparsed. This has been corrected. =item * A number of memory leaks related to the new, experimental regexp bracketed character class feature have been plugged. =item * The OP allocation code now returns correctly aligned memory in all cases for C<struct pmop>. Previously it could return memory only aligned to a 4-byte boundary, which is not correct for an ithreads build with 64 bit IVs on some 32 bit platforms. Notably, this caused the build to fail completely on sparc GNU/Linux. [RT #118055] =item * The debugger's C<man> command been fixed. It was broken in the v5.18.0 release. The C<man> command is aliased to the names C<doc> and C<perldoc> - all now work again. =item * C<@_> is now correctly visible in the debugger, fixing a regression introduced in v5.18.0's debugger. [RT #118169] =item * Fixed a small number of regexp constructions that could either fail to match or crash perl when the string being matched against was allocated above the 2GB line on 32-bit systems. [RT #118175] =item * Perl v5.16 inadvertently introduced a bug whereby calls to XSUBs that were not visible at compile time were treated as lvalues and could be assigned to, even when the subroutine was not an lvalue sub. This has been fixed. [perl #117947] =item * Perl v5.18 inadvertently introduced a bug whereby dual-vars (i.e. variables with both string and numeric values, such as C<$!> ) where the truthness of the variable was determined by the numeric value rather than the string value. [RT #118159] =item * Perl v5.18 inadvertently introduced a bug whereby interpolating mixed up- and down-graded UTF-8 strings in a regex could result in malformed UTF-8 in the pattern: specifically if a downgraded character in the range C<\x80..\xff> followed a UTF-8 string, e.g. utf8::upgrade( my $u = "\x{e5}"); utf8::downgrade(my $d = "\x{e5}"); /$u$d/ [perl #118297]. =item * Lexical constants (C<my sub a() { 42 }>) no longer crash when inlined. =item * Parameter prototypes attached to lexical subroutines are now respected when compiling sub calls without parentheses. Previously, the prototypes were honoured only for calls I<with> parentheses. [RT #116735] =item * Syntax errors in lexical subroutines in combination with calls to the same subroutines no longer cause crashes at compile time. =item * The dtrace sub-entry probe now works with lexical subs, instead of crashing [perl #118305]. =item * Undefining an inlinable lexical subroutine (C<my sub foo() { 42 } undef &foo>) would result in a crash if warnings were turned on. =item * Deep recursion warnings no longer crash lexical subroutines. [RT #118521] =back =head1 Acknowledgements Perl 5.18.1 represents approximately 2 months of development since Perl 5.18.0 and contains approximately 8,400 lines of changes across 60 files from 12 authors. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.18.1: Chris 'BinGOs' Williams, Craig A. Berry, Dagfinn Ilmari Mannsåker, David Mitchell, Father Chrysostomos, Karl Williamson, Lukas Mai, Nicholas Clark, Peter Martini, Ricardo Signes, Shlomi Fish, Tony Cook. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlbook.pod 0000644 00000020302 15125556335 0007074 0 ustar 00 =head1 NAME perlbook - Books about and related to Perl =head1 DESCRIPTION There are many books on Perl and Perl-related. A few of these are good, some are OK, but many aren't worth your money. There is a list of these books, some with extensive reviews, at L<https://www.perl.org/books/library.html> . We list some of the books here, and while listing a book implies our endorsement, don't think that not including a book means anything. Most of these books are available online through Safari Books Online ( L<http://safaribooksonline.com/> ). =head2 The most popular books The major reference book on Perl, written by the creator of Perl, is I<Programming Perl>: =over 4 =item I<Programming Perl> (the "Camel Book"): by Tom Christiansen, brian d foy, Larry Wall with Jon Orwant ISBN 978-0-596-00492-7 [4th edition February 2012] ISBN 978-1-4493-9890-3 [ebook] https://oreilly.com/catalog/9780596004927 =back The Ram is a cookbook with hundreds of examples of using Perl to accomplish specific tasks: =over 4 =item I<The Perl Cookbook> (the "Ram Book"): by Tom Christiansen and Nathan Torkington, with Foreword by Larry Wall ISBN 978-0-596-00313-5 [2nd Edition August 2003] ISBN 978-0-596-15888-0 [ebook] https://oreilly.com/catalog/9780596003135/ =back If you want to learn the basics of Perl, you might start with the Llama book, which assumes that you already know a little about programming: =over 4 =item I<Learning Perl> (the "Llama Book") by Randal L. Schwartz, Tom Phoenix, and brian d foy ISBN 978-1-4493-0358-7 [6th edition June 2011] ISBN 978-1-4493-0458-4 [ebook] https://www.learning-perl.com/ =back The tutorial started in the Llama continues in the Alpaca, which introduces the intermediate features of references, data structures, object-oriented programming, and modules: =over 4 =item I<Intermediate Perl> (the "Alpaca Book") by Randal L. Schwartz and brian d foy, with Tom Phoenix foreword by Damian Conway ISBN 978-1-4493-9309-0 [2nd edition August 2012] ISBN 978-1-4493-0459-1 [ebook] https://www.intermediateperl.com/ =back =head2 References You might want to keep these desktop references close by your keyboard: =over 4 =item I<Perl 5 Pocket Reference> by Johan Vromans ISBN 978-1-4493-0370-9 [5th edition July 2011] ISBN 978-1-4493-0813-1 [ebook] https://oreilly.com/catalog/0636920018476/ =item I<Perl Debugger Pocket Reference> by Richard Foley ISBN 978-0-596-00503-0 [1st edition January 2004] ISBN 978-0-596-55625-9 [ebook] https://oreilly.com/catalog/9780596005030/ =item I<Regular Expression Pocket Reference> by Tony Stubblebine ISBN 978-0-596-51427-3 [2nd edition July 2007] ISBN 978-0-596-55782-9 [ebook] https://oreilly.com/catalog/9780596514273/ =back =head2 Tutorials =over 4 =item I<Beginning Perl> (There are 2 books with this title) by Curtis 'Ovid' Poe ISBN 978-1-118-01384-7 http://www.wrox.com/WileyCDA/WroxTitle/productCd-1118013840.html by James Lee ISBN 1-59059-391-X [3rd edition April 2010 & ebook] https://www.apress.com/9781430227939 =item I<Learning Perl> (the "Llama Book") by Randal L. Schwartz, Tom Phoenix, and brian d foy ISBN 978-1-4493-0358-7 [6th edition June 2011] ISBN 978-1-4493-0458-4 [ebook] https://www.learning-perl.com/ =item I<Intermediate Perl> (the "Alpaca Book") by Randal L. Schwartz and brian d foy, with Tom Phoenix foreword by Damian Conway ISBN 978-1-4493-9309-0 [2nd edition August 2012] ISBN 978-1-4493-0459-1 [ebook] https://www.intermediateperl.com/ =item I<Mastering Perl> by brian d foy ISBN 9978-1-4493-9311-3 [2st edition January 2014] ISBN 978-1-4493-6487-8 [ebook] https://www.masteringperl.org/ =item I<Effective Perl Programming> by Joseph N. Hall, Joshua A. McAdams, brian d foy ISBN 0-321-49694-9 [2nd edition 2010] https://www.effectiveperlprogramming.com/ =back =head2 Task-Oriented =over 4 =item I<Writing Perl Modules for CPAN> by Sam Tregar ISBN 1-59059-018-X [1st edition August 2002 & ebook] https://www.apress.com/9781590590188 =item I<The Perl Cookbook> by Tom Christiansen and Nathan Torkington, with Foreword by Larry Wall ISBN 978-0-596-00313-5 [2nd Edition August 2003] ISBN 978-0-596-15888-0 [ebook] https://oreilly.com/catalog/9780596003135/ =item I<Automating System Administration with Perl> by David N. Blank-Edelman ISBN 978-0-596-00639-6 [2nd edition May 2009] ISBN 978-0-596-80251-6 [ebook] https://oreilly.com/catalog/9780596006396 =item I<Real World SQL Server Administration with Perl> by Linchi Shea ISBN 1-59059-097-X [1st edition July 2003 & ebook] https://www.apress.com/9781590590973 =back =head2 Special Topics =over 4 =item I<Regular Expressions Cookbook> by Jan Goyvaerts and Steven Levithan ISBN 978-1-4493-1943-4 [2nd edition August 2012] ISBN 978-1-4493-2747-7 [ebook] https://shop.oreilly.com/product/0636920023630.do =item I<Programming the Perl DBI> by Tim Bunce and Alligator Descartes ISBN 978-1-56592-699-8 [February 2000] ISBN 978-1-4493-8670-2 [ebook] https://oreilly.com/catalog/9781565926998 =item I<Perl Best Practices> by Damian Conway ISBN 978-0-596-00173-5 [1st edition July 2005] ISBN 978-0-596-15900-9 [ebook] https://oreilly.com/catalog/9780596001735 =item I<Higher-Order Perl> by Mark-Jason Dominus ISBN 1-55860-701-3 [1st edition March 2005] free ebook https://hop.perl.plover.com/book/ https://hop.perl.plover.com/ =item I<Mastering Regular Expressions> by Jeffrey E. F. Friedl ISBN 978-0-596-52812-6 [3rd edition August 2006] ISBN 978-0-596-55899-4 [ebook] https://oreilly.com/catalog/9780596528126 =item I<Network Programming with Perl> by Lincoln Stein ISBN 0-201-61571-1 [1st edition 2001] https://www.pearsonhighered.com/educator/product/Network-Programming-with-Perl/9780201615715.page =item I<Perl Template Toolkit> by Darren Chamberlain, Dave Cross, and Andy Wardley ISBN 978-0-596-00476-7 [December 2003] ISBN 978-1-4493-8647-4 [ebook] https://oreilly.com/catalog/9780596004767 =item I<Object Oriented Perl> by Damian Conway with foreword by Randal L. Schwartz ISBN 1-884777-79-1 [1st edition August 1999 & ebook] https://www.manning.com/conway/ =item I<Data Munging with Perl> by Dave Cross ISBN 1-930110-00-6 [1st edition 2001 & ebook] https://www.manning.com/cross =item I<Mastering Perl/Tk> by Steve Lidie and Nancy Walsh ISBN 978-1-56592-716-2 [1st edition January 2002] ISBN 978-0-596-10344-6 [ebook] https://oreilly.com/catalog/9781565927162 =item I<Extending and Embedding Perl> by Tim Jenness and Simon Cozens ISBN 1-930110-82-0 [1st edition August 2002 & ebook] https://www.manning.com/jenness =item I<Pro Perl Debugging> by Richard Foley with Andy Lester ISBN 1-59059-454-1 [1st edition July 2005 & ebook] https://www.apress.com/9781590594544 =back =head2 Free (as in beer) books Some of these books are available as free downloads. I<Higher-Order Perl>: L<https://hop.perl.plover.com/> I<Modern Perl>: L<http://onyxneon.com/books/modern_perl/> =head2 Other interesting, non-Perl books You might notice several familiar Perl concepts in this collection of ACM columns from Jon Bentley. The similarity to the title of the major Perl book (which came later) is not completely accidental: =over 4 =item I<Programming Pearls> by Jon Bentley ISBN 978-0-201-65788-3 [2 edition, October 1999] =item I<More Programming Pearls> by Jon Bentley ISBN 0-201-11889-0 [January 1988] =back =head2 A note on freshness Each version of Perl comes with the documentation that was current at the time of release. This poses a problem for content such as book lists. There are probably very nice books published after this list was included in your Perl release, and you can check the latest released version at L<https://perldoc.perl.org/perlbook.html> . Some of the books we've listed appear almost ancient in internet scale, but we've included those books because they still describe the current way of doing things. Not everything in Perl changes every day. Many of the beginner-level books, too, go over basic features and techniques that are still valid today. In general though, we try to limit this list to books published in the past five years. =head2 Get your book listed If your Perl book isn't listed and you think it should be, let us know. L<mailto:perl5-porters@perl.org> =cut perl5121delta.pod 0000644 00000023635 15125556335 0007560 0 ustar 00 =encoding utf8 =head1 NAME perl5121delta - what is new for perl v5.12.1 =head1 DESCRIPTION This document describes differences between the 5.12.0 release and the 5.12.1 release. If you are upgrading from an earlier release such as 5.10.1, first read L<perl5120delta>, which describes differences between 5.10.1 and 5.12.0. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.12.0. If any incompatibilities with 5.12.0 exist, they are bugs. Please report them. =head1 Core Enhancements Other than the bug fixes listed below, there should be no user-visible changes to the core language in this release. =head1 Modules and Pragmata =head2 Pragmata Changes =over =item * We fixed exporting of C<is_strict> and C<is_lax> from L<version>. These were being exported with a wrapper that treated them as method calls, which caused them to fail. They are just functions, are documented as such, and should never be subclassed, so this patch just exports them directly as functions without the wrapper. =back =head2 Updated Modules =over =item * We upgraded L<CGI.pm> to version 3.49 to incorporate fixes for regressions introduced in the release we shipped with Perl 5.12.0. =item * We upgraded L<Pod::Simple> to version 3.14 to get an improvement to \C\<\< \>\> parsing. =item * We made a small fix to the L<CPANPLUS> test suite to fix an occasional spurious test failure. =item * We upgraded L<Safe> to version 2.27 to wrap coderefs returned by C<reval()> and C<rdo()>. =back =head1 Changes to Existing Documentation =over =item * We added the new maintenance release policy to L<perlpolicy.pod> =item * We've clarified the multiple-angle-bracket construct in the spec for POD in L<perlpodspec> =item * We added a missing explanation for a warning about C<:=> to L<perldiag.pod> =item * We removed a false claim in L<perlunitut> that all text strings are Unicode strings in Perl. =item * We updated the GitHub mirror link in L<perlrepository> to mirrors/perl, not github/perl =item * We fixed a minor error in L<perl5114delta.pod>. =item * We replaced a mention of the now-obsolete L<Switch.pm> with F<given>/F<when>. =item * We improved documentation about F<$sitelibexp/sitecustomize.pl> in L<perlrun>. =item * We corrected L<perlmodlib.pod> which had unintentionally omitted a number of modules. =item * We updated the documentation for 'require' in L<perlfunc.pod> relating to putting Perl code in @INC. =item * We reinstated some erroneously-removed documentation about quotemeta in L<perlfunc>. =item * We fixed an F<a2p> example in L<perlutil.pod>. =item * We filled in a blank in L<perlport.pod> with the release date of Perl 5.12. =item * We fixed broken links in a number of perldelta files. =item * The documentation for L<Carp.pm> incorrectly stated that the $Carp::Verbose variable makes cluck generate stack backtraces. =item * We fixed a number of typos in L<Pod::Functions> =item * We improved documentation of case-changing functions in L<perlfunc.pod> =item * We corrected L<perlgpl.pod> to contain the correct version of the GNU General Public License. =back =head1 Testing =head2 Testing Improvements =over =item * F<t/op/sselect.t> is now less prone to clock jitter during timing checks on Windows. sleep() time on Win32 may be rounded down to multiple of the clock tick interval. =item * F<lib/blib.t> and F<lib/locale.t>: Fixes for test failures on Darwin/PPC =item * F<perl5db.t>: Fix for test failures when C<Term::ReadLine::Gnu> is installed. =back =head1 Installation and Configuration Improvements =head2 Configuration improvements =over =item * We updated F<INSTALL> with notes about how to deal with broken F<dbm.h> on OpenSUSE (and possibly other platforms) =back =head1 Bug Fixes =over 4 =item * A bug in how we process filetest operations could cause a segfault. Filetests don't always expect an op on the stack, so we now use TOPs only if we're sure that we're not stat'ing the _ filehandle. This is indicated by OPf_KIDS (as checked in ck_ftst). See also: L<http://rt.perl.org/rt3/Public/Bug/Display.html?id=74542> =item * When deparsing a nextstate op that has both a change of package (relative to the previous nextstate) and a label, the package declaration is now emitted first, because it is syntactically impermissible for a label to prefix a package declaration. =item * XSUB.h now correctly redefines fgets under PERL_IMPLICIT_SYS See also: L<http://rt.cpan.org/Public/Bug/Display.html?id=55049> =item * utf8::is_utf8 now respects GMAGIC (e.g. $1) =item * XS code using C<fputc()> or C<fputs()>: on Windows could cause an error due to their arguments being swapped. See also: L<http://rt.perl.org/rt3/Public/Bug/Display.html?id=72704> =item * We fixed a small bug in lex_stuff_pvn() that caused spurious syntax errors in an obscure situation. It happened when stuffing was performed on the last line of a file and the line ended with a statement that lacked a terminating semicolon. See also: L<http://rt.perl.org/rt3/Public/Bug/Display.html?id=74006> =item * We fixed a bug that could cause \N{} constructs followed by a single . to be parsed incorrectly. See also: L<http://rt.perl.org/rt3/Public/Bug/Display.html?id=74978> =item * We fixed a bug that caused when(scalar) without an argument not to be treated as a syntax error. See also: L<http://rt.perl.org/rt3/Public/Bug/Display.html?id=74114> =item * We fixed a regression in the handling of labels immediately before string evals that was introduced in Perl 5.12.0. See also: L<http://rt.perl.org/rt3/Public/Bug/Display.html?id=74290> =item * We fixed a regression in case-insensitive matching of folded characters in regular expressions introduced in Perl 5.10.1. See also: L<http://rt.perl.org/rt3/Public/Bug/Display.html?id=72998> =back =head1 Platform Specific Notes =head2 HP-UX =over =item * Perl now allows -Duse64bitint without promoting to use64bitall on HP-UX =back =head2 AIX =over =item * Perl now builds on AIX 4.2 The changes required work around AIX 4.2s' lack of support for IPv6, and limited support for POSIX C<sigaction()>. =back =head2 FreeBSD 7 =over =item * FreeBSD 7 no longer contains F</usr/bin/objformat>. At build time, Perl now skips the F<objformat> check for versions 7 and higher and assumes ELF. =back =head2 VMS =over =item * It's now possible to build extensions on older (pre 7.3-2) VMS systems. DCL symbol length was limited to 1K up until about seven years or so ago, but there was no particularly deep reason to prevent those older systems from configuring and building Perl. =item * We fixed the previously-broken C<-Uuseperlio> build on VMS. We were checking a variable that doesn't exist in the non-default case of disabling perlio. Now we only look at it when it exists. =item * We fixed the -Uuseperlio command-line option in configure.com. Formerly it only worked if you went through all the questions interactively and explicitly answered no. =back =head1 Known Problems =over =item * C<List::Util::first> misbehaves in the presence of a lexical C<$_> (typically introduced by C<my $_> or implicitly by C<given>). The variable which gets set for each iteration is the package variable C<$_>, not the lexical C<$_>. A similar issue may occur in other modules that provide functions which take a block as their first argument, like foo { ... $_ ...} list See also: L<http://rt.perl.org/rt3/Public/Bug/Display.html?id=67694> =item * C<Module::Load::Conditional> and C<version> have an unfortunate interaction which can cause C<CPANPLUS> to crash when it encounters an unparseable version string. Upgrading to C<CPANPLUS> 0.9004 or C<Module::Load::Conditional> 0.38 from CPAN will resolve this issue. =back =head1 Acknowledgements Perl 5.12.1 represents approximately four weeks of development since Perl 5.12.0 and contains approximately 4,000 lines of changes across 142 files from 28 authors. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.12.1: Ævar Arnfjörð Bjarmason, Chris Williams, chromatic, Craig A. Berry, David Golden, Father Chrysostomos, Florian Ragwitz, Frank Wiegand, Gene Sullivan, Goro Fuji, H.Merijn Brand, James E Keenan, Jan Dubois, Jesse Vincent, Josh ben Jore, Karl Williamson, Leon Brocard, Michael Schwern, Nga Tang Chan, Nicholas Clark, Niko Tyni, Philippe Bruhat, Rafael Garcia-Suarez, Ricardo Signes, Steffen Mueller, Todd Rinaldo, Vincent Pit and Zefram. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl5281delta.pod 0000644 00000011037 15125556335 0007560 0 ustar 00 =encoding utf8 =head1 NAME perl5281delta - what is new for perl v5.28.1 =head1 DESCRIPTION This document describes differences between the 5.28.0 release and the 5.28.1 release. If you are upgrading from an earlier release such as 5.26.0, first read L<perl5280delta>, which describes differences between 5.26.0 and 5.28.0. =head1 Security =head2 [CVE-2018-18311] Integer overflow leading to buffer overflow and segmentation fault Integer arithmetic in C<Perl_my_setenv()> could wrap when the combined length of the environment variable name and value exceeded around 0x7fffffff. This could lead to writing beyond the end of an allocated buffer with attacker supplied data. L<[perl #133204]|https://rt.perl.org/Ticket/Display.html?id=133204> =head2 [CVE-2018-18312] Heap-buffer-overflow write in S_regatom (regcomp.c) A crafted regular expression could cause heap-buffer-overflow write during compilation, potentially allowing arbitrary code execution. L<[perl #133423]|https://rt.perl.org/Ticket/Display.html?id=133423> =head1 Incompatible Changes There are no changes intentionally incompatible with 5.28.0. If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Module::CoreList> has been upgraded from version 5.20180622 to 5.20181129_28. =back =head1 Selected Bug Fixes =over 4 =item * Perl 5.28 introduced an C<index()> optimization when comparing to -1 (or indirectly, e.g. >= 0). When this optimization was triggered inside a C<when> clause it caused a warning ("Argument %s isn't numeric in smart match"). This has now been fixed. L<[perl #133368]|https://rt.perl.org/Ticket/Display.html?id=133368> =item * Matching of decimal digits in script runs, introduced in Perl 5.28, had a bug that led to C<"1\N{THAI DIGIT FIVE}"> matching C</^(*sr:\d+)$/> when it should not. This has now been fixed. =item * The new in-place editing code no longer leaks directory handles. L<[perl #133314]|https://rt.perl.org/Ticket/Display.html?id=133314> =back =head1 Acknowledgements Perl 5.28.1 represents approximately 5 months of development since Perl 5.28.0 and contains approximately 6,100 lines of changes across 44 files from 12 authors. Excluding auto-generated files, documentation and release tools, there were approximately 700 lines of changes to 12 .pm, .t, .c and .h files. Perl continues to flourish into its fourth decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.28.1: Aaron Crane, Abigail, Chris 'BinGOs' Williams, Dagfinn Ilmari Mannsåker, David Mitchell, James E Keenan, John SJ Anderson, Karen Etheridge, Karl Williamson, Sawyer X, Steve Hay, Tony Cook. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the perl bug database at L<https://rt.perl.org/> . There may also be information at L<http://www.perl.org/> , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications which make it inappropriate to send to a publicly archived mailing list, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 Give Thanks If you wish to thank the Perl 5 Porters for the work we had done in Perl 5, you can do so by running the C<perlthanks> program: perlthanks This will send an email to the Perl 5 Porters list with your show of thanks. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlexperiment.pod 0000644 00000016102 15125556335 0010325 0 ustar 00 =head1 NAME perlexperiment - A listing of experimental features in Perl =head1 DESCRIPTION This document lists the current and past experimental features in the perl core. Although all of these are documented with their appropriate topics, this succinct listing gives you an overview and basic facts about their status. So far we've merely tried to find and list the experimental features and infer their inception, versions, etc. There's a lot of speculation here. =head2 Current experiments =over 8 =item Smart match (C<~~>) Introduced in Perl 5.10.0 Modified in Perl 5.10.1, 5.12.0 Using this feature triggers warnings in the category C<experimental::smartmatch>. The ticket for this feature is L<[perl #13173]|https://github.com/Perl/perl5/issues/13173>. =item Pluggable keywords The ticket for this feature is L<[perl #13199]|https://github.com/Perl/perl5/issues/13199>. See L<perlapi/PL_keyword_plugin> for the mechanism. Introduced in Perl 5.11.2 =item Regular Expression Set Operations Introduced in Perl 5.18 The ticket for this feature is L<[perl #13197]|https://github.com/Perl/perl5/issues/13197>. See also: L<perlrecharclass/Extended Bracketed Character Classes> Using this feature triggers warnings in the category C<experimental::regex_sets>. =item Subroutine signatures Introduced in Perl 5.20.0 Using this feature triggers warnings in the category C<experimental::signatures>. The ticket for this feature is L<[perl #13681]|https://github.com/Perl/perl5/issues/13681>. =item Aliasing via reference Introduced in Perl 5.22.0 Using this feature triggers warnings in the category C<experimental::refaliasing>. The ticket for this feature is L<[perl #14150]|https://github.com/Perl/perl5/issues/14150>. See also: L<perlref/Assigning to References> =item The "const" attribute Introduced in Perl 5.22.0 Using this feature triggers warnings in the category C<experimental::const_attr>. The ticket for this feature is L<[perl #14428]|https://github.com/Perl/perl5/issues/14428>. See also: L<perlsub/Constant Functions> =item use re 'strict'; Introduced in Perl 5.22.0 Using this feature triggers warnings in the category C<experimental::re_strict>. See L<re/'strict' mode> =item The <:win32> IO pseudolayer The ticket for this feature is L<[perl #13198]|https://github.com/Perl/perl5/issues/13198>. See also L<perlrun/PERLIO> =item Declaring a reference to a variable Introduced in Perl 5.26.0 Using this feature triggers warnings in the category C<experimental::declared_refs>. The ticket for this feature is L<[perl #15458]|https://github.com/Perl/perl5/issues/15458>. See also: L<perlref/Declaring a Reference to a Variable> =item There is an C<installhtml> target in the Makefile. The ticket for this feature is L<[perl #12726]|https://github.com/Perl/perl5/issues/12726>. =item (Limited) Variable-length look-behind Introduced in Perl 5.30.0. Variability of up to 255 characters is handled. Using this feature triggers warnings in the category C<experimental::vlb>. See also: L<perlre/(*positive_lookbehind:I<pattern>)> and L<perlre/(*negative_lookbehind:I<pattern>)> =back =head2 Accepted features These features were so wildly successful and played so well with others that we decided to remove their experimental status and admit them as full, stable features in the world of Perl, lavishing all the benefits and luxuries thereof. They are also awarded +5 Stability and +3 Charisma. =over 8 =item 64-bit support Introduced in Perl 5.005 =item die accepts a reference Introduced in Perl 5.005 =item DB module Introduced in Perl 5.6.0 See also L<perldebug>, L<perldebtut> =item Weak references Introduced in Perl 5.6.0 =item Internal file glob Introduced in Perl 5.6.0 =item fork() emulation Introduced in Perl 5.6.1 See also L<perlfork> =item -Dusemultiplicity -Duseithreads Introduced in Perl 5.6.0 Accepted in Perl 5.8.0 =item Support for long doubles Introduced in Perl 5.6.0 Accepted in Perl 5.8.1 =item The C<\N> regex character class The C<\N> character class, not to be confused with the named character sequence C<\N{NAME}>, denotes any non-newline character in a regular expression. Introduced in Perl 5.12 Exact version of acceptance unclear, but no later than Perl 5.18. =item C<(?{code})> and C<(??{ code })> Introduced in Perl 5.6.0 Accepted in Perl 5.20.0 See also L<perlre> =item Linux abstract Unix domain sockets Introduced in Perl 5.9.2 Accepted before Perl 5.20.0. The Socket library is now primarily maintained on CPAN, rather than in the perl core. See also L<Socket> =item Lvalue subroutines Introduced in Perl 5.6.0 Accepted in Perl 5.20.0 See also L<perlsub> =item Backtracking control verbs C<(*ACCEPT)> Introduced in Perl 5.10 Accepted in Perl 5.20.0 =item The <:pop> IO pseudolayer See also L<perlrun/PERLIO> Accepted in Perl 5.20.0 =item C<\s> in regexp matches vertical tab Accepted in Perl 5.22.0 =item Postfix dereference syntax Introduced in Perl 5.20.0 Accepted in Perl 5.24.0 =item Lexical subroutines Introduced in Perl 5.18.0 Accepted in Perl 5.26.0 =item String- and number-specific bitwise operators Introduced in Perl 5.22.0 Accepted in Perl 5.28.0 =item Alphabetic assertions Introduced in Perl 5.28.0 Accepted in Perl 5.32.0 =item Script runs Introduced in Perl 5.28.0 Accepted in Perl 5.32.0 =back =head2 Removed features These features are no longer considered experimental and their functionality has disappeared. It's your own fault if you wrote production programs using these features after we explicitly told you not to (see L<perlpolicy>). =over 8 =item 5.005-style threading Introduced in Perl 5.005 Removed in Perl 5.10 =item perlcc Introduced in Perl 5.005 Moved from Perl 5.9.0 to CPAN =item The pseudo-hash data type Introduced in Perl 5.6.0 Removed in Perl 5.9.0 =item GetOpt::Long Options can now take multiple values at once (experimental) C<Getopt::Long> upgraded to version 2.35 Removed in Perl 5.8.8 =item Assertions The C<-A> command line switch Introduced in Perl 5.9.0 Removed in Perl 5.9.5 =item Test::Harness::Straps Moved from Perl 5.10.1 to CPAN =item C<legacy> The experimental C<legacy> pragma was swallowed by the C<feature> pragma. Introduced in Perl 5.11.2 Removed in Perl 5.11.3 =item Lexical C<$_> Using this feature triggered warnings in the category C<experimental::lexical_topic>. Introduced in Perl 5.10.0 Removed in Perl 5.24.0 =item Array and hash container functions accept references Using this feature triggered warnings in the category C<experimental::autoderef>. Superseded by L</Postfix dereference syntax>. Introduced in Perl 5.14.0 Removed in Perl 5.24.0 =item C<our> can have an experimental optional attribute C<unique> Introduced in Perl 5.8.0 Deprecated in Perl 5.10.0 Removed in Perl 5.28.0 =back =head1 SEE ALSO For a complete list of features check L<feature>. =head1 AUTHORS brian d foy C<< <brian.d.foy@gmail.com> >> SE<eacute>bastien Aperghis-Tramoni C<< <saper@cpan.org> >> =head1 COPYRIGHT Copyright 2010, brian d foy C<< <brian.d.foy@gmail.com> >> =head1 LICENSE You can use and redistribute this document under the same terms as Perl itself. =cut perl5163delta.pod 0000644 00000007765 15125556335 0007574 0 ustar 00 =encoding utf8 =head1 NAME perl5163delta - what is new for perl v5.16.3 =head1 DESCRIPTION This document describes differences between the 5.16.2 release and the 5.16.3 release. If you are upgrading from an earlier release such as 5.16.1, first read L<perl5162delta>, which describes differences between 5.16.1 and 5.16.2. =head1 Core Enhancements No changes since 5.16.0. =head1 Security This release contains one major and a number of minor security fixes. These latter are included mainly to allow the test suite to pass cleanly with the clang compiler's address sanitizer facility. =head2 CVE-2013-1667: memory exhaustion with arbitrary hash keys With a carefully crafted set of hash keys (for example arguments on a URL), it is possible to cause a hash to consume a large amount of memory and CPU, and thus possibly to achieve a Denial-of-Service. This problem has been fixed. =head2 wrap-around with IO on long strings Reading or writing strings greater than 2**31 bytes in size could segfault due to integer wraparound. This problem has been fixed. =head2 memory leak in Encode The UTF-8 encoding implementation in Encode.xs had a memory leak which has been fixed. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.16.0. If any exist, they are bugs and reports are welcome. =head1 Deprecations There have been no deprecations since 5.16.0. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Encode> has been upgraded from version 2.44 to version 2.44_01. =item * L<Module::CoreList> has been upgraded from version 2.76 to version 2.76_02. =item * L<XS::APItest> has been upgraded from version 0.38 to version 0.39. =back =head1 Known Problems None. =head1 Acknowledgements Perl 5.16.3 represents approximately 4 months of development since Perl 5.16.2 and contains approximately 870 lines of changes across 39 files from 7 authors. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.16.3: Andy Dougherty, Chris 'BinGOs' Williams, Dave Rolsky, David Mitchell, Michael Schroeder, Ricardo Signes, Yves Orton. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl5260delta.pod 0000644 00000306713 15125556335 0007565 0 ustar 00 =encoding utf8 =head1 NAME perl5260delta - what is new for perl v5.26.0 =head1 DESCRIPTION This document describes the differences between the 5.24.0 release and the 5.26.0 release. =head1 Notice This release includes three updates with widespread effects: =over 4 =item * C<"."> no longer in C<@INC> For security reasons, the current directory (C<".">) is no longer included by default at the end of the module search path (C<@INC>). This may have widespread implications for the building, testing and installing of modules, and for the execution of scripts. See the section L<< Removal of the current directory (C<".">) from C<@INC> >> for the full details. =item * C<do> may now warn C<do> now gives a deprecation warning when it fails to load a file which it would have loaded had C<"."> been in C<@INC>. =item * In regular expression patterns, a literal left brace C<"{"> should be escaped See L</Unescaped literal C<"{"> characters in regular expression patterns are no longer permissible>. =back =head1 Core Enhancements =head2 Lexical subroutines are no longer experimental Using the C<lexical_subs> feature introduced in v5.18 no longer emits a warning. Existing code that disables the C<experimental::lexical_subs> warning category that the feature previously used will continue to work. The C<lexical_subs> feature has no effect; all Perl code can use lexical subroutines, regardless of what feature declarations are in scope. =head2 Indented Here-documents This adds a new modifier C<"~"> to here-docs that tells the parser that it should look for C</^\s*$DELIM\n/> as the closing delimiter. These syntaxes are all supported: <<~EOF; <<~\EOF; <<~'EOF'; <<~"EOF"; <<~`EOF`; <<~ 'EOF'; <<~ "EOF"; <<~ `EOF`; The C<"~"> modifier will strip, from each line in the here-doc, the same whitespace that appears before the delimiter. Newlines will be copied as-is, and lines that don't include the proper beginning whitespace will cause perl to croak. For example: if (1) { print <<~EOF; Hello there EOF } prints "Hello there\n" with no leading whitespace. =head2 New regular expression modifier C</xx> Specifying two C<"x"> characters to modify a regular expression pattern does everything that a single one does, but additionally TAB and SPACE characters within a bracketed character class are generally ignored and can be added to improve readability, like S<C</[ ^ A-Z d-f p-x ]/xx>>. Details are at L<perlre/E<sol>x and E<sol>xx>. =head2 C<@{^CAPTURE}>, C<%{^CAPTURE}>, and C<%{^CAPTURE_ALL}> C<@{^CAPTURE}> exposes the capture buffers of the last match as an array. So C<$1> is C<${^CAPTURE}[0]>. This is a more efficient equivalent to code like C<substr($matched_string,$-[0],$+[0]-$-[0])>, and you don't have to keep track of the C<$matched_string> either. This variable has no single character equivalent. Note that, like the other regex magic variables, the contents of this variable is dynamic; if you wish to store it beyond the lifetime of the match you must copy it to another array. C<%{^CAPTURE}> is equivalent to C<%+> (I<i.e.>, named captures). Other than being more self-documenting there is no difference between the two forms. C<%{^CAPTURE_ALL}> is equivalent to C<%-> (I<i.e.>, all named captures). Other than being more self-documenting there is no difference between the two forms. =head2 Declaring a reference to a variable As an experimental feature, Perl now allows the referencing operator to come after L<C<my()>|perlfunc/my>, L<C<state()>|perlfunc/state>, L<C<our()>|perlfunc/our>, or L<C<local()>|perlfunc/local>. This syntax must be enabled with C<use feature 'declared_refs'>. It is experimental, and will warn by default unless C<no warnings 'experimental::refaliasing'> is in effect. It is intended mainly for use in assignments to references. For example: use experimental 'refaliasing', 'declared_refs'; my \$a = \$b; See L<perlref/Assigning to References> for more details. =head2 Unicode 9.0 is now supported A list of changes is at L<http://www.unicode.org/versions/Unicode9.0.0/>. Modules that are shipped with core Perl but not maintained by p5p do not necessarily support Unicode 9.0. L<Unicode::Normalize> does work on 9.0. =head2 Use of C<\p{I<script>}> uses the improved Script_Extensions property Unicode 6.0 introduced an improved form of the Script (C<sc>) property, and called it Script_Extensions (C<scx>). Perl now uses this improved version when a property is specified as just C<\p{I<script>}>. This should make programs more accurate when determining if a character is used in a given script, but there is a slight chance of breakage for programs that very specifically needed the old behavior. The meaning of compound forms, like C<\p{sc=I<script>}> are unchanged. See L<perlunicode/Scripts>. =head2 Perl can now do default collation in UTF-8 locales on platforms that support it Some platforms natively do a reasonable job of collating and sorting in UTF-8 locales. Perl now works with those. For portability and full control, L<Unicode::Collate> is still recommended, but now you may not need to do anything special to get good-enough results, depending on your application. See L<perllocale/Category C<LC_COLLATE>: Collation: Text Comparisons and Sorting>. =head2 Better locale collation of strings containing embedded C<NUL> characters In locales that have multi-level character weights, C<NUL>s are now ignored at the higher priority ones. There are still some gotchas in some strings, though. See L<perllocale/Collation of strings containing embedded C<NUL> characters>. =head2 C<CORE> subroutines for hash and array functions callable via reference The hash and array functions in the C<CORE> namespace (C<keys>, C<each>, C<values>, C<push>, C<pop>, C<shift>, C<unshift> and C<splice>) can now be called with ampersand syntax (C<&CORE::keys(\%hash>) and via reference (C<< my $k = \&CORE::keys; $k-E<gt>(\%hash) >>). Previously they could only be used when inlined. =head2 New Hash Function For 64-bit Builds We have switched to a hybrid hash function to better balance performance for short and long keys. For short keys, 16 bytes and under, we use an optimised variant of One At A Time Hard, and for longer keys we use Siphash 1-3. For very long keys this is a big improvement in performance. For shorter keys there is a modest improvement. =head1 Security =head2 Removal of the current directory (C<".">) from C<@INC> The perl binary includes a default set of paths in C<@INC>. Historically it has also included the current directory (C<".">) as the final entry, unless run with taint mode enabled (C<perl -T>). While convenient, this has security implications: for example, where a script attempts to load an optional module when its current directory is untrusted (such as F</tmp>), it could load and execute code from under that directory. Starting with v5.26, C<"."> is always removed by default, not just under tainting. This has major implications for installing modules and executing scripts. The following new features have been added to help ameliorate these issues. =over =item * F<Configure -Udefault_inc_excludes_dot> There is a new F<Configure> option, C<default_inc_excludes_dot> (enabled by default) which builds a perl executable without C<".">; unsetting this option using C<-U> reverts perl to the old behaviour. This may fix your path issues but will reintroduce all the security concerns, so don't build a perl executable like this unless you're I<really> confident that such issues are not a concern in your environment. =item * C<PERL_USE_UNSAFE_INC> There is a new environment variable recognised by the perl interpreter. If this variable has the value 1 when the perl interpreter starts up, then C<"."> will be automatically appended to C<@INC> (except under tainting). This allows you restore the old perl interpreter behaviour on a case-by-case basis. But note that this is intended to be a temporary crutch, and this feature will likely be removed in some future perl version. It is currently set by the C<cpan> utility and C<Test::Harness> to ease installation of CPAN modules which have not been updated to handle the lack of dot. Once again, don't use this unless you are sure that this will not reintroduce any security concerns. =item * A new deprecation warning issued by C<do>. While it is well-known that C<use> and C<require> use C<@INC> to search for the file to load, many people don't realise that C<do "file"> also searches C<@INC> if the file is a relative path. With the removal of C<".">, a simple C<do "file.pl"> will fail to read in and execute C<file.pl> from the current directory. Since this is commonly expected behaviour, a new deprecation warning is now issued whenever C<do> fails to load a file which it otherwise would have found if a dot had been in C<@INC>. =back Here are some things script and module authors may need to do to make their software work in the new regime. =over =item * Script authors If the issue is within your own code (rather than within included modules), then you have two main options. Firstly, if you are confident that your script will only be run within a trusted directory (under which you expect to find trusted files and modules), then add C<"."> back into the path; I<e.g.>: BEGIN { my $dir = "/some/trusted/directory"; chdir $dir or die "Can't chdir to $dir: $!\n"; # safe now push @INC, '.'; } use "Foo::Bar"; # may load /some/trusted/directory/Foo/Bar.pm do "config.pl"; # may load /some/trusted/directory/config.pl On the other hand, if your script is intended to be run from within untrusted directories (such as F</tmp>), then your script suddenly failing to load files may be indicative of a security issue. You most likely want to replace any relative paths with full paths; for example, do "foo_config.pl" might become do "$ENV{HOME}/foo_config.pl" If you are absolutely certain that you want your script to load and execute a file from the current directory, then use a C<./> prefix; for example: do "./foo_config.pl" =item * Installing and using CPAN modules If you install a CPAN module using an automatic tool like C<cpan>, then this tool will itself set the C<PERL_USE_UNSAFE_INC> environment variable while building and testing the module, which may be sufficient to install a distribution which hasn't been updated to be dot-aware. If you want to install such a module manually, then you'll need to replace the traditional invocation: perl Makefile.PL && make && make test && make install with something like (export PERL_USE_UNSAFE_INC=1; \ perl Makefile.PL && make && make test && make install) Note that this only helps build and install an unfixed module. It's possible for the tests to pass (since they were run under C<PERL_USE_UNSAFE_INC=1>), but for the module itself to fail to perform correctly in production. In this case, you may have to temporarily modify your script until a fixed version of the module is released. For example: use Foo::Bar; { local @INC = (@INC, '.'); # assuming read_config() needs '.' in @INC $config = Foo::Bar->read_config(); } This is only rarely expected to be necessary. Again, if doing this, assess the resultant risks first. =item * Module Authors If you maintain a CPAN distribution, it may need updating to run in a dotless environment. Although C<cpan> and other such tools will currently set the C<PERL_USE_UNSAFE_INC> during module build, this is a temporary workaround for the set of modules which rely on C<"."> being in C<@INC> for installation and testing, and this may mask deeper issues. It could result in a module which passes tests and installs, but which fails at run time. During build, test, and install, it will normally be the case that any perl processes will be executing directly within the root directory of the untarred distribution, or a known subdirectory of that, such as F<t/>. It may well be that F<Makefile.PL> or F<t/foo.t> will attempt to include local modules and configuration files using their direct relative filenames, which will now fail. However, as described above, automatic tools like F<cpan> will (for now) set the C<PERL_USE_UNSAFE_INC> environment variable, which introduces dot during a build. This makes it likely that your existing build and test code will work, but this may mask issues with your code which only manifest when used after install. It is prudent to try and run your build process with that variable explicitly disabled: (export PERL_USE_UNSAFE_INC=0; \ perl Makefile.PL && make && make test && make install) This is more likely to show up any potential problems with your module's build process, or even with the module itself. Fixing such issues will ensure both that your module can again be installed manually, and that it will still build once the C<PERL_USE_UNSAFE_INC> crutch goes away. When fixing issues in tests due to the removal of dot from C<@INC>, reinsertion of dot into C<@INC> should be performed with caution, for this too may suppress real errors in your runtime code. You are encouraged wherever possible to apply the aforementioned approaches with explicit absolute/relative paths, or to relocate your needed files into a subdirectory and insert that subdirectory into C<@INC> instead. If your runtime code has problems under the dotless C<@INC>, then the comments above on how to fix for script authors will mostly apply here too. Bear in mind though that it is considered bad form for a module to globally add a dot to C<@INC>, since it introduces both a security risk and hides issues of accidentally requiring dot in C<@INC>, as explained above. =back =head2 Escaped colons and relative paths in PATH On Unix systems, Perl treats any relative paths in the C<PATH> environment variable as tainted when starting a new process. Previously, it was allowing a backslash to escape a colon (unlike the OS), consequently allowing relative paths to be considered safe if the PATH was set to something like C</\:.>. The check has been fixed to treat C<"."> as tainted in that example. =head2 New C<-Di> switch is now required for PerlIO debugging output This is used for debugging of code within PerlIO to avoid recursive calls. Previously this output would be sent to the file specified by the C<PERLIO_DEBUG> environment variable if perl wasn't running setuid and the C<-T> or C<-t> switches hadn't been parsed yet. If perl performed output at a point where it hadn't yet parsed its switches this could result in perl creating or overwriting the file named by C<PERLIO_DEBUG> even when the C<-T> switch had been supplied. Perl now requires the C<-Di> switch to be present before it will produce PerlIO debugging output. By default this is written to C<stderr>, but can optionally be redirected to a file by setting the C<PERLIO_DEBUG> environment variable. If perl is running setuid or the C<-T> switch was supplied, C<PERLIO_DEBUG> is ignored and the debugging output is sent to C<stderr> as for any other C<-D> switch. =head1 Incompatible Changes =head2 Unescaped literal C<"{"> characters in regular expression patterns are no longer permissible You have to now say something like C<"\{"> or C<"[{]"> to specify to match a LEFT CURLY BRACKET; otherwise, it is a fatal pattern compilation error. This change will allow future extensions to the language. These have been deprecated since v5.16, with a deprecation message raised for some uses starting in v5.22. Unfortunately, the code added to raise the message was buggy and failed to warn in some cases where it should have. Therefore, enforcement of this ban for these cases is deferred until Perl 5.30, but the code has been fixed to raise a default-on deprecation message for them in the meantime. Some uses of literal C<"{"> occur in contexts where we do not foresee the meaning ever being anything but the literal, such as the very first character in the pattern, or after a C<"|"> meaning alternation. Thus qr/{fee|{fie/ matches either of the strings C<{fee> or C<{fie>. To avoid forcing unnecessary code changes, these uses do not need to be escaped, and no warning is raised about them, and there are no current plans to change this. But it is always correct to escape C<"{">, and the simple rule to remember is to always do so. See L<Unescaped left brace in regex is illegal here|perldiag/Unescaped left brace in regex is illegal here in regex; marked by S<E<lt>-- HERE> in mE<sol>%sE<sol>>. =head2 C<scalar(%hash)> return signature changed The value returned for C<scalar(%hash)> will no longer show information about the buckets allocated in the hash. It will simply return the count of used keys. It is thus equivalent to C<0+keys(%hash)>. A form of backward compatibility is provided via L<C<Hash::Util::bucket_ratio()>|Hash::Util/bucket_ratio> which provides the same behavior as C<scalar(%hash)> provided in Perl 5.24 and earlier. =head2 C<keys> returned from an lvalue subroutine C<keys> returned from an lvalue subroutine can no longer be assigned to in list context. sub foo : lvalue { keys(%INC) } (foo) = 3; # death sub bar : lvalue { keys(@_) } (bar) = 3; # also an error This makes the lvalue sub case consistent with C<(keys %hash) = ...> and C<(keys @_) = ...>, which are also errors. L<[perl #128187]|https://rt.perl.org/Public/Bug/Display.html?id=128187> =head2 The C<${^ENCODING}> facility has been removed The special behaviour associated with assigning a value to this variable has been removed. As a consequence, the L<encoding> pragma's default mode is no longer supported. If you still need to write your source code in encodings other than UTF-8, use a source filter such as L<Filter::Encoding> on CPAN or L<encoding>'s C<Filter> option. =head2 C<POSIX::tmpnam()> has been removed The fundamentally unsafe C<tmpnam()> interface was deprecated in Perl 5.22 and has now been removed. In its place, you can use, for example, the L<File::Temp> interfaces. =head2 require ::Foo::Bar is now illegal. Formerly, C<require ::Foo::Bar> would try to read F</Foo/Bar.pm>. Now any bareword require which starts with a double colon dies instead. =head2 Literal control character variable names are no longer permissible A variable name may no longer contain a literal control character under any circumstances. These previously were allowed in single-character names on ASCII platforms, but have been deprecated there since Perl 5.20. This affects things like C<$I<\cT>>, where I<\cT> is a literal control (such as a C<NAK> or C<NEGATIVE ACKNOWLEDGE> character) in the source code. =head2 C<NBSP> is no longer permissible in C<\N{...}> The name of a character may no longer contain non-breaking spaces. It has been deprecated to do so since Perl 5.22. =head1 Deprecations =head2 String delimiters that aren't stand-alone graphemes are now deprecated For Perl to eventually allow string delimiters to be Unicode grapheme clusters (which look like a single character, but may be a sequence of several ones), we have to stop allowing a single character delimiter that isn't a grapheme by itself. These are unlikely to exist in actual code, as they would typically display as attached to the character in front of them. =head2 C<\cI<X>> that maps to a printable is no longer deprecated This means we have no plans to remove this feature. It still raises a warning, but only if syntax warnings are enabled. The feature was originally intended to be a way to express non-printable characters that don't have a mnemonic (C<\t> and C<\n> are mnemonics for two non-printable characters, but most non-printables don't have a mnemonic.) But the feature can be used to specify a few printable characters, though those are more clearly expressed as the printable itself. See L<http://www.nntp.perl.org/group/perl.perl5.porters/2017/02/msg242944.html>. =head1 Performance Enhancements =over 4 =item * A hash in boolean context is now sometimes faster, I<e.g.> if (!%h) { ... } This was already special-cased, but some cases were missed (such as C<grep %$_, @AoH>), and even the ones which weren't have been improved. =item * New Faster Hash Function on 64 bit builds We use a different hash function for short and long keys. This should improve performance and security, especially for long keys. =item * readline is faster Reading from a file line-by-line with C<readline()> or C<< E<lt>E<gt> >> should now typically be faster due to a better implementation of the code that searches for the next newline character. =item * Assigning one reference to another, I<e.g.> C<$ref1 = $ref2> has been optimized in some cases. =item * Remove some exceptions to creating Copy-on-Write strings. The string buffer growth algorithm has been slightly altered so that you're less likely to encounter a string which can't be COWed. =item * Better optimise array and hash assignment: where an array or hash appears in the LHS of a list assignment, such as C<(..., @a) = (...);>, it's likely to be considerably faster, especially if it involves emptying the array/hash. For example, this code runs about a third faster compared to Perl 5.24.0: my @a; for my $i (1..10_000_000) { @a = (1,2,3); @a = (); } =item * Converting a single-digit string to a number is now substantially faster. =item * The C<split> builtin is now slightly faster in many cases: in particular for the two specially-handled forms my @a = split ...; local @a = split ...; =item * The rather slow implementation for the experimental subroutine signatures feature has been made much faster; it is now comparable in speed with the traditional C<my ($a, $b, @c) = @_>. =item * Bareword constant strings are now permitted to take part in constant folding. They were originally exempted from constant folding in August 1999, during the development of Perl 5.6, to ensure that C<use strict "subs"> would still apply to bareword constants. That has now been accomplished a different way, so barewords, like other constants, now gain the performance benefits of constant folding. This also means that void-context warnings on constant expressions of barewords now report the folded constant operand, rather than the operation; this matches the behaviour for non-bareword constants. =back =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * IO::Compress has been upgraded from version 2.069 to 2.074. =item * L<Archive::Tar> has been upgraded from version 2.04 to 2.24. =item * L<arybase> has been upgraded from version 0.11 to 0.12. =item * L<attributes> has been upgraded from version 0.27 to 0.29. The deprecation message for the C<:unique> and C<:locked> attributes now mention that they will disappear in Perl 5.28. =item * L<B> has been upgraded from version 1.62 to 1.68. =item * L<B::Concise> has been upgraded from version 0.996 to 0.999. Its output is now more descriptive for C<op_private> flags. =item * L<B::Debug> has been upgraded from version 1.23 to 1.24. =item * L<B::Deparse> has been upgraded from version 1.37 to 1.40. =item * L<B::Xref> has been upgraded from version 1.05 to 1.06. It now uses 3-arg C<open()> instead of 2-arg C<open()>. L<[perl #130122]|https://rt.perl.org/Public/Bug/Display.html?id=130122> =item * L<base> has been upgraded from version 2.23 to 2.25. =item * L<bignum> has been upgraded from version 0.42 to 0.47. =item * L<Carp> has been upgraded from version 1.40 to 1.42. =item * L<charnames> has been upgraded from version 1.43 to 1.44. =item * L<Compress::Raw::Bzip2> has been upgraded from version 2.069 to 2.074. =item * L<Compress::Raw::Zlib> has been upgraded from version 2.069 to 2.074. =item * L<Config::Perl::V> has been upgraded from version 0.25 to 0.28. =item * L<CPAN> has been upgraded from version 2.11 to 2.18. =item * L<CPAN::Meta> has been upgraded from version 2.150005 to 2.150010. =item * L<Data::Dumper> has been upgraded from version 2.160 to 2.167. The XS implementation now supports Deparse. =item * L<DB_File> has been upgraded from version 1.835 to 1.840. =item * L<Devel::Peek> has been upgraded from version 1.23 to 1.26. =item * L<Devel::PPPort> has been upgraded from version 3.32 to 3.35. =item * L<Devel::SelfStubber> has been upgraded from version 1.05 to 1.06. It now uses 3-arg C<open()> instead of 2-arg C<open()>. L<[perl #130122]|https://rt.perl.org/Public/Bug/Display.html?id=130122> =item * L<diagnostics> has been upgraded from version 1.34 to 1.36. It now uses 3-arg C<open()> instead of 2-arg C<open()>. L<[perl #130122]|https://rt.perl.org/Public/Bug/Display.html?id=130122> =item * L<Digest> has been upgraded from version 1.17 to 1.17_01. =item * L<Digest::MD5> has been upgraded from version 2.54 to 2.55. =item * L<Digest::SHA> has been upgraded from version 5.95 to 5.96. =item * L<DynaLoader> has been upgraded from version 1.38 to 1.42. =item * L<Encode> has been upgraded from version 2.80 to 2.88. =item * L<encoding> has been upgraded from version 2.17 to 2.19. This module's default mode is no longer supported. It now dies when imported, unless the C<Filter> option is being used. =item * L<encoding::warnings> has been upgraded from version 0.12 to 0.13. This module is no longer supported. It emits a warning to that effect and then does nothing. =item * L<Errno> has been upgraded from version 1.25 to 1.28. It now documents that using C<%!> automatically loads Errno for you. It now uses 3-arg C<open()> instead of 2-arg C<open()>. L<[perl #130122]|https://rt.perl.org/Public/Bug/Display.html?id=130122> =item * L<ExtUtils::Embed> has been upgraded from version 1.33 to 1.34. It now uses 3-arg C<open()> instead of 2-arg C<open()>. L<[perl #130122]|https://rt.perl.org/Public/Bug/Display.html?id=130122> =item * L<ExtUtils::MakeMaker> has been upgraded from version 7.10_01 to 7.24. =item * L<ExtUtils::Miniperl> has been upgraded from version 1.05 to 1.06. =item * L<ExtUtils::ParseXS> has been upgraded from version 3.31 to 3.34. =item * L<ExtUtils::Typemaps> has been upgraded from version 3.31 to 3.34. =item * L<feature> has been upgraded from version 1.42 to 1.47. =item * L<File::Copy> has been upgraded from version 2.31 to 2.32. =item * L<File::Fetch> has been upgraded from version 0.48 to 0.52. =item * L<File::Glob> has been upgraded from version 1.26 to 1.28. It now Issues a deprecation message for C<File::Glob::glob()>. =item * L<File::Spec> has been upgraded from version 3.63 to 3.67. =item * L<FileHandle> has been upgraded from version 2.02 to 2.03. =item * L<Filter::Simple> has been upgraded from version 0.92 to 0.93. It no longer treats C<no MyFilter> immediately following C<use MyFilter> as end-of-file. L<[perl #107726]|https://rt.perl.org/Public/Bug/Display.html?id=107726> =item * L<Getopt::Long> has been upgraded from version 2.48 to 2.49. =item * L<Getopt::Std> has been upgraded from version 1.11 to 1.12. =item * L<Hash::Util> has been upgraded from version 0.19 to 0.22. =item * L<HTTP::Tiny> has been upgraded from version 0.056 to 0.070. Internal 599-series errors now include the redirect history. =item * L<I18N::LangTags> has been upgraded from version 0.40 to 0.42. It now uses 3-arg C<open()> instead of 2-arg C<open()>. L<[perl #130122]|https://rt.perl.org/Public/Bug/Display.html?id=130122> =item * L<IO> has been upgraded from version 1.36 to 1.38. =item * L<IO::Socket::IP> has been upgraded from version 0.37 to 0.38. =item * L<IPC::Cmd> has been upgraded from version 0.92 to 0.96. =item * L<IPC::SysV> has been upgraded from version 2.06_01 to 2.07. =item * L<JSON::PP> has been upgraded from version 2.27300 to 2.27400_02. =item * L<lib> has been upgraded from version 0.63 to 0.64. It now uses 3-arg C<open()> instead of 2-arg C<open()>. L<[perl #130122]|https://rt.perl.org/Public/Bug/Display.html?id=130122> =item * L<List::Util> has been upgraded from version 1.42_02 to 1.46_02. =item * L<Locale::Codes> has been upgraded from version 3.37 to 3.42. =item * L<Locale::Maketext> has been upgraded from version 1.26 to 1.28. =item * L<Locale::Maketext::Simple> has been upgraded from version 0.21 to 0.21_01. =item * L<Math::BigInt> has been upgraded from version 1.999715 to 1.999806. =item * L<Math::BigInt::FastCalc> has been upgraded from version 0.40 to 0.5005. =item * L<Math::BigRat> has been upgraded from version 0.260802 to 0.2611. =item * L<Math::Complex> has been upgraded from version 1.59 to 1.5901. =item * L<Memoize> has been upgraded from version 1.03 to 1.03_01. =item * L<Module::CoreList> has been upgraded from version 5.20170420 to 5.20170530. =item * L<Module::Load::Conditional> has been upgraded from version 0.64 to 0.68. =item * L<Module::Metadata> has been upgraded from version 1.000031 to 1.000033. =item * L<mro> has been upgraded from version 1.18 to 1.20. =item * L<Net::Ping> has been upgraded from version 2.43 to 2.55. IPv6 addresses and C<AF_INET6> sockets are now supported, along with several other enhancements. =item * L<NEXT> has been upgraded from version 0.65 to 0.67. =item * L<Opcode> has been upgraded from version 1.34 to 1.39. =item * L<open> has been upgraded from version 1.10 to 1.11. =item * L<OS2::Process> has been upgraded from version 1.11 to 1.12. It now uses 3-arg C<open()> instead of 2-arg C<open()>. L<[perl #130122]|https://rt.perl.org/Public/Bug/Display.html?id=130122> =item * L<overload> has been upgraded from version 1.26 to 1.28. Its compilation speed has been improved slightly. =item * L<parent> has been upgraded from version 0.234 to 0.236. =item * L<perl5db.pl> has been upgraded from version 1.50 to 1.51. It now ignores F</dev/tty> on non-Unix systems. L<[perl #113960]|https://rt.perl.org/Public/Bug/Display.html?id=113960> =item * L<Perl::OSType> has been upgraded from version 1.009 to 1.010. =item * L<perlfaq> has been upgraded from version 5.021010 to 5.021011. =item * L<PerlIO> has been upgraded from version 1.09 to 1.10. =item * L<PerlIO::encoding> has been upgraded from version 0.24 to 0.25. =item * L<PerlIO::scalar> has been upgraded from version 0.24 to 0.26. =item * L<Pod::Checker> has been upgraded from version 1.60 to 1.73. =item * L<Pod::Functions> has been upgraded from version 1.10 to 1.11. =item * L<Pod::Html> has been upgraded from version 1.22 to 1.2202. =item * L<Pod::Perldoc> has been upgraded from version 3.25_02 to 3.28. =item * L<Pod::Simple> has been upgraded from version 3.32 to 3.35. =item * L<Pod::Usage> has been upgraded from version 1.68 to 1.69. =item * L<POSIX> has been upgraded from version 1.65 to 1.76. This remedies several defects in making its symbols exportable. L<[perl #127821]|https://rt.perl.org/Public/Bug/Display.html?id=127821> The C<POSIX::tmpnam()> interface has been removed, see L</"POSIX::tmpnam() has been removed">. The following deprecated functions have been removed: POSIX::isalnum POSIX::isalpha POSIX::iscntrl POSIX::isdigit POSIX::isgraph POSIX::islower POSIX::isprint POSIX::ispunct POSIX::isspace POSIX::isupper POSIX::isxdigit POSIX::tolower POSIX::toupper Trying to import POSIX subs that have no real implementations (like C<POSIX::atend()>) now fails at import time, instead of waiting until runtime. =item * L<re> has been upgraded from version 0.32 to 0.34 This adds support for the new L<C<E<47>xx>|perlre/E<sol>x and E<sol>xx> regular expression pattern modifier, and a change to the L<S<C<use re 'strict'>>|re/'strict' mode> experimental feature. When S<C<re 'strict'>> is enabled, a warning now will be generated for all unescaped uses of the two characters C<"}"> and C<"]"> in regular expression patterns (outside bracketed character classes) that are taken literally. This brings them more in line with the C<")"> character which is always a metacharacter unless escaped. Being a metacharacter only sometimes, depending on an action at a distance, can lead to silently having the pattern mean something quite different than was intended, which the S<C<re 'strict'>> mode is intended to minimize. =item * L<Safe> has been upgraded from version 2.39 to 2.40. =item * L<Scalar::Util> has been upgraded from version 1.42_02 to 1.46_02. =item * L<Storable> has been upgraded from version 2.56 to 2.62. Fixes L<[perl #130098]|https://rt.perl.org/Public/Bug/Display.html?id=130098>. =item * L<Symbol> has been upgraded from version 1.07 to 1.08. =item * L<Sys::Syslog> has been upgraded from version 0.33 to 0.35. =item * L<Term::ANSIColor> has been upgraded from version 4.04 to 4.06. =item * L<Term::ReadLine> has been upgraded from version 1.15 to 1.16. It now uses 3-arg C<open()> instead of 2-arg C<open()>. L<[perl #130122]|https://rt.perl.org/Public/Bug/Display.html?id=130122> =item * L<Test> has been upgraded from version 1.28 to 1.30. It now uses 3-arg C<open()> instead of 2-arg C<open()>. L<[perl #130122]|https://rt.perl.org/Public/Bug/Display.html?id=130122> =item * L<Test::Harness> has been upgraded from version 3.36 to 3.38. =item * L<Test::Simple> has been upgraded from version 1.001014 to 1.302073. =item * L<Thread::Queue> has been upgraded from version 3.09 to 3.12. =item * L<Thread::Semaphore> has been upgraded from 2.12 to 2.13. Added the C<down_timed> method. =item * L<threads> has been upgraded from version 2.07 to 2.15. =item * L<threads::shared> has been upgraded from version 1.51 to 1.56. =item * L<Tie::Hash::NamedCapture> has been upgraded from version 0.09 to 0.10. =item * L<Time::HiRes> has been upgraded from version 1.9733 to 1.9741. It now builds on systems with C++11 compilers (such as G++ 6 and Clang++ 3.9). Now uses C<clockid_t>. =item * L<Time::Local> has been upgraded from version 1.2300 to 1.25. =item * L<Unicode::Collate> has been upgraded from version 1.14 to 1.19. =item * L<Unicode::UCD> has been upgraded from version 0.64 to 0.68. It now uses 3-arg C<open()> instead of 2-arg C<open()>. L<[perl #130122]|https://rt.perl.org/Public/Bug/Display.html?id=130122> =item * L<version> has been upgraded from version 0.9916 to 0.9917. =item * L<VMS::DCLsym> has been upgraded from version 1.06 to 1.08. It now uses 3-arg C<open()> instead of 2-arg C<open()>. L<[perl #130122]|https://rt.perl.org/Public/Bug/Display.html?id=130122> =item * L<warnings> has been upgraded from version 1.36 to 1.37. =item * L<XS::Typemap> has been upgraded from version 0.14 to 0.15. =item * L<XSLoader> has been upgraded from version 0.21 to 0.27. Fixed a security hole in which binary files could be loaded from a path outside of L<C<@INC>|perlvar/@INC>. It now uses 3-arg C<open()> instead of 2-arg C<open()>. L<[perl #130122]|https://rt.perl.org/Public/Bug/Display.html?id=130122> =back =head1 Documentation =head2 New Documentation =head3 L<perldeprecation> This file documents all upcoming deprecations, and some of the deprecations which already have been removed. The purpose of this documentation is two-fold: document what will disappear, and by which version, and serve as a guide for people dealing with code which has features that no longer work after an upgrade of their perl. =head2 Changes to Existing Documentation We have attempted to update the documentation to reflect the changes listed in this document. If you find any we have missed, send email to L<perlbug@perl.org|mailto:perlbug@perl.org>. Additionally, all references to Usenet have been removed, and the following selected changes have been made: =head3 L<perlfunc> =over 4 =item * Removed obsolete text about L<C<defined()>|perlfunc/defined> on aggregates that should have been deleted earlier, when the feature was removed. =item * Corrected documentation of L<C<eval()>|perlfunc/eval>, and L<C<evalbytes()>|perlfunc/evalbytes>. =item * Clarified documentation of L<C<seek()>|perlfunc/seek>, L<C<tell()>|perlfunc/tell> and L<C<sysseek()>|perlfunc/sysseek> emphasizing that positions are in bytes and not characters. L<[perl #128607]|https://rt.perl.org/Public/Bug/Display.html?id=128607> =item * Clarified documentation of L<C<sort()>|perlfunc/sort LIST> concerning the variables C<$a> and C<$b>. =item * In L<C<split()>|perlfunc/split> noted that certain pattern modifiers are legal, and added a caution about its use in Perls before v5.11. =item * Removed obsolete documentation of L<C<study()>|perlfunc/study>, noting that it is now a no-op. =item * Noted that L<C<vec()>|perlfunc/vec> doesn't work well when the string contains characters whose code points are above 255. =back =head3 L<perlguts> =over 4 =item * Added advice on L<formatted printing of operands of C<Size_t> and C<SSize_t>|perlguts/Formatted Printing of Size_t and SSize_t> =back =head3 L<perlhack> =over 4 =item * Clarify what editor tab stop rules to use, and note that we are migrating away from using tabs, replacing them with sequences of SPACE characters. =back =head3 L<perlhacktips> =over 4 =item * Give another reason to use C<cBOOL> to cast an expression to boolean. =item * Note that the macros C<TRUE> and C<FALSE> are available to express boolean values. =back =head3 L<perlinterp> =over 4 =item * L<perlinterp> has been expanded to give a more detailed example of how to hunt around in the parser for how a given operator is handled. =back =head3 L<perllocale> =over 4 =item * Some locales aren't compatible with Perl. Note that these can cause core dumps. =back =head3 L<perlmod> =over 4 =item * Various clarifications have been added. =back =head3 L<perlmodlib> =over 4 =item * Updated the site mirror list. =back =head3 L<perlobj> =over 4 =item * Added a section on calling methods using their fully qualified names. =item * Do not discourage manual C<@ISA>. =back =head3 L<perlootut> =over 4 =item * Mention C<Moo> more. =back =head3 L<perlop> =over 4 =item * Note that white space must be used for quoting operators if the delimiter is a word character (I<i.e.>, matches C<\w>). =item * Clarify that in regular expression patterns delimited by single quotes, no variable interpolation is done. =back =head3 L<perlre> =over 4 =item * The first part was extensively rewritten to incorporate various basic points, that in earlier versions were mentioned in sort of an appendix on Version 8 regular expressions. =item * Note that it is common to have the C</x> modifier and forget that this means that C<"#"> has to be escaped. =back =head3 L<perlretut> =over 4 =item * Add introductory material. =item * Note that a metacharacter occurring in a context where it can't mean that, silently loses its meta-ness and matches literally. L<C<use re 'strict'>|re/'strict' mode> can catch some of these. =back =head3 L<perlunicode> =over 4 =item * Corrected the text about Unicode BYTE ORDER MARK handling. =item * Updated the text to correspond with changes in Unicode UTS#18, concerning regular expressions, and Perl compatibility with what it says. =back =head3 L<perlvar> =over 4 =item * Document C<@ISA>. It was documented in other places, but not in L<perlvar>. =back =head1 Diagnostics =head2 New Diagnostics =head3 New Errors =over 4 =item * L<A signature parameter must start with C<'$'>, C<'@'> or C<'%'> |perldiag/A signature parameter must start with C<'$'>, C<'@'> or C<'%'>> =item * L<Bareword in require contains "%s"|perldiag/"Bareword in require contains "%s""> =item * L<Bareword in require maps to empty filename|perldiag/"Bareword in require maps to empty filename"> =item * L<Bareword in require maps to disallowed filename "%s"|perldiag/"Bareword in require maps to disallowed filename "%s""> =item * L<Bareword in require must not start with a double-colon: "%s"|perldiag/"Bareword in require must not start with a double-colon: "%s""> =item * L<%s: command not found|perldiag/"%s: command not found"> (A) You've accidentally run your script through B<bash> or another shell instead of Perl. Check the C<#!> line, or manually feed your script into Perl yourself. The C<#!> line at the top of your file could look like: #!/usr/bin/perl =item * L<%s: command not found: %s|perldiag/"%s: command not found: %s"> (A) You've accidentally run your script through B<zsh> or another shell instead of Perl. Check the C<#!> line, or manually feed your script into Perl yourself. The C<#!> line at the top of your file could look like: #!/usr/bin/perl =item * L<The experimental declared_refs feature is not enabled|perldiag/"The experimental declared_refs feature is not enabled"> (F) To declare references to variables, as in C<my \%x>, you must first enable the feature: no warnings "experimental::declared_refs"; use feature "declared_refs"; See L</Declaring a reference to a variable>. =item * L<Illegal character following sigil in a subroutine signature |perldiag/Illegal character following sigil in a subroutine signature> =item * L<Indentation on line %d of here-doc doesn't match delimiter |perldiag/Indentation on line %d of here-doc doesn't match delimiter> =item * L<Infinite recursion via empty pattern|perldiag/"Infinite recursion via empty pattern">. Using the empty pattern (which re-executes the last successfully-matched pattern) inside a code block in another regex, as in C</(?{ s!!new! })/>, has always previously yielded a segfault. It now produces this error. =item * L<Malformed UTF-8 string in "%s" |perldiag/Malformed UTF-8 string in "%s"> =item * L<Multiple slurpy parameters not allowed |perldiag/Multiple slurpy parameters not allowed> =item * L<C<'#'> not allowed immediately following a sigil in a subroutine signature |perldiag/C<'#'> not allowed immediately following a sigil in a subroutine signature> =item * L<panic: unknown OA_*: %x |perldiag/panic: unknown OA_*: %x> =item * L<Unescaped left brace in regex is illegal here|perldiag/Unescaped left brace in regex is illegal here in regex; marked by S<E<lt>-- HERE> in mE<sol>%sE<sol>> Unescaped left braces are now illegal in some contexts in regular expression patterns. In other contexts, they are still just deprecated; they will be illegal in Perl 5.30. =item * L<Version control conflict marker|perldiag/"Version control conflict marker"> (F) The parser found a line starting with C<E<lt>E<lt>E<lt>E<lt>E<lt>E<lt>E<lt>>, C<E<gt>E<gt>E<gt>E<gt>E<gt>E<gt>E<gt>>, or C<=======>. These may be left by a version control system to mark conflicts after a failed merge operation. =back =head3 New Warnings =over 4 =item * L<Can't determine class of operator %s, assuming C<BASEOP> |perldiag/Can't determine class of operator %s, assuming C<BASEOP>> =item * L<Declaring references is experimental|perldiag/"Declaring references is experimental"> (S experimental::declared_refs) This warning is emitted if you use a reference constructor on the right-hand side of C<my()>, C<state()>, C<our()>, or C<local()>. Simply suppress the warning if you want to use the feature, but know that in doing so you are taking the risk of using an experimental feature which may change or be removed in a future Perl version: no warnings "experimental::declared_refs"; use feature "declared_refs"; $fooref = my \$foo; See L</Declaring a reference to a variable>. =item * L<do "%s" failed, '.' is no longer in @INC|perldiag/do "%s" failed, '.' is no longer in @INC; did you mean do ".E<sol>%s"?> Since C<"."> is now removed from C<@INC> by default, C<do> will now trigger a warning recommending to fix the C<do> statement. =item * L<C<File::Glob::glob()> will disappear in perl 5.30. Use C<File::Glob::bsd_glob()> instead. |perldiag/C<File::Glob::glob()> will disappear in perl 5.30. Use C<File::Glob::bsd_glob()> instead.> =item * L<Unescaped literal '%c' in regex; marked by E<lt>-- HERE in mE<sol>%sE<sol> |perldiag/Unescaped literal '%c' in regex; marked by <-- HERE in mE<sol>%sE<sol>> =item * L<Use of unassigned code point or non-standalone grapheme for a delimiter will be a fatal error starting in Perl 5.30|perldiag/"Use of unassigned code point or non-standalone grapheme for a delimiter will be a fatal error starting in Perl 5.30"> See L</Deprecations> =back =head2 Changes to Existing Diagnostics =over 4 =item * When a C<require> fails, we now do not provide C<@INC> when the C<require> is for a file instead of a module. =item * When C<@INC> is not scanned for a C<require> call, we no longer display C<@INC> to avoid confusion. =item * L<Attribute "locked" is deprecated, and will disappear in Perl 5.28 |perldiag/Attribute "locked" is deprecated, and will disappear in Perl 5.28> This existing warning has had the I<and will disappear> text added in this release. =item * L<Attribute "unique" is deprecated, and will disappear in Perl 5.28 |perldiag/Attribute "unique" is deprecated, and will disappear in Perl 5.28> This existing warning has had the I<and will disappear> text added in this release. =item * Calling POSIX::%s() is deprecated This warning has been removed, as the deprecated functions have been removed from POSIX. =item * L<Constants from lexical variables potentially modified elsewhere are deprecated. This will not be allowed in Perl 5.32 |perldiag/Constants from lexical variables potentially modified elsewhere are deprecated. This will not be allowed in Perl 5.32> This existing warning has had the I<this will not be allowed> text added in this release. =item * L<Deprecated use of C<my()> in false conditional. This will be a fatal error in Perl 5.30 |perldiag/Deprecated use of C<my()> in false conditional. This will be a fatal error in Perl 5.30> This existing warning has had the I<this will be a fatal error> text added in this release. =item * L<C<dump()> better written as C<CORE::dump()>. C<dump()> will no longer be available in Perl 5.30 |perldiag/C<dump()> better written as C<CORE::dump()>. C<dump()> will no longer be available in Perl 5.30> This existing warning has had the I<no longer be available> text added in this release. =item * L<Experimental %s on scalar is now forbidden |perldiag/Experimental %s on scalar is now forbidden> This message is now followed by more helpful text. L<[perl #127976]|https://rt.perl.org/Public/Bug/Display.html?id=127976> =item * Experimental "%s" subs not enabled This warning was been removed, as lexical subs are no longer experimental. =item * Having more than one /%c regexp modifier is deprecated This deprecation warning has been removed, since C</xx> now has a new meaning. =item * L<%s() is deprecated on C<:utf8> handles. This will be a fatal error in Perl 5.30 |perldiag/%s() is deprecated on C<:utf8> handles. This will be a fatal error in Perl 5.30>. where "%s" is one of C<sysread>, C<recv>, C<syswrite>, or C<send>. This existing warning has had the I<this will be a fatal error> text added in this release. This warning is now enabled by default, as all C<deprecated> category warnings should be. =item * L<C<$*> is no longer supported. Its use will be fatal in Perl 5.30 |perldiag/C<$*> is no longer supported. Its use will be fatal in Perl 5.30> This existing warning has had the I<its use will be fatal> text added in this release. =item * L<C<$#> is no longer supported. Its use will be fatal in Perl 5.30 |perldiag/C<$#> is no longer supported. Its use will be fatal in Perl 5.30> This existing warning has had the I<its use will be fatal> text added in this release. =item * L<Malformed UTF-8 character%s |perldiag/Malformed UTF-8 character%s> Details as to the exact problem have been added at the end of this message =item * L<Missing or undefined argument to %s |perldiag/Missing or undefined argument to %s> This warning used to warn about C<require>, even if it was actually C<do> which being executed. It now gets the operation name right. =item * NO-BREAK SPACE in a charnames alias definition is deprecated This warning has been removed as the behavior is now an error. =item * L<Odd nameE<sol>value argument for subroutine '%s' |perldiag/"Odd nameE<sol>value argument for subroutine '%s'"> This warning now includes the name of the offending subroutine. =item * L<Opening dirhandle %s also as a file. This will be a fatal error in Perl 5.28 |perldiag/Opening dirhandle %s also as a file. This will be a fatal error in Perl 5.28> This existing warning has had the I<this will be a fatal error> text added in this release. =item * L<Opening filehandle %s also as a directory. This will be a fatal error in Perl 5.28 |perldiag/Opening filehandle %s also as a directory. This will be a fatal error in Perl 5.28> This existing warning has had the I<this will be a fatal error> text added in this release. =item * panic: ck_split, type=%u panic: pp_split, pm=%p, s=%p These panic errors have been removed. =item * Passing malformed UTF-8 to "%s" is deprecated This warning has been changed to the fatal L<Malformed UTF-8 string in "%s" |perldiag/Malformed UTF-8 string in "%s"> =item * L<Setting C<< $E<sol> >> to a reference to %s as a form of slurp is deprecated, treating as undef. This will be fatal in Perl 5.28 |perldiag/Setting C<< $E<sol> >> to a reference to %s as a form of slurp is deprecated, treating as undef. This will be fatal in Perl 5.28> This existing warning has had the I<this will be fatal> text added in this release. =item * L<C<${^ENCODING}> is no longer supported. Its use will be fatal in Perl 5.28|perldiag/"${^ENCODING} is no longer supported. Its use will be fatal in Perl 5.28"> This warning used to be: "Setting C<${^ENCODING}> is deprecated". The special action of the variable C<${^ENCODING}> was formerly used to implement the C<encoding> pragma. As of Perl 5.26, rather than being deprecated, assigning to this variable now has no effect except to issue the warning. =item * L<Too few arguments for subroutine '%s' |perldiag/Too few arguments for subroutine '%s'> This warning now includes the name of the offending subroutine. =item * L<Too many arguments for subroutine '%s' |perldiag/Too many arguments for subroutine '%s'> This warning now includes the name of the offending subroutine. =item * L<Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by S<< E<lt>-- HERE >> in mE<sol>%sE<sol> |perldiag/Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by S<< E<lt>-- HERE >> in mE<sol>%sE<sol>> This existing warning has had the I<here (and will be fatal...)> text added in this release. =item * L<Unknown charname '' is deprecated. Its use will be fatal in Perl 5.28 |perldiag/Unknown charname '' is deprecated. Its use will be fatal in Perl 5.28> This existing warning has had the I<its use will be fatal> text added in this release. =item * L<Use of bare E<lt>E<lt> to mean E<lt>E<lt>"" is deprecated. Its use will be fatal in Perl 5.28 |perldiag/Use of bare E<lt>E<lt> to mean E<lt>E<lt>"" is deprecated. Its use will be fatal in Perl 5.28> This existing warning has had the I<its use will be fatal> text added in this release. =item * L<Use of code point 0x%s is deprecated; the permissible max is 0x%s. This will be fatal in Perl 5.28 |perldiag/Use of code point 0x%s is deprecated; the permissible max is 0x%s. This will be fatal in Perl 5.28> This existing warning has had the I<this will be fatal> text added in this release. =item * L<Use of comma-less variable list is deprecated. Its use will be fatal in Perl 5.28 |perldiag/Use of comma-less variable list is deprecated. Its use will be fatal in Perl 5.28> This existing warning has had the I<its use will be fatal> text added in this release. =item * L<Use of inherited C<AUTOLOAD> for non-method %s() is deprecated. This will be fatal in Perl 5.28 |perldiag/Use of inherited C<AUTOLOAD> for non-method %s() is deprecated. This will be fatal in Perl 5.28> This existing warning has had the I<this will be fatal> text added in this release. =item * L<Use of strings with code points over 0xFF as arguments to %s operator is deprecated. This will be a fatal error in Perl 5.28 |perldiag/Use of strings with code points over 0xFF as arguments to %s operator is deprecated. This will be a fatal error in Perl 5.28> This existing warning has had the I<this will be a fatal error> text added in this release. =back =head1 Utility Changes =head2 F<c2ph> and F<pstruct> =over 4 =item * These old utilities have long since superceded by L<h2xs>, and are now gone from the distribution. =back =head2 F<Porting/pod_lib.pl> =over 4 =item * Removed spurious executable bit. =item * Account for the possibility of DOS file endings. =back =head2 F<Porting/sync-with-cpan> =over 4 =item * Many improvements. =back =head2 F<perf/benchmarks> =over 4 =item * Tidy file, rename some symbols. =back =head2 F<Porting/checkAUTHORS.pl> =over 4 =item * Replace obscure character range with C<\w>. =back =head2 F<t/porting/regen.t> =over 4 =item * Try to be more helpful when tests fail. =back =head2 F<utils/h2xs.PL> =over 4 =item * Avoid infinite loop for enums. =back =head2 L<perlbug> =over 4 =item * Long lines in the message body are now wrapped at 900 characters, to stay well within the 1000-character limit imposed by SMTP mail transfer agents. This is particularly likely to be important for the list of arguments to F<Configure>, which can readily exceed the limit if, for example, it names several non-default installation paths. This change also adds the first unit tests for perlbug. L<[perl #128020]|https://rt.perl.org/Public/Bug/Display.html?id=128020> =back =head1 Configuration and Compilation =over 4 =item * C<-Ddefault_inc_excludes_dot> has added, and enabled by default. =item * The C<dtrace> build process has further changes L<[perl #130108]|https://rt.perl.org/Public/Bug/Display.html?id=130108>: =over =item * If the C<-xnolibs> is available, use that so a F<dtrace> perl can be built within a FreeBSD jail. =item * On systems that build a F<dtrace> object file (FreeBSD, Solaris, and SystemTap's dtrace emulation), copy the input objects to a separate directory and process them there, and use those objects in the link, since C<dtrace -G> also modifies these objects. =item * Add F<libelf> to the build on FreeBSD 10.x, since F<dtrace> adds references to F<libelf> symbols. =item * Generate a dummy F<dtrace_main.o> if C<dtrace -G> fails to build it. A default build on Solaris generates probes from the unused inline functions, while they don't on FreeBSD, which causes C<dtrace -G> to fail. =back =item * You can now disable perl's use of the C<PERL_HASH_SEED> and C<PERL_PERTURB_KEYS> environment variables by configuring perl with C<-Accflags=NO_PERL_HASH_ENV>. =item * You can now disable perl's use of the C<PERL_HASH_SEED_DEBUG> environment variable by configuring perl with C<-Accflags=-DNO_PERL_HASH_SEED_DEBUG>. =item * F<Configure> now zeroes out the alignment bytes when calculating the bytes for 80-bit C<NaN> and C<Inf> to make builds more reproducible. L<[perl #130133]|https://rt.perl.org/Public/Bug/Display.html?id=130133> =item * Since v5.18, for testing purposes we have included support for building perl with a variety of non-standard, and non-recommended hash functions. Since we do not recommend the use of these functions, we have removed them and their corresponding build options. Specifically this includes the following build options: PERL_HASH_FUNC_SDBM PERL_HASH_FUNC_DJB2 PERL_HASH_FUNC_SUPERFAST PERL_HASH_FUNC_MURMUR3 PERL_HASH_FUNC_ONE_AT_A_TIME PERL_HASH_FUNC_ONE_AT_A_TIME_OLD PERL_HASH_FUNC_MURMUR_HASH_64A PERL_HASH_FUNC_MURMUR_HASH_64B =item * Remove "Warning: perl appears in your path" This install warning is more or less obsolete, since most platforms already B<will> have a F</usr/bin/perl> or similar provided by the OS. =item * Reduce verbosity of C<make install.man> Previously, two progress messages were emitted for each manpage: one by installman itself, and one by the function in F<install_lib.pl> that it calls to actually install the file. Disabling the second of those in each case saves over 750 lines of unhelpful output. =item * Cleanup for C<clang -Weverything> support. L<[perl #129961]|https://rt.perl.org/Public/Bug/Display.html?id=129961> =item * F<Configure>: signbit scan was assuming too much, stop assuming negative 0. =item * Various compiler warnings have been silenced. =item * Several smaller changes have been made to remove impediments to compiling under C++11. =item * Builds using C<USE_PAD_RESET> now work again; this configuration had bit-rotted. =item * A probe for C<gai_strerror> was added to F<Configure> that checks if the C<gai_strerror()> routine is available and can be used to translate error codes returned by C<getaddrinfo()> into human readable strings. =item * F<Configure> now aborts if both C<-Duselongdouble> and C<-Dusequadmath> are requested. L<[perl #126203]|https://rt.perl.org/Public/Bug/Display.html?id=126203> =item * Fixed a bug in which F<Configure> could append C<-quadmath> to the archname even if it was already present. L<[perl #128538]|https://rt.perl.org/Public/Bug/Display.html?id=128538> =item * Clang builds with C<-DPERL_GLOBAL_STRUCT> or C<-DPERL_GLOBAL_STRUCT_PRIVATE> have been fixed (by disabling Thread Safety Analysis for these configurations). =item * F<make_ext.pl> no longer updates a module's F<pm_to_blib> file when no files require updates. This could cause dependencies, F<perlmain.c> in particular, to be rebuilt unnecessarily. L<[perl #126710]|https://rt.perl.org/Public/Bug/Display.html?id=126710> =item * The output of C<perl -V> has been reformatted so that each configuration and compile-time option is now listed one per line, to improve readability. =item * F<Configure> now builds C<miniperl> and C<generate_uudmap> if you invoke it with C<-Dusecrosscompiler> but not C<-Dtargethost=somehost>. This means you can supply your target platform C<config.sh>, generate the headers and proceed to build your cross-target perl. L<[perl #127234]|https://rt.perl.org/Public/Bug/Display.html?id=127234> =item * Perl built with C<-Accflags=-DPERL_TRACE_OPS> now only dumps the operator counts when the environment variable C<PERL_TRACE_OPS> is set to a non-zero integer. This allows C<make test> to pass on such a build. =item * When building with GCC 6 and link-time optimization (the C<-flto> option to C<gcc>), F<Configure> was treating all probed symbols as present on the system, regardless of whether they actually exist. This has been fixed. L<[perl #128131]|https://rt.perl.org/Public/Bug/Display.html?id=128131> =item * The F<t/test.pl> library is used for internal testing of Perl itself, and also copied by several CPAN modules. Some of those modules must work on older versions of Perl, so F<t/test.pl> must in turn avoid newer Perl features. Compatibility with Perl 5.8 was inadvertently removed some time ago; it has now been restored. L<[perl #128052]|https://rt.perl.org/Public/Bug/Display.html?id=128052> =item * The build process no longer emits an extra blank line before building each "simple" extension (those with only F<*.pm> and F<*.pod> files). =back =head1 Testing Tests were added and changed to reflect the other additions and changes in this release. Furthermore, these substantive changes were made: =over 4 =item * A new test script, F<comp/parser_run.t>, has been added that is like F<comp/parser.t> but with F<test.pl> included so that C<runperl()> and the like are available for use. =item * Tests for locales were erroneously using locales incompatible with Perl. =item * Some parts of the test suite that try to exhaustively test edge cases in the regex implementation have been restricted to running for a maximum of five minutes. On slow systems they could otherwise take several hours, without significantly improving our understanding of the correctness of the code under test. =item * A new internal facility allows analysing the time taken by the individual tests in Perl's own test suite; see F<Porting/harness-timer-report.pl>. =item * F<t/re/regexp_nonull.t> has been added to test that the regular expression engine can handle scalars that do not have a null byte just past the end of the string. =item * A new test script, F<t/op/decl-refs.t>, has been added to test the new feature L</Declaring a reference to a variable>. =item * A new test script, F<t/re/keep_tabs.t> has been added to contain tests where C<\t> characters should not be expanded into spaces. =item * A new test script, F<t/re/anyof.t>, has been added to test that the ANYOF nodes generated by bracketed character classes are as expected. =item * There is now more extensive testing of the Unicode-related API macros and functions. =item * Several of the longer running API test files have been split into multiple test files so that they can be run in parallel. =item * F<t/harness> now tries really hard not to run tests which are located outside of the Perl source tree. L<[perl #124050]|https://rt.perl.org/Public/Bug/Display.html?id=124050> =item * Prevent debugger tests (F<lib/perl5db.t>) from failing due to the contents of C<$ENV{PERLDB_OPTS}>. L<[perl #130445]|https://rt.perl.org/Public/Bug/Display.html?id=130445> =back =head1 Platform Support =head2 New Platforms =over 4 =item NetBSD/VAX Perl now compiles under NetBSD on VAX machines. However, it's not possible for that platform to implement floating-point infinities and NaNs compatible with most modern systems, which implement the IEEE-754 floating point standard. The hexadecimal floating point (C<0x...p[+-]n> literals, C<printf %a>) is not implemented, either. The C<make test> passes 98% of tests. =over 4 =item * Test fixes and minor updates. =item * Account for lack of C<inf>, C<nan>, and C<-0.0> support. =back =back =head2 Platform-Specific Notes =over 4 =item Darwin =over 4 =item * Don't treat C<-Dprefix=/usr> as special: instead require an extra option C<-Ddarwin_distribution> to produce the same results. =item * OS X El Capitan doesn't implement the C<clock_gettime()> or C<clock_getres()> APIs; emulate them as necessary. =item * Deprecated C<syscall(2)> on macOS 10.12. =back =item EBCDIC Several tests have been updated to work (or be skipped) on EBCDIC platforms. =item HP-UX The L<Net::Ping> UDP test is now skipped on HP-UX. =item Hurd The hints for Hurd have been improved, enabling malloc wrap and reporting the GNU libc used (previously it was an empty string when reported). =item VAX VAX floating point formats are now supported on NetBSD. =item VMS =over 4 =item * The path separator for the C<PERL5LIB> and C<PERLLIB> environment entries is now a colon (C<":">) when running under a Unix shell. There is no change when running under DCL (it's still C<"|">). =item * F<configure.com> now recognizes the VSI-branded C compiler and no longer recognizes the "DEC"-branded C compiler (as there hasn't been such a thing for 15 or more years). =back =item Windows =over 4 =item * Support for compiling perl on Windows using Microsoft Visual Studio 2015 (containing Visual C++ 14.0) has been added. This version of VC++ includes a completely rewritten C run-time library, some of the changes in which mean that work done to resolve a socket C<close()> bug in perl #120091 and perl #118059 is not workable in its current state with this version of VC++. Therefore, we have effectively reverted that bug fix for VS2015 onwards on the basis that being able to build with VS2015 onwards is more important than keeping the bug fix. We may revisit this in the future to attempt to fix the bug again in a way that is compatible with VS2015. These changes do not affect compilation with GCC or with Visual Studio versions up to and including VS2013, I<i.e.>, the bug fix is retained (unchanged) for those compilers. Note that you may experience compatibility problems if you mix a perl built with GCC or VS E<lt>= VS2013 with XS modules built with VS2015, or if you mix a perl built with VS2015 with XS modules built with GCC or VS E<lt>= VS2013. Some incompatibility may arise because of the bug fix that has been reverted for VS2015 builds of perl, but there may well be incompatibility anyway because of the rewritten CRT in VS2015 (I<e.g.>, see discussion at L<http://stackoverflow.com/questions/30412951>). =item * It now automatically detects GCC versus Visual C and sets the VC version number on Win32. =back =item Linux Drop support for Linux F<a.out> executable format. Linux has used ELF for over twenty years. =item OpenBSD 6 OpenBSD 6 still does not support returning C<pid>, C<gid>, or C<uid> with C<SA_SIGINFO>. Make sure to account for it. =item FreeBSD F<t/uni/overload.t>: Skip hanging test on FreeBSD. =item DragonFly BSD DragonFly BSD now has support for C<setproctitle()>. L<[perl #130068]|https://rt.perl.org/Public/Bug/Display.html?id=130068>. =back =head1 Internal Changes =over 4 =item * A new API function L<C<sv_setpv_bufsize()>|perlapi/sv_setpv_bufsize> allows simultaneously setting the length and the allocated size of the buffer in an C<SV>, growing the buffer if necessary. =item * A new API macro L<C<SvPVCLEAR()>|perlapi/SvPVCLEAR> sets its C<SV> argument to an empty string, like Perl-space C<$x = ''>, but with several optimisations. =item * Several new macros and functions for dealing with Unicode and UTF-8-encoded strings have been added to the API, as well as some changes in the functionality of existing functions (see L<perlapi/Unicode Support> for more details): =over =item * New versions of the API macros like C<isALPHA_utf8> and C<toLOWER_utf8> have been added, each with the suffix C<_safe>, like L<C<isSPACE_utf8_safe>|perlapi/isSPACE>. These take an extra parameter, giving an upper limit of how far into the string it is safe to read. Using the old versions could cause attempts to read beyond the end of the input buffer if the UTF-8 is not well-formed, and their use now raises a deprecation warning. Details are at L<perlapi/Character classification>. =item * Macros like L<C<isALPHA_utf8>|perlapi/isALPHA> and L<C<toLOWER_utf8>|perlapi/toLOWER_utf8> now die if they detect that their input UTF-8 is malformed. A deprecation warning had been issued since Perl 5.18. =item * Several new macros for analysing the validity of utf8 sequences. These are: L<C<UTF8_GOT_ABOVE_31_BIT>|perlapi/UTF8_GOT_ABOVE_31_BIT> L<C<UTF8_GOT_CONTINUATION>|perlapi/UTF8_GOT_CONTINUATION> L<C<UTF8_GOT_EMPTY>|perlapi/UTF8_GOT_EMPTY> L<C<UTF8_GOT_LONG>|perlapi/UTF8_GOT_LONG> L<C<UTF8_GOT_NONCHAR>|perlapi/UTF8_GOT_NONCHAR> L<C<UTF8_GOT_NON_CONTINUATION>|perlapi/UTF8_GOT_NON_CONTINUATION> L<C<UTF8_GOT_OVERFLOW>|perlapi/UTF8_GOT_OVERFLOW> L<C<UTF8_GOT_SHORT>|perlapi/UTF8_GOT_SHORT> L<C<UTF8_GOT_SUPER>|perlapi/UTF8_GOT_SUPER> L<C<UTF8_GOT_SURROGATE>|perlapi/UTF8_GOT_SURROGATE> L<C<UTF8_IS_INVARIANT>|perlapi/UTF8_IS_INVARIANT> L<C<UTF8_IS_NONCHAR>|perlapi/UTF8_IS_NONCHAR> L<C<UTF8_IS_SUPER>|perlapi/UTF8_IS_SUPER> L<C<UTF8_IS_SURROGATE>|perlapi/UTF8_IS_SURROGATE> L<C<UVCHR_IS_INVARIANT>|perlapi/UVCHR_IS_INVARIANT> L<C<isUTF8_CHAR_flags>|perlapi/isUTF8_CHAR_flags> L<C<isSTRICT_UTF8_CHAR>|perlapi/isSTRICT_UTF8_CHAR> L<C<isC9_STRICT_UTF8_CHAR>|perlapi/isC9_STRICT_UTF8_CHAR> =item * Functions that are all extensions of the C<is_utf8_string_I<*>()> functions, that apply various restrictions to the UTF-8 recognized as valid: L<C<is_strict_utf8_string>|perlapi/is_strict_utf8_string>, L<C<is_strict_utf8_string_loc>|perlapi/is_strict_utf8_string_loc>, L<C<is_strict_utf8_string_loclen>|perlapi/is_strict_utf8_string_loclen>, L<C<is_c9strict_utf8_string>|perlapi/is_c9strict_utf8_string>, L<C<is_c9strict_utf8_string_loc>|perlapi/is_c9strict_utf8_string_loc>, L<C<is_c9strict_utf8_string_loclen>|perlapi/is_c9strict_utf8_string_loclen>, L<C<is_utf8_string_flags>|perlapi/is_utf8_string_flags>, L<C<is_utf8_string_loc_flags>|perlapi/is_utf8_string_loc_flags>, L<C<is_utf8_string_loclen_flags>|perlapi/is_utf8_string_loclen_flags>, L<C<is_utf8_fixed_width_buf_flags>|perlapi/is_utf8_fixed_width_buf_flags>, L<C<is_utf8_fixed_width_buf_loc_flags>|perlapi/is_utf8_fixed_width_buf_loc_flags>, L<C<is_utf8_fixed_width_buf_loclen_flags>|perlapi/is_utf8_fixed_width_buf_loclen_flags>. L<C<is_utf8_invariant_string>|perlapi/is_utf8_invariant_string>. L<C<is_utf8_valid_partial_char>|perlapi/is_utf8_valid_partial_char>. L<C<is_utf8_valid_partial_char_flags>|perlapi/is_utf8_valid_partial_char_flags>. =item * The functions L<C<utf8n_to_uvchr>|perlapi/utf8n_to_uvchr> and its derivatives have had several changes of behaviour. Calling them, while passing a string length of 0 is now asserted against in DEBUGGING builds, and otherwise, returns the Unicode REPLACEMENT CHARACTER. If you have nothing to decode, you shouldn't call the decode function. They now return the Unicode REPLACEMENT CHARACTER if called with UTF-8 that has the overlong malformation and that malformation is allowed by the input parameters. This malformation is where the UTF-8 looks valid syntactically, but there is a shorter sequence that yields the same code point. This has been forbidden since Unicode version 3.1. They now accept an input flag to allow the overflow malformation. This malformation is when the UTF-8 may be syntactically valid, but the code point it represents is not capable of being represented in the word length on the platform. What "allowed" means, in this case, is that the function doesn't return an error, and it advances the parse pointer to beyond the UTF-8 in question, but it returns the Unicode REPLACEMENT CHARACTER as the value of the code point (since the real value is not representable). They no longer abandon searching for other malformations when the first one is encountered. A call to one of these functions thus can generate multiple diagnostics, instead of just one. =item * L<C<valid_utf8_to_uvchr()>|perlapi/valid_utf8_to_uvchr> has been added to the API (although it was present in core earlier). Like C<utf8_to_uvchr_buf()>, but assumes that the next character is well-formed. Use with caution. =item * A new function, L<C<utf8n_to_uvchr_error>|perlapi/utf8n_to_uvchr_error>, has been added for use by modules that need to know the details of UTF-8 malformations beyond pass/fail. Previously, the only ways to know why a sequence was ill-formed was to capture and parse the generated diagnostics or to do your own analysis. =item * There is now a safer version of utf8_hop(), called L<C<utf8_hop_safe()>|perlapi/utf8_hop_safe>. Unlike utf8_hop(), utf8_hop_safe() won't navigate before the beginning or after the end of the supplied buffer. =item * Two new functions, L<C<utf8_hop_forward()>|perlapi/utf8_hop_forward> and L<C<utf8_hop_back()>|perlapi/utf8_hop_back> are similar to C<utf8_hop_safe()> but are for when you know which direction you wish to travel. =item * Two new macros which return useful utf8 byte sequences: L<C<BOM_UTF8>|perlapi/BOM_UTF8> L<C<REPLACEMENT_CHARACTER_UTF8>|perlapi/REPLACEMENT_CHARACTER_UTF8> =back =item * Perl is now built with the C<PERL_OP_PARENT> compiler define enabled by default. To disable it, use the C<PERL_NO_OP_PARENT> compiler define. This flag alters how the C<op_sibling> field is used in C<OP> structures, and has been available optionally since perl 5.22. See L<perl5220delta/"Internal Changes"> for more details of what this build option does. =item * Three new ops, C<OP_ARGELEM>, C<OP_ARGDEFELEM>, and C<OP_ARGCHECK> have been added. These are intended principally to implement the individual elements of a subroutine signature, plus any overall checking required. =item * The C<OP_PUSHRE> op has been eliminated and the C<OP_SPLIT> op has been changed from class C<LISTOP> to C<PMOP>. Formerly the first child of a split would be a C<pushre>, which would have the C<split>'s regex attached to it. Now the regex is attached directly to the C<split> op, and the C<pushre> has been eliminated. =item * The L<C<op_class()>|perlapi/op_class> API function has been added. This is like the existing C<OP_CLASS()> macro, but can more accurately determine what struct an op has been allocated as. For example C<OP_CLASS()> might return C<OA_BASEOP_OR_UNOP> indicating that ops of this type are usually allocated as an C<OP> or C<UNOP>; while C<op_class()> will return C<OPclass_BASEOP> or C<OPclass_UNOP> as appropriate. =item * All parts of the internals now agree that the C<sassign> op is a C<BINOP>; previously it was listed as a C<BASEOP> in F<regen/opcodes>, which meant that several parts of the internals had to be special-cased to accommodate it. This oddity's original motivation was to handle code like C<$x ||= 1>; that is now handled in a simpler way. =item * The output format of the L<C<op_dump()>|perlapi/op_dump> function (as used by C<perl -Dx>) has changed: it now displays an "ASCII-art" tree structure, and shows more low-level details about each op, such as its address and class. =item * The C<PADOFFSET> type has changed from being unsigned to signed, and several pad-related variables such as C<PL_padix> have changed from being of type C<I32> to type C<PADOFFSET>. =item * The C<DEBUGGING>-mode output for regex compilation and execution has been enhanced. =item * Several obscure SV flags have been eliminated, sometimes along with the macros which manipulate them: C<SVpbm_VALID>, C<SVpbm_TAIL>, C<SvTAIL_on>, C<SvTAIL_off>, C<SVrepl_EVAL>, C<SvEVALED>. =item * An OP C<op_private> flag has been eliminated: C<OPpRUNTIME>. This used to often get set on C<PMOP> ops, but had become meaningless over time. =back =head1 Selected Bug Fixes =over 4 =item * Perl no longer panics when switching into some locales on machines with buggy C<strxfrm()> implementations in their F<libc>. L<[perl #121734]|https://rt.perl.org/Public/Bug/Display.html?id=121734> =item * C< $-{$name} > would leak an C<AV> on each access if the regular expression had no named captures. The same applies to access to any hash tied with L<Tie::Hash::NamedCapture> and C<< all =E<gt> 1 >>. L<[perl #130822]|https://rt.perl.org/Public/Bug/Display.html?id=130822> =item * Attempting to use the deprecated variable C<$#> as the object in an indirect object method call could cause a heap use after free or buffer overflow. L<[perl #129274]|https://rt.perl.org/Public/Bug/Display.html?id=129274> =item * When checking for an indirect object method call, in some rare cases the parser could reallocate the line buffer but then continue to use pointers to the old buffer. L<[perl #129190]|https://rt.perl.org/Public/Bug/Display.html?id=129190> =item * Supplying a glob as the format argument to L<C<formline>|perlfunc/formline> would cause an assertion failure. L<[perl #130722]|https://rt.perl.org/Public/Bug/Display.html?id=130722> =item * Code like C< $value1 =~ qr/.../ ~~ $value2 > would have the match converted into a C<qr//> operator, leaving extra elements on the stack to confuse any surrounding expression. L<[perl #130705]|https://rt.perl.org/Public/Bug/Display.html?id=130705> =item * Since v5.24 in some obscure cases, a regex which included code blocks from multiple sources (I<e.g.>, via embedded via C<qr//> objects) could end up with the wrong current pad and crash or give weird results. L<[perl #129881]|https://rt.perl.org/Public/Bug/Display.html?id=129881> =item * Occasionally C<local()>s in a code block within a patterns weren't being undone when the pattern matching backtracked over the code block. L<[perl #126697]|https://rt.perl.org/Public/Bug/Display.html?id=126697> =item * Using C<substr()> to modify a magic variable could access freed memory in some cases. L<[perl #129340]|https://rt.perl.org/Public/Bug/Display.html?id=129340> =item * Under C<use utf8>, the entire source code is now checked for being UTF-8 well formed, not just quoted strings as before. L<[perl #126310]|https://rt.perl.org/Public/Bug/Display.html?id=126310>. =item * The range operator C<".."> on strings now handles its arguments correctly when in the scope of the L<< C<unicode_strings>|feature/"The 'unicode_strings' feature" >> feature. The previous behaviour was sufficiently unexpected that we believe no correct program could have made use of it. =item * The C<split> operator did not ensure enough space was allocated for its return value in scalar context. It could then write a single pointer immediately beyond the end of the memory block allocated for the stack. L<[perl #130262]|https://rt.perl.org/Public/Bug/Display.html?id=130262> =item * Using a large code point with the C<"W"> pack template character with the current output position aligned at just the right point could cause a write of a single zero byte immediately beyond the end of an allocated buffer. L<[perl #129149]|https://rt.perl.org/Public/Bug/Display.html?id=129149> =item * Supplying a format's picture argument as part of the format argument list where the picture specifies modifying the argument could cause an access to the new freed compiled format. L<[perl #129125]|https://rt.perl.org/Public/Bug/Display.html?id=129125> =item * The L<sort()|perlfunc/sort> operator's built-in numeric comparison function didn't handle large integers that weren't exactly representable by a double. This now uses the same code used to implement the C<< E<lt>=E<gt> >> operator. L<[perl #130335]|https://rt.perl.org/Public/Bug/Display.html?id=130335> =item * Fix issues with C</(?{ ... E<lt>E<lt>EOF })/> that broke L<Method::Signatures>. L<[perl #130398]|https://rt.perl.org/Public/Bug/Display.html?id=130398> =item * Fixed an assertion failure with C<chop> and C<chomp>, which could be triggered by C<chop(@x =~ tr/1/1/)>. L<[perl #130198]|https://rt.perl.org/Public/Bug/Display.html?id=130198>. =item * Fixed a comment skipping error in patterns under C</x>; it could stop skipping a byte early, which could be in the middle of a UTF-8 character. L<[perl #130495]|https://rt.perl.org/Public/Bug/Display.html?id=130495>. =item * F<perldb> now ignores F</dev/tty> on non-Unix systems. L<[perl #113960]|https://rt.perl.org/Public/Bug/Display.html?id=113960>; =item * Fix assertion failure for C<{}-E<gt>$x> when C<$x> isn't defined. L<[perl #130496]|https://rt.perl.org/Public/Bug/Display.html?id=130496>. =item * Fix an assertion error which could be triggered when a lookahead string in patterns exceeded a minimum length. L<[perl #130522]|https://rt.perl.org/Public/Bug/Display.html?id=130522>. =item * Only warn once per literal number about a misplaced C<"_">. L<[perl #70878]|https://rt.perl.org/Public/Bug/Display.html?id=70878>. =item * The C<tr///> parse code could be looking at uninitialized data after a perse error. L<[perl #129342]|https://rt.perl.org/Public/Bug/Display.html?id=129342>. =item * In a pattern match, a back-reference (C<\1>) to an unmatched capture could read back beyond the start of the string being matched. L<[perl #129377]|https://rt.perl.org/Public/Bug/Display.html?id=129377>. =item * C<use re 'strict'> is supposed to warn if you use a range (such as C</(?[ [ X-Y ] ])/>) whose start and end digit aren't from the same group of 10. It didn't do that for five groups of mathematical digits starting at C<U+1D7E>. =item * A sub containing a "forward" declaration with the same name (I<e.g.>, C<sub c { sub c; }>) could sometimes crash or loop infinitely. L<[perl #129090]|https://rt.perl.org/Public/Bug/Display.html?id=129090> =item * A crash in executing a regex with a non-anchored UTF-8 substring against a target string that also used UTF-8 has been fixed. L<[perl #129350]|https://rt.perl.org/Public/Bug/Display.html?id=129350> =item * Previously, a shebang line like C<#!perl -i u> could be erroneously interpreted as requesting the C<-u> option. This has been fixed. L<[perl #129336]|https://rt.perl.org/Public/Bug/Display.html?id=129336> =item * The regex engine was previously producing incorrect results in some rare situations when backtracking past an alternation that matches only one thing; this showed up as capture buffers (C<$1>, C<$2>, I<etc.>) erroneously containing data from regex execution paths that weren't actually executed for the final match. L<[perl #129897]|https://rt.perl.org/Public/Bug/Display.html?id=129897> =item * Certain regexes making use of the experimental C<regex_sets> feature could trigger an assertion failure. This has been fixed. L<[perl #129322]|https://rt.perl.org/Public/Bug/Display.html?id=129322> =item * Invalid assignments to a reference constructor (I<e.g.>, C<\eval=time>) could sometimes crash in addition to giving a syntax error. L<[perl #125679]|https://rt.perl.org/Public/Bug/Display.html?id=125679> =item * The parser could sometimes crash if a bareword came after C<evalbytes>. L<[perl #129196]|https://rt.perl.org/Public/Bug/Display.html?id=129196> =item * Autoloading via a method call would warn erroneously ("Use of inherited AUTOLOAD for non-method") if there was a stub present in the package into which the invocant had been blessed. The warning is no longer emitted in such circumstances. L<[perl #47047]|https://rt.perl.org/Public/Bug/Display.html?id=47047> =item * The use of C<splice> on arrays with non-existent elements could cause other operators to crash. L<[perl #129164]|https://rt.perl.org/Public/Bug/Display.html?id=129164> =item * A possible buffer overrun when a pattern contains a fixed utf8 substring. L<[perl #129012]|https://rt.perl.org/Public/Bug/Display.html?id=129012> =item * Fixed two possible use-after-free bugs in perl's lexer. L<[perl #129069]|https://rt.perl.org/Public/Bug/Display.html?id=129069> =item * Fixed a crash with C<s///l> where it thought it was dealing with UTF-8 when it wasn't. L<[perl #129038]|https://rt.perl.org/Public/Bug/Display.html?id=129038> =item * Fixed a place where the regex parser was not setting the syntax error correctly on a syntactically incorrect pattern. L<[perl #129122]|https://rt.perl.org/Public/Bug/Display.html?id=129122> =item * The C<&.> operator (and the C<"&"> operator, when it treats its arguments as strings) were failing to append a trailing null byte if at least one string was marked as utf8 internally. Many code paths (system calls, regexp compilation) still expect there to be a null byte in the string buffer just past the end of the logical string. An assertion failure was the result. L<[perl #129287]|https://rt.perl.org/Public/Bug/Display.html?id=129287> =item * Avoid a heap-after-use error in the parser when creating an error messge for a syntactically invalid heredoc. L<[perl #128988]|https://rt.perl.org/Public/Bug/Display.html?id=128988> =item * Fix a segfault when run with C<-DC> options on DEBUGGING builds. L<[perl #129106]|https://rt.perl.org/Public/Bug/Display.html?id=129106> =item * Fixed the parser error handling in subroutine attributes for an 'C<:attr(foo>' that does not have an ending 'C<")">'. =item * Fix the perl lexer to correctly handle a backslash as the last char in quoted-string context. This actually fixed two bugs, L<[perl #129064]|https://rt.perl.org/Public/Bug/Display.html?id=129064> and L<[perl #129176]|https://rt.perl.org/Public/Bug/Display.html?id=129176>. =item * In the API function C<gv_fetchmethod_pvn_flags>, rework separator parsing to prevent possible string overrun with an invalid C<len> argument. L<[perl #129267]|https://rt.perl.org/Public/Bug/Display.html?id=129267> =item * Problems with in-place array sorts: code like C<@a = sort { ... } @a>, where the source and destination of the sort are the same plain array, are optimised to do less copying around. Two side-effects of this optimisation were that the contents of C<@a> as seen by sort routines were partially sorted; and under some circumstances accessing C<@a> during the sort could crash the interpreter. Both these issues have been fixed, and Sort functions see the original value of C<@a>. L<[perl #128340]|https://rt.perl.org/Public/Bug/Display.html?id=128340> =item * Non-ASCII string delimiters are now reported correctly in error messages for unterminated strings. L<[perl #128701]|https://rt.perl.org/Public/Bug/Display.html?id=128701> =item * C<pack("p", ...)> used to emit its warning ("Attempt to pack pointer to temporary value") erroneously in some cases, but has been fixed. =item * C<@DB::args> is now exempt from "used once" warnings. The warnings only occurred under B<-w>, because F<warnings.pm> itself uses C<@DB::args> multiple times. =item * The use of built-in arrays or hash slices in a double-quoted string no longer issues a warning ("Possible unintended interpolation...") if the variable has not been mentioned before. This affected code like C<qq|@DB::args|> and C<qq|@SIG{'CHLD', 'HUP'}|>. (The special variables C<@-> and C<@+> were already exempt from the warning.) =item * C<gethostent> and similar functions now perform a null check internally, to avoid crashing with the torsocks library. This was a regression from v5.22. L<[perl #128740]|https://rt.perl.org/Public/Bug/Display.html?id=128740> =item * C<defined *{'!'}>, C<defined *{'['}>, and C<defined *{'-'}> no longer leak memory if the typeglob in question has never been accessed before. =item * Mentioning the same constant twice in a row (which is a syntax error) no longer fails an assertion under debugging builds. This was a regression from v5.20. L<[perl #126482]|https://rt.perl.org/Public/Bug/Display.html?id=126482> =item * Many issues relating to C<printf "%a"> of hexadecimal floating point were fixed. In addition, the "subnormals" (formerly known as "denormals") floating point numbers are now supported both with the plain IEEE 754 floating point numbers (64-bit or 128-bit) and the x86 80-bit "extended precision". Note that subnormal hexadecimal floating point literals will give a warning about "exponent underflow". L<[perl #128843]|https://rt.perl.org/Public/Bug/Display.html?id=128843> L<[perl #128889]|https://rt.perl.org/Public/Bug/Display.html?id=128889> L<[perl #128890]|https://rt.perl.org/Public/Bug/Display.html?id=128890> L<[perl #128893]|https://rt.perl.org/Public/Bug/Display.html?id=128893> L<[perl #128909]|https://rt.perl.org/Public/Bug/Display.html?id=128909> L<[perl #128919]|https://rt.perl.org/Public/Bug/Display.html?id=128919> =item * A regression in v5.24 with C<tr/\N{U+...}/foo/> when the code point was between 128 and 255 has been fixed. L<[perl #128734]|https://rt.perl.org/Public/Bug/Display.html?id=128734>. =item * Use of a string delimiter whose code point is above 2**31 now works correctly on platforms that allow this. Previously, certain characters, due to truncation, would be confused with other delimiter characters with special meaning (such as C<"?"> in C<m?...?>), resulting in inconsistent behaviour. Note that this is non-portable, and is based on Perl's extension to UTF-8, and is probably not displayable nor enterable by any editor. L<[perl #128738]|https://rt.perl.org/Public/Bug/Display.html?id=128738> =item * C<@{x> followed by a newline where C<"x"> represents a control or non-ASCII character no longer produces a garbled syntax error message or a crash. L<[perl #128951]|https://rt.perl.org/Public/Bug/Display.html?id=128951> =item * An assertion failure with C<%: = 0> has been fixed. L<[perl #128238]|https://rt.perl.org/Public/Bug/Display.html?id=128238> =item * In Perl 5.18, the parsing of C<"$foo::$bar"> was accidentally changed, such that it would be treated as C<$foo."::".$bar>. The previous behavior, which was to parse it as C<$foo:: . $bar>, has been restored. L<[perl #128478]|https://rt.perl.org/Public/Bug/Display.html?id=128478> =item * Since Perl 5.20, line numbers have been off by one when perl is invoked with the B<-x> switch. This has been fixed. L<[perl #128508]|https://rt.perl.org/Public/Bug/Display.html?id=128508> =item * Vivifying a subroutine stub in a deleted stash (I<e.g.>, C<delete $My::{"Foo::"}; \&My::Foo::foo>) no longer crashes. It had begun crashing in Perl 5.18. L<[perl #128532]|https://rt.perl.org/Public/Bug/Display.html?id=128532> =item * Some obscure cases of subroutines and file handles being freed at the same time could result in crashes, but have been fixed. The crash was introduced in Perl 5.22. L<[perl #128597]|https://rt.perl.org/Public/Bug/Display.html?id=128597> =item * Code that looks for a variable name associated with an uninitialized value could cause an assertion failure in cases where magic is involved, such as C<$ISA[0][0]>. This has now been fixed. L<[perl #128253]|https://rt.perl.org/Public/Bug/Display.html?id=128253> =item * A crash caused by code generating the warning "Subroutine STASH::NAME redefined" in cases such as C<sub P::f{} undef *P::; *P::f =sub{};> has been fixed. In these cases, where the STASH is missing, the warning will now appear as "Subroutine NAME redefined". L<[perl #128257]|https://rt.perl.org/Public/Bug/Display.html?id=128257> =item * Fixed an assertion triggered by some code that handles deprecated behavior in formats, I<e.g.>, in cases like this: format STDOUT = @ 0"$x" L<[perl #128255]|https://rt.perl.org/Public/Bug/Display.html?id=128255> =item * A possible divide by zero in string transformation code on Windows has been avoided, fixing a crash when collating an empty string. L<[perl #128618]|https://rt.perl.org/Public/Bug/Display.html?id=128618> =item * Some regular expression parsing glitches could lead to assertion failures with regular expressions such as C</(?E<lt>=/> and C</(?E<lt>!/>. This has now been fixed. L<[perl #128170]|https://rt.perl.org/Public/Bug/Display.html?id=128170> =item * C< until ($x = 1) { ... } > and C< ... until $x = 1 > now properly warn when syntax warnings are enabled. L<[perl #127333]|https://rt.perl.org/Public/Bug/Display.html?id=127333> =item * socket() now leaves the error code returned by the system in C<$!> on failure. L<[perl #128316]|https://rt.perl.org/Public/Bug/Display.html?id=128316> =item * Assignment variants of any bitwise ops under the C<bitwise> feature would crash if the left-hand side was an array or hash. L<[perl #128204]|https://rt.perl.org/Public/Bug/Display.html?id=128204> =item * C<require> followed by a single colon (as in C<foo() ? require : ...> is now parsed correctly as C<require> with implicit C<$_>, rather than C<require "">. L<[perl #128307]|https://rt.perl.org/Public/Bug/Display.html?id=128307> =item * Scalar C<keys %hash> can now be assigned to consistently in all scalar lvalue contexts. Previously it worked for some contexts but not others. =item * List assignment to C<vec> or C<substr> with an array or hash for its first argument used to result in crashes or "Can't coerce" error messages at run time, unlike scalar assignment, which would give an error at compile time. List assignment now gives a compile-time error, too. L<[perl #128260]|https://rt.perl.org/Public/Bug/Display.html?id=128260> =item * Expressions containing an C<&&> or C<||> operator (or their synonyms C<and> and C<or>) were being compiled incorrectly in some cases. If the left-hand side consisted of either a negated bareword constant or a negated C<do {}> block containing a constant expression, and the right-hand side consisted of a negated non-foldable expression, one of the negations was effectively ignored. The same was true of C<if> and C<unless> statement modifiers, though with the left-hand and right-hand sides swapped. This long-standing bug has now been fixed. L<[perl #127952]|https://rt.perl.org/Public/Bug/Display.html?id=127952> =item * C<reset> with an argument no longer crashes when encountering stash entries other than globs. L<[perl #128106]|https://rt.perl.org/Public/Bug/Display.html?id=128106> =item * Assignment of hashes to, and deletion of, typeglobs named C<*::::::> no longer causes crashes. L<[perl #128086]|https://rt.perl.org/Public/Bug/Display.html?id=128086> =item * Perl wasn't correctly handling true/false values in the LHS of a list assign; specifically the truth values returned by boolean operators. This could trigger an assertion failure in something like the following: for ($x > $y) { ($_, ...) = (...); # here $_ is aliased to a truth value } This was a regression from v5.24. L<[perl #129991]|https://rt.perl.org/Public/Bug/Display.html?id=129991> =item * Assertion failure with user-defined Unicode-like properties. L<[perl #130010]|https://rt.perl.org/Public/Bug/Display.html?id=130010> =item * Fix error message for unclosed C<\N{> in a regex. An unclosed C<\N{> could give the wrong error message: C<"\N{NAME} must be resolved by the lexer">. =item * List assignment in list context where the LHS contained aggregates and where there were not enough RHS elements, used to skip scalar lvalues. Previously, C<(($a,$b,@c,$d) = (1))> in list context returned C<($a)>; now it returns C<($a,$b,$d)>. C<(($a,$b,$c) = (1))> is unchanged: it still returns C<($a,$b,$c)>. This can be seen in the following: sub inc { $_++ for @_ } inc(($a,$b,@c,$d) = (10)) Formerly, the values of C<($a,$b,$d)> would be left as C<(11,undef,undef)>; now they are C<(11,1,1)>. =item * Code like this: C</(?{ s!!! })/> could trigger infinite recursion on the C stack (not the normal perl stack) when the last successful pattern in scope is itself. We avoid the segfault by simply forbidding the use of the empty pattern when it would resolve to the currently executing pattern. L<[perl #129903]|https://rt.perl.org/Public/Bug/Display.html?id=129903> =item * Avoid reading beyond the end of the line buffer in perl's lexer when there's a short UTF-8 character at the end. L<[perl #128997]|https://rt.perl.org/Public/Bug/Display.html?id=128997> =item * Alternations in regular expressions were sometimes failing to match a utf8 string against a utf8 alternate. L<[perl #129950]|https://rt.perl.org/Public/Bug/Display.html?id=129950> =item * Make C<do "a\0b"> fail silently (and return C<undef> and set C<$!>) instead of throwing an error. L<[perl #129928]|https://rt.perl.org/Public/Bug/Display.html?id=129928> =item * C<chdir> with no argument didn't ensure that there was stack space available for returning its result. L<[perl #129130]|https://rt.perl.org/Public/Bug/Display.html?id=129130> =item * All error messages related to C<do> now refer to C<do>; some formerly claimed to be from C<require> instead. =item * Executing C<undef $x> where C<$x> is tied or magical no longer incorrectly blames the variable for an uninitialized-value warning encountered by the tied/magical code. =item * Code like C<$x = $x . "a"> was incorrectly failing to yield a L<use of uninitialized value|perldiag/"Use of uninitialized value%s"> warning when C<$x> was a lexical variable with an undefined value. That has now been fixed. L<[perl #127877]|https://rt.perl.org/Public/Bug/Display.html?id=127877> =item * C<undef *_; shift> or C<undef *_; pop> inside a subroutine, with no argument to C<shift> or C<pop>, began crashing in Perl 5.14, but has now been fixed. =item * C<< "string$scalar-E<gt>$*" >> now correctly prefers concatenation overloading to string overloading if C<< $scalar-E<gt>$* >> returns an overloaded object, bringing it into consistency with C<$$scalar>. =item * C<< /@0{0*-E<gt>@*/*0 >> and similar contortions used to crash, but no longer do, but merely produce a syntax error. L<[perl #128171]|https://rt.perl.org/Public/Bug/Display.html?id=128171> =item * C<do> or C<require> with an argument which is a reference or typeglob which, when stringified, contains a null character, started crashing in Perl 5.20, but has now been fixed. L<[perl #128182]|https://rt.perl.org/Public/Bug/Display.html?id=128182> =item * Improve the error message for a missing C<tie()> package/method. This brings the error messages in line with the ones used for normal method calls. =item * Parsing bad POSIX charclasses no longer leaks memory. L<[perl #128313]|https://rt.perl.org/Public/Bug/Display.html?id=128313> =back =head1 Known Problems =over 4 =item * G++ 6 handles subnormal (denormal) floating point values differently than gcc 6 or g++ 5 resulting in "flush-to-zero". The end result is that if you specify very small values using the hexadecimal floating point format, like C<0x1.fffffffffffffp-1022>, they become zeros. L<[perl #131388]|https://rt.perl.org/Ticket/Display.html?id=131388> =back =head1 Errata From Previous Releases =over 4 =item * Fixed issues with recursive regexes. The behavior was fixed in Perl 5.24. L<[perl #126182]|https://rt.perl.org/Public/Bug/Display.html?id=126182> =back =head1 Obituary Jon Portnoy (AVENJ), a prolific Perl author and admired Gentoo community member, has passed away on August 10, 2016. He will be remembered and missed by all those who he came in contact with, and enriched with his intellect, wit, and spirit. It is with great sadness that we also note Kip Hampton's passing. Probably best known as the author of the Perl & XML column on XML.com, he was a core contributor to AxKit, an XML server platform that became an Apache Foundation project. He was a frequent speaker in the early days at OSCON, and most recently at YAPC::NA in Madison. He was frequently on irc.perl.org as ubu, generally in the #axkit-dahut community, the group responsible for YAPC::NA Asheville in 2011. Kip and his constant contributions to the community will be greatly missed. =head1 Acknowledgements Perl 5.26.0 represents approximately 13 months of development since Perl 5.24.0 and contains approximately 360,000 lines of changes across 2,600 files from 86 authors. Excluding auto-generated files, documentation and release tools, there were approximately 230,000 lines of changes to 1,800 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.26.0: Aaron Crane, Abigail, Ævar Arnfjörð Bjarmason, Alex Vandiver, Andreas König, Andreas Voegele, Andrew Fresh, Andy Lester, Aristotle Pagaltzis, Chad Granum, Chase Whitener, Chris 'BinGOs' Williams, Chris Lamb, Christian Hansen, Christian Millour, Colin Newell, Craig A. Berry, Dagfinn Ilmari Mannsåker, Dan Collins, Daniel Dragan, Dave Cross, Dave Rolsky, David Golden, David H. Gutteridge, David Mitchell, Dominic Hargreaves, Doug Bell, E. Choroba, Ed Avis, Father Chrysostomos, François Perrad, Hauke D, H.Merijn Brand, Hugo van der Sanden, Ivan Pozdeev, James E Keenan, James Raspass, Jarkko Hietaniemi, Jerry D. Hedden, Jim Cromie, J. Nick Koston, John Lightsey, Karen Etheridge, Karl Williamson, Leon Timmermans, Lukas Mai, Matthew Horsfall, Maxwell Carey, Misty De Meo, Neil Bowers, Nicholas Clark, Nicolas R., Niko Tyni, Pali, Paul Marquess, Peter Avalos, Petr Písař, Pino Toscano, Rafael Garcia-Suarez, Reini Urban, Renee Baecker, Ricardo Signes, Richard Levitte, Rick Delaney, Salvador Fandiño, Samuel Thibault, Sawyer X, Sébastien Aperghis-Tramoni, Sergey Aleynikov, Shlomi Fish, Smylers, Stefan Seifert, Steffen Müller, Stevan Little, Steve Hay, Steven Humphrey, Sullivan Beck, Theo Buehler, Thomas Sibley, Todd Rinaldo, Tomasz Konojacki, Tony Cook, Unicode Consortium, Yaroslav Kuzmin, Yves Orton, Zefram. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the perl bug database at L<https://rt.perl.org/>. There may also be information at L<http://www.perl.org/>, the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to C<perlbug@perl.org> to be analysed by the Perl porting team. If the bug you are reporting has security implications which make it inappropriate to send to a publicly archived mailing list, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 Give Thanks If you wish to thank the Perl 5 Porters for the work we had done in Perl 5, you can do so by running the C<perlthanks> program: perlthanks This will send an email to the Perl 5 Porters list with your show of thanks. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlrebackslash.pod 0000644 00000077035 15125556335 0010443 0 ustar 00 =head1 NAME perlrebackslash - Perl Regular Expression Backslash Sequences and Escapes =head1 DESCRIPTION The top level documentation about Perl regular expressions is found in L<perlre>. This document describes all backslash and escape sequences. After explaining the role of the backslash, it lists all the sequences that have a special meaning in Perl regular expressions (in alphabetical order), then describes each of them. Most sequences are described in detail in different documents; the primary purpose of this document is to have a quick reference guide describing all backslash and escape sequences. =head2 The backslash In a regular expression, the backslash can perform one of two tasks: it either takes away the special meaning of the character following it (for instance, C<\|> matches a vertical bar, it's not an alternation), or it is the start of a backslash or escape sequence. The rules determining what it is are quite simple: if the character following the backslash is an ASCII punctuation (non-word) character (that is, anything that is not a letter, digit, or underscore), then the backslash just takes away any special meaning of the character following it. If the character following the backslash is an ASCII letter or an ASCII digit, then the sequence may be special; if so, it's listed below. A few letters have not been used yet, so escaping them with a backslash doesn't change them to be special. A future version of Perl may assign a special meaning to them, so if you have warnings turned on, Perl issues a warning if you use such a sequence. [1]. It is however guaranteed that backslash or escape sequences never have a punctuation character following the backslash, not now, and not in a future version of Perl 5. So it is safe to put a backslash in front of a non-word character. Note that the backslash itself is special; if you want to match a backslash, you have to escape the backslash with a backslash: C</\\/> matches a single backslash. =over 4 =item [1] There is one exception. If you use an alphanumeric character as the delimiter of your pattern (which you probably shouldn't do for readability reasons), you have to escape the delimiter if you want to match it. Perl won't warn then. See also L<perlop/Gory details of parsing quoted constructs>. =back =head2 All the sequences and escapes Those not usable within a bracketed character class (like C<[\da-z]>) are marked as C<Not in [].> \000 Octal escape sequence. See also \o{}. \1 Absolute backreference. Not in []. \a Alarm or bell. \A Beginning of string. Not in []. \b{}, \b Boundary. (\b is a backspace in []). \B{}, \B Not a boundary. Not in []. \cX Control-X. \d Match any digit character. \D Match any character that isn't a digit. \e Escape character. \E Turn off \Q, \L and \U processing. Not in []. \f Form feed. \F Foldcase till \E. Not in []. \g{}, \g1 Named, absolute or relative backreference. Not in []. \G Pos assertion. Not in []. \h Match any horizontal whitespace character. \H Match any character that isn't horizontal whitespace. \k{}, \k<>, \k'' Named backreference. Not in []. \K Keep the stuff left of \K. Not in []. \l Lowercase next character. Not in []. \L Lowercase till \E. Not in []. \n (Logical) newline character. \N Match any character but newline. Not in []. \N{} Named or numbered (Unicode) character or sequence. \o{} Octal escape sequence. \p{}, \pP Match any character with the given Unicode property. \P{}, \PP Match any character without the given property. \Q Quote (disable) pattern metacharacters till \E. Not in []. \r Return character. \R Generic new line. Not in []. \s Match any whitespace character. \S Match any character that isn't a whitespace. \t Tab character. \u Titlecase next character. Not in []. \U Uppercase till \E. Not in []. \v Match any vertical whitespace character. \V Match any character that isn't vertical whitespace \w Match any word character. \W Match any character that isn't a word character. \x{}, \x00 Hexadecimal escape sequence. \X Unicode "extended grapheme cluster". Not in []. \z End of string. Not in []. \Z End of string. Not in []. =head2 Character Escapes =head3 Fixed characters A handful of characters have a dedicated I<character escape>. The following table shows them, along with their ASCII code points (in decimal and hex), their ASCII name, the control escape on ASCII platforms and a short description. (For EBCDIC platforms, see L<perlebcdic/OPERATOR DIFFERENCES>.) Seq. Code Point ASCII Cntrl Description. Dec Hex \a 7 07 BEL \cG alarm or bell \b 8 08 BS \cH backspace [1] \e 27 1B ESC \c[ escape character \f 12 0C FF \cL form feed \n 10 0A LF \cJ line feed [2] \r 13 0D CR \cM carriage return \t 9 09 TAB \cI tab =over 4 =item [1] C<\b> is the backspace character only inside a character class. Outside a character class, C<\b> alone is a word-character/non-word-character boundary, and C<\b{}> is some other type of boundary. =item [2] C<\n> matches a logical newline. Perl converts between C<\n> and your OS's native newline character when reading from or writing to text files. =back =head4 Example $str =~ /\t/; # Matches if $str contains a (horizontal) tab. =head3 Control characters C<\c> is used to denote a control character; the character following C<\c> determines the value of the construct. For example the value of C<\cA> is C<chr(1)>, and the value of C<\cb> is C<chr(2)>, etc. The gory details are in L<perlop/"Regexp Quote-Like Operators">. A complete list of what C<chr(1)>, etc. means for ASCII and EBCDIC platforms is in L<perlebcdic/OPERATOR DIFFERENCES>. Note that C<\c\> alone at the end of a regular expression (or doubled-quoted string) is not valid. The backslash must be followed by another character. That is, C<\c\I<X>> means C<chr(28) . 'I<X>'> for all characters I<X>. To write platform-independent code, you must use C<\N{I<NAME>}> instead, like C<\N{ESCAPE}> or C<\N{U+001B}>, see L<charnames>. Mnemonic: I<c>ontrol character. =head4 Example $str =~ /\cK/; # Matches if $str contains a vertical tab (control-K). =head3 Named or numbered characters and character sequences Unicode characters have a Unicode name and numeric code point (ordinal) value. Use the C<\N{}> construct to specify a character by either of these values. Certain sequences of characters also have names. To specify by name, the name of the character or character sequence goes between the curly braces. To specify a character by Unicode code point, use the form C<\N{U+I<code point>}>, where I<code point> is a number in hexadecimal that gives the code point that Unicode has assigned to the desired character. It is customary but not required to use leading zeros to pad the number to 4 digits. Thus C<\N{U+0041}> means C<LATIN CAPITAL LETTER A>, and you will rarely see it written without the two leading zeros. C<\N{U+0041}> means "A" even on EBCDIC machines (where the ordinal value of "A" is not 0x41). It is even possible to give your own names to characters and character sequences by using the L<charnames> module. These custom names are lexically scoped, and so a given code point may have different names in different scopes. The name used is what is in effect at the time the C<\N{}> is expanded. For patterns in double-quotish context, that means at the time the pattern is parsed. But for patterns that are delimitted by single quotes, the expansion is deferred until pattern compilation time, which may very well have a different C<charnames> translator in effect. (There is an expanded internal form that you may see in debug output: C<\N{U+I<code point>.I<code point>...}>. The C<...> means any number of these I<code point>s separated by dots. This represents the sequence formed by the characters. This is an internal form only, subject to change, and you should not try to use it yourself.) Mnemonic: I<N>amed character. Note that a character or character sequence expressed as a named or numbered character is considered a character without special meaning by the regex engine, and will match "as is". =head4 Example $str =~ /\N{THAI CHARACTER SO SO}/; # Matches the Thai SO SO character use charnames 'Cyrillic'; # Loads Cyrillic names. $str =~ /\N{ZHE}\N{KA}/; # Match "ZHE" followed by "KA". =head3 Octal escapes There are two forms of octal escapes. Each is used to specify a character by its code point specified in octal notation. One form, available starting in Perl 5.14 looks like C<\o{...}>, where the dots represent one or more octal digits. It can be used for any Unicode character. It was introduced to avoid the potential problems with the other form, available in all Perls. That form consists of a backslash followed by three octal digits. One problem with this form is that it can look exactly like an old-style backreference (see L</Disambiguation rules between old-style octal escapes and backreferences> below.) You can avoid this by making the first of the three digits always a zero, but that makes \077 the largest code point specifiable. In some contexts, a backslash followed by two or even one octal digits may be interpreted as an octal escape, sometimes with a warning, and because of some bugs, sometimes with surprising results. Also, if you are creating a regex out of smaller snippets concatenated together, and you use fewer than three digits, the beginning of one snippet may be interpreted as adding digits to the ending of the snippet before it. See L</Absolute referencing> for more discussion and examples of the snippet problem. Note that a character expressed as an octal escape is considered a character without special meaning by the regex engine, and will match "as is". To summarize, the C<\o{}> form is always safe to use, and the other form is safe to use for code points through \077 when you use exactly three digits to specify them. Mnemonic: I<0>ctal or I<o>ctal. =head4 Examples (assuming an ASCII platform) $str = "Perl"; $str =~ /\o{120}/; # Match, "\120" is "P". $str =~ /\120/; # Same. $str =~ /\o{120}+/; # Match, "\120" is "P", # it's repeated at least once. $str =~ /\120+/; # Same. $str =~ /P\053/; # No match, "\053" is "+" and taken literally. /\o{23073}/ # Black foreground, white background smiling face. /\o{4801234567}/ # Raises a warning, and yields chr(4). =head4 Disambiguation rules between old-style octal escapes and backreferences Octal escapes of the C<\000> form outside of bracketed character classes potentially clash with old-style backreferences (see L</Absolute referencing> below). They both consist of a backslash followed by numbers. So Perl has to use heuristics to determine whether it is a backreference or an octal escape. Perl uses the following rules to disambiguate: =over 4 =item 1 If the backslash is followed by a single digit, it's a backreference. =item 2 If the first digit following the backslash is a 0, it's an octal escape. =item 3 If the number following the backslash is N (in decimal), and Perl already has seen N capture groups, Perl considers this a backreference. Otherwise, it considers it an octal escape. If N has more than three digits, Perl takes only the first three for the octal escape; the rest are matched as is. my $pat = "(" x 999; $pat .= "a"; $pat .= ")" x 999; /^($pat)\1000$/; # Matches 'aa'; there are 1000 capture groups. /^$pat\1000$/; # Matches 'a@0'; there are 999 capture groups # and \1000 is seen as \100 (a '@') and a '0'. =back You can force a backreference interpretation always by using the C<\g{...}> form. You can the force an octal interpretation always by using the C<\o{...}> form, or for numbers up through \077 (= 63 decimal), by using three digits, beginning with a "0". =head3 Hexadecimal escapes Like octal escapes, there are two forms of hexadecimal escapes, but both start with the sequence C<\x>. This is followed by either exactly two hexadecimal digits forming a number, or a hexadecimal number of arbitrary length surrounded by curly braces. The hexadecimal number is the code point of the character you want to express. Note that a character expressed as one of these escapes is considered a character without special meaning by the regex engine, and will match "as is". Mnemonic: heI<x>adecimal. =head4 Examples (assuming an ASCII platform) $str = "Perl"; $str =~ /\x50/; # Match, "\x50" is "P". $str =~ /\x50+/; # Match, "\x50" is "P", it is repeated at least once $str =~ /P\x2B/; # No match, "\x2B" is "+" and taken literally. /\x{2603}\x{2602}/ # Snowman with an umbrella. # The Unicode character 2603 is a snowman, # the Unicode character 2602 is an umbrella. /\x{263B}/ # Black smiling face. /\x{263b}/ # Same, the hex digits A - F are case insensitive. =head2 Modifiers A number of backslash sequences have to do with changing the character, or characters following them. C<\l> will lowercase the character following it, while C<\u> will uppercase (or, more accurately, titlecase) the character following it. They provide functionality similar to the functions C<lcfirst> and C<ucfirst>. To uppercase or lowercase several characters, one might want to use C<\L> or C<\U>, which will lowercase/uppercase all characters following them, until either the end of the pattern or the next occurrence of C<\E>, whichever comes first. They provide functionality similar to what the functions C<lc> and C<uc> provide. C<\Q> is used to quote (disable) pattern metacharacters, up to the next C<\E> or the end of the pattern. C<\Q> adds a backslash to any character that could have special meaning to Perl. In the ASCII range, it quotes every character that isn't a letter, digit, or underscore. See L<perlfunc/quotemeta> for details on what gets quoted for non-ASCII code points. Using this ensures that any character between C<\Q> and C<\E> will be matched literally, not interpreted as a metacharacter by the regex engine. C<\F> can be used to casefold all characters following, up to the next C<\E> or the end of the pattern. It provides the functionality similar to the C<fc> function. Mnemonic: I<L>owercase, I<U>ppercase, I<F>old-case, I<Q>uotemeta, I<E>nd. =head4 Examples $sid = "sid"; $greg = "GrEg"; $miranda = "(Miranda)"; $str =~ /\u$sid/; # Matches 'Sid' $str =~ /\L$greg/; # Matches 'greg' $str =~ /\Q$miranda\E/; # Matches '(Miranda)', as if the pattern # had been written as /\(Miranda\)/ =head2 Character classes Perl regular expressions have a large range of character classes. Some of the character classes are written as a backslash sequence. We will briefly discuss those here; full details of character classes can be found in L<perlrecharclass>. C<\w> is a character class that matches any single I<word> character (letters, digits, Unicode marks, and connector punctuation (like the underscore)). C<\d> is a character class that matches any decimal digit, while the character class C<\s> matches any whitespace character. New in perl 5.10.0 are the classes C<\h> and C<\v> which match horizontal and vertical whitespace characters. The exact set of characters matched by C<\d>, C<\s>, and C<\w> varies depending on various pragma and regular expression modifiers. It is possible to restrict the match to the ASCII range by using the C</a> regular expression modifier. See L<perlrecharclass>. The uppercase variants (C<\W>, C<\D>, C<\S>, C<\H>, and C<\V>) are character classes that match, respectively, any character that isn't a word character, digit, whitespace, horizontal whitespace, or vertical whitespace. Mnemonics: I<w>ord, I<d>igit, I<s>pace, I<h>orizontal, I<v>ertical. =head3 Unicode classes C<\pP> (where C<P> is a single letter) and C<\p{Property}> are used to match a character that matches the given Unicode property; properties include things like "letter", or "thai character". Capitalizing the sequence to C<\PP> and C<\P{Property}> make the sequence match a character that doesn't match the given Unicode property. For more details, see L<perlrecharclass/Backslash sequences> and L<perlunicode/Unicode Character Properties>. Mnemonic: I<p>roperty. =head2 Referencing If capturing parenthesis are used in a regular expression, we can refer to the part of the source string that was matched, and match exactly the same thing. There are three ways of referring to such I<backreference>: absolutely, relatively, and by name. =for later add link to perlrecapture =head3 Absolute referencing Either C<\gI<N>> (starting in Perl 5.10.0), or C<\I<N>> (old-style) where I<N> is a positive (unsigned) decimal number of any length is an absolute reference to a capturing group. I<N> refers to the Nth set of parentheses, so C<\gI<N>> refers to whatever has been matched by that set of parentheses. Thus C<\g1> refers to the first capture group in the regex. The C<\gI<N>> form can be equivalently written as C<\g{I<N>}> which avoids ambiguity when building a regex by concatenating shorter strings. Otherwise if you had a regex C<qr/$a$b/>, and C<$a> contained C<"\g1">, and C<$b> contained C<"37">, you would get C</\g137/> which is probably not what you intended. In the C<\I<N>> form, I<N> must not begin with a "0", and there must be at least I<N> capturing groups, or else I<N> is considered an octal escape (but something like C<\18> is the same as C<\0018>; that is, the octal escape C<"\001"> followed by a literal digit C<"8">). Mnemonic: I<g>roup. =head4 Examples /(\w+) \g1/; # Finds a duplicated word, (e.g. "cat cat"). /(\w+) \1/; # Same thing; written old-style. /(.)(.)\g2\g1/; # Match a four letter palindrome (e.g. "ABBA"). =head3 Relative referencing C<\g-I<N>> (starting in Perl 5.10.0) is used for relative addressing. (It can be written as C<\g{-I<N>}>.) It refers to the I<N>th group before the C<\g{-I<N>}>. The big advantage of this form is that it makes it much easier to write patterns with references that can be interpolated in larger patterns, even if the larger pattern also contains capture groups. =head4 Examples /(A) # Group 1 ( # Group 2 (B) # Group 3 \g{-1} # Refers to group 3 (B) \g{-3} # Refers to group 1 (A) ) /x; # Matches "ABBA". my $qr = qr /(.)(.)\g{-2}\g{-1}/; # Matches 'abab', 'cdcd', etc. /$qr$qr/ # Matches 'ababcdcd'. =head3 Named referencing C<\g{I<name>}> (starting in Perl 5.10.0) can be used to back refer to a named capture group, dispensing completely with having to think about capture buffer positions. To be compatible with .Net regular expressions, C<\g{name}> may also be written as C<\k{name}>, C<< \k<name> >> or C<\k'name'>. To prevent any ambiguity, I<name> must not start with a digit nor contain a hyphen. =head4 Examples /(?<word>\w+) \g{word}/ # Finds duplicated word, (e.g. "cat cat") /(?<word>\w+) \k{word}/ # Same. /(?<word>\w+) \k<word>/ # Same. /(?<letter1>.)(?<letter2>.)\g{letter2}\g{letter1}/ # Match a four letter palindrome (e.g. "ABBA") =head2 Assertions Assertions are conditions that have to be true; they don't actually match parts of the substring. There are six assertions that are written as backslash sequences. =over 4 =item \A C<\A> only matches at the beginning of the string. If the C</m> modifier isn't used, then C</\A/> is equivalent to C</^/>. However, if the C</m> modifier is used, then C</^/> matches internal newlines, but the meaning of C</\A/> isn't changed by the C</m> modifier. C<\A> matches at the beginning of the string regardless whether the C</m> modifier is used. =item \z, \Z C<\z> and C<\Z> match at the end of the string. If the C</m> modifier isn't used, then C</\Z/> is equivalent to C</$/>; that is, it matches at the end of the string, or one before the newline at the end of the string. If the C</m> modifier is used, then C</$/> matches at internal newlines, but the meaning of C</\Z/> isn't changed by the C</m> modifier. C<\Z> matches at the end of the string (or just before a trailing newline) regardless whether the C</m> modifier is used. C<\z> is just like C<\Z>, except that it does not match before a trailing newline. C<\z> matches at the end of the string only, regardless of the modifiers used, and not just before a newline. It is how to anchor the match to the true end of the string under all conditions. =item \G C<\G> is usually used only in combination with the C</g> modifier. If the C</g> modifier is used and the match is done in scalar context, Perl remembers where in the source string the last match ended, and the next time, it will start the match from where it ended the previous time. C<\G> matches the point where the previous match on that string ended, or the beginning of that string if there was no previous match. =for later add link to perlremodifiers Mnemonic: I<G>lobal. =item \b{}, \b, \B{}, \B C<\b{...}>, available starting in v5.22, matches a boundary (between two characters, or before the first character of the string, or after the final character of the string) based on the Unicode rules for the boundary type specified inside the braces. The boundary types are given a few paragraphs below. C<\B{...}> matches at any place between characters where C<\b{...}> of the same type doesn't match. C<\b> when not immediately followed by a C<"{"> matches at any place between a word (something matched by C<\w>) and a non-word character (C<\W>); C<\B> when not immediately followed by a C<"{"> matches at any place between characters where C<\b> doesn't match. To get better word matching of natural language text, see L</\b{wb}> below. C<\b> and C<\B> assume there's a non-word character before the beginning and after the end of the source string; so C<\b> will match at the beginning (or end) of the source string if the source string begins (or ends) with a word character. Otherwise, C<\B> will match. Do not use something like C<\b=head\d\b> and expect it to match the beginning of a line. It can't, because for there to be a boundary before the non-word "=", there must be a word character immediately previous. All plain C<\b> and C<\B> boundary determinations look for word characters alone, not for non-word characters nor for string ends. It may help to understand how C<\b> and C<\B> work by equating them as follows: \b really means (?:(?<=\w)(?!\w)|(?<!\w)(?=\w)) \B really means (?:(?<=\w)(?=\w)|(?<!\w)(?!\w)) In contrast, C<\b{...}> and C<\B{...}> may or may not match at the beginning and end of the line, depending on the boundary type. These implement the Unicode default boundaries, specified in L<https://www.unicode.org/reports/tr14/> and L<https://www.unicode.org/reports/tr29/>. The boundary types are: =over =item C<\b{gcb}> or C<\b{g}> This matches a Unicode "Grapheme Cluster Boundary". (Actually Perl always uses the improved "extended" grapheme cluster"). These are explained below under L</C<\X>>. In fact, C<\X> is another way to get the same functionality. It is equivalent to C</.+?\b{gcb}/>. Use whichever is most convenient for your situation. =item C<\b{lb}> This matches according to the default Unicode Line Breaking Algorithm (L<https://www.unicode.org/reports/tr14/>), as customized in that document (L<Example 7 of revision 35|https://www.unicode.org/reports/tr14/tr14-35.html#Example7>) for better handling of numeric expressions. This is suitable for many purposes, but the L<Unicode::LineBreak> module is available on CPAN that provides many more features, including customization. =item C<\b{sb}> This matches a Unicode "Sentence Boundary". This is an aid to parsing natural language sentences. It gives good, but imperfect results. For example, it thinks that "Mr. Smith" is two sentences. More details are at L<https://www.unicode.org/reports/tr29/>. Note also that it thinks that anything matching L</\R> (except form feed and vertical tab) is a sentence boundary. C<\b{sb}> works with text designed for word-processors which wrap lines automatically for display, but hard-coded line boundaries are considered to be essentially the ends of text blocks (paragraphs really), and hence the ends of sentences. C<\b{sb}> doesn't do well with text containing embedded newlines, like the source text of the document you are reading. Such text needs to be preprocessed to get rid of the line separators before looking for sentence boundaries. Some people view this as a bug in the Unicode standard, and this behavior is quite subject to change in future Perl versions. =item C<\b{wb}> This matches a Unicode "Word Boundary", but tailored to Perl expectations. This gives better (though not perfect) results for natural language processing than plain C<\b> (without braces) does. For example, it understands that apostrophes can be in the middle of words and that parentheses aren't (see the examples below). More details are at L<https://www.unicode.org/reports/tr29/>. The current Unicode definition of a Word Boundary matches between every white space character. Perl tailors this, starting in version 5.24, to generally not break up spans of white space, just as plain C<\b> has always functioned. This allows C<\b{wb}> to be a drop-in replacement for C<\b>, but with generally better results for natural language processing. (The exception to this tailoring is when a span of white space is immediately followed by something like U+0303, COMBINING TILDE. If the final space character in the span is a horizontal white space, it is broken out so that it attaches instead to the combining character. To be precise, if a span of white space that ends in a horizontal space has the character immediately following it have any of the Word Boundary property values "Extend", "Format" or "ZWJ", the boundary between the final horizontal space character and the rest of the span matches C<\b{wb}>. In all other cases the boundary between two white space characters matches C<\B{wb}>.) =back It is important to realize when you use these Unicode boundaries, that you are taking a risk that a future version of Perl which contains a later version of the Unicode Standard will not work precisely the same way as it did when your code was written. These rules are not considered stable and have been somewhat more subject to change than the rest of the Standard. Unicode reserves the right to change them at will, and Perl reserves the right to update its implementation to Unicode's new rules. In the past, some changes have been because new characters have been added to the Standard which have different characteristics than all previous characters, so new rules are formulated for handling them. These should not cause any backward compatibility issues. But some changes have changed the treatment of existing characters because the Unicode Technical Committee has decided that the change is warranted for whatever reason. This could be to fix a bug, or because they think better results are obtained with the new rule. It is also important to realize that these are default boundary definitions, and that implementations may wish to tailor the results for particular purposes and locales. For example, some languages, such as Japanese and Thai, require dictionary lookup to accurately determine word boundaries. Mnemonic: I<b>oundary. =back =head4 Examples "cat" =~ /\Acat/; # Match. "cat" =~ /cat\Z/; # Match. "cat\n" =~ /cat\Z/; # Match. "cat\n" =~ /cat\z/; # No match. "cat" =~ /\bcat\b/; # Matches. "cats" =~ /\bcat\b/; # No match. "cat" =~ /\bcat\B/; # No match. "cats" =~ /\bcat\B/; # Match. while ("cat dog" =~ /(\w+)/g) { print $1; # Prints 'catdog' } while ("cat dog" =~ /\G(\w+)/g) { print $1; # Prints 'cat' } my $s = "He said, \"Is pi 3.14? (I'm not sure).\""; print join("|", $s =~ m/ ( .+? \b ) /xg), "\n"; print join("|", $s =~ m/ ( .+? \b{wb} ) /xg), "\n"; prints He| |said|, "|Is| |pi| |3|.|14|? (|I|'|m| |not| |sure He| |said|,| |"|Is| |pi| |3.14|?| |(|I'm| |not| |sure|)|.|" =head2 Misc Here we document the backslash sequences that don't fall in one of the categories above. These are: =over 4 =item \K This appeared in perl 5.10.0. Anything matched left of C<\K> is not included in C<$&>, and will not be replaced if the pattern is used in a substitution. This lets you write C<s/PAT1 \K PAT2/REPL/x> instead of C<s/(PAT1) PAT2/${1}REPL/x> or C<s/(?<=PAT1) PAT2/REPL/x>. Mnemonic: I<K>eep. =item \N This feature, available starting in v5.12, matches any character that is B<not> a newline. It is a short-hand for writing C<[^\n]>, and is identical to the C<.> metasymbol, except under the C</s> flag, which changes the meaning of C<.>, but not C<\N>. Note that C<\N{...}> can mean a L<named or numbered character |/Named or numbered characters and character sequences>. Mnemonic: Complement of I<\n>. =item \R X<\R> C<\R> matches a I<generic newline>; that is, anything considered a linebreak sequence by Unicode. This includes all characters matched by C<\v> (vertical whitespace), and the multi character sequence C<"\x0D\x0A"> (carriage return followed by a line feed, sometimes called the network newline; it's the end of line sequence used in Microsoft text files opened in binary mode). C<\R> is equivalent to C<< (?>\x0D\x0A|\v) >>. (The reason it doesn't backtrack is that the sequence is considered inseparable. That means that "\x0D\x0A" =~ /^\R\x0A$/ # No match fails, because the C<\R> matches the entire string, and won't backtrack to match just the C<"\x0D">.) Since C<\R> can match a sequence of more than one character, it cannot be put inside a bracketed character class; C</[\R]/> is an error; use C<\v> instead. C<\R> was introduced in perl 5.10.0. Note that this does not respect any locale that might be in effect; it matches according to the platform's native character set. Mnemonic: none really. C<\R> was picked because PCRE already uses C<\R>, and more importantly because Unicode recommends such a regular expression metacharacter, and suggests C<\R> as its notation. =item \X X<\X> This matches a Unicode I<extended grapheme cluster>. C<\X> matches quite well what normal (non-Unicode-programmer) usage would consider a single character. As an example, consider a G with some sort of diacritic mark, such as an arrow. There is no such single character in Unicode, but one can be composed by using a G followed by a Unicode "COMBINING UPWARDS ARROW BELOW", and would be displayed by Unicode-aware software as if it were a single character. The match is greedy and non-backtracking, so that the cluster is never broken up into smaller components. See also L<C<\b{gcb}>|/\b{}, \b, \B{}, \B>. Mnemonic: eI<X>tended Unicode character. =back =head4 Examples $str =~ s/foo\Kbar/baz/g; # Change any 'bar' following a 'foo' to 'baz' $str =~ s/(.)\K\g1//g; # Delete duplicated characters. "\n" =~ /^\R$/; # Match, \n is a generic newline. "\r" =~ /^\R$/; # Match, \r is a generic newline. "\r\n" =~ /^\R$/; # Match, \r\n is a generic newline. "P\x{307}" =~ /^\X$/ # \X matches a P with a dot above. =cut perl5141delta.pod 0000644 00000017436 15125556335 0007564 0 ustar 00 =encoding utf8 =head1 NAME perl5141delta - what is new for perl v5.14.1 =head1 DESCRIPTION This document describes differences between the 5.14.0 release and the 5.14.1 release. If you are upgrading from an earlier release such as 5.12.0, first read L<perl5140delta>, which describes differences between 5.12.0 and 5.14.0. =head1 Core Enhancements No changes since 5.14.0. =head1 Security No changes since 5.14.0. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.14.0. If any exist, they are bugs and reports are welcome. =head1 Deprecations There have been no deprecations since 5.14.0. =head1 Modules and Pragmata =head2 New Modules and Pragmata None =head2 Updated Modules and Pragmata =over 4 =item * L<B::Deparse> has been upgraded from version 1.03 to 1.04, to address two regressions in Perl 5.14.0: Deparsing of the C<glob> operator and its diamond (C<< <> >>) form now works again. [perl #90898] The presence of subroutines named C<::::> or C<::::::> no longer causes B::Deparse to hang. =item * L<Pod::Perldoc> has been upgraded from version 3.15_03 to 3.15_04. It corrects the search paths on VMS. [perl #90640] =back =head2 Removed Modules and Pragmata None =head1 Documentation =head2 New Documentation None =head2 Changes to Existing Documentation =head3 L<perlfunc> =over =item * C<given>, C<when> and C<default> are now listed in L<perlfunc>. =item * Documentation for C<use> now includes a pointer to F<if.pm>. =back =head3 L<perllol> =over =item * L<perllol> has been expanded with examples using the new C<push $scalar> syntax introduced in Perl 5.14.0. =back =head3 L<perlop> =over 4 =item * The explanation of bitwise operators has been expanded to explain how they work on Unicode strings. =item * The section on the triple-dot or yada-yada operator has been moved up, as it used to separate two closely related sections about the comma operator. =item * More examples for C<m//g> have been added. =item * The C<<< <<\FOO >>> here-doc syntax has been documented. =back =head3 L<perlrun> =over =item * L<perlrun> has undergone a significant clean-up. Most notably, the B<-0x...> form of the B<-0> flag has been clarified, and the final section on environment variables has been corrected and expanded. =back =head3 L<POSIX> =over =item * The invocation documentation for C<WIFEXITED>, C<WEXITSTATUS>, C<WIFSIGNALED>, C<WTERMSIG>, C<WIFSTOPPED>, and C<WSTOPSIG> was corrected. =back =head1 Diagnostics The following additions or changes have been made to diagnostic output, including warnings and fatal error messages. For the complete list of diagnostic messages, see L<perldiag>. =head2 New Diagnostics None =head2 Changes to Existing Diagnostics None =head1 Utility Changes None =head1 Configuration and Compilation =over 4 =item * F<regexp.h> has been modified for compatibility with GCC's C<-Werror> option, as used by some projects that include perl's header files. =back =head1 Testing =over 4 =item * Some test failures in F<dist/Locale-Maketext/t/09_compile.t> that could occur depending on the environment have been fixed. [perl #89896] =item * A watchdog timer for F<t/re/re.t> was lengthened to accommodate SH-4 systems which were unable to complete the tests before the previous timer ran out. =back =head1 Platform Support =head2 New Platforms None =head2 Discontinued Platforms None =head2 Platform-Specific Notes =head3 Solaris =over =item * Documentation listing the Solaris packages required to build Perl on Solaris 9 and Solaris 10 has been corrected. =back =head3 Mac OS X =over =item * The F<lib/locale.t> test script has been updated to work on the upcoming Lion release. =item * Mac OS X specific compilation instructions have been clarified. =back =head3 Ubuntu Linux =over =item * The L<ODBM_File> installation process has been updated with the new library paths on Ubuntu natty. =back =head1 Internal Changes =over =item * The compiled representation of formats is now stored via the mg_ptr of their PERL_MAGIC_fm. Previously it was stored in the string buffer, beyond SvLEN(), the regular end of the string. SvCOMPILED() and SvCOMPILED_{on,off}() now exist solely for compatibility for XS code. The first is always 0, the other two now no-ops. =back =head1 Bug Fixes =over 4 =item * A bug has been fixed that would cause a "Use of freed value in iteration" error if the next two hash elements that would be iterated over are deleted. [perl #85026] =item * Passing the same constant subroutine to both C<index> and C<formline> no longer causes one or the other to fail. [perl #89218] =item * 5.14.0 introduced some memory leaks in regular expression character classes such as C<[\w\s]>, which have now been fixed. =item * An edge case in regular expression matching could potentially loop. This happened only under C</i> in bracketed character classes that have characters with multi-character folds, and the target string to match against includes the first portion of the fold, followed by another character that has a multi-character fold that begins with the remaining portion of the fold, plus some more. "s\N{U+DF}" =~ /[\x{DF}foo]/i is one such case. C<\xDF> folds to C<"ss">. =item * Several Unicode case-folding bugs have been fixed. =item * The new (in 5.14.0) regular expression modifier C</a> when repeated like C</aa> forbids the characters outside the ASCII range that match characters inside that range from matching under C</i>. This did not work under some circumstances, all involving alternation, such as: "\N{KELVIN SIGN}" =~ /k|foo/iaa; succeeded inappropriately. This is now fixed. =item * Fixed a case where it was possible that a freed buffer may have been read from when parsing a here document. =back =head1 Acknowledgements Perl 5.14.1 represents approximately four weeks of development since Perl 5.14.0 and contains approximately 3500 lines of changes across 38 files from 17 authors. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.14.1: Bo Lindbergh, Claudio Ramirez, Craig A. Berry, David Leadbeater, Father Chrysostomos, Jesse Vincent, Jim Cromie, Justin Case, Karl Williamson, Leo Lapworth, Nicholas Clark, Nobuhiro Iwamatsu, smash, Tom Christiansen, Ton Hospel, Vladimir Timofeev, and Zsbán Ambrus. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl5143delta.pod 0000644 00000017120 15125556335 0007554 0 ustar 00 =encoding utf8 =head1 NAME perl5143delta - what is new for perl v5.14.3 =head1 DESCRIPTION This document describes differences between the 5.14.2 release and the 5.14.3 release. If you are upgrading from an earlier release such as 5.12.0, first read L<perl5140delta>, which describes differences between 5.12.0 and 5.14.0. =head1 Core Enhancements No changes since 5.14.0. =head1 Security =head2 C<Digest> unsafe use of eval (CVE-2011-3597) The C<Digest-E<gt>new()> function did not properly sanitize input before using it in an eval() call, which could lead to the injection of arbitrary Perl code. In order to exploit this flaw, the attacker would need to be able to set the algorithm name used, or be able to execute arbitrary Perl code already. This problem has been fixed. =head2 Heap buffer overrun in 'x' string repeat operator (CVE-2012-5195) Poorly written perl code that allows an attacker to specify the count to perl's 'x' string repeat operator can already cause a memory exhaustion denial-of-service attack. A flaw in versions of perl before 5.15.5 can escalate that into a heap buffer overrun; coupled with versions of glibc before 2.16, it possibly allows the execution of arbitrary code. This problem has been fixed. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.14.0. If any exist, they are bugs and reports are welcome. =head1 Deprecations There have been no deprecations since 5.14.0. =head1 Modules and Pragmata =head2 New Modules and Pragmata None =head2 Updated Modules and Pragmata =over 4 =item * L<PerlIO::scalar> was updated to fix a bug in which opening a filehandle to a glob copy caused assertion failures (under debugging) or hangs or other erratic behaviour without debugging. =item * L<ODBM_File> and L<NDBM_File> were updated to allow building on GNU/Hurd. =item * L<IPC::Open3> has been updated to fix a regression introduced in perl 5.12, which broke C<IPC::Open3::open3($in, $out, $err, '-')>. [perl #95748] =item * L<Digest> has been upgraded from version 1.16 to 1.16_01. See L</Security>. =item * L<Module::CoreList> has been updated to version 2.49_04 to add data for this release. =back =head2 Removed Modules and Pragmata None =head1 Documentation =head2 New Documentation None =head2 Changes to Existing Documentation =head3 L<perlcheat> =over 4 =item * L<perlcheat> was updated to 5.14. =back =head1 Configuration and Compilation =over 4 =item * h2ph was updated to search correctly gcc include directories on platforms such as Debian with multi-architecture support. =item * In Configure, the test for procselfexe was refactored into a loop. =back =head1 Platform Support =head2 New Platforms None =head2 Discontinued Platforms None =head2 Platform-Specific Notes =over 4 =item FreeBSD The FreeBSD hints file was corrected to be compatible with FreeBSD 10.0. =item Solaris and NetBSD Configure was updated for "procselfexe" support on Solaris and NetBSD. =item HP-UX README.hpux was updated to note the existence of a broken header in HP-UX 11.00. =item Linux libutil is no longer used when compiling on Linux platforms, which avoids warnings being emitted. The system gcc (rather than any other gcc which might be in the compiling user's path) is now used when searching for libraries such as C<-lm>. =item Mac OS X The locale tests were updated to reflect the behaviour of locales in Mountain Lion. =item GNU/Hurd Various build and test fixes were included for GNU/Hurd. LFS support was enabled in GNU/Hurd. =item NetBSD The NetBSD hints file was corrected to be compatible with NetBSD 6.* =back =head1 Bug Fixes =over 4 =item * A regression has been fixed that was introduced in 5.14, in C</i> regular expression matching, in which a match improperly fails if the pattern is in UTF-8, the target string is not, and a Latin-1 character precedes a character in the string that should match the pattern. [perl #101710] =item * In case-insensitive regular expression pattern matching, no longer on UTF-8 encoded strings does the scan for the start of match only look at the first possible position. This caused matches such as C<"f\x{FB00}" =~ /ff/i> to fail. =item * The sitecustomize support was made relocatableinc aware, so that -Dusesitecustomize and -Duserelocatableinc may be used together. =item * The smartmatch operator (C<~~>) was changed so that the right-hand side takes precedence during C<Any ~~ Object> operations. =item * A bug has been fixed in the tainting support, in which an C<index()> operation on a tainted constant would cause all other constants to become tainted. [perl #64804] =item * A regression has been fixed that was introduced in perl 5.12, whereby tainting errors were not correctly propagated through C<die()>. [perl #111654] =item * A regression has been fixed that was introduced in perl 5.14, in which C</[[:lower:]]/i> and C</[[:upper:]]/i> no longer matched the opposite case. [perl #101970] =back =head1 Acknowledgements Perl 5.14.3 represents approximately 12 months of development since Perl 5.14.2 and contains approximately 2,300 lines of changes across 64 files from 22 authors. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.14.3: Abigail, Andy Dougherty, Carl Hayter, Chris 'BinGOs' Williams, Dave Rolsky, David Mitchell, Dominic Hargreaves, Father Chrysostomos, Florian Ragwitz, H.Merijn Brand, Jilles Tjoelker, Karl Williamson, Leon Timmermans, Michael G Schwern, Nicholas Clark, Niko Tyni, Pino Toscano, Ricardo Signes, Salvador Fandiño, Samuel Thibault, Steve Hay, Tony Cook. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl5223delta.pod 0000644 00000020410 15125556335 0007547 0 ustar 00 =encoding utf8 =head1 NAME perl5223delta - what is new for perl v5.22.3 =head1 DESCRIPTION This document describes differences between the 5.22.2 release and the 5.22.3 release. If you are upgrading from an earlier release such as 5.22.1, first read L<perl5222delta>, which describes differences between 5.22.1 and 5.22.2. =head1 Security =head2 B<-Di> switch is now required for PerlIO debugging output Previously PerlIO debugging output would be sent to the file specified by the C<PERLIO_DEBUG> environment variable if perl wasn't running setuid and the B<-T> or B<-t> switches hadn't been parsed yet. If perl performed output at a point where it hadn't yet parsed its switches this could result in perl creating or overwriting the file named by C<PERLIO_DEBUG> even when the B<-T> switch had been supplied. Perl now requires the B<-Di> switch to produce PerlIO debugging output. By default this is written to C<stderr>, but can optionally be redirected to a file by setting the C<PERLIO_DEBUG> environment variable. If perl is running setuid or the B<-T> switch was supplied C<PERLIO_DEBUG> is ignored and the debugging output is sent to C<stderr> as for any other B<-D> switch. =head2 Core modules and tools no longer search F<"."> for optional modules The tools and many modules supplied in core no longer search the default current directory entry in L<C<@INC>|perlvar/@INC> for optional modules. For example, L<Storable> will remove the final F<"."> from C<@INC> before trying to load L<Log::Agent>. This prevents an attacker injecting an optional module into a process run by another user where the current directory is writable by the attacker, e.g. the F</tmp> directory. In most cases this removal should not cause problems, but difficulties were encountered with L<base>, which treats every module name supplied as optional. These difficulties have not yet been resolved, so for this release there are no changes to L<base>. We hope to have a fix for L<base> in Perl 5.22.4. To protect your own code from this attack, either remove the default F<"."> entry from C<@INC> at the start of your script, so: #!/usr/bin/perl use strict; ... becomes: #!/usr/bin/perl BEGIN { pop @INC if $INC[-1] eq '.' } use strict; ... or for modules, remove F<"."> from a localized C<@INC>, so: my $can_foo = eval { require Foo; } becomes: my $can_foo = eval { local @INC = @INC; pop @INC if $INC[-1] eq '.'; require Foo; }; =head1 Incompatible Changes Other than the security changes above there are no changes intentionally incompatible with Perl 5.22.2. If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Archive::Tar> has been upgraded from version 2.04 to 2.04_01. =item * L<bignum> has been upgraded from version 0.39 to 0.39_01. =item * L<CPAN> has been upgraded from version 2.11 to 2.11_01. =item * L<Digest> has been upgraded from version 1.17 to 1.17_01. =item * L<Digest::SHA> has been upgraded from version 5.95 to 5.95_01. =item * L<Encode> has been upgraded from version 2.72 to 2.72_01. =item * L<ExtUtils::Command> has been upgraded from version 1.20 to 1.20_01. =item * L<ExtUtils::MakeMaker> has been upgraded from version 7.04_01 to 7.04_02. =item * L<File::Fetch> has been upgraded from version 0.48 to 0.48_01. =item * L<File::Spec> has been upgraded from version 3.56_01 to 3.56_02. =item * L<HTTP::Tiny> has been upgraded from version 0.054 to 0.054_01. =item * L<IO> has been upgraded from version 1.35 to 1.35_01. =item * The IO-Compress modules have been upgraded from version 2.068 to 2.068_001. =item * L<IPC::Cmd> has been upgraded from version 0.92 to 0.92_01. =item * L<JSON::PP> has been upgraded from version 2.27300 to 2.27300_01. =item * L<Locale::Maketext> has been upgraded from version 1.26 to 1.26_01. =item * L<Locale::Maketext::Simple> has been upgraded from version 0.21 to 0.21_01. =item * L<Memoize> has been upgraded from version 1.03 to 1.03_01. =item * L<Module::CoreList> has been upgraded from version 5.20160429 to 5.20170114_22. =item * L<Net::Ping> has been upgraded from version 2.43 to 2.43_01. =item * L<Parse::CPAN::Meta> has been upgraded from version 1.4414 to 1.4414_001. =item * L<Pod::Html> has been upgraded from version 1.22 to 1.2201. =item * L<Pod::Perldoc> has been upgraded from version 3.25 to 3.25_01. =item * L<Storable> has been upgraded from version 2.53_01 to 2.53_02. =item * L<Sys::Syslog> has been upgraded from version 0.33 to 0.33_01. =item * L<Test> has been upgraded from version 1.26 to 1.26_01. =item * L<Test::Harness> has been upgraded from version 3.35 to 3.35_01. =item * L<XSLoader> has been upgraded from version 0.20 to 0.20_01, fixing a security hole in which binary files could be loaded from a path outside of C<@INC>. L<[perl #128528]|https://rt.perl.org/Public/Bug/Display.html?id=128528> =back =head1 Documentation =head2 Changes to Existing Documentation =head3 L<perlapio> =over 4 =item * The documentation of C<PERLIO_DEBUG> has been updated. =back =head3 L<perlrun> =over 4 =item * The new B<-Di> switch has been documented, and the documentation of C<PERLIO_DEBUG> has been updated. =back =head1 Testing =over 4 =item * A new test script, F<t/run/switchDx.t>, has been added to test that the new B<-Di> switch is working correctly. =back =head1 Selected Bug Fixes =over 4 =item * The C<PadlistNAMES> macro is an lvalue again. =back =head1 Acknowledgements Perl 5.22.3 represents approximately 9 months of development since Perl 5.22.2 and contains approximately 4,400 lines of changes across 240 files from 20 authors. Excluding auto-generated files, documentation and release tools, there were approximately 2,200 lines of changes to 170 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.22.3: Aaron Crane, Abigail, Alex Vandiver, Aristotle Pagaltzis, Chad Granum, Chris 'BinGOs' Williams, Craig A. Berry, David Mitchell, Father Chrysostomos, James E Keenan, Jarkko Hietaniemi, Karen Etheridge, Karl Williamson, Matthew Horsfall, Niko Tyni, Ricardo Signes, Sawyer X, Stevan Little, Steve Hay, Tony Cook. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the Perl bug database at https://rt.perl.org/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl5200delta.pod 0000644 00000341762 15125556335 0007562 0 ustar 00 =encoding utf8 =head1 NAME perl5200delta - what is new for perl v5.20.0 =head1 DESCRIPTION This document describes differences between the 5.18.0 release and the 5.20.0 release. If you are upgrading from an earlier release such as 5.16.0, first read L<perl5180delta>, which describes differences between 5.16.0 and 5.18.0. =head1 Core Enhancements =head2 Experimental Subroutine signatures Declarative syntax to unwrap argument list into lexical variables. C<sub foo ($a,$b) {...}> checks the number of arguments and puts the arguments into lexical variables. Signatures are not equivalent to the existing idiom of C<sub foo { my($a,$b) = @_; ... }>. Signatures are only available by enabling a non-default feature, and generate warnings about being experimental. The syntactic clash with prototypes is managed by disabling the short prototype syntax when signatures are enabled. See L<perlsub/Signatures> for details. =head2 C<sub>s now take a C<prototype> attribute When declaring or defining a C<sub>, the prototype can now be specified inside of a C<prototype> attribute instead of in parens following the name. For example, C<sub foo($$){}> could be rewritten as C<sub foo : prototype($$){}>. =head2 More consistent prototype parsing Multiple semicolons in subroutine prototypes have long been tolerated and treated as a single semicolon. There was one case where this did not happen. A subroutine whose prototype begins with "*" or ";*" can affect whether a bareword is considered a method name or sub call. This now applies also to ";;;*". Whitespace has long been allowed inside subroutine prototypes, so C<sub( $ $ )> is equivalent to C<sub($$)>, but until now it was stripped when the subroutine was parsed. Hence, whitespace was I<not> allowed in prototypes set by C<Scalar::Util::set_prototype>. Now it is permitted, and the parser no longer strips whitespace. This means C<prototype &mysub> returns the original prototype, whitespace and all. =head2 C<rand> now uses a consistent random number generator Previously perl would use a platform specific random number generator, varying between the libc rand(), random() or drand48(). This meant that the quality of perl's random numbers would vary from platform to platform, from the 15 bits of rand() on Windows to 48-bits on POSIX platforms such as Linux with drand48(). Perl now uses its own internal drand48() implementation on all platforms. This does not make perl's C<rand> cryptographically secure. [perl #115928] =head2 New slice syntax The new C<%hash{...}> and C<%array[...]> syntax returns a list of key/value (or index/value) pairs. See L<perldata/"Key/Value Hash Slices">. =head2 Experimental Postfix Dereferencing When the C<postderef> feature is in effect, the following syntactical equivalencies are set up: $sref->$*; # same as ${ $sref } # interpolates $aref->@*; # same as @{ $aref } # interpolates $href->%*; # same as %{ $href } $cref->&*; # same as &{ $cref } $gref->**; # same as *{ $gref } $aref->$#*; # same as $#{ $aref } $gref->*{ $slot }; # same as *{ $gref }{ $slot } $aref->@[ ... ]; # same as @$aref[ ... ] # interpolates $href->@{ ... }; # same as @$href{ ... } # interpolates $aref->%[ ... ]; # same as %$aref[ ... ] $href->%{ ... }; # same as %$href{ ... } Those marked as interpolating only interpolate if the associated C<postderef_qq> feature is also enabled. This feature is B<experimental> and will trigger C<experimental::postderef>-category warnings when used, unless they are suppressed. For more information, consult L<the Postfix Dereference Syntax section of perlref|perlref/Postfix Dereference Syntax>. =head2 Unicode 6.3 now supported Perl now supports and is shipped with Unicode 6.3 (though Perl may be recompiled with any previous Unicode release as well). A detailed list of Unicode 6.3 changes is at L<http://www.unicode.org/versions/Unicode6.3.0/>. =head2 New C<\p{Unicode}> regular expression pattern property This is a synonym for C<\p{Any}> and matches the set of Unicode-defined code points 0 - 0x10FFFF. =head2 Better 64-bit support On 64-bit platforms, the internal array functions now use 64-bit offsets, allowing Perl arrays to hold more than 2**31 elements, if you have the memory available. The regular expression engine now supports strings longer than 2**31 characters. [perl #112790, #116907] The functions PerlIO_get_bufsiz, PerlIO_get_cnt, PerlIO_set_cnt and PerlIO_set_ptrcnt now have SSize_t, rather than int, return values and parameters. =head2 C<S<use locale>> now works on UTF-8 locales Until this release, only single-byte locales, such as the ISO 8859 series were supported. Now, the increasingly common multi-byte UTF-8 locales are also supported. A UTF-8 locale is one in which the character set is Unicode and the encoding is UTF-8. The POSIX C<LC_CTYPE> category operations (case changing (like C<lc()>, C<"\U">), and character classification (C<\w>, C<\D>, C<qr/[[:punct:]]/>)) under such a locale work just as if not under locale, but instead as if under C<S<use feature 'unicode_strings'>>, except taint rules are followed. Sorting remains by code point order in this release. [perl #56820]. =head2 C<S<use locale>> now compiles on systems without locale ability Previously doing this caused the program to not compile. Within its scope the program behaves as if in the "C" locale. Thus programs written for platforms that support locales can run on locale-less platforms without change. Attempts to change the locale away from the "C" locale will, of course, fail. =head2 More locale initialization fallback options If there was an error with locales during Perl start-up, it immediately gave up and tried to use the C<"C"> locale. Now it first tries using other locales given by the environment variables, as detailed in L<perllocale/ENVIRONMENT>. For example, if C<LC_ALL> and C<LANG> are both set, and using the C<LC_ALL> locale fails, Perl will now try the C<LANG> locale, and only if that fails, will it fall back to C<"C">. On Windows machines, Perl will try, ahead of using C<"C">, the system default locale if all the locales given by environment variables fail. =head2 C<-DL> runtime option now added for tracing locale setting This is designed for Perl core developers to aid in field debugging bugs regarding locales. =head2 B<-F> now implies B<-a> and B<-a> implies B<-n> Previously B<-F> without B<-a> was a no-op, and B<-a> without B<-n> or B<-p> was a no-op, with this change, if you supply B<-F> then both B<-a> and B<-n> are implied and if you supply B<-a> then B<-n> is implied. You can still use B<-p> for its extra behaviour. [perl #116190] =head2 $a and $b warnings exemption The special variables $a and $b, used in C<sort>, are now exempt from "used once" warnings, even where C<sort> is not used. This makes it easier for CPAN modules to provide functions using $a and $b for similar purposes. [perl #120462] =head1 Security =head2 Avoid possible read of free()d memory during parsing It was possible that free()d memory could be read during parsing in the unusual circumstance of the Perl program ending with a heredoc and the last line of the file on disk having no terminating newline character. This has now been fixed. =head1 Incompatible Changes =head2 C<do> can no longer be used to call subroutines The C<do SUBROUTINE(LIST)> form has resulted in a deprecation warning since Perl v5.0.0, and is now a syntax error. =head2 Quote-like escape changes The character after C<\c> in a double-quoted string ("..." or qq(...)) or regular expression must now be a printable character and may not be C<{>. A literal C<{> after C<\B> or C<\b> is now fatal. These were deprecated in perl v5.14.0. =head2 Tainting happens under more circumstances; now conforms to documentation This affects regular expression matching and changing the case of a string (C<lc>, C<"\U">, I<etc>.) within the scope of C<use locale>. The result is now tainted based on the operation, no matter what the contents of the string were, as the documentation (L<perlsec>, L<perllocale/SECURITY>) indicates it should. Previously, for the case change operation, if the string contained no characters whose case change could be affected by the locale, the result would not be tainted. For example, the result of C<uc()> on an empty string or one containing only above-Latin1 code points is now tainted, and wasn't before. This leads to more consistent tainting results. Regular expression patterns taint their non-binary results (like C<$&>, C<$2>) if and only if the pattern contains elements whose matching depends on the current (potentially tainted) locale. Like the case changing functions, the actual contents of the string being matched now do not matter, whereas formerly it did. For example, if the pattern contains a C<\w>, the results will be tainted even if the match did not have to use that portion of the pattern to succeed or fail, because what a C<\w> matches depends on locale. However, for example, a C<.> in a pattern will not enable tainting, because the dot matches any single character, and what the current locale is doesn't change in any way what matches and what doesn't. =head2 C<\p{}>, C<\P{}> matching has changed for non-Unicode code points. C<\p{}> and C<\P{}> are defined by Unicode only on Unicode-defined code points (C<U+0000> through C<U+10FFFF>). Their behavior on matching these legal Unicode code points is unchanged, but there are changes for code points C<0x110000> and above. Previously, Perl treated the result of matching C<\p{}> and C<\P{}> against these as C<undef>, which translates into "false". For C<\P{}>, this was then complemented into "true". A warning was supposed to be raised when this happened. However, various optimizations could prevent the warning, and the results were often counter-intuitive, with both a match and its seeming complement being false. Now all non-Unicode code points are treated as typical unassigned Unicode code points. This generally is more Do-What-I-Mean. A warning is raised only if the results are arguably different from a strict Unicode approach, and from what Perl used to do. Code that needs to be strictly Unicode compliant can make this warning fatal, and then Perl always raises the warning. Details are in L<perlunicode/Beyond Unicode code points>. =head2 C<\p{All}> has been expanded to match all possible code points The Perl-defined regular expression pattern element C<\p{All}>, unused on CPAN, used to match just the Unicode code points; now it matches all possible code points; that is, it is equivalent to C<qr/./s>. Thus C<\p{All}> is no longer synonymous with C<\p{Any}>, which continues to match just the Unicode code points, as Unicode says it should. =head2 Data::Dumper's output may change Depending on the data structures dumped and the settings set for Data::Dumper, the dumped output may have changed from previous versions. If you have tests that depend on the exact output of Data::Dumper, they may fail. To avoid this problem in your code, test against the data structure from evaluating the dumped structure, instead of the dump itself. =head2 Locale decimal point character no longer leaks outside of S<C<use locale>> scope This is actually a bug fix, but some code has come to rely on the bug being present, so this change is listed here. The current locale that the program is running under is not supposed to be visible to Perl code except within the scope of a S<C<use locale>>. However, until now under certain circumstances, the character used for a decimal point (often a comma) leaked outside the scope. If your code is affected by this change, simply add a S<C<use locale>>. =head2 Assignments of Windows sockets error codes to $! now prefer F<errno.h> values over WSAGetLastError() values In previous versions of Perl, Windows sockets error codes as returned by WSAGetLastError() were assigned to $!, and some constants such as ECONNABORTED, not in F<errno.h> in VC++ (or the various Windows ports of gcc) were defined to corresponding WSAE* values to allow $! to be tested against the E* constants exported by L<Errno> and L<POSIX>. This worked well until VC++ 2010 and later, which introduced new E* constants with values E<gt> 100 into F<errno.h>, including some being (re)defined by perl to WSAE* values. That caused problems when linking XS code against other libraries which used the original definitions of F<errno.h> constants. To avoid this incompatibility, perl now maps WSAE* error codes to E* values where possible, and assigns those values to $!. The E* constants exported by L<Errno> and L<POSIX> are updated to match so that testing $! against them, wherever previously possible, will continue to work as expected, and all E* constants found in F<errno.h> are now exported from those modules with their original F<errno.h> values. In order to avoid breakage in existing Perl code which assigns WSAE* values to $!, perl now intercepts the assignment and performs the same mapping to E* values as it uses internally when assigning to $! itself. However, one backwards-incompatibility remains: existing Perl code which compares $! against the numeric values of the WSAE* error codes that were previously assigned to $! will now be broken in those cases where a corresponding E* value has been assigned instead. This is only an issue for those E* values E<lt> 100, which were always exported from L<Errno> and L<POSIX> with their original F<errno.h> values, and therefore could not be used for WSAE* error code tests (e.g. WSAEINVAL is 10022, but the corresponding EINVAL is 22). (E* values E<gt> 100, if present, were redefined to WSAE* values anyway, so compatibility can be achieved by using the E* constants, which will work both before and after this change, albeit using different numeric values under the hood.) =head2 Functions C<PerlIO_vsprintf> and C<PerlIO_sprintf> have been removed These two functions, undocumented, unused in CPAN, and problematic, have been removed. =head1 Deprecations =head2 The C</\C/> character class The C</\C/> regular expression character class is deprecated. From perl 5.22 onwards it will generate a warning, and from perl 5.24 onwards it will be a regular expression compiler error. If you need to examine the individual bytes that make up a UTF8-encoded character, then use C<utf8::encode()> on the string (or a copy) first. =head2 Literal control characters in variable names This deprecation affects things like $\cT, where \cT is a literal control (such as a C<NAK> or C<NEGATIVE ACKNOWLEDGE> character) in the source code. Surprisingly, it appears that originally this was intended as the canonical way of accessing variables like $^T, with the caret form only being added as an alternative. The literal control form is being deprecated for two main reasons. It has what are likely unfixable bugs, such as $\cI not working as an alias for $^I, and their usage not being portable to non-ASCII platforms: While $^T will work everywhere, \cT is whitespace in EBCDIC. [perl #119123] =head2 References to non-integers and non-positive integers in C<$/> Setting C<$/> to a reference to zero or a reference to a negative integer is now deprecated, and will behave B<exactly> as though it was set to C<undef>. If you want slurp behavior set C<$/> to C<undef> explicitly. Setting C<$/> to a reference to a non integer is now forbidden and will throw an error. Perl has never documented what would happen in this context and while it used to behave the same as setting C<$/> to the address of the references in future it may behave differently, so we have forbidden this usage. =head2 Character matching routines in POSIX Use of any of these functions in the C<POSIX> module is now deprecated: C<isalnum>, C<isalpha>, C<iscntrl>, C<isdigit>, C<isgraph>, C<islower>, C<isprint>, C<ispunct>, C<isspace>, C<isupper>, and C<isxdigit>. The functions are buggy and don't work on UTF-8 encoded strings. See their entries in L<POSIX> for more information. A warning is raised on the first call to any of them from each place in the code that they are called. (Hence a repeated statement in a loop will raise just the one warning.) =head2 Interpreter-based threads are now I<discouraged> The "interpreter-based threads" provided by Perl are not the fast, lightweight system for multitasking that one might expect or hope for. Threads are implemented in a way that make them easy to misuse. Few people know how to use them correctly or will be able to provide help. The use of interpreter-based threads in perl is officially L<discouraged|perlpolicy/discouraged>. =head2 Module removals The following modules will be removed from the core distribution in a future release, and will at that time need to be installed from CPAN. Distributions on CPAN which require these modules will need to list them as prerequisites. The core versions of these modules will now issue C<"deprecated">-category warnings to alert you to this fact. To silence these deprecation warnings, install the modules in question from CPAN. Note that the planned removal of these modules from core does not reflect a judgement about the quality of the code and should not be taken as a suggestion that their use be halted. Their disinclusion from core primarily hinges on their necessity to bootstrapping a fully functional, CPAN-capable Perl installation, not on concerns over their design. =over =item L<CGI> and its associated CGI:: packages =item L<inc::latest> =item L<Package::Constants> =item L<Module::Build> and its associated Module::Build:: packages =back =head2 Utility removals The following utilities will be removed from the core distribution in a future release, and will at that time need to be installed from CPAN. =over 4 =item L<find2perl> =item L<s2p> =item L<a2p> =back =head1 Performance Enhancements =over 4 =item * Perl has a new copy-on-write mechanism that avoids the need to copy the internal string buffer when assigning from one scalar to another. This makes copying large strings appear much faster. Modifying one of the two (or more) strings after an assignment will force a copy internally. This makes it unnecessary to pass strings by reference for efficiency. This feature was already available in 5.18.0, but wasn't enabled by default. It is the default now, and so you no longer need build perl with the F<Configure> argument: -Accflags=-DPERL_NEW_COPY_ON_WRITE It can be disabled (for now) in a perl build with: -Accflags=-DPERL_NO_COW On some operating systems Perl can be compiled in such a way that any attempt to modify string buffers shared by multiple SVs will crash. This way XS authors can test that their modules handle copy-on-write scalars correctly. See L<perlguts/"Copy on Write"> for detail. =item * Perl has an optimizer for regular expression patterns. It analyzes the pattern to find things such as the minimum length a string has to be to match, etc. It now better handles code points that are above the Latin1 range. =item * Executing a regex that contains the C<^> anchor (or its variant under the C</m> flag) has been made much faster in several situations. =item * Precomputed hash values are now used in more places during method lookup. =item * Constant hash key lookups (C<$hash{key}> as opposed to C<$hash{$key}>) have long had the internal hash value computed at compile time, to speed up lookup. This optimisation has only now been applied to hash slices as well. =item * Combined C<and> and C<or> operators in void context, like those generated for C<< unless ($a && $b) >> and C<< if ($a || b) >> now short circuit directly to the end of the statement. [perl #120128] =item * In certain situations, when C<return> is the last statement in a subroutine's main scope, it will be optimized out. This means code like: sub baz { return $cat; } will now behave like: sub baz { $cat; } which is notably faster. [perl #120765] =item * Code like: my $x; # or @x, %x my $y; is now optimized to: my ($x, $y); In combination with the L<padrange optimization introduced in v5.18.0|perl5180delta/Internal Changes>, this means longer uninitialized my variable statements are also optimized, so: my $x; my @y; my %z; becomes: my ($x, @y, %z); [perl #121077] =item * The creation of certain sorts of lists, including array and hash slices, is now faster. =item * The optimisation for arrays indexed with a small constant integer is now applied for integers in the range -128..127, rather than 0..255. This should speed up Perl code using expressions like C<$x[-1]>, at the expense of (presumably much rarer) code using expressions like C<$x[200]>. =item * The first iteration over a large hash (using C<keys> or C<each>) is now faster. This is achieved by preallocating the hash's internal iterator state, rather than lazily creating it when the hash is first iterated. (For small hashes, the iterator is still created only when first needed. The assumption is that small hashes are more likely to be used as objects, and therefore never allocated. For large hashes, that's less likely to be true, and the cost of allocating the iterator is swamped by the cost of allocating space for the hash itself.) =item * When doing a global regex match on a string that came from the C<readline> or C<E<lt>E<gt>> operator, the data is no longer copied unnecessarily. [perl #121259] =item * Dereferencing (as in C<$obj-E<gt>[0]> or C<$obj-E<gt>{k}>) is now faster when C<$obj> is an instance of a class that has overloaded methods, but doesn't overload any of the dereferencing methods C<@{}>, C<%{}>, and so on. =item * Perl's optimiser no longer skips optimising code that follows certain C<eval {}> expressions (including those with an apparent infinite loop). =item * The implementation now does a better job of avoiding meaningless work at runtime. Internal effect-free "null" operations (created as a side-effect of parsing Perl programs) are normally deleted during compilation. That deletion is now applied in some situations that weren't previously handled. =item * Perl now does less disk I/O when dealing with Unicode properties that cover up to three ranges of consecutive code points. =back =head1 Modules and Pragmata =head2 New Modules and Pragmata =over 4 =item * L<experimental> 0.007 has been added to the Perl core. =item * L<IO::Socket::IP> 0.29 has been added to the Perl core. =back =head2 Updated Modules and Pragmata =over 4 =item * L<Archive::Tar> has been upgraded from version 1.90 to 1.96. =item * L<arybase> has been upgraded from version 0.06 to 0.07. =item * L<Attribute::Handlers> has been upgraded from version 0.94 to 0.96. =item * L<attributes> has been upgraded from version 0.21 to 0.22. =item * L<autodie> has been upgraded from version 2.13 to 2.23. =item * L<AutoLoader> has been upgraded from version 5.73 to 5.74. =item * L<autouse> has been upgraded from version 1.07 to 1.08. =item * L<B> has been upgraded from version 1.42 to 1.48. =item * L<B::Concise> has been upgraded from version 0.95 to 0.992. =item * L<B::Debug> has been upgraded from version 1.18 to 1.19. =item * L<B::Deparse> has been upgraded from version 1.20 to 1.26. =item * L<base> has been upgraded from version 2.18 to 2.22. =item * L<Benchmark> has been upgraded from version 1.15 to 1.18. =item * L<bignum> has been upgraded from version 0.33 to 0.37. =item * L<Carp> has been upgraded from version 1.29 to 1.3301. =item * L<CGI> has been upgraded from version 3.63 to 3.65. NOTE: L<CGI> is deprecated and may be removed from a future version of Perl. =item * L<charnames> has been upgraded from version 1.36 to 1.40. =item * L<Class::Struct> has been upgraded from version 0.64 to 0.65. =item * L<Compress::Raw::Bzip2> has been upgraded from version 2.060 to 2.064. =item * L<Compress::Raw::Zlib> has been upgraded from version 2.060 to 2.065. =item * L<Config::Perl::V> has been upgraded from version 0.17 to 0.20. =item * L<constant> has been upgraded from version 1.27 to 1.31. =item * L<CPAN> has been upgraded from version 2.00 to 2.05. =item * L<CPAN::Meta> has been upgraded from version 2.120921 to 2.140640. =item * L<CPAN::Meta::Requirements> has been upgraded from version 2.122 to 2.125. =item * L<CPAN::Meta::YAML> has been upgraded from version 0.008 to 0.012. =item * L<Data::Dumper> has been upgraded from version 2.145 to 2.151. =item * L<DB> has been upgraded from version 1.04 to 1.07. =item * L<DB_File> has been upgraded from version 1.827 to 1.831. =item * L<DBM_Filter> has been upgraded from version 0.05 to 0.06. =item * L<deprecate> has been upgraded from version 0.02 to 0.03. =item * L<Devel::Peek> has been upgraded from version 1.11 to 1.16. =item * L<Devel::PPPort> has been upgraded from version 3.20 to 3.21. =item * L<diagnostics> has been upgraded from version 1.31 to 1.34. =item * L<Digest::MD5> has been upgraded from version 2.52 to 2.53. =item * L<Digest::SHA> has been upgraded from version 5.84 to 5.88. =item * L<DynaLoader> has been upgraded from version 1.18 to 1.25. =item * L<Encode> has been upgraded from version 2.49 to 2.60. =item * L<encoding> has been upgraded from version 2.6_01 to 2.12. =item * L<English> has been upgraded from version 1.06 to 1.09. C<$OLD_PERL_VERSION> was added as an alias of C<$]>. =item * L<Errno> has been upgraded from version 1.18 to 1.20_03. =item * L<Exporter> has been upgraded from version 5.68 to 5.70. =item * L<ExtUtils::CBuilder> has been upgraded from version 0.280210 to 0.280216. =item * L<ExtUtils::Command> has been upgraded from version 1.17 to 1.18. =item * L<ExtUtils::Embed> has been upgraded from version 1.30 to 1.32. =item * L<ExtUtils::Install> has been upgraded from version 1.59 to 1.67. =item * L<ExtUtils::MakeMaker> has been upgraded from version 6.66 to 6.98. =item * L<ExtUtils::Miniperl> has been upgraded from version to 1.01. =item * L<ExtUtils::ParseXS> has been upgraded from version 3.18 to 3.24. =item * L<ExtUtils::Typemaps> has been upgraded from version 3.19 to 3.24. =item * L<ExtUtils::XSSymSet> has been upgraded from version 1.2 to 1.3. =item * L<feature> has been upgraded from version 1.32 to 1.36. =item * L<fields> has been upgraded from version 2.16 to 2.17. =item * L<File::Basename> has been upgraded from version 2.84 to 2.85. =item * L<File::Copy> has been upgraded from version 2.26 to 2.29. =item * L<File::DosGlob> has been upgraded from version 1.10 to 1.12. =item * L<File::Fetch> has been upgraded from version 0.38 to 0.48. =item * L<File::Find> has been upgraded from version 1.23 to 1.27. =item * L<File::Glob> has been upgraded from version 1.20 to 1.23. =item * L<File::Spec> has been upgraded from version 3.40 to 3.47. =item * L<File::Temp> has been upgraded from version 0.23 to 0.2304. =item * L<FileCache> has been upgraded from version 1.08 to 1.09. =item * L<Filter::Simple> has been upgraded from version 0.89 to 0.91. =item * L<Filter::Util::Call> has been upgraded from version 1.45 to 1.49. =item * L<Getopt::Long> has been upgraded from version 2.39 to 2.42. =item * L<Getopt::Std> has been upgraded from version 1.07 to 1.10. =item * L<Hash::Util::FieldHash> has been upgraded from version 1.10 to 1.15. =item * L<HTTP::Tiny> has been upgraded from version 0.025 to 0.043. =item * L<I18N::Langinfo> has been upgraded from version 0.10 to 0.11. =item * L<I18N::LangTags> has been upgraded from version 0.39 to 0.40. =item * L<if> has been upgraded from version 0.0602 to 0.0603. =item * L<inc::latest> has been upgraded from version 0.4003 to 0.4205. NOTE: L<inc::latest> is deprecated and may be removed from a future version of Perl. =item * L<integer> has been upgraded from version 1.00 to 1.01. =item * L<IO> has been upgraded from version 1.28 to 1.31. =item * L<IO::Compress::Gzip> and friends have been upgraded from version 2.060 to 2.064. =item * L<IPC::Cmd> has been upgraded from version 0.80 to 0.92. =item * L<IPC::Open3> has been upgraded from version 1.13 to 1.16. =item * L<IPC::SysV> has been upgraded from version 2.03 to 2.04. =item * L<JSON::PP> has been upgraded from version 2.27202 to 2.27203. =item * L<List::Util> has been upgraded from version 1.27 to 1.38. =item * L<locale> has been upgraded from version 1.02 to 1.03. =item * L<Locale::Codes> has been upgraded from version 3.25 to 3.30. =item * L<Locale::Maketext> has been upgraded from version 1.23 to 1.25. =item * L<Math::BigInt> has been upgraded from version 1.9991 to 1.9993. =item * L<Math::BigInt::FastCalc> has been upgraded from version 0.30 to 0.31. =item * L<Math::BigRat> has been upgraded from version 0.2604 to 0.2606. =item * L<MIME::Base64> has been upgraded from version 3.13 to 3.14. =item * L<Module::Build> has been upgraded from version 0.4003 to 0.4205. NOTE: L<Module::Build> is deprecated and may be removed from a future version of Perl. =item * L<Module::CoreList> has been upgraded from version 2.89 to 3.10. =item * L<Module::Load> has been upgraded from version 0.24 to 0.32. =item * L<Module::Load::Conditional> has been upgraded from version 0.54 to 0.62. =item * L<Module::Metadata> has been upgraded from version 1.000011 to 1.000019. =item * L<mro> has been upgraded from version 1.11 to 1.16. =item * L<Net::Ping> has been upgraded from version 2.41 to 2.43. =item * L<Opcode> has been upgraded from version 1.25 to 1.27. =item * L<Package::Constants> has been upgraded from version 0.02 to 0.04. NOTE: L<Package::Constants> is deprecated and may be removed from a future version of Perl. =item * L<Params::Check> has been upgraded from version 0.36 to 0.38. =item * L<parent> has been upgraded from version 0.225 to 0.228. =item * L<Parse::CPAN::Meta> has been upgraded from version 1.4404 to 1.4414. =item * L<Perl::OSType> has been upgraded from version 1.003 to 1.007. =item * L<perlfaq> has been upgraded from version 5.0150042 to 5.0150044. =item * L<PerlIO> has been upgraded from version 1.07 to 1.09. =item * L<PerlIO::encoding> has been upgraded from version 0.16 to 0.18. =item * L<PerlIO::scalar> has been upgraded from version 0.16 to 0.18. =item * L<PerlIO::via> has been upgraded from version 0.12 to 0.14. =item * L<Pod::Escapes> has been upgraded from version 1.04 to 1.06. =item * L<Pod::Functions> has been upgraded from version 1.06 to 1.08. =item * L<Pod::Html> has been upgraded from version 1.18 to 1.21. =item * L<Pod::Parser> has been upgraded from version 1.60 to 1.62. =item * L<Pod::Perldoc> has been upgraded from version 3.19 to 3.23. =item * L<Pod::Usage> has been upgraded from version 1.61 to 1.63. =item * L<POSIX> has been upgraded from version 1.32 to 1.38_03. =item * L<re> has been upgraded from version 0.23 to 0.26. =item * L<Safe> has been upgraded from version 2.35 to 2.37. =item * L<Scalar::Util> has been upgraded from version 1.27 to 1.38. =item * L<SDBM_File> has been upgraded from version 1.09 to 1.11. =item * L<Socket> has been upgraded from version 2.009 to 2.013. =item * L<Storable> has been upgraded from version 2.41 to 2.49. =item * L<strict> has been upgraded from version 1.07 to 1.08. =item * L<subs> has been upgraded from version 1.01 to 1.02. =item * L<Sys::Hostname> has been upgraded from version 1.17 to 1.18. =item * L<Sys::Syslog> has been upgraded from version 0.32 to 0.33. =item * L<Term::Cap> has been upgraded from version 1.13 to 1.15. =item * L<Term::ReadLine> has been upgraded from version 1.12 to 1.14. =item * L<Test::Harness> has been upgraded from version 3.26 to 3.30. =item * L<Test::Simple> has been upgraded from version 0.98 to 1.001002. =item * L<Text::ParseWords> has been upgraded from version 3.28 to 3.29. =item * L<Text::Tabs> has been upgraded from version 2012.0818 to 2013.0523. =item * L<Text::Wrap> has been upgraded from version 2012.0818 to 2013.0523. =item * L<Thread> has been upgraded from version 3.02 to 3.04. =item * L<Thread::Queue> has been upgraded from version 3.02 to 3.05. =item * L<threads> has been upgraded from version 1.86 to 1.93. =item * L<threads::shared> has been upgraded from version 1.43 to 1.46. =item * L<Tie::Array> has been upgraded from version 1.05 to 1.06. =item * L<Tie::File> has been upgraded from version 0.99 to 1.00. =item * L<Tie::Hash> has been upgraded from version 1.04 to 1.05. =item * L<Tie::Scalar> has been upgraded from version 1.02 to 1.03. =item * L<Tie::StdHandle> has been upgraded from version 4.3 to 4.4. =item * L<Time::HiRes> has been upgraded from version 1.9725 to 1.9726. =item * L<Time::Piece> has been upgraded from version 1.20_01 to 1.27. =item * L<Unicode::Collate> has been upgraded from version 0.97 to 1.04. =item * L<Unicode::Normalize> has been upgraded from version 1.16 to 1.17. =item * L<Unicode::UCD> has been upgraded from version 0.51 to 0.57. =item * L<utf8> has been upgraded from version 1.10 to 1.13. =item * L<version> has been upgraded from version 0.9902 to 0.9908. =item * L<vmsish> has been upgraded from version 1.03 to 1.04. =item * L<warnings> has been upgraded from version 1.18 to 1.23. =item * L<Win32> has been upgraded from version 0.47 to 0.49. =item * L<XS::Typemap> has been upgraded from version 0.10 to 0.13. =item * L<XSLoader> has been upgraded from version 0.16 to 0.17. =back =head1 Documentation =head2 New Documentation =head3 L<perlrepository> This document was removed (actually, renamed L<perlgit> and given a major overhaul) in Perl v5.14, causing Perl documentation websites to show the now out of date version in Perl v5.12 as the latest version. It has now been restored in stub form, directing readers to current information. =head2 Changes to Existing Documentation =head3 L<perldata> =over 4 =item * New sections have been added to document the new index/value array slice and key/value hash slice syntax. =back =head3 L<perldebguts> =over 4 =item * The C<DB::goto> and C<DB::lsub> debugger subroutines are now documented. [perl #77680] =back =head3 L<perlexperiment> =over =item * C<\s> matching C<\cK> is marked experimental. =item * ithreads were accepted in v5.8.0 (but are discouraged as of v5.20.0). =item * Long doubles are not considered experimental. =item * Code in regular expressions, regular expression backtracking verbs, and lvalue subroutines are no longer listed as experimental. (This also affects L<perlre> and L<perlsub>.) =back =head3 L<perlfunc> =over =item * C<chop> and C<chomp> now note that they can reset the hash iterator. =item * C<exec>'s handling of arguments is now more clearly documented. =item * C<eval EXPR> now has caveats about expanding floating point numbers in some locales. =item * C<goto EXPR> is now documented to handle an expression that evalutes to a code reference as if it was C<goto &$coderef>. This behavior is at least ten years old. =item * Since Perl v5.10, it has been possible for subroutines in C<@INC> to return a reference to a scalar holding initial source code to prepend to the file. This is now documented. =item * The documentation of C<ref> has been updated to recommend the use of C<blessed>, C<isa> and C<reftype> when dealing with references to blessed objects. =back =head3 L<perlguts> =over 4 =item * Numerous minor changes have been made to reflect changes made to the perl internals in this release. =item * New sections on L<Read-Only Values|perlguts/"Read-Only Values"> and L<Copy on Write|perlguts/"Copy on Write"> have been added. =back =head3 L<perlhack> =over 4 =item * The L<Super Quick Patch Guide|perlhack/SUPER QUICK PATCH GUIDE> section has been updated. =back =head3 L<perlhacktips> =over 4 =item * The documentation has been updated to include some more examples of C<gdb> usage. =back =head3 L<perllexwarn> =over 4 =item * The L<perllexwarn> documentation used to describe the hierarchy of warning categories understood by the L<warnings> pragma. That description has now been moved to the L<warnings> documentation itself, leaving L<perllexwarn> as a stub that points to it. This change consolidates all documentation for lexical warnings in a single place. =back =head3 L<perllocale> =over =item * The documentation now mentions F<fc()> and C<\F>, and includes many clarifications and corrections in general. =back =head3 L<perlop> =over 4 =item * The language design of Perl has always called for monomorphic operators. This is now mentioned explicitly. =back =head3 L<perlopentut> =over 4 =item * The C<open> tutorial has been completely rewritten by Tom Christiansen, and now focuses on covering only the basics, rather than providing a comprehensive reference to all things openable. This rewrite came as the result of a vigorous discussion on perl5-porters kicked off by a set of improvements written by Alexander Hartmaier to the existing L<perlopentut>. A "more than you ever wanted to know about C<open>" document may follow in subsequent versions of perl. =back =head3 L<perlre> =over 4 =item * The fact that the regexp engine makes no effort to call (?{}) and (??{}) constructs any specified number of times (although it will basically DWIM in case of a successful match) has been documented. =item * The C</r> modifier (for non-destructive substitution) is now documented. [perl #119151] =item * The documentation for C</x> and C<(?# comment)> has been expanded and clarified. =back =head3 L<perlreguts> =over 4 =item * The documentation has been updated in the light of recent changes to F<regcomp.c>. =back =head3 L<perlsub> =over 4 =item * The need to predeclare recursive functions with prototypes in order for the prototype to be honoured in the recursive call is now documented. [perl #2726] =item * A list of subroutine names used by the perl implementation is now included. [perl #77680] =back =head3 L<perltrap> =over 4 =item * There is now a L<JavaScript|perltrap/JavaScript Traps> section. =back =head3 L<perlunicode> =over 4 =item * The documentation has been updated to reflect C<Bidi_Class> changes in Unicode 6.3. =back =head3 L<perlvar> =over 4 =item * A new section explaining the performance issues of $`, $& and $', including workarounds and changes in different versions of Perl, has been added. =item * Three L<English> variable names which have long been documented but do not actually exist have been removed from the documentation. These were C<$OLD_PERL_VERSION>, C<$OFMT>, and C<$ARRAY_BASE>. (Actually, C<OLD_PERL_VERSION> I<does> exist, starting with this revision, but remained undocumented until perl 5.22.0.) =back =head3 L<perlxs> =over 4 =item * Several problems in the C<MY_CXT> example have been fixed. =back =head1 Diagnostics The following additions or changes have been made to diagnostic output, including warnings and fatal error messages. For the complete list of diagnostic messages, see L<perldiag>. =head2 New Diagnostics =head3 New Errors =over 4 =item * L<delete argument is indexE<sol>value array slice, use array slice|perldiag/"delete argument is index/value array slice, use array slice"> (F) You used index/value array slice syntax (C<%array[...]>) as the argument to C<delete>. You probably meant C<@array[...]> with an @ symbol instead. =item * L<delete argument is keyE<sol>value hash slice, use hash slice|perldiag/"delete argument is key/value hash slice, use hash slice"> (F) You used key/value hash slice syntax (C<%hash{...}>) as the argument to C<delete>. You probably meant C<@hash{...}> with an @ symbol instead. =item * L<Magical list constants are not supported|perldiag/"Magical list constants are not supported"> (F) You assigned a magical array to a stash element, and then tried to use the subroutine from the same slot. You are asking Perl to do something it cannot do, details subject to change between Perl versions. =item * Added L<Setting $E<sol> to a %s reference is forbidden|perldiag/"Setting $E<sol> to %s reference is forbidden"> =back =head3 New Warnings =over 4 =item * L<%s on reference is experimental|perldiag/"push on reference is experimental">: The "auto-deref" feature is experimental. Starting in v5.14.0, it was possible to use push, pop, keys, and other built-in functions not only on aggregate types, but on references to them. The feature was not deployed to its original intended specification, and now may become redundant to postfix dereferencing. It has always been categorized as an experimental feature, and in v5.20.0 is carries a warning as such. Warnings will now be issued at compile time when these operations are detected. no if $] >= 5.01908, warnings => "experimental::autoderef"; Consider, though, replacing the use of these features, as they may change behavior again before becoming stable. =item * L<A sequence of multiple spaces in a charnames alias definition is deprecated|perldiag/"A sequence of multiple spaces in a charnames alias definition is deprecated"> L<Trailing white-space in a charnames alias definition is deprecated|perldiag/"Trailing white-space in a charnames alias definition is deprecated"> These two deprecation warnings involving C<\N{...}> were incorrectly implemented. They did not warn by default (now they do) and could not be made fatal via C<< use warnings FATAL => 'deprecated' >> (now they can). =item * L<Attribute prototype(%s) discards earlier prototype attribute in same sub|perldiag/"Attribute prototype(%s) discards earlier prototype attribute in same sub"> (W misc) A sub was declared as C<sub foo : prototype(A) : prototype(B) {}>, for example. Since each sub can only have one prototype, the earlier declaration(s) are discarded while the last one is applied. =item * L<Invalid \0 character in %s for %s: %s\0%s|perldiag/"Invalid \0 character in %s for %s: %s\0%s"> (W syscalls) Embedded \0 characters in pathnames or other system call arguments produce a warning as of 5.20. The parts after the \0 were formerly ignored by system calls. =item * L<Matched non-Unicode code point 0x%X against Unicode property; may not be portable|perldiag/"Matched non-Unicode code point 0x%X against Unicode property; may not be portable">. This replaces the message "Code point 0x%X is not Unicode, all \p{} matches fail; all \P{} matches succeed". =item * L<Missing ']' in prototype for %s : %s|perldiag/"Missing ']' in prototype for %s : %s"> (W illegalproto) A grouping was started with C<[> but never closed with C<]>. =item * L<Possible precedence issue with control flow operator|perldiag/"Possible precedence issue with control flow operator"> (W syntax) There is a possible problem with the mixing of a control flow operator (e.g. C<return>) and a low-precedence operator like C<or>. Consider: sub { return $a or $b; } This is parsed as: sub { (return $a) or $b; } Which is effectively just: sub { return $a; } Either use parentheses or the high-precedence variant of the operator. Note this may be also triggered for constructs like: sub { 1 if die; } =item * L<Postfix dereference is experimental|perldiag/"Postfix dereference is experimental"> (S experimental::postderef) This warning is emitted if you use the experimental postfix dereference syntax. Simply suppress the warning if you want to use the feature, but know that in doing so you are taking the risk of using an experimental feature which may change or be removed in a future Perl version: no warnings "experimental::postderef"; use feature "postderef", "postderef_qq"; $ref->$*; $aref->@*; $aref->@[@indices]; ... etc ... =item * L<Prototype '%s' overridden by attribute 'prototype(%s)' in %s|perldiag/"Prototype '%s' overridden by attribute 'prototype(%s)' in %s"> (W prototype) A prototype was declared in both the parentheses after the sub name and via the prototype attribute. The prototype in parentheses is useless, since it will be replaced by the prototype from the attribute before it's ever used. =item * L<Scalar value @%s[%s] better written as $%s[%s]|perldiag/"Scalar value @%s[%s] better written as $%s[%s]"> (W syntax) In scalar context, you've used an array index/value slice (indicated by %) to select a single element of an array. Generally it's better to ask for a scalar value (indicated by $). The difference is that C<$foo[&bar]> always behaves like a scalar, both in the value it returns and when evaluating its argument, while C<%foo[&bar]> provides a list context to its subscript, which can do weird things if you're expecting only one subscript. When called in list context, it also returns the index (what C<&bar> returns) in addition to the value. =item * L<Scalar value @%s{%s} better written as $%s{%s}|perldiag/"Scalar value @%s{%s} better written as $%s{%s}"> (W syntax) In scalar context, you've used a hash key/value slice (indicated by %) to select a single element of a hash. Generally it's better to ask for a scalar value (indicated by $). The difference is that C<$foo{&bar}> always behaves like a scalar, both in the value it returns and when evaluating its argument, while C<@foo{&bar}> and provides a list context to its subscript, which can do weird things if you're expecting only one subscript. When called in list context, it also returns the key in addition to the value. =item * L<Setting $E<sol> to a reference to %s as a form of slurp is deprecated, treating as undef|perldiag/"Setting $E<sol> to a reference to %s as a form of slurp is deprecated, treating as undef"> =item * L<Unexpected exit %u|perldiag/"Unexpected exit %u"> (S) exit() was called or the script otherwise finished gracefully when C<PERL_EXIT_WARN> was set in C<PL_exit_flags>. =item * L<Unexpected exit failure %d|perldiag/"Unexpected exit failure %d"> (S) An uncaught die() was called when C<PERL_EXIT_WARN> was set in C<PL_exit_flags>. =item * L<Use of literal control characters in variable names is deprecated|perldiag/"Use of literal control characters in variable names is deprecated"> (D deprecated) Using literal control characters in the source to refer to the ^FOO variables, like $^X and ${^GLOBAL_PHASE} is now deprecated. This only affects code like $\cT, where \cT is a control (like a C<SOH>) in the source code: ${"\cT"} and $^T remain valid. =item * L<Useless use of greediness modifier|perldiag/"Useless use of greediness modifier '%c' in regex; marked by <-- HERE in m/%s/"> This fixes [Perl #42957]. =back =head2 Changes to Existing Diagnostics =over 4 =item * Warnings and errors from the regexp engine are now UTF-8 clean. =item * The "Unknown switch condition" error message has some slight changes. This error triggers when there is an unknown condition in a C<(?(foo))> conditional. The error message used to read: Unknown switch condition (?(%s in regex; But what %s could be was mostly up to luck. For C<(?(foobar))>, you might have seen "fo" or "f". For Unicode characters, you would generally get a corrupted string. The message has been changed to read: Unknown switch condition (?(...)) in regex; Additionally, the C<'E<lt>-- HERE'> marker in the error will now point to the correct spot in the regex. =item * The "%s "\x%X" does not map to Unicode" warning is now correctly listed as a severe warning rather than as a fatal error. =item * Under rare circumstances, one could get a "Can't coerce readonly REF to string" instead of the customary "Modification of a read-only value". This alternate error message has been removed. =item * "Ambiguous use of * resolved as operator *": This and similar warnings about "%" and "&" used to occur in some circumstances where there was no operator of the type cited, so the warning was completely wrong. This has been fixed [perl #117535, #76910]. =item * Warnings about malformed subroutine prototypes are now more consistent in how the prototypes are rendered. Some of these warnings would truncate prototypes containing nulls. In other cases one warning would suppress another. The warning about illegal characters in prototypes no longer says "after '_'" if the bad character came before the underscore. =item * L<Perl folding rules are not up-to-date for 0x%X; please use the perlbug utility to report; in regex; marked by <-- HERE in mE<sol>%sE<sol>|perldiag/"Perl folding rules are not up-to-date for 0x%X; please use the perlbug utility to report; in regex; marked by <-- HERE in m/%s/"> This message is now only in the regexp category, and not in the deprecated category. It is still a default (i.e., severe) warning [perl #89648]. =item * L<%%s[%s] in scalar context better written as $%s[%s]|perldiag/"%%s[%s] in scalar context better written as $%s[%s]"> This warning now occurs for any C<%array[$index]> or C<%hash{key}> known to be in scalar context at compile time. Previously it was worded "Scalar value %%s[%s] better written as $%s[%s]". =item * L<Switch condition not recognized in regex; marked by <-- HERE in mE<sol>%sE<sol>|perldiag/"Switch condition not recognized in regex; marked by <-- HERE in m/%s/">: The description for this diagnostic has been extended to cover all cases where the warning may occur. Issues with the positioning of the arrow indicator have also been resolved. =item * The error messages for C<my($a?$b$c)> and C<my(do{})> now mention "conditional expression" and "do block", respectively, instead of reading 'Can't declare null operation in "my"'. =item * When C<use re "debug"> executes a regex containing a backreference, the debugging output now shows what string is being matched. =item * The now fatal error message C<Character following "\c" must be ASCII> has been reworded as C<Character following "\c" must be printable ASCII> to emphasize that in C<\cI<X>>, I<X> must be a I<printable (non-control)> ASCII character. =back =head1 Utility Changes =head3 L<a2p> =over 4 =item * A possible crash from an off-by-one error when trying to access before the beginning of a buffer has been fixed. [perl #120244] =back =head3 F<bisect.pl> The git bisection tool F<Porting/bisect.pl> has had many enhancements. It is provided as part of the source distribution but not installed because it is not self-contained as it relies on being run from within a git checkout. Note also that it makes no attempt to fix tests, correct runtime bugs or make something useful to install - its purpose is to make minimal changes to get any historical revision of interest to build and run as close as possible to "as-was", and thereby make C<git bisect> easy to use. =over 4 =item * Can optionally run the test case with a timeout. =item * Can now run in-place in a clean git checkout. =item * Can run the test case under C<valgrind>. =item * Can apply user supplied patches and fixes to the source checkout before building. =item * Now has fixups to enable building several more historical ranges of bleadperl, which can be useful for pinpointing the origins of bugs or behaviour changes. =back =head3 L<find2perl> =over 4 =item * L<find2perl> now handles C<?> wildcards correctly. [perl #113054] =back =head3 L<perlbug> =over 4 =item * F<perlbug> now has a C<-p> option for attaching patches with a bug report. =item * L<perlbug> has been modified to supply the report template with CRLF line endings on Windows. [L<perl #121277|https://rt.perl.org/Public/Bug/Display.html?id=121277>] =item * L<perlbug> now makes as few assumptions as possible about the encoding of the report. This will likely change in the future to assume UTF-8 by default but allow a user override. =back =head1 Configuration and Compilation =over 4 =item * The F<Makefile.PL> for L<SDBM_File> now generates a better F<Makefile>, which avoids a race condition during parallel makes, which could cause the build to fail. This is the last known parallel make problem (on *nix platforms), and therefore we believe that a parallel make should now always be error free. =item * F<installperl> and F<installman>'s option handling has been refactored to use L<Getopt::Long>. Both are used by the F<Makefile> C<install> targets, and are not installed, so these changes are only likely to affect custom installation scripts. =over 4 =item * Single letter options now also have long names. =item * Invalid options are now rejected. =item * Command line arguments that are not options are now rejected. =item * Each now has a C<--help> option to display the usage message. =back The behaviour for all valid documented invocations is unchanged. =item * Where possible, the build now avoids recursive invocations of F<make> when building pure-Perl extensions, without removing any parallelism from the build. Currently around 80 extensions can be processed directly by the F<make_ext.pl> tool, meaning that 80 invocations of F<make> and 160 invocations of F<miniperl> are no longer made. =item * The build system now works correctly when compiling under GCC or Clang with link-time optimization enabled (the C<-flto> option). [perl #113022] =item * Distinct library basenames with C<d_libname_unique>. When compiling perl with this option, the library files for XS modules are named something "unique" -- for example, Hash/Util/Util.so becomes Hash/Util/PL_Hash__Util.so. This behavior is similar to what currently happens on VMS, and serves as groundwork for the Android port. =item * C<sysroot> option to indicate the logical root directory under gcc and clang. When building with this option set, both Configure and the compilers search for all headers and libraries under this new sysroot, instead of /. This is a huge time saver if cross-compiling, but can also help on native builds if your toolchain's files have non-standard locations. =item * The cross-compilation model has been renovated. There's several new options, and some backwards-incompatible changes: We now build binaries for miniperl and generate_uudmap to be used on the host, rather than running every miniperl call on the target; this means that, short of 'make test', we no longer need access to the target system once Configure is done. You can provide already-built binaries through the C<hostperl> and C<hostgenerate> options to Configure. Additionally, if targeting an EBCDIC platform from an ASCII host, or viceversa, you'll need to run Configure with C<-Uhostgenerate>, to indicate that generate_uudmap should be run on the target. Finally, there's also a way of having Configure end early, right after building the host binaries, by cross-compiling without specifying a C<targethost>. The incompatible changes include no longer using xconfig.h, xlib, or Cross.pm, so canned config files and Makefiles will have to be updated. =item * Related to the above, there is now a way of specifying the location of sh (or equivalent) on the target system: C<targetsh>. For example, Android has its sh in /system/bin/sh, so if cross-compiling from a more normal Unixy system with sh in /bin/sh, "targetsh" would end up as /system/bin/sh, and "sh" as /bin/sh. =item * By default, B<gcc> 4.9 does some optimizations that break perl. The B<-fwrapv> option disables those optimizations (and probably others), so for B<gcc> 4.3 and later (since the there might be similar problems lurking on older versions too, but B<-fwrapv> was broken before 4.3, and the optimizations probably won't go away), F<Configure> now adds B<-fwrapv> unless the user requests B<-fno-wrapv>, which disables B<-fwrapv>, or B<-fsanitize=undefined>, which turns the overflows B<-fwrapv> ignores into runtime errors. [L<perl #121505|https://rt.perl.org/Public/Bug/Display.html?id=121505>] =back =head1 Testing =over 4 =item * The C<test.valgrind> make target now allows tests to be run in parallel. This target allows Perl's test suite to be run under Valgrind, which detects certain sorts of C programming errors, though at significant cost in running time. On suitable hardware, allowing parallel execution claws back a lot of that additional cost. [perl #121431] =item * Various tests in F<t/porting/> are no longer skipped when the perl F<.git> directory is outside the perl tree and pointed to by C<$GIT_DIR>. [perl #120505] =item * The test suite no longer fails when the user's interactive shell maintains a C<$PWD> environment variable, but the F</bin/sh> used for running tests doesn't. =back =head1 Platform Support =head2 New Platforms =over 4 =item Android Perl can now be built for Android, either natively or through cross-compilation, for all three currently available architectures (ARM, MIPS, and x86), on a wide range of versions. =item Bitrig Compile support has been added for Bitrig, a fork of OpenBSD. =item FreeMiNT Support has been added for FreeMiNT, a free open-source OS for the Atari ST system and its successors, based on the original MiNT that was officially adopted by Atari. =item Synology Synology ships its NAS boxes with a lean Linux distribution (DSM) on relative cheap CPU's (like the Marvell Kirkwood mv6282 - ARMv5tel or Freescale QorIQ P1022 ppc - e500v2) not meant for workstations or development. These boxes should build now. The basic problems are the non-standard location for tools. =back =head2 Discontinued Platforms =over 4 =item C<sfio> Code related to supporting the C<sfio> I/O system has been removed. Perl 5.004 added support to use the native API of C<sfio>, AT&T's Safe/Fast I/O library. This code still built with v5.8.0, albeit with many regression tests failing, but was inadvertently broken before the v5.8.1 release, meaning that it has not worked on any version of Perl released since then. In over a decade we have received no bug reports about this, hence it is clear that no-one is using this functionality on any version of Perl that is still supported to any degree. =item AT&T 3b1 Configure support for the 3b1, also known as the AT&T Unix PC (and the similar AT&T 7300), has been removed. =item DG/UX DG/UX was a Unix sold by Data General. The last release was in April 2001. It only runs on Data General's own hardware. =item EBCDIC In the absence of a regular source of smoke reports, code intended to support native EBCDIC platforms will be removed from perl before 5.22.0. =back =head2 Platform-Specific Notes =over 4 =item Cygwin =over 4 =item * recv() on a connected handle would populate the returned sender address with whatever happened to be in the working buffer. recv() now uses a workaround similar to the Win32 recv() wrapper and returns an empty string when recvfrom(2) doesn't modify the supplied address length. [perl #118843] =item * Fixed a build error in cygwin.c on Cygwin 1.7.28. Tests now handle the errors that occur when C<cygserver> isn't running. =back =item GNU/Hurd The BSD compatibility library C<libbsd> is no longer required for builds. =item Linux The hints file now looks for C<libgdbm_compat> only if C<libgdbm> itself is also wanted. The former is never useful without the latter, and in some circumstances, including it could actually prevent building. =item Mac OS The build system now honors an C<ld> setting supplied by the user running F<Configure>. =item MidnightBSD C<objformat> was removed from version 0.4-RELEASE of MidnightBSD and had been deprecated on earlier versions. This caused the build environment to be erroneously configured for C<a.out> rather than C<elf>. This has been now been corrected. =item Mixed-endian platforms The code supporting C<pack> and C<unpack> operations on mixed endian platforms has been removed. We believe that Perl has long been unable to build on mixed endian architectures (such as PDP-11s), so we don't think that this change will affect any platforms which were able to build v5.18.0. =item VMS =over 4 =item * The C<PERL_ENV_TABLES> feature to control the population of %ENV at perl start-up was broken in Perl 5.16.0 but has now been fixed. =item * Skip access checks on remotes in opendir(). [perl #121002] =item * A check for glob metacharacters in a path returned by the L<C<glob()>|perlfunc/glob> operator has been replaced with a check for VMS wildcard characters. This saves a significant number of unnecessary L<C<lstat()>|perlfunc/lstat> calls such that some simple glob operations become 60-80% faster. =back =item Win32 =over 4 =item * C<rename> and C<link> on Win32 now set $! to ENOSPC and EDQUOT when appropriate. [perl #119857] =item * The BUILD_STATIC and ALL_STATIC makefile options for linking some or (nearly) all extensions statically (into perl520.dll, and into a separate perl-static.exe too) were broken for MinGW builds. This has now been fixed. The ALL_STATIC option has also been improved to include the Encode and Win32 extensions (for both VC++ and MinGW builds). =item * Support for building with Visual C++ 2013 has been added. There are currently two possible test failures (see L<perlwin32/"Testing Perl on Windows">) which will hopefully be resolved soon. =item * Experimental support for building with Intel C++ Compiler has been added. The nmake makefile (win32/Makefile) and the dmake makefile (win32/makefile.mk) can be used. A "nmake test" will not pass at this time due to F<cpan/CGI/t/url.t>. =item * Killing a process tree with L<perlfunc/kill> and a negative signal, was broken starting in 5.18.0. In this bug, C<kill> always returned 0 for a negative signal even for valid PIDs, and no processes were terminated. This has been fixed [perl #121230]. =item * The time taken to build perl on Windows has been reduced quite significantly (time savings in the region of 30-40% are typically seen) by reducing the number of, usually failing, I/O calls for each L<C<require()>|perlfunc/require> (for B<miniperl.exe> only). [L<perl #121119|https://rt.perl.org/Public/Bug/Display.html?id=121119>] =item * About 15 minutes of idle sleeping was removed from running C<make test> due to a bug in which the timeout monitor used for tests could not be cancelled once the test completes, and the full timeout period elapsed before running the next test file. [L<perl #121395|https://rt.perl.org/Public/Bug/Display.html?id=121395>] =item * On a perl built without pseudo-fork (pseudo-fork builds were not affected by this bug), killing a process tree with L<C<kill()>|perlfunc/kill> and a negative signal resulted in C<kill()> inverting the returned value. For example, if C<kill()> killed 1 process tree PID then it returned 0 instead of 1, and if C<kill()> was passed 2 invalid PIDs then it returned 2 instead of 0. This has probably been the case since the process tree kill feature was implemented on Win32. It has now been corrected to follow the documented behaviour. [L<perl #121230|https://rt.perl.org/Public/Bug/Display.html?id=121230>] =item * When building a 64-bit perl, an uninitialized memory read in B<miniperl.exe>, used during the build process, could lead to a 4GB B<wperl.exe> being created. This has now been fixed. (Note that B<perl.exe> itself was unaffected, but obviously B<wperl.exe> would have been completely broken.) [L<perl #121471|https://rt.perl.org/Public/Bug/Display.html?id=121471>] =item * Perl can now be built with B<gcc> version 4.8.1 from L<http://www.mingw.org>. This was previously broken due to an incorrect definition of DllMain() in one of perl's source files. Earlier B<gcc> versions were also affected when using version 4 of the w32api package. Versions of B<gcc> available from L<http://mingw-w64.sourceforge.net/> were not affected. [L<perl #121643|https://rt.perl.org/Public/Bug/Display.html?id=121643>] =item * The test harness now has no failures when perl is built on a FAT drive with the Windows OS on an NTFS drive. [L<perl #21442|https://rt.perl.org/Public/Bug/Display.html?id=21442>] =item * When cloning the context stack in fork() emulation, Perl_cx_dup() would crash accessing parameter information for context stack entries that included no parameters, as with C<&foo;>. [L<perl #121721|https://rt.perl.org/Public/Bug/Display.html?id=121721>] =item * Introduced by L<perl #113536|https://rt.perl.org/Public/Bug/Display.html?id=113536>, a memory leak on every call to C<system> and backticks (C< `` >), on most Win32 Perls starting from 5.18.0 has been fixed. The memory leak only occurred if you enabled pseudo-fork in your build of Win32 Perl, and were running that build on Server 2003 R2 or newer OS. The leak does not appear on WinXP SP3. [L<perl #121676|https://rt.perl.org/Public/Bug/Display.html?id=121676>] =back =item WinCE =over 4 =item * The building of XS modules has largely been restored. Several still cannot (yet) be built but it is now possible to build Perl on WinCE with only a couple of further patches (to L<Socket> and L<ExtUtils::MakeMaker>), hopefully to be incorporated soon. =item * Perl can now be built in one shot with no user intervention on WinCE by running C<nmake -f Makefile.ce all>. Support for building with EVC (Embedded Visual C++) 4 has been restored. Perl can also be built using Smart Devices for Visual C++ 2005 or 2008. =back =back =head1 Internal Changes =over 4 =item * The internal representation has changed for the match variables $1, $2 etc., $`, $&, $', ${^PREMATCH}, ${^MATCH} and ${^POSTMATCH}. It uses slightly less memory, avoids string comparisons and numeric conversions during lookup, and uses 23 fewer lines of C. This change should not affect any external code. =item * Arrays now use NULL internally to represent unused slots, instead of &PL_sv_undef. &PL_sv_undef is no longer treated as a special value, so av_store(av, 0, &PL_sv_undef) will cause element 0 of that array to hold a read-only undefined scalar. C<$array[0] = anything> will croak and C<\$array[0]> will compare equal to C<\undef>. =item * The SV returned by HeSVKEY_force() now correctly reflects the UTF8ness of the underlying hash key when that key is not stored as a SV. [perl #79074] =item * Certain rarely used functions and macros available to XS code are now deprecated. These are: C<utf8_to_uvuni_buf> (use C<utf8_to_uvchr_buf> instead), C<valid_utf8_to_uvuni> (use C<utf8_to_uvchr_buf> instead), C<NATIVE_TO_NEED> (this did not work properly anyway), and C<ASCII_TO_NEED> (this did not work properly anyway). Starting in this release, almost never does application code need to distinguish between the platform's character set and Latin1, on which the lowest 256 characters of Unicode are based. New code should not use C<utf8n_to_uvuni> (use C<utf8_to_uvchr_buf> instead), nor C<uvuni_to_utf8> (use C<uvchr_to_utf8> instead), =item * The Makefile shortcut targets for many rarely (or never) used testing and profiling targets have been removed, or merged into the only other Makefile target that uses them. Specifically, these targets are gone, along with documentation that referenced them or explained how to use them: check.third check.utf16 check.utf8 coretest minitest.prep minitest.utf16 perl.config.dashg perl.config.dashpg perl.config.gcov perl.gcov perl.gprof perl.gprof.config perl.pixie perl.pixie.atom perl.pixie.config perl.pixie.irix perl.third perl.third.config perl.valgrind.config purecovperl pureperl quantperl test.deparse test.taintwarn test.third test.torture test.utf16 test.utf8 test_notty.deparse test_notty.third test_notty.valgrind test_prep.third test_prep.valgrind torturetest ucheck ucheck.third ucheck.utf16 ucheck.valgrind utest utest.third utest.utf16 utest.valgrind It's still possible to run the relevant commands by "hand" - no underlying functionality has been removed. =item * It is now possible to keep Perl from initializing locale handling. For the most part, Perl doesn't pay attention to locale. (See L<perllocale>.) Nonetheless, until now, on startup, it has always initialized locale handling to the system default, just in case the program being executed ends up using locales. (This is one of the first things a locale-aware program should do, long before Perl knows if it will actually be needed or not.) This works well except when Perl is embedded in another application which wants a locale that isn't the system default. Now, if the environment variable C<PERL_SKIP_LOCALE_INIT> is set at the time Perl is started, this initialization step is skipped. Prior to this, on Windows platforms, the only workaround for this deficiency was to use a hacked-up copy of internal Perl code. Applications that need to use older Perls can discover if the embedded Perl they are using needs the workaround by testing that the C preprocessor symbol C<HAS_SKIP_LOCALE_INIT> is not defined. [RT #38193] =item * C<BmRARE> and C<BmPREVIOUS> have been removed. They were not used anywhere and are not part of the API. For XS modules, they are now #defined as 0. =item * C<sv_force_normal>, which usually croaks on read-only values, used to allow read-only values to be modified at compile time. This has been changed to croak on read-only values regardless. This change uncovered several core bugs. =item * Perl's new copy-on-write mechanism (which is now enabled by default), allows any C<SvPOK> scalar to be automatically upgraded to a copy-on-write scalar when copied. A reference count on the string buffer is stored in the string buffer itself. For example: $ perl -MDevel::Peek -e'$a="abc"; $b = $a; Dump $a; Dump $b' SV = PV(0x260cd80) at 0x2620ad8 REFCNT = 1 FLAGS = (POK,IsCOW,pPOK) PV = 0x2619bc0 "abc"\0 CUR = 3 LEN = 16 COW_REFCNT = 1 SV = PV(0x260ce30) at 0x2620b20 REFCNT = 1 FLAGS = (POK,IsCOW,pPOK) PV = 0x2619bc0 "abc"\0 CUR = 3 LEN = 16 COW_REFCNT = 1 Note that both scalars share the same PV buffer and have a COW_REFCNT greater than zero. This means that XS code which wishes to modify the C<SvPVX()> buffer of an SV should call C<SvPV_force()> or similar first, to ensure a valid (and unshared) buffer, and to call C<SvSETMAGIC()> afterwards. This in fact has always been the case (for example hash keys were already copy-on-write); this change just spreads the COW behaviour to a wider variety of SVs. One important difference is that before 5.18.0, shared hash-key scalars used to have the C<SvREADONLY> flag set; this is no longer the case. This new behaviour can still be disabled by running F<Configure> with B<-Accflags=-DPERL_NO_COW>. This option will probably be removed in Perl 5.22. =item * C<PL_sawampersand> is now a constant. The switch this variable provided (to enable/disable the pre-match copy depending on whether C<$&> had been seen) has been removed and replaced with copy-on-write, eliminating a few bugs. The previous behaviour can still be enabled by running F<Configure> with B<-Accflags=-DPERL_SAWAMPERSAND>. =item * The functions C<my_swap>, C<my_htonl> and C<my_ntohl> have been removed. It is unclear why these functions were ever marked as I<A>, part of the API. XS code can't call them directly, as it can't rely on them being compiled. Unsurprisingly, no code on CPAN references them. =item * The signature of the C<Perl_re_intuit_start()> regex function has changed; the function pointer C<intuit> in the regex engine plugin structure has also changed accordingly. A new parameter, C<strbeg> has been added; this has the same meaning as the same-named parameter in C<Perl_regexec_flags>. Previously intuit would try to guess the start of the string from the passed SV (if any), and would sometimes get it wrong (e.g. with an overloaded SV). =item * The signature of the C<Perl_regexec_flags()> regex function has changed; the function pointer C<exec> in the regex engine plugin structure has also changed to match. The C<minend> parameter now has type C<SSize_t> to better support 64-bit systems. =item * XS code may use various macros to change the case of a character or code point (for example C<toLOWER_utf8()>). Only a couple of these were documented until now; and now they should be used in preference to calling the underlying functions. See L<perlapi/Character case changing>. =item * The code dealt rather inconsistently with uids and gids. Some places assumed that they could be safely stored in UVs, others in IVs, others in ints. Four new macros are introduced: SvUID(), sv_setuid(), SvGID(), and sv_setgid() =item * C<sv_pos_b2u_flags> has been added to the API. It is similar to C<sv_pos_b2u>, but supports long strings on 64-bit platforms. =item * C<PL_exit_flags> can now be used by perl embedders or other XS code to have perl C<warn> or C<abort> on an attempted exit. [perl #52000] =item * Compiling with C<-Accflags=-PERL_BOOL_AS_CHAR> now allows C99 and C++ compilers to emulate the aliasing of C<bool> to C<char> that perl does for C89 compilers. [perl #120314] =item * The C<sv> argument in L<perlapi/sv_2pv_flags>, L<perlapi/sv_2iv_flags>, L<perlapi/sv_2uv_flags>, and L<perlapi/sv_2nv_flags> and their older wrappers sv_2pv, sv_2iv, sv_2uv, sv_2nv, is now non-NULL. Passing NULL now will crash. When the non-NULL marker was introduced en masse in 5.9.3 the functions were marked non-NULL, but since the creation of the SV API in 5.0 alpha 2, if NULL was passed, the functions returned 0 or false-type values. The code that supports C<sv> argument being non-NULL dates to 5.0 alpha 2 directly, and indirectly to Perl 1.0 (pre 5.0 api). The lack of documentation that the functions accepted a NULL C<sv> was corrected in 5.11.0 and between 5.11.0 and 5.19.5 the functions were marked NULLOK. As an optimization the NULLOK code has now been removed, and the functions became non-NULL marked again, because core getter-type macros never pass NULL to these functions and would crash before ever passing NULL. The only way a NULL C<sv> can be passed to sv_2*v* functions is if XS code directly calls sv_2*v*. This is unlikely as XS code uses Sv*V* macros to get the underlying value out of the SV. One possible situation which leads to a NULL C<sv> being passed to sv_2*v* functions, is if XS code defines its own getter type Sv*V* macros, which check for NULL B<before> dereferencing and checking the SV's flags through public API Sv*OK* macros or directly using private API C<SvFLAGS>, and if C<sv> is NULL, then calling the sv_2*v functions with a NULL litteral or passing the C<sv> containing a NULL value. =item * newATTRSUB is now a macro The public API newATTRSUB was previously a macro to the private function Perl_newATTRSUB. Function Perl_newATTRSUB has been removed. newATTRSUB is now macro to a different internal function. =item * Changes in warnings raised by C<utf8n_to_uvchr()> This bottom level function decodes the first character of a UTF-8 string into a code point. It is accessible to C<XS> level code, but it's discouraged from using it directly. There are higher level functions that call this that should be used instead, such as L<perlapi/utf8_to_uvchr_buf>. For completeness though, this documents some changes to it. Now, tests for malformations are done before any tests for other potential issues. One of those issues involves code points so large that they have never appeared in any official standard (the current standard has scaled back the highest acceptable code point from earlier versions). It is possible (though not done in CPAN) to warn and/or forbid these code points, while accepting smaller code points that are still above the legal Unicode maximum. The warning message for this now includes the code point if representable on the machine. Previously it always displayed raw bytes, which is what it still does for non-representable code points. =item * Regexp engine changes that affect the pluggable regex engine interface Many flags that used to be exposed via regexp.h and used to populate the extflags member of struct regexp have been removed. These fields were technically private to Perl's own regexp engine and should not have been exposed there in the first place. The affected flags are: RXf_NOSCAN RXf_CANY_SEEN RXf_GPOS_SEEN RXf_GPOS_FLOAT RXf_ANCH_BOL RXf_ANCH_MBOL RXf_ANCH_SBOL RXf_ANCH_GPOS As well as the follow flag masks: RXf_ANCH_SINGLE RXf_ANCH All have been renamed to PREGf_ equivalents and moved to regcomp.h. The behavior previously achieved by setting one or more of the RXf_ANCH_ flags (via the RXf_ANCH mask) have now been replaced by a *single* flag bit in extflags: RXf_IS_ANCHORED pluggable regex engines which previously used to set these flags should now set this flag ALONE. =item * The Perl core now consistently uses C<av_tindex()> ("the top index of an array") as a more clearly-named synonym for C<av_len()>. =item * The obscure interpreter variable C<PL_timesbuf> is expected to be removed early in the 5.21.x development series, so that Perl 5.22.0 will not provide it to XS authors. While the variable still exists in 5.20.0, we hope that this advance warning of the deprecation will help anyone who is using that variable. =back =head1 Selected Bug Fixes =head2 Regular Expressions =over 4 =item * Fixed a small number of regexp constructions that could either fail to match or crash perl when the string being matched against was allocated above the 2GB line on 32-bit systems. [RT #118175] =item * Various memory leaks involving the parsing of the C<(?[...])> regular expression construct have been fixed. =item * C<(?[...])> now allows interpolation of precompiled patterns consisting of C<(?[...])> with bracketed character classes inside (C<$pat = S<qr/(?[ [a] ])/;> S</(?[ $pat ])/>>). Formerly, the brackets would confuse the regular expression parser. =item * The "Quantifier unexpected on zero-length expression" warning message could appear twice starting in Perl v5.10 for a regular expression also containing alternations (e.g., "a|b") triggering the trie optimisation. =item * Perl v5.18 inadvertently introduced a bug whereby interpolating mixed up- and down-graded UTF-8 strings in a regex could result in malformed UTF-8 in the pattern: specifically if a downgraded character in the range C<\x80..\xff> followed a UTF-8 string, e.g. utf8::upgrade( my $u = "\x{e5}"); utf8::downgrade(my $d = "\x{e5}"); /$u$d/ [RT #118297] =item * In regular expressions containing multiple code blocks, the values of C<$1>, C<$2>, etc., set by nested regular expression calls would leak from one block to the next. Now these variables always refer to the outer regular expression at the start of an embedded block [perl #117917]. =item * C</$qr/p> was broken in Perl 5.18.0; the C</p> flag was ignored. This has been fixed. [perl #118213] =item * Starting in Perl 5.18.0, a construct like C</[#](?{})/x> would have its C<#> incorrectly interpreted as a comment. The code block would be skipped, unparsed. This has been corrected. =item * Starting in Perl 5.001, a regular expression like C</[#$a]/x> or C</[#]$a/x> would have its C<#> incorrectly interpreted as a comment, so the variable would not interpolate. This has been corrected. [perl #45667] =item * Perl 5.18.0 inadvertently made dereferenced regular expressions S<(C<${ qr// }>)> false as booleans. This has been fixed. =item * The use of C<\G> in regular expressions, where it's not at the start of the pattern, is now slightly less buggy (although it is still somewhat problematic). =item * Where a regular expression included code blocks (C</(?{...})/>), and where the use of constant overloading triggered a re-compilation of the code block, the second compilation didn't see its outer lexical scope. This was a regression in Perl 5.18.0. =item * The string position set by C<pos> could shift if the string changed representation internally to or from utf8. This could happen, e.g., with references to objects with string overloading. =item * Taking references to the return values of two C<pos> calls with the same argument, and then assigning a reference to one and C<undef> to the other, could result in assertion failures or memory leaks. =item * Elements of @- and @+ now update correctly when they refer to non-existent captures. Previously, a referenced element (C<$ref = \$-[1]>) could refer to the wrong match after subsequent matches. =item * The code that parses regex backrefs (or ambiguous backref/octals) such as \123 did a simple atoi(), which could wrap round to negative values on long digit strings and cause segmentation faults. This has now been fixed. [perl #119505] =item * Assigning another typeglob to C<*^R> no longer makes the regular expression engine crash. =item * The C<\N> regular expression escape, when used without the curly braces (to mean C<[^\n]>), was ignoring a following C<*> if followed by whitespace under /x. It had been this way since C<\N> to mean C<[^\n]> was introduced in 5.12.0. =item * C<s///>, C<tr///> and C<y///> now work when a wide character is used as the delimiter. [perl #120463] =item * Some cases of unterminated (?...) sequences in regular expressions (e.g., C</(?</>) have been fixed to produce the proper error message instead of "panic: memory wrap". Other cases (e.g., C</(?(/>) have yet to be fixed. =item * When a reference to a reference to an overloaded object was returned from a regular expression C<(??{...})> code block, an incorrect implicit dereference could take place if the inner reference had been returned by a code block previously. =item * A tied variable returned from C<(??{...})> sees the inner values of match variables (i.e., the $1 etc. from any matches inside the block) in its FETCH method. This was not the case if a reference to an overloaded object was the last thing assigned to the tied variable. Instead, the match variables referred to the outer pattern during the FETCH call. =item * Fix unexpected tainting via regexp using locale. Previously, under certain conditions, the use of character classes could cause tainting when it shouldn't. Some character classes are locale-dependent, but before this patch, sometimes tainting was happening even for character classes that don't depend on the locale. [perl #120675] =item * Under certain conditions, Perl would throw an error if in a lookbehind assertion in a regexp, the assertion referred to a named subpattern, complaining the lookbehind was variable when it wasn't. This has been fixed. [perl #120600], [perl #120618]. The current fix may be improved on in the future. =item * C<$^R> wasn't available outside of the regular expression that initialized it. [perl #121070] =item * A large set of fixes and refactoring for re_intuit_start() was merged, the highlights are: =over =item * Fixed a panic when compiling the regular expression C</\x{100}[xy]\x{100}{2}/>. =item * Fixed a performance regression when performing a global pattern match against a UTF-8 string. [perl #120692] =item * Fixed another performance issue where matching a regular expression like C</ab.{1,2}x/> against a long UTF-8 string would unnecessarily calculate byte offsets for a large portion of the string. [perl #120692] =back =item * Fixed an alignment error when compiling regular expressions when built with GCC on HP-UX 64-bit. =item * On 64-bit platforms C<pos> can now be set to a value higher than 2**31-1. [perl #72766] =back =head2 Perl 5 Debugger and -d =over 4 =item * The debugger's C<man> command been fixed. It was broken in the v5.18.0 release. The C<man> command is aliased to the names C<doc> and C<perldoc> - all now work again. =item * C<@_> is now correctly visible in the debugger, fixing a regression introduced in v5.18.0's debugger. [RT #118169] =item * Under copy-on-write builds (the default as of 5.20.0) C<< ${'_<-e'}[0] >> no longer gets mangled. This is the first line of input saved for the debugger's use for one-liners [perl #118627]. =item * On non-threaded builds, setting C<${"_E<lt>filename"}> to a reference or typeglob no longer causes C<__FILE__> and some error messages to produce a corrupt string, and no longer prevents C<#line> directives in string evals from providing the source lines to the debugger. Threaded builds were unaffected. =item * Starting with Perl 5.12, line numbers were off by one if the B<-d> switch was used on the #! line. Now they are correct. =item * C<*DB::DB = sub {} if 0> no longer stops Perl's debugging mode from finding C<DB::DB> subs declared thereafter. =item * C<%{'_<...'}> hashes now set breakpoints on the corresponding C<@{'_<...'}> rather than whichever array C<@DB::dbline> is aliased to. [perl #119799] =item * Call set-magic when setting $DB::sub. [perl #121255] =item * The debugger's "n" command now respects lvalue subroutines and steps over them [perl #118839]. =back =head2 Lexical Subroutines =over 4 =item * Lexical constants (C<my sub a() { 42 }>) no longer crash when inlined. =item * Parameter prototypes attached to lexical subroutines are now respected when compiling sub calls without parentheses. Previously, the prototypes were honoured only for calls I<with> parentheses. [RT #116735] =item * Syntax errors in lexical subroutines in combination with calls to the same subroutines no longer cause crashes at compile time. =item * Deep recursion warnings no longer crash lexical subroutines. [RT #118521] =item * The dtrace sub-entry probe now works with lexical subs, instead of crashing [perl #118305]. =item * Undefining an inlinable lexical subroutine (C<my sub foo() { 42 } undef &foo>) would result in a crash if warnings were turned on. =item * An undefined lexical sub used as an inherited method no longer crashes. =item * The presence of a lexical sub named "CORE" no longer stops the CORE:: prefix from working. =back =head2 Everything Else =over 4 =item * The OP allocation code now returns correctly aligned memory in all cases for C<struct pmop>. Previously it could return memory only aligned to a 4-byte boundary, which is not correct for an ithreads build with 64 bit IVs on some 32 bit platforms. Notably, this caused the build to fail completely on sparc GNU/Linux. [RT #118055] =item * Evaluating large hashes in scalar context is now much faster, as the number of used chains in the hash is now cached for larger hashes. Smaller hashes continue not to store it and calculate it when needed, as this saves one IV. That would be 1 IV overhead for every object built from a hash. [RT #114576] =item * Perl v5.16 inadvertently introduced a bug whereby calls to XSUBs that were not visible at compile time were treated as lvalues and could be assigned to, even when the subroutine was not an lvalue sub. This has been fixed. [RT #117947] =item * In Perl v5.18.0 dualvars that had an empty string for the string part but a non-zero number for the number part starting being treated as true. In previous versions they were treated as false, the string representation taking precedeence. The old behaviour has been restored. [RT #118159] =item * Since Perl v5.12, inlining of constants that override built-in keywords of the same name had countermanded C<use subs>, causing subsequent mentions of the constant to use the built-in keyword instead. This has been fixed. =item * The warning produced by C<-l $handle> now applies to IO refs and globs, not just to glob refs. That warning is also now UTF8-clean. [RT #117595] =item * C<delete local $ENV{nonexistent_env_var}> no longer leaks memory. =item * C<sort> and C<require> followed by a keyword prefixed with C<CORE::> now treat it as a keyword, and not as a subroutine or module name. [RT #24482] =item * Through certain conundrums, it is possible to cause the current package to be freed. Certain operators (C<bless>, C<reset>, C<open>, C<eval>) could not cope and would crash. They have been made more resilient. [RT #117941] =item * Aliasing filehandles through glob-to-glob assignment would not update internal method caches properly if a package of the same name as the filehandle existed, resulting in filehandle method calls going to the package instead. This has been fixed. =item * C<./Configure -de -Dusevendorprefix> didn't default. [RT #64126] =item * The C<Statement unlikely to be reached> warning was listed in L<perldiag> as an C<exec>-category warning, but was enabled and disabled by the C<syntax> category. On the other hand, the C<exec> category controlled its fatal-ness. It is now entirely handled by the C<exec> category. =item * The "Replacement list is longer that search list" warning for C<tr///> and C<y///> no longer occurs in the presence of the C</c> flag. [RT #118047] =item * Stringification of NVs are not cached so that the lexical locale controls stringification of the decimal point. [perl #108378] [perl #115800] =item * There have been several fixes related to Perl's handling of locales. perl #38193 was described above in L</Internal Changes>. Also fixed is #118197, where the radix (decimal point) character had to be an ASCII character (which doesn't work for some non-Western languages); and #115808, in which C<POSIX::setlocale()> on failure returned an C<undef> which didn't warn about not being defined even if those warnings were enabled. =item * Compiling a C<split> operator whose third argument is a named constant evaluating to 0 no longer causes the constant's value to change. =item * A named constant used as the second argument to C<index> no longer gets coerced to a string if it is a reference, regular expression, dualvar, etc. =item * A named constant evaluating to the undefined value used as the second argument to C<index> no longer produces "uninitialized" warnings at compile time. It will still produce them at run time. =item * When a scalar was returned from a subroutine in @INC, the referenced scalar was magically converted into an IO thingy, possibly resulting in "Bizarre copy" errors if that scalar continued to be used elsewhere. Now Perl uses an internal copy of the scalar instead. =item * Certain uses of the C<sort> operator are optimised to modify an array in place, such as C<@a = sort @a>. During the sorting, the array is made read-only. If a sort block should happen to die, then the array remained read-only even outside the C<sort>. This has been fixed. =item * C<$a> and C<$b> inside a sort block are aliased to the actual arguments to C<sort>, so they can be modified through those two variables. This did not always work, e.g., for lvalue subs and C<$#ary>, and probably many other operators. It works now. =item * The arguments to C<sort> are now all in list context. If the C<sort> itself were called in void or scalar context, then I<some>, but not all, of the arguments used to be in void or scalar context. =item * Subroutine prototypes with Unicode characters above U+00FF were getting mangled during closure cloning. This would happen with subroutines closing over lexical variables declared outside, and with lexical subs. =item * C<UNIVERSAL::can> now treats its first argument the same way that method calls do: Typeglobs and glob references with non-empty IO slots are treated as handles, and strings are treated as filehandles, rather than packages, if a handle with that name exists [perl #113932]. =item * Method calls on typeglobs (e.g., C<< *ARGV->getline >>) used to stringify the typeglob and then look it up again. Combined with changes in Perl 5.18.0, this allowed C<< *foo->bar >> to call methods on the "foo" package (like C<< foo->bar >>). In some cases it could cause the method to be called on the wrong handle. Now a typeglob argument is treated as a handle (just like C<< (\*foo)->bar >>), or, if its IO slot is empty, an error is raised. =item * Assigning a vstring to a tied variable or to a subroutine argument aliased to a nonexistent hash or array element now works, without flattening the vstring into a regular string. =item * C<pos>, C<tie>, C<tied> and C<untie> did not work properly on subroutine arguments aliased to nonexistent hash and array elements [perl #77814, #27010]. =item * The C<< => >> fat arrow operator can now quote built-in keywords even if it occurs on the next line, making it consistent with how it treats other barewords. =item * Autovivifying a subroutine stub via C<\&$glob> started causing crashes in Perl 5.18.0 if the $glob was merely a copy of a real glob, i.e., a scalar that had had a glob assigned to it. This has been fixed. [perl #119051] =item * Perl used to leak an implementation detail when it came to referencing the return values of certain operators. C<for ($a+$b) { warn \$_; warn \$_ }> used to display two different memory addresses, because the C<\> operator was copying the variable. Under threaded builds, it would also happen for constants (C<for(1) { ... }>). This has been fixed. [perl #21979, #78194, #89188, #109746, #114838, #115388] =item * The range operator C<..> was returning the same modifiable scalars with each call, unless it was the only thing in a C<foreach> loop header. This meant that changes to values within the list returned would be visible the next time the operator was executed. [perl #3105] =item * Constant folding and subroutine inlining no longer cause operations that would normally return new modifiable scalars to return read-only values instead. =item * Closures of the form C<sub () { $some_variable }> are no longer inlined, causing changes to the variable to be ignored by callers of the subroutine. [perl #79908] =item * Return values of certain operators such as C<ref> would sometimes be shared between recursive calls to the same subroutine, causing the inner call to modify the value returned by C<ref> in the outer call. This has been fixed. =item * C<__PACKAGE__> and constants returning a package name or hash key are now consistently read-only. In various previous Perl releases, they have become mutable under certain circumstances. =item * Enabling "used once" warnings no longer causes crashes on stash circularities created at compile time (C<*Foo::Bar::Foo:: = *Foo::>). =item * Undef constants used in hash keys (C<use constant u =E<gt> undef; $h{+u}>) no longer produce "uninitialized" warnings at compile time. =item * Modifying a substitution target inside the substitution replacement no longer causes crashes. =item * The first statement inside a string eval used to use the wrong pragma setting sometimes during constant folding. C<eval 'uc chr 0xe0'> would randomly choose between Unicode, byte, and locale semantics. This has been fixed. =item * The handling of return values of @INC filters (subroutines returned by subroutines in @INC) has been fixed in various ways. Previously tied variables were mishandled, and setting $_ to a reference or typeglob could result in crashes. =item * The C<SvPVbyte> XS function has been fixed to work with tied scalars returning something other than a string. It used to return utf8 in those cases where C<SvPV> would. =item * Perl 5.18.0 inadvertently made C<--> and C<++> crash on dereferenced regular expressions, and stopped C<++> from flattening vstrings. =item * C<bless> no longer dies with "Can't bless non-reference value" if its first argument is a tied reference. =item * C<reset> with an argument no longer skips copy-on-write scalars, regular expressions, typeglob copies, and vstrings. Also, when encountering those or read-only values, it no longer skips any array or hash with the same name. =item * C<reset> with an argument now skips scalars aliased to typeglobs (C<for $z (*foo) { reset "z" }>). Previously it would corrupt memory or crash. =item * C<ucfirst> and C<lcfirst> were not respecting the bytes pragma. This was a regression from Perl 5.12. [perl #117355] =item * Changes to C<UNIVERSAL::DESTROY> now update DESTROY caches in all classes, instead of causing classes that have already had objects destroyed to continue using the old sub. This was a regression in Perl 5.18. [perl #114864] =item * All known false-positive occurrences of the deprecation warning "Useless use of '\'; doesn't escape metacharacter '%c'", added in Perl 5.18.0, have been removed. [perl #119101] =item * The value of $^E is now saved across signal handlers on Windows. [perl #85104] =item * A lexical filehandle (as in C<open my $fh...>) is usually given a name based on the current package and the name of the variable, e.g. "main::$fh". Under recursion, the filehandle was losing the "$fh" part of the name. This has been fixed. =item * Uninitialized values returned by XSUBs are no longer exempt from uninitialized warnings. [perl #118693] =item * C<elsif ("")> no longer erroneously produces a warning about void context. [perl #118753] =item * Passing C<undef> to a subroutine now causes @_ to contain the same read-only undefined scalar that C<undef> returns. Furthermore, C<exists $_[0]> will now return true if C<undef> was the first argument. [perl #7508, #109726] =item * Passing a non-existent array element to a subroutine does not usually autovivify it unless the subroutine modifies its argument. This did not work correctly with negative indices and with non-existent elements within the array. The element would be vivified immediately. The delayed vivification has been extended to work with those. [perl #118691] =item * Assigning references or globs to the scalar returned by $#foo after the @foo array has been freed no longer causes assertion failures on debugging builds and memory leaks on regular builds. =item * On 64-bit platforms, large ranges like 1..1000000000000 no longer crash, but eat up all your memory instead. [perl #119161] =item * C<__DATA__> now puts the C<DATA> handle in the right package, even if the current package has been renamed through glob assignment. =item * When C<die>, C<last>, C<next>, C<redo>, C<goto> and C<exit> unwind the scope, it is possible for C<DESTROY> recursively to call a subroutine or format that is currently being exited. It that case, sometimes the lexical variables inside the sub would start out having values from the outer call, instead of being undefined as they should. This has been fixed. [perl #119311] =item * ${^MPEN} is no longer treated as a synonym for ${^MATCH}. =item * Perl now tries a little harder to return the correct line number in C<(caller)[2]>. [perl #115768] =item * Line numbers inside multiline quote-like operators are now reported correctly. [perl #3643] =item * C<#line> directives inside code embedded in quote-like operators are now respected. =item * Line numbers are now correct inside the second here-doc when two here-doc markers occur on the same line. =item * An optimization in Perl 5.18 made incorrect assumptions causing a bad interaction with the L<Devel::CallParser> CPAN module. If the module was loaded then lexical variables declared in separate statements following a C<my(...)> list might fail to be cleared on scope exit. =item * C<&xsub> and C<goto &xsub> calls now allow the called subroutine to autovivify elements of @_. =item * C<&xsub> and C<goto &xsub> no longer crash if *_ has been undefined and has no ARRAY entry (i.e. @_ does not exist). =item * C<&xsub> and C<goto &xsub> now work with tied @_. =item * Overlong identifiers no longer cause a buffer overflow (and a crash). They started doing so in Perl 5.18. =item * The warning "Scalar value @hash{foo} better written as $hash{foo}" now produces far fewer false positives. In particular, C<@hash{+function_returning_a_list}> and C<@hash{ qw "foo bar baz" }> no longer warn. The same applies to array slices. [perl #28380, #114024] =item * C<$! = EINVAL; waitpid(0, WNOHANG);> no longer goes into an internal infinite loop. [perl #85228] =item * A possible segmentation fault in filehandle duplication has been fixed. =item * A subroutine in @INC can return a reference to a scalar containing the initial contents of the file. However, that scalar was freed prematurely if not referenced elsewhere, giving random results. =item * C<last> no longer returns values that the same statement has accumulated so far, fixing amongst other things the long-standing bug that C<push @a, last> would try to return the @a, copying it like a scalar in the process and resulting in the error, "Bizarre copy of ARRAY in last." [perl #3112] =item * In some cases, closing file handles opened to pipe to or from a process, which had been duplicated into a standard handle, would call perl's internal waitpid wrapper with a pid of zero. With the fix for [perl #85228] this zero pid was passed to C<waitpid>, possibly blocking the process. This wait for process zero no longer occurs. [perl #119893] =item * C<select> used to ignore magic on the fourth (timeout) argument, leading to effects such as C<select> blocking indefinitely rather than the expected sleep time. This has now been fixed. [perl #120102] =item * The class name in C<for my class $foo> is now parsed correctly. In the case of the second character of the class name being followed by a digit (e.g. 'a1b') this used to give the error "Missing $ on loop variable". [perl #120112] =item * Perl 5.18.0 accidentally disallowed C<-bareword> under C<use strict> and C<use integer>. This has been fixed. [perl #120288] =item * C<-a> at the start of a line (or a hyphen with any single letter that is not a filetest operator) no longer produces an erroneous 'Use of "-a" without parentheses is ambiguous' warning. [perl #120288] =item * Lvalue context is now properly propagated into bare blocks and C<if> and C<else> blocks in lvalue subroutines. Previously, arrays and hashes would sometimes incorrectly be flattened when returned in lvalue list context, or "Bizarre copy" errors could occur. [perl #119797] =item * Lvalue context is now propagated to the branches of C<||> and C<&&> (and their alphabetic equivalents, C<or> and C<and>). This means C<foreach (pos $x || pos $y) {...}> now allows C<pos> to be modified through $_. =item * C<stat> and C<readline> remember the last handle used; the former for the special C<_> filehandle, the latter for C<${^LAST_FH}>. C<eval "*foo if 0"> where *foo was the last handle passed to C<stat> or C<readline> could cause that handle to be forgotten if the handle were not opened yet. This has been fixed. =item * Various cases of C<delete $::{a}>, C<delete $::{ENV}> etc. causing a crash have been fixed. [perl #54044] =item * Setting C<$!> to EACCESS before calling C<require> could affect C<require>'s behaviour. This has been fixed. =item * The "Can't use \1 to mean $1 in expression" warning message now only occurs on the right-hand (replacement) part of a substitution. Formerly it could happen in code embedded in the left-hand side, or in any other quote-like operator. =item * Blessing into a reference (C<bless $thisref, $thatref>) has long been disallowed, but magical scalars for the second like C<$/> and those tied were exempt. They no longer are. [perl #119809] =item * Blessing into a reference was accidentally allowed in 5.18 if the class argument were a blessed reference with stale method caches (i.e., whose class had had subs defined since the last method call). They are disallowed once more, as in 5.16. =item * C<< $x->{key} >> where $x was declared as C<my Class $x> no longer crashes if a Class::FIELDS subroutine stub has been declared. =item * C<@$obj{'key'}> and C<${$obj}{key}> used to be exempt from compile-time field checking ("No such class field"; see L<fields>) but no longer are. =item * A nonexistent array element with a large index passed to a subroutine that ties the array and then tries to access the element no longer results in a crash. =item * Declaring a subroutine stub named NEGATIVE_INDICES no longer makes negative array indices crash when the current package is a tied array class. =item * Declaring a C<require>, C<glob>, or C<do> subroutine stub in the CORE::GLOBAL:: package no longer makes compilation of calls to the corresponding functions crash. =item * Aliasing CORE::GLOBAL:: functions to constants stopped working in Perl 5.10 but has now been fixed. =item * When C<`...`> or C<qx/.../> calls a C<readpipe> override, double-quotish interpolation now happens, as is the case when there is no override. Previously, the presence of an override would make these quote-like operators act like C<q{}>, suppressing interpolation. [perl #115330] =item * C<<<<`...`> here-docs (with backticks as the delimiters) now call C<readpipe> overrides. [perl #119827] =item * C<&CORE::exit()> and C<&CORE::die()> now respect L<vmsish> hints. =item * Undefining a glob that triggers a DESTROY method that undefines the same glob is now safe. It used to produce "Attempt to free unreferenced glob pointer" warnings and leak memory. =item * If subroutine redefinition (C<eval 'sub foo{}'> or C<newXS> for XS code) triggers a DESTROY method on the sub that is being redefined, and that method assigns a subroutine to the same slot (C<*foo = sub {}>), C<$_[0]> is no longer left pointing to a freed scalar. Now DESTROY is delayed until the new subroutine has been installed. =item * On Windows, perl no longer calls CloseHandle() on a socket handle. This makes debugging easier on Windows by removing certain irrelevant bad handle exceptions. It also fixes a race condition that made socket functions randomly fail in a Perl process with multiple OS threads, and possible test failures in F<dist/IO/t/cachepropagate-tcp.t>. [perl #120091/118059] =item * Formats involving UTF-8 encoded strings, or strange vars like ties, overloads, or stringified refs (and in recent perls, pure NOK vars) would generally do the wrong thing in formats when the var is treated as a string and repeatedly chopped, as in C<< ^<<<~~ >> and similar. This has now been resolved. [perl #33832/45325/113868/119847/119849/119851] =item * C<< semctl(..., SETVAL, ...) >> would set the semaphore to the top 32-bits of the supplied integer instead of the bottom 32-bits on 64-bit big-endian systems. [perl #120635] =item * C<< readdir() >> now only sets C<$!> on error. C<$!> is no longer set to C<EBADF> when then terminating C<undef> is read from the directory unless the system call sets C<$!>. [perl #118651] =item * C<&CORE::glob> no longer causes an intermittent crash due to perl's stack getting corrupted. [perl #119993] =item * C<open> with layers that load modules (e.g., "<:encoding(utf8)") no longer runs the risk of crashing due to stack corruption. =item * Perl 5.18 broke autoloading via C<< ->SUPER::foo >> method calls by looking up AUTOLOAD from the current package rather than the current package's superclass. This has been fixed. [perl #120694] =item * A longstanding bug causing C<do {} until CONSTANT>, where the constant holds a true value, to read unallocated memory has been resolved. This would usually happen after a syntax error. In past versions of Perl it has crashed intermittently. [perl #72406] =item * Fix HP-UX C<$!> failure. HP-UX strerror() returns an empty string for an unknown error code. This caused an assertion to fail under DEBUGGING builds. Now instead, the returned string for C<"$!"> contains text indicating the code is for an unknown error. =item * Individually-tied elements of @INC (as in C<tie $INC[0]...>) are now handled correctly. Formerly, whether a sub returned by such a tied element would be treated as a sub depended on whether a FETCH had occurred previously. =item * C<getc> on a byte-sized handle after the same C<getc> operator had been used on a utf8 handle used to treat the bytes as utf8, resulting in erratic behavior (e.g., malformed UTF-8 warnings). =item * An initial C<{> at the beginning of a format argument line was always interpreted as the beginning of a block prior to v5.18. In Perl v5.18, it started being treated as an ambiguous token. The parser would guess whether it was supposed to be an anonymous hash constructor or a block based on the contents. Now the previous behavious has been restored. [perl #119973] =item * In Perl v5.18 C<undef *_; goto &sub> and C<local *_; goto &sub> started crashing. This has been fixed. [perl #119949] =item * Backticks (C< `` > or C< qx// >) combined with multiple threads on Win32 could result in output sent to stdout on one thread being captured by backticks of an external command in another thread. This could occur for pseudo-forked processes too, as Win32's pseudo-fork is implemented in terms of threads. [perl #77672] =item * C<< open $fh, ">+", undef >> no longer leaks memory when TMPDIR is set but points to a directory a temporary file cannot be created in. [perl #120951] =item * C< for ( $h{k} || '' ) > no longer auto-vivifies C<$h{k}>. [perl #120374] =item * On Windows machines, Perl now emulates the POSIX use of the environment for locale initialization. Previously, the environment was ignored. See L<perllocale/ENVIRONMENT>. =item * Fixed a crash when destroying a self-referencing GLOB. [perl #121242] =back =head1 Known Problems =over 4 =item * L<IO::Socket> is known to fail tests on AIX 5.3. There is L<a patch|https://rt.perl.org/Ticket/Display.html?id=120835> in the request tracker, #120835, which may be applied to future releases. =item * The following modules are known to have test failures with this version of Perl. Patches have been submitted, so there will hopefully be new releases soon: =over =item * L<Data::Structure::Util> version 0.15 =item * L<HTML::StripScripts> version 1.05 =item * L<List::Gather> version 0.08. =back =back =head1 Obituary Diana Rosa, 27, of Rio de Janeiro, went to her long rest on May 10, 2014, along with the plush camel she kept hanging on her computer screen all the time. She was a passionate Perl hacker who loved the language and its community, and who never missed a Rio.pm event. She was a true artist, an enthusiast about writing code, singing arias and graffiting walls. We'll never forget you. Greg McCarroll died on August 28, 2013. Greg was well known for many good reasons. He was one of the organisers of the first YAPC::Europe, which concluded with an unscheduled auction where he frantically tried to raise extra money to avoid the conference making a loss. It was Greg who mistakenly arrived for a london.pm meeting a week late; some years later he was the one who sold the choice of official meeting date at a YAPC::Europe auction, and eventually as glorious leader of london.pm he got to inherit the irreverent confusion that he had created. Always helpful, friendly and cheerfully optimistic, you will be missed, but never forgotten. =head1 Acknowledgements Perl 5.20.0 represents approximately 12 months of development since Perl 5.18.0 and contains approximately 470,000 lines of changes across 2,900 files from 124 authors. Excluding auto-generated files, documentation and release tools, there were approximately 280,000 lines of changes to 1,800 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.20.0: Aaron Crane, Abhijit Menon-Sen, Abigail, Abir Viqar, Alan Haggai Alavi, Alan Hourihane, Alexander Voronov, Alexandr Ciornii, Andy Dougherty, Anno Siegel, Aristotle Pagaltzis, Arthur Axel 'fREW' Schmidt, Brad Gilbert, Brendan Byrd, Brian Childs, Brian Fraser, Brian Gottreu, Chris 'BinGOs' Williams, Christian Millour, Colin Kuskie, Craig A. Berry, Dabrien 'Dabe' Murphy, Dagfinn Ilmari Mannsåker, Daniel Dragan, Darin McBride, David Golden, David Leadbeater, David Mitchell, David Nicol, David Steinbrunner, Dennis Kaarsemaker, Dominic Hargreaves, Ed Avis, Eric Brine, Evan Zacks, Father Chrysostomos, Florian Ragwitz, François Perrad, Gavin Shelley, Gideon Israel Dsouza, Gisle Aas, Graham Knop, H.Merijn Brand, Hauke D, Heiko Eissfeldt, Hiroo Hayashi, Hojung Youn, James E Keenan, Jarkko Hietaniemi, Jerry D. Hedden, Jess Robinson, Jesse Luehrs, Johan Vromans, John Gardiner Myers, John Goodyear, John P. Linderman, John Peacock, kafka, Kang-min Liu, Karen Etheridge, Karl Williamson, Keedi Kim, Kent Fredric, kevin dawson, Kevin Falcone, Kevin Ryde, Leon Timmermans, Lukas Mai, Marc Simpson, Marcel Grünauer, Marco Peereboom, Marcus Holland-Moritz, Mark Jason Dominus, Martin McGrath, Matthew Horsfall, Max Maischein, Mike Doherty, Moritz Lenz, Nathan Glenn, Nathan Trapuzzano, Neil Bowers, Neil Williams, Nicholas Clark, Niels Thykier, Niko Tyni, Olivier Mengué, Owain G. Ainsworth, Paul Green, Paul Johnson, Peter John Acklam, Peter Martini, Peter Rabbitson, Petr Písař, Philip Boulain, Philip Guenther, Piotr Roszatycki, Rafael Garcia-Suarez, Reini Urban, Reuben Thomas, Ricardo Signes, Ruslan Zakirov, Sergey Alekseev, Shirakata Kentaro, Shlomi Fish, Slaven Rezic, Smylers, Steffen Müller, Steve Hay, Sullivan Beck, Thomas Sibley, Tobias Leich, Toby Inkster, Tokuhiro Matsuno, Tom Christiansen, Tom Hukins, Tony Cook, Victor Efimov, Viktor Turskyi, Vladimir Timofeev, YAMASHINA Hio, Yves Orton, Zefram, Zsbán Ambrus, Ævar Arnfjörð Bjarmason. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl561delta.pod 0000644 00000363451 15125556335 0007506 0 ustar 00 =head1 NAME perl561delta - what's new for perl v5.6.1 =head1 DESCRIPTION This document describes differences between the 5.005 release and the 5.6.1 release. =head1 Summary of changes between 5.6.0 and 5.6.1 This section contains a summary of the changes between the 5.6.0 release and the 5.6.1 release. More details about the changes mentioned here may be found in the F<Changes> files that accompany the Perl source distribution. See L<perlhack> for pointers to online resources where you can inspect the individual patches described by these changes. =head2 Security Issues suidperl will not run /bin/mail anymore, because some platforms have a /bin/mail that is vulnerable to buffer overflow attacks. Note that suidperl is neither built nor installed by default in any recent version of perl. Use of suidperl is highly discouraged. If you think you need it, try alternatives such as sudo first. See http://www.courtesan.com/sudo/ . =head2 Core bug fixes This is not an exhaustive list. It is intended to cover only the significant user-visible changes. =over =item C<UNIVERSAL::isa()> A bug in the caching mechanism used by C<UNIVERSAL::isa()> that affected base.pm has been fixed. The bug has existed since the 5.005 releases, but wasn't tickled by base.pm in those releases. =item Memory leaks Various cases of memory leaks and attempts to access uninitialized memory have been cured. See L</"Known Problems"> below for further issues. =item Numeric conversions Numeric conversions did not recognize changes in the string value properly in certain circumstances. In other situations, large unsigned numbers (those above 2**31) could sometimes lose their unsignedness, causing bogus results in arithmetic operations. Integer modulus on large unsigned integers sometimes returned incorrect values. Perl 5.6.0 generated "not a number" warnings on certain conversions where previous versions didn't. These problems have all been rectified. Infinity is now recognized as a number. =item qw(a\\b) In Perl 5.6.0, qw(a\\b) produced a string with two backslashes instead of one, in a departure from the behavior in previous versions. The older behavior has been reinstated. =item caller() caller() could cause core dumps in certain situations. Carp was sometimes affected by this problem. =item Bugs in regular expressions Pattern matches on overloaded values are now handled correctly. Perl 5.6.0 parsed m/\x{ab}/ incorrectly, leading to spurious warnings. This has been corrected. The RE engine found in Perl 5.6.0 accidentally pessimised certain kinds of simple pattern matches. These are now handled better. Regular expression debug output (whether through C<use re 'debug'> or via C<-Dr>) now looks better. Multi-line matches like C<"a\nxb\n" =~ /(?!\A)x/m> were flawed. The bug has been fixed. Use of $& could trigger a core dump under some situations. This is now avoided. Match variables $1 et al., weren't being unset when a pattern match was backtracking, and the anomaly showed up inside C</...(?{ ... }).../> etc. These variables are now tracked correctly. pos() did not return the correct value within s///ge in earlier versions. This is now handled correctly. =item "slurp" mode readline() on files opened in "slurp" mode could return an extra "" at the end in certain situations. This has been corrected. =item Autovivification of symbolic references to special variables Autovivification of symbolic references of special variables described in L<perlvar> (as in C<${$num}>) was accidentally disabled. This works again now. =item Lexical warnings Lexical warnings now propagate correctly into C<eval "...">. C<use warnings qw(FATAL all)> did not work as intended. This has been corrected. Lexical warnings could leak into other scopes in some situations. This is now fixed. warnings::enabled() now reports the state of $^W correctly if the caller isn't using lexical warnings. =item Spurious warnings and errors Perl 5.6.0 could emit spurious warnings about redefinition of dl_error() when statically building extensions into perl. This has been corrected. "our" variables could result in bogus "Variable will not stay shared" warnings. This is now fixed. "our" variables of the same name declared in two sibling blocks resulted in bogus warnings about "redeclaration" of the variables. The problem has been corrected. =item glob() Compatibility of the builtin glob() with old csh-based glob has been improved with the addition of GLOB_ALPHASORT option. See C<File::Glob>. File::Glob::glob() has been renamed to File::Glob::bsd_glob() because the name clashes with the builtin glob(). The older name is still available for compatibility, but is deprecated. Spurious syntax errors generated in certain situations, when glob() caused File::Glob to be loaded for the first time, have been fixed. =item Tainting Some cases of inconsistent taint propagation (such as within hash values) have been fixed. The tainting behavior of sprintf() has been rationalized. It does not taint the result of floating point formats anymore, making the behavior consistent with that of string interpolation. =item sort() Arguments to sort() weren't being provided the right wantarray() context. The comparison block is now run in scalar context, and the arguments to be sorted are always provided list context. sort() is also fully reentrant, in the sense that the sort function can itself call sort(). This did not work reliably in previous releases. =item #line directives #line directives now work correctly when they appear at the very beginning of C<eval "...">. =item Subroutine prototypes The (\&) prototype now works properly. =item map() map() could get pathologically slow when the result list it generates is larger than the source list. The performance has been improved for common scenarios. =item Debugger Debugger exit code now reflects the script exit code. Condition C<"0"> in breakpoints is now treated correctly. The C<d> command now checks the line number. C<$.> is no longer corrupted by the debugger. All debugger output now correctly goes to the socket if RemotePort is set. =item PERL5OPT PERL5OPT can be set to more than one switch group. Previously, it used to be limited to one group of options only. =item chop() chop(@list) in list context returned the characters chopped in reverse order. This has been reversed to be in the right order. =item Unicode support Unicode support has seen a large number of incremental improvements, but continues to be highly experimental. It is not expected to be fully supported in the 5.6.x maintenance releases. substr(), join(), repeat(), reverse(), quotemeta() and string concatenation were all handling Unicode strings incorrectly in Perl 5.6.0. This has been corrected. Support for C<tr///CU> and C<tr///UC> etc., have been removed since we realized the interface is broken. For similar functionality, see L<perlfunc/pack>. The Unicode Character Database has been updated to version 3.0.1 with additions made available to the public as of August 30, 2000. The Unicode character classes \p{Blank} and \p{SpacePerl} have been added. "Blank" is like C isblank(), that is, it contains only "horizontal whitespace" (the space character is, the newline isn't), and the "SpacePerl" is the Unicode equivalent of C<\s> (\p{Space} isn't, since that includes the vertical tabulator character, whereas C<\s> doesn't.) If you are experimenting with Unicode support in perl, the development versions of Perl may have more to offer. In particular, I/O layers are now available in the development track, but not in the maintenance track, primarily to do backward compatibility issues. Unicode support is also evolving rapidly on a daily basis in the development track--the maintenance track only reflects the most conservative of these changes. =item 64-bit support Support for 64-bit platforms has been improved, but continues to be experimental. The level of support varies greatly among platforms. =item Compiler The B Compiler and its various backends have had many incremental improvements, but they continue to remain highly experimental. Use in production environments is discouraged. The perlcc tool has been rewritten so that the user interface is much more like that of a C compiler. The perlbc tools has been removed. Use C<perlcc -B> instead. =item Lvalue subroutines There have been various bugfixes to support lvalue subroutines better. However, the feature still remains experimental. =item IO::Socket IO::Socket::INET failed to open the specified port if the service name was not known. It now correctly uses the supplied port number as is. =item File::Find File::Find now chdir()s correctly when chasing symbolic links. =item xsubpp xsubpp now tolerates embedded POD sections. =item C<no Module;> C<no Module;> does not produce an error even if Module does not have an unimport() method. This parallels the behavior of C<use> vis-a-vis C<import>. =item Tests A large number of tests have been added. =back =head2 Core features untie() will now call an UNTIE() hook if it exists. See L<perltie> for details. The C<-DT> command line switch outputs copious tokenizing information. See L<perlrun>. Arrays are now always interpolated in double-quotish strings. Previously, C<"foo@bar.com"> used to be a fatal error at compile time, if an array C<@bar> was not used or declared. This transitional behavior was intended to help migrate perl4 code, and is deemed to be no longer useful. See L</"Arrays now always interpolate into double-quoted strings">. keys(), each(), pop(), push(), shift(), splice() and unshift() can all be overridden now. C<my __PACKAGE__ $obj> now does the expected thing. =head2 Configuration issues On some systems (IRIX and Solaris among them) the system malloc is demonstrably better. While the defaults haven't been changed in order to retain binary compatibility with earlier releases, you may be better off building perl with C<Configure -Uusemymalloc ...> as discussed in the F<INSTALL> file. C<Configure> has been enhanced in various ways: =over =item * Minimizes use of temporary files. =item * By default, does not link perl with libraries not used by it, such as the various dbm libraries. SunOS 4.x hints preserve behavior on that platform. =item * Support for pdp11-style memory models has been removed due to obsolescence. =item * Building outside the source tree is supported on systems that have symbolic links. This is done by running sh /path/to/source/Configure -Dmksymlinks ... make all test install in a directory other than the perl source directory. See F<INSTALL>. =item * C<Configure -S> can be run non-interactively. =back =head2 Documentation README.aix, README.solaris and README.macos have been added. README.posix-bc has been renamed to README.bs2000. These are installed as L<perlaix>, L<perlsolaris>, L<perlmacos>, and L<perlbs2000> respectively. The following pod documents are brand new: perlclib Internal replacements for standard C library functions perldebtut Perl debugging tutorial perlebcdic Considerations for running Perl on EBCDIC platforms perlnewmod Perl modules: preparing a new module for distribution perlrequick Perl regular expressions quick start perlretut Perl regular expressions tutorial perlutil utilities packaged with the Perl distribution The F<INSTALL> file has been expanded to cover various issues, such as 64-bit support. A longer list of contributors has been added to the source distribution. See the file C<AUTHORS>. Numerous other changes have been made to the included documentation and FAQs. =head2 Bundled modules The following modules have been added. =over =item B::Concise Walks Perl syntax tree, printing concise info about ops. See L<B::Concise>. =item File::Temp Returns name and handle of a temporary file safely. See L<File::Temp>. =item Pod::LaTeX Converts Pod data to formatted LaTeX. See L<Pod::LaTeX>. =item Pod::Text::Overstrike Converts POD data to formatted overstrike text. See L<Pod::Text::Overstrike>. =back The following modules have been upgraded. =over =item CGI CGI v2.752 is now included. =item CPAN CPAN v1.59_54 is now included. =item Class::Struct Various bugfixes have been added. =item DB_File DB_File v1.75 supports newer Berkeley DB versions, among other improvements. =item Devel::Peek Devel::Peek has been enhanced to support dumping of memory statistics, when perl is built with the included malloc(). =item File::Find File::Find now supports pre and post-processing of the files in order to sort() them, etc. =item Getopt::Long Getopt::Long v2.25 is included. =item IO::Poll Various bug fixes have been included. =item IPC::Open3 IPC::Open3 allows use of numeric file descriptors. =item Math::BigFloat The fmod() function supports modulus operations. Various bug fixes have also been included. =item Math::Complex Math::Complex handles inf, NaN etc., better. =item Net::Ping ping() could fail on odd number of data bytes, and when the echo service isn't running. This has been corrected. =item Opcode A memory leak has been fixed. =item Pod::Parser Version 1.13 of the Pod::Parser suite is included. =item Pod::Text Pod::Text and related modules have been upgraded to the versions in podlators suite v2.08. =item SDBM_File On dosish platforms, some keys went missing because of lack of support for files with "holes". A workaround for the problem has been added. =item Sys::Syslog Various bug fixes have been included. =item Tie::RefHash Now supports Tie::RefHash::Nestable to automagically tie hashref values. =item Tie::SubstrHash Various bug fixes have been included. =back =head2 Platform-specific improvements The following new ports are now available. =over =item NCR MP-RAS =item NonStop-UX =back Perl now builds under Amdahl UTS. Perl has also been verified to build under Amiga OS. Support for EPOC has been much improved. See README.epoc. Building perl with -Duseithreads or -Duse5005threads now works under HP-UX 10.20 (previously it only worked under 10.30 or later). You will need a thread library package installed. See README.hpux. Long doubles should now work under Linux. Mac OS Classic is now supported in the mainstream source package. See README.macos. Support for MPE/iX has been updated. See README.mpeix. Support for OS/2 has been improved. See C<os2/Changes> and README.os2. Dynamic loading on z/OS (formerly OS/390) has been improved. See README.os390. Support for VMS has seen many incremental improvements, including better support for operators like backticks and system(), and better %ENV handling. See C<README.vms> and L<perlvms>. Support for Stratus VOS has been improved. See C<vos/Changes> and README.vos. Support for Windows has been improved. =over =item * fork() emulation has been improved in various ways, but still continues to be experimental. See L<perlfork> for known bugs and caveats. =item * %SIG has been enabled under USE_ITHREADS, but its use is completely unsupported under all configurations. =item * Borland C++ v5.5 is now a supported compiler that can build Perl. However, the generated binaries continue to be incompatible with those generated by the other supported compilers (GCC and Visual C++). =item * Non-blocking waits for child processes (or pseudo-processes) are supported via C<waitpid($pid, &POSIX::WNOHANG)>. =item * A memory leak in accept() has been fixed. =item * wait(), waitpid() and backticks now return the correct exit status under Windows 9x. =item * Trailing new %ENV entries weren't propagated to child processes. This is now fixed. =item * Current directory entries in %ENV are now correctly propagated to child processes. =item * Duping socket handles with open(F, ">&MYSOCK") now works under Windows 9x. =item * The makefiles now provide a single switch to bulk-enable all the features enabled in ActiveState ActivePerl (a popular binary distribution). =item * Win32::GetCwd() correctly returns C:\ instead of C: when at the drive root. Other bugs in chdir() and Cwd::cwd() have also been fixed. =item * fork() correctly returns undef and sets EAGAIN when it runs out of pseudo-process handles. =item * ExtUtils::MakeMaker now uses $ENV{LIB} to search for libraries. =item * UNC path handling is better when perl is built to support fork(). =item * A handle leak in socket handling has been fixed. =item * send() works from within a pseudo-process. =back Unless specifically qualified otherwise, the remainder of this document covers changes between the 5.005 and 5.6.0 releases. =head1 Core Enhancements =head2 Interpreter cloning, threads, and concurrency Perl 5.6.0 introduces the beginnings of support for running multiple interpreters concurrently in different threads. In conjunction with the perl_clone() API call, which can be used to selectively duplicate the state of any given interpreter, it is possible to compile a piece of code once in an interpreter, clone that interpreter one or more times, and run all the resulting interpreters in distinct threads. On the Windows platform, this feature is used to emulate fork() at the interpreter level. See L<perlfork> for details about that. This feature is still in evolution. It is eventually meant to be used to selectively clone a subroutine and data reachable from that subroutine in a separate interpreter and run the cloned subroutine in a separate thread. Since there is no shared data between the interpreters, little or no locking will be needed (unless parts of the symbol table are explicitly shared). This is obviously intended to be an easy-to-use replacement for the existing threads support. Support for cloning interpreters and interpreter concurrency can be enabled using the -Dusethreads Configure option (see win32/Makefile for how to enable it on Windows.) The resulting perl executable will be functionally identical to one that was built with -Dmultiplicity, but the perl_clone() API call will only be available in the former. -Dusethreads enables the cpp macro USE_ITHREADS by default, which in turn enables Perl source code changes that provide a clear separation between the op tree and the data it operates with. The former is immutable, and can therefore be shared between an interpreter and all of its clones, while the latter is considered local to each interpreter, and is therefore copied for each clone. Note that building Perl with the -Dusemultiplicity Configure option is adequate if you wish to run multiple B<independent> interpreters concurrently in different threads. -Dusethreads only provides the additional functionality of the perl_clone() API call and other support for running B<cloned> interpreters concurrently. NOTE: This is an experimental feature. Implementation details are subject to change. =head2 Lexically scoped warning categories You can now control the granularity of warnings emitted by perl at a finer level using the C<use warnings> pragma. L<warnings> and L<perllexwarn> have copious documentation on this feature. =head2 Unicode and UTF-8 support Perl now uses UTF-8 as its internal representation for character strings. The C<utf8> and C<bytes> pragmas are used to control this support in the current lexical scope. See L<perlunicode>, L<utf8> and L<bytes> for more information. This feature is expected to evolve quickly to support some form of I/O disciplines that can be used to specify the kind of input and output data (bytes or characters). Until that happens, additional modules from CPAN will be needed to complete the toolkit for dealing with Unicode. NOTE: This should be considered an experimental feature. Implementation details are subject to change. =head2 Support for interpolating named characters The new C<\N> escape interpolates named characters within strings. For example, C<"Hi! \N{WHITE SMILING FACE}"> evaluates to a string with a Unicode smiley face at the end. =head2 "our" declarations An "our" declaration introduces a value that can be best understood as a lexically scoped symbolic alias to a global variable in the package that was current where the variable was declared. This is mostly useful as an alternative to the C<vars> pragma, but also provides the opportunity to introduce typing and other attributes for such variables. See L<perlfunc/our>. =head2 Support for strings represented as a vector of ordinals Literals of the form C<v1.2.3.4> are now parsed as a string composed of characters with the specified ordinals. This is an alternative, more readable way to construct (possibly Unicode) strings instead of interpolating characters, as in C<"\x{1}\x{2}\x{3}\x{4}">. The leading C<v> may be omitted if there are more than two ordinals, so C<1.2.3> is parsed the same as C<v1.2.3>. Strings written in this form are also useful to represent version "numbers". It is easy to compare such version "numbers" (which are really just plain strings) using any of the usual string comparison operators C<eq>, C<ne>, C<lt>, C<gt>, etc., or perform bitwise string operations on them using C<|>, C<&>, etc. In conjunction with the new C<$^V> magic variable (which contains the perl version as a string), such literals can be used as a readable way to check if you're running a particular version of Perl: # this will parse in older versions of Perl also if ($^V and $^V gt v5.6.0) { # new features supported } C<require> and C<use> also have some special magic to support such literals. They will be interpreted as a version rather than as a module name: require v5.6.0; # croak if $^V lt v5.6.0 use v5.6.0; # same, but croaks at compile-time Alternatively, the C<v> may be omitted if there is more than one dot: require 5.6.0; use 5.6.0; Also, C<sprintf> and C<printf> support the Perl-specific format flag C<%v> to print ordinals of characters in arbitrary strings: printf "v%vd", $^V; # prints current version, such as "v5.5.650" printf "%*vX", ":", $addr; # formats IPv6 address printf "%*vb", " ", $bits; # displays bitstring See L<perldata/"Scalar value constructors"> for additional information. =head2 Improved Perl version numbering system Beginning with Perl version 5.6.0, the version number convention has been changed to a "dotted integer" scheme that is more commonly found in open source projects. Maintenance versions of v5.6.0 will be released as v5.6.1, v5.6.2 etc. The next development series following v5.6.0 will be numbered v5.7.x, beginning with v5.7.0, and the next major production release following v5.6.0 will be v5.8.0. The English module now sets $PERL_VERSION to $^V (a string value) rather than C<$]> (a numeric value). (This is a potential incompatibility. Send us a report via perlbug if you are affected by this.) The v1.2.3 syntax is also now legal in Perl. See L</Support for strings represented as a vector of ordinals> for more on that. To cope with the new versioning system's use of at least three significant digits for each version component, the method used for incrementing the subversion number has also changed slightly. We assume that versions older than v5.6.0 have been incrementing the subversion component in multiples of 10. Versions after v5.6.0 will increment them by 1. Thus, using the new notation, 5.005_03 is the "same" as v5.5.30, and the first maintenance version following v5.6.0 will be v5.6.1 (which should be read as being equivalent to a floating point value of 5.006_001 in the older format, stored in C<$]>). =head2 New syntax for declaring subroutine attributes Formerly, if you wanted to mark a subroutine as being a method call or as requiring an automatic lock() when it is entered, you had to declare that with a C<use attrs> pragma in the body of the subroutine. That can now be accomplished with declaration syntax, like this: sub mymethod : locked method; ... sub mymethod : locked method { ... } sub othermethod :locked :method; ... sub othermethod :locked :method { ... } (Note how only the first C<:> is mandatory, and whitespace surrounding the C<:> is optional.) F<AutoSplit.pm> and F<SelfLoader.pm> have been updated to keep the attributes with the stubs they provide. See L<attributes>. =head2 File and directory handles can be autovivified Similar to how constructs such as C<< $x->[0] >> autovivify a reference, handle constructors (open(), opendir(), pipe(), socketpair(), sysopen(), socket(), and accept()) now autovivify a file or directory handle if the handle passed to them is an uninitialized scalar variable. This allows the constructs such as C<open(my $fh, ...)> and C<open(local $fh,...)> to be used to create filehandles that will conveniently be closed automatically when the scope ends, provided there are no other references to them. This largely eliminates the need for typeglobs when opening filehandles that must be passed around, as in the following example: sub myopen { open my $fh, "@_" or die "Can't open '@_': $!"; return $fh; } { my $f = myopen("</etc/motd"); print <$f>; # $f implicitly closed here } =head2 open() with more than two arguments If open() is passed three arguments instead of two, the second argument is used as the mode and the third argument is taken to be the file name. This is primarily useful for protecting against unintended magic behavior of the traditional two-argument form. See L<perlfunc/open>. =head2 64-bit support Any platform that has 64-bit integers either (1) natively as longs or ints (2) via special compiler flags (3) using long long or int64_t is able to use "quads" (64-bit integers) as follows: =over 4 =item * constants (decimal, hexadecimal, octal, binary) in the code =item * arguments to oct() and hex() =item * arguments to print(), printf() and sprintf() (flag prefixes ll, L, q) =item * printed as such =item * pack() and unpack() "q" and "Q" formats =item * in basic arithmetics: + - * / % (NOTE: operating close to the limits of the integer values may produce surprising results) =item * in bit arithmetics: & | ^ ~ << >> (NOTE: these used to be forced to be 32 bits wide but now operate on the full native width.) =item * vec() =back Note that unless you have the case (a) you will have to configure and compile Perl using the -Duse64bitint Configure flag. NOTE: The Configure flags -Duselonglong and -Duse64bits have been deprecated. Use -Duse64bitint instead. There are actually two modes of 64-bitness: the first one is achieved using Configure -Duse64bitint and the second one using Configure -Duse64bitall. The difference is that the first one is minimal and the second one maximal. The first works in more places than the second. The C<use64bitint> does only as much as is required to get 64-bit integers into Perl (this may mean, for example, using "long longs") while your memory may still be limited to 2 gigabytes (because your pointers could still be 32-bit). Note that the name C<64bitint> does not imply that your C compiler will be using 64-bit C<int>s (it might, but it doesn't have to): the C<use64bitint> means that you will be able to have 64 bits wide scalar values. The C<use64bitall> goes all the way by attempting to switch also integers (if it can), longs (and pointers) to being 64-bit. This may create an even more binary incompatible Perl than -Duse64bitint: the resulting executable may not run at all in a 32-bit box, or you may have to reboot/reconfigure/rebuild your operating system to be 64-bit aware. Natively 64-bit systems like Alpha and Cray need neither -Duse64bitint nor -Duse64bitall. Last but not least: note that due to Perl's habit of always using floating point numbers, the quads are still not true integers. When quads overflow their limits (0...18_446_744_073_709_551_615 unsigned, -9_223_372_036_854_775_808...9_223_372_036_854_775_807 signed), they are silently promoted to floating point numbers, after which they will start losing precision (in their lower digits). NOTE: 64-bit support is still experimental on most platforms. Existing support only covers the LP64 data model. In particular, the LLP64 data model is not yet supported. 64-bit libraries and system APIs on many platforms have not stabilized--your mileage may vary. =head2 Large file support If you have filesystems that support "large files" (files larger than 2 gigabytes), you may now also be able to create and access them from Perl. NOTE: The default action is to enable large file support, if available on the platform. If the large file support is on, and you have a Fcntl constant O_LARGEFILE, the O_LARGEFILE is automatically added to the flags of sysopen(). Beware that unless your filesystem also supports "sparse files" seeking to umpteen petabytes may be inadvisable. Note that in addition to requiring a proper file system to do large files you may also need to adjust your per-process (or your per-system, or per-process-group, or per-user-group) maximum filesize limits before running Perl scripts that try to handle large files, especially if you intend to write such files. Finally, in addition to your process/process group maximum filesize limits, you may have quota limits on your filesystems that stop you (your user id or your user group id) from using large files. Adjusting your process/user/group/file system/operating system limits is outside the scope of Perl core language. For process limits, you may try increasing the limits using your shell's limits/limit/ulimit command before running Perl. The BSD::Resource extension (not included with the standard Perl distribution) may also be of use, it offers the getrlimit/setrlimit interface that can be used to adjust process resource usage limits, including the maximum filesize limit. =head2 Long doubles In some systems you may be able to use long doubles to enhance the range and precision of your double precision floating point numbers (that is, Perl's numbers). Use Configure -Duselongdouble to enable this support (if it is available). =head2 "more bits" You can "Configure -Dusemorebits" to turn on both the 64-bit support and the long double support. =head2 Enhanced support for sort() subroutines Perl subroutines with a prototype of C<($$)>, and XSUBs in general, can now be used as sort subroutines. In either case, the two elements to be compared are passed as normal parameters in @_. See L<perlfunc/sort>. For unprototyped sort subroutines, the historical behavior of passing the elements to be compared as the global variables $a and $b remains unchanged. =head2 C<sort $coderef @foo> allowed sort() did not accept a subroutine reference as the comparison function in earlier versions. This is now permitted. =head2 File globbing implemented internally Perl now uses the File::Glob implementation of the glob() operator automatically. This avoids using an external csh process and the problems associated with it. NOTE: This is currently an experimental feature. Interfaces and implementation are subject to change. =head2 Support for CHECK blocks In addition to C<BEGIN>, C<INIT>, C<END>, C<DESTROY> and C<AUTOLOAD>, subroutines named C<CHECK> are now special. These are queued up during compilation and behave similar to END blocks, except they are called at the end of compilation rather than at the end of execution. They cannot be called directly. =head2 POSIX character class syntax [: :] supported For example to match alphabetic characters use /[[:alpha:]]/. See L<perlre> for details. =head2 Better pseudo-random number generator In 5.005_0x and earlier, perl's rand() function used the C library rand(3) function. As of 5.005_52, Configure tests for drand48(), random(), and rand() (in that order) and picks the first one it finds. These changes should result in better random numbers from rand(). =head2 Improved C<qw//> operator The C<qw//> operator is now evaluated at compile time into a true list instead of being replaced with a run time call to C<split()>. This removes the confusing misbehaviour of C<qw//> in scalar context, which had inherited that behaviour from split(). Thus: $foo = ($bar) = qw(a b c); print "$foo|$bar\n"; now correctly prints "3|a", instead of "2|a". =head2 Better worst-case behavior of hashes Small changes in the hashing algorithm have been implemented in order to improve the distribution of lower order bits in the hashed value. This is expected to yield better performance on keys that are repeated sequences. =head2 pack() format 'Z' supported The new format type 'Z' is useful for packing and unpacking null-terminated strings. See L<perlfunc/"pack">. =head2 pack() format modifier '!' supported The new format type modifier '!' is useful for packing and unpacking native shorts, ints, and longs. See L<perlfunc/"pack">. =head2 pack() and unpack() support counted strings The template character '/' can be used to specify a counted string type to be packed or unpacked. See L<perlfunc/"pack">. =head2 Comments in pack() templates The '#' character in a template introduces a comment up to end of the line. This facilitates documentation of pack() templates. =head2 Weak references In previous versions of Perl, you couldn't cache objects so as to allow them to be deleted if the last reference from outside the cache is deleted. The reference in the cache would hold a reference count on the object and the objects would never be destroyed. Another familiar problem is with circular references. When an object references itself, its reference count would never go down to zero, and it would not get destroyed until the program is about to exit. Weak references solve this by allowing you to "weaken" any reference, that is, make it not count towards the reference count. When the last non-weak reference to an object is deleted, the object is destroyed and all the weak references to the object are automatically undef-ed. To use this feature, you need the Devel::WeakRef package from CPAN, which contains additional documentation. NOTE: This is an experimental feature. Details are subject to change. =head2 Binary numbers supported Binary numbers are now supported as literals, in s?printf formats, and C<oct()>: $answer = 0b101010; printf "The answer is: %b\n", oct("0b101010"); =head2 Lvalue subroutines Subroutines can now return modifiable lvalues. See L<perlsub/"Lvalue subroutines">. NOTE: This is an experimental feature. Details are subject to change. =head2 Some arrows may be omitted in calls through references Perl now allows the arrow to be omitted in many constructs involving subroutine calls through references. For example, C<< $foo[10]->('foo') >> may now be written C<$foo[10]('foo')>. This is rather similar to how the arrow may be omitted from C<< $foo[10]->{'foo'} >>. Note however, that the arrow is still required for C<< foo(10)->('bar') >>. =head2 Boolean assignment operators are legal lvalues Constructs such as C<($a ||= 2) += 1> are now allowed. =head2 exists() is supported on subroutine names The exists() builtin now works on subroutine names. A subroutine is considered to exist if it has been declared (even if implicitly). See L<perlfunc/exists> for examples. =head2 exists() and delete() are supported on array elements The exists() and delete() builtins now work on simple arrays as well. The behavior is similar to that on hash elements. exists() can be used to check whether an array element has been initialized. This avoids autovivifying array elements that don't exist. If the array is tied, the EXISTS() method in the corresponding tied package will be invoked. delete() may be used to remove an element from the array and return it. The array element at that position returns to its uninitialized state, so that testing for the same element with exists() will return false. If the element happens to be the one at the end, the size of the array also shrinks up to the highest element that tests true for exists(), or 0 if none such is found. If the array is tied, the DELETE() method in the corresponding tied package will be invoked. See L<perlfunc/exists> and L<perlfunc/delete> for examples. =head2 Pseudo-hashes work better Dereferencing some types of reference values in a pseudo-hash, such as C<< $ph->{foo}[1] >>, was accidentally disallowed. This has been corrected. When applied to a pseudo-hash element, exists() now reports whether the specified value exists, not merely if the key is valid. delete() now works on pseudo-hashes. When given a pseudo-hash element or slice it deletes the values corresponding to the keys (but not the keys themselves). See L<perlref/"Pseudo-hashes: Using an array as a hash">. Pseudo-hash slices with constant keys are now optimized to array lookups at compile-time. List assignments to pseudo-hash slices are now supported. The C<fields> pragma now provides ways to create pseudo-hashes, via fields::new() and fields::phash(). See L<fields>. NOTE: The pseudo-hash data type continues to be experimental. Limiting oneself to the interface elements provided by the fields pragma will provide protection from any future changes. =head2 Automatic flushing of output buffers fork(), exec(), system(), qx//, and pipe open()s now flush buffers of all files opened for output when the operation was attempted. This mostly eliminates confusing buffering mishaps suffered by users unaware of how Perl internally handles I/O. This is not supported on some platforms like Solaris where a suitably correct implementation of fflush(NULL) isn't available. =head2 Better diagnostics on meaningless filehandle operations Constructs such as C<< open(<FH>) >> and C<< close(<FH>) >> are compile time errors. Attempting to read from filehandles that were opened only for writing will now produce warnings (just as writing to read-only filehandles does). =head2 Where possible, buffered data discarded from duped input filehandle C<< open(NEW, "<&OLD") >> now attempts to discard any data that was previously read and buffered in C<OLD> before duping the handle. On platforms where doing this is allowed, the next read operation on C<NEW> will return the same data as the corresponding operation on C<OLD>. Formerly, it would have returned the data from the start of the following disk block instead. =head2 eof() has the same old magic as <> C<eof()> would return true if no attempt to read from C<< <> >> had yet been made. C<eof()> has been changed to have a little magic of its own, it now opens the C<< <> >> files. =head2 binmode() can be used to set :crlf and :raw modes binmode() now accepts a second argument that specifies a discipline for the handle in question. The two pseudo-disciplines ":raw" and ":crlf" are currently supported on DOS-derivative platforms. See L<perlfunc/"binmode"> and L<open>. =head2 C<-T> filetest recognizes UTF-8 encoded files as "text" The algorithm used for the C<-T> filetest has been enhanced to correctly identify UTF-8 content as "text". =head2 system(), backticks and pipe open now reflect exec() failure On Unix and similar platforms, system(), qx() and open(FOO, "cmd |") etc., are implemented via fork() and exec(). When the underlying exec() fails, earlier versions did not report the error properly, since the exec() happened to be in a different process. The child process now communicates with the parent about the error in launching the external command, which allows these constructs to return with their usual error value and set $!. =head2 Improved diagnostics Line numbers are no longer suppressed (under most likely circumstances) during the global destruction phase. Diagnostics emitted from code running in threads other than the main thread are now accompanied by the thread ID. Embedded null characters in diagnostics now actually show up. They used to truncate the message in prior versions. $foo::a and $foo::b are now exempt from "possible typo" warnings only if sort() is encountered in package C<foo>. Unrecognized alphabetic escapes encountered when parsing quote constructs now generate a warning, since they may take on new semantics in later versions of Perl. Many diagnostics now report the internal operation in which the warning was provoked, like so: Use of uninitialized value in concatenation (.) at (eval 1) line 1. Use of uninitialized value in print at (eval 1) line 1. Diagnostics that occur within eval may also report the file and line number where the eval is located, in addition to the eval sequence number and the line number within the evaluated text itself. For example: Not enough arguments for scalar at (eval 4)[newlib/perl5db.pl:1411] line 2, at EOF =head2 Diagnostics follow STDERR Diagnostic output now goes to whichever file the C<STDERR> handle is pointing at, instead of always going to the underlying C runtime library's C<stderr>. =head2 More consistent close-on-exec behavior On systems that support a close-on-exec flag on filehandles, the flag is now set for any handles created by pipe(), socketpair(), socket(), and accept(), if that is warranted by the value of $^F that may be in effect. Earlier versions neglected to set the flag for handles created with these operators. See L<perlfunc/pipe>, L<perlfunc/socketpair>, L<perlfunc/socket>, L<perlfunc/accept>, and L<perlvar/$^F>. =head2 syswrite() ease-of-use The length argument of C<syswrite()> has become optional. =head2 Better syntax checks on parenthesized unary operators Expressions such as: print defined(&foo,&bar,&baz); print uc("foo","bar","baz"); undef($foo,&bar); used to be accidentally allowed in earlier versions, and produced unpredictable behaviour. Some produced ancillary warnings when used in this way; others silently did the wrong thing. The parenthesized forms of most unary operators that expect a single argument now ensure that they are not called with more than one argument, making the cases shown above syntax errors. The usual behaviour of: print defined &foo, &bar, &baz; print uc "foo", "bar", "baz"; undef $foo, &bar; remains unchanged. See L<perlop>. =head2 Bit operators support full native integer width The bit operators (& | ^ ~ << >>) now operate on the full native integral width (the exact size of which is available in $Config{ivsize}). For example, if your platform is either natively 64-bit or if Perl has been configured to use 64-bit integers, these operations apply to 8 bytes (as opposed to 4 bytes on 32-bit platforms). For portability, be sure to mask off the excess bits in the result of unary C<~>, e.g., C<~$x & 0xffffffff>. =head2 Improved security features More potentially unsafe operations taint their results for improved security. The C<passwd> and C<shell> fields returned by the getpwent(), getpwnam(), and getpwuid() are now tainted, because the user can affect their own encrypted password and login shell. The variable modified by shmread(), and messages returned by msgrcv() (and its object-oriented interface IPC::SysV::Msg::rcv) are also tainted, because other untrusted processes can modify messages and shared memory segments for their own nefarious purposes. =head2 More functional bareword prototype (*) Bareword prototypes have been rationalized to enable them to be used to override builtins that accept barewords and interpret them in a special way, such as C<require> or C<do>. Arguments prototyped as C<*> will now be visible within the subroutine as either a simple scalar or as a reference to a typeglob. See L<perlsub/Prototypes>. =head2 C<require> and C<do> may be overridden C<require> and C<do 'file'> operations may be overridden locally by importing subroutines of the same name into the current package (or globally by importing them into the CORE::GLOBAL:: namespace). Overriding C<require> will also affect C<use>, provided the override is visible at compile-time. See L<perlsub/"Overriding Built-in Functions">. =head2 $^X variables may now have names longer than one character Formerly, $^X was synonymous with ${"\cX"}, but $^XY was a syntax error. Now variable names that begin with a control character may be arbitrarily long. However, for compatibility reasons, these variables I<must> be written with explicit braces, as C<${^XY}> for example. C<${^XYZ}> is synonymous with ${"\cXYZ"}. Variable names with more than one control character, such as C<${^XY^Z}>, are illegal. The old syntax has not changed. As before, `^X' may be either a literal control-X character or the two-character sequence `caret' plus `X'. When braces are omitted, the variable name stops after the control character. Thus C<"$^XYZ"> continues to be synonymous with C<$^X . "YZ"> as before. As before, lexical variables may not have names beginning with control characters. As before, variables whose names begin with a control character are always forced to be in package `main'. All such variables are reserved for future extensions, except those that begin with C<^_>, which may be used by user programs and are guaranteed not to acquire special meaning in any future version of Perl. =head2 New variable $^C reflects C<-c> switch C<$^C> has a boolean value that reflects whether perl is being run in compile-only mode (i.e. via the C<-c> switch). Since BEGIN blocks are executed under such conditions, this variable enables perl code to determine whether actions that make sense only during normal running are warranted. See L<perlvar>. =head2 New variable $^V contains Perl version as a string C<$^V> contains the Perl version number as a string composed of characters whose ordinals match the version numbers, i.e. v5.6.0. This may be used in string comparisons. See C<Support for strings represented as a vector of ordinals> for an example. =head2 Optional Y2K warnings If Perl is built with the cpp macro C<PERL_Y2KWARN> defined, it emits optional warnings when concatenating the number 19 with another number. This behavior must be specifically enabled when running Configure. See F<INSTALL> and F<README.Y2K>. =head2 Arrays now always interpolate into double-quoted strings In double-quoted strings, arrays now interpolate, no matter what. The behavior in earlier versions of perl 5 was that arrays would interpolate into strings if the array had been mentioned before the string was compiled, and otherwise Perl would raise a fatal compile-time error. In versions 5.000 through 5.003, the error was Literal @example now requires backslash In versions 5.004_01 through 5.6.0, the error was In string, @example now must be written as \@example The idea here was to get people into the habit of writing C<"fred\@example.com"> when they wanted a literal C<@> sign, just as they have always written C<"Give me back my \$5"> when they wanted a literal C<$> sign. Starting with 5.6.1, when Perl now sees an C<@> sign in a double-quoted string, it I<always> attempts to interpolate an array, regardless of whether or not the array has been used or declared already. The fatal error has been downgraded to an optional warning: Possible unintended interpolation of @example in string This warns you that C<"fred@example.com"> is going to turn into C<fred.com> if you don't backslash the C<@>. See http://perl.plover.com/at-error.html for more details about the history here. =head2 @- and @+ provide starting/ending offsets of regex submatches The new magic variables @- and @+ provide the starting and ending offsets, respectively, of $&, $1, $2, etc. See L<perlvar> for details. =head1 Modules and Pragmata =head2 Modules =over 4 =item attributes While used internally by Perl as a pragma, this module also provides a way to fetch subroutine and variable attributes. See L<attributes>. =item B The Perl Compiler suite has been extensively reworked for this release. More of the standard Perl test suite passes when run under the Compiler, but there is still a significant way to go to achieve production quality compiled executables. NOTE: The Compiler suite remains highly experimental. The generated code may not be correct, even when it manages to execute without errors. =item Benchmark Overall, Benchmark results exhibit lower average error and better timing accuracy. You can now run tests for I<n> seconds instead of guessing the right number of tests to run: e.g., timethese(-5, ...) will run each code for at least 5 CPU seconds. Zero as the "number of repetitions" means "for at least 3 CPU seconds". The output format has also changed. For example: use Benchmark;$x=3;timethese(-5,{a=>sub{$x*$x},b=>sub{$x**2}}) will now output something like this: Benchmark: running a, b, each for at least 5 CPU seconds... a: 5 wallclock secs ( 5.77 usr + 0.00 sys = 5.77 CPU) @ 200551.91/s (n=1156516) b: 4 wallclock secs ( 5.00 usr + 0.02 sys = 5.02 CPU) @ 159605.18/s (n=800686) New features: "each for at least N CPU seconds...", "wallclock secs", and the "@ operations/CPU second (n=operations)". timethese() now returns a reference to a hash of Benchmark objects containing the test results, keyed on the names of the tests. timethis() now returns the iterations field in the Benchmark result object instead of 0. timethese(), timethis(), and the new cmpthese() (see below) can also take a format specifier of 'none' to suppress output. A new function countit() is just like timeit() except that it takes a TIME instead of a COUNT. A new function cmpthese() prints a chart comparing the results of each test returned from a timethese() call. For each possible pair of tests, the percentage speed difference (iters/sec or seconds/iter) is shown. For other details, see L<Benchmark>. =item ByteLoader The ByteLoader is a dedicated extension to generate and run Perl bytecode. See L<ByteLoader>. =item constant References can now be used. The new version also allows a leading underscore in constant names, but disallows a double leading underscore (as in "__LINE__"). Some other names are disallowed or warned against, including BEGIN, END, etc. Some names which were forced into main:: used to fail silently in some cases; now they're fatal (outside of main::) and an optional warning (inside of main::). The ability to detect whether a constant had been set with a given name has been added. See L<constant>. =item charnames This pragma implements the C<\N> string escape. See L<charnames>. =item Data::Dumper A C<Maxdepth> setting can be specified to avoid venturing too deeply into deep data structures. See L<Data::Dumper>. The XSUB implementation of Dump() is now automatically called if the C<Useqq> setting is not in use. Dumping C<qr//> objects works correctly. =item DB C<DB> is an experimental module that exposes a clean abstraction to Perl's debugging API. =item DB_File DB_File can now be built with Berkeley DB versions 1, 2 or 3. See C<ext/DB_File/Changes>. =item Devel::DProf Devel::DProf, a Perl source code profiler has been added. See L<Devel::DProf> and L<dprofpp>. =item Devel::Peek The Devel::Peek module provides access to the internal representation of Perl variables and data. It is a data debugging tool for the XS programmer. =item Dumpvalue The Dumpvalue module provides screen dumps of Perl data. =item DynaLoader DynaLoader now supports a dl_unload_file() function on platforms that support unloading shared objects using dlclose(). Perl can also optionally arrange to unload all extension shared objects loaded by Perl. To enable this, build Perl with the Configure option C<-Accflags=-DDL_UNLOAD_ALL_AT_EXIT>. (This maybe useful if you are using Apache with mod_perl.) =item English $PERL_VERSION now stands for C<$^V> (a string value) rather than for C<$]> (a numeric value). =item Env Env now supports accessing environment variables like PATH as array variables. =item Fcntl More Fcntl constants added: F_SETLK64, F_SETLKW64, O_LARGEFILE for large file (more than 4GB) access (NOTE: the O_LARGEFILE is automatically added to sysopen() flags if large file support has been configured, as is the default), Free/Net/OpenBSD locking behaviour flags F_FLOCK, F_POSIX, Linux F_SHLCK, and O_ACCMODE: the combined mask of O_RDONLY, O_WRONLY, and O_RDWR. The seek()/sysseek() constants SEEK_SET, SEEK_CUR, and SEEK_END are available via the C<:seek> tag. The chmod()/stat() S_IF* constants and S_IS* functions are available via the C<:mode> tag. =item File::Compare A compare_text() function has been added, which allows custom comparison functions. See L<File::Compare>. =item File::Find File::Find now works correctly when the wanted() function is either autoloaded or is a symbolic reference. A bug that caused File::Find to lose track of the working directory when pruning top-level directories has been fixed. File::Find now also supports several other options to control its behavior. It can follow symbolic links if the C<follow> option is specified. Enabling the C<no_chdir> option will make File::Find skip changing the current directory when walking directories. The C<untaint> flag can be useful when running with taint checks enabled. See L<File::Find>. =item File::Glob This extension implements BSD-style file globbing. By default, it will also be used for the internal implementation of the glob() operator. See L<File::Glob>. =item File::Spec New methods have been added to the File::Spec module: devnull() returns the name of the null device (/dev/null on Unix) and tmpdir() the name of the temp directory (normally /tmp on Unix). There are now also methods to convert between absolute and relative filenames: abs2rel() and rel2abs(). For compatibility with operating systems that specify volume names in file paths, the splitpath(), splitdir(), and catdir() methods have been added. =item File::Spec::Functions The new File::Spec::Functions modules provides a function interface to the File::Spec module. Allows shorthand $fullname = catfile($dir1, $dir2, $file); instead of $fullname = File::Spec->catfile($dir1, $dir2, $file); =item Getopt::Long Getopt::Long licensing has changed to allow the Perl Artistic License as well as the GPL. It used to be GPL only, which got in the way of non-GPL applications that wanted to use Getopt::Long. Getopt::Long encourages the use of Pod::Usage to produce help messages. For example: use Getopt::Long; use Pod::Usage; my $man = 0; my $help = 0; GetOptions('help|?' => \$help, man => \$man) or pod2usage(2); pod2usage(1) if $help; pod2usage(-exitstatus => 0, -verbose => 2) if $man; __END__ =head1 NAME sample - Using Getopt::Long and Pod::Usage =head1 SYNOPSIS sample [options] [file ...] Options: -help brief help message -man full documentation =head1 OPTIONS =over 8 =item B<-help> Print a brief help message and exits. =item B<-man> Prints the manual page and exits. =back =head1 DESCRIPTION B<This program> will read the given input file(s) and do something useful with the contents thereof. =cut See L<Pod::Usage> for details. A bug that prevented the non-option call-back <> from being specified as the first argument has been fixed. To specify the characters < and > as option starters, use ><. Note, however, that changing option starters is strongly deprecated. =item IO write() and syswrite() will now accept a single-argument form of the call, for consistency with Perl's syswrite(). You can now create a TCP-based IO::Socket::INET without forcing a connect attempt. This allows you to configure its options (like making it non-blocking) and then call connect() manually. A bug that prevented the IO::Socket::protocol() accessor from ever returning the correct value has been corrected. IO::Socket::connect now uses non-blocking IO instead of alarm() to do connect timeouts. IO::Socket::accept now uses select() instead of alarm() for doing timeouts. IO::Socket::INET->new now sets $! correctly on failure. $@ is still set for backwards compatibility. =item JPL Java Perl Lingo is now distributed with Perl. See jpl/README for more information. =item lib C<use lib> now weeds out any trailing duplicate entries. C<no lib> removes all named entries. =item Math::BigInt The bitwise operations C<<< << >>>, C<<< >> >>>, C<&>, C<|>, and C<~> are now supported on bigints. =item Math::Complex The accessor methods Re, Im, arg, abs, rho, and theta can now also act as mutators (accessor $z->Re(), mutator $z->Re(3)). The class method C<display_format> and the corresponding object method C<display_format>, in addition to accepting just one argument, now can also accept a parameter hash. Recognized keys of a parameter hash are C<"style">, which corresponds to the old one parameter case, and two new parameters: C<"format">, which is a printf()-style format string (defaults usually to C<"%.15g">, you can revert to the default by setting the format string to C<undef>) used for both parts of a complex number, and C<"polar_pretty_print"> (defaults to true), which controls whether an attempt is made to try to recognize small multiples and rationals of pi (2pi, pi/2) at the argument (angle) of a polar complex number. The potentially disruptive change is that in list context both methods now I<return the parameter hash>, instead of only the value of the C<"style"> parameter. =item Math::Trig A little bit of radial trigonometry (cylindrical and spherical), radial coordinate conversions, and the great circle distance were added. =item Pod::Parser, Pod::InputObjects Pod::Parser is a base class for parsing and selecting sections of pod documentation from an input stream. This module takes care of identifying pod paragraphs and commands in the input and hands off the parsed paragraphs and commands to user-defined methods which are free to interpret or translate them as they see fit. Pod::InputObjects defines some input objects needed by Pod::Parser, and for advanced users of Pod::Parser that need more about a command besides its name and text. As of release 5.6.0 of Perl, Pod::Parser is now the officially sanctioned "base parser code" recommended for use by all pod2xxx translators. Pod::Text (pod2text) and Pod::Man (pod2man) have already been converted to use Pod::Parser and efforts to convert Pod::HTML (pod2html) are already underway. For any questions or comments about pod parsing and translating issues and utilities, please use the pod-people@perl.org mailing list. For further information, please see L<Pod::Parser> and L<Pod::InputObjects>. =item Pod::Checker, podchecker This utility checks pod files for correct syntax, according to L<perlpod>. Obvious errors are flagged as such, while warnings are printed for mistakes that can be handled gracefully. The checklist is not complete yet. See L<Pod::Checker>. =item Pod::ParseUtils, Pod::Find These modules provide a set of gizmos that are useful mainly for pod translators. L<Pod::Find|Pod::Find> traverses directory structures and returns found pod files, along with their canonical names (like C<File::Spec::Unix>). L<Pod::ParseUtils|Pod::ParseUtils> contains B<Pod::List> (useful for storing pod list information), B<Pod::Hyperlink> (for parsing the contents of C<LE<lt>E<gt>> sequences) and B<Pod::Cache> (for caching information about pod files, e.g., link nodes). =item Pod::Select, podselect Pod::Select is a subclass of Pod::Parser which provides a function named "podselect()" to filter out user-specified sections of raw pod documentation from an input stream. podselect is a script that provides access to Pod::Select from other scripts to be used as a filter. See L<Pod::Select>. =item Pod::Usage, pod2usage Pod::Usage provides the function "pod2usage()" to print usage messages for a Perl script based on its embedded pod documentation. The pod2usage() function is generally useful to all script authors since it lets them write and maintain a single source (the pods) for documentation, thus removing the need to create and maintain redundant usage message text consisting of information already in the pods. There is also a pod2usage script which can be used from other kinds of scripts to print usage messages from pods (even for non-Perl scripts with pods embedded in comments). For details and examples, please see L<Pod::Usage>. =item Pod::Text and Pod::Man Pod::Text has been rewritten to use Pod::Parser. While pod2text() is still available for backwards compatibility, the module now has a new preferred interface. See L<Pod::Text> for the details. The new Pod::Text module is easily subclassed for tweaks to the output, and two such subclasses (Pod::Text::Termcap for man-page-style bold and underlining using termcap information, and Pod::Text::Color for markup with ANSI color sequences) are now standard. pod2man has been turned into a module, Pod::Man, which also uses Pod::Parser. In the process, several outstanding bugs related to quotes in section headers, quoting of code escapes, and nested lists have been fixed. pod2man is now a wrapper script around this module. =item SDBM_File An EXISTS method has been added to this module (and sdbm_exists() has been added to the underlying sdbm library), so one can now call exists on an SDBM_File tied hash and get the correct result, rather than a runtime error. A bug that may have caused data loss when more than one disk block happens to be read from the database in a single FETCH() has been fixed. =item Sys::Syslog Sys::Syslog now uses XSUBs to access facilities from syslog.h so it no longer requires syslog.ph to exist. =item Sys::Hostname Sys::Hostname now uses XSUBs to call the C library's gethostname() or uname() if they exist. =item Term::ANSIColor Term::ANSIColor is a very simple module to provide easy and readable access to the ANSI color and highlighting escape sequences, supported by most ANSI terminal emulators. It is now included standard. =item Time::Local The timelocal() and timegm() functions used to silently return bogus results when the date fell outside the machine's integer range. They now consistently croak() if the date falls in an unsupported range. =item Win32 The error return value in list context has been changed for all functions that return a list of values. Previously these functions returned a list with a single element C<undef> if an error occurred. Now these functions return the empty list in these situations. This applies to the following functions: Win32::FsType Win32::GetOSVersion The remaining functions are unchanged and continue to return C<undef> on error even in list context. The Win32::SetLastError(ERROR) function has been added as a complement to the Win32::GetLastError() function. The new Win32::GetFullPathName(FILENAME) returns the full absolute pathname for FILENAME in scalar context. In list context it returns a two-element list containing the fully qualified directory name and the filename. See L<Win32>. =item XSLoader The XSLoader extension is a simpler alternative to DynaLoader. See L<XSLoader>. =item DBM Filters A new feature called "DBM Filters" has been added to all the DBM modules--DB_File, GDBM_File, NDBM_File, ODBM_File, and SDBM_File. DBM Filters add four new methods to each DBM module: filter_store_key filter_store_value filter_fetch_key filter_fetch_value These can be used to filter key-value pairs before the pairs are written to the database or just after they are read from the database. See L<perldbmfilter> for further information. =back =head2 Pragmata C<use attrs> is now obsolete, and is only provided for backward-compatibility. It's been replaced by the C<sub : attributes> syntax. See L<perlsub/"Subroutine Attributes"> and L<attributes>. Lexical warnings pragma, C<use warnings;>, to control optional warnings. See L<perllexwarn>. C<use filetest> to control the behaviour of filetests (C<-r> C<-w> ...). Currently only one subpragma implemented, "use filetest 'access';", that uses access(2) or equivalent to check permissions instead of using stat(2) as usual. This matters in filesystems where there are ACLs (access control lists): the stat(2) might lie, but access(2) knows better. The C<open> pragma can be used to specify default disciplines for handle constructors (e.g. open()) and for qx//. The two pseudo-disciplines C<:raw> and C<:crlf> are currently supported on DOS-derivative platforms (i.e. where binmode is not a no-op). See also L</"binmode() can be used to set :crlf and :raw modes">. =head1 Utility Changes =head2 dprofpp C<dprofpp> is used to display profile data generated using C<Devel::DProf>. See L<dprofpp>. =head2 find2perl The C<find2perl> utility now uses the enhanced features of the File::Find module. The -depth and -follow options are supported. Pod documentation is also included in the script. =head2 h2xs The C<h2xs> tool can now work in conjunction with C<C::Scan> (available from CPAN) to automatically parse real-life header files. The C<-M>, C<-a>, C<-k>, and C<-o> options are new. =head2 perlcc C<perlcc> now supports the C and Bytecode backends. By default, it generates output from the simple C backend rather than the optimized C backend. Support for non-Unix platforms has been improved. =head2 perldoc C<perldoc> has been reworked to avoid possible security holes. It will not by default let itself be run as the superuser, but you may still use the B<-U> switch to try to make it drop privileges first. =head2 The Perl Debugger Many bug fixes and enhancements were added to F<perl5db.pl>, the Perl debugger. The help documentation was rearranged. New commands include C<< < ? >>, C<< > ? >>, and C<< { ? >> to list out current actions, C<man I<docpage>> to run your doc viewer on some perl docset, and support for quoted options. The help information was rearranged, and should be viewable once again if you're using B<less> as your pager. A serious security hole was plugged--you should immediately remove all older versions of the Perl debugger as installed in previous releases, all the way back to perl3, from your system to avoid being bitten by this. =head1 Improved Documentation Many of the platform-specific README files are now part of the perl installation. See L<perl> for the complete list. =over 4 =item perlapi.pod The official list of public Perl API functions. =item perlboot.pod A tutorial for beginners on object-oriented Perl. =item perlcompile.pod An introduction to using the Perl Compiler suite. =item perldbmfilter.pod A howto document on using the DBM filter facility. =item perldebug.pod All material unrelated to running the Perl debugger, plus all low-level guts-like details that risked crushing the casual user of the debugger, have been relocated from the old manpage to the next entry below. =item perldebguts.pod This new manpage contains excessively low-level material not related to the Perl debugger, but slightly related to debugging Perl itself. It also contains some arcane internal details of how the debugging process works that may only be of interest to developers of Perl debuggers. =item perlfork.pod Notes on the fork() emulation currently available for the Windows platform. =item perlfilter.pod An introduction to writing Perl source filters. =item perlhack.pod Some guidelines for hacking the Perl source code. =item perlintern.pod A list of internal functions in the Perl source code. (List is currently empty.) =item perllexwarn.pod Introduction and reference information about lexically scoped warning categories. =item perlnumber.pod Detailed information about numbers as they are represented in Perl. =item perlopentut.pod A tutorial on using open() effectively. =item perlreftut.pod A tutorial that introduces the essentials of references. =item perltootc.pod A tutorial on managing class data for object modules. =item perltodo.pod Discussion of the most often wanted features that may someday be supported in Perl. =item perlunicode.pod An introduction to Unicode support features in Perl. =back =head1 Performance enhancements =head2 Simple sort() using { $a <=> $b } and the like are optimized Many common sort() operations using a simple inlined block are now optimized for faster performance. =head2 Optimized assignments to lexical variables Certain operations in the RHS of assignment statements have been optimized to directly set the lexical variable on the LHS, eliminating redundant copying overheads. =head2 Faster subroutine calls Minor changes in how subroutine calls are handled internally provide marginal improvements in performance. =head2 delete(), each(), values() and hash iteration are faster The hash values returned by delete(), each(), values() and hashes in a list context are the actual values in the hash, instead of copies. This results in significantly better performance, because it eliminates needless copying in most situations. =head1 Installation and Configuration Improvements =head2 -Dusethreads means something different The -Dusethreads flag now enables the experimental interpreter-based thread support by default. To get the flavor of experimental threads that was in 5.005 instead, you need to run Configure with "-Dusethreads -Duse5005threads". As of v5.6.0, interpreter-threads support is still lacking a way to create new threads from Perl (i.e., C<use Thread;> will not work with interpreter threads). C<use Thread;> continues to be available when you specify the -Duse5005threads option to Configure, bugs and all. NOTE: Support for threads continues to be an experimental feature. Interfaces and implementation are subject to sudden and drastic changes. =head2 New Configure flags The following new flags may be enabled on the Configure command line by running Configure with C<-Dflag>. usemultiplicity usethreads useithreads (new interpreter threads: no Perl API yet) usethreads use5005threads (threads as they were in 5.005) use64bitint (equal to now deprecated 'use64bits') use64bitall uselongdouble usemorebits uselargefiles usesocks (only SOCKS v5 supported) =head2 Threadedness and 64-bitness now more daring The Configure options enabling the use of threads and the use of 64-bitness are now more daring in the sense that they no more have an explicit list of operating systems of known threads/64-bit capabilities. In other words: if your operating system has the necessary APIs and datatypes, you should be able just to go ahead and use them, for threads by Configure -Dusethreads, and for 64 bits either explicitly by Configure -Duse64bitint or implicitly if your system has 64-bit wide datatypes. See also L</"64-bit support">. =head2 Long Doubles Some platforms have "long doubles", floating point numbers of even larger range than ordinary "doubles". To enable using long doubles for Perl's scalars, use -Duselongdouble. =head2 -Dusemorebits You can enable both -Duse64bitint and -Duselongdouble with -Dusemorebits. See also L</"64-bit support">. =head2 -Duselargefiles Some platforms support system APIs that are capable of handling large files (typically, files larger than two gigabytes). Perl will try to use these APIs if you ask for -Duselargefiles. See L</"Large file support"> for more information. =head2 installusrbinperl You can use "Configure -Uinstallusrbinperl" which causes installperl to skip installing perl also as /usr/bin/perl. This is useful if you prefer not to modify /usr/bin for some reason or another but harmful because many scripts assume to find Perl in /usr/bin/perl. =head2 SOCKS support You can use "Configure -Dusesocks" which causes Perl to probe for the SOCKS proxy protocol library (v5, not v4). For more information on SOCKS, see: http://www.socks.nec.com/ =head2 C<-A> flag You can "post-edit" the Configure variables using the Configure C<-A> switch. The editing happens immediately after the platform specific hints files have been processed but before the actual configuration process starts. Run C<Configure -h> to find out the full C<-A> syntax. =head2 Enhanced Installation Directories The installation structure has been enriched to improve the support for maintaining multiple versions of perl, to provide locations for vendor-supplied modules, scripts, and manpages, and to ease maintenance of locally-added modules, scripts, and manpages. See the section on Installation Directories in the INSTALL file for complete details. For most users building and installing from source, the defaults should be fine. If you previously used C<Configure -Dsitelib> or C<-Dsitearch> to set special values for library directories, you might wish to consider using the new C<-Dsiteprefix> setting instead. Also, if you wish to re-use a config.sh file from an earlier version of perl, you should be sure to check that Configure makes sensible choices for the new directories. See INSTALL for complete details. =head2 gcc automatically tried if 'cc' does not seem to be working In many platforms the vendor-supplied 'cc' is too stripped-down to build Perl (basically, the 'cc' doesn't do ANSI C). If this seems to be the case and the 'cc' does not seem to be the GNU C compiler 'gcc', an automatic attempt is made to find and use 'gcc' instead. =head1 Platform specific changes =head2 Supported platforms =over 4 =item * The Mach CThreads (NEXTSTEP, OPENSTEP) are now supported by the Thread extension. =item * GNU/Hurd is now supported. =item * Rhapsody/Darwin is now supported. =item * EPOC is now supported (on Psion 5). =item * The cygwin port (formerly cygwin32) has been greatly improved. =back =head2 DOS =over 4 =item * Perl now works with djgpp 2.02 (and 2.03 alpha). =item * Environment variable names are not converted to uppercase any more. =item * Incorrect exit codes from backticks have been fixed. =item * This port continues to use its own builtin globbing (not File::Glob). =back =head2 OS390 (OpenEdition MVS) Support for this EBCDIC platform has not been renewed in this release. There are difficulties in reconciling Perl's standardization on UTF-8 as its internal representation for characters with the EBCDIC character set, because the two are incompatible. It is unclear whether future versions will renew support for this platform, but the possibility exists. =head2 VMS Numerous revisions and extensions to configuration, build, testing, and installation process to accommodate core changes and VMS-specific options. Expand %ENV-handling code to allow runtime mapping to logical names, CLI symbols, and CRTL environ array. Extension of subprocess invocation code to accept filespecs as command "verbs". Add to Perl command line processing the ability to use default file types and to recognize Unix-style C<2E<gt>&1>. Expansion of File::Spec::VMS routines, and integration into ExtUtils::MM_VMS. Extension of ExtUtils::MM_VMS to handle complex extensions more flexibly. Barewords at start of Unix-syntax paths may be treated as text rather than only as logical names. Optional secure translation of several logical names used internally by Perl. Miscellaneous bugfixing and porting of new core code to VMS. Thanks are gladly extended to the many people who have contributed VMS patches, testing, and ideas. =head2 Win32 Perl can now emulate fork() internally, using multiple interpreters running in different concurrent threads. This support must be enabled at build time. See L<perlfork> for detailed information. When given a pathname that consists only of a drivename, such as C<A:>, opendir() and stat() now use the current working directory for the drive rather than the drive root. The builtin XSUB functions in the Win32:: namespace are documented. See L<Win32>. $^X now contains the full path name of the running executable. A Win32::GetLongPathName() function is provided to complement Win32::GetFullPathName() and Win32::GetShortPathName(). See L<Win32>. POSIX::uname() is supported. system(1,...) now returns true process IDs rather than process handles. kill() accepts any real process id, rather than strictly return values from system(1,...). For better compatibility with Unix, C<kill(0, $pid)> can now be used to test whether a process exists. The C<Shell> module is supported. Better support for building Perl under command.com in Windows 95 has been added. Scripts are read in binary mode by default to allow ByteLoader (and the filter mechanism in general) to work properly. For compatibility, the DATA filehandle will be set to text mode if a carriage return is detected at the end of the line containing the __END__ or __DATA__ token; if not, the DATA filehandle will be left open in binary mode. Earlier versions always opened the DATA filehandle in text mode. The glob() operator is implemented via the C<File::Glob> extension, which supports glob syntax of the C shell. This increases the flexibility of the glob() operator, but there may be compatibility issues for programs that relied on the older globbing syntax. If you want to preserve compatibility with the older syntax, you might want to run perl with C<-MFile::DosGlob>. For details and compatibility information, see L<File::Glob>. =head1 Significant bug fixes =head2 <HANDLE> on empty files With C<$/> set to C<undef>, "slurping" an empty file returns a string of zero length (instead of C<undef>, as it used to) the first time the HANDLE is read after C<$/> is set to C<undef>. Further reads yield C<undef>. This means that the following will append "foo" to an empty file (it used to do nothing): perl -0777 -pi -e 's/^/foo/' empty_file The behaviour of: perl -pi -e 's/^/foo/' empty_file is unchanged (it continues to leave the file empty). =head2 C<eval '...'> improvements Line numbers (as reflected by caller() and most diagnostics) within C<eval '...'> were often incorrect where here documents were involved. This has been corrected. Lexical lookups for variables appearing in C<eval '...'> within functions that were themselves called within an C<eval '...'> were searching the wrong place for lexicals. The lexical search now correctly ends at the subroutine's block boundary. The use of C<return> within C<eval {...}> caused $@ not to be reset correctly when no exception occurred within the eval. This has been fixed. Parsing of here documents used to be flawed when they appeared as the replacement expression in C<eval 's/.../.../e'>. This has been fixed. =head2 All compilation errors are true errors Some "errors" encountered at compile time were by necessity generated as warnings followed by eventual termination of the program. This enabled more such errors to be reported in a single run, rather than causing a hard stop at the first error that was encountered. The mechanism for reporting such errors has been reimplemented to queue compile-time errors and report them at the end of the compilation as true errors rather than as warnings. This fixes cases where error messages leaked through in the form of warnings when code was compiled at run time using C<eval STRING>, and also allows such errors to be reliably trapped using C<eval "...">. =head2 Implicitly closed filehandles are safer Sometimes implicitly closed filehandles (as when they are localized, and Perl automatically closes them on exiting the scope) could inadvertently set $? or $!. This has been corrected. =head2 Behavior of list slices is more consistent When taking a slice of a literal list (as opposed to a slice of an array or hash), Perl used to return an empty list if the result happened to be composed of all undef values. The new behavior is to produce an empty list if (and only if) the original list was empty. Consider the following example: @a = (1,undef,undef,2)[2,1,2]; The old behavior would have resulted in @a having no elements. The new behavior ensures it has three undefined elements. Note in particular that the behavior of slices of the following cases remains unchanged: @a = ()[1,2]; @a = (getpwent)[7,0]; @a = (anything_returning_empty_list())[2,1,2]; @a = @b[2,1,2]; @a = @c{'a','b','c'}; See L<perldata>. =head2 C<(\$)> prototype and C<$foo{a}> A scalar reference prototype now correctly allows a hash or array element in that slot. =head2 C<goto &sub> and AUTOLOAD The C<goto &sub> construct works correctly when C<&sub> happens to be autoloaded. =head2 C<-bareword> allowed under C<use integer> The autoquoting of barewords preceded by C<-> did not work in prior versions when the C<integer> pragma was enabled. This has been fixed. =head2 Failures in DESTROY() When code in a destructor threw an exception, it went unnoticed in earlier versions of Perl, unless someone happened to be looking in $@ just after the point the destructor happened to run. Such failures are now visible as warnings when warnings are enabled. =head2 Locale bugs fixed printf() and sprintf() previously reset the numeric locale back to the default "C" locale. This has been fixed. Numbers formatted according to the local numeric locale (such as using a decimal comma instead of a decimal dot) caused "isn't numeric" warnings, even while the operations accessing those numbers produced correct results. These warnings have been discontinued. =head2 Memory leaks The C<eval 'return sub {...}'> construct could sometimes leak memory. This has been fixed. Operations that aren't filehandle constructors used to leak memory when used on invalid filehandles. This has been fixed. Constructs that modified C<@_> could fail to deallocate values in C<@_> and thus leak memory. This has been corrected. =head2 Spurious subroutine stubs after failed subroutine calls Perl could sometimes create empty subroutine stubs when a subroutine was not found in the package. Such cases stopped later method lookups from progressing into base packages. This has been corrected. =head2 Taint failures under C<-U> When running in unsafe mode, taint violations could sometimes cause silent failures. This has been fixed. =head2 END blocks and the C<-c> switch Prior versions used to run BEGIN B<and> END blocks when Perl was run in compile-only mode. Since this is typically not the expected behavior, END blocks are not executed anymore when the C<-c> switch is used, or if compilation fails. See L</"Support for CHECK blocks"> for how to run things when the compile phase ends. =head2 Potential to leak DATA filehandles Using the C<__DATA__> token creates an implicit filehandle to the file that contains the token. It is the program's responsibility to close it when it is done reading from it. This caveat is now better explained in the documentation. See L<perldata>. =head1 New or Changed Diagnostics =over 4 =item "%s" variable %s masks earlier declaration in same %s (W misc) A "my" or "our" variable has been redeclared in the current scope or statement, effectively eliminating all access to the previous instance. This is almost always a typographical error. Note that the earlier variable will still exist until the end of the scope or until all closure referents to it are destroyed. =item "my sub" not yet implemented (F) Lexically scoped subroutines are not yet implemented. Don't try that yet. =item "our" variable %s redeclared (W misc) You seem to have already declared the same global once before in the current lexical scope. =item '!' allowed only after types %s (F) The '!' is allowed in pack() and unpack() only after certain types. See L<perlfunc/pack>. =item / cannot take a count (F) You had an unpack template indicating a counted-length string, but you have also specified an explicit size for the string. See L<perlfunc/pack>. =item / must be followed by a, A or Z (F) You had an unpack template indicating a counted-length string, which must be followed by one of the letters a, A or Z to indicate what sort of string is to be unpacked. See L<perlfunc/pack>. =item / must be followed by a*, A* or Z* (F) You had a pack template indicating a counted-length string, Currently the only things that can have their length counted are a*, A* or Z*. See L<perlfunc/pack>. =item / must follow a numeric type (F) You had an unpack template that contained a '#', but this did not follow some numeric unpack specification. See L<perlfunc/pack>. =item /%s/: Unrecognized escape \\%c passed through (W regexp) You used a backslash-character combination which is not recognized by Perl. This combination appears in an interpolated variable or a C<'>-delimited regular expression. The character was understood literally. =item /%s/: Unrecognized escape \\%c in character class passed through (W regexp) You used a backslash-character combination which is not recognized by Perl inside character classes. The character was understood literally. =item /%s/ should probably be written as "%s" (W syntax) You have used a pattern where Perl expected to find a string, as in the first argument to C<join>. Perl will treat the true or false result of matching the pattern against $_ as the string, which is probably not what you had in mind. =item %s() called too early to check prototype (W prototype) You've called a function that has a prototype before the parser saw a definition or declaration for it, and Perl could not check that the call conforms to the prototype. You need to either add an early prototype declaration for the subroutine in question, or move the subroutine definition ahead of the call to get proper prototype checking. Alternatively, if you are certain that you're calling the function correctly, you may put an ampersand before the name to avoid the warning. See L<perlsub>. =item %s argument is not a HASH or ARRAY element (F) The argument to exists() must be a hash or array element, such as: $foo{$bar} $ref->{"susie"}[12] =item %s argument is not a HASH or ARRAY element or slice (F) The argument to delete() must be either a hash or array element, such as: $foo{$bar} $ref->{"susie"}[12] or a hash or array slice, such as: @foo[$bar, $baz, $xyzzy] @{$ref->[12]}{"susie", "queue"} =item %s argument is not a subroutine name (F) The argument to exists() for C<exists &sub> must be a subroutine name, and not a subroutine call. C<exists &sub()> will generate this error. =item %s package attribute may clash with future reserved word: %s (W reserved) A lowercase attribute name was used that had a package-specific handler. That name might have a meaning to Perl itself some day, even though it doesn't yet. Perhaps you should use a mixed-case attribute name, instead. See L<attributes>. =item (in cleanup) %s (W misc) This prefix usually indicates that a DESTROY() method raised the indicated exception. Since destructors are usually called by the system at arbitrary points during execution, and often a vast number of times, the warning is issued only once for any number of failures that would otherwise result in the same message being repeated. Failure of user callbacks dispatched using the C<G_KEEPERR> flag could also result in this warning. See L<perlcall/G_KEEPERR>. =item <> should be quotes (F) You wrote C<< require <file> >> when you should have written C<require 'file'>. =item Attempt to join self (F) You tried to join a thread from within itself, which is an impossible task. You may be joining the wrong thread, or you may need to move the join() to some other thread. =item Bad evalled substitution pattern (F) You've used the /e switch to evaluate the replacement for a substitution, but perl found a syntax error in the code to evaluate, most likely an unexpected right brace '}'. =item Bad realloc() ignored (S) An internal routine called realloc() on something that had never been malloc()ed in the first place. Mandatory, but can be disabled by setting environment variable C<PERL_BADFREE> to 1. =item Bareword found in conditional (W bareword) The compiler found a bareword where it expected a conditional, which often indicates that an || or && was parsed as part of the last argument of the previous construct, for example: open FOO || die; It may also indicate a misspelled constant that has been interpreted as a bareword: use constant TYPO => 1; if (TYOP) { print "foo" } The C<strict> pragma is useful in avoiding such errors. =item Binary number > 0b11111111111111111111111111111111 non-portable (W portable) The binary number you specified is larger than 2**32-1 (4294967295) and therefore non-portable between systems. See L<perlport> for more on portability concerns. =item Bit vector size > 32 non-portable (W portable) Using bit vector sizes larger than 32 is non-portable. =item Buffer overflow in prime_env_iter: %s (W internal) A warning peculiar to VMS. While Perl was preparing to iterate over %ENV, it encountered a logical name or symbol definition which was too long, so it was truncated to the string shown. =item Can't check filesystem of script "%s" (P) For some reason you can't check the filesystem of the script for nosuid. =item Can't declare class for non-scalar %s in "%s" (S) Currently, only scalar variables can declared with a specific class qualifier in a "my" or "our" declaration. The semantics may be extended for other types of variables in future. =item Can't declare %s in "%s" (F) Only scalar, array, and hash variables may be declared as "my" or "our" variables. They must have ordinary identifiers as names. =item Can't ignore signal CHLD, forcing to default (W signal) Perl has detected that it is being run with the SIGCHLD signal (sometimes known as SIGCLD) disabled. Since disabling this signal will interfere with proper determination of exit status of child processes, Perl has reset the signal to its default value. This situation typically indicates that the parent program under which Perl may be running (e.g., cron) is being very careless. =item Can't modify non-lvalue subroutine call (F) Subroutines meant to be used in lvalue context should be declared as such, see L<perlsub/"Lvalue subroutines">. =item Can't read CRTL environ (S) A warning peculiar to VMS. Perl tried to read an element of %ENV from the CRTL's internal environment array and discovered the array was missing. You need to figure out where your CRTL misplaced its environ or define F<PERL_ENV_TABLES> (see L<perlvms>) so that environ is not searched. =item Can't remove %s: %s, skipping file (S) You requested an inplace edit without creating a backup file. Perl was unable to remove the original file to replace it with the modified file. The file was left unmodified. =item Can't return %s from lvalue subroutine (F) Perl detected an attempt to return illegal lvalues (such as temporary or readonly values) from a subroutine used as an lvalue. This is not allowed. =item Can't weaken a nonreference (F) You attempted to weaken something that was not a reference. Only references can be weakened. =item Character class [:%s:] unknown (F) The class in the character class [: :] syntax is unknown. See L<perlre>. =item Character class syntax [%s] belongs inside character classes (W unsafe) The character class constructs [: :], [= =], and [. .] go I<inside> character classes, the [] are part of the construct, for example: /[012[:alpha:]345]/. Note that [= =] and [. .] are not currently implemented; they are simply placeholders for future extensions. =item Constant is not %s reference (F) A constant value (perhaps declared using the C<use constant> pragma) is being dereferenced, but it amounts to the wrong type of reference. The message indicates the type of reference that was expected. This usually indicates a syntax error in dereferencing the constant value. See L<perlsub/"Constant Functions"> and L<constant>. =item constant(%s): %s (F) The parser found inconsistencies either while attempting to define an overloaded constant, or when trying to find the character name specified in the C<\N{...}> escape. Perhaps you forgot to load the corresponding C<overload> or C<charnames> pragma? See L<charnames> and L<overload>. =item CORE::%s is not a keyword (F) The CORE:: namespace is reserved for Perl keywords. =item defined(@array) is deprecated (D) defined() is not usually useful on arrays because it checks for an undefined I<scalar> value. If you want to see if the array is empty, just use C<if (@array) { # not empty }> for example. =item defined(%hash) is deprecated (D) defined() is not usually useful on hashes because it checks for an undefined I<scalar> value. If you want to see if the hash is empty, just use C<if (%hash) { # not empty }> for example. =item Did not produce a valid header See Server error. =item (Did you mean "local" instead of "our"?) (W misc) Remember that "our" does not localize the declared global variable. You have declared it again in the same lexical scope, which seems superfluous. =item Document contains no data See Server error. =item entering effective %s failed (F) While under the C<use filetest> pragma, switching the real and effective uids or gids failed. =item false [] range "%s" in regexp (W regexp) A character class range must start and end at a literal character, not another character class like C<\d> or C<[:alpha:]>. The "-" in your false range is interpreted as a literal "-". Consider quoting the "-", "\-". See L<perlre>. =item Filehandle %s opened only for output (W io) You tried to read from a filehandle opened only for writing. If you intended it to be a read/write filehandle, you needed to open it with "+<" or "+>" or "+>>" instead of with "<" or nothing. If you intended only to read from the file, use "<". See L<perlfunc/open>. =item flock() on closed filehandle %s (W closed) The filehandle you're attempting to flock() got itself closed some time before now. Check your logic flow. flock() operates on filehandles. Are you attempting to call flock() on a dirhandle by the same name? =item Global symbol "%s" requires explicit package name (F) You've said "use strict vars", which indicates that all variables must either be lexically scoped (using "my"), declared beforehand using "our", or explicitly qualified to say which package the global variable is in (using "::"). =item Hexadecimal number > 0xffffffff non-portable (W portable) The hexadecimal number you specified is larger than 2**32-1 (4294967295) and therefore non-portable between systems. See L<perlport> for more on portability concerns. =item Ill-formed CRTL environ value "%s" (W internal) A warning peculiar to VMS. Perl tried to read the CRTL's internal environ array, and encountered an element without the C<=> delimiter used to separate keys from values. The element is ignored. =item Ill-formed message in prime_env_iter: |%s| (W internal) A warning peculiar to VMS. Perl tried to read a logical name or CLI symbol definition when preparing to iterate over %ENV, and didn't see the expected delimiter between key and value, so the line was ignored. =item Illegal binary digit %s (F) You used a digit other than 0 or 1 in a binary number. =item Illegal binary digit %s ignored (W digit) You may have tried to use a digit other than 0 or 1 in a binary number. Interpretation of the binary number stopped before the offending digit. =item Illegal number of bits in vec (F) The number of bits in vec() (the third argument) must be a power of two from 1 to 32 (or 64, if your platform supports that). =item Integer overflow in %s number (W overflow) The hexadecimal, octal or binary number you have specified either as a literal or as an argument to hex() or oct() is too big for your architecture, and has been converted to a floating point number. On a 32-bit architecture the largest hexadecimal, octal or binary number representable without overflow is 0xFFFFFFFF, 037777777777, or 0b11111111111111111111111111111111 respectively. Note that Perl transparently promotes all numbers to a floating point representation internally--subject to loss of precision errors in subsequent operations. =item Invalid %s attribute: %s The indicated attribute for a subroutine or variable was not recognized by Perl or by a user-supplied handler. See L<attributes>. =item Invalid %s attributes: %s The indicated attributes for a subroutine or variable were not recognized by Perl or by a user-supplied handler. See L<attributes>. =item invalid [] range "%s" in regexp The offending range is now explicitly displayed. =item Invalid separator character %s in attribute list (F) Something other than a colon or whitespace was seen between the elements of an attribute list. If the previous attribute had a parenthesised parameter list, perhaps that list was terminated too soon. See L<attributes>. =item Invalid separator character %s in subroutine attribute list (F) Something other than a colon or whitespace was seen between the elements of a subroutine attribute list. If the previous attribute had a parenthesised parameter list, perhaps that list was terminated too soon. =item leaving effective %s failed (F) While under the C<use filetest> pragma, switching the real and effective uids or gids failed. =item Lvalue subs returning %s not implemented yet (F) Due to limitations in the current implementation, array and hash values cannot be returned in subroutines used in lvalue context. See L<perlsub/"Lvalue subroutines">. =item Method %s not permitted See Server error. =item Missing %sbrace%s on \N{} (F) Wrong syntax of character name literal C<\N{charname}> within double-quotish context. =item Missing command in piped open (W pipe) You used the C<open(FH, "| command")> or C<open(FH, "command |")> construction, but the command was missing or blank. =item Missing name in "my sub" (F) The reserved syntax for lexically scoped subroutines requires that they have a name with which they can be found. =item No %s specified for -%c (F) The indicated command line switch needs a mandatory argument, but you haven't specified one. =item No package name allowed for variable %s in "our" (F) Fully qualified variable names are not allowed in "our" declarations, because that doesn't make much sense under existing semantics. Such syntax is reserved for future extensions. =item No space allowed after -%c (F) The argument to the indicated command line switch must follow immediately after the switch, without intervening spaces. =item no UTC offset information; assuming local time is UTC (S) A warning peculiar to VMS. Perl was unable to find the local timezone offset, so it's assuming that local system time is equivalent to UTC. If it's not, define the logical name F<SYS$TIMEZONE_DIFFERENTIAL> to translate to the number of seconds which need to be added to UTC to get local time. =item Octal number > 037777777777 non-portable (W portable) The octal number you specified is larger than 2**32-1 (4294967295) and therefore non-portable between systems. See L<perlport> for more on portability concerns. See also L<perlport> for writing portable code. =item panic: del_backref (P) Failed an internal consistency check while trying to reset a weak reference. =item panic: kid popen errno read (F) forked child returned an incomprehensible message about its errno. =item panic: magic_killbackrefs (P) Failed an internal consistency check while trying to reset all weak references to an object. =item Parentheses missing around "%s" list (W parenthesis) You said something like my $foo, $bar = @_; when you meant my ($foo, $bar) = @_; Remember that "my", "our", and "local" bind tighter than comma. =item Possible unintended interpolation of %s in string (W ambiguous) It used to be that Perl would try to guess whether you wanted an array interpolated or a literal @. It no longer does this; arrays are now I<always> interpolated into strings. This means that if you try something like: print "fred@example.com"; and the array C<@example> doesn't exist, Perl is going to print C<fred.com>, which is probably not what you wanted. To get a literal C<@> sign in a string, put a backslash before it, just as you would to get a literal C<$> sign. =item Possible Y2K bug: %s (W y2k) You are concatenating the number 19 with another number, which could be a potential Year 2000 problem. =item pragma "attrs" is deprecated, use "sub NAME : ATTRS" instead (W deprecated) You have written something like this: sub doit { use attrs qw(locked); } You should use the new declaration syntax instead. sub doit : locked { ... The C<use attrs> pragma is now obsolete, and is only provided for backward-compatibility. See L<perlsub/"Subroutine Attributes">. =item Premature end of script headers See Server error. =item Repeat count in pack overflows (F) You can't specify a repeat count so large that it overflows your signed integers. See L<perlfunc/pack>. =item Repeat count in unpack overflows (F) You can't specify a repeat count so large that it overflows your signed integers. See L<perlfunc/unpack>. =item realloc() of freed memory ignored (S) An internal routine called realloc() on something that had already been freed. =item Reference is already weak (W misc) You have attempted to weaken a reference that is already weak. Doing so has no effect. =item setpgrp can't take arguments (F) Your system has the setpgrp() from BSD 4.2, which takes no arguments, unlike POSIX setpgid(), which takes a process ID and process group ID. =item Strange *+?{} on zero-length expression (W regexp) You applied a regular expression quantifier in a place where it makes no sense, such as on a zero-width assertion. Try putting the quantifier inside the assertion instead. For example, the way to match "abc" provided that it is followed by three repetitions of "xyz" is C</abc(?=(?:xyz){3})/>, not C</abc(?=xyz){3}/>. =item switching effective %s is not implemented (F) While under the C<use filetest> pragma, we cannot switch the real and effective uids or gids. =item This Perl can't reset CRTL environ elements (%s) =item This Perl can't set CRTL environ elements (%s=%s) (W internal) Warnings peculiar to VMS. You tried to change or delete an element of the CRTL's internal environ array, but your copy of Perl wasn't built with a CRTL that contained the setenv() function. You'll need to rebuild Perl with a CRTL that does, or redefine F<PERL_ENV_TABLES> (see L<perlvms>) so that the environ array isn't the target of the change to %ENV which produced the warning. =item Too late to run %s block (W void) A CHECK or INIT block is being defined during run time proper, when the opportunity to run them has already passed. Perhaps you are loading a file with C<require> or C<do> when you should be using C<use> instead. Or perhaps you should put the C<require> or C<do> inside a BEGIN block. =item Unknown open() mode '%s' (F) The second argument of 3-argument open() is not among the list of valid modes: C<< < >>, C<< > >>, C<<< >> >>>, C<< +< >>, C<< +> >>, C<<< +>> >>>, C<-|>, C<|->. =item Unknown process %x sent message to prime_env_iter: %s (P) An error peculiar to VMS. Perl was reading values for %ENV before iterating over it, and someone else stuck a message in the stream of data Perl expected. Someone's very confused, or perhaps trying to subvert Perl's population of %ENV for nefarious purposes. =item Unrecognized escape \\%c passed through (W misc) You used a backslash-character combination which is not recognized by Perl. The character was understood literally. =item Unterminated attribute parameter in attribute list (F) The lexer saw an opening (left) parenthesis character while parsing an attribute list, but the matching closing (right) parenthesis character was not found. You may need to add (or remove) a backslash character to get your parentheses to balance. See L<attributes>. =item Unterminated attribute list (F) The lexer found something other than a simple identifier at the start of an attribute, and it wasn't a semicolon or the start of a block. Perhaps you terminated the parameter list of the previous attribute too soon. See L<attributes>. =item Unterminated attribute parameter in subroutine attribute list (F) The lexer saw an opening (left) parenthesis character while parsing a subroutine attribute list, but the matching closing (right) parenthesis character was not found. You may need to add (or remove) a backslash character to get your parentheses to balance. =item Unterminated subroutine attribute list (F) The lexer found something other than a simple identifier at the start of a subroutine attribute, and it wasn't a semicolon or the start of a block. Perhaps you terminated the parameter list of the previous attribute too soon. =item Value of CLI symbol "%s" too long (W misc) A warning peculiar to VMS. Perl tried to read the value of an %ENV element from a CLI symbol table, and found a resultant string longer than 1024 characters. The return value has been truncated to 1024 characters. =item Version number must be a constant number (P) The attempt to translate a C<use Module n.n LIST> statement into its equivalent C<BEGIN> block found an internal inconsistency with the version number. =back =head1 New tests =over 4 =item lib/attrs Compatibility tests for C<sub : attrs> vs the older C<use attrs>. =item lib/env Tests for new environment scalar capability (e.g., C<use Env qw($BAR);>). =item lib/env-array Tests for new environment array capability (e.g., C<use Env qw(@PATH);>). =item lib/io_const IO constants (SEEK_*, _IO*). =item lib/io_dir Directory-related IO methods (new, read, close, rewind, tied delete). =item lib/io_multihomed INET sockets with multi-homed hosts. =item lib/io_poll IO poll(). =item lib/io_unix UNIX sockets. =item op/attrs Regression tests for C<my ($x,@y,%z) : attrs> and <sub : attrs>. =item op/filetest File test operators. =item op/lex_assign Verify operations that access pad objects (lexicals and temporaries). =item op/exists_sub Verify C<exists &sub> operations. =back =head1 Incompatible Changes =head2 Perl Source Incompatibilities Beware that any new warnings that have been added or old ones that have been enhanced are B<not> considered incompatible changes. Since all new warnings must be explicitly requested via the C<-w> switch or the C<warnings> pragma, it is ultimately the programmer's responsibility to ensure that warnings are enabled judiciously. =over 4 =item CHECK is a new keyword All subroutine definitions named CHECK are now special. See C</"Support for CHECK blocks"> for more information. =item Treatment of list slices of undef has changed There is a potential incompatibility in the behavior of list slices that are comprised entirely of undefined values. See L</"Behavior of list slices is more consistent">. =item Format of $English::PERL_VERSION is different The English module now sets $PERL_VERSION to $^V (a string value) rather than C<$]> (a numeric value). This is a potential incompatibility. Send us a report via perlbug if you are affected by this. See L</"Improved Perl version numbering system"> for the reasons for this change. =item Literals of the form C<1.2.3> parse differently Previously, numeric literals with more than one dot in them were interpreted as a floating point number concatenated with one or more numbers. Such "numbers" are now parsed as strings composed of the specified ordinals. For example, C<print 97.98.99> used to output C<97.9899> in earlier versions, but now prints C<abc>. See L</"Support for strings represented as a vector of ordinals">. =item Possibly changed pseudo-random number generator Perl programs that depend on reproducing a specific set of pseudo-random numbers may now produce different output due to improvements made to the rand() builtin. You can use C<sh Configure -Drandfunc=rand> to obtain the old behavior. See L</"Better pseudo-random number generator">. =item Hashing function for hash keys has changed Even though Perl hashes are not order preserving, the apparently random order encountered when iterating on the contents of a hash is actually determined by the hashing algorithm used. Improvements in the algorithm may yield a random order that is B<different> from that of previous versions, especially when iterating on hashes. See L</"Better worst-case behavior of hashes"> for additional information. =item C<undef> fails on read only values Using the C<undef> operator on a readonly value (such as $1) has the same effect as assigning C<undef> to the readonly value--it throws an exception. =item Close-on-exec bit may be set on pipe and socket handles Pipe and socket handles are also now subject to the close-on-exec behavior determined by the special variable $^F. See L</"More consistent close-on-exec behavior">. =item Writing C<"$$1"> to mean C<"${$}1"> is unsupported Perl 5.004 deprecated the interpretation of C<$$1> and similar within interpolated strings to mean C<$$ . "1">, but still allowed it. In Perl 5.6.0 and later, C<"$$1"> always means C<"${$1}">. =item delete(), each(), values() and C<\(%h)> operate on aliases to values, not copies delete(), each(), values() and hashes (e.g. C<\(%h)>) in a list context return the actual values in the hash, instead of copies (as they used to in earlier versions). Typical idioms for using these constructs copy the returned values, but this can make a significant difference when creating references to the returned values. Keys in the hash are still returned as copies when iterating on a hash. See also L</"delete(), each(), values() and hash iteration are faster">. =item vec(EXPR,OFFSET,BITS) enforces powers-of-two BITS vec() generates a run-time error if the BITS argument is not a valid power-of-two integer. =item Text of some diagnostic output has changed Most references to internal Perl operations in diagnostics have been changed to be more descriptive. This may be an issue for programs that may incorrectly rely on the exact text of diagnostics for proper functioning. =item C<%@> has been removed The undocumented special variable C<%@> that used to accumulate "background" errors (such as those that happen in DESTROY()) has been removed, because it could potentially result in memory leaks. =item Parenthesized not() behaves like a list operator The C<not> operator now falls under the "if it looks like a function, it behaves like a function" rule. As a result, the parenthesized form can be used with C<grep> and C<map>. The following construct used to be a syntax error before, but it works as expected now: grep not($_), @things; On the other hand, using C<not> with a literal list slice may not work. The following previously allowed construct: print not (1,2,3)[0]; needs to be written with additional parentheses now: print not((1,2,3)[0]); The behavior remains unaffected when C<not> is not followed by parentheses. =item Semantics of bareword prototype C<(*)> have changed The semantics of the bareword prototype C<*> have changed. Perl 5.005 always coerced simple scalar arguments to a typeglob, which wasn't useful in situations where the subroutine must distinguish between a simple scalar and a typeglob. The new behavior is to not coerce bareword arguments to a typeglob. The value will always be visible as either a simple scalar or as a reference to a typeglob. See L</"More functional bareword prototype (*)">. =item Semantics of bit operators may have changed on 64-bit platforms If your platform is either natively 64-bit or if Perl has been configured to used 64-bit integers, i.e., $Config{ivsize} is 8, there may be a potential incompatibility in the behavior of bitwise numeric operators (& | ^ ~ << >>). These operators used to strictly operate on the lower 32 bits of integers in previous versions, but now operate over the entire native integral width. In particular, note that unary C<~> will produce different results on platforms that have different $Config{ivsize}. For portability, be sure to mask off the excess bits in the result of unary C<~>, e.g., C<~$x & 0xffffffff>. See L</"Bit operators support full native integer width">. =item More builtins taint their results As described in L</"Improved security features">, there may be more sources of taint in a Perl program. To avoid these new tainting behaviors, you can build Perl with the Configure option C<-Accflags=-DINCOMPLETE_TAINTS>. Beware that the ensuing perl binary may be insecure. =back =head2 C Source Incompatibilities =over 4 =item C<PERL_POLLUTE> Release 5.005 grandfathered old global symbol names by providing preprocessor macros for extension source compatibility. As of release 5.6.0, these preprocessor definitions are not available by default. You need to explicitly compile perl with C<-DPERL_POLLUTE> to get these definitions. For extensions still using the old symbols, this option can be specified via MakeMaker: perl Makefile.PL POLLUTE=1 =item C<PERL_IMPLICIT_CONTEXT> This new build option provides a set of macros for all API functions such that an implicit interpreter/thread context argument is passed to every API function. As a result of this, something like C<sv_setsv(foo,bar)> amounts to a macro invocation that actually translates to something like C<Perl_sv_setsv(my_perl,foo,bar)>. While this is generally expected to not have any significant source compatibility issues, the difference between a macro and a real function call will need to be considered. This means that there B<is> a source compatibility issue as a result of this if your extensions attempt to use pointers to any of the Perl API functions. Note that the above issue is not relevant to the default build of Perl, whose interfaces continue to match those of prior versions (but subject to the other options described here). See L<perlguts/Background and PERL_IMPLICIT_CONTEXT> for detailed information on the ramifications of building Perl with this option. NOTE: PERL_IMPLICIT_CONTEXT is automatically enabled whenever Perl is built with one of -Dusethreads, -Dusemultiplicity, or both. It is not intended to be enabled by users at this time. =item C<PERL_POLLUTE_MALLOC> Enabling Perl's malloc in release 5.005 and earlier caused the namespace of the system's malloc family of functions to be usurped by the Perl versions, since by default they used the same names. Besides causing problems on platforms that do not allow these functions to be cleanly replaced, this also meant that the system versions could not be called in programs that used Perl's malloc. Previous versions of Perl have allowed this behaviour to be suppressed with the HIDEMYMALLOC and EMBEDMYMALLOC preprocessor definitions. As of release 5.6.0, Perl's malloc family of functions have default names distinct from the system versions. You need to explicitly compile perl with C<-DPERL_POLLUTE_MALLOC> to get the older behaviour. HIDEMYMALLOC and EMBEDMYMALLOC have no effect, since the behaviour they enabled is now the default. Note that these functions do B<not> constitute Perl's memory allocation API. See L<perlguts/"Memory Allocation"> for further information about that. =back =head2 Compatible C Source API Changes =over 4 =item C<PATCHLEVEL> is now C<PERL_VERSION> The cpp macros C<PERL_REVISION>, C<PERL_VERSION>, and C<PERL_SUBVERSION> are now available by default from perl.h, and reflect the base revision, patchlevel, and subversion respectively. C<PERL_REVISION> had no prior equivalent, while C<PERL_VERSION> and C<PERL_SUBVERSION> were previously available as C<PATCHLEVEL> and C<SUBVERSION>. The new names cause less pollution of the B<cpp> namespace and reflect what the numbers have come to stand for in common practice. For compatibility, the old names are still supported when F<patchlevel.h> is explicitly included (as required before), so there is no source incompatibility from the change. =back =head2 Binary Incompatibilities In general, the default build of this release is expected to be binary compatible for extensions built with the 5.005 release or its maintenance versions. However, specific platforms may have broken binary compatibility due to changes in the defaults used in hints files. Therefore, please be sure to always check the platform-specific README files for any notes to the contrary. The usethreads or usemultiplicity builds are B<not> binary compatible with the corresponding builds in 5.005. On platforms that require an explicit list of exports (AIX, OS/2 and Windows, among others), purely internal symbols such as parser functions and the run time opcodes are not exported by default. Perl 5.005 used to export all functions irrespective of whether they were considered part of the public API or not. For the full list of public API functions, see L<perlapi>. =head1 Known Problems =head2 Localizing a tied hash element may leak memory As of the 5.6.1 release, there is a known leak when code such as this is executed: use Tie::Hash; tie my %tie_hash => 'Tie::StdHash'; ... local($tie_hash{Foo}) = 1; # leaks =head2 Known test failures =over =item * 64-bit builds Subtest #15 of lib/b.t may fail under 64-bit builds on platforms such as HP-UX PA64 and Linux IA64. The issue is still being investigated. The lib/io_multihomed test may hang in HP-UX if Perl has been configured to be 64-bit. Because other 64-bit platforms do not hang in this test, HP-UX is suspect. All other tests pass in 64-bit HP-UX. The test attempts to create and connect to "multihomed" sockets (sockets which have multiple IP addresses). Note that 64-bit support is still experimental. =item * Failure of Thread tests The subtests 19 and 20 of lib/thr5005.t test are known to fail due to fundamental problems in the 5.005 threading implementation. These are not new failures--Perl 5.005_0x has the same bugs, but didn't have these tests. (Note that support for 5.005-style threading remains experimental.) =item * NEXTSTEP 3.3 POSIX test failure In NEXTSTEP 3.3p2 the implementation of the strftime(3) in the operating system libraries is buggy: the %j format numbers the days of a month starting from zero, which, while being logical to programmers, will cause the subtests 19 to 27 of the lib/posix test may fail. =item * Tru64 (aka Digital UNIX, aka DEC OSF/1) lib/sdbm test failure with gcc If compiled with gcc 2.95 the lib/sdbm test will fail (dump core). The cure is to use the vendor cc, it comes with the operating system and produces good code. =back =head2 EBCDIC platforms not fully supported In earlier releases of Perl, EBCDIC environments like OS390 (also known as Open Edition MVS) and VM-ESA were supported. Due to changes required by the UTF-8 (Unicode) support, the EBCDIC platforms are not supported in Perl 5.6.0. The 5.6.1 release improves support for EBCDIC platforms, but they are not fully supported yet. =head2 UNICOS/mk CC failures during Configure run In UNICOS/mk the following errors may appear during the Configure run: Guessing which symbols your C compiler and preprocessor define... CC-20 cc: ERROR File = try.c, Line = 3 ... bad switch yylook 79bad switch yylook 79bad switch yylook 79bad switch yylook 79#ifdef A29K ... 4 errors detected in the compilation of "try.c". The culprit is the broken awk of UNICOS/mk. The effect is fortunately rather mild: Perl itself is not adversely affected by the error, only the h2ph utility coming with Perl, and that is rather rarely needed these days. =head2 Arrow operator and arrays When the left argument to the arrow operator C<< -> >> is an array, or the C<scalar> operator operating on an array, the result of the operation must be considered erroneous. For example: @x->[2] scalar(@x)->[2] These expressions will get run-time errors in some future release of Perl. =head2 Experimental features As discussed above, many features are still experimental. Interfaces and implementation of these features are subject to change, and in extreme cases, even subject to removal in some future release of Perl. These features include the following: =over 4 =item Threads =item Unicode =item 64-bit support =item Lvalue subroutines =item Weak references =item The pseudo-hash data type =item The Compiler suite =item Internal implementation of file globbing =item The DB module =item The regular expression code constructs: C<(?{ code })> and C<(??{ code })> =back =head1 Obsolete Diagnostics =over 4 =item Character class syntax [: :] is reserved for future extensions (W) Within regular expression character classes ([]) the syntax beginning with "[:" and ending with ":]" is reserved for future extensions. If you need to represent those character sequences inside a regular expression character class, just quote the square brackets with the backslash: "\[:" and ":\]". =item Ill-formed logical name |%s| in prime_env_iter (W) A warning peculiar to VMS. A logical name was encountered when preparing to iterate over %ENV which violates the syntactic rules governing logical names. Because it cannot be translated normally, it is skipped, and will not appear in %ENV. This may be a benign occurrence, as some software packages might directly modify logical name tables and introduce nonstandard names, or it may indicate that a logical name table has been corrupted. =item In string, @%s now must be written as \@%s The description of this error used to say: (Someday it will simply assume that an unbackslashed @ interpolates an array.) That day has come, and this fatal error has been removed. It has been replaced by a non-fatal warning instead. See L</Arrays now always interpolate into double-quoted strings> for details. =item Probable precedence problem on %s (W) The compiler found a bareword where it expected a conditional, which often indicates that an || or && was parsed as part of the last argument of the previous construct, for example: open FOO || die; =item regexp too big (F) The current implementation of regular expressions uses shorts as address offsets within a string. Unfortunately this means that if the regular expression compiles to longer than 32767, it'll blow up. Usually when you want a regular expression this big, there is a better way to do it with multiple statements. See L<perlre>. =item Use of "$$<digit>" to mean "${$}<digit>" is deprecated (D) Perl versions before 5.004 misinterpreted any type marker followed by "$" and a digit. For example, "$$0" was incorrectly taken to mean "${$}0" instead of "${$0}". This bug is (mostly) fixed in Perl 5.004. However, the developers of Perl 5.004 could not fix this bug completely, because at least two widely-used modules depend on the old meaning of "$$0" in a string. So Perl 5.004 still interprets "$$<digit>" in the old (broken) way inside strings; but it generates this message as a warning. And in Perl 5.005, this special treatment will cease. =back =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup. There may also be information at http://www.perl.com/ , the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. =head1 SEE ALSO The F<Changes> file for exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =head1 HISTORY Written by Gurusamy Sarathy <F<gsar@ActiveState.com>>, with many contributions from The Perl Porters. Send omissions or corrections to <F<perlbug@perl.org>>. =cut perlirix.pod 0000644 00000010477 15125556335 0007131 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specifically designed to be readable as is. =head1 NAME perlirix - Perl version 5 on Irix systems =head1 DESCRIPTION This document describes various features of Irix that will affect how Perl version 5 (hereafter just Perl) is compiled and/or runs. =head2 Building 32-bit Perl in Irix Use sh Configure -Dcc='cc -n32' to compile Perl 32-bit. Don't bother with -n32 unless you have 7.1 or later compilers (use cc -version to check). (Building 'cc -n32' is the default.) =head2 Building 64-bit Perl in Irix Use sh Configure -Dcc='cc -64' -Duse64bitint This requires require a 64-bit MIPS CPU (R8000, R10000, ...) You can also use sh Configure -Dcc='cc -64' -Duse64bitall but that makes no difference compared with the -Duse64bitint because of the C<cc -64>. You can also do sh Configure -Dcc='cc -n32' -Duse64bitint to use long longs for the 64-bit integer type, in case you don't have a 64-bit CPU. If you are using gcc, just sh Configure -Dcc=gcc -Duse64bitint should be enough, the Configure should automatically probe for the correct 64-bit settings. =head2 About Compiler Versions of Irix Some Irix cc versions, e.g. 7.3.1.1m (try cc -version) have been known to have issues (coredumps) when compiling perl.c. If you've used -OPT:fast_io=ON and this happens, try removing it. If that fails, or you didn't use that, then try adjusting other optimization options (-LNO, -INLINE, -O3 to -O2, etcetera). The compiler bug has been reported to SGI. (Allen Smith <easmith@beatrice.rutgers.edu>) =head2 Linker Problems in Irix If you get complaints about so_locations then search in the file hints/irix_6.sh for "lddflags" and do the suggested adjustments. (David Billinghurst <David.Billinghurst@riotinto.com.au>) =head2 Malloc in Irix Do not try to use Perl's malloc, this will lead into very mysterious errors (especially with -Duse64bitall). =head2 Building with threads in Irix Run Configure with -Duseithreads which will configure Perl with the Perl 5.8.0 "interpreter threads", see L<threads>. For Irix 6.2 with perl threads, you have to have the following patches installed: 1404 Irix 6.2 Posix 1003.1b man pages 1645 Irix 6.2 & 6.3 POSIX header file updates 2000 Irix 6.2 Posix 1003.1b support modules 2254 Pthread library fixes 2401 6.2 all platform kernel rollup B<IMPORTANT>: Without patch 2401, a kernel bug in Irix 6.2 will cause your machine to panic and crash when running threaded perl. Irix 6.3 and later are okay. Thanks to Hannu Napari <Hannu.Napari@hut.fi> for the IRIX pthreads patches information. =head2 Irix 5.3 While running Configure and when building, you are likely to get quite a few of these warnings: ld: The shared object /usr/lib/libm.so did not resolve any symbols. You may want to remove it from your link line. Ignore them: in IRIX 5.3 there is no way to quieten ld about this. During compilation you will see this warning from toke.c: uopt: Warning: Perl_yylex: this procedure not optimized because it exceeds size threshold; to optimize this procedure, use -Olimit option with value >= 4252. Ignore the warning. In IRIX 5.3 and with Perl 5.8.1 (Perl 5.8.0 didn't compile in IRIX 5.3) the following failures are known. Failed Test Stat Wstat Total Fail Failed List of Failed ----------------------------------------------------------------------- ../ext/List/Util/t/shuffle.t 0 139 ?? ?? % ?? ../lib/Math/Trig.t 255 65280 29 12 41.38% 24-29 ../lib/sort.t 0 138 119 72 60.50% 48-119 56 tests and 474 subtests skipped. Failed 3/811 test scripts, 99.63% okay. 78/75813 subtests failed, 99.90% okay. They are suspected to be compiler errors (at least the shuffle.t failure is known from some IRIX 6 setups) and math library errors (the Trig.t failure), but since IRIX 5 is long since end-of-lifed, further fixes for the IRIX are unlikely. If you can get gcc for 5.3, you could try that, too, since gcc in IRIX 6 is a known workaround for at least the shuffle.t and sort.t failures. =head1 AUTHOR Jarkko Hietaniemi <jhi@iki.fi> Please report any errors, updates, or suggestions to L<https://github.com/Perl/perl5/issues>. perl5262delta.pod 0000644 00000017310 15125556335 0007557 0 ustar 00 =encoding utf8 =head1 NAME perl5262delta - what is new for perl v5.26.2 =head1 DESCRIPTION This document describes differences between the 5.26.1 release and the 5.26.2 release. If you are upgrading from an earlier release such as 5.26.0, first read L<perl5261delta>, which describes differences between 5.26.0 and 5.26.1. =head1 Security =head2 [CVE-2018-6797] heap-buffer-overflow (WRITE of size 1) in S_regatom (regcomp.c) A crafted regular expression could cause a heap buffer write overflow, with control over the bytes written. L<[perl #132227]|https://rt.perl.org/Public/Bug/Display.html?id=132227> =head2 [CVE-2018-6798] Heap-buffer-overflow in Perl__byte_dump_string (utf8.c) Matching a crafted locale dependent regular expression could cause a heap buffer read overflow and potentially information disclosure. L<[perl #132063]|https://rt.perl.org/Public/Bug/Display.html?id=132063> =head2 [CVE-2018-6913] heap-buffer-overflow in S_pack_rec C<pack()> could cause a heap buffer write overflow with a large item count. L<[perl #131844]|https://rt.perl.org/Public/Bug/Display.html?id=131844> =head2 Assertion failure in Perl__core_swash_init (utf8.c) Control characters in a supposed Unicode property name could cause perl to crash. This has been fixed. L<[perl #132055]|https://rt.perl.org/Public/Bug/Display.html?id=132055> L<[perl #132553]|https://rt.perl.org/Public/Bug/Display.html?id=132553> L<[perl #132658]|https://rt.perl.org/Public/Bug/Display.html?id=132658> =head1 Incompatible Changes There are no changes intentionally incompatible with 5.26.1. If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Module::CoreList> has been upgraded from version 5.20170922_26 to 5.20180414_26. =item * L<PerlIO::via> has been upgraded from version 0.16 to 0.17. =item * L<Term::ReadLine> has been upgraded from version 1.16 to 1.17. =item * L<Unicode::UCD> has been upgraded from version 0.68 to 0.69. =back =head1 Documentation =head2 Changes to Existing Documentation =head3 L<perluniprops> =over 4 =item * This has been updated to note that C<\p{Word}> now includes code points matching the C<\p{Join_Control}> property. The change to the property was made in Perl 5.18, but not documented until now. There are currently only two code points that match this property: U+200C (ZERO WIDTH NON-JOINER) and U+200D (ZERO WIDTH JOINER). =back =head1 Platform Support =head2 Platform-Specific Notes =over 4 =item Windows Visual C++ compiler version detection has been improved to work on non-English language systems. L<[perl #132421]|https://rt.perl.org/Public/Bug/Display.html?id=132421> We now set C<$Config{libpth}> correctly for 64-bit builds using Visual C++ versions earlier than 14.1. L<[perl #132484]|https://rt.perl.org/Public/Bug/Display.html?id=132484> =back =head1 Selected Bug Fixes =over 4 =item * The C<readpipe()> built-in function now checks at compile time that it has only one parameter expression, and puts it in scalar context, thus ensuring that it doesn't corrupt the stack at runtime. L<[perl #4574]|https://rt.perl.org/Public/Bug/Display.html?id=4574> =item * Fixed a use after free bug in C<pp_list> introduced in Perl 5.27.1. L<[perl #131954]|https://rt.perl.org/Public/Bug/Display.html?id=131954> =item * Parsing a C<sub> definition could cause a use after free if the C<sub> keyword was followed by whitespace including newlines (and comments). L<[perl #131836]|https://rt.perl.org/Public/Bug/Display.html?id=131836> =item * The tokenizer now correctly adjusts a parse pointer when skipping whitespace in an C< ${identifier} > construct. L<[perl #131949]|https://rt.perl.org/Public/Bug/Display.html?id=131949> =item * Accesses to C<${^LAST_FH}> no longer assert after using any of a variety of I/O operations on a non-glob. L<[perl #128263]|https://rt.perl.org/Public/Bug/Display.html?id=128263> =item * C<sort> now performs correct reference counting when aliasing C<$a> and C<$b>, thus avoiding premature destruction and leakage of scalars if they are re-aliased during execution of the sort comparator. L<[perl #92264]|https://rt.perl.org/Public/Bug/Display.html?id=92264> =item * Some convoluted kinds of regexp no longer cause an arithmetic overflow when compiled. L<[perl #131893]|https://rt.perl.org/Public/Bug/Display.html?id=131893> =item * Fixed a duplicate symbol failure with B<-flto -mieee-fp> builds. F<pp.c> defined C<_LIB_VERSION> which B<-lieee> already defines. L<[perl #131786]|https://rt.perl.org/Public/Bug/Display.html?id=131786> =item * A NULL pointer dereference in the C<S_regmatch()> function has been fixed. L<[perl #132017]|https://rt.perl.org/Public/Bug/Display.html?id=132017> =item * Failures while compiling code within other constructs, such as with string interpolation and the right part of C<s///e> now cause compilation to abort earlier. Previously compilation could continue in order to report other errors, but the failed sub-parse could leave partly parsed constructs on the parser shift-reduce stack, confusing the parser, leading to perl crashes. L<[perl #125351]|https://rt.perl.org/Public/Bug/Display.html?id=125351> =back =head1 Acknowledgements Perl 5.26.2 represents approximately 7 months of development since Perl 5.26.1 and contains approximately 3,300 lines of changes across 82 files from 17 authors. Excluding auto-generated files, documentation and release tools, there were approximately 1,800 lines of changes to 36 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.26.2: Aaron Crane, Abigail, Chris 'BinGOs' Williams, H.Merijn Brand, James E Keenan, Jarkko Hietaniemi, John SJ Anderson, Karen Etheridge, Karl Williamson, Lukas Mai, Renee Baecker, Sawyer X, Steve Hay, Todd Rinaldo, Tony Cook, Yves Orton, Zefram. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the perl bug database at L<https://rt.perl.org/> . There may also be information at L<http://www.perl.org/> , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications which make it inappropriate to send to a publicly archived mailing list, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 Give Thanks If you wish to thank the Perl 5 Porters for the work we had done in Perl 5, you can do so by running the C<perlthanks> program: perlthanks This will send an email to the Perl 5 Porters list with your show of thanks. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl.pod 0000644 00000040433 15125556335 0006230 0 ustar 00 =head1 NAME perl - The Perl 5 language interpreter =head1 SYNOPSIS B<perl> S<[ B<-sTtuUWX> ]> S<[ B<-hv> ] [ B<-V>[:I<configvar>] ]> S<[ B<-cw> ] [ B<-d>[B<t>][:I<debugger>] ] [ B<-D>[I<number/list>] ]> S<[ B<-pna> ] [ B<-F>I<pattern> ] [ B<-l>[I<octal>] ] [ B<-0>[I<octal/hexadecimal>] ]> S<[ B<-I>I<dir> ] [ B<-m>[B<->]I<module> ] [ B<-M>[B<->]I<'module...'> ] [ B<-f> ]> S<[ B<-C [I<number/list>] >]> S<[ B<-S> ]> S<[ B<-x>[I<dir>] ]> S<[ B<-i>[I<extension>] ]> S<[ [B<-e>|B<-E>] I<'command'> ] [ B<--> ] [ I<programfile> ] [ I<argument> ]...> For more information on these options, you can run C<perldoc perlrun>. =head1 GETTING HELP The F<perldoc> program gives you access to all the documentation that comes with Perl. You can get more documentation, tutorials and community support online at L<https://www.perl.org/>. If you're new to Perl, you should start by running C<perldoc perlintro>, which is a general intro for beginners and provides some background to help you navigate the rest of Perl's extensive documentation. Run C<perldoc perldoc> to learn more things you can do with F<perldoc>. For ease of access, the Perl manual has been split up into several sections. =begin buildtoc # This section is parsed by Porting/pod_lib.pl for use by pod/buildtoc etc flag =g perluniprops perlmodlib perlapi perlintern flag =go perltoc flag =ro perlcn perljp perlko perltw flag = perlvms path perlfaq.* cpan/perlfaq/lib/ path perlglossary cpan/perlfaq/lib/ path perlxs(?:tut|typemap)? dist/ExtUtils-ParseXS/lib/ path perldoc cpan/Pod-Perldoc/ aux h2ph h2xs perlbug pl2pm pod2html pod2man splain xsubpp =end buildtoc =head2 Overview perl Perl overview (this section) perlintro Perl introduction for beginners perlrun Perl execution and options perltoc Perl documentation table of contents =head2 Tutorials perlreftut Perl references short introduction perldsc Perl data structures intro perllol Perl data structures: arrays of arrays perlrequick Perl regular expressions quick start perlretut Perl regular expressions tutorial perlootut Perl OO tutorial for beginners perlperf Perl Performance and Optimization Techniques perlstyle Perl style guide perlcheat Perl cheat sheet perltrap Perl traps for the unwary perldebtut Perl debugging tutorial perlfaq Perl frequently asked questions perlfaq1 General Questions About Perl perlfaq2 Obtaining and Learning about Perl perlfaq3 Programming Tools perlfaq4 Data Manipulation perlfaq5 Files and Formats perlfaq6 Regexes perlfaq7 Perl Language Issues perlfaq8 System Interaction perlfaq9 Networking =head2 Reference Manual perlsyn Perl syntax perldata Perl data structures perlop Perl operators and precedence perlsub Perl subroutines perlfunc Perl built-in functions perlopentut Perl open() tutorial perlpacktut Perl pack() and unpack() tutorial perlpod Perl plain old documentation perlpodspec Perl plain old documentation format specification perlpodstyle Perl POD style guide perldiag Perl diagnostic messages perldeprecation Perl deprecations perllexwarn Perl warnings and their control perldebug Perl debugging perlvar Perl predefined variables perlre Perl regular expressions, the rest of the story perlrebackslash Perl regular expression backslash sequences perlrecharclass Perl regular expression character classes perlreref Perl regular expressions quick reference perlref Perl references, the rest of the story perlform Perl formats perlobj Perl objects perltie Perl objects hidden behind simple variables perldbmfilter Perl DBM filters perlipc Perl interprocess communication perlfork Perl fork() information perlnumber Perl number semantics perlthrtut Perl threads tutorial perlport Perl portability guide perllocale Perl locale support perluniintro Perl Unicode introduction perlunicode Perl Unicode support perlunicook Perl Unicode cookbook perlunifaq Perl Unicode FAQ perluniprops Index of Unicode properties in Perl perlunitut Perl Unicode tutorial perlebcdic Considerations for running Perl on EBCDIC platforms perlsec Perl security perlsecpolicy Perl security report handling policy perlmod Perl modules: how they work perlmodlib Perl modules: how to write and use perlmodstyle Perl modules: how to write modules with style perlmodinstall Perl modules: how to install from CPAN perlnewmod Perl modules: preparing a new module for distribution perlpragma Perl modules: writing a user pragma perlutil utilities packaged with the Perl distribution perlfilter Perl source filters perldtrace Perl's support for DTrace perlglossary Perl Glossary =head2 Internals and C Language Interface perlembed Perl ways to embed perl in your C or C++ application perldebguts Perl debugging guts and tips perlxstut Perl XS tutorial perlxs Perl XS application programming interface perlxstypemap Perl XS C/Perl type conversion tools perlclib Internal replacements for standard C library functions perlguts Perl internal functions for those doing extensions perlcall Perl calling conventions from C perlmroapi Perl method resolution plugin interface perlreapi Perl regular expression plugin interface perlreguts Perl regular expression engine internals perlapi Perl API listing (autogenerated) perlintern Perl internal functions (autogenerated) perliol C API for Perl's implementation of IO in Layers perlapio Perl internal IO abstraction interface perlhack Perl hackers guide perlsource Guide to the Perl source tree perlinterp Overview of the Perl interpreter source and how it works perlhacktut Walk through the creation of a simple C code patch perlhacktips Tips for Perl core C code hacking perlpolicy Perl development policies perlgov Perl Rules of Governance perlgit Using git with the Perl repository =head2 Miscellaneous perlbook Perl book information perlcommunity Perl community information perldoc Look up Perl documentation in Pod format perlhist Perl history records perldelta Perl changes since previous version perl5320delta Perl changes in version 5.32.0 perl5303delta Perl changes in version 5.30.3 perl5302delta Perl changes in version 5.30.2 perl5301delta Perl changes in version 5.30.1 perl5300delta Perl changes in version 5.30.0 perl5283delta Perl changes in version 5.28.3 perl5282delta Perl changes in version 5.28.2 perl5281delta Perl changes in version 5.28.1 perl5280delta Perl changes in version 5.28.0 perl5263delta Perl changes in version 5.26.3 perl5262delta Perl changes in version 5.26.2 perl5261delta Perl changes in version 5.26.1 perl5260delta Perl changes in version 5.26.0 perl5244delta Perl changes in version 5.24.4 perl5243delta Perl changes in version 5.24.3 perl5242delta Perl changes in version 5.24.2 perl5241delta Perl changes in version 5.24.1 perl5240delta Perl changes in version 5.24.0 perl5224delta Perl changes in version 5.22.4 perl5223delta Perl changes in version 5.22.3 perl5222delta Perl changes in version 5.22.2 perl5221delta Perl changes in version 5.22.1 perl5220delta Perl changes in version 5.22.0 perl5203delta Perl changes in version 5.20.3 perl5202delta Perl changes in version 5.20.2 perl5201delta Perl changes in version 5.20.1 perl5200delta Perl changes in version 5.20.0 perl5184delta Perl changes in version 5.18.4 perl5182delta Perl changes in version 5.18.2 perl5181delta Perl changes in version 5.18.1 perl5180delta Perl changes in version 5.18.0 perl5163delta Perl changes in version 5.16.3 perl5162delta Perl changes in version 5.16.2 perl5161delta Perl changes in version 5.16.1 perl5160delta Perl changes in version 5.16.0 perl5144delta Perl changes in version 5.14.4 perl5143delta Perl changes in version 5.14.3 perl5142delta Perl changes in version 5.14.2 perl5141delta Perl changes in version 5.14.1 perl5140delta Perl changes in version 5.14.0 perl5125delta Perl changes in version 5.12.5 perl5124delta Perl changes in version 5.12.4 perl5123delta Perl changes in version 5.12.3 perl5122delta Perl changes in version 5.12.2 perl5121delta Perl changes in version 5.12.1 perl5120delta Perl changes in version 5.12.0 perl5101delta Perl changes in version 5.10.1 perl5100delta Perl changes in version 5.10.0 perl589delta Perl changes in version 5.8.9 perl588delta Perl changes in version 5.8.8 perl587delta Perl changes in version 5.8.7 perl586delta Perl changes in version 5.8.6 perl585delta Perl changes in version 5.8.5 perl584delta Perl changes in version 5.8.4 perl583delta Perl changes in version 5.8.3 perl582delta Perl changes in version 5.8.2 perl581delta Perl changes in version 5.8.1 perl58delta Perl changes in version 5.8.0 perl561delta Perl changes in version 5.6.1 perl56delta Perl changes in version 5.6 perl5005delta Perl changes in version 5.005 perl5004delta Perl changes in version 5.004 perlexperiment A listing of experimental features in Perl perlartistic Perl Artistic License perlgpl GNU General Public License =head2 Language-Specific =for buildtoc flag +r perlcn Perl for Simplified Chinese (in EUC-CN) perljp Perl for Japanese (in EUC-JP) perlko Perl for Korean (in EUC-KR) perltw Perl for Traditional Chinese (in Big5) =head2 Platform-Specific perlaix Perl notes for AIX perlamiga Perl notes for AmigaOS perlandroid Perl notes for Android perlbs2000 Perl notes for POSIX-BC BS2000 perlcygwin Perl notes for Cygwin perldos Perl notes for DOS perlfreebsd Perl notes for FreeBSD perlhaiku Perl notes for Haiku perlhpux Perl notes for HP-UX perlhurd Perl notes for Hurd perlirix Perl notes for Irix perllinux Perl notes for Linux perlmacos Perl notes for Mac OS (Classic) perlmacosx Perl notes for Mac OS X perlnetware Perl notes for NetWare perlopenbsd Perl notes for OpenBSD perlos2 Perl notes for OS/2 perlos390 Perl notes for OS/390 perlos400 Perl notes for OS/400 perlplan9 Perl notes for Plan 9 perlqnx Perl notes for QNX perlriscos Perl notes for RISC OS perlsolaris Perl notes for Solaris perlsymbian Perl notes for Symbian perlsynology Perl notes for Synology perltru64 Perl notes for Tru64 perlvms Perl notes for VMS perlvos Perl notes for Stratus VOS perlwin32 Perl notes for Windows =for buildtoc flag -r =head2 Stubs for Deleted Documents perlboot perlbot perlrepository perltodo perltooc perltoot =for buildtoc __END__ On a Unix-like system, these documentation files will usually also be available as manpages for use with the F<man> program. Some documentation is not available as man pages, so if a cross-reference is not found by man, try it with L<perldoc>. Perldoc can also take you directly to documentation for functions (with the B<-f> switch). See C<perldoc --help> (or C<perldoc perldoc> or C<man perldoc>) for other helpful options L<perldoc> has to offer. In general, if something strange has gone wrong with your program and you're not sure where you should look for help, try making your code comply with B<use strict> and B<use warnings>. These will often point out exactly where the trouble is. =head1 DESCRIPTION Perl officially stands for Practical Extraction and Report Language, except when it doesn't. Perl was originally a language optimized for scanning arbitrary text files, extracting information from those text files, and printing reports based on that information. It quickly became a good language for many system management tasks. Over the years, Perl has grown into a general-purpose programming language. It's widely used for everything from quick "one-liners" to full-scale application development. The language is intended to be practical (easy to use, efficient, complete) rather than beautiful (tiny, elegant, minimal). It combines (in the author's opinion, anyway) some of the best features of B<sed>, B<awk>, and B<sh>, making it familiar and easy to use for Unix users to whip up quick solutions to annoying problems. Its general-purpose programming facilities support procedural, functional, and object-oriented programming paradigms, making Perl a comfortable language for the long haul on major projects, whatever your bent. Perl's roots in text processing haven't been forgotten over the years. It still boasts some of the most powerful regular expressions to be found anywhere, and its support for Unicode text is world-class. It handles all kinds of structured text, too, through an extensive collection of extensions. Those libraries, collected in the CPAN, provide ready-made solutions to an astounding array of problems. When they haven't set the standard themselves, they steal from the best -- just like Perl itself. =head1 AVAILABILITY Perl is available for most operating systems, including virtually all Unix-like platforms. See L<perlport/"Supported Platforms"> for a listing. =head1 ENVIRONMENT See L<perlrun/ENVIRONMENT>. =head1 AUTHOR Larry Wall <larry@wall.org>, with the help of oodles of other folks. If your Perl success stories and testimonials may be of help to others who wish to advocate the use of Perl in their applications, or if you wish to simply express your gratitude to Larry and the Perl developers, please write to perl-thanks@perl.org . =head1 FILES "@INC" locations of perl libraries "@INC" above is a reference to the built-in variable of the same name; see L<perlvar> for more information. =head1 SEE ALSO https://www.perl.org/ the Perl homepage https://www.perl.com/ Perl articles https://www.cpan.org/ the Comprehensive Perl Archive https://www.pm.org/ the Perl Mongers =head1 DIAGNOSTICS Using the C<use strict> pragma ensures that all variables are properly declared and prevents other misuses of legacy Perl features. The C<use warnings> pragma produces some lovely diagnostics. One can also use the B<-w> flag, but its use is normally discouraged, because it gets applied to all executed Perl code, including that not under your control. See L<perldiag> for explanations of all Perl's diagnostics. The C<use diagnostics> pragma automatically turns Perl's normally terse warnings and errors into these longer forms. Compilation errors will tell you the line number of the error, with an indication of the next token or token type that was to be examined. (In a script passed to Perl via B<-e> switches, each B<-e> is counted as one line.) Setuid scripts have additional constraints that can produce error messages such as "Insecure dependency". See L<perlsec>. Did we mention that you should definitely consider using the B<use warnings> pragma? =head1 BUGS The behavior implied by the B<use warnings> pragma is not mandatory. Perl is at the mercy of your machine's definitions of various operations such as type casting, atof(), and floating-point output with sprintf(). If your stdio requires a seek or eof between reads and writes on a particular stream, so does Perl. (This doesn't apply to sysread() and syswrite().) While none of the built-in data types have any arbitrary size limits (apart from memory size), there are still a few arbitrary limits: a given variable name may not be longer than 251 characters. Line numbers displayed by diagnostics are internally stored as short integers, so they are limited to a maximum of 65535 (higher numbers usually being affected by wraparound). You may submit your bug reports (be sure to include full configuration information as output by the myconfig program in the perl source tree, or by C<perl -V>) to L<https://github.com/Perl/perl5/issues>. Perl actually stands for Pathologically Eclectic Rubbish Lister, but don't tell anyone I said that. =head1 NOTES The Perl motto is "There's more than one way to do it." Divining how many more is left as an exercise to the reader. The three principal virtues of a programmer are Laziness, Impatience, and Hubris. See the Camel Book for why. perl5243delta.pod 0000644 00000026244 15125556335 0007564 0 ustar 00 =encoding utf8 =head1 NAME perl5243delta - what is new for perl v5.24.3 =head1 DESCRIPTION This document describes differences between the 5.24.2 release and the 5.24.3 release. If you are upgrading from an earlier release such as 5.24.1, first read L<perl5242delta>, which describes differences between 5.24.1 and 5.24.2. =head1 Security =head2 [CVE-2017-12837] Heap buffer overflow in regular expression compiler Compiling certain regular expression patterns with the case-insensitive modifier could cause a heap buffer overflow and crash perl. This has now been fixed. L<[perl #131582]|https://rt.perl.org/Public/Bug/Display.html?id=131582> =head2 [CVE-2017-12883] Buffer over-read in regular expression parser For certain types of syntax error in a regular expression pattern, the error message could either contain the contents of a random, possibly large, chunk of memory, or could crash perl. This has now been fixed. L<[perl #131598]|https://rt.perl.org/Public/Bug/Display.html?id=131598> =head2 [CVE-2017-12814] C<$ENV{$key}> stack buffer overflow on Windows A possible stack buffer overflow in the C<%ENV> code on Windows has been fixed by removing the buffer completely since it was superfluous anyway. L<[perl #131665]|https://rt.perl.org/Public/Bug/Display.html?id=131665> =head1 Incompatible Changes There are no changes intentionally incompatible with 5.24.2. If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Module::CoreList> has been upgraded from version 5.20170715_24 to 5.20170922_24. =item * L<POSIX> has been upgraded from version 1.65 to 1.65_01. =item * L<Time::HiRes> has been upgraded from version 1.9733 to 1.9741. L<[perl #128427]|https://rt.perl.org/Public/Bug/Display.html?id=128427> L<[perl #128445]|https://rt.perl.org/Public/Bug/Display.html?id=128445> L<[perl #128972]|https://rt.perl.org/Public/Bug/Display.html?id=128972> L<[cpan #120032]|https://rt.cpan.org/Public/Bug/Display.html?id=120032> =back =head1 Configuration and Compilation =over 4 =item * When building with GCC 6 and link-time optimization (the B<-flto> option to B<gcc>), F<Configure> was treating all probed symbols as present on the system, regardless of whether they actually exist. This has been fixed. L<[perl #128131]|https://rt.perl.org/Public/Bug/Display.html?id=128131> =item * F<Configure> now aborts if both C<-Duselongdouble> and C<-Dusequadmath> are requested. L<[perl #126203]|https://rt.perl.org/Public/Bug/Display.html?id=126203> =item * Fixed a bug in which F<Configure> could append C<-quadmath> to the archname even if it was already present. L<[perl #128538]|https://rt.perl.org/Public/Bug/Display.html?id=128538> =item * Clang builds with C<-DPERL_GLOBAL_STRUCT> or C<-DPERL_GLOBAL_STRUCT_PRIVATE> have been fixed (by disabling Thread Safety Analysis for these configurations). =back =head1 Platform Support =head2 Platform-Specific Notes =over 4 =item VMS =over 4 =item * C<configure.com> now recognizes the VSI-branded C compiler. =back =item Windows =over 4 =item * Building XS modules with GCC 6 in a 64-bit build of Perl failed due to incorrect mapping of C<strtoll> and C<strtoull>. This has now been fixed. L<[perl #131726]|https://rt.perl.org/Public/Bug/Display.html?id=131726> L<[cpan #121683]|https://rt.cpan.org/Public/Bug/Display.html?id=121683> L<[cpan #122353]|https://rt.cpan.org/Public/Bug/Display.html?id=122353> =back =back =head1 Selected Bug Fixes =over 4 =item * C<< /@0{0*-E<gt>@*/*0 >> and similar contortions used to crash, but no longer do, but merely produce a syntax error. L<[perl #128171]|https://rt.perl.org/Public/Bug/Display.html?id=128171> =item * C<do> or C<require> with an argument which is a reference or typeglob which, when stringified, contains a null character, started crashing in Perl 5.20, but has now been fixed. L<[perl #128182]|https://rt.perl.org/Public/Bug/Display.html?id=128182> =item * Expressions containing an C<&&> or C<||> operator (or their synonyms C<and> and C<or>) were being compiled incorrectly in some cases. If the left-hand side consisted of either a negated bareword constant or a negated C<do {}> block containing a constant expression, and the right-hand side consisted of a negated non-foldable expression, one of the negations was effectively ignored. The same was true of C<if> and C<unless> statement modifiers, though with the left-hand and right-hand sides swapped. This long-standing bug has now been fixed. L<[perl #127952]|https://rt.perl.org/Public/Bug/Display.html?id=127952> =item * C<reset> with an argument no longer crashes when encountering stash entries other than globs. L<[perl #128106]|https://rt.perl.org/Public/Bug/Display.html?id=128106> =item * Assignment of hashes to, and deletion of, typeglobs named C<*::::::> no longer causes crashes. L<[perl #128086]|https://rt.perl.org/Public/Bug/Display.html?id=128086> =item * Assignment variants of any bitwise ops under the C<bitwise> feature would crash if the left-hand side was an array or hash. L<[perl #128204]|https://rt.perl.org/Public/Bug/Display.html?id=128204> =item * C<socket> now leaves the error code returned by the system in C<$!> on failure. L<[perl #128316]|https://rt.perl.org/Public/Bug/Display.html?id=128316> =item * Parsing bad POSIX charclasses no longer leaks memory. L<[perl #128313]|https://rt.perl.org/Public/Bug/Display.html?id=128313> =item * Since Perl 5.20, line numbers have been off by one when perl is invoked with the B<-x> switch. This has been fixed. L<[perl #128508]|https://rt.perl.org/Public/Bug/Display.html?id=128508> =item * Some obscure cases of subroutines and file handles being freed at the same time could result in crashes, but have been fixed. The crash was introduced in Perl 5.22. L<[perl #128597]|https://rt.perl.org/Public/Bug/Display.html?id=128597> =item * Some regular expression parsing glitches could lead to assertion failures with regular expressions such as C</(?E<lt>=/> and C</(?E<lt>!/>. This has now been fixed. L<[perl #128170]|https://rt.perl.org/Public/Bug/Display.html?id=128170> =item * C<gethostent> and similar functions now perform a null check internally, to avoid crashing with the torsocks library. This was a regression from Perl 5.22. L<[perl #128740]|https://rt.perl.org/Public/Bug/Display.html?id=128740> =item * Mentioning the same constant twice in a row (which is a syntax error) no longer fails an assertion under debugging builds. This was a regression from Perl 5.20. L<[perl #126482]|https://rt.perl.org/Public/Bug/Display.html?id=126482> =item * In Perl 5.24 C<fchown> was changed not to accept negative one as an argument because in some platforms that is an error. However, in some other platforms that is an acceptable argument. This change has been reverted. L<[perl #128967]|https://rt.perl.org/Public/Bug/Display.html?id=128967>. =item * C<@{x> followed by a newline where C<"x"> represents a control or non-ASCII character no longer produces a garbled syntax error message or a crash. L<[perl #128951]|https://rt.perl.org/Public/Bug/Display.html?id=128951> =item * A regression in Perl 5.24 with C<tr/\N{U+...}/foo/> when the code point was between 128 and 255 has been fixed. L<[perl #128734]|https://rt.perl.org/Public/Bug/Display.html?id=128734>. =item * Many issues relating to C<printf "%a"> of hexadecimal floating point were fixed. In addition, the "subnormals" (formerly known as "denormals") floating point numbers are now supported both with the plain IEEE 754 floating point numbers (64-bit or 128-bit) and the x86 80-bit "extended precision". Note that subnormal hexadecimal floating point literals will give a warning about "exponent underflow". L<[perl #128843]|https://rt.perl.org/Public/Bug/Display.html?id=128843> L<[perl #128888]|https://rt.perl.org/Public/Bug/Display.html?id=128888> L<[perl #128889]|https://rt.perl.org/Public/Bug/Display.html?id=128889> L<[perl #128890]|https://rt.perl.org/Public/Bug/Display.html?id=128890> L<[perl #128893]|https://rt.perl.org/Public/Bug/Display.html?id=128893> L<[perl #128909]|https://rt.perl.org/Public/Bug/Display.html?id=128909> L<[perl #128919]|https://rt.perl.org/Public/Bug/Display.html?id=128919> =item * The parser could sometimes crash if a bareword came after C<evalbytes>. L<[perl #129196]|https://rt.perl.org/Public/Bug/Display.html?id=129196> =item * Fixed a place where the regex parser was not setting the syntax error correctly on a syntactically incorrect pattern. L<[perl #129122]|https://rt.perl.org/Public/Bug/Display.html?id=129122> =item * A vulnerability in Perl's C<sprintf> implementation has been fixed by avoiding a possible memory wrap. L<[perl #131260]|https://rt.perl.org/Public/Bug/Display.html?id=131260> =back =head1 Acknowledgements Perl 5.24.3 represents approximately 2 months of development since Perl 5.24.2 and contains approximately 3,200 lines of changes across 120 files from 23 authors. Excluding auto-generated files, documentation and release tools, there were approximately 1,600 lines of changes to 56 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.24.3: Aaron Crane, Craig A. Berry, Dagfinn Ilmari Mannsåker, Dan Collins, Daniel Dragan, Dave Cross, David Mitchell, Eric Herman, Father Chrysostomos, H.Merijn Brand, Hugo van der Sanden, James E Keenan, Jarkko Hietaniemi, John SJ Anderson, Karl Williamson, Ken Brown, Lukas Mai, Matthew Horsfall, Stevan Little, Steve Hay, Steven Humphrey, Tony Cook, Yves Orton. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at L<https://rt.perl.org/> . There may also be information at L<http://www.perl.org/> , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications which make it inappropriate to send to a publicly archived mailing list, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perliol.pod 0000644 00000103764 15125556335 0006743 0 ustar 00 =head1 NAME perliol - C API for Perl's implementation of IO in Layers. =head1 SYNOPSIS /* Defining a layer ... */ #include <perliol.h> =head1 DESCRIPTION This document describes the behavior and implementation of the PerlIO abstraction described in L<perlapio> when C<USE_PERLIO> is defined. =head2 History and Background The PerlIO abstraction was introduced in perl5.003_02 but languished as just an abstraction until perl5.7.0. However during that time a number of perl extensions switched to using it, so the API is mostly fixed to maintain (source) compatibility. The aim of the implementation is to provide the PerlIO API in a flexible and platform neutral manner. It is also a trial of an "Object Oriented C, with vtables" approach which may be applied to Raku. =head2 Basic Structure PerlIO is a stack of layers. The low levels of the stack work with the low-level operating system calls (file descriptors in C) getting bytes in and out, the higher layers of the stack buffer, filter, and otherwise manipulate the I/O, and return characters (or bytes) to Perl. Terms I<above> and I<below> are used to refer to the relative positioning of the stack layers. A layer contains a "vtable", the table of I/O operations (at C level a table of function pointers), and status flags. The functions in the vtable implement operations like "open", "read", and "write". When I/O, for example "read", is requested, the request goes from Perl first down the stack using "read" functions of each layer, then at the bottom the input is requested from the operating system services, then the result is returned up the stack, finally being interpreted as Perl data. The requests do not necessarily go always all the way down to the operating system: that's where PerlIO buffering comes into play. When you do an open() and specify extra PerlIO layers to be deployed, the layers you specify are "pushed" on top of the already existing default stack. One way to see it is that "operating system is on the left" and "Perl is on the right". What exact layers are in this default stack depends on a lot of things: your operating system, Perl version, Perl compile time configuration, and Perl runtime configuration. See L<PerlIO>, L<perlrun/PERLIO>, and L<open> for more information. binmode() operates similarly to open(): by default the specified layers are pushed on top of the existing stack. However, note that even as the specified layers are "pushed on top" for open() and binmode(), this doesn't mean that the effects are limited to the "top": PerlIO layers can be very 'active' and inspect and affect layers also deeper in the stack. As an example there is a layer called "raw" which repeatedly "pops" layers until it reaches the first layer that has declared itself capable of handling binary data. The "pushed" layers are processed in left-to-right order. sysopen() operates (unsurprisingly) at a lower level in the stack than open(). For example in Unix or Unix-like systems sysopen() operates directly at the level of file descriptors: in the terms of PerlIO layers, it uses only the "unix" layer, which is a rather thin wrapper on top of the Unix file descriptors. =head2 Layers vs Disciplines Initial discussion of the ability to modify IO streams behaviour used the term "discipline" for the entities which were added. This came (I believe) from the use of the term in "sfio", which in turn borrowed it from "line disciplines" on Unix terminals. However, this document (and the C code) uses the term "layer". This is, I hope, a natural term given the implementation, and should avoid connotations that are inherent in earlier uses of "discipline" for things which are rather different. =head2 Data Structures The basic data structure is a PerlIOl: typedef struct _PerlIO PerlIOl; typedef struct _PerlIO_funcs PerlIO_funcs; typedef PerlIOl *PerlIO; struct _PerlIO { PerlIOl * next; /* Lower layer */ PerlIO_funcs * tab; /* Functions for this layer */ U32 flags; /* Various flags for state */ }; A C<PerlIOl *> is a pointer to the struct, and the I<application> level C<PerlIO *> is a pointer to a C<PerlIOl *> - i.e. a pointer to a pointer to the struct. This allows the application level C<PerlIO *> to remain constant while the actual C<PerlIOl *> underneath changes. (Compare perl's C<SV *> which remains constant while its C<sv_any> field changes as the scalar's type changes.) An IO stream is then in general represented as a pointer to this linked-list of "layers". It should be noted that because of the double indirection in a C<PerlIO *>, a C<< &(perlio->next) >> "is" a C<PerlIO *>, and so to some degree at least one layer can use the "standard" API on the next layer down. A "layer" is composed of two parts: =over 4 =item 1. The functions and attributes of the "layer class". =item 2. The per-instance data for a particular handle. =back =head2 Functions and Attributes The functions and attributes are accessed via the "tab" (for table) member of C<PerlIOl>. The functions (methods of the layer "class") are fixed, and are defined by the C<PerlIO_funcs> type. They are broadly the same as the public C<PerlIO_xxxxx> functions: struct _PerlIO_funcs { Size_t fsize; char * name; Size_t size; IV kind; IV (*Pushed)(pTHX_ PerlIO *f, const char *mode, SV *arg, PerlIO_funcs *tab); IV (*Popped)(pTHX_ PerlIO *f); PerlIO * (*Open)(pTHX_ PerlIO_funcs *tab, PerlIO_list_t *layers, IV n, const char *mode, int fd, int imode, int perm, PerlIO *old, int narg, SV **args); IV (*Binmode)(pTHX_ PerlIO *f); SV * (*Getarg)(pTHX_ PerlIO *f, CLONE_PARAMS *param, int flags) IV (*Fileno)(pTHX_ PerlIO *f); PerlIO * (*Dup)(pTHX_ PerlIO *f, PerlIO *o, CLONE_PARAMS *param, int flags) /* Unix-like functions - cf sfio line disciplines */ SSize_t (*Read)(pTHX_ PerlIO *f, void *vbuf, Size_t count); SSize_t (*Unread)(pTHX_ PerlIO *f, const void *vbuf, Size_t count); SSize_t (*Write)(pTHX_ PerlIO *f, const void *vbuf, Size_t count); IV (*Seek)(pTHX_ PerlIO *f, Off_t offset, int whence); Off_t (*Tell)(pTHX_ PerlIO *f); IV (*Close)(pTHX_ PerlIO *f); /* Stdio-like buffered IO functions */ IV (*Flush)(pTHX_ PerlIO *f); IV (*Fill)(pTHX_ PerlIO *f); IV (*Eof)(pTHX_ PerlIO *f); IV (*Error)(pTHX_ PerlIO *f); void (*Clearerr)(pTHX_ PerlIO *f); void (*Setlinebuf)(pTHX_ PerlIO *f); /* Perl's snooping functions */ STDCHAR * (*Get_base)(pTHX_ PerlIO *f); Size_t (*Get_bufsiz)(pTHX_ PerlIO *f); STDCHAR * (*Get_ptr)(pTHX_ PerlIO *f); SSize_t (*Get_cnt)(pTHX_ PerlIO *f); void (*Set_ptrcnt)(pTHX_ PerlIO *f,STDCHAR *ptr,SSize_t cnt); }; The first few members of the struct give a function table size for compatibility check "name" for the layer, the size to C<malloc> for the per-instance data, and some flags which are attributes of the class as whole (such as whether it is a buffering layer), then follow the functions which fall into four basic groups: =over 4 =item 1. Opening and setup functions =item 2. Basic IO operations =item 3. Stdio class buffering options. =item 4. Functions to support Perl's traditional "fast" access to the buffer. =back A layer does not have to implement all the functions, but the whole table has to be present. Unimplemented slots can be NULL (which will result in an error when called) or can be filled in with stubs to "inherit" behaviour from a "base class". This "inheritance" is fixed for all instances of the layer, but as the layer chooses which stubs to populate the table, limited "multiple inheritance" is possible. =head2 Per-instance Data The per-instance data are held in memory beyond the basic PerlIOl struct, by making a PerlIOl the first member of the layer's struct thus: typedef struct { struct _PerlIO base; /* Base "class" info */ STDCHAR * buf; /* Start of buffer */ STDCHAR * end; /* End of valid part of buffer */ STDCHAR * ptr; /* Current position in buffer */ Off_t posn; /* Offset of buf into the file */ Size_t bufsiz; /* Real size of buffer */ IV oneword; /* Emergency buffer */ } PerlIOBuf; In this way (as for perl's scalars) a pointer to a PerlIOBuf can be treated as a pointer to a PerlIOl. =head2 Layers in action. table perlio unix | | +-----------+ +----------+ +--------+ PerlIO ->| |--->| next |--->| NULL | +-----------+ +----------+ +--------+ | | | buffer | | fd | +-----------+ | | +--------+ | | +----------+ The above attempts to show how the layer scheme works in a simple case. The application's C<PerlIO *> points to an entry in the table(s) representing open (allocated) handles. For example the first three slots in the table correspond to C<stdin>,C<stdout> and C<stderr>. The table in turn points to the current "top" layer for the handle - in this case an instance of the generic buffering layer "perlio". That layer in turn points to the next layer down - in this case the low-level "unix" layer. The above is roughly equivalent to a "stdio" buffered stream, but with much more flexibility: =over 4 =item * If Unix level C<read>/C<write>/C<lseek> is not appropriate for (say) sockets then the "unix" layer can be replaced (at open time or even dynamically) with a "socket" layer. =item * Different handles can have different buffering schemes. The "top" layer could be the "mmap" layer if reading disk files was quicker using C<mmap> than C<read>. An "unbuffered" stream can be implemented simply by not having a buffer layer. =item * Extra layers can be inserted to process the data as it flows through. This was the driving need for including the scheme in perl 5.7.0+ - we needed a mechanism to allow data to be translated between perl's internal encoding (conceptually at least Unicode as UTF-8), and the "native" format used by the system. This is provided by the ":encoding(xxxx)" layer which typically sits above the buffering layer. =item * A layer can be added that does "\n" to CRLF translation. This layer can be used on any platform, not just those that normally do such things. =back =head2 Per-instance flag bits The generic flag bits are a hybrid of C<O_XXXXX> style flags deduced from the mode string passed to C<PerlIO_open()>, and state bits for typical buffer layers. =over 4 =item PERLIO_F_EOF End of file. =item PERLIO_F_CANWRITE Writes are permitted, i.e. opened as "w" or "r+" or "a", etc. =item PERLIO_F_CANREAD Reads are permitted i.e. opened "r" or "w+" (or even "a+" - ick). =item PERLIO_F_ERROR An error has occurred (for C<PerlIO_error()>). =item PERLIO_F_TRUNCATE Truncate file suggested by open mode. =item PERLIO_F_APPEND All writes should be appends. =item PERLIO_F_CRLF Layer is performing Win32-like "\n" mapped to CR,LF for output and CR,LF mapped to "\n" for input. Normally the provided "crlf" layer is the only layer that need bother about this. C<PerlIO_binmode()> will mess with this flag rather than add/remove layers if the C<PERLIO_K_CANCRLF> bit is set for the layers class. =item PERLIO_F_UTF8 Data written to this layer should be UTF-8 encoded; data provided by this layer should be considered UTF-8 encoded. Can be set on any layer by ":utf8" dummy layer. Also set on ":encoding" layer. =item PERLIO_F_UNBUF Layer is unbuffered - i.e. write to next layer down should occur for each write to this layer. =item PERLIO_F_WRBUF The buffer for this layer currently holds data written to it but not sent to next layer. =item PERLIO_F_RDBUF The buffer for this layer currently holds unconsumed data read from layer below. =item PERLIO_F_LINEBUF Layer is line buffered. Write data should be passed to next layer down whenever a "\n" is seen. Any data beyond the "\n" should then be processed. =item PERLIO_F_TEMP File has been C<unlink()>ed, or should be deleted on C<close()>. =item PERLIO_F_OPEN Handle is open. =item PERLIO_F_FASTGETS This instance of this layer supports the "fast C<gets>" interface. Normally set based on C<PERLIO_K_FASTGETS> for the class and by the existence of the function(s) in the table. However a class that normally provides that interface may need to avoid it on a particular instance. The "pending" layer needs to do this when it is pushed above a layer which does not support the interface. (Perl's C<sv_gets()> does not expect the streams fast C<gets> behaviour to change during one "get".) =back =head2 Methods in Detail =over 4 =item fsize Size_t fsize; Size of the function table. This is compared against the value PerlIO code "knows" as a compatibility check. Future versions I<may> be able to tolerate layers compiled against an old version of the headers. =item name char * name; The name of the layer whose open() method Perl should invoke on open(). For example if the layer is called APR, you will call: open $fh, ">:APR", ... and Perl knows that it has to invoke the PerlIOAPR_open() method implemented by the APR layer. =item size Size_t size; The size of the per-instance data structure, e.g.: sizeof(PerlIOAPR) If this field is zero then C<PerlIO_pushed> does not malloc anything and assumes layer's Pushed function will do any required layer stack manipulation - used to avoid malloc/free overhead for dummy layers. If the field is non-zero it must be at least the size of C<PerlIOl>, C<PerlIO_pushed> will allocate memory for the layer's data structures and link new layer onto the stream's stack. (If the layer's Pushed method returns an error indication the layer is popped again.) =item kind IV kind; =over 4 =item * PERLIO_K_BUFFERED The layer is buffered. =item * PERLIO_K_RAW The layer is acceptable to have in a binmode(FH) stack - i.e. it does not (or will configure itself not to) transform bytes passing through it. =item * PERLIO_K_CANCRLF Layer can translate between "\n" and CRLF line ends. =item * PERLIO_K_FASTGETS Layer allows buffer snooping. =item * PERLIO_K_MULTIARG Used when the layer's open() accepts more arguments than usual. The extra arguments should come not before the C<MODE> argument. When this flag is used it's up to the layer to validate the args. =back =item Pushed IV (*Pushed)(pTHX_ PerlIO *f,const char *mode, SV *arg); The only absolutely mandatory method. Called when the layer is pushed onto the stack. The C<mode> argument may be NULL if this occurs post-open. The C<arg> will be non-C<NULL> if an argument string was passed. In most cases this should call C<PerlIOBase_pushed()> to convert C<mode> into the appropriate C<PERLIO_F_XXXXX> flags in addition to any actions the layer itself takes. If a layer is not expecting an argument it need neither save the one passed to it, nor provide C<Getarg()> (it could perhaps C<Perl_warn> that the argument was un-expected). Returns 0 on success. On failure returns -1 and should set errno. =item Popped IV (*Popped)(pTHX_ PerlIO *f); Called when the layer is popped from the stack. A layer will normally be popped after C<Close()> is called. But a layer can be popped without being closed if the program is dynamically managing layers on the stream. In such cases C<Popped()> should free any resources (buffers, translation tables, ...) not held directly in the layer's struct. It should also C<Unread()> any unconsumed data that has been read and buffered from the layer below back to that layer, so that it can be re-provided to what ever is now above. Returns 0 on success and failure. If C<Popped()> returns I<true> then I<perlio.c> assumes that either the layer has popped itself, or the layer is super special and needs to be retained for other reasons. In most cases it should return I<false>. =item Open PerlIO * (*Open)(...); The C<Open()> method has lots of arguments because it combines the functions of perl's C<open>, C<PerlIO_open>, perl's C<sysopen>, C<PerlIO_fdopen> and C<PerlIO_reopen>. The full prototype is as follows: PerlIO * (*Open)(pTHX_ PerlIO_funcs *tab, PerlIO_list_t *layers, IV n, const char *mode, int fd, int imode, int perm, PerlIO *old, int narg, SV **args); Open should (perhaps indirectly) call C<PerlIO_allocate()> to allocate a slot in the table and associate it with the layers information for the opened file, by calling C<PerlIO_push>. The I<layers> is an array of all the layers destined for the C<PerlIO *>, and any arguments passed to them, I<n> is the index into that array of the layer being called. The macro C<PerlIOArg> will return a (possibly C<NULL>) SV * for the argument passed to the layer. Where a layer opens or takes ownership of a file descriptor, that layer is responsible for getting the file descriptor's close-on-exec flag into the correct state. The flag should be clear for a file descriptor numbered less than or equal to C<PL_maxsysfd>, and set for any file descriptor numbered higher. For thread safety, when a layer opens a new file descriptor it should if possible open it with the close-on-exec flag initially set. The I<mode> string is an "C<fopen()>-like" string which would match the regular expression C</^[I#]?[rwa]\+?[bt]?$/>. The C<'I'> prefix is used during creation of C<stdin>..C<stderr> via special C<PerlIO_fdopen> calls; the C<'#'> prefix means that this is C<sysopen> and that I<imode> and I<perm> should be passed to C<PerlLIO_open3>; C<'r'> means B<r>ead, C<'w'> means B<w>rite and C<'a'> means B<a>ppend. The C<'+'> suffix means that both reading and writing/appending are permitted. The C<'b'> suffix means file should be binary, and C<'t'> means it is text. (Almost all layers should do the IO in binary mode, and ignore the b/t bits. The C<:crlf> layer should be pushed to handle the distinction.) If I<old> is not C<NULL> then this is a C<PerlIO_reopen>. Perl itself does not use this (yet?) and semantics are a little vague. If I<fd> not negative then it is the numeric file descriptor I<fd>, which will be open in a manner compatible with the supplied mode string, the call is thus equivalent to C<PerlIO_fdopen>. In this case I<nargs> will be zero. The file descriptor may have the close-on-exec flag either set or clear; it is the responsibility of the layer that takes ownership of it to get the flag into the correct state. If I<nargs> is greater than zero then it gives the number of arguments passed to C<open>, otherwise it will be 1 if for example C<PerlIO_open> was called. In simple cases SvPV_nolen(*args) is the pathname to open. If a layer provides C<Open()> it should normally call the C<Open()> method of next layer down (if any) and then push itself on top if that succeeds. C<PerlIOBase_open> is provided to do exactly that, so in most cases you don't have to write your own C<Open()> method. If this method is not defined, other layers may have difficulty pushing themselves on top of it during open. If C<PerlIO_push> was performed and open has failed, it must C<PerlIO_pop> itself, since if it's not, the layer won't be removed and may cause bad problems. Returns C<NULL> on failure. =item Binmode IV (*Binmode)(pTHX_ PerlIO *f); Optional. Used when C<:raw> layer is pushed (explicitly or as a result of binmode(FH)). If not present layer will be popped. If present should configure layer as binary (or pop itself) and return 0. If it returns -1 for error C<binmode> will fail with layer still on the stack. =item Getarg SV * (*Getarg)(pTHX_ PerlIO *f, CLONE_PARAMS *param, int flags); Optional. If present should return an SV * representing the string argument passed to the layer when it was pushed. e.g. ":encoding(ascii)" would return an SvPV with value "ascii". (I<param> and I<flags> arguments can be ignored in most cases) C<Dup> uses C<Getarg> to retrieve the argument originally passed to C<Pushed>, so you must implement this function if your layer has an extra argument to C<Pushed> and will ever be C<Dup>ed. =item Fileno IV (*Fileno)(pTHX_ PerlIO *f); Returns the Unix/Posix numeric file descriptor for the handle. Normally C<PerlIOBase_fileno()> (which just asks next layer down) will suffice for this. Returns -1 on error, which is considered to include the case where the layer cannot provide such a file descriptor. =item Dup PerlIO * (*Dup)(pTHX_ PerlIO *f, PerlIO *o, CLONE_PARAMS *param, int flags); XXX: Needs more docs. Used as part of the "clone" process when a thread is spawned (in which case param will be non-NULL) and when a stream is being duplicated via '&' in the C<open>. Similar to C<Open>, returns PerlIO* on success, C<NULL> on failure. =item Read SSize_t (*Read)(pTHX_ PerlIO *f, void *vbuf, Size_t count); Basic read operation. Typically will call C<Fill> and manipulate pointers (possibly via the API). C<PerlIOBuf_read()> may be suitable for derived classes which provide "fast gets" methods. Returns actual bytes read, or -1 on an error. =item Unread SSize_t (*Unread)(pTHX_ PerlIO *f, const void *vbuf, Size_t count); A superset of stdio's C<ungetc()>. Should arrange for future reads to see the bytes in C<vbuf>. If there is no obviously better implementation then C<PerlIOBase_unread()> provides the function by pushing a "fake" "pending" layer above the calling layer. Returns the number of unread chars. =item Write SSize_t (*Write)(PerlIO *f, const void *vbuf, Size_t count); Basic write operation. Returns bytes written or -1 on an error. =item Seek IV (*Seek)(pTHX_ PerlIO *f, Off_t offset, int whence); Position the file pointer. Should normally call its own C<Flush> method and then the C<Seek> method of next layer down. Returns 0 on success, -1 on failure. =item Tell Off_t (*Tell)(pTHX_ PerlIO *f); Return the file pointer. May be based on layers cached concept of position to avoid overhead. Returns -1 on failure to get the file pointer. =item Close IV (*Close)(pTHX_ PerlIO *f); Close the stream. Should normally call C<PerlIOBase_close()> to flush itself and close layers below, and then deallocate any data structures (buffers, translation tables, ...) not held directly in the data structure. Returns 0 on success, -1 on failure. =item Flush IV (*Flush)(pTHX_ PerlIO *f); Should make stream's state consistent with layers below. That is, any buffered write data should be written, and file position of lower layers adjusted for data read from below but not actually consumed. (Should perhaps C<Unread()> such data to the lower layer.) Returns 0 on success, -1 on failure. =item Fill IV (*Fill)(pTHX_ PerlIO *f); The buffer for this layer should be filled (for read) from layer below. When you "subclass" PerlIOBuf layer, you want to use its I<_read> method and to supply your own fill method, which fills the PerlIOBuf's buffer. Returns 0 on success, -1 on failure. =item Eof IV (*Eof)(pTHX_ PerlIO *f); Return end-of-file indicator. C<PerlIOBase_eof()> is normally sufficient. Returns 0 on end-of-file, 1 if not end-of-file, -1 on error. =item Error IV (*Error)(pTHX_ PerlIO *f); Return error indicator. C<PerlIOBase_error()> is normally sufficient. Returns 1 if there is an error (usually when C<PERLIO_F_ERROR> is set), 0 otherwise. =item Clearerr void (*Clearerr)(pTHX_ PerlIO *f); Clear end-of-file and error indicators. Should call C<PerlIOBase_clearerr()> to set the C<PERLIO_F_XXXXX> flags, which may suffice. =item Setlinebuf void (*Setlinebuf)(pTHX_ PerlIO *f); Mark the stream as line buffered. C<PerlIOBase_setlinebuf()> sets the PERLIO_F_LINEBUF flag and is normally sufficient. =item Get_base STDCHAR * (*Get_base)(pTHX_ PerlIO *f); Allocate (if not already done so) the read buffer for this layer and return pointer to it. Return NULL on failure. =item Get_bufsiz Size_t (*Get_bufsiz)(pTHX_ PerlIO *f); Return the number of bytes that last C<Fill()> put in the buffer. =item Get_ptr STDCHAR * (*Get_ptr)(pTHX_ PerlIO *f); Return the current read pointer relative to this layer's buffer. =item Get_cnt SSize_t (*Get_cnt)(pTHX_ PerlIO *f); Return the number of bytes left to be read in the current buffer. =item Set_ptrcnt void (*Set_ptrcnt)(pTHX_ PerlIO *f, STDCHAR *ptr, SSize_t cnt); Adjust the read pointer and count of bytes to match C<ptr> and/or C<cnt>. The application (or layer above) must ensure they are consistent. (Checking is allowed by the paranoid.) =back =head2 Utilities To ask for the next layer down use PerlIONext(PerlIO *f). To check that a PerlIO* is valid use PerlIOValid(PerlIO *f). (All this does is really just to check that the pointer is non-NULL and that the pointer behind that is non-NULL.) PerlIOBase(PerlIO *f) returns the "Base" pointer, or in other words, the C<PerlIOl*> pointer. PerlIOSelf(PerlIO* f, type) return the PerlIOBase cast to a type. Perl_PerlIO_or_Base(PerlIO* f, callback, base, failure, args) either calls the I<callback> from the functions of the layer I<f> (just by the name of the IO function, like "Read") with the I<args>, or if there is no such callback, calls the I<base> version of the callback with the same args, or if the f is invalid, set errno to EBADF and return I<failure>. Perl_PerlIO_or_fail(PerlIO* f, callback, failure, args) either calls the I<callback> of the functions of the layer I<f> with the I<args>, or if there is no such callback, set errno to EINVAL. Or if the f is invalid, set errno to EBADF and return I<failure>. Perl_PerlIO_or_Base_void(PerlIO* f, callback, base, args) either calls the I<callback> of the functions of the layer I<f> with the I<args>, or if there is no such callback, calls the I<base> version of the callback with the same args, or if the f is invalid, set errno to EBADF. Perl_PerlIO_or_fail_void(PerlIO* f, callback, args) either calls the I<callback> of the functions of the layer I<f> with the I<args>, or if there is no such callback, set errno to EINVAL. Or if the f is invalid, set errno to EBADF. =head2 Implementing PerlIO Layers If you find the implementation document unclear or not sufficient, look at the existing PerlIO layer implementations, which include: =over =item * C implementations The F<perlio.c> and F<perliol.h> in the Perl core implement the "unix", "perlio", "stdio", "crlf", "utf8", "byte", "raw", "pending" layers, and also the "mmap" and "win32" layers if applicable. (The "win32" is currently unfinished and unused, to see what is used instead in Win32, see L<PerlIO/"Querying the layers of filehandles"> .) PerlIO::encoding, PerlIO::scalar, PerlIO::via in the Perl core. PerlIO::gzip and APR::PerlIO (mod_perl 2.0) on CPAN. =item * Perl implementations PerlIO::via::QuotedPrint in the Perl core and PerlIO::via::* on CPAN. =back If you are creating a PerlIO layer, you may want to be lazy, in other words, implement only the methods that interest you. The other methods you can either replace with the "blank" methods PerlIOBase_noop_ok PerlIOBase_noop_fail (which do nothing, and return zero and -1, respectively) or for certain methods you may assume a default behaviour by using a NULL method. The Open method looks for help in the 'parent' layer. The following table summarizes the behaviour: method behaviour with NULL Clearerr PerlIOBase_clearerr Close PerlIOBase_close Dup PerlIOBase_dup Eof PerlIOBase_eof Error PerlIOBase_error Fileno PerlIOBase_fileno Fill FAILURE Flush SUCCESS Getarg SUCCESS Get_base FAILURE Get_bufsiz FAILURE Get_cnt FAILURE Get_ptr FAILURE Open INHERITED Popped SUCCESS Pushed SUCCESS Read PerlIOBase_read Seek FAILURE Set_cnt FAILURE Set_ptrcnt FAILURE Setlinebuf PerlIOBase_setlinebuf Tell FAILURE Unread PerlIOBase_unread Write FAILURE FAILURE Set errno (to EINVAL in Unixish, to LIB$_INVARG in VMS) and return -1 (for numeric return values) or NULL (for pointers) INHERITED Inherited from the layer below SUCCESS Return 0 (for numeric return values) or a pointer =head2 Core Layers The file C<perlio.c> provides the following layers: =over 4 =item "unix" A basic non-buffered layer which calls Unix/POSIX C<read()>, C<write()>, C<lseek()>, C<close()>. No buffering. Even on platforms that distinguish between O_TEXT and O_BINARY this layer is always O_BINARY. =item "perlio" A very complete generic buffering layer which provides the whole of PerlIO API. It is also intended to be used as a "base class" for other layers. (For example its C<Read()> method is implemented in terms of the C<Get_cnt()>/C<Get_ptr()>/C<Set_ptrcnt()> methods). "perlio" over "unix" provides a complete replacement for stdio as seen via PerlIO API. This is the default for USE_PERLIO when system's stdio does not permit perl's "fast gets" access, and which do not distinguish between C<O_TEXT> and C<O_BINARY>. =item "stdio" A layer which provides the PerlIO API via the layer scheme, but implements it by calling system's stdio. This is (currently) the default if system's stdio provides sufficient access to allow perl's "fast gets" access and which do not distinguish between C<O_TEXT> and C<O_BINARY>. =item "crlf" A layer derived using "perlio" as a base class. It provides Win32-like "\n" to CR,LF translation. Can either be applied above "perlio" or serve as the buffer layer itself. "crlf" over "unix" is the default if system distinguishes between C<O_TEXT> and C<O_BINARY> opens. (At some point "unix" will be replaced by a "native" Win32 IO layer on that platform, as Win32's read/write layer has various drawbacks.) The "crlf" layer is a reasonable model for a layer which transforms data in some way. =item "mmap" If Configure detects C<mmap()> functions this layer is provided (with "perlio" as a "base") which does "read" operations by mmap()ing the file. Performance improvement is marginal on modern systems, so it is mainly there as a proof of concept. It is likely to be unbundled from the core at some point. The "mmap" layer is a reasonable model for a minimalist "derived" layer. =item "pending" An "internal" derivative of "perlio" which can be used to provide Unread() function for layers which have no buffer or cannot be bothered. (Basically this layer's C<Fill()> pops itself off the stack and so resumes reading from layer below.) =item "raw" A dummy layer which never exists on the layer stack. Instead when "pushed" it actually pops the stack removing itself, it then calls Binmode function table entry on all the layers in the stack - normally this (via PerlIOBase_binmode) removes any layers which do not have C<PERLIO_K_RAW> bit set. Layers can modify that behaviour by defining their own Binmode entry. =item "utf8" Another dummy layer. When pushed it pops itself and sets the C<PERLIO_F_UTF8> flag on the layer which was (and now is once more) the top of the stack. =back In addition F<perlio.c> also provides a number of C<PerlIOBase_xxxx()> functions which are intended to be used in the table slots of classes which do not need to do anything special for a particular method. =head2 Extension Layers Layers can be made available by extension modules. When an unknown layer is encountered the PerlIO code will perform the equivalent of : use PerlIO 'layer'; Where I<layer> is the unknown layer. F<PerlIO.pm> will then attempt to: require PerlIO::layer; If after that process the layer is still not defined then the C<open> will fail. The following extension layers are bundled with perl: =over 4 =item ":encoding" use Encoding; makes this layer available, although F<PerlIO.pm> "knows" where to find it. It is an example of a layer which takes an argument as it is called thus: open( $fh, "<:encoding(iso-8859-7)", $pathname ); =item ":scalar" Provides support for reading data from and writing data to a scalar. open( $fh, "+<:scalar", \$scalar ); When a handle is so opened, then reads get bytes from the string value of I<$scalar>, and writes change the value. In both cases the position in I<$scalar> starts as zero but can be altered via C<seek>, and determined via C<tell>. Please note that this layer is implied when calling open() thus: open( $fh, "+<", \$scalar ); =item ":via" Provided to allow layers to be implemented as Perl code. For instance: use PerlIO::via::StripHTML; open( my $fh, "<:via(StripHTML)", "index.html" ); See L<PerlIO::via> for details. =back =head1 TODO Things that need to be done to improve this document. =over =item * Explain how to make a valid fh without going through open()(i.e. apply a layer). For example if the file is not opened through perl, but we want to get back a fh, like it was opened by Perl. How PerlIO_apply_layera fits in, where its docs, was it made public? Currently the example could be something like this: PerlIO *foo_to_PerlIO(pTHX_ char *mode, ...) { char *mode; /* "w", "r", etc */ const char *layers = ":APR"; /* the layer name */ PerlIO *f = PerlIO_allocate(aTHX); if (!f) { return NULL; } PerlIO_apply_layers(aTHX_ f, mode, layers); if (f) { PerlIOAPR *st = PerlIOSelf(f, PerlIOAPR); /* fill in the st struct, as in _open() */ st->file = file; PerlIOBase(f)->flags |= PERLIO_F_OPEN; return f; } return NULL; } =item * fix/add the documentation in places marked as XXX. =item * The handling of errors by the layer is not specified. e.g. when $! should be set explicitly, when the error handling should be just delegated to the top layer. Probably give some hints on using SETERRNO() or pointers to where they can be found. =item * I think it would help to give some concrete examples to make it easier to understand the API. Of course I agree that the API has to be concise, but since there is no second document that is more of a guide, I think that it'd make it easier to start with the doc which is an API, but has examples in it in places where things are unclear, to a person who is not a PerlIO guru (yet). =back =cut perl582delta.pod 0000644 00000010566 15125556335 0007505 0 ustar 00 =head1 NAME perl582delta - what is new for perl v5.8.2 =head1 DESCRIPTION This document describes differences between the 5.8.1 release and the 5.8.2 release. If you are upgrading from an earlier release such as 5.6.1, first read the L<perl58delta>, which describes differences between 5.6.0 and 5.8.0, and the L<perl581delta>, which describes differences between 5.8.0 and 5.8.1. =head1 Incompatible Changes For threaded builds for modules calling certain re-entrant system calls, binary compatibility was accidentally lost between 5.8.0 and 5.8.1. Binary compatibility with 5.8.0 has been restored in 5.8.2, which necessitates breaking compatibility with 5.8.1. We see this as the lesser of two evils. This will only affect people who have a threaded perl 5.8.1, and compiled modules which use these calls, and now attempt to run the compiled modules with 5.8.2. The fix is to re-compile and re-install the modules using 5.8.2. =head1 Core Enhancements =head2 Hash Randomisation The hash randomisation introduced with 5.8.1 has been amended. It transpired that although the implementation introduced in 5.8.1 was source compatible with 5.8.0, it was not binary compatible in certain cases. 5.8.2 contains an improved implementation which is both source and binary compatible with both 5.8.0 and 5.8.1, and remains robust against the form of attack which prompted the change for 5.8.1. We are grateful to the Debian project for their input in this area. See L<perlsec/"Algorithmic Complexity Attacks"> for the original rationale behind this change. =head2 Threading Several memory leaks associated with variables shared between threads have been fixed. =head1 Modules and Pragmata =head2 Updated Modules And Pragmata The following modules and pragmata have been updated since Perl 5.8.1: =over 4 =item Devel::PPPort =item Digest::MD5 =item I18N::LangTags =item libnet =item MIME::Base64 =item Pod::Perldoc =item strict Documentation improved =item Tie::Hash Documentation improved =item Time::HiRes =item Unicode::Collate =item Unicode::Normalize =item UNIVERSAL Documentation improved =back =head1 Selected Bug Fixes Some syntax errors involving unrecognized filetest operators are now handled correctly by the parser. =head1 Changed Internals Interpreter initialization is more complete when -DMULTIPLICITY is off. This should resolve problems with initializing and destroying the Perl interpreter more than once in a single process. =head1 Platform Specific Problems Dynamic linker flags have been tweaked for Solaris and OS X, which should solve problems seen while building some XS modules. Bugs in OS/2 sockets and tmpfile have been fixed. In OS X C<setreuid> and friends are troublesome - perl will now work around their problems as best possible. =head1 Future Directions Starting with 5.8.3 we intend to make more frequent maintenance releases, with a smaller number of changes in each. The intent is to propagate bug fixes out to stable releases more rapidly and make upgrading stable releases less of an upheaval. This should give end users more flexibility in their choice of upgrade timing, and allow them easier assessment of the impact of upgrades. The current plan is for code freezes as follows =over 4 =item * 5.8.3 23:59:59 GMT, Wednesday December 31st 2003 =item * 5.8.4 23:59:59 GMT, Wednesday March 31st 2004 =item * 5.8.5 23:59:59 GMT, Wednesday June 30th 2004 =back with the release following soon after, when testing is complete. See L<perl581delta/"Future Directions"> for more soothsaying. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://bugs.perl.org/. There may also be information at http://www.perl.com/, the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. You can browse and search the Perl 5 bugs at http://bugs.perl.org/ =head1 SEE ALSO The F<Changes> file for exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perldata.pod 0000644 00000141166 15125556335 0007067 0 ustar 00 =head1 NAME perldata - Perl data types =head1 DESCRIPTION =head2 Variable names X<variable, name> X<variable name> X<data type> X<type> Perl has three built-in data types: scalars, arrays of scalars, and associative arrays of scalars, known as "hashes". A scalar is a single string (of any size, limited only by the available memory), number, or a reference to something (which will be discussed in L<perlref>). Normal arrays are ordered lists of scalars indexed by number, starting with 0. Hashes are unordered collections of scalar values indexed by their associated string key. Values are usually referred to by name, or through a named reference. The first character of the name tells you to what sort of data structure it refers. The rest of the name tells you the particular value to which it refers. Usually this name is a single I<identifier>, that is, a string beginning with a letter or underscore, and containing letters, underscores, and digits. In some cases, it may be a chain of identifiers, separated by C<::> (or by the slightly archaic C<'>); all but the last are interpreted as names of packages, to locate the namespace in which to look up the final identifier (see L<perlmod/Packages> for details). For a more in-depth discussion on identifiers, see L</Identifier parsing>. It's possible to substitute for a simple identifier, an expression that produces a reference to the value at runtime. This is described in more detail below and in L<perlref>. X<identifier> Perl also has its own built-in variables whose names don't follow these rules. They have strange names so they don't accidentally collide with one of your normal variables. Strings that match parenthesized parts of a regular expression are saved under names containing only digits after the C<$> (see L<perlop> and L<perlre>). In addition, several special variables that provide windows into the inner working of Perl have names containing punctuation characters. These are documented in L<perlvar>. X<variable, built-in> Scalar values are always named with '$', even when referring to a scalar that is part of an array or a hash. The '$' symbol works semantically like the English word "the" in that it indicates a single value is expected. X<scalar> $days # the simple scalar value "days" $days[28] # the 29th element of array @days $days{'Feb'} # the 'Feb' value from hash %days $#days # the last index of array @days Entire arrays (and slices of arrays and hashes) are denoted by '@', which works much as the word "these" or "those" does in English, in that it indicates multiple values are expected. X<array> @days # ($days[0], $days[1],... $days[n]) @days[3,4,5] # same as ($days[3],$days[4],$days[5]) @days{'a','c'} # same as ($days{'a'},$days{'c'}) Entire hashes are denoted by '%': X<hash> %days # (key1, val1, key2, val2 ...) In addition, subroutines are named with an initial '&', though this is optional when unambiguous, just as the word "do" is often redundant in English. Symbol table entries can be named with an initial '*', but you don't really care about that yet (if ever :-). Every variable type has its own namespace, as do several non-variable identifiers. This means that you can, without fear of conflict, use the same name for a scalar variable, an array, or a hash--or, for that matter, for a filehandle, a directory handle, a subroutine name, a format name, or a label. This means that $foo and @foo are two different variables. It also means that C<$foo[1]> is a part of @foo, not a part of $foo. This may seem a bit weird, but that's okay, because it is weird. X<namespace> Because variable references always start with '$', '@', or '%', the "reserved" words aren't in fact reserved with respect to variable names. They I<are> reserved with respect to labels and filehandles, however, which don't have an initial special character. You can't have a filehandle named "log", for instance. Hint: you could say C<open(LOG,'logfile')> rather than C<open(log,'logfile')>. Using uppercase filehandles also improves readability and protects you from conflict with future reserved words. Case I<is> significant--"FOO", "Foo", and "foo" are all different names. Names that start with a letter or underscore may also contain digits and underscores. X<identifier, case sensitivity> X<case> It is possible to replace such an alphanumeric name with an expression that returns a reference to the appropriate type. For a description of this, see L<perlref>. Names that start with a digit may contain only more digits. Names that do not start with a letter, underscore, digit or a caret are limited to one character, e.g., C<$%> or C<$$>. (Most of these one character names have a predefined significance to Perl. For instance, C<$$> is the current process id. And all such names are reserved for Perl's possible use.) =head2 Identifier parsing X<identifiers> Up until Perl 5.18, the actual rules of what a valid identifier was were a bit fuzzy. However, in general, anything defined here should work on previous versions of Perl, while the opposite -- edge cases that work in previous versions, but aren't defined here -- probably won't work on newer versions. As an important side note, please note that the following only applies to bareword identifiers as found in Perl source code, not identifiers introduced through symbolic references, which have much fewer restrictions. If working under the effect of the C<use utf8;> pragma, the following rules apply: / (?[ ( \p{Word} & \p{XID_Start} ) + [_] ]) (?[ ( \p{Word} & \p{XID_Continue} ) ]) * /x That is, a "start" character followed by any number of "continue" characters. Perl requires every character in an identifier to also match C<\w> (this prevents some problematic cases); and Perl additionally accepts identfier names beginning with an underscore. If not under C<use utf8>, the source is treated as ASCII + 128 extra generic characters, and identifiers should match / (?aa) (?!\d) \w+ /x That is, any word character in the ASCII range, as long as the first character is not a digit. There are two package separators in Perl: A double colon (C<::>) and a single quote (C<'>). Normal identifiers can start or end with a double colon, and can contain several parts delimited by double colons. Single quotes have similar rules, but with the exception that they are not legal at the end of an identifier: That is, C<$'foo> and C<$foo'bar> are legal, but C<$foo'bar'> is not. Additionally, if the identifier is preceded by a sigil -- that is, if the identifier is part of a variable name -- it may optionally be enclosed in braces. While you can mix double colons with singles quotes, the quotes must come after the colons: C<$::::'foo> and C<$foo::'bar> are legal, but C<$::'::foo> and C<$foo'::bar> are not. Put together, a grammar to match a basic identifier becomes / (?(DEFINE) (?<variable> (?&sigil) (?: (?&normal_identifier) | \{ \s* (?&normal_identifier) \s* \} ) ) (?<normal_identifier> (?: :: )* '? (?&basic_identifier) (?: (?= (?: :: )+ '? | (?: :: )* ' ) (?&normal_identifier) )? (?: :: )* ) (?<basic_identifier> # is use utf8 on? (?(?{ (caller(0))[8] & $utf8::hint_bits }) (?&Perl_XIDS) (?&Perl_XIDC)* | (?aa) (?!\d) \w+ ) ) (?<sigil> [&*\$\@\%]) (?<Perl_XIDS> (?[ ( \p{Word} & \p{XID_Start} ) + [_] ]) ) (?<Perl_XIDC> (?[ \p{Word} & \p{XID_Continue} ]) ) ) /x Meanwhile, special identifiers don't follow the above rules; For the most part, all of the identifiers in this category have a special meaning given by Perl. Because they have special parsing rules, these generally can't be fully-qualified. They come in six forms (but don't use forms 5 and 6): =over =item 1. A sigil, followed solely by digits matching C<\p{POSIX_Digit}>, like C<$0>, C<$1>, or C<$10000>. =item 2. A sigil followed by a single character matching the C<\p{POSIX_Punct}> property, like C<$!> or C<%+>, except the character C<"{"> doesn't work. =item 3. A sigil, followed by a caret and any one of the characters C<[][A-Z^_?\]>, like C<$^V> or C<$^]>. =item 4. Similar to the above, a sigil, followed by bareword text in braces, where the first character is a caret. The next character is any one of the characters C<[][A-Z^_?\]>, followed by ASCII word characters. An example is C<${^GLOBAL_PHASE}>. =item 5. A sigil, followed by any single character in the range C<[\xA1-\xAC\xAE-\xFF]> when not under C<S<"use utf8">>. (Under C<S<"use utf8">>, the normal identifier rules given earlier in this section apply.) Use of non-graphic characters (the C1 controls, the NO-BREAK SPACE, and the SOFT HYPHEN) has been disallowed since v5.26.0. The use of the other characters is unwise, as these are all reserved to have special meaning to Perl, and none of them currently do have special meaning, though this could change without notice. Note that an implication of this form is that there are identifiers only legal under C<S<"use utf8">>, and vice-versa, for example the identifier C<$E<233>tat> is legal under C<S<"use utf8">>, but is otherwise considered to be the single character variable C<$E<233>> followed by the bareword C<"tat">, the combination of which is a syntax error. =item 6. This is a combination of the previous two forms. It is valid only when not under S<C<"use utf8">> (normal identifier rules apply when under S<C<"use utf8">>). The form is a sigil, followed by text in braces, where the first character is any one of the characters in the range C<[\x80-\xFF]> followed by ASCII word characters up to the trailing brace. The same caveats as the previous form apply: The non-graphic characters are no longer allowed with S<"use utf8">, it is unwise to use this form at all, and utf8ness makes a big difference. =back Prior to Perl v5.24, non-graphical ASCII control characters were also allowed in some situations; this had been deprecated since v5.20. =head2 Context X<context> X<scalar context> X<list context> The interpretation of operations and values in Perl sometimes depends on the requirements of the context around the operation or value. There are two major contexts: list and scalar. Certain operations return list values in contexts wanting a list, and scalar values otherwise. If this is true of an operation it will be mentioned in the documentation for that operation. In other words, Perl overloads certain operations based on whether the expected return value is singular or plural. Some words in English work this way, like "fish" and "sheep". In a reciprocal fashion, an operation provides either a scalar or a list context to each of its arguments. For example, if you say int( <STDIN> ) the integer operation provides scalar context for the <> operator, which responds by reading one line from STDIN and passing it back to the integer operation, which will then find the integer value of that line and return that. If, on the other hand, you say sort( <STDIN> ) then the sort operation provides list context for <>, which will proceed to read every line available up to the end of file, and pass that list of lines back to the sort routine, which will then sort those lines and return them as a list to whatever the context of the sort was. Assignment is a little bit special in that it uses its left argument to determine the context for the right argument. Assignment to a scalar evaluates the right-hand side in scalar context, while assignment to an array or hash evaluates the righthand side in list context. Assignment to a list (or slice, which is just a list anyway) also evaluates the right-hand side in list context. When you use the C<use warnings> pragma or Perl's B<-w> command-line option, you may see warnings about useless uses of constants or functions in "void context". Void context just means the value has been discarded, such as a statement containing only C<"fred";> or C<getpwuid(0);>. It still counts as scalar context for functions that care whether or not they're being called in list context. User-defined subroutines may choose to care whether they are being called in a void, scalar, or list context. Most subroutines do not need to bother, though. That's because both scalars and lists are automatically interpolated into lists. See L<perlfunc/wantarray> for how you would dynamically discern your function's calling context. =head2 Scalar values X<scalar> X<number> X<string> X<reference> All data in Perl is a scalar, an array of scalars, or a hash of scalars. A scalar may contain one single value in any of three different flavors: a number, a string, or a reference. In general, conversion from one form to another is transparent. Although a scalar may not directly hold multiple values, it may contain a reference to an array or hash which in turn contains multiple values. Scalars aren't necessarily one thing or another. There's no place to declare a scalar variable to be of type "string", type "number", type "reference", or anything else. Because of the automatic conversion of scalars, operations that return scalars don't need to care (and in fact, cannot care) whether their caller is looking for a string, a number, or a reference. Perl is a contextually polymorphic language whose scalars can be strings, numbers, or references (which includes objects). Although strings and numbers are considered pretty much the same thing for nearly all purposes, references are strongly-typed, uncastable pointers with builtin reference-counting and destructor invocation. X<truth> X<falsehood> X<true> X<false> X<!> X<not> X<negation> X<0> X<boolean> X<bool> A scalar value is interpreted as FALSE in the Boolean sense if it is undefined, the null string or the number 0 (or its string equivalent, "0"), and TRUE if it is anything else. The Boolean context is just a special kind of scalar context where no conversion to a string or a number is ever performed. Negation of a true value by C<!> or C<not> returns a special false value. When evaluated as a string it is treated as C<"">, but as a number, it is treated as 0. Most Perl operators that return true or false behave this way. There are actually two varieties of null strings (sometimes referred to as "empty" strings), a defined one and an undefined one. The defined version is just a string of length zero, such as C<"">. The undefined version is the value that indicates that there is no real value for something, such as when there was an error, or at end of file, or when you refer to an uninitialized variable or element of an array or hash. Although in early versions of Perl, an undefined scalar could become defined when first used in a place expecting a defined value, this no longer happens except for rare cases of autovivification as explained in L<perlref>. You can use the defined() operator to determine whether a scalar value is defined (this has no meaning on arrays or hashes), and the undef() operator to produce an undefined value. X<defined> X<undefined> X<undef> X<null> X<string, null> To find out whether a given string is a valid non-zero number, it's sometimes enough to test it against both numeric 0 and also lexical "0" (although this will cause noises if warnings are on). That's because strings that aren't numbers count as 0, just as they do in B<awk>: if ($str == 0 && $str ne "0") { warn "That doesn't look like a number"; } That method may be best because otherwise you won't treat IEEE notations like C<NaN> or C<Infinity> properly. At other times, you might prefer to determine whether string data can be used numerically by calling the POSIX::strtod() function or by inspecting your string with a regular expression (as documented in L<perlre>). warn "has nondigits" if /\D/; warn "not a natural number" unless /^\d+$/; # rejects -3 warn "not an integer" unless /^-?\d+$/; # rejects +3 warn "not an integer" unless /^[+-]?\d+$/; warn "not a decimal number" unless /^-?\d+\.?\d*$/; # rejects .2 warn "not a decimal number" unless /^-?(?:\d+(?:\.\d*)?|\.\d+)$/; warn "not a C float" unless /^([+-]?)(?=\d|\.\d)\d*(\.\d*)?([Ee]([+-]?\d+))?$/; The length of an array is a scalar value. You may find the length of array @days by evaluating C<$#days>, as in B<csh>. However, this isn't the length of the array; it's the subscript of the last element, which is a different value since there is ordinarily a 0th element. Assigning to C<$#days> actually changes the length of the array. Shortening an array this way destroys intervening values. Lengthening an array that was previously shortened does not recover values that were in those elements. X<$#> X<array, length> You can also gain some minuscule measure of efficiency by pre-extending an array that is going to get big. You can also extend an array by assigning to an element that is off the end of the array. You can truncate an array down to nothing by assigning the null list () to it. The following are equivalent: @whatever = (); $#whatever = -1; If you evaluate an array in scalar context, it returns the length of the array. (Note that this is not true of lists, which return the last value, like the C comma operator, nor of built-in functions, which return whatever they feel like returning.) The following is always true: X<array, length> scalar(@whatever) == $#whatever + 1; Some programmers choose to use an explicit conversion so as to leave nothing to doubt: $element_count = scalar(@whatever); If you evaluate a hash in scalar context, it returns a false value if the hash is empty. If there are any key/value pairs, it returns a true value. A more precise definition is version dependent. Prior to Perl 5.25 the value returned was a string consisting of the number of used buckets and the number of allocated buckets, separated by a slash. This is pretty much useful only to find out whether Perl's internal hashing algorithm is performing poorly on your data set. For example, you stick 10,000 things in a hash, but evaluating %HASH in scalar context reveals C<"1/16">, which means only one out of sixteen buckets has been touched, and presumably contains all 10,000 of your items. This isn't supposed to happen. As of Perl 5.25 the return was changed to be the count of keys in the hash. If you need access to the old behavior you can use C<Hash::Util::bucket_ratio()> instead. If a tied hash is evaluated in scalar context, the C<SCALAR> method is called (with a fallback to C<FIRSTKEY>). X<hash, scalar context> X<hash, bucket> X<bucket> You can preallocate space for a hash by assigning to the keys() function. This rounds up the allocated buckets to the next power of two: keys(%users) = 1000; # allocate 1024 buckets =head2 Scalar value constructors X<scalar, literal> X<scalar, constant> Numeric literals are specified in any of the following floating point or integer formats: 12345 12345.67 .23E-10 # a very small number 3.14_15_92 # a very important number 4_294_967_296 # underscore for legibility 0xff # hex 0xdead_beef # more hex 0377 # octal (only numbers, begins with 0) 0b011011 # binary 0x1.999ap-4 # hexadecimal floating point (the 'p' is required) You are allowed to use underscores (underbars) in numeric literals between digits for legibility (but not multiple underscores in a row: C<23__500> is not legal; C<23_500> is). You could, for example, group binary digits by threes (as for a Unix-style mode argument such as 0b110_100_100) or by fours (to represent nibbles, as in 0b1010_0110) or in other groups. X<number, literal> String literals are usually delimited by either single or double quotes. They work much like quotes in the standard Unix shells: double-quoted string literals are subject to backslash and variable substitution; single-quoted strings are not (except for C<\'> and C<\\>). The usual C-style backslash rules apply for making characters such as newline, tab, etc., as well as some more exotic forms. See L<perlop/"Quote and Quote-like Operators"> for a list. X<string, literal> Hexadecimal, octal, or binary, representations in string literals (e.g. '0xff') are not automatically converted to their integer representation. The hex() and oct() functions make these conversions for you. See L<perlfunc/hex> and L<perlfunc/oct> for more details. Hexadecimal floating point can start just like a hexadecimal literal, and it can be followed by an optional fractional hexadecimal part, but it must be followed by C<p>, an optional sign, and a power of two. The format is useful for accurately presenting floating point values, avoiding conversions to or from decimal floating point, and therefore avoiding possible loss in precision. Notice that while most current platforms use the 64-bit IEEE 754 floating point, not all do. Another potential source of (low-order) differences are the floating point rounding modes, which can differ between CPUs, operating systems, and compilers, and which Perl doesn't control. You can also embed newlines directly in your strings, i.e., they can end on a different line than they begin. This is nice, but if you forget your trailing quote, the error will not be reported until Perl finds another line containing the quote character, which may be much further on in the script. Variable substitution inside strings is limited to scalar variables, arrays, and array or hash slices. (In other words, names beginning with $ or @, followed by an optional bracketed expression as a subscript.) The following code segment prints out "The price is $Z<>100." X<interpolation> $Price = '$100'; # not interpolated print "The price is $Price.\n"; # interpolated There is no double interpolation in Perl, so the C<$100> is left as is. By default floating point numbers substituted inside strings use the dot (".") as the decimal separator. If C<use locale> is in effect, and POSIX::setlocale() has been called, the character used for the decimal separator is affected by the LC_NUMERIC locale. See L<perllocale> and L<POSIX>. As in some shells, you can enclose the variable name in braces to disambiguate it from following alphanumerics (and underscores). You must also do this when interpolating a variable into a string to separate the variable name from a following double-colon or an apostrophe, since these would be otherwise treated as a package separator: X<interpolation> $who = "Larry"; print PASSWD "${who}::0:0:Superuser:/:/bin/perl\n"; print "We use ${who}speak when ${who}'s here.\n"; Without the braces, Perl would have looked for a $whospeak, a C<$who::0>, and a C<$who's> variable. The last two would be the $0 and the $s variables in the (presumably) non-existent package C<who>. In fact, a simple identifier within such curlies is forced to be a string, and likewise within a hash subscript. Neither need quoting. Our earlier example, C<$days{'Feb'}> can be written as C<$days{Feb}> and the quotes will be assumed automatically. But anything more complicated in the subscript will be interpreted as an expression. This means for example that C<$version{2.0}++> is equivalent to C<$version{2}++>, not to C<$version{'2.0'}++>. =head3 Special floating point: infinity (Inf) and not-a-number (NaN) Floating point values include the special values C<Inf> and C<NaN>, for infinity and not-a-number. The infinity can be also negative. The infinity is the result of certain math operations that overflow the floating point range, like 9**9**9. The not-a-number is the result when the result is undefined or unrepresentable. Though note that you cannot get C<NaN> from some common "undefined" or "out-of-range" operations like dividing by zero, or square root of a negative number, since Perl generates fatal errors for those. The infinity and not-a-number have their own special arithmetic rules. The general rule is that they are "contagious": C<Inf> plus one is C<Inf>, and C<NaN> plus one is C<NaN>. Where things get interesting is when you combine infinities and not-a-numbers: C<Inf> minus C<Inf> and C<Inf> divided by C<Inf> are C<NaN> (while C<Inf> plus C<Inf> is C<Inf> and C<Inf> times C<Inf> is C<Inf>). C<NaN> is also curious in that it does not equal any number, I<including> itself: C<NaN> != C<NaN>. Perl doesn't understand C<Inf> and C<NaN> as numeric literals, but you can have them as strings, and Perl will convert them as needed: "Inf" + 1. (You can, however, import them from the POSIX extension; C<use POSIX qw(Inf NaN);> and then use them as literals.) Note that on input (string to number) Perl accepts C<Inf> and C<NaN> in many forms. Case is ignored, and the Win32-specific forms like C<1.#INF> are understood, but on output the values are normalized to C<Inf> and C<NaN>. =head3 Version Strings X<version string> X<vstring> X<v-string> A literal of the form C<v1.20.300.4000> is parsed as a string composed of characters with the specified ordinals. This form, known as v-strings, provides an alternative, more readable way to construct strings, rather than use the somewhat less readable interpolation form C<"\x{1}\x{14}\x{12c}\x{fa0}">. This is useful for representing Unicode strings, and for comparing version "numbers" using the string comparison operators, C<cmp>, C<gt>, C<lt> etc. If there are two or more dots in the literal, the leading C<v> may be omitted. print v9786; # prints SMILEY, "\x{263a}" print v102.111.111; # prints "foo" print 102.111.111; # same Such literals are accepted by both C<require> and C<use> for doing a version check. Note that using the v-strings for IPv4 addresses is not portable unless you also use the inet_aton()/inet_ntoa() routines of the Socket package. Note that since Perl 5.8.1 the single-number v-strings (like C<v65>) are not v-strings before the C<< => >> operator (which is usually used to separate a hash key from a hash value); instead they are interpreted as literal strings ('v65'). They were v-strings from Perl 5.6.0 to Perl 5.8.0, but that caused more confusion and breakage than good. Multi-number v-strings like C<v65.66> and C<65.66.67> continue to be v-strings always. =head3 Special Literals X<special literal> X<__END__> X<__DATA__> X<END> X<DATA> X<end> X<data> X<^D> X<^Z> The special literals __FILE__, __LINE__, and __PACKAGE__ represent the current filename, line number, and package name at that point in your program. __SUB__ gives a reference to the current subroutine. They may be used only as separate tokens; they will not be interpolated into strings. If there is no current package (due to an empty C<package;> directive), __PACKAGE__ is the undefined value. (But the empty C<package;> is no longer supported, as of version 5.10.) Outside of a subroutine, __SUB__ is the undefined value. __SUB__ is only available in 5.16 or higher, and only with a C<use v5.16> or C<use feature "current_sub"> declaration. X<__FILE__> X<__LINE__> X<__PACKAGE__> X<__SUB__> X<line> X<file> X<package> The two control characters ^D and ^Z, and the tokens __END__ and __DATA__ may be used to indicate the logical end of the script before the actual end of file. Any following text is ignored. Text after __DATA__ may be read via the filehandle C<PACKNAME::DATA>, where C<PACKNAME> is the package that was current when the __DATA__ token was encountered. The filehandle is left open pointing to the line after __DATA__. The program should C<close DATA> when it is done reading from it. (Leaving it open leaks filehandles if the module is reloaded for any reason, so it's a safer practice to close it.) For compatibility with older scripts written before __DATA__ was introduced, __END__ behaves like __DATA__ in the top level script (but not in files loaded with C<require> or C<do>) and leaves the remaining contents of the file accessible via C<main::DATA>. The C<DATA> file handle by default has whatever PerlIO layers were in place when Perl read the file to parse the source. Normally that means that the file is being read bytewise, as if it were encoded in Latin-1, but there are two major ways for it to be otherwise. Firstly, if the C<__END__>/C<__DATA__> token is in the scope of a C<use utf8> pragma then the C<DATA> handle will be in UTF-8 mode. And secondly, if the source is being read from perl's standard input then the C<DATA> file handle is actually aliased to the C<STDIN> file handle, and may be in UTF-8 mode because of the C<PERL_UNICODE> environment variable or perl's command-line switches. See L<SelfLoader> for more description of __DATA__, and an example of its use. Note that you cannot read from the DATA filehandle in a BEGIN block: the BEGIN block is executed as soon as it is seen (during compilation), at which point the corresponding __DATA__ (or __END__) token has not yet been seen. =head3 Barewords X<bareword> A word that has no other interpretation in the grammar will be treated as if it were a quoted string. These are known as "barewords". As with filehandles and labels, a bareword that consists entirely of lowercase letters risks conflict with future reserved words, and if you use the C<use warnings> pragma or the B<-w> switch, Perl will warn you about any such words. Perl limits barewords (like identifiers) to about 250 characters. Future versions of Perl are likely to eliminate these arbitrary limitations. Some people may wish to outlaw barewords entirely. If you say use strict 'subs'; then any bareword that would NOT be interpreted as a subroutine call produces a compile-time error instead. The restriction lasts to the end of the enclosing block. An inner block may countermand this by saying C<no strict 'subs'>. =head3 Array Interpolation X<array, interpolation> X<interpolation, array> X<$"> Arrays and slices are interpolated into double-quoted strings by joining the elements with the delimiter specified in the C<$"> variable (C<$LIST_SEPARATOR> if "use English;" is specified), space by default. The following are equivalent: $temp = join($", @ARGV); system "echo $temp"; system "echo @ARGV"; Within search patterns (which also undergo double-quotish substitution) there is an unfortunate ambiguity: Is C</$foo[bar]/> to be interpreted as C</${foo}[bar]/> (where C<[bar]> is a character class for the regular expression) or as C</${foo[bar]}/> (where C<[bar]> is the subscript to array @foo)? If @foo doesn't otherwise exist, then it's obviously a character class. If @foo exists, Perl takes a good guess about C<[bar]>, and is almost always right. If it does guess wrong, or if you're just plain paranoid, you can force the correct interpretation with curly braces as above. If you're looking for the information on how to use here-documents, which used to be here, that's been moved to L<perlop/Quote and Quote-like Operators>. =head2 List value constructors X<list> List values are denoted by separating individual values by commas (and enclosing the list in parentheses where precedence requires it): (LIST) In a context not requiring a list value, the value of what appears to be a list literal is simply the value of the final element, as with the C comma operator. For example, @foo = ('cc', '-E', $bar); assigns the entire list value to array @foo, but $foo = ('cc', '-E', $bar); assigns the value of variable $bar to the scalar variable $foo. Note that the value of an actual array in scalar context is the length of the array; the following assigns the value 3 to $foo: @foo = ('cc', '-E', $bar); $foo = @foo; # $foo gets 3 You may have an optional comma before the closing parenthesis of a list literal, so that you can say: @foo = ( 1, 2, 3, ); To use a here-document to assign an array, one line per element, you might use an approach like this: @sauces = <<End_Lines =~ m/(\S.*\S)/g; normal tomato spicy tomato green chile pesto white wine End_Lines LISTs do automatic interpolation of sublists. That is, when a LIST is evaluated, each element of the list is evaluated in list context, and the resulting list value is interpolated into LIST just as if each individual element were a member of LIST. Thus arrays and hashes lose their identity in a LIST--the list (@foo,@bar,&SomeSub,%glarch) contains all the elements of @foo followed by all the elements of @bar, followed by all the elements returned by the subroutine named SomeSub called in list context, followed by the key/value pairs of %glarch. To make a list reference that does I<NOT> interpolate, see L<perlref>. The null list is represented by (). Interpolating it in a list has no effect. Thus ((),(),()) is equivalent to (). Similarly, interpolating an array with no elements is the same as if no array had been interpolated at that point. This interpolation combines with the facts that the opening and closing parentheses are optional (except when necessary for precedence) and lists may end with an optional comma to mean that multiple commas within lists are legal syntax. The list C<1,,3> is a concatenation of two lists, C<1,> and C<3>, the first of which ends with that optional comma. C<1,,3> is C<(1,),(3)> is C<1,3> (And similarly for C<1,,,3> is C<(1,),(,),3> is C<1,3> and so on.) Not that we'd advise you to use this obfuscation. A list value may also be subscripted like a normal array. You must put the list in parentheses to avoid ambiguity. For example: # Stat returns list value. $time = (stat($file))[8]; # SYNTAX ERROR HERE. $time = stat($file)[8]; # OOPS, FORGOT PARENTHESES # Find a hex digit. $hexdigit = ('a','b','c','d','e','f')[$digit-10]; # A "reverse comma operator". return (pop(@foo),pop(@foo))[0]; Lists may be assigned to only when each element of the list is itself legal to assign to: ($x, $y, $z) = (1, 2, 3); ($map{'red'}, $map{'blue'}, $map{'green'}) = (0x00f, 0x0f0, 0xf00); An exception to this is that you may assign to C<undef> in a list. This is useful for throwing away some of the return values of a function: ($dev, $ino, undef, undef, $uid, $gid) = stat($file); As of Perl 5.22, you can also use C<(undef)x2> instead of C<undef, undef>. (You can also do C<($x) x 2>, which is less useful, because it assigns to the same variable twice, clobbering the first value assigned.) When you assign a list of scalars to an array, all previous values in that array are wiped out and the number of elements in the array will now be equal to the number of elements in the right-hand list -- the list from which assignment was made. The array will automatically resize itself to precisely accommodate each element in the right-hand list. use warnings; my (@xyz, $x, $y, $z); @xyz = (1, 2, 3); print "@xyz\n"; # 1 2 3 @xyz = ('al', 'be', 'ga', 'de'); print "@xyz\n"; # al be ga de @xyz = (101, 102); print "@xyz\n"; # 101 102 When, however, you assign a list of scalars to another list of scalars, the results differ according to whether the left-hand list -- the list being assigned to -- has the same, more or fewer elements than the right-hand list. ($x, $y, $z) = (1, 2, 3); print "$x $y $z\n"; # 1 2 3 ($x, $y, $z) = ('al', 'be', 'ga', 'de'); print "$x $y $z\n"; # al be ga ($x, $y, $z) = (101, 102); print "$x $y $z\n"; # 101 102 # Use of uninitialized value $z in concatenation (.) # or string at [program] line [line number]. If the number of scalars in the left-hand list is less than that in the right-hand list, the "extra" scalars in the right-hand list will simply not be assigned. If the number of scalars in the left-hand list is greater than that in the left-hand list, the "missing" scalars will become undefined. ($x, $y, $z) = (101, 102); for my $el ($x, $y, $z) { (defined $el) ? print "$el " : print "<undef>"; } print "\n"; # 101 102 <undef> List assignment in scalar context returns the number of elements produced by the expression on the right side of the assignment: $x = (($foo,$bar) = (3,2,1)); # set $x to 3, not 2 $x = (($foo,$bar) = f()); # set $x to f()'s return count This is handy when you want to do a list assignment in a Boolean context, because most list functions return a null list when finished, which when assigned produces a 0, which is interpreted as FALSE. It's also the source of a useful idiom for executing a function or performing an operation in list context and then counting the number of return values, by assigning to an empty list and then using that assignment in scalar context. For example, this code: $count = () = $string =~ /\d+/g; will place into $count the number of digit groups found in $string. This happens because the pattern match is in list context (since it is being assigned to the empty list), and will therefore return a list of all matching parts of the string. The list assignment in scalar context will translate that into the number of elements (here, the number of times the pattern matched) and assign that to $count. Note that simply using $count = $string =~ /\d+/g; would not have worked, since a pattern match in scalar context will only return true or false, rather than a count of matches. The final element of a list assignment may be an array or a hash: ($x, $y, @rest) = split; my($x, $y, %rest) = @_; You can actually put an array or hash anywhere in the list, but the first one in the list will soak up all the values, and anything after it will become undefined. This may be useful in a my() or local(). A hash can be initialized using a literal list holding pairs of items to be interpreted as a key and a value: # same as map assignment above %map = ('red',0x00f,'blue',0x0f0,'green',0xf00); While literal lists and named arrays are often interchangeable, that's not the case for hashes. Just because you can subscript a list value like a normal array does not mean that you can subscript a list value as a hash. Likewise, hashes included as parts of other lists (including parameters lists and return lists from functions) always flatten out into key/value pairs. That's why it's good to use references sometimes. It is often more readable to use the C<< => >> operator between key/value pairs. The C<< => >> operator is mostly just a more visually distinctive synonym for a comma, but it also arranges for its left-hand operand to be interpreted as a string if it's a bareword that would be a legal simple identifier. C<< => >> doesn't quote compound identifiers, that contain double colons. This makes it nice for initializing hashes: %map = ( red => 0x00f, blue => 0x0f0, green => 0xf00, ); or for initializing hash references to be used as records: $rec = { witch => 'Mable the Merciless', cat => 'Fluffy the Ferocious', date => '10/31/1776', }; or for using call-by-named-parameter to complicated functions: $field = $query->radio_group( name => 'group_name', values => ['eenie','meenie','minie'], default => 'meenie', linebreak => 'true', labels => \%labels ); Note that just because a hash is initialized in that order doesn't mean that it comes out in that order. See L<perlfunc/sort> for examples of how to arrange for an output ordering. If a key appears more than once in the initializer list of a hash, the last occurrence wins: %circle = ( center => [5, 10], center => [27, 9], radius => 100, color => [0xDF, 0xFF, 0x00], radius => 54, ); # same as %circle = ( center => [27, 9], color => [0xDF, 0xFF, 0x00], radius => 54, ); This can be used to provide overridable configuration defaults: # values in %args take priority over %config_defaults %config = (%config_defaults, %args); =head2 Subscripts An array can be accessed one scalar at a time by specifying a dollar sign (C<$>), then the name of the array (without the leading C<@>), then the subscript inside square brackets. For example: @myarray = (5, 50, 500, 5000); print "The Third Element is", $myarray[2], "\n"; The array indices start with 0. A negative subscript retrieves its value from the end. In our example, C<$myarray[-1]> would have been 5000, and C<$myarray[-2]> would have been 500. Hash subscripts are similar, only instead of square brackets curly brackets are used. For example: %scientists = ( "Newton" => "Isaac", "Einstein" => "Albert", "Darwin" => "Charles", "Feynman" => "Richard", ); print "Darwin's First Name is ", $scientists{"Darwin"}, "\n"; You can also subscript a list to get a single element from it: $dir = (getpwnam("daemon"))[7]; =head2 Multi-dimensional array emulation Multidimensional arrays may be emulated by subscripting a hash with a list. The elements of the list are joined with the subscript separator (see L<perlvar/$;>). $foo{$x,$y,$z} is equivalent to $foo{join($;, $x, $y, $z)} The default subscript separator is "\034", the same as SUBSEP in B<awk>. =head2 Slices X<slice> X<array, slice> X<hash, slice> A slice accesses several elements of a list, an array, or a hash simultaneously using a list of subscripts. It's more convenient than writing out the individual elements as a list of separate scalar values. ($him, $her) = @folks[0,-1]; # array slice @them = @folks[0 .. 3]; # array slice ($who, $home) = @ENV{"USER", "HOME"}; # hash slice ($uid, $dir) = (getpwnam("daemon"))[2,7]; # list slice Since you can assign to a list of variables, you can also assign to an array or hash slice. @days[3..5] = qw/Wed Thu Fri/; @colors{'red','blue','green'} = (0xff0000, 0x0000ff, 0x00ff00); @folks[0, -1] = @folks[-1, 0]; The previous assignments are exactly equivalent to ($days[3], $days[4], $days[5]) = qw/Wed Thu Fri/; ($colors{'red'}, $colors{'blue'}, $colors{'green'}) = (0xff0000, 0x0000ff, 0x00ff00); ($folks[0], $folks[-1]) = ($folks[-1], $folks[0]); Since changing a slice changes the original array or hash that it's slicing, a C<foreach> construct will alter some--or even all--of the values of the array or hash. foreach (@array[ 4 .. 10 ]) { s/peter/paul/ } foreach (@hash{qw[key1 key2]}) { s/^\s+//; # trim leading whitespace s/\s+$//; # trim trailing whitespace s/(\w+)/\u\L$1/g; # "titlecase" words } As a special exception, when you slice a list (but not an array or a hash), if the list evaluates to empty, then taking a slice of that empty list will always yield the empty list in turn. Thus: @a = ()[0,1]; # @a has no elements @b = (@a)[0,1]; # @b has no elements @c = (sub{}->())[0,1]; # @c has no elements @d = ('a','b')[0,1]; # @d has two elements @e = (@d)[0,1,8,9]; # @e has four elements @f = (@d)[8,9]; # @f has two elements This makes it easy to write loops that terminate when a null list is returned: while ( ($home, $user) = (getpwent)[7,0] ) { printf "%-8s %s\n", $user, $home; } As noted earlier in this document, the scalar sense of list assignment is the number of elements on the right-hand side of the assignment. The null list contains no elements, so when the password file is exhausted, the result is 0, not 2. Slices in scalar context return the last item of the slice. @a = qw/first second third/; %h = (first => 'A', second => 'B'); $t = @a[0, 1]; # $t is now 'second' $u = @h{'first', 'second'}; # $u is now 'B' If you're confused about why you use an '@' there on a hash slice instead of a '%', think of it like this. The type of bracket (square or curly) governs whether it's an array or a hash being looked at. On the other hand, the leading symbol ('$' or '@') on the array or hash indicates whether you are getting back a singular value (a scalar) or a plural one (a list). =head3 Key/Value Hash Slices Starting in Perl 5.20, a hash slice operation with the % symbol is a variant of slice operation returning a list of key/value pairs rather than just values: %h = (blonk => 2, foo => 3, squink => 5, bar => 8); %subset = %h{'foo', 'bar'}; # key/value hash slice # %subset is now (foo => 3, bar => 8) %removed = delete %h{'foo', 'bar'}; # %removed is now (foo => 3, bar => 8) # %h is now (blonk => 2, squink => 5) However, the result of such a slice cannot be localized or assigned to. These are otherwise very much consistent with hash slices using the @ symbol. =head3 Index/Value Array Slices Similar to key/value hash slices (and also introduced in Perl 5.20), the % array slice syntax returns a list of index/value pairs: @a = "a".."z"; @list = %a[3,4,6]; # @list is now (3, "d", 4, "e", 6, "g") @removed = delete %a[3,4,6] # @removed is now (3, "d", 4, "e", 6, "g") # @list[3,4,6] are now undef Note that calling L<C<delete>|perlfunc/delete EXPR> on array values is strongly discouraged. =head2 Typeglobs and Filehandles X<typeglob> X<filehandle> X<*> Perl uses an internal type called a I<typeglob> to hold an entire symbol table entry. The type prefix of a typeglob is a C<*>, because it represents all types. This used to be the preferred way to pass arrays and hashes by reference into a function, but now that we have real references, this is seldom needed. The main use of typeglobs in modern Perl is create symbol table aliases. This assignment: *this = *that; makes $this an alias for $that, @this an alias for @that, %this an alias for %that, &this an alias for &that, etc. Much safer is to use a reference. This: local *Here::blue = \$There::green; temporarily makes $Here::blue an alias for $There::green, but doesn't make @Here::blue an alias for @There::green, or %Here::blue an alias for %There::green, etc. See L<perlmod/"Symbol Tables"> for more examples of this. Strange though this may seem, this is the basis for the whole module import/export system. Another use for typeglobs is to pass filehandles into a function or to create new filehandles. If you need to use a typeglob to save away a filehandle, do it this way: $fh = *STDOUT; or perhaps as a real reference, like this: $fh = \*STDOUT; See L<perlsub> for examples of using these as indirect filehandles in functions. Typeglobs are also a way to create a local filehandle using the local() operator. These last until their block is exited, but may be passed back. For example: sub newopen { my $path = shift; local *FH; # not my! open (FH, $path) or return undef; return *FH; } $fh = newopen('/etc/passwd'); Now that we have the C<*foo{THING}> notation, typeglobs aren't used as much for filehandle manipulations, although they're still needed to pass brand new file and directory handles into or out of functions. That's because C<*HANDLE{IO}> only works if HANDLE has already been used as a handle. In other words, C<*FH> must be used to create new symbol table entries; C<*foo{THING}> cannot. When in doubt, use C<*FH>. All functions that are capable of creating filehandles (open(), opendir(), pipe(), socketpair(), sysopen(), socket(), and accept()) automatically create an anonymous filehandle if the handle passed to them is an uninitialized scalar variable. This allows the constructs such as C<open(my $fh, ...)> and C<open(local $fh,...)> to be used to create filehandles that will conveniently be closed automatically when the scope ends, provided there are no other references to them. This largely eliminates the need for typeglobs when opening filehandles that must be passed around, as in the following example: sub myopen { open my $fh, "@_" or die "Can't open '@_': $!"; return $fh; } { my $f = myopen("</etc/motd"); print <$f>; # $f implicitly closed here } Note that if an initialized scalar variable is used instead the result is different: C<my $fh='zzz'; open($fh, ...)> is equivalent to C<open( *{'zzz'}, ...)>. C<use strict 'refs'> forbids such practice. Another way to create anonymous filehandles is with the Symbol module or with the IO::Handle module and its ilk. These modules have the advantage of not hiding different types of the same name during the local(). See the bottom of L<perlfunc/open> for an example. =head1 SEE ALSO See L<perlvar> for a description of Perl's built-in variables and a discussion of legal variable names. See L<perlref>, L<perlsub>, and L<perlmod/"Symbol Tables"> for more discussion on typeglobs and the C<*foo{THING}> syntax. perlmodstyle.pod 0000644 00000054074 15125556335 0010017 0 ustar 00 =head1 NAME perlmodstyle - Perl module style guide =head1 INTRODUCTION This document attempts to describe the Perl Community's "best practice" for writing Perl modules. It extends the recommendations found in L<perlstyle> , which should be considered required reading before reading this document. While this document is intended to be useful to all module authors, it is particularly aimed at authors who wish to publish their modules on CPAN. The focus is on elements of style which are visible to the users of a module, rather than those parts which are only seen by the module's developers. However, many of the guidelines presented in this document can be extrapolated and applied successfully to a module's internals. This document differs from L<perlnewmod> in that it is a style guide rather than a tutorial on creating CPAN modules. It provides a checklist against which modules can be compared to determine whether they conform to best practice, without necessarily describing in detail how to achieve this. All the advice contained in this document has been gleaned from extensive conversations with experienced CPAN authors and users. Every piece of advice given here is the result of previous mistakes. This information is here to help you avoid the same mistakes and the extra work that would inevitably be required to fix them. The first section of this document provides an itemized checklist; subsequent sections provide a more detailed discussion of the items on the list. The final section, "Common Pitfalls", describes some of the most popular mistakes made by CPAN authors. =head1 QUICK CHECKLIST For more detail on each item in this checklist, see below. =head2 Before you start =over 4 =item * Don't re-invent the wheel =item * Patch, extend or subclass an existing module where possible =item * Do one thing and do it well =item * Choose an appropriate name =item * Get feedback before publishing =back =head2 The API =over 4 =item * API should be understandable by the average programmer =item * Simple methods for simple tasks =item * Separate functionality from output =item * Consistent naming of subroutines or methods =item * Use named parameters (a hash or hashref) when there are more than two parameters =back =head2 Stability =over 4 =item * Ensure your module works under C<use strict> and C<-w> =item * Stable modules should maintain backwards compatibility =back =head2 Documentation =over 4 =item * Write documentation in POD =item * Document purpose, scope and target applications =item * Document each publically accessible method or subroutine, including params and return values =item * Give examples of use in your documentation =item * Provide a README file and perhaps also release notes, changelog, etc =item * Provide links to further information (URL, email) =back =head2 Release considerations =over 4 =item * Specify pre-requisites in Makefile.PL or Build.PL =item * Specify Perl version requirements with C<use> =item * Include tests with your module =item * Choose a sensible and consistent version numbering scheme (X.YY is the common Perl module numbering scheme) =item * Increment the version number for every change, no matter how small =item * Package the module using "make dist" =item * Choose an appropriate license (GPL/Artistic is a good default) =back =head1 BEFORE YOU START WRITING A MODULE Try not to launch headlong into developing your module without spending some time thinking first. A little forethought may save you a vast amount of effort later on. =head2 Has it been done before? You may not even need to write the module. Check whether it's already been done in Perl, and avoid re-inventing the wheel unless you have a good reason. Good places to look for pre-existing modules include L<MetaCPAN|https://metacpan.org> and L<PrePAN|http://prepan.org> and asking on C<module-authors@perl.org> (L<https://lists.perl.org/list/module-authors.html>). If an existing module B<almost> does what you want, consider writing a patch, writing a subclass, or otherwise extending the existing module rather than rewriting it. =head2 Do one thing and do it well At the risk of stating the obvious, modules are intended to be modular. A Perl developer should be able to use modules to put together the building blocks of their application. However, it's important that the blocks are the right shape, and that the developer shouldn't have to use a big block when all they need is a small one. Your module should have a clearly defined scope which is no longer than a single sentence. Can your module be broken down into a family of related modules? Bad example: "FooBar.pm provides an implementation of the FOO protocol and the related BAR standard." Good example: "Foo.pm provides an implementation of the FOO protocol. Bar.pm implements the related BAR protocol." This means that if a developer only needs a module for the BAR standard, they should not be forced to install libraries for FOO as well. =head2 What's in a name? Make sure you choose an appropriate name for your module early on. This will help people find and remember your module, and make programming with your module more intuitive. When naming your module, consider the following: =over 4 =item * Be descriptive (i.e. accurately describes the purpose of the module). =item * Be consistent with existing modules. =item * Reflect the functionality of the module, not the implementation. =item * Avoid starting a new top-level hierarchy, especially if a suitable hierarchy already exists under which you could place your module. =back =head2 Get feedback before publishing If you have never uploaded a module to CPAN before (and even if you have), you are strongly encouraged to get feedback on L<PrePAN|http://prepan.org>. PrePAN is a site dedicated to discussing ideas for CPAN modules with other Perl developers and is a great resource for new (and experienced) Perl developers. You should also try to get feedback from people who are already familiar with the module's application domain and the CPAN naming system. Authors of similar modules, or modules with similar names, may be a good place to start, as are community sites like L<Perl Monks|https://www.perlmonks.org>. =head1 DESIGNING AND WRITING YOUR MODULE Considerations for module design and coding: =head2 To OO or not to OO? Your module may be object oriented (OO) or not, or it may have both kinds of interfaces available. There are pros and cons of each technique, which should be considered when you design your API. In I<Perl Best Practices> (copyright 2004, Published by O'Reilly Media, Inc.), Damian Conway provides a list of criteria to use when deciding if OO is the right fit for your problem: =over 4 =item * The system being designed is large, or is likely to become large. =item * The data can be aggregated into obvious structures, especially if there's a large amount of data in each aggregate. =item * The various types of data aggregate form a natural hierarchy that facilitates the use of inheritance and polymorphism. =item * You have a piece of data on which many different operations are applied. =item * You need to perform the same general operations on related types of data, but with slight variations depending on the specific type of data the operations are applied to. =item * It's likely you'll have to add new data types later. =item * The typical interactions between pieces of data are best represented by operators. =item * The implementation of individual components of the system is likely to change over time. =item * The system design is already object-oriented. =item * Large numbers of other programmers will be using your code modules. =back Think carefully about whether OO is appropriate for your module. Gratuitous object orientation results in complex APIs which are difficult for the average module user to understand or use. =head2 Designing your API Your interfaces should be understandable by an average Perl programmer. The following guidelines may help you judge whether your API is sufficiently straightforward: =over 4 =item Write simple routines to do simple things. It's better to have numerous simple routines than a few monolithic ones. If your routine changes its behaviour significantly based on its arguments, it's a sign that you should have two (or more) separate routines. =item Separate functionality from output. Return your results in the most generic form possible and allow the user to choose how to use them. The most generic form possible is usually a Perl data structure which can then be used to generate a text report, HTML, XML, a database query, or whatever else your users require. If your routine iterates through some kind of list (such as a list of files, or records in a database) you may consider providing a callback so that users can manipulate each element of the list in turn. File::Find provides an example of this with its C<find(\&wanted, $dir)> syntax. =item Provide sensible shortcuts and defaults. Don't require every module user to jump through the same hoops to achieve a simple result. You can always include optional parameters or routines for more complex or non-standard behaviour. If most of your users have to type a few almost identical lines of code when they start using your module, it's a sign that you should have made that behaviour a default. Another good indicator that you should use defaults is if most of your users call your routines with the same arguments. =item Naming conventions Your naming should be consistent. For instance, it's better to have: display_day(); display_week(); display_year(); than display_day(); week_display(); show_year(); This applies equally to method names, parameter names, and anything else which is visible to the user (and most things that aren't!) =item Parameter passing Use named parameters. It's easier to use a hash like this: $obj->do_something( name => "wibble", type => "text", size => 1024, ); ... than to have a long list of unnamed parameters like this: $obj->do_something("wibble", "text", 1024); While the list of arguments might work fine for one, two or even three arguments, any more arguments become hard for the module user to remember, and hard for the module author to manage. If you want to add a new parameter you will have to add it to the end of the list for backward compatibility, and this will probably make your list order unintuitive. Also, if many elements may be undefined you may see the following unattractive method calls: $obj->do_something(undef, undef, undef, undef, undef, 1024); Provide sensible defaults for parameters which have them. Don't make your users specify parameters which will almost always be the same. The issue of whether to pass the arguments in a hash or a hashref is largely a matter of personal style. The use of hash keys starting with a hyphen (C<-name>) or entirely in upper case (C<NAME>) is a relic of older versions of Perl in which ordinary lower case strings were not handled correctly by the C<=E<gt>> operator. While some modules retain uppercase or hyphenated argument keys for historical reasons or as a matter of personal style, most new modules should use simple lower case keys. Whatever you choose, be consistent! =back =head2 Strictness and warnings Your module should run successfully under the strict pragma and should run without generating any warnings. Your module should also handle taint-checking where appropriate, though this can cause difficulties in many cases. =head2 Backwards compatibility Modules which are "stable" should not break backwards compatibility without at least a long transition phase and a major change in version number. =head2 Error handling and messages When your module encounters an error it should do one or more of: =over 4 =item * Return an undefined value. =item * set C<$Module::errstr> or similar (C<errstr> is a common name used by DBI and other popular modules; if you choose something else, be sure to document it clearly). =item * C<warn()> or C<carp()> a message to STDERR. =item * C<croak()> only when your module absolutely cannot figure out what to do. (C<croak()> is a better version of C<die()> for use within modules, which reports its errors from the perspective of the caller. See L<Carp> for details of C<croak()>, C<carp()> and other useful routines.) =item * As an alternative to the above, you may prefer to throw exceptions using the Error module. =back Configurable error handling can be very useful to your users. Consider offering a choice of levels for warning and debug messages, an option to send messages to a separate file, a way to specify an error-handling routine, or other such features. Be sure to default all these options to the commonest use. =head1 DOCUMENTING YOUR MODULE =head2 POD Your module should include documentation aimed at Perl developers. You should use Perl's "plain old documentation" (POD) for your general technical documentation, though you may wish to write additional documentation (white papers, tutorials, etc) in some other format. You need to cover the following subjects: =over 4 =item * A synopsis of the common uses of the module =item * The purpose, scope and target applications of your module =item * Use of each publically accessible method or subroutine, including parameters and return values =item * Examples of use =item * Sources of further information =item * A contact email address for the author/maintainer =back The level of detail in Perl module documentation generally goes from less detailed to more detailed. Your SYNOPSIS section should contain a minimal example of use (perhaps as little as one line of code; skip the unusual use cases or anything not needed by most users); the DESCRIPTION should describe your module in broad terms, generally in just a few paragraphs; more detail of the module's routines or methods, lengthy code examples, or other in-depth material should be given in subsequent sections. Ideally, someone who's slightly familiar with your module should be able to refresh their memory without hitting "page down". As your reader continues through the document, they should receive a progressively greater amount of knowledge. The recommended order of sections in Perl module documentation is: =over 4 =item * NAME =item * SYNOPSIS =item * DESCRIPTION =item * One or more sections or subsections giving greater detail of available methods and routines and any other relevant information. =item * BUGS/CAVEATS/etc =item * AUTHOR =item * SEE ALSO =item * COPYRIGHT and LICENSE =back Keep your documentation near the code it documents ("inline" documentation). Include POD for a given method right above that method's subroutine. This makes it easier to keep the documentation up to date, and avoids having to document each piece of code twice (once in POD and once in comments). =head2 README, INSTALL, release notes, changelogs Your module should also include a README file describing the module and giving pointers to further information (website, author email). An INSTALL file should be included, and should contain simple installation instructions. When using ExtUtils::MakeMaker this will usually be: =over 4 =item perl Makefile.PL =item make =item make test =item make install =back When using Module::Build, this will usually be: =over 4 =item perl Build.PL =item perl Build =item perl Build test =item perl Build install =back Release notes or changelogs should be produced for each release of your software describing user-visible changes to your module, in terms relevant to the user. Unless you have good reasons for using some other format (for example, a format used within your company), the convention is to name your changelog file C<Changes>, and to follow the simple format described in L<CPAN::Changes::Spec>. =head1 RELEASE CONSIDERATIONS =head2 Version numbering Version numbers should indicate at least major and minor releases, and possibly sub-minor releases. A major release is one in which most of the functionality has changed, or in which major new functionality is added. A minor release is one in which a small amount of functionality has been added or changed. Sub-minor version numbers are usually used for changes which do not affect functionality, such as documentation patches. The most common CPAN version numbering scheme looks like this: 1.00, 1.10, 1.11, 1.20, 1.30, 1.31, 1.32 A correct CPAN version number is a floating point number with at least 2 digits after the decimal. You can test whether it conforms to CPAN by using perl -MExtUtils::MakeMaker -le 'print MM->parse_version(shift)' \ 'Foo.pm' If you want to release a 'beta' or 'alpha' version of a module but don't want CPAN.pm to list it as most recent use an '_' after the regular version number followed by at least 2 digits, eg. 1.20_01. If you do this, the following idiom is recommended: our $VERSION = "1.12_01"; # so CPAN distribution will have # right filename our $XS_VERSION = $VERSION; # only needed if you have XS code $VERSION = eval $VERSION; # so "use Module 0.002" won't warn on # underscore With that trick MakeMaker will only read the first line and thus read the underscore, while the perl interpreter will evaluate the $VERSION and convert the string into a number. Later operations that treat $VERSION as a number will then be able to do so without provoking a warning about $VERSION not being a number. Never release anything (even a one-word documentation patch) without incrementing the number. Even a one-word documentation patch should result in a change in version at the sub-minor level. Once picked, it is important to stick to your version scheme, without reducing the number of digits. This is because "downstream" packagers, such as the FreeBSD ports system, interpret the version numbers in various ways. If you change the number of digits in your version scheme, you can confuse these systems so they get the versions of your module out of order, which is obviously bad. =head2 Pre-requisites Module authors should carefully consider whether to rely on other modules, and which modules to rely on. Most importantly, choose modules which are as stable as possible. In order of preference: =over 4 =item * Core Perl modules =item * Stable CPAN modules =item * Unstable CPAN modules =item * Modules not available from CPAN =back Specify version requirements for other Perl modules in the pre-requisites in your Makefile.PL or Build.PL. Be sure to specify Perl version requirements both in Makefile.PL or Build.PL and with C<require 5.6.1> or similar. See the section on C<use VERSION> of L<perlfunc/require> for details. =head2 Testing All modules should be tested before distribution (using "make disttest"), and the tests should also be available to people installing the modules (using "make test"). For Module::Build you would use the C<make test> equivalent C<perl Build test>. The importance of these tests is proportional to the alleged stability of a module. A module which purports to be stable or which hopes to achieve wide use should adhere to as strict a testing regime as possible. Useful modules to help you write tests (with minimum impact on your development process or your time) include Test::Simple, Carp::Assert and Test::Inline. For more sophisticated test suites there are Test::More and Test::MockObject. =head2 Packaging Modules should be packaged using one of the standard packaging tools. Currently you have the choice between ExtUtils::MakeMaker and the more platform independent Module::Build, allowing modules to be installed in a consistent manner. When using ExtUtils::MakeMaker, you can use "make dist" to create your package. Tools exist to help you to build your module in a MakeMaker-friendly style. These include ExtUtils::ModuleMaker and h2xs. See also L<perlnewmod>. =head2 Licensing Make sure that your module has a license, and that the full text of it is included in the distribution (unless it's a common one and the terms of the license don't require you to include it). If you don't know what license to use, dual licensing under the GPL and Artistic licenses (the same as Perl itself) is a good idea. See L<perlgpl> and L<perlartistic>. =head1 COMMON PITFALLS =head2 Reinventing the wheel There are certain application spaces which are already very, very well served by CPAN. One example is templating systems, another is date and time modules, and there are many more. While it is a rite of passage to write your own version of these things, please consider carefully whether the Perl world really needs you to publish it. =head2 Trying to do too much Your module will be part of a developer's toolkit. It will not, in itself, form the B<entire> toolkit. It's tempting to add extra features until your code is a monolithic system rather than a set of modular building blocks. =head2 Inappropriate documentation Don't fall into the trap of writing for the wrong audience. Your primary audience is a reasonably experienced developer with at least a moderate understanding of your module's application domain, who's just downloaded your module and wants to start using it as quickly as possible. Tutorials, end-user documentation, research papers, FAQs etc are not appropriate in a module's main documentation. If you really want to write these, include them as sub-documents such as C<My::Module::Tutorial> or C<My::Module::FAQ> and provide a link in the SEE ALSO section of the main documentation. =head1 SEE ALSO =over 4 =item L<perlstyle> General Perl style guide =item L<perlnewmod> How to create a new module =item L<perlpod> POD documentation =item L<podchecker> Verifies your POD's correctness =item Packaging Tools L<ExtUtils::MakeMaker>, L<Module::Build> =item Testing tools L<Test::Simple>, L<Test::Inline>, L<Carp::Assert>, L<Test::More>, L<Test::MockObject> =item L<https://pause.perl.org/> Perl Authors Upload Server. Contains links to information for module authors. =item Any good book on software engineering =back =head1 AUTHOR Kirrily "Skud" Robert <skud@cpan.org> perlrequick.pod 0000644 00000045305 15125556335 0007617 0 ustar 00 =head1 NAME perlrequick - Perl regular expressions quick start =head1 DESCRIPTION This page covers the very basics of understanding, creating and using regular expressions ('regexes') in Perl. =head1 The Guide This page assumes you already know things, like what a "pattern" is, and the basic syntax of using them. If you don't, see L<perlretut>. =head2 Simple word matching The simplest regex is simply a word, or more generally, a string of characters. A regex consisting of a word matches any string that contains that word: "Hello World" =~ /World/; # matches In this statement, C<World> is a regex and the C<//> enclosing C</World/> tells Perl to search a string for a match. The operator C<=~> associates the string with the regex match and produces a true value if the regex matched, or false if the regex did not match. In our case, C<World> matches the second word in C<"Hello World">, so the expression is true. This idea has several variations. Expressions like this are useful in conditionals: print "It matches\n" if "Hello World" =~ /World/; The sense of the match can be reversed by using C<!~> operator: print "It doesn't match\n" if "Hello World" !~ /World/; The literal string in the regex can be replaced by a variable: $greeting = "World"; print "It matches\n" if "Hello World" =~ /$greeting/; If you're matching against C<$_>, the C<$_ =~> part can be omitted: $_ = "Hello World"; print "It matches\n" if /World/; Finally, the C<//> default delimiters for a match can be changed to arbitrary delimiters by putting an C<'m'> out front: "Hello World" =~ m!World!; # matches, delimited by '!' "Hello World" =~ m{World}; # matches, note the matching '{}' "/usr/bin/perl" =~ m"/perl"; # matches after '/usr/bin', # '/' becomes an ordinary char Regexes must match a part of the string I<exactly> in order for the statement to be true: "Hello World" =~ /world/; # doesn't match, case sensitive "Hello World" =~ /o W/; # matches, ' ' is an ordinary char "Hello World" =~ /World /; # doesn't match, no ' ' at end Perl will always match at the earliest possible point in the string: "Hello World" =~ /o/; # matches 'o' in 'Hello' "That hat is red" =~ /hat/; # matches 'hat' in 'That' Not all characters can be used 'as is' in a match. Some characters, called B<metacharacters>, are considered special, and reserved for use in regex notation. The metacharacters are {}[]()^$.|*+?\ A metacharacter can be matched literally by putting a backslash before it: "2+2=4" =~ /2+2/; # doesn't match, + is a metacharacter "2+2=4" =~ /2\+2/; # matches, \+ is treated like an ordinary + 'C:\WIN32' =~ /C:\\WIN/; # matches "/usr/bin/perl" =~ /\/usr\/bin\/perl/; # matches In the last regex, the forward slash C<'/'> is also backslashed, because it is used to delimit the regex. Most of the metacharacters aren't always special, and other characters (such as the ones delimitting the pattern) become special under various circumstances. This can be confusing and lead to unexpected results. L<S<C<use re 'strict'>>|re/'strict' mode> can notify you of potential pitfalls. Non-printable ASCII characters are represented by B<escape sequences>. Common examples are C<\t> for a tab, C<\n> for a newline, and C<\r> for a carriage return. Arbitrary bytes are represented by octal escape sequences, e.g., C<\033>, or hexadecimal escape sequences, e.g., C<\x1B>: "1000\t2000" =~ m(0\t2) # matches "cat" =~ /\143\x61\x74/ # matches in ASCII, but # a weird way to spell cat Regexes are treated mostly as double-quoted strings, so variable substitution works: $foo = 'house'; 'cathouse' =~ /cat$foo/; # matches 'housecat' =~ /${foo}cat/; # matches With all of the regexes above, if the regex matched anywhere in the string, it was considered a match. To specify I<where> it should match, we would use the B<anchor> metacharacters C<^> and C<$>. The anchor C<^> means match at the beginning of the string and the anchor C<$> means match at the end of the string, or before a newline at the end of the string. Some examples: "housekeeper" =~ /keeper/; # matches "housekeeper" =~ /^keeper/; # doesn't match "housekeeper" =~ /keeper$/; # matches "housekeeper\n" =~ /keeper$/; # matches "housekeeper" =~ /^housekeeper$/; # matches =head2 Using character classes A B<character class> allows a set of possible characters, rather than just a single character, to match at a particular point in a regex. There are a number of different types of character classes, but usually when people use this term, they are referring to the type described in this section, which are technically called "Bracketed character classes", because they are denoted by brackets C<[...]>, with the set of characters to be possibly matched inside. But we'll drop the "bracketed" below to correspond with common usage. Here are some examples of (bracketed) character classes: /cat/; # matches 'cat' /[bcr]at/; # matches 'bat', 'cat', or 'rat' "abc" =~ /[cab]/; # matches 'a' In the last statement, even though C<'c'> is the first character in the class, the earliest point at which the regex can match is C<'a'>. /[yY][eE][sS]/; # match 'yes' in a case-insensitive way # 'yes', 'Yes', 'YES', etc. /yes/i; # also match 'yes' in a case-insensitive way The last example shows a match with an C<'i'> B<modifier>, which makes the match case-insensitive. Character classes also have ordinary and special characters, but the sets of ordinary and special characters inside a character class are different than those outside a character class. The special characters for a character class are C<-]\^$> and are matched using an escape: /[\]c]def/; # matches ']def' or 'cdef' $x = 'bcr'; /[$x]at/; # matches 'bat, 'cat', or 'rat' /[\$x]at/; # matches '$at' or 'xat' /[\\$x]at/; # matches '\at', 'bat, 'cat', or 'rat' The special character C<'-'> acts as a range operator within character classes, so that the unwieldy C<[0123456789]> and C<[abc...xyz]> become the svelte C<[0-9]> and C<[a-z]>: /item[0-9]/; # matches 'item0' or ... or 'item9' /[0-9a-fA-F]/; # matches a hexadecimal digit If C<'-'> is the first or last character in a character class, it is treated as an ordinary character. The special character C<^> in the first position of a character class denotes a B<negated character class>, which matches any character but those in the brackets. Both C<[...]> and C<[^...]> must match a character, or the match fails. Then /[^a]at/; # doesn't match 'aat' or 'at', but matches # all other 'bat', 'cat, '0at', '%at', etc. /[^0-9]/; # matches a non-numeric character /[a^]at/; # matches 'aat' or '^at'; here '^' is ordinary Perl has several abbreviations for common character classes. (These definitions are those that Perl uses in ASCII-safe mode with the C</a> modifier. Otherwise they could match many more non-ASCII Unicode characters as well. See L<perlrecharclass/Backslash sequences> for details.) =over 4 =item * \d is a digit and represents [0-9] =item * \s is a whitespace character and represents [\ \t\r\n\f] =item * \w is a word character (alphanumeric or _) and represents [0-9a-zA-Z_] =item * \D is a negated \d; it represents any character but a digit [^0-9] =item * \S is a negated \s; it represents any non-whitespace character [^\s] =item * \W is a negated \w; it represents any non-word character [^\w] =item * The period '.' matches any character but "\n" =back The C<\d\s\w\D\S\W> abbreviations can be used both inside and outside of character classes. Here are some in use: /\d\d:\d\d:\d\d/; # matches a hh:mm:ss time format /[\d\s]/; # matches any digit or whitespace character /\w\W\w/; # matches a word char, followed by a # non-word char, followed by a word char /..rt/; # matches any two chars, followed by 'rt' /end\./; # matches 'end.' /end[.]/; # same thing, matches 'end.' The S<B<word anchor> > C<\b> matches a boundary between a word character and a non-word character C<\w\W> or C<\W\w>: $x = "Housecat catenates house and cat"; $x =~ /\bcat/; # matches cat in 'catenates' $x =~ /cat\b/; # matches cat in 'housecat' $x =~ /\bcat\b/; # matches 'cat' at end of string In the last example, the end of the string is considered a word boundary. For natural language processing (so that, for example, apostrophes are included in words), use instead C<\b{wb}> "don't" =~ / .+? \b{wb} /x; # matches the whole string =head2 Matching this or that We can match different character strings with the B<alternation> metacharacter C<'|'>. To match C<dog> or C<cat>, we form the regex C<dog|cat>. As before, Perl will try to match the regex at the earliest possible point in the string. At each character position, Perl will first try to match the first alternative, C<dog>. If C<dog> doesn't match, Perl will then try the next alternative, C<cat>. If C<cat> doesn't match either, then the match fails and Perl moves to the next position in the string. Some examples: "cats and dogs" =~ /cat|dog|bird/; # matches "cat" "cats and dogs" =~ /dog|cat|bird/; # matches "cat" Even though C<dog> is the first alternative in the second regex, C<cat> is able to match earlier in the string. "cats" =~ /c|ca|cat|cats/; # matches "c" "cats" =~ /cats|cat|ca|c/; # matches "cats" At a given character position, the first alternative that allows the regex match to succeed will be the one that matches. Here, all the alternatives match at the first string position, so the first matches. =head2 Grouping things and hierarchical matching The B<grouping> metacharacters C<()> allow a part of a regex to be treated as a single unit. Parts of a regex are grouped by enclosing them in parentheses. The regex C<house(cat|keeper)> means match C<house> followed by either C<cat> or C<keeper>. Some more examples are /(a|b)b/; # matches 'ab' or 'bb' /(^a|b)c/; # matches 'ac' at start of string or 'bc' anywhere /house(cat|)/; # matches either 'housecat' or 'house' /house(cat(s|)|)/; # matches either 'housecats' or 'housecat' or # 'house'. Note groups can be nested. "20" =~ /(19|20|)\d\d/; # matches the null alternative '()\d\d', # because '20\d\d' can't match =head2 Extracting matches The grouping metacharacters C<()> also allow the extraction of the parts of a string that matched. For each grouping, the part that matched inside goes into the special variables C<$1>, C<$2>, etc. They can be used just as ordinary variables: # extract hours, minutes, seconds $time =~ /(\d\d):(\d\d):(\d\d)/; # match hh:mm:ss format $hours = $1; $minutes = $2; $seconds = $3; In list context, a match C</regex/> with groupings will return the list of matched values C<($1,$2,...)>. So we could rewrite it as ($hours, $minutes, $second) = ($time =~ /(\d\d):(\d\d):(\d\d)/); If the groupings in a regex are nested, C<$1> gets the group with the leftmost opening parenthesis, C<$2> the next opening parenthesis, etc. For example, here is a complex regex and the matching variables indicated below it: /(ab(cd|ef)((gi)|j))/; 1 2 34 Associated with the matching variables C<$1>, C<$2>, ... are the B<backreferences> C<\g1>, C<\g2>, ... Backreferences are matching variables that can be used I<inside> a regex: /(\w\w\w)\s\g1/; # find sequences like 'the the' in string C<$1>, C<$2>, ... should only be used outside of a regex, and C<\g1>, C<\g2>, ... only inside a regex. =head2 Matching repetitions The B<quantifier> metacharacters C<?>, C<*>, C<+>, and C<{}> allow us to determine the number of repeats of a portion of a regex we consider to be a match. Quantifiers are put immediately after the character, character class, or grouping that we want to specify. They have the following meanings: =over 4 =item * C<a?> = match 'a' 1 or 0 times =item * C<a*> = match 'a' 0 or more times, i.e., any number of times =item * C<a+> = match 'a' 1 or more times, i.e., at least once =item * C<a{n,m}> = match at least C<n> times, but not more than C<m> times. =item * C<a{n,}> = match at least C<n> or more times =item * C<a{n}> = match exactly C<n> times =back Here are some examples: /[a-z]+\s+\d*/; # match a lowercase word, at least some space, and # any number of digits /(\w+)\s+\g1/; # match doubled words of arbitrary length $year =~ /^\d{2,4}$/; # make sure year is at least 2 but not more # than 4 digits $year =~ /^\d{4}$|^\d{2}$/; # better match; throw out 3 digit dates These quantifiers will try to match as much of the string as possible, while still allowing the regex to match. So we have $x = 'the cat in the hat'; $x =~ /^(.*)(at)(.*)$/; # matches, # $1 = 'the cat in the h' # $2 = 'at' # $3 = '' (0 matches) The first quantifier C<.*> grabs as much of the string as possible while still having the regex match. The second quantifier C<.*> has no string left to it, so it matches 0 times. =head2 More matching There are a few more things you might want to know about matching operators. The global modifier C</g> allows the matching operator to match within a string as many times as possible. In scalar context, successive matches against a string will have C</g> jump from match to match, keeping track of position in the string as it goes along. You can get or set the position with the C<pos()> function. For example, $x = "cat dog house"; # 3 words while ($x =~ /(\w+)/g) { print "Word is $1, ends at position ", pos $x, "\n"; } prints Word is cat, ends at position 3 Word is dog, ends at position 7 Word is house, ends at position 13 A failed match or changing the target string resets the position. If you don't want the position reset after failure to match, add the C</c>, as in C</regex/gc>. In list context, C</g> returns a list of matched groupings, or if there are no groupings, a list of matches to the whole regex. So @words = ($x =~ /(\w+)/g); # matches, # $word[0] = 'cat' # $word[1] = 'dog' # $word[2] = 'house' =head2 Search and replace Search and replace is performed using C<s/regex/replacement/modifiers>. The C<replacement> is a Perl double-quoted string that replaces in the string whatever is matched with the C<regex>. The operator C<=~> is also used here to associate a string with C<s///>. If matching against C<$_>, the S<C<$_ =~>> can be dropped. If there is a match, C<s///> returns the number of substitutions made; otherwise it returns false. Here are a few examples: $x = "Time to feed the cat!"; $x =~ s/cat/hacker/; # $x contains "Time to feed the hacker!" $y = "'quoted words'"; $y =~ s/^'(.*)'$/$1/; # strip single quotes, # $y contains "quoted words" With the C<s///> operator, the matched variables C<$1>, C<$2>, etc. are immediately available for use in the replacement expression. With the global modifier, C<s///g> will search and replace all occurrences of the regex in the string: $x = "I batted 4 for 4"; $x =~ s/4/four/; # $x contains "I batted four for 4" $x = "I batted 4 for 4"; $x =~ s/4/four/g; # $x contains "I batted four for four" The non-destructive modifier C<s///r> causes the result of the substitution to be returned instead of modifying C<$_> (or whatever variable the substitute was bound to with C<=~>): $x = "I like dogs."; $y = $x =~ s/dogs/cats/r; print "$x $y\n"; # prints "I like dogs. I like cats." $x = "Cats are great."; print $x =~ s/Cats/Dogs/r =~ s/Dogs/Frogs/r =~ s/Frogs/Hedgehogs/r, "\n"; # prints "Hedgehogs are great." @foo = map { s/[a-z]/X/r } qw(a b c 1 2 3); # @foo is now qw(X X X 1 2 3) The evaluation modifier C<s///e> wraps an C<eval{...}> around the replacement string and the evaluated result is substituted for the matched substring. Some examples: # reverse all the words in a string $x = "the cat in the hat"; $x =~ s/(\w+)/reverse $1/ge; # $x contains "eht tac ni eht tah" # convert percentage to decimal $x = "A 39% hit rate"; $x =~ s!(\d+)%!$1/100!e; # $x contains "A 0.39 hit rate" The last example shows that C<s///> can use other delimiters, such as C<s!!!> and C<s{}{}>, and even C<s{}//>. If single quotes are used C<s'''>, then the regex and replacement are treated as single-quoted strings. =head2 The split operator C<split /regex/, string> splits C<string> into a list of substrings and returns that list. The regex determines the character sequence that C<string> is split with respect to. For example, to split a string into words, use $x = "Calvin and Hobbes"; @word = split /\s+/, $x; # $word[0] = 'Calvin' # $word[1] = 'and' # $word[2] = 'Hobbes' To extract a comma-delimited list of numbers, use $x = "1.618,2.718, 3.142"; @const = split /,\s*/, $x; # $const[0] = '1.618' # $const[1] = '2.718' # $const[2] = '3.142' If the empty regex C<//> is used, the string is split into individual characters. If the regex has groupings, then the list produced contains the matched substrings from the groupings as well: $x = "/usr/bin"; @parts = split m!(/)!, $x; # $parts[0] = '' # $parts[1] = '/' # $parts[2] = 'usr' # $parts[3] = '/' # $parts[4] = 'bin' Since the first character of $x matched the regex, C<split> prepended an empty initial element to the list. =head2 C<use re 'strict'> New in v5.22, this applies stricter rules than otherwise when compiling regular expression patterns. It can find things that, while legal, may not be what you intended. See L<'strict' in re|re/'strict' mode>. =head1 BUGS None. =head1 SEE ALSO This is just a quick start guide. For a more in-depth tutorial on regexes, see L<perlretut> and for the reference page, see L<perlre>. =head1 AUTHOR AND COPYRIGHT Copyright (c) 2000 Mark Kvale All rights reserved. This document may be distributed under the same terms as Perl itself. =head2 Acknowledgments The author would like to thank Mark-Jason Dominus, Tom Christiansen, Ilya Zakharevich, Brad Hughes, and Mike Giroux for all their helpful comments. =cut perlperf.pod 0000644 00000141331 15125556335 0007104 0 ustar 00 =head1 NAME perlperf - Perl Performance and Optimization Techniques =head1 DESCRIPTION This is an introduction to the use of performance and optimization techniques which can be used with particular reference to perl programs. While many perl developers have come from other languages, and can use their prior knowledge where appropriate, there are many other people who might benefit from a few perl specific pointers. If you want the condensed version, perhaps the best advice comes from the renowned Japanese Samurai, Miyamoto Musashi, who said: "Do Not Engage in Useless Activity" in 1645. =head1 OVERVIEW Perhaps the most common mistake programmers make is to attempt to optimize their code before a program actually does anything useful - this is a bad idea. There's no point in having an extremely fast program that doesn't work. The first job is to get a program to I<correctly> do something B<useful>, (not to mention ensuring the test suite is fully functional), and only then to consider optimizing it. Having decided to optimize existing working code, there are several simple but essential steps to consider which are intrinsic to any optimization process. =head2 ONE STEP SIDEWAYS Firstly, you need to establish a baseline time for the existing code, which timing needs to be reliable and repeatable. You'll probably want to use the C<Benchmark> or C<Devel::NYTProf> modules, or something similar, for this step, or perhaps the Unix system C<time> utility, whichever is appropriate. See the base of this document for a longer list of benchmarking and profiling modules, and recommended further reading. =head2 ONE STEP FORWARD Next, having examined the program for I<hot spots>, (places where the code seems to run slowly), change the code with the intention of making it run faster. Using version control software, like C<subversion>, will ensure no changes are irreversible. It's too easy to fiddle here and fiddle there - don't change too much at any one time or you might not discover which piece of code B<really> was the slow bit. =head2 ANOTHER STEP SIDEWAYS It's not enough to say: "that will make it run faster", you have to check it. Rerun the code under control of the benchmarking or profiling modules, from the first step above, and check that the new code executed the B<same task> in I<less time>. Save your work and repeat... =head1 GENERAL GUIDELINES The critical thing when considering performance is to remember there is no such thing as a C<Golden Bullet>, which is why there are no rules, only guidelines. It is clear that inline code is going to be faster than subroutine or method calls, because there is less overhead, but this approach has the disadvantage of being less maintainable and comes at the cost of greater memory usage - there is no such thing as a free lunch. If you are searching for an element in a list, it can be more efficient to store the data in a hash structure, and then simply look to see whether the key is defined, rather than to loop through the entire array using grep() for instance. substr() may be (a lot) faster than grep() but not as flexible, so you have another trade-off to access. Your code may contain a line which takes 0.01 of a second to execute which if you call it 1,000 times, quite likely in a program parsing even medium sized files for instance, you already have a 10 second delay, in just one single code location, and if you call that line 100,000 times, your entire program will slow down to an unbearable crawl. Using a subroutine as part of your sort is a powerful way to get exactly what you want, but will usually be slower than the built-in I<alphabetic> C<cmp> and I<numeric> C<E<lt>=E<gt>> sort operators. It is possible to make multiple passes over your data, building indices to make the upcoming sort more efficient, and to use what is known as the C<OM> (Orcish Maneuver) to cache the sort keys in advance. The cache lookup, while a good idea, can itself be a source of slowdown by enforcing a double pass over the data - once to setup the cache, and once to sort the data. Using C<pack()> to extract the required sort key into a consistent string can be an efficient way to build a single string to compare, instead of using multiple sort keys, which makes it possible to use the standard, written in C<c> and fast, perl C<sort()> function on the output, and is the basis of the C<GRT> (Guttman Rossler Transform). Some string combinations can slow the C<GRT> down, by just being too plain complex for its own good. For applications using database backends, the standard C<DBIx> namespace has tries to help with keeping things nippy, not least because it tries to I<not> query the database until the latest possible moment, but always read the docs which come with your choice of libraries. Among the many issues facing developers dealing with databases should remain aware of is to always use C<SQL> placeholders and to consider pre-fetching data sets when this might prove advantageous. Splitting up a large file by assigning multiple processes to parsing a single file, using say C<POE>, C<threads> or C<fork> can also be a useful way of optimizing your usage of the available C<CPU> resources, though this technique is fraught with concurrency issues and demands high attention to detail. Every case has a specific application and one or more exceptions, and there is no replacement for running a few tests and finding out which method works best for your particular environment, this is why writing optimal code is not an exact science, and why we love using Perl so much - TMTOWTDI. =head1 BENCHMARKS Here are a few examples to demonstrate usage of Perl's benchmarking tools. =head2 Assigning and Dereferencing Variables. I'm sure most of us have seen code which looks like, (or worse than), this: if ( $obj->{_ref}->{_myscore} >= $obj->{_ref}->{_yourscore} ) { ... This sort of code can be a real eyesore to read, as well as being very sensitive to typos, and it's much clearer to dereference the variable explicitly. We're side-stepping the issue of working with object-oriented programming techniques to encapsulate variable access via methods, only accessible through an object. Here we're just discussing the technical implementation of choice, and whether this has an effect on performance. We can see whether this dereferencing operation, has any overhead by putting comparative code in a file and running a C<Benchmark> test. # dereference #!/usr/bin/perl use strict; use warnings; use Benchmark; my $ref = { 'ref' => { _myscore => '100 + 1', _yourscore => '102 - 1', }, }; timethese(1000000, { 'direct' => sub { my $x = $ref->{ref}->{_myscore} . $ref->{ref}->{_yourscore} ; }, 'dereference' => sub { my $ref = $ref->{ref}; my $myscore = $ref->{_myscore}; my $yourscore = $ref->{_yourscore}; my $x = $myscore . $yourscore; }, }); It's essential to run any timing measurements a sufficient number of times so the numbers settle on a numerical average, otherwise each run will naturally fluctuate due to variations in the environment, to reduce the effect of contention for C<CPU> resources and network bandwidth for instance. Running the above code for one million iterations, we can take a look at the report output by the C<Benchmark> module, to see which approach is the most effective. $> perl dereference Benchmark: timing 1000000 iterations of dereference, direct... dereference: 2 wallclock secs ( 1.59 usr + 0.00 sys = 1.59 CPU) @ 628930.82/s (n=1000000) direct: 1 wallclock secs ( 1.20 usr + 0.00 sys = 1.20 CPU) @ 833333.33/s (n=1000000) The difference is clear to see and the dereferencing approach is slower. While it managed to execute an average of 628,930 times a second during our test, the direct approach managed to run an additional 204,403 times, unfortunately. Unfortunately, because there are many examples of code written using the multiple layer direct variable access, and it's usually horrible. It is, however, minusculy faster. The question remains whether the minute gain is actually worth the eyestrain, or the loss of maintainability. =head2 Search and replace or tr If we have a string which needs to be modified, while a regex will almost always be much more flexible, C<tr>, an oft underused tool, can still be a useful. One scenario might be replace all vowels with another character. The regex solution might look like this: $str =~ s/[aeiou]/x/g The C<tr> alternative might look like this: $str =~ tr/aeiou/xxxxx/ We can put that into a test file which we can run to check which approach is the fastest, using a global C<$STR> variable to assign to the C<my $str> variable so as to avoid perl trying to optimize any of the work away by noticing it's assigned only the once. # regex-transliterate #!/usr/bin/perl use strict; use warnings; use Benchmark; my $STR = "$$-this and that"; timethese( 1000000, { 'sr' => sub { my $str = $STR; $str =~ s/[aeiou]/x/g; return $str; }, 'tr' => sub { my $str = $STR; $str =~ tr/aeiou/xxxxx/; return $str; }, }); Running the code gives us our results: $> perl regex-transliterate Benchmark: timing 1000000 iterations of sr, tr... sr: 2 wallclock secs ( 1.19 usr + 0.00 sys = 1.19 CPU) @ 840336.13/s (n=1000000) tr: 0 wallclock secs ( 0.49 usr + 0.00 sys = 0.49 CPU) @ 2040816.33/s (n=1000000) The C<tr> version is a clear winner. One solution is flexible, the other is fast - and it's appropriately the programmer's choice which to use. Check the C<Benchmark> docs for further useful techniques. =head1 PROFILING TOOLS A slightly larger piece of code will provide something on which a profiler can produce more extensive reporting statistics. This example uses the simplistic C<wordmatch> program which parses a given input file and spews out a short report on the contents. # wordmatch #!/usr/bin/perl use strict; use warnings; =head1 NAME filewords - word analysis of input file =head1 SYNOPSIS filewords -f inputfilename [-d] =head1 DESCRIPTION This program parses the given filename, specified with C<-f>, and displays a simple analysis of the words found therein. Use the C<-d> switch to enable debugging messages. =cut use FileHandle; use Getopt::Long; my $debug = 0; my $file = ''; my $result = GetOptions ( 'debug' => \$debug, 'file=s' => \$file, ); die("invalid args") unless $result; unless ( -f $file ) { die("Usage: $0 -f filename [-d]"); } my $FH = FileHandle->new("< $file") or die("unable to open file($file): $!"); my $i_LINES = 0; my $i_WORDS = 0; my %count = (); my @lines = <$FH>; foreach my $line ( @lines ) { $i_LINES++; $line =~ s/\n//; my @words = split(/ +/, $line); my $i_words = scalar(@words); $i_WORDS = $i_WORDS + $i_words; debug("line: $i_LINES supplying $i_words words: @words"); my $i_word = 0; foreach my $word ( @words ) { $i_word++; $count{$i_LINES}{spec} += matches($i_word, $word, '[^a-zA-Z0-9]'); $count{$i_LINES}{only} += matches($i_word, $word, '^[^a-zA-Z0-9]+$'); $count{$i_LINES}{cons} += matches($i_word, $word, '^[(?i:bcdfghjklmnpqrstvwxyz)]+$'); $count{$i_LINES}{vows} += matches($i_word, $word, '^[(?i:aeiou)]+$'); $count{$i_LINES}{caps} += matches($i_word, $word, '^[(A-Z)]+$'); } } print report( %count ); sub matches { my $i_wd = shift; my $word = shift; my $regex = shift; my $has = 0; if ( $word =~ /($regex)/ ) { $has++ if $1; } debug( "word: $i_wd " . ($has ? 'matches' : 'does not match') . " chars: /$regex/"); return $has; } sub report { my %report = @_; my %rep; foreach my $line ( keys %report ) { foreach my $key ( keys %{ $report{$line} } ) { $rep{$key} += $report{$line}{$key}; } } my $report = qq| $0 report for $file: lines in file: $i_LINES words in file: $i_WORDS words with special (non-word) characters: $i_spec words with only special (non-word) characters: $i_only words with only consonants: $i_cons words with only capital letters: $i_caps words with only vowels: $i_vows |; return $report; } sub debug { my $message = shift; if ( $debug ) { print STDERR "DBG: $message\n"; } } exit 0; =head2 Devel::DProf This venerable module has been the de-facto standard for Perl code profiling for more than a decade, but has been replaced by a number of other modules which have brought us back to the 21st century. Although you're recommended to evaluate your tool from the several mentioned here and from the CPAN list at the base of this document, (and currently L<Devel::NYTProf> seems to be the weapon of choice - see below), we'll take a quick look at the output from L<Devel::DProf> first, to set a baseline for Perl profiling tools. Run the above program under the control of C<Devel::DProf> by using the C<-d> switch on the command-line. $> perl -d:DProf wordmatch -f perl5db.pl <...multiple lines snipped...> wordmatch report for perl5db.pl: lines in file: 9428 words in file: 50243 words with special (non-word) characters: 20480 words with only special (non-word) characters: 7790 words with only consonants: 4801 words with only capital letters: 1316 words with only vowels: 1701 C<Devel::DProf> produces a special file, called F<tmon.out> by default, and this file is read by the C<dprofpp> program, which is already installed as part of the C<Devel::DProf> distribution. If you call C<dprofpp> with no options, it will read the F<tmon.out> file in the current directory and produce a human readable statistics report of the run of your program. Note that this may take a little time. $> dprofpp Total Elapsed Time = 2.951677 Seconds User+System Time = 2.871677 Seconds Exclusive Times %Time ExclSec CumulS #Calls sec/call Csec/c Name 102. 2.945 3.003 251215 0.0000 0.0000 main::matches 2.40 0.069 0.069 260643 0.0000 0.0000 main::debug 1.74 0.050 0.050 1 0.0500 0.0500 main::report 1.04 0.030 0.049 4 0.0075 0.0123 main::BEGIN 0.35 0.010 0.010 3 0.0033 0.0033 Exporter::as_heavy 0.35 0.010 0.010 7 0.0014 0.0014 IO::File::BEGIN 0.00 - -0.000 1 - - Getopt::Long::FindOption 0.00 - -0.000 1 - - Symbol::BEGIN 0.00 - -0.000 1 - - Fcntl::BEGIN 0.00 - -0.000 1 - - Fcntl::bootstrap 0.00 - -0.000 1 - - warnings::BEGIN 0.00 - -0.000 1 - - IO::bootstrap 0.00 - -0.000 1 - - Getopt::Long::ConfigDefaults 0.00 - -0.000 1 - - Getopt::Long::Configure 0.00 - -0.000 1 - - Symbol::gensym C<dprofpp> will produce some quite detailed reporting on the activity of the C<wordmatch> program. The wallclock, user and system, times are at the top of the analysis, and after this are the main columns defining which define the report. Check the C<dprofpp> docs for details of the many options it supports. See also C<L<Apache::DProf>> which hooks C<Devel::DProf> into C<mod_perl>. =head2 Devel::Profiler Let's take a look at the same program using a different profiler: C<Devel::Profiler>, a drop-in Perl-only replacement for C<Devel::DProf>. The usage is very slightly different in that instead of using the special C<-d:> flag, you pull C<Devel::Profiler> in directly as a module using C<-M>. $> perl -MDevel::Profiler wordmatch -f perl5db.pl <...multiple lines snipped...> wordmatch report for perl5db.pl: lines in file: 9428 words in file: 50243 words with special (non-word) characters: 20480 words with only special (non-word) characters: 7790 words with only consonants: 4801 words with only capital letters: 1316 words with only vowels: 1701 C<Devel::Profiler> generates a tmon.out file which is compatible with the C<dprofpp> program, thus saving the construction of a dedicated statistics reader program. C<dprofpp> usage is therefore identical to the above example. $> dprofpp Total Elapsed Time = 20.984 Seconds User+System Time = 19.981 Seconds Exclusive Times %Time ExclSec CumulS #Calls sec/call Csec/c Name 49.0 9.792 14.509 251215 0.0000 0.0001 main::matches 24.4 4.887 4.887 260643 0.0000 0.0000 main::debug 0.25 0.049 0.049 1 0.0490 0.0490 main::report 0.00 0.000 0.000 1 0.0000 0.0000 Getopt::Long::GetOptions 0.00 0.000 0.000 2 0.0000 0.0000 Getopt::Long::ParseOptionSpec 0.00 0.000 0.000 1 0.0000 0.0000 Getopt::Long::FindOption 0.00 0.000 0.000 1 0.0000 0.0000 IO::File::new 0.00 0.000 0.000 1 0.0000 0.0000 IO::Handle::new 0.00 0.000 0.000 1 0.0000 0.0000 Symbol::gensym 0.00 0.000 0.000 1 0.0000 0.0000 IO::File::open Interestingly we get slightly different results, which is mostly because the algorithm which generates the report is different, even though the output file format was allegedly identical. The elapsed, user and system times are clearly showing the time it took for C<Devel::Profiler> to execute its own run, but the column listings feel more accurate somehow than the ones we had earlier from C<Devel::DProf>. The 102% figure has disappeared, for example. This is where we have to use the tools at our disposal, and recognise their pros and cons, before using them. Interestingly, the numbers of calls for each subroutine are identical in the two reports, it's the percentages which differ. As the author of C<Devel::Proviler> writes: ...running HTML::Template's test suite under Devel::DProf shows output() taking NO time but Devel::Profiler shows around 10% of the time is in output(). I don't know which to trust but my gut tells me something is wrong with Devel::DProf. HTML::Template::output() is a big routine that's called for every test. Either way, something needs fixing. YMMV. See also C<L<Devel::Apache::Profiler>> which hooks C<Devel::Profiler> into C<mod_perl>. =head2 Devel::SmallProf The C<Devel::SmallProf> profiler examines the runtime of your Perl program and produces a line-by-line listing to show how many times each line was called, and how long each line took to execute. It is called by supplying the familiar C<-d> flag to Perl at runtime. $> perl -d:SmallProf wordmatch -f perl5db.pl <...multiple lines snipped...> wordmatch report for perl5db.pl: lines in file: 9428 words in file: 50243 words with special (non-word) characters: 20480 words with only special (non-word) characters: 7790 words with only consonants: 4801 words with only capital letters: 1316 words with only vowels: 1701 C<Devel::SmallProf> writes it's output into a file called F<smallprof.out>, by default. The format of the file looks like this: <num> <time> <ctime> <line>:<text> When the program has terminated, the output may be examined and sorted using any standard text filtering utilities. Something like the following may be sufficient: $> cat smallprof.out | grep \d*: | sort -k3 | tac | head -n20 251215 1.65674 7.68000 75: if ( $word =~ /($regex)/ ) { 251215 0.03264 4.40000 79: debug("word: $i_wd ".($has ? 'matches' : 251215 0.02693 4.10000 81: return $has; 260643 0.02841 4.07000 128: if ( $debug ) { 260643 0.02601 4.04000 126: my $message = shift; 251215 0.02641 3.91000 73: my $has = 0; 251215 0.03311 3.71000 70: my $i_wd = shift; 251215 0.02699 3.69000 72: my $regex = shift; 251215 0.02766 3.68000 71: my $word = shift; 50243 0.59726 1.00000 59: $count{$i_LINES}{cons} = 50243 0.48175 0.92000 61: $count{$i_LINES}{spec} = 50243 0.00644 0.89000 56: my $i_cons = matches($i_word, $word, 50243 0.48837 0.88000 63: $count{$i_LINES}{caps} = 50243 0.00516 0.88000 58: my $i_caps = matches($i_word, $word, '^[(A- 50243 0.00631 0.81000 54: my $i_spec = matches($i_word, $word, '[^a- 50243 0.00496 0.80000 57: my $i_vows = matches($i_word, $word, 50243 0.00688 0.80000 53: $i_word++; 50243 0.48469 0.79000 62: $count{$i_LINES}{only} = 50243 0.48928 0.77000 60: $count{$i_LINES}{vows} = 50243 0.00683 0.75000 55: my $i_only = matches($i_word, $word, '^[^a- You can immediately see a slightly different focus to the subroutine profiling modules, and we start to see exactly which line of code is taking the most time. That regex line is looking a bit suspicious, for example. Remember that these tools are supposed to be used together, there is no single best way to profile your code, you need to use the best tools for the job. See also C<L<Apache::SmallProf>> which hooks C<Devel::SmallProf> into C<mod_perl>. =head2 Devel::FastProf C<Devel::FastProf> is another Perl line profiler. This was written with a view to getting a faster line profiler, than is possible with for example C<Devel::SmallProf>, because it's written in C<C>. To use C<Devel::FastProf>, supply the C<-d> argument to Perl: $> perl -d:FastProf wordmatch -f perl5db.pl <...multiple lines snipped...> wordmatch report for perl5db.pl: lines in file: 9428 words in file: 50243 words with special (non-word) characters: 20480 words with only special (non-word) characters: 7790 words with only consonants: 4801 words with only capital letters: 1316 words with only vowels: 1701 C<Devel::FastProf> writes statistics to the file F<fastprof.out> in the current directory. The output file, which can be specified, can be interpreted by using the C<fprofpp> command-line program. $> fprofpp | head -n20 # fprofpp output format is: # filename:line time count: source wordmatch:75 3.93338 251215: if ( $word =~ /($regex)/ ) { wordmatch:79 1.77774 251215: debug("word: $i_wd ".($has ? 'matches' : 'does not match')." chars: /$regex/"); wordmatch:81 1.47604 251215: return $has; wordmatch:126 1.43441 260643: my $message = shift; wordmatch:128 1.42156 260643: if ( $debug ) { wordmatch:70 1.36824 251215: my $i_wd = shift; wordmatch:71 1.36739 251215: my $word = shift; wordmatch:72 1.35939 251215: my $regex = shift; Straightaway we can see that the number of times each line has been called is identical to the C<Devel::SmallProf> output, and the sequence is only very slightly different based on the ordering of the amount of time each line took to execute, C<if ( $debug ) { > and C<my $message = shift;>, for example. The differences in the actual times recorded might be in the algorithm used internally, or it could be due to system resource limitations or contention. See also the L<DBIx::Profile> which will profile database queries running under the C<DBIx::*> namespace. =head2 Devel::NYTProf C<Devel::NYTProf> is the B<next generation> of Perl code profiler, fixing many shortcomings in other tools and implementing many cool features. First of all it can be used as either a I<line> profiler, a I<block> or a I<subroutine> profiler, all at once. It can also use sub-microsecond (100ns) resolution on systems which provide C<clock_gettime()>. It can be started and stopped even by the program being profiled. It's a one-line entry to profile C<mod_perl> applications. It's written in C<c> and is probably the fastest profiler available for Perl. The list of coolness just goes on. Enough of that, let's see how to it works - just use the familiar C<-d> switch to plug it in and run the code. $> perl -d:NYTProf wordmatch -f perl5db.pl wordmatch report for perl5db.pl: lines in file: 9427 words in file: 50243 words with special (non-word) characters: 20480 words with only special (non-word) characters: 7790 words with only consonants: 4801 words with only capital letters: 1316 words with only vowels: 1701 C<NYTProf> will generate a report database into the file F<nytprof.out> by default. Human readable reports can be generated from here by using the supplied C<nytprofhtml> (HTML output) and C<nytprofcsv> (CSV output) programs. We've used the Unix system C<html2text> utility to convert the F<nytprof/index.html> file for convenience here. $> html2text nytprof/index.html Performance Profile Index For wordmatch Run on Fri Sep 26 13:46:39 2008 Reported on Fri Sep 26 13:47:23 2008 Top 15 Subroutines -- ordered by exclusive time |Calls |P |F |Inclusive|Exclusive|Subroutine | | | | |Time |Time | | |251215|5 |1 |13.09263 |10.47692 |main:: |matches | |260642|2 |1 |2.71199 |2.71199 |main:: |debug | |1 |1 |1 |0.21404 |0.21404 |main:: |report | |2 |2 |2 |0.00511 |0.00511 |XSLoader:: |load (xsub) | |14 |14|7 |0.00304 |0.00298 |Exporter:: |import | |3 |1 |1 |0.00265 |0.00254 |Exporter:: |as_heavy | |10 |10|4 |0.00140 |0.00140 |vars:: |import | |13 |13|1 |0.00129 |0.00109 |constant:: |import | |1 |1 |1 |0.00360 |0.00096 |FileHandle:: |import | |3 |3 |3 |0.00086 |0.00074 |warnings::register::|import | |9 |3 |1 |0.00036 |0.00036 |strict:: |bits | |13 |13|13|0.00032 |0.00029 |strict:: |import | |2 |2 |2 |0.00020 |0.00020 |warnings:: |import | |2 |1 |1 |0.00020 |0.00020 |Getopt::Long:: |ParseOptionSpec| |7 |7 |6 |0.00043 |0.00020 |strict:: |unimport | For more information see the full list of 189 subroutines. The first part of the report already shows the critical information regarding which subroutines are using the most time. The next gives some statistics about the source files profiled. Source Code Files -- ordered by exclusive time then name |Stmts |Exclusive|Avg. |Reports |Source File | | |Time | | | | |2699761|15.66654 |6e-06 |line . block . sub|wordmatch | |35 |0.02187 |0.00062|line . block . sub|IO/Handle.pm | |274 |0.01525 |0.00006|line . block . sub|Getopt/Long.pm | |20 |0.00585 |0.00029|line . block . sub|Fcntl.pm | |128 |0.00340 |0.00003|line . block . sub|Exporter/Heavy.pm | |42 |0.00332 |0.00008|line . block . sub|IO/File.pm | |261 |0.00308 |0.00001|line . block . sub|Exporter.pm | |323 |0.00248 |8e-06 |line . block . sub|constant.pm | |12 |0.00246 |0.00021|line . block . sub|File/Spec/Unix.pm | |191 |0.00240 |0.00001|line . block . sub|vars.pm | |77 |0.00201 |0.00003|line . block . sub|FileHandle.pm | |12 |0.00198 |0.00016|line . block . sub|Carp.pm | |14 |0.00175 |0.00013|line . block . sub|Symbol.pm | |15 |0.00130 |0.00009|line . block . sub|IO.pm | |22 |0.00120 |0.00005|line . block . sub|IO/Seekable.pm | |198 |0.00085 |4e-06 |line . block . sub|warnings/register.pm| |114 |0.00080 |7e-06 |line . block . sub|strict.pm | |47 |0.00068 |0.00001|line . block . sub|warnings.pm | |27 |0.00054 |0.00002|line . block . sub|overload.pm | |9 |0.00047 |0.00005|line . block . sub|SelectSaver.pm | |13 |0.00045 |0.00003|line . block . sub|File/Spec.pm | |2701595|15.73869 | |Total | |128647 |0.74946 | |Average | | |0.00201 |0.00003|Median | | |0.00121 |0.00003|Deviation | Report produced by the NYTProf 2.03 Perl profiler, developed by Tim Bunce and Adam Kaplan. At this point, if you're using the I<html> report, you can click through the various links to bore down into each subroutine and each line of code. Because we're using the text reporting here, and there's a whole directory full of reports built for each source file, we'll just display a part of the corresponding F<wordmatch-line.html> file, sufficient to give an idea of the sort of output you can expect from this cool tool. $> html2text nytprof/wordmatch-line.html Performance Profile -- -block view-.-line view-.-sub view- For wordmatch Run on Fri Sep 26 13:46:39 2008 Reported on Fri Sep 26 13:47:22 2008 File wordmatch Subroutines -- ordered by exclusive time |Calls |P|F|Inclusive|Exclusive|Subroutine | | | | |Time |Time | | |251215|5|1|13.09263 |10.47692 |main::|matches| |260642|2|1|2.71199 |2.71199 |main::|debug | |1 |1|1|0.21404 |0.21404 |main::|report | |0 |0|0|0 |0 |main::|BEGIN | |Line|Stmts.|Exclusive|Avg. |Code | | | |Time | | | |1 | | | |#!/usr/bin/perl | |2 | | | | | | | | | |use strict; | |3 |3 |0.00086 |0.00029|# spent 0.00003s making 1 calls to strict:: | | | | | |import | | | | | |use warnings; | |4 |3 |0.01563 |0.00521|# spent 0.00012s making 1 calls to warnings:: | | | | | |import | |5 | | | | | |6 | | | |=head1 NAME | |7 | | | | | |8 | | | |filewords - word analysis of input file | <...snip...> |62 |1 |0.00445 |0.00445|print report( %count ); | | | | | |# spent 0.21404s making 1 calls to main::report| |63 | | | | | | | | | |# spent 23.56955s (10.47692+2.61571) within | | | | | |main::matches which was called 251215 times, | | | | | |avg 0.00005s/call: # 50243 times | | | | | |(2.12134+0.51939s) at line 57 of wordmatch, avg| | | | | |0.00005s/call # 50243 times (2.17735+0.54550s) | |64 | | | |at line 56 of wordmatch, avg 0.00005s/call # | | | | | |50243 times (2.10992+0.51797s) at line 58 of | | | | | |wordmatch, avg 0.00005s/call # 50243 times | | | | | |(2.12696+0.51598s) at line 55 of wordmatch, avg| | | | | |0.00005s/call # 50243 times (1.94134+0.51687s) | | | | | |at line 54 of wordmatch, avg 0.00005s/call | | | | | |sub matches { | <...snip...> |102 | | | | | | | | | |# spent 2.71199s within main::debug which was | | | | | |called 260642 times, avg 0.00001s/call: # | | | | | |251215 times (2.61571+0s) by main::matches at | |103 | | | |line 74 of wordmatch, avg 0.00001s/call # 9427 | | | | | |times (0.09628+0s) at line 50 of wordmatch, avg| | | | | |0.00001s/call | | | | | |sub debug { | |104 |260642|0.58496 |2e-06 |my $message = shift; | |105 | | | | | |106 |260642|1.09917 |4e-06 |if ( $debug ) { | |107 | | | |print STDERR "DBG: $message\n"; | |108 | | | |} | |109 | | | |} | |110 | | | | | |111 |1 |0.01501 |0.01501|exit 0; | |112 | | | | | Oodles of very useful information in there - this seems to be the way forward. See also C<L<Devel::NYTProf::Apache>> which hooks C<Devel::NYTProf> into C<mod_perl>. =head1 SORTING Perl modules are not the only tools a performance analyst has at their disposal, system tools like C<time> should not be overlooked as the next example shows, where we take a quick look at sorting. Many books, theses and articles, have been written about efficient sorting algorithms, and this is not the place to repeat such work, there's several good sorting modules which deserve taking a look at too: C<Sort::Maker>, C<Sort::Key> spring to mind. However, it's still possible to make some observations on certain Perl specific interpretations on issues relating to sorting data sets and give an example or two with regard to how sorting large data volumes can effect performance. Firstly, an often overlooked point when sorting large amounts of data, one can attempt to reduce the data set to be dealt with and in many cases C<grep()> can be quite useful as a simple filter: @data = sort grep { /$filter/ } @incoming A command such as this can vastly reduce the volume of material to actually sort through in the first place, and should not be too lightly disregarded purely on the basis of its simplicity. The C<KISS> principle is too often overlooked - the next example uses the simple system C<time> utility to demonstrate. Let's take a look at an actual example of sorting the contents of a large file, an apache logfile would do. This one has over a quarter of a million lines, is 50M in size, and a snippet of it looks like this: # logfile 188.209-65-87.adsl-dyn.isp.belgacom.be - - [08/Feb/2007:12:57:16 +0000] "GET /favicon.ico HTTP/1.1" 404 209 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" 188.209-65-87.adsl-dyn.isp.belgacom.be - - [08/Feb/2007:12:57:16 +0000] "GET /favicon.ico HTTP/1.1" 404 209 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" 151.56.71.198 - - [08/Feb/2007:12:57:41 +0000] "GET /suse-on-vaio.html HTTP/1.1" 200 2858 "http://www.linux-on-laptops.com/sony.html" "Mozilla/5.0 (Windows; U; Windows NT 5.2; en-US; rv:1.8.1.1) Gecko/20061204 Firefox/2.0.0.1" 151.56.71.198 - - [08/Feb/2007:12:57:42 +0000] "GET /data/css HTTP/1.1" 404 206 "http://www.rfi.net/suse-on-vaio.html" "Mozilla/5.0 (Windows; U; Windows NT 5.2; en-US; rv:1.8.1.1) Gecko/20061204 Firefox/2.0.0.1" 151.56.71.198 - - [08/Feb/2007:12:57:43 +0000] "GET /favicon.ico HTTP/1.1" 404 209 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.2; en-US; rv:1.8.1.1) Gecko/20061204 Firefox/2.0.0.1" 217.113.68.60 - - [08/Feb/2007:13:02:15 +0000] "GET / HTTP/1.1" 304 - "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" 217.113.68.60 - - [08/Feb/2007:13:02:16 +0000] "GET /data/css HTTP/1.1" 404 206 "http://www.rfi.net/" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" debora.to.isac.cnr.it - - [08/Feb/2007:13:03:58 +0000] "GET /suse-on-vaio.html HTTP/1.1" 200 2858 "http://www.linux-on-laptops.com/sony.html" "Mozilla/5.0 (compatible; Konqueror/3.4; Linux) KHTML/3.4.0 (like Gecko)" debora.to.isac.cnr.it - - [08/Feb/2007:13:03:58 +0000] "GET /data/css HTTP/1.1" 404 206 "http://www.rfi.net/suse-on-vaio.html" "Mozilla/5.0 (compatible; Konqueror/3.4; Linux) KHTML/3.4.0 (like Gecko)" debora.to.isac.cnr.it - - [08/Feb/2007:13:03:58 +0000] "GET /favicon.ico HTTP/1.1" 404 209 "-" "Mozilla/5.0 (compatible; Konqueror/3.4; Linux) KHTML/3.4.0 (like Gecko)" 195.24.196.99 - - [08/Feb/2007:13:26:48 +0000] "GET / HTTP/1.0" 200 3309 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.8.0.9) Gecko/20061206 Firefox/1.5.0.9" 195.24.196.99 - - [08/Feb/2007:13:26:58 +0000] "GET /data/css HTTP/1.0" 404 206 "http://www.rfi.net/" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.8.0.9) Gecko/20061206 Firefox/1.5.0.9" 195.24.196.99 - - [08/Feb/2007:13:26:59 +0000] "GET /favicon.ico HTTP/1.0" 404 209 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.8.0.9) Gecko/20061206 Firefox/1.5.0.9" crawl1.cosmixcorp.com - - [08/Feb/2007:13:27:57 +0000] "GET /robots.txt HTTP/1.0" 200 179 "-" "voyager/1.0" crawl1.cosmixcorp.com - - [08/Feb/2007:13:28:25 +0000] "GET /links.html HTTP/1.0" 200 3413 "-" "voyager/1.0" fhm226.internetdsl.tpnet.pl - - [08/Feb/2007:13:37:32 +0000] "GET /suse-on-vaio.html HTTP/1.1" 200 2858 "http://www.linux-on-laptops.com/sony.html" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" fhm226.internetdsl.tpnet.pl - - [08/Feb/2007:13:37:34 +0000] "GET /data/css HTTP/1.1" 404 206 "http://www.rfi.net/suse-on-vaio.html" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" 80.247.140.134 - - [08/Feb/2007:13:57:35 +0000] "GET / HTTP/1.1" 200 3309 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.1.4322)" 80.247.140.134 - - [08/Feb/2007:13:57:37 +0000] "GET /data/css HTTP/1.1" 404 206 "http://www.rfi.net" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.1.4322)" pop.compuscan.co.za - - [08/Feb/2007:14:10:43 +0000] "GET / HTTP/1.1" 200 3309 "-" "www.clamav.net" livebot-207-46-98-57.search.live.com - - [08/Feb/2007:14:12:04 +0000] "GET /robots.txt HTTP/1.0" 200 179 "-" "msnbot/1.0 (+http://search.msn.com/msnbot.htm)" livebot-207-46-98-57.search.live.com - - [08/Feb/2007:14:12:04 +0000] "GET /html/oracle.html HTTP/1.0" 404 214 "-" "msnbot/1.0 (+http://search.msn.com/msnbot.htm)" dslb-088-064-005-154.pools.arcor-ip.net - - [08/Feb/2007:14:12:15 +0000] "GET / HTTP/1.1" 200 3309 "-" "www.clamav.net" 196.201.92.41 - - [08/Feb/2007:14:15:01 +0000] "GET / HTTP/1.1" 200 3309 "-" "MOT-L7/08.B7.DCR MIB/2.2.1 Profile/MIDP-2.0 Configuration/CLDC-1.1" The specific task here is to sort the 286,525 lines of this file by Response Code, Query, Browser, Referring Url, and lastly Date. One solution might be to use the following code, which iterates over the files given on the command-line. # sort-apache-log #!/usr/bin/perl -n use strict; use warnings; my @data; LINE: while ( <> ) { my $line = $_; if ( $line =~ m/^( ([\w\.\-]+) # client \s*-\s*-\s*\[ ([^]]+) # date \]\s*"\w+\s* (\S+) # query [^"]+"\s* (\d+) # status \s+\S+\s+"[^"]*"\s+" ([^"]*) # browser " .* )$/x ) { my @chunks = split(/ +/, $line); my $ip = $1; my $date = $2; my $query = $3; my $status = $4; my $browser = $5; push(@data, [$ip, $date, $query, $status, $browser, $line]); } } my @sorted = sort { $a->[3] cmp $b->[3] || $a->[2] cmp $b->[2] || $a->[0] cmp $b->[0] || $a->[1] cmp $b->[1] || $a->[4] cmp $b->[4] } @data; foreach my $data ( @sorted ) { print $data->[5]; } exit 0; When running this program, redirect C<STDOUT> so it is possible to check the output is correct from following test runs and use the system C<time> utility to check the overall runtime. $> time ./sort-apache-log logfile > out-sort real 0m17.371s user 0m15.757s sys 0m0.592s The program took just over 17 wallclock seconds to run. Note the different values C<time> outputs, it's important to always use the same one, and to not confuse what each one means. =over 4 =item Elapsed Real Time The overall, or wallclock, time between when C<time> was called, and when it terminates. The elapsed time includes both user and system times, and time spent waiting for other users and processes on the system. Inevitably, this is the most approximate of the measurements given. =item User CPU Time The user time is the amount of time the entire process spent on behalf of the user on this system executing this program. =item System CPU Time The system time is the amount of time the kernel itself spent executing routines, or system calls, on behalf of this process user. =back Running this same process as a C<Schwarzian Transform> it is possible to eliminate the input and output arrays for storing all the data, and work on the input directly as it arrives too. Otherwise, the code looks fairly similar: # sort-apache-log-schwarzian #!/usr/bin/perl -n use strict; use warnings; print map $_->[0] => sort { $a->[4] cmp $b->[4] || $a->[3] cmp $b->[3] || $a->[1] cmp $b->[1] || $a->[2] cmp $b->[2] || $a->[5] cmp $b->[5] } map [ $_, m/^( ([\w\.\-]+) # client \s*-\s*-\s*\[ ([^]]+) # date \]\s*"\w+\s* (\S+) # query [^"]+"\s* (\d+) # status \s+\S+\s+"[^"]*"\s+" ([^"]*) # browser " .* )$/xo ] => <>; exit 0; Run the new code against the same logfile, as above, to check the new time. $> time ./sort-apache-log-schwarzian logfile > out-schwarz real 0m9.664s user 0m8.873s sys 0m0.704s The time has been cut in half, which is a respectable speed improvement by any standard. Naturally, it is important to check the output is consistent with the first program run, this is where the Unix system C<cksum> utility comes in. $> cksum out-sort out-schwarz 3044173777 52029194 out-sort 3044173777 52029194 out-schwarz BTW. Beware too of pressure from managers who see you speed a program up by 50% of the runtime once, only to get a request one month later to do the same again (true story) - you'll just have to point out you're only human, even if you are a Perl programmer, and you'll see what you can do... =head1 LOGGING An essential part of any good development process is appropriate error handling with appropriately informative messages, however there exists a school of thought which suggests that log files should be I<chatty>, as if the chain of unbroken output somehow ensures the survival of the program. If speed is in any way an issue, this approach is wrong. A common sight is code which looks something like this: logger->debug( "A logging message via process-id: $$ INC: " . Dumper(\%INC) ) The problem is that this code will always be parsed and executed, even when the debug level set in the logging configuration file is zero. Once the debug() subroutine has been entered, and the internal C<$debug> variable confirmed to be zero, for example, the message which has been sent in will be discarded and the program will continue. In the example given though, the C<\%INC> hash will already have been dumped, and the message string constructed, all of which work could be bypassed by a debug variable at the statement level, like this: logger->debug( "A logging message via process-id: $$ INC: " . Dumper(\%INC) ) if $DEBUG; This effect can be demonstrated by setting up a test script with both forms, including a C<debug()> subroutine to emulate typical C<logger()> functionality. # ifdebug #!/usr/bin/perl use strict; use warnings; use Benchmark; use Data::Dumper; my $DEBUG = 0; sub debug { my $msg = shift; if ( $DEBUG ) { print "DEBUG: $msg\n"; } }; timethese(100000, { 'debug' => sub { debug( "A $0 logging message via process-id: $$" . Dumper(\%INC) ) }, 'ifdebug' => sub { debug( "A $0 logging message via process-id: $$" . Dumper(\%INC) ) if $DEBUG }, }); Let's see what C<Benchmark> makes of this: $> perl ifdebug Benchmark: timing 100000 iterations of constant, sub... ifdebug: 0 wallclock secs ( 0.01 usr + 0.00 sys = 0.01 CPU) @ 10000000.00/s (n=100000) (warning: too few iterations for a reliable count) debug: 14 wallclock secs (13.18 usr + 0.04 sys = 13.22 CPU) @ 7564.30/s (n=100000) In the one case the code, which does exactly the same thing as far as outputting any debugging information is concerned, in other words nothing, takes 14 seconds, and in the other case the code takes one hundredth of a second. Looks fairly definitive. Use a C<$DEBUG> variable BEFORE you call the subroutine, rather than relying on the smart functionality inside it. =head2 Logging if DEBUG (constant) It's possible to take the previous idea a little further, by using a compile time C<DEBUG> constant. # ifdebug-constant #!/usr/bin/perl use strict; use warnings; use Benchmark; use Data::Dumper; use constant DEBUG => 0 ; sub debug { if ( DEBUG ) { my $msg = shift; print "DEBUG: $msg\n"; } }; timethese(100000, { 'debug' => sub { debug( "A $0 logging message via process-id: $$" . Dumper(\%INC) ) }, 'constant' => sub { debug( "A $0 logging message via process-id: $$" . Dumper(\%INC) ) if DEBUG }, }); Running this program produces the following output: $> perl ifdebug-constant Benchmark: timing 100000 iterations of constant, sub... constant: 0 wallclock secs (-0.00 usr + 0.00 sys = -0.00 CPU) @ -7205759403792793600000.00/s (n=100000) (warning: too few iterations for a reliable count) sub: 14 wallclock secs (13.09 usr + 0.00 sys = 13.09 CPU) @ 7639.42/s (n=100000) The C<DEBUG> constant wipes the floor with even the C<$debug> variable, clocking in at minus zero seconds, and generates a "warning: too few iterations for a reliable count" message into the bargain. To see what is really going on, and why we had too few iterations when we thought we asked for 100000, we can use the very useful C<B::Deparse> to inspect the new code: $> perl -MO=Deparse ifdebug-constant use Benchmark; use Data::Dumper; use constant ('DEBUG', 0); sub debug { use warnings; use strict 'refs'; 0; } use warnings; use strict 'refs'; timethese(100000, {'sub', sub { debug "A $0 logging message via process-id: $$" . Dumper(\%INC); } , 'constant', sub { 0; } }); ifdebug-constant syntax OK The output shows the constant() subroutine we're testing being replaced with the value of the C<DEBUG> constant: zero. The line to be tested has been completely optimized away, and you can't get much more efficient than that. =head1 POSTSCRIPT This document has provided several way to go about identifying hot-spots, and checking whether any modifications have improved the runtime of the code. As a final thought, remember that it's not (at the time of writing) possible to produce a useful program which will run in zero or negative time and this basic principle can be written as: I<useful programs are slow> by their very definition. It is of course possible to write a nearly instantaneous program, but it's not going to do very much, here's a very efficient one: $> perl -e 0 Optimizing that any further is a job for C<p5p>. =head1 SEE ALSO Further reading can be found using the modules and links below. =head2 PERLDOCS For example: C<perldoc -f sort>. L<perlfaq4>. L<perlfork>, L<perlfunc>, L<perlretut>, L<perlthrtut>. L<threads>. =head2 MAN PAGES C<time>. =head2 MODULES It's not possible to individually showcase all the performance related code for Perl here, naturally, but here's a short list of modules from the CPAN which deserve further attention. Apache::DProf Apache::SmallProf Benchmark DBIx::Profile Devel::AutoProfiler Devel::DProf Devel::DProfLB Devel::FastProf Devel::GraphVizProf Devel::NYTProf Devel::NYTProf::Apache Devel::Profiler Devel::Profile Devel::Profit Devel::SmallProf Devel::WxProf POE::Devel::Profiler Sort::Key Sort::Maker =head2 URLS Very useful online reference material: http://www.ccl4.org/~nick/P/Fast_Enough/ http://www-128.ibm.com/developerworks/library/l-optperl.html http://perlbuzz.com/2007/11/bind-output-variables-in-dbi-for-speed-and-safety.html http://en.wikipedia.org/wiki/Performance_analysis http://apache.perl.org/docs/1.0/guide/performance.html http://perlgolf.sourceforge.net/ http://www.sysarch.com/Perl/sort_paper.html =head1 AUTHOR Richard Foley <richard.foley@rfi.net> Copyright (c) 2008 =cut perlwin32.pod 0000644 00000116575 15125556335 0007126 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specially designed to be readable as is. =head1 NAME perlwin32 - Perl under Windows =head1 SYNOPSIS These are instructions for building Perl under Windows 2000 and later. =head1 DESCRIPTION Before you start, you should glance through the README file found in the top-level directory to which the Perl distribution was extracted. Make sure you read and understand the terms under which this software is being distributed. Also make sure you read L</BUGS AND CAVEATS> below for the known limitations of this port. The INSTALL file in the perl top-level has much information that is only relevant to people building Perl on Unix-like systems. In particular, you can safely ignore any information that talks about "Configure". You may also want to look at one other option for building a perl that will work on Windows: the README.cygwin file, which give a different set of rules to build a perl for Windows. This method will probably enable you to build a more Unix-compatible perl, but you will also need to download and use various other build-time and run-time support software described in that file. This set of instructions is meant to describe a so-called "native" port of Perl to the Windows platform. This includes both 32-bit and 64-bit Windows operating systems. The resulting Perl requires no additional software to run (other than what came with your operating system). Currently, this port is capable of using one of the following compilers on the Intel x86 architecture: Microsoft Visual C++ version 6.0 or later Intel C++ Compiler (experimental) Gcc by mingw.org gcc version 3.4.5 or later with runtime < 3.21 Gcc by mingw-w64.org gcc version 4.4.3 or later Note that the last two of these are actually competing projects both delivering complete gcc toolchain for MS Windows: =over 4 =item L<http://mingw.org> Delivers gcc toolchain targeting 32-bit Windows platform. =item L<http://mingw-w64.org> Delivers gcc toolchain targeting both 64-bit Windows and 32-bit Windows platforms (despite the project name "mingw-w64" they are not only 64-bit oriented). They deliver the native gcc compilers and cross-compilers that are also supported by perl's makefile. =back The Microsoft Visual C++ compilers are also now being given away free. They are available as "Visual C++ Toolkit 2003" or "Visual C++ 2005-2019 Express [or Community, from 2017] Edition" (and also as part of the ".NET Framework SDK") and are the same compilers that ship with "Visual C++ .NET 2003 Professional" or "Visual C++ 2005-2019 Professional" respectively. This port can also be built on IA64/AMD64 using: Microsoft Platform SDK Nov 2001 (64-bit compiler and tools) MinGW64 compiler (gcc version 4.4.3 or later) The Windows SDK can be downloaded from L<https://developer.microsoft.com/windows/downloads/sdk-archive>. The MinGW64 compiler is available at L<http://mingw-w64.org>. The latter is actually a cross-compiler targeting Win64. There's also a trimmed down compiler (no java, or gfortran) suitable for building perl available at: L<http://strawberryperl.com/package/kmx/64_gcctoolchain/> NOTE: If you're using a 32-bit compiler to build perl on a 64-bit Windows operating system, then you should set the WIN64 environment variable to "undef". Also, the trimmed down compiler only passes tests when USE_ITHREADS *= define (as opposed to undef) and when the CFG *= Debug line is commented out. This port fully supports MakeMaker (the set of modules that is used to build extensions to perl). Therefore, you should be able to build and install most extensions found in the CPAN sites. See L</Usage Hints for Perl on Windows> below for general hints about this. =head2 Setting Up Perl on Windows =over 4 =item Make You need a "make" program to build the sources. If you are using Visual C++ or the Windows SDK tools, you can use nmake supplied with Visual C++ or Windows SDK. You may also use, for Visual C++ or Windows SDK, dmake or gmake instead of nmake. dmake is open source software, but is not included with Visual C++ or Windows SDK. Builds using gcc need dmake or gmake. nmake is not supported for gcc builds. Parallel building is only supported with dmake and gmake, not nmake. When using dmake it is recommended to use dmake 4.13 or newer for parallel building. Older dmakes, in parallel mode, have very high CPU usage and pound the disk/filing system with duplicate I/O calls in an aggressive polling loop. A port of dmake for Windows is available from: L<https://metacpan.org/release/dmake> Fetch and install dmake somewhere on your path. =item Command Shell Use the default "cmd" shell that comes with Windows. Some versions of the popular 4DOS/NT shell have incompatibilities that may cause you trouble. If the build fails under that shell, try building again with the cmd shell. Make sure the path to the build directory does not contain spaces. The build usually works in this circumstance, but some tests will fail. =item Microsoft Visual C++ The nmake that comes with Visual C++ will suffice for building. Visual C++ requires that certain things be set up in the console before Visual C++ will sucessfully run. To make a console box be able to run the C compiler, you will need to beforehand, run C<vcvarsall.bat x86> to compile for x86-32 and for x86-64 C<vcvarsall.bat amd64>. On a typical install of a Microsoft C++ compiler product, these batch files will already be in your C<PATH> environment variable so you may just type them without an absolute path into your console. If you need to find the absolute path to the batch file, it is usually found somewhere like C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC. With some newer Micrsoft C products (released after ~2004), the installer will put a shortcut in the start menu to launch a new console window with the console already set up for your target architecture (x86-32 or x86-64 or IA64). With the newer compilers, you may also use the older batch files if you choose so. =item Microsoft Visual C++ 2008-2019 Express/Community Edition These free versions of Visual C++ 2008-2019 Professional contain the same compilers and linkers that ship with the full versions, and also contain everything necessary to build Perl, rather than requiring a separate download of the Windows SDK like previous versions did. These packages can be downloaded by searching in the Download Center at L<https://www.microsoft.com/downloads/search.aspx?displaylang=en>. (Providing exact links to these packages has proven a pointless task because the links keep on changing so often.) Install Visual C++ 2008-2019 Express/Community, then setup your environment using, e.g. C:\Program Files\Microsoft Visual Studio 12.0\Common7\Tools\vsvars32.bat (assuming the default installation location was chosen). Perl should now build using the win32/Makefile. You will need to edit that file to set CCTYPE to one of MSVC90-MSVC142 first. =item Microsoft Visual C++ 2005 Express Edition This free version of Visual C++ 2005 Professional contains the same compiler and linker that ship with the full version, but doesn't contain everything necessary to build Perl. You will also need to download the "Windows SDK" (the "Core SDK" and "MDAC SDK" components are required) for more header files and libraries. These packages can both be downloaded by searching in the Download Center at L<http://www.microsoft.com/downloads/search.aspx?displaylang=en>. (Providing exact links to these packages has proven a pointless task because the links keep on changing so often.) Try to obtain the latest version of the Windows SDK. Sometimes these packages contain a particular Windows OS version in their name, but actually work on other OS versions too. For example, the "Windows Server 2003 R2 Platform SDK" also runs on Windows XP SP2 and Windows 2000. Install Visual C++ 2005 first, then the Platform SDK. Setup your environment as follows (assuming default installation locations were chosen): SET PlatformSDKDir=C:\Program Files\Microsoft Platform SDK SET PATH=%SystemRoot%\system32;%SystemRoot%;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE;C:\Program Files\Microsoft Visual Studio 8\VC\BIN;C:\Program Files\Microsoft Visual Studio 8\Common7\Tools;C:\Program Files\Microsoft Visual Studio 8\SDK\v2.0\bin;C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727;C:\Program Files\Microsoft Visual Studio 8\VC\VCPackages;%PlatformSDKDir%\Bin SET INCLUDE=C:\Program Files\Microsoft Visual Studio 8\VC\INCLUDE;%PlatformSDKDir%\include SET LIB=C:\Program Files\Microsoft Visual Studio 8\VC\LIB;C:\Program Files\Microsoft Visual Studio 8\SDK\v2.0\lib;%PlatformSDKDir%\lib SET LIBPATH=C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727 (The PlatformSDKDir might need to be set differently depending on which version you are using. Earlier versions installed into "C:\Program Files\Microsoft SDK", while the latest versions install into version-specific locations such as "C:\Program Files\Microsoft Platform SDK for Windows Server 2003 R2".) Perl should now build using the win32/Makefile. You will need to edit that file to set CCTYPE = MSVC80 and to set CCHOME, CCINCDIR and CCLIBDIR as per the environment setup above. =item Microsoft Visual C++ Toolkit 2003 This free toolkit contains the same compiler and linker that ship with Visual C++ .NET 2003 Professional, but doesn't contain everything necessary to build Perl. You will also need to download the "Platform SDK" (the "Core SDK" and "MDAC SDK" components are required) for header files, libraries and rc.exe, and ".NET Framework SDK" for more libraries and nmake.exe. Note that the latter (which also includes the free compiler and linker) requires the ".NET Framework Redistributable" to be installed first. This can be downloaded and installed separately, but is included in the "Visual C++ Toolkit 2003" anyway. These packages can all be downloaded by searching in the Download Center at L<https://www.microsoft.com/downloads/search.aspx?displaylang=en>. (Providing exact links to these packages has proven a pointless task because the links keep on changing so often.) Try to obtain the latest version of the Windows SDK. Sometimes these packages contain a particular Windows OS version in their name, but actually work on other OS versions too. For example, the "Windows Server 2003 R2 Platform SDK" also runs on Windows XP SP2 and Windows 2000. Install the Toolkit first, then the Platform SDK, then the .NET Framework SDK. Setup your environment as follows (assuming default installation locations were chosen): SET PlatformSDKDir=C:\Program Files\Microsoft Platform SDK SET PATH=%SystemRoot%\system32;%SystemRoot%;C:\Program Files\Microsoft Visual C++ Toolkit 2003\bin;%PlatformSDKDir%\Bin;C:\Program Files\Microsoft.NET\SDK\v1.1\Bin SET INCLUDE=C:\Program Files\Microsoft Visual C++ Toolkit 2003\include;%PlatformSDKDir%\include;C:\Program Files\Microsoft Visual Studio .NET 2003\Vc7\include SET LIB=C:\Program Files\Microsoft Visual C++ Toolkit 2003\lib;%PlatformSDKDir%\lib;C:\Program Files\Microsoft Visual Studio .NET 2003\Vc7\lib (The PlatformSDKDir might need to be set differently depending on which version you are using. Earlier versions installed into "C:\Program Files\Microsoft SDK", while the latest versions install into version-specific locations such as "C:\Program Files\Microsoft Platform SDK for Windows Server 2003 R2".) Several required files will still be missing: =over 4 =item * cvtres.exe is required by link.exe when using a .res file. It is actually installed by the .NET Framework SDK, but into a location such as the following: C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322 Copy it from there to %PlatformSDKDir%\Bin =item * lib.exe is normally used to build libraries, but link.exe with the /lib option also works, so change win32/config.vc to use it instead: Change the line reading: ar='lib' to: ar='link /lib' It may also be useful to create a batch file called lib.bat in C:\Program Files\Microsoft Visual C++ Toolkit 2003\bin containing: @echo off link /lib %* for the benefit of any naughty C extension modules that you might want to build later which explicitly reference "lib" rather than taking their value from $Config{ar}. =item * setargv.obj is required to build perlglob.exe (and perl.exe if the USE_SETARGV option is enabled). The Platform SDK supplies this object file in source form in %PlatformSDKDir%\src\crt. Copy setargv.c, cruntime.h and internal.h from there to some temporary location and build setargv.obj using cl.exe /c /I. /D_CRTBLD setargv.c Then copy setargv.obj to %PlatformSDKDir%\lib Alternatively, if you don't need perlglob.exe and don't need to enable the USE_SETARGV option then you can safely just remove all mention of $(GLOBEXE) from win32/Makefile and setargv.obj won't be required anyway. =back Perl should now build using the win32/Makefile. You will need to edit that file to set CCTYPE = MSVC70FREE and to set CCHOME, CCINCDIR and CCLIBDIR as per the environment setup above. =item Microsoft Platform SDK 64-bit Compiler The nmake that comes with the Platform SDK will suffice for building Perl. Make sure you are building within one of the "Build Environment" shells available after you install the Platform SDK from the Start Menu. =item GCC Perl can be compiled with gcc from MinGW (version 3.4.5 or later) or from MinGW64 (version 4.4.3 or later). It can be downloaded here: L<http://www.mingw.org/> L<http://www.mingw-w64.org/> You also need dmake or gmake. See L</"Make"> above on how to get it. Note that the MinGW build currently requires a MinGW runtime version earlier than 3.21 (check __MINGW32_MAJOR_VERSION and __MINGW32_MINOR_VERSION). Note also that the C++ mode build currently fails with MinGW 3.4.5 and 4.7.2 or later, and with MinGW64 64-bit 6.3.0 or later. =item Intel C++ Compiler Experimental support for using Intel C++ Compiler has been added. Edit win32/Makefile and pick the correct CCTYPE for the Visual C that Intel C was installed into. Also uncomment __ICC to enable Intel C on Visual C support. To set up the build environment, from the Start Menu run IA-32 Visual Studio 20__ mode or Intel 64 Visual Studio 20__ mode as appropriate. Then run nmake as usually in that prompt box. Only Intel C++ Compiler v12.1 has been tested. Other versions probably will work. Using Intel C++ Compiler instead of Visual C has the benefit of C99 compatibility which is needed by some CPAN XS modules, while maintaining compatibility with Visual C object code and Visual C debugging infrastructure unlike GCC. =back =head2 Building =over 4 =item * Make sure you are in the "win32" subdirectory under the perl toplevel. This directory contains a "Makefile" that will work with versions of nmake that come with Visual C++ or the Windows SDK, and a GNU make "GNUmakefile" or dmake "makefile.mk" that will work for all supported compilers. The defaults in the gmake and dmake makefile are setup to build using MinGW/gcc. =item * Edit the GNUmakefile, makefile.mk (or Makefile, if you're using nmake) and change the values of INST_DRV and INST_TOP. You can also enable various build flags. These are explained in the makefiles. Note that it is generally not a good idea to try to build a perl with INST_DRV and INST_TOP set to a path that already exists from a previous build. In particular, this may cause problems with the lib/ExtUtils/t/Embed.t test, which attempts to build a test program and may end up building against the installed perl's lib/CORE directory rather than the one being tested. You will have to make sure that CCTYPE is set correctly and that CCHOME points to wherever you installed your compiler. For GCC this should be the directory that contains the F<bin>, F<include> and F<lib> directories. If building with the cross-compiler provided by mingw-w64.org you'll need to uncomment the line that sets GCCCROSS in the makefile.mk. Do this only if it's the cross-compiler - ie only if the bin folder doesn't contain a gcc.exe. (The cross-compiler does not provide a gcc.exe, g++.exe, ar.exe, etc. Instead, all of these executables are prefixed with 'x86_64-w64-mingw32-'.) The default value for CCHOME in the makefiles for Visual C++ may not be correct for some versions. Make sure the default exists and is valid. If you want build some core extensions statically into perl's dll, specify them in the STATIC_EXT macro. Be sure to read the instructions near the top of the makefiles carefully. =item * Type "dmake" ("gmake" for GNU make, or "nmake" if you are using that make). This should build everything. Specifically, it will create perl.exe, perl532.dll at the perl toplevel, and various other extension dll's under the lib\auto directory. If the build fails for any reason, make sure you have done the previous steps correctly. To try dmake's parallel mode, type "dmake -P2", where 2, is the maximum number of parallel jobs you want to run. A number of things in the build process will run in parallel, but there are serialization points where you will see just 1 CPU maxed out. This is normal. Similarly you can build in parallel with GNU make, type "gmake -j2" to build with two parallel jobs, or higher for more. If you are advanced enough with building C code, here is a suggestion to speed up building perl, and the later C<make test>. Try to keep your PATH environmental variable with the least number of folders possible (remember to keep your C compiler's folders there). C<C:\WINDOWS\system32> or C<C:\WINNT\system32> depending on your OS version should be first folder in PATH, since "cmd.exe" is the most commonly launched program during the build and later testing. =back =head2 Testing Perl on Windows Type "dmake test" (or "gmake test", "nmake test"). This will run most of the tests from the testsuite (many tests will be skipped). There should be no test failures. If you build with Visual C++ 2013 then three tests currently may fail with Daylight Saving Time related problems: F<t/io/fs.t>, F<cpan/HTTP-Tiny/t/110_mirror.t> and F<lib/File/Copy.t>. The failures are caused by bugs in the CRT in VC++ 2013 which are fixed in VC++2015 and later, as explained by Microsoft here: L<https://connect.microsoft.com/VisualStudio/feedback/details/811534/utime-sometimes-fails-to-set-the-correct-file-times-in-visual-c-2013>. In the meantime, if you need fixed C<stat> and C<utime> functions then have a look at the CPAN distribution Win32::UTCFileTime. If you build with Visual C++ 2015 or later then F<ext/XS-APItest/t/locale.t> may crash (after all its tests have passed). This is due to a regression in the Universal CRT introduced in the Windows 10 April 2018 Update, and will be fixed in the May 2019 Update, as explained here: L<https://developercommunity.visualstudio.com/content/problem/519486/setlocalelc-numeric-iso-latin-16-fails-then-succee.html>. If you build with certain versions (e.g. 4.8.1) of gcc from www.mingw.org then F<ext/POSIX/t/time.t> may fail test 17 due to a known bug in those gcc builds: see L<https://sourceforge.net/p/mingw/bugs/2152/>. Some test failures may occur if you use a command shell other than the native "cmd.exe", or if you are building from a path that contains spaces. So don't do that. If you are running the tests from a emacs shell window, you may see failures in op/stat.t. Run "dmake test-notty" in that case. Furthermore, you should make sure that during C<make test> you do not have any GNU tool packages in your path: some toolkits like Unixutils include some tools (C<type> for instance) which override the Windows ones and makes tests fail. Remove them from your path while testing to avoid these errors. To see the output of specific failing tests run the harness from the t directory: # assuming you're starting from the win32 directory cd ..\win32 .\perl harness <list of tests> Please report any other failures as described under L</BUGS AND CAVEATS>. =head2 Installation of Perl on Windows Type "dmake install" (or "gmake install", "nmake install"). This will put the newly built perl and the libraries under whatever C<INST_TOP> points to in the Makefile. It will also install the pod documentation under C<$INST_TOP\$INST_VER\lib\pod> and HTML versions of the same under C<$INST_TOP\$INST_VER\lib\pod\html>. To use the Perl you just installed you will need to add a new entry to your PATH environment variable: C<$INST_TOP\bin>, e.g. set PATH=c:\perl\bin;%PATH% If you opted to uncomment C<INST_VER> and C<INST_ARCH> in the makefile then the installation structure is a little more complicated and you will need to add two new PATH components instead: C<$INST_TOP\$INST_VER\bin> and C<$INST_TOP\$INST_VER\bin\$ARCHNAME>, e.g. set PATH=c:\perl\5.6.0\bin;c:\perl\5.6.0\bin\MSWin32-x86;%PATH% =head2 Usage Hints for Perl on Windows =over 4 =item Environment Variables The installation paths that you set during the build get compiled into perl, so you don't have to do anything additional to start using that perl (except add its location to your PATH variable). If you put extensions in unusual places, you can set PERL5LIB to a list of paths separated by semicolons where you want perl to look for libraries. Look for descriptions of other environment variables you can set in L<perlrun>. You can also control the shell that perl uses to run system() and backtick commands via PERL5SHELL. See L<perlrun>. Perl does not depend on the registry, but it can look up certain default values if you choose to put them there unless disabled at build time with USE_NO_REGISTRY. On Perl process start Perl checks if C<HKEY_CURRENT_USER\Software\Perl> and C<HKEY_LOCAL_MACHINE\Software\Perl> exist. If the keys exists, they will be checked for remainder of the Perl process's run life for certain entries. Entries in C<HKEY_CURRENT_USER\Software\Perl> override entries in C<HKEY_LOCAL_MACHINE\Software\Perl>. One or more of the following entries (of type REG_SZ or REG_EXPAND_SZ) may be set in the keys: lib-$] version-specific standard library path to add to @INC lib standard library path to add to @INC sitelib-$] version-specific site library path to add to @INC sitelib site library path to add to @INC vendorlib-$] version-specific vendor library path to add to @INC vendorlib vendor library path to add to @INC PERL* fallback for all %ENV lookups that begin with "PERL" Note the C<$]> in the above is not literal. Substitute whatever version of perl you want to honor that entry, e.g. C<5.6.0>. Paths must be separated with semicolons, as usual on Windows. =item File Globbing By default, perl handles file globbing using the File::Glob extension, which provides portable globbing. If you want perl to use globbing that emulates the quirks of DOS filename conventions, you might want to consider using File::DosGlob to override the internal glob() implementation. See L<File::DosGlob> for details. =item Using perl from the command line If you are accustomed to using perl from various command-line shells found in UNIX environments, you will be less than pleased with what Windows offers by way of a command shell. The crucial thing to understand about the Windows environment is that the command line you type in is processed twice before Perl sees it. First, your command shell (usually CMD.EXE) preprocesses the command line, to handle redirection, environment variable expansion, and location of the executable to run. Then, the perl executable splits the remaining command line into individual arguments, using the C runtime library upon which Perl was built. It is particularly important to note that neither the shell nor the C runtime do any wildcard expansions of command-line arguments (so wildcards need not be quoted). Also, the quoting behaviours of the shell and the C runtime are rudimentary at best (and may, if you are using a non-standard shell, be inconsistent). The only (useful) quote character is the double quote ("). It can be used to protect spaces and other special characters in arguments. The Windows documentation describes the shell parsing rules here: L<https://docs.microsoft.com/en-us/windows-server/administration/windows-commands/cmd> and the C runtime parsing rules here: L<https://msdn.microsoft.com/en-us/library/17w5ykft%28v=VS.100%29.aspx>. Here are some further observations based on experiments: The C runtime breaks arguments at spaces and passes them to programs in argc/argv. Double quotes can be used to prevent arguments with spaces in them from being split up. You can put a double quote in an argument by escaping it with a backslash and enclosing the whole argument within double quotes. The backslash and the pair of double quotes surrounding the argument will be stripped by the C runtime. The file redirection characters "E<lt>", "E<gt>", and "|" can be quoted by double quotes (although there are suggestions that this may not always be true). Single quotes are not treated as quotes by the shell or the C runtime, they don't get stripped by the shell (just to make this type of quoting completely useless). The caret "^" has also been observed to behave as a quoting character, but this appears to be a shell feature, and the caret is not stripped from the command line, so Perl still sees it (and the C runtime phase does not treat the caret as a quote character). Here are some examples of usage of the "cmd" shell: This prints two doublequotes: perl -e "print '\"\"' " This does the same: perl -e "print \"\\\"\\\"\" " This prints "bar" and writes "foo" to the file "blurch": perl -e "print 'foo'; print STDERR 'bar'" > blurch This prints "foo" ("bar" disappears into nowhereland): perl -e "print 'foo'; print STDERR 'bar'" 2> nul This prints "bar" and writes "foo" into the file "blurch": perl -e "print 'foo'; print STDERR 'bar'" 1> blurch This pipes "foo" to the "less" pager and prints "bar" on the console: perl -e "print 'foo'; print STDERR 'bar'" | less This pipes "foo\nbar\n" to the less pager: perl -le "print 'foo'; print STDERR 'bar'" 2>&1 | less This pipes "foo" to the pager and writes "bar" in the file "blurch": perl -e "print 'foo'; print STDERR 'bar'" 2> blurch | less Discovering the usefulness of the "command.com" shell on Windows 9x is left as an exercise to the reader :) One particularly pernicious problem with the 4NT command shell for Windows is that it (nearly) always treats a % character as indicating that environment variable expansion is needed. Under this shell, it is therefore important to always double any % characters which you want Perl to see (for example, for hash variables), even when they are quoted. =item Building Extensions The Comprehensive Perl Archive Network (CPAN) offers a wealth of extensions, some of which require a C compiler to build. Look in L<https://www.cpan.org/> for more information on CPAN. Note that not all of the extensions available from CPAN may work in the Windows environment; you should check the information at L<https://www.cpantesters.org/> before investing too much effort into porting modules that don't readily build. Most extensions (whether they require a C compiler or not) can be built, tested and installed with the standard mantra: perl Makefile.PL $MAKE $MAKE test $MAKE install where $MAKE is whatever 'make' program you have configured perl to use. Use "perl -V:make" to find out what this is. Some extensions may not provide a testsuite (so "$MAKE test" may not do anything or fail), but most serious ones do. It is important that you use a supported 'make' program, and ensure Config.pm knows about it. If you don't have nmake, you can either get dmake from the location mentioned earlier or get an old version of nmake reportedly available from: L<http://download.microsoft.com/download/vc15/Patch/1.52/W95/EN-US/nmake15.exe> Another option is to use the make written in Perl, available from CPAN. L<https://www.cpan.org/modules/by-module/Make/> You may also use dmake or gmake. See L</"Make"> above on how to get it. Note that MakeMaker actually emits makefiles with different syntax depending on what 'make' it thinks you are using. Therefore, it is important that one of the following values appears in Config.pm: make='nmake' # MakeMaker emits nmake syntax make='dmake' # MakeMaker emits dmake syntax any other value # MakeMaker emits generic make syntax (e.g GNU make, or Perl make) If the value doesn't match the 'make' program you want to use, edit Config.pm to fix it. If a module implements XSUBs, you will need one of the supported C compilers. You must make sure you have set up the environment for the compiler for command-line compilation before running C<perl Makefile.PL> or any invocation of make. If a module does not build for some reason, look carefully for why it failed, and report problems to the module author. If it looks like the extension building support is at fault, report that with full details of how the build failed using the GitHub issue tracker at L<https://github.com/Perl/perl5/issues>. =item Command-line Wildcard Expansion The default command shells on DOS descendant operating systems (such as they are) usually do not expand wildcard arguments supplied to programs. They consider it the application's job to handle that. This is commonly achieved by linking the application (in our case, perl) with startup code that the C runtime libraries usually provide. However, doing that results in incompatible perl versions (since the behavior of the argv expansion code differs depending on the compiler, and it is even buggy on some compilers). Besides, it may be a source of frustration if you use such a perl binary with an alternate shell that *does* expand wildcards. Instead, the following solution works rather well. The nice things about it are 1) you can start using it right away; 2) it is more powerful, because it will do the right thing with a pattern like */*/*.c; 3) you can decide whether you do/don't want to use it; and 4) you can extend the method to add any customizations (or even entirely different kinds of wildcard expansion). C:\> copy con c:\perl\lib\Wild.pm # Wild.pm - emulate shell @ARGV expansion on shells that don't use File::DosGlob; @ARGV = map { my @g = File::DosGlob::glob($_) if /[*?]/; @g ? @g : $_; } @ARGV; 1; ^Z C:\> set PERL5OPT=-MWild C:\> perl -le "for (@ARGV) { print }" */*/perl*.c p4view/perl/perl.c p4view/perl/perlio.c p4view/perl/perly.c perl5.005/win32/perlglob.c perl5.005/win32/perllib.c perl5.005/win32/perlglob.c perl5.005/win32/perllib.c perl5.005/win32/perlglob.c perl5.005/win32/perllib.c Note there are two distinct steps there: 1) You'll have to create Wild.pm and put it in your perl lib directory. 2) You'll need to set the PERL5OPT environment variable. If you want argv expansion to be the default, just set PERL5OPT in your default startup environment. If you are using the Visual C compiler, you can get the C runtime's command line wildcard expansion built into perl binary. The resulting binary will always expand unquoted command lines, which may not be what you want if you use a shell that does that for you. The expansion done is also somewhat less powerful than the approach suggested above. =item Notes on 64-bit Windows Windows .NET Server supports the LLP64 data model on the Intel Itanium architecture. The LLP64 data model is different from the LP64 data model that is the norm on 64-bit Unix platforms. In the former, C<int> and C<long> are both 32-bit data types, while pointers are 64 bits wide. In addition, there is a separate 64-bit wide integral type, C<__int64>. In contrast, the LP64 data model that is pervasive on Unix platforms provides C<int> as the 32-bit type, while both the C<long> type and pointers are of 64-bit precision. Note that both models provide for 64-bits of addressability. 64-bit Windows running on Itanium is capable of running 32-bit x86 binaries transparently. This means that you could use a 32-bit build of Perl on a 64-bit system. Given this, why would one want to build a 64-bit build of Perl? Here are some reasons why you would bother: =over =item * A 64-bit native application will run much more efficiently on Itanium hardware. =item * There is no 2GB limit on process size. =item * Perl automatically provides large file support when built under 64-bit Windows. =item * Embedding Perl inside a 64-bit application. =back =back =head2 Running Perl Scripts Perl scripts on UNIX use the "#!" (a.k.a "shebang") line to indicate to the OS that it should execute the file using perl. Windows has no comparable means to indicate arbitrary files are executables. Instead, all available methods to execute plain text files on Windows rely on the file "extension". There are three methods to use this to execute perl scripts: =over 8 =item 1 There is a facility called "file extension associations". This can be manipulated via the two commands "assoc" and "ftype" that come standard with Windows. Type "ftype /?" for a complete example of how to set this up for perl scripts (Say what? You thought Windows wasn't perl-ready? :). =item 2 Since file associations don't work everywhere, and there are reportedly bugs with file associations where it does work, the old method of wrapping the perl script to make it look like a regular batch file to the OS, may be used. The install process makes available the "pl2bat.bat" script which can be used to wrap perl scripts into batch files. For example: pl2bat foo.pl will create the file "FOO.BAT". Note "pl2bat" strips any .pl suffix and adds a .bat suffix to the generated file. If you use the 4DOS/NT or similar command shell, note that "pl2bat" uses the "%*" variable in the generated batch file to refer to all the command line arguments, so you may need to make sure that construct works in batch files. As of this writing, 4DOS/NT users will need a "ParameterChar = *" statement in their 4NT.INI file or will need to execute "setdos /p*" in the 4DOS/NT startup file to enable this to work. =item 3 Using "pl2bat" has a few problems: the file name gets changed, so scripts that rely on C<$0> to find what they must do may not run properly; running "pl2bat" replicates the contents of the original script, and so this process can be maintenance intensive if the originals get updated often. A different approach that avoids both problems is possible. A script called "runperl.bat" is available that can be copied to any filename (along with the .bat suffix). For example, if you call it "foo.bat", it will run the file "foo" when it is executed. Since you can run batch files on Windows platforms simply by typing the name (without the extension), this effectively runs the file "foo", when you type either "foo" or "foo.bat". With this method, "foo.bat" can even be in a different location than the file "foo", as long as "foo" is available somewhere on the PATH. If your scripts are on a filesystem that allows symbolic links, you can even avoid copying "runperl.bat". Here's a diversion: copy "runperl.bat" to "runperl", and type "runperl". Explain the observed behavior, or lack thereof. :) Hint: .gnidnats llits er'uoy fi ,"lrepnur" eteled :tniH =back =head2 Miscellaneous Things A full set of HTML documentation is installed, so you should be able to use it if you have a web browser installed on your system. C<perldoc> is also a useful tool for browsing information contained in the documentation, especially in conjunction with a pager like C<less> (recent versions of which have Windows support). You may have to set the PAGER environment variable to use a specific pager. "perldoc -f foo" will print information about the perl operator "foo". One common mistake when using this port with a GUI library like C<Tk> is assuming that Perl's normal behavior of opening a command-line window will go away. This isn't the case. If you want to start a copy of C<perl> without opening a command-line window, use the C<wperl> executable built during the installation process. Usage is exactly the same as normal C<perl> on Windows, except that options like C<-h> don't work (since they need a command-line window to print to). If you find bugs in perl, you can report them to L<https://github.com/Perl/perl5/issues>. =head1 BUGS AND CAVEATS Norton AntiVirus interferes with the build process, particularly if set to "AutoProtect, All Files, when Opened". Unlike large applications the perl build process opens and modifies a lot of files. Having the AntiVirus scan each and every one slows build the process significantly. Worse, with PERLIO=stdio the build process fails with peculiar messages as the virus checker interacts badly with miniperl.exe writing configure files (it seems to either catch file part written and treat it as suspicious, or virus checker may have it "locked" in a way which inhibits miniperl updating it). The build does complete with set PERLIO=perlio but that may be just luck. Other AntiVirus software may have similar issues. A git GUI shell extension for Windows such as TortoiseGit will cause the build and later C<make test> to run much slower since every file is checked for its git status as soon as it is created and/or modified. TortoiseGit doesn't cause any test failures or build problems unlike the antivirus software described above, but it does cause similar slowness. It is suggested to use Task Manager to look for background processes which use high CPU amounts during the building process. Some of the built-in functions do not act exactly as documented in L<perlfunc>, and a few are not implemented at all. To avoid surprises, particularly if you have had prior exposure to Perl in other operating environments or if you intend to write code that will be portable to other environments, see L<perlport> for a reasonably definitive list of these differences. Not all extensions available from CPAN may build or work properly in the Windows environment. See L</"Building Extensions">. Most C<socket()> related calls are supported, but they may not behave as on Unix platforms. See L<perlport> for the full list. Signal handling may not behave as on Unix platforms (where it doesn't exactly "behave", either :). For instance, calling C<die()> or C<exit()> from signal handlers will cause an exception, since most implementations of C<signal()> on Windows are severely crippled. Thus, signals may work only for simple things like setting a flag variable in the handler. Using signals under this port should currently be considered unsupported. Please report detailed descriptions of any problems and solutions that you may find at E<lt>L<https://github.com/Perl/perl5/issues>E<gt>, along with the output produced by C<perl -V>. =head1 ACKNOWLEDGEMENTS The use of a camel with the topic of Perl is a trademark of O'Reilly and Associates, Inc. Used with permission. =head1 AUTHORS =over 4 =item Gary Ng E<lt>71564.1743@CompuServe.COME<gt> =item Gurusamy Sarathy E<lt>gsar@activestate.comE<gt> =item Nick Ing-Simmons E<lt>nick@ing-simmons.netE<gt> =item Jan Dubois E<lt>jand@activestate.comE<gt> =item Steve Hay E<lt>steve.m.hay@googlemail.comE<gt> =back This document is maintained by Jan Dubois. =head1 SEE ALSO L<perl> =head1 HISTORY This port was originally contributed by Gary Ng around 5.003_24, and borrowed from the Hip Communications port that was available at the time. Various people have made numerous and sundry hacks since then. GCC/mingw32 support was added in 5.005 (Nick Ing-Simmons). Support for PERL_OBJECT was added in 5.005 (ActiveState Tool Corp). Support for fork() emulation was added in 5.6 (ActiveState Tool Corp). Win9x support was added in 5.6 (Benjamin Stuhl). Support for 64-bit Windows added in 5.8 (ActiveState Corp). Last updated: 30 April 2019 =cut perl5004delta.pod 0000644 00000155660 15125556335 0007564 0 ustar 00 =head1 NAME perl5004delta - what's new for perl5.004 =head1 DESCRIPTION This document describes differences between the 5.003 release (as documented in I<Programming Perl>, second edition--the Camel Book) and this one. =head1 Supported Environments Perl5.004 builds out of the box on Unix, Plan 9, LynxOS, VMS, OS/2, QNX, AmigaOS, and Windows NT. Perl runs on Windows 95 as well, but it cannot be built there, for lack of a reasonable command interpreter. =head1 Core Changes Most importantly, many bugs were fixed, including several security problems. See the F<Changes> file in the distribution for details. =head2 List assignment to %ENV works C<%ENV = ()> and C<%ENV = @list> now work as expected (except on VMS where it generates a fatal error). =head2 Change to "Can't locate Foo.pm in @INC" error The error "Can't locate Foo.pm in @INC" now lists the contents of @INC for easier debugging. =head2 Compilation option: Binary compatibility with 5.003 There is a new Configure question that asks if you want to maintain binary compatibility with Perl 5.003. If you choose binary compatibility, you do not have to recompile your extensions, but you might have symbol conflicts if you embed Perl in another application, just as in the 5.003 release. By default, binary compatibility is preserved at the expense of symbol table pollution. =head2 $PERL5OPT environment variable You may now put Perl options in the $PERL5OPT environment variable. Unless Perl is running with taint checks, it will interpret this variable as if its contents had appeared on a "#!perl" line at the beginning of your script, except that hyphens are optional. PERL5OPT may only be used to set the following switches: B<-[DIMUdmw]>. =head2 Limitations on B<-M>, B<-m>, and B<-T> options The C<-M> and C<-m> options are no longer allowed on the C<#!> line of a script. If a script needs a module, it should invoke it with the C<use> pragma. The B<-T> option is also forbidden on the C<#!> line of a script, unless it was present on the Perl command line. Due to the way C<#!> works, this usually means that B<-T> must be in the first argument. Thus: #!/usr/bin/perl -T -w will probably work for an executable script invoked as C<scriptname>, while: #!/usr/bin/perl -w -T will probably fail under the same conditions. (Non-Unix systems will probably not follow this rule.) But C<perl scriptname> is guaranteed to fail, since then there is no chance of B<-T> being found on the command line before it is found on the C<#!> line. =head2 More precise warnings If you removed the B<-w> option from your Perl 5.003 scripts because it made Perl too verbose, we recommend that you try putting it back when you upgrade to Perl 5.004. Each new perl version tends to remove some undesirable warnings, while adding new warnings that may catch bugs in your scripts. =head2 Deprecated: Inherited C<AUTOLOAD> for non-methods Before Perl 5.004, C<AUTOLOAD> functions were looked up as methods (using the C<@ISA> hierarchy), even when the function to be autoloaded was called as a plain function (e.g. C<Foo::bar()>), not a method (e.g. C<< Foo->bar() >> or C<< $obj->bar() >>). Perl 5.005 will use method lookup only for methods' C<AUTOLOAD>s. However, there is a significant base of existing code that may be using the old behavior. So, as an interim step, Perl 5.004 issues an optional warning when a non-method uses an inherited C<AUTOLOAD>. The simple rule is: Inheritance will not work when autoloading non-methods. The simple fix for old code is: In any module that used to depend on inheriting C<AUTOLOAD> for non-methods from a base class named C<BaseClass>, execute C<*AUTOLOAD = \&BaseClass::AUTOLOAD> during startup. =head2 Previously deprecated %OVERLOAD is no longer usable Using %OVERLOAD to define overloading was deprecated in 5.003. Overloading is now defined using the overload pragma. %OVERLOAD is still used internally but should not be used by Perl scripts. See L<overload> for more details. =head2 Subroutine arguments created only when they're modified In Perl 5.004, nonexistent array and hash elements used as subroutine parameters are brought into existence only if they are actually assigned to (via C<@_>). Earlier versions of Perl vary in their handling of such arguments. Perl versions 5.002 and 5.003 always brought them into existence. Perl versions 5.000 and 5.001 brought them into existence only if they were not the first argument (which was almost certainly a bug). Earlier versions of Perl never brought them into existence. For example, given this code: undef @a; undef %a; sub show { print $_[0] }; sub change { $_[0]++ }; show($a[2]); change($a{b}); After this code executes in Perl 5.004, $a{b} exists but $a[2] does not. In Perl 5.002 and 5.003, both $a{b} and $a[2] would have existed (but $a[2]'s value would have been undefined). =head2 Group vector changeable with C<$)> The C<$)> special variable has always (well, in Perl 5, at least) reflected not only the current effective group, but also the group list as returned by the C<getgroups()> C function (if there is one). However, until this release, there has not been a way to call the C<setgroups()> C function from Perl. In Perl 5.004, assigning to C<$)> is exactly symmetrical with examining it: The first number in its string value is used as the effective gid; if there are any numbers after the first one, they are passed to the C<setgroups()> C function (if there is one). =head2 Fixed parsing of $$<digit>, &$<digit>, etc. Perl versions before 5.004 misinterpreted any type marker followed by "$" and a digit. For example, "$$0" was incorrectly taken to mean "${$}0" instead of "${$0}". This bug is (mostly) fixed in Perl 5.004. However, the developers of Perl 5.004 could not fix this bug completely, because at least two widely-used modules depend on the old meaning of "$$0" in a string. So Perl 5.004 still interprets "$$<digit>" in the old (broken) way inside strings; but it generates this message as a warning. And in Perl 5.005, this special treatment will cease. =head2 Fixed localization of $<digit>, $&, etc. Perl versions before 5.004 did not always properly localize the regex-related special variables. Perl 5.004 does localize them, as the documentation has always said it should. This may result in $1, $2, etc. no longer being set where existing programs use them. =head2 No resetting of $. on implicit close The documentation for Perl 5.0 has always stated that C<$.> is I<not> reset when an already-open file handle is reopened with no intervening call to C<close>. Due to a bug, perl versions 5.000 through 5.003 I<did> reset C<$.> under that circumstance; Perl 5.004 does not. =head2 C<wantarray> may return undef The C<wantarray> operator returns true if a subroutine is expected to return a list, and false otherwise. In Perl 5.004, C<wantarray> can also return the undefined value if a subroutine's return value will not be used at all, which allows subroutines to avoid a time-consuming calculation of a return value if it isn't going to be used. =head2 C<eval EXPR> determines value of EXPR in scalar context Perl (version 5) used to determine the value of EXPR inconsistently, sometimes incorrectly using the surrounding context for the determination. Now, the value of EXPR (before being parsed by eval) is always determined in a scalar context. Once parsed, it is executed as before, by providing the context that the scope surrounding the eval provided. This change makes the behavior Perl4 compatible, besides fixing bugs resulting from the inconsistent behavior. This program: @a = qw(time now is time); print eval @a; print '|', scalar eval @a; used to print something like "timenowis881399109|4", but now (and in perl4) prints "4|4". =head2 Changes to tainting checks A bug in previous versions may have failed to detect some insecure conditions when taint checks are turned on. (Taint checks are used in setuid or setgid scripts, or when explicitly turned on with the C<-T> invocation option.) Although it's unlikely, this may cause a previously-working script to now fail, which should be construed as a blessing since that indicates a potentially-serious security hole was just plugged. The new restrictions when tainting include: =over 4 =item No glob() or <*> These operators may spawn the C shell (csh), which cannot be made safe. This restriction will be lifted in a future version of Perl when globbing is implemented without the use of an external program. =item No spawning if tainted $CDPATH, $ENV, $BASH_ENV These environment variables may alter the behavior of spawned programs (especially shells) in ways that subvert security. So now they are treated as dangerous, in the manner of $IFS and $PATH. =item No spawning if tainted $TERM doesn't look like a terminal name Some termcap libraries do unsafe things with $TERM. However, it would be unnecessarily harsh to treat all $TERM values as unsafe, since only shell metacharacters can cause trouble in $TERM. So a tainted $TERM is considered to be safe if it contains only alphanumerics, underscores, dashes, and colons, and unsafe if it contains other characters (including whitespace). =back =head2 New Opcode module and revised Safe module A new Opcode module supports the creation, manipulation and application of opcode masks. The revised Safe module has a new API and is implemented using the new Opcode module. Please read the new Opcode and Safe documentation. =head2 Embedding improvements In older versions of Perl it was not possible to create more than one Perl interpreter instance inside a single process without leaking like a sieve and/or crashing. The bugs that caused this behavior have all been fixed. However, you still must take care when embedding Perl in a C program. See the updated perlembed manpage for tips on how to manage your interpreters. =head2 Internal change: FileHandle class based on IO::* classes File handles are now stored internally as type IO::Handle. The FileHandle module is still supported for backwards compatibility, but it is now merely a front end to the IO::* modules, specifically IO::Handle, IO::Seekable, and IO::File. We suggest, but do not require, that you use the IO::* modules in new code. In harmony with this change, C<*GLOB{FILEHANDLE}> is now just a backward-compatible synonym for C<*GLOB{IO}>. =head2 Internal change: PerlIO abstraction interface It is now possible to build Perl with AT&T's sfio IO package instead of stdio. See L<perlapio> for more details, and the F<INSTALL> file for how to use it. =head2 New and changed syntax =over 4 =item $coderef->(PARAMS) A subroutine reference may now be suffixed with an arrow and a (possibly empty) parameter list. This syntax denotes a call of the referenced subroutine, with the given parameters (if any). This new syntax follows the pattern of S<C<< $hashref->{FOO} >>> and S<C<< $aryref->[$foo] >>>: You may now write S<C<&$subref($foo)>> as S<C<< $subref->($foo) >>>. All these arrow terms may be chained; thus, S<C<< &{$table->{FOO}}($bar) >>> may now be written S<C<< $table->{FOO}->($bar) >>>. =back =head2 New and changed builtin constants =over 4 =item __PACKAGE__ The current package name at compile time, or the undefined value if there is no current package (due to a C<package;> directive). Like C<__FILE__> and C<__LINE__>, C<__PACKAGE__> does I<not> interpolate into strings. =back =head2 New and changed builtin variables =over 4 =item $^E Extended error message on some platforms. (Also known as $EXTENDED_OS_ERROR if you C<use English>). =item $^H The current set of syntax checks enabled by C<use strict>. See the documentation of C<strict> for more details. Not actually new, but newly documented. Because it is intended for internal use by Perl core components, there is no C<use English> long name for this variable. =item $^M By default, running out of memory it is not trappable. However, if compiled for this, Perl may use the contents of C<$^M> as an emergency pool after die()ing with this message. Suppose that your Perl were compiled with -DPERL_EMERGENCY_SBRK and used Perl's malloc. Then $^M = 'a' x (1<<16); would allocate a 64K buffer for use when in emergency. See the F<INSTALL> file for information on how to enable this option. As a disincentive to casual use of this advanced feature, there is no C<use English> long name for this variable. =back =head2 New and changed builtin functions =over 4 =item delete on slices This now works. (e.g. C<delete @ENV{'PATH', 'MANPATH'}>) =item flock is now supported on more platforms, prefers fcntl to lockf when emulating, and always flushes before (un)locking. =item printf and sprintf Perl now implements these functions itself; it doesn't use the C library function sprintf() any more, except for floating-point numbers, and even then only known flags are allowed. As a result, it is now possible to know which conversions and flags will work, and what they will do. The new conversions in Perl's sprintf() are: %i a synonym for %d %p a pointer (the address of the Perl value, in hexadecimal) %n special: *stores* the number of characters output so far into the next variable in the parameter list The new flags that go between the C<%> and the conversion are: # prefix octal with "0", hex with "0x" h interpret integer as C type "short" or "unsigned short" V interpret integer as Perl's standard integer type Also, where a number would appear in the flags, an asterisk ("*") may be used instead, in which case Perl uses the next item in the parameter list as the given number (that is, as the field width or precision). If a field width obtained through "*" is negative, it has the same effect as the '-' flag: left-justification. See L<perlfunc/sprintf> for a complete list of conversion and flags. =item keys as an lvalue As an lvalue, C<keys> allows you to increase the number of hash buckets allocated for the given hash. This can gain you a measure of efficiency if you know the hash is going to get big. (This is similar to pre-extending an array by assigning a larger number to $#array.) If you say keys %hash = 200; then C<%hash> will have at least 200 buckets allocated for it. These buckets will be retained even if you do C<%hash = ()>; use C<undef %hash> if you want to free the storage while C<%hash> is still in scope. You can't shrink the number of buckets allocated for the hash using C<keys> in this way (but you needn't worry about doing this by accident, as trying has no effect). =item my() in Control Structures You can now use my() (with or without the parentheses) in the control expressions of control structures such as: while (defined(my $line = <>)) { $line = lc $line; } continue { print $line; } if ((my $answer = <STDIN>) =~ /^y(es)?$/i) { user_agrees(); } elsif ($answer =~ /^n(o)?$/i) { user_disagrees(); } else { chomp $answer; die "`$answer' is neither `yes' nor `no'"; } Also, you can declare a foreach loop control variable as lexical by preceding it with the word "my". For example, in: foreach my $i (1, 2, 3) { some_function(); } $i is a lexical variable, and the scope of $i extends to the end of the loop, but not beyond it. Note that you still cannot use my() on global punctuation variables such as $_ and the like. =item pack() and unpack() A new format 'w' represents a BER compressed integer (as defined in ASN.1). Its format is a sequence of one or more bytes, each of which provides seven bits of the total value, with the most significant first. Bit eight of each byte is set, except for the last byte, in which bit eight is clear. If 'p' or 'P' are given undef as values, they now generate a NULL pointer. Both pack() and unpack() now fail when their templates contain invalid types. (Invalid types used to be ignored.) =item sysseek() The new sysseek() operator is a variant of seek() that sets and gets the file's system read/write position, using the lseek(2) system call. It is the only reliable way to seek before using sysread() or syswrite(). Its return value is the new position, or the undefined value on failure. =item use VERSION If the first argument to C<use> is a number, it is treated as a version number instead of a module name. If the version of the Perl interpreter is less than VERSION, then an error message is printed and Perl exits immediately. Because C<use> occurs at compile time, this check happens immediately during the compilation process, unlike C<require VERSION>, which waits until runtime for the check. This is often useful if you need to check the current Perl version before C<use>ing library modules which have changed in incompatible ways from older versions of Perl. (We try not to do this more than we have to.) =item use Module VERSION LIST If the VERSION argument is present between Module and LIST, then the C<use> will call the VERSION method in class Module with the given version as an argument. The default VERSION method, inherited from the UNIVERSAL class, croaks if the given version is larger than the value of the variable $Module::VERSION. (Note that there is not a comma after VERSION!) This version-checking mechanism is similar to the one currently used in the Exporter module, but it is faster and can be used with modules that don't use the Exporter. It is the recommended method for new code. =item prototype(FUNCTION) Returns the prototype of a function as a string (or C<undef> if the function has no prototype). FUNCTION is a reference to or the name of the function whose prototype you want to retrieve. (Not actually new; just never documented before.) =item srand The default seed for C<srand>, which used to be C<time>, has been changed. Now it's a heady mix of difficult-to-predict system-dependent values, which should be sufficient for most everyday purposes. Previous to version 5.004, calling C<rand> without first calling C<srand> would yield the same sequence of random numbers on most or all machines. Now, when perl sees that you're calling C<rand> and haven't yet called C<srand>, it calls C<srand> with the default seed. You should still call C<srand> manually if your code might ever be run on a pre-5.004 system, of course, or if you want a seed other than the default. =item $_ as Default Functions documented in the Camel to default to $_ now in fact do, and all those that do are so documented in L<perlfunc>. =item C<m//gc> does not reset search position on failure The C<m//g> match iteration construct has always reset its target string's search position (which is visible through the C<pos> operator) when a match fails; as a result, the next C<m//g> match after a failure starts again at the beginning of the string. With Perl 5.004, this reset may be disabled by adding the "c" (for "continue") modifier, i.e. C<m//gc>. This feature, in conjunction with the C<\G> zero-width assertion, makes it possible to chain matches together. See L<perlop> and L<perlre>. =item C<m//x> ignores whitespace before ?*+{} The C<m//x> construct has always been intended to ignore all unescaped whitespace. However, before Perl 5.004, whitespace had the effect of escaping repeat modifiers like "*" or "?"; for example, C</a *b/x> was (mis)interpreted as C</a\*b/x>. This bug has been fixed in 5.004. =item nested C<sub{}> closures work now Prior to the 5.004 release, nested anonymous functions didn't work right. They do now. =item formats work right on changing lexicals Just like anonymous functions that contain lexical variables that change (like a lexical index variable for a C<foreach> loop), formats now work properly. For example, this silently failed before (printed only zeros), but is fine now: my $i; foreach $i ( 1 .. 10 ) { write; } format = my i is @# $i . However, it still fails (without a warning) if the foreach is within a subroutine: my $i; sub foo { foreach $i ( 1 .. 10 ) { write; } } foo; format = my i is @# $i . =back =head2 New builtin methods The C<UNIVERSAL> package automatically contains the following methods that are inherited by all other classes: =over 4 =item isa(CLASS) C<isa> returns I<true> if its object is blessed into a subclass of C<CLASS> C<isa> is also exportable and can be called as a sub with two arguments. This allows the ability to check what a reference points to. Example: use UNIVERSAL qw(isa); if(isa($ref, 'ARRAY')) { ... } =item can(METHOD) C<can> checks to see if its object has a method called C<METHOD>, if it does then a reference to the sub is returned; if it does not then I<undef> is returned. =item VERSION( [NEED] ) C<VERSION> returns the version number of the class (package). If the NEED argument is given then it will check that the current version (as defined by the $VERSION variable in the given package) not less than NEED; it will die if this is not the case. This method is normally called as a class method. This method is called automatically by the C<VERSION> form of C<use>. use A 1.2 qw(some imported subs); # implies: A->VERSION(1.2); =back B<NOTE:> C<can> directly uses Perl's internal code for method lookup, and C<isa> uses a very similar method and caching strategy. This may cause strange effects if the Perl code dynamically changes @ISA in any package. You may add other methods to the UNIVERSAL class via Perl or XS code. You do not need to C<use UNIVERSAL> in order to make these methods available to your program. This is necessary only if you wish to have C<isa> available as a plain subroutine in the current package. =head2 TIEHANDLE now supported See L<perltie> for other kinds of tie()s. =over 4 =item TIEHANDLE classname, LIST This is the constructor for the class. That means it is expected to return an object of some sort. The reference can be used to hold some internal information. sub TIEHANDLE { print "<shout>\n"; my $i; return bless \$i, shift; } =item PRINT this, LIST This method will be triggered every time the tied handle is printed to. Beyond its self reference it also expects the list that was passed to the print function. sub PRINT { $r = shift; $$r++; return print join( $, => map {uc} @_), $\; } =item PRINTF this, LIST This method will be triggered every time the tied handle is printed to with the C<printf()> function. Beyond its self reference it also expects the format and list that was passed to the printf function. sub PRINTF { shift; my $fmt = shift; print sprintf($fmt, @_)."\n"; } =item READ this LIST This method will be called when the handle is read from via the C<read> or C<sysread> functions. sub READ { $r = shift; my($buf,$len,$offset) = @_; print "READ called, \$buf=$buf, \$len=$len, \$offset=$offset"; } =item READLINE this This method will be called when the handle is read from. The method should return undef when there is no more data. sub READLINE { $r = shift; return "PRINT called $$r times\n" } =item GETC this This method will be called when the C<getc> function is called. sub GETC { print "Don't GETC, Get Perl"; return "a"; } =item DESTROY this As with the other types of ties, this method will be called when the tied handle is about to be destroyed. This is useful for debugging and possibly for cleaning up. sub DESTROY { print "</shout>\n"; } =back =head2 Malloc enhancements If perl is compiled with the malloc included with the perl distribution (that is, if C<perl -V:d_mymalloc> is 'define') then you can print memory statistics at runtime by running Perl thusly: env PERL_DEBUG_MSTATS=2 perl your_script_here The value of 2 means to print statistics after compilation and on exit; with a value of 1, the statistics are printed only on exit. (If you want the statistics at an arbitrary time, you'll need to install the optional module Devel::Peek.) Three new compilation flags are recognized by malloc.c. (They have no effect if perl is compiled with system malloc().) =over 4 =item -DPERL_EMERGENCY_SBRK If this macro is defined, running out of memory need not be a fatal error: a memory pool can allocated by assigning to the special variable C<$^M>. See L</"$^M">. =item -DPACK_MALLOC Perl memory allocation is by bucket with sizes close to powers of two. Because of these malloc overhead may be big, especially for data of size exactly a power of two. If C<PACK_MALLOC> is defined, perl uses a slightly different algorithm for small allocations (up to 64 bytes long), which makes it possible to have overhead down to 1 byte for allocations which are powers of two (and appear quite often). Expected memory savings (with 8-byte alignment in C<alignbytes>) is about 20% for typical Perl usage. Expected slowdown due to additional malloc overhead is in fractions of a percent (hard to measure, because of the effect of saved memory on speed). =item -DTWO_POT_OPTIMIZE Similarly to C<PACK_MALLOC>, this macro improves allocations of data with size close to a power of two; but this works for big allocations (starting with 16K by default). Such allocations are typical for big hashes and special-purpose scripts, especially image processing. On recent systems, the fact that perl requires 2M from system for 1M allocation will not affect speed of execution, since the tail of such a chunk is not going to be touched (and thus will not require real memory). However, it may result in a premature out-of-memory error. So if you will be manipulating very large blocks with sizes close to powers of two, it would be wise to define this macro. Expected saving of memory is 0-100% (100% in applications which require most memory in such 2**n chunks); expected slowdown is negligible. =back =head2 Miscellaneous efficiency enhancements Functions that have an empty prototype and that do nothing but return a fixed value are now inlined (e.g. C<sub PI () { 3.14159 }>). Each unique hash key is only allocated once, no matter how many hashes have an entry with that key. So even if you have 100 copies of the same hash, the hash keys never have to be reallocated. =head1 Support for More Operating Systems Support for the following operating systems is new in Perl 5.004. =head2 Win32 Perl 5.004 now includes support for building a "native" perl under Windows NT, using the Microsoft Visual C++ compiler (versions 2.0 and above) or the Borland C++ compiler (versions 5.02 and above). The resulting perl can be used under Windows 95 (if it is installed in the same directory locations as it got installed in Windows NT). This port includes support for perl extension building tools like L<ExtUtils::MakeMaker> and L<h2xs>, so that many extensions available on the Comprehensive Perl Archive Network (CPAN) can now be readily built under Windows NT. See http://www.perl.com/ for more information on CPAN and F<README.win32> in the perl distribution for more details on how to get started with building this port. There is also support for building perl under the Cygwin32 environment. Cygwin32 is a set of GNU tools that make it possible to compile and run many Unix programs under Windows NT by providing a mostly Unix-like interface for compilation and execution. See F<README.cygwin32> in the perl distribution for more details on this port and how to obtain the Cygwin32 toolkit. =head2 Plan 9 See F<README.plan9> in the perl distribution. =head2 QNX See F<README.qnx> in the perl distribution. =head2 AmigaOS See F<README.amigaos> in the perl distribution. =head1 Pragmata Six new pragmatic modules exist: =over 4 =item use autouse MODULE => qw(sub1 sub2 sub3) Defers C<require MODULE> until someone calls one of the specified subroutines (which must be exported by MODULE). This pragma should be used with caution, and only when necessary. =item use blib =item use blib 'dir' Looks for MakeMaker-like I<'blib'> directory structure starting in I<dir> (or current directory) and working back up to five levels of parent directories. Intended for use on command line with B<-M> option as a way of testing arbitrary scripts against an uninstalled version of a package. =item use constant NAME => VALUE Provides a convenient interface for creating compile-time constants, See L<perlsub/"Constant Functions">. =item use locale Tells the compiler to enable (or disable) the use of POSIX locales for builtin operations. When C<use locale> is in effect, the current LC_CTYPE locale is used for regular expressions and case mapping; LC_COLLATE for string ordering; and LC_NUMERIC for numeric formatting in printf and sprintf (but B<not> in print). LC_NUMERIC is always used in write, since lexical scoping of formats is problematic at best. Each C<use locale> or C<no locale> affects statements to the end of the enclosing BLOCK or, if not inside a BLOCK, to the end of the current file. Locales can be switched and queried with POSIX::setlocale(). See L<perllocale> for more information. =item use ops Disable unsafe opcodes, or any named opcodes, when compiling Perl code. =item use vmsish Enable VMS-specific language features. Currently, there are three VMS-specific features available: 'status', which makes C<$?> and C<system> return genuine VMS status values instead of emulating POSIX; 'exit', which makes C<exit> take a genuine VMS status value instead of assuming that C<exit 1> is an error; and 'time', which makes all times relative to the local time zone, in the VMS tradition. =back =head1 Modules =head2 Required Updates Though Perl 5.004 is compatible with almost all modules that work with Perl 5.003, there are a few exceptions: Module Required Version for Perl 5.004 ------ ------------------------------- Filter Filter-1.12 LWP libwww-perl-5.08 Tk Tk400.202 (-w makes noise) Also, the majordomo mailing list program, version 1.94.1, doesn't work with Perl 5.004 (nor with perl 4), because it executes an invalid regular expression. This bug is fixed in majordomo version 1.94.2. =head2 Installation directories The I<installperl> script now places the Perl source files for extensions in the architecture-specific library directory, which is where the shared libraries for extensions have always been. This change is intended to allow administrators to keep the Perl 5.004 library directory unchanged from a previous version, without running the risk of binary incompatibility between extensions' Perl source and shared libraries. =head2 Module information summary Brand new modules, arranged by topic rather than strictly alphabetically: CGI.pm Web server interface ("Common Gateway Interface") CGI/Apache.pm Support for Apache's Perl module CGI/Carp.pm Log server errors with helpful context CGI/Fast.pm Support for FastCGI (persistent server process) CGI/Push.pm Support for server push CGI/Switch.pm Simple interface for multiple server types CPAN Interface to Comprehensive Perl Archive Network CPAN::FirstTime Utility for creating CPAN configuration file CPAN::Nox Runs CPAN while avoiding compiled extensions IO.pm Top-level interface to IO::* classes IO/File.pm IO::File extension Perl module IO/Handle.pm IO::Handle extension Perl module IO/Pipe.pm IO::Pipe extension Perl module IO/Seekable.pm IO::Seekable extension Perl module IO/Select.pm IO::Select extension Perl module IO/Socket.pm IO::Socket extension Perl module Opcode.pm Disable named opcodes when compiling Perl code ExtUtils/Embed.pm Utilities for embedding Perl in C programs ExtUtils/testlib.pm Fixes up @INC to use just-built extension FindBin.pm Find path of currently executing program Class/Struct.pm Declare struct-like datatypes as Perl classes File/stat.pm By-name interface to Perl's builtin stat Net/hostent.pm By-name interface to Perl's builtin gethost* Net/netent.pm By-name interface to Perl's builtin getnet* Net/protoent.pm By-name interface to Perl's builtin getproto* Net/servent.pm By-name interface to Perl's builtin getserv* Time/gmtime.pm By-name interface to Perl's builtin gmtime Time/localtime.pm By-name interface to Perl's builtin localtime Time/tm.pm Internal object for Time::{gm,local}time User/grent.pm By-name interface to Perl's builtin getgr* User/pwent.pm By-name interface to Perl's builtin getpw* Tie/RefHash.pm Base class for tied hashes with references as keys UNIVERSAL.pm Base class for *ALL* classes =head2 Fcntl New constants in the existing Fcntl modules are now supported, provided that your operating system happens to support them: F_GETOWN F_SETOWN O_ASYNC O_DEFER O_DSYNC O_FSYNC O_SYNC O_EXLOCK O_SHLOCK These constants are intended for use with the Perl operators sysopen() and fcntl() and the basic database modules like SDBM_File. For the exact meaning of these and other Fcntl constants please refer to your operating system's documentation for fcntl() and open(). In addition, the Fcntl module now provides these constants for use with the Perl operator flock(): LOCK_SH LOCK_EX LOCK_NB LOCK_UN These constants are defined in all environments (because where there is no flock() system call, Perl emulates it). However, for historical reasons, these constants are not exported unless they are explicitly requested with the ":flock" tag (e.g. C<use Fcntl ':flock'>). =head2 IO The IO module provides a simple mechanism to load all the IO modules at one go. Currently this includes: IO::Handle IO::Seekable IO::File IO::Pipe IO::Socket For more information on any of these modules, please see its respective documentation. =head2 Math::Complex The Math::Complex module has been totally rewritten, and now supports more operations. These are overloaded: + - * / ** <=> neg ~ abs sqrt exp log sin cos atan2 "" (stringify) And these functions are now exported: pi i Re Im arg log10 logn ln cbrt root tan csc sec cot asin acos atan acsc asec acot sinh cosh tanh csch sech coth asinh acosh atanh acsch asech acoth cplx cplxe =head2 Math::Trig This new module provides a simpler interface to parts of Math::Complex for those who need trigonometric functions only for real numbers. =head2 DB_File There have been quite a few changes made to DB_File. Here are a few of the highlights: =over 4 =item * Fixed a handful of bugs. =item * By public demand, added support for the standard hash function exists(). =item * Made it compatible with Berkeley DB 1.86. =item * Made negative subscripts work with RECNO interface. =item * Changed the default flags from O_RDWR to O_CREAT|O_RDWR and the default mode from 0640 to 0666. =item * Made DB_File automatically import the open() constants (O_RDWR, O_CREAT etc.) from Fcntl, if available. =item * Updated documentation. =back Refer to the HISTORY section in DB_File.pm for a complete list of changes. Everything after DB_File 1.01 has been added since 5.003. =head2 Net::Ping Major rewrite - support added for both udp echo and real icmp pings. =head2 Object-oriented overrides for builtin operators Many of the Perl builtins returning lists now have object-oriented overrides. These are: File::stat Net::hostent Net::netent Net::protoent Net::servent Time::gmtime Time::localtime User::grent User::pwent For example, you can now say use File::stat; use User::pwent; $his = (stat($filename)->st_uid == pwent($whoever)->pw_uid); =head1 Utility Changes =head2 pod2html =over 4 =item Sends converted HTML to standard output The I<pod2html> utility included with Perl 5.004 is entirely new. By default, it sends the converted HTML to its standard output, instead of writing it to a file like Perl 5.003's I<pod2html> did. Use the B<--outfile=FILENAME> option to write to a file. =back =head2 xsubpp =over 4 =item C<void> XSUBs now default to returning nothing Due to a documentation/implementation bug in previous versions of Perl, XSUBs with a return type of C<void> have actually been returning one value. Usually that value was the GV for the XSUB, but sometimes it was some already freed or reused value, which would sometimes lead to program failure. In Perl 5.004, if an XSUB is declared as returning C<void>, it actually returns no value, i.e. an empty list (though there is a backward-compatibility exception; see below). If your XSUB really does return an SV, you should give it a return type of C<SV *>. For backward compatibility, I<xsubpp> tries to guess whether a C<void> XSUB is really C<void> or if it wants to return an C<SV *>. It does so by examining the text of the XSUB: if I<xsubpp> finds what looks like an assignment to C<ST(0)>, it assumes that the XSUB's return type is really C<SV *>. =back =head1 C Language API Changes =over 4 =item C<gv_fetchmethod> and C<perl_call_sv> The C<gv_fetchmethod> function finds a method for an object, just like in Perl 5.003. The GV it returns may be a method cache entry. However, in Perl 5.004, method cache entries are not visible to users; therefore, they can no longer be passed directly to C<perl_call_sv>. Instead, you should use the C<GvCV> macro on the GV to extract its CV, and pass the CV to C<perl_call_sv>. The most likely symptom of passing the result of C<gv_fetchmethod> to C<perl_call_sv> is Perl's producing an "Undefined subroutine called" error on the I<second> call to a given method (since there is no cache on the first call). =item C<perl_eval_pv> A new function handy for eval'ing strings of Perl code inside C code. This function returns the value from the eval statement, which can be used instead of fetching globals from the symbol table. See L<perlguts>, L<perlembed> and L<perlcall> for details and examples. =item Extended API for manipulating hashes Internal handling of hash keys has changed. The old hashtable API is still fully supported, and will likely remain so. The additions to the API allow passing keys as C<SV*>s, so that C<tied> hashes can be given real scalars as keys rather than plain strings (nontied hashes still can only use strings as keys). New extensions must use the new hash access functions and macros if they wish to use C<SV*> keys. These additions also make it feasible to manipulate C<HE*>s (hash entries), which can be more efficient. See L<perlguts> for details. =back =head1 Documentation Changes Many of the base and library pods were updated. These new pods are included in section 1: =over 4 =item L<perldelta> This document. =item L<perlfaq> Frequently asked questions. =item L<perllocale> Locale support (internationalization and localization). =item L<perltoot> Tutorial on Perl OO programming. =item L<perlapio> Perl internal IO abstraction interface. =item L<perlmodlib> Perl module library and recommended practice for module creation. Extracted from L<perlmod> (which is much smaller as a result). =item L<perldebug> Although not new, this has been massively updated. =item L<perlsec> Although not new, this has been massively updated. =back =head1 New Diagnostics Several new conditions will trigger warnings that were silent before. Some only affect certain platforms. The following new warnings and errors outline these. These messages are classified as follows (listed in increasing order of desperation): (W) A warning (optional). (D) A deprecation (optional). (S) A severe warning (mandatory). (F) A fatal error (trappable). (P) An internal error you should never see (trappable). (X) A very fatal error (nontrappable). (A) An alien error message (not generated by Perl). =over 4 =item "my" variable %s masks earlier declaration in same scope (W) A lexical variable has been redeclared in the same scope, effectively eliminating all access to the previous instance. This is almost always a typographical error. Note that the earlier variable will still exist until the end of the scope or until all closure referents to it are destroyed. =item %s argument is not a HASH element or slice (F) The argument to delete() must be either a hash element, such as $foo{$bar} $ref->[12]->{"susie"} or a hash slice, such as @foo{$bar, $baz, $xyzzy} @{$ref->[12]}{"susie", "queue"} =item Allocation too large: %lx (X) You can't allocate more than 64K on an MS-DOS machine. =item Allocation too large (F) You can't allocate more than 2^31+"small amount" bytes. =item Applying %s to %s will act on scalar(%s) (W) The pattern match (//), substitution (s///), and transliteration (tr///) operators work on scalar values. If you apply one of them to an array or a hash, it will convert the array or hash to a scalar value (the length of an array or the population info of a hash) and then work on that scalar value. This is probably not what you meant to do. See L<perlfunc/grep> and L<perlfunc/map> for alternatives. =item Attempt to free nonexistent shared string (P) Perl maintains a reference counted internal table of strings to optimize the storage and access of hash keys and other strings. This indicates someone tried to decrement the reference count of a string that can no longer be found in the table. =item Attempt to use reference as lvalue in substr (W) You supplied a reference as the first argument to substr() used as an lvalue, which is pretty strange. Perhaps you forgot to dereference it first. See L<perlfunc/substr>. =item Bareword "%s" refers to nonexistent package (W) You used a qualified bareword of the form C<Foo::>, but the compiler saw no other uses of that namespace before that point. Perhaps you need to predeclare a package? =item Can't redefine active sort subroutine %s (F) Perl optimizes the internal handling of sort subroutines and keeps pointers into them. You tried to redefine one such sort subroutine when it was currently active, which is not allowed. If you really want to do this, you should write C<sort { &func } @x> instead of C<sort func @x>. =item Can't use bareword ("%s") as %s ref while "strict refs" in use (F) Only hard references are allowed by "strict refs". Symbolic references are disallowed. See L<perlref>. =item Cannot resolve method `%s' overloading `%s' in package `%s' (P) Internal error trying to resolve overloading specified by a method name (as opposed to a subroutine reference). =item Constant subroutine %s redefined (S) You redefined a subroutine which had previously been eligible for inlining. See L<perlsub/"Constant Functions"> for commentary and workarounds. =item Constant subroutine %s undefined (S) You undefined a subroutine which had previously been eligible for inlining. See L<perlsub/"Constant Functions"> for commentary and workarounds. =item Copy method did not return a reference (F) The method which overloads "=" is buggy. See L<overload/Copy Constructor>. =item Died (F) You passed die() an empty string (the equivalent of C<die "">) or you called it with no args and both C<$@> and C<$_> were empty. =item Exiting pseudo-block via %s (W) You are exiting a rather special block construct (like a sort block or subroutine) by unconventional means, such as a goto, or a loop control statement. See L<perlfunc/sort>. =item Identifier too long (F) Perl limits identifiers (names for variables, functions, etc.) to 252 characters for simple names, somewhat more for compound names (like C<$A::B>). You've exceeded Perl's limits. Future versions of Perl are likely to eliminate these arbitrary limitations. =item Illegal character %s (carriage return) (F) A carriage return character was found in the input. This is an error, and not a warning, because carriage return characters can break multi-line strings, including here documents (e.g., C<print <<EOF;>). =item Illegal switch in PERL5OPT: %s (X) The PERL5OPT environment variable may only be used to set the following switches: B<-[DIMUdmw]>. =item Integer overflow in hex number (S) The literal hex number you have specified is too big for your architecture. On a 32-bit architecture the largest hex literal is 0xFFFFFFFF. =item Integer overflow in octal number (S) The literal octal number you have specified is too big for your architecture. On a 32-bit architecture the largest octal literal is 037777777777. =item internal error: glob failed (P) Something went wrong with the external program(s) used for C<glob> and C<< <*.c> >>. This may mean that your csh (C shell) is broken. If so, you should change all of the csh-related variables in config.sh: If you have tcsh, make the variables refer to it as if it were csh (e.g. C<full_csh='/usr/bin/tcsh'>); otherwise, make them all empty (except that C<d_csh> should be C<'undef'>) so that Perl will think csh is missing. In either case, after editing config.sh, run C<./Configure -S> and rebuild Perl. =item Invalid conversion in %s: "%s" (W) Perl does not understand the given format conversion. See L<perlfunc/sprintf>. =item Invalid type in pack: '%s' (F) The given character is not a valid pack type. See L<perlfunc/pack>. =item Invalid type in unpack: '%s' (F) The given character is not a valid unpack type. See L<perlfunc/unpack>. =item Name "%s::%s" used only once: possible typo (W) Typographical errors often show up as unique variable names. If you had a good reason for having a unique name, then just mention it again somehow to suppress the message (the C<use vars> pragma is provided for just this purpose). =item Null picture in formline (F) The first argument to formline must be a valid format picture specification. It was found to be empty, which probably means you supplied it an uninitialized value. See L<perlform>. =item Offset outside string (F) You tried to do a read/write/send/recv operation with an offset pointing outside the buffer. This is difficult to imagine. The sole exception to this is that C<sysread()>ing past the buffer will extend the buffer and zero pad the new area. =item Out of memory! (X|F) The malloc() function returned 0, indicating there was insufficient remaining memory (or virtual memory) to satisfy the request. The request was judged to be small, so the possibility to trap it depends on the way Perl was compiled. By default it is not trappable. However, if compiled for this, Perl may use the contents of C<$^M> as an emergency pool after die()ing with this message. In this case the error is trappable I<once>. =item Out of memory during request for %s (F) The malloc() function returned 0, indicating there was insufficient remaining memory (or virtual memory) to satisfy the request. However, the request was judged large enough (compile-time default is 64K), so a possibility to shut down by trapping this error is granted. =item panic: frexp (P) The library function frexp() failed, making printf("%f") impossible. =item Possible attempt to put comments in qw() list (W) qw() lists contain items separated by whitespace; as with literal strings, comment characters are not ignored, but are instead treated as literal data. (You may have used different delimiters than the parentheses shown here; braces are also frequently used.) You probably wrote something like this: @list = qw( a # a comment b # another comment ); when you should have written this: @list = qw( a b ); If you really want comments, build your list the old-fashioned way, with quotes and commas: @list = ( 'a', # a comment 'b', # another comment ); =item Possible attempt to separate words with commas (W) qw() lists contain items separated by whitespace; therefore commas aren't needed to separate the items. (You may have used different delimiters than the parentheses shown here; braces are also frequently used.) You probably wrote something like this: qw! a, b, c !; which puts literal commas into some of the list items. Write it without commas if you don't want them to appear in your data: qw! a b c !; =item Scalar value @%s{%s} better written as $%s{%s} (W) You've used a hash slice (indicated by @) to select a single element of a hash. Generally it's better to ask for a scalar value (indicated by $). The difference is that C<$foo{&bar}> always behaves like a scalar, both when assigning to it and when evaluating its argument, while C<@foo{&bar}> behaves like a list when you assign to it, and provides a list context to its subscript, which can do weird things if you're expecting only one subscript. =item Stub found while resolving method `%s' overloading `%s' in %s (P) Overloading resolution over @ISA tree may be broken by importing stubs. Stubs should never be implicitly created, but explicit calls to C<can> may break this. =item Too late for "B<-T>" option (X) The #! line (or local equivalent) in a Perl script contains the B<-T> option, but Perl was not invoked with B<-T> in its argument list. This is an error because, by the time Perl discovers a B<-T> in a script, it's too late to properly taint everything from the environment. So Perl gives up. =item untie attempted while %d inner references still exist (W) A copy of the object returned from C<tie> (or C<tied>) was still valid when C<untie> was called. =item Unrecognized character %s (F) The Perl parser has no idea what to do with the specified character in your Perl script (or eval). Perhaps you tried to run a compressed script, a binary program, or a directory as a Perl program. =item Unsupported function fork (F) Your version of executable does not support forking. Note that under some systems, like OS/2, there may be different flavors of Perl executables, some of which may support fork, some not. Try changing the name you call Perl by to C<perl_>, C<perl__>, and so on. =item Use of "$$<digit>" to mean "${$}<digit>" is deprecated (D) Perl versions before 5.004 misinterpreted any type marker followed by "$" and a digit. For example, "$$0" was incorrectly taken to mean "${$}0" instead of "${$0}". This bug is (mostly) fixed in Perl 5.004. However, the developers of Perl 5.004 could not fix this bug completely, because at least two widely-used modules depend on the old meaning of "$$0" in a string. So Perl 5.004 still interprets "$$<digit>" in the old (broken) way inside strings; but it generates this message as a warning. And in Perl 5.005, this special treatment will cease. =item Value of %s can be "0"; test with defined() (W) In a conditional expression, you used <HANDLE>, <*> (glob), C<each()>, or C<readdir()> as a boolean value. Each of these constructs can return a value of "0"; that would make the conditional expression false, which is probably not what you intended. When using these constructs in conditional expressions, test their values with the C<defined> operator. =item Variable "%s" may be unavailable (W) An inner (nested) I<anonymous> subroutine is inside a I<named> subroutine, and outside that is another subroutine; and the anonymous (innermost) subroutine is referencing a lexical variable defined in the outermost subroutine. For example: sub outermost { my $a; sub middle { sub { $a } } } If the anonymous subroutine is called or referenced (directly or indirectly) from the outermost subroutine, it will share the variable as you would expect. But if the anonymous subroutine is called or referenced when the outermost subroutine is not active, it will see the value of the shared variable as it was before and during the *first* call to the outermost subroutine, which is probably not what you want. In these circumstances, it is usually best to make the middle subroutine anonymous, using the C<sub {}> syntax. Perl has specific support for shared variables in nested anonymous subroutines; a named subroutine in between interferes with this feature. =item Variable "%s" will not stay shared (W) An inner (nested) I<named> subroutine is referencing a lexical variable defined in an outer subroutine. When the inner subroutine is called, it will probably see the value of the outer subroutine's variable as it was before and during the *first* call to the outer subroutine; in this case, after the first call to the outer subroutine is complete, the inner and outer subroutines will no longer share a common value for the variable. In other words, the variable will no longer be shared. Furthermore, if the outer subroutine is anonymous and references a lexical variable outside itself, then the outer and inner subroutines will I<never> share the given variable. This problem can usually be solved by making the inner subroutine anonymous, using the C<sub {}> syntax. When inner anonymous subs that reference variables in outer subroutines are called or referenced, they are automatically rebound to the current values of such variables. =item Warning: something's wrong (W) You passed warn() an empty string (the equivalent of C<warn "">) or you called it with no args and C<$_> was empty. =item Ill-formed logical name |%s| in prime_env_iter (W) A warning peculiar to VMS. A logical name was encountered when preparing to iterate over %ENV which violates the syntactic rules governing logical names. Since it cannot be translated normally, it is skipped, and will not appear in %ENV. This may be a benign occurrence, as some software packages might directly modify logical name tables and introduce nonstandard names, or it may indicate that a logical name table has been corrupted. =item Got an error from DosAllocMem (P) An error peculiar to OS/2. Most probably you're using an obsolete version of Perl, and this should not happen anyway. =item Malformed PERLLIB_PREFIX (F) An error peculiar to OS/2. PERLLIB_PREFIX should be of the form prefix1;prefix2 or prefix1 prefix2 with nonempty prefix1 and prefix2. If C<prefix1> is indeed a prefix of a builtin library search path, prefix2 is substituted. The error may appear if components are not found, or are too long. See "PERLLIB_PREFIX" in F<README.os2>. =item PERL_SH_DIR too long (F) An error peculiar to OS/2. PERL_SH_DIR is the directory to find the C<sh>-shell in. See "PERL_SH_DIR" in F<README.os2>. =item Process terminated by SIG%s (W) This is a standard message issued by OS/2 applications, while *nix applications die in silence. It is considered a feature of the OS/2 port. One can easily disable this by appropriate sighandlers, see L<perlipc/"Signals">. See also "Process terminated by SIGTERM/SIGINT" in F<README.os2>. =back =head1 BUGS If you find what you think is a bug, you might check the headers of recently posted articles in the comp.lang.perl.misc newsgroup. There may also be information at http://www.perl.com/perl/ , the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Make sure you trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to <F<perlbug@perl.com>> to be analysed by the Perl porting team. =head1 SEE ALSO The F<Changes> file for exhaustive details on what changed. The F<INSTALL> file for how to build Perl. This file has been significantly updated for 5.004, so even veteran users should look through it. The F<README> file for general stuff. The F<Copying> file for copyright information. =head1 HISTORY Constructed by Tom Christiansen, grabbing material with permission from innumerable contributors, with kibitzing by more than a few Perl porters. Last update: Wed May 14 11:14:09 EDT 1997 perlos2.pod 0000644 00000266244 15125556335 0006666 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see perlpod manpage) which is specially designed to be readable as is. =head1 NAME perlos2 - Perl under OS/2, DOS, Win0.3*, Win0.95 and WinNT. =head1 SYNOPSIS One can read this document in the following formats: man perlos2 view perl perlos2 explorer perlos2.html info perlos2 to list some (not all may be available simultaneously), or it may be read I<as is>: either as F<README.os2>, or F<pod/perlos2.pod>. To read the F<.INF> version of documentation (B<very> recommended) outside of OS/2, one needs an IBM's reader (may be available on IBM ftp sites (?) (URL anyone?)) or shipped with PC DOS 7.0 and IBM's Visual Age C++ 3.5. A copy of a Win* viewer is contained in the "Just add OS/2 Warp" package ftp://ftp.software.ibm.com/ps/products/os2/tools/jaow/jaow.zip in F<?:\JUST_ADD\view.exe>. This gives one an access to EMX's F<.INF> docs as well (text form is available in F</emx/doc> in EMX's distribution). There is also a different viewer named xview. Note that if you have F<lynx.exe> or F<netscape.exe> installed, you can follow WWW links from this document in F<.INF> format. If you have EMX docs installed correctly, you can follow library links (you need to have C<view emxbook> working by setting C<EMXBOOK> environment variable as it is described in EMX docs). =cut Contents (This may be a little bit obsolete) perlos2 - Perl under OS/2, DOS, Win0.3*, Win0.95 and WinNT. NAME SYNOPSIS DESCRIPTION - Target - Other OSes - Prerequisites - Starting Perl programs under OS/2 (and DOS and...) - Starting OS/2 (and DOS) programs under Perl Frequently asked questions - "It does not work" - I cannot run external programs - I cannot embed perl into my program, or use perl.dll from my - `` and pipe-open do not work under DOS. - Cannot start find.exe "pattern" file INSTALLATION - Automatic binary installation - Manual binary installation - Warning Accessing documentation - OS/2 .INF file - Plain text - Manpages - HTML - GNU info files - PDF files - LaTeX docs BUILD - The short story - Prerequisites - Getting perl source - Application of the patches - Hand-editing - Making - Testing - Installing the built perl - a.out-style build Build FAQ - Some / became \ in pdksh. - 'errno' - unresolved external - Problems with tr or sed - Some problem (forget which ;-) - Library ... not found - Segfault in make - op/sprintf test failure Specific (mis)features of OS/2 port - setpriority, getpriority - system() - extproc on the first line - Additional modules: - Prebuilt methods: - Prebuilt variables: - Misfeatures - Modifications - Identifying DLLs - Centralized management of resources Perl flavors - perl.exe - perl_.exe - perl__.exe - perl___.exe - Why strange names? - Why dynamic linking? - Why chimera build? ENVIRONMENT - PERLLIB_PREFIX - PERL_BADLANG - PERL_BADFREE - PERL_SH_DIR - USE_PERL_FLOCK - TMP or TEMP Evolution - Text-mode filehandles - Priorities - DLL name mangling: pre 5.6.2 - DLL name mangling: 5.6.2 and beyond - DLL forwarder generation - Threading - Calls to external programs - Memory allocation - Threads BUGS AUTHOR SEE ALSO =head1 DESCRIPTION =head2 Target The target is to make OS/2 one of the best supported platform for using/building/developing Perl and I<Perl applications>, as well as make Perl the best language to use under OS/2. The secondary target is to try to make this work under DOS and Win* as well (but not B<too> hard). The current state is quite close to this target. Known limitations: =over 5 =item * Some *nix programs use fork() a lot; with the mostly useful flavors of perl for OS/2 (there are several built simultaneously) this is supported; but some flavors do not support this (e.g., when Perl is called from inside REXX). Using fork() after I<use>ing dynamically loading extensions would not work with I<very> old versions of EMX. =item * You need a separate perl executable F<perl__.exe> (see L</perl__.exe>) if you want to use PM code in your application (as Perl/Tk or OpenGL Perl modules do) without having a text-mode window present. While using the standard F<perl.exe> from a text-mode window is possible too, I have seen cases when this causes degradation of the system stability. Using F<perl__.exe> avoids such a degradation. =item * There is no simple way to access WPS objects. The only way I know is via C<OS2::REXX> and C<SOM> extensions (see L<OS2::REXX>, L<SOM>). However, we do not have access to convenience methods of Object-REXX. (Is it possible at all? I know of no Object-REXX API.) The C<SOM> extension (currently in alpha-text) may eventually remove this shortcoming; however, due to the fact that DII is not supported by the C<SOM> module, using C<SOM> is not as convenient as one would like it. =back Please keep this list up-to-date by informing me about other items. =head2 Other OSes Since OS/2 port of perl uses a remarkable EMX environment, it can run (and build extensions, and - possibly - be built itself) under any environment which can run EMX. The current list is DOS, DOS-inside-OS/2, Win0.3*, Win0.95 and WinNT. Out of many perl flavors, only one works, see L</"F<perl_.exe>">. Note that not all features of Perl are available under these environments. This depends on the features the I<extender> - most probably RSX - decided to implement. Cf. L</Prerequisites>. =head2 Prerequisites =over 6 =item EMX EMX runtime is required (may be substituted by RSX). Note that it is possible to make F<perl_.exe> to run under DOS without any external support by binding F<emx.exe>/F<rsx.exe> to it, see C<emxbind>. Note that under DOS for best results one should use RSX runtime, which has much more functions working (like C<fork>, C<popen> and so on). In fact RSX is required if there is no VCPI present. Note the RSX requires DPMI. Many implementations of DPMI are known to be very buggy, beware! Only the latest runtime is supported, currently C<0.9d fix 03>. Perl may run under earlier versions of EMX, but this is not tested. One can get different parts of EMX from, say ftp://crydee.sai.msu.ru/pub/comp/os/os2/leo/gnu/emx+gcc/ http://hobbes.nmsu.edu/h-browse.php?dir=/pub/os2/dev/emx/v0.9d/ The runtime component should have the name F<emxrt.zip>. B<NOTE>. When using F<emx.exe>/F<rsx.exe>, it is enough to have them on your path. One does not need to specify them explicitly (though this emx perl_.exe -de 0 will work as well.) =item RSX To run Perl on DPMI platforms one needs RSX runtime. This is needed under DOS-inside-OS/2, Win0.3*, Win0.95 and WinNT (see L</"Other OSes">). RSX would not work with VCPI only, as EMX would, it requires DMPI. Having RSX and the latest F<sh.exe> one gets a fully functional B<*nix>-ish environment under DOS, say, C<fork>, C<``> and pipe-C<open> work. In fact, MakeMaker works (for static build), so one can have Perl development environment under DOS. One can get RSX from, say http://cd.textfiles.com/hobbesos29804/disk1/EMX09C/ ftp://crydee.sai.msu.ru/pub/comp/os/os2/leo/gnu/emx+gcc/contrib/ Contact the author on C<rainer@mathematik.uni-bielefeld.de>. The latest F<sh.exe> with DOS hooks is available in http://www.ilyaz.org/software/os2/ as F<sh_dos.zip> or under similar names starting with C<sh>, C<pdksh> etc. =item HPFS Perl does not care about file systems, but the perl library contains many files with long names, so to install it intact one needs a file system which supports long file names. Note that if you do not plan to build the perl itself, it may be possible to fool EMX to truncate file names. This is not supported, read EMX docs to see how to do it. =item pdksh To start external programs with complicated command lines (like with pipes in between, and/or quoting of arguments), Perl uses an external shell. With EMX port such shell should be named F<sh.exe>, and located either in the wired-in-during-compile locations (usually F<F:/bin>), or in configurable location (see L</"C<PERL_SH_DIR>">). For best results use EMX pdksh. The standard binary (5.2.14 or later) runs under DOS (with L</RSX>) as well, see http://www.ilyaz.org/software/os2/ =back =head2 Starting Perl programs under OS/2 (and DOS and...) Start your Perl program F<foo.pl> with arguments C<arg1 arg2 arg3> the same way as on any other platform, by perl foo.pl arg1 arg2 arg3 If you want to specify perl options C<-my_opts> to the perl itself (as opposed to your program), use perl -my_opts foo.pl arg1 arg2 arg3 Alternately, if you use OS/2-ish shell, like CMD or 4os2, put the following at the start of your perl script: extproc perl -S -my_opts rename your program to F<foo.cmd>, and start it by typing foo arg1 arg2 arg3 Note that because of stupid OS/2 limitations the full path of the perl script is not available when you use C<extproc>, thus you are forced to use C<-S> perl switch, and your script should be on the C<PATH>. As a plus side, if you know a full path to your script, you may still start it with perl ../../blah/foo.cmd arg1 arg2 arg3 (note that the argument C<-my_opts> is taken care of by the C<extproc> line in your script, see L</C<extproc> on the first line>). To understand what the above I<magic> does, read perl docs about C<-S> switch - see L<perlrun>, and cmdref about C<extproc>: view perl perlrun man perlrun view cmdref extproc help extproc or whatever method you prefer. There are also endless possibilities to use I<executable extensions> of 4os2, I<associations> of WPS and so on... However, if you use *nixish shell (like F<sh.exe> supplied in the binary distribution), you need to follow the syntax specified in L<perlrun/"Command Switches">. Note that B<-S> switch supports scripts with additional extensions F<.cmd>, F<.btm>, F<.bat>, F<.pl> as well. =head2 Starting OS/2 (and DOS) programs under Perl This is what system() (see L<perlfunc/system>), C<``> (see L<perlop/"I/O Operators">), and I<open pipe> (see L<perlfunc/open>) are for. (Avoid exec() (see L<perlfunc/exec>) unless you know what you do). Note however that to use some of these operators you need to have a sh-syntax shell installed (see L</"Pdksh">, L</"Frequently asked questions">), and perl should be able to find it (see L</"C<PERL_SH_DIR>">). The cases when the shell is used are: =over =item 1 One-argument system() (see L<perlfunc/system>), exec() (see L<perlfunc/exec>) with redirection or shell meta-characters; =item 2 Pipe-open (see L<perlfunc/open>) with the command which contains redirection or shell meta-characters; =item 3 Backticks C<``> (see L<perlop/"I/O Operators">) with the command which contains redirection or shell meta-characters; =item 4 If the executable called by system()/exec()/pipe-open()/C<``> is a script with the "magic" C<#!> line or C<extproc> line which specifies shell; =item 5 If the executable called by system()/exec()/pipe-open()/C<``> is a script without "magic" line, and C<$ENV{EXECSHELL}> is set to shell; =item 6 If the executable called by system()/exec()/pipe-open()/C<``> is not found (is not this remark obsolete?); =item 7 For globbing (see L<perlfunc/glob>, L<perlop/"I/O Operators">) (obsolete? Perl uses builtin globbing nowadays...). =back For the sake of speed for a common case, in the above algorithms backslashes in the command name are not considered as shell metacharacters. Perl starts scripts which begin with cookies C<extproc> or C<#!> directly, without an intervention of shell. Perl uses the same algorithm to find the executable as F<pdksh>: if the path on C<#!> line does not work, and contains C</>, then the directory part of the executable is ignored, and the executable is searched in F<.> and on C<PATH>. To find arguments for these scripts Perl uses a different algorithm than F<pdksh>: up to 3 arguments are recognized, and trailing whitespace is stripped. If a script does not contain such a cooky, then to avoid calling F<sh.exe>, Perl uses the same algorithm as F<pdksh>: if C<$ENV{EXECSHELL}> is set, the script is given as the first argument to this command, if not set, then C<$ENV{COMSPEC} /c> is used (or a hardwired guess if C<$ENV{COMSPEC}> is not set). When starting scripts directly, Perl uses exactly the same algorithm as for the search of script given by B<-S> command-line option: it will look in the current directory, then on components of C<$ENV{PATH}> using the following order of appended extensions: no extension, F<.cmd>, F<.btm>, F<.bat>, F<.pl>. Note that Perl will start to look for scripts only if OS/2 cannot start the specified application, thus C<system 'blah'> will not look for a script if there is an executable file F<blah.exe> I<anywhere> on C<PATH>. In other words, C<PATH> is essentially searched twice: once by the OS for an executable, then by Perl for scripts. Note also that executable files on OS/2 can have an arbitrary extension, but F<.exe> will be automatically appended if no dot is present in the name. The workaround is as simple as that: since F<blah.> and F<blah> denote the same file (at list on FAT and HPFS file systems), to start an executable residing in file F<n:/bin/blah> (no extension) give an argument C<n:/bin/blah.> (dot appended) to system(). Perl will start PM programs from VIO (=text-mode) Perl process in a separate PM session; the opposite is not true: when you start a non-PM program from a PM Perl process, Perl would not run it in a separate session. If a separate session is desired, either ensure that shell will be used, as in C<system 'cmd /c myprog'>, or start it using optional arguments to system() documented in C<OS2::Process> module. This is considered to be a feature. =head1 Frequently asked questions =head2 "It does not work" Perl binary distributions come with a F<testperl.cmd> script which tries to detect common problems with misconfigured installations. There is a pretty large chance it will discover which step of the installation you managed to goof. C<;-)> =head2 I cannot run external programs =over 4 =item * Did you run your programs with C<-w> switch? See L</Starting OSE<sol>2 (and DOS) programs under Perl>. =item * Do you try to run I<internal> shell commands, like C<`copy a b`> (internal for F<cmd.exe>), or C<`glob a*b`> (internal for ksh)? You need to specify your shell explicitly, like C<`cmd /c copy a b`>, since Perl cannot deduce which commands are internal to your shell. =back =head2 I cannot embed perl into my program, or use F<perl.dll> from my program. =over 4 =item Is your program EMX-compiled with C<-Zmt -Zcrtdll>? Well, nowadays Perl DLL should be usable from a differently compiled program too... If you can run Perl code from REXX scripts (see L<OS2::REXX>), then there are some other aspect of interaction which are overlooked by the current hackish code to support differently-compiled principal programs. If everything else fails, you need to build a stand-alone DLL for perl. Contact me, I did it once. Sockets would not work, as a lot of other stuff. =item Did you use L<ExtUtils::Embed>? Some time ago I had reports it does not work. Nowadays it is checked in the Perl test suite, so grep F<./t> subdirectory of the build tree (as well as F<*.t> files in the F<./lib> subdirectory) to find how it should be done "correctly". =back =head2 C<``> and pipe-C<open> do not work under DOS. This may a variant of just L</"I cannot run external programs">, or a deeper problem. Basically: you I<need> RSX (see L</Prerequisites>) for these commands to work, and you may need a port of F<sh.exe> which understands command arguments. One of such ports is listed in L</Prerequisites> under RSX. Do not forget to set variable L</"C<PERL_SH_DIR>"> as well. DPMI is required for RSX. =head2 Cannot start C<find.exe "pattern" file> The whole idea of the "standard C API to start applications" is that the forms C<foo> and C<"foo"> of program arguments are completely interchangeable. F<find> breaks this paradigm; find "pattern" file find pattern file are not equivalent; F<find> cannot be started directly using the above API. One needs a way to surround the doublequotes in some other quoting construction, necessarily having an extra non-Unixish shell in between. Use one of system 'cmd', '/c', 'find "pattern" file'; `cmd /c 'find "pattern" file'` This would start F<find.exe> via F<cmd.exe> via C<sh.exe> via C<perl.exe>, but this is a price to pay if you want to use non-conforming program. =head1 INSTALLATION =head2 Automatic binary installation The most convenient way of installing a binary distribution of perl is via perl installer F<install.exe>. Just follow the instructions, and 99% of the installation blues would go away. Note however, that you need to have F<unzip.exe> on your path, and EMX environment I<running>. The latter means that if you just installed EMX, and made all the needed changes to F<Config.sys>, you may need to reboot in between. Check EMX runtime by running emxrev Binary installer also creates a folder on your desktop with some useful objects. If you need to change some aspects of the work of the binary installer, feel free to edit the file F<Perl.pkg>. This may be useful e.g., if you need to run the installer many times and do not want to make many interactive changes in the GUI. B<Things not taken care of by automatic binary installation:> =over 15 =item C<PERL_BADLANG> may be needed if you change your codepage I<after> perl installation, and the new value is not supported by EMX. See L</"C<PERL_BADLANG>">. =item C<PERL_BADFREE> see L</"C<PERL_BADFREE>">. =item F<Config.pm> This file resides somewhere deep in the location you installed your perl library, find it out by perl -MConfig -le "print $INC{'Config.pm'}" While most important values in this file I<are> updated by the binary installer, some of them may need to be hand-edited. I know no such data, please keep me informed if you find one. Moreover, manual changes to the installed version may need to be accompanied by an edit of this file. =back B<NOTE>. Because of a typo the binary installer of 5.00305 would install a variable C<PERL_SHPATH> into F<Config.sys>. Please remove this variable and put L</C<PERL_SH_DIR>> instead. =head2 Manual binary installation As of version 5.00305, OS/2 perl binary distribution comes split into 11 components. Unfortunately, to enable configurable binary installation, the file paths in the zip files are not absolute, but relative to some directory. Note that the extraction with the stored paths is still necessary (default with unzip, specify C<-d> to pkunzip). However, you need to know where to extract the files. You need also to manually change entries in F<Config.sys> to reflect where did you put the files. Note that if you have some primitive unzipper (like C<pkunzip>), you may get a lot of warnings/errors during unzipping. Upgrade to C<(w)unzip>. Below is the sample of what to do to reproduce the configuration on my machine. In F<VIEW.EXE> you can press C<Ctrl-Insert> now, and cut-and-paste from the resulting file - created in the directory you started F<VIEW.EXE> from. For each component, we mention environment variables related to each installation directory. Either choose directories to match your values of the variables, or create/append-to variables to take into account the directories. =over 3 =item Perl VIO and PM executables (dynamically linked) unzip perl_exc.zip *.exe *.ico -d f:/emx.add/bin unzip perl_exc.zip *.dll -d f:/emx.add/dll (have the directories with C<*.exe> on PATH, and C<*.dll> on LIBPATH); =item Perl_ VIO executable (statically linked) unzip perl_aou.zip -d f:/emx.add/bin (have the directory on PATH); =item Executables for Perl utilities unzip perl_utl.zip -d f:/emx.add/bin (have the directory on PATH); =item Main Perl library unzip perl_mlb.zip -d f:/perllib/lib If this directory is exactly the same as the prefix which was compiled into F<perl.exe>, you do not need to change anything. However, for perl to find the library if you use a different path, you need to C<set PERLLIB_PREFIX> in F<Config.sys>, see L</"C<PERLLIB_PREFIX>">. =item Additional Perl modules unzip perl_ste.zip -d f:/perllib/lib/site_perl/5.32.1/ Same remark as above applies. Additionally, if this directory is not one of directories on @INC (and @INC is influenced by C<PERLLIB_PREFIX>), you need to put this directory and subdirectory F<./os2> in C<PERLLIB> or C<PERL5LIB> variable. Do not use C<PERL5LIB> unless you have it set already. See L<perl/"ENVIRONMENT">. B<[Check whether this extraction directory is still applicable with the new directory structure layout!]> =item Tools to compile Perl modules unzip perl_blb.zip -d f:/perllib/lib Same remark as for F<perl_ste.zip>. =item Manpages for Perl and utilities unzip perl_man.zip -d f:/perllib/man This directory should better be on C<MANPATH>. You need to have a working F<man> to access these files. =item Manpages for Perl modules unzip perl_mam.zip -d f:/perllib/man This directory should better be on C<MANPATH>. You need to have a working man to access these files. =item Source for Perl documentation unzip perl_pod.zip -d f:/perllib/lib This is used by the C<perldoc> program (see L<perldoc>), and may be used to generate HTML documentation usable by WWW browsers, and documentation in zillions of other formats: C<info>, C<LaTeX>, C<Acrobat>, C<FrameMaker> and so on. [Use programs such as F<pod2latex> etc.] =item Perl manual in F<.INF> format unzip perl_inf.zip -d d:/os2/book This directory should better be on C<BOOKSHELF>. =item Pdksh unzip perl_sh.zip -d f:/bin This is used by perl to run external commands which explicitly require shell, like the commands using I<redirection> and I<shell metacharacters>. It is also used instead of explicit F</bin/sh>. Set C<PERL_SH_DIR> (see L</"C<PERL_SH_DIR>">) if you move F<sh.exe> from the above location. B<Note.> It may be possible to use some other sh-compatible shell (untested). =back After you installed the components you needed and updated the F<Config.sys> correspondingly, you need to hand-edit F<Config.pm>. This file resides somewhere deep in the location you installed your perl library, find it out by perl -MConfig -le "print $INC{'Config.pm'}" You need to correct all the entries which look like file paths (they currently start with C<f:/>). =head2 B<Warning> The automatic and manual perl installation leave precompiled paths inside perl executables. While these paths are overwritable (see L</"C<PERLLIB_PREFIX>">, L</"C<PERL_SH_DIR>">), some people may prefer binary editing of paths inside the executables/DLLs. =head1 Accessing documentation Depending on how you built/installed perl you may have (otherwise identical) Perl documentation in the following formats: =head2 OS/2 F<.INF> file Most probably the most convenient form. Under OS/2 view it as view perl view perl perlfunc view perl less view perl ExtUtils::MakeMaker (currently the last two may hit a wrong location, but this may improve soon). Under Win* see L</"SYNOPSIS">. If you want to build the docs yourself, and have I<OS/2 toolkit>, run pod2ipf > perl.ipf in F</perllib/lib/pod> directory, then ipfc /inf perl.ipf (Expect a lot of errors during the both steps.) Now move it on your BOOKSHELF path. =head2 Plain text If you have perl documentation in the source form, perl utilities installed, and GNU groff installed, you may use perldoc perlfunc perldoc less perldoc ExtUtils::MakeMaker to access the perl documentation in the text form (note that you may get better results using perl manpages). Alternately, try running pod2text on F<.pod> files. =head2 Manpages If you have F<man> installed on your system, and you installed perl manpages, use something like this: man perlfunc man 3 less man ExtUtils.MakeMaker to access documentation for different components of Perl. Start with man perl Note that dot (F<.>) is used as a package separator for documentation for packages, and as usual, sometimes you need to give the section - C<3> above - to avoid shadowing by the I<less(1) manpage>. Make sure that the directory B<above> the directory with manpages is on our C<MANPATH>, like this set MANPATH=c:/man;f:/perllib/man for Perl manpages in C<f:/perllib/man/man1/> etc. =head2 HTML If you have some WWW browser available, installed the Perl documentation in the source form, and Perl utilities, you can build HTML docs. Cd to directory with F<.pod> files, and do like this cd f:/perllib/lib/pod pod2html After this you can direct your browser the file F<perl.html> in this directory, and go ahead with reading docs, like this: explore file:///f:/perllib/lib/pod/perl.html Alternatively you may be able to get these docs prebuilt from CPAN. =head2 GNU C<info> files Users of Emacs would appreciate it very much, especially with C<CPerl> mode loaded. You need to get latest C<pod2texi> from C<CPAN>, or, alternately, the prebuilt info pages. =head2 F<PDF> files for C<Acrobat> are available on CPAN (may be for slightly older version of perl). =head2 C<LaTeX> docs can be constructed using C<pod2latex>. =head1 BUILD Here we discuss how to build Perl under OS/2. =head2 The short story Assume that you are a seasoned porter, so are sure that all the necessary tools are already present on your system, and you know how to get the Perl source distribution. Untar it, change to the extract directory, and gnupatch -p0 < os2\diff.configure sh Configure -des -D prefix=f:/perllib make make test make install make aout_test make aout_install This puts the executables in f:/perllib/bin. Manually move them to the C<PATH>, manually move the built F<perl*.dll> to C<LIBPATH> (here for Perl DLL F<*> is a not-very-meaningful hex checksum), and run make installcmd INSTALLCMDDIR=d:/ir/on/path Assuming that the C<man>-files were put on an appropriate location, this completes the installation of minimal Perl system. (The binary distribution contains also a lot of additional modules, and the documentation in INF format.) What follows is a detailed guide through these steps. =head2 Prerequisites You need to have the latest EMX development environment, the full GNU tool suite (gawk renamed to awk, and GNU F<find.exe> earlier on path than the OS/2 F<find.exe>, same with F<sort.exe>, to check use find --version sort --version ). You need the latest version of F<pdksh> installed as F<sh.exe>. Check that you have B<BSD> libraries and headers installed, and - optionally - Berkeley DB headers and libraries, and crypt. Possible locations to get the files: ftp://ftp.uni-heidelberg.de/pub/os2/unix/ http://hobbes.nmsu.edu/h-browse.php?dir=/pub/os2 http://cd.textfiles.com/hobbesos29804/disk1/DEV32/ http://cd.textfiles.com/hobbesos29804/disk1/EMX09C/ It is reported that the following archives contain enough utils to build perl: F<gnufutil.zip>, F<gnusutil.zip>, F<gnututil.zip>, F<gnused.zip>, F<gnupatch.zip>, F<gnuawk.zip>, F<gnumake.zip>, F<gnugrep.zip>, F<bsddev.zip> and F<ksh527rt.zip> (or a later version). Note that all these utilities are known to be available from LEO: ftp://crydee.sai.msu.ru/pub/comp/os/os2/leo/gnu/ Note also that the F<db.lib> and F<db.a> from the EMX distribution are not suitable for multi-threaded compile (even single-threaded flavor of Perl uses multi-threaded C RTL, for compatibility with XFree86-OS/2). Get a corrected one from http://www.ilyaz.org/software/os2/db_mt.zip If you have I<exactly the same version of Perl> installed already, make sure that no copies or perl are currently running. Later steps of the build may fail since an older version of F<perl.dll> loaded into memory may be found. Running C<make test> becomes meaningless, since the test are checking a previous build of perl (this situation is detected and reported by F<os2/os2_base.t> test). Do not forget to unset C<PERL_EMXLOAD_SEC> in environment. Also make sure that you have F</tmp> directory on the current drive, and F<.> directory in your C<LIBPATH>. One may try to correct the latter condition by set BEGINLIBPATH .\. if you use something like F<CMD.EXE> or latest versions of F<4os2.exe>. (Setting BEGINLIBPATH to just C<.> is ignored by the OS/2 kernel.) Make sure your gcc is good for C<-Zomf> linking: run C<omflibs> script in F</emx/lib> directory. Check that you have link386 installed. It comes standard with OS/2, but may be not installed due to customization. If typing link386 shows you do not have it, do I<Selective install>, and choose C<Link object modules> in I<Optional system utilities/More>. If you get into link386 prompts, press C<Ctrl-C> to exit. =head2 Getting perl source You need to fetch the latest perl source (including developers releases). With some probability it is located in http://www.cpan.org/src/ http://www.cpan.org/src/unsupported If not, you may need to dig in the indices to find it in the directory of the current maintainer. Quick cycle of developers release may break the OS/2 build time to time, looking into http://www.cpan.org/ports/os2/ may indicate the latest release which was publicly released by the maintainer. Note that the release may include some additional patches to apply to the current source of perl. Extract it like this tar vzxf perl5.00409.tar.gz You may see a message about errors while extracting F<Configure>. This is because there is a conflict with a similarly-named file F<configure>. Change to the directory of extraction. =head2 Application of the patches You need to apply the patches in F<./os2/diff.*> like this: gnupatch -p0 < os2\diff.configure You may also need to apply the patches supplied with the binary distribution of perl. It also makes sense to look on the perl5-porters mailing list for the latest OS/2-related patches (see L<http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/>). Such patches usually contain strings C</os2/> and C<patch>, so it makes sense looking for these strings. =head2 Hand-editing You may look into the file F<./hints/os2.sh> and correct anything wrong you find there. I do not expect it is needed anywhere. =head2 Making sh Configure -des -D prefix=f:/perllib C<prefix> means: where to install the resulting perl library. Giving correct prefix you may avoid the need to specify C<PERLLIB_PREFIX>, see L</"C<PERLLIB_PREFIX>">. I<Ignore the message about missing C<ln>, and about C<-c> option to tr>. The latter is most probably already fixed, if you see it and can trace where the latter spurious warning comes from, please inform me. Now make At some moment the built may die, reporting a I<version mismatch> or I<unable to run F<perl>>. This means that you do not have F<.> in your LIBPATH, so F<perl.exe> cannot find the needed F<perl67B2.dll> (treat these hex digits as line noise). After this is fixed the build should finish without a lot of fuss. =head2 Testing Now run make test All tests should succeed (with some of them skipped). If you have the same version of Perl installed, it is crucial that you have C<.> early in your LIBPATH (or in BEGINLIBPATH), otherwise your tests will most probably test the wrong version of Perl. Some tests may generate extra messages similar to =over 4 =item A lot of C<bad free> in database tests related to Berkeley DB. I<This should be fixed already.> If it persists, you may disable this warnings, see L</"C<PERL_BADFREE>">. =item Process terminated by SIGTERM/SIGINT This is a standard message issued by OS/2 applications. *nix applications die in silence. It is considered to be a feature. One can easily disable this by appropriate sighandlers. However the test engine bleeds these message to screen in unexpected moments. Two messages of this kind I<should> be present during testing. =back To get finer test reports, call perl t/harness The report with F<io/pipe.t> failing may look like this: Failed Test Status Wstat Total Fail Failed List of failed ------------------------------------------------------------ io/pipe.t 12 1 8.33% 9 7 tests skipped, plus 56 subtests skipped. Failed 1/195 test scripts, 99.49% okay. 1/6542 subtests failed, 99.98% okay. The reasons for most important skipped tests are: =over 8 =item F<op/fs.t> =over 4 =item Z<>18 Checks C<atime> and C<mtime> of C<stat()> - unfortunately, HPFS provides only 2sec time granularity (for compatibility with FAT?). =item Z<>25 Checks C<truncate()> on a filehandle just opened for write - I do not know why this should or should not work. =back =item F<op/stat.t> Checks C<stat()>. Tests: =over 4 =item 4 Checks C<atime> and C<mtime> of C<stat()> - unfortunately, HPFS provides only 2sec time granularity (for compatibility with FAT?). =back =back =head2 Installing the built perl If you haven't yet moved C<perl*.dll> onto LIBPATH, do it now. Run make install It would put the generated files into needed locations. Manually put F<perl.exe>, F<perl__.exe> and F<perl___.exe> to a location on your PATH, F<perl.dll> to a location on your LIBPATH. Run make installcmd INSTALLCMDDIR=d:/ir/on/path to convert perl utilities to F<.cmd> files and put them on PATH. You need to put F<.EXE>-utilities on path manually. They are installed in C<$prefix/bin>, here C<$prefix> is what you gave to F<Configure>, see L</Making>. If you use C<man>, either move the installed F<*/man/> directories to your C<MANPATH>, or modify C<MANPATH> to match the location. (One could have avoided this by providing a correct C<manpath> option to F<./Configure>, or editing F<./config.sh> between configuring and making steps.) =head2 C<a.out>-style build Proceed as above, but make F<perl_.exe> (see L</"F<perl_.exe>">) by make perl_ test and install by make aout_test make aout_install Manually put F<perl_.exe> to a location on your PATH. B<Note.> The build process for C<perl_> I<does not know> about all the dependencies, so you should make sure that anything is up-to-date, say, by doing make perl_dll first. =head1 Building a binary distribution [This section provides a short overview only...] Building should proceed differently depending on whether the version of perl you install is already present and used on your system, or is a new version not yet used. The description below assumes that the version is new, so installing its DLLs and F<.pm> files will not disrupt the operation of your system even if some intermediate steps are not yet fully working. The other cases require a little bit more convoluted procedures. Below I suppose that the current version of Perl is C<5.8.2>, so the executables are named accordingly. =over =item 1. Fully build and test the Perl distribution. Make sure that no tests are failing with C<test> and C<aout_test> targets; fix the bugs in Perl and the Perl test suite detected by these tests. Make sure that C<all_test> make target runs as clean as possible. Check that F<os2/perlrexx.cmd> runs fine. =item 2. Fully install Perl, including C<installcmd> target. Copy the generated DLLs to C<LIBPATH>; copy the numbered Perl executables (as in F<perl5.8.2.exe>) to C<PATH>; copy C<perl_.exe> to C<PATH> as C<perl_5.8.2.exe>. Think whether you need backward-compatibility DLLs. In most cases you do not need to install them yet; but sometime this may simplify the following steps. =item 3. Make sure that C<CPAN.pm> can download files from CPAN. If not, you may need to manually install C<Net::FTP>. =item 4. Install the bundle C<Bundle::OS2_default> perl5.8.2 -MCPAN -e "install Bundle::OS2_default" < nul |& tee 00cpan_i_1 This may take a couple of hours on 1GHz processor (when run the first time). And this should not be necessarily a smooth procedure. Some modules may not specify required dependencies, so one may need to repeat this procedure several times until the results stabilize. perl5.8.2 -MCPAN -e "install Bundle::OS2_default" < nul |& tee 00cpan_i_2 perl5.8.2 -MCPAN -e "install Bundle::OS2_default" < nul |& tee 00cpan_i_3 Even after they stabilize, some tests may fail. Fix as many discovered bugs as possible. Document all the bugs which are not fixed, and all the failures with unknown reasons. Inspect the produced logs F<00cpan_i_1> to find suspiciously skipped tests, and other fishy events. Keep in mind that I<installation> of some modules may fail too: for example, the DLLs to update may be already loaded by F<CPAN.pm>. Inspect the C<install> logs (in the example above F<00cpan_i_1> etc) for errors, and install things manually, as in cd $CPANHOME/.cpan/build/Digest-MD5-2.31 make install Some distributions may fail some tests, but you may want to install them anyway (as above, or via C<force install> command of C<CPAN.pm> shell-mode). Since this procedure may take quite a long time to complete, it makes sense to "freeze" your CPAN configuration by disabling periodic updates of the local copy of CPAN index: set C<index_expire> to some big value (I use 365), then save the settings CPAN> o conf index_expire 365 CPAN> o conf commit Reset back to the default value C<1> when you are finished. =item 5. When satisfied with the results, rerun the C<installcmd> target. Now you can copy C<perl5.8.2.exe> to C<perl.exe>, and install the other OMF-build executables: C<perl__.exe> etc. They are ready to be used. =item 6. Change to the C<./pod> directory of the build tree, download the Perl logo F<CamelGrayBig.BMP>, and run ( perl2ipf > perl.ipf ) |& tee 00ipf ipfc /INF perl.ipf |& tee 00inf This produces the Perl docs online book C<perl.INF>. Install in on C<BOOKSHELF> path. =item 7. Now is the time to build statically linked executable F<perl_.exe> which includes newly-installed via C<Bundle::OS2_default> modules. Doing testing via C<CPAN.pm> is going to be painfully slow, since it statically links a new executable per XS extension. Here is a possible workaround: create a toplevel F<Makefile.PL> in F<$CPANHOME/.cpan/build/> with contents being (compare with L</Making executables with a custom collection of statically loaded extensions>) use ExtUtils::MakeMaker; WriteMakefile NAME => 'dummy'; execute this as perl_5.8.2.exe Makefile.PL <nul |& tee 00aout_c1 make -k all test <nul |& 00aout_t1 Again, this procedure should not be absolutely smooth. Some C<Makefile.PL>'s in subdirectories may be buggy, and would not run as "child" scripts. The interdependency of modules can strike you; however, since non-XS modules are already installed, the prerequisites of most modules have a very good chance to be present. If you discover some glitches, move directories of problematic modules to a different location; if these modules are non-XS modules, you may just ignore them - they are already installed; the remaining, XS, modules you need to install manually one by one. After each such removal you need to rerun the C<Makefile.PL>/C<make> process; usually this procedure converges soon. (But be sure to convert all the necessary external C libraries from F<.lib> format to F<.a> format: run one of emxaout foo.lib emximp -o foo.a foo.lib whichever is appropriate.) Also, make sure that the DLLs for external libraries are usable with executables compiled without C<-Zmtd> options. When you are sure that only a few subdirectories lead to failures, you may want to add C<-j4> option to C<make> to speed up skipping subdirectories with already finished build. When you are satisfied with the results of tests, install the build C libraries for extensions: make install |& tee 00aout_i Now you can rename the file F<./perl.exe> generated during the last phase to F<perl_5.8.2.exe>; place it on C<PATH>; if there is an inter-dependency between some XS modules, you may need to repeat the C<test>/C<install> loop with this new executable and some excluded modules - until the procedure converges. Now you have all the necessary F<.a> libraries for these Perl modules in the places where Perl builder can find it. Use the perl builder: change to an empty directory, create a "dummy" F<Makefile.PL> again, and run perl_5.8.2.exe Makefile.PL |& tee 00c make perl |& tee 00p This should create an executable F<./perl.exe> with all the statically loaded extensions built in. Compare the generated F<perlmain.c> files to make sure that during the iterations the number of loaded extensions only increases. Rename F<./perl.exe> to F<perl_5.8.2.exe> on C<PATH>. When it converges, you got a functional variant of F<perl_5.8.2.exe>; copy it to C<perl_.exe>. You are done with generation of the local Perl installation. =item 8. Make sure that the installed modules are actually installed in the location of the new Perl, and are not inherited from entries of @INC given for inheritance from the older versions of Perl: set C<PERLLIB_582_PREFIX> to redirect the new version of Perl to a new location, and copy the installed files to this new location. Redo the tests to make sure that the versions of modules inherited from older versions of Perl are not needed. Actually, the log output of L<pod2ipf(1)> during the step 6 gives a very detailed info about which modules are loaded from which place; so you may use it as an additional verification tool. Check that some temporary files did not make into the perl install tree. Run something like this pfind . -f "!(/\.(pm|pl|ix|al|h|a|lib|txt|pod|imp|bs|dll|ld|bs|inc|xbm|yml|cgi|uu|e2x|skip|packlist|eg|cfg|html|pub|enc|all|ini|po|pot)$/i or /^\w+$/") | less in the install tree (both top one and F<sitelib> one). Compress all the DLLs with F<lxlite>. The tiny F<.exe> can be compressed with C</c:max> (the bug only appears when there is a fixup in the last 6 bytes of a page (?); since the tiny executables are much smaller than a page, the bug will not hit). Do not compress C<perl_.exe> - it would not work under DOS. =item 9. Now you can generate the binary distribution. This is done by running the test of the CPAN distribution C<OS2::SoftInstaller>. Tune up the file F<test.pl> to suit the layout of current version of Perl first. Do not forget to pack the necessary external DLLs accordingly. Include the description of the bugs and test suite failures you could not fix. Include the small-stack versions of Perl executables from Perl build directory. Include F<perl5.def> so that people can relink the perl DLL preserving the binary compatibility, or can create compatibility DLLs. Include the diff files (C<diff -pu old new>) of fixes you did so that people can rebuild your version. Include F<perl5.map> so that one can use remote debugging. =item 10. Share what you did with the other people. Relax. Enjoy fruits of your work. =item 11. Brace yourself for thanks, bug reports, hate mail and spam coming as result of the previous step. No good deed should remain unpunished! =back =head1 Building custom F<.EXE> files The Perl executables can be easily rebuilt at any moment. Moreover, one can use the I<embedding> interface (see L<perlembed>) to make very customized executables. =head2 Making executables with a custom collection of statically loaded extensions It is a little bit easier to do so while I<decreasing> the list of statically loaded extensions. We discuss this case only here. =over =item 1. Change to an empty directory, and create a placeholder <Makefile.PL>: use ExtUtils::MakeMaker; WriteMakefile NAME => 'dummy'; =item 2. Run it with the flavor of Perl (F<perl.exe> or F<perl_.exe>) you want to rebuild. perl_ Makefile.PL =item 3. Ask it to create new Perl executable: make perl (you may need to manually add C<PERLTYPE=-DPERL_CORE> to this commandline on some versions of Perl; the symptom is that the command-line globbing does not work from OS/2 shells with the newly-compiled executable; check with .\perl.exe -wle "print for @ARGV" * ). =item 4. The previous step created F<perlmain.c> which contains a list of newXS() calls near the end. Removing unnecessary calls, and rerunning make perl will produce a customized executable. =back =head2 Making executables with a custom search-paths The default perl executable is flexible enough to support most usages. However, one may want something yet more flexible; for example, one may want to find Perl DLL relatively to the location of the EXE file; or one may want to ignore the environment when setting the Perl-library search patch, etc. If you fill comfortable with I<embedding> interface (see L<perlembed>), such things are easy to do repeating the steps outlined in L/<Making executables with a custom collection of statically loaded extensions>, and doing more comprehensive edits to main() of F<perlmain.c>. The people with little desire to understand Perl can just rename main(), and do necessary modification in a custom main() which calls the renamed function in appropriate time. However, there is a third way: perl DLL exports the main() function and several callbacks to customize the search path. Below is a complete example of a "Perl loader" which =over =item 1. Looks for Perl DLL in the directory C<$exedir/../dll>; =item 2. Prepends the above directory to C<BEGINLIBPATH>; =item 3. Fails if the Perl DLL found via C<BEGINLIBPATH> is different from what was loaded on step 1; e.g., another process could have loaded it from C<LIBPATH> or from a different value of C<BEGINLIBPATH>. In these cases one needs to modify the setting of the system so that this other process either does not run, or loads the DLL from C<BEGINLIBPATH> with C<LIBPATHSTRICT=T> (available with kernels after September 2000). =item 4. Loads Perl library from C<$exedir/../dll/lib/>. =item 5. Uses Bourne shell from C<$exedir/../dll/sh/ksh.exe>. =back For best results compile the C file below with the same options as the Perl DLL. However, a lot of functionality will work even if the executable is not an EMX applications, e.g., if compiled with gcc -Wall -DDOSISH -DOS2=1 -O2 -s -Zomf -Zsys perl-starter.c \ -DPERL_DLL_BASENAME=\"perl312F\" -Zstack 8192 -Zlinker /PM:VIO Here is the sample C file: #define INCL_DOS #define INCL_NOPM /* These are needed for compile if os2.h includes os2tk.h, not * os2emx.h */ #define INCL_DOSPROCESS #include <os2.h> #include "EXTERN.h" #define PERL_IN_MINIPERLMAIN_C #include "perl.h" static char *me; HMODULE handle; static void die_with(char *msg1, char *msg2, char *msg3, char *msg4) { ULONG c; char *s = " error: "; DosWrite(2, me, strlen(me), &c); DosWrite(2, s, strlen(s), &c); DosWrite(2, msg1, strlen(msg1), &c); DosWrite(2, msg2, strlen(msg2), &c); DosWrite(2, msg3, strlen(msg3), &c); DosWrite(2, msg4, strlen(msg4), &c); DosWrite(2, "\r\n", 2, &c); exit(255); } typedef ULONG (*fill_extLibpath_t)(int type, char *pre, char *post, int replace, char *msg); typedef int (*main_t)(int type, char *argv[], char *env[]); typedef int (*handler_t)(void* data, int which); #ifndef PERL_DLL_BASENAME # define PERL_DLL_BASENAME "perl" #endif static HMODULE load_perl_dll(char *basename) { char buf[300], fail[260]; STRLEN l, dirl; fill_extLibpath_t f; ULONG rc_fullname; HMODULE handle, handle1; if (_execname(buf, sizeof(buf) - 13) != 0) die_with("Can't find full path: ", strerror(errno), "", ""); /* XXXX Fill 'me' with new value */ l = strlen(buf); while (l && buf[l-1] != '/' && buf[l-1] != '\\') l--; dirl = l - 1; strcpy(buf + l, basename); l += strlen(basename); strcpy(buf + l, ".dll"); if ( (rc_fullname = DosLoadModule(fail, sizeof fail, buf, &handle)) != 0 && DosLoadModule(fail, sizeof fail, basename, &handle) != 0 ) die_with("Can't load DLL ", buf, "", ""); if (rc_fullname) return handle; /* was loaded with short name; all is fine */ if (DosQueryProcAddr(handle, 0, "fill_extLibpath", (PFN*)&f)) die_with(buf, ": DLL exports no symbol ", "fill_extLibpath", ""); buf[dirl] = 0; if (f(0 /*BEGINLIBPATH*/, buf /* prepend */, NULL /* append */, 0 /* keep old value */, me)) die_with(me, ": prepending BEGINLIBPATH", "", ""); if (DosLoadModule(fail, sizeof fail, basename, &handle1) != 0) die_with(me, ": finding perl DLL again via BEGINLIBPATH", "", ""); buf[dirl] = '\\'; if (handle1 != handle) { if (DosQueryModuleName(handle1, sizeof(fail), fail)) strcpy(fail, "???"); die_with(buf, ":\n\tperl DLL via BEGINLIBPATH is different: \n\t", fail, "\n\tYou may need to manipulate global BEGINLIBPATH" " and LIBPATHSTRICT" "\n\tso that the other copy is loaded via" BEGINLIBPATH."); } return handle; } int main(int argc, char **argv, char **env) { main_t f; handler_t h; me = argv[0]; /**/ handle = load_perl_dll(PERL_DLL_BASENAME); if (DosQueryProcAddr(handle, 0, "Perl_OS2_handler_install", (PFN*)&h)) die_with(PERL_DLL_BASENAME, ": DLL exports no symbol ", "Perl_OS2_handler_install", ""); if ( !h((void *)"~installprefix", Perlos2_handler_perllib_from) || !h((void *)"~dll", Perlos2_handler_perllib_to) || !h((void *)"~dll/sh/ksh.exe", Perlos2_handler_perl_sh) ) die_with(PERL_DLL_BASENAME, ": Can't install @INC manglers", "", ""); if (DosQueryProcAddr(handle, 0, "dll_perlmain", (PFN*)&f)) die_with(PERL_DLL_BASENAME, ": DLL exports no symbol ", "dll_perlmain", ""); return f(argc, argv, env); } =head1 Build FAQ =head2 Some C</> became C<\> in pdksh. You have a very old pdksh. See L</Prerequisites>. =head2 C<'errno'> - unresolved external You do not have MT-safe F<db.lib>. See L</Prerequisites>. =head2 Problems with tr or sed reported with very old version of tr and sed. =head2 Some problem (forget which ;-) You have an older version of F<perl.dll> on your LIBPATH, which broke the build of extensions. =head2 Library ... not found You did not run C<omflibs>. See L</Prerequisites>. =head2 Segfault in make You use an old version of GNU make. See L</Prerequisites>. =head2 op/sprintf test failure This can result from a bug in emx sprintf which was fixed in 0.9d fix 03. =head1 Specific (mis)features of OS/2 port =head2 C<setpriority>, C<getpriority> Note that these functions are compatible with *nix, not with the older ports of '94 - 95. The priorities are absolute, go from 32 to -95, lower is quicker. 0 is the default priority. B<WARNING>. Calling C<getpriority> on a non-existing process could lock the system before Warp3 fixpak22. Starting with Warp3, Perl will use a workaround: it aborts getpriority() if the process is not present. This is not possible on older versions C<2.*>, and has a race condition anyway. =head2 C<system()> Multi-argument form of C<system()> allows an additional numeric argument. The meaning of this argument is described in L<OS2::Process>. When finding a program to run, Perl first asks the OS to look for executables on C<PATH> (OS/2 adds extension F<.exe> if no extension is present). If not found, it looks for a script with possible extensions added in this order: no extension, F<.cmd>, F<.btm>, F<.bat>, F<.pl>. If found, Perl checks the start of the file for magic strings C<"#!"> and C<"extproc ">. If found, Perl uses the rest of the first line as the beginning of the command line to run this script. The only mangling done to the first line is extraction of arguments (currently up to 3), and ignoring of the path-part of the "interpreter" name if it can't be found using the full path. E.g., C<system 'foo', 'bar', 'baz'> may lead Perl to finding F<C:/emx/bin/foo.cmd> with the first line being extproc /bin/bash -x -c If F</bin/bash.exe> is not found, then Perl looks for an executable F<bash.exe> on C<PATH>. If found in F<C:/emx.add/bin/bash.exe>, then the above system() is translated to system qw(C:/emx.add/bin/bash.exe -x -c C:/emx/bin/foo.cmd bar baz) One additional translation is performed: instead of F</bin/sh> Perl uses the hardwired-or-customized shell (see L</"C<PERL_SH_DIR>">). The above search for "interpreter" is recursive: if F<bash> executable is not found, but F<bash.btm> is found, Perl will investigate its first line etc. The only hardwired limit on the recursion depth is implicit: there is a limit 4 on the number of additional arguments inserted before the actual arguments given to system(). In particular, if no additional arguments are specified on the "magic" first lines, then the limit on the depth is 4. If Perl finds that the found executable is of PM type when the current session is not, it will start the new process in a separate session of necessary type. Call via C<OS2::Process> to disable this magic. B<WARNING>. Due to the described logic, you need to explicitly specify F<.com> extension if needed. Moreover, if the executable F<perl5.6.1> is requested, Perl will not look for F<perl5.6.1.exe>. [This may change in the future.] =head2 C<extproc> on the first line If the first chars of a Perl script are C<"extproc ">, this line is treated as C<#!>-line, thus all the switches on this line are processed (twice if script was started via cmd.exe). See L<perlrun/DESCRIPTION>. =head2 Additional modules: L<OS2::Process>, L<OS2::DLL>, L<OS2::REXX>, L<OS2::PrfDB>, L<OS2::ExtAttr>. These modules provide access to additional numeric argument for C<system> and to the information about the running process, to DLLs having functions with REXX signature and to the REXX runtime, to OS/2 databases in the F<.INI> format, and to Extended Attributes. Two additional extensions by Andreas Kaiser, C<OS2::UPM>, and C<OS2::FTP>, are included into C<ILYAZ> directory, mirrored on CPAN. Other OS/2-related extensions are available too. =head2 Prebuilt methods: =over 4 =item C<File::Copy::syscopy> used by C<File::Copy::copy>, see L<File::Copy>. =item C<DynaLoader::mod2fname> used by C<DynaLoader> for DLL name mangling. =item C<Cwd::current_drive()> Self explanatory. =item C<Cwd::sys_chdir(name)> leaves drive as it is. =item C<Cwd::change_drive(name)> changes the "current" drive. =item C<Cwd::sys_is_absolute(name)> means has drive letter and is_rooted. =item C<Cwd::sys_is_rooted(name)> means has leading C<[/\\]> (maybe after a drive-letter:). =item C<Cwd::sys_is_relative(name)> means changes with current dir. =item C<Cwd::sys_cwd(name)> Interface to cwd from EMX. Used by C<Cwd::cwd>. =item C<Cwd::sys_abspath(name, dir)> Really really odious function to implement. Returns absolute name of file which would have C<name> if CWD were C<dir>. C<Dir> defaults to the current dir. =item C<Cwd::extLibpath([type])> Get current value of extended library search path. If C<type> is present and positive, works with C<END_LIBPATH>, if negative, works with C<LIBPATHSTRICT>, otherwise with C<BEGIN_LIBPATH>. =item C<Cwd::extLibpath_set( path [, type ] )> Set current value of extended library search path. If C<type> is present and positive, works with <END_LIBPATH>, if negative, works with C<LIBPATHSTRICT>, otherwise with C<BEGIN_LIBPATH>. =item C<OS2::Error(do_harderror,do_exception)> Returns C<undef> if it was not called yet, otherwise bit 1 is set if on the previous call do_harderror was enabled, bit 2 is set if on previous call do_exception was enabled. This function enables/disables error popups associated with hardware errors (Disk not ready etc.) and software exceptions. I know of no way to find out the state of popups I<before> the first call to this function. =item C<OS2::Errors2Drive(drive)> Returns C<undef> if it was not called yet, otherwise return false if errors were not requested to be written to a hard drive, or the drive letter if this was requested. This function may redirect error popups associated with hardware errors (Disk not ready etc.) and software exceptions to the file POPUPLOG.OS2 at the root directory of the specified drive. Overrides OS2::Error() specified by individual programs. Given argument undef will disable redirection. Has global effect, persists after the application exits. I know of no way to find out the state of redirection of popups to the disk I<before> the first call to this function. =item OS2::SysInfo() Returns a hash with system information. The keys of the hash are MAX_PATH_LENGTH, MAX_TEXT_SESSIONS, MAX_PM_SESSIONS, MAX_VDM_SESSIONS, BOOT_DRIVE, DYN_PRI_VARIATION, MAX_WAIT, MIN_SLICE, MAX_SLICE, PAGE_SIZE, VERSION_MAJOR, VERSION_MINOR, VERSION_REVISION, MS_COUNT, TIME_LOW, TIME_HIGH, TOTPHYSMEM, TOTRESMEM, TOTAVAILMEM, MAXPRMEM, MAXSHMEM, TIMER_INTERVAL, MAX_COMP_LENGTH, FOREGROUND_FS_SESSION, FOREGROUND_PROCESS =item OS2::BootDrive() Returns a letter without colon. =item C<OS2::MorphPM(serve)>, C<OS2::UnMorphPM(serve)> Transforms the current application into a PM application and back. The argument true means that a real message loop is going to be served. OS2::MorphPM() returns the PM message queue handle as an integer. See L</"Centralized management of resources"> for additional details. =item C<OS2::Serve_Messages(force)> Fake on-demand retrieval of outstanding PM messages. If C<force> is false, will not dispatch messages if a real message loop is known to be present. Returns number of messages retrieved. Dies with "QUITing..." if WM_QUIT message is obtained. =item C<OS2::Process_Messages(force [, cnt])> Retrieval of PM messages until window creation/destruction. If C<force> is false, will not dispatch messages if a real message loop is known to be present. Returns change in number of windows. If C<cnt> is given, it is incremented by the number of messages retrieved. Dies with "QUITing..." if WM_QUIT message is obtained. =item C<OS2::_control87(new,mask)> the same as L<_control87(3)> of EMX. Takes integers as arguments, returns the previous coprocessor control word as an integer. Only bits in C<new> which are present in C<mask> are changed in the control word. =item OS2::get_control87() gets the coprocessor control word as an integer. =item C<OS2::set_control87_em(new=MCW_EM,mask=MCW_EM)> The variant of OS2::_control87() with default values good for handling exception mask: if no C<mask>, uses exception mask part of C<new> only. If no C<new>, disables all the floating point exceptions. See L</"Misfeatures"> for details. =item C<OS2::DLLname([how [, \&xsub]])> Gives the information about the Perl DLL or the DLL containing the C function bound to by C<&xsub>. The meaning of C<how> is: default (2): full name; 0: handle; 1: module name. =back (Note that some of these may be moved to different libraries - eventually). =head2 Prebuilt variables: =over 4 =item $OS2::emx_rev numeric value is the same as _emx_rev of EMX, a string value the same as _emx_vprt (similar to C<0.9c>). =item $OS2::emx_env same as _emx_env of EMX, a number similar to 0x8001. =item $OS2::os_ver a number C<OS_MAJOR + 0.001 * OS_MINOR>. =item $OS2::is_aout true if the Perl library was compiled in AOUT format. =item $OS2::can_fork true if the current executable is an AOUT EMX executable, so Perl can fork. Do not use this, use the portable check for $Config::Config{dfork}. =item $OS2::nsyserror This variable (default is 1) controls whether to enforce the contents of $^E to start with C<SYS0003>-like id. If set to 0, then the string value of $^E is what is available from the OS/2 message file. (Some messages in this file have an C<SYS0003>-like id prepended, some not.) =back =head2 Misfeatures =over 4 =item * Since L<flock(3)> is present in EMX, but is not functional, it is emulated by perl. To disable the emulations, set environment variable C<USE_PERL_FLOCK=0>. =item * Here is the list of things which may be "broken" on EMX (from EMX docs): =over 4 =item * The functions L<recvmsg(3)>, L<sendmsg(3)>, and L<socketpair(3)> are not implemented. =item * L<sock_init(3)> is not required and not implemented. =item * L<flock(3)> is not yet implemented (dummy function). (Perl has a workaround.) =item * L<kill(3)>: Special treatment of PID=0, PID=1 and PID=-1 is not implemented. =item * L<waitpid(3)>: WUNTRACED Not implemented. waitpid() is not implemented for negative values of PID. =back Note that C<kill -9> does not work with the current version of EMX. =item * See L</"Text-mode filehandles">. =item * Unix-domain sockets on OS/2 live in a pseudo-file-system C</sockets/...>. To avoid a failure to create a socket with a name of a different form, C<"/socket/"> is prepended to the socket name (unless it starts with this already). This may lead to problems later in case the socket is accessed via the "usual" file-system calls using the "initial" name. =item * Apparently, IBM used a compiler (for some period of time around '95?) which changes FP mask right and left. This is not I<that> bad for IBM's programs, but the same compiler was used for DLLs which are used with general-purpose applications. When these DLLs are used, the state of floating-point flags in the application is not predictable. What is much worse, some DLLs change the floating point flags when in _DLLInitTerm() (e.g., F<TCP32IP>). This means that even if you do not I<call> any function in the DLL, just the act of loading this DLL will reset your flags. What is worse, the same compiler was used to compile some HOOK DLLs. Given that HOOK dlls are executed in the context of I<all> the applications in the system, this means a complete unpredictability of floating point flags on systems using such HOOK DLLs. E.g., F<GAMESRVR.DLL> of B<DIVE> origin changes the floating point flags on each write to the TTY of a VIO (windowed text-mode) applications. Some other (not completely debugged) situations when FP flags change include some video drivers (?), and some operations related to creation of the windows. People who code B<OpenGL> may have more experience on this. Perl is generally used in the situation when all the floating-point exceptions are ignored, as is the default under EMX. If they are not ignored, some benign Perl programs would get a C<SIGFPE> and would die a horrible death. To circumvent this, Perl uses two hacks. They help against I<one> type of damage only: FP flags changed when loading a DLL. One of the hacks is to disable floating point exceptions on Perl startup (as is the default with EMX). This helps only with compile-time-linked DLLs changing the flags before main() had a chance to be called. The other hack is to restore FP flags after a call to dlopen(). This helps against similar damage done by DLLs _DLLInitTerm() at runtime. Currently no way to switch these hacks off is provided. =back =head2 Modifications Perl modifies some standard C library calls in the following ways: =over 9 =item C<popen> C<my_popen> uses F<sh.exe> if shell is required, cf. L</"C<PERL_SH_DIR>">. =item C<tmpnam> is created using C<TMP> or C<TEMP> environment variable, via C<tempnam>. =item C<tmpfile> If the current directory is not writable, file is created using modified C<tmpnam>, so there may be a race condition. =item C<ctermid> a dummy implementation. =item C<stat> C<os2_stat> special-cases F</dev/tty> and F</dev/con>. =item C<mkdir>, C<rmdir> these EMX functions do not work if the path contains a trailing C</>. Perl contains a workaround for this. =item C<flock> Since L<flock(3)> is present in EMX, but is not functional, it is emulated by perl. To disable the emulations, set environment variable C<USE_PERL_FLOCK=0>. =back =head2 Identifying DLLs All the DLLs built with the current versions of Perl have ID strings identifying the name of the extension, its version, and the version of Perl required for this DLL. Run C<bldlevel DLL-name> to find this info. =head2 Centralized management of resources Since to call certain OS/2 API one needs to have a correctly initialized C<Win> subsystem, OS/2-specific extensions may require getting C<HAB>s and C<HMQ>s. If an extension would do it on its own, another extension could fail to initialize. Perl provides a centralized management of these resources: =over =item C<HAB> To get the HAB, the extension should call C<hab = perl_hab_GET()> in C. After this call is performed, C<hab> may be accessed as C<Perl_hab>. There is no need to release the HAB after it is used. If by some reasons F<perl.h> cannot be included, use extern int Perl_hab_GET(void); instead. =item C<HMQ> There are two cases: =over =item * the extension needs an C<HMQ> only because some API will not work otherwise. Use C<serve = 0> below. =item * the extension needs an C<HMQ> since it wants to engage in a PM event loop. Use C<serve = 1> below. =back To get an C<HMQ>, the extension should call C<hmq = perl_hmq_GET(serve)> in C. After this call is performed, C<hmq> may be accessed as C<Perl_hmq>. To signal to Perl that HMQ is not needed any more, call C<perl_hmq_UNSET(serve)>. Perl process will automatically morph/unmorph itself into/from a PM process if HMQ is needed/not-needed. Perl will automatically enable/disable C<WM_QUIT> message during shutdown if the message queue is served/not-served. B<NOTE>. If during a shutdown there is a message queue which did not disable WM_QUIT, and which did not process the received WM_QUIT message, the shutdown will be automatically cancelled. Do not call C<perl_hmq_GET(1)> unless you are going to process messages on an orderly basis. =item Treating errors reported by OS/2 API There are two principal conventions (it is useful to call them C<Dos*> and C<Win*> - though this part of the function signature is not always determined by the name of the API) of reporting the error conditions of OS/2 API. Most of C<Dos*> APIs report the error code as the result of the call (so 0 means success, and there are many types of errors). Most of C<Win*> API report success/fail via the result being C<TRUE>/C<FALSE>; to find the reason for the failure one should call WinGetLastError() API. Some C<Win*> entry points also overload a "meaningful" return value with the error indicator; having a 0 return value indicates an error. Yet some other C<Win*> entry points overload things even more, and 0 return value may mean a successful call returning a valid value 0, as well as an error condition; in the case of a 0 return value one should call WinGetLastError() API to distinguish a successful call from a failing one. By convention, all the calls to OS/2 API should indicate their failures by resetting $^E. All the Perl-accessible functions which call OS/2 API may be broken into two classes: some die()s when an API error is encountered, the other report the error via a false return value (of course, this does not concern Perl-accessible functions which I<expect> a failure of the OS/2 API call, having some workarounds coded). Obviously, in the situation of the last type of the signature of an OS/2 API, it is must more convenient for the users if the failure is indicated by die()ing: one does not need to check $^E to know that something went wrong. If, however, this solution is not desirable by some reason, the code in question should reset $^E to 0 before making this OS/2 API call, so that the caller of this Perl-accessible function has a chance to distinguish a success-but-0-return value from a failure. (One may return undef as an alternative way of reporting an error.) The macros to simplify this type of error propagation are =over =item C<CheckOSError(expr)> Returns true on error, sets $^E. Expects expr() be a call of C<Dos*>-style API. =item C<CheckWinError(expr)> Returns true on error, sets $^E. Expects expr() be a call of C<Win*>-style API. =item C<SaveWinError(expr)> Returns C<expr>, sets $^E from WinGetLastError() if C<expr> is false. =item C<SaveCroakWinError(expr,die,name1,name2)> Returns C<expr>, sets $^E from WinGetLastError() if C<expr> is false, and die()s if C<die> and $^E are true. The message to die is the concatenated strings C<name1> and C<name2>, separated by C<": "> from the contents of $^E. =item C<WinError_2_Perl_rc> Sets C<Perl_rc> to the return value of WinGetLastError(). =item C<FillWinError> Sets C<Perl_rc> to the return value of WinGetLastError(), and sets $^E to the corresponding value. =item C<FillOSError(rc)> Sets C<Perl_rc> to C<rc>, and sets $^E to the corresponding value. =back =item Loading DLLs and ordinals in DLLs Some DLLs are only present in some versions of OS/2, or in some configurations of OS/2. Some exported entry points are present only in DLLs shipped with some versions of OS/2. If these DLLs and entry points were linked directly for a Perl executable/DLL or from a Perl extensions, this binary would work only with the specified versions/setups. Even if these entry points were not needed, the I<load> of the executable (or DLL) would fail. For example, many newer useful APIs are not present in OS/2 v2; many PM-related APIs require DLLs not available on floppy-boot setup. To make these calls fail I<only when the calls are executed>, one should call these API via a dynamic linking API. There is a subsystem in Perl to simplify such type of calls. A large number of entry points available for such linking is provided (see C<entries_ordinals> - and also C<PMWIN_entries> - in F<os2ish.h>). These ordinals can be accessed via the APIs: CallORD(), DeclFuncByORD(), DeclVoidFuncByORD(), DeclOSFuncByORD(), DeclWinFuncByORD(), AssignFuncPByORD(), DeclWinFuncByORD_CACHE(), DeclWinFuncByORD_CACHE_survive(), DeclWinFuncByORD_CACHE_resetError_survive(), DeclWinFunc_CACHE(), DeclWinFunc_CACHE_resetError(), DeclWinFunc_CACHE_survive(), DeclWinFunc_CACHE_resetError_survive() See the header files and the C code in the supplied OS/2-related modules for the details on usage of these functions. Some of these functions also combine dynaloading semantic with the error-propagation semantic discussed above. =back =head1 Perl flavors Because of idiosyncrasies of OS/2 one cannot have all the eggs in the same basket (though EMX environment tries hard to overcome this limitations, so the situation may somehow improve). There are 4 executables for Perl provided by the distribution: =head2 F<perl.exe> The main workhorse. This is a chimera executable: it is compiled as an C<a.out>-style executable, but is linked with C<omf>-style dynamic library F<perl.dll>, and with dynamic CRT DLL. This executable is a VIO application. It can load perl dynamic extensions, and it can fork(). B<Note.> Keep in mind that fork() is needed to open a pipe to yourself. =head2 F<perl_.exe> This is a statically linked C<a.out>-style executable. It cannot load dynamic Perl extensions. The executable supplied in binary distributions has a lot of extensions prebuilt, thus the above restriction is important only if you use custom-built extensions. This executable is a VIO application. I<This is the only executable with does not require OS/2.> The friends locked into C<M$> world would appreciate the fact that this executable runs under DOS, Win0.3*, Win0.95 and WinNT with an appropriate extender. See L</"Other OSes">. =head2 F<perl__.exe> This is the same executable as F<perl___.exe>, but it is a PM application. B<Note.> Usually (unless explicitly redirected during the startup) STDIN, STDERR, and STDOUT of a PM application are redirected to F<nul>. However, it is possible to I<see> them if you start C<perl__.exe> from a PM program which emulates a console window, like I<Shell mode> of Emacs or EPM. Thus it I<is possible> to use Perl debugger (see L<perldebug>) to debug your PM application (but beware of the message loop lockups - this will not work if you have a message queue to serve, unless you hook the serving into the getc() function of the debugger). Another way to see the output of a PM program is to run it as pm_prog args 2>&1 | cat - with a shell I<different> from F<cmd.exe>, so that it does not create a link between a VIO session and the session of C<pm_porg>. (Such a link closes the VIO window.) E.g., this works with F<sh.exe> - or with Perl! open P, 'pm_prog args 2>&1 |' or die; print while <P>; The flavor F<perl__.exe> is required if you want to start your program without a VIO window present, but not C<detach>ed (run C<help detach> for more info). Very useful for extensions which use PM, like C<Perl/Tk> or C<OpenGL>. Note also that the differences between PM and VIO executables are only in the I<default> behaviour. One can start I<any> executable in I<any> kind of session by using the arguments C</fs>, C</pm> or C</win> switches of the command C<start> (of F<CMD.EXE> or a similar shell). Alternatively, one can use the numeric first argument of the C<system> Perl function (see L<OS2::Process>). =head2 F<perl___.exe> This is an C<omf>-style executable which is dynamically linked to F<perl.dll> and CRT DLL. I know no advantages of this executable over C<perl.exe>, but it cannot fork() at all. Well, one advantage is that the build process is not so convoluted as with C<perl.exe>. It is a VIO application. =head2 Why strange names? Since Perl processes the C<#!>-line (cf. L<perlrun/DESCRIPTION>, L<perlrun/Command Switches>, L<perldiag/"No Perl script found in input">), it should know when a program I<is a Perl>. There is some naming convention which allows Perl to distinguish correct lines from wrong ones. The above names are almost the only names allowed by this convention which do not contain digits (which have absolutely different semantics). =head2 Why dynamic linking? Well, having several executables dynamically linked to the same huge library has its advantages, but this would not substantiate the additional work to make it compile. The reason is the complicated-to-developers but very quick and convenient-to-users "hard" dynamic linking used by OS/2. There are two distinctive features of the dyna-linking model of OS/2: first, all the references to external functions are resolved at the compile time; second, there is no runtime fixup of the DLLs after they are loaded into memory. The first feature is an enormous advantage over other models: it avoids conflicts when several DLLs used by an application export entries with the same name. In such cases "other" models of dyna-linking just choose between these two entry points using some random criterion - with predictable disasters as results. But it is the second feature which requires the build of F<perl.dll>. The address tables of DLLs are patched only once, when they are loaded. The addresses of the entry points into DLLs are guaranteed to be the same for all the programs which use the same DLL. This removes the runtime fixup - once DLL is loaded, its code is read-only. While this allows some (significant?) performance advantages, this makes life much harder for developers, since the above scheme makes it impossible for a DLL to be "linked" to a symbol in the F<.EXE> file. Indeed, this would need a DLL to have different relocations tables for the (different) executables which use this DLL. However, a dynamically loaded Perl extension is forced to use some symbols from the perl executable, e.g., to know how to find the arguments to the functions: the arguments live on the perl internal evaluation stack. The solution is to put the main code of the interpreter into a DLL, and make the F<.EXE> file which just loads this DLL into memory and supplies command-arguments. The extension DLL cannot link to symbols in F<.EXE>, but it has no problem linking to symbols in the F<.DLL>. This I<greatly> increases the load time for the application (as well as complexity of the compilation). Since interpreter is in a DLL, the C RTL is basically forced to reside in a DLL as well (otherwise extensions would not be able to use CRT). There are some advantages if you use different flavors of perl, such as running F<perl.exe> and F<perl__.exe> simultaneously: they share the memory of F<perl.dll>. B<NOTE>. There is one additional effect which makes DLLs more wasteful: DLLs are loaded in the shared memory region, which is a scarse resource given the 512M barrier of the "standard" OS/2 virtual memory. The code of F<.EXE> files is also shared by all the processes which use the particular F<.EXE>, but they are "shared in the private address space of the process"; this is possible because the address at which different sections of the F<.EXE> file are loaded is decided at compile-time, thus all the processes have these sections loaded at same addresses, and no fixup of internal links inside the F<.EXE> is needed. Since DLLs may be loaded at run time, to have the same mechanism for DLLs one needs to have the address range of I<any of the loaded> DLLs in the system to be available I<in all the processes> which did not load a particular DLL yet. This is why the DLLs are mapped to the shared memory region. =head2 Why chimera build? Current EMX environment does not allow DLLs compiled using Unixish C<a.out> format to export symbols for data (or at least some types of data). This forces C<omf>-style compile of F<perl.dll>. Current EMX environment does not allow F<.EXE> files compiled in C<omf> format to fork(). fork() is needed for exactly three Perl operations: =over 4 =item * explicit fork() in the script, =item * C<open FH, "|-"> =item * C<open FH, "-|">, in other words, opening pipes to itself. =back While these operations are not questions of life and death, they are needed for a lot of useful scripts. This forces C<a.out>-style compile of F<perl.exe>. =head1 ENVIRONMENT Here we list environment variables with are either OS/2- and DOS- and Win*-specific, or are more important under OS/2 than under other OSes. =head2 C<PERLLIB_PREFIX> Specific for EMX port. Should have the form path1;path2 or path1 path2 If the beginning of some prebuilt path matches F<path1>, it is substituted with F<path2>. Should be used if the perl library is moved from the default location in preference to C<PERL(5)LIB>, since this would not leave wrong entries in @INC. For example, if the compiled version of perl looks for @INC in F<f:/perllib/lib>, and you want to install the library in F<h:/opt/gnu>, do set PERLLIB_PREFIX=f:/perllib/lib;h:/opt/gnu This will cause Perl with the prebuilt @INC of f:/perllib/lib/5.00553/os2 f:/perllib/lib/5.00553 f:/perllib/lib/site_perl/5.00553/os2 f:/perllib/lib/site_perl/5.00553 . to use the following @INC: h:/opt/gnu/5.00553/os2 h:/opt/gnu/5.00553 h:/opt/gnu/site_perl/5.00553/os2 h:/opt/gnu/site_perl/5.00553 . =head2 C<PERL_BADLANG> If 0, perl ignores setlocale() failing. May be useful with some strange I<locale>s. =head2 C<PERL_BADFREE> If 0, perl would not warn of in case of unwarranted free(). With older perls this might be useful in conjunction with the module DB_File, which was buggy when dynamically linked and OMF-built. Should not be set with newer Perls, since this may hide some I<real> problems. =head2 C<PERL_SH_DIR> Specific for EMX port. Gives the directory part of the location for F<sh.exe>. =head2 C<USE_PERL_FLOCK> Specific for EMX port. Since L<flock(3)> is present in EMX, but is not functional, it is emulated by perl. To disable the emulations, set environment variable C<USE_PERL_FLOCK=0>. =head2 C<TMP> or C<TEMP> Specific for EMX port. Used as storage place for temporary files. =head1 Evolution Here we list major changes which could make you by surprise. =head2 Text-mode filehandles Starting from version 5.8, Perl uses a builtin translation layer for text-mode files. This replaces the efficient well-tested EMX layer by some code which should be best characterized as a "quick hack". In addition to possible bugs and an inability to follow changes to the translation policy with off/on switches of TERMIO translation, this introduces a serious incompatible change: before sysread() on text-mode filehandles would go through the translation layer, now it would not. =head2 Priorities C<setpriority> and C<getpriority> are not compatible with earlier ports by Andreas Kaiser. See C<"setpriority, getpriority">. =head2 DLL name mangling: pre 5.6.2 With the release 5.003_01 the dynamically loadable libraries should be rebuilt when a different version of Perl is compiled. In particular, DLLs (including F<perl.dll>) are now created with the names which contain a checksum, thus allowing workaround for OS/2 scheme of caching DLLs. It may be possible to code a simple workaround which would =over =item * find the old DLLs looking through the old @INC; =item * mangle the names according to the scheme of new perl and copy the DLLs to these names; =item * edit the internal C<LX> tables of DLL to reflect the change of the name (probably not needed for Perl extension DLLs, since the internally coded names are not used for "specific" DLLs, they used only for "global" DLLs). =item * edit the internal C<IMPORT> tables and change the name of the "old" F<perl????.dll> to the "new" F<perl????.dll>. =back =head2 DLL name mangling: 5.6.2 and beyond In fact mangling of I<extension> DLLs was done due to misunderstanding of the OS/2 dynaloading model. OS/2 (effectively) maintains two different tables of loaded DLL: =over =item Global DLLs those loaded by the base name from C<LIBPATH>; including those associated at link time; =item specific DLLs loaded by the full name. =back When resolving a request for a global DLL, the table of already-loaded specific DLLs is (effectively) ignored; moreover, specific DLLs are I<always> loaded from the prescribed path. There is/was a minor twist which makes this scheme fragile: what to do with DLLs loaded from =over =item C<BEGINLIBPATH> and C<ENDLIBPATH> (which depend on the process) =item F<.> from C<LIBPATH> which I<effectively> depends on the process (although C<LIBPATH> is the same for all the processes). =back Unless C<LIBPATHSTRICT> is set to C<T> (and the kernel is after 2000/09/01), such DLLs are considered to be global. When loading a global DLL it is first looked in the table of already-loaded global DLLs. Because of this the fact that one executable loaded a DLL from C<BEGINLIBPATH> and C<ENDLIBPATH>, or F<.> from C<LIBPATH> may affect I<which> DLL is loaded when I<another> executable requests a DLL with the same name. I<This> is the reason for version-specific mangling of the DLL name for perl DLL. Since the Perl extension DLLs are always loaded with the full path, there is no need to mangle their names in a version-specific ways: their directory already reflects the corresponding version of perl, and @INC takes into account binary compatibility with older version. Starting from C<5.6.2> the name mangling scheme is fixed to be the same as for Perl 5.005_53 (same as in a popular binary release). Thus new Perls will be able to I<resolve the names> of old extension DLLs if @INC allows finding their directories. However, this still does not guarantee that these DLL may be loaded. The reason is the mangling of the name of the I<Perl DLL>. And since the extension DLLs link with the Perl DLL, extension DLLs for older versions would load an older Perl DLL, and would most probably segfault (since the data in this DLL is not properly initialized). There is a partial workaround (which can be made complete with newer OS/2 kernels): create a forwarder DLL with the same name as the DLL of the older version of Perl, which forwards the entry points to the newer Perl's DLL. Make this DLL accessible on (say) the C<BEGINLIBPATH> of the new Perl executable. When the new executable accesses old Perl's extension DLLs, they would request the old Perl's DLL by name, get the forwarder instead, so effectively will link with the currently running (new) Perl DLL. This may break in two ways: =over =item * Old perl executable is started when a new executable is running has loaded an extension compiled for the old executable (ouph!). In this case the old executable will get a forwarder DLL instead of the old perl DLL, so would link with the new perl DLL. While not directly fatal, it will behave the same as new executable. This beats the whole purpose of explicitly starting an old executable. =item * A new executable loads an extension compiled for the old executable when an old perl executable is running. In this case the extension will not pick up the forwarder - with fatal results. =back With support for C<LIBPATHSTRICT> this may be circumvented - unless one of DLLs is started from F<.> from C<LIBPATH> (I do not know whether C<LIBPATHSTRICT> affects this case). B<REMARK>. Unless newer kernels allow F<.> in C<BEGINLIBPATH> (older do not), this mess cannot be completely cleaned. (It turns out that as of the beginning of 2002, F<.> is not allowed, but F<.\.> is - and it has the same effect.) B<REMARK>. C<LIBPATHSTRICT>, C<BEGINLIBPATH> and C<ENDLIBPATH> are not environment variables, although F<cmd.exe> emulates them on C<SET ...> lines. From Perl they may be accessed by L<Cwd::extLibpath|/Cwd::extLibpath([type])> and L<Cwd::extLibpath_set|/Cwd::extLibpath_set( path [, type ] )>. =head2 DLL forwarder generation Assume that the old DLL is named F<perlE0AC.dll> (as is one for 5.005_53), and the new version is 5.6.1. Create a file F<perl5shim.def-leader> with LIBRARY 'perlE0AC' INITINSTANCE TERMINSTANCE DESCRIPTION '@#perl5-porters@perl.org:5.006001#@ Perl module for 5.00553 -> Perl 5.6.1 forwarder' CODE LOADONCALL DATA LOADONCALL NONSHARED MULTIPLE EXPORTS modifying the versions/names as needed. Run perl -wnle "next if 0../EXPORTS/; print qq( \"$1\") if /\"(\w+)\"/" perl5.def >lst in the Perl build directory (to make the DLL smaller replace perl5.def with the definition file for the older version of Perl if present). cat perl5shim.def-leader lst >perl5shim.def gcc -Zomf -Zdll -o perlE0AC.dll perl5shim.def -s -llibperl (ignore multiple C<warning L4085>). =head2 Threading As of release 5.003_01 perl is linked to multithreaded C RTL DLL. If perl itself is not compiled multithread-enabled, so will not be perl's malloc(). However, extensions may use multiple thread on their own risk. This was needed to compile C<Perl/Tk> for XFree86-OS/2 out-of-the-box, and link with DLLs for other useful libraries, which typically are compiled with C<-Zmt -Zcrtdll>. =head2 Calls to external programs Due to a popular demand the perl external program calling has been changed wrt Andreas Kaiser's port. I<If> perl needs to call an external program I<via shell>, the F<f:/bin/sh.exe> will be called, or whatever is the override, see L</"C<PERL_SH_DIR>">. Thus means that you need to get some copy of a F<sh.exe> as well (I use one from pdksh). The path F<F:/bin> above is set up automatically during the build to a correct value on the builder machine, but is overridable at runtime, B<Reasons:> a consensus on C<perl5-porters> was that perl should use one non-overridable shell per platform. The obvious choices for OS/2 are F<cmd.exe> and F<sh.exe>. Having perl build itself would be impossible with F<cmd.exe> as a shell, thus I picked up C<sh.exe>. This assures almost 100% compatibility with the scripts coming from *nix. As an added benefit this works as well under DOS if you use DOS-enabled port of pdksh (see L</Prerequisites>). B<Disadvantages:> currently F<sh.exe> of pdksh calls external programs via fork()/exec(), and there is I<no> functioning exec() on OS/2. exec() is emulated by EMX by an asynchronous call while the caller waits for child completion (to pretend that the C<pid> did not change). This means that 1 I<extra> copy of F<sh.exe> is made active via fork()/exec(), which may lead to some resources taken from the system (even if we do not count extra work needed for fork()ing). Note that this a lesser issue now when we do not spawn F<sh.exe> unless needed (metachars found). One can always start F<cmd.exe> explicitly via system 'cmd', '/c', 'mycmd', 'arg1', 'arg2', ... If you need to use F<cmd.exe>, and do not want to hand-edit thousands of your scripts, the long-term solution proposed on p5-p is to have a directive use OS2::Cmd; which will override system(), exec(), C<``>, and C<open(,'...|')>. With current perl you may override only system(), readpipe() - the explicit version of C<``>, and maybe exec(). The code will substitute the one-argument call to system() by C<CORE::system('cmd.exe', '/c', shift)>. If you have some working code for C<OS2::Cmd>, please send it to me, I will include it into distribution. I have no need for such a module, so cannot test it. For the details of the current situation with calling external programs, see L</Starting OSE<sol>2 (and DOS) programs under Perl>. Set us mention a couple of features: =over 4 =item * External scripts may be called by their basename. Perl will try the same extensions as when processing B<-S> command-line switch. =item * External scripts starting with C<#!> or C<extproc > will be executed directly, without calling the shell, by calling the program specified on the rest of the first line. =back =head2 Memory allocation Perl uses its own malloc() under OS/2 - interpreters are usually malloc-bound for speed, but perl is not, since its malloc is lightning-fast. Perl-memory-usage-tuned benchmarks show that Perl's malloc is 5 times quicker than EMX one. I do not have convincing data about memory footprint, but a (pretty random) benchmark showed that Perl's one is 5% better. Combination of perl's malloc() and rigid DLL name resolution creates a special problem with library functions which expect their return value to be free()d by system's free(). To facilitate extensions which need to call such functions, system memory-allocation functions are still available with the prefix C<emx_> added. (Currently only DLL perl has this, it should propagate to F<perl_.exe> shortly.) =head2 Threads One can build perl with thread support enabled by providing C<-D usethreads> option to F<Configure>. Currently OS/2 support of threads is very preliminary. Most notable problems: =over 4 =item C<COND_WAIT> may have a race condition (but probably does not due to edge-triggered nature of OS/2 Event semaphores). (Needs a reimplementation (in terms of chaining waiting threads, with the linked list stored in per-thread structure?)?) =item F<os2.c> has a couple of static variables used in OS/2-specific functions. (Need to be moved to per-thread structure, or serialized?) =back Note that these problems should not discourage experimenting, since they have a low probability of affecting small programs. =head1 BUGS This description is not updated often (since 5.6.1?), see F<./os2/Changes> for more info. =cut OS/2 extensions ~~~~~~~~~~~~~~~ I include 3 extensions by Andreas Kaiser, OS2::REXX, OS2::UPM, and OS2::FTP, into my ftp directory, mirrored on CPAN. I made some minor changes needed to compile them by standard tools. I cannot test UPM and FTP, so I will appreciate your feedback. Other extensions there are OS2::ExtAttr, OS2::PrfDB for tied access to EAs and .INI files - and maybe some other extensions at the time you read it. Note that OS2 perl defines 2 pseudo-extension functions OS2::Copy::copy and DynaLoader::mod2fname (many more now, see L</Prebuilt methods>). The -R switch of older perl is deprecated. If you need to call a REXX code which needs access to variables, include the call into a REXX compartment created by REXX_call {...block...}; Two new functions are supported by REXX code, REXX_eval 'string'; REXX_eval_with 'string', REXX_function_name => \&perl_sub_reference; If you have some other extensions you want to share, send the code to me. At least two are available: tied access to EA's, and tied access to system databases. =head1 AUTHOR Ilya Zakharevich, cpan@ilyaz.org =head1 SEE ALSO perl(1). =cut perlclib.pod 0000644 00000022607 15125556335 0007065 0 ustar 00 =head1 NAME perlclib - Internal replacements for standard C library functions =head1 DESCRIPTION One thing Perl porters should note is that F<perl> doesn't tend to use that much of the C standard library internally; you'll see very little use of, for example, the F<ctype.h> functions in there. This is because Perl tends to reimplement or abstract standard library functions, so that we know exactly how they're going to operate. This is a reference card for people who are familiar with the C library and who want to do things the Perl way; to tell them which functions they ought to use instead of the more normal C functions. =head2 Conventions In the following tables: =over 3 =item C<t> is a type. =item C<p> is a pointer. =item C<n> is a number. =item C<s> is a string. =back C<sv>, C<av>, C<hv>, etc. represent variables of their respective types. =head2 File Operations Instead of the F<stdio.h> functions, you should use the Perl abstraction layer. Instead of C<FILE*> types, you need to be handling C<PerlIO*> types. Don't forget that with the new PerlIO layered I/O abstraction C<FILE*> types may not even be available. See also the C<perlapio> documentation for more information about the following functions: Instead Of: Use: stdin PerlIO_stdin() stdout PerlIO_stdout() stderr PerlIO_stderr() fopen(fn, mode) PerlIO_open(fn, mode) freopen(fn, mode, stream) PerlIO_reopen(fn, mode, perlio) (Dep- recated) fflush(stream) PerlIO_flush(perlio) fclose(stream) PerlIO_close(perlio) =head2 File Input and Output Instead Of: Use: fprintf(stream, fmt, ...) PerlIO_printf(perlio, fmt, ...) [f]getc(stream) PerlIO_getc(perlio) [f]putc(stream, n) PerlIO_putc(perlio, n) ungetc(n, stream) PerlIO_ungetc(perlio, n) Note that the PerlIO equivalents of C<fread> and C<fwrite> are slightly different from their C library counterparts: fread(p, size, n, stream) PerlIO_read(perlio, buf, numbytes) fwrite(p, size, n, stream) PerlIO_write(perlio, buf, numbytes) fputs(s, stream) PerlIO_puts(perlio, s) There is no equivalent to C<fgets>; one should use C<sv_gets> instead: fgets(s, n, stream) sv_gets(sv, perlio, append) =head2 File Positioning Instead Of: Use: feof(stream) PerlIO_eof(perlio) fseek(stream, n, whence) PerlIO_seek(perlio, n, whence) rewind(stream) PerlIO_rewind(perlio) fgetpos(stream, p) PerlIO_getpos(perlio, sv) fsetpos(stream, p) PerlIO_setpos(perlio, sv) ferror(stream) PerlIO_error(perlio) clearerr(stream) PerlIO_clearerr(perlio) =head2 Memory Management and String Handling Instead Of: Use: t* p = malloc(n) Newx(p, n, t) t* p = calloc(n, s) Newxz(p, n, t) p = realloc(p, n) Renew(p, n, t) memcpy(dst, src, n) Copy(src, dst, n, t) memmove(dst, src, n) Move(src, dst, n, t) memcpy(dst, src, sizeof(t)) StructCopy(src, dst, t) memset(dst, 0, n * sizeof(t)) Zero(dst, n, t) memzero(dst, 0) Zero(dst, n, char) free(p) Safefree(p) strdup(p) savepv(p) strndup(p, n) savepvn(p, n) (Hey, strndup doesn't exist!) strstr(big, little) instr(big, little) strcmp(s1, s2) strLE(s1, s2) / strEQ(s1, s2) / strGT(s1,s2) strncmp(s1, s2, n) strnNE(s1, s2, n) / strnEQ(s1, s2, n) memcmp(p1, p2, n) memNE(p1, p2, n) !memcmp(p1, p2, n) memEQ(p1, p2, n) Notice the different order of arguments to C<Copy> and C<Move> than used in C<memcpy> and C<memmove>. Most of the time, though, you'll want to be dealing with SVs internally instead of raw C<char *> strings: strlen(s) sv_len(sv) strcpy(dt, src) sv_setpv(sv, s) strncpy(dt, src, n) sv_setpvn(sv, s, n) strcat(dt, src) sv_catpv(sv, s) strncat(dt, src) sv_catpvn(sv, s) sprintf(s, fmt, ...) sv_setpvf(sv, fmt, ...) Note also the existence of C<sv_catpvf> and C<sv_vcatpvfn>, combining concatenation with formatting. Sometimes instead of zeroing the allocated heap by using Newxz() you should consider "poisoning" the data. This means writing a bit pattern into it that should be illegal as pointers (and floating point numbers), and also hopefully surprising enough as integers, so that any code attempting to use the data without forethought will break sooner rather than later. Poisoning can be done using the Poison() macros, which have similar arguments to Zero(): PoisonWith(dst, n, t, b) scribble memory with byte b PoisonNew(dst, n, t) equal to PoisonWith(dst, n, t, 0xAB) PoisonFree(dst, n, t) equal to PoisonWith(dst, n, t, 0xEF) Poison(dst, n, t) equal to PoisonFree(dst, n, t) =head2 Character Class Tests There are several types of character class tests that Perl implements. The only ones described here are those that directly correspond to C library functions that operate on 8-bit characters, but there are equivalents that operate on wide characters, and UTF-8 encoded strings. All are more fully described in L<perlapi/Character classification> and L<perlapi/Character case changing>. The C library routines listed in the table below return values based on the current locale. Use the entries in the final column for that functionality. The other two columns always assume a POSIX (or C) locale. The entries in the ASCII column are only meaningful for ASCII inputs, returning FALSE for anything else. Use these only when you B<know> that is what you want. The entries in the Latin1 column assume that the non-ASCII 8-bit characters are as Unicode defines, them, the same as ISO-8859-1, often called Latin 1. Instead Of: Use for ASCII: Use for Latin1: Use for locale: isalnum(c) isALPHANUMERIC(c) isALPHANUMERIC_L1(c) isALPHANUMERIC_LC(c) isalpha(c) isALPHA(c) isALPHA_L1(c) isALPHA_LC(u ) isascii(c) isASCII(c) isASCII_LC(c) isblank(c) isBLANK(c) isBLANK_L1(c) isBLANK_LC(c) iscntrl(c) isCNTRL(c) isCNTRL_L1(c) isCNTRL_LC(c) isdigit(c) isDIGIT(c) isDIGIT_L1(c) isDIGIT_LC(c) isgraph(c) isGRAPH(c) isGRAPH_L1(c) isGRAPH_LC(c) islower(c) isLOWER(c) isLOWER_L1(c) isLOWER_LC(c) isprint(c) isPRINT(c) isPRINT_L1(c) isPRINT_LC(c) ispunct(c) isPUNCT(c) isPUNCT_L1(c) isPUNCT_LC(c) isspace(c) isSPACE(c) isSPACE_L1(c) isSPACE_LC(c) isupper(c) isUPPER(c) isUPPER_L1(c) isUPPER_LC(c) isxdigit(c) isXDIGIT(c) isXDIGIT_L1(c) isXDIGIT_LC(c) tolower(c) toLOWER(c) toLOWER_L1(c) toLOWER_LC(c) toupper(c) toUPPER(c) toUPPER_LC(c) To emphasize that you are operating only on ASCII characters, you can append C<_A> to each of the macros in the ASCII column: C<isALPHA_A>, C<isDIGIT_A>, and so on. (There is no entry in the Latin1 column for C<isascii> even though there is an C<isASCII_L1>, which is identical to C<isASCII>; the latter name is clearer. There is no entry in the Latin1 column for C<toupper> because the result can be non-Latin1. You have to use C<toUPPER_uni>, as described in L<perlapi/Character case changing>.) =head2 F<stdlib.h> functions Instead Of: Use: atof(s) Atof(s) atoi(s) grok_atoUV(s, &uv, &e) atol(s) grok_atoUV(s, &uv, &e) strtod(s, &p) Strtod(s, &p) strtol(s, &p, n) Strtol(s, &p, b) strtoul(s, &p, n) Strtoul(s, &p, b) Typical use is to do range checks on C<uv> before casting: int i; UV uv; char* end_ptr = input_end; if (grok_atoUV(input, &uv, &end_ptr) && uv <= INT_MAX) i = (int)uv; ... /* continue parsing from end_ptr */ } else { ... /* parse error: not a decimal integer in range 0 .. MAX_IV */ } Notice also the C<grok_bin>, C<grok_hex>, and C<grok_oct> functions in F<numeric.c> for converting strings representing numbers in the respective bases into C<NV>s. Note that grok_atoUV() doesn't handle negative inputs, or leading whitespace (being purposefully strict). Note that strtol() and strtoul() may be disguised as Strtol(), Strtoul(), Atol(), Atoul(). Avoid those, too. In theory C<Strtol> and C<Strtoul> may not be defined if the machine perl is built on doesn't actually have strtol and strtoul. But as those 2 functions are part of the 1989 ANSI C spec we suspect you'll find them everywhere by now. int rand() double Drand01() srand(n) { seedDrand01((Rand_seed_t)n); PL_srand_called = TRUE; } exit(n) my_exit(n) system(s) Don't. Look at pp_system or use my_popen. getenv(s) PerlEnv_getenv(s) setenv(s, val) my_setenv(s, val) =head2 Miscellaneous functions You should not even B<want> to use F<setjmp.h> functions, but if you think you do, use the C<JMPENV> stack in F<scope.h> instead. For C<signal>/C<sigaction>, use C<rsignal(signo, handler)>. =head1 SEE ALSO L<perlapi>, L<perlapio>, L<perlguts> perl58delta.pod 0000644 00000340735 15125556335 0007427 0 ustar 00 =head1 NAME perl58delta - what is new for perl v5.8.0 =head1 DESCRIPTION This document describes differences between the 5.6.0 release and the 5.8.0 release. Many of the bug fixes in 5.8.0 were already seen in the 5.6.1 maintenance release since the two releases were kept closely coordinated (while 5.8.0 was still called 5.7.something). Changes that were integrated into the 5.6.1 release are marked C<[561]>. Many of these changes have been further developed since 5.6.1 was released, those are marked C<[561+]>. You can see the list of changes in the 5.6.1 release (both from the 5.005_03 release and the 5.6.0 release) by reading L<perl561delta>. =head1 Highlights In 5.8.0 =over 4 =item * Better Unicode support =item * New IO Implementation =item * New Thread Implementation =item * Better Numeric Accuracy =item * Safe Signals =item * Many New Modules =item * More Extensive Regression Testing =back =head1 Incompatible Changes =head2 Binary Incompatibility B<Perl 5.8 is not binary compatible with earlier releases of Perl.> B<You have to recompile your XS modules.> (Pure Perl modules should continue to work.) The major reason for the discontinuity is the new IO architecture called PerlIO. PerlIO is the default configuration because without it many new features of Perl 5.8 cannot be used. In other words: you just have to recompile your modules containing XS code, sorry about that. In future releases of Perl, non-PerlIO aware XS modules may become completely unsupported. This shouldn't be too difficult for module authors, however: PerlIO has been designed as a drop-in replacement (at the source code level) for the stdio interface. Depending on your platform, there are also other reasons why we decided to break binary compatibility, please read on. =head2 64-bit platforms and malloc If your pointers are 64 bits wide, the Perl malloc is no longer being used because it does not work well with 8-byte pointers. Also, usually the system mallocs on such platforms are much better optimized for such large memory models than the Perl malloc. Some memory-hungry Perl applications like the PDL don't work well with Perl's malloc. Finally, other applications than Perl (such as mod_perl) tend to prefer the system malloc. Such platforms include Alpha and 64-bit HPPA, MIPS, PPC, and Sparc. =head2 AIX Dynaloading The AIX dynaloading now uses in AIX releases 4.3 and newer the native dlopen interface of AIX instead of the old emulated interface. This change will probably break backward compatibility with compiled modules. The change was made to make Perl more compliant with other applications like mod_perl which are using the AIX native interface. =head2 Attributes for C<my> variables now handled at run-time The C<my EXPR : ATTRS> syntax now applies variable attributes at run-time. (Subroutine and C<our> variables still get attributes applied at compile-time.) See L<attributes> for additional details. In particular, however, this allows variable attributes to be useful for C<tie> interfaces, which was a deficiency of earlier releases. Note that the new semantics doesn't work with the Attribute::Handlers module (as of version 0.76). =head2 Socket Extension Dynamic in VMS The Socket extension is now dynamically loaded instead of being statically built in. This may or may not be a problem with ancient TCP/IP stacks of VMS: we do not know since we weren't able to test Perl in such configurations. =head2 IEEE-format Floating Point Default on OpenVMS Alpha Perl now uses IEEE format (T_FLOAT) as the default internal floating point format on OpenVMS Alpha, potentially breaking binary compatibility with external libraries or existing data. G_FLOAT is still available as a configuration option. The default on VAX (D_FLOAT) has not changed. =head2 New Unicode Semantics (no more C<use utf8>, almost) Previously in Perl 5.6 to use Unicode one would say "use utf8" and then the operations (like string concatenation) were Unicode-aware in that lexical scope. This was found to be an inconvenient interface, and in Perl 5.8 the Unicode model has completely changed: now the "Unicodeness" is bound to the data itself, and for most of the time "use utf8" is not needed at all. The only remaining use of "use utf8" is when the Perl script itself has been written in the UTF-8 encoding of Unicode. (UTF-8 has not been made the default since there are many Perl scripts out there that are using various national eight-bit character sets, which would be illegal in UTF-8.) See L<perluniintro> for the explanation of the current model, and L<utf8> for the current use of the utf8 pragma. =head2 New Unicode Properties Unicode I<scripts> are now supported. Scripts are similar to (and superior to) Unicode I<blocks>. The difference between scripts and blocks is that scripts are the glyphs used by a language or a group of languages, while the blocks are more artificial groupings of (mostly) 256 characters based on the Unicode numbering. In general, scripts are more inclusive, but not universally so. For example, while the script C<Latin> includes all the Latin characters and their various diacritic-adorned versions, it does not include the various punctuation or digits (since they are not solely C<Latin>). A number of other properties are now supported, including C<\p{L&}>, C<\p{Any}> C<\p{Assigned}>, C<\p{Unassigned}>, C<\p{Blank}> [561] and C<\p{SpacePerl}> [561] (along with their C<\P{...}> versions, of course). See L<perlunicode> for details, and more additions. The C<In> or C<Is> prefix to names used with the C<\p{...}> and C<\P{...}> are now almost always optional. The only exception is that a C<In> prefix is required to signify a Unicode block when a block name conflicts with a script name. For example, C<\p{Tibetan}> refers to the script, while C<\p{InTibetan}> refers to the block. When there is no name conflict, you can omit the C<In> from the block name (e.g. C<\p{BraillePatterns}>), but to be safe, it's probably best to always use the C<In>). =head2 REF(...) Instead Of SCALAR(...) A reference to a reference now stringifies as "REF(0x81485ec)" instead of "SCALAR(0x81485ec)" in order to be more consistent with the return value of ref(). =head2 pack/unpack D/F recycled The undocumented pack/unpack template letters D/F have been recycled for better use: now they stand for long double (if supported by the platform) and NV (Perl internal floating point type). (They used to be aliases for d/f, but you never knew that.) =head2 glob() now returns filenames in alphabetical order The list of filenames from glob() (or <...>) is now by default sorted alphabetically to be csh-compliant (which is what happened before in most Unix platforms). (bsd_glob() does still sort platform natively, ASCII or EBCDIC, unless GLOB_ALPHASORT is specified.) [561] =head2 Deprecations =over 4 =item * The semantics of bless(REF, REF) were unclear and until someone proves it to make some sense, it is forbidden. =item * The obsolete chat2 library that should never have been allowed to escape the laboratory has been decommissioned. =item * Using chdir("") or chdir(undef) instead of explicit chdir() is doubtful. A failure (think chdir(some_function()) can lead into unintended chdir() to the home directory, therefore this behaviour is deprecated. =item * The builtin dump() function has probably outlived most of its usefulness. The core-dumping functionality will remain in future available as an explicit call to C<CORE::dump()>, but in future releases the behaviour of an unqualified C<dump()> call may change. =item * The very dusty examples in the eg/ directory have been removed. Suggestions for new shiny examples welcome but the main issue is that the examples need to be documented, tested and (most importantly) maintained. =item * The (bogus) escape sequences \8 and \9 now give an optional warning ("Unrecognized escape passed through"). There is no need to \-escape any C<\w> character. =item * The *glob{FILEHANDLE} is deprecated, use *glob{IO} instead. =item * The C<package;> syntax (C<package> without an argument) has been deprecated. Its semantics were never that clear and its implementation even less so. If you have used that feature to disallow all but fully qualified variables, C<use strict;> instead. =item * The unimplemented POSIX regex features [[.cc.]] and [[=c=]] are still recognised but now cause fatal errors. The previous behaviour of ignoring them by default and warning if requested was unacceptable since it, in a way, falsely promised that the features could be used. =item * In future releases, non-PerlIO aware XS modules may become completely unsupported. Since PerlIO is a drop-in replacement for stdio at the source code level, this shouldn't be that drastic a change. =item * Previous versions of perl and some readings of some sections of Camel III implied that the C<:raw> "discipline" was the inverse of C<:crlf>. Turning off "clrfness" is no longer enough to make a stream truly binary. So the PerlIO C<:raw> layer (or "discipline", to use the Camel book's older terminology) is now formally defined as being equivalent to binmode(FH) - which is in turn defined as doing whatever is necessary to pass each byte as-is without any translation. In particular binmode(FH) - and hence C<:raw> - will now turn off both CRLF and UTF-8 translation and remove other layers (e.g. :encoding()) which would modify byte stream. =item * The current user-visible implementation of pseudo-hashes (the weird use of the first array element) is deprecated starting from Perl 5.8.0 and will be removed in Perl 5.10.0, and the feature will be implemented differently. Not only is the current interface rather ugly, but the current implementation slows down normal array and hash use quite noticeably. The C<fields> pragma interface will remain available. The I<restricted hashes> interface is expected to be the replacement interface (see L<Hash::Util>). If your existing programs depends on the underlying implementation, consider using L<Class::PseudoHash> from CPAN. =item * The syntaxes C<< @a->[...] >> and C<< %h->{...} >> have now been deprecated. =item * After years of trying, suidperl is considered to be too complex to ever be considered truly secure. The suidperl functionality is likely to be removed in a future release. =item * The 5.005 threads model (module C<Thread>) is deprecated and expected to be removed in Perl 5.10. Multithreaded code should be migrated to the new ithreads model (see L<threads>, L<threads::shared> and L<perlthrtut>). =item * The long deprecated uppercase aliases for the string comparison operators (EQ, NE, LT, LE, GE, GT) have now been removed. =item * The tr///C and tr///U features have been removed and will not return; the interface was a mistake. Sorry about that. For similar functionality, see pack('U0', ...) and pack('C0', ...). [561] =item * Earlier Perls treated "sub foo (@bar)" as equivalent to "sub foo (@)". The prototypes are now checked better at compile-time for invalid syntax. An optional warning is generated ("Illegal character in prototype...") but this may be upgraded to a fatal error in a future release. =item * The C<exec LIST> and C<system LIST> operations now produce warnings on tainted data and in some future release they will produce fatal errors. =item * The existing behaviour when localising tied arrays and hashes is wrong, and will be changed in a future release, so do not rely on the existing behaviour. See L</"Localising Tied Arrays and Hashes Is Broken">. =back =head1 Core Enhancements =head2 Unicode Overhaul Unicode in general should be now much more usable than in Perl 5.6.0 (or even in 5.6.1). Unicode can be used in hash keys, Unicode in regular expressions should work now, Unicode in tr/// should work now, Unicode in I/O should work now. See L<perluniintro> for introduction and L<perlunicode> for details. =over 4 =item * The Unicode Character Database coming with Perl has been upgraded to Unicode 3.2.0. For more information, see http://www.unicode.org/ . [561+] (5.6.1 has UCD 3.0.1.) =item * For developers interested in enhancing Perl's Unicode capabilities: almost all the UCD files are included with the Perl distribution in the F<lib/unicore> subdirectory. The most notable omission, for space considerations, is the Unihan database. =item * The properties \p{Blank} and \p{SpacePerl} have been added. "Blank" is like C isblank(), that is, it contains only "horizontal whitespace" (the space character is, the newline isn't), and the "SpacePerl" is the Unicode equivalent of C<\s> (\p{Space} isn't, since that includes the vertical tabulator character, whereas C<\s> doesn't.) See "New Unicode Properties" earlier in this document for additional information on changes with Unicode properties. =back =head2 PerlIO is Now The Default =over 4 =item * IO is now by default done via PerlIO rather than system's "stdio". PerlIO allows "layers" to be "pushed" onto a file handle to alter the handle's behaviour. Layers can be specified at open time via 3-arg form of open: open($fh,'>:crlf :utf8', $path) || ... or on already opened handles via extended C<binmode>: binmode($fh,':encoding(iso-8859-7)'); The built-in layers are: unix (low level read/write), stdio (as in previous Perls), perlio (re-implementation of stdio buffering in a portable manner), crlf (does CRLF <=> "\n" translation as on Win32, but available on any platform). A mmap layer may be available if platform supports it (mostly Unixes). Layers to be applied by default may be specified via the 'open' pragma. See L</"Installation and Configuration Improvements"> for the effects of PerlIO on your architecture name. =item * If your platform supports fork(), you can use the list form of C<open> for pipes. For example: open KID_PS, "-|", "ps", "aux" or die $!; forks the ps(1) command (without spawning a shell, as there are more than three arguments to open()), and reads its standard output via the C<KID_PS> filehandle. See L<perlipc>. =item * File handles can be marked as accepting Perl's internal encoding of Unicode (UTF-8 or UTF-EBCDIC depending on platform) by a pseudo layer ":utf8" : open($fh,">:utf8","Uni.txt"); Note for EBCDIC users: the pseudo layer ":utf8" is erroneously named for you since it's not UTF-8 what you will be getting but instead UTF-EBCDIC. See L<perlunicode>, L<utf8>, and http://www.unicode.org/unicode/reports/tr16/ for more information. In future releases this naming may change. See L<perluniintro> for more information about UTF-8. =item * If your environment variables (LC_ALL, LC_CTYPE, LANG) look like you want to use UTF-8 (any of the variables match C</utf-?8/i>), your STDIN, STDOUT, STDERR handles and the default open layer (see L<open>) are marked as UTF-8. (This feature, like other new features that combine Unicode and I/O, work only if you are using PerlIO, but that's the default.) Note that after this Perl really does assume that everything is UTF-8: for example if some input handle is not, Perl will probably very soon complain about the input data like this "Malformed UTF-8 ..." since any old eight-bit data is not legal UTF-8. Note for code authors: if you want to enable your users to use UTF-8 as their default encoding but in your code still have eight-bit I/O streams (such as images or zip files), you need to explicitly open() or binmode() with C<:bytes> (see L<perlfunc/open> and L<perlfunc/binmode>), or you can just use C<binmode(FH)> (nice for pre-5.8.0 backward compatibility). =item * File handles can translate character encodings from/to Perl's internal Unicode form on read/write via the ":encoding()" layer. =item * File handles can be opened to "in memory" files held in Perl scalars via: open($fh,'>', \$variable) || ... =item * Anonymous temporary files are available without need to 'use FileHandle' or other module via open($fh,"+>", undef) || ... That is a literal undef, not an undefined value. =back =head2 ithreads The new interpreter threads ("ithreads" for short) implementation of multithreading, by Arthur Bergman, replaces the old "5.005 threads" implementation. In the ithreads model any data sharing between threads must be explicit, as opposed to the model where data sharing was implicit. See L<threads> and L<threads::shared>, and L<perlthrtut>. As a part of the ithreads implementation Perl will also use any necessary and detectable reentrant libc interfaces. =head2 Restricted Hashes A restricted hash is restricted to a certain set of keys, no keys outside the set can be added. Also individual keys can be restricted so that the key cannot be deleted and the value cannot be changed. No new syntax is involved: the Hash::Util module is the interface. =head2 Safe Signals Perl used to be fragile in that signals arriving at inopportune moments could corrupt Perl's internal state. Now Perl postpones handling of signals until it's safe (between opcodes). This change may have surprising side effects because signals no longer interrupt Perl instantly. Perl will now first finish whatever it was doing, like finishing an internal operation (like sort()) or an external operation (like an I/O operation), and only then look at any arrived signals (and before starting the next operation). No more corrupt internal state since the current operation is always finished first, but the signal may take more time to get heard. Note that breaking out from potentially blocking operations should still work, though. =head2 Understanding of Numbers In general a lot of fixing has happened in the area of Perl's understanding of numbers, both integer and floating point. Since in many systems the standard number parsing functions like C<strtoul()> and C<atof()> seem to have bugs, Perl tries to work around their deficiencies. This results hopefully in more accurate numbers. Perl now tries internally to use integer values in numeric conversions and basic arithmetics (+ - * /) if the arguments are integers, and tries also to keep the results stored internally as integers. This change leads to often slightly faster and always less lossy arithmetics. (Previously Perl always preferred floating point numbers in its math.) =head2 Arrays now always interpolate into double-quoted strings [561] In double-quoted strings, arrays now interpolate, no matter what. The behavior in earlier versions of perl 5 was that arrays would interpolate into strings if the array had been mentioned before the string was compiled, and otherwise Perl would raise a fatal compile-time error. In versions 5.000 through 5.003, the error was Literal @example now requires backslash In versions 5.004_01 through 5.6.0, the error was In string, @example now must be written as \@example The idea here was to get people into the habit of writing C<"fred\@example.com"> when they wanted a literal C<@> sign, just as they have always written C<"Give me back my \$5"> when they wanted a literal C<$> sign. Starting with 5.6.1, when Perl now sees an C<@> sign in a double-quoted string, it I<always> attempts to interpolate an array, regardless of whether or not the array has been used or declared already. The fatal error has been downgraded to an optional warning: Possible unintended interpolation of @example in string This warns you that C<"fred@example.com"> is going to turn into C<fred.com> if you don't backslash the C<@>. See http://perl.plover.com/at-error.html for more details about the history here. =head2 Miscellaneous Changes =over 4 =item * AUTOLOAD is now lvaluable, meaning that you can add the :lvalue attribute to AUTOLOAD subroutines and you can assign to the AUTOLOAD return value. =item * The $Config{byteorder} (and corresponding BYTEORDER in config.h) was previously wrong in platforms if sizeof(long) was 4, but sizeof(IV) was 8. The byteorder was only sizeof(long) bytes long (1234 or 4321), but now it is correctly sizeof(IV) bytes long, (12345678 or 87654321). (This problem didn't affect Windows platforms.) Also, $Config{byteorder} is now computed dynamically--this is more robust with "fat binaries" where an executable image contains binaries for more than one binary platform, and when cross-compiling. =item * C<perl -d:Module=arg,arg,arg> now works (previously one couldn't pass in multiple arguments.) =item * C<do> followed by a bareword now ensures that this bareword isn't a keyword (to avoid a bug where C<do q(foo.pl)> tried to call a subroutine called C<q>). This means that for example instead of C<do format()> you must write C<do &format()>. =item * The builtin dump() now gives an optional warning C<dump() better written as CORE::dump()>, meaning that by default C<dump(...)> is resolved as the builtin dump() which dumps core and aborts, not as (possibly) user-defined C<sub dump>. To call the latter, qualify the call as C<&dump(...)>. (The whole dump() feature is to considered deprecated, and possibly removed/changed in future releases.) =item * chomp() and chop() are now overridable. Note, however, that their prototype (as given by C<prototype("CORE::chomp")> is undefined, because it cannot be expressed and therefore one cannot really write replacements to override these builtins. =item * END blocks are now run even if you exit/die in a BEGIN block. Internally, the execution of END blocks is now controlled by PL_exit_flags & PERL_EXIT_DESTRUCT_END. This enables the new behaviour for Perl embedders. This will default in 5.10. See L<perlembed>. =item * Formats now support zero-padded decimal fields. =item * Although "you shouldn't do that", it was possible to write code that depends on Perl's hashed key order (Data::Dumper does this). The new algorithm "One-at-a-Time" produces a different hashed key order. More details are in L</"Performance Enhancements">. =item * lstat(FILEHANDLE) now gives a warning because the operation makes no sense. In future releases this may become a fatal error. =item * Spurious syntax errors generated in certain situations, when glob() caused File::Glob to be loaded for the first time, have been fixed. [561] =item * Lvalue subroutines can now return C<undef> in list context. However, the lvalue subroutine feature still remains experimental. [561+] =item * A lost warning "Can't declare ... dereference in my" has been restored (Perl had it earlier but it became lost in later releases.) =item * A new special regular expression variable has been introduced: C<$^N>, which contains the most-recently closed group (submatch). =item * C<no Module;> does not produce an error even if Module does not have an unimport() method. This parallels the behavior of C<use> vis-a-vis C<import>. [561] =item * The numerical comparison operators return C<undef> if either operand is a NaN. Previously the behaviour was unspecified. =item * C<our> can now have an experimental optional attribute C<unique> that affects how global variables are shared among multiple interpreters, see L<perlfunc/our>. =item * The following builtin functions are now overridable: each(), keys(), pop(), push(), shift(), splice(), unshift(). [561] =item * C<pack() / unpack()> can now group template letters with C<()> and then apply repetition/count modifiers on the groups. =item * C<pack() / unpack()> can now process the Perl internal numeric types: IVs, UVs, NVs-- and also long doubles, if supported by the platform. The template letters are C<j>, C<J>, C<F>, and C<D>. =item * C<pack('U0a*', ...)> can now be used to force a string to UTF-8. =item * my __PACKAGE__ $obj now works. [561] =item * POSIX::sleep() now returns the number of I<unslept> seconds (as the POSIX standard says), as opposed to CORE::sleep() which returns the number of slept seconds. =item * printf() and sprintf() now support parameter reordering using the C<%\d+\$> and C<*\d+\$> syntaxes. For example printf "%2\$s %1\$s\n", "foo", "bar"; will print "bar foo\n". This feature helps in writing internationalised software, and in general when the order of the parameters can vary. =item * The (\&) prototype now works properly. [561] =item * prototype(\[$@%&]) is now available to implicitly create references (useful for example if you want to emulate the tie() interface). =item * A new command-line option, C<-t> is available. It is the little brother of C<-T>: instead of dying on taint violations, lexical warnings are given. B<This is only meant as a temporary debugging aid while securing the code of old legacy applications. This is not a substitute for -T.> =item * In other taint news, the C<exec LIST> and C<system LIST> have now been considered too risky (think C<exec @ARGV>: it can start any program with any arguments), and now the said forms cause a warning under lexical warnings. You should carefully launder the arguments to guarantee their validity. In future releases of Perl the forms will become fatal errors so consider starting laundering now. =item * Tied hash interfaces are now required to have the EXISTS and DELETE methods (either own or inherited). =item * If tr/// is just counting characters, it doesn't attempt to modify its target. =item * untie() will now call an UNTIE() hook if it exists. See L<perltie> for details. [561] =item * L<perlfunc/utime> now supports C<utime undef, undef, @files> to change the file timestamps to the current time. =item * The rules for allowing underscores (underbars) in numeric constants have been relaxed and simplified: now you can have an underscore simply B<between digits>. =item * Rather than relying on C's argv[0] (which may not contain a full pathname) where possible $^X is now set by asking the operating system. (eg by reading F</proc/self/exe> on Linux, F</proc/curproc/file> on FreeBSD) =item * A new variable, C<${^TAINT}>, indicates whether taint mode is enabled. =item * You can now override the readline() builtin, and this overrides also the <FILEHANDLE> angle bracket operator. =item * The command-line options -s and -F are now recognized on the shebang (#!) line. =item * Use of the C</c> match modifier without an accompanying C</g> modifier elicits a new warning: C<Use of /c modifier is meaningless without /g>. Use of C</c> in substitutions, even with C</g>, elicits C<Use of /c modifier is meaningless in s///>. Use of C</g> with C<split> elicits C<Use of /g modifier is meaningless in split>. =item * Support for the C<CLONE> special subroutine had been added. With ithreads, when a new thread is created, all Perl data is cloned, however non-Perl data cannot be cloned automatically. In C<CLONE> you can do whatever you need to do, like for example handle the cloning of non-Perl data, if necessary. C<CLONE> will be executed once for every package that has it defined or inherited. It will be called in the context of the new thread, so all modifications are made in the new area. See L<perlmod> =back =head1 Modules and Pragmata =head2 New Modules and Pragmata =over 4 =item * C<Attribute::Handlers>, originally by Damian Conway and now maintained by Arthur Bergman, allows a class to define attribute handlers. package MyPack; use Attribute::Handlers; sub Wolf :ATTR(SCALAR) { print "howl!\n" } # later, in some package using or inheriting from MyPack... my MyPack $Fluffy : Wolf; # the attribute handler Wolf will be called Both variables and routines can have attribute handlers. Handlers can be specific to type (SCALAR, ARRAY, HASH, or CODE), or specific to the exact compilation phase (BEGIN, CHECK, INIT, or END). See L<Attribute::Handlers>. =item * C<B::Concise>, by Stephen McCamant, is a new compiler backend for walking the Perl syntax tree, printing concise info about ops. The output is highly customisable. See L<B::Concise>. [561+] =item * The new bignum, bigint, and bigrat pragmas, by Tels, implement transparent bignum support (using the Math::BigInt, Math::BigFloat, and Math::BigRat backends). =item * C<Class::ISA>, by Sean Burke, is a module for reporting the search path for a class's ISA tree. See L<Class::ISA>. =item * C<Cwd> now has a split personality: if possible, an XS extension is used, (this will hopefully be faster, more secure, and more robust) but if not possible, the familiar Perl implementation is used. =item * C<Devel::PPPort>, originally by Kenneth Albanowski and now maintained by Paul Marquess, has been added. It is primarily used by C<h2xs> to enhance portability of XS modules between different versions of Perl. See L<Devel::PPPort>. =item * C<Digest>, frontend module for calculating digests (checksums), from Gisle Aas, has been added. See L<Digest>. =item * C<Digest::MD5> for calculating MD5 digests (checksums) as defined in RFC 1321, from Gisle Aas, has been added. See L<Digest::MD5>. use Digest::MD5 'md5_hex'; $digest = md5_hex("Thirsty Camel"); print $digest, "\n"; # 01d19d9d2045e005c3f1b80e8b164de1 NOTE: the C<MD5> backward compatibility module is deliberately not included since its further use is discouraged. See also L<PerlIO::via::QuotedPrint>. =item * C<Encode>, originally by Nick Ing-Simmons and now maintained by Dan Kogai, provides a mechanism to translate between different character encodings. Support for Unicode, ISO-8859-1, and ASCII are compiled in to the module. Several other encodings (like the rest of the ISO-8859, CP*/Win*, Mac, KOI8-R, three variants EBCDIC, Chinese, Japanese, and Korean encodings) are included and can be loaded at runtime. (For space considerations, the largest Chinese encodings have been separated into their own CPAN module, Encode::HanExtra, which Encode will use if available). See L<Encode>. Any encoding supported by Encode module is also available to the ":encoding()" layer if PerlIO is used. =item * C<Hash::Util> is the interface to the new I<restricted hashes> feature. (Implemented by Jeffrey Friedl, Nick Ing-Simmons, and Michael Schwern.) See L<Hash::Util>. =item * C<I18N::Langinfo> can be used to query locale information. See L<I18N::Langinfo>. =item * C<I18N::LangTags>, by Sean Burke, has functions for dealing with RFC3066-style language tags. See L<I18N::LangTags>. =item * C<ExtUtils::Constant>, by Nicholas Clark, is a new tool for extension writers for generating XS code to import C header constants. See L<ExtUtils::Constant>. =item * C<Filter::Simple>, by Damian Conway, is an easy-to-use frontend to Filter::Util::Call. See L<Filter::Simple>. # in MyFilter.pm: package MyFilter; use Filter::Simple sub { while (my ($from, $to) = splice @_, 0, 2) { s/$from/$to/g; } }; 1; # in user's code: use MyFilter qr/red/ => 'green'; print "red\n"; # this code is filtered, will print "green\n" print "bored\n"; # this code is filtered, will print "bogreen\n" no MyFilter; print "red\n"; # this code is not filtered, will print "red\n" =item * C<File::Temp>, by Tim Jenness, allows one to create temporary files and directories in an easy, portable, and secure way. See L<File::Temp>. [561+] =item * C<Filter::Util::Call>, by Paul Marquess, provides you with the framework to write I<source filters> in Perl. For most uses, the frontend Filter::Simple is to be preferred. See L<Filter::Util::Call>. =item * C<if>, by Ilya Zakharevich, is a new pragma for conditional inclusion of modules. =item * L<libnet>, by Graham Barr, is a collection of perl5 modules related to network programming. See L<Net::FTP>, L<Net::NNTP>, L<Net::Ping> (not part of libnet, but related), L<Net::POP3>, L<Net::SMTP>, and L<Net::Time>. Perl installation leaves libnet unconfigured; use F<libnetcfg> to configure it. =item * C<List::Util>, by Graham Barr, is a selection of general-utility list subroutines, such as sum(), min(), first(), and shuffle(). See L<List::Util>. =item * C<Locale::Constants>, C<Locale::Country>, C<Locale::Currency> C<Locale::Language>, and L<Locale::Script>, by Neil Bowers, have been added. They provide the codes for various locale standards, such as "fr" for France, "usd" for US Dollar, and "ja" for Japanese. use Locale::Country; $country = code2country('jp'); # $country gets 'Japan' $code = country2code('Norway'); # $code gets 'no' See L<Locale::Constants>, L<Locale::Country>, L<Locale::Currency>, and L<Locale::Language>. =item * C<Locale::Maketext>, by Sean Burke, is a localization framework. See L<Locale::Maketext>, and L<Locale::Maketext::TPJ13>. The latter is an article about software localization, originally published in The Perl Journal #13, and republished here with kind permission. =item * C<Math::BigRat> for big rational numbers, to accompany Math::BigInt and Math::BigFloat, from Tels. See L<Math::BigRat>. =item * C<Memoize> can make your functions faster by trading space for time, from Mark-Jason Dominus. See L<Memoize>. =item * C<MIME::Base64>, by Gisle Aas, allows you to encode data in base64, as defined in RFC 2045 - I<MIME (Multipurpose Internet Mail Extensions)>. use MIME::Base64; $encoded = encode_base64('Aladdin:open sesame'); $decoded = decode_base64($encoded); print $encoded, "\n"; # "QWxhZGRpbjpvcGVuIHNlc2FtZQ==" See L<MIME::Base64>. =item * C<MIME::QuotedPrint>, by Gisle Aas, allows you to encode data in quoted-printable encoding, as defined in RFC 2045 - I<MIME (Multipurpose Internet Mail Extensions)>. use MIME::QuotedPrint; $encoded = encode_qp("\xDE\xAD\xBE\xEF"); $decoded = decode_qp($encoded); print $encoded, "\n"; # "=DE=AD=BE=EF\n" print $decoded, "\n"; # "\xDE\xAD\xBE\xEF\n" See also L<PerlIO::via::QuotedPrint>. =item * C<NEXT>, by Damian Conway, is a pseudo-class for method redispatch. See L<NEXT>. =item * C<open> is a new pragma for setting the default I/O layers for open(). =item * C<PerlIO::scalar>, by Nick Ing-Simmons, provides the implementation of IO to "in memory" Perl scalars as discussed above. It also serves as an example of a loadable PerlIO layer. Other future possibilities include PerlIO::Array and PerlIO::Code. See L<PerlIO::scalar>. =item * C<PerlIO::via>, by Nick Ing-Simmons, acts as a PerlIO layer and wraps PerlIO layer functionality provided by a class (typically implemented in Perl code). =item * C<PerlIO::via::QuotedPrint>, by Elizabeth Mattijsen, is an example of a C<PerlIO::via> class: use PerlIO::via::QuotedPrint; open($fh,">:via(QuotedPrint)",$path); This will automatically convert everything output to C<$fh> to Quoted-Printable. See L<PerlIO::via> and L<PerlIO::via::QuotedPrint>. =item * C<Pod::ParseLink>, by Russ Allbery, has been added, to parse LZ<><> links in pods as described in the new perlpodspec. =item * C<Pod::Text::Overstrike>, by Joe Smith, has been added. It converts POD data to formatted overstrike text. See L<Pod::Text::Overstrike>. [561+] =item * C<Scalar::Util> is a selection of general-utility scalar subroutines, such as blessed(), reftype(), and tainted(). See L<Scalar::Util>. =item * C<sort> is a new pragma for controlling the behaviour of sort(). =item * C<Storable> gives persistence to Perl data structures by allowing the storage and retrieval of Perl data to and from files in a fast and compact binary format. Because in effect Storable does serialisation of Perl data structures, with it you can also clone deep, hierarchical datastructures. Storable was originally created by Raphael Manfredi, but it is now maintained by Abhijit Menon-Sen. Storable has been enhanced to understand the two new hash features, Unicode keys and restricted hashes. See L<Storable>. =item * C<Switch>, by Damian Conway, has been added. Just by saying use Switch; you have C<switch> and C<case> available in Perl. use Switch; switch ($val) { case 1 { print "number 1" } case "a" { print "string a" } case [1..10,42] { print "number in list" } case (@array) { print "number in list" } case /\w+/ { print "pattern" } case qr/\w+/ { print "pattern" } case (%hash) { print "entry in hash" } case (\%hash) { print "entry in hash" } case (\&sub) { print "arg to subroutine" } else { print "previous case not true" } } See L<Switch>. =item * C<Test::More>, by Michael Schwern, is yet another framework for writing test scripts, more extensive than Test::Simple. See L<Test::More>. =item * C<Test::Simple>, by Michael Schwern, has basic utilities for writing tests. See L<Test::Simple>. =item * C<Text::Balanced>, by Damian Conway, has been added, for extracting delimited text sequences from strings. use Text::Balanced 'extract_delimited'; ($a, $b) = extract_delimited("'never say never', he never said", "'", ''); $a will be "'never say never'", $b will be ', he never said'. In addition to extract_delimited(), there are also extract_bracketed(), extract_quotelike(), extract_codeblock(), extract_variable(), extract_tagged(), extract_multiple(), gen_delimited_pat(), and gen_extract_tagged(). With these, you can implement rather advanced parsing algorithms. See L<Text::Balanced>. =item * C<threads>, by Arthur Bergman, is an interface to interpreter threads. Interpreter threads (ithreads) is the new thread model introduced in Perl 5.6 but only available as an internal interface for extension writers (and for Win32 Perl for C<fork()> emulation). See L<threads>, L<threads::shared>, and L<perlthrtut>. =item * C<threads::shared>, by Arthur Bergman, allows data sharing for interpreter threads. See L<threads::shared>. =item * C<Tie::File>, by Mark-Jason Dominus, associates a Perl array with the lines of a file. See L<Tie::File>. =item * C<Tie::Memoize>, by Ilya Zakharevich, provides on-demand loaded hashes. See L<Tie::Memoize>. =item * C<Tie::RefHash::Nestable>, by Edward Avis, allows storing hash references (unlike the standard Tie::RefHash) The module is contained within Tie::RefHash. See L<Tie::RefHash>. =item * C<Time::HiRes>, by Douglas E. Wegscheid, provides high resolution timing (ualarm, usleep, and gettimeofday). See L<Time::HiRes>. =item * C<Unicode::UCD> offers a querying interface to the Unicode Character Database. See L<Unicode::UCD>. =item * C<Unicode::Collate>, by SADAHIRO Tomoyuki, implements the UCA (Unicode Collation Algorithm) for sorting Unicode strings. See L<Unicode::Collate>. =item * C<Unicode::Normalize>, by SADAHIRO Tomoyuki, implements the various Unicode normalization forms. See L<Unicode::Normalize>. =item * C<XS::APItest>, by Tim Jenness, is a test extension that exercises XS APIs. Currently only C<printf()> is tested: how to output various basic data types from XS. =item * C<XS::Typemap>, by Tim Jenness, is a test extension that exercises XS typemaps. Nothing gets installed, but the code is worth studying for extension writers. =back =head2 Updated And Improved Modules and Pragmata =over 4 =item * The following independently supported modules have been updated to the newest versions from CPAN: CGI, CPAN, DB_File, File::Spec, File::Temp, Getopt::Long, Math::BigFloat, Math::BigInt, the podlators bundle (Pod::Man, Pod::Text), Pod::LaTeX [561+], Pod::Parser, Storable, Term::ANSIColor, Test, Text-Tabs+Wrap. =item * attributes::reftype() now works on tied arguments. =item * AutoLoader can now be disabled with C<no AutoLoader;>. =item * B::Deparse has been significantly enhanced by Robin Houston. It can now deparse almost all of the standard test suite (so that the tests still succeed). There is a make target "test.deparse" for trying this out. =item * Carp now has better interface documentation, and the @CARP_NOT interface has been added to get optional control over where errors are reported independently of @ISA, by Ben Tilly. =item * Class::Struct can now define the classes in compile time. =item * Class::Struct now assigns the array/hash element if the accessor is called with an array/hash element as the B<sole> argument. =item * The return value of Cwd::fastcwd() is now tainted. =item * Data::Dumper now has an option to sort hashes. =item * Data::Dumper now has an option to dump code references using B::Deparse. =item * DB_File now supports newer Berkeley DB versions, among other improvements. =item * Devel::Peek now has an interface for the Perl memory statistics (this works only if you are using perl's malloc, and if you have compiled with debugging). =item * The English module can now be used without the infamous performance hit by saying use English '-no_match_vars'; (Assuming, of course, that you don't need the troublesome variables C<$`>, C<$&>, or C<$'>.) Also, introduced C<@LAST_MATCH_START> and C<@LAST_MATCH_END> English aliases for C<@-> and C<@+>. =item * ExtUtils::MakeMaker has been significantly cleaned up and fixed. The enhanced version has also been backported to earlier releases of Perl and submitted to CPAN so that the earlier releases can enjoy the fixes. =item * The arguments of WriteMakefile() in Makefile.PL are now checked for sanity much more carefully than before. This may cause new warnings when modules are being installed. See L<ExtUtils::MakeMaker> for more details. =item * ExtUtils::MakeMaker now uses File::Spec internally, which hopefully leads to better portability. =item * Fcntl, Socket, and Sys::Syslog have been rewritten by Nicholas Clark to use the new-style constant dispatch section (see L<ExtUtils::Constant>). This means that they will be more robust and hopefully faster. =item * File::Find now chdir()s correctly when chasing symbolic links. [561] =item * File::Find now has pre- and post-processing callbacks. It also correctly changes directories when chasing symbolic links. Callbacks (naughtily) exiting with "next;" instead of "return;" now work. =item * File::Find is now (again) reentrant. It also has been made more portable. =item * The warnings issued by File::Find now belong to their own category. You can enable/disable them with C<use/no warnings 'File::Find';>. =item * File::Glob::glob() has been renamed to File::Glob::bsd_glob() because the name clashes with the builtin glob(). The older name is still available for compatibility, but is deprecated. [561] =item * File::Glob now supports C<GLOB_LIMIT> constant to limit the size of the returned list of filenames. =item * IPC::Open3 now allows the use of numeric file descriptors. =item * IO::Socket now has an atmark() method, which returns true if the socket is positioned at the out-of-band mark. The method is also exportable as a sockatmark() function. =item * IO::Socket::INET failed to open the specified port if the service name was not known. It now correctly uses the supplied port number as is. [561] =item * IO::Socket::INET has support for the ReusePort option (if your platform supports it). The Reuse option now has an alias, ReuseAddr. For clarity, you may want to prefer ReuseAddr. =item * IO::Socket::INET now supports a value of zero for C<LocalPort> (usually meaning that the operating system will make one up.) =item * 'use lib' now works identically to @INC. Removing directories with 'no lib' now works. =item * Math::BigFloat and Math::BigInt have undergone a full rewrite by Tels. They are now magnitudes faster, and they support various bignum libraries such as GMP and PARI as their backends. =item * Math::Complex handles inf, NaN etc., better. =item * Net::Ping has been considerably enhanced by Rob Brown: multihoming is now supported, Win32 functionality is better, there is now time measuring functionality (optionally high-resolution using Time::HiRes), and there is now "external" protocol which uses Net::Ping::External module which runs your external ping utility and parses the output. A version of Net::Ping::External is available in CPAN. Note that some of the Net::Ping tests are disabled when running under the Perl distribution since one cannot assume one or more of the following: enabled echo port at localhost, full Internet connectivity, or sympathetic firewalls. You can set the environment variable PERL_TEST_Net_Ping to "1" (one) before running the Perl test suite to enable all the Net::Ping tests. =item * POSIX::sigaction() is now much more flexible and robust. You can now install coderef handlers, 'DEFAULT', and 'IGNORE' handlers, installing new handlers was not atomic. =item * In Safe, C<%INC> is now localised in a Safe compartment so that use/require work. =item * In SDBM_File on DOSish platforms, some keys went missing because of lack of support for files with "holes". A workaround for the problem has been added. =item * In Search::Dict one can now have a pre-processing hook for the lines being searched. =item * The Shell module now has an OO interface. =item * In Sys::Syslog there is now a failover mechanism that will go through alternative connection mechanisms until the message is successfully logged. =item * The Test module has been significantly enhanced. =item * Time::Local::timelocal() does not handle fractional seconds anymore. The rationale is that neither does localtime(), and timelocal() and localtime() are supposed to be inverses of each other. =item * The vars pragma now supports declaring fully qualified variables. (Something that C<our()> does not and will not support.) =item * The C<utf8::> name space (as in the pragma) provides various Perl-callable functions to provide low level access to Perl's internal Unicode representation. At the moment only length() has been implemented. =back =head1 Utility Changes =over 4 =item * Emacs perl mode (emacs/cperl-mode.el) has been updated to version 4.31. =item * F<emacs/e2ctags.pl> is now much faster. =item * C<enc2xs> is a tool for people adding their own encodings to the Encode module. =item * C<h2ph> now supports C trigraphs. =item * C<h2xs> now produces a template README. =item * C<h2xs> now uses C<Devel::PPPort> for better portability between different versions of Perl. =item * C<h2xs> uses the new L<ExtUtils::Constant|ExtUtils::Constant> module which will affect newly created extensions that define constants. Since the new code is more correct (if you have two constants where the first one is a prefix of the second one, the first constant B<never> got defined), less lossy (it uses integers for integer constant, as opposed to the old code that used floating point numbers even for integer constants), and slightly faster, you might want to consider regenerating your extension code (the new scheme makes regenerating easy). L<h2xs> now also supports C trigraphs. =item * C<libnetcfg> has been added to configure libnet. =item * C<perlbug> is now much more robust. It also sends the bug report to perl.org, not perl.com. =item * C<perlcc> has been rewritten and its user interface (that is, command line) is much more like that of the Unix C compiler, cc. (The perlbc tools has been removed. Use C<perlcc -B> instead.) B<Note that perlcc is still considered very experimental and unsupported.> [561] =item * C<perlivp> is a new Installation Verification Procedure utility for running any time after installing Perl. =item * C<piconv> is an implementation of the character conversion utility C<iconv>, demonstrating the new Encode module. =item * C<pod2html> now allows specifying a cache directory. =item * C<pod2html> now produces XHTML 1.0. =item * C<pod2html> now understands POD written using different line endings (PC-like CRLF versus Unix-like LF versus MacClassic-like CR). =item * C<s2p> has been completely rewritten in Perl. (It is in fact a full implementation of sed in Perl: you can use the sed functionality by using the C<psed> utility.) =item * C<xsubpp> now understands POD documentation embedded in the *.xs files. [561] =item * C<xsubpp> now supports the OUT keyword. =back =head1 New Documentation =over 4 =item * perl56delta details the changes between the 5.005 release and the 5.6.0 release. =item * perlclib documents the internal replacements for standard C library functions. (Interesting only for extension writers and Perl core hackers.) [561+] =item * perldebtut is a Perl debugging tutorial. [561+] =item * perlebcdic contains considerations for running Perl on EBCDIC platforms. [561+] =item * perlintro is a gentle introduction to Perl. =item * perliol documents the internals of PerlIO with layers. =item * perlmodstyle is a style guide for writing modules. =item * perlnewmod tells about writing and submitting a new module. [561+] =item * perlpacktut is a pack() tutorial. =item * perlpod has been rewritten to be clearer and to record the best practices gathered over the years. =item * perlpodspec is a more formal specification of the pod format, mainly of interest for writers of pod applications, not to people writing in pod. =item * perlretut is a regular expression tutorial. [561+] =item * perlrequick is a regular expressions quick-start guide. Yes, much quicker than perlretut. [561] =item * perltodo has been updated. =item * perltootc has been renamed as perltooc (to not to conflict with perltoot in filesystems restricted to "8.3" names). =item * perluniintro is an introduction to using Unicode in Perl. (perlunicode is more of a detailed reference and background information) =item * perlutil explains the command line utilities packaged with the Perl distribution. [561+] =back The following platform-specific documents are available before the installation as README.I<platform>, and after the installation as perlI<platform>: perlaix perlamiga perlapollo perlbeos perlbs2000 perlce perlcygwin perldgux perldos perlepoc perlfreebsd perlhpux perlhurd perlirix perlmachten perlmacos perlmint perlmpeix perlnetware perlos2 perlos390 perlplan9 perlqnx perlsolaris perltru64 perluts perlvmesa perlvms perlvos perlwin32 These documents usually detail one or more of the following subjects: configuring, building, testing, installing, and sometimes also using Perl on the said platform. Eastern Asian Perl users are now welcomed in their own languages: README.jp (Japanese), README.ko (Korean), README.cn (simplified Chinese) and README.tw (traditional Chinese), which are written in normal pod but encoded in EUC-JP, EUC-KR, EUC-CN and Big5. These will get installed as perljp perlko perlcn perltw =over 4 =item * The documentation for the POSIX-BC platform is called "BS2000", to avoid confusion with the Perl POSIX module. =item * The documentation for the WinCE platform is called perlce (README.ce in the source code kit), to avoid confusion with the perlwin32 documentation on 8.3-restricted filesystems. =back =head1 Performance Enhancements =over 4 =item * map() could get pathologically slow when the result list it generates is larger than the source list. The performance has been improved for common scenarios. [561] =item * sort() is also fully reentrant, in the sense that the sort function can itself call sort(). This did not work reliably in previous releases. [561] =item * sort() has been changed to use primarily mergesort internally as opposed to the earlier quicksort. For very small lists this may result in slightly slower sorting times, but in general the speedup should be at least 20%. Additional bonuses are that the worst case behaviour of sort() is now better (in computer science terms it now runs in time O(N log N), as opposed to quicksort's Theta(N**2) worst-case run time behaviour), and that sort() is now stable (meaning that elements with identical keys will stay ordered as they were before the sort). See the C<sort> pragma for information. The story in more detail: suppose you want to serve yourself a little slice of Pi. @digits = ( 3,1,4,1,5,9 ); A numerical sort of the digits will yield (1,1,3,4,5,9), as expected. Which C<1> comes first is hard to know, since one C<1> looks pretty much like any other. You can regard this as totally trivial, or somewhat profound. However, if you just want to sort the even digits ahead of the odd ones, then what will sort { ($a % 2) <=> ($b % 2) } @digits; yield? The only even digit, C<4>, will come first. But how about the odd numbers, which all compare equal? With the quicksort algorithm used to implement Perl 5.6 and earlier, the order of ties is left up to the sort. So, as you add more and more digits of Pi, the order in which the sorted even and odd digits appear will change. and, for sufficiently large slices of Pi, the quicksort algorithm in Perl 5.8 won't return the same results even if reinvoked with the same input. The justification for this rests with quicksort's worst case behavior. If you run sort { $a <=> $b } ( 1 .. $N , 1 .. $N ); (something you might approximate if you wanted to merge two sorted arrays using sort), doubling $N doesn't just double the quicksort time, it I<quadruples> it. Quicksort has a worst case run time that can grow like N**2, so-called I<quadratic> behaviour, and it can happen on patterns that may well arise in normal use. You won't notice this for small arrays, but you I<will> notice it with larger arrays, and you may not live long enough for the sort to complete on arrays of a million elements. So the 5.8 quicksort scrambles large arrays before sorting them, as a statistical defence against quadratic behaviour. But that means if you sort the same large array twice, ties may be broken in different ways. Because of the unpredictability of tie-breaking order, and the quadratic worst-case behaviour, quicksort was I<almost> replaced completely with a stable mergesort. I<Stable> means that ties are broken to preserve the original order of appearance in the input array. So sort { ($a % 2) <=> ($b % 2) } (3,1,4,1,5,9); will yield (4,3,1,1,5,9), guaranteed. The even and odd numbers appear in the output in the same order they appeared in the input. Mergesort has worst case O(N log N) behaviour, the best value attainable. And, ironically, this mergesort does particularly well where quicksort goes quadratic: mergesort sorts (1..$N, 1..$N) in O(N) time. But quicksort was rescued at the last moment because it is faster than mergesort on certain inputs and platforms. For example, if you really I<don't> care about the order of even and odd digits, quicksort will run in O(N) time; it's very good at sorting many repetitions of a small number of distinct elements. The quicksort divide and conquer strategy works well on platforms with relatively small, very fast, caches. Eventually, the problem gets whittled down to one that fits in the cache, from which point it benefits from the increased memory speed. Quicksort was rescued by implementing a sort pragma to control aspects of the sort. The B<stable> subpragma forces stable behaviour, regardless of algorithm. The B<_quicksort> and B<_mergesort> subpragmas are heavy-handed ways to select the underlying implementation. The leading C<_> is a reminder that these subpragmas may not survive beyond 5.8. More appropriate mechanisms for selecting the implementation exist, but they wouldn't have arrived in time to save quicksort. =item * Hashes now use Bob Jenkins "One-at-a-Time" hashing key algorithm ( http://burtleburtle.net/bob/hash/doobs.html ). This algorithm is reasonably fast while producing a much better spread of values than the old hashing algorithm (originally by Chris Torek, later tweaked by Ilya Zakharevich). Hash values output from the algorithm on a hash of all 3-char printable ASCII keys comes much closer to passing the DIEHARD random number generation tests. According to perlbench, this change has not affected the overall speed of Perl. =item * unshift() should now be noticeably faster. =back =head1 Installation and Configuration Improvements =head2 Generic Improvements =over 4 =item * INSTALL now explains how you can configure Perl to use 64-bit integers even on non-64-bit platforms. =item * Policy.sh policy change: if you are reusing a Policy.sh file (see INSTALL) and you use Configure -Dprefix=/foo/bar and in the old Policy $prefix eq $siteprefix and $prefix eq $vendorprefix, all of them will now be changed to the new prefix, /foo/bar. (Previously only $prefix changed.) If you do not like this new behaviour, specify prefix, siteprefix, and vendorprefix explicitly. =item * A new optional location for Perl libraries, otherlibdirs, is available. It can be used for example for vendor add-ons without disturbing Perl's own library directories. =item * In many platforms, the vendor-supplied 'cc' is too stripped-down to build Perl (basically, 'cc' doesn't do ANSI C). If this seems to be the case and 'cc' does not seem to be the GNU C compiler 'gcc', an automatic attempt is made to find and use 'gcc' instead. =item * gcc needs to closely track the operating system release to avoid build problems. If Configure finds that gcc was built for a different operating system release than is running, it now gives a clearly visible warning that there may be trouble ahead. =item * Since Perl 5.8 is not binary-compatible with previous releases of Perl, Configure no longer suggests including the 5.005 modules in @INC. =item * Configure C<-S> can now run non-interactively. [561] =item * Configure support for pdp11-style memory models has been removed due to obsolescence. [561] =item * configure.gnu now works with options with whitespace in them. =item * installperl now outputs everything to STDERR. =item * Because PerlIO is now the default on most platforms, "-perlio" doesn't get appended to the $Config{archname} (also known as $^O) anymore. Instead, if you explicitly choose not to use perlio (Configure command line option -Uuseperlio), you will get "-stdio" appended. =item * Another change related to the architecture name is that "-64all" (-Duse64bitall, or "maximally 64-bit") is appended only if your pointers are 64 bits wide. (To be exact, the use64bitall is ignored.) =item * In AFS installations, one can configure the root of the AFS to be somewhere else than the default F</afs> by using the Configure parameter C<-Dafsroot=/some/where/else>. =item * APPLLIB_EXP, a lesser-known configuration-time definition, has been documented. It can be used to prepend site-specific directories to Perl's default search path (@INC); see INSTALL for information. =item * The version of Berkeley DB used when the Perl (and, presumably, the DB_File extension) was built is now available as C<@Config{qw(db_version_major db_version_minor db_version_patch)}> from Perl and as C<DB_VERSION_MAJOR_CFG DB_VERSION_MINOR_CFG DB_VERSION_PATCH_CFG> from C. =item * Building Berkeley DB3 for compatibility modes for DB, NDBM, and ODBM has been documented in INSTALL. =item * If you have CPAN access (either network or a local copy such as a CD-ROM) you can during specify extra modules to Configure to build and install with Perl using the -Dextras=... option. See INSTALL for more details. =item * In addition to config.over, a new override file, config.arch, is available. This file is supposed to be used by hints file writers for architecture-wide changes (as opposed to config.over which is for site-wide changes). =item * If your file system supports symbolic links, you can build Perl outside of the source directory by mkdir perl/build/directory cd perl/build/directory sh /path/to/perl/source/Configure -Dmksymlinks ... This will create in perl/build/directory a tree of symbolic links pointing to files in /path/to/perl/source. The original files are left unaffected. After Configure has finished, you can just say make all test and Perl will be built and tested, all in perl/build/directory. [561] =item * For Perl developers, several new make targets for profiling and debugging have been added; see L<perlhack>. =over 8 =item * Use of the F<gprof> tool to profile Perl has been documented in L<perlhack>. There is a make target called "perl.gprof" for generating a gprofiled Perl executable. =item * If you have GCC 3, there is a make target called "perl.gcov" for creating a gcoved Perl executable for coverage analysis. See L<perlhack>. =item * If you are on IRIX or Tru64 platforms, new profiling/debugging options have been added; see L<perlhack> for more information about pixie and Third Degree. =back =item * Guidelines of how to construct minimal Perl installations have been added to INSTALL. =item * The Thread extension is now not built at all under ithreads (C<Configure -Duseithreads>) because it wouldn't work anyway (the Thread extension requires being Configured with C<-Duse5005threads>). B<Note that the 5.005 threads are unsupported and deprecated: if you have code written for the old threads you should migrate it to the new ithreads model.> =item * The Gconvert macro ($Config{d_Gconvert}) used by perl for stringifying floating-point numbers is now more picky about using sprintf %.*g rules for the conversion. Some platforms that used to use gcvt may now resort to the slower sprintf. =item * The obsolete method of making a special (e.g., debugging) flavor of perl by saying make LIBPERL=libperld.a has been removed. Use -DDEBUGGING instead. =back =head2 New Or Improved Platforms For the list of platforms known to support Perl, see L<perlport/"Supported Platforms">. =over 4 =item * AIX dynamic loading should be now better supported. =item * AIX should now work better with gcc, threads, and 64-bitness. Also the long doubles support in AIX should be better now. See L<perlaix>. =item * AtheOS ( http://www.atheos.cx/ ) is a new platform. =item * BeOS has been reclaimed. =item * The DG/UX platform now supports 5.005-style threads. See L<perldgux>. =item * The DYNIX/ptx platform (also known as dynixptx) is supported at or near osvers 4.5.2. =item * EBCDIC platforms (z/OS (also known as OS/390), POSIX-BC, and VM/ESA) have been regained. Many test suite tests still fail and the co-existence of Unicode and EBCDIC isn't quite settled, but the situation is much better than with Perl 5.6. See L<perlos390>, L<perlbs2000> (for POSIX-BC), and perlvmesa for more information. (B<Note:> support for VM/ESA was removed in Perl v5.18.0. The relevant information was in F<README.vmesa>) =item * Building perl with -Duseithreads or -Duse5005threads now works under HP-UX 10.20 (previously it only worked under 10.30 or later). You will need a thread library package installed. See README.hpux. [561] =item * Mac OS Classic is now supported in the mainstream source package (MacPerl has of course been available since perl 5.004 but now the source code bases of standard Perl and MacPerl have been synchronised) [561] =item * Mac OS X (or Darwin) should now be able to build Perl even on HFS+ filesystems. (The case-insensitivity used to confuse the Perl build process.) =item * NCR MP-RAS is now supported. [561] =item * All the NetBSD specific patches (except for the installation specific ones) have been merged back to the main distribution. =item * NetWare from Novell is now supported. See L<perlnetware>. =item * NonStop-UX is now supported. [561] =item * NEC SUPER-UX is now supported. =item * All the OpenBSD specific patches (except for the installation specific ones) have been merged back to the main distribution. =item * Perl has been tested with the GNU pth userlevel thread package ( http://www.gnu.org/software/pth/pth.html ). All thread tests of Perl now work, but not without adding some yield()s to the tests, so while pth (and other userlevel thread implementations) can be considered to be "working" with Perl ithreads, keep in mind the possible non-preemptability of the underlying thread implementation. =item * Stratus VOS is now supported using Perl's native build method (Configure). This is the recommended method to build Perl on VOS. The older methods, which build miniperl, are still available. See L<perlvos>. [561+] =item * The Amdahl UTS Unix mainframe platform is now supported. [561] =item * WinCE is now supported. See L<perlce>. =item * z/OS (formerly known as OS/390, formerly known as MVS OE) now has support for dynamic loading. This is not selected by default, however, you must specify -Dusedl in the arguments of Configure. [561] =back =head1 Selected Bug Fixes Numerous memory leaks and uninitialized memory accesses have been hunted down. Most importantly, anonymous subs used to leak quite a bit. [561] =over 4 =item * The autouse pragma didn't work for Multi::Part::Function::Names. =item * caller() could cause core dumps in certain situations. Carp was sometimes affected by this problem. In particular, caller() now returns a subroutine name of C<(unknown)> for subroutines that have been removed from the symbol table. =item * chop(@list) in list context returned the characters chopped in reverse order. This has been reversed to be in the right order. [561] =item * Configure no longer includes the DBM libraries (dbm, gdbm, db, ndbm) when building the Perl binary. The only exception to this is SunOS 4.x, which needs them. [561] =item * The behaviour of non-decimal but numeric string constants such as "0x23" was platform-dependent: in some platforms that was seen as 35, in some as 0, in some as a floating point number (don't ask). This was caused by Perl's using the operating system libraries in a situation where the result of the string to number conversion is undefined: now Perl consistently handles such strings as zero in numeric contexts. =item * Several debugger fixes: exit code now reflects the script exit code, condition C<"0"> now treated correctly, the C<d> command now checks line number, C<$.> no longer gets corrupted, and all debugger output now goes correctly to the socket if RemotePort is set. [561] =item * The debugger (perl5db.pl) has been modified to present a more consistent commands interface, via (CommandSet=580). perl5db.t was also added to test the changes, and as a placeholder for further tests. See L<perldebug>. =item * The debugger has a new C<dumpDepth> option to control the maximum depth to which nested structures are dumped. The C<x> command has been extended so that C<x N EXPR> dumps out the value of I<EXPR> to a depth of at most I<N> levels. =item * The debugger can now show lexical variables if you have the CPAN module PadWalker installed. =item * The order of DESTROYs has been made more predictable. =item * Perl 5.6.0 could emit spurious warnings about redefinition of dl_error() when statically building extensions into perl. This has been corrected. [561] =item * L<dprofpp> -R didn't work. =item * C<*foo{FORMAT}> now works. =item * Infinity is now recognized as a number. =item * UNIVERSAL::isa no longer caches methods incorrectly. (This broke the Tk extension with 5.6.0.) [561] =item * Lexicals I: lexicals outside an eval "" weren't resolved correctly inside a subroutine definition inside the eval "" if they were not already referenced in the top level of the eval""ed code. =item * Lexicals II: lexicals leaked at file scope into subroutines that were declared before the lexicals. =item * Lexical warnings now propagating correctly between scopes and into C<eval "...">. =item * C<use warnings qw(FATAL all)> did not work as intended. This has been corrected. [561] =item * warnings::enabled() now reports the state of $^W correctly if the caller isn't using lexical warnings. [561] =item * Line renumbering with eval and C<#line> now works. [561] =item * Fixed numerous memory leaks, especially in eval "". =item * Localised tied variables no longer leak memory use Tie::Hash; tie my %tied_hash => 'Tie::StdHash'; ... # Used to leak memory every time local() was called; # in a loop, this added up. local($tied_hash{Foo}) = 1; =item * Localised hash elements (and %ENV) are correctly unlocalised to not exist, if they didn't before they were localised. use Tie::Hash; tie my %tied_hash => 'Tie::StdHash'; ... # Nothing has set the FOO element so far { local $tied_hash{FOO} = 'Bar' } # This used to print, but not now. print "exists!\n" if exists $tied_hash{FOO}; As a side effect of this fix, tied hash interfaces B<must> define the EXISTS and DELETE methods. =item * mkdir() now ignores trailing slashes in the directory name, as mandated by POSIX. =item * Some versions of glibc have a broken modfl(). This affects builds with C<-Duselongdouble>. This version of Perl detects this brokenness and has a workaround for it. The glibc release 2.2.2 is known to have fixed the modfl() bug. =item * Modulus of unsigned numbers now works (4063328477 % 65535 used to return 27406, instead of 27047). [561] =item * Some "not a number" warnings introduced in 5.6.0 eliminated to be more compatible with 5.005. Infinity is now recognised as a number. [561] =item * Numeric conversions did not recognize changes in the string value properly in certain circumstances. [561] =item * Attributes (such as :shared) didn't work with our(). =item * our() variables will not cause bogus "Variable will not stay shared" warnings. [561] =item * "our" variables of the same name declared in two sibling blocks resulted in bogus warnings about "redeclaration" of the variables. The problem has been corrected. [561] =item * pack "Z" now correctly terminates the string with "\0". =item * Fix password routines which in some shadow password platforms (e.g. HP-UX) caused getpwent() to return every other entry. =item * The PERL5OPT environment variable (for passing command line arguments to Perl) didn't work for more than a single group of options. [561] =item * PERL5OPT with embedded spaces didn't work. =item * printf() no longer resets the numeric locale to "C". =item * C<qw(a\\b)> now parses correctly as C<'a\\b'>: that is, as three characters, not four. [561] =item * pos() did not return the correct value within s///ge in earlier versions. This is now handled correctly. [561] =item * Printing quads (64-bit integers) with printf/sprintf now works without the q L ll prefixes (assuming you are on a quad-capable platform). =item * Regular expressions on references and overloaded scalars now work. [561+] =item * Right-hand side magic (GMAGIC) could in many cases such as string concatenation be invoked too many times. =item * scalar() now forces scalar context even when used in void context. =item * SOCKS support is now much more robust. =item * sort() arguments are now compiled in the right wantarray context (they were accidentally using the context of the sort() itself). The comparison block is now run in scalar context, and the arguments to be sorted are always provided list context. [561] =item * Changed the POSIX character class C<[[:space:]]> to include the (very rarely used) vertical tab character. Added a new POSIX-ish character class C<[[:blank:]]> which stands for horizontal whitespace (currently, the space and the tab). =item * The tainting behaviour of sprintf() has been rationalized. It does not taint the result of floating point formats anymore, making the behaviour consistent with that of string interpolation. [561] =item * Some cases of inconsistent taint propagation (such as within hash values) have been fixed. =item * The RE engine found in Perl 5.6.0 accidentally pessimised certain kinds of simple pattern matches. These are now handled better. [561] =item * Regular expression debug output (whether through C<use re 'debug'> or via C<-Dr>) now looks better. [561] =item * Multi-line matches like C<"a\nxb\n" =~ /(?!\A)x/m> were flawed. The bug has been fixed. [561] =item * Use of $& could trigger a core dump under some situations. This is now avoided. [561] =item * The regular expression captured submatches ($1, $2, ...) are now more consistently unset if the match fails, instead of leaving false data lying around in them. [561] =item * readline() on files opened in "slurp" mode could return an extra "" (blank line) at the end in certain situations. This has been corrected. [561] =item * Autovivification of symbolic references of special variables described in L<perlvar> (as in C<${$num}>) was accidentally disabled. This works again now. [561] =item * Sys::Syslog ignored the C<LOG_AUTH> constant. =item * $AUTOLOAD, sort(), lock(), and spawning subprocesses in multiple threads simultaneously are now thread-safe. =item * Tie::Array's SPLICE method was broken. =item * Allow a read-only string on the left-hand side of a non-modifying tr///. =item * If C<STDERR> is tied, warnings caused by C<warn> and C<die> now correctly pass to it. =item * Several Unicode fixes. =over 8 =item * BOMs (byte order marks) at the beginning of Perl files (scripts, modules) should now be transparently skipped. UTF-16 and UCS-2 encoded Perl files should now be read correctly. =item * The character tables have been updated to Unicode 3.2.0. =item * Comparing with utf8 data does not magically upgrade non-utf8 data into utf8. (This was a problem for example if you were mixing data from I/O and Unicode data: your output might have got magically encoded as UTF-8.) =item * Generating illegal Unicode code points such as U+FFFE, or the UTF-16 surrogates, now also generates an optional warning. =item * C<IsAlnum>, C<IsAlpha>, and C<IsWord> now match titlecase. =item * Concatenation with the C<.> operator or via variable interpolation, C<eq>, C<substr>, C<reverse>, C<quotemeta>, the C<x> operator, substitution with C<s///>, single-quoted UTF-8, should now work. =item * The C<tr///> operator now works. Note that the C<tr///CU> functionality has been removed (but see pack('U0', ...)). =item * C<eval "v200"> now works. =item * Perl 5.6.0 parsed m/\x{ab}/ incorrectly, leading to spurious warnings. This has been corrected. [561] =item * Zero entries were missing from the Unicode classes such as C<IsDigit>. =back =item * Large unsigned numbers (those above 2**31) could sometimes lose their unsignedness, causing bogus results in arithmetic operations. [561] =item * The Perl parser has been stress tested using both random input and Markov chain input and the few found crashes and lockups have been fixed. =back =head2 Platform Specific Changes and Fixes =over 4 =item * BSDI 4.* Perl now works on post-4.0 BSD/OSes. =item * All BSDs Setting C<$0> now works (as much as possible; see L<perlvar> for details). =item * Cygwin Numerous updates; currently synchronised with Cygwin 1.3.10. =item * Previously DYNIX/ptx had problems in its Configure probe for non-blocking I/O. =item * EPOC EPOC now better supported. See README.epoc. [561] =item * FreeBSD 3.* Perl now works on post-3.0 FreeBSDs. =item * HP-UX README.hpux updated; C<Configure -Duse64bitall> now works; now uses HP-UX malloc instead of Perl malloc. =item * IRIX Numerous compilation flag and hint enhancements; accidental mixing of 32-bit and 64-bit libraries (a doomed attempt) made much harder. =item * Linux =over 8 =item * Long doubles should now work (see INSTALL). [561] =item * Linux previously had problems related to sockaddrlen when using accept(), recvfrom() (in Perl: recv()), getpeername(), and getsockname(). =back =item * Mac OS Classic Compilation of the standard Perl distribution in Mac OS Classic should now work if you have the Metrowerks development environment and the missing Mac-specific toolkit bits. Contact the macperl mailing list for details. =item * MPE/iX MPE/iX update after Perl 5.6.0. See README.mpeix. [561] =item * NetBSD/threads: try installing the GNU pth (should be in the packages collection, or http://www.gnu.org/software/pth/), and Configure with -Duseithreads. =item * NetBSD/sparc Perl now works on NetBSD/sparc. =item * OS/2 Now works with usethreads (see INSTALL). [561] =item * Solaris 64-bitness using the Sun Workshop compiler now works. =item * Stratus VOS The native build method requires at least VOS Release 14.5.0 and GNU C++/GNU Tools 2.0.1 or later. The Perl pack function now maps overflowed values to +infinity and underflowed values to -infinity. =item * Tru64 (aka Digital UNIX, aka DEC OSF/1) The operating system version letter now recorded in $Config{osvers}. Allow compiling with gcc (previously explicitly forbidden). Compiling with gcc still not recommended because buggy code results, even with gcc 2.95.2. =item * Unicos Fixed various alignment problems that lead into core dumps either during build or later; no longer dies on math errors at runtime; now using full quad integers (64 bits), previously was using only 46 bit integers for speed. =item * VMS See L</"Socket Extension Dynamic in VMS"> and L</"IEEE-format Floating Point Default on OpenVMS Alpha"> for important changes not otherwise listed here. chdir() now works better despite a CRT bug; now works with MULTIPLICITY (see INSTALL); now works with Perl's malloc. The tainting of C<%ENV> elements via C<keys> or C<values> was previously unimplemented. It now works as documented. The C<waitpid> emulation has been improved. The worst bug (now fixed) was that a pid of -1 would cause a wildcard search of all processes on the system. POSIX-style signals are now emulated much better on VMS versions prior to 7.0. The C<system> function and backticks operator have improved functionality and better error handling. [561] File access tests now use current process privileges rather than the user's default privileges, which could sometimes result in a mismatch between reported access and actual access. This improvement is only available on VMS v6.0 and later. There is a new C<kill> implementation based on C<sys$sigprc> that allows older VMS systems (pre-7.0) to use C<kill> to send signals rather than simply force exit. This implementation also allows later systems to call C<kill> from within a signal handler. Iterative logical name translations are now limited to 10 iterations in imitation of SHOW LOGICAL and other OpenVMS facilities. =item * Windows =over 8 =item * Signal handling now works better than it used to. It is now implemented using a Windows message loop, and is therefore less prone to random crashes. =item * fork() emulation is now more robust, but still continues to have a few esoteric bugs and caveats. See L<perlfork> for details. [561+] =item * A failed (pseudo)fork now returns undef and sets errno to EAGAIN. [561] =item * The following modules now work on Windows: ExtUtils::Embed [561] IO::Pipe IO::Poll Net::Ping =item * IO::File::new_tmpfile() is no longer limited to 32767 invocations per-process. =item * Better chdir() return value for a non-existent directory. =item * Compiling perl using the 64-bit Platform SDK tools is now supported. =item * The Win32::SetChildShowWindow() builtin can be used to control the visibility of windows created by child processes. See L<Win32> for details. =item * Non-blocking waits for child processes (or pseudo-processes) are supported via C<waitpid($pid, &POSIX::WNOHANG)>. =item * The behavior of system() with multiple arguments has been rationalized. Each unquoted argument will be automatically quoted to protect whitespace, and any existing whitespace in the arguments will be preserved. This improves the portability of system(@args) by avoiding the need for Windows C<cmd> shell specific quoting in perl programs. Note that this means that some scripts that may have relied on earlier buggy behavior may no longer work correctly. For example, C<system("nmake /nologo", @args)> will now attempt to run the file C<nmake /nologo> and will fail when such a file isn't found. On the other hand, perl will now execute code such as C<system("c:/Program Files/MyApp/foo.exe", @args)> correctly. =item * The perl header files no longer suppress common warnings from the Microsoft Visual C++ compiler. This means that additional warnings may now show up when compiling XS code. =item * Borland C++ v5.5 is now a supported compiler that can build Perl. However, the generated binaries continue to be incompatible with those generated by the other supported compilers (GCC and Visual C++). [561] =item * Duping socket handles with open(F, ">&MYSOCK") now works under Windows 9x. [561] =item * Current directory entries in %ENV are now correctly propagated to child processes. [561] =item * New %ENV entries now propagate to subprocesses. [561] =item * Win32::GetCwd() correctly returns C:\ instead of C: when at the drive root. Other bugs in chdir() and Cwd::cwd() have also been fixed. [561] =item * The makefiles now default to the features enabled in ActiveState ActivePerl (a popular Win32 binary distribution). [561] =item * HTML files will now be installed in c:\perl\html instead of c:\perl\lib\pod\html =item * REG_EXPAND_SZ keys are now allowed in registry settings used by perl. [561] =item * Can now send() from all threads, not just the first one. [561] =item * ExtUtils::MakeMaker now uses $ENV{LIB} to search for libraries. [561] =item * Less stack reserved per thread so that more threads can run concurrently. (Still 16M per thread.) [561] =item * C<< File::Spec->tmpdir() >> now prefers C:/temp over /tmp (works better when perl is running as service). =item * Better UNC path handling under ithreads. [561] =item * wait(), waitpid(), and backticks now return the correct exit status under Windows 9x. [561] =item * A socket handle leak in accept() has been fixed. [561] =back =back =head1 New or Changed Diagnostics Please see L<perldiag> for more details. =over 4 =item * Ambiguous range in the transliteration operator (like a-z-9) now gives a warning. =item * chdir("") and chdir(undef) now give a deprecation warning because they cause a possible unintentional chdir to the home directory. Say chdir() if you really mean that. =item * Two new debugging options have been added: if you have compiled your Perl with debugging, you can use the -DT [561] and -DR options to trace tokenising and to add reference counts to displaying variables, respectively. =item * The lexical warnings category "deprecated" is no longer a sub-category of the "syntax" category. It is now a top-level category in its own right. =item * Unadorned dump() will now give a warning suggesting to use explicit CORE::dump() if that's what really is meant. =item * The "Unrecognized escape" warning has been extended to include C<\8>, C<\9>, and C<\_>. There is no need to escape any of the C<\w> characters. =item * All regular expression compilation error messages are now hopefully easier to understand both because the error message now comes before the failed regex and because the point of failure is now clearly marked by a C<E<lt>-- HERE> marker. =item * Various I/O (and socket) functions like binmode(), close(), and so forth now more consistently warn if they are used illogically either on a yet unopened or on an already closed filehandle (or socket). =item * Using lstat() on a filehandle now gives a warning. (It's a non-sensical thing to do.) =item * The C<-M> and C<-m> options now warn if you didn't supply the module name. =item * If you in C<use> specify a required minimum version, modules matching the name and but not defining a $VERSION will cause a fatal failure. =item * Using negative offset for vec() in lvalue context is now a warnable offense. =item * Odd number of arguments to overload::constant now elicits a warning. =item * Odd number of elements in anonymous hash now elicits a warning. =item * The various "opened only for", "on closed", "never opened" warnings drop the C<main::> prefix for filehandles in the C<main> package, for example C<STDIN> instead of C<main::STDIN>. =item * Subroutine prototypes are now checked more carefully, you may get warnings for example if you have used non-prototype characters. =item * If an attempt to use a (non-blessed) reference as an array index is made, a warning is given. =item * C<push @a;> and C<unshift @a;> (with no values to push or unshift) now give a warning. This may be a problem for generated and eval'ed code. =item * If you try to L<perlfunc/pack> a number less than 0 or larger than 255 using the C<"C"> format you will get an optional warning. Similarly for the C<"c"> format and a number less than -128 or more than 127. =item * pack C<P> format now demands an explicit size. =item * unpack C<w> now warns of unterminated compressed integers. =item * Warnings relating to the use of PerlIO have been added. =item * Certain regex modifiers such as C<(?o)> make sense only if applied to the entire regex. You will get an optional warning if you try to do otherwise. =item * Variable length lookbehind has not yet been implemented, trying to use it will tell that. =item * Using arrays or hashes as references (e.g. C<< %foo->{bar} >> has been deprecated for a while. Now you will get an optional warning. =item * Warnings relating to the use of the new restricted hashes feature have been added. =item * Self-ties of arrays and hashes are not supported and fatal errors will happen even at an attempt to do so. =item * Using C<sort> in scalar context now issues an optional warning. This didn't do anything useful, as the sort was not performed. =item * Using the /g modifier in split() is meaningless and will cause a warning. =item * Using splice() past the end of an array now causes a warning. =item * Malformed Unicode encodings (UTF-8 and UTF-16) cause a lot of warnings, as does trying to use UTF-16 surrogates (which are unimplemented). =item * Trying to use Unicode characters on an I/O stream without marking the stream's encoding (using open() or binmode()) will cause "Wide character" warnings. =item * Use of v-strings in use/require causes a (backward) portability warning. =item * Warnings relating to the use interpreter threads and their shared data have been added. =back =head1 Changed Internals =over 4 =item * PerlIO is now the default. =item * perlapi.pod (a companion to perlguts) now attempts to document the internal API. =item * You can now build a really minimal perl called microperl. Building microperl does not require even running Configure; C<make -f Makefile.micro> should be enough. Beware: microperl makes many assumptions, some of which may be too bold; the resulting executable may crash or otherwise misbehave in wondrous ways. For careful hackers only. =item * Added rsignal(), whichsig(), do_join(), op_clear, op_null, ptr_table_clear(), ptr_table_free(), sv_setref_uv(), and several UTF-8 interfaces to the publicised API. For the full list of the available APIs see L<perlapi>. =item * Made possible to propagate customised exceptions via croak()ing. =item * Now xsubs can have attributes just like subs. (Well, at least the built-in attributes.) =item * dTHR and djSP have been obsoleted; the former removed (because it's a no-op) and the latter replaced with dSP. =item * PERL_OBJECT has been completely removed. =item * The MAGIC constants (e.g. C<'P'>) have been macrofied (e.g. C<PERL_MAGIC_TIED>) for better source code readability and maintainability. =item * The regex compiler now maintains a structure that identifies nodes in the compiled bytecode with the corresponding syntactic features of the original regex expression. The information is attached to the new C<offsets> member of the C<struct regexp>. See L<perldebguts> for more complete information. =item * The C code has been made much more C<gcc -Wall> clean. Some warning messages still remain in some platforms, so if you are compiling with gcc you may see some warnings about dubious practices. The warnings are being worked on. =item * F<perly.c>, F<sv.c>, and F<sv.h> have now been extensively commented. =item * Documentation on how to use the Perl source repository has been added to F<Porting/repository.pod>. =item * There are now several profiling make targets. =back =head1 Security Vulnerability Closed [561] (This change was already made in 5.7.0 but bears repeating here.) (5.7.0 came out before 5.6.1: the development branch 5.7 released earlier than the maintenance branch 5.6) A potential security vulnerability in the optional suidperl component of Perl was identified in August 2000. suidperl is neither built nor installed by default. As of November 2001 the only known vulnerable platform is Linux, most likely all Linux distributions. CERT and various vendors and distributors have been alerted about the vulnerability. See http://www.cpan.org/src/5.0/sperl-2000-08-05/sperl-2000-08-05.txt for more information. The problem was caused by Perl trying to report a suspected security exploit attempt using an external program, /bin/mail. On Linux platforms the /bin/mail program had an undocumented feature which when combined with suidperl gave access to a root shell, resulting in a serious compromise instead of reporting the exploit attempt. If you don't have /bin/mail, or if you have 'safe setuid scripts', or if suidperl is not installed, you are safe. The exploit attempt reporting feature has been completely removed from Perl 5.8.0 (and the maintenance release 5.6.1, and it was removed also from all the Perl 5.7 releases), so that particular vulnerability isn't there anymore. However, further security vulnerabilities are, unfortunately, always possible. The suidperl functionality is most probably going to be removed in Perl 5.10. In any case, suidperl should only be used by security experts who know exactly what they are doing and why they are using suidperl instead of some other solution such as sudo ( see http://www.courtesan.com/sudo/ ). =head1 New Tests Several new tests have been added, especially for the F<lib> and F<ext> subsections. There are now about 69 000 individual tests (spread over about 700 test scripts), in the regression suite (5.6.1 has about 11 700 tests, in 258 test scripts) The exact numbers depend on the platform and Perl configuration used. Many of the new tests are of course introduced by the new modules, but still in general Perl is now more thoroughly tested. Because of the large number of tests, running the regression suite will take considerably longer time than it used to: expect the suite to take up to 4-5 times longer to run than in perl 5.6. On a really fast machine you can hope to finish the suite in about 6-8 minutes (wallclock time). The tests are now reported in a different order than in earlier Perls. (This happens because the test scripts from under t/lib have been moved to be closer to the library/extension they are testing.) =head1 Known Problems =head2 The Compiler Suite Is Still Very Experimental The compiler suite is slowly getting better but it continues to be highly experimental. Use in production environments is discouraged. =head2 Localising Tied Arrays and Hashes Is Broken local %tied_array; doesn't work as one would expect: the old value is restored incorrectly. This will be changed in a future release, but we don't know yet what the new semantics will exactly be. In any case, the change will break existing code that relies on the current (ill-defined) semantics, so just avoid doing this in general. =head2 Building Extensions Can Fail Because Of Largefiles Some extensions like mod_perl are known to have issues with `largefiles', a change brought by Perl 5.6.0 in which file offsets default to 64 bits wide, where supported. Modules may fail to compile at all, or they may compile and work incorrectly. Currently, there is no good solution for the problem, but Configure now provides appropriate non-largefile ccflags, ldflags, libswanted, and libs in the %Config hash (e.g., $Config{ccflags_nolargefiles}) so the extensions that are having problems can try configuring themselves without the largefileness. This is admittedly not a clean solution, and the solution may not even work at all. One potential failure is whether one can (or, if one can, whether it's a good idea to) link together at all binaries with different ideas about file offsets; all this is platform-dependent. =head2 Modifying $_ Inside for(..) for (1..5) { $_++ } works without complaint. It shouldn't. (You should be able to modify only lvalue elements inside the loops.) You can see the correct behaviour by replacing the 1..5 with 1, 2, 3, 4, 5. =head2 mod_perl 1.26 Doesn't Build With Threaded Perl Use mod_perl 1.27 or higher. =head2 lib/ftmp-security tests warn 'system possibly insecure' Don't panic. Read the 'make test' section of INSTALL instead. =head2 libwww-perl (LWP) fails base/date #51 Use libwww-perl 5.65 or later. =head2 PDL failing some tests Use PDL 2.3.4 or later. =head2 Perl_get_sv You may get errors like 'Undefined symbol "Perl_get_sv"' or "can't resolve symbol 'Perl_get_sv'", or the symbol may be "Perl_sv_2pv". This probably means that you are trying to use an older shared Perl library (or extensions linked with such) with Perl 5.8.0 executable. Perl used to have such a subroutine, but that is no more the case. Check your shared library path, and any shared Perl libraries in those directories. Sometimes this problem may also indicate a partial Perl 5.8.0 installation, see L</"Mac OS X dyld undefined symbols"> for an example and how to deal with it. =head2 Self-tying Problems Self-tying of arrays and hashes is broken in rather deep and hard-to-fix ways. As a stop-gap measure to avoid people from getting frustrated at the mysterious results (core dumps, most often), it is forbidden for now (you will get a fatal error even from an attempt). A change to self-tying of globs has caused them to be recursively referenced (see: L<perlobj/"Two-Phased Garbage Collection">). You will now need an explicit untie to destroy a self-tied glob. This behaviour may be fixed at a later date. Self-tying of scalars and IO thingies works. =head2 ext/threads/t/libc If this test fails, it indicates that your libc (C library) is not threadsafe. This particular test stress tests the localtime() call to find out whether it is threadsafe. See L<perlthrtut> for more information. =head2 Failure of Thread (5.005-style) tests B<Note that support for 5.005-style threading is deprecated, experimental and practically unsupported. In 5.10, it is expected to be removed. You should migrate your code to ithreads.> The following tests are known to fail due to fundamental problems in the 5.005 threading implementation. These are not new failures--Perl 5.005_0x has the same bugs, but didn't have these tests. ../ext/B/t/xref.t 255 65280 14 12 85.71% 3-14 ../ext/List/Util/t/first.t 255 65280 7 4 57.14% 2 5-7 ../lib/English.t 2 512 54 2 3.70% 2-3 ../lib/FileCache.t 5 1 20.00% 5 ../lib/Filter/Simple/t/data.t 6 3 50.00% 1-3 ../lib/Filter/Simple/t/filter_only. 9 3 33.33% 1-2 5 ../lib/Math/BigInt/t/bare_mbf.t 1627 4 0.25% 8 11 1626-1627 ../lib/Math/BigInt/t/bigfltpm.t 1629 4 0.25% 10 13 1628- 1629 ../lib/Math/BigInt/t/sub_mbf.t 1633 4 0.24% 8 11 1632-1633 ../lib/Math/BigInt/t/with_sub.t 1628 4 0.25% 9 12 1627-1628 ../lib/Tie/File/t/31_autodefer.t 255 65280 65 32 49.23% 34-65 ../lib/autouse.t 10 1 10.00% 4 op/flip.t 15 1 6.67% 15 These failures are unlikely to get fixed as 5.005-style threads are considered fundamentally broken. (Basically what happens is that competing threads can corrupt shared global state, one good example being regular expression engine's state.) =head2 Timing problems The following tests may fail intermittently because of timing problems, for example if the system is heavily loaded. t/op/alarm.t ext/Time/HiRes/HiRes.t lib/Benchmark.t lib/Memoize/t/expmod_t.t lib/Memoize/t/speed.t In case of failure please try running them manually, for example ./perl -Ilib ext/Time/HiRes/HiRes.t =head2 Tied/Magical Array/Hash Elements Do Not Autovivify For normal arrays C<$foo = \$bar[1]> will assign C<undef> to C<$bar[1]> (assuming that it didn't exist before), but for tied/magical arrays and hashes such autovivification does not happen because there is currently no way to catch the reference creation. The same problem affects slicing over non-existent indices/keys of a tied/magical array/hash. =head2 Unicode in package/class and subroutine names does not work One can have Unicode in identifier names, but not in package/class or subroutine names. While some limited functionality towards this does exist as of Perl 5.8.0, that is more accidental than designed; use of Unicode for the said purposes is unsupported. One reason of this unfinishedness is its (currently) inherent unportability: since both package names and subroutine names may need to be mapped to file and directory names, the Unicode capability of the filesystem becomes important-- and there unfortunately aren't portable answers. =head1 Platform Specific Problems =head2 AIX =over 4 =item * If using the AIX native make command, instead of just "make" issue "make all". In some setups the former has been known to spuriously also try to run "make install". Alternatively, you may want to use GNU make. =item * In AIX 4.2, Perl extensions that use C++ functions that use statics may have problems in that the statics are not getting initialized. In newer AIX releases, this has been solved by linking Perl with the libC_r library, but unfortunately in AIX 4.2 the said library has an obscure bug where the various functions related to time (such as time() and gettimeofday()) return broken values, and therefore in AIX 4.2 Perl is not linked against libC_r. =item * vac 5.0.0.0 May Produce Buggy Code For Perl The AIX C compiler vac version 5.0.0.0 may produce buggy code, resulting in a few random tests failing when run as part of "make test", but when the failing tests are run by hand, they succeed. We suggest upgrading to at least vac version 5.0.1.0, that has been known to compile Perl correctly. "lslpp -L|grep vac.C" will tell you the vac version. See README.aix. =item * If building threaded Perl, you may get compilation warning from pp_sys.c: "pp_sys.c", line 4651.39: 1506-280 (W) Function argument assignment between types "unsigned char*" and "const void*" is not allowed. This is harmless; it is caused by the getnetbyaddr() and getnetbyaddr_r() having slightly different types for their first argument. =back =head2 Alpha systems with old gccs fail several tests If you see op/pack, op/pat, op/regexp, or ext/Storable tests failing in a Linux/alpha or *BSD/Alpha, it's probably time to upgrade your gcc. gccs prior to 2.95.3 are definitely not good enough, and gcc 3.1 may be even better. (RedHat Linux/alpha with gcc 3.1 reported no problems, as did Linux 2.4.18 with gcc 2.95.4.) (In Tru64, it is preferable to use the bundled C compiler.) =head2 AmigaOS Perl 5.8.0 doesn't build in AmigaOS. It broke at some point during the ithreads work and we could not find Amiga experts to unbreak the problems. Perl 5.6.1 still works for AmigaOS (as does the 5.7.2 development release). =head2 BeOS The following tests fail on 5.8.0 Perl in BeOS Personal 5.03: t/op/lfs............................FAILED at test 17 t/op/magic..........................FAILED at test 24 ext/Fcntl/t/syslfs..................FAILED at test 17 ext/File/Glob/t/basic...............FAILED at test 3 ext/POSIX/t/sigaction...............FAILED at test 13 ext/POSIX/t/waitpid.................FAILED at test 1 (B<Note:> more information was available in F<README.beos> until support for BeOS was removed in Perl v5.18.0) =head2 Cygwin "unable to remap" For example when building the Tk extension for Cygwin, you may get an error message saying "unable to remap". This is known problem with Cygwin, and a workaround is detailed in here: http://sources.redhat.com/ml/cygwin/2001-12/msg00894.html =head2 Cygwin ndbm tests fail on FAT One can build but not install (or test the build of) the NDBM_File on FAT filesystems. Installation (or build) on NTFS works fine. If one attempts the test on a FAT install (or build) the following failures are expected: ../ext/NDBM_File/ndbm.t 13 3328 71 59 83.10% 1-2 4 16-71 ../ext/ODBM_File/odbm.t 255 65280 ?? ?? % ?? ../lib/AnyDBM_File.t 2 512 12 2 16.67% 1 4 ../lib/Memoize/t/errors.t 0 139 11 5 45.45% 7-11 ../lib/Memoize/t/tie_ndbm.t 13 3328 4 4 100.00% 1-4 run/fresh_perl.t 97 1 1.03% 91 NDBM_File fails and ODBM_File just coredumps. If you intend to run only on FAT (or if using AnyDBM_File on FAT), run Configure with the -Ui_ndbm and -Ui_dbm options to prevent NDBM_File and ODBM_File being built. =head2 DJGPP Failures t/op/stat............................FAILED at test 29 lib/File/Find/t/find.................FAILED at test 1 lib/File/Find/t/taint................FAILED at test 1 lib/h2xs.............................FAILED at test 15 lib/Pod/t/eol........................FAILED at test 1 lib/Test/Harness/t/strap-analyze.....FAILED at test 8 lib/Test/Harness/t/test-harness......FAILED at test 23 lib/Test/Simple/t/exit...............FAILED at test 1 The above failures are known as of 5.8.0 with native builds with long filenames, but there are a few more if running under dosemu because of limitations (and maybe bugs) of dosemu: t/comp/cpp...........................FAILED at test 3 t/op/inccode.........................(crash) and a few lib/ExtUtils tests, and several hundred Encode/t/Aliases.t failures that work fine with long filenames. So you really might prefer native builds and long filenames. =head2 FreeBSD built with ithreads coredumps reading large directories This is a known bug in FreeBSD 4.5's readdir_r(), it has been fixed in FreeBSD 4.6 (see L<perlfreebsd> (README.freebsd)). =head2 FreeBSD Failing locale Test 117 For ISO 8859-15 Locales The ISO 8859-15 locales may fail the locale test 117 in FreeBSD. This is caused by the characters \xFF (y with diaeresis) and \xBE (Y with diaeresis) not behaving correctly when being matched case-insensitively. Apparently this problem has been fixed in the latest FreeBSD releases. ( http://www.freebsd.org/cgi/query-pr.cgi?pr=34308 ) =head2 IRIX fails ext/List/Util/t/shuffle.t or Digest::MD5 IRIX with MIPSpro 7.3.1.2m or 7.3.1.3m compiler may fail the List::Util test ext/List/Util/t/shuffle.t by dumping core. This seems to be a compiler error since if compiled with gcc no core dump ensues, and no failures have been seen on the said test on any other platform. Similarly, building the Digest::MD5 extension has been known to fail with "*** Termination code 139 (bu21)". The cure is to drop optimization level (Configure -Doptimize=-O2). =head2 HP-UX lib/posix Subtest 9 Fails When LP64-Configured If perl is configured with -Duse64bitall, the successful result of the subtest 10 of lib/posix may arrive before the successful result of the subtest 9, which confuses the test harness so much that it thinks the subtest 9 failed. =head2 Linux with glibc 2.2.5 fails t/op/int subtest #6 with -Duse64bitint This is a known bug in the glibc 2.2.5 with long long integers. ( http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=65612 ) =head2 Linux With Sfio Fails op/misc Test 48 No known fix. =head2 Mac OS X Please remember to set your environment variable LC_ALL to "C" (setenv LC_ALL C) before running "make test" to avoid a lot of warnings about the broken locales of Mac OS X. The following tests are known to fail in Mac OS X 10.1.5 because of buggy (old) implementations of Berkeley DB included in Mac OS X: Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------- ../ext/DB_File/t/db-btree.t 0 11 ?? ?? % ?? ../ext/DB_File/t/db-recno.t 149 3 2.01% 61 63 65 If you are building on a UFS partition, you will also probably see t/op/stat.t subtest #9 fail. This is caused by Darwin's UFS not supporting inode change time. Also the ext/POSIX/t/posix.t subtest #10 fails but it is skipped for now because the failure is Apple's fault, not Perl's (blocked signals are lost). If you Configure with ithreads, ext/threads/t/libc.t will fail. Again, this is not Perl's fault-- the libc of Mac OS X is not threadsafe (in this particular test, the localtime() call is found to be threadunsafe.) =head2 Mac OS X dyld undefined symbols If after installing Perl 5.8.0 you are getting warnings about missing symbols, for example dyld: perl Undefined symbols _perl_sv_2pv _perl_get_sv you probably have an old pre-Perl-5.8.0 installation (or parts of one) in /Library/Perl (the undefined symbols used to exist in pre-5.8.0 Perls). It seems that for some reason "make install" doesn't always completely overwrite the files in /Library/Perl. You can move the old Perl shared library out of the way like this: cd /Library/Perl/darwin/CORE mv libperl.dylib libperlold.dylib and then reissue "make install". Note that the above of course is extremely disruptive for anything using the /usr/local/bin/perl. If that doesn't help, you may have to try removing all the .bundle files from beneath /Library/Perl, and again "make install"-ing. =head2 OS/2 Test Failures The following tests are known to fail on OS/2 (for clarity only the failures are shown, not the full error messages): ../lib/ExtUtils/t/Mkbootstrap.t 1 256 18 1 5.56% 8 ../lib/ExtUtils/t/Packlist.t 1 256 34 1 2.94% 17 ../lib/ExtUtils/t/basic.t 1 256 17 1 5.88% 14 lib/os2_process.t 2 512 227 2 0.88% 174 209 lib/os2_process_kid.t 227 2 0.88% 174 209 lib/rx_cmprt.t 255 65280 18 3 16.67% 16-18 =head2 op/sprintf tests 91, 129, and 130 The op/sprintf tests 91, 129, and 130 are known to fail on some platforms. Examples include any platform using sfio, and Compaq/Tandem's NonStop-UX. Test 91 is known to fail on QNX6 (nto), because C<sprintf '%e',0> incorrectly produces C<0.000000e+0> instead of C<0.000000e+00>. For tests 129 and 130, the failing platforms do not comply with the ANSI C Standard: lines 19ff on page 134 of ANSI X3.159 1989, to be exact. (They produce something other than "1" and "-1" when formatting 0.6 and -0.6 using the printf format "%.0f"; most often, they produce "0" and "-0".) =head2 SCO The socketpair tests are known to be unhappy in SCO 3.2v5.0.4: ext/Socket/socketpair.t...............FAILED tests 15-45 =head2 Solaris 2.5 In case you are still using Solaris 2.5 (aka SunOS 5.5), you may experience failures (the test core dumping) in lib/locale.t. The suggested cure is to upgrade your Solaris. =head2 Solaris x86 Fails Tests With -Duse64bitint The following tests are known to fail in Solaris x86 with Perl configured to use 64 bit integers: ext/Data/Dumper/t/dumper.............FAILED at test 268 ext/Devel/Peek/Peek..................FAILED at test 7 =head2 SUPER-UX (NEC SX) The following tests are known to fail on SUPER-UX: op/64bitint...........................FAILED tests 29-30, 32-33, 35-36 op/arith..............................FAILED tests 128-130 op/pack...............................FAILED tests 25-5625 op/pow................................ op/taint..............................# msgsnd failed ../ext/IO/lib/IO/t/io_poll............FAILED tests 3-4 ../ext/IPC/SysV/ipcsysv...............FAILED tests 2, 5-6 ../ext/IPC/SysV/t/msg.................FAILED tests 2, 4-6 ../ext/Socket/socketpair..............FAILED tests 12 ../lib/IPC/SysV.......................FAILED tests 2, 5-6 ../lib/warnings.......................FAILED tests 115-116, 118-119 The op/pack failure ("Cannot compress negative numbers at op/pack.t line 126") is serious but as of yet unsolved. It points at some problems with the signedness handling of the C compiler, as do the 64bitint, arith, and pow failures. Most of the rest point at problems with SysV IPC. =head2 Term::ReadKey not working on Win32 Use Term::ReadKey 2.20 or later. =head2 UNICOS/mk =over 4 =item * During Configure, the test Guessing which symbols your C compiler and preprocessor define... will probably fail with error messages like CC-20 cc: ERROR File = try.c, Line = 3 The identifier "bad" is undefined. bad switch yylook 79bad switch yylook 79bad switch yylook 79bad switch yylook 79#ifdef A29K ^ CC-65 cc: ERROR File = try.c, Line = 3 A semicolon is expected at this point. This is caused by a bug in the awk utility of UNICOS/mk. You can ignore the error, but it does cause a slight problem: you cannot fully benefit from the h2ph utility (see L<h2ph>) that can be used to convert C headers to Perl libraries, mainly used to be able to access from Perl the constants defined using C preprocessor, cpp. Because of the above error, parts of the converted headers will be invisible. Luckily, these days the need for h2ph is rare. =item * If building Perl with interpreter threads (ithreads), the getgrent(), getgrnam(), and getgrgid() functions cannot return the list of the group members due to a bug in the multithreaded support of UNICOS/mk. What this means is that in list context the functions will return only three values, not four. =back =head2 UTS There are a few known test failures. (B<Note:> the relevant information was available in F<README.uts> until support for UTS was removed in Perl v5.18.0) =head2 VOS (Stratus) When Perl is built using the native build process on VOS Release 14.5.0 and GNU C++/GNU Tools 2.0.1, all attempted tests either pass or result in TODO (ignored) failures. =head2 VMS There should be no reported test failures with a default configuration, though there are a number of tests marked TODO that point to areas needing further debugging and/or porting work. =head2 Win32 In multi-CPU boxes, there are some problems with the I/O buffering: some output may appear twice. =head2 XML::Parser not working Use XML::Parser 2.31 or later. =head2 z/OS (OS/390) z/OS has rather many test failures but the situation is actually much better than it was in 5.6.0; it's just that so many new modules and tests have been added. Failed Test Stat Wstat Total Fail Failed List of Failed --------------------------------------------------------------------------- ../ext/Data/Dumper/t/dumper.t 357 8 2.24% 311 314 325 327 331 333 337 339 ../ext/IO/lib/IO/t/io_unix.t 5 4 80.00% 2-5 ../ext/Storable/t/downgrade.t 12 3072 169 12 7.10% 14-15 46-47 78-79 110-111 150 161 ../lib/ExtUtils/t/Constant.t 121 30976 48 48 100.00% 1-48 ../lib/ExtUtils/t/Embed.t 9 9 100.00% 1-9 op/pat.t 922 7 0.76% 665 776 785 832- 834 845 op/sprintf.t 224 3 1.34% 98 100 136 op/tr.t 97 5 5.15% 63 71-74 uni/fold.t 780 6 0.77% 61 169 196 661 710-711 The failures in dumper.t and downgrade.t are problems in the tests, those in io_unix and sprintf are problems in the USS (UDP sockets and printf formats). The pat, tr, and fold failures are genuine Perl problems caused by EBCDIC (and in the pat and fold cases, combining that with Unicode). The Constant and Embed are probably problems in the tests (since they test Perl's ability to build extensions, and that seems to be working reasonably well.) =head2 Unicode Support on EBCDIC Still Spotty Though mostly working, Unicode support still has problem spots on EBCDIC platforms. One such known spot are the C<\p{}> and C<\P{}> regular expression constructs for code points less than 256: the C<pP> are testing for Unicode code points, not knowing about EBCDIC. =head2 Seen In Perl 5.7 But Gone Now C<Time::Piece> (previously known as C<Time::Object>) was removed because it was felt that it didn't have enough value in it to be a core module. It is still a useful module, though, and is available from the CPAN. Perl 5.8 unfortunately does not build anymore on AmigaOS; this broke accidentally at some point. Since there are not that many Amiga developers available, we could not get this fixed and tested in time for 5.8.0. Perl 5.6.1 still works for AmigaOS (as does the 5.7.2 development release). The C<PerlIO::Scalar> and C<PerlIO::Via> (capitalised) were renamed as C<PerlIO::scalar> and C<PerlIO::via> (all lowercase) just before 5.8.0. The main rationale was to have all core PerlIO layers to have all lowercase names. The "plugins" are named as usual, for example C<PerlIO::via::QuotedPrint>. The C<threads::shared::queue> and C<threads::shared::semaphore> were renamed as C<Thread::Queue> and C<Thread::Semaphore> just before 5.8.0. The main rationale was to have thread modules to obey normal naming, C<Thread::> (the C<threads> and C<threads::shared> themselves are more pragma-like, they affect compile-time, so they stay lowercase). =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://bugs.perl.org/ . There may also be information at http://www.perl.com/ , the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. =head1 SEE ALSO The F<Changes> file for exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =head1 HISTORY Written by Jarkko Hietaniemi <F<jhi@iki.fi>>. =cut perl5224delta.pod 0000644 00000010554 15125556335 0007560 0 ustar 00 =encoding utf8 =head1 NAME perl5224delta - what is new for perl v5.22.4 =head1 DESCRIPTION This document describes differences between the 5.22.3 release and the 5.22.4 release. If you are upgrading from an earlier release such as 5.22.2, first read L<perl5223delta>, which describes differences between 5.22.2 and 5.22.3. =head1 Security =head2 Improved handling of '.' in @INC in base.pm The handling of (the removal of) C<'.'> in C<@INC> in L<base> has been improved. This resolves some problematic behaviour in the approach taken in Perl 5.22.3, which is probably best described in the following two threads on the Perl 5 Porters mailing list: L<http://www.nntp.perl.org/group/perl.perl5.porters/2016/08/msg238991.html>, L<http://www.nntp.perl.org/group/perl.perl5.porters/2016/10/msg240297.html>. =head2 "Escaped" colons and relative paths in PATH On Unix systems, Perl treats any relative paths in the PATH environment variable as tainted when starting a new process. Previously, it was allowing a backslash to escape a colon (unlike the OS), consequently allowing relative paths to be considered safe if the PATH was set to something like C</\:.>. The check has been fixed to treat C<.> as tainted in that example. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<base> has been upgraded from version 2.22 to 2.22_01. =item * L<Module::CoreList> has been upgraded from version 5.20170114_22 to 5.20170715_22. =back =head1 Selected Bug Fixes =over 4 =item * Fixed a crash with C<s///l> where it thought it was dealing with UTF-8 when it wasn't. L<[perl #129038]|https://rt.perl.org/Ticket/Display.html?id=129038> =back =head1 Acknowledgements Perl 5.22.4 represents approximately 6 months of development since Perl 5.22.3 and contains approximately 2,200 lines of changes across 52 files from 16 authors. Excluding auto-generated files, documentation and release tools, there were approximately 970 lines of changes to 18 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.22.4: Aaron Crane, Abigail, Aristotle Pagaltzis, Chris 'BinGOs' Williams, David Mitchell, Eric Herman, Father Chrysostomos, James E Keenan, Karl Williamson, Lukas Mai, Renee Baecker, Ricardo Signes, Sawyer X, Stevan Little, Steve Hay, Tony Cook. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at https://rt.perl.org/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl5222delta.pod 0000644 00000030525 15125556335 0007556 0 ustar 00 =encoding utf8 =head1 NAME perl5222delta - what is new for perl v5.22.2 =head1 DESCRIPTION This document describes differences between the 5.22.1 release and the 5.22.2 release. If you are upgrading from an earlier release such as 5.22.0, first read L<perl5221delta>, which describes differences between 5.22.0 and 5.22.1. =head1 Security =head2 Fix out of boundary access in Win32 path handling This is CVE-2015-8608. For more information see L<[perl #126755]|https://rt.perl.org/Ticket/Display.html?id=126755>. =head2 Fix loss of taint in C<canonpath()> This is CVE-2015-8607. For more information see L<[perl #126862]|https://rt.perl.org/Ticket/Display.html?id=126862>. =head2 Set proper umask before calling C<mkstemp(3)> In 5.22.0 perl started setting umask to C<0600> before calling C<mkstemp(3)> and restoring it afterwards. This wrongfully tells C<open(2)> to strip the owner read and write bits from the given mode before applying it, rather than the intended negation of leaving only those bits in place. Systems that use mode C<0666> in C<mkstemp(3)> (like old versions of glibc) create a file with permissions C<0066>, leaving world read and write permissions regardless of current umask. This has been fixed by using umask C<0177> instead. L<[perl #127322]|https://rt.perl.org/Ticket/Display.html?id=127322> =head2 Avoid accessing uninitialized memory in Win32 C<crypt()> Validation that will detect both a short salt and invalid characters in the salt has been added. L<[perl #126922]|https://rt.perl.org/Ticket/Display.html?id=126922> =head2 Remove duplicate environment variables from C<environ> Previously, if an environment variable appeared more than once in C<environ[]>, L<C<%ENV>|perlvar/%ENV> would contain the last entry for that name, while a typical C<getenv()> would return the first entry. We now make sure C<%ENV> contains the same as what C<getenv()> returns. Secondly, we now remove duplicates from C<environ[]>, so if a setting with that name is set in C<%ENV> we won't pass an unsafe value to a child process. This is CVE-2016-2381. =head1 Incompatible Changes There are no changes intentionally incompatible with Perl 5.22.1. If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<File::Spec> has been upgraded from version 3.56 to 3.56_01. C<canonpath()> now preserves taint. See L</"Fix loss of taint in C<canonpath()>">. =item * L<Module::CoreList> has been upgraded from version 5.20151213 to 5.20160429. The version number of L<Digest::SHA> listed for Perl 5.18.4 was wrong and has been corrected. Likewise for the version number of L<Config> in 5.18.3 and 5.18.4. L<[perl #127624]|https://rt.perl.org/Ticket/Display.html?id=127624> =back =head1 Documentation =head2 Changes to Existing Documentation =head3 L<perldiag> =over 4 =item * The explanation of the warning "unable to close filehandle %s properly: %s" which can occur when doing an implicit close of a filehandle has been expanded and improved. =back =head3 L<perlfunc> =over 4 =item * The documentation of L<C<hex()>|perlfunc/hex> has been revised to clarify valid inputs. =back =head1 Configuration and Compilation =over 4 =item * Dtrace builds now build successfully on systems with a newer dtrace that require an input object file that uses the probes in the F<.d> file. Previously the probe would fail and cause a build failure. L<[perl #122287]|https://rt.perl.org/Ticket/Display.html?id=122287> =item * F<Configure> no longer probes for F<libnm> by default. Originally this was the "New Math" library, but the name has been re-used by the GNOME NetworkManager. L<[perl #127131]|https://rt.perl.org/Ticket/Display.html?id=127131> =item * F<Configure> now knows about gcc 5. =item * Compiling perl with B<-DPERL_MEM_LOG> now works again. =back =head1 Platform Support =head2 Platform-Specific Notes =over 4 =item Darwin Compiling perl with B<-Dusecbacktrace> on Darwin now works again. L<[perl #127764]|https://rt.perl.org/Ticket/Display.html?id=127764> =item OS X/Darwin Builds with both B<-DDEBUGGING> and threading enabled would fail with a "panic: free from wrong pool" error when built or tested from Terminal on OS X. This was caused by perl's internal management of the environment conflicting with an atfork handler using the libc C<setenv()> function to update the environment. Perl now uses C<setenv()>/C<unsetenv()> to update the environment on OS X. L<[perl #126240]|https://rt.perl.org/Ticket/Display.html?id=126240> =item ppc64el The floating point format of ppc64el (Debian naming for little-endian PowerPC) is now detected correctly. =item Tru64 A test failure in F<t/porting/extrefs.t> has been fixed. =back =head1 Internal Changes =over 4 =item * An unwarranted assertion in C<Perl_newATTRSUB_x()> has been removed. If a stub subroutine definition with a prototype has been seen, then any subsequent stub (or definition) of the same subroutine with an attribute was causing an assertion failure because of a null pointer. L<[perl #126845]|https://rt.perl.org/Ticket/Display.html?id=126845> =back =head1 Selected Bug Fixes =over 4 =item * Calls to the placeholder C<&PL_sv_yes> used internally when an C<import()> or C<unimport()> method isn't found now correctly handle scalar context. L<[perl #126042]|https://rt.perl.org/Ticket/Display.html?id=126042> =item * The L<C<pipe()>|perlfunc/pipe> operator would assert for C<DEBUGGING> builds instead of producing the correct error message. The condition asserted on is detected and reported on correctly without the assertions, so the assertions were removed. L<[perl #126480]|https://rt.perl.org/Ticket/Display.html?id=126480> =item * In some cases, failing to parse a here-doc would attempt to use freed memory. This was caused by a pointer not being restored correctly. L<[perl #126443]|https://rt.perl.org/Ticket/Display.html?id=126443> =item * Perl now reports more context when it sees an array where it expects to see an operator, and avoids an assertion failure. L<[perl #123737]|https://rt.perl.org/Ticket/Display.html?id=123737> =item * If a here-doc was found while parsing another operator, the parser had already read end of file, and the here-doc was not terminated, perl could produce an assertion or a segmentation fault. This now reliably complains about the unterminated here-doc. L<[perl #125540]|https://rt.perl.org/Ticket/Display.html?id=125540> =item * Parsing beyond the end of the buffer when processing a C<#line> directive with no filename is now avoided. L<[perl #127334]|https://rt.perl.org/Ticket/Display.html?id=127334> =item * Perl 5.22.0 added support for the C99 hexadecimal floating point notation, but sometimes misparsed hex floats. This has been fixed. L<[perl #127183]|https://rt.perl.org/Ticket/Display.html?id=127183> =item * Certain regex patterns involving a complemented posix class in an inverted bracketed character class, and matching something else optionally would improperly fail to match. An example of one that could fail is C<qr/_?[^\Wbar]\x{100}/>. This has been fixed. L<[perl #127537]|https://rt.perl.org/Ticket/Display.html?id=127537> =item * Fixed an issue with L<C<pack()>|perlfunc/pack> where C<< pack "H" >> (and C<< pack "h" >>) could read past the source when given a non-utf8 source and a utf8 target. L<[perl #126325]|https://rt.perl.org/Ticket/Display.html?id=126325> =item * Fixed some cases where perl would abort due to a segmentation fault, or a C-level assert. L<[perl #126193]|https://rt.perl.org/Ticket/Display.html?id=126193> L<[perl #126257]|https://rt.perl.org/Ticket/Display.html?id=126257> L<[perl #126258]|https://rt.perl.org/Ticket/Display.html?id=126258> L<[perl #126405]|https://rt.perl.org/Ticket/Display.html?id=126405> L<[perl #126602]|https://rt.perl.org/Ticket/Display.html?id=126602> L<[perl #127773]|https://rt.perl.org/Ticket/Display.html?id=127773> L<[perl #127786]|https://rt.perl.org/Ticket/Display.html?id=127786> =item * A memory leak when setting C<$ENV{foo}> on Darwin has been fixed. L<[perl #126240]|https://rt.perl.org/Ticket/Display.html?id=126240> =item * Perl now correctly raises an error when trying to compile patterns with unterminated character classes while there are trailing backslashes. L<[perl #126141]|https://rt.perl.org/Ticket/Display.html?id=126141> =item * C<NOTHING> regops and C<EXACTFU_SS> regops in C<make_trie()> are now handled properly. L<[perl #126206]|https://rt.perl.org/Ticket/Display.html?id=126206> =item * Perl now only tests C<semctl()> if we have everything needed to use it. In FreeBSD the C<semctl()> entry point may exist, but it can be disabled by policy. L<[perl #127533]|https://rt.perl.org/Ticket/Display.html?id=127533> =item * A regression that allowed undeclared barewords as hash keys to work despite strictures has been fixed. L<[perl #126981]|https://rt.perl.org/Ticket/Display.html?id=126981> =item * As an optimization (introduced in Perl 5.20.0), L<C<uc()>|perlfunc/uc>, L<C<lc()>|perlfunc/lc>, L<C<ucfirst()>|perlfunc/ucfirst> and L<C<lcfirst()>|perlfunc/lcfirst> sometimes modify their argument in-place rather than returning a modified copy. The criteria for this optimization has been made stricter to avoid these functions accidentally modifying in-place when they should not, which has been happening in some cases, e.g. in L<List::Util>. =item * Excessive memory usage in the compilation of some regular expressions involving non-ASCII characters has been reduced. A more complete fix is forthcoming in Perl 5.24.0. =back =head1 Acknowledgements Perl 5.22.2 represents approximately 5 months of development since Perl 5.22.1 and contains approximately 3,000 lines of changes across 110 files from 24 authors. Excluding auto-generated files, documentation and release tools, there were approximately 1,500 lines of changes to 52 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.22.2: Aaron Crane, Abigail, Andreas König, Aristotle Pagaltzis, Chris 'BinGOs' Williams, Craig A. Berry, Dagfinn Ilmari Mannsåker, David Golden, David Mitchell, H.Merijn Brand, James E Keenan, Jarkko Hietaniemi, Karen Etheridge, Karl Williamson, Matthew Horsfall, Niko Tyni, Ricardo Signes, Sawyer X, Stevan Little, Steve Hay, Todd Rinaldo, Tony Cook, Vladimir Timofeev, Yves Orton. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at https://rt.perl.org/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perllexwarn.pod 0000644 00000000543 15125556335 0007627 0 ustar 00 =head1 NAME perllexwarn - Perl Lexical Warnings =head1 DESCRIPTION Perl v5.6.0 introduced lexical control over the handling of warnings by category. The C<warnings> pragma generally replaces the command line flag B<-w>. Documentation on the use of lexical warnings, once partly found in this document, is now found in the L<warnings> documentation. perlartistic.pod 0000644 00000015542 15125556335 0007776 0 ustar 00 =head1 NAME perlartistic - the Perl Artistic License =head1 SYNOPSIS You can refer to this document in Pod via "L<perlartistic>" Or you can see this document by entering "perldoc perlartistic" =head1 DESCRIPTION Perl is free software; you can redistribute it and/or modify it under the terms of either: a) the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version, or b) the "Artistic License" which comes with this Kit. This is B<"The Artistic License">. It's here so that modules, programs, etc., that want to declare this as their distribution license can link to it. For the GNU General Public License, see L<perlgpl>. =head1 The "Artistic License" =head2 Preamble The intent of this document is to state the conditions under which a Package may be copied, such that the Copyright Holder maintains some semblance of artistic control over the development of the package, while giving the users of the package the right to use and distribute the Package in a more-or-less customary fashion, plus the right to make reasonable modifications. =head2 Definitions =over =item "Package" refers to the collection of files distributed by the Copyright Holder, and derivatives of that collection of files created through textual modification. =item "Standard Version" refers to such a Package if it has not been modified, or has been modified in accordance with the wishes of the Copyright Holder as specified below. =item "Copyright Holder" is whoever is named in the copyright or copyrights for the package. =item "You" is you, if you're thinking about copying or distributing this Package. =item "Reasonable copying fee" is whatever you can justify on the basis of media cost, duplication charges, time of people involved, and so on. (You will not be required to justify it to the Copyright Holder, but only to the computing community at large as a market that must bear the fee.) =item "Freely Available" means that no fee is charged for the item itself, though there may be fees involved in handling the item. It also means that recipients of the item may redistribute it under the same conditions they received it. =back =head2 Conditions =over =item 1. You may make and give away verbatim copies of the source form of the Standard Version of this Package without restriction, provided that you duplicate all of the original copyright notices and associated disclaimers. =item 2. You may apply bug fixes, portability fixes and other modifications derived from the Public Domain or from the Copyright Holder. A Package modified in such a way shall still be considered the Standard Version. =item 3. You may otherwise modify your copy of this Package in any way, provided that you insert a prominent notice in each changed file stating how and when you changed that file, and provided that you do at least ONE of the following: =over =item a) place your modifications in the Public Domain or otherwise make them Freely Available, such as by posting said modifications to Usenet or an equivalent medium, or placing the modifications on a major archive site such as uunet.uu.net, or by allowing the Copyright Holder to include your modifications in the Standard Version of the Package. =item b) use the modified Package only within your corporation or organization. =item c) rename any non-standard executables so the names do not conflict with standard executables, which must also be provided, and provide a separate manual page for each non-standard executable that clearly documents how it differs from the Standard Version. =item d) make other distribution arrangements with the Copyright Holder. =back =item 4. You may distribute the programs of this Package in object code or executable form, provided that you do at least ONE of the following: =over =item a) distribute a Standard Version of the executables and library files, together with instructions (in the manual page or equivalent) on where to get the Standard Version. =item b) accompany the distribution with the machine-readable source of the Package with your modifications. =item c) give non-standard executables non-standard names, and clearly document the differences in manual pages (or equivalent), together with instructions on where to get the Standard Version. =item d) make other distribution arrangements with the Copyright Holder. =back =item 5. You may charge a reasonable copying fee for any distribution of this Package. You may charge any fee you choose for support of this Package. You may not charge a fee for this Package itself. However, you may distribute this Package in aggregate with other (possibly commercial) programs as part of a larger (possibly commercial) software distribution provided that you do not advertise this Package as a product of your own. You may embed this Package's interpreter within an executable of yours (by linking); this shall be construed as a mere form of aggregation, provided that the complete Standard Version of the interpreter is so embedded. =item 6. The scripts and library files supplied as input to or produced as output from the programs of this Package do not automatically fall under the copyright of this Package, but belong to whoever generated them, and may be sold commercially, and may be aggregated with this Package. If such scripts or library files are aggregated with this Package via the so-called "undump" or "unexec" methods of producing a binary executable image, then distribution of such an image shall neither be construed as a distribution of this Package nor shall it fall under the restrictions of Paragraphs 3 and 4, provided that you do not represent such an executable image as a Standard Version of this Package. =item 7. C subroutines (or comparably compiled subroutines in other languages) supplied by you and linked into this Package in order to emulate subroutines and variables of the language defined by this Package shall not be considered part of this Package, but are the equivalent of input as in Paragraph 6, provided these subroutines do not change the language in any way that would cause it to fail the regression tests for the language. =item 8. Aggregation of this Package with a commercial distribution is always permitted provided that the use of this Package is embedded; that is, when no overt attempt is made to make this Package's interfaces visible to the end user of the commercial distribution. Such use shall not be construed as a distribution of this Package. =item 9. The name of the Copyright Holder may not be used to endorse or promote products derived from this software without specific prior written permission. =item 10. THIS PACKAGE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. =back The End =cut perldeprecation.pod 0000644 00000050531 15125556335 0010446 0 ustar 00 =head1 NAME perldeprecation - list Perl deprecations =head1 DESCRIPTION The purpose of this document is to document what has been deprecated in Perl, and by which version the deprecated feature will disappear, or, for already removed features, when it was removed. This document will try to discuss what alternatives for the deprecated features are available. The deprecated features will be grouped by the version of Perl in which they will be removed. =head2 Perl 5.34 There are no deprecations or fatalizations scheduled for Perl 5.34. =head2 Perl 5.32 =head3 Constants from lexical variables potentially modified elsewhere You wrote something like my $var; $sub = sub () { $var }; but $var is referenced elsewhere and could be modified after the C<sub> expression is evaluated. Either it is explicitly modified elsewhere (C<$var = 3>) or it is passed to a subroutine or to an operator like C<printf> or C<map>, which may or may not modify the variable. Traditionally, Perl has captured the value of the variable at that point and turned the subroutine into a constant eligible for inlining. In those cases where the variable can be modified elsewhere, this breaks the behavior of closures, in which the subroutine captures the variable itself, rather than its value, so future changes to the variable are reflected in the subroutine's return value. If you intended for the subroutine to be eligible for inlining, then make sure the variable is not referenced elsewhere, possibly by copying it: my $var2 = $var; $sub = sub () { $var2 }; If you do want this subroutine to be a closure that reflects future changes to the variable that it closes over, add an explicit C<return>: my $var; $sub = sub () { return $var }; This usage was deprecated and as of Perl 5.32 is no longer allowed. =head3 Use of strings with code points over 0xFF as arguments to C<vec> C<vec> views its string argument as a sequence of bits. A string containing a code point over 0xFF is nonsensical. This usage is deprecated in Perl 5.28, and was removed in Perl 5.32. =head3 Use of code points over 0xFF in string bitwise operators The string bitwise operators, C<&>, C<|>, C<^>, and C<~>, treat their operands as strings of bytes. As such, values above 0xFF are nonsensical. Some instances of these have been deprecated since Perl 5.24, and were made fatal in 5.28, but it turns out that in cases where the wide characters did not affect the end result, no deprecation notice was raised, and so remain legal. Now, all occurrences either are fatal or raise a deprecation warning, so that the remaining legal occurrences became fatal in 5.32. An example of this is "" & "\x{100}" The wide character is not used in the C<&> operation because the left operand is shorter. This now throws an exception. =head3 hostname() doesn't accept any arguments The function C<hostname()> in the L<Sys::Hostname> module has always been documented to be called with no arguments. Historically it has not enforced this, and has actually accepted and ignored any arguments. As a result, some users have got the mistaken impression that an argument does something useful. To avoid these bugs, the function is being made strict. Passing arguments was deprecated in Perl 5.28 and became fatal in Perl 5.32. =head3 Unescaped left braces in regular expressions The simple rule to remember, if you want to match a literal C<{> character (U+007B C<LEFT CURLY BRACKET>) in a regular expression pattern, is to escape each literal instance of it in some way. Generally easiest is to precede it with a backslash, like C<\{> or enclose it in square brackets (C<[{]>). If the pattern delimiters are also braces, any matching right brace (C<}>) should also be escaped to avoid confusing the parser, for example, qr{abc\{def\}ghi} Forcing literal C<{> characters to be escaped will enable the Perl language to be extended in various ways in future releases. To avoid needlessly breaking existing code, the restriction is not enforced in contexts where there are unlikely to ever be extensions that could conflict with the use there of C<{> as a literal. A non-deprecation warning that the left brace is being taken literally is raised in contexts where there could be confusion about it. Literal uses of C<{> were deprecated in Perl 5.20, and some uses of it started to give deprecation warnings since. These cases were made fatal in Perl 5.26. Due to an oversight, not all cases of a use of a literal C<{> got a deprecation warning. Some cases started warning in Perl 5.26, and were made fatal in Perl 5.30. Other cases started in Perl 5.28, and were made fatal in 5.32. =head3 In XS code, use of various macros dealing with UTF-8. The macros below now require an extra parameter than in versions prior to Perl 5.32. The final parameter in each one is a pointer into the string supplied by the first parameter beyond which the input will not be read. This prevents potential reading beyond the end of the buffer. C<isALPHANUMERIC_utf8>, C<isASCII_utf8>, C<isBLANK_utf8>, C<isCNTRL_utf8>, C<isDIGIT_utf8>, C<isIDFIRST_utf8>, C<isPSXSPC_utf8>, C<isSPACE_utf8>, C<isVERTWS_utf8>, C<isWORDCHAR_utf8>, C<isXDIGIT_utf8>, C<isALPHANUMERIC_LC_utf8>, C<isALPHA_LC_utf8>, C<isASCII_LC_utf8>, C<isBLANK_LC_utf8>, C<isCNTRL_LC_utf8>, C<isDIGIT_LC_utf8>, C<isGRAPH_LC_utf8>, C<isIDCONT_LC_utf8>, C<isIDFIRST_LC_utf8>, C<isLOWER_LC_utf8>, C<isPRINT_LC_utf8>, C<isPSXSPC_LC_utf8>, C<isPUNCT_LC_utf8>, C<isSPACE_LC_utf8>, C<isUPPER_LC_utf8>, C<isWORDCHAR_LC_utf8>, C<isXDIGIT_LC_utf8>, C<toFOLD_utf8>, C<toLOWER_utf8>, C<toTITLE_utf8>, and C<toUPPER_utf8>. Since Perl 5.26, this functionality with the extra parameter has been available by using a corresponding macro to each one of these, and whose name is formed by appending C<_safe> to the base name. There is no change to the functionality of those. For example, C<isDIGIT_utf8_safe> corresponds to C<isDIGIT_utf8>, and both now behave identically. All are documented in L<perlapi/Character case changing> and L<perlapi/Character classification>. This change was originally scheduled for 5.30, but was delayed until 5.32. =head3 C<< File::Glob::glob() >> was removed C<< File::Glob >> has a function called C<< glob >>, which just calls C<< bsd_glob >>. C<< File::Glob::glob() >> was deprecated in Perl 5.8. A deprecation message was issued from Perl 5.26 onwards, and the function has now disappeared in Perl 5.30. Code using C<< File::Glob::glob() >> should call C<< File::Glob::bsd_glob() >> instead. =head2 Perl 5.30 =head3 C<< $* >> is no longer supported Before Perl 5.10, setting C<< $* >> to a true value globally enabled multi-line matching within a string. This relique from the past lost its special meaning in 5.10. Use of this variable will be a fatal error in Perl 5.30, freeing the variable up for a future special meaning. To enable multiline matching one should use the C<< /m >> regexp modifier (possibly in combination with C<< /s >>). This can be set on a per match bases, or can be enabled per lexical scope (including a whole file) with C<< use re '/m' >>. =head3 C<< $# >> is no longer supported This variable used to have a special meaning -- it could be used to control how numbers were formatted when printed. This seldom used functionality was removed in Perl 5.10. In order to free up the variable for a future special meaning, its use will be a fatal error in Perl 5.30. To specify how numbers are formatted when printed, one is advised to use C<< printf >> or C<< sprintf >> instead. =head3 Assigning non-zero to C<< $[ >> is fatal This variable (and the corresponding C<array_base> feature and L<arybase> module) allowed changing the base for array and string indexing operations. Setting this to a non-zero value has been deprecated since Perl 5.12 and throws a fatal error as of Perl 5.30. =head3 C<< File::Glob::glob() >> will disappear C<< File::Glob >> has a function called C<< glob >>, which just calls C<< bsd_glob >>. However, its prototype is different from the prototype of C<< CORE::glob >>, and hence, C<< File::Glob::glob >> should not be used. C<< File::Glob::glob() >> was deprecated in Perl 5.8. A deprecation message was issued from Perl 5.26 onwards, and the function will disappear in Perl 5.30. Code using C<< File::Glob::glob() >> should call C<< File::Glob::bsd_glob() >> instead. =head3 Unescaped left braces in regular expressions (for 5.30) See L</Unescaped left braces in regular expressions> above. =head3 Unqualified C<dump()> Use of C<dump()> instead of C<CORE::dump()> was deprecated in Perl 5.8, and an unqualified C<dump()> will no longer be available in Perl 5.30. See L<perlfunc/dump>. =head3 Using my() in false conditional. There has been a long-standing bug in Perl that causes a lexical variable not to be cleared at scope exit when its declaration includes a false conditional. Some people have exploited this bug to achieve a kind of static variable. To allow us to fix this bug, people should not be relying on this behavior. Instead, it's recommended one uses C<state> variables to achieve the same effect: use 5.10.0; sub count {state $counter; return ++ $counter} say count (); # Prints 1 say count (); # Prints 2 C<state> variables were introduced in Perl 5.10. Alternatively, you can achieve a similar static effect by declaring the variable in a separate block outside the function, e.g., sub f { my $x if 0; return $x++ } becomes { my $x; sub f { return $x++ } } The use of C<my()> in a false conditional has been deprecated in Perl 5.10, and became a fatal error in Perl 5.30. =head3 Reading/writing bytes from/to :utf8 handles. The sysread(), recv(), syswrite() and send() operators are deprecated on handles that have the C<:utf8> layer, either explicitly, or implicitly, eg., with the C<:encoding(UTF-16LE)> layer. Both sysread() and recv() currently use only the C<:utf8> flag for the stream, ignoring the actual layers. Since sysread() and recv() do no UTF-8 validation they can end up creating invalidly encoded scalars. Similarly, syswrite() and send() use only the C<:utf8> flag, otherwise ignoring any layers. If the flag is set, both write the value UTF-8 encoded, even if the layer is some different encoding, such as the example above. Ideally, all of these operators would completely ignore the C<:utf8> state, working only with bytes, but this would result in silently breaking existing code. To avoid this a future version of perl will throw an exception when any of sysread(), recv(), syswrite() or send() are called on handle with the C<:utf8> layer. In Perl 5.30, it will no longer be possible to use sysread(), recv(), syswrite() or send() to read or send bytes from/to :utf8 handles. =head3 Use of unassigned code point or non-standalone grapheme for a delimiter. A grapheme is what appears to a native-speaker of a language to be a character. In Unicode (and hence Perl) a grapheme may actually be several adjacent characters that together form a complete grapheme. For example, there can be a base character, like "R" and an accent, like a circumflex "^", that appear to be a single character when displayed, with the circumflex hovering over the "R". As of Perl 5.30, use of delimiters which are non-standalone graphemes is fatal, in order to move the language to be able to accept multi-character graphemes as delimiters. Also, as of Perl 5.30, delimiters which are unassigned code points but that may someday become assigned are prohibited. Otherwise, code that works today would fail to compile if the currently unassigned delimiter ends up being something that isn't a stand-alone grapheme. Because Unicode is never going to assign L<non-character code points|perlunicode/Noncharacter code points>, nor L<code points that are above the legal Unicode maximum|perlunicode/Beyond Unicode code points>, those can be delimiters. =head2 Perl 5.28 =head3 Attributes C<< :locked >> and C<< :unique >> The attributes C<< :locked >> (on code references) and C<< :unique >> (on array, hash and scalar references) have had no effect since Perl 5.005 and Perl 5.8.8 respectively. Their use has been deprecated since. As of Perl 5.28, these attributes are syntax errors. Since the attributes do not do anything, removing them from your code fixes the syntax error; and removing them will not influence the behaviour of your code. =head3 Bare here-document terminators Perl has allowed you to use a bare here-document terminator to have the here-document end at the first empty line. This practise was deprecated in Perl 5.000; as of Perl 5.28, using a bare here-document terminator throws a fatal error. You are encouraged to use the explicitly quoted form if you wish to use an empty line as the terminator of the here-document: print <<""; Print this line. # Previous blank line ends the here-document. =head3 Setting $/ to a reference to a non-positive integer You assigned a reference to a scalar to C<$/> where the referenced item is not a positive integer. In older perls this B<appeared> to work the same as setting it to C<undef> but was in fact internally different, less efficient and with very bad luck could have resulted in your file being split by a stringified form of the reference. In Perl 5.20.0 this was changed so that it would be B<exactly> the same as setting C<$/> to undef, with the exception that this warning would be thrown. As of Perl 5.28, setting C<$/> to a reference of a non-positive integer throws a fatal error. You are recommended to change your code to set C<$/> to C<undef> explicitly if you wish to slurp the file. =head3 Limit on the value of Unicode code points. Unicode only allows code points up to 0x10FFFF, but Perl allows much larger ones. Up till Perl 5.28, it was allowed to use code points exceeding the maximum value of an integer (C<IV_MAX>). However, that did break the perl interpreter in some constructs, including causing it to hang in a few cases. The known problem areas were in C<tr///>, regular expression pattern matching using quantifiers, as quote delimiters in C<qI<X>...I<X>> (where I<X> is the C<chr()> of a large code point), and as the upper limits in loops. The use of out of range code points was deprecated in Perl 5.24; as of Perl 5.28 using a code point exceeding C<IV_MAX> throws a fatal error. If your code is to run on various platforms, keep in mind that the upper limit depends on the platform. It is much larger on 64-bit word sizes than 32-bit ones. For 32-bit integers, C<IV_MAX> equals C<0x7FFFFFFF>, for 64-bit integers, C<IV_MAX> equals C<0x7FFFFFFFFFFFFFFF>. =head3 Use of comma-less variable list in formats. It was allowed to use a list of variables in a format, without separating them with commas. This usage has been deprecated for a long time, and as of Perl 5.28, this throws a fatal error. =head3 Use of C<\N{}> Use of C<\N{}> with nothing between the braces was deprecated in Perl 5.24, and throws a fatal error as of Perl 5.28. Since such a construct is equivalent to using an empty string, you are recommended to remove such C<\N{}> constructs. =head3 Using the same symbol to open a filehandle and a dirhandle It used to be legal to use C<open()> to associate both a filehandle and a dirhandle to the same symbol (glob or scalar). This idiom is likely to be confusing, and it was deprecated in Perl 5.10. Using the same symbol to C<open()> a filehandle and a dirhandle throws a fatal error as of Perl 5.28. You should be using two different symbols instead. =head3 ${^ENCODING} is no longer supported. The special variable C<${^ENCODING}> was used to implement the C<encoding> pragma. Setting this variable to anything other than C<undef> was deprecated in Perl 5.22. Full deprecation of the variable happened in Perl 5.25.3. Setting this variable to anything other than an undefined value throws a fatal error as of Perl 5.28. =head3 C<< B::OP::terse >> This method, which just calls C<< B::Concise::b_terse >>, has been deprecated, and disappeared in Perl 5.28. Please use C<< B::Concise >> instead. =head3 Use of inherited AUTOLOAD for non-method %s::%s() is no longer allowed As an (ahem) accidental feature, C<AUTOLOAD> subroutines were looked up as methods (using the C<@ISA> hierarchy) even when the subroutines to be autoloaded were called as plain functions (e.g. C<Foo::bar()>), not as methods (e.g. C<< Foo->bar() >> or C<< $obj->bar() >>). This bug was deprecated in Perl 5.004, has been rectified in Perl 5.28 by using method lookup only for methods' C<AUTOLOAD>s. The simple rule is: Inheritance will not work when autoloading non-methods. The simple fix for old code is: In any module that used to depend on inheriting C<AUTOLOAD> for non-methods from a base class named C<BaseClass>, execute C<*AUTOLOAD = \&BaseClass::AUTOLOAD> during startup. In code that currently says C<use AutoLoader; @ISA = qw(AutoLoader);> you should remove AutoLoader from @ISA and change C<use AutoLoader;> to C<use AutoLoader 'AUTOLOAD';>. =head3 Use of code points over 0xFF in string bitwise operators The string bitwise operators, C<&>, C<|>, C<^>, and C<~>, treat their operands as strings of bytes. As such, values above 0xFF are nonsensical. Using such code points with these operators was deprecated in Perl 5.24, and is fatal as of Perl 5.28. =head3 In XS code, use of C<to_utf8_case()> This function has been removed as of Perl 5.28; instead convert to call the appropriate one of: L<C<toFOLD_utf8_safe>|perlapi/toFOLD_utf8_safe>. L<C<toLOWER_utf8_safe>|perlapi/toLOWER_utf8_safe>, L<C<toTITLE_utf8_safe>|perlapi/toTITLE_utf8_safe>, or L<C<toUPPER_utf8_safe>|perlapi/toUPPER_utf8_safe>. =head2 Perl 5.26 =head3 C<< --libpods >> in C<< Pod::Html >> Since Perl 5.18, the option C<< --libpods >> has been deprecated, and using this option did not do anything other than producing a warning. The C<< --libpods >> option is no longer recognized as of Perl 5.26. =head3 The utilities C<< c2ph >> and C<< pstruct >> These old, perl3-era utilities have been deprecated in favour of C<< h2xs >> for a long time. As of Perl 5.26, they have been removed. =head3 Trapping C<< $SIG {__DIE__} >> other than during program exit. The C<$SIG{__DIE__}> hook is called even inside an C<eval()>. It was never intended to happen this way, but an implementation glitch made this possible. This used to be deprecated, as it allowed strange action at a distance like rewriting a pending exception in C<$@>. Plans to rectify this have been scrapped, as users found that rewriting a pending exception is actually a useful feature, and not a bug. Perl never issued a deprecation warning for this; the deprecation was by documentation policy only. But this deprecation has been lifted as of Perl 5.26. =head3 Malformed UTF-8 string in "%s" This message indicates a bug either in the Perl core or in XS code. Such code was trying to find out if a character, allegedly stored internally encoded as UTF-8, was of a given type, such as being punctuation or a digit. But the character was not encoded in legal UTF-8. The C<%s> is replaced by a string that can be used by knowledgeable people to determine what the type being checked against was. Passing malformed strings was deprecated in Perl 5.18, and became fatal in Perl 5.26. =head2 Perl 5.24 =head3 Use of C<< *glob{FILEHANDLE} >> The use of C<< *glob{FILEHANDLE} >> was deprecated in Perl 5.8. The intention was to use C<< *glob{IO} >> instead, for which C<< *glob{FILEHANDLE} >> is an alias. However, this feature was undeprecated in Perl 5.24. =head3 Calling POSIX::%s() is deprecated The following functions in the C<POSIX> module are no longer available: C<isalnum>, C<isalpha>, C<iscntrl>, C<isdigit>, C<isgraph>, C<islower>, C<isprint>, C<ispunct>, C<isspace>, C<isupper>, and C<isxdigit>. The functions are buggy and don't work on UTF-8 encoded strings. See their entries in L<POSIX> for more information. The functions were deprecated in Perl 5.20, and removed in Perl 5.24. =head2 Perl 5.16 =head3 Use of %s on a handle without * is deprecated It used to be possible to use C<tie>, C<tied> or C<untie> on a scalar while the scalar holds a typeglob. This caused its filehandle to be tied. It left no way to tie the scalar itself when it held a typeglob, and no way to untie a scalar that had had a typeglob assigned to it. This was deprecated in Perl 5.14, and the bug was fixed in Perl 5.16. So now C<tie $scalar> will always tie the scalar, not the handle it holds. To tie the handle, use C<tie *$scalar> (with an explicit asterisk). The same applies to C<tied *$scalar> and C<untie *$scalar>. =head1 SEE ALSO L<warnings>, L<diagnostics>. =cut perlnumber.pod 0000644 00000020241 15125556335 0007434 0 ustar 00 =head1 NAME perlnumber - semantics of numbers and numeric operations in Perl =head1 SYNOPSIS $n = 1234; # decimal integer $n = 0b1110011; # binary integer $n = 01234; # octal integer $n = 0x1234; # hexadecimal integer $n = 12.34e-56; # exponential notation $n = "-12.34e56"; # number specified as a string $n = "1234"; # number specified as a string =head1 DESCRIPTION This document describes how Perl internally handles numeric values. Perl's operator overloading facility is completely ignored here. Operator overloading allows user-defined behaviors for numbers, such as operations over arbitrarily large integers, floating points numbers with arbitrary precision, operations over "exotic" numbers such as modular arithmetic or p-adic arithmetic, and so on. See L<overload> for details. =head1 Storing numbers Perl can internally represent numbers in 3 different ways: as native integers, as native floating point numbers, and as decimal strings. Decimal strings may have an exponential notation part, as in C<"12.34e-56">. I<Native> here means "a format supported by the C compiler which was used to build perl". The term "native" does not mean quite as much when we talk about native integers, as it does when native floating point numbers are involved. The only implication of the term "native" on integers is that the limits for the maximal and the minimal supported true integral quantities are close to powers of 2. However, "native" floats have a most fundamental restriction: they may represent only those numbers which have a relatively "short" representation when converted to a binary fraction. For example, 0.9 cannot be represented by a native float, since the binary fraction for 0.9 is infinite: binary0.1110011001100... with the sequence C<1100> repeating again and again. In addition to this limitation, the exponent of the binary number is also restricted when it is represented as a floating point number. On typical hardware, floating point values can store numbers with up to 53 binary digits, and with binary exponents between -1024 and 1024. In decimal representation this is close to 16 decimal digits and decimal exponents in the range of -304..304. The upshot of all this is that Perl cannot store a number like 12345678901234567 as a floating point number on such architectures without loss of information. Similarly, decimal strings can represent only those numbers which have a finite decimal expansion. Being strings, and thus of arbitrary length, there is no practical limit for the exponent or number of decimal digits for these numbers. (But realize that what we are discussing the rules for just the I<storage> of these numbers. The fact that you can store such "large" numbers does not mean that the I<operations> over these numbers will use all of the significant digits. See L</"Numeric operators and numeric conversions"> for details.) In fact numbers stored in the native integer format may be stored either in the signed native form, or in the unsigned native form. Thus the limits for Perl numbers stored as native integers would typically be -2**31..2**32-1, with appropriate modifications in the case of 64-bit integers. Again, this does not mean that Perl can do operations only over integers in this range: it is possible to store many more integers in floating point format. Summing up, Perl numeric values can store only those numbers which have a finite decimal expansion or a "short" binary expansion. =head1 Numeric operators and numeric conversions As mentioned earlier, Perl can store a number in any one of three formats, but most operators typically understand only one of those formats. When a numeric value is passed as an argument to such an operator, it will be converted to the format understood by the operator. Six such conversions are possible: native integer --> native floating point (*) native integer --> decimal string native floating_point --> native integer (*) native floating_point --> decimal string (*) decimal string --> native integer decimal string --> native floating point (*) These conversions are governed by the following general rules: =over 4 =item * If the source number can be represented in the target form, that representation is used. =item * If the source number is outside of the limits representable in the target form, a representation of the closest limit is used. (I<Loss of information>) =item * If the source number is between two numbers representable in the target form, a representation of one of these numbers is used. (I<Loss of information>) =item * In C<< native floating point --> native integer >> conversions the magnitude of the result is less than or equal to the magnitude of the source. (I<"Rounding to zero".>) =item * If the C<< decimal string --> native integer >> conversion cannot be done without loss of information, the result is compatible with the conversion sequence C<< decimal_string --> native_floating_point --> native_integer >>. In particular, rounding is strongly biased to 0, though a number like C<"0.99999999999999999999"> has a chance of being rounded to 1. =back B<RESTRICTION>: The conversions marked with C<(*)> above involve steps performed by the C compiler. In particular, bugs/features of the compiler used may lead to breakage of some of the above rules. =head1 Flavors of Perl numeric operations Perl operations which take a numeric argument treat that argument in one of four different ways: they may force it to one of the integer/floating/ string formats, or they may behave differently depending on the format of the operand. Forcing a numeric value to a particular format does not change the number stored in the value. All the operators which need an argument in the integer format treat the argument as in modular arithmetic, e.g., C<mod 2**32> on a 32-bit architecture. C<sprintf "%u", -1> therefore provides the same result as C<sprintf "%u", ~0>. =over 4 =item Arithmetic operators The binary operators C<+> C<-> C<*> C</> C<%> C<==> C<!=> C<E<gt>> C<E<lt>> C<E<gt>=> C<E<lt>=> and the unary operators C<-> C<abs> and C<--> will attempt to convert arguments to integers. If both conversions are possible without loss of precision, and the operation can be performed without loss of precision then the integer result is used. Otherwise arguments are converted to floating point format and the floating point result is used. The caching of conversions (as described above) means that the integer conversion does not throw away fractional parts on floating point numbers. =item ++ C<++> behaves as the other operators above, except that if it is a string matching the format C</^[a-zA-Z]*[0-9]*\z/> the string increment described in L<perlop> is used. =item Arithmetic operators during C<use integer> In scopes where C<use integer;> is in force, nearly all the operators listed above will force their argument(s) into integer format, and return an integer result. The exceptions, C<abs>, C<++> and C<-->, do not change their behavior with C<use integer;> =item Other mathematical operators Operators such as C<**>, C<sin> and C<exp> force arguments to floating point format. =item Bitwise operators Arguments are forced into the integer format if not strings. =item Bitwise operators during C<use integer> forces arguments to integer format. Also shift operations internally use signed integers rather than the default unsigned. =item Operators which expect an integer force the argument into the integer format. This is applicable to the third and fourth arguments of C<sysread>, for example. =item Operators which expect a string force the argument into the string format. For example, this is applicable to C<printf "%s", $value>. =back Though forcing an argument into a particular form does not change the stored number, Perl remembers the result of such conversions. In particular, though the first such conversion may be time-consuming, repeated operations will not need to redo the conversion. =head1 AUTHOR Ilya Zakharevich C<ilya@math.ohio-state.edu> Editorial adjustments by Gurusamy Sarathy <gsar@ActiveState.com> Updates for 5.8.0 by Nicholas Clark <nick@ccl4.org> =head1 SEE ALSO L<overload>, L<perlop> perlcygwin.pod 0000644 00000065102 15125556335 0007451 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see F<pod/perlpod.pod>) which is specially designed to be readable as is. =head1 NAME perlcygwin - Perl for Cygwin =head1 SYNOPSIS This document will help you configure, make, test and install Perl on Cygwin. This document also describes features of Cygwin that will affect how Perl behaves at runtime. B<NOTE:> There are pre-built Perl packages available for Cygwin and a version of Perl is provided in the normal Cygwin install. If you do not need to customize the configuration, consider using one of those packages. =head1 PREREQUISITES FOR COMPILING PERL ON CYGWIN =head2 Cygwin = GNU+Cygnus+Windows (Don't leave UNIX without it) The Cygwin tools are ports of the popular GNU development tools for Win32 platforms. They run thanks to the Cygwin library which provides the UNIX system calls and environment these programs expect. More information about this project can be found at: L<https://www.cygwin.com/> A recent net or commercial release of Cygwin is required. At the time this document was last updated, Cygwin 1.7.16 was current. =head2 Cygwin Configuration While building Perl some changes may be necessary to your Cygwin setup so that Perl builds cleanly. These changes are B<not> required for normal Perl usage. B<NOTE:> The binaries that are built will run on all Win32 versions. They do not depend on your host system (WinXP/Win2K/Win7) or your Cygwin configuration (binary/text mounts, cvgserver). The only dependencies come from hard-coded pathnames like F</usr/local>. However, your host system and Cygwin configuration will affect Perl's runtime behavior (see L</"TEST">). =over 4 =item * C<PATH> Set the C<PATH> environment variable so that Configure finds the Cygwin versions of programs. Any not-needed Windows directories should be removed or moved to the end of your C<PATH>. =item * I<nroff> If you do not have I<nroff> (which is part of the I<groff> package), Configure will B<not> prompt you to install I<man> pages. =back =head1 CONFIGURE PERL ON CYGWIN The default options gathered by Configure with the assistance of F<hints/cygwin.sh> will build a Perl that supports dynamic loading (which requires a shared F<cygperl5_16.dll>). This will run Configure and keep a record: ./Configure 2>&1 | tee log.configure If you are willing to accept all the defaults run Configure with B<-de>. However, several useful customizations are available. =head2 Stripping Perl Binaries on Cygwin It is possible to strip the EXEs and DLLs created by the build process. The resulting binaries will be significantly smaller. If you want the binaries to be stripped, you can either add a B<-s> option when Configure prompts you, Any additional ld flags (NOT including libraries)? [none] -s Any special flags to pass to g++ to create a dynamically loaded library? [none] -s Any special flags to pass to gcc to use dynamic linking? [none] -s or you can edit F<hints/cygwin.sh> and uncomment the relevant variables near the end of the file. =head2 Optional Libraries for Perl on Cygwin Several Perl functions and modules depend on the existence of some optional libraries. Configure will find them if they are installed in one of the directories listed as being used for library searches. Pre-built packages for most of these are available from the Cygwin installer. =over 4 =item * C<-lcrypt> The crypt package distributed with Cygwin is a Linux compatible 56-bit DES crypt port by Corinna Vinschen. Alternatively, the crypt libraries in GNU libc have been ported to Cygwin. As of libcrypt 1.3 (March 2016), you will need to install the libcrypt-devel package for Configure to detect crypt(). =item * C<-lgdbm_compat> (C<use GDBM_File>) GDBM is available for Cygwin. NOTE: The GDBM library only works on NTFS partitions. =item * C<-ldb> (C<use DB_File>) BerkeleyDB is available for Cygwin. NOTE: The BerkeleyDB library only completely works on NTFS partitions. =item * C<cygserver> (C<use IPC::SysV>) A port of SysV IPC is available for Cygwin. NOTE: This has B<not> been extensively tested. In particular, C<d_semctl_semun> is undefined because it fails a Configure test and on Win9x the I<shm*()> functions seem to hang. It also creates a compile time dependency because F<perl.h> includes F<<sys/ipc.h>> and F<<sys/sem.h>> (which will be required in the future when compiling CPAN modules). CURRENTLY NOT SUPPORTED! =item * C<-lutil> Included with the standard Cygwin netrelease is the inetutils package which includes libutil.a. =back =head2 Configure-time Options for Perl on Cygwin The F<INSTALL> document describes several Configure-time options. Some of these will work with Cygwin, others are not yet possible. Also, some of these are experimental. You can either select an option when Configure prompts you or you can define (undefine) symbols on the command line. =over 4 =item * C<-Uusedl> Undefining this symbol forces Perl to be compiled statically. =item * C<-Dusemymalloc> By default Perl does not use the C<malloc()> included with the Perl source, because it was slower and not entirely thread-safe. If you want to force Perl to build with the old -Dusemymalloc define this. =item * C<-Uuseperlio> Undefining this symbol disables the PerlIO abstraction. PerlIO is now the default; it is not recommended to disable PerlIO. =item * C<-Dusemultiplicity> Multiplicity is required when embedding Perl in a C program and using more than one interpreter instance. This is only required when you build a not-threaded perl with C<-Uuseithreads>. =item * C<-Uuse64bitint> By default Perl uses 64 bit integers. If you want to use smaller 32 bit integers, define this symbol. =item * C<-Duselongdouble> I<gcc> supports long doubles (12 bytes). However, several additional long double math functions are necessary to use them within Perl (I<{atan2, cos, exp, floor, fmod, frexp, isnan, log, modf, pow, sin, sqrt}l, strtold>). These are B<not> yet available with newlib, the Cygwin libc. =item * C<-Uuseithreads> Define this symbol if you want not-threaded faster perl. =item * C<-Duselargefiles> Cygwin uses 64-bit integers for internal size and position calculations, this will be correctly detected and defined by Configure. =item * C<-Dmksymlinks> Use this to build perl outside of the source tree. Details can be found in the F<INSTALL> document. This is the recommended way to build perl from sources. =back =head2 Suspicious Warnings on Cygwin You may see some messages during Configure that seem suspicious. =over 4 =item * Win9x and C<d_eofnblk> Win9x does not correctly report C<EOF> with a non-blocking read on a closed pipe. You will see the following messages: But it also returns -1 to signal EOF, so be careful! WARNING: you can't distinguish between EOF and no data! *** WHOA THERE!!! *** The recommended value for $d_eofnblk on this machine was "define"! Keep the recommended value? [y] At least for consistency with WinNT, you should keep the recommended value. =item * Compiler/Preprocessor defines The following error occurs because of the Cygwin C<#define> of C<_LONG_DOUBLE>: Guessing which symbols your C compiler and preprocessor define... try.c:<line#>: missing binary operator This failure does not seem to cause any problems. With older gcc versions, "parse error" is reported instead of "missing binary operator". =back =head1 MAKE ON CYGWIN Simply run I<make> and wait: make 2>&1 | tee log.make =head1 TEST ON CYGWIN There are two steps to running the test suite: make test 2>&1 | tee log.make-test cd t; ./perl harness 2>&1 | tee ../log.harness The same tests are run both times, but more information is provided when running as C<./perl harness>. Test results vary depending on your host system and your Cygwin configuration. If a test can pass in some Cygwin setup, it is always attempted and explainable test failures are documented. It is possible for Perl to pass all the tests, but it is more likely that some tests will fail for one of the reasons listed below. =head2 File Permissions on Cygwin UNIX file permissions are based on sets of mode bits for {read,write,execute} for each {user,group,other}. By default Cygwin only tracks the Win32 read-only attribute represented as the UNIX file user write bit (files are always readable, files are executable if they have a F<.{com,bat,exe}> extension or begin with C<#!>, directories are always readable and executable). On WinNT with the I<ntea> C<CYGWIN> setting, the additional mode bits are stored as extended file attributes. On WinNT with the default I<ntsec> C<CYGWIN> setting, permissions use the standard WinNT security descriptors and access control lists. Without one of these options, these tests will fail (listing not updated yet): Failed Test List of failed ------------------------------------ io/fs.t 5, 7, 9-10 lib/anydbm.t 2 lib/db-btree.t 20 lib/db-hash.t 16 lib/db-recno.t 18 lib/gdbm.t 2 lib/ndbm.t 2 lib/odbm.t 2 lib/sdbm.t 2 op/stat.t 9, 20 (.tmp not an executable extension) =head2 NDBM_File and ODBM_File do not work on FAT filesystems Do not use NDBM_File or ODBM_File on FAT filesystem. They can be built on a FAT filesystem, but many tests will fail: ../ext/NDBM_File/ndbm.t 13 3328 71 59 83.10% 1-2 4 16-71 ../ext/ODBM_File/odbm.t 255 65280 ?? ?? % ?? ../lib/AnyDBM_File.t 2 512 12 2 16.67% 1 4 ../lib/Memoize/t/errors.t 0 139 11 5 45.45% 7-11 ../lib/Memoize/t/tie_ndbm.t 13 3328 4 4 100.00% 1-4 run/fresh_perl.t 97 1 1.03% 91 If you intend to run only on FAT (or if using AnyDBM_File on FAT), run Configure with the -Ui_ndbm and -Ui_dbm options to prevent NDBM_File and ODBM_File being built. With NTFS (and no CYGWIN=nontsec), there should be no problems even if perl was built on FAT. =head2 C<fork()> failures in io_* tests A C<fork()> failure may result in the following tests failing: ext/IO/lib/IO/t/io_multihomed.t ext/IO/lib/IO/t/io_sock.t ext/IO/lib/IO/t/io_unix.t See comment on fork in L</Miscellaneous> below. =head1 Specific features of the Cygwin port =head2 Script Portability on Cygwin Cygwin does an outstanding job of providing UNIX-like semantics on top of Win32 systems. However, in addition to the items noted above, there are some differences that you should know about. This is a very brief guide to portability, more information can be found in the Cygwin documentation. =over 4 =item * Pathnames Cygwin pathnames are separated by forward (F</>) slashes, Universal Naming Codes (F<//UNC>) are also supported Since cygwin-1.7 non-POSIX pathnames are discouraged. Names may contain all printable characters. File names are case insensitive, but case preserving. A pathname that contains a backslash or drive letter is a Win32 pathname, and not subject to the translations applied to POSIX style pathnames, but cygwin will warn you, so better convert them to POSIX. For conversion we have C<Cygwin::win_to_posix_path()> and C<Cygwin::posix_to_win_path()>. Since cygwin-1.7 pathnames are UTF-8 encoded. =item * Text/Binary Since cygwin-1.7 textmounts are deprecated and strongly discouraged. When a file is opened it is in either text or binary mode. In text mode a file is subject to CR/LF/Ctrl-Z translations. With Cygwin, the default mode for an C<open()> is determined by the mode of the mount that underlies the file. See L</Cygwin::is_binmount>(). Perl provides a C<binmode()> function to set binary mode on files that otherwise would be treated as text. C<sysopen()> with the C<O_TEXT> flag sets text mode on files that otherwise would be treated as binary: sysopen(FOO, "bar", O_WRONLY|O_CREAT|O_TEXT) C<lseek()>, C<tell()> and C<sysseek()> only work with files opened in binary mode. The text/binary issue is covered at length in the Cygwin documentation. =item * PerlIO PerlIO overrides the default Cygwin Text/Binary behaviour. A file will always be treated as binary, regardless of the mode of the mount it lives on, just like it is in UNIX. So CR/LF translation needs to be requested in either the C<open()> call like this: open(FH, ">:crlf", "out.txt"); which will do conversion from LF to CR/LF on the output, or in the environment settings (add this to your .bashrc): export PERLIO=crlf which will pull in the crlf PerlIO layer which does LF -> CRLF conversion on every output generated by perl. =item * F<.exe> The Cygwin C<stat()>, C<lstat()> and C<readlink()> functions make the F<.exe> extension transparent by looking for F<foo.exe> when you ask for F<foo> (unless a F<foo> also exists). Cygwin does not require a F<.exe> extension, but I<gcc> adds it automatically when building a program. However, when accessing an executable as a normal file (e.g., I<cp> in a makefile) the F<.exe> is not transparent. The I<install> program included with Cygwin automatically appends a F<.exe> when necessary. =item * Cygwin vs. Windows process ids Cygwin processes have their own pid, which is different from the underlying windows pid. Most posix compliant Proc functions expect the cygwin pid, but several Win32::Process functions expect the winpid. E.g. C<$$> is the cygwin pid of F</usr/bin/perl>, which is not the winpid. Use C<Cygwin::pid_to_winpid()> and C<Cygwin::winpid_to_pid()> to translate between them. =item * Cygwin vs. Windows errors Under Cygwin, $^E is the same as $!. When using L<Win32 API Functions|Win32>, use C<Win32::GetLastError()> to get the last Windows error. =item * rebase errors on fork or system Using C<fork()> or C<system()> out to another perl after loading multiple dlls may result on a DLL baseaddress conflict. The internal cygwin error looks like like the following: 0 [main] perl 8916 child_info_fork::abort: data segment start: parent (0xC1A000) != child(0xA6A000) or: 183 [main] perl 3588 C:\cygwin\bin\perl.exe: *** fatal error - unable to remap C:\cygwin\bin\cygsvn_subr-1-0.dll to same address as parent(0x6FB30000) != 0x6FE60000 46 [main] perl 3488 fork: child 3588 - died waiting for dll loading, errno11 See L<https://cygwin.com/faq/faq-nochunks.html#faq.using.fixing-fork-failures> It helps if not too many DLLs are loaded in memory so the available address space is larger, e.g. stopping the MS Internet Explorer might help. Use the perlrebase or rebase utilities to resolve the conflicting dll addresses. The rebase package is included in the Cygwin setup. Use F<setup.exe> from L<https://cygwin.com/install.html> to install it. 1. kill all perl processes and run C<perlrebase> or 2. kill all cygwin processes and services, start dash from cmd.exe and run C<rebaseall>. =item * C<chown()> On WinNT C<chown()> can change a file's user and group IDs. On Win9x C<chown()> is a no-op, although this is appropriate since there is no security model. =item * Miscellaneous File locking using the C<F_GETLK> command to C<fcntl()> is a stub that returns C<ENOSYS>. Win9x can not C<rename()> an open file (although WinNT can). The Cygwin C<chroot()> implementation has holes (it can not restrict file access by native Win32 programs). Inplace editing C<perl -i> of files doesn't work without doing a backup of the file being edited C<perl -i.bak> because of windowish restrictions, therefore Perl adds the suffix C<.bak> automatically if you use C<perl -i> without specifying a backup extension. =back =head2 Prebuilt methods: =over 4 =item C<Cwd::cwd> Returns the current working directory. =item C<Cygwin::pid_to_winpid> Translates a cygwin pid to the corresponding Windows pid (which may or may not be the same). =item C<Cygwin::winpid_to_pid> Translates a Windows pid to the corresponding cygwin pid (if any). =item C<Cygwin::win_to_posix_path> Translates a Windows path to the corresponding cygwin path respecting the current mount points. With a second non-null argument returns an absolute path. Double-byte characters will not be translated. =item C<Cygwin::posix_to_win_path> Translates a cygwin path to the corresponding cygwin path respecting the current mount points. With a second non-null argument returns an absolute path. Double-byte characters will not be translated. =item C<Cygwin::mount_table()> Returns an array of [mnt_dir, mnt_fsname, mnt_type, mnt_opts]. perl -e 'for $i (Cygwin::mount_table) {print join(" ",@$i),"\n";}' /bin c:\cygwin\bin system binmode,cygexec /usr/bin c:\cygwin\bin system binmode /usr/lib c:\cygwin\lib system binmode / c:\cygwin system binmode /cygdrive/c c: system binmode,noumount /cygdrive/d d: system binmode,noumount /cygdrive/e e: system binmode,noumount =item C<Cygwin::mount_flags> Returns the mount type and flags for a specified mount point. A comma-separated string of mntent->mnt_type (always "system" or "user"), then the mntent->mnt_opts, where the first is always "binmode" or "textmode". system|user,binmode|textmode,exec,cygexec,cygdrive,mixed, notexec,managed,nosuid,devfs,proc,noumount If the argument is "/cygdrive", then just the volume mount settings, and the cygdrive mount prefix are returned. User mounts override system mounts. $ perl -e 'print Cygwin::mount_flags "/usr/bin"' system,binmode,cygexec $ perl -e 'print Cygwin::mount_flags "/cygdrive"' binmode,cygdrive,/cygdrive =item C<Cygwin::is_binmount> Returns true if the given cygwin path is binary mounted, false if the path is mounted in textmode. =item C<Cygwin::sync_winenv> Cygwin does not initialize all original Win32 environment variables. See the bottom of this page L<https://cygwin.com/cygwin-ug-net/setup-env.html> for "Restricted Win32 environment". Certain Win32 programs called from cygwin programs might need some environment variable, such as e.g. ADODB needs %COMMONPROGRAMFILES%. Call Cygwin::sync_winenv() to copy all Win32 environment variables to your process and note that cygwin will warn on every encounter of non-POSIX paths. =back =head1 INSTALL PERL ON CYGWIN This will install Perl, including I<man> pages. make install 2>&1 | tee log.make-install NOTE: If C<STDERR> is redirected C<make install> will B<not> prompt you to install I<perl> into F</usr/bin>. You may need to be I<Administrator> to run C<make install>. If you are not, you must have write access to the directories in question. Information on installing the Perl documentation in HTML format can be found in the F<INSTALL> document. =head1 MANIFEST ON CYGWIN These are the files in the Perl release that contain references to Cygwin. These very brief notes attempt to explain the reason for all conditional code. Hopefully, keeping this up to date will allow the Cygwin port to be kept as clean as possible. =over 4 =item Documentation INSTALL README.cygwin README.win32 MANIFEST pod/perl.pod pod/perlport.pod pod/perlfaq3.pod pod/perldelta.pod pod/perl5004delta.pod pod/perl56delta.pod pod/perl561delta.pod pod/perl570delta.pod pod/perl572delta.pod pod/perl573delta.pod pod/perl58delta.pod pod/perl581delta.pod pod/perl590delta.pod pod/perlhist.pod pod/perlmodlib.pod pod/perltoc.pod Porting/Glossary pod/perlgit.pod Porting/checkAUTHORS.pl dist/Cwd/Changes ext/Compress-Raw-Zlib/Changes dist/Time-HiRes/Changes ext/Compress-Raw-Zlib/README ext/Compress-Zlib/Changes ext/DB_File/Changes ext/Encode/Changes ext/Sys-Syslog/Changes ext/Win32API-File/Changes lib/ExtUtils/CBuilder/Changes lib/ExtUtils/Changes lib/ExtUtils/NOTES lib/ExtUtils/PATCHING lib/ExtUtils/README lib/Net/Ping/Changes lib/Test/Harness/Changes lib/Term/ANSIColor/ChangeLog lib/Term/ANSIColor/README README.symbian symbian/TODO =item Build, Configure, Make, Install cygwin/Makefile.SHs ext/IPC/SysV/hints/cygwin.pl ext/NDBM_File/hints/cygwin.pl ext/ODBM_File/hints/cygwin.pl hints/cygwin.sh Configure - help finding hints from uname, shared libperl required for dynamic loading Makefile.SH Cross/Makefile-cross-SH - linklibperl Porting/patchls - cygwin in port list installman - man pages with :: translated to . installperl - install dll, install to 'pods' makedepend.SH - uwinfix regen_lib.pl - file permissions NetWare/Makefile plan9/mkfile symbian/sanity.pl symbian/sisify.pl hints/uwin.sh vms/descrip_mms.template win32/Makefile win32/makefile.mk =item Tests t/io/fs.t - no file mode checks if not ntsec skip rename() check when not check_case:relaxed t/io/tell.t - binmode t/lib/cygwin.t - builtin cygwin function tests t/op/groups.t - basegroup has ID = 0 t/op/magic.t - $^X/symlink WORKAROUND, s/.exe// t/op/stat.t - no /dev, skip Win32 ftCreationTime quirk (cache manager sometimes preserves ctime of file previously created and deleted), no -u (setuid) t/op/taint.t - can't use empty path under Cygwin Perl t/op/time.t - no tzset() =item Compiled Perl Source EXTERN.h - __declspec(dllimport) XSUB.h - __declspec(dllexport) cygwin/cygwin.c - os_extras (getcwd, spawn, and several Cygwin:: functions) perl.c - os_extras, -i.bak perl.h - binmode doio.c - win9x can not rename a file when it is open pp_sys.c - do not define h_errno, init _pwent_struct.pw_comment util.c - use setenv util.h - PERL_FILE_IS_ABSOLUTE macro pp.c - Comment about Posix vs IEEE math under Cygwin perlio.c - CR/LF mode perliol.c - Comment about EXTCONST under Cygwin =item Compiled Module Source ext/Compress-Raw-Zlib/Makefile.PL - Can't install via CPAN shell under Cygwin ext/Compress-Raw-Zlib/zlib-src/zutil.h - Cygwin is Unix-like and has vsnprintf ext/Errno/Errno_pm.PL - Special handling for Win32 Perl under Cygwin ext/POSIX/POSIX.xs - tzname defined externally ext/SDBM_File/sdbm/pair.c - EXTCONST needs to be redefined from EXTERN.h ext/SDBM_File/sdbm/sdbm.c - binary open ext/Sys/Syslog/Syslog.xs - Cygwin has syslog.h ext/Sys/Syslog/win32/compile.pl - Convert paths to Windows paths ext/Time-HiRes/HiRes.xs - Various timers not available ext/Time-HiRes/Makefile.PL - Find w32api/windows.h ext/Win32/Makefile.PL - Use various libraries under Cygwin ext/Win32/Win32.xs - Child dir and child env under Cygwin ext/Win32API-File/File.xs - _open_osfhandle not implemented under Cygwin ext/Win32CORE/Win32CORE.c - __declspec(dllexport) =item Perl Modules/Scripts ext/B/t/OptreeCheck.pm - Comment about stderr/stdout order under Cygwin ext/Digest-SHA/bin/shasum - Use binary mode under Cygwin ext/Sys/Syslog/win32/Win32.pm - Convert paths to Windows paths ext/Time-HiRes/HiRes.pm - Comment about various timers not available ext/Win32API-File/File.pm - _open_osfhandle not implemented under Cygwin ext/Win32CORE/Win32CORE.pm - History of Win32CORE under Cygwin lib/Cwd.pm - hook to internal Cwd::cwd lib/ExtUtils/CBuilder/Platform/cygwin.pm - use gcc for ld, and link to libperl.dll.a lib/ExtUtils/CBuilder.pm - Cygwin is Unix-like lib/ExtUtils/Install.pm - Install and rename issues under Cygwin lib/ExtUtils/MM.pm - OS classifications lib/ExtUtils/MM_Any.pm - Example for Cygwin lib/ExtUtils/MakeMaker.pm - require MM_Cygwin.pm lib/ExtUtils/MM_Cygwin.pm - canonpath, cflags, manifypods, perl_archive lib/File/Fetch.pm - Comment about quotes using a Cygwin example lib/File/Find.pm - on remote drives stat() always sets st_nlink to 1 lib/File/Spec/Cygwin.pm - case_tolerant lib/File/Spec/Unix.pm - preserve //unc lib/File/Spec/Win32.pm - References a message on cygwin.com lib/File/Spec.pm - Pulls in lib/File/Spec/Cygwin.pm lib/File/Temp.pm - no directory sticky bit lib/Module/CoreList.pm - List of all module files and versions lib/Net/Domain.pm - No domainname command under Cygwin lib/Net/Netrc.pm - Bypass using stat() under Cygwin lib/Net/Ping.pm - ECONREFUSED is EAGAIN under Cygwin lib/Pod/Find.pm - Set 'pods' dir lib/Pod/Perldoc/ToMan.pm - '-c' switch for pod2man lib/Pod/Perldoc.pm - Use 'less' pager, and use .exe extension lib/Term/ANSIColor.pm - Cygwin terminal info lib/perl5db.pl - use stdin not /dev/tty utils/perlbug.PL - Add CYGWIN environment variable to report =item Perl Module Tests dist/Cwd/t/cwd.t ext/Compress-Zlib/t/14gzopen.t ext/DB_File/t/db-btree.t ext/DB_File/t/db-hash.t ext/DB_File/t/db-recno.t ext/DynaLoader/t/DynaLoader.t ext/File-Glob/t/basic.t ext/GDBM_File/t/gdbm.t ext/POSIX/t/sysconf.t ext/POSIX/t/time.t ext/SDBM_File/t/sdbm.t ext/Sys/Syslog/t/syslog.t ext/Time-HiRes/t/HiRes.t ext/Win32/t/Unicode.t ext/Win32API-File/t/file.t ext/Win32CORE/t/win32core.t lib/AnyDBM_File.t lib/Archive/Extract/t/01_Archive-Extract.t lib/Archive/Tar/t/02_methods.t lib/ExtUtils/t/Embed.t lib/ExtUtils/t/eu_command.t lib/ExtUtils/t/MM_Cygwin.t lib/ExtUtils/t/MM_Unix.t lib/File/Compare.t lib/File/Copy.t lib/File/Find/t/find.t lib/File/Path.t lib/File/Spec/t/crossplatform.t lib/File/Spec/t/Spec.t lib/Net/hostent.t lib/Net/Ping/t/110_icmp_inst.t lib/Net/Ping/t/500_ping_icmp.t lib/Net/t/netrc.t lib/Pod/Simple/t/perlcyg.pod lib/Pod/Simple/t/perlcygo.txt lib/Pod/Simple/t/perlfaq.pod lib/Pod/Simple/t/perlfaqo.txt lib/User/grent.t lib/User/pwent.t =back =head1 BUGS ON CYGWIN Support for swapping real and effective user and group IDs is incomplete. On WinNT Cygwin provides C<setuid()>, C<seteuid()>, C<setgid()> and C<setegid()>. However, additional Cygwin calls for manipulating WinNT access tokens and security contexts are required. =head1 AUTHORS Charles Wilson <cwilson@ece.gatech.edu>, Eric Fifer <egf7@columbia.edu>, alexander smishlajev <als@turnhere.com>, Steven Morlock <newspost@morlock.net>, Sebastien Barre <Sebastien.Barre@utc.fr>, Teun Burgers <burgers@ecn.nl>, Gerrit P. Haase <gp@familiehaase.de>, Reini Urban <rurban@cpan.org>, Jan Dubois <jand@activestate.com>, Jerry D. Hedden <jdhedden@cpan.org>. =head1 HISTORY Last updated: 2012-02-08 perlreftut.pod 0000644 00000044612 15125556335 0007465 0 ustar 00 =head1 NAME perlreftut - Mark's very short tutorial about references =head1 DESCRIPTION One of the most important new features in Perl 5 was the capability to manage complicated data structures like multidimensional arrays and nested hashes. To enable these, Perl 5 introduced a feature called I<references>, and using references is the key to managing complicated, structured data in Perl. Unfortunately, there's a lot of funny syntax to learn, and the main manual page can be hard to follow. The manual is quite complete, and sometimes people find that a problem, because it can be hard to tell what is important and what isn't. Fortunately, you only need to know 10% of what's in the main page to get 90% of the benefit. This page will show you that 10%. =head1 Who Needs Complicated Data Structures? One problem that comes up all the time is needing a hash whose values are lists. Perl has hashes, of course, but the values have to be scalars; they can't be lists. Why would you want a hash of lists? Let's take a simple example: You have a file of city and country names, like this: Chicago, USA Frankfurt, Germany Berlin, Germany Washington, USA Helsinki, Finland New York, USA and you want to produce an output like this, with each country mentioned once, and then an alphabetical list of the cities in that country: Finland: Helsinki. Germany: Berlin, Frankfurt. USA: Chicago, New York, Washington. The natural way to do this is to have a hash whose keys are country names. Associated with each country name key is a list of the cities in that country. Each time you read a line of input, split it into a country and a city, look up the list of cities already known to be in that country, and append the new city to the list. When you're done reading the input, iterate over the hash as usual, sorting each list of cities before you print it out. If hash values couldn't be lists, you lose. You'd probably have to combine all the cities into a single string somehow, and then when time came to write the output, you'd have to break the string into a list, sort the list, and turn it back into a string. This is messy and error-prone. And it's frustrating, because Perl already has perfectly good lists that would solve the problem if only you could use them. =head1 The Solution By the time Perl 5 rolled around, we were already stuck with this design: Hash values must be scalars. The solution to this is references. A reference is a scalar value that I<refers to> an entire array or an entire hash (or to just about anything else). Names are one kind of reference that you're already familiar with. Each human being is a messy, inconvenient collection of cells. But to refer to a particular human, for instance the first computer programmer, it isn't necessary to describe each of their cells; all you need is the easy, convenient scalar string "Ada Lovelace". References in Perl are like names for arrays and hashes. They're Perl's private, internal names, so you can be sure they're unambiguous. Unlike a human name, a reference only refers to one thing, and you always know what it refers to. If you have a reference to an array, you can recover the entire array from it. If you have a reference to a hash, you can recover the entire hash. But the reference is still an easy, compact scalar value. You can't have a hash whose values are arrays; hash values can only be scalars. We're stuck with that. But a single reference can refer to an entire array, and references are scalars, so you can have a hash of references to arrays, and it'll act a lot like a hash of arrays, and it'll be just as useful as a hash of arrays. We'll come back to this city-country problem later, after we've seen some syntax for managing references. =head1 Syntax There are just two ways to make a reference, and just two ways to use it once you have it. =head2 Making References =head3 B<Make Rule 1> If you put a C<\> in front of a variable, you get a reference to that variable. $aref = \@array; # $aref now holds a reference to @array $href = \%hash; # $href now holds a reference to %hash $sref = \$scalar; # $sref now holds a reference to $scalar Once the reference is stored in a variable like $aref or $href, you can copy it or store it just the same as any other scalar value: $xy = $aref; # $xy now holds a reference to @array $p[3] = $href; # $p[3] now holds a reference to %hash $z = $p[3]; # $z now holds a reference to %hash These examples show how to make references to variables with names. Sometimes you want to make an array or a hash that doesn't have a name. This is analogous to the way you like to be able to use the string C<"\n"> or the number 80 without having to store it in a named variable first. =head3 B<Make Rule 2> C<[ ITEMS ]> makes a new, anonymous array, and returns a reference to that array. C<{ ITEMS }> makes a new, anonymous hash, and returns a reference to that hash. $aref = [ 1, "foo", undef, 13 ]; # $aref now holds a reference to an array $href = { APR => 4, AUG => 8 }; # $href now holds a reference to a hash The references you get from rule 2 are the same kind of references that you get from rule 1: # This: $aref = [ 1, 2, 3 ]; # Does the same as this: @array = (1, 2, 3); $aref = \@array; The first line is an abbreviation for the following two lines, except that it doesn't create the superfluous array variable C<@array>. If you write just C<[]>, you get a new, empty anonymous array. If you write just C<{}>, you get a new, empty anonymous hash. =head2 Using References What can you do with a reference once you have it? It's a scalar value, and we've seen that you can store it as a scalar and get it back again just like any scalar. There are just two more ways to use it: =head3 B<Use Rule 1> You can always use an array reference, in curly braces, in place of the name of an array. For example, C<@{$aref}> instead of C<@array>. Here are some examples of that: Arrays: @a @{$aref} An array reverse @a reverse @{$aref} Reverse the array $a[3] ${$aref}[3] An element of the array $a[3] = 17; ${$aref}[3] = 17 Assigning an element On each line are two expressions that do the same thing. The left-hand versions operate on the array C<@a>. The right-hand versions operate on the array that is referred to by C<$aref>. Once they find the array they're operating on, both versions do the same things to the arrays. Using a hash reference is I<exactly> the same: %h %{$href} A hash keys %h keys %{$href} Get the keys from the hash $h{'red'} ${$href}{'red'} An element of the hash $h{'red'} = 17 ${$href}{'red'} = 17 Assigning an element Whatever you want to do with a reference, B<Use Rule 1> tells you how to do it. You just write the Perl code that you would have written for doing the same thing to a regular array or hash, and then replace the array or hash name with C<{$reference}>. "How do I loop over an array when all I have is a reference?" Well, to loop over an array, you would write for my $element (@array) { ... } so replace the array name, C<@array>, with the reference: for my $element (@{$aref}) { ... } "How do I print out the contents of a hash when all I have is a reference?" First write the code for printing out a hash: for my $key (keys %hash) { print "$key => $hash{$key}\n"; } And then replace the hash name with the reference: for my $key (keys %{$href}) { print "$key => ${$href}{$key}\n"; } =head3 B<Use Rule 2> L<B<Use Rule 1>|/B<Use Rule 1>> is all you really need, because it tells you how to do absolutely everything you ever need to do with references. But the most common thing to do with an array or a hash is to extract a single element, and the L<B<Use Rule 1>|/B<Use Rule 1>> notation is cumbersome. So there is an abbreviation. C<${$aref}[3]> is too hard to read, so you can write C<< $aref->[3] >> instead. C<${$href}{red}> is too hard to read, so you can write C<< $href->{red} >> instead. If C<$aref> holds a reference to an array, then C<< $aref->[3] >> is the fourth element of the array. Don't confuse this with C<$aref[3]>, which is the fourth element of a totally different array, one deceptively named C<@aref>. C<$aref> and C<@aref> are unrelated the same way that C<$item> and C<@item> are. Similarly, C<< $href->{'red'} >> is part of the hash referred to by the scalar variable C<$href>, perhaps even one with no name. C<$href{'red'}> is part of the deceptively named C<%href> hash. It's easy to forget to leave out the C<< -> >>, and if you do, you'll get bizarre results when your program gets array and hash elements out of totally unexpected hashes and arrays that weren't the ones you wanted to use. =head2 An Example Let's see a quick example of how all this is useful. First, remember that C<[1, 2, 3]> makes an anonymous array containing C<(1, 2, 3)>, and gives you a reference to that array. Now think about @a = ( [1, 2, 3], [4, 5, 6], [7, 8, 9] ); C<@a> is an array with three elements, and each one is a reference to another array. C<$a[1]> is one of these references. It refers to an array, the array containing C<(4, 5, 6)>, and because it is a reference to an array, L<B<Use Rule 2>|/B<Use Rule 2>> says that we can write C<< $a[1]->[2] >> to get the third element from that array. C<< $a[1]->[2] >> is the 6. Similarly, C<< $a[0]->[1] >> is the 2. What we have here is like a two-dimensional array; you can write C<< $a[ROW]->[COLUMN] >> to get or set the element in any row and any column of the array. The notation still looks a little cumbersome, so there's one more abbreviation: =head2 Arrow Rule In between two B<subscripts>, the arrow is optional. Instead of C<< $a[1]->[2] >>, we can write C<$a[1][2]>; it means the same thing. Instead of C<< $a[0]->[1] = 23 >>, we can write C<$a[0][1] = 23>; it means the same thing. Now it really looks like two-dimensional arrays! You can see why the arrows are important. Without them, we would have had to write C<${$a[1]}[2]> instead of C<$a[1][2]>. For three-dimensional arrays, they let us write C<$x[2][3][5]> instead of the unreadable C<${${$x[2]}[3]}[5]>. =head1 Solution Here's the answer to the problem I posed earlier, of reformatting a file of city and country names. 1 my %table; 2 while (<>) { 3 chomp; 4 my ($city, $country) = split /, /; 5 $table{$country} = [] unless exists $table{$country}; 6 push @{$table{$country}}, $city; 7 } 8 for my $country (sort keys %table) { 9 print "$country: "; 10 my @cities = @{$table{$country}}; 11 print join ', ', sort @cities; 12 print ".\n"; 13 } The program has two pieces: Lines 2-7 read the input and build a data structure, and lines 8-13 analyze the data and print out the report. We're going to have a hash, C<%table>, whose keys are country names, and whose values are references to arrays of city names. The data structure will look like this: %table +-------+---+ | | | +-----------+--------+ |Germany| *---->| Frankfurt | Berlin | | | | +-----------+--------+ +-------+---+ | | | +----------+ |Finland| *---->| Helsinki | | | | +----------+ +-------+---+ | | | +---------+------------+----------+ | USA | *---->| Chicago | Washington | New York | | | | +---------+------------+----------+ +-------+---+ We'll look at output first. Supposing we already have this structure, how do we print it out? 8 for my $country (sort keys %table) { 9 print "$country: "; 10 my @cities = @{$table{$country}}; 11 print join ', ', sort @cities; 12 print ".\n"; 13 } C<%table> is an ordinary hash, and we get a list of keys from it, sort the keys, and loop over the keys as usual. The only use of references is in line 10. C<$table{$country}> looks up the key C<$country> in the hash and gets the value, which is a reference to an array of cities in that country. L<B<Use Rule 1>|/B<Use Rule 1>> says that we can recover the array by saying C<@{$table{$country}}>. Line 10 is just like @cities = @array; except that the name C<array> has been replaced by the reference C<{$table{$country}}>. The C<@> tells Perl to get the entire array. Having gotten the list of cities, we sort it, join it, and print it out as usual. Lines 2-7 are responsible for building the structure in the first place. Here they are again: 2 while (<>) { 3 chomp; 4 my ($city, $country) = split /, /; 5 $table{$country} = [] unless exists $table{$country}; 6 push @{$table{$country}}, $city; 7 } Lines 2-4 acquire a city and country name. Line 5 looks to see if the country is already present as a key in the hash. If it's not, the program uses the C<[]> notation (L<B<Make Rule 2>|/B<Make Rule 2>>) to manufacture a new, empty anonymous array of cities, and installs a reference to it into the hash under the appropriate key. Line 6 installs the city name into the appropriate array. C<$table{$country}> now holds a reference to the array of cities seen in that country so far. Line 6 is exactly like push @array, $city; except that the name C<array> has been replaced by the reference C<{$table{$country}}>. The L<C<push>|perlfunc/push ARRAY,LIST> adds a city name to the end of the referred-to array. There's one fine point I skipped. Line 5 is unnecessary, and we can get rid of it. 2 while (<>) { 3 chomp; 4 my ($city, $country) = split /, /; 5 #### $table{$country} = [] unless exists $table{$country}; 6 push @{$table{$country}}, $city; 7 } If there's already an entry in C<%table> for the current C<$country>, then nothing is different. Line 6 will locate the value in C<$table{$country}>, which is a reference to an array, and push C<$city> into the array. But what does it do when C<$country> holds a key, say C<Greece>, that is not yet in C<%table>? This is Perl, so it does the exact right thing. It sees that you want to push C<Athens> onto an array that doesn't exist, so it helpfully makes a new, empty, anonymous array for you, installs it into C<%table>, and then pushes C<Athens> onto it. This is called I<autovivification>--bringing things to life automatically. Perl saw that the key wasn't in the hash, so it created a new hash entry automatically. Perl saw that you wanted to use the hash value as an array, so it created a new empty array and installed a reference to it in the hash automatically. And as usual, Perl made the array one element longer to hold the new city name. =head1 The Rest I promised to give you 90% of the benefit with 10% of the details, and that means I left out 90% of the details. Now that you have an overview of the important parts, it should be easier to read the L<perlref> manual page, which discusses 100% of the details. Some of the highlights of L<perlref>: =over 4 =item * You can make references to anything, including scalars, functions, and other references. =item * In L<B<Use Rule 1>|/B<Use Rule 1>>, you can omit the curly brackets whenever the thing inside them is an atomic scalar variable like C<$aref>. For example, C<@$aref> is the same as C<@{$aref}>, and C<$$aref[1]> is the same as C<${$aref}[1]>. If you're just starting out, you may want to adopt the habit of always including the curly brackets. =item * This doesn't copy the underlying array: $aref2 = $aref1; You get two references to the same array. If you modify C<< $aref1->[23] >> and then look at C<< $aref2->[23] >> you'll see the change. To copy the array, use $aref2 = [@{$aref1}]; This uses C<[...]> notation to create a new anonymous array, and C<$aref2> is assigned a reference to the new array. The new array is initialized with the contents of the array referred to by C<$aref1>. Similarly, to copy an anonymous hash, you can use $href2 = {%{$href1}}; =item * To see if a variable contains a reference, use the L<C<ref>|perlfunc/ref EXPR> function. It returns true if its argument is a reference. Actually it's a little better than that: It returns C<HASH> for hash references and C<ARRAY> for array references. =item * If you try to use a reference like a string, you get strings like ARRAY(0x80f5dec) or HASH(0x826afc0) If you ever see a string that looks like this, you'll know you printed out a reference by mistake. A side effect of this representation is that you can use L<C<eq>|perlop/Equality Operators> to see if two references refer to the same thing. (But you should usually use L<C<==>|perlop/Equality Operators> instead because it's much faster.) =item * You can use a string as if it were a reference. If you use the string C<"foo"> as an array reference, it's taken to be a reference to the array C<@foo>. This is called a I<symbolic reference>. The declaration L<C<use strict 'refs'>|strict> disables this feature, which can cause all sorts of trouble if you use it by accident. =back You might prefer to go on to L<perllol> instead of L<perlref>; it discusses lists of lists and multidimensional arrays in detail. After that, you should move on to L<perldsc>; it's a Data Structure Cookbook that shows recipes for using and printing out arrays of hashes, hashes of arrays, and other kinds of data. =head1 Summary Everyone needs compound data structures, and in Perl the way you get them is with references. There are four important rules for managing references: Two for making references and two for using them. Once you know these rules you can do most of the important things you need to do with references. =head1 Credits Author: Mark Jason Dominus, Plover Systems (C<mjd-perl-ref+@plover.com>) This article originally appeared in I<The Perl Journal> ( L<http://www.tpj.com/> ) volume 3, #2. Reprinted with permission. The original title was I<Understand References Today>. =head2 Distribution Conditions Copyright 1998 The Perl Journal. This documentation is free; you can redistribute it and/or modify it under the same terms as Perl itself. Irrespective of its distribution, all code examples in these files are hereby placed into the public domain. You are permitted and encouraged to use this code in your own programs for fun or for profit as you see fit. A simple comment in the code giving credit would be courteous but is not required. =cut perl585delta.pod 0000644 00000013401 15125556335 0007477 0 ustar 00 =head1 NAME perl585delta - what is new for perl v5.8.5 =head1 DESCRIPTION This document describes differences between the 5.8.4 release and the 5.8.5 release. =head1 Incompatible Changes There are no changes incompatible with 5.8.4. =head1 Core Enhancements Perl's regular expression engine now contains support for matching on the intersection of two Unicode character classes. You can also now refer to user-defined character classes from within other user defined character classes. =head1 Modules and Pragmata =over 4 =item * Carp improved to work nicely with Safe. Carp's message reporting should now be anomaly free - it will always print out line number information. =item * CGI upgraded to version 3.05 =item * charnames now avoids clobbering $_ =item * Digest upgraded to version 1.08 =item * Encode upgraded to version 2.01 =item * FileCache upgraded to version 1.04 =item * libnet upgraded to version 1.19 =item * Pod::Parser upgraded to version 1.28 =item * Pod::Perldoc upgraded to version 3.13 =item * Pod::LaTeX upgraded to version 0.57 =item * Safe now works properly with Carp =item * Scalar-List-Utils upgraded to version 1.14 =item * Shell's documentation has been re-written, and its historical partial auto-quoting of command arguments can now be disabled. =item * Test upgraded to version 1.25 =item * Test::Harness upgraded to version 2.42 =item * Time::Local upgraded to version 1.10 =item * Unicode::Collate upgraded to version 0.40 =item * Unicode::Normalize upgraded to version 0.30 =back =head1 Utility Changes =head2 Perl's debugger The debugger can now emulate stepping backwards, by restarting and rerunning all bar the last command from a saved command history. =head2 h2ph F<h2ph> is now able to understand a very limited set of C inline functions -- basically, the inline functions that look like CPP macros. This has been introduced to deal with some of the headers of the newest versions of the glibc. The standard warning still applies; to quote F<h2ph>'s documentation, I<you may need to dicker with the files produced>. =head1 Installation and Configuration Improvements Perl 5.8.5 should build cleanly from source on LynxOS. =head1 Selected Bug Fixes =over 4 =item * The in-place sort optimisation introduced in 5.8.4 had a bug. For example, in code such as @a = sort ($b, @a) the result would omit the value $b. This is now fixed. =item * The optimisation for unnecessary assignments introduced in 5.8.4 could give spurious warnings. This has been fixed. =item * Perl should now correctly detect and read BOM-marked and (BOMless) UTF-16 scripts of either endianness. =item * Creating a new thread when weak references exist was buggy, and would often cause warnings at interpreter destruction time. The known bug is now fixed. =item * Several obscure bugs involving manipulating Unicode strings with C<substr> have been fixed. =item * Previously if Perl's file globbing function encountered a directory that it did not have permission to open it would return immediately, leading to unexpected truncation of the list of results. This has been fixed, to be consistent with Unix shells' globbing behaviour. =item * Thread creation time could vary wildly between identical runs. This was caused by a poor hashing algorithm in the thread cloning routines, which has now been fixed. =item * The internals of the ithreads implementation were not checking if OS-level thread creation had failed. threads->create() now returns C<undef> in if thread creation fails instead of crashing perl. =back =head1 New or Changed Diagnostics =over 4 =item * Perl -V has several improvements =over 4 =item * correctly outputs local patch names that contain embedded code snippets or other characters that used to confuse it. =item * arguments to -V that look like regexps will give multiple lines of output. =item * a trailing colon suppresses the linefeed and ';' terminator, allowing embedding of queries into shell commands. =item * a leading colon removes the 'name=' part of the response, allowing mapping to any name. =back =item * When perl fails to find the specified script, it now outputs a second line suggesting that the user use the C<-S> flag: $ perl5.8.5 missing.pl Can't open perl script "missing.pl": No such file or directory. Use -S to search $PATH for it. =back =head1 Changed Internals The Unicode character class files used by the regular expression engine are now built at build time from the supplied Unicode consortium data files, instead of being shipped prebuilt. This makes the compressed Perl source tarball about 200K smaller. A side effect is that the layout of files inside lib/unicore has changed. =head1 Known Problems The regression test F<t/uni/class.t> is now performing considerably more tests, and can take several minutes to run even on a fast machine. =head1 Platform Specific Problems This release is known not to build on Windows 95. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://bugs.perl.org. There may also be information at http://www.perl.org, the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. You can browse and search the Perl 5 bugs at http://bugs.perl.org/ =head1 SEE ALSO The F<Changes> file for exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlpodspec.pod 0000644 00000206024 15125556335 0007606 0 ustar 00 =encoding utf8 =head1 NAME perlpodspec - Plain Old Documentation: format specification and notes =head1 DESCRIPTION This document is detailed notes on the Pod markup language. Most people will only have to read L<perlpod|perlpod> to know how to write in Pod, but this document may answer some incidental questions to do with parsing and rendering Pod. In this document, "must" / "must not", "should" / "should not", and "may" have their conventional (cf. RFC 2119) meanings: "X must do Y" means that if X doesn't do Y, it's against this specification, and should really be fixed. "X should do Y" means that it's recommended, but X may fail to do Y, if there's a good reason. "X may do Y" is merely a note that X can do Y at will (although it is up to the reader to detect any connotation of "and I think it would be I<nice> if X did Y" versus "it wouldn't really I<bother> me if X did Y"). Notably, when I say "the parser should do Y", the parser may fail to do Y, if the calling application explicitly requests that the parser I<not> do Y. I often phrase this as "the parser should, by default, do Y." This doesn't I<require> the parser to provide an option for turning off whatever feature Y is (like expanding tabs in verbatim paragraphs), although it implicates that such an option I<may> be provided. =head1 Pod Definitions Pod is embedded in files, typically Perl source files, although you can write a file that's nothing but Pod. A B<line> in a file consists of zero or more non-newline characters, terminated by either a newline or the end of the file. A B<newline sequence> is usually a platform-dependent concept, but Pod parsers should understand it to mean any of CR (ASCII 13), LF (ASCII 10), or a CRLF (ASCII 13 followed immediately by ASCII 10), in addition to any other system-specific meaning. The first CR/CRLF/LF sequence in the file may be used as the basis for identifying the newline sequence for parsing the rest of the file. A B<blank line> is a line consisting entirely of zero or more spaces (ASCII 32) or tabs (ASCII 9), and terminated by a newline or end-of-file. A B<non-blank line> is a line containing one or more characters other than space or tab (and terminated by a newline or end-of-file). (I<Note:> Many older Pod parsers did not accept a line consisting of spaces/tabs and then a newline as a blank line. The only lines they considered blank were lines consisting of I<no characters at all>, terminated by a newline.) B<Whitespace> is used in this document as a blanket term for spaces, tabs, and newline sequences. (By itself, this term usually refers to literal whitespace. That is, sequences of whitespace characters in Pod source, as opposed to "EE<lt>32>", which is a formatting code that I<denotes> a whitespace character.) A B<Pod parser> is a module meant for parsing Pod (regardless of whether this involves calling callbacks or building a parse tree or directly formatting it). A B<Pod formatter> (or B<Pod translator>) is a module or program that converts Pod to some other format (HTML, plaintext, TeX, PostScript, RTF). A B<Pod processor> might be a formatter or translator, or might be a program that does something else with the Pod (like counting words, scanning for index points, etc.). Pod content is contained in B<Pod blocks>. A Pod block starts with a line that matches C<m/\A=[a-zA-Z]/>, and continues up to the next line that matches C<m/\A=cut/> or up to the end of the file if there is no C<m/\A=cut/> line. =for comment The current perlsyn says: [beginquote] Note that pod translators should look at only paragraphs beginning with a pod directive (it makes parsing easier), whereas the compiler actually knows to look for pod escapes even in the middle of a paragraph. This means that the following secret stuff will be ignored by both the compiler and the translators. $a=3; =secret stuff warn "Neither POD nor CODE!?" =cut back print "got $a\n"; You probably shouldn't rely upon the warn() being podded out forever. Not all pod translators are well-behaved in this regard, and perhaps the compiler will become pickier. [endquote] I think that those paragraphs should just be removed; paragraph-based parsing seems to have been largely abandoned, because of the hassle with non-empty blank lines messing up what people meant by "paragraph". Even if the "it makes parsing easier" bit were especially true, it wouldn't be worth the confusion of having perl and pod2whatever actually disagree on what can constitute a Pod block. Note that a parser is not expected to distinguish between something that looks like pod, but is in a quoted string, such as a here document. Within a Pod block, there are B<Pod paragraphs>. A Pod paragraph consists of non-blank lines of text, separated by one or more blank lines. For purposes of Pod processing, there are four types of paragraphs in a Pod block: =over =item * A command paragraph (also called a "directive"). The first line of this paragraph must match C<m/\A=[a-zA-Z]/>. Command paragraphs are typically one line, as in: =head1 NOTES =item * But they may span several (non-blank) lines: =for comment Hm, I wonder what it would look like if you tried to write a BNF for Pod from this. =head3 Dr. Strangelove, or: How I Learned to Stop Worrying and Love the Bomb I<Some> command paragraphs allow formatting codes in their content (i.e., after the part that matches C<m/\A=[a-zA-Z]\S*\s*/>), as in: =head1 Did You Remember to C<use strict;>? In other words, the Pod processing handler for "head1" will apply the same processing to "Did You Remember to CE<lt>use strict;>?" that it would to an ordinary paragraph (i.e., formatting codes like "CE<lt>...>") are parsed and presumably formatted appropriately, and whitespace in the form of literal spaces and/or tabs is not significant. =item * A B<verbatim paragraph>. The first line of this paragraph must be a literal space or tab, and this paragraph must not be inside a "=begin I<identifier>", ... "=end I<identifier>" sequence unless "I<identifier>" begins with a colon (":"). That is, if a paragraph starts with a literal space or tab, but I<is> inside a "=begin I<identifier>", ... "=end I<identifier>" region, then it's a data paragraph, unless "I<identifier>" begins with a colon. Whitespace I<is> significant in verbatim paragraphs (although, in processing, tabs are probably expanded). =item * An B<ordinary paragraph>. A paragraph is an ordinary paragraph if its first line matches neither C<m/\A=[a-zA-Z]/> nor C<m/\A[ \t]/>, I<and> if it's not inside a "=begin I<identifier>", ... "=end I<identifier>" sequence unless "I<identifier>" begins with a colon (":"). =item * A B<data paragraph>. This is a paragraph that I<is> inside a "=begin I<identifier>" ... "=end I<identifier>" sequence where "I<identifier>" does I<not> begin with a literal colon (":"). In some sense, a data paragraph is not part of Pod at all (i.e., effectively it's "out-of-band"), since it's not subject to most kinds of Pod parsing; but it is specified here, since Pod parsers need to be able to call an event for it, or store it in some form in a parse tree, or at least just parse I<around> it. =back For example: consider the following paragraphs: # <- that's the 0th column =head1 Foo Stuff $foo->bar =cut Here, "=head1 Foo" and "=cut" are command paragraphs because the first line of each matches C<m/\A=[a-zA-Z]/>. "I<[space][space]>$foo->bar" is a verbatim paragraph, because its first line starts with a literal whitespace character (and there's no "=begin"..."=end" region around). The "=begin I<identifier>" ... "=end I<identifier>" commands stop paragraphs that they surround from being parsed as ordinary or verbatim paragraphs, if I<identifier> doesn't begin with a colon. This is discussed in detail in the section L</About Data Paragraphs and "=beginE<sol>=end" Regions>. =head1 Pod Commands This section is intended to supplement and clarify the discussion in L<perlpod/"Command Paragraph">. These are the currently recognized Pod commands: =over =item "=head1", "=head2", "=head3", "=head4" This command indicates that the text in the remainder of the paragraph is a heading. That text may contain formatting codes. Examples: =head1 Object Attributes =head3 What B<Not> to Do! =item "=pod" This command indicates that this paragraph begins a Pod block. (If we are already in the middle of a Pod block, this command has no effect at all.) If there is any text in this command paragraph after "=pod", it must be ignored. Examples: =pod This is a plain Pod paragraph. =pod This text is ignored. =item "=cut" This command indicates that this line is the end of this previously started Pod block. If there is any text after "=cut" on the line, it must be ignored. Examples: =cut =cut The documentation ends here. =cut # This is the first line of program text. sub foo { # This is the second. It is an error to try to I<start> a Pod block with a "=cut" command. In that case, the Pod processor must halt parsing of the input file, and must by default emit a warning. =item "=over" This command indicates that this is the start of a list/indent region. If there is any text following the "=over", it must consist of only a nonzero positive numeral. The semantics of this numeral is explained in the L</"About =over...=back Regions"> section, further below. Formatting codes are not expanded. Examples: =over 3 =over 3.5 =over =item "=item" This command indicates that an item in a list begins here. Formatting codes are processed. The semantics of the (optional) text in the remainder of this paragraph are explained in the L</"About =over...=back Regions"> section, further below. Examples: =item =item * =item * =item 14 =item 3. =item C<< $thing->stuff(I<dodad>) >> =item For transporting us beyond seas to be tried for pretended offenses =item He is at this time transporting large armies of foreign mercenaries to complete the works of death, desolation and tyranny, already begun with circumstances of cruelty and perfidy scarcely paralleled in the most barbarous ages, and totally unworthy the head of a civilized nation. =item "=back" This command indicates that this is the end of the region begun by the most recent "=over" command. It permits no text after the "=back" command. =item "=begin formatname" =item "=begin formatname parameter" This marks the following paragraphs (until the matching "=end formatname") as being for some special kind of processing. Unless "formatname" begins with a colon, the contained non-command paragraphs are data paragraphs. But if "formatname" I<does> begin with a colon, then non-command paragraphs are ordinary paragraphs or data paragraphs. This is discussed in detail in the section L</About Data Paragraphs and "=beginE<sol>=end" Regions>. It is advised that formatnames match the regexp C<m/\A:?[-a-zA-Z0-9_]+\z/>. Everything following whitespace after the formatname is a parameter that may be used by the formatter when dealing with this region. This parameter must not be repeated in the "=end" paragraph. Implementors should anticipate future expansion in the semantics and syntax of the first parameter to "=begin"/"=end"/"=for". =item "=end formatname" This marks the end of the region opened by the matching "=begin formatname" region. If "formatname" is not the formatname of the most recent open "=begin formatname" region, then this is an error, and must generate an error message. This is discussed in detail in the section L</About Data Paragraphs and "=beginE<sol>=end" Regions>. =item "=for formatname text..." This is synonymous with: =begin formatname text... =end formatname That is, it creates a region consisting of a single paragraph; that paragraph is to be treated as a normal paragraph if "formatname" begins with a ":"; if "formatname" I<doesn't> begin with a colon, then "text..." will constitute a data paragraph. There is no way to use "=for formatname text..." to express "text..." as a verbatim paragraph. =item "=encoding encodingname" This command, which should occur early in the document (at least before any non-US-ASCII data!), declares that this document is encoded in the encoding I<encodingname>, which must be an encoding name that L<Encode> recognizes. (Encode's list of supported encodings, in L<Encode::Supported>, is useful here.) If the Pod parser cannot decode the declared encoding, it should emit a warning and may abort parsing the document altogether. A document having more than one "=encoding" line should be considered an error. Pod processors may silently tolerate this if the not-first "=encoding" lines are just duplicates of the first one (e.g., if there's a "=encoding utf8" line, and later on another "=encoding utf8" line). But Pod processors should complain if there are contradictory "=encoding" lines in the same document (e.g., if there is a "=encoding utf8" early in the document and "=encoding big5" later). Pod processors that recognize BOMs may also complain if they see an "=encoding" line that contradicts the BOM (e.g., if a document with a UTF-16LE BOM has an "=encoding shiftjis" line). =back If a Pod processor sees any command other than the ones listed above (like "=head", or "=haed1", or "=stuff", or "=cuttlefish", or "=w123"), that processor must by default treat this as an error. It must not process the paragraph beginning with that command, must by default warn of this as an error, and may abort the parse. A Pod parser may allow a way for particular applications to add to the above list of known commands, and to stipulate, for each additional command, whether formatting codes should be processed. Future versions of this specification may add additional commands. =head1 Pod Formatting Codes (Note that in previous drafts of this document and of perlpod, formatting codes were referred to as "interior sequences", and this term may still be found in the documentation for Pod parsers, and in error messages from Pod processors.) There are two syntaxes for formatting codes: =over =item * A formatting code starts with a capital letter (just US-ASCII [A-Z]) followed by a "<", any number of characters, and ending with the first matching ">". Examples: That's what I<you> think! What's C<CORE::dump()> for? X<C<chmod> and C<unlink()> Under Different Operating Systems> =item * A formatting code starts with a capital letter (just US-ASCII [A-Z]) followed by two or more "<"'s, one or more whitespace characters, any number of characters, one or more whitespace characters, and ending with the first matching sequence of two or more ">"'s, where the number of ">"'s equals the number of "<"'s in the opening of this formatting code. Examples: That's what I<< you >> think! C<<< open(X, ">>thing.dat") || die $! >>> B<< $foo->bar(); >> With this syntax, the whitespace character(s) after the "CE<lt><<" and before the ">>>" (or whatever letter) are I<not> renderable. They do not signify whitespace, are merely part of the formatting codes themselves. That is, these are all synonymous: C<thing> C<< thing >> C<< thing >> C<<< thing >>> C<<<< thing >>>> and so on. Finally, the multiple-angle-bracket form does I<not> alter the interpretation of nested formatting codes, meaning that the following four example lines are identical in meaning: B<example: C<$a E<lt>=E<gt> $b>> B<example: C<< $a <=> $b >>> B<example: C<< $a E<lt>=E<gt> $b >>> B<<< example: C<< $a E<lt>=E<gt> $b >> >>> =back In parsing Pod, a notably tricky part is the correct parsing of (potentially nested!) formatting codes. Implementors should consult the code in the C<parse_text> routine in Pod::Parser as an example of a correct implementation. =over =item C<IE<lt>textE<gt>> -- italic text See the brief discussion in L<perlpod/"Formatting Codes">. =item C<BE<lt>textE<gt>> -- bold text See the brief discussion in L<perlpod/"Formatting Codes">. =item C<CE<lt>codeE<gt>> -- code text See the brief discussion in L<perlpod/"Formatting Codes">. =item C<FE<lt>filenameE<gt>> -- style for filenames See the brief discussion in L<perlpod/"Formatting Codes">. =item C<XE<lt>topic nameE<gt>> -- an index entry See the brief discussion in L<perlpod/"Formatting Codes">. This code is unusual in that most formatters completely discard this code and its content. Other formatters will render it with invisible codes that can be used in building an index of the current document. =item C<ZE<lt>E<gt>> -- a null (zero-effect) formatting code Discussed briefly in L<perlpod/"Formatting Codes">. This code is unusual in that it should have no content. That is, a processor may complain if it sees C<ZE<lt>potatoesE<gt>>. Whether or not it complains, the I<potatoes> text should ignored. =item C<LE<lt>nameE<gt>> -- a hyperlink The complicated syntaxes of this code are discussed at length in L<perlpod/"Formatting Codes">, and implementation details are discussed below, in L</"About LE<lt>...E<gt> Codes">. Parsing the contents of LE<lt>content> is tricky. Notably, the content has to be checked for whether it looks like a URL, or whether it has to be split on literal "|" and/or "/" (in the right order!), and so on, I<before> EE<lt>...> codes are resolved. =item C<EE<lt>escapeE<gt>> -- a character escape See L<perlpod/"Formatting Codes">, and several points in L</Notes on Implementing Pod Processors>. =item C<SE<lt>textE<gt>> -- text contains non-breaking spaces This formatting code is syntactically simple, but semantically complex. What it means is that each space in the printable content of this code signifies a non-breaking space. Consider: C<$x ? $y : $z> S<C<$x ? $y : $z>> Both signify the monospace (c[ode] style) text consisting of "$x", one space, "?", one space, ":", one space, "$z". The difference is that in the latter, with the S code, those spaces are not "normal" spaces, but instead are non-breaking spaces. =back If a Pod processor sees any formatting code other than the ones listed above (as in "NE<lt>...>", or "QE<lt>...>", etc.), that processor must by default treat this as an error. A Pod parser may allow a way for particular applications to add to the above list of known formatting codes; a Pod parser might even allow a way to stipulate, for each additional command, whether it requires some form of special processing, as LE<lt>...> does. Future versions of this specification may add additional formatting codes. Historical note: A few older Pod processors would not see a ">" as closing a "CE<lt>" code, if the ">" was immediately preceded by a "-". This was so that this: C<$foo->bar> would parse as equivalent to this: C<$foo-E<gt>bar> instead of as equivalent to a "C" formatting code containing only "$foo-", and then a "bar>" outside the "C" formatting code. This problem has since been solved by the addition of syntaxes like this: C<< $foo->bar >> Compliant parsers must not treat "->" as special. Formatting codes absolutely cannot span paragraphs. If a code is opened in one paragraph, and no closing code is found by the end of that paragraph, the Pod parser must close that formatting code, and should complain (as in "Unterminated I code in the paragraph starting at line 123: 'Time objects are not...'"). So these two paragraphs: I<I told you not to do this! Don't make me say it again!> ...must I<not> be parsed as two paragraphs in italics (with the I code starting in one paragraph and starting in another.) Instead, the first paragraph should generate a warning, but that aside, the above code must parse as if it were: I<I told you not to do this!> Don't make me say it again!E<gt> (In SGMLish jargon, all Pod commands are like block-level elements, whereas all Pod formatting codes are like inline-level elements.) =head1 Notes on Implementing Pod Processors The following is a long section of miscellaneous requirements and suggestions to do with Pod processing. =over =item * Pod formatters should tolerate lines in verbatim blocks that are of any length, even if that means having to break them (possibly several times, for very long lines) to avoid text running off the side of the page. Pod formatters may warn of such line-breaking. Such warnings are particularly appropriate for lines are over 100 characters long, which are usually not intentional. =item * Pod parsers must recognize I<all> of the three well-known newline formats: CR, LF, and CRLF. See L<perlport|perlport>. =item * Pod parsers should accept input lines that are of any length. =item * Since Perl recognizes a Unicode Byte Order Mark at the start of files as signaling that the file is Unicode encoded as in UTF-16 (whether big-endian or little-endian) or UTF-8, Pod parsers should do the same. Otherwise, the character encoding should be understood as being UTF-8 if the first highbit byte sequence in the file seems valid as a UTF-8 sequence, or otherwise as CP-1252 (earlier versions of this specification used Latin-1 instead of CP-1252). Future versions of this specification may specify how Pod can accept other encodings. Presumably treatment of other encodings in Pod parsing would be as in XML parsing: whatever the encoding declared by a particular Pod file, content is to be stored in memory as Unicode characters. =item * The well known Unicode Byte Order Marks are as follows: if the file begins with the two literal byte values 0xFE 0xFF, this is the BOM for big-endian UTF-16. If the file begins with the two literal byte value 0xFF 0xFE, this is the BOM for little-endian UTF-16. On an ASCII platform, if the file begins with the three literal byte values 0xEF 0xBB 0xBF, this is the BOM for UTF-8. A mechanism portable to EBCDIC platforms is to: my $utf8_bom = "\x{FEFF}"; utf8::encode($utf8_bom); =for comment use bytes; print map sprintf(" 0x%02X", ord $_), split '', "\x{feff}"; 0xEF 0xBB 0xBF =for comment If toke.c is modified to support UTF-32, add mention of those here. =item * A naive, but often sufficient heuristic on ASCII platforms, for testing the first highbit byte-sequence in a BOM-less file (whether in code or in Pod!), to see whether that sequence is valid as UTF-8 (RFC 2279) is to check whether that the first byte in the sequence is in the range 0xC2 - 0xFD I<and> whether the next byte is in the range 0x80 - 0xBF. If so, the parser may conclude that this file is in UTF-8, and all highbit sequences in the file should be assumed to be UTF-8. Otherwise the parser should treat the file as being in CP-1252. (A better check, and which works on EBCDIC platforms as well, is to pass a copy of the sequence to L<utf8::decode()|utf8> which performs a full validity check on the sequence and returns TRUE if it is valid UTF-8, FALSE otherwise. This function is always pre-loaded, is fast because it is written in C, and will only get called at most once, so you don't need to avoid it out of performance concerns.) In the unlikely circumstance that the first highbit sequence in a truly non-UTF-8 file happens to appear to be UTF-8, one can cater to our heuristic (as well as any more intelligent heuristic) by prefacing that line with a comment line containing a highbit sequence that is clearly I<not> valid as UTF-8. A line consisting of simply "#", an e-acute, and any non-highbit byte, is sufficient to establish this file's encoding. =for comment If/WHEN some brave soul makes these heuristics into a generic text-file class (or PerlIO layer?), we can presumably delete mention of these icky details from this file, and can instead tell people to just use appropriate class/layer. Auto-recognition of newline sequences would be another desirable feature of such a class/layer. HINT HINT HINT. =for comment "The probability that a string of characters in any other encoding appears as valid UTF-8 is low" - RFC2279 =item * Pod processors must treat a "=for [label] [content...]" paragraph as meaning the same thing as a "=begin [label]" paragraph, content, and an "=end [label]" paragraph. (The parser may conflate these two constructs, or may leave them distinct, in the expectation that the formatter will nevertheless treat them the same.) =item * When rendering Pod to a format that allows comments (i.e., to nearly any format other than plaintext), a Pod formatter must insert comment text identifying its name and version number, and the name and version numbers of any modules it might be using to process the Pod. Minimal examples: %% POD::Pod2PS v3.14159, using POD::Parser v1.92 <!-- Pod::HTML v3.14159, using POD::Parser v1.92 --> {\doccomm generated by Pod::Tree::RTF 3.14159 using Pod::Tree 1.08} .\" Pod::Man version 3.14159, using POD::Parser version 1.92 Formatters may also insert additional comments, including: the release date of the Pod formatter program, the contact address for the author(s) of the formatter, the current time, the name of input file, the formatting options in effect, version of Perl used, etc. Formatters may also choose to note errors/warnings as comments, besides or instead of emitting them otherwise (as in messages to STDERR, or C<die>ing). =item * Pod parsers I<may> emit warnings or error messages ("Unknown E code EE<lt>zslig>!") to STDERR (whether through printing to STDERR, or C<warn>ing/C<carp>ing, or C<die>ing/C<croak>ing), but I<must> allow suppressing all such STDERR output, and instead allow an option for reporting errors/warnings in some other way, whether by triggering a callback, or noting errors in some attribute of the document object, or some similarly unobtrusive mechanism -- or even by appending a "Pod Errors" section to the end of the parsed form of the document. =item * In cases of exceptionally aberrant documents, Pod parsers may abort the parse. Even then, using C<die>ing/C<croak>ing is to be avoided; where possible, the parser library may simply close the input file and add text like "*** Formatting Aborted ***" to the end of the (partial) in-memory document. =item * In paragraphs where formatting codes (like EE<lt>...>, BE<lt>...>) are understood (i.e., I<not> verbatim paragraphs, but I<including> ordinary paragraphs, and command paragraphs that produce renderable text, like "=head1"), literal whitespace should generally be considered "insignificant", in that one literal space has the same meaning as any (nonzero) number of literal spaces, literal newlines, and literal tabs (as long as this produces no blank lines, since those would terminate the paragraph). Pod parsers should compact literal whitespace in each processed paragraph, but may provide an option for overriding this (since some processing tasks do not require it), or may follow additional special rules (for example, specially treating period-space-space or period-newline sequences). =item * Pod parsers should not, by default, try to coerce apostrophe (') and quote (") into smart quotes (little 9's, 66's, 99's, etc), nor try to turn backtick (`) into anything else but a single backtick character (distinct from an open quote character!), nor "--" into anything but two minus signs. They I<must never> do any of those things to text in CE<lt>...> formatting codes, and never I<ever> to text in verbatim paragraphs. =item * When rendering Pod to a format that has two kinds of hyphens (-), one that's a non-breaking hyphen, and another that's a breakable hyphen (as in "object-oriented", which can be split across lines as "object-", newline, "oriented"), formatters are encouraged to generally translate "-" to non-breaking hyphen, but may apply heuristics to convert some of these to breaking hyphens. =item * Pod formatters should make reasonable efforts to keep words of Perl code from being broken across lines. For example, "Foo::Bar" in some formatting systems is seen as eligible for being broken across lines as "Foo::" newline "Bar" or even "Foo::-" newline "Bar". This should be avoided where possible, either by disabling all line-breaking in mid-word, or by wrapping particular words with internal punctuation in "don't break this across lines" codes (which in some formats may not be a single code, but might be a matter of inserting non-breaking zero-width spaces between every pair of characters in a word.) =item * Pod parsers should, by default, expand tabs in verbatim paragraphs as they are processed, before passing them to the formatter or other processor. Parsers may also allow an option for overriding this. =item * Pod parsers should, by default, remove newlines from the end of ordinary and verbatim paragraphs before passing them to the formatter. For example, while the paragraph you're reading now could be considered, in Pod source, to end with (and contain) the newline(s) that end it, it should be processed as ending with (and containing) the period character that ends this sentence. =item * Pod parsers, when reporting errors, should make some effort to report an approximate line number ("Nested EE<lt>>'s in Paragraph #52, near line 633 of Thing/Foo.pm!"), instead of merely noting the paragraph number ("Nested EE<lt>>'s in Paragraph #52 of Thing/Foo.pm!"). Where this is problematic, the paragraph number should at least be accompanied by an excerpt from the paragraph ("Nested EE<lt>>'s in Paragraph #52 of Thing/Foo.pm, which begins 'Read/write accessor for the CE<lt>interest rate> attribute...'"). =item * Pod parsers, when processing a series of verbatim paragraphs one after another, should consider them to be one large verbatim paragraph that happens to contain blank lines. I.e., these two lines, which have a blank line between them: use Foo; print Foo->VERSION should be unified into one paragraph ("\tuse Foo;\n\n\tprint Foo->VERSION") before being passed to the formatter or other processor. Parsers may also allow an option for overriding this. While this might be too cumbersome to implement in event-based Pod parsers, it is straightforward for parsers that return parse trees. =item * Pod formatters, where feasible, are advised to avoid splitting short verbatim paragraphs (under twelve lines, say) across pages. =item * Pod parsers must treat a line with only spaces and/or tabs on it as a "blank line" such as separates paragraphs. (Some older parsers recognized only two adjacent newlines as a "blank line" but would not recognize a newline, a space, and a newline, as a blank line. This is noncompliant behavior.) =item * Authors of Pod formatters/processors should make every effort to avoid writing their own Pod parser. There are already several in CPAN, with a wide range of interface styles -- and one of them, Pod::Simple, comes with modern versions of Perl. =item * Characters in Pod documents may be conveyed either as literals, or by number in EE<lt>n> codes, or by an equivalent mnemonic, as in EE<lt>eacute> which is exactly equivalent to EE<lt>233>. The numbers are the Latin1/Unicode values, even on EBCDIC platforms. When referring to characters by using a EE<lt>n> numeric code, numbers in the range 32-126 refer to those well known US-ASCII characters (also defined there by Unicode, with the same meaning), which all Pod formatters must render faithfully. Characters whose EE<lt>E<gt> numbers are in the ranges 0-31 and 127-159 should not be used (neither as literals, nor as EE<lt>number> codes), except for the literal byte-sequences for newline (ASCII 13, ASCII 13 10, or ASCII 10), and tab (ASCII 9). Numbers in the range 160-255 refer to Latin-1 characters (also defined there by Unicode, with the same meaning). Numbers above 255 should be understood to refer to Unicode characters. =item * Be warned that some formatters cannot reliably render characters outside 32-126; and many are able to handle 32-126 and 160-255, but nothing above 255. =item * Besides the well-known "EE<lt>lt>" and "EE<lt>gt>" codes for less-than and greater-than, Pod parsers must understand "EE<lt>sol>" for "/" (solidus, slash), and "EE<lt>verbar>" for "|" (vertical bar, pipe). Pod parsers should also understand "EE<lt>lchevron>" and "EE<lt>rchevron>" as legacy codes for characters 171 and 187, i.e., "left-pointing double angle quotation mark" = "left pointing guillemet" and "right-pointing double angle quotation mark" = "right pointing guillemet". (These look like little "<<" and ">>", and they are now preferably expressed with the HTML/XHTML codes "EE<lt>laquo>" and "EE<lt>raquo>".) =item * Pod parsers should understand all "EE<lt>html>" codes as defined in the entity declarations in the most recent XHTML specification at C<www.W3.org>. Pod parsers must understand at least the entities that define characters in the range 160-255 (Latin-1). Pod parsers, when faced with some unknown "EE<lt>I<identifier>>" code, shouldn't simply replace it with nullstring (by default, at least), but may pass it through as a string consisting of the literal characters E, less-than, I<identifier>, greater-than. Or Pod parsers may offer the alternative option of processing such unknown "EE<lt>I<identifier>>" codes by firing an event especially for such codes, or by adding a special node-type to the in-memory document tree. Such "EE<lt>I<identifier>>" may have special meaning to some processors, or some processors may choose to add them to a special error report. =item * Pod parsers must also support the XHTML codes "EE<lt>quot>" for character 34 (doublequote, "), "EE<lt>amp>" for character 38 (ampersand, &), and "EE<lt>apos>" for character 39 (apostrophe, '). =item * Note that in all cases of "EE<lt>whateverE<gt>", I<whatever> (whether an htmlname, or a number in any base) must consist only of alphanumeric characters -- that is, I<whatever> must match C<m/\A\w+\z/>. So S<"EE<lt> 0 1 2 3 E<gt>"> is invalid, because it contains spaces, which aren't alphanumeric characters. This presumably does not I<need> special treatment by a Pod processor; S<" 0 1 2 3 "> doesn't look like a number in any base, so it would presumably be looked up in the table of HTML-like names. Since there isn't (and cannot be) an HTML-like entity called S<" 0 1 2 3 ">, this will be treated as an error. However, Pod processors may treat S<"EE<lt> 0 1 2 3 E<gt>"> or "EE<lt>e-acute>" as I<syntactically> invalid, potentially earning a different error message than the error message (or warning, or event) generated by a merely unknown (but theoretically valid) htmlname, as in "EE<lt>qacute>" [sic]. However, Pod parsers are not required to make this distinction. =item * Note that EE<lt>number> I<must not> be interpreted as simply "codepoint I<number> in the current/native character set". It always means only "the character represented by codepoint I<number> in Unicode." (This is identical to the semantics of &#I<number>; in XML.) This will likely require many formatters to have tables mapping from treatable Unicode codepoints (such as the "\xE9" for the e-acute character) to the escape sequences or codes necessary for conveying such sequences in the target output format. A converter to *roff would, for example know that "\xE9" (whether conveyed literally, or via a EE<lt>...> sequence) is to be conveyed as "e\\*'". Similarly, a program rendering Pod in a Mac OS application window, would presumably need to know that "\xE9" maps to codepoint 142 in MacRoman encoding that (at time of writing) is native for Mac OS. Such Unicode2whatever mappings are presumably already widely available for common output formats. (Such mappings may be incomplete! Implementers are not expected to bend over backwards in an attempt to render Cherokee syllabics, Etruscan runes, Byzantine musical symbols, or any of the other weird things that Unicode can encode.) And if a Pod document uses a character not found in such a mapping, the formatter should consider it an unrenderable character. =item * If, surprisingly, the implementor of a Pod formatter can't find a satisfactory pre-existing table mapping from Unicode characters to escapes in the target format (e.g., a decent table of Unicode characters to *roff escapes), it will be necessary to build such a table. If you are in this circumstance, you should begin with the characters in the range 0x00A0 - 0x00FF, which is mostly the heavily used accented characters. Then proceed (as patience permits and fastidiousness compels) through the characters that the (X)HTML standards groups judged important enough to merit mnemonics for. These are declared in the (X)HTML specifications at the www.W3.org site. At time of writing (September 2001), the most recent entity declaration files are: http://www.w3.org/TR/xhtml1/DTD/xhtml-lat1.ent http://www.w3.org/TR/xhtml1/DTD/xhtml-special.ent http://www.w3.org/TR/xhtml1/DTD/xhtml-symbol.ent Then you can progress through any remaining notable Unicode characters in the range 0x2000-0x204D (consult the character tables at www.unicode.org), and whatever else strikes your fancy. For example, in F<xhtml-symbol.ent>, there is the entry: <!ENTITY infin "∞"> <!-- infinity, U+221E ISOtech --> While the mapping "infin" to the character "\x{221E}" will (hopefully) have been already handled by the Pod parser, the presence of the character in this file means that it's reasonably important enough to include in a formatter's table that maps from notable Unicode characters to the codes necessary for rendering them. So for a Unicode-to-*roff mapping, for example, this would merit the entry: "\x{221E}" => '\(in', It is eagerly hoped that in the future, increasing numbers of formats (and formatters) will support Unicode characters directly (as (X)HTML does with C<∞>, C<∞>, or C<∞>), reducing the need for idiosyncratic mappings of Unicode-to-I<my_escapes>. =item * It is up to individual Pod formatter to display good judgement when confronted with an unrenderable character (which is distinct from an unknown EE<lt>thing> sequence that the parser couldn't resolve to anything, renderable or not). It is good practice to map Latin letters with diacritics (like "EE<lt>eacute>"/"EE<lt>233>") to the corresponding unaccented US-ASCII letters (like a simple character 101, "e"), but clearly this is often not feasible, and an unrenderable character may be represented as "?", or the like. In attempting a sane fallback (as from EE<lt>233> to "e"), Pod formatters may use the %Latin1Code_to_fallback table in L<Pod::Escapes|Pod::Escapes>, or L<Text::Unidecode|Text::Unidecode>, if available. For example, this Pod text: magic is enabled if you set C<$Currency> to 'E<euro>'. may be rendered as: "magic is enabled if you set C<$Currency> to 'I<?>'" or as "magic is enabled if you set C<$Currency> to 'B<[euro]>'", or as "magic is enabled if you set C<$Currency> to '[x20AC]', etc. A Pod formatter may also note, in a comment or warning, a list of what unrenderable characters were encountered. =item * EE<lt>...> may freely appear in any formatting code (other than in another EE<lt>...> or in an ZE<lt>>). That is, "XE<lt>The EE<lt>euro>1,000,000 Solution>" is valid, as is "LE<lt>The EE<lt>euro>1,000,000 Solution|Million::Euros>". =item * Some Pod formatters output to formats that implement non-breaking spaces as an individual character (which I'll call "NBSP"), and others output to formats that implement non-breaking spaces just as spaces wrapped in a "don't break this across lines" code. Note that at the level of Pod, both sorts of codes can occur: Pod can contain a NBSP character (whether as a literal, or as a "EE<lt>160>" or "EE<lt>nbsp>" code); and Pod can contain "SE<lt>foo IE<lt>barE<gt> baz>" codes, where "mere spaces" (character 32) in such codes are taken to represent non-breaking spaces. Pod parsers should consider supporting the optional parsing of "SE<lt>foo IE<lt>barE<gt> baz>" as if it were "fooI<NBSP>IE<lt>barE<gt>I<NBSP>baz", and, going the other way, the optional parsing of groups of words joined by NBSP's as if each group were in a SE<lt>...> code, so that formatters may use the representation that maps best to what the output format demands. =item * Some processors may find that the C<SE<lt>...E<gt>> code is easiest to implement by replacing each space in the parse tree under the content of the S, with an NBSP. But note: the replacement should apply I<not> to spaces in I<all> text, but I<only> to spaces in I<printable> text. (This distinction may or may not be evident in the particular tree/event model implemented by the Pod parser.) For example, consider this unusual case: S<L</Autoloaded Functions>> This means that the space in the middle of the visible link text must not be broken across lines. In other words, it's the same as this: L<"AutoloadedE<160>Functions"/Autoloaded Functions> However, a misapplied space-to-NBSP replacement could (wrongly) produce something equivalent to this: L<"AutoloadedE<160>Functions"/AutoloadedE<160>Functions> ...which is almost definitely not going to work as a hyperlink (assuming this formatter outputs a format supporting hypertext). Formatters may choose to just not support the S format code, especially in cases where the output format simply has no NBSP character/code and no code for "don't break this stuff across lines". =item * Besides the NBSP character discussed above, implementors are reminded of the existence of the other "special" character in Latin-1, the "soft hyphen" character, also known as "discretionary hyphen", i.e. C<EE<lt>173E<gt>> = C<EE<lt>0xADE<gt>> = C<EE<lt>shyE<gt>>). This character expresses an optional hyphenation point. That is, it normally renders as nothing, but may render as a "-" if a formatter breaks the word at that point. Pod formatters should, as appropriate, do one of the following: 1) render this with a code with the same meaning (e.g., "\-" in RTF), 2) pass it through in the expectation that the formatter understands this character as such, or 3) delete it. For example: sigE<shy>action manuE<shy>script JarkE<shy>ko HieE<shy>taE<shy>nieE<shy>mi These signal to a formatter that if it is to hyphenate "sigaction" or "manuscript", then it should be done as "sig-I<[linebreak]>action" or "manu-I<[linebreak]>script" (and if it doesn't hyphenate it, then the C<EE<lt>shyE<gt>> doesn't show up at all). And if it is to hyphenate "Jarkko" and/or "Hietaniemi", it can do so only at the points where there is a C<EE<lt>shyE<gt>> code. In practice, it is anticipated that this character will not be used often, but formatters should either support it, or delete it. =item * If you think that you want to add a new command to Pod (like, say, a "=biblio" command), consider whether you could get the same effect with a for or begin/end sequence: "=for biblio ..." or "=begin biblio" ... "=end biblio". Pod processors that don't understand "=for biblio", etc, will simply ignore it, whereas they may complain loudly if they see "=biblio". =item * Throughout this document, "Pod" has been the preferred spelling for the name of the documentation format. One may also use "POD" or "pod". For the documentation that is (typically) in the Pod format, you may use "pod", or "Pod", or "POD". Understanding these distinctions is useful; but obsessing over how to spell them, usually is not. =back =head1 About LE<lt>...E<gt> Codes As you can tell from a glance at L<perlpod|perlpod>, the LE<lt>...> code is the most complex of the Pod formatting codes. The points below will hopefully clarify what it means and how processors should deal with it. =over =item * In parsing an LE<lt>...> code, Pod parsers must distinguish at least four attributes: =over =item First: The link-text. If there is none, this must be C<undef>. (E.g., in "LE<lt>Perl Functions|perlfunc>", the link-text is "Perl Functions". In "LE<lt>Time::HiRes>" and even "LE<lt>|Time::HiRes>", there is no link text. Note that link text may contain formatting.) =item Second: The possibly inferred link-text; i.e., if there was no real link text, then this is the text that we'll infer in its place. (E.g., for "LE<lt>Getopt::Std>", the inferred link text is "Getopt::Std".) =item Third: The name or URL, or C<undef> if none. (E.g., in "LE<lt>Perl Functions|perlfunc>", the name (also sometimes called the page) is "perlfunc". In "LE<lt>/CAVEATS>", the name is C<undef>.) =item Fourth: The section (AKA "item" in older perlpods), or C<undef> if none. E.g., in "LE<lt>Getopt::Std/DESCRIPTIONE<gt>", "DESCRIPTION" is the section. (Note that this is not the same as a manpage section like the "5" in "man 5 crontab". "Section Foo" in the Pod sense means the part of the text that's introduced by the heading or item whose text is "Foo".) =back Pod parsers may also note additional attributes including: =over =item Fifth: A flag for whether item 3 (if present) is a URL (like "http://lists.perl.org" is), in which case there should be no section attribute; a Pod name (like "perldoc" and "Getopt::Std" are); or possibly a man page name (like "crontab(5)" is). =item Sixth: The raw original LE<lt>...> content, before text is split on "|", "/", etc, and before EE<lt>...> codes are expanded. =back (The above were numbered only for concise reference below. It is not a requirement that these be passed as an actual list or array.) For example: L<Foo::Bar> => undef, # link text "Foo::Bar", # possibly inferred link text "Foo::Bar", # name undef, # section 'pod', # what sort of link "Foo::Bar" # original content L<Perlport's section on NL's|perlport/Newlines> => "Perlport's section on NL's", # link text "Perlport's section on NL's", # possibly inferred link text "perlport", # name "Newlines", # section 'pod', # what sort of link "Perlport's section on NL's|perlport/Newlines" # original content L<perlport/Newlines> => undef, # link text '"Newlines" in perlport', # possibly inferred link text "perlport", # name "Newlines", # section 'pod', # what sort of link "perlport/Newlines" # original content L<crontab(5)/"DESCRIPTION"> => undef, # link text '"DESCRIPTION" in crontab(5)', # possibly inferred link text "crontab(5)", # name "DESCRIPTION", # section 'man', # what sort of link 'crontab(5)/"DESCRIPTION"' # original content L</Object Attributes> => undef, # link text '"Object Attributes"', # possibly inferred link text undef, # name "Object Attributes", # section 'pod', # what sort of link "/Object Attributes" # original content L<https://www.perl.org/> => undef, # link text "https://www.perl.org/", # possibly inferred link text "https://www.perl.org/", # name undef, # section 'url', # what sort of link "https://www.perl.org/" # original content L<Perl.org|https://www.perl.org/> => "Perl.org", # link text "https://www.perl.org/", # possibly inferred link text "https://www.perl.org/", # name undef, # section 'url', # what sort of link "Perl.org|https://www.perl.org/" # original content Note that you can distinguish URL-links from anything else by the fact that they match C<m/\A\w+:[^:\s]\S*\z/>. So C<LE<lt>http://www.perl.comE<gt>> is a URL, but C<LE<lt>HTTP::ResponseE<gt>> isn't. =item * In case of LE<lt>...> codes with no "text|" part in them, older formatters have exhibited great variation in actually displaying the link or cross reference. For example, LE<lt>crontab(5)> would render as "the C<crontab(5)> manpage", or "in the C<crontab(5)> manpage" or just "C<crontab(5)>". Pod processors must now treat "text|"-less links as follows: L<name> => L<name|name> L</section> => L<"section"|/section> L<name/section> => L<"section" in name|name/section> =item * Note that section names might contain markup. I.e., if a section starts with: =head2 About the C<-M> Operator or with: =item About the C<-M> Operator then a link to it would look like this: L<somedoc/About the C<-M> Operator> Formatters may choose to ignore the markup for purposes of resolving the link and use only the renderable characters in the section name, as in: <h1><a name="About_the_-M_Operator">About the <code>-M</code> Operator</h1> ... <a href="somedoc#About_the_-M_Operator">About the <code>-M</code> Operator" in somedoc</a> =item * Previous versions of perlpod distinguished C<LE<lt>name/"section"E<gt>> links from C<LE<lt>name/itemE<gt>> links (and their targets). These have been merged syntactically and semantically in the current specification, and I<section> can refer either to a "=headI<n> Heading Content" command or to a "=item Item Content" command. This specification does not specify what behavior should be in the case of a given document having several things all seeming to produce the same I<section> identifier (e.g., in HTML, several things all producing the same I<anchorname> in <a name="I<anchorname>">...</a> elements). Where Pod processors can control this behavior, they should use the first such anchor. That is, C<LE<lt>Foo/BarE<gt>> refers to the I<first> "Bar" section in Foo. But for some processors/formats this cannot be easily controlled; as with the HTML example, the behavior of multiple ambiguous <a name="I<anchorname>">...</a> is most easily just left up to browsers to decide. =item * In a C<LE<lt>text|...E<gt>> code, text may contain formatting codes for formatting or for EE<lt>...> escapes, as in: L<B<ummE<234>stuff>|...> For C<LE<lt>...E<gt>> codes without a "name|" part, only C<EE<lt>...E<gt>> and C<ZE<lt>E<gt>> codes may occur. That is, authors should not use "C<LE<lt>BE<lt>Foo::BarE<gt>E<gt>>". Note, however, that formatting codes and ZE<lt>>'s can occur in any and all parts of an LE<lt>...> (i.e., in I<name>, I<section>, I<text>, and I<url>). Authors must not nest LE<lt>...> codes. For example, "LE<lt>The LE<lt>Foo::Bar> man page>" should be treated as an error. =item * Note that Pod authors may use formatting codes inside the "text" part of "LE<lt>text|name>" (and so on for LE<lt>text|/"sec">). In other words, this is valid: Go read L<the docs on C<$.>|perlvar/"$."> Some output formats that do allow rendering "LE<lt>...>" codes as hypertext, might not allow the link-text to be formatted; in that case, formatters will have to just ignore that formatting. =item * At time of writing, C<LE<lt>nameE<gt>> values are of two types: either the name of a Pod page like C<LE<lt>Foo::BarE<gt>> (which might be a real Perl module or program in an @INC / PATH directory, or a .pod file in those places); or the name of a Unix man page, like C<LE<lt>crontab(5)E<gt>>. In theory, C<LE<lt>chmodE<gt>> is ambiguous between a Pod page called "chmod", or the Unix man page "chmod" (in whatever man-section). However, the presence of a string in parens, as in "crontab(5)", is sufficient to signal that what is being discussed is not a Pod page, and so is presumably a Unix man page. The distinction is of no importance to many Pod processors, but some processors that render to hypertext formats may need to distinguish them in order to know how to render a given C<LE<lt>fooE<gt>> code. =item * Previous versions of perlpod allowed for a C<LE<lt>sectionE<gt>> syntax (as in C<LE<lt>Object AttributesE<gt>>), which was not easily distinguishable from C<LE<lt>nameE<gt>> syntax and for C<LE<lt>"section"E<gt>> which was only slightly less ambiguous. This syntax is no longer in the specification, and has been replaced by the C<LE<lt>/sectionE<gt>> syntax (where the slash was formerly optional). Pod parsers should tolerate the C<LE<lt>"section"E<gt>> syntax, for a while at least. The suggested heuristic for distinguishing C<LE<lt>sectionE<gt>> from C<LE<lt>nameE<gt>> is that if it contains any whitespace, it's a I<section>. Pod processors should warn about this being deprecated syntax. =back =head1 About =over...=back Regions "=over"..."=back" regions are used for various kinds of list-like structures. (I use the term "region" here simply as a collective term for everything from the "=over" to the matching "=back".) =over =item * The non-zero numeric I<indentlevel> in "=over I<indentlevel>" ... "=back" is used for giving the formatter a clue as to how many "spaces" (ems, or roughly equivalent units) it should tab over, although many formatters will have to convert this to an absolute measurement that may not exactly match with the size of spaces (or M's) in the document's base font. Other formatters may have to completely ignore the number. The lack of any explicit I<indentlevel> parameter is equivalent to an I<indentlevel> value of 4. Pod processors may complain if I<indentlevel> is present but is not a positive number matching C<m/\A(\d*\.)?\d+\z/>. =item * Authors of Pod formatters are reminded that "=over" ... "=back" may map to several different constructs in your output format. For example, in converting Pod to (X)HTML, it can map to any of <ul>...</ul>, <ol>...</ol>, <dl>...</dl>, or <blockquote>...</blockquote>. Similarly, "=item" can map to <li> or <dt>. =item * Each "=over" ... "=back" region should be one of the following: =over =item * An "=over" ... "=back" region containing only "=item *" commands, each followed by some number of ordinary/verbatim paragraphs, other nested "=over" ... "=back" regions, "=for..." paragraphs, and "=begin"..."=end" regions. (Pod processors must tolerate a bare "=item" as if it were "=item *".) Whether "*" is rendered as a literal asterisk, an "o", or as some kind of real bullet character, is left up to the Pod formatter, and may depend on the level of nesting. =item * An "=over" ... "=back" region containing only C<m/\A=item\s+\d+\.?\s*\z/> paragraphs, each one (or each group of them) followed by some number of ordinary/verbatim paragraphs, other nested "=over" ... "=back" regions, "=for..." paragraphs, and/or "=begin"..."=end" codes. Note that the numbers must start at 1 in each section, and must proceed in order and without skipping numbers. (Pod processors must tolerate lines like "=item 1" as if they were "=item 1.", with the period.) =item * An "=over" ... "=back" region containing only "=item [text]" commands, each one (or each group of them) followed by some number of ordinary/verbatim paragraphs, other nested "=over" ... "=back" regions, or "=for..." paragraphs, and "=begin"..."=end" regions. The "=item [text]" paragraph should not match C<m/\A=item\s+\d+\.?\s*\z/> or C<m/\A=item\s+\*\s*\z/>, nor should it match just C<m/\A=item\s*\z/>. =item * An "=over" ... "=back" region containing no "=item" paragraphs at all, and containing only some number of ordinary/verbatim paragraphs, and possibly also some nested "=over" ... "=back" regions, "=for..." paragraphs, and "=begin"..."=end" regions. Such an itemless "=over" ... "=back" region in Pod is equivalent in meaning to a "<blockquote>...</blockquote>" element in HTML. =back Note that with all the above cases, you can determine which type of "=over" ... "=back" you have, by examining the first (non-"=cut", non-"=pod") Pod paragraph after the "=over" command. =item * Pod formatters I<must> tolerate arbitrarily large amounts of text in the "=item I<text...>" paragraph. In practice, most such paragraphs are short, as in: =item For cutting off our trade with all parts of the world But they may be arbitrarily long: =item For transporting us beyond seas to be tried for pretended offenses =item He is at this time transporting large armies of foreign mercenaries to complete the works of death, desolation and tyranny, already begun with circumstances of cruelty and perfidy scarcely paralleled in the most barbarous ages, and totally unworthy the head of a civilized nation. =item * Pod processors should tolerate "=item *" / "=item I<number>" commands with no accompanying paragraph. The middle item is an example: =over =item 1 Pick up dry cleaning. =item 2 =item 3 Stop by the store. Get Abba Zabas, Stoli, and cheap lawn chairs. =back =item * No "=over" ... "=back" region can contain headings. Processors may treat such a heading as an error. =item * Note that an "=over" ... "=back" region should have some content. That is, authors should not have an empty region like this: =over =back Pod processors seeing such a contentless "=over" ... "=back" region, may ignore it, or may report it as an error. =item * Processors must tolerate an "=over" list that goes off the end of the document (i.e., which has no matching "=back"), but they may warn about such a list. =item * Authors of Pod formatters should note that this construct: =item Neque =item Porro =item Quisquam Est Qui dolorem ipsum quia dolor sit amet, consectetur, adipisci velit, sed quia non numquam eius modi tempora incidunt ut labore et dolore magnam aliquam quaerat voluptatem. =item Ut Enim is semantically ambiguous, in a way that makes formatting decisions a bit difficult. On the one hand, it could be mention of an item "Neque", mention of another item "Porro", and mention of another item "Quisquam Est", with just the last one requiring the explanatory paragraph "Qui dolorem ipsum quia dolor..."; and then an item "Ut Enim". In that case, you'd want to format it like so: Neque Porro Quisquam Est Qui dolorem ipsum quia dolor sit amet, consectetur, adipisci velit, sed quia non numquam eius modi tempora incidunt ut labore et dolore magnam aliquam quaerat voluptatem. Ut Enim But it could equally well be a discussion of three (related or equivalent) items, "Neque", "Porro", and "Quisquam Est", followed by a paragraph explaining them all, and then a new item "Ut Enim". In that case, you'd probably want to format it like so: Neque Porro Quisquam Est Qui dolorem ipsum quia dolor sit amet, consectetur, adipisci velit, sed quia non numquam eius modi tempora incidunt ut labore et dolore magnam aliquam quaerat voluptatem. Ut Enim But (for the foreseeable future), Pod does not provide any way for Pod authors to distinguish which grouping is meant by the above "=item"-cluster structure. So formatters should format it like so: Neque Porro Quisquam Est Qui dolorem ipsum quia dolor sit amet, consectetur, adipisci velit, sed quia non numquam eius modi tempora incidunt ut labore et dolore magnam aliquam quaerat voluptatem. Ut Enim That is, there should be (at least roughly) equal spacing between items as between paragraphs (although that spacing may well be less than the full height of a line of text). This leaves it to the reader to use (con)textual cues to figure out whether the "Qui dolorem ipsum..." paragraph applies to the "Quisquam Est" item or to all three items "Neque", "Porro", and "Quisquam Est". While not an ideal situation, this is preferable to providing formatting cues that may be actually contrary to the author's intent. =back =head1 About Data Paragraphs and "=begin/=end" Regions Data paragraphs are typically used for inlining non-Pod data that is to be used (typically passed through) when rendering the document to a specific format: =begin rtf \par{\pard\qr\sa4500{\i Printed\~\chdate\~\chtime}\par} =end rtf The exact same effect could, incidentally, be achieved with a single "=for" paragraph: =for rtf \par{\pard\qr\sa4500{\i Printed\~\chdate\~\chtime}\par} (Although that is not formally a data paragraph, it has the same meaning as one, and Pod parsers may parse it as one.) Another example of a data paragraph: =begin html I like <em>PIE</em>! <hr>Especially pecan pie! =end html If these were ordinary paragraphs, the Pod parser would try to expand the "EE<lt>/em>" (in the first paragraph) as a formatting code, just like "EE<lt>lt>" or "EE<lt>eacute>". But since this is in a "=begin I<identifier>"..."=end I<identifier>" region I<and> the identifier "html" doesn't begin have a ":" prefix, the contents of this region are stored as data paragraphs, instead of being processed as ordinary paragraphs (or if they began with a spaces and/or tabs, as verbatim paragraphs). As a further example: At time of writing, no "biblio" identifier is supported, but suppose some processor were written to recognize it as a way of (say) denoting a bibliographic reference (necessarily containing formatting codes in ordinary paragraphs). The fact that "biblio" paragraphs were meant for ordinary processing would be indicated by prefacing each "biblio" identifier with a colon: =begin :biblio Wirth, Niklaus. 1976. I<Algorithms + Data Structures = Programs.> Prentice-Hall, Englewood Cliffs, NJ. =end :biblio This would signal to the parser that paragraphs in this begin...end region are subject to normal handling as ordinary/verbatim paragraphs (while still tagged as meant only for processors that understand the "biblio" identifier). The same effect could be had with: =for :biblio Wirth, Niklaus. 1976. I<Algorithms + Data Structures = Programs.> Prentice-Hall, Englewood Cliffs, NJ. The ":" on these identifiers means simply "process this stuff normally, even though the result will be for some special target". I suggest that parser APIs report "biblio" as the target identifier, but also report that it had a ":" prefix. (And similarly, with the above "html", report "html" as the target identifier, and note the I<lack> of a ":" prefix.) Note that a "=begin I<identifier>"..."=end I<identifier>" region where I<identifier> begins with a colon, I<can> contain commands. For example: =begin :biblio Wirth's classic is available in several editions, including: =for comment hm, check abebooks.com for how much used copies cost. =over =item Wirth, Niklaus. 1975. I<Algorithmen und Datenstrukturen.> Teubner, Stuttgart. [Yes, it's in German.] =item Wirth, Niklaus. 1976. I<Algorithms + Data Structures = Programs.> Prentice-Hall, Englewood Cliffs, NJ. =back =end :biblio Note, however, a "=begin I<identifier>"..."=end I<identifier>" region where I<identifier> does I<not> begin with a colon, should not directly contain "=head1" ... "=head4" commands, nor "=over", nor "=back", nor "=item". For example, this may be considered invalid: =begin somedata This is a data paragraph. =head1 Don't do this! This is a data paragraph too. =end somedata A Pod processor may signal that the above (specifically the "=head1" paragraph) is an error. Note, however, that the following should I<not> be treated as an error: =begin somedata This is a data paragraph. =cut # Yup, this isn't Pod anymore. sub excl { (rand() > .5) ? "hoo!" : "hah!" } =pod This is a data paragraph too. =end somedata And this too is valid: =begin someformat This is a data paragraph. And this is a data paragraph. =begin someotherformat This is a data paragraph too. And this is a data paragraph too. =begin :yetanotherformat =head2 This is a command paragraph! This is an ordinary paragraph! And this is a verbatim paragraph! =end :yetanotherformat =end someotherformat Another data paragraph! =end someformat The contents of the above "=begin :yetanotherformat" ... "=end :yetanotherformat" region I<aren't> data paragraphs, because the immediately containing region's identifier (":yetanotherformat") begins with a colon. In practice, most regions that contain data paragraphs will contain I<only> data paragraphs; however, the above nesting is syntactically valid as Pod, even if it is rare. However, the handlers for some formats, like "html", will accept only data paragraphs, not nested regions; and they may complain if they see (targeted for them) nested regions, or commands, other than "=end", "=pod", and "=cut". Also consider this valid structure: =begin :biblio Wirth's classic is available in several editions, including: =over =item Wirth, Niklaus. 1975. I<Algorithmen und Datenstrukturen.> Teubner, Stuttgart. [Yes, it's in German.] =item Wirth, Niklaus. 1976. I<Algorithms + Data Structures = Programs.> Prentice-Hall, Englewood Cliffs, NJ. =back Buy buy buy! =begin html <img src='wirth_spokesmodeling_book.png'> <hr> =end html Now now now! =end :biblio There, the "=begin html"..."=end html" region is nested inside the larger "=begin :biblio"..."=end :biblio" region. Note that the content of the "=begin html"..."=end html" region is data paragraph(s), because the immediately containing region's identifier ("html") I<doesn't> begin with a colon. Pod parsers, when processing a series of data paragraphs one after another (within a single region), should consider them to be one large data paragraph that happens to contain blank lines. So the content of the above "=begin html"..."=end html" I<may> be stored as two data paragraphs (one consisting of "<img src='wirth_spokesmodeling_book.png'>\n" and another consisting of "<hr>\n"), but I<should> be stored as a single data paragraph (consisting of "<img src='wirth_spokesmodeling_book.png'>\n\n<hr>\n"). Pod processors should tolerate empty "=begin I<something>"..."=end I<something>" regions, empty "=begin :I<something>"..."=end :I<something>" regions, and contentless "=for I<something>" and "=for :I<something>" paragraphs. I.e., these should be tolerated: =for html =begin html =end html =begin :biblio =end :biblio Incidentally, note that there's no easy way to express a data paragraph starting with something that looks like a command. Consider: =begin stuff =shazbot =end stuff There, "=shazbot" will be parsed as a Pod command "shazbot", not as a data paragraph "=shazbot\n". However, you can express a data paragraph consisting of "=shazbot\n" using this code: =for stuff =shazbot The situation where this is necessary, is presumably quite rare. Note that =end commands must match the currently open =begin command. That is, they must properly nest. For example, this is valid: =begin outer X =begin inner Y =end inner Z =end outer while this is invalid: =begin outer X =begin inner Y =end outer Z =end inner This latter is improper because when the "=end outer" command is seen, the currently open region has the formatname "inner", not "outer". (It just happens that "outer" is the format name of a higher-up region.) This is an error. Processors must by default report this as an error, and may halt processing the document containing that error. A corollary of this is that regions cannot "overlap". That is, the latter block above does not represent a region called "outer" which contains X and Y, overlapping a region called "inner" which contains Y and Z. But because it is invalid (as all apparently overlapping regions would be), it doesn't represent that, or anything at all. Similarly, this is invalid: =begin thing =end hting This is an error because the region is opened by "thing", and the "=end" tries to close "hting" [sic]. This is also invalid: =begin thing =end This is invalid because every "=end" command must have a formatname parameter. =head1 SEE ALSO L<perlpod>, L<perlsyn/"PODs: Embedded Documentation">, L<podchecker> =head1 AUTHOR Sean M. Burke =cut perl589delta.pod 0000644 00000151220 15125556335 0007505 0 ustar 00 =head1 NAME perl589delta - what is new for perl v5.8.9 =head1 DESCRIPTION This document describes differences between the 5.8.8 release and the 5.8.9 release. =head1 Notice The 5.8.9 release will be the last significant release of the 5.8.x series. Any future releases of 5.8.x will likely only be to deal with security issues, and platform build failures. Hence you should look to migrating to 5.10.x, if you have not started already. See L</"Known Problems"> for more information. =head1 Incompatible Changes A particular construction in the source code of extensions written in C++ may need changing. See L</"Changed Internals"> for more details. All extensions written in C, most written in C++, and all existing compiled extensions are unaffected. This was necessary to improve C++ support. Other than this, there are no changes intentionally incompatible with 5.8.8. If any exist, they are bugs and reports are welcome. =head1 Core Enhancements =head2 Unicode Character Database 5.1.0. The copy of the Unicode Character Database included in Perl 5.8 has been updated to 5.1.0 from 4.1.0. See L<http://www.unicode.org/versions/Unicode5.1.0/#NotableChanges> for the notable changes. =head2 stat and -X on directory handles It is now possible to call C<stat> and the C<-X> filestat operators on directory handles. As both directory and file handles are barewords, there can be ambiguities over which was intended. In these situations the file handle semantics are preferred. Both also treat C<*FILE{IO}> filehandles like C<*FILE> filehandles. =head2 Source filters in @INC It's possible to enhance the mechanism of subroutine hooks in @INC by adding a source filter on top of the filehandle opened and returned by the hook. This feature was planned a long time ago, but wasn't quite working until now. See L<perlfunc/require> for details. (Nicholas Clark) =head2 Exceptions in constant folding The constant folding routine is now wrapped in an exception handler, and if folding throws an exception (such as attempting to evaluate 0/0), perl now retains the current optree, rather than aborting the whole program. Without this change, programs would not compile if they had expressions that happened to generate exceptions, even though those expressions were in code that could never be reached at runtime. (Nicholas Clark, Dave Mitchell) =head2 C<no VERSION> You can now use C<no> followed by a version number to specify that you want to use a version of perl older than the specified one. =head2 Improved internal UTF-8 caching code The code that caches calculated UTF-8 byte offsets for character offsets for a string has been re-written. Several bugs have been located and eliminated, and the code now makes better use of the information it has, so should be faster. In particular, it doesn't scan to the end of a string before calculating an offset within the string, which should speed up some operations on long strings. It is now possible to disable the caching code at run time, to verify that it is not the cause of suspected problems. =head2 Runtime relocatable installations There is now F<Configure> support for creating a perl tree that is relocatable at run time. see L</Relocatable installations>. =head2 New internal variables =over 4 =item C<${^CHILD_ERROR_NATIVE}> This variable gives the native status returned by the last pipe close, backtick command, successful call to C<wait> or C<waitpid>, or from the C<system> operator. See L<perlvar> for details. (Contributed by Gisle Aas.) =item C<${^UTF8CACHE}> This variable controls the state of the internal UTF-8 offset caching code. 1 for on (the default), 0 for off, -1 to debug the caching code by checking all its results against linear scans, and panicking on any discrepancy. =back =head2 C<readpipe> is now overridable The built-in function C<readpipe> is now overridable. Overriding it permits also to override its operator counterpart, C<qx//> (also known as C<``>). =head2 simple exception handling macros Perl 5.8.9 (and 5.10.0 onwards) now provides a couple of macros to do very basic exception handling in XS modules. You can use these macros if you call code that may C<croak>, but you need to do some cleanup before giving control back to Perl. See L<perlguts/Exception Handling> for more details. =head2 -D option enhancements =over =item * C<-Dq> suppresses the I<EXECUTING...> message when running under C<-D> =item * C<-Dl> logs runops loop entry and exit, and jump level popping. =item * C<-Dv> displays the process id as part of the trace output. =back =head2 XS-assisted SWASHGET Some pure-perl code that the regexp engine was using to retrieve Unicode properties and transliteration mappings has been reimplemented in XS for faster execution. (SADAHIRO Tomoyuki) =head2 Constant subroutines The interpreter internals now support a far more memory efficient form of inlineable constants. Storing a reference to a constant value in a symbol table is equivalent to a full typeglob referencing a constant subroutine, but using about 400 bytes less memory. This proxy constant subroutine is automatically upgraded to a real typeglob with subroutine if necessary. The approach taken is analogous to the existing space optimisation for subroutine stub declarations, which are stored as plain scalars in place of the full typeglob. However, to aid backwards compatibility of existing code, which (wrongly) does not expect anything other than typeglobs in symbol tables, nothing in core uses this feature, other than the regression tests. Stubs for prototyped subroutines have been stored in symbol tables as plain strings, and stubs for unprototyped subroutines as the number -1, since 5.005, so code which assumes that the core only places typeglobs in symbol tables has been making incorrect assumptions for over 10 years. =head1 New Platforms Compile support added for: =over =item * DragonFlyBSD =item * MidnightBSD =item * MirOS BSD =item * RISC OS =item * Cray XT4/Catamount =back =head1 Modules and Pragmata =head2 New Modules =over =item * C<Module::Pluggable> is a simple framework to create modules that accept pluggable sub-modules. The bundled version is 3.8 =item * C<Module::CoreList> is a hash of hashes that is keyed on perl version as indicated in C<$]>. The bundled version is 2.17 =item * C<Win32API::File> now available in core on Microsoft Windows. The bundled version is 0.1001_01 =item * C<Devel::InnerPackage> finds all the packages defined by a single file. It is part of the C<Module::Pluggable> distribution. The bundled version is 0.3 =back =head2 Updated Modules =over =item * C<attributes> upgraded to version 0.09 =item * C<AutoLoader> upgraded to version 5.67 =item * C<AutoSplit> upgraded to 1.06 =item * C<autouse> upgraded to version 1.06 =item * C<B> upgraded from 1.09_01 to 1.19 =over =item * provides new pad related abstraction macros C<B::NV::COP_SEQ_RANGE_LOW>, C<B::NV::COP_SEQ_RANGE_HIGH>, C<B::NV::PARENT_PAD_INDEX>, C<B::NV::PARENT_FAKELEX_FLAGS>, which hides the difference in storage in 5.10.0 and later. =item * provides C<B::sub_generation>, which exposes C<PL_sub_generation> =item * provides C<B::GV::isGV_with_GP>, which on pre-5.10 perls always returns true. =item * New type C<B::HE> added with methods C<VAL>, C<HASH> and C<SVKEY_force> =item * The C<B::GVf_IMPORTED_CV> flag is now set correctly when a proxy constant subroutine is imported. =item * bugs fixed in the handling of C<PMOP>s. =item * C<B::BM::PREVIOUS> returns now C<U32>, not C<U16>. C<B::CV::START> and C<B:CV::ROOT> return now C<NULL> on an XSUB, C<B::CV::XSUB> and C<B::CV::XSUBANY> return 0 on a non-XSUB. =back =item * C<B::C> upgraded to 1.05 =item * C<B::Concise> upgraded to 0.76 =over =item * new option C<-src> causes the rendering of each statement (starting with the nextstate OP) to be preceded by the first line of source code that generates it. =item * new option C<-stash="somepackage">, C<require>s "somepackage", and then renders each function defined in its namespace. =item * now has documentation of detailed hint symbols. =back =item * C<B::Debug> upgraded to version 1.05 =item * C<B::Deparse> upgraded to version 0.87 =over 4 =item * properly deparse C<print readpipe $x, $y>. =item * now handles C<< ''->() >>, C<::()>, C<sub :: {}>, I<etc.> correctly [RT #43010]. All bugs in parsing these kinds of syntax are now fixed: perl -MO=Deparse -e '"my %h = "->()' perl -MO=Deparse -e '::->()' perl -MO=Deparse -e 'sub :: {}' perl -MO=Deparse -e 'package a; sub a::b::c {}' perl -MO=Deparse -e 'sub the::main::road {}' =item * does B<not> deparse C<$^H{v_string}>, which is automatically set by the internals. =back =item * C<B::Lint> upgraded to version 1.11 =item * C<B::Terse> upgraded to version 1.05 =item * C<base> upgraded to version 2.13 =over 4 =item * loading a module via base.pm would mask a global C<$SIG{__DIE__}> in that module. =item * push all classes at once in C<@ISA> =back =item * C<Benchmark> upgraded to version 1.10 =item * C<bigint> upgraded to 0.23 =item * C<bignum> upgraded to 0.23 =item * C<bigrat> upgraded to 0.23 =item * C<blib> upgraded to 0.04 =item * C<Carp> upgraded to version 1.10 The argument backtrace code now shows C<undef> as C<undef>, instead of a string I<"undef">. =item * C<CGI> upgraded to version 3.42 =item * C<charnames> upgraded to 1.06 =item * C<constant> upgraded to version 1.17 =item * C<CPAN> upgraded to version 1.9301 =item * C<Cwd> upgraded to version 3.29 with some platform specific improvements (including for VMS). =item * C<Data::Dumper> upgraded to version 2.121_17 =over =item * Fixes hash iterator current position with the pure Perl version [RT #40668] =item * Performance enhancements, which will be most evident on platforms where repeated calls to C's C<realloc()> are slow, such as Win32. =back =item * C<DB_File> upgraded to version 1.817 =item * C<DB_Filter> upgraded to version 0.02 =item * C<Devel::DProf> upgraded to version 20080331.00 =item * C<Devel::Peek> upgraded to version 1.04 =item * C<Devel::PPPort> upgraded to version 3.14 =item * C<diagnostics> upgraded to version 1.16 =item * C<Digest> upgraded to version 1.15 =item * C<Digest::MD5> upgraded to version 2.37 =item * C<DirHandle> upgraded to version 1.02 =over =item * now localises C<$.>, C<$@>, C<$!>, C<$^E>, and C<$?> before closing the directory handle to suppress leaking any side effects of warnings about it already being closed. =back =item * C<DynaLoader> upgraded to version 1.09 C<DynaLoader> can now dynamically load a loadable object from a file with a non-default file extension. =item * C<Encode> upgraded to version 2.26 C<Encode::Alias> includes a fix for encoding "646" on Solaris (better known as ASCII). =item * C<English> upgraded to version 1.03 =item * C<Errno> upgraded to version 1.10 =item * C<Exporter> upgraded to version 5.63 =item * C<ExtUtils::Command> upgraded to version 1.15 =item * C<ExtUtils::Constant> upgraded to version 0.21 =item * C<ExtUtils::Embed> upgraded to version 1.28 =item * C<ExtUtils::Install> upgraded to version 1.50_01 =item * C<ExtUtils::Installed> upgraded to version 1.43 =item * C<ExtUtils::MakeMaker> upgraded to version 6.48 =over =item * support for C<INSTALLSITESCRIPT> and C<INSTALLVENDORSCRIPT> configuration. =back =item * C<ExtUtils::Manifest> upgraded to version 1.55 =item * C<ExtUtils::ParseXS> upgraded to version 2.19 =item * C<Fatal> upgraded to version 1.06 =over =item * allows built-ins in C<CORE::GLOBAL> to be made fatal. =back =item * C<Fcntl> upgraded to version 1.06 =item * C<fields> upgraded to version 2.12 =item * C<File::Basename> upgraded to version 2.77 =item * C<FileCache> upgraded to version 1.07 =item * C<File::Compare> upgraded to 1.1005 =item * C<File::Copy> upgraded to 2.13 =over 4 =item * now uses 3-arg open. =back =item * C<File::DosGlob> upgraded to 1.01 =item * C<File::Find> upgraded to version 1.13 =item * C<File::Glob> upgraded to version 1.06 =over =item * fixes spurious results with brackets inside braces. =back =item * C<File::Path> upgraded to version 2.07_02 =item * C<File::Spec> upgraded to version 3.29 =over 4 =item * improved handling of bad arguments. =item * some platform specific improvements (including for VMS and Cygwin), with an optimisation on C<abs2rel> when handling both relative arguments. =back =item * C<File::stat> upgraded to version 1.01 =item * C<File::Temp> upgraded to version 0.20 =item * C<filetest> upgraded to version 1.02 =item * C<Filter::Util::Call> upgraded to version 1.07 =item * C<Filter::Simple> upgraded to version 0.83 =item * C<FindBin> upgraded to version 1.49 =item * C<GDBM_File> upgraded to version 1.09 =item * C<Getopt::Long> upgraded to version 2.37 =item * C<Getopt::Std> upgraded to version 1.06 =item * C<Hash::Util> upgraded to version 0.06 =item * C<if> upgraded to version 0.05 =item * C<IO> upgraded to version 1.23 Reduced number of calls to C<getpeername> in C<IO::Socket> =item * C<IPC::Open> upgraded to version 1.03 =item * C<IPC::Open3> upgraded to version 1.03 =item * C<IPC::SysV> upgraded to version 2.00 =item * C<lib> upgraded to version 0.61 =over =item * avoid warning about loading F<.par> files. =back =item * C<libnet> upgraded to version 1.22 =item * C<List::Util> upgraded to 1.19 =item * C<Locale::Maketext> upgraded to 1.13 =item * C<Math::BigFloat> upgraded to version 1.60 =item * C<Math::BigInt> upgraded to version 1.89 =item * C<Math::BigRat> upgraded to version 0.22 =over 4 =item * implements new C<as_float> method. =back =item * C<Math::Complex> upgraded to version 1.54. =item * C<Math::Trig> upgraded to version 1.18. =item * C<NDBM_File> upgraded to version 1.07 =over =item * improve F<g++> handling for systems using GDBM compatibility headers. =back =item * C<Net::Ping> upgraded to version 2.35 =item * C<NEXT> upgraded to version 0.61 =over =item * fix several bugs with C<NEXT> when working with C<AUTOLOAD>, C<eval> block, and within overloaded stringification. =back =item * C<ODBM_File> upgraded to 1.07 =item * C<open> upgraded to 1.06 =item * C<ops> upgraded to 1.02 =item * C<PerlIO::encoding> upgraded to version 0.11 =item * C<PerlIO::scalar> upgraded to version 0.06 =over 4 =item * [RT #40267] C<PerlIO::scalar> doesn't respect readonly-ness. =back =item * C<PerlIO::via> upgraded to version 0.05 =item * C<Pod::Html> upgraded to version 1.09 =item * C<Pod::Parser> upgraded to version 1.35 =item * C<Pod::Usage> upgraded to version 1.35 =item * C<POSIX> upgraded to version 1.15 =over =item * C<POSIX> constants that duplicate those in C<Fcntl> are now imported from C<Fcntl> and re-exported, rather than being duplicated by C<POSIX> =item * C<POSIX::remove> can remove empty directories. =item * C<POSIX::setlocale> safer to call multiple times. =item * C<POSIX::SigRt> added, which provides access to POSIX realtime signal functionality on systems that support it. =back =item * C<re> upgraded to version 0.06_01 =item * C<Safe> upgraded to version 2.16 =item * C<Scalar::Util> upgraded to 1.19 =item * C<SDBM_File> upgraded to version 1.06 =item * C<SelfLoader> upgraded to version 1.17 =item * C<Shell> upgraded to version 0.72 =item * C<sigtrap> upgraded to version 1.04 =item * C<Socket> upgraded to version 1.81 =over =item * this fixes an optimistic use of C<gethostbyname> =back =item * C<Storable> upgraded to 2.19 =item * C<Switch> upgraded to version 2.13 =item * C<Sys::Syslog> upgraded to version 0.27 =item * C<Term::ANSIColor> upgraded to version 1.12 =item * C<Term::Cap> upgraded to version 1.12 =item * C<Term::ReadLine> upgraded to version 1.03 =item * C<Test::Builder> upgraded to version 0.80 =item * C<Test::Harness> upgraded version to 2.64 =over =item * this makes it able to handle newlines. =back =item * C<Test::More> upgraded to version 0.80 =item * C<Test::Simple> upgraded to version 0.80 =item * C<Text::Balanced> upgraded to version 1.98 =item * C<Text::ParseWords> upgraded to version 3.27 =item * C<Text::Soundex> upgraded to version 3.03 =item * C<Text::Tabs> upgraded to version 2007.1117 =item * C<Text::Wrap> upgraded to version 2006.1117 =item * C<Thread> upgraded to version 2.01 =item * C<Thread::Semaphore> upgraded to version 2.09 =item * C<Thread::Queue> upgraded to version 2.11 =over =item * added capability to add complex structures (e.g., hash of hashes) to queues. =item * added capability to dequeue multiple items at once. =item * added new methods to inspect and manipulate queues: C<peek>, C<insert> and C<extract> =back =item * C<Tie::Handle> upgraded to version 4.2 =item * C<Tie::Hash> upgraded to version 1.03 =item * C<Tie::Memoize> upgraded to version 1.1 =over =item * C<Tie::Memoize::EXISTS> now correctly caches its results. =back =item * C<Tie::RefHash> upgraded to version 1.38 =item * C<Tie::Scalar> upgraded to version 1.01 =item * C<Tie::StdHandle> upgraded to version 4.2 =item * C<Time::gmtime> upgraded to version 1.03 =item * C<Time::Local> upgraded to version 1.1901 =item * C<Time::HiRes> upgraded to version 1.9715 with various build improvements (including VMS) and minor platform-specific bug fixes (including for HP-UX 11 ia64). =item * C<threads> upgraded to 1.71 =over =item * new thread state information methods: C<is_running>, C<is_detached> and C<is_joinable>. C<list> method enhanced to return running or joinable threads. =item * new thread signal method: C<kill> =item * added capability to specify thread stack size. =item * added capability to control thread exiting behavior. Added a new C<exit> method. =back =item * C<threads::shared> upgraded to version 1.27 =over =item * smaller and faster implementation that eliminates one internal structure and the consequent level of indirection. =item * user locks are now stored in a safer manner. =item * new function C<shared_clone> creates a copy of an object leaving shared elements as-is and deep-cloning non-shared elements. =item * added new C<is_shared> method. =back =item * C<Unicode::Normalize> upgraded to version 1.02 =item * C<Unicode::UCD> upgraded to version 0.25 =item * C<warnings> upgraded to version 1.05_01 =item * C<Win32> upgraded to version 0.38 =over 4 =item * added new function C<GetCurrentProcessId> which returns the regular Windows process identifier of the current process, even when called from within a fork. =back =item * C<XSLoader> upgraded to version 0.10 =item * C<XS::APItest> and C<XS::Typemap> are for internal use only and hence no longer installed. Many more tests have been added to C<XS::APItest>. =back =head1 Utility Changes =head2 debugger upgraded to version 1.31 =over 4 =item * Andreas KE<ouml>nig contributed two functions to save and load the debugger history. =item * C<NEXT::AUTOLOAD> no longer emits warnings under the debugger. =item * The debugger should now correctly find tty the device on OS X 10.5 and VMS when the program C<fork>s. =item * LVALUE subs now work inside the debugger. =back =head2 F<perlthanks> Perl 5.8.9 adds a new utility F<perlthanks>, which is a variant of F<perlbug>, but for sending non-bug-reports to the authors and maintainers of Perl. Getting nothing but bug reports can become a bit demoralising - we'll see if this changes things. =head2 F<perlbug> F<perlbug> now checks if you're reporting about a non-core module and suggests you report it to the CPAN author instead. =head2 F<h2xs> =over =item * won't define an empty string as a constant [RT #25366] =item * has examples for C<h2xs -X> =back =head2 F<h2ph> =over 4 =item * now attempts to deal sensibly with the difference in path implications between C<""> and C<< E<lt>E<gt> >> quoting in C<#include> statements. =item * now generates correct code for C<#if defined A || defined B> [RT #39130] =back =head1 New Documentation As usual, the documentation received its share of corrections, clarifications and other nitfixes. More C<< X<...> >> tags were added for indexing. L<perlunitut> is a tutorial written by Juerd Waalboer on Unicode-related terminology and how to correctly handle Unicode in Perl scripts. L<perlunicode> is updated in section user defined properties. L<perluniintro> has been updated in the example of detecting data that is not valid in particular encoding. L<perlcommunity> provides an overview of the Perl Community along with further resources. L<CORE> documents the pseudo-namespace for Perl's core routines. =head1 Changes to Existing Documentation L<perlglossary> adds I<deprecated modules and features> and I<to be dropped modules>. L<perlhack> has been updated and added resources on smoke testing. The Perl FAQs (F<perlfaq1>..F<perlfaq9>) have been updated. L<perlcheat> is updated with better details on C<\w>, C<\d>, and C<\s>. L<perldebug> is updated with information on how to call the debugger. L<perldiag> documentation updated with I<subroutine with an ampersand> on the argument to C<exists> and C<delete> and also several terminology updates on warnings. L<perlfork> documents the limitation of C<exec> inside pseudo-processes. L<perlfunc>: =over =item * Documentation is fixed in section C<caller> and C<pop>. =item * Function C<alarm> now mentions C<Time::HiRes::ualarm> in preference to C<select>. =item * Regarding precedence in C<-X>, filetest operators are the same as unary operators, but not regarding parsing and parentheses (spotted by Eirik Berg Hanssen). =item * C<reverse> function documentation received scalar context examples. =back L<perllocale> documentation is adjusted for number localization and C<POSIX::setlocale> to fix Debian bug #379463. L<perlmodlib> is updated with C<CPAN::API::HOWTO> and C<Sys::Syslog::win32::Win32> L<perlre> documentation updated to reflect the differences between C<[[:xxxxx:]]> and C<\p{IsXxxxx}> matches. Also added section on C</g> and C</c> modifiers. L<perlreguts> describe the internals of the regular expressions engine. It has been contributed by Yves Orton. L<perlrebackslash> describes all perl regular expression backslash and escape sequences. L<perlrecharclass> describes the syntax and use of character classes in Perl Regular Expressions. L<perlrun> is updated to clarify on the hash seed I<PERL_HASH_SEED>. Also more information in options C<-x> and C<-u>. L<perlsub> example is updated to use a lexical variable for C<opendir> syntax. L<perlvar> fixes confusion about real GID C<$(> and effective GID C<$)>. Perl thread tutorial example is fixed in section L<perlthrtut/Queues: Passing Data Around> and L<perlthrtut>. L<perlhack> documentation extensively improved by Jarkko Hietaniemi and others. L<perltoot> provides information on modifying C<@UNIVERSAL::ISA>. L<perlport> documentation extended to include different C<kill(-9, ...)> semantics on Windows. It also clearly states C<dump> is not supported on Win32 and cygwin. F<INSTALL> has been updated and modernised. =head1 Performance Enhancements =over =item * The default since perl 5.000 has been for perl to create an empty scalar with every new typeglob. The increased use of lexical variables means that most are now unused. Thanks to Nicholas Clark's efforts, Perl can now be compiled with C<-DPERL_DONT_CREATE_GVSV> to avoid creating these empty scalars. This will significantly decrease the number of scalars allocated for all configurations, and the number of scalars that need to be copied for ithread creation. Whilst this option is binary compatible with existing perl installations, it does change a long-standing assumption about the internals, hence it is not enabled by default, as some third party code may rely on the old behaviour. We would recommend testing with this configuration on new deployments of perl, particularly for multi-threaded servers, to see whether all third party code is compatible with it, as this configuration may give useful performance improvements. For existing installations we would not recommend changing to this configuration unless thorough testing is performed before deployment. =item * C<diagnostics> no longer uses C<$&>, which results in large speedups for regexp matching in all code using it. =item * Regular expressions classes of a single character are now treated the same as if the character had been used as a literal, meaning that code that uses char-classes as an escaping mechanism will see a speedup. (Yves Orton) =item * Creating anonymous array and hash references (ie. C<[]> and C<{}>) now incurs no more overhead than creating an anonymous list or hash. Nicholas Clark provided changes with a saving of two ops and one stack push, which was measured as a slightly better than 5% improvement for these operations. =item * Many calls to C<strlen()> have been eliminated, either because the length was already known, or by adopting or enhancing APIs that pass lengths. This has been aided by the adoption of a C<my_sprintf()> wrapper, which returns the correct C89 value - the length of the formatted string. Previously we could not rely on the return value of C<sprintf()>, because on some ancient but extant platforms it still returns C<char *>. =item * C<index> is now faster if the search string is stored in UTF-8 but only contains characters in the Latin-1 range. =item * The Unicode swatch cache inside the regexp engine is now used. (the lookup had a key mismatch, present since the initial implementation). [RT #42839] =back =head1 Installation and Configuration Improvements =head2 Relocatable installations There is now F<Configure> support for creating a relocatable perl tree. If you F<Configure> with C<-Duserelocatableinc>, then the paths in C<@INC> (and everything else in C<%Config>) can be optionally located via the path of the F<perl> executable. At start time, if any paths in C<@INC> or C<Config> that F<Configure> marked as relocatable (by starting them with C<".../">), then they are prefixed the directory of C<$^X>. This allows the relocation can be configured on a per-directory basis, although the default with C<-Duserelocatableinc> is that everything is relocated. The initial install is done to the original configured prefix. =head2 Configuration improvements F<Configure> is now better at removing temporary files. Tom Callaway (from RedHat) also contributed patches that complete the set of flags passed to the compiler and the linker, in particular that C<-fPIC> is now enabled on Linux. It will also croak when your F</dev/null> isn't a device. A new configuration variable C<d_pseudofork> has been to F<Configure>, and is available as C<$Config{d_pseudofork}> in the C<Config> module. This distinguishes real C<fork> support from the pseudofork emulation used on Windows platforms. F<Config.pod> and F<config.sh> are now placed correctly for cross-compilation. C<$Config{useshrplib}> is now 'true' rather than 'yes' when using a shared perl library. =head2 Compilation improvements Parallel makes should work properly now, although there may still be problems if C<make test> is instructed to run in parallel. Many compilation warnings have been cleaned up. A very stubborn compiler warning in C<S_emulate_eaccess()> was killed after six attempts. F<g++> support has been tuned, especially for FreeBSD. F<mkppport> has been integrated, and all F<ppport.h> files in the core will now be autogenerated at build time (and removed during cleanup). =head2 Installation improvements. F<installman> now works with C<-Duserelocatableinc> and C<DESTDIR>. F<installperl> no longer installs: =over 4 =item * static library files of statically linked extensions when a shared perl library is being used. (They are not needed. See L</Windows> below). =item * F<SIGNATURE> and F<PAUSE*.pub> (CPAN files) =item * F<NOTES> and F<PATCHING> (ExtUtils files) =item * F<perlld> and F<ld2> (Cygwin files) =back =head2 Platform Specific Changes There are improved hints for AIX, Cygwin, DEC/OSF, FreeBSD, HP/UX, Irix 6 Linux, MachTen, NetBSD, OS/390, QNX, SCO, Solaris, SunOS, System V Release 5.x (UnixWare 7, OpenUNIX 8), Ultrix, UMIPS, uts and VOS. =head3 FreeBSD =over 4 =item * Drop C<-std=c89> and C<-ansi> if using C<long long> as the main integral type, else in FreeBSD 6.2 (and perhaps other releases), system headers do not declare some functions required by perl. =back =head3 Solaris =over 4 =item * Starting with Solaris 10, we do not want versioned shared libraries, because those often indicate a private use only library. These problems could often be triggered when L<SUNWbdb> (Berkeley DB) was installed. Hence if Solaris 10 is detected set C<ignore_versioned_solibs=y>. =back =head3 VMS =over 4 =item * Allow IEEE math to be deselected on OpenVMS I64 (but it remains the default). =item * Record IEEE usage in C<config.h> =item * Help older VMS compilers by using C<ccflags> when building C<munchconfig.exe>. =item * Don't try to build old C<Thread> extension on VMS when C<-Duseithreads> has been chosen. =item * Passing a raw string of "NaN" to F<nawk> causes a core dump - so the string has been changed to "*NaN*" =item * F<t/op/stat.t> tests will now test hard links on VMS if they are supported. =back =head3 Windows =over 4 =item * When using a shared perl library F<installperl> no longer installs static library files, import library files and export library files (of statically linked extensions) and empty bootstrap files (of dynamically linked extensions). This fixes a problem building PAR-Packer on Win32 with a debug build of perl. =item * Various improvements to the win32 build process, including support for Visual C++ 2005 Express Edition (aka Visual C++ 8.x). =item * F<perl.exe> will now have an icon if built with MinGW or Borland. =item * Improvements to the perl-static.exe build process. =item * Add Win32 makefile option to link all extensions statically. =item * The F<WinCE> directory has been merged into the F<Win32> directory. =item * C<setlocale> tests have been re-enabled for Windows XP onwards. =back =head1 Selected Bug Fixes =head2 Unicode Many many bugs related to the internal Unicode implementation (UTF-8) have been fixed. In particular, long standing bugs related to returning Unicode via C<tie>, overloading or C<$@> are now gone, some of which were never reported. C<unpack> will internally convert the string back from UTF-8 on numeric types. This is a compromise between the full consistency now in 5.10, and the current behaviour, which is often used as a "feature" on string types. Using C<:crlf> and C<UTF-16> IO layers together will now work. Fixed problems with C<split>, Unicode C</\s+/> and C</ \0/>. Fixed bug RT #40641 - encoding of Unicode characters in regular expressions. Fixed a bug where using certain patterns in a regexp led to a panic. [RT #45337] Perl no longer segfaults (due to infinite internal recursion) if the locale's character is not UTF-8 [RT #41442]: use open ':locale'; print STDERR "\x{201e}"; # „ =head2 PerlIO Inconsistencies have been fixed in the reference counting PerlIO uses to keep track of Unix file descriptors, and the API used by XS code to manage getting and releasing C<FILE *>s =head2 Magic Several bugs have been fixed in Magic, the internal system used to implement features such as C<tie>, tainting and threads sharing. C<undef @array> on a tied array now correctly calls the C<CLEAR> method. Some of the bitwise ops were not checking whether their arguments were magical before using them. [RT #24816] Magic is no longer invoked twice by the expression C<\&$x> A bug with assigning large numbers and tainting has been resolved. [RT #40708] A new entry has been added to the MAGIC vtable - C<svt_local>. This is used when copying magic to the new value during C<local>, allowing certain problems with localising shared variables to be resolved. For the implementation details, see L<perlguts/Magic Virtual Tables>. =head2 Reblessing overloaded objects now works Internally, perl object-ness is on the referent, not the reference, even though methods can only be called via a reference. However, the original implementation of overloading stored flags related to overloading on the reference, relying on the flags being copied when the reference was copied, or set at the creation of a new reference. This manifests in a bug - if you rebless an object from a class that has overloading, into one that does not, then any other existing references think that they (still) point to an overloaded object, choose these C code paths, and then throw errors. Analogously, blessing into an overloaded class when other references exist will result in them not using overloading. The implementation has been fixed for 5.10, but this fix changes the semantics of flag bits, so is not binary compatible, so can't be applied to 5.8.9. However, 5.8.9 has a work-around that implements the same bug fix. If the referent has multiple references, then all the other references are located and corrected. A full search is avoided whenever possible by scanning lexicals outwards from the current subroutine, and the argument stack. A certain well known Linux vendor applied incomplete versions of this bug fix to their F</usr/bin/perl> and then prematurely closed bug reports about performance issues without consulting back upstream. This not being enough, they then proceeded to ignore the necessary fixes to these unreleased changes for 11 months, until massive pressure was applied by their long-suffering paying customers, catalysed by the failings being featured on a prominent blog and Slashdot. =head2 C<strict> now propagates correctly into string evals Under 5.8.8 and earlier: $ perl5.8.8 -e 'use strict; eval "use foo bar" or die $@' Can't locate foo.pm in @INC (@INC contains: ... .) at (eval 1) line 2. BEGIN failed--compilation aborted at (eval 1) line 2. Under 5.8.9 and later: $ perl5.8.9 -e 'use strict; eval "use foo bar" or die $@' Bareword "bar" not allowed while "strict subs" in use at (eval 1) line 1. This may cause problems with programs that parse the error message and rely on the buggy behaviour. =head2 Other fixes =over =item * The tokenizer no longer treats C<=cute> (and other words beginning with C<=cut>) as a synonym for C<=cut>. =item * Calling C<CORE::require> C<CORE::require> and C<CORE::do> were always parsed as C<require> and C<do> when they were overridden. This is now fixed. =item * Stopped memory leak on long F</etc/groups> entries. =item * C<while (my $x ...) { ...; redo }> shouldn't C<undef $x>. In the presence of C<my> in the conditional of a C<while()>, C<until()>, or C<for(;;)> loop, we now add an extra scope to the body so that C<redo> doesn't C<undef> the lexical. =item * The C<encoding> pragma now correctly ignores anything following an C<@> character in the C<LC_ALL> and C<LANG> environment variables. [RT # 49646] =item * A segfault observed with some F<gcc> 3.3 optimisations is resolved. =item * A possible segfault when C<unpack> used in scalar context with C<()> groups is resolved. [RT #50256] =item * Resolved issue where C<$!> could be changed by a signal handler interrupting a C<system> call. =item * Fixed bug RT #37886, symbolic dereferencing was allowed in the argument of C<defined> even under the influence of C<use strict 'refs'>. =item * Fixed bug RT #43207, where C<lc>/C<uc> inside C<sort> affected the return value. =item * Fixed bug RT #45607, where C<*{"BONK"} = \&{"BONK"}> didn't work correctly. =item * Fixed bug RT #35878, croaking from a XSUB called via C<goto &xsub> corrupts perl internals. =item * Fixed bug RT #32539, F<DynaLoader.o> is moved into F<libperl.so> to avoid the need to statically link DynaLoader into the stub perl executable. With this F<libperl.so> provides everything needed to get a functional embedded perl interpreter to run. =item * Fix bug RT #36267 so that assigning to a tied hash doesn't change the underlying hash. =item * Fix bug RT #6006, regexp replaces using large replacement variables fail some of the time, I<i.e.> when substitution contains something like C<${10}> (note the bracket) instead of just C<$10>. =item * Fix bug RT #45053, C<Perl_newCONSTSUB()> is now thread safe. =back =head2 Platform Specific Fixes =head3 Darwin / MacOS X =over 4 =item * Various improvements to 64 bit builds. =item * Mutex protection added in C<PerlIOStdio_close()> to avoid race conditions. Hopefully this fixes failures in the threads tests F<free.t> and F<blocks.t>. =item * Added forked terminal support to the debugger, with the ability to update the window title. =back =head3 OS/2 =over 4 =item * A build problem with specifying C<USE_MULTI> and C<USE_ITHREADS> but without C<USE_IMP_SYS> has been fixed. =item * C<OS2::REXX> upgraded to version 1.04 =back =head3 Tru64 =over 4 =item * Aligned floating point build policies for F<cc> and F<gcc>. =back =head3 RedHat Linux =over 4 =item * Revisited a patch from 5.6.1 for RH7.2 for Intel's F<icc> [RT #7916], added an additional check for C<$Config{gccversion}>. =back =head3 Solaris/i386 =over 4 =item * Use C<-DPTR_IS_LONG> when using 64 bit integers =back =head3 VMS =over 4 =item * Fixed C<PerlIO::Scalar> in-memory file record-style reads. =item * pipe shutdown at process exit should now be more robust. =item * Bugs in VMS exit handling tickled by C<Test::Harness> 2.64 have been fixed. =item * Fix C<fcntl()> locking capability test in F<configure.com>. =item * Replaced C<shrplib='define'> with C<useshrplib='true'> on VMS. =back =head3 Windows =over 4 =item * C<File::Find> used to fail when the target directory is a bare drive letter and C<no_chdir> is 1 (the default is 0). [RT #41555] =item * A build problem with specifying C<USE_MULTI> and C<USE_ITHREADS> but without C<USE_IMP_SYS> has been fixed. =item * The process id is no longer truncated to 16 bits on some Windows platforms ( http://bugs.activestate.com/show_bug.cgi?id=72443 ) =item * Fixed bug RT #54828 in F<perlio.c> where calling C<binmode> on Win32 and Cygwin may cause a segmentation fault. =back =head2 Smaller fixes =over 4 =item * It is now possible to overload C<eq> when using C<nomethod>. =item * Various problems using C<overload> with 64 bit integers corrected. =item * The reference count of C<PerlIO> file descriptors is now correctly handled. =item * On VMS, escaped dots will be preserved when converted to Unix syntax. =item * C<keys %+> no longer throws an C<'ambiguous'> warning. =item * Using C<#!perl -d> could trigger an assertion, which has been fixed. =item * Don't stringify tied code references in C<@INC> when calling C<require>. =item * Code references in C<@INC> report the correct file name when C<__FILE__> is used. =item * Width and precision in sprintf didn't handle characters above 255 correctly. [RT #40473] =item * List slices with indices out of range now work more consistently. [RT #39882] =item * A change introduced with perl 5.8.1 broke the parsing of arguments of the form C<-foo=bar> with the C<-s> on the <#!> line. This has been fixed. See http://bugs.activestate.com/show_bug.cgi?id=43483 =item * C<tr///> is now threadsafe. Previously it was storing a swash inside its OP, rather than in a pad. =item * F<pod2html> labels anchors more consistently and handles nested definition lists better. =item * C<threads> cleanup veto has been extended to include C<perl_free()> and C<perl_destruct()> =item * On some systems, changes to C<$ENV{TZ}> would not always be respected by the underlying calls to C<localtime_r()>. Perl now forces the inspection of the environment on these systems. =item * The special variable C<$^R> is now more consistently set when executing regexps using the C<(?{...})> construct. In particular, it will still be set even if backreferences or optional sub-patterns C<(?:...)?> are used. =back =head1 New or Changed Diagnostics =head2 panic: sv_chop %s This new fatal error occurs when the C routine C<Perl_sv_chop()> was passed a position that is not within the scalar's string buffer. This is caused by buggy XS code, and at this point recovery is not possible. =head2 Maximal count of pending signals (%s) exceeded This new fatal error occurs when the perl process has to abort due to too many pending signals, which is bound to prevent perl from being able to handle further incoming signals safely. =head2 panic: attempt to call %s in %s This new fatal error occurs when the ACL version file test operator is used where it is not available on the current platform. Earlier checks mean that it should never be possible to get this. =head2 FETCHSIZE returned a negative value New error indicating that a tied array has claimed to have a negative number of elements. =head2 Can't upgrade %s (%d) to %d Previously the internal error from the SV upgrade code was the less informative I<Can't upgrade that kind of scalar>. It now reports the current internal type, and the new type requested. =head2 %s argument is not a HASH or ARRAY element or a subroutine This error, thrown if an invalid argument is provided to C<exists> now correctly includes "or a subroutine". [RT #38955] =head2 Cannot make the non-overridable builtin %s fatal This error in C<Fatal> previously did not show the name of the builtin in question (now represented by %s above). =head2 Unrecognized character '%s' in column %d This error previously did not state the column. =head2 Offset outside string This can now also be generated by a C<seek> on a file handle using C<PerlIO::scalar>. =head2 Invalid escape in the specified encoding in regexp; marked by <-- HERE in m/%s/ New error, introduced as part of the fix to RT #40641 to handle encoding of Unicode characters in regular expression comments. =head2 Your machine doesn't support dump/undump. A more informative fatal error issued when calling C<dump> on Win32 and Cygwin. (Given that the purpose of C<dump> is to abort with a core dump, and core dumps can't be produced on these platforms, this is more useful than silently exiting.) =head1 Changed Internals The perl sources can now be compiled with a C++ compiler instead of a C compiler. A necessary implementation details is that under C++, the macro C<XS> used to define XSUBs now includes an C<extern "C"> definition. A side effect of this is that B<C++> code that used the construction typedef XS(SwigPerlWrapper); now needs to be written typedef XSPROTO(SwigPerlWrapper); using the new C<XSPROTO> macro, in order to compile. C extensions are unaffected, although C extensions are encouraged to use C<XSPROTO> too. This change was present in the 5.10.0 release of perl, so any actively maintained code that happened to use this construction should already have been adapted. Code that needs changing will fail with a compilation error. C<set> magic on localizing/assigning to a magic variable will now only trigger for I<container magics>, i.e. it will for C<%ENV> or C<%SIG> but not for C<$#array>. The new API macro C<newSVpvs()> can be used in place of constructions such as C<newSVpvn("ISA", 3)>. It takes a single string constant, and at C compile time determines its length. The new API function C<Perl_newSV_type()> can be used as a more efficient replacement of the common idiom sv = newSV(0); sv_upgrade(sv, type); Similarly C<Perl_newSVpvn_flags()> can be used to combine C<Perl_newSVpv()> with C<Perl_sv_2mortal()> or the equivalent C<Perl_sv_newmortal()> with C<Perl_sv_setpvn()> Two new macros C<mPUSHs()> and C<mXPUSHs()> are added, to make it easier to push mortal SVs onto the stack. They were then used to fix several bugs where values on the stack had not been mortalised. A C<Perl_signbit()> function was added to test the sign of an C<NV>. It maps to the system one when available. C<Perl_av_reify()>, C<Perl_lex_end()>, C<Perl_mod()>, C<Perl_op_clear()>, C<Perl_pop_return()>, C<Perl_qerror()>, C<Perl_setdefout()>, C<Perl_vivify_defelem()> and C<Perl_yylex()> are now visible to extensions. This was required to allow C<Data::Alias> to work on Windows. C<Perl_find_runcv()> is now visible to perl core extensions. This was required to allow C<Sub::Current> to work on Windows. C<ptr_table*> functions are now available in unthreaded perl. C<Storable> takes advantage of this. There have been many small cleanups made to the internals. In particular, C<Perl_sv_upgrade()> has been simplified considerably, with a straight-through code path that uses C<memset()> and C<memcpy()> to initialise the new body, rather than assignment via multiple temporary variables. It has also benefited from simplification and de-duplication of the arena management code. A lot of small improvements in the code base were made due to reports from the Coverity static code analyzer. Corrected use and documentation of C<Perl_gv_stashpv()>, C<Perl_gv_stashpvn()>, C<Perl_gv_stashsv()> functions (last parameter is a bitmask, not boolean). C<PERL_SYS_INIT>, C<PERL_SYS_INIT3> and C<PERL_SYS_TERM> macros have been changed into functions. C<PERLSYS_TERM> no longer requires a context. C<PerlIO_teardown()> is now called without a context, and debugging output in this function has been disabled because that required that an interpreter was present, an invalid assumption at termination time. All compile time options which affect binary compatibility have been grouped together into a global variable (C<PL_bincompat_options>). The values of C<PERL_REVISION>, C<PERL_VERSION> and C<PERL_SUBVERSION> are now baked into global variables (and hence into any shared perl library). Additionally under C<MULTIPLICITY>, the perl executable now records the size of the interpreter structure (total, and for this version). Coupled with C<PL_bincompat_options> this will allow 5.8.10 (and later), when compiled with a shared perl library, to perform sanity checks in C<main()> to verify that the shared library is indeed binary compatible. Symbolic references can now have embedded NULs. The new public function C<Perl_get_cvn_flags()> can be used in extensions if you have to handle them. =head2 Macro cleanups The core code, and XS code in F<ext> that is not dual-lived on CPAN, no longer uses the macros C<PL_na>, C<NEWSV()>, C<Null()>, C<Nullav>, C<Nullcv>, C<Nullhv>, C<Nullhv> I<etc>. Their use is discouraged in new code, particularly C<PL_na>, which is a small performance hit. =head1 New Tests Many modules updated from CPAN incorporate new tests. Some core specific tests have been added: =over 4 =item ext/DynaLoader/t/DynaLoader.t Tests for the C<DynaLoader> module. =item t/comp/fold.t Tests for compile-time constant folding. =item t/io/pvbm.t Tests incorporated from 5.10.0 which check that there is no unexpected interaction between the internal types C<PVBM> and C<PVGV>. =item t/lib/proxy_constant_subs.t Tests for the new form of constant subroutines. =item t/op/attrhand.t Tests for C<Attribute::Handlers>. =item t/op/dbm.t Tests for C<dbmopen>. =item t/op/inccode-tie.t Calls all tests in F<t/op/inccode.t> after first tying C<@INC>. =item t/op/incfilter.t Tests for source filters returned from code references in C<@INC>. =item t/op/kill0.t Tests for RT #30970. =item t/op/qrstack.t Tests for RT #41484. =item t/op/qr.t Tests for the C<qr//> construct. =item t/op/regexp_qr_embed.t Tests for the C<qr//> construct within another regexp. =item t/op/regexp_qr.t Tests for the C<qr//> construct. =item t/op/rxcode.t Tests for RT #32840. =item t/op/studytied.t Tests for C<study> on tied scalars. =item t/op/substT.t Tests for C<subst> run under C<-T> mode. =item t/op/symbolcache.t Tests for C<undef> and C<delete> on stash entries that are bound to subroutines or methods. =item t/op/upgrade.t Tests for C<Perl_sv_upgrade()>. =item t/mro/package_aliases.t MRO tests for C<isa> and package aliases. =item t/pod/twice.t Tests for calling C<Pod::Parser> twice. =item t/run/cloexec.t Tests for inheriting file descriptors across C<exec> (close-on-exec). =item t/uni/cache.t Tests for the UTF-8 caching code. =item t/uni/chr.t Test that strange encodings do not upset C<Perl_pp_chr()>. =item t/uni/greek.t Tests for RT #40641. =item t/uni/latin2.t Tests for RT #40641. =item t/uni/overload.t Tests for returning Unicode from overloaded values. =item t/uni/tie.t Tests for returning Unicode from tied variables. =back =head1 Known Problems There are no known new bugs. However, programs that rely on bugs that have been fixed will have problems. Also, many bug fixes present in 5.10.0 can't be back-ported to the 5.8.x branch, because they require changes that are binary incompatible, or because the code changes are too large and hence too risky to incorporate. We have only limited volunteer labour, and the maintenance burden is getting increasingly complex. Hence this will be the last significant release of the 5.8.x series. Any future releases of 5.8.x will likely only be to deal with security issues, and platform build failures. Hence you should look to migrating to 5.10.x, if you have not started already. Alternatively, if business requirements constrain you to continue to use 5.8.x, you may wish to consider commercial support from firms such as ActiveState. =head1 Platform Specific Notes =head2 Win32 C<readdir()>, C<cwd()>, C<$^X> and C<@INC> now use the alternate (short) filename if the long name is outside the current codepage (Jan Dubois). =head3 Updated Modules =over 4 =item * C<Win32> upgraded to version 0.38. Now has a documented 'WinVista' response from C<GetOSName> and support for Vista's privilege elevation in C<IsAdminUser>. Support for Unicode characters in path names. Improved cygwin and Win64 compatibility. =item * C<Win32API> updated to 0.1001_01 =item * C<killpg()> support added to C<MSWin32> (Jan Dubois). =item * C<File::Spec::Win32> upgraded to version 3.2701 =back =head2 OS/2 =head3 Updated Modules =over 4 =item * C<OS2::Process> upgraded to 1.03 Ilya Zakharevich has added and documented several C<Window*> and C<Clipbrd*> functions. =item * C<OS2::REXX::DLL>, C<OS2::REXX> updated to version 1.03 =back =head2 VMS =head3 Updated Modules =over 4 =item * C<DCLsym> upgraded to version 1.03 =item * C<Stdio> upgraded to version 2.4 =item * C<VMS::XSSymSet> upgraded to 1.1. =back =head1 Obituary Nick Ing-Simmons, long time Perl hacker, author of the C<Tk> and C<Encode> modules, F<perlio.c> in the core, and 5.003_02 pumpking, died of a heart attack on 25th September 2006. He will be missed. =head1 Acknowledgements Some of the work in this release was funded by a TPF grant. Steve Hay worked behind the scenes working out the causes of the differences between core modules, their CPAN releases, and previous core releases, and the best way to rectify them. He doesn't want to do it again. I know this feeling, and I'm very glad he did it this time, instead of me. Paul Fenwick assembled a team of 18 volunteers, who broke the back of writing this document. In particular, Bradley Dean, Eddy Tan, and Vincent Pit provided half the team's contribution. Schwern verified the list of updated module versions, correcting quite a few errors that I (and everyone else) had missed, both wrongly stated module versions, and changed modules that had not been listed. The crack Berlin-based QA team of Andreas KE<ouml>nig and Slaven Rezic tirelessly re-built snapshots, tested most everything CPAN against them, and then identified the changes responsible for any module regressions, ensuring that several show-stopper bugs were stomped before the first release candidate was cut. The other core committers contributed most of the changes, and applied most of the patches sent in by the hundreds of contributors listed in F<AUTHORS>. And obviously, Larry Wall, without whom we wouldn't have Perl. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://bugs.perl.org. There may also be information at http://www.perl.org, the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. You can browse and search the Perl 5 bugs at http://bugs.perl.org/ If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl5300delta.pod 0000644 00000120501 15125556335 0007545 0 ustar 00 =encoding utf8 =head1 NAME perl5300delta - what is new for perl v5.30.0 =head1 DESCRIPTION This document describes differences between the 5.28.0 release and the 5.30.0 release. If you are upgrading from an earlier release such as 5.26.0, first read L<perl5280delta>, which describes differences between 5.26.0 and 5.28.0. =head1 Notice sv_utf8_(downgrade|decode) are no longer marked as experimental. L<[perl #133788]|https://rt.perl.org/Ticket/Display.html?id=133788>. =head1 Core Enhancements =head2 Limited variable length lookbehind in regular expression pattern matching is now experimentally supported Using a lookbehind assertion (like C<(?<=foo?)> or C<(?<!ba{1,9}r)> previously would generate an error and refuse to compile. Now it compiles (if the maximum lookbehind is at most 255 characters), but raises a warning in the new C<experimental::vlb> warnings category. This is to caution you that the precise behavior is subject to change based on feedback from use in the field. See L<perlre/(?<=pattern)> and L<perlre/(?<!pattern)>. =head2 The upper limit C<"n"> specifiable in a regular expression quantifier of the form C<"{m,n}"> has been doubled to 65534 The meaning of an unbounded upper quantifier C<"{m,}"> remains unchanged. It matches 2**31 - 1 times on most platforms, and more on ones where a C language short variable is more than 4 bytes long. =head2 Unicode 12.1 is supported Because of a change in Unicode release cycles, Perl jumps from Unicode 10.0 in Perl 5.28 to Unicode 12.1 in Perl 5.30. For details on the Unicode changes, see L<https://www.unicode.org/versions/Unicode11.0.0/> for 11.0; L<https://www.unicode.org/versions/Unicode12.0.0/> for 12.0; and L<https://www.unicode.org/versions/Unicode12.1.0/> for 12.1. (Unicode 12.1 differs from 12.0 only in the addition of a single character, that for the new Japanese era name.) The Word_Break property, as in past Perl releases, remains tailored to behave more in line with expectations of Perl users. This means that sequential runs of horizontal white space characters are not broken apart, but kept as a single run. Unicode 11 changed from past versions to be more in line with Perl, but it left several white space characters as causing breaks: TAB, NO BREAK SPACE, and FIGURE SPACE (U+2007). We have decided to continue to use the previous Perl tailoring with regards to these. =head2 Wildcards in Unicode property value specifications are now partially supported You can now do something like this in a regular expression pattern qr! \p{nv= /(?x) \A [0-5] \z / }! which matches all Unicode code points whose numeric value is between 0 and 5 inclusive. So, it could match the Thai or Bengali digits whose numeric values are 0, 1, 2, 3, 4, or 5. This marks another step in implementing the regular expression features the Unicode Consortium suggests. Most properties are supported, with the remainder planned for 5.32. Details are in L<perlunicode/Wildcards in Property Values>. =head2 qr'\N{name}' is now supported Previously it was an error to evaluate a named character C<\N{...}> within a single quoted regular expression pattern (whose evaluation is deferred from the normal place). This restriction is now removed. =head2 Turkic UTF-8 locales are now seamlessly supported Turkic languages have different casing rules than other languages for the characters C<"i"> and C<"I">. The uppercase of C<"i"> is LATIN CAPITAL LETTER I WITH DOT ABOVE (U+0130); and the lowercase of C<"I"> is LATIN SMALL LETTER DOTLESS I (U+0131). Unicode furnishes alternate casing rules for use with Turkic languages. Previously, Perl ignored these, but now, it uses them when it detects that it is operating under a Turkic UTF-8 locale. =head2 It is now possible to compile perl to always use thread-safe locale operations. Previously, these calls were only used when the perl was compiled to be multi-threaded. To always enable them, add -Accflags='-DUSE_THREAD_SAFE_LOCALE' to your F<Configure> flags. =head2 Eliminate opASSIGN macro usage from core This macro is still defined but no longer used in core =head2 C<-Drv> now means something on C<-DDEBUGGING> builds Now, adding the verbose flag (C<-Dv>) to the C<-Dr> flag turns on all possible regular expression debugging. =head1 Incompatible Changes =head2 Assigning non-zero to C<$[> is fatal Setting L<< C<$[>|perlvar/$[ >> to a non-zero value has been deprecated since Perl 5.12 and now throws a fatal error. See L<<< perldeprecation/Assigning non-zero to C<< $[ >> is fatal >>>. =head2 Delimiters must now be graphemes See L<perldeprecation/Use of unassigned code point or non-standalone grapheme for a delimiter.> =head2 Some formerly deprecated uses of an unescaped left brace C<"{"> in regular expression patterns are now illegal But to avoid breaking code unnecessarily, most instances that issued a deprecation warning, remain legal and now have a non-deprecation warning raised. See L<perldeprecation/Unescaped left braces in regular expressions>. =head2 Previously deprecated sysread()/syswrite() on :utf8 handles is now fatal Calling sysread(), syswrite(), send() or recv() on a C<:utf8> handle, whether applied explicitly or implicitly, is now fatal. This was deprecated in perl 5.24. There were two problems with calling these functions on C<:utf8> handles: =over =item * All four functions only paid attention to the C<:utf8> flag. Other layers were completely ignored, so a handle with C<:encoding(UTF-16LE)> layer would be treated as UTF-8. Other layers, such as compression are completely ignored with or without the C<:utf8> flag. =item * sysread() and recv() would read from the handle, skipping any validation by the layers, and do no validation of their own. This could lead to invalidly encoded perl scalars. =back L<[perl #125760]|https://rt.perl.org/Ticket/Display.html?id=125760>. =head2 my() in false conditional prohibited Declarations such as C<my $x if 0> are no longer permitted. L<[perl #133543]|https://rt.perl.org/Ticket/Display.html?id=133543>. =head2 Fatalize $* and $# These special variables, long deprecated, now throw exceptions when used. L<[perl #133583]|https://rt.perl.org/Ticket/Display.html?id=133583>. =head2 Fatalize unqualified use of dump() The C<dump()> function, long discouraged, may no longer be used unless it is fully qualified, I<i.e.>, C<CORE::dump()>. L<[perl #133584]|https://rt.perl.org/Ticket/Display.html?id=133584>. =head2 Remove File::Glob::glob() The C<File::Glob::glob()> function, long deprecated, has been removed and now throws an exception which advises use of C<File::Glob::bsd_glob()> instead. L<[perl #133586]|https://rt.perl.org/Ticket/Display.html?id=133586>. =head2 C<pack()> no longer can return malformed UTF-8 It croaks if it would otherwise return a UTF-8 string that contains malformed UTF-8. This protects against potential security threats. This is considered a bug fix as well. L<[perl #131642]|https://rt.perl.org/Ticket/Display.html?id=131642>. =head2 Any set of digits in the Common script are legal in a script run of another script There are several sets of digits in the Common script. C<[0-9]> is the most familiar. But there are also C<[\x{FF10}-\x{FF19}]> (FULLWIDTH DIGIT ZERO - FULLWIDTH DIGIT NINE), and several sets for use in mathematical notation, such as the MATHEMATICAL DOUBLE-STRUCK DIGITs. Any of these sets should be able to appear in script runs of, say, Greek. But the design of 5.30 overlooked all but the ASCII digits C<[0-9]>, so the design was flawed. This has been fixed, so is both a bug fix and an incompatibility. L<[perl #133547]|https://rt.perl.org/Ticket/Display.html?id=133547>. All digits in a run still have to come from the same set of ten digits. =head2 JSON::PP enables allow_nonref by default As JSON::XS 4.0 changed its policy and enabled allow_nonref by default, JSON::PP also enabled allow_nonref by default. =head1 Deprecations =head2 In XS code, use of various macros dealing with UTF-8. This deprecation was scheduled to become fatal in 5.30, but has been delayed to 5.32 due to problems that showed up with some CPAN modules. For details of what's affected, see L<perldeprecation| perldeprecation/In XS code, use of various macros dealing with UTF-8.>. =head1 Performance Enhancements =over 4 =item * Translating from UTF-8 into the code point it represents now is done via a deterministic finite automaton, speeding it up. As a typical example, C<ord("\x7fff")> now requires 12% fewer instructions than before. The performance of checking that a sequence of bytes is valid UTF-8 is similarly improved, again by using a DFA. =item * Eliminate recursion from finalize_op(). L<[perl #108276]|https://rt.perl.org/Ticket/Display.html?id=108276>. =item * A handful of small optimizations related to character folding and character classes in regular expressions. =item * Optimization of C<IV> to C<UV> conversions. L<[perl #133677]|https://rt.perl.org/Ticket/Display.html?id=133677>. =item * Speed up of the integer stringification algorithm by processing two digits at a time instead of one. L<[perl #133691]|https://rt.perl.org/Ticket/Display.html?id=133691>. =item * Improvements based on LGTM analysis and recommendation. (L<https://lgtm.com/projects/g/Perl/perl5/alerts/?mode=tree>). L<[perl #133686]|https://rt.perl.org/Ticket/Display.html?id=133686>. L<[perl #133699]|https://rt.perl.org/Ticket/Display.html?id=133699>. =item * Code optimizations in F<regcomp.c>, F<regcomp.h>, F<regexec.c>. =item * Regular expression pattern matching of things like C<qr/[^I<a>]/> is significantly sped up, where I<a> is any ASCII character. Other classes can get this speed up, but which ones is complicated and depends on the underlying bit patterns of those characters, so differs between ASCII and EBCDIC platforms, but all case pairs, like C<qr/[Gg]/> are included, as is C<[^01]>. =back =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Archive::Tar> has been upgraded from version 2.30 to 2.32. =item * L<B> has been upgraded from version 1.74 to 1.76. =item * L<B::Concise> has been upgraded from version 1.003 to 1.004. =item * L<B::Deparse> has been upgraded from version 1.48 to 1.49. =item * L<bignum> has been upgraded from version 0.49 to 0.51. =item * L<bytes> has been upgraded from version 1.06 to 1.07. =item * L<Carp> has been upgraded from version 1.38 to 1.50 =item * L<Compress::Raw::Bzip2> has been upgraded from version 2.074 to 2.084. =item * L<Compress::Raw::Zlib> has been upgraded from version 2.076 to 2.084. =item * L<Config::Extensions> has been upgraded from version 0.02 to 0.03. =item * L<Config::Perl::V>. has been upgraded from version 0.29 to 0.32. This was due to a new configuration variable that has influence on binary compatibility: C<USE_THREAD_SAFE_LOCALE>. =item * L<CPAN> has been upgraded from version 2.20 to 2.22. =item * L<Data::Dumper> has been upgraded from version 2.170 to 2.174 L<Data::Dumper> now avoids leaking when C<croak>ing. =item * L<DB_File> has been upgraded from version 1.840 to 1.843. =item * L<deprecate> has been upgraded from version 0.03 to 0.04. =item * L<Devel::Peek> has been upgraded from version 1.27 to 1.28. =item * L<Devel::PPPort> has been upgraded from version 3.40 to 3.52. =item * L<Digest::SHA> has been upgraded from version 6.01 to 6.02. =item * L<Encode> has been upgraded from version 2.97 to 3.01. =item * L<Errno> has been upgraded from version 1.29 to 1.30. =item * L<experimental> has been upgraded from version 0.019 to 0.020. =item * L<ExtUtils::CBuilder> has been upgraded from version 0.280230 to 0.280231. =item * L<ExtUtils::Manifest> has been upgraded from version 1.70 to 1.72. =item * L<ExtUtils::Miniperl> has been upgraded from version 1.08 to 1.09. =item * L<ExtUtils::ParseXS> has been upgraded from version 3.39 to 3.40. C<OUTLIST> parameters are no longer incorrectly included in the automatically generated function prototype. L<[perl #133654]|https://rt.perl.org/Ticket/Display.html?id=133654>. =item * L<feature> has been upgraded from version 1.52 to 1.54. =item * L<File::Copy> has been upgraded from version 2.33 to 2.34. =item * L<File::Find> has been upgraded from version 1.34 to 1.36. C<$File::Find::dont_use_nlink> now defaults to 1 on all platforms. L<[perl #133673]|https://rt.perl.org/Ticket/Display.html?id=133673>. Variables C<< $Is_Win32 >> and C<< $Is_VMS >> are being initialized. =item * L<File::Glob> has been upgraded from version 1.31 to 1.32. =item * L<File::Path> has been upgraded from version 2.15 to 2.16. =item * L<File::Spec> has been upgraded from version 3.74 to 3.78. Silence L<Cwd> warning on Android builds if C<targetsh> is not defined. =item * L<File::Temp> has been upgraded from version 0.2304 to 0.2309. =item * L<Filter::Util::Call> has been upgraded from version 1.58 to 1.59. =item * L<GDBM_File> has been upgraded from version 1.17 to 1.18. =item * L<HTTP::Tiny> has been upgraded from version 0.070 to 0.076. =item * L<I18N::Langinfo> has been upgraded from version 0.17 to 0.18. =item * L<IO> has been upgraded from version 1.39 to 1.40. =item * IO-Compress has been upgraded from version 2.074 to 2.084. Adds support for C<< IO::Uncompress::Zstd >> and C<< IO::Uncompress::UnLzip >>. The C<< BinModeIn >> and C<< BinModeOut >> options are now no-ops. ALL files will be read/written in binmode. =item * L<IPC::Cmd> has been upgraded from version 1.00 to 1.02. =item * L<JSON::PP> has been upgraded from version 2.97001 to 4.02. L<JSON::PP> as JSON::XS 4.0 enables C<allow_nonref> by default. =item * L<lib> has been upgraded from version 0.64 to 0.65. =item * L<Locale::Codes> has been upgraded from version 3.56 to 3.57. =item * L<Math::BigInt> has been upgraded from version 1.999811 to 1.999816. C<< bnok() >> now supports the full Kronenburg extension. L<[cpan #95628]|https://rt.cpan.org/Ticket/Display.html?id=95628>. =item * L<Math::BigInt::FastCalc> has been upgraded from version 0.5006 to 0.5008. =item * L<Math::BigRat> has been upgraded from version 0.2613 to 0.2614. =item * L<Module::CoreList> has been upgraded from version 5.20180622 to 5.20190520. Changes to B::Op_private and Config =item * L<Module::Load> has been upgraded from version 0.32 to 0.34. =item * L<Module::Metadata> has been upgraded from version 1.000033 to 1.000036. Properly clean up temporary directories after testing. =item * L<NDBM_File> has been upgraded from version 1.14 to 1.15. =item * L<Net::Ping> has been upgraded from version 2.62 to 2.71. =item * L<ODBM_File> has been upgraded from version 1.15 to 1.16. =item * PathTools has been upgraded from version 3.74 to 3.78. =item * L<parent> has been upgraded from version 0.236 to 0.237. =item * L<perl5db.pl> has been upgraded from version 1.54 to 1.55. Debugging threaded code no longer deadlocks in C<DB::sub> nor C<DB::lsub>. =item * L<perlfaq> has been upgraded from version 5.021011 to 5.20190126. =item * L<PerlIO::encoding> has been upgraded from version 0.26 to 0.27. Warnings enabled by setting the C<WARN_ON_ERR> flag in C<$PerlIO::encoding::fallback> are now only produced if warnings are enabled with C<use warnings "utf8";> or setting C<$^W>. =item * L<PerlIO::scalar> has been upgraded from version 0.29 to 0.30. =item * podlators has been upgraded from version 4.10 to 4.11. =item * L<POSIX> has been upgraded from version 1.84 to 1.88. =item * L<re> has been upgraded from version 0.36 to 0.37. =item * L<SDBM_File> has been upgraded from version 1.14 to 1.15. =item * L<sigtrap> has been upgraded from version 1.08 to 1.09. =item * L<Storable> has been upgraded from version 3.08 to 3.15. Storable no longer probes for recursion limits at build time. L<[perl #133708]|https://rt.perl.org/Ticket/Display.html?id=133708> and others. Metasploit exploit code was included to test for CVE-2015-1992 detection, this caused anti-virus detections on at least one AV suite. The exploit code has been removed and replaced with a simple functional test. L<[perl #133706]|https://rt.perl.org/Ticket/Display.html?id=133706> =item * L<Test::Simple> has been upgraded from version 1.302133 to 1.302162. =item * L<Thread::Queue> has been upgraded from version 3.12 to 3.13. =item * L<threads::shared> has been upgraded from version 1.58 to 1.60. Added support for extra tracing of locking, this requires a C<-DDEBUGGING> and extra compilation flags. =item * L<Time::HiRes> has been upgraded from version 1.9759 to 1.9760. =item * L<Time::Local> has been upgraded from version 1.25 to 1.28. =item * L<Time::Piece> has been upgraded from version 1.3204 to 1.33. =item * L<Unicode::Collate> has been upgraded from version 1.25 to 1.27. =item * L<Unicode::UCD> has been upgraded from version 0.70 to 0.72. =item * L<User::grent> has been upgraded from version 1.02 to 1.03. =item * L<utf8> has been upgraded from version 1.21 to 1.22. =item * L<vars> has been upgraded from version 1.04 to 1.05. C<vars.pm> no longer disables non-vars strict when checking if strict vars is enabled. L<[perl #130674]|https://rt.perl.org/Ticket/Display.html?id=130674>. =item * L<version> has been upgraded from version 0.9923 to 0.9924. =item * L<warnings> has been upgraded from version 1.42 to 1.44. =item * L<XS::APItest> has been upgraded from version 0.98 to 1.00. =item * L<XS::Typemap> has been upgraded from version 0.16 to 0.17. =back =head2 Removed Modules and Pragmata The following modules will be removed from the core distribution in a future release, and will at that time need to be installed from CPAN. Distributions on CPAN which require these modules will need to list them as prerequisites. The core versions of these modules will now issue C<"deprecated">-category warnings to alert you to this fact. To silence these deprecation warnings, install the modules in question from CPAN. Note that these are (with rare exceptions) fine modules that you are encouraged to continue to use. Their disinclusion from core primarily hinges on their necessity to bootstrapping a fully functional, CPAN-capable Perl installation, not usually on concerns over their design. =over 4 =item * B::Debug is no longer distributed with the core distribution. It continues to be available on CPAN as C<< L<B::Debug|https://metacpan.org/pod/B::Debug> >>. =item * Locale::Codes has been removed at the request of its author. It continues to be available on CPAN as C<< L<Locale::Codes|https://metacpan.org/pod/Locale::Codes> >> L<[perl #133458]|https://rt.perl.org/Ticket/Display.html?id=133458>. =back =head1 Documentation =head2 Changes to Existing Documentation We have attempted to update the documentation to reflect the changes listed in this document. If you find any we have missed, send email to L<perlbug@perl.org|mailto:perlbug@perl.org>. =head3 L<perlapi> =over 4 =item * C<AvFILL()> was wrongly listed as deprecated. This has been corrected. L<[perl #133278]|https://rt.perl.org/Ticket/Display.html?id=133278> =back =head3 L<perlop> =over 4 =item * We no longer have null (empty line) here doc terminators, so L<perlop> should not refer to them. =item * The behaviour of C<tr> when the delimiter is an apostrophe has been clarified. In particular, hyphens aren't special, and C<\x{}> isn't interpolated. L<[perl #130679]|https://rt.perl.org/Ticket/Display.html?id=130679> =back =head3 L<perlreapi>, L<perlvar> =over 4 =item * Improve docs for lastparen, lastcloseparen. =back =head3 L<perlfunc> =over 4 =item * The entry for L<perlfunc/-X> has been clarified to indicate that symbolic links are followed for most tests. =item * Clarification of behaviour of C<reset EXPR>. =item * Try to clarify that C<< ref(qr/xx/) >> returns C<Regexp> rather than C<REGEXP> and why. L<[perl #133751]|https://rt.perl.org/Ticket/Display.html?id=133751>. =back =head3 L<perlreref> =over 4 =item * Clarification of the syntax of /(?(cond)yes)/. =back =head3 L<perllocale> =over 4 =item * There are actually two slightly different types of UTF-8 locales: one for Turkic languages and one for everything else. Starting in Perl v5.30, Perl seamlessly handles both types. =back =head3 L<perlrecharclass> =over 4 =item * Added a note for the ::xdigit:: character class. =back =head3 L<perlvar> =over 4 =item * More specific documentation of paragraph mode. L<[perl #133722]|https://rt.perl.org/Ticket/Display.html?id=133722>. =back =head1 Diagnostics The following additions or changes have been made to diagnostic output, including warnings and fatal error messages. For the complete list of diagnostic messages, see L<perldiag>. =head2 Changes to Existing Diagnostics =over 4 =item * As noted under L<Incompatible Changes> above, the deprecation warning "Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by S<<-- HERE> in m/%s/" has been changed to the non-deprecation warning "Unescaped left brace in regex is passed through in regex; marked by S<<-- HERE> in m/%s/". =item * Specifying C<\o{}> without anything between the braces now yields the fatal error message "Empty \o{}". Previously it was "Number with no digits". This means the same wording is used for this kind of error as with similar constructs such as C<\p{}>. =item * Within the scope of the experimental feature C<use re 'strict'>, specifying C<\x{}> without anything between the braces now yields the fatal error message "Empty \x{}". Previously it was "Number with no digits". This means the same wording is used for this kind of error as with similar constructs such as C<\p{}>. It is legal, though not wise to have an empty C<\x> outside of C<re 'strict'>; it silently generates a NUL character. =item * L<Type of arg %d to %s must be %s (not %s)|perldiag/"Type of arg %d to %s must be %s (not %s)"> Attempts to push, pop, etc on a hash or glob now produce this message rather than complaining that they no longer work on scalars. L<[perl #130367]|https://rt.perl.org/Ticket/Display.html?id=130367>. =item * L<Prototype not terminated|perldiag/"Prototype not terminated"> The file and line number is now reported for this error. L<[perl #133524]|https://rt.perl.org/Ticket/Display.html?id=133524> =item * Under C<< -Dr >> (or C<< use re 'Debug' >>) the compiled regex engine program is displayed. It used to use two different spellings for I<< infinity >>, C<< INFINITY >>, and C<< INFTY >>. It now uses the latter exclusively, as that spelling has been around the longest. =back =head1 Utility Changes =head2 L<xsubpp> =over 4 =item * The generated prototype (with C<< PROTOTYPES: ENABLE >>) would include C<< OUTLIST >> parameters, but these aren't arguments to the perl function. This has been rectified. L<[perl #133654]|https://rt.perl.org/Ticket/Display.html?id=133654>. =back =head1 Configuration and Compilation =over 4 =item * Normally the thread-safe locale functions are used only on threaded builds. It is now possible to force their use on unthreaded builds on systems that have them available, by including the C<-Accflags='-DUSE_THREAD_SAFE_LOCALE'> option to F<Configure>. =item * Improve detection of memrchr, strlcat, and strlcpy =item * Improve Configure detection of memmem(). L<[perl #133760]|https://rt.perl.org/Ticket/Display.html?id=133760>. =item * Multiple improvements and fixes for -DPERL_GLOBAL_STRUCT build option. =item * Fix -DPERL_GLOBAL_STRUCT_PRIVATE build option. =back =head1 Testing =over 4 =item * F<t/lib/croak/op> L<[perl #130367]|https://rt.perl.org/Ticket/Display.html?id=130367>. separate error for C<push>, etc. on hash/glob. =item * F<t/op/svleak.t> L<[perl #133660]|https://rt.perl.org/Ticket/Display.html?id=133660>. Add test for C<goto &sub> in overload leaking. =item * Split F<t/re/fold_grind.t> into multiple test files. =item * Fix intermittent tests which failed due to race conditions which surface during parallel testing. L<[perl #133740]|https://rt.perl.org/Ticket/Display.html?id=133740>. =item * Thoroughly test paragraph mode, using a new test file, F<t/io/paragraph_mode.t>. L<[perl #133722]|https://rt.perl.org/Ticket/Display.html?id=133722>. =item * Some tests in F<< t/io/eintr.t >> caused the process to hang on pre-16 Darwin. These tests are skipped for those version of Darwin. =back =head1 Platform Support =head2 Platform-Specific Notes =over 4 =item HP-UX 11.11 An obscure problem in C<pack()> when compiling with HP C-ANSI-C has been fixed by disabling optimizations in F<pp_pack.c>. =item Mac OS X Perl's build and testing process on Mac OS X for C<-Duseshrplib> builds is now compatible with Mac OS X System Integrity Protection (SIP). SIP prevents binaries in F</bin> (and a few other places) being passed the C<DYLD_LIBRARY_PATH> environment variable. For our purposes this prevents C<DYLD_LIBRARY_PATH> from being passed to the shell, which prevents that variable being passed to the testing or build process, so running C<perl> couldn't find F<libperl.dylib>. To work around that, the initial build of the F<perl> executable expects to find F<libperl.dylib> in the build directory, and the library path is then adjusted during installation to point to the installed library. L<[perl #126706]|https://rt.perl.org/Ticket/Display.html?id=126706>. =item Minix3 Some support for Minix3 has been re-added. =item Cygwin Cygwin doesn't make C<< cuserid >> visible. =item Win32 Mingw C99 math functions are now available. =item Windows =over 4 =item * The C<USE_CPLUSPLUS> build option which has long been available in F<win32/Makefile> (for B<nmake>) and F<win32/makefile.mk> (for B<dmake>) is now also available in F<win32/GNUmakefile> (for B<gmake>). =item * The B<nmake> makefile no longer defaults to Visual C++ 6.0 (a very old version which is unlikely to be widely used today). As a result, it is now a requirement to specify the C<CCTYPE> since there is no obvious choice of which modern version to default to instead. Failure to specify C<CCTYPE> will result in an error being output and the build will stop. (The B<dmake> and B<gmake> makefiles will automatically detect which compiler is being used, so do not require C<CCTYPE> to be set. This feature has not yet been added to the B<nmake> makefile.) =item * C<sleep()> with warnings enabled for a C<USE_IMP_SYS> build no longer warns about the sleep timeout being too large. L<[perl #133376]|https://rt.perl.org/Ticket/Display.html?id=133376>. =item * Support for compiling perl on Windows using Microsoft Visual Studio 2019 (containing Visual C++ 14.2) has been added. =item * socket() now sets C<$!> if the protocol, address family and socket type combination is not found. L<[perl #133853]|https://rt.perl.org/Ticket/Display.html?id=133853>. =item * The Windows Server 2003 SP1 Platform SDK build, with its early x64 compiler and tools, was accidentally broken in Perl 5.27.9. This has now been fixed. =back =back =head1 Internal Changes =over 4 =item * The sizing pass has been eliminated from the regular expression compiler. An extra pass may instead be needed in some cases to count the number of parenthetical capture groups. =item * A new function L<perlapi/C<my_strtod>> or its synonym, Strtod(), is now available with the same signature as the libc strtod(). It provides strotod() equivalent behavior on all platforms, using the best available precision, depending on platform capabilities and F<Configure> options, while handling locale-related issues, such as if the radix character should be a dot or comma. =item * Added C<newSVsv_nomg()> to copy a SV without processing get magic on the source. L<[perl #132964]|https://rt.perl.org/Ticket/Display.html?id=132964>. =item * It is now forbidden to malloc more than C<PTRDIFF_T_MAX> bytes. Much code (including C optimizers) assumes that all data structures will not be larger than this, so this catches such attempts before overflow happens. =item * Two new regnodes have been introduced C<< EXACT_ONLY8 >>, and C<< EXACTFU_ONLY8 >>. They're equivalent to C<< EXACT >> and C<< EXACTFU >>, except that they contain a code point which requires UTF-8 to represent/match. Hence, if the target string isn't UTF-8, we know it can't possibly match, without needing to try. =item * C<< print_bytes_for_locale() >> is now defined if C<< DEBUGGING >>, Prior, it didn't get defined unless C<< LC_COLLATE >> was defined on the platform. =back =head1 Selected Bug Fixes =over 4 =item * Compilation under C<-DPERL_MEM_LOG> and C<-DNO_LOCALE> have been fixed. =item * Perl 5.28 introduced an C<index()> optimization when comparing to -1 (or indirectly, e.g. >= 0). When this optimization was triggered inside a C<when> clause it caused a warning ("Argument %s isn't numeric in smart match"). This has now been fixed. L<[perl #133368]|https://rt.perl.org/Ticket/Display.html?id=133368> =item * The new in-place editing code no longer leaks directory handles. L<[perl #133314]|https://rt.perl.org/Ticket/Display.html?id=133314>. =item * Warnings produced from constant folding operations on overloaded values no longer produce spurious "Use of uninitialized value" warnings. L<[perl #132683]|https://rt.perl.org/Ticket/Display.html?id=132683>. =item * Fix for "mutator not seen in (lex = ...) .= ..." L<[perl #133441]|https://rt.perl.org/Ticket/Display.html?id=133441>. =item * C<pack "u", "invalid uuencoding"> now properly NUL terminates the zero-length SV produced. L<[perl #132655]|https://rt.perl.org/Ticket/Display.html?id=132655>. =item * Improve the debugging output for calloc() calls with C<-Dm>. L<[perl #133439]|https://rt.perl.org/Ticket/Display.html?id=133439>. =item * Regexp script runs were failing to permit ASCII digits in some cases. L<[perl #133547]|https://rt.perl.org/Ticket/Display.html?id=133547>. =item * On Unix-like systems supporting a platform-specific technique for determining L<< C<$^X>|perlvar/$^X >>, Perl failed to fall back to the generic technique when the platform-specific one fails (for example, a Linux system with /proc not mounted). This was a regression in Perl 5.28.0. L<[perl #133573]|https://rt.perl.org/Ticket/Display.html?id=133573>. =item * L<SDBM_File> is now more robust with corrupt database files. The improvements do not make SDBM files suitable as an interchange format. L<[perl #132147]|https://rt.perl.org/Ticket/Display.html?id=132147>. =item * C<binmode($fh);> or C<binmode($fh, ':raw');> now properly removes the C<:utf8> flag from the default C<:crlf> I/O layer on Win32. L<[perl #133604]|https://rt.perl.org/Ticket/Display.html?id=133604>. =item * The experimental reference aliasing feature was misinterpreting array and hash slice assignment as being localised, e.g. \(@a[3,5,7]) = \(....); was being interpreted as: local \(@a[3,5,7]) = \(....); L<[perl #133538]|https://rt.perl.org/Ticket/Display.html?id=133538>. =item * C<sort SUBNAME> within an C<eval EXPR> when C<EXPR> was UTF-8 upgraded could panic if the C<SUBNAME> was non-ASCII. L<[perl #134061]|https://rt.perl.org/Ticket/Display.html?id=134061>. =item * Correctly handle realloc() modifying C<errno> on success so that the modification isn't visible to the perl user, since realloc() is called implicitly by the interpreter. This modification is permitted by the C standard, but has only been observed on FreeBSD 13.0-CURRENT. L<[perl #133958]|https://rt.perl.org/Ticket/Display.html?id=133958>. =item * Perl now exposes POSIX C<getcwd> as C<Internals::getcwd()> if available. This is intended for use by C<Cwd.pm> during bootstrapping and may be removed or changed without notice. This fixes some bootstrapping issues while building perl in a directory where some ancestor directory isn't readable. L<[perl #133951]|https://rt.perl.org/Ticket/Display.html?id=133951>. =item * C<pack()> no longer can return malformed UTF-8. It croaks if it would otherwise return a UTF-8 string that contains malformed UTF-8. This protects against potential security threats. L<[perl #131642]|https://rt.perl.org/Ticket/Display.html?id=131642>. =item * See L</Any set of digits in the Common script are legal in a script run of another script>. =item * Regular expression matching no longer leaves stale UTF-8 length magic when updating C<$^R>. This could result in C<length($^R)> returning an incorrect value. =item * Reduce recursion on ops L<[perl #108276]|https://rt.perl.org/Ticket/Display.html?id=108276>. This can prevent stack overflow when processing extremely deep op trees. =item * Avoid leak in multiconcat with overloading. L<[perl #133789]|https://rt.perl.org/Ticket/Display.html?id=133789>. =item * The handling of user-defined C<\p{}> properties (see L<perlunicode/User-Defined Character Properties>) has been rewritten to be in C (instead of Perl). This speeds things up, but in the process several inconsistencies and bug fixes are made. =over 4 =item 1 A few error messages have minor wording changes. This is essentially because the new way is integrated into the regex error handling mechanism that marks the position in the input at which the error occurred. That was not possible previously. The messages now also contain additional back-trace-like information in case the error occurs deep in nested calls. =item 2 A user-defined property is implemented as a perl subroutine with certain highly constrained naming conventions. It was documented previously that the sub would be in the current package if the package was unspecified. This turned out not to be true in all cases, but now it is. =item 3 All recursive calls are treated as infinite recursion. Previously they would cause the interpreter to panic. Now, they cause the regex pattern to fail to compile. =item 4 Similarly, any other error likely would lead to a panic; now to just the pattern failing to compile. =item 5 The old mechanism did not detect illegal ranges in the definition of the property. Now, the range max must not be smaller than the range min. Otherwise, the pattern fails to compile. =item 6 The intention was to have each sub called only once during the lifetime of the program, so that a property's definition is immutable. This was relaxed so that it could be called once for all /i compilations, and potentially a second time for non-/i (the sub is passed a parameter indicating which). However, in practice there were instances when this was broken, and multiple calls were possible. Those have been fixed. Now (besides the /i,non-/i cases) the only way a sub can be called multiple times is if some component of it has not been defined yet. For example, suppose we have sub IsA() whose definition is known at compile time, and it in turn calls isB() whose definition is not yet known. isA() will be called each time a pattern it appears in is compiled. If isA() also calls isC() and that definition is known, isC() will be called just once. =item 7 There were some races and very long hangs should one thread be compiling the same property as another simultaneously. These have now been fixed. =back =item * Fixed a failure to match properly. An EXACTFish regnode has a finite length it can hold for the string being matched. If that length is exceeded, a second node is used for the next segment of the string, for as many regnodes as are needed. Care has to be taken where to break the string, in order to deal multi-character folds in Unicode correctly. If we want to break a string at a place which could potentially be in the middle of a multi-character fold, we back off one (or more) characters, leaving a shorter EXACTFish regnode. This backing off mechanism contained an off-by-one error. L<[perl #133756]|https://rt.perl.org/Ticket/Display.html?id=133756>. =item * A bare C<eof> call with no previous file handle now returns true. L<[perl #133721]|https://rt.perl.org/Ticket/Display.html?id=133721> =item * Failing to compile a format now aborts compilation. Like other errors in sub-parses this could leave the parser in a strange state, possibly crashing perl if compilation continued. L<[perl #132158]|https://rt.perl.org/Ticket/Display.html?id=132158> =item * If an in-place edit is still in progress during global destruction and the process exit code (as stored in C<$?>) is zero, perl will now treat the in-place edit as successful, replacing the input file with any output produced. This allows code like: perl -i -ne 'print "Foo"; last' to replace the input file, while code like: perl -i -ne 'print "Foo"; die' will not. Partly resolves L<[perl #133659]|https://rt.perl.org/Ticket/Display.html?id=133659>. =item * A regression in 5.28 caused the following code to fail close(STDIN); open(CHILD, "|wc -l")' because the child's stdin would be closed on exec. This has now been fixed. =item * Fixed an issue where compiling a regexp containing both compile-time and run-time code blocks could lead to trying to compile something which is invalid syntax. =item * Fixed build failures with C<< -DNO_LOCALE_NUMERIC >> and C<< -DNO_LOCALE_COLLATE >>. L<[perl #133696]|https://rt.perl.org/Ticket/Display.html?id=133696>. =item * Prevent the tests in F<< ext/B/t/strict.t >> from being skipped. L<[perl #133713]|https://rt.perl.org/Ticket/Display.html?id=133713>. =item * C<< /di >> nodes ending or beginning in I<s> are now C<< EXACTF >>. We do not want two C<< EXACTFU >> to be joined together during optimization, and to form a C<< ss >>, C<< sS >>, C<< Ss >> or C<< SS >> sequence; they are the only multi-character sequences which may match differently under C<< /ui >> and C<< /di >>. =back =head1 Acknowledgements Perl 5.30.0 represents approximately 11 months of development since Perl 5.28.0 and contains approximately 620,000 lines of changes across 1,300 files from 58 authors. Excluding auto-generated files, documentation and release tools, there were approximately 510,000 lines of changes to 750 .pm, .t, .c and .h files. Perl continues to flourish into its fourth decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.30.0: Aaron Crane, Abigail, Alberto Simões, Alexandr Savca, Andreas König, Andy Dougherty, Aristotle Pagaltzis, Brian Greenfield, Chad Granum, Chris 'BinGOs' Williams, Craig A. Berry, Dagfinn Ilmari Mannsåker, Dan Book, Dan Dedrick, Daniel Dragan, Dan Kogai, David Cantrell, David Mitchell, Dominic Hargreaves, E. Choroba, Ed J, Eugen Konkov, François Perrad, Graham Knop, Hauke D, H.Merijn Brand, Hugo van der Sanden, Jakub Wilk, James Clarke, James E Keenan, Jerry D. Hedden, Jim Cromie, John SJ Anderson, Karen Etheridge, Karl Williamson, Leon Timmermans, Matthias Bethke, Nicholas Clark, Nicolas R., Niko Tyni, Pali, Petr Písař, Phil Pearl (Lobbes), Richard Leach, Ryan Voots, Sawyer X, Shlomi Fish, Sisyphus, Slaven Rezic, Steve Hay, Sullivan Beck, Tina Müller, Tomasz Konojacki, Tom Wyant, Tony Cook, Unicode Consortium, Yves Orton, Zak B. Elep. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of most of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Noteworthy in this release were the large number of bug fixes made possible by Sergey Aleynikov's high quality perlbug reports for issues he discovered by fuzzing with AFL. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the perl bug database at L<https://rt.perl.org/>. There may also be information at L<http://www.perl.org/>, the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications which make it inappropriate to send to a publicly archived mailing list, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 Give Thanks If you wish to thank the Perl 5 Porters for the work we had done in Perl 5, you can do so by running the C<perlthanks> program: perlthanks This will send an email to the Perl 5 Porters list with your show of thanks. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlboot.pod 0000644 00000000446 15125556335 0007114 0 ustar 00 =encoding utf8 =head1 NAME perlboot - Links to information on object-oriented programming in Perl =head1 DESCRIPTION For information on OO programming with Perl, please see L<perlootut> and L<perlobj>. (The above documents supersede the tutorial that was formerly here in perlboot.) =cut perlhack.pod 0000644 00000124225 15125556335 0007061 0 ustar 00 =encoding utf8 =for comment Consistent formatting of this file is achieved with: perl ./Porting/podtidy pod/perlhack.pod =head1 NAME perlhack - How to hack on Perl =head1 DESCRIPTION This document explains how Perl development works. It includes details about the Perl 5 Porters email list, the Perl repository, the Perl bug tracker, patch guidelines, and commentary on Perl development philosophy. =head1 SUPER QUICK PATCH GUIDE If you just want to submit a single small patch like a pod fix, a test for a bug, comment fixes, etc., it's easy! Here's how: =over 4 =item * Check out the source repository The perl source is in a git repository. You can clone the repository with the following command: % git clone https://github.com/Perl/perl5.git perl =item * Ensure you're following the latest advice In case the advice in this guide has been updated recently, read the latest version directly from the perl source: % perldoc pod/perlhack.pod =item * Create a branch for your change Create a branch based on blead to commit your change to, which will later be used to send it to the Perl issue tracker. % git checkout -b mychange =item * Make your change Hack, hack, hack. Keep in mind that Perl runs on many different platforms, with different operating systems that have different capabilities, different filesystem organizations, and even different character sets. L<perlhacktips> gives advice on this. =item * Test your change You can run all the tests with the following commands: % ./Configure -des -Dusedevel % make test Keep hacking until the tests pass. =item * Commit your change Committing your work will save the change I<on your local system>: % git commit -a -m 'Commit message goes here' Make sure the commit message describes your change in a single sentence. For example, "Fixed spelling errors in perlhack.pod". =item * Send your change to the Perl issue tracker The next step is to submit your patch to the Perl core ticket system. Create a GitHub fork of the perl5 repository and add it as a remote, if you haven't already, as described in the GitHub documentation at L<https://help.github.com/en/articles/working-with-forks>. % git remote add fork git@github.com:MyUser/perl5.git Then, push your new branch to your fork. % git push -u fork mychange Finally, create a Pull Request on GitHub from your branch to blead as described in the GitHub documentation at L<https://help.github.com/en/articles/creating-a-pull-request-from-a-fork>. =item * Thank you The porters appreciate the time you spent helping to make Perl better. Thank you! =item * Acknowledgement All contributors are credited (by name and email address) in the AUTHORS file, which is part of the perl distribution, as well as the Git commit history. If you don’t want to be included in the AUTHORS file, just let us know. Otherwise we will take your submission of a patch as permission to credit you in the AUTHORS file. =item * Next time The next time you wish to make a patch, you need to start from the latest perl in a pristine state. Check you don't have any local changes or added files in your perl check-out which you wish to keep, then run these commands: % git checkout blead % git pull % git reset --hard origin/blead % git clean -dxf =back =head1 BUG REPORTING If you want to report a bug in Perl, or browse existing Perl bugs and patches, use the GitHub issue tracker at L<https://github.com/perl/perl5/issues>. Please check the archive of the perl5-porters list (see below) and/or the bug tracking system before submitting a bug report. Often, you'll find that the bug has been reported already. You can log in to the bug tracking system and comment on existing bug reports. If you have additional information regarding an existing bug, please add it. This will help the porters fix the bug. =head1 PERL 5 PORTERS The perl5-porters (p5p) mailing list is where the Perl standard distribution is maintained and developed. The people who maintain Perl are also referred to as the "Perl 5 Porters", "p5p" or just the "porters". A searchable archive of the list is available at L<https://markmail.org/search/?q=perl5-porters>. There is also an archive at L<https://archive.develooper.com/perl5-porters@perl.org/>. =head2 perl-changes mailing list The perl5-changes mailing list receives a copy of each patch that gets submitted to the maintenance and development branches of the perl repository. See L<https://lists.perl.org/list/perl5-changes.html> for subscription and archive information. =head2 #p5p on IRC Many porters are also active on the L<irc://irc.perl.org/#p5p> channel. Feel free to join the channel and ask questions about hacking on the Perl core. =head1 GETTING THE PERL SOURCE All of Perl's source code is kept centrally in a Git repository at I<github.com>. The repository contains many Perl revisions from Perl 1 onwards and all the revisions from Perforce, the previous version control system. For much more detail on using git with the Perl repository, please see L<perlgit>. =head2 Read access via Git You will need a copy of Git for your computer. You can fetch a copy of the repository using the git protocol: % git clone git://github.com/Perl/perl5.git perl This clones the repository and makes a local copy in the F<perl> directory. If you cannot use the git protocol for firewall reasons, you can also clone via http: % git clone https://github.com/Perl/perl5.git perl =head2 Read access via the web You may access the repository over the web. This allows you to browse the tree, see recent commits, subscribe to repository notifications, search for particular commits and more. You may access it at L<https://github.com/Perl/perl5>. =head2 Read access via rsync You can also choose to use rsync to get a copy of the current source tree for the bleadperl branch and all maintenance branches: % rsync -avz rsync://perl5.git.perl.org/perl-current . % rsync -avz rsync://perl5.git.perl.org/perl-5.12.x . % rsync -avz rsync://perl5.git.perl.org/perl-5.10.x . % rsync -avz rsync://perl5.git.perl.org/perl-5.8.x . % rsync -avz rsync://perl5.git.perl.org/perl-5.6.x . % rsync -avz rsync://perl5.git.perl.org/perl-5.005xx . (Add the C<--delete> option to remove leftover files.) To get a full list of the available sync points: % rsync perl5.git.perl.org:: =head2 Write access via git If you have a commit bit, please see L<perlgit> for more details on using git. =head1 PATCHING PERL If you're planning to do more extensive work than a single small fix, we encourage you to read the documentation below. This will help you focus your work and make your patches easier to incorporate into the Perl source. =head2 Submitting patches If you have a small patch to submit, please submit it via the GitHub Pull Request workflow. You may also send patches to the p5p list. Patches are reviewed and discussed on GitHub or the p5p list. Simple, uncontroversial patches will usually be applied without any discussion. When the patch is applied, the ticket will be updated and you will receive email. In other cases, the patch will need more work or discussion. You are encouraged to participate in the discussion and advocate for your patch. Sometimes your patch may get lost in the shuffle. It's appropriate to send a reminder email to p5p if no action has been taken in a month. Please remember that the Perl 5 developers are all volunteers, and be polite. Changes are always applied directly to the main development branch, called "blead". Some patches may be backported to a maintenance branch. If you think your patch is appropriate for the maintenance branch (see L<perlpolicy/MAINTENANCE BRANCHES>), please explain why when you submit it. =head2 Getting your patch accepted If you are submitting a code patch there are several things that you can do to help the Perl 5 Porters accept your patch. =head3 Patch style Using the GitHub Pull Request workflow, your patch will automatically be available in a suitable format. If you wish to submit a patch to the p5p list for review, make sure to create it appropriately. If you used git to check out the Perl source, then using C<git format-patch> will produce a patch in a style suitable for Perl. The C<format-patch> command produces one patch file for each commit you made. If you prefer to send a single patch for all commits, you can use C<git diff>. % git checkout blead % git pull % git diff blead my-branch-name This produces a patch based on the difference between blead and your current branch. It's important to make sure that blead is up to date before producing the diff, that's why we call C<git pull> first. We strongly recommend that you use git if possible. It will make your life easier, and ours as well. However, if you're not using git, you can still produce a suitable patch. You'll need a pristine copy of the Perl source to diff against. The porters prefer unified diffs. Using GNU C<diff>, you can produce a diff like this: % diff -Npurd perl.pristine perl.mine Make sure that you C<make realclean> in your copy of Perl to remove any build artifacts, or you may get a confusing result. =head3 Commit message As you craft each patch you intend to submit to the Perl core, it's important to write a good commit message. This is especially important if your submission will consist of a series of commits. The first line of the commit message should be a short description without a period. It should be no longer than the subject line of an email, 50 characters being a good rule of thumb. A lot of Git tools (Gitweb, GitHub, git log --pretty=oneline, ...) will only display the first line (cut off at 50 characters) when presenting commit summaries. The commit message should include a description of the problem that the patch corrects or new functionality that the patch adds. As a general rule of thumb, your commit message should help a programmer who knows the Perl core quickly understand what you were trying to do, how you were trying to do it, and why the change matters to Perl. =over 4 =item * Why Your commit message should describe why the change you are making is important. When someone looks at your change in six months or six years, your intent should be clear. If you're deprecating a feature with the intent of later simplifying another bit of code, say so. If you're fixing a performance problem or adding a new feature to support some other bit of the core, mention that. =item * What Your commit message should describe what part of the Perl core you're changing and what you expect your patch to do. =item * How While it's not necessary for documentation changes, new tests or trivial patches, it's often worth explaining how your change works. Even if it's clear to you today, it may not be clear to a porter next month or next year. =back A commit message isn't intended to take the place of comments in your code. Commit messages should describe the change you made, while code comments should describe the current state of the code. If you've just implemented a new feature, complete with doc, tests and well-commented code, a brief commit message will often suffice. If, however, you've just changed a single character deep in the parser or lexer, you might need to write a small novel to ensure that future readers understand what you did and why you did it. =head3 Comments, Comments, Comments Be sure to adequately comment your code. While commenting every line is unnecessary, anything that takes advantage of side effects of operators, that creates changes that will be felt outside of the function being patched, or that others may find confusing should be documented. If you are going to err, it is better to err on the side of adding too many comments than too few. The best comments explain I<why> the code does what it does, not I<what it does>. =head3 Style In general, please follow the particular style of the code you are patching. In particular, follow these general guidelines for patching Perl sources: =over 4 =item * 4-wide indents for code, 2-wide indents for nested CPP C<#define>s, with 8-wide tabstops. =item * Use spaces for indentation, not tab characters. The codebase is a mixture of tabs and spaces for indentation, and we are moving to spaces only. Converting lines you're patching from 8-wide tabs to spaces will help this migration. =item * Try hard not to exceed 79-columns =item * ANSI C prototypes =item * Uncuddled elses and "K&R" style for indenting control constructs =item * No C++ style (//) comments =item * Mark places that need to be revisited with XXX (and revisit often!) =item * Opening brace lines up with "if" when conditional spans multiple lines; should be at end-of-line otherwise =item * In function definitions, name starts in column 0 (return value-type is on previous line) =item * Single space after keywords that are followed by parens, no space between function name and following paren =item * Avoid assignments in conditionals, but if they're unavoidable, use extra paren, e.g. "if (a && (b = c)) ..." =item * "return foo;" rather than "return(foo);" =item * "if (!foo) ..." rather than "if (foo == FALSE) ..." etc. =item * Do not declare variables using "register". It may be counterproductive with modern compilers, and is deprecated in C++, under which the Perl source is regularly compiled. =item * In-line functions that are in headers that are accessible to XS code need to be able to compile without warnings with commonly used extra compilation flags, such as gcc's C<-Wswitch-default> which warns whenever a switch statement does not have a "default" case. The use of these extra flags is to catch potential problems in legal C code, and is often used by Perl aggregators, such as Linux distributors. =back =head3 Test suite If your patch changes code (rather than just changing documentation), you should also include one or more test cases which illustrate the bug you're fixing or validate the new functionality you're adding. In general, you should update an existing test file rather than create a new one. Your test suite additions should generally follow these guidelines (courtesy of Gurusamy Sarathy <gsar@activestate.com>): =over 4 =item * Know what you're testing. Read the docs, and the source. =item * Tend to fail, not succeed. =item * Interpret results strictly. =item * Use unrelated features (this will flush out bizarre interactions). =item * Use non-standard idioms (otherwise you are not testing TIMTOWTDI). =item * Avoid using hardcoded test numbers whenever possible (the EXPECTED/GOT found in t/op/tie.t is much more maintainable, and gives better failure reports). =item * Give meaningful error messages when a test fails. =item * Avoid using qx// and system() unless you are testing for them. If you do use them, make sure that you cover _all_ perl platforms. =item * Unlink any temporary files you create. =item * Promote unforeseen warnings to errors with $SIG{__WARN__}. =item * Be sure to use the libraries and modules shipped with the version being tested, not those that were already installed. =item * Add comments to the code explaining what you are testing for. =item * Make updating the '1..42' string unnecessary. Or make sure that you update it. =item * Test _all_ behaviors of a given operator, library, or function. Test all optional arguments. Test return values in various contexts (boolean, scalar, list, lvalue). Use both global and lexical variables. Don't forget the exceptional, pathological cases. =back =head2 Patching a core module This works just like patching anything else, with one extra consideration. Modules in the F<cpan/> directory of the source tree are maintained outside of the Perl core. When the author updates the module, the updates are simply copied into the core. See that module's documentation or its listing on L<https://metacpan.org/> for more information on reporting bugs and submitting patches. In most cases, patches to modules in F<cpan/> should be sent upstream and should not be applied to the Perl core individually. If a patch to a file in F<cpan/> absolutely cannot wait for the fix to be made upstream, released to CPAN and copied to blead, you must add (or update) a C<CUSTOMIZED> entry in the F<"Porting/Maintainers.pl"> file to flag that a local modification has been made. See F<"Porting/Maintainers.pl"> for more details. In contrast, modules in the F<dist/> directory are maintained in the core. =head2 Updating perldelta For changes significant enough to warrant a F<pod/perldelta.pod> entry, the porters will greatly appreciate it if you submit a delta entry along with your actual change. Significant changes include, but are not limited to: =over 4 =item * Adding, deprecating, or removing core features =item * Adding, deprecating, removing, or upgrading core or dual-life modules =item * Adding new core tests =item * Fixing security issues and user-visible bugs in the core =item * Changes that might break existing code, either on the perl or C level =item * Significant performance improvements =item * Adding, removing, or significantly changing documentation in the F<pod/> directory =item * Important platform-specific changes =back Please make sure you add the perldelta entry to the right section within F<pod/perldelta.pod>. More information on how to write good perldelta entries is available in the C<Style> section of F<Porting/how_to_write_a_perldelta.pod>. =head2 What makes for a good patch? New features and extensions to the language can be contentious. There is no specific set of criteria which determine what features get added, but here are some questions to consider when developing a patch: =head3 Does the concept match the general goals of Perl? Our goals include, but are not limited to: =over 4 =item 1. Keep it fast, simple, and useful. =item 2. Keep features/concepts as orthogonal as possible. =item 3. No arbitrary limits (platforms, data sizes, cultures). =item 4. Keep it open and exciting to use/patch/advocate Perl everywhere. =item 5. Either assimilate new technologies, or build bridges to them. =back =head3 Where is the implementation? All the talk in the world is useless without an implementation. In almost every case, the person or people who argue for a new feature will be expected to be the ones who implement it. Porters capable of coding new features have their own agendas, and are not available to implement your (possibly good) idea. =head3 Backwards compatibility It's a cardinal sin to break existing Perl programs. New warnings can be contentious--some say that a program that emits warnings is not broken, while others say it is. Adding keywords has the potential to break programs, changing the meaning of existing token sequences or functions might break programs. The Perl 5 core includes mechanisms to help porters make backwards incompatible changes more compatible such as the L<feature> and L<deprecate> modules. Please use them when appropriate. =head3 Could it be a module instead? Perl 5 has extension mechanisms, modules and XS, specifically to avoid the need to keep changing the Perl interpreter. You can write modules that export functions, you can give those functions prototypes so they can be called like built-in functions, you can even write XS code to mess with the runtime data structures of the Perl interpreter if you want to implement really complicated things. Whenever possible, new features should be prototyped in a CPAN module before they will be considered for the core. =head3 Is the feature generic enough? Is this something that only the submitter wants added to the language, or is it broadly useful? Sometimes, instead of adding a feature with a tight focus, the porters might decide to wait until someone implements the more generalized feature. =head3 Does it potentially introduce new bugs? Radical rewrites of large chunks of the Perl interpreter have the potential to introduce new bugs. =head3 How big is it? The smaller and more localized the change, the better. Similarly, a series of small patches is greatly preferred over a single large patch. =head3 Does it preclude other desirable features? A patch is likely to be rejected if it closes off future avenues of development. For instance, a patch that placed a true and final interpretation on prototypes is likely to be rejected because there are still options for the future of prototypes that haven't been addressed. =head3 Is the implementation robust? Good patches (tight code, complete, correct) stand more chance of going in. Sloppy or incorrect patches might be placed on the back burner until fixes can be made, or they might be discarded altogether without further notice. =head3 Is the implementation generic enough to be portable? The worst patches make use of system-specific features. It's highly unlikely that non-portable additions to the Perl language will be accepted. =head3 Is the implementation tested? Patches which change behaviour (fixing bugs or introducing new features) must include regression tests to verify that everything works as expected. Without tests provided by the original author, how can anyone else changing perl in the future be sure that they haven't unwittingly broken the behaviour the patch implements? And without tests, how can the patch's author be confident that his/her hard work put into the patch won't be accidentally thrown away by someone in the future? =head3 Is there enough documentation? Patches without documentation are probably ill-thought out or incomplete. No features can be added or changed without documentation, so submitting a patch for the appropriate pod docs as well as the source code is important. =head3 Is there another way to do it? Larry said "Although the Perl Slogan is I<There's More Than One Way to Do It>, I hesitate to make 10 ways to do something". This is a tricky heuristic to navigate, though--one man's essential addition is another man's pointless cruft. =head3 Does it create too much work? Work for the committers, work for Perl programmers, work for module authors, ... Perl is supposed to be easy. =head3 Patches speak louder than words Working code is always preferred to pie-in-the-sky ideas. A patch to add a feature stands a much higher chance of making it to the language than does a random feature request, no matter how fervently argued the request might be. This ties into "Will it be useful?", as the fact that someone took the time to make the patch demonstrates a strong desire for the feature. =head1 TESTING The core uses the same testing style as the rest of Perl, a simple "ok/not ok" run through Test::Harness, but there are a few special considerations. There are three ways to write a test in the core: L<Test::More>, F<t/test.pl> and ad hoc C<print $test ? "ok 42\n" : "not ok 42\n">. The decision of which to use depends on what part of the test suite you're working on. This is a measure to prevent a high-level failure (such as Config.pm breaking) from causing basic functionality tests to fail. The F<t/test.pl> library provides some of the features of L<Test::More>, but avoids loading most modules and uses as few core features as possible. If you write your own test, use the L<Test Anything Protocol|https://testanything.org>. =over 4 =item * F<t/base>, F<t/comp> and F<t/opbasic> Since we don't know if C<require> works, or even subroutines, use ad hoc tests for these three. Step carefully to avoid using the feature being tested. Tests in F<t/opbasic>, for instance, have been placed there rather than in F<t/op> because they test functionality which F<t/test.pl> presumes has already been demonstrated to work. =item * All other subdirectories of F<t/> Now that basic require() and subroutines are tested, you can use the F<t/test.pl> library. You can also use certain libraries like L<Config> conditionally, but be sure to skip the test gracefully if it's not there. =item * Test files not found under F<t/> This category includes F<.t> files underneath directories such as F<dist>, F<ext> and F<lib>. Since the core of Perl has now been tested, L<Test::More> can and now should be used. You can also use the full suite of core modules in the tests. (As noted in L<"Patching a core module"> above, changes to F<.t> files found under F<cpan/> should be submitted to the upstream maintainers of those modules.) =back When you say "make test", Perl uses the F<t/TEST> program to run the test suite (except under Win32 where it uses F<t/harness> instead). All tests are run from the F<t/> directory, B<not> the directory which contains the test. This causes some problems with the tests in F<lib/>, so here's some opportunity for some patching. You must be triply conscious of cross-platform concerns. This usually boils down to using L<File::Spec>, avoiding things like C<fork()> and C<system()> unless absolutely necessary, and not assuming that a given character has a particular ordinal value (code point) or that its UTF-8 representation is composed of particular bytes. There are several functions available to specify characters and code points portably in tests. The always-preloaded functions C<utf8::unicode_to_native()> and its inverse C<utf8::native_to_unicode()> take code points and translate appropriately. The file F<t/charset_tools.pl> has several functions that can be useful. It has versions of the previous two functions that take strings as inputs -- not single numeric code points: C<uni_to_native()> and C<native_to_uni()>. If you must look at the individual bytes comprising a UTF-8 encoded string, C<byte_utf8a_to_utf8n()> takes as input a string of those bytes encoded for an ASCII platform, and returns the equivalent string in the native platform. For example, C<byte_utf8a_to_utf8n("\xC2\xA0")> returns the byte sequence on the current platform that form the UTF-8 for C<U+00A0>, since C<"\xC2\xA0"> are the UTF-8 bytes on an ASCII platform for that code point. This function returns C<"\xC2\xA0"> on an ASCII platform, and C<"\x80\x41"> on an EBCDIC 1047 one. But easiest is, if the character is specifiable as a literal, like C<"A"> or C<"%">, to use that; if not so specificable, you can use C<\N{}> , if the side effects aren't troublesome. Simply specify all your characters in hex, using C<\N{U+ZZ}> instead of C<\xZZ>. C<\N{}> is the Unicode name, and so it always gives you the Unicode character. C<\N{U+41}> is the character whose Unicode code point is C<0x41>, hence is C<'A'> on all platforms. The side effects are: =over 4 =item * These select Unicode rules. That means that in double-quotish strings, the string is always converted to UTF-8 to force a Unicode interpretation (you can C<utf8::downgrade()> afterwards to convert back to non-UTF8, if possible). In regular expression patterns, the conversion isn't done, but if the character set modifier would otherwise be C</d>, it is changed to C</u>. =item * If you use the form C<\N{I<character name>}>, the L<charnames> module gets automatically loaded. This may not be suitable for the test level you are doing. =back If you are testing locales (see L<perllocale>), there are helper functions in F<t/loc_tools.pl> to enable you to see what locales there are on the current platform. =head2 Special C<make test> targets There are various special make targets that can be used to test Perl slightly differently than the standard "test" target. Not all them are expected to give a 100% success rate. Many of them have several aliases, and many of them are not available on certain operating systems. =over 4 =item * test_porting This runs some basic sanity tests on the source tree and helps catch basic errors before you submit a patch. =item * minitest Run F<miniperl> on F<t/base>, F<t/comp>, F<t/cmd>, F<t/run>, F<t/io>, F<t/op>, F<t/uni> and F<t/mro> tests. F<miniperl> is a minimalistic perl built to bootstrap building extensions, utilties, documentation etc. It doesn't support dynamic loading and depending on the point in the build process will only have access to a limited set of core modules. F<miniperl> is not intended for day to day use. =item * test.valgrind check.valgrind (Only in Linux) Run all the tests using the memory leak + naughty memory access tool "valgrind". The log files will be named F<testname.valgrind>. =item * test_harness Run the test suite with the F<t/harness> controlling program, instead of F<t/TEST>. F<t/harness> is more sophisticated, and uses the L<Test::Harness> module, thus using this test target supposes that perl mostly works. The main advantage for our purposes is that it prints a detailed summary of failed tests at the end. Also, unlike F<t/TEST>, it doesn't redirect stderr to stdout. Note that under Win32 F<t/harness> is always used instead of F<t/TEST>, so there is no special "test_harness" target. Under Win32's "test" target you may use the TEST_SWITCHES and TEST_FILES environment variables to control the behaviour of F<t/harness>. This means you can say nmake test TEST_FILES="op/*.t" nmake test TEST_SWITCHES="-torture" TEST_FILES="op/*.t" =item * test-notty test_notty Sets PERL_SKIP_TTY_TEST to true before running normal test. =back =head2 Parallel tests The core distribution can now run its regression tests in parallel on Unix-like platforms. Instead of running C<make test>, set C<TEST_JOBS> in your environment to the number of tests to run in parallel, and run C<make test_harness>. On a Bourne-like shell, this can be done as TEST_JOBS=3 make test_harness # Run 3 tests in parallel An environment variable is used, rather than parallel make itself, because L<TAP::Harness> needs to be able to schedule individual non-conflicting test scripts itself, and there is no standard interface to C<make> utilities to interact with their job schedulers. Note that currently some test scripts may fail when run in parallel (most notably F<dist/IO/t/io_dir.t>). If necessary, run just the failing scripts again sequentially and see if the failures go away. =head2 Running tests by hand You can run part of the test suite by hand by using one of the following commands from the F<t/> directory: ./perl -I../lib TEST list-of-.t-files or ./perl -I../lib harness list-of-.t-files (If you don't specify test scripts, the whole test suite will be run.) =head2 Using F<t/harness> for testing If you use C<harness> for testing, you have several command line options available to you. The arguments are as follows, and are in the order that they must appear if used together. harness -v -torture -re=pattern LIST OF FILES TO TEST harness -v -torture -re LIST OF PATTERNS TO MATCH If C<LIST OF FILES TO TEST> is omitted, the file list is obtained from the manifest. The file list may include shell wildcards which will be expanded out. =over 4 =item * -v Run the tests under verbose mode so you can see what tests were run, and debug output. =item * -torture Run the torture tests as well as the normal set. =item * -re=PATTERN Filter the file list so that all the test files run match PATTERN. Note that this form is distinct from the B<-re LIST OF PATTERNS> form below in that it allows the file list to be provided as well. =item * -re LIST OF PATTERNS Filter the file list so that all the test files run match /(LIST|OF|PATTERNS)/. Note that with this form the patterns are joined by '|' and you cannot supply a list of files, instead the test files are obtained from the MANIFEST. =back You can run an individual test by a command similar to ./perl -I../lib path/to/foo.t except that the harnesses set up some environment variables that may affect the execution of the test: =over 4 =item * PERL_CORE=1 indicates that we're running this test as part of the perl core test suite. This is useful for modules that have a dual life on CPAN. =item * PERL_DESTRUCT_LEVEL=2 is set to 2 if it isn't set already (see L<perlhacktips/PERL_DESTRUCT_LEVEL>). =item * PERL (used only by F<t/TEST>) if set, overrides the path to the perl executable that should be used to run the tests (the default being F<./perl>). =item * PERL_SKIP_TTY_TEST if set, tells to skip the tests that need a terminal. It's actually set automatically by the Makefile, but can also be forced artificially by running 'make test_notty'. =back =head3 Other environment variables that may influence tests =over 4 =item * PERL_TEST_Net_Ping Setting this variable runs all the Net::Ping modules tests, otherwise some tests that interact with the outside world are skipped. See L<perl58delta>. =item * PERL_TEST_NOVREXX Setting this variable skips the vrexx.t tests for OS2::REXX. =item * PERL_TEST_NUMCONVERTS This sets a variable in op/numconvert.t. =item * PERL_TEST_MEMORY Setting this variable includes the tests in F<t/bigmem/>. This should be set to the number of gigabytes of memory available for testing, eg. C<PERL_TEST_MEMORY=4> indicates that tests that require 4GiB of available memory can be run safely. =back See also the documentation for the Test and Test::Harness modules, for more environment variables that affect testing. =head2 Performance testing The file F<t/perf/benchmarks> contains snippets of perl code which are intended to be benchmarked across a range of perls by the F<Porting/bench.pl> tool. If you fix or enhance a performance issue, you may want to add a representative code sample to the file, then run F<bench.pl> against the previous and current perls to see what difference it has made, and whether anything else has slowed down as a consequence. The file F<t/perf/opcount.t> is designed to test whether a particular code snippet has been compiled into an optree containing specified numbers of particular op types. This is good for testing whether optimisations which alter ops, such as converting an C<aelem> op into an C<aelemfast> op, are really doing that. The files F<t/perf/speed.t> and F<t/re/speed.t> are designed to test things that run thousands of times slower if a particular optimisation is broken (for example, the utf8 length cache on long utf8 strings). Add a test that will take a fraction of a second normally, and minutes otherwise, causing the test file to time out on failure. =head2 Building perl at older commits In the course of hacking on the Perl core distribution, you may have occasion to configure, build and test perl at an old commit. Sometimes C<make> will fail during this process. If that happens, you may be able to salvage the situation by using the Devel::PatchPerl library from CPAN (not included in the core) to bring the source code at that commit to a buildable state. Here's a real world example, taken from work done to resolve L<perl #10118|https://github.com/Perl/perl5/issues/10118>. Use of F<Porting/bisect.pl> had identified commit C<ba77e4cc9d1ceebf472c9c5c18b2377ee47062e6> as the commit in which a bug was corrected. To confirm, a P5P developer wanted to configure and build perl at commit C<ba77e4c^> (presumably "bad") and then at C<ba77e4c> (presumably "good"). Normal configuration and build was attempted: $ sh ./Configure -des -Dusedevel $ make test_prep C<make>, however, failed with output (excerpted) like this: cc -fstack-protector -L/usr/local/lib -o miniperl \ gv.o toke.o perly.o pad.o regcomp.o dump.o util.o \ mg.o reentr.o mro.o hv.o av.o run.o pp_hot.o sv.o \ pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o \ utf8.o taint.o deb.o universal.o globals.o perlio.o \ perlapi.o numeric.o mathoms.o locale.o pp_pack.o pp_sort.o \ miniperlmain.o opmini.o perlmini.o pp.o: In function `Perl_pp_pow': pp.c:(.text+0x2db9): undefined reference to `pow' ... collect2: error: ld returned 1 exit status makefile:348: recipe for target 'miniperl' failed make: *** [miniperl] Error 1 Another P5P contributor recommended installation and use of Devel::PatchPerl for this situation, first to determine the version of perl at the commit in question, then to patch the source code at that point to facilitate a build. $ perl -MDevel::PatchPerl -e \ 'print Devel::PatchPerl->determine_version("/path/to/sourcecode"), "\n";' 5.11.1 $ perl -MDevel::PatchPerl -e \ 'Devel::PatchPerl->patch_source("5.11.1", "/path/to/sourcecode");' Once the source was patched, C<./Configure> and C<make test_prep> were called and completed successfully, enabling confirmation of the findings in RT #72414. =head1 MORE READING FOR GUTS HACKERS To hack on the Perl guts, you'll need to read the following things: =over 4 =item * L<perlsource> An overview of the Perl source tree. This will help you find the files you're looking for. =item * L<perlinterp> An overview of the Perl interpreter source code and some details on how Perl does what it does. =item * L<perlhacktut> This document walks through the creation of a small patch to Perl's C code. If you're just getting started with Perl core hacking, this will help you understand how it works. =item * L<perlhacktips> More details on hacking the Perl core. This document focuses on lower level details such as how to write tests, compilation issues, portability, debugging, etc. If you plan on doing serious C hacking, make sure to read this. =item * L<perlguts> This is of paramount importance, since it's the documentation of what goes where in the Perl source. Read it over a couple of times and it might start to make sense - don't worry if it doesn't yet, because the best way to study it is to read it in conjunction with poking at Perl source, and we'll do that later on. Gisle Aas's "illustrated perlguts", also known as I<illguts>, has very helpful pictures: L<https://search.cpan.org/dist/illguts/> =item * L<perlxstut> and L<perlxs> A working knowledge of XSUB programming is incredibly useful for core hacking; XSUBs use techniques drawn from the PP code, the portion of the guts that actually executes a Perl program. It's a lot gentler to learn those techniques from simple examples and explanation than from the core itself. =item * L<perlapi> The documentation for the Perl API explains what some of the internal functions do, as well as the many macros used in the source. =item * F<Porting/pumpkin.pod> This is a collection of words of wisdom for a Perl porter; some of it is only useful to the pumpkin holders, but most of it applies to anyone wanting to go about Perl development. =back =head1 CPAN TESTERS AND PERL SMOKERS The CPAN testers ( L<http://cpantesters.org/> ) are a group of volunteers who test CPAN modules on a variety of platforms. Perl Smokers ( L<https://www.nntp.perl.org/group/perl.daily-build/> and L<https://www.nntp.perl.org/group/perl.daily-build.reports/> ) automatically test Perl source releases on platforms with various configurations. Both efforts welcome volunteers. In order to get involved in smoke testing of the perl itself visit L<https://metacpan.org/release/Test-Smoke>. In order to start smoke testing CPAN modules visit L<https://metacpan.org/release/CPANPLUS-YACSmoke> or L<https://metacpan.org/release/minismokebox> or L<https://metacpan.org/release/CPAN-Reporter>. =head1 WHAT NEXT? If you've read all the documentation in the document and the ones listed above, you're more than ready to hack on Perl. Here's some more recommendations =over 4 =item * Subscribe to perl5-porters, follow the patches and try and understand them; don't be afraid to ask if there's a portion you're not clear on - who knows, you may unearth a bug in the patch... =item * Do read the README associated with your operating system, e.g. README.aix on the IBM AIX OS. Don't hesitate to supply patches to that README if you find anything missing or changed over a new OS release. =item * Find an area of Perl that seems interesting to you, and see if you can work out how it works. Scan through the source, and step over it in the debugger. Play, poke, investigate, fiddle! You'll probably get to understand not just your chosen area but a much wider range of F<perl>'s activity as well, and probably sooner than you'd think. =back =head2 "The Road goes ever on and on, down from the door where it began." If you can do these things, you've started on the long road to Perl porting. Thanks for wanting to help make Perl better - and happy hacking! =head2 Metaphoric Quotations If you recognized the quote about the Road above, you're in luck. Most software projects begin each file with a literal description of each file's purpose. Perl instead begins each with a literary allusion to that file's purpose. Like chapters in many books, all top-level Perl source files (along with a few others here and there) begin with an epigrammatic inscription that alludes, indirectly and metaphorically, to the material you're about to read. Quotations are taken from writings of J.R.R. Tolkien pertaining to his Legendarium, almost always from I<The Lord of the Rings>. Chapters and page numbers are given using the following editions: =over 4 =item * I<The Hobbit>, by J.R.R. Tolkien. The hardcover, 70th-anniversary edition of 2007 was used, published in the UK by Harper Collins Publishers and in the US by the Houghton Mifflin Company. =item * I<The Lord of the Rings>, by J.R.R. Tolkien. The hardcover, 50th-anniversary edition of 2004 was used, published in the UK by Harper Collins Publishers and in the US by the Houghton Mifflin Company. =item * I<The Lays of Beleriand>, by J.R.R. Tolkien and published posthumously by his son and literary executor, C.J.R. Tolkien, being the 3rd of the 12 volumes in Christopher's mammoth I<History of Middle Earth>. Page numbers derive from the hardcover edition, first published in 1983 by George Allen & Unwin; no page numbers changed for the special 3-volume omnibus edition of 2002 or the various trade-paper editions, all again now by Harper Collins or Houghton Mifflin. =back Other JRRT books fair game for quotes would thus include I<The Adventures of Tom Bombadil>, I<The Silmarillion>, I<Unfinished Tales>, and I<The Tale of the Children of Hurin>, all but the first posthumously assembled by CJRT. But I<The Lord of the Rings> itself is perfectly fine and probably best to quote from, provided you can find a suitable quote there. So if you were to supply a new, complete, top-level source file to add to Perl, you should conform to this peculiar practice by yourself selecting an appropriate quotation from Tolkien, retaining the original spelling and punctuation and using the same format the rest of the quotes are in. Indirect and oblique is just fine; remember, it's a metaphor, so being meta is, after all, what it's for. =head1 AUTHOR This document was originally written by Nathan Torkington, and is maintained by the perl5-porters mailing list. perlfunc.pod 0000644 00001424501 15125556335 0007107 0 ustar 00 =head1 NAME X<function> perlfunc - Perl builtin functions =head1 DESCRIPTION The functions in this section can serve as terms in an expression. They fall into two major categories: list operators and named unary operators. These differ in their precedence relationship with a following comma. (See the precedence table in L<perlop>.) List operators take more than one argument, while unary operators can never take more than one argument. Thus, a comma terminates the argument of a unary operator, but merely separates the arguments of a list operator. A unary operator generally provides scalar context to its argument, while a list operator may provide either scalar or list contexts for its arguments. If it does both, scalar arguments come first and list argument follow, and there can only ever be one such list argument. For instance, L<C<splice>|/splice ARRAY,OFFSET,LENGTH,LIST> has three scalar arguments followed by a list, whereas L<C<gethostbyname>|/gethostbyname NAME> has four scalar arguments. In the syntax descriptions that follow, list operators that expect a list (and provide list context for elements of the list) are shown with LIST as an argument. Such a list may consist of any combination of scalar arguments or list values; the list values will be included in the list as if each individual element were interpolated at that point in the list, forming a longer single-dimensional list value. Commas should separate literal elements of the LIST. Any function in the list below may be used either with or without parentheses around its arguments. (The syntax descriptions omit the parentheses.) If you use parentheses, the simple but occasionally surprising rule is this: It I<looks> like a function, therefore it I<is> a function, and precedence doesn't matter. Otherwise it's a list operator or unary operator, and precedence does matter. Whitespace between the function and left parenthesis doesn't count, so sometimes you need to be careful: print 1+2+4; # Prints 7. print(1+2) + 4; # Prints 3. print (1+2)+4; # Also prints 3! print +(1+2)+4; # Prints 7. print ((1+2)+4); # Prints 7. If you run Perl with the L<C<use warnings>|warnings> pragma, it can warn you about this. For example, the third line above produces: print (...) interpreted as function at - line 1. Useless use of integer addition in void context at - line 1. A few functions take no arguments at all, and therefore work as neither unary nor list operators. These include such functions as L<C<time>|/time> and L<C<endpwent>|/endpwent>. For example, C<time+86_400> always means C<time() + 86_400>. For functions that can be used in either a scalar or list context, nonabortive failure is generally indicated in scalar context by returning the undefined value, and in list context by returning the empty list. Remember the following important rule: There is B<no rule> that relates the behavior of an expression in list context to its behavior in scalar context, or vice versa. It might do two totally different things. Each operator and function decides which sort of value would be most appropriate to return in scalar context. Some operators return the length of the list that would have been returned in list context. Some operators return the first value in the list. Some operators return the last value in the list. Some operators return a count of successful operations. In general, they do what you want, unless you want consistency. X<context> A named array in scalar context is quite different from what would at first glance appear to be a list in scalar context. You can't get a list like C<(1,2,3)> into being in scalar context, because the compiler knows the context at compile time. It would generate the scalar comma operator there, not the list concatenation version of the comma. That means it was never a list to start with. In general, functions in Perl that serve as wrappers for system calls ("syscalls") of the same name (like L<chown(2)>, L<fork(2)>, L<closedir(2)>, etc.) return true when they succeed and L<C<undef>|/undef EXPR> otherwise, as is usually mentioned in the descriptions below. This is different from the C interfaces, which return C<-1> on failure. Exceptions to this rule include L<C<wait>|/wait>, L<C<waitpid>|/waitpid PID,FLAGS>, and L<C<syscall>|/syscall NUMBER, LIST>. System calls also set the special L<C<$!>|perlvar/$!> variable on failure. Other functions do not, except accidentally. Extension modules can also hook into the Perl parser to define new kinds of keyword-headed expression. These may look like functions, but may also look completely different. The syntax following the keyword is defined entirely by the extension. If you are an implementor, see L<perlapi/PL_keyword_plugin> for the mechanism. If you are using such a module, see the module's documentation for details of the syntax that it defines. =head2 Perl Functions by Category X<function> Here are Perl's functions (including things that look like functions, like some keywords and named operators) arranged by category. Some functions appear in more than one place. Any warnings, including those produced by keywords, are described in L<perldiag> and L<warnings>. =over 4 =item Functions for SCALARs or strings X<scalar> X<string> X<character> =for Pod::Functions =String L<C<chomp>|/chomp VARIABLE>, L<C<chop>|/chop VARIABLE>, L<C<chr>|/chr NUMBER>, L<C<crypt>|/crypt PLAINTEXT,SALT>, L<C<fc>|/fc EXPR>, L<C<hex>|/hex EXPR>, L<C<index>|/index STR,SUBSTR,POSITION>, L<C<lc>|/lc EXPR>, L<C<lcfirst>|/lcfirst EXPR>, L<C<length>|/length EXPR>, L<C<oct>|/oct EXPR>, L<C<ord>|/ord EXPR>, L<C<pack>|/pack TEMPLATE,LIST>, L<C<qE<sol>E<sol>>|/qE<sol>STRINGE<sol>>, L<C<qqE<sol>E<sol>>|/qqE<sol>STRINGE<sol>>, L<C<reverse>|/reverse LIST>, L<C<rindex>|/rindex STR,SUBSTR,POSITION>, L<C<sprintf>|/sprintf FORMAT, LIST>, L<C<substr>|/substr EXPR,OFFSET,LENGTH,REPLACEMENT>, L<C<trE<sol>E<sol>E<sol>>|/trE<sol>E<sol>E<sol>>, L<C<uc>|/uc EXPR>, L<C<ucfirst>|/ucfirst EXPR>, L<C<yE<sol>E<sol>E<sol>>|/yE<sol>E<sol>E<sol>> L<C<fc>|/fc EXPR> is available only if the L<C<"fc"> feature|feature/The 'fc' feature> is enabled or if it is prefixed with C<CORE::>. The L<C<"fc"> feature|feature/The 'fc' feature> is enabled automatically with a C<use v5.16> (or higher) declaration in the current scope. =item Regular expressions and pattern matching X<regular expression> X<regex> X<regexp> =for Pod::Functions =Regexp L<C<mE<sol>E<sol>>|/mE<sol>E<sol>>, L<C<pos>|/pos SCALAR>, L<C<qrE<sol>E<sol>>|/qrE<sol>STRINGE<sol>>, L<C<quotemeta>|/quotemeta EXPR>, L<C<sE<sol>E<sol>E<sol>>|/sE<sol>E<sol>E<sol>>, L<C<split>|/split E<sol>PATTERNE<sol>,EXPR,LIMIT>, L<C<study>|/study SCALAR> =item Numeric functions X<numeric> X<number> X<trigonometric> X<trigonometry> =for Pod::Functions =Math L<C<abs>|/abs VALUE>, L<C<atan2>|/atan2 Y,X>, L<C<cos>|/cos EXPR>, L<C<exp>|/exp EXPR>, L<C<hex>|/hex EXPR>, L<C<int>|/int EXPR>, L<C<log>|/log EXPR>, L<C<oct>|/oct EXPR>, L<C<rand>|/rand EXPR>, L<C<sin>|/sin EXPR>, L<C<sqrt>|/sqrt EXPR>, L<C<srand>|/srand EXPR> =item Functions for real @ARRAYs X<array> =for Pod::Functions =ARRAY L<C<each>|/each HASH>, L<C<keys>|/keys HASH>, L<C<pop>|/pop ARRAY>, L<C<push>|/push ARRAY,LIST>, L<C<shift>|/shift ARRAY>, L<C<splice>|/splice ARRAY,OFFSET,LENGTH,LIST>, L<C<unshift>|/unshift ARRAY,LIST>, L<C<values>|/values HASH> =item Functions for list data X<list> =for Pod::Functions =LIST L<C<grep>|/grep BLOCK LIST>, L<C<join>|/join EXPR,LIST>, L<C<map>|/map BLOCK LIST>, L<C<qwE<sol>E<sol>>|/qwE<sol>STRINGE<sol>>, L<C<reverse>|/reverse LIST>, L<C<sort>|/sort SUBNAME LIST>, L<C<unpack>|/unpack TEMPLATE,EXPR> =item Functions for real %HASHes X<hash> =for Pod::Functions =HASH L<C<delete>|/delete EXPR>, L<C<each>|/each HASH>, L<C<exists>|/exists EXPR>, L<C<keys>|/keys HASH>, L<C<values>|/values HASH> =item Input and output functions X<I/O> X<input> X<output> X<dbm> =for Pod::Functions =I/O L<C<binmode>|/binmode FILEHANDLE, LAYER>, L<C<close>|/close FILEHANDLE>, L<C<closedir>|/closedir DIRHANDLE>, L<C<dbmclose>|/dbmclose HASH>, L<C<dbmopen>|/dbmopen HASH,DBNAME,MASK>, L<C<die>|/die LIST>, L<C<eof>|/eof FILEHANDLE>, L<C<fileno>|/fileno FILEHANDLE>, L<C<flock>|/flock FILEHANDLE,OPERATION>, L<C<format>|/format>, L<C<getc>|/getc FILEHANDLE>, L<C<print>|/print FILEHANDLE LIST>, L<C<printf>|/printf FILEHANDLE FORMAT, LIST>, L<C<read>|/read FILEHANDLE,SCALAR,LENGTH,OFFSET>, L<C<readdir>|/readdir DIRHANDLE>, L<C<readline>|/readline EXPR>, L<C<rewinddir>|/rewinddir DIRHANDLE>, L<C<say>|/say FILEHANDLE LIST>, L<C<seek>|/seek FILEHANDLE,POSITION,WHENCE>, L<C<seekdir>|/seekdir DIRHANDLE,POS>, L<C<select>|/select RBITS,WBITS,EBITS,TIMEOUT>, L<C<syscall>|/syscall NUMBER, LIST>, L<C<sysread>|/sysread FILEHANDLE,SCALAR,LENGTH,OFFSET>, L<C<sysseek>|/sysseek FILEHANDLE,POSITION,WHENCE>, L<C<syswrite>|/syswrite FILEHANDLE,SCALAR,LENGTH,OFFSET>, L<C<tell>|/tell FILEHANDLE>, L<C<telldir>|/telldir DIRHANDLE>, L<C<truncate>|/truncate FILEHANDLE,LENGTH>, L<C<warn>|/warn LIST>, L<C<write>|/write FILEHANDLE> L<C<say>|/say FILEHANDLE LIST> is available only if the L<C<"say"> feature|feature/The 'say' feature> is enabled or if it is prefixed with C<CORE::>. The L<C<"say"> feature|feature/The 'say' feature> is enabled automatically with a C<use v5.10> (or higher) declaration in the current scope. =item Functions for fixed-length data or records =for Pod::Functions =Binary L<C<pack>|/pack TEMPLATE,LIST>, L<C<read>|/read FILEHANDLE,SCALAR,LENGTH,OFFSET>, L<C<syscall>|/syscall NUMBER, LIST>, L<C<sysread>|/sysread FILEHANDLE,SCALAR,LENGTH,OFFSET>, L<C<sysseek>|/sysseek FILEHANDLE,POSITION,WHENCE>, L<C<syswrite>|/syswrite FILEHANDLE,SCALAR,LENGTH,OFFSET>, L<C<unpack>|/unpack TEMPLATE,EXPR>, L<C<vec>|/vec EXPR,OFFSET,BITS> =item Functions for filehandles, files, or directories X<file> X<filehandle> X<directory> X<pipe> X<link> X<symlink> =for Pod::Functions =File L<C<-I<X>>|/-X FILEHANDLE>, L<C<chdir>|/chdir EXPR>, L<C<chmod>|/chmod LIST>, L<C<chown>|/chown LIST>, L<C<chroot>|/chroot FILENAME>, L<C<fcntl>|/fcntl FILEHANDLE,FUNCTION,SCALAR>, L<C<glob>|/glob EXPR>, L<C<ioctl>|/ioctl FILEHANDLE,FUNCTION,SCALAR>, L<C<link>|/link OLDFILE,NEWFILE>, L<C<lstat>|/lstat FILEHANDLE>, L<C<mkdir>|/mkdir FILENAME,MODE>, L<C<open>|/open FILEHANDLE,MODE,EXPR>, L<C<opendir>|/opendir DIRHANDLE,EXPR>, L<C<readlink>|/readlink EXPR>, L<C<rename>|/rename OLDNAME,NEWNAME>, L<C<rmdir>|/rmdir FILENAME>, L<C<select>|/select FILEHANDLE>, L<C<stat>|/stat FILEHANDLE>, L<C<symlink>|/symlink OLDFILE,NEWFILE>, L<C<sysopen>|/sysopen FILEHANDLE,FILENAME,MODE>, L<C<umask>|/umask EXPR>, L<C<unlink>|/unlink LIST>, L<C<utime>|/utime LIST> =item Keywords related to the control flow of your Perl program X<control flow> =for Pod::Functions =Flow L<C<break>|/break>, L<C<caller>|/caller EXPR>, L<C<continue>|/continue BLOCK>, L<C<die>|/die LIST>, L<C<do>|/do BLOCK>, L<C<dump>|/dump LABEL>, L<C<eval>|/eval EXPR>, L<C<evalbytes>|/evalbytes EXPR>, L<C<exit>|/exit EXPR>, L<C<__FILE__>|/__FILE__>, L<C<goto>|/goto LABEL>, L<C<last>|/last LABEL>, L<C<__LINE__>|/__LINE__>, L<C<next>|/next LABEL>, L<C<__PACKAGE__>|/__PACKAGE__>, L<C<redo>|/redo LABEL>, L<C<return>|/return EXPR>, L<C<sub>|/sub NAME BLOCK>, L<C<__SUB__>|/__SUB__>, L<C<wantarray>|/wantarray> L<C<break>|/break> is available only if you enable the experimental L<C<"switch"> feature|feature/The 'switch' feature> or use the C<CORE::> prefix. The L<C<"switch"> feature|feature/The 'switch' feature> also enables the C<default>, C<given> and C<when> statements, which are documented in L<perlsyn/"Switch Statements">. The L<C<"switch"> feature|feature/The 'switch' feature> is enabled automatically with a C<use v5.10> (or higher) declaration in the current scope. In Perl v5.14 and earlier, L<C<continue>|/continue BLOCK> required the L<C<"switch"> feature|feature/The 'switch' feature>, like the other keywords. L<C<evalbytes>|/evalbytes EXPR> is only available with the L<C<"evalbytes"> feature|feature/The 'unicode_eval' and 'evalbytes' features> (see L<feature>) or if prefixed with C<CORE::>. L<C<__SUB__>|/__SUB__> is only available with the L<C<"current_sub"> feature|feature/The 'current_sub' feature> or if prefixed with C<CORE::>. Both the L<C<"evalbytes">|feature/The 'unicode_eval' and 'evalbytes' features> and L<C<"current_sub">|feature/The 'current_sub' feature> features are enabled automatically with a C<use v5.16> (or higher) declaration in the current scope. =item Keywords related to scoping =for Pod::Functions =Namespace L<C<caller>|/caller EXPR>, L<C<import>|/import LIST>, L<C<local>|/local EXPR>, L<C<my>|/my VARLIST>, L<C<our>|/our VARLIST>, L<C<package>|/package NAMESPACE>, L<C<state>|/state VARLIST>, L<C<use>|/use Module VERSION LIST> L<C<state>|/state VARLIST> is available only if the L<C<"state"> feature|feature/The 'state' feature> is enabled or if it is prefixed with C<CORE::>. The L<C<"state"> feature|feature/The 'state' feature> is enabled automatically with a C<use v5.10> (or higher) declaration in the current scope. =item Miscellaneous functions =for Pod::Functions =Misc L<C<defined>|/defined EXPR>, L<C<formline>|/formline PICTURE,LIST>, L<C<lock>|/lock THING>, L<C<prototype>|/prototype FUNCTION>, L<C<reset>|/reset EXPR>, L<C<scalar>|/scalar EXPR>, L<C<undef>|/undef EXPR> =item Functions for processes and process groups X<process> X<pid> X<process id> =for Pod::Functions =Process L<C<alarm>|/alarm SECONDS>, L<C<exec>|/exec LIST>, L<C<fork>|/fork>, L<C<getpgrp>|/getpgrp PID>, L<C<getppid>|/getppid>, L<C<getpriority>|/getpriority WHICH,WHO>, L<C<kill>|/kill SIGNAL, LIST>, L<C<pipe>|/pipe READHANDLE,WRITEHANDLE>, L<C<qxE<sol>E<sol>>|/qxE<sol>STRINGE<sol>>, L<C<readpipe>|/readpipe EXPR>, L<C<setpgrp>|/setpgrp PID,PGRP>, L<C<setpriority>|/setpriority WHICH,WHO,PRIORITY>, L<C<sleep>|/sleep EXPR>, L<C<system>|/system LIST>, L<C<times>|/times>, L<C<wait>|/wait>, L<C<waitpid>|/waitpid PID,FLAGS> =item Keywords related to Perl modules X<module> =for Pod::Functions =Modules L<C<do>|/do EXPR>, L<C<import>|/import LIST>, L<C<no>|/no MODULE VERSION LIST>, L<C<package>|/package NAMESPACE>, L<C<require>|/require VERSION>, L<C<use>|/use Module VERSION LIST> =item Keywords related to classes and object-orientation X<object> X<class> X<package> =for Pod::Functions =Objects L<C<bless>|/bless REF,CLASSNAME>, L<C<dbmclose>|/dbmclose HASH>, L<C<dbmopen>|/dbmopen HASH,DBNAME,MASK>, L<C<package>|/package NAMESPACE>, L<C<ref>|/ref EXPR>, L<C<tie>|/tie VARIABLE,CLASSNAME,LIST>, L<C<tied>|/tied VARIABLE>, L<C<untie>|/untie VARIABLE>, L<C<use>|/use Module VERSION LIST> =item Low-level socket functions X<socket> X<sock> =for Pod::Functions =Socket L<C<accept>|/accept NEWSOCKET,GENERICSOCKET>, L<C<bind>|/bind SOCKET,NAME>, L<C<connect>|/connect SOCKET,NAME>, L<C<getpeername>|/getpeername SOCKET>, L<C<getsockname>|/getsockname SOCKET>, L<C<getsockopt>|/getsockopt SOCKET,LEVEL,OPTNAME>, L<C<listen>|/listen SOCKET,QUEUESIZE>, L<C<recv>|/recv SOCKET,SCALAR,LENGTH,FLAGS>, L<C<send>|/send SOCKET,MSG,FLAGS,TO>, L<C<setsockopt>|/setsockopt SOCKET,LEVEL,OPTNAME,OPTVAL>, L<C<shutdown>|/shutdown SOCKET,HOW>, L<C<socket>|/socket SOCKET,DOMAIN,TYPE,PROTOCOL>, L<C<socketpair>|/socketpair SOCKET1,SOCKET2,DOMAIN,TYPE,PROTOCOL> =item System V interprocess communication functions X<IPC> X<System V> X<semaphore> X<shared memory> X<memory> X<message> =for Pod::Functions =SysV L<C<msgctl>|/msgctl ID,CMD,ARG>, L<C<msgget>|/msgget KEY,FLAGS>, L<C<msgrcv>|/msgrcv ID,VAR,SIZE,TYPE,FLAGS>, L<C<msgsnd>|/msgsnd ID,MSG,FLAGS>, L<C<semctl>|/semctl ID,SEMNUM,CMD,ARG>, L<C<semget>|/semget KEY,NSEMS,FLAGS>, L<C<semop>|/semop KEY,OPSTRING>, L<C<shmctl>|/shmctl ID,CMD,ARG>, L<C<shmget>|/shmget KEY,SIZE,FLAGS>, L<C<shmread>|/shmread ID,VAR,POS,SIZE>, L<C<shmwrite>|/shmwrite ID,STRING,POS,SIZE> =item Fetching user and group info X<user> X<group> X<password> X<uid> X<gid> X<passwd> X</etc/passwd> =for Pod::Functions =User L<C<endgrent>|/endgrent>, L<C<endhostent>|/endhostent>, L<C<endnetent>|/endnetent>, L<C<endpwent>|/endpwent>, L<C<getgrent>|/getgrent>, L<C<getgrgid>|/getgrgid GID>, L<C<getgrnam>|/getgrnam NAME>, L<C<getlogin>|/getlogin>, L<C<getpwent>|/getpwent>, L<C<getpwnam>|/getpwnam NAME>, L<C<getpwuid>|/getpwuid UID>, L<C<setgrent>|/setgrent>, L<C<setpwent>|/setpwent> =item Fetching network info X<network> X<protocol> X<host> X<hostname> X<IP> X<address> X<service> =for Pod::Functions =Network L<C<endprotoent>|/endprotoent>, L<C<endservent>|/endservent>, L<C<gethostbyaddr>|/gethostbyaddr ADDR,ADDRTYPE>, L<C<gethostbyname>|/gethostbyname NAME>, L<C<gethostent>|/gethostent>, L<C<getnetbyaddr>|/getnetbyaddr ADDR,ADDRTYPE>, L<C<getnetbyname>|/getnetbyname NAME>, L<C<getnetent>|/getnetent>, L<C<getprotobyname>|/getprotobyname NAME>, L<C<getprotobynumber>|/getprotobynumber NUMBER>, L<C<getprotoent>|/getprotoent>, L<C<getservbyname>|/getservbyname NAME,PROTO>, L<C<getservbyport>|/getservbyport PORT,PROTO>, L<C<getservent>|/getservent>, L<C<sethostent>|/sethostent STAYOPEN>, L<C<setnetent>|/setnetent STAYOPEN>, L<C<setprotoent>|/setprotoent STAYOPEN>, L<C<setservent>|/setservent STAYOPEN> =item Time-related functions X<time> X<date> =for Pod::Functions =Time L<C<gmtime>|/gmtime EXPR>, L<C<localtime>|/localtime EXPR>, L<C<time>|/time>, L<C<times>|/times> =item Non-function keywords =for Pod::Functions =!Non-functions C<and>, C<AUTOLOAD>, C<BEGIN>, C<CHECK>, C<cmp>, C<CORE>, C<__DATA__>, C<default>, C<DESTROY>, C<else>, C<elseif>, C<elsif>, C<END>, C<__END__>, C<eq>, C<for>, C<foreach>, C<ge>, C<given>, C<gt>, C<if>, C<INIT>, C<le>, C<lt>, C<ne>, C<not>, C<or>, C<UNITCHECK>, C<unless>, C<until>, C<when>, C<while>, C<x>, C<xor> =back =head2 Portability X<portability> X<Unix> X<portable> Perl was born in Unix and can therefore access all common Unix system calls. In non-Unix environments, the functionality of some Unix system calls may not be available or details of the available functionality may differ slightly. The Perl functions affected by this are: L<C<-I<X>>|/-X FILEHANDLE>, L<C<binmode>|/binmode FILEHANDLE, LAYER>, L<C<chmod>|/chmod LIST>, L<C<chown>|/chown LIST>, L<C<chroot>|/chroot FILENAME>, L<C<crypt>|/crypt PLAINTEXT,SALT>, L<C<dbmclose>|/dbmclose HASH>, L<C<dbmopen>|/dbmopen HASH,DBNAME,MASK>, L<C<dump>|/dump LABEL>, L<C<endgrent>|/endgrent>, L<C<endhostent>|/endhostent>, L<C<endnetent>|/endnetent>, L<C<endprotoent>|/endprotoent>, L<C<endpwent>|/endpwent>, L<C<endservent>|/endservent>, L<C<exec>|/exec LIST>, L<C<fcntl>|/fcntl FILEHANDLE,FUNCTION,SCALAR>, L<C<flock>|/flock FILEHANDLE,OPERATION>, L<C<fork>|/fork>, L<C<getgrent>|/getgrent>, L<C<getgrgid>|/getgrgid GID>, L<C<gethostbyname>|/gethostbyname NAME>, L<C<gethostent>|/gethostent>, L<C<getlogin>|/getlogin>, L<C<getnetbyaddr>|/getnetbyaddr ADDR,ADDRTYPE>, L<C<getnetbyname>|/getnetbyname NAME>, L<C<getnetent>|/getnetent>, L<C<getppid>|/getppid>, L<C<getpgrp>|/getpgrp PID>, L<C<getpriority>|/getpriority WHICH,WHO>, L<C<getprotobynumber>|/getprotobynumber NUMBER>, L<C<getprotoent>|/getprotoent>, L<C<getpwent>|/getpwent>, L<C<getpwnam>|/getpwnam NAME>, L<C<getpwuid>|/getpwuid UID>, L<C<getservbyport>|/getservbyport PORT,PROTO>, L<C<getservent>|/getservent>, L<C<getsockopt>|/getsockopt SOCKET,LEVEL,OPTNAME>, L<C<glob>|/glob EXPR>, L<C<ioctl>|/ioctl FILEHANDLE,FUNCTION,SCALAR>, L<C<kill>|/kill SIGNAL, LIST>, L<C<link>|/link OLDFILE,NEWFILE>, L<C<lstat>|/lstat FILEHANDLE>, L<C<msgctl>|/msgctl ID,CMD,ARG>, L<C<msgget>|/msgget KEY,FLAGS>, L<C<msgrcv>|/msgrcv ID,VAR,SIZE,TYPE,FLAGS>, L<C<msgsnd>|/msgsnd ID,MSG,FLAGS>, L<C<open>|/open FILEHANDLE,MODE,EXPR>, L<C<pipe>|/pipe READHANDLE,WRITEHANDLE>, L<C<readlink>|/readlink EXPR>, L<C<rename>|/rename OLDNAME,NEWNAME>, L<C<select>|/select RBITS,WBITS,EBITS,TIMEOUT>, L<C<semctl>|/semctl ID,SEMNUM,CMD,ARG>, L<C<semget>|/semget KEY,NSEMS,FLAGS>, L<C<semop>|/semop KEY,OPSTRING>, L<C<setgrent>|/setgrent>, L<C<sethostent>|/sethostent STAYOPEN>, L<C<setnetent>|/setnetent STAYOPEN>, L<C<setpgrp>|/setpgrp PID,PGRP>, L<C<setpriority>|/setpriority WHICH,WHO,PRIORITY>, L<C<setprotoent>|/setprotoent STAYOPEN>, L<C<setpwent>|/setpwent>, L<C<setservent>|/setservent STAYOPEN>, L<C<setsockopt>|/setsockopt SOCKET,LEVEL,OPTNAME,OPTVAL>, L<C<shmctl>|/shmctl ID,CMD,ARG>, L<C<shmget>|/shmget KEY,SIZE,FLAGS>, L<C<shmread>|/shmread ID,VAR,POS,SIZE>, L<C<shmwrite>|/shmwrite ID,STRING,POS,SIZE>, L<C<socket>|/socket SOCKET,DOMAIN,TYPE,PROTOCOL>, L<C<socketpair>|/socketpair SOCKET1,SOCKET2,DOMAIN,TYPE,PROTOCOL>, L<C<stat>|/stat FILEHANDLE>, L<C<symlink>|/symlink OLDFILE,NEWFILE>, L<C<syscall>|/syscall NUMBER, LIST>, L<C<sysopen>|/sysopen FILEHANDLE,FILENAME,MODE>, L<C<system>|/system LIST>, L<C<times>|/times>, L<C<truncate>|/truncate FILEHANDLE,LENGTH>, L<C<umask>|/umask EXPR>, L<C<unlink>|/unlink LIST>, L<C<utime>|/utime LIST>, L<C<wait>|/wait>, L<C<waitpid>|/waitpid PID,FLAGS> For more information about the portability of these functions, see L<perlport> and other available platform-specific documentation. =head2 Alphabetical Listing of Perl Functions =over =item -X FILEHANDLE X<-r>X<-w>X<-x>X<-o>X<-R>X<-W>X<-X>X<-O>X<-e>X<-z>X<-s>X<-f>X<-d>X<-l>X<-p> X<-S>X<-b>X<-c>X<-t>X<-u>X<-g>X<-k>X<-T>X<-B>X<-M>X<-A>X<-C> =item -X EXPR =item -X DIRHANDLE =item -X =for Pod::Functions a file test (-r, -x, etc) A file test, where X is one of the letters listed below. This unary operator takes one argument, either a filename, a filehandle, or a dirhandle, and tests the associated file to see if something is true about it. If the argument is omitted, tests L<C<$_>|perlvar/$_>, except for C<-t>, which tests STDIN. Unless otherwise documented, it returns C<1> for true and C<''> for false. If the file doesn't exist or can't be examined, it returns L<C<undef>|/undef EXPR> and sets L<C<$!>|perlvar/$!> (errno). With the exception of the C<-l> test they all follow symbolic links because they use C<stat()> and not C<lstat()> (so dangling symlinks can't be examined and will therefore report failure). Despite the funny names, precedence is the same as any other named unary operator. The operator may be any of: -r File is readable by effective uid/gid. -w File is writable by effective uid/gid. -x File is executable by effective uid/gid. -o File is owned by effective uid. -R File is readable by real uid/gid. -W File is writable by real uid/gid. -X File is executable by real uid/gid. -O File is owned by real uid. -e File exists. -z File has zero size (is empty). -s File has nonzero size (returns size in bytes). -f File is a plain file. -d File is a directory. -l File is a symbolic link (false if symlinks aren't supported by the file system). -p File is a named pipe (FIFO), or Filehandle is a pipe. -S File is a socket. -b File is a block special file. -c File is a character special file. -t Filehandle is opened to a tty. -u File has setuid bit set. -g File has setgid bit set. -k File has sticky bit set. -T File is an ASCII or UTF-8 text file (heuristic guess). -B File is a "binary" file (opposite of -T). -M Script start time minus file modification time, in days. -A Same for access time. -C Same for inode change time (Unix, may differ for other platforms) Example: while (<>) { chomp; next unless -f $_; # ignore specials #... } Note that C<-s/a/b/> does not do a negated substitution. Saying C<-exp($foo)> still works as expected, however: only single letters following a minus are interpreted as file tests. These operators are exempt from the "looks like a function rule" described above. That is, an opening parenthesis after the operator does not affect how much of the following code constitutes the argument. Put the opening parentheses before the operator to separate it from code that follows (this applies only to operators with higher precedence than unary operators, of course): -s($file) + 1024 # probably wrong; same as -s($file + 1024) (-s $file) + 1024 # correct The interpretation of the file permission operators C<-r>, C<-R>, C<-w>, C<-W>, C<-x>, and C<-X> is by default based solely on the mode of the file and the uids and gids of the user. There may be other reasons you can't actually read, write, or execute the file: for example network filesystem access controls, ACLs (access control lists), read-only filesystems, and unrecognized executable formats. Note that the use of these six specific operators to verify if some operation is possible is usually a mistake, because it may be open to race conditions. Also note that, for the superuser on the local filesystems, the C<-r>, C<-R>, C<-w>, and C<-W> tests always return 1, and C<-x> and C<-X> return 1 if any execute bit is set in the mode. Scripts run by the superuser may thus need to do a L<C<stat>|/stat FILEHANDLE> to determine the actual mode of the file, or temporarily set their effective uid to something else. If you are using ACLs, there is a pragma called L<C<filetest>|filetest> that may produce more accurate results than the bare L<C<stat>|/stat FILEHANDLE> mode bits. When under C<use filetest 'access'>, the above-mentioned filetests test whether the permission can(not) be granted using the L<access(2)> family of system calls. Also note that the C<-x> and C<-X> tests may under this pragma return true even if there are no execute permission bits set (nor any extra execute permission ACLs). This strangeness is due to the underlying system calls' definitions. Note also that, due to the implementation of C<use filetest 'access'>, the C<_> special filehandle won't cache the results of the file tests when this pragma is in effect. Read the documentation for the L<C<filetest>|filetest> pragma for more information. The C<-T> and C<-B> tests work as follows. The first block or so of the file is examined to see if it is valid UTF-8 that includes non-ASCII characters. If so, it's a C<-T> file. Otherwise, that same portion of the file is examined for odd characters such as strange control codes or characters with the high bit set. If more than a third of the characters are strange, it's a C<-B> file; otherwise it's a C<-T> file. Also, any file containing a zero byte in the examined portion is considered a binary file. (If executed within the scope of a L<S<use locale>|perllocale> which includes C<LC_CTYPE>, odd characters are anything that isn't a printable nor space in the current locale.) If C<-T> or C<-B> is used on a filehandle, the current IO buffer is examined rather than the first block. Both C<-T> and C<-B> return true on an empty file, or a file at EOF when testing a filehandle. Because you have to read a file to do the C<-T> test, on most occasions you want to use a C<-f> against the file first, as in C<next unless -f $file && -T $file>. If any of the file tests (or either the L<C<stat>|/stat FILEHANDLE> or L<C<lstat>|/lstat FILEHANDLE> operator) is given the special filehandle consisting of a solitary underline, then the stat structure of the previous file test (or L<C<stat>|/stat FILEHANDLE> operator) is used, saving a system call. (This doesn't work with C<-t>, and you need to remember that L<C<lstat>|/lstat FILEHANDLE> and C<-l> leave values in the stat structure for the symbolic link, not the real file.) (Also, if the stat buffer was filled by an L<C<lstat>|/lstat FILEHANDLE> call, C<-T> and C<-B> will reset it with the results of C<stat _>). Example: print "Can do.\n" if -r $a || -w _ || -x _; stat($filename); print "Readable\n" if -r _; print "Writable\n" if -w _; print "Executable\n" if -x _; print "Setuid\n" if -u _; print "Setgid\n" if -g _; print "Sticky\n" if -k _; print "Text\n" if -T _; print "Binary\n" if -B _; As of Perl 5.10.0, as a form of purely syntactic sugar, you can stack file test operators, in a way that C<-f -w -x $file> is equivalent to C<-x $file && -w _ && -f _>. (This is only fancy syntax: if you use the return value of C<-f $file> as an argument to another filetest operator, no special magic will happen.) Portability issues: L<perlport/-X>. To avoid confusing would-be users of your code with mysterious syntax errors, put something like this at the top of your script: use 5.010; # so filetest ops can stack =item abs VALUE X<abs> X<absolute> =item abs =for Pod::Functions absolute value function Returns the absolute value of its argument. If VALUE is omitted, uses L<C<$_>|perlvar/$_>. =item accept NEWSOCKET,GENERICSOCKET X<accept> =for Pod::Functions accept an incoming socket connect Accepts an incoming socket connect, just as L<accept(2)> does. Returns the packed address if it succeeded, false otherwise. See the example in L<perlipc/"Sockets: Client/Server Communication">. On systems that support a close-on-exec flag on files, the flag will be set for the newly opened file descriptor, as determined by the value of L<C<$^F>|perlvar/$^F>. See L<perlvar/$^F>. =item alarm SECONDS X<alarm> X<SIGALRM> X<timer> =item alarm =for Pod::Functions schedule a SIGALRM Arranges to have a SIGALRM delivered to this process after the specified number of wallclock seconds has elapsed. If SECONDS is not specified, the value stored in L<C<$_>|perlvar/$_> is used. (On some machines, unfortunately, the elapsed time may be up to one second less or more than you specified because of how seconds are counted, and process scheduling may delay the delivery of the signal even further.) Only one timer may be counting at once. Each call disables the previous timer, and an argument of C<0> may be supplied to cancel the previous timer without starting a new one. The returned value is the amount of time remaining on the previous timer. For delays of finer granularity than one second, the L<Time::HiRes> module (from CPAN, and starting from Perl 5.8 part of the standard distribution) provides L<C<ualarm>|Time::HiRes/ualarm ( $useconds [, $interval_useconds ] )>. You may also use Perl's four-argument version of L<C<select>|/select RBITS,WBITS,EBITS,TIMEOUT> leaving the first three arguments undefined, or you might be able to use the L<C<syscall>|/syscall NUMBER, LIST> interface to access L<setitimer(2)> if your system supports it. See L<perlfaq8> for details. It is usually a mistake to intermix L<C<alarm>|/alarm SECONDS> and L<C<sleep>|/sleep EXPR> calls, because L<C<sleep>|/sleep EXPR> may be internally implemented on your system with L<C<alarm>|/alarm SECONDS>. If you want to use L<C<alarm>|/alarm SECONDS> to time out a system call you need to use an L<C<eval>|/eval EXPR>/L<C<die>|/die LIST> pair. You can't rely on the alarm causing the system call to fail with L<C<$!>|perlvar/$!> set to C<EINTR> because Perl sets up signal handlers to restart system calls on some systems. Using L<C<eval>|/eval EXPR>/L<C<die>|/die LIST> always works, modulo the caveats given in L<perlipc/"Signals">. eval { local $SIG{ALRM} = sub { die "alarm\n" }; # NB: \n required alarm $timeout; my $nread = sysread $socket, $buffer, $size; alarm 0; }; if ($@) { die unless $@ eq "alarm\n"; # propagate unexpected errors # timed out } else { # didn't } For more information see L<perlipc>. Portability issues: L<perlport/alarm>. =item atan2 Y,X X<atan2> X<arctangent> X<tan> X<tangent> =for Pod::Functions arctangent of Y/X in the range -PI to PI Returns the arctangent of Y/X in the range -PI to PI. For the tangent operation, you may use the L<C<Math::Trig::tan>|Math::Trig/B<tan>> function, or use the familiar relation: sub tan { sin($_[0]) / cos($_[0]) } The return value for C<atan2(0,0)> is implementation-defined; consult your L<atan2(3)> manpage for more information. Portability issues: L<perlport/atan2>. =item bind SOCKET,NAME X<bind> =for Pod::Functions binds an address to a socket Binds a network address to a socket, just as L<bind(2)> does. Returns true if it succeeded, false otherwise. NAME should be a packed address of the appropriate type for the socket. See the examples in L<perlipc/"Sockets: Client/Server Communication">. =item binmode FILEHANDLE, LAYER X<binmode> X<binary> X<text> X<DOS> X<Windows> =item binmode FILEHANDLE =for Pod::Functions prepare binary files for I/O Arranges for FILEHANDLE to be read or written in "binary" or "text" mode on systems where the run-time libraries distinguish between binary and text files. If FILEHANDLE is an expression, the value is taken as the name of the filehandle. Returns true on success, otherwise it returns L<C<undef>|/undef EXPR> and sets L<C<$!>|perlvar/$!> (errno). On some systems (in general, DOS- and Windows-based systems) L<C<binmode>|/binmode FILEHANDLE, LAYER> is necessary when you're not working with a text file. For the sake of portability it is a good idea always to use it when appropriate, and never to use it when it isn't appropriate. Also, people can set their I/O to be by default UTF8-encoded Unicode, not bytes. In other words: regardless of platform, use L<C<binmode>|/binmode FILEHANDLE, LAYER> on binary data, like images, for example. If LAYER is present it is a single string, but may contain multiple directives. The directives alter the behaviour of the filehandle. When LAYER is present, using binmode on a text file makes sense. If LAYER is omitted or specified as C<:raw> the filehandle is made suitable for passing binary data. This includes turning off possible CRLF translation and marking it as bytes (as opposed to Unicode characters). Note that, despite what may be implied in I<"Programming Perl"> (the Camel, 3rd edition) or elsewhere, C<:raw> is I<not> simply the inverse of C<:crlf>. Other layers that would affect the binary nature of the stream are I<also> disabled. See L<PerlIO>, and the discussion about the PERLIO environment variable in L<perlrun|perlrun/PERLIO>. The C<:bytes>, C<:crlf>, C<:utf8>, and any other directives of the form C<:...>, are called I/O I<layers>. The L<open> pragma can be used to establish default I/O layers. I<The LAYER parameter of the L<C<binmode>|/binmode FILEHANDLE, LAYER> function is described as "DISCIPLINE" in "Programming Perl, 3rd Edition". However, since the publishing of this book, by many known as "Camel III", the consensus of the naming of this functionality has moved from "discipline" to "layer". All documentation of this version of Perl therefore refers to "layers" rather than to "disciplines". Now back to the regularly scheduled documentation...> To mark FILEHANDLE as UTF-8, use C<:utf8> or C<:encoding(UTF-8)>. C<:utf8> just marks the data as UTF-8 without further checking, while C<:encoding(UTF-8)> checks the data for actually being valid UTF-8. More details can be found in L<PerlIO::encoding>. In general, L<C<binmode>|/binmode FILEHANDLE, LAYER> should be called after L<C<open>|/open FILEHANDLE,MODE,EXPR> but before any I/O is done on the filehandle. Calling L<C<binmode>|/binmode FILEHANDLE, LAYER> normally flushes any pending buffered output data (and perhaps pending input data) on the handle. An exception to this is the C<:encoding> layer that changes the default character encoding of the handle. The C<:encoding> layer sometimes needs to be called in mid-stream, and it doesn't flush the stream. C<:encoding> also implicitly pushes on top of itself the C<:utf8> layer because internally Perl operates on UTF8-encoded Unicode characters. The operating system, device drivers, C libraries, and Perl run-time system all conspire to let the programmer treat a single character (C<\n>) as the line terminator, irrespective of external representation. On many operating systems, the native text file representation matches the internal representation, but on some platforms the external representation of C<\n> is made up of more than one character. All variants of Unix, Mac OS (old and new), and Stream_LF files on VMS use a single character to end each line in the external representation of text (even though that single character is CARRIAGE RETURN on old, pre-Darwin flavors of Mac OS, and is LINE FEED on Unix and most VMS files). In other systems like OS/2, DOS, and the various flavors of MS-Windows, your program sees a C<\n> as a simple C<\cJ>, but what's stored in text files are the two characters C<\cM\cJ>. That means that if you don't use L<C<binmode>|/binmode FILEHANDLE, LAYER> on these systems, C<\cM\cJ> sequences on disk will be converted to C<\n> on input, and any C<\n> in your program will be converted back to C<\cM\cJ> on output. This is what you want for text files, but it can be disastrous for binary files. Another consequence of using L<C<binmode>|/binmode FILEHANDLE, LAYER> (on some systems) is that special end-of-file markers will be seen as part of the data stream. For systems from the Microsoft family this means that, if your binary data contain C<\cZ>, the I/O subsystem will regard it as the end of the file, unless you use L<C<binmode>|/binmode FILEHANDLE, LAYER>. L<C<binmode>|/binmode FILEHANDLE, LAYER> is important not only for L<C<readline>|/readline EXPR> and L<C<print>|/print FILEHANDLE LIST> operations, but also when using L<C<read>|/read FILEHANDLE,SCALAR,LENGTH,OFFSET>, L<C<seek>|/seek FILEHANDLE,POSITION,WHENCE>, L<C<sysread>|/sysread FILEHANDLE,SCALAR,LENGTH,OFFSET>, L<C<syswrite>|/syswrite FILEHANDLE,SCALAR,LENGTH,OFFSET> and L<C<tell>|/tell FILEHANDLE> (see L<perlport> for more details). See the L<C<$E<sol>>|perlvar/$E<sol>> and L<C<$\>|perlvar/$\> variables in L<perlvar> for how to manually set your input and output line-termination sequences. Portability issues: L<perlport/binmode>. =item bless REF,CLASSNAME X<bless> =item bless REF =for Pod::Functions create an object This function tells the thingy referenced by REF that it is now an object in the CLASSNAME package. If CLASSNAME is an empty string, it is interpreted as referring to the C<main> package. If CLASSNAME is omitted, the current package is used. Because a L<C<bless>|/bless REF,CLASSNAME> is often the last thing in a constructor, it returns the reference for convenience. Always use the two-argument version if a derived class might inherit the method doing the blessing. See L<perlobj> for more about the blessing (and blessings) of objects. Consider always blessing objects in CLASSNAMEs that are mixed case. Namespaces with all lowercase names are considered reserved for Perl pragmas. Builtin types have all uppercase names. To prevent confusion, you may wish to avoid such package names as well. It is advised to avoid the class name C<0>, because much code erroneously uses the result of L<C<ref>|/ref EXPR> as a truth value. See L<perlmod/"Perl Modules">. =item break =for Pod::Functions +switch break out of a C<given> block Break out of a C<given> block. L<C<break>|/break> is available only if the L<C<"switch"> feature|feature/The 'switch' feature> is enabled or if it is prefixed with C<CORE::>. The L<C<"switch"> feature|feature/The 'switch' feature> is enabled automatically with a C<use v5.10> (or higher) declaration in the current scope. =item caller EXPR X<caller> X<call stack> X<stack> X<stack trace> =item caller =for Pod::Functions get context of the current subroutine call Returns the context of the current pure perl subroutine call. In scalar context, returns the caller's package name if there I<is> a caller (that is, if we're in a subroutine or L<C<eval>|/eval EXPR> or L<C<require>|/require VERSION>) and the undefined value otherwise. caller never returns XS subs and they are skipped. The next pure perl sub will appear instead of the XS sub in caller's return values. In list context, caller returns # 0 1 2 my ($package, $filename, $line) = caller; Like L<C<__FILE__>|/__FILE__> and L<C<__LINE__>|/__LINE__>, the filename and line number returned here may be altered by the mechanism described at L<perlsyn/"Plain Old Comments (Not!)">. With EXPR, it returns some extra information that the debugger uses to print a stack trace. The value of EXPR indicates how many call frames to go back before the current one. # 0 1 2 3 4 my ($package, $filename, $line, $subroutine, $hasargs, # 5 6 7 8 9 10 $wantarray, $evaltext, $is_require, $hints, $bitmask, $hinthash) = caller($i); Here, $subroutine is the function that the caller called (rather than the function containing the caller). Note that $subroutine may be C<(eval)> if the frame is not a subroutine call, but an L<C<eval>|/eval EXPR>. In such a case additional elements $evaltext and C<$is_require> are set: C<$is_require> is true if the frame is created by a L<C<require>|/require VERSION> or L<C<use>|/use Module VERSION LIST> statement, $evaltext contains the text of the C<eval EXPR> statement. In particular, for an C<eval BLOCK> statement, $subroutine is C<(eval)>, but $evaltext is undefined. (Note also that each L<C<use>|/use Module VERSION LIST> statement creates a L<C<require>|/require VERSION> frame inside an C<eval EXPR> frame.) $subroutine may also be C<(unknown)> if this particular subroutine happens to have been deleted from the symbol table. C<$hasargs> is true if a new instance of L<C<@_>|perlvar/@_> was set up for the frame. C<$hints> and C<$bitmask> contain pragmatic hints that the caller was compiled with. C<$hints> corresponds to L<C<$^H>|perlvar/$^H>, and C<$bitmask> corresponds to L<C<${^WARNING_BITS}>|perlvar/${^WARNING_BITS}>. The C<$hints> and C<$bitmask> values are subject to change between versions of Perl, and are not meant for external use. C<$hinthash> is a reference to a hash containing the value of L<C<%^H>|perlvar/%^H> when the caller was compiled, or L<C<undef>|/undef EXPR> if L<C<%^H>|perlvar/%^H> was empty. Do not modify the values of this hash, as they are the actual values stored in the optree. Furthermore, when called from within the DB package in list context, and with an argument, caller returns more detailed information: it sets the list variable C<@DB::args> to be the arguments with which the subroutine was invoked. Be aware that the optimizer might have optimized call frames away before L<C<caller>|/caller EXPR> had a chance to get the information. That means that C<caller(N)> might not return information about the call frame you expect it to, for C<< N > 1 >>. In particular, C<@DB::args> might have information from the previous time L<C<caller>|/caller EXPR> was called. Be aware that setting C<@DB::args> is I<best effort>, intended for debugging or generating backtraces, and should not be relied upon. In particular, as L<C<@_>|perlvar/@_> contains aliases to the caller's arguments, Perl does not take a copy of L<C<@_>|perlvar/@_>, so C<@DB::args> will contain modifications the subroutine makes to L<C<@_>|perlvar/@_> or its contents, not the original values at call time. C<@DB::args>, like L<C<@_>|perlvar/@_>, does not hold explicit references to its elements, so under certain cases its elements may have become freed and reallocated for other variables or temporary values. Finally, a side effect of the current implementation is that the effects of C<shift @_> can I<normally> be undone (but not C<pop @_> or other splicing, I<and> not if a reference to L<C<@_>|perlvar/@_> has been taken, I<and> subject to the caveat about reallocated elements), so C<@DB::args> is actually a hybrid of the current state and initial state of L<C<@_>|perlvar/@_>. Buyer beware. =item chdir EXPR X<chdir> X<cd> X<directory, change> =item chdir FILEHANDLE =item chdir DIRHANDLE =item chdir =for Pod::Functions change your current working directory Changes the working directory to EXPR, if possible. If EXPR is omitted, changes to the directory specified by C<$ENV{HOME}>, if set; if not, changes to the directory specified by C<$ENV{LOGDIR}>. (Under VMS, the variable C<$ENV{'SYS$LOGIN'}> is also checked, and used if it is set.) If neither is set, L<C<chdir>|/chdir EXPR> does nothing and fails. It returns true on success, false otherwise. See the example under L<C<die>|/die LIST>. On systems that support L<fchdir(2)>, you may pass a filehandle or directory handle as the argument. On systems that don't support L<fchdir(2)>, passing handles raises an exception. =item chmod LIST X<chmod> X<permission> X<mode> =for Pod::Functions changes the permissions on a list of files Changes the permissions of a list of files. The first element of the list must be the numeric mode, which should probably be an octal number, and which definitely should I<not> be a string of octal digits: C<0644> is okay, but C<"0644"> is not. Returns the number of files successfully changed. See also L<C<oct>|/oct EXPR> if all you have is a string. my $cnt = chmod 0755, "foo", "bar"; chmod 0755, @executables; my $mode = "0644"; chmod $mode, "foo"; # !!! sets mode to # --w----r-T my $mode = "0644"; chmod oct($mode), "foo"; # this is better my $mode = 0644; chmod $mode, "foo"; # this is best On systems that support L<fchmod(2)>, you may pass filehandles among the files. On systems that don't support L<fchmod(2)>, passing filehandles raises an exception. Filehandles must be passed as globs or glob references to be recognized; barewords are considered filenames. open(my $fh, "<", "foo"); my $perm = (stat $fh)[2] & 07777; chmod($perm | 0600, $fh); You can also import the symbolic C<S_I*> constants from the L<C<Fcntl>|Fcntl> module: use Fcntl qw( :mode ); chmod S_IRWXU|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH, @executables; # Identical to the chmod 0755 of the example above. Portability issues: L<perlport/chmod>. =item chomp VARIABLE X<chomp> X<INPUT_RECORD_SEPARATOR> X<$/> X<newline> X<eol> =item chomp( LIST ) =item chomp =for Pod::Functions remove a trailing record separator from a string This safer version of L<C<chop>|/chop VARIABLE> removes any trailing string that corresponds to the current value of L<C<$E<sol>>|perlvar/$E<sol>> (also known as C<$INPUT_RECORD_SEPARATOR> in the L<C<English>|English> module). It returns the total number of characters removed from all its arguments. It's often used to remove the newline from the end of an input record when you're worried that the final record may be missing its newline. When in paragraph mode (C<$/ = ''>), it removes all trailing newlines from the string. When in slurp mode (C<$/ = undef>) or fixed-length record mode (L<C<$E<sol>>|perlvar/$E<sol>> is a reference to an integer or the like; see L<perlvar>), L<C<chomp>|/chomp VARIABLE> won't remove anything. If VARIABLE is omitted, it chomps L<C<$_>|perlvar/$_>. Example: while (<>) { chomp; # avoid \n on last field my @array = split(/:/); # ... } If VARIABLE is a hash, it chomps the hash's values, but not its keys, resetting the L<C<each>|/each HASH> iterator in the process. You can actually chomp anything that's an lvalue, including an assignment: chomp(my $cwd = `pwd`); chomp(my $answer = <STDIN>); If you chomp a list, each element is chomped, and the total number of characters removed is returned. Note that parentheses are necessary when you're chomping anything that is not a simple variable. This is because C<chomp $cwd = `pwd`;> is interpreted as C<(chomp $cwd) = `pwd`;>, rather than as C<chomp( $cwd = `pwd` )> which you might expect. Similarly, C<chomp $a, $b> is interpreted as C<chomp($a), $b> rather than as C<chomp($a, $b)>. =item chop VARIABLE X<chop> =item chop( LIST ) =item chop =for Pod::Functions remove the last character from a string Chops off the last character of a string and returns the character chopped. It is much more efficient than C<s/.$//s> because it neither scans nor copies the string. If VARIABLE is omitted, chops L<C<$_>|perlvar/$_>. If VARIABLE is a hash, it chops the hash's values, but not its keys, resetting the L<C<each>|/each HASH> iterator in the process. You can actually chop anything that's an lvalue, including an assignment. If you chop a list, each element is chopped. Only the value of the last L<C<chop>|/chop VARIABLE> is returned. Note that L<C<chop>|/chop VARIABLE> returns the last character. To return all but the last character, use C<substr($string, 0, -1)>. See also L<C<chomp>|/chomp VARIABLE>. =item chown LIST X<chown> X<owner> X<user> X<group> =for Pod::Functions change the ownership on a list of files Changes the owner (and group) of a list of files. The first two elements of the list must be the I<numeric> uid and gid, in that order. A value of -1 in either position is interpreted by most systems to leave that value unchanged. Returns the number of files successfully changed. my $cnt = chown $uid, $gid, 'foo', 'bar'; chown $uid, $gid, @filenames; On systems that support L<fchown(2)>, you may pass filehandles among the files. On systems that don't support L<fchown(2)>, passing filehandles raises an exception. Filehandles must be passed as globs or glob references to be recognized; barewords are considered filenames. Here's an example that looks up nonnumeric uids in the passwd file: print "User: "; chomp(my $user = <STDIN>); print "Files: "; chomp(my $pattern = <STDIN>); my ($login,$pass,$uid,$gid) = getpwnam($user) or die "$user not in passwd file"; my @ary = glob($pattern); # expand filenames chown $uid, $gid, @ary; On most systems, you are not allowed to change the ownership of the file unless you're the superuser, although you should be able to change the group to any of your secondary groups. On insecure systems, these restrictions may be relaxed, but this is not a portable assumption. On POSIX systems, you can detect this condition this way: use POSIX qw(sysconf _PC_CHOWN_RESTRICTED); my $can_chown_giveaway = ! sysconf(_PC_CHOWN_RESTRICTED); Portability issues: L<perlport/chown>. =item chr NUMBER X<chr> X<character> X<ASCII> X<Unicode> =item chr =for Pod::Functions get character this number represents Returns the character represented by that NUMBER in the character set. For example, C<chr(65)> is C<"A"> in either ASCII or Unicode, and chr(0x263a) is a Unicode smiley face. Negative values give the Unicode replacement character (chr(0xfffd)), except under the L<bytes> pragma, where the low eight bits of the value (truncated to an integer) are used. If NUMBER is omitted, uses L<C<$_>|perlvar/$_>. For the reverse, use L<C<ord>|/ord EXPR>. Note that characters from 128 to 255 (inclusive) are by default internally not encoded as UTF-8 for backward compatibility reasons. See L<perlunicode> for more about Unicode. =item chroot FILENAME X<chroot> X<root> =item chroot =for Pod::Functions make directory new root for path lookups This function works like the system call by the same name: it makes the named directory the new root directory for all further pathnames that begin with a C</> by your process and all its children. (It doesn't change your current working directory, which is unaffected.) For security reasons, this call is restricted to the superuser. If FILENAME is omitted, does a L<C<chroot>|/chroot FILENAME> to L<C<$_>|perlvar/$_>. B<NOTE:> It is mandatory for security to C<chdir("/")> (L<C<chdir>|/chdir EXPR> to the root directory) immediately after a L<C<chroot>|/chroot FILENAME>, otherwise the current working directory may be outside of the new root. Portability issues: L<perlport/chroot>. =item close FILEHANDLE X<close> =item close =for Pod::Functions close file (or pipe or socket) handle Closes the file or pipe associated with the filehandle, flushes the IO buffers, and closes the system file descriptor. Returns true if those operations succeed and if no error was reported by any PerlIO layer. Closes the currently selected filehandle if the argument is omitted. You don't have to close FILEHANDLE if you are immediately going to do another L<C<open>|/open FILEHANDLE,MODE,EXPR> on it, because L<C<open>|/open FILEHANDLE,MODE,EXPR> closes it for you. (See L<C<open>|/open FILEHANDLE,MODE,EXPR>.) However, an explicit L<C<close>|/close FILEHANDLE> on an input file resets the line counter (L<C<$.>|perlvar/$.>), while the implicit close done by L<C<open>|/open FILEHANDLE,MODE,EXPR> does not. If the filehandle came from a piped open, L<C<close>|/close FILEHANDLE> returns false if one of the other syscalls involved fails or if its program exits with non-zero status. If the only problem was that the program exited non-zero, L<C<$!>|perlvar/$!> will be set to C<0>. Closing a pipe also waits for the process executing on the pipe to exit--in case you wish to look at the output of the pipe afterwards--and implicitly puts the exit status value of that command into L<C<$?>|perlvar/$?> and L<C<${^CHILD_ERROR_NATIVE}>|perlvar/${^CHILD_ERROR_NATIVE}>. If there are multiple threads running, L<C<close>|/close FILEHANDLE> on a filehandle from a piped open returns true without waiting for the child process to terminate, if the filehandle is still open in another thread. Closing the read end of a pipe before the process writing to it at the other end is done writing results in the writer receiving a SIGPIPE. If the other end can't handle that, be sure to read all the data before closing the pipe. Example: open(OUTPUT, '|sort >foo') # pipe to sort or die "Can't start sort: $!"; #... # print stuff to output close OUTPUT # wait for sort to finish or warn $! ? "Error closing sort pipe: $!" : "Exit status $? from sort"; open(INPUT, 'foo') # get sort's results or die "Can't open 'foo' for input: $!"; FILEHANDLE may be an expression whose value can be used as an indirect filehandle, usually the real filehandle name or an autovivified handle. =item closedir DIRHANDLE X<closedir> =for Pod::Functions close directory handle Closes a directory opened by L<C<opendir>|/opendir DIRHANDLE,EXPR> and returns the success of that system call. =item connect SOCKET,NAME X<connect> =for Pod::Functions connect to a remote socket Attempts to connect to a remote socket, just like L<connect(2)>. Returns true if it succeeded, false otherwise. NAME should be a packed address of the appropriate type for the socket. See the examples in L<perlipc/"Sockets: Client/Server Communication">. =item continue BLOCK X<continue> =item continue =for Pod::Functions optional trailing block in a while or foreach When followed by a BLOCK, L<C<continue>|/continue BLOCK> is actually a flow control statement rather than a function. If there is a L<C<continue>|/continue BLOCK> BLOCK attached to a BLOCK (typically in a C<while> or C<foreach>), it is always executed just before the conditional is about to be evaluated again, just like the third part of a C<for> loop in C. Thus it can be used to increment a loop variable, even when the loop has been continued via the L<C<next>|/next LABEL> statement (which is similar to the C L<C<continue>|/continue BLOCK> statement). L<C<last>|/last LABEL>, L<C<next>|/next LABEL>, or L<C<redo>|/redo LABEL> may appear within a L<C<continue>|/continue BLOCK> block; L<C<last>|/last LABEL> and L<C<redo>|/redo LABEL> behave as if they had been executed within the main block. So will L<C<next>|/next LABEL>, but since it will execute a L<C<continue>|/continue BLOCK> block, it may be more entertaining. while (EXPR) { ### redo always comes here do_something; } continue { ### next always comes here do_something_else; # then back the top to re-check EXPR } ### last always comes here Omitting the L<C<continue>|/continue BLOCK> section is equivalent to using an empty one, logically enough, so L<C<next>|/next LABEL> goes directly back to check the condition at the top of the loop. When there is no BLOCK, L<C<continue>|/continue BLOCK> is a function that falls through the current C<when> or C<default> block instead of iterating a dynamically enclosing C<foreach> or exiting a lexically enclosing C<given>. In Perl 5.14 and earlier, this form of L<C<continue>|/continue BLOCK> was only available when the L<C<"switch"> feature|feature/The 'switch' feature> was enabled. See L<feature> and L<perlsyn/"Switch Statements"> for more information. =item cos EXPR X<cos> X<cosine> X<acos> X<arccosine> =item cos =for Pod::Functions cosine function Returns the cosine of EXPR (expressed in radians). If EXPR is omitted, takes the cosine of L<C<$_>|perlvar/$_>. For the inverse cosine operation, you may use the L<C<Math::Trig::acos>|Math::Trig> function, or use this relation: sub acos { atan2( sqrt(1 - $_[0] * $_[0]), $_[0] ) } =item crypt PLAINTEXT,SALT X<crypt> X<digest> X<hash> X<salt> X<plaintext> X<password> X<decrypt> X<cryptography> X<passwd> X<encrypt> =for Pod::Functions one-way passwd-style encryption Creates a digest string exactly like the L<crypt(3)> function in the C library (assuming that you actually have a version there that has not been extirpated as a potential munition). L<C<crypt>|/crypt PLAINTEXT,SALT> is a one-way hash function. The PLAINTEXT and SALT are turned into a short string, called a digest, which is returned. The same PLAINTEXT and SALT will always return the same string, but there is no (known) way to get the original PLAINTEXT from the hash. Small changes in the PLAINTEXT or SALT will result in large changes in the digest. There is no decrypt function. This function isn't all that useful for cryptography (for that, look for F<Crypt> modules on your nearby CPAN mirror) and the name "crypt" is a bit of a misnomer. Instead it is primarily used to check if two pieces of text are the same without having to transmit or store the text itself. An example is checking if a correct password is given. The digest of the password is stored, not the password itself. The user types in a password that is L<C<crypt>|/crypt PLAINTEXT,SALT>'d with the same salt as the stored digest. If the two digests match, the password is correct. When verifying an existing digest string you should use the digest as the salt (like C<crypt($plain, $digest) eq $digest>). The SALT used to create the digest is visible as part of the digest. This ensures L<C<crypt>|/crypt PLAINTEXT,SALT> will hash the new string with the same salt as the digest. This allows your code to work with the standard L<C<crypt>|/crypt PLAINTEXT,SALT> and with more exotic implementations. In other words, assume nothing about the returned string itself nor about how many bytes of SALT may matter. Traditionally the result is a string of 13 bytes: two first bytes of the salt, followed by 11 bytes from the set C<[./0-9A-Za-z]>, and only the first eight bytes of PLAINTEXT mattered. But alternative hashing schemes (like MD5), higher level security schemes (like C2), and implementations on non-Unix platforms may produce different strings. When choosing a new salt create a random two character string whose characters come from the set C<[./0-9A-Za-z]> (like C<join '', ('.', '/', 0..9, 'A'..'Z', 'a'..'z')[rand 64, rand 64]>). This set of characters is just a recommendation; the characters allowed in the salt depend solely on your system's crypt library, and Perl can't restrict what salts L<C<crypt>|/crypt PLAINTEXT,SALT> accepts. Here's an example that makes sure that whoever runs this program knows their password: my $pwd = (getpwuid($<))[1]; system "stty -echo"; print "Password: "; chomp(my $word = <STDIN>); print "\n"; system "stty echo"; if (crypt($word, $pwd) ne $pwd) { die "Sorry...\n"; } else { print "ok\n"; } Of course, typing in your own password to whoever asks you for it is unwise. The L<C<crypt>|/crypt PLAINTEXT,SALT> function is unsuitable for hashing large quantities of data, not least of all because you can't get the information back. Look at the L<Digest> module for more robust algorithms. If using L<C<crypt>|/crypt PLAINTEXT,SALT> on a Unicode string (which I<potentially> has characters with codepoints above 255), Perl tries to make sense of the situation by trying to downgrade (a copy of) the string back to an eight-bit byte string before calling L<C<crypt>|/crypt PLAINTEXT,SALT> (on that copy). If that works, good. If not, L<C<crypt>|/crypt PLAINTEXT,SALT> dies with L<C<Wide character in crypt>|perldiag/Wide character in %s>. Portability issues: L<perlport/crypt>. =item dbmclose HASH X<dbmclose> =for Pod::Functions breaks binding on a tied dbm file [This function has been largely superseded by the L<C<untie>|/untie VARIABLE> function.] Breaks the binding between a DBM file and a hash. Portability issues: L<perlport/dbmclose>. =item dbmopen HASH,DBNAME,MASK X<dbmopen> X<dbm> X<ndbm> X<sdbm> X<gdbm> =for Pod::Functions create binding on a tied dbm file [This function has been largely superseded by the L<C<tie>|/tie VARIABLE,CLASSNAME,LIST> function.] This binds a L<dbm(3)>, L<ndbm(3)>, L<sdbm(3)>, L<gdbm(3)>, or Berkeley DB file to a hash. HASH is the name of the hash. (Unlike normal L<C<open>|/open FILEHANDLE,MODE,EXPR>, the first argument is I<not> a filehandle, even though it looks like one). DBNAME is the name of the database (without the F<.dir> or F<.pag> extension if any). If the database does not exist, it is created with protection specified by MASK (as modified by the L<C<umask>|/umask EXPR>). To prevent creation of the database if it doesn't exist, you may specify a MODE of 0, and the function will return a false value if it can't find an existing database. If your system supports only the older DBM functions, you may make only one L<C<dbmopen>|/dbmopen HASH,DBNAME,MASK> call in your program. In older versions of Perl, if your system had neither DBM nor ndbm, calling L<C<dbmopen>|/dbmopen HASH,DBNAME,MASK> produced a fatal error; it now falls back to L<sdbm(3)>. If you don't have write access to the DBM file, you can only read hash variables, not set them. If you want to test whether you can write, either use file tests or try setting a dummy hash entry inside an L<C<eval>|/eval EXPR> to trap the error. Note that functions such as L<C<keys>|/keys HASH> and L<C<values>|/values HASH> may return huge lists when used on large DBM files. You may prefer to use the L<C<each>|/each HASH> function to iterate over large DBM files. Example: # print out history file offsets dbmopen(%HIST,'/usr/lib/news/history',0666); while (($key,$val) = each %HIST) { print $key, ' = ', unpack('L',$val), "\n"; } dbmclose(%HIST); See also L<AnyDBM_File> for a more general description of the pros and cons of the various dbm approaches, as well as L<DB_File> for a particularly rich implementation. You can control which DBM library you use by loading that library before you call L<C<dbmopen>|/dbmopen HASH,DBNAME,MASK>: use DB_File; dbmopen(%NS_Hist, "$ENV{HOME}/.netscape/history.db") or die "Can't open netscape history file: $!"; Portability issues: L<perlport/dbmopen>. =item defined EXPR X<defined> X<undef> X<undefined> =item defined =for Pod::Functions test whether a value, variable, or function is defined Returns a Boolean value telling whether EXPR has a value other than the undefined value L<C<undef>|/undef EXPR>. If EXPR is not present, L<C<$_>|perlvar/$_> is checked. Many operations return L<C<undef>|/undef EXPR> to indicate failure, end of file, system error, uninitialized variable, and other exceptional conditions. This function allows you to distinguish L<C<undef>|/undef EXPR> from other values. (A simple Boolean test will not distinguish among L<C<undef>|/undef EXPR>, zero, the empty string, and C<"0">, which are all equally false.) Note that since L<C<undef>|/undef EXPR> is a valid scalar, its presence doesn't I<necessarily> indicate an exceptional condition: L<C<pop>|/pop ARRAY> returns L<C<undef>|/undef EXPR> when its argument is an empty array, I<or> when the element to return happens to be L<C<undef>|/undef EXPR>. You may also use C<defined(&func)> to check whether subroutine C<func> has ever been defined. The return value is unaffected by any forward declarations of C<func>. A subroutine that is not defined may still be callable: its package may have an C<AUTOLOAD> method that makes it spring into existence the first time that it is called; see L<perlsub>. Use of L<C<defined>|/defined EXPR> on aggregates (hashes and arrays) is no longer supported. It used to report whether memory for that aggregate had ever been allocated. You should instead use a simple test for size: if (@an_array) { print "has array elements\n" } if (%a_hash) { print "has hash members\n" } When used on a hash element, it tells you whether the value is defined, not whether the key exists in the hash. Use L<C<exists>|/exists EXPR> for the latter purpose. Examples: print if defined $switch{D}; print "$val\n" while defined($val = pop(@ary)); die "Can't readlink $sym: $!" unless defined($value = readlink $sym); sub foo { defined &$bar ? $bar->(@_) : die "No bar"; } $debugging = 0 unless defined $debugging; Note: Many folks tend to overuse L<C<defined>|/defined EXPR> and are then surprised to discover that the number C<0> and C<""> (the zero-length string) are, in fact, defined values. For example, if you say "ab" =~ /a(.*)b/; The pattern match succeeds and C<$1> is defined, although it matched "nothing". It didn't really fail to match anything. Rather, it matched something that happened to be zero characters long. This is all very above-board and honest. When a function returns an undefined value, it's an admission that it couldn't give you an honest answer. So you should use L<C<defined>|/defined EXPR> only when questioning the integrity of what you're trying to do. At other times, a simple comparison to C<0> or C<""> is what you want. See also L<C<undef>|/undef EXPR>, L<C<exists>|/exists EXPR>, L<C<ref>|/ref EXPR>. =item delete EXPR X<delete> =for Pod::Functions deletes a value from a hash Given an expression that specifies an element or slice of a hash, L<C<delete>|/delete EXPR> deletes the specified elements from that hash so that L<C<exists>|/exists EXPR> on that element no longer returns true. Setting a hash element to the undefined value does not remove its key, but deleting it does; see L<C<exists>|/exists EXPR>. In list context, usually returns the value or values deleted, or the last such element in scalar context. The return list's length corresponds to that of the argument list: deleting non-existent elements returns the undefined value in their corresponding positions. When a L<keyE<sol>value hash slice|perldata/KeyE<sol>Value Hash Slices> is passed to C<delete>, the return value is a list of key/value pairs (two elements for each item deleted from the hash). L<C<delete>|/delete EXPR> may also be used on arrays and array slices, but its behavior is less straightforward. Although L<C<exists>|/exists EXPR> will return false for deleted entries, deleting array elements never changes indices of existing values; use L<C<shift>|/shift ARRAY> or L<C<splice>|/splice ARRAY,OFFSET,LENGTH,LIST> for that. However, if any deleted elements fall at the end of an array, the array's size shrinks to the position of the highest element that still tests true for L<C<exists>|/exists EXPR>, or to 0 if none do. In other words, an array won't have trailing nonexistent elements after a delete. B<WARNING:> Calling L<C<delete>|/delete EXPR> on array values is strongly discouraged. The notion of deleting or checking the existence of Perl array elements is not conceptually coherent, and can lead to surprising behavior. Deleting from L<C<%ENV>|perlvar/%ENV> modifies the environment. Deleting from a hash tied to a DBM file deletes the entry from the DBM file. Deleting from a L<C<tied>|/tied VARIABLE> hash or array may not necessarily return anything; it depends on the implementation of the L<C<tied>|/tied VARIABLE> package's DELETE method, which may do whatever it pleases. The C<delete local EXPR> construct localizes the deletion to the current block at run time. Until the block exits, elements locally deleted temporarily no longer exist. See L<perlsub/"Localized deletion of elements of composite types">. my %hash = (foo => 11, bar => 22, baz => 33); my $scalar = delete $hash{foo}; # $scalar is 11 $scalar = delete @hash{qw(foo bar)}; # $scalar is 22 my @array = delete @hash{qw(foo baz)}; # @array is (undef,33) The following (inefficiently) deletes all the values of %HASH and @ARRAY: foreach my $key (keys %HASH) { delete $HASH{$key}; } foreach my $index (0 .. $#ARRAY) { delete $ARRAY[$index]; } And so do these: delete @HASH{keys %HASH}; delete @ARRAY[0 .. $#ARRAY]; But both are slower than assigning the empty list or undefining %HASH or @ARRAY, which is the customary way to empty out an aggregate: %HASH = (); # completely empty %HASH undef %HASH; # forget %HASH ever existed @ARRAY = (); # completely empty @ARRAY undef @ARRAY; # forget @ARRAY ever existed The EXPR can be arbitrarily complicated provided its final operation is an element or slice of an aggregate: delete $ref->[$x][$y]{$key}; delete @{$ref->[$x][$y]}{$key1, $key2, @morekeys}; delete $ref->[$x][$y][$index]; delete @{$ref->[$x][$y]}[$index1, $index2, @moreindices]; =item die LIST X<die> X<throw> X<exception> X<raise> X<$@> X<abort> =for Pod::Functions raise an exception or bail out L<C<die>|/die LIST> raises an exception. Inside an L<C<eval>|/eval EXPR> the exception is stuffed into L<C<$@>|perlvar/$@> and the L<C<eval>|/eval EXPR> is terminated with the undefined value. If the exception is outside of all enclosing L<C<eval>|/eval EXPR>s, then the uncaught exception is printed to C<STDERR> and perl exits with an exit code indicating failure. If you need to exit the process with a specific exit code, see L<C<exit>|/exit EXPR>. Equivalent examples: die "Can't cd to spool: $!\n" unless chdir '/usr/spool/news'; chdir '/usr/spool/news' or die "Can't cd to spool: $!\n" Most of the time, C<die> is called with a string to use as the exception. You may either give a single non-reference operand to serve as the exception, or a list of two or more items, which will be stringified and concatenated to make the exception. If the string exception does not end in a newline, the current script line number and input line number (if any) and a newline are appended to it. Note that the "input line number" (also known as "chunk") is subject to whatever notion of "line" happens to be currently in effect, and is also available as the special variable L<C<$.>|perlvar/$.>. See L<perlvar/"$/"> and L<perlvar/"$.">. Hint: sometimes appending C<", stopped"> to your message will cause it to make better sense when the string C<"at foo line 123"> is appended. Suppose you are running script "canasta". die "/etc/games is no good"; die "/etc/games is no good, stopped"; produce, respectively /etc/games is no good at canasta line 123. /etc/games is no good, stopped at canasta line 123. If LIST was empty or made an empty string, and L<C<$@>|perlvar/$@> already contains an exception value (typically from a previous L<C<eval>|/eval EXPR>), then that value is reused after appending C<"\t...propagated">. This is useful for propagating exceptions: eval { ... }; die unless $@ =~ /Expected exception/; If LIST was empty or made an empty string, and L<C<$@>|perlvar/$@> contains an object reference that has a C<PROPAGATE> method, that method will be called with additional file and line number parameters. The return value replaces the value in L<C<$@>|perlvar/$@>; i.e., as if C<< $@ = eval { $@->PROPAGATE(__FILE__, __LINE__) }; >> were called. If LIST was empty or made an empty string, and L<C<$@>|perlvar/$@> is also empty, then the string C<"Died"> is used. You can also call L<C<die>|/die LIST> with a reference argument, and if this is trapped within an L<C<eval>|/eval EXPR>, L<C<$@>|perlvar/$@> contains that reference. This permits more elaborate exception handling using objects that maintain arbitrary state about the exception. Such a scheme is sometimes preferable to matching particular string values of L<C<$@>|perlvar/$@> with regular expressions. Because Perl stringifies uncaught exception messages before display, you'll probably want to overload stringification operations on exception objects. See L<overload> for details about that. The stringified message should be non-empty, and should end in a newline, in order to fit in with the treatment of string exceptions. Also, because an exception object reference cannot be stringified without destroying it, Perl doesn't attempt to append location or other information to a reference exception. If you want location information with a complex exception object, you'll have to arrange to put the location information into the object yourself. Because L<C<$@>|perlvar/$@> is a global variable, be careful that analyzing an exception caught by C<eval> doesn't replace the reference in the global variable. It's easiest to make a local copy of the reference before any manipulations. Here's an example: use Scalar::Util "blessed"; eval { ... ; die Some::Module::Exception->new( FOO => "bar" ) }; if (my $ev_err = $@) { if (blessed($ev_err) && $ev_err->isa("Some::Module::Exception")) { # handle Some::Module::Exception } else { # handle all other possible exceptions } } If an uncaught exception results in interpreter exit, the exit code is determined from the values of L<C<$!>|perlvar/$!> and L<C<$?>|perlvar/$?> with this pseudocode: exit $! if $!; # errno exit $? >> 8 if $? >> 8; # child exit status exit 255; # last resort As with L<C<exit>|/exit EXPR>, L<C<$?>|perlvar/$?> is set prior to unwinding the call stack; any C<DESTROY> or C<END> handlers can then alter this value, and thus Perl's exit code. The intent is to squeeze as much possible information about the likely cause into the limited space of the system exit code. However, as L<C<$!>|perlvar/$!> is the value of C's C<errno>, which can be set by any system call, this means that the value of the exit code used by L<C<die>|/die LIST> can be non-predictable, so should not be relied upon, other than to be non-zero. You can arrange for a callback to be run just before the L<C<die>|/die LIST> does its deed, by setting the L<C<$SIG{__DIE__}>|perlvar/%SIG> hook. The associated handler is called with the exception as an argument, and can change the exception, if it sees fit, by calling L<C<die>|/die LIST> again. See L<perlvar/%SIG> for details on setting L<C<%SIG>|perlvar/%SIG> entries, and L<C<eval>|/eval EXPR> for some examples. Although this feature was to be run only right before your program was to exit, this is not currently so: the L<C<$SIG{__DIE__}>|perlvar/%SIG> hook is currently called even inside L<C<eval>|/eval EXPR>ed blocks/strings! If one wants the hook to do nothing in such situations, put die @_ if $^S; as the first line of the handler (see L<perlvar/$^S>). Because this promotes strange action at a distance, this counterintuitive behavior may be fixed in a future release. See also L<C<exit>|/exit EXPR>, L<C<warn>|/warn LIST>, and the L<Carp> module. =item do BLOCK X<do> X<block> =for Pod::Functions turn a BLOCK into a TERM Not really a function. Returns the value of the last command in the sequence of commands indicated by BLOCK. When modified by the C<while> or C<until> loop modifier, executes the BLOCK once before testing the loop condition. (On other statements the loop modifiers test the conditional first.) C<do BLOCK> does I<not> count as a loop, so the loop control statements L<C<next>|/next LABEL>, L<C<last>|/last LABEL>, or L<C<redo>|/redo LABEL> cannot be used to leave or restart the block. See L<perlsyn> for alternative strategies. =item do EXPR X<do> Uses the value of EXPR as a filename and executes the contents of the file as a Perl script: # load the exact specified file (./ and ../ special-cased) do '/foo/stat.pl'; do './stat.pl'; do '../foo/stat.pl'; # search for the named file within @INC do 'stat.pl'; do 'foo/stat.pl'; C<do './stat.pl'> is largely like eval `cat stat.pl`; except that it's more concise, runs no external processes, and keeps track of the current filename for error messages. It also differs in that code evaluated with C<do FILE> cannot see lexicals in the enclosing scope; C<eval STRING> does. It's the same, however, in that it does reparse the file every time you call it, so you probably don't want to do this inside a loop. Using C<do> with a relative path (except for F<./> and F<../>), like do 'foo/stat.pl'; will search the L<C<@INC>|perlvar/@INC> directories, and update L<C<%INC>|perlvar/%INC> if the file is found. See L<perlvar/@INC> and L<perlvar/%INC> for these variables. In particular, note that whilst historically L<C<@INC>|perlvar/@INC> contained '.' (the current directory) making these two cases equivalent, that is no longer necessarily the case, as '.' is not included in C<@INC> by default in perl versions 5.26.0 onwards. Instead, perl will now warn: do "stat.pl" failed, '.' is no longer in @INC; did you mean do "./stat.pl"? If L<C<do>|/do EXPR> can read the file but cannot compile it, it returns L<C<undef>|/undef EXPR> and sets an error message in L<C<$@>|perlvar/$@>. If L<C<do>|/do EXPR> cannot read the file, it returns undef and sets L<C<$!>|perlvar/$!> to the error. Always check L<C<$@>|perlvar/$@> first, as compilation could fail in a way that also sets L<C<$!>|perlvar/$!>. If the file is successfully compiled, L<C<do>|/do EXPR> returns the value of the last expression evaluated. Inclusion of library modules is better done with the L<C<use>|/use Module VERSION LIST> and L<C<require>|/require VERSION> operators, which also do automatic error checking and raise an exception if there's a problem. You might like to use L<C<do>|/do EXPR> to read in a program configuration file. Manual error checking can be done this way: # Read in config files: system first, then user. # Beware of using relative pathnames here. for $file ("/share/prog/defaults.rc", "$ENV{HOME}/.someprogrc") { unless ($return = do $file) { warn "couldn't parse $file: $@" if $@; warn "couldn't do $file: $!" unless defined $return; warn "couldn't run $file" unless $return; } } =item dump LABEL X<dump> X<core> X<undump> =item dump EXPR =item dump =for Pod::Functions create an immediate core dump This function causes an immediate core dump. See also the B<-u> command-line switch in L<perlrun|perlrun/-u>, which does the same thing. Primarily this is so that you can use the B<undump> program (not supplied) to turn your core dump into an executable binary after having initialized all your variables at the beginning of the program. When the new binary is executed it will begin by executing a C<goto LABEL> (with all the restrictions that L<C<goto>|/goto LABEL> suffers). Think of it as a goto with an intervening core dump and reincarnation. If C<LABEL> is omitted, restarts the program from the top. The C<dump EXPR> form, available starting in Perl 5.18.0, allows a name to be computed at run time, being otherwise identical to C<dump LABEL>. B<WARNING>: Any files opened at the time of the dump will I<not> be open any more when the program is reincarnated, with possible resulting confusion by Perl. This function is now largely obsolete, mostly because it's very hard to convert a core file into an executable. As of Perl 5.30, it must be invoked as C<CORE::dump()>. Unlike most named operators, this has the same precedence as assignment. It is also exempt from the looks-like-a-function rule, so C<dump ("foo")."bar"> will cause "bar" to be part of the argument to L<C<dump>|/dump LABEL>. Portability issues: L<perlport/dump>. =item each HASH X<each> X<hash, iterator> =item each ARRAY X<array, iterator> =for Pod::Functions retrieve the next key/value pair from a hash When called on a hash in list context, returns a 2-element list consisting of the key and value for the next element of a hash. In Perl 5.12 and later only, it will also return the index and value for the next element of an array so that you can iterate over it; older Perls consider this a syntax error. When called in scalar context, returns only the key (not the value) in a hash, or the index in an array. Hash entries are returned in an apparently random order. The actual random order is specific to a given hash; the exact same series of operations on two hashes may result in a different order for each hash. Any insertion into the hash may change the order, as will any deletion, with the exception that the most recent key returned by L<C<each>|/each HASH> or L<C<keys>|/keys HASH> may be deleted without changing the order. So long as a given hash is unmodified you may rely on L<C<keys>|/keys HASH>, L<C<values>|/values HASH> and L<C<each>|/each HASH> to repeatedly return the same order as each other. See L<perlsec/"Algorithmic Complexity Attacks"> for details on why hash order is randomized. Aside from the guarantees provided here the exact details of Perl's hash algorithm and the hash traversal order are subject to change in any release of Perl. After L<C<each>|/each HASH> has returned all entries from the hash or array, the next call to L<C<each>|/each HASH> returns the empty list in list context and L<C<undef>|/undef EXPR> in scalar context; the next call following I<that> one restarts iteration. Each hash or array has its own internal iterator, accessed by L<C<each>|/each HASH>, L<C<keys>|/keys HASH>, and L<C<values>|/values HASH>. The iterator is implicitly reset when L<C<each>|/each HASH> has reached the end as just described; it can be explicitly reset by calling L<C<keys>|/keys HASH> or L<C<values>|/values HASH> on the hash or array, or by referencing the hash (but not array) in list context. If you add or delete a hash's elements while iterating over it, the effect on the iterator is unspecified; for example, entries may be skipped or duplicated--so don't do that. Exception: It is always safe to delete the item most recently returned by L<C<each>|/each HASH>, so the following code works properly: while (my ($key, $value) = each %hash) { print $key, "\n"; delete $hash{$key}; # This is safe } Tied hashes may have a different ordering behaviour to perl's hash implementation. The iterator used by C<each> is attached to the hash or array, and is shared between all iteration operations applied to the same hash or array. Thus all uses of C<each> on a single hash or array advance the same iterator location. All uses of C<each> are also subject to having the iterator reset by any use of C<keys> or C<values> on the same hash or array, or by the hash (but not array) being referenced in list context. This makes C<each>-based loops quite fragile: it is easy to arrive at such a loop with the iterator already part way through the object, or to accidentally clobber the iterator state during execution of the loop body. It's easy enough to explicitly reset the iterator before starting a loop, but there is no way to insulate the iterator state used by a loop from the iterator state used by anything else that might execute during the loop body. To avoid these problems, use a C<foreach> loop rather than C<while>-C<each>. This prints out your environment like the L<printenv(1)> program, but in a different order: while (my ($key,$value) = each %ENV) { print "$key=$value\n"; } Starting with Perl 5.14, an experimental feature allowed L<C<each>|/each HASH> to take a scalar expression. This experiment has been deemed unsuccessful, and was removed as of Perl 5.24. As of Perl 5.18 you can use a bare L<C<each>|/each HASH> in a C<while> loop, which will set L<C<$_>|perlvar/$_> on every iteration. If either an C<each> expression or an explicit assignment of an C<each> expression to a scalar is used as a C<while>/C<for> condition, then the condition actually tests for definedness of the expression's value, not for its regular truth value. while (each %ENV) { print "$_=$ENV{$_}\n"; } To avoid confusing would-be users of your code who are running earlier versions of Perl with mysterious syntax errors, put this sort of thing at the top of your file to signal that your code will work I<only> on Perls of a recent vintage: use 5.012; # so keys/values/each work on arrays use 5.018; # so each assigns to $_ in a lone while test See also L<C<keys>|/keys HASH>, L<C<values>|/values HASH>, and L<C<sort>|/sort SUBNAME LIST>. =item eof FILEHANDLE X<eof> X<end of file> X<end-of-file> =item eof () =item eof =for Pod::Functions test a filehandle for its end Returns 1 if the next read on FILEHANDLE will return end of file I<or> if FILEHANDLE is not open. FILEHANDLE may be an expression whose value gives the real filehandle. (Note that this function actually reads a character and then C<ungetc>s it, so isn't useful in an interactive context.) Do not read from a terminal file (or call C<eof(FILEHANDLE)> on it) after end-of-file is reached. File types such as terminals may lose the end-of-file condition if you do. An L<C<eof>|/eof FILEHANDLE> without an argument uses the last file read. Using L<C<eof()>|/eof FILEHANDLE> with empty parentheses is different. It refers to the pseudo file formed from the files listed on the command line and accessed via the C<< <> >> operator. Since C<< <> >> isn't explicitly opened, as a normal filehandle is, an L<C<eof()>|/eof FILEHANDLE> before C<< <> >> has been used will cause L<C<@ARGV>|perlvar/@ARGV> to be examined to determine if input is available. Similarly, an L<C<eof()>|/eof FILEHANDLE> after C<< <> >> has returned end-of-file will assume you are processing another L<C<@ARGV>|perlvar/@ARGV> list, and if you haven't set L<C<@ARGV>|perlvar/@ARGV>, will read input from C<STDIN>; see L<perlop/"I/O Operators">. In a C<< while (<>) >> loop, L<C<eof>|/eof FILEHANDLE> or C<eof(ARGV)> can be used to detect the end of each file, whereas L<C<eof()>|/eof FILEHANDLE> will detect the end of the very last file only. Examples: # reset line numbering on each input file while (<>) { next if /^\s*#/; # skip comments print "$.\t$_"; } continue { close ARGV if eof; # Not eof()! } # insert dashes just before last line of last file while (<>) { if (eof()) { # check for end of last file print "--------------\n"; } print; last if eof(); # needed if we're reading from a terminal } Practical hint: you almost never need to use L<C<eof>|/eof FILEHANDLE> in Perl, because the input operators typically return L<C<undef>|/undef EXPR> when they run out of data or encounter an error. =item eval EXPR X<eval> X<try> X<catch> X<evaluate> X<parse> X<execute> X<error, handling> X<exception, handling> =item eval BLOCK =item eval =for Pod::Functions catch exceptions or compile and run code C<eval> in all its forms is used to execute a little Perl program, trapping any errors encountered so they don't crash the calling program. Plain C<eval> with no argument is just C<eval EXPR>, where the expression is understood to be contained in L<C<$_>|perlvar/$_>. Thus there are only two real C<eval> forms; the one with an EXPR is often called "string eval". In a string eval, the value of the expression (which is itself determined within scalar context) is first parsed, and if there were no errors, executed as a block within the lexical context of the current Perl program. This form is typically used to delay parsing and subsequent execution of the text of EXPR until run time. Note that the value is parsed every time the C<eval> executes. The other form is called "block eval". It is less general than string eval, but the code within the BLOCK is parsed only once (at the same time the code surrounding the C<eval> itself was parsed) and executed within the context of the current Perl program. This form is typically used to trap exceptions more efficiently than the first, while also providing the benefit of checking the code within BLOCK at compile time. BLOCK is parsed and compiled just once. Since errors are trapped, it often is used to check if a given feature is available. In both forms, the value returned is the value of the last expression evaluated inside the mini-program; a return statement may also be used, just as with subroutines. The expression providing the return value is evaluated in void, scalar, or list context, depending on the context of the C<eval> itself. See L<C<wantarray>|/wantarray> for more on how the evaluation context can be determined. If there is a syntax error or runtime error, or a L<C<die>|/die LIST> statement is executed, C<eval> returns L<C<undef>|/undef EXPR> in scalar context, or an empty list in list context, and L<C<$@>|perlvar/$@> is set to the error message. (Prior to 5.16, a bug caused L<C<undef>|/undef EXPR> to be returned in list context for syntax errors, but not for runtime errors.) If there was no error, L<C<$@>|perlvar/$@> is set to the empty string. A control flow operator like L<C<last>|/last LABEL> or L<C<goto>|/goto LABEL> can bypass the setting of L<C<$@>|perlvar/$@>. Beware that using C<eval> neither silences Perl from printing warnings to STDERR, nor does it stuff the text of warning messages into L<C<$@>|perlvar/$@>. To do either of those, you have to use the L<C<$SIG{__WARN__}>|perlvar/%SIG> facility, or turn off warnings inside the BLOCK or EXPR using S<C<no warnings 'all'>>. See L<C<warn>|/warn LIST>, L<perlvar>, and L<warnings>. Note that, because C<eval> traps otherwise-fatal errors, it is useful for determining whether a particular feature (such as L<C<socket>|/socket SOCKET,DOMAIN,TYPE,PROTOCOL> or L<C<symlink>|/symlink OLDFILE,NEWFILE>) is implemented. It is also Perl's exception-trapping mechanism, where the L<C<die>|/die LIST> operator is used to raise exceptions. Before Perl 5.14, the assignment to L<C<$@>|perlvar/$@> occurred before restoration of localized variables, which means that for your code to run on older versions, a temporary is required if you want to mask some, but not all errors: # alter $@ on nefarious repugnancy only { my $e; { local $@; # protect existing $@ eval { test_repugnancy() }; # $@ =~ /nefarious/ and die $@; # Perl 5.14 and higher only $@ =~ /nefarious/ and $e = $@; } die $e if defined $e } There are some different considerations for each form: =over 4 =item String eval Since the return value of EXPR is executed as a block within the lexical context of the current Perl program, any outer lexical variables are visible to it, and any package variable settings or subroutine and format definitions remain afterwards. =over 4 =item Under the L<C<"unicode_eval"> feature|feature/The 'unicode_eval' and 'evalbytes' features> If this feature is enabled (which is the default under a C<use 5.16> or higher declaration), EXPR is considered to be in the same encoding as the surrounding program. Thus if S<L<C<use utf8>|utf8>> is in effect, the string will be treated as being UTF-8 encoded. Otherwise, the string is considered to be a sequence of independent bytes. Bytes that correspond to ASCII-range code points will have their normal meanings for operators in the string. The treatment of the other bytes depends on if the L<C<'unicode_strings"> feature|feature/The 'unicode_strings' feature> is in effect. In a plain C<eval> without an EXPR argument, being in S<C<use utf8>> or not is irrelevant; the UTF-8ness of C<$_> itself determines the behavior. Any S<C<use utf8>> or S<C<no utf8>> declarations within the string have no effect, and source filters are forbidden. (C<unicode_strings>, however, can appear within the string.) See also the L<C<evalbytes>|/evalbytes EXPR> operator, which works properly with source filters. Variables defined outside the C<eval> and used inside it retain their original UTF-8ness. Everything inside the string follows the normal rules for a Perl program with the given state of S<C<use utf8>>. =item Outside the C<"unicode_eval"> feature In this case, the behavior is problematic and is not so easily described. Here are two bugs that cannot easily be fixed without breaking existing programs: =over 4 =item * It can lose track of whether something should be encoded as UTF-8 or not. =item * Source filters activated within C<eval> leak out into whichever file scope is currently being compiled. To give an example with the CPAN module L<Semi::Semicolons>: BEGIN { eval "use Semi::Semicolons; # not filtered" } # filtered here! L<C<evalbytes>|/evalbytes EXPR> fixes that to work the way one would expect: use feature "evalbytes"; BEGIN { evalbytes "use Semi::Semicolons; # filtered" } # not filtered =back =back Problems can arise if the string expands a scalar containing a floating point number. That scalar can expand to letters, such as C<"NaN"> or C<"Infinity">; or, within the scope of a L<C<use locale>|locale>, the decimal point character may be something other than a dot (such as a comma). None of these are likely to parse as you are likely expecting. You should be especially careful to remember what's being looked at when: eval $x; # CASE 1 eval "$x"; # CASE 2 eval '$x'; # CASE 3 eval { $x }; # CASE 4 eval "\$$x++"; # CASE 5 $$x++; # CASE 6 Cases 1 and 2 above behave identically: they run the code contained in the variable $x. (Although case 2 has misleading double quotes making the reader wonder what else might be happening (nothing is).) Cases 3 and 4 likewise behave in the same way: they run the code C<'$x'>, which does nothing but return the value of $x. (Case 4 is preferred for purely visual reasons, but it also has the advantage of compiling at compile-time instead of at run-time.) Case 5 is a place where normally you I<would> like to use double quotes, except that in this particular situation, you can just use symbolic references instead, as in case 6. An C<eval ''> executed within a subroutine defined in the C<DB> package doesn't see the usual surrounding lexical scope, but rather the scope of the first non-DB piece of code that called it. You don't normally need to worry about this unless you are writing a Perl debugger. The final semicolon, if any, may be omitted from the value of EXPR. =item Block eval If the code to be executed doesn't vary, you may use the eval-BLOCK form to trap run-time errors without incurring the penalty of recompiling each time. The error, if any, is still returned in L<C<$@>|perlvar/$@>. Examples: # make divide-by-zero nonfatal eval { $answer = $a / $b; }; warn $@ if $@; # same thing, but less efficient eval '$answer = $a / $b'; warn $@ if $@; # a compile-time error eval { $answer = }; # WRONG # a run-time error eval '$answer ='; # sets $@ If you want to trap errors when loading an XS module, some problems with the binary interface (such as Perl version skew) may be fatal even with C<eval> unless C<$ENV{PERL_DL_NONLAZY}> is set. See L<perlrun|perlrun/PERL_DL_NONLAZY>. Using the C<eval {}> form as an exception trap in libraries does have some issues. Due to the current arguably broken state of C<__DIE__> hooks, you may wish not to trigger any C<__DIE__> hooks that user code may have installed. You can use the C<local $SIG{__DIE__}> construct for this purpose, as this example shows: # a private exception trap for divide-by-zero eval { local $SIG{'__DIE__'}; $answer = $a / $b; }; warn $@ if $@; This is especially significant, given that C<__DIE__> hooks can call L<C<die>|/die LIST> again, which has the effect of changing their error messages: # __DIE__ hooks may modify error messages { local $SIG{'__DIE__'} = sub { (my $x = $_[0]) =~ s/foo/bar/g; die $x }; eval { die "foo lives here" }; print $@ if $@; # prints "bar lives here" } Because this promotes action at a distance, this counterintuitive behavior may be fixed in a future release. C<eval BLOCK> does I<not> count as a loop, so the loop control statements L<C<next>|/next LABEL>, L<C<last>|/last LABEL>, or L<C<redo>|/redo LABEL> cannot be used to leave or restart the block. The final semicolon, if any, may be omitted from within the BLOCK. =back =item evalbytes EXPR X<evalbytes> =item evalbytes =for Pod::Functions +evalbytes similar to string eval, but intend to parse a bytestream This function is similar to a L<string eval|/eval EXPR>, except it always parses its argument (or L<C<$_>|perlvar/$_> if EXPR is omitted) as a string of independent bytes. If called when S<C<use utf8>> is in effect, the string will be assumed to be encoded in UTF-8, and C<evalbytes> will make a temporary copy to work from, downgraded to non-UTF-8. If this is not possible (because one or more characters in it require UTF-8), the C<evalbytes> will fail with the error stored in C<$@>. Bytes that correspond to ASCII-range code points will have their normal meanings for operators in the string. The treatment of the other bytes depends on if the L<C<'unicode_strings"> feature|feature/The 'unicode_strings' feature> is in effect. Of course, variables that are UTF-8 and are referred to in the string retain that: my $a = "\x{100}"; evalbytes 'print ord $a, "\n"'; prints 256 and C<$@> is empty. Source filters activated within the evaluated code apply to the code itself. L<C<evalbytes>|/evalbytes EXPR> is available starting in Perl v5.16. To access it, you must say C<CORE::evalbytes>, but you can omit the C<CORE::> if the L<C<"evalbytes"> feature|feature/The 'unicode_eval' and 'evalbytes' features> is enabled. This is enabled automatically with a C<use v5.16> (or higher) declaration in the current scope. =item exec LIST X<exec> X<execute> =item exec PROGRAM LIST =for Pod::Functions abandon this program to run another The L<C<exec>|/exec LIST> function executes a system command I<and never returns>; use L<C<system>|/system LIST> instead of L<C<exec>|/exec LIST> if you want it to return. It fails and returns false only if the command does not exist I<and> it is executed directly instead of via your system's command shell (see below). Since it's a common mistake to use L<C<exec>|/exec LIST> instead of L<C<system>|/system LIST>, Perl warns you if L<C<exec>|/exec LIST> is called in void context and if there is a following statement that isn't L<C<die>|/die LIST>, L<C<warn>|/warn LIST>, or L<C<exit>|/exit EXPR> (if L<warnings> are enabled--but you always do that, right?). If you I<really> want to follow an L<C<exec>|/exec LIST> with some other statement, you can use one of these styles to avoid the warning: exec ('foo') or print STDERR "couldn't exec foo: $!"; { exec ('foo') }; print STDERR "couldn't exec foo: $!"; If there is more than one argument in LIST, this calls L<execvp(3)> with the arguments in LIST. If there is only one element in LIST, the argument is checked for shell metacharacters, and if there are any, the entire argument is passed to the system's command shell for parsing (this is C</bin/sh -c> on Unix platforms, but varies on other platforms). If there are no shell metacharacters in the argument, it is split into words and passed directly to C<execvp>, which is more efficient. Examples: exec '/bin/echo', 'Your arguments are: ', @ARGV; exec "sort $outfile | uniq"; If you don't really want to execute the first argument, but want to lie to the program you are executing about its own name, you can specify the program you actually want to run as an "indirect object" (without a comma) in front of the LIST, as in C<exec PROGRAM LIST>. (This always forces interpretation of the LIST as a multivalued list, even if there is only a single scalar in the list.) Example: my $shell = '/bin/csh'; exec $shell '-sh'; # pretend it's a login shell or, more directly, exec {'/bin/csh'} '-sh'; # pretend it's a login shell When the arguments get executed via the system shell, results are subject to its quirks and capabilities. See L<perlop/"`STRING`"> for details. Using an indirect object with L<C<exec>|/exec LIST> or L<C<system>|/system LIST> is also more secure. This usage (which also works fine with L<C<system>|/system LIST>) forces interpretation of the arguments as a multivalued list, even if the list had just one argument. That way you're safe from the shell expanding wildcards or splitting up words with whitespace in them. my @args = ( "echo surprise" ); exec @args; # subject to shell escapes # if @args == 1 exec { $args[0] } @args; # safe even with one-arg list The first version, the one without the indirect object, ran the I<echo> program, passing it C<"surprise"> an argument. The second version didn't; it tried to run a program named I<"echo surprise">, didn't find it, and set L<C<$?>|perlvar/$?> to a non-zero value indicating failure. On Windows, only the C<exec PROGRAM LIST> indirect object syntax will reliably avoid using the shell; C<exec LIST>, even with more than one element, will fall back to the shell if the first spawn fails. Perl attempts to flush all files opened for output before the exec, but this may not be supported on some platforms (see L<perlport>). To be safe, you may need to set L<C<$E<verbar>>|perlvar/$E<verbar>> (C<$AUTOFLUSH> in L<English>) or call the C<autoflush> method of L<C<IO::Handle>|IO::Handle/METHODS> on any open handles to avoid lost output. Note that L<C<exec>|/exec LIST> will not call your C<END> blocks, nor will it invoke C<DESTROY> methods on your objects. Portability issues: L<perlport/exec>. =item exists EXPR X<exists> X<autovivification> =for Pod::Functions test whether a hash key is present Given an expression that specifies an element of a hash, returns true if the specified element in the hash has ever been initialized, even if the corresponding value is undefined. print "Exists\n" if exists $hash{$key}; print "Defined\n" if defined $hash{$key}; print "True\n" if $hash{$key}; exists may also be called on array elements, but its behavior is much less obvious and is strongly tied to the use of L<C<delete>|/delete EXPR> on arrays. B<WARNING:> Calling L<C<exists>|/exists EXPR> on array values is strongly discouraged. The notion of deleting or checking the existence of Perl array elements is not conceptually coherent, and can lead to surprising behavior. print "Exists\n" if exists $array[$index]; print "Defined\n" if defined $array[$index]; print "True\n" if $array[$index]; A hash or array element can be true only if it's defined and defined only if it exists, but the reverse doesn't necessarily hold true. Given an expression that specifies the name of a subroutine, returns true if the specified subroutine has ever been declared, even if it is undefined. Mentioning a subroutine name for exists or defined does not count as declaring it. Note that a subroutine that does not exist may still be callable: its package may have an C<AUTOLOAD> method that makes it spring into existence the first time that it is called; see L<perlsub>. print "Exists\n" if exists &subroutine; print "Defined\n" if defined &subroutine; Note that the EXPR can be arbitrarily complicated as long as the final operation is a hash or array key lookup or subroutine name: if (exists $ref->{A}->{B}->{$key}) { } if (exists $hash{A}{B}{$key}) { } if (exists $ref->{A}->{B}->[$ix]) { } if (exists $hash{A}{B}[$ix]) { } if (exists &{$ref->{A}{B}{$key}}) { } Although the most deeply nested array or hash element will not spring into existence just because its existence was tested, any intervening ones will. Thus C<< $ref->{"A"} >> and C<< $ref->{"A"}->{"B"} >> will spring into existence due to the existence test for the C<$key> element above. This happens anywhere the arrow operator is used, including even here: undef $ref; if (exists $ref->{"Some key"}) { } print $ref; # prints HASH(0x80d3d5c) Use of a subroutine call, rather than a subroutine name, as an argument to L<C<exists>|/exists EXPR> is an error. exists ⊂ # OK exists &sub(); # Error =item exit EXPR X<exit> X<terminate> X<abort> =item exit =for Pod::Functions terminate this program Evaluates EXPR and exits immediately with that value. Example: my $ans = <STDIN>; exit 0 if $ans =~ /^[Xx]/; See also L<C<die>|/die LIST>. If EXPR is omitted, exits with C<0> status. The only universally recognized values for EXPR are C<0> for success and C<1> for error; other values are subject to interpretation depending on the environment in which the Perl program is running. For example, exiting 69 (EX_UNAVAILABLE) from a I<sendmail> incoming-mail filter will cause the mailer to return the item undelivered, but that's not true everywhere. Don't use L<C<exit>|/exit EXPR> to abort a subroutine if there's any chance that someone might want to trap whatever error happened. Use L<C<die>|/die LIST> instead, which can be trapped by an L<C<eval>|/eval EXPR>. The L<C<exit>|/exit EXPR> function does not always exit immediately. It calls any defined C<END> routines first, but these C<END> routines may not themselves abort the exit. Likewise any object destructors that need to be called are called before the real exit. C<END> routines and destructors can change the exit status by modifying L<C<$?>|perlvar/$?>. If this is a problem, you can call L<C<POSIX::_exit($status)>|POSIX/C<_exit>> to avoid C<END> and destructor processing. See L<perlmod> for details. Portability issues: L<perlport/exit>. =item exp EXPR X<exp> X<exponential> X<antilog> X<antilogarithm> X<e> =item exp =for Pod::Functions raise I<e> to a power Returns I<e> (the natural logarithm base) to the power of EXPR. If EXPR is omitted, gives C<exp($_)>. =item fc EXPR X<fc> X<foldcase> X<casefold> X<fold-case> X<case-fold> =item fc =for Pod::Functions +fc return casefolded version of a string Returns the casefolded version of EXPR. This is the internal function implementing the C<\F> escape in double-quoted strings. Casefolding is the process of mapping strings to a form where case differences are erased; comparing two strings in their casefolded form is effectively a way of asking if two strings are equal, regardless of case. Roughly, if you ever found yourself writing this lc($this) eq lc($that) # Wrong! # or uc($this) eq uc($that) # Also wrong! # or $this =~ /^\Q$that\E\z/i # Right! Now you can write fc($this) eq fc($that) And get the correct results. Perl only implements the full form of casefolding, but you can access the simple folds using L<Unicode::UCD/B<casefold()>> and L<Unicode::UCD/B<prop_invmap()>>. For further information on casefolding, refer to the Unicode Standard, specifically sections 3.13 C<Default Case Operations>, 4.2 C<Case-Normative>, and 5.18 C<Case Mappings>, available at L<https://www.unicode.org/versions/latest/>, as well as the Case Charts available at L<https://www.unicode.org/charts/case/>. If EXPR is omitted, uses L<C<$_>|perlvar/$_>. This function behaves the same way under various pragmas, such as within L<S<C<"use feature 'unicode_strings">>|feature/The 'unicode_strings' feature>, as L<C<lc>|/lc EXPR> does, with the single exception of L<C<fc>|/fc EXPR> of I<LATIN CAPITAL LETTER SHARP S> (U+1E9E) within the scope of L<S<C<use locale>>|locale>. The foldcase of this character would normally be C<"ss">, but as explained in the L<C<lc>|/lc EXPR> section, case changes that cross the 255/256 boundary are problematic under locales, and are hence prohibited. Therefore, this function under locale returns instead the string C<"\x{17F}\x{17F}">, which is the I<LATIN SMALL LETTER LONG S>. Since that character itself folds to C<"s">, the string of two of them together should be equivalent to a single U+1E9E when foldcased. While the Unicode Standard defines two additional forms of casefolding, one for Turkic languages and one that never maps one character into multiple characters, these are not provided by the Perl core. However, the CPAN module L<C<Unicode::Casing>|Unicode::Casing> may be used to provide an implementation. L<C<fc>|/fc EXPR> is available only if the L<C<"fc"> feature|feature/The 'fc' feature> is enabled or if it is prefixed with C<CORE::>. The L<C<"fc"> feature|feature/The 'fc' feature> is enabled automatically with a C<use v5.16> (or higher) declaration in the current scope. =item fcntl FILEHANDLE,FUNCTION,SCALAR X<fcntl> =for Pod::Functions file control system call Implements the L<fcntl(2)> function. You'll probably have to say use Fcntl; first to get the correct constant definitions. Argument processing and value returned work just like L<C<ioctl>|/ioctl FILEHANDLE,FUNCTION,SCALAR> below. For example: use Fcntl; my $flags = fcntl($filehandle, F_GETFL, 0) or die "Can't fcntl F_GETFL: $!"; You don't have to check for L<C<defined>|/defined EXPR> on the return from L<C<fcntl>|/fcntl FILEHANDLE,FUNCTION,SCALAR>. Like L<C<ioctl>|/ioctl FILEHANDLE,FUNCTION,SCALAR>, it maps a C<0> return from the system call into C<"0 but true"> in Perl. This string is true in boolean context and C<0> in numeric context. It is also exempt from the normal L<C<Argument "..." isn't numeric>|perldiag/Argument "%s" isn't numeric%s> L<warnings> on improper numeric conversions. Note that L<C<fcntl>|/fcntl FILEHANDLE,FUNCTION,SCALAR> raises an exception if used on a machine that doesn't implement L<fcntl(2)>. See the L<Fcntl> module or your L<fcntl(2)> manpage to learn what functions are available on your system. Here's an example of setting a filehandle named C<$REMOTE> to be non-blocking at the system level. You'll have to negotiate L<C<$E<verbar>>|perlvar/$E<verbar>> on your own, though. use Fcntl qw(F_GETFL F_SETFL O_NONBLOCK); my $flags = fcntl($REMOTE, F_GETFL, 0) or die "Can't get flags for the socket: $!\n"; fcntl($REMOTE, F_SETFL, $flags | O_NONBLOCK) or die "Can't set flags for the socket: $!\n"; Portability issues: L<perlport/fcntl>. =item __FILE__ X<__FILE__> =for Pod::Functions the name of the current source file A special token that returns the name of the file in which it occurs. It can be altered by the mechanism described at L<perlsyn/"Plain Old Comments (Not!)">. =item fileno FILEHANDLE X<fileno> =item fileno DIRHANDLE =for Pod::Functions return file descriptor from filehandle Returns the file descriptor for a filehandle or directory handle, or undefined if the filehandle is not open. If there is no real file descriptor at the OS level, as can happen with filehandles connected to memory objects via L<C<open>|/open FILEHANDLE,MODE,EXPR> with a reference for the third argument, -1 is returned. This is mainly useful for constructing bitmaps for L<C<select>|/select RBITS,WBITS,EBITS,TIMEOUT> and low-level POSIX tty-handling operations. If FILEHANDLE is an expression, the value is taken as an indirect filehandle, generally its name. You can use this to find out whether two handles refer to the same underlying descriptor: if (fileno($this) != -1 && fileno($this) == fileno($that)) { print "\$this and \$that are dups\n"; } elsif (fileno($this) != -1 && fileno($that) != -1) { print "\$this and \$that have different " . "underlying file descriptors\n"; } else { print "At least one of \$this and \$that does " . "not have a real file descriptor\n"; } The behavior of L<C<fileno>|/fileno FILEHANDLE> on a directory handle depends on the operating system. On a system with L<dirfd(3)> or similar, L<C<fileno>|/fileno FILEHANDLE> on a directory handle returns the underlying file descriptor associated with the handle; on systems with no such support, it returns the undefined value, and sets L<C<$!>|perlvar/$!> (errno). =item flock FILEHANDLE,OPERATION X<flock> X<lock> X<locking> =for Pod::Functions lock an entire file with an advisory lock Calls L<flock(2)>, or an emulation of it, on FILEHANDLE. Returns true for success, false on failure. Produces a fatal error if used on a machine that doesn't implement L<flock(2)>, L<fcntl(2)> locking, or L<lockf(3)>. L<C<flock>|/flock FILEHANDLE,OPERATION> is Perl's portable file-locking interface, although it locks entire files only, not records. Two potentially non-obvious but traditional L<C<flock>|/flock FILEHANDLE,OPERATION> semantics are that it waits indefinitely until the lock is granted, and that its locks are B<merely advisory>. Such discretionary locks are more flexible, but offer fewer guarantees. This means that programs that do not also use L<C<flock>|/flock FILEHANDLE,OPERATION> may modify files locked with L<C<flock>|/flock FILEHANDLE,OPERATION>. See L<perlport>, your port's specific documentation, and your system-specific local manpages for details. It's best to assume traditional behavior if you're writing portable programs. (But if you're not, you should as always feel perfectly free to write for your own system's idiosyncrasies (sometimes called "features"). Slavish adherence to portability concerns shouldn't get in the way of your getting your job done.) OPERATION is one of LOCK_SH, LOCK_EX, or LOCK_UN, possibly combined with LOCK_NB. These constants are traditionally valued 1, 2, 8 and 4, but you can use the symbolic names if you import them from the L<Fcntl> module, either individually, or as a group using the C<:flock> tag. LOCK_SH requests a shared lock, LOCK_EX requests an exclusive lock, and LOCK_UN releases a previously requested lock. If LOCK_NB is bitwise-or'ed with LOCK_SH or LOCK_EX, then L<C<flock>|/flock FILEHANDLE,OPERATION> returns immediately rather than blocking waiting for the lock; check the return status to see if you got it. To avoid the possibility of miscoordination, Perl now flushes FILEHANDLE before locking or unlocking it. Note that the emulation built with L<lockf(3)> doesn't provide shared locks, and it requires that FILEHANDLE be open with write intent. These are the semantics that L<lockf(3)> implements. Most if not all systems implement L<lockf(3)> in terms of L<fcntl(2)> locking, though, so the differing semantics shouldn't bite too many people. Note that the L<fcntl(2)> emulation of L<flock(3)> requires that FILEHANDLE be open with read intent to use LOCK_SH and requires that it be open with write intent to use LOCK_EX. Note also that some versions of L<C<flock>|/flock FILEHANDLE,OPERATION> cannot lock things over the network; you would need to use the more system-specific L<C<fcntl>|/fcntl FILEHANDLE,FUNCTION,SCALAR> for that. If you like you can force Perl to ignore your system's L<flock(2)> function, and so provide its own L<fcntl(2)>-based emulation, by passing the switch C<-Ud_flock> to the F<Configure> program when you configure and build a new Perl. Here's a mailbox appender for BSD systems. # import LOCK_* and SEEK_END constants use Fcntl qw(:flock SEEK_END); sub lock { my ($fh) = @_; flock($fh, LOCK_EX) or die "Cannot lock mailbox - $!\n"; # and, in case we're running on a very old UNIX # variant without the modern O_APPEND semantics... seek($fh, 0, SEEK_END) or die "Cannot seek - $!\n"; } sub unlock { my ($fh) = @_; flock($fh, LOCK_UN) or die "Cannot unlock mailbox - $!\n"; } open(my $mbox, ">>", "/usr/spool/mail/$ENV{'USER'}") or die "Can't open mailbox: $!"; lock($mbox); print $mbox $msg,"\n\n"; unlock($mbox); On systems that support a real L<flock(2)>, locks are inherited across L<C<fork>|/fork> calls, whereas those that must resort to the more capricious L<fcntl(2)> function lose their locks, making it seriously harder to write servers. See also L<DB_File> for other L<C<flock>|/flock FILEHANDLE,OPERATION> examples. Portability issues: L<perlport/flock>. =item fork X<fork> X<child> X<parent> =for Pod::Functions create a new process just like this one Does a L<fork(2)> system call to create a new process running the same program at the same point. It returns the child pid to the parent process, C<0> to the child process, or L<C<undef>|/undef EXPR> if the fork is unsuccessful. File descriptors (and sometimes locks on those descriptors) are shared, while everything else is copied. On most systems supporting L<fork(2)>, great care has gone into making it extremely efficient (for example, using copy-on-write technology on data pages), making it the dominant paradigm for multitasking over the last few decades. Perl attempts to flush all files opened for output before forking the child process, but this may not be supported on some platforms (see L<perlport>). To be safe, you may need to set L<C<$E<verbar>>|perlvar/$E<verbar>> (C<$AUTOFLUSH> in L<English>) or call the C<autoflush> method of L<C<IO::Handle>|IO::Handle/METHODS> on any open handles to avoid duplicate output. If you L<C<fork>|/fork> without ever waiting on your children, you will accumulate zombies. On some systems, you can avoid this by setting L<C<$SIG{CHLD}>|perlvar/%SIG> to C<"IGNORE">. See also L<perlipc> for more examples of forking and reaping moribund children. Note that if your forked child inherits system file descriptors like STDIN and STDOUT that are actually connected by a pipe or socket, even if you exit, then the remote server (such as, say, a CGI script or a backgrounded job launched from a remote shell) won't think you're done. You should reopen those to F</dev/null> if it's any issue. On some platforms such as Windows, where the L<fork(2)> system call is not available, Perl can be built to emulate L<C<fork>|/fork> in the Perl interpreter. The emulation is designed, at the level of the Perl program, to be as compatible as possible with the "Unix" L<fork(2)>. However it has limitations that have to be considered in code intended to be portable. See L<perlfork> for more details. Portability issues: L<perlport/fork>. =item format X<format> =for Pod::Functions declare a picture format with use by the write() function Declare a picture format for use by the L<C<write>|/write FILEHANDLE> function. For example: format Something = Test: @<<<<<<<< @||||| @>>>>> $str, $%, '$' . int($num) . $str = "widget"; $num = $cost/$quantity; $~ = 'Something'; write; See L<perlform> for many details and examples. =item formline PICTURE,LIST X<formline> =for Pod::Functions internal function used for formats This is an internal function used by L<C<format>|/format>s, though you may call it, too. It formats (see L<perlform>) a list of values according to the contents of PICTURE, placing the output into the format output accumulator, L<C<$^A>|perlvar/$^A> (or C<$ACCUMULATOR> in L<English>). Eventually, when a L<C<write>|/write FILEHANDLE> is done, the contents of L<C<$^A>|perlvar/$^A> are written to some filehandle. You could also read L<C<$^A>|perlvar/$^A> and then set L<C<$^A>|perlvar/$^A> back to C<"">. Note that a format typically does one L<C<formline>|/formline PICTURE,LIST> per line of form, but the L<C<formline>|/formline PICTURE,LIST> function itself doesn't care how many newlines are embedded in the PICTURE. This means that the C<~> and C<~~> tokens treat the entire PICTURE as a single line. You may therefore need to use multiple formlines to implement a single record format, just like the L<C<format>|/format> compiler. Be careful if you put double quotes around the picture, because an C<@> character may be taken to mean the beginning of an array name. L<C<formline>|/formline PICTURE,LIST> always returns true. See L<perlform> for other examples. If you are trying to use this instead of L<C<write>|/write FILEHANDLE> to capture the output, you may find it easier to open a filehandle to a scalar (C<< open my $fh, ">", \$output >>) and write to that instead. =item getc FILEHANDLE X<getc> X<getchar> X<character> X<file, read> =item getc =for Pod::Functions get the next character from the filehandle Returns the next character from the input file attached to FILEHANDLE, or the undefined value at end of file or if there was an error (in the latter case L<C<$!>|perlvar/$!> is set). If FILEHANDLE is omitted, reads from STDIN. This is not particularly efficient. However, it cannot be used by itself to fetch single characters without waiting for the user to hit enter. For that, try something more like: if ($BSD_STYLE) { system "stty cbreak </dev/tty >/dev/tty 2>&1"; } else { system "stty", '-icanon', 'eol', "\001"; } my $key = getc(STDIN); if ($BSD_STYLE) { system "stty -cbreak </dev/tty >/dev/tty 2>&1"; } else { system 'stty', 'icanon', 'eol', '^@'; # ASCII NUL } print "\n"; Determination of whether C<$BSD_STYLE> should be set is left as an exercise to the reader. The L<C<POSIX::getattr>|POSIX/C<getattr>> function can do this more portably on systems purporting POSIX compliance. See also the L<C<Term::ReadKey>|Term::ReadKey> module on CPAN. =item getlogin X<getlogin> X<login> =for Pod::Functions return who logged in at this tty This implements the C library function of the same name, which on most systems returns the current login from F</etc/utmp>, if any. If it returns the empty string, use L<C<getpwuid>|/getpwuid UID>. my $login = getlogin || getpwuid($<) || "Kilroy"; Do not consider L<C<getlogin>|/getlogin> for authentication: it is not as secure as L<C<getpwuid>|/getpwuid UID>. Portability issues: L<perlport/getlogin>. =item getpeername SOCKET X<getpeername> X<peer> =for Pod::Functions find the other end of a socket connection Returns the packed sockaddr address of the other end of the SOCKET connection. use Socket; my $hersockaddr = getpeername($sock); my ($port, $iaddr) = sockaddr_in($hersockaddr); my $herhostname = gethostbyaddr($iaddr, AF_INET); my $herstraddr = inet_ntoa($iaddr); =item getpgrp PID X<getpgrp> X<group> =for Pod::Functions get process group Returns the current process group for the specified PID. Use a PID of C<0> to get the current process group for the current process. Will raise an exception if used on a machine that doesn't implement L<getpgrp(2)>. If PID is omitted, returns the process group of the current process. Note that the POSIX version of L<C<getpgrp>|/getpgrp PID> does not accept a PID argument, so only C<PID==0> is truly portable. Portability issues: L<perlport/getpgrp>. =item getppid X<getppid> X<parent> X<pid> =for Pod::Functions get parent process ID Returns the process id of the parent process. Note for Linux users: Between v5.8.1 and v5.16.0 Perl would work around non-POSIX thread semantics the minority of Linux systems (and Debian GNU/kFreeBSD systems) that used LinuxThreads, this emulation has since been removed. See the documentation for L<$$|perlvar/$$> for details. Portability issues: L<perlport/getppid>. =item getpriority WHICH,WHO X<getpriority> X<priority> X<nice> =for Pod::Functions get current nice value Returns the current priority for a process, a process group, or a user. (See L<getpriority(2)>.) Will raise a fatal exception if used on a machine that doesn't implement L<getpriority(2)>. C<WHICH> can be any of C<PRIO_PROCESS>, C<PRIO_PGRP> or C<PRIO_USER> imported from L<POSIX/RESOURCE CONSTANTS>. Portability issues: L<perlport/getpriority>. =item getpwnam NAME X<getpwnam> X<getgrnam> X<gethostbyname> X<getnetbyname> X<getprotobyname> X<getpwuid> X<getgrgid> X<getservbyname> X<gethostbyaddr> X<getnetbyaddr> X<getprotobynumber> X<getservbyport> X<getpwent> X<getgrent> X<gethostent> X<getnetent> X<getprotoent> X<getservent> X<setpwent> X<setgrent> X<sethostent> X<setnetent> X<setprotoent> X<setservent> X<endpwent> X<endgrent> X<endhostent> X<endnetent> X<endprotoent> X<endservent> =for Pod::Functions get passwd record given user login name =item getgrnam NAME =for Pod::Functions get group record given group name =item gethostbyname NAME =for Pod::Functions get host record given name =item getnetbyname NAME =for Pod::Functions get networks record given name =item getprotobyname NAME =for Pod::Functions get protocol record given name =item getpwuid UID =for Pod::Functions get passwd record given user ID =item getgrgid GID =for Pod::Functions get group record given group user ID =item getservbyname NAME,PROTO =for Pod::Functions get services record given its name =item gethostbyaddr ADDR,ADDRTYPE =for Pod::Functions get host record given its address =item getnetbyaddr ADDR,ADDRTYPE =for Pod::Functions get network record given its address =item getprotobynumber NUMBER =for Pod::Functions get protocol record numeric protocol =item getservbyport PORT,PROTO =for Pod::Functions get services record given numeric port =item getpwent =for Pod::Functions get next passwd record =item getgrent =for Pod::Functions get next group record =item gethostent =for Pod::Functions get next hosts record =item getnetent =for Pod::Functions get next networks record =item getprotoent =for Pod::Functions get next protocols record =item getservent =for Pod::Functions get next services record =item setpwent =for Pod::Functions prepare passwd file for use =item setgrent =for Pod::Functions prepare group file for use =item sethostent STAYOPEN =for Pod::Functions prepare hosts file for use =item setnetent STAYOPEN =for Pod::Functions prepare networks file for use =item setprotoent STAYOPEN =for Pod::Functions prepare protocols file for use =item setservent STAYOPEN =for Pod::Functions prepare services file for use =item endpwent =for Pod::Functions be done using passwd file =item endgrent =for Pod::Functions be done using group file =item endhostent =for Pod::Functions be done using hosts file =item endnetent =for Pod::Functions be done using networks file =item endprotoent =for Pod::Functions be done using protocols file =item endservent =for Pod::Functions be done using services file These routines are the same as their counterparts in the system C library. In list context, the return values from the various get routines are as follows: # 0 1 2 3 4 my ( $name, $passwd, $gid, $members ) = getgr* my ( $name, $aliases, $addrtype, $net ) = getnet* my ( $name, $aliases, $port, $proto ) = getserv* my ( $name, $aliases, $proto ) = getproto* my ( $name, $aliases, $addrtype, $length, @addrs ) = gethost* my ( $name, $passwd, $uid, $gid, $quota, $comment, $gcos, $dir, $shell, $expire ) = getpw* # 5 6 7 8 9 (If the entry doesn't exist, the return value is a single meaningless true value.) The exact meaning of the $gcos field varies but it usually contains the real name of the user (as opposed to the login name) and other information pertaining to the user. Beware, however, that in many system users are able to change this information and therefore it cannot be trusted and therefore the $gcos is tainted (see L<perlsec>). The $passwd and $shell, user's encrypted password and login shell, are also tainted, for the same reason. In scalar context, you get the name, unless the function was a lookup by name, in which case you get the other thing, whatever it is. (If the entry doesn't exist you get the undefined value.) For example: my $uid = getpwnam($name); my $name = getpwuid($num); my $name = getpwent(); my $gid = getgrnam($name); my $name = getgrgid($num); my $name = getgrent(); # etc. In I<getpw*()> the fields $quota, $comment, and $expire are special in that they are unsupported on many systems. If the $quota is unsupported, it is an empty scalar. If it is supported, it usually encodes the disk quota. If the $comment field is unsupported, it is an empty scalar. If it is supported it usually encodes some administrative comment about the user. In some systems the $quota field may be $change or $age, fields that have to do with password aging. In some systems the $comment field may be $class. The $expire field, if present, encodes the expiration period of the account or the password. For the availability and the exact meaning of these fields in your system, please consult L<getpwnam(3)> and your system's F<pwd.h> file. You can also find out from within Perl what your $quota and $comment fields mean and whether you have the $expire field by using the L<C<Config>|Config> module and the values C<d_pwquota>, C<d_pwage>, C<d_pwchange>, C<d_pwcomment>, and C<d_pwexpire>. Shadow password files are supported only if your vendor has implemented them in the intuitive fashion that calling the regular C library routines gets the shadow versions if you're running under privilege or if there exists the L<shadow(3)> functions as found in System V (this includes Solaris and Linux). Those systems that implement a proprietary shadow password facility are unlikely to be supported. The $members value returned by I<getgr*()> is a space-separated list of the login names of the members of the group. For the I<gethost*()> functions, if the C<h_errno> variable is supported in C, it will be returned to you via L<C<$?>|perlvar/$?> if the function call fails. The C<@addrs> value returned by a successful call is a list of raw addresses returned by the corresponding library call. In the Internet domain, each address is four bytes long; you can unpack it by saying something like: my ($w,$x,$y,$z) = unpack('W4',$addr[0]); The Socket library makes this slightly easier: use Socket; my $iaddr = inet_aton("127.1"); # or whatever address my $name = gethostbyaddr($iaddr, AF_INET); # or going the other way my $straddr = inet_ntoa($iaddr); In the opposite way, to resolve a hostname to the IP address you can write this: use Socket; my $packed_ip = gethostbyname("www.perl.org"); my $ip_address; if (defined $packed_ip) { $ip_address = inet_ntoa($packed_ip); } Make sure L<C<gethostbyname>|/gethostbyname NAME> is called in SCALAR context and that its return value is checked for definedness. The L<C<getprotobynumber>|/getprotobynumber NUMBER> function, even though it only takes one argument, has the precedence of a list operator, so beware: getprotobynumber $number eq 'icmp' # WRONG getprotobynumber($number eq 'icmp') # actually means this getprotobynumber($number) eq 'icmp' # better this way If you get tired of remembering which element of the return list contains which return value, by-name interfaces are provided in standard modules: L<C<File::stat>|File::stat>, L<C<Net::hostent>|Net::hostent>, L<C<Net::netent>|Net::netent>, L<C<Net::protoent>|Net::protoent>, L<C<Net::servent>|Net::servent>, L<C<Time::gmtime>|Time::gmtime>, L<C<Time::localtime>|Time::localtime>, and L<C<User::grent>|User::grent>. These override the normal built-ins, supplying versions that return objects with the appropriate names for each field. For example: use File::stat; use User::pwent; my $is_his = (stat($filename)->uid == pwent($whoever)->uid); Even though it looks as though they're the same method calls (uid), they aren't, because a C<File::stat> object is different from a C<User::pwent> object. Many of these functions are not safe in a multi-threaded environment where more than one thread can be using them. In particular, functions like C<getpwent()> iterate per-process and not per-thread, so if two threads are simultaneously iterating, neither will get all the records. Some systems have thread-safe versions of some of the functions, such as C<getpwnam_r()> instead of C<getpwnam()>. There, Perl automatically and invisibly substitutes the thread-safe version, without notice. This means that code that safely runs on some systems can fail on others that lack the thread-safe versions. Portability issues: L<perlport/getpwnam> to L<perlport/endservent>. =item getsockname SOCKET X<getsockname> =for Pod::Functions retrieve the sockaddr for a given socket Returns the packed sockaddr address of this end of the SOCKET connection, in case you don't know the address because you have several different IPs that the connection might have come in on. use Socket; my $mysockaddr = getsockname($sock); my ($port, $myaddr) = sockaddr_in($mysockaddr); printf "Connect to %s [%s]\n", scalar gethostbyaddr($myaddr, AF_INET), inet_ntoa($myaddr); =item getsockopt SOCKET,LEVEL,OPTNAME X<getsockopt> =for Pod::Functions get socket options on a given socket Queries the option named OPTNAME associated with SOCKET at a given LEVEL. Options may exist at multiple protocol levels depending on the socket type, but at least the uppermost socket level SOL_SOCKET (defined in the L<C<Socket>|Socket> module) will exist. To query options at another level the protocol number of the appropriate protocol controlling the option should be supplied. For example, to indicate that an option is to be interpreted by the TCP protocol, LEVEL should be set to the protocol number of TCP, which you can get using L<C<getprotobyname>|/getprotobyname NAME>. The function returns a packed string representing the requested socket option, or L<C<undef>|/undef EXPR> on error, with the reason for the error placed in L<C<$!>|perlvar/$!>. Just what is in the packed string depends on LEVEL and OPTNAME; consult L<getsockopt(2)> for details. A common case is that the option is an integer, in which case the result is a packed integer, which you can decode using L<C<unpack>|/unpack TEMPLATE,EXPR> with the C<i> (or C<I>) format. Here's an example to test whether Nagle's algorithm is enabled on a socket: use Socket qw(:all); defined(my $tcp = getprotobyname("tcp")) or die "Could not determine the protocol number for tcp"; # my $tcp = IPPROTO_TCP; # Alternative my $packed = getsockopt($socket, $tcp, TCP_NODELAY) or die "getsockopt TCP_NODELAY: $!"; my $nodelay = unpack("I", $packed); print "Nagle's algorithm is turned ", $nodelay ? "off\n" : "on\n"; Portability issues: L<perlport/getsockopt>. =item glob EXPR X<glob> X<wildcard> X<filename, expansion> X<expand> =item glob =for Pod::Functions expand filenames using wildcards In list context, returns a (possibly empty) list of filename expansions on the value of EXPR such as the standard Unix shell F</bin/csh> would do. In scalar context, glob iterates through such filename expansions, returning undef when the list is exhausted. This is the internal function implementing the C<< <*.c> >> operator, but you can use it directly. If EXPR is omitted, L<C<$_>|perlvar/$_> is used. The C<< <*.c> >> operator is discussed in more detail in L<perlop/"I/O Operators">. Note that L<C<glob>|/glob EXPR> splits its arguments on whitespace and treats each segment as separate pattern. As such, C<glob("*.c *.h")> matches all files with a F<.c> or F<.h> extension. The expression C<glob(".* *")> matches all files in the current working directory. If you want to glob filenames that might contain whitespace, you'll have to use extra quotes around the spacey filename to protect it. For example, to glob filenames that have an C<e> followed by a space followed by an C<f>, use one of: my @spacies = <"*e f*">; my @spacies = glob '"*e f*"'; my @spacies = glob q("*e f*"); If you had to get a variable through, you could do this: my @spacies = glob "'*${var}e f*'"; my @spacies = glob qq("*${var}e f*"); If non-empty braces are the only wildcard characters used in the L<C<glob>|/glob EXPR>, no filenames are matched, but potentially many strings are returned. For example, this produces nine strings, one for each pairing of fruits and colors: my @many = glob "{apple,tomato,cherry}={green,yellow,red}"; This operator is implemented using the standard C<File::Glob> extension. See L<File::Glob> for details, including L<C<bsd_glob>|File::Glob/C<bsd_glob>>, which does not treat whitespace as a pattern separator. If a C<glob> expression is used as the condition of a C<while> or C<for> loop, then it will be implicitly assigned to C<$_>. If either a C<glob> expression or an explicit assignment of a C<glob> expression to a scalar is used as a C<while>/C<for> condition, then the condition actually tests for definedness of the expression's value, not for its regular truth value. Portability issues: L<perlport/glob>. =item gmtime EXPR X<gmtime> X<UTC> X<Greenwich> =item gmtime =for Pod::Functions convert UNIX time into record or string using Greenwich time Works just like L<C<localtime>|/localtime EXPR> but the returned values are localized for the standard Greenwich time zone. Note: When called in list context, $isdst, the last value returned by gmtime, is always C<0>. There is no Daylight Saving Time in GMT. Portability issues: L<perlport/gmtime>. =item goto LABEL X<goto> X<jump> X<jmp> =item goto EXPR =item goto &NAME =for Pod::Functions create spaghetti code The C<goto LABEL> form finds the statement labeled with LABEL and resumes execution there. It can't be used to get out of a block or subroutine given to L<C<sort>|/sort SUBNAME LIST>. It can be used to go almost anywhere else within the dynamic scope, including out of subroutines, but it's usually better to use some other construct such as L<C<last>|/last LABEL> or L<C<die>|/die LIST>. The author of Perl has never felt the need to use this form of L<C<goto>|/goto LABEL> (in Perl, that is; C is another matter). (The difference is that C does not offer named loops combined with loop control. Perl does, and this replaces most structured uses of L<C<goto>|/goto LABEL> in other languages.) The C<goto EXPR> form expects to evaluate C<EXPR> to a code reference or a label name. If it evaluates to a code reference, it will be handled like C<goto &NAME>, below. This is especially useful for implementing tail recursion via C<goto __SUB__>. If the expression evaluates to a label name, its scope will be resolved dynamically. This allows for computed L<C<goto>|/goto LABEL>s per FORTRAN, but isn't necessarily recommended if you're optimizing for maintainability: goto ("FOO", "BAR", "GLARCH")[$i]; As shown in this example, C<goto EXPR> is exempt from the "looks like a function" rule. A pair of parentheses following it does not (necessarily) delimit its argument. C<goto("NE")."XT"> is equivalent to C<goto NEXT>. Also, unlike most named operators, this has the same precedence as assignment. Use of C<goto LABEL> or C<goto EXPR> to jump into a construct is deprecated and will issue a warning. Even then, it may not be used to go into any construct that requires initialization, such as a subroutine, a C<foreach> loop, or a C<given> block. In general, it may not be used to jump into the parameter of a binary or list operator, but it may be used to jump into the I<first> parameter of a binary operator. (The C<=> assignment operator's "first" operand is its right-hand operand.) It also can't be used to go into a construct that is optimized away. The C<goto &NAME> form is quite different from the other forms of L<C<goto>|/goto LABEL>. In fact, it isn't a goto in the normal sense at all, and doesn't have the stigma associated with other gotos. Instead, it exits the current subroutine (losing any changes set by L<C<local>|/local EXPR>) and immediately calls in its place the named subroutine using the current value of L<C<@_>|perlvar/@_>. This is used by C<AUTOLOAD> subroutines that wish to load another subroutine and then pretend that the other subroutine had been called in the first place (except that any modifications to L<C<@_>|perlvar/@_> in the current subroutine are propagated to the other subroutine.) After the L<C<goto>|/goto LABEL>, not even L<C<caller>|/caller EXPR> will be able to tell that this routine was called first. NAME needn't be the name of a subroutine; it can be a scalar variable containing a code reference or a block that evaluates to a code reference. =item grep BLOCK LIST X<grep> =item grep EXPR,LIST =for Pod::Functions locate elements in a list test true against a given criterion This is similar in spirit to, but not the same as, L<grep(1)> and its relatives. In particular, it is not limited to using regular expressions. Evaluates the BLOCK or EXPR for each element of LIST (locally setting L<C<$_>|perlvar/$_> to each element) and returns the list value consisting of those elements for which the expression evaluated to true. In scalar context, returns the number of times the expression was true. my @foo = grep(!/^#/, @bar); # weed out comments or equivalently, my @foo = grep {!/^#/} @bar; # weed out comments Note that L<C<$_>|perlvar/$_> is an alias to the list value, so it can be used to modify the elements of the LIST. While this is useful and supported, it can cause bizarre results if the elements of LIST are not variables. Similarly, grep returns aliases into the original list, much as a for loop's index variable aliases the list elements. That is, modifying an element of a list returned by grep (for example, in a C<foreach>, L<C<map>|/map BLOCK LIST> or another L<C<grep>|/grep BLOCK LIST>) actually modifies the element in the original list. This is usually something to be avoided when writing clear code. See also L<C<map>|/map BLOCK LIST> for a list composed of the results of the BLOCK or EXPR. =item hex EXPR X<hex> X<hexadecimal> =item hex =for Pod::Functions convert a hexadecimal string to a number Interprets EXPR as a hex string and returns the corresponding numeric value. If EXPR is omitted, uses L<C<$_>|perlvar/$_>. print hex '0xAf'; # prints '175' print hex 'aF'; # same $valid_input =~ /\A(?:0?[xX])?(?:_?[0-9a-fA-F])*\z/ A hex string consists of hex digits and an optional C<0x> or C<x> prefix. Each hex digit may be preceded by a single underscore, which will be ignored. Any other character triggers a warning and causes the rest of the string to be ignored (even leading whitespace, unlike L<C<oct>|/oct EXPR>). Only integers can be represented, and integer overflow triggers a warning. To convert strings that might start with any of C<0>, C<0x>, or C<0b>, see L<C<oct>|/oct EXPR>. To present something as hex, look into L<C<printf>|/printf FILEHANDLE FORMAT, LIST>, L<C<sprintf>|/sprintf FORMAT, LIST>, and L<C<unpack>|/unpack TEMPLATE,EXPR>. =item import LIST X<import> =for Pod::Functions patch a module's namespace into your own There is no builtin L<C<import>|/import LIST> function. It is just an ordinary method (subroutine) defined (or inherited) by modules that wish to export names to another module. The L<C<use>|/use Module VERSION LIST> function calls the L<C<import>|/import LIST> method for the package used. See also L<C<use>|/use Module VERSION LIST>, L<perlmod>, and L<Exporter>. =item index STR,SUBSTR,POSITION X<index> X<indexOf> X<InStr> =item index STR,SUBSTR =for Pod::Functions find a substring within a string The index function searches for one string within another, but without the wildcard-like behavior of a full regular-expression pattern match. It returns the position of the first occurrence of SUBSTR in STR at or after POSITION. If POSITION is omitted, starts searching from the beginning of the string. POSITION before the beginning of the string or after its end is treated as if it were the beginning or the end, respectively. POSITION and the return value are based at zero. If the substring is not found, L<C<index>|/index STR,SUBSTR,POSITION> returns -1. =item int EXPR X<int> X<integer> X<truncate> X<trunc> X<floor> =item int =for Pod::Functions get the integer portion of a number Returns the integer portion of EXPR. If EXPR is omitted, uses L<C<$_>|perlvar/$_>. You should not use this function for rounding: one because it truncates towards C<0>, and two because machine representations of floating-point numbers can sometimes produce counterintuitive results. For example, C<int(-6.725/0.025)> produces -268 rather than the correct -269; that's because it's really more like -268.99999999999994315658 instead. Usually, the L<C<sprintf>|/sprintf FORMAT, LIST>, L<C<printf>|/printf FILEHANDLE FORMAT, LIST>, or the L<C<POSIX::floor>|POSIX/C<floor>> and L<C<POSIX::ceil>|POSIX/C<ceil>> functions will serve you better than will L<C<int>|/int EXPR>. =item ioctl FILEHANDLE,FUNCTION,SCALAR X<ioctl> =for Pod::Functions system-dependent device control system call Implements the L<ioctl(2)> function. You'll probably first have to say require "sys/ioctl.ph"; # probably in # $Config{archlib}/sys/ioctl.ph to get the correct function definitions. If F<sys/ioctl.ph> doesn't exist or doesn't have the correct definitions you'll have to roll your own, based on your C header files such as F<< <sys/ioctl.h> >>. (There is a Perl script called B<h2ph> that comes with the Perl kit that may help you in this, but it's nontrivial.) SCALAR will be read and/or written depending on the FUNCTION; a C pointer to the string value of SCALAR will be passed as the third argument of the actual L<C<ioctl>|/ioctl FILEHANDLE,FUNCTION,SCALAR> call. (If SCALAR has no string value but does have a numeric value, that value will be passed rather than a pointer to the string value. To guarantee this to be true, add a C<0> to the scalar before using it.) The L<C<pack>|/pack TEMPLATE,LIST> and L<C<unpack>|/unpack TEMPLATE,EXPR> functions may be needed to manipulate the values of structures used by L<C<ioctl>|/ioctl FILEHANDLE,FUNCTION,SCALAR>. The return value of L<C<ioctl>|/ioctl FILEHANDLE,FUNCTION,SCALAR> (and L<C<fcntl>|/fcntl FILEHANDLE,FUNCTION,SCALAR>) is as follows: if OS returns: then Perl returns: -1 undefined value 0 string "0 but true" anything else that number Thus Perl returns true on success and false on failure, yet you can still easily determine the actual value returned by the operating system: my $retval = ioctl(...) || -1; printf "System returned %d\n", $retval; The special string C<"0 but true"> is exempt from L<C<Argument "..." isn't numeric>|perldiag/Argument "%s" isn't numeric%s> L<warnings> on improper numeric conversions. Portability issues: L<perlport/ioctl>. =item join EXPR,LIST X<join> =for Pod::Functions join a list into a string using a separator Joins the separate strings of LIST into a single string with fields separated by the value of EXPR, and returns that new string. Example: my $rec = join(':', $login,$passwd,$uid,$gid,$gcos,$home,$shell); Beware that unlike L<C<split>|/split E<sol>PATTERNE<sol>,EXPR,LIMIT>, L<C<join>|/join EXPR,LIST> doesn't take a pattern as its first argument. Compare L<C<split>|/split E<sol>PATTERNE<sol>,EXPR,LIMIT>. =item keys HASH X<keys> X<key> =item keys ARRAY =for Pod::Functions retrieve list of indices from a hash Called in list context, returns a list consisting of all the keys of the named hash, or in Perl 5.12 or later only, the indices of an array. Perl releases prior to 5.12 will produce a syntax error if you try to use an array argument. In scalar context, returns the number of keys or indices. Hash entries are returned in an apparently random order. The actual random order is specific to a given hash; the exact same series of operations on two hashes may result in a different order for each hash. Any insertion into the hash may change the order, as will any deletion, with the exception that the most recent key returned by L<C<each>|/each HASH> or L<C<keys>|/keys HASH> may be deleted without changing the order. So long as a given hash is unmodified you may rely on L<C<keys>|/keys HASH>, L<C<values>|/values HASH> and L<C<each>|/each HASH> to repeatedly return the same order as each other. See L<perlsec/"Algorithmic Complexity Attacks"> for details on why hash order is randomized. Aside from the guarantees provided here the exact details of Perl's hash algorithm and the hash traversal order are subject to change in any release of Perl. Tied hashes may behave differently to Perl's hashes with respect to changes in order on insertion and deletion of items. As a side effect, calling L<C<keys>|/keys HASH> resets the internal iterator of the HASH or ARRAY (see L<C<each>|/each HASH>) before yielding the keys. In particular, calling L<C<keys>|/keys HASH> in void context resets the iterator with no other overhead. Here is yet another way to print your environment: my @keys = keys %ENV; my @values = values %ENV; while (@keys) { print pop(@keys), '=', pop(@values), "\n"; } or how about sorted by key: foreach my $key (sort(keys %ENV)) { print $key, '=', $ENV{$key}, "\n"; } The returned values are copies of the original keys in the hash, so modifying them will not affect the original hash. Compare L<C<values>|/values HASH>. To sort a hash by value, you'll need to use a L<C<sort>|/sort SUBNAME LIST> function. Here's a descending numeric sort of a hash by its values: foreach my $key (sort { $hash{$b} <=> $hash{$a} } keys %hash) { printf "%4d %s\n", $hash{$key}, $key; } Used as an lvalue, L<C<keys>|/keys HASH> allows you to increase the number of hash buckets allocated for the given hash. This can gain you a measure of efficiency if you know the hash is going to get big. (This is similar to pre-extending an array by assigning a larger number to $#array.) If you say keys %hash = 200; then C<%hash> will have at least 200 buckets allocated for it--256 of them, in fact, since it rounds up to the next power of two. These buckets will be retained even if you do C<%hash = ()>, use C<undef %hash> if you want to free the storage while C<%hash> is still in scope. You can't shrink the number of buckets allocated for the hash using L<C<keys>|/keys HASH> in this way (but you needn't worry about doing this by accident, as trying has no effect). C<keys @array> in an lvalue context is a syntax error. Starting with Perl 5.14, an experimental feature allowed L<C<keys>|/keys HASH> to take a scalar expression. This experiment has been deemed unsuccessful, and was removed as of Perl 5.24. To avoid confusing would-be users of your code who are running earlier versions of Perl with mysterious syntax errors, put this sort of thing at the top of your file to signal that your code will work I<only> on Perls of a recent vintage: use 5.012; # so keys/values/each work on arrays See also L<C<each>|/each HASH>, L<C<values>|/values HASH>, and L<C<sort>|/sort SUBNAME LIST>. =item kill SIGNAL, LIST =item kill SIGNAL X<kill> X<signal> =for Pod::Functions send a signal to a process or process group Sends a signal to a list of processes. Returns the number of arguments that were successfully used to signal (which is not necessarily the same as the number of processes actually killed, e.g. where a process group is killed). my $cnt = kill 'HUP', $child1, $child2; kill 'KILL', @goners; SIGNAL may be either a signal name (a string) or a signal number. A signal name may start with a C<SIG> prefix, thus C<FOO> and C<SIGFOO> refer to the same signal. The string form of SIGNAL is recommended for portability because the same signal may have different numbers in different operating systems. A list of signal names supported by the current platform can be found in C<$Config{sig_name}>, which is provided by the L<C<Config>|Config> module. See L<Config> for more details. A negative signal name is the same as a negative signal number, killing process groups instead of processes. For example, C<kill '-KILL', $pgrp> and C<kill -9, $pgrp> will send C<SIGKILL> to the entire process group specified. That means you usually want to use positive not negative signals. If SIGNAL is either the number 0 or the string C<ZERO> (or C<SIGZERO>), no signal is sent to the process, but L<C<kill>|/kill SIGNAL, LIST> checks whether it's I<possible> to send a signal to it (that means, to be brief, that the process is owned by the same user, or we are the super-user). This is useful to check that a child process is still alive (even if only as a zombie) and hasn't changed its UID. See L<perlport> for notes on the portability of this construct. The behavior of kill when a I<PROCESS> number is zero or negative depends on the operating system. For example, on POSIX-conforming systems, zero will signal the current process group, -1 will signal all processes, and any other negative PROCESS number will act as a negative signal number and kill the entire process group specified. If both the SIGNAL and the PROCESS are negative, the results are undefined. A warning may be produced in a future version. See L<perlipc/"Signals"> for more details. On some platforms such as Windows where the L<fork(2)> system call is not available, Perl can be built to emulate L<C<fork>|/fork> at the interpreter level. This emulation has limitations related to kill that have to be considered, for code running on Windows and in code intended to be portable. See L<perlfork> for more details. If there is no I<LIST> of processes, no signal is sent, and the return value is 0. This form is sometimes used, however, because it causes tainting checks to be run. But see L<perlsec/Laundering and Detecting Tainted Data>. Portability issues: L<perlport/kill>. =item last LABEL X<last> X<break> =item last EXPR =item last =for Pod::Functions exit a block prematurely The L<C<last>|/last LABEL> command is like the C<break> statement in C (as used in loops); it immediately exits the loop in question. If the LABEL is omitted, the command refers to the innermost enclosing loop. The C<last EXPR> form, available starting in Perl 5.18.0, allows a label name to be computed at run time, and is otherwise identical to C<last LABEL>. The L<C<continue>|/continue BLOCK> block, if any, is not executed: LINE: while (<STDIN>) { last LINE if /^$/; # exit when done with header #... } L<C<last>|/last LABEL> cannot return a value from a block that typically returns a value, such as C<eval {}>, C<sub {}>, or C<do {}>. It will perform its flow control behavior, which precludes any return value. It should not be used to exit a L<C<grep>|/grep BLOCK LIST> or L<C<map>|/map BLOCK LIST> operation. Note that a block by itself is semantically identical to a loop that executes once. Thus L<C<last>|/last LABEL> can be used to effect an early exit out of such a block. See also L<C<continue>|/continue BLOCK> for an illustration of how L<C<last>|/last LABEL>, L<C<next>|/next LABEL>, and L<C<redo>|/redo LABEL> work. Unlike most named operators, this has the same precedence as assignment. It is also exempt from the looks-like-a-function rule, so C<last ("foo")."bar"> will cause "bar" to be part of the argument to L<C<last>|/last LABEL>. =item lc EXPR X<lc> X<lowercase> =item lc =for Pod::Functions return lower-case version of a string Returns a lowercased version of EXPR. This is the internal function implementing the C<\L> escape in double-quoted strings. If EXPR is omitted, uses L<C<$_>|perlvar/$_>. What gets returned depends on several factors: =over =item If C<use bytes> is in effect: The results follow ASCII rules. Only the characters C<A-Z> change, to C<a-z> respectively. =item Otherwise, if C<use locale> for C<LC_CTYPE> is in effect: Respects current C<LC_CTYPE> locale for code points < 256; and uses Unicode rules for the remaining code points (this last can only happen if the UTF8 flag is also set). See L<perllocale>. Starting in v5.20, Perl uses full Unicode rules if the locale is UTF-8. Otherwise, there is a deficiency in this scheme, which is that case changes that cross the 255/256 boundary are not well-defined. For example, the lower case of LATIN CAPITAL LETTER SHARP S (U+1E9E) in Unicode rules is U+00DF (on ASCII platforms). But under C<use locale> (prior to v5.20 or not a UTF-8 locale), the lower case of U+1E9E is itself, because 0xDF may not be LATIN SMALL LETTER SHARP S in the current locale, and Perl has no way of knowing if that character even exists in the locale, much less what code point it is. Perl returns a result that is above 255 (almost always the input character unchanged), for all instances (and there aren't many) where the 255/256 boundary would otherwise be crossed; and starting in v5.22, it raises a L<locale|perldiag/Can't do %s("%s") on non-UTF-8 locale; resolved to "%s".> warning. =item Otherwise, If EXPR has the UTF8 flag set: Unicode rules are used for the case change. =item Otherwise, if C<use feature 'unicode_strings'> or C<use locale ':not_characters'> is in effect: Unicode rules are used for the case change. =item Otherwise: ASCII rules are used for the case change. The lowercase of any character outside the ASCII range is the character itself. =back =item lcfirst EXPR X<lcfirst> X<lowercase> =item lcfirst =for Pod::Functions return a string with just the next letter in lower case Returns the value of EXPR with the first character lowercased. This is the internal function implementing the C<\l> escape in double-quoted strings. If EXPR is omitted, uses L<C<$_>|perlvar/$_>. This function behaves the same way under various pragmas, such as in a locale, as L<C<lc>|/lc EXPR> does. =item length EXPR X<length> X<size> =item length =for Pod::Functions return the number of characters in a string Returns the length in I<characters> of the value of EXPR. If EXPR is omitted, returns the length of L<C<$_>|perlvar/$_>. If EXPR is undefined, returns L<C<undef>|/undef EXPR>. This function cannot be used on an entire array or hash to find out how many elements these have. For that, use C<scalar @array> and C<scalar keys %hash>, respectively. Like all Perl character operations, L<C<length>|/length EXPR> normally deals in logical characters, not physical bytes. For how many bytes a string encoded as UTF-8 would take up, use C<length(Encode::encode('UTF-8', EXPR))> (you'll have to C<use Encode> first). See L<Encode> and L<perlunicode>. =item __LINE__ X<__LINE__> =for Pod::Functions the current source line number A special token that compiles to the current line number. It can be altered by the mechanism described at L<perlsyn/"Plain Old Comments (Not!)">. =item link OLDFILE,NEWFILE X<link> =for Pod::Functions create a hard link in the filesystem Creates a new filename linked to the old filename. Returns true for success, false otherwise. Portability issues: L<perlport/link>. =item listen SOCKET,QUEUESIZE X<listen> =for Pod::Functions register your socket as a server Does the same thing that the L<listen(2)> system call does. Returns true if it succeeded, false otherwise. See the example in L<perlipc/"Sockets: Client/Server Communication">. =item local EXPR X<local> =for Pod::Functions create a temporary value for a global variable (dynamic scoping) You really probably want to be using L<C<my>|/my VARLIST> instead, because L<C<local>|/local EXPR> isn't what most people think of as "local". See L<perlsub/"Private Variables via my()"> for details. A local modifies the listed variables to be local to the enclosing block, file, or eval. If more than one value is listed, the list must be placed in parentheses. See L<perlsub/"Temporary Values via local()"> for details, including issues with tied arrays and hashes. The C<delete local EXPR> construct can also be used to localize the deletion of array/hash elements to the current block. See L<perlsub/"Localized deletion of elements of composite types">. =item localtime EXPR X<localtime> X<ctime> =item localtime =for Pod::Functions convert UNIX time into record or string using local time Converts a time as returned by the time function to a 9-element list with the time analyzed for the local time zone. Typically used as follows: # 0 1 2 3 4 5 6 7 8 my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime(time); All list elements are numeric and come straight out of the C `struct tm'. C<$sec>, C<$min>, and C<$hour> are the seconds, minutes, and hours of the specified time. C<$mday> is the day of the month and C<$mon> the month in the range C<0..11>, with 0 indicating January and 11 indicating December. This makes it easy to get a month name from a list: my @abbr = qw(Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec); print "$abbr[$mon] $mday"; # $mon=9, $mday=18 gives "Oct 18" C<$year> contains the number of years since 1900. To get a 4-digit year write: $year += 1900; To get the last two digits of the year (e.g., "01" in 2001) do: $year = sprintf("%02d", $year % 100); C<$wday> is the day of the week, with 0 indicating Sunday and 3 indicating Wednesday. C<$yday> is the day of the year, in the range C<0..364> (or C<0..365> in leap years.) C<$isdst> is true if the specified time occurs during Daylight Saving Time, false otherwise. If EXPR is omitted, L<C<localtime>|/localtime EXPR> uses the current time (as returned by L<C<time>|/time>). In scalar context, L<C<localtime>|/localtime EXPR> returns the L<ctime(3)> value: my $now_string = localtime; # e.g., "Thu Oct 13 04:54:34 1994" The format of this scalar value is B<not> locale-dependent but built into Perl. For GMT instead of local time use the L<C<gmtime>|/gmtime EXPR> builtin. See also the L<C<Time::Local>|Time::Local> module (for converting seconds, minutes, hours, and such back to the integer value returned by L<C<time>|/time>), and the L<POSIX> module's L<C<strftime>|POSIX/C<strftime>> and L<C<mktime>|POSIX/C<mktime>> functions. To get somewhat similar but locale-dependent date strings, set up your locale environment variables appropriately (please see L<perllocale>) and try for example: use POSIX qw(strftime); my $now_string = strftime "%a %b %e %H:%M:%S %Y", localtime; # or for GMT formatted appropriately for your locale: my $now_string = strftime "%a %b %e %H:%M:%S %Y", gmtime; Note that C<%a> and C<%b>, the short forms of the day of the week and the month of the year, may not necessarily be three characters wide. The L<Time::gmtime> and L<Time::localtime> modules provide a convenient, by-name access mechanism to the L<C<gmtime>|/gmtime EXPR> and L<C<localtime>|/localtime EXPR> functions, respectively. For a comprehensive date and time representation look at the L<DateTime> module on CPAN. Portability issues: L<perlport/localtime>. =item lock THING X<lock> =for Pod::Functions +5.005 get a thread lock on a variable, subroutine, or method This function places an advisory lock on a shared variable or referenced object contained in I<THING> until the lock goes out of scope. The value returned is the scalar itself, if the argument is a scalar, or a reference, if the argument is a hash, array or subroutine. L<C<lock>|/lock THING> is a "weak keyword"; this means that if you've defined a function by this name (before any calls to it), that function will be called instead. If you are not under C<use threads::shared> this does nothing. See L<threads::shared>. =item log EXPR X<log> X<logarithm> X<e> X<ln> X<base> =item log =for Pod::Functions retrieve the natural logarithm for a number Returns the natural logarithm (base I<e>) of EXPR. If EXPR is omitted, returns the log of L<C<$_>|perlvar/$_>. To get the log of another base, use basic algebra: The base-N log of a number is equal to the natural log of that number divided by the natural log of N. For example: sub log10 { my $n = shift; return log($n)/log(10); } See also L<C<exp>|/exp EXPR> for the inverse operation. =item lstat FILEHANDLE X<lstat> =item lstat EXPR =item lstat DIRHANDLE =item lstat =for Pod::Functions stat a symbolic link Does the same thing as the L<C<stat>|/stat FILEHANDLE> function (including setting the special C<_> filehandle) but stats a symbolic link instead of the file the symbolic link points to. If symbolic links are unimplemented on your system, a normal L<C<stat>|/stat FILEHANDLE> is done. For much more detailed information, please see the documentation for L<C<stat>|/stat FILEHANDLE>. If EXPR is omitted, stats L<C<$_>|perlvar/$_>. Portability issues: L<perlport/lstat>. =item m// =for Pod::Functions match a string with a regular expression pattern The match operator. See L<perlop/"Regexp Quote-Like Operators">. =item map BLOCK LIST X<map> =item map EXPR,LIST =for Pod::Functions apply a change to a list to get back a new list with the changes Evaluates the BLOCK or EXPR for each element of LIST (locally setting L<C<$_>|perlvar/$_> to each element) and composes a list of the results of each such evaluation. Each element of LIST may produce zero, one, or more elements in the generated list, so the number of elements in the generated list may differ from that in LIST. In scalar context, returns the total number of elements so generated. In list context, returns the generated list. my @chars = map(chr, @numbers); translates a list of numbers to the corresponding characters. my @squares = map { $_ * $_ } @numbers; translates a list of numbers to their squared values. my @squares = map { $_ > 5 ? ($_ * $_) : () } @numbers; shows that number of returned elements can differ from the number of input elements. To omit an element, return an empty list (). This could also be achieved by writing my @squares = map { $_ * $_ } grep { $_ > 5 } @numbers; which makes the intention more clear. Map always returns a list, which can be assigned to a hash such that the elements become key/value pairs. See L<perldata> for more details. my %hash = map { get_a_key_for($_) => $_ } @array; is just a funny way to write my %hash; foreach (@array) { $hash{get_a_key_for($_)} = $_; } Note that L<C<$_>|perlvar/$_> is an alias to the list value, so it can be used to modify the elements of the LIST. While this is useful and supported, it can cause bizarre results if the elements of LIST are not variables. Using a regular C<foreach> loop for this purpose would be clearer in most cases. See also L<C<grep>|/grep BLOCK LIST> for a list composed of those items of the original list for which the BLOCK or EXPR evaluates to true. C<{> starts both hash references and blocks, so C<map { ...> could be either the start of map BLOCK LIST or map EXPR, LIST. Because Perl doesn't look ahead for the closing C<}> it has to take a guess at which it's dealing with based on what it finds just after the C<{>. Usually it gets it right, but if it doesn't it won't realize something is wrong until it gets to the C<}> and encounters the missing (or unexpected) comma. The syntax error will be reported close to the C<}>, but you'll need to change something near the C<{> such as using a unary C<+> or semicolon to give Perl some help: my %hash = map { "\L$_" => 1 } @array # perl guesses EXPR. wrong my %hash = map { +"\L$_" => 1 } @array # perl guesses BLOCK. right my %hash = map {; "\L$_" => 1 } @array # this also works my %hash = map { ("\L$_" => 1) } @array # as does this my %hash = map { lc($_) => 1 } @array # and this. my %hash = map +( lc($_) => 1 ), @array # this is EXPR and works! my %hash = map ( lc($_), 1 ), @array # evaluates to (1, @array) or to force an anon hash constructor use C<+{>: my @hashes = map +{ lc($_) => 1 }, @array # EXPR, so needs # comma at end to get a list of anonymous hashes each with only one entry apiece. =item mkdir FILENAME,MODE X<mkdir> X<md> X<directory, create> =item mkdir FILENAME =item mkdir =for Pod::Functions create a directory Creates the directory specified by FILENAME, with permissions specified by MODE (as modified by L<C<umask>|/umask EXPR>). If it succeeds it returns true; otherwise it returns false and sets L<C<$!>|perlvar/$!> (errno). MODE defaults to 0777 if omitted, and FILENAME defaults to L<C<$_>|perlvar/$_> if omitted. In general, it is better to create directories with a permissive MODE and let the user modify that with their L<C<umask>|/umask EXPR> than it is to supply a restrictive MODE and give the user no way to be more permissive. The exceptions to this rule are when the file or directory should be kept private (mail files, for instance). The documentation for L<C<umask>|/umask EXPR> discusses the choice of MODE in more detail. Note that according to the POSIX 1003.1-1996 the FILENAME may have any number of trailing slashes. Some operating and filesystems do not get this right, so Perl automatically removes all trailing slashes to keep everyone happy. To recursively create a directory structure, look at the L<C<make_path>|File::Path/make_path( $dir1, $dir2, .... )> function of the L<File::Path> module. =item msgctl ID,CMD,ARG X<msgctl> =for Pod::Functions SysV IPC message control operations Calls the System V IPC function L<msgctl(2)>. You'll probably have to say use IPC::SysV; first to get the correct constant definitions. If CMD is C<IPC_STAT>, then ARG must be a variable that will hold the returned C<msqid_ds> structure. Returns like L<C<ioctl>|/ioctl FILEHANDLE,FUNCTION,SCALAR>: the undefined value for error, C<"0 but true"> for zero, or the actual return value otherwise. See also L<perlipc/"SysV IPC"> and the documentation for L<C<IPC::SysV>|IPC::SysV> and L<C<IPC::Semaphore>|IPC::Semaphore>. Portability issues: L<perlport/msgctl>. =item msgget KEY,FLAGS X<msgget> =for Pod::Functions get SysV IPC message queue Calls the System V IPC function L<msgget(2)>. Returns the message queue id, or L<C<undef>|/undef EXPR> on error. See also L<perlipc/"SysV IPC"> and the documentation for L<C<IPC::SysV>|IPC::SysV> and L<C<IPC::Msg>|IPC::Msg>. Portability issues: L<perlport/msgget>. =item msgrcv ID,VAR,SIZE,TYPE,FLAGS X<msgrcv> =for Pod::Functions receive a SysV IPC message from a message queue Calls the System V IPC function msgrcv to receive a message from message queue ID into variable VAR with a maximum message size of SIZE. Note that when a message is received, the message type as a native long integer will be the first thing in VAR, followed by the actual message. This packing may be opened with C<unpack("l! a*")>. Taints the variable. Returns true if successful, false on error. See also L<perlipc/"SysV IPC"> and the documentation for L<C<IPC::SysV>|IPC::SysV> and L<C<IPC::Msg>|IPC::Msg>. Portability issues: L<perlport/msgrcv>. =item msgsnd ID,MSG,FLAGS X<msgsnd> =for Pod::Functions send a SysV IPC message to a message queue Calls the System V IPC function msgsnd to send the message MSG to the message queue ID. MSG must begin with the native long integer message type, be followed by the length of the actual message, and then finally the message itself. This kind of packing can be achieved with C<pack("l! a*", $type, $message)>. Returns true if successful, false on error. See also L<perlipc/"SysV IPC"> and the documentation for L<C<IPC::SysV>|IPC::SysV> and L<C<IPC::Msg>|IPC::Msg>. Portability issues: L<perlport/msgsnd>. =item my VARLIST X<my> =item my TYPE VARLIST =item my VARLIST : ATTRS =item my TYPE VARLIST : ATTRS =for Pod::Functions declare and assign a local variable (lexical scoping) A L<C<my>|/my VARLIST> declares the listed variables to be local (lexically) to the enclosing block, file, or L<C<eval>|/eval EXPR>. If more than one variable is listed, the list must be placed in parentheses. The exact semantics and interface of TYPE and ATTRS are still evolving. TYPE may be a bareword, a constant declared with L<C<use constant>|constant>, or L<C<__PACKAGE__>|/__PACKAGE__>. It is currently bound to the use of the L<fields> pragma, and attributes are handled using the L<attributes> pragma, or starting from Perl 5.8.0 also via the L<Attribute::Handlers> module. See L<perlsub/"Private Variables via my()"> for details. Note that with a parenthesised list, L<C<undef>|/undef EXPR> can be used as a dummy placeholder, for example to skip assignment of initial values: my ( undef, $min, $hour ) = localtime; =item next LABEL X<next> X<continue> =item next EXPR =item next =for Pod::Functions iterate a block prematurely The L<C<next>|/next LABEL> command is like the C<continue> statement in C; it starts the next iteration of the loop: LINE: while (<STDIN>) { next LINE if /^#/; # discard comments #... } Note that if there were a L<C<continue>|/continue BLOCK> block on the above, it would get executed even on discarded lines. If LABEL is omitted, the command refers to the innermost enclosing loop. The C<next EXPR> form, available as of Perl 5.18.0, allows a label name to be computed at run time, being otherwise identical to C<next LABEL>. L<C<next>|/next LABEL> cannot return a value from a block that typically returns a value, such as C<eval {}>, C<sub {}>, or C<do {}>. It will perform its flow control behavior, which precludes any return value. It should not be used to exit a L<C<grep>|/grep BLOCK LIST> or L<C<map>|/map BLOCK LIST> operation. Note that a block by itself is semantically identical to a loop that executes once. Thus L<C<next>|/next LABEL> will exit such a block early. See also L<C<continue>|/continue BLOCK> for an illustration of how L<C<last>|/last LABEL>, L<C<next>|/next LABEL>, and L<C<redo>|/redo LABEL> work. Unlike most named operators, this has the same precedence as assignment. It is also exempt from the looks-like-a-function rule, so C<next ("foo")."bar"> will cause "bar" to be part of the argument to L<C<next>|/next LABEL>. =item no MODULE VERSION LIST X<no declarations> X<unimporting> =item no MODULE VERSION =item no MODULE LIST =item no MODULE =item no VERSION =for Pod::Functions unimport some module symbols or semantics at compile time See the L<C<use>|/use Module VERSION LIST> function, of which L<C<no>|/no MODULE VERSION LIST> is the opposite. =item oct EXPR X<oct> X<octal> X<hex> X<hexadecimal> X<binary> X<bin> =item oct =for Pod::Functions convert a string to an octal number Interprets EXPR as an octal string and returns the corresponding value. (If EXPR happens to start off with C<0x>, interprets it as a hex string. If EXPR starts off with C<0b>, it is interpreted as a binary string. Leading whitespace is ignored in all three cases.) The following will handle decimal, binary, octal, and hex in standard Perl notation: $val = oct($val) if $val =~ /^0/; If EXPR is omitted, uses L<C<$_>|perlvar/$_>. To go the other way (produce a number in octal), use L<C<sprintf>|/sprintf FORMAT, LIST> or L<C<printf>|/printf FILEHANDLE FORMAT, LIST>: my $dec_perms = (stat("filename"))[2] & 07777; my $oct_perm_str = sprintf "%o", $perms; The L<C<oct>|/oct EXPR> function is commonly used when a string such as C<644> needs to be converted into a file mode, for example. Although Perl automatically converts strings into numbers as needed, this automatic conversion assumes base 10. Leading white space is ignored without warning, as too are any trailing non-digits, such as a decimal point (L<C<oct>|/oct EXPR> only handles non-negative integers, not negative integers or floating point). =item open FILEHANDLE,MODE,EXPR X<open> X<pipe> X<file, open> X<fopen> =item open FILEHANDLE,MODE,EXPR,LIST =item open FILEHANDLE,MODE,REFERENCE =item open FILEHANDLE,EXPR =item open FILEHANDLE =for Pod::Functions open a file, pipe, or descriptor Associates an internal FILEHANDLE with the external file specified by EXPR. That filehandle will subsequently allow you to perform I/O operations on that file, such as reading from it or writing to it. Instead of a filename, you may specify an external command (plus an optional argument list) or a scalar reference, in order to open filehandles on commands or in-memory scalars, respectively. A thorough reference to C<open> follows. For a gentler introduction to the basics of C<open>, see also the L<perlopentut> manual page. =over =item Working with files Most often, C<open> gets invoked with three arguments: the required FILEHANDLE (usually an empty scalar variable), followed by MODE (usually a literal describing the I/O mode the filehandle will use), and then the filename that the new filehandle will refer to. =over =item Simple examples Reading from a file: open(my $fh, "<", "input.txt") or die "Can't open < input.txt: $!"; # Process every line in input.txt while (my $line = <$fh>) { # # ... do something interesting with $line here ... # } or writing to one: open(my $fh, ">", "output.txt") or die "Can't open > output.txt: $!"; print $fh "This line gets printed into output.txt.\n"; For a summary of common filehandle operations such as these, see L<perlintro/Files and I/O>. =item About filehandles The first argument to C<open>, labeled FILEHANDLE in this reference, is usually a scalar variable. (Exceptions exist, described in "Other considerations", below.) If the call to C<open> succeeds, then the expression provided as FILEHANDLE will get assigned an open I<filehandle>. That filehandle provides an internal reference to the specified external file, conveniently stored in a Perl variable, and ready for I/O operations such as reading and writing. =item About modes When calling C<open> with three or more arguments, the second argument -- labeled MODE here -- defines the I<open mode>. MODE is usually a literal string comprising special characters that define the intended I/O role of the filehandle being created: whether it's read-only, or read-and-write, and so on. If MODE is C<< < >>, the file is opened for input (read-only). If MODE is C<< > >>, the file is opened for output, with existing files first being truncated ("clobbered") and nonexisting files newly created. If MODE is C<<< >> >>>, the file is opened for appending, again being created if necessary. You can put a C<+> in front of the C<< > >> or C<< < >> to indicate that you want both read and write access to the file; thus C<< +< >> is almost always preferred for read/write updates--the C<< +> >> mode would clobber the file first. You can't usually use either read-write mode for updating textfiles, since they have variable-length records. See the B<-i> switch in L<perlrun|perlrun/-i[extension]> for a better approach. The file is created with permissions of C<0666> modified by the process's L<C<umask>|/umask EXPR> value. These various prefixes correspond to the L<fopen(3)> modes of C<r>, C<r+>, C<w>, C<w+>, C<a>, and C<a+>. More examples of different modes in action: # Open a file for concatenation open(my $log, ">>", "/usr/spool/news/twitlog") or warn "Couldn't open log file; discarding input"; # Open a file for reading and writing open(my $dbase, "+<", "dbase.mine") or die "Can't open 'dbase.mine' for update: $!"; =item Checking the return value Open returns nonzero on success, the undefined value otherwise. If the C<open> involved a pipe, the return value happens to be the pid of the subprocess. When opening a file, it's seldom a good idea to continue if the request failed, so C<open> is frequently used with L<C<die>|/die LIST>. Even if you want your code to do something other than C<die> on a failed open, you should still always check the return value from opening a file. =back =item Specifying I/O layers in MODE You can use the three-argument form of open to specify I/O layers (sometimes referred to as "disciplines") to apply to the new filehandle. These affect how the input and output are processed (see L<open> and L<PerlIO> for more details). For example: open(my $fh, "<:encoding(UTF-8)", $filename) || die "Can't open UTF-8 encoded $filename: $!"; This opens the UTF8-encoded file containing Unicode characters; see L<perluniintro>. Note that if layers are specified in the three-argument form, then default layers stored in L<C<${^OPEN}>|perlvar/${^OPEN}> (usually set by the L<open> pragma or the switch C<-CioD>) are ignored. Those layers will also be ignored if you specify a colon with no name following it. In that case the default layer for the operating system (:raw on Unix, :crlf on Windows) is used. On some systems (in general, DOS- and Windows-based systems) L<C<binmode>|/binmode FILEHANDLE, LAYER> is necessary when you're not working with a text file. For the sake of portability it is a good idea always to use it when appropriate, and never to use it when it isn't appropriate. Also, people can set their I/O to be by default UTF8-encoded Unicode, not bytes. =item Using C<undef> for temporary files As a special case the three-argument form with a read/write mode and the third argument being L<C<undef>|/undef EXPR>: open(my $tmp, "+>", undef) or die ... opens a filehandle to a newly created empty anonymous temporary file. (This happens under any mode, which makes C<< +> >> the only useful and sensible mode to use.) You will need to L<C<seek>|/seek FILEHANDLE,POSITION,WHENCE> to do the reading. =item Opening a filehandle into an in-memory scalar You can open filehandles directly to Perl scalars instead of a file or other resource external to the program. To do so, provide a reference to that scalar as the third argument to C<open>, like so: open(my $memory, ">", \$var) or die "Can't open memory file: $!"; print $memory "foo!\n"; # output will appear in $var To (re)open C<STDOUT> or C<STDERR> as an in-memory file, close it first: close STDOUT; open(STDOUT, ">", \$variable) or die "Can't open STDOUT: $!"; The scalars for in-memory files are treated as octet strings: unless the file is being opened with truncation the scalar may not contain any code points over 0xFF. Opening in-memory files I<can> fail for a variety of reasons. As with any other C<open>, check the return value for success. I<Technical note>: This feature works only when Perl is built with PerlIO -- the default, except with older (pre-5.16) Perl installations that were configured to not include it (e.g. via C<Configure -Uuseperlio>). You can see whether your Perl was built with PerlIO by running C<perl -V:useperlio>. If it says C<'define'>, you have PerlIO; otherwise you don't. See L<perliol> for detailed info on PerlIO. =item Opening a filehandle into a command If MODE is C<|->, then the filename is interpreted as a command to which output is to be piped, and if MODE is C<-|>, the filename is interpreted as a command that pipes output to us. In the two-argument (and one-argument) form, one should replace dash (C<->) with the command. See L<perlipc/"Using open() for IPC"> for more examples of this. (You are not allowed to L<C<open>|/open FILEHANDLE,MODE,EXPR> to a command that pipes both in I<and> out, but see L<IPC::Open2>, L<IPC::Open3>, and L<perlipc/"Bidirectional Communication with Another Process"> for alternatives.) open(my $article_fh, "-|", "caesar <$article") # decrypt # article or die "Can't start caesar: $!"; open(my $article_fh, "caesar <$article |") # ditto or die "Can't start caesar: $!"; open(my $out_fh, "|-", "sort >Tmp$$") # $$ is our process id or die "Can't start sort: $!"; In the form of pipe opens taking three or more arguments, if LIST is specified (extra arguments after the command name) then LIST becomes arguments to the command invoked if the platform supports it. The meaning of L<C<open>|/open FILEHANDLE,MODE,EXPR> with more than three arguments for non-pipe modes is not yet defined, but experimental "layers" may give extra LIST arguments meaning. If you open a pipe on the command C<-> (that is, specify either C<|-> or C<-|> with the one- or two-argument forms of L<C<open>|/open FILEHANDLE,MODE,EXPR>), an implicit L<C<fork>|/fork> is done, so L<C<open>|/open FILEHANDLE,MODE,EXPR> returns twice: in the parent process it returns the pid of the child process, and in the child process it returns (a defined) C<0>. Use C<defined($pid)> or C<//> to determine whether the open was successful. For example, use either my $child_pid = open(my $from_kid, "-|") // die "Can't fork: $!"; or my $child_pid = open(my $to_kid, "|-") // die "Can't fork: $!"; followed by if ($child_pid) { # am the parent: # either write $to_kid or else read $from_kid ... waitpid $child_pid, 0; } else { # am the child; use STDIN/STDOUT normally ... exit; } The filehandle behaves normally for the parent, but I/O to that filehandle is piped from/to the STDOUT/STDIN of the child process. In the child process, the filehandle isn't opened--I/O happens from/to the new STDOUT/STDIN. Typically this is used like the normal piped open when you want to exercise more control over just how the pipe command gets executed, such as when running setuid and you don't want to have to scan shell commands for metacharacters. The following blocks are more or less equivalent: open(my $fh, "|tr '[a-z]' '[A-Z]'"); open(my $fh, "|-", "tr '[a-z]' '[A-Z]'"); open(my $fh, "|-") || exec 'tr', '[a-z]', '[A-Z]'; open(my $fh, "|-", "tr", '[a-z]', '[A-Z]'); open(my $fh, "cat -n '$file'|"); open(my $fh, "-|", "cat -n '$file'"); open(my $fh, "-|") || exec "cat", "-n", $file; open(my $fh, "-|", "cat", "-n", $file); The last two examples in each block show the pipe as "list form", which is not yet supported on all platforms. (If your platform has a real L<C<fork>|/fork>, such as Linux and macOS, you can use the list form; it also works on Windows with Perl 5.22 or later.) You would want to use the list form of the pipe so you can pass literal arguments to the command without risk of the shell interpreting any shell metacharacters in them. However, this also bars you from opening pipes to commands that intentionally contain shell metacharacters, such as: open(my $fh, "|cat -n | expand -4 | lpr") || die "Can't open pipeline to lpr: $!"; See L<perlipc/"Safe Pipe Opens"> for more examples of this. =item Duping filehandles You may also, in the Bourne shell tradition, specify an EXPR beginning with C<< >& >>, in which case the rest of the string is interpreted as the name of a filehandle (or file descriptor, if numeric) to be duped (as in L<dup(2)>) and opened. You may use C<&> after C<< > >>, C<<< >> >>>, C<< < >>, C<< +> >>, C<<< +>> >>>, and C<< +< >>. The mode you specify should match the mode of the original filehandle. (Duping a filehandle does not take into account any existing contents of IO buffers.) If you use the three-argument form, then you can pass either a number, the name of a filehandle, or the normal "reference to a glob". Here is a script that saves, redirects, and restores C<STDOUT> and C<STDERR> using various methods: #!/usr/bin/perl open(my $oldout, ">&STDOUT") or die "Can't dup STDOUT: $!"; open(OLDERR, ">&", \*STDERR) or die "Can't dup STDERR: $!"; open(STDOUT, '>', "foo.out") or die "Can't redirect STDOUT: $!"; open(STDERR, ">&STDOUT") or die "Can't dup STDOUT: $!"; select STDERR; $| = 1; # make unbuffered select STDOUT; $| = 1; # make unbuffered print STDOUT "stdout 1\n"; # this works for print STDERR "stderr 1\n"; # subprocesses too open(STDOUT, ">&", $oldout) or die "Can't dup \$oldout: $!"; open(STDERR, ">&OLDERR") or die "Can't dup OLDERR: $!"; print STDOUT "stdout 2\n"; print STDERR "stderr 2\n"; If you specify C<< '<&=X' >>, where C<X> is a file descriptor number or a filehandle, then Perl will do an equivalent of C's L<fdopen(3)> of that file descriptor (and not call L<dup(2)>); this is more parsimonious of file descriptors. For example: # open for input, reusing the fileno of $fd open(my $fh, "<&=", $fd) or open(my $fh, "<&=$fd") or # open for append, using the fileno of $oldfh open(my $fh, ">>&=", $oldfh) Being parsimonious on filehandles is also useful (besides being parsimonious) for example when something is dependent on file descriptors, like for example locking using L<C<flock>|/flock FILEHANDLE,OPERATION>. If you do just C<< open(my $A, ">>&", $B) >>, the filehandle C<$A> will not have the same file descriptor as C<$B>, and therefore C<flock($A)> will not C<flock($B)> nor vice versa. But with C<< open(my $A, ">>&=", $B) >>, the filehandles will share the same underlying system file descriptor. Note that under Perls older than 5.8.0, Perl uses the standard C library's' L<fdopen(3)> to implement the C<=> functionality. On many Unix systems, L<fdopen(3)> fails when file descriptors exceed a certain value, typically 255. For Perls 5.8.0 and later, PerlIO is (most often) the default. =item Legacy usage This section describes ways to call C<open> outside of best practices; you may encounter these uses in older code. Perl does not consider their use deprecated, exactly, but neither is it recommended in new code, for the sake of clarity and readability. =over =item Specifying mode and filename as a single argument In the one- and two-argument forms of the call, the mode and filename should be concatenated (in that order), preferably separated by white space. You can--but shouldn't--omit the mode in these forms when that mode is C<< < >>. It is safe to use the two-argument form of L<C<open>|/open FILEHANDLE,MODE,EXPR> if the filename argument is a known literal. open(my $dbase, "+<dbase.mine") # ditto or die "Can't open 'dbase.mine' for update: $!"; In the two-argument (and one-argument) form, opening C<< <- >> or C<-> opens STDIN and opening C<< >- >> opens STDOUT. New code should favor the three-argument form of C<open> over this older form. Declaring the mode and the filename as two distinct arguments avoids any confusion between the two. =item Calling C<open> with one argument via global variables As a shortcut, a one-argument call takes the filename from the global scalar variable of the same name as the filehandle: $ARTICLE = 100; open(ARTICLE) or die "Can't find article $ARTICLE: $!\n"; Here C<$ARTICLE> must be a global (package) scalar variable - not one declared with L<C<my>|/my VARLIST> or L<C<state>|/state VARLIST>. =item Assigning a filehandle to a bareword An older style is to use a bareword as the filehandle, as open(FH, "<", "input.txt") or die "Can't open < input.txt: $!"; Then you can use C<FH> as the filehandle, in C<< close FH >> and C<< <FH> >> and so on. Note that it's a global variable, so this form is not recommended when dealing with filehandles other than Perl's built-in ones (e.g. STDOUT and STDIN). =back =item Other considerations =over =item Automatic filehandle closure The filehandle will be closed when its reference count reaches zero. If it is a lexically scoped variable declared with L<C<my>|/my VARLIST>, that usually means the end of the enclosing scope. However, this automatic close does not check for errors, so it is better to explicitly close filehandles, especially those used for writing: close($handle) || warn "close failed: $!"; =item Automatic pipe flushing Perl will attempt to flush all files opened for output before any operation that may do a fork, but this may not be supported on some platforms (see L<perlport>). To be safe, you may need to set L<C<$E<verbar>>|perlvar/$E<verbar>> (C<$AUTOFLUSH> in L<English>) or call the C<autoflush> method of L<C<IO::Handle>|IO::Handle/METHODS> on any open handles. On systems that support a close-on-exec flag on files, the flag will be set for the newly opened file descriptor as determined by the value of L<C<$^F>|perlvar/$^F>. See L<perlvar/$^F>. Closing any piped filehandle causes the parent process to wait for the child to finish, then returns the status value in L<C<$?>|perlvar/$?> and L<C<${^CHILD_ERROR_NATIVE}>|perlvar/${^CHILD_ERROR_NATIVE}>. =item Direct versus by-reference assignment of filehandles If FILEHANDLE -- the first argument in a call to C<open> -- is an undefined scalar variable (or array or hash element), a new filehandle is autovivified, meaning that the variable is assigned a reference to a newly allocated anonymous filehandle. Otherwise if FILEHANDLE is an expression, its value is the real filehandle. (This is considered a symbolic reference, so C<use strict "refs"> should I<not> be in effect.) =item Whitespace and special characters in the filename argument The filename passed to the one- and two-argument forms of L<C<open>|/open FILEHANDLE,MODE,EXPR> will have leading and trailing whitespace deleted and normal redirection characters honored. This property, known as "magic open", can often be used to good effect. A user could specify a filename of F<"rsh cat file |">, or you could change certain filenames as needed: $filename =~ s/(.*\.gz)\s*$/gzip -dc < $1|/; open(my $fh, $filename) or die "Can't open $filename: $!"; Use the three-argument form to open a file with arbitrary weird characters in it, open(my $fh, "<", $file) || die "Can't open $file: $!"; otherwise it's necessary to protect any leading and trailing whitespace: $file =~ s#^(\s)#./$1#; open(my $fh, "< $file\0") || die "Can't open $file: $!"; (this may not work on some bizarre filesystems). One should conscientiously choose between the I<magic> and I<three-argument> form of L<C<open>|/open FILEHANDLE,MODE,EXPR>: open(my $in, $ARGV[0]) || die "Can't open $ARGV[0]: $!"; will allow the user to specify an argument of the form C<"rsh cat file |">, but will not work on a filename that happens to have a trailing space, while open(my $in, "<", $ARGV[0]) || die "Can't open $ARGV[0]: $!"; will have exactly the opposite restrictions. (However, some shells support the syntax C<< perl your_program.pl <( rsh cat file ) >>, which produces a filename that can be opened normally.) =item Invoking C-style C<open> If you want a "real" C L<open(2)>, then you should use the L<C<sysopen>|/sysopen FILEHANDLE,FILENAME,MODE> function, which involves no such magic (but uses different filemodes than Perl L<C<open>|/open FILEHANDLE,MODE,EXPR>, which corresponds to C L<fopen(3)>). This is another way to protect your filenames from interpretation. For example: use IO::Handle; sysopen(my $fh, $path, O_RDWR|O_CREAT|O_EXCL) or die "Can't open $path: $!"; $fh->autoflush(1); print $fh "stuff $$\n"; seek($fh, 0, 0); print "File contains: ", readline($fh); See L<C<seek>|/seek FILEHANDLE,POSITION,WHENCE> for some details about mixing reading and writing. =item Portability issues See L<perlport/open>. =back =back =item opendir DIRHANDLE,EXPR X<opendir> =for Pod::Functions open a directory Opens a directory named EXPR for processing by L<C<readdir>|/readdir DIRHANDLE>, L<C<telldir>|/telldir DIRHANDLE>, L<C<seekdir>|/seekdir DIRHANDLE,POS>, L<C<rewinddir>|/rewinddir DIRHANDLE>, and L<C<closedir>|/closedir DIRHANDLE>. Returns true if successful. DIRHANDLE may be an expression whose value can be used as an indirect dirhandle, usually the real dirhandle name. If DIRHANDLE is an undefined scalar variable (or array or hash element), the variable is assigned a reference to a new anonymous dirhandle; that is, it's autovivified. Dirhandles are the same objects as filehandles; an I/O object can only be open as one of these handle types at once. See the example at L<C<readdir>|/readdir DIRHANDLE>. =item ord EXPR X<ord> X<encoding> =item ord =for Pod::Functions find a character's numeric representation Returns the numeric value of the first character of EXPR. If EXPR is an empty string, returns 0. If EXPR is omitted, uses L<C<$_>|perlvar/$_>. (Note I<character>, not byte.) For the reverse, see L<C<chr>|/chr NUMBER>. See L<perlunicode> for more about Unicode. =item our VARLIST X<our> X<global> =item our TYPE VARLIST =item our VARLIST : ATTRS =item our TYPE VARLIST : ATTRS =for Pod::Functions +5.6.0 declare and assign a package variable (lexical scoping) L<C<our>|/our VARLIST> makes a lexical alias to a package (i.e. global) variable of the same name in the current package for use within the current lexical scope. L<C<our>|/our VARLIST> has the same scoping rules as L<C<my>|/my VARLIST> or L<C<state>|/state VARLIST>, meaning that it is only valid within a lexical scope. Unlike L<C<my>|/my VARLIST> and L<C<state>|/state VARLIST>, which both declare new (lexical) variables, L<C<our>|/our VARLIST> only creates an alias to an existing variable: a package variable of the same name. This means that when C<use strict 'vars'> is in effect, L<C<our>|/our VARLIST> lets you use a package variable without qualifying it with the package name, but only within the lexical scope of the L<C<our>|/our VARLIST> declaration. This applies immediately--even within the same statement. package Foo; use strict; $Foo::foo = 23; { our $foo; # alias to $Foo::foo print $foo; # prints 23 } print $Foo::foo; # prints 23 print $foo; # ERROR: requires explicit package name This works even if the package variable has not been used before, as package variables spring into existence when first used. package Foo; use strict; our $foo = 23; # just like $Foo::foo = 23 print $Foo::foo; # prints 23 Because the variable becomes legal immediately under C<use strict 'vars'>, so long as there is no variable with that name is already in scope, you can then reference the package variable again even within the same statement. package Foo; use strict; my $foo = $foo; # error, undeclared $foo on right-hand side our $foo = $foo; # no errors If more than one variable is listed, the list must be placed in parentheses. our($bar, $baz); An L<C<our>|/our VARLIST> declaration declares an alias for a package variable that will be visible across its entire lexical scope, even across package boundaries. The package in which the variable is entered is determined at the point of the declaration, not at the point of use. This means the following behavior holds: package Foo; our $bar; # declares $Foo::bar for rest of lexical scope $bar = 20; package Bar; print $bar; # prints 20, as it refers to $Foo::bar Multiple L<C<our>|/our VARLIST> declarations with the same name in the same lexical scope are allowed if they are in different packages. If they happen to be in the same package, Perl will emit warnings if you have asked for them, just like multiple L<C<my>|/my VARLIST> declarations. Unlike a second L<C<my>|/my VARLIST> declaration, which will bind the name to a fresh variable, a second L<C<our>|/our VARLIST> declaration in the same package, in the same scope, is merely redundant. use warnings; package Foo; our $bar; # declares $Foo::bar for rest of lexical scope $bar = 20; package Bar; our $bar = 30; # declares $Bar::bar for rest of lexical scope print $bar; # prints 30 our $bar; # emits warning but has no other effect print $bar; # still prints 30 An L<C<our>|/our VARLIST> declaration may also have a list of attributes associated with it. The exact semantics and interface of TYPE and ATTRS are still evolving. TYPE is currently bound to the use of the L<fields> pragma, and attributes are handled using the L<attributes> pragma, or, starting from Perl 5.8.0, also via the L<Attribute::Handlers> module. See L<perlsub/"Private Variables via my()"> for details. Note that with a parenthesised list, L<C<undef>|/undef EXPR> can be used as a dummy placeholder, for example to skip assignment of initial values: our ( undef, $min, $hour ) = localtime; L<C<our>|/our VARLIST> differs from L<C<use vars>|vars>, which allows use of an unqualified name I<only> within the affected package, but across scopes. =item pack TEMPLATE,LIST X<pack> =for Pod::Functions convert a list into a binary representation Takes a LIST of values and converts it into a string using the rules given by the TEMPLATE. The resulting string is the concatenation of the converted values. Typically, each converted value looks like its machine-level representation. For example, on 32-bit machines an integer may be represented by a sequence of 4 bytes, which will in Perl be presented as a string that's 4 characters long. See L<perlpacktut> for an introduction to this function. The TEMPLATE is a sequence of characters that give the order and type of values, as follows: a A string with arbitrary binary data, will be null padded. A A text (ASCII) string, will be space padded. Z A null-terminated (ASCIZ) string, will be null padded. b A bit string (ascending bit order inside each byte, like vec()). B A bit string (descending bit order inside each byte). h A hex string (low nybble first). H A hex string (high nybble first). c A signed char (8-bit) value. C An unsigned char (octet) value. W An unsigned char value (can be greater than 255). s A signed short (16-bit) value. S An unsigned short value. l A signed long (32-bit) value. L An unsigned long value. q A signed quad (64-bit) value. Q An unsigned quad value. (Quads are available only if your system supports 64-bit integer values _and_ if Perl has been compiled to support those. Raises an exception otherwise.) i A signed integer value. I An unsigned integer value. (This 'integer' is _at_least_ 32 bits wide. Its exact size depends on what a local C compiler calls 'int'.) n An unsigned short (16-bit) in "network" (big-endian) order. N An unsigned long (32-bit) in "network" (big-endian) order. v An unsigned short (16-bit) in "VAX" (little-endian) order. V An unsigned long (32-bit) in "VAX" (little-endian) order. j A Perl internal signed integer value (IV). J A Perl internal unsigned integer value (UV). f A single-precision float in native format. d A double-precision float in native format. F A Perl internal floating-point value (NV) in native format D A float of long-double precision in native format. (Long doubles are available only if your system supports long double values _and_ if Perl has been compiled to support those. Raises an exception otherwise. Note that there are different long double formats.) p A pointer to a null-terminated string. P A pointer to a structure (fixed-length string). u A uuencoded string. U A Unicode character number. Encodes to a character in char- acter mode and UTF-8 (or UTF-EBCDIC in EBCDIC platforms) in byte mode. w A BER compressed integer (not an ASN.1 BER, see perlpacktut for details). Its bytes represent an unsigned integer in base 128, most significant digit first, with as few digits as possible. Bit eight (the high bit) is set on each byte except the last. x A null byte (a.k.a ASCII NUL, "\000", chr(0)) X Back up a byte. @ Null-fill or truncate to absolute position, counted from the start of the innermost ()-group. . Null-fill or truncate to absolute position specified by the value. ( Start of a ()-group. One or more modifiers below may optionally follow certain letters in the TEMPLATE (the second column lists letters for which the modifier is valid): ! sSlLiI Forces native (short, long, int) sizes instead of fixed (16-/32-bit) sizes. ! xX Make x and X act as alignment commands. ! nNvV Treat integers as signed instead of unsigned. ! @. Specify position as byte offset in the internal representation of the packed string. Efficient but dangerous. > sSiIlLqQ Force big-endian byte-order on the type. jJfFdDpP (The "big end" touches the construct.) < sSiIlLqQ Force little-endian byte-order on the type. jJfFdDpP (The "little end" touches the construct.) The C<< > >> and C<< < >> modifiers can also be used on C<()> groups to force a particular byte-order on all components in that group, including all its subgroups. =begin comment Larry recalls that the hex and bit string formats (H, h, B, b) were added to pack for processing data from NASA's Magellan probe. Magellan was in an elliptical orbit, using the antenna for the radar mapping when close to Venus and for communicating data back to Earth for the rest of the orbit. There were two transmission units, but one of these failed, and then the other developed a fault whereby it would randomly flip the sense of all the bits. It was easy to automatically detect complete records with the correct sense, and complete records with all the bits flipped. However, this didn't recover the records where the sense flipped midway. A colleague of Larry's was able to pretty much eyeball where the records flipped, so they wrote an editor named kybble (a pun on the dog food Kibbles 'n Bits) to enable him to manually correct the records and recover the data. For this purpose pack gained the hex and bit string format specifiers. git shows that they were added to perl 3.0 in patch #44 (Jan 1991, commit 27e2fb84680b9cc1), but the patch description makes no mention of their addition, let alone the story behind them. =end comment The following rules apply: =over =item * Each letter may optionally be followed by a number indicating the repeat count. A numeric repeat count may optionally be enclosed in brackets, as in C<pack("C[80]", @arr)>. The repeat count gobbles that many values from the LIST when used with all format types other than C<a>, C<A>, C<Z>, C<b>, C<B>, C<h>, C<H>, C<@>, C<.>, C<x>, C<X>, and C<P>, where it means something else, described below. Supplying a C<*> for the repeat count instead of a number means to use however many items are left, except for: =over =item * C<@>, C<x>, and C<X>, where it is equivalent to C<0>. =item * <.>, where it means relative to the start of the string. =item * C<u>, where it is equivalent to 1 (or 45, which here is equivalent). =back One can replace a numeric repeat count with a template letter enclosed in brackets to use the packed byte length of the bracketed template for the repeat count. For example, the template C<x[L]> skips as many bytes as in a packed long, and the template C<"$t X[$t] $t"> unpacks twice whatever $t (when variable-expanded) unpacks. If the template in brackets contains alignment commands (such as C<x![d]>), its packed length is calculated as if the start of the template had the maximal possible alignment. When used with C<Z>, a C<*> as the repeat count is guaranteed to add a trailing null byte, so the resulting string is always one byte longer than the byte length of the item itself. When used with C<@>, the repeat count represents an offset from the start of the innermost C<()> group. When used with C<.>, the repeat count determines the starting position to calculate the value offset as follows: =over =item * If the repeat count is C<0>, it's relative to the current position. =item * If the repeat count is C<*>, the offset is relative to the start of the packed string. =item * And if it's an integer I<n>, the offset is relative to the start of the I<n>th innermost C<( )> group, or to the start of the string if I<n> is bigger then the group level. =back The repeat count for C<u> is interpreted as the maximal number of bytes to encode per line of output, with 0, 1 and 2 replaced by 45. The repeat count should not be more than 65. =item * The C<a>, C<A>, and C<Z> types gobble just one value, but pack it as a string of length count, padding with nulls or spaces as needed. When unpacking, C<A> strips trailing whitespace and nulls, C<Z> strips everything after the first null, and C<a> returns data with no stripping at all. If the value to pack is too long, the result is truncated. If it's too long and an explicit count is provided, C<Z> packs only C<$count-1> bytes, followed by a null byte. Thus C<Z> always packs a trailing null, except when the count is 0. =item * Likewise, the C<b> and C<B> formats pack a string that's that many bits long. Each such format generates 1 bit of the result. These are typically followed by a repeat count like C<B8> or C<B64>. Each result bit is based on the least-significant bit of the corresponding input character, i.e., on C<ord($char)%2>. In particular, characters C<"0"> and C<"1"> generate bits 0 and 1, as do characters C<"\000"> and C<"\001">. Starting from the beginning of the input string, each 8-tuple of characters is converted to 1 character of output. With format C<b>, the first character of the 8-tuple determines the least-significant bit of a character; with format C<B>, it determines the most-significant bit of a character. If the length of the input string is not evenly divisible by 8, the remainder is packed as if the input string were padded by null characters at the end. Similarly during unpacking, "extra" bits are ignored. If the input string is longer than needed, remaining characters are ignored. A C<*> for the repeat count uses all characters of the input field. On unpacking, bits are converted to a string of C<0>s and C<1>s. =item * The C<h> and C<H> formats pack a string that many nybbles (4-bit groups, representable as hexadecimal digits, C<"0".."9"> C<"a".."f">) long. For each such format, L<C<pack>|/pack TEMPLATE,LIST> generates 4 bits of result. With non-alphabetical characters, the result is based on the 4 least-significant bits of the input character, i.e., on C<ord($char)%16>. In particular, characters C<"0"> and C<"1"> generate nybbles 0 and 1, as do bytes C<"\000"> and C<"\001">. For characters C<"a".."f"> and C<"A".."F">, the result is compatible with the usual hexadecimal digits, so that C<"a"> and C<"A"> both generate the nybble C<0xA==10>. Use only these specific hex characters with this format. Starting from the beginning of the template to L<C<pack>|/pack TEMPLATE,LIST>, each pair of characters is converted to 1 character of output. With format C<h>, the first character of the pair determines the least-significant nybble of the output character; with format C<H>, it determines the most-significant nybble. If the length of the input string is not even, it behaves as if padded by a null character at the end. Similarly, "extra" nybbles are ignored during unpacking. If the input string is longer than needed, extra characters are ignored. A C<*> for the repeat count uses all characters of the input field. For L<C<unpack>|/unpack TEMPLATE,EXPR>, nybbles are converted to a string of hexadecimal digits. =item * The C<p> format packs a pointer to a null-terminated string. You are responsible for ensuring that the string is not a temporary value, as that could potentially get deallocated before you got around to using the packed result. The C<P> format packs a pointer to a structure of the size indicated by the length. A null pointer is created if the corresponding value for C<p> or C<P> is L<C<undef>|/undef EXPR>; similarly with L<C<unpack>|/unpack TEMPLATE,EXPR>, where a null pointer unpacks into L<C<undef>|/undef EXPR>. If your system has a strange pointer size--meaning a pointer is neither as big as an int nor as big as a long--it may not be possible to pack or unpack pointers in big- or little-endian byte order. Attempting to do so raises an exception. =item * The C</> template character allows packing and unpacking of a sequence of items where the packed structure contains a packed item count followed by the packed items themselves. This is useful when the structure you're unpacking has encoded the sizes or repeat counts for some of its fields within the structure itself as separate fields. For L<C<pack>|/pack TEMPLATE,LIST>, you write I<length-item>C</>I<sequence-item>, and the I<length-item> describes how the length value is packed. Formats likely to be of most use are integer-packing ones like C<n> for Java strings, C<w> for ASN.1 or SNMP, and C<N> for Sun XDR. For L<C<pack>|/pack TEMPLATE,LIST>, I<sequence-item> may have a repeat count, in which case the minimum of that and the number of available items is used as the argument for I<length-item>. If it has no repeat count or uses a '*', the number of available items is used. For L<C<unpack>|/unpack TEMPLATE,EXPR>, an internal stack of integer arguments unpacked so far is used. You write C</>I<sequence-item> and the repeat count is obtained by popping off the last element from the stack. The I<sequence-item> must not have a repeat count. If I<sequence-item> refers to a string type (C<"A">, C<"a">, or C<"Z">), the I<length-item> is the string length, not the number of strings. With an explicit repeat count for pack, the packed string is adjusted to that length. For example: This code: gives this result: unpack("W/a", "\004Gurusamy") ("Guru") unpack("a3/A A*", "007 Bond J ") (" Bond", "J") unpack("a3 x2 /A A*", "007: Bond, J.") ("Bond, J", ".") pack("n/a* w/a","hello,","world") "\000\006hello,\005world" pack("a/W2", ord("a") .. ord("z")) "2ab" The I<length-item> is not returned explicitly from L<C<unpack>|/unpack TEMPLATE,EXPR>. Supplying a count to the I<length-item> format letter is only useful with C<A>, C<a>, or C<Z>. Packing with a I<length-item> of C<a> or C<Z> may introduce C<"\000"> characters, which Perl does not regard as legal in numeric strings. =item * The integer types C<s>, C<S>, C<l>, and C<L> may be followed by a C<!> modifier to specify native shorts or longs. As shown in the example above, a bare C<l> means exactly 32 bits, although the native C<long> as seen by the local C compiler may be larger. This is mainly an issue on 64-bit platforms. You can see whether using C<!> makes any difference this way: printf "format s is %d, s! is %d\n", length pack("s"), length pack("s!"); printf "format l is %d, l! is %d\n", length pack("l"), length pack("l!"); C<i!> and C<I!> are also allowed, but only for completeness' sake: they are identical to C<i> and C<I>. The actual sizes (in bytes) of native shorts, ints, longs, and long longs on the platform where Perl was built are also available from the command line: $ perl -V:{short,int,long{,long}}size shortsize='2'; intsize='4'; longsize='4'; longlongsize='8'; or programmatically via the L<C<Config>|Config> module: use Config; print $Config{shortsize}, "\n"; print $Config{intsize}, "\n"; print $Config{longsize}, "\n"; print $Config{longlongsize}, "\n"; C<$Config{longlongsize}> is undefined on systems without long long support. =item * The integer formats C<s>, C<S>, C<i>, C<I>, C<l>, C<L>, C<j>, and C<J> are inherently non-portable between processors and operating systems because they obey native byteorder and endianness. For example, a 4-byte integer 0x12345678 (305419896 decimal) would be ordered natively (arranged in and handled by the CPU registers) into bytes as 0x12 0x34 0x56 0x78 # big-endian 0x78 0x56 0x34 0x12 # little-endian Basically, Intel and VAX CPUs are little-endian, while everybody else, including Motorola m68k/88k, PPC, Sparc, HP PA, Power, and Cray, are big-endian. Alpha and MIPS can be either: Digital/Compaq uses (well, used) them in little-endian mode, but SGI/Cray uses them in big-endian mode. The names I<big-endian> and I<little-endian> are comic references to the egg-eating habits of the little-endian Lilliputians and the big-endian Blefuscudians from the classic Jonathan Swift satire, I<Gulliver's Travels>. This entered computer lingo via the paper "On Holy Wars and a Plea for Peace" by Danny Cohen, USC/ISI IEN 137, April 1, 1980. Some systems may have even weirder byte orders such as 0x56 0x78 0x12 0x34 0x34 0x12 0x78 0x56 These are called mid-endian, middle-endian, mixed-endian, or just weird. You can determine your system endianness with this incantation: printf("%#02x ", $_) for unpack("W*", pack L=>0x12345678); The byteorder on the platform where Perl was built is also available via L<Config>: use Config; print "$Config{byteorder}\n"; or from the command line: $ perl -V:byteorder Byteorders C<"1234"> and C<"12345678"> are little-endian; C<"4321"> and C<"87654321"> are big-endian. Systems with multiarchitecture binaries will have C<"ffff">, signifying that static information doesn't work, one must use runtime probing. For portably packed integers, either use the formats C<n>, C<N>, C<v>, and C<V> or else use the C<< > >> and C<< < >> modifiers described immediately below. See also L<perlport>. =item * Also floating point numbers have endianness. Usually (but not always) this agrees with the integer endianness. Even though most platforms these days use the IEEE 754 binary format, there are differences, especially if the long doubles are involved. You can see the C<Config> variables C<doublekind> and C<longdblkind> (also C<doublesize>, C<longdblsize>): the "kind" values are enums, unlike C<byteorder>. Portability-wise the best option is probably to keep to the IEEE 754 64-bit doubles, and of agreed-upon endianness. Another possibility is the C<"%a">) format of L<C<printf>|/printf FILEHANDLE FORMAT, LIST>. =item * Starting with Perl 5.10.0, integer and floating-point formats, along with the C<p> and C<P> formats and C<()> groups, may all be followed by the C<< > >> or C<< < >> endianness modifiers to respectively enforce big- or little-endian byte-order. These modifiers are especially useful given how C<n>, C<N>, C<v>, and C<V> don't cover signed integers, 64-bit integers, or floating-point values. Here are some concerns to keep in mind when using an endianness modifier: =over =item * Exchanging signed integers between different platforms works only when all platforms store them in the same format. Most platforms store signed integers in two's-complement notation, so usually this is not an issue. =item * The C<< > >> or C<< < >> modifiers can only be used on floating-point formats on big- or little-endian machines. Otherwise, attempting to use them raises an exception. =item * Forcing big- or little-endian byte-order on floating-point values for data exchange can work only if all platforms use the same binary representation such as IEEE floating-point. Even if all platforms are using IEEE, there may still be subtle differences. Being able to use C<< > >> or C<< < >> on floating-point values can be useful, but also dangerous if you don't know exactly what you're doing. It is not a general way to portably store floating-point values. =item * When using C<< > >> or C<< < >> on a C<()> group, this affects all types inside the group that accept byte-order modifiers, including all subgroups. It is silently ignored for all other types. You are not allowed to override the byte-order within a group that already has a byte-order modifier suffix. =back =item * Real numbers (floats and doubles) are in native machine format only. Due to the multiplicity of floating-point formats and the lack of a standard "network" representation for them, no facility for interchange has been made. This means that packed floating-point data written on one machine may not be readable on another, even if both use IEEE floating-point arithmetic (because the endianness of the memory representation is not part of the IEEE spec). See also L<perlport>. If you know I<exactly> what you're doing, you can use the C<< > >> or C<< < >> modifiers to force big- or little-endian byte-order on floating-point values. Because Perl uses doubles (or long doubles, if configured) internally for all numeric calculation, converting from double into float and thence to double again loses precision, so C<unpack("f", pack("f", $foo)>) will not in general equal $foo. =item * Pack and unpack can operate in two modes: character mode (C<C0> mode) where the packed string is processed per character, and UTF-8 byte mode (C<U0> mode) where the packed string is processed in its UTF-8-encoded Unicode form on a byte-by-byte basis. Character mode is the default unless the format string starts with C<U>. You can always switch mode mid-format with an explicit C<C0> or C<U0> in the format. This mode remains in effect until the next mode change, or until the end of the C<()> group it (directly) applies to. Using C<C0> to get Unicode characters while using C<U0> to get I<non>-Unicode bytes is not necessarily obvious. Probably only the first of these is what you want: $ perl -CS -E 'say "\x{3B1}\x{3C9}"' | perl -CS -ne 'printf "%v04X\n", $_ for unpack("C0A*", $_)' 03B1.03C9 $ perl -CS -E 'say "\x{3B1}\x{3C9}"' | perl -CS -ne 'printf "%v02X\n", $_ for unpack("U0A*", $_)' CE.B1.CF.89 $ perl -CS -E 'say "\x{3B1}\x{3C9}"' | perl -C0 -ne 'printf "%v02X\n", $_ for unpack("C0A*", $_)' CE.B1.CF.89 $ perl -CS -E 'say "\x{3B1}\x{3C9}"' | perl -C0 -ne 'printf "%v02X\n", $_ for unpack("U0A*", $_)' C3.8E.C2.B1.C3.8F.C2.89 Those examples also illustrate that you should not try to use L<C<pack>|/pack TEMPLATE,LIST>/L<C<unpack>|/unpack TEMPLATE,EXPR> as a substitute for the L<Encode> module. =item * You must yourself do any alignment or padding by inserting, for example, enough C<"x">es while packing. There is no way for L<C<pack>|/pack TEMPLATE,LIST> and L<C<unpack>|/unpack TEMPLATE,EXPR> to know where characters are going to or coming from, so they handle their output and input as flat sequences of characters. =item * A C<()> group is a sub-TEMPLATE enclosed in parentheses. A group may take a repeat count either as postfix, or for L<C<unpack>|/unpack TEMPLATE,EXPR>, also via the C</> template character. Within each repetition of a group, positioning with C<@> starts over at 0. Therefore, the result of pack("@1A((@2A)@3A)", qw[X Y Z]) is the string C<"\0X\0\0YZ">. =item * C<x> and C<X> accept the C<!> modifier to act as alignment commands: they jump forward or back to the closest position aligned at a multiple of C<count> characters. For example, to L<C<pack>|/pack TEMPLATE,LIST> or L<C<unpack>|/unpack TEMPLATE,EXPR> a C structure like struct { char c; /* one signed, 8-bit character */ double d; char cc[2]; } one may need to use the template C<c x![d] d c[2]>. This assumes that doubles must be aligned to the size of double. For alignment commands, a C<count> of 0 is equivalent to a C<count> of 1; both are no-ops. =item * C<n>, C<N>, C<v> and C<V> accept the C<!> modifier to represent signed 16-/32-bit integers in big-/little-endian order. This is portable only when all platforms sharing packed data use the same binary representation for signed integers; for example, when all platforms use two's-complement representation. =item * Comments can be embedded in a TEMPLATE using C<#> through the end of line. White space can separate pack codes from each other, but modifiers and repeat counts must follow immediately. Breaking complex templates into individual line-by-line components, suitably annotated, can do as much to improve legibility and maintainability of pack/unpack formats as C</x> can for complicated pattern matches. =item * If TEMPLATE requires more arguments than L<C<pack>|/pack TEMPLATE,LIST> is given, L<C<pack>|/pack TEMPLATE,LIST> assumes additional C<""> arguments. If TEMPLATE requires fewer arguments than given, extra arguments are ignored. =item * Attempting to pack the special floating point values C<Inf> and C<NaN> (infinity, also in negative, and not-a-number) into packed integer values (like C<"L">) is a fatal error. The reason for this is that there simply isn't any sensible mapping for these special values into integers. =back Examples: $foo = pack("WWWW",65,66,67,68); # foo eq "ABCD" $foo = pack("W4",65,66,67,68); # same thing $foo = pack("W4",0x24b6,0x24b7,0x24b8,0x24b9); # same thing with Unicode circled letters. $foo = pack("U4",0x24b6,0x24b7,0x24b8,0x24b9); # same thing with Unicode circled letters. You don't get the # UTF-8 bytes because the U at the start of the format caused # a switch to U0-mode, so the UTF-8 bytes get joined into # characters $foo = pack("C0U4",0x24b6,0x24b7,0x24b8,0x24b9); # foo eq "\xe2\x92\xb6\xe2\x92\xb7\xe2\x92\xb8\xe2\x92\xb9" # This is the UTF-8 encoding of the string in the # previous example $foo = pack("ccxxcc",65,66,67,68); # foo eq "AB\0\0CD" # NOTE: The examples above featuring "W" and "c" are true # only on ASCII and ASCII-derived systems such as ISO Latin 1 # and UTF-8. On EBCDIC systems, the first example would be # $foo = pack("WWWW",193,194,195,196); $foo = pack("s2",1,2); # "\001\000\002\000" on little-endian # "\000\001\000\002" on big-endian $foo = pack("a4","abcd","x","y","z"); # "abcd" $foo = pack("aaaa","abcd","x","y","z"); # "axyz" $foo = pack("a14","abcdefg"); # "abcdefg\0\0\0\0\0\0\0" $foo = pack("i9pl", gmtime); # a real struct tm (on my system anyway) $utmp_template = "Z8 Z8 Z16 L"; $utmp = pack($utmp_template, @utmp1); # a struct utmp (BSDish) @utmp2 = unpack($utmp_template, $utmp); # "@utmp1" eq "@utmp2" sub bintodec { unpack("N", pack("B32", substr("0" x 32 . shift, -32))); } $foo = pack('sx2l', 12, 34); # short 12, two zero bytes padding, long 34 $bar = pack('s@4l', 12, 34); # short 12, zero fill to position 4, long 34 # $foo eq $bar $baz = pack('s.l', 12, 4, 34); # short 12, zero fill to position 4, long 34 $foo = pack('nN', 42, 4711); # pack big-endian 16- and 32-bit unsigned integers $foo = pack('S>L>', 42, 4711); # exactly the same $foo = pack('s<l<', -42, 4711); # pack little-endian 16- and 32-bit signed integers $foo = pack('(sl)<', -42, 4711); # exactly the same The same template may generally also be used in L<C<unpack>|/unpack TEMPLATE,EXPR>. =item package NAMESPACE =item package NAMESPACE VERSION X<package> X<module> X<namespace> X<version> =item package NAMESPACE BLOCK =item package NAMESPACE VERSION BLOCK X<package> X<module> X<namespace> X<version> =for Pod::Functions declare a separate global namespace Declares the BLOCK or the rest of the compilation unit as being in the given namespace. The scope of the package declaration is either the supplied code BLOCK or, in the absence of a BLOCK, from the declaration itself through the end of current scope (the enclosing block, file, or L<C<eval>|/eval EXPR>). That is, the forms without a BLOCK are operative through the end of the current scope, just like the L<C<my>|/my VARLIST>, L<C<state>|/state VARLIST>, and L<C<our>|/our VARLIST> operators. All unqualified dynamic identifiers in this scope will be in the given namespace, except where overridden by another L<C<package>|/package NAMESPACE> declaration or when they're one of the special identifiers that qualify into C<main::>, like C<STDOUT>, C<ARGV>, C<ENV>, and the punctuation variables. A package statement affects dynamic variables only, including those you've used L<C<local>|/local EXPR> on, but I<not> lexically-scoped variables, which are created with L<C<my>|/my VARLIST>, L<C<state>|/state VARLIST>, or L<C<our>|/our VARLIST>. Typically it would be the first declaration in a file included by L<C<require>|/require VERSION> or L<C<use>|/use Module VERSION LIST>. You can switch into a package in more than one place, since this only determines which default symbol table the compiler uses for the rest of that block. You can refer to identifiers in other packages than the current one by prefixing the identifier with the package name and a double colon, as in C<$SomePack::var> or C<ThatPack::INPUT_HANDLE>. If package name is omitted, the C<main> package as assumed. That is, C<$::sail> is equivalent to C<$main::sail> (as well as to C<$main'sail>, still seen in ancient code, mostly from Perl 4). If VERSION is provided, L<C<package>|/package NAMESPACE> sets the C<$VERSION> variable in the given namespace to a L<version> object with the VERSION provided. VERSION must be a "strict" style version number as defined by the L<version> module: a positive decimal number (integer or decimal-fraction) without exponentiation or else a dotted-decimal v-string with a leading 'v' character and at least three components. You should set C<$VERSION> only once per package. See L<perlmod/"Packages"> for more information about packages, modules, and classes. See L<perlsub> for other scoping issues. =item __PACKAGE__ X<__PACKAGE__> =for Pod::Functions +5.004 the current package A special token that returns the name of the package in which it occurs. =item pipe READHANDLE,WRITEHANDLE X<pipe> =for Pod::Functions open a pair of connected filehandles Opens a pair of connected pipes like the corresponding system call. Note that if you set up a loop of piped processes, deadlock can occur unless you are very careful. In addition, note that Perl's pipes use IO buffering, so you may need to set L<C<$E<verbar>>|perlvar/$E<verbar>> to flush your WRITEHANDLE after each command, depending on the application. Returns true on success. See L<IPC::Open2>, L<IPC::Open3>, and L<perlipc/"Bidirectional Communication with Another Process"> for examples of such things. On systems that support a close-on-exec flag on files, that flag is set on all newly opened file descriptors whose L<C<fileno>|/fileno FILEHANDLE>s are I<higher> than the current value of L<C<$^F>|perlvar/$^F> (by default 2 for C<STDERR>). See L<perlvar/$^F>. =item pop ARRAY X<pop> X<stack> =item pop =for Pod::Functions remove the last element from an array and return it Pops and returns the last value of the array, shortening the array by one element. Returns the undefined value if the array is empty, although this may also happen at other times. If ARRAY is omitted, pops the L<C<@ARGV>|perlvar/@ARGV> array in the main program, but the L<C<@_>|perlvar/@_> array in subroutines, just like L<C<shift>|/shift ARRAY>. Starting with Perl 5.14, an experimental feature allowed L<C<pop>|/pop ARRAY> to take a scalar expression. This experiment has been deemed unsuccessful, and was removed as of Perl 5.24. =item pos SCALAR X<pos> X<match, position> =item pos =for Pod::Functions find or set the offset for the last/next m//g search Returns the offset of where the last C<m//g> search left off for the variable in question (L<C<$_>|perlvar/$_> is used when the variable is not specified). This offset is in characters unless the (no-longer-recommended) L<C<use bytes>|bytes> pragma is in effect, in which case the offset is in bytes. Note that 0 is a valid match offset. L<C<undef>|/undef EXPR> indicates that the search position is reset (usually due to match failure, but can also be because no match has yet been run on the scalar). L<C<pos>|/pos SCALAR> directly accesses the location used by the regexp engine to store the offset, so assigning to L<C<pos>|/pos SCALAR> will change that offset, and so will also influence the C<\G> zero-width assertion in regular expressions. Both of these effects take place for the next match, so you can't affect the position with L<C<pos>|/pos SCALAR> during the current match, such as in C<(?{pos() = 5})> or C<s//pos() = 5/e>. Setting L<C<pos>|/pos SCALAR> also resets the I<matched with zero-length> flag, described under L<perlre/"Repeated Patterns Matching a Zero-length Substring">. Because a failed C<m//gc> match doesn't reset the offset, the return from L<C<pos>|/pos SCALAR> won't change either in this case. See L<perlre> and L<perlop>. =item print FILEHANDLE LIST X<print> =item print FILEHANDLE =item print LIST =item print =for Pod::Functions output a list to a filehandle Prints a string or a list of strings. Returns true if successful. FILEHANDLE may be a scalar variable containing the name of or a reference to the filehandle, thus introducing one level of indirection. (NOTE: If FILEHANDLE is a variable and the next token is a term, it may be misinterpreted as an operator unless you interpose a C<+> or put parentheses around the arguments.) If FILEHANDLE is omitted, prints to the last selected (see L<C<select>|/select FILEHANDLE>) output handle. If LIST is omitted, prints L<C<$_>|perlvar/$_> to the currently selected output handle. To use FILEHANDLE alone to print the content of L<C<$_>|perlvar/$_> to it, you must use a bareword filehandle like C<FH>, not an indirect one like C<$fh>. To set the default output handle to something other than STDOUT, use the select operation. The current value of L<C<$,>|perlvar/$,> (if any) is printed between each LIST item. The current value of L<C<$\>|perlvar/$\> (if any) is printed after the entire LIST has been printed. Because print takes a LIST, anything in the LIST is evaluated in list context, including any subroutines whose return lists you pass to L<C<print>|/print FILEHANDLE LIST>. Be careful not to follow the print keyword with a left parenthesis unless you want the corresponding right parenthesis to terminate the arguments to the print; put parentheses around all arguments (or interpose a C<+>, but that doesn't look as good). If you're storing handles in an array or hash, or in general whenever you're using any expression more complex than a bareword handle or a plain, unsubscripted scalar variable to retrieve it, you will have to use a block returning the filehandle value instead, in which case the LIST may not be omitted: print { $files[$i] } "stuff\n"; print { $OK ? *STDOUT : *STDERR } "stuff\n"; Printing to a closed pipe or socket will generate a SIGPIPE signal. See L<perlipc> for more on signal handling. =item printf FILEHANDLE FORMAT, LIST X<printf> =item printf FILEHANDLE =item printf FORMAT, LIST =item printf =for Pod::Functions output a formatted list to a filehandle Equivalent to C<print FILEHANDLE sprintf(FORMAT, LIST)>, except that L<C<$\>|perlvar/$\> (the output record separator) is not appended. The FORMAT and the LIST are actually parsed as a single list. The first argument of the list will be interpreted as the L<C<printf>|/printf FILEHANDLE FORMAT, LIST> format. This means that C<printf(@_)> will use C<$_[0]> as the format. See L<sprintf|/sprintf FORMAT, LIST> for an explanation of the format argument. If C<use locale> (including C<use locale ':not_characters'>) is in effect and L<C<POSIX::setlocale>|POSIX/C<setlocale>> has been called, the character used for the decimal separator in formatted floating-point numbers is affected by the C<LC_NUMERIC> locale setting. See L<perllocale> and L<POSIX>. For historical reasons, if you omit the list, L<C<$_>|perlvar/$_> is used as the format; to use FILEHANDLE without a list, you must use a bareword filehandle like C<FH>, not an indirect one like C<$fh>. However, this will rarely do what you want; if L<C<$_>|perlvar/$_> contains formatting codes, they will be replaced with the empty string and a warning will be emitted if L<warnings> are enabled. Just use L<C<print>|/print FILEHANDLE LIST> if you want to print the contents of L<C<$_>|perlvar/$_>. Don't fall into the trap of using a L<C<printf>|/printf FILEHANDLE FORMAT, LIST> when a simple L<C<print>|/print FILEHANDLE LIST> would do. The L<C<print>|/print FILEHANDLE LIST> is more efficient and less error prone. =item prototype FUNCTION X<prototype> =item prototype =for Pod::Functions +5.002 get the prototype (if any) of a subroutine Returns the prototype of a function as a string (or L<C<undef>|/undef EXPR> if the function has no prototype). FUNCTION is a reference to, or the name of, the function whose prototype you want to retrieve. If FUNCTION is omitted, L<C<$_>|perlvar/$_> is used. If FUNCTION is a string starting with C<CORE::>, the rest is taken as a name for a Perl builtin. If the builtin's arguments cannot be adequately expressed by a prototype (such as L<C<system>|/system LIST>), L<C<prototype>|/prototype FUNCTION> returns L<C<undef>|/undef EXPR>, because the builtin does not really behave like a Perl function. Otherwise, the string describing the equivalent prototype is returned. =item push ARRAY,LIST X<push> X<stack> =for Pod::Functions append one or more elements to an array Treats ARRAY as a stack by appending the values of LIST to the end of ARRAY. The length of ARRAY increases by the length of LIST. Has the same effect as for my $value (LIST) { $ARRAY[++$#ARRAY] = $value; } but is more efficient. Returns the number of elements in the array following the completed L<C<push>|/push ARRAY,LIST>. Starting with Perl 5.14, an experimental feature allowed L<C<push>|/push ARRAY,LIST> to take a scalar expression. This experiment has been deemed unsuccessful, and was removed as of Perl 5.24. =item q/STRING/ =for Pod::Functions singly quote a string =item qq/STRING/ =for Pod::Functions doubly quote a string =item qw/STRING/ =for Pod::Functions quote a list of words =item qx/STRING/ =for Pod::Functions backquote quote a string Generalized quotes. See L<perlop/"Quote-Like Operators">. =item qr/STRING/ =for Pod::Functions +5.005 compile pattern Regexp-like quote. See L<perlop/"Regexp Quote-Like Operators">. =item quotemeta EXPR X<quotemeta> X<metacharacter> =item quotemeta =for Pod::Functions quote regular expression magic characters Returns the value of EXPR with all the ASCII non-"word" characters backslashed. (That is, all ASCII characters not matching C</[A-Za-z_0-9]/> will be preceded by a backslash in the returned string, regardless of any locale settings.) This is the internal function implementing the C<\Q> escape in double-quoted strings. (See below for the behavior on non-ASCII code points.) If EXPR is omitted, uses L<C<$_>|perlvar/$_>. quotemeta (and C<\Q> ... C<\E>) are useful when interpolating strings into regular expressions, because by default an interpolated variable will be considered a mini-regular expression. For example: my $sentence = 'The quick brown fox jumped over the lazy dog'; my $substring = 'quick.*?fox'; $sentence =~ s{$substring}{big bad wolf}; Will cause C<$sentence> to become C<'The big bad wolf jumped over...'>. On the other hand: my $sentence = 'The quick brown fox jumped over the lazy dog'; my $substring = 'quick.*?fox'; $sentence =~ s{\Q$substring\E}{big bad wolf}; Or: my $sentence = 'The quick brown fox jumped over the lazy dog'; my $substring = 'quick.*?fox'; my $quoted_substring = quotemeta($substring); $sentence =~ s{$quoted_substring}{big bad wolf}; Will both leave the sentence as is. Normally, when accepting literal string input from the user, L<C<quotemeta>|/quotemeta EXPR> or C<\Q> must be used. In Perl v5.14, all non-ASCII characters are quoted in non-UTF-8-encoded strings, but not quoted in UTF-8 strings. Starting in Perl v5.16, Perl adopted a Unicode-defined strategy for quoting non-ASCII characters; the quoting of ASCII characters is unchanged. Also unchanged is the quoting of non-UTF-8 strings when outside the scope of a L<C<use feature 'unicode_strings'>|feature/The 'unicode_strings' feature>, which is to quote all characters in the upper Latin1 range. This provides complete backwards compatibility for old programs which do not use Unicode. (Note that C<unicode_strings> is automatically enabled within the scope of a S<C<use v5.12>> or greater.) Within the scope of L<C<use locale>|locale>, all non-ASCII Latin1 code points are quoted whether the string is encoded as UTF-8 or not. As mentioned above, locale does not affect the quoting of ASCII-range characters. This protects against those locales where characters such as C<"|"> are considered to be word characters. Otherwise, Perl quotes non-ASCII characters using an adaptation from Unicode (see L<https://www.unicode.org/reports/tr31/>). The only code points that are quoted are those that have any of the Unicode properties: Pattern_Syntax, Pattern_White_Space, White_Space, Default_Ignorable_Code_Point, or General_Category=Control. Of these properties, the two important ones are Pattern_Syntax and Pattern_White_Space. They have been set up by Unicode for exactly this purpose of deciding which characters in a regular expression pattern should be quoted. No character that can be in an identifier has these properties. Perl promises, that if we ever add regular expression pattern metacharacters to the dozen already defined (C<\ E<verbar> ( ) [ { ^ $ * + ? .>), that we will only use ones that have the Pattern_Syntax property. Perl also promises, that if we ever add characters that are considered to be white space in regular expressions (currently mostly affected by C</x>), they will all have the Pattern_White_Space property. Unicode promises that the set of code points that have these two properties will never change, so something that is not quoted in v5.16 will never need to be quoted in any future Perl release. (Not all the code points that match Pattern_Syntax have actually had characters assigned to them; so there is room to grow, but they are quoted whether assigned or not. Perl, of course, would never use an unassigned code point as an actual metacharacter.) Quoting characters that have the other 3 properties is done to enhance the readability of the regular expression and not because they actually need to be quoted for regular expression purposes (characters with the White_Space property are likely to be indistinguishable on the page or screen from those with the Pattern_White_Space property; and the other two properties contain non-printing characters). =item rand EXPR X<rand> X<random> =item rand =for Pod::Functions retrieve the next pseudorandom number Returns a random fractional number greater than or equal to C<0> and less than the value of EXPR. (EXPR should be positive.) If EXPR is omitted, the value C<1> is used. Currently EXPR with the value C<0> is also special-cased as C<1> (this was undocumented before Perl 5.8.0 and is subject to change in future versions of Perl). Automatically calls L<C<srand>|/srand EXPR> unless L<C<srand>|/srand EXPR> has already been called. See also L<C<srand>|/srand EXPR>. Apply L<C<int>|/int EXPR> to the value returned by L<C<rand>|/rand EXPR> if you want random integers instead of random fractional numbers. For example, int(rand(10)) returns a random integer between C<0> and C<9>, inclusive. (Note: If your rand function consistently returns numbers that are too large or too small, then your version of Perl was probably compiled with the wrong number of RANDBITS.) B<L<C<rand>|/rand EXPR> is not cryptographically secure. You should not rely on it in security-sensitive situations.> As of this writing, a number of third-party CPAN modules offer random number generators intended by their authors to be cryptographically secure, including: L<Data::Entropy>, L<Crypt::Random>, L<Math::Random::Secure>, and L<Math::TrulyRandom>. =item read FILEHANDLE,SCALAR,LENGTH,OFFSET X<read> X<file, read> =item read FILEHANDLE,SCALAR,LENGTH =for Pod::Functions fixed-length buffered input from a filehandle Attempts to read LENGTH I<characters> of data into variable SCALAR from the specified FILEHANDLE. Returns the number of characters actually read, C<0> at end of file, or undef if there was an error (in the latter case L<C<$!>|perlvar/$!> is also set). SCALAR will be grown or shrunk so that the last character actually read is the last character of the scalar after the read. An OFFSET may be specified to place the read data at some place in the string other than the beginning. A negative OFFSET specifies placement at that many characters counting backwards from the end of the string. A positive OFFSET greater than the length of SCALAR results in the string being padded to the required size with C<"\0"> bytes before the result of the read is appended. The call is implemented in terms of either Perl's or your system's native L<fread(3)> library function, via the L<PerlIO> layers applied to the handle. To get a true L<read(2)> system call, see L<sysread|/sysread FILEHANDLE,SCALAR,LENGTH,OFFSET>. Note the I<characters>: depending on the status of the filehandle, either (8-bit) bytes or characters are read. By default, all filehandles operate on bytes, but for example if the filehandle has been opened with the C<:utf8> I/O layer (see L<C<open>|/open FILEHANDLE,MODE,EXPR>, and the L<open> pragma), the I/O will operate on UTF8-encoded Unicode characters, not bytes. Similarly for the C<:encoding> layer: in that case pretty much any characters can be read. =item readdir DIRHANDLE X<readdir> =for Pod::Functions get a directory from a directory handle Returns the next directory entry for a directory opened by L<C<opendir>|/opendir DIRHANDLE,EXPR>. If used in list context, returns all the rest of the entries in the directory. If there are no more entries, returns the undefined value in scalar context and the empty list in list context. If you're planning to filetest the return values out of a L<C<readdir>|/readdir DIRHANDLE>, you'd better prepend the directory in question. Otherwise, because we didn't L<C<chdir>|/chdir EXPR> there, it would have been testing the wrong file. opendir(my $dh, $some_dir) || die "Can't opendir $some_dir: $!"; my @dots = grep { /^\./ && -f "$some_dir/$_" } readdir($dh); closedir $dh; As of Perl 5.12 you can use a bare L<C<readdir>|/readdir DIRHANDLE> in a C<while> loop, which will set L<C<$_>|perlvar/$_> on every iteration. If either a C<readdir> expression or an explicit assignment of a C<readdir> expression to a scalar is used as a C<while>/C<for> condition, then the condition actually tests for definedness of the expression's value, not for its regular truth value. opendir(my $dh, $some_dir) || die "Can't open $some_dir: $!"; while (readdir $dh) { print "$some_dir/$_\n"; } closedir $dh; To avoid confusing would-be users of your code who are running earlier versions of Perl with mysterious failures, put this sort of thing at the top of your file to signal that your code will work I<only> on Perls of a recent vintage: use 5.012; # so readdir assigns to $_ in a lone while test =item readline EXPR =item readline X<readline> X<gets> X<fgets> =for Pod::Functions fetch a record from a file Reads from the filehandle whose typeglob is contained in EXPR (or from C<*ARGV> if EXPR is not provided). In scalar context, each call reads and returns the next line until end-of-file is reached, whereupon the subsequent call returns L<C<undef>|/undef EXPR>. In list context, reads until end-of-file is reached and returns a list of lines. Note that the notion of "line" used here is whatever you may have defined with L<C<$E<sol>>|perlvar/$E<sol>> (or C<$INPUT_RECORD_SEPARATOR> in L<English>). See L<perlvar/"$/">. When L<C<$E<sol>>|perlvar/$E<sol>> is set to L<C<undef>|/undef EXPR>, when L<C<readline>|/readline EXPR> is in scalar context (i.e., file slurp mode), and when an empty file is read, it returns C<''> the first time, followed by L<C<undef>|/undef EXPR> subsequently. This is the internal function implementing the C<< <EXPR> >> operator, but you can use it directly. The C<< <EXPR> >> operator is discussed in more detail in L<perlop/"I/O Operators">. my $line = <STDIN>; my $line = readline(STDIN); # same thing If L<C<readline>|/readline EXPR> encounters an operating system error, L<C<$!>|perlvar/$!> will be set with the corresponding error message. It can be helpful to check L<C<$!>|perlvar/$!> when you are reading from filehandles you don't trust, such as a tty or a socket. The following example uses the operator form of L<C<readline>|/readline EXPR> and dies if the result is not defined. while ( ! eof($fh) ) { defined( $_ = readline $fh ) or die "readline failed: $!"; ... } Note that you have can't handle L<C<readline>|/readline EXPR> errors that way with the C<ARGV> filehandle. In that case, you have to open each element of L<C<@ARGV>|perlvar/@ARGV> yourself since L<C<eof>|/eof FILEHANDLE> handles C<ARGV> differently. foreach my $arg (@ARGV) { open(my $fh, $arg) or warn "Can't open $arg: $!"; while ( ! eof($fh) ) { defined( $_ = readline $fh ) or die "readline failed for $arg: $!"; ... } } Like the C<< <EXPR> >> operator, if a C<readline> expression is used as the condition of a C<while> or C<for> loop, then it will be implicitly assigned to C<$_>. If either a C<readline> expression or an explicit assignment of a C<readline> expression to a scalar is used as a C<while>/C<for> condition, then the condition actually tests for definedness of the expression's value, not for its regular truth value. =item readlink EXPR X<readlink> =item readlink =for Pod::Functions determine where a symbolic link is pointing Returns the value of a symbolic link, if symbolic links are implemented. If not, raises an exception. If there is a system error, returns the undefined value and sets L<C<$!>|perlvar/$!> (errno). If EXPR is omitted, uses L<C<$_>|perlvar/$_>. Portability issues: L<perlport/readlink>. =item readpipe EXPR =item readpipe X<readpipe> =for Pod::Functions execute a system command and collect standard output EXPR is executed as a system command. The collected standard output of the command is returned. In scalar context, it comes back as a single (potentially multi-line) string. In list context, returns a list of lines (however you've defined lines with L<C<$E<sol>>|perlvar/$E<sol>> (or C<$INPUT_RECORD_SEPARATOR> in L<English>)). This is the internal function implementing the C<qx/EXPR/> operator, but you can use it directly. The C<qx/EXPR/> operator is discussed in more detail in L<perlop/"C<qx/I<STRING>/>">. If EXPR is omitted, uses L<C<$_>|perlvar/$_>. =item recv SOCKET,SCALAR,LENGTH,FLAGS X<recv> =for Pod::Functions receive a message over a Socket Receives a message on a socket. Attempts to receive LENGTH characters of data into variable SCALAR from the specified SOCKET filehandle. SCALAR will be grown or shrunk to the length actually read. Takes the same flags as the system call of the same name. Returns the address of the sender if SOCKET's protocol supports this; returns an empty string otherwise. If there's an error, returns the undefined value. This call is actually implemented in terms of the L<recvfrom(2)> system call. See L<perlipc/"UDP: Message Passing"> for examples. Note that if the socket has been marked as C<:utf8>, C<recv> will throw an exception. The C<:encoding(...)> layer implicitly introduces the C<:utf8> layer. See L<C<binmode>|/binmode FILEHANDLE, LAYER>. =item redo LABEL X<redo> =item redo EXPR =item redo =for Pod::Functions start this loop iteration over again The L<C<redo>|/redo LABEL> command restarts the loop block without evaluating the conditional again. The L<C<continue>|/continue BLOCK> block, if any, is not executed. If the LABEL is omitted, the command refers to the innermost enclosing loop. The C<redo EXPR> form, available starting in Perl 5.18.0, allows a label name to be computed at run time, and is otherwise identical to C<redo LABEL>. Programs that want to lie to themselves about what was just input normally use this command: # a simpleminded Pascal comment stripper # (warning: assumes no { or } in strings) LINE: while (<STDIN>) { while (s|({.*}.*){.*}|$1 |) {} s|{.*}| |; if (s|{.*| |) { my $front = $_; while (<STDIN>) { if (/}/) { # end of comment? s|^|$front\{|; redo LINE; } } } print; } L<C<redo>|/redo LABEL> cannot return a value from a block that typically returns a value, such as C<eval {}>, C<sub {}>, or C<do {}>. It will perform its flow control behavior, which precludes any return value. It should not be used to exit a L<C<grep>|/grep BLOCK LIST> or L<C<map>|/map BLOCK LIST> operation. Note that a block by itself is semantically identical to a loop that executes once. Thus L<C<redo>|/redo LABEL> inside such a block will effectively turn it into a looping construct. See also L<C<continue>|/continue BLOCK> for an illustration of how L<C<last>|/last LABEL>, L<C<next>|/next LABEL>, and L<C<redo>|/redo LABEL> work. Unlike most named operators, this has the same precedence as assignment. It is also exempt from the looks-like-a-function rule, so C<redo ("foo")."bar"> will cause "bar" to be part of the argument to L<C<redo>|/redo LABEL>. =item ref EXPR X<ref> X<reference> =item ref =for Pod::Functions find out the type of thing being referenced Examines the value of EXPR, expecting it to be a reference, and returns a string giving information about the reference and the type of referent. If EXPR is not specified, L<C<$_>|perlvar/$_> will be used. If the operand is not a reference, then the empty string will be returned. An empty string will only be returned in this situation. C<ref> is often useful to just test whether a value is a reference, which can be done by comparing the result to the empty string. It is a common mistake to use the result of C<ref> directly as a truth value: this goes wrong because C<0> (which is false) can be returned for a reference. If the operand is a reference to a blessed object, then the name of the class into which the referent is blessed will be returned. C<ref> doesn't care what the physical type of the referent is; blessing takes precedence over such concerns. Beware that exact comparison of C<ref> results against a class name doesn't perform a class membership test: a class's members also include objects blessed into subclasses, for which C<ref> will return the name of the subclass. Also beware that class names can clash with the built-in type names (described below). If the operand is a reference to an unblessed object, then the return value indicates the type of object. If the unblessed referent is not a scalar, then the return value will be one of the strings C<ARRAY>, C<HASH>, C<CODE>, C<FORMAT>, or C<IO>, indicating only which kind of object it is. If the unblessed referent is a scalar, then the return value will be one of the strings C<SCALAR>, C<VSTRING>, C<REF>, C<GLOB>, C<LVALUE>, or C<REGEXP>, depending on the kind of value the scalar currently has. But note that C<qr//> scalars are created already blessed, so C<ref qr/.../> will likely return C<Regexp>. Beware that these built-in type names can also be used as class names, so C<ref> returning one of these names doesn't unambiguously indicate that the referent is of the kind to which the name refers. The ambiguity between built-in type names and class names significantly limits the utility of C<ref>. For unambiguous information, use L<C<Scalar::Util::blessed()>|Scalar::Util/blessed> for information about blessing, and L<C<Scalar::Util::reftype()>|Scalar::Util/reftype> for information about physical types. Use L<the C<isa> method|UNIVERSAL/C<< $obj->isa( TYPE ) >>> for class membership tests, though one must be sure of blessedness before attempting a method call. See also L<perlref> and L<perlobj>. =item rename OLDNAME,NEWNAME X<rename> X<move> X<mv> X<ren> =for Pod::Functions change a filename Changes the name of a file; an existing file NEWNAME will be clobbered. Returns true for success, false otherwise. Behavior of this function varies wildly depending on your system implementation. For example, it will usually not work across file system boundaries, even though the system I<mv> command sometimes compensates for this. Other restrictions include whether it works on directories, open files, or pre-existing files. Check L<perlport> and either the L<rename(2)> manpage or equivalent system documentation for details. For a platform independent L<C<move>|File::Copy/move> function look at the L<File::Copy> module. Portability issues: L<perlport/rename>. =item require VERSION X<require> =item require EXPR =item require =for Pod::Functions load in external functions from a library at runtime Demands a version of Perl specified by VERSION, or demands some semantics specified by EXPR or by L<C<$_>|perlvar/$_> if EXPR is not supplied. VERSION may be either a literal such as v5.24.1, which will be compared to L<C<$^V>|perlvar/$^V> (or C<$PERL_VERSION> in L<English>), or a numeric argument of the form 5.024001, which will be compared to L<C<$]>|perlvar/$]>. An exception is raised if VERSION is greater than the version of the current Perl interpreter. Compare with L<C<use>|/use Module VERSION LIST>, which can do a similar check at compile time. Specifying VERSION as a numeric argument of the form 5.024001 should generally be avoided as older less readable syntax compared to v5.24.1. Before perl 5.8.0 (released in 2002), the more verbose numeric form was the only supported syntax, which is why you might see it in older code. require v5.24.1; # run time version check require 5.24.1; # ditto require 5.024_001; # ditto; older syntax compatible with perl 5.6 Otherwise, L<C<require>|/require VERSION> demands that a library file be included if it hasn't already been included. The file is included via the do-FILE mechanism, which is essentially just a variety of L<C<eval>|/eval EXPR> with the caveat that lexical variables in the invoking script will be invisible to the included code. If it were implemented in pure Perl, it would have semantics similar to the following: use Carp 'croak'; use version; sub require { my ($filename) = @_; if ( my $version = eval { version->parse($filename) } ) { if ( $version > $^V ) { my $vn = $version->normal; croak "Perl $vn required--this is only $^V, stopped"; } return 1; } if (exists $INC{$filename}) { return 1 if $INC{$filename}; croak "Compilation failed in require"; } foreach $prefix (@INC) { if (ref($prefix)) { #... do other stuff - see text below .... } # (see text below about possible appending of .pmc # suffix to $filename) my $realfilename = "$prefix/$filename"; next if ! -e $realfilename || -d _ || -b _; $INC{$filename} = $realfilename; my $result = do($realfilename); # but run in caller's namespace if (!defined $result) { $INC{$filename} = undef; croak $@ ? "$@Compilation failed in require" : "Can't locate $filename: $!\n"; } if (!$result) { delete $INC{$filename}; croak "$filename did not return true value"; } $! = 0; return $result; } croak "Can't locate $filename in \@INC ..."; } Note that the file will not be included twice under the same specified name. The file must return true as the last statement to indicate successful execution of any initialization code, so it's customary to end such a file with C<1;> unless you're sure it'll return true otherwise. But it's better just to put the C<1;>, in case you add more statements. If EXPR is a bareword, L<C<require>|/require VERSION> assumes a F<.pm> extension and replaces C<::> with C</> in the filename for you, to make it easy to load standard modules. This form of loading of modules does not risk altering your namespace, however it will autovivify the stash for the required module. In other words, if you try this: require Foo::Bar; # a splendid bareword The require function will actually look for the F<Foo/Bar.pm> file in the directories specified in the L<C<@INC>|perlvar/@INC> array, and it will autovivify the C<Foo::Bar::> stash at compile time. But if you try this: my $class = 'Foo::Bar'; require $class; # $class is not a bareword #or require "Foo::Bar"; # not a bareword because of the "" The require function will look for the F<Foo::Bar> file in the L<C<@INC>|perlvar/@INC> array and will complain about not finding F<Foo::Bar> there. In this case you can do: eval "require $class"; or you could do require "Foo/Bar.pm"; Neither of these forms will autovivify any stashes at compile time and only have run time effects. Now that you understand how L<C<require>|/require VERSION> looks for files with a bareword argument, there is a little extra functionality going on behind the scenes. Before L<C<require>|/require VERSION> looks for a F<.pm> extension, it will first look for a similar filename with a F<.pmc> extension. If this file is found, it will be loaded in place of any file ending in a F<.pm> extension. This applies to both the explicit C<require "Foo/Bar.pm";> form and the C<require Foo::Bar;> form. You can also insert hooks into the import facility by putting Perl code directly into the L<C<@INC>|perlvar/@INC> array. There are three forms of hooks: subroutine references, array references, and blessed objects. Subroutine references are the simplest case. When the inclusion system walks through L<C<@INC>|perlvar/@INC> and encounters a subroutine, this subroutine gets called with two parameters, the first a reference to itself, and the second the name of the file to be included (e.g., F<Foo/Bar.pm>). The subroutine should return either nothing or else a list of up to four values in the following order: =over =item 1 A reference to a scalar, containing any initial source code to prepend to the file or generator output. =item 2 A filehandle, from which the file will be read. =item 3 A reference to a subroutine. If there is no filehandle (previous item), then this subroutine is expected to generate one line of source code per call, writing the line into L<C<$_>|perlvar/$_> and returning 1, then finally at end of file returning 0. If there is a filehandle, then the subroutine will be called to act as a simple source filter, with the line as read in L<C<$_>|perlvar/$_>. Again, return 1 for each valid line, and 0 after all lines have been returned. For historical reasons the subroutine will receive a meaningless argument (in fact always the numeric value zero) as C<$_[0]>. =item 4 Optional state for the subroutine. The state is passed in as C<$_[1]>. =back If an empty list, L<C<undef>|/undef EXPR>, or nothing that matches the first 3 values above is returned, then L<C<require>|/require VERSION> looks at the remaining elements of L<C<@INC>|perlvar/@INC>. Note that this filehandle must be a real filehandle (strictly a typeglob or reference to a typeglob, whether blessed or unblessed); tied filehandles will be ignored and processing will stop there. If the hook is an array reference, its first element must be a subroutine reference. This subroutine is called as above, but the first parameter is the array reference. This lets you indirectly pass arguments to the subroutine. In other words, you can write: push @INC, \&my_sub; sub my_sub { my ($coderef, $filename) = @_; # $coderef is \&my_sub ... } or: push @INC, [ \&my_sub, $x, $y, ... ]; sub my_sub { my ($arrayref, $filename) = @_; # Retrieve $x, $y, ... my (undef, @parameters) = @$arrayref; ... } If the hook is an object, it must provide an C<INC> method that will be called as above, the first parameter being the object itself. (Note that you must fully qualify the sub's name, as unqualified C<INC> is always forced into package C<main>.) Here is a typical code layout: # In Foo.pm package Foo; sub new { ... } sub Foo::INC { my ($self, $filename) = @_; ... } # In the main program push @INC, Foo->new(...); These hooks are also permitted to set the L<C<%INC>|perlvar/%INC> entry corresponding to the files they have loaded. See L<perlvar/%INC>. For a yet-more-powerful import facility, see L<C<use>|/use Module VERSION LIST> and L<perlmod>. =item reset EXPR X<reset> =item reset =for Pod::Functions clear all variables of a given name Generally used in a L<C<continue>|/continue BLOCK> block at the end of a loop to clear variables and reset C<m?pattern?> searches so that they work again. The expression is interpreted as a list of single characters (hyphens allowed for ranges). All variables (scalars, arrays, and hashes) in the current package beginning with one of those letters are reset to their pristine state. If the expression is omitted, one-match searches (C<m?pattern?>) are reset to match again. Only resets variables or searches in the current package. Always returns 1. Examples: reset 'X'; # reset all X variables reset 'a-z'; # reset lower case variables reset; # just reset m?one-time? searches Resetting C<"A-Z"> is not recommended because you'll wipe out your L<C<@ARGV>|perlvar/@ARGV> and L<C<@INC>|perlvar/@INC> arrays and your L<C<%ENV>|perlvar/%ENV> hash. Resets only package variables; lexical variables are unaffected, but they clean themselves up on scope exit anyway, so you'll probably want to use them instead. See L<C<my>|/my VARLIST>. =item return EXPR X<return> =item return =for Pod::Functions get out of a function early Returns from a subroutine, L<C<eval>|/eval EXPR>, L<C<do FILE>|/do EXPR>, L<C<sort>|/sort SUBNAME LIST> block or regex eval block (but not a L<C<grep>|/grep BLOCK LIST>, L<C<map>|/map BLOCK LIST>, or L<C<do BLOCK>|/do BLOCK> block) with the value given in EXPR. Evaluation of EXPR may be in list, scalar, or void context, depending on how the return value will be used, and the context may vary from one execution to the next (see L<C<wantarray>|/wantarray>). If no EXPR is given, returns an empty list in list context, the undefined value in scalar context, and (of course) nothing at all in void context. (In the absence of an explicit L<C<return>|/return EXPR>, a subroutine, L<C<eval>|/eval EXPR>, or L<C<do FILE>|/do EXPR> automatically returns the value of the last expression evaluated.) Unlike most named operators, this is also exempt from the looks-like-a-function rule, so C<return ("foo")."bar"> will cause C<"bar"> to be part of the argument to L<C<return>|/return EXPR>. =item reverse LIST X<reverse> X<rev> X<invert> =for Pod::Functions flip a string or a list In list context, returns a list value consisting of the elements of LIST in the opposite order. In scalar context, concatenates the elements of LIST and returns a string value with all characters in the opposite order. print join(", ", reverse "world", "Hello"); # Hello, world print scalar reverse "dlrow ,", "olleH"; # Hello, world Used without arguments in scalar context, L<C<reverse>|/reverse LIST> reverses L<C<$_>|perlvar/$_>. $_ = "dlrow ,olleH"; print reverse; # No output, list context print scalar reverse; # Hello, world Note that reversing an array to itself (as in C<@a = reverse @a>) will preserve non-existent elements whenever possible; i.e., for non-magical arrays or for tied arrays with C<EXISTS> and C<DELETE> methods. This operator is also handy for inverting a hash, although there are some caveats. If a value is duplicated in the original hash, only one of those can be represented as a key in the inverted hash. Also, this has to unwind one hash and build a whole new one, which may take some time on a large hash, such as from a DBM file. my %by_name = reverse %by_address; # Invert the hash =item rewinddir DIRHANDLE X<rewinddir> =for Pod::Functions reset directory handle Sets the current position to the beginning of the directory for the L<C<readdir>|/readdir DIRHANDLE> routine on DIRHANDLE. Portability issues: L<perlport/rewinddir>. =item rindex STR,SUBSTR,POSITION X<rindex> =item rindex STR,SUBSTR =for Pod::Functions right-to-left substring search Works just like L<C<index>|/index STR,SUBSTR,POSITION> except that it returns the position of the I<last> occurrence of SUBSTR in STR. If POSITION is specified, returns the last occurrence beginning at or before that position. =item rmdir FILENAME X<rmdir> X<rd> X<directory, remove> =item rmdir =for Pod::Functions remove a directory Deletes the directory specified by FILENAME if that directory is empty. If it succeeds it returns true; otherwise it returns false and sets L<C<$!>|perlvar/$!> (errno). If FILENAME is omitted, uses L<C<$_>|perlvar/$_>. To remove a directory tree recursively (C<rm -rf> on Unix) look at the L<C<rmtree>|File::Path/rmtree( $dir )> function of the L<File::Path> module. =item s/// =for Pod::Functions replace a pattern with a string The substitution operator. See L<perlop/"Regexp Quote-Like Operators">. =item say FILEHANDLE LIST X<say> =item say FILEHANDLE =item say LIST =item say =for Pod::Functions +say output a list to a filehandle, appending a newline Just like L<C<print>|/print FILEHANDLE LIST>, but implicitly appends a newline at the end of the LIST instead of any value L<C<$\>|perlvar/$\> might have. To use FILEHANDLE without a LIST to print the contents of L<C<$_>|perlvar/$_> to it, you must use a bareword filehandle like C<FH>, not an indirect one like C<$fh>. L<C<say>|/say FILEHANDLE LIST> is available only if the L<C<"say"> feature|feature/The 'say' feature> is enabled or if it is prefixed with C<CORE::>. The L<C<"say"> feature|feature/The 'say' feature> is enabled automatically with a C<use v5.10> (or higher) declaration in the current scope. =item scalar EXPR X<scalar> X<context> =for Pod::Functions force a scalar context Forces EXPR to be interpreted in scalar context and returns the value of EXPR. my @counts = ( scalar @a, scalar @b, scalar @c ); There is no equivalent operator to force an expression to be interpolated in list context because in practice, this is never needed. If you really wanted to do so, however, you could use the construction C<@{[ (some expression) ]}>, but usually a simple C<(some expression)> suffices. Because L<C<scalar>|/scalar EXPR> is a unary operator, if you accidentally use a parenthesized list for the EXPR, this behaves as a scalar comma expression, evaluating all but the last element in void context and returning the final element evaluated in scalar context. This is seldom what you want. The following single statement: print uc(scalar(foo(), $bar)), $baz; is the moral equivalent of these two: foo(); print(uc($bar), $baz); See L<perlop> for more details on unary operators and the comma operator, and L<perldata> for details on evaluating a hash in scalar contex. =item seek FILEHANDLE,POSITION,WHENCE X<seek> X<fseek> X<filehandle, position> =for Pod::Functions reposition file pointer for random-access I/O Sets FILEHANDLE's position, just like the L<fseek(3)> call of C C<stdio>. FILEHANDLE may be an expression whose value gives the name of the filehandle. The values for WHENCE are C<0> to set the new position I<in bytes> to POSITION; C<1> to set it to the current position plus POSITION; and C<2> to set it to EOF plus POSITION, typically negative. For WHENCE you may use the constants C<SEEK_SET>, C<SEEK_CUR>, and C<SEEK_END> (start of the file, current position, end of the file) from the L<Fcntl> module. Returns C<1> on success, false otherwise. Note the emphasis on bytes: even if the filehandle has been set to operate on characters (for example using the C<:encoding(UTF-8)> I/O layer), the L<C<seek>|/seek FILEHANDLE,POSITION,WHENCE>, L<C<tell>|/tell FILEHANDLE>, and L<C<sysseek>|/sysseek FILEHANDLE,POSITION,WHENCE> family of functions use byte offsets, not character offsets, because seeking to a character offset would be very slow in a UTF-8 file. If you want to position the file for L<C<sysread>|/sysread FILEHANDLE,SCALAR,LENGTH,OFFSET> or L<C<syswrite>|/syswrite FILEHANDLE,SCALAR,LENGTH,OFFSET>, don't use L<C<seek>|/seek FILEHANDLE,POSITION,WHENCE>, because buffering makes its effect on the file's read-write position unpredictable and non-portable. Use L<C<sysseek>|/sysseek FILEHANDLE,POSITION,WHENCE> instead. Due to the rules and rigors of ANSI C, on some systems you have to do a seek whenever you switch between reading and writing. Amongst other things, this may have the effect of calling stdio's L<clearerr(3)>. A WHENCE of C<1> (C<SEEK_CUR>) is useful for not moving the file position: seek($fh, 0, 1); This is also useful for applications emulating C<tail -f>. Once you hit EOF on your read and then sleep for a while, you (probably) have to stick in a dummy L<C<seek>|/seek FILEHANDLE,POSITION,WHENCE> to reset things. The L<C<seek>|/seek FILEHANDLE,POSITION,WHENCE> doesn't change the position, but it I<does> clear the end-of-file condition on the handle, so that the next C<readline FILE> makes Perl try again to read something. (We hope.) If that doesn't work (some I/O implementations are particularly cantankerous), you might need something like this: for (;;) { for ($curpos = tell($fh); $_ = readline($fh); $curpos = tell($fh)) { # search for some stuff and put it into files } sleep($for_a_while); seek($fh, $curpos, 0); } =item seekdir DIRHANDLE,POS X<seekdir> =for Pod::Functions reposition directory pointer Sets the current position for the L<C<readdir>|/readdir DIRHANDLE> routine on DIRHANDLE. POS must be a value returned by L<C<telldir>|/telldir DIRHANDLE>. L<C<seekdir>|/seekdir DIRHANDLE,POS> also has the same caveats about possible directory compaction as the corresponding system library routine. =item select FILEHANDLE X<select> X<filehandle, default> =item select =for Pod::Functions reset default output or do I/O multiplexing Returns the currently selected filehandle. If FILEHANDLE is supplied, sets the new current default filehandle for output. This has two effects: first, a L<C<write>|/write FILEHANDLE> or a L<C<print>|/print FILEHANDLE LIST> without a filehandle default to this FILEHANDLE. Second, references to variables related to output will refer to this output channel. For example, to set the top-of-form format for more than one output channel, you might do the following: select(REPORT1); $^ = 'report1_top'; select(REPORT2); $^ = 'report2_top'; FILEHANDLE may be an expression whose value gives the name of the actual filehandle. Thus: my $oldfh = select(STDERR); $| = 1; select($oldfh); Some programmers may prefer to think of filehandles as objects with methods, preferring to write the last example as: STDERR->autoflush(1); (Prior to Perl version 5.14, you have to C<use IO::Handle;> explicitly first.) Portability issues: L<perlport/select>. =item select RBITS,WBITS,EBITS,TIMEOUT X<select> This calls the L<select(2)> syscall with the bit masks specified, which can be constructed using L<C<fileno>|/fileno FILEHANDLE> and L<C<vec>|/vec EXPR,OFFSET,BITS>, along these lines: my $rin = my $win = my $ein = ''; vec($rin, fileno(STDIN), 1) = 1; vec($win, fileno(STDOUT), 1) = 1; $ein = $rin | $win; If you want to select on many filehandles, you may wish to write a subroutine like this: sub fhbits { my @fhlist = @_; my $bits = ""; for my $fh (@fhlist) { vec($bits, fileno($fh), 1) = 1; } return $bits; } my $rin = fhbits(\*STDIN, $tty, $mysock); The usual idiom is: my ($nfound, $timeleft) = select(my $rout = $rin, my $wout = $win, my $eout = $ein, $timeout); or to block until something becomes ready just do this my $nfound = select(my $rout = $rin, my $wout = $win, my $eout = $ein, undef); Most systems do not bother to return anything useful in C<$timeleft>, so calling L<C<select>|/select RBITS,WBITS,EBITS,TIMEOUT> in scalar context just returns C<$nfound>. Any of the bit masks can also be L<C<undef>|/undef EXPR>. The timeout, if specified, is in seconds, which may be fractional. Note: not all implementations are capable of returning the C<$timeleft>. If not, they always return C<$timeleft> equal to the supplied C<$timeout>. You can effect a sleep of 250 milliseconds this way: select(undef, undef, undef, 0.25); Note that whether L<C<select>|/select RBITS,WBITS,EBITS,TIMEOUT> gets restarted after signals (say, SIGALRM) is implementation-dependent. See also L<perlport> for notes on the portability of L<C<select>|/select RBITS,WBITS,EBITS,TIMEOUT>. On error, L<C<select>|/select RBITS,WBITS,EBITS,TIMEOUT> behaves just like L<select(2)>: it returns C<-1> and sets L<C<$!>|perlvar/$!>. On some Unixes, L<select(2)> may report a socket file descriptor as "ready for reading" even when no data is available, and thus any subsequent L<C<read>|/read FILEHANDLE,SCALAR,LENGTH,OFFSET> would block. This can be avoided if you always use C<O_NONBLOCK> on the socket. See L<select(2)> and L<fcntl(2)> for further details. The standard L<C<IO::Select>|IO::Select> module provides a user-friendlier interface to L<C<select>|/select RBITS,WBITS,EBITS,TIMEOUT>, mostly because it does all the bit-mask work for you. B<WARNING>: One should not attempt to mix buffered I/O (like L<C<read>|/read FILEHANDLE,SCALAR,LENGTH,OFFSET> or L<C<readline>|/readline EXPR>) with L<C<select>|/select RBITS,WBITS,EBITS,TIMEOUT>, except as permitted by POSIX, and even then only on POSIX systems. You have to use L<C<sysread>|/sysread FILEHANDLE,SCALAR,LENGTH,OFFSET> instead. Portability issues: L<perlport/select>. =item semctl ID,SEMNUM,CMD,ARG X<semctl> =for Pod::Functions SysV semaphore control operations Calls the System V IPC function L<semctl(2)>. You'll probably have to say use IPC::SysV; first to get the correct constant definitions. If CMD is IPC_STAT or GETALL, then ARG must be a variable that will hold the returned semid_ds structure or semaphore value array. Returns like L<C<ioctl>|/ioctl FILEHANDLE,FUNCTION,SCALAR>: the undefined value for error, "C<0 but true>" for zero, or the actual return value otherwise. The ARG must consist of a vector of native short integers, which may be created with C<pack("s!",(0)x$nsem)>. See also L<perlipc/"SysV IPC"> and the documentation for L<C<IPC::SysV>|IPC::SysV> and L<C<IPC::Semaphore>|IPC::Semaphore>. Portability issues: L<perlport/semctl>. =item semget KEY,NSEMS,FLAGS X<semget> =for Pod::Functions get set of SysV semaphores Calls the System V IPC function L<semget(2)>. Returns the semaphore id, or the undefined value on error. See also L<perlipc/"SysV IPC"> and the documentation for L<C<IPC::SysV>|IPC::SysV> and L<C<IPC::Semaphore>|IPC::Semaphore>. Portability issues: L<perlport/semget>. =item semop KEY,OPSTRING X<semop> =for Pod::Functions SysV semaphore operations Calls the System V IPC function L<semop(2)> for semaphore operations such as signalling and waiting. OPSTRING must be a packed array of semop structures. Each semop structure can be generated with C<pack("s!3", $semnum, $semop, $semflag)>. The length of OPSTRING implies the number of semaphore operations. Returns true if successful, false on error. As an example, the following code waits on semaphore $semnum of semaphore id $semid: my $semop = pack("s!3", $semnum, -1, 0); die "Semaphore trouble: $!\n" unless semop($semid, $semop); To signal the semaphore, replace C<-1> with C<1>. See also L<perlipc/"SysV IPC"> and the documentation for L<C<IPC::SysV>|IPC::SysV> and L<C<IPC::Semaphore>|IPC::Semaphore>. Portability issues: L<perlport/semop>. =item send SOCKET,MSG,FLAGS,TO X<send> =item send SOCKET,MSG,FLAGS =for Pod::Functions send a message over a socket Sends a message on a socket. Attempts to send the scalar MSG to the SOCKET filehandle. Takes the same flags as the system call of the same name. On unconnected sockets, you must specify a destination to I<send to>, in which case it does a L<sendto(2)> syscall. Returns the number of characters sent, or the undefined value on error. The L<sendmsg(2)> syscall is currently unimplemented. See L<perlipc/"UDP: Message Passing"> for examples. Note that if the socket has been marked as C<:utf8>, C<send> will throw an exception. The C<:encoding(...)> layer implicitly introduces the C<:utf8> layer. See L<C<binmode>|/binmode FILEHANDLE, LAYER>. =item setpgrp PID,PGRP X<setpgrp> X<group> =for Pod::Functions set the process group of a process Sets the current process group for the specified PID, C<0> for the current process. Raises an exception when used on a machine that doesn't implement POSIX L<setpgid(2)> or BSD L<setpgrp(2)>. If the arguments are omitted, it defaults to C<0,0>. Note that the BSD 4.2 version of L<C<setpgrp>|/setpgrp PID,PGRP> does not accept any arguments, so only C<setpgrp(0,0)> is portable. See also L<C<POSIX::setsid()>|POSIX/C<setsid>>. Portability issues: L<perlport/setpgrp>. =item setpriority WHICH,WHO,PRIORITY X<setpriority> X<priority> X<nice> X<renice> =for Pod::Functions set a process's nice value Sets the current priority for a process, a process group, or a user. (See L<setpriority(2)>.) Raises an exception when used on a machine that doesn't implement L<setpriority(2)>. C<WHICH> can be any of C<PRIO_PROCESS>, C<PRIO_PGRP> or C<PRIO_USER> imported from L<POSIX/RESOURCE CONSTANTS>. Portability issues: L<perlport/setpriority>. =item setsockopt SOCKET,LEVEL,OPTNAME,OPTVAL X<setsockopt> =for Pod::Functions set some socket options Sets the socket option requested. Returns L<C<undef>|/undef EXPR> on error. Use integer constants provided by the L<C<Socket>|Socket> module for LEVEL and OPNAME. Values for LEVEL can also be obtained from getprotobyname. OPTVAL might either be a packed string or an integer. An integer OPTVAL is shorthand for pack("i", OPTVAL). An example disabling Nagle's algorithm on a socket: use Socket qw(IPPROTO_TCP TCP_NODELAY); setsockopt($socket, IPPROTO_TCP, TCP_NODELAY, 1); Portability issues: L<perlport/setsockopt>. =item shift ARRAY X<shift> =item shift =for Pod::Functions remove the first element of an array, and return it Shifts the first value of the array off and returns it, shortening the array by 1 and moving everything down. If there are no elements in the array, returns the undefined value. If ARRAY is omitted, shifts the L<C<@_>|perlvar/@_> array within the lexical scope of subroutines and formats, and the L<C<@ARGV>|perlvar/@ARGV> array outside a subroutine and also within the lexical scopes established by the C<eval STRING>, C<BEGIN {}>, C<INIT {}>, C<CHECK {}>, C<UNITCHECK {}>, and C<END {}> constructs. Starting with Perl 5.14, an experimental feature allowed L<C<shift>|/shift ARRAY> to take a scalar expression. This experiment has been deemed unsuccessful, and was removed as of Perl 5.24. See also L<C<unshift>|/unshift ARRAY,LIST>, L<C<push>|/push ARRAY,LIST>, and L<C<pop>|/pop ARRAY>. L<C<shift>|/shift ARRAY> and L<C<unshift>|/unshift ARRAY,LIST> do the same thing to the left end of an array that L<C<pop>|/pop ARRAY> and L<C<push>|/push ARRAY,LIST> do to the right end. =item shmctl ID,CMD,ARG X<shmctl> =for Pod::Functions SysV shared memory operations Calls the System V IPC function shmctl. You'll probably have to say use IPC::SysV; first to get the correct constant definitions. If CMD is C<IPC_STAT>, then ARG must be a variable that will hold the returned C<shmid_ds> structure. Returns like ioctl: L<C<undef>|/undef EXPR> for error; "C<0> but true" for zero; and the actual return value otherwise. See also L<perlipc/"SysV IPC"> and the documentation for L<C<IPC::SysV>|IPC::SysV>. Portability issues: L<perlport/shmctl>. =item shmget KEY,SIZE,FLAGS X<shmget> =for Pod::Functions get SysV shared memory segment identifier Calls the System V IPC function shmget. Returns the shared memory segment id, or L<C<undef>|/undef EXPR> on error. See also L<perlipc/"SysV IPC"> and the documentation for L<C<IPC::SysV>|IPC::SysV>. Portability issues: L<perlport/shmget>. =item shmread ID,VAR,POS,SIZE X<shmread> X<shmwrite> =for Pod::Functions read SysV shared memory =item shmwrite ID,STRING,POS,SIZE =for Pod::Functions write SysV shared memory Reads or writes the System V shared memory segment ID starting at position POS for size SIZE by attaching to it, copying in/out, and detaching from it. When reading, VAR must be a variable that will hold the data read. When writing, if STRING is too long, only SIZE bytes are used; if STRING is too short, nulls are written to fill out SIZE bytes. Return true if successful, false on error. L<C<shmread>|/shmread ID,VAR,POS,SIZE> taints the variable. See also L<perlipc/"SysV IPC"> and the documentation for L<C<IPC::SysV>|IPC::SysV> and the L<C<IPC::Shareable>|IPC::Shareable> module from CPAN. Portability issues: L<perlport/shmread> and L<perlport/shmwrite>. =item shutdown SOCKET,HOW X<shutdown> =for Pod::Functions close down just half of a socket connection Shuts down a socket connection in the manner indicated by HOW, which has the same interpretation as in the syscall of the same name. shutdown($socket, 0); # I/we have stopped reading data shutdown($socket, 1); # I/we have stopped writing data shutdown($socket, 2); # I/we have stopped using this socket This is useful with sockets when you want to tell the other side you're done writing but not done reading, or vice versa. It's also a more insistent form of close because it also disables the file descriptor in any forked copies in other processes. Returns C<1> for success; on error, returns L<C<undef>|/undef EXPR> if the first argument is not a valid filehandle, or returns C<0> and sets L<C<$!>|perlvar/$!> for any other failure. =item sin EXPR X<sin> X<sine> X<asin> X<arcsine> =item sin =for Pod::Functions return the sine of a number Returns the sine of EXPR (expressed in radians). If EXPR is omitted, returns sine of L<C<$_>|perlvar/$_>. For the inverse sine operation, you may use the C<Math::Trig::asin> function, or use this relation: sub asin { atan2($_[0], sqrt(1 - $_[0] * $_[0])) } =item sleep EXPR X<sleep> X<pause> =item sleep =for Pod::Functions block for some number of seconds Causes the script to sleep for (integer) EXPR seconds, or forever if no argument is given. Returns the integer number of seconds actually slept. May be interrupted if the process receives a signal such as C<SIGALRM>. eval { local $SIG{ALRM} = sub { die "Alarm!\n" }; sleep; }; die $@ unless $@ eq "Alarm!\n"; You probably cannot mix L<C<alarm>|/alarm SECONDS> and L<C<sleep>|/sleep EXPR> calls, because L<C<sleep>|/sleep EXPR> is often implemented using L<C<alarm>|/alarm SECONDS>. On some older systems, it may sleep up to a full second less than what you requested, depending on how it counts seconds. Most modern systems always sleep the full amount. They may appear to sleep longer than that, however, because your process might not be scheduled right away in a busy multitasking system. For delays of finer granularity than one second, the L<Time::HiRes> module (from CPAN, and starting from Perl 5.8 part of the standard distribution) provides L<C<usleep>|Time::HiRes/usleep ( $useconds )>. You may also use Perl's four-argument version of L<C<select>|/select RBITS,WBITS,EBITS,TIMEOUT> leaving the first three arguments undefined, or you might be able to use the L<C<syscall>|/syscall NUMBER, LIST> interface to access L<setitimer(2)> if your system supports it. See L<perlfaq8> for details. See also the L<POSIX> module's L<C<pause>|POSIX/C<pause>> function. =item socket SOCKET,DOMAIN,TYPE,PROTOCOL X<socket> =for Pod::Functions create a socket Opens a socket of the specified kind and attaches it to filehandle SOCKET. DOMAIN, TYPE, and PROTOCOL are specified the same as for the syscall of the same name. You should C<use Socket> first to get the proper definitions imported. See the examples in L<perlipc/"Sockets: Client/Server Communication">. On systems that support a close-on-exec flag on files, the flag will be set for the newly opened file descriptor, as determined by the value of L<C<$^F>|perlvar/$^F>. See L<perlvar/$^F>. =item socketpair SOCKET1,SOCKET2,DOMAIN,TYPE,PROTOCOL X<socketpair> =for Pod::Functions create a pair of sockets Creates an unnamed pair of sockets in the specified domain, of the specified type. DOMAIN, TYPE, and PROTOCOL are specified the same as for the syscall of the same name. If unimplemented, raises an exception. Returns true if successful. On systems that support a close-on-exec flag on files, the flag will be set for the newly opened file descriptors, as determined by the value of L<C<$^F>|perlvar/$^F>. See L<perlvar/$^F>. Some systems define L<C<pipe>|/pipe READHANDLE,WRITEHANDLE> in terms of L<C<socketpair>|/socketpair SOCKET1,SOCKET2,DOMAIN,TYPE,PROTOCOL>, in which a call to C<pipe($rdr, $wtr)> is essentially: use Socket; socketpair(my $rdr, my $wtr, AF_UNIX, SOCK_STREAM, PF_UNSPEC); shutdown($rdr, 1); # no more writing for reader shutdown($wtr, 0); # no more reading for writer See L<perlipc> for an example of socketpair use. Perl 5.8 and later will emulate socketpair using IP sockets to localhost if your system implements sockets but not socketpair. Portability issues: L<perlport/socketpair>. =item sort SUBNAME LIST X<sort> =item sort BLOCK LIST =item sort LIST =for Pod::Functions sort a list of values In list context, this sorts the LIST and returns the sorted list value. In scalar context, the behaviour of L<C<sort>|/sort SUBNAME LIST> is undefined. If SUBNAME or BLOCK is omitted, L<C<sort>|/sort SUBNAME LIST>s in standard string comparison order. If SUBNAME is specified, it gives the name of a subroutine that returns an integer less than, equal to, or greater than C<0>, depending on how the elements of the list are to be ordered. (The C<< <=> >> and C<cmp> operators are extremely useful in such routines.) SUBNAME may be a scalar variable name (unsubscripted), in which case the value provides the name of (or a reference to) the actual subroutine to use. In place of a SUBNAME, you can provide a BLOCK as an anonymous, in-line sort subroutine. If the subroutine's prototype is C<($$)>, the elements to be compared are passed by reference in L<C<@_>|perlvar/@_>, as for a normal subroutine. This is slower than unprototyped subroutines, where the elements to be compared are passed into the subroutine as the package global variables C<$a> and C<$b> (see example below). If the subroutine is an XSUB, the elements to be compared are pushed on to the stack, the way arguments are usually passed to XSUBs. C<$a> and C<$b> are not set. The values to be compared are always passed by reference and should not be modified. You also cannot exit out of the sort block or subroutine using any of the loop control operators described in L<perlsyn> or with L<C<goto>|/goto LABEL>. When L<C<use locale>|locale> (but not C<use locale ':not_characters'>) is in effect, C<sort LIST> sorts LIST according to the current collation locale. See L<perllocale>. L<C<sort>|/sort SUBNAME LIST> returns aliases into the original list, much as a for loop's index variable aliases the list elements. That is, modifying an element of a list returned by L<C<sort>|/sort SUBNAME LIST> (for example, in a C<foreach>, L<C<map>|/map BLOCK LIST> or L<C<grep>|/grep BLOCK LIST>) actually modifies the element in the original list. This is usually something to be avoided when writing clear code. Historically Perl has varied in whether sorting is stable by default. If stability matters, it can be controlled explicitly by using the L<sort> pragma. Examples: # sort lexically my @articles = sort @files; # same thing, but with explicit sort routine my @articles = sort {$a cmp $b} @files; # now case-insensitively my @articles = sort {fc($a) cmp fc($b)} @files; # same thing in reversed order my @articles = sort {$b cmp $a} @files; # sort numerically ascending my @articles = sort {$a <=> $b} @files; # sort numerically descending my @articles = sort {$b <=> $a} @files; # this sorts the %age hash by value instead of key # using an in-line function my @eldest = sort { $age{$b} <=> $age{$a} } keys %age; # sort using explicit subroutine name sub byage { $age{$a} <=> $age{$b}; # presuming numeric } my @sortedclass = sort byage @class; sub backwards { $b cmp $a } my @harry = qw(dog cat x Cain Abel); my @george = qw(gone chased yz Punished Axed); print sort @harry; # prints AbelCaincatdogx print sort backwards @harry; # prints xdogcatCainAbel print sort @george, 'to', @harry; # prints AbelAxedCainPunishedcatchaseddoggonetoxyz # inefficiently sort by descending numeric compare using # the first integer after the first = sign, or the # whole record case-insensitively otherwise my @new = sort { ($b =~ /=(\d+)/)[0] <=> ($a =~ /=(\d+)/)[0] || fc($a) cmp fc($b) } @old; # same thing, but much more efficiently; # we'll build auxiliary indices instead # for speed my (@nums, @caps); for (@old) { push @nums, ( /=(\d+)/ ? $1 : undef ); push @caps, fc($_); } my @new = @old[ sort { $nums[$b] <=> $nums[$a] || $caps[$a] cmp $caps[$b] } 0..$#old ]; # same thing, but without any temps my @new = map { $_->[0] } sort { $b->[1] <=> $a->[1] || $a->[2] cmp $b->[2] } map { [$_, /=(\d+)/, fc($_)] } @old; # using a prototype allows you to use any comparison subroutine # as a sort subroutine (including other package's subroutines) package Other; sub backwards ($$) { $_[1] cmp $_[0]; } # $a and $b are # not set here package main; my @new = sort Other::backwards @old; # guarantee stability use sort 'stable'; my @new = sort { substr($a, 3, 5) cmp substr($b, 3, 5) } @old; Warning: syntactical care is required when sorting the list returned from a function. If you want to sort the list returned by the function call C<find_records(@key)>, you can use: my @contact = sort { $a cmp $b } find_records @key; my @contact = sort +find_records(@key); my @contact = sort &find_records(@key); my @contact = sort(find_records(@key)); If instead you want to sort the array C<@key> with the comparison routine C<find_records()> then you can use: my @contact = sort { find_records() } @key; my @contact = sort find_records(@key); my @contact = sort(find_records @key); my @contact = sort(find_records (@key)); C<$a> and C<$b> are set as package globals in the package the sort() is called from. That means C<$main::a> and C<$main::b> (or C<$::a> and C<$::b>) in the C<main> package, C<$FooPack::a> and C<$FooPack::b> in the C<FooPack> package, etc. If the sort block is in scope of a C<my> or C<state> declaration of C<$a> and/or C<$b>, you I<must> spell out the full name of the variables in the sort block : package main; my $a = "C"; # DANGER, Will Robinson, DANGER !!! print sort { $a cmp $b } qw(A C E G B D F H); # WRONG sub badlexi { $a cmp $b } print sort badlexi qw(A C E G B D F H); # WRONG # the above prints BACFEDGH or some other incorrect ordering print sort { $::a cmp $::b } qw(A C E G B D F H); # OK print sort { our $a cmp our $b } qw(A C E G B D F H); # also OK print sort { our ($a, $b); $a cmp $b } qw(A C E G B D F H); # also OK sub lexi { our $a cmp our $b } print sort lexi qw(A C E G B D F H); # also OK # the above print ABCDEFGH With proper care you may mix package and my (or state) C<$a> and/or C<$b>: my $a = { tiny => -2, small => -1, normal => 0, big => 1, huge => 2 }; say sort { $a->{our $a} <=> $a->{our $b} } qw{ huge normal tiny small big}; # prints tinysmallnormalbighuge C<$a> and C<$b> are implicitly local to the sort() execution and regain their former values upon completing the sort. Sort subroutines written using C<$a> and C<$b> are bound to their calling package. It is possible, but of limited interest, to define them in a different package, since the subroutine must still refer to the calling package's C<$a> and C<$b> : package Foo; sub lexi { $Bar::a cmp $Bar::b } package Bar; ... sort Foo::lexi ... Use the prototyped versions (see above) for a more generic alternative. The comparison function is required to behave. If it returns inconsistent results (sometimes saying C<$x[1]> is less than C<$x[2]> and sometimes saying the opposite, for example) the results are not well-defined. Because C<< <=> >> returns L<C<undef>|/undef EXPR> when either operand is C<NaN> (not-a-number), be careful when sorting with a comparison function like C<< $a <=> $b >> any lists that might contain a C<NaN>. The following example takes advantage that C<NaN != NaN> to eliminate any C<NaN>s from the input list. my @result = sort { $a <=> $b } grep { $_ == $_ } @input; =item splice ARRAY,OFFSET,LENGTH,LIST X<splice> =item splice ARRAY,OFFSET,LENGTH =item splice ARRAY,OFFSET =item splice ARRAY =for Pod::Functions add or remove elements anywhere in an array Removes the elements designated by OFFSET and LENGTH from an array, and replaces them with the elements of LIST, if any. In list context, returns the elements removed from the array. In scalar context, returns the last element removed, or L<C<undef>|/undef EXPR> if no elements are removed. The array grows or shrinks as necessary. If OFFSET is negative then it starts that far from the end of the array. If LENGTH is omitted, removes everything from OFFSET onward. If LENGTH is negative, removes the elements from OFFSET onward except for -LENGTH elements at the end of the array. If both OFFSET and LENGTH are omitted, removes everything. If OFFSET is past the end of the array and a LENGTH was provided, Perl issues a warning, and splices at the end of the array. The following equivalences hold (assuming C<< $#a >= $i >> ) push(@a,$x,$y) splice(@a,@a,0,$x,$y) pop(@a) splice(@a,-1) shift(@a) splice(@a,0,1) unshift(@a,$x,$y) splice(@a,0,0,$x,$y) $a[$i] = $y splice(@a,$i,1,$y) L<C<splice>|/splice ARRAY,OFFSET,LENGTH,LIST> can be used, for example, to implement n-ary queue processing: sub nary_print { my $n = shift; while (my @next_n = splice @_, 0, $n) { say join q{ -- }, @next_n; } } nary_print(3, qw(a b c d e f g h)); # prints: # a -- b -- c # d -- e -- f # g -- h Starting with Perl 5.14, an experimental feature allowed L<C<splice>|/splice ARRAY,OFFSET,LENGTH,LIST> to take a scalar expression. This experiment has been deemed unsuccessful, and was removed as of Perl 5.24. =item split /PATTERN/,EXPR,LIMIT X<split> =item split /PATTERN/,EXPR =item split /PATTERN/ =item split =for Pod::Functions split up a string using a regexp delimiter Splits the string EXPR into a list of strings and returns the list in list context, or the size of the list in scalar context. (Prior to Perl 5.11, it also overwrote C<@_> with the list in void and scalar context. If you target old perls, beware.) If only PATTERN is given, EXPR defaults to L<C<$_>|perlvar/$_>. Anything in EXPR that matches PATTERN is taken to be a separator that separates the EXPR into substrings (called "I<fields>") that do B<not> include the separator. Note that a separator may be longer than one character or even have no characters at all (the empty string, which is a zero-width match). The PATTERN need not be constant; an expression may be used to specify a pattern that varies at runtime. If PATTERN matches the empty string, the EXPR is split at the match position (between characters). As an example, the following: print join(':', split(/b/, 'abc')), "\n"; uses the C<b> in C<'abc'> as a separator to produce the output C<a:c>. However, this: print join(':', split(//, 'abc')), "\n"; uses empty string matches as separators to produce the output C<a:b:c>; thus, the empty string may be used to split EXPR into a list of its component characters. As a special case for L<C<split>|/split E<sol>PATTERNE<sol>,EXPR,LIMIT>, the empty pattern given in L<match operator|perlop/"m/PATTERN/msixpodualngc"> syntax (C<//>) specifically matches the empty string, which is contrary to its usual interpretation as the last successful match. If PATTERN is C</^/>, then it is treated as if it used the L<multiline modifier|perlreref/OPERATORS> (C</^/m>), since it isn't much use otherwise. C<E<sol>m> and any of the other pattern modifiers valid for C<qr> (summarized in L<perlop/qrE<sol>STRINGE<sol>msixpodualn>) may be specified explicitly. As another special case, L<C<split>|/split E<sol>PATTERNE<sol>,EXPR,LIMIT> emulates the default behavior of the command line tool B<awk> when the PATTERN is either omitted or a string composed of a single space character (such as S<C<' '>> or S<C<"\x20">>, but not e.g. S<C</ />>). In this case, any leading whitespace in EXPR is removed before splitting occurs, and the PATTERN is instead treated as if it were C</\s+/>; in particular, this means that I<any> contiguous whitespace (not just a single space character) is used as a separator. However, this special treatment can be avoided by specifying the pattern S<C</ />> instead of the string S<C<" ">>, thereby allowing only a single space character to be a separator. In earlier Perls this special case was restricted to the use of a plain S<C<" ">> as the pattern argument to split; in Perl 5.18.0 and later this special case is triggered by any expression which evaluates to the simple string S<C<" ">>. As of Perl 5.28, this special-cased whitespace splitting works as expected in the scope of L<< S<C<"use feature 'unicode_strings">>|feature/The 'unicode_strings' feature >>. In previous versions, and outside the scope of that feature, it exhibits L<perlunicode/The "Unicode Bug">: characters that are whitespace according to Unicode rules but not according to ASCII rules can be treated as part of fields rather than as field separators, depending on the string's internal encoding. If omitted, PATTERN defaults to a single space, S<C<" ">>, triggering the previously described I<awk> emulation. If LIMIT is specified and positive, it represents the maximum number of fields into which the EXPR may be split; in other words, LIMIT is one greater than the maximum number of times EXPR may be split. Thus, the LIMIT value C<1> means that EXPR may be split a maximum of zero times, producing a maximum of one field (namely, the entire value of EXPR). For instance: print join(':', split(//, 'abc', 1)), "\n"; produces the output C<abc>, and this: print join(':', split(//, 'abc', 2)), "\n"; produces the output C<a:bc>, and each of these: print join(':', split(//, 'abc', 3)), "\n"; print join(':', split(//, 'abc', 4)), "\n"; produces the output C<a:b:c>. If LIMIT is negative, it is treated as if it were instead arbitrarily large; as many fields as possible are produced. If LIMIT is omitted (or, equivalently, zero), then it is usually treated as if it were instead negative but with the exception that trailing empty fields are stripped (empty leading fields are always preserved); if all fields are empty, then all fields are considered to be trailing (and are thus stripped in this case). Thus, the following: print join(':', split(/,/, 'a,b,c,,,')), "\n"; produces the output C<a:b:c>, but the following: print join(':', split(/,/, 'a,b,c,,,', -1)), "\n"; produces the output C<a:b:c:::>. In time-critical applications, it is worthwhile to avoid splitting into more fields than necessary. Thus, when assigning to a list, if LIMIT is omitted (or zero), then LIMIT is treated as though it were one larger than the number of variables in the list; for the following, LIMIT is implicitly 3: my ($login, $passwd) = split(/:/); Note that splitting an EXPR that evaluates to the empty string always produces zero fields, regardless of the LIMIT specified. An empty leading field is produced when there is a positive-width match at the beginning of EXPR. For instance: print join(':', split(/ /, ' abc')), "\n"; produces the output C<:abc>. However, a zero-width match at the beginning of EXPR never produces an empty field, so that: print join(':', split(//, ' abc')); produces the output S<C< :a:b:c>> (rather than S<C<: :a:b:c>>). An empty trailing field, on the other hand, is produced when there is a match at the end of EXPR, regardless of the length of the match (of course, unless a non-zero LIMIT is given explicitly, such fields are removed, as in the last example). Thus: print join(':', split(//, ' abc', -1)), "\n"; produces the output S<C< :a:b:c:>>. If the PATTERN contains L<capturing groups|perlretut/Grouping things and hierarchical matching>, then for each separator, an additional field is produced for each substring captured by a group (in the order in which the groups are specified, as per L<backreferences|perlretut/Backreferences>); if any group does not match, then it captures the L<C<undef>|/undef EXPR> value instead of a substring. Also, note that any such additional field is produced whenever there is a separator (that is, whenever a split occurs), and such an additional field does B<not> count towards the LIMIT. Consider the following expressions evaluated in list context (each returned list is provided in the associated comment): split(/-|,/, "1-10,20", 3) # ('1', '10', '20') split(/(-|,)/, "1-10,20", 3) # ('1', '-', '10', ',', '20') split(/-|(,)/, "1-10,20", 3) # ('1', undef, '10', ',', '20') split(/(-)|,/, "1-10,20", 3) # ('1', '-', '10', undef, '20') split(/(-)|(,)/, "1-10,20", 3) # ('1', '-', undef, '10', undef, ',', '20') =item sprintf FORMAT, LIST X<sprintf> =for Pod::Functions formatted print into a string Returns a string formatted by the usual L<C<printf>|/printf FILEHANDLE FORMAT, LIST> conventions of the C library function L<C<sprintf>|/sprintf FORMAT, LIST>. See below for more details and see L<sprintf(3)> or L<printf(3)> on your system for an explanation of the general principles. For example: # Format number with up to 8 leading zeroes my $result = sprintf("%08d", $number); # Round number to 3 digits after decimal point my $rounded = sprintf("%.3f", $number); Perl does its own L<C<sprintf>|/sprintf FORMAT, LIST> formatting: it emulates the C function L<sprintf(3)>, but doesn't use it except for floating-point numbers, and even then only standard modifiers are allowed. Non-standard extensions in your local L<sprintf(3)> are therefore unavailable from Perl. Unlike L<C<printf>|/printf FILEHANDLE FORMAT, LIST>, L<C<sprintf>|/sprintf FORMAT, LIST> does not do what you probably mean when you pass it an array as your first argument. The array is given scalar context, and instead of using the 0th element of the array as the format, Perl will use the count of elements in the array as the format, which is almost never useful. Perl's L<C<sprintf>|/sprintf FORMAT, LIST> permits the following universally-known conversions: %% a percent sign %c a character with the given number %s a string %d a signed integer, in decimal %u an unsigned integer, in decimal %o an unsigned integer, in octal %x an unsigned integer, in hexadecimal %e a floating-point number, in scientific notation %f a floating-point number, in fixed decimal notation %g a floating-point number, in %e or %f notation In addition, Perl permits the following widely-supported conversions: %X like %x, but using upper-case letters %E like %e, but using an upper-case "E" %G like %g, but with an upper-case "E" (if applicable) %b an unsigned integer, in binary %B like %b, but using an upper-case "B" with the # flag %p a pointer (outputs the Perl value's address in hexadecimal) %n special: *stores* the number of characters output so far into the next argument in the parameter list %a hexadecimal floating point %A like %a, but using upper-case letters Finally, for backward (and we do mean "backward") compatibility, Perl permits these unnecessary but widely-supported conversions: %i a synonym for %d %D a synonym for %ld %U a synonym for %lu %O a synonym for %lo %F a synonym for %f Note that the number of exponent digits in the scientific notation produced by C<%e>, C<%E>, C<%g> and C<%G> for numbers with the modulus of the exponent less than 100 is system-dependent: it may be three or less (zero-padded as necessary). In other words, 1.23 times ten to the 99th may be either "1.23e99" or "1.23e099". Similarly for C<%a> and C<%A>: the exponent or the hexadecimal digits may float: especially the "long doubles" Perl configuration option may cause surprises. Between the C<%> and the format letter, you may specify several additional attributes controlling the interpretation of the format. In order, these are: =over 4 =item format parameter index An explicit format parameter index, such as C<2$>. By default sprintf will format the next unused argument in the list, but this allows you to take the arguments out of order: printf '%2$d %1$d', 12, 34; # prints "34 12" printf '%3$d %d %1$d', 1, 2, 3; # prints "3 1 1" =item flags one or more of: space prefix non-negative number with a space + prefix non-negative number with a plus sign - left-justify within the field 0 use zeros, not spaces, to right-justify # ensure the leading "0" for any octal, prefix non-zero hexadecimal with "0x" or "0X", prefix non-zero binary with "0b" or "0B" For example: printf '<% d>', 12; # prints "< 12>" printf '<% d>', 0; # prints "< 0>" printf '<% d>', -12; # prints "<-12>" printf '<%+d>', 12; # prints "<+12>" printf '<%+d>', 0; # prints "<+0>" printf '<%+d>', -12; # prints "<-12>" printf '<%6s>', 12; # prints "< 12>" printf '<%-6s>', 12; # prints "<12 >" printf '<%06s>', 12; # prints "<000012>" printf '<%#o>', 12; # prints "<014>" printf '<%#x>', 12; # prints "<0xc>" printf '<%#X>', 12; # prints "<0XC>" printf '<%#b>', 12; # prints "<0b1100>" printf '<%#B>', 12; # prints "<0B1100>" When a space and a plus sign are given as the flags at once, the space is ignored. printf '<%+ d>', 12; # prints "<+12>" printf '<% +d>', 12; # prints "<+12>" When the # flag and a precision are given in the %o conversion, the precision is incremented if it's necessary for the leading "0". printf '<%#.5o>', 012; # prints "<00012>" printf '<%#.5o>', 012345; # prints "<012345>" printf '<%#.0o>', 0; # prints "<0>" =item vector flag This flag tells Perl to interpret the supplied string as a vector of integers, one for each character in the string. Perl applies the format to each integer in turn, then joins the resulting strings with a separator (a dot C<.> by default). This can be useful for displaying ordinal values of characters in arbitrary strings: printf "%vd", "AB\x{100}"; # prints "65.66.256" printf "version is v%vd\n", $^V; # Perl's version Put an asterisk C<*> before the C<v> to override the string to use to separate the numbers: printf "address is %*vX\n", ":", $addr; # IPv6 address printf "bits are %0*v8b\n", " ", $bits; # random bitstring You can also explicitly specify the argument number to use for the join string using something like C<*2$v>; for example: printf '%*4$vX %*4$vX %*4$vX', # 3 IPv6 addresses @addr[1..3], ":"; =item (minimum) width Arguments are usually formatted to be only as wide as required to display the given value. You can override the width by putting a number here, or get the width from the next argument (with C<*>) or from a specified argument (e.g., with C<*2$>): printf "<%s>", "a"; # prints "<a>" printf "<%6s>", "a"; # prints "< a>" printf "<%*s>", 6, "a"; # prints "< a>" printf '<%*2$s>', "a", 6; # prints "< a>" printf "<%2s>", "long"; # prints "<long>" (does not truncate) If a field width obtained through C<*> is negative, it has the same effect as the C<-> flag: left-justification. =item precision, or maximum width X<precision> You can specify a precision (for numeric conversions) or a maximum width (for string conversions) by specifying a C<.> followed by a number. For floating-point formats except C<g> and C<G>, this specifies how many places right of the decimal point to show (the default being 6). For example: # these examples are subject to system-specific variation printf '<%f>', 1; # prints "<1.000000>" printf '<%.1f>', 1; # prints "<1.0>" printf '<%.0f>', 1; # prints "<1>" printf '<%e>', 10; # prints "<1.000000e+01>" printf '<%.1e>', 10; # prints "<1.0e+01>" For "g" and "G", this specifies the maximum number of significant digits to show; for example: # These examples are subject to system-specific variation. printf '<%g>', 1; # prints "<1>" printf '<%.10g>', 1; # prints "<1>" printf '<%g>', 100; # prints "<100>" printf '<%.1g>', 100; # prints "<1e+02>" printf '<%.2g>', 100.01; # prints "<1e+02>" printf '<%.5g>', 100.01; # prints "<100.01>" printf '<%.4g>', 100.01; # prints "<100>" printf '<%.1g>', 0.0111; # prints "<0.01>" printf '<%.2g>', 0.0111; # prints "<0.011>" printf '<%.3g>', 0.0111; # prints "<0.0111>" For integer conversions, specifying a precision implies that the output of the number itself should be zero-padded to this width, where the 0 flag is ignored: printf '<%.6d>', 1; # prints "<000001>" printf '<%+.6d>', 1; # prints "<+000001>" printf '<%-10.6d>', 1; # prints "<000001 >" printf '<%10.6d>', 1; # prints "< 000001>" printf '<%010.6d>', 1; # prints "< 000001>" printf '<%+10.6d>', 1; # prints "< +000001>" printf '<%.6x>', 1; # prints "<000001>" printf '<%#.6x>', 1; # prints "<0x000001>" printf '<%-10.6x>', 1; # prints "<000001 >" printf '<%10.6x>', 1; # prints "< 000001>" printf '<%010.6x>', 1; # prints "< 000001>" printf '<%#10.6x>', 1; # prints "< 0x000001>" For string conversions, specifying a precision truncates the string to fit the specified width: printf '<%.5s>', "truncated"; # prints "<trunc>" printf '<%10.5s>', "truncated"; # prints "< trunc>" You can also get the precision from the next argument using C<.*>, or from a specified argument (e.g., with C<.*2$>): printf '<%.6x>', 1; # prints "<000001>" printf '<%.*x>', 6, 1; # prints "<000001>" printf '<%.*2$x>', 1, 6; # prints "<000001>" printf '<%6.*2$x>', 1, 4; # prints "< 0001>" If a precision obtained through C<*> is negative, it counts as having no precision at all. printf '<%.*s>', 7, "string"; # prints "<string>" printf '<%.*s>', 3, "string"; # prints "<str>" printf '<%.*s>', 0, "string"; # prints "<>" printf '<%.*s>', -1, "string"; # prints "<string>" printf '<%.*d>', 1, 0; # prints "<0>" printf '<%.*d>', 0, 0; # prints "<>" printf '<%.*d>', -1, 0; # prints "<0>" =item size For numeric conversions, you can specify the size to interpret the number as using C<l>, C<h>, C<V>, C<q>, C<L>, or C<ll>. For integer conversions (C<d u o x X b i D U O>), numbers are usually assumed to be whatever the default integer size is on your platform (usually 32 or 64 bits), but you can override this to use instead one of the standard C types, as supported by the compiler used to build Perl: hh interpret integer as C type "char" or "unsigned char" on Perl 5.14 or later h interpret integer as C type "short" or "unsigned short" j interpret integer as C type "intmax_t" on Perl 5.14 or later; and prior to Perl 5.30, only with a C99 compiler (unportable) l interpret integer as C type "long" or "unsigned long" q, L, or ll interpret integer as C type "long long", "unsigned long long", or "quad" (typically 64-bit integers) t interpret integer as C type "ptrdiff_t" on Perl 5.14 or later z interpret integer as C types "size_t" or "ssize_t" on Perl 5.14 or later As of 5.14, none of these raises an exception if they are not supported on your platform. However, if warnings are enabled, a warning of the L<C<printf>|warnings> warning class is issued on an unsupported conversion flag. Should you instead prefer an exception, do this: use warnings FATAL => "printf"; If you would like to know about a version dependency before you start running the program, put something like this at its top: use 5.014; # for hh/j/t/z/ printf modifiers You can find out whether your Perl supports quads via L<Config>: use Config; if ($Config{use64bitint} eq "define" || $Config{longsize} >= 8) { print "Nice quads!\n"; } For floating-point conversions (C<e f g E F G>), numbers are usually assumed to be the default floating-point size on your platform (double or long double), but you can force "long double" with C<q>, C<L>, or C<ll> if your platform supports them. You can find out whether your Perl supports long doubles via L<Config>: use Config; print "long doubles\n" if $Config{d_longdbl} eq "define"; You can find out whether Perl considers "long double" to be the default floating-point size to use on your platform via L<Config>: use Config; if ($Config{uselongdouble} eq "define") { print "long doubles by default\n"; } It can also be that long doubles and doubles are the same thing: use Config; ($Config{doublesize} == $Config{longdblsize}) && print "doubles are long doubles\n"; The size specifier C<V> has no effect for Perl code, but is supported for compatibility with XS code. It means "use the standard size for a Perl integer or floating-point number", which is the default. =item order of arguments Normally, L<C<sprintf>|/sprintf FORMAT, LIST> takes the next unused argument as the value to format for each format specification. If the format specification uses C<*> to require additional arguments, these are consumed from the argument list in the order they appear in the format specification I<before> the value to format. Where an argument is specified by an explicit index, this does not affect the normal order for the arguments, even when the explicitly specified index would have been the next argument. So: printf "<%*.*s>", $a, $b, $c; uses C<$a> for the width, C<$b> for the precision, and C<$c> as the value to format; while: printf '<%*1$.*s>', $a, $b; would use C<$a> for the width and precision, and C<$b> as the value to format. Here are some more examples; be aware that when using an explicit index, the C<$> may need escaping: printf "%2\$d %d\n", 12, 34; # will print "34 12\n" printf "%2\$d %d %d\n", 12, 34; # will print "34 12 34\n" printf "%3\$d %d %d\n", 12, 34, 56; # will print "56 12 34\n" printf "%2\$*3\$d %d\n", 12, 34, 3; # will print " 34 12\n" printf "%*1\$.*f\n", 4, 5, 10; # will print "5.0000\n" =back If L<C<use locale>|locale> (including C<use locale ':not_characters'>) is in effect and L<C<POSIX::setlocale>|POSIX/C<setlocale>> has been called, the character used for the decimal separator in formatted floating-point numbers is affected by the C<LC_NUMERIC> locale. See L<perllocale> and L<POSIX>. =item sqrt EXPR X<sqrt> X<root> X<square root> =item sqrt =for Pod::Functions square root function Return the positive square root of EXPR. If EXPR is omitted, uses L<C<$_>|perlvar/$_>. Works only for non-negative operands unless you've loaded the L<C<Math::Complex>|Math::Complex> module. use Math::Complex; print sqrt(-4); # prints 2i =item srand EXPR X<srand> X<seed> X<randseed> =item srand =for Pod::Functions seed the random number generator Sets and returns the random number seed for the L<C<rand>|/rand EXPR> operator. The point of the function is to "seed" the L<C<rand>|/rand EXPR> function so that L<C<rand>|/rand EXPR> can produce a different sequence each time you run your program. When called with a parameter, L<C<srand>|/srand EXPR> uses that for the seed; otherwise it (semi-)randomly chooses a seed. In either case, starting with Perl 5.14, it returns the seed. To signal that your code will work I<only> on Perls of a recent vintage: use 5.014; # so srand returns the seed If L<C<srand>|/srand EXPR> is not called explicitly, it is called implicitly without a parameter at the first use of the L<C<rand>|/rand EXPR> operator. However, there are a few situations where programs are likely to want to call L<C<srand>|/srand EXPR>. One is for generating predictable results, generally for testing or debugging. There, you use C<srand($seed)>, with the same C<$seed> each time. Another case is that you may want to call L<C<srand>|/srand EXPR> after a L<C<fork>|/fork> to avoid child processes sharing the same seed value as the parent (and consequently each other). Do B<not> call C<srand()> (i.e., without an argument) more than once per process. The internal state of the random number generator should contain more entropy than can be provided by any seed, so calling L<C<srand>|/srand EXPR> again actually I<loses> randomness. Most implementations of L<C<srand>|/srand EXPR> take an integer and will silently truncate decimal numbers. This means C<srand(42)> will usually produce the same results as C<srand(42.1)>. To be safe, always pass L<C<srand>|/srand EXPR> an integer. A typical use of the returned seed is for a test program which has too many combinations to test comprehensively in the time available to it each run. It can test a random subset each time, and should there be a failure, log the seed used for that run so that it can later be used to reproduce the same results. B<L<C<rand>|/rand EXPR> is not cryptographically secure. You should not rely on it in security-sensitive situations.> As of this writing, a number of third-party CPAN modules offer random number generators intended by their authors to be cryptographically secure, including: L<Data::Entropy>, L<Crypt::Random>, L<Math::Random::Secure>, and L<Math::TrulyRandom>. =item stat FILEHANDLE X<stat> X<file, status> X<ctime> =item stat EXPR =item stat DIRHANDLE =item stat =for Pod::Functions get a file's status information Returns a 13-element list giving the status info for a file, either the file opened via FILEHANDLE or DIRHANDLE, or named by EXPR. If EXPR is omitted, it stats L<C<$_>|perlvar/$_> (not C<_>!). Returns the empty list if L<C<stat>|/stat FILEHANDLE> fails. Typically used as follows: my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size, $atime,$mtime,$ctime,$blksize,$blocks) = stat($filename); Not all fields are supported on all filesystem types. Here are the meanings of the fields: 0 dev device number of filesystem 1 ino inode number 2 mode file mode (type and permissions) 3 nlink number of (hard) links to the file 4 uid numeric user ID of file's owner 5 gid numeric group ID of file's owner 6 rdev the device identifier (special files only) 7 size total size of file, in bytes 8 atime last access time in seconds since the epoch 9 mtime last modify time in seconds since the epoch 10 ctime inode change time in seconds since the epoch (*) 11 blksize preferred I/O size in bytes for interacting with the file (may vary from file to file) 12 blocks actual number of system-specific blocks allocated on disk (often, but not always, 512 bytes each) (The epoch was at 00:00 January 1, 1970 GMT.) (*) Not all fields are supported on all filesystem types. Notably, the ctime field is non-portable. In particular, you cannot expect it to be a "creation time"; see L<perlport/"Files and Filesystems"> for details. If L<C<stat>|/stat FILEHANDLE> is passed the special filehandle consisting of an underline, no stat is done, but the current contents of the stat structure from the last L<C<stat>|/stat FILEHANDLE>, L<C<lstat>|/lstat FILEHANDLE>, or filetest are returned. Example: if (-x $file && (($d) = stat(_)) && $d < 0) { print "$file is executable NFS file\n"; } (This works on machines only for which the device number is negative under NFS.) On some platforms inode numbers are of a type larger than perl knows how to handle as integer numerical values. If necessary, an inode number will be returned as a decimal string in order to preserve the entire value. If used in a numeric context, this will be converted to a floating-point numerical value, with rounding, a fate that is best avoided. Therefore, you should prefer to compare inode numbers using C<eq> rather than C<==>. C<eq> will work fine on inode numbers that are represented numerically, as well as those represented as strings. Because the mode contains both the file type and its permissions, you should mask off the file type portion and (s)printf using a C<"%o"> if you want to see the real permissions. my $mode = (stat($filename))[2]; printf "Permissions are %04o\n", $mode & 07777; In scalar context, L<C<stat>|/stat FILEHANDLE> returns a boolean value indicating success or failure, and, if successful, sets the information associated with the special filehandle C<_>. The L<File::stat> module provides a convenient, by-name access mechanism: use File::stat; my $sb = stat($filename); printf "File is %s, size is %s, perm %04o, mtime %s\n", $filename, $sb->size, $sb->mode & 07777, scalar localtime $sb->mtime; You can import symbolic mode constants (C<S_IF*>) and functions (C<S_IS*>) from the L<Fcntl> module: use Fcntl ':mode'; my $mode = (stat($filename))[2]; my $user_rwx = ($mode & S_IRWXU) >> 6; my $group_read = ($mode & S_IRGRP) >> 3; my $other_execute = $mode & S_IXOTH; printf "Permissions are %04o\n", S_IMODE($mode), "\n"; my $is_setuid = $mode & S_ISUID; my $is_directory = S_ISDIR($mode); You could write the last two using the C<-u> and C<-d> operators. Commonly available C<S_IF*> constants are: # Permissions: read, write, execute, for user, group, others. S_IRWXU S_IRUSR S_IWUSR S_IXUSR S_IRWXG S_IRGRP S_IWGRP S_IXGRP S_IRWXO S_IROTH S_IWOTH S_IXOTH # Setuid/Setgid/Stickiness/SaveText. # Note that the exact meaning of these is system-dependent. S_ISUID S_ISGID S_ISVTX S_ISTXT # File types. Not all are necessarily available on # your system. S_IFREG S_IFDIR S_IFLNK S_IFBLK S_IFCHR S_IFIFO S_IFSOCK S_IFWHT S_ENFMT # The following are compatibility aliases for S_IRUSR, # S_IWUSR, and S_IXUSR. S_IREAD S_IWRITE S_IEXEC and the C<S_IF*> functions are S_IMODE($mode) the part of $mode containing the permission bits and the setuid/setgid/sticky bits S_IFMT($mode) the part of $mode containing the file type which can be bit-anded with (for example) S_IFREG or with the following functions # The operators -f, -d, -l, -b, -c, -p, and -S. S_ISREG($mode) S_ISDIR($mode) S_ISLNK($mode) S_ISBLK($mode) S_ISCHR($mode) S_ISFIFO($mode) S_ISSOCK($mode) # No direct -X operator counterpart, but for the first one # the -g operator is often equivalent. The ENFMT stands for # record flocking enforcement, a platform-dependent feature. S_ISENFMT($mode) S_ISWHT($mode) See your native L<chmod(2)> and L<stat(2)> documentation for more details about the C<S_*> constants. To get status info for a symbolic link instead of the target file behind the link, use the L<C<lstat>|/lstat FILEHANDLE> function. Portability issues: L<perlport/stat>. =item state VARLIST X<state> =item state TYPE VARLIST =item state VARLIST : ATTRS =item state TYPE VARLIST : ATTRS =for Pod::Functions +state declare and assign a persistent lexical variable L<C<state>|/state VARLIST> declares a lexically scoped variable, just like L<C<my>|/my VARLIST>. However, those variables will never be reinitialized, contrary to lexical variables that are reinitialized each time their enclosing block is entered. See L<perlsub/"Persistent Private Variables"> for details. If more than one variable is listed, the list must be placed in parentheses. With a parenthesised list, L<C<undef>|/undef EXPR> can be used as a dummy placeholder. However, since initialization of state variables in such lists is currently not possible this would serve no purpose. L<C<state>|/state VARLIST> is available only if the L<C<"state"> feature|feature/The 'state' feature> is enabled or if it is prefixed with C<CORE::>. The L<C<"state"> feature|feature/The 'state' feature> is enabled automatically with a C<use v5.10> (or higher) declaration in the current scope. =item study SCALAR X<study> =item study =for Pod::Functions no-op, formerly optimized input data for repeated searches At this time, C<study> does nothing. This may change in the future. Prior to Perl version 5.16, it would create an inverted index of all characters that occurred in the given SCALAR (or L<C<$_>|perlvar/$_> if unspecified). When matching a pattern, the rarest character from the pattern would be looked up in this index. Rarity was based on some static frequency tables constructed from some C programs and English text. =item sub NAME BLOCK X<sub> =item sub NAME (PROTO) BLOCK =item sub NAME : ATTRS BLOCK =item sub NAME (PROTO) : ATTRS BLOCK =for Pod::Functions declare a subroutine, possibly anonymously This is subroutine definition, not a real function I<per se>. Without a BLOCK it's just a forward declaration. Without a NAME, it's an anonymous function declaration, so does return a value: the CODE ref of the closure just created. See L<perlsub> and L<perlref> for details about subroutines and references; see L<attributes> and L<Attribute::Handlers> for more information about attributes. =item __SUB__ X<__SUB__> =for Pod::Functions +current_sub the current subroutine, or C<undef> if not in a subroutine A special token that returns a reference to the current subroutine, or L<C<undef>|/undef EXPR> outside of a subroutine. The behaviour of L<C<__SUB__>|/__SUB__> within a regex code block (such as C</(?{...})/>) is subject to change. This token is only available under C<use v5.16> or the L<C<"current_sub"> feature|feature/The 'current_sub' feature>. See L<feature>. =item substr EXPR,OFFSET,LENGTH,REPLACEMENT X<substr> X<substring> X<mid> X<left> X<right> =item substr EXPR,OFFSET,LENGTH =item substr EXPR,OFFSET =for Pod::Functions get or alter a portion of a string Extracts a substring out of EXPR and returns it. First character is at offset zero. If OFFSET is negative, starts that far back from the end of the string. If LENGTH is omitted, returns everything through the end of the string. If LENGTH is negative, leaves that many characters off the end of the string. my $s = "The black cat climbed the green tree"; my $color = substr $s, 4, 5; # black my $middle = substr $s, 4, -11; # black cat climbed the my $end = substr $s, 14; # climbed the green tree my $tail = substr $s, -4; # tree my $z = substr $s, -4, 2; # tr You can use the L<C<substr>|/substr EXPR,OFFSET,LENGTH,REPLACEMENT> function as an lvalue, in which case EXPR must itself be an lvalue. If you assign something shorter than LENGTH, the string will shrink, and if you assign something longer than LENGTH, the string will grow to accommodate it. To keep the string the same length, you may need to pad or chop your value using L<C<sprintf>|/sprintf FORMAT, LIST>. If OFFSET and LENGTH specify a substring that is partly outside the string, only the part within the string is returned. If the substring is beyond either end of the string, L<C<substr>|/substr EXPR,OFFSET,LENGTH,REPLACEMENT> returns the undefined value and produces a warning. When used as an lvalue, specifying a substring that is entirely outside the string raises an exception. Here's an example showing the behavior for boundary cases: my $name = 'fred'; substr($name, 4) = 'dy'; # $name is now 'freddy' my $null = substr $name, 6, 2; # returns "" (no warning) my $oops = substr $name, 7; # returns undef, with warning substr($name, 7) = 'gap'; # raises an exception An alternative to using L<C<substr>|/substr EXPR,OFFSET,LENGTH,REPLACEMENT> as an lvalue is to specify the replacement string as the 4th argument. This allows you to replace parts of the EXPR and return what was there before in one operation, just as you can with L<C<splice>|/splice ARRAY,OFFSET,LENGTH,LIST>. my $s = "The black cat climbed the green tree"; my $z = substr $s, 14, 7, "jumped from"; # climbed # $s is now "The black cat jumped from the green tree" Note that the lvalue returned by the three-argument version of L<C<substr>|/substr EXPR,OFFSET,LENGTH,REPLACEMENT> acts as a 'magic bullet'; each time it is assigned to, it remembers which part of the original string is being modified; for example: my $x = '1234'; for (substr($x,1,2)) { $_ = 'a'; print $x,"\n"; # prints 1a4 $_ = 'xyz'; print $x,"\n"; # prints 1xyz4 $x = '56789'; $_ = 'pq'; print $x,"\n"; # prints 5pq9 } With negative offsets, it remembers its position from the end of the string when the target string is modified: my $x = '1234'; for (substr($x, -3, 2)) { $_ = 'a'; print $x,"\n"; # prints 1a4, as above $x = 'abcdefg'; print $_,"\n"; # prints f } Prior to Perl version 5.10, the result of using an lvalue multiple times was unspecified. Prior to 5.16, the result with negative offsets was unspecified. =item symlink OLDFILE,NEWFILE X<symlink> X<link> X<symbolic link> X<link, symbolic> =for Pod::Functions create a symbolic link to a file Creates a new filename symbolically linked to the old filename. Returns C<1> for success, C<0> otherwise. On systems that don't support symbolic links, raises an exception. To check for that, use eval: my $symlink_exists = eval { symlink("",""); 1 }; Portability issues: L<perlport/symlink>. =item syscall NUMBER, LIST X<syscall> X<system call> =for Pod::Functions execute an arbitrary system call Calls the system call specified as the first element of the list, passing the remaining elements as arguments to the system call. If unimplemented, raises an exception. The arguments are interpreted as follows: if a given argument is numeric, the argument is passed as an int. If not, the pointer to the string value is passed. You are responsible to make sure a string is pre-extended long enough to receive any result that might be written into a string. You can't use a string literal (or other read-only string) as an argument to L<C<syscall>|/syscall NUMBER, LIST> because Perl has to assume that any string pointer might be written through. If your integer arguments are not literals and have never been interpreted in a numeric context, you may need to add C<0> to them to force them to look like numbers. This emulates the L<C<syswrite>|/syswrite FILEHANDLE,SCALAR,LENGTH,OFFSET> function (or vice versa): require 'syscall.ph'; # may need to run h2ph my $s = "hi there\n"; syscall(SYS_write(), fileno(STDOUT), $s, length $s); Note that Perl supports passing of up to only 14 arguments to your syscall, which in practice should (usually) suffice. Syscall returns whatever value returned by the system call it calls. If the system call fails, L<C<syscall>|/syscall NUMBER, LIST> returns C<-1> and sets L<C<$!>|perlvar/$!> (errno). Note that some system calls I<can> legitimately return C<-1>. The proper way to handle such calls is to assign C<$! = 0> before the call, then check the value of L<C<$!>|perlvar/$!> if L<C<syscall>|/syscall NUMBER, LIST> returns C<-1>. There's a problem with C<syscall(SYS_pipe())>: it returns the file number of the read end of the pipe it creates, but there is no way to retrieve the file number of the other end. You can avoid this problem by using L<C<pipe>|/pipe READHANDLE,WRITEHANDLE> instead. Portability issues: L<perlport/syscall>. =item sysopen FILEHANDLE,FILENAME,MODE X<sysopen> =item sysopen FILEHANDLE,FILENAME,MODE,PERMS =for Pod::Functions +5.002 open a file, pipe, or descriptor Opens the file whose filename is given by FILENAME, and associates it with FILEHANDLE. If FILEHANDLE is an expression, its value is used as the real filehandle wanted; an undefined scalar will be suitably autovivified. This function calls the underlying operating system's L<open(2)> function with the parameters FILENAME, MODE, and PERMS. Returns true on success and L<C<undef>|/undef EXPR> otherwise. L<PerlIO> layers will be applied to the handle the same way they would in an L<C<open>|/open FILEHANDLE,MODE,EXPR> call that does not specify layers. That is, the current value of L<C<${^OPEN}>|perlvar/${^OPEN}> as set by the L<open> pragma in a lexical scope, or the C<-C> commandline option or C<PERL_UNICODE> environment variable in the main program scope, falling back to the platform defaults as described in L<PerlIO/Defaults and how to override them>. If you want to remove any layers that may transform the byte stream, use L<C<binmode>|/binmode FILEHANDLE, LAYER> after opening it. The possible values and flag bits of the MODE parameter are system-dependent; they are available via the standard module L<C<Fcntl>|Fcntl>. See the documentation of your operating system's L<open(2)> syscall to see which values and flag bits are available. You may combine several flags using the C<|>-operator. Some of the most common values are C<O_RDONLY> for opening the file in read-only mode, C<O_WRONLY> for opening the file in write-only mode, and C<O_RDWR> for opening the file in read-write mode. X<O_RDONLY> X<O_RDWR> X<O_WRONLY> For historical reasons, some values work on almost every system supported by Perl: 0 means read-only, 1 means write-only, and 2 means read/write. We know that these values do I<not> work under OS/390 and on the Macintosh; you probably don't want to use them in new code. If the file named by FILENAME does not exist and the L<C<open>|/open FILEHANDLE,MODE,EXPR> call creates it (typically because MODE includes the C<O_CREAT> flag), then the value of PERMS specifies the permissions of the newly created file. If you omit the PERMS argument to L<C<sysopen>|/sysopen FILEHANDLE,FILENAME,MODE>, Perl uses the octal value C<0666>. These permission values need to be in octal, and are modified by your process's current L<C<umask>|/umask EXPR>. X<O_CREAT> In many systems the C<O_EXCL> flag is available for opening files in exclusive mode. This is B<not> locking: exclusiveness means here that if the file already exists, L<C<sysopen>|/sysopen FILEHANDLE,FILENAME,MODE> fails. C<O_EXCL> may not work on network filesystems, and has no effect unless the C<O_CREAT> flag is set as well. Setting C<O_CREAT|O_EXCL> prevents the file from being opened if it is a symbolic link. It does not protect against symbolic links in the file's path. X<O_EXCL> Sometimes you may want to truncate an already-existing file. This can be done using the C<O_TRUNC> flag. The behavior of C<O_TRUNC> with C<O_RDONLY> is undefined. X<O_TRUNC> You should seldom if ever use C<0644> as argument to L<C<sysopen>|/sysopen FILEHANDLE,FILENAME,MODE>, because that takes away the user's option to have a more permissive umask. Better to omit it. See L<C<umask>|/umask EXPR> for more on this. This function has no direct relation to the usage of L<C<sysread>|/sysread FILEHANDLE,SCALAR,LENGTH,OFFSET>, L<C<syswrite>|/syswrite FILEHANDLE,SCALAR,LENGTH,OFFSET>, or L<C<sysseek>|/sysseek FILEHANDLE,POSITION,WHENCE>. A handle opened with this function can be used with buffered IO just as one opened with L<C<open>|/open FILEHANDLE,MODE,EXPR> can be used with unbuffered IO. Note that under Perls older than 5.8.0, L<C<sysopen>|/sysopen FILEHANDLE,FILENAME,MODE> depends on the L<fdopen(3)> C library function. On many Unix systems, L<fdopen(3)> is known to fail when file descriptors exceed a certain value, typically 255. If you need more file descriptors than that, consider using the L<C<POSIX::open>|POSIX/C<open>> function. For Perls 5.8.0 and later, PerlIO is (most often) the default. See L<perlopentut> for a kinder, gentler explanation of opening files. Portability issues: L<perlport/sysopen>. =item sysread FILEHANDLE,SCALAR,LENGTH,OFFSET X<sysread> =item sysread FILEHANDLE,SCALAR,LENGTH =for Pod::Functions fixed-length unbuffered input from a filehandle Attempts to read LENGTH bytes of data into variable SCALAR from the specified FILEHANDLE, using L<read(2)>. It bypasses any L<PerlIO> layers including buffered IO (but is affected by the presence of the C<:utf8> layer as described later), so mixing this with other kinds of reads, L<C<print>|/print FILEHANDLE LIST>, L<C<write>|/write FILEHANDLE>, L<C<seek>|/seek FILEHANDLE,POSITION,WHENCE>, L<C<tell>|/tell FILEHANDLE>, or L<C<eof>|/eof FILEHANDLE> can cause confusion because the C<:perlio> or C<:crlf> layers usually buffer data. Returns the number of bytes actually read, C<0> at end of file, or undef if there was an error (in the latter case L<C<$!>|perlvar/$!> is also set). SCALAR will be grown or shrunk so that the last byte actually read is the last byte of the scalar after the read. An OFFSET may be specified to place the read data at some place in the string other than the beginning. A negative OFFSET specifies placement at that many characters counting backwards from the end of the string. A positive OFFSET greater than the length of SCALAR results in the string being padded to the required size with C<"\0"> bytes before the result of the read is appended. There is no syseof() function, which is ok, since L<C<eof>|/eof FILEHANDLE> doesn't work well on device files (like ttys) anyway. Use L<C<sysread>|/sysread FILEHANDLE,SCALAR,LENGTH,OFFSET> and check for a return value of 0 to decide whether you're done. Note that if the filehandle has been marked as C<:utf8>, C<sysread> will throw an exception. The C<:encoding(...)> layer implicitly introduces the C<:utf8> layer. See L<C<binmode>|/binmode FILEHANDLE, LAYER>, L<C<open>|/open FILEHANDLE,MODE,EXPR>, and the L<open> pragma. =item sysseek FILEHANDLE,POSITION,WHENCE X<sysseek> X<lseek> =for Pod::Functions +5.004 position I/O pointer on handle used with sysread and syswrite Sets FILEHANDLE's system position I<in bytes> using L<lseek(2)>. FILEHANDLE may be an expression whose value gives the name of the filehandle. The values for WHENCE are C<0> to set the new position to POSITION; C<1> to set it to the current position plus POSITION; and C<2> to set it to EOF plus POSITION, typically negative. Note the emphasis on bytes: even if the filehandle has been set to operate on characters (for example using the C<:encoding(UTF-8)> I/O layer), the L<C<seek>|/seek FILEHANDLE,POSITION,WHENCE>, L<C<tell>|/tell FILEHANDLE>, and L<C<sysseek>|/sysseek FILEHANDLE,POSITION,WHENCE> family of functions use byte offsets, not character offsets, because seeking to a character offset would be very slow in a UTF-8 file. L<C<sysseek>|/sysseek FILEHANDLE,POSITION,WHENCE> bypasses normal buffered IO, so mixing it with reads other than L<C<sysread>|/sysread FILEHANDLE,SCALAR,LENGTH,OFFSET> (for example L<C<readline>|/readline EXPR> or L<C<read>|/read FILEHANDLE,SCALAR,LENGTH,OFFSET>), L<C<print>|/print FILEHANDLE LIST>, L<C<write>|/write FILEHANDLE>, L<C<seek>|/seek FILEHANDLE,POSITION,WHENCE>, L<C<tell>|/tell FILEHANDLE>, or L<C<eof>|/eof FILEHANDLE> may cause confusion. For WHENCE, you may also use the constants C<SEEK_SET>, C<SEEK_CUR>, and C<SEEK_END> (start of the file, current position, end of the file) from the L<Fcntl> module. Use of the constants is also more portable than relying on 0, 1, and 2. For example to define a "systell" function: use Fcntl 'SEEK_CUR'; sub systell { sysseek($_[0], 0, SEEK_CUR) } Returns the new position, or the undefined value on failure. A position of zero is returned as the string C<"0 but true">; thus L<C<sysseek>|/sysseek FILEHANDLE,POSITION,WHENCE> returns true on success and false on failure, yet you can still easily determine the new position. =item system LIST X<system> X<shell> =item system PROGRAM LIST =for Pod::Functions run a separate program Does exactly the same thing as L<C<exec>|/exec LIST>, except that a fork is done first and the parent process waits for the child process to exit. Note that argument processing varies depending on the number of arguments. If there is more than one argument in LIST, or if LIST is an array with more than one value, starts the program given by the first element of the list with arguments given by the rest of the list. If there is only one scalar argument, the argument is checked for shell metacharacters, and if there are any, the entire argument is passed to the system's command shell for parsing (this is C</bin/sh -c> on Unix platforms, but varies on other platforms). If there are no shell metacharacters in the argument, it is split into words and passed directly to C<execvp>, which is more efficient. On Windows, only the C<system PROGRAM LIST> syntax will reliably avoid using the shell; C<system LIST>, even with more than one element, will fall back to the shell if the first spawn fails. Perl will attempt to flush all files opened for output before any operation that may do a fork, but this may not be supported on some platforms (see L<perlport>). To be safe, you may need to set L<C<$E<verbar>>|perlvar/$E<verbar>> (C<$AUTOFLUSH> in L<English>) or call the C<autoflush> method of L<C<IO::Handle>|IO::Handle/METHODS> on any open handles. The return value is the exit status of the program as returned by the L<C<wait>|/wait> call. To get the actual exit value, shift right by eight (see below). See also L<C<exec>|/exec LIST>. This is I<not> what you want to use to capture the output from a command; for that you should use merely backticks or L<C<qxE<sol>E<sol>>|/qxE<sol>STRINGE<sol>>, as described in L<perlop/"`STRING`">. Return value of -1 indicates a failure to start the program or an error of the L<wait(2)> system call (inspect L<C<$!>|perlvar/$!> for the reason). If you'd like to make L<C<system>|/system LIST> (and many other bits of Perl) die on error, have a look at the L<autodie> pragma. Like L<C<exec>|/exec LIST>, L<C<system>|/system LIST> allows you to lie to a program about its name if you use the C<system PROGRAM LIST> syntax. Again, see L<C<exec>|/exec LIST>. Since C<SIGINT> and C<SIGQUIT> are ignored during the execution of L<C<system>|/system LIST>, if you expect your program to terminate on receipt of these signals you will need to arrange to do so yourself based on the return value. my @args = ("command", "arg1", "arg2"); system(@args) == 0 or die "system @args failed: $?"; If you'd like to manually inspect L<C<system>|/system LIST>'s failure, you can check all possible failure modes by inspecting L<C<$?>|perlvar/$?> like this: if ($? == -1) { print "failed to execute: $!\n"; } elsif ($? & 127) { printf "child died with signal %d, %s coredump\n", ($? & 127), ($? & 128) ? 'with' : 'without'; } else { printf "child exited with value %d\n", $? >> 8; } Alternatively, you may inspect the value of L<C<${^CHILD_ERROR_NATIVE}>|perlvar/${^CHILD_ERROR_NATIVE}> with the L<C<W*()>|POSIX/C<WIFEXITED>> calls from the L<POSIX> module. When L<C<system>|/system LIST>'s arguments are executed indirectly by the shell, results and return codes are subject to its quirks. See L<perlop/"`STRING`"> and L<C<exec>|/exec LIST> for details. Since L<C<system>|/system LIST> does a L<C<fork>|/fork> and L<C<wait>|/wait> it may affect a C<SIGCHLD> handler. See L<perlipc> for details. Portability issues: L<perlport/system>. =item syswrite FILEHANDLE,SCALAR,LENGTH,OFFSET X<syswrite> =item syswrite FILEHANDLE,SCALAR,LENGTH =item syswrite FILEHANDLE,SCALAR =for Pod::Functions fixed-length unbuffered output to a filehandle Attempts to write LENGTH bytes of data from variable SCALAR to the specified FILEHANDLE, using L<write(2)>. If LENGTH is not specified, writes whole SCALAR. It bypasses any L<PerlIO> layers including buffered IO (but is affected by the presence of the C<:utf8> layer as described later), so mixing this with reads (other than C<sysread)>), L<C<print>|/print FILEHANDLE LIST>, L<C<write>|/write FILEHANDLE>, L<C<seek>|/seek FILEHANDLE,POSITION,WHENCE>, L<C<tell>|/tell FILEHANDLE>, or L<C<eof>|/eof FILEHANDLE> may cause confusion because the C<:perlio> and C<:crlf> layers usually buffer data. Returns the number of bytes actually written, or L<C<undef>|/undef EXPR> if there was an error (in this case the errno variable L<C<$!>|perlvar/$!> is also set). If the LENGTH is greater than the data available in the SCALAR after the OFFSET, only as much data as is available will be written. An OFFSET may be specified to write the data from some part of the string other than the beginning. A negative OFFSET specifies writing that many characters counting backwards from the end of the string. If SCALAR is of length zero, you can only use an OFFSET of 0. B<WARNING>: If the filehandle is marked C<:utf8>, C<syswrite> will raise an exception. The C<:encoding(...)> layer implicitly introduces the C<:utf8> layer. Alternately, if the handle is not marked with an encoding but you attempt to write characters with code points over 255, raises an exception. See L<C<binmode>|/binmode FILEHANDLE, LAYER>, L<C<open>|/open FILEHANDLE,MODE,EXPR>, and the L<open> pragma. =item tell FILEHANDLE X<tell> =item tell =for Pod::Functions get current seekpointer on a filehandle Returns the current position I<in bytes> for FILEHANDLE, or -1 on error. FILEHANDLE may be an expression whose value gives the name of the actual filehandle. If FILEHANDLE is omitted, assumes the file last read. Note the emphasis on bytes: even if the filehandle has been set to operate on characters (for example using the C<:encoding(UTF-8)> I/O layer), the L<C<seek>|/seek FILEHANDLE,POSITION,WHENCE>, L<C<tell>|/tell FILEHANDLE>, and L<C<sysseek>|/sysseek FILEHANDLE,POSITION,WHENCE> family of functions use byte offsets, not character offsets, because seeking to a character offset would be very slow in a UTF-8 file. The return value of L<C<tell>|/tell FILEHANDLE> for the standard streams like the STDIN depends on the operating system: it may return -1 or something else. L<C<tell>|/tell FILEHANDLE> on pipes, fifos, and sockets usually returns -1. There is no C<systell> function. Use L<C<sysseek($fh, 0, 1)>|/sysseek FILEHANDLE,POSITION,WHENCE> for that. Do not use L<C<tell>|/tell FILEHANDLE> (or other buffered I/O operations) on a filehandle that has been manipulated by L<C<sysread>|/sysread FILEHANDLE,SCALAR,LENGTH,OFFSET>, L<C<syswrite>|/syswrite FILEHANDLE,SCALAR,LENGTH,OFFSET>, or L<C<sysseek>|/sysseek FILEHANDLE,POSITION,WHENCE>. Those functions ignore the buffering, while L<C<tell>|/tell FILEHANDLE> does not. =item telldir DIRHANDLE X<telldir> =for Pod::Functions get current seekpointer on a directory handle Returns the current position of the L<C<readdir>|/readdir DIRHANDLE> routines on DIRHANDLE. Value may be given to L<C<seekdir>|/seekdir DIRHANDLE,POS> to access a particular location in a directory. L<C<telldir>|/telldir DIRHANDLE> has the same caveats about possible directory compaction as the corresponding system library routine. =item tie VARIABLE,CLASSNAME,LIST X<tie> =for Pod::Functions +5.002 bind a variable to an object class This function binds a variable to a package class that will provide the implementation for the variable. VARIABLE is the name of the variable to be enchanted. CLASSNAME is the name of a class implementing objects of correct type. Any additional arguments are passed to the appropriate constructor method of the class (meaning C<TIESCALAR>, C<TIEHANDLE>, C<TIEARRAY>, or C<TIEHASH>). Typically these are arguments such as might be passed to the L<dbm_open(3)> function of C. The object returned by the constructor is also returned by the L<C<tie>|/tie VARIABLE,CLASSNAME,LIST> function, which would be useful if you want to access other methods in CLASSNAME. Note that functions such as L<C<keys>|/keys HASH> and L<C<values>|/values HASH> may return huge lists when used on large objects, like DBM files. You may prefer to use the L<C<each>|/each HASH> function to iterate over such. Example: # print out history file offsets use NDBM_File; tie(my %HIST, 'NDBM_File', '/usr/lib/news/history', 1, 0); while (my ($key,$val) = each %HIST) { print $key, ' = ', unpack('L', $val), "\n"; } A class implementing a hash should have the following methods: TIEHASH classname, LIST FETCH this, key STORE this, key, value DELETE this, key CLEAR this EXISTS this, key FIRSTKEY this NEXTKEY this, lastkey SCALAR this DESTROY this UNTIE this A class implementing an ordinary array should have the following methods: TIEARRAY classname, LIST FETCH this, key STORE this, key, value FETCHSIZE this STORESIZE this, count CLEAR this PUSH this, LIST POP this SHIFT this UNSHIFT this, LIST SPLICE this, offset, length, LIST EXTEND this, count DELETE this, key EXISTS this, key DESTROY this UNTIE this A class implementing a filehandle should have the following methods: TIEHANDLE classname, LIST READ this, scalar, length, offset READLINE this GETC this WRITE this, scalar, length, offset PRINT this, LIST PRINTF this, format, LIST BINMODE this EOF this FILENO this SEEK this, position, whence TELL this OPEN this, mode, LIST CLOSE this DESTROY this UNTIE this A class implementing a scalar should have the following methods: TIESCALAR classname, LIST FETCH this, STORE this, value DESTROY this UNTIE this Not all methods indicated above need be implemented. See L<perltie>, L<Tie::Hash>, L<Tie::Array>, L<Tie::Scalar>, and L<Tie::Handle>. Unlike L<C<dbmopen>|/dbmopen HASH,DBNAME,MASK>, the L<C<tie>|/tie VARIABLE,CLASSNAME,LIST> function will not L<C<use>|/use Module VERSION LIST> or L<C<require>|/require VERSION> a module for you; you need to do that explicitly yourself. See L<DB_File> or the L<Config> module for interesting L<C<tie>|/tie VARIABLE,CLASSNAME,LIST> implementations. For further details see L<perltie>, L<C<tied>|/tied VARIABLE>. =item tied VARIABLE X<tied> =for Pod::Functions get a reference to the object underlying a tied variable Returns a reference to the object underlying VARIABLE (the same value that was originally returned by the L<C<tie>|/tie VARIABLE,CLASSNAME,LIST> call that bound the variable to a package.) Returns the undefined value if VARIABLE isn't tied to a package. =item time X<time> X<epoch> =for Pod::Functions return number of seconds since 1970 Returns the number of non-leap seconds since whatever time the system considers to be the epoch, suitable for feeding to L<C<gmtime>|/gmtime EXPR> and L<C<localtime>|/localtime EXPR>. On most systems the epoch is 00:00:00 UTC, January 1, 1970; a prominent exception being Mac OS Classic which uses 00:00:00, January 1, 1904 in the current local time zone for its epoch. For measuring time in better granularity than one second, use the L<Time::HiRes> module from Perl 5.8 onwards (or from CPAN before then), or, if you have L<gettimeofday(2)>, you may be able to use the L<C<syscall>|/syscall NUMBER, LIST> interface of Perl. See L<perlfaq8> for details. For date and time processing look at the many related modules on CPAN. For a comprehensive date and time representation look at the L<DateTime> module. =item times X<times> =for Pod::Functions return elapsed time for self and child processes Returns a four-element list giving the user and system times in seconds for this process and any exited children of this process. my ($user,$system,$cuser,$csystem) = times; In scalar context, L<C<times>|/times> returns C<$user>. Children's times are only included for terminated children. Portability issues: L<perlport/times>. =item tr/// =for Pod::Functions transliterate a string The transliteration operator. Same as L<C<yE<sol>E<sol>E<sol>>|/yE<sol>E<sol>E<sol>>. See L<perlop/"Quote-Like Operators">. =item truncate FILEHANDLE,LENGTH X<truncate> =item truncate EXPR,LENGTH =for Pod::Functions shorten a file Truncates the file opened on FILEHANDLE, or named by EXPR, to the specified length. Raises an exception if truncate isn't implemented on your system. Returns true if successful, L<C<undef>|/undef EXPR> on error. The behavior is undefined if LENGTH is greater than the length of the file. The position in the file of FILEHANDLE is left unchanged. You may want to call L<seek|/"seek FILEHANDLE,POSITION,WHENCE"> before writing to the file. Portability issues: L<perlport/truncate>. =item uc EXPR X<uc> X<uppercase> X<toupper> =item uc =for Pod::Functions return upper-case version of a string Returns an uppercased version of EXPR. This is the internal function implementing the C<\U> escape in double-quoted strings. It does not attempt to do titlecase mapping on initial letters. See L<C<ucfirst>|/ucfirst EXPR> for that. If EXPR is omitted, uses L<C<$_>|perlvar/$_>. This function behaves the same way under various pragmas, such as in a locale, as L<C<lc>|/lc EXPR> does. =item ucfirst EXPR X<ucfirst> X<uppercase> =item ucfirst =for Pod::Functions return a string with just the next letter in upper case Returns the value of EXPR with the first character in uppercase (titlecase in Unicode). This is the internal function implementing the C<\u> escape in double-quoted strings. If EXPR is omitted, uses L<C<$_>|perlvar/$_>. This function behaves the same way under various pragmas, such as in a locale, as L<C<lc>|/lc EXPR> does. =item umask EXPR X<umask> =item umask =for Pod::Functions set file creation mode mask Sets the umask for the process to EXPR and returns the previous value. If EXPR is omitted, merely returns the current umask. The Unix permission C<rwxr-x---> is represented as three sets of three bits, or three octal digits: C<0750> (the leading 0 indicates octal and isn't one of the digits). The L<C<umask>|/umask EXPR> value is such a number representing disabled permissions bits. The permission (or "mode") values you pass L<C<mkdir>|/mkdir FILENAME,MODE> or L<C<sysopen>|/sysopen FILEHANDLE,FILENAME,MODE> are modified by your umask, so even if you tell L<C<sysopen>|/sysopen FILEHANDLE,FILENAME,MODE> to create a file with permissions C<0777>, if your umask is C<0022>, then the file will actually be created with permissions C<0755>. If your L<C<umask>|/umask EXPR> were C<0027> (group can't write; others can't read, write, or execute), then passing L<C<sysopen>|/sysopen FILEHANDLE,FILENAME,MODE> C<0666> would create a file with mode C<0640> (because C<0666 &~ 027> is C<0640>). Here's some advice: supply a creation mode of C<0666> for regular files (in L<C<sysopen>|/sysopen FILEHANDLE,FILENAME,MODE>) and one of C<0777> for directories (in L<C<mkdir>|/mkdir FILENAME,MODE>) and executable files. This gives users the freedom of choice: if they want protected files, they might choose process umasks of C<022>, C<027>, or even the particularly antisocial mask of C<077>. Programs should rarely if ever make policy decisions better left to the user. The exception to this is when writing files that should be kept private: mail files, web browser cookies, F<.rhosts> files, and so on. If L<umask(2)> is not implemented on your system and you are trying to restrict access for I<yourself> (i.e., C<< (EXPR & 0700) > 0 >>), raises an exception. If L<umask(2)> is not implemented and you are not trying to restrict access for yourself, returns L<C<undef>|/undef EXPR>. Remember that a umask is a number, usually given in octal; it is I<not> a string of octal digits. See also L<C<oct>|/oct EXPR>, if all you have is a string. Portability issues: L<perlport/umask>. =item undef EXPR X<undef> X<undefine> =item undef =for Pod::Functions remove a variable or function definition Undefines the value of EXPR, which must be an lvalue. Use only on a scalar value, an array (using C<@>), a hash (using C<%>), a subroutine (using C<&>), or a typeglob (using C<*>). Saying C<undef $hash{$key}> will probably not do what you expect on most predefined variables or DBM list values, so don't do that; see L<C<delete>|/delete EXPR>. Always returns the undefined value. You can omit the EXPR, in which case nothing is undefined, but you still get an undefined value that you could, for instance, return from a subroutine, assign to a variable, or pass as a parameter. Examples: undef $foo; undef $bar{'blurfl'}; # Compare to: delete $bar{'blurfl'}; undef @ary; undef %hash; undef &mysub; undef *xyz; # destroys $xyz, @xyz, %xyz, &xyz, etc. return (wantarray ? (undef, $errmsg) : undef) if $they_blew_it; select undef, undef, undef, 0.25; my ($x, $y, undef, $z) = foo(); # Ignore third value returned Note that this is a unary operator, not a list operator. =item unlink LIST X<unlink> X<delete> X<remove> X<rm> X<del> =item unlink =for Pod::Functions remove one link to a file Deletes a list of files. On success, it returns the number of files it successfully deleted. On failure, it returns false and sets L<C<$!>|perlvar/$!> (errno): my $unlinked = unlink 'a', 'b', 'c'; unlink @goners; unlink glob "*.bak"; On error, L<C<unlink>|/unlink LIST> will not tell you which files it could not remove. If you want to know which files you could not remove, try them one at a time: foreach my $file ( @goners ) { unlink $file or warn "Could not unlink $file: $!"; } Note: L<C<unlink>|/unlink LIST> will not attempt to delete directories unless you are superuser and the B<-U> flag is supplied to Perl. Even if these conditions are met, be warned that unlinking a directory can inflict damage on your filesystem. Finally, using L<C<unlink>|/unlink LIST> on directories is not supported on many operating systems. Use L<C<rmdir>|/rmdir FILENAME> instead. If LIST is omitted, L<C<unlink>|/unlink LIST> uses L<C<$_>|perlvar/$_>. =item unpack TEMPLATE,EXPR X<unpack> =item unpack TEMPLATE =for Pod::Functions convert binary structure into normal perl variables L<C<unpack>|/unpack TEMPLATE,EXPR> does the reverse of L<C<pack>|/pack TEMPLATE,LIST>: it takes a string and expands it out into a list of values. (In scalar context, it returns merely the first value produced.) If EXPR is omitted, unpacks the L<C<$_>|perlvar/$_> string. See L<perlpacktut> for an introduction to this function. The string is broken into chunks described by the TEMPLATE. Each chunk is converted separately to a value. Typically, either the string is a result of L<C<pack>|/pack TEMPLATE,LIST>, or the characters of the string represent a C structure of some kind. The TEMPLATE has the same format as in the L<C<pack>|/pack TEMPLATE,LIST> function. Here's a subroutine that does substring: sub substr { my ($what, $where, $howmuch) = @_; unpack("x$where a$howmuch", $what); } and then there's sub ordinal { unpack("W",$_[0]); } # same as ord() In addition to fields allowed in L<C<pack>|/pack TEMPLATE,LIST>, you may prefix a field with a %<number> to indicate that you want a <number>-bit checksum of the items instead of the items themselves. Default is a 16-bit checksum. The checksum is calculated by summing numeric values of expanded values (for string fields the sum of C<ord($char)> is taken; for bit fields the sum of zeroes and ones). For example, the following computes the same number as the System V sum program: my $checksum = do { local $/; # slurp! unpack("%32W*", readline) % 65535; }; The following efficiently counts the number of set bits in a bit vector: my $setbits = unpack("%32b*", $selectmask); The C<p> and C<P> formats should be used with care. Since Perl has no way of checking whether the value passed to L<C<unpack>|/unpack TEMPLATE,EXPR> corresponds to a valid memory location, passing a pointer value that's not known to be valid is likely to have disastrous consequences. If there are more pack codes or if the repeat count of a field or a group is larger than what the remainder of the input string allows, the result is not well defined: the repeat count may be decreased, or L<C<unpack>|/unpack TEMPLATE,EXPR> may produce empty strings or zeros, or it may raise an exception. If the input string is longer than one described by the TEMPLATE, the remainder of that input string is ignored. See L<C<pack>|/pack TEMPLATE,LIST> for more examples and notes. =item unshift ARRAY,LIST X<unshift> =for Pod::Functions prepend more elements to the beginning of a list Does the opposite of a L<C<shift>|/shift ARRAY>. Or the opposite of a L<C<push>|/push ARRAY,LIST>, depending on how you look at it. Prepends list to the front of the array and returns the new number of elements in the array. unshift(@ARGV, '-e') unless $ARGV[0] =~ /^-/; Note the LIST is prepended whole, not one element at a time, so the prepended elements stay in the same order. Use L<C<reverse>|/reverse LIST> to do the reverse. Starting with Perl 5.14, an experimental feature allowed L<C<unshift>|/unshift ARRAY,LIST> to take a scalar expression. This experiment has been deemed unsuccessful, and was removed as of Perl 5.24. =item untie VARIABLE X<untie> =for Pod::Functions break a tie binding to a variable Breaks the binding between a variable and a package. (See L<tie|/tie VARIABLE,CLASSNAME,LIST>.) Has no effect if the variable is not tied. =item use Module VERSION LIST X<use> X<module> X<import> =item use Module VERSION =item use Module LIST =item use Module =item use VERSION =for Pod::Functions load in a module at compile time and import its namespace Imports some semantics into the current package from the named module, generally by aliasing certain subroutine or variable names into your package. It is exactly equivalent to BEGIN { require Module; Module->import( LIST ); } except that Module I<must> be a bareword. The importation can be made conditional by using the L<if> module. In the C<use VERSION> form, VERSION may be either a v-string such as v5.24.1, which will be compared to L<C<$^V>|perlvar/$^V> (aka $PERL_VERSION), or a numeric argument of the form 5.024001, which will be compared to L<C<$]>|perlvar/$]>. An exception is raised if VERSION is greater than the version of the current Perl interpreter; Perl will not attempt to parse the rest of the file. Compare with L<C<require>|/require VERSION>, which can do a similar check at run time. Symmetrically, C<no VERSION> allows you to specify that you want a version of Perl older than the specified one. Specifying VERSION as a numeric argument of the form 5.024001 should generally be avoided as older less readable syntax compared to v5.24.1. Before perl 5.8.0 released in 2002 the more verbose numeric form was the only supported syntax, which is why you might see it in use v5.24.1; # compile time version check use 5.24.1; # ditto use 5.024_001; # ditto; older syntax compatible with perl 5.6 This is often useful if you need to check the current Perl version before L<C<use>|/use Module VERSION LIST>ing library modules that won't work with older versions of Perl. (We try not to do this more than we have to.) C<use VERSION> also lexically enables all features available in the requested version as defined by the L<feature> pragma, disabling any features not in the requested version's feature bundle. See L<feature>. Similarly, if the specified Perl version is greater than or equal to 5.12.0, strictures are enabled lexically as with L<C<use strict>|strict>. Any explicit use of C<use strict> or C<no strict> overrides C<use VERSION>, even if it comes before it. Later use of C<use VERSION> will override all behavior of a previous C<use VERSION>, possibly removing the C<strict> and C<feature> added by C<use VERSION>. C<use VERSION> does not load the F<feature.pm> or F<strict.pm> files. The C<BEGIN> forces the L<C<require>|/require VERSION> and L<C<import>|/import LIST> to happen at compile time. The L<C<require>|/require VERSION> makes sure the module is loaded into memory if it hasn't been yet. The L<C<import>|/import LIST> is not a builtin; it's just an ordinary static method call into the C<Module> package to tell the module to import the list of features back into the current package. The module can implement its L<C<import>|/import LIST> method any way it likes, though most modules just choose to derive their L<C<import>|/import LIST> method via inheritance from the C<Exporter> class that is defined in the L<C<Exporter>|Exporter> module. See L<Exporter>. If no L<C<import>|/import LIST> method can be found, then the call is skipped, even if there is an AUTOLOAD method. If you do not want to call the package's L<C<import>|/import LIST> method (for instance, to stop your namespace from being altered), explicitly supply the empty list: use Module (); That is exactly equivalent to BEGIN { require Module } If the VERSION argument is present between Module and LIST, then the L<C<use>|/use Module VERSION LIST> will call the C<VERSION> method in class Module with the given version as an argument: use Module 12.34; is equivalent to: BEGIN { require Module; Module->VERSION(12.34) } The L<default C<VERSION> method|UNIVERSAL/C<VERSION ( [ REQUIRE ] )>>, inherited from the L<C<UNIVERSAL>|UNIVERSAL> class, croaks if the given version is larger than the value of the variable C<$Module::VERSION>. The VERSION argument cannot be an arbitrary expression. It only counts as a VERSION argument if it is a version number literal, starting with either a digit or C<v> followed by a digit. Anything that doesn't look like a version literal will be parsed as the start of the LIST. Nevertheless, many attempts to use an arbitrary expression as a VERSION argument will appear to work, because L<Exporter>'s C<import> method handles numeric arguments specially, performing version checks rather than treating them as things to export. Again, there is a distinction between omitting LIST (L<C<import>|/import LIST> called with no arguments) and an explicit empty LIST C<()> (L<C<import>|/import LIST> not called). Note that there is no comma after VERSION! Because this is a wide-open interface, pragmas (compiler directives) are also implemented this way. Some of the currently implemented pragmas are: use constant; use diagnostics; use integer; use sigtrap qw(SEGV BUS); use strict qw(subs vars refs); use subs qw(afunc blurfl); use warnings qw(all); use sort qw(stable); Some of these pseudo-modules import semantics into the current block scope (like L<C<strict>|strict> or L<C<integer>|integer>, unlike ordinary modules, which import symbols into the current package (which are effective through the end of the file). Because L<C<use>|/use Module VERSION LIST> takes effect at compile time, it doesn't respect the ordinary flow control of the code being compiled. In particular, putting a L<C<use>|/use Module VERSION LIST> inside the false branch of a conditional doesn't prevent it from being processed. If a module or pragma only needs to be loaded conditionally, this can be done using the L<if> pragma: use if $] < 5.008, "utf8"; use if WANT_WARNINGS, warnings => qw(all); There's a corresponding L<C<no>|/no MODULE VERSION LIST> declaration that unimports meanings imported by L<C<use>|/use Module VERSION LIST>, i.e., it calls C<< Module->unimport(LIST) >> instead of L<C<import>|/import LIST>. It behaves just as L<C<import>|/import LIST> does with VERSION, an omitted or empty LIST, or no unimport method being found. no integer; no strict 'refs'; no warnings; Care should be taken when using the C<no VERSION> form of L<C<no>|/no MODULE VERSION LIST>. It is I<only> meant to be used to assert that the running Perl is of a earlier version than its argument and I<not> to undo the feature-enabling side effects of C<use VERSION>. See L<perlmodlib> for a list of standard modules and pragmas. See L<perlrun|perlrun/-m[-]module> for the C<-M> and C<-m> command-line options to Perl that give L<C<use>|/use Module VERSION LIST> functionality from the command-line. =item utime LIST X<utime> =for Pod::Functions set a file's last access and modify times Changes the access and modification times on each file of a list of files. The first two elements of the list must be the NUMERIC access and modification times, in that order. Returns the number of files successfully changed. The inode change time of each file is set to the current time. For example, this code has the same effect as the Unix L<touch(1)> command when the files I<already exist> and belong to the user running the program: #!/usr/bin/perl my $atime = my $mtime = time; utime $atime, $mtime, @ARGV; Since Perl 5.8.0, if the first two elements of the list are L<C<undef>|/undef EXPR>, the L<utime(2)> syscall from your C library is called with a null second argument. On most systems, this will set the file's access and modification times to the current time (i.e., equivalent to the example above) and will work even on files you don't own provided you have write permission: for my $file (@ARGV) { utime(undef, undef, $file) || warn "Couldn't touch $file: $!"; } Under NFS this will use the time of the NFS server, not the time of the local machine. If there is a time synchronization problem, the NFS server and local machine will have different times. The Unix L<touch(1)> command will in fact normally use this form instead of the one shown in the first example. Passing only one of the first two elements as L<C<undef>|/undef EXPR> is equivalent to passing a 0 and will not have the effect described when both are L<C<undef>|/undef EXPR>. This also triggers an uninitialized warning. On systems that support L<futimes(2)>, you may pass filehandles among the files. On systems that don't support L<futimes(2)>, passing filehandles raises an exception. Filehandles must be passed as globs or glob references to be recognized; barewords are considered filenames. Portability issues: L<perlport/utime>. =item values HASH X<values> =item values ARRAY =for Pod::Functions return a list of the values in a hash In list context, returns a list consisting of all the values of the named hash. In Perl 5.12 or later only, will also return a list of the values of an array; prior to that release, attempting to use an array argument will produce a syntax error. In scalar context, returns the number of values. Hash entries are returned in an apparently random order. The actual random order is specific to a given hash; the exact same series of operations on two hashes may result in a different order for each hash. Any insertion into the hash may change the order, as will any deletion, with the exception that the most recent key returned by L<C<each>|/each HASH> or L<C<keys>|/keys HASH> may be deleted without changing the order. So long as a given hash is unmodified you may rely on L<C<keys>|/keys HASH>, L<C<values>|/values HASH> and L<C<each>|/each HASH> to repeatedly return the same order as each other. See L<perlsec/"Algorithmic Complexity Attacks"> for details on why hash order is randomized. Aside from the guarantees provided here the exact details of Perl's hash algorithm and the hash traversal order are subject to change in any release of Perl. Tied hashes may behave differently to Perl's hashes with respect to changes in order on insertion and deletion of items. As a side effect, calling L<C<values>|/values HASH> resets the HASH or ARRAY's internal iterator (see L<C<each>|/each HASH>) before yielding the values. In particular, calling L<C<values>|/values HASH> in void context resets the iterator with no other overhead. Apart from resetting the iterator, C<values @array> in list context is the same as plain C<@array>. (We recommend that you use void context C<keys @array> for this, but reasoned that taking C<values @array> out would require more documentation than leaving it in.) Note that the values are not copied, which means modifying them will modify the contents of the hash: for (values %hash) { s/foo/bar/g } # modifies %hash values for (@hash{keys %hash}) { s/foo/bar/g } # same Starting with Perl 5.14, an experimental feature allowed L<C<values>|/values HASH> to take a scalar expression. This experiment has been deemed unsuccessful, and was removed as of Perl 5.24. To avoid confusing would-be users of your code who are running earlier versions of Perl with mysterious syntax errors, put this sort of thing at the top of your file to signal that your code will work I<only> on Perls of a recent vintage: use 5.012; # so keys/values/each work on arrays See also L<C<keys>|/keys HASH>, L<C<each>|/each HASH>, and L<C<sort>|/sort SUBNAME LIST>. =item vec EXPR,OFFSET,BITS X<vec> X<bit> X<bit vector> =for Pod::Functions test or set particular bits in a string Treats the string in EXPR as a bit vector made up of elements of width BITS and returns the value of the element specified by OFFSET as an unsigned integer. BITS therefore specifies the number of bits that are reserved for each element in the bit vector. This must be a power of two from 1 to 32 (or 64, if your platform supports that). If BITS is 8, "elements" coincide with bytes of the input string. If BITS is 16 or more, bytes of the input string are grouped into chunks of size BITS/8, and each group is converted to a number as with L<C<pack>|/pack TEMPLATE,LIST>/L<C<unpack>|/unpack TEMPLATE,EXPR> with big-endian formats C<n>/C<N> (and analogously for BITS==64). See L<C<pack>|/pack TEMPLATE,LIST> for details. If bits is 4 or less, the string is broken into bytes, then the bits of each byte are broken into 8/BITS groups. Bits of a byte are numbered in a little-endian-ish way, as in C<0x01>, C<0x02>, C<0x04>, C<0x08>, C<0x10>, C<0x20>, C<0x40>, C<0x80>. For example, breaking the single input byte C<chr(0x36)> into two groups gives a list C<(0x6, 0x3)>; breaking it into 4 groups gives C<(0x2, 0x1, 0x3, 0x0)>. L<C<vec>|/vec EXPR,OFFSET,BITS> may also be assigned to, in which case parentheses are needed to give the expression the correct precedence as in vec($image, $max_x * $x + $y, 8) = 3; If the selected element is outside the string, the value 0 is returned. If an element off the end of the string is written to, Perl will first extend the string with sufficiently many zero bytes. It is an error to try to write off the beginning of the string (i.e., negative OFFSET). If the string happens to be encoded as UTF-8 internally (and thus has the UTF8 flag set), L<C<vec>|/vec EXPR,OFFSET,BITS> tries to convert it to use a one-byte-per-character internal representation. However, if the string contains characters with values of 256 or higher, a fatal error will occur. Strings created with L<C<vec>|/vec EXPR,OFFSET,BITS> can also be manipulated with the logical operators C<|>, C<&>, C<^>, and C<~>. These operators will assume a bit vector operation is desired when both operands are strings. See L<perlop/"Bitwise String Operators">. The following code will build up an ASCII string saying C<'PerlPerlPerl'>. The comments show the string after each step. Note that this code works in the same way on big-endian or little-endian machines. my $foo = ''; vec($foo, 0, 32) = 0x5065726C; # 'Perl' # $foo eq "Perl" eq "\x50\x65\x72\x6C", 32 bits print vec($foo, 0, 8); # prints 80 == 0x50 == ord('P') vec($foo, 2, 16) = 0x5065; # 'PerlPe' vec($foo, 3, 16) = 0x726C; # 'PerlPerl' vec($foo, 8, 8) = 0x50; # 'PerlPerlP' vec($foo, 9, 8) = 0x65; # 'PerlPerlPe' vec($foo, 20, 4) = 2; # 'PerlPerlPe' . "\x02" vec($foo, 21, 4) = 7; # 'PerlPerlPer' # 'r' is "\x72" vec($foo, 45, 2) = 3; # 'PerlPerlPer' . "\x0c" vec($foo, 93, 1) = 1; # 'PerlPerlPer' . "\x2c" vec($foo, 94, 1) = 1; # 'PerlPerlPerl' # 'l' is "\x6c" To transform a bit vector into a string or list of 0's and 1's, use these: my $bits = unpack("b*", $vector); my @bits = split(//, unpack("b*", $vector)); If you know the exact length in bits, it can be used in place of the C<*>. Here is an example to illustrate how the bits actually fall in place: #!/usr/bin/perl -wl print <<'EOT'; 0 1 2 3 unpack("V",$_) 01234567890123456789012345678901 ------------------------------------------------------------------ EOT for $w (0..3) { $width = 2**$w; for ($shift=0; $shift < $width; ++$shift) { for ($off=0; $off < 32/$width; ++$off) { $str = pack("B*", "0"x32); $bits = (1<<$shift); vec($str, $off, $width) = $bits; $res = unpack("b*",$str); $val = unpack("V", $str); write; } } } format STDOUT = vec($_,@#,@#) = @<< == @######### @>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> $off, $width, $bits, $val, $res . __END__ Regardless of the machine architecture on which it runs, the example above should print the following table: 0 1 2 3 unpack("V",$_) 01234567890123456789012345678901 ------------------------------------------------------------------ vec($_, 0, 1) = 1 == 1 10000000000000000000000000000000 vec($_, 1, 1) = 1 == 2 01000000000000000000000000000000 vec($_, 2, 1) = 1 == 4 00100000000000000000000000000000 vec($_, 3, 1) = 1 == 8 00010000000000000000000000000000 vec($_, 4, 1) = 1 == 16 00001000000000000000000000000000 vec($_, 5, 1) = 1 == 32 00000100000000000000000000000000 vec($_, 6, 1) = 1 == 64 00000010000000000000000000000000 vec($_, 7, 1) = 1 == 128 00000001000000000000000000000000 vec($_, 8, 1) = 1 == 256 00000000100000000000000000000000 vec($_, 9, 1) = 1 == 512 00000000010000000000000000000000 vec($_,10, 1) = 1 == 1024 00000000001000000000000000000000 vec($_,11, 1) = 1 == 2048 00000000000100000000000000000000 vec($_,12, 1) = 1 == 4096 00000000000010000000000000000000 vec($_,13, 1) = 1 == 8192 00000000000001000000000000000000 vec($_,14, 1) = 1 == 16384 00000000000000100000000000000000 vec($_,15, 1) = 1 == 32768 00000000000000010000000000000000 vec($_,16, 1) = 1 == 65536 00000000000000001000000000000000 vec($_,17, 1) = 1 == 131072 00000000000000000100000000000000 vec($_,18, 1) = 1 == 262144 00000000000000000010000000000000 vec($_,19, 1) = 1 == 524288 00000000000000000001000000000000 vec($_,20, 1) = 1 == 1048576 00000000000000000000100000000000 vec($_,21, 1) = 1 == 2097152 00000000000000000000010000000000 vec($_,22, 1) = 1 == 4194304 00000000000000000000001000000000 vec($_,23, 1) = 1 == 8388608 00000000000000000000000100000000 vec($_,24, 1) = 1 == 16777216 00000000000000000000000010000000 vec($_,25, 1) = 1 == 33554432 00000000000000000000000001000000 vec($_,26, 1) = 1 == 67108864 00000000000000000000000000100000 vec($_,27, 1) = 1 == 134217728 00000000000000000000000000010000 vec($_,28, 1) = 1 == 268435456 00000000000000000000000000001000 vec($_,29, 1) = 1 == 536870912 00000000000000000000000000000100 vec($_,30, 1) = 1 == 1073741824 00000000000000000000000000000010 vec($_,31, 1) = 1 == 2147483648 00000000000000000000000000000001 vec($_, 0, 2) = 1 == 1 10000000000000000000000000000000 vec($_, 1, 2) = 1 == 4 00100000000000000000000000000000 vec($_, 2, 2) = 1 == 16 00001000000000000000000000000000 vec($_, 3, 2) = 1 == 64 00000010000000000000000000000000 vec($_, 4, 2) = 1 == 256 00000000100000000000000000000000 vec($_, 5, 2) = 1 == 1024 00000000001000000000000000000000 vec($_, 6, 2) = 1 == 4096 00000000000010000000000000000000 vec($_, 7, 2) = 1 == 16384 00000000000000100000000000000000 vec($_, 8, 2) = 1 == 65536 00000000000000001000000000000000 vec($_, 9, 2) = 1 == 262144 00000000000000000010000000000000 vec($_,10, 2) = 1 == 1048576 00000000000000000000100000000000 vec($_,11, 2) = 1 == 4194304 00000000000000000000001000000000 vec($_,12, 2) = 1 == 16777216 00000000000000000000000010000000 vec($_,13, 2) = 1 == 67108864 00000000000000000000000000100000 vec($_,14, 2) = 1 == 268435456 00000000000000000000000000001000 vec($_,15, 2) = 1 == 1073741824 00000000000000000000000000000010 vec($_, 0, 2) = 2 == 2 01000000000000000000000000000000 vec($_, 1, 2) = 2 == 8 00010000000000000000000000000000 vec($_, 2, 2) = 2 == 32 00000100000000000000000000000000 vec($_, 3, 2) = 2 == 128 00000001000000000000000000000000 vec($_, 4, 2) = 2 == 512 00000000010000000000000000000000 vec($_, 5, 2) = 2 == 2048 00000000000100000000000000000000 vec($_, 6, 2) = 2 == 8192 00000000000001000000000000000000 vec($_, 7, 2) = 2 == 32768 00000000000000010000000000000000 vec($_, 8, 2) = 2 == 131072 00000000000000000100000000000000 vec($_, 9, 2) = 2 == 524288 00000000000000000001000000000000 vec($_,10, 2) = 2 == 2097152 00000000000000000000010000000000 vec($_,11, 2) = 2 == 8388608 00000000000000000000000100000000 vec($_,12, 2) = 2 == 33554432 00000000000000000000000001000000 vec($_,13, 2) = 2 == 134217728 00000000000000000000000000010000 vec($_,14, 2) = 2 == 536870912 00000000000000000000000000000100 vec($_,15, 2) = 2 == 2147483648 00000000000000000000000000000001 vec($_, 0, 4) = 1 == 1 10000000000000000000000000000000 vec($_, 1, 4) = 1 == 16 00001000000000000000000000000000 vec($_, 2, 4) = 1 == 256 00000000100000000000000000000000 vec($_, 3, 4) = 1 == 4096 00000000000010000000000000000000 vec($_, 4, 4) = 1 == 65536 00000000000000001000000000000000 vec($_, 5, 4) = 1 == 1048576 00000000000000000000100000000000 vec($_, 6, 4) = 1 == 16777216 00000000000000000000000010000000 vec($_, 7, 4) = 1 == 268435456 00000000000000000000000000001000 vec($_, 0, 4) = 2 == 2 01000000000000000000000000000000 vec($_, 1, 4) = 2 == 32 00000100000000000000000000000000 vec($_, 2, 4) = 2 == 512 00000000010000000000000000000000 vec($_, 3, 4) = 2 == 8192 00000000000001000000000000000000 vec($_, 4, 4) = 2 == 131072 00000000000000000100000000000000 vec($_, 5, 4) = 2 == 2097152 00000000000000000000010000000000 vec($_, 6, 4) = 2 == 33554432 00000000000000000000000001000000 vec($_, 7, 4) = 2 == 536870912 00000000000000000000000000000100 vec($_, 0, 4) = 4 == 4 00100000000000000000000000000000 vec($_, 1, 4) = 4 == 64 00000010000000000000000000000000 vec($_, 2, 4) = 4 == 1024 00000000001000000000000000000000 vec($_, 3, 4) = 4 == 16384 00000000000000100000000000000000 vec($_, 4, 4) = 4 == 262144 00000000000000000010000000000000 vec($_, 5, 4) = 4 == 4194304 00000000000000000000001000000000 vec($_, 6, 4) = 4 == 67108864 00000000000000000000000000100000 vec($_, 7, 4) = 4 == 1073741824 00000000000000000000000000000010 vec($_, 0, 4) = 8 == 8 00010000000000000000000000000000 vec($_, 1, 4) = 8 == 128 00000001000000000000000000000000 vec($_, 2, 4) = 8 == 2048 00000000000100000000000000000000 vec($_, 3, 4) = 8 == 32768 00000000000000010000000000000000 vec($_, 4, 4) = 8 == 524288 00000000000000000001000000000000 vec($_, 5, 4) = 8 == 8388608 00000000000000000000000100000000 vec($_, 6, 4) = 8 == 134217728 00000000000000000000000000010000 vec($_, 7, 4) = 8 == 2147483648 00000000000000000000000000000001 vec($_, 0, 8) = 1 == 1 10000000000000000000000000000000 vec($_, 1, 8) = 1 == 256 00000000100000000000000000000000 vec($_, 2, 8) = 1 == 65536 00000000000000001000000000000000 vec($_, 3, 8) = 1 == 16777216 00000000000000000000000010000000 vec($_, 0, 8) = 2 == 2 01000000000000000000000000000000 vec($_, 1, 8) = 2 == 512 00000000010000000000000000000000 vec($_, 2, 8) = 2 == 131072 00000000000000000100000000000000 vec($_, 3, 8) = 2 == 33554432 00000000000000000000000001000000 vec($_, 0, 8) = 4 == 4 00100000000000000000000000000000 vec($_, 1, 8) = 4 == 1024 00000000001000000000000000000000 vec($_, 2, 8) = 4 == 262144 00000000000000000010000000000000 vec($_, 3, 8) = 4 == 67108864 00000000000000000000000000100000 vec($_, 0, 8) = 8 == 8 00010000000000000000000000000000 vec($_, 1, 8) = 8 == 2048 00000000000100000000000000000000 vec($_, 2, 8) = 8 == 524288 00000000000000000001000000000000 vec($_, 3, 8) = 8 == 134217728 00000000000000000000000000010000 vec($_, 0, 8) = 16 == 16 00001000000000000000000000000000 vec($_, 1, 8) = 16 == 4096 00000000000010000000000000000000 vec($_, 2, 8) = 16 == 1048576 00000000000000000000100000000000 vec($_, 3, 8) = 16 == 268435456 00000000000000000000000000001000 vec($_, 0, 8) = 32 == 32 00000100000000000000000000000000 vec($_, 1, 8) = 32 == 8192 00000000000001000000000000000000 vec($_, 2, 8) = 32 == 2097152 00000000000000000000010000000000 vec($_, 3, 8) = 32 == 536870912 00000000000000000000000000000100 vec($_, 0, 8) = 64 == 64 00000010000000000000000000000000 vec($_, 1, 8) = 64 == 16384 00000000000000100000000000000000 vec($_, 2, 8) = 64 == 4194304 00000000000000000000001000000000 vec($_, 3, 8) = 64 == 1073741824 00000000000000000000000000000010 vec($_, 0, 8) = 128 == 128 00000001000000000000000000000000 vec($_, 1, 8) = 128 == 32768 00000000000000010000000000000000 vec($_, 2, 8) = 128 == 8388608 00000000000000000000000100000000 vec($_, 3, 8) = 128 == 2147483648 00000000000000000000000000000001 =item wait X<wait> =for Pod::Functions wait for any child process to die Behaves like L<wait(2)> on your system: it waits for a child process to terminate and returns the pid of the deceased process, or C<-1> if there are no child processes. The status is returned in L<C<$?>|perlvar/$?> and L<C<${^CHILD_ERROR_NATIVE}>|perlvar/${^CHILD_ERROR_NATIVE}>. Note that a return value of C<-1> could mean that child processes are being automatically reaped, as described in L<perlipc>. If you use L<C<wait>|/wait> in your handler for L<C<$SIG{CHLD}>|perlvar/%SIG>, it may accidentally wait for the child created by L<C<qx>|/qxE<sol>STRINGE<sol>> or L<C<system>|/system LIST>. See L<perlipc> for details. Portability issues: L<perlport/wait>. =item waitpid PID,FLAGS X<waitpid> =for Pod::Functions wait for a particular child process to die Waits for a particular child process to terminate and returns the pid of the deceased process, or C<-1> if there is no such child process. A non-blocking wait (with L<WNOHANG|POSIX/C<WNOHANG>> in FLAGS) can return 0 if there are child processes matching PID but none have terminated yet. The status is returned in L<C<$?>|perlvar/$?> and L<C<${^CHILD_ERROR_NATIVE}>|perlvar/${^CHILD_ERROR_NATIVE}>. A PID of C<0> indicates to wait for any child process whose process group ID is equal to that of the current process. A PID of less than C<-1> indicates to wait for any child process whose process group ID is equal to -PID. A PID of C<-1> indicates to wait for any child process. If you say use POSIX ":sys_wait_h"; my $kid; do { $kid = waitpid(-1, WNOHANG); } while $kid > 0; or 1 while waitpid(-1, WNOHANG) > 0; then you can do a non-blocking wait for all pending zombie processes (see L<POSIX/WAIT>). Non-blocking wait is available on machines supporting either the L<waitpid(2)> or L<wait4(2)> syscalls. However, waiting for a particular pid with FLAGS of C<0> is implemented everywhere. (Perl emulates the system call by remembering the status values of processes that have exited but have not been harvested by the Perl script yet.) Note that on some systems, a return value of C<-1> could mean that child processes are being automatically reaped. See L<perlipc> for details, and for other examples. Portability issues: L<perlport/waitpid>. =item wantarray X<wantarray> X<context> =for Pod::Functions get void vs scalar vs list context of current subroutine call Returns true if the context of the currently executing subroutine or L<C<eval>|/eval EXPR> is looking for a list value. Returns false if the context is looking for a scalar. Returns the undefined value if the context is looking for no value (void context). return unless defined wantarray; # don't bother doing more my @a = complex_calculation(); return wantarray ? @a : "@a"; L<C<wantarray>|/wantarray>'s result is unspecified in the top level of a file, in a C<BEGIN>, C<UNITCHECK>, C<CHECK>, C<INIT> or C<END> block, or in a C<DESTROY> method. This function should have been named wantlist() instead. =item warn LIST X<warn> X<warning> X<STDERR> =for Pod::Functions print debugging info Emits a warning, usually by printing it to C<STDERR>. C<warn> interprets its operand LIST in the same way as C<die>, but is slightly different in what it defaults to when LIST is empty or makes an empty string. If it is empty and L<C<$@>|perlvar/$@> already contains an exception value then that value is used after appending C<"\t...caught">. If it is empty and C<$@> is also empty then the string C<"Warning: Something's wrong"> is used. By default, the exception derived from the operand LIST is stringified and printed to C<STDERR>. This behaviour can be altered by installing a L<C<$SIG{__WARN__}>|perlvar/%SIG> handler. If there is such a handler then no message is automatically printed; it is the handler's responsibility to deal with the exception as it sees fit (like, for instance, converting it into a L<C<die>|/die LIST>). Most handlers must therefore arrange to actually display the warnings that they are not prepared to deal with, by calling L<C<warn>|/warn LIST> again in the handler. Note that this is quite safe and will not produce an endless loop, since C<__WARN__> hooks are not called from inside one. You will find this behavior is slightly different from that of L<C<$SIG{__DIE__}>|perlvar/%SIG> handlers (which don't suppress the error text, but can instead call L<C<die>|/die LIST> again to change it). Using a C<__WARN__> handler provides a powerful way to silence all warnings (even the so-called mandatory ones). An example: # wipe out *all* compile-time warnings BEGIN { $SIG{'__WARN__'} = sub { warn $_[0] if $DOWARN } } my $foo = 10; my $foo = 20; # no warning about duplicate my $foo, # but hey, you asked for it! # no compile-time or run-time warnings before here $DOWARN = 1; # run-time warnings enabled after here warn "\$foo is alive and $foo!"; # does show up See L<perlvar> for details on setting L<C<%SIG>|perlvar/%SIG> entries and for more examples. See the L<Carp> module for other kinds of warnings using its C<carp> and C<cluck> functions. =item write FILEHANDLE X<write> =item write EXPR =item write =for Pod::Functions print a picture record Writes a formatted record (possibly multi-line) to the specified FILEHANDLE, using the format associated with that file. By default the format for a file is the one having the same name as the filehandle, but the format for the current output channel (see the L<C<select>|/select FILEHANDLE> function) may be set explicitly by assigning the name of the format to the L<C<$~>|perlvar/$~> variable. Top of form processing is handled automatically: if there is insufficient room on the current page for the formatted record, the page is advanced by writing a form feed and a special top-of-page format is used to format the new page header before the record is written. By default, the top-of-page format is the name of the filehandle with C<_TOP> appended, or C<top> in the current package if the former does not exist. This would be a problem with autovivified filehandles, but it may be dynamically set to the format of your choice by assigning the name to the L<C<$^>|perlvar/$^> variable while that filehandle is selected. The number of lines remaining on the current page is in variable L<C<$->|perlvar/$->, which can be set to C<0> to force a new page. If FILEHANDLE is unspecified, output goes to the current default output channel, which starts out as STDOUT but may be changed by the L<C<select>|/select FILEHANDLE> operator. If the FILEHANDLE is an EXPR, then the expression is evaluated and the resulting string is used to look up the name of the FILEHANDLE at run time. For more on formats, see L<perlform>. Note that write is I<not> the opposite of L<C<read>|/read FILEHANDLE,SCALAR,LENGTH,OFFSET>. Unfortunately. =item y/// =for Pod::Functions transliterate a string The transliteration operator. Same as L<C<trE<sol>E<sol>E<sol>>|/trE<sol>E<sol>E<sol>>. See L<perlop/"Quote-Like Operators">. =back =head2 Non-function Keywords by Cross-reference =head3 perldata =over =item __DATA__ =item __END__ These keywords are documented in L<perldata/"Special Literals">. =back =head3 perlmod =over =item BEGIN =item CHECK =item END =item INIT =item UNITCHECK These compile phase keywords are documented in L<perlmod/"BEGIN, UNITCHECK, CHECK, INIT and END">. =back =head3 perlobj =over =item DESTROY This method keyword is documented in L<perlobj/"Destructors">. =back =head3 perlop =over =item and =item cmp =item eq =item ge =item gt =item le =item lt =item ne =item not =item or =item x =item xor These operators are documented in L<perlop>. =back =head3 perlsub =over =item AUTOLOAD This keyword is documented in L<perlsub/"Autoloading">. =back =head3 perlsyn =over =item else =item elsif =item for =item foreach =item if =item unless =item until =item while These flow-control keywords are documented in L<perlsyn/"Compound Statements">. =item elseif The "else if" keyword is spelled C<elsif> in Perl. There's no C<elif> or C<else if> either. It does parse C<elseif>, but only to warn you about not using it. See the documentation for flow-control keywords in L<perlsyn/"Compound Statements">. =back =over =item default =item given =item when These flow-control keywords related to the experimental switch feature are documented in L<perlsyn/"Switch Statements">. =back =cut perlmod.pod 0000644 00000063125 15125556335 0006733 0 ustar 00 =head1 NAME perlmod - Perl modules (packages and symbol tables) =head1 DESCRIPTION =head2 Is this the document you were after? There are other documents which might contain the information that you're looking for: =over 2 =item This doc Perl's packages, namespaces, and some info on classes. =item L<perlnewmod> Tutorial on making a new module. =item L<perlmodstyle> Best practices for making a new module. =back =head2 Packages X<package> X<namespace> X<variable, global> X<global variable> X<global> Unlike Perl 4, in which all the variables were dynamic and shared one global name space, causing maintainability problems, Perl 5 provides two mechanisms for protecting code from having its variables stomped on by other code: lexically scoped variables created with C<my> or C<state> and namespaced global variables, which are exposed via the C<vars> pragma, or the C<our> keyword. Any global variable is considered to be part of a namespace and can be accessed via a "fully qualified form". Conversely, any lexically scoped variable is considered to be part of that lexical-scope, and does not have a "fully qualified form". In perl namespaces are called "packages" and the C<package> declaration tells the compiler which namespace to prefix to C<our> variables and unqualified dynamic names. This both protects against accidental stomping and provides an interface for deliberately clobbering global dynamic variables declared and used in other scopes or packages, when that is what you want to do. The scope of the C<package> declaration is from the declaration itself through the end of the enclosing block, C<eval>, or file, whichever comes first (the same scope as the my(), our(), state(), and local() operators, and also the effect of the experimental "reference aliasing," which may change), or until the next C<package> declaration. Unqualified dynamic identifiers will be in this namespace, except for those few identifiers that, if unqualified, default to the main package instead of the current one as described below. A C<package> statement affects only dynamic global symbols, including subroutine names, and variables you've used local() on, but I<not> lexical variables created with my(), our() or state(). Typically, a C<package> statement is the first declaration in a file included in a program by one of the C<do>, C<require>, or C<use> operators. You can switch into a package in more than one place: C<package> has no effect beyond specifying which symbol table the compiler will use for dynamic symbols for the rest of that block or until the next C<package> statement. You can refer to variables and filehandles in other packages by prefixing the identifier with the package name and a double colon: C<$Package::Variable>. If the package name is null, the C<main> package is assumed. That is, C<$::sail> is equivalent to C<$main::sail>. The old package delimiter was a single quote, but double colon is now the preferred delimiter, in part because it's more readable to humans, and in part because it's more readable to B<emacs> macros. It also makes C++ programmers feel like they know what's going on--as opposed to using the single quote as separator, which was there to make Ada programmers feel like they knew what was going on. Because the old-fashioned syntax is still supported for backwards compatibility, if you try to use a string like C<"This is $owner's house">, you'll be accessing C<$owner::s>; that is, the $s variable in package C<owner>, which is probably not what you meant. Use braces to disambiguate, as in C<"This is ${owner}'s house">. X<::> X<'> Packages may themselves contain package separators, as in C<$OUTER::INNER::var>. This implies nothing about the order of name lookups, however. There are no relative packages: all symbols are either local to the current package, or must be fully qualified from the outer package name down. For instance, there is nowhere within package C<OUTER> that C<$INNER::var> refers to C<$OUTER::INNER::var>. C<INNER> refers to a totally separate global package. The custom of treating package names as a hierarchy is very strong, but the language in no way enforces it. Only identifiers starting with letters (or underscore) are stored in a package's symbol table. All other symbols are kept in package C<main>, including all punctuation variables, like $_. In addition, when unqualified, the identifiers STDIN, STDOUT, STDERR, ARGV, ARGVOUT, ENV, INC, and SIG are forced to be in package C<main>, even when used for other purposes than their built-in ones. If you have a package called C<m>, C<s>, or C<y>, then you can't use the qualified form of an identifier because it would be instead interpreted as a pattern match, a substitution, or a transliteration. X<variable, punctuation> Variables beginning with underscore used to be forced into package main, but we decided it was more useful for package writers to be able to use leading underscore to indicate private variables and method names. However, variables and functions named with a single C<_>, such as $_ and C<sub _>, are still forced into the package C<main>. See also L<perlvar/"The Syntax of Variable Names">. C<eval>ed strings are compiled in the package in which the eval() was compiled. (Assignments to C<$SIG{}>, however, assume the signal handler specified is in the C<main> package. Qualify the signal handler name if you wish to have a signal handler in a package.) For an example, examine F<perldb.pl> in the Perl library. It initially switches to the C<DB> package so that the debugger doesn't interfere with variables in the program you are trying to debug. At various points, however, it temporarily switches back to the C<main> package to evaluate various expressions in the context of the C<main> package (or wherever you came from). See L<perldebug>. The special symbol C<__PACKAGE__> contains the current package, but cannot (easily) be used to construct variable names. After C<my($foo)> has hidden package variable C<$foo>, it can still be accessed, without knowing what package you are in, as C<${__PACKAGE__.'::foo'}>. See L<perlsub> for other scoping issues related to my() and local(), and L<perlref> regarding closures. =head2 Symbol Tables X<symbol table> X<stash> X<%::> X<%main::> X<typeglob> X<glob> X<alias> The symbol table for a package happens to be stored in the hash of that name with two colons appended. The main symbol table's name is thus C<%main::>, or C<%::> for short. Likewise the symbol table for the nested package mentioned earlier is named C<%OUTER::INNER::>. The value in each entry of the hash is what you are referring to when you use the C<*name> typeglob notation. local *main::foo = *main::bar; You can use this to print out all the variables in a package, for instance. The standard but antiquated F<dumpvar.pl> library and the CPAN module Devel::Symdump make use of this. The results of creating new symbol table entries directly or modifying any entries that are not already typeglobs are undefined and subject to change between releases of perl. Assignment to a typeglob performs an aliasing operation, i.e., *dick = *richard; causes variables, subroutines, formats, and file and directory handles accessible via the identifier C<richard> also to be accessible via the identifier C<dick>. If you want to alias only a particular variable or subroutine, assign a reference instead: *dick = \$richard; Which makes $richard and $dick the same variable, but leaves @richard and @dick as separate arrays. Tricky, eh? There is one subtle difference between the following statements: *foo = *bar; *foo = \$bar; C<*foo = *bar> makes the typeglobs themselves synonymous while C<*foo = \$bar> makes the SCALAR portions of two distinct typeglobs refer to the same scalar value. This means that the following code: $bar = 1; *foo = \$bar; # Make $foo an alias for $bar { local $bar = 2; # Restrict changes to block print $foo; # Prints '1'! } Would print '1', because C<$foo> holds a reference to the I<original> C<$bar>. The one that was stuffed away by C<local()> and which will be restored when the block ends. Because variables are accessed through the typeglob, you can use C<*foo = *bar> to create an alias which can be localized. (But be aware that this means you can't have a separate C<@foo> and C<@bar>, etc.) What makes all of this important is that the Exporter module uses glob aliasing as the import/export mechanism. Whether or not you can properly localize a variable that has been exported from a module depends on how it was exported: @EXPORT = qw($FOO); # Usual form, can't be localized @EXPORT = qw(*FOO); # Can be localized You can work around the first case by using the fully qualified name (C<$Package::FOO>) where you need a local value, or by overriding it by saying C<*FOO = *Package::FOO> in your script. The C<*x = \$y> mechanism may be used to pass and return cheap references into or from subroutines if you don't want to copy the whole thing. It only works when assigning to dynamic variables, not lexicals. %some_hash = (); # can't be my() *some_hash = fn( \%another_hash ); sub fn { local *hashsym = shift; # now use %hashsym normally, and you # will affect the caller's %another_hash my %nhash = (); # do what you want return \%nhash; } On return, the reference will overwrite the hash slot in the symbol table specified by the *some_hash typeglob. This is a somewhat tricky way of passing around references cheaply when you don't want to have to remember to dereference variables explicitly. Another use of symbol tables is for making "constant" scalars. X<constant> X<scalar, constant> *PI = \3.14159265358979; Now you cannot alter C<$PI>, which is probably a good thing all in all. This isn't the same as a constant subroutine, which is subject to optimization at compile-time. A constant subroutine is one prototyped to take no arguments and to return a constant expression. See L<perlsub> for details on these. The C<use constant> pragma is a convenient shorthand for these. You can say C<*foo{PACKAGE}> and C<*foo{NAME}> to find out what name and package the *foo symbol table entry comes from. This may be useful in a subroutine that gets passed typeglobs as arguments: sub identify_typeglob { my $glob = shift; print 'You gave me ', *{$glob}{PACKAGE}, '::', *{$glob}{NAME}, "\n"; } identify_typeglob *foo; identify_typeglob *bar::baz; This prints You gave me main::foo You gave me bar::baz The C<*foo{THING}> notation can also be used to obtain references to the individual elements of *foo. See L<perlref>. Subroutine definitions (and declarations, for that matter) need not necessarily be situated in the package whose symbol table they occupy. You can define a subroutine outside its package by explicitly qualifying the name of the subroutine: package main; sub Some_package::foo { ... } # &foo defined in Some_package This is just a shorthand for a typeglob assignment at compile time: BEGIN { *Some_package::foo = sub { ... } } and is I<not> the same as writing: { package Some_package; sub foo { ... } } In the first two versions, the body of the subroutine is lexically in the main package, I<not> in Some_package. So something like this: package main; $Some_package::name = "fred"; $main::name = "barney"; sub Some_package::foo { print "in ", __PACKAGE__, ": \$name is '$name'\n"; } Some_package::foo(); prints: in main: $name is 'barney' rather than: in Some_package: $name is 'fred' This also has implications for the use of the SUPER:: qualifier (see L<perlobj>). =head2 BEGIN, UNITCHECK, CHECK, INIT and END X<BEGIN> X<UNITCHECK> X<CHECK> X<INIT> X<END> Five specially named code blocks are executed at the beginning and at the end of a running Perl program. These are the C<BEGIN>, C<UNITCHECK>, C<CHECK>, C<INIT>, and C<END> blocks. These code blocks can be prefixed with C<sub> to give the appearance of a subroutine (although this is not considered good style). One should note that these code blocks don't really exist as named subroutines (despite their appearance). The thing that gives this away is the fact that you can have B<more than one> of these code blocks in a program, and they will get B<all> executed at the appropriate moment. So you can't execute any of these code blocks by name. A C<BEGIN> code block is executed as soon as possible, that is, the moment it is completely defined, even before the rest of the containing file (or string) is parsed. You may have multiple C<BEGIN> blocks within a file (or eval'ed string); they will execute in order of definition. Because a C<BEGIN> code block executes immediately, it can pull in definitions of subroutines and such from other files in time to be visible to the rest of the compile and run time. Once a C<BEGIN> has run, it is immediately undefined and any code it used is returned to Perl's memory pool. An C<END> code block is executed as late as possible, that is, after perl has finished running the program and just before the interpreter is being exited, even if it is exiting as a result of a die() function. (But not if it's morphing into another program via C<exec>, or being blown out of the water by a signal--you have to trap that yourself (if you can).) You may have multiple C<END> blocks within a file--they will execute in reverse order of definition; that is: last in, first out (LIFO). C<END> blocks are not executed when you run perl with the C<-c> switch, or if compilation fails. Note that C<END> code blocks are B<not> executed at the end of a string C<eval()>: if any C<END> code blocks are created in a string C<eval()>, they will be executed just as any other C<END> code block of that package in LIFO order just before the interpreter is being exited. Inside an C<END> code block, C<$?> contains the value that the program is going to pass to C<exit()>. You can modify C<$?> to change the exit value of the program. Beware of changing C<$?> by accident (e.g. by running something via C<system>). X<$?> Inside of a C<END> block, the value of C<${^GLOBAL_PHASE}> will be C<"END">. C<UNITCHECK>, C<CHECK> and C<INIT> code blocks are useful to catch the transition between the compilation phase and the execution phase of the main program. C<UNITCHECK> blocks are run just after the unit which defined them has been compiled. The main program file and each module it loads are compilation units, as are string C<eval>s, run-time code compiled using the C<(?{ })> construct in a regex, calls to C<do FILE>, C<require FILE>, and code after the C<-e> switch on the command line. C<BEGIN> and C<UNITCHECK> blocks are not directly related to the phase of the interpreter. They can be created and executed during any phase. C<CHECK> code blocks are run just after the B<initial> Perl compile phase ends and before the run time begins, in LIFO order. C<CHECK> code blocks are used in the Perl compiler suite to save the compiled state of the program. Inside of a C<CHECK> block, the value of C<${^GLOBAL_PHASE}> will be C<"CHECK">. C<INIT> blocks are run just before the Perl runtime begins execution, in "first in, first out" (FIFO) order. Inside of an C<INIT> block, the value of C<${^GLOBAL_PHASE}> will be C<"INIT">. The C<CHECK> and C<INIT> blocks in code compiled by C<require>, string C<do>, or string C<eval> will not be executed if they occur after the end of the main compilation phase; that can be a problem in mod_perl and other persistent environments which use those functions to load code at runtime. When you use the B<-n> and B<-p> switches to Perl, C<BEGIN> and C<END> work just as they do in B<awk>, as a degenerate case. Both C<BEGIN> and C<CHECK> blocks are run when you use the B<-c> switch for a compile-only syntax check, although your main code is not. The B<begincheck> program makes it all clear, eventually: #!/usr/bin/perl # begincheck print "10. Ordinary code runs at runtime.\n"; END { print "16. So this is the end of the tale.\n" } INIT { print " 7. INIT blocks run FIFO just before runtime.\n" } UNITCHECK { print " 4. And therefore before any CHECK blocks.\n" } CHECK { print " 6. So this is the sixth line.\n" } print "11. It runs in order, of course.\n"; BEGIN { print " 1. BEGIN blocks run FIFO during compilation.\n" } END { print "15. Read perlmod for the rest of the story.\n" } CHECK { print " 5. CHECK blocks run LIFO after all compilation.\n" } INIT { print " 8. Run this again, using Perl's -c switch.\n" } print "12. This is anti-obfuscated code.\n"; END { print "14. END blocks run LIFO at quitting time.\n" } BEGIN { print " 2. So this line comes out second.\n" } UNITCHECK { print " 3. UNITCHECK blocks run LIFO after each file is compiled.\n" } INIT { print " 9. You'll see the difference right away.\n" } print "13. It only _looks_ like it should be confusing.\n"; __END__ =head2 Perl Classes X<class> X<@ISA> There is no special class syntax in Perl, but a package may act as a class if it provides subroutines to act as methods. Such a package may also derive some of its methods from another class (package) by listing the other package name(s) in its global @ISA array (which must be a package global, not a lexical). For more on this, see L<perlootut> and L<perlobj>. =head2 Perl Modules X<module> A module is just a set of related functions in a library file, i.e., a Perl package with the same name as the file. It is specifically designed to be reusable by other modules or programs. It may do this by providing a mechanism for exporting some of its symbols into the symbol table of any package using it, or it may function as a class definition and make its semantics available implicitly through method calls on the class and its objects, without explicitly exporting anything. Or it can do a little of both. For example, to start a traditional, non-OO module called Some::Module, create a file called F<Some/Module.pm> and start with this template: package Some::Module; # assumes Some/Module.pm use strict; use warnings; # Get the import method from Exporter to export functions and # variables use Exporter 5.57 'import'; # set the version for version checking our $VERSION = '1.00'; # Functions and variables which are exported by default our @EXPORT = qw(func1 func2); # Functions and variables which can be optionally exported our @EXPORT_OK = qw($Var1 %Hashit func3); # exported package globals go here our $Var1 = ''; our %Hashit = (); # non-exported package globals go here # (they are still accessible as $Some::Module::stuff) our @more = (); our $stuff = ''; # file-private lexicals go here, before any functions which use them my $priv_var = ''; my %secret_hash = (); # here's a file-private function as a closure, # callable as $priv_func->(); my $priv_func = sub { ... }; # make all your functions, whether exported or not; # remember to put something interesting in the {} stubs sub func1 { ... } sub func2 { ... } # this one isn't always exported, but could be called directly # as Some::Module::func3() sub func3 { ... } END { ... } # module clean-up code here (global destructor) 1; # don't forget to return a true value from the file Then go on to declare and use your variables in functions without any qualifications. See L<Exporter> and the L<perlmodlib> for details on mechanics and style issues in module creation. Perl modules are included into your program by saying use Module; or use Module LIST; This is exactly equivalent to BEGIN { require 'Module.pm'; 'Module'->import; } or BEGIN { require 'Module.pm'; 'Module'->import( LIST ); } As a special case use Module (); is exactly equivalent to BEGIN { require 'Module.pm'; } All Perl module files have the extension F<.pm>. The C<use> operator assumes this so you don't have to spell out "F<Module.pm>" in quotes. This also helps to differentiate new modules from old F<.pl> and F<.ph> files. Module names are also capitalized unless they're functioning as pragmas; pragmas are in effect compiler directives, and are sometimes called "pragmatic modules" (or even "pragmata" if you're a classicist). The two statements: require SomeModule; require "SomeModule.pm"; differ from each other in two ways. In the first case, any double colons in the module name, such as C<Some::Module>, are translated into your system's directory separator, usually "/". The second case does not, and would have to be specified literally. The other difference is that seeing the first C<require> clues in the compiler that uses of indirect object notation involving "SomeModule", as in C<$ob = purge SomeModule>, are method calls, not function calls. (Yes, this really can make a difference.) Because the C<use> statement implies a C<BEGIN> block, the importing of semantics happens as soon as the C<use> statement is compiled, before the rest of the file is compiled. This is how it is able to function as a pragma mechanism, and also how modules are able to declare subroutines that are then visible as list or unary operators for the rest of the current file. This will not work if you use C<require> instead of C<use>. With C<require> you can get into this problem: require Cwd; # make Cwd:: accessible $here = Cwd::getcwd(); use Cwd; # import names from Cwd:: $here = getcwd(); require Cwd; # make Cwd:: accessible $here = getcwd(); # oops! no main::getcwd() In general, C<use Module ()> is recommended over C<require Module>, because it determines module availability at compile time, not in the middle of your program's execution. An exception would be if two modules each tried to C<use> each other, and each also called a function from that other module. In that case, it's easy to use C<require> instead. Perl packages may be nested inside other package names, so we can have package names containing C<::>. But if we used that package name directly as a filename it would make for unwieldy or impossible filenames on some systems. Therefore, if a module's name is, say, C<Text::Soundex>, then its definition is actually found in the library file F<Text/Soundex.pm>. Perl modules always have a F<.pm> file, but there may also be dynamically linked executables (often ending in F<.so>) or autoloaded subroutine definitions (often ending in F<.al>) associated with the module. If so, these will be entirely transparent to the user of the module. It is the responsibility of the F<.pm> file to load (or arrange to autoload) any additional functionality. For example, although the POSIX module happens to do both dynamic loading and autoloading, the user can say just C<use POSIX> to get it all. =head2 Making your module threadsafe X<threadsafe> X<thread safe> X<module, threadsafe> X<module, thread safe> X<CLONE> X<CLONE_SKIP> X<thread> X<threads> X<ithread> Perl supports a type of threads called interpreter threads (ithreads). These threads can be used explicitly and implicitly. Ithreads work by cloning the data tree so that no data is shared between different threads. These threads can be used by using the C<threads> module or by doing fork() on win32 (fake fork() support). When a thread is cloned all Perl data is cloned, however non-Perl data cannot be cloned automatically. Perl after 5.8.0 has support for the C<CLONE> special subroutine. In C<CLONE> you can do whatever you need to do, like for example handle the cloning of non-Perl data, if necessary. C<CLONE> will be called once as a class method for every package that has it defined (or inherits it). It will be called in the context of the new thread, so all modifications are made in the new area. Currently CLONE is called with no parameters other than the invocant package name, but code should not assume that this will remain unchanged, as it is likely that in future extra parameters will be passed in to give more information about the state of cloning. If you want to CLONE all objects you will need to keep track of them per package. This is simply done using a hash and Scalar::Util::weaken(). Perl after 5.8.7 has support for the C<CLONE_SKIP> special subroutine. Like C<CLONE>, C<CLONE_SKIP> is called once per package; however, it is called just before cloning starts, and in the context of the parent thread. If it returns a true value, then no objects of that class will be cloned; or rather, they will be copied as unblessed, undef values. For example: if in the parent there are two references to a single blessed hash, then in the child there will be two references to a single undefined scalar value instead. This provides a simple mechanism for making a module threadsafe; just add C<sub CLONE_SKIP { 1 }> at the top of the class, and C<DESTROY()> will now only be called once per object. Of course, if the child thread needs to make use of the objects, then a more sophisticated approach is needed. Like C<CLONE>, C<CLONE_SKIP> is currently called with no parameters other than the invocant package name, although that may change. Similarly, to allow for future expansion, the return value should be a single C<0> or C<1> value. =head1 SEE ALSO See L<perlmodlib> for general style issues related to building Perl modules and classes, as well as descriptions of the standard library and CPAN, L<Exporter> for how Perl's standard import/export mechanism works, L<perlootut> and L<perlobj> for in-depth information on creating classes, L<perlobj> for a hard-core reference document on objects, L<perlsub> for an explanation of functions and scoping, and L<perlxstut> and L<perlguts> for more information on writing extension modules. perl583delta.pod 0000644 00000014277 15125556335 0007511 0 ustar 00 =head1 NAME perl583delta - what is new for perl v5.8.3 =head1 DESCRIPTION This document describes differences between the 5.8.2 release and the 5.8.3 release. If you are upgrading from an earlier release such as 5.6.1, first read the L<perl58delta>, which describes differences between 5.6.0 and 5.8.0, and the L<perl581delta> and L<perl582delta>, which describe differences between 5.8.0, 5.8.1 and 5.8.2 =head1 Incompatible Changes There are no changes incompatible with 5.8.2. =head1 Core Enhancements A C<SCALAR> method is now available for tied hashes. This is called when a tied hash is used in scalar context, such as if (%tied_hash) { ... } The old behaviour was that %tied_hash would return whatever would have been returned for that hash before the hash was tied (so usually 0). The new behaviour in the absence of a SCALAR method is to return TRUE if in the middle of an C<each> iteration, and otherwise call FIRSTKEY to check if the hash is empty (making sure that a subsequent C<each> will also begin by calling FIRSTKEY). Please see L<perltie/SCALAR> for the full details and caveats. =head1 Modules and Pragmata =over 4 =item CGI =item Cwd =item Digest =item Digest::MD5 =item Encode =item File::Spec =item FindBin A function C<again> is provided to resolve problems where modules in different directories wish to use FindBin. =item List::Util You can now weaken references to read only values. =item Math::BigInt =item PodParser =item Pod::Perldoc =item POSIX =item Unicode::Collate =item Unicode::Normalize =item Test::Harness =item threads::shared C<cond_wait> has a new two argument form. C<cond_timedwait> has been added. =back =head1 Utility Changes C<find2perl> now assumes C<-print> as a default action. Previously, it needed to be specified explicitly. A new utility, C<prove>, makes it easy to run an individual regression test at the command line. C<prove> is part of Test::Harness, which users of earlier Perl versions can install from CPAN. =head1 New Documentation The documentation has been revised in places to produce more standard manpages. The documentation for the special code blocks (BEGIN, CHECK, INIT, END) has been improved. =head1 Installation and Configuration Improvements Perl now builds on OpenVMS I64 =head1 Selected Bug Fixes Using substr() on a UTF8 string could cause subsequent accesses on that string to return garbage. This was due to incorrect UTF8 offsets being cached, and is now fixed. join() could return garbage when the same join() statement was used to process 8 bit data having earlier processed UTF8 data, due to the flags on that statement's temporary workspace not being reset correctly. This is now fixed. C<$a .. $b> will now work as expected when either $a or $b is C<undef> Using Unicode keys with tied hashes should now work correctly. Reading $^E now preserves $!. Previously, the C code implementing $^E did not preserve C<errno>, so reading $^E could cause C<errno> and therefore C<$!> to change unexpectedly. Reentrant functions will (once more) work with C++. 5.8.2 introduced a bugfix which accidentally broke the compilation of Perl extensions written in C++ =head1 New or Changed Diagnostics The fatal error "DESTROY created new reference to dead object" is now documented in L<perldiag>. =head1 Changed Internals The hash code has been refactored to reduce source duplication. The external interface is unchanged, and aside from the bug fixes described above, there should be no change in behaviour. C<hv_clear_placeholders> is now part of the perl API Some C macros have been tidied. In particular macros which create temporary local variables now name these variables more defensively, which should avoid bugs where names clash. <signal.h> is now always included. =head1 Configuration and Building C<Configure> now invokes callbacks regardless of the value of the variable they are called for. Previously callbacks were only invoked in the C<case $variable $define)> branch. This change should only affect platform maintainers writing configuration hints files. =head1 Platform Specific Problems The regression test ext/threads/shared/t/wait.t fails on early RedHat 9 and HP-UX 10.20 due to bugs in their threading implementations. RedHat users should see https://rhn.redhat.com/errata/RHBA-2003-136.html and consider upgrading their glibc. =head1 Known Problems Detached threads aren't supported on Windows yet, as they may lead to memory access violation problems. There is a known race condition opening scripts in C<suidperl>. C<suidperl> is neither built nor installed by default, and has been deprecated since perl 5.8.0. You are advised to replace use of suidperl with tools such as sudo ( http://www.courtesan.com/sudo/ ) We have a backlog of unresolved bugs. Dealing with bugs and bug reports is unglamorous work; not something ideally suited to volunteer labour, but that is all that we have. The perl5 development team are implementing changes to help address this problem, which should go live in early 2004. =head1 Future Directions Code freeze for the next maintenance release (5.8.4) is on March 31st 2004, with release expected by mid April. Similarly 5.8.5's freeze will be at the end of June, with release by mid July. =head1 Obituary Iain 'Spoon' Truskett, Perl hacker, author of L<perlreref> and contributor to CPAN, died suddenly on 29th December 2003, aged 24. He will be missed. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://bugs.perl.org. There may also be information at http://www.perl.org, the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. You can browse and search the Perl 5 bugs at http://bugs.perl.org/ =head1 SEE ALSO The F<Changes> file for exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl5142delta.pod 0000644 00000015354 15125556335 0007562 0 ustar 00 =encoding utf8 =head1 NAME perl5142delta - what is new for perl v5.14.2 =head1 DESCRIPTION This document describes differences between the 5.14.1 release and the 5.14.2 release. If you are upgrading from an earlier release such as 5.14.0, first read L<perl5141delta>, which describes differences between 5.14.0 and 5.14.1. =head1 Core Enhancements No changes since 5.14.0. =head1 Security =head2 C<File::Glob::bsd_glob()> memory error with GLOB_ALTDIRFUNC (CVE-2011-2728). Calling C<File::Glob::bsd_glob> with the unsupported flag GLOB_ALTDIRFUNC would cause an access violation / segfault. A Perl program that accepts a flags value from an external source could expose itself to denial of service or arbitrary code execution attacks. There are no known exploits in the wild. The problem has been corrected by explicitly disabling all unsupported flags and setting unused function pointers to null. Bug reported by Clément Lecigne. =head2 C<Encode> decode_xs n-byte heap-overflow (CVE-2011-2939) A bug in C<Encode> could, on certain inputs, cause the heap to overflow. This problem has been corrected. Bug reported by Robert Zacek. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.14.0. If any exist, they are bugs and reports are welcome. =head1 Deprecations There have been no deprecations since 5.14.0. =head1 Modules and Pragmata =head2 New Modules and Pragmata None =head2 Updated Modules and Pragmata =over 4 =item * L<CPAN> has been upgraded from version 1.9600 to version 1.9600_01. L<CPAN::Distribution> has been upgraded from version 1.9602 to 1.9602_01. Backported bugfixes from CPAN version 1.9800. Ensures proper detection of C<configure_requires> prerequisites from CPAN Meta files in the case where C<dynamic_config> is true. [rt.cpan.org #68835] Also ensures that C<configure_requires> is only checked in META files, not MYMETA files, so protect against MYMETA generation that drops C<configure_requires>. =item * L<Encode> has been upgraded from version 2.42 to 2.42_01. See L</Security>. =item * L<File::Glob> has been upgraded from version 1.12 to version 1.13. See L</Security>. =item * L<PerlIO::scalar> has been upgraded from version 0.11 to 0.11_01. It fixes a problem with C<< open my $fh, ">", \$scalar >> not working if C<$scalar> is a copy-on-write scalar. =back =head2 Removed Modules and Pragmata None =head1 Platform Support =head2 New Platforms None =head2 Discontinued Platforms None =head2 Platform-Specific Notes =over 4 =item HP-UX PA-RISC/64 now supports gcc-4.x A fix to correct the socketsize now makes the test suite pass on HP-UX PA-RISC for 64bitall builds. =item Building on OS X 10.7 Lion and Xcode 4 works again The build system has been updated to work with the build tools under Mac OS X 10.7. =back =head1 Bug Fixes =over 4 =item * In @INC filters (subroutines returned by subroutines in @INC), $_ used to misbehave: If returned from a subroutine, it would not be copied, but the variable itself would be returned; and freeing $_ (e.g., with C<undef *_>) would cause perl to crash. This has been fixed [perl #91880]. =item * Perl 5.10.0 introduced some faulty logic that made "U*" in the middle of a pack template equivalent to "U0" if the input string was empty. This has been fixed [perl #90160]. =item * C<caller> no longer leaks memory when called from the DB package if C<@DB::args> was assigned to after the first call to C<caller>. L<Carp> was triggering this bug [perl #97010]. =item * C<utf8::decode> had a nasty bug that would modify copy-on-write scalars' string buffers in place (i.e., skipping the copy). This could result in hashes having two elements with the same key [perl #91834]. =item * Localising a tied variable used to make it read-only if it contained a copy-on-write string. =item * Elements of restricted hashes (see the L<fields> pragma) containing copy-on-write values couldn't be deleted, nor could such hashes be cleared (C<%hash = ()>). =item * Locking a hash element that is a glob copy no longer causes subsequent assignment to it to corrupt the glob. =item * A panic involving the combination of the regular expression modifiers C</aa> introduced in 5.14.0 and the C<\b> escape sequence has been fixed [perl #95964]. =back =head1 Known Problems This is a list of some significant unfixed bugs, which are regressions from 5.12.0. =over 4 =item * C<PERL_GLOBAL_STRUCT> is broken. Since perl 5.14.0, building with C<-DPERL_GLOBAL_STRUCT> hasn't been possible. This means that perl currently doesn't work on any platforms that require it to be built this way, including Symbian. While C<PERL_GLOBAL_STRUCT> now works again on recent development versions of perl, it actually working on Symbian again hasn't been verified. We'd be very interested in hearing from anyone working with Perl on Symbian. =back =head1 Acknowledgements Perl 5.14.2 represents approximately three months of development since Perl 5.14.1 and contains approximately 1200 lines of changes across 61 files from 9 authors. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.14.2: Craig A. Berry, David Golden, Father Chrysostomos, Florian Ragwitz, H.Merijn Brand, Karl Williamson, Nicholas Clark, Pau Amma and Ricardo Signes. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlutil.pod 0000644 00000016173 15125556335 0007132 0 ustar 00 =head1 NAME perlutil - utilities packaged with the Perl distribution =head1 DESCRIPTION Along with the Perl interpreter itself, the Perl distribution installs a range of utilities on your system. There are also several utilities which are used by the Perl distribution itself as part of the install process. This document exists to list all of these utilities, explain what they are for and provide pointers to each module's documentation, if appropriate. =head1 LIST OF UTILITIES =head2 Documentation =over 3 =item L<perldoc|perldoc> The main interface to Perl's documentation is C<perldoc>, although if you're reading this, it's more than likely that you've already found it. F<perldoc> will extract and format the documentation from any file in the current directory, any Perl module installed on the system, or any of the standard documentation pages, such as this one. Use C<perldoc E<lt>nameE<gt>> to get information on any of the utilities described in this document. =item L<pod2man|pod2man> and L<pod2text|pod2text> If it's run from a terminal, F<perldoc> will usually call F<pod2man> to translate POD (Plain Old Documentation - see L<perlpod> for an explanation) into a manpage, and then run F<man> to display it; if F<man> isn't available, F<pod2text> will be used instead and the output piped through your favourite pager. =item L<pod2html|pod2html> As well as these two, there is another converter: F<pod2html> will produce HTML pages from POD. =item L<pod2usage|pod2usage> If you just want to know how to use the utilities described here, F<pod2usage> will just extract the "USAGE" section; some of the utilities will automatically call F<pod2usage> on themselves when you call them with C<-help>. =item L<podchecker|podchecker> If you're writing your own documentation in POD, the F<podchecker> utility will look for errors in your markup. =item L<splain|splain> F<splain> is an interface to L<perldiag> - paste in your error message to it, and it'll explain it for you. =item C<roffitall> The C<roffitall> utility is not installed on your system but lives in the F<pod/> directory of your Perl source kit; it converts all the documentation from the distribution to F<*roff> format, and produces a typeset PostScript or text file of the whole lot. =back =head2 Converters To help you convert legacy programs to more modern Perl, the L<pl2pm|pl2pm> utility will help you convert old-style Perl 4 libraries to new-style Perl5 modules. =head2 Administration =over 3 =item L<libnetcfg|libnetcfg> To display and change the libnet configuration run the libnetcfg command. =item L<perlivp> The F<perlivp> program is set up at Perl source code build time to test the Perl version it was built under. It can be used after running C<make install> (or your platform's equivalent procedure) to verify that perl and its libraries have been installed correctly. =back =head2 Development There are a set of utilities which help you in developing Perl programs, and in particular, extending Perl with C. =over 3 =item L<perlbug|perlbug> F<perlbug> used to be the recommended way to report bugs in the perl interpreter itself or any of the standard library modules back to the developers; bug reports and patches should now be submitted to L<https://github.com/Perl/perl5/issues>. =item L<perlthanks|perlbug> This program provides an easy way to send a thank-you message back to the authors and maintainers of perl. It's just F<perlbug> installed under another name. =item L<h2ph|h2ph> Back before Perl had the XS system for connecting with C libraries, programmers used to get library constants by reading through the C header files. You may still see C<require 'syscall.ph'> or similar around - the F<.ph> file should be created by running F<h2ph> on the corresponding F<.h> file. See the F<h2ph> documentation for more on how to convert a whole bunch of header files at once. =item L<h2xs|h2xs> F<h2xs> converts C header files into XS modules, and will try and write as much glue between C libraries and Perl modules as it can. It's also very useful for creating skeletons of pure Perl modules. =item L<enc2xs> F<enc2xs> builds a Perl extension for use by Encode from either Unicode Character Mapping files (.ucm) or Tcl Encoding Files (.enc). Besides being used internally during the build process of the Encode module, you can use F<enc2xs> to add your own encoding to perl. No knowledge of XS is necessary. =item L<xsubpp> F<xsubpp> is a compiler to convert Perl XS code into C code. It is typically run by the makefiles created by L<ExtUtils::MakeMaker>. F<xsubpp> will compile XS code into C code by embedding the constructs necessary to let C functions manipulate Perl values and creates the glue necessary to let Perl access those functions. =item L<prove> F<prove> is a command-line interface to the test-running functionality of F<Test::Harness>. It's an alternative to C<make test>. =item L<corelist> A command-line front-end to C<Module::CoreList>, to query what modules were shipped with given versions of perl. =back =head2 General tools A few general-purpose tools are shipped with perl, mostly because they came along modules included in the perl distribution. =over 3 =item L<piconv> B<piconv> is a Perl version of B<iconv>, a character encoding converter widely available for various Unixen today. This script was primarily a technology demonstrator for Perl v5.8.0, but you can use piconv in the place of iconv for virtually any case. =item L<ptar> F<ptar> is a tar-like program, written in pure Perl. =item L<ptardiff> F<ptardiff> is a small utility that produces a diff between an extracted archive and an unextracted one. (Note that this utility requires the C<Text::Diff> module to function properly; this module isn't distributed with perl, but is available from the CPAN.) =item L<ptargrep> F<ptargrep> is a utility to apply pattern matching to the contents of files in a tar archive. =item L<shasum> This utility, that comes with the C<Digest::SHA> module, is used to print or verify SHA checksums. =item L<zipdetails> L<zipdetails> displays information about the internal record structure of the zip file. It is not concerned with displaying any details of the compressed data stored in the zip file. =back =head2 Installation These utilities help manage extra Perl modules that don't come with the perl distribution. =over 3 =item L<cpan> F<cpan> is a command-line interface to CPAN.pm. It allows you to install modules or distributions from CPAN, or just get information about them, and a lot more. It is similar to the command line mode of the L<CPAN> module, perl -MCPAN -e shell =item L<instmodsh> A little interface to ExtUtils::Installed to examine installed modules, validate your packlists and even create a tarball from an installed module. =back =head1 SEE ALSO L<perldoc|perldoc>, L<pod2man|pod2man>, L<perlpod>, L<pod2html|pod2html>, L<pod2usage|pod2usage>, L<podchecker|podchecker>, L<splain|splain>, L<perldiag>, C<roffitall|roffitall>, L<File::Find|File::Find>, L<pl2pm|pl2pm>, L<perlbug|perlbug>, L<h2ph|h2ph>, L<h2xs|h2xs>, L<enc2xs>, L<xsubpp>, L<cpan>, L<instmodsh>, L<piconv>, L<prove>, L<corelist>, L<ptar>, L<ptardiff>, L<shasum>, L<zipdetails> =cut perlamiga.pod 0000644 00000013165 15125556335 0007231 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see perlpod manpage) which is specially designed to be readable as is. =head1 NAME perlamiga - Perl under AmigaOS 4.1 =head1 NOTE This is a port of Perl 5.22.1, it is a fresh port and not in any way compatible with my previous ports of Perl 5.8 and 5.16.3. This means you will need to reinstall / rebuild any third party modules you have installed. newlib.library version 53.28 or greater is required. =head1 SYNOPSIS Once perl is installed you can read this document in the following way sh -c "perldoc perlamiga" or you may read I<as is>: either as F<README.amiga>, or F<pod/perlamiga.pod>. =cut NAME SYNOPSIS DESCRIPTION - Prerequisites - Starting Perl programs under AmigaOS - Shortcomings of Perl under AmigaOS INSTALLATION CHANGES =head1 DESCRIPTION =head2 Prerequisites for running Perl 5.22.1 under AmigaOS 4.1 =over 6 =item B<AmigaOS 4.1 update 6 with all updates applied as of 9th October 2013> The most important of which is: =item B<newlib.library version 53.28 or greater> =item B<AmigaOS SDK> Perl installs into the SDK directory structure and expects many of the build tools present in the SDK to be available. So for the best results install the SDK first. =item B<abc-shell> If you do not have the SDK installed you must at least have abc-shell installed or some other suitable sh port. This is required to run external commands and should be available as 'sh' in your path. =back =head2 Starting Perl programs under AmigaOS 4.1 Perl may be run from the AmigaOS shell but for best results should be run under abc-shell. (abc-shell handles file globbing, pattern expansion, and sets up environment variables in the UN*Xy way that Perl expects.) For example: New Shell process 10 10.AmigaOS4:> sh /AmigaOS4>perl path:to/myprog arg1 arrg2 arg3 Abc-shell can also launch programs via the #! syntax at the start of the program file, it's best use the form #!SDK:Local/C/perl so that the AmigaOS shell may also find perl in the same way. AmigaOS requires the script bit to be set for this to work 10.AmigaOS4:> sh /AmigaOS4>myprog arg1 arrg2 arg3 =head2 Limitations of Perl under AmigaOS 4.1 =over 6 =item B<Nested Piped programs can crash when run from older abc-shells> abc-shell version 53.2 has a bug that can cause crashes in the subprocesses used to run piped programs, if a later version is available you should install it instead. =item B<Incorrect or unexpected command line unescaping> newlib.library 53.30 and earlier incorrectly unescape slashed escape sequences e.g. \" \n \t etc requiring unusual extra escaping. =item B<Starting subprocesses via open has limitations> open FH, "command |" Subprocesses started with open use a minimal popen() routine and therefore they do not return pids usable with waitpid etc. =item If you find any other limitations or bugs then let me know. Please report bugs in this version of perl to andy@broad.ology.org.uk in the first instance. =back =head1 INSTALLATION This guide assumes you have obtained a prebuilt archive from os4depot.net. Unpack the main archive to a temporary location (RAM: is fine). Execute the provided install script from shell or via its icon. You B<must not> attempt to install by hand. Once installed you may delete the temporary archive. This approach will preserve links in the installation without creating duplicate binaries. If you have the earlier ports perl 5.16 or 5.8 installed you may like to rename your perl executable to perl516 or perl58 or something similar before the installation of 5.22.1, this will allow you to use both versions at the same time. =head1 Amiga Specific Modules =head2 Amiga::ARexx The Amiga::ARexx module allows you to easily create a perl based ARexx host or to send ARexx commands to other programs. Try C<perldoc Amiga::ARexx> for more info. =head2 Amiga::Exec The Amiga::Exec module introduces support for Wait(). Try C<perldoc Amiga::Exec> for more info. =head1 BUILDING To build perl under AmigaOS from the patched sources you will need to have a recent version of the SDK. Version 53.29 is recommended, earlier versions will probably work too. With the help of Jarkko Hietaniemi the Configure system has been tweaked to run under abc-shell so the recommend build process is as follows. stack 2000000 sh Configure -de gmake This will build the default setup that installs under SDK:local/newlib/lib/ =head1 CHANGES =over 6 =item B<August 2015> =over 2 =item Port to Perl 5.22 =item Add handling of NIL: to afstat() =item Fix inheritance of environment variables by subprocesses. =item Fix exec, and exit in "forked" subprocesses. =item Fix issue with newlib's unlink, which could cause infinite loops. =item Add flock() emulation using IDOS->LockRecord thanks to Tony Cook for the suggestion. =item Fix issue where kill was using the wrong kind of process ID =back =item B<27th November 2013> =over 2 =item Create new installation system based on installperl links and Amiga protection bits now set correctly. =item Pod now defaults to text. =item File::Spec should now recognise an Amiga style absolute path as well as an Unix style one. Relative paths must always be Unix style. =back =item B<20th November 2013> =over 2 =item Configured to use SDK:Local/C/perl to start standard scripts =item Added Amiga::Exec module with support for Wait() and AmigaOS signal numbers. =back =item B<10th October 13> First release of port to 5.16.3. =back =head1 SEE ALSO You like this port? See L<http://www.broad.ology.org.uk/amiga/> for how you can help. =cut perlapi.pod 0000644 00001703062 15125556335 0006727 0 ustar 00 -*- buffer-read-only: t -*- !!!!!!! DO NOT EDIT THIS FILE !!!!!!! This file is built by autodoc.pl extracting documentation from the C source files. Any changes made here will be lost! =encoding UTF-8 =head1 NAME perlapi - autogenerated documentation for the perl public API =head1 DESCRIPTION X<Perl API> X<API> X<api> This file contains most of the documentation of the perl public API, as generated by F<embed.pl>. Specifically, it is a listing of functions, macros, flags, and variables that may be used by extension writers. Some specialized items are instead documented in F<config.h>, L<perlapio>, L<perlcall>, L<perlclib>, L<perlfilter>, L<perlguts>, L<perlmroapi>, L<perlxs>, L<perlxstut>, and L<warnings>. L<At the end|/Undocumented functions> is a list of functions which have yet to be documented. Patches welcome! The interfaces of these are subject to change without notice. Anything not listed here is not part of the public API, and should not be used by extension writers at all. For these reasons, blindly using functions listed in proto.h is to be avoided when writing extensions. In Perl, unlike C, a string of characters may generally contain embedded C<NUL> characters. Sometimes in the documentation a Perl string is referred to as a "buffer" to distinguish it from a C string, but sometimes they are both just referred to as strings. Note that all Perl API global variables must be referenced with the C<PL_> prefix. Again, those not listed here are not to be used by extension writers, and can be changed or removed without notice; same with macros. Some macros are provided for compatibility with the older, unadorned names, but this support may be disabled in a future release. Perl was originally written to handle US-ASCII only (that is characters whose ordinal numbers are in the range 0 - 127). And documentation and comments may still use the term ASCII, when sometimes in fact the entire range from 0 - 255 is meant. The non-ASCII characters below 256 can have various meanings, depending on various things. (See, most notably, L<perllocale>.) But usually the whole range can be referred to as ISO-8859-1. Often, the term "Latin-1" (or "Latin1") is used as an equivalent for ISO-8859-1. But some people treat "Latin1" as referring just to the characters in the range 128 through 255, or somethimes from 160 through 255. This documentation uses "Latin1" and "Latin-1" to refer to all 256 characters. Note that Perl can be compiled and run under either ASCII or EBCDIC (See L<perlebcdic>). Most of the documentation (and even comments in the code) ignore the EBCDIC possibility. For almost all purposes the differences are transparent. As an example, under EBCDIC, instead of UTF-8, UTF-EBCDIC is used to encode Unicode strings, and so whenever this documentation refers to C<utf8> (and variants of that name, including in function names), it also (essentially transparently) means C<UTF-EBCDIC>. But the ordinals of characters differ between ASCII, EBCDIC, and the UTF- encodings, and a string encoded in UTF-EBCDIC may occupy a different number of bytes than in UTF-8. The listing below is alphabetical, case insensitive. =head1 Array Manipulation Functions =over 8 =item av_clear X<av_clear> Frees the all the elements of an array, leaving it empty. The XS equivalent of C<@array = ()>. See also L</av_undef>. Note that it is possible that the actions of a destructor called directly or indirectly by freeing an element of the array could cause the reference count of the array itself to be reduced (e.g. by deleting an entry in the symbol table). So it is a possibility that the AV could have been freed (or even reallocated) on return from the call unless you hold a reference to it. void av_clear(AV *av) =for hackers Found in file av.c =item av_create_and_push X<av_create_and_push> NOTE: this function is experimental and may change or be removed without notice. Push an SV onto the end of the array, creating the array if necessary. A small internal helper function to remove a commonly duplicated idiom. NOTE: this function must be explicitly called as Perl_av_create_and_push with an aTHX_ parameter. void Perl_av_create_and_push(pTHX_ AV **const avp, SV *const val) =for hackers Found in file av.c =item av_create_and_unshift_one X<av_create_and_unshift_one> NOTE: this function is experimental and may change or be removed without notice. Unshifts an SV onto the beginning of the array, creating the array if necessary. A small internal helper function to remove a commonly duplicated idiom. NOTE: this function must be explicitly called as Perl_av_create_and_unshift_one with an aTHX_ parameter. SV** Perl_av_create_and_unshift_one(pTHX_ AV **const avp, SV *const val) =for hackers Found in file av.c =item av_delete X<av_delete> Deletes the element indexed by C<key> from the array, makes the element mortal, and returns it. If C<flags> equals C<G_DISCARD>, the element is freed and NULL is returned. NULL is also returned if C<key> is out of range. Perl equivalent: S<C<splice(@myarray, $key, 1, undef)>> (with the C<splice> in void context if C<G_DISCARD> is present). SV* av_delete(AV *av, SSize_t key, I32 flags) =for hackers Found in file av.c =item av_exists X<av_exists> Returns true if the element indexed by C<key> has been initialized. This relies on the fact that uninitialized array elements are set to C<NULL>. Perl equivalent: C<exists($myarray[$key])>. bool av_exists(AV *av, SSize_t key) =for hackers Found in file av.c =item av_extend X<av_extend> Pre-extend an array so that it is capable of storing values at indexes C<0..key>. Thus C<av_extend(av,99)> guarantees that the array can store 100 elements, i.e. that C<av_store(av, 0, sv)> through C<av_store(av, 99, sv)> on a plain array will work without any further memory allocation. If the av argument is a tied array then will call the C<EXTEND> tied array method with an argument of C<(key+1)>. void av_extend(AV *av, SSize_t key) =for hackers Found in file av.c =item av_fetch X<av_fetch> Returns the SV at the specified index in the array. The C<key> is the index. If lval is true, you are guaranteed to get a real SV back (in case it wasn't real before), which you can then modify. Check that the return value is non-null before dereferencing it to a C<SV*>. See L<perlguts/"Understanding the Magic of Tied Hashes and Arrays"> for more information on how to use this function on tied arrays. The rough perl equivalent is C<$myarray[$key]>. SV** av_fetch(AV *av, SSize_t key, I32 lval) =for hackers Found in file av.c =item AvFILL X<AvFILL> Same as C<av_top_index()> or C<av_tindex()>. int AvFILL(AV* av) =for hackers Found in file av.h =item av_fill X<av_fill> Set the highest index in the array to the given number, equivalent to Perl's S<C<$#array = $fill;>>. The number of elements in the array will be S<C<fill + 1>> after C<av_fill()> returns. If the array was previously shorter, then the additional elements appended are set to NULL. If the array was longer, then the excess elements are freed. S<C<av_fill(av, -1)>> is the same as C<av_clear(av)>. void av_fill(AV *av, SSize_t fill) =for hackers Found in file av.c =item av_len X<av_len> Same as L</av_top_index>. Note that, unlike what the name implies, it returns the highest index in the array. This is unlike L</sv_len>, which returns what you would expect. B<To get the true number of elements in the array, instead use C<L</av_count>>>. SSize_t av_len(AV *av) =for hackers Found in file av.c =item av_make X<av_make> Creates a new AV and populates it with a list of SVs. The SVs are copied into the array, so they may be freed after the call to C<av_make>. The new AV will have a reference count of 1. Perl equivalent: C<my @new_array = ($scalar1, $scalar2, $scalar3...);> AV* av_make(SSize_t size, SV **strp) =for hackers Found in file av.c =item av_pop X<av_pop> Removes one SV from the end of the array, reducing its size by one and returning the SV (transferring control of one reference count) to the caller. Returns C<&PL_sv_undef> if the array is empty. Perl equivalent: C<pop(@myarray);> SV* av_pop(AV *av) =for hackers Found in file av.c =item av_push X<av_push> Pushes an SV (transferring control of one reference count) onto the end of the array. The array will grow automatically to accommodate the addition. Perl equivalent: C<push @myarray, $val;>. void av_push(AV *av, SV *val) =for hackers Found in file av.c =item av_shift X<av_shift> Removes one SV from the start of the array, reducing its size by one and returning the SV (transferring control of one reference count) to the caller. Returns C<&PL_sv_undef> if the array is empty. Perl equivalent: C<shift(@myarray);> SV* av_shift(AV *av) =for hackers Found in file av.c =item av_store X<av_store> Stores an SV in an array. The array index is specified as C<key>. The return value will be C<NULL> if the operation failed or if the value did not need to be actually stored within the array (as in the case of tied arrays). Otherwise, it can be dereferenced to get the C<SV*> that was stored there (= C<val>)). Note that the caller is responsible for suitably incrementing the reference count of C<val> before the call, and decrementing it if the function returned C<NULL>. Approximate Perl equivalent: C<splice(@myarray, $key, 1, $val)>. See L<perlguts/"Understanding the Magic of Tied Hashes and Arrays"> for more information on how to use this function on tied arrays. SV** av_store(AV *av, SSize_t key, SV *val) =for hackers Found in file av.c =item av_tindex X<av_tindex> Same as C<av_top_index()>. SSize_t av_tindex(AV *av) =for hackers Found in file av.h =item av_top_index X<av_top_index> Returns the highest index in the array. The number of elements in the array is S<C<av_top_index(av) + 1>>. Returns -1 if the array is empty. The Perl equivalent for this is C<$#myarray>. (A slightly shorter form is C<av_tindex>.) SSize_t av_top_index(AV *av) =for hackers Found in file av.c =item av_undef X<av_undef> Undefines the array. The XS equivalent of C<undef(@array)>. As well as freeing all the elements of the array (like C<av_clear()>), this also frees the memory used by the av to store its list of scalars. See L</av_clear> for a note about the array possibly being invalid on return. void av_undef(AV *av) =for hackers Found in file av.c =item av_unshift X<av_unshift> Unshift the given number of C<undef> values onto the beginning of the array. The array will grow automatically to accommodate the addition. Perl equivalent: S<C<unshift @myarray, ((undef) x $num);>> void av_unshift(AV *av, SSize_t num) =for hackers Found in file av.c =item get_av X<get_av> Returns the AV of the specified Perl global or package array with the given name (so it won't work on lexical variables). C<flags> are passed to C<gv_fetchpv>. If C<GV_ADD> is set and the Perl variable does not exist then it will be created. If C<flags> is zero and the variable does not exist then NULL is returned. Perl equivalent: C<@{"$name"}>. NOTE: the perl_ form of this function is deprecated. AV* get_av(const char *name, I32 flags) =for hackers Found in file perl.c =item newAV X<newAV> Creates a new AV. The reference count is set to 1. Perl equivalent: C<my @array;>. AV* newAV() =for hackers Found in file av.h =item sortsv X<sortsv> In-place sort an array of SV pointers with the given comparison routine. Currently this always uses mergesort. See C<L</sortsv_flags>> for a more flexible routine. void sortsv(SV** array, size_t num_elts, SVCOMPARE_t cmp) =for hackers Found in file pp_sort.c =back =head1 Callback Functions =over 8 =item call_argv X<call_argv> Performs a callback to the specified named and package-scoped Perl subroutine with C<argv> (a C<NULL>-terminated array of strings) as arguments. See L<perlcall>. Approximate Perl equivalent: C<&{"$sub_name"}(@$argv)>. NOTE: the perl_ form of this function is deprecated. I32 call_argv(const char* sub_name, I32 flags, char** argv) =for hackers Found in file perl.c =item call_method X<call_method> Performs a callback to the specified Perl method. The blessed object must be on the stack. See L<perlcall>. NOTE: the perl_ form of this function is deprecated. I32 call_method(const char* methname, I32 flags) =for hackers Found in file perl.c =item call_pv X<call_pv> Performs a callback to the specified Perl sub. See L<perlcall>. NOTE: the perl_ form of this function is deprecated. I32 call_pv(const char* sub_name, I32 flags) =for hackers Found in file perl.c =item call_sv X<call_sv> Performs a callback to the Perl sub specified by the SV. If neither the C<G_METHOD> nor C<G_METHOD_NAMED> flag is supplied, the SV may be any of a CV, a GV, a reference to a CV, a reference to a GV or C<SvPV(sv)> will be used as the name of the sub to call. If the C<G_METHOD> flag is supplied, the SV may be a reference to a CV or C<SvPV(sv)> will be used as the name of the method to call. If the C<G_METHOD_NAMED> flag is supplied, C<SvPV(sv)> will be used as the name of the method to call. Some other values are treated specially for internal use and should not be depended on. See L<perlcall>. NOTE: the perl_ form of this function is deprecated. I32 call_sv(SV* sv, volatile I32 flags) =for hackers Found in file perl.c =item ENTER X<ENTER> Opening bracket on a callback. See C<L</LEAVE>> and L<perlcall>. ENTER; =for hackers Found in file scope.h =item ENTER_with_name X<ENTER_with_name> Same as C<L</ENTER>>, but when debugging is enabled it also associates the given literal string with the new scope. ENTER_with_name("name"); =for hackers Found in file scope.h =item eval_pv X<eval_pv> Tells Perl to C<eval> the given string in scalar context and return an SV* result. NOTE: the perl_ form of this function is deprecated. SV* eval_pv(const char* p, I32 croak_on_error) =for hackers Found in file perl.c =item eval_sv X<eval_sv> Tells Perl to C<eval> the string in the SV. It supports the same flags as C<call_sv>, with the obvious exception of C<G_EVAL>. See L<perlcall>. The C<G_RETHROW> flag can be used if you only need eval_sv() to execute code specified by a string, but not catch any errors. NOTE: the perl_ form of this function is deprecated. I32 eval_sv(SV* sv, I32 flags) =for hackers Found in file perl.c =item FREETMPS X<FREETMPS> Closing bracket for temporaries on a callback. See C<L</SAVETMPS>> and L<perlcall>. FREETMPS; =for hackers Found in file scope.h =item LEAVE X<LEAVE> Closing bracket on a callback. See C<L</ENTER>> and L<perlcall>. LEAVE; =for hackers Found in file scope.h =item LEAVE_with_name X<LEAVE_with_name> Same as C<L</LEAVE>>, but when debugging is enabled it first checks that the scope has the given name. C<name> must be a literal string. LEAVE_with_name("name"); =for hackers Found in file scope.h =item SAVETMPS X<SAVETMPS> Opening bracket for temporaries on a callback. See C<L</FREETMPS>> and L<perlcall>. SAVETMPS; =for hackers Found in file scope.h =back =head1 Character case changing Perl uses "full" Unicode case mappings. This means that converting a single character to another case may result in a sequence of more than one character. For example, the uppercase of C<E<223>> (LATIN SMALL LETTER SHARP S) is the two character sequence C<SS>. This presents some complications The lowercase of all characters in the range 0..255 is a single character, and thus C<L</toLOWER_L1>> is furnished. But, C<toUPPER_L1> can't exist, as it couldn't return a valid result for all legal inputs. Instead C<L</toUPPER_uvchr>> has an API that does allow every possible legal result to be returned.) Likewise no other function that is crippled by not being able to give the correct results for the full range of possible inputs has been implemented here. =over 8 =item toFOLD X<toFOLD> Converts the specified character to foldcase. If the input is anything but an ASCII uppercase character, that input character itself is returned. Variant C<toFOLD_A> is equivalent. (There is no equivalent C<to_FOLD_L1> for the full Latin1 range, as the full generality of L</toFOLD_uvchr> is needed there.) U8 toFOLD(U8 ch) =for hackers Found in file handy.h =item toFOLD_utf8 X<toFOLD_utf8> Converts the first UTF-8 encoded character in the sequence starting at C<p> and extending no further than S<C<e - 1>> to its foldcase version, and stores that in UTF-8 in C<s>, and its length in bytes in C<lenp>. Note that the buffer pointed to by C<s> needs to be at least C<UTF8_MAXBYTES_CASE+1> bytes since the foldcase version may be longer than the original character. The first code point of the foldcased version is returned (but note, as explained at L<the top of this section|/Character case changing>, that there may be more). It will not attempt to read beyond S<C<e - 1>>, provided that the constraint S<C<s E<lt> e>> is true (this is asserted for in C<-DDEBUGGING> builds). If the UTF-8 for the input character is malformed in some way, the program may croak, or the function may return the REPLACEMENT CHARACTER, at the discretion of the implementation, and subject to change in future releases. UV toFOLD_utf8(U8* p, U8* e, U8* s, STRLEN* lenp) =for hackers Found in file handy.h =item toFOLD_utf8_safe X<toFOLD_utf8_safe> Same as L</toFOLD_utf8>. UV toFOLD_utf8_safe(U8* p, U8* e, U8* s, STRLEN* lenp) =for hackers Found in file handy.h =item toFOLD_uvchr X<toFOLD_uvchr> Converts the code point C<cp> to its foldcase version, and stores that in UTF-8 in C<s>, and its length in bytes in C<lenp>. The code point is interpreted as native if less than 256; otherwise as Unicode. Note that the buffer pointed to by C<s> needs to be at least C<UTF8_MAXBYTES_CASE+1> bytes since the foldcase version may be longer than the original character. The first code point of the foldcased version is returned (but note, as explained at L<the top of this section|/Character case changing>, that there may be more). UV toFOLD_uvchr(UV cp, U8* s, STRLEN* lenp) =for hackers Found in file handy.h =item toLOWER X<toLOWER> Converts the specified character to lowercase. If the input is anything but an ASCII uppercase character, that input character itself is returned. Variant C<toLOWER_A> is equivalent. U8 toLOWER(U8 ch) =for hackers Found in file handy.h =item toLOWER_L1 X<toLOWER_L1> Converts the specified Latin1 character to lowercase. The results are undefined if the input doesn't fit in a byte. U8 toLOWER_L1(U8 ch) =for hackers Found in file handy.h =item toLOWER_LC X<toLOWER_LC> Converts the specified character to lowercase using the current locale's rules, if possible; otherwise returns the input character itself. U8 toLOWER_LC(U8 ch) =for hackers Found in file handy.h =item toLOWER_utf8 X<toLOWER_utf8> Converts the first UTF-8 encoded character in the sequence starting at C<p> and extending no further than S<C<e - 1>> to its lowercase version, and stores that in UTF-8 in C<s>, and its length in bytes in C<lenp>. Note that the buffer pointed to by C<s> needs to be at least C<UTF8_MAXBYTES_CASE+1> bytes since the lowercase version may be longer than the original character. The first code point of the lowercased version is returned (but note, as explained at L<the top of this section|/Character case changing>, that there may be more). It will not attempt to read beyond S<C<e - 1>>, provided that the constraint S<C<s E<lt> e>> is true (this is asserted for in C<-DDEBUGGING> builds). If the UTF-8 for the input character is malformed in some way, the program may croak, or the function may return the REPLACEMENT CHARACTER, at the discretion of the implementation, and subject to change in future releases. UV toLOWER_utf8(U8* p, U8* e, U8* s, STRLEN* lenp) =for hackers Found in file handy.h =item toLOWER_utf8_safe X<toLOWER_utf8_safe> Same as L</toLOWER_utf8>. UV toLOWER_utf8_safe(U8* p, U8* e, U8* s, STRLEN* lenp) =for hackers Found in file handy.h =item toLOWER_uvchr X<toLOWER_uvchr> Converts the code point C<cp> to its lowercase version, and stores that in UTF-8 in C<s>, and its length in bytes in C<lenp>. The code point is interpreted as native if less than 256; otherwise as Unicode. Note that the buffer pointed to by C<s> needs to be at least C<UTF8_MAXBYTES_CASE+1> bytes since the lowercase version may be longer than the original character. The first code point of the lowercased version is returned (but note, as explained at L<the top of this section|/Character case changing>, that there may be more). UV toLOWER_uvchr(UV cp, U8* s, STRLEN* lenp) =for hackers Found in file handy.h =item toTITLE X<toTITLE> Converts the specified character to titlecase. If the input is anything but an ASCII lowercase character, that input character itself is returned. Variant C<toTITLE_A> is equivalent. (There is no C<toTITLE_L1> for the full Latin1 range, as the full generality of L</toTITLE_uvchr> is needed there. Titlecase is not a concept used in locale handling, so there is no functionality for that.) U8 toTITLE(U8 ch) =for hackers Found in file handy.h =item toTITLE_utf8 X<toTITLE_utf8> Converts the first UTF-8 encoded character in the sequence starting at C<p> and extending no further than S<C<e - 1>> to its titlecase version, and stores that in UTF-8 in C<s>, and its length in bytes in C<lenp>. Note that the buffer pointed to by C<s> needs to be at least C<UTF8_MAXBYTES_CASE+1> bytes since the titlecase version may be longer than the original character. The first code point of the titlecased version is returned (but note, as explained at L<the top of this section|/Character case changing>, that there may be more). It will not attempt to read beyond S<C<e - 1>>, provided that the constraint S<C<s E<lt> e>> is true (this is asserted for in C<-DDEBUGGING> builds). If the UTF-8 for the input character is malformed in some way, the program may croak, or the function may return the REPLACEMENT CHARACTER, at the discretion of the implementation, and subject to change in future releases. UV toTITLE_utf8(U8* p, U8* e, U8* s, STRLEN* lenp) =for hackers Found in file handy.h =item toTITLE_utf8_safe X<toTITLE_utf8_safe> Same as L</toTITLE_utf8>. UV toTITLE_utf8_safe(U8* p, U8* e, U8* s, STRLEN* lenp) =for hackers Found in file handy.h =item toTITLE_uvchr X<toTITLE_uvchr> Converts the code point C<cp> to its titlecase version, and stores that in UTF-8 in C<s>, and its length in bytes in C<lenp>. The code point is interpreted as native if less than 256; otherwise as Unicode. Note that the buffer pointed to by C<s> needs to be at least C<UTF8_MAXBYTES_CASE+1> bytes since the titlecase version may be longer than the original character. The first code point of the titlecased version is returned (but note, as explained at L<the top of this section|/Character case changing>, that there may be more). UV toTITLE_uvchr(UV cp, U8* s, STRLEN* lenp) =for hackers Found in file handy.h =item toUPPER X<toUPPER> Converts the specified character to uppercase. If the input is anything but an ASCII lowercase character, that input character itself is returned. Variant C<toUPPER_A> is equivalent. U8 toUPPER(int ch) =for hackers Found in file handy.h =item toUPPER_utf8 X<toUPPER_utf8> Converts the first UTF-8 encoded character in the sequence starting at C<p> and extending no further than S<C<e - 1>> to its uppercase version, and stores that in UTF-8 in C<s>, and its length in bytes in C<lenp>. Note that the buffer pointed to by C<s> needs to be at least C<UTF8_MAXBYTES_CASE+1> bytes since the uppercase version may be longer than the original character. The first code point of the uppercased version is returned (but note, as explained at L<the top of this section|/Character case changing>, that there may be more). It will not attempt to read beyond S<C<e - 1>>, provided that the constraint S<C<s E<lt> e>> is true (this is asserted for in C<-DDEBUGGING> builds). If the UTF-8 for the input character is malformed in some way, the program may croak, or the function may return the REPLACEMENT CHARACTER, at the discretion of the implementation, and subject to change in future releases. UV toUPPER_utf8(U8* p, U8* e, U8* s, STRLEN* lenp) =for hackers Found in file handy.h =item toUPPER_utf8_safe X<toUPPER_utf8_safe> Same as L</toUPPER_utf8>. UV toUPPER_utf8_safe(U8* p, U8* e, U8* s, STRLEN* lenp) =for hackers Found in file handy.h =item toUPPER_uvchr X<toUPPER_uvchr> Converts the code point C<cp> to its uppercase version, and stores that in UTF-8 in C<s>, and its length in bytes in C<lenp>. The code point is interpreted as native if less than 256; otherwise as Unicode. Note that the buffer pointed to by C<s> needs to be at least C<UTF8_MAXBYTES_CASE+1> bytes since the uppercase version may be longer than the original character. The first code point of the uppercased version is returned (but note, as explained at L<the top of this section|/Character case changing>, that there may be more.) UV toUPPER_uvchr(UV cp, U8* s, STRLEN* lenp) =for hackers Found in file handy.h =item WIDEST_UTYPE X<WIDEST_UTYPE> Yields the widest unsigned integer type on the platform, currently either C<U32> or C<64>. This can be used in declarations such as WIDEST_UTYPE my_uv; or casts my_uv = (WIDEST_UTYPE) val; =for hackers Found in file handy.h =back =head1 Character classification This section is about functions (really macros) that classify characters into types, such as punctuation versus alphabetic, etc. Most of these are analogous to regular expression character classes. (See L<perlrecharclass/POSIX Character Classes>.) There are several variants for each class. (Not all macros have all variants; each item below lists the ones valid for it.) None are affected by C<use bytes>, and only the ones with C<LC> in the name are affected by the current locale. The base function, e.g., C<isALPHA()>, takes any signed or unsigned value, treating it as a code point, and returns a boolean as to whether or not the character represented by it is (or on non-ASCII platforms, corresponds to) an ASCII character in the named class based on platform, Unicode, and Perl rules. If the input is a number that doesn't fit in an octet, FALSE is returned. Variant C<isI<FOO>_A> (e.g., C<isALPHA_A()>) is identical to the base function with no suffix C<"_A">. This variant is used to emphasize by its name that only ASCII-range characters can return TRUE. Variant C<isI<FOO>_L1> imposes the Latin-1 (or EBCDIC equivalent) character set onto the platform. That is, the code points that are ASCII are unaffected, since ASCII is a subset of Latin-1. But the non-ASCII code points are treated as if they are Latin-1 characters. For example, C<isWORDCHAR_L1()> will return true when called with the code point 0xDF, which is a word character in both ASCII and EBCDIC (though it represents different characters in each). If the input is a number that doesn't fit in an octet, FALSE is returned. (Perl's documentation uses a colloquial definition of Latin-1, to include all code points below 256.) Variant C<isI<FOO>_uvchr> is exactly like the C<isI<FOO>_L1> variant, for inputs below 256, but if the code point is larger than 255, Unicode rules are used to determine if it is in the character class. For example, C<isWORDCHAR_uvchr(0x100)> returns TRUE, since 0x100 is LATIN CAPITAL LETTER A WITH MACRON in Unicode, and is a word character. Variants C<isI<FOO>_utf8> and C<isI<FOO>_utf8_safe> are like C<isI<FOO>_uvchr>, but are used for UTF-8 encoded strings. The two forms are different names for the same thing. Each call to one of these classifies the first character of the string starting at C<p>. The second parameter, C<e>, points to anywhere in the string beyond the first character, up to one byte past the end of the entire string. Although both variants are identical, the suffix C<_safe> in one name emphasizes that it will not attempt to read beyond S<C<e - 1>>, provided that the constraint S<C<s E<lt> e>> is true (this is asserted for in C<-DDEBUGGING> builds). If the UTF-8 for the input character is malformed in some way, the program may croak, or the function may return FALSE, at the discretion of the implementation, and subject to change in future releases. Variant C<isI<FOO>_LC> is like the C<isI<FOO>_A> and C<isI<FOO>_L1> variants, but the result is based on the current locale, which is what C<LC> in the name stands for. If Perl can determine that the current locale is a UTF-8 locale, it uses the published Unicode rules; otherwise, it uses the C library function that gives the named classification. For example, C<isDIGIT_LC()> when not in a UTF-8 locale returns the result of calling C<isdigit()>. FALSE is always returned if the input won't fit into an octet. On some platforms where the C library function is known to be defective, Perl changes its result to follow the POSIX standard's rules. Variant C<isI<FOO>_LC_uvchr> acts exactly like C<isI<FOO>_LC> for inputs less than 256, but for larger ones it returns the Unicode classification of the code point. Variants C<isI<FOO>_LC_utf8> and C<isI<FOO>_LC_utf8_safe> are like C<isI<FOO>_LC_uvchr>, but are used for UTF-8 encoded strings. The two forms are different names for the same thing. Each call to one of these classifies the first character of the string starting at C<p>. The second parameter, C<e>, points to anywhere in the string beyond the first character, up to one byte past the end of the entire string. Although both variants are identical, the suffix C<_safe> in one name emphasizes that it will not attempt to read beyond S<C<e - 1>>, provided that the constraint S<C<s E<lt> e>> is true (this is asserted for in C<-DDEBUGGING> builds). If the UTF-8 for the input character is malformed in some way, the program may croak, or the function may return FALSE, at the discretion of the implementation, and subject to change in future releases. =over 8 =item isALPHA X<isALPHA> Returns a boolean indicating whether the specified input is one of C<[A-Za-z]>, analogous to C<m/[[:alpha:]]/>. See the L<top of this section|/Character classification> for an explanation of variants C<isALPHA_A>, C<isALPHA_L1>, C<isALPHA_uvchr>, C<isALPHA_utf8>, C<isALPHA_utf8_safe>, C<isALPHA_LC>, C<isALPHA_LC_uvchr>, C<isALPHA_LC_utf8>, and C<isALPHA_LC_utf8_safe>. bool isALPHA(int ch) =for hackers Found in file handy.h =item isALPHANUMERIC X<isALPHANUMERIC> Returns a boolean indicating whether the specified character is one of C<[A-Za-z0-9]>, analogous to C<m/[[:alnum:]]/>. See the L<top of this section|/Character classification> for an explanation of variants C<isALPHANUMERIC_A>, C<isALPHANUMERIC_L1>, C<isALPHANUMERIC_uvchr>, C<isALPHANUMERIC_utf8>, C<isALPHANUMERIC_utf8_safe>, C<isALPHANUMERIC_LC>, C<isALPHANUMERIC_LC_uvchr>, C<isALPHANUMERIC_LC_utf8>, and C<isALPHANUMERIC_LC_utf8_safe>. A (discouraged from use) synonym is C<isALNUMC> (where the C<C> suffix means this corresponds to the C language alphanumeric definition). Also there are the variants C<isALNUMC_A>, C<isALNUMC_L1> C<isALNUMC_LC>, and C<isALNUMC_LC_uvchr>. bool isALPHANUMERIC(int ch) =for hackers Found in file handy.h =item isASCII X<isASCII> Returns a boolean indicating whether the specified character is one of the 128 characters in the ASCII character set, analogous to C<m/[[:ascii:]]/>. On non-ASCII platforms, it returns TRUE iff this character corresponds to an ASCII character. Variants C<isASCII_A()> and C<isASCII_L1()> are identical to C<isASCII()>. See the L<top of this section|/Character classification> for an explanation of variants C<isASCII_uvchr>, C<isASCII_utf8>, C<isASCII_utf8_safe>, C<isASCII_LC>, C<isASCII_LC_uvchr>, C<isASCII_LC_utf8>, and C<isASCII_LC_utf8_safe>. Note, however, that some platforms do not have the C library routine C<isascii()>. In these cases, the variants whose names contain C<LC> are the same as the corresponding ones without. bool isASCII(int ch) =for hackers Found in file handy.h =item isBLANK X<isBLANK> Returns a boolean indicating whether the specified character is a character considered to be a blank, analogous to C<m/[[:blank:]]/>. See the L<top of this section|/Character classification> for an explanation of variants C<isBLANK_A>, C<isBLANK_L1>, C<isBLANK_uvchr>, C<isBLANK_utf8>, C<isBLANK_utf8_safe>, C<isBLANK_LC>, C<isBLANK_LC_uvchr>, C<isBLANK_LC_utf8>, and C<isBLANK_LC_utf8_safe>. Note, however, that some platforms do not have the C library routine C<isblank()>. In these cases, the variants whose names contain C<LC> are the same as the corresponding ones without. bool isBLANK(char ch) =for hackers Found in file handy.h =item isCNTRL X<isCNTRL> Returns a boolean indicating whether the specified character is a control character, analogous to C<m/[[:cntrl:]]/>. See the L<top of this section|/Character classification> for an explanation of variants C<isCNTRL_A>, C<isCNTRL_L1>, C<isCNTRL_uvchr>, C<isCNTRL_utf8>, C<isCNTRL_utf8_safe>, C<isCNTRL_LC>, C<isCNTRL_LC_uvchr>, C<isCNTRL_LC_utf8> and C<isCNTRL_LC_utf8_safe>. On EBCDIC platforms, you almost always want to use the C<isCNTRL_L1> variant. bool isCNTRL(char ch) =for hackers Found in file handy.h =item isDIGIT X<isDIGIT> Returns a boolean indicating whether the specified character is a digit, analogous to C<m/[[:digit:]]/>. Variants C<isDIGIT_A> and C<isDIGIT_L1> are identical to C<isDIGIT>. See the L<top of this section|/Character classification> for an explanation of variants C<isDIGIT_uvchr>, C<isDIGIT_utf8>, C<isDIGIT_utf8_safe>, C<isDIGIT_LC>, C<isDIGIT_LC_uvchr>, C<isDIGIT_LC_utf8>, and C<isDIGIT_LC_utf8_safe>. bool isDIGIT(char ch) =for hackers Found in file handy.h =item isGRAPH X<isGRAPH> Returns a boolean indicating whether the specified character is a graphic character, analogous to C<m/[[:graph:]]/>. See the L<top of this section|/Character classification> for an explanation of variants C<isGRAPH_A>, C<isGRAPH_L1>, C<isGRAPH_uvchr>, C<isGRAPH_utf8>, C<isGRAPH_utf8_safe>, C<isGRAPH_LC>, C<isGRAPH_LC_uvchr>, C<isGRAPH_LC_utf8_safe>, and C<isGRAPH_LC_utf8_safe>. bool isGRAPH(char ch) =for hackers Found in file handy.h =item isIDCONT X<isIDCONT> Returns a boolean indicating whether the specified character can be the second or succeeding character of an identifier. This is very close to, but not quite the same as the official Unicode property C<XID_Continue>. The difference is that this returns true only if the input character also matches L</isWORDCHAR>. See the L<top of this section|/Character classification> for an explanation of variants C<isIDCONT_A>, C<isIDCONT_L1>, C<isIDCONT_uvchr>, C<isIDCONT_utf8>, C<isIDCONT_utf8_safe>, C<isIDCONT_LC>, C<isIDCONT_LC_uvchr>, C<isIDCONT_LC_utf8>, and C<isIDCONT_LC_utf8_safe>. bool isIDCONT(char ch) =for hackers Found in file handy.h =item isIDFIRST X<isIDFIRST> Returns a boolean indicating whether the specified character can be the first character of an identifier. This is very close to, but not quite the same as the official Unicode property C<XID_Start>. The difference is that this returns true only if the input character also matches L</isWORDCHAR>. See the L<top of this section|/Character classification> for an explanation of variants C<isIDFIRST_A>, C<isIDFIRST_L1>, C<isIDFIRST_uvchr>, C<isIDFIRST_utf8>, C<isIDFIRST_utf8_safe>, C<isIDFIRST_LC>, C<isIDFIRST_LC_uvchr>, C<isIDFIRST_LC_utf8>, and C<isIDFIRST_LC_utf8_safe>. bool isIDFIRST(char ch) =for hackers Found in file handy.h =item isLOWER X<isLOWER> Returns a boolean indicating whether the specified character is a lowercase character, analogous to C<m/[[:lower:]]/>. See the L<top of this section|/Character classification> for an explanation of variants C<isLOWER_A>, C<isLOWER_L1>, C<isLOWER_uvchr>, C<isLOWER_utf8>, C<isLOWER_utf8_safe>, C<isLOWER_LC>, C<isLOWER_LC_uvchr>, C<isLOWER_LC_utf8>, and C<isLOWER_LC_utf8_safe>. bool isLOWER(char ch) =for hackers Found in file handy.h =item isOCTAL X<isOCTAL> Returns a boolean indicating whether the specified character is an octal digit, [0-7]. The only two variants are C<isOCTAL_A> and C<isOCTAL_L1>; each is identical to C<isOCTAL>. bool isOCTAL(char ch) =for hackers Found in file handy.h =item isPRINT X<isPRINT> Returns a boolean indicating whether the specified character is a printable character, analogous to C<m/[[:print:]]/>. See the L<top of this section|/Character classification> for an explanation of variants C<isPRINT_A>, C<isPRINT_L1>, C<isPRINT_uvchr>, C<isPRINT_utf8>, C<isPRINT_utf8_safe>, C<isPRINT_LC>, C<isPRINT_LC_uvchr>, C<isPRINT_LC_utf8>, and C<isPRINT_LC_utf8_safe>. bool isPRINT(char ch) =for hackers Found in file handy.h =item isPSXSPC X<isPSXSPC> (short for Posix Space) Starting in 5.18, this is identical in all its forms to the corresponding C<isSPACE()> macros. The locale forms of this macro are identical to their corresponding C<isSPACE()> forms in all Perl releases. In releases prior to 5.18, the non-locale forms differ from their C<isSPACE()> forms only in that the C<isSPACE()> forms don't match a Vertical Tab, and the C<isPSXSPC()> forms do. Otherwise they are identical. Thus this macro is analogous to what C<m/[[:space:]]/> matches in a regular expression. See the L<top of this section|/Character classification> for an explanation of variants C<isPSXSPC_A>, C<isPSXSPC_L1>, C<isPSXSPC_uvchr>, C<isPSXSPC_utf8>, C<isPSXSPC_utf8_safe>, C<isPSXSPC_LC>, C<isPSXSPC_LC_uvchr>, C<isPSXSPC_LC_utf8>, and C<isPSXSPC_LC_utf8_safe>. bool isPSXSPC(char ch) =for hackers Found in file handy.h =item isPUNCT X<isPUNCT> Returns a boolean indicating whether the specified character is a punctuation character, analogous to C<m/[[:punct:]]/>. Note that the definition of what is punctuation isn't as straightforward as one might desire. See L<perlrecharclass/POSIX Character Classes> for details. See the L<top of this section|/Character classification> for an explanation of variants C<isPUNCT_A>, C<isPUNCT_L1>, C<isPUNCT_uvchr>, C<isPUNCT_utf8>, C<isPUNCT_utf8_safe>, C<isPUNCT_LC>, C<isPUNCT_LC_uvchr>, C<isPUNCT_LC_utf8>, and C<isPUNCT_LC_utf8_safe>. bool isPUNCT(char ch) =for hackers Found in file handy.h =item isSPACE X<isSPACE> Returns a boolean indicating whether the specified character is a whitespace character. This is analogous to what C<m/\s/> matches in a regular expression. Starting in Perl 5.18 this also matches what C<m/[[:space:]]/> does. Prior to 5.18, only the locale forms of this macro (the ones with C<LC> in their names) matched precisely what C<m/[[:space:]]/> does. In those releases, the only difference, in the non-locale variants, was that C<isSPACE()> did not match a vertical tab. (See L</isPSXSPC> for a macro that matches a vertical tab in all releases.) See the L<top of this section|/Character classification> for an explanation of variants C<isSPACE_A>, C<isSPACE_L1>, C<isSPACE_uvchr>, C<isSPACE_utf8>, C<isSPACE_utf8_safe>, C<isSPACE_LC>, C<isSPACE_LC_uvchr>, C<isSPACE_LC_utf8>, and C<isSPACE_LC_utf8_safe>. bool isSPACE(char ch) =for hackers Found in file handy.h =item isUPPER X<isUPPER> Returns a boolean indicating whether the specified character is an uppercase character, analogous to C<m/[[:upper:]]/>. See the L<top of this section|/Character classification> for an explanation of variants C<isUPPER_A>, C<isUPPER_L1>, C<isUPPER_uvchr>, C<isUPPER_utf8>, C<isUPPER_utf8_safe>, C<isUPPER_LC>, C<isUPPER_LC_uvchr>, C<isUPPER_LC_utf8>, and C<isUPPER_LC_utf8_safe>. bool isUPPER(char ch) =for hackers Found in file handy.h =item isWORDCHAR X<isWORDCHAR> Returns a boolean indicating whether the specified character is a character that is a word character, analogous to what C<m/\w/> and C<m/[[:word:]]/> match in a regular expression. A word character is an alphabetic character, a decimal digit, a connecting punctuation character (such as an underscore), or a "mark" character that attaches to one of those (like some sort of accent). C<isALNUM()> is a synonym provided for backward compatibility, even though a word character includes more than the standard C language meaning of alphanumeric. See the L<top of this section|/Character classification> for an explanation of variants C<isWORDCHAR_A>, C<isWORDCHAR_L1>, C<isWORDCHAR_uvchr>, C<isWORDCHAR_utf8>, and C<isWORDCHAR_utf8_safe>. C<isWORDCHAR_LC>, C<isWORDCHAR_LC_uvchr>, C<isWORDCHAR_LC_utf8>, and C<isWORDCHAR_LC_utf8_safe> are also as described there, but additionally include the platform's native underscore. bool isWORDCHAR(char ch) =for hackers Found in file handy.h =item isXDIGIT X<isXDIGIT> Returns a boolean indicating whether the specified character is a hexadecimal digit. In the ASCII range these are C<[0-9A-Fa-f]>. Variants C<isXDIGIT_A()> and C<isXDIGIT_L1()> are identical to C<isXDIGIT()>. See the L<top of this section|/Character classification> for an explanation of variants C<isXDIGIT_uvchr>, C<isXDIGIT_utf8>, C<isXDIGIT_utf8_safe>, C<isXDIGIT_LC>, C<isXDIGIT_LC_uvchr>, C<isXDIGIT_LC_utf8>, and C<isXDIGIT_LC_utf8_safe>. bool isXDIGIT(char ch) =for hackers Found in file handy.h =back =head1 Cloning an interpreter =over 8 =item perl_clone X<perl_clone> Create and return a new interpreter by cloning the current one. C<perl_clone> takes these flags as parameters: C<CLONEf_COPY_STACKS> - is used to, well, copy the stacks also, without it we only clone the data and zero the stacks, with it we copy the stacks and the new perl interpreter is ready to run at the exact same point as the previous one. The pseudo-fork code uses C<COPY_STACKS> while the threads->create doesn't. C<CLONEf_KEEP_PTR_TABLE> - C<perl_clone> keeps a ptr_table with the pointer of the old variable as a key and the new variable as a value, this allows it to check if something has been cloned and not clone it again, but rather just use the value and increase the refcount. If C<KEEP_PTR_TABLE> is not set then C<perl_clone> will kill the ptr_table using the function S<C<ptr_table_free(PL_ptr_table); PL_ptr_table = NULL;>>. A reason to keep it around is if you want to dup some of your own variables which are outside the graph that perl scans. C<CLONEf_CLONE_HOST> - This is a win32 thing, it is ignored on unix, it tells perl's win32host code (which is c++) to clone itself, this is needed on win32 if you want to run two threads at the same time, if you just want to do some stuff in a separate perl interpreter and then throw it away and return to the original one, you don't need to do anything. PerlInterpreter* perl_clone( PerlInterpreter *proto_perl, UV flags ) =for hackers Found in file sv.c =back =head1 Compile-time scope hooks =over 8 =item BhkDISABLE X<BhkDISABLE> NOTE: this function is experimental and may change or be removed without notice. Temporarily disable an entry in this BHK structure, by clearing the appropriate flag. C<which> is a preprocessor token indicating which entry to disable. void BhkDISABLE(BHK *hk, which) =for hackers Found in file op.h =item BhkENABLE X<BhkENABLE> NOTE: this function is experimental and may change or be removed without notice. Re-enable an entry in this BHK structure, by setting the appropriate flag. C<which> is a preprocessor token indicating which entry to enable. This will assert (under -DDEBUGGING) if the entry doesn't contain a valid pointer. void BhkENABLE(BHK *hk, which) =for hackers Found in file op.h =item BhkENTRY_set X<BhkENTRY_set> NOTE: this function is experimental and may change or be removed without notice. Set an entry in the BHK structure, and set the flags to indicate it is valid. C<which> is a preprocessing token indicating which entry to set. The type of C<ptr> depends on the entry. void BhkENTRY_set(BHK *hk, which, void *ptr) =for hackers Found in file op.h =item blockhook_register X<blockhook_register> NOTE: this function is experimental and may change or be removed without notice. Register a set of hooks to be called when the Perl lexical scope changes at compile time. See L<perlguts/"Compile-time scope hooks">. NOTE: this function must be explicitly called as Perl_blockhook_register with an aTHX_ parameter. void Perl_blockhook_register(pTHX_ BHK *hk) =for hackers Found in file op.c =back =head1 COP Hint Hashes =over 8 =item cophh_2hv X<cophh_2hv> NOTE: this function is experimental and may change or be removed without notice. Generates and returns a standard Perl hash representing the full set of key/value pairs in the cop hints hash C<cophh>. C<flags> is currently unused and must be zero. HV * cophh_2hv(const COPHH *cophh, U32 flags) =for hackers Found in file cop.h =item cophh_copy X<cophh_copy> NOTE: this function is experimental and may change or be removed without notice. Make and return a complete copy of the cop hints hash C<cophh>. COPHH * cophh_copy(COPHH *cophh) =for hackers Found in file cop.h =item cophh_delete_pv X<cophh_delete_pv> NOTE: this function is experimental and may change or be removed without notice. Like L</cophh_delete_pvn>, but takes a nul-terminated string instead of a string/length pair. COPHH * cophh_delete_pv(const COPHH *cophh, const char *key, U32 hash, U32 flags) =for hackers Found in file cop.h =item cophh_delete_pvn X<cophh_delete_pvn> NOTE: this function is experimental and may change or be removed without notice. Delete a key and its associated value from the cop hints hash C<cophh>, and returns the modified hash. The returned hash pointer is in general not the same as the hash pointer that was passed in. The input hash is consumed by the function, and the pointer to it must not be subsequently used. Use L</cophh_copy> if you need both hashes. The key is specified by C<keypv> and C<keylen>. If C<flags> has the C<COPHH_KEY_UTF8> bit set, the key octets are interpreted as UTF-8, otherwise they are interpreted as Latin-1. C<hash> is a precomputed hash of the key string, or zero if it has not been precomputed. COPHH * cophh_delete_pvn(COPHH *cophh, const char *keypv, STRLEN keylen, U32 hash, U32 flags) =for hackers Found in file cop.h =item cophh_delete_pvs X<cophh_delete_pvs> NOTE: this function is experimental and may change or be removed without notice. Like L</cophh_delete_pvn>, but takes a literal string instead of a string/length pair, and no precomputed hash. COPHH * cophh_delete_pvs(const COPHH *cophh, "key", U32 flags) =for hackers Found in file cop.h =item cophh_delete_sv X<cophh_delete_sv> NOTE: this function is experimental and may change or be removed without notice. Like L</cophh_delete_pvn>, but takes a Perl scalar instead of a string/length pair. COPHH * cophh_delete_sv(const COPHH *cophh, SV *key, U32 hash, U32 flags) =for hackers Found in file cop.h =item cophh_fetch_pv X<cophh_fetch_pv> NOTE: this function is experimental and may change or be removed without notice. Like L</cophh_fetch_pvn>, but takes a nul-terminated string instead of a string/length pair. SV * cophh_fetch_pv(const COPHH *cophh, const char *key, U32 hash, U32 flags) =for hackers Found in file cop.h =item cophh_fetch_pvn X<cophh_fetch_pvn> NOTE: this function is experimental and may change or be removed without notice. Look up the entry in the cop hints hash C<cophh> with the key specified by C<keypv> and C<keylen>. If C<flags> has the C<COPHH_KEY_UTF8> bit set, the key octets are interpreted as UTF-8, otherwise they are interpreted as Latin-1. C<hash> is a precomputed hash of the key string, or zero if it has not been precomputed. Returns a mortal scalar copy of the value associated with the key, or C<&PL_sv_placeholder> if there is no value associated with the key. SV * cophh_fetch_pvn(const COPHH *cophh, const char *keypv, STRLEN keylen, U32 hash, U32 flags) =for hackers Found in file cop.h =item cophh_fetch_pvs X<cophh_fetch_pvs> NOTE: this function is experimental and may change or be removed without notice. Like L</cophh_fetch_pvn>, but takes a literal string instead of a string/length pair, and no precomputed hash. SV * cophh_fetch_pvs(const COPHH *cophh, "key", U32 flags) =for hackers Found in file cop.h =item cophh_fetch_sv X<cophh_fetch_sv> NOTE: this function is experimental and may change or be removed without notice. Like L</cophh_fetch_pvn>, but takes a Perl scalar instead of a string/length pair. SV * cophh_fetch_sv(const COPHH *cophh, SV *key, U32 hash, U32 flags) =for hackers Found in file cop.h =item cophh_free X<cophh_free> NOTE: this function is experimental and may change or be removed without notice. Discard the cop hints hash C<cophh>, freeing all resources associated with it. void cophh_free(COPHH *cophh) =for hackers Found in file cop.h =item cophh_new_empty X<cophh_new_empty> NOTE: this function is experimental and may change or be removed without notice. Generate and return a fresh cop hints hash containing no entries. COPHH * cophh_new_empty() =for hackers Found in file cop.h =item cophh_store_pv X<cophh_store_pv> NOTE: this function is experimental and may change or be removed without notice. Like L</cophh_store_pvn>, but takes a nul-terminated string instead of a string/length pair. COPHH * cophh_store_pv(const COPHH *cophh, const char *key, U32 hash, SV *value, U32 flags) =for hackers Found in file cop.h =item cophh_store_pvn X<cophh_store_pvn> NOTE: this function is experimental and may change or be removed without notice. Stores a value, associated with a key, in the cop hints hash C<cophh>, and returns the modified hash. The returned hash pointer is in general not the same as the hash pointer that was passed in. The input hash is consumed by the function, and the pointer to it must not be subsequently used. Use L</cophh_copy> if you need both hashes. The key is specified by C<keypv> and C<keylen>. If C<flags> has the C<COPHH_KEY_UTF8> bit set, the key octets are interpreted as UTF-8, otherwise they are interpreted as Latin-1. C<hash> is a precomputed hash of the key string, or zero if it has not been precomputed. C<value> is the scalar value to store for this key. C<value> is copied by this function, which thus does not take ownership of any reference to it, and later changes to the scalar will not be reflected in the value visible in the cop hints hash. Complex types of scalar will not be stored with referential integrity, but will be coerced to strings. COPHH * cophh_store_pvn(COPHH *cophh, const char *keypv, STRLEN keylen, U32 hash, SV *value, U32 flags) =for hackers Found in file cop.h =item cophh_store_pvs X<cophh_store_pvs> NOTE: this function is experimental and may change or be removed without notice. Like L</cophh_store_pvn>, but takes a literal string instead of a string/length pair, and no precomputed hash. COPHH * cophh_store_pvs(const COPHH *cophh, "key", SV *value, U32 flags) =for hackers Found in file cop.h =item cophh_store_sv X<cophh_store_sv> NOTE: this function is experimental and may change or be removed without notice. Like L</cophh_store_pvn>, but takes a Perl scalar instead of a string/length pair. COPHH * cophh_store_sv(const COPHH *cophh, SV *key, U32 hash, SV *value, U32 flags) =for hackers Found in file cop.h =back =head1 COP Hint Reading =over 8 =item cop_hints_2hv X<cop_hints_2hv> Generates and returns a standard Perl hash representing the full set of hint entries in the cop C<cop>. C<flags> is currently unused and must be zero. HV * cop_hints_2hv(const COP *cop, U32 flags) =for hackers Found in file cop.h =item cop_hints_fetch_pv X<cop_hints_fetch_pv> Like L</cop_hints_fetch_pvn>, but takes a nul-terminated string instead of a string/length pair. SV * cop_hints_fetch_pv(const COP *cop, const char *key, U32 hash, U32 flags) =for hackers Found in file cop.h =item cop_hints_fetch_pvn X<cop_hints_fetch_pvn> Look up the hint entry in the cop C<cop> with the key specified by C<keypv> and C<keylen>. If C<flags> has the C<COPHH_KEY_UTF8> bit set, the key octets are interpreted as UTF-8, otherwise they are interpreted as Latin-1. C<hash> is a precomputed hash of the key string, or zero if it has not been precomputed. Returns a mortal scalar copy of the value associated with the key, or C<&PL_sv_placeholder> if there is no value associated with the key. SV * cop_hints_fetch_pvn(const COP *cop, const char *keypv, STRLEN keylen, U32 hash, U32 flags) =for hackers Found in file cop.h =item cop_hints_fetch_pvs X<cop_hints_fetch_pvs> Like L</cop_hints_fetch_pvn>, but takes a literal string instead of a string/length pair, and no precomputed hash. SV * cop_hints_fetch_pvs(const COP *cop, "key", U32 flags) =for hackers Found in file cop.h =item cop_hints_fetch_sv X<cop_hints_fetch_sv> Like L</cop_hints_fetch_pvn>, but takes a Perl scalar instead of a string/length pair. SV * cop_hints_fetch_sv(const COP *cop, SV *key, U32 hash, U32 flags) =for hackers Found in file cop.h =item CopLABEL X<CopLABEL> Returns the label attached to a cop. const char * CopLABEL(COP *const cop) =for hackers Found in file cop.h =item CopLABEL_len X<CopLABEL_len> Returns the label attached to a cop, and stores its length in bytes into C<*len>. const char * CopLABEL_len(COP *const cop, STRLEN *len) =for hackers Found in file cop.h =item CopLABEL_len_flags X<CopLABEL_len_flags> Returns the label attached to a cop, and stores its length in bytes into C<*len>. Upon return, C<*flags> will be set to either C<SVf_UTF8> or 0. const char * CopLABEL_len_flags(COP *const cop, STRLEN *len, U32 *flags) =for hackers Found in file cop.h =back =head1 Custom Operators =over 8 =item custom_op_register X<custom_op_register> Register a custom op. See L<perlguts/"Custom Operators">. NOTE: this function must be explicitly called as Perl_custom_op_register with an aTHX_ parameter. void Perl_custom_op_register(pTHX_ Perl_ppaddr_t ppaddr, const XOP *xop) =for hackers Found in file op.c =item Perl_custom_op_xop X<Perl_custom_op_xop> Return the XOP structure for a given custom op. This macro should be considered internal to C<OP_NAME> and the other access macros: use them instead. This macro does call a function. Prior to 5.19.6, this was implemented as a function. const XOP * Perl_custom_op_xop(pTHX_ const OP *o) =for hackers Found in file op.c =item XopDISABLE X<XopDISABLE> Temporarily disable a member of the XOP, by clearing the appropriate flag. void XopDISABLE(XOP *xop, which) =for hackers Found in file op.h =item XopENABLE X<XopENABLE> Reenable a member of the XOP which has been disabled. void XopENABLE(XOP *xop, which) =for hackers Found in file op.h =item XopENTRY X<XopENTRY> Return a member of the XOP structure. C<which> is a cpp token indicating which entry to return. If the member is not set this will return a default value. The return type depends on C<which>. This macro evaluates its arguments more than once. If you are using C<Perl_custom_op_xop> to retreive a C<XOP *> from a C<OP *>, use the more efficient L</XopENTRYCUSTOM> instead. XopENTRY(XOP *xop, which) =for hackers Found in file op.h =item XopENTRYCUSTOM X<XopENTRYCUSTOM> Exactly like C<XopENTRY(XopENTRY(Perl_custom_op_xop(aTHX_ o), which)> but more efficient. The C<which> parameter is identical to L</XopENTRY>. XopENTRYCUSTOM(const OP *o, which) =for hackers Found in file op.h =item XopENTRY_set X<XopENTRY_set> Set a member of the XOP structure. C<which> is a cpp token indicating which entry to set. See L<perlguts/"Custom Operators"> for details about the available members and how they are used. This macro evaluates its argument more than once. void XopENTRY_set(XOP *xop, which, value) =for hackers Found in file op.h =item XopFLAGS X<XopFLAGS> Return the XOP's flags. U32 XopFLAGS(XOP *xop) =for hackers Found in file op.h =back =head1 CV Manipulation Functions This section documents functions to manipulate CVs which are code-values, or subroutines. For more information, see L<perlguts>. =over 8 =item caller_cx X<caller_cx> The XSUB-writer's equivalent of L<caller()|perlfunc/caller>. The returned C<PERL_CONTEXT> structure can be interrogated to find all the information returned to Perl by C<caller>. Note that XSUBs don't get a stack frame, so C<caller_cx(0, NULL)> will return information for the immediately-surrounding Perl code. This function skips over the automatic calls to C<&DB::sub> made on the behalf of the debugger. If the stack frame requested was a sub called by C<DB::sub>, the return value will be the frame for the call to C<DB::sub>, since that has the correct line number/etc. for the call site. If I<dbcxp> is non-C<NULL>, it will be set to a pointer to the frame for the sub call itself. const PERL_CONTEXT * caller_cx( I32 level, const PERL_CONTEXT **dbcxp ) =for hackers Found in file pp_ctl.c =item CvSTASH X<CvSTASH> Returns the stash of the CV. A stash is the symbol table hash, containing the package-scoped variables in the package where the subroutine was defined. For more information, see L<perlguts>. This also has a special use with XS AUTOLOAD subs. See L<perlguts/Autoloading with XSUBs>. HV* CvSTASH(CV* cv) =for hackers Found in file cv.h =item find_runcv X<find_runcv> Locate the CV corresponding to the currently executing sub or eval. If C<db_seqp> is non_null, skip CVs that are in the DB package and populate C<*db_seqp> with the cop sequence number at the point that the DB:: code was entered. (This allows debuggers to eval in the scope of the breakpoint rather than in the scope of the debugger itself.) CV* find_runcv(U32 *db_seqp) =for hackers Found in file pp_ctl.c =item get_cv X<get_cv> Uses C<strlen> to get the length of C<name>, then calls C<get_cvn_flags>. NOTE: the perl_ form of this function is deprecated. CV* get_cv(const char* name, I32 flags) =for hackers Found in file perl.c =item get_cvn_flags X<get_cvn_flags> Returns the CV of the specified Perl subroutine. C<flags> are passed to C<gv_fetchpvn_flags>. If C<GV_ADD> is set and the Perl subroutine does not exist then it will be declared (which has the same effect as saying C<sub name;>). If C<GV_ADD> is not set and the subroutine does not exist then NULL is returned. CV* get_cvn_flags(const char* name, STRLEN len, I32 flags) =for hackers Found in file perl.c =back =head1 C<xsubpp> variables and internal functions =over 8 =item ax X<ax> Variable which is setup by C<xsubpp> to indicate the stack base offset, used by the C<ST>, C<XSprePUSH> and C<XSRETURN> macros. The C<dMARK> macro must be called prior to setup the C<MARK> variable. I32 ax =for hackers Found in file XSUB.h =item CLASS X<CLASS> Variable which is setup by C<xsubpp> to indicate the class name for a C++ XS constructor. This is always a C<char*>. See C<L</THIS>>. char* CLASS =for hackers Found in file XSUB.h =item dAX X<dAX> Sets up the C<ax> variable. This is usually handled automatically by C<xsubpp> by calling C<dXSARGS>. dAX; =for hackers Found in file XSUB.h =item dAXMARK X<dAXMARK> Sets up the C<ax> variable and stack marker variable C<mark>. This is usually handled automatically by C<xsubpp> by calling C<dXSARGS>. dAXMARK; =for hackers Found in file XSUB.h =item dITEMS X<dITEMS> Sets up the C<items> variable. This is usually handled automatically by C<xsubpp> by calling C<dXSARGS>. dITEMS; =for hackers Found in file XSUB.h =item dUNDERBAR X<dUNDERBAR> Sets up any variable needed by the C<UNDERBAR> macro. It used to define C<padoff_du>, but it is currently a noop. However, it is strongly advised to still use it for ensuring past and future compatibility. dUNDERBAR; =for hackers Found in file XSUB.h =item dXSARGS X<dXSARGS> Sets up stack and mark pointers for an XSUB, calling C<dSP> and C<dMARK>. Sets up the C<ax> and C<items> variables by calling C<dAX> and C<dITEMS>. This is usually handled automatically by C<xsubpp>. dXSARGS; =for hackers Found in file XSUB.h =item dXSI32 X<dXSI32> Sets up the C<ix> variable for an XSUB which has aliases. This is usually handled automatically by C<xsubpp>. dXSI32; =for hackers Found in file XSUB.h =item items X<items> Variable which is setup by C<xsubpp> to indicate the number of items on the stack. See L<perlxs/"Variable-length Parameter Lists">. I32 items =for hackers Found in file XSUB.h =item ix X<ix> Variable which is setup by C<xsubpp> to indicate which of an XSUB's aliases was used to invoke it. See L<perlxs/"The ALIAS: Keyword">. I32 ix =for hackers Found in file XSUB.h =item RETVAL X<RETVAL> Variable which is setup by C<xsubpp> to hold the return value for an XSUB. This is always the proper type for the XSUB. See L<perlxs/"The RETVAL Variable">. (whatever) RETVAL =for hackers Found in file XSUB.h =item ST X<ST> Used to access elements on the XSUB's stack. SV* ST(int ix) =for hackers Found in file XSUB.h =item THIS X<THIS> Variable which is setup by C<xsubpp> to designate the object in a C++ XSUB. This is always the proper type for the C++ object. See C<L</CLASS>> and L<perlxs/"Using XS With C++">. (whatever) THIS =for hackers Found in file XSUB.h =item UNDERBAR X<UNDERBAR> The SV* corresponding to the C<$_> variable. Works even if there is a lexical C<$_> in scope. =for hackers Found in file XSUB.h =item XS X<XS> Macro to declare an XSUB and its C parameter list. This is handled by C<xsubpp>. It is the same as using the more explicit C<XS_EXTERNAL> macro. =for hackers Found in file XSUB.h =item XS_EXTERNAL X<XS_EXTERNAL> Macro to declare an XSUB and its C parameter list explicitly exporting the symbols. =for hackers Found in file XSUB.h =item XS_INTERNAL X<XS_INTERNAL> Macro to declare an XSUB and its C parameter list without exporting the symbols. This is handled by C<xsubpp> and generally preferable over exporting the XSUB symbols unnecessarily. =for hackers Found in file XSUB.h =back =head1 Debugging Utilities =over 8 =item dump_all X<dump_all> Dumps the entire optree of the current program starting at C<PL_main_root> to C<STDERR>. Also dumps the optrees for all visible subroutines in C<PL_defstash>. void dump_all() =for hackers Found in file dump.c =item dump_packsubs X<dump_packsubs> Dumps the optrees for all visible subroutines in C<stash>. void dump_packsubs(const HV* stash) =for hackers Found in file dump.c =item op_class X<op_class> Given an op, determine what type of struct it has been allocated as. Returns one of the OPclass enums, such as OPclass_LISTOP. OPclass op_class(const OP *o) =for hackers Found in file dump.c =item op_dump X<op_dump> Dumps the optree starting at OP C<o> to C<STDERR>. void op_dump(const OP *o) =for hackers Found in file dump.c =item sv_dump X<sv_dump> Dumps the contents of an SV to the C<STDERR> filehandle. For an example of its output, see L<Devel::Peek>. void sv_dump(SV* sv) =for hackers Found in file dump.c =back =head1 Display and Dump functions =over 8 =item pv_display X<pv_display> Similar to pv_escape(dsv,pv,cur,pvlim,PERL_PV_ESCAPE_QUOTE); except that an additional "\0" will be appended to the string when len > cur and pv[cur] is "\0". Note that the final string may be up to 7 chars longer than pvlim. char* pv_display(SV *dsv, const char *pv, STRLEN cur, STRLEN len, STRLEN pvlim) =for hackers Found in file dump.c =item pv_escape X<pv_escape> Escapes at most the first C<count> chars of C<pv> and puts the results into C<dsv> such that the size of the escaped string will not exceed C<max> chars and will not contain any incomplete escape sequences. The number of bytes escaped will be returned in the C<STRLEN *escaped> parameter if it is not null. When the C<dsv> parameter is null no escaping actually occurs, but the number of bytes that would be escaped were it not null will be calculated. If flags contains C<PERL_PV_ESCAPE_QUOTE> then any double quotes in the string will also be escaped. Normally the SV will be cleared before the escaped string is prepared, but when C<PERL_PV_ESCAPE_NOCLEAR> is set this will not occur. If C<PERL_PV_ESCAPE_UNI> is set then the input string is treated as UTF-8 if C<PERL_PV_ESCAPE_UNI_DETECT> is set then the input string is scanned using C<is_utf8_string()> to determine if it is UTF-8. If C<PERL_PV_ESCAPE_ALL> is set then all input chars will be output using C<\x01F1> style escapes, otherwise if C<PERL_PV_ESCAPE_NONASCII> is set, only non-ASCII chars will be escaped using this style; otherwise, only chars above 255 will be so escaped; other non printable chars will use octal or common escaped patterns like C<\n>. Otherwise, if C<PERL_PV_ESCAPE_NOBACKSLASH> then all chars below 255 will be treated as printable and will be output as literals. If C<PERL_PV_ESCAPE_FIRSTCHAR> is set then only the first char of the string will be escaped, regardless of max. If the output is to be in hex, then it will be returned as a plain hex sequence. Thus the output will either be a single char, an octal escape sequence, a special escape like C<\n> or a hex value. If C<PERL_PV_ESCAPE_RE> is set then the escape char used will be a C<"%"> and not a C<"\\">. This is because regexes very often contain backslashed sequences, whereas C<"%"> is not a particularly common character in patterns. Returns a pointer to the escaped text as held by C<dsv>. char* pv_escape(SV *dsv, char const * const str, const STRLEN count, const STRLEN max, STRLEN * const escaped, const U32 flags) =for hackers Found in file dump.c =item pv_pretty X<pv_pretty> Converts a string into something presentable, handling escaping via C<pv_escape()> and supporting quoting and ellipses. If the C<PERL_PV_PRETTY_QUOTE> flag is set then the result will be double quoted with any double quotes in the string escaped. Otherwise if the C<PERL_PV_PRETTY_LTGT> flag is set then the result be wrapped in angle brackets. If the C<PERL_PV_PRETTY_ELLIPSES> flag is set and not all characters in string were output then an ellipsis C<...> will be appended to the string. Note that this happens AFTER it has been quoted. If C<start_color> is non-null then it will be inserted after the opening quote (if there is one) but before the escaped text. If C<end_color> is non-null then it will be inserted after the escaped text but before any quotes or ellipses. Returns a pointer to the prettified text as held by C<dsv>. char* pv_pretty(SV *dsv, char const * const str, const STRLEN count, const STRLEN max, char const * const start_color, char const * const end_color, const U32 flags) =for hackers Found in file dump.c =back =head1 Embedding Functions =over 8 =item cv_clone X<cv_clone> Clone a CV, making a lexical closure. C<proto> supplies the prototype of the function: its code, pad structure, and other attributes. The prototype is combined with a capture of outer lexicals to which the code refers, which are taken from the currently-executing instance of the immediately surrounding code. CV* cv_clone(CV* proto) =for hackers Found in file pad.c =item cv_name X<cv_name> Returns an SV containing the name of the CV, mainly for use in error reporting. The CV may actually be a GV instead, in which case the returned SV holds the GV's name. Anything other than a GV or CV is treated as a string already holding the sub name, but this could change in the future. An SV may be passed as a second argument. If so, the name will be assigned to it and it will be returned. Otherwise the returned SV will be a new mortal. If C<flags> has the C<CV_NAME_NOTQUAL> bit set, then the package name will not be included. If the first argument is neither a CV nor a GV, this flag is ignored (subject to change). SV * cv_name(CV *cv, SV *sv, U32 flags) =for hackers Found in file pad.c =item cv_undef X<cv_undef> Clear out all the active components of a CV. This can happen either by an explicit C<undef &foo>, or by the reference count going to zero. In the former case, we keep the C<CvOUTSIDE> pointer, so that any anonymous children can still follow the full lexical scope chain. void cv_undef(CV* cv) =for hackers Found in file pad.c =item find_rundefsv X<find_rundefsv> Returns the global variable C<$_>. SV* find_rundefsv() =for hackers Found in file pad.c =item find_rundefsvoffset X<find_rundefsvoffset> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. Until the lexical C<$_> feature was removed, this function would find the position of the lexical C<$_> in the pad of the currently-executing function and return the offset in the current pad, or C<NOT_IN_PAD>. Now it always returns C<NOT_IN_PAD>. PADOFFSET find_rundefsvoffset() =for hackers Found in file pad.c =item intro_my X<intro_my> "Introduce" C<my> variables to visible status. This is called during parsing at the end of each statement to make lexical variables visible to subsequent statements. U32 intro_my() =for hackers Found in file pad.c =item load_module X<load_module> Loads the module whose name is pointed to by the string part of C<name>. Note that the actual module name, not its filename, should be given. Eg, "Foo::Bar" instead of "Foo/Bar.pm". ver, if specified and not NULL, provides version semantics similar to C<use Foo::Bar VERSION>. The optional trailing arguments can be used to specify arguments to the module's C<import()> method, similar to C<use Foo::Bar VERSION LIST>; their precise handling depends on the flags. The flags argument is a bitwise-ORed collection of any of C<PERL_LOADMOD_DENY>, C<PERL_LOADMOD_NOIMPORT>, or C<PERL_LOADMOD_IMPORT_OPS> (or 0 for no flags). If C<PERL_LOADMOD_NOIMPORT> is set, the module is loaded as if with an empty import list, as in C<use Foo::Bar ()>; this is the only circumstance in which the trailing optional arguments may be omitted entirely. Otherwise, if C<PERL_LOADMOD_IMPORT_OPS> is set, the trailing arguments must consist of exactly one C<OP*>, containing the op tree that produces the relevant import arguments. Otherwise, the trailing arguments must all be C<SV*> values that will be used as import arguments; and the list must be terminated with C<(SV*) NULL>. If neither C<PERL_LOADMOD_NOIMPORT> nor C<PERL_LOADMOD_IMPORT_OPS> is set, the trailing C<NULL> pointer is needed even if no import arguments are desired. The reference count for each specified C<SV*> argument is decremented. In addition, the C<name> argument is modified. If C<PERL_LOADMOD_DENY> is set, the module is loaded as if with C<no> rather than C<use>. void load_module(U32 flags, SV* name, SV* ver, ...) =for hackers Found in file op.c =item my_exit X<my_exit> A wrapper for the C library L<exit(3)>, honoring what L<perlapi/PL_exit_flags> say to do. void my_exit(U32 status) =for hackers Found in file perl.c =item newPADNAMELIST X<newPADNAMELIST> NOTE: this function is experimental and may change or be removed without notice. Creates a new pad name list. C<max> is the highest index for which space is allocated. PADNAMELIST * newPADNAMELIST(size_t max) =for hackers Found in file pad.c =item newPADNAMEouter X<newPADNAMEouter> NOTE: this function is experimental and may change or be removed without notice. Constructs and returns a new pad name. Only use this function for names that refer to outer lexicals. (See also L</newPADNAMEpvn>.) C<outer> is the outer pad name that this one mirrors. The returned pad name has the C<PADNAMEt_OUTER> flag already set. PADNAME * newPADNAMEouter(PADNAME *outer) =for hackers Found in file pad.c =item newPADNAMEpvn X<newPADNAMEpvn> NOTE: this function is experimental and may change or be removed without notice. Constructs and returns a new pad name. C<s> must be a UTF-8 string. Do not use this for pad names that point to outer lexicals. See C<L</newPADNAMEouter>>. PADNAME * newPADNAMEpvn(const char *s, STRLEN len) =for hackers Found in file pad.c =item nothreadhook X<nothreadhook> Stub that provides thread hook for perl_destruct when there are no threads. int nothreadhook() =for hackers Found in file perl.c =item pad_add_anon X<pad_add_anon> Allocates a place in the currently-compiling pad (via L</pad_alloc>) for an anonymous function that is lexically scoped inside the currently-compiling function. The function C<func> is linked into the pad, and its C<CvOUTSIDE> link to the outer scope is weakened to avoid a reference loop. One reference count is stolen, so you may need to do C<SvREFCNT_inc(func)>. C<optype> should be an opcode indicating the type of operation that the pad entry is to support. This doesn't affect operational semantics, but is used for debugging. PADOFFSET pad_add_anon(CV* func, I32 optype) =for hackers Found in file pad.c =item pad_add_name_pv X<pad_add_name_pv> Exactly like L</pad_add_name_pvn>, but takes a nul-terminated string instead of a string/length pair. PADOFFSET pad_add_name_pv(const char *name, const U32 flags, HV *typestash, HV *ourstash) =for hackers Found in file pad.c =item pad_add_name_pvn X<pad_add_name_pvn> Allocates a place in the currently-compiling pad for a named lexical variable. Stores the name and other metadata in the name part of the pad, and makes preparations to manage the variable's lexical scoping. Returns the offset of the allocated pad slot. C<namepv>/C<namelen> specify the variable's name, including leading sigil. If C<typestash> is non-null, the name is for a typed lexical, and this identifies the type. If C<ourstash> is non-null, it's a lexical reference to a package variable, and this identifies the package. The following flags can be OR'ed together: padadd_OUR redundantly specifies if it's a package var padadd_STATE variable will retain value persistently padadd_NO_DUP_CHECK skip check for lexical shadowing PADOFFSET pad_add_name_pvn(const char *namepv, STRLEN namelen, U32 flags, HV *typestash, HV *ourstash) =for hackers Found in file pad.c =item pad_add_name_sv X<pad_add_name_sv> Exactly like L</pad_add_name_pvn>, but takes the name string in the form of an SV instead of a string/length pair. PADOFFSET pad_add_name_sv(SV *name, U32 flags, HV *typestash, HV *ourstash) =for hackers Found in file pad.c =item pad_alloc X<pad_alloc> NOTE: this function is experimental and may change or be removed without notice. Allocates a place in the currently-compiling pad, returning the offset of the allocated pad slot. No name is initially attached to the pad slot. C<tmptype> is a set of flags indicating the kind of pad entry required, which will be set in the value SV for the allocated pad entry: SVs_PADMY named lexical variable ("my", "our", "state") SVs_PADTMP unnamed temporary store SVf_READONLY constant shared between recursion levels C<SVf_READONLY> has been supported here only since perl 5.20. To work with earlier versions as well, use C<SVf_READONLY|SVs_PADTMP>. C<SVf_READONLY> does not cause the SV in the pad slot to be marked read-only, but simply tells C<pad_alloc> that it I<will> be made read-only (by the caller), or at least should be treated as such. C<optype> should be an opcode indicating the type of operation that the pad entry is to support. This doesn't affect operational semantics, but is used for debugging. PADOFFSET pad_alloc(I32 optype, U32 tmptype) =for hackers Found in file pad.c =item pad_findmy_pv X<pad_findmy_pv> Exactly like L</pad_findmy_pvn>, but takes a nul-terminated string instead of a string/length pair. PADOFFSET pad_findmy_pv(const char* name, U32 flags) =for hackers Found in file pad.c =item pad_findmy_pvn X<pad_findmy_pvn> Given the name of a lexical variable, find its position in the currently-compiling pad. C<namepv>/C<namelen> specify the variable's name, including leading sigil. C<flags> is reserved and must be zero. If it is not in the current pad but appears in the pad of any lexically enclosing scope, then a pseudo-entry for it is added in the current pad. Returns the offset in the current pad, or C<NOT_IN_PAD> if no such lexical is in scope. PADOFFSET pad_findmy_pvn(const char* namepv, STRLEN namelen, U32 flags) =for hackers Found in file pad.c =item pad_findmy_sv X<pad_findmy_sv> Exactly like L</pad_findmy_pvn>, but takes the name string in the form of an SV instead of a string/length pair. PADOFFSET pad_findmy_sv(SV* name, U32 flags) =for hackers Found in file pad.c =item padnamelist_fetch X<padnamelist_fetch> NOTE: this function is experimental and may change or be removed without notice. Fetches the pad name from the given index. PADNAME * padnamelist_fetch(PADNAMELIST *pnl, SSize_t key) =for hackers Found in file pad.c =item padnamelist_store X<padnamelist_store> NOTE: this function is experimental and may change or be removed without notice. Stores the pad name (which may be null) at the given index, freeing any existing pad name in that slot. PADNAME ** padnamelist_store(PADNAMELIST *pnl, SSize_t key, PADNAME *val) =for hackers Found in file pad.c =item pad_setsv X<pad_setsv> Set the value at offset C<po> in the current (compiling or executing) pad. Use the macro C<PAD_SETSV()> rather than calling this function directly. void pad_setsv(PADOFFSET po, SV* sv) =for hackers Found in file pad.c =item pad_sv X<pad_sv> Get the value at offset C<po> in the current (compiling or executing) pad. Use macro C<PAD_SV> instead of calling this function directly. SV* pad_sv(PADOFFSET po) =for hackers Found in file pad.c =item pad_tidy X<pad_tidy> NOTE: this function is experimental and may change or be removed without notice. Tidy up a pad at the end of compilation of the code to which it belongs. Jobs performed here are: remove most stuff from the pads of anonsub prototypes; give it a C<@_>; mark temporaries as such. C<type> indicates the kind of subroutine: padtidy_SUB ordinary subroutine padtidy_SUBCLONE prototype for lexical closure padtidy_FORMAT format void pad_tidy(padtidy_type type) =for hackers Found in file pad.c =item perl_alloc X<perl_alloc> Allocates a new Perl interpreter. See L<perlembed>. PerlInterpreter* perl_alloc() =for hackers Found in file perl.c =item perl_construct X<perl_construct> Initializes a new Perl interpreter. See L<perlembed>. void perl_construct(PerlInterpreter *my_perl) =for hackers Found in file perl.c =item perl_destruct X<perl_destruct> Shuts down a Perl interpreter. See L<perlembed> for a tutorial. C<my_perl> points to the Perl interpreter. It must have been previously created through the use of L</perl_alloc> and L</perl_construct>. It may have been initialised through L</perl_parse>, and may have been used through L</perl_run> and other means. This function should be called for any Perl interpreter that has been constructed with L</perl_construct>, even if subsequent operations on it failed, for example if L</perl_parse> returned a non-zero value. If the interpreter's C<PL_exit_flags> word has the C<PERL_EXIT_DESTRUCT_END> flag set, then this function will execute code in C<END> blocks before performing the rest of destruction. If it is desired to make any use of the interpreter between L</perl_parse> and L</perl_destruct> other than just calling L</perl_run>, then this flag should be set early on. This matters if L</perl_run> will not be called, or if anything else will be done in addition to calling L</perl_run>. Returns a value be a suitable value to pass to the C library function C<exit> (or to return from C<main>), to serve as an exit code indicating the nature of the way the interpreter terminated. This takes into account any failure of L</perl_parse> and any early exit from L</perl_run>. The exit code is of the type required by the host operating system, so because of differing exit code conventions it is not portable to interpret specific numeric values as having specific meanings. int perl_destruct(PerlInterpreter *my_perl) =for hackers Found in file perl.c =item perl_free X<perl_free> Releases a Perl interpreter. See L<perlembed>. void perl_free(PerlInterpreter *my_perl) =for hackers Found in file perl.c =item perl_parse X<perl_parse> Tells a Perl interpreter to parse a Perl script. This performs most of the initialisation of a Perl interpreter. See L<perlembed> for a tutorial. C<my_perl> points to the Perl interpreter that is to parse the script. It must have been previously created through the use of L</perl_alloc> and L</perl_construct>. C<xsinit> points to a callback function that will be called to set up the ability for this Perl interpreter to load XS extensions, or may be null to perform no such setup. C<argc> and C<argv> supply a set of command-line arguments to the Perl interpreter, as would normally be passed to the C<main> function of a C program. C<argv[argc]> must be null. These arguments are where the script to parse is specified, either by naming a script file or by providing a script in a C<-e> option. If L<C<$0>|perlvar/$0> will be written to in the Perl interpreter, then the argument strings must be in writable memory, and so mustn't just be string constants. C<env> specifies a set of environment variables that will be used by this Perl interpreter. If non-null, it must point to a null-terminated array of environment strings. If null, the Perl interpreter will use the environment supplied by the C<environ> global variable. This function initialises the interpreter, and parses and compiles the script specified by the command-line arguments. This includes executing code in C<BEGIN>, C<UNITCHECK>, and C<CHECK> blocks. It does not execute C<INIT> blocks or the main program. Returns an integer of slightly tricky interpretation. The correct use of the return value is as a truth value indicating whether there was a failure in initialisation. If zero is returned, this indicates that initialisation was successful, and it is safe to proceed to call L</perl_run> and make other use of it. If a non-zero value is returned, this indicates some problem that means the interpreter wants to terminate. The interpreter should not be just abandoned upon such failure; the caller should proceed to shut the interpreter down cleanly with L</perl_destruct> and free it with L</perl_free>. For historical reasons, the non-zero return value also attempts to be a suitable value to pass to the C library function C<exit> (or to return from C<main>), to serve as an exit code indicating the nature of the way initialisation terminated. However, this isn't portable, due to differing exit code conventions. A historical bug is preserved for the time being: if the Perl built-in C<exit> is called during this function's execution, with a type of exit entailing a zero exit code under the host operating system's conventions, then this function returns zero rather than a non-zero value. This bug, [perl #2754], leads to C<perl_run> being called (and therefore C<INIT> blocks and the main program running) despite a call to C<exit>. It has been preserved because a popular module-installing module has come to rely on it and needs time to be fixed. This issue is [perl #132577], and the original bug is due to be fixed in Perl 5.30. int perl_parse(PerlInterpreter *my_perl, XSINIT_t xsinit, int argc, char** argv, char** env) =for hackers Found in file perl.c =item perl_run X<perl_run> Tells a Perl interpreter to run its main program. See L<perlembed> for a tutorial. C<my_perl> points to the Perl interpreter. It must have been previously created through the use of L</perl_alloc> and L</perl_construct>, and initialised through L</perl_parse>. This function should not be called if L</perl_parse> returned a non-zero value, indicating a failure in initialisation or compilation. This function executes code in C<INIT> blocks, and then executes the main program. The code to be executed is that established by the prior call to L</perl_parse>. If the interpreter's C<PL_exit_flags> word does not have the C<PERL_EXIT_DESTRUCT_END> flag set, then this function will also execute code in C<END> blocks. If it is desired to make any further use of the interpreter after calling this function, then C<END> blocks should be postponed to L</perl_destruct> time by setting that flag. Returns an integer of slightly tricky interpretation. The correct use of the return value is as a truth value indicating whether the program terminated non-locally. If zero is returned, this indicates that the program ran to completion, and it is safe to make other use of the interpreter (provided that the C<PERL_EXIT_DESTRUCT_END> flag was set as described above). If a non-zero value is returned, this indicates that the interpreter wants to terminate early. The interpreter should not be just abandoned because of this desire to terminate; the caller should proceed to shut the interpreter down cleanly with L</perl_destruct> and free it with L</perl_free>. For historical reasons, the non-zero return value also attempts to be a suitable value to pass to the C library function C<exit> (or to return from C<main>), to serve as an exit code indicating the nature of the way the program terminated. However, this isn't portable, due to differing exit code conventions. An attempt is made to return an exit code of the type required by the host operating system, but because it is constrained to be non-zero, it is not necessarily possible to indicate every type of exit. It is only reliable on Unix, where a zero exit code can be augmented with a set bit that will be ignored. In any case, this function is not the correct place to acquire an exit code: one should get that from L</perl_destruct>. int perl_run(PerlInterpreter *my_perl) =for hackers Found in file perl.c =item require_pv X<require_pv> Tells Perl to C<require> the file named by the string argument. It is analogous to the Perl code C<eval "require '$file'">. It's even implemented that way; consider using load_module instead. NOTE: the perl_ form of this function is deprecated. void require_pv(const char* pv) =for hackers Found in file perl.c =back =head1 Exception Handling (simple) Macros =over 8 =item dXCPT X<dXCPT> Set up necessary local variables for exception handling. See L<perlguts/"Exception Handling">. dXCPT; =for hackers Found in file XSUB.h =item XCPT_CATCH X<XCPT_CATCH> Introduces a catch block. See L<perlguts/"Exception Handling">. =for hackers Found in file XSUB.h =item XCPT_RETHROW X<XCPT_RETHROW> Rethrows a previously caught exception. See L<perlguts/"Exception Handling">. XCPT_RETHROW; =for hackers Found in file XSUB.h =item XCPT_TRY_END X<XCPT_TRY_END> Ends a try block. See L<perlguts/"Exception Handling">. =for hackers Found in file XSUB.h =item XCPT_TRY_START X<XCPT_TRY_START> Starts a try block. See L<perlguts/"Exception Handling">. =for hackers Found in file XSUB.h =back =head1 Functions in file inline.h =over 8 =item av_count X<av_count> Returns the number of elements in the array C<av>. This is the true length of the array, including any undefined elements. It is always the same as S<C<av_top_index(av) + 1>>. Size_t av_count(AV *av) =for hackers Found in file inline.h =back =head1 Functions in file vutil.c =over 8 =item new_version X<new_version> Returns a new version object based on the passed in SV: SV *sv = new_version(SV *ver); Does not alter the passed in ver SV. See "upg_version" if you want to upgrade the SV. SV* new_version(SV *ver) =for hackers Found in file vutil.c =item prescan_version X<prescan_version> Validate that a given string can be parsed as a version object, but doesn't actually perform the parsing. Can use either strict or lax validation rules. Can optionally set a number of hint variables to save the parsing code some time when tokenizing. const char* prescan_version(const char *s, bool strict, const char** errstr, bool *sqv, int *ssaw_decimal, int *swidth, bool *salpha) =for hackers Found in file vutil.c =item scan_version X<scan_version> Returns a pointer to the next character after the parsed version string, as well as upgrading the passed in SV to an RV. Function must be called with an already existing SV like sv = newSV(0); s = scan_version(s, SV *sv, bool qv); Performs some preprocessing to the string to ensure that it has the correct characteristics of a version. Flags the object if it contains an underscore (which denotes this is an alpha version). The boolean qv denotes that the version should be interpreted as if it had multiple decimals, even if it doesn't. const char* scan_version(const char *s, SV *rv, bool qv) =for hackers Found in file vutil.c =item upg_version X<upg_version> In-place upgrade of the supplied SV to a version object. SV *sv = upg_version(SV *sv, bool qv); Returns a pointer to the upgraded SV. Set the boolean qv if you want to force this SV to be interpreted as an "extended" version. SV* upg_version(SV *ver, bool qv) =for hackers Found in file vutil.c =item vcmp X<vcmp> Version object aware cmp. Both operands must already have been converted into version objects. int vcmp(SV *lhv, SV *rhv) =for hackers Found in file vutil.c =item vnormal X<vnormal> Accepts a version object and returns the normalized string representation. Call like: sv = vnormal(rv); NOTE: you can pass either the object directly or the SV contained within the RV. The SV returned has a refcount of 1. SV* vnormal(SV *vs) =for hackers Found in file vutil.c =item vnumify X<vnumify> Accepts a version object and returns the normalized floating point representation. Call like: sv = vnumify(rv); NOTE: you can pass either the object directly or the SV contained within the RV. The SV returned has a refcount of 1. SV* vnumify(SV *vs) =for hackers Found in file vutil.c =item vstringify X<vstringify> In order to maintain maximum compatibility with earlier versions of Perl, this function will return either the floating point notation or the multiple dotted notation, depending on whether the original version contained 1 or more dots, respectively. The SV returned has a refcount of 1. SV* vstringify(SV *vs) =for hackers Found in file vutil.c =item vverify X<vverify> Validates that the SV contains valid internal structure for a version object. It may be passed either the version object (RV) or the hash itself (HV). If the structure is valid, it returns the HV. If the structure is invalid, it returns NULL. SV *hv = vverify(sv); Note that it only confirms the bare minimum structure (so as not to get confused by derived classes which may contain additional hash entries): =over 4 =item * The SV is an HV or a reference to an HV =item * The hash contains a "version" key =item * The "version" key has a reference to an AV as its value =back SV* vverify(SV *vs) =for hackers Found in file vutil.c =back =head1 "Gimme" Values =over 8 =item G_ARRAY X<G_ARRAY> Used to indicate list context. See C<L</GIMME_V>>, C<L</GIMME>> and L<perlcall>. =for hackers Found in file cop.h =item G_DISCARD X<G_DISCARD> Indicates that arguments returned from a callback should be discarded. See L<perlcall>. =for hackers Found in file cop.h =item G_EVAL X<G_EVAL> Used to force a Perl C<eval> wrapper around a callback. See L<perlcall>. =for hackers Found in file cop.h =item GIMME X<GIMME> A backward-compatible version of C<GIMME_V> which can only return C<G_SCALAR> or C<G_ARRAY>; in a void context, it returns C<G_SCALAR>. Deprecated. Use C<GIMME_V> instead. U32 GIMME =for hackers Found in file op.h =item GIMME_V X<GIMME_V> The XSUB-writer's equivalent to Perl's C<wantarray>. Returns C<G_VOID>, C<G_SCALAR> or C<G_ARRAY> for void, scalar or list context, respectively. See L<perlcall> for a usage example. U32 GIMME_V =for hackers Found in file op.h =item G_NOARGS X<G_NOARGS> Indicates that no arguments are being sent to a callback. See L<perlcall>. =for hackers Found in file cop.h =item G_SCALAR X<G_SCALAR> Used to indicate scalar context. See C<L</GIMME_V>>, C<L</GIMME>>, and L<perlcall>. =for hackers Found in file cop.h =item G_VOID X<G_VOID> Used to indicate void context. See C<L</GIMME_V>> and L<perlcall>. =for hackers Found in file cop.h =back =head1 Global Variables These variables are global to an entire process. They are shared between all interpreters and all threads in a process. Any variables not documented here may be changed or removed without notice, so don't use them! If you feel you really do need to use an unlisted variable, first send email to L<perl5-porters@perl.org|mailto:perl5-porters@perl.org>. It may be that someone there will point out a way to accomplish what you need without using an internal variable. But if not, you should get a go-ahead to document and then use the variable. =over 8 =item PL_check X<PL_check> Array, indexed by opcode, of functions that will be called for the "check" phase of optree building during compilation of Perl code. For most (but not all) types of op, once the op has been initially built and populated with child ops it will be filtered through the check function referenced by the appropriate element of this array. The new op is passed in as the sole argument to the check function, and the check function returns the completed op. The check function may (as the name suggests) check the op for validity and signal errors. It may also initialise or modify parts of the ops, or perform more radical surgery such as adding or removing child ops, or even throw the op away and return a different op in its place. This array of function pointers is a convenient place to hook into the compilation process. An XS module can put its own custom check function in place of any of the standard ones, to influence the compilation of a particular type of op. However, a custom check function must never fully replace a standard check function (or even a custom check function from another module). A module modifying checking must instead B<wrap> the preexisting check function. A custom check function must be selective about when to apply its custom behaviour. In the usual case where it decides not to do anything special with an op, it must chain the preexisting op function. Check functions are thus linked in a chain, with the core's base checker at the end. For thread safety, modules should not write directly to this array. Instead, use the function L</wrap_op_checker>. =for hackers Found in file perlvars.h =item PL_keyword_plugin X<PL_keyword_plugin> NOTE: this function is experimental and may change or be removed without notice. Function pointer, pointing at a function used to handle extended keywords. The function should be declared as int keyword_plugin_function(pTHX_ char *keyword_ptr, STRLEN keyword_len, OP **op_ptr) The function is called from the tokeniser, whenever a possible keyword is seen. C<keyword_ptr> points at the word in the parser's input buffer, and C<keyword_len> gives its length; it is not null-terminated. The function is expected to examine the word, and possibly other state such as L<%^H|perlvar/%^H>, to decide whether it wants to handle it as an extended keyword. If it does not, the function should return C<KEYWORD_PLUGIN_DECLINE>, and the normal parser process will continue. If the function wants to handle the keyword, it first must parse anything following the keyword that is part of the syntax introduced by the keyword. See L</Lexer interface> for details. When a keyword is being handled, the plugin function must build a tree of C<OP> structures, representing the code that was parsed. The root of the tree must be stored in C<*op_ptr>. The function then returns a constant indicating the syntactic role of the construct that it has parsed: C<KEYWORD_PLUGIN_STMT> if it is a complete statement, or C<KEYWORD_PLUGIN_EXPR> if it is an expression. Note that a statement construct cannot be used inside an expression (except via C<do BLOCK> and similar), and an expression is not a complete statement (it requires at least a terminating semicolon). When a keyword is handled, the plugin function may also have (compile-time) side effects. It may modify C<%^H>, define functions, and so on. Typically, if side effects are the main purpose of a handler, it does not wish to generate any ops to be included in the normal compilation. In this case it is still required to supply an op tree, but it suffices to generate a single null op. That's how the C<*PL_keyword_plugin> function needs to behave overall. Conventionally, however, one does not completely replace the existing handler function. Instead, take a copy of C<PL_keyword_plugin> before assigning your own function pointer to it. Your handler function should look for keywords that it is interested in and handle those. Where it is not interested, it should call the saved plugin function, passing on the arguments it received. Thus C<PL_keyword_plugin> actually points at a chain of handler functions, all of which have an opportunity to handle keywords, and only the last function in the chain (built into the Perl core) will normally return C<KEYWORD_PLUGIN_DECLINE>. For thread safety, modules should not set this variable directly. Instead, use the function L</wrap_keyword_plugin>. =for hackers Found in file perlvars.h =item PL_phase X<PL_phase> A value that indicates the current Perl interpreter's phase. Possible values include C<PERL_PHASE_CONSTRUCT>, C<PERL_PHASE_START>, C<PERL_PHASE_CHECK>, C<PERL_PHASE_INIT>, C<PERL_PHASE_RUN>, C<PERL_PHASE_END>, and C<PERL_PHASE_DESTRUCT>. For example, the following determines whether the interpreter is in global destruction: if (PL_phase == PERL_PHASE_DESTRUCT) { // we are in global destruction } C<PL_phase> was introduced in Perl 5.14; in prior perls you can use C<PL_dirty> (boolean) to determine whether the interpreter is in global destruction. (Use of C<PL_dirty> is discouraged since 5.14.) enum perl_phase PL_phase =for hackers Found in file perlvars.h =back =head1 GV Functions A GV is a structure which corresponds to to a Perl typeglob, ie *foo. It is a structure that holds a pointer to a scalar, an array, a hash etc, corresponding to $foo, @foo, %foo. GVs are usually found as values in stashes (symbol table hashes) where Perl stores its global variables. =over 8 =item GvAV X<GvAV> Return the AV from the GV. AV* GvAV(GV* gv) =for hackers Found in file gv.h =item gv_const_sv X<gv_const_sv> If C<gv> is a typeglob whose subroutine entry is a constant sub eligible for inlining, or C<gv> is a placeholder reference that would be promoted to such a typeglob, then returns the value returned by the sub. Otherwise, returns C<NULL>. SV* gv_const_sv(GV* gv) =for hackers Found in file gv.c =item GvCV X<GvCV> Return the CV from the GV. CV* GvCV(GV* gv) =for hackers Found in file gv.h =item gv_fetchmeth X<gv_fetchmeth> Like L</gv_fetchmeth_pvn>, but lacks a flags parameter. GV* gv_fetchmeth(HV* stash, const char* name, STRLEN len, I32 level) =for hackers Found in file gv.c =item gv_fetchmethod_autoload X<gv_fetchmethod_autoload> Returns the glob which contains the subroutine to call to invoke the method on the C<stash>. In fact in the presence of autoloading this may be the glob for "AUTOLOAD". In this case the corresponding variable C<$AUTOLOAD> is already setup. The third parameter of C<gv_fetchmethod_autoload> determines whether AUTOLOAD lookup is performed if the given method is not present: non-zero means yes, look for AUTOLOAD; zero means no, don't look for AUTOLOAD. Calling C<gv_fetchmethod> is equivalent to calling C<gv_fetchmethod_autoload> with a non-zero C<autoload> parameter. These functions grant C<"SUPER"> token as a prefix of the method name. Note that if you want to keep the returned glob for a long time, you need to check for it being "AUTOLOAD", since at the later time the call may load a different subroutine due to C<$AUTOLOAD> changing its value. Use the glob created as a side effect to do this. These functions have the same side-effects as C<gv_fetchmeth> with C<level==0>. The warning against passing the GV returned by C<gv_fetchmeth> to C<call_sv> applies equally to these functions. GV* gv_fetchmethod_autoload(HV* stash, const char* name, I32 autoload) =for hackers Found in file gv.c =item gv_fetchmeth_autoload X<gv_fetchmeth_autoload> This is the old form of L</gv_fetchmeth_pvn_autoload>, which has no flags parameter. GV* gv_fetchmeth_autoload(HV* stash, const char* name, STRLEN len, I32 level) =for hackers Found in file gv.c =item gv_fetchmeth_pv X<gv_fetchmeth_pv> Exactly like L</gv_fetchmeth_pvn>, but takes a nul-terminated string instead of a string/length pair. GV* gv_fetchmeth_pv(HV* stash, const char* name, I32 level, U32 flags) =for hackers Found in file gv.c =item gv_fetchmeth_pvn X<gv_fetchmeth_pvn> Returns the glob with the given C<name> and a defined subroutine or C<NULL>. The glob lives in the given C<stash>, or in the stashes accessible via C<@ISA> and C<UNIVERSAL::>. The argument C<level> should be either 0 or -1. If C<level==0>, as a side-effect creates a glob with the given C<name> in the given C<stash> which in the case of success contains an alias for the subroutine, and sets up caching info for this glob. The only significant values for C<flags> are C<GV_SUPER> and C<SVf_UTF8>. C<GV_SUPER> indicates that we want to look up the method in the superclasses of the C<stash>. The GV returned from C<gv_fetchmeth> may be a method cache entry, which is not visible to Perl code. So when calling C<call_sv>, you should not use the GV directly; instead, you should use the method's CV, which can be obtained from the GV with the C<GvCV> macro. GV* gv_fetchmeth_pvn(HV* stash, const char* name, STRLEN len, I32 level, U32 flags) =for hackers Found in file gv.c =item gv_fetchmeth_pvn_autoload X<gv_fetchmeth_pvn_autoload> Same as C<gv_fetchmeth_pvn()>, but looks for autoloaded subroutines too. Returns a glob for the subroutine. For an autoloaded subroutine without a GV, will create a GV even if C<level < 0>. For an autoloaded subroutine without a stub, C<GvCV()> of the result may be zero. Currently, the only significant value for C<flags> is C<SVf_UTF8>. GV* gv_fetchmeth_pvn_autoload(HV* stash, const char* name, STRLEN len, I32 level, U32 flags) =for hackers Found in file gv.c =item gv_fetchmeth_pv_autoload X<gv_fetchmeth_pv_autoload> Exactly like L</gv_fetchmeth_pvn_autoload>, but takes a nul-terminated string instead of a string/length pair. GV* gv_fetchmeth_pv_autoload(HV* stash, const char* name, I32 level, U32 flags) =for hackers Found in file gv.c =item gv_fetchmeth_sv X<gv_fetchmeth_sv> Exactly like L</gv_fetchmeth_pvn>, but takes the name string in the form of an SV instead of a string/length pair. GV* gv_fetchmeth_sv(HV* stash, SV* namesv, I32 level, U32 flags) =for hackers Found in file gv.c =item gv_fetchmeth_sv_autoload X<gv_fetchmeth_sv_autoload> Exactly like L</gv_fetchmeth_pvn_autoload>, but takes the name string in the form of an SV instead of a string/length pair. GV* gv_fetchmeth_sv_autoload(HV* stash, SV* namesv, I32 level, U32 flags) =for hackers Found in file gv.c =item GvHV X<GvHV> Return the HV from the GV. HV* GvHV(GV* gv) =for hackers Found in file gv.h =item gv_init X<gv_init> The old form of C<gv_init_pvn()>. It does not work with UTF-8 strings, as it has no flags parameter. If the C<multi> parameter is set, the C<GV_ADDMULTI> flag will be passed to C<gv_init_pvn()>. void gv_init(GV* gv, HV* stash, const char* name, STRLEN len, int multi) =for hackers Found in file gv.c =item gv_init_pv X<gv_init_pv> Same as C<gv_init_pvn()>, but takes a nul-terminated string for the name instead of separate char * and length parameters. void gv_init_pv(GV* gv, HV* stash, const char* name, U32 flags) =for hackers Found in file gv.c =item gv_init_pvn X<gv_init_pvn> Converts a scalar into a typeglob. This is an incoercible typeglob; assigning a reference to it will assign to one of its slots, instead of overwriting it as happens with typeglobs created by C<SvSetSV>. Converting any scalar that is C<SvOK()> may produce unpredictable results and is reserved for perl's internal use. C<gv> is the scalar to be converted. C<stash> is the parent stash/package, if any. C<name> and C<len> give the name. The name must be unqualified; that is, it must not include the package name. If C<gv> is a stash element, it is the caller's responsibility to ensure that the name passed to this function matches the name of the element. If it does not match, perl's internal bookkeeping will get out of sync. C<flags> can be set to C<SVf_UTF8> if C<name> is a UTF-8 string, or the return value of SvUTF8(sv). It can also take the C<GV_ADDMULTI> flag, which means to pretend that the GV has been seen before (i.e., suppress "Used once" warnings). void gv_init_pvn(GV* gv, HV* stash, const char* name, STRLEN len, U32 flags) =for hackers Found in file gv.c =item gv_init_sv X<gv_init_sv> Same as C<gv_init_pvn()>, but takes an SV * for the name instead of separate char * and length parameters. C<flags> is currently unused. void gv_init_sv(GV* gv, HV* stash, SV* namesv, U32 flags) =for hackers Found in file gv.c =item gv_stashpv X<gv_stashpv> Returns a pointer to the stash for a specified package. Uses C<strlen> to determine the length of C<name>, then calls C<gv_stashpvn()>. HV* gv_stashpv(const char* name, I32 flags) =for hackers Found in file gv.c =item gv_stashpvn X<gv_stashpvn> Returns a pointer to the stash for a specified package. The C<namelen> parameter indicates the length of the C<name>, in bytes. C<flags> is passed to C<gv_fetchpvn_flags()>, so if set to C<GV_ADD> then the package will be created if it does not already exist. If the package does not exist and C<flags> is 0 (or any other setting that does not create packages) then C<NULL> is returned. Flags may be one of: GV_ADD SVf_UTF8 GV_NOADD_NOINIT GV_NOINIT GV_NOEXPAND GV_ADDMG The most important of which are probably C<GV_ADD> and C<SVf_UTF8>. Note, use of C<gv_stashsv> instead of C<gv_stashpvn> where possible is strongly recommended for performance reasons. HV* gv_stashpvn(const char* name, U32 namelen, I32 flags) =for hackers Found in file gv.c =item gv_stashpvs X<gv_stashpvs> Like C<gv_stashpvn>, but takes a literal string instead of a string/length pair. HV* gv_stashpvs("name", I32 create) =for hackers Found in file handy.h =item gv_stashsv X<gv_stashsv> Returns a pointer to the stash for a specified package. See C<L</gv_stashpvn>>. Note this interface is strongly preferred over C<gv_stashpvn> for performance reasons. HV* gv_stashsv(SV* sv, I32 flags) =for hackers Found in file gv.c =item GvSV X<GvSV> Return the SV from the GV. SV* GvSV(GV* gv) =for hackers Found in file gv.h =item save_gp X<save_gp> Saves the current GP of gv on the save stack to be restored on scope exit. If empty is true, replace the GP with a new GP. If empty is false, mark gv with GVf_INTRO so the next reference assigned is localized, which is how C< local *foo = $someref; > works. void save_gp(GV* gv, I32 empty) =for hackers Found in file scope.c =item setdefout X<setdefout> Sets C<PL_defoutgv>, the default file handle for output, to the passed in typeglob. As C<PL_defoutgv> "owns" a reference on its typeglob, the reference count of the passed in typeglob is increased by one, and the reference count of the typeglob that C<PL_defoutgv> points to is decreased by one. void setdefout(GV* gv) =for hackers Found in file pp_sys.c =back =head1 Handy Values =over 8 =item C_ARRAY_END X<C_ARRAY_END> Returns a pointer to one element past the final element of the input C array. void * C_ARRAY_END(void *a) =for hackers Found in file handy.h =item C_ARRAY_LENGTH X<C_ARRAY_LENGTH> Returns the number of elements in the input C array (so you want your zero-based indices to be less than but not equal to). STRLEN C_ARRAY_LENGTH(void *a) =for hackers Found in file handy.h =item cBOOL X<cBOOL> Cast-to-bool. A simple S<C<(bool) I<expr>>> cast may not do the right thing: if C<bool> is defined as C<char>, for example, then the cast from C<int> is implementation-defined. C<(bool)!!(cbool)> in a ternary triggers a bug in xlc on AIX bool cBOOL(bool expr) =for hackers Found in file handy.h =item Nullav X<Nullav> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. Null AV pointer. (deprecated - use C<(AV *)NULL> instead) =for hackers Found in file av.h =item Nullch X<Nullch> Null character pointer. (No longer available when C<PERL_CORE> is defined.) =for hackers Found in file handy.h =item Nullcv X<Nullcv> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. Null CV pointer. (deprecated - use C<(CV *)NULL> instead) =for hackers Found in file cv.h =item Nullhv X<Nullhv> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. Null HV pointer. (deprecated - use C<(HV *)NULL> instead) =for hackers Found in file hv.h =item Nullsv X<Nullsv> Null SV pointer. (No longer available when C<PERL_CORE> is defined.) =for hackers Found in file handy.h =item STR_WITH_LEN X<STR_WITH_LEN> Returns two comma separated tokens of the input literal string, and its length. This is convenience macro which helps out in some API calls. Note that it can't be used as an argument to macros or functions that under some configurations might be macros, which means that it requires the full Perl_xxx(aTHX_ ...) form for any API calls where it's used. pair STR_WITH_LEN("literal string") =for hackers Found in file handy.h =item __ASSERT_ X<__ASSERT_> This is a helper macro to avoid preprocessor issues, replaced by nothing unless under DEBUGGING, where it expands to an assert of its argument, followed by a comma (hence the comma operator). If we just used a straight assert(), we would get a comma with nothing before it when not DEBUGGING. void __ASSERT_(bool expr) =for hackers Found in file handy.h =back =head1 Hash Manipulation Functions A HV structure represents a Perl hash. It consists mainly of an array of pointers, each of which points to a linked list of HE structures. The array is indexed by the hash function of the key, so each linked list represents all the hash entries with the same hash value. Each HE contains a pointer to the actual value, plus a pointer to a HEK structure which holds the key and hash value. =over 8 =item cop_fetch_label X<cop_fetch_label> NOTE: this function is experimental and may change or be removed without notice. Returns the label attached to a cop, and stores its length in bytes into C<*len>. Upon return, C<*flags> will be set to either C<SVf_UTF8> or 0. Alternatively, use the macro L</C<CopLABEL_len_flags>>; or if you don't need to know if the label is UTF-8 or not, the macro L</C<CopLABEL_len>>; or if you additionally dont need to know the length, L</C<CopLABEL>>. const char * cop_fetch_label(COP *const cop, STRLEN *len, U32 *flags) =for hackers Found in file hv.c =item cop_store_label X<cop_store_label> NOTE: this function is experimental and may change or be removed without notice. Save a label into a C<cop_hints_hash>. You need to set flags to C<SVf_UTF8> for a UTF-8 label. Any other flag is ignored. void cop_store_label(COP *const cop, const char *label, STRLEN len, U32 flags) =for hackers Found in file hv.c =item get_hv X<get_hv> Returns the HV of the specified Perl hash. C<flags> are passed to C<gv_fetchpv>. If C<GV_ADD> is set and the Perl variable does not exist then it will be created. If C<flags> is zero and the variable does not exist then C<NULL> is returned. NOTE: the perl_ form of this function is deprecated. HV* get_hv(const char *name, I32 flags) =for hackers Found in file perl.c =item HEf_SVKEY X<HEf_SVKEY> This flag, used in the length slot of hash entries and magic structures, specifies the structure contains an C<SV*> pointer where a C<char*> pointer is to be expected. (For information only--not to be used). =for hackers Found in file hv.h =item HeHASH X<HeHASH> Returns the computed hash stored in the hash entry. U32 HeHASH(HE* he) =for hackers Found in file hv.h =item HeKEY X<HeKEY> Returns the actual pointer stored in the key slot of the hash entry. The pointer may be either C<char*> or C<SV*>, depending on the value of C<HeKLEN()>. Can be assigned to. The C<HePV()> or C<HeSVKEY()> macros are usually preferable for finding the value of a key. void* HeKEY(HE* he) =for hackers Found in file hv.h =item HeKLEN X<HeKLEN> If this is negative, and amounts to C<HEf_SVKEY>, it indicates the entry holds an C<SV*> key. Otherwise, holds the actual length of the key. Can be assigned to. The C<HePV()> macro is usually preferable for finding key lengths. STRLEN HeKLEN(HE* he) =for hackers Found in file hv.h =item HePV X<HePV> Returns the key slot of the hash entry as a C<char*> value, doing any necessary dereferencing of possibly C<SV*> keys. The length of the string is placed in C<len> (this is a macro, so do I<not> use C<&len>). If you do not care about what the length of the key is, you may use the global variable C<PL_na>, though this is rather less efficient than using a local variable. Remember though, that hash keys in perl are free to contain embedded nulls, so using C<strlen()> or similar is not a good way to find the length of hash keys. This is very similar to the C<SvPV()> macro described elsewhere in this document. See also C<L</HeUTF8>>. If you are using C<HePV> to get values to pass to C<newSVpvn()> to create a new SV, you should consider using C<newSVhek(HeKEY_hek(he))> as it is more efficient. char* HePV(HE* he, STRLEN len) =for hackers Found in file hv.h =item HeSVKEY X<HeSVKEY> Returns the key as an C<SV*>, or C<NULL> if the hash entry does not contain an C<SV*> key. SV* HeSVKEY(HE* he) =for hackers Found in file hv.h =item HeSVKEY_force X<HeSVKEY_force> Returns the key as an C<SV*>. Will create and return a temporary mortal C<SV*> if the hash entry contains only a C<char*> key. SV* HeSVKEY_force(HE* he) =for hackers Found in file hv.h =item HeSVKEY_set X<HeSVKEY_set> Sets the key to a given C<SV*>, taking care to set the appropriate flags to indicate the presence of an C<SV*> key, and returns the same C<SV*>. SV* HeSVKEY_set(HE* he, SV* sv) =for hackers Found in file hv.h =item HeUTF8 X<HeUTF8> Returns whether the C<char *> value returned by C<HePV> is encoded in UTF-8, doing any necessary dereferencing of possibly C<SV*> keys. The value returned will be 0 or non-0, not necessarily 1 (or even a value with any low bits set), so B<do not> blindly assign this to a C<bool> variable, as C<bool> may be a typedef for C<char>. U32 HeUTF8(HE* he) =for hackers Found in file hv.h =item HeVAL X<HeVAL> Returns the value slot (type C<SV*>) stored in the hash entry. Can be assigned to. SV *foo= HeVAL(hv); HeVAL(hv)= sv; SV* HeVAL(HE* he) =for hackers Found in file hv.h =item hv_assert X<hv_assert> Check that a hash is in an internally consistent state. NOTE: this function must be explicitly called as Perl_hv_assert with an aTHX_ parameter. void Perl_hv_assert(pTHX_ HV *hv) =for hackers Found in file hv.c =item hv_bucket_ratio X<hv_bucket_ratio> NOTE: this function is experimental and may change or be removed without notice. If the hash is tied dispatches through to the SCALAR tied method, otherwise if the hash contains no keys returns 0, otherwise returns a mortal sv containing a string specifying the number of used buckets, followed by a slash, followed by the number of available buckets. This function is expensive, it must scan all of the buckets to determine which are used, and the count is NOT cached. In a large hash this could be a lot of buckets. SV* hv_bucket_ratio(HV *hv) =for hackers Found in file hv.c =item hv_clear X<hv_clear> Frees the all the elements of a hash, leaving it empty. The XS equivalent of C<%hash = ()>. See also L</hv_undef>. See L</av_clear> for a note about the hash possibly being invalid on return. void hv_clear(HV *hv) =for hackers Found in file hv.c =item hv_clear_placeholders X<hv_clear_placeholders> Clears any placeholders from a hash. If a restricted hash has any of its keys marked as readonly and the key is subsequently deleted, the key is not actually deleted but is marked by assigning it a value of C<&PL_sv_placeholder>. This tags it so it will be ignored by future operations such as iterating over the hash, but will still allow the hash to have a value reassigned to the key at some future point. This function clears any such placeholder keys from the hash. See C<L<Hash::Util::lock_keys()|Hash::Util/lock_keys>> for an example of its use. void hv_clear_placeholders(HV *hv) =for hackers Found in file hv.c =item hv_copy_hints_hv X<hv_copy_hints_hv> A specialised version of L</newHVhv> for copying C<%^H>. C<ohv> must be a pointer to a hash (which may have C<%^H> magic, but should be generally non-magical), or C<NULL> (interpreted as an empty hash). The content of C<ohv> is copied to a new hash, which has the C<%^H>-specific magic added to it. A pointer to the new hash is returned. HV * hv_copy_hints_hv(HV *const ohv) =for hackers Found in file hv.c =item hv_delete X<hv_delete> Deletes a key/value pair in the hash. The value's SV is removed from the hash, made mortal, and returned to the caller. The absolute value of C<klen> is the length of the key. If C<klen> is negative the key is assumed to be in UTF-8-encoded Unicode. The C<flags> value will normally be zero; if set to C<G_DISCARD> then C<NULL> will be returned. C<NULL> will also be returned if the key is not found. SV* hv_delete(HV *hv, const char *key, I32 klen, I32 flags) =for hackers Found in file hv.c =item hv_delete_ent X<hv_delete_ent> Deletes a key/value pair in the hash. The value SV is removed from the hash, made mortal, and returned to the caller. The C<flags> value will normally be zero; if set to C<G_DISCARD> then C<NULL> will be returned. C<NULL> will also be returned if the key is not found. C<hash> can be a valid precomputed hash value, or 0 to ask for it to be computed. SV* hv_delete_ent(HV *hv, SV *keysv, I32 flags, U32 hash) =for hackers Found in file hv.c =item HvENAME X<HvENAME> Returns the effective name of a stash, or NULL if there is none. The effective name represents a location in the symbol table where this stash resides. It is updated automatically when packages are aliased or deleted. A stash that is no longer in the symbol table has no effective name. This name is preferable to C<HvNAME> for use in MRO linearisations and isa caches. char* HvENAME(HV* stash) =for hackers Found in file hv.h =item HvENAMELEN X<HvENAMELEN> Returns the length of the stash's effective name. STRLEN HvENAMELEN(HV *stash) =for hackers Found in file hv.h =item HvENAMEUTF8 X<HvENAMEUTF8> Returns true if the effective name is in UTF-8 encoding. unsigned char HvENAMEUTF8(HV *stash) =for hackers Found in file hv.h =item hv_exists X<hv_exists> Returns a boolean indicating whether the specified hash key exists. The absolute value of C<klen> is the length of the key. If C<klen> is negative the key is assumed to be in UTF-8-encoded Unicode. bool hv_exists(HV *hv, const char *key, I32 klen) =for hackers Found in file hv.c =item hv_exists_ent X<hv_exists_ent> Returns a boolean indicating whether the specified hash key exists. C<hash> can be a valid precomputed hash value, or 0 to ask for it to be computed. bool hv_exists_ent(HV *hv, SV *keysv, U32 hash) =for hackers Found in file hv.c =item hv_fetch X<hv_fetch> Returns the SV which corresponds to the specified key in the hash. The absolute value of C<klen> is the length of the key. If C<klen> is negative the key is assumed to be in UTF-8-encoded Unicode. If C<lval> is set then the fetch will be part of a store. This means that if there is no value in the hash associated with the given key, then one is created and a pointer to it is returned. The C<SV*> it points to can be assigned to. But always check that the return value is non-null before dereferencing it to an C<SV*>. See L<perlguts/"Understanding the Magic of Tied Hashes and Arrays"> for more information on how to use this function on tied hashes. SV** hv_fetch(HV *hv, const char *key, I32 klen, I32 lval) =for hackers Found in file hv.c =item hv_fetchs X<hv_fetchs> Like C<hv_fetch>, but takes a literal string instead of a string/length pair. SV** hv_fetchs(HV* tb, "key", I32 lval) =for hackers Found in file handy.h =item hv_fetch_ent X<hv_fetch_ent> Returns the hash entry which corresponds to the specified key in the hash. C<hash> must be a valid precomputed hash number for the given C<key>, or 0 if you want the function to compute it. IF C<lval> is set then the fetch will be part of a store. Make sure the return value is non-null before accessing it. The return value when C<hv> is a tied hash is a pointer to a static location, so be sure to make a copy of the structure if you need to store it somewhere. See L<perlguts/"Understanding the Magic of Tied Hashes and Arrays"> for more information on how to use this function on tied hashes. HE* hv_fetch_ent(HV *hv, SV *keysv, I32 lval, U32 hash) =for hackers Found in file hv.c =item HvFILL X<HvFILL> See L</hv_fill>. STRLEN HvFILL(HV *const hv) =for hackers Found in file hv.h =item hv_fill X<hv_fill> Returns the number of hash buckets that happen to be in use. This function is wrapped by the macro C<HvFILL>. As of perl 5.25 this function is used only for debugging purposes, and the number of used hash buckets is not in any way cached, thus this function can be costly to execute as it must iterate over all the buckets in the hash. NOTE: this function must be explicitly called as Perl_hv_fill with an aTHX_ parameter. STRLEN Perl_hv_fill(pTHX_ HV *const hv) =for hackers Found in file hv.c =item hv_iterinit X<hv_iterinit> Prepares a starting point to traverse a hash table. Returns the number of keys in the hash, including placeholders (i.e. the same as C<HvTOTALKEYS(hv)>). The return value is currently only meaningful for hashes without tie magic. NOTE: Before version 5.004_65, C<hv_iterinit> used to return the number of hash buckets that happen to be in use. If you still need that esoteric value, you can get it through the macro C<HvFILL(hv)>. I32 hv_iterinit(HV *hv) =for hackers Found in file hv.c =item hv_iterkey X<hv_iterkey> Returns the key from the current position of the hash iterator. See C<L</hv_iterinit>>. char* hv_iterkey(HE* entry, I32* retlen) =for hackers Found in file hv.c =item hv_iterkeysv X<hv_iterkeysv> Returns the key as an C<SV*> from the current position of the hash iterator. The return value will always be a mortal copy of the key. Also see C<L</hv_iterinit>>. SV* hv_iterkeysv(HE* entry) =for hackers Found in file hv.c =item hv_iternext X<hv_iternext> Returns entries from a hash iterator. See C<L</hv_iterinit>>. You may call C<hv_delete> or C<hv_delete_ent> on the hash entry that the iterator currently points to, without losing your place or invalidating your iterator. Note that in this case the current entry is deleted from the hash with your iterator holding the last reference to it. Your iterator is flagged to free the entry on the next call to C<hv_iternext>, so you must not discard your iterator immediately else the entry will leak - call C<hv_iternext> to trigger the resource deallocation. HE* hv_iternext(HV *hv) =for hackers Found in file hv.c =item hv_iternextsv X<hv_iternextsv> Performs an C<hv_iternext>, C<hv_iterkey>, and C<hv_iterval> in one operation. SV* hv_iternextsv(HV *hv, char **key, I32 *retlen) =for hackers Found in file hv.c =item hv_iternext_flags X<hv_iternext_flags> NOTE: this function is experimental and may change or be removed without notice. Returns entries from a hash iterator. See C<L</hv_iterinit>> and C<L</hv_iternext>>. The C<flags> value will normally be zero; if C<HV_ITERNEXT_WANTPLACEHOLDERS> is set the placeholders keys (for restricted hashes) will be returned in addition to normal keys. By default placeholders are automatically skipped over. Currently a placeholder is implemented with a value that is C<&PL_sv_placeholder>. Note that the implementation of placeholders and restricted hashes may change, and the implementation currently is insufficiently abstracted for any change to be tidy. HE* hv_iternext_flags(HV *hv, I32 flags) =for hackers Found in file hv.c =item hv_iterval X<hv_iterval> Returns the value from the current position of the hash iterator. See C<L</hv_iterkey>>. SV* hv_iterval(HV *hv, HE *entry) =for hackers Found in file hv.c =item hv_magic X<hv_magic> Adds magic to a hash. See C<L</sv_magic>>. void hv_magic(HV *hv, GV *gv, int how) =for hackers Found in file hv.c =item HvNAME X<HvNAME> Returns the package name of a stash, or C<NULL> if C<stash> isn't a stash. See C<L</SvSTASH>>, C<L</CvSTASH>>. char* HvNAME(HV* stash) =for hackers Found in file hv.h =item HvNAMELEN X<HvNAMELEN> Returns the length of the stash's name. STRLEN HvNAMELEN(HV *stash) =for hackers Found in file hv.h =item HvNAMEUTF8 X<HvNAMEUTF8> Returns true if the name is in UTF-8 encoding. unsigned char HvNAMEUTF8(HV *stash) =for hackers Found in file hv.h =item hv_scalar X<hv_scalar> Evaluates the hash in scalar context and returns the result. When the hash is tied dispatches through to the SCALAR method, otherwise returns a mortal SV containing the number of keys in the hash. Note, prior to 5.25 this function returned what is now returned by the hv_bucket_ratio() function. SV* hv_scalar(HV *hv) =for hackers Found in file hv.c =item hv_store X<hv_store> Stores an SV in a hash. The hash key is specified as C<key> and the absolute value of C<klen> is the length of the key. If C<klen> is negative the key is assumed to be in UTF-8-encoded Unicode. The C<hash> parameter is the precomputed hash value; if it is zero then Perl will compute it. The return value will be C<NULL> if the operation failed or if the value did not need to be actually stored within the hash (as in the case of tied hashes). Otherwise it can be dereferenced to get the original C<SV*>. Note that the caller is responsible for suitably incrementing the reference count of C<val> before the call, and decrementing it if the function returned C<NULL>. Effectively a successful C<hv_store> takes ownership of one reference to C<val>. This is usually what you want; a newly created SV has a reference count of one, so if all your code does is create SVs then store them in a hash, C<hv_store> will own the only reference to the new SV, and your code doesn't need to do anything further to tidy up. C<hv_store> is not implemented as a call to C<hv_store_ent>, and does not create a temporary SV for the key, so if your key data is not already in SV form then use C<hv_store> in preference to C<hv_store_ent>. See L<perlguts/"Understanding the Magic of Tied Hashes and Arrays"> for more information on how to use this function on tied hashes. SV** hv_store(HV *hv, const char *key, I32 klen, SV *val, U32 hash) =for hackers Found in file hv.c =item hv_stores X<hv_stores> Like C<hv_store>, but takes a literal string instead of a string/length pair and omits the hash parameter. SV** hv_stores(HV* tb, "key", SV* val) =for hackers Found in file handy.h =item hv_store_ent X<hv_store_ent> Stores C<val> in a hash. The hash key is specified as C<key>. The C<hash> parameter is the precomputed hash value; if it is zero then Perl will compute it. The return value is the new hash entry so created. It will be C<NULL> if the operation failed or if the value did not need to be actually stored within the hash (as in the case of tied hashes). Otherwise the contents of the return value can be accessed using the C<He?> macros described here. Note that the caller is responsible for suitably incrementing the reference count of C<val> before the call, and decrementing it if the function returned NULL. Effectively a successful C<hv_store_ent> takes ownership of one reference to C<val>. This is usually what you want; a newly created SV has a reference count of one, so if all your code does is create SVs then store them in a hash, C<hv_store> will own the only reference to the new SV, and your code doesn't need to do anything further to tidy up. Note that C<hv_store_ent> only reads the C<key>; unlike C<val> it does not take ownership of it, so maintaining the correct reference count on C<key> is entirely the caller's responsibility. The reason it does not take ownership, is that C<key> is not used after this function returns, and so can be freed immediately. C<hv_store> is not implemented as a call to C<hv_store_ent>, and does not create a temporary SV for the key, so if your key data is not already in SV form then use C<hv_store> in preference to C<hv_store_ent>. See L<perlguts/"Understanding the Magic of Tied Hashes and Arrays"> for more information on how to use this function on tied hashes. HE* hv_store_ent(HV *hv, SV *key, SV *val, U32 hash) =for hackers Found in file hv.c =item hv_undef X<hv_undef> Undefines the hash. The XS equivalent of C<undef(%hash)>. As well as freeing all the elements of the hash (like C<hv_clear()>), this also frees any auxiliary data and storage associated with the hash. See L</av_clear> for a note about the hash possibly being invalid on return. void hv_undef(HV *hv) =for hackers Found in file hv.c =item newHV X<newHV> Creates a new HV. The reference count is set to 1. HV* newHV() =for hackers Found in file hv.h =back =head1 Hook manipulation These functions provide convenient and thread-safe means of manipulating hook variables. =over 8 =item wrap_op_checker X<wrap_op_checker> Puts a C function into the chain of check functions for a specified op type. This is the preferred way to manipulate the L</PL_check> array. C<opcode> specifies which type of op is to be affected. C<new_checker> is a pointer to the C function that is to be added to that opcode's check chain, and C<old_checker_p> points to the storage location where a pointer to the next function in the chain will be stored. The value of C<new_checker> is written into the L</PL_check> array, while the value previously stored there is written to C<*old_checker_p>. L</PL_check> is global to an entire process, and a module wishing to hook op checking may find itself invoked more than once per process, typically in different threads. To handle that situation, this function is idempotent. The location C<*old_checker_p> must initially (once per process) contain a null pointer. A C variable of static duration (declared at file scope, typically also marked C<static> to give it internal linkage) will be implicitly initialised appropriately, if it does not have an explicit initialiser. This function will only actually modify the check chain if it finds C<*old_checker_p> to be null. This function is also thread safe on the small scale. It uses appropriate locking to avoid race conditions in accessing L</PL_check>. When this function is called, the function referenced by C<new_checker> must be ready to be called, except for C<*old_checker_p> being unfilled. In a threading situation, C<new_checker> may be called immediately, even before this function has returned. C<*old_checker_p> will always be appropriately set before C<new_checker> is called. If C<new_checker> decides not to do anything special with an op that it is given (which is the usual case for most uses of op check hooking), it must chain the check function referenced by C<*old_checker_p>. Taken all together, XS code to hook an op checker should typically look something like this: static Perl_check_t nxck_frob; static OP *myck_frob(pTHX_ OP *op) { ... op = nxck_frob(aTHX_ op); ... return op; } BOOT: wrap_op_checker(OP_FROB, myck_frob, &nxck_frob); If you want to influence compilation of calls to a specific subroutine, then use L</cv_set_call_checker_flags> rather than hooking checking of all C<entersub> ops. void wrap_op_checker(Optype opcode, Perl_check_t new_checker, Perl_check_t *old_checker_p) =for hackers Found in file op.c =back =head1 Lexer interface This is the lower layer of the Perl parser, managing characters and tokens. =over 8 =item lex_bufutf8 X<lex_bufutf8> NOTE: this function is experimental and may change or be removed without notice. Indicates whether the octets in the lexer buffer (L</PL_parser-E<gt>linestr>) should be interpreted as the UTF-8 encoding of Unicode characters. If not, they should be interpreted as Latin-1 characters. This is analogous to the C<SvUTF8> flag for scalars. In UTF-8 mode, it is not guaranteed that the lexer buffer actually contains valid UTF-8. Lexing code must be robust in the face of invalid encoding. The actual C<SvUTF8> flag of the L</PL_parser-E<gt>linestr> scalar is significant, but not the whole story regarding the input character encoding. Normally, when a file is being read, the scalar contains octets and its C<SvUTF8> flag is off, but the octets should be interpreted as UTF-8 if the C<use utf8> pragma is in effect. During a string eval, however, the scalar may have the C<SvUTF8> flag on, and in this case its octets should be interpreted as UTF-8 unless the C<use bytes> pragma is in effect. This logic may change in the future; use this function instead of implementing the logic yourself. bool lex_bufutf8() =for hackers Found in file toke.c =item lex_discard_to X<lex_discard_to> NOTE: this function is experimental and may change or be removed without notice. Discards the first part of the L</PL_parser-E<gt>linestr> buffer, up to C<ptr>. The remaining content of the buffer will be moved, and all pointers into the buffer updated appropriately. C<ptr> must not be later in the buffer than the position of L</PL_parser-E<gt>bufptr>: it is not permitted to discard text that has yet to be lexed. Normally it is not necessarily to do this directly, because it suffices to use the implicit discarding behaviour of L</lex_next_chunk> and things based on it. However, if a token stretches across multiple lines, and the lexing code has kept multiple lines of text in the buffer for that purpose, then after completion of the token it would be wise to explicitly discard the now-unneeded earlier lines, to avoid future multi-line tokens growing the buffer without bound. void lex_discard_to(char* ptr) =for hackers Found in file toke.c =item lex_grow_linestr X<lex_grow_linestr> NOTE: this function is experimental and may change or be removed without notice. Reallocates the lexer buffer (L</PL_parser-E<gt>linestr>) to accommodate at least C<len> octets (including terminating C<NUL>). Returns a pointer to the reallocated buffer. This is necessary before making any direct modification of the buffer that would increase its length. L</lex_stuff_pvn> provides a more convenient way to insert text into the buffer. Do not use C<SvGROW> or C<sv_grow> directly on C<PL_parser-E<gt>linestr>; this function updates all of the lexer's variables that point directly into the buffer. char* lex_grow_linestr(STRLEN len) =for hackers Found in file toke.c =item lex_next_chunk X<lex_next_chunk> NOTE: this function is experimental and may change or be removed without notice. Reads in the next chunk of text to be lexed, appending it to L</PL_parser-E<gt>linestr>. This should be called when lexing code has looked to the end of the current chunk and wants to know more. It is usual, but not necessary, for lexing to have consumed the entirety of the current chunk at this time. If L</PL_parser-E<gt>bufptr> is pointing to the very end of the current chunk (i.e., the current chunk has been entirely consumed), normally the current chunk will be discarded at the same time that the new chunk is read in. If C<flags> has the C<LEX_KEEP_PREVIOUS> bit set, the current chunk will not be discarded. If the current chunk has not been entirely consumed, then it will not be discarded regardless of the flag. Returns true if some new text was added to the buffer, or false if the buffer has reached the end of the input text. bool lex_next_chunk(U32 flags) =for hackers Found in file toke.c =item lex_peek_unichar X<lex_peek_unichar> NOTE: this function is experimental and may change or be removed without notice. Looks ahead one (Unicode) character in the text currently being lexed. Returns the codepoint (unsigned integer value) of the next character, or -1 if lexing has reached the end of the input text. To consume the peeked character, use L</lex_read_unichar>. If the next character is in (or extends into) the next chunk of input text, the next chunk will be read in. Normally the current chunk will be discarded at the same time, but if C<flags> has the C<LEX_KEEP_PREVIOUS> bit set, then the current chunk will not be discarded. If the input is being interpreted as UTF-8 and a UTF-8 encoding error is encountered, an exception is generated. I32 lex_peek_unichar(U32 flags) =for hackers Found in file toke.c =item lex_read_space X<lex_read_space> NOTE: this function is experimental and may change or be removed without notice. Reads optional spaces, in Perl style, in the text currently being lexed. The spaces may include ordinary whitespace characters and Perl-style comments. C<#line> directives are processed if encountered. L</PL_parser-E<gt>bufptr> is moved past the spaces, so that it points at a non-space character (or the end of the input text). If spaces extend into the next chunk of input text, the next chunk will be read in. Normally the current chunk will be discarded at the same time, but if C<flags> has the C<LEX_KEEP_PREVIOUS> bit set, then the current chunk will not be discarded. void lex_read_space(U32 flags) =for hackers Found in file toke.c =item lex_read_to X<lex_read_to> NOTE: this function is experimental and may change or be removed without notice. Consume text in the lexer buffer, from L</PL_parser-E<gt>bufptr> up to C<ptr>. This advances L</PL_parser-E<gt>bufptr> to match C<ptr>, performing the correct bookkeeping whenever a newline character is passed. This is the normal way to consume lexed text. Interpretation of the buffer's octets can be abstracted out by using the slightly higher-level functions L</lex_peek_unichar> and L</lex_read_unichar>. void lex_read_to(char* ptr) =for hackers Found in file toke.c =item lex_read_unichar X<lex_read_unichar> NOTE: this function is experimental and may change or be removed without notice. Reads the next (Unicode) character in the text currently being lexed. Returns the codepoint (unsigned integer value) of the character read, and moves L</PL_parser-E<gt>bufptr> past the character, or returns -1 if lexing has reached the end of the input text. To non-destructively examine the next character, use L</lex_peek_unichar> instead. If the next character is in (or extends into) the next chunk of input text, the next chunk will be read in. Normally the current chunk will be discarded at the same time, but if C<flags> has the C<LEX_KEEP_PREVIOUS> bit set, then the current chunk will not be discarded. If the input is being interpreted as UTF-8 and a UTF-8 encoding error is encountered, an exception is generated. I32 lex_read_unichar(U32 flags) =for hackers Found in file toke.c =item lex_start X<lex_start> NOTE: this function is experimental and may change or be removed without notice. Creates and initialises a new lexer/parser state object, supplying a context in which to lex and parse from a new source of Perl code. A pointer to the new state object is placed in L</PL_parser>. An entry is made on the save stack so that upon unwinding, the new state object will be destroyed and the former value of L</PL_parser> will be restored. Nothing else need be done to clean up the parsing context. The code to be parsed comes from C<line> and C<rsfp>. C<line>, if non-null, provides a string (in SV form) containing code to be parsed. A copy of the string is made, so subsequent modification of C<line> does not affect parsing. C<rsfp>, if non-null, provides an input stream from which code will be read to be parsed. If both are non-null, the code in C<line> comes first and must consist of complete lines of input, and C<rsfp> supplies the remainder of the source. The C<flags> parameter is reserved for future use. Currently it is only used by perl internally, so extensions should always pass zero. void lex_start(SV* line, PerlIO *rsfp, U32 flags) =for hackers Found in file toke.c =item lex_stuff_pv X<lex_stuff_pv> NOTE: this function is experimental and may change or be removed without notice. Insert characters into the lexer buffer (L</PL_parser-E<gt>linestr>), immediately after the current lexing point (L</PL_parser-E<gt>bufptr>), reallocating the buffer if necessary. This means that lexing code that runs later will see the characters as if they had appeared in the input. It is not recommended to do this as part of normal parsing, and most uses of this facility run the risk of the inserted characters being interpreted in an unintended manner. The string to be inserted is represented by octets starting at C<pv> and continuing to the first nul. These octets are interpreted as either UTF-8 or Latin-1, according to whether the C<LEX_STUFF_UTF8> flag is set in C<flags>. The characters are recoded for the lexer buffer, according to how the buffer is currently being interpreted (L</lex_bufutf8>). If it is not convenient to nul-terminate a string to be inserted, the L</lex_stuff_pvn> function is more appropriate. void lex_stuff_pv(const char* pv, U32 flags) =for hackers Found in file toke.c =item lex_stuff_pvn X<lex_stuff_pvn> NOTE: this function is experimental and may change or be removed without notice. Insert characters into the lexer buffer (L</PL_parser-E<gt>linestr>), immediately after the current lexing point (L</PL_parser-E<gt>bufptr>), reallocating the buffer if necessary. This means that lexing code that runs later will see the characters as if they had appeared in the input. It is not recommended to do this as part of normal parsing, and most uses of this facility run the risk of the inserted characters being interpreted in an unintended manner. The string to be inserted is represented by C<len> octets starting at C<pv>. These octets are interpreted as either UTF-8 or Latin-1, according to whether the C<LEX_STUFF_UTF8> flag is set in C<flags>. The characters are recoded for the lexer buffer, according to how the buffer is currently being interpreted (L</lex_bufutf8>). If a string to be inserted is available as a Perl scalar, the L</lex_stuff_sv> function is more convenient. void lex_stuff_pvn(const char* pv, STRLEN len, U32 flags) =for hackers Found in file toke.c =item lex_stuff_pvs X<lex_stuff_pvs> NOTE: this function is experimental and may change or be removed without notice. Like L</lex_stuff_pvn>, but takes a literal string instead of a string/length pair. void lex_stuff_pvs("pv", U32 flags) =for hackers Found in file handy.h =item lex_stuff_sv X<lex_stuff_sv> NOTE: this function is experimental and may change or be removed without notice. Insert characters into the lexer buffer (L</PL_parser-E<gt>linestr>), immediately after the current lexing point (L</PL_parser-E<gt>bufptr>), reallocating the buffer if necessary. This means that lexing code that runs later will see the characters as if they had appeared in the input. It is not recommended to do this as part of normal parsing, and most uses of this facility run the risk of the inserted characters being interpreted in an unintended manner. The string to be inserted is the string value of C<sv>. The characters are recoded for the lexer buffer, according to how the buffer is currently being interpreted (L</lex_bufutf8>). If a string to be inserted is not already a Perl scalar, the L</lex_stuff_pvn> function avoids the need to construct a scalar. void lex_stuff_sv(SV* sv, U32 flags) =for hackers Found in file toke.c =item lex_unstuff X<lex_unstuff> NOTE: this function is experimental and may change or be removed without notice. Discards text about to be lexed, from L</PL_parser-E<gt>bufptr> up to C<ptr>. Text following C<ptr> will be moved, and the buffer shortened. This hides the discarded text from any lexing code that runs later, as if the text had never appeared. This is not the normal way to consume lexed text. For that, use L</lex_read_to>. void lex_unstuff(char* ptr) =for hackers Found in file toke.c =item parse_arithexpr X<parse_arithexpr> NOTE: this function is experimental and may change or be removed without notice. Parse a Perl arithmetic expression. This may contain operators of precedence down to the bit shift operators. The expression must be followed (and thus terminated) either by a comparison or lower-precedence operator or by something that would normally terminate an expression such as semicolon. If C<flags> has the C<PARSE_OPTIONAL> bit set, then the expression is optional, otherwise it is mandatory. It is up to the caller to ensure that the dynamic parser state (L</PL_parser> et al) is correctly set to reflect the source of the code to be parsed and the lexical context for the expression. The op tree representing the expression is returned. If an optional expression is absent, a null pointer is returned, otherwise the pointer will be non-null. If an error occurs in parsing or compilation, in most cases a valid op tree is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. Some compilation errors, however, will throw an exception immediately. OP* parse_arithexpr(U32 flags) =for hackers Found in file toke.c =item parse_barestmt X<parse_barestmt> NOTE: this function is experimental and may change or be removed without notice. Parse a single unadorned Perl statement. This may be a normal imperative statement or a declaration that has compile-time effect. It does not include any label or other affixture. It is up to the caller to ensure that the dynamic parser state (L</PL_parser> et al) is correctly set to reflect the source of the code to be parsed and the lexical context for the statement. The op tree representing the statement is returned. This may be a null pointer if the statement is null, for example if it was actually a subroutine definition (which has compile-time side effects). If not null, it will be ops directly implementing the statement, suitable to pass to L</newSTATEOP>. It will not normally include a C<nextstate> or equivalent op (except for those embedded in a scope contained entirely within the statement). If an error occurs in parsing or compilation, in most cases a valid op tree (most likely null) is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. Some compilation errors, however, will throw an exception immediately. The C<flags> parameter is reserved for future use, and must always be zero. OP* parse_barestmt(U32 flags) =for hackers Found in file toke.c =item parse_block X<parse_block> NOTE: this function is experimental and may change or be removed without notice. Parse a single complete Perl code block. This consists of an opening brace, a sequence of statements, and a closing brace. The block constitutes a lexical scope, so C<my> variables and various compile-time effects can be contained within it. It is up to the caller to ensure that the dynamic parser state (L</PL_parser> et al) is correctly set to reflect the source of the code to be parsed and the lexical context for the statement. The op tree representing the code block is returned. This is always a real op, never a null pointer. It will normally be a C<lineseq> list, including C<nextstate> or equivalent ops. No ops to construct any kind of runtime scope are included by virtue of it being a block. If an error occurs in parsing or compilation, in most cases a valid op tree (most likely null) is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. Some compilation errors, however, will throw an exception immediately. The C<flags> parameter is reserved for future use, and must always be zero. OP* parse_block(U32 flags) =for hackers Found in file toke.c =item parse_fullexpr X<parse_fullexpr> NOTE: this function is experimental and may change or be removed without notice. Parse a single complete Perl expression. This allows the full expression grammar, including the lowest-precedence operators such as C<or>. The expression must be followed (and thus terminated) by a token that an expression would normally be terminated by: end-of-file, closing bracketing punctuation, semicolon, or one of the keywords that signals a postfix expression-statement modifier. If C<flags> has the C<PARSE_OPTIONAL> bit set, then the expression is optional, otherwise it is mandatory. It is up to the caller to ensure that the dynamic parser state (L</PL_parser> et al) is correctly set to reflect the source of the code to be parsed and the lexical context for the expression. The op tree representing the expression is returned. If an optional expression is absent, a null pointer is returned, otherwise the pointer will be non-null. If an error occurs in parsing or compilation, in most cases a valid op tree is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. Some compilation errors, however, will throw an exception immediately. OP* parse_fullexpr(U32 flags) =for hackers Found in file toke.c =item parse_fullstmt X<parse_fullstmt> NOTE: this function is experimental and may change or be removed without notice. Parse a single complete Perl statement. This may be a normal imperative statement or a declaration that has compile-time effect, and may include optional labels. It is up to the caller to ensure that the dynamic parser state (L</PL_parser> et al) is correctly set to reflect the source of the code to be parsed and the lexical context for the statement. The op tree representing the statement is returned. This may be a null pointer if the statement is null, for example if it was actually a subroutine definition (which has compile-time side effects). If not null, it will be the result of a L</newSTATEOP> call, normally including a C<nextstate> or equivalent op. If an error occurs in parsing or compilation, in most cases a valid op tree (most likely null) is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. Some compilation errors, however, will throw an exception immediately. The C<flags> parameter is reserved for future use, and must always be zero. OP* parse_fullstmt(U32 flags) =for hackers Found in file toke.c =item parse_label X<parse_label> NOTE: this function is experimental and may change or be removed without notice. Parse a single label, possibly optional, of the type that may prefix a Perl statement. It is up to the caller to ensure that the dynamic parser state (L</PL_parser> et al) is correctly set to reflect the source of the code to be parsed. If C<flags> has the C<PARSE_OPTIONAL> bit set, then the label is optional, otherwise it is mandatory. The name of the label is returned in the form of a fresh scalar. If an optional label is absent, a null pointer is returned. If an error occurs in parsing, which can only occur if the label is mandatory, a valid label is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. SV* parse_label(U32 flags) =for hackers Found in file toke.c =item parse_listexpr X<parse_listexpr> NOTE: this function is experimental and may change or be removed without notice. Parse a Perl list expression. This may contain operators of precedence down to the comma operator. The expression must be followed (and thus terminated) either by a low-precedence logic operator such as C<or> or by something that would normally terminate an expression such as semicolon. If C<flags> has the C<PARSE_OPTIONAL> bit set, then the expression is optional, otherwise it is mandatory. It is up to the caller to ensure that the dynamic parser state (L</PL_parser> et al) is correctly set to reflect the source of the code to be parsed and the lexical context for the expression. The op tree representing the expression is returned. If an optional expression is absent, a null pointer is returned, otherwise the pointer will be non-null. If an error occurs in parsing or compilation, in most cases a valid op tree is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. Some compilation errors, however, will throw an exception immediately. OP* parse_listexpr(U32 flags) =for hackers Found in file toke.c =item parse_stmtseq X<parse_stmtseq> NOTE: this function is experimental and may change or be removed without notice. Parse a sequence of zero or more Perl statements. These may be normal imperative statements, including optional labels, or declarations that have compile-time effect, or any mixture thereof. The statement sequence ends when a closing brace or end-of-file is encountered in a place where a new statement could have validly started. It is up to the caller to ensure that the dynamic parser state (L</PL_parser> et al) is correctly set to reflect the source of the code to be parsed and the lexical context for the statements. The op tree representing the statement sequence is returned. This may be a null pointer if the statements were all null, for example if there were no statements or if there were only subroutine definitions (which have compile-time side effects). If not null, it will be a C<lineseq> list, normally including C<nextstate> or equivalent ops. If an error occurs in parsing or compilation, in most cases a valid op tree is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. Some compilation errors, however, will throw an exception immediately. The C<flags> parameter is reserved for future use, and must always be zero. OP* parse_stmtseq(U32 flags) =for hackers Found in file toke.c =item parse_subsignature X<parse_subsignature> NOTE: this function is experimental and may change or be removed without notice. Parse a subroutine signature declaration. This is the contents of the parentheses following a named or anonymous subroutine declaration when the C<signatures> feature is enabled. Note that this function neither expects nor consumes the opening and closing parentheses around the signature; it is the caller's job to handle these. This function must only be called during parsing of a subroutine; after L</start_subparse> has been called. It might allocate lexical variables on the pad for the current subroutine. The op tree to unpack the arguments from the stack at runtime is returned. This op tree should appear at the beginning of the compiled function. The caller may wish to use L</op_append_list> to build their function body after it, or splice it together with the body before calling L</newATTRSUB>. The C<flags> parameter is reserved for future use, and must always be zero. OP* parse_subsignature(U32 flags) =for hackers Found in file toke.c =item parse_termexpr X<parse_termexpr> NOTE: this function is experimental and may change or be removed without notice. Parse a Perl term expression. This may contain operators of precedence down to the assignment operators. The expression must be followed (and thus terminated) either by a comma or lower-precedence operator or by something that would normally terminate an expression such as semicolon. If C<flags> has the C<PARSE_OPTIONAL> bit set, then the expression is optional, otherwise it is mandatory. It is up to the caller to ensure that the dynamic parser state (L</PL_parser> et al) is correctly set to reflect the source of the code to be parsed and the lexical context for the expression. The op tree representing the expression is returned. If an optional expression is absent, a null pointer is returned, otherwise the pointer will be non-null. If an error occurs in parsing or compilation, in most cases a valid op tree is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. Some compilation errors, however, will throw an exception immediately. OP* parse_termexpr(U32 flags) =for hackers Found in file toke.c =item PL_parser X<PL_parser> Pointer to a structure encapsulating the state of the parsing operation currently in progress. The pointer can be locally changed to perform a nested parse without interfering with the state of an outer parse. Individual members of C<PL_parser> have their own documentation. =for hackers Found in file toke.c =item PL_parser-E<gt>bufend X<PL_parser-E<gt>bufend> NOTE: this function is experimental and may change or be removed without notice. Direct pointer to the end of the chunk of text currently being lexed, the end of the lexer buffer. This is equal to C<SvPVX(PL_parser-E<gt>linestr) + SvCUR(PL_parser-E<gt>linestr)>. A C<NUL> character (zero octet) is always located at the end of the buffer, and does not count as part of the buffer's contents. =for hackers Found in file toke.c =item PL_parser-E<gt>bufptr X<PL_parser-E<gt>bufptr> NOTE: this function is experimental and may change or be removed without notice. Points to the current position of lexing inside the lexer buffer. Characters around this point may be freely examined, within the range delimited by C<SvPVX(L</PL_parser-E<gt>linestr>)> and L</PL_parser-E<gt>bufend>. The octets of the buffer may be intended to be interpreted as either UTF-8 or Latin-1, as indicated by L</lex_bufutf8>. Lexing code (whether in the Perl core or not) moves this pointer past the characters that it consumes. It is also expected to perform some bookkeeping whenever a newline character is consumed. This movement can be more conveniently performed by the function L</lex_read_to>, which handles newlines appropriately. Interpretation of the buffer's octets can be abstracted out by using the slightly higher-level functions L</lex_peek_unichar> and L</lex_read_unichar>. =for hackers Found in file toke.c =item PL_parser-E<gt>linestart X<PL_parser-E<gt>linestart> NOTE: this function is experimental and may change or be removed without notice. Points to the start of the current line inside the lexer buffer. This is useful for indicating at which column an error occurred, and not much else. This must be updated by any lexing code that consumes a newline; the function L</lex_read_to> handles this detail. =for hackers Found in file toke.c =item PL_parser-E<gt>linestr X<PL_parser-E<gt>linestr> NOTE: this function is experimental and may change or be removed without notice. Buffer scalar containing the chunk currently under consideration of the text currently being lexed. This is always a plain string scalar (for which C<SvPOK> is true). It is not intended to be used as a scalar by normal scalar means; instead refer to the buffer directly by the pointer variables described below. The lexer maintains various C<char*> pointers to things in the C<PL_parser-E<gt>linestr> buffer. If C<PL_parser-E<gt>linestr> is ever reallocated, all of these pointers must be updated. Don't attempt to do this manually, but rather use L</lex_grow_linestr> if you need to reallocate the buffer. The content of the text chunk in the buffer is commonly exactly one complete line of input, up to and including a newline terminator, but there are situations where it is otherwise. The octets of the buffer may be intended to be interpreted as either UTF-8 or Latin-1. The function L</lex_bufutf8> tells you which. Do not use the C<SvUTF8> flag on this scalar, which may disagree with it. For direct examination of the buffer, the variable L</PL_parser-E<gt>bufend> points to the end of the buffer. The current lexing position is pointed to by L</PL_parser-E<gt>bufptr>. Direct use of these pointers is usually preferable to examination of the scalar through normal scalar means. =for hackers Found in file toke.c =item wrap_keyword_plugin X<wrap_keyword_plugin> NOTE: this function is experimental and may change or be removed without notice. Puts a C function into the chain of keyword plugins. This is the preferred way to manipulate the L</PL_keyword_plugin> variable. C<new_plugin> is a pointer to the C function that is to be added to the keyword plugin chain, and C<old_plugin_p> points to the storage location where a pointer to the next function in the chain will be stored. The value of C<new_plugin> is written into the L</PL_keyword_plugin> variable, while the value previously stored there is written to C<*old_plugin_p>. L</PL_keyword_plugin> is global to an entire process, and a module wishing to hook keyword parsing may find itself invoked more than once per process, typically in different threads. To handle that situation, this function is idempotent. The location C<*old_plugin_p> must initially (once per process) contain a null pointer. A C variable of static duration (declared at file scope, typically also marked C<static> to give it internal linkage) will be implicitly initialised appropriately, if it does not have an explicit initialiser. This function will only actually modify the plugin chain if it finds C<*old_plugin_p> to be null. This function is also thread safe on the small scale. It uses appropriate locking to avoid race conditions in accessing L</PL_keyword_plugin>. When this function is called, the function referenced by C<new_plugin> must be ready to be called, except for C<*old_plugin_p> being unfilled. In a threading situation, C<new_plugin> may be called immediately, even before this function has returned. C<*old_plugin_p> will always be appropriately set before C<new_plugin> is called. If C<new_plugin> decides not to do anything special with the identifier that it is given (which is the usual case for most calls to a keyword plugin), it must chain the plugin function referenced by C<*old_plugin_p>. Taken all together, XS code to install a keyword plugin should typically look something like this: static Perl_keyword_plugin_t next_keyword_plugin; static OP *my_keyword_plugin(pTHX_ char *keyword_ptr, STRLEN keyword_len, OP **op_ptr) { if (memEQs(keyword_ptr, keyword_len, "my_new_keyword")) { ... } else { return next_keyword_plugin(aTHX_ keyword_ptr, keyword_len, op_ptr); } } BOOT: wrap_keyword_plugin(my_keyword_plugin, &next_keyword_plugin); Direct access to L</PL_keyword_plugin> should be avoided. void wrap_keyword_plugin( Perl_keyword_plugin_t new_plugin, Perl_keyword_plugin_t *old_plugin_p ) =for hackers Found in file toke.c =back =head1 Locale-related functions and macros =over 8 =item DECLARATION_FOR_LC_NUMERIC_MANIPULATION X<DECLARATION_FOR_LC_NUMERIC_MANIPULATION> This macro should be used as a statement. It declares a private variable (whose name begins with an underscore) that is needed by the other macros in this section. Failing to include this correctly should lead to a syntax error. For compatibility with C89 C compilers it should be placed in a block before any executable statements. void DECLARATION_FOR_LC_NUMERIC_MANIPULATION =for hackers Found in file perl.h =item IN_LOCALE X<IN_LOCALE> Evaluates to TRUE if the plain locale pragma without a parameter (S<C<use locale>>) is in effect. bool IN_LOCALE =for hackers Found in file perl.h =item IN_LOCALE_COMPILETIME X<IN_LOCALE_COMPILETIME> Evaluates to TRUE if, when compiling a perl program (including an C<eval>) if the plain locale pragma without a parameter (S<C<use locale>>) is in effect. bool IN_LOCALE_COMPILETIME =for hackers Found in file perl.h =item IN_LOCALE_RUNTIME X<IN_LOCALE_RUNTIME> Evaluates to TRUE if, when executing a perl program (including an C<eval>) if the plain locale pragma without a parameter (S<C<use locale>>) is in effect. bool IN_LOCALE_RUNTIME =for hackers Found in file perl.h =item Perl_langinfo X<Perl_langinfo> This is an (almost) drop-in replacement for the system C<L<nl_langinfo(3)>>, taking the same C<item> parameter values, and returning the same information. But it is more thread-safe than regular C<nl_langinfo()>, and hides the quirks of Perl's locale handling from your code, and can be used on systems that lack a native C<nl_langinfo>. Expanding on these: =over =item * The reason it isn't quite a drop-in replacement is actually an advantage. The only difference is that it returns S<C<const char *>>, whereas plain C<nl_langinfo()> returns S<C<char *>>, but you are (only by documentation) forbidden to write into the buffer. By declaring this C<const>, the compiler enforces this restriction, so if it is violated, you know at compilation time, rather than getting segfaults at runtime. =item * It delivers the correct results for the C<RADIXCHAR> and C<THOUSEP> items, without you having to write extra code. The reason for the extra code would be because these are from the C<LC_NUMERIC> locale category, which is normally kept set by Perl so that the radix is a dot, and the separator is the empty string, no matter what the underlying locale is supposed to be, and so to get the expected results, you have to temporarily toggle into the underlying locale, and later toggle back. (You could use plain C<nl_langinfo> and C<L</STORE_LC_NUMERIC_FORCE_TO_UNDERLYING>> for this but then you wouldn't get the other advantages of C<Perl_langinfo()>; not keeping C<LC_NUMERIC> in the C (or equivalent) locale would break a lot of CPAN, which is expecting the radix (decimal point) character to be a dot.) =item * The system function it replaces can have its static return buffer trashed, not only by a subesequent call to that function, but by a C<freelocale>, C<setlocale>, or other locale change. The returned buffer of this function is not changed until the next call to it, so the buffer is never in a trashed state. =item * Its return buffer is per-thread, so it also is never overwritten by a call to this function from another thread; unlike the function it replaces. =item * But most importantly, it works on systems that don't have C<nl_langinfo>, such as Windows, hence makes your code more portable. Of the fifty-some possible items specified by the POSIX 2008 standard, L<http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/langinfo.h.html>, only one is completely unimplemented, though on non-Windows platforms, another significant one is also not implemented). It uses various techniques to recover the other items, including calling C<L<localeconv(3)>>, and C<L<strftime(3)>>, both of which are specified in C89, so should be always be available. Later C<strftime()> versions have additional capabilities; C<""> is returned for those not available on your system. It is important to note that when called with an item that is recovered by using C<localeconv>, the buffer from any previous explicit call to C<localeconv> will be overwritten. This means you must save that buffer's contents if you need to access them after a call to this function. (But note that you might not want to be using C<localeconv()> directly anyway, because of issues like the ones listed in the second item of this list (above) for C<RADIXCHAR> and C<THOUSEP>. You can use the methods given in L<perlcall> to call L<POSIX/localeconv> and avoid all the issues, but then you have a hash to unpack). The details for those items which may deviate from what this emulation returns and what a native C<nl_langinfo()> would return are specified in L<I18N::Langinfo>. =back When using C<Perl_langinfo> on systems that don't have a native C<nl_langinfo()>, you must #include "perl_langinfo.h" before the C<perl.h> C<#include>. You can replace your C<langinfo.h> C<#include> with this one. (Doing it this way keeps out the symbols that plain C<langinfo.h> would try to import into the namespace for code that doesn't need it.) The original impetus for C<Perl_langinfo()> was so that code that needs to find out the current currency symbol, floating point radix character, or digit grouping separator can use, on all systems, the simpler and more thread-friendly C<nl_langinfo> API instead of C<L<localeconv(3)>> which is a pain to make thread-friendly. For other fields returned by C<localeconv>, it is better to use the methods given in L<perlcall> to call L<C<POSIX::localeconv()>|POSIX/localeconv>, which is thread-friendly. const char* Perl_langinfo(const nl_item item) =for hackers Found in file locale.c =item Perl_setlocale X<Perl_setlocale> This is an (almost) drop-in replacement for the system L<C<setlocale(3)>>, taking the same parameters, and returning the same information, except that it returns the correct underlying C<LC_NUMERIC> locale. Regular C<setlocale> will instead return C<C> if the underlying locale has a non-dot decimal point character, or a non-empty thousands separator for displaying floating point numbers. This is because perl keeps that locale category such that it has a dot and empty separator, changing the locale briefly during the operations where the underlying one is required. C<Perl_setlocale> knows about this, and compensates; regular C<setlocale> doesn't. Another reason it isn't completely a drop-in replacement is that it is declared to return S<C<const char *>>, whereas the system setlocale omits the C<const> (presumably because its API was specified long ago, and can't be updated; it is illegal to change the information C<setlocale> returns; doing so leads to segfaults.) Finally, C<Perl_setlocale> works under all circumstances, whereas plain C<setlocale> can be completely ineffective on some platforms under some configurations. C<Perl_setlocale> should not be used to change the locale except on systems where the predefined variable C<${^SAFE_LOCALES}> is 1. On some such systems, the system C<setlocale()> is ineffective, returning the wrong information, and failing to actually change the locale. C<Perl_setlocale>, however works properly in all circumstances. The return points to a per-thread static buffer, which is overwritten the next time C<Perl_setlocale> is called from the same thread. const char* Perl_setlocale(const int category, const char* locale) =for hackers Found in file locale.c =item RESTORE_LC_NUMERIC X<RESTORE_LC_NUMERIC> This is used in conjunction with one of the macros L</STORE_LC_NUMERIC_SET_TO_NEEDED> and L</STORE_LC_NUMERIC_FORCE_TO_UNDERLYING> to properly restore the C<LC_NUMERIC> state. A call to L</DECLARATION_FOR_LC_NUMERIC_MANIPULATION> must have been made to declare at compile time a private variable used by this macro and the two C<STORE> ones. This macro should be called as a single statement, not an expression, but with an empty argument list, like this: { DECLARATION_FOR_LC_NUMERIC_MANIPULATION; ... RESTORE_LC_NUMERIC(); ... } void RESTORE_LC_NUMERIC() =for hackers Found in file perl.h =item STORE_LC_NUMERIC_FORCE_TO_UNDERLYING X<STORE_LC_NUMERIC_FORCE_TO_UNDERLYING> This is used by XS code that is C<LC_NUMERIC> locale-aware to force the locale for category C<LC_NUMERIC> to be what perl thinks is the current underlying locale. (The perl interpreter could be wrong about what the underlying locale actually is if some C or XS code has called the C library function L<setlocale(3)> behind its back; calling L</sync_locale> before calling this macro will update perl's records.) A call to L</DECLARATION_FOR_LC_NUMERIC_MANIPULATION> must have been made to declare at compile time a private variable used by this macro. This macro should be called as a single statement, not an expression, but with an empty argument list, like this: { DECLARATION_FOR_LC_NUMERIC_MANIPULATION; ... STORE_LC_NUMERIC_FORCE_TO_UNDERLYING(); ... RESTORE_LC_NUMERIC(); ... } The private variable is used to save the current locale state, so that the requisite matching call to L</RESTORE_LC_NUMERIC> can restore it. On threaded perls not operating with thread-safe functionality, this macro uses a mutex to force a critical section. Therefore the matching RESTORE should be close by, and guaranteed to be called. void STORE_LC_NUMERIC_FORCE_TO_UNDERLYING() =for hackers Found in file perl.h =item STORE_LC_NUMERIC_SET_TO_NEEDED X<STORE_LC_NUMERIC_SET_TO_NEEDED> This is used to help wrap XS or C code that is C<LC_NUMERIC> locale-aware. This locale category is generally kept set to a locale where the decimal radix character is a dot, and the separator between groups of digits is empty. This is because most XS code that reads floating point numbers is expecting them to have this syntax. This macro makes sure the current C<LC_NUMERIC> state is set properly, to be aware of locale if the call to the XS or C code from the Perl program is from within the scope of a S<C<use locale>>; or to ignore locale if the call is instead from outside such scope. This macro is the start of wrapping the C or XS code; the wrap ending is done by calling the L</RESTORE_LC_NUMERIC> macro after the operation. Otherwise the state can be changed that will adversely affect other XS code. A call to L</DECLARATION_FOR_LC_NUMERIC_MANIPULATION> must have been made to declare at compile time a private variable used by this macro. This macro should be called as a single statement, not an expression, but with an empty argument list, like this: { DECLARATION_FOR_LC_NUMERIC_MANIPULATION; ... STORE_LC_NUMERIC_SET_TO_NEEDED(); ... RESTORE_LC_NUMERIC(); ... } On threaded perls not operating with thread-safe functionality, this macro uses a mutex to force a critical section. Therefore the matching RESTORE should be close by, and guaranteed to be called; see L</WITH_LC_NUMERIC_SET_TO_NEEDED> for a more contained way to ensure that. void STORE_LC_NUMERIC_SET_TO_NEEDED() =for hackers Found in file perl.h =item STORE_LC_NUMERIC_SET_TO_NEEDED_IN X<STORE_LC_NUMERIC_SET_TO_NEEDED_IN> Same as L</STORE_LC_NUMERIC_SET_TO_NEEDED> with in_lc_numeric provided as the precalculated value of C<IN_LC(LC_NUMERIC)>. It is the caller's responsibility to ensure that the status of C<PL_compiling> and C<PL_hints> cannot have changed since the precalculation. void STORE_LC_NUMERIC_SET_TO_NEEDED_IN( bool in_lc_numeric ) =for hackers Found in file perl.h =item switch_to_global_locale X<switch_to_global_locale> On systems without locale support, or on typical single-threaded builds, or on platforms that do not support per-thread locale operations, this function does nothing. On such systems that do have locale support, only a locale global to the whole program is available. On multi-threaded builds on systems that do have per-thread locale operations, this function converts the thread it is running in to use the global locale. This is for code that has not yet or cannot be updated to handle multi-threaded locale operation. As long as only a single thread is so-converted, everything works fine, as all the other threads continue to ignore the global one, so only this thread looks at it. However, on Windows systems this isn't quite true prior to Visual Studio 15, at which point Microsoft fixed a bug. A race can occur if you use the following operations on earlier Windows platforms: =over =item L<POSIX::localeconv|POSIX/localeconv> =item L<I18N::Langinfo>, items C<CRNCYSTR> and C<THOUSEP> =item L<perlapi/Perl_langinfo>, items C<CRNCYSTR> and C<THOUSEP> =back The first item is not fixable (except by upgrading to a later Visual Studio release), but it would be possible to work around the latter two items by using the Windows API functions C<GetNumberFormat> and C<GetCurrencyFormat>; patches welcome. Without this function call, threads that use the L<C<setlocale(3)>> system function will not work properly, as all the locale-sensitive functions will look at the per-thread locale, and C<setlocale> will have no effect on this thread. Perl code should convert to either call L<C<Perl_setlocale>|perlapi/Perl_setlocale> (which is a drop-in for the system C<setlocale>) or use the methods given in L<perlcall> to call L<C<POSIX::setlocale>|POSIX/setlocale>. Either one will transparently properly handle all cases of single- vs multi-thread, POSIX 2008-supported or not. Non-Perl libraries, such as C<gtk>, that call the system C<setlocale> can continue to work if this function is called before transferring control to the library. Upon return from the code that needs to use the global locale, L<C<sync_locale()>|perlapi/sync_locale> should be called to restore the safe multi-thread operation. void switch_to_global_locale() =for hackers Found in file locale.c =item sync_locale X<sync_locale> L<C<Perl_setlocale>|perlapi/Perl_setlocale> can be used at any time to query or change the locale (though changing the locale is antisocial and dangerous on multi-threaded systems that don't have multi-thread safe locale operations. (See L<perllocale/Multi-threaded operation>). Using the system L<C<setlocale(3)>> should be avoided. Nevertheless, certain non-Perl libraries called from XS, such as C<Gtk> do so, and this can't be changed. When the locale is changed by XS code that didn't use L<C<Perl_setlocale>|perlapi/Perl_setlocale>, Perl needs to be told that the locale has changed. Use this function to do so, before returning to Perl. The return value is a boolean: TRUE if the global locale at the time of call was in effect; and FALSE if a per-thread locale was in effect. This can be used by the caller that needs to restore things as-they-were to decide whether or not to call L<C<Perl_switch_to_global_locale>|perlapi/switch_to_global_locale>. bool sync_locale() =for hackers Found in file locale.c =item WITH_LC_NUMERIC_SET_TO_NEEDED X<WITH_LC_NUMERIC_SET_TO_NEEDED> This macro invokes the supplied statement or block within the context of a L</STORE_LC_NUMERIC_SET_TO_NEEDED> .. L</RESTORE_LC_NUMERIC> pair if required, so eg: WITH_LC_NUMERIC_SET_TO_NEEDED( SNPRINTF_G(fv, ebuf, sizeof(ebuf), precis) ); is equivalent to: { #ifdef USE_LOCALE_NUMERIC DECLARATION_FOR_LC_NUMERIC_MANIPULATION; STORE_LC_NUMERIC_SET_TO_NEEDED(); #endif SNPRINTF_G(fv, ebuf, sizeof(ebuf), precis); #ifdef USE_LOCALE_NUMERIC RESTORE_LC_NUMERIC(); #endif } void WITH_LC_NUMERIC_SET_TO_NEEDED(block) =for hackers Found in file perl.h =item WITH_LC_NUMERIC_SET_TO_NEEDED_IN X<WITH_LC_NUMERIC_SET_TO_NEEDED_IN> Same as L</WITH_LC_NUMERIC_SET_TO_NEEDED> with in_lc_numeric provided as the precalculated value of C<IN_LC(LC_NUMERIC)>. It is the caller's responsibility to ensure that the status of C<PL_compiling> and C<PL_hints> cannot have changed since the precalculation. void WITH_LC_NUMERIC_SET_TO_NEEDED_IN( bool in_lc_numeric, block ) =for hackers Found in file perl.h =back =head1 Magical Functions =over 8 =item mg_clear X<mg_clear> Clear something magical that the SV represents. See C<L</sv_magic>>. int mg_clear(SV* sv) =for hackers Found in file mg.c =item mg_copy X<mg_copy> Copies the magic from one SV to another. See C<L</sv_magic>>. int mg_copy(SV *sv, SV *nsv, const char *key, I32 klen) =for hackers Found in file mg.c =item mg_find X<mg_find> Finds the magic pointer for C<type> matching the SV. See C<L</sv_magic>>. MAGIC* mg_find(const SV* sv, int type) =for hackers Found in file mg.c =item mg_findext X<mg_findext> Finds the magic pointer of C<type> with the given C<vtbl> for the C<SV>. See C<L</sv_magicext>>. MAGIC* mg_findext(const SV* sv, int type, const MGVTBL *vtbl) =for hackers Found in file mg.c =item mg_free X<mg_free> Free any magic storage used by the SV. See C<L</sv_magic>>. int mg_free(SV* sv) =for hackers Found in file mg.c =item mg_freeext X<mg_freeext> Remove any magic of type C<how> using virtual table C<vtbl> from the SV C<sv>. See L</sv_magic>. C<mg_freeext(sv, how, NULL)> is equivalent to C<mg_free_type(sv, how)>. void mg_freeext(SV* sv, int how, const MGVTBL *vtbl) =for hackers Found in file mg.c =item mg_free_type X<mg_free_type> Remove any magic of type C<how> from the SV C<sv>. See L</sv_magic>. void mg_free_type(SV* sv, int how) =for hackers Found in file mg.c =item mg_get X<mg_get> Do magic before a value is retrieved from the SV. The type of SV must be >= C<SVt_PVMG>. See C<L</sv_magic>>. int mg_get(SV* sv) =for hackers Found in file mg.c =item mg_length X<mg_length> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. Reports on the SV's length in bytes, calling length magic if available, but does not set the UTF8 flag on C<sv>. It will fall back to 'get' magic if there is no 'length' magic, but with no indication as to whether it called 'get' magic. It assumes C<sv> is a C<PVMG> or higher. Use C<sv_len()> instead. U32 mg_length(SV* sv) =for hackers Found in file mg.c =item mg_magical X<mg_magical> Turns on the magical status of an SV. See C<L</sv_magic>>. void mg_magical(SV* sv) =for hackers Found in file mg.c =item mg_set X<mg_set> Do magic after a value is assigned to the SV. See C<L</sv_magic>>. int mg_set(SV* sv) =for hackers Found in file mg.c =item SvGETMAGIC X<SvGETMAGIC> Invokes C<mg_get> on an SV if it has 'get' magic. For example, this will call C<FETCH> on a tied variable. This macro evaluates its argument more than once. void SvGETMAGIC(SV* sv) =for hackers Found in file sv.h =item SvLOCK X<SvLOCK> Arranges for a mutual exclusion lock to be obtained on C<sv> if a suitable module has been loaded. void SvLOCK(SV* sv) =for hackers Found in file sv.h =item SvSETMAGIC X<SvSETMAGIC> Invokes C<mg_set> on an SV if it has 'set' magic. This is necessary after modifying a scalar, in case it is a magical variable like C<$|> or a tied variable (it calls C<STORE>). This macro evaluates its argument more than once. void SvSETMAGIC(SV* sv) =for hackers Found in file sv.h =item SvSetMagicSV X<SvSetMagicSV> Like C<SvSetSV>, but does any set magic required afterwards. void SvSetMagicSV(SV* dsv, SV* ssv) =for hackers Found in file sv.h =item SvSetMagicSV_nosteal X<SvSetMagicSV_nosteal> Like C<SvSetSV_nosteal>, but does any set magic required afterwards. void SvSetMagicSV_nosteal(SV* dsv, SV* ssv) =for hackers Found in file sv.h =item SvSetSV X<SvSetSV> Calls C<sv_setsv> if C<dsv> is not the same as C<ssv>. May evaluate arguments more than once. Does not handle 'set' magic on the destination SV. void SvSetSV(SV* dsv, SV* ssv) =for hackers Found in file sv.h =item SvSetSV_nosteal X<SvSetSV_nosteal> Calls a non-destructive version of C<sv_setsv> if C<dsv> is not the same as C<ssv>. May evaluate arguments more than once. void SvSetSV_nosteal(SV* dsv, SV* ssv) =for hackers Found in file sv.h =item SvSHARE X<SvSHARE> Arranges for C<sv> to be shared between threads if a suitable module has been loaded. void SvSHARE(SV* sv) =for hackers Found in file sv.h =item sv_string_from_errnum X<sv_string_from_errnum> Generates the message string describing an OS error and returns it as an SV. C<errnum> must be a value that C<errno> could take, identifying the type of error. If C<tgtsv> is non-null then the string will be written into that SV (overwriting existing content) and it will be returned. If C<tgtsv> is a null pointer then the string will be written into a new mortal SV which will be returned. The message will be taken from whatever locale would be used by C<$!>, and will be encoded in the SV in whatever manner would be used by C<$!>. The details of this process are subject to future change. Currently, the message is taken from the C locale by default (usually producing an English message), and from the currently selected locale when in the scope of the C<use locale> pragma. A heuristic attempt is made to decode the message from the locale's character encoding, but it will only be decoded as either UTF-8 or ISO-8859-1. It is always correctly decoded in a UTF-8 locale, usually in an ISO-8859-1 locale, and never in any other locale. The SV is always returned containing an actual string, and with no other OK bits set. Unlike C<$!>, a message is even yielded for C<errnum> zero (meaning success), and if no useful message is available then a useless string (currently empty) is returned. SV* sv_string_from_errnum(int errnum, SV* tgtsv) =for hackers Found in file mg.c =item SvUNLOCK X<SvUNLOCK> Releases a mutual exclusion lock on C<sv> if a suitable module has been loaded. void SvUNLOCK(SV* sv) =for hackers Found in file sv.h =back =head1 Memory Management =over 8 =item Copy X<Copy> The XSUB-writer's interface to the C C<memcpy> function. The C<src> is the source, C<dest> is the destination, C<nitems> is the number of items, and C<type> is the type. May fail on overlapping copies. See also C<L</Move>>. void Copy(void* src, void* dest, int nitems, type) =for hackers Found in file handy.h =item CopyD X<CopyD> Like C<Copy> but returns C<dest>. Useful for encouraging compilers to tail-call optimise. void * CopyD(void* src, void* dest, int nitems, type) =for hackers Found in file handy.h =item Move X<Move> The XSUB-writer's interface to the C C<memmove> function. The C<src> is the source, C<dest> is the destination, C<nitems> is the number of items, and C<type> is the type. Can do overlapping moves. See also C<L</Copy>>. void Move(void* src, void* dest, int nitems, type) =for hackers Found in file handy.h =item MoveD X<MoveD> Like C<Move> but returns C<dest>. Useful for encouraging compilers to tail-call optimise. void * MoveD(void* src, void* dest, int nitems, type) =for hackers Found in file handy.h =item Newx X<Newx> The XSUB-writer's interface to the C C<malloc> function. Memory obtained by this should B<ONLY> be freed with L</"Safefree">. In 5.9.3, Newx() and friends replace the older New() API, and drops the first parameter, I<x>, a debug aid which allowed callers to identify themselves. This aid has been superseded by a new build option, PERL_MEM_LOG (see L<perlhacktips/PERL_MEM_LOG>). The older API is still there for use in XS modules supporting older perls. void Newx(void* ptr, int nitems, type) =for hackers Found in file handy.h =item Newxc X<Newxc> The XSUB-writer's interface to the C C<malloc> function, with cast. See also C<L</Newx>>. Memory obtained by this should B<ONLY> be freed with L</"Safefree">. void Newxc(void* ptr, int nitems, type, cast) =for hackers Found in file handy.h =item Newxz X<Newxz> The XSUB-writer's interface to the C C<malloc> function. The allocated memory is zeroed with C<memzero>. See also C<L</Newx>>. Memory obtained by this should B<ONLY> be freed with L</"Safefree">. void Newxz(void* ptr, int nitems, type) =for hackers Found in file handy.h =item Poison X<Poison> PoisonWith(0xEF) for catching access to freed memory. void Poison(void* dest, int nitems, type) =for hackers Found in file handy.h =item PoisonFree X<PoisonFree> PoisonWith(0xEF) for catching access to freed memory. void PoisonFree(void* dest, int nitems, type) =for hackers Found in file handy.h =item PoisonNew X<PoisonNew> PoisonWith(0xAB) for catching access to allocated but uninitialized memory. void PoisonNew(void* dest, int nitems, type) =for hackers Found in file handy.h =item PoisonWith X<PoisonWith> Fill up memory with a byte pattern (a byte repeated over and over again) that hopefully catches attempts to access uninitialized memory. void PoisonWith(void* dest, int nitems, type, U8 byte) =for hackers Found in file handy.h =item Renew X<Renew> The XSUB-writer's interface to the C C<realloc> function. Memory obtained by this should B<ONLY> be freed with L</"Safefree">. void Renew(void* ptr, int nitems, type) =for hackers Found in file handy.h =item Renewc X<Renewc> The XSUB-writer's interface to the C C<realloc> function, with cast. Memory obtained by this should B<ONLY> be freed with L</"Safefree">. void Renewc(void* ptr, int nitems, type, cast) =for hackers Found in file handy.h =item Safefree X<Safefree> The XSUB-writer's interface to the C C<free> function. This should B<ONLY> be used on memory obtained using L</"Newx"> and friends. void Safefree(void* ptr) =for hackers Found in file handy.h =item savepv X<savepv> Perl's version of C<strdup()>. Returns a pointer to a newly allocated string which is a duplicate of C<pv>. The size of the string is determined by C<strlen()>, which means it may not contain embedded C<NUL> characters and must have a trailing C<NUL>. To prevent memory leaks, the memory allocated for the new string needs to be freed when no longer needed. This can be done with the L</C<Safefree>> function, or L<C<SAVEFREEPV>|perlguts/SAVEFREEPV(p)>. On some platforms, Windows for example, all allocated memory owned by a thread is deallocated when that thread ends. So if you need that not to happen, you need to use the shared memory functions, such as C<L</savesharedpv>>. char* savepv(const char* pv) =for hackers Found in file util.c =item savepvn X<savepvn> Perl's version of what C<strndup()> would be if it existed. Returns a pointer to a newly allocated string which is a duplicate of the first C<len> bytes from C<pv>, plus a trailing C<NUL> byte. The memory allocated for the new string can be freed with the C<Safefree()> function. On some platforms, Windows for example, all allocated memory owned by a thread is deallocated when that thread ends. So if you need that not to happen, you need to use the shared memory functions, such as C<L</savesharedpvn>>. char* savepvn(const char* pv, Size_t len) =for hackers Found in file util.c =item savepvs X<savepvs> Like C<savepvn>, but takes a literal string instead of a string/length pair. char* savepvs("literal string") =for hackers Found in file handy.h =item savesharedpv X<savesharedpv> A version of C<savepv()> which allocates the duplicate string in memory which is shared between threads. char* savesharedpv(const char* pv) =for hackers Found in file util.c =item savesharedpvn X<savesharedpvn> A version of C<savepvn()> which allocates the duplicate string in memory which is shared between threads. (With the specific difference that a C<NULL> pointer is not acceptable) char* savesharedpvn(const char *const pv, const STRLEN len) =for hackers Found in file util.c =item savesharedpvs X<savesharedpvs> A version of C<savepvs()> which allocates the duplicate string in memory which is shared between threads. char* savesharedpvs("literal string") =for hackers Found in file handy.h =item savesharedsvpv X<savesharedsvpv> A version of C<savesharedpv()> which allocates the duplicate string in memory which is shared between threads. char* savesharedsvpv(SV *sv) =for hackers Found in file util.c =item savesvpv X<savesvpv> A version of C<savepv()>/C<savepvn()> which gets the string to duplicate from the passed in SV using C<SvPV()> On some platforms, Windows for example, all allocated memory owned by a thread is deallocated when that thread ends. So if you need that not to happen, you need to use the shared memory functions, such as C<L</savesharedsvpv>>. char* savesvpv(SV* sv) =for hackers Found in file util.c =item StructCopy X<StructCopy> This is an architecture-independent macro to copy one structure to another. void StructCopy(type *src, type *dest, type) =for hackers Found in file handy.h =item Zero X<Zero> The XSUB-writer's interface to the C C<memzero> function. The C<dest> is the destination, C<nitems> is the number of items, and C<type> is the type. void Zero(void* dest, int nitems, type) =for hackers Found in file handy.h =item ZeroD X<ZeroD> Like C<Zero> but returns dest. Useful for encouraging compilers to tail-call optimise. void * ZeroD(void* dest, int nitems, type) =for hackers Found in file handy.h =back =head1 Miscellaneous Functions =over 8 =item dump_c_backtrace X<dump_c_backtrace> Dumps the C backtrace to the given C<fp>. Returns true if a backtrace could be retrieved, false if not. bool dump_c_backtrace(PerlIO* fp, int max_depth, int skip) =for hackers Found in file util.c =item fbm_compile X<fbm_compile> Analyzes the string in order to make fast searches on it using C<fbm_instr()> -- the Boyer-Moore algorithm. void fbm_compile(SV* sv, U32 flags) =for hackers Found in file util.c =item fbm_instr X<fbm_instr> Returns the location of the SV in the string delimited by C<big> and C<bigend> (C<bigend>) is the char following the last char). It returns C<NULL> if the string can't be found. The C<sv> does not have to be C<fbm_compiled>, but the search will not be as fast then. char* fbm_instr(unsigned char* big, unsigned char* bigend, SV* littlestr, U32 flags) =for hackers Found in file util.c =item foldEQ X<foldEQ> Returns true if the leading C<len> bytes of the strings C<s1> and C<s2> are the same case-insensitively; false otherwise. Uppercase and lowercase ASCII range bytes match themselves and their opposite case counterparts. Non-cased and non-ASCII range bytes match only themselves. I32 foldEQ(const char* a, const char* b, I32 len) =for hackers Found in file inline.h =item foldEQ_locale X<foldEQ_locale> Returns true if the leading C<len> bytes of the strings C<s1> and C<s2> are the same case-insensitively in the current locale; false otherwise. I32 foldEQ_locale(const char* a, const char* b, I32 len) =for hackers Found in file inline.h =item form X<form> Takes a sprintf-style format pattern and conventional (non-SV) arguments and returns the formatted string. (char *) Perl_form(pTHX_ const char* pat, ...) can be used any place a string (char *) is required: char * s = Perl_form("%d.%d",major,minor); Uses a single private buffer so if you want to format several strings you must explicitly copy the earlier strings away (and free the copies when you are done). char* form(const char* pat, ...) =for hackers Found in file util.c =item getcwd_sv X<getcwd_sv> Fill C<sv> with current working directory int getcwd_sv(SV* sv) =for hackers Found in file util.c =item get_c_backtrace_dump X<get_c_backtrace_dump> Returns a SV containing a dump of C<depth> frames of the call stack, skipping the C<skip> innermost ones. C<depth> of 20 is usually enough. The appended output looks like: ... 1 10e004812:0082 Perl_croak util.c:1716 /usr/bin/perl 2 10df8d6d2:1d72 perl_parse perl.c:3975 /usr/bin/perl ... The fields are tab-separated. The first column is the depth (zero being the innermost non-skipped frame). In the hex:offset, the hex is where the program counter was in C<S_parse_body>, and the :offset (might be missing) tells how much inside the C<S_parse_body> the program counter was. The C<util.c:1716> is the source code file and line number. The F</usr/bin/perl> is obvious (hopefully). Unknowns are C<"-">. Unknowns can happen unfortunately quite easily: if the platform doesn't support retrieving the information; if the binary is missing the debug information; if the optimizer has transformed the code by for example inlining. SV* get_c_backtrace_dump(int max_depth, int skip) =for hackers Found in file util.c =item ibcmp X<ibcmp> This is a synonym for S<C<(! foldEQ())>> I32 ibcmp(const char* a, const char* b, I32 len) =for hackers Found in file util.h =item ibcmp_locale X<ibcmp_locale> This is a synonym for S<C<(! foldEQ_locale())>> I32 ibcmp_locale(const char* a, const char* b, I32 len) =for hackers Found in file util.h =item instr X<instr> Same as L<strstr(3)>, which finds and returns a pointer to the first occurrence of the NUL-terminated substring C<little> in the NUL-terminated string C<big>, returning NULL if not found. The terminating NUL bytes are not compared. char* instr(const char* big, const char* little) =for hackers Found in file util.h =item IS_SAFE_SYSCALL X<IS_SAFE_SYSCALL> Same as L</is_safe_syscall>. bool IS_SAFE_SYSCALL(NN const char *pv, STRLEN len, NN const char *what, NN const char *op_name) =for hackers Found in file perl.h =item is_safe_syscall X<is_safe_syscall> Test that the given C<pv> (with length C<len>) doesn't contain any internal C<NUL> characters. If it does, set C<errno> to C<ENOENT>, optionally warn using the C<syscalls> category, and return FALSE. Return TRUE if the name is safe. C<what> and C<op_name> are used in any warning. Used by the C<IS_SAFE_SYSCALL()> macro. bool is_safe_syscall(const char *pv, STRLEN len, const char *what, const char *op_name) =for hackers Found in file inline.h =item LIKELY X<LIKELY> Returns the input unchanged, but at the same time it gives a branch prediction hint to the compiler that this condition is likely to be true. =for hackers Found in file perl.h =item memCHRs X<memCHRs> Returns the position of the first occurence of the byte C<c> in the literal string C<"list">, or NULL if C<c> doesn't appear in C<"list">. All bytes are treated as unsigned char. Thus this macro can be used to determine if C<c> is in a set of particular characters. Unlike L<strchr(3)>, it works even if C<c> is C<NUL> (and the set doesn't include C<NUL>). bool memCHRs("list", char c) =for hackers Found in file handy.h =item memEQ X<memEQ> Test two buffers (which may contain embedded C<NUL> characters, to see if they are equal. The C<len> parameter indicates the number of bytes to compare. Returns zero if equal, or non-zero if non-equal. bool memEQ(char* s1, char* s2, STRLEN len) =for hackers Found in file handy.h =item memEQs X<memEQs> Like L</memEQ>, but the second string is a literal enclosed in double quotes, C<l1> gives the number of bytes in C<s1>. Returns zero if equal, or non-zero if non-equal. bool memEQs(char* s1, STRLEN l1, "s2") =for hackers Found in file handy.h =item memNE X<memNE> Test two buffers (which may contain embedded C<NUL> characters, to see if they are not equal. The C<len> parameter indicates the number of bytes to compare. Returns zero if non-equal, or non-zero if equal. bool memNE(char* s1, char* s2, STRLEN len) =for hackers Found in file handy.h =item memNEs X<memNEs> Like L</memNE>, but the second string is a literal enclosed in double quotes, C<l1> gives the number of bytes in C<s1>. Returns zero if non-equal, or zero if non-equal. bool memNEs(char* s1, STRLEN l1, "s2") =for hackers Found in file handy.h =item mess X<mess> Take a sprintf-style format pattern and argument list. These are used to generate a string message. If the message does not end with a newline, then it will be extended with some indication of the current location in the code, as described for L</mess_sv>. Normally, the resulting message is returned in a new mortal SV. During global destruction a single SV may be shared between uses of this function. SV* mess(const char* pat, ...) =for hackers Found in file util.c =item mess_sv X<mess_sv> Expands a message, intended for the user, to include an indication of the current location in the code, if the message does not already appear to be complete. C<basemsg> is the initial message or object. If it is a reference, it will be used as-is and will be the result of this function. Otherwise it is used as a string, and if it already ends with a newline, it is taken to be complete, and the result of this function will be the same string. If the message does not end with a newline, then a segment such as C<at foo.pl line 37> will be appended, and possibly other clauses indicating the current state of execution. The resulting message will end with a dot and a newline. Normally, the resulting message is returned in a new mortal SV. During global destruction a single SV may be shared between uses of this function. If C<consume> is true, then the function is permitted (but not required) to modify and return C<basemsg> instead of allocating a new SV. SV* mess_sv(SV* basemsg, bool consume) =for hackers Found in file util.c =item my_snprintf X<my_snprintf> The C library C<snprintf> functionality, if available and standards-compliant (uses C<vsnprintf>, actually). However, if the C<vsnprintf> is not available, will unfortunately use the unsafe C<vsprintf> which can overrun the buffer (there is an overrun check, but that may be too late). Consider using C<sv_vcatpvf> instead, or getting C<vsnprintf>. int my_snprintf(char *buffer, const Size_t len, const char *format, ...) =for hackers Found in file util.c =item my_sprintf X<my_sprintf> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. Do NOT use this due to the possibility of overflowing C<buffer>. Instead use my_snprintf() int my_sprintf(NN char *buffer, NN const char *pat, ...) =for hackers Found in file perl.h =item my_strlcat X<my_strlcat> The C library C<strlcat> if available, or a Perl implementation of it. This operates on C C<NUL>-terminated strings. C<my_strlcat()> appends string C<src> to the end of C<dst>. It will append at most S<C<size - strlen(dst) - 1>> characters. It will then C<NUL>-terminate, unless C<size> is 0 or the original C<dst> string was longer than C<size> (in practice this should not happen as it means that either C<size> is incorrect or that C<dst> is not a proper C<NUL>-terminated string). Note that C<size> is the full size of the destination buffer and the result is guaranteed to be C<NUL>-terminated if there is room. Note that room for the C<NUL> should be included in C<size>. The return value is the total length that C<dst> would have if C<size> is sufficiently large. Thus it is the initial length of C<dst> plus the length of C<src>. If C<size> is smaller than the return, the excess was not appended. Size_t my_strlcat(char *dst, const char *src, Size_t size) =for hackers Found in file util.c =item my_strlcpy X<my_strlcpy> The C library C<strlcpy> if available, or a Perl implementation of it. This operates on C C<NUL>-terminated strings. C<my_strlcpy()> copies up to S<C<size - 1>> characters from the string C<src> to C<dst>, C<NUL>-terminating the result if C<size> is not 0. The return value is the total length C<src> would be if the copy completely succeeded. If it is larger than C<size>, the excess was not copied. Size_t my_strlcpy(char *dst, const char *src, Size_t size) =for hackers Found in file util.c =item my_strnlen X<my_strnlen> The C library C<strnlen> if available, or a Perl implementation of it. C<my_strnlen()> computes the length of the string, up to C<maxlen> characters. It will never attempt to address more than C<maxlen> characters, making it suitable for use with strings that are not guaranteed to be NUL-terminated. Size_t my_strnlen(const char *str, Size_t maxlen) =for hackers Found in file inline.h =item my_vsnprintf X<my_vsnprintf> The C library C<vsnprintf> if available and standards-compliant. However, if the C<vsnprintf> is not available, will unfortunately use the unsafe C<vsprintf> which can overrun the buffer (there is an overrun check, but that may be too late). Consider using C<sv_vcatpvf> instead, or getting C<vsnprintf>. int my_vsnprintf(char *buffer, const Size_t len, const char *format, va_list ap) =for hackers Found in file util.c =item ninstr X<ninstr> Find the first (leftmost) occurrence of a sequence of bytes within another sequence. This is the Perl version of C<strstr()>, extended to handle arbitrary sequences, potentially containing embedded C<NUL> characters (C<NUL> is what the initial C<n> in the function name stands for; some systems have an equivalent, C<memmem()>, but with a somewhat different API). Another way of thinking about this function is finding a needle in a haystack. C<big> points to the first byte in the haystack. C<big_end> points to one byte beyond the final byte in the haystack. C<little> points to the first byte in the needle. C<little_end> points to one byte beyond the final byte in the needle. All the parameters must be non-C<NULL>. The function returns C<NULL> if there is no occurrence of C<little> within C<big>. If C<little> is the empty string, C<big> is returned. Because this function operates at the byte level, and because of the inherent characteristics of UTF-8 (or UTF-EBCDIC), it will work properly if both the needle and the haystack are strings with the same UTF-8ness, but not if the UTF-8ness differs. char* ninstr(const char* big, const char* bigend, const char* little, const char* lend) =for hackers Found in file util.c =item PERL_SYS_INIT X<PERL_SYS_INIT> Provides system-specific tune up of the C runtime environment necessary to run Perl interpreters. This should be called only once, before creating any Perl interpreters. void PERL_SYS_INIT(int *argc, char*** argv) =for hackers Found in file perl.h =item PERL_SYS_INIT3 X<PERL_SYS_INIT3> Provides system-specific tune up of the C runtime environment necessary to run Perl interpreters. This should be called only once, before creating any Perl interpreters. void PERL_SYS_INIT3(int *argc, char*** argv, char*** env) =for hackers Found in file perl.h =item PERL_SYS_TERM X<PERL_SYS_TERM> Provides system-specific clean up of the C runtime environment after running Perl interpreters. This should be called only once, after freeing any remaining Perl interpreters. void PERL_SYS_TERM() =for hackers Found in file perl.h =item READ_XDIGIT X<READ_XDIGIT> Returns the value of an ASCII-range hex digit and advances the string pointer. Behaviour is only well defined when isXDIGIT(*str) is true. U8 READ_XDIGIT(char str*) =for hackers Found in file handy.h =item rninstr X<rninstr> Like C<L</ninstr>>, but instead finds the final (rightmost) occurrence of a sequence of bytes within another sequence, returning C<NULL> if there is no such occurrence. char* rninstr(const char* big, const char* bigend, const char* little, const char* lend) =for hackers Found in file util.c =item STMT_START X<STMT_START> STMT_START { statements; } STMT_END; can be used as a single statement, as in if (x) STMT_START { ... } STMT_END; else ... These are often used in macro definitions. Note that you can't return a value out of them. =for hackers Found in file perl.h =item strEQ X<strEQ> Test two C<NUL>-terminated strings to see if they are equal. Returns true or false. bool strEQ(char* s1, char* s2) =for hackers Found in file handy.h =item strGE X<strGE> Test two C<NUL>-terminated strings to see if the first, C<s1>, is greater than or equal to the second, C<s2>. Returns true or false. bool strGE(char* s1, char* s2) =for hackers Found in file handy.h =item strGT X<strGT> Test two C<NUL>-terminated strings to see if the first, C<s1>, is greater than the second, C<s2>. Returns true or false. bool strGT(char* s1, char* s2) =for hackers Found in file handy.h =item strLE X<strLE> Test two C<NUL>-terminated strings to see if the first, C<s1>, is less than or equal to the second, C<s2>. Returns true or false. bool strLE(char* s1, char* s2) =for hackers Found in file handy.h =item strLT X<strLT> Test two C<NUL>-terminated strings to see if the first, C<s1>, is less than the second, C<s2>. Returns true or false. bool strLT(char* s1, char* s2) =for hackers Found in file handy.h =item strNE X<strNE> Test two C<NUL>-terminated strings to see if they are different. Returns true or false. bool strNE(char* s1, char* s2) =for hackers Found in file handy.h =item strnEQ X<strnEQ> Test two C<NUL>-terminated strings to see if they are equal. The C<len> parameter indicates the number of bytes to compare. Returns true or false. (A wrapper for C<strncmp>). bool strnEQ(char* s1, char* s2, STRLEN len) =for hackers Found in file handy.h =item strnNE X<strnNE> Test two C<NUL>-terminated strings to see if they are different. The C<len> parameter indicates the number of bytes to compare. Returns true or false. (A wrapper for C<strncmp>). bool strnNE(char* s1, char* s2, STRLEN len) =for hackers Found in file handy.h =item sv_destroyable X<sv_destroyable> Dummy routine which reports that object can be destroyed when there is no sharing module present. It ignores its single SV argument, and returns 'true'. Exists to avoid test for a C<NULL> function pointer and because it could potentially warn under some level of strict-ness. bool sv_destroyable(SV *sv) =for hackers Found in file util.c =item sv_nosharing X<sv_nosharing> Dummy routine which "shares" an SV when there is no sharing module present. Or "locks" it. Or "unlocks" it. In other words, ignores its single SV argument. Exists to avoid test for a C<NULL> function pointer and because it could potentially warn under some level of strict-ness. void sv_nosharing(SV *sv) =for hackers Found in file util.c =item UNLIKELY X<UNLIKELY> Returns the input unchanged, but at the same time it gives a branch prediction hint to the compiler that this condition is likely to be false. =for hackers Found in file perl.h =item vmess X<vmess> C<pat> and C<args> are a sprintf-style format pattern and encapsulated argument list, respectively. These are used to generate a string message. If the message does not end with a newline, then it will be extended with some indication of the current location in the code, as described for L</mess_sv>. Normally, the resulting message is returned in a new mortal SV. During global destruction a single SV may be shared between uses of this function. SV* vmess(const char* pat, va_list* args) =for hackers Found in file util.c =back =head1 MRO Functions These functions are related to the method resolution order of perl classes Also see L<perlmroapi>. =over 8 =item mro_get_linear_isa X<mro_get_linear_isa> Returns the mro linearisation for the given stash. By default, this will be whatever C<mro_get_linear_isa_dfs> returns unless some other MRO is in effect for the stash. The return value is a read-only AV*. You are responsible for C<SvREFCNT_inc()> on the return value if you plan to store it anywhere semi-permanently (otherwise it might be deleted out from under you the next time the cache is invalidated). AV* mro_get_linear_isa(HV* stash) =for hackers Found in file mro_core.c =item mro_method_changed_in X<mro_method_changed_in> Invalidates method caching on any child classes of the given stash, so that they might notice the changes in this one. Ideally, all instances of C<PL_sub_generation++> in perl source outside of F<mro.c> should be replaced by calls to this. Perl automatically handles most of the common ways a method might be redefined. However, there are a few ways you could change a method in a stash without the cache code noticing, in which case you need to call this method afterwards: 1) Directly manipulating the stash HV entries from XS code. 2) Assigning a reference to a readonly scalar constant into a stash entry in order to create a constant subroutine (like F<constant.pm> does). This same method is available from pure perl via, C<mro::method_changed_in(classname)>. void mro_method_changed_in(HV* stash) =for hackers Found in file mro_core.c =item mro_register X<mro_register> Registers a custom mro plugin. See L<perlmroapi> for details on this and other mro functions. NOTE: this function must be explicitly called as Perl_mro_register with an aTHX_ parameter. void Perl_mro_register(pTHX_ const struct mro_alg *mro) =for hackers Found in file mro_core.c =back =head1 Multicall Functions =over 8 =item dMULTICALL X<dMULTICALL> Declare local variables for a multicall. See L<perlcall/LIGHTWEIGHT CALLBACKS>. dMULTICALL; =for hackers Found in file cop.h =item MULTICALL X<MULTICALL> Make a lightweight callback. See L<perlcall/LIGHTWEIGHT CALLBACKS>. MULTICALL; =for hackers Found in file cop.h =item POP_MULTICALL X<POP_MULTICALL> Closing bracket for a lightweight callback. See L<perlcall/LIGHTWEIGHT CALLBACKS>. POP_MULTICALL; =for hackers Found in file cop.h =item PUSH_MULTICALL X<PUSH_MULTICALL> Opening bracket for a lightweight callback. See L<perlcall/LIGHTWEIGHT CALLBACKS>. PUSH_MULTICALL(CV* the_cv); =for hackers Found in file cop.h =back =head1 Numeric functions =over 8 =item grok_bin X<grok_bin> converts a string representing a binary number to numeric form. On entry C<start> and C<*len_p> give the string to scan, C<*flags> gives conversion flags, and C<result> should be C<NULL> or a pointer to an NV. The scan stops at the end of the string, or at just before the first invalid character. Unless C<PERL_SCAN_SILENT_ILLDIGIT> is set in C<*flags>, encountering an invalid character (except NUL) will also trigger a warning. On return C<*len_p> is set to the length of the scanned string, and C<*flags> gives output flags. If the value is <= C<UV_MAX> it is returned as a UV, the output flags are clear, and nothing is written to C<*result>. If the value is > C<UV_MAX>, C<grok_bin> returns C<UV_MAX>, sets C<PERL_SCAN_GREATER_THAN_UV_MAX> in the output flags, and writes an approximation of the correct value into C<*result> (which is an NV; or the approximation is discarded if C<result> is NULL). The binary number may optionally be prefixed with C<"0b"> or C<"b"> unless C<PERL_SCAN_DISALLOW_PREFIX> is set in C<*flags> on entry. If C<PERL_SCAN_ALLOW_UNDERSCORES> is set in C<*flags> then any or all pairs of digits may be separated from each other by a single underscore; also a single leading underscore is accepted. UV grok_bin(const char* start, STRLEN* len_p, I32* flags, NV *result) =for hackers Found in file numeric.c =item grok_hex X<grok_hex> converts a string representing a hex number to numeric form. On entry C<start> and C<*len_p> give the string to scan, C<*flags> gives conversion flags, and C<result> should be C<NULL> or a pointer to an NV. The scan stops at the end of the string, or at just before the first invalid character. Unless C<PERL_SCAN_SILENT_ILLDIGIT> is set in C<*flags>, encountering an invalid character (except NUL) will also trigger a warning. On return C<*len_p> is set to the length of the scanned string, and C<*flags> gives output flags. If the value is <= C<UV_MAX> it is returned as a UV, the output flags are clear, and nothing is written to C<*result>. If the value is > C<UV_MAX>, C<grok_hex> returns C<UV_MAX>, sets C<PERL_SCAN_GREATER_THAN_UV_MAX> in the output flags, and writes an approximation of the correct value into C<*result> (which is an NV; or the approximation is discarded if C<result> is NULL). The hex number may optionally be prefixed with C<"0x"> or C<"x"> unless C<PERL_SCAN_DISALLOW_PREFIX> is set in C<*flags> on entry. If C<PERL_SCAN_ALLOW_UNDERSCORES> is set in C<*flags> then any or all pairs of digits may be separated from each other by a single underscore; also a single leading underscore is accepted. UV grok_hex(const char* start, STRLEN* len_p, I32* flags, NV *result) =for hackers Found in file numeric.c =item grok_infnan X<grok_infnan> Helper for C<grok_number()>, accepts various ways of spelling "infinity" or "not a number", and returns one of the following flag combinations: IS_NUMBER_INFINITY IS_NUMBER_NAN IS_NUMBER_INFINITY | IS_NUMBER_NEG IS_NUMBER_NAN | IS_NUMBER_NEG 0 possibly |-ed with C<IS_NUMBER_TRAILING>. If an infinity or a not-a-number is recognized, C<*sp> will point to one byte past the end of the recognized string. If the recognition fails, zero is returned, and C<*sp> will not move. int grok_infnan(const char** sp, const char *send) =for hackers Found in file numeric.c =item grok_number X<grok_number> Identical to C<grok_number_flags()> with C<flags> set to zero. int grok_number(const char *pv, STRLEN len, UV *valuep) =for hackers Found in file numeric.c =item grok_number_flags X<grok_number_flags> Recognise (or not) a number. The type of the number is returned (0 if unrecognised), otherwise it is a bit-ORed combination of C<IS_NUMBER_IN_UV>, C<IS_NUMBER_GREATER_THAN_UV_MAX>, C<IS_NUMBER_NOT_INT>, C<IS_NUMBER_NEG>, C<IS_NUMBER_INFINITY>, C<IS_NUMBER_NAN> (defined in perl.h). If the value of the number can fit in a UV, it is returned in C<*valuep>. C<IS_NUMBER_IN_UV> will be set to indicate that C<*valuep> is valid, C<IS_NUMBER_IN_UV> will never be set unless C<*valuep> is valid, but C<*valuep> may have been assigned to during processing even though C<IS_NUMBER_IN_UV> is not set on return. If C<valuep> is C<NULL>, C<IS_NUMBER_IN_UV> will be set for the same cases as when C<valuep> is non-C<NULL>, but no actual assignment (or SEGV) will occur. C<IS_NUMBER_NOT_INT> will be set with C<IS_NUMBER_IN_UV> if trailing decimals were seen (in which case C<*valuep> gives the true value truncated to an integer), and C<IS_NUMBER_NEG> if the number is negative (in which case C<*valuep> holds the absolute value). C<IS_NUMBER_IN_UV> is not set if e notation was used or the number is larger than a UV. C<flags> allows only C<PERL_SCAN_TRAILING>, which allows for trailing non-numeric text on an otherwise successful I<grok>, setting C<IS_NUMBER_TRAILING> on the result. int grok_number_flags(const char *pv, STRLEN len, UV *valuep, U32 flags) =for hackers Found in file numeric.c =item GROK_NUMERIC_RADIX X<GROK_NUMERIC_RADIX> A synonym for L</grok_numeric_radix> bool GROK_NUMERIC_RADIX(NN const char **sp, NN const char *send) =for hackers Found in file perl.h =item grok_numeric_radix X<grok_numeric_radix> Scan and skip for a numeric decimal separator (radix). bool grok_numeric_radix(const char **sp, const char *send) =for hackers Found in file numeric.c =item grok_oct X<grok_oct> converts a string representing an octal number to numeric form. On entry C<start> and C<*len_p> give the string to scan, C<*flags> gives conversion flags, and C<result> should be C<NULL> or a pointer to an NV. The scan stops at the end of the string, or at just before the first invalid character. Unless C<PERL_SCAN_SILENT_ILLDIGIT> is set in C<*flags>, encountering an invalid character (except NUL) will also trigger a warning. On return C<*len_p> is set to the length of the scanned string, and C<*flags> gives output flags. If the value is <= C<UV_MAX> it is returned as a UV, the output flags are clear, and nothing is written to C<*result>. If the value is > C<UV_MAX>, C<grok_oct> returns C<UV_MAX>, sets C<PERL_SCAN_GREATER_THAN_UV_MAX> in the output flags, and writes an approximation of the correct value into C<*result> (which is an NV; or the approximation is discarded if C<result> is NULL). If C<PERL_SCAN_ALLOW_UNDERSCORES> is set in C<*flags> then any or all pairs of digits may be separated from each other by a single underscore; also a single leading underscore is accepted. The C<PERL_SCAN_DISALLOW_PREFIX> flag is always treated as being set for this function. UV grok_oct(const char* start, STRLEN* len_p, I32* flags, NV *result) =for hackers Found in file numeric.c =item isinfnan X<isinfnan> C<Perl_isinfnan()> is a utility function that returns true if the NV argument is either an infinity or a C<NaN>, false otherwise. To test in more detail, use C<Perl_isinf()> and C<Perl_isnan()>. This is also the logical inverse of Perl_isfinite(). bool isinfnan(NV nv) =for hackers Found in file numeric.c =item IS_NUMBER_GREATER_THAN_UV_MAX X<IS_NUMBER_GREATER_THAN_UV_MAX> bool IS_NUMBER_GREATER_THAN_UV_MAX =for hackers Found in file numeric.c =item IS_NUMBER_INFINITY X<IS_NUMBER_INFINITY> bool IS_NUMBER_INFINITY =for hackers Found in file numeric.c =item IS_NUMBER_IN_UV X<IS_NUMBER_IN_UV> bool IS_NUMBER_IN_UV =for hackers Found in file numeric.c =item IS_NUMBER_NAN X<IS_NUMBER_NAN> bool IS_NUMBER_NAN =for hackers Found in file numeric.c =item IS_NUMBER_NEG X<IS_NUMBER_NEG> bool IS_NUMBER_NEG =for hackers Found in file numeric.c =item IS_NUMBER_NOT_INT X<IS_NUMBER_NOT_INT> bool IS_NUMBER_NOT_INT =for hackers Found in file numeric.c =item my_strtod X<my_strtod> This function is equivalent to the libc strtod() function, and is available even on platforms that lack plain strtod(). Its return value is the best available precision depending on platform capabilities and F<Configure> options. It properly handles the locale radix character, meaning it expects a dot except when called from within the scope of S<C<use locale>>, in which case the radix character should be that specified by the current locale. The synonym Strtod() may be used instead. NV my_strtod(const char * const s, char ** e) =for hackers Found in file numeric.c =item PERL_ABS X<PERL_ABS> Typeless C<abs> or C<fabs>, I<etc>. (The usage below indicates it is for integers, but it works for any type.) Use instead of these, since the C library ones force their argument to be what it is expecting, potentially leading to disaster. But also beware that this evaluates its argument twice, so no C<x++>. int PERL_ABS(int) =for hackers Found in file perl.h =item PERL_INT_MAX X<PERL_INT_MAX> This and C<PERL_INT_MIN>, C<PERL_LONG_MAX>, C<PERL_LONG_MIN>, C<PERL_QUAD_MAX>, C<PERL_SHORT_MAX>, C<PERL_SHORT_MIN>, C<PERL_UCHAR_MAX>, C<PERL_UCHAR_MIN>, C<PERL_UINT_MAX>, C<PERL_ULONG_MAX>, C<PERL_ULONG_MIN>, C<PERL_UQUAD_MAX>, C<PERL_UQUAD_MIN>, C<PERL_USHORT_MAX>, C<PERL_USHORT_MIN>, C<PERL_QUAD_MIN> give the largest and smallest number representable in the current platform in variables of the corresponding types. For signed types, the smallest representable number is the most negative number, the one furthest away from zero. For C99 and later compilers, these correspond to things like C<INT_MAX>, which are available to the C code. But these constants, furnished by Perl, allow code compiled on earlier compilers to portably have access to the same constants. =for hackers Found in file perl.h =item Perl_signbit X<Perl_signbit> NOTE: this function is experimental and may change or be removed without notice. Return a non-zero integer if the sign bit on an NV is set, and 0 if it is not. If F<Configure> detects this system has a C<signbit()> that will work with our NVs, then we just use it via the C<#define> in F<perl.h>. Otherwise, fall back on this implementation. The main use of this function is catching C<-0.0>. C<Configure> notes: This function is called C<'Perl_signbit'> instead of a plain C<'signbit'> because it is easy to imagine a system having a C<signbit()> function or macro that doesn't happen to work with our particular choice of NVs. We shouldn't just re-C<#define> C<signbit> as C<Perl_signbit> and expect the standard system headers to be happy. Also, this is a no-context function (no C<pTHX_>) because C<Perl_signbit()> is usually re-C<#defined> in F<perl.h> as a simple macro call to the system's C<signbit()>. Users should just always call C<Perl_signbit()>. int Perl_signbit(NV f) =for hackers Found in file numeric.c =item scan_bin X<scan_bin> For backwards compatibility. Use C<grok_bin> instead. NV scan_bin(const char* start, STRLEN len, STRLEN* retlen) =for hackers Found in file numeric.c =item scan_hex X<scan_hex> For backwards compatibility. Use C<grok_hex> instead. NV scan_hex(const char* start, STRLEN len, STRLEN* retlen) =for hackers Found in file numeric.c =item scan_oct X<scan_oct> For backwards compatibility. Use C<grok_oct> instead. NV scan_oct(const char* start, STRLEN len, STRLEN* retlen) =for hackers Found in file numeric.c =item Strtod X<Strtod> This is a synonym for L</my_strtod>. NV Strtod(NN const char * const s, NULLOK char ** e) =for hackers Found in file perl.h =item Strtol X<Strtol> Platform and configuration independent C<strtol>. This expands to the appropriate C<strotol>-like function based on the platform and F<Configure> options>. For example it could expand to C<strtoll> or C<strtoq> instead of C<strtol>. NV Strtol(NN const char * const s, NULLOK char ** e, int base) =for hackers Found in file perl.h =item Strtoul X<Strtoul> Platform and configuration independent C<strtoul>. This expands to the appropriate C<strotoul>-like function based on the platform and F<Configure> options>. For example it could expand to C<strtoull> or C<strtouq> instead of C<strtoul>. NV Strtoul(NN const char * const s, NULLOK char ** e, int base) =for hackers Found in file perl.h =back =head1 Obsolete backwards compatibility functions Some of these are also deprecated. You can exclude these from your compiled Perl by adding this option to Configure: C<-Accflags='-DNO_MATHOMS'> =over 8 =item custom_op_desc X<custom_op_desc> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. Return the description of a given custom op. This was once used by the C<OP_DESC> macro, but is no longer: it has only been kept for compatibility, and should not be used. const char * custom_op_desc(const OP *o) =for hackers Found in file mathoms.c =item custom_op_name X<custom_op_name> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. Return the name for a given custom op. This was once used by the C<OP_NAME> macro, but is no longer: it has only been kept for compatibility, and should not be used. const char * custom_op_name(const OP *o) =for hackers Found in file mathoms.c =item gv_fetchmethod X<gv_fetchmethod> See L</gv_fetchmethod_autoload>. GV* gv_fetchmethod(HV* stash, const char* name) =for hackers Found in file mathoms.c =item is_utf8_char X<is_utf8_char> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. Tests if some arbitrary number of bytes begins in a valid UTF-8 character. Note that an INVARIANT (i.e. ASCII on non-EBCDIC machines) character is a valid UTF-8 character. The actual number of bytes in the UTF-8 character will be returned if it is valid, otherwise 0. This function is deprecated due to the possibility that malformed input could cause reading beyond the end of the input buffer. Use L</isUTF8_CHAR> instead. STRLEN is_utf8_char(const U8 *s) =for hackers Found in file mathoms.c =item is_utf8_char_buf X<is_utf8_char_buf> This is identical to the macro L<perlapi/isUTF8_CHAR>. STRLEN is_utf8_char_buf(const U8 *buf, const U8 *buf_end) =for hackers Found in file mathoms.c =item pack_cat X<pack_cat> The engine implementing C<pack()> Perl function. Note: parameters C<next_in_list> and C<flags> are not used. This call should not be used; use C<packlist> instead. void pack_cat(SV *cat, const char *pat, const char *patend, SV **beglist, SV **endlist, SV ***next_in_list, U32 flags) =for hackers Found in file mathoms.c =item pad_compname_type X<pad_compname_type> Looks up the type of the lexical variable at position C<po> in the currently-compiling pad. If the variable is typed, the stash of the class to which it is typed is returned. If not, C<NULL> is returned. HV* pad_compname_type(const PADOFFSET po) =for hackers Found in file mathoms.c =item sv_2pvbyte_nolen X<sv_2pvbyte_nolen> Return a pointer to the byte-encoded representation of the SV. May cause the SV to be downgraded from UTF-8 as a side-effect. Usually accessed via the C<SvPVbyte_nolen> macro. char* sv_2pvbyte_nolen(SV* sv) =for hackers Found in file mathoms.c =item sv_2pvutf8_nolen X<sv_2pvutf8_nolen> Return a pointer to the UTF-8-encoded representation of the SV. May cause the SV to be upgraded to UTF-8 as a side-effect. Usually accessed via the C<SvPVutf8_nolen> macro. char* sv_2pvutf8_nolen(SV* sv) =for hackers Found in file mathoms.c =item sv_2pv_nolen X<sv_2pv_nolen> Like C<sv_2pv()>, but doesn't return the length too. You should usually use the macro wrapper C<SvPV_nolen(sv)> instead. char* sv_2pv_nolen(SV* sv) =for hackers Found in file mathoms.c =item sv_catpvn_mg X<sv_catpvn_mg> Like C<sv_catpvn>, but also handles 'set' magic. void sv_catpvn_mg(SV *sv, const char *ptr, STRLEN len) =for hackers Found in file mathoms.c =item sv_catsv_mg X<sv_catsv_mg> Like C<sv_catsv>, but also handles 'set' magic. void sv_catsv_mg(SV *dsv, SV *ssv) =for hackers Found in file mathoms.c =item sv_force_normal X<sv_force_normal> Undo various types of fakery on an SV: if the PV is a shared string, make a private copy; if we're a ref, stop refing; if we're a glob, downgrade to an C<xpvmg>. See also C<L</sv_force_normal_flags>>. void sv_force_normal(SV *sv) =for hackers Found in file mathoms.c =item sv_iv X<sv_iv> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. A private implementation of the C<SvIVx> macro for compilers which can't cope with complex macro expressions. Always use the macro instead. IV sv_iv(SV* sv) =for hackers Found in file mathoms.c =item sv_nolocking X<sv_nolocking> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. Dummy routine which "locks" an SV when there is no locking module present. Exists to avoid test for a C<NULL> function pointer and because it could potentially warn under some level of strict-ness. "Superseded" by C<sv_nosharing()>. void sv_nolocking(SV *sv) =for hackers Found in file mathoms.c =item sv_nounlocking X<sv_nounlocking> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. Dummy routine which "unlocks" an SV when there is no locking module present. Exists to avoid test for a C<NULL> function pointer and because it could potentially warn under some level of strict-ness. "Superseded" by C<sv_nosharing()>. void sv_nounlocking(SV *sv) =for hackers Found in file mathoms.c =item sv_nv X<sv_nv> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. A private implementation of the C<SvNVx> macro for compilers which can't cope with complex macro expressions. Always use the macro instead. NV sv_nv(SV* sv) =for hackers Found in file mathoms.c =item sv_pv X<sv_pv> Use the C<SvPV_nolen> macro instead char* sv_pv(SV *sv) =for hackers Found in file mathoms.c =item sv_pvbyte X<sv_pvbyte> Use C<SvPVbyte_nolen> instead. char* sv_pvbyte(SV *sv) =for hackers Found in file mathoms.c =item sv_pvbyten X<sv_pvbyten> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. A private implementation of the C<SvPVbyte> macro for compilers which can't cope with complex macro expressions. Always use the macro instead. char* sv_pvbyten(SV *sv, STRLEN *lp) =for hackers Found in file mathoms.c =item sv_pvn X<sv_pvn> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. A private implementation of the C<SvPV> macro for compilers which can't cope with complex macro expressions. Always use the macro instead. char* sv_pvn(SV *sv, STRLEN *lp) =for hackers Found in file mathoms.c =item sv_pvutf8 X<sv_pvutf8> Use the C<SvPVutf8_nolen> macro instead char* sv_pvutf8(SV *sv) =for hackers Found in file mathoms.c =item sv_pvutf8n X<sv_pvutf8n> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. A private implementation of the C<SvPVutf8> macro for compilers which can't cope with complex macro expressions. Always use the macro instead. char* sv_pvutf8n(SV *sv, STRLEN *lp) =for hackers Found in file mathoms.c =item sv_taint X<sv_taint> Taint an SV. Use C<SvTAINTED_on> instead. void sv_taint(SV* sv) =for hackers Found in file mathoms.c =item sv_unref X<sv_unref> Unsets the RV status of the SV, and decrements the reference count of whatever was being referenced by the RV. This can almost be thought of as a reversal of C<newSVrv>. This is C<sv_unref_flags> with the C<flag> being zero. See C<L</SvROK_off>>. void sv_unref(SV* sv) =for hackers Found in file mathoms.c =item sv_usepvn X<sv_usepvn> Tells an SV to use C<ptr> to find its string value. Implemented by calling C<sv_usepvn_flags> with C<flags> of 0, hence does not handle 'set' magic. See C<L</sv_usepvn_flags>>. void sv_usepvn(SV* sv, char* ptr, STRLEN len) =for hackers Found in file mathoms.c =item sv_usepvn_mg X<sv_usepvn_mg> Like C<sv_usepvn>, but also handles 'set' magic. void sv_usepvn_mg(SV *sv, char *ptr, STRLEN len) =for hackers Found in file mathoms.c =item sv_uv X<sv_uv> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. A private implementation of the C<SvUVx> macro for compilers which can't cope with complex macro expressions. Always use the macro instead. UV sv_uv(SV* sv) =for hackers Found in file mathoms.c =item unpack_str X<unpack_str> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. The engine implementing C<unpack()> Perl function. Note: parameters C<strbeg>, C<new_s> and C<ocnt> are not used. This call should not be used, use C<unpackstring> instead. SSize_t unpack_str(const char *pat, const char *patend, const char *s, const char *strbeg, const char *strend, char **new_s, I32 ocnt, U32 flags) =for hackers Found in file mathoms.c =item utf8_to_uvchr X<utf8_to_uvchr> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. Returns the native code point of the first character in the string C<s> which is assumed to be in UTF-8 encoding; C<retlen> will be set to the length, in bytes, of that character. Some, but not all, UTF-8 malformations are detected, and in fact, some malformed input could cause reading beyond the end of the input buffer, which is why this function is deprecated. Use L</utf8_to_uvchr_buf> instead. If C<s> points to one of the detected malformations, and UTF8 warnings are enabled, zero is returned and C<*retlen> is set (if C<retlen> isn't C<NULL>) to -1. If those warnings are off, the computed value if well-defined (or the Unicode REPLACEMENT CHARACTER, if not) is silently returned, and C<*retlen> is set (if C<retlen> isn't NULL) so that (S<C<s> + C<*retlen>>) is the next possible position in C<s> that could begin a non-malformed character. See L</utf8n_to_uvchr> for details on when the REPLACEMENT CHARACTER is returned. UV utf8_to_uvchr(const U8 *s, STRLEN *retlen) =for hackers Found in file mathoms.c =back =head1 Optree construction =over 8 =item newASSIGNOP X<newASSIGNOP> Constructs, checks, and returns an assignment op. C<left> and C<right> supply the parameters of the assignment; they are consumed by this function and become part of the constructed op tree. If C<optype> is C<OP_ANDASSIGN>, C<OP_ORASSIGN>, or C<OP_DORASSIGN>, then a suitable conditional optree is constructed. If C<optype> is the opcode of a binary operator, such as C<OP_BIT_OR>, then an op is constructed that performs the binary operation and assigns the result to the left argument. Either way, if C<optype> is non-zero then C<flags> has no effect. If C<optype> is zero, then a plain scalar or list assignment is constructed. Which type of assignment it is is automatically determined. C<flags> gives the eight bits of C<op_flags>, except that C<OPf_KIDS> will be set automatically, and, shifted up eight bits, the eight bits of C<op_private>, except that the bit with value 1 or 2 is automatically set as required. OP* newASSIGNOP(I32 flags, OP* left, I32 optype, OP* right) =for hackers Found in file op.c =item newBINOP X<newBINOP> Constructs, checks, and returns an op of any binary type. C<type> is the opcode. C<flags> gives the eight bits of C<op_flags>, except that C<OPf_KIDS> will be set automatically, and, shifted up eight bits, the eight bits of C<op_private>, except that the bit with value 1 or 2 is automatically set as required. C<first> and C<last> supply up to two ops to be the direct children of the binary op; they are consumed by this function and become part of the constructed op tree. OP* newBINOP(I32 type, I32 flags, OP* first, OP* last) =for hackers Found in file op.c =item newCONDOP X<newCONDOP> Constructs, checks, and returns a conditional-expression (C<cond_expr>) op. C<flags> gives the eight bits of C<op_flags>, except that C<OPf_KIDS> will be set automatically, and, shifted up eight bits, the eight bits of C<op_private>, except that the bit with value 1 is automatically set. C<first> supplies the expression selecting between the two branches, and C<trueop> and C<falseop> supply the branches; they are consumed by this function and become part of the constructed op tree. OP* newCONDOP(I32 flags, OP* first, OP* trueop, OP* falseop) =for hackers Found in file op.c =item newDEFSVOP X<newDEFSVOP> Constructs and returns an op to access C<$_>. OP* newDEFSVOP() =for hackers Found in file op.c =item newFOROP X<newFOROP> Constructs, checks, and returns an op tree expressing a C<foreach> loop (iteration through a list of values). This is a heavyweight loop, with structure that allows exiting the loop by C<last> and suchlike. C<sv> optionally supplies the variable that will be aliased to each item in turn; if null, it defaults to C<$_>. C<expr> supplies the list of values to iterate over. C<block> supplies the main body of the loop, and C<cont> optionally supplies a C<continue> block that operates as a second half of the body. All of these optree inputs are consumed by this function and become part of the constructed op tree. C<flags> gives the eight bits of C<op_flags> for the C<leaveloop> op and, shifted up eight bits, the eight bits of C<op_private> for the C<leaveloop> op, except that (in both cases) some bits will be set automatically. OP* newFOROP(I32 flags, OP* sv, OP* expr, OP* block, OP* cont) =for hackers Found in file op.c =item newGIVENOP X<newGIVENOP> Constructs, checks, and returns an op tree expressing a C<given> block. C<cond> supplies the expression to whose value C<$_> will be locally aliased, and C<block> supplies the body of the C<given> construct; they are consumed by this function and become part of the constructed op tree. C<defsv_off> must be zero (it used to identity the pad slot of lexical $_). OP* newGIVENOP(OP* cond, OP* block, PADOFFSET defsv_off) =for hackers Found in file op.c =item newGVOP X<newGVOP> Constructs, checks, and returns an op of any type that involves an embedded reference to a GV. C<type> is the opcode. C<flags> gives the eight bits of C<op_flags>. C<gv> identifies the GV that the op should reference; calling this function does not transfer ownership of any reference to it. OP* newGVOP(I32 type, I32 flags, GV* gv) =for hackers Found in file op.c =item newLISTOP X<newLISTOP> Constructs, checks, and returns an op of any list type. C<type> is the opcode. C<flags> gives the eight bits of C<op_flags>, except that C<OPf_KIDS> will be set automatically if required. C<first> and C<last> supply up to two ops to be direct children of the list op; they are consumed by this function and become part of the constructed op tree. For most list operators, the check function expects all the kid ops to be present already, so calling C<newLISTOP(OP_JOIN, ...)> (e.g.) is not appropriate. What you want to do in that case is create an op of type C<OP_LIST>, append more children to it, and then call L</op_convert_list>. See L</op_convert_list> for more information. OP* newLISTOP(I32 type, I32 flags, OP* first, OP* last) =for hackers Found in file op.c =item newLOGOP X<newLOGOP> Constructs, checks, and returns a logical (flow control) op. C<type> is the opcode. C<flags> gives the eight bits of C<op_flags>, except that C<OPf_KIDS> will be set automatically, and, shifted up eight bits, the eight bits of C<op_private>, except that the bit with value 1 is automatically set. C<first> supplies the expression controlling the flow, and C<other> supplies the side (alternate) chain of ops; they are consumed by this function and become part of the constructed op tree. OP* newLOGOP(I32 optype, I32 flags, OP *first, OP *other) =for hackers Found in file op.c =item newLOOPEX X<newLOOPEX> Constructs, checks, and returns a loop-exiting op (such as C<goto> or C<last>). C<type> is the opcode. C<label> supplies the parameter determining the target of the op; it is consumed by this function and becomes part of the constructed op tree. OP* newLOOPEX(I32 type, OP* label) =for hackers Found in file op.c =item newLOOPOP X<newLOOPOP> Constructs, checks, and returns an op tree expressing a loop. This is only a loop in the control flow through the op tree; it does not have the heavyweight loop structure that allows exiting the loop by C<last> and suchlike. C<flags> gives the eight bits of C<op_flags> for the top-level op, except that some bits will be set automatically as required. C<expr> supplies the expression controlling loop iteration, and C<block> supplies the body of the loop; they are consumed by this function and become part of the constructed op tree. C<debuggable> is currently unused and should always be 1. OP* newLOOPOP(I32 flags, I32 debuggable, OP* expr, OP* block) =for hackers Found in file op.c =item newMETHOP X<newMETHOP> Constructs, checks, and returns an op of method type with a method name evaluated at runtime. C<type> is the opcode. C<flags> gives the eight bits of C<op_flags>, except that C<OPf_KIDS> will be set automatically, and, shifted up eight bits, the eight bits of C<op_private>, except that the bit with value 1 is automatically set. C<dynamic_meth> supplies an op which evaluates method name; it is consumed by this function and become part of the constructed op tree. Supported optypes: C<OP_METHOD>. OP* newMETHOP(I32 type, I32 flags, OP* dynamic_meth) =for hackers Found in file op.c =item newMETHOP_named X<newMETHOP_named> Constructs, checks, and returns an op of method type with a constant method name. C<type> is the opcode. C<flags> gives the eight bits of C<op_flags>, and, shifted up eight bits, the eight bits of C<op_private>. C<const_meth> supplies a constant method name; it must be a shared COW string. Supported optypes: C<OP_METHOD_NAMED>. OP* newMETHOP_named(I32 type, I32 flags, SV* const_meth) =for hackers Found in file op.c =item newNULLLIST X<newNULLLIST> Constructs, checks, and returns a new C<stub> op, which represents an empty list expression. OP* newNULLLIST() =for hackers Found in file op.c =item newOP X<newOP> Constructs, checks, and returns an op of any base type (any type that has no extra fields). C<type> is the opcode. C<flags> gives the eight bits of C<op_flags>, and, shifted up eight bits, the eight bits of C<op_private>. OP* newOP(I32 optype, I32 flags) =for hackers Found in file op.c =item newPADOP X<newPADOP> Constructs, checks, and returns an op of any type that involves a reference to a pad element. C<type> is the opcode. C<flags> gives the eight bits of C<op_flags>. A pad slot is automatically allocated, and is populated with C<sv>; this function takes ownership of one reference to it. This function only exists if Perl has been compiled to use ithreads. OP* newPADOP(I32 type, I32 flags, SV* sv) =for hackers Found in file op.c =item newPMOP X<newPMOP> Constructs, checks, and returns an op of any pattern matching type. C<type> is the opcode. C<flags> gives the eight bits of C<op_flags> and, shifted up eight bits, the eight bits of C<op_private>. OP* newPMOP(I32 type, I32 flags) =for hackers Found in file op.c =item newPVOP X<newPVOP> Constructs, checks, and returns an op of any type that involves an embedded C-level pointer (PV). C<type> is the opcode. C<flags> gives the eight bits of C<op_flags>. C<pv> supplies the C-level pointer. Depending on the op type, the memory referenced by C<pv> may be freed when the op is destroyed. If the op is of a freeing type, C<pv> must have been allocated using C<PerlMemShared_malloc>. OP* newPVOP(I32 type, I32 flags, char* pv) =for hackers Found in file op.c =item newRANGE X<newRANGE> Constructs and returns a C<range> op, with subordinate C<flip> and C<flop> ops. C<flags> gives the eight bits of C<op_flags> for the C<flip> op and, shifted up eight bits, the eight bits of C<op_private> for both the C<flip> and C<range> ops, except that the bit with value 1 is automatically set. C<left> and C<right> supply the expressions controlling the endpoints of the range; they are consumed by this function and become part of the constructed op tree. OP* newRANGE(I32 flags, OP* left, OP* right) =for hackers Found in file op.c =item newSLICEOP X<newSLICEOP> Constructs, checks, and returns an C<lslice> (list slice) op. C<flags> gives the eight bits of C<op_flags>, except that C<OPf_KIDS> will be set automatically, and, shifted up eight bits, the eight bits of C<op_private>, except that the bit with value 1 or 2 is automatically set as required. C<listval> and C<subscript> supply the parameters of the slice; they are consumed by this function and become part of the constructed op tree. OP* newSLICEOP(I32 flags, OP* subscript, OP* listop) =for hackers Found in file op.c =item newSTATEOP X<newSTATEOP> Constructs a state op (COP). The state op is normally a C<nextstate> op, but will be a C<dbstate> op if debugging is enabled for currently-compiled code. The state op is populated from C<PL_curcop> (or C<PL_compiling>). If C<label> is non-null, it supplies the name of a label to attach to the state op; this function takes ownership of the memory pointed at by C<label>, and will free it. C<flags> gives the eight bits of C<op_flags> for the state op. If C<o> is null, the state op is returned. Otherwise the state op is combined with C<o> into a C<lineseq> list op, which is returned. C<o> is consumed by this function and becomes part of the returned op tree. OP* newSTATEOP(I32 flags, char* label, OP* o) =for hackers Found in file op.c =item newSVOP X<newSVOP> Constructs, checks, and returns an op of any type that involves an embedded SV. C<type> is the opcode. C<flags> gives the eight bits of C<op_flags>. C<sv> gives the SV to embed in the op; this function takes ownership of one reference to it. OP* newSVOP(I32 type, I32 flags, SV* sv) =for hackers Found in file op.c =item newUNOP X<newUNOP> Constructs, checks, and returns an op of any unary type. C<type> is the opcode. C<flags> gives the eight bits of C<op_flags>, except that C<OPf_KIDS> will be set automatically if required, and, shifted up eight bits, the eight bits of C<op_private>, except that the bit with value 1 is automatically set. C<first> supplies an optional op to be the direct child of the unary op; it is consumed by this function and become part of the constructed op tree. OP* newUNOP(I32 type, I32 flags, OP* first) =for hackers Found in file op.c =item newUNOP_AUX X<newUNOP_AUX> Similar to C<newUNOP>, but creates an C<UNOP_AUX> struct instead, with C<op_aux> initialised to C<aux> OP* newUNOP_AUX(I32 type, I32 flags, OP* first, UNOP_AUX_item *aux) =for hackers Found in file op.c =item newWHENOP X<newWHENOP> Constructs, checks, and returns an op tree expressing a C<when> block. C<cond> supplies the test expression, and C<block> supplies the block that will be executed if the test evaluates to true; they are consumed by this function and become part of the constructed op tree. C<cond> will be interpreted DWIMically, often as a comparison against C<$_>, and may be null to generate a C<default> block. OP* newWHENOP(OP* cond, OP* block) =for hackers Found in file op.c =item newWHILEOP X<newWHILEOP> Constructs, checks, and returns an op tree expressing a C<while> loop. This is a heavyweight loop, with structure that allows exiting the loop by C<last> and suchlike. C<loop> is an optional preconstructed C<enterloop> op to use in the loop; if it is null then a suitable op will be constructed automatically. C<expr> supplies the loop's controlling expression. C<block> supplies the main body of the loop, and C<cont> optionally supplies a C<continue> block that operates as a second half of the body. All of these optree inputs are consumed by this function and become part of the constructed op tree. C<flags> gives the eight bits of C<op_flags> for the C<leaveloop> op and, shifted up eight bits, the eight bits of C<op_private> for the C<leaveloop> op, except that (in both cases) some bits will be set automatically. C<debuggable> is currently unused and should always be 1. C<has_my> can be supplied as true to force the loop body to be enclosed in its own scope. OP* newWHILEOP(I32 flags, I32 debuggable, LOOP* loop, OP* expr, OP* block, OP* cont, I32 has_my) =for hackers Found in file op.c =back =head1 Optree Manipulation Functions =over 8 =item alloccopstash X<alloccopstash> NOTE: this function is experimental and may change or be removed without notice. Available only under threaded builds, this function allocates an entry in C<PL_stashpad> for the stash passed to it. PADOFFSET alloccopstash(HV *hv) =for hackers Found in file op.c =item block_end X<block_end> Handles compile-time scope exit. C<floor> is the savestack index returned by C<block_start>, and C<seq> is the body of the block. Returns the block, possibly modified. OP* block_end(I32 floor, OP* seq) =for hackers Found in file op.c =item block_start X<block_start> Handles compile-time scope entry. Arranges for hints to be restored on block exit and also handles pad sequence numbers to make lexical variables scope right. Returns a savestack index for use with C<block_end>. int block_start(int full) =for hackers Found in file op.c =item ck_entersub_args_list X<ck_entersub_args_list> Performs the default fixup of the arguments part of an C<entersub> op tree. This consists of applying list context to each of the argument ops. This is the standard treatment used on a call marked with C<&>, or a method call, or a call through a subroutine reference, or any other call where the callee can't be identified at compile time, or a call where the callee has no prototype. OP* ck_entersub_args_list(OP *entersubop) =for hackers Found in file op.c =item ck_entersub_args_proto X<ck_entersub_args_proto> Performs the fixup of the arguments part of an C<entersub> op tree based on a subroutine prototype. This makes various modifications to the argument ops, from applying context up to inserting C<refgen> ops, and checking the number and syntactic types of arguments, as directed by the prototype. This is the standard treatment used on a subroutine call, not marked with C<&>, where the callee can be identified at compile time and has a prototype. C<protosv> supplies the subroutine prototype to be applied to the call. It may be a normal defined scalar, of which the string value will be used. Alternatively, for convenience, it may be a subroutine object (a C<CV*> that has been cast to C<SV*>) which has a prototype. The prototype supplied, in whichever form, does not need to match the actual callee referenced by the op tree. If the argument ops disagree with the prototype, for example by having an unacceptable number of arguments, a valid op tree is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. In the error message, the callee is referred to by the name defined by the C<namegv> parameter. OP* ck_entersub_args_proto(OP *entersubop, GV *namegv, SV *protosv) =for hackers Found in file op.c =item ck_entersub_args_proto_or_list X<ck_entersub_args_proto_or_list> Performs the fixup of the arguments part of an C<entersub> op tree either based on a subroutine prototype or using default list-context processing. This is the standard treatment used on a subroutine call, not marked with C<&>, where the callee can be identified at compile time. C<protosv> supplies the subroutine prototype to be applied to the call, or indicates that there is no prototype. It may be a normal scalar, in which case if it is defined then the string value will be used as a prototype, and if it is undefined then there is no prototype. Alternatively, for convenience, it may be a subroutine object (a C<CV*> that has been cast to C<SV*>), of which the prototype will be used if it has one. The prototype (or lack thereof) supplied, in whichever form, does not need to match the actual callee referenced by the op tree. If the argument ops disagree with the prototype, for example by having an unacceptable number of arguments, a valid op tree is returned anyway. The error is reflected in the parser state, normally resulting in a single exception at the top level of parsing which covers all the compilation errors that occurred. In the error message, the callee is referred to by the name defined by the C<namegv> parameter. OP* ck_entersub_args_proto_or_list(OP *entersubop, GV *namegv, SV *protosv) =for hackers Found in file op.c =item cv_const_sv X<cv_const_sv> If C<cv> is a constant sub eligible for inlining, returns the constant value returned by the sub. Otherwise, returns C<NULL>. Constant subs can be created with C<newCONSTSUB> or as described in L<perlsub/"Constant Functions">. SV* cv_const_sv(const CV *const cv) =for hackers Found in file op.c =item cv_get_call_checker X<cv_get_call_checker> The original form of L</cv_get_call_checker_flags>, which does not return checker flags. When using a checker function returned by this function, it is only safe to call it with a genuine GV as its C<namegv> argument. void cv_get_call_checker(CV *cv, Perl_call_checker *ckfun_p, SV **ckobj_p) =for hackers Found in file op.c =item cv_get_call_checker_flags X<cv_get_call_checker_flags> Retrieves the function that will be used to fix up a call to C<cv>. Specifically, the function is applied to an C<entersub> op tree for a subroutine call, not marked with C<&>, where the callee can be identified at compile time as C<cv>. The C-level function pointer is returned in C<*ckfun_p>, an SV argument for it is returned in C<*ckobj_p>, and control flags are returned in C<*ckflags_p>. The function is intended to be called in this manner: entersubop = (*ckfun_p)(aTHX_ entersubop, namegv, (*ckobj_p)); In this call, C<entersubop> is a pointer to the C<entersub> op, which may be replaced by the check function, and C<namegv> supplies the name that should be used by the check function to refer to the callee of the C<entersub> op if it needs to emit any diagnostics. It is permitted to apply the check function in non-standard situations, such as to a call to a different subroutine or to a method call. C<namegv> may not actually be a GV. If the C<CALL_CHECKER_REQUIRE_GV> bit is clear in C<*ckflags_p>, it is permitted to pass a CV or other SV instead, anything that can be used as the first argument to L</cv_name>. If the C<CALL_CHECKER_REQUIRE_GV> bit is set in C<*ckflags_p> then the check function requires C<namegv> to be a genuine GV. By default, the check function is L<Perl_ck_entersub_args_proto_or_list|/ck_entersub_args_proto_or_list>, the SV parameter is C<cv> itself, and the C<CALL_CHECKER_REQUIRE_GV> flag is clear. This implements standard prototype processing. It can be changed, for a particular subroutine, by L</cv_set_call_checker_flags>. If the C<CALL_CHECKER_REQUIRE_GV> bit is set in C<gflags> then it indicates that the caller only knows about the genuine GV version of C<namegv>, and accordingly the corresponding bit will always be set in C<*ckflags_p>, regardless of the check function's recorded requirements. If the C<CALL_CHECKER_REQUIRE_GV> bit is clear in C<gflags> then it indicates the caller knows about the possibility of passing something other than a GV as C<namegv>, and accordingly the corresponding bit may be either set or clear in C<*ckflags_p>, indicating the check function's recorded requirements. C<gflags> is a bitset passed into C<cv_get_call_checker_flags>, in which only the C<CALL_CHECKER_REQUIRE_GV> bit currently has a defined meaning (for which see above). All other bits should be clear. void cv_get_call_checker_flags( CV *cv, U32 gflags, Perl_call_checker *ckfun_p, SV **ckobj_p, U32 *ckflags_p ) =for hackers Found in file op.c =item cv_set_call_checker X<cv_set_call_checker> The original form of L</cv_set_call_checker_flags>, which passes it the C<CALL_CHECKER_REQUIRE_GV> flag for backward-compatibility. The effect of that flag setting is that the check function is guaranteed to get a genuine GV as its C<namegv> argument. void cv_set_call_checker(CV *cv, Perl_call_checker ckfun, SV *ckobj) =for hackers Found in file op.c =item cv_set_call_checker_flags X<cv_set_call_checker_flags> Sets the function that will be used to fix up a call to C<cv>. Specifically, the function is applied to an C<entersub> op tree for a subroutine call, not marked with C<&>, where the callee can be identified at compile time as C<cv>. The C-level function pointer is supplied in C<ckfun>, an SV argument for it is supplied in C<ckobj>, and control flags are supplied in C<ckflags>. The function should be defined like this: STATIC OP * ckfun(pTHX_ OP *op, GV *namegv, SV *ckobj) It is intended to be called in this manner: entersubop = ckfun(aTHX_ entersubop, namegv, ckobj); In this call, C<entersubop> is a pointer to the C<entersub> op, which may be replaced by the check function, and C<namegv> supplies the name that should be used by the check function to refer to the callee of the C<entersub> op if it needs to emit any diagnostics. It is permitted to apply the check function in non-standard situations, such as to a call to a different subroutine or to a method call. C<namegv> may not actually be a GV. For efficiency, perl may pass a CV or other SV instead. Whatever is passed can be used as the first argument to L</cv_name>. You can force perl to pass a GV by including C<CALL_CHECKER_REQUIRE_GV> in the C<ckflags>. C<ckflags> is a bitset, in which only the C<CALL_CHECKER_REQUIRE_GV> bit currently has a defined meaning (for which see above). All other bits should be clear. The current setting for a particular CV can be retrieved by L</cv_get_call_checker_flags>. void cv_set_call_checker_flags( CV *cv, Perl_call_checker ckfun, SV *ckobj, U32 ckflags ) =for hackers Found in file op.c =item LINKLIST X<LINKLIST> Given the root of an optree, link the tree in execution order using the C<op_next> pointers and return the first op executed. If this has already been done, it will not be redone, and C<< o->op_next >> will be returned. If C<< o->op_next >> is not already set, C<o> should be at least an C<UNOP>. OP* LINKLIST(OP *o) =for hackers Found in file op.h =item newCONSTSUB X<newCONSTSUB> Behaves like L</newCONSTSUB_flags>, except that C<name> is nul-terminated rather than of counted length, and no flags are set. (This means that C<name> is always interpreted as Latin-1.) CV* newCONSTSUB(HV* stash, const char* name, SV* sv) =for hackers Found in file op.c =item newCONSTSUB_flags X<newCONSTSUB_flags> Construct a constant subroutine, also performing some surrounding jobs. A scalar constant-valued subroutine is eligible for inlining at compile-time, and in Perl code can be created by S<C<sub FOO () { 123 }>>. Other kinds of constant subroutine have other treatment. The subroutine will have an empty prototype and will ignore any arguments when called. Its constant behaviour is determined by C<sv>. If C<sv> is null, the subroutine will yield an empty list. If C<sv> points to a scalar, the subroutine will always yield that scalar. If C<sv> points to an array, the subroutine will always yield a list of the elements of that array in list context, or the number of elements in the array in scalar context. This function takes ownership of one counted reference to the scalar or array, and will arrange for the object to live as long as the subroutine does. If C<sv> points to a scalar then the inlining assumes that the value of the scalar will never change, so the caller must ensure that the scalar is not subsequently written to. If C<sv> points to an array then no such assumption is made, so it is ostensibly safe to mutate the array or its elements, but whether this is really supported has not been determined. The subroutine will have C<CvFILE> set according to C<PL_curcop>. Other aspects of the subroutine will be left in their default state. The caller is free to mutate the subroutine beyond its initial state after this function has returned. If C<name> is null then the subroutine will be anonymous, with its C<CvGV> referring to an C<__ANON__> glob. If C<name> is non-null then the subroutine will be named accordingly, referenced by the appropriate glob. C<name> is a string of length C<len> bytes giving a sigilless symbol name, in UTF-8 if C<flags> has the C<SVf_UTF8> bit set and in Latin-1 otherwise. The name may be either qualified or unqualified. If the name is unqualified then it defaults to being in the stash specified by C<stash> if that is non-null, or to C<PL_curstash> if C<stash> is null. The symbol is always added to the stash if necessary, with C<GV_ADDMULTI> semantics. C<flags> should not have bits set other than C<SVf_UTF8>. If there is already a subroutine of the specified name, then the new sub will replace the existing one in the glob. A warning may be generated about the redefinition. If the subroutine has one of a few special names, such as C<BEGIN> or C<END>, then it will be claimed by the appropriate queue for automatic running of phase-related subroutines. In this case the relevant glob will be left not containing any subroutine, even if it did contain one before. Execution of the subroutine will likely be a no-op, unless C<sv> was a tied array or the caller modified the subroutine in some interesting way before it was executed. In the case of C<BEGIN>, the treatment is buggy: the sub will be executed when only half built, and may be deleted prematurely, possibly causing a crash. The function returns a pointer to the constructed subroutine. If the sub is anonymous then ownership of one counted reference to the subroutine is transferred to the caller. If the sub is named then the caller does not get ownership of a reference. In most such cases, where the sub has a non-phase name, the sub will be alive at the point it is returned by virtue of being contained in the glob that names it. A phase-named subroutine will usually be alive by virtue of the reference owned by the phase's automatic run queue. A C<BEGIN> subroutine may have been destroyed already by the time this function returns, but currently bugs occur in that case before the caller gets control. It is the caller's responsibility to ensure that it knows which of these situations applies. CV* newCONSTSUB_flags(HV* stash, const char* name, STRLEN len, U32 flags, SV* sv) =for hackers Found in file op.c =item newXS X<newXS> Used by C<xsubpp> to hook up XSUBs as Perl subs. C<filename> needs to be static storage, as it is used directly as CvFILE(), without a copy being made. =for hackers Found in file op.c =item op_append_elem X<op_append_elem> Append an item to the list of ops contained directly within a list-type op, returning the lengthened list. C<first> is the list-type op, and C<last> is the op to append to the list. C<optype> specifies the intended opcode for the list. If C<first> is not already a list of the right type, it will be upgraded into one. If either C<first> or C<last> is null, the other is returned unchanged. OP* op_append_elem(I32 optype, OP* first, OP* last) =for hackers Found in file op.c =item op_append_list X<op_append_list> Concatenate the lists of ops contained directly within two list-type ops, returning the combined list. C<first> and C<last> are the list-type ops to concatenate. C<optype> specifies the intended opcode for the list. If either C<first> or C<last> is not already a list of the right type, it will be upgraded into one. If either C<first> or C<last> is null, the other is returned unchanged. OP* op_append_list(I32 optype, OP* first, OP* last) =for hackers Found in file op.c =item OP_CLASS X<OP_CLASS> Return the class of the provided OP: that is, which of the *OP structures it uses. For core ops this currently gets the information out of C<PL_opargs>, which does not always accurately reflect the type used; in v5.26 onwards, see also the function C<L</op_class>> which can do a better job of determining the used type. For custom ops the type is returned from the registration, and it is up to the registree to ensure it is accurate. The value returned will be one of the C<OA_>* constants from F<op.h>. U32 OP_CLASS(OP *o) =for hackers Found in file op.h =item op_contextualize X<op_contextualize> Applies a syntactic context to an op tree representing an expression. C<o> is the op tree, and C<context> must be C<G_SCALAR>, C<G_ARRAY>, or C<G_VOID> to specify the context to apply. The modified op tree is returned. OP* op_contextualize(OP* o, I32 context) =for hackers Found in file op.c =item op_convert_list X<op_convert_list> Converts C<o> into a list op if it is not one already, and then converts it into the specified C<type>, calling its check function, allocating a target if it needs one, and folding constants. A list-type op is usually constructed one kid at a time via C<newLISTOP>, C<op_prepend_elem> and C<op_append_elem>. Then finally it is passed to C<op_convert_list> to make it the right type. OP* op_convert_list(I32 optype, I32 flags, OP* o) =for hackers Found in file op.c =item OP_DESC X<OP_DESC> Return a short description of the provided OP. const char * OP_DESC(OP *o) =for hackers Found in file op.h =item op_free X<op_free> Free an op and its children. Only use this when an op is no longer linked to from any optree. void op_free(OP* arg) =for hackers Found in file op.c =item OpHAS_SIBLING X<OpHAS_SIBLING> Returns true if C<o> has a sibling bool OpHAS_SIBLING(OP *o) =for hackers Found in file op.h =item OpLASTSIB_set X<OpLASTSIB_set> Marks C<o> as having no further siblings and marks o as having the specified parent. See also C<L</OpMORESIB_set>> and C<OpMAYBESIB_set>. For a higher-level interface, see C<L</op_sibling_splice>>. void OpLASTSIB_set(OP *o, OP *parent) =for hackers Found in file op.h =item op_linklist X<op_linklist> This function is the implementation of the L</LINKLIST> macro. It should not be called directly. OP* op_linklist(OP *o) =for hackers Found in file op.c =item op_lvalue X<op_lvalue> NOTE: this function is experimental and may change or be removed without notice. Propagate lvalue ("modifiable") context to an op and its children. C<type> represents the context type, roughly based on the type of op that would do the modifying, although C<local()> is represented by C<OP_NULL>, because it has no op type of its own (it is signalled by a flag on the lvalue op). This function detects things that can't be modified, such as C<$x+1>, and generates errors for them. For example, C<$x+1 = 2> would cause it to be called with an op of type C<OP_ADD> and a C<type> argument of C<OP_SASSIGN>. It also flags things that need to behave specially in an lvalue context, such as C<$$x = 5> which might have to vivify a reference in C<$x>. OP* op_lvalue(OP* o, I32 type) =for hackers Found in file op.c =item OpMAYBESIB_set X<OpMAYBESIB_set> Conditionally does C<OpMORESIB_set> or C<OpLASTSIB_set> depending on whether C<sib> is non-null. For a higher-level interface, see C<L</op_sibling_splice>>. void OpMAYBESIB_set(OP *o, OP *sib, OP *parent) =for hackers Found in file op.h =item OpMORESIB_set X<OpMORESIB_set> Sets the sibling of C<o> to the non-zero value C<sib>. See also C<L</OpLASTSIB_set>> and C<L</OpMAYBESIB_set>>. For a higher-level interface, see C<L</op_sibling_splice>>. void OpMORESIB_set(OP *o, OP *sib) =for hackers Found in file op.h =item OP_NAME X<OP_NAME> Return the name of the provided OP. For core ops this looks up the name from the op_type; for custom ops from the op_ppaddr. const char * OP_NAME(OP *o) =for hackers Found in file op.h =item op_null X<op_null> Neutralizes an op when it is no longer needed, but is still linked to from other ops. void op_null(OP* o) =for hackers Found in file op.c =item op_parent X<op_parent> Returns the parent OP of C<o>, if it has a parent. Returns C<NULL> otherwise. OP* op_parent(OP *o) =for hackers Found in file op.c =item op_prepend_elem X<op_prepend_elem> Prepend an item to the list of ops contained directly within a list-type op, returning the lengthened list. C<first> is the op to prepend to the list, and C<last> is the list-type op. C<optype> specifies the intended opcode for the list. If C<last> is not already a list of the right type, it will be upgraded into one. If either C<first> or C<last> is null, the other is returned unchanged. OP* op_prepend_elem(I32 optype, OP* first, OP* last) =for hackers Found in file op.c =item op_scope X<op_scope> NOTE: this function is experimental and may change or be removed without notice. Wraps up an op tree with some additional ops so that at runtime a dynamic scope will be created. The original ops run in the new dynamic scope, and then, provided that they exit normally, the scope will be unwound. The additional ops used to create and unwind the dynamic scope will normally be an C<enter>/C<leave> pair, but a C<scope> op may be used instead if the ops are simple enough to not need the full dynamic scope structure. OP* op_scope(OP* o) =for hackers Found in file op.c =item OpSIBLING X<OpSIBLING> Returns the sibling of C<o>, or C<NULL> if there is no sibling OP* OpSIBLING(OP *o) =for hackers Found in file op.h =item op_sibling_splice X<op_sibling_splice> A general function for editing the structure of an existing chain of op_sibling nodes. By analogy with the perl-level C<splice()> function, allows you to delete zero or more sequential nodes, replacing them with zero or more different nodes. Performs the necessary op_first/op_last housekeeping on the parent node and op_sibling manipulation on the children. The last deleted node will be marked as the last node by updating the op_sibling/op_sibparent or op_moresib field as appropriate. Note that op_next is not manipulated, and nodes are not freed; that is the responsibility of the caller. It also won't create a new list op for an empty list etc; use higher-level functions like op_append_elem() for that. C<parent> is the parent node of the sibling chain. It may passed as C<NULL> if the splicing doesn't affect the first or last op in the chain. C<start> is the node preceding the first node to be spliced. Node(s) following it will be deleted, and ops will be inserted after it. If it is C<NULL>, the first node onwards is deleted, and nodes are inserted at the beginning. C<del_count> is the number of nodes to delete. If zero, no nodes are deleted. If -1 or greater than or equal to the number of remaining kids, all remaining kids are deleted. C<insert> is the first of a chain of nodes to be inserted in place of the nodes. If C<NULL>, no nodes are inserted. The head of the chain of deleted ops is returned, or C<NULL> if no ops were deleted. For example: action before after returns ------ ----- ----- ------- P P splice(P, A, 2, X-Y-Z) | | B-C A-B-C-D A-X-Y-Z-D P P splice(P, NULL, 1, X-Y) | | A A-B-C-D X-Y-B-C-D P P splice(P, NULL, 3, NULL) | | A-B-C A-B-C-D D P P splice(P, B, 0, X-Y) | | NULL A-B-C-D A-B-X-Y-C-D For lower-level direct manipulation of C<op_sibparent> and C<op_moresib>, see C<L</OpMORESIB_set>>, C<L</OpLASTSIB_set>>, C<L</OpMAYBESIB_set>>. OP* op_sibling_splice(OP *parent, OP *start, int del_count, OP* insert) =for hackers Found in file op.c =item OP_TYPE_IS X<OP_TYPE_IS> Returns true if the given OP is not a C<NULL> pointer and if it is of the given type. The negation of this macro, C<OP_TYPE_ISNT> is also available as well as C<OP_TYPE_IS_NN> and C<OP_TYPE_ISNT_NN> which elide the NULL pointer check. bool OP_TYPE_IS(OP *o, Optype type) =for hackers Found in file op.h =item OP_TYPE_IS_OR_WAS X<OP_TYPE_IS_OR_WAS> Returns true if the given OP is not a NULL pointer and if it is of the given type or used to be before being replaced by an OP of type OP_NULL. The negation of this macro, C<OP_TYPE_ISNT_AND_WASNT> is also available as well as C<OP_TYPE_IS_OR_WAS_NN> and C<OP_TYPE_ISNT_AND_WASNT_NN> which elide the C<NULL> pointer check. bool OP_TYPE_IS_OR_WAS(OP *o, Optype type) =for hackers Found in file op.h =item rv2cv_op_cv X<rv2cv_op_cv> Examines an op, which is expected to identify a subroutine at runtime, and attempts to determine at compile time which subroutine it identifies. This is normally used during Perl compilation to determine whether a prototype can be applied to a function call. C<cvop> is the op being considered, normally an C<rv2cv> op. A pointer to the identified subroutine is returned, if it could be determined statically, and a null pointer is returned if it was not possible to determine statically. Currently, the subroutine can be identified statically if the RV that the C<rv2cv> is to operate on is provided by a suitable C<gv> or C<const> op. A C<gv> op is suitable if the GV's CV slot is populated. A C<const> op is suitable if the constant value must be an RV pointing to a CV. Details of this process may change in future versions of Perl. If the C<rv2cv> op has the C<OPpENTERSUB_AMPER> flag set then no attempt is made to identify the subroutine statically: this flag is used to suppress compile-time magic on a subroutine call, forcing it to use default runtime behaviour. If C<flags> has the bit C<RV2CVOPCV_MARK_EARLY> set, then the handling of a GV reference is modified. If a GV was examined and its CV slot was found to be empty, then the C<gv> op has the C<OPpEARLY_CV> flag set. If the op is not optimised away, and the CV slot is later populated with a subroutine having a prototype, that flag eventually triggers the warning "called too early to check prototype". If C<flags> has the bit C<RV2CVOPCV_RETURN_NAME_GV> set, then instead of returning a pointer to the subroutine it returns a pointer to the GV giving the most appropriate name for the subroutine in this context. Normally this is just the C<CvGV> of the subroutine, but for an anonymous (C<CvANON>) subroutine that is referenced through a GV it will be the referencing GV. The resulting C<GV*> is cast to C<CV*> to be returned. A null pointer is returned as usual if there is no statically-determinable subroutine. CV* rv2cv_op_cv(OP *cvop, U32 flags) =for hackers Found in file op.c =back =head1 Pack and Unpack =over 8 =item packlist X<packlist> The engine implementing C<pack()> Perl function. void packlist(SV *cat, const char *pat, const char *patend, SV **beglist, SV **endlist) =for hackers Found in file pp_pack.c =item unpackstring X<unpackstring> The engine implementing the C<unpack()> Perl function. Using the template C<pat..patend>, this function unpacks the string C<s..strend> into a number of mortal SVs, which it pushes onto the perl argument (C<@_>) stack (so you will need to issue a C<PUTBACK> before and C<SPAGAIN> after the call to this function). It returns the number of pushed elements. The C<strend> and C<patend> pointers should point to the byte following the last character of each string. Although this function returns its values on the perl argument stack, it doesn't take any parameters from that stack (and thus in particular there's no need to do a C<PUSHMARK> before calling it, unlike L</call_pv> for example). SSize_t unpackstring(const char *pat, const char *patend, const char *s, const char *strend, U32 flags) =for hackers Found in file pp_pack.c =back =head1 Pad Data Structures =over 8 =item CvPADLIST X<CvPADLIST> NOTE: this function is experimental and may change or be removed without notice. CV's can have CvPADLIST(cv) set to point to a PADLIST. This is the CV's scratchpad, which stores lexical variables and opcode temporary and per-thread values. For these purposes "formats" are a kind-of CV; eval""s are too (except they're not callable at will and are always thrown away after the eval"" is done executing). Require'd files are simply evals without any outer lexical scope. XSUBs do not have a C<CvPADLIST>. C<dXSTARG> fetches values from C<PL_curpad>, but that is really the callers pad (a slot of which is allocated by every entersub). Do not get or set C<CvPADLIST> if a CV is an XSUB (as determined by C<CvISXSUB()>), C<CvPADLIST> slot is reused for a different internal purpose in XSUBs. The PADLIST has a C array where pads are stored. The 0th entry of the PADLIST is a PADNAMELIST which represents the "names" or rather the "static type information" for lexicals. The individual elements of a PADNAMELIST are PADNAMEs. Future refactorings might stop the PADNAMELIST from being stored in the PADLIST's array, so don't rely on it. See L</PadlistNAMES>. The CvDEPTH'th entry of a PADLIST is a PAD (an AV) which is the stack frame at that depth of recursion into the CV. The 0th slot of a frame AV is an AV which is C<@_>. Other entries are storage for variables and op targets. Iterating over the PADNAMELIST iterates over all possible pad items. Pad slots for targets (C<SVs_PADTMP>) and GVs end up having &PL_padname_undef "names", while slots for constants have C<&PL_padname_const> "names" (see C<L</pad_alloc>>). That C<&PL_padname_undef> and C<&PL_padname_const> are used is an implementation detail subject to change. To test for them, use C<!PadnamePV(name)> and S<C<PadnamePV(name) && !PadnameLEN(name)>>, respectively. Only C<my>/C<our> variable slots get valid names. The rest are op targets/GVs/constants which are statically allocated or resolved at compile time. These don't have names by which they can be looked up from Perl code at run time through eval"" the way C<my>/C<our> variables can be. Since they can't be looked up by "name" but only by their index allocated at compile time (which is usually in C<< PL_op->op_targ >>), wasting a name SV for them doesn't make sense. The pad names in the PADNAMELIST have their PV holding the name of the variable. The C<COP_SEQ_RANGE_LOW> and C<_HIGH> fields form a range (low+1..high inclusive) of cop_seq numbers for which the name is valid. During compilation, these fields may hold the special value PERL_PADSEQ_INTRO to indicate various stages: COP_SEQ_RANGE_LOW _HIGH ----------------- ----- PERL_PADSEQ_INTRO 0 variable not yet introduced: { my ($x valid-seq# PERL_PADSEQ_INTRO variable in scope: { my ($x); valid-seq# valid-seq# compilation of scope complete: { my ($x); .... } When a lexical var hasn't yet been introduced, it already exists from the perspective of duplicate declarations, but not for variable lookups, e.g. my ($x, $x); # '"my" variable $x masks earlier declaration' my $x = $x; # equal to my $x = $::x; For typed lexicals C<PadnameTYPE> points at the type stash. For C<our> lexicals, C<PadnameOURSTASH> points at the stash of the associated global (so that duplicate C<our> declarations in the same package can be detected). C<PadnameGEN> is sometimes used to store the generation number during compilation. If C<PadnameOUTER> is set on the pad name, then that slot in the frame AV is a REFCNT'ed reference to a lexical from "outside". Such entries are sometimes referred to as 'fake'. In this case, the name does not use 'low' and 'high' to store a cop_seq range, since it is in scope throughout. Instead 'high' stores some flags containing info about the real lexical (is it declared in an anon, and is it capable of being instantiated multiple times?), and for fake ANONs, 'low' contains the index within the parent's pad where the lexical's value is stored, to make cloning quicker. If the 'name' is C<&> the corresponding entry in the PAD is a CV representing a possible closure. Note that formats are treated as anon subs, and are cloned each time write is called (if necessary). The flag C<SVs_PADSTALE> is cleared on lexicals each time the C<my()> is executed, and set on scope exit. This allows the C<"Variable $x is not available"> warning to be generated in evals, such as { my $x = 1; sub f { eval '$x'} } f(); For state vars, C<SVs_PADSTALE> is overloaded to mean 'not yet initialised', but this internal state is stored in a separate pad entry. PADLIST * CvPADLIST(CV *cv) =for hackers Found in file pad.c =item pad_add_name_pvs X<pad_add_name_pvs> Exactly like L</pad_add_name_pvn>, but takes a literal string instead of a string/length pair. PADOFFSET pad_add_name_pvs("name", U32 flags, HV *typestash, HV *ourstash) =for hackers Found in file pad.h =item PadARRAY X<PadARRAY> NOTE: this function is experimental and may change or be removed without notice. The C array of pad entries. SV ** PadARRAY(PAD * pad) =for hackers Found in file pad.h =item pad_findmy_pvs X<pad_findmy_pvs> Exactly like L</pad_findmy_pvn>, but takes a literal string instead of a string/length pair. PADOFFSET pad_findmy_pvs("name", U32 flags) =for hackers Found in file pad.h =item PadlistARRAY X<PadlistARRAY> NOTE: this function is experimental and may change or be removed without notice. The C array of a padlist, containing the pads. Only subscript it with numbers >= 1, as the 0th entry is not guaranteed to remain usable. PAD ** PadlistARRAY(PADLIST * padlist) =for hackers Found in file pad.h =item PadlistMAX X<PadlistMAX> NOTE: this function is experimental and may change or be removed without notice. The index of the last allocated space in the padlist. Note that the last pad may be in an earlier slot. Any entries following it will be C<NULL> in that case. SSize_t PadlistMAX(PADLIST * padlist) =for hackers Found in file pad.h =item PadlistNAMES X<PadlistNAMES> NOTE: this function is experimental and may change or be removed without notice. The names associated with pad entries. PADNAMELIST * PadlistNAMES(PADLIST * padlist) =for hackers Found in file pad.h =item PadlistNAMESARRAY X<PadlistNAMESARRAY> NOTE: this function is experimental and may change or be removed without notice. The C array of pad names. PADNAME ** PadlistNAMESARRAY(PADLIST * padlist) =for hackers Found in file pad.h =item PadlistNAMESMAX X<PadlistNAMESMAX> NOTE: this function is experimental and may change or be removed without notice. The index of the last pad name. SSize_t PadlistNAMESMAX(PADLIST * padlist) =for hackers Found in file pad.h =item PadlistREFCNT X<PadlistREFCNT> NOTE: this function is experimental and may change or be removed without notice. The reference count of the padlist. Currently this is always 1. U32 PadlistREFCNT(PADLIST * padlist) =for hackers Found in file pad.h =item PadMAX X<PadMAX> NOTE: this function is experimental and may change or be removed without notice. The index of the last pad entry. SSize_t PadMAX(PAD * pad) =for hackers Found in file pad.h =item PadnameLEN X<PadnameLEN> NOTE: this function is experimental and may change or be removed without notice. The length of the name. STRLEN PadnameLEN(PADNAME * pn) =for hackers Found in file pad.h =item PadnamelistARRAY X<PadnamelistARRAY> NOTE: this function is experimental and may change or be removed without notice. The C array of pad names. PADNAME ** PadnamelistARRAY(PADNAMELIST * pnl) =for hackers Found in file pad.h =item PadnamelistMAX X<PadnamelistMAX> NOTE: this function is experimental and may change or be removed without notice. The index of the last pad name. SSize_t PadnamelistMAX(PADNAMELIST * pnl) =for hackers Found in file pad.h =item PadnamelistREFCNT X<PadnamelistREFCNT> NOTE: this function is experimental and may change or be removed without notice. The reference count of the pad name list. SSize_t PadnamelistREFCNT(PADNAMELIST * pnl) =for hackers Found in file pad.h =item PadnamelistREFCNT_dec X<PadnamelistREFCNT_dec> NOTE: this function is experimental and may change or be removed without notice. Lowers the reference count of the pad name list. void PadnamelistREFCNT_dec(PADNAMELIST * pnl) =for hackers Found in file pad.h =item PadnamePV X<PadnamePV> NOTE: this function is experimental and may change or be removed without notice. The name stored in the pad name struct. This returns C<NULL> for a target slot. char * PadnamePV(PADNAME * pn) =for hackers Found in file pad.h =item PadnameREFCNT X<PadnameREFCNT> NOTE: this function is experimental and may change or be removed without notice. The reference count of the pad name. SSize_t PadnameREFCNT(PADNAME * pn) =for hackers Found in file pad.h =item PadnameREFCNT_dec X<PadnameREFCNT_dec> NOTE: this function is experimental and may change or be removed without notice. Lowers the reference count of the pad name. void PadnameREFCNT_dec(PADNAME * pn) =for hackers Found in file pad.h =item PadnameSV X<PadnameSV> NOTE: this function is experimental and may change or be removed without notice. Returns the pad name as a mortal SV. SV * PadnameSV(PADNAME * pn) =for hackers Found in file pad.h =item PadnameUTF8 X<PadnameUTF8> NOTE: this function is experimental and may change or be removed without notice. Whether PadnamePV is in UTF-8. Currently, this is always true. bool PadnameUTF8(PADNAME * pn) =for hackers Found in file pad.h =item pad_new X<pad_new> Create a new padlist, updating the global variables for the currently-compiling padlist to point to the new padlist. The following flags can be OR'ed together: padnew_CLONE this pad is for a cloned CV padnew_SAVE save old globals on the save stack padnew_SAVESUB also save extra stuff for start of sub PADLIST* pad_new(int flags) =for hackers Found in file pad.c =item PL_comppad X<PL_comppad> NOTE: this function is experimental and may change or be removed without notice. During compilation, this points to the array containing the values part of the pad for the currently-compiling code. (At runtime a CV may have many such value arrays; at compile time just one is constructed.) At runtime, this points to the array containing the currently-relevant values for the pad for the currently-executing code. =for hackers Found in file pad.c =item PL_comppad_name X<PL_comppad_name> NOTE: this function is experimental and may change or be removed without notice. During compilation, this points to the array containing the names part of the pad for the currently-compiling code. =for hackers Found in file pad.c =item PL_curpad X<PL_curpad> NOTE: this function is experimental and may change or be removed without notice. Points directly to the body of the L</PL_comppad> array. (I.e., this is C<PadARRAY(PL_comppad)>.) =for hackers Found in file pad.c =back =head1 Per-Interpreter Variables =over 8 =item PL_curcop X<PL_curcop> The currently active COP (control op) roughly representing the current statement in the source. COP* PL_curcop =for hackers Found in file intrpvar.h =item PL_curstash X<PL_curstash> The stash for the package code will be compiled into. HV* PL_curstash =for hackers Found in file intrpvar.h =item PL_defgv X<PL_defgv> The GV representing C<*_>. Useful for access to C<$_>. GV * PL_defgv =for hackers Found in file intrpvar.h =item PL_exit_flags X<PL_exit_flags> Contains flags controlling perl's behaviour on exit(): =over =item * C<PERL_EXIT_DESTRUCT_END> If set, END blocks are executed when the interpreter is destroyed. This is normally set by perl itself after the interpreter is constructed. =item * C<PERL_EXIT_ABORT> Call C<abort()> on exit. This is used internally by perl itself to abort if exit is called while processing exit. =item * C<PERL_EXIT_WARN> Warn on exit. =item * C<PERL_EXIT_EXPECTED> Set by the L<perlfunc/exit> operator. =back U8 PL_exit_flags =for hackers Found in file intrpvar.h =item PL_modglobal X<PL_modglobal> C<PL_modglobal> is a general purpose, interpreter global HV for use by extensions that need to keep information on a per-interpreter basis. In a pinch, it can also be used as a symbol table for extensions to share data among each other. It is a good idea to use keys prefixed by the package name of the extension that owns the data. HV* PL_modglobal =for hackers Found in file intrpvar.h =item PL_na X<PL_na> A convenience variable which is typically used with C<SvPV> when one doesn't care about the length of the string. It is usually more efficient to either declare a local variable and use that instead or to use the C<SvPV_nolen> macro. STRLEN PL_na =for hackers Found in file intrpvar.h =item PL_opfreehook X<PL_opfreehook> When non-C<NULL>, the function pointed by this variable will be called each time an OP is freed with the corresponding OP as the argument. This allows extensions to free any extra attribute they have locally attached to an OP. It is also assured to first fire for the parent OP and then for its kids. When you replace this variable, it is considered a good practice to store the possibly previously installed hook and that you recall it inside your own. Perl_ophook_t PL_opfreehook =for hackers Found in file intrpvar.h =item PL_peepp X<PL_peepp> Pointer to the per-subroutine peephole optimiser. This is a function that gets called at the end of compilation of a Perl subroutine (or equivalently independent piece of Perl code) to perform fixups of some ops and to perform small-scale optimisations. The function is called once for each subroutine that is compiled, and is passed, as sole parameter, a pointer to the op that is the entry point to the subroutine. It modifies the op tree in place. The peephole optimiser should never be completely replaced. Rather, add code to it by wrapping the existing optimiser. The basic way to do this can be seen in L<perlguts/Compile pass 3: peephole optimization>. If the new code wishes to operate on ops throughout the subroutine's structure, rather than just at the top level, it is likely to be more convenient to wrap the L</PL_rpeepp> hook. peep_t PL_peepp =for hackers Found in file intrpvar.h =item PL_perl_destruct_level X<PL_perl_destruct_level> This value may be set when embedding for full cleanup. Possible values: =over =item * 0 - none =item * 1 - full =item * 2 or greater - full with checks. =back If C<$ENV{PERL_DESTRUCT_LEVEL}> is set to an integer greater than the value of C<PL_perl_destruct_level> its value is used instead. signed char PL_perl_destruct_level =for hackers Found in file intrpvar.h =item PL_rpeepp X<PL_rpeepp> Pointer to the recursive peephole optimiser. This is a function that gets called at the end of compilation of a Perl subroutine (or equivalently independent piece of Perl code) to perform fixups of some ops and to perform small-scale optimisations. The function is called once for each chain of ops linked through their C<op_next> fields; it is recursively called to handle each side chain. It is passed, as sole parameter, a pointer to the op that is at the head of the chain. It modifies the op tree in place. The peephole optimiser should never be completely replaced. Rather, add code to it by wrapping the existing optimiser. The basic way to do this can be seen in L<perlguts/Compile pass 3: peephole optimization>. If the new code wishes to operate only on ops at a subroutine's top level, rather than throughout the structure, it is likely to be more convenient to wrap the L</PL_peepp> hook. peep_t PL_rpeepp =for hackers Found in file intrpvar.h =item PL_runops X<PL_runops> See L<perlguts/Pluggable runops>. runops_proc_t PL_runops =for hackers Found in file intrpvar.h =item PL_sv_no X<PL_sv_no> This is the C<false> SV. See C<L</PL_sv_yes>>. Always refer to this as C<&PL_sv_no>. SV PL_sv_no =for hackers Found in file intrpvar.h =item PL_sv_undef X<PL_sv_undef> This is the C<undef> SV. Always refer to this as C<&PL_sv_undef>. SV PL_sv_undef =for hackers Found in file intrpvar.h =item PL_sv_yes X<PL_sv_yes> This is the C<true> SV. See C<L</PL_sv_no>>. Always refer to this as C<&PL_sv_yes>. SV PL_sv_yes =for hackers Found in file intrpvar.h =item PL_sv_zero X<PL_sv_zero> This readonly SV has a zero numeric value and a C<"0"> string value. It's similar to C<L</PL_sv_no>> except for its string value. Can be used as a cheap alternative to C<mXPUSHi(0)> for example. Always refer to this as C<&PL_sv_zero>. Introduced in 5.28. SV PL_sv_zero =for hackers Found in file intrpvar.h =back =head1 REGEXP Functions =over 8 =item SvRX X<SvRX> Convenience macro to get the REGEXP from a SV. This is approximately equivalent to the following snippet: if (SvMAGICAL(sv)) mg_get(sv); if (SvROK(sv)) sv = MUTABLE_SV(SvRV(sv)); if (SvTYPE(sv) == SVt_REGEXP) return (REGEXP*) sv; C<NULL> will be returned if a REGEXP* is not found. REGEXP * SvRX(SV *sv) =for hackers Found in file regexp.h =item SvRXOK X<SvRXOK> Returns a boolean indicating whether the SV (or the one it references) is a REGEXP. If you want to do something with the REGEXP* later use SvRX instead and check for NULL. bool SvRXOK(SV* sv) =for hackers Found in file regexp.h =back =head1 Stack Manipulation Macros =over 8 =item dMARK X<dMARK> Declare a stack marker variable, C<mark>, for the XSUB. See C<L</MARK>> and C<L</dORIGMARK>>. dMARK; =for hackers Found in file pp.h =item dORIGMARK X<dORIGMARK> Saves the original stack mark for the XSUB. See C<L</ORIGMARK>>. dORIGMARK; =for hackers Found in file pp.h =item dSP X<dSP> Declares a local copy of perl's stack pointer for the XSUB, available via the C<SP> macro. See C<L</SP>>. dSP; =for hackers Found in file pp.h =item EXTEND X<EXTEND> Used to extend the argument stack for an XSUB's return values. Once used, guarantees that there is room for at least C<nitems> to be pushed onto the stack. void EXTEND(SP, SSize_t nitems) =for hackers Found in file pp.h =item MARK X<MARK> Stack marker variable for the XSUB. See C<L</dMARK>>. =for hackers Found in file pp.h =item mPUSHi X<mPUSHi> Push an integer onto the stack. The stack must have room for this element. Does not use C<TARG>. See also C<L</PUSHi>>, C<L</mXPUSHi>> and C<L</XPUSHi>>. void mPUSHi(IV iv) =for hackers Found in file pp.h =item mPUSHn X<mPUSHn> Push a double onto the stack. The stack must have room for this element. Does not use C<TARG>. See also C<L</PUSHn>>, C<L</mXPUSHn>> and C<L</XPUSHn>>. void mPUSHn(NV nv) =for hackers Found in file pp.h =item mPUSHp X<mPUSHp> Push a string onto the stack. The stack must have room for this element. The C<len> indicates the length of the string. Does not use C<TARG>. See also C<L</PUSHp>>, C<L</mXPUSHp>> and C<L</XPUSHp>>. void mPUSHp(char* str, STRLEN len) =for hackers Found in file pp.h =item mPUSHs X<mPUSHs> Push an SV onto the stack and mortalizes the SV. The stack must have room for this element. Does not use C<TARG>. See also C<L</PUSHs>> and C<L</mXPUSHs>>. void mPUSHs(SV* sv) =for hackers Found in file pp.h =item mPUSHu X<mPUSHu> Push an unsigned integer onto the stack. The stack must have room for this element. Does not use C<TARG>. See also C<L</PUSHu>>, C<L</mXPUSHu>> and C<L</XPUSHu>>. void mPUSHu(UV uv) =for hackers Found in file pp.h =item mXPUSHi X<mXPUSHi> Push an integer onto the stack, extending the stack if necessary. Does not use C<TARG>. See also C<L</XPUSHi>>, C<L</mPUSHi>> and C<L</PUSHi>>. void mXPUSHi(IV iv) =for hackers Found in file pp.h =item mXPUSHn X<mXPUSHn> Push a double onto the stack, extending the stack if necessary. Does not use C<TARG>. See also C<L</XPUSHn>>, C<L</mPUSHn>> and C<L</PUSHn>>. void mXPUSHn(NV nv) =for hackers Found in file pp.h =item mXPUSHp X<mXPUSHp> Push a string onto the stack, extending the stack if necessary. The C<len> indicates the length of the string. Does not use C<TARG>. See also C<L</XPUSHp>>, C<mPUSHp> and C<PUSHp>. void mXPUSHp(char* str, STRLEN len) =for hackers Found in file pp.h =item mXPUSHs X<mXPUSHs> Push an SV onto the stack, extending the stack if necessary and mortalizes the SV. Does not use C<TARG>. See also C<L</XPUSHs>> and C<L</mPUSHs>>. void mXPUSHs(SV* sv) =for hackers Found in file pp.h =item mXPUSHu X<mXPUSHu> Push an unsigned integer onto the stack, extending the stack if necessary. Does not use C<TARG>. See also C<L</XPUSHu>>, C<L</mPUSHu>> and C<L</PUSHu>>. void mXPUSHu(UV uv) =for hackers Found in file pp.h =item ORIGMARK X<ORIGMARK> The original stack mark for the XSUB. See C<L</dORIGMARK>>. =for hackers Found in file pp.h =item POPi X<POPi> Pops an integer off the stack. IV POPi =for hackers Found in file pp.h =item POPl X<POPl> Pops a long off the stack. long POPl =for hackers Found in file pp.h =item POPn X<POPn> Pops a double off the stack. NV POPn =for hackers Found in file pp.h =item POPp X<POPp> Pops a string off the stack. char* POPp =for hackers Found in file pp.h =item POPpbytex X<POPpbytex> Pops a string off the stack which must consist of bytes i.e. characters < 256. char* POPpbytex =for hackers Found in file pp.h =item POPpx X<POPpx> Pops a string off the stack. Identical to POPp. There are two names for historical reasons. char* POPpx =for hackers Found in file pp.h =item POPs X<POPs> Pops an SV off the stack. SV* POPs =for hackers Found in file pp.h =item POPu X<POPu> Pops an unsigned integer off the stack. UV POPu =for hackers Found in file pp.h =item POPul X<POPul> Pops an unsigned long off the stack. long POPul =for hackers Found in file pp.h =item PUSHi X<PUSHi> Push an integer onto the stack. The stack must have room for this element. Handles 'set' magic. Uses C<TARG>, so C<dTARGET> or C<dXSTARG> should be called to declare it. Do not call multiple C<TARG>-oriented macros to return lists from XSUB's - see C<L</mPUSHi>> instead. See also C<L</XPUSHi>> and C<L</mXPUSHi>>. void PUSHi(IV iv) =for hackers Found in file pp.h =item PUSHMARK X<PUSHMARK> Opening bracket for arguments on a callback. See C<L</PUTBACK>> and L<perlcall>. void PUSHMARK(SP) =for hackers Found in file pp.h =item PUSHmortal X<PUSHmortal> Push a new mortal SV onto the stack. The stack must have room for this element. Does not use C<TARG>. See also C<L</PUSHs>>, C<L</XPUSHmortal>> and C<L</XPUSHs>>. void PUSHmortal =for hackers Found in file pp.h =item PUSHn X<PUSHn> Push a double onto the stack. The stack must have room for this element. Handles 'set' magic. Uses C<TARG>, so C<dTARGET> or C<dXSTARG> should be called to declare it. Do not call multiple C<TARG>-oriented macros to return lists from XSUB's - see C<L</mPUSHn>> instead. See also C<L</XPUSHn>> and C<L</mXPUSHn>>. void PUSHn(NV nv) =for hackers Found in file pp.h =item PUSHp X<PUSHp> Push a string onto the stack. The stack must have room for this element. The C<len> indicates the length of the string. Handles 'set' magic. Uses C<TARG>, so C<dTARGET> or C<dXSTARG> should be called to declare it. Do not call multiple C<TARG>-oriented macros to return lists from XSUB's - see C<L</mPUSHp>> instead. See also C<L</XPUSHp>> and C<L</mXPUSHp>>. void PUSHp(char* str, STRLEN len) =for hackers Found in file pp.h =item PUSHs X<PUSHs> Push an SV onto the stack. The stack must have room for this element. Does not handle 'set' magic. Does not use C<TARG>. See also C<L</PUSHmortal>>, C<L</XPUSHs>>, and C<L</XPUSHmortal>>. void PUSHs(SV* sv) =for hackers Found in file pp.h =item PUSHu X<PUSHu> Push an unsigned integer onto the stack. The stack must have room for this element. Handles 'set' magic. Uses C<TARG>, so C<dTARGET> or C<dXSTARG> should be called to declare it. Do not call multiple C<TARG>-oriented macros to return lists from XSUB's - see C<L</mPUSHu>> instead. See also C<L</XPUSHu>> and C<L</mXPUSHu>>. void PUSHu(UV uv) =for hackers Found in file pp.h =item PUTBACK X<PUTBACK> Closing bracket for XSUB arguments. This is usually handled by C<xsubpp>. See C<L</PUSHMARK>> and L<perlcall> for other uses. PUTBACK; =for hackers Found in file pp.h =item SP X<SP> Stack pointer. This is usually handled by C<xsubpp>. See C<L</dSP>> and C<SPAGAIN>. =for hackers Found in file pp.h =item SPAGAIN X<SPAGAIN> Refetch the stack pointer. Used after a callback. See L<perlcall>. SPAGAIN; =for hackers Found in file pp.h =item XPUSHi X<XPUSHi> Push an integer onto the stack, extending the stack if necessary. Handles 'set' magic. Uses C<TARG>, so C<dTARGET> or C<dXSTARG> should be called to declare it. Do not call multiple C<TARG>-oriented macros to return lists from XSUB's - see C<L</mXPUSHi>> instead. See also C<L</PUSHi>> and C<L</mPUSHi>>. void XPUSHi(IV iv) =for hackers Found in file pp.h =item XPUSHmortal X<XPUSHmortal> Push a new mortal SV onto the stack, extending the stack if necessary. Does not use C<TARG>. See also C<L</XPUSHs>>, C<L</PUSHmortal>> and C<L</PUSHs>>. void XPUSHmortal =for hackers Found in file pp.h =item XPUSHn X<XPUSHn> Push a double onto the stack, extending the stack if necessary. Handles 'set' magic. Uses C<TARG>, so C<dTARGET> or C<dXSTARG> should be called to declare it. Do not call multiple C<TARG>-oriented macros to return lists from XSUB's - see C<L</mXPUSHn>> instead. See also C<L</PUSHn>> and C<L</mPUSHn>>. void XPUSHn(NV nv) =for hackers Found in file pp.h =item XPUSHp X<XPUSHp> Push a string onto the stack, extending the stack if necessary. The C<len> indicates the length of the string. Handles 'set' magic. Uses C<TARG>, so C<dTARGET> or C<dXSTARG> should be called to declare it. Do not call multiple C<TARG>-oriented macros to return lists from XSUB's - see C<L</mXPUSHp>> instead. See also C<L</PUSHp>> and C<L</mPUSHp>>. void XPUSHp(char* str, STRLEN len) =for hackers Found in file pp.h =item XPUSHs X<XPUSHs> Push an SV onto the stack, extending the stack if necessary. Does not handle 'set' magic. Does not use C<TARG>. See also C<L</XPUSHmortal>>, C<PUSHs> and C<PUSHmortal>. void XPUSHs(SV* sv) =for hackers Found in file pp.h =item XPUSHu X<XPUSHu> Push an unsigned integer onto the stack, extending the stack if necessary. Handles 'set' magic. Uses C<TARG>, so C<dTARGET> or C<dXSTARG> should be called to declare it. Do not call multiple C<TARG>-oriented macros to return lists from XSUB's - see C<L</mXPUSHu>> instead. See also C<L</PUSHu>> and C<L</mPUSHu>>. void XPUSHu(UV uv) =for hackers Found in file pp.h =item XSRETURN X<XSRETURN> Return from XSUB, indicating number of items on the stack. This is usually handled by C<xsubpp>. void XSRETURN(int nitems) =for hackers Found in file XSUB.h =item XSRETURN_EMPTY X<XSRETURN_EMPTY> Return an empty list from an XSUB immediately. XSRETURN_EMPTY; =for hackers Found in file XSUB.h =item XSRETURN_IV X<XSRETURN_IV> Return an integer from an XSUB immediately. Uses C<XST_mIV>. void XSRETURN_IV(IV iv) =for hackers Found in file XSUB.h =item XSRETURN_NO X<XSRETURN_NO> Return C<&PL_sv_no> from an XSUB immediately. Uses C<XST_mNO>. XSRETURN_NO; =for hackers Found in file XSUB.h =item XSRETURN_NV X<XSRETURN_NV> Return a double from an XSUB immediately. Uses C<XST_mNV>. void XSRETURN_NV(NV nv) =for hackers Found in file XSUB.h =item XSRETURN_PV X<XSRETURN_PV> Return a copy of a string from an XSUB immediately. Uses C<XST_mPV>. void XSRETURN_PV(char* str) =for hackers Found in file XSUB.h =item XSRETURN_UNDEF X<XSRETURN_UNDEF> Return C<&PL_sv_undef> from an XSUB immediately. Uses C<XST_mUNDEF>. XSRETURN_UNDEF; =for hackers Found in file XSUB.h =item XSRETURN_UV X<XSRETURN_UV> Return an integer from an XSUB immediately. Uses C<XST_mUV>. void XSRETURN_UV(IV uv) =for hackers Found in file XSUB.h =item XSRETURN_YES X<XSRETURN_YES> Return C<&PL_sv_yes> from an XSUB immediately. Uses C<XST_mYES>. XSRETURN_YES; =for hackers Found in file XSUB.h =item XST_mIV X<XST_mIV> Place an integer into the specified position C<pos> on the stack. The value is stored in a new mortal SV. void XST_mIV(int pos, IV iv) =for hackers Found in file XSUB.h =item XST_mNO X<XST_mNO> Place C<&PL_sv_no> into the specified position C<pos> on the stack. void XST_mNO(int pos) =for hackers Found in file XSUB.h =item XST_mNV X<XST_mNV> Place a double into the specified position C<pos> on the stack. The value is stored in a new mortal SV. void XST_mNV(int pos, NV nv) =for hackers Found in file XSUB.h =item XST_mPV X<XST_mPV> Place a copy of a string into the specified position C<pos> on the stack. The value is stored in a new mortal SV. void XST_mPV(int pos, char* str) =for hackers Found in file XSUB.h =item XST_mUNDEF X<XST_mUNDEF> Place C<&PL_sv_undef> into the specified position C<pos> on the stack. void XST_mUNDEF(int pos) =for hackers Found in file XSUB.h =item XST_mUV X<XST_mUV> Place an unsigned integer into the specified position C<pos> on the stack. The value is stored in a new mortal SV. void XST_mUV(int pos, UV uv) =for hackers Found in file XSUB.h =item XST_mYES X<XST_mYES> Place C<&PL_sv_yes> into the specified position C<pos> on the stack. void XST_mYES(int pos) =for hackers Found in file XSUB.h =back =head1 SV Flags =over 8 =item SVt_IV X<SVt_IV> Type flag for scalars. See L</svtype>. =for hackers Found in file sv.h =item SVt_NULL X<SVt_NULL> Type flag for scalars. See L</svtype>. =for hackers Found in file sv.h =item SVt_NV X<SVt_NV> Type flag for scalars. See L</svtype>. =for hackers Found in file sv.h =item SVt_PV X<SVt_PV> Type flag for scalars. See L</svtype>. =for hackers Found in file sv.h =item SVt_PVAV X<SVt_PVAV> Type flag for arrays. See L</svtype>. =for hackers Found in file sv.h =item SVt_PVCV X<SVt_PVCV> Type flag for subroutines. See L</svtype>. =for hackers Found in file sv.h =item SVt_PVFM X<SVt_PVFM> Type flag for formats. See L</svtype>. =for hackers Found in file sv.h =item SVt_PVGV X<SVt_PVGV> Type flag for typeglobs. See L</svtype>. =for hackers Found in file sv.h =item SVt_PVHV X<SVt_PVHV> Type flag for hashes. See L</svtype>. =for hackers Found in file sv.h =item SVt_PVIO X<SVt_PVIO> Type flag for I/O objects. See L</svtype>. =for hackers Found in file sv.h =item SVt_PVIV X<SVt_PVIV> Type flag for scalars. See L</svtype>. =for hackers Found in file sv.h =item SVt_PVLV X<SVt_PVLV> Type flag for scalars. See L</svtype>. =for hackers Found in file sv.h =item SVt_PVMG X<SVt_PVMG> Type flag for scalars. See L</svtype>. =for hackers Found in file sv.h =item SVt_PVNV X<SVt_PVNV> Type flag for scalars. See L</svtype>. =for hackers Found in file sv.h =item SVt_REGEXP X<SVt_REGEXP> Type flag for regular expressions. See L</svtype>. =for hackers Found in file sv.h =item svtype X<svtype> An enum of flags for Perl types. These are found in the file F<sv.h> in the C<svtype> enum. Test these flags with the C<SvTYPE> macro. The types are: SVt_NULL SVt_IV SVt_NV SVt_RV SVt_PV SVt_PVIV SVt_PVNV SVt_PVMG SVt_INVLIST SVt_REGEXP SVt_PVGV SVt_PVLV SVt_PVAV SVt_PVHV SVt_PVCV SVt_PVFM SVt_PVIO These are most easily explained from the bottom up. C<SVt_PVIO> is for I/O objects, C<SVt_PVFM> for formats, C<SVt_PVCV> for subroutines, C<SVt_PVHV> for hashes and C<SVt_PVAV> for arrays. All the others are scalar types, that is, things that can be bound to a C<$> variable. For these, the internal types are mostly orthogonal to types in the Perl language. Hence, checking C<< SvTYPE(sv) < SVt_PVAV >> is the best way to see whether something is a scalar. C<SVt_PVGV> represents a typeglob. If C<!SvFAKE(sv)>, then it is a real, incoercible typeglob. If C<SvFAKE(sv)>, then it is a scalar to which a typeglob has been assigned. Assigning to it again will stop it from being a typeglob. C<SVt_PVLV> represents a scalar that delegates to another scalar behind the scenes. It is used, e.g., for the return value of C<substr> and for tied hash and array elements. It can hold any scalar value, including a typeglob. C<SVt_REGEXP> is for regular expressions. C<SVt_INVLIST> is for Perl core internal use only. C<SVt_PVMG> represents a "normal" scalar (not a typeglob, regular expression, or delegate). Since most scalars do not need all the internal fields of a PVMG, we save memory by allocating smaller structs when possible. All the other types are just simpler forms of C<SVt_PVMG>, with fewer internal fields. C<SVt_NULL> can only hold undef. C<SVt_IV> can hold undef, an integer, or a reference. (C<SVt_RV> is an alias for C<SVt_IV>, which exists for backward compatibility.) C<SVt_NV> can hold any of those or a double. C<SVt_PV> can only hold C<undef> or a string. C<SVt_PVIV> is a superset of C<SVt_PV> and C<SVt_IV>. C<SVt_PVNV> is similar. C<SVt_PVMG> can hold anything C<SVt_PVNV> can hold, but it can, but does not have to, be blessed or magical. =for hackers Found in file sv.h =back =head1 SV Manipulation Functions =over 8 =item boolSV X<boolSV> Returns a true SV if C<b> is a true value, or a false SV if C<b> is 0. See also C<L</PL_sv_yes>> and C<L</PL_sv_no>>. SV * boolSV(bool b) =for hackers Found in file sv.h =item croak_xs_usage X<croak_xs_usage> A specialised variant of C<croak()> for emitting the usage message for xsubs croak_xs_usage(cv, "eee_yow"); works out the package name and subroutine name from C<cv>, and then calls C<croak()>. Hence if C<cv> is C<&ouch::awk>, it would call C<croak> as: Perl_croak(aTHX_ "Usage: %" SVf "::%" SVf "(%s)", "ouch" "awk", "eee_yow"); void croak_xs_usage(const CV *const cv, const char *const params) =for hackers Found in file universal.c =item get_sv X<get_sv> Returns the SV of the specified Perl scalar. C<flags> are passed to C<gv_fetchpv>. If C<GV_ADD> is set and the Perl variable does not exist then it will be created. If C<flags> is zero and the variable does not exist then NULL is returned. NOTE: the perl_ form of this function is deprecated. SV* get_sv(const char *name, I32 flags) =for hackers Found in file perl.c =item looks_like_number X<looks_like_number> Test if the content of an SV looks like a number (or is a number). C<Inf> and C<Infinity> are treated as numbers (so will not issue a non-numeric warning), even if your C<atof()> doesn't grok them. Get-magic is ignored. I32 looks_like_number(SV *const sv) =for hackers Found in file sv.c =item newRV_inc X<newRV_inc> Creates an RV wrapper for an SV. The reference count for the original SV is incremented. SV* newRV_inc(SV* sv) =for hackers Found in file sv.h =item newRV_noinc X<newRV_noinc> Creates an RV wrapper for an SV. The reference count for the original SV is B<not> incremented. SV* newRV_noinc(SV *const tmpRef) =for hackers Found in file sv.c =item newSV X<newSV> Creates a new SV. A non-zero C<len> parameter indicates the number of bytes of preallocated string space the SV should have. An extra byte for a trailing C<NUL> is also reserved. (C<SvPOK> is not set for the SV even if string space is allocated.) The reference count for the new SV is set to 1. In 5.9.3, C<newSV()> replaces the older C<NEWSV()> API, and drops the first parameter, I<x>, a debug aid which allowed callers to identify themselves. This aid has been superseded by a new build option, C<PERL_MEM_LOG> (see L<perlhacktips/PERL_MEM_LOG>). The older API is still there for use in XS modules supporting older perls. SV* newSV(const STRLEN len) =for hackers Found in file sv.c =item newSVhek X<newSVhek> Creates a new SV from the hash key structure. It will generate scalars that point to the shared string table where possible. Returns a new (undefined) SV if C<hek> is NULL. SV* newSVhek(const HEK *const hek) =for hackers Found in file sv.c =item newSViv X<newSViv> Creates a new SV and copies an integer into it. The reference count for the SV is set to 1. SV* newSViv(const IV i) =for hackers Found in file sv.c =item newSVnv X<newSVnv> Creates a new SV and copies a floating point value into it. The reference count for the SV is set to 1. SV* newSVnv(const NV n) =for hackers Found in file sv.c =item newSVpadname X<newSVpadname> NOTE: this function is experimental and may change or be removed without notice. Creates a new SV containing the pad name. SV* newSVpadname(PADNAME *pn) =for hackers Found in file sv.h =item newSVpv X<newSVpv> Creates a new SV and copies a string (which may contain C<NUL> (C<\0>) characters) into it. The reference count for the SV is set to 1. If C<len> is zero, Perl will compute the length using C<strlen()>, (which means if you use this option, that C<s> can't have embedded C<NUL> characters and has to have a terminating C<NUL> byte). This function can cause reliability issues if you are likely to pass in empty strings that are not null terminated, because it will run strlen on the string and potentially run past valid memory. Using L</newSVpvn> is a safer alternative for non C<NUL> terminated strings. For string literals use L</newSVpvs> instead. This function will work fine for C<NUL> terminated strings, but if you want to avoid the if statement on whether to call C<strlen> use C<newSVpvn> instead (calling C<strlen> yourself). SV* newSVpv(const char *const s, const STRLEN len) =for hackers Found in file sv.c =item newSVpvf X<newSVpvf> Creates a new SV and initializes it with the string formatted like C<sv_catpvf>. SV* newSVpvf(const char *const pat, ...) =for hackers Found in file sv.c =item newSVpvn X<newSVpvn> Creates a new SV and copies a string into it, which may contain C<NUL> characters (C<\0>) and other binary data. The reference count for the SV is set to 1. Note that if C<len> is zero, Perl will create a zero length (Perl) string. You are responsible for ensuring that the source buffer is at least C<len> bytes long. If the C<buffer> argument is NULL the new SV will be undefined. SV* newSVpvn(const char *const buffer, const STRLEN len) =for hackers Found in file sv.c =item newSVpvn_flags X<newSVpvn_flags> Creates a new SV and copies a string (which may contain C<NUL> (C<\0>) characters) into it. The reference count for the SV is set to 1. Note that if C<len> is zero, Perl will create a zero length string. You are responsible for ensuring that the source string is at least C<len> bytes long. If the C<s> argument is NULL the new SV will be undefined. Currently the only flag bits accepted are C<SVf_UTF8> and C<SVs_TEMP>. If C<SVs_TEMP> is set, then C<sv_2mortal()> is called on the result before returning. If C<SVf_UTF8> is set, C<s> is considered to be in UTF-8 and the C<SVf_UTF8> flag will be set on the new SV. C<newSVpvn_utf8()> is a convenience wrapper for this function, defined as #define newSVpvn_utf8(s, len, u) \ newSVpvn_flags((s), (len), (u) ? SVf_UTF8 : 0) SV* newSVpvn_flags(const char *const s, const STRLEN len, const U32 flags) =for hackers Found in file sv.c =item newSVpvn_share X<newSVpvn_share> Creates a new SV with its C<SvPVX_const> pointing to a shared string in the string table. If the string does not already exist in the table, it is created first. Turns on the C<SvIsCOW> flag (or C<READONLY> and C<FAKE> in 5.16 and earlier). If the C<hash> parameter is non-zero, that value is used; otherwise the hash is computed. The string's hash can later be retrieved from the SV with the C<SvSHARED_HASH()> macro. The idea here is that as the string table is used for shared hash keys these strings will have C<SvPVX_const == HeKEY> and hash lookup will avoid string compare. SV* newSVpvn_share(const char* s, I32 len, U32 hash) =for hackers Found in file sv.c =item newSVpvn_utf8 X<newSVpvn_utf8> Creates a new SV and copies a string (which may contain C<NUL> (C<\0>) characters) into it. If C<utf8> is true, calls C<SvUTF8_on> on the new SV. Implemented as a wrapper around C<newSVpvn_flags>. SV* newSVpvn_utf8(const char* s, STRLEN len, U32 utf8) =for hackers Found in file sv.h =item newSVpvs X<newSVpvs> Like C<newSVpvn>, but takes a literal string instead of a string/length pair. SV* newSVpvs("literal string") =for hackers Found in file handy.h =item newSVpvs_flags X<newSVpvs_flags> Like C<newSVpvn_flags>, but takes a literal string instead of a string/length pair. SV* newSVpvs_flags("literal string", U32 flags) =for hackers Found in file handy.h =item newSVpv_share X<newSVpv_share> Like C<newSVpvn_share>, but takes a C<NUL>-terminated string instead of a string/length pair. SV* newSVpv_share(const char* s, U32 hash) =for hackers Found in file sv.c =item newSVpvs_share X<newSVpvs_share> Like C<newSVpvn_share>, but takes a literal string instead of a string/length pair and omits the hash parameter. SV* newSVpvs_share("literal string") =for hackers Found in file handy.h =item newSVrv X<newSVrv> Creates a new SV for the existing RV, C<rv>, to point to. If C<rv> is not an RV then it will be upgraded to one. If C<classname> is non-null then the new SV will be blessed in the specified package. The new SV is returned and its reference count is 1. The reference count 1 is owned by C<rv>. See also newRV_inc() and newRV_noinc() for creating a new RV properly. SV* newSVrv(SV *const rv, const char *const classname) =for hackers Found in file sv.c =item newSVsv X<newSVsv> Creates a new SV which is an exact duplicate of the original SV. (Uses C<sv_setsv>.) SV* newSVsv(SV *const old) =for hackers Found in file sv.c =item newSVsv_nomg X<newSVsv_nomg> Like C<newSVsv> but does not process get magic. SV* newSVsv_nomg(SV *const old) =for hackers Found in file sv.c =item newSV_type X<newSV_type> Creates a new SV, of the type specified. The reference count for the new SV is set to 1. SV* newSV_type(const svtype type) =for hackers Found in file sv.c =item newSVuv X<newSVuv> Creates a new SV and copies an unsigned integer into it. The reference count for the SV is set to 1. SV* newSVuv(const UV u) =for hackers Found in file sv.c =item sortsv_flags X<sortsv_flags> In-place sort an array of SV pointers with the given comparison routine, with various SORTf_* flag options. void sortsv_flags(SV** array, size_t num_elts, SVCOMPARE_t cmp, U32 flags) =for hackers Found in file pp_sort.c =item sv_2bool X<sv_2bool> This macro is only used by C<sv_true()> or its macro equivalent, and only if the latter's argument is neither C<SvPOK>, C<SvIOK> nor C<SvNOK>. It calls C<sv_2bool_flags> with the C<SV_GMAGIC> flag. bool sv_2bool(SV *const sv) =for hackers Found in file sv.c =item sv_2bool_flags X<sv_2bool_flags> This function is only used by C<sv_true()> and friends, and only if the latter's argument is neither C<SvPOK>, C<SvIOK> nor C<SvNOK>. If the flags contain C<SV_GMAGIC>, then it does an C<mg_get()> first. bool sv_2bool_flags(SV *sv, I32 flags) =for hackers Found in file sv.c =item sv_2cv X<sv_2cv> Using various gambits, try to get a CV from an SV; in addition, try if possible to set C<*st> and C<*gvp> to the stash and GV associated with it. The flags in C<lref> are passed to C<gv_fetchsv>. CV* sv_2cv(SV* sv, HV **const st, GV **const gvp, const I32 lref) =for hackers Found in file sv.c =item sv_2io X<sv_2io> Using various gambits, try to get an IO from an SV: the IO slot if its a GV; or the recursive result if we're an RV; or the IO slot of the symbol named after the PV if we're a string. 'Get' magic is ignored on the C<sv> passed in, but will be called on C<SvRV(sv)> if C<sv> is an RV. IO* sv_2io(SV *const sv) =for hackers Found in file sv.c =item sv_2iv_flags X<sv_2iv_flags> Return the integer value of an SV, doing any necessary string conversion. If C<flags> has the C<SV_GMAGIC> bit set, does an C<mg_get()> first. Normally used via the C<SvIV(sv)> and C<SvIVx(sv)> macros. IV sv_2iv_flags(SV *const sv, const I32 flags) =for hackers Found in file sv.c =item sv_2mortal X<sv_2mortal> Marks an existing SV as mortal. The SV will be destroyed "soon", either by an explicit call to C<FREETMPS>, or by an implicit call at places such as statement boundaries. C<SvTEMP()> is turned on which means that the SV's string buffer can be "stolen" if this SV is copied. See also C<L</sv_newmortal>> and C<L</sv_mortalcopy>>. SV* sv_2mortal(SV *const sv) =for hackers Found in file sv.c =item sv_2nv_flags X<sv_2nv_flags> Return the num value of an SV, doing any necessary string or integer conversion. If C<flags> has the C<SV_GMAGIC> bit set, does an C<mg_get()> first. Normally used via the C<SvNV(sv)> and C<SvNVx(sv)> macros. NV sv_2nv_flags(SV *const sv, const I32 flags) =for hackers Found in file sv.c =item sv_2pvbyte X<sv_2pvbyte> Return a pointer to the byte-encoded representation of the SV, and set C<*lp> to its length. If the SV is marked as being encoded as UTF-8, it will downgrade it to a byte string as a side-effect, if possible. If the SV cannot be downgraded, this croaks. Usually accessed via the C<SvPVbyte> macro. char* sv_2pvbyte(SV *sv, STRLEN *const lp) =for hackers Found in file sv.c =item sv_2pvutf8 X<sv_2pvutf8> Return a pointer to the UTF-8-encoded representation of the SV, and set C<*lp> to its length. May cause the SV to be upgraded to UTF-8 as a side-effect. Usually accessed via the C<SvPVutf8> macro. char* sv_2pvutf8(SV *sv, STRLEN *const lp) =for hackers Found in file sv.c =item sv_2pv_flags X<sv_2pv_flags> Returns a pointer to the string value of an SV, and sets C<*lp> to its length. If flags has the C<SV_GMAGIC> bit set, does an C<mg_get()> first. Coerces C<sv> to a string if necessary. Normally invoked via the C<SvPV_flags> macro. C<sv_2pv()> and C<sv_2pv_nomg> usually end up here too. char* sv_2pv_flags(SV *const sv, STRLEN *const lp, const I32 flags) =for hackers Found in file sv.c =item sv_2uv_flags X<sv_2uv_flags> Return the unsigned integer value of an SV, doing any necessary string conversion. If C<flags> has the C<SV_GMAGIC> bit set, does an C<mg_get()> first. Normally used via the C<SvUV(sv)> and C<SvUVx(sv)> macros. UV sv_2uv_flags(SV *const sv, const I32 flags) =for hackers Found in file sv.c =item sv_backoff X<sv_backoff> Remove any string offset. You should normally use the C<SvOOK_off> macro wrapper instead. void sv_backoff(SV *const sv) =for hackers Found in file sv.c =item sv_bless X<sv_bless> Blesses an SV into a specified package. The SV must be an RV. The package must be designated by its stash (see C<L</gv_stashpv>>). The reference count of the SV is unaffected. SV* sv_bless(SV *const sv, HV *const stash) =for hackers Found in file sv.c =item sv_catpv X<sv_catpv> Concatenates the C<NUL>-terminated string onto the end of the string which is in the SV. If the SV has the UTF-8 status set, then the bytes appended should be valid UTF-8. Handles 'get' magic, but not 'set' magic. See C<L</sv_catpv_mg>>. void sv_catpv(SV *const sv, const char* ptr) =for hackers Found in file sv.c =item sv_catpvf X<sv_catpvf> Processes its arguments like C<sprintf>, and appends the formatted output to an SV. As with C<sv_vcatpvfn> called with a non-null C-style variable argument list, argument reordering is not supported. If the appended data contains "wide" characters (including, but not limited to, SVs with a UTF-8 PV formatted with C<%s>, and characters >255 formatted with C<%c>), the original SV might get upgraded to UTF-8. Handles 'get' magic, but not 'set' magic. See C<L</sv_catpvf_mg>>. If the original SV was UTF-8, the pattern should be valid UTF-8; if the original SV was bytes, the pattern should be too. void sv_catpvf(SV *const sv, const char *const pat, ...) =for hackers Found in file sv.c =item sv_catpvf_mg X<sv_catpvf_mg> Like C<sv_catpvf>, but also handles 'set' magic. void sv_catpvf_mg(SV *const sv, const char *const pat, ...) =for hackers Found in file sv.c =item sv_catpvn X<sv_catpvn> Concatenates the string onto the end of the string which is in the SV. C<len> indicates number of bytes to copy. If the SV has the UTF-8 status set, then the bytes appended should be valid UTF-8. Handles 'get' magic, but not 'set' magic. See C<L</sv_catpvn_mg>>. void sv_catpvn(SV *dsv, const char *sstr, STRLEN len) =for hackers Found in file sv.c =item sv_catpvn_flags X<sv_catpvn_flags> Concatenates the string onto the end of the string which is in the SV. The C<len> indicates number of bytes to copy. By default, the string appended is assumed to be valid UTF-8 if the SV has the UTF-8 status set, and a string of bytes otherwise. One can force the appended string to be interpreted as UTF-8 by supplying the C<SV_CATUTF8> flag, and as bytes by supplying the C<SV_CATBYTES> flag; the SV or the string appended will be upgraded to UTF-8 if necessary. If C<flags> has the C<SV_SMAGIC> bit set, will C<mg_set> on C<dsv> afterwards if appropriate. C<sv_catpvn> and C<sv_catpvn_nomg> are implemented in terms of this function. void sv_catpvn_flags(SV *const dstr, const char *sstr, const STRLEN len, const I32 flags) =for hackers Found in file sv.c =item sv_catpvn_nomg X<sv_catpvn_nomg> Like C<sv_catpvn> but doesn't process magic. void sv_catpvn_nomg(SV* sv, const char* ptr, STRLEN len) =for hackers Found in file sv.h =item sv_catpvs X<sv_catpvs> Like C<sv_catpvn>, but takes a literal string instead of a string/length pair. void sv_catpvs(SV* sv, "literal string") =for hackers Found in file handy.h =item sv_catpvs_flags X<sv_catpvs_flags> Like C<sv_catpvn_flags>, but takes a literal string instead of a string/length pair. void sv_catpvs_flags(SV* sv, "literal string", I32 flags) =for hackers Found in file handy.h =item sv_catpvs_mg X<sv_catpvs_mg> Like C<sv_catpvn_mg>, but takes a literal string instead of a string/length pair. void sv_catpvs_mg(SV* sv, "literal string") =for hackers Found in file handy.h =item sv_catpvs_nomg X<sv_catpvs_nomg> Like C<sv_catpvn_nomg>, but takes a literal string instead of a string/length pair. void sv_catpvs_nomg(SV* sv, "literal string") =for hackers Found in file handy.h =item sv_catpv_flags X<sv_catpv_flags> Concatenates the C<NUL>-terminated string onto the end of the string which is in the SV. If the SV has the UTF-8 status set, then the bytes appended should be valid UTF-8. If C<flags> has the C<SV_SMAGIC> bit set, will C<mg_set> on the modified SV if appropriate. void sv_catpv_flags(SV *dstr, const char *sstr, const I32 flags) =for hackers Found in file sv.c =item sv_catpv_mg X<sv_catpv_mg> Like C<sv_catpv>, but also handles 'set' magic. void sv_catpv_mg(SV *const sv, const char *const ptr) =for hackers Found in file sv.c =item sv_catpv_nomg X<sv_catpv_nomg> Like C<sv_catpv> but doesn't process magic. void sv_catpv_nomg(SV* sv, const char* ptr) =for hackers Found in file sv.h =item sv_catsv X<sv_catsv> Concatenates the string from SV C<ssv> onto the end of the string in SV C<dsv>. If C<ssv> is null, does nothing; otherwise modifies only C<dsv>. Handles 'get' magic on both SVs, but no 'set' magic. See C<L</sv_catsv_mg>> and C<L</sv_catsv_nomg>>. void sv_catsv(SV *dstr, SV *sstr) =for hackers Found in file sv.c =item sv_catsv_flags X<sv_catsv_flags> Concatenates the string from SV C<ssv> onto the end of the string in SV C<dsv>. If C<ssv> is null, does nothing; otherwise modifies only C<dsv>. If C<flags> has the C<SV_GMAGIC> bit set, will call C<mg_get> on both SVs if appropriate. If C<flags> has the C<SV_SMAGIC> bit set, C<mg_set> will be called on the modified SV afterward, if appropriate. C<sv_catsv>, C<sv_catsv_nomg>, and C<sv_catsv_mg> are implemented in terms of this function. void sv_catsv_flags(SV *const dsv, SV *const ssv, const I32 flags) =for hackers Found in file sv.c =item sv_catsv_nomg X<sv_catsv_nomg> Like C<sv_catsv> but doesn't process magic. void sv_catsv_nomg(SV* dsv, SV* ssv) =for hackers Found in file sv.h =item sv_chop X<sv_chop> Efficient removal of characters from the beginning of the string buffer. C<SvPOK(sv)>, or at least C<SvPOKp(sv)>, must be true and C<ptr> must be a pointer to somewhere inside the string buffer. C<ptr> becomes the first character of the adjusted string. Uses the C<OOK> hack. On return, only C<SvPOK(sv)> and C<SvPOKp(sv)> among the C<OK> flags will be true. Beware: after this function returns, C<ptr> and SvPVX_const(sv) may no longer refer to the same chunk of data. The unfortunate similarity of this function's name to that of Perl's C<chop> operator is strictly coincidental. This function works from the left; C<chop> works from the right. void sv_chop(SV *const sv, const char *const ptr) =for hackers Found in file sv.c =item sv_clear X<sv_clear> Clear an SV: call any destructors, free up any memory used by the body, and free the body itself. The SV's head is I<not> freed, although its type is set to all 1's so that it won't inadvertently be assumed to be live during global destruction etc. This function should only be called when C<REFCNT> is zero. Most of the time you'll want to call C<sv_free()> (or its macro wrapper C<SvREFCNT_dec>) instead. void sv_clear(SV *const orig_sv) =for hackers Found in file sv.c =item sv_cmp X<sv_cmp> Compares the strings in two SVs. Returns -1, 0, or 1 indicating whether the string in C<sv1> is less than, equal to, or greater than the string in C<sv2>. Is UTF-8 and S<C<'use bytes'>> aware, handles get magic, and will coerce its args to strings if necessary. See also C<L</sv_cmp_locale>>. I32 sv_cmp(SV *const sv1, SV *const sv2) =for hackers Found in file sv.c =item sv_cmp_flags X<sv_cmp_flags> Compares the strings in two SVs. Returns -1, 0, or 1 indicating whether the string in C<sv1> is less than, equal to, or greater than the string in C<sv2>. Is UTF-8 and S<C<'use bytes'>> aware and will coerce its args to strings if necessary. If the flags has the C<SV_GMAGIC> bit set, it handles get magic. See also C<L</sv_cmp_locale_flags>>. I32 sv_cmp_flags(SV *const sv1, SV *const sv2, const U32 flags) =for hackers Found in file sv.c =item sv_cmp_locale X<sv_cmp_locale> Compares the strings in two SVs in a locale-aware manner. Is UTF-8 and S<C<'use bytes'>> aware, handles get magic, and will coerce its args to strings if necessary. See also C<L</sv_cmp>>. I32 sv_cmp_locale(SV *const sv1, SV *const sv2) =for hackers Found in file sv.c =item sv_cmp_locale_flags X<sv_cmp_locale_flags> Compares the strings in two SVs in a locale-aware manner. Is UTF-8 and S<C<'use bytes'>> aware and will coerce its args to strings if necessary. If the flags contain C<SV_GMAGIC>, it handles get magic. See also C<L</sv_cmp_flags>>. I32 sv_cmp_locale_flags(SV *const sv1, SV *const sv2, const U32 flags) =for hackers Found in file sv.c =item sv_collxfrm X<sv_collxfrm> This calls C<sv_collxfrm_flags> with the SV_GMAGIC flag. See C<L</sv_collxfrm_flags>>. char* sv_collxfrm(SV *const sv, STRLEN *const nxp) =for hackers Found in file sv.c =item sv_collxfrm_flags X<sv_collxfrm_flags> Add Collate Transform magic to an SV if it doesn't already have it. If the flags contain C<SV_GMAGIC>, it handles get-magic. Any scalar variable may carry C<PERL_MAGIC_collxfrm> magic that contains the scalar data of the variable, but transformed to such a format that a normal memory comparison can be used to compare the data according to the locale settings. char* sv_collxfrm_flags(SV *const sv, STRLEN *const nxp, I32 const flags) =for hackers Found in file sv.c =item sv_copypv X<sv_copypv> Copies a stringified representation of the source SV into the destination SV. Automatically performs any necessary C<mg_get> and coercion of numeric values into strings. Guaranteed to preserve C<UTF8> flag even from overloaded objects. Similar in nature to C<sv_2pv[_flags]> but operates directly on an SV instead of just the string. Mostly uses C<sv_2pv_flags> to do its work, except when that would lose the UTF-8'ness of the PV. void sv_copypv(SV *const dsv, SV *const ssv) =for hackers Found in file sv.c =item sv_copypv_flags X<sv_copypv_flags> Implementation of C<sv_copypv> and C<sv_copypv_nomg>. Calls get magic iff flags has the C<SV_GMAGIC> bit set. void sv_copypv_flags(SV *const dsv, SV *const ssv, const I32 flags) =for hackers Found in file sv.c =item sv_copypv_nomg X<sv_copypv_nomg> Like C<sv_copypv>, but doesn't invoke get magic first. void sv_copypv_nomg(SV *const dsv, SV *const ssv) =for hackers Found in file sv.c =item SvCUR X<SvCUR> Returns the length of the string which is in the SV. See C<L</SvLEN>>. STRLEN SvCUR(SV* sv) =for hackers Found in file sv.h =item SvCUR_set X<SvCUR_set> Set the current length of the string which is in the SV. See C<L</SvCUR>> and C<SvIV_set>>. void SvCUR_set(SV* sv, STRLEN len) =for hackers Found in file sv.h =item sv_dec X<sv_dec> Auto-decrement of the value in the SV, doing string to numeric conversion if necessary. Handles 'get' magic and operator overloading. void sv_dec(SV *const sv) =for hackers Found in file sv.c =item sv_dec_nomg X<sv_dec_nomg> Auto-decrement of the value in the SV, doing string to numeric conversion if necessary. Handles operator overloading. Skips handling 'get' magic. void sv_dec_nomg(SV *const sv) =for hackers Found in file sv.c =item sv_derived_from X<sv_derived_from> Exactly like L</sv_derived_from_pv>, but doesn't take a C<flags> parameter. bool sv_derived_from(SV* sv, const char *const name) =for hackers Found in file universal.c =item sv_derived_from_pv X<sv_derived_from_pv> Exactly like L</sv_derived_from_pvn>, but takes a nul-terminated string instead of a string/length pair. bool sv_derived_from_pv(SV* sv, const char *const name, U32 flags) =for hackers Found in file universal.c =item sv_derived_from_pvn X<sv_derived_from_pvn> Returns a boolean indicating whether the SV is derived from the specified class I<at the C level>. To check derivation at the Perl level, call C<isa()> as a normal Perl method. Currently, the only significant value for C<flags> is SVf_UTF8. bool sv_derived_from_pvn(SV* sv, const char *const name, const STRLEN len, U32 flags) =for hackers Found in file universal.c =item sv_derived_from_sv X<sv_derived_from_sv> Exactly like L</sv_derived_from_pvn>, but takes the name string in the form of an SV instead of a string/length pair. This is the advised form. bool sv_derived_from_sv(SV* sv, SV *namesv, U32 flags) =for hackers Found in file universal.c =item sv_does X<sv_does> Like L</sv_does_pv>, but doesn't take a C<flags> parameter. bool sv_does(SV* sv, const char *const name) =for hackers Found in file universal.c =item sv_does_pv X<sv_does_pv> Like L</sv_does_sv>, but takes a nul-terminated string instead of an SV. bool sv_does_pv(SV* sv, const char *const name, U32 flags) =for hackers Found in file universal.c =item sv_does_pvn X<sv_does_pvn> Like L</sv_does_sv>, but takes a string/length pair instead of an SV. bool sv_does_pvn(SV* sv, const char *const name, const STRLEN len, U32 flags) =for hackers Found in file universal.c =item sv_does_sv X<sv_does_sv> Returns a boolean indicating whether the SV performs a specific, named role. The SV can be a Perl object or the name of a Perl class. bool sv_does_sv(SV* sv, SV* namesv, U32 flags) =for hackers Found in file universal.c =item SvEND X<SvEND> Returns a pointer to the spot just after the last character in the string which is in the SV, where there is usually a trailing C<NUL> character (even though Perl scalars do not strictly require it). See C<L</SvCUR>>. Access the character as C<*(SvEND(sv))>. Warning: If C<SvCUR> is equal to C<SvLEN>, then C<SvEND> points to unallocated memory. char* SvEND(SV* sv) =for hackers Found in file sv.h =item sv_eq X<sv_eq> Returns a boolean indicating whether the strings in the two SVs are identical. Is UTF-8 and S<C<'use bytes'>> aware, handles get magic, and will coerce its args to strings if necessary. I32 sv_eq(SV* sv1, SV* sv2) =for hackers Found in file sv.c =item sv_eq_flags X<sv_eq_flags> Returns a boolean indicating whether the strings in the two SVs are identical. Is UTF-8 and S<C<'use bytes'>> aware and coerces its args to strings if necessary. If the flags has the C<SV_GMAGIC> bit set, it handles get-magic, too. I32 sv_eq_flags(SV* sv1, SV* sv2, const U32 flags) =for hackers Found in file sv.c =item sv_force_normal_flags X<sv_force_normal_flags> Undo various types of fakery on an SV, where fakery means "more than" a string: if the PV is a shared string, make a private copy; if we're a ref, stop refing; if we're a glob, downgrade to an C<xpvmg>; if we're a copy-on-write scalar, this is the on-write time when we do the copy, and is also used locally; if this is a vstring, drop the vstring magic. If C<SV_COW_DROP_PV> is set then a copy-on-write scalar drops its PV buffer (if any) and becomes C<SvPOK_off> rather than making a copy. (Used where this scalar is about to be set to some other value.) In addition, the C<flags> parameter gets passed to C<sv_unref_flags()> when unreffing. C<sv_force_normal> calls this function with flags set to 0. This function is expected to be used to signal to perl that this SV is about to be written to, and any extra book-keeping needs to be taken care of. Hence, it croaks on read-only values. void sv_force_normal_flags(SV *const sv, const U32 flags) =for hackers Found in file sv.c =item sv_free X<sv_free> Decrement an SV's reference count, and if it drops to zero, call C<sv_clear> to invoke destructors and free up any memory used by the body; finally, deallocating the SV's head itself. Normally called via a wrapper macro C<SvREFCNT_dec>. void sv_free(SV *const sv) =for hackers Found in file sv.c =item SvGAMAGIC X<SvGAMAGIC> Returns true if the SV has get magic or overloading. If either is true then the scalar is active data, and has the potential to return a new value every time it is accessed. Hence you must be careful to only read it once per user logical operation and work with that returned value. If neither is true then the scalar's value cannot change unless written to. U32 SvGAMAGIC(SV* sv) =for hackers Found in file sv.h =item sv_gets X<sv_gets> Get a line from the filehandle and store it into the SV, optionally appending to the currently-stored string. If C<append> is not 0, the line is appended to the SV instead of overwriting it. C<append> should be set to the byte offset that the appended string should start at in the SV (typically, C<SvCUR(sv)> is a suitable choice). char* sv_gets(SV *const sv, PerlIO *const fp, I32 append) =for hackers Found in file sv.c =item sv_get_backrefs X<sv_get_backrefs> NOTE: this function is experimental and may change or be removed without notice. If C<sv> is the target of a weak reference then it returns the back references structure associated with the sv; otherwise return C<NULL>. When returning a non-null result the type of the return is relevant. If it is an AV then the elements of the AV are the weak reference RVs which point at this item. If it is any other type then the item itself is the weak reference. See also C<Perl_sv_add_backref()>, C<Perl_sv_del_backref()>, C<Perl_sv_kill_backrefs()> SV* sv_get_backrefs(SV *const sv) =for hackers Found in file sv.c =item SvGROW X<SvGROW> Expands the character buffer in the SV so that it has room for the indicated number of bytes (remember to reserve space for an extra trailing C<NUL> character). Calls C<sv_grow> to perform the expansion if necessary. Returns a pointer to the character buffer. SV must be of type >= C<SVt_PV>. One alternative is to call C<sv_grow> if you are not sure of the type of SV. You might mistakenly think that C<len> is the number of bytes to add to the existing size, but instead it is the total size C<sv> should be. char * SvGROW(SV* sv, STRLEN len) =for hackers Found in file sv.h =item sv_grow X<sv_grow> Expands the character buffer in the SV. If necessary, uses C<sv_unref> and upgrades the SV to C<SVt_PV>. Returns a pointer to the character buffer. Use the C<SvGROW> wrapper instead. char* sv_grow(SV *const sv, STRLEN newlen) =for hackers Found in file sv.c =item sv_inc X<sv_inc> Auto-increment of the value in the SV, doing string to numeric conversion if necessary. Handles 'get' magic and operator overloading. void sv_inc(SV *const sv) =for hackers Found in file sv.c =item sv_inc_nomg X<sv_inc_nomg> Auto-increment of the value in the SV, doing string to numeric conversion if necessary. Handles operator overloading. Skips handling 'get' magic. void sv_inc_nomg(SV *const sv) =for hackers Found in file sv.c =item sv_insert X<sv_insert> Inserts and/or replaces a string at the specified offset/length within the SV. Similar to the Perl C<substr()> function, with C<littlelen> bytes starting at C<little> replacing C<len> bytes of the string in C<bigstr> starting at C<offset>. Handles get magic. void sv_insert(SV *const bigstr, const STRLEN offset, const STRLEN len, const char *const little, const STRLEN littlelen) =for hackers Found in file sv.c =item sv_insert_flags X<sv_insert_flags> Same as C<sv_insert>, but the extra C<flags> are passed to the C<SvPV_force_flags> that applies to C<bigstr>. void sv_insert_flags(SV *const bigstr, const STRLEN offset, const STRLEN len, const char *little, const STRLEN littlelen, const U32 flags) =for hackers Found in file sv.c =item SvIOK X<SvIOK> Returns a U32 value indicating whether the SV contains an integer. U32 SvIOK(SV* sv) =for hackers Found in file sv.h =item SvIOK_notUV X<SvIOK_notUV> Returns a boolean indicating whether the SV contains a signed integer. bool SvIOK_notUV(SV* sv) =for hackers Found in file sv.h =item SvIOK_off X<SvIOK_off> Unsets the IV status of an SV. void SvIOK_off(SV* sv) =for hackers Found in file sv.h =item SvIOK_on X<SvIOK_on> Tells an SV that it is an integer. void SvIOK_on(SV* sv) =for hackers Found in file sv.h =item SvIOK_only X<SvIOK_only> Tells an SV that it is an integer and disables all other C<OK> bits. void SvIOK_only(SV* sv) =for hackers Found in file sv.h =item SvIOK_only_UV X<SvIOK_only_UV> Tells an SV that it is an unsigned integer and disables all other C<OK> bits. void SvIOK_only_UV(SV* sv) =for hackers Found in file sv.h =item SvIOKp X<SvIOKp> Returns a U32 value indicating whether the SV contains an integer. Checks the B<private> setting. Use C<SvIOK> instead. U32 SvIOKp(SV* sv) =for hackers Found in file sv.h =item SvIOK_UV X<SvIOK_UV> Returns a boolean indicating whether the SV contains an integer that must be interpreted as unsigned. A non-negative integer whose value is within the range of both an IV and a UV may be flagged as either C<SvUOK> or C<SvIOK>. bool SvIOK_UV(SV* sv) =for hackers Found in file sv.h =item sv_isa X<sv_isa> Returns a boolean indicating whether the SV is blessed into the specified class. This does not check for subtypes or method overloading. Use C<sv_isa_sv> to verify an inheritance relationship in the same way as the C<isa> operator by respecting any C<isa()> method overloading; or C<sv_derived_from_sv> to test directly on the actual object type. int sv_isa(SV* sv, const char *const name) =for hackers Found in file sv.c =item sv_isa_sv X<sv_isa_sv> NOTE: this function is experimental and may change or be removed without notice. Returns a boolean indicating whether the SV is an object reference and is derived from the specified class, respecting any C<isa()> method overloading it may have. Returns false if C<sv> is not a reference to an object, or is not derived from the specified class. This is the function used to implement the behaviour of the C<isa> operator. Does not invoke magic on C<sv>. Not to be confused with the older C<sv_isa> function, which does not use an overloaded C<isa()> method, nor will check subclassing. bool sv_isa_sv(SV* sv, SV* namesv) =for hackers Found in file universal.c =item SvIsCOW X<SvIsCOW> Returns a U32 value indicating whether the SV is Copy-On-Write (either shared hash key scalars, or full Copy On Write scalars if 5.9.0 is configured for COW). U32 SvIsCOW(SV* sv) =for hackers Found in file sv.h =item SvIsCOW_shared_hash X<SvIsCOW_shared_hash> Returns a boolean indicating whether the SV is Copy-On-Write shared hash key scalar. bool SvIsCOW_shared_hash(SV* sv) =for hackers Found in file sv.h =item sv_isobject X<sv_isobject> Returns a boolean indicating whether the SV is an RV pointing to a blessed object. If the SV is not an RV, or if the object is not blessed, then this will return false. int sv_isobject(SV* sv) =for hackers Found in file sv.c =item SvIV X<SvIV> Coerces the given SV to IV and returns it. The returned value in many circumstances will get stored in C<sv>'s IV slot, but not in all cases. (Use C<L</sv_setiv>> to make sure it does). See C<L</SvIVx>> for a version which guarantees to evaluate C<sv> only once. IV SvIV(SV* sv) =for hackers Found in file sv.h =item SvIV_nomg X<SvIV_nomg> Like C<SvIV> but doesn't process magic. IV SvIV_nomg(SV* sv) =for hackers Found in file sv.h =item SvIV_set X<SvIV_set> Set the value of the IV pointer in sv to val. It is possible to perform the same function of this macro with an lvalue assignment to C<SvIVX>. With future Perls, however, it will be more efficient to use C<SvIV_set> instead of the lvalue assignment to C<SvIVX>. void SvIV_set(SV* sv, IV val) =for hackers Found in file sv.h =item SvIVX X<SvIVX> Returns the raw value in the SV's IV slot, without checks or conversions. Only use when you are sure C<SvIOK> is true. See also C<L</SvIV>>. IV SvIVX(SV* sv) =for hackers Found in file sv.h =item SvIVx X<SvIVx> Coerces the given SV to IV and returns it. The returned value in many circumstances will get stored in C<sv>'s IV slot, but not in all cases. (Use C<L</sv_setiv>> to make sure it does). This form guarantees to evaluate C<sv> only once. Only use this if C<sv> is an expression with side effects, otherwise use the more efficient C<SvIV>. IV SvIVx(SV* sv) =for hackers Found in file sv.h =item SvLEN X<SvLEN> Returns the size of the string buffer in the SV, not including any part attributable to C<SvOOK>. See C<L</SvCUR>>. STRLEN SvLEN(SV* sv) =for hackers Found in file sv.h =item sv_len X<sv_len> Returns the length of the string in the SV. Handles magic and type coercion and sets the UTF8 flag appropriately. See also C<L</SvCUR>>, which gives raw access to the C<xpv_cur> slot. STRLEN sv_len(SV *const sv) =for hackers Found in file sv.c =item SvLEN_set X<SvLEN_set> Set the size of the string buffer for the SV. See C<L</SvLEN>>. void SvLEN_set(SV* sv, STRLEN len) =for hackers Found in file sv.h =item sv_len_utf8 X<sv_len_utf8> Returns the number of characters in the string in an SV, counting wide UTF-8 bytes as a single character. Handles magic and type coercion. STRLEN sv_len_utf8(SV *const sv) =for hackers Found in file sv.c =item sv_magic X<sv_magic> Adds magic to an SV. First upgrades C<sv> to type C<SVt_PVMG> if necessary, then adds a new magic item of type C<how> to the head of the magic list. See C<L</sv_magicext>> (which C<sv_magic> now calls) for a description of the handling of the C<name> and C<namlen> arguments. You need to use C<sv_magicext> to add magic to C<SvREADONLY> SVs and also to add more than one instance of the same C<how>. void sv_magic(SV *const sv, SV *const obj, const int how, const char *const name, const I32 namlen) =for hackers Found in file sv.c =item sv_magicext X<sv_magicext> Adds magic to an SV, upgrading it if necessary. Applies the supplied C<vtable> and returns a pointer to the magic added. Note that C<sv_magicext> will allow things that C<sv_magic> will not. In particular, you can add magic to C<SvREADONLY> SVs, and add more than one instance of the same C<how>. If C<namlen> is greater than zero then a C<savepvn> I<copy> of C<name> is stored, if C<namlen> is zero then C<name> is stored as-is and - as another special case - if C<(name && namlen == HEf_SVKEY)> then C<name> is assumed to contain an SV* and is stored as-is with its C<REFCNT> incremented. (This is now used as a subroutine by C<sv_magic>.) MAGIC * sv_magicext(SV *const sv, SV *const obj, const int how, const MGVTBL *const vtbl, const char *const name, const I32 namlen) =for hackers Found in file sv.c =item SvMAGIC_set X<SvMAGIC_set> Set the value of the MAGIC pointer in C<sv> to val. See C<L</SvIV_set>>. void SvMAGIC_set(SV* sv, MAGIC* val) =for hackers Found in file sv.h =item sv_mortalcopy X<sv_mortalcopy> Creates a new SV which is a copy of the original SV (using C<sv_setsv>). The new SV is marked as mortal. It will be destroyed "soon", either by an explicit call to C<FREETMPS>, or by an implicit call at places such as statement boundaries. See also C<L</sv_newmortal>> and C<L</sv_2mortal>>. SV* sv_mortalcopy(SV *const oldsv) =for hackers Found in file sv.c =item sv_mortalcopy_flags X<sv_mortalcopy_flags> Like C<sv_mortalcopy>, but the extra C<flags> are passed to the C<sv_setsv_flags>. SV* sv_mortalcopy_flags(SV *const oldsv, U32 flags) =for hackers Found in file sv.c =item sv_newmortal X<sv_newmortal> Creates a new null SV which is mortal. The reference count of the SV is set to 1. It will be destroyed "soon", either by an explicit call to C<FREETMPS>, or by an implicit call at places such as statement boundaries. See also C<L</sv_mortalcopy>> and C<L</sv_2mortal>>. SV* sv_newmortal() =for hackers Found in file sv.c =item sv_newref X<sv_newref> Increment an SV's reference count. Use the C<SvREFCNT_inc()> wrapper instead. SV* sv_newref(SV *const sv) =for hackers Found in file sv.c =item SvNIOK X<SvNIOK> Returns a U32 value indicating whether the SV contains a number, integer or double. U32 SvNIOK(SV* sv) =for hackers Found in file sv.h =item SvNIOK_off X<SvNIOK_off> Unsets the NV/IV status of an SV. void SvNIOK_off(SV* sv) =for hackers Found in file sv.h =item SvNIOKp X<SvNIOKp> Returns a U32 value indicating whether the SV contains a number, integer or double. Checks the B<private> setting. Use C<SvNIOK> instead. U32 SvNIOKp(SV* sv) =for hackers Found in file sv.h =item SvNOK X<SvNOK> Returns a U32 value indicating whether the SV contains a double. U32 SvNOK(SV* sv) =for hackers Found in file sv.h =item SvNOK_off X<SvNOK_off> Unsets the NV status of an SV. void SvNOK_off(SV* sv) =for hackers Found in file sv.h =item SvNOK_on X<SvNOK_on> Tells an SV that it is a double. void SvNOK_on(SV* sv) =for hackers Found in file sv.h =item SvNOK_only X<SvNOK_only> Tells an SV that it is a double and disables all other OK bits. void SvNOK_only(SV* sv) =for hackers Found in file sv.h =item SvNOKp X<SvNOKp> Returns a U32 value indicating whether the SV contains a double. Checks the B<private> setting. Use C<SvNOK> instead. U32 SvNOKp(SV* sv) =for hackers Found in file sv.h =item SvNV X<SvNV> Coerces the given SV to NV and returns it. The returned value in many circumstances will get stored in C<sv>'s NV slot, but not in all cases. (Use C<L</sv_setnv>> to make sure it does). See C<L</SvNVx>> for a version which guarantees to evaluate C<sv> only once. NV SvNV(SV* sv) =for hackers Found in file sv.h =item SvNV_nomg X<SvNV_nomg> Like C<SvNV> but doesn't process magic. NV SvNV_nomg(SV* sv) =for hackers Found in file sv.h =item SvNV_set X<SvNV_set> Set the value of the NV pointer in C<sv> to val. See C<L</SvIV_set>>. void SvNV_set(SV* sv, NV val) =for hackers Found in file sv.h =item SvNVX X<SvNVX> Returns the raw value in the SV's NV slot, without checks or conversions. Only use when you are sure C<SvNOK> is true. See also C<L</SvNV>>. NV SvNVX(SV* sv) =for hackers Found in file sv.h =item SvNVx X<SvNVx> Coerces the given SV to NV and returns it. The returned value in many circumstances will get stored in C<sv>'s NV slot, but not in all cases. (Use C<L</sv_setnv>> to make sure it does). This form guarantees to evaluate C<sv> only once. Only use this if C<sv> is an expression with side effects, otherwise use the more efficient C<SvNV>. NV SvNVx(SV* sv) =for hackers Found in file sv.h =item SvOK X<SvOK> Returns a U32 value indicating whether the value is defined. This is only meaningful for scalars. U32 SvOK(SV* sv) =for hackers Found in file sv.h =item SvOOK X<SvOOK> Returns a U32 indicating whether the pointer to the string buffer is offset. This hack is used internally to speed up removal of characters from the beginning of a C<SvPV>. When C<SvOOK> is true, then the start of the allocated string buffer is actually C<SvOOK_offset()> bytes before C<SvPVX>. This offset used to be stored in C<SvIVX>, but is now stored within the spare part of the buffer. U32 SvOOK(SV* sv) =for hackers Found in file sv.h =item SvOOK_offset X<SvOOK_offset> Reads into C<len> the offset from C<SvPVX> back to the true start of the allocated buffer, which will be non-zero if C<sv_chop> has been used to efficiently remove characters from start of the buffer. Implemented as a macro, which takes the address of C<len>, which must be of type C<STRLEN>. Evaluates C<sv> more than once. Sets C<len> to 0 if C<SvOOK(sv)> is false. void SvOOK_offset(SV*sv, STRLEN len) =for hackers Found in file sv.h =item SvPOK X<SvPOK> Returns a U32 value indicating whether the SV contains a character string. U32 SvPOK(SV* sv) =for hackers Found in file sv.h =item SvPOK_off X<SvPOK_off> Unsets the PV status of an SV. void SvPOK_off(SV* sv) =for hackers Found in file sv.h =item SvPOK_on X<SvPOK_on> Tells an SV that it is a string. void SvPOK_on(SV* sv) =for hackers Found in file sv.h =item SvPOK_only X<SvPOK_only> Tells an SV that it is a string and disables all other C<OK> bits. Will also turn off the UTF-8 status. void SvPOK_only(SV* sv) =for hackers Found in file sv.h =item SvPOK_only_UTF8 X<SvPOK_only_UTF8> Tells an SV that it is a string and disables all other C<OK> bits, and leaves the UTF-8 status as it was. void SvPOK_only_UTF8(SV* sv) =for hackers Found in file sv.h =item SvPOKp X<SvPOKp> Returns a U32 value indicating whether the SV contains a character string. Checks the B<private> setting. Use C<SvPOK> instead. U32 SvPOKp(SV* sv) =for hackers Found in file sv.h =item sv_pos_b2u X<sv_pos_b2u> Converts the value pointed to by C<offsetp> from a count of bytes from the start of the string, to a count of the equivalent number of UTF-8 chars. Handles magic and type coercion. Use C<sv_pos_b2u_flags> in preference, which correctly handles strings longer than 2Gb. void sv_pos_b2u(SV *const sv, I32 *const offsetp) =for hackers Found in file sv.c =item sv_pos_b2u_flags X<sv_pos_b2u_flags> Converts C<offset> from a count of bytes from the start of the string, to a count of the equivalent number of UTF-8 chars. Handles type coercion. C<flags> is passed to C<SvPV_flags>, and usually should be C<SV_GMAGIC|SV_CONST_RETURN> to handle magic. STRLEN sv_pos_b2u_flags(SV *const sv, STRLEN const offset, U32 flags) =for hackers Found in file sv.c =item sv_pos_u2b X<sv_pos_u2b> Converts the value pointed to by C<offsetp> from a count of UTF-8 chars from the start of the string, to a count of the equivalent number of bytes; if C<lenp> is non-zero, it does the same to C<lenp>, but this time starting from the offset, rather than from the start of the string. Handles magic and type coercion. Use C<sv_pos_u2b_flags> in preference, which correctly handles strings longer than 2Gb. void sv_pos_u2b(SV *const sv, I32 *const offsetp, I32 *const lenp) =for hackers Found in file sv.c =item sv_pos_u2b_flags X<sv_pos_u2b_flags> Converts the offset from a count of UTF-8 chars from the start of the string, to a count of the equivalent number of bytes; if C<lenp> is non-zero, it does the same to C<lenp>, but this time starting from C<offset>, rather than from the start of the string. Handles type coercion. C<flags> is passed to C<SvPV_flags>, and usually should be C<SV_GMAGIC|SV_CONST_RETURN> to handle magic. STRLEN sv_pos_u2b_flags(SV *const sv, STRLEN uoffset, STRLEN *const lenp, U32 flags) =for hackers Found in file sv.c =item SvPV X<SvPV> Returns a pointer to the string in the SV, or a stringified form of the SV if the SV does not contain a string. The SV may cache the stringified version becoming C<SvPOK>. Handles 'get' magic. The C<len> variable will be set to the length of the string (this is a macro, so don't use C<&len>). See also C<L</SvPVx>> for a version which guarantees to evaluate C<sv> only once. Note that there is no guarantee that the return value of C<SvPV()> is equal to C<SvPVX(sv)>, or that C<SvPVX(sv)> contains valid data, or that successive calls to C<SvPV(sv)> will return the same pointer value each time. This is due to the way that things like overloading and Copy-On-Write are handled. In these cases, the return value may point to a temporary buffer or similar. If you absolutely need the C<SvPVX> field to be valid (for example, if you intend to write to it), then see C<L</SvPV_force>>. char* SvPV(SV* sv, STRLEN len) =for hackers Found in file sv.h =item SvPVbyte X<SvPVbyte> Like C<SvPV>, but converts C<sv> to byte representation first if necessary. If the SV cannot be downgraded from UTF-8, this croaks. char* SvPVbyte(SV* sv, STRLEN len) =for hackers Found in file sv.h =item SvPVbyte_force X<SvPVbyte_force> Like C<SvPV_force>, but converts C<sv> to byte representation first if necessary. If the SV cannot be downgraded from UTF-8, this croaks. char* SvPVbyte_force(SV* sv, STRLEN len) =for hackers Found in file sv.h =item SvPVbyte_nolen X<SvPVbyte_nolen> Like C<SvPV_nolen>, but converts C<sv> to byte representation first if necessary. If the SV cannot be downgraded from UTF-8, this croaks. char* SvPVbyte_nolen(SV* sv) =for hackers Found in file sv.h =item SvPVbyte_nomg X<SvPVbyte_nomg> Like C<SvPVbyte>, but does not process get magic. char* SvPVbyte_nomg(SV* sv, STRLEN len) =for hackers Found in file sv.h =item sv_pvbyten_force X<sv_pvbyten_force> The backend for the C<SvPVbytex_force> macro. Always use the macro instead. If the SV cannot be downgraded from UTF-8, this croaks. char* sv_pvbyten_force(SV *const sv, STRLEN *const lp) =for hackers Found in file sv.c =item SvPVbyte_or_null X<SvPVbyte_or_null> Like C<SvPVbyte>, but when C<sv> is undef, returns C<NULL>. char* SvPVbyte_or_null(SV* sv, STRLEN len) =for hackers Found in file sv.h =item SvPVbyte_or_null_nomg X<SvPVbyte_or_null_nomg> Like C<SvPVbyte_or_null>, but does not process get magic. char* SvPVbyte_or_null_nomg(SV* sv, STRLEN len) =for hackers Found in file sv.h =item SvPVbytex X<SvPVbytex> Like C<SvPV>, but converts C<sv> to byte representation first if necessary. Guarantees to evaluate C<sv> only once; use the more efficient C<SvPVbyte> otherwise. If the SV cannot be downgraded from UTF-8, this croaks. char* SvPVbytex(SV* sv, STRLEN len) =for hackers Found in file sv.h =item SvPVbytex_force X<SvPVbytex_force> Like C<SvPV_force>, but converts C<sv> to byte representation first if necessary. Guarantees to evaluate C<sv> only once; use the more efficient C<SvPVbyte_force> otherwise. If the SV cannot be downgraded from UTF-8, this croaks. char* SvPVbytex_force(SV* sv, STRLEN len) =for hackers Found in file sv.h =item SvPVCLEAR X<SvPVCLEAR> Ensures that sv is a SVt_PV and that its SvCUR is 0, and that it is properly null terminated. Equivalent to sv_setpvs(""), but more efficient. char * SvPVCLEAR(SV* sv) =for hackers Found in file sv.h =item SvPV_force X<SvPV_force> Like C<SvPV> but will force the SV into containing a string (C<SvPOK>), and only a string (C<SvPOK_only>), by hook or by crook. You need force if you are going to update the C<SvPVX> directly. Processes get magic. Note that coercing an arbitrary scalar into a plain PV will potentially strip useful data from it. For example if the SV was C<SvROK>, then the referent will have its reference count decremented, and the SV itself may be converted to an C<SvPOK> scalar with a string buffer containing a value such as C<"ARRAY(0x1234)">. char* SvPV_force(SV* sv, STRLEN len) =for hackers Found in file sv.h =item SvPV_force_nomg X<SvPV_force_nomg> Like C<SvPV_force>, but doesn't process get magic. char* SvPV_force_nomg(SV* sv, STRLEN len) =for hackers Found in file sv.h =item SvPV_nolen X<SvPV_nolen> Like C<SvPV> but doesn't set a length variable. char* SvPV_nolen(SV* sv) =for hackers Found in file sv.h =item SvPV_nomg X<SvPV_nomg> Like C<SvPV> but doesn't process magic. char* SvPV_nomg(SV* sv, STRLEN len) =for hackers Found in file sv.h =item SvPV_nomg_nolen X<SvPV_nomg_nolen> Like C<SvPV_nolen> but doesn't process magic. char* SvPV_nomg_nolen(SV* sv) =for hackers Found in file sv.h =item sv_pvn_force X<sv_pvn_force> Get a sensible string out of the SV somehow. A private implementation of the C<SvPV_force> macro for compilers which can't cope with complex macro expressions. Always use the macro instead. char* sv_pvn_force(SV* sv, STRLEN* lp) =for hackers Found in file sv.c =item sv_pvn_force_flags X<sv_pvn_force_flags> Get a sensible string out of the SV somehow. If C<flags> has the C<SV_GMAGIC> bit set, will C<mg_get> on C<sv> if appropriate, else not. C<sv_pvn_force> and C<sv_pvn_force_nomg> are implemented in terms of this function. You normally want to use the various wrapper macros instead: see C<L</SvPV_force>> and C<L</SvPV_force_nomg>>. char* sv_pvn_force_flags(SV *const sv, STRLEN *const lp, const I32 flags) =for hackers Found in file sv.c =item SvPV_set X<SvPV_set> This is probably not what you want to use, you probably wanted L</sv_usepvn_flags> or L</sv_setpvn> or L</sv_setpvs>. Set the value of the PV pointer in C<sv> to the Perl allocated C<NUL>-terminated string C<val>. See also C<L</SvIV_set>>. Remember to free the previous PV buffer. There are many things to check. Beware that the existing pointer may be involved in copy-on-write or other mischief, so do C<SvOOK_off(sv)> and use C<sv_force_normal> or C<SvPV_force> (or check the C<SvIsCOW> flag) first to make sure this modification is safe. Then finally, if it is not a COW, call C<SvPV_free> to free the previous PV buffer. void SvPV_set(SV* sv, char* val) =for hackers Found in file sv.h =item SvPVutf8 X<SvPVutf8> Like C<SvPV>, but converts C<sv> to UTF-8 first if necessary. char* SvPVutf8(SV* sv, STRLEN len) =for hackers Found in file sv.h =item sv_pvutf8n_force X<sv_pvutf8n_force> The backend for the C<SvPVutf8x_force> macro. Always use the macro instead. char* sv_pvutf8n_force(SV *const sv, STRLEN *const lp) =for hackers Found in file sv.c =item SvPVutf8x X<SvPVutf8x> Like C<SvPV>, but converts C<sv> to UTF-8 first if necessary. Guarantees to evaluate C<sv> only once; use the more efficient C<SvPVutf8> otherwise. char* SvPVutf8x(SV* sv, STRLEN len) =for hackers Found in file sv.h =item SvPVutf8x_force X<SvPVutf8x_force> Like C<SvPV_force>, but converts C<sv> to UTF-8 first if necessary. Guarantees to evaluate C<sv> only once; use the more efficient C<SvPVutf8_force> otherwise. char* SvPVutf8x_force(SV* sv, STRLEN len) =for hackers Found in file sv.h =item SvPVutf8_force X<SvPVutf8_force> Like C<SvPV_force>, but converts C<sv> to UTF-8 first if necessary. char* SvPVutf8_force(SV* sv, STRLEN len) =for hackers Found in file sv.h =item SvPVutf8_nolen X<SvPVutf8_nolen> Like C<SvPV_nolen>, but converts C<sv> to UTF-8 first if necessary. char* SvPVutf8_nolen(SV* sv) =for hackers Found in file sv.h =item SvPVutf8_nomg X<SvPVutf8_nomg> Like C<SvPVutf8>, but does not process get magic. char* SvPVutf8_nomg(SV* sv, STRLEN len) =for hackers Found in file sv.h =item SvPVutf8_or_null X<SvPVutf8_or_null> Like C<SvPVutf8>, but when C<sv> is undef, returns C<NULL>. char* SvPVutf8_or_null(SV* sv, STRLEN len) =for hackers Found in file sv.h =item SvPVutf8_or_null_nomg X<SvPVutf8_or_null_nomg> Like C<SvPVutf8_or_null>, but does not process get magic. char* SvPVutf8_or_null_nomg(SV* sv, STRLEN len) =for hackers Found in file sv.h =item SvPVX X<SvPVX> Returns a pointer to the physical string in the SV. The SV must contain a string. Prior to 5.9.3 it is not safe to execute this macro unless the SV's type >= C<SVt_PV>. This is also used to store the name of an autoloaded subroutine in an XS AUTOLOAD routine. See L<perlguts/Autoloading with XSUBs>. char* SvPVX(SV* sv) =for hackers Found in file sv.h =item SvPVx X<SvPVx> A version of C<SvPV> which guarantees to evaluate C<sv> only once. Only use this if C<sv> is an expression with side effects, otherwise use the more efficient C<SvPV>. char* SvPVx(SV* sv, STRLEN len) =for hackers Found in file sv.h =item SvREADONLY X<SvREADONLY> Returns true if the argument is readonly, otherwise returns false. Exposed to perl code via Internals::SvREADONLY(). U32 SvREADONLY(SV* sv) =for hackers Found in file sv.h =item SvREADONLY_off X<SvREADONLY_off> Mark an object as not-readonly. Exactly what this mean depends on the object type. Exposed to perl code via Internals::SvREADONLY(). U32 SvREADONLY_off(SV* sv) =for hackers Found in file sv.h =item SvREADONLY_on X<SvREADONLY_on> Mark an object as readonly. Exactly what this means depends on the object type. Exposed to perl code via Internals::SvREADONLY(). U32 SvREADONLY_on(SV* sv) =for hackers Found in file sv.h =item sv_ref X<sv_ref> Returns a SV describing what the SV passed in is a reference to. dst can be a SV to be set to the description or NULL, in which case a mortal SV is returned. If ob is true and the SV is blessed, the description is the class name, otherwise it is the type of the SV, "SCALAR", "ARRAY" etc. SV* sv_ref(SV *dst, const SV *const sv, const int ob) =for hackers Found in file sv.c =item SvREFCNT X<SvREFCNT> Returns the value of the object's reference count. Exposed to perl code via Internals::SvREFCNT(). U32 SvREFCNT(SV* sv) =for hackers Found in file sv.h =item SvREFCNT_dec X<SvREFCNT_dec> Decrements the reference count of the given SV. C<sv> may be C<NULL>. void SvREFCNT_dec(SV *sv) =for hackers Found in file sv.h =item SvREFCNT_dec_NN X<SvREFCNT_dec_NN> Same as C<SvREFCNT_dec>, but can only be used if you know C<sv> is not C<NULL>. Since we don't have to check the NULLness, it's faster and smaller. void SvREFCNT_dec_NN(SV *sv) =for hackers Found in file sv.h =item SvREFCNT_inc X<SvREFCNT_inc> Increments the reference count of the given SV, returning the SV. All of the following C<SvREFCNT_inc>* are optimized versions of C<SvREFCNT_inc>, and can be replaced with C<SvREFCNT_inc>. SV * SvREFCNT_inc(SV *sv) =for hackers Found in file sv.h =item SvREFCNT_inc_NN X<SvREFCNT_inc_NN> Same as C<SvREFCNT_inc>, but can only be used if you know C<sv> is not C<NULL>. Since we don't have to check the NULLness, it's faster and smaller. SV * SvREFCNT_inc_NN(SV *sv) =for hackers Found in file sv.h =item SvREFCNT_inc_simple X<SvREFCNT_inc_simple> Same as C<SvREFCNT_inc>, but can only be used with expressions without side effects. Since we don't have to store a temporary value, it's faster. SV* SvREFCNT_inc_simple(SV* sv) =for hackers Found in file sv.h =item SvREFCNT_inc_simple_NN X<SvREFCNT_inc_simple_NN> Same as C<SvREFCNT_inc_simple>, but can only be used if you know C<sv> is not C<NULL>. Since we don't have to check the NULLness, it's faster and smaller. SV* SvREFCNT_inc_simple_NN(SV* sv) =for hackers Found in file sv.h =item SvREFCNT_inc_simple_void X<SvREFCNT_inc_simple_void> Same as C<SvREFCNT_inc_simple>, but can only be used if you don't need the return value. The macro doesn't need to return a meaningful value. void SvREFCNT_inc_simple_void(SV* sv) =for hackers Found in file sv.h =item SvREFCNT_inc_simple_void_NN X<SvREFCNT_inc_simple_void_NN> Same as C<SvREFCNT_inc>, but can only be used if you don't need the return value, and you know that C<sv> is not C<NULL>. The macro doesn't need to return a meaningful value, or check for NULLness, so it's smaller and faster. void SvREFCNT_inc_simple_void_NN(SV* sv) =for hackers Found in file sv.h =item SvREFCNT_inc_void X<SvREFCNT_inc_void> Same as C<SvREFCNT_inc>, but can only be used if you don't need the return value. The macro doesn't need to return a meaningful value. void SvREFCNT_inc_void(SV *sv) =for hackers Found in file sv.h =item SvREFCNT_inc_void_NN X<SvREFCNT_inc_void_NN> Same as C<SvREFCNT_inc>, but can only be used if you don't need the return value, and you know that C<sv> is not C<NULL>. The macro doesn't need to return a meaningful value, or check for NULLness, so it's smaller and faster. void SvREFCNT_inc_void_NN(SV* sv) =for hackers Found in file sv.h =item sv_reftype X<sv_reftype> Returns a string describing what the SV is a reference to. If ob is true and the SV is blessed, the string is the class name, otherwise it is the type of the SV, "SCALAR", "ARRAY" etc. const char* sv_reftype(const SV *const sv, const int ob) =for hackers Found in file sv.c =item sv_replace X<sv_replace> Make the first argument a copy of the second, then delete the original. The target SV physically takes over ownership of the body of the source SV and inherits its flags; however, the target keeps any magic it owns, and any magic in the source is discarded. Note that this is a rather specialist SV copying operation; most of the time you'll want to use C<sv_setsv> or one of its many macro front-ends. void sv_replace(SV *const sv, SV *const nsv) =for hackers Found in file sv.c =item sv_report_used X<sv_report_used> Dump the contents of all SVs not yet freed (debugging aid). void sv_report_used() =for hackers Found in file sv.c =item sv_reset X<sv_reset> Underlying implementation for the C<reset> Perl function. Note that the perl-level function is vaguely deprecated. void sv_reset(const char* s, HV *const stash) =for hackers Found in file sv.c =item SvROK X<SvROK> Tests if the SV is an RV. U32 SvROK(SV* sv) =for hackers Found in file sv.h =item SvROK_off X<SvROK_off> Unsets the RV status of an SV. void SvROK_off(SV* sv) =for hackers Found in file sv.h =item SvROK_on X<SvROK_on> Tells an SV that it is an RV. void SvROK_on(SV* sv) =for hackers Found in file sv.h =item SvRV X<SvRV> Dereferences an RV to return the SV. SV* SvRV(SV* sv) =for hackers Found in file sv.h =item SvRV_set X<SvRV_set> Set the value of the RV pointer in C<sv> to val. See C<L</SvIV_set>>. void SvRV_set(SV* sv, SV* val) =for hackers Found in file sv.h =item sv_rvunweaken X<sv_rvunweaken> Unweaken a reference: Clear the C<SvWEAKREF> flag on this RV; remove the backreference to this RV from the array of backreferences associated with the target SV, increment the refcount of the target. Silently ignores C<undef> and warns on non-weak references. SV* sv_rvunweaken(SV *const sv) =for hackers Found in file sv.c =item sv_rvweaken X<sv_rvweaken> Weaken a reference: set the C<SvWEAKREF> flag on this RV; give the referred-to SV C<PERL_MAGIC_backref> magic if it hasn't already; and push a back-reference to this RV onto the array of backreferences associated with that magic. If the RV is magical, set magic will be called after the RV is cleared. Silently ignores C<undef> and warns on already-weak references. SV* sv_rvweaken(SV *const sv) =for hackers Found in file sv.c =item sv_setiv X<sv_setiv> Copies an integer into the given SV, upgrading first if necessary. Does not handle 'set' magic. See also C<L</sv_setiv_mg>>. void sv_setiv(SV *const sv, const IV num) =for hackers Found in file sv.c =item sv_setiv_mg X<sv_setiv_mg> Like C<sv_setiv>, but also handles 'set' magic. void sv_setiv_mg(SV *const sv, const IV i) =for hackers Found in file sv.c =item sv_setnv X<sv_setnv> Copies a double into the given SV, upgrading first if necessary. Does not handle 'set' magic. See also C<L</sv_setnv_mg>>. void sv_setnv(SV *const sv, const NV num) =for hackers Found in file sv.c =item sv_setnv_mg X<sv_setnv_mg> Like C<sv_setnv>, but also handles 'set' magic. void sv_setnv_mg(SV *const sv, const NV num) =for hackers Found in file sv.c =item sv_setpv X<sv_setpv> Copies a string into an SV. The string must be terminated with a C<NUL> character, and not contain embeded C<NUL>'s. Does not handle 'set' magic. See C<L</sv_setpv_mg>>. void sv_setpv(SV *const sv, const char *const ptr) =for hackers Found in file sv.c =item sv_setpvf X<sv_setpvf> Works like C<sv_catpvf> but copies the text into the SV instead of appending it. Does not handle 'set' magic. See C<L</sv_setpvf_mg>>. void sv_setpvf(SV *const sv, const char *const pat, ...) =for hackers Found in file sv.c =item sv_setpvf_mg X<sv_setpvf_mg> Like C<sv_setpvf>, but also handles 'set' magic. void sv_setpvf_mg(SV *const sv, const char *const pat, ...) =for hackers Found in file sv.c =item sv_setpviv X<sv_setpviv> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. Copies an integer into the given SV, also updating its string value. Does not handle 'set' magic. See C<L</sv_setpviv_mg>>. void sv_setpviv(SV *const sv, const IV num) =for hackers Found in file sv.c =item sv_setpviv_mg X<sv_setpviv_mg> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. Like C<sv_setpviv>, but also handles 'set' magic. void sv_setpviv_mg(SV *const sv, const IV iv) =for hackers Found in file sv.c =item sv_setpvn X<sv_setpvn> Copies a string (possibly containing embedded C<NUL> characters) into an SV. The C<len> parameter indicates the number of bytes to be copied. If the C<ptr> argument is NULL the SV will become undefined. Does not handle 'set' magic. See C<L</sv_setpvn_mg>>. The UTF-8 flag is not changed by this function. A terminating NUL byte is guaranteed. void sv_setpvn(SV *const sv, const char *const ptr, const STRLEN len) =for hackers Found in file sv.c =item sv_setpvn_mg X<sv_setpvn_mg> Like C<sv_setpvn>, but also handles 'set' magic. void sv_setpvn_mg(SV *const sv, const char *const ptr, const STRLEN len) =for hackers Found in file sv.c =item sv_setpvs X<sv_setpvs> Like C<sv_setpvn>, but takes a literal string instead of a string/length pair. void sv_setpvs(SV* sv, "literal string") =for hackers Found in file handy.h =item sv_setpvs_mg X<sv_setpvs_mg> Like C<sv_setpvn_mg>, but takes a literal string instead of a string/length pair. void sv_setpvs_mg(SV* sv, "literal string") =for hackers Found in file handy.h =item sv_setpv_bufsize X<sv_setpv_bufsize> Sets the SV to be a string of cur bytes length, with at least len bytes available. Ensures that there is a null byte at SvEND. Returns a char * pointer to the SvPV buffer. char * sv_setpv_bufsize(SV *const sv, const STRLEN cur, const STRLEN len) =for hackers Found in file sv.c =item sv_setpv_mg X<sv_setpv_mg> Like C<sv_setpv>, but also handles 'set' magic. void sv_setpv_mg(SV *const sv, const char *const ptr) =for hackers Found in file sv.c =item sv_setref_iv X<sv_setref_iv> Copies an integer into a new SV, optionally blessing the SV. The C<rv> argument will be upgraded to an RV. That RV will be modified to point to the new SV. The C<classname> argument indicates the package for the blessing. Set C<classname> to C<NULL> to avoid the blessing. The new SV will have a reference count of 1, and the RV will be returned. SV* sv_setref_iv(SV *const rv, const char *const classname, const IV iv) =for hackers Found in file sv.c =item sv_setref_nv X<sv_setref_nv> Copies a double into a new SV, optionally blessing the SV. The C<rv> argument will be upgraded to an RV. That RV will be modified to point to the new SV. The C<classname> argument indicates the package for the blessing. Set C<classname> to C<NULL> to avoid the blessing. The new SV will have a reference count of 1, and the RV will be returned. SV* sv_setref_nv(SV *const rv, const char *const classname, const NV nv) =for hackers Found in file sv.c =item sv_setref_pv X<sv_setref_pv> Copies a pointer into a new SV, optionally blessing the SV. The C<rv> argument will be upgraded to an RV. That RV will be modified to point to the new SV. If the C<pv> argument is C<NULL>, then C<PL_sv_undef> will be placed into the SV. The C<classname> argument indicates the package for the blessing. Set C<classname> to C<NULL> to avoid the blessing. The new SV will have a reference count of 1, and the RV will be returned. Do not use with other Perl types such as HV, AV, SV, CV, because those objects will become corrupted by the pointer copy process. Note that C<sv_setref_pvn> copies the string while this copies the pointer. SV* sv_setref_pv(SV *const rv, const char *const classname, void *const pv) =for hackers Found in file sv.c =item sv_setref_pvn X<sv_setref_pvn> Copies a string into a new SV, optionally blessing the SV. The length of the string must be specified with C<n>. The C<rv> argument will be upgraded to an RV. That RV will be modified to point to the new SV. The C<classname> argument indicates the package for the blessing. Set C<classname> to C<NULL> to avoid the blessing. The new SV will have a reference count of 1, and the RV will be returned. Note that C<sv_setref_pv> copies the pointer while this copies the string. SV* sv_setref_pvn(SV *const rv, const char *const classname, const char *const pv, const STRLEN n) =for hackers Found in file sv.c =item sv_setref_pvs X<sv_setref_pvs> Like C<sv_setref_pvn>, but takes a literal string instead of a string/length pair. SV * sv_setref_pvs(SV *const rv, const char *const classname, "literal string") =for hackers Found in file handy.h =item sv_setref_uv X<sv_setref_uv> Copies an unsigned integer into a new SV, optionally blessing the SV. The C<rv> argument will be upgraded to an RV. That RV will be modified to point to the new SV. The C<classname> argument indicates the package for the blessing. Set C<classname> to C<NULL> to avoid the blessing. The new SV will have a reference count of 1, and the RV will be returned. SV* sv_setref_uv(SV *const rv, const char *const classname, const UV uv) =for hackers Found in file sv.c =item sv_setsv X<sv_setsv> Copies the contents of the source SV C<ssv> into the destination SV C<dsv>. The source SV may be destroyed if it is mortal, so don't use this function if the source SV needs to be reused. Does not handle 'set' magic on destination SV. Calls 'get' magic on source SV. Loosely speaking, it performs a copy-by-value, obliterating any previous content of the destination. You probably want to use one of the assortment of wrappers, such as C<SvSetSV>, C<SvSetSV_nosteal>, C<SvSetMagicSV> and C<SvSetMagicSV_nosteal>. void sv_setsv(SV *dstr, SV *sstr) =for hackers Found in file sv.c =item sv_setsv_flags X<sv_setsv_flags> Copies the contents of the source SV C<ssv> into the destination SV C<dsv>. The source SV may be destroyed if it is mortal, so don't use this function if the source SV needs to be reused. Does not handle 'set' magic. Loosely speaking, it performs a copy-by-value, obliterating any previous content of the destination. If the C<flags> parameter has the C<SV_GMAGIC> bit set, will C<mg_get> on C<ssv> if appropriate, else not. If the C<flags> parameter has the C<SV_NOSTEAL> bit set then the buffers of temps will not be stolen. C<sv_setsv> and C<sv_setsv_nomg> are implemented in terms of this function. You probably want to use one of the assortment of wrappers, such as C<SvSetSV>, C<SvSetSV_nosteal>, C<SvSetMagicSV> and C<SvSetMagicSV_nosteal>. This is the primary function for copying scalars, and most other copy-ish functions and macros use this underneath. void sv_setsv_flags(SV *dstr, SV *sstr, const I32 flags) =for hackers Found in file sv.c =item sv_setsv_mg X<sv_setsv_mg> Like C<sv_setsv>, but also handles 'set' magic. void sv_setsv_mg(SV *const dstr, SV *const sstr) =for hackers Found in file sv.c =item sv_setsv_nomg X<sv_setsv_nomg> Like C<sv_setsv> but doesn't process magic. void sv_setsv_nomg(SV* dsv, SV* ssv) =for hackers Found in file sv.h =item sv_setuv X<sv_setuv> Copies an unsigned integer into the given SV, upgrading first if necessary. Does not handle 'set' magic. See also C<L</sv_setuv_mg>>. void sv_setuv(SV *const sv, const UV num) =for hackers Found in file sv.c =item sv_setuv_mg X<sv_setuv_mg> Like C<sv_setuv>, but also handles 'set' magic. void sv_setuv_mg(SV *const sv, const UV u) =for hackers Found in file sv.c =item sv_set_undef X<sv_set_undef> Equivalent to C<sv_setsv(sv, &PL_sv_undef)>, but more efficient. Doesn't handle set magic. The perl equivalent is C<$sv = undef;>. Note that it doesn't free any string buffer, unlike C<undef $sv>. Introduced in perl 5.25.12. void sv_set_undef(SV *sv) =for hackers Found in file sv.c =item SvSTASH X<SvSTASH> Returns the stash of the SV. HV* SvSTASH(SV* sv) =for hackers Found in file sv.h =item SvSTASH_set X<SvSTASH_set> Set the value of the STASH pointer in C<sv> to val. See C<L</SvIV_set>>. void SvSTASH_set(SV* sv, HV* val) =for hackers Found in file sv.h =item SvTAINT X<SvTAINT> Taints an SV if tainting is enabled, and if some input to the current expression is tainted--usually a variable, but possibly also implicit inputs such as locale settings. C<SvTAINT> propagates that taintedness to the outputs of an expression in a pessimistic fashion; i.e., without paying attention to precisely which outputs are influenced by which inputs. void SvTAINT(SV* sv) =for hackers Found in file sv.h =item SvTAINTED X<SvTAINTED> Checks to see if an SV is tainted. Returns TRUE if it is, FALSE if not. bool SvTAINTED(SV* sv) =for hackers Found in file sv.h =item sv_tainted X<sv_tainted> Test an SV for taintedness. Use C<SvTAINTED> instead. bool sv_tainted(SV *const sv) =for hackers Found in file sv.c =item SvTAINTED_off X<SvTAINTED_off> Untaints an SV. Be I<very> careful with this routine, as it short-circuits some of Perl's fundamental security features. XS module authors should not use this function unless they fully understand all the implications of unconditionally untainting the value. Untainting should be done in the standard perl fashion, via a carefully crafted regexp, rather than directly untainting variables. void SvTAINTED_off(SV* sv) =for hackers Found in file sv.h =item SvTAINTED_on X<SvTAINTED_on> Marks an SV as tainted if tainting is enabled. void SvTAINTED_on(SV* sv) =for hackers Found in file sv.h =item SvTRUE X<SvTRUE> Returns a boolean indicating whether Perl would evaluate the SV as true or false. See C<L</SvOK>> for a defined/undefined test. Handles 'get' magic unless the scalar is already C<SvPOK>, C<SvIOK> or C<SvNOK> (the public, not the private flags). As of Perl 5.32, this is guaranteed to evaluate C<sv> only once. Prior to that release, use C<L</SvTRUEx>> for single evaluation. bool SvTRUE(SV* sv) =for hackers Found in file sv.h =item sv_true X<sv_true> Returns true if the SV has a true value by Perl's rules. Use the C<SvTRUE> macro instead, which may call C<sv_true()> or may instead use an in-line version. I32 sv_true(SV *const sv) =for hackers Found in file sv.c =item SvTRUE_nomg X<SvTRUE_nomg> Returns a boolean indicating whether Perl would evaluate the SV as true or false. See C<L</SvOK>> for a defined/undefined test. Does not handle 'get' magic. bool SvTRUE_nomg(SV* sv) =for hackers Found in file sv.h =item SvTRUEx X<SvTRUEx> Returns a boolean indicating whether Perl would evaluate the SV as true or false. See C<L</SvOK>> for a defined/undefined test. Handles 'get' magic unless the scalar is already C<SvPOK>, C<SvIOK> or C<SvNOK> (the public, not the private flags). This form guarantees to evaluate C<sv> only once. Only use this if C<sv> is an expression with side effects, otherwise use the more efficient C<SvTRUE>. bool SvTRUEx(SV* sv) =for hackers Found in file sv.h =item SvTYPE X<SvTYPE> Returns the type of the SV. See C<L</svtype>>. svtype SvTYPE(SV* sv) =for hackers Found in file sv.h =item sv_unmagic X<sv_unmagic> Removes all magic of type C<type> from an SV. int sv_unmagic(SV *const sv, const int type) =for hackers Found in file sv.c =item sv_unmagicext X<sv_unmagicext> Removes all magic of type C<type> with the specified C<vtbl> from an SV. int sv_unmagicext(SV *const sv, const int type, MGVTBL *vtbl) =for hackers Found in file sv.c =item sv_unref_flags X<sv_unref_flags> Unsets the RV status of the SV, and decrements the reference count of whatever was being referenced by the RV. This can almost be thought of as a reversal of C<newSVrv>. The C<cflags> argument can contain C<SV_IMMEDIATE_UNREF> to force the reference count to be decremented (otherwise the decrementing is conditional on the reference count being different from one or the reference being a readonly SV). See C<L</SvROK_off>>. void sv_unref_flags(SV *const ref, const U32 flags) =for hackers Found in file sv.c =item sv_untaint X<sv_untaint> Untaint an SV. Use C<SvTAINTED_off> instead. void sv_untaint(SV *const sv) =for hackers Found in file sv.c =item SvUOK X<SvUOK> Returns a boolean indicating whether the SV contains an integer that must be interpreted as unsigned. A non-negative integer whose value is within the range of both an IV and a UV may be flagged as either C<SvUOK> or C<SvIOK>. bool SvUOK(SV* sv) =for hackers Found in file sv.h =item SvUPGRADE X<SvUPGRADE> Used to upgrade an SV to a more complex form. Uses C<sv_upgrade> to perform the upgrade if necessary. See C<L</svtype>>. void SvUPGRADE(SV* sv, svtype type) =for hackers Found in file sv.h =item sv_upgrade X<sv_upgrade> Upgrade an SV to a more complex form. Generally adds a new body type to the SV, then copies across as much information as possible from the old body. It croaks if the SV is already in a more complex form than requested. You generally want to use the C<SvUPGRADE> macro wrapper, which checks the type before calling C<sv_upgrade>, and hence does not croak. See also C<L</svtype>>. void sv_upgrade(SV *const sv, svtype new_type) =for hackers Found in file sv.c =item sv_usepvn_flags X<sv_usepvn_flags> Tells an SV to use C<ptr> to find its string value. Normally the string is stored inside the SV, but sv_usepvn allows the SV to use an outside string. C<ptr> should point to memory that was allocated by L<C<Newx>|perlclib/Memory Management and String Handling>. It must be the start of a C<Newx>-ed block of memory, and not a pointer to the middle of it (beware of L<C<OOK>|perlguts/Offsets> and copy-on-write), and not be from a non-C<Newx> memory allocator like C<malloc>. The string length, C<len>, must be supplied. By default this function will C<Renew> (i.e. realloc, move) the memory pointed to by C<ptr>, so that pointer should not be freed or used by the programmer after giving it to C<sv_usepvn>, and neither should any pointers from "behind" that pointer (e.g. ptr + 1) be used. If S<C<flags & SV_SMAGIC>> is true, will call C<SvSETMAGIC>. If S<C<flags & SV_HAS_TRAILING_NUL>> is true, then C<ptr[len]> must be C<NUL>, and the realloc will be skipped (i.e. the buffer is actually at least 1 byte longer than C<len>, and already meets the requirements for storing in C<SvPVX>). void sv_usepvn_flags(SV *const sv, char* ptr, const STRLEN len, const U32 flags) =for hackers Found in file sv.c =item SvUTF8 X<SvUTF8> Returns a U32 value indicating the UTF-8 status of an SV. If things are set-up properly, this indicates whether or not the SV contains UTF-8 encoded data. You should use this I<after> a call to C<SvPV()> or one of its variants, in case any call to string overloading updates the internal flag. If you want to take into account the L<bytes> pragma, use C<L</DO_UTF8>> instead. U32 SvUTF8(SV* sv) =for hackers Found in file sv.h =item sv_utf8_decode X<sv_utf8_decode> If the PV of the SV is an octet sequence in Perl's extended UTF-8 and contains a multiple-byte character, the C<SvUTF8> flag is turned on so that it looks like a character. If the PV contains only single-byte characters, the C<SvUTF8> flag stays off. Scans PV for validity and returns FALSE if the PV is invalid UTF-8. bool sv_utf8_decode(SV *const sv) =for hackers Found in file sv.c =item sv_utf8_downgrade X<sv_utf8_downgrade> Attempts to convert the PV of an SV from characters to bytes. If the PV contains a character that cannot fit in a byte, this conversion will fail; in this case, either returns false or, if C<fail_ok> is not true, croaks. This is not a general purpose Unicode to byte encoding interface: use the C<Encode> extension for that. This function process get magic on C<sv>. bool sv_utf8_downgrade(SV *const sv, const bool fail_ok) =for hackers Found in file sv.c =item sv_utf8_downgrade_flags X<sv_utf8_downgrade_flags> Like C<sv_utf8_downgrade>, but with additional C<flags>. If C<flags> has C<SV_GMAGIC> bit set, processes get magic on C<sv>. bool sv_utf8_downgrade_flags(SV *const sv, const bool fail_ok, const U32 flags) =for hackers Found in file sv.c =item sv_utf8_downgrade_nomg X<sv_utf8_downgrade_nomg> Like C<sv_utf8_downgrade>, but does not process get magic on C<sv>. bool sv_utf8_downgrade_nomg(SV *const sv, const bool fail_ok) =for hackers Found in file sv.c =item sv_utf8_encode X<sv_utf8_encode> Converts the PV of an SV to UTF-8, but then turns the C<SvUTF8> flag off so that it looks like octets again. void sv_utf8_encode(SV *const sv) =for hackers Found in file sv.c =item sv_utf8_upgrade X<sv_utf8_upgrade> Converts the PV of an SV to its UTF-8-encoded form. Forces the SV to string form if it is not already. Will C<mg_get> on C<sv> if appropriate. Always sets the C<SvUTF8> flag to avoid future validity checks even if the whole string is the same in UTF-8 as not. Returns the number of bytes in the converted string This is not a general purpose byte encoding to Unicode interface: use the Encode extension for that. STRLEN sv_utf8_upgrade(SV *sv) =for hackers Found in file sv.c =item sv_utf8_upgrade_flags X<sv_utf8_upgrade_flags> Converts the PV of an SV to its UTF-8-encoded form. Forces the SV to string form if it is not already. Always sets the SvUTF8 flag to avoid future validity checks even if all the bytes are invariant in UTF-8. If C<flags> has C<SV_GMAGIC> bit set, will C<mg_get> on C<sv> if appropriate, else not. The C<SV_FORCE_UTF8_UPGRADE> flag is now ignored. Returns the number of bytes in the converted string. This is not a general purpose byte encoding to Unicode interface: use the Encode extension for that. STRLEN sv_utf8_upgrade_flags(SV *const sv, const I32 flags) =for hackers Found in file sv.c =item sv_utf8_upgrade_flags_grow X<sv_utf8_upgrade_flags_grow> Like C<sv_utf8_upgrade_flags>, but has an additional parameter C<extra>, which is the number of unused bytes the string of C<sv> is guaranteed to have free after it upon return. This allows the caller to reserve extra space that it intends to fill, to avoid extra grows. C<sv_utf8_upgrade>, C<sv_utf8_upgrade_nomg>, and C<sv_utf8_upgrade_flags> are implemented in terms of this function. Returns the number of bytes in the converted string (not including the spares). STRLEN sv_utf8_upgrade_flags_grow(SV *const sv, const I32 flags, STRLEN extra) =for hackers Found in file sv.c =item sv_utf8_upgrade_nomg X<sv_utf8_upgrade_nomg> Like C<sv_utf8_upgrade>, but doesn't do magic on C<sv>. STRLEN sv_utf8_upgrade_nomg(SV *sv) =for hackers Found in file sv.c =item SvUTF8_off X<SvUTF8_off> Unsets the UTF-8 status of an SV (the data is not changed, just the flag). Do not use frivolously. void SvUTF8_off(SV *sv) =for hackers Found in file sv.h =item SvUTF8_on X<SvUTF8_on> Turn on the UTF-8 status of an SV (the data is not changed, just the flag). Do not use frivolously. void SvUTF8_on(SV *sv) =for hackers Found in file sv.h =item SvUV X<SvUV> Coerces the given SV to UV and returns it. The returned value in many circumstances will get stored in C<sv>'s UV slot, but not in all cases. (Use C<L</sv_setuv>> to make sure it does). See C<L</SvUVx>> for a version which guarantees to evaluate C<sv> only once. UV SvUV(SV* sv) =for hackers Found in file sv.h =item SvUV_nomg X<SvUV_nomg> Like C<SvUV> but doesn't process magic. UV SvUV_nomg(SV* sv) =for hackers Found in file sv.h =item SvUV_set X<SvUV_set> Set the value of the UV pointer in C<sv> to val. See C<L</SvIV_set>>. void SvUV_set(SV* sv, UV val) =for hackers Found in file sv.h =item SvUVX X<SvUVX> Returns the raw value in the SV's UV slot, without checks or conversions. Only use when you are sure C<SvIOK> is true. See also C<L</SvUV>>. UV SvUVX(SV* sv) =for hackers Found in file sv.h =item SvUVx X<SvUVx> Coerces the given SV to UV and returns it. The returned value in many circumstances will get stored in C<sv>'s UV slot, but not in all cases. (Use C<L</sv_setuv>> to make sure it does). This form guarantees to evaluate C<sv> only once. Only use this if C<sv> is an expression with side effects, otherwise use the more efficient C<SvUV>. UV SvUVx(SV* sv) =for hackers Found in file sv.h =item SvUVXx X<SvUVXx> DEPRECATED! It is planned to remove this function from a future release of Perl. Do not use it for new code; remove it from existing code. This is an unnecessary synonym for L</SvUVX> UV SvUVXx(SV* sv) =for hackers Found in file sv.h =item sv_vcatpvf X<sv_vcatpvf> Processes its arguments like C<sv_vcatpvfn> called with a non-null C-style variable argument list, and appends the formatted output to an SV. Does not handle 'set' magic. See C<L</sv_vcatpvf_mg>>. Usually used via its frontend C<sv_catpvf>. void sv_vcatpvf(SV *const sv, const char *const pat, va_list *const args) =for hackers Found in file sv.c =item sv_vcatpvfn X<sv_vcatpvfn> void sv_vcatpvfn(SV *const sv, const char *const pat, const STRLEN patlen, va_list *const args, SV **const svargs, const Size_t sv_count, bool *const maybe_tainted) =for hackers Found in file sv.c =item sv_vcatpvfn_flags X<sv_vcatpvfn_flags> Processes its arguments like C<vsprintf> and appends the formatted output to an SV. Uses an array of SVs if the C-style variable argument list is missing (C<NULL>). Argument reordering (using format specifiers like C<%2$d> or C<%*2$d>) is supported only when using an array of SVs; using a C-style C<va_list> argument list with a format string that uses argument reordering will yield an exception. When running with taint checks enabled, indicates via C<maybe_tainted> if results are untrustworthy (often due to the use of locales). If called as C<sv_vcatpvfn> or flags has the C<SV_GMAGIC> bit set, calls get magic. It assumes that pat has the same utf8-ness as sv. It's the caller's responsibility to ensure that this is so. Usually used via one of its frontends C<sv_vcatpvf> and C<sv_vcatpvf_mg>. void sv_vcatpvfn_flags(SV *const sv, const char *const pat, const STRLEN patlen, va_list *const args, SV **const svargs, const Size_t sv_count, bool *const maybe_tainted, const U32 flags) =for hackers Found in file sv.c =item sv_vcatpvf_mg X<sv_vcatpvf_mg> Like C<sv_vcatpvf>, but also handles 'set' magic. Usually used via its frontend C<sv_catpvf_mg>. void sv_vcatpvf_mg(SV *const sv, const char *const pat, va_list *const args) =for hackers Found in file sv.c =item SvVOK X<SvVOK> Returns a boolean indicating whether the SV contains a v-string. bool SvVOK(SV* sv) =for hackers Found in file sv.h =item sv_vsetpvf X<sv_vsetpvf> Works like C<sv_vcatpvf> but copies the text into the SV instead of appending it. Does not handle 'set' magic. See C<L</sv_vsetpvf_mg>>. Usually used via its frontend C<sv_setpvf>. void sv_vsetpvf(SV *const sv, const char *const pat, va_list *const args) =for hackers Found in file sv.c =item sv_vsetpvfn X<sv_vsetpvfn> Works like C<sv_vcatpvfn> but copies the text into the SV instead of appending it. Usually used via one of its frontends C<sv_vsetpvf> and C<sv_vsetpvf_mg>. void sv_vsetpvfn(SV *const sv, const char *const pat, const STRLEN patlen, va_list *const args, SV **const svargs, const Size_t sv_count, bool *const maybe_tainted) =for hackers Found in file sv.c =item sv_vsetpvf_mg X<sv_vsetpvf_mg> Like C<sv_vsetpvf>, but also handles 'set' magic. Usually used via its frontend C<sv_setpvf_mg>. void sv_vsetpvf_mg(SV *const sv, const char *const pat, va_list *const args) =for hackers Found in file sv.c =back =head1 Unicode Support L<perlguts/Unicode Support> has an introduction to this API. See also L</Character classification>, and L</Character case changing>. Various functions outside this section also work specially with Unicode. Search for the string "utf8" in this document. =over 8 =item BOM_UTF8 X<BOM_UTF8> This is a macro that evaluates to a string constant of the UTF-8 bytes that define the Unicode BYTE ORDER MARK (U+FEFF) for the platform that perl is compiled on. This allows code to use a mnemonic for this character that works on both ASCII and EBCDIC platforms. S<C<sizeof(BOM_UTF8) - 1>> can be used to get its length in bytes. =for hackers Found in file unicode_constants.h =item bytes_cmp_utf8 X<bytes_cmp_utf8> Compares the sequence of characters (stored as octets) in C<b>, C<blen> with the sequence of characters (stored as UTF-8) in C<u>, C<ulen>. Returns 0 if they are equal, -1 or -2 if the first string is less than the second string, +1 or +2 if the first string is greater than the second string. -1 or +1 is returned if the shorter string was identical to the start of the longer string. -2 or +2 is returned if there was a difference between characters within the strings. int bytes_cmp_utf8(const U8 *b, STRLEN blen, const U8 *u, STRLEN ulen) =for hackers Found in file utf8.c =item bytes_from_utf8 X<bytes_from_utf8> NOTE: this function is experimental and may change or be removed without notice. Converts a potentially UTF-8 encoded string C<s> of length C<*lenp> into native byte encoding. On input, the boolean C<*is_utf8p> gives whether or not C<s> is actually encoded in UTF-8. Unlike L</utf8_to_bytes> but like L</bytes_to_utf8>, this is non-destructive of the input string. Do nothing if C<*is_utf8p> is 0, or if there are code points in the string not expressible in native byte encoding. In these cases, C<*is_utf8p> and C<*lenp> are unchanged, and the return value is the original C<s>. Otherwise, C<*is_utf8p> is set to 0, and the return value is a pointer to a newly created string containing a downgraded copy of C<s>, and whose length is returned in C<*lenp>, updated. The new string is C<NUL>-terminated. The caller is responsible for arranging for the memory used by this string to get freed. Upon successful return, the number of variants in the string can be computed by having saved the value of C<*lenp> before the call, and subtracting the after-call value of C<*lenp> from it. U8* bytes_from_utf8(const U8 *s, STRLEN *lenp, bool *is_utf8p) =for hackers Found in file utf8.c =item bytes_to_utf8 X<bytes_to_utf8> NOTE: this function is experimental and may change or be removed without notice. Converts a string C<s> of length C<*lenp> bytes from the native encoding into UTF-8. Returns a pointer to the newly-created string, and sets C<*lenp> to reflect the new length in bytes. The caller is responsible for arranging for the memory used by this string to get freed. Upon successful return, the number of variants in the string can be computed by having saved the value of C<*lenp> before the call, and subtracting it from the after-call value of C<*lenp>. A C<NUL> character will be written after the end of the string. If you want to convert to UTF-8 from encodings other than the native (Latin1 or EBCDIC), see L</sv_recode_to_utf8>(). U8* bytes_to_utf8(const U8 *s, STRLEN *lenp) =for hackers Found in file utf8.c =item DO_UTF8 X<DO_UTF8> Returns a bool giving whether or not the PV in C<sv> is to be treated as being encoded in UTF-8. You should use this I<after> a call to C<SvPV()> or one of its variants, in case any call to string overloading updates the internal UTF-8 encoding flag. bool DO_UTF8(SV* sv) =for hackers Found in file utf8.h =item foldEQ_utf8 X<foldEQ_utf8> Returns true if the leading portions of the strings C<s1> and C<s2> (either or both of which may be in UTF-8) are the same case-insensitively; false otherwise. How far into the strings to compare is determined by other input parameters. If C<u1> is true, the string C<s1> is assumed to be in UTF-8-encoded Unicode; otherwise it is assumed to be in native 8-bit encoding. Correspondingly for C<u2> with respect to C<s2>. If the byte length C<l1> is non-zero, it says how far into C<s1> to check for fold equality. In other words, C<s1>+C<l1> will be used as a goal to reach. The scan will not be considered to be a match unless the goal is reached, and scanning won't continue past that goal. Correspondingly for C<l2> with respect to C<s2>. If C<pe1> is non-C<NULL> and the pointer it points to is not C<NULL>, that pointer is considered an end pointer to the position 1 byte past the maximum point in C<s1> beyond which scanning will not continue under any circumstances. (This routine assumes that UTF-8 encoded input strings are not malformed; malformed input can cause it to read past C<pe1>). This means that if both C<l1> and C<pe1> are specified, and C<pe1> is less than C<s1>+C<l1>, the match will never be successful because it can never get as far as its goal (and in fact is asserted against). Correspondingly for C<pe2> with respect to C<s2>. At least one of C<s1> and C<s2> must have a goal (at least one of C<l1> and C<l2> must be non-zero), and if both do, both have to be reached for a successful match. Also, if the fold of a character is multiple characters, all of them must be matched (see tr21 reference below for 'folding'). Upon a successful match, if C<pe1> is non-C<NULL>, it will be set to point to the beginning of the I<next> character of C<s1> beyond what was matched. Correspondingly for C<pe2> and C<s2>. For case-insensitiveness, the "casefolding" of Unicode is used instead of upper/lowercasing both the characters, see L<https://www.unicode.org/unicode/reports/tr21/> (Case Mappings). I32 foldEQ_utf8(const char *s1, char **pe1, UV l1, bool u1, const char *s2, char **pe2, UV l2, bool u2) =for hackers Found in file utf8.c =item is_ascii_string X<is_ascii_string> This is a misleadingly-named synonym for L</is_utf8_invariant_string>. On ASCII-ish platforms, the name isn't misleading: the ASCII-range characters are exactly the UTF-8 invariants. But EBCDIC machines have more invariants than just the ASCII characters, so C<is_utf8_invariant_string> is preferred. bool is_ascii_string(const U8* const s, STRLEN len) =for hackers Found in file utf8.h =item is_c9strict_utf8_string X<is_c9strict_utf8_string> Returns TRUE if the first C<len> bytes of string C<s> form a valid UTF-8-encoded string that conforms to L<Unicode Corrigendum #9|http://www.unicode.org/versions/corrigendum9.html>; otherwise it returns FALSE. If C<len> is 0, it will be calculated using C<strlen(s)> (which means if you use this option, that C<s> can't have embedded C<NUL> characters and has to have a terminating C<NUL> byte). Note that all characters being ASCII constitute 'a valid UTF-8 string'. This function returns FALSE for strings containing any code points above the Unicode max of 0x10FFFF or surrogate code points, but accepts non-character code points per L<Corrigendum #9|http://www.unicode.org/versions/corrigendum9.html>. See also C<L</is_utf8_invariant_string>>, C<L</is_utf8_invariant_string_loc>>, C<L</is_utf8_string>>, C<L</is_utf8_string_flags>>, C<L</is_utf8_string_loc>>, C<L</is_utf8_string_loc_flags>>, C<L</is_utf8_string_loclen>>, C<L</is_utf8_string_loclen_flags>>, C<L</is_utf8_fixed_width_buf_flags>>, C<L</is_utf8_fixed_width_buf_loc_flags>>, C<L</is_utf8_fixed_width_buf_loclen_flags>>, C<L</is_strict_utf8_string>>, C<L</is_strict_utf8_string_loc>>, C<L</is_strict_utf8_string_loclen>>, C<L</is_c9strict_utf8_string_loc>>, and C<L</is_c9strict_utf8_string_loclen>>. bool is_c9strict_utf8_string(const U8 *s, STRLEN len) =for hackers Found in file inline.h =item is_c9strict_utf8_string_loc X<is_c9strict_utf8_string_loc> Like C<L</is_c9strict_utf8_string>> but stores the location of the failure (in the case of "utf8ness failure") or the location C<s>+C<len> (in the case of "utf8ness success") in the C<ep> pointer. See also C<L</is_c9strict_utf8_string_loclen>>. bool is_c9strict_utf8_string_loc(const U8 *s, STRLEN len, const U8 **ep) =for hackers Found in file inline.h =item is_c9strict_utf8_string_loclen X<is_c9strict_utf8_string_loclen> Like C<L</is_c9strict_utf8_string>> but stores the location of the failure (in the case of "utf8ness failure") or the location C<s>+C<len> (in the case of "utf8ness success") in the C<ep> pointer, and the number of UTF-8 encoded characters in the C<el> pointer. See also C<L</is_c9strict_utf8_string_loc>>. bool is_c9strict_utf8_string_loclen(const U8 *s, STRLEN len, const U8 **ep, STRLEN *el) =for hackers Found in file inline.h =item isC9_STRICT_UTF8_CHAR X<isC9_STRICT_UTF8_CHAR> Evaluates to non-zero if the first few bytes of the string starting at C<s> and looking no further than S<C<e - 1>> are well-formed UTF-8 that represents some Unicode non-surrogate code point; otherwise it evaluates to 0. If non-zero, the value gives how many bytes starting at C<s> comprise the code point's representation. Any bytes remaining before C<e>, but beyond the ones needed to form the first code point in C<s>, are not examined. The largest acceptable code point is the Unicode maximum 0x10FFFF. This differs from C<L</isSTRICT_UTF8_CHAR>> only in that it accepts non-character code points. This corresponds to L<Unicode Corrigendum #9|http://www.unicode.org/versions/corrigendum9.html>. which said that non-character code points are merely discouraged rather than completely forbidden in open interchange. See L<perlunicode/Noncharacter code points>. Use C<L</isUTF8_CHAR>> to check for Perl's extended UTF-8; and C<L</isUTF8_CHAR_flags>> for a more customized definition. Use C<L</is_c9strict_utf8_string>>, C<L</is_c9strict_utf8_string_loc>>, and C<L</is_c9strict_utf8_string_loclen>> to check entire strings. Size_t isC9_STRICT_UTF8_CHAR(const U8 * const s0, const U8 * const e) =for hackers Found in file inline.h =item is_invariant_string X<is_invariant_string> This is a somewhat misleadingly-named synonym for L</is_utf8_invariant_string>. C<is_utf8_invariant_string> is preferred, as it indicates under what conditions the string is invariant. bool is_invariant_string(const U8* const s, STRLEN len) =for hackers Found in file utf8.h =item isSTRICT_UTF8_CHAR X<isSTRICT_UTF8_CHAR> Evaluates to non-zero if the first few bytes of the string starting at C<s> and looking no further than S<C<e - 1>> are well-formed UTF-8 that represents some Unicode code point completely acceptable for open interchange between all applications; otherwise it evaluates to 0. If non-zero, the value gives how many bytes starting at C<s> comprise the code point's representation. Any bytes remaining before C<e>, but beyond the ones needed to form the first code point in C<s>, are not examined. The largest acceptable code point is the Unicode maximum 0x10FFFF, and must not be a surrogate nor a non-character code point. Thus this excludes any code point from Perl's extended UTF-8. This is used to efficiently decide if the next few bytes in C<s> is legal Unicode-acceptable UTF-8 for a single character. Use C<L</isC9_STRICT_UTF8_CHAR>> to use the L<Unicode Corrigendum #9|http://www.unicode.org/versions/corrigendum9.html> definition of allowable code points; C<L</isUTF8_CHAR>> to check for Perl's extended UTF-8; and C<L</isUTF8_CHAR_flags>> for a more customized definition. Use C<L</is_strict_utf8_string>>, C<L</is_strict_utf8_string_loc>>, and C<L</is_strict_utf8_string_loclen>> to check entire strings. Size_t isSTRICT_UTF8_CHAR(const U8 * const s0, const U8 * const e) =for hackers Found in file inline.h =item is_strict_utf8_string X<is_strict_utf8_string> Returns TRUE if the first C<len> bytes of string C<s> form a valid UTF-8-encoded string that is fully interchangeable by any application using Unicode rules; otherwise it returns FALSE. If C<len> is 0, it will be calculated using C<strlen(s)> (which means if you use this option, that C<s> can't have embedded C<NUL> characters and has to have a terminating C<NUL> byte). Note that all characters being ASCII constitute 'a valid UTF-8 string'. This function returns FALSE for strings containing any code points above the Unicode max of 0x10FFFF, surrogate code points, or non-character code points. See also C<L</is_utf8_invariant_string>>, C<L</is_utf8_invariant_string_loc>>, C<L</is_utf8_string>>, C<L</is_utf8_string_flags>>, C<L</is_utf8_string_loc>>, C<L</is_utf8_string_loc_flags>>, C<L</is_utf8_string_loclen>>, C<L</is_utf8_string_loclen_flags>>, C<L</is_utf8_fixed_width_buf_flags>>, C<L</is_utf8_fixed_width_buf_loc_flags>>, C<L</is_utf8_fixed_width_buf_loclen_flags>>, C<L</is_strict_utf8_string_loc>>, C<L</is_strict_utf8_string_loclen>>, C<L</is_c9strict_utf8_string>>, C<L</is_c9strict_utf8_string_loc>>, and C<L</is_c9strict_utf8_string_loclen>>. bool is_strict_utf8_string(const U8 *s, STRLEN len) =for hackers Found in file inline.h =item is_strict_utf8_string_loc X<is_strict_utf8_string_loc> Like C<L</is_strict_utf8_string>> but stores the location of the failure (in the case of "utf8ness failure") or the location C<s>+C<len> (in the case of "utf8ness success") in the C<ep> pointer. See also C<L</is_strict_utf8_string_loclen>>. bool is_strict_utf8_string_loc(const U8 *s, STRLEN len, const U8 **ep) =for hackers Found in file inline.h =item is_strict_utf8_string_loclen X<is_strict_utf8_string_loclen> Like C<L</is_strict_utf8_string>> but stores the location of the failure (in the case of "utf8ness failure") or the location C<s>+C<len> (in the case of "utf8ness success") in the C<ep> pointer, and the number of UTF-8 encoded characters in the C<el> pointer. See also C<L</is_strict_utf8_string_loc>>. bool is_strict_utf8_string_loclen(const U8 *s, STRLEN len, const U8 **ep, STRLEN *el) =for hackers Found in file inline.h =item is_utf8_fixed_width_buf_flags X<is_utf8_fixed_width_buf_flags> Returns TRUE if the fixed-width buffer starting at C<s> with length C<len> is entirely valid UTF-8, subject to the restrictions given by C<flags>; otherwise it returns FALSE. If C<flags> is 0, any well-formed UTF-8, as extended by Perl, is accepted without restriction. If the final few bytes of the buffer do not form a complete code point, this will return TRUE anyway, provided that C<L</is_utf8_valid_partial_char_flags>> returns TRUE for them. If C<flags> in non-zero, it can be any combination of the C<UTF8_DISALLOW_I<foo>> flags accepted by C<L</utf8n_to_uvchr>>, and with the same meanings. This function differs from C<L</is_utf8_string_flags>> only in that the latter returns FALSE if the final few bytes of the string don't form a complete code point. bool is_utf8_fixed_width_buf_flags( const U8 * const s, STRLEN len, const U32 flags ) =for hackers Found in file inline.h =item is_utf8_fixed_width_buf_loclen_flags X<is_utf8_fixed_width_buf_loclen_flags> Like C<L</is_utf8_fixed_width_buf_loc_flags>> but stores the number of complete, valid characters found in the C<el> pointer. bool is_utf8_fixed_width_buf_loclen_flags( const U8 * const s, STRLEN len, const U8 **ep, STRLEN *el, const U32 flags ) =for hackers Found in file inline.h =item is_utf8_fixed_width_buf_loc_flags X<is_utf8_fixed_width_buf_loc_flags> Like C<L</is_utf8_fixed_width_buf_flags>> but stores the location of the failure in the C<ep> pointer. If the function returns TRUE, C<*ep> will point to the beginning of any partial character at the end of the buffer; if there is no partial character C<*ep> will contain C<s>+C<len>. See also C<L</is_utf8_fixed_width_buf_loclen_flags>>. bool is_utf8_fixed_width_buf_loc_flags( const U8 * const s, STRLEN len, const U8 **ep, const U32 flags ) =for hackers Found in file inline.h =item is_utf8_invariant_string X<is_utf8_invariant_string> Returns TRUE if the first C<len> bytes of the string C<s> are the same regardless of the UTF-8 encoding of the string (or UTF-EBCDIC encoding on EBCDIC machines); otherwise it returns FALSE. That is, it returns TRUE if they are UTF-8 invariant. On ASCII-ish machines, all the ASCII characters and only the ASCII characters fit this definition. On EBCDIC machines, the ASCII-range characters are invariant, but so also are the C1 controls. If C<len> is 0, it will be calculated using C<strlen(s)>, (which means if you use this option, that C<s> can't have embedded C<NUL> characters and has to have a terminating C<NUL> byte). See also C<L</is_utf8_string>>, C<L</is_utf8_string_flags>>, C<L</is_utf8_string_loc>>, C<L</is_utf8_string_loc_flags>>, C<L</is_utf8_string_loclen>>, C<L</is_utf8_string_loclen_flags>>, C<L</is_utf8_fixed_width_buf_flags>>, C<L</is_utf8_fixed_width_buf_loc_flags>>, C<L</is_utf8_fixed_width_buf_loclen_flags>>, C<L</is_strict_utf8_string>>, C<L</is_strict_utf8_string_loc>>, C<L</is_strict_utf8_string_loclen>>, C<L</is_c9strict_utf8_string>>, C<L</is_c9strict_utf8_string_loc>>, and C<L</is_c9strict_utf8_string_loclen>>. bool is_utf8_invariant_string(const U8* const s, STRLEN len) =for hackers Found in file inline.h =item is_utf8_invariant_string_loc X<is_utf8_invariant_string_loc> Like C<L</is_utf8_invariant_string>> but upon failure, stores the location of the first UTF-8 variant character in the C<ep> pointer; if all characters are UTF-8 invariant, this function does not change the contents of C<*ep>. bool is_utf8_invariant_string_loc(const U8* const s, STRLEN len, const U8 ** ep) =for hackers Found in file inline.h =item is_utf8_string X<is_utf8_string> Returns TRUE if the first C<len> bytes of string C<s> form a valid Perl-extended-UTF-8 string; returns FALSE otherwise. If C<len> is 0, it will be calculated using C<strlen(s)> (which means if you use this option, that C<s> can't have embedded C<NUL> characters and has to have a terminating C<NUL> byte). Note that all characters being ASCII constitute 'a valid UTF-8 string'. This function considers Perl's extended UTF-8 to be valid. That means that code points above Unicode, surrogates, and non-character code points are considered valid by this function. Use C<L</is_strict_utf8_string>>, C<L</is_c9strict_utf8_string>>, or C<L</is_utf8_string_flags>> to restrict what code points are considered valid. See also C<L</is_utf8_invariant_string>>, C<L</is_utf8_invariant_string_loc>>, C<L</is_utf8_string_loc>>, C<L</is_utf8_string_loclen>>, C<L</is_utf8_fixed_width_buf_flags>>, C<L</is_utf8_fixed_width_buf_loc_flags>>, C<L</is_utf8_fixed_width_buf_loclen_flags>>, bool is_utf8_string(const U8 *s, STRLEN len) =for hackers Found in file inline.h =item is_utf8_string_flags X<is_utf8_string_flags> Returns TRUE if the first C<len> bytes of string C<s> form a valid UTF-8 string, subject to the restrictions imposed by C<flags>; returns FALSE otherwise. If C<len> is 0, it will be calculated using C<strlen(s)> (which means if you use this option, that C<s> can't have embedded C<NUL> characters and has to have a terminating C<NUL> byte). Note that all characters being ASCII constitute 'a valid UTF-8 string'. If C<flags> is 0, this gives the same results as C<L</is_utf8_string>>; if C<flags> is C<UTF8_DISALLOW_ILLEGAL_INTERCHANGE>, this gives the same results as C<L</is_strict_utf8_string>>; and if C<flags> is C<UTF8_DISALLOW_ILLEGAL_C9_INTERCHANGE>, this gives the same results as C<L</is_c9strict_utf8_string>>. Otherwise C<flags> may be any combination of the C<UTF8_DISALLOW_I<foo>> flags understood by C<L</utf8n_to_uvchr>>, with the same meanings. See also C<L</is_utf8_invariant_string>>, C<L</is_utf8_invariant_string_loc>>, C<L</is_utf8_string>>, C<L</is_utf8_string_loc>>, C<L</is_utf8_string_loc_flags>>, C<L</is_utf8_string_loclen>>, C<L</is_utf8_string_loclen_flags>>, C<L</is_utf8_fixed_width_buf_flags>>, C<L</is_utf8_fixed_width_buf_loc_flags>>, C<L</is_utf8_fixed_width_buf_loclen_flags>>, C<L</is_strict_utf8_string>>, C<L</is_strict_utf8_string_loc>>, C<L</is_strict_utf8_string_loclen>>, C<L</is_c9strict_utf8_string>>, C<L</is_c9strict_utf8_string_loc>>, and C<L</is_c9strict_utf8_string_loclen>>. bool is_utf8_string_flags(const U8 *s, STRLEN len, const U32 flags) =for hackers Found in file inline.h =item is_utf8_string_loc X<is_utf8_string_loc> Like C<L</is_utf8_string>> but stores the location of the failure (in the case of "utf8ness failure") or the location C<s>+C<len> (in the case of "utf8ness success") in the C<ep> pointer. See also C<L</is_utf8_string_loclen>>. bool is_utf8_string_loc(const U8 *s, const STRLEN len, const U8 **ep) =for hackers Found in file inline.h =item is_utf8_string_loclen X<is_utf8_string_loclen> Like C<L</is_utf8_string>> but stores the location of the failure (in the case of "utf8ness failure") or the location C<s>+C<len> (in the case of "utf8ness success") in the C<ep> pointer, and the number of UTF-8 encoded characters in the C<el> pointer. See also C<L</is_utf8_string_loc>>. bool is_utf8_string_loclen(const U8 *s, STRLEN len, const U8 **ep, STRLEN *el) =for hackers Found in file inline.h =item is_utf8_string_loclen_flags X<is_utf8_string_loclen_flags> Like C<L</is_utf8_string_flags>> but stores the location of the failure (in the case of "utf8ness failure") or the location C<s>+C<len> (in the case of "utf8ness success") in the C<ep> pointer, and the number of UTF-8 encoded characters in the C<el> pointer. See also C<L</is_utf8_string_loc_flags>>. bool is_utf8_string_loclen_flags(const U8 *s, STRLEN len, const U8 **ep, STRLEN *el, const U32 flags) =for hackers Found in file inline.h =item is_utf8_string_loc_flags X<is_utf8_string_loc_flags> Like C<L</is_utf8_string_flags>> but stores the location of the failure (in the case of "utf8ness failure") or the location C<s>+C<len> (in the case of "utf8ness success") in the C<ep> pointer. See also C<L</is_utf8_string_loclen_flags>>. bool is_utf8_string_loc_flags(const U8 *s, STRLEN len, const U8 **ep, const U32 flags) =for hackers Found in file inline.h =item is_utf8_valid_partial_char X<is_utf8_valid_partial_char> Returns 0 if the sequence of bytes starting at C<s> and looking no further than S<C<e - 1>> is the UTF-8 encoding, as extended by Perl, for one or more code points. Otherwise, it returns 1 if there exists at least one non-empty sequence of bytes that when appended to sequence C<s>, starting at position C<e> causes the entire sequence to be the well-formed UTF-8 of some code point; otherwise returns 0. In other words this returns TRUE if C<s> points to a partial UTF-8-encoded code point. This is useful when a fixed-length buffer is being tested for being well-formed UTF-8, but the final few bytes in it don't comprise a full character; that is, it is split somewhere in the middle of the final code point's UTF-8 representation. (Presumably when the buffer is refreshed with the next chunk of data, the new first bytes will complete the partial code point.) This function is used to verify that the final bytes in the current buffer are in fact the legal beginning of some code point, so that if they aren't, the failure can be signalled without having to wait for the next read. bool is_utf8_valid_partial_char(const U8 * const s, const U8 * const e) =for hackers Found in file inline.h =item is_utf8_valid_partial_char_flags X<is_utf8_valid_partial_char_flags> Like C<L</is_utf8_valid_partial_char>>, it returns a boolean giving whether or not the input is a valid UTF-8 encoded partial character, but it takes an extra parameter, C<flags>, which can further restrict which code points are considered valid. If C<flags> is 0, this behaves identically to C<L</is_utf8_valid_partial_char>>. Otherwise C<flags> can be any combination of the C<UTF8_DISALLOW_I<foo>> flags accepted by C<L</utf8n_to_uvchr>>. If there is any sequence of bytes that can complete the input partial character in such a way that a non-prohibited character is formed, the function returns TRUE; otherwise FALSE. Non character code points cannot be determined based on partial character input. But many of the other possible excluded types can be determined from just the first one or two bytes. bool is_utf8_valid_partial_char_flags( const U8 * const s, const U8 * const e, const U32 flags ) =for hackers Found in file inline.h =item isUTF8_CHAR X<isUTF8_CHAR> Evaluates to non-zero if the first few bytes of the string starting at C<s> and looking no further than S<C<e - 1>> are well-formed UTF-8, as extended by Perl, that represents some code point; otherwise it evaluates to 0. If non-zero, the value gives how many bytes starting at C<s> comprise the code point's representation. Any bytes remaining before C<e>, but beyond the ones needed to form the first code point in C<s>, are not examined. The code point can be any that will fit in an IV on this machine, using Perl's extension to official UTF-8 to represent those higher than the Unicode maximum of 0x10FFFF. That means that this macro is used to efficiently decide if the next few bytes in C<s> is legal UTF-8 for a single character. Use C<L</isSTRICT_UTF8_CHAR>> to restrict the acceptable code points to those defined by Unicode to be fully interchangeable across applications; C<L</isC9_STRICT_UTF8_CHAR>> to use the L<Unicode Corrigendum #9|http://www.unicode.org/versions/corrigendum9.html> definition of allowable code points; and C<L</isUTF8_CHAR_flags>> for a more customized definition. Use C<L</is_utf8_string>>, C<L</is_utf8_string_loc>>, and C<L</is_utf8_string_loclen>> to check entire strings. Note also that a UTF-8 "invariant" character (i.e. ASCII on non-EBCDIC machines) is a valid UTF-8 character. Size_t isUTF8_CHAR(const U8 * const s0, const U8 * const e) =for hackers Found in file inline.h =item isUTF8_CHAR_flags X<isUTF8_CHAR_flags> Evaluates to non-zero if the first few bytes of the string starting at C<s> and looking no further than S<C<e - 1>> are well-formed UTF-8, as extended by Perl, that represents some code point, subject to the restrictions given by C<flags>; otherwise it evaluates to 0. If non-zero, the value gives how many bytes starting at C<s> comprise the code point's representation. Any bytes remaining before C<e>, but beyond the ones needed to form the first code point in C<s>, are not examined. If C<flags> is 0, this gives the same results as C<L</isUTF8_CHAR>>; if C<flags> is C<UTF8_DISALLOW_ILLEGAL_INTERCHANGE>, this gives the same results as C<L</isSTRICT_UTF8_CHAR>>; and if C<flags> is C<UTF8_DISALLOW_ILLEGAL_C9_INTERCHANGE>, this gives the same results as C<L</isC9_STRICT_UTF8_CHAR>>. Otherwise C<flags> may be any combination of the C<UTF8_DISALLOW_I<foo>> flags understood by C<L</utf8n_to_uvchr>>, with the same meanings. The three alternative macros are for the most commonly needed validations; they are likely to run somewhat faster than this more general one, as they can be inlined into your code. Use L</is_utf8_string_flags>, L</is_utf8_string_loc_flags>, and L</is_utf8_string_loclen_flags> to check entire strings. STRLEN isUTF8_CHAR_flags(const U8 *s, const U8 *e, const U32 flags) =for hackers Found in file utf8.h =item LATIN1_TO_NATIVE X<LATIN1_TO_NATIVE> Returns the native equivalent of the input Latin-1 code point (including ASCII and control characters) given by C<ch>. Thus, C<LATIN1_TO_NATIVE(66)> on EBCDIC platforms returns 194. These each represent the character C<"B"> on their respective platforms. On ASCII platforms no conversion is needed, so this macro expands to just its input, adding no time nor space requirements to the implementation. For conversion of code points potentially larger than will fit in a character, use L</UNI_TO_NATIVE>. U8 LATIN1_TO_NATIVE(U8 ch) =for hackers Found in file utf8.h =item NATIVE_TO_LATIN1 X<NATIVE_TO_LATIN1> Returns the Latin-1 (including ASCII and control characters) equivalent of the input native code point given by C<ch>. Thus, C<NATIVE_TO_LATIN1(193)> on EBCDIC platforms returns 65. These each represent the character C<"A"> on their respective platforms. On ASCII platforms no conversion is needed, so this macro expands to just its input, adding no time nor space requirements to the implementation. For conversion of code points potentially larger than will fit in a character, use L</NATIVE_TO_UNI>. U8 NATIVE_TO_LATIN1(U8 ch) =for hackers Found in file utf8.h =item NATIVE_TO_UNI X<NATIVE_TO_UNI> Returns the Unicode equivalent of the input native code point given by C<ch>. Thus, C<NATIVE_TO_UNI(195)> on EBCDIC platforms returns 67. These each represent the character C<"C"> on their respective platforms. On ASCII platforms no conversion is needed, so this macro expands to just its input, adding no time nor space requirements to the implementation. UV NATIVE_TO_UNI(UV ch) =for hackers Found in file utf8.h =item pv_uni_display X<pv_uni_display> Build to the scalar C<dsv> a displayable version of the UTF-8 encoded string C<spv>, length C<len>, the displayable version being at most C<pvlim> bytes long (if longer, the rest is truncated and C<"..."> will be appended). The C<flags> argument can have C<UNI_DISPLAY_ISPRINT> set to display C<isPRINT()>able characters as themselves, C<UNI_DISPLAY_BACKSLASH> to display the C<\\[nrfta\\]> as the backslashed versions (like C<"\n">) (C<UNI_DISPLAY_BACKSLASH> is preferred over C<UNI_DISPLAY_ISPRINT> for C<"\\">). C<UNI_DISPLAY_QQ> (and its alias C<UNI_DISPLAY_REGEX>) have both C<UNI_DISPLAY_BACKSLASH> and C<UNI_DISPLAY_ISPRINT> turned on. Additionally, there is now C<UNI_DISPLAY_BACKSPACE> which allows C<\b> for a backspace, but only when C<UNI_DISPLAY_BACKSLASH> also is set. The pointer to the PV of the C<dsv> is returned. See also L</sv_uni_display>. char* pv_uni_display(SV *dsv, const U8 *spv, STRLEN len, STRLEN pvlim, UV flags) =for hackers Found in file utf8.c =item REPLACEMENT_CHARACTER_UTF8 X<REPLACEMENT_CHARACTER_UTF8> This is a macro that evaluates to a string constant of the UTF-8 bytes that define the Unicode REPLACEMENT CHARACTER (U+FFFD) for the platform that perl is compiled on. This allows code to use a mnemonic for this character that works on both ASCII and EBCDIC platforms. S<C<sizeof(REPLACEMENT_CHARACTER_UTF8) - 1>> can be used to get its length in bytes. =for hackers Found in file unicode_constants.h =item sv_cat_decode X<sv_cat_decode> C<encoding> is assumed to be an C<Encode> object, the PV of C<ssv> is assumed to be octets in that encoding and decoding the input starts from the position which S<C<(PV + *offset)>> pointed to. C<dsv> will be concatenated with the decoded UTF-8 string from C<ssv>. Decoding will terminate when the string C<tstr> appears in decoding output or the input ends on the PV of C<ssv>. The value which C<offset> points will be modified to the last input position on C<ssv>. Returns TRUE if the terminator was found, else returns FALSE. bool sv_cat_decode(SV* dsv, SV *encoding, SV *ssv, int *offset, char* tstr, int tlen) =for hackers Found in file sv.c =item sv_recode_to_utf8 X<sv_recode_to_utf8> C<encoding> is assumed to be an C<Encode> object, on entry the PV of C<sv> is assumed to be octets in that encoding, and C<sv> will be converted into Unicode (and UTF-8). If C<sv> already is UTF-8 (or if it is not C<POK>), or if C<encoding> is not a reference, nothing is done to C<sv>. If C<encoding> is not an C<Encode::XS> Encoding object, bad things will happen. (See F<cpan/Encode/encoding.pm> and L<Encode>.) The PV of C<sv> is returned. char* sv_recode_to_utf8(SV* sv, SV *encoding) =for hackers Found in file sv.c =item sv_uni_display X<sv_uni_display> Build to the scalar C<dsv> a displayable version of the scalar C<sv>, the displayable version being at most C<pvlim> bytes long (if longer, the rest is truncated and "..." will be appended). The C<flags> argument is as in L</pv_uni_display>(). The pointer to the PV of the C<dsv> is returned. char* sv_uni_display(SV *dsv, SV *ssv, STRLEN pvlim, UV flags) =for hackers Found in file utf8.c =item UNICODE_REPLACEMENT X<UNICODE_REPLACEMENT> Evaluates to 0xFFFD, the code point of the Unicode REPLACEMENT CHARACTER =for hackers Found in file utf8.h =item UNI_TO_NATIVE X<UNI_TO_NATIVE> Returns the native equivalent of the input Unicode code point given by C<ch>. Thus, C<UNI_TO_NATIVE(68)> on EBCDIC platforms returns 196. These each represent the character C<"D"> on their respective platforms. On ASCII platforms no conversion is needed, so this macro expands to just its input, adding no time nor space requirements to the implementation. UV UNI_TO_NATIVE(UV ch) =for hackers Found in file utf8.h =item utf8n_to_uvchr X<utf8n_to_uvchr> THIS FUNCTION SHOULD BE USED IN ONLY VERY SPECIALIZED CIRCUMSTANCES. Most code should use L</utf8_to_uvchr_buf>() rather than call this directly. Bottom level UTF-8 decode routine. Returns the native code point value of the first character in the string C<s>, which is assumed to be in UTF-8 (or UTF-EBCDIC) encoding, and no longer than C<curlen> bytes; C<*retlen> (if C<retlen> isn't NULL) will be set to the length, in bytes, of that character. The value of C<flags> determines the behavior when C<s> does not point to a well-formed UTF-8 character. If C<flags> is 0, encountering a malformation causes zero to be returned and C<*retlen> is set so that (S<C<s> + C<*retlen>>) is the next possible position in C<s> that could begin a non-malformed character. Also, if UTF-8 warnings haven't been lexically disabled, a warning is raised. Some UTF-8 input sequences may contain multiple malformations. This function tries to find every possible one in each call, so multiple warnings can be raised for the same sequence. Various ALLOW flags can be set in C<flags> to allow (and not warn on) individual types of malformations, such as the sequence being overlong (that is, when there is a shorter sequence that can express the same code point; overlong sequences are expressly forbidden in the UTF-8 standard due to potential security issues). Another malformation example is the first byte of a character not being a legal first byte. See F<utf8.h> for the list of such flags. Even if allowed, this function generally returns the Unicode REPLACEMENT CHARACTER when it encounters a malformation. There are flags in F<utf8.h> to override this behavior for the overlong malformations, but don't do that except for very specialized purposes. The C<UTF8_CHECK_ONLY> flag overrides the behavior when a non-allowed (by other flags) malformation is found. If this flag is set, the routine assumes that the caller will raise a warning, and this function will silently just set C<retlen> to C<-1> (cast to C<STRLEN>) and return zero. Note that this API requires disambiguation between successful decoding a C<NUL> character, and an error return (unless the C<UTF8_CHECK_ONLY> flag is set), as in both cases, 0 is returned, and, depending on the malformation, C<retlen> may be set to 1. To disambiguate, upon a zero return, see if the first byte of C<s> is 0 as well. If so, the input was a C<NUL>; if not, the input had an error. Or you can use C<L</utf8n_to_uvchr_error>>. Certain code points are considered problematic. These are Unicode surrogates, Unicode non-characters, and code points above the Unicode maximum of 0x10FFFF. By default these are considered regular code points, but certain situations warrant special handling for them, which can be specified using the C<flags> parameter. If C<flags> contains C<UTF8_DISALLOW_ILLEGAL_INTERCHANGE>, all three classes are treated as malformations and handled as such. The flags C<UTF8_DISALLOW_SURROGATE>, C<UTF8_DISALLOW_NONCHAR>, and C<UTF8_DISALLOW_SUPER> (meaning above the legal Unicode maximum) can be set to disallow these categories individually. C<UTF8_DISALLOW_ILLEGAL_INTERCHANGE> restricts the allowed inputs to the strict UTF-8 traditionally defined by Unicode. Use C<UTF8_DISALLOW_ILLEGAL_C9_INTERCHANGE> to use the strictness definition given by L<Unicode Corrigendum #9|https://www.unicode.org/versions/corrigendum9.html>. The difference between traditional strictness and C9 strictness is that the latter does not forbid non-character code points. (They are still discouraged, however.) For more discussion see L<perlunicode/Noncharacter code points>. The flags C<UTF8_WARN_ILLEGAL_INTERCHANGE>, C<UTF8_WARN_ILLEGAL_C9_INTERCHANGE>, C<UTF8_WARN_SURROGATE>, C<UTF8_WARN_NONCHAR>, and C<UTF8_WARN_SUPER> will cause warning messages to be raised for their respective categories, but otherwise the code points are considered valid (not malformations). To get a category to both be treated as a malformation and raise a warning, specify both the WARN and DISALLOW flags. (But note that warnings are not raised if lexically disabled nor if C<UTF8_CHECK_ONLY> is also specified.) Extremely high code points were never specified in any standard, and require an extension to UTF-8 to express, which Perl does. It is likely that programs written in something other than Perl would not be able to read files that contain these; nor would Perl understand files written by something that uses a different extension. For these reasons, there is a separate set of flags that can warn and/or disallow these extremely high code points, even if other above-Unicode ones are accepted. They are the C<UTF8_WARN_PERL_EXTENDED> and C<UTF8_DISALLOW_PERL_EXTENDED> flags. For more information see L</C<UTF8_GOT_PERL_EXTENDED>>. Of course C<UTF8_DISALLOW_SUPER> will treat all above-Unicode code points, including these, as malformations. (Note that the Unicode standard considers anything above 0x10FFFF to be illegal, but there are standards predating it that allow up to 0x7FFF_FFFF (2**31 -1)) A somewhat misleadingly named synonym for C<UTF8_WARN_PERL_EXTENDED> is retained for backward compatibility: C<UTF8_WARN_ABOVE_31_BIT>. Similarly, C<UTF8_DISALLOW_ABOVE_31_BIT> is usable instead of the more accurately named C<UTF8_DISALLOW_PERL_EXTENDED>. The names are misleading because these flags can apply to code points that actually do fit in 31 bits. This happens on EBCDIC platforms, and sometimes when the L<overlong malformation|/C<UTF8_GOT_LONG>> is also present. The new names accurately describe the situation in all cases. All other code points corresponding to Unicode characters, including private use and those yet to be assigned, are never considered malformed and never warn. UV utf8n_to_uvchr(const U8 *s, STRLEN curlen, STRLEN *retlen, const U32 flags) =for hackers Found in file utf8.c =item utf8n_to_uvchr_error X<utf8n_to_uvchr_error> THIS FUNCTION SHOULD BE USED IN ONLY VERY SPECIALIZED CIRCUMSTANCES. Most code should use L</utf8_to_uvchr_buf>() rather than call this directly. This function is for code that needs to know what the precise malformation(s) are when an error is found. If you also need to know the generated warning messages, use L</utf8n_to_uvchr_msgs>() instead. It is like C<L</utf8n_to_uvchr>> but it takes an extra parameter placed after all the others, C<errors>. If this parameter is 0, this function behaves identically to C<L</utf8n_to_uvchr>>. Otherwise, C<errors> should be a pointer to a C<U32> variable, which this function sets to indicate any errors found. Upon return, if C<*errors> is 0, there were no errors found. Otherwise, C<*errors> is the bit-wise C<OR> of the bits described in the list below. Some of these bits will be set if a malformation is found, even if the input C<flags> parameter indicates that the given malformation is allowed; those exceptions are noted: =over 4 =item C<UTF8_GOT_PERL_EXTENDED> The input sequence is not standard UTF-8, but a Perl extension. This bit is set only if the input C<flags> parameter contains either the C<UTF8_DISALLOW_PERL_EXTENDED> or the C<UTF8_WARN_PERL_EXTENDED> flags. Code points above 0x7FFF_FFFF (2**31 - 1) were never specified in any standard, and so some extension must be used to express them. Perl uses a natural extension to UTF-8 to represent the ones up to 2**36-1, and invented a further extension to represent even higher ones, so that any code point that fits in a 64-bit word can be represented. Text using these extensions is not likely to be portable to non-Perl code. We lump both of these extensions together and refer to them as Perl extended UTF-8. There exist other extensions that people have invented, incompatible with Perl's. On EBCDIC platforms starting in Perl v5.24, the Perl extension for representing extremely high code points kicks in at 0x3FFF_FFFF (2**30 -1), which is lower than on ASCII. Prior to that, code points 2**31 and higher were simply unrepresentable, and a different, incompatible method was used to represent code points between 2**30 and 2**31 - 1. On both platforms, ASCII and EBCDIC, C<UTF8_GOT_PERL_EXTENDED> is set if Perl extended UTF-8 is used. In earlier Perls, this bit was named C<UTF8_GOT_ABOVE_31_BIT>, which you still may use for backward compatibility. That name is misleading, as this flag may be set when the code point actually does fit in 31 bits. This happens on EBCDIC platforms, and sometimes when the L<overlong malformation|/C<UTF8_GOT_LONG>> is also present. The new name accurately describes the situation in all cases. =item C<UTF8_GOT_CONTINUATION> The input sequence was malformed in that the first byte was a UTF-8 continuation byte. =item C<UTF8_GOT_EMPTY> The input C<curlen> parameter was 0. =item C<UTF8_GOT_LONG> The input sequence was malformed in that there is some other sequence that evaluates to the same code point, but that sequence is shorter than this one. Until Unicode 3.1, it was legal for programs to accept this malformation, but it was discovered that this created security issues. =item C<UTF8_GOT_NONCHAR> The code point represented by the input UTF-8 sequence is for a Unicode non-character code point. This bit is set only if the input C<flags> parameter contains either the C<UTF8_DISALLOW_NONCHAR> or the C<UTF8_WARN_NONCHAR> flags. =item C<UTF8_GOT_NON_CONTINUATION> The input sequence was malformed in that a non-continuation type byte was found in a position where only a continuation type one should be. See also L</C<UTF8_GOT_SHORT>>. =item C<UTF8_GOT_OVERFLOW> The input sequence was malformed in that it is for a code point that is not representable in the number of bits available in an IV on the current platform. =item C<UTF8_GOT_SHORT> The input sequence was malformed in that C<curlen> is smaller than required for a complete sequence. In other words, the input is for a partial character sequence. C<UTF8_GOT_SHORT> and C<UTF8_GOT_NON_CONTINUATION> both indicate a too short sequence. The difference is that C<UTF8_GOT_NON_CONTINUATION> indicates always that there is an error, while C<UTF8_GOT_SHORT> means that an incomplete sequence was looked at. If no other flags are present, it means that the sequence was valid as far as it went. Depending on the application, this could mean one of three things: =over =item * The C<curlen> length parameter passed in was too small, and the function was prevented from examining all the necessary bytes. =item * The buffer being looked at is based on reading data, and the data received so far stopped in the middle of a character, so that the next read will read the remainder of this character. (It is up to the caller to deal with the split bytes somehow.) =item * This is a real error, and the partial sequence is all we're going to get. =back =item C<UTF8_GOT_SUPER> The input sequence was malformed in that it is for a non-Unicode code point; that is, one above the legal Unicode maximum. This bit is set only if the input C<flags> parameter contains either the C<UTF8_DISALLOW_SUPER> or the C<UTF8_WARN_SUPER> flags. =item C<UTF8_GOT_SURROGATE> The input sequence was malformed in that it is for a -Unicode UTF-16 surrogate code point. This bit is set only if the input C<flags> parameter contains either the C<UTF8_DISALLOW_SURROGATE> or the C<UTF8_WARN_SURROGATE> flags. =back To do your own error handling, call this function with the C<UTF8_CHECK_ONLY> flag to suppress any warnings, and then examine the C<*errors> return. UV utf8n_to_uvchr_error(const U8 *s, STRLEN curlen, STRLEN *retlen, const U32 flags, U32 * errors) =for hackers Found in file utf8.c =item utf8n_to_uvchr_msgs X<utf8n_to_uvchr_msgs> NOTE: this function is experimental and may change or be removed without notice. THIS FUNCTION SHOULD BE USED IN ONLY VERY SPECIALIZED CIRCUMSTANCES. Most code should use L</utf8_to_uvchr_buf>() rather than call this directly. This function is for code that needs to know what the precise malformation(s) are when an error is found, and wants the corresponding warning and/or error messages to be returned to the caller rather than be displayed. All messages that would have been displayed if all lexcial warnings are enabled will be returned. It is just like C<L</utf8n_to_uvchr_error>> but it takes an extra parameter placed after all the others, C<msgs>. If this parameter is 0, this function behaves identically to C<L</utf8n_to_uvchr_error>>. Otherwise, C<msgs> should be a pointer to an C<AV *> variable, in which this function creates a new AV to contain any appropriate messages. The elements of the array are ordered so that the first message that would have been displayed is in the 0th element, and so on. Each element is a hash with three key-value pairs, as follows: =over 4 =item C<text> The text of the message as a C<SVpv>. =item C<warn_categories> The warning category (or categories) packed into a C<SVuv>. =item C<flag> A single flag bit associated with this message, in a C<SVuv>. The bit corresponds to some bit in the C<*errors> return value, such as C<UTF8_GOT_LONG>. =back It's important to note that specifying this parameter as non-null will cause any warnings this function would otherwise generate to be suppressed, and instead be placed in C<*msgs>. The caller can check the lexical warnings state (or not) when choosing what to do with the returned messages. If the flag C<UTF8_CHECK_ONLY> is passed, no warnings are generated, and hence no AV is created. The caller, of course, is responsible for freeing any returned AV. UV utf8n_to_uvchr_msgs(const U8 *s, STRLEN curlen, STRLEN *retlen, const U32 flags, U32 * errors, AV ** msgs) =for hackers Found in file utf8.c =item UTF8SKIP X<UTF8SKIP> returns the number of bytes a non-malformed UTF-8 encoded character whose first (perhaps only) byte is pointed to by C<s>. If there is a possibility of malformed input, use instead: =over =item L</C<UTF8_SAFE_SKIP>> if you know the maximum ending pointer in the buffer pointed to by C<s>; or =item L</C<UTF8_CHK_SKIP>> if you don't know it. =back It is better to restructure your code so the end pointer is passed down so that you know what it actually is at the point of this call, but if that isn't possible, L</C<UTF8_CHK_SKIP>> can minimize the chance of accessing beyond the end of the input buffer. STRLEN UTF8SKIP(char* s) =for hackers Found in file utf8.h =item UTF8_CHK_SKIP X<UTF8_CHK_SKIP> This is a safer version of L</C<UTF8SKIP>>, but still not as safe as L</C<UTF8_SAFE_SKIP>>. This version doesn't blindly assume that the input string pointed to by C<s> is well-formed, but verifies that there isn't a NUL terminating character before the expected end of the next character in C<s>. The length C<UTF8_CHK_SKIP> returns stops just before any such NUL. Perl tends to add NULs, as an insurance policy, after the end of strings in SV's, so it is likely that using this macro will prevent inadvertent reading beyond the end of the input buffer, even if it is malformed UTF-8. This macro is intended to be used by XS modules where the inputs could be malformed, and it isn't feasible to restructure to use the safer L</C<UTF8_SAFE_SKIP>>, for example when interfacing with a C library. STRLEN UTF8_CHK_SKIP(char* s) =for hackers Found in file utf8.h =item utf8_distance X<utf8_distance> Returns the number of UTF-8 characters between the UTF-8 pointers C<a> and C<b>. WARNING: use only if you *know* that the pointers point inside the same UTF-8 buffer. IV utf8_distance(const U8 *a, const U8 *b) =for hackers Found in file inline.h =item utf8_hop X<utf8_hop> Return the UTF-8 pointer C<s> displaced by C<off> characters, either forward or backward. WARNING: do not use the following unless you *know* C<off> is within the UTF-8 data pointed to by C<s> *and* that on entry C<s> is aligned on the first byte of character or just after the last byte of a character. U8* utf8_hop(const U8 *s, SSize_t off) =for hackers Found in file inline.h =item utf8_hop_back X<utf8_hop_back> Return the UTF-8 pointer C<s> displaced by up to C<off> characters, backward. C<off> must be non-positive. C<s> must be after or equal to C<start>. When moving backward it will not move before C<start>. Will not exceed this limit even if the string is not valid "UTF-8". U8* utf8_hop_back(const U8 *s, SSize_t off, const U8 *start) =for hackers Found in file inline.h =item utf8_hop_forward X<utf8_hop_forward> Return the UTF-8 pointer C<s> displaced by up to C<off> characters, forward. C<off> must be non-negative. C<s> must be before or equal to C<end>. When moving forward it will not move beyond C<end>. Will not exceed this limit even if the string is not valid "UTF-8". U8* utf8_hop_forward(const U8 *s, SSize_t off, const U8 *end) =for hackers Found in file inline.h =item utf8_hop_safe X<utf8_hop_safe> Return the UTF-8 pointer C<s> displaced by up to C<off> characters, either forward or backward. When moving backward it will not move before C<start>. When moving forward it will not move beyond C<end>. Will not exceed those limits even if the string is not valid "UTF-8". U8* utf8_hop_safe(const U8 *s, SSize_t off, const U8 *start, const U8 *end) =for hackers Found in file inline.h =item UTF8_IS_INVARIANT X<UTF8_IS_INVARIANT> Evaluates to 1 if the byte C<c> represents the same character when encoded in UTF-8 as when not; otherwise evaluates to 0. UTF-8 invariant characters can be copied as-is when converting to/from UTF-8, saving time. In spite of the name, this macro gives the correct result if the input string from which C<c> comes is not encoded in UTF-8. See C<L</UVCHR_IS_INVARIANT>> for checking if a UV is invariant. bool UTF8_IS_INVARIANT(char c) =for hackers Found in file utf8.h =item UTF8_IS_NONCHAR X<UTF8_IS_NONCHAR> Evaluates to non-zero if the first few bytes of the string starting at C<s> and looking no further than S<C<e - 1>> are well-formed UTF-8 that represents one of the Unicode non-character code points; otherwise it evaluates to 0. If non-zero, the value gives how many bytes starting at C<s> comprise the code point's representation. bool UTF8_IS_NONCHAR(const U8 *s, const U8 *e) =for hackers Found in file utf8.h =item UTF8_IS_SUPER X<UTF8_IS_SUPER> Recall that Perl recognizes an extension to UTF-8 that can encode code points larger than the ones defined by Unicode, which are 0..0x10FFFF. This macro evaluates to non-zero if the first few bytes of the string starting at C<s> and looking no further than S<C<e - 1>> are from this UTF-8 extension; otherwise it evaluates to 0. If non-zero, the value gives how many bytes starting at C<s> comprise the code point's representation. 0 is returned if the bytes are not well-formed extended UTF-8, or if they represent a code point that cannot fit in a UV on the current platform. Hence this macro can give different results when run on a 64-bit word machine than on one with a 32-bit word size. Note that it is illegal to have code points that are larger than what can fit in an IV on the current machine. bool UTF8_IS_SUPER(const U8 *s, const U8 *e) =for hackers Found in file utf8.h =item UTF8_IS_SURROGATE X<UTF8_IS_SURROGATE> Evaluates to non-zero if the first few bytes of the string starting at C<s> and looking no further than S<C<e - 1>> are well-formed UTF-8 that represents one of the Unicode surrogate code points; otherwise it evaluates to 0. If non-zero, the value gives how many bytes starting at C<s> comprise the code point's representation. bool UTF8_IS_SURROGATE(const U8 *s, const U8 *e) =for hackers Found in file utf8.h =item utf8_length X<utf8_length> Returns the number of characters in the sequence of UTF-8-encoded bytes starting at C<s> and ending at the byte just before C<e>. If <s> and <e> point to the same place, it returns 0 with no warning raised. If C<e E<lt> s> or if the scan would end up past C<e>, it raises a UTF8 warning and returns the number of valid characters. STRLEN utf8_length(const U8* s, const U8 *e) =for hackers Found in file utf8.c =item UTF8_MAXBYTES X<UTF8_MAXBYTES> The maximum width of a single UTF-8 encoded character, in bytes. NOTE: Strictly speaking Perl's UTF-8 should not be called UTF-8 since UTF-8 is an encoding of Unicode, and Unicode's upper limit, 0x10FFFF, can be expressed with 4 bytes. However, Perl thinks of UTF-8 as a way to encode non-negative integers in a binary format, even those above Unicode. =for hackers Found in file utf8.h =item UTF8_MAXBYTES_CASE X<UTF8_MAXBYTES_CASE> The maximum number of UTF-8 bytes a single Unicode character can uppercase/lowercase/titlecase/fold into. =for hackers Found in file utf8.h =item UTF8_SAFE_SKIP X<UTF8_SAFE_SKIP> returns 0 if S<C<s E<gt>= e>>; otherwise returns the number of bytes in the UTF-8 encoded character whose first byte is pointed to by C<s>. But it never returns beyond C<e>. On DEBUGGING builds, it asserts that S<C<s E<lt>= e>>. STRLEN UTF8_SAFE_SKIP(char* s, char* e) =for hackers Found in file utf8.h =item UTF8_SKIP X<UTF8_SKIP> This is a synonym for L</C<UTF8SKIP>> STRLEN UTF8_SKIP(char* s) =for hackers Found in file utf8.h =item utf8_to_bytes X<utf8_to_bytes> NOTE: this function is experimental and may change or be removed without notice. Converts a string C<"s"> of length C<*lenp> from UTF-8 into native byte encoding. Unlike L</bytes_to_utf8>, this over-writes the original string, and updates C<*lenp> to contain the new length. Returns zero on failure (leaving C<"s"> unchanged) setting C<*lenp> to -1. Upon successful return, the number of variants in the string can be computed by having saved the value of C<*lenp> before the call, and subtracting the after-call value of C<*lenp> from it. If you need a copy of the string, see L</bytes_from_utf8>. U8* utf8_to_bytes(U8 *s, STRLEN *lenp) =for hackers Found in file utf8.c =item utf8_to_uvchr_buf X<utf8_to_uvchr_buf> Returns the native code point of the first character in the string C<s> which is assumed to be in UTF-8 encoding; C<send> points to 1 beyond the end of C<s>. C<*retlen> will be set to the length, in bytes, of that character. If C<s> does not point to a well-formed UTF-8 character and UTF8 warnings are enabled, zero is returned and C<*retlen> is set (if C<retlen> isn't C<NULL>) to -1. If those warnings are off, the computed value, if well-defined (or the Unicode REPLACEMENT CHARACTER if not), is silently returned, and C<*retlen> is set (if C<retlen> isn't C<NULL>) so that (S<C<s> + C<*retlen>>) is the next possible position in C<s> that could begin a non-malformed character. See L</utf8n_to_uvchr> for details on when the REPLACEMENT CHARACTER is returned. UV utf8_to_uvchr_buf(const U8 *s, const U8 *send, STRLEN *retlen) =for hackers Found in file utf8.c =item UVCHR_IS_INVARIANT X<UVCHR_IS_INVARIANT> Evaluates to 1 if the representation of code point C<cp> is the same whether or not it is encoded in UTF-8; otherwise evaluates to 0. UTF-8 invariant characters can be copied as-is when converting to/from UTF-8, saving time. C<cp> is Unicode if above 255; otherwise is platform-native. bool UVCHR_IS_INVARIANT(UV cp) =for hackers Found in file utf8.h =item UVCHR_SKIP X<UVCHR_SKIP> returns the number of bytes required to represent the code point C<cp> when encoded as UTF-8. C<cp> is a native (ASCII or EBCDIC) code point if less than 255; a Unicode code point otherwise. STRLEN UVCHR_SKIP(UV cp) =for hackers Found in file utf8.h =item uvchr_to_utf8 X<uvchr_to_utf8> Adds the UTF-8 representation of the native code point C<uv> to the end of the string C<d>; C<d> should have at least C<UVCHR_SKIP(uv)+1> (up to C<UTF8_MAXBYTES+1>) free bytes available. The return value is the pointer to the byte after the end of the new character. In other words, d = uvchr_to_utf8(d, uv); is the recommended wide native character-aware way of saying *(d++) = uv; This function accepts any code point from 0..C<IV_MAX> as input. C<IV_MAX> is typically 0x7FFF_FFFF in a 32-bit word. It is possible to forbid or warn on non-Unicode code points, or those that may be problematic by using L</uvchr_to_utf8_flags>. U8* uvchr_to_utf8(U8 *d, UV uv) =for hackers Found in file utf8.c =item uvchr_to_utf8_flags X<uvchr_to_utf8_flags> Adds the UTF-8 representation of the native code point C<uv> to the end of the string C<d>; C<d> should have at least C<UVCHR_SKIP(uv)+1> (up to C<UTF8_MAXBYTES+1>) free bytes available. The return value is the pointer to the byte after the end of the new character. In other words, d = uvchr_to_utf8_flags(d, uv, flags); or, in most cases, d = uvchr_to_utf8_flags(d, uv, 0); This is the Unicode-aware way of saying *(d++) = uv; If C<flags> is 0, this function accepts any code point from 0..C<IV_MAX> as input. C<IV_MAX> is typically 0x7FFF_FFFF in a 32-bit word. Specifying C<flags> can further restrict what is allowed and not warned on, as follows: If C<uv> is a Unicode surrogate code point and C<UNICODE_WARN_SURROGATE> is set, the function will raise a warning, provided UTF8 warnings are enabled. If instead C<UNICODE_DISALLOW_SURROGATE> is set, the function will fail and return NULL. If both flags are set, the function will both warn and return NULL. Similarly, the C<UNICODE_WARN_NONCHAR> and C<UNICODE_DISALLOW_NONCHAR> flags affect how the function handles a Unicode non-character. And likewise, the C<UNICODE_WARN_SUPER> and C<UNICODE_DISALLOW_SUPER> flags affect the handling of code points that are above the Unicode maximum of 0x10FFFF. Languages other than Perl may not be able to accept files that contain these. The flag C<UNICODE_WARN_ILLEGAL_INTERCHANGE> selects all three of the above WARN flags; and C<UNICODE_DISALLOW_ILLEGAL_INTERCHANGE> selects all three DISALLOW flags. C<UNICODE_DISALLOW_ILLEGAL_INTERCHANGE> restricts the allowed inputs to the strict UTF-8 traditionally defined by Unicode. Similarly, C<UNICODE_WARN_ILLEGAL_C9_INTERCHANGE> and C<UNICODE_DISALLOW_ILLEGAL_C9_INTERCHANGE> are shortcuts to select the above-Unicode and surrogate flags, but not the non-character ones, as defined in L<Unicode Corrigendum #9|https://www.unicode.org/versions/corrigendum9.html>. See L<perlunicode/Noncharacter code points>. Extremely high code points were never specified in any standard, and require an extension to UTF-8 to express, which Perl does. It is likely that programs written in something other than Perl would not be able to read files that contain these; nor would Perl understand files written by something that uses a different extension. For these reasons, there is a separate set of flags that can warn and/or disallow these extremely high code points, even if other above-Unicode ones are accepted. They are the C<UNICODE_WARN_PERL_EXTENDED> and C<UNICODE_DISALLOW_PERL_EXTENDED> flags. For more information see L</C<UTF8_GOT_PERL_EXTENDED>>. Of course C<UNICODE_DISALLOW_SUPER> will treat all above-Unicode code points, including these, as malformations. (Note that the Unicode standard considers anything above 0x10FFFF to be illegal, but there are standards predating it that allow up to 0x7FFF_FFFF (2**31 -1)) A somewhat misleadingly named synonym for C<UNICODE_WARN_PERL_EXTENDED> is retained for backward compatibility: C<UNICODE_WARN_ABOVE_31_BIT>. Similarly, C<UNICODE_DISALLOW_ABOVE_31_BIT> is usable instead of the more accurately named C<UNICODE_DISALLOW_PERL_EXTENDED>. The names are misleading because on EBCDIC platforms,these flags can apply to code points that actually do fit in 31 bits. The new names accurately describe the situation in all cases. U8* uvchr_to_utf8_flags(U8 *d, UV uv, UV flags) =for hackers Found in file utf8.c =item uvchr_to_utf8_flags_msgs X<uvchr_to_utf8_flags_msgs> NOTE: this function is experimental and may change or be removed without notice. THIS FUNCTION SHOULD BE USED IN ONLY VERY SPECIALIZED CIRCUMSTANCES. Most code should use C<L</uvchr_to_utf8_flags>()> rather than call this directly. This function is for code that wants any warning and/or error messages to be returned to the caller rather than be displayed. All messages that would have been displayed if all lexical warnings are enabled will be returned. It is just like C<L</uvchr_to_utf8_flags>> but it takes an extra parameter placed after all the others, C<msgs>. If this parameter is 0, this function behaves identically to C<L</uvchr_to_utf8_flags>>. Otherwise, C<msgs> should be a pointer to an C<HV *> variable, in which this function creates a new HV to contain any appropriate messages. The hash has three key-value pairs, as follows: =over 4 =item C<text> The text of the message as a C<SVpv>. =item C<warn_categories> The warning category (or categories) packed into a C<SVuv>. =item C<flag> A single flag bit associated with this message, in a C<SVuv>. The bit corresponds to some bit in the C<*errors> return value, such as C<UNICODE_GOT_SURROGATE>. =back It's important to note that specifying this parameter as non-null will cause any warnings this function would otherwise generate to be suppressed, and instead be placed in C<*msgs>. The caller can check the lexical warnings state (or not) when choosing what to do with the returned messages. The caller, of course, is responsible for freeing any returned HV. U8* uvchr_to_utf8_flags_msgs(U8 *d, UV uv, UV flags, HV ** msgs) =for hackers Found in file utf8.c =back =head1 Variables created by C<xsubpp> and C<xsubpp> internal functions =over 8 =item newXSproto X<newXSproto> Used by C<xsubpp> to hook up XSUBs as Perl subs. Adds Perl prototypes to the subs. =for hackers Found in file XSUB.h =item XS_APIVERSION_BOOTCHECK X<XS_APIVERSION_BOOTCHECK> Macro to verify that the perl api version an XS module has been compiled against matches the api version of the perl interpreter it's being loaded into. XS_APIVERSION_BOOTCHECK; =for hackers Found in file XSUB.h =item XS_VERSION X<XS_VERSION> The version identifier for an XS module. This is usually handled automatically by C<ExtUtils::MakeMaker>. See C<L</XS_VERSION_BOOTCHECK>>. =for hackers Found in file XSUB.h =item XS_VERSION_BOOTCHECK X<XS_VERSION_BOOTCHECK> Macro to verify that a PM module's C<$VERSION> variable matches the XS module's C<XS_VERSION> variable. This is usually handled automatically by C<xsubpp>. See L<perlxs/"The VERSIONCHECK: Keyword">. XS_VERSION_BOOTCHECK; =for hackers Found in file XSUB.h =back =head1 Warning and Dieing In all these calls, the C<U32 wI<n>> parameters are warning category constants. You can see the ones currently available in L<warnings/Category Hierarchy>, just capitalize all letters in the names and prefix them by C<WARN_>. So, for example, the category C<void> used in a perl program becomes C<WARN_VOID> when used in XS code and passed to one of the calls below. =over 8 =item ckWARN X<ckWARN> Returns a boolean as to whether or not warnings are enabled for the warning category C<w>. If the category is by default enabled even if not within the scope of S<C<use warnings>>, instead use the L</ckWARN_d> macro. bool ckWARN(U32 w) =for hackers Found in file warnings.h =item ckWARN2 X<ckWARN2> Like C<L</ckWARN>>, but takes two warnings categories as input, and returns TRUE if either is enabled. If either category is by default enabled even if not within the scope of S<C<use warnings>>, instead use the L</ckWARN2_d> macro. The categories must be completely independent, one may not be subclassed from the other. bool ckWARN2(U32 w1, U32 w2) =for hackers Found in file warnings.h =item ckWARN3 X<ckWARN3> Like C<L</ckWARN2>>, but takes three warnings categories as input, and returns TRUE if any is enabled. If any of the categories is by default enabled even if not within the scope of S<C<use warnings>>, instead use the L</ckWARN3_d> macro. The categories must be completely independent, one may not be subclassed from any other. bool ckWARN3(U32 w1, U32 w2, U32 w3) =for hackers Found in file warnings.h =item ckWARN4 X<ckWARN4> Like C<L</ckWARN3>>, but takes four warnings categories as input, and returns TRUE if any is enabled. If any of the categories is by default enabled even if not within the scope of S<C<use warnings>>, instead use the L</ckWARN4_d> macro. The categories must be completely independent, one may not be subclassed from any other. bool ckWARN4(U32 w1, U32 w2, U32 w3, U32 w4) =for hackers Found in file warnings.h =item ckWARN_d X<ckWARN_d> Like C<L</ckWARN>>, but for use if and only if the warning category is by default enabled even if not within the scope of S<C<use warnings>>. bool ckWARN_d(U32 w) =for hackers Found in file warnings.h =item ckWARN2_d X<ckWARN2_d> Like C<L</ckWARN2>>, but for use if and only if either warning category is by default enabled even if not within the scope of S<C<use warnings>>. bool ckWARN2_d(U32 w1, U32 w2) =for hackers Found in file warnings.h =item ckWARN3_d X<ckWARN3_d> Like C<L</ckWARN3>>, but for use if and only if any of the warning categories is by default enabled even if not within the scope of S<C<use warnings>>. bool ckWARN3_d(U32 w1, U32 w2, U32 w3) =for hackers Found in file warnings.h =item ckWARN4_d X<ckWARN4_d> Like C<L</ckWARN4>>, but for use if and only if any of the warning categories is by default enabled even if not within the scope of S<C<use warnings>>. bool ckWARN4_d(U32 w1, U32 w2, U32 w3, U32 w4) =for hackers Found in file warnings.h =item CLEAR_ERRSV X<CLEAR_ERRSV> Clear the contents of C<$@>, setting it to the empty string. This replaces any read-only SV with a fresh SV and removes any magic. void CLEAR_ERRSV() =for hackers Found in file perl.h =item croak X<croak> This is an XS interface to Perl's C<die> function. Take a sprintf-style format pattern and argument list. These are used to generate a string message. If the message does not end with a newline, then it will be extended with some indication of the current location in the code, as described for L</mess_sv>. The error message will be used as an exception, by default returning control to the nearest enclosing C<eval>, but subject to modification by a C<$SIG{__DIE__}> handler. In any case, the C<croak> function never returns normally. For historical reasons, if C<pat> is null then the contents of C<ERRSV> (C<$@>) will be used as an error message or object instead of building an error message from arguments. If you want to throw a non-string object, or build an error message in an SV yourself, it is preferable to use the L</croak_sv> function, which does not involve clobbering C<ERRSV>. void croak(const char* pat, ...) =for hackers Found in file util.c =item croak_no_modify X<croak_no_modify> Exactly equivalent to C<Perl_croak(aTHX_ "%s", PL_no_modify)>, but generates terser object code than using C<Perl_croak>. Less code used on exception code paths reduces CPU cache pressure. void croak_no_modify() =for hackers Found in file util.c =item croak_sv X<croak_sv> This is an XS interface to Perl's C<die> function. C<baseex> is the error message or object. If it is a reference, it will be used as-is. Otherwise it is used as a string, and if it does not end with a newline then it will be extended with some indication of the current location in the code, as described for L</mess_sv>. The error message or object will be used as an exception, by default returning control to the nearest enclosing C<eval>, but subject to modification by a C<$SIG{__DIE__}> handler. In any case, the C<croak_sv> function never returns normally. To die with a simple string message, the L</croak> function may be more convenient. void croak_sv(SV *baseex) =for hackers Found in file util.c =item die X<die> Behaves the same as L</croak>, except for the return type. It should be used only where the C<OP *> return type is required. The function never actually returns. OP* die(const char* pat, ...) =for hackers Found in file util.c =item die_sv X<die_sv> Behaves the same as L</croak_sv>, except for the return type. It should be used only where the C<OP *> return type is required. The function never actually returns. OP* die_sv(SV *baseex) =for hackers Found in file util.c =item ERRSV X<ERRSV> Returns the SV for C<$@>, creating it if needed. SV * ERRSV =for hackers Found in file perl.h =item my_setenv X<my_setenv> A wrapper for the C library L<setenv(3)>. Don't use the latter, as the perl version has desirable safeguards void my_setenv(const char* nam, const char* val) =for hackers Found in file util.c =item rsignal X<rsignal> A wrapper for the C library L<signal(2)>. Don't use the latter, as the Perl version knows things that interact with the rest of the perl interpreter. Sighandler_t rsignal(int i, Sighandler_t t) =for hackers Found in file util.c =item SANE_ERRSV X<SANE_ERRSV> Clean up ERRSV so we can safely set it. This replaces any read-only SV with a fresh writable copy and removes any magic. void SANE_ERRSV() =for hackers Found in file perl.h =item vcroak X<vcroak> This is an XS interface to Perl's C<die> function. C<pat> and C<args> are a sprintf-style format pattern and encapsulated argument list. These are used to generate a string message. If the message does not end with a newline, then it will be extended with some indication of the current location in the code, as described for L</mess_sv>. The error message will be used as an exception, by default returning control to the nearest enclosing C<eval>, but subject to modification by a C<$SIG{__DIE__}> handler. In any case, the C<croak> function never returns normally. For historical reasons, if C<pat> is null then the contents of C<ERRSV> (C<$@>) will be used as an error message or object instead of building an error message from arguments. If you want to throw a non-string object, or build an error message in an SV yourself, it is preferable to use the L</croak_sv> function, which does not involve clobbering C<ERRSV>. void vcroak(const char* pat, va_list* args) =for hackers Found in file util.c =item vwarn X<vwarn> This is an XS interface to Perl's C<warn> function. C<pat> and C<args> are a sprintf-style format pattern and encapsulated argument list. These are used to generate a string message. If the message does not end with a newline, then it will be extended with some indication of the current location in the code, as described for L</mess_sv>. The error message or object will by default be written to standard error, but this is subject to modification by a C<$SIG{__WARN__}> handler. Unlike with L</vcroak>, C<pat> is not permitted to be null. void vwarn(const char* pat, va_list* args) =for hackers Found in file util.c =item warn X<warn> This is an XS interface to Perl's C<warn> function. Take a sprintf-style format pattern and argument list. These are used to generate a string message. If the message does not end with a newline, then it will be extended with some indication of the current location in the code, as described for L</mess_sv>. The error message or object will by default be written to standard error, but this is subject to modification by a C<$SIG{__WARN__}> handler. Unlike with L</croak>, C<pat> is not permitted to be null. void warn(const char* pat, ...) =for hackers Found in file util.c =item warn_sv X<warn_sv> This is an XS interface to Perl's C<warn> function. C<baseex> is the error message or object. If it is a reference, it will be used as-is. Otherwise it is used as a string, and if it does not end with a newline then it will be extended with some indication of the current location in the code, as described for L</mess_sv>. The error message or object will by default be written to standard error, but this is subject to modification by a C<$SIG{__WARN__}> handler. To warn with a simple string message, the L</warn> function may be more convenient. void warn_sv(SV *baseex) =for hackers Found in file util.c =back =head1 Undocumented functions The following functions have been flagged as part of the public API, but are currently undocumented. Use them at your own risk, as the interfaces are subject to change. Functions that are not listed in this document are not intended for public use, and should NOT be used under any circumstances. If you feel you need to use one of these functions, first send email to L<perl5-porters@perl.org|mailto:perl5-porters@perl.org>. It may be that there is a good reason for the function not being documented, and it should be removed from this list; or it may just be that no one has gotten around to documenting it. In the latter case, you will be asked to submit a patch to document the function. Once your patch is accepted, it will indicate that the interface is stable (unless it is explicitly marked otherwise) and usable by you. =over =item CvDEPTH X<CvDEPTH> =item CvGV X<CvGV> =item GetVars X<GetVars> =item Gv_AMupdate X<Gv_AMupdate> =item PerlIO_close X<PerlIO_close> =item PerlIO_context_layers X<PerlIO_context_layers> =item PerlIO_error X<PerlIO_error> =item PerlIO_fill X<PerlIO_fill> =item PerlIO_flush X<PerlIO_flush> =item PerlIO_get_bufsiz X<PerlIO_get_bufsiz> =item PerlIO_get_ptr X<PerlIO_get_ptr> =item PerlIO_read X<PerlIO_read> =item PerlIO_seek X<PerlIO_seek> =item PerlIO_set_cnt X<PerlIO_set_cnt> =item PerlIO_setlinebuf X<PerlIO_setlinebuf> =item PerlIO_stdout X<PerlIO_stdout> =item PerlIO_unread X<PerlIO_unread> =item SvAMAGIC_off X<SvAMAGIC_off> =item SvAMAGIC_on X<SvAMAGIC_on> =item amagic_call X<amagic_call> =item amagic_deref_call X<amagic_deref_call> =item any_dup X<any_dup> =item atfork_lock X<atfork_lock> =item atfork_unlock X<atfork_unlock> =item av_arylen_p X<av_arylen_p> =item av_iter_p X<av_iter_p> =item block_gimme X<block_gimme> =item call_atexit X<call_atexit> =item call_list X<call_list> =item calloc X<calloc> =item cast_i32 X<cast_i32> =item cast_iv X<cast_iv> =item cast_ulong X<cast_ulong> =item cast_uv X<cast_uv> =item ck_warner X<ck_warner> =item ck_warner_d X<ck_warner_d> =item ckwarn X<ckwarn> =item ckwarn_d X<ckwarn_d> =item clear_defarray X<clear_defarray> =item clone_params_del X<clone_params_del> =item clone_params_new X<clone_params_new> =item croak_nocontext X<croak_nocontext> =item csighandler X<csighandler> =item csighandler1 X<csighandler1> =item csighandler3 X<csighandler3> =item cx_dump X<cx_dump> =item cx_dup X<cx_dup> =item cxinc X<cxinc> =item deb X<deb> =item deb_nocontext X<deb_nocontext> =item debop X<debop> =item debprofdump X<debprofdump> =item debstack X<debstack> =item debstackptrs X<debstackptrs> =item delimcpy X<delimcpy> =item despatch_signals X<despatch_signals> =item die_nocontext X<die_nocontext> =item dirp_dup X<dirp_dup> =item do_aspawn X<do_aspawn> =item do_close X<do_close> =item do_gv_dump X<do_gv_dump> =item do_gvgv_dump X<do_gvgv_dump> =item do_hv_dump X<do_hv_dump> =item do_join X<do_join> =item do_magic_dump X<do_magic_dump> =item do_op_dump X<do_op_dump> =item do_open X<do_open> =item do_openn X<do_openn> =item do_pmop_dump X<do_pmop_dump> =item do_spawn X<do_spawn> =item do_spawn_nowait X<do_spawn_nowait> =item do_sprintf X<do_sprintf> =item do_sv_dump X<do_sv_dump> =item doing_taint X<doing_taint> =item doref X<doref> =item dounwind X<dounwind> =item dowantarray X<dowantarray> =item dump_eval X<dump_eval> =item dump_form X<dump_form> =item dump_indent X<dump_indent> =item dump_mstats X<dump_mstats> =item dump_sub X<dump_sub> =item dump_vindent X<dump_vindent> =item filter_del X<filter_del> =item filter_read X<filter_read> =item foldEQ_latin1 X<foldEQ_latin1> =item form_nocontext X<form_nocontext> =item fp_dup X<fp_dup> =item free_global_struct X<free_global_struct> =item free_tmps X<free_tmps> =item get_context X<get_context> =item get_mstats X<get_mstats> =item get_op_descs X<get_op_descs> =item get_op_names X<get_op_names> =item get_ppaddr X<get_ppaddr> =item get_vtbl X<get_vtbl> =item gp_dup X<gp_dup> =item gp_free X<gp_free> =item gp_ref X<gp_ref> =item gv_AVadd X<gv_AVadd> =item gv_HVadd X<gv_HVadd> =item gv_IOadd X<gv_IOadd> =item gv_SVadd X<gv_SVadd> =item gv_add_by_type X<gv_add_by_type> =item gv_autoload4 X<gv_autoload4> =item gv_autoload_pv X<gv_autoload_pv> =item gv_autoload_pvn X<gv_autoload_pvn> =item gv_autoload_sv X<gv_autoload_sv> =item gv_check X<gv_check> =item gv_dump X<gv_dump> =item gv_efullname3 X<gv_efullname3> =item gv_efullname4 X<gv_efullname4> =item gv_fetchfile X<gv_fetchfile> =item gv_fetchfile_flags X<gv_fetchfile_flags> =item gv_fetchpv X<gv_fetchpv> =item gv_fetchpvn_flags X<gv_fetchpvn_flags> =item gv_fetchsv X<gv_fetchsv> =item gv_fullname3 X<gv_fullname3> =item gv_fullname4 X<gv_fullname4> =item gv_handler X<gv_handler> =item gv_name_set X<gv_name_set> =item he_dup X<he_dup> =item hek_dup X<hek_dup> =item hv_common X<hv_common> =item hv_common_key_len X<hv_common_key_len> =item hv_delayfree_ent X<hv_delayfree_ent> =item hv_eiter_p X<hv_eiter_p> =item hv_eiter_set X<hv_eiter_set> =item hv_free_ent X<hv_free_ent> =item hv_ksplit X<hv_ksplit> =item hv_name_set X<hv_name_set> =item hv_placeholders_get X<hv_placeholders_get> =item hv_placeholders_set X<hv_placeholders_set> =item hv_rand_set X<hv_rand_set> =item hv_riter_p X<hv_riter_p> =item hv_riter_set X<hv_riter_set> =item ibcmp_utf8 X<ibcmp_utf8> =item init_global_struct X<init_global_struct> =item init_stacks X<init_stacks> =item init_tm X<init_tm> =item is_lvalue_sub X<is_lvalue_sub> =item leave_scope X<leave_scope> =item load_module_nocontext X<load_module_nocontext> =item magic_dump X<magic_dump> =item markstack_grow X<markstack_grow> =item mess_nocontext X<mess_nocontext> =item mfree X<mfree> =item mg_dup X<mg_dup> =item mg_size X<mg_size> =item mini_mktime X<mini_mktime> =item moreswitches X<moreswitches> =item mro_get_from_name X<mro_get_from_name> =item mro_set_mro X<mro_set_mro> =item mro_set_private_data X<mro_set_private_data> =item my_atof X<my_atof> =item my_chsize X<my_chsize> =item my_cxt_index X<my_cxt_index> =item my_cxt_init X<my_cxt_init> =item my_dirfd X<my_dirfd> =item my_failure_exit X<my_failure_exit> =item my_fflush_all X<my_fflush_all> =item my_fork X<my_fork> =item my_lstat X<my_lstat> =item my_pclose X<my_pclose> =item my_popen X<my_popen> =item my_popen_list X<my_popen_list> =item my_socketpair X<my_socketpair> =item my_stat X<my_stat> =item my_strftime X<my_strftime> =item newANONATTRSUB X<newANONATTRSUB> =item newANONHASH X<newANONHASH> =item newANONLIST X<newANONLIST> =item newANONSUB X<newANONSUB> =item newATTRSUB X<newATTRSUB> =item newAVREF X<newAVREF> =item newCVREF X<newCVREF> =item newFORM X<newFORM> =item newGVREF X<newGVREF> =item newGVgen X<newGVgen> =item newGVgen_flags X<newGVgen_flags> =item newHVREF X<newHVREF> =item newHVhv X<newHVhv> =item newIO X<newIO> =item newMYSUB X<newMYSUB> =item newPROG X<newPROG> =item newRV X<newRV> =item newSUB X<newSUB> =item newSVREF X<newSVREF> =item newSVpvf_nocontext X<newSVpvf_nocontext> =item newSVsv_flags X<newSVsv_flags> =item new_stackinfo X<new_stackinfo> =item op_refcnt_lock X<op_refcnt_lock> =item op_refcnt_unlock X<op_refcnt_unlock> =item parser_dup X<parser_dup> =item perl_alloc_using X<perl_alloc_using> =item perl_clone_using X<perl_clone_using> =item perly_sighandler X<perly_sighandler> =item pmop_dump X<pmop_dump> =item pop_scope X<pop_scope> =item pregcomp X<pregcomp> =item pregexec X<pregexec> =item pregfree X<pregfree> =item pregfree2 X<pregfree2> =item ptr_table_fetch X<ptr_table_fetch> =item ptr_table_free X<ptr_table_free> =item ptr_table_new X<ptr_table_new> =item ptr_table_split X<ptr_table_split> =item ptr_table_store X<ptr_table_store> =item push_scope X<push_scope> =item re_compile X<re_compile> =item re_dup_guts X<re_dup_guts> =item reentrant_free X<reentrant_free> =item reentrant_init X<reentrant_init> =item reentrant_retry X<reentrant_retry> =item reentrant_size X<reentrant_size> =item ref X<ref> =item reg_named_buff_all X<reg_named_buff_all> =item reg_named_buff_exists X<reg_named_buff_exists> =item reg_named_buff_fetch X<reg_named_buff_fetch> =item reg_named_buff_firstkey X<reg_named_buff_firstkey> =item reg_named_buff_nextkey X<reg_named_buff_nextkey> =item reg_named_buff_scalar X<reg_named_buff_scalar> =item regdump X<regdump> =item regdupe_internal X<regdupe_internal> =item regexec_flags X<regexec_flags> =item regfree_internal X<regfree_internal> =item reginitcolors X<reginitcolors> =item regnext X<regnext> =item repeatcpy X<repeatcpy> =item rsignal_state X<rsignal_state> =item runops_debug X<runops_debug> =item runops_standard X<runops_standard> =item rvpv_dup X<rvpv_dup> =item safesyscalloc X<safesyscalloc> =item safesysfree X<safesysfree> =item safesysmalloc X<safesysmalloc> =item safesysrealloc X<safesysrealloc> =item save_I16 X<save_I16> =item save_I32 X<save_I32> =item save_I8 X<save_I8> =item save_adelete X<save_adelete> =item save_aelem X<save_aelem> =item save_aelem_flags X<save_aelem_flags> =item save_alloc X<save_alloc> =item save_ary X<save_ary> =item save_bool X<save_bool> =item save_clearsv X<save_clearsv> =item save_delete X<save_delete> =item save_destructor X<save_destructor> =item save_destructor_x X<save_destructor_x> =item save_freeop X<save_freeop> =item save_freepv X<save_freepv> =item save_freesv X<save_freesv> =item save_generic_pvref X<save_generic_pvref> =item save_generic_svref X<save_generic_svref> =item save_hdelete X<save_hdelete> =item save_helem X<save_helem> =item save_helem_flags X<save_helem_flags> =item save_hints X<save_hints> =item save_hptr X<save_hptr> =item save_int X<save_int> =item save_item X<save_item> =item save_iv X<save_iv> =item save_mortalizesv X<save_mortalizesv> =item save_op X<save_op> =item save_padsv_and_mortalize X<save_padsv_and_mortalize> =item save_pptr X<save_pptr> =item save_pushi32ptr X<save_pushi32ptr> =item save_pushptr X<save_pushptr> =item save_pushptrptr X<save_pushptrptr> =item save_re_context X<save_re_context> =item save_set_svflags X<save_set_svflags> =item save_shared_pvref X<save_shared_pvref> =item save_sptr X<save_sptr> =item save_svref X<save_svref> =item save_vptr X<save_vptr> =item savestack_grow X<savestack_grow> =item savestack_grow_cnt X<savestack_grow_cnt> =item scan_num X<scan_num> =item scan_vstring X<scan_vstring> =item seed X<seed> =item set_context X<set_context> =item share_hek X<share_hek> =item si_dup X<si_dup> =item ss_dup X<ss_dup> =item stack_grow X<stack_grow> =item start_subparse X<start_subparse> =item str_to_version X<str_to_version> =item sv_2iv X<sv_2iv> =item sv_2pv X<sv_2pv> =item sv_2pvbyte_flags X<sv_2pvbyte_flags> =item sv_2pvutf8_flags X<sv_2pvutf8_flags> =item sv_2uv X<sv_2uv> =item sv_catpvf_mg_nocontext X<sv_catpvf_mg_nocontext> =item sv_catpvf_nocontext X<sv_catpvf_nocontext> =item sv_dup X<sv_dup> =item sv_dup_inc X<sv_dup_inc> =item sv_peek X<sv_peek> =item sv_setpvf_mg_nocontext X<sv_setpvf_mg_nocontext> =item sv_setpvf_nocontext X<sv_setpvf_nocontext> =item sys_init X<sys_init> =item sys_init3 X<sys_init3> =item sys_intern_clear X<sys_intern_clear> =item sys_intern_dup X<sys_intern_dup> =item sys_intern_init X<sys_intern_init> =item sys_term X<sys_term> =item taint_env X<taint_env> =item taint_proper X<taint_proper> =item unlnk X<unlnk> =item unsharepvn X<unsharepvn> =item vdeb X<vdeb> =item vform X<vform> =item vload_module X<vload_module> =item vnewSVpvf X<vnewSVpvf> =item vwarner X<vwarner> =item warn_nocontext X<warn_nocontext> =item warner X<warner> =item warner_nocontext X<warner_nocontext> =item whichsig X<whichsig> =item whichsig_pv X<whichsig_pv> =item whichsig_pvn X<whichsig_pvn> =item whichsig_sv X<whichsig_sv> =back =head1 AUTHORS Until May 1997, this document was maintained by Jeff Okamoto <okamoto@corp.hp.com>. It is now maintained as part of Perl itself. With lots of help and suggestions from Dean Roehrich, Malcolm Beattie, Andreas Koenig, Paul Hudson, Ilya Zakharevich, Paul Marquess, Neil Bowers, Matthew Green, Tim Bunce, Spider Boardman, Ulrich Pfeifer, Stephen McCamant, and Gurusamy Sarathy. API Listing originally by Dean Roehrich <roehrich@cray.com>. Updated to be autogenerated from comments in the source by Benjamin Stuhl. =head1 SEE ALSO F<config.h> L<perlapio> L<perlcall> L<perlclib> L<perlfilter> L<perlguts> L<perlintern> L<perlmroapi> L<perlxs> L<perlxstut> L<warnings> =cut ex: set ro: perlos400.pod 0000644 00000011235 15125556335 0007014 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specially designed to be readable as is. =head1 NAME perlos400 - Perl version 5 on OS/400 B<This document needs to be updated, but we don't know what it should say. Please submit comments to L<https://github.com/Perl/perl5/issues>.> =head1 DESCRIPTION This document describes various features of IBM's OS/400 operating system that will affect how Perl version 5 (hereafter just Perl) is compiled and/or runs. By far the easiest way to build Perl for OS/400 is to use the PASE (Portable Application Solutions Environment), for more information see L<http://www.iseries.ibm.com/developer/factory/pase/index.html> This environment allows one to use AIX APIs while programming, and it provides a runtime that allows AIX binaries to execute directly on the PowerPC iSeries. =head2 Compiling Perl for OS/400 PASE The recommended way to build Perl for the OS/400 PASE is to build the Perl 5 source code (release 5.8.1 or later) under AIX. The trick is to give a special parameter to the Configure shell script when running it on AIX: sh Configure -DPASE ... The default installation directory of Perl under PASE is /QOpenSys/perl. This can be modified if needed with Configure parameter -Dprefix=/some/dir. Starting from OS/400 V5R2 the IBM Visual Age compiler is supported on OS/400 PASE, so it is possible to build Perl natively on OS/400. The easier way, however, is to compile in AIX, as just described. If you don't want to install the compiled Perl in AIX into /QOpenSys (for packaging it before copying it to PASE), you can use a Configure parameter: -Dinstallprefix=/tmp/QOpenSys/perl. This will cause the "make install" to install everything into that directory, while the installed files still think they are (will be) in /QOpenSys/perl. If building natively on PASE, please do the build under the /QOpenSys directory, since Perl is happier when built on a case sensitive filesystem. =head2 Installing Perl in OS/400 PASE If you are compiling on AIX, simply do a "make install" on the AIX box. Once the install finishes, tar up the /QOpenSys/perl directory. Transfer the tarball to the OS/400 using FTP with the following commands: > binary > site namefmt 1 > put perl.tar /QOpenSys Once you have it on, simply bring up a PASE shell and extract the tarball. If you are compiling in PASE, then "make install" is the only thing you will need to do. The default path for perl binary is /QOpenSys/perl/bin/perl. You'll want to symlink /QOpenSys/usr/bin/perl to this file so you don't have to modify your path. =head2 Using Perl in OS/400 PASE Perl in PASE may be used in the same manner as you would use Perl on AIX. Scripts starting with #!/usr/bin/perl should work if you have /QOpenSys/usr/bin/perl symlinked to your perl binary. This will not work if you've done a setuid/setgid or have environment variable PASE_EXEC_QOPENSYS="N". If you have V5R1, you'll need to get the latest PTFs to have this feature. Scripts starting with #!/QOpenSys/perl/bin/perl should always work. =head2 Known Problems When compiling in PASE, there is no "oslevel" command. Therefore, you may want to create a script called "oslevel" that echoes the level of AIX that your version of PASE runtime supports. If you're unsure, consult your documentation or use "4.3.3.0". If you have test cases that fail, check for the existence of spool files. The test case may be trying to use a syscall that is not implemented in PASE. To avoid the SIGILL, try setting the PASE_SYSCALL_NOSIGILL environment variable or have a handler for the SIGILL. If you can compile programs for PASE, run the config script and edit config.sh when it gives you the option. If you want to remove fchdir(), which isn't implement in V5R1, simply change the line that says: d_fchdir='define' to d_fchdir='undef' and then compile Perl. The places where fchdir() is used have alternatives for systems that do not have fchdir() available. =head2 Perl on ILE There exists a port of Perl to the ILE environment. This port, however, is based quite an old release of Perl, Perl 5.00502 (August 1998). (As of July 2002 the latest release of Perl is 5.8.0, and even 5.6.1 has been out since April 2001.) If you need to run Perl on ILE, though, you may need this older port: L<http://www.cpan.org/ports/#os400> Note that any Perl release later than 5.00502 has not been ported to ILE. If you need to use Perl in the ILE environment, you may want to consider using Qp2RunPase() to call the PASE version of Perl. =head1 AUTHORS Jarkko Hietaniemi <jhi@iki.fi> Bryan Logan <bryanlog@us.ibm.com> David Larson <larson1@us.ibm.com> =cut perlpacktut.pod 0000644 00000144252 15125556335 0007630 0 ustar 00 =head1 NAME perlpacktut - tutorial on C<pack> and C<unpack> =head1 DESCRIPTION C<pack> and C<unpack> are two functions for transforming data according to a user-defined template, between the guarded way Perl stores values and some well-defined representation as might be required in the environment of a Perl program. Unfortunately, they're also two of the most misunderstood and most often overlooked functions that Perl provides. This tutorial will demystify them for you. =head1 The Basic Principle Most programming languages don't shelter the memory where variables are stored. In C, for instance, you can take the address of some variable, and the C<sizeof> operator tells you how many bytes are allocated to the variable. Using the address and the size, you may access the storage to your heart's content. In Perl, you just can't access memory at random, but the structural and representational conversion provided by C<pack> and C<unpack> is an excellent alternative. The C<pack> function converts values to a byte sequence containing representations according to a given specification, the so-called "template" argument. C<unpack> is the reverse process, deriving some values from the contents of a string of bytes. (Be cautioned, however, that not all that has been packed together can be neatly unpacked - a very common experience as seasoned travellers are likely to confirm.) Why, you may ask, would you need a chunk of memory containing some values in binary representation? One good reason is input and output accessing some file, a device, or a network connection, whereby this binary representation is either forced on you or will give you some benefit in processing. Another cause is passing data to some system call that is not available as a Perl function: C<syscall> requires you to provide parameters stored in the way it happens in a C program. Even text processing (as shown in the next section) may be simplified with judicious usage of these two functions. To see how (un)packing works, we'll start with a simple template code where the conversion is in low gear: between the contents of a byte sequence and a string of hexadecimal digits. Let's use C<unpack>, since this is likely to remind you of a dump program, or some desperate last message unfortunate programs are wont to throw at you before they expire into the wild blue yonder. Assuming that the variable C<$mem> holds a sequence of bytes that we'd like to inspect without assuming anything about its meaning, we can write my( $hex ) = unpack( 'H*', $mem ); print "$hex\n"; whereupon we might see something like this, with each pair of hex digits corresponding to a byte: 41204d414e204120504c414e20412043414e414c2050414e414d41 What was in this chunk of memory? Numbers, characters, or a mixture of both? Assuming that we're on a computer where ASCII (or some similar) encoding is used: hexadecimal values in the range C<0x40> - C<0x5A> indicate an uppercase letter, and C<0x20> encodes a space. So we might assume it is a piece of text, which some are able to read like a tabloid; but others will have to get hold of an ASCII table and relive that firstgrader feeling. Not caring too much about which way to read this, we note that C<unpack> with the template code C<H> converts the contents of a sequence of bytes into the customary hexadecimal notation. Since "a sequence of" is a pretty vague indication of quantity, C<H> has been defined to convert just a single hexadecimal digit unless it is followed by a repeat count. An asterisk for the repeat count means to use whatever remains. The inverse operation - packing byte contents from a string of hexadecimal digits - is just as easily written. For instance: my $s = pack( 'H2' x 10, 30..39 ); print "$s\n"; Since we feed a list of ten 2-digit hexadecimal strings to C<pack>, the pack template should contain ten pack codes. If this is run on a computer with ASCII character coding, it will print C<0123456789>. =head1 Packing Text Let's suppose you've got to read in a data file like this: Date |Description | Income|Expenditure 01/24/2001 Zed's Camel Emporium 1147.99 01/28/2001 Flea spray 24.99 01/29/2001 Camel rides to tourists 235.00 How do we do it? You might think first to use C<split>; however, since C<split> collapses blank fields, you'll never know whether a record was income or expenditure. Oops. Well, you could always use C<substr>: while (<>) { my $date = substr($_, 0, 11); my $desc = substr($_, 12, 27); my $income = substr($_, 40, 7); my $expend = substr($_, 52, 7); ... } It's not really a barrel of laughs, is it? In fact, it's worse than it may seem; the eagle-eyed may notice that the first field should only be 10 characters wide, and the error has propagated right through the other numbers - which we've had to count by hand. So it's error-prone as well as horribly unfriendly. Or maybe we could use regular expressions: while (<>) { my($date, $desc, $income, $expend) = m|(\d\d/\d\d/\d{4}) (.{27}) (.{7})(.*)|; ... } Urgh. Well, it's a bit better, but - well, would you want to maintain that? Hey, isn't Perl supposed to make this sort of thing easy? Well, it does, if you use the right tools. C<pack> and C<unpack> are designed to help you out when dealing with fixed-width data like the above. Let's have a look at a solution with C<unpack>: while (<>) { my($date, $desc, $income, $expend) = unpack("A10xA27xA7A*", $_); ... } That looks a bit nicer; but we've got to take apart that weird template. Where did I pull that out of? OK, let's have a look at some of our data again; in fact, we'll include the headers, and a handy ruler so we can keep track of where we are. 1 2 3 4 5 1234567890123456789012345678901234567890123456789012345678 Date |Description | Income|Expenditure 01/28/2001 Flea spray 24.99 01/29/2001 Camel rides to tourists 235.00 From this, we can see that the date column stretches from column 1 to column 10 - ten characters wide. The C<pack>-ese for "character" is C<A>, and ten of them are C<A10>. So if we just wanted to extract the dates, we could say this: my($date) = unpack("A10", $_); OK, what's next? Between the date and the description is a blank column; we want to skip over that. The C<x> template means "skip forward", so we want one of those. Next, we have another batch of characters, from 12 to 38. That's 27 more characters, hence C<A27>. (Don't make the fencepost error - there are 27 characters between 12 and 38, not 26. Count 'em!) Now we skip another character and pick up the next 7 characters: my($date,$description,$income) = unpack("A10xA27xA7", $_); Now comes the clever bit. Lines in our ledger which are just income and not expenditure might end at column 46. Hence, we don't want to tell our C<unpack> pattern that we B<need> to find another 12 characters; we'll just say "if there's anything left, take it". As you might guess from regular expressions, that's what the C<*> means: "use everything remaining". =over 3 =item * Be warned, though, that unlike regular expressions, if the C<unpack> template doesn't match the incoming data, Perl will scream and die. =back Hence, putting it all together: my ($date, $description, $income, $expend) = unpack("A10xA27xA7xA*", $_); Now, that's our data parsed. I suppose what we might want to do now is total up our income and expenditure, and add another line to the end of our ledger - in the same format - saying how much we've brought in and how much we've spent: while (<>) { my ($date, $desc, $income, $expend) = unpack("A10xA27xA7xA*", $_); $tot_income += $income; $tot_expend += $expend; } $tot_income = sprintf("%.2f", $tot_income); # Get them into $tot_expend = sprintf("%.2f", $tot_expend); # "financial" format $date = POSIX::strftime("%m/%d/%Y", localtime); # OK, let's go: print pack("A10xA27xA7xA*", $date, "Totals", $tot_income, $tot_expend); Oh, hmm. That didn't quite work. Let's see what happened: 01/24/2001 Zed's Camel Emporium 1147.99 01/28/2001 Flea spray 24.99 01/29/2001 Camel rides to tourists 1235.00 03/23/2001Totals 1235.001172.98 OK, it's a start, but what happened to the spaces? We put C<x>, didn't we? Shouldn't it skip forward? Let's look at what L<perlfunc/pack> says: x A null byte. Urgh. No wonder. There's a big difference between "a null byte", character zero, and "a space", character 32. Perl's put something between the date and the description - but unfortunately, we can't see it! What we actually need to do is expand the width of the fields. The C<A> format pads any non-existent characters with spaces, so we can use the additional spaces to line up our fields, like this: print pack("A11 A28 A8 A*", $date, "Totals", $tot_income, $tot_expend); (Note that you can put spaces in the template to make it more readable, but they don't translate to spaces in the output.) Here's what we got this time: 01/24/2001 Zed's Camel Emporium 1147.99 01/28/2001 Flea spray 24.99 01/29/2001 Camel rides to tourists 1235.00 03/23/2001 Totals 1235.00 1172.98 That's a bit better, but we still have that last column which needs to be moved further over. There's an easy way to fix this up: unfortunately, we can't get C<pack> to right-justify our fields, but we can get C<sprintf> to do it: $tot_income = sprintf("%.2f", $tot_income); $tot_expend = sprintf("%12.2f", $tot_expend); $date = POSIX::strftime("%m/%d/%Y", localtime); print pack("A11 A28 A8 A*", $date, "Totals", $tot_income, $tot_expend); This time we get the right answer: 01/28/2001 Flea spray 24.99 01/29/2001 Camel rides to tourists 1235.00 03/23/2001 Totals 1235.00 1172.98 So that's how we consume and produce fixed-width data. Let's recap what we've seen of C<pack> and C<unpack> so far: =over 3 =item * Use C<pack> to go from several pieces of data to one fixed-width version; use C<unpack> to turn a fixed-width-format string into several pieces of data. =item * The pack format C<A> means "any character"; if you're C<pack>ing and you've run out of things to pack, C<pack> will fill the rest up with spaces. =item * C<x> means "skip a byte" when C<unpack>ing; when C<pack>ing, it means "introduce a null byte" - that's probably not what you mean if you're dealing with plain text. =item * You can follow the formats with numbers to say how many characters should be affected by that format: C<A12> means "take 12 characters"; C<x6> means "skip 6 bytes" or "character 0, 6 times". =item * Instead of a number, you can use C<*> to mean "consume everything else left". B<Warning>: when packing multiple pieces of data, C<*> only means "consume all of the current piece of data". That's to say pack("A*A*", $one, $two) packs all of C<$one> into the first C<A*> and then all of C<$two> into the second. This is a general principle: each format character corresponds to one piece of data to be C<pack>ed. =back =head1 Packing Numbers So much for textual data. Let's get onto the meaty stuff that C<pack> and C<unpack> are best at: handling binary formats for numbers. There is, of course, not just one binary format - life would be too simple - but Perl will do all the finicky labor for you. =head2 Integers Packing and unpacking numbers implies conversion to and from some I<specific> binary representation. Leaving floating point numbers aside for the moment, the salient properties of any such representation are: =over 4 =item * the number of bytes used for storing the integer, =item * whether the contents are interpreted as a signed or unsigned number, =item * the byte ordering: whether the first byte is the least or most significant byte (or: little-endian or big-endian, respectively). =back So, for instance, to pack 20302 to a signed 16 bit integer in your computer's representation you write my $ps = pack( 's', 20302 ); Again, the result is a string, now containing 2 bytes. If you print this string (which is, generally, not recommended) you might see C<ON> or C<NO> (depending on your system's byte ordering) - or something entirely different if your computer doesn't use ASCII character encoding. Unpacking C<$ps> with the same template returns the original integer value: my( $s ) = unpack( 's', $ps ); This is true for all numeric template codes. But don't expect miracles: if the packed value exceeds the allotted byte capacity, high order bits are silently discarded, and unpack certainly won't be able to pull them back out of some magic hat. And, when you pack using a signed template code such as C<s>, an excess value may result in the sign bit getting set, and unpacking this will smartly return a negative value. 16 bits won't get you too far with integers, but there is C<l> and C<L> for signed and unsigned 32-bit integers. And if this is not enough and your system supports 64 bit integers you can push the limits much closer to infinity with pack codes C<q> and C<Q>. A notable exception is provided by pack codes C<i> and C<I> for signed and unsigned integers of the "local custom" variety: Such an integer will take up as many bytes as a local C compiler returns for C<sizeof(int)>, but it'll use I<at least> 32 bits. Each of the integer pack codes C<sSlLqQ> results in a fixed number of bytes, no matter where you execute your program. This may be useful for some applications, but it does not provide for a portable way to pass data structures between Perl and C programs (bound to happen when you call XS extensions or the Perl function C<syscall>), or when you read or write binary files. What you'll need in this case are template codes that depend on what your local C compiler compiles when you code C<short> or C<unsigned long>, for instance. These codes and their corresponding byte lengths are shown in the table below. Since the C standard leaves much leeway with respect to the relative sizes of these data types, actual values may vary, and that's why the values are given as expressions in C and Perl. (If you'd like to use values from C<%Config> in your program you have to import it with C<use Config>.) signed unsigned byte length in C byte length in Perl s! S! sizeof(short) $Config{shortsize} i! I! sizeof(int) $Config{intsize} l! L! sizeof(long) $Config{longsize} q! Q! sizeof(long long) $Config{longlongsize} The C<i!> and C<I!> codes aren't different from C<i> and C<I>; they are tolerated for completeness' sake. =head2 Unpacking a Stack Frame Requesting a particular byte ordering may be necessary when you work with binary data coming from some specific architecture whereas your program could run on a totally different system. As an example, assume you have 24 bytes containing a stack frame as it happens on an Intel 8086: +---------+ +----+----+ +---------+ TOS: | IP | TOS+4:| FL | FH | FLAGS TOS+14:| SI | +---------+ +----+----+ +---------+ | CS | | AL | AH | AX | DI | +---------+ +----+----+ +---------+ | BL | BH | BX | BP | +----+----+ +---------+ | CL | CH | CX | DS | +----+----+ +---------+ | DL | DH | DX | ES | +----+----+ +---------+ First, we note that this time-honored 16-bit CPU uses little-endian order, and that's why the low order byte is stored at the lower address. To unpack such a (unsigned) short we'll have to use code C<v>. A repeat count unpacks all 12 shorts: my( $ip, $cs, $flags, $ax, $bx, $cd, $dx, $si, $di, $bp, $ds, $es ) = unpack( 'v12', $frame ); Alternatively, we could have used C<C> to unpack the individually accessible byte registers FL, FH, AL, AH, etc.: my( $fl, $fh, $al, $ah, $bl, $bh, $cl, $ch, $dl, $dh ) = unpack( 'C10', substr( $frame, 4, 10 ) ); It would be nice if we could do this in one fell swoop: unpack a short, back up a little, and then unpack 2 bytes. Since Perl I<is> nice, it proffers the template code C<X> to back up one byte. Putting this all together, we may now write: my( $ip, $cs, $flags,$fl,$fh, $ax,$al,$ah, $bx,$bl,$bh, $cx,$cl,$ch, $dx,$dl,$dh, $si, $di, $bp, $ds, $es ) = unpack( 'v2' . ('vXXCC' x 5) . 'v5', $frame ); (The clumsy construction of the template can be avoided - just read on!) We've taken some pains to construct the template so that it matches the contents of our frame buffer. Otherwise we'd either get undefined values, or C<unpack> could not unpack all. If C<pack> runs out of items, it will supply null strings (which are coerced into zeroes whenever the pack code says so). =head2 How to Eat an Egg on a Net The pack code for big-endian (high order byte at the lowest address) is C<n> for 16 bit and C<N> for 32 bit integers. You use these codes if you know that your data comes from a compliant architecture, but, surprisingly enough, you should also use these pack codes if you exchange binary data, across the network, with some system that you know next to nothing about. The simple reason is that this order has been chosen as the I<network order>, and all standard-fearing programs ought to follow this convention. (This is, of course, a stern backing for one of the Lilliputian parties and may well influence the political development there.) So, if the protocol expects you to send a message by sending the length first, followed by just so many bytes, you could write: my $buf = pack( 'N', length( $msg ) ) . $msg; or even: my $buf = pack( 'NA*', length( $msg ), $msg ); and pass C<$buf> to your send routine. Some protocols demand that the count should include the length of the count itself: then just add 4 to the data length. (But make sure to read L</"Lengths and Widths"> before you really code this!) =head2 Byte-order modifiers In the previous sections we've learned how to use C<n>, C<N>, C<v> and C<V> to pack and unpack integers with big- or little-endian byte-order. While this is nice, it's still rather limited because it leaves out all kinds of signed integers as well as 64-bit integers. For example, if you wanted to unpack a sequence of signed big-endian 16-bit integers in a platform-independent way, you would have to write: my @data = unpack 's*', pack 'S*', unpack 'n*', $buf; This is ugly. As of Perl 5.9.2, there's a much nicer way to express your desire for a certain byte-order: the C<E<gt>> and C<E<lt>> modifiers. C<E<gt>> is the big-endian modifier, while C<E<lt>> is the little-endian modifier. Using them, we could rewrite the above code as: my @data = unpack 's>*', $buf; As you can see, the "big end" of the arrow touches the C<s>, which is a nice way to remember that C<E<gt>> is the big-endian modifier. The same obviously works for C<E<lt>>, where the "little end" touches the code. You will probably find these modifiers even more useful if you have to deal with big- or little-endian C structures. Be sure to read L</"Packing and Unpacking C Structures"> for more on that. =head2 Floating point Numbers For packing floating point numbers you have the choice between the pack codes C<f>, C<d>, C<F> and C<D>. C<f> and C<d> pack into (or unpack from) single-precision or double-precision representation as it is provided by your system. If your systems supports it, C<D> can be used to pack and unpack (C<long double>) values, which can offer even more resolution than C<f> or C<d>. B<Note that there are different long double formats.> C<F> packs an C<NV>, which is the floating point type used by Perl internally. There is no such thing as a network representation for reals, so if you want to send your real numbers across computer boundaries, you'd better stick to text representation, possibly using the hexadecimal float format (avoiding the decimal conversion loss), unless you're absolutely sure what's on the other end of the line. For the even more adventuresome, you can use the byte-order modifiers from the previous section also on floating point codes. =head1 Exotic Templates =head2 Bit Strings Bits are the atoms in the memory world. Access to individual bits may have to be used either as a last resort or because it is the most convenient way to handle your data. Bit string (un)packing converts between strings containing a series of C<0> and C<1> characters and a sequence of bytes each containing a group of 8 bits. This is almost as simple as it sounds, except that there are two ways the contents of a byte may be written as a bit string. Let's have a look at an annotated byte: 7 6 5 4 3 2 1 0 +-----------------+ | 1 0 0 0 1 1 0 0 | +-----------------+ MSB LSB It's egg-eating all over again: Some think that as a bit string this should be written "10001100" i.e. beginning with the most significant bit, others insist on "00110001". Well, Perl isn't biased, so that's why we have two bit string codes: $byte = pack( 'B8', '10001100' ); # start with MSB $byte = pack( 'b8', '00110001' ); # start with LSB It is not possible to pack or unpack bit fields - just integral bytes. C<pack> always starts at the next byte boundary and "rounds up" to the next multiple of 8 by adding zero bits as required. (If you do want bit fields, there is L<perlfunc/vec>. Or you could implement bit field handling at the character string level, using split, substr, and concatenation on unpacked bit strings.) To illustrate unpacking for bit strings, we'll decompose a simple status register (a "-" stands for a "reserved" bit): +-----------------+-----------------+ | S Z - A - P - C | - - - - O D I T | +-----------------+-----------------+ MSB LSB MSB LSB Converting these two bytes to a string can be done with the unpack template C<'b16'>. To obtain the individual bit values from the bit string we use C<split> with the "empty" separator pattern which dissects into individual characters. Bit values from the "reserved" positions are simply assigned to C<undef>, a convenient notation for "I don't care where this goes". ($carry, undef, $parity, undef, $auxcarry, undef, $zero, $sign, $trace, $interrupt, $direction, $overflow) = split( //, unpack( 'b16', $status ) ); We could have used an unpack template C<'b12'> just as well, since the last 4 bits can be ignored anyway. =head2 Uuencoding Another odd-man-out in the template alphabet is C<u>, which packs a "uuencoded string". ("uu" is short for Unix-to-Unix.) Chances are that you won't ever need this encoding technique which was invented to overcome the shortcomings of old-fashioned transmission mediums that do not support other than simple ASCII data. The essential recipe is simple: Take three bytes, or 24 bits. Split them into 4 six-packs, adding a space (0x20) to each. Repeat until all of the data is blended. Fold groups of 4 bytes into lines no longer than 60 and garnish them in front with the original byte count (incremented by 0x20) and a C<"\n"> at the end. - The C<pack> chef will prepare this for you, a la minute, when you select pack code C<u> on the menu: my $uubuf = pack( 'u', $bindat ); A repeat count after C<u> sets the number of bytes to put into an uuencoded line, which is the maximum of 45 by default, but could be set to some (smaller) integer multiple of three. C<unpack> simply ignores the repeat count. =head2 Doing Sums An even stranger template code is C<%>E<lt>I<number>E<gt>. First, because it's used as a prefix to some other template code. Second, because it cannot be used in C<pack> at all, and third, in C<unpack>, doesn't return the data as defined by the template code it precedes. Instead it'll give you an integer of I<number> bits that is computed from the data value by doing sums. For numeric unpack codes, no big feat is achieved: my $buf = pack( 'iii', 100, 20, 3 ); print unpack( '%32i3', $buf ), "\n"; # prints 123 For string values, C<%> returns the sum of the byte values saving you the trouble of a sum loop with C<substr> and C<ord>: print unpack( '%32A*', "\x01\x10" ), "\n"; # prints 17 Although the C<%> code is documented as returning a "checksum": don't put your trust in such values! Even when applied to a small number of bytes, they won't guarantee a noticeable Hamming distance. In connection with C<b> or C<B>, C<%> simply adds bits, and this can be put to good use to count set bits efficiently: my $bitcount = unpack( '%32b*', $mask ); And an even parity bit can be determined like this: my $evenparity = unpack( '%1b*', $mask ); =head2 Unicode Unicode is a character set that can represent most characters in most of the world's languages, providing room for over one million different characters. Unicode 3.1 specifies 94,140 characters: The Basic Latin characters are assigned to the numbers 0 - 127. The Latin-1 Supplement with characters that are used in several European languages is in the next range, up to 255. After some more Latin extensions we find the character sets from languages using non-Roman alphabets, interspersed with a variety of symbol sets such as currency symbols, Zapf Dingbats or Braille. (You might want to visit L<https://www.unicode.org/> for a look at some of them - my personal favourites are Telugu and Kannada.) The Unicode character sets associates characters with integers. Encoding these numbers in an equal number of bytes would more than double the requirements for storing texts written in Latin alphabets. The UTF-8 encoding avoids this by storing the most common (from a western point of view) characters in a single byte while encoding the rarer ones in three or more bytes. Perl uses UTF-8, internally, for most Unicode strings. So what has this got to do with C<pack>? Well, if you want to compose a Unicode string (that is internally encoded as UTF-8), you can do so by using template code C<U>. As an example, let's produce the Euro currency symbol (code number 0x20AC): $UTF8{Euro} = pack( 'U', 0x20AC ); # Equivalent to: $UTF8{Euro} = "\x{20ac}"; Inspecting C<$UTF8{Euro}> shows that it contains 3 bytes: "\xe2\x82\xac". However, it contains only 1 character, number 0x20AC. The round trip can be completed with C<unpack>: $Unicode{Euro} = unpack( 'U', $UTF8{Euro} ); Unpacking using the C<U> template code also works on UTF-8 encoded byte strings. Usually you'll want to pack or unpack UTF-8 strings: # pack and unpack the Hebrew alphabet my $alefbet = pack( 'U*', 0x05d0..0x05ea ); my @hebrew = unpack( 'U*', $utf ); Please note: in the general case, you're better off using L<C<Encode::decode('UTF-8', $utf)>|Encode/decode> to decode a UTF-8 encoded byte string to a Perl Unicode string, and L<C<Encode::encode('UTF-8', $str)>|Encode/encode> to encode a Perl Unicode string to UTF-8 bytes. These functions provide means of handling invalid byte sequences and generally have a friendlier interface. =head2 Another Portable Binary Encoding The pack code C<w> has been added to support a portable binary data encoding scheme that goes way beyond simple integers. (Details can be found at L<https://github.com/mworks-project/mw_scarab/blob/master/Scarab-0.1.00d19/doc/binary-serialization.txt>, the Scarab project.) A BER (Binary Encoded Representation) compressed unsigned integer stores base 128 digits, most significant digit first, with as few digits as possible. Bit eight (the high bit) is set on each byte except the last. There is no size limit to BER encoding, but Perl won't go to extremes. my $berbuf = pack( 'w*', 1, 128, 128+1, 128*128+127 ); A hex dump of C<$berbuf>, with spaces inserted at the right places, shows 01 8100 8101 81807F. Since the last byte is always less than 128, C<unpack> knows where to stop. =head1 Template Grouping Prior to Perl 5.8, repetitions of templates had to be made by C<x>-multiplication of template strings. Now there is a better way as we may use the pack codes C<(> and C<)> combined with a repeat count. The C<unpack> template from the Stack Frame example can simply be written like this: unpack( 'v2 (vXXCC)5 v5', $frame ) Let's explore this feature a little more. We'll begin with the equivalent of join( '', map( substr( $_, 0, 1 ), @str ) ) which returns a string consisting of the first character from each string. Using pack, we can write pack( '(A)'.@str, @str ) or, because a repeat count C<*> means "repeat as often as required", simply pack( '(A)*', @str ) (Note that the template C<A*> would only have packed C<$str[0]> in full length.) To pack dates stored as triplets ( day, month, year ) in an array C<@dates> into a sequence of byte, byte, short integer we can write $pd = pack( '(CCS)*', map( @$_, @dates ) ); To swap pairs of characters in a string (with even length) one could use several techniques. First, let's use C<x> and C<X> to skip forward and back: $s = pack( '(A)*', unpack( '(xAXXAx)*', $s ) ); We can also use C<@> to jump to an offset, with 0 being the position where we were when the last C<(> was encountered: $s = pack( '(A)*', unpack( '(@1A @0A @2)*', $s ) ); Finally, there is also an entirely different approach by unpacking big endian shorts and packing them in the reverse byte order: $s = pack( '(v)*', unpack( '(n)*', $s ); =head1 Lengths and Widths =head2 String Lengths In the previous section we've seen a network message that was constructed by prefixing the binary message length to the actual message. You'll find that packing a length followed by so many bytes of data is a frequently used recipe since appending a null byte won't work if a null byte may be part of the data. Here is an example where both techniques are used: after two null terminated strings with source and destination address, a Short Message (to a mobile phone) is sent after a length byte: my $msg = pack( 'Z*Z*CA*', $src, $dst, length( $sm ), $sm ); Unpacking this message can be done with the same template: ( $src, $dst, $len, $sm ) = unpack( 'Z*Z*CA*', $msg ); There's a subtle trap lurking in the offing: Adding another field after the Short Message (in variable C<$sm>) is all right when packing, but this cannot be unpacked naively: # pack a message my $msg = pack( 'Z*Z*CA*C', $src, $dst, length( $sm ), $sm, $prio ); # unpack fails - $prio remains undefined! ( $src, $dst, $len, $sm, $prio ) = unpack( 'Z*Z*CA*C', $msg ); The pack code C<A*> gobbles up all remaining bytes, and C<$prio> remains undefined! Before we let disappointment dampen the morale: Perl's got the trump card to make this trick too, just a little further up the sleeve. Watch this: # pack a message: ASCIIZ, ASCIIZ, length/string, byte my $msg = pack( 'Z* Z* C/A* C', $src, $dst, $sm, $prio ); # unpack ( $src, $dst, $sm, $prio ) = unpack( 'Z* Z* C/A* C', $msg ); Combining two pack codes with a slash (C</>) associates them with a single value from the argument list. In C<pack>, the length of the argument is taken and packed according to the first code while the argument itself is added after being converted with the template code after the slash. This saves us the trouble of inserting the C<length> call, but it is in C<unpack> where we really score: The value of the length byte marks the end of the string to be taken from the buffer. Since this combination doesn't make sense except when the second pack code isn't C<a*>, C<A*> or C<Z*>, Perl won't let you. The pack code preceding C</> may be anything that's fit to represent a number: All the numeric binary pack codes, and even text codes such as C<A4> or C<Z*>: # pack/unpack a string preceded by its length in ASCII my $buf = pack( 'A4/A*', "Humpty-Dumpty" ); # unpack $buf: '13 Humpty-Dumpty' my $txt = unpack( 'A4/A*', $buf ); C</> is not implemented in Perls before 5.6, so if your code is required to work on ancient Perls you'll need to C<unpack( 'Z* Z* C')> to get the length, then use it to make a new unpack string. For example # pack a message: ASCIIZ, ASCIIZ, length, string, byte # (5.005 compatible) my $msg = pack( 'Z* Z* C A* C', $src, $dst, length $sm, $sm, $prio ); # unpack ( undef, undef, $len) = unpack( 'Z* Z* C', $msg ); ($src, $dst, $sm, $prio) = unpack ( "Z* Z* x A$len C", $msg ); But that second C<unpack> is rushing ahead. It isn't using a simple literal string for the template. So maybe we should introduce... =head2 Dynamic Templates So far, we've seen literals used as templates. If the list of pack items doesn't have fixed length, an expression constructing the template is required (whenever, for some reason, C<()*> cannot be used). Here's an example: To store named string values in a way that can be conveniently parsed by a C program, we create a sequence of names and null terminated ASCII strings, with C<=> between the name and the value, followed by an additional delimiting null byte. Here's how: my $env = pack( '(A*A*Z*)' . keys( %Env ) . 'C', map( { ( $_, '=', $Env{$_} ) } keys( %Env ) ), 0 ); Let's examine the cogs of this byte mill, one by one. There's the C<map> call, creating the items we intend to stuff into the C<$env> buffer: to each key (in C<$_>) it adds the C<=> separator and the hash entry value. Each triplet is packed with the template code sequence C<A*A*Z*> that is repeated according to the number of keys. (Yes, that's what the C<keys> function returns in scalar context.) To get the very last null byte, we add a C<0> at the end of the C<pack> list, to be packed with C<C>. (Attentive readers may have noticed that we could have omitted the 0.) For the reverse operation, we'll have to determine the number of items in the buffer before we can let C<unpack> rip it apart: my $n = $env =~ tr/\0// - 1; my %env = map( split( /=/, $_ ), unpack( "(Z*)$n", $env ) ); The C<tr> counts the null bytes. The C<unpack> call returns a list of name-value pairs each of which is taken apart in the C<map> block. =head2 Counting Repetitions Rather than storing a sentinel at the end of a data item (or a list of items), we could precede the data with a count. Again, we pack keys and values of a hash, preceding each with an unsigned short length count, and up front we store the number of pairs: my $env = pack( 'S(S/A* S/A*)*', scalar keys( %Env ), %Env ); This simplifies the reverse operation as the number of repetitions can be unpacked with the C</> code: my %env = unpack( 'S/(S/A* S/A*)', $env ); Note that this is one of the rare cases where you cannot use the same template for C<pack> and C<unpack> because C<pack> can't determine a repeat count for a C<()>-group. =head2 Intel HEX Intel HEX is a file format for representing binary data, mostly for programming various chips, as a text file. (See L<https://en.wikipedia.org/wiki/.hex> for a detailed description, and L<https://en.wikipedia.org/wiki/SREC_(file_format)> for the Motorola S-record format, which can be unravelled using the same technique.) Each line begins with a colon (':') and is followed by a sequence of hexadecimal characters, specifying a byte count I<n> (8 bit), an address (16 bit, big endian), a record type (8 bit), I<n> data bytes and a checksum (8 bit) computed as the least significant byte of the two's complement sum of the preceding bytes. Example: C<:0300300002337A1E>. The first step of processing such a line is the conversion, to binary, of the hexadecimal data, to obtain the four fields, while checking the checksum. No surprise here: we'll start with a simple C<pack> call to convert everything to binary: my $binrec = pack( 'H*', substr( $hexrec, 1 ) ); The resulting byte sequence is most convenient for checking the checksum. Don't slow your program down with a for loop adding the C<ord> values of this string's bytes - the C<unpack> code C<%> is the thing to use for computing the 8-bit sum of all bytes, which must be equal to zero: die unless unpack( "%8C*", $binrec ) == 0; Finally, let's get those four fields. By now, you shouldn't have any problems with the first three fields - but how can we use the byte count of the data in the first field as a length for the data field? Here the codes C<x> and C<X> come to the rescue, as they permit jumping back and forth in the string to unpack. my( $addr, $type, $data ) = unpack( "x n C X4 C x3 /a", $bin ); Code C<x> skips a byte, since we don't need the count yet. Code C<n> takes care of the 16-bit big-endian integer address, and C<C> unpacks the record type. Being at offset 4, where the data begins, we need the count. C<X4> brings us back to square one, which is the byte at offset 0. Now we pick up the count, and zoom forth to offset 4, where we are now fully furnished to extract the exact number of data bytes, leaving the trailing checksum byte alone. =head1 Packing and Unpacking C Structures In previous sections we have seen how to pack numbers and character strings. If it were not for a couple of snags we could conclude this section right away with the terse remark that C structures don't contain anything else, and therefore you already know all there is to it. Sorry, no: read on, please. If you have to deal with a lot of C structures, and don't want to hack all your template strings manually, you'll probably want to have a look at the CPAN module C<Convert::Binary::C>. Not only can it parse your C source directly, but it also has built-in support for all the odds and ends described further on in this section. =head2 The Alignment Pit In the consideration of speed against memory requirements the balance has been tilted in favor of faster execution. This has influenced the way C compilers allocate memory for structures: On architectures where a 16-bit or 32-bit operand can be moved faster between places in memory, or to or from a CPU register, if it is aligned at an even or multiple-of-four or even at a multiple-of eight address, a C compiler will give you this speed benefit by stuffing extra bytes into structures. If you don't cross the C shoreline this is not likely to cause you any grief (although you should care when you design large data structures, or you want your code to be portable between architectures (you do want that, don't you?)). To see how this affects C<pack> and C<unpack>, we'll compare these two C structures: typedef struct { char c1; short s; char c2; long l; } gappy_t; typedef struct { long l; short s; char c1; char c2; } dense_t; Typically, a C compiler allocates 12 bytes to a C<gappy_t> variable, but requires only 8 bytes for a C<dense_t>. After investigating this further, we can draw memory maps, showing where the extra 4 bytes are hidden: 0 +4 +8 +12 +--+--+--+--+--+--+--+--+--+--+--+--+ |c1|xx| s |c2|xx|xx|xx| l | xx = fill byte +--+--+--+--+--+--+--+--+--+--+--+--+ gappy_t 0 +4 +8 +--+--+--+--+--+--+--+--+ | l | h |c1|c2| +--+--+--+--+--+--+--+--+ dense_t And that's where the first quirk strikes: C<pack> and C<unpack> templates have to be stuffed with C<x> codes to get those extra fill bytes. The natural question: "Why can't Perl compensate for the gaps?" warrants an answer. One good reason is that C compilers might provide (non-ANSI) extensions permitting all sorts of fancy control over the way structures are aligned, even at the level of an individual structure field. And, if this were not enough, there is an insidious thing called C<union> where the amount of fill bytes cannot be derived from the alignment of the next item alone. OK, so let's bite the bullet. Here's one way to get the alignment right by inserting template codes C<x>, which don't take a corresponding item from the list: my $gappy = pack( 'cxs cxxx l!', $c1, $s, $c2, $l ); Note the C<!> after C<l>: We want to make sure that we pack a long integer as it is compiled by our C compiler. And even now, it will only work for the platforms where the compiler aligns things as above. And somebody somewhere has a platform where it doesn't. [Probably a Cray, where C<short>s, C<int>s and C<long>s are all 8 bytes. :-)] Counting bytes and watching alignments in lengthy structures is bound to be a drag. Isn't there a way we can create the template with a simple program? Here's a C program that does the trick: #include <stdio.h> #include <stddef.h> typedef struct { char fc1; short fs; char fc2; long fl; } gappy_t; #define Pt(struct,field,tchar) \ printf( "@%d%s ", offsetof(struct,field), # tchar ); int main() { Pt( gappy_t, fc1, c ); Pt( gappy_t, fs, s! ); Pt( gappy_t, fc2, c ); Pt( gappy_t, fl, l! ); printf( "\n" ); } The output line can be used as a template in a C<pack> or C<unpack> call: my $gappy = pack( '@0c @2s! @4c @8l!', $c1, $s, $c2, $l ); Gee, yet another template code - as if we hadn't plenty. But C<@> saves our day by enabling us to specify the offset from the beginning of the pack buffer to the next item: This is just the value the C<offsetof> macro (defined in C<E<lt>stddef.hE<gt>>) returns when given a C<struct> type and one of its field names ("member-designator" in C standardese). Neither using offsets nor adding C<x>'s to bridge the gaps is satisfactory. (Just imagine what happens if the structure changes.) What we really need is a way of saying "skip as many bytes as required to the next multiple of N". In fluent Templatese, you say this with C<x!N> where N is replaced by the appropriate value. Here's the next version of our struct packaging: my $gappy = pack( 'c x!2 s c x!4 l!', $c1, $s, $c2, $l ); That's certainly better, but we still have to know how long all the integers are, and portability is far away. Rather than C<2>, for instance, we want to say "however long a short is". But this can be done by enclosing the appropriate pack code in brackets: C<[s]>. So, here's the very best we can do: my $gappy = pack( 'c x![s] s c x![l!] l!', $c1, $s, $c2, $l ); =head2 Dealing with Endian-ness Now, imagine that we want to pack the data for a machine with a different byte-order. First, we'll have to figure out how big the data types on the target machine really are. Let's assume that the longs are 32 bits wide and the shorts are 16 bits wide. You can then rewrite the template as: my $gappy = pack( 'c x![s] s c x![l] l', $c1, $s, $c2, $l ); If the target machine is little-endian, we could write: my $gappy = pack( 'c x![s] s< c x![l] l<', $c1, $s, $c2, $l ); This forces the short and the long members to be little-endian, and is just fine if you don't have too many struct members. But we could also use the byte-order modifier on a group and write the following: my $gappy = pack( '( c x![s] s c x![l] l )<', $c1, $s, $c2, $l ); This is not as short as before, but it makes it more obvious that we intend to have little-endian byte-order for a whole group, not only for individual template codes. It can also be more readable and easier to maintain. =head2 Alignment, Take 2 I'm afraid that we're not quite through with the alignment catch yet. The hydra raises another ugly head when you pack arrays of structures: typedef struct { short count; char glyph; } cell_t; typedef cell_t buffer_t[BUFLEN]; Where's the catch? Padding is neither required before the first field C<count>, nor between this and the next field C<glyph>, so why can't we simply pack like this: # something goes wrong here: pack( 's!a' x @buffer, map{ ( $_->{count}, $_->{glyph} ) } @buffer ); This packs C<3*@buffer> bytes, but it turns out that the size of C<buffer_t> is four times C<BUFLEN>! The moral of the story is that the required alignment of a structure or array is propagated to the next higher level where we have to consider padding I<at the end> of each component as well. Thus the correct template is: pack( 's!ax' x @buffer, map{ ( $_->{count}, $_->{glyph} ) } @buffer ); =head2 Alignment, Take 3 And even if you take all the above into account, ANSI still lets this: typedef struct { char foo[2]; } foo_t; vary in size. The alignment constraint of the structure can be greater than any of its elements. [And if you think that this doesn't affect anything common, dismember the next cellphone that you see. Many have ARM cores, and the ARM structure rules make C<sizeof (foo_t)> == 4] =head2 Pointers for How to Use Them The title of this section indicates the second problem you may run into sooner or later when you pack C structures. If the function you intend to call expects a, say, C<void *> value, you I<cannot> simply take a reference to a Perl variable. (Although that value certainly is a memory address, it's not the address where the variable's contents are stored.) Template code C<P> promises to pack a "pointer to a fixed length string". Isn't this what we want? Let's try: # allocate some storage and pack a pointer to it my $memory = "\x00" x $size; my $memptr = pack( 'P', $memory ); But wait: doesn't C<pack> just return a sequence of bytes? How can we pass this string of bytes to some C code expecting a pointer which is, after all, nothing but a number? The answer is simple: We have to obtain the numeric address from the bytes returned by C<pack>. my $ptr = unpack( 'L!', $memptr ); Obviously this assumes that it is possible to typecast a pointer to an unsigned long and vice versa, which frequently works but should not be taken as a universal law. - Now that we have this pointer the next question is: How can we put it to good use? We need a call to some C function where a pointer is expected. The read(2) system call comes to mind: ssize_t read(int fd, void *buf, size_t count); After reading L<perlfunc> explaining how to use C<syscall> we can write this Perl function copying a file to standard output: require 'syscall.ph'; # run h2ph to generate this file sub cat($){ my $path = shift(); my $size = -s $path; my $memory = "\x00" x $size; # allocate some memory my $ptr = unpack( 'L', pack( 'P', $memory ) ); open( F, $path ) || die( "$path: cannot open ($!)\n" ); my $fd = fileno(F); my $res = syscall( &SYS_read, fileno(F), $ptr, $size ); print $memory; close( F ); } This is neither a specimen of simplicity nor a paragon of portability but it illustrates the point: We are able to sneak behind the scenes and access Perl's otherwise well-guarded memory! (Important note: Perl's C<syscall> does I<not> require you to construct pointers in this roundabout way. You simply pass a string variable, and Perl forwards the address.) How does C<unpack> with C<P> work? Imagine some pointer in the buffer about to be unpacked: If it isn't the null pointer (which will smartly produce the C<undef> value) we have a start address - but then what? Perl has no way of knowing how long this "fixed length string" is, so it's up to you to specify the actual size as an explicit length after C<P>. my $mem = "abcdefghijklmn"; print unpack( 'P5', pack( 'P', $mem ) ); # prints "abcde" As a consequence, C<pack> ignores any number or C<*> after C<P>. Now that we have seen C<P> at work, we might as well give C<p> a whirl. Why do we need a second template code for packing pointers at all? The answer lies behind the simple fact that an C<unpack> with C<p> promises a null-terminated string starting at the address taken from the buffer, and that implies a length for the data item to be returned: my $buf = pack( 'p', "abc\x00efhijklmn" ); print unpack( 'p', $buf ); # prints "abc" Albeit this is apt to be confusing: As a consequence of the length being implied by the string's length, a number after pack code C<p> is a repeat count, not a length as after C<P>. Using C<pack(..., $x)> with C<P> or C<p> to get the address where C<$x> is actually stored must be used with circumspection. Perl's internal machinery considers the relation between a variable and that address as its very own private matter and doesn't really care that we have obtained a copy. Therefore: =over 4 =item * Do not use C<pack> with C<p> or C<P> to obtain the address of variable that's bound to go out of scope (and thereby freeing its memory) before you are done with using the memory at that address. =item * Be very careful with Perl operations that change the value of the variable. Appending something to the variable, for instance, might require reallocation of its storage, leaving you with a pointer into no-man's land. =item * Don't think that you can get the address of a Perl variable when it is stored as an integer or double number! C<pack('P', $x)> will force the variable's internal representation to string, just as if you had written something like C<$x .= ''>. =back It's safe, however, to P- or p-pack a string literal, because Perl simply allocates an anonymous variable. =head1 Pack Recipes Here are a collection of (possibly) useful canned recipes for C<pack> and C<unpack>: # Convert IP address for socket functions pack( "C4", split /\./, "123.4.5.6" ); # Count the bits in a chunk of memory (e.g. a select vector) unpack( '%32b*', $mask ); # Determine the endianness of your system $is_little_endian = unpack( 'c', pack( 's', 1 ) ); $is_big_endian = unpack( 'xc', pack( 's', 1 ) ); # Determine the number of bits in a native integer $bits = unpack( '%32I!', ~0 ); # Prepare argument for the nanosleep system call my $timespec = pack( 'L!L!', $secs, $nanosecs ); For a simple memory dump we unpack some bytes into just as many pairs of hex digits, and use C<map> to handle the traditional spacing - 16 bytes to a line: my $i; print map( ++$i % 16 ? "$_ " : "$_\n", unpack( 'H2' x length( $mem ), $mem ) ), length( $mem ) % 16 ? "\n" : ''; =head1 Funnies Section # Pulling digits out of nowhere... print unpack( 'C', pack( 'x' ) ), unpack( '%B*', pack( 'A' ) ), unpack( 'H', pack( 'A' ) ), unpack( 'A', unpack( 'C', pack( 'A' ) ) ), "\n"; # One for the road ;-) my $advice = pack( 'all u can in a van' ); =head1 Authors Simon Cozens and Wolfgang Laun. perlqnx.pod 0000644 00000015021 15125556335 0006752 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specially designed to be readable as is. =head1 NAME perlqnx - Perl version 5 on QNX =head1 DESCRIPTION As of perl5.7.2 all tests pass under: QNX 4.24G Watcom 10.6 with Beta/970211.wcc.update.tar.F socket3r.lib Nov21 1996. As of perl5.8.1 there is at least one test still failing. Some tests may complain under known circumstances. See below and hints/qnx.sh for more information. Under QNX 6.2.0 there are still a few tests which fail. See below and hints/qnx.sh for more information. =head2 Required Software for Compiling Perl on QNX4 As with many unix ports, this one depends on a few "standard" unix utilities which are not necessarily standard for QNX4. =over 4 =item /bin/sh This is used heavily by Configure and then by perl itself. QNX4's version is fine, but Configure will choke on the 16-bit version, so if you are running QNX 4.22, link /bin/sh to /bin32/ksh =item ar This is the standard unix library builder. We use wlib. With Watcom 10.6, when wlib is linked as "ar", it behaves like ar and all is fine. Under 9.5, a cover is required. One is included in ../qnx =item nm This is used (optionally) by configure to list the contents of libraries. I will generate a cover function on the fly in the UU directory. =item cpp Configure and perl need a way to invoke a C preprocessor. I have created a simple cover for cc which does the right thing. Without this, Configure will create its own wrapper which works, but it doesn't handle some of the command line arguments that perl will throw at it. =item make You really need GNU make to compile this. GNU make ships by default with QNX 4.23, but you can get it from quics for earlier versions. =back =head2 Outstanding Issues with Perl on QNX4 There is no support for dynamically linked libraries in QNX4. If you wish to compile with the Socket extension, you need to have the TCP/IP toolkit, and you need to make sure that -lsocket locates the correct copy of socket3r.lib. Beware that the Watcom compiler ships with a stub version of socket3r.lib which has very little functionality. Also beware the order in which wlink searches directories for libraries. You may have /usr/lib/socket3r.lib pointing to the correct library, but wlink may pick up /usr/watcom/10.6/usr/lib/socket3r.lib instead. Make sure they both point to the correct library, that is, /usr/tcptk/current/usr/lib/socket3r.lib. The following tests may report errors under QNX4: dist/Cwd/Cwd.t will complain if `pwd` and cwd don't give the same results. cwd calls `fullpath -t`, so if you cd `fullpath -t` before running the test, it will pass. lib/File/Find/taint.t will complain if '.' is in your PATH. The PATH test is triggered because cwd calls `fullpath -t`. ext/IO/lib/IO/t/io_sock.t: Subtests 14 and 22 are skipped due to the fact that the functionality to read back the non-blocking status of a socket is not implemented in QNX's TCP/IP. This has been reported to QNX and it may work with later versions of TCP/IP. t/io/tell.t: Subtest 27 is failing. We are still investigating. =head2 QNX auxiliary files The files in the "qnx" directory are: =over 4 =item qnx/ar A script that emulates the standard unix archive (aka library) utility. Under Watcom 10.6, ar is linked to wlib and provides the expected interface. With Watcom 9.5, a cover function is required. This one is fairly crude but has proved adequate for compiling perl. =item qnx/cpp A script that provides C preprocessing functionality. Configure can generate a similar cover, but it doesn't handle all the command-line options that perl throws at it. This might be reasonably placed in /usr/local/bin. =back =head2 Outstanding issues with perl under QNX6 The following tests are still failing for Perl 5.8.1 under QNX 6.2.0: op/sprintf.........................FAILED at test 91 lib/Benchmark......................FAILED at test 26 This is due to a bug in the C library's printf routine. printf("'%e'", 0. ) produces '0.000000e+0', but ANSI requires '0.000000e+00'. QNX has acknowledged the bug. =head2 Cross-compilation Perl supports cross-compiling to QNX NTO through the Native Development Kit (NDK) for the Blackberry 10. This means that you can cross-compile for both ARM and x86 versions of the platform. =head3 Setting up a cross-compilation environment You can download the NDK from L<http://developer.blackberry.com/native/downloads/>. See L<http://developer.blackberry.com/native/documentation/cascades/getting_started/setting_up.html> for instructions to set up your device prior to attempting anything else. Once you've installed the NDK and set up your device, all that's left to do is setting up the device and the cross-compilation environment. Blackberry provides a script, C<bbndk-env.sh> (occasionally named something like C<bbndk-env_10_1_0_4828.sh>) which can be used to do this. However, there's a bit of a snag that we have to work through: The script modifies PATH so that 'gcc' or 'ar' point to their cross-compilation equivalents, which screws over the build process. So instead you'll want to do something like this: $ orig_path=$PATH $ source $location_of_bbndk/bbndk-env*.sh $ export PATH="$orig_path:$PATH" Besides putting the cross-compiler and the rest of the toolchain in your PATH, this will also provide the QNX_TARGET variable, which we will pass to Configure through -Dsysroot. =head3 Preparing the target system It's quite possible that the target system doesn't have a readily available /tmp, so it's generall safer to do something like this: $ ssh $TARGETUSER@$TARGETHOST 'rm -rf perl; mkdir perl; mkdir perl/tmp' $ export TARGETDIR=`ssh $TARGETUSER@$TARGETHOST pwd`/perl $ export TARGETENV="export TMPDIR=$TARGETDIR/tmp; " Later on, we'll pass this to Configure through -Dtargetenv =head3 Calling Configure If you are targetting an ARM device -- which currently includes the vast majority of phones and tablets -- you'll want to pass -Dcc=arm-unknown-nto-qnx8.0.0eabi-gcc to Configure. Alternatively, if you are targetting an x86 device, or using the simulator provided with the NDK, you should specify -Dcc=ntox86-gcc instead. A sample Configure invocation looks something like this: ./Configure -des -Dusecrosscompile \ -Dsysroot=$QNX_TARGET \ -Dtargetdir=$TARGETDIR \ -Dtargetenv="$TARGETENV" \ -Dcc=ntox86-gcc \ -Dtarghost=... # Usual cross-compilation options =head1 AUTHOR Norton T. Allen (allen@huarp.harvard.edu) perl5100delta.pod 0000644 00000154355 15125556335 0007561 0 ustar 00 =encoding utf8 =head1 NAME perl5100delta - what is new for perl 5.10.0 =head1 DESCRIPTION This document describes the differences between the 5.8.8 release and the 5.10.0 release. Many of the bug fixes in 5.10.0 were already seen in the 5.8.X maintenance releases; they are not duplicated here and are documented in the set of man pages named perl58[1-8]?delta. =head1 Core Enhancements =head2 The C<feature> pragma The C<feature> pragma is used to enable new syntax that would break Perl's backwards-compatibility with older releases of the language. It's a lexical pragma, like C<strict> or C<warnings>. Currently the following new features are available: C<switch> (adds a switch statement), C<say> (adds a C<say> built-in function), and C<state> (adds a C<state> keyword for declaring "static" variables). Those features are described in their own sections of this document. The C<feature> pragma is also implicitly loaded when you require a minimal perl version (with the C<use VERSION> construct) greater than, or equal to, 5.9.5. See L<feature> for details. =head2 New B<-E> command-line switch B<-E> is equivalent to B<-e>, but it implicitly enables all optional features (like C<use feature ":5.10">). =head2 Defined-or operator A new operator C<//> (defined-or) has been implemented. The following expression: $a // $b is merely equivalent to defined $a ? $a : $b and the statement $c //= $d; can now be used instead of $c = $d unless defined $c; The C<//> operator has the same precedence and associativity as C<||>. Special care has been taken to ensure that this operator Do What You Mean while not breaking old code, but some edge cases involving the empty regular expression may now parse differently. See L<perlop> for details. =head2 Switch and Smart Match operator Perl 5 now has a switch statement. It's available when C<use feature 'switch'> is in effect. This feature introduces three new keywords, C<given>, C<when>, and C<default>: given ($foo) { when (/^abc/) { $abc = 1; } when (/^def/) { $def = 1; } when (/^xyz/) { $xyz = 1; } default { $nothing = 1; } } A more complete description of how Perl matches the switch variable against the C<when> conditions is given in L<perlsyn/"Switch statements">. This kind of match is called I<smart match>, and it's also possible to use it outside of switch statements, via the new C<~~> operator. See L<perlsyn/"Smart matching in detail">. This feature was contributed by Robin Houston. =head2 Regular expressions =over 4 =item Recursive Patterns It is now possible to write recursive patterns without using the C<(??{})> construct. This new way is more efficient, and in many cases easier to read. Each capturing parenthesis can now be treated as an independent pattern that can be entered by using the C<(?PARNO)> syntax (C<PARNO> standing for "parenthesis number"). For example, the following pattern will match nested balanced angle brackets: / ^ # start of line ( # start capture buffer 1 < # match an opening angle bracket (?: # match one of: (?> # don't backtrack over the inside of this group [^<>]+ # one or more non angle brackets ) # end non backtracking group | # ... or ... (?1) # recurse to bracket 1 and try it again )* # 0 or more times. > # match a closing angle bracket ) # end capture buffer one $ # end of line /x PCRE users should note that Perl's recursive regex feature allows backtracking into a recursed pattern, whereas in PCRE the recursion is atomic or "possessive" in nature. As in the example above, you can add (?>) to control this selectively. (Yves Orton) =item Named Capture Buffers It is now possible to name capturing parenthesis in a pattern and refer to the captured contents by name. The naming syntax is C<< (?<NAME>....) >>. It's possible to backreference to a named buffer with the C<< \k<NAME> >> syntax. In code, the new magical hashes C<%+> and C<%-> can be used to access the contents of the capture buffers. Thus, to replace all doubled chars with a single copy, one could write s/(?<letter>.)\k<letter>/$+{letter}/g Only buffers with defined contents will be "visible" in the C<%+> hash, so it's possible to do something like foreach my $name (keys %+) { print "content of buffer '$name' is $+{$name}\n"; } The C<%-> hash is a bit more complete, since it will contain array refs holding values from all capture buffers similarly named, if there should be many of them. C<%+> and C<%-> are implemented as tied hashes through the new module C<Tie::Hash::NamedCapture>. Users exposed to the .NET regex engine will find that the perl implementation differs in that the numerical ordering of the buffers is sequential, and not "unnamed first, then named". Thus in the pattern /(A)(?<B>B)(C)(?<D>D)/ $1 will be 'A', $2 will be 'B', $3 will be 'C' and $4 will be 'D' and not $1 is 'A', $2 is 'C' and $3 is 'B' and $4 is 'D' that a .NET programmer would expect. This is considered a feature. :-) (Yves Orton) =item Possessive Quantifiers Perl now supports the "possessive quantifier" syntax of the "atomic match" pattern. Basically a possessive quantifier matches as much as it can and never gives any back. Thus it can be used to control backtracking. The syntax is similar to non-greedy matching, except instead of using a '?' as the modifier the '+' is used. Thus C<?+>, C<*+>, C<++>, C<{min,max}+> are now legal quantifiers. (Yves Orton) =item Backtracking control verbs The regex engine now supports a number of special-purpose backtrack control verbs: (*THEN), (*PRUNE), (*MARK), (*SKIP), (*COMMIT), (*FAIL) and (*ACCEPT). See L<perlre> for their descriptions. (Yves Orton) =item Relative backreferences A new syntax C<\g{N}> or C<\gN> where "N" is a decimal integer allows a safer form of back-reference notation as well as allowing relative backreferences. This should make it easier to generate and embed patterns that contain backreferences. See L<perlre/"Capture buffers">. (Yves Orton) =item C<\K> escape The functionality of Jeff Pinyan's module Regexp::Keep has been added to the core. In regular expressions you can now use the special escape C<\K> as a way to do something like floating length positive lookbehind. It is also useful in substitutions like: s/(foo)bar/$1/g that can now be converted to s/foo\Kbar//g which is much more efficient. (Yves Orton) =item Vertical and horizontal whitespace, and linebreak Regular expressions now recognize the C<\v> and C<\h> escapes that match vertical and horizontal whitespace, respectively. C<\V> and C<\H> logically match their complements. C<\R> matches a generic linebreak, that is, vertical whitespace, plus the multi-character sequence C<"\x0D\x0A">. =item Optional pre-match and post-match captures with the /p flag There is a new flag C</p> for regular expressions. Using this makes the engine preserve a copy of the part of the matched string before the matching substring to the new special variable C<${^PREMATCH}>, the part after the matching substring to C<${^POSTMATCH}>, and the matched substring itself to C<${^MATCH}>. Perl is still able to store these substrings to the special variables C<$`>, C<$'>, C<$&>, but using these variables anywhere in the program adds a penalty to all regular expression matches, whereas if you use the C</p> flag and the new special variables instead, you pay only for the regular expressions where the flag is used. For more detail on the new variables, see L<perlvar>; for the use of the regular expression flag, see L<perlop> and L<perlre>. =back =head2 C<say()> say() is a new built-in, only available when C<use feature 'say'> is in effect, that is similar to print(), but that implicitly appends a newline to the printed string. See L<perlfunc/say>. (Robin Houston) =head2 Lexical C<$_> The default variable C<$_> can now be lexicalized, by declaring it like any other lexical variable, with a simple my $_; The operations that default on C<$_> will use the lexically-scoped version of C<$_> when it exists, instead of the global C<$_>. In a C<map> or a C<grep> block, if C<$_> was previously my'ed, then the C<$_> inside the block is lexical as well (and scoped to the block). In a scope where C<$_> has been lexicalized, you can still have access to the global version of C<$_> by using C<$::_>, or, more simply, by overriding the lexical declaration with C<our $_>. (Rafael Garcia-Suarez) =head2 The C<_> prototype A new prototype character has been added. C<_> is equivalent to C<$> but defaults to C<$_> if the corresponding argument isn't supplied (both C<$> and C<_> denote a scalar). Due to the optional nature of the argument, you can only use it at the end of a prototype, or before a semicolon. This has a small incompatible consequence: the prototype() function has been adjusted to return C<_> for some built-ins in appropriate cases (for example, C<prototype('CORE::rmdir')>). (Rafael Garcia-Suarez) =head2 UNITCHECK blocks C<UNITCHECK>, a new special code block has been introduced, in addition to C<BEGIN>, C<CHECK>, C<INIT> and C<END>. C<CHECK> and C<INIT> blocks, while useful for some specialized purposes, are always executed at the transition between the compilation and the execution of the main program, and thus are useless whenever code is loaded at runtime. On the other hand, C<UNITCHECK> blocks are executed just after the unit which defined them has been compiled. See L<perlmod> for more information. (Alex Gough) =head2 New Pragma, C<mro> A new pragma, C<mro> (for Method Resolution Order) has been added. It permits to switch, on a per-class basis, the algorithm that perl uses to find inherited methods in case of a multiple inheritance hierarchy. The default MRO hasn't changed (DFS, for Depth First Search). Another MRO is available: the C3 algorithm. See L<mro> for more information. (Brandon Black) Note that, due to changes in the implementation of class hierarchy search, code that used to undef the C<*ISA> glob will most probably break. Anyway, undef'ing C<*ISA> had the side-effect of removing the magic on the @ISA array and should not have been done in the first place. Also, the cache C<*::ISA::CACHE::> no longer exists; to force reset the @ISA cache, you now need to use the C<mro> API, or more simply to assign to @ISA (e.g. with C<@ISA = @ISA>). =head2 readdir() may return a "short filename" on Windows The readdir() function may return a "short filename" when the long filename contains characters outside the ANSI codepage. Similarly Cwd::cwd() may return a short directory name, and glob() may return short names as well. On the NTFS file system these short names can always be represented in the ANSI codepage. This will not be true for all other file system drivers; e.g. the FAT filesystem stores short filenames in the OEM codepage, so some files on FAT volumes remain unaccessible through the ANSI APIs. Similarly, $^X, @INC, and $ENV{PATH} are preprocessed at startup to make sure all paths are valid in the ANSI codepage (if possible). The Win32::GetLongPathName() function now returns the UTF-8 encoded correct long file name instead of using replacement characters to force the name into the ANSI codepage. The new Win32::GetANSIPathName() function can be used to turn a long pathname into a short one only if the long one cannot be represented in the ANSI codepage. Many other functions in the C<Win32> module have been improved to accept UTF-8 encoded arguments. Please see L<Win32> for details. =head2 readpipe() is now overridable The built-in function readpipe() is now overridable. Overriding it permits also to override its operator counterpart, C<qx//> (a.k.a. C<``>). Moreover, it now defaults to C<$_> if no argument is provided. (Rafael Garcia-Suarez) =head2 Default argument for readline() readline() now defaults to C<*ARGV> if no argument is provided. (Rafael Garcia-Suarez) =head2 state() variables A new class of variables has been introduced. State variables are similar to C<my> variables, but are declared with the C<state> keyword in place of C<my>. They're visible only in their lexical scope, but their value is persistent: unlike C<my> variables, they're not undefined at scope entry, but retain their previous value. (Rafael Garcia-Suarez, Nicholas Clark) To use state variables, one needs to enable them by using use feature 'state'; or by using the C<-E> command-line switch in one-liners. See L<perlsub/"Persistent Private Variables">. =head2 Stacked filetest operators As a new form of syntactic sugar, it's now possible to stack up filetest operators. You can now write C<-f -w -x $file> in a row to mean C<-x $file && -w _ && -f _>. See L<perlfunc/-X>. =head2 UNIVERSAL::DOES() The C<UNIVERSAL> class has a new method, C<DOES()>. It has been added to solve semantic problems with the C<isa()> method. C<isa()> checks for inheritance, while C<DOES()> has been designed to be overridden when module authors use other types of relations between classes (in addition to inheritance). (chromatic) See L<< UNIVERSAL/"$obj->DOES( ROLE )" >>. =head2 Formats Formats were improved in several ways. A new field, C<^*>, can be used for variable-width, one-line-at-a-time text. Null characters are now handled correctly in picture lines. Using C<@#> and C<~~> together will now produce a compile-time error, as those format fields are incompatible. L<perlform> has been improved, and miscellaneous bugs fixed. =head2 Byte-order modifiers for pack() and unpack() There are two new byte-order modifiers, C<E<gt>> (big-endian) and C<E<lt>> (little-endian), that can be appended to most pack() and unpack() template characters and groups to force a certain byte-order for that type or group. See L<perlfunc/pack> and L<perlpacktut> for details. =head2 C<no VERSION> You can now use C<no> followed by a version number to specify that you want to use a version of perl older than the specified one. =head2 C<chdir>, C<chmod> and C<chown> on filehandles C<chdir>, C<chmod> and C<chown> can now work on filehandles as well as filenames, if the system supports respectively C<fchdir>, C<fchmod> and C<fchown>, thanks to a patch provided by Gisle Aas. =head2 OS groups C<$(> and C<$)> now return groups in the order where the OS returns them, thanks to Gisle Aas. This wasn't previously the case. =head2 Recursive sort subs You can now use recursive subroutines with sort(), thanks to Robin Houston. =head2 Exceptions in constant folding The constant folding routine is now wrapped in an exception handler, and if folding throws an exception (such as attempting to evaluate 0/0), perl now retains the current optree, rather than aborting the whole program. Without this change, programs would not compile if they had expressions that happened to generate exceptions, even though those expressions were in code that could never be reached at runtime. (Nicholas Clark, Dave Mitchell) =head2 Source filters in @INC It's possible to enhance the mechanism of subroutine hooks in @INC by adding a source filter on top of the filehandle opened and returned by the hook. This feature was planned a long time ago, but wasn't quite working until now. See L<perlfunc/require> for details. (Nicholas Clark) =head2 New internal variables =over 4 =item C<${^RE_DEBUG_FLAGS}> This variable controls what debug flags are in effect for the regular expression engine when running under C<use re "debug">. See L<re> for details. =item C<${^CHILD_ERROR_NATIVE}> This variable gives the native status returned by the last pipe close, backtick command, successful call to wait() or waitpid(), or from the system() operator. See L<perlvar> for details. (Contributed by Gisle Aas.) =item C<${^RE_TRIE_MAXBUF}> See L</"Trie optimisation of literal string alternations">. =item C<${^WIN32_SLOPPY_STAT}> See L</"Sloppy stat on Windows">. =back =head2 Miscellaneous C<unpack()> now defaults to unpacking the C<$_> variable. C<mkdir()> without arguments now defaults to C<$_>. The internal dump output has been improved, so that non-printable characters such as newline and backspace are output in C<\x> notation, rather than octal. The B<-C> option can no longer be used on the C<#!> line. It wasn't working there anyway, since the standard streams are already set up at this point in the execution of the perl interpreter. You can use binmode() instead to get the desired behaviour. =head2 UCD 5.0.0 The copy of the Unicode Character Database included in Perl 5 has been updated to version 5.0.0. =head2 MAD MAD, which stands for I<Miscellaneous Attribute Decoration>, is a still-in-development work leading to a Perl 5 to Perl 6 converter. To enable it, it's necessary to pass the argument C<-Dmad> to Configure. The obtained perl isn't binary compatible with a regular perl 5.10, and has space and speed penalties; moreover not all regression tests still pass with it. (Larry Wall, Nicholas Clark) =head2 kill() on Windows On Windows platforms, C<kill(-9, $pid)> now kills a process tree. (On Unix, this delivers the signal to all processes in the same process group.) =head1 Incompatible Changes =head2 Packing and UTF-8 strings The semantics of pack() and unpack() regarding UTF-8-encoded data has been changed. Processing is now by default character per character instead of byte per byte on the underlying encoding. Notably, code that used things like C<pack("a*", $string)> to see through the encoding of string will now simply get back the original $string. Packed strings can also get upgraded during processing when you store upgraded characters. You can get the old behaviour by using C<use bytes>. To be consistent with pack(), the C<C0> in unpack() templates indicates that the data is to be processed in character mode, i.e. character by character; on the contrary, C<U0> in unpack() indicates UTF-8 mode, where the packed string is processed in its UTF-8-encoded Unicode form on a byte by byte basis. This is reversed with regard to perl 5.8.X, but now consistent between pack() and unpack(). Moreover, C<C0> and C<U0> can also be used in pack() templates to specify respectively character and byte modes. C<C0> and C<U0> in the middle of a pack or unpack format now switch to the specified encoding mode, honoring parens grouping. Previously, parens were ignored. Also, there is a new pack() character format, C<W>, which is intended to replace the old C<C>. C<C> is kept for unsigned chars coded as bytes in the strings internal representation. C<W> represents unsigned (logical) character values, which can be greater than 255. It is therefore more robust when dealing with potentially UTF-8-encoded data (as C<C> will wrap values outside the range 0..255, and not respect the string encoding). In practice, that means that pack formats are now encoding-neutral, except C<C>. For consistency, C<A> in unpack() format now trims all Unicode whitespace from the end of the string. Before perl 5.9.2, it used to strip only the classical ASCII space characters. =head2 Byte/character count feature in unpack() A new unpack() template character, C<".">, returns the number of bytes or characters (depending on the selected encoding mode, see above) read so far. =head2 The C<$*> and C<$#> variables have been removed C<$*>, which was deprecated in favor of the C</s> and C</m> regexp modifiers, has been removed. The deprecated C<$#> variable (output format for numbers) has been removed. Two new severe warnings, C<$#/$* is no longer supported>, have been added. =head2 substr() lvalues are no longer fixed-length The lvalues returned by the three argument form of substr() used to be a "fixed length window" on the original string. In some cases this could cause surprising action at distance or other undefined behaviour. Now the length of the window adjusts itself to the length of the string assigned to it. =head2 Parsing of C<-f _> The identifier C<_> is now forced to be a bareword after a filetest operator. This solves a number of misparsing issues when a global C<_> subroutine is defined. =head2 C<:unique> The C<:unique> attribute has been made a no-op, since its current implementation was fundamentally flawed and not threadsafe. =head2 Effect of pragmas in eval The compile-time value of the C<%^H> hint variable can now propagate into eval("")uated code. This makes it more useful to implement lexical pragmas. As a side-effect of this, the overloaded-ness of constants now propagates into eval(""). =head2 chdir FOO A bareword argument to chdir() is now recognized as a file handle. Earlier releases interpreted the bareword as a directory name. (Gisle Aas) =head2 Handling of .pmc files An old feature of perl was that before C<require> or C<use> look for a file with a F<.pm> extension, they will first look for a similar filename with a F<.pmc> extension. If this file is found, it will be loaded in place of any potentially existing file ending in a F<.pm> extension. Previously, F<.pmc> files were loaded only if more recent than the matching F<.pm> file. Starting with 5.9.4, they'll be always loaded if they exist. =head2 $^V is now a C<version> object instead of a v-string $^V can still be used with the C<%vd> format in printf, but any character-level operations will now access the string representation of the C<version> object and not the ordinals of a v-string. Expressions like C<< substr($^V, 0, 2) >> or C<< split //, $^V >> no longer work and must be rewritten. =head2 @- and @+ in patterns The special arrays C<@-> and C<@+> are no longer interpolated in regular expressions. (Sadahiro Tomoyuki) =head2 $AUTOLOAD can now be tainted If you call a subroutine by a tainted name, and if it defers to an AUTOLOAD function, then $AUTOLOAD will be (correctly) tainted. (Rick Delaney) =head2 Tainting and printf When perl is run under taint mode, C<printf()> and C<sprintf()> will now reject any tainted format argument. (Rafael Garcia-Suarez) =head2 undef and signal handlers Undefining or deleting a signal handler via C<undef $SIG{FOO}> is now equivalent to setting it to C<'DEFAULT'>. (Rafael Garcia-Suarez) =head2 strictures and dereferencing in defined() C<use strict 'refs'> was ignoring taking a hard reference in an argument to defined(), as in : use strict 'refs'; my $x = 'foo'; if (defined $$x) {...} This now correctly produces the run-time error C<Can't use string as a SCALAR ref while "strict refs" in use>. C<defined @$foo> and C<defined %$bar> are now also subject to C<strict 'refs'> (that is, C<$foo> and C<$bar> shall be proper references there.) (C<defined(@foo)> and C<defined(%bar)> are discouraged constructs anyway.) (Nicholas Clark) =head2 C<(?p{})> has been removed The regular expression construct C<(?p{})>, which was deprecated in perl 5.8, has been removed. Use C<(??{})> instead. (Rafael Garcia-Suarez) =head2 Pseudo-hashes have been removed Support for pseudo-hashes has been removed from Perl 5.9. (The C<fields> pragma remains here, but uses an alternate implementation.) =head2 Removal of the bytecode compiler and of perlcc C<perlcc>, the byteloader and the supporting modules (B::C, B::CC, B::Bytecode, etc.) are no longer distributed with the perl sources. Those experimental tools have never worked reliably, and, due to the lack of volunteers to keep them in line with the perl interpreter developments, it was decided to remove them instead of shipping a broken version of those. The last version of those modules can be found with perl 5.9.4. However the B compiler framework stays supported in the perl core, as with the more useful modules it has permitted (among others, B::Deparse and B::Concise). =head2 Removal of the JPL The JPL (Java-Perl Lingo) has been removed from the perl sources tarball. =head2 Recursive inheritance detected earlier Perl will now immediately throw an exception if you modify any package's C<@ISA> in such a way that it would cause recursive inheritance. Previously, the exception would not occur until Perl attempted to make use of the recursive inheritance while resolving a method or doing a C<$foo-E<gt>isa($bar)> lookup. =head2 warnings::enabled and warnings::warnif changed to favor users of modules The behaviour in 5.10.x favors the person using the module; The behaviour in 5.8.x favors the module writer; Assume the following code: main calls Foo::Bar::baz() Foo::Bar inherits from Foo::Base Foo::Bar::baz() calls Foo::Base::_bazbaz() Foo::Base::_bazbaz() calls: warnings::warnif('substr', 'some warning message'); On 5.8.x, the code warns when Foo::Bar contains C<use warnings;> It does not matter if Foo::Base or main have warnings enabled to disable the warning one has to modify Foo::Bar. On 5.10.0 and newer, the code warns when main contains C<use warnings;> It does not matter if Foo::Base or Foo::Bar have warnings enabled to disable the warning one has to modify main. =head1 Modules and Pragmata =head2 Upgrading individual core modules Even more core modules are now also available separately through the CPAN. If you wish to update one of these modules, you don't need to wait for a new perl release. From within the cpan shell, running the 'r' command will report on modules with upgrades available. See C<perldoc CPAN> for more information. =head2 Pragmata Changes =over 4 =item C<feature> The new pragma C<feature> is used to enable new features that might break old code. See L</"The C<feature> pragma"> above. =item C<mro> This new pragma enables to change the algorithm used to resolve inherited methods. See L</"New Pragma, C<mro>"> above. =item Scoping of the C<sort> pragma The C<sort> pragma is now lexically scoped. Its effect used to be global. =item Scoping of C<bignum>, C<bigint>, C<bigrat> The three numeric pragmas C<bignum>, C<bigint> and C<bigrat> are now lexically scoped. (Tels) =item C<base> The C<base> pragma now warns if a class tries to inherit from itself. (Curtis "Ovid" Poe) =item C<strict> and C<warnings> C<strict> and C<warnings> will now complain loudly if they are loaded via incorrect casing (as in C<use Strict;>). (Johan Vromans) =item C<version> The C<version> module provides support for version objects. =item C<warnings> The C<warnings> pragma doesn't load C<Carp> anymore. That means that code that used C<Carp> routines without having loaded it at compile time might need to be adjusted; typically, the following (faulty) code won't work anymore, and will require parentheses to be added after the function name: use warnings; require Carp; Carp::confess 'argh'; =item C<less> C<less> now does something useful (or at least it tries to). In fact, it has been turned into a lexical pragma. So, in your modules, you can now test whether your users have requested to use less CPU, or less memory, less magic, or maybe even less fat. See L<less> for more. (Joshua ben Jore) =back =head2 New modules =over 4 =item * C<encoding::warnings>, by Audrey Tang, is a module to emit warnings whenever an ASCII character string containing high-bit bytes is implicitly converted into UTF-8. It's a lexical pragma since Perl 5.9.4; on older perls, its effect is global. =item * C<Module::CoreList>, by Richard Clamp, is a small handy module that tells you what versions of core modules ship with any versions of Perl 5. It comes with a command-line frontend, C<corelist>. =item * C<Math::BigInt::FastCalc> is an XS-enabled, and thus faster, version of C<Math::BigInt::Calc>. =item * C<Compress::Zlib> is an interface to the zlib compression library. It comes with a bundled version of zlib, so having a working zlib is not a prerequisite to install it. It's used by C<Archive::Tar> (see below). =item * C<IO::Zlib> is an C<IO::>-style interface to C<Compress::Zlib>. =item * C<Archive::Tar> is a module to manipulate C<tar> archives. =item * C<Digest::SHA> is a module used to calculate many types of SHA digests, has been included for SHA support in the CPAN module. =item * C<ExtUtils::CBuilder> and C<ExtUtils::ParseXS> have been added. =item * C<Hash::Util::FieldHash>, by Anno Siegel, has been added. This module provides support for I<field hashes>: hashes that maintain an association of a reference with a value, in a thread-safe garbage-collected way. Such hashes are useful to implement inside-out objects. =item * C<Module::Build>, by Ken Williams, has been added. It's an alternative to C<ExtUtils::MakeMaker> to build and install perl modules. =item * C<Module::Load>, by Jos Boumans, has been added. It provides a single interface to load Perl modules and F<.pl> files. =item * C<Module::Loaded>, by Jos Boumans, has been added. It's used to mark modules as loaded or unloaded. =item * C<Package::Constants>, by Jos Boumans, has been added. It's a simple helper to list all constants declared in a given package. =item * C<Win32API::File>, by Tye McQueen, has been added (for Windows builds). This module provides low-level access to Win32 system API calls for files/dirs. =item * C<Locale::Maketext::Simple>, needed by CPANPLUS, is a simple wrapper around C<Locale::Maketext::Lexicon>. Note that C<Locale::Maketext::Lexicon> isn't included in the perl core; the behaviour of C<Locale::Maketext::Simple> gracefully degrades when the later isn't present. =item * C<Params::Check> implements a generic input parsing/checking mechanism. It is used by CPANPLUS. =item * C<Term::UI> simplifies the task to ask questions at a terminal prompt. =item * C<Object::Accessor> provides an interface to create per-object accessors. =item * C<Module::Pluggable> is a simple framework to create modules that accept pluggable sub-modules. =item * C<Module::Load::Conditional> provides simple ways to query and possibly load installed modules. =item * C<Time::Piece> provides an object oriented interface to time functions, overriding the built-ins localtime() and gmtime(). =item * C<IPC::Cmd> helps to find and run external commands, possibly interactively. =item * C<File::Fetch> provide a simple generic file fetching mechanism. =item * C<Log::Message> and C<Log::Message::Simple> are used by the log facility of C<CPANPLUS>. =item * C<Archive::Extract> is a generic archive extraction mechanism for F<.tar> (plain, gzipped or bzipped) or F<.zip> files. =item * C<CPANPLUS> provides an API and a command-line tool to access the CPAN mirrors. =item * C<Pod::Escapes> provides utilities that are useful in decoding Pod EE<lt>...E<gt> sequences. =item * C<Pod::Simple> is now the backend for several of the Pod-related modules included with Perl. =back =head2 Selected Changes to Core Modules =over 4 =item C<Attribute::Handlers> C<Attribute::Handlers> can now report the caller's file and line number. (David Feldman) All interpreted attributes are now passed as array references. (Damian Conway) =item C<B::Lint> C<B::Lint> is now based on C<Module::Pluggable>, and so can be extended with plugins. (Joshua ben Jore) =item C<B> It's now possible to access the lexical pragma hints (C<%^H>) by using the method B::COP::hints_hash(). It returns a C<B::RHE> object, which in turn can be used to get a hash reference via the method B::RHE::HASH(). (Joshua ben Jore) =item C<Thread> As the old 5005thread threading model has been removed, in favor of the ithreads scheme, the C<Thread> module is now a compatibility wrapper, to be used in old code only. It has been removed from the default list of dynamic extensions. =back =head1 Utility Changes =over 4 =item perl -d The Perl debugger can now save all debugger commands for sourcing later; notably, it can now emulate stepping backwards, by restarting and rerunning all bar the last command from a saved command history. It can also display the parent inheritance tree of a given class, with the C<i> command. =item ptar C<ptar> is a pure perl implementation of C<tar> that comes with C<Archive::Tar>. =item ptardiff C<ptardiff> is a small utility used to generate a diff between the contents of a tar archive and a directory tree. Like C<ptar>, it comes with C<Archive::Tar>. =item shasum C<shasum> is a command-line utility, used to print or to check SHA digests. It comes with the new C<Digest::SHA> module. =item corelist The C<corelist> utility is now installed with perl (see L</"New modules"> above). =item h2ph and h2xs C<h2ph> and C<h2xs> have been made more robust with regard to "modern" C code. C<h2xs> implements a new option C<--use-xsloader> to force use of C<XSLoader> even in backwards compatible modules. The handling of authors' names that had apostrophes has been fixed. Any enums with negative values are now skipped. =item perlivp C<perlivp> no longer checks for F<*.ph> files by default. Use the new C<-a> option to run I<all> tests. =item find2perl C<find2perl> now assumes C<-print> as a default action. Previously, it needed to be specified explicitly. Several bugs have been fixed in C<find2perl>, regarding C<-exec> and C<-eval>. Also the options C<-path>, C<-ipath> and C<-iname> have been added. =item config_data C<config_data> is a new utility that comes with C<Module::Build>. It provides a command-line interface to the configuration of Perl modules that use Module::Build's framework of configurability (that is, C<*::ConfigData> modules that contain local configuration information for their parent modules.) =item cpanp C<cpanp>, the CPANPLUS shell, has been added. (C<cpanp-run-perl>, a helper for CPANPLUS operation, has been added too, but isn't intended for direct use). =item cpan2dist C<cpan2dist> is a new utility that comes with CPANPLUS. It's a tool to create distributions (or packages) from CPAN modules. =item pod2html The output of C<pod2html> has been enhanced to be more customizable via CSS. Some formatting problems were also corrected. (Jari Aalto) =back =head1 New Documentation The L<perlpragma> manpage documents how to write one's own lexical pragmas in pure Perl (something that is possible starting with 5.9.4). The new L<perlglossary> manpage is a glossary of terms used in the Perl documentation, technical and otherwise, kindly provided by O'Reilly Media, Inc. The L<perlreguts> manpage, courtesy of Yves Orton, describes internals of the Perl regular expression engine. The L<perlreapi> manpage describes the interface to the perl interpreter used to write pluggable regular expression engines (by Ævar Arnfjörð Bjarmason). The L<perlunitut> manpage is a tutorial for programming with Unicode and string encodings in Perl, courtesy of Juerd Waalboer. A new manual page, L<perlunifaq> (the Perl Unicode FAQ), has been added (Juerd Waalboer). The L<perlcommunity> manpage gives a description of the Perl community on the Internet and in real life. (Edgar "Trizor" Bering) The L<CORE> manual page documents the C<CORE::> namespace. (Tels) The long-existing feature of C</(?{...})/> regexps setting C<$_> and pos() is now documented. =head1 Performance Enhancements =head2 In-place sorting Sorting arrays in place (C<@a = sort @a>) is now optimized to avoid making a temporary copy of the array. Likewise, C<reverse sort ...> is now optimized to sort in reverse, avoiding the generation of a temporary intermediate list. =head2 Lexical array access Access to elements of lexical arrays via a numeric constant between 0 and 255 is now faster. (This used to be only the case for global arrays.) =head2 XS-assisted SWASHGET Some pure-perl code that perl was using to retrieve Unicode properties and transliteration mappings has been reimplemented in XS. =head2 Constant subroutines The interpreter internals now support a far more memory efficient form of inlineable constants. Storing a reference to a constant value in a symbol table is equivalent to a full typeglob referencing a constant subroutine, but using about 400 bytes less memory. This proxy constant subroutine is automatically upgraded to a real typeglob with subroutine if necessary. The approach taken is analogous to the existing space optimisation for subroutine stub declarations, which are stored as plain scalars in place of the full typeglob. Several of the core modules have been converted to use this feature for their system dependent constants - as a result C<use POSIX;> now takes about 200K less memory. =head2 C<PERL_DONT_CREATE_GVSV> The new compilation flag C<PERL_DONT_CREATE_GVSV>, introduced as an option in perl 5.8.8, is turned on by default in perl 5.9.3. It prevents perl from creating an empty scalar with every new typeglob. See L<perl589delta> for details. =head2 Weak references are cheaper Weak reference creation is now I<O(1)> rather than I<O(n)>, courtesy of Nicholas Clark. Weak reference deletion remains I<O(n)>, but if deletion only happens at program exit, it may be skipped completely. =head2 sort() enhancements Salvador Fandiño provided improvements to reduce the memory usage of C<sort> and to speed up some cases. =head2 Memory optimisations Several internal data structures (typeglobs, GVs, CVs, formats) have been restructured to use less memory. (Nicholas Clark) =head2 UTF-8 cache optimisation The UTF-8 caching code is now more efficient, and used more often. (Nicholas Clark) =head2 Sloppy stat on Windows On Windows, perl's stat() function normally opens the file to determine the link count and update attributes that may have been changed through hard links. Setting ${^WIN32_SLOPPY_STAT} to a true value speeds up stat() by not performing this operation. (Jan Dubois) =head2 Regular expressions optimisations =over 4 =item Engine de-recursivised The regular expression engine is no longer recursive, meaning that patterns that used to overflow the stack will either die with useful explanations, or run to completion, which, since they were able to blow the stack before, will likely take a very long time to happen. If you were experiencing the occasional stack overflow (or segfault) and upgrade to discover that now perl apparently hangs instead, look for a degenerate regex. (Dave Mitchell) =item Single char char-classes treated as literals Classes of a single character are now treated the same as if the character had been used as a literal, meaning that code that uses char-classes as an escaping mechanism will see a speedup. (Yves Orton) =item Trie optimisation of literal string alternations Alternations, where possible, are optimised into more efficient matching structures. String literal alternations are merged into a trie and are matched simultaneously. This means that instead of O(N) time for matching N alternations at a given point, the new code performs in O(1) time. A new special variable, ${^RE_TRIE_MAXBUF}, has been added to fine-tune this optimization. (Yves Orton) B<Note:> Much code exists that works around perl's historic poor performance on alternations. Often the tricks used to do so will disable the new optimisations. Hopefully the utility modules used for this purpose will be educated about these new optimisations. =item Aho-Corasick start-point optimisation When a pattern starts with a trie-able alternation and there aren't better optimisations available, the regex engine will use Aho-Corasick matching to find the start point. (Yves Orton) =back =head1 Installation and Configuration Improvements =head2 Configuration improvements =over 4 =item C<-Dusesitecustomize> Run-time customization of @INC can be enabled by passing the C<-Dusesitecustomize> flag to Configure. When enabled, this will make perl run F<$sitelibexp/sitecustomize.pl> before anything else. This script can then be set up to add additional entries to @INC. =item Relocatable installations There is now Configure support for creating a relocatable perl tree. If you Configure with C<-Duserelocatableinc>, then the paths in @INC (and everything else in %Config) can be optionally located via the path of the perl executable. That means that, if the string C<".../"> is found at the start of any path, it's substituted with the directory of $^X. So, the relocation can be configured on a per-directory basis, although the default with C<-Duserelocatableinc> is that everything is relocated. The initial install is done to the original configured prefix. =item strlcat() and strlcpy() The configuration process now detects whether strlcat() and strlcpy() are available. When they are not available, perl's own version is used (from Russ Allbery's public domain implementation). Various places in the perl interpreter now use them. (Steve Peters) =item C<d_pseudofork> and C<d_printf_format_null> A new configuration variable, available as C<$Config{d_pseudofork}> in the L<Config> module, has been added, to distinguish real fork() support from fake pseudofork used on Windows platforms. A new configuration variable, C<d_printf_format_null>, has been added, to see if printf-like formats are allowed to be NULL. =item Configure help C<Configure -h> has been extended with the most commonly used options. =back =head2 Compilation improvements =over 4 =item Parallel build Parallel makes should work properly now, although there may still be problems if C<make test> is instructed to run in parallel. =item Borland's compilers support Building with Borland's compilers on Win32 should work more smoothly. In particular Steve Hay has worked to side step many warnings emitted by their compilers and at least one C compiler internal error. =item Static build on Windows Perl extensions on Windows now can be statically built into the Perl DLL. Also, it's now possible to build a C<perl-static.exe> that doesn't depend on the Perl DLL on Win32. See the Win32 makefiles for details. (Vadim Konovalov) =item ppport.h files All F<ppport.h> files in the XS modules bundled with perl are now autogenerated at build time. (Marcus Holland-Moritz) =item C++ compatibility Efforts have been made to make perl and the core XS modules compilable with various C++ compilers (although the situation is not perfect with some of the compilers on some of the platforms tested.) =item Support for Microsoft 64-bit compiler Support for building perl with Microsoft's 64-bit compiler has been improved. (ActiveState) =item Visual C++ Perl can now be compiled with Microsoft Visual C++ 2005 (and 2008 Beta 2). =item Win32 builds All win32 builds (MS-Win, WinCE) have been merged and cleaned up. =back =head2 Installation improvements =over 4 =item Module auxiliary files README files and changelogs for CPAN modules bundled with perl are no longer installed. =back =head2 New Or Improved Platforms Perl has been reported to work on Symbian OS. See L<perlsymbian> for more information. Many improvements have been made towards making Perl work correctly on z/OS. Perl has been reported to work on DragonFlyBSD and MidnightBSD. Perl has also been reported to work on NexentaOS ( http://www.gnusolaris.org/ ). The VMS port has been improved. See L<perlvms>. Support for Cray XT4 Catamount/Qk has been added. See F<hints/catamount.sh> in the source code distribution for more information. Vendor patches have been merged for RedHat and Gentoo. DynaLoader::dl_unload_file() now works on Windows. =head1 Selected Bug Fixes =over 4 =item strictures in regexp-eval blocks C<strict> wasn't in effect in regexp-eval blocks (C</(?{...})/>). =item Calling CORE::require() CORE::require() and CORE::do() were always parsed as require() and do() when they were overridden. This is now fixed. =item Subscripts of slices You can now use a non-arrowed form for chained subscripts after a list slice, like in: ({foo => "bar"})[0]{foo} This used to be a syntax error; a C<< -> >> was required. =item C<no warnings 'category'> works correctly with -w Previously when running with warnings enabled globally via C<-w>, selective disabling of specific warning categories would actually turn off all warnings. This is now fixed; now C<no warnings 'io';> will only turn off warnings in the C<io> class. Previously it would erroneously turn off all warnings. =item threads improvements Several memory leaks in ithreads were closed. Also, ithreads were made less memory-intensive. C<threads> is now a dual-life module, also available on CPAN. It has been expanded in many ways. A kill() method is available for thread signalling. One can get thread status, or the list of running or joinable threads. A new C<< threads->exit() >> method is used to exit from the application (this is the default for the main thread) or from the current thread only (this is the default for all other threads). On the other hand, the exit() built-in now always causes the whole application to terminate. (Jerry D. Hedden) =item chr() and negative values chr() on a negative value now gives C<\x{FFFD}>, the Unicode replacement character, unless when the C<bytes> pragma is in effect, where the low eight bits of the value are used. =item PERL5SHELL and tainting On Windows, the PERL5SHELL environment variable is now checked for taintedness. (Rafael Garcia-Suarez) =item Using *FILE{IO} C<stat()> and C<-X> filetests now treat *FILE{IO} filehandles like *FILE filehandles. (Steve Peters) =item Overloading and reblessing Overloading now works when references are reblessed into another class. Internally, this has been implemented by moving the flag for "overloading" from the reference to the referent, which logically is where it should always have been. (Nicholas Clark) =item Overloading and UTF-8 A few bugs related to UTF-8 handling with objects that have stringification overloaded have been fixed. (Nicholas Clark) =item eval memory leaks fixed Traditionally, C<eval 'syntax error'> has leaked badly. Many (but not all) of these leaks have now been eliminated or reduced. (Dave Mitchell) =item Random device on Windows In previous versions, perl would read the file F</dev/urandom> if it existed when seeding its random number generator. That file is unlikely to exist on Windows, and if it did would probably not contain appropriate data, so perl no longer tries to read it on Windows. (Alex Davies) =item PERLIO_DEBUG The C<PERLIO_DEBUG> environment variable no longer has any effect for setuid scripts and for scripts run with B<-T>. Moreover, with a thread-enabled perl, using C<PERLIO_DEBUG> could lead to an internal buffer overflow. This has been fixed. =item PerlIO::scalar and read-only scalars PerlIO::scalar will now prevent writing to read-only scalars. Moreover, seek() is now supported with PerlIO::scalar-based filehandles, the underlying string being zero-filled as needed. (Rafael, Jarkko Hietaniemi) =item study() and UTF-8 study() never worked for UTF-8 strings, but could lead to false results. It's now a no-op on UTF-8 data. (Yves Orton) =item Critical signals The signals SIGILL, SIGBUS and SIGSEGV are now always delivered in an "unsafe" manner (contrary to other signals, that are deferred until the perl interpreter reaches a reasonably stable state; see L<perlipc/"Deferred Signals (Safe Signals)">). (Rafael) =item @INC-hook fix When a module or a file is loaded through an @INC-hook, and when this hook has set a filename entry in %INC, __FILE__ is now set for this module accordingly to the contents of that %INC entry. (Rafael) =item C<-t> switch fix The C<-w> and C<-t> switches can now be used together without messing up which categories of warnings are activated. (Rafael) =item Duping UTF-8 filehandles Duping a filehandle which has the C<:utf8> PerlIO layer set will now properly carry that layer on the duped filehandle. (Rafael) =item Localisation of hash elements Localizing a hash element whose key was given as a variable didn't work correctly if the variable was changed while the local() was in effect (as in C<local $h{$x}; ++$x>). (Bo Lindbergh) =back =head1 New or Changed Diagnostics =over 4 =item Use of uninitialized value Perl will now try to tell you the name of the variable (if any) that was undefined. =item Deprecated use of my() in false conditional A new deprecation warning, I<Deprecated use of my() in false conditional>, has been added, to warn against the use of the dubious and deprecated construct my $x if 0; See L<perldiag>. Use C<state> variables instead. =item !=~ should be !~ A new warning, C<!=~ should be !~>, is emitted to prevent this misspelling of the non-matching operator. =item Newline in left-justified string The warning I<Newline in left-justified string> has been removed. =item Too late for "-T" option The error I<Too late for "-T" option> has been reformulated to be more descriptive. =item "%s" variable %s masks earlier declaration This warning is now emitted in more consistent cases; in short, when one of the declarations involved is a C<my> variable: my $x; my $x; # warns my $x; our $x; # warns our $x; my $x; # warns On the other hand, the following: our $x; our $x; now gives a C<"our" variable %s redeclared> warning. =item readdir()/closedir()/etc. attempted on invalid dirhandle These new warnings are now emitted when a dirhandle is used but is either closed or not really a dirhandle. =item Opening dirhandle/filehandle %s also as a file/directory Two deprecation warnings have been added: (Rafael) Opening dirhandle %s also as a file Opening filehandle %s also as a directory =item Use of -P is deprecated Perl's command-line switch C<-P> is now deprecated. =item v-string in use/require is non-portable Perl will warn you against potential backwards compatibility problems with the C<use VERSION> syntax. =item perl -V C<perl -V> has several improvements, making it more useable from shell scripts to get the value of configuration variables. See L<perlrun> for details. =back =head1 Changed Internals In general, the source code of perl has been refactored, tidied up, and optimized in many places. Also, memory management and allocation has been improved in several points. When compiling the perl core with gcc, as many gcc warning flags are turned on as is possible on the platform. (This quest for cleanliness doesn't extend to XS code because we cannot guarantee the tidiness of code we didn't write.) Similar strictness flags have been added or tightened for various other C compilers. =head2 Reordering of SVt_* constants The relative ordering of constants that define the various types of C<SV> have changed; in particular, C<SVt_PVGV> has been moved before C<SVt_PVLV>, C<SVt_PVAV>, C<SVt_PVHV> and C<SVt_PVCV>. This is unlikely to make any difference unless you have code that explicitly makes assumptions about that ordering. (The inheritance hierarchy of C<B::*> objects has been changed to reflect this.) =head2 Elimination of SVt_PVBM Related to this, the internal type C<SVt_PVBM> has been removed. This dedicated type of C<SV> was used by the C<index> operator and parts of the regexp engine to facilitate fast Boyer-Moore matches. Its use internally has been replaced by C<SV>s of type C<SVt_PVGV>. =head2 New type SVt_BIND A new type C<SVt_BIND> has been added, in readiness for the project to implement Perl 6 on 5. There deliberately is no implementation yet, and they cannot yet be created or destroyed. =head2 Removal of CPP symbols The C preprocessor symbols C<PERL_PM_APIVERSION> and C<PERL_XS_APIVERSION>, which were supposed to give the version number of the oldest perl binary-compatible (resp. source-compatible) with the present one, were not used, and sometimes had misleading values. They have been removed. =head2 Less space is used by ops The C<BASEOP> structure now uses less space. The C<op_seq> field has been removed and replaced by a single bit bit-field C<op_opt>. C<op_type> is now 9 bits long. (Consequently, the C<B::OP> class doesn't provide an C<seq> method anymore.) =head2 New parser perl's parser is now generated by bison (it used to be generated by byacc.) As a result, it seems to be a bit more robust. Also, Dave Mitchell improved the lexer debugging output under C<-DT>. =head2 Use of C<const> Andy Lester supplied many improvements to determine which function parameters and local variables could actually be declared C<const> to the C compiler. Steve Peters provided new C<*_set> macros and reworked the core to use these rather than assigning to macros in LVALUE context. =head2 Mathoms A new file, F<mathoms.c>, has been added. It contains functions that are no longer used in the perl core, but that remain available for binary or source compatibility reasons. However, those functions will not be compiled in if you add C<-DNO_MATHOMS> in the compiler flags. =head2 C<AvFLAGS> has been removed The C<AvFLAGS> macro has been removed. =head2 C<av_*> changes The C<av_*()> functions, used to manipulate arrays, no longer accept null C<AV*> parameters. =head2 $^H and %^H The implementation of the special variables $^H and %^H has changed, to allow implementing lexical pragmas in pure Perl. =head2 B:: modules inheritance changed The inheritance hierarchy of C<B::> modules has changed; C<B::NV> now inherits from C<B::SV> (it used to inherit from C<B::IV>). =head2 Anonymous hash and array constructors The anonymous hash and array constructors now take 1 op in the optree instead of 3, now that pp_anonhash and pp_anonlist return a reference to a hash/array when the op is flagged with OPf_SPECIAL. (Nicholas Clark) =head1 Known Problems There's still a remaining problem in the implementation of the lexical C<$_>: it doesn't work inside C</(?{...})/> blocks. (See the TODO test in F<t/op/mydef.t>.) Stacked filetest operators won't work when the C<filetest> pragma is in effect, because they rely on the stat() buffer C<_> being populated, and filetest bypasses stat(). =head2 UTF-8 problems The handling of Unicode still is unclean in several places, where it's dependent on whether a string is internally flagged as UTF-8. This will be made more consistent in perl 5.12, but that won't be possible without a certain amount of backwards incompatibility. =head1 Platform Specific Problems When compiled with g++ and thread support on Linux, it's reported that the C<$!> stops working correctly. This is related to the fact that the glibc provides two strerror_r(3) implementation, and perl selects the wrong one. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/rt3/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. =head1 SEE ALSO The F<Changes> file and the perl590delta to perl595delta man pages for exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl5144delta.pod 0000644 00000014267 15125556335 0007566 0 ustar 00 =encoding utf8 =head1 NAME perl5144delta - what is new for perl v5.14.4 =head1 DESCRIPTION This document describes differences between the 5.14.3 release and the 5.14.4 release. If you are upgrading from an earlier release such as 5.12.0, first read L<perl5140delta>, which describes differences between 5.12.0 and 5.14.0. =head1 Core Enhancements No changes since 5.14.0. =head1 Security This release contains one major, and medium, and a number of minor security fixes. The latter are included mainly to allow the test suite to pass cleanly with the clang compiler's address sanitizer facility. =head2 CVE-2013-1667: memory exhaustion with arbitrary hash keys With a carefully crafted set of hash keys (for example arguments on a URL), it is possible to cause a hash to consume a large amount of memory and CPU, and thus possibly to achieve a Denial-of-Service. This problem has been fixed. =head2 memory leak in Encode The UTF-8 encoding implementation in Encode.xs had a memory leak which has been fixed. =head2 [perl #111594] Socket::unpack_sockaddr_un heap-buffer-overflow A read buffer overflow could occur when copying C<sockaddr> buffers. Fairly harmless. This problem has been fixed. =head2 [perl #111586] SDBM_File: fix off-by-one access to global ".dir" An extra byte was being copied for some string literals. Fairly harmless. This problem has been fixed. =head2 off-by-two error in List::Util A string literal was being used that included two bytes beyond the end of the string. Fairly harmless. This problem has been fixed. =head2 [perl #115994] fix segv in regcomp.c:S_join_exact() Under debugging builds, while marking optimised-out regex nodes as type C<OPTIMIZED>, it could treat blocks of exact text as if they were nodes, and thus SEGV. Fairly harmless. This problem has been fixed. =head2 [perl #115992] PL_eval_start use-after-free The statement C<local $[;>, when preceded by an C<eval>, and when not part of an assignment, could crash. Fairly harmless. This problem has been fixed. =head2 wrap-around with IO on long strings Reading or writing strings greater than 2**31 bytes in size could segfault due to integer wraparound. This problem has been fixed. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.14.0. If any exist, they are bugs and reports are welcome. =head1 Deprecations There have been no deprecations since 5.14.0. =head1 Modules and Pragmata =head2 New Modules and Pragmata None =head2 Updated Modules and Pragmata The following modules have just the minor code fixes as listed above in L</Security> (version numbers have not changed): =over 4 =item Socket =item SDBM_File =item List::Util =back L<Encode> has been upgraded from version 2.42_01 to version 2.42_02. L<Module::CoreList> has been updated to version 2.49_06 to add data for this release. =head2 Removed Modules and Pragmata None. =head1 Documentation =head2 New Documentation None. =head2 Changes to Existing Documentation None. =head1 Diagnostics No new or changed diagnostics. =head1 Utility Changes None =head1 Configuration and Compilation No changes. =head1 Platform Support =head2 New Platforms None. =head2 Discontinued Platforms None. =head2 Platform-Specific Notes =over 4 =item VMS 5.14.3 failed to compile on VMS due to incomplete application of a patch series that allowed C<userelocatableinc> and C<usesitecustomize> to be used simultaneously. Other platforms were not affected and the problem has now been corrected. =back =head1 Selected Bug Fixes =over 4 =item * In Perl 5.14.0, C<$tainted ~~ @array> stopped working properly. Sometimes it would erroneously fail (when C<$tainted> contained a string that occurs in the array I<after> the first element) or erroneously succeed (when C<undef> occurred after the first element) [perl #93590]. =back =head1 Known Problems None. =head1 Acknowledgements Perl 5.14.4 represents approximately 5 months of development since Perl 5.14.3 and contains approximately 1,700 lines of changes across 49 files from 12 authors. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.14.4: Andy Dougherty, Chris 'BinGOs' Williams, Christian Hansen, Craig A. Berry, Dave Rolsky, David Mitchell, Dominic Hargreaves, Father Chrysostomos, Florian Ragwitz, Reini Urban, Ricardo Signes, Yves Orton. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlfork.pod 0000644 00000032053 15125556335 0007111 0 ustar 00 =head1 NAME perlfork - Perl's fork() emulation =head1 SYNOPSIS NOTE: As of the 5.8.0 release, fork() emulation has considerably matured. However, there are still a few known bugs and differences from real fork() that might affect you. See the "BUGS" and "CAVEATS AND LIMITATIONS" sections below. Perl provides a fork() keyword that corresponds to the Unix system call of the same name. On most Unix-like platforms where the fork() system call is available, Perl's fork() simply calls it. On some platforms such as Windows where the fork() system call is not available, Perl can be built to emulate fork() at the interpreter level. While the emulation is designed to be as compatible as possible with the real fork() at the level of the Perl program, there are certain important differences that stem from the fact that all the pseudo child "processes" created this way live in the same real process as far as the operating system is concerned. This document provides a general overview of the capabilities and limitations of the fork() emulation. Note that the issues discussed here are not applicable to platforms where a real fork() is available and Perl has been configured to use it. =head1 DESCRIPTION The fork() emulation is implemented at the level of the Perl interpreter. What this means in general is that running fork() will actually clone the running interpreter and all its state, and run the cloned interpreter in a separate thread, beginning execution in the new thread just after the point where the fork() was called in the parent. We will refer to the thread that implements this child "process" as the pseudo-process. To the Perl program that called fork(), all this is designed to be transparent. The parent returns from the fork() with a pseudo-process ID that can be subsequently used in any process-manipulation functions; the child returns from the fork() with a value of C<0> to signify that it is the child pseudo-process. =head2 Behavior of other Perl features in forked pseudo-processes Most Perl features behave in a natural way within pseudo-processes. =over 8 =item $$ or $PROCESS_ID This special variable is correctly set to the pseudo-process ID. It can be used to identify pseudo-processes within a particular session. Note that this value is subject to recycling if any pseudo-processes are launched after others have been wait()-ed on. =item %ENV Each pseudo-process maintains its own virtual environment. Modifications to %ENV affect the virtual environment, and are only visible within that pseudo-process, and in any processes (or pseudo-processes) launched from it. =item chdir() and all other builtins that accept filenames Each pseudo-process maintains its own virtual idea of the current directory. Modifications to the current directory using chdir() are only visible within that pseudo-process, and in any processes (or pseudo-processes) launched from it. All file and directory accesses from the pseudo-process will correctly map the virtual working directory to the real working directory appropriately. =item wait() and waitpid() wait() and waitpid() can be passed a pseudo-process ID returned by fork(). These calls will properly wait for the termination of the pseudo-process and return its status. =item kill() C<kill('KILL', ...)> can be used to terminate a pseudo-process by passing it the ID returned by fork(). The outcome of kill on a pseudo-process is unpredictable and it should not be used except under dire circumstances, because the operating system may not guarantee integrity of the process resources when a running thread is terminated. The process which implements the pseudo-processes can be blocked and the Perl interpreter hangs. Note that using C<kill('KILL', ...)> on a pseudo-process() may typically cause memory leaks, because the thread that implements the pseudo-process does not get a chance to clean up its resources. C<kill('TERM', ...)> can also be used on pseudo-processes, but the signal will not be delivered while the pseudo-process is blocked by a system call, e.g. waiting for a socket to connect, or trying to read from a socket with no data available. Starting in Perl 5.14 the parent process will not wait for children to exit once they have been signalled with C<kill('TERM', ...)> to avoid deadlock during process exit. You will have to explicitly call waitpid() to make sure the child has time to clean-up itself, but you are then also responsible that the child is not blocking on I/O either. =item exec() Calling exec() within a pseudo-process actually spawns the requested executable in a separate process and waits for it to complete before exiting with the same exit status as that process. This means that the process ID reported within the running executable will be different from what the earlier Perl fork() might have returned. Similarly, any process manipulation functions applied to the ID returned by fork() will affect the waiting pseudo-process that called exec(), not the real process it is waiting for after the exec(). When exec() is called inside a pseudo-process then DESTROY methods and END blocks will still be called after the external process returns. =item exit() exit() always exits just the executing pseudo-process, after automatically wait()-ing for any outstanding child pseudo-processes. Note that this means that the process as a whole will not exit unless all running pseudo-processes have exited. See below for some limitations with open filehandles. =item Open handles to files, directories and network sockets All open handles are dup()-ed in pseudo-processes, so that closing any handles in one process does not affect the others. See below for some limitations. =back =head2 Resource limits In the eyes of the operating system, pseudo-processes created via the fork() emulation are simply threads in the same process. This means that any process-level limits imposed by the operating system apply to all pseudo-processes taken together. This includes any limits imposed by the operating system on the number of open file, directory and socket handles, limits on disk space usage, limits on memory size, limits on CPU utilization etc. =head2 Killing the parent process If the parent process is killed (either using Perl's kill() builtin, or using some external means) all the pseudo-processes are killed as well, and the whole process exits. =head2 Lifetime of the parent process and pseudo-processes During the normal course of events, the parent process and every pseudo-process started by it will wait for their respective pseudo-children to complete before they exit. This means that the parent and every pseudo-child created by it that is also a pseudo-parent will only exit after their pseudo-children have exited. Starting with Perl 5.14 a parent will not wait() automatically for any child that has been signalled with C<kill('TERM', ...)> to avoid a deadlock in case the child is blocking on I/O and never receives the signal. =head1 CAVEATS AND LIMITATIONS =over 8 =item BEGIN blocks The fork() emulation will not work entirely correctly when called from within a BEGIN block. The forked copy will run the contents of the BEGIN block, but will not continue parsing the source stream after the BEGIN block. For example, consider the following code: BEGIN { fork and exit; # fork child and exit the parent print "inner\n"; } print "outer\n"; This will print: inner rather than the expected: inner outer This limitation arises from fundamental technical difficulties in cloning and restarting the stacks used by the Perl parser in the middle of a parse. =item Open filehandles Any filehandles open at the time of the fork() will be dup()-ed. Thus, the files can be closed independently in the parent and child, but beware that the dup()-ed handles will still share the same seek pointer. Changing the seek position in the parent will change it in the child and vice-versa. One can avoid this by opening files that need distinct seek pointers separately in the child. On some operating systems, notably Solaris and Unixware, calling C<exit()> from a child process will flush and close open filehandles in the parent, thereby corrupting the filehandles. On these systems, calling C<_exit()> is suggested instead. C<_exit()> is available in Perl through the C<POSIX> module. Please consult your system's manpages for more information on this. =item Open directory handles Perl will completely read from all open directory handles until they reach the end of the stream. It will then seekdir() back to the original location and all future readdir() requests will be fulfilled from the cache buffer. That means that neither the directory handle held by the parent process nor the one held by the child process will see any changes made to the directory after the fork() call. Note that rewinddir() has a similar limitation on Windows and will not force readdir() to read the directory again either. Only a newly opened directory handle will reflect changes to the directory. =item Forking pipe open() not yet implemented The C<open(FOO, "|-")> and C<open(BAR, "-|")> constructs are not yet implemented. This limitation can be easily worked around in new code by creating a pipe explicitly. The following example shows how to write to a forked child: # simulate open(FOO, "|-") sub pipe_to_fork ($) { my $parent = shift; pipe my $child, $parent or die; my $pid = fork(); die "fork() failed: $!" unless defined $pid; if ($pid) { close $child; } else { close $parent; open(STDIN, "<&=" . fileno($child)) or die; } $pid; } if (pipe_to_fork('FOO')) { # parent print FOO "pipe_to_fork\n"; close FOO; } else { # child while (<STDIN>) { print; } exit(0); } And this one reads from the child: # simulate open(FOO, "-|") sub pipe_from_fork ($) { my $parent = shift; pipe $parent, my $child or die; my $pid = fork(); die "fork() failed: $!" unless defined $pid; if ($pid) { close $child; } else { close $parent; open(STDOUT, ">&=" . fileno($child)) or die; } $pid; } if (pipe_from_fork('BAR')) { # parent while (<BAR>) { print; } close BAR; } else { # child print "pipe_from_fork\n"; exit(0); } Forking pipe open() constructs will be supported in future. =item Global state maintained by XSUBs External subroutines (XSUBs) that maintain their own global state may not work correctly. Such XSUBs will either need to maintain locks to protect simultaneous access to global data from different pseudo-processes, or maintain all their state on the Perl symbol table, which is copied naturally when fork() is called. A callback mechanism that provides extensions an opportunity to clone their state will be provided in the near future. =item Interpreter embedded in larger application The fork() emulation may not behave as expected when it is executed in an application which embeds a Perl interpreter and calls Perl APIs that can evaluate bits of Perl code. This stems from the fact that the emulation only has knowledge about the Perl interpreter's own data structures and knows nothing about the containing application's state. For example, any state carried on the application's own call stack is out of reach. =item Thread-safety of extensions Since the fork() emulation runs code in multiple threads, extensions calling into non-thread-safe libraries may not work reliably when calling fork(). As Perl's threading support gradually becomes more widely adopted even on platforms with a native fork(), such extensions are expected to be fixed for thread-safety. =back =head1 PORTABILITY CAVEATS In portable Perl code, C<kill(9, $child)> must not be used on forked processes. Killing a forked process is unsafe and has unpredictable results. See L</kill()>, above. =head1 BUGS =over 8 =item * Having pseudo-process IDs be negative integers breaks down for the integer C<-1> because the wait() and waitpid() functions treat this number as being special. The tacit assumption in the current implementation is that the system never allocates a thread ID of C<1> for user threads. A better representation for pseudo-process IDs will be implemented in future. =item * In certain cases, the OS-level handles created by the pipe(), socket(), and accept() operators are apparently not duplicated accurately in pseudo-processes. This only happens in some situations, but where it does happen, it may result in deadlocks between the read and write ends of pipe handles, or inability to send or receive data across socket handles. =item * This document may be incomplete in some respects. =back =head1 AUTHOR Support for concurrent interpreters and the fork() emulation was implemented by ActiveState, with funding from Microsoft Corporation. This document is authored and maintained by Gurusamy Sarathy E<lt>gsar@activestate.comE<gt>. =head1 SEE ALSO L<perlfunc/"fork">, L<perlipc> =cut perlipc.pod 0000644 00000213551 15125556335 0006727 0 ustar 00 =head1 NAME perlipc - Perl interprocess communication (signals, fifos, pipes, safe subprocesses, sockets, and semaphores) =head1 DESCRIPTION The basic IPC facilities of Perl are built out of the good old Unix signals, named pipes, pipe opens, the Berkeley socket routines, and SysV IPC calls. Each is used in slightly different situations. =head1 Signals Perl uses a simple signal handling model: the %SIG hash contains names or references of user-installed signal handlers. These handlers will be called with an argument which is the name of the signal that triggered it. A signal may be generated intentionally from a particular keyboard sequence like control-C or control-Z, sent to you from another process, or triggered automatically by the kernel when special events transpire, like a child process exiting, your own process running out of stack space, or hitting a process file-size limit. For example, to trap an interrupt signal, set up a handler like this: our $shucks; sub catch_zap { my $signame = shift; $shucks++; die "Somebody sent me a SIG$signame"; } $SIG{INT} = __PACKAGE__ . "::catch_zap"; $SIG{INT} = \&catch_zap; # best strategy Prior to Perl 5.8.0 it was necessary to do as little as you possibly could in your handler; notice how all we do is set a global variable and then raise an exception. That's because on most systems, libraries are not re-entrant; particularly, memory allocation and I/O routines are not. That meant that doing nearly I<anything> in your handler could in theory trigger a memory fault and subsequent core dump - see L</Deferred Signals (Safe Signals)> below. The names of the signals are the ones listed out by C<kill -l> on your system, or you can retrieve them using the CPAN module L<IPC::Signal>. You may also choose to assign the strings C<"IGNORE"> or C<"DEFAULT"> as the handler, in which case Perl will try to discard the signal or do the default thing. On most Unix platforms, the C<CHLD> (sometimes also known as C<CLD>) signal has special behavior with respect to a value of C<"IGNORE">. Setting C<$SIG{CHLD}> to C<"IGNORE"> on such a platform has the effect of not creating zombie processes when the parent process fails to C<wait()> on its child processes (i.e., child processes are automatically reaped). Calling C<wait()> with C<$SIG{CHLD}> set to C<"IGNORE"> usually returns C<-1> on such platforms. Some signals can be neither trapped nor ignored, such as the KILL and STOP (but not the TSTP) signals. Note that ignoring signals makes them disappear. If you only want them blocked temporarily without them getting lost you'll have to use the C<POSIX> module's L<sigprocmask|POSIX/sigprocmask>. Sending a signal to a negative process ID means that you send the signal to the entire Unix process group. This code sends a hang-up signal to all processes in the current process group, and also sets $SIG{HUP} to C<"IGNORE"> so it doesn't kill itself: # block scope for local { local $SIG{HUP} = "IGNORE"; kill HUP => -getpgrp(); # snazzy writing of: kill("HUP", -getpgrp()) } Another interesting signal to send is signal number zero. This doesn't actually affect a child process, but instead checks whether it's alive or has changed its UIDs. unless (kill 0 => $kid_pid) { warn "something wicked happened to $kid_pid"; } Signal number zero may fail because you lack permission to send the signal when directed at a process whose real or saved UID is not identical to the real or effective UID of the sending process, even though the process is alive. You may be able to determine the cause of failure using C<$!> or C<%!>. unless (kill(0 => $pid) || $!{EPERM}) { warn "$pid looks dead"; } You might also want to employ anonymous functions for simple signal handlers: $SIG{INT} = sub { die "\nOutta here!\n" }; SIGCHLD handlers require some special care. If a second child dies while in the signal handler caused by the first death, we won't get another signal. So must loop here else we will leave the unreaped child as a zombie. And the next time two children die we get another zombie. And so on. use POSIX ":sys_wait_h"; $SIG{CHLD} = sub { while ((my $child = waitpid(-1, WNOHANG)) > 0) { $Kid_Status{$child} = $?; } }; # do something that forks... Be careful: qx(), system(), and some modules for calling external commands do a fork(), then wait() for the result. Thus, your signal handler will be called. Because wait() was already called by system() or qx(), the wait() in the signal handler will see no more zombies and will therefore block. The best way to prevent this issue is to use waitpid(), as in the following example: use POSIX ":sys_wait_h"; # for nonblocking read my %children; $SIG{CHLD} = sub { # don't change $! and $? outside handler local ($!, $?); while ( (my $pid = waitpid(-1, WNOHANG)) > 0 ) { delete $children{$pid}; cleanup_child($pid, $?); } }; while (1) { my $pid = fork(); die "cannot fork" unless defined $pid; if ($pid == 0) { # ... exit 0; } else { $children{$pid}=1; # ... system($command); # ... } } Signal handling is also used for timeouts in Unix. While safely protected within an C<eval{}> block, you set a signal handler to trap alarm signals and then schedule to have one delivered to you in some number of seconds. Then try your blocking operation, clearing the alarm when it's done but not before you've exited your C<eval{}> block. If it goes off, you'll use die() to jump out of the block. Here's an example: my $ALARM_EXCEPTION = "alarm clock restart"; eval { local $SIG{ALRM} = sub { die $ALARM_EXCEPTION }; alarm 10; flock($fh, 2) # blocking write lock || die "cannot flock: $!"; alarm 0; }; if ($@ && $@ !~ quotemeta($ALARM_EXCEPTION)) { die } If the operation being timed out is system() or qx(), this technique is liable to generate zombies. If this matters to you, you'll need to do your own fork() and exec(), and kill the errant child process. For more complex signal handling, you might see the standard POSIX module. Lamentably, this is almost entirely undocumented, but the F<ext/POSIX/t/sigaction.t> file from the Perl source distribution has some examples in it. =head2 Handling the SIGHUP Signal in Daemons A process that usually starts when the system boots and shuts down when the system is shut down is called a daemon (Disk And Execution MONitor). If a daemon process has a configuration file which is modified after the process has been started, there should be a way to tell that process to reread its configuration file without stopping the process. Many daemons provide this mechanism using a C<SIGHUP> signal handler. When you want to tell the daemon to reread the file, simply send it the C<SIGHUP> signal. The following example implements a simple daemon, which restarts itself every time the C<SIGHUP> signal is received. The actual code is located in the subroutine C<code()>, which just prints some debugging info to show that it works; it should be replaced with the real code. #!/usr/bin/perl use strict; use warnings; use POSIX (); use FindBin (); use File::Basename (); use File::Spec::Functions qw(catfile); $| = 1; # make the daemon cross-platform, so exec always calls the script # itself with the right path, no matter how the script was invoked. my $script = File::Basename::basename($0); my $SELF = catfile($FindBin::Bin, $script); # POSIX unmasks the sigprocmask properly $SIG{HUP} = sub { print "got SIGHUP\n"; exec($SELF, @ARGV) || die "$0: couldn't restart: $!"; }; code(); sub code { print "PID: $$\n"; print "ARGV: @ARGV\n"; my $count = 0; while (1) { sleep 2; print ++$count, "\n"; } } =head2 Deferred Signals (Safe Signals) Before Perl 5.8.0, installing Perl code to deal with signals exposed you to danger from two things. First, few system library functions are re-entrant. If the signal interrupts while Perl is executing one function (like malloc(3) or printf(3)), and your signal handler then calls the same function again, you could get unpredictable behavior--often, a core dump. Second, Perl isn't itself re-entrant at the lowest levels. If the signal interrupts Perl while Perl is changing its own internal data structures, similarly unpredictable behavior may result. There were two things you could do, knowing this: be paranoid or be pragmatic. The paranoid approach was to do as little as possible in your signal handler. Set an existing integer variable that already has a value, and return. This doesn't help you if you're in a slow system call, which will just restart. That means you have to C<die> to longjmp(3) out of the handler. Even this is a little cavalier for the true paranoiac, who avoids C<die> in a handler because the system I<is> out to get you. The pragmatic approach was to say "I know the risks, but prefer the convenience", and to do anything you wanted in your signal handler, and be prepared to clean up core dumps now and again. Perl 5.8.0 and later avoid these problems by "deferring" signals. That is, when the signal is delivered to the process by the system (to the C code that implements Perl) a flag is set, and the handler returns immediately. Then at strategic "safe" points in the Perl interpreter (e.g. when it is about to execute a new opcode) the flags are checked and the Perl level handler from %SIG is executed. The "deferred" scheme allows much more flexibility in the coding of signal handlers as we know the Perl interpreter is in a safe state, and that we are not in a system library function when the handler is called. However the implementation does differ from previous Perls in the following ways: =over 4 =item Long-running opcodes As the Perl interpreter looks at signal flags only when it is about to execute a new opcode, a signal that arrives during a long-running opcode (e.g. a regular expression operation on a very large string) will not be seen until the current opcode completes. If a signal of any given type fires multiple times during an opcode (such as from a fine-grained timer), the handler for that signal will be called only once, after the opcode completes; all other instances will be discarded. Furthermore, if your system's signal queue gets flooded to the point that there are signals that have been raised but not yet caught (and thus not deferred) at the time an opcode completes, those signals may well be caught and deferred during subsequent opcodes, with sometimes surprising results. For example, you may see alarms delivered even after calling C<alarm(0)> as the latter stops the raising of alarms but does not cancel the delivery of alarms raised but not yet caught. Do not depend on the behaviors described in this paragraph as they are side effects of the current implementation and may change in future versions of Perl. =item Interrupting IO When a signal is delivered (e.g., SIGINT from a control-C) the operating system breaks into IO operations like I<read>(2), which is used to implement Perl's readline() function, the C<< <> >> operator. On older Perls the handler was called immediately (and as C<read> is not "unsafe", this worked well). With the "deferred" scheme the handler is I<not> called immediately, and if Perl is using the system's C<stdio> library that library may restart the C<read> without returning to Perl to give it a chance to call the %SIG handler. If this happens on your system the solution is to use the C<:perlio> layer to do IO--at least on those handles that you want to be able to break into with signals. (The C<:perlio> layer checks the signal flags and calls %SIG handlers before resuming IO operation.) The default in Perl 5.8.0 and later is to automatically use the C<:perlio> layer. Note that it is not advisable to access a file handle within a signal handler where that signal has interrupted an I/O operation on that same handle. While perl will at least try hard not to crash, there are no guarantees of data integrity; for example, some data might get dropped or written twice. Some networking library functions like gethostbyname() are known to have their own implementations of timeouts which may conflict with your timeouts. If you have problems with such functions, try using the POSIX sigaction() function, which bypasses Perl safe signals. Be warned that this does subject you to possible memory corruption, as described above. Instead of setting C<$SIG{ALRM}>: local $SIG{ALRM} = sub { die "alarm" }; try something like the following: use POSIX qw(SIGALRM); POSIX::sigaction(SIGALRM, POSIX::SigAction->new(sub { die "alarm" })) || die "Error setting SIGALRM handler: $!\n"; Another way to disable the safe signal behavior locally is to use the C<Perl::Unsafe::Signals> module from CPAN, which affects all signals. =item Restartable system calls On systems that supported it, older versions of Perl used the SA_RESTART flag when installing %SIG handlers. This meant that restartable system calls would continue rather than returning when a signal arrived. In order to deliver deferred signals promptly, Perl 5.8.0 and later do I<not> use SA_RESTART. Consequently, restartable system calls can fail (with $! set to C<EINTR>) in places where they previously would have succeeded. The default C<:perlio> layer retries C<read>, C<write> and C<close> as described above; interrupted C<wait> and C<waitpid> calls will always be retried. =item Signals as "faults" Certain signals like SEGV, ILL, and BUS are generated by virtual memory addressing errors and similar "faults". These are normally fatal: there is little a Perl-level handler can do with them. So Perl delivers them immediately rather than attempting to defer them. =item Signals triggered by operating system state On some operating systems certain signal handlers are supposed to "do something" before returning. One example can be CHLD or CLD, which indicates a child process has completed. On some operating systems the signal handler is expected to C<wait> for the completed child process. On such systems the deferred signal scheme will not work for those signals: it does not do the C<wait>. Again the failure will look like a loop as the operating system will reissue the signal because there are completed child processes that have not yet been C<wait>ed for. =back If you want the old signal behavior back despite possible memory corruption, set the environment variable C<PERL_SIGNALS> to C<"unsafe">. This feature first appeared in Perl 5.8.1. =head1 Named Pipes A named pipe (often referred to as a FIFO) is an old Unix IPC mechanism for processes communicating on the same machine. It works just like regular anonymous pipes, except that the processes rendezvous using a filename and need not be related. To create a named pipe, use the C<POSIX::mkfifo()> function. use POSIX qw(mkfifo); mkfifo($path, 0700) || die "mkfifo $path failed: $!"; You can also use the Unix command mknod(1), or on some systems, mkfifo(1). These may not be in your normal path, though. # system return val is backwards, so && not || # $ENV{PATH} .= ":/etc:/usr/etc"; if ( system("mknod", $path, "p") && system("mkfifo", $path) ) { die "mk{nod,fifo} $path failed"; } A fifo is convenient when you want to connect a process to an unrelated one. When you open a fifo, the program will block until there's something on the other end. For example, let's say you'd like to have your F<.signature> file be a named pipe that has a Perl program on the other end. Now every time any program (like a mailer, news reader, finger program, etc.) tries to read from that file, the reading program will read the new signature from your program. We'll use the pipe-checking file-test operator, B<-p>, to find out whether anyone (or anything) has accidentally removed our fifo. chdir(); # go home my $FIFO = ".signature"; while (1) { unless (-p $FIFO) { unlink $FIFO; # discard any failure, will catch later require POSIX; # delayed loading of heavy module POSIX::mkfifo($FIFO, 0700) || die "can't mkfifo $FIFO: $!"; } # next line blocks till there's a reader open (my $fh, ">", $FIFO) || die "can't open $FIFO: $!"; print $fh "John Smith (smith\@host.org)\n", `fortune -s`; close($fh) || die "can't close $FIFO: $!"; sleep 2; # to avoid dup signals } =head1 Using open() for IPC Perl's basic open() statement can also be used for unidirectional interprocess communication by specifying the open mode as C<|-> or C<-|>. Here's how to start something up in a child process you intend to write to: open(my $spooler, "|-", "cat -v | lpr -h 2>/dev/null") || die "can't fork: $!"; local $SIG{PIPE} = sub { die "spooler pipe broke" }; print $spooler "stuff\n"; close $spooler || die "bad spool: $! $?"; And here's how to start up a child process you intend to read from: open(my $status, "-|", "netstat -an 2>&1") || die "can't fork: $!"; while (<$status>) { next if /^(tcp|udp)/; print; } close $status || die "bad netstat: $! $?"; Be aware that these operations are full Unix forks, which means they may not be correctly implemented on all alien systems. See L<perlport/open> for portability details. In the two-argument form of open(), a pipe open can be achieved by either appending or prepending a pipe symbol to the second argument: open(my $spooler, "| cat -v | lpr -h 2>/dev/null") || die "can't fork: $!"; open(my $status, "netstat -an 2>&1 |") || die "can't fork: $!"; This can be used even on systems that do not support forking, but this possibly allows code intended to read files to unexpectedly execute programs. If one can be sure that a particular program is a Perl script expecting filenames in @ARGV using the two-argument form of open() or the C<< <> >> operator, the clever programmer can write something like this: % program f1 "cmd1|" - f2 "cmd2|" f3 < tmpfile and no matter which sort of shell it's called from, the Perl program will read from the file F<f1>, the process F<cmd1>, standard input (F<tmpfile> in this case), the F<f2> file, the F<cmd2> command, and finally the F<f3> file. Pretty nifty, eh? You might notice that you could use backticks for much the same effect as opening a pipe for reading: print grep { !/^(tcp|udp)/ } `netstat -an 2>&1`; die "bad netstatus ($?)" if $?; While this is true on the surface, it's much more efficient to process the file one line or record at a time because then you don't have to read the whole thing into memory at once. It also gives you finer control of the whole process, letting you kill off the child process early if you'd like. Be careful to check the return values from both open() and close(). If you're I<writing> to a pipe, you should also trap SIGPIPE. Otherwise, think of what happens when you start up a pipe to a command that doesn't exist: the open() will in all likelihood succeed (it only reflects the fork()'s success), but then your output will fail--spectacularly. Perl can't know whether the command worked, because your command is actually running in a separate process whose exec() might have failed. Therefore, while readers of bogus commands return just a quick EOF, writers to bogus commands will get hit with a signal, which they'd best be prepared to handle. Consider: open(my $fh, "|-", "bogus") || die "can't fork: $!"; print $fh "bang\n"; # neither necessary nor sufficient # to check print retval! close($fh) || die "can't close: $!"; The reason for not checking the return value from print() is because of pipe buffering; physical writes are delayed. That won't blow up until the close, and it will blow up with a SIGPIPE. To catch it, you could use this: $SIG{PIPE} = "IGNORE"; open(my $fh, "|-", "bogus") || die "can't fork: $!"; print $fh "bang\n"; close($fh) || die "can't close: status=$?"; =head2 Filehandles Both the main process and any child processes it forks share the same STDIN, STDOUT, and STDERR filehandles. If both processes try to access them at once, strange things can happen. You may also want to close or reopen the filehandles for the child. You can get around this by opening your pipe with open(), but on some systems this means that the child process cannot outlive the parent. =head2 Background Processes You can run a command in the background with: system("cmd &"); The command's STDOUT and STDERR (and possibly STDIN, depending on your shell) will be the same as the parent's. You won't need to catch SIGCHLD because of the double-fork taking place; see below for details. =head2 Complete Dissociation of Child from Parent In some cases (starting server processes, for instance) you'll want to completely dissociate the child process from the parent. This is often called daemonization. A well-behaved daemon will also chdir() to the root directory so it doesn't prevent unmounting the filesystem containing the directory from which it was launched, and redirect its standard file descriptors from and to F</dev/null> so that random output doesn't wind up on the user's terminal. use POSIX "setsid"; sub daemonize { chdir("/") || die "can't chdir to /: $!"; open(STDIN, "<", "/dev/null") || die "can't read /dev/null: $!"; open(STDOUT, ">", "/dev/null") || die "can't write /dev/null: $!"; defined(my $pid = fork()) || die "can't fork: $!"; exit if $pid; # non-zero now means I am the parent (setsid() != -1) || die "Can't start a new session: $!"; open(STDERR, ">&", STDOUT) || die "can't dup stdout: $!"; } The fork() has to come before the setsid() to ensure you aren't a process group leader; the setsid() will fail if you are. If your system doesn't have the setsid() function, open F</dev/tty> and use the C<TIOCNOTTY> ioctl() on it instead. See tty(4) for details. Non-Unix users should check their C<< I<Your_OS>::Process >> module for other possible solutions. =head2 Safe Pipe Opens Another interesting approach to IPC is making your single program go multiprocess and communicate between--or even amongst--yourselves. The two-argument form of the open() function will accept a file argument of either C<"-|"> or C<"|-"> to do a very interesting thing: it forks a child connected to the filehandle you've opened. The child is running the same program as the parent. This is useful for safely opening a file when running under an assumed UID or GID, for example. If you open a pipe I<to> minus, you can write to the filehandle you opened and your kid will find it in I<his> STDIN. If you open a pipe I<from> minus, you can read from the filehandle you opened whatever your kid writes to I<his> STDOUT. my $PRECIOUS = "/path/to/some/safe/file"; my $sleep_count; my $pid; my $kid_to_write; do { $pid = open($kid_to_write, "|-"); unless (defined $pid) { warn "cannot fork: $!"; die "bailing out" if $sleep_count++ > 6; sleep 10; } } until defined $pid; if ($pid) { # I am the parent print $kid_to_write @some_data; close($kid_to_write) || warn "kid exited $?"; } else { # I am the child # drop permissions in setuid and/or setgid programs: ($>, $)) = ($<, $(); open (my $outfile, ">", $PRECIOUS) || die "can't open $PRECIOUS: $!"; while (<STDIN>) { print $outfile; # child STDIN is parent $kid_to_write } close($outfile) || die "can't close $PRECIOUS: $!"; exit(0); # don't forget this!! } Another common use for this construct is when you need to execute something without the shell's interference. With system(), it's straightforward, but you can't use a pipe open or backticks safely. That's because there's no way to stop the shell from getting its hands on your arguments. Instead, use lower-level control to call exec() directly. Here's a safe backtick or pipe open for read: my $pid = open(my $kid_to_read, "-|"); defined($pid) || die "can't fork: $!"; if ($pid) { # parent while (<$kid_to_read>) { # do something interesting } close($kid_to_read) || warn "kid exited $?"; } else { # child ($>, $)) = ($<, $(); # suid only exec($program, @options, @args) || die "can't exec program: $!"; # NOTREACHED } And here's a safe pipe open for writing: my $pid = open(my $kid_to_write, "|-"); defined($pid) || die "can't fork: $!"; $SIG{PIPE} = sub { die "whoops, $program pipe broke" }; if ($pid) { # parent print $kid_to_write @data; close($kid_to_write) || warn "kid exited $?"; } else { # child ($>, $)) = ($<, $(); exec($program, @options, @args) || die "can't exec program: $!"; # NOTREACHED } It is very easy to dead-lock a process using this form of open(), or indeed with any use of pipe() with multiple subprocesses. The example above is "safe" because it is simple and calls exec(). See L</"Avoiding Pipe Deadlocks"> for general safety principles, but there are extra gotchas with Safe Pipe Opens. In particular, if you opened the pipe using C<open $fh, "|-">, then you cannot simply use close() in the parent process to close an unwanted writer. Consider this code: my $pid = open(my $writer, "|-"); # fork open a kid defined($pid) || die "first fork failed: $!"; if ($pid) { if (my $sub_pid = fork()) { defined($sub_pid) || die "second fork failed: $!"; close($writer) || die "couldn't close writer: $!"; # now do something else... } else { # first write to $writer # ... # then when finished close($writer) || die "couldn't close writer: $!"; exit(0); } } else { # first do something with STDIN, then exit(0); } In the example above, the true parent does not want to write to the $writer filehandle, so it closes it. However, because $writer was opened using C<open $fh, "|-">, it has a special behavior: closing it calls waitpid() (see L<perlfunc/waitpid>), which waits for the subprocess to exit. If the child process ends up waiting for something happening in the section marked "do something else", you have deadlock. This can also be a problem with intermediate subprocesses in more complicated code, which will call waitpid() on all open filehandles during global destruction--in no predictable order. To solve this, you must manually use pipe(), fork(), and the form of open() which sets one file descriptor to another, as shown below: pipe(my $reader, my $writer) || die "pipe failed: $!"; my $pid = fork(); defined($pid) || die "first fork failed: $!"; if ($pid) { close $reader; if (my $sub_pid = fork()) { defined($sub_pid) || die "first fork failed: $!"; close($writer) || die "can't close writer: $!"; } else { # write to $writer... # ... # then when finished close($writer) || die "can't close writer: $!"; exit(0); } # write to $writer... } else { open(STDIN, "<&", $reader) || die "can't reopen STDIN: $!"; close($writer) || die "can't close writer: $!"; # do something... exit(0); } Since Perl 5.8.0, you can also use the list form of C<open> for pipes. This is preferred when you wish to avoid having the shell interpret metacharacters that may be in your command string. So for example, instead of using: open(my $ps_pipe, "-|", "ps aux") || die "can't open ps pipe: $!"; One would use either of these: open(my $ps_pipe, "-|", "ps", "aux") || die "can't open ps pipe: $!"; my @ps_args = qw[ ps aux ]; open(my $ps_pipe, "-|", @ps_args) || die "can't open @ps_args|: $!"; Because there are more than three arguments to open(), it forks the ps(1) command I<without> spawning a shell, and reads its standard output via the C<$ps_pipe> filehandle. The corresponding syntax to I<write> to command pipes is to use C<"|-"> in place of C<"-|">. This was admittedly a rather silly example, because you're using string literals whose content is perfectly safe. There is therefore no cause to resort to the harder-to-read, multi-argument form of pipe open(). However, whenever you cannot be assured that the program arguments are free of shell metacharacters, the fancier form of open() should be used. For example: my @grep_args = ("egrep", "-i", $some_pattern, @many_files); open(my $grep_pipe, "-|", @grep_args) || die "can't open @grep_args|: $!"; Here the multi-argument form of pipe open() is preferred because the pattern and indeed even the filenames themselves might hold metacharacters. =head2 Avoiding Pipe Deadlocks Whenever you have more than one subprocess, you must be careful that each closes whichever half of any pipes created for interprocess communication it is not using. This is because any child process reading from the pipe and expecting an EOF will never receive it, and therefore never exit. A single process closing a pipe is not enough to close it; the last process with the pipe open must close it for it to read EOF. Certain built-in Unix features help prevent this most of the time. For instance, filehandles have a "close on exec" flag, which is set I<en masse> under control of the C<$^F> variable. This is so any filehandles you didn't explicitly route to the STDIN, STDOUT or STDERR of a child I<program> will be automatically closed. Always explicitly and immediately call close() on the writable end of any pipe, unless that process is actually writing to it. Even if you don't explicitly call close(), Perl will still close() all filehandles during global destruction. As previously discussed, if those filehandles have been opened with Safe Pipe Open, this will result in calling waitpid(), which may again deadlock. =head2 Bidirectional Communication with Another Process While this works reasonably well for unidirectional communication, what about bidirectional communication? The most obvious approach doesn't work: # THIS DOES NOT WORK!! open(my $prog_for_reading_and_writing, "| some program |") If you forget to C<use warnings>, you'll miss out entirely on the helpful diagnostic message: Can't do bidirectional pipe at -e line 1. If you really want to, you can use the standard open2() from the L<IPC::Open2> module to catch both ends. There's also an open3() in L<IPC::Open3> for tridirectional I/O so you can also catch your child's STDERR, but doing so would then require an awkward select() loop and wouldn't allow you to use normal Perl input operations. If you look at its source, you'll see that open2() uses low-level primitives like the pipe() and exec() syscalls to create all the connections. Although it might have been more efficient by using socketpair(), this would have been even less portable than it already is. The open2() and open3() functions are unlikely to work anywhere except on a Unix system, or at least one purporting POSIX compliance. =for TODO Hold on, is this even true? First it says that socketpair() is avoided for portability, but then it says it probably won't work except on Unixy systems anyway. Which one of those is true? Here's an example of using open2(): use IPC::Open2; my $pid = open2(my $reader, my $writer, "cat -un"); print $writer "stuff\n"; my $got = <$reader>; waitpid $pid, 0; The problem with this is that buffering is really going to ruin your day. Even though your C<$writer> filehandle is auto-flushed so the process on the other end gets your data in a timely manner, you can't usually do anything to force that process to give its data to you in a similarly quick fashion. In this special case, we could actually so, because we gave I<cat> a B<-u> flag to make it unbuffered. But very few commands are designed to operate over pipes, so this seldom works unless you yourself wrote the program on the other end of the double-ended pipe. A solution to this is to use a library which uses pseudottys to make your program behave more reasonably. This way you don't have to have control over the source code of the program you're using. The C<Expect> module from CPAN also addresses this kind of thing. This module requires two other modules from CPAN, C<IO::Pty> and C<IO::Stty>. It sets up a pseudo terminal to interact with programs that insist on talking to the terminal device driver. If your system is supported, this may be your best bet. =head2 Bidirectional Communication with Yourself If you want, you may make low-level pipe() and fork() syscalls to stitch this together by hand. This example only talks to itself, but you could reopen the appropriate handles to STDIN and STDOUT and call other processes. (The following example lacks proper error checking.) #!/usr/bin/perl # pipe1 - bidirectional communication using two pipe pairs # designed for the socketpair-challenged use strict; use warnings; use IO::Handle; # enable autoflush method before Perl 5.14 pipe(my $parent_rdr, my $child_wtr); # XXX: check failure? pipe(my $child_rdr, my $parent_wtr); # XXX: check failure? $child_wtr->autoflush(1); $parent_wtr->autoflush(1); if ($pid = fork()) { close $parent_rdr; close $parent_wtr; print $child_wtr "Parent Pid $$ is sending this\n"; chomp(my $line = <$child_rdr>); print "Parent Pid $$ just read this: '$line'\n"; close $child_rdr; close $child_wtr; waitpid($pid, 0); } else { die "cannot fork: $!" unless defined $pid; close $child_rdr; close $child_wtr; chomp(my $line = <$parent_rdr>); print "Child Pid $$ just read this: '$line'\n"; print $parent_wtr "Child Pid $$ is sending this\n"; close $parent_rdr; close $parent_wtr; exit(0); } But you don't actually have to make two pipe calls. If you have the socketpair() system call, it will do this all for you. #!/usr/bin/perl # pipe2 - bidirectional communication using socketpair # "the best ones always go both ways" use strict; use warnings; use Socket; use IO::Handle; # enable autoflush method before Perl 5.14 # We say AF_UNIX because although *_LOCAL is the # POSIX 1003.1g form of the constant, many machines # still don't have it. socketpair(my $child, my $parent, AF_UNIX, SOCK_STREAM, PF_UNSPEC) || die "socketpair: $!"; $child->autoflush(1); $parent->autoflush(1); if ($pid = fork()) { close $parent; print $child "Parent Pid $$ is sending this\n"; chomp(my $line = <$child>); print "Parent Pid $$ just read this: '$line'\n"; close $child; waitpid($pid, 0); } else { die "cannot fork: $!" unless defined $pid; close $child; chomp(my $line = <$parent>); print "Child Pid $$ just read this: '$line'\n"; print $parent "Child Pid $$ is sending this\n"; close $parent; exit(0); } =head1 Sockets: Client/Server Communication While not entirely limited to Unix-derived operating systems (e.g., WinSock on PCs provides socket support, as do some VMS libraries), you might not have sockets on your system, in which case this section probably isn't going to do you much good. With sockets, you can do both virtual circuits like TCP streams and datagrams like UDP packets. You may be able to do even more depending on your system. The Perl functions for dealing with sockets have the same names as the corresponding system calls in C, but their arguments tend to differ for two reasons. First, Perl filehandles work differently than C file descriptors. Second, Perl already knows the length of its strings, so you don't need to pass that information. One of the major problems with ancient, antemillennial socket code in Perl was that it used hard-coded values for some of the constants, which severely hurt portability. If you ever see code that does anything like explicitly setting C<$AF_INET = 2>, you know you're in for big trouble. An immeasurably superior approach is to use the L<Socket> module, which more reliably grants access to the various constants and functions you'll need. If you're not writing a server/client for an existing protocol like NNTP or SMTP, you should give some thought to how your server will know when the client has finished talking, and vice-versa. Most protocols are based on one-line messages and responses (so one party knows the other has finished when a "\n" is received) or multi-line messages and responses that end with a period on an empty line ("\n.\n" terminates a message/response). =head2 Internet Line Terminators The Internet line terminator is "\015\012". Under ASCII variants of Unix, that could usually be written as "\r\n", but under other systems, "\r\n" might at times be "\015\015\012", "\012\012\015", or something completely different. The standards specify writing "\015\012" to be conformant (be strict in what you provide), but they also recommend accepting a lone "\012" on input (be lenient in what you require). We haven't always been very good about that in the code in this manpage, but unless you're on a Mac from way back in its pre-Unix dark ages, you'll probably be ok. =head2 Internet TCP Clients and Servers Use Internet-domain sockets when you want to do client-server communication that might extend to machines outside of your own system. Here's a sample TCP client using Internet-domain sockets: #!/usr/bin/perl use strict; use warnings; use Socket; my $remote = shift || "localhost"; my $port = shift || 2345; # random port if ($port =~ /\D/) { $port = getservbyname($port, "tcp") } die "No port" unless $port; my $iaddr = inet_aton($remote) || die "no host: $remote"; my $paddr = sockaddr_in($port, $iaddr); my $proto = getprotobyname("tcp"); socket(my $sock, PF_INET, SOCK_STREAM, $proto) || die "socket: $!"; connect($sock, $paddr) || die "connect: $!"; while (my $line = <$sock>) { print $line; } close ($sock) || die "close: $!"; exit(0); And here's a corresponding server to go along with it. We'll leave the address as C<INADDR_ANY> so that the kernel can choose the appropriate interface on multihomed hosts. If you want sit on a particular interface (like the external side of a gateway or firewall machine), fill this in with your real address instead. #!/usr/bin/perl -T use strict; use warnings; BEGIN { $ENV{PATH} = "/usr/bin:/bin" } use Socket; use Carp; my $EOL = "\015\012"; sub logmsg { print "$0 $$: @_ at ", scalar localtime(), "\n" } my $port = shift || 2345; die "invalid port" unless $port =~ /^ \d+ $/x; my $proto = getprotobyname("tcp"); socket(my $server, PF_INET, SOCK_STREAM, $proto) || die "socket: $!"; setsockopt($server, SOL_SOCKET, SO_REUSEADDR, pack("l", 1)) || die "setsockopt: $!"; bind($server, sockaddr_in($port, INADDR_ANY)) || die "bind: $!"; listen($server, SOMAXCONN) || die "listen: $!"; logmsg "server started on port $port"; for (my $paddr; $paddr = accept(my $client, $server); close $client) { my($port, $iaddr) = sockaddr_in($paddr); my $name = gethostbyaddr($iaddr, AF_INET); logmsg "connection from $name [", inet_ntoa($iaddr), "] at port $port"; print $client "Hello there, $name, it's now ", scalar localtime(), $EOL; } And here's a multitasking version. It's multitasked in that like most typical servers, it spawns (fork()s) a slave server to handle the client request so that the master server can quickly go back to service a new client. #!/usr/bin/perl -T use strict; use warnings; BEGIN { $ENV{PATH} = "/usr/bin:/bin" } use Socket; use Carp; my $EOL = "\015\012"; sub spawn; # forward declaration sub logmsg { print "$0 $$: @_ at ", scalar localtime(), "\n" } my $port = shift || 2345; die "invalid port" unless $port =~ /^ \d+ $/x; my $proto = getprotobyname("tcp"); socket(my $server, PF_INET, SOCK_STREAM, $proto) || die "socket: $!"; setsockopt($server, SOL_SOCKET, SO_REUSEADDR, pack("l", 1)) || die "setsockopt: $!"; bind($server, sockaddr_in($port, INADDR_ANY)) || die "bind: $!"; listen($server, SOMAXCONN) || die "listen: $!"; logmsg "server started on port $port"; my $waitedpid = 0; use POSIX ":sys_wait_h"; use Errno; sub REAPER { local $!; # don't let waitpid() overwrite current error while ((my $pid = waitpid(-1, WNOHANG)) > 0 && WIFEXITED($?)) { logmsg "reaped $waitedpid" . ($? ? " with exit $?" : ""); } $SIG{CHLD} = \&REAPER; # loathe SysV } $SIG{CHLD} = \&REAPER; while (1) { my $paddr = accept(my $client, $server) || do { # try again if accept() returned because got a signal next if $!{EINTR}; die "accept: $!"; }; my ($port, $iaddr) = sockaddr_in($paddr); my $name = gethostbyaddr($iaddr, AF_INET); logmsg "connection from $name [", inet_ntoa($iaddr), "] at port $port"; spawn $client, sub { $| = 1; print "Hello there, $name, it's now ", scalar localtime(), $EOL; exec "/usr/games/fortune" # XXX: "wrong" line terminators or confess "can't exec fortune: $!"; }; close $client; } sub spawn { my $client = shift; my $coderef = shift; unless (@_ == 0 && $coderef && ref($coderef) eq "CODE") { confess "usage: spawn CLIENT CODEREF"; } my $pid; unless (defined($pid = fork())) { logmsg "cannot fork: $!"; return; } elsif ($pid) { logmsg "begat $pid"; return; # I'm the parent } # else I'm the child -- go spawn open(STDIN, "<&", $client) || die "can't dup client to stdin"; open(STDOUT, ">&", $client) || die "can't dup client to stdout"; ## open(STDERR, ">&", STDOUT) || die "can't dup stdout to stderr"; exit($coderef->()); } This server takes the trouble to clone off a child version via fork() for each incoming request. That way it can handle many requests at once, which you might not always want. Even if you don't fork(), the listen() will allow that many pending connections. Forking servers have to be particularly careful about cleaning up their dead children (called "zombies" in Unix parlance), because otherwise you'll quickly fill up your process table. The REAPER subroutine is used here to call waitpid() for any child processes that have finished, thereby ensuring that they terminate cleanly and don't join the ranks of the living dead. Within the while loop we call accept() and check to see if it returns a false value. This would normally indicate a system error needs to be reported. However, the introduction of safe signals (see L</Deferred Signals (Safe Signals)> above) in Perl 5.8.0 means that accept() might also be interrupted when the process receives a signal. This typically happens when one of the forked subprocesses exits and notifies the parent process with a CHLD signal. If accept() is interrupted by a signal, $! will be set to EINTR. If this happens, we can safely continue to the next iteration of the loop and another call to accept(). It is important that your signal handling code not modify the value of $!, or else this test will likely fail. In the REAPER subroutine we create a local version of $! before calling waitpid(). When waitpid() sets $! to ECHILD as it inevitably does when it has no more children waiting, it updates the local copy and leaves the original unchanged. You should use the B<-T> flag to enable taint checking (see L<perlsec>) even if we aren't running setuid or setgid. This is always a good idea for servers or any program run on behalf of someone else (like CGI scripts), because it lessens the chances that people from the outside will be able to compromise your system. Let's look at another TCP client. This one connects to the TCP "time" service on a number of different machines and shows how far their clocks differ from the system on which it's being run: #!/usr/bin/perl use strict; use warnings; use Socket; my $SECS_OF_70_YEARS = 2208988800; sub ctime { scalar localtime(shift() || time()) } my $iaddr = gethostbyname("localhost"); my $proto = getprotobyname("tcp"); my $port = getservbyname("time", "tcp"); my $paddr = sockaddr_in(0, $iaddr); $| = 1; printf "%-24s %8s %s\n", "localhost", 0, ctime(); foreach my $host (@ARGV) { printf "%-24s ", $host; my $hisiaddr = inet_aton($host) || die "unknown host"; my $hispaddr = sockaddr_in($port, $hisiaddr); socket(my $socket, PF_INET, SOCK_STREAM, $proto) || die "socket: $!"; connect($socket, $hispaddr) || die "connect: $!"; my $rtime = pack("C4", ()); read($socket, $rtime, 4); close($socket); my $histime = unpack("N", $rtime) - $SECS_OF_70_YEARS; printf "%8d %s\n", $histime - time(), ctime($histime); } =head2 Unix-Domain TCP Clients and Servers That's fine for Internet-domain clients and servers, but what about local communications? While you can use the same setup, sometimes you don't want to. Unix-domain sockets are local to the current host, and are often used internally to implement pipes. Unlike Internet domain sockets, Unix domain sockets can show up in the file system with an ls(1) listing. % ls -l /dev/log srw-rw-rw- 1 root 0 Oct 31 07:23 /dev/log You can test for these with Perl's B<-S> file test: unless (-S "/dev/log") { die "something's wicked with the log system"; } Here's a sample Unix-domain client: #!/usr/bin/perl use Socket; use strict; use warnings; my $rendezvous = shift || "catsock"; socket(my $sock, PF_UNIX, SOCK_STREAM, 0) || die "socket: $!"; connect($sock, sockaddr_un($rendezvous)) || die "connect: $!"; while (defined(my $line = <$sock>)) { print $line; } exit(0); And here's a corresponding server. You don't have to worry about silly network terminators here because Unix domain sockets are guaranteed to be on the localhost, and thus everything works right. #!/usr/bin/perl -T use strict; use warnings; use Socket; use Carp; BEGIN { $ENV{PATH} = "/usr/bin:/bin" } sub spawn; # forward declaration sub logmsg { print "$0 $$: @_ at ", scalar localtime(), "\n" } my $NAME = "catsock"; my $uaddr = sockaddr_un($NAME); my $proto = getprotobyname("tcp"); socket(my $server, PF_UNIX, SOCK_STREAM, 0) || die "socket: $!"; unlink($NAME); bind ($server, $uaddr) || die "bind: $!"; listen($server, SOMAXCONN) || die "listen: $!"; logmsg "server started on $NAME"; my $waitedpid; use POSIX ":sys_wait_h"; sub REAPER { my $child; while (($waitedpid = waitpid(-1, WNOHANG)) > 0) { logmsg "reaped $waitedpid" . ($? ? " with exit $?" : ""); } $SIG{CHLD} = \&REAPER; # loathe SysV } $SIG{CHLD} = \&REAPER; for ( $waitedpid = 0; accept(my $client, $server) || $waitedpid; $waitedpid = 0, close $client) { next if $waitedpid; logmsg "connection on $NAME"; spawn $client, sub { print "Hello there, it's now ", scalar localtime(), "\n"; exec("/usr/games/fortune") || die "can't exec fortune: $!"; }; } sub spawn { my $client = shift(); my $coderef = shift(); unless (@_ == 0 && $coderef && ref($coderef) eq "CODE") { confess "usage: spawn CLIENT CODEREF"; } my $pid; unless (defined($pid = fork())) { logmsg "cannot fork: $!"; return; } elsif ($pid) { logmsg "begat $pid"; return; # I'm the parent } else { # I'm the child -- go spawn } open(STDIN, "<&", $client) || die "can't dup client to stdin"; open(STDOUT, ">&", $client) || die "can't dup client to stdout"; ## open(STDERR, ">&", STDOUT) ## || die "can't dup stdout to stderr"; exit($coderef->()); } As you see, it's remarkably similar to the Internet domain TCP server, so much so, in fact, that we've omitted several duplicate functions--spawn(), logmsg(), ctime(), and REAPER()--which are the same as in the other server. So why would you ever want to use a Unix domain socket instead of a simpler named pipe? Because a named pipe doesn't give you sessions. You can't tell one process's data from another's. With socket programming, you get a separate session for each client; that's why accept() takes two arguments. For example, let's say that you have a long-running database server daemon that you want folks to be able to access from the Web, but only if they go through a CGI interface. You'd have a small, simple CGI program that does whatever checks and logging you feel like, and then acts as a Unix-domain client and connects to your private server. =head1 TCP Clients with IO::Socket For those preferring a higher-level interface to socket programming, the IO::Socket module provides an object-oriented approach. If for some reason you lack this module, you can just fetch IO::Socket from CPAN, where you'll also find modules providing easy interfaces to the following systems: DNS, FTP, Ident (RFC 931), NIS and NISPlus, NNTP, Ping, POP3, SMTP, SNMP, SSLeay, Telnet, and Time--to name just a few. =head2 A Simple Client Here's a client that creates a TCP connection to the "daytime" service at port 13 of the host name "localhost" and prints out everything that the server there cares to provide. #!/usr/bin/perl use strict; use warnings; use IO::Socket; my $remote = IO::Socket::INET->new( Proto => "tcp", PeerAddr => "localhost", PeerPort => "daytime(13)", ) || die "can't connect to daytime service on localhost"; while (<$remote>) { print } When you run this program, you should get something back that looks like this: Wed May 14 08:40:46 MDT 1997 Here are what those parameters to the new() constructor mean: =over 4 =item C<Proto> This is which protocol to use. In this case, the socket handle returned will be connected to a TCP socket, because we want a stream-oriented connection, that is, one that acts pretty much like a plain old file. Not all sockets are this of this type. For example, the UDP protocol can be used to make a datagram socket, used for message-passing. =item C<PeerAddr> This is the name or Internet address of the remote host the server is running on. We could have specified a longer name like C<"www.perl.com">, or an address like C<"207.171.7.72">. For demonstration purposes, we've used the special hostname C<"localhost">, which should always mean the current machine you're running on. The corresponding Internet address for localhost is C<"127.0.0.1">, if you'd rather use that. =item C<PeerPort> This is the service name or port number we'd like to connect to. We could have gotten away with using just C<"daytime"> on systems with a well-configured system services file,[FOOTNOTE: The system services file is found in I</etc/services> under Unixy systems.] but here we've specified the port number (13) in parentheses. Using just the number would have also worked, but numeric literals make careful programmers nervous. =back =head2 A Webget Client Here's a simple client that takes a remote host to fetch a document from, and then a list of files to get from that host. This is a more interesting client than the previous one because it first sends something to the server before fetching the server's response. #!/usr/bin/perl use strict; use warnings; use IO::Socket; unless (@ARGV > 1) { die "usage: $0 host url ..." } my $host = shift(@ARGV); my $EOL = "\015\012"; my $BLANK = $EOL x 2; for my $document (@ARGV) { my $remote = IO::Socket::INET->new( Proto => "tcp", PeerAddr => $host, PeerPort => "http(80)", ) || die "cannot connect to httpd on $host"; $remote->autoflush(1); print $remote "GET $document HTTP/1.0" . $BLANK; while ( <$remote> ) { print } close $remote; } The web server handling the HTTP service is assumed to be at its standard port, number 80. If the server you're trying to connect to is at a different port, like 1080 or 8080, you should specify it as the named-parameter pair, C<< PeerPort => 8080 >>. The C<autoflush> method is used on the socket because otherwise the system would buffer up the output we sent it. (If you're on a prehistoric Mac, you'll also need to change every C<"\n"> in your code that sends data over the network to be a C<"\015\012"> instead.) Connecting to the server is only the first part of the process: once you have the connection, you have to use the server's language. Each server on the network has its own little command language that it expects as input. The string that we send to the server starting with "GET" is in HTTP syntax. In this case, we simply request each specified document. Yes, we really are making a new connection for each document, even though it's the same host. That's the way you always used to have to speak HTTP. Recent versions of web browsers may request that the remote server leave the connection open a little while, but the server doesn't have to honor such a request. Here's an example of running that program, which we'll call I<webget>: % webget www.perl.com /guanaco.html HTTP/1.1 404 File Not Found Date: Thu, 08 May 1997 18:02:32 GMT Server: Apache/1.2b6 Connection: close Content-type: text/html <HEAD><TITLE>404 File Not Found</TITLE></HEAD> <BODY><H1>File Not Found</H1> The requested URL /guanaco.html was not found on this server.<P> </BODY> Ok, so that's not very interesting, because it didn't find that particular document. But a long response wouldn't have fit on this page. For a more featureful version of this program, you should look to the I<lwp-request> program included with the LWP modules from CPAN. =head2 Interactive Client with IO::Socket Well, that's all fine if you want to send one command and get one answer, but what about setting up something fully interactive, somewhat like the way I<telnet> works? That way you can type a line, get the answer, type a line, get the answer, etc. This client is more complicated than the two we've done so far, but if you're on a system that supports the powerful C<fork> call, the solution isn't that rough. Once you've made the connection to whatever service you'd like to chat with, call C<fork> to clone your process. Each of these two identical process has a very simple job to do: the parent copies everything from the socket to standard output, while the child simultaneously copies everything from standard input to the socket. To accomplish the same thing using just one process would be I<much> harder, because it's easier to code two processes to do one thing than it is to code one process to do two things. (This keep-it-simple principle a cornerstones of the Unix philosophy, and good software engineering as well, which is probably why it's spread to other systems.) Here's the code: #!/usr/bin/perl use strict; use warnings; use IO::Socket; unless (@ARGV == 2) { die "usage: $0 host port" } my ($host, $port) = @ARGV; # create a tcp connection to the specified host and port my $handle = IO::Socket::INET->new(Proto => "tcp", PeerAddr => $host, PeerPort => $port) || die "can't connect to port $port on $host: $!"; $handle->autoflush(1); # so output gets there right away print STDERR "[Connected to $host:$port]\n"; # split the program into two processes, identical twins die "can't fork: $!" unless defined(my $kidpid = fork()); # the if{} block runs only in the parent process if ($kidpid) { # copy the socket to standard output while (defined (my $line = <$handle>)) { print STDOUT $line; } kill("TERM", $kidpid); # send SIGTERM to child } # the else{} block runs only in the child process else { # copy standard input to the socket while (defined (my $line = <STDIN>)) { print $handle $line; } exit(0); # just in case } The C<kill> function in the parent's C<if> block is there to send a signal to our child process, currently running in the C<else> block, as soon as the remote server has closed its end of the connection. If the remote server sends data a byte at time, and you need that data immediately without waiting for a newline (which might not happen), you may wish to replace the C<while> loop in the parent with the following: my $byte; while (sysread($handle, $byte, 1) == 1) { print STDOUT $byte; } Making a system call for each byte you want to read is not very efficient (to put it mildly) but is the simplest to explain and works reasonably well. =head1 TCP Servers with IO::Socket As always, setting up a server is little bit more involved than running a client. The model is that the server creates a special kind of socket that does nothing but listen on a particular port for incoming connections. It does this by calling the C<< IO::Socket::INET->new() >> method with slightly different arguments than the client did. =over 4 =item Proto This is which protocol to use. Like our clients, we'll still specify C<"tcp"> here. =item LocalPort We specify a local port in the C<LocalPort> argument, which we didn't do for the client. This is service name or port number for which you want to be the server. (Under Unix, ports under 1024 are restricted to the superuser.) In our sample, we'll use port 9000, but you can use any port that's not currently in use on your system. If you try to use one already in used, you'll get an "Address already in use" message. Under Unix, the C<netstat -a> command will show which services current have servers. =item Listen The C<Listen> parameter is set to the maximum number of pending connections we can accept until we turn away incoming clients. Think of it as a call-waiting queue for your telephone. The low-level Socket module has a special symbol for the system maximum, which is SOMAXCONN. =item Reuse The C<Reuse> parameter is needed so that we restart our server manually without waiting a few minutes to allow system buffers to clear out. =back Once the generic server socket has been created using the parameters listed above, the server then waits for a new client to connect to it. The server blocks in the C<accept> method, which eventually accepts a bidirectional connection from the remote client. (Make sure to autoflush this handle to circumvent buffering.) To add to user-friendliness, our server prompts the user for commands. Most servers don't do this. Because of the prompt without a newline, you'll have to use the C<sysread> variant of the interactive client above. This server accepts one of five different commands, sending output back to the client. Unlike most network servers, this one handles only one incoming client at a time. Multitasking servers are covered in Chapter 16 of the Camel. Here's the code. #!/usr/bin/perl use strict; use warnings; use IO::Socket; use Net::hostent; # for OOish version of gethostbyaddr my $PORT = 9000; # pick something not in use my $server = IO::Socket::INET->new( Proto => "tcp", LocalPort => $PORT, Listen => SOMAXCONN, Reuse => 1); die "can't setup server" unless $server; print "[Server $0 accepting clients]\n"; while (my $client = $server->accept()) { $client->autoflush(1); print $client "Welcome to $0; type help for command list.\n"; my $hostinfo = gethostbyaddr($client->peeraddr); printf "[Connect from %s]\n", $hostinfo ? $hostinfo->name : $client->peerhost; print $client "Command? "; while ( <$client>) { next unless /\S/; # blank line if (/quit|exit/i) { last } elsif (/date|time/i) { printf $client "%s\n", scalar localtime() } elsif (/who/i ) { print $client `who 2>&1` } elsif (/cookie/i ) { print $client `/usr/games/fortune 2>&1` } elsif (/motd/i ) { print $client `cat /etc/motd 2>&1` } else { print $client "Commands: quit date who cookie motd\n"; } } continue { print $client "Command? "; } close $client; } =head1 UDP: Message Passing Another kind of client-server setup is one that uses not connections, but messages. UDP communications involve much lower overhead but also provide less reliability, as there are no promises that messages will arrive at all, let alone in order and unmangled. Still, UDP offers some advantages over TCP, including being able to "broadcast" or "multicast" to a whole bunch of destination hosts at once (usually on your local subnet). If you find yourself overly concerned about reliability and start building checks into your message system, then you probably should use just TCP to start with. UDP datagrams are I<not> a bytestream and should not be treated as such. This makes using I/O mechanisms with internal buffering like stdio (i.e. print() and friends) especially cumbersome. Use syswrite(), or better send(), like in the example below. Here's a UDP program similar to the sample Internet TCP client given earlier. However, instead of checking one host at a time, the UDP version will check many of them asynchronously by simulating a multicast and then using select() to do a timed-out wait for I/O. To do something similar with TCP, you'd have to use a different socket handle for each host. #!/usr/bin/perl use strict; use warnings; use Socket; use Sys::Hostname; my $SECS_OF_70_YEARS = 2_208_988_800; my $iaddr = gethostbyname(hostname()); my $proto = getprotobyname("udp"); my $port = getservbyname("time", "udp"); my $paddr = sockaddr_in(0, $iaddr); # 0 means let kernel pick socket(my $socket, PF_INET, SOCK_DGRAM, $proto) || die "socket: $!"; bind($socket, $paddr) || die "bind: $!"; $| = 1; printf "%-12s %8s %s\n", "localhost", 0, scalar localtime(); my $count = 0; for my $host (@ARGV) { $count++; my $hisiaddr = inet_aton($host) || die "unknown host"; my $hispaddr = sockaddr_in($port, $hisiaddr); defined(send($socket, 0, 0, $hispaddr)) || die "send $host: $!"; } my $rout = my $rin = ""; vec($rin, fileno($socket), 1) = 1; # timeout after 10.0 seconds while ($count && select($rout = $rin, undef, undef, 10.0)) { my $rtime = ""; my $hispaddr = recv($socket, $rtime, 4, 0) || die "recv: $!"; my ($port, $hisiaddr) = sockaddr_in($hispaddr); my $host = gethostbyaddr($hisiaddr, AF_INET); my $histime = unpack("N", $rtime) - $SECS_OF_70_YEARS; printf "%-12s ", $host; printf "%8d %s\n", $histime - time(), scalar localtime($histime); $count--; } This example does not include any retries and may consequently fail to contact a reachable host. The most prominent reason for this is congestion of the queues on the sending host if the number of hosts to contact is sufficiently large. =head1 SysV IPC While System V IPC isn't so widely used as sockets, it still has some interesting uses. However, you cannot use SysV IPC or Berkeley mmap() to have a variable shared amongst several processes. That's because Perl would reallocate your string when you weren't wanting it to. You might look into the C<IPC::Shareable> or C<threads::shared> modules for that. Here's a small example showing shared memory usage. use IPC::SysV qw(IPC_PRIVATE IPC_RMID S_IRUSR S_IWUSR); my $size = 2000; my $id = shmget(IPC_PRIVATE, $size, S_IRUSR | S_IWUSR); defined($id) || die "shmget: $!"; print "shm key $id\n"; my $message = "Message #1"; shmwrite($id, $message, 0, 60) || die "shmwrite: $!"; print "wrote: '$message'\n"; shmread($id, my $buff, 0, 60) || die "shmread: $!"; print "read : '$buff'\n"; # the buffer of shmread is zero-character end-padded. substr($buff, index($buff, "\0")) = ""; print "un" unless $buff eq $message; print "swell\n"; print "deleting shm $id\n"; shmctl($id, IPC_RMID, 0) || die "shmctl: $!"; Here's an example of a semaphore: use IPC::SysV qw(IPC_CREAT); my $IPC_KEY = 1234; my $id = semget($IPC_KEY, 10, 0666 | IPC_CREAT); defined($id) || die "semget: $!"; print "sem id $id\n"; Put this code in a separate file to be run in more than one process. Call the file F<take>: # create a semaphore my $IPC_KEY = 1234; my $id = semget($IPC_KEY, 0, 0); defined($id) || die "semget: $!"; my $semnum = 0; my $semflag = 0; # "take" semaphore # wait for semaphore to be zero my $semop = 0; my $opstring1 = pack("s!s!s!", $semnum, $semop, $semflag); # Increment the semaphore count $semop = 1; my $opstring2 = pack("s!s!s!", $semnum, $semop, $semflag); my $opstring = $opstring1 . $opstring2; semop($id, $opstring) || die "semop: $!"; Put this code in a separate file to be run in more than one process. Call this file F<give>: # "give" the semaphore # run this in the original process and you will see # that the second process continues my $IPC_KEY = 1234; my $id = semget($IPC_KEY, 0, 0); die unless defined($id); my $semnum = 0; my $semflag = 0; # Decrement the semaphore count my $semop = -1; my $opstring = pack("s!s!s!", $semnum, $semop, $semflag); semop($id, $opstring) || die "semop: $!"; The SysV IPC code above was written long ago, and it's definitely clunky looking. For a more modern look, see the IPC::SysV module. A small example demonstrating SysV message queues: use IPC::SysV qw(IPC_PRIVATE IPC_RMID IPC_CREAT S_IRUSR S_IWUSR); my $id = msgget(IPC_PRIVATE, IPC_CREAT | S_IRUSR | S_IWUSR); defined($id) || die "msgget failed: $!"; my $sent = "message"; my $type_sent = 1234; msgsnd($id, pack("l! a*", $type_sent, $sent), 0) || die "msgsnd failed: $!"; msgrcv($id, my $rcvd_buf, 60, 0, 0) || die "msgrcv failed: $!"; my($type_rcvd, $rcvd) = unpack("l! a*", $rcvd_buf); if ($rcvd eq $sent) { print "okay\n"; } else { print "not okay\n"; } msgctl($id, IPC_RMID, 0) || die "msgctl failed: $!\n"; =head1 NOTES Most of these routines quietly but politely return C<undef> when they fail instead of causing your program to die right then and there due to an uncaught exception. (Actually, some of the new I<Socket> conversion functions do croak() on bad arguments.) It is therefore essential to check return values from these functions. Always begin your socket programs this way for optimal success, and don't forget to add the B<-T> taint-checking flag to the C<#!> line for servers: #!/usr/bin/perl -T use strict; use warnings; use sigtrap; use Socket; =head1 BUGS These routines all create system-specific portability problems. As noted elsewhere, Perl is at the mercy of your C libraries for much of its system behavior. It's probably safest to assume broken SysV semantics for signals and to stick with simple TCP and UDP socket operations; e.g., don't try to pass open file descriptors over a local UDP datagram socket if you want your code to stand a chance of being portable. =head1 AUTHOR Tom Christiansen, with occasional vestiges of Larry Wall's original version and suggestions from the Perl Porters. =head1 SEE ALSO There's a lot more to networking than this, but this should get you started. For intrepid programmers, the indispensable textbook is I<Unix Network Programming, 2nd Edition, Volume 1> by W. Richard Stevens (published by Prentice-Hall). Most books on networking address the subject from the perspective of a C programmer; translation to Perl is left as an exercise for the reader. The IO::Socket(3) manpage describes the object library, and the Socket(3) manpage describes the low-level interface to sockets. Besides the obvious functions in L<perlfunc>, you should also check out the F<modules> file at your nearest CPAN site, especially L<http://www.cpan.org/modules/00modlist.long.html#ID5_Networking_>. See L<perlmodlib> or best yet, the F<Perl FAQ> for a description of what CPAN is and where to get it if the previous link doesn't work for you. Section 5 of CPAN's F<modules> file is devoted to "Networking, Device Control (modems), and Interprocess Communication", and contains numerous unbundled modules numerous networking modules, Chat and Expect operations, CGI programming, DCE, FTP, IPC, NNTP, Proxy, Ptty, RPC, SNMP, SMTP, Telnet, Threads, and ToolTalk--to name just a few. perl5220delta.pod 0000644 00000377623 15125556335 0007571 0 ustar 00 =encoding utf8 =head1 NAME perl5220delta - what is new for perl v5.22.0 =head1 DESCRIPTION This document describes differences between the 5.20.0 release and the 5.22.0 release. If you are upgrading from an earlier release such as 5.18.0, first read L<perl5200delta>, which describes differences between 5.18.0 and 5.20.0. =head1 Core Enhancements =head2 New bitwise operators A new experimental facility has been added that makes the four standard bitwise operators (C<& | ^ ~>) treat their operands consistently as numbers, and introduces four new dotted operators (C<&. |. ^. ~.>) that treat their operands consistently as strings. The same applies to the assignment variants (C<&= |= ^= &.= |.= ^.=>). To use this, enable the "bitwise" feature and disable the "experimental::bitwise" warnings category. See L<perlop/Bitwise String Operators> for details. L<[perl #123466]|https://rt.perl.org/Ticket/Display.html?id=123466>. =head2 New double-diamond operator C<<< <<>> >>> is like C<< <> >> but uses three-argument C<open> to open each file in C<@ARGV>. This means that each element of C<@ARGV> will be treated as an actual file name, and C<"|foo"> won't be treated as a pipe open. =head2 New C<\b> boundaries in regular expressions =head3 C<qr/\b{gcb}/> C<gcb> stands for Grapheme Cluster Boundary. It is a Unicode property that finds the boundary between sequences of characters that look like a single character to a native speaker of a language. Perl has long had the ability to deal with these through the C<\X> regular escape sequence. Now, there is an alternative way of handling these. See L<perlrebackslash/\b{}, \b, \B{}, \B> for details. =head3 C<qr/\b{wb}/> C<wb> stands for Word Boundary. It is a Unicode property that finds the boundary between words. This is similar to the plain C<\b> (without braces) but is more suitable for natural language processing. It knows, for example, that apostrophes can occur in the middle of words. See L<perlrebackslash/\b{}, \b, \B{}, \B> for details. =head3 C<qr/\b{sb}/> C<sb> stands for Sentence Boundary. It is a Unicode property to aid in parsing natural language sentences. See L<perlrebackslash/\b{}, \b, \B{}, \B> for details. =head2 Non-Capturing Regular Expression Flag Regular expressions now support a C</n> flag that disables capturing and filling in C<$1>, C<$2>, etc inside of groups: "hello" =~ /(hi|hello)/n; # $1 is not set This is equivalent to putting C<?:> at the beginning of every capturing group. See L<perlre/"n"> for more information. =head2 C<use re 'strict'> This applies stricter syntax rules to regular expression patterns compiled within its scope. This will hopefully alert you to typos and other unintentional behavior that backwards-compatibility issues prevent us from reporting in normal regular expression compilations. Because the behavior of this is subject to change in future Perl releases as we gain experience, using this pragma will raise a warning of category C<experimental::re_strict>. See L<'strict' in re|re/'strict' mode>. =head2 Unicode 7.0 (with correction) is now supported For details on what is in this release, see L<http://www.unicode.org/versions/Unicode7.0.0/>. The version of Unicode 7.0 that comes with Perl includes a correction dealing with glyph shaping in Arabic (see L<http://www.unicode.org/errata/#current_errata>). =head2 S<C<use locale>> can restrict which locale categories are affected It is now possible to pass a parameter to S<C<use locale>> to specify a subset of locale categories to be locale-aware, with the remaining ones unaffected. See L<perllocale/The "use locale" pragma> for details. =head2 Perl now supports POSIX 2008 locale currency additions On platforms that are able to handle POSIX.1-2008, the hash returned by L<C<POSIX::localeconv()>|perllocale/The localeconv function> includes the international currency fields added by that version of the POSIX standard. These are C<int_n_cs_precedes>, C<int_n_sep_by_space>, C<int_n_sign_posn>, C<int_p_cs_precedes>, C<int_p_sep_by_space>, and C<int_p_sign_posn>. =head2 Better heuristics on older platforms for determining locale UTF-8ness On platforms that implement neither the C99 standard nor the POSIX 2001 standard, determining if the current locale is UTF-8 or not depends on heuristics. These are improved in this release. =head2 Aliasing via reference Variables and subroutines can now be aliased by assigning to a reference: \$c = \$d; \&x = \&y; Aliasing can also be accomplished by using a backslash before a C<foreach> iterator variable; this is perhaps the most useful idiom this feature provides: foreach \%hash (@array_of_hash_refs) { ... } This feature is experimental and must be enabled via S<C<use feature 'refaliasing'>>. It will warn unless the C<experimental::refaliasing> warnings category is disabled. See L<perlref/Assigning to References> =head2 C<prototype> with no arguments C<prototype()> with no arguments now infers C<$_>. L<[perl #123514]|https://rt.perl.org/Ticket/Display.html?id=123514>. =head2 New C<:const> subroutine attribute The C<const> attribute can be applied to an anonymous subroutine. It causes the new sub to be executed immediately whenever one is created (I<i.e.> when the C<sub> expression is evaluated). Its value is captured and used to create a new constant subroutine that is returned. This feature is experimental. See L<perlsub/Constant Functions>. =head2 C<fileno> now works on directory handles When the relevant support is available in the operating system, the C<fileno> builtin now works on directory handles, yielding the underlying file descriptor in the same way as for filehandles. On operating systems without such support, C<fileno> on a directory handle continues to return the undefined value, as before, but also sets C<$!> to indicate that the operation is not supported. Currently, this uses either a C<dd_fd> member in the OS C<DIR> structure, or a C<dirfd(3)> function as specified by POSIX.1-2008. =head2 List form of pipe open implemented for Win32 The list form of pipe: open my $fh, "-|", "program", @arguments; is now implemented on Win32. It has the same limitations as C<system LIST> on Win32, since the Win32 API doesn't accept program arguments as a list. =head2 Assignment to list repetition C<(...) x ...> can now be used within a list that is assigned to, as long as the left-hand side is a valid lvalue. This allows S<C<(undef,undef,$foo) = that_function()>> to be written as S<C<((undef)x2, $foo) = that_function()>>. =head2 Infinity and NaN (not-a-number) handling improved Floating point values are able to hold the special values infinity, negative infinity, and NaN (not-a-number). Now we more robustly recognize and propagate the value in computations, and on output normalize them to the strings C<Inf>, C<-Inf>, and C<NaN>. See also the L<POSIX> enhancements. =head2 Floating point parsing has been improved Parsing and printing of floating point values has been improved. As a completely new feature, hexadecimal floating point literals (like C<0x1.23p-4>) are now supported, and they can be output with S<C<printf "%a">>. See L<perldata/Scalar value constructors> for more details. =head2 Packing infinity or not-a-number into a character is now fatal Before, when trying to pack infinity or not-a-number into a (signed) character, Perl would warn, and assumed you tried to pack C<< 0xFF >>; if you gave it as an argument to C<< chr >>, C<< U+FFFD >> was returned. But now, all such actions (C<< pack >>, C<< chr >>, and C<< print '%c' >>) result in a fatal error. =head2 Experimental C Backtrace API Perl now supports (via a C level API) retrieving the C level backtrace (similar to what symbolic debuggers like gdb do). The backtrace returns the stack trace of the C call frames, with the symbol names (function names), the object names (like "perl"), and if it can, also the source code locations (file:line). The supported platforms are Linux and OS X (some *BSD might work at least partly, but they have not yet been tested). The feature needs to be enabled with C<Configure -Dusecbacktrace>. See L<perlhacktips/"C backtrace"> for more information. =head1 Security =head2 Perl is now compiled with C<-fstack-protector-strong> if available Perl has been compiled with the anti-stack-smashing option C<-fstack-protector> since 5.10.1. Now Perl uses the newer variant called C<-fstack-protector-strong>, if available. =head2 The L<Safe> module could allow outside packages to be replaced Critical bugfix: outside packages could be replaced. L<Safe> has been patched to 2.38 to address this. =head2 Perl is now always compiled with C<-D_FORTIFY_SOURCE=2> if available The 'code hardening' option called C<_FORTIFY_SOURCE>, available in gcc 4.*, is now always used for compiling Perl, if available. Note that this isn't necessarily a huge step since in many platforms the step had already been taken several years ago: many Linux distributions (like Fedora) have been using this option for Perl, and OS X has enforced the same for many years. =head1 Incompatible Changes =head2 Subroutine signatures moved before attributes The experimental sub signatures feature, as introduced in 5.20, parsed signatures after attributes. In this release, following feedback from users of the experimental feature, the positioning has been moved such that signatures occur after the subroutine name (if any) and before the attribute list (if any). =head2 C<&> and C<\&> prototypes accepts only subs The C<&> prototype character now accepts only anonymous subs (C<sub {...}>), things beginning with C<\&>, or an explicit C<undef>. Formerly it erroneously also allowed references to arrays, hashes, and lists. L<[perl #4539]|https://rt.perl.org/Ticket/Display.html?id=4539>. L<[perl #123062]|https://rt.perl.org/Ticket/Display.html?id=123062>. L<[perl #123062]|https://rt.perl.org/Ticket/Display.html?id=123475>. In addition, the C<\&> prototype was allowing subroutine calls, whereas now it only allows subroutines: C<&foo> is still permitted as an argument, while C<&foo()> and C<foo()> no longer are. L<[perl #77860]|https://rt.perl.org/Ticket/Display.html?id=77860>. =head2 C<use encoding> is now lexical The L<encoding> pragma's effect is now limited to lexical scope. This pragma is deprecated, but in the meantime, it could adversely affect unrelated modules that are included in the same program; this change fixes that. =head2 List slices returning empty lists List slices now return an empty list only if the original list was empty (or if there are no indices). Formerly, a list slice would return an empty list if all indices fell outside the original list; now it returns a list of C<undef> values in that case. L<[perl #114498]|https://rt.perl.org/Ticket/Display.html?id=114498>. =head2 C<\N{}> with a sequence of multiple spaces is now a fatal error E.g. S<C<\N{TOOE<nbsp>E<nbsp>MANY SPACES}>> or S<C<\N{TRAILING SPACE }>>. This has been deprecated since v5.18. =head2 S<C<use UNIVERSAL '...'>> is now a fatal error Importing functions from C<UNIVERSAL> has been deprecated since v5.12, and is now a fatal error. S<C<use UNIVERSAL>> without any arguments is still allowed. =head2 In double-quotish C<\cI<X>>, I<X> must now be a printable ASCII character In prior releases, failure to do this raised a deprecation warning. =head2 Splitting the tokens C<(?> and C<(*> in regular expressions is now a fatal compilation error. These had been deprecated since v5.18. =head2 C<qr/foo/x> now ignores all Unicode pattern white space The C</x> regular expression modifier allows the pattern to contain white space and comments (both of which are ignored) for improved readability. Until now, not all the white space characters that Unicode designates for this purpose were handled. The additional ones now recognized are: U+0085 NEXT LINE U+200E LEFT-TO-RIGHT MARK U+200F RIGHT-TO-LEFT MARK U+2028 LINE SEPARATOR U+2029 PARAGRAPH SEPARATOR The use of these characters with C</x> outside bracketed character classes and when not preceded by a backslash has raised a deprecation warning since v5.18. Now they will be ignored. =head2 Comment lines within S<C<(?[ ])>> are now ended only by a C<\n> S<C<(?[ ])>> is an experimental feature, introduced in v5.18. It operates as if C</x> is always enabled. But there was a difference: comment lines (following a C<#> character) were terminated by anything matching C<\R> which includes all vertical whitespace, such as form feeds. For consistency, this is now changed to match what terminates comment lines outside S<C<(?[ ])>>, namely a C<\n> (even if escaped), which is the same as what terminates a heredoc string and formats. =head2 C<(?[...])> operators now follow standard Perl precedence This experimental feature allows set operations in regular expression patterns. Prior to this, the intersection operator had the same precedence as the other binary operators. Now it has higher precedence. This could lead to different outcomes than existing code expects (though the documentation has always noted that this change might happen, recommending fully parenthesizing the expressions). See L<perlrecharclass/Extended Bracketed Character Classes>. =head2 Omitting C<%> and C<@> on hash and array names is no longer permitted Really old Perl let you omit the C<@> on array names and the C<%> on hash names in some spots. This has issued a deprecation warning since Perl 5.000, and is no longer permitted. =head2 C<"$!"> text is now in English outside the scope of C<use locale> Previously, the text, unlike almost everything else, always came out based on the current underlying locale of the program. (Also affected on some systems is C<"$^E">.) For programs that are unprepared to handle locale differences, this can cause garbage text to be displayed. It's better to display text that is translatable via some tool than garbage text which is much harder to figure out. =head2 C<"$!"> text will be returned in UTF-8 when appropriate The stringification of C<$!> and C<$^E> will have the UTF-8 flag set when the text is actually non-ASCII UTF-8. This will enable programs that are set up to be locale-aware to properly output messages in the user's native language. Code that needs to continue the 5.20 and earlier behavior can do the stringification within the scopes of both S<C<use bytes>> and S<C<use locale ":messages">>. Within these two scopes, no other Perl operations will be affected by locale; only C<$!> and C<$^E> stringification. The C<bytes> pragma causes the UTF-8 flag to not be set, just as in previous Perl releases. This resolves L<[perl #112208]|https://rt.perl.org/Ticket/Display.html?id=112208>. =head2 Support for C<?PATTERN?> without explicit operator has been removed The C<m?PATTERN?> construct, which allows matching a regex only once, previously had an alternative form that was written directly with a question mark delimiter, omitting the explicit C<m> operator. This usage has produced a deprecation warning since 5.14.0. It is now a syntax error, so that the question mark can be available for use in new operators. =head2 C<defined(@array)> and C<defined(%hash)> are now fatal errors These have been deprecated since v5.6.1 and have raised deprecation warnings since v5.16. =head2 Using a hash or an array as a reference are now fatal errors For example, C<< %foo->{"bar"} >> now causes a fatal compilation error. These have been deprecated since before v5.8, and have raised deprecation warnings since then. =head2 Changes to the C<*> prototype The C<*> character in a subroutine's prototype used to allow barewords to take precedence over most, but not all, subroutine names. It was never consistent and exhibited buggy behavior. Now it has been changed, so subroutines always take precedence over barewords, which brings it into conformity with similarly prototyped built-in functions: sub splat(*) { ... } sub foo { ... } splat(foo); # now always splat(foo()) splat(bar); # still splat('bar') as before close(foo); # close(foo()) close(bar); # close('bar') =head1 Deprecations =head2 Setting C<${^ENCODING}> to anything but C<undef> This variable allows Perl scripts to be written in an encoding other than ASCII or UTF-8. However, it affects all modules globally, leading to wrong answers and segmentation faults. New scripts should be written in UTF-8; old scripts should be converted to UTF-8, which is easily done with the L<piconv> utility. =head2 Use of non-graphic characters in single-character variable names The syntax for single-character variable names is more lenient than for longer variable names, allowing the one-character name to be a punctuation character or even invisible (a non-graphic). Perl v5.20 deprecated the ASCII-range controls as such a name. Now, all non-graphic characters that formerly were allowed are deprecated. The practical effect of this occurs only when not under C<S<use utf8>>, and affects just the C1 controls (code points 0x80 through 0xFF), NO-BREAK SPACE, and SOFT HYPHEN. =head2 Inlining of C<sub () { $var }> with observable side-effects In many cases Perl makes S<C<sub () { $var }>> into an inlinable constant subroutine, capturing the value of C<$var> at the time the C<sub> expression is evaluated. This can break the closure behavior in those cases where C<$var> is subsequently modified, since the subroutine won't return the changed value. (Note that this all only applies to anonymous subroutines with an empty prototype (S<C<sub ()>>).) This usage is now deprecated in those cases where the variable could be modified elsewhere. Perl detects those cases and emits a deprecation warning. Such code will likely change in the future and stop producing a constant. If your variable is only modified in the place where it is declared, then Perl will continue to make the sub inlinable with no warnings. sub make_constant { my $var = shift; return sub () { $var }; # fine } sub make_constant_deprecated { my $var; $var = shift; return sub () { $var }; # deprecated } sub make_constant_deprecated2 { my $var = shift; log_that_value($var); # could modify $var return sub () { $var }; # deprecated } In the second example above, detecting that C<$var> is assigned to only once is too hard to detect. That it happens in a spot other than the C<my> declaration is enough for Perl to find it suspicious. This deprecation warning happens only for a simple variable for the body of the sub. (A C<BEGIN> block or C<use> statement inside the sub is ignored, because it does not become part of the sub's body.) For more complex cases, such as S<C<sub () { do_something() if 0; $var }>> the behavior has changed such that inlining does not happen if the variable is modifiable elsewhere. Such cases should be rare. =head2 Use of multiple C</x> regexp modifiers It is now deprecated to say something like any of the following: qr/foo/xx; /(?xax:foo)/; use re qw(/amxx); That is, now C<x> should only occur once in any string of contiguous regular expression pattern modifiers. We do not believe there are any occurrences of this in all of CPAN. This is in preparation for a future Perl release having C</xx> permit white-space for readability in bracketed character classes (those enclosed in square brackets: C<[...]>). =head2 Using a NO-BREAK space in a character alias for C<\N{...}> is now deprecated This non-graphic character is essentially indistinguishable from a regular space, and so should not be allowed. See L<charnames/CUSTOM ALIASES>. =head2 A literal C<"{"> should now be escaped in a pattern If you want a literal left curly bracket (also called a left brace) in a regular expression pattern, you should now escape it by either preceding it with a backslash (C<"\{">) or enclosing it within square brackets C<"[{]">, or by using C<\Q>; otherwise a deprecation warning will be raised. This was first announced as forthcoming in the v5.16 release; it will allow future extensions to the language to happen. =head2 Making all warnings fatal is discouraged The documentation for L<fatal warnings|warnings/Fatal Warnings> notes that C<< use warnings FATAL => 'all' >> is discouraged, and provides stronger language about the risks of fatal warnings in general. =head1 Performance Enhancements =over 4 =item * If a method or class name is known at compile time, a hash is precomputed to speed up run-time method lookup. Also, compound method names like C<SUPER::new> are parsed at compile time, to save having to parse them at run time. =item * Array and hash lookups (especially nested ones) that use only constants or simple variables as keys, are now considerably faster. See L</Internal Changes> for more details. =item * C<(...)x1>, C<("constant")x0> and C<($scalar)x0> are now optimised in list context. If the right-hand argument is a constant 1, the repetition operator disappears. If the right-hand argument is a constant 0, the whole expression is optimised to the empty list, so long as the left-hand argument is a simple scalar or constant. (That is, C<(foo())x0> is not subject to this optimisation.) =item * C<substr> assignment is now optimised into 4-argument C<substr> at the end of a subroutine (or as the argument to C<return>). Previously, this optimisation only happened in void context. =item * In C<"\L...">, C<"\Q...">, etc., the extra "stringify" op is now optimised away, making these just as fast as C<lcfirst>, C<quotemeta>, etc. =item * Assignment to an empty list is now sometimes faster. In particular, it never calls C<FETCH> on tied arguments on the right-hand side, whereas it used to sometimes. =item * There is a performance improvement of up to 20% when C<length> is applied to a non-magical, non-tied string, and either C<use bytes> is in scope or the string doesn't use UTF-8 internally. =item * On most perl builds with 64-bit integers, memory usage for non-magical, non-tied scalars containing only a floating point value has been reduced by between 8 and 32 bytes, depending on OS. =item * In C<@array = split>, the assignment can be optimized away, so that C<split> writes directly to the array. This optimisation was happening only for package arrays other than C<@_>, and only sometimes. Now this optimisation happens almost all the time. =item * C<join> is now subject to constant folding. So for example S<C<join "-", "a", "b">> is converted at compile-time to C<"a-b">. Moreover, C<join> with a scalar or constant for the separator and a single-item list to join is simplified to a stringification, and the separator doesn't even get evaluated. =item * C<qq(@array)> is implemented using two ops: a stringify op and a join op. If the C<qq> contains nothing but a single array, the stringification is optimized away. =item * S<C<our $var>> and S<C<our($s,@a,%h)>> in void context are no longer evaluated at run time. Even a whole sequence of S<C<our $foo;>> statements will simply be skipped over. The same applies to C<state> variables. =item * Many internal functions have been refactored to improve performance and reduce their memory footprints. L<[perl #121436]|https://rt.perl.org/Ticket/Display.html?id=121436> L<[perl #121906]|https://rt.perl.org/Ticket/Display.html?id=121906> L<[perl #121969]|https://rt.perl.org/Ticket/Display.html?id=121969> =item * C<-T> and C<-B> filetests will return sooner when an empty file is detected. L<[perl #121489]|https://rt.perl.org/Ticket/Display.html?id=121489> =item * Hash lookups where the key is a constant are faster. =item * Subroutines with an empty prototype and a body containing just C<undef> are now eligible for inlining. L<[perl #122728]|https://rt.perl.org/Ticket/Display.html?id=122728> =item * Subroutines in packages no longer need to be stored in typeglobs: declaring a subroutine will now put a simple sub reference directly in the stash if possible, saving memory. The typeglob still notionally exists, so accessing it will cause the stash entry to be upgraded to a typeglob (I<i.e.> this is just an internal implementation detail). This optimization does not currently apply to XSUBs or exported subroutines, and method calls will undo it, since they cache things in typeglobs. L<[perl #120441]|https://rt.perl.org/Ticket/Display.html?id=120441> =item * The functions C<utf8::native_to_unicode()> and C<utf8::unicode_to_native()> (see L<utf8>) are now optimized out on ASCII platforms. There is now not even a minimal performance hit in writing code portable between ASCII and EBCDIC platforms. =item * Win32 Perl uses 8 KB less of per-process memory than before for every perl process, because some data is now memory mapped from disk and shared between processes from the same perl binary. =back =head1 Modules and Pragmata =head2 Updated Modules and Pragmata Many of the libraries distributed with perl have been upgraded since v5.20.0. For a complete list of changes, run: corelist --diff 5.20.0 5.22.0 You can substitute your favorite version in place of 5.20.0, too. Some notable changes include: =over 4 =item * L<Archive::Tar> has been upgraded to version 2.04. Tests can now be run in parallel. =item * L<attributes> has been upgraded to version 0.27. The usage of C<memEQs> in the XS has been corrected. L<[perl #122701]|https://rt.perl.org/Ticket/Display.html?id=122701> Avoid reading beyond the end of a buffer. [perl #122629] =item * L<B> has been upgraded to version 1.58. It provides a new C<B::safename> function, based on the existing C<< B::GV->SAFENAME >>, that converts C<\cOPEN> to C<^OPEN>. Nulled COPs are now of class C<B::COP>, rather than C<B::OP>. C<B::REGEXP> objects now provide a C<qr_anoncv> method for accessing the implicit CV associated with C<qr//> things containing code blocks, and a C<compflags> method that returns the pertinent flags originating from the C<qr//blahblah> op. C<B::PMOP> now provides a C<pmregexp> method returning a C<B::REGEXP> object. Two new classes, C<B::PADNAME> and C<B::PADNAMELIST>, have been introduced. A bug where, after an ithread creation or psuedofork, special/immortal SVs in the child ithread/psuedoprocess did not have the correct class of C<B::SPECIAL>, has been fixed. The C<id> and C<outid> PADLIST methods have been added. =item * L<B::Concise> has been upgraded to version 0.996. Null ops that are part of the execution chain are now given sequence numbers. Private flags for nulled ops are now dumped with mnemonics as they would be for the non-nulled counterparts. =item * L<B::Deparse> has been upgraded to version 1.35. It now deparses C<+sub : attr { ... }> correctly at the start of a statement. Without the initial C<+>, C<sub> would be a statement label. C<BEGIN> blocks are now emitted in the right place most of the time, but the change unfortunately introduced a regression, in that C<BEGIN> blocks occurring just before the end of the enclosing block may appear below it instead. C<B::Deparse> no longer puts erroneous C<local> here and there, such as for C<LIST = tr/a//d>. [perl #119815] Adjacent C<use> statements are no longer accidentally nested if one contains a C<do> block. [perl #115066] Parenthesised arrays in lists passed to C<\> are now correctly deparsed with parentheses (I<e.g.>, C<\(@a, (@b), @c)> now retains the parentheses around @b), thus preserving the flattening behavior of referenced parenthesised arrays. Formerly, it only worked for one array: C<\(@a)>. C<local our> is now deparsed correctly, with the C<our> included. C<for($foo; !$bar; $baz) {...}> was deparsed without the C<!> (or C<not>). This has been fixed. Core keywords that conflict with lexical subroutines are now deparsed with the C<CORE::> prefix. C<foreach state $x (...) {...}> now deparses correctly with C<state> and not C<my>. C<our @array = split(...)> now deparses correctly with C<our> in those cases where the assignment is optimized away. It now deparses C<our(I<LIST>)> and typed lexical (C<my Dog $spot>) correctly. Deparse C<$#_> as that instead of as C<$#{_}>. L<[perl #123947]|https://rt.perl.org/Ticket/Display.html?id=123947> BEGIN blocks at the end of the enclosing scope are now deparsed in the right place. [perl #77452] BEGIN blocks were sometimes deparsed as __ANON__, but are now always called BEGIN. Lexical subroutines are now fully deparsed. [perl #116553] C<Anything =~ y///r> with C</r> no longer omits the left-hand operand. The op trees that make up regexp code blocks are now deparsed for real. Formerly, the original string that made up the regular expression was used. That caused problems with C<qr/(?{E<lt>E<lt>heredoc})/> and multiline code blocks, which were deparsed incorrectly. [perl #123217] [perl #115256] C<$;> at the end of a statement no longer loses its semicolon. [perl #123357] Some cases of subroutine declarations stored in the stash in shorthand form were being omitted. Non-ASCII characters are now consistently escaped in strings, instead of some of the time. (There are still outstanding problems with regular expressions and identifiers that have not been fixed.) When prototype sub calls are deparsed with C<&> (I<e.g.>, under the B<-P> option), C<scalar> is now added where appropriate, to force the scalar context implied by the prototype. C<require(foo())>, C<do(foo())>, C<goto(foo())> and similar constructs with loop controls are now deparsed correctly. The outer parentheses are not optional. Whitespace is no longer escaped in regular expressions, because it was getting erroneously escaped within C<(?x:...)> sections. C<sub foo { foo() }> is now deparsed with those mandatory parentheses. C</@array/> is now deparsed as a regular expression, and not just C<@array>. C</@{-}/>, C</@{+}/> and C<$#{1}> are now deparsed with the braces, which are mandatory in these cases. In deparsing feature bundles, C<B::Deparse> was emitting C<no feature;> first instead of C<no feature ':all';>. This has been fixed. C<chdir FH> is now deparsed without quotation marks. C<\my @a> is now deparsed without parentheses. (Parenthese would flatten the array.) C<system> and C<exec> followed by a block are now deparsed correctly. Formerly there was an erroneous C<do> before the block. C<< use constant QR =E<gt> qr/.../flags >> followed by C<"" =~ QR> is no longer without the flags. Deparsing C<BEGIN { undef &foo }> with the B<-w> switch enabled started to emit 'uninitialized' warnings in Perl 5.14. This has been fixed. Deparsing calls to subs with a C<(;+)> prototype resulted in an infinite loop. The C<(;$>) C<(_)> and C<(;_)> prototypes were given the wrong precedence, causing C<foo($aE<lt>$b)> to be deparsed without the parentheses. Deparse now provides a defined state sub in inner subs. =item * L<B::Op_private> has been added. L<B::Op_private> provides detailed information about the flags used in the C<op_private> field of perl opcodes. =item * L<bigint>, L<bignum>, L<bigrat> have been upgraded to version 0.39. Document in CAVEATS that using strings as numbers won't always invoke the big number overloading, and how to invoke it. [rt.perl.org #123064] =item * L<Carp> has been upgraded to version 1.36. C<Carp::Heavy> now ignores version mismatches with Carp if Carp is newer than 1.12, since C<Carp::Heavy>'s guts were merged into Carp at that point. L<[perl #121574]|https://rt.perl.org/Ticket/Display.html?id=121574> Carp now handles non-ASCII platforms better. Off-by-one error fix for Perl E<lt> 5.14. =item * L<constant> has been upgraded to version 1.33. It now accepts fully-qualified constant names, allowing constants to be defined in packages other than the caller. =item * L<CPAN> has been upgraded to version 2.11. Add support for C<Cwd::getdcwd()> and introduce workaround for a misbehavior seen on Strawberry Perl 5.20.1. Fix C<chdir()> after building dependencies bug. Introduce experimental support for plugins/hooks. Integrate the C<App::Cpan> sources. Do not check recursion on optional dependencies. Sanity check F<META.yml> to contain a hash. L<[cpan #95271]|https://rt.cpan.org/Ticket/Display.html?id=95271> =item * L<CPAN::Meta::Requirements> has been upgraded to version 2.132. Works around limitations in C<version::vpp> detecting v-string magic and adds support for forthcoming L<ExtUtils::MakeMaker> bootstrap F<version.pm> for Perls older than 5.10.0. =item * L<Data::Dumper> has been upgraded to version 2.158. Fixes CVE-2014-4330 by adding a configuration variable/option to limit recursion when dumping deep data structures. Changes to resolve Coverity issues. XS dumps incorrectly stored the name of code references stored in a GLOB. L<[perl #122070]|https://rt.perl.org/Ticket/Display.html?id=122070> =item * L<DynaLoader> has been upgraded to version 1.32. Remove C<dl_nonlazy> global if unused in Dynaloader. [perl #122926] =item * L<Encode> has been upgraded to version 2.72. C<piconv> now has better error handling when the encoding name is nonexistent, and a build breakage when upgrading L<Encode> in perl-5.8.2 and earlier has been fixed. Building in C++ mode on Windows now works. =item * L<Errno> has been upgraded to version 1.23. Add C<-P> to the preprocessor command-line on GCC 5. GCC added extra line directives, breaking parsing of error code definitions. [rt.perl.org #123784] =item * L<experimental> has been upgraded to version 0.013. Hardcodes features for Perls older than 5.15.7. =item * L<ExtUtils::CBuilder> has been upgraded to version 0.280221. Fixes a regression on Android. L<[perl #122675]|https://rt.perl.org/Ticket/Display.html?id=122675> =item * L<ExtUtils::Manifest> has been upgraded to version 1.70. Fixes a bug with C<maniread()>'s handling of quoted filenames and improves C<manifind()> to follow symlinks. L<[perl #122415]|https://rt.perl.org/Ticket/Display.html?id=122415> =item * L<ExtUtils::ParseXS> has been upgraded to version 3.28. Only declare C<file> unused if we actually define it. Improve generated C<RETVAL> code generation to avoid repeated references to C<ST(0)>. [perl #123278] Broaden and document the C</OBJ$/> to C</REF$/> typemap optimization for the C<DESTROY> method. [perl #123418] =item * L<Fcntl> has been upgraded to version 1.13. Add support for the Linux pipe buffer size C<fcntl()> commands. =item * L<File::Find> has been upgraded to version 1.29. C<find()> and C<finddepth()> will now warn if passed inappropriate or misspelled options. =item * L<File::Glob> has been upgraded to version 1.24. Avoid C<SvIV()> expanding to call C<get_sv()> three times in a few places. [perl #123606] =item * L<HTTP::Tiny> has been upgraded to version 0.054. C<keep_alive> is now fork-safe and thread-safe. =item * L<IO> has been upgraded to version 1.35. The XS implementation has been fixed for the sake of older Perls. =item * L<IO::Socket> has been upgraded to version 1.38. Document the limitations of the C<connected()> method. [perl #123096] =item * L<IO::Socket::IP> has been upgraded to version 0.37. A better fix for subclassing C<connect()>. L<[cpan #95983]|https://rt.cpan.org/Ticket/Display.html?id=95983> L<[cpan #97050]|https://rt.cpan.org/Ticket/Display.html?id=97050> Implements Timeout for C<connect()>. L<[cpan #92075]|https://rt.cpan.org/Ticket/Display.html?id=92075> =item * The libnet collection of modules has been upgraded to version 3.05. Support for IPv6 and SSL to C<Net::FTP>, C<Net::NNTP>, C<Net::POP3> and C<Net::SMTP>. Improvements in C<Net::SMTP> authentication. =item * L<Locale::Codes> has been upgraded to version 3.34. Fixed a bug in the scripts used to extract data from spreadsheets that prevented the SHP currency code from being found. L<[cpan #94229]|https://rt.cpan.org/Ticket/Display.html?id=94229> New codes have been added. =item * L<Math::BigInt> has been upgraded to version 1.9997. Synchronize POD changes from the CPAN release. C<< Math::BigFloat->blog(x) >> would sometimes return C<blog(2*x)> when the accuracy was greater than 70 digits. The result of C<< Math::BigFloat->bdiv() >> in list context now satisfies C<< x = quotient * divisor + remainder >>. Correct handling of subclasses. L<[cpan #96254]|https://rt.cpan.org/Ticket/Display.html?id=96254> L<[cpan #96329]|https://rt.cpan.org/Ticket/Display.html?id=96329> =item * L<Module::Metadata> has been upgraded to version 1.000026. Support installations on older perls with an L<ExtUtils::MakeMaker> earlier than 6.63_03 =item * L<overload> has been upgraded to version 1.26. A redundant C<ref $sub> check has been removed. =item * The PathTools module collection has been upgraded to version 3.56. A warning from the B<gcc> compiler is now avoided when building the XS. Don't turn leading C<//> into C</> on Cygwin. [perl #122635] =item * L<perl5db.pl> has been upgraded to version 1.49. The debugger would cause an assertion failure. L<[perl #124127]|https://rt.perl.org/Ticket/Display.html?id=124127> C<fork()> in the debugger under C<tmux> will now create a new window for the forked process. L<[perl #121333]|https://rt.perl.org/Ticket/Display.html?id=121333> The debugger now saves the current working directory on startup and restores it when you restart your program with C<R> or C<rerun>. L<[perl #121509]|https://rt.perl.org/Ticket/Display.html?id=121509> =item * L<PerlIO::scalar> has been upgraded to version 0.22. Reading from a position well past the end of the scalar now correctly returns end of file. [perl #123443] Seeking to a negative position still fails, but no longer leaves the file position set to a negation location. C<eof()> on a C<PerlIO::scalar> handle now properly returns true when the file position is past the 2GB mark on 32-bit systems. Attempting to write at file positions impossible for the platform now fail early rather than wrapping at 4GB. =item * L<Pod::Perldoc> has been upgraded to version 3.25. Filehandles opened for reading or writing now have C<:encoding(UTF-8)> set. L<[cpan #98019]|https://rt.cpan.org/Ticket/Display.html?id=98019> =item * L<POSIX> has been upgraded to version 1.53. The C99 math functions and constants (for example C<acosh>, C<isinf>, C<isnan>, C<round>, C<trunc>; C<M_E>, C<M_SQRT2>, C<M_PI>) have been added. C<POSIX::tmpnam()> now produces a deprecation warning. [perl #122005] =item * L<Safe> has been upgraded to version 2.39. C<reval> was not propagating void context properly. =item * Scalar-List-Utils has been upgraded to version 1.41. A new module, L<Sub::Util>, has been added, containing functions related to CODE refs, including C<subname> (inspired by C<Sub::Identity>) and C<set_subname> (copied and renamed from C<Sub::Name>). The use of C<GetMagic> in C<List::Util::reduce()> has also been fixed. L<[cpan #63211]|https://rt.cpan.org/Ticket/Display.html?id=63211> =item * L<SDBM_File> has been upgraded to version 1.13. Simplified the build process. [perl #123413] =item * L<Time::Piece> has been upgraded to version 1.29. When pretty printing negative C<Time::Seconds>, the "minus" is no longer lost. =item * L<Unicode::Collate> has been upgraded to version 1.12. Version 0.67's improved discontiguous contractions is invalidated by default and is supported as a parameter C<long_contraction>. =item * L<Unicode::Normalize> has been upgraded to version 1.18. The XSUB implementation has been removed in favor of pure Perl. =item * L<Unicode::UCD> has been upgraded to version 0.61. A new function L<property_values()|Unicode::UCD/prop_values()> has been added to return a given property's possible values. A new function L<charprop()|Unicode::UCD/charprop()> has been added to return the value of a given property for a given code point. A new function L<charprops_all()|Unicode::UCD/charprops_all()> has been added to return the values of all Unicode properties for a given code point. A bug has been fixed so that L<propaliases()|Unicode::UCD/prop_aliases()> returns the correct short and long names for the Perl extensions where it was incorrect. A bug has been fixed so that L<prop_value_aliases()|Unicode::UCD/prop_value_aliases()> returns C<undef> instead of a wrong result for properties that are Perl extensions. This module now works on EBCDIC platforms. =item * L<utf8> has been upgraded to version 1.17 A mismatch between the documentation and the code in C<utf8::downgrade()> was fixed in favor of the documentation. The optional second argument is now correctly treated as a perl boolean (true/false semantics) and not as an integer. =item * L<version> has been upgraded to version 0.9909. Numerous changes. See the F<Changes> file in the CPAN distribution for details. =item * L<Win32> has been upgraded to version 0.51. C<GetOSName()> now supports Windows 8.1, and building in C++ mode now works. =item * L<Win32API::File> has been upgraded to version 0.1202 Building in C++ mode now works. =item * L<XSLoader> has been upgraded to version 0.20. Allow XSLoader to load modules from a different namespace. [perl #122455] =back =head2 Removed Modules and Pragmata The following modules (and associated modules) have been removed from the core perl distribution: =over 4 =item * L<CGI> =item * L<Module::Build> =back =head1 Documentation =head2 New Documentation =head3 L<perlunicook> This document, by Tom Christiansen, provides examples of handling Unicode in Perl. =head2 Changes to Existing Documentation =head3 L<perlaix> =over 4 =item * A note on long doubles has been added. =back =head3 L<perlapi> =over 4 =item * Note that C<SvSetSV> doesn't do set magic. =item * C<sv_usepvn_flags> - fix documentation to mention the use of C<Newx> instead of C<malloc>. L<[perl #121869]|https://rt.perl.org/Ticket/Display.html?id=121869> =item * Clarify where C<NUL> may be embedded or is required to terminate a string. =item * Some documentation that was previously missing due to formatting errors is now included. =item * Entries are now organized into groups rather than by the file where they are found. =item * Alphabetical sorting of entries is now done consistently (automatically by the POD generator) to make entries easier to find when scanning. =back =head3 L<perldata> =over 4 =item * The syntax of single-character variable names has been brought up-to-date and more fully explained. =item * Hexadecimal floating point numbers are described, as are infinity and NaN. =back =head3 L<perlebcdic> =over 4 =item * This document has been significantly updated in the light of recent improvements to EBCDIC support. =back =head3 L<perlfilter> =over 4 =item * Added a L<LIMITATIONS|perlfilter/LIMITATIONS> section. =back =head3 L<perlfunc> =over 4 =item * Mention that C<study()> is currently a no-op. =item * Calling C<delete> or C<exists> on array values is now described as "strongly discouraged" rather than "deprecated". =item * Improve documentation of C<< our >>. =item * C<-l> now notes that it will return false if symlinks aren't supported by the file system. L<[perl #121523]|https://rt.perl.org/Ticket/Display.html?id=121523> =item * Note that C<exec LIST> and C<system LIST> may fall back to the shell on Win32. Only the indirect-object syntax C<exec PROGRAM LIST> and C<system PROGRAM LIST> will reliably avoid using the shell. This has also been noted in L<perlport>. L<[perl #122046]|https://rt.perl.org/Ticket/Display.html?id=122046> =back =head3 L<perlguts> =over 4 =item * The OOK example has been updated to account for COW changes and a change in the storage of the offset. =item * Details on C level symbols and libperl.t added. =item * Information on Unicode handling has been added =item * Information on EBCDIC handling has been added =back =head3 L<perlhack> =over 4 =item * A note has been added about running on platforms with non-ASCII character sets =item * A note has been added about performance testing =back =head3 L<perlhacktips> =over 4 =item * Documentation has been added illustrating the perils of assuming that there is no change to the contents of static memory pointed to by the return values of Perl's wrappers for C library functions. =item * Replacements for C<tmpfile>, C<atoi>, C<strtol>, and C<strtoul> are now recommended. =item * Updated documentation for the C<test.valgrind> C<make> target. L<[perl #121431]|https://rt.perl.org/Ticket/Display.html?id=121431> =item * Information is given about writing test files portably to non-ASCII platforms. =item * A note has been added about how to get a C language stack backtrace. =back =head3 L<perlhpux> =over 4 =item * Note that the message "Redeclaration of "sendpath" with a different storage class specifier" is harmless. =back =head3 L<perllocale> =over 4 =item * Updated for the enhancements in v5.22, along with some clarifications. =back =head3 L<perlmodstyle> =over 4 =item * Instead of pointing to the module list, we are now pointing to L<PrePAN|http://prepan.org/>. =back =head3 L<perlop> =over 4 =item * Updated for the enhancements in v5.22, along with some clarifications. =back =head3 L<perlpodspec> =over 4 =item * The specification of the pod language is changing so that the default encoding of pods that aren't in UTF-8 (unless otherwise indicated) is CP1252 instead of ISO 8859-1 (Latin1). =back =head3 L<perlpolicy> =over 4 =item * We now have a code of conduct for the I<< p5p >> mailing list, as documented in L<< perlpolicy/STANDARDS OF CONDUCT >>. =item * The conditions for marking an experimental feature as non-experimental are now set out. =item * Clarification has been made as to what sorts of changes are permissible in maintenance releases. =back =head3 L<perlport> =over 4 =item * Out-of-date VMS-specific information has been fixed and/or simplified. =item * Notes about EBCDIC have been added. =back =head3 L<perlre> =over 4 =item * The description of the C</x> modifier has been clarified to note that comments cannot be continued onto the next line by escaping them; and there is now a list of all the characters that are considered whitespace by this modifier. =item * The new C</n> modifier is described. =item * A note has been added on how to make bracketed character class ranges portable to non-ASCII machines. =back =head3 L<perlrebackslash> =over 4 =item * Added documentation of C<\b{sb}>, C<\b{wb}>, C<\b{gcb}>, and C<\b{g}>. =back =head3 L<perlrecharclass> =over 4 =item * Clarifications have been added to L<perlrecharclass/Character Ranges> to the effect C<[A-Z]>, C<[a-z]>, C<[0-9]> and any subranges thereof in regular expression bracketed character classes are guaranteed to match exactly what a naive English speaker would expect them to match, even on platforms (such as EBCDIC) where perl has to do extra work to accomplish this. =item * The documentation of Bracketed Character Classes has been expanded to cover the improvements in C<qr/[\N{named sequence}]/> (see under L</Selected Bug Fixes>). =back =head3 L<perlref> =over 4 =item * A new section has been added L<Assigning to References|perlref/Assigning to References> =back =head3 L<perlsec> =over 4 =item * Comments added on algorithmic complexity and tied hashes. =back =head3 L<perlsyn> =over 4 =item * An ambiguity in the documentation of the C<...> statement has been corrected. L<[perl #122661]|https://rt.perl.org/Ticket/Display.html?id=122661> =item * The empty conditional in C<< for >> and C<< while >> is now documented in L<< perlsyn >>. =back =head3 L<perlunicode> =over 4 =item * This has had extensive revisions to bring it up-to-date with current Unicode support and to make it more readable. Notable is that Unicode 7.0 changed what it should do with non-characters. Perl retains the old way of handling for reasons of backward compatibility. See L<perlunicode/Noncharacter code points>. =back =head3 L<perluniintro> =over 4 =item * Advice for how to make sure your strings and regular expression patterns are interpreted as Unicode has been updated. =back =head3 L<perlvar> =over 4 =item * C<$]> is no longer listed as being deprecated. Instead, discussion has been added on the advantages and disadvantages of using it versus C<$^V>. C<$OLD_PERL_VERSION> was re-added to the documentation as the long form of C<$]>. =item * C<${^ENCODING}> is now marked as deprecated. =item * The entry for C<%^H> has been clarified to indicate it can only handle simple values. =back =head3 L<perlvms> =over 4 =item * Out-of-date and/or incorrect material has been removed. =item * Updated documentation on environment and shell interaction in VMS. =back =head3 L<perlxs> =over 4 =item * Added a discussion of locale issues in XS code. =back =head1 Diagnostics The following additions or changes have been made to diagnostic output, including warnings and fatal error messages. For the complete list of diagnostic messages, see L<perldiag>. =head2 New Diagnostics =head3 New Errors =over 4 =item * L<Bad symbol for scalar|perldiag/"Bad symbol for scalar"> (P) An internal request asked to add a scalar entry to something that wasn't a symbol table entry. =item * L<Can't use a hash as a reference|perldiag/"Can't use a hash as a reference"> (F) You tried to use a hash as a reference, as in C<< %foo->{"bar"} >> or C<< %$ref->{"hello"} >>. Versions of perl E<lt>= 5.6.1 used to allow this syntax, but shouldn't have. =item * L<Can't use an array as a reference|perldiag/"Can't use an array as a reference"> (F) You tried to use an array as a reference, as in C<< @foo->[23] >> or C<< @$ref->[99] >>. Versions of perl E<lt>= 5.6.1 used to allow this syntax, but shouldn't have. =item * L<Can't use 'defined(@array)' (Maybe you should just omit the defined()?)|perldiag/"Can't use 'defined(@array)' (Maybe you should just omit the defined()?)"> (F) C<defined()> is not useful on arrays because it checks for an undefined I<scalar> value. If you want to see if the array is empty, just use S<C<if (@array) { # not empty }>> for example. =item * L<Can't use 'defined(%hash)' (Maybe you should just omit the defined()?)|perldiag/"Can't use 'defined(%hash)' (Maybe you should just omit the defined()?)"> (F) C<defined()> is not usually right on hashes. Although S<C<defined %hash>> is false on a plain not-yet-used hash, it becomes true in several non-obvious circumstances, including iterators, weak references, stash names, even remaining true after S<C<undef %hash>>. These things make S<C<defined %hash>> fairly useless in practice, so it now generates a fatal error. If a check for non-empty is what you wanted then just put it in boolean context (see L<perldata/Scalar values>): if (%hash) { # not empty } If you had S<C<defined %Foo::Bar::QUUX>> to check whether such a package variable exists then that's never really been reliable, and isn't a good way to enquire about the features of a package, or whether it's loaded, etc. =item * L<Cannot chr %f|perldiag/"Cannot chr %f"> (F) You passed an invalid number (like an infinity or not-a-number) to C<chr>. =item * L<Cannot compress %f in pack|perldiag/"Cannot compress %f in pack"> (F) You tried converting an infinity or not-a-number to an unsigned character, which makes no sense. =item * L<Cannot pack %f with '%c'|perldiag/"Cannot pack %f with '%c'"> (F) You tried converting an infinity or not-a-number to a character, which makes no sense. =item * L<Cannot print %f with '%c'|perldiag/"Cannot printf %f with '%c'"> (F) You tried printing an infinity or not-a-number as a character (C<%c>), which makes no sense. Maybe you meant C<'%s'>, or just stringifying it? =item * L<charnames alias definitions may not contain a sequence of multiple spaces|perldiag/"charnames alias definitions may not contain a sequence of multiple spaces"> (F) You defined a character name which had multiple space characters in a row. Change them to single spaces. Usually these names are defined in the C<:alias> import argument to C<use charnames>, but they could be defined by a translator installed into C<$^H{charnames}>. See L<charnames/CUSTOM ALIASES>. =item * L<charnames alias definitions may not contain trailing white-space|perldiag/"charnames alias definitions may not contain trailing white-space"> (F) You defined a character name which ended in a space character. Remove the trailing space(s). Usually these names are defined in the C<:alias> import argument to C<use charnames>, but they could be defined by a translator installed into C<$^H{charnames}>. See L<charnames/CUSTOM ALIASES>. =item * L<:const is not permitted on named subroutines|perldiag/":const is not permitted on named subroutines"> (F) The C<const> attribute causes an anonymous subroutine to be run and its value captured at the time that it is cloned. Named subroutines are not cloned like this, so the attribute does not make sense on them. =item * L<Hexadecimal float: internal error|perldiag/"Hexadecimal float: internal error"> (F) Something went horribly bad in hexadecimal float handling. =item * L<Hexadecimal float: unsupported long double format|perldiag/"Hexadecimal float: unsupported long double format"> (F) You have configured Perl to use long doubles but the internals of the long double format are unknown, therefore the hexadecimal float output is impossible. =item * L<Illegal suidscript|perldiag/"Illegal suidscript"> (F) The script run under suidperl was somehow illegal. =item * L<In '(?...)', the '(' and '?' must be adjacent in regex; marked by S<<-- HERE> in mE<sol>%sE<sol>|perldiag/"In '(?...)', the '(' and '?' must be adjacent in regex; marked by <-- HERE in m/%s/"> (F) The two-character sequence C<"(?"> in this context in a regular expression pattern should be an indivisible token, with nothing intervening between the C<"("> and the C<"?">, but you separated them. =item * L<In '(*VERB...)', the '(' and '*' must be adjacent in regex; marked by S<<-- HERE> in mE<sol>%sE<sol>|perldiag/"In '(*VERB...)', the '(' and '*' must be adjacent in regex; marked by <-- HERE in m/%s/"> (F) The two-character sequence C<"(*"> in this context in a regular expression pattern should be an indivisible token, with nothing intervening between the C<"("> and the C<"*">, but you separated them. =item * L<Invalid quantifier in {,} in regex; marked by <-- HERE in mE<sol>%sE<sol>|perldiag/"Invalid quantifier in {,} in regex; marked by <-- HERE in m/%s/"> (F) The pattern looks like a {min,max} quantifier, but the min or max could not be parsed as a valid number: either it has leading zeroes, or it represents too big a number to cope with. The S<<-- HERE> shows where in the regular expression the problem was discovered. See L<perlre>. =item * L<'%s' is an unknown bound type in regex|perldiag/"'%s' is an unknown bound type in regex; marked by <-- HERE in m/%s/"> (F) You used C<\b{...}> or C<\B{...}> and the C<...> is not known to Perl. The current valid ones are given in L<perlrebackslash/\b{}, \b, \B{}, \B>. =item * L<Missing or undefined argument to require|perldiag/Missing or undefined argument to require> (F) You tried to call C<require> with no argument or with an undefined value as an argument. C<require> expects either a package name or a file-specification as an argument. See L<perlfunc/require>. Formerly, C<require> with no argument or C<undef> warned about a Null filename. =back =head3 New Warnings =over 4 =item * L<\C is deprecated in regex|perldiag/"\C is deprecated in regex; marked by <-- HERE in m/%s/"> (D deprecated) The C<< /\C/ >> character class was deprecated in v5.20, and now emits a warning. It is intended that it will become an error in v5.24. This character class matches a single byte even if it appears within a multi-byte character, breaks encapsulation, and can corrupt UTF-8 strings. =item * L<"%s" is more clearly written simply as "%s" in regex; marked by E<lt>-- HERE in mE<sol>%sE<sol>|perldiag/"%s" is more clearly written simply as "%s" in regex; marked by <-- HERE in mE<sol>%sE<sol>> (W regexp) (only under C<S<use re 'strict'>> or within C<(?[...])>) You specified a character that has the given plainer way of writing it, and which is also portable to platforms running with different character sets. =item * L<Argument "%s" treated as 0 in increment (++)|perldiag/"Argument "%s" treated as 0 in increment (++)"> (W numeric) The indicated string was fed as an argument to the C<++> operator which expects either a number or a string matching C</^[a-zA-Z]*[0-9]*\z/>. See L<perlop/Auto-increment and Auto-decrement> for details. =item * L<Both or neither range ends should be Unicode in regex; marked by E<lt>-- HERE in mE<sol>%sE<sol>|perldiag/"Both or neither range ends should be Unicode in regex; marked by <-- HERE in m/%s/"> (W regexp) (only under C<S<use re 'strict'>> or within C<(?[...])>) In a bracketed character class in a regular expression pattern, you had a range which has exactly one end of it specified using C<\N{}>, and the other end is specified using a non-portable mechanism. Perl treats the range as a Unicode range, that is, all the characters in it are considered to be the Unicode characters, and which may be different code points on some platforms Perl runs on. For example, C<[\N{U+06}-\x08]> is treated as if you had instead said C<[\N{U+06}-\N{U+08}]>, that is it matches the characters whose code points in Unicode are 6, 7, and 8. But that C<\x08> might indicate that you meant something different, so the warning gets raised. =item * L<Can't do %s("%s") on non-UTF-8 locale; resolved to "%s".|perldiag/Can't do %s("%s") on non-UTF-8 locale; resolved to "%s".> (W locale) You are 1) running under "C<use locale>"; 2) the current locale is not a UTF-8 one; 3) you tried to do the designated case-change operation on the specified Unicode character; and 4) the result of this operation would mix Unicode and locale rules, which likely conflict. The warnings category C<locale> is new. =item * L<:const is experimental|perldiag/":const is experimental"> (S experimental::const_attr) The C<const> attribute is experimental. If you want to use the feature, disable the warning with C<no warnings 'experimental::const_attr'>, but know that in doing so you are taking the risk that your code may break in a future Perl version. =item * L<gmtime(%f) failed|perldiag/"gmtime(%f) failed"> (W overflow) You called C<gmtime> with a number that it could not handle: too large, too small, or NaN. The returned value is C<undef>. =item * L<Hexadecimal float: exponent overflow|perldiag/"Hexadecimal float: exponent overflow"> (W overflow) The hexadecimal floating point has larger exponent than the floating point supports. =item * L<Hexadecimal float: exponent underflow|perldiag/"Hexadecimal float: exponent underflow"> (W overflow) The hexadecimal floating point has smaller exponent than the floating point supports. =item * L<Hexadecimal float: mantissa overflow|perldiag/"Hexadecimal float: mantissa overflow"> (W overflow) The hexadecimal floating point literal had more bits in the mantissa (the part between the C<0x> and the exponent, also known as the fraction or the significand) than the floating point supports. =item * L<Hexadecimal float: precision loss|perldiag/"Hexadecimal float: precision loss"> (W overflow) The hexadecimal floating point had internally more digits than could be output. This can be caused by unsupported long double formats, or by 64-bit integers not being available (needed to retrieve the digits under some configurations). =item * L<Locale '%s' may not work well.%s|perldiag/Locale '%s' may not work well.%s> (W locale) You are using the named locale, which is a non-UTF-8 one, and which perl has determined is not fully compatible with what it can handle. The second C<%s> gives a reason. The warnings category C<locale> is new. =item * L<localtime(%f) failed|perldiag/"localtime(%f) failed"> (W overflow) You called C<localtime> with a number that it could not handle: too large, too small, or NaN. The returned value is C<undef>. =item * L<Negative repeat count does nothing|perldiag/"Negative repeat count does nothing"> (W numeric) You tried to execute the L<C<x>|perlop/Multiplicative Operators> repetition operator fewer than 0 times, which doesn't make sense. =item * L<NO-BREAK SPACE in a charnames alias definition is deprecated|perldiag/"NO-BREAK SPACE in a charnames alias definition is deprecated"> (D deprecated) You defined a character name which contained a no-break space character. Change it to a regular space. Usually these names are defined in the C<:alias> import argument to C<use charnames>, but they could be defined by a translator installed into C<$^H{charnames}>. See L<charnames/CUSTOM ALIASES>. =item * L<Non-finite repeat count does nothing|perldiag/"Non-finite repeat count does nothing"> (W numeric) You tried to execute the L<C<x>|perlop/Multiplicative Operators> repetition operator C<Inf> (or C<-Inf>) or NaN times, which doesn't make sense. =item * L<PerlIO layer ':win32' is experimental|perldiag/"PerlIO layer ':win32' is experimental"> (S experimental::win32_perlio) The C<:win32> PerlIO layer is experimental. If you want to take the risk of using this layer, simply disable this warning: no warnings "experimental::win32_perlio"; =item * L<Ranges of ASCII printables should be some subset of "0-9", "A-Z", or "a-z" in regex; marked by E<lt>-- HERE in mE<sol>%sE<sol>|perldiag/"Ranges of ASCII printables should be some subset of "0-9", "A-Z", or "a-z" in regex; marked by <-- HERE in mE<sol>%sE<sol>"> (W regexp) (only under C<S<use re 'strict'>> or within C<(?[...])>) Stricter rules help to find typos and other errors. Perhaps you didn't even intend a range here, if the C<"-"> was meant to be some other character, or should have been escaped (like C<"\-">). If you did intend a range, the one that was used is not portable between ASCII and EBCDIC platforms, and doesn't have an obvious meaning to a casual reader. [3-7] # OK; Obvious and portable [d-g] # OK; Obvious and portable [A-Y] # OK; Obvious and portable [A-z] # WRONG; Not portable; not clear what is meant [a-Z] # WRONG; Not portable; not clear what is meant [%-.] # WRONG; Not portable; not clear what is meant [\x41-Z] # WRONG; Not portable; not obvious to non-geek (You can force portability by specifying a Unicode range, which means that the endpoints are specified by L<C<\N{...}>|perlrecharclass/Character Ranges>, but the meaning may still not be obvious.) The stricter rules require that ranges that start or stop with an ASCII character that is not a control have all their endpoints be a literal character, and not some escape sequence (like C<"\x41">), and the ranges must be all digits, or all uppercase letters, or all lowercase letters. =item * L<Ranges of digits should be from the same group in regex; marked by E<lt>-- HERE in mE<sol>%sE<sol>|perldiag/"Ranges of digits should be from the same group in regex; marked by <-- HERE in m/%s/"> (W regexp) (only under C<S<use re 'strict'>> or within C<(?[...])>) Stricter rules help to find typos and other errors. You included a range, and at least one of the end points is a decimal digit. Under the stricter rules, when this happens, both end points should be digits in the same group of 10 consecutive digits. =item * L<Redundant argument in %s|perldiag/Redundant argument in %s> (W redundant) You called a function with more arguments than were needed, as indicated by information within other arguments you supplied (I<e.g>. a printf format). Currently only emitted when a printf-type format required fewer arguments than were supplied, but might be used in the future for I<e.g.> L<perlfunc/pack>. The warnings category C<< redundant >> is new. See also L<[perl #121025]|https://rt.perl.org/Ticket/Display.html?id=121025>. =item * L<Replacement list is longer than search list|perldiag/Replacement list is longer than search list> This is not a new diagnostic, but in earlier releases was accidentally not displayed if the transliteration contained wide characters. This is now fixed, so that you may see this diagnostic in places where you previously didn't (but should have). =item * L<Use of \b{} for non-UTF-8 locale is wrong. Assuming a UTF-8 locale|perldiag/"Use of \b{} for non-UTF-8 locale is wrong. Assuming a UTF-8 locale"> (W locale) You are matching a regular expression using locale rules, and a Unicode boundary is being matched, but the locale is not a Unicode one. This doesn't make sense. Perl will continue, assuming a Unicode (UTF-8) locale, but the results could well be wrong except if the locale happens to be ISO-8859-1 (Latin1) where this message is spurious and can be ignored. The warnings category C<locale> is new. =item * L<< Using E<sol>u for '%s' instead of E<sol>%s in regex; marked by E<lt>-- HERE in mE<sol>%sE<sol>|perldiag/"Using E<sol>u for '%s' instead of E<sol>%s in regex; marked by <-- HERE in mE<sol>%sE<sol>" >> (W regexp) You used a Unicode boundary (C<\b{...}> or C<\B{...}>) in a portion of a regular expression where the character set modifiers C</a> or C</aa> are in effect. These two modifiers indicate an ASCII interpretation, and this doesn't make sense for a Unicode definition. The generated regular expression will compile so that the boundary uses all of Unicode. No other portion of the regular expression is affected. =item * L<The bitwise feature is experimental|perldiag/"The bitwise feature is experimental"> (S experimental::bitwise) This warning is emitted if you use bitwise operators (C<& | ^ ~ &. |. ^. ~.>) with the "bitwise" feature enabled. Simply suppress the warning if you want to use the feature, but know that in doing so you are taking the risk of using an experimental feature which may change or be removed in a future Perl version: no warnings "experimental::bitwise"; use feature "bitwise"; $x |.= $y; =item * L<Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in mE<sol>%sE<sol>|perldiag/"Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/%s/"> (D deprecated, regexp) You used a literal C<"{"> character in a regular expression pattern. You should change to use C<"\{"> instead, because a future version of Perl (tentatively v5.26) will consider this to be a syntax error. If the pattern delimiters are also braces, any matching right brace (C<"}">) should also be escaped to avoid confusing the parser, for example, qr{abc\{def\}ghi} =item * L<Use of literal non-graphic characters in variable names is deprecated|perldiag/"Use of literal non-graphic characters in variable names is deprecated"> (D deprecated) Using literal non-graphic (including control) characters in the source to refer to the I<^FOO> variables, like C<$^X> and C<${^GLOBAL_PHASE}> is now deprecated. =item * L<Useless use of attribute "const"|perldiag/Useless use of attribute "const"> (W misc) The C<const> attribute has no effect except on anonymous closure prototypes. You applied it to a subroutine via L<attributes.pm|attributes>. This is only useful inside an attribute handler for an anonymous subroutine. =item * L<Useless use of E<sol>d modifier in transliteration operator|perldiag/"Useless use of /d modifier in transliteration operator"> This is not a new diagnostic, but in earlier releases was accidentally not displayed if the transliteration contained wide characters. This is now fixed, so that you may see this diagnostic in places where you previously didn't (but should have). =item * L<E<quot>use re 'strict'E<quot> is experimental|perldiag/"use re 'strict'" is experimental> (S experimental::re_strict) The things that are different when a regular expression pattern is compiled under C<'strict'> are subject to change in future Perl releases in incompatible ways; there are also proposals to change how to enable strict checking instead of using this subpragma. This means that a pattern that compiles today may not in a future Perl release. This warning is to alert you to that risk. =item * L<Warning: unable to close filehandle properly: %s|perldiag/"Warning: unable to close filehandle properly: %s"> L<Warning: unable to close filehandle %s properly: %s|perldiag/"Warning: unable to close filehandle %s properly: %s"> (S io) Previously, perl silently ignored any errors when doing an implicit close of a filehandle, I<i.e.> where the reference count of the filehandle reached zero and the user's code hadn't already called C<close()>; I<e.g.> { open my $fh, '>', $file or die "open: '$file': $!\n"; print $fh, $data or die; } # implicit close here In a situation such as disk full, due to buffering, the error may only be detected during the final close, so not checking the result of the close is dangerous. So perl now warns in such situations. =item * L<Wide character (U+%X) in %s|perldiag/"Wide character (U+%X) in %s"> (W locale) While in a single-byte locale (I<i.e.>, a non-UTF-8 one), a multi-byte character was encountered. Perl considers this character to be the specified Unicode code point. Combining non-UTF-8 locales and Unicode is dangerous. Almost certainly some characters will have two different representations. For example, in the ISO 8859-7 (Greek) locale, the code point 0xC3 represents a Capital Gamma. But so also does 0x393. This will make string comparisons unreliable. You likely need to figure out how this multi-byte character got mixed up with your single-byte locale (or perhaps you thought you had a UTF-8 locale, but Perl disagrees). The warnings category C<locale> is new. =back =head2 Changes to Existing Diagnostics =over 4 =item * <> should be quotes This warning has been changed to L<< <> at require-statement should be quotes|perldiag/"<> at require-statement should be quotes" >> to make the issue more identifiable. =item * L<Argument "%s" isn't numeric%s|perldiag/"Argument "%s" isn't numeric%s"> The L<perldiag> entry for this warning has added this clarifying note: Note that for the Inf and NaN (infinity and not-a-number) the definition of "numeric" is somewhat unusual: the strings themselves (like "Inf") are considered numeric, and anything following them is considered non-numeric. =item * L<Global symbol "%s" requires explicit package name|perldiag/"Global symbol "%s" requires explicit package name (did you forget to declare "my %s"?)"> This message has had '(did you forget to declare "my %s"?)' appended to it, to make it more helpful to new Perl programmers. L<[perl #121638]|https://rt.perl.org/Ticket/Display.html?id=121638> =item * '"my" variable &foo::bar can't be in a package' has been reworded to say 'subroutine' instead of 'variable'. =item * L<<< \N{} in character class restricted to one character in regex; marked by S<< <-- HERE >> in mE<sol>%sE<sol>|perldiag/"\N{} in inverted character class or as a range end-point is restricted to one character in regex; marked by <-- HERE in m/%s/" >>> This message has had I<character class> changed to I<inverted character class or as a range end-point is> to reflect improvements in C<qr/[\N{named sequence}]/> (see under L</Selected Bug Fixes>). =item * L<panic: frexp|perldiag/"panic: frexp: %f"> This message has had ': C<%f>' appended to it, to show what the offending floating point number is. =item * I<Possible precedence problem on bitwise %c operator> reworded as L<Possible precedence problem on bitwise %s operator|perldiag/"Possible precedence problem on bitwise %s operator">. =item * L<Unsuccessful %s on filename containing newline|perldiag/"Unsuccessful %s on filename containing newline"> This warning is now only produced when the newline is at the end of the filename. =item * "Variable C<%s> will not stay shared" has been changed to say "Subroutine" when it is actually a lexical sub that will not stay shared. =item * L<Variable length lookbehind not implemented in regex mE<sol>%sE<sol>|perldiag/"Variable length lookbehind not implemented in regex m/%s/"> The L<perldiag> entry for this warning has had information about Unicode behavior added. =back =head2 Diagnostic Removals =over =item * "Ambiguous use of -foo resolved as -&foo()" There is actually no ambiguity here, and this impedes the use of negated constants; I<e.g.>, C<-Inf>. =item * "Constant is not a FOO reference" Compile-time checking of constant dereferencing (I<e.g.>, C<< my_constant->() >>) has been removed, since it was not taking overloading into account. L<[perl #69456]|https://rt.perl.org/Ticket/Display.html?id=69456> L<[perl #122607]|https://rt.perl.org/Ticket/Display.html?id=122607> =back =head1 Utility Changes =head2 F<find2perl>, F<s2p> and F<a2p> removal =over 4 =item * The F<x2p/> directory has been removed from the Perl core. This removes find2perl, s2p and a2p. They have all been released to CPAN as separate distributions (C<App::find2perl>, C<App::s2p>, C<App::a2p>). =back =head2 L<h2ph> =over 4 =item * F<h2ph> now handles hexadecimal constants in the compiler's predefined macro definitions, as visible in C<$Config{cppsymbols}>. L<[perl #123784]|https://rt.perl.org/Ticket/Display.html?id=123784>. =back =head2 L<encguess> =over 4 =item * No longer depends on non-core modules. =back =head1 Configuration and Compilation =over 4 =item * F<Configure> now checks for C<lrintl()>, C<lroundl()>, C<llrintl()>, and C<llroundl()>. =item * F<Configure> with C<-Dmksymlinks> should now be faster. L<[perl #122002]|https://rt.perl.org/Ticket/Display.html?id=122002>. =item * The C<pthreads> and C<cl> libraries will be linked by default if present. This allows XS modules that require threading to work on non-threaded perls. Note that you must still pass C<-Dusethreads> if you want a threaded perl. =item * To get more precision and range for floating point numbers one can now use the GCC quadmath library which implements the quadruple precision floating point numbers on x86 and IA-64 platforms. See F<INSTALL> for details. =item * MurmurHash64A and MurmurHash64B can now be configured as the internal hash function. =item * C<make test.valgrind> now supports parallel testing. For example: TEST_JOBS=9 make test.valgrind See L<perlhacktips/valgrind> for more information. L<[perl #121431]|https://rt.perl.org/Ticket/Display.html?id=121431> =item * The MAD (Misc Attribute Decoration) build option has been removed This was an unmaintained attempt at preserving the Perl parse tree more faithfully so that automatic conversion of Perl 5 to Perl 6 would have been easier. This build-time configuration option had been unmaintained for years, and had probably seriously diverged on both Perl 5 and Perl 6 sides. =item * A new compilation flag, C<< -DPERL_OP_PARENT >> is available. For details, see the discussion below at L<< /Internal Changes >>. =item * Pathtools no longer tries to load XS on miniperl. This speeds up building perl slightly. =back =head1 Testing =over 4 =item * F<t/porting/re_context.t> has been added to test that L<utf8> and its dependencies only use the subset of the C<$1..$n> capture vars that C<Perl_save_re_context()> is hard-coded to localize, because that function has no efficient way of determining at runtime what vars to localize. =item * Tests for performance issues have been added in the file F<t/perf/taint.t>. =item * Some regular expression tests are written in such a way that they will run very slowly if certain optimizations break. These tests have been moved into new files, F<< t/re/speed.t >> and F<< t/re/speed_thr.t >>, and are run with a C<< watchdog() >>. =item * C<< test.pl >> now allows C<< plan skip_all => $reason >>, to make it more compatible with C<< Test::More >>. =item * A new test script, F<op/infnan.t>, has been added to test if infinity and NaN are working correctly. See L</Infinity and NaN (not-a-number) handling improved>. =back =head1 Platform Support =head2 Regained Platforms =over 4 =item IRIX and Tru64 platforms are working again. Some C<make test> failures remain: L<[perl #123977]|https://rt.perl.org/Ticket/Display.html?id=123977> and L<[perl #125298]|https://rt.perl.org/Ticket/Display.html?id=125298> for IRIX; L<[perl #124212]|https://rt.perl.org/Ticket/Display.html?id=124212>, L<[cpan #99605]|https://rt.cpan.org/Public/Bug/Display.html?id=99605>, and L<[cpan #104836]|https://rt.cpan.org/Ticket/Display.html?id=104836> for Tru64. =item z/OS running EBCDIC Code Page 1047 Core perl now works on this EBCDIC platform. Earlier perls also worked, but, even though support wasn't officially withdrawn, recent perls would not compile and run well. Perl 5.20 would work, but had many bugs which have now been fixed. Many CPAN modules that ship with Perl still fail tests, including C<Pod::Simple>. However the version of C<Pod::Simple> currently on CPAN should work; it was fixed too late to include in Perl 5.22. Work is under way to fix many of the still-broken CPAN modules, which likely will be installed on CPAN when completed, so that you may not have to wait until Perl 5.24 to get a working version. =back =head2 Discontinued Platforms =over 4 =item NeXTSTEP/OPENSTEP NeXTSTEP was a proprietary operating system bundled with NeXT's workstations in the early to mid 90s; OPENSTEP was an API specification that provided a NeXTSTEP-like environment on a non-NeXTSTEP system. Both are now long dead, so support for building Perl on them has been removed. =back =head2 Platform-Specific Notes =over 4 =item EBCDIC Special handling is required of the perl interpreter on EBCDIC platforms to get C<qr/[i-j]/> to match only C<"i"> and C<"j">, since there are 7 characters between the code points for C<"i"> and C<"j">. This special handling had only been invoked when both ends of the range are literals. Now it is also invoked if any of the C<\N{...}> forms for specifying a character by name or Unicode code point is used instead of a literal. See L<perlrecharclass/Character Ranges>. =item HP-UX The archname now distinguishes use64bitint from use64bitall. =item Android Build support has been improved for cross-compiling in general and for Android in particular. =item VMS =over 4 =item * When spawning a subprocess without waiting, the return value is now the correct PID. =item * Fix a prototype so linking doesn't fail under the VMS C++ compiler. =item * C<finite>, C<finitel>, and C<isfinite> detection has been added to C<configure.com>, environment handling has had some minor changes, and a fix for legacy feature checking status. =back =item Win32 =over 4 =item * F<miniperl.exe> is now built with C<-fno-strict-aliasing>, allowing 64-bit builds to complete on GCC 4.8. L<[perl #123976]|https://rt.perl.org/Ticket/Display.html?id=123976> =item * C<nmake minitest> now works on Win32. Due to dependency issues you need to build C<nmake test-prep> first, and a small number of the tests fail. L<[perl #123394]|https://rt.perl.org/Ticket/Display.html?id=123394> =item * Perl can now be built in C++ mode on Windows by setting the makefile macro C<USE_CPLUSPLUS> to the value "define". =item * The list form of piped open has been implemented for Win32. Note: unlike C<system LIST> this does not fall back to the shell. L<[perl #121159]|https://rt.perl.org/Ticket/Display.html?id=121159> =item * New C<DebugSymbols> and C<DebugFull> configuration options added to Windows makefiles. =item * Previously, compiling XS modules (including CPAN ones) using Visual C++ for Win64 resulted in around a dozen warnings per file from F<hv_func.h>. These warnings have been silenced. =item * Support for building without PerlIO has been removed from the Windows makefiles. Non-PerlIO builds were all but deprecated in Perl 5.18.0 and are already not supported by F<Configure> on POSIX systems. =item * Between 2 and 6 milliseconds and seven I/O calls have been saved per attempt to open a perl module for each path in C<@INC>. =item * Intel C builds are now always built with C99 mode on. =item * C<%I64d> is now being used instead of C<%lld> for MinGW. =item * In the experimental C<:win32> layer, a crash in C<open> was fixed. Also opening F</dev/null> (which works under Win32 Perl's default C<:unix> layer) was implemented for C<:win32>. L<[perl #122224]|https://rt.perl.org/Ticket/Display.html?id=122224> =item * A new makefile option, C<USE_LONG_DOUBLE>, has been added to the Windows dmake makefile for gcc builds only. Set this to "define" if you want perl to use long doubles to give more accuracy and range for floating point numbers. =back =item OpenBSD On OpenBSD, Perl will now default to using the system C<malloc> due to the security features it provides. Perl's own malloc wrapper has been in use since v5.14 due to performance reasons, but the OpenBSD project believes the tradeoff is worth it and would prefer that users who need the speed specifically ask for it. L<[perl #122000]|https://rt.perl.org/Ticket/Display.html?id=122000>. =item Solaris =over 4 =item * We now look for the Sun Studio compiler in both F</opt/solstudio*> and F</opt/solarisstudio*>. =item * Builds on Solaris 10 with C<-Dusedtrace> would fail early since make didn't follow implied dependencies to build C<perldtrace.h>. Added an explicit dependency to C<depend>. L<[perl #120120]|https://rt.perl.org/Ticket/Display.html?id=120120> =item * C99 options have been cleaned up; hints look for C<solstudio> as well as C<SUNWspro>; and support for native C<setenv> has been added. =back =back =head1 Internal Changes =over 4 =item * Experimental support has been added to allow ops in the optree to locate their parent, if any. This is enabled by the non-default build option C<-DPERL_OP_PARENT>. It is envisaged that this will eventually become enabled by default, so XS code which directly accesses the C<op_sibling> field of ops should be updated to be future-proofed. On C<PERL_OP_PARENT> builds, the C<op_sibling> field has been renamed C<op_sibparent> and a new flag, C<op_moresib>, added. On the last op in a sibling chain, C<op_moresib> is false and C<op_sibparent> points to the parent (if any) rather than being C<NULL>. To make existing code work transparently whether using C<PERL_OP_PARENT> or not, a number of new macros and functions have been added that should be used, rather than directly manipulating C<op_sibling>. For the case of just reading C<op_sibling> to determine the next sibling, two new macros have been added. A simple scan through a sibling chain like this: for (; kid->op_sibling; kid = kid->op_sibling) { ... } should now be written as: for (; OpHAS_SIBLING(kid); kid = OpSIBLING(kid)) { ... } For altering optrees, a general-purpose function C<op_sibling_splice()> has been added, which allows for manipulation of a chain of sibling ops. By analogy with the Perl function C<splice()>, it allows you to cut out zero or more ops from a sibling chain and replace them with zero or more new ops. It transparently handles all the updating of sibling, parent, op_last pointers etc. If you need to manipulate ops at a lower level, then three new macros, C<OpMORESIB_set>, C<OpLASTSIB_set> and C<OpMAYBESIB_set> are intended to be a low-level portable way to set C<op_sibling> / C<op_sibparent> while also updating C<op_moresib>. The first sets the sibling pointer to a new sibling, the second makes the op the last sibling, and the third conditionally does the first or second action. Note that unlike C<op_sibling_splice()> these macros won't maintain consistency in the parent at the same time (I<e.g.> by updating C<op_first> and C<op_last> where appropriate). A C-level C<Perl_op_parent()> function and a Perl-level C<B::OP::parent()> method have been added. The C function only exists under C<PERL_OP_PARENT> builds (using it is build-time error on vanilla perls). C<B::OP::parent()> exists always, but on a vanilla build it always returns C<NULL>. Under C<PERL_OP_PARENT>, they return the parent of the current op, if any. The variable C<$B::OP::does_parent> allows you to determine whether C<B> supports retrieving an op's parent. C<PERL_OP_PARENT> was introduced in 5.21.2, but the interface was changed considerably in 5.21.11. If you updated your code before the 5.21.11 changes, it may require further revision. The main changes after 5.21.2 were: =over 4 =item * The C<OP_SIBLING> and C<OP_HAS_SIBLING> macros have been renamed C<OpSIBLING> and C<OpHAS_SIBLING> for consistency with other op-manipulating macros. =item * The C<op_lastsib> field has been renamed C<op_moresib>, and its meaning inverted. =item * The macro C<OpSIBLING_set> has been removed, and has been superseded by C<OpMORESIB_set> I<et al>. =item * The C<op_sibling_splice()> function now accepts a null C<parent> argument where the splicing doesn't affect the first or last ops in the sibling chain =back =item * Macros have been created to allow XS code to better manipulate the POSIX locale category C<LC_NUMERIC>. See L<perlapi/Locale-related functions and macros>. =item * The previous C<atoi> I<et al> replacement function, C<grok_atou>, has now been superseded by C<grok_atoUV>. See L<perlclib> for details. =item * A new function, C<Perl_sv_get_backrefs()>, has been added which allows you retrieve the weak references, if any, which point at an SV. =item * The C<screaminstr()> function has been removed. Although marked as public API, it was undocumented and had no usage in CPAN modules. Calling it has been fatal since 5.17.0. =item * The C<newDEFSVOP()>, C<block_start()>, C<block_end()> and C<intro_my()> functions have been added to the API. =item * The internal C<convert> function in F<op.c> has been renamed C<op_convert_list> and added to the API. =item * The C<sv_magic()> function no longer forbids "ext" magic on read-only values. After all, perl can't know whether the custom magic will modify the SV or not. L<[perl #123103]|https://rt.perl.org/Ticket/Display.html?id=123103>. =item * Accessing L<perlapi/CvPADLIST> on an XSUB is now forbidden. The C<CvPADLIST> field has been reused for a different internal purpose for XSUBs. So in particular, you can no longer rely on it being NULL as a test of whether a CV is an XSUB. Use C<CvISXSUB()> instead. =item * SVs of type C<SVt_NV> are now sometimes bodiless when the build configuration and platform allow it: specifically, when C<< sizeof(NV) <= sizeof(IV) >>. "Bodiless" means that the NV value is stored directly in the head of an SV, without requiring a separate body to be allocated. This trick has already been used for IVs since 5.9.2 (though in the case of IVs, it is always used, regardless of platform and build configuration). =item * The C<$DB::single>, C<$DB::signal> and C<$DB::trace> variables now have set- and get-magic that stores their values as IVs, and those IVs are used when testing their values in C<pp_dbstate()>. This prevents perl from recursing infinitely if an overloaded object is assigned to any of those variables. L<[perl #122445]|https://rt.perl.org/Ticket/Display.html?id=122445>. =item * C<Perl_tmps_grow()>, which is marked as public API but is undocumented, has been removed from the public API. This change does not affect XS code that uses the C<EXTEND_MORTAL> macro to pre-extend the mortal stack. =item * Perl's internals no longer sets or uses the C<SVs_PADMY> flag. C<SvPADMY()> now returns a true value for anything not marked C<PADTMP> and C<SVs_PADMY> is now defined as 0. =item * The macros C<SETsv> and C<SETsvUN> have been removed. They were no longer used in the core since commit 6f1401dc2a five years ago, and have not been found present on CPAN. =item * The C<< SvFAKE >> bit (unused on HVs) got informally reserved by David Mitchell for future work on vtables. =item * The C<sv_catpvn_flags()> function accepts C<SV_CATBYTES> and C<SV_CATUTF8> flags, which specify whether the appended string is bytes or UTF-8, respectively. (These flags have in fact been present since 5.16.0, but were formerly not regarded as part of the API.) =item * A new opcode class, C<< METHOP >>, has been introduced. It holds information used at runtime to improve the performance of class/object method calls. C<< OP_METHOD >> and C<< OP_METHOD_NAMED >> have changed from being C<< UNOP/SVOP >> to being C<< METHOP >>. =item * C<cv_name()> is a new API function that can be passed a CV or GV. It returns an SV containing the name of the subroutine, for use in diagnostics. L<[perl #116735]|https://rt.perl.org/Ticket/Display.html?id=116735> L<[perl #120441]|https://rt.perl.org/Ticket/Display.html?id=120441> =item * C<cv_set_call_checker_flags()> is a new API function that works like C<cv_set_call_checker()>, except that it allows the caller to specify whether the call checker requires a full GV for reporting the subroutine's name, or whether it could be passed a CV instead. Whatever value is passed will be acceptable to C<cv_name()>. C<cv_set_call_checker()> guarantees there will be a GV, but it may have to create one on the fly, which is inefficient. L<[perl #116735]|https://rt.perl.org/Ticket/Display.html?id=116735> =item * C<CvGV> (which is not part of the API) is now a more complex macro, which may call a function and reify a GV. For those cases where it has been used as a boolean, C<CvHASGV> has been added, which will return true for CVs that notionally have GVs, but without reifying the GV. C<CvGV> also returns a GV now for lexical subs. L<[perl #120441]|https://rt.perl.org/Ticket/Display.html?id=120441> =item * The L<perlapi/sync_locale> function has been added to the public API. Changing the program's locale should be avoided by XS code. Nevertheless, certain non-Perl libraries called from XS need to do so, such as C<Gtk>. When this happens, Perl needs to be told that the locale has changed. Use this function to do so, before returning to Perl. =item * The defines and labels for the flags in the C<op_private> field of OPs are now auto-generated from data in F<regen/op_private>. The noticeable effect of this is that some of the flag output of C<Concise> might differ slightly, and the flag output of S<C<perl -Dx>> may differ considerably (they both use the same set of labels now). Also, debugging builds now have a new assertion in C<op_free()> to ensure that the op doesn't have any unrecognized flags set in C<op_private>. =item * The deprecated variable C<PL_sv_objcount> has been removed. =item * Perl now tries to keep the locale category C<LC_NUMERIC> set to "C" except around operations that need it to be set to the program's underlying locale. This protects the many XS modules that cannot cope with the decimal radix character not being a dot. Prior to this release, Perl initialized this category to "C", but a call to C<POSIX::setlocale()> would change it. Now such a call will change the underlying locale of the C<LC_NUMERIC> category for the program, but the locale exposed to XS code will remain "C". There are new macros to manipulate the LC_NUMERIC locale, including C<STORE_LC_NUMERIC_SET_TO_NEEDED> and C<STORE_LC_NUMERIC_FORCE_TO_UNDERLYING>. See L<perlapi/Locale-related functions and macros>. =item * A new macro L<C<isUTF8_CHAR>|perlapi/isUTF8_CHAR> has been written which efficiently determines if the string given by its parameters begins with a well-formed UTF-8 encoded character. =item * The following private API functions had their context parameter removed: C<Perl_cast_ulong>, C<Perl_cast_i32>, C<Perl_cast_iv>, C<Perl_cast_uv>, C<Perl_cv_const_sv>, C<Perl_mg_find>, C<Perl_mg_findext>, C<Perl_mg_magical>, C<Perl_mini_mktime>, C<Perl_my_dirfd>, C<Perl_sv_backoff>, C<Perl_utf8_hop>. Note that the prefix-less versions of those functions that are part of the public API, such as C<cast_i32()>, remain unaffected. =item * The C<PADNAME> and C<PADNAMELIST> types are now separate types, and no longer simply aliases for SV and AV. L<[perl #123223]|https://rt.perl.org/Ticket/Display.html?id=123223>. =item * Pad names are now always UTF-8. The C<PadnameUTF8> macro always returns true. Previously, this was effectively the case already, but any support for two different internal representations of pad names has now been removed. =item * A new op class, C<UNOP_AUX>, has been added. This is a subclass of C<UNOP> with an C<op_aux> field added, which points to an array of unions of UV, SV* etc. It is intended for where an op needs to store more data than a simple C<op_sv> or whatever. Currently the only op of this type is C<OP_MULTIDEREF> (see next item). =item * A new op has been added, C<OP_MULTIDEREF>, which performs one or more nested array and hash lookups where the key is a constant or simple variable. For example the expression C<$a[0]{$k}[$i]>, which previously involved ten C<rv2Xv>, C<Xelem>, C<gvsv> and C<const> ops is now performed by a single C<multideref> op. It can also handle C<local>, C<exists> and C<delete>. A non-simple index expression, such as C<[$i+1]> is still done using C<aelem>/C<helem>, and single-level array lookup with a small constant index is still done using C<aelemfast>. =back =head1 Selected Bug Fixes =over 4 =item * C<close> now sets C<$!> When an I/O error occurs, the fact that there has been an error is recorded in the handle. C<close> returns false for such a handle. Previously, the value of C<$!> would be untouched by C<close>, so the common convention of writing S<C<close $fh or die $!>> did not work reliably. Now the handle records the value of C<$!>, too, and C<close> restores it. =item * C<no re> now can turn off everything that C<use re> enables Previously, running C<no re> would turn off only a few things. Now it can turn off all the enabled things. For example, the only way to stop debugging, once enabled, was to exit the enclosing block; that is now fixed. =item * C<pack("D", $x)> and C<pack("F", $x)> now zero the padding on x86 long double builds. Under some build options on GCC 4.8 and later, they used to either overwrite the zero-initialized padding, or bypass the initialized buffer entirely. This caused F<op/pack.t> to fail. L<[perl #123971]|https://rt.perl.org/Ticket/Display.html?id=123971> =item * Extending an array cloned from a parent thread could result in "Modification of a read-only value attempted" errors when attempting to modify the new elements. L<[perl #124127]|https://rt.perl.org/Ticket/Display.html?id=124127> =item * An assertion failure and subsequent crash with C<< *x=<y> >> has been fixed. L<[perl #123790]|https://rt.perl.org/Ticket/Display.html?id=123790> =item * A possible crashing/looping bug related to compiling lexical subs has been fixed. L<[perl #124099]|https://rt.perl.org/Ticket/Display.html?id=124099> =item * UTF-8 now works correctly in function names, in unquoted HERE-document terminators, and in variable names used as array indexes. L<[perl #124113]|https://rt.perl.org/Ticket/Display.html?id=124113> =item * Repeated global pattern matches in scalar context on large tainted strings were exponentially slow depending on the current match position in the string. L<[perl #123202]|https://rt.perl.org/Ticket/Display.html?id=123202> =item * Various crashes due to the parser getting confused by syntax errors have been fixed. L<[perl #123801]|https://rt.perl.org/Ticket/Display.html?id=123801> L<[perl #123802]|https://rt.perl.org/Ticket/Display.html?id=123802> L<[perl #123955]|https://rt.perl.org/Ticket/Display.html?id=123955> L<[perl #123995]|https://rt.perl.org/Ticket/Display.html?id=123995> =item * C<split> in the scope of lexical C<$_> has been fixed not to fail assertions. L<[perl #123763]|https://rt.perl.org/Ticket/Display.html?id=123763> =item * C<my $x : attr> syntax inside various list operators no longer fails assertions. L<[perl #123817]|https://rt.perl.org/Ticket/Display.html?id=123817> =item * An C<@> sign in quotes followed by a non-ASCII digit (which is not a valid identifier) would cause the parser to crash, instead of simply trying the C<@> as literal. This has been fixed. L<[perl #123963]|https://rt.perl.org/Ticket/Display.html?id=123963> =item * C<*bar::=*foo::=*glob_with_hash> has been crashing since Perl 5.14, but no longer does. L<[perl #123847]|https://rt.perl.org/Ticket/Display.html?id=123847> =item * C<foreach> in scalar context was not pushing an item on to the stack, resulting in bugs. (S<C<print 4, scalar do { foreach(@x){} } + 1>> would print 5.) It has been fixed to return C<undef>. L<[perl #124004]|https://rt.perl.org/Ticket/Display.html?id=124004> =item * Several cases of data used to store environment variable contents in core C code being potentially overwritten before being used have been fixed. L<[perl #123748]|https://rt.perl.org/Ticket/Display.html?id=123748> =item * Some patterns starting with C</.*..../> matched against long strings have been slow since v5.8, and some of the form C</.*..../i> have been slow since v5.18. They are now all fast again. L<[perl #123743]|https://rt.perl.org/Ticket/Display.html?id=123743>. =item * The original visible value of C<$/> is now preserved when it is set to an invalid value. Previously if you set C<$/> to a reference to an array, for example, perl would produce a runtime error and not set C<PL_rs>, but Perl code that checked C<$/> would see the array reference. L<[perl #123218]|https://rt.perl.org/Ticket/Display.html?id=123218>. =item * In a regular expression pattern, a POSIX class, like C<[:ascii:]>, must be inside a bracketed character class, like C<qr/[[:ascii:]]/>. A warning is issued when something looking like a POSIX class is not inside a bracketed class. That warning wasn't getting generated when the POSIX class was negated: C<[:^ascii:]>. This is now fixed. =item * Perl 5.14.0 introduced a bug whereby S<C<eval { LABEL: }>> would crash. This has been fixed. L<[perl #123652]|https://rt.perl.org/Ticket/Display.html?id=123652>. =item * Various crashes due to the parser getting confused by syntax errors have been fixed. L<[perl #123617]|https://rt.perl.org/Ticket/Display.html?id=123617>. L<[perl #123737]|https://rt.perl.org/Ticket/Display.html?id=123737>. L<[perl #123753]|https://rt.perl.org/Ticket/Display.html?id=123753>. L<[perl #123677]|https://rt.perl.org/Ticket/Display.html?id=123677>. =item * Code like C</$a[/> used to read the next line of input and treat it as though it came immediately after the opening bracket. Some invalid code consequently would parse and run, but some code caused crashes, so this is now disallowed. L<[perl #123712]|https://rt.perl.org/Ticket/Display.html?id=123712>. =item * Fix argument underflow for C<pack>. L<[perl #123874]|https://rt.perl.org/Ticket/Display.html?id=123874>. =item * Fix handling of non-strict C<\x{}>. Now C<\x{}> is equivalent to C<\x{0}> instead of faulting. =item * C<stat -t> is now no longer treated as stackable, just like C<-t stat>. L<[perl #123816]|https://rt.perl.org/Ticket/Display.html?id=123816>. =item * The following no longer causes a SEGV: C<qr{x+(y(?0))*}>. =item * Fixed infinite loop in parsing backrefs in regexp patterns. =item * Several minor bug fixes in behavior of Infinity and NaN, including warnings when stringifying Infinity-like or NaN-like strings. For example, "NaNcy" doesn't numify to NaN anymore. =item * A bug in regular expression patterns that could lead to segfaults and other crashes has been fixed. This occurred only in patterns compiled with C</i> while taking into account the current POSIX locale (which usually means they have to be compiled within the scope of C<S<use locale>>), and there must be a string of at least 128 consecutive bytes to match. L<[perl #123539]|https://rt.perl.org/Ticket/Display.html?id=123539>. =item * C<s///g> now works on very long strings (where there are more than 2 billion iterations) instead of dying with 'Substitution loop'. L<[perl #103260]|https://rt.perl.org/Ticket/Display.html?id=103260>. L<[perl #123071]|https://rt.perl.org/Ticket/Display.html?id=123071>. =item * C<gmtime> no longer crashes with not-a-number values. L<[perl #123495]|https://rt.perl.org/Ticket/Display.html?id=123495>. =item * C<\()> (a reference to an empty list), and C<y///> with lexical C<$_> in scope, could both do a bad write past the end of the stack. They have both been fixed to extend the stack first. =item * C<prototype()> with no arguments used to read the previous item on the stack, so S<C<print "foo", prototype()>> would print foo's prototype. It has been fixed to infer C<$_> instead. L<[perl #123514]|https://rt.perl.org/Ticket/Display.html?id=123514>. =item * Some cases of lexical state subs declared inside predeclared subs could crash, for example when evalling a string including the name of an outer variable, but no longer do. =item * Some cases of nested lexical state subs inside anonymous subs could cause 'Bizarre copy' errors or possibly even crashes. =item * When trying to emit warnings, perl's default debugger (F<perl5db.pl>) was sometimes giving 'Undefined subroutine &DB::db_warn called' instead. This bug, which started to occur in Perl 5.18, has been fixed. L<[perl #123553]|https://rt.perl.org/Ticket/Display.html?id=123553>. =item * Certain syntax errors in substitutions, such as C<< s/${<>{})// >>, would crash, and had done so since Perl 5.10. (In some cases the crash did not start happening till 5.16.) The crash has, of course, been fixed. L<[perl #123542]|https://rt.perl.org/Ticket/Display.html?id=123542>. =item * Fix a couple of string grow size calculation overflows; in particular, a repeat expression like S<C<33 x ~3>> could cause a large buffer overflow since the new output buffer size was not correctly handled by C<SvGROW()>. An expression like this now properly produces a memory wrap panic. L<[perl #123554]|https://rt.perl.org/Ticket/Display.html?id=123554>. =item * C<< formline("@...", "a"); >> would crash. The C<FF_CHECKNL> case in C<pp_formline()> didn't set the pointer used to mark the chop position, which led to the C<FF_MORE> case crashing with a segmentation fault. This has been fixed. L<[perl #123538]|https://rt.perl.org/Ticket/Display.html?id=123538>. =item * A possible buffer overrun and crash when parsing a literal pattern during regular expression compilation has been fixed. L<[perl #123604]|https://rt.perl.org/Ticket/Display.html?id=123604>. =item * C<fchmod()> and C<futimes()> now set C<$!> when they fail due to being passed a closed file handle. L<[perl #122703]|https://rt.perl.org/Ticket/Display.html?id=122703>. =item * C<op_free()> and C<scalarvoid()> no longer crash due to a stack overflow when freeing a deeply recursive op tree. L<[perl #108276]|https://rt.perl.org/Ticket/Display.html?id=108276>. =item * In Perl 5.20.0, C<$^N> accidentally had the internal UTF-8 flag turned off if accessed from a code block within a regular expression, effectively UTF-8-encoding the value. This has been fixed. L<[perl #123135]|https://rt.perl.org/Ticket/Display.html?id=123135>. =item * A failed C<semctl> call no longer overwrites existing items on the stack, which means that C<(semctl(-1,0,0,0))[0]> no longer gives an "uninitialized" warning. =item * C<else{foo()}> with no space before C<foo> is now better at assigning the right line number to that statement. L<[perl #122695]|https://rt.perl.org/Ticket/Display.html?id=122695>. =item * Sometimes the assignment in C<@array = split> gets optimised so that C<split> itself writes directly to the array. This caused a bug, preventing this assignment from being used in lvalue context. So C<(@a=split//,"foo")=bar()> was an error. (This bug probably goes back to Perl 3, when the optimisation was added.) It has now been fixed. L<[perl #123057]|https://rt.perl.org/Ticket/Display.html?id=123057>. =item * When an argument list fails the checks specified by a subroutine signature (which is still an experimental feature), the resulting error messages now give the file and line number of the caller, not of the called subroutine. L<[perl #121374]|https://rt.perl.org/Ticket/Display.html?id=121374>. =item * The flip-flop operators (C<..> and C<...> in scalar context) used to maintain a separate state for each recursion level (the number of times the enclosing sub was called recursively), contrary to the documentation. Now each closure has one internal state for each flip-flop. L<[perl #122829]|https://rt.perl.org/Ticket/Display.html?id=122829>. =item * The flip-flop operator (C<..> in scalar context) would return the same scalar each time, unless the containing subroutine was called recursively. Now it always returns a new scalar. L<[perl #122829]|https://rt.perl.org/Ticket/Display.html?id=122829>. =item * C<use>, C<no>, statement labels, special blocks (C<BEGIN>) and pod are now permitted as the first thing in a C<map> or C<grep> block, the block after C<print> or C<say> (or other functions) returning a handle, and within C<${...}>, C<@{...}>, etc. L<[perl #122782]|https://rt.perl.org/Ticket/Display.html?id=122782>. =item * The repetition operator C<x> now propagates lvalue context to its left-hand argument when used in contexts like C<foreach>. That allows S<C<for(($#that_array)x2) { ... }>> to work as expected if the loop modifies C<$_>. =item * C<(...) x ...> in scalar context used to corrupt the stack if one operand was an object with "x" overloading, causing erratic behavior. L<[perl #121827]|https://rt.perl.org/Ticket/Display.html?id=121827>. =item * Assignment to a lexical scalar is often optimised away; for example in C<my $x; $x = $y + $z>, the assign operator is optimised away and the add operator writes its result directly to C<$x>. Various bugs related to this optimisation have been fixed. Certain operators on the right-hand side would sometimes fail to assign the value at all or assign the wrong value, or would call STORE twice or not at all on tied variables. The operators affected were C<$foo++>, C<$foo-->, and C<-$foo> under C<use integer>, C<chomp>, C<chr> and C<setpgrp>. =item * List assignments were sometimes buggy if the same scalar ended up on both sides of the assignment due to use of C<tied>, C<values> or C<each>. The result would be the wrong value getting assigned. =item * C<setpgrp($nonzero)> (with one argument) was accidentally changed in 5.16 to mean C<setpgrp(0)>. This has been fixed. =item * C<__SUB__> could return the wrong value or even corrupt memory under the debugger (the C<-d> switch) and in subs containing C<eval $string>. =item * When S<C<sub () { $var }>> becomes inlinable, it now returns a different scalar each time, just as a non-inlinable sub would, though Perl still optimises the copy away in cases where it would make no observable difference. =item * S<C<my sub f () { $var }>> and S<C<sub () : attr { $var }>> are no longer eligible for inlining. The former would crash; the latter would just throw the attributes away. An exception is made for the little-known C<:method> attribute, which does nothing much. =item * Inlining of subs with an empty prototype is now more consistent than before. Previously, a sub with multiple statements, of which all but the last were optimised away, would be inlinable only if it were an anonymous sub containing a string C<eval> or C<state> declaration or closing over an outer lexical variable (or any anonymous sub under the debugger). Now any sub that gets folded to a single constant after statements have been optimised away is eligible for inlining. This applies to things like C<sub () { jabber() if DEBUG; 42 }>. Some subroutines with an explicit C<return> were being made inlinable, contrary to the documentation, Now C<return> always prevents inlining. =item * On some systems, such as VMS, C<crypt> can return a non-ASCII string. If a scalar assigned to had contained a UTF-8 string previously, then C<crypt> would not turn off the UTF-8 flag, thus corrupting the return value. This would happen with S<C<$lexical = crypt ...>>. =item * C<crypt> no longer calls C<FETCH> twice on a tied first argument. =item * An unterminated here-doc on the last line of a quote-like operator (C<qq[${ <<END }]>, C</(?{ <<END })/>) no longer causes a double free. It started doing so in 5.18. =item * C<index()> and C<rindex()> no longer crash when used on strings over 2GB in size. L<[perl #121562]|https://rt.perl.org/Ticket/Display.html?id=121562>. =item * A small, previously intentional, memory leak in C<PERL_SYS_INIT>/C<PERL_SYS_INIT3> on Win32 builds was fixed. This might affect embedders who repeatedly create and destroy perl engines within the same process. =item * C<POSIX::localeconv()> now returns the data for the program's underlying locale even when called from outside the scope of S<C<use locale>>. =item * C<POSIX::localeconv()> now works properly on platforms which don't have C<LC_NUMERIC> and/or C<LC_MONETARY>, or for which Perl has been compiled to disregard either or both of these locale categories. In such circumstances, there are now no entries for the corresponding values in the hash returned by C<localeconv()>. =item * C<POSIX::localeconv()> now marks appropriately the values it returns as UTF-8 or not. Previously they were always returned as bytes, even if they were supposed to be encoded as UTF-8. =item * On Microsoft Windows, within the scope of C<S<use locale>>, the following POSIX character classes gave results for many locales that did not conform to the POSIX standard: C<[[:alnum:]]>, C<[[:alpha:]]>, C<[[:blank:]]>, C<[[:digit:]]>, C<[[:graph:]]>, C<[[:lower:]]>, C<[[:print:]]>, C<[[:punct:]]>, C<[[:upper:]]>, C<[[:word:]]>, and C<[[:xdigit:]]>. This was because the underlying Microsoft implementation does not follow the standard. Perl now takes special precautions to correct for this. =item * Many issues have been detected by L<Coverity|http://www.coverity.com/> and fixed. =item * C<system()> and friends should now work properly on more Android builds. Due to an oversight, the value specified through C<-Dtargetsh> to F<Configure> would end up being ignored by some of the build process. This caused perls cross-compiled for Android to end up with defective versions of C<system()>, C<exec()> and backticks: the commands would end up looking for C</bin/sh> instead of C</system/bin/sh>, and so would fail for the vast majority of devices, leaving C<$!> as C<ENOENT>. =item * C<qr(...\(...\)...)>, C<qr[...\[...\]...]>, and C<qr{...\{...\}...}> now work. Previously it was impossible to escape these three left-characters with a backslash within a regular expression pattern where otherwise they would be considered metacharacters, and the pattern opening delimiter was the character, and the closing delimiter was its mirror character. =item * C<< s///e >> on tainted UTF-8 strings corrupted C<< pos() >>. This bug, introduced in 5.20, is now fixed. L<[perl #122148]|https://rt.perl.org/Ticket/Display.html?id=122148>. =item * A non-word boundary in a regular expression (C<< \B >>) did not always match the end of the string; in particular C<< q{} =~ /\B/ >> did not match. This bug, introduced in perl 5.14, is now fixed. L<[perl #122090]|https://rt.perl.org/Ticket/Display.html?id=122090>. =item * C<< " P" =~ /(?=.*P)P/ >> should match, but did not. This is now fixed. L<[perl #122171]|https://rt.perl.org/Ticket/Display.html?id=122171>. =item * Failing to compile C<use Foo> in an C<eval> could leave a spurious C<BEGIN> subroutine definition, which would produce a "Subroutine BEGIN redefined" warning on the next use of C<use>, or other C<BEGIN> block. L<[perl #122107]|https://rt.perl.org/Ticket/Display.html?id=122107>. =item * C<method { BLOCK } ARGS> syntax now correctly parses the arguments if they begin with an opening brace. L<[perl #46947]|https://rt.perl.org/Ticket/Display.html?id=46947>. =item * External libraries and Perl may have different ideas of what the locale is. This is problematic when parsing version strings if the locale's numeric separator has been changed. Version parsing has been patched to ensure it handles the locales correctly. L<[perl #121930]|https://rt.perl.org/Ticket/Display.html?id=121930>. =item * A bug has been fixed where zero-length assertions and code blocks inside of a regex could cause C<pos> to see an incorrect value. L<[perl #122460]|https://rt.perl.org/Ticket/Display.html?id=122460>. =item * Dereferencing of constants now works correctly for typeglob constants. Previously the glob was stringified and its name looked up. Now the glob itself is used. L<[perl #69456]|https://rt.perl.org/Ticket/Display.html?id=69456> =item * When parsing a sigil (C<$> C<@> C<%> C<&)> followed by braces, the parser no longer tries to guess whether it is a block or a hash constructor (causing a syntax error when it guesses the latter), since it can only be a block. =item * S<C<undef $reference>> now frees the referent immediately, instead of hanging on to it until the next statement. L<[perl #122556]|https://rt.perl.org/Ticket/Display.html?id=122556> =item * Various cases where the name of a sub is used (autoload, overloading, error messages) used to crash for lexical subs, but have been fixed. =item * Bareword lookup now tries to avoid vivifying packages if it turns out the bareword is not going to be a subroutine name. =item * Compilation of anonymous constants (I<e.g.>, C<sub () { 3 }>) no longer deletes any subroutine named C<__ANON__> in the current package. Not only was C<*__ANON__{CODE}> cleared, but there was a memory leak, too. This bug goes back to Perl 5.8.0. =item * Stub declarations like C<sub f;> and C<sub f ();> no longer wipe out constants of the same name declared by C<use constant>. This bug was introduced in Perl 5.10.0. =item * C<qr/[\N{named sequence}]/> now works properly in many instances. Some names known to C<\N{...}> refer to a sequence of multiple characters, instead of the usual single character. Bracketed character classes generally only match single characters, but now special handling has been added so that they can match named sequences, but not if the class is inverted or the sequence is specified as the beginning or end of a range. In these cases, the only behavior change from before is a slight rewording of the fatal error message given when this class is part of a C<?[...])> construct. When the C<[...]> stands alone, the same non-fatal warning as before is raised, and only the first character in the sequence is used, again just as before. =item * Tainted constants evaluated at compile time no longer cause unrelated statements to become tainted. L<[perl #122669]|https://rt.perl.org/Ticket/Display.html?id=122669> =item * S<C<open $$fh, ...>>, which vivifies a handle with a name like C<"main::_GEN_0">, was not giving the handle the right reference count, so a double free could happen. =item * When deciding that a bareword was a method name, the parser would get confused if an C<our> sub with the same name existed, and look up the method in the package of the C<our> sub, instead of the package of the invocant. =item * The parser no longer gets confused by C<\U=> within a double-quoted string. It used to produce a syntax error, but now compiles it correctly. L<[perl #80368]|https://rt.perl.org/Ticket/Display.html?id=80368> =item * It has always been the intention for the C<-B> and C<-T> file test operators to treat UTF-8 encoded files as text. (L<perlfunc|perlfunc/-X FILEHANDLE> has been updated to say this.) Previously, it was possible for some files to be considered UTF-8 that actually weren't valid UTF-8. This is now fixed. The operators now work on EBCDIC platforms as well. =item * Under some conditions warning messages raised during regular expression pattern compilation were being output more than once. This has now been fixed. =item * Perl 5.20.0 introduced a regression in which a UTF-8 encoded regular expression pattern that contains a single ASCII lowercase letter did not match its uppercase counterpart. That has been fixed in both 5.20.1 and 5.22.0. L<[perl #122655]|https://rt.perl.org/Ticket/Display.html?id=122655> =item * Constant folding could incorrectly suppress warnings if lexical warnings (C<use warnings> or C<no warnings>) were not in effect and C<$^W> were false at compile time and true at run time. =item * Loading Unicode tables during a regular expression match could cause assertion failures under debugging builds if the previous match used the very same regular expression. L<[perl #122747]|https://rt.perl.org/Ticket/Display.html?id=122747> =item * Thread cloning used to work incorrectly for lexical subs, possibly causing crashes or double frees on exit. =item * Since Perl 5.14.0, deleting C<$SomePackage::{__ANON__}> and then undefining an anonymous subroutine could corrupt things internally, resulting in L<Devel::Peek> crashing or L<B.pm|B> giving nonsensical data. This has been fixed. =item * S<C<(caller $n)[3]>> now reports names of lexical subs, instead of treating them as C<"(unknown)">. =item * C<sort subname LIST> now supports using a lexical sub as the comparison routine. =item * Aliasing (I<e.g.>, via S<C<*x = *y>>) could confuse list assignments that mention the two names for the same variable on either side, causing wrong values to be assigned. L<[perl #15667]|https://rt.perl.org/Ticket/Display.html?id=15667> =item * Long here-doc terminators could cause a bad read on short lines of input. This has been fixed. It is doubtful that any crash could have occurred. This bug goes back to when here-docs were introduced in Perl 3.000 twenty-five years ago. =item * An optimization in C<split> to treat S<C<split /^/>> like S<C<split /^/m>> had the unfortunate side-effect of also treating S<C<split /\A/>> like S<C<split /^/m>>, which it should not. This has been fixed. (Note, however, that S<C<split /^x/>> does not behave like S<C<split /^x/m>>, which is also considered to be a bug and will be fixed in a future version.) L<[perl #122761]|https://rt.perl.org/Ticket/Display.html?id=122761> =item * The little-known S<C<my Class $var>> syntax (see L<fields> and L<attributes>) could get confused in the scope of C<use utf8> if C<Class> were a constant whose value contained Latin-1 characters. =item * Locking and unlocking values via L<Hash::Util> or C<Internals::SvREADONLY> no longer has any effect on values that were read-only to begin with. Previously, unlocking such values could result in crashes, hangs or other erratic behavior. =item * Some unterminated C<(?(...)...)> constructs in regular expressions would either crash or give erroneous error messages. C</(?(1)/> is one such example. =item * S<C<pack "w", $tied>> no longer calls FETCH twice. =item * List assignments like S<C<($x, $z) = (1, $y)>> now work correctly if C<$x> and C<$y> have been aliased by C<foreach>. =item * Some patterns including code blocks with syntax errors, such as S<C</ (?{(^{})/>>, would hang or fail assertions on debugging builds. Now they produce errors. =item * An assertion failure when parsing C<sort> with debugging enabled has been fixed. L<[perl #122771]|https://rt.perl.org/Ticket/Display.html?id=122771>. =item * S<C<*a = *b; @a = split //, $b[1]>> could do a bad read and produce junk results. =item * In S<C<() = @array = split>>, the S<C<() =>> at the beginning no longer confuses the optimizer into assuming a limit of 1. =item * Fatal warnings no longer prevent the output of syntax errors. L<[perl #122966]|https://rt.perl.org/Ticket/Display.html?id=122966>. =item * Fixed a NaN double-to-long-double conversion error on VMS. For quiet NaNs (and only on Itanium, not Alpha) negative infinity instead of NaN was produced. =item * Fixed the issue that caused C<< make distclean >> to incorrectly leave some files behind. L<[perl #122820]|https://rt.perl.org/Ticket/Display.html?id=122820>. =item * AIX now sets the length in C<< getsockopt >> correctly. L<[perl #120835]|https://rt.perl.org/Ticket/Display.html?id=120835>. L<[cpan #91183]|https://rt.cpan.org/Ticket/Display.html?id=91183>. L<[cpan #85570]|https://rt.cpan.org/Ticket/Display.html?id=85570>. =item * The optimization phase of a regexp compilation could run "forever" and exhaust all memory under certain circumstances; now fixed. L<[perl #122283]|https://rt.perl.org/Ticket/Display.html?id=122283>. =item * The test script F<< t/op/crypt.t >> now uses the SHA-256 algorithm if the default one is disabled, rather than giving failures. L<[perl #121591]|https://rt.perl.org/Ticket/Display.html?id=121591>. =item * Fixed an off-by-one error when setting the size of a shared array. L<[perl #122950]|https://rt.perl.org/Ticket/Display.html?id=122950>. =item * Fixed a bug that could cause perl to enter an infinite loop during compilation. In particular, a C<while(1)> within a sublist, I<e.g.> sub foo { () = ($a, my $b, ($c, do { while(1) {} })) } The bug was introduced in 5.20.0 L<[perl #122995]|https://rt.perl.org/Ticket/Display.html?id=122995>. =item * On Win32, if a variable was C<local>-ized in a pseudo-process that later forked, restoring the original value in the child pseudo-process caused memory corruption and a crash in the child pseudo-process (and therefore the OS process). L<[perl #40565]|https://rt.perl.org/Ticket/Display.html?id=40565>. =item * Calling C<write> on a format with a C<^**> field could produce a panic in C<sv_chop()> if there were insufficient arguments or if the variable used to fill the field was empty. L<[perl #123245]|https://rt.perl.org/Ticket/Display.html?id=123245>. =item * Non-ASCII lexical sub names now appear without trailing junk when they appear in error messages. =item * The C<\@> subroutine prototype no longer flattens parenthesized arrays (taking a reference to each element), but takes a reference to the array itself. L<[perl #47363]|https://rt.perl.org/Ticket/Display.html?id=47363>. =item * A block containing nothing except a C-style C<for> loop could corrupt the stack, causing lists outside the block to lose elements or have elements overwritten. This could happen with C<map { for(...){...} } ...> and with lists containing C<do { for(...){...} }>. L<[perl #123286]|https://rt.perl.org/Ticket/Display.html?id=123286>. =item * C<scalar()> now propagates lvalue context, so that S<C<for(scalar($#foo)) { ... }>> can modify C<$#foo> through C<$_>. =item * C<qr/@array(?{block})/> no longer dies with "Bizarre copy of ARRAY". L<[perl #123344]|https://rt.perl.org/Ticket/Display.html?id=123344>. =item * S<C<eval '$variable'>> in nested named subroutines would sometimes look up a global variable even with a lexical variable in scope. =item * In perl 5.20.0, C<sort CORE::fake> where 'fake' is anything other than a keyword, started chopping off the last 6 characters and treating the result as a sort sub name. The previous behavior of treating C<CORE::fake> as a sort sub name has been restored. L<[perl #123410]|https://rt.perl.org/Ticket/Display.html?id=123410>. =item * Outside of C<use utf8>, a single-character Latin-1 lexical variable is disallowed. The error message for it, "Can't use global C<$foo>...", was giving garbage instead of the variable name. =item * C<readline> on a nonexistent handle was causing C<${^LAST_FH}> to produce a reference to an undefined scalar (or fail an assertion). Now C<${^LAST_FH}> ends up undefined. =item * C<(...) x ...> in void context now applies scalar context to the left-hand argument, instead of the context the current sub was called in. L<[perl #123020]|https://rt.perl.org/Ticket/Display.html?id=123020>. =back =head1 Known Problems =over 4 =item * C<pack>-ing a NaN on a perl compiled with Visual C 6 does not behave properly, leading to a test failure in F<t/op/infnan.t>. L<[perl 125203]|https://rt.perl.org/Ticket/Display.html?id=125203> =item * A goal is for Perl to be able to be recompiled to work reasonably well on any Unicode version. In Perl 5.22, though, the earliest such version is Unicode 5.1 (current is 7.0). =item * EBCDIC platforms =over 4 =item * The C<cmp> (and hence C<sort>) operators do not necessarily give the correct results when both operands are UTF-EBCDIC encoded strings and there is a mixture of ASCII and/or control characters, along with other characters. =item * Ranges containing C<\N{...}> in the C<tr///> (and C<y///>) transliteration operators are treated differently than the equivalent ranges in regular expression patterns. They should, but don't, cause the values in the ranges to all be treated as Unicode code points, and not native ones. (L<perlre/Version 8 Regular Expressions> gives details as to how it should work.) =item * Encode and encoding are mostly broken. =item * Many CPAN modules that are shipped with core show failing tests. =item * C<pack>/C<unpack> with C<"U0"> format may not work properly. =back =item * The following modules are known to have test failures with this version of Perl. In many cases, patches have been submitted, so there will hopefully be new releases soon: =over =item * L<B::Generate> version 1.50 =item * L<B::Utils> version 0.25 =item * L<Coro> version 6.42 =item * L<Dancer> version 1.3130 =item * L<Data::Alias> version 1.18 =item * L<Data::Dump::Streamer> version 2.38 =item * L<Data::Util> version 0.63 =item * L<Devel::Spy> version 0.07 =item * L<invoker> version 0.34 =item * L<Lexical::Var> version 0.009 =item * L<LWP::ConsoleLogger> version 0.000018 =item * L<Mason> version 2.22 =item * L<NgxQueue> version 0.02 =item * L<Padre> version 1.00 =item * L<Parse::Keyword> 0.08 =back =back =head1 Obituary Brian McCauley died on May 8, 2015. He was a frequent poster to Usenet, Perl Monks, and other Perl forums, and made several CPAN contributions under the nick NOBULL, including to the Perl FAQ. He attended almost every YAPC::Europe, and indeed, helped organise YAPC::Europe 2006 and the QA Hackathon 2009. His wit and his delight in intricate systems were particularly apparent in his love of board games; many Perl mongers will have fond memories of playing Fluxx and other games with Brian. He will be missed. =head1 Acknowledgements Perl 5.22.0 represents approximately 12 months of development since Perl 5.20.0 and contains approximately 590,000 lines of changes across 2,400 files from 94 authors. Excluding auto-generated files, documentation and release tools, there were approximately 370,000 lines of changes to 1,500 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.22.0: Aaron Crane, Abhijit Menon-Sen, Abigail, Alberto Simões, Alex Solovey, Alex Vandiver, Alexandr Ciornii, Alexandre (Midnite) Jousset, Andreas König, Andreas Voegele, Andrew Fresh, Andy Dougherty, Anthony Heading, Aristotle Pagaltzis, brian d foy, Brian Fraser, Chad Granum, Chris 'BinGOs' Williams, Craig A. Berry, Dagfinn Ilmari Mannsåker, Daniel Dragan, Darin McBride, Dave Rolsky, David Golden, David Mitchell, David Wheeler, Dmitri Tikhonov, Doug Bell, E. Choroba, Ed J, Eric Herman, Father Chrysostomos, George Greer, Glenn D. Golden, Graham Knop, H.Merijn Brand, Herbert Breunung, Hugo van der Sanden, James E Keenan, James McCoy, James Raspass, Jan Dubois, Jarkko Hietaniemi, Jasmine Ngan, Jerry D. Hedden, Jim Cromie, John Goodyear, kafka, Karen Etheridge, Karl Williamson, Kent Fredric, kmx, Lajos Veres, Leon Timmermans, Lukas Mai, Mathieu Arnold, Matthew Horsfall, Max Maischein, Michael Bunk, Nicholas Clark, Niels Thykier, Niko Tyni, Norman Koch, Olivier Mengué, Peter John Acklam, Peter Martini, Petr Písař, Philippe Bruhat (BooK), Pierre Bogossian, Rafael Garcia-Suarez, Randy Stauner, Reini Urban, Ricardo Signes, Rob Hoelz, Rostislav Skudnov, Sawyer X, Shirakata Kentaro, Shlomi Fish, Sisyphus, Slaven Rezic, Smylers, Steffen Müller, Steve Hay, Sullivan Beck, syber, Tadeusz Sośnierz, Thomas Sibley, Todd Rinaldo, Tony Cook, Vincent Pit, Vladimir Marek, Yaroslav Kuzmin, Yves Orton, Ævar Arnfjörð Bjarmason. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at L<https://rt.perl.org/>. There may also be information at L<http://www.perl.org/>, the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlvos.pod 0000644 00000007403 15125556335 0006760 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specially designed to be readable as is. =head1 NAME perlvos - Perl for Stratus OpenVOS =head1 SYNOPSIS This file contains notes for building perl on the Stratus OpenVOS operating system. Perl is a scripting or macro language that is popular on many systems. See L<perlbook> for a number of good books on Perl. These are instructions for building Perl from source. This version of Perl requires the dynamic linking support that is found in OpenVOS Release 17.1 and thus is not supported on OpenVOS Release 17.0 or earlier releases. If you are running VOS Release 14.4.1 or later, you can obtain a pre-compiled, supported copy of perl by purchasing the GNU Tools product from Stratus Technologies. =head1 BUILDING PERL FOR OPENVOS To build perl from its source code on the Stratus V Series platform you must have OpenVOS Release 17.1.0 or later, GNU Tools Release 3.5 or later, and the C/POSIX Runtime Libraries. Follow the normal instructions for building perl; e.g, enter bash, run the Configure script, then use "gmake" to build perl. =head1 INSTALLING PERL IN OPENVOS =over 4 =item 1 After you have built perl using the Configure script, ensure that you have modify and default write permission to C<< >system>ported >> and all subdirectories. Then type gmake install =item 2 While there are currently no architecture-specific extensions or modules distributed with perl, the following directories can be used to hold such files (replace the string VERSION by the appropriate version number): >system>ported>lib>perl5>VERSION>i786 =item 3 Site-specific perl extensions and modules can be installed in one of two places. Put architecture-independent files into: >system>ported>lib>perl5>site_perl>VERSION Put site-specific architecture-dependent files into one of the following directories: >system>ported>lib>perl5>site_perl>VERSION>i786 =item 4 You can examine the @INC variable from within a perl program to see the order in which Perl searches these directories. =back =head1 USING PERL IN OPENVOS =head2 Restrictions of Perl on OpenVOS This port of Perl version 5 prefers Unix-style, slash-separated pathnames over OpenVOS-style greater-than-separated pathnames. OpenVOS-style pathnames should work in most contexts, but if you have trouble, replace all greater-than characters by slash characters. Because the slash character is used as a pathname delimiter, Perl cannot process OpenVOS pathnames containing a slash character in a directory or file name; these must be renamed. This port of Perl also uses Unix-epoch date values internally. As long as you are dealing with ASCII character string representations of dates, this should not be an issue. The supported epoch is January 1, 1980 to January 17, 2038. See the file pod/perlport.pod for more information about the OpenVOS port of Perl. =head1 TEST STATUS A number of the perl self-tests fails for various reasons; generally these are minor and due to subtle differences between common POSIX-based environments and the OpenVOS POSIX environment. Ensure that you conduct sufficient testing of your code to guarantee that it works properly in the OpenVOS environment. =head1 SUPPORT STATUS I'm offering this port "as is". You can ask me questions, but I can't guarantee I'll be able to answer them. There are some excellent books available on the Perl language; consult a book seller. If you want a supported version of perl for OpenVOS, purchase the OpenVOS GNU Tools product from Stratus Technologies, along with a support contract (or from anyone else who will sell you support). =head1 AUTHOR Paul Green (Paul.Green@stratus.com) =head1 LAST UPDATE February 28, 2013 =cut perltodo.pod 0000644 00000000564 15125556335 0007117 0 ustar 00 =head1 NAME perltodo - Link to the Perl to-do list =head1 DESCRIPTION The Perl 5 to-do list is maintained in the git repository, and can be viewed at L<https://github.com/Perl/perl5/blob/blead/Porting/todo.pod>. (The to-do list used to be here in perltodo. That has stopped, as installing a snapshot that becomes increasingly out of date isn't that useful to anyone.) perlvar.pod 0000644 00000241221 15125556335 0006737 0 ustar 00 =head1 NAME perlvar - Perl predefined variables =head1 DESCRIPTION =head2 The Syntax of Variable Names Variable names in Perl can have several formats. Usually, they must begin with a letter or underscore, in which case they can be arbitrarily long (up to an internal limit of 251 characters) and may contain letters, digits, underscores, or the special sequence C<::> or C<'>. In this case, the part before the last C<::> or C<'> is taken to be a I<package qualifier>; see L<perlmod>. A Unicode letter that is not ASCII is not considered to be a letter unless S<C<"use utf8">> is in effect, and somewhat more complicated rules apply; see L<perldata/Identifier parsing> for details. Perl variable names may also be a sequence of digits, a single punctuation character, or the two-character sequence: C<^> (caret or CIRCUMFLEX ACCENT) followed by any one of the characters C<[][A-Z^_?\]>. These names are all reserved for special uses by Perl; for example, the all-digits names are used to hold data captured by backreferences after a regular expression match. Since Perl v5.6.0, Perl variable names may also be alphanumeric strings preceded by a caret. These must all be written in the form C<${^Foo}>; the braces are not optional. C<${^Foo}> denotes the scalar variable whose name is considered to be a control-C<F> followed by two C<o>'s. These variables are reserved for future special uses by Perl, except for the ones that begin with C<^_> (caret-underscore). No name that begins with C<^_> will acquire a special meaning in any future version of Perl; such names may therefore be used safely in programs. C<$^_> itself, however, I<is> reserved. Perl identifiers that begin with digits or punctuation characters are exempt from the effects of the C<package> declaration and are always forced to be in package C<main>; they are also exempt from C<strict 'vars'> errors. A few other names are also exempt in these ways: ENV STDIN INC STDOUT ARGV STDERR ARGVOUT SIG In particular, the special C<${^_XYZ}> variables are always taken to be in package C<main>, regardless of any C<package> declarations presently in scope. =head1 SPECIAL VARIABLES The following names have special meaning to Perl. Most punctuation names have reasonable mnemonics, or analogs in the shells. Nevertheless, if you wish to use long variable names, you need only say: use English; at the top of your program. This aliases all the short names to the long names in the current package. Some even have medium names, generally borrowed from B<awk>. For more info, please see L<English>. Before you continue, note the sort order for variables. In general, we first list the variables in case-insensitive, almost-lexigraphical order (ignoring the C<{> or C<^> preceding words, as in C<${^UNICODE}> or C<$^T>), although C<$_> and C<@_> move up to the top of the pile. For variables with the same identifier, we list it in order of scalar, array, hash, and bareword. =head2 General Variables =over 8 =item $ARG =item $_ X<$_> X<$ARG> The default input and pattern-searching space. The following pairs are equivalent: while (<>) {...} # equivalent only in while! while (defined($_ = <>)) {...} /^Subject:/ $_ =~ /^Subject:/ tr/a-z/A-Z/ $_ =~ tr/a-z/A-Z/ chomp chomp($_) Here are the places where Perl will assume C<$_> even if you don't use it: =over 3 =item * The following functions use C<$_> as a default argument: abs, alarm, chomp, chop, chr, chroot, cos, defined, eval, evalbytes, exp, fc, glob, hex, int, lc, lcfirst, length, log, lstat, mkdir, oct, ord, pos, print, printf, quotemeta, readlink, readpipe, ref, require, reverse (in scalar context only), rmdir, say, sin, split (for its second argument), sqrt, stat, study, uc, ucfirst, unlink, unpack. =item * All file tests (C<-f>, C<-d>) except for C<-t>, which defaults to STDIN. See L<perlfunc/-X> =item * The pattern matching operations C<m//>, C<s///> and C<tr///> (aka C<y///>) when used without an C<=~> operator. =item * The default iterator variable in a C<foreach> loop if no other variable is supplied. =item * The implicit iterator variable in the C<grep()> and C<map()> functions. =item * The implicit variable of C<given()>. =item * The default place to put the next value or input record when a C<< <FH> >>, C<readline>, C<readdir> or C<each> operation's result is tested by itself as the sole criterion of a C<while> test. Outside a C<while> test, this will not happen. =back C<$_> is a global variable. However, between perl v5.10.0 and v5.24.0, it could be used lexically by writing C<my $_>. Making C<$_> refer to the global C<$_> in the same scope was then possible with C<our $_>. This experimental feature was removed and is now a fatal error, but you may encounter it in older code. Mnemonic: underline is understood in certain operations. =item @ARG =item @_ X<@_> X<@ARG> Within a subroutine the array C<@_> contains the parameters passed to that subroutine. Inside a subroutine, C<@_> is the default array for the array operators C<pop> and C<shift>. See L<perlsub>. =item $LIST_SEPARATOR =item $" X<$"> X<$LIST_SEPARATOR> When an array or an array slice is interpolated into a double-quoted string or a similar context such as C</.../>, its elements are separated by this value. Default is a space. For example, this: print "The array is: @array\n"; is equivalent to this: print "The array is: " . join($", @array) . "\n"; Mnemonic: works in double-quoted context. =item $PROCESS_ID =item $PID =item $$ X<$$> X<$PID> X<$PROCESS_ID> The process number of the Perl running this script. Though you I<can> set this variable, doing so is generally discouraged, although it can be invaluable for some testing purposes. It will be reset automatically across C<fork()> calls. Note for Linux and Debian GNU/kFreeBSD users: Before Perl v5.16.0 perl would emulate POSIX semantics on Linux systems using LinuxThreads, a partial implementation of POSIX Threads that has since been superseded by the Native POSIX Thread Library (NPTL). LinuxThreads is now obsolete on Linux, and caching C<getpid()> like this made embedding perl unnecessarily complex (since you'd have to manually update the value of $$), so now C<$$> and C<getppid()> will always return the same values as the underlying C library. Debian GNU/kFreeBSD systems also used LinuxThreads up until and including the 6.0 release, but after that moved to FreeBSD thread semantics, which are POSIX-like. To see if your system is affected by this discrepancy check if C<getconf GNU_LIBPTHREAD_VERSION | grep -q NPTL> returns a false value. NTPL threads preserve the POSIX semantics. Mnemonic: same as shells. =item $PROGRAM_NAME =item $0 X<$0> X<$PROGRAM_NAME> Contains the name of the program being executed. On some (but not all) operating systems assigning to C<$0> modifies the argument area that the C<ps> program sees. On some platforms you may have to use special C<ps> options or a different C<ps> to see the changes. Modifying the C<$0> is more useful as a way of indicating the current program state than it is for hiding the program you're running. Note that there are platform-specific limitations on the maximum length of C<$0>. In the most extreme case it may be limited to the space occupied by the original C<$0>. In some platforms there may be arbitrary amount of padding, for example space characters, after the modified name as shown by C<ps>. In some platforms this padding may extend all the way to the original length of the argument area, no matter what you do (this is the case for example with Linux 2.2). Note for BSD users: setting C<$0> does not completely remove "perl" from the ps(1) output. For example, setting C<$0> to C<"foobar"> may result in C<"perl: foobar (perl)"> (whether both the C<"perl: "> prefix and the " (perl)" suffix are shown depends on your exact BSD variant and version). This is an operating system feature, Perl cannot help it. In multithreaded scripts Perl coordinates the threads so that any thread may modify its copy of the C<$0> and the change becomes visible to ps(1) (assuming the operating system plays along). Note that the view of C<$0> the other threads have will not change since they have their own copies of it. If the program has been given to perl via the switches C<-e> or C<-E>, C<$0> will contain the string C<"-e">. On Linux as of perl v5.14.0 the legacy process name will be set with C<prctl(2)>, in addition to altering the POSIX name via C<argv[0]> as perl has done since version 4.000. Now system utilities that read the legacy process name such as ps, top and killall will recognize the name you set when assigning to C<$0>. The string you supply will be cut off at 16 bytes, this is a limitation imposed by Linux. Mnemonic: same as B<sh> and B<ksh>. =item $REAL_GROUP_ID =item $GID =item $( X<$(> X<$GID> X<$REAL_GROUP_ID> The real gid of this process. If you are on a machine that supports membership in multiple groups simultaneously, gives a space separated list of groups you are in. The first number is the one returned by C<getgid()>, and the subsequent ones by C<getgroups()>, one of which may be the same as the first number. However, a value assigned to C<$(> must be a single number used to set the real gid. So the value given by C<$(> should I<not> be assigned back to C<$(> without being forced numeric, such as by adding zero. Note that this is different to the effective gid (C<$)>) which does take a list. You can change both the real gid and the effective gid at the same time by using C<POSIX::setgid()>. Changes to C<$(> require a check to C<$!> to detect any possible errors after an attempted change. Mnemonic: parentheses are used to I<group> things. The real gid is the group you I<left>, if you're running setgid. =item $EFFECTIVE_GROUP_ID =item $EGID =item $) X<$)> X<$EGID> X<$EFFECTIVE_GROUP_ID> The effective gid of this process. If you are on a machine that supports membership in multiple groups simultaneously, gives a space separated list of groups you are in. The first number is the one returned by C<getegid()>, and the subsequent ones by C<getgroups()>, one of which may be the same as the first number. Similarly, a value assigned to C<$)> must also be a space-separated list of numbers. The first number sets the effective gid, and the rest (if any) are passed to C<setgroups()>. To get the effect of an empty list for C<setgroups()>, just repeat the new effective gid; that is, to force an effective gid of 5 and an effectively empty C<setgroups()> list, say C< $) = "5 5" >. You can change both the effective gid and the real gid at the same time by using C<POSIX::setgid()> (use only a single numeric argument). Changes to C<$)> require a check to C<$!> to detect any possible errors after an attempted change. C<< $< >>, C<< $> >>, C<$(> and C<$)> can be set only on machines that support the corresponding I<set[re][ug]id()> routine. C<$(> and C<$)> can be swapped only on machines supporting C<setregid()>. Mnemonic: parentheses are used to I<group> things. The effective gid is the group that's I<right> for you, if you're running setgid. =item $REAL_USER_ID =item $UID =item $< X<< $< >> X<$UID> X<$REAL_USER_ID> The real uid of this process. You can change both the real uid and the effective uid at the same time by using C<POSIX::setuid()>. Since changes to C<< $< >> require a system call, check C<$!> after a change attempt to detect any possible errors. Mnemonic: it's the uid you came I<from>, if you're running setuid. =item $EFFECTIVE_USER_ID =item $EUID =item $> X<< $> >> X<$EUID> X<$EFFECTIVE_USER_ID> The effective uid of this process. For example: $< = $>; # set real to effective uid ($<,$>) = ($>,$<); # swap real and effective uids You can change both the effective uid and the real uid at the same time by using C<POSIX::setuid()>. Changes to C<< $> >> require a check to C<$!> to detect any possible errors after an attempted change. C<< $< >> and C<< $> >> can be swapped only on machines supporting C<setreuid()>. Mnemonic: it's the uid you went I<to>, if you're running setuid. =item $SUBSCRIPT_SEPARATOR =item $SUBSEP =item $; X<$;> X<$SUBSEP> X<SUBSCRIPT_SEPARATOR> The subscript separator for multidimensional array emulation. If you refer to a hash element as $foo{$x,$y,$z} it really means $foo{join($;, $x, $y, $z)} But don't put @foo{$x,$y,$z} # a slice--note the @ which means ($foo{$x},$foo{$y},$foo{$z}) Default is "\034", the same as SUBSEP in B<awk>. If your keys contain binary data there might not be any safe value for C<$;>. Consider using "real" multidimensional arrays as described in L<perllol>. Mnemonic: comma (the syntactic subscript separator) is a semi-semicolon. =item $a =item $b X<$a> X<$b> Special package variables when using C<sort()>, see L<perlfunc/sort>. Because of this specialness C<$a> and C<$b> don't need to be declared (using C<use vars>, or C<our()>) even when using the C<strict 'vars'> pragma. Don't lexicalize them with C<my $a> or C<my $b> if you want to be able to use them in the C<sort()> comparison block or function. =item %ENV X<%ENV> The hash C<%ENV> contains your current environment. Setting a value in C<ENV> changes the environment for any child processes you subsequently C<fork()> off. As of v5.18.0, both keys and values stored in C<%ENV> are stringified. my $foo = 1; $ENV{'bar'} = \$foo; if( ref $ENV{'bar'} ) { say "Pre 5.18.0 Behaviour"; } else { say "Post 5.18.0 Behaviour"; } Previously, only child processes received stringified values: my $foo = 1; $ENV{'bar'} = \$foo; # Always printed 'non ref' system($^X, '-e', q/print ( ref $ENV{'bar'} ? 'ref' : 'non ref' ) /); This happens because you can't really share arbitrary data structures with foreign processes. =item $OLD_PERL_VERSION =item $] X<$]> X<$OLD_PERL_VERSION> The revision, version, and subversion of the Perl interpreter, represented as a decimal of the form 5.XXXYYY, where XXX is the version / 1e3 and YYY is the subversion / 1e6. For example, Perl v5.10.1 would be "5.010001". This variable can be used to determine whether the Perl interpreter executing a script is in the right range of versions: warn "No PerlIO!\n" if "$]" < 5.008; When comparing C<$]>, numeric comparison operators should be used, but the variable should be stringified first to avoid issues where its original numeric value is inaccurate. See also the documentation of C<use VERSION> and C<require VERSION> for a convenient way to fail if the running Perl interpreter is too old. See L</$^V> for a representation of the Perl version as a L<version> object, which allows more flexible string comparisons. The main advantage of C<$]> over C<$^V> is that it works the same on any version of Perl. The disadvantages are that it can't easily be compared to versions in other formats (e.g. literal v-strings, "v1.2.3" or version objects) and numeric comparisons are subject to the binary floating point representation; it's good for numeric literal version checks and bad for comparing to a variable that hasn't been sanity-checked. The C<$OLD_PERL_VERSION> form was added in Perl v5.20.0 for historical reasons but its use is discouraged. (If your reason to use C<$]> is to run code on old perls then referring to it as C<$OLD_PERL_VERSION> would be self-defeating.) Mnemonic: Is this version of perl in the right bracket? =item $SYSTEM_FD_MAX =item $^F X<$^F> X<$SYSTEM_FD_MAX> The maximum system file descriptor, ordinarily 2. System file descriptors are passed to C<exec()>ed processes, while higher file descriptors are not. Also, during an C<open()>, system file descriptors are preserved even if the C<open()> fails (ordinary file descriptors are closed before the C<open()> is attempted). The close-on-exec status of a file descriptor will be decided according to the value of C<$^F> when the corresponding file, pipe, or socket was opened, not the time of the C<exec()>. =item @F X<@F> The array C<@F> contains the fields of each line read in when autosplit mode is turned on. See L<perlrun|perlrun/-a> for the B<-a> switch. This array is package-specific, and must be declared or given a full package name if not in package main when running under C<strict 'vars'>. =item @INC X<@INC> The array C<@INC> contains the list of places that the C<do EXPR>, C<require>, or C<use> constructs look for their library files. It initially consists of the arguments to any B<-I> command-line switches, followed by the default Perl library, probably F</usr/local/lib/perl>. Prior to Perl 5.26, C<.> -which represents the current directory, was included in C<@INC>; it has been removed. This change in behavior is documented in L<C<PERL_USE_UNSAFE_INC>|perlrun/PERL_USE_UNSAFE_INC> and it is not recommended that C<.> be re-added to C<@INC>. If you need to modify C<@INC> at runtime, you should use the C<use lib> pragma to get the machine-dependent library properly loaded as well: use lib '/mypath/libdir/'; use SomeMod; You can also insert hooks into the file inclusion system by putting Perl code directly into C<@INC>. Those hooks may be subroutine references, array references or blessed objects. See L<perlfunc/require> for details. =item %INC X<%INC> The hash C<%INC> contains entries for each filename included via the C<do>, C<require>, or C<use> operators. The key is the filename you specified (with module names converted to pathnames), and the value is the location of the file found. The C<require> operator uses this hash to determine whether a particular file has already been included. If the file was loaded via a hook (e.g. a subroutine reference, see L<perlfunc/require> for a description of these hooks), this hook is by default inserted into C<%INC> in place of a filename. Note, however, that the hook may have set the C<%INC> entry by itself to provide some more specific info. =item $INPLACE_EDIT =item $^I X<$^I> X<$INPLACE_EDIT> The current value of the inplace-edit extension. Use C<undef> to disable inplace editing. Mnemonic: value of B<-i> switch. =item @ISA X<@ISA> Each package contains a special array called C<@ISA> which contains a list of that class's parent classes, if any. This array is simply a list of scalars, each of which is a string that corresponds to a package name. The array is examined when Perl does method resolution, which is covered in L<perlobj>. To load packages while adding them to C<@ISA>, see the L<parent> pragma. The discouraged L<base> pragma does this as well, but should not be used except when compatibility with the discouraged L<fields> pragma is required. =item $^M X<$^M> By default, running out of memory is an untrappable, fatal error. However, if suitably built, Perl can use the contents of C<$^M> as an emergency memory pool after C<die()>ing. Suppose that your Perl were compiled with C<-DPERL_EMERGENCY_SBRK> and used Perl's malloc. Then $^M = 'a' x (1 << 16); would allocate a 64K buffer for use in an emergency. See the F<INSTALL> file in the Perl distribution for information on how to add custom C compilation flags when compiling perl. To discourage casual use of this advanced feature, there is no L<English|English> long name for this variable. This variable was added in Perl 5.004. =item $OSNAME =item $^O X<$^O> X<$OSNAME> The name of the operating system under which this copy of Perl was built, as determined during the configuration process. For examples see L<perlport/PLATFORMS>. The value is identical to C<$Config{'osname'}>. See also L<Config> and the B<-V> command-line switch documented in L<perlrun|perlrun/-V>. In Windows platforms, C<$^O> is not very helpful: since it is always C<MSWin32>, it doesn't tell the difference between 95/98/ME/NT/2000/XP/CE/.NET. Use C<Win32::GetOSName()> or Win32::GetOSVersion() (see L<Win32> and L<perlport>) to distinguish between the variants. This variable was added in Perl 5.003. =item %SIG X<%SIG> The hash C<%SIG> contains signal handlers for signals. For example: sub handler { # 1st argument is signal name my($sig) = @_; print "Caught a SIG$sig--shutting down\n"; close(LOG); exit(0); } $SIG{'INT'} = \&handler; $SIG{'QUIT'} = \&handler; ... $SIG{'INT'} = 'DEFAULT'; # restore default action $SIG{'QUIT'} = 'IGNORE'; # ignore SIGQUIT Using a value of C<'IGNORE'> usually has the effect of ignoring the signal, except for the C<CHLD> signal. See L<perlipc> for more about this special case. Using an empty string or C<undef> as the value has the same effect as C<'DEFAULT'>. Here are some other examples: $SIG{"PIPE"} = "Plumber"; # assumes main::Plumber (not # recommended) $SIG{"PIPE"} = \&Plumber; # just fine; assume current # Plumber $SIG{"PIPE"} = *Plumber; # somewhat esoteric $SIG{"PIPE"} = Plumber(); # oops, what did Plumber() # return?? Be sure not to use a bareword as the name of a signal handler, lest you inadvertently call it. Using a string that doesn't correspond to any existing function or a glob that doesn't contain a code slot is equivalent to C<'IGNORE'>, but a warning is emitted when the handler is being called (the warning is not emitted for the internal hooks described below). If your system has the C<sigaction()> function then signal handlers are installed using it. This means you get reliable signal handling. The default delivery policy of signals changed in Perl v5.8.0 from immediate (also known as "unsafe") to deferred, also known as "safe signals". See L<perlipc> for more information. Certain internal hooks can be also set using the C<%SIG> hash. The routine indicated by C<$SIG{__WARN__}> is called when a warning message is about to be printed. The warning message is passed as the first argument. The presence of a C<__WARN__> hook causes the ordinary printing of warnings to C<STDERR> to be suppressed. You can use this to save warnings in a variable, or turn warnings into fatal errors, like this: local $SIG{__WARN__} = sub { die $_[0] }; eval $proggie; As the C<'IGNORE'> hook is not supported by C<__WARN__>, its effect is the same as using C<'DEFAULT'>. You can disable warnings using the empty subroutine: local $SIG{__WARN__} = sub {}; The routine indicated by C<$SIG{__DIE__}> is called when a fatal exception is about to be thrown. The error message is passed as the first argument. When a C<__DIE__> hook routine returns, the exception processing continues as it would have in the absence of the hook, unless the hook routine itself exits via a C<goto &sub>, a loop exit, or a C<die()>. The C<__DIE__> handler is explicitly disabled during the call, so that you can die from a C<__DIE__> handler. Similarly for C<__WARN__>. The C<$SIG{__DIE__}> hook is called even inside an C<eval()>. It was never intended to happen this way, but an implementation glitch made this possible. This used to be deprecated, as it allowed strange action at a distance like rewriting a pending exception in C<$@>. Plans to rectify this have been scrapped, as users found that rewriting a pending exception is actually a useful feature, and not a bug. The C<$SIG{__DIE__}> doesn't support C<'IGNORE'>; it has the same effect as C<'DEFAULT'>. C<__DIE__>/C<__WARN__> handlers are very special in one respect: they may be called to report (probable) errors found by the parser. In such a case the parser may be in inconsistent state, so any attempt to evaluate Perl code from such a handler will probably result in a segfault. This means that warnings or errors that result from parsing Perl should be used with extreme caution, like this: require Carp if defined $^S; Carp::confess("Something wrong") if defined &Carp::confess; die "Something wrong, but could not load Carp to give " . "backtrace...\n\t" . "To see backtrace try starting Perl with -MCarp switch"; Here the first line will load C<Carp> I<unless> it is the parser who called the handler. The second line will print backtrace and die if C<Carp> was available. The third line will be executed only if C<Carp> was not available. Having to even think about the C<$^S> variable in your exception handlers is simply wrong. C<$SIG{__DIE__}> as currently implemented invites grievous and difficult to track down errors. Avoid it and use an C<END{}> or CORE::GLOBAL::die override instead. See L<perlfunc/die>, L<perlfunc/warn>, L<perlfunc/eval>, and L<warnings> for additional information. =item $BASETIME =item $^T X<$^T> X<$BASETIME> The time at which the program began running, in seconds since the epoch (beginning of 1970). The values returned by the B<-M>, B<-A>, and B<-C> filetests are based on this value. =item $PERL_VERSION =item $^V X<$^V> X<$PERL_VERSION> =for comment These are documented in the generated file lib/Config.pod. This looks like as good a place as any to give notice that they are documented. =for apidoc hAmn|int|PERL_VERSION =for apidoc hAmn|int|PERL_REVISION =for apidoc hAmn|int|PERL_SUBVERSION The revision, version, and subversion of the Perl interpreter, represented as a L<version> object. This variable first appeared in perl v5.6.0; earlier versions of perl will see an undefined value. Before perl v5.10.0 C<$^V> was represented as a v-string rather than a L<version> object. C<$^V> can be used to determine whether the Perl interpreter executing a script is in the right range of versions. For example: warn "Hashes not randomized!\n" if !$^V or $^V lt v5.8.1 While version objects overload stringification, to portably convert C<$^V> into its string representation, use C<sprintf()>'s C<"%vd"> conversion, which works for both v-strings or version objects: printf "version is v%vd\n", $^V; # Perl's version See the documentation of C<use VERSION> and C<require VERSION> for a convenient way to fail if the running Perl interpreter is too old. See also C<L</$]>> for a decimal representation of the Perl version. The main advantage of C<$^V> over C<$]> is that, for Perl v5.10.0 or later, it overloads operators, allowing easy comparison against other version representations (e.g. decimal, literal v-string, "v1.2.3", or objects). The disadvantage is that prior to v5.10.0, it was only a literal v-string, which can't be easily printed or compared, whereas the behavior of C<$]> is unchanged on all versions of Perl. Mnemonic: use ^V for a version object. =item ${^WIN32_SLOPPY_STAT} X<${^WIN32_SLOPPY_STAT}> X<sitecustomize> X<sitecustomize.pl> If this variable is set to a true value, then C<stat()> on Windows will not try to open the file. This means that the link count cannot be determined and file attributes may be out of date if additional hardlinks to the file exist. On the other hand, not opening the file is considerably faster, especially for files on network drives. This variable could be set in the F<sitecustomize.pl> file to configure the local Perl installation to use "sloppy" C<stat()> by default. See the documentation for B<-f> in L<perlrun|perlrun/-f> for more information about site customization. This variable was added in Perl v5.10.0. =item $EXECUTABLE_NAME =item $^X X<$^X> X<$EXECUTABLE_NAME> The name used to execute the current copy of Perl, from C's C<argv[0]> or (where supported) F</proc/self/exe>. Depending on the host operating system, the value of C<$^X> may be a relative or absolute pathname of the perl program file, or may be the string used to invoke perl but not the pathname of the perl program file. Also, most operating systems permit invoking programs that are not in the PATH environment variable, so there is no guarantee that the value of C<$^X> is in PATH. For VMS, the value may or may not include a version number. You usually can use the value of C<$^X> to re-invoke an independent copy of the same perl that is currently running, e.g., @first_run = `$^X -le "print int rand 100 for 1..100"`; But recall that not all operating systems support forking or capturing of the output of commands, so this complex statement may not be portable. It is not safe to use the value of C<$^X> as a path name of a file, as some operating systems that have a mandatory suffix on executable files do not require use of the suffix when invoking a command. To convert the value of C<$^X> to a path name, use the following statements: # Build up a set of file names (not command names). use Config; my $this_perl = $^X; if ($^O ne 'VMS') { $this_perl .= $Config{_exe} unless $this_perl =~ m/$Config{_exe}$/i; } Because many operating systems permit anyone with read access to the Perl program file to make a copy of it, patch the copy, and then execute the copy, the security-conscious Perl programmer should take care to invoke the installed copy of perl, not the copy referenced by C<$^X>. The following statements accomplish this goal, and produce a pathname that can be invoked as a command or referenced as a file. use Config; my $secure_perl_path = $Config{perlpath}; if ($^O ne 'VMS') { $secure_perl_path .= $Config{_exe} unless $secure_perl_path =~ m/$Config{_exe}$/i; } =back =head2 Variables related to regular expressions Most of the special variables related to regular expressions are side effects. Perl sets these variables when it has a successful match, so you should check the match result before using them. For instance: if( /P(A)TT(ER)N/ ) { print "I found $1 and $2\n"; } These variables are read-only and dynamically-scoped, unless we note otherwise. The dynamic nature of the regular expression variables means that their value is limited to the block that they are in, as demonstrated by this bit of code: my $outer = 'Wallace and Grommit'; my $inner = 'Mutt and Jeff'; my $pattern = qr/(\S+) and (\S+)/; sub show_n { print "\$1 is $1; \$2 is $2\n" } { OUTER: show_n() if $outer =~ m/$pattern/; INNER: { show_n() if $inner =~ m/$pattern/; } show_n(); } The output shows that while in the C<OUTER> block, the values of C<$1> and C<$2> are from the match against C<$outer>. Inside the C<INNER> block, the values of C<$1> and C<$2> are from the match against C<$inner>, but only until the end of the block (i.e. the dynamic scope). After the C<INNER> block completes, the values of C<$1> and C<$2> return to the values for the match against C<$outer> even though we have not made another match: $1 is Wallace; $2 is Grommit $1 is Mutt; $2 is Jeff $1 is Wallace; $2 is Grommit =head3 Performance issues Traditionally in Perl, any use of any of the three variables C<$`>, C<$&> or C<$'> (or their C<use English> equivalents) anywhere in the code, caused all subsequent successful pattern matches to make a copy of the matched string, in case the code might subsequently access one of those variables. This imposed a considerable performance penalty across the whole program, so generally the use of these variables has been discouraged. In Perl 5.6.0 the C<@-> and C<@+> dynamic arrays were introduced that supply the indices of successful matches. So you could for example do this: $str =~ /pattern/; print $`, $&, $'; # bad: performance hit print # good: no performance hit substr($str, 0, $-[0]), substr($str, $-[0], $+[0]-$-[0]), substr($str, $+[0]); In Perl 5.10.0 the C</p> match operator flag and the C<${^PREMATCH}>, C<${^MATCH}>, and C<${^POSTMATCH}> variables were introduced, that allowed you to suffer the penalties only on patterns marked with C</p>. In Perl 5.18.0 onwards, perl started noting the presence of each of the three variables separately, and only copied that part of the string required; so in $`; $&; "abcdefgh" =~ /d/ perl would only copy the "abcd" part of the string. That could make a big difference in something like $str = 'x' x 1_000_000; $&; # whoops $str =~ /x/g # one char copied a million times, not a million chars In Perl 5.20.0 a new copy-on-write system was enabled by default, which finally fixes all performance issues with these three variables, and makes them safe to use anywhere. The C<Devel::NYTProf> and C<Devel::FindAmpersand> modules can help you find uses of these problematic match variables in your code. =over 8 =item $<I<digits>> ($1, $2, ...) X<$1> X<$2> X<$3> X<$I<digits>> Contains the subpattern from the corresponding set of capturing parentheses from the last successful pattern match, not counting patterns matched in nested blocks that have been exited already. Note there is a distinction between a capture buffer which matches the empty string a capture buffer which is optional. Eg, C<(x?)> and C<(x)?> The latter may be undef, the former not. These variables are read-only and dynamically-scoped. Mnemonic: like \digits. =item @{^CAPTURE} X<@{^CAPTURE}> X<@^CAPTURE> An array which exposes the contents of the capture buffers, if any, of the last successful pattern match, not counting patterns matched in nested blocks that have been exited already. Note that the 0 index of @{^CAPTURE} is equivalent to $1, the 1 index is equivalent to $2, etc. if ("foal"=~/(.)(.)(.)(.)/) { print join "-", @{^CAPTURE}; } should output "f-o-a-l". See also L<<< /$<I<digits>> ($1, $2, ...) >>>, L</%{^CAPTURE}> and L</%{^CAPTURE_ALL}>. Note that unlike most other regex magic variables there is no single letter equivalent to C<@{^CAPTURE}>. This variable was added in 5.25.7 =item $MATCH =item $& X<$&> X<$MATCH> The string matched by the last successful pattern match (not counting any matches hidden within a BLOCK or C<eval()> enclosed by the current BLOCK). See L</Performance issues> above for the serious performance implications of using this variable (even once) in your code. This variable is read-only and dynamically-scoped. Mnemonic: like C<&> in some editors. =item ${^MATCH} X<${^MATCH}> This is similar to C<$&> (C<$MATCH>) except that it does not incur the performance penalty associated with that variable. See L</Performance issues> above. In Perl v5.18 and earlier, it is only guaranteed to return a defined value when the pattern was compiled or executed with the C</p> modifier. In Perl v5.20, the C</p> modifier does nothing, so C<${^MATCH}> does the same thing as C<$MATCH>. This variable was added in Perl v5.10.0. This variable is read-only and dynamically-scoped. =item $PREMATCH =item $` X<$`> X<$PREMATCH> X<${^PREMATCH}> The string preceding whatever was matched by the last successful pattern match, not counting any matches hidden within a BLOCK or C<eval> enclosed by the current BLOCK. See L</Performance issues> above for the serious performance implications of using this variable (even once) in your code. This variable is read-only and dynamically-scoped. Mnemonic: C<`> often precedes a quoted string. =item ${^PREMATCH} X<$`> X<${^PREMATCH}> This is similar to C<$`> ($PREMATCH) except that it does not incur the performance penalty associated with that variable. See L</Performance issues> above. In Perl v5.18 and earlier, it is only guaranteed to return a defined value when the pattern was compiled or executed with the C</p> modifier. In Perl v5.20, the C</p> modifier does nothing, so C<${^PREMATCH}> does the same thing as C<$PREMATCH>. This variable was added in Perl v5.10.0. This variable is read-only and dynamically-scoped. =item $POSTMATCH =item $' X<$'> X<$POSTMATCH> X<${^POSTMATCH}> X<@-> The string following whatever was matched by the last successful pattern match (not counting any matches hidden within a BLOCK or C<eval()> enclosed by the current BLOCK). Example: local $_ = 'abcdefghi'; /def/; print "$`:$&:$'\n"; # prints abc:def:ghi See L</Performance issues> above for the serious performance implications of using this variable (even once) in your code. This variable is read-only and dynamically-scoped. Mnemonic: C<'> often follows a quoted string. =item ${^POSTMATCH} X<${^POSTMATCH}> X<$'> X<$POSTMATCH> This is similar to C<$'> (C<$POSTMATCH>) except that it does not incur the performance penalty associated with that variable. See L</Performance issues> above. In Perl v5.18 and earlier, it is only guaranteed to return a defined value when the pattern was compiled or executed with the C</p> modifier. In Perl v5.20, the C</p> modifier does nothing, so C<${^POSTMATCH}> does the same thing as C<$POSTMATCH>. This variable was added in Perl v5.10.0. This variable is read-only and dynamically-scoped. =item $LAST_PAREN_MATCH =item $+ X<$+> X<$LAST_PAREN_MATCH> The text matched by the highest used capture group of the last successful search pattern. It is logically equivalent to the highest numbered capture variable (C<$1>, C<$2>, ...) which has a defined value. This is useful if you don't know which one of a set of alternative patterns matched. For example: /Version: (.*)|Revision: (.*)/ && ($rev = $+); This variable is read-only and dynamically-scoped. Mnemonic: be positive and forward looking. =item $LAST_SUBMATCH_RESULT =item $^N X<$^N> X<$LAST_SUBMATCH_RESULT> The text matched by the used group most-recently closed (i.e. the group with the rightmost closing parenthesis) of the last successful search pattern. This is subtly different from C<$+>. For example in "ab" =~ /^((.)(.))$/ we have $1,$^N have the value "ab" $2 has the value "a" $3,$+ have the value "b" This is primarily used inside C<(?{...})> blocks for examining text recently matched. For example, to effectively capture text to a variable (in addition to C<$1>, C<$2>, etc.), replace C<(...)> with (?:(...)(?{ $var = $^N })) By setting and then using C<$var> in this way relieves you from having to worry about exactly which numbered set of parentheses they are. This variable was added in Perl v5.8.0. Mnemonic: the (possibly) Nested parenthesis that most recently closed. =item @LAST_MATCH_END =item @+ X<@+> X<@LAST_MATCH_END> This array holds the offsets of the ends of the last successful submatches in the currently active dynamic scope. C<$+[0]> is the offset into the string of the end of the entire match. This is the same value as what the C<pos> function returns when called on the variable that was matched against. The I<n>th element of this array holds the offset of the I<n>th submatch, so C<$+[1]> is the offset past where C<$1> ends, C<$+[2]> the offset past where C<$2> ends, and so on. You can use C<$#+> to determine how many subgroups were in the last successful match. See the examples given for the C<@-> variable. This variable was added in Perl v5.6.0. =item %{^CAPTURE} =item %LAST_PAREN_MATCH =item %+ X<%+> X<%LAST_PAREN_MATCH> X<%{^CAPTURE}> Similar to C<@+>, the C<%+> hash allows access to the named capture buffers, should they exist, in the last successful match in the currently active dynamic scope. For example, C<$+{foo}> is equivalent to C<$1> after the following match: 'foo' =~ /(?<foo>foo)/; The keys of the C<%+> hash list only the names of buffers that have captured (and that are thus associated to defined values). If multiple distinct capture groups have the same name, then C<$+{NAME}> will refer to the leftmost defined group in the match. The underlying behaviour of C<%+> is provided by the L<Tie::Hash::NamedCapture> module. B<Note:> C<%-> and C<%+> are tied views into a common internal hash associated with the last successful regular expression. Therefore mixing iterative access to them via C<each> may have unpredictable results. Likewise, if the last successful match changes, then the results may be surprising. This variable was added in Perl v5.10.0. The C<%{^CAPTURE}> alias was added in 5.25.7. This variable is read-only and dynamically-scoped. =item @LAST_MATCH_START =item @- X<@-> X<@LAST_MATCH_START> C<$-[0]> is the offset of the start of the last successful match. C<$-[I<n>]> is the offset of the start of the substring matched by I<n>-th subpattern, or undef if the subpattern did not match. Thus, after a match against C<$_>, C<$&> coincides with C<substr $_, $-[0], $+[0] - $-[0]>. Similarly, $I<n> coincides with C<substr $_, $-[n], $+[n] - $-[n]> if C<$-[n]> is defined, and $+ coincides with C<substr $_, $-[$#-], $+[$#-] - $-[$#-]>. One can use C<$#-> to find the last matched subgroup in the last successful match. Contrast with C<$#+>, the number of subgroups in the regular expression. Compare with C<@+>. This array holds the offsets of the beginnings of the last successful submatches in the currently active dynamic scope. C<$-[0]> is the offset into the string of the beginning of the entire match. The I<n>th element of this array holds the offset of the I<n>th submatch, so C<$-[1]> is the offset where C<$1> begins, C<$-[2]> the offset where C<$2> begins, and so on. After a match against some variable C<$var>: =over 5 =item C<$`> is the same as C<substr($var, 0, $-[0])> =item C<$&> is the same as C<substr($var, $-[0], $+[0] - $-[0])> =item C<$'> is the same as C<substr($var, $+[0])> =item C<$1> is the same as C<substr($var, $-[1], $+[1] - $-[1])> =item C<$2> is the same as C<substr($var, $-[2], $+[2] - $-[2])> =item C<$3> is the same as C<substr($var, $-[3], $+[3] - $-[3])> =back This variable was added in Perl v5.6.0. =item %{^CAPTURE_ALL} X<%{^CAPTURE_ALL}> =item %- X<%-> Similar to C<%+>, this variable allows access to the named capture groups in the last successful match in the currently active dynamic scope. To each capture group name found in the regular expression, it associates a reference to an array containing the list of values captured by all buffers with that name (should there be several of them), in the order where they appear. Here's an example: if ('1234' =~ /(?<A>1)(?<B>2)(?<A>3)(?<B>4)/) { foreach my $bufname (sort keys %-) { my $ary = $-{$bufname}; foreach my $idx (0..$#$ary) { print "\$-{$bufname}[$idx] : ", (defined($ary->[$idx]) ? "'$ary->[$idx]'" : "undef"), "\n"; } } } would print out: $-{A}[0] : '1' $-{A}[1] : '3' $-{B}[0] : '2' $-{B}[1] : '4' The keys of the C<%-> hash correspond to all buffer names found in the regular expression. The behaviour of C<%-> is implemented via the L<Tie::Hash::NamedCapture> module. B<Note:> C<%-> and C<%+> are tied views into a common internal hash associated with the last successful regular expression. Therefore mixing iterative access to them via C<each> may have unpredictable results. Likewise, if the last successful match changes, then the results may be surprising. This variable was added in Perl v5.10.0. The C<%{^CAPTURE_ALL}> alias was added in 5.25.7. This variable is read-only and dynamically-scoped. =item $LAST_REGEXP_CODE_RESULT =item $^R X<$^R> X<$LAST_REGEXP_CODE_RESULT> The result of evaluation of the last successful C<(?{ code })> regular expression assertion (see L<perlre>). May be written to. This variable was added in Perl 5.005. =item ${^RE_COMPILE_RECURSION_LIMIT} X<${^RE_COMPILE_RECURSION_LIMIT}> The current value giving the maximum number of open but unclosed parenthetical groups there may be at any point during a regular expression compilation. The default is currently 1000 nested groups. You may adjust it depending on your needs and the amount of memory available. This variable was added in Perl v5.30.0. =item ${^RE_DEBUG_FLAGS} X<${^RE_DEBUG_FLAGS}> The current value of the regex debugging flags. Set to 0 for no debug output even when the C<re 'debug'> module is loaded. See L<re> for details. This variable was added in Perl v5.10.0. =item ${^RE_TRIE_MAXBUF} X<${^RE_TRIE_MAXBUF}> Controls how certain regex optimisations are applied and how much memory they utilize. This value by default is 65536 which corresponds to a 512kB temporary cache. Set this to a higher value to trade memory for speed when matching large alternations. Set it to a lower value if you want the optimisations to be as conservative of memory as possible but still occur, and set it to a negative value to prevent the optimisation and conserve the most memory. Under normal situations this variable should be of no interest to you. This variable was added in Perl v5.10.0. =back =head2 Variables related to filehandles Variables that depend on the currently selected filehandle may be set by calling an appropriate object method on the C<IO::Handle> object, although this is less efficient than using the regular built-in variables. (Summary lines below for this contain the word HANDLE.) First you must say use IO::Handle; after which you may use either method HANDLE EXPR or more safely, HANDLE->method(EXPR) Each method returns the old value of the C<IO::Handle> attribute. The methods each take an optional EXPR, which, if supplied, specifies the new value for the C<IO::Handle> attribute in question. If not supplied, most methods do nothing to the current value--except for C<autoflush()>, which will assume a 1 for you, just to be different. Because loading in the C<IO::Handle> class is an expensive operation, you should learn how to use the regular built-in variables. A few of these variables are considered "read-only". This means that if you try to assign to this variable, either directly or indirectly through a reference, you'll raise a run-time exception. You should be very careful when modifying the default values of most special variables described in this document. In most cases you want to localize these variables before changing them, since if you don't, the change may affect other modules which rely on the default values of the special variables that you have changed. This is one of the correct ways to read the whole file at once: open my $fh, "<", "foo" or die $!; local $/; # enable localized slurp mode my $content = <$fh>; close $fh; But the following code is quite bad: open my $fh, "<", "foo" or die $!; undef $/; # enable slurp mode my $content = <$fh>; close $fh; since some other module, may want to read data from some file in the default "line mode", so if the code we have just presented has been executed, the global value of C<$/> is now changed for any other code running inside the same Perl interpreter. Usually when a variable is localized you want to make sure that this change affects the shortest scope possible. So unless you are already inside some short C<{}> block, you should create one yourself. For example: my $content = ''; open my $fh, "<", "foo" or die $!; { local $/; $content = <$fh>; } close $fh; Here is an example of how your own code can go broken: for ( 1..3 ){ $\ = "\r\n"; nasty_break(); print "$_"; } sub nasty_break { $\ = "\f"; # do something with $_ } You probably expect this code to print the equivalent of "1\r\n2\r\n3\r\n" but instead you get: "1\f2\f3\f" Why? Because C<nasty_break()> modifies C<$\> without localizing it first. The value you set in C<nasty_break()> is still there when you return. The fix is to add C<local()> so the value doesn't leak out of C<nasty_break()>: local $\ = "\f"; It's easy to notice the problem in such a short example, but in more complicated code you are looking for trouble if you don't localize changes to the special variables. =over 8 =item $ARGV X<$ARGV> Contains the name of the current file when reading from C<< <> >>. =item @ARGV X<@ARGV> The array C<@ARGV> contains the command-line arguments intended for the script. C<$#ARGV> is generally the number of arguments minus one, because C<$ARGV[0]> is the first argument, I<not> the program's command name itself. See L</$0> for the command name. =item ARGV X<ARGV> The special filehandle that iterates over command-line filenames in C<@ARGV>. Usually written as the null filehandle in the angle operator C<< <> >>. Note that currently C<ARGV> only has its magical effect within the C<< <> >> operator; elsewhere it is just a plain filehandle corresponding to the last file opened by C<< <> >>. In particular, passing C<\*ARGV> as a parameter to a function that expects a filehandle may not cause your function to automatically read the contents of all the files in C<@ARGV>. =item ARGVOUT X<ARGVOUT> The special filehandle that points to the currently open output file when doing edit-in-place processing with B<-i>. Useful when you have to do a lot of inserting and don't want to keep modifying C<$_>. See L<perlrun|perlrun/-i[extension]> for the B<-i> switch. =item IO::Handle->output_field_separator( EXPR ) =item $OUTPUT_FIELD_SEPARATOR =item $OFS =item $, X<$,> X<$OFS> X<$OUTPUT_FIELD_SEPARATOR> The output field separator for the print operator. If defined, this value is printed between each of print's arguments. Default is C<undef>. You cannot call C<output_field_separator()> on a handle, only as a static method. See L<IO::Handle|IO::Handle>. Mnemonic: what is printed when there is a "," in your print statement. =item HANDLE->input_line_number( EXPR ) =item $INPUT_LINE_NUMBER =item $NR =item $. X<$.> X<$NR> X<$INPUT_LINE_NUMBER> X<line number> Current line number for the last filehandle accessed. Each filehandle in Perl counts the number of lines that have been read from it. (Depending on the value of C<$/>, Perl's idea of what constitutes a line may not match yours.) When a line is read from a filehandle (via C<readline()> or C<< <> >>), or when C<tell()> or C<seek()> is called on it, C<$.> becomes an alias to the line counter for that filehandle. You can adjust the counter by assigning to C<$.>, but this will not actually move the seek pointer. I<Localizing C<$.> will not localize the filehandle's line count>. Instead, it will localize perl's notion of which filehandle C<$.> is currently aliased to. C<$.> is reset when the filehandle is closed, but B<not> when an open filehandle is reopened without an intervening C<close()>. For more details, see L<perlop/"IE<sol>O Operators">. Because C<< <> >> never does an explicit close, line numbers increase across C<ARGV> files (but see examples in L<perlfunc/eof>). You can also use C<< HANDLE->input_line_number(EXPR) >> to access the line counter for a given filehandle without having to worry about which handle you last accessed. Mnemonic: many programs use "." to mean the current line number. =item IO::Handle->input_record_separator( EXPR ) =item $INPUT_RECORD_SEPARATOR =item $RS =item $/ X<$/> X<$RS> X<$INPUT_RECORD_SEPARATOR> The input record separator, newline by default. This influences Perl's idea of what a "line" is. Works like B<awk>'s RS variable, including treating empty lines as a terminator if set to the null string (an empty line cannot contain any spaces or tabs). You may set it to a multi-character string to match a multi-character terminator, or to C<undef> to read through the end of file. Setting it to C<"\n\n"> means something slightly different than setting to C<"">, if the file contains consecutive empty lines. Setting to C<""> will treat two or more consecutive empty lines as a single empty line. Setting to C<"\n\n"> will blindly assume that the next input character belongs to the next paragraph, even if it's a newline. local $/; # enable "slurp" mode local $_ = <FH>; # whole file now here s/\n[ \t]+/ /g; Remember: the value of C<$/> is a string, not a regex. B<awk> has to be better for something. :-) Setting C<$/> to an empty string -- the so-called I<paragraph mode> -- merits special attention. When C<$/> is set to C<""> and the entire file is read in with that setting, any sequence of consecutive newlines C<"\n\n"> at the beginning of the file is discarded. With the exception of the final record in the file, each sequence of characters ending in two or more newlines is treated as one record and is read in to end in exactly two newlines. If the last record in the file ends in zero or one consecutive newlines, that record is read in with that number of newlines. If the last record ends in two or more consecutive newlines, it is read in with two newlines like all preceding records. Suppose we wrote the following string to a file: my $string = "\n\n\n"; $string .= "alpha beta\ngamma delta\n\n\n"; $string .= "epsilon zeta eta\n\n"; $string .= "theta\n"; my $file = 'simple_file.txt'; open my $OUT, '>', $file or die; print $OUT $string; close $OUT or die; Now we read that file in paragraph mode: local $/ = ""; # paragraph mode open my $IN, '<', $file or die; my @records = <$IN>; close $IN or die; C<@records> will consist of these 3 strings: ( "alpha beta\ngamma delta\n\n", "epsilon zeta eta\n\n", "theta\n", ) Setting C<$/> to a reference to an integer, scalar containing an integer, or scalar that's convertible to an integer will attempt to read records instead of lines, with the maximum record size being the referenced integer number of characters. So this: local $/ = \32768; # or \"32768", or \$var_containing_32768 open my $fh, "<", $myfile or die $!; local $_ = <$fh>; will read a record of no more than 32768 characters from $fh. If you're not reading from a record-oriented file (or your OS doesn't have record-oriented files), then you'll likely get a full chunk of data with every read. If a record is larger than the record size you've set, you'll get the record back in pieces. Trying to set the record size to zero or less is deprecated and will cause $/ to have the value of "undef", which will cause reading in the (rest of the) whole file. As of 5.19.9 setting C<$/> to any other form of reference will throw a fatal exception. This is in preparation for supporting new ways to set C<$/> in the future. On VMS only, record reads bypass PerlIO layers and any associated buffering, so you must not mix record and non-record reads on the same filehandle. Record mode mixes with line mode only when the same buffering layer is in use for both modes. You cannot call C<input_record_separator()> on a handle, only as a static method. See L<IO::Handle|IO::Handle>. See also L<perlport/"Newlines">. Also see L</$.>. Mnemonic: / delimits line boundaries when quoting poetry. =item IO::Handle->output_record_separator( EXPR ) =item $OUTPUT_RECORD_SEPARATOR =item $ORS =item $\ X<$\> X<$ORS> X<$OUTPUT_RECORD_SEPARATOR> The output record separator for the print operator. If defined, this value is printed after the last of print's arguments. Default is C<undef>. You cannot call C<output_record_separator()> on a handle, only as a static method. See L<IO::Handle|IO::Handle>. Mnemonic: you set C<$\> instead of adding "\n" at the end of the print. Also, it's just like C<$/>, but it's what you get "back" from Perl. =item HANDLE->autoflush( EXPR ) =item $OUTPUT_AUTOFLUSH =item $| X<$|> X<autoflush> X<flush> X<$OUTPUT_AUTOFLUSH> If set to nonzero, forces a flush right away and after every write or print on the currently selected output channel. Default is 0 (regardless of whether the channel is really buffered by the system or not; C<$|> tells you only whether you've asked Perl explicitly to flush after each write). STDOUT will typically be line buffered if output is to the terminal and block buffered otherwise. Setting this variable is useful primarily when you are outputting to a pipe or socket, such as when you are running a Perl program under B<rsh> and want to see the output as it's happening. This has no effect on input buffering. See L<perlfunc/getc> for that. See L<perlfunc/select> on how to select the output channel. See also L<IO::Handle>. Mnemonic: when you want your pipes to be piping hot. =item ${^LAST_FH} X<${^LAST_FH}> This read-only variable contains a reference to the last-read filehandle. This is set by C<< <HANDLE> >>, C<readline>, C<tell>, C<eof> and C<seek>. This is the same handle that C<$.> and C<tell> and C<eof> without arguments use. It is also the handle used when Perl appends ", <STDIN> line 1" to an error or warning message. This variable was added in Perl v5.18.0. =back =head3 Variables related to formats The special variables for formats are a subset of those for filehandles. See L<perlform> for more information about Perl's formats. =over 8 =item $ACCUMULATOR =item $^A X<$^A> X<$ACCUMULATOR> The current value of the C<write()> accumulator for C<format()> lines. A format contains C<formline()> calls that put their result into C<$^A>. After calling its format, C<write()> prints out the contents of C<$^A> and empties. So you never really see the contents of C<$^A> unless you call C<formline()> yourself and then look at it. See L<perlform> and L<perlfunc/"formline PICTURE,LIST">. =item IO::Handle->format_formfeed(EXPR) =item $FORMAT_FORMFEED =item $^L X<$^L> X<$FORMAT_FORMFEED> What formats output as a form feed. The default is C<\f>. You cannot call C<format_formfeed()> on a handle, only as a static method. See L<IO::Handle|IO::Handle>. =item HANDLE->format_page_number(EXPR) =item $FORMAT_PAGE_NUMBER =item $% X<$%> X<$FORMAT_PAGE_NUMBER> The current page number of the currently selected output channel. Mnemonic: C<%> is page number in B<nroff>. =item HANDLE->format_lines_left(EXPR) =item $FORMAT_LINES_LEFT =item $- X<$-> X<$FORMAT_LINES_LEFT> The number of lines left on the page of the currently selected output channel. Mnemonic: lines_on_page - lines_printed. =item IO::Handle->format_line_break_characters EXPR =item $FORMAT_LINE_BREAK_CHARACTERS =item $: X<$:> X<FORMAT_LINE_BREAK_CHARACTERS> The current set of characters after which a string may be broken to fill continuation fields (starting with C<^>) in a format. The default is S<" \n-">, to break on a space, newline, or a hyphen. You cannot call C<format_line_break_characters()> on a handle, only as a static method. See L<IO::Handle|IO::Handle>. Mnemonic: a "colon" in poetry is a part of a line. =item HANDLE->format_lines_per_page(EXPR) =item $FORMAT_LINES_PER_PAGE =item $= X<$=> X<$FORMAT_LINES_PER_PAGE> The current page length (printable lines) of the currently selected output channel. The default is 60. Mnemonic: = has horizontal lines. =item HANDLE->format_top_name(EXPR) =item $FORMAT_TOP_NAME =item $^ X<$^> X<$FORMAT_TOP_NAME> The name of the current top-of-page format for the currently selected output channel. The default is the name of the filehandle with C<_TOP> appended. For example, the default format top name for the C<STDOUT> filehandle is C<STDOUT_TOP>. Mnemonic: points to top of page. =item HANDLE->format_name(EXPR) =item $FORMAT_NAME =item $~ X<$~> X<$FORMAT_NAME> The name of the current report format for the currently selected output channel. The default format name is the same as the filehandle name. For example, the default format name for the C<STDOUT> filehandle is just C<STDOUT>. Mnemonic: brother to C<$^>. =back =head2 Error Variables X<error> X<exception> The variables C<$@>, C<$!>, C<$^E>, and C<$?> contain information about different types of error conditions that may appear during execution of a Perl program. The variables are shown ordered by the "distance" between the subsystem which reported the error and the Perl process. They correspond to errors detected by the Perl interpreter, C library, operating system, or an external program, respectively. To illustrate the differences between these variables, consider the following Perl expression, which uses a single-quoted string. After execution of this statement, perl may have set all four special error variables: eval q{ open my $pipe, "/cdrom/install |" or die $!; my @res = <$pipe>; close $pipe or die "bad pipe: $?, $!"; }; When perl executes the C<eval()> expression, it translates the C<open()>, C<< <PIPE> >>, and C<close> calls in the C run-time library and thence to the operating system kernel. perl sets C<$!> to the C library's C<errno> if one of these calls fails. C<$@> is set if the string to be C<eval>-ed did not compile (this may happen if C<open> or C<close> were imported with bad prototypes), or if Perl code executed during evaluation C<die()>d. In these cases the value of C<$@> is the compile error, or the argument to C<die> (which will interpolate C<$!> and C<$?>). (See also L<Fatal>, though.) Under a few operating systems, C<$^E> may contain a more verbose error indicator, such as in this case, "CDROM tray not closed." Systems that do not support extended error messages leave C<$^E> the same as C<$!>. Finally, C<$?> may be set to a non-0 value if the external program F</cdrom/install> fails. The upper eight bits reflect specific error conditions encountered by the program (the program's C<exit()> value). The lower eight bits reflect mode of failure, like signal death and core dump information. See L<wait(2)> for details. In contrast to C<$!> and C<$^E>, which are set only if an error condition is detected, the variable C<$?> is set on each C<wait> or pipe C<close>, overwriting the old value. This is more like C<$@>, which on every C<eval()> is always set on failure and cleared on success. For more details, see the individual descriptions at C<$@>, C<$!>, C<$^E>, and C<$?>. =over 8 =item ${^CHILD_ERROR_NATIVE} X<$^CHILD_ERROR_NATIVE> The native status returned by the last pipe close, backtick (C<``>) command, successful call to C<wait()> or C<waitpid()>, or from the C<system()> operator. On POSIX-like systems this value can be decoded with the WIFEXITED, WEXITSTATUS, WIFSIGNALED, WTERMSIG, WIFSTOPPED, WSTOPSIG and WIFCONTINUED functions provided by the L<POSIX> module. Under VMS this reflects the actual VMS exit status; i.e. it is the same as C<$?> when the pragma C<use vmsish 'status'> is in effect. This variable was added in Perl v5.10.0. =item $EXTENDED_OS_ERROR =item $^E X<$^E> X<$EXTENDED_OS_ERROR> Error information specific to the current operating system. At the moment, this differs from C<L</$!>> under only VMS, OS/2, and Win32 (and for MacPerl). On all other platforms, C<$^E> is always just the same as C<$!>. Under VMS, C<$^E> provides the VMS status value from the last system error. This is more specific information about the last system error than that provided by C<$!>. This is particularly important when C<$!> is set to B<EVMSERR>. Under OS/2, C<$^E> is set to the error code of the last call to OS/2 API either via CRT, or directly from perl. Under Win32, C<$^E> always returns the last error information reported by the Win32 call C<GetLastError()> which describes the last error from within the Win32 API. Most Win32-specific code will report errors via C<$^E>. ANSI C and Unix-like calls set C<errno> and so most portable Perl code will report errors via C<$!>. Caveats mentioned in the description of C<L</$!>> generally apply to C<$^E>, also. This variable was added in Perl 5.003. Mnemonic: Extra error explanation. =item $EXCEPTIONS_BEING_CAUGHT =item $^S X<$^S> X<$EXCEPTIONS_BEING_CAUGHT> Current state of the interpreter. $^S State --------- ------------------------------------- undef Parsing module, eval, or main program true (1) Executing an eval false (0) Otherwise The first state may happen in C<$SIG{__DIE__}> and C<$SIG{__WARN__}> handlers. The English name $EXCEPTIONS_BEING_CAUGHT is slightly misleading, because the C<undef> value does not indicate whether exceptions are being caught, since compilation of the main program does not catch exceptions. This variable was added in Perl 5.004. =item $WARNING =item $^W X<$^W> X<$WARNING> The current value of the warning switch, initially true if B<-w> was used, false otherwise, but directly modifiable. See also L<warnings>. Mnemonic: related to the B<-w> switch. =item ${^WARNING_BITS} X<${^WARNING_BITS}> The current set of warning checks enabled by the C<use warnings> pragma. It has the same scoping as the C<$^H> and C<%^H> variables. The exact values are considered internal to the L<warnings> pragma and may change between versions of Perl. This variable was added in Perl v5.6.0. =item $OS_ERROR =item $ERRNO =item $! X<$!> X<$ERRNO> X<$OS_ERROR> When referenced, C<$!> retrieves the current value of the C C<errno> integer variable. If C<$!> is assigned a numerical value, that value is stored in C<errno>. When referenced as a string, C<$!> yields the system error string corresponding to C<errno>. Many system or library calls set C<errno> if they fail, to indicate the cause of failure. They usually do B<not> set C<errno> to zero if they succeed. This means C<errno>, hence C<$!>, is meaningful only I<immediately> after a B<failure>: if (open my $fh, "<", $filename) { # Here $! is meaningless. ... } else { # ONLY here is $! meaningful. ... # Already here $! might be meaningless. } # Since here we might have either success or failure, # $! is meaningless. Here, I<meaningless> means that C<$!> may be unrelated to the outcome of the C<open()> operator. Assignment to C<$!> is similarly ephemeral. It can be used immediately before invoking the C<die()> operator, to set the exit value, or to inspect the system error string corresponding to error I<n>, or to restore C<$!> to a meaningful state. Mnemonic: What just went bang? =item %OS_ERROR =item %ERRNO =item %! X<%!> X<%OS_ERROR> X<%ERRNO> Each element of C<%!> has a true value only if C<$!> is set to that value. For example, C<$!{ENOENT}> is true if and only if the current value of C<$!> is C<ENOENT>; that is, if the most recent error was "No such file or directory" (or its moral equivalent: not all operating systems give that exact error, and certainly not all languages). The specific true value is not guaranteed, but in the past has generally been the numeric value of C<$!>. To check if a particular key is meaningful on your system, use C<exists $!{the_key}>; for a list of legal keys, use C<keys %!>. See L<Errno> for more information, and also see L</$!>. This variable was added in Perl 5.005. =item $CHILD_ERROR =item $? X<$?> X<$CHILD_ERROR> The status returned by the last pipe close, backtick (C<``>) command, successful call to C<wait()> or C<waitpid()>, or from the C<system()> operator. This is just the 16-bit status word returned by the traditional Unix C<wait()> system call (or else is made up to look like it). Thus, the exit value of the subprocess is really (C<<< $? >> 8 >>>), and C<$? & 127> gives which signal, if any, the process died from, and C<$? & 128> reports whether there was a core dump. Additionally, if the C<h_errno> variable is supported in C, its value is returned via C<$?> if any C<gethost*()> function fails. If you have installed a signal handler for C<SIGCHLD>, the value of C<$?> will usually be wrong outside that handler. Inside an C<END> subroutine C<$?> contains the value that is going to be given to C<exit()>. You can modify C<$?> in an C<END> subroutine to change the exit status of your program. For example: END { $? = 1 if $? == 255; # die would make it 255 } Under VMS, the pragma C<use vmsish 'status'> makes C<$?> reflect the actual VMS exit status, instead of the default emulation of POSIX status; see L<perlvms/$?> for details. Mnemonic: similar to B<sh> and B<ksh>. =item $EVAL_ERROR =item $@ X<$@> X<$EVAL_ERROR> The Perl error from the last C<eval> operator, i.e. the last exception that was caught. For C<eval BLOCK>, this is either a runtime error message or the string or reference C<die> was called with. The C<eval STRING> form also catches syntax errors and other compile time exceptions. If no error occurs, C<eval> sets C<$@> to the empty string. Warning messages are not collected in this variable. You can, however, set up a routine to process warnings by setting C<$SIG{__WARN__}> as described in L</%SIG>. Mnemonic: Where was the error "at"? =back =head2 Variables related to the interpreter state These variables provide information about the current interpreter state. =over 8 =item $COMPILING =item $^C X<$^C> X<$COMPILING> The current value of the flag associated with the B<-c> switch. Mainly of use with B<-MO=...> to allow code to alter its behavior when being compiled, such as for example to C<AUTOLOAD> at compile time rather than normal, deferred loading. Setting C<$^C = 1> is similar to calling C<B::minus_c>. This variable was added in Perl v5.6.0. =item $DEBUGGING =item $^D X<$^D> X<$DEBUGGING> The current value of the debugging flags. May be read or set. Like its L<command-line equivalent|perlrun/B<-D>I<letters>>, you can use numeric or symbolic values, e.g. C<$^D = 10> or C<$^D = "st">. See L<perlrun/B<-D>I<number>>. The contents of this variable also affects the debugger operation. See L<perldebguts/Debugger Internals>. Mnemonic: value of B<-D> switch. =item ${^ENCODING} X<${^ENCODING}> This variable is no longer supported. It used to hold the I<object reference> to the C<Encode> object that was used to convert the source code to Unicode. Its purpose was to allow your non-ASCII Perl scripts not to have to be written in UTF-8; this was useful before editors that worked on UTF-8 encoded text were common, but that was long ago. It caused problems, such as affecting the operation of other modules that weren't expecting it, causing general mayhem. If you need something like this functionality, it is recommended that use you a simple source filter, such as L<Filter::Encoding>. If you are coming here because code of yours is being adversely affected by someone's use of this variable, you can usually work around it by doing this: local ${^ENCODING}; near the beginning of the functions that are getting broken. This undefines the variable during the scope of execution of the including function. This variable was added in Perl 5.8.2 and removed in 5.26.0. Setting it to anything other than C<undef> was made fatal in Perl 5.28.0. =item ${^GLOBAL_PHASE} X<${^GLOBAL_PHASE}> The current phase of the perl interpreter. Possible values are: =over 8 =item CONSTRUCT The C<PerlInterpreter*> is being constructed via C<perl_construct>. This value is mostly there for completeness and for use via the underlying C variable C<PL_phase>. It's not really possible for Perl code to be executed unless construction of the interpreter is finished. =item START This is the global compile-time. That includes, basically, every C<BEGIN> block executed directly or indirectly from during the compile-time of the top-level program. This phase is not called "BEGIN" to avoid confusion with C<BEGIN>-blocks, as those are executed during compile-time of any compilation unit, not just the top-level program. A new, localised compile-time entered at run-time, for example by constructs as C<eval "use SomeModule"> are not global interpreter phases, and therefore aren't reflected by C<${^GLOBAL_PHASE}>. =item CHECK Execution of any C<CHECK> blocks. =item INIT Similar to "CHECK", but for C<INIT>-blocks, not C<CHECK> blocks. =item RUN The main run-time, i.e. the execution of C<PL_main_root>. =item END Execution of any C<END> blocks. =item DESTRUCT Global destruction. =back Also note that there's no value for UNITCHECK-blocks. That's because those are run for each compilation unit individually, and therefore is not a global interpreter phase. Not every program has to go through each of the possible phases, but transition from one phase to another can only happen in the order described in the above list. An example of all of the phases Perl code can see: BEGIN { print "compile-time: ${^GLOBAL_PHASE}\n" } INIT { print "init-time: ${^GLOBAL_PHASE}\n" } CHECK { print "check-time: ${^GLOBAL_PHASE}\n" } { package Print::Phase; sub new { my ($class, $time) = @_; return bless \$time, $class; } sub DESTROY { my $self = shift; print "$$self: ${^GLOBAL_PHASE}\n"; } } print "run-time: ${^GLOBAL_PHASE}\n"; my $runtime = Print::Phase->new( "lexical variables are garbage collected before END" ); END { print "end-time: ${^GLOBAL_PHASE}\n" } our $destruct = Print::Phase->new( "package variables are garbage collected after END" ); This will print out compile-time: START check-time: CHECK init-time: INIT run-time: RUN lexical variables are garbage collected before END: RUN end-time: END package variables are garbage collected after END: DESTRUCT This variable was added in Perl 5.14.0. =item $^H X<$^H> WARNING: This variable is strictly for internal use only. Its availability, behavior, and contents are subject to change without notice. This variable contains compile-time hints for the Perl interpreter. At the end of compilation of a BLOCK the value of this variable is restored to the value when the interpreter started to compile the BLOCK. When perl begins to parse any block construct that provides a lexical scope (e.g., eval body, required file, subroutine body, loop body, or conditional block), the existing value of C<$^H> is saved, but its value is left unchanged. When the compilation of the block is completed, it regains the saved value. Between the points where its value is saved and restored, code that executes within BEGIN blocks is free to change the value of C<$^H>. This behavior provides the semantic of lexical scoping, and is used in, for instance, the C<use strict> pragma. The contents should be an integer; different bits of it are used for different pragmatic flags. Here's an example: sub add_100 { $^H |= 0x100 } sub foo { BEGIN { add_100() } bar->baz($boon); } Consider what happens during execution of the BEGIN block. At this point the BEGIN block has already been compiled, but the body of C<foo()> is still being compiled. The new value of C<$^H> will therefore be visible only while the body of C<foo()> is being compiled. Substitution of C<BEGIN { add_100() }> block with: BEGIN { require strict; strict->import('vars') } demonstrates how C<use strict 'vars'> is implemented. Here's a conditional version of the same lexical pragma: BEGIN { require strict; strict->import('vars') if $condition } This variable was added in Perl 5.003. =item %^H X<%^H> The C<%^H> hash provides the same scoping semantic as C<$^H>. This makes it useful for implementation of lexically scoped pragmas. See L<perlpragma>. All the entries are stringified when accessed at runtime, so only simple values can be accommodated. This means no pointers to objects, for example. When putting items into C<%^H>, in order to avoid conflicting with other users of the hash there is a convention regarding which keys to use. A module should use only keys that begin with the module's name (the name of its main package) and a "/" character. For example, a module C<Foo::Bar> should use keys such as C<Foo::Bar/baz>. This variable was added in Perl v5.6.0. =item ${^OPEN} X<${^OPEN}> An internal variable used by L<PerlIO>. A string in two parts, separated by a C<\0> byte, the first part describes the input layers, the second part describes the output layers. This is the mechanism that applies the lexical effects of the L<open> pragma, and the main program scope effects of the C<io> or C<D> options for the L<-C command-line switch|perlrun/-C [I<numberE<sol>list>]> and L<PERL_UNICODE environment variable|perlrun/PERL_UNICODE>. The functions C<accept()>, C<open()>, C<pipe()>, C<readpipe()> (as well as the related C<qx> and C<`STRING`> operators), C<socket()>, C<socketpair()>, and C<sysopen()> are affected by the lexical value of this variable. The implicit L</ARGV> handle opened by C<readline()> (or the related C<< <> >> and C<<< <<>> >>> operators) on passed filenames is also affected (but not if it opens C<STDIN>). If this variable is not set, these functions will set the default layers as described in L<PerlIO/Defaults and how to override them>. C<open()> ignores this variable (and the default layers) when called with 3 arguments and explicit layers are specified. Indirect calls to these functions via modules like L<IO::Handle> are not affected as they occur in a different lexical scope. Directory handles such as opened by C<opendir()> are not currently affected. This variable was added in Perl v5.8.0. =item $PERLDB =item $^P X<$^P> X<$PERLDB> The internal variable for debugging support. The meanings of the various bits are subject to change, but currently indicate: =over 6 =item 0x01 Debug subroutine enter/exit. =item 0x02 Line-by-line debugging. Causes C<DB::DB()> subroutine to be called for each statement executed. Also causes saving source code lines (like 0x400). =item 0x04 Switch off optimizations. =item 0x08 Preserve more data for future interactive inspections. =item 0x10 Keep info about source lines on which a subroutine is defined. =item 0x20 Start with single-step on. =item 0x40 Use subroutine address instead of name when reporting. =item 0x80 Report C<goto &subroutine> as well. =item 0x100 Provide informative "file" names for evals based on the place they were compiled. =item 0x200 Provide informative names to anonymous subroutines based on the place they were compiled. =item 0x400 Save source code lines into C<@{"_<$filename"}>. =item 0x800 When saving source, include evals that generate no subroutines. =item 0x1000 When saving source, include source that did not compile. =back Some bits may be relevant at compile-time only, some at run-time only. This is a new mechanism and the details may change. See also L<perldebguts>. =item ${^TAINT} X<${^TAINT}> Reflects if taint mode is on or off. 1 for on (the program was run with B<-T>), 0 for off, -1 when only taint warnings are enabled (i.e. with B<-t> or B<-TU>). This variable is read-only. This variable was added in Perl v5.8.0. =item ${^SAFE_LOCALES} X<${^SAFE_LOCALES}> Reflects if safe locale operations are available to this perl (when the value is 1) or not (the value is 0). This variable is always 1 if the perl has been compiled without threads. It is also 1 if this perl is using thread-safe locale operations. Note that an individual thread may choose to use the global locale (generally unsafe) by calling L<perlapi/switch_to_global_locale>. This variable currently is still set to 1 in such threads. This variable is read-only. This variable was added in Perl v5.28.0. =item ${^UNICODE} X<${^UNICODE}> Reflects certain Unicode settings of Perl. See L<perlrun|perlrun/-C [numberE<sol>list]> documentation for the C<-C> switch for more information about the possible values. This variable is set during Perl startup and is thereafter read-only. This variable was added in Perl v5.8.2. =item ${^UTF8CACHE} X<${^UTF8CACHE}> This variable controls the state of the internal UTF-8 offset caching code. 1 for on (the default), 0 for off, -1 to debug the caching code by checking all its results against linear scans, and panicking on any discrepancy. This variable was added in Perl v5.8.9. It is subject to change or removal without notice, but is currently used to avoid recalculating the boundaries of multi-byte UTF-8-encoded characters. =item ${^UTF8LOCALE} X<${^UTF8LOCALE}> This variable indicates whether a UTF-8 locale was detected by perl at startup. This information is used by perl when it's in adjust-utf8ness-to-locale mode (as when run with the C<-CL> command-line switch); see L<perlrun|perlrun/-C [numberE<sol>list]> for more info on this. This variable was added in Perl v5.8.8. =back =head2 Deprecated and removed variables Deprecating a variable announces the intent of the perl maintainers to eventually remove the variable from the language. It may still be available despite its status. Using a deprecated variable triggers a warning. Once a variable is removed, its use triggers an error telling you the variable is unsupported. See L<perldiag> for details about error messages. =over 8 =item $# X<$#> C<$#> was a variable that could be used to format printed numbers. After a deprecation cycle, its magic was removed in Perl v5.10.0 and using it now triggers a warning: C<$# is no longer supported>. This is not the sigil you use in front of an array name to get the last index, like C<$#array>. That's still how you get the last index of an array in Perl. The two have nothing to do with each other. Deprecated in Perl 5. Removed in Perl v5.10.0. =item $* X<$*> C<$*> was a variable that you could use to enable multiline matching. After a deprecation cycle, its magic was removed in Perl v5.10.0. Using it now triggers a warning: C<$* is no longer supported>. You should use the C</s> and C</m> regexp modifiers instead. Deprecated in Perl 5. Removed in Perl v5.10.0. =item $[ X<$[> This variable stores the index of the first element in an array, and of the first character in a substring. The default is 0, but you could theoretically set it to 1 to make Perl behave more like B<awk> (or Fortran) when subscripting and when evaluating the index() and substr() functions. As of release 5 of Perl, assignment to C<$[> is treated as a compiler directive, and cannot influence the behavior of any other file. (That's why you can only assign compile-time constants to it.) Its use is highly discouraged. Prior to Perl v5.10.0, assignment to C<$[> could be seen from outer lexical scopes in the same file, unlike other compile-time directives (such as L<strict>). Using local() on it would bind its value strictly to a lexical block. Now it is always lexically scoped. As of Perl v5.16.0, it is implemented by the L<arybase> module. As of Perl v5.30.0, or under C<use v5.16>, or C<no feature "array_base">, C<$[> no longer has any effect, and always contains 0. Assigning 0 to it is permitted, but any other value will produce an error. Mnemonic: [ begins subscripts. Deprecated in Perl v5.12.0. =back =cut perldsc.pod 0000644 00000062016 15125556335 0006723 0 ustar 00 =head1 NAME X<data structure> X<complex data structure> X<struct> perldsc - Perl Data Structures Cookbook =head1 DESCRIPTION Perl lets us have complex data structures. You can write something like this and all of a sudden, you'd have an array with three dimensions! for my $x (1 .. 10) { for my $y (1 .. 10) { for my $z (1 .. 10) { $AoA[$x][$y][$z] = $x ** $y + $z; } } } Alas, however simple this may appear, underneath it's a much more elaborate construct than meets the eye! How do you print it out? Why can't you say just C<print @AoA>? How do you sort it? How can you pass it to a function or get one of these back from a function? Is it an object? Can you save it to disk to read back later? How do you access whole rows or columns of that matrix? Do all the values have to be numeric? As you see, it's quite easy to become confused. While some small portion of the blame for this can be attributed to the reference-based implementation, it's really more due to a lack of existing documentation with examples designed for the beginner. This document is meant to be a detailed but understandable treatment of the many different sorts of data structures you might want to develop. It should also serve as a cookbook of examples. That way, when you need to create one of these complex data structures, you can just pinch, pilfer, or purloin a drop-in example from here. Let's look at each of these possible constructs in detail. There are separate sections on each of the following: =over 5 =item * arrays of arrays =item * hashes of arrays =item * arrays of hashes =item * hashes of hashes =item * more elaborate constructs =back But for now, let's look at general issues common to all these types of data structures. =head1 REFERENCES X<reference> X<dereference> X<dereferencing> X<pointer> The most important thing to understand about all data structures in Perl--including multidimensional arrays--is that even though they might appear otherwise, Perl C<@ARRAY>s and C<%HASH>es are all internally one-dimensional. They can hold only scalar values (meaning a string, number, or a reference). They cannot directly contain other arrays or hashes, but instead contain I<references> to other arrays or hashes. X<multidimensional array> X<array, multidimensional> You can't use a reference to an array or hash in quite the same way that you would a real array or hash. For C or C++ programmers unused to distinguishing between arrays and pointers to the same, this can be confusing. If so, just think of it as the difference between a structure and a pointer to a structure. You can (and should) read more about references in L<perlref>. Briefly, references are rather like pointers that know what they point to. (Objects are also a kind of reference, but we won't be needing them right away--if ever.) This means that when you have something which looks to you like an access to a two-or-more-dimensional array and/or hash, what's really going on is that the base type is merely a one-dimensional entity that contains references to the next level. It's just that you can I<use> it as though it were a two-dimensional one. This is actually the way almost all C multidimensional arrays work as well. $array[7][12] # array of arrays $array[7]{string} # array of hashes $hash{string}[7] # hash of arrays $hash{string}{'another string'} # hash of hashes Now, because the top level contains only references, if you try to print out your array in with a simple print() function, you'll get something that doesn't look very nice, like this: my @AoA = ( [2, 3], [4, 5, 7], [0] ); print $AoA[1][2]; 7 print @AoA; ARRAY(0x83c38)ARRAY(0x8b194)ARRAY(0x8b1d0) That's because Perl doesn't (ever) implicitly dereference your variables. If you want to get at the thing a reference is referring to, then you have to do this yourself using either prefix typing indicators, like C<${$blah}>, C<@{$blah}>, C<@{$blah[$i]}>, or else postfix pointer arrows, like C<$a-E<gt>[3]>, C<$h-E<gt>{fred}>, or even C<$ob-E<gt>method()-E<gt>[3]>. =head1 COMMON MISTAKES The two most common mistakes made in constructing something like an array of arrays is either accidentally counting the number of elements or else taking a reference to the same memory location repeatedly. Here's the case where you just get the count instead of a nested array: for my $i (1..10) { my @array = somefunc($i); $AoA[$i] = @array; # WRONG! } That's just the simple case of assigning an array to a scalar and getting its element count. If that's what you really and truly want, then you might do well to consider being a tad more explicit about it, like this: for my $i (1..10) { my @array = somefunc($i); $counts[$i] = scalar @array; } Here's the case of taking a reference to the same memory location again and again: # Either without strict or having an outer-scope my @array; # declaration. for my $i (1..10) { @array = somefunc($i); $AoA[$i] = \@array; # WRONG! } So, what's the big problem with that? It looks right, doesn't it? After all, I just told you that you need an array of references, so by golly, you've made me one! Unfortunately, while this is true, it's still broken. All the references in @AoA refer to the I<very same place>, and they will therefore all hold whatever was last in @array! It's similar to the problem demonstrated in the following C program: #include <pwd.h> main() { struct passwd *getpwnam(), *rp, *dp; rp = getpwnam("root"); dp = getpwnam("daemon"); printf("daemon name is %s\nroot name is %s\n", dp->pw_name, rp->pw_name); } Which will print daemon name is daemon root name is daemon The problem is that both C<rp> and C<dp> are pointers to the same location in memory! In C, you'd have to remember to malloc() yourself some new memory. In Perl, you'll want to use the array constructor C<[]> or the hash constructor C<{}> instead. Here's the right way to do the preceding broken code fragments: X<[]> X<{}> # Either without strict or having an outer-scope my @array; # declaration. for my $i (1..10) { @array = somefunc($i); $AoA[$i] = [ @array ]; } The square brackets make a reference to a new array with a I<copy> of what's in @array at the time of the assignment. This is what you want. Note that this will produce something similar, but it's much harder to read: # Either without strict or having an outer-scope my @array; # declaration. for my $i (1..10) { @array = 0 .. $i; @{$AoA[$i]} = @array; } Is it the same? Well, maybe so--and maybe not. The subtle difference is that when you assign something in square brackets, you know for sure it's always a brand new reference with a new I<copy> of the data. Something else could be going on in this new case with the C<@{$AoA[$i]}> dereference on the left-hand-side of the assignment. It all depends on whether C<$AoA[$i]> had been undefined to start with, or whether it already contained a reference. If you had already populated @AoA with references, as in $AoA[3] = \@another_array; Then the assignment with the indirection on the left-hand-side would use the existing reference that was already there: @{$AoA[3]} = @array; Of course, this I<would> have the "interesting" effect of clobbering @another_array. (Have you ever noticed how when a programmer says something is "interesting", that rather than meaning "intriguing", they're disturbingly more apt to mean that it's "annoying", "difficult", or both? :-) So just remember always to use the array or hash constructors with C<[]> or C<{}>, and you'll be fine, although it's not always optimally efficient. Surprisingly, the following dangerous-looking construct will actually work out fine: for my $i (1..10) { my @array = somefunc($i); $AoA[$i] = \@array; } That's because my() is more of a run-time statement than it is a compile-time declaration I<per se>. This means that the my() variable is remade afresh each time through the loop. So even though it I<looks> as though you stored the same variable reference each time, you actually did not! This is a subtle distinction that can produce more efficient code at the risk of misleading all but the most experienced of programmers. So I usually advise against teaching it to beginners. In fact, except for passing arguments to functions, I seldom like to see the gimme-a-reference operator (backslash) used much at all in code. Instead, I advise beginners that they (and most of the rest of us) should try to use the much more easily understood constructors C<[]> and C<{}> instead of relying upon lexical (or dynamic) scoping and hidden reference-counting to do the right thing behind the scenes. In summary: $AoA[$i] = [ @array ]; # usually best $AoA[$i] = \@array; # perilous; just how my() was that array? @{ $AoA[$i] } = @array; # way too tricky for most programmers =head1 CAVEAT ON PRECEDENCE X<dereference, precedence> X<dereferencing, precedence> Speaking of things like C<@{$AoA[$i]}>, the following are actually the same thing: X<< -> >> $aref->[2][2] # clear $$aref[2][2] # confusing That's because Perl's precedence rules on its five prefix dereferencers (which look like someone swearing: C<$ @ * % &>) make them bind more tightly than the postfix subscripting brackets or braces! This will no doubt come as a great shock to the C or C++ programmer, who is quite accustomed to using C<*a[i]> to mean what's pointed to by the I<i'th> element of C<a>. That is, they first take the subscript, and only then dereference the thing at that subscript. That's fine in C, but this isn't C. The seemingly equivalent construct in Perl, C<$$aref[$i]> first does the deref of $aref, making it take $aref as a reference to an array, and then dereference that, and finally tell you the I<i'th> value of the array pointed to by $AoA. If you wanted the C notion, you'd have to write C<${$AoA[$i]}> to force the C<$AoA[$i]> to get evaluated first before the leading C<$> dereferencer. =head1 WHY YOU SHOULD ALWAYS C<use strict> If this is starting to sound scarier than it's worth, relax. Perl has some features to help you avoid its most common pitfalls. The best way to avoid getting confused is to start every program like this: #!/usr/bin/perl -w use strict; This way, you'll be forced to declare all your variables with my() and also disallow accidental "symbolic dereferencing". Therefore if you'd done this: my $aref = [ [ "fred", "barney", "pebbles", "bambam", "dino", ], [ "homer", "bart", "marge", "maggie", ], [ "george", "jane", "elroy", "judy", ], ]; print $aref[2][2]; The compiler would immediately flag that as an error I<at compile time>, because you were accidentally accessing C<@aref>, an undeclared variable, and it would thereby remind you to write instead: print $aref->[2][2] =head1 DEBUGGING X<data structure, debugging> X<complex data structure, debugging> X<AoA, debugging> X<HoA, debugging> X<AoH, debugging> X<HoH, debugging> X<array of arrays, debugging> X<hash of arrays, debugging> X<array of hashes, debugging> X<hash of hashes, debugging> You can use the debugger's C<x> command to dump out complex data structures. For example, given the assignment to $AoA above, here's the debugger output: DB<1> x $AoA $AoA = ARRAY(0x13b5a0) 0 ARRAY(0x1f0a24) 0 'fred' 1 'barney' 2 'pebbles' 3 'bambam' 4 'dino' 1 ARRAY(0x13b558) 0 'homer' 1 'bart' 2 'marge' 3 'maggie' 2 ARRAY(0x13b540) 0 'george' 1 'jane' 2 'elroy' 3 'judy' =head1 CODE EXAMPLES Presented with little comment (these will get their own manpages someday) here are short code examples illustrating access of various types of data structures. =head1 ARRAYS OF ARRAYS X<array of arrays> X<AoA> =head2 Declaration of an ARRAY OF ARRAYS @AoA = ( [ "fred", "barney" ], [ "george", "jane", "elroy" ], [ "homer", "marge", "bart" ], ); =head2 Generation of an ARRAY OF ARRAYS # reading from file while ( <> ) { push @AoA, [ split ]; } # calling a function for $i ( 1 .. 10 ) { $AoA[$i] = [ somefunc($i) ]; } # using temp vars for $i ( 1 .. 10 ) { @tmp = somefunc($i); $AoA[$i] = [ @tmp ]; } # add to an existing row push @{ $AoA[0] }, "wilma", "betty"; =head2 Access and Printing of an ARRAY OF ARRAYS # one element $AoA[0][0] = "Fred"; # another element $AoA[1][1] =~ s/(\w)/\u$1/; # print the whole thing with refs for $aref ( @AoA ) { print "\t [ @$aref ],\n"; } # print the whole thing with indices for $i ( 0 .. $#AoA ) { print "\t [ @{$AoA[$i]} ],\n"; } # print the whole thing one at a time for $i ( 0 .. $#AoA ) { for $j ( 0 .. $#{ $AoA[$i] } ) { print "elt $i $j is $AoA[$i][$j]\n"; } } =head1 HASHES OF ARRAYS X<hash of arrays> X<HoA> =head2 Declaration of a HASH OF ARRAYS %HoA = ( flintstones => [ "fred", "barney" ], jetsons => [ "george", "jane", "elroy" ], simpsons => [ "homer", "marge", "bart" ], ); =head2 Generation of a HASH OF ARRAYS # reading from file # flintstones: fred barney wilma dino while ( <> ) { next unless s/^(.*?):\s*//; $HoA{$1} = [ split ]; } # reading from file; more temps # flintstones: fred barney wilma dino while ( $line = <> ) { ($who, $rest) = split /:\s*/, $line, 2; @fields = split ' ', $rest; $HoA{$who} = [ @fields ]; } # calling a function that returns a list for $group ( "simpsons", "jetsons", "flintstones" ) { $HoA{$group} = [ get_family($group) ]; } # likewise, but using temps for $group ( "simpsons", "jetsons", "flintstones" ) { @members = get_family($group); $HoA{$group} = [ @members ]; } # append new members to an existing family push @{ $HoA{"flintstones"} }, "wilma", "betty"; =head2 Access and Printing of a HASH OF ARRAYS # one element $HoA{flintstones}[0] = "Fred"; # another element $HoA{simpsons}[1] =~ s/(\w)/\u$1/; # print the whole thing foreach $family ( keys %HoA ) { print "$family: @{ $HoA{$family} }\n" } # print the whole thing with indices foreach $family ( keys %HoA ) { print "family: "; foreach $i ( 0 .. $#{ $HoA{$family} } ) { print " $i = $HoA{$family}[$i]"; } print "\n"; } # print the whole thing sorted by number of members foreach $family ( sort { @{$HoA{$b}} <=> @{$HoA{$a}} } keys %HoA ) { print "$family: @{ $HoA{$family} }\n" } # print the whole thing sorted by number of members and name foreach $family ( sort { @{$HoA{$b}} <=> @{$HoA{$a}} || $a cmp $b } keys %HoA ) { print "$family: ", join(", ", sort @{ $HoA{$family} }), "\n"; } =head1 ARRAYS OF HASHES X<array of hashes> X<AoH> =head2 Declaration of an ARRAY OF HASHES @AoH = ( { Lead => "fred", Friend => "barney", }, { Lead => "george", Wife => "jane", Son => "elroy", }, { Lead => "homer", Wife => "marge", Son => "bart", } ); =head2 Generation of an ARRAY OF HASHES # reading from file # format: LEAD=fred FRIEND=barney while ( <> ) { $rec = {}; for $field ( split ) { ($key, $value) = split /=/, $field; $rec->{$key} = $value; } push @AoH, $rec; } # reading from file # format: LEAD=fred FRIEND=barney # no temp while ( <> ) { push @AoH, { split /[\s+=]/ }; } # calling a function that returns a key/value pair list, like # "lead","fred","daughter","pebbles" while ( %fields = getnextpairset() ) { push @AoH, { %fields }; } # likewise, but using no temp vars while (<>) { push @AoH, { parsepairs($_) }; } # add key/value to an element $AoH[0]{pet} = "dino"; $AoH[2]{pet} = "santa's little helper"; =head2 Access and Printing of an ARRAY OF HASHES # one element $AoH[0]{lead} = "fred"; # another element $AoH[1]{lead} =~ s/(\w)/\u$1/; # print the whole thing with refs for $href ( @AoH ) { print "{ "; for $role ( keys %$href ) { print "$role=$href->{$role} "; } print "}\n"; } # print the whole thing with indices for $i ( 0 .. $#AoH ) { print "$i is { "; for $role ( keys %{ $AoH[$i] } ) { print "$role=$AoH[$i]{$role} "; } print "}\n"; } # print the whole thing one at a time for $i ( 0 .. $#AoH ) { for $role ( keys %{ $AoH[$i] } ) { print "elt $i $role is $AoH[$i]{$role}\n"; } } =head1 HASHES OF HASHES X<hash of hashes> X<HoH> =head2 Declaration of a HASH OF HASHES %HoH = ( flintstones => { lead => "fred", pal => "barney", }, jetsons => { lead => "george", wife => "jane", "his boy" => "elroy", }, simpsons => { lead => "homer", wife => "marge", kid => "bart", }, ); =head2 Generation of a HASH OF HASHES # reading from file # flintstones: lead=fred pal=barney wife=wilma pet=dino while ( <> ) { next unless s/^(.*?):\s*//; $who = $1; for $field ( split ) { ($key, $value) = split /=/, $field; $HoH{$who}{$key} = $value; } # reading from file; more temps while ( <> ) { next unless s/^(.*?):\s*//; $who = $1; $rec = {}; $HoH{$who} = $rec; for $field ( split ) { ($key, $value) = split /=/, $field; $rec->{$key} = $value; } } # calling a function that returns a key,value hash for $group ( "simpsons", "jetsons", "flintstones" ) { $HoH{$group} = { get_family($group) }; } # likewise, but using temps for $group ( "simpsons", "jetsons", "flintstones" ) { %members = get_family($group); $HoH{$group} = { %members }; } # append new members to an existing family %new_folks = ( wife => "wilma", pet => "dino", ); for $what (keys %new_folks) { $HoH{flintstones}{$what} = $new_folks{$what}; } =head2 Access and Printing of a HASH OF HASHES # one element $HoH{flintstones}{wife} = "wilma"; # another element $HoH{simpsons}{lead} =~ s/(\w)/\u$1/; # print the whole thing foreach $family ( keys %HoH ) { print "$family: { "; for $role ( keys %{ $HoH{$family} } ) { print "$role=$HoH{$family}{$role} "; } print "}\n"; } # print the whole thing somewhat sorted foreach $family ( sort keys %HoH ) { print "$family: { "; for $role ( sort keys %{ $HoH{$family} } ) { print "$role=$HoH{$family}{$role} "; } print "}\n"; } # print the whole thing sorted by number of members foreach $family ( sort { keys %{$HoH{$b}} <=> keys %{$HoH{$a}} } keys %HoH ) { print "$family: { "; for $role ( sort keys %{ $HoH{$family} } ) { print "$role=$HoH{$family}{$role} "; } print "}\n"; } # establish a sort order (rank) for each role $i = 0; for ( qw(lead wife son daughter pal pet) ) { $rank{$_} = ++$i } # now print the whole thing sorted by number of members foreach $family ( sort { keys %{ $HoH{$b} } <=> keys %{ $HoH{$a} } } keys %HoH ) { print "$family: { "; # and print these according to rank order for $role ( sort { $rank{$a} <=> $rank{$b} } keys %{ $HoH{$family} } ) { print "$role=$HoH{$family}{$role} "; } print "}\n"; } =head1 MORE ELABORATE RECORDS X<record> X<structure> X<struct> =head2 Declaration of MORE ELABORATE RECORDS Here's a sample showing how to create and use a record whose fields are of many different sorts: $rec = { TEXT => $string, SEQUENCE => [ @old_values ], LOOKUP => { %some_table }, THATCODE => \&some_function, THISCODE => sub { $_[0] ** $_[1] }, HANDLE => \*STDOUT, }; print $rec->{TEXT}; print $rec->{SEQUENCE}[0]; $last = pop @ { $rec->{SEQUENCE} }; print $rec->{LOOKUP}{"key"}; ($first_k, $first_v) = each %{ $rec->{LOOKUP} }; $answer = $rec->{THATCODE}->($arg); $answer = $rec->{THISCODE}->($arg1, $arg2); # careful of extra block braces on fh ref print { $rec->{HANDLE} } "a string\n"; use FileHandle; $rec->{HANDLE}->autoflush(1); $rec->{HANDLE}->print(" a string\n"); =head2 Declaration of a HASH OF COMPLEX RECORDS %TV = ( flintstones => { series => "flintstones", nights => [ qw(monday thursday friday) ], members => [ { name => "fred", role => "lead", age => 36, }, { name => "wilma", role => "wife", age => 31, }, { name => "pebbles", role => "kid", age => 4, }, ], }, jetsons => { series => "jetsons", nights => [ qw(wednesday saturday) ], members => [ { name => "george", role => "lead", age => 41, }, { name => "jane", role => "wife", age => 39, }, { name => "elroy", role => "kid", age => 9, }, ], }, simpsons => { series => "simpsons", nights => [ qw(monday) ], members => [ { name => "homer", role => "lead", age => 34, }, { name => "marge", role => "wife", age => 37, }, { name => "bart", role => "kid", age => 11, }, ], }, ); =head2 Generation of a HASH OF COMPLEX RECORDS # reading from file # this is most easily done by having the file itself be # in the raw data format as shown above. perl is happy # to parse complex data structures if declared as data, so # sometimes it's easiest to do that # here's a piece by piece build up $rec = {}; $rec->{series} = "flintstones"; $rec->{nights} = [ find_days() ]; @members = (); # assume this file in field=value syntax while (<>) { %fields = split /[\s=]+/; push @members, { %fields }; } $rec->{members} = [ @members ]; # now remember the whole thing $TV{ $rec->{series} } = $rec; ########################################################### # now, you might want to make interesting extra fields that # include pointers back into the same data structure so if # change one piece, it changes everywhere, like for example # if you wanted a {kids} field that was a reference # to an array of the kids' records without having duplicate # records and thus update problems. ########################################################### foreach $family (keys %TV) { $rec = $TV{$family}; # temp pointer @kids = (); for $person ( @{ $rec->{members} } ) { if ($person->{role} =~ /kid|son|daughter/) { push @kids, $person; } } # REMEMBER: $rec and $TV{$family} point to same data!! $rec->{kids} = [ @kids ]; } # you copied the array, but the array itself contains pointers # to uncopied objects. this means that if you make bart get # older via $TV{simpsons}{kids}[0]{age}++; # then this would also change in print $TV{simpsons}{members}[2]{age}; # because $TV{simpsons}{kids}[0] and $TV{simpsons}{members}[2] # both point to the same underlying anonymous hash table # print the whole thing foreach $family ( keys %TV ) { print "the $family"; print " is on during @{ $TV{$family}{nights} }\n"; print "its members are:\n"; for $who ( @{ $TV{$family}{members} } ) { print " $who->{name} ($who->{role}), age $who->{age}\n"; } print "it turns out that $TV{$family}{lead} has "; print scalar ( @{ $TV{$family}{kids} } ), " kids named "; print join (", ", map { $_->{name} } @{ $TV{$family}{kids} } ); print "\n"; } =head1 Database Ties You cannot easily tie a multilevel data structure (such as a hash of hashes) to a dbm file. The first problem is that all but GDBM and Berkeley DB have size limitations, but beyond that, you also have problems with how references are to be represented on disk. One experimental module that does partially attempt to address this need is the MLDBM module. Check your nearest CPAN site as described in L<perlmodlib> for source code to MLDBM. =head1 SEE ALSO L<perlref>, L<perllol>, L<perldata>, L<perlobj> =head1 AUTHOR Tom Christiansen <F<tchrist@perl.com>> perlhist.pod 0000644 00000155544 15125556335 0007132 0 ustar 00 =encoding utf8 =head1 NAME perlhist - the Perl history records =head1 DESCRIPTION This document aims to record the Perl source code releases. =head1 INTRODUCTION Perl history in brief, by Larry Wall: Perl 0 introduced Perl to my officemates. Perl 1 introduced Perl to the world, and changed /\(...\|...\)/ to /(...|...)/. \(Dan Faigin still hasn't forgiven me. :-\) Perl 2 introduced Henry Spencer's regular expression package. Perl 3 introduced the ability to handle binary data (embedded nulls). Perl 4 introduced the first Camel book. Really. We mostly just switched version numbers so the book could refer to 4.000. Perl 5 introduced everything else, including the ability to introduce everything else. =head1 THE KEEPERS OF THE PUMPKIN Larry Wall, Andy Dougherty, Tom Christiansen, Charles Bailey, Nick Ing-Simmons, Chip Salzenberg, Tim Bunce, Malcolm Beattie, Gurusamy Sarathy, Graham Barr, Jarkko Hietaniemi, Hugo van der Sanden, Michael Schwern, Rafael Garcia-Suarez, Nicholas Clark, Richard Clamp, Leon Brocard, Dave Mitchell, Jesse Vincent, Ricardo Signes, Steve Hay, Matt S Trout, David Golden, Florian Ragwitz, Tatsuhiko Miyagawa, Chris C<BinGOs> Williams, Zefram, Ævar Arnfjörð Bjarmason, Stevan Little, Dave Rolsky, Max Maischein, Abigail, Jesse Luehrs, Tony Cook, Dominic Hargreaves, Aaron Crane, Aristotle Pagaltzis, Matthew Horsfall, Peter Martini, Sawyer X, Chad 'Exodist' Granum, Renee Bäcker, Eric Herman, John SJ Anderson, Karen Etheridge, Zak B. Elep, Tom Hukins, and Richard Leach. =head2 PUMPKIN? [from Porting/pumpkin.pod in the Perl source code distribution] =for disclaimer orking cows is hazardous, and not legal in all jurisdictions Chip Salzenberg gets credit for that, with a nod to his cow orker, David Croy. We had passed around various names (baton, token, hot potato) but none caught on. Then, Chip asked: [begin quote] Who has the patch pumpkin? To explain: David Croy once told me that at a previous job, there was one tape drive and multiple systems that used it for backups. But instead of some high-tech exclusion software, they used a low-tech method to prevent multiple simultaneous backups: a stuffed pumpkin. No one was allowed to make backups unless they had the "backup pumpkin". [end quote] The name has stuck. The holder of the pumpkin is sometimes called the pumpking (keeping the source afloat?) or the pumpkineer (pulling the strings?). =head1 THE RECORDS Pump- Release Date Notes kin (by no means Holder comprehensive, see Changes* for details) ====================================================================== Larry 0 Classified. Don't ask. Larry 1.000 1987-Dec-18 1.001..10 1988-Jan-30 1.011..14 1988-Feb-02 Schwern 1.0.15 2002-Dec-18 Modernization Richard 1.0_16 2003-Dec-18 Larry 2.000 1988-Jun-05 2.001 1988-Jun-28 Larry 3.000 1989-Oct-18 3.001 1989-Oct-26 3.002..4 1989-Nov-11 3.005 1989-Nov-18 3.006..8 1989-Dec-22 3.009..13 1990-Mar-02 3.014 1990-Mar-13 3.015 1990-Mar-14 3.016..18 1990-Mar-28 3.019..27 1990-Aug-10 User subs. 3.028 1990-Aug-14 3.029..36 1990-Oct-17 3.037 1990-Oct-20 3.040 1990-Nov-10 3.041 1990-Nov-13 3.042..43 1991-Jan-?? 3.044 1991-Jan-12 Larry 4.000 1991-Mar-21 4.001..3 1991-Apr-12 4.004..9 1991-Jun-07 4.010 1991-Jun-10 4.011..18 1991-Nov-05 4.019 1991-Nov-11 Stable. 4.020..33 1992-Jun-08 4.034 1992-Jun-11 4.035 1992-Jun-23 Larry 4.036 1993-Feb-05 Very stable. 5.000alpha1 1993-Jul-31 5.000alpha2 1993-Aug-16 5.000alpha3 1993-Oct-10 5.000alpha4 1993-???-?? 5.000alpha5 1993-???-?? 5.000alpha6 1994-Mar-18 5.000alpha7 1994-Mar-25 Andy 5.000alpha8 1994-Apr-04 Larry 5.000alpha9 1994-May-05 ext appears. 5.000alpha10 1994-Jun-11 5.000alpha11 1994-Jul-01 Andy 5.000a11a 1994-Jul-07 To fit 14. 5.000a11b 1994-Jul-14 5.000a11c 1994-Jul-19 5.000a11d 1994-Jul-22 Larry 5.000alpha12 1994-Aug-04 Andy 5.000a12a 1994-Aug-08 5.000a12b 1994-Aug-15 5.000a12c 1994-Aug-22 5.000a12d 1994-Aug-22 5.000a12e 1994-Aug-22 5.000a12f 1994-Aug-24 5.000a12g 1994-Aug-24 5.000a12h 1994-Aug-24 Larry 5.000beta1 1994-Aug-30 Andy 5.000b1a 1994-Sep-06 Larry 5.000beta2 1994-Sep-14 Core slushified. Andy 5.000b2a 1994-Sep-14 5.000b2b 1994-Sep-17 5.000b2c 1994-Sep-17 Larry 5.000beta3 1994-Sep-?? Andy 5.000b3a 1994-Sep-18 5.000b3b 1994-Sep-22 5.000b3c 1994-Sep-23 5.000b3d 1994-Sep-27 5.000b3e 1994-Sep-28 5.000b3f 1994-Sep-30 5.000b3g 1994-Oct-04 Andy 5.000b3h 1994-Oct-07 Larry? 5.000gamma 1994-Oct-13? Larry 5.000 1994-Oct-17 Andy 5.000a 1994-Dec-19 5.000b 1995-Jan-18 5.000c 1995-Jan-18 5.000d 1995-Jan-18 5.000e 1995-Jan-18 5.000f 1995-Jan-18 5.000g 1995-Jan-18 5.000h 1995-Jan-18 5.000i 1995-Jan-26 5.000j 1995-Feb-07 5.000k 1995-Feb-11 5.000l 1995-Feb-21 5.000m 1995-Feb-28 5.000n 1995-Mar-07 5.000o 1995-Mar-13? Larry 5.001 1995-Mar-13 Andy 5.001a 1995-Mar-15 5.001b 1995-Mar-31 5.001c 1995-Apr-07 5.001d 1995-Apr-14 5.001e 1995-Apr-18 Stable. 5.001f 1995-May-31 5.001g 1995-May-25 5.001h 1995-May-25 5.001i 1995-May-30 5.001j 1995-Jun-05 5.001k 1995-Jun-06 5.001l 1995-Jun-06 Stable. 5.001m 1995-Jul-02 Very stable. 5.001n 1995-Oct-31 Very unstable. 5.002beta1 1995-Nov-21 5.002b1a 1995-Dec-04 5.002b1b 1995-Dec-04 5.002b1c 1995-Dec-04 5.002b1d 1995-Dec-04 5.002b1e 1995-Dec-08 5.002b1f 1995-Dec-08 Tom 5.002b1g 1995-Dec-21 Doc release. Andy 5.002b1h 1996-Jan-05 5.002b2 1996-Jan-14 Larry 5.002b3 1996-Feb-02 Andy 5.002gamma 1996-Feb-11 Larry 5.002delta 1996-Feb-27 Larry 5.002 1996-Feb-29 Prototypes. Charles 5.002_01 1996-Mar-25 5.003 1996-Jun-25 Security release. 5.003_01 1996-Jul-31 Nick 5.003_02 1996-Aug-10 Andy 5.003_03 1996-Aug-28 5.003_04 1996-Sep-02 5.003_05 1996-Sep-12 5.003_06 1996-Oct-07 5.003_07 1996-Oct-10 Chip 5.003_08 1996-Nov-19 5.003_09 1996-Nov-26 5.003_10 1996-Nov-29 5.003_11 1996-Dec-06 5.003_12 1996-Dec-19 5.003_13 1996-Dec-20 5.003_14 1996-Dec-23 5.003_15 1996-Dec-23 5.003_16 1996-Dec-24 5.003_17 1996-Dec-27 5.003_18 1996-Dec-31 5.003_19 1997-Jan-04 5.003_20 1997-Jan-07 5.003_21 1997-Jan-15 5.003_22 1997-Jan-16 5.003_23 1997-Jan-25 5.003_24 1997-Jan-29 5.003_25 1997-Feb-04 5.003_26 1997-Feb-10 5.003_27 1997-Feb-18 5.003_28 1997-Feb-21 5.003_90 1997-Feb-25 Ramping up to the 5.004 release. 5.003_91 1997-Mar-01 5.003_92 1997-Mar-06 5.003_93 1997-Mar-10 5.003_94 1997-Mar-22 5.003_95 1997-Mar-25 5.003_96 1997-Apr-01 5.003_97 1997-Apr-03 Fairly widely used. 5.003_97a 1997-Apr-05 5.003_97b 1997-Apr-08 5.003_97c 1997-Apr-10 5.003_97d 1997-Apr-13 5.003_97e 1997-Apr-15 5.003_97f 1997-Apr-17 5.003_97g 1997-Apr-18 5.003_97h 1997-Apr-24 5.003_97i 1997-Apr-25 5.003_97j 1997-Apr-28 5.003_98 1997-Apr-30 5.003_99 1997-May-01 5.003_99a 1997-May-09 p54rc1 1997-May-12 Release Candidates. p54rc2 1997-May-14 Chip 5.004 1997-May-15 A major maintenance release. Tim 5.004_01-t1 1997-???-?? The 5.004 maintenance track. 5.004_01-t2 1997-Jun-11 aka perl5.004m1t2 5.004_01 1997-Jun-13 5.004_01_01 1997-Jul-29 aka perl5.004m2t1 5.004_01_02 1997-Aug-01 aka perl5.004m2t2 5.004_01_03 1997-Aug-05 aka perl5.004m2t3 5.004_02 1997-Aug-07 5.004_02_01 1997-Aug-12 aka perl5.004m3t1 5.004_03-t2 1997-Aug-13 aka perl5.004m3t2 5.004_03 1997-Sep-05 5.004_04-t1 1997-Sep-19 aka perl5.004m4t1 5.004_04-t2 1997-Sep-23 aka perl5.004m4t2 5.004_04-t3 1997-Oct-10 aka perl5.004m4t3 5.004_04-t4 1997-Oct-14 aka perl5.004m4t4 5.004_04 1997-Oct-15 5.004_04-m1 1998-Mar-04 (5.004m5t1) Maint. trials for 5.004_05. 5.004_04-m2 1998-May-01 5.004_04-m3 1998-May-15 5.004_04-m4 1998-May-19 5.004_05-MT5 1998-Jul-21 5.004_05-MT6 1998-Oct-09 5.004_05-MT7 1998-Nov-22 5.004_05-MT8 1998-Dec-03 Chip 5.004_05-MT9 1999-Apr-26 5.004_05 1999-Apr-29 Malcolm 5.004_50 1997-Sep-09 The 5.005 development track. 5.004_51 1997-Oct-02 5.004_52 1997-Oct-15 5.004_53 1997-Oct-16 5.004_54 1997-Nov-14 5.004_55 1997-Nov-25 5.004_56 1997-Dec-18 5.004_57 1998-Feb-03 5.004_58 1998-Feb-06 5.004_59 1998-Feb-13 5.004_60 1998-Feb-20 5.004_61 1998-Feb-27 5.004_62 1998-Mar-06 5.004_63 1998-Mar-17 5.004_64 1998-Apr-03 5.004_65 1998-May-15 5.004_66 1998-May-29 Sarathy 5.004_67 1998-Jun-15 5.004_68 1998-Jun-23 5.004_69 1998-Jun-29 5.004_70 1998-Jul-06 5.004_71 1998-Jul-09 5.004_72 1998-Jul-12 5.004_73 1998-Jul-13 5.004_74 1998-Jul-14 5.005 beta candidate. 5.004_75 1998-Jul-15 5.005 beta1. 5.004_76 1998-Jul-21 5.005 beta2. Sarathy 5.005 1998-Jul-22 Oneperl. Sarathy 5.005_01 1998-Jul-27 The 5.005 maintenance track. 5.005_02-T1 1998-Aug-02 5.005_02-T2 1998-Aug-05 5.005_02 1998-Aug-08 Graham 5.005_03-MT1 1998-Nov-30 5.005_03-MT2 1999-Jan-04 5.005_03-MT3 1999-Jan-17 5.005_03-MT4 1999-Jan-26 5.005_03-MT5 1999-Jan-28 5.005_03-MT6 1999-Mar-05 5.005_03 1999-Mar-28 Leon 5.005_04-RC1 2004-Feb-05 5.005_04-RC2 2004-Feb-18 5.005_04 2004-Feb-23 5.005_05-RC1 2009-Feb-16 Sarathy 5.005_50 1998-Jul-26 The 5.6 development track. 5.005_51 1998-Aug-10 5.005_52 1998-Sep-25 5.005_53 1998-Oct-31 5.005_54 1998-Nov-30 5.005_55 1999-Feb-16 5.005_56 1999-Mar-01 5.005_57 1999-May-25 5.005_58 1999-Jul-27 5.005_59 1999-Aug-02 5.005_60 1999-Aug-02 5.005_61 1999-Aug-20 5.005_62 1999-Oct-15 5.005_63 1999-Dec-09 5.5.640 2000-Feb-02 5.5.650 2000-Feb-08 beta1 5.5.660 2000-Feb-22 beta2 5.5.670 2000-Feb-29 beta3 5.6.0-RC1 2000-Mar-09 Release candidate 1. 5.6.0-RC2 2000-Mar-14 Release candidate 2. 5.6.0-RC3 2000-Mar-21 Release candidate 3. Sarathy 5.6.0 2000-Mar-22 Sarathy 5.6.1-TRIAL1 2000-Dec-18 The 5.6 maintenance track. 5.6.1-TRIAL2 2001-Jan-31 5.6.1-TRIAL3 2001-Mar-19 5.6.1-foolish 2001-Apr-01 The "fools-gold" release. 5.6.1 2001-Apr-08 Rafael 5.6.2-RC1 2003-Nov-08 5.6.2 2003-Nov-15 Fix new build issues Jarkko 5.7.0 2000-Sep-02 The 5.7 track: Development. 5.7.1 2001-Apr-09 5.7.2 2001-Jul-13 Virtual release candidate 0. 5.7.3 2002-Mar-05 5.8.0-RC1 2002-Jun-01 5.8.0-RC2 2002-Jun-21 5.8.0-RC3 2002-Jul-13 Jarkko 5.8.0 2002-Jul-18 Jarkko 5.8.1-RC1 2003-Jul-10 The 5.8 maintenance track 5.8.1-RC2 2003-Jul-11 5.8.1-RC3 2003-Jul-30 5.8.1-RC4 2003-Aug-01 5.8.1-RC5 2003-Sep-22 5.8.1 2003-Sep-25 Nicholas 5.8.2-RC1 2003-Oct-27 5.8.2-RC2 2003-Nov-03 5.8.2 2003-Nov-05 5.8.3-RC1 2004-Jan-07 5.8.3 2004-Jan-14 5.8.4-RC1 2004-Apr-05 5.8.4-RC2 2004-Apr-15 5.8.4 2004-Apr-21 5.8.5-RC1 2004-Jul-06 5.8.5-RC2 2004-Jul-08 5.8.5 2004-Jul-19 5.8.6-RC1 2004-Nov-11 5.8.6 2004-Nov-27 5.8.7-RC1 2005-May-18 5.8.7 2005-May-30 5.8.8-RC1 2006-Jan-20 5.8.8 2006-Jan-31 5.8.9-RC1 2008-Nov-10 5.8.9-RC2 2008-Dec-06 5.8.9 2008-Dec-14 Hugo 5.9.0 2003-Oct-27 The 5.9 development track Rafael 5.9.1 2004-Mar-16 5.9.2 2005-Apr-01 5.9.3 2006-Jan-28 5.9.4 2006-Aug-15 5.9.5 2007-Jul-07 5.10.0-RC1 2007-Nov-17 5.10.0-RC2 2007-Nov-25 Rafael 5.10.0 2007-Dec-18 David M 5.10.1-RC1 2009-Aug-06 The 5.10 maintenance track 5.10.1-RC2 2009-Aug-18 5.10.1 2009-Aug-22 Jesse 5.11.0 2009-Oct-02 The 5.11 development track 5.11.1 2009-Oct-20 Leon 5.11.2 2009-Nov-20 Jesse 5.11.3 2009-Dec-20 Ricardo 5.11.4 2010-Jan-20 Steve 5.11.5 2010-Feb-20 Jesse 5.12.0-RC0 2010-Mar-21 5.12.0-RC1 2010-Mar-29 5.12.0-RC2 2010-Apr-01 5.12.0-RC3 2010-Apr-02 5.12.0-RC4 2010-Apr-06 5.12.0-RC5 2010-Apr-09 Jesse 5.12.0 2010-Apr-12 Jesse 5.12.1-RC2 2010-May-13 The 5.12 maintenance track 5.12.1-RC1 2010-May-09 5.12.1 2010-May-16 5.12.2-RC2 2010-Aug-31 5.12.2 2010-Sep-06 Ricardo 5.12.3-RC1 2011-Jan-09 Ricardo 5.12.3-RC2 2011-Jan-14 Ricardo 5.12.3-RC3 2011-Jan-17 Ricardo 5.12.3 2011-Jan-21 Leon 5.12.4-RC1 2011-Jun-08 Leon 5.12.4 2011-Jun-20 Dominic 5.12.5 2012-Nov-10 Leon 5.13.0 2010-Apr-20 The 5.13 development track Ricardo 5.13.1 2010-May-20 Matt 5.13.2 2010-Jun-22 David G 5.13.3 2010-Jul-20 Florian 5.13.4 2010-Aug-20 Steve 5.13.5 2010-Sep-19 Miyagawa 5.13.6 2010-Oct-20 BinGOs 5.13.7 2010-Nov-20 Zefram 5.13.8 2010-Dec-20 Jesse 5.13.9 2011-Jan-20 Ævar 5.13.10 2011-Feb-20 Florian 5.13.11 2011-Mar-20 Jesse 5.14.0RC1 2011-Apr-20 Jesse 5.14.0RC2 2011-May-04 Jesse 5.14.0RC3 2011-May-11 Jesse 5.14.0 2011-May-14 The 5.14 maintenance track Jesse 5.14.1 2011-Jun-16 Florian 5.14.2-RC1 2011-Sep-19 5.14.2 2011-Sep-26 Dominic 5.14.3 2012-Oct-12 David M 5.14.4-RC1 2013-Mar-05 David M 5.14.4-RC2 2013-Mar-07 David M 5.14.4 2013-Mar-10 David G 5.15.0 2011-Jun-20 The 5.15 development track Zefram 5.15.1 2011-Jul-20 Ricardo 5.15.2 2011-Aug-20 Stevan 5.15.3 2011-Sep-20 Florian 5.15.4 2011-Oct-20 Steve 5.15.5 2011-Nov-20 Dave R 5.15.6 2011-Dec-20 BinGOs 5.15.7 2012-Jan-20 Max M 5.15.8 2012-Feb-20 Abigail 5.15.9 2012-Mar-20 Ricardo 5.16.0-RC0 2012-May-10 Ricardo 5.16.0-RC1 2012-May-14 Ricardo 5.16.0-RC2 2012-May-15 Ricardo 5.16.0 2012-May-20 The 5.16 maintenance track Ricardo 5.16.1 2012-Aug-08 Ricardo 5.16.2 2012-Nov-01 Ricardo 5.16.3-RC1 2013-Mar-06 Ricardo 5.16.3 2013-Mar-11 Zefram 5.17.0 2012-May-26 The 5.17 development track Jesse L 5.17.1 2012-Jun-20 TonyC 5.17.2 2012-Jul-20 Steve 5.17.3 2012-Aug-20 Florian 5.17.4 2012-Sep-20 Florian 5.17.5 2012-Oct-20 Ricardo 5.17.6 2012-Nov-20 Dave R 5.17.7 2012-Dec-18 Aaron 5.17.8 2013-Jan-20 BinGOs 5.17.9 2013-Feb-20 Max M 5.17.10 2013-Mar-21 Ricardo 5.17.11 2013-Apr-20 Ricardo 5.18.0-RC1 2013-May-11 The 5.18 maintenance track Ricardo 5.18.0-RC2 2013-May-12 Ricardo 5.18.0-RC3 2013-May-13 Ricardo 5.18.0-RC4 2013-May-15 Ricardo 5.18.0 2013-May-18 Ricardo 5.18.1-RC1 2013-Aug-01 Ricardo 5.18.1-RC2 2013-Aug-03 Ricardo 5.18.1-RC3 2013-Aug-08 Ricardo 5.18.1 2013-Aug-12 Ricardo 5.18.2 2014-Jan-06 Ricardo 5.18.3-RC1 2014-Sep-17 Ricardo 5.18.3-RC2 2014-Sep-27 Ricardo 5.18.3 2014-Oct-01 Ricardo 5.18.4 2014-Oct-01 Ricardo 5.19.0 2013-May-20 The 5.19 development track David G 5.19.1 2013-Jun-21 Aristotle 5.19.2 2013-Jul-22 Steve 5.19.3 2013-Aug-20 Steve 5.19.4 2013-Sep-20 Steve 5.19.5 2013-Oct-20 BinGOs 5.19.6 2013-Nov-20 Abigail 5.19.7 2013-Dec-20 Ricardo 5.19.8 2014-Jan-20 TonyC 5.19.9 2014-Feb-20 Aaron 5.19.10 2014-Mar-20 Steve 5.19.11 2014-Apr-20 Ricardo 5.20.0-RC1 2014-May-16 The 5.20 maintenance track Ricardo 5.20.0 2014-May-27 Steve 5.20.1-RC1 2014-Aug-25 Steve 5.20.1-RC2 2014-Sep-07 Steve 5.20.1 2014-Sep-14 Steve 5.20.2-RC1 2015-Jan-31 Steve 5.20.2 2015-Feb-14 Steve 5.20.3-RC1 2015-Aug-22 Steve 5.20.3-RC2 2015-Aug-29 Steve 5.20.3 2015-Sep-12 Ricardo 5.21.0 2014-May-27 The 5.21 development track Matthew H 5.21.1 2014-Jun-20 Abigail 5.21.2 2014-Jul-20 Peter 5.21.3 2014-Aug-20 Steve 5.21.4 2014-Sep-20 Abigail 5.21.5 2014-Oct-20 BinGOs 5.21.6 2014-Nov-20 Max M 5.21.7 2014-Dec-20 Matthew H 5.21.8 2015-Jan-20 Sawyer X 5.21.9 2015-Feb-20 Steve 5.21.10 2015-Mar-20 Steve 5.21.11 2015-Apr-20 Ricardo 5.22.0-RC1 2015-May-19 The 5.22 maintenance track Ricardo 5.22.0-RC2 2015-May-21 Ricardo 5.22.0 2015-Jun-01 Steve 5.22.1-RC1 2015-Oct-31 Steve 5.22.1-RC2 2015-Nov-15 Steve 5.22.1-RC3 2015-Dec-02 Steve 5.22.1-RC4 2015-Dec-08 Steve 5.22.1 2015-Dec-13 Steve 5.22.2-RC1 2016-Apr-10 Steve 5.22.2 2016-Apr-29 Steve 5.22.3-RC1 2016-Jul-17 Steve 5.22.3-RC2 2016-Jul-25 Steve 5.22.3-RC3 2016-Aug-11 Steve 5.22.3-RC4 2016-Oct-12 Steve 5.22.3-RC5 2017-Jan-02 Steve 5.22.3 2017-Jan-14 Steve 5.22.4-RC1 2017-Jul-01 Steve 5.22.4 2017-Jul-15 Ricardo 5.23.0 2015-Jun-20 The 5.23 development track Matthew H 5.23.1 2015-Jul-20 Matthew H 5.23.2 2015-Aug-20 Peter 5.23.3 2015-Sep-20 Steve 5.23.4 2015-Oct-20 Abigail 5.23.5 2015-Nov-20 David G 5.23.6 2015-Dec-21 Stevan 5.23.7 2016-Jan-20 Sawyer X 5.23.8 2016-Feb-20 Abigail 5.23.9 2016-Mar-20 Ricardo 5.24.0-RC1 2016-Apr-13 The 5.24 maintenance track Ricardo 5.24.0-RC2 2016-Apr-23 Ricardo 5.24.0-RC3 2016-Apr-26 Ricardo 5.24.0-RC4 2016-May-02 Ricardo 5.24.0-RC5 2016-May-04 Ricardo 5.24.0 2016-May-09 Steve 5.24.1-RC1 2016-Jul-17 Steve 5.24.1-RC2 2016-Jul-25 Steve 5.24.1-RC3 2016-Aug-11 Steve 5.24.1-RC4 2016-Oct-12 Steve 5.24.1-RC5 2017-Jan-02 Steve 5.24.1 2017-Jan-14 Steve 5.24.2-RC1 2017-Jul-01 Steve 5.24.2 2017-Jul-15 Steve 5.24.3-RC1 2017-Sep-10 Steve 5.24.3 2017-Sep-22 Steve 5.24.4-RC1 2018-Mar-24 Steve 5.24.4 2018-Apr-14 Ricardo 5.25.0 2016-May-09 The 5.25 development track Sawyer X 5.25.1 2016-May-20 Matthew H 5.25.2 2016-Jun-20 Steve 5.25.3 2016-Jul-20 BinGOs 5.25.4 2016-Aug-20 Stevan 5.25.5 2016-Sep-20 Aaron 5.25.6 2016-Oct-20 Chad 5.25.7 2016-Nov-20 Sawyer X 5.25.8 2016-Dec-20 Abigail 5.25.9 2017-Jan-20 Renee 5.25.10 2017-Feb-20 Sawyer X 5.25.11 2017-Mar-20 Sawyer X 5.25.12 2017-Apr-20 Sawyer X 5.26.0-RC1 2017-May-11 The 5.26 maintenance track Sawyer X 5.26.0-RC2 2017-May-23 Sawyer X 5.26.0 2017-May-30 Steve 5.26.1-RC1 2017-Sep-10 Steve 5.26.1 2017-Sep-22 Steve 5.26.2-RC1 2018-Mar-24 Steve 5.26.2 2018-Apr-14 Steve 5.26.3-RC1 2018-Nov-08 Steve 5.26.3 2018-Nov-29 Sawyer X 5.27.0 2017-May-31 The 5.27 development track Eric 5.27.1 2017-Jun-20 Aaron 5.27.2 2017-Jul-20 Matthew H 5.27.3 2017-Aug-21 John 5.27.4 2017-Sep-20 Steve 5.27.5 2017-Oct-20 Ether 5.27.6 2017-Nov-20 BinGOs 5.27.7 2017-Dec-20 Abigail 5.27.8 2018-Jan-20 Renee 5.27.9 2018-Feb-20 Todd 5.27.10 2018-Mar-20 Sawyer X 5.27.11 2018-Apr-20 Sawyer X 5.28.0-RC1 2018-May-21 The 5.28 maintenance track Sawyer X 5.28.0-RC2 2018-Jun-06 Sawyer X 5.28.0-RC3 2018-Jun-18 Sawyer X 5.28.0-RC4 2018-Jun-19 Sawyer X 5.28.0 2018-Jun-22 Steve 5.28.1-RC1 2018-Nov-08 Steve 5.28.1 2018-Nov-29 Steve 5.28.2-RC1 2019-Apr-05 Steve 5.28.2 2019-Apr-19 Steve 5.28.3-RC1 2020-May-18 Steve 5.28.3 2020-Jun-01 Sawyer X 5.29.0 2018-Jun-26 The 5.29 development track Steve 5.29.1 2018-Jul-20 BinGOs 5.29.2 2018-Aug-20 John 5.29.3 2018-Sep-20 Aaron 5.29.4 2018-Oct-20 Ether 5.29.5 2018-Nov-20 Abigail 5.29.6 2018-Dec-18 Abigail 5.29.7 2019-Jan-20 Nicolas R 5.29.8 2019-Feb-20 Zak Elep 5.29.9 2019-Mar-20 Sawyer X 5.29.10 2019-Apr-20 Sawyer X 5.30.0-RC1 2019-May-11 The 5.30 maintenance track Sawyer X 5.30.0-RC2 2019-May-17 Sawyer X 5.30.0 2019-May-22 Steve 5.30.1-RC1 2019-Oct-27 Steve 5.30.1 2019-Nov-10 Steve 5.30.2-RC1 2020-Feb-29 Steve 5.30.2 2020-Mar-14 Steve 5.30.3-RC1 2020-May-18 Steve 5.30.3 2020-Jun-01 Sawyer X 5.31.0 2019-May-24 The 5.31 development track Ether 5.31.1 2019-Jun-20 Steve 5.31.2 2019-Jul-20 Tom H 5.31.3 2019-Aug-20 Max M 5.31.4 2019-Sep-20 Steve 5.31.5 2019-Oct-20 BinGOs 5.31.6 2019-Nov-20 Nicolas R 5.31.7 2019-Dec-20 Matthew H 5.31.8 2020-Jan-20 Renee 5.31.9 2020-Feb-20 Sawyer X 5.31.10 2020-Mar-20 Sawyer X 5.31.11 2020-Apr-28 Sawyer X 5.32.0-RC0 2020-May-30 The 5.32 maintenance track Sawyer X 5.32.0-RC1 2020-Jun-07 Sawyer X 5.32.0 2020-Jun-20 Steve 5.32.1-RC1 2021-Jan-09 Steve 5.32.1 2021-Jan-23 Sawyer X 5.33.0 2020-Jul-17 The 5.33 development track Ether 5.33.1 2020-Aug-20 Sawyer X 5.33.2 2020-Sep-20 Steve 5.33.3 2020-Oct-20 Tom H 5.33.4 2020-Nov-20 Max M 5.33.5 2020-Dec-20 Richard L 5.33.6 2021-Jan-20 =head2 SELECTED RELEASE SIZES For example the notation "core: 212 29" in the release 1.000 means that it had in the core 212 kilobytes, in 29 files. The "core".."doc" are explained below. release core lib ext t doc ====================================================================== 1.000 212 29 - - - - 38 51 62 3 1.014 219 29 - - - - 39 52 68 4 2.000 309 31 2 3 - - 55 57 92 4 2.001 312 31 2 3 - - 55 57 94 4 3.000 508 36 24 11 - - 79 73 156 5 3.044 645 37 61 20 - - 90 74 190 6 4.000 635 37 59 20 - - 91 75 198 4 4.019 680 37 85 29 - - 98 76 199 4 4.036 709 37 89 30 - - 98 76 208 5 5.000alpha2 785 50 114 32 - - 112 86 209 5 5.000alpha3 801 50 117 33 - - 121 87 209 5 5.000alpha9 1022 56 149 43 116 29 125 90 217 6 5.000a12h 978 49 140 49 205 46 152 97 228 9 5.000b3h 1035 53 232 70 216 38 162 94 218 21 5.000 1038 53 250 76 216 38 154 92 536 62 5.001m 1071 54 388 82 240 38 159 95 544 29 5.002 1121 54 661 101 287 43 155 94 847 35 5.003 1129 54 680 102 291 43 166 100 853 35 5.003_07 1231 60 748 106 396 53 213 137 976 39 5.004 1351 60 1230 136 408 51 355 161 1587 55 5.004_01 1356 60 1258 138 410 51 358 161 1587 55 5.004_04 1375 60 1294 139 413 51 394 162 1629 55 5.004_05 1463 60 1435 150 394 50 445 175 1855 59 5.004_51 1401 61 1260 140 413 53 358 162 1594 56 5.004_53 1422 62 1295 141 438 70 394 162 1637 56 5.004_56 1501 66 1301 140 447 74 408 165 1648 57 5.004_59 1555 72 1317 142 448 74 424 171 1678 58 5.004_62 1602 77 1327 144 629 92 428 173 1674 58 5.004_65 1626 77 1358 146 615 92 446 179 1698 60 5.004_68 1856 74 1382 152 619 92 463 187 1784 60 5.004_70 1863 75 1456 154 675 92 494 194 1809 60 5.004_73 1874 76 1467 152 762 102 506 196 1883 61 5.004_75 1877 76 1467 152 770 103 508 196 1896 62 5.005 1896 76 1469 152 795 103 509 197 1945 63 5.005_03 1936 77 1541 153 813 104 551 201 2176 72 5.005_50 1969 78 1842 301 795 103 514 198 1948 63 5.005_53 1999 79 1885 303 806 104 602 224 2002 67 5.005_56 2086 79 1970 307 866 113 672 238 2221 75 5.6.0 2820 79 2626 364 1096 129 863 280 2840 93 5.6.1 2946 78 2921 430 1171 132 1024 304 3330 102 5.6.2 2947 78 3143 451 1247 127 1303 387 3406 102 5.7.0 2977 80 2801 425 1250 132 975 307 3206 100 5.7.1 3351 84 3442 455 1944 167 1334 357 3698 124 5.7.2 3491 87 4858 618 3290 298 1598 449 3910 139 5.7.3 3299 85 4295 537 2196 300 2176 626 4171 120 5.8.0 3489 87 4533 585 2437 331 2588 726 4368 125 5.8.1 3674 90 5104 623 2604 353 2983 836 4625 134 5.8.2 3633 90 5111 623 2623 357 3019 848 4634 135 5.8.3 3625 90 5141 624 2660 363 3083 869 4669 136 5.8.4 3653 90 5170 634 2684 368 3148 885 4689 137 5.8.5 3664 90 4260 303 2707 369 3208 898 4689 138 5.8.6 3690 90 4271 303 3141 396 3411 925 4709 139 5.8.7 3788 90 4322 307 3297 401 3485 964 4744 141 5.8.8 3895 90 4357 314 3409 431 3622 1017 4979 144 5.8.9 4132 93 5508 330 3826 529 4364 1234 5348 152 5.9.0 3657 90 4951 626 2603 354 3011 841 4609 135 5.9.1 3580 90 5196 634 2665 367 3186 889 4725 138 5.9.2 3863 90 4654 312 3283 403 3551 973 4800 142 5.9.3 4096 91 5318 381 4806 597 4272 1214 5139 147 5.9.4 4393 94 5718 415 4578 642 4646 1310 5335 153 5.9.5 4681 96 6849 479 4827 671 5155 1490 5572 159 5.10.0 4710 97 7050 486 4899 673 5275 1503 5673 160 5.10.1 4858 98 7440 519 6195 921 6147 1751 5151 163 5.12.0 4999 100 1146 121 15227 2176 6400 1843 5342 168 5.12.1 5000 100 1146 121 15283 2178 6407 1846 5354 169 5.12.2 5003 100 1146 121 15404 2178 6413 1846 5376 170 5.12.3 5004 100 1146 121 15529 2180 6417 1848 5391 171 5.14.0 5328 104 1100 114 17779 2479 7697 2130 5871 188 5.16.0 5562 109 1077 80 20504 2702 8750 2375 4815 152 5.18.0 5892 113 1088 79 20077 2760 9365 2439 4943 154 5.20.0 6243 115 1187 75 19499 2701 9620 2457 5145 159 5.22.0 7819 115 1284 77 19121 2635 9772 2434 5615 176 5.24.0 7922 113 1287 77 19535 2677 9994 2465 5702 177 5.26.0 9140 121 24925 1200 40643 3017 10514 2614 7854 211 5.28.0 13056 128 27267 1230 41745 3130 10952 2715 8185 218 5.30.0 13535 128 26294 1237 39643 3080 11083 2711 8252 222 5.32.0 14147 127 25562 1255 40869 3098 11334 2734 8407 225 The "core"..."doc" mean the following files from the Perl source code distribution. The glob notation ** means recursively, (.) means regular files. core *.[hcy] lib lib/**/*.p[ml] ext ext/**/*.{[hcyt],xs,pm} (for -5.10.1) or {dist,ext,cpan}/**/*.{[hcyt],xs,pm} (for 5.12.0-) t t/**/*(.) (for 1-5.005_56) or **/*.t (for 5.6.0-5.7.3) doc {README*,INSTALL,*[_.]man{,.?},pod/**/*.pod} Here are some statistics for the other subdirectories and one file in the Perl source distribution for somewhat more selected releases. ====================================================================== Legend: kB # 1.014 2.001 3.044 Configure 31 1 37 1 62 1 eg - - 34 28 47 39 h2pl - - - - 12 12 msdos - - - - 41 13 os2 - - - - 63 22 usub - - - - 21 16 x2p 103 17 104 17 137 17 ====================================================================== 4.000 4.019 4.036 atarist - - - - 113 31 Configure 73 1 83 1 86 1 eg 47 39 47 39 47 39 emacs 67 4 67 4 67 4 h2pl 12 12 12 12 12 12 hints - - 5 42 11 56 msdos 57 15 58 15 60 15 os2 81 29 81 29 113 31 usub 25 7 43 8 43 8 x2p 147 18 152 19 154 19 ====================================================================== 5.000a2 5.000a12h 5.000b3h 5.000 5.001m apollo 8 3 8 3 8 3 8 3 8 3 atarist 113 31 113 31 - - - - - - bench - - 0 1 - - - - - - Bugs 2 5 26 1 - - - - - - dlperl 40 5 - - - - - - - - do 127 71 - - - - - - - - Configure - - 153 1 159 1 160 1 180 1 Doc - - 26 1 75 7 11 1 11 1 eg 79 58 53 44 51 43 54 44 54 44 emacs 67 4 104 6 104 6 104 1 104 6 h2pl 12 12 12 12 12 12 12 12 12 12 hints 11 56 12 46 18 48 18 48 44 56 msdos 60 15 60 15 - - - - - - os2 113 31 113 31 - - - - - - U - - 62 8 112 42 - - - - usub 43 8 - - - - - - - - vms - - 80 7 123 9 184 15 304 20 x2p 171 22 171 21 162 20 162 20 279 20 ====================================================================== 5.002 5.003 5.003_07 Configure 201 1 201 1 217 1 eg 54 44 54 44 54 44 emacs 108 1 108 1 143 1 h2pl 12 12 12 12 12 12 hints 73 59 77 60 90 62 os2 84 17 56 10 117 42 plan9 - - - - 79 15 Porting - - - - 51 1 utils 87 7 88 7 97 7 vms 500 24 475 26 505 27 x2p 280 20 280 20 280 19 ====================================================================== 5.004 5.004_04 5.004_62 5.004_65 5.004_68 beos - - - - - - 1 1 1 1 Configure 225 1 225 1 240 1 248 1 256 1 cygwin32 23 5 23 5 23 5 24 5 24 5 djgpp - - - - 14 5 14 5 14 5 eg 81 62 81 62 81 62 81 62 81 62 emacs 194 1 204 1 212 2 212 2 212 2 h2pl 12 12 12 12 12 12 12 12 12 12 hints 129 69 132 71 144 72 151 74 155 74 os2 121 42 127 42 127 44 129 44 129 44 plan9 82 15 82 15 82 15 82 15 82 15 Porting 94 2 109 4 203 6 234 8 241 9 qnx 1 2 1 2 1 2 1 2 1 2 utils 112 8 118 8 124 8 156 9 159 9 vms 518 34 524 34 538 34 569 34 569 34 win32 285 33 378 36 470 39 493 39 575 41 x2p 281 19 281 19 281 19 282 19 281 19 ====================================================================== 5.004_70 5.004_73 5.004_75 5.005 5.005_03 apollo - - - - - - - - 0 1 beos 1 1 1 1 1 1 1 1 1 1 Configure 256 1 256 1 264 1 264 1 270 1 cygwin32 24 5 24 5 24 5 24 5 24 5 djgpp 14 5 14 5 14 5 14 5 15 5 eg 86 65 86 65 86 65 86 65 86 65 emacs 262 2 262 2 262 2 262 2 274 2 h2pl 12 12 12 12 12 12 12 12 12 12 hints 157 74 157 74 159 74 160 74 179 77 mint - - - - - - - - 4 7 mpeix - - - - 5 3 5 3 5 3 os2 129 44 139 44 142 44 143 44 148 44 plan9 82 15 82 15 82 15 82 15 82 15 Porting 241 9 253 9 259 10 264 12 272 13 qnx 1 2 1 2 1 2 1 2 1 2 utils 160 9 160 9 160 9 160 9 164 9 vms 570 34 572 34 573 34 575 34 583 34 vos - - - - - - - - 156 10 win32 577 41 585 41 585 41 587 41 600 42 x2p 281 19 281 19 281 19 281 19 281 19 ====================================================================== 5.6.0 5.6.1 5.6.2 5.7.3 apollo 8 3 8 3 8 3 8 3 beos 5 2 5 2 5 2 6 4 Configure 346 1 361 1 363 1 394 1 Cross - - - - - - 4 2 djgpp 19 6 19 6 19 6 21 7 eg 112 71 112 71 112 71 - - emacs 303 4 319 4 319 4 319 4 epoc 29 8 35 8 35 8 36 8 h2pl 24 15 24 15 24 15 24 15 hints 242 83 250 84 321 89 272 87 mint 11 9 11 9 11 9 11 9 mpeix 9 4 9 4 9 4 9 4 NetWare - - - - - - 423 57 os2 214 59 224 60 224 60 357 66 plan9 92 17 92 17 92 17 85 15 Porting 361 15 390 16 390 16 425 21 qnx 5 3 5 3 5 3 5 3 utils 228 12 221 11 222 11 267 13 uts - - - - - - 12 3 vmesa 25 4 25 4 25 4 25 4 vms 686 38 627 38 627 38 649 36 vos 227 12 249 15 248 15 281 17 win32 755 41 782 42 801 42 1006 50 x2p 307 20 307 20 307 20 345 20 ====================================================================== 5.8.0 5.8.1 5.8.2 5.8.3 5.8.4 apollo 8 3 8 3 8 3 8 3 8 3 beos 6 4 6 4 6 4 6 4 6 4 Configure 472 1 493 1 493 1 493 1 494 1 Cross 4 2 45 10 45 10 45 10 45 10 djgpp 21 7 21 7 21 7 21 7 21 7 emacs 319 4 329 4 329 4 329 4 329 4 epoc 33 8 33 8 33 8 33 8 33 8 h2pl 24 15 24 15 24 15 24 15 24 15 hints 294 88 321 89 321 89 321 89 348 91 mint 11 9 11 9 11 9 11 9 11 9 mpeix 24 5 25 5 25 5 25 5 25 5 NetWare 488 61 490 61 490 61 490 61 488 61 os2 361 66 445 67 450 67 488 67 488 67 plan9 85 15 325 17 325 17 325 17 321 17 Porting 479 22 537 32 538 32 539 32 538 33 qnx 5 3 5 3 5 3 5 3 5 3 utils 275 15 258 16 258 16 263 19 263 19 uts 12 3 12 3 12 3 12 3 12 3 vmesa 25 4 25 4 25 4 25 4 25 4 vms 648 36 654 36 654 36 656 36 656 36 vos 330 20 335 20 335 20 335 20 335 20 win32 1062 49 1125 49 1127 49 1126 49 1181 56 x2p 347 20 348 20 348 20 348 20 348 20 ====================================================================== 5.8.5 5.8.6 5.8.7 5.8.8 5.8.9 apollo 8 3 8 3 8 3 8 3 8 3 beos 6 4 6 4 8 4 8 4 8 4 Configure 494 1 494 1 495 1 506 1 520 1 Cross 45 10 45 10 45 10 45 10 46 10 djgpp 21 7 21 7 21 7 21 7 21 7 emacs 329 4 329 4 329 4 329 4 406 4 epoc 33 8 33 8 33 8 34 8 35 8 h2pl 24 15 24 15 24 15 24 15 24 15 hints 350 91 352 91 355 94 360 94 387 99 mint 11 9 11 9 11 9 11 9 11 9 mpeix 25 5 25 5 25 5 49 6 49 6 NetWare 488 61 488 61 488 61 490 61 491 61 os2 488 67 488 67 488 67 488 67 552 70 plan9 321 17 321 17 321 17 322 17 324 17 Porting 538 34 548 35 549 35 564 37 625 41 qnx 5 3 5 3 5 3 5 3 5 3 utils 265 19 265 19 266 19 267 19 281 21 uts 12 3 12 3 12 3 12 3 12 3 vmesa 25 4 25 4 25 4 25 4 25 4 vms 657 36 658 36 662 36 664 36 716 35 vos 335 20 335 20 335 20 336 21 345 22 win32 1183 56 1190 56 1199 56 1219 56 1484 68 x2p 349 20 349 20 349 20 349 19 350 19 ====================================================================== 5.9.0 5.9.1 5.9.2 5.9.3 5.9.4 apollo 8 3 8 3 8 3 8 3 8 3 beos 6 4 6 4 8 4 8 4 8 4 Configure 493 1 493 1 495 1 508 1 512 1 Cross 45 10 45 10 45 10 45 10 46 10 djgpp 21 7 21 7 21 7 21 7 21 7 emacs 329 4 329 4 329 4 329 4 329 4 epoc 33 8 33 8 33 8 34 8 34 8 h2pl 24 15 24 15 24 15 24 15 24 15 hints 321 89 346 91 355 94 359 94 366 96 mad - - - - - - - - 174 6 mint 11 9 11 9 11 9 11 9 11 9 mpeix 25 5 25 5 25 5 49 6 49 6 NetWare 489 61 487 61 487 61 489 61 489 61 os2 444 67 488 67 488 67 488 67 488 67 plan9 325 17 321 17 321 17 322 17 323 17 Porting 537 32 536 33 549 36 564 38 576 38 qnx 5 3 5 3 5 3 5 3 5 3 symbian - - - - - - 293 53 293 53 utils 258 16 263 19 268 20 273 23 275 24 uts 12 3 12 3 12 3 12 3 12 3 vmesa 25 4 25 4 25 4 25 4 25 4 vms 660 36 547 33 553 33 661 33 696 33 vos 11 7 11 7 11 7 11 7 11 7 win32 1120 49 1124 51 1191 56 1209 56 1719 90 x2p 348 20 348 20 349 20 349 19 349 19 ====================================================================== 5.9.5 5.10.0 5.10.1 5.12.0 5.12.1 apollo 8 3 8 3 0 3 0 3 0 3 beos 8 4 8 4 4 4 4 4 4 4 Configure 518 1 518 1 533 1 536 1 536 1 Cross 122 15 122 15 119 15 118 15 118 15 djgpp 21 7 21 7 17 7 17 7 17 7 emacs 329 4 406 4 402 4 402 4 402 4 epoc 34 8 35 8 31 8 31 8 31 8 h2pl 24 15 24 15 12 15 12 15 12 15 hints 377 98 381 98 385 100 368 97 368 97 mad 182 8 182 8 174 8 174 8 174 8 mint 11 9 11 9 3 9 - - - - mpeix 49 6 49 6 45 6 45 6 45 6 NetWare 489 61 489 61 465 61 466 61 466 61 os2 552 70 552 70 507 70 507 70 507 70 plan9 324 17 324 17 316 17 316 17 316 17 Porting 627 40 632 40 933 53 749 54 749 54 qnx 5 3 5 4 1 4 1 4 1 4 symbian 300 54 300 54 290 54 288 54 288 54 utils 260 26 264 27 268 27 269 27 269 27 uts 12 3 12 3 8 3 8 3 8 3 vmesa 25 4 25 4 21 4 21 4 21 4 vms 690 32 722 32 693 30 645 18 645 18 vos 19 8 19 8 16 8 16 8 16 8 win32 1482 68 1485 68 1497 70 1841 73 1841 73 x2p 349 19 349 19 345 19 345 19 345 19 ====================================================================== 5.12.2 5.12.3 5.14.0 5.16.0 5.18.0 apollo 0 3 0 3 - - - - - - beos 4 4 4 4 5 4 5 4 - - Configure 536 1 536 1 539 1 547 1 550 1 Cross 118 15 118 15 118 15 118 15 118 15 djgpp 17 7 17 7 18 7 18 7 18 7 emacs 402 4 402 4 - - - - - - epoc 31 8 31 8 32 8 30 8 - - h2pl 12 15 12 15 15 15 15 15 13 15 hints 368 97 368 97 370 96 371 96 354 91 mad 174 8 174 8 176 8 176 8 174 8 mpeix 45 6 45 6 46 6 46 6 - - NetWare 466 61 466 61 473 61 472 61 469 61 os2 507 70 507 70 518 70 519 70 510 70 plan9 316 17 316 17 319 17 319 17 318 17 Porting 750 54 750 54 855 60 1093 69 1149 70 qnx 1 4 1 4 2 4 2 4 1 4 symbian 288 54 288 54 292 54 292 54 290 54 utils 269 27 269 27 249 29 245 30 246 31 uts 8 3 8 3 9 3 9 3 - - vmesa 21 4 21 4 22 4 22 4 - - vms 646 18 644 18 639 17 571 15 564 15 vos 16 8 16 8 17 8 9 7 8 7 win32 1841 73 1841 73 1833 72 1655 67 1157 62 x2p 345 19 345 19 346 19 345 19 344 20 ====================================================================== 5.20.0 5.22.0 5.24.0 Configure 552 1 570 1 586 1 Cross 118 15 118 15 118 15 djgpp 18 7 17 7 17 7 h2pl 13 15 13 15 13 15 hints 355 90 356 87 362 87 mad 174 8 - - - - NetWare 467 61 466 61 467 61 os2 510 70 510 70 510 70 plan9 316 17 317 17 314 17 Porting 1204 68 1393 71 1321 71 qnx 1 4 1 4 1 4 symbian 290 54 291 54 292 54 utils 241 27 242 27 679 53 vms 538 12 532 12 524 12 vos 8 7 8 7 8 7 win32 1183 64 1201 64 1268 65 x2p 341 19 - - - - ====================================================================== 5.26.0 5.28.0 5.30.0 Configure 593 1 580 1 587 1 Cross 122 15 125 15 126 15 djgpp 21 7 21 7 21 7 h2pl 24 15 24 15 24 15 hints 376 87 364 85 372 86 mad - - - - - - NetWare 499 61 493 61 493 61 os2 552 70 552 70 552 70 plan9 322 17 309 17 308 17 Porting 1380 73 1462 75 1460 74 qnx 5 4 5 4 5 4 symbian 315 54 315 54 315 54 utils 578 50 584 50 587 50 vms 527 12 526 12 526 12 vos 12 7 12 7 12 7 win32 1313 65 1326 65 1331 65 x2p - - - - - - 5.32.0 Configure: 588 1 Cross : 126 15 djgpp : 21 7 h2pl : 24 15 hints : 363 86 NetWare : 484 61 os2 : 552 70 plan9 : 308 17 Porting : 1482 75 qnx : 5 4 symbian : 307 54 utils : 583 52 vms : 527 12 vos : 12 7 win32 : 1011 47 =head2 SELECTED PATCH SIZES The "diff lines kB" means that for example the patch 5.003_08, to be applied on top of the 5.003_07 (or whatever was before the 5.003_08) added lines for 110 kilobytes, it removed lines for 19 kilobytes, and changed lines for 424 kilobytes. Just the lines themselves are counted, not their context. The "+ - !" become from the diff(1) context diff output format. Pump- Release Date diff lines kB king ------------- + - ! ====================================================================== Chip 5.003_08 1996-Nov-19 110 19 424 5.003_09 1996-Nov-26 38 9 248 5.003_10 1996-Nov-29 29 2 27 5.003_11 1996-Dec-06 73 12 165 5.003_12 1996-Dec-19 275 6 436 5.003_13 1996-Dec-20 95 1 56 5.003_14 1996-Dec-23 23 7 333 5.003_15 1996-Dec-23 0 0 1 5.003_16 1996-Dec-24 12 3 50 5.003_17 1996-Dec-27 19 1 14 5.003_18 1996-Dec-31 21 1 32 5.003_19 1997-Jan-04 80 3 85 5.003_20 1997-Jan-07 18 1 146 5.003_21 1997-Jan-15 38 10 221 5.003_22 1997-Jan-16 4 0 18 5.003_23 1997-Jan-25 71 15 119 5.003_24 1997-Jan-29 426 1 20 5.003_25 1997-Feb-04 21 8 169 5.003_26 1997-Feb-10 16 1 15 5.003_27 1997-Feb-18 32 10 38 5.003_28 1997-Feb-21 58 4 66 5.003_90 1997-Feb-25 22 2 34 5.003_91 1997-Mar-01 37 1 39 5.003_92 1997-Mar-06 16 3 69 5.003_93 1997-Mar-10 12 3 15 5.003_94 1997-Mar-22 407 7 200 5.003_95 1997-Mar-25 41 1 37 5.003_96 1997-Apr-01 283 5 261 5.003_97 1997-Apr-03 13 2 34 5.003_97a 1997-Apr-05 57 1 27 5.003_97b 1997-Apr-08 14 1 20 5.003_97c 1997-Apr-10 20 1 16 5.003_97d 1997-Apr-13 8 0 16 5.003_97e 1997-Apr-15 15 4 46 5.003_97f 1997-Apr-17 7 1 33 5.003_97g 1997-Apr-18 6 1 42 5.003_97h 1997-Apr-24 23 3 68 5.003_97i 1997-Apr-25 23 1 31 5.003_97j 1997-Apr-28 36 1 49 5.003_98 1997-Apr-30 171 12 539 5.003_99 1997-May-01 6 0 7 5.003_99a 1997-May-09 36 2 61 p54rc1 1997-May-12 8 1 11 p54rc2 1997-May-14 6 0 40 5.004 1997-May-15 4 0 4 Tim 5.004_01 1997-Jun-13 222 14 57 5.004_02 1997-Aug-07 112 16 119 5.004_03 1997-Sep-05 109 0 17 5.004_04 1997-Oct-15 66 8 173 =head3 The patch-free era In more modern times, named releases don't come as often, and as progress can be followed (nearly) instantly (with rsync, and since late 2008, git) patches between versions are no longer provided. However, that doesn't keep us from calculating how large a patch could have been. Which is shown in the table below. Unless noted otherwise, the size mentioned is the patch to bring version x.y.z to x.y.z+1. Sarathy 5.6.1 2001-Apr-08 531 44 651 Rafael 5.6.2 2003-Nov-15 20 11 1819 Jarkko 5.8.0 2002-Jul-18 1205 31 471 From 5.7.3 5.8.1 2003-Sep-25 243 102 6162 Nicholas 5.8.2 2003-Nov-05 10 50 788 5.8.3 2004-Jan-14 31 13 360 5.8.4 2004-Apr-21 33 8 299 5.8.5 2004-Jul-19 11 19 255 5.8.6 2004-Nov-27 35 3 192 5.8.7 2005-May-30 75 34 778 5.8.8 2006-Jan-31 131 42 1251 5.8.9 2008-Dec-14 340 132 12988 Hugo 5.9.0 2003-Oct-27 281 168 7132 From 5.8.0 Rafael 5.9.1 2004-Mar-16 57 250 2107 5.9.2 2005-Apr-01 720 57 858 5.9.3 2006-Jan-28 1124 102 1906 5.9.4 2006-Aug-15 896 60 862 5.9.5 2007-Jul-07 1149 128 1062 5.10.0 2007-Dec-18 50 31 13111 From 5.9.5 =head1 THE KEEPERS OF THE RECORDS Jarkko Hietaniemi <F<jhi@iki.fi>>. Thanks to the collective memory of the Perlfolk. In addition to the Keepers of the Pumpkin also Alan Champion, Mark Dominus, Andreas KE<0xf6>nig, John Macdonald, Matthias Neeracher, Jeff Okamoto, Michael Peppler, Randal Schwartz, and Paul D. Smith sent corrections and additions. Abigail added file and patch size data for the 5.6.0 - 5.10 era. =cut perl5203delta.pod 0000644 00000022260 15125556335 0007552 0 ustar 00 =encoding utf8 =head1 NAME perl5203delta - what is new for perl v5.20.3 =head1 DESCRIPTION This document describes differences between the 5.20.2 release and the 5.20.3 release. If you are upgrading from an earlier release such as 5.20.1, first read L<perl5202delta>, which describes differences between 5.20.1 and 5.20.2. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.20.2. If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Errno> has been upgraded from version 1.20_05 to 1.20_06. Add B<-P> to the pre-processor command-line on GCC 5. GCC added extra line directives, breaking parsing of error code definitions. L<[perl #123784]|https://rt.perl.org/Ticket/Display.html?id=123784> =item * L<Module::CoreList> has been upgraded from version 5.20150214 to 5.20150822. Updated to cover the latest releases of Perl. =item * L<perl5db.pl> has been upgraded from 1.44 to 1.44_01. The debugger would cause an assertion failure. L<[perl #124127]|https://rt.perl.org/Ticket/Display.html?id=124127> =back =head1 Documentation =head2 Changes to Existing Documentation =head3 L<perlfunc> =over 4 =item * Mention that L<C<study()>|perlfunc/study> is currently a no-op. =back =head3 L<perlguts> =over 4 =item * The OOK example has been updated to account for COW changes and a change in the storage of the offset. =back =head3 L<perlhacktips> =over 4 =item * Documentation has been added illustrating the perils of assuming the contents of static memory pointed to by the return values of Perl wrappers for C library functions doesn't change. =back =head3 L<perlpodspec> =over 4 =item * The specification of the POD language is changing so that the default encoding of PODs that aren't in UTF-8 (unless otherwise indicated) is CP1252 instead of ISO-8859-1 (Latin1). =back =head1 Utility Changes =head2 L<h2ph> =over 4 =item * B<h2ph> now handles hexadecimal constants in the compiler's predefined macro definitions, as visible in C<$Config{cppsymbols}>. L<[perl #123784]|https://rt.perl.org/Ticket/Display.html?id=123784> =back =head1 Testing =over 4 =item * F<t/perf/taint.t> has been added to see if optimisations with taint issues are keeping things fast. =item * F<t/porting/re_context.t> has been added to test that L<utf8> and its dependencies only use the subset of the C<$1..$n> capture vars that Perl_save_re_context() is hard-coded to localize, because that function has no efficient way of determining at runtime what vars to localize. =back =head1 Platform Support =head2 Platform-Specific Notes =over 4 =item Win32 =over 4 =item * Previously, when compiling with a 64-bit Visual C++, every Perl XS module (including CPAN ones) and Perl aware C file would unconditionally have around a dozen warnings from F<hv_func.h>. These warnings have been silenced. GCC (all bitness) and 32-bit Visual C++ were not affected. =item * B<miniperl.exe> is now built with B<-fno-strict-aliasing>, allowing 64-bit builds to complete with GCC 4.8. L<[perl #123976]|https://rt.perl.org/Ticket/Display.html?id=123976> =back =back =head1 Selected Bug Fixes =over 4 =item * Repeated global pattern matches in scalar context on large tainted strings were exponentially slow depending on the current match position in the string. L<[perl #123202]|https://rt.perl.org/Ticket/Display.html?id=123202> =item * The original visible value of L<C<$E<sol>>|perlvar/$E<sol>> is now preserved when it is set to an invalid value. Previously if you set C<$/> to a reference to an array, for example, perl would produce a runtime error and not set PL_rs, but Perl code that checked C<$/> would see the array reference. L<[perl #123218]|https://rt.perl.org/Ticket/Display.html?id=123218> =item * Perl 5.14.0 introduced a bug whereby C<eval { LABEL: }> would crash. This has been fixed. L<[perl #123652]|https://rt.perl.org/Ticket/Display.html?id=123652> =item * Extending an array cloned from a parent thread could result in "Modification of a read-only value attempted" errors when attempting to modify the new elements. L<[perl #124127]|https://rt.perl.org/Ticket/Display.html?id=124127> =item * Several cases of data used to store environment variable contents in core C code being potentially overwritten before being used have been fixed. L<[perl #123748]|https://rt.perl.org/Ticket/Display.html?id=123748> =item * UTF-8 variable names used in array indexes, unquoted UTF-8 HERE-document terminators and UTF-8 function names all now work correctly. L<[perl #124113]|https://rt.perl.org/Ticket/Display.html?id=124113> =item * A subtle bug introduced in Perl 5.20.2 involving UTF-8 in regular expressions and sometimes causing a crash has been fixed. A new test script has been added to test this fix; see under L</Testing>. L<[perl #124109]|https://rt.perl.org/Ticket/Display.html?id=124109> =item * Some patterns starting with C</.*..../> matched against long strings have been slow since Perl 5.8, and some of the form C</.*..../i> have been slow since Perl 5.18. They are now all fast again. L<[perl #123743]|https://rt.perl.org/Ticket/Display.html?id=123743> =item * Warning fatality is now ignored when rewinding the stack. This prevents infinite recursion when the now fatal error also causes rewinding of the stack. L<[perl #123398]|https://rt.perl.org/Ticket/Display.html?id=123398> =item * C<setpgrp($nonzero)> (with one argument) was accidentally changed in Perl 5.16 to mean C<setpgrp(0)>. This has been fixed. =item * A crash with C<< %::=(); J->${\"::"} >> has been fixed. L<[perl #125541]|https://rt.perl.org/Ticket/Display.html?id=125541> =item * Regular expression possessive quantifier Perl 5.20 regression now fixed. C<qr/>I<PAT>C<{>I<min>,I<max>C<}+>C</> is supposed to behave identically to C<qr/(?E<gt>>I<PAT>C<{>I<min>,I<max>C<})/>. Since Perl 5.20, this didn't work if I<min> and I<max> were equal. L<[perl #125825]|https://rt.perl.org/Ticket/Display.html?id=125825> =item * Code like C</$a[/> used to read the next line of input and treat it as though it came immediately after the opening bracket. Some invalid code consequently would parse and run, but some code caused crashes, so this is now disallowed. L<[perl #123712]|https://rt.perl.org/Ticket/Display.html?id=123712> =back =head1 Acknowledgements Perl 5.20.3 represents approximately 7 months of development since Perl 5.20.2 and contains approximately 3,200 lines of changes across 99 files from 26 authors. Excluding auto-generated files, documentation and release tools, there were approximately 1,500 lines of changes to 43 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.20.3: Alex Vandiver, Andy Dougherty, Aristotle Pagaltzis, Chris 'BinGOs' Williams, Craig A. Berry, Dagfinn Ilmari Mannsåker, Daniel Dragan, David Mitchell, Father Chrysostomos, H.Merijn Brand, James E Keenan, James McCoy, Jarkko Hietaniemi, Karen Etheridge, Karl Williamson, kmx, Lajos Veres, Lukas Mai, Matthew Horsfall, Petr Písař, Randy Stauner, Ricardo Signes, Sawyer X, Steve Hay, Tony Cook, Yves Orton. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at https://rt.perl.org/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlcheat.pod 0000644 00000010600 15125556335 0007226 0 ustar 00 =head1 NAME perlcheat - Perl 5 Cheat Sheet =head1 DESCRIPTION This 'cheat sheet' is a handy reference, meant for beginning Perl programmers. Not everything is mentioned, but 195 features may already be overwhelming. =head2 The sheet CONTEXTS SIGILS ref ARRAYS HASHES void $scalar SCALAR @array %hash scalar @array ARRAY @array[0, 2] @hash{'a', 'b'} list %hash HASH $array[0] $hash{'a'} &sub CODE *glob GLOB SCALAR VALUES FORMAT number, string, ref, glob, undef REFERENCES \ reference $$foo[1] aka $foo->[1] $@%&* dereference $$foo{bar} aka $foo->{bar} [] anon. arrayref ${$$foo[1]}[2] aka $foo->[1]->[2] {} anon. hashref ${$$foo[1]}[2] aka $foo->[1][2] \() list of refs SYNTAX OPERATOR PRECEDENCE foreach (LIST) { } for (a;b;c) { } -> while (e) { } until (e) { } ++ -- if (e) { } elsif (e) { } else { } ** unless (e) { } elsif (e) { } else { } ! ~ \ u+ u- given (e) { when (e) {} default {} } =~ !~ * / % x NUMBERS vs STRINGS FALSE vs TRUE + - . = = undef, "", 0, "0" << >> + . anything else named uops == != eq ne < > <= >= lt gt le ge < > <= >= lt gt le ge == != <=> eq ne cmp ~~ <=> cmp & | ^ REGEX MODIFIERS REGEX METACHARS && /i case insensitive ^ string begin || // /m line based ^$ $ str end (bfr \n) .. ... /s . includes \n + one or more ?: /x /xx ign. wh.space * zero or more = += last goto /p preserve ? zero or one , => /a ASCII /aa safe {3,7} repeat in range list ops /l locale /d dual | alternation not /u Unicode [] character class and /e evaluate /ee rpts \b boundary or xor /g global \z string end /o compile pat once () capture DEBUG (?:p) no capture -MO=Deparse REGEX CHARCLASSES (?#t) comment -MO=Terse . [^\n] (?=p) ZW pos ahead -D## \s whitespace (?!p) ZW neg ahead -d:Trace \w word chars (?<=p) ZW pos behind \K \d digits (?<!p) ZW neg behind CONFIGURATION \pP named property (?>p) no backtrack perl -V:ivsize \h horiz.wh.space (?|p|p)branch reset \R linebreak (?<n>p)named capture \S \W \D \H negate \g{n} ref to named cap \K keep left part FUNCTION RETURN LISTS stat localtime caller SPECIAL VARIABLES 0 dev 0 second 0 package $_ default variable 1 ino 1 minute 1 filename $0 program name 2 mode 2 hour 2 line $/ input separator 3 nlink 3 day 3 subroutine $\ output separator 4 uid 4 month-1 4 hasargs $| autoflush 5 gid 5 year-1900 5 wantarray $! sys/libcall error 6 rdev 6 weekday 6 evaltext $@ eval error 7 size 7 yearday 7 is_require $$ process ID 8 atime 8 is_dst 8 hints $. line number 9 mtime 9 bitmask @ARGV command line args 10 ctime 10 hinthash @INC include paths 11 blksz 3..10 only @_ subroutine args 12 blcks with EXPR %ENV environment =head1 ACKNOWLEDGEMENTS The first version of this document appeared on Perl Monks, where several people had useful suggestions. Thank you, Perl Monks. A special thanks to Damian Conway, who didn't only suggest important changes, but also took the time to count the number of listed features and make a Raku version to show that Perl will stay Perl. =head1 AUTHOR Juerd Waalboer <#####@juerd.nl>, with the help of many Perl Monks. =head1 SEE ALSO =over 4 =item * L<https://perlmonks.org/?node_id=216602> - the original PM post =item * L<https://perlmonks.org/?node_id=238031> - Damian Conway's Raku version =item * L<https://juerd.nl/site.plp/perlcheat> - home of the Perl Cheat Sheet =back perlinterp.pod 0000644 00000101663 15125556335 0007455 0 ustar 00 =encoding utf8 =for comment Consistent formatting of this file is achieved with: perl ./Porting/podtidy pod/perlinterp.pod =head1 NAME perlinterp - An overview of the Perl interpreter =head1 DESCRIPTION This document provides an overview of how the Perl interpreter works at the level of C code, along with pointers to the relevant C source code files. =head1 ELEMENTS OF THE INTERPRETER The work of the interpreter has two main stages: compiling the code into the internal representation, or bytecode, and then executing it. L<perlguts/Compiled code> explains exactly how the compilation stage happens. Here is a short breakdown of perl's operation: =head2 Startup The action begins in F<perlmain.c>. (or F<miniperlmain.c> for miniperl) This is very high-level code, enough to fit on a single screen, and it resembles the code found in L<perlembed>; most of the real action takes place in F<perl.c> F<perlmain.c> is generated by C<ExtUtils::Miniperl> from F<miniperlmain.c> at make time, so you should make perl to follow this along. First, F<perlmain.c> allocates some memory and constructs a Perl interpreter, along these lines: 1 PERL_SYS_INIT3(&argc,&argv,&env); 2 3 if (!PL_do_undump) { 4 my_perl = perl_alloc(); 5 if (!my_perl) 6 exit(1); 7 perl_construct(my_perl); 8 PL_perl_destruct_level = 0; 9 } Line 1 is a macro, and its definition is dependent on your operating system. Line 3 references C<PL_do_undump>, a global variable - all global variables in Perl start with C<PL_>. This tells you whether the current running program was created with the C<-u> flag to perl and then F<undump>, which means it's going to be false in any sane context. Line 4 calls a function in F<perl.c> to allocate memory for a Perl interpreter. It's quite a simple function, and the guts of it looks like this: my_perl = (PerlInterpreter*)PerlMem_malloc(sizeof(PerlInterpreter)); Here you see an example of Perl's system abstraction, which we'll see later: C<PerlMem_malloc> is either your system's C<malloc>, or Perl's own C<malloc> as defined in F<malloc.c> if you selected that option at configure time. Next, in line 7, we construct the interpreter using perl_construct, also in F<perl.c>; this sets up all the special variables that Perl needs, the stacks, and so on. Now we pass Perl the command line options, and tell it to go: if (!perl_parse(my_perl, xs_init, argc, argv, (char **)NULL)) perl_run(my_perl); exitstatus = perl_destruct(my_perl); perl_free(my_perl); C<perl_parse> is actually a wrapper around C<S_parse_body>, as defined in F<perl.c>, which processes the command line options, sets up any statically linked XS modules, opens the program and calls C<yyparse> to parse it. =head2 Parsing The aim of this stage is to take the Perl source, and turn it into an op tree. We'll see what one of those looks like later. Strictly speaking, there's three things going on here. C<yyparse>, the parser, lives in F<perly.c>, although you're better off reading the original YACC input in F<perly.y>. (Yes, Virginia, there B<is> a YACC grammar for Perl!) The job of the parser is to take your code and "understand" it, splitting it into sentences, deciding which operands go with which operators and so on. The parser is nobly assisted by the lexer, which chunks up your input into tokens, and decides what type of thing each token is: a variable name, an operator, a bareword, a subroutine, a core function, and so on. The main point of entry to the lexer is C<yylex>, and that and its associated routines can be found in F<toke.c>. Perl isn't much like other computer languages; it's highly context sensitive at times, it can be tricky to work out what sort of token something is, or where a token ends. As such, there's a lot of interplay between the tokeniser and the parser, which can get pretty frightening if you're not used to it. As the parser understands a Perl program, it builds up a tree of operations for the interpreter to perform during execution. The routines which construct and link together the various operations are to be found in F<op.c>, and will be examined later. =head2 Optimization Now the parsing stage is complete, and the finished tree represents the operations that the Perl interpreter needs to perform to execute our program. Next, Perl does a dry run over the tree looking for optimisations: constant expressions such as C<3 + 4> will be computed now, and the optimizer will also see if any multiple operations can be replaced with a single one. For instance, to fetch the variable C<$foo>, instead of grabbing the glob C<*foo> and looking at the scalar component, the optimizer fiddles the op tree to use a function which directly looks up the scalar in question. The main optimizer is C<peep> in F<op.c>, and many ops have their own optimizing functions. =head2 Running Now we're finally ready to go: we have compiled Perl byte code, and all that's left to do is run it. The actual execution is done by the C<runops_standard> function in F<run.c>; more specifically, it's done by these three innocent looking lines: while ((PL_op = PL_op->op_ppaddr(aTHX))) { PERL_ASYNC_CHECK(); } You may be more comfortable with the Perl version of that: PERL_ASYNC_CHECK() while $Perl::op = &{$Perl::op->{function}}; Well, maybe not. Anyway, each op contains a function pointer, which stipulates the function which will actually carry out the operation. This function will return the next op in the sequence - this allows for things like C<if> which choose the next op dynamically at run time. The C<PERL_ASYNC_CHECK> makes sure that things like signals interrupt execution if required. The actual functions called are known as PP code, and they're spread between four files: F<pp_hot.c> contains the "hot" code, which is most often used and highly optimized, F<pp_sys.c> contains all the system-specific functions, F<pp_ctl.c> contains the functions which implement control structures (C<if>, C<while> and the like) and F<pp.c> contains everything else. These are, if you like, the C code for Perl's built-in functions and operators. Note that each C<pp_> function is expected to return a pointer to the next op. Calls to perl subs (and eval blocks) are handled within the same runops loop, and do not consume extra space on the C stack. For example, C<pp_entersub> and C<pp_entertry> just push a C<CxSUB> or C<CxEVAL> block struct onto the context stack which contain the address of the op following the sub call or eval. They then return the first op of that sub or eval block, and so execution continues of that sub or block. Later, a C<pp_leavesub> or C<pp_leavetry> op pops the C<CxSUB> or C<CxEVAL>, retrieves the return op from it, and returns it. =head2 Exception handing Perl's exception handing (i.e. C<die> etc.) is built on top of the low-level C<setjmp()>/C<longjmp()> C-library functions. These basically provide a way to capture the current PC and SP registers and later restore them; i.e. a C<longjmp()> continues at the point in code where a previous C<setjmp()> was done, with anything further up on the C stack being lost. This is why code should always save values using C<SAVE_FOO> rather than in auto variables. The perl core wraps C<setjmp()> etc in the macros C<JMPENV_PUSH> and C<JMPENV_JUMP>. The basic rule of perl exceptions is that C<exit>, and C<die> (in the absence of C<eval>) perform a C<JMPENV_JUMP(2)>, while C<die> within C<eval> does a C<JMPENV_JUMP(3)>. At entry points to perl, such as C<perl_parse()>, C<perl_run()> and C<call_sv(cv, G_EVAL)> each does a C<JMPENV_PUSH>, then enter a runops loop or whatever, and handle possible exception returns. For a 2 return, final cleanup is performed, such as popping stacks and calling C<CHECK> or C<END> blocks. Amongst other things, this is how scope cleanup still occurs during an C<exit>. If a C<die> can find a C<CxEVAL> block on the context stack, then the stack is popped to that level and the return op in that block is assigned to C<PL_restartop>; then a C<JMPENV_JUMP(3)> is performed. This normally passes control back to the guard. In the case of C<perl_run> and C<call_sv>, a non-null C<PL_restartop> triggers re-entry to the runops loop. The is the normal way that C<die> or C<croak> is handled within an C<eval>. Sometimes ops are executed within an inner runops loop, such as tie, sort or overload code. In this case, something like sub FETCH { eval { die } } would cause a longjmp right back to the guard in C<perl_run>, popping both runops loops, which is clearly incorrect. One way to avoid this is for the tie code to do a C<JMPENV_PUSH> before executing C<FETCH> in the inner runops loop, but for efficiency reasons, perl in fact just sets a flag, using C<CATCH_SET(TRUE)>. The C<pp_require>, C<pp_entereval> and C<pp_entertry> ops check this flag, and if true, they call C<docatch>, which does a C<JMPENV_PUSH> and starts a new runops level to execute the code, rather than doing it on the current loop. As a further optimisation, on exit from the eval block in the C<FETCH>, execution of the code following the block is still carried on in the inner loop. When an exception is raised, C<docatch> compares the C<JMPENV> level of the C<CxEVAL> with C<PL_top_env> and if they differ, just re-throws the exception. In this way any inner loops get popped. Here's an example. 1: eval { tie @a, 'A' }; 2: sub A::TIEARRAY { 3: eval { die }; 4: die; 5: } To run this code, C<perl_run> is called, which does a C<JMPENV_PUSH> then enters a runops loop. This loop executes the eval and tie ops on line 1, with the eval pushing a C<CxEVAL> onto the context stack. The C<pp_tie> does a C<CATCH_SET(TRUE)>, then starts a second runops loop to execute the body of C<TIEARRAY>. When it executes the entertry op on line 3, C<CATCH_GET> is true, so C<pp_entertry> calls C<docatch> which does a C<JMPENV_PUSH> and starts a third runops loop, which then executes the die op. At this point the C call stack looks like this: Perl_pp_die Perl_runops # third loop S_docatch_body S_docatch Perl_pp_entertry Perl_runops # second loop S_call_body Perl_call_sv Perl_pp_tie Perl_runops # first loop S_run_body perl_run main and the context and data stacks, as shown by C<-Dstv>, look like: STACK 0: MAIN CX 0: BLOCK => CX 1: EVAL => AV() PV("A"\0) retop=leave STACK 1: MAGIC CX 0: SUB => retop=(null) CX 1: EVAL => * retop=nextstate The die pops the first C<CxEVAL> off the context stack, sets C<PL_restartop> from it, does a C<JMPENV_JUMP(3)>, and control returns to the top C<docatch>. This then starts another third-level runops level, which executes the nextstate, pushmark and die ops on line 4. At the point that the second C<pp_die> is called, the C call stack looks exactly like that above, even though we are no longer within an inner eval; this is because of the optimization mentioned earlier. However, the context stack now looks like this, ie with the top CxEVAL popped: STACK 0: MAIN CX 0: BLOCK => CX 1: EVAL => AV() PV("A"\0) retop=leave STACK 1: MAGIC CX 0: SUB => retop=(null) The die on line 4 pops the context stack back down to the CxEVAL, leaving it as: STACK 0: MAIN CX 0: BLOCK => As usual, C<PL_restartop> is extracted from the C<CxEVAL>, and a C<JMPENV_JUMP(3)> done, which pops the C stack back to the docatch: S_docatch Perl_pp_entertry Perl_runops # second loop S_call_body Perl_call_sv Perl_pp_tie Perl_runops # first loop S_run_body perl_run main In this case, because the C<JMPENV> level recorded in the C<CxEVAL> differs from the current one, C<docatch> just does a C<JMPENV_JUMP(3)> and the C stack unwinds to: perl_run main Because C<PL_restartop> is non-null, C<run_body> starts a new runops loop and execution continues. =head2 INTERNAL VARIABLE TYPES You should by now have had a look at L<perlguts>, which tells you about Perl's internal variable types: SVs, HVs, AVs and the rest. If not, do that now. These variables are used not only to represent Perl-space variables, but also any constants in the code, as well as some structures completely internal to Perl. The symbol table, for instance, is an ordinary Perl hash. Your code is represented by an SV as it's read into the parser; any program files you call are opened via ordinary Perl filehandles, and so on. The core L<Devel::Peek|Devel::Peek> module lets us examine SVs from a Perl program. Let's see, for instance, how Perl treats the constant C<"hello">. % perl -MDevel::Peek -e 'Dump("hello")' 1 SV = PV(0xa041450) at 0xa04ecbc 2 REFCNT = 1 3 FLAGS = (POK,READONLY,pPOK) 4 PV = 0xa0484e0 "hello"\0 5 CUR = 5 6 LEN = 6 Reading C<Devel::Peek> output takes a bit of practise, so let's go through it line by line. Line 1 tells us we're looking at an SV which lives at C<0xa04ecbc> in memory. SVs themselves are very simple structures, but they contain a pointer to a more complex structure. In this case, it's a PV, a structure which holds a string value, at location C<0xa041450>. Line 2 is the reference count; there are no other references to this data, so it's 1. Line 3 are the flags for this SV - it's OK to use it as a PV, it's a read-only SV (because it's a constant) and the data is a PV internally. Next we've got the contents of the string, starting at location C<0xa0484e0>. Line 5 gives us the current length of the string - note that this does B<not> include the null terminator. Line 6 is not the length of the string, but the length of the currently allocated buffer; as the string grows, Perl automatically extends the available storage via a routine called C<SvGROW>. You can get at any of these quantities from C very easily; just add C<Sv> to the name of the field shown in the snippet, and you've got a macro which will return the value: C<SvCUR(sv)> returns the current length of the string, C<SvREFCOUNT(sv)> returns the reference count, C<SvPV(sv, len)> returns the string itself with its length, and so on. More macros to manipulate these properties can be found in L<perlguts>. Let's take an example of manipulating a PV, from C<sv_catpvn>, in F<sv.c> 1 void 2 Perl_sv_catpvn(pTHX_ SV *sv, const char *ptr, STRLEN len) 3 { 4 STRLEN tlen; 5 char *junk; 6 junk = SvPV_force(sv, tlen); 7 SvGROW(sv, tlen + len + 1); 8 if (ptr == junk) 9 ptr = SvPVX(sv); 10 Move(ptr,SvPVX(sv)+tlen,len,char); 11 SvCUR(sv) += len; 12 *SvEND(sv) = '\0'; 13 (void)SvPOK_only_UTF8(sv); /* validate pointer */ 14 SvTAINT(sv); 15 } This is a function which adds a string, C<ptr>, of length C<len> onto the end of the PV stored in C<sv>. The first thing we do in line 6 is make sure that the SV B<has> a valid PV, by calling the C<SvPV_force> macro to force a PV. As a side effect, C<tlen> gets set to the current value of the PV, and the PV itself is returned to C<junk>. In line 7, we make sure that the SV will have enough room to accommodate the old string, the new string and the null terminator. If C<LEN> isn't big enough, C<SvGROW> will reallocate space for us. Now, if C<junk> is the same as the string we're trying to add, we can grab the string directly from the SV; C<SvPVX> is the address of the PV in the SV. Line 10 does the actual catenation: the C<Move> macro moves a chunk of memory around: we move the string C<ptr> to the end of the PV - that's the start of the PV plus its current length. We're moving C<len> bytes of type C<char>. After doing so, we need to tell Perl we've extended the string, by altering C<CUR> to reflect the new length. C<SvEND> is a macro which gives us the end of the string, so that needs to be a C<"\0">. Line 13 manipulates the flags; since we've changed the PV, any IV or NV values will no longer be valid: if we have C<$a=10; $a.="6";> we don't want to use the old IV of 10. C<SvPOK_only_utf8> is a special UTF-8-aware version of C<SvPOK_only>, a macro which turns off the IOK and NOK flags and turns on POK. The final C<SvTAINT> is a macro which launders tainted data if taint mode is turned on. AVs and HVs are more complicated, but SVs are by far the most common variable type being thrown around. Having seen something of how we manipulate these, let's go on and look at how the op tree is constructed. =head1 OP TREES First, what is the op tree, anyway? The op tree is the parsed representation of your program, as we saw in our section on parsing, and it's the sequence of operations that Perl goes through to execute your program, as we saw in L</Running>. An op is a fundamental operation that Perl can perform: all the built-in functions and operators are ops, and there are a series of ops which deal with concepts the interpreter needs internally - entering and leaving a block, ending a statement, fetching a variable, and so on. The op tree is connected in two ways: you can imagine that there are two "routes" through it, two orders in which you can traverse the tree. First, parse order reflects how the parser understood the code, and secondly, execution order tells perl what order to perform the operations in. The easiest way to examine the op tree is to stop Perl after it has finished parsing, and get it to dump out the tree. This is exactly what the compiler backends L<B::Terse|B::Terse>, L<B::Concise|B::Concise> and CPAN module <B::Debug do. Let's have a look at how Perl sees C<$a = $b + $c>: % perl -MO=Terse -e '$a=$b+$c' 1 LISTOP (0x8179888) leave 2 OP (0x81798b0) enter 3 COP (0x8179850) nextstate 4 BINOP (0x8179828) sassign 5 BINOP (0x8179800) add [1] 6 UNOP (0x81796e0) null [15] 7 SVOP (0x80fafe0) gvsv GV (0x80fa4cc) *b 8 UNOP (0x81797e0) null [15] 9 SVOP (0x8179700) gvsv GV (0x80efeb0) *c 10 UNOP (0x816b4f0) null [15] 11 SVOP (0x816dcf0) gvsv GV (0x80fa460) *a Let's start in the middle, at line 4. This is a BINOP, a binary operator, which is at location C<0x8179828>. The specific operator in question is C<sassign> - scalar assignment - and you can find the code which implements it in the function C<pp_sassign> in F<pp_hot.c>. As a binary operator, it has two children: the add operator, providing the result of C<$b+$c>, is uppermost on line 5, and the left hand side is on line 10. Line 10 is the null op: this does exactly nothing. What is that doing there? If you see the null op, it's a sign that something has been optimized away after parsing. As we mentioned in L</Optimization>, the optimization stage sometimes converts two operations into one, for example when fetching a scalar variable. When this happens, instead of rewriting the op tree and cleaning up the dangling pointers, it's easier just to replace the redundant operation with the null op. Originally, the tree would have looked like this: 10 SVOP (0x816b4f0) rv2sv [15] 11 SVOP (0x816dcf0) gv GV (0x80fa460) *a That is, fetch the C<a> entry from the main symbol table, and then look at the scalar component of it: C<gvsv> (C<pp_gvsv> in F<pp_hot.c>) happens to do both these things. The right hand side, starting at line 5 is similar to what we've just seen: we have the C<add> op (C<pp_add>, also in F<pp_hot.c>) add together two C<gvsv>s. Now, what's this about? 1 LISTOP (0x8179888) leave 2 OP (0x81798b0) enter 3 COP (0x8179850) nextstate C<enter> and C<leave> are scoping ops, and their job is to perform any housekeeping every time you enter and leave a block: lexical variables are tidied up, unreferenced variables are destroyed, and so on. Every program will have those first three lines: C<leave> is a list, and its children are all the statements in the block. Statements are delimited by C<nextstate>, so a block is a collection of C<nextstate> ops, with the ops to be performed for each statement being the children of C<nextstate>. C<enter> is a single op which functions as a marker. That's how Perl parsed the program, from top to bottom: Program | Statement | = / \ / \ $a + / \ $b $c However, it's impossible to B<perform> the operations in this order: you have to find the values of C<$b> and C<$c> before you add them together, for instance. So, the other thread that runs through the op tree is the execution order: each op has a field C<op_next> which points to the next op to be run, so following these pointers tells us how perl executes the code. We can traverse the tree in this order using the C<exec> option to C<B::Terse>: % perl -MO=Terse,exec -e '$a=$b+$c' 1 OP (0x8179928) enter 2 COP (0x81798c8) nextstate 3 SVOP (0x81796c8) gvsv GV (0x80fa4d4) *b 4 SVOP (0x8179798) gvsv GV (0x80efeb0) *c 5 BINOP (0x8179878) add [1] 6 SVOP (0x816dd38) gvsv GV (0x80fa468) *a 7 BINOP (0x81798a0) sassign 8 LISTOP (0x8179900) leave This probably makes more sense for a human: enter a block, start a statement. Get the values of C<$b> and C<$c>, and add them together. Find C<$a>, and assign one to the other. Then leave. The way Perl builds up these op trees in the parsing process can be unravelled by examining F<toke.c>, the lexer, and F<perly.y>, the YACC grammar. Let's look at the code that constructs the tree for C<$a = $b + $c>. First, we'll look at the C<Perl_yylex> function in the lexer. We want to look for C<case 'x'>, where x is the first character of the operator. (Incidentally, when looking for the code that handles a keyword, you'll want to search for C<KEY_foo> where "foo" is the keyword.) Here is the code that handles assignment (there are quite a few operators beginning with C<=>, so most of it is omitted for brevity): 1 case '=': 2 s++; ... code that handles == => etc. and pod ... 3 pl_yylval.ival = 0; 4 OPERATOR(ASSIGNOP); We can see on line 4 that our token type is C<ASSIGNOP> (C<OPERATOR> is a macro, defined in F<toke.c>, that returns the token type, among other things). And C<+>: 1 case '+': 2 { 3 const char tmp = *s++; ... code for ++ ... 4 if (PL_expect == XOPERATOR) { ... 5 Aop(OP_ADD); 6 } ... 7 } Line 4 checks what type of token we are expecting. C<Aop> returns a token. If you search for C<Aop> elsewhere in F<toke.c>, you will see that it returns an C<ADDOP> token. Now that we know the two token types we want to look for in the parser, let's take the piece of F<perly.y> we need to construct the tree for C<$a = $b + $c> 1 term : term ASSIGNOP term 2 { $$ = newASSIGNOP(OPf_STACKED, $1, $2, $3); } 3 | term ADDOP term 4 { $$ = newBINOP($2, 0, scalar($1), scalar($3)); } If you're not used to reading BNF grammars, this is how it works: You're fed certain things by the tokeniser, which generally end up in upper case. C<ADDOP> and C<ASSIGNOP> are examples of "terminal symbols", because you can't get any simpler than them. The grammar, lines one and three of the snippet above, tells you how to build up more complex forms. These complex forms, "non-terminal symbols" are generally placed in lower case. C<term> here is a non-terminal symbol, representing a single expression. The grammar gives you the following rule: you can make the thing on the left of the colon if you see all the things on the right in sequence. This is called a "reduction", and the aim of parsing is to completely reduce the input. There are several different ways you can perform a reduction, separated by vertical bars: so, C<term> followed by C<=> followed by C<term> makes a C<term>, and C<term> followed by C<+> followed by C<term> can also make a C<term>. So, if you see two terms with an C<=> or C<+>, between them, you can turn them into a single expression. When you do this, you execute the code in the block on the next line: if you see C<=>, you'll do the code in line 2. If you see C<+>, you'll do the code in line 4. It's this code which contributes to the op tree. | term ADDOP term { $$ = newBINOP($2, 0, scalar($1), scalar($3)); } What this does is creates a new binary op, and feeds it a number of variables. The variables refer to the tokens: C<$1> is the first token in the input, C<$2> the second, and so on - think regular expression backreferences. C<$$> is the op returned from this reduction. So, we call C<newBINOP> to create a new binary operator. The first parameter to C<newBINOP>, a function in F<op.c>, is the op type. It's an addition operator, so we want the type to be C<ADDOP>. We could specify this directly, but it's right there as the second token in the input, so we use C<$2>. The second parameter is the op's flags: 0 means "nothing special". Then the things to add: the left and right hand side of our expression, in scalar context. The functions that create ops, which have names like C<newUNOP> and C<newBINOP>, call a "check" function associated with each op type, before returning the op. The check functions can mangle the op as they see fit, and even replace it with an entirely new one. These functions are defined in F<op.c>, and have a C<Perl_ck_> prefix. You can find out which check function is used for a particular op type by looking in F<regen/opcodes>. Take C<OP_ADD>, for example. (C<OP_ADD> is the token value from the C<Aop(OP_ADD)> in F<toke.c> which the parser passes to C<newBINOP> as its first argument.) Here is the relevant line: add addition (+) ck_null IfsT2 S S The check function in this case is C<Perl_ck_null>, which does nothing. Let's look at a more interesting case: readline <HANDLE> ck_readline t% F? And here is the function from F<op.c>: 1 OP * 2 Perl_ck_readline(pTHX_ OP *o) 3 { 4 PERL_ARGS_ASSERT_CK_READLINE; 5 6 if (o->op_flags & OPf_KIDS) { 7 OP *kid = cLISTOPo->op_first; 8 if (kid->op_type == OP_RV2GV) 9 kid->op_private |= OPpALLOW_FAKE; 10 } 11 else { 12 OP * const newop 13 = newUNOP(OP_READLINE, 0, newGVOP(OP_GV, 0, 14 PL_argvgv)); 15 op_free(o); 16 return newop; 17 } 18 return o; 19 } One particularly interesting aspect is that if the op has no kids (i.e., C<readline()> or C<< <> >>) the op is freed and replaced with an entirely new one that references C<*ARGV> (lines 12-16). =head1 STACKS When perl executes something like C<addop>, how does it pass on its results to the next op? The answer is, through the use of stacks. Perl has a number of stacks to store things it's currently working on, and we'll look at the three most important ones here. =head2 Argument stack Arguments are passed to PP code and returned from PP code using the argument stack, C<ST>. The typical way to handle arguments is to pop them off the stack, deal with them how you wish, and then push the result back onto the stack. This is how, for instance, the cosine operator works: NV value; value = POPn; value = Perl_cos(value); XPUSHn(value); We'll see a more tricky example of this when we consider Perl's macros below. C<POPn> gives you the NV (floating point value) of the top SV on the stack: the C<$x> in C<cos($x)>. Then we compute the cosine, and push the result back as an NV. The C<X> in C<XPUSHn> means that the stack should be extended if necessary - it can't be necessary here, because we know there's room for one more item on the stack, since we've just removed one! The C<XPUSH*> macros at least guarantee safety. Alternatively, you can fiddle with the stack directly: C<SP> gives you the first element in your portion of the stack, and C<TOP*> gives you the top SV/IV/NV/etc. on the stack. So, for instance, to do unary negation of an integer: SETi(-TOPi); Just set the integer value of the top stack entry to its negation. Argument stack manipulation in the core is exactly the same as it is in XSUBs - see L<perlxstut>, L<perlxs> and L<perlguts> for a longer description of the macros used in stack manipulation. =head2 Mark stack I say "your portion of the stack" above because PP code doesn't necessarily get the whole stack to itself: if your function calls another function, you'll only want to expose the arguments aimed for the called function, and not (necessarily) let it get at your own data. The way we do this is to have a "virtual" bottom-of-stack, exposed to each function. The mark stack keeps bookmarks to locations in the argument stack usable by each function. For instance, when dealing with a tied variable, (internally, something with "P" magic) Perl has to call methods for accesses to the tied variables. However, we need to separate the arguments exposed to the method to the argument exposed to the original function - the store or fetch or whatever it may be. Here's roughly how the tied C<push> is implemented; see C<av_push> in F<av.c>: 1 PUSHMARK(SP); 2 EXTEND(SP,2); 3 PUSHs(SvTIED_obj((SV*)av, mg)); 4 PUSHs(val); 5 PUTBACK; 6 ENTER; 7 call_method("PUSH", G_SCALAR|G_DISCARD); 8 LEAVE; Let's examine the whole implementation, for practice: 1 PUSHMARK(SP); Push the current state of the stack pointer onto the mark stack. This is so that when we've finished adding items to the argument stack, Perl knows how many things we've added recently. 2 EXTEND(SP,2); 3 PUSHs(SvTIED_obj((SV*)av, mg)); 4 PUSHs(val); We're going to add two more items onto the argument stack: when you have a tied array, the C<PUSH> subroutine receives the object and the value to be pushed, and that's exactly what we have here - the tied object, retrieved with C<SvTIED_obj>, and the value, the SV C<val>. 5 PUTBACK; Next we tell Perl to update the global stack pointer from our internal variable: C<dSP> only gave us a local copy, not a reference to the global. 6 ENTER; 7 call_method("PUSH", G_SCALAR|G_DISCARD); 8 LEAVE; C<ENTER> and C<LEAVE> localise a block of code - they make sure that all variables are tidied up, everything that has been localised gets its previous value returned, and so on. Think of them as the C<{> and C<}> of a Perl block. To actually do the magic method call, we have to call a subroutine in Perl space: C<call_method> takes care of that, and it's described in L<perlcall>. We call the C<PUSH> method in scalar context, and we're going to discard its return value. The call_method() function removes the top element of the mark stack, so there is nothing for the caller to clean up. =head2 Save stack C doesn't have a concept of local scope, so perl provides one. We've seen that C<ENTER> and C<LEAVE> are used as scoping braces; the save stack implements the C equivalent of, for example: { local $foo = 42; ... } See L<perlguts/"Localizing changes"> for how to use the save stack. =head1 MILLIONS OF MACROS One thing you'll notice about the Perl source is that it's full of macros. Some have called the pervasive use of macros the hardest thing to understand, others find it adds to clarity. Let's take an example, a stripped-down version the code which implements the addition operator: 1 PP(pp_add) 2 { 3 dSP; dATARGET; 4 tryAMAGICbin_MG(add_amg, AMGf_assign|AMGf_numeric); 5 { 6 dPOPTOPnnrl_ul; 7 SETn( left + right ); 8 RETURN; 9 } 10 } Every line here (apart from the braces, of course) contains a macro. The first line sets up the function declaration as Perl expects for PP code; line 3 sets up variable declarations for the argument stack and the target, the return value of the operation. Line 4 tries to see if the addition operation is overloaded; if so, the appropriate subroutine is called. Line 6 is another variable declaration - all variable declarations start with C<d> - which pops from the top of the argument stack two NVs (hence C<nn>) and puts them into the variables C<right> and C<left>, hence the C<rl>. These are the two operands to the addition operator. Next, we call C<SETn> to set the NV of the return value to the result of adding the two values. This done, we return - the C<RETURN> macro makes sure that our return value is properly handled, and we pass the next operator to run back to the main run loop. Most of these macros are explained in L<perlapi>, and some of the more important ones are explained in L<perlxs> as well. Pay special attention to L<perlguts/Background and PERL_IMPLICIT_CONTEXT> for information on the C<[pad]THX_?> macros. =head1 FURTHER READING For more information on the Perl internals, please see the documents listed at L<perl/Internals and C Language Interface>. perlopentut.pod 0000644 00000035567 15125556335 0007663 0 ustar 00 =encoding utf8 =head1 NAME perlopentut - simple recipes for opening files and pipes in Perl =head1 DESCRIPTION Whenever you do I/O on a file in Perl, you do so through what in Perl is called a B<filehandle>. A filehandle is an internal name for an external file. It is the job of the C<open> function to make the association between the internal name and the external name, and it is the job of the C<close> function to break that association. For your convenience, Perl sets up a few special filehandles that are already open when you run. These include C<STDIN>, C<STDOUT>, C<STDERR>, and C<ARGV>. Since those are pre-opened, you can use them right away without having to go to the trouble of opening them yourself: print STDERR "This is a debugging message.\n"; print STDOUT "Please enter something: "; $response = <STDIN> // die "how come no input?"; print STDOUT "Thank you!\n"; while (<ARGV>) { ... } As you see from those examples, C<STDOUT> and C<STDERR> are output handles, and C<STDIN> and C<ARGV> are input handles. They are in all capital letters because they are reserved to Perl, much like the C<@ARGV> array and the C<%ENV> hash are. Their external associations were set up by your shell. You will need to open every other filehandle on your own. Although there are many variants, the most common way to call Perl's open() function is with three arguments and one return value: C< I<OK> = open(I<HANDLE>, I<MODE>, I<PATHNAME>)> Where: =over =item I<OK> will be some defined value if the open succeeds, but C<undef> if it fails; =item I<HANDLE> should be an undefined scalar variable to be filled in by the C<open> function if it succeeds; =item I<MODE> is the access mode and the encoding format to open the file with; =item I<PATHNAME> is the external name of the file you want opened. =back Most of the complexity of the C<open> function lies in the many possible values that the I<MODE> parameter can take on. One last thing before we show you how to open files: opening files does not (usually) automatically lock them in Perl. See L<perlfaq5> for how to lock. =head1 Opening Text Files =head2 Opening Text Files for Reading If you want to read from a text file, first open it in read-only mode like this: my $filename = "/some/path/to/a/textfile/goes/here"; my $encoding = ":encoding(UTF-8)"; my $handle = undef; # this will be filled in on success open($handle, "< $encoding", $filename) || die "$0: can't open $filename for reading: $!"; As with the shell, in Perl the C<< "<" >> is used to open the file in read-only mode. If it succeeds, Perl allocates a brand new filehandle for you and fills in your previously undefined C<$handle> argument with a reference to that handle. Now you may use functions like C<readline>, C<read>, C<getc>, and C<sysread> on that handle. Probably the most common input function is the one that looks like an operator: $line = readline($handle); $line = <$handle>; # same thing Because the C<readline> function returns C<undef> at end of file or upon error, you will sometimes see it used this way: $line = <$handle>; if (defined $line) { # do something with $line } else { # $line is not valid, so skip it } You can also just quickly C<die> on an undefined value this way: $line = <$handle> // die "no input found"; However, if hitting EOF is an expected and normal event, you do not want to exit simply because you have run out of input. Instead, you probably just want to exit an input loop. You can then test to see if an actual error has caused the loop to terminate, and act accordingly: while (<$handle>) { # do something with data in $_ } if ($!) { die "unexpected error while reading from $filename: $!"; } B<A Note on Encodings>: Having to specify the text encoding every time might seem a bit of a bother. To set up a default encoding for C<open> so that you don't have to supply it each time, you can use the C<open> pragma: use open qw< :encoding(UTF-8) >; Once you've done that, you can safely omit the encoding part of the open mode: open($handle, "<", $filename) || die "$0: can't open $filename for reading: $!"; But never use the bare C<< "<" >> without having set up a default encoding first. Otherwise, Perl cannot know which of the many, many, many possible flavors of text file you have, and Perl will have no idea how to correctly map the data in your file into actual characters it can work with. Other common encoding formats including C<"ASCII">, C<"ISO-8859-1">, C<"ISO-8859-15">, C<"Windows-1252">, C<"MacRoman">, and even C<"UTF-16LE">. See L<perlunitut> for more about encodings. =head2 Opening Text Files for Writing When you want to write to a file, you first have to decide what to do about any existing contents of that file. You have two basic choices here: to preserve or to clobber. If you want to preserve any existing contents, then you want to open the file in append mode. As in the shell, in Perl you use C<<< ">>" >>> to open an existing file in append mode. C<<< ">>" >>> creates the file if it does not already exist. my $handle = undef; my $filename = "/some/path/to/a/textfile/goes/here"; my $encoding = ":encoding(UTF-8)"; open($handle, ">> $encoding", $filename) || die "$0: can't open $filename for appending: $!"; Now you can write to that filehandle using any of C<print>, C<printf>, C<say>, C<write>, or C<syswrite>. As noted above, if the file does not already exist, then the append-mode open will create it for you. But if the file does already exist, its contents are safe from harm because you will be adding your new text past the end of the old text. On the other hand, sometimes you want to clobber whatever might already be there. To empty out a file before you start writing to it, you can open it in write-only mode: my $handle = undef; my $filename = "/some/path/to/a/textfile/goes/here"; my $encoding = ":encoding(UTF-8)"; open($handle, "> $encoding", $filename) || die "$0: can't open $filename in write-open mode: $!"; Here again Perl works just like the shell in that the C<< ">" >> clobbers an existing file. As with the append mode, when you open a file in write-only mode, you can now write to that filehandle using any of C<print>, C<printf>, C<say>, C<write>, or C<syswrite>. What about read-write mode? You should probably pretend it doesn't exist, because opening text files in read-write mode is unlikely to do what you would like. See L<perlfaq5> for details. =head1 Opening Binary Files If the file to be opened contains binary data instead of text characters, then the C<MODE> argument to C<open> is a little different. Instead of specifying the encoding, you tell Perl that your data are in raw bytes. my $filename = "/some/path/to/a/binary/file/goes/here"; my $encoding = ":raw :bytes" my $handle = undef; # this will be filled in on success And then open as before, choosing C<<< "<" >>>, C<<< ">>" >>>, or C<<< ">" >>> as needed: open($handle, "< $encoding", $filename) || die "$0: can't open $filename for reading: $!"; open($handle, ">> $encoding", $filename) || die "$0: can't open $filename for appending: $!"; open($handle, "> $encoding", $filename) || die "$0: can't open $filename in write-open mode: $!"; Alternately, you can change to binary mode on an existing handle this way: binmode($handle) || die "cannot binmode handle"; This is especially handy for the handles that Perl has already opened for you. binmode(STDIN) || die "cannot binmode STDIN"; binmode(STDOUT) || die "cannot binmode STDOUT"; You can also pass C<binmode> an explicit encoding to change it on the fly. This isn't exactly "binary" mode, but we still use C<binmode> to do it: binmode(STDIN, ":encoding(MacRoman)") || die "cannot binmode STDIN"; binmode(STDOUT, ":encoding(UTF-8)") || die "cannot binmode STDOUT"; Once you have your binary file properly opened in the right mode, you can use all the same Perl I/O functions as you used on text files. However, you may wish to use the fixed-size C<read> instead of the variable-sized C<readline> for your input. Here's an example of how to copy a binary file: my $BUFSIZ = 64 * (2 ** 10); my $name_in = "/some/input/file"; my $name_out = "/some/output/flie"; my($in_fh, $out_fh, $buffer); open($in_fh, "<", $name_in) || die "$0: cannot open $name_in for reading: $!"; open($out_fh, ">", $name_out) || die "$0: cannot open $name_out for writing: $!"; for my $fh ($in_fh, $out_fh) { binmode($fh) || die "binmode failed"; } while (read($in_fh, $buffer, $BUFSIZ)) { unless (print $out_fh $buffer) { die "couldn't write to $name_out: $!"; } } close($in_fh) || die "couldn't close $name_in: $!"; close($out_fh) || die "couldn't close $name_out: $!"; =head1 Opening Pipes Perl also lets you open a filehandle into an external program or shell command rather than into a file. You can do this in order to pass data from your Perl program to an external command for further processing, or to receive data from another program for your own Perl program to process. Filehandles into commands are also known as I<pipes>, since they work on similar inter-process communication principles as Unix pipelines. Such a filehandle has an active program instead of a static file on its external end, but in every other sense it works just like a more typical file-based filehandle, with all the techniques discussed earlier in this article just as applicable. As such, you open a pipe using the same C<open> call that you use for opening files, setting the second (C<MODE>) argument to special characters that indicate either an input or an output pipe. Use C<"-|"> for a filehandle that will let your Perl program read data from an external program, and C<"|-"> for a filehandle that will send data to that program instead. =head2 Opening a pipe for reading Let's say you'd like your Perl program to process data stored in a nearby directory called C<unsorted>, which contains a number of textfiles. You'd also like your program to sort all the contents from these files into a single, alphabetically sorted list of unique lines before it starts processing them. You could do this through opening an ordinary filehandle into each of those files, gradually building up an in-memory array of all the file contents you load this way, and finally sorting and filtering that array when you've run out of files to load. I<Or>, you could offload all that merging and sorting into your operating system's own C<sort> command by opening a pipe directly into its output, and get to work that much faster. Here's how that might look: open(my $sort_fh, '-|', 'sort -u unsorted/*.txt') or die "Couldn't open a pipe into sort: $!"; # And right away, we can start reading sorted lines: while (my $line = <$sort_fh>) { # # ... Do something interesting with each $line here ... # } The second argument to C<open>, C<"-|">, makes it a read-pipe into a separate program, rather than an ordinary filehandle into a file. Note that the third argument to C<open> is a string containing the program name (C<sort>) plus all its arguments: in this case, C<-u> to specify unqiue sort, and then a fileglob specifying the files to sort. The resulting filehandle C<$sort_fh> works just like a read-only (C<< "<" >>) filehandle, and your program can subsequently read data from it as if it were opened onto an ordinary, single file. =head2 Opening a pipe for writing Continuing the previous example, let's say that your program has completed its processing, and the results sit in an array called C<@processed>. You want to print these lines to a file called C<numbered.txt> with a neatly formatted column of line-numbers. Certainly you could write your own code to do this — or, once again, you could kick that work over to another program. In this case, C<cat>, running with its own C<-n> option to activate line numbering, should do the trick: open(my $cat_fh, '|-', 'cat -n > numbered.txt') or die "Couldn't open a pipe into cat: $!"; for my $line (@processed) { print $cat_fh $line; } Here, we use a second C<open> argument of C<"|-">, signifying that the filehandle assigned to C<$cat_fh> should be a write-pipe. We can then use it just as we would a write-only ordinary filehandle, including the basic function of C<print>-ing data to it. Note that the third argument, specifying the command that we wish to pipe to, sets up C<cat> to redirect its output via that C<< ">" >> symbol into the file C<numbered.txt>. This can start to look a little tricky, because that same symbol would have meant something entirely different had it showed it in the second argument to C<open>! But here in the third argument, it's simply part of the shell command that Perl will open the pipe into, and Perl itself doesn't invest any special meaning to it. =head2 Expressing the command as a list For opening pipes, Perl offers the option to call C<open> with a list comprising the desired command and all its own arguments as separate elements, rather than combining them into a single string as in the examples above. For instance, we could have phrased the C<open> call in the first example like this: open(my $sort_fh, '-|', 'sort', '-u', glob('unsorted/*.txt')) or die "Couldn't open a pipe into sort: $!"; When you call C<open> this way, Perl invokes the given command directly, bypassing the shell. As such, the shell won't try to interpret any special characters within the command's argument list, which might overwise have unwanted effects. This can make for safer, less error-prone C<open> calls, useful in cases such as passing in variables as arguments, or even just referring to filenames with spaces in them. However, when you I<do> want to pass a meaningful metacharacter to the shell, such with the C<"*"> inside that final C<unsorted/*.txt> argument here, you can't use this alternate syntax. In this case, we have worked around it via Perl's handy C<glob> built-in function, which evaluates its argument into a list of filenames — and we can safely pass that resulting list right into C<open>, as shown above. Note also that representing piped-command arguments in list form like this doesn't work on every platform. It will work on any Unix-based OS that provides a real C<fork> function (e.g. macOS or Linux), as well as on Windows when running Perl 5.22 or later. =head1 SEE ALSO The full documentation for L<C<open>|perlfunc/open FILEHANDLE,MODE,EXPR> provides a thorough reference to this function, beyond the best-practice basics covered here. =head1 AUTHOR and COPYRIGHT Copyright 2013 Tom Christiansen; now maintained by Perl5 Porters This documentation is free; you can redistribute it and/or modify it under the same terms as Perl itself. perlreref.pod 0000644 00000036346 15125556335 0007264 0 ustar 00 =head1 NAME perlreref - Perl Regular Expressions Reference =head1 DESCRIPTION This is a quick reference to Perl's regular expressions. For full information see L<perlre> and L<perlop>, as well as the L</"SEE ALSO"> section in this document. =head2 OPERATORS C<=~> determines to which variable the regex is applied. In its absence, $_ is used. $var =~ /foo/; C<!~> determines to which variable the regex is applied, and negates the result of the match; it returns false if the match succeeds, and true if it fails. $var !~ /foo/; C<m/pattern/msixpogcdualn> searches a string for a pattern match, applying the given options. m Multiline mode - ^ and $ match internal lines s match as a Single line - . matches \n i case-Insensitive x eXtended legibility - free whitespace and comments p Preserve a copy of the matched string - ${^PREMATCH}, ${^MATCH}, ${^POSTMATCH} will be defined. o compile pattern Once g Global - all occurrences c don't reset pos on failed matches when using /g a restrict \d, \s, \w and [:posix:] to match ASCII only aa (two a's) also /i matches exclude ASCII/non-ASCII l match according to current locale u match according to Unicode rules d match according to native rules unless something indicates Unicode n Non-capture mode. Don't let () fill in $1, $2, etc... If 'pattern' is an empty string, the last I<successfully> matched regex is used. Delimiters other than '/' may be used for both this operator and the following ones. The leading C<m> can be omitted if the delimiter is '/'. C<qr/pattern/msixpodualn> lets you store a regex in a variable, or pass one around. Modifiers as for C<m//>, and are stored within the regex. C<s/pattern/replacement/msixpogcedual> substitutes matches of 'pattern' with 'replacement'. Modifiers as for C<m//>, with two additions: e Evaluate 'replacement' as an expression r Return substitution and leave the original string untouched. 'e' may be specified multiple times. 'replacement' is interpreted as a double quoted string unless a single-quote (C<'>) is the delimiter. C<m?pattern?> is like C<m/pattern/> but matches only once. No alternate delimiters can be used. Must be reset with reset(). =head2 SYNTAX \ Escapes the character immediately following it . Matches any single character except a newline (unless /s is used) ^ Matches at the beginning of the string (or line, if /m is used) $ Matches at the end of the string (or line, if /m is used) * Matches the preceding element 0 or more times + Matches the preceding element 1 or more times ? Matches the preceding element 0 or 1 times {...} Specifies a range of occurrences for the element preceding it [...] Matches any one of the characters contained within the brackets (...) Groups subexpressions for capturing to $1, $2... (?:...) Groups subexpressions without capturing (cluster) | Matches either the subexpression preceding or following it \g1 or \g{1}, \g2 ... Matches the text from the Nth group \1, \2, \3 ... Matches the text from the Nth group \g-1 or \g{-1}, \g-2 ... Matches the text from the Nth previous group \g{name} Named backreference \k<name> Named backreference \k'name' Named backreference (?P=name) Named backreference (python syntax) =head2 ESCAPE SEQUENCES These work as in normal strings. \a Alarm (beep) \e Escape \f Formfeed \n Newline \r Carriage return \t Tab \037 Char whose ordinal is the 3 octal digits, max \777 \o{2307} Char whose ordinal is the octal number, unrestricted \x7f Char whose ordinal is the 2 hex digits, max \xFF \x{263a} Char whose ordinal is the hex number, unrestricted \cx Control-x \N{name} A named Unicode character or character sequence \N{U+263D} A Unicode character by hex ordinal \l Lowercase next character \u Titlecase next character \L Lowercase until \E \U Uppercase until \E \F Foldcase until \E \Q Disable pattern metacharacters until \E \E End modification For Titlecase, see L</Titlecase>. This one works differently from normal strings: \b An assertion, not backspace, except in a character class =head2 CHARACTER CLASSES [amy] Match 'a', 'm' or 'y' [f-j] Dash specifies "range" [f-j-] Dash escaped or at start or end means 'dash' [^f-j] Caret indicates "match any character _except_ these" The following sequences (except C<\N>) work within or without a character class. The first six are locale aware, all are Unicode aware. See L<perllocale> and L<perlunicode> for details. \d A digit \D A nondigit \w A word character \W A non-word character \s A whitespace character \S A non-whitespace character \h A horizontal whitespace \H A non horizontal whitespace \N A non newline (when not followed by '{NAME}';; not valid in a character class; equivalent to [^\n]; it's like '.' without /s modifier) \v A vertical whitespace \V A non vertical whitespace \R A generic newline (?>\v|\x0D\x0A) \pP Match P-named (Unicode) property \p{...} Match Unicode property with name longer than 1 character \PP Match non-P \P{...} Match lack of Unicode property with name longer than 1 char \X Match Unicode extended grapheme cluster POSIX character classes and their Unicode and Perl equivalents: ASCII- Full- POSIX range range backslash [[:...:]] \p{...} \p{...} sequence Description ----------------------------------------------------------------------- alnum PosixAlnum XPosixAlnum 'alpha' plus 'digit' alpha PosixAlpha XPosixAlpha Alphabetic characters ascii ASCII Any ASCII character blank PosixBlank XPosixBlank \h Horizontal whitespace; full-range also written as \p{HorizSpace} (GNU extension) cntrl PosixCntrl XPosixCntrl Control characters digit PosixDigit XPosixDigit \d Decimal digits graph PosixGraph XPosixGraph 'alnum' plus 'punct' lower PosixLower XPosixLower Lowercase characters print PosixPrint XPosixPrint 'graph' plus 'space', but not any Controls punct PosixPunct XPosixPunct Punctuation and Symbols in ASCII-range; just punct outside it space PosixSpace XPosixSpace \s Whitespace upper PosixUpper XPosixUpper Uppercase characters word PosixWord XPosixWord \w 'alnum' + Unicode marks + connectors, like '_' (Perl extension) xdigit ASCII_Hex_Digit XPosixDigit Hexadecimal digit, ASCII-range is [0-9A-Fa-f] Also, various synonyms like C<\p{Alpha}> for C<\p{XPosixAlpha}>; all listed in L<perluniprops/Properties accessible through \p{} and \P{}> Within a character class: POSIX traditional Unicode [:digit:] \d \p{Digit} [:^digit:] \D \P{Digit} =head2 ANCHORS All are zero-width assertions. ^ Match string start (or line, if /m is used) $ Match string end (or line, if /m is used) or before newline \b{} Match boundary of type specified within the braces \B{} Match wherever \b{} doesn't match \b Match word boundary (between \w and \W) \B Match except at word boundary (between \w and \w or \W and \W) \A Match string start (regardless of /m) \Z Match string end (before optional newline) \z Match absolute string end \G Match where previous m//g left off \K Keep the stuff left of the \K, don't include it in $& =head2 QUANTIFIERS Quantifiers are greedy by default and match the B<longest> leftmost. Maximal Minimal Possessive Allowed range ------- ------- ---------- ------------- {n,m} {n,m}? {n,m}+ Must occur at least n times but no more than m times {n,} {n,}? {n,}+ Must occur at least n times {n} {n}? {n}+ Must occur exactly n times * *? *+ 0 or more times (same as {0,}) + +? ++ 1 or more times (same as {1,}) ? ?? ?+ 0 or 1 time (same as {0,1}) The possessive forms (new in Perl 5.10) prevent backtracking: what gets matched by a pattern with a possessive quantifier will not be backtracked into, even if that causes the whole match to fail. There is no quantifier C<{,n}>. That's currently illegal. =head2 EXTENDED CONSTRUCTS (?#text) A comment (?:...) Groups subexpressions without capturing (cluster) (?pimsx-imsx:...) Enable/disable option (as per m// modifiers) (?=...) Zero-width positive lookahead assertion (*pla:...) Same, starting in 5.32; experimentally in 5.28 (*positive_lookahead:...) Same, same versions as *pla (?!...) Zero-width negative lookahead assertion (*nla:...) Same, starting in 5.32; experimentally in 5.28 (*negative_lookahead:...) Same, same versions as *nla (?<=...) Zero-width positive lookbehind assertion (*plb:...) Same, starting in 5.32; experimentally in 5.28 (*positive_lookbehind:...) Same, same versions as *plb (?<!...) Zero-width negative lookbehind assertion (*nlb:...) Same, starting in 5.32; experimentally in 5.28 (*negative_lookbehind:...) Same, same versions as *plb (?>...) Grab what we can, prohibit backtracking (*atomic:...) Same, starting in 5.32; experimentally in 5.28 (?|...) Branch reset (?<name>...) Named capture (?'name'...) Named capture (?P<name>...) Named capture (python syntax) (?[...]) Extended bracketed character class (?{ code }) Embedded code, return value becomes $^R (??{ code }) Dynamic regex, return value used as regex (?N) Recurse into subpattern number N (?-N), (?+N) Recurse into Nth previous/next subpattern (?R), (?0) Recurse at the beginning of the whole pattern (?&name) Recurse into a named subpattern (?P>name) Recurse into a named subpattern (python syntax) (?(cond)yes|no) (?(cond)yes) Conditional expression, where "(cond)" can be: (?=pat) lookahead; also (*pla:pat) (*positive_lookahead:pat) (?!pat) negative lookahead; also (*nla:pat) (*negative_lookahead:pat) (?<=pat) lookbehind; also (*plb:pat) (*lookbehind:pat) (?<!pat) negative lookbehind; also (*nlb:pat) (*negative_lookbehind:pat) (N) subpattern N has matched something (<name>) named subpattern has matched something ('name') named subpattern has matched something (?{code}) code condition (R) true if recursing (RN) true if recursing into Nth subpattern (R&name) true if recursing into named subpattern (DEFINE) always false, no no-pattern allowed =head2 VARIABLES $_ Default variable for operators to use $` Everything prior to matched string $& Entire matched string $' Everything after to matched string ${^PREMATCH} Everything prior to matched string ${^MATCH} Entire matched string ${^POSTMATCH} Everything after to matched string Note to those still using Perl 5.18 or earlier: The use of C<$`>, C<$&> or C<$'> will slow down B<all> regex use within your program. Consult L<perlvar> for C<@-> to see equivalent expressions that won't cause slow down. See also L<Devel::SawAmpersand>. Starting with Perl 5.10, you can also use the equivalent variables C<${^PREMATCH}>, C<${^MATCH}> and C<${^POSTMATCH}>, but for them to be defined, you have to specify the C</p> (preserve) modifier on your regular expression. In Perl 5.20, the use of C<$`>, C<$&> and C<$'> makes no speed difference. $1, $2 ... hold the Xth captured expr $+ Last parenthesized pattern match $^N Holds the most recently closed capture $^R Holds the result of the last (?{...}) expr @- Offsets of starts of groups. $-[0] holds start of whole match @+ Offsets of ends of groups. $+[0] holds end of whole match %+ Named capture groups %- Named capture groups, as array refs Captured groups are numbered according to their I<opening> paren. =head2 FUNCTIONS lc Lowercase a string lcfirst Lowercase first char of a string uc Uppercase a string ucfirst Titlecase first char of a string fc Foldcase a string pos Return or set current match position quotemeta Quote metacharacters reset Reset m?pattern? status study Analyze string for optimizing matching split Use a regex to split a string into parts The first five of these are like the escape sequences C<\L>, C<\l>, C<\U>, C<\u>, and C<\F>. For Titlecase, see L</Titlecase>; For Foldcase, see L</Foldcase>. =head2 TERMINOLOGY =head3 Titlecase Unicode concept which most often is equal to uppercase, but for certain characters like the German "sharp s" there is a difference. =head3 Foldcase Unicode form that is useful when comparing strings regardless of case, as certain characters have complex one-to-many case mappings. Primarily a variant of lowercase. =head1 AUTHOR Iain Truskett. Updated by the Perl 5 Porters. This document may be distributed under the same terms as Perl itself. =head1 SEE ALSO =over 4 =item * L<perlretut> for a tutorial on regular expressions. =item * L<perlrequick> for a rapid tutorial. =item * L<perlre> for more details. =item * L<perlvar> for details on the variables. =item * L<perlop> for details on the operators. =item * L<perlfunc> for details on the functions. =item * L<perlfaq6> for FAQs on regular expressions. =item * L<perlrebackslash> for a reference on backslash sequences. =item * L<perlrecharclass> for a reference on character classes. =item * The L<re> module to alter behaviour and aid debugging. =item * L<perldebug/"Debugging Regular Expressions"> =item * L<perluniintro>, L<perlunicode>, L<charnames> and L<perllocale> for details on regexes and internationalisation. =item * I<Mastering Regular Expressions> by Jeffrey Friedl (L<http://oreilly.com/catalog/9780596528126/>) for a thorough grounding and reference on the topic. =back =head1 THANKS David P.C. Wollmann, Richard Soderberg, Sean M. Burke, Tom Christiansen, Jim Cromie, and Jeffrey Goff for useful advice. =cut perlbs2000.pod 0000644 00000017472 15125556335 0007066 0 ustar 00 This document is written in pod format hence there are punctuation characters in odd places. Do not worry, you've apparently got the ASCII->EBCDIC translation worked out correctly. You can read more about pod in pod/perlpod.pod or the short summary in the INSTALL file. =head1 NAME perlbs2000 - building and installing Perl for BS2000. B<This document needs to be updated, but we don't know what it should say. Please submit comments to L<https://github.com/Perl/perl5/issues>.> =head1 SYNOPSIS This document will help you Configure, build, test and install Perl on BS2000 in the POSIX subsystem. =head1 DESCRIPTION This is a ported perl for the POSIX subsystem in BS2000 VERSION OSD V3.1A or later. It may work on other versions, but we started porting and testing it with 3.1A and are currently using Version V4.0A. You may need the following GNU programs in order to install perl: =head2 gzip on BS2000 We used version 1.2.4, which could be installed out of the box with one failure during 'make check'. =head2 bison on BS2000 The yacc coming with BS2000 POSIX didn't work for us. So we had to use bison. We had to make a few changes to perl in order to use the pure (reentrant) parser of bison. We used version 1.25, but we had to add a few changes due to EBCDIC. See below for more details concerning yacc. =head2 Unpacking Perl Distribution on BS2000 To extract an ASCII tar archive on BS2000 POSIX you need an ASCII filesystem (we used the mountpoint /usr/local/ascii for this). Now you extract the archive in the ASCII filesystem without I/O-conversion: cd /usr/local/ascii export IO_CONVERSION=NO gunzip < /usr/local/src/perl.tar.gz | pax -r You may ignore the error message for the first element of the archive (this doesn't look like a tar archive / skipping to next file...), it's only the directory which will be created automatically anyway. After extracting the archive you copy the whole directory tree to your EBCDIC filesystem. B<This time you use I/O-conversion>: cd /usr/local/src IO_CONVERSION=YES cp -r /usr/local/ascii/perl5.005_02 ./ =head2 Compiling Perl on BS2000 There is a "hints" file for BS2000 called hints.posix-bc (because posix-bc is the OS name given by `uname`) that specifies the correct values for most things. The major problem is (of course) the EBCDIC character set. We have german EBCDIC version. Because of our problems with the native yacc we used GNU bison to generate a pure (=reentrant) parser for perly.y. So our yacc is really the following script: -----8<-----/usr/local/bin/yacc-----8<----- #! /usr/bin/sh # Bison as a reentrant yacc: # save parameters: params="" while [[ $# -gt 1 ]]; do params="$params $1" shift done # add flag %pure_parser: tmpfile=/tmp/bison.$$.y echo %pure_parser > $tmpfile cat $1 >> $tmpfile # call bison: echo "/usr/local/bin/bison --yacc $params $1\t\t\t(Pure Parser)" /usr/local/bin/bison --yacc $params $tmpfile # cleanup: rm -f $tmpfile -----8<----------8<----- We still use the normal yacc for a2p.y though!!! We made a softlink called byacc to distinguish between the two versions: ln -s /usr/bin/yacc /usr/local/bin/byacc We build perl using GNU make. We tried the native make once and it worked too. =head2 Testing Perl on BS2000 We still got a few errors during C<make test>. Some of them are the result of using bison. Bison prints I<parser error> instead of I<syntax error>, so we may ignore them. The following list shows our errors, your results may differ: op/numconvert.......FAILED tests 1409-1440 op/regexp...........FAILED tests 483, 496 op/regexp_noamp.....FAILED tests 483, 496 pragma/overload.....FAILED tests 152-153, 170-171 pragma/warnings.....FAILED tests 14, 82, 129, 155, 192, 205, 207 lib/bigfloat........FAILED tests 351-352, 355 lib/bigfltpm........FAILED tests 354-355, 358 lib/complex.........FAILED tests 267, 487 lib/dumper..........FAILED tests 43, 45 Failed 11/231 test scripts, 95.24% okay. 57/10595 subtests failed, 99.46% okay. =head2 Installing Perl on BS2000 We have no nroff on BS2000 POSIX (yet), so we ignored any errors while installing the documentation. =head2 Using Perl in the Posix-Shell of BS2000 BS2000 POSIX doesn't support the shebang notation (C<#!/usr/local/bin/perl>), so you have to use the following lines instead: : # use perl eval 'exec /usr/local/bin/perl -S $0 ${1+"$@"}' if $running_under_some_shell; =head2 Using Perl in "native" BS2000 We don't have much experience with this yet, but try the following: Copy your Perl executable to a BS2000 LLM using bs2cp: C<bs2cp /usr/local/bin/perl 'bs2:perl(perl,l)'> Now you can start it with the following (SDF) command: C</START-PROG FROM-FILE=*MODULE(PERL,PERL),PROG-MODE=*ANY,RUN-MODE=*ADV> First you get the BS2000 commandline prompt ('*'). Here you may enter your parameters, e.g. C<-e 'print "Hello World!\\n";'> (note the double backslash!) or C<-w> and the name of your Perl script. Filenames starting with C</> are searched in the Posix filesystem, others are searched in the BS2000 filesystem. You may even use wildcards if you put a C<%> in front of your filename (e.g. C<-w checkfiles.pl %*.c>). Read your C/C++ manual for additional possibilities of the commandline prompt (look for PARAMETER-PROMPTING). =head2 Floating point anomalies on BS2000 There appears to be a bug in the floating point implementation on BS2000 POSIX systems such that calling int() on the product of a number and a small magnitude number is not the same as calling int() on the quotient of that number and a large magnitude number. For example, in the following Perl code: my $x = 100000.0; my $y = int($x * 1e-5) * 1e5; # '0' my $z = int($x / 1e+5) * 1e5; # '100000' print "\$y is $y and \$z is $z\n"; # $y is 0 and $z is 100000 Although one would expect the quantities $y and $z to be the same and equal to 100000 they will differ and instead will be 0 and 100000 respectively. =head2 Using PerlIO and different encodings on ASCII and EBCDIC partitions Since version 5.8 Perl uses the new PerlIO on BS2000. This enables you using different encodings per IO channel. For example you may use use Encode; open($f, ">:encoding(ascii)", "test.ascii"); print $f "Hello World!\n"; open($f, ">:encoding(posix-bc)", "test.ebcdic"); print $f "Hello World!\n"; open($f, ">:encoding(latin1)", "test.latin1"); print $f "Hello World!\n"; open($f, ">:encoding(utf8)", "test.utf8"); print $f "Hello World!\n"; to get two files containing "Hello World!\n" in ASCII, EBCDIC, ISO Latin-1 (in this example identical to ASCII) respective UTF-EBCDIC (in this example identical to normal EBCDIC). See the documentation of Encode::PerlIO for details. As the PerlIO layer uses raw IO internally, all this totally ignores the type of your filesystem (ASCII or EBCDIC) and the IO_CONVERSION environment variable. If you want to get the old behavior, that the BS2000 IO functions determine conversion depending on the filesystem PerlIO still is your friend. You use IO_CONVERSION as usual and tell Perl, that it should use the native IO layer: export IO_CONVERSION=YES export PERLIO=stdio Now your IO would be ASCII on ASCII partitions and EBCDIC on EBCDIC partitions. See the documentation of PerlIO (without C<Encode::>!) for further possibilities. =head1 AUTHORS Thomas Dorner =head1 SEE ALSO L<INSTALL>, L<perlport>. =head2 Mailing list If you are interested in the z/OS (formerly known as OS/390) and POSIX-BC (BS2000) ports of Perl then see the perl-mvs mailing list. To subscribe, send an empty message to perl-mvs-subscribe@perl.org. See also: https://lists.perl.org/list/perl-mvs.html There are web archives of the mailing list at: https://www.nntp.perl.org/group/perl.mvs/ =head1 HISTORY This document was originally written by Thomas Dorner for the 5.005 release of Perl. This document was podified for the 5.6 release of perl 11 July 2000. =cut perljp.pod 0000644 00000020357 15125556335 0006565 0 ustar 00 =encoding utf8 =head1 NAME perljp - 日本語 Perl ガイド =head1 説明 Perl の世界へようこそ! Perl 5.8.0 より、Unicodeサポートが大幅に強化され、その結果ラテン文字以外の文字コードのサポートが CJK (中国語、日本語、ハングル)を含めて加わりました。Unicodeは世界中の文字を一つの文字コードで扱うことを目指した標準規格であり、東から西、はたまたその間の文字（ギリシャ文字、キリール文字、アラビア文字、ヘブライ文字、ディーヴァナガーリ文字、などなど）や、これまではOSベンダーが独自に定めていた文字(PCおよびMacintosh)がすでに含まれています。 Perl 自身は Unicode で動作します。Perl スクリプト内の文字列リテラルや正規表現は Unicode を前提としています。そして入出力のためには、これまで使われてきたさまざまな文字コードに対応するモジュール、「 Encode 」が標準装備されており、Unicode とこれらの文字コードの相互変換も簡単に行えるようになっています。 現時点で Encode がサポートする文字コードは以下のとおりです。 7bit-jis AdobeStandardEncoding AdobeSymbol AdobeZdingbat ascii big5 big5-hkscs cp1006 cp1026 cp1047 cp1250 cp1251 cp1252 cp1253 cp1254 cp1255 cp1256 cp1257 cp1258 cp37 cp424 cp437 cp500 cp737 cp775 cp850 cp852 cp855 cp856 cp857 cp860 cp861 cp862 cp863 cp864 cp865 cp866 cp869 cp874 cp875 cp932 cp936 cp949 cp950 dingbats euc-cn euc-jp euc-kr gb12345-raw gb2312-raw gsm0338 hp-roman8 hz iso-2022-jp iso-2022-jp-1 iso-8859-1 iso-8859-10 iso-8859-11 iso-8859-13 iso-8859-14 iso-8859-15 iso-8859-16 iso-8859-2 iso-8859-3 iso-8859-4 iso-8859-5 iso-8859-6 iso-8859-7 iso-8859-8 iso-8859-9 iso-ir-165 jis0201-raw jis0208-raw jis0212-raw johab koi8-f koi8-r koi8-u ksc5601-raw MacArabic MacCentralEurRoman MacChineseSimp MacChineseTrad MacCroatian MacCyrillic MacDingbats MacFarsi MacGreek MacHebrew MacIcelandic MacJapanese MacKorean MacRoman MacRomanian MacRumanian MacSami MacSymbol MacThai MacTurkish MacUkrainian nextstep posix-bc shiftjis symbol UCS-2BE UCS-2LE UTF-16 UTF-16BE UTF-16LE UTF-32 UTF-32BE UTF-32LE utf8 viscii (全114種類) 例えば、文字コードFOOのファイルをUTF-8に変換するには、以下のようにします。 perl -Mencoding=FOO,STDOUT,utf8 -pe1 < file.FOO > file.utf8 また、Perlには、全部がPerlで書かれた文字コード変換ユーティリティ、piconvも付属しているので、以下のようにすることもできます。 piconv -f FOO -t utf8 < file.FOO > file.utf8 piconv -f utf8 -t FOO < file.utf8 > file.FOO =head2 (jcode.pl|Jcode.pm|JPerl) からの移行 5.8以前の、スクリプトがEUC-JPであればリテラルだけは扱うことができました。また、入出力を扱うモジュールとしてはJcode.pmが( L<http://openlab.ring.gr.jp/Jcode/> )、perl4用のユーティリティとしてはjcode.plがそれぞれ存在し、日本語の扱えるCGIでよく利用されていることを御存じの方も少なくないかと思われます。ただし、日本語による正規表現をうまく扱うことは不可能でした。 5.005以前のPerlには、日本語に特化したローカライズ版、Jperlが存在しました( L<http://homepage2.nifty.com/kipp/perl/jperl/index.html> ※1)。また、Mac OS 9.x/Classic用のPerl、MacPerlの日本語版もMacJPerlとして存在してました。( L<https://habilis.net/macjperl/> ).これらでは文字コードとしてEUC-JPに加えShift_JISもそのまま扱うことができ、また日本語による正規表現を扱うことも可能でした。 Perl5.8では、これらの機能がすべてPerl本体だけで実現できる上に、日本語のみならず上記114の文字コードをすべて、しかも同時に扱うことができます。さらに、CPANなどから新しい文字コード用のモジュールを入手することも簡単にできるようになっています。 ※1: ホスティングサービスの終了により現在は閲覧できません。 Vector( L<https://www.vector.co.jp/soft/win95/util/se098198.html> )からWindow用のバイナリを、CPAN( L<https://www.cpan.org/src/unsupported/4.036/jperl/> )からperl4用のパッチを入手することができます。 =over 4 =item * 入出力 以下の例はいずれもShift_JISの入力をEUC-JPに変換して出力します。 # jcode.pl require "jcode.pl"; while(<>){ jcode::convert(*_, 'euc', 'sjis'); print; } # Jcode.pm use Jcode; while(<>){ print Jcode->new($_, 'sjis')->euc; } # Perl 5.8 use Encode; while(<>){ from_to($_, 'shiftjis', 'euc-jp'); print; } # Perl 5.8 - encoding を利用して use encoding 'euc-jp', STDIN => 'shiftjis'; while(<>){ print; } =item * Jperl 互換スクリプト いわゆる"shebang"を変更するだけで、Jperl用のscriptのほとんどは変更なしに利用可能だと思われます。 #!/path/to/jperl ↓ #!/path/to/perl -Mencoding=euc-jp 詳しくは perldoc encoding を参照してください。 =back =head2 さらに詳しく Perlには膨大な資料が付属しており、Perlの新機能やUnicodeサポート、そしてEncodeモジュールの使用法などが細かく網羅されています（残念ながら、ほとんど英語ではありますが）。以下のコマンドでそれらの一部を閲覧することが可能です。 perldoc perlunicode # PerlのUnicodeサポート全般 perldoc Encode # Encodeモジュールに関して perldoc Encode::JP # うち日本語文字コードに関して =head2 Perl全般に関する URL =over 4 =item L<https://www.perl.org/> Perl ホームページ =item L<https://www.perl.com/> Perl 財団が営業する文章作品集 =item L<https://www.cpan.org/> CPAN (Comprehensive Perl Archive Network) =item L<https://metacpan.org/> MetaCPAN CPANの検索エンジン =item L<https://lists.perl.org/> Perl メーリングリスト集 =item L<https://perldoc.jp/> perldoc.jp Perl の公式ドキュメント、モジュールドキュメントの日本語訳 =back =head2 Perlの修得に役立つ URL =over 4 =item L<http://www.oreilly.com.tw/> O'Reilly 社のPerl関連書籍(繁体字中国語) =item L<http://www.oreilly.com.cn/> O'Reilly 社のPerl関連書籍(簡体字中国語) =item L<https://www.oreilly.co.jp/catalog/> オライリー社のPerl関連書籍(日本語) =back =head2 Perl に関する団体 =over 4 =item L<https://www.pm.org/groups/asia.html> アジア地域の Perl Mongers (Perlのユーザーグループ) 一覧 =item L<https://japan.perlassociation.org> 一般社団法人Japan Perl Association (JPA) Perl技術及び文化の啓蒙・促進のための組織 =back =head2 Unicode関連のURL =over 4 =item L<https://www.unicode.org/> Unicode コンソーシアム (Unicode規格の選定団体) =item L<https://www.cl.cam.ac.uk/%7Emgk25/unicode.html> UTF-8 and Unicode FAQ for Unix/Linux =item L<https://wiki.kldp.org/Translations/html/UTF8-Unicode-KLDP/UTF8-Unicode-KLDP.html> UTF-8 and Unicode FAQ for Unix/Linux (ハングル訳) =back =head1 AUTHORS =over =item * Jarkko Hietaniemi E<lt>jhi@iki.fiE<gt> =item * Dan Kogai (小飼 弾) E<lt>dankogai@dan.co.jpE<gt> =item * Shogo Ichinose (一野瀬 翔吾) E<lt>shogo82148@gmail.comE<gt> =back =cut perl5301delta.pod 0000644 00000013142 15125556335 0007550 0 ustar 00 =encoding utf8 =head1 NAME perl5301delta - what is new for perl v5.30.1 =head1 DESCRIPTION This document describes differences between the 5.30.0 release and the 5.30.1 release. If you are upgrading from an earlier release such as 5.29.0, first read L<perl5300delta>, which describes differences between 5.29.0 and 5.30.0. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.30.1. If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Module::CoreList> has been upgraded from version 5.20190522 to 5.20191110. =back =head1 Documentation =head2 Changes to Existing Documentation We have attempted to update the documentation to reflect the changes listed in this document. If you find any we have missed, send email to L<perlbug@perl.org|mailto:perlbug@perl.org>. Additionally, documentation has been updated to reference GitHub as the new canonical repository and to describe the new GitHub pull request workflow. =head1 Configuration and Compilation =over 4 =item * The C<ECHO> macro is now defined. This is used in a C<dtrace> rule that was originally changed for FreeBSD, and the FreeBSD make apparently predefines it. The Solaris make does not predefine C<ECHO> which broke this rule on Solaris. L<[perl #17057]|https://github.com/perl/perl5/issues/17057> =back =head1 Testing Tests were added and changed to reflect the other additions and changes in this release. =head1 Platform Support =head2 Platform-Specific Notes =over 4 =item Win32 The locale tests could crash on Win32 due to a Windows bug, and separately due to the CRT throwing an exception if the locale name wasn't validly encoded in the current code page. For the second we now decode the locale name ourselves, and always decode it as UTF-8. L<[perl #16922]|https://github.com/perl/perl5/issues/16922> =back =head1 Selected Bug Fixes =over 4 =item * Setting C<$)> now properly sets supplementary group ids, if you have the necessary privileges. L<[perl #17031]|https://github.com/perl/perl5/issues/17031> =item * C<readline @foo> now evaluates C<@foo> in scalar context. Previously, it would be evaluated in list context, and since readline() pops only one argument from the stack, the stack could underflow, or be left with unexpected values on it. L<[perl #16929]|https://github.com/perl/perl5/issues/16929> =item * sv_gets() now recovers better if the target SV is modified by a signal handler. L<[perl #16960]|https://github.com/perl/perl5/issues/16960> =item * Matching a non-C<SVf_UTF8> string against a regular expression containing Unicode literals could leak an SV on each match attempt. L<[perl #17140]|https://github.com/perl/perl5/issues/17140> =item * C<< sprintf("%.*a", -10000, $x) >> would cause a buffer overflow due to mishandling of the negative precision value. L<[perl #16942]|https://github.com/perl/perl5/issues/16942> =item * C<scalar()> on a reference could cause an erroneous assertion failure during compilation. L<[perl #16969]|https://github.com/perl/perl5/issues/16969> =back =head1 Acknowledgements Perl 5.30.1 represents approximately 6 months of development since Perl 5.30.0 and contains approximately 4,700 lines of changes across 67 files from 14 authors. Excluding auto-generated files, documentation and release tools, there were approximately 910 lines of changes to 20 .pm, .t, .c and .h files. Perl continues to flourish into its fourth decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.30.1: Chris 'BinGOs' Williams, Dan Book, David Mitchell, Hugo van der Sanden, James E Keenan, Karen Etheridge, Karl Williamson, Manuel Mausz, Max Maischein, Nicolas R., Sawyer X, Steve Hay, Tom Hukins, Tony Cook. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the perl bug database at L<https://rt.perl.org/>. There may also be information at L<http://www.perl.org/>, the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications which make it inappropriate to send to a publicly archived mailing list, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 Give Thanks If you wish to thank the Perl 5 Porters for the work we had done in Perl 5, you can do so by running the C<perlthanks> program: perlthanks This will send an email to the Perl 5 Porters list with your show of thanks. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlreapi.pod 0000644 00000073045 15125556335 0007256 0 ustar 00 =head1 NAME perlreapi - Perl regular expression plugin interface =head1 DESCRIPTION As of Perl 5.9.5 there is a new interface for plugging and using regular expression engines other than the default one. Each engine is supposed to provide access to a constant structure of the following format: typedef struct regexp_engine { REGEXP* (*comp) (pTHX_ const SV * const pattern, const U32 flags); I32 (*exec) (pTHX_ REGEXP * const rx, char* stringarg, char* strend, char* strbeg, SSize_t minend, SV* sv, void* data, U32 flags); char* (*intuit) (pTHX_ REGEXP * const rx, SV *sv, const char * const strbeg, char *strpos, char *strend, U32 flags, struct re_scream_pos_data_s *data); SV* (*checkstr) (pTHX_ REGEXP * const rx); void (*free) (pTHX_ REGEXP * const rx); void (*numbered_buff_FETCH) (pTHX_ REGEXP * const rx, const I32 paren, SV * const sv); void (*numbered_buff_STORE) (pTHX_ REGEXP * const rx, const I32 paren, SV const * const value); I32 (*numbered_buff_LENGTH) (pTHX_ REGEXP * const rx, const SV * const sv, const I32 paren); SV* (*named_buff) (pTHX_ REGEXP * const rx, SV * const key, SV * const value, U32 flags); SV* (*named_buff_iter) (pTHX_ REGEXP * const rx, const SV * const lastkey, const U32 flags); SV* (*qr_package)(pTHX_ REGEXP * const rx); #ifdef USE_ITHREADS void* (*dupe) (pTHX_ REGEXP * const rx, CLONE_PARAMS *param); #endif REGEXP* (*op_comp) (...); When a regexp is compiled, its C<engine> field is then set to point at the appropriate structure, so that when it needs to be used Perl can find the right routines to do so. In order to install a new regexp handler, C<$^H{regcomp}> is set to an integer which (when casted appropriately) resolves to one of these structures. When compiling, the C<comp> method is executed, and the resulting C<regexp> structure's engine field is expected to point back at the same structure. The pTHX_ symbol in the definition is a macro used by Perl under threading to provide an extra argument to the routine holding a pointer back to the interpreter that is executing the regexp. So under threading all routines get an extra argument. =head1 Callbacks =head2 comp REGEXP* comp(pTHX_ const SV * const pattern, const U32 flags); Compile the pattern stored in C<pattern> using the given C<flags> and return a pointer to a prepared C<REGEXP> structure that can perform the match. See L</The REGEXP structure> below for an explanation of the individual fields in the REGEXP struct. The C<pattern> parameter is the scalar that was used as the pattern. Previous versions of Perl would pass two C<char*> indicating the start and end of the stringified pattern; the following snippet can be used to get the old parameters: STRLEN plen; char* exp = SvPV(pattern, plen); char* xend = exp + plen; Since any scalar can be passed as a pattern, it's possible to implement an engine that does something with an array (C<< "ook" =~ [ qw/ eek hlagh / ] >>) or with the non-stringified form of a compiled regular expression (C<< "ook" =~ qr/eek/ >>). Perl's own engine will always stringify everything using the snippet above, but that doesn't mean other engines have to. The C<flags> parameter is a bitfield which indicates which of the C<msixpn> flags the regex was compiled with. It also contains additional info, such as if C<use locale> is in effect. The C<eogc> flags are stripped out before being passed to the comp routine. The regex engine does not need to know if any of these are set, as those flags should only affect what Perl does with the pattern and its match variables, not how it gets compiled and executed. By the time the comp callback is called, some of these flags have already had effect (noted below where applicable). However most of their effect occurs after the comp callback has run, in routines that read the C<< rx->extflags >> field which it populates. In general the flags should be preserved in C<< rx->extflags >> after compilation, although the regex engine might want to add or delete some of them to invoke or disable some special behavior in Perl. The flags along with any special behavior they cause are documented below: The pattern modifiers: =over 4 =item C</m> - RXf_PMf_MULTILINE If this is in C<< rx->extflags >> it will be passed to C<Perl_fbm_instr> by C<pp_split> which will treat the subject string as a multi-line string. =item C</s> - RXf_PMf_SINGLELINE =item C</i> - RXf_PMf_FOLD =item C</x> - RXf_PMf_EXTENDED If present on a regex, C<"#"> comments will be handled differently by the tokenizer in some cases. TODO: Document those cases. =item C</p> - RXf_PMf_KEEPCOPY TODO: Document this =item Character set The character set rules are determined by an enum that is contained in this field. This is still experimental and subject to change, but the current interface returns the rules by use of the in-line function C<get_regex_charset(const U32 flags)>. The only currently documented value returned from it is REGEX_LOCALE_CHARSET, which is set if C<use locale> is in effect. If present in C<< rx->extflags >>, C<split> will use the locale dependent definition of whitespace when RXf_SKIPWHITE or RXf_WHITE is in effect. ASCII whitespace is defined as per L<isSPACE|perlapi/isSPACE>, and by the internal macros C<is_utf8_space> under UTF-8, and C<isSPACE_LC> under C<use locale>. =back Additional flags: =over 4 =item RXf_SPLIT This flag was removed in perl 5.18.0. C<split ' '> is now special-cased solely in the parser. RXf_SPLIT is still #defined, so you can test for it. This is how it used to work: If C<split> is invoked as C<split ' '> or with no arguments (which really means C<split(' ', $_)>, see L<split|perlfunc/split>), Perl will set this flag. The regex engine can then check for it and set the SKIPWHITE and WHITE extflags. To do this, the Perl engine does: if (flags & RXf_SPLIT && r->prelen == 1 && r->precomp[0] == ' ') r->extflags |= (RXf_SKIPWHITE|RXf_WHITE); =back These flags can be set during compilation to enable optimizations in the C<split> operator. =over 4 =item RXf_SKIPWHITE This flag was removed in perl 5.18.0. It is still #defined, so you can set it, but doing so will have no effect. This is how it used to work: If the flag is present in C<< rx->extflags >> C<split> will delete whitespace from the start of the subject string before it's operated on. What is considered whitespace depends on if the subject is a UTF-8 string and if the C<RXf_PMf_LOCALE> flag is set. If RXf_WHITE is set in addition to this flag, C<split> will behave like C<split " "> under the Perl engine. =item RXf_START_ONLY Tells the split operator to split the target string on newlines (C<\n>) without invoking the regex engine. Perl's engine sets this if the pattern is C</^/> (C<plen == 1 && *exp == '^'>), even under C</^/s>; see L<split|perlfunc>. Of course a different regex engine might want to use the same optimizations with a different syntax. =item RXf_WHITE Tells the split operator to split the target string on whitespace without invoking the regex engine. The definition of whitespace varies depending on if the target string is a UTF-8 string and on if RXf_PMf_LOCALE is set. Perl's engine sets this flag if the pattern is C<\s+>. =item RXf_NULL Tells the split operator to split the target string on characters. The definition of character varies depending on if the target string is a UTF-8 string. Perl's engine sets this flag on empty patterns, this optimization makes C<split //> much faster than it would otherwise be. It's even faster than C<unpack>. =item RXf_NO_INPLACE_SUBST Added in perl 5.18.0, this flag indicates that a regular expression might perform an operation that would interfere with inplace substitution. For instance it might contain lookbehind, or assign to non-magical variables (such as $REGMARK and $REGERROR) during matching. C<s///> will skip certain optimisations when this is set. =back =head2 exec I32 exec(pTHX_ REGEXP * const rx, char *stringarg, char* strend, char* strbeg, SSize_t minend, SV* sv, void* data, U32 flags); Execute a regexp. The arguments are =over 4 =item rx The regular expression to execute. =item sv This is the SV to be matched against. Note that the actual char array to be matched against is supplied by the arguments described below; the SV is just used to determine UTF8ness, C<pos()> etc. =item strbeg Pointer to the physical start of the string. =item strend Pointer to the character following the physical end of the string (i.e. the C<\0>, if any). =item stringarg Pointer to the position in the string where matching should start; it might not be equal to C<strbeg> (for example in a later iteration of C</.../g>). =item minend Minimum length of string (measured in bytes from C<stringarg>) that must match; if the engine reaches the end of the match but hasn't reached this position in the string, it should fail. =item data Optimisation data; subject to change. =item flags Optimisation flags; subject to change. =back =head2 intuit char* intuit(pTHX_ REGEXP * const rx, SV *sv, const char * const strbeg, char *strpos, char *strend, const U32 flags, struct re_scream_pos_data_s *data); Find the start position where a regex match should be attempted, or possibly if the regex engine should not be run because the pattern can't match. This is called, as appropriate, by the core, depending on the values of the C<extflags> member of the C<regexp> structure. Arguments: rx: the regex to match against sv: the SV being matched: only used for utf8 flag; the string itself is accessed via the pointers below. Note that on something like an overloaded SV, SvPOK(sv) may be false and the string pointers may point to something unrelated to the SV itself. strbeg: real beginning of string strpos: the point in the string at which to begin matching strend: pointer to the byte following the last char of the string flags currently unused; set to 0 data: currently unused; set to NULL =head2 checkstr SV* checkstr(pTHX_ REGEXP * const rx); Return a SV containing a string that must appear in the pattern. Used by C<split> for optimising matches. =head2 free void free(pTHX_ REGEXP * const rx); Called by Perl when it is freeing a regexp pattern so that the engine can release any resources pointed to by the C<pprivate> member of the C<regexp> structure. This is only responsible for freeing private data; Perl will handle releasing anything else contained in the C<regexp> structure. =head2 Numbered capture callbacks Called to get/set the value of C<$`>, C<$'>, C<$&> and their named equivalents, ${^PREMATCH}, ${^POSTMATCH} and ${^MATCH}, as well as the numbered capture groups (C<$1>, C<$2>, ...). The C<paren> parameter will be C<1> for C<$1>, C<2> for C<$2> and so forth, and have these symbolic values for the special variables: ${^PREMATCH} RX_BUFF_IDX_CARET_PREMATCH ${^POSTMATCH} RX_BUFF_IDX_CARET_POSTMATCH ${^MATCH} RX_BUFF_IDX_CARET_FULLMATCH $` RX_BUFF_IDX_PREMATCH $' RX_BUFF_IDX_POSTMATCH $& RX_BUFF_IDX_FULLMATCH Note that in Perl 5.17.3 and earlier, the last three constants were also used for the caret variants of the variables. The names have been chosen by analogy with L<Tie::Scalar> methods names with an additional B<LENGTH> callback for efficiency. However named capture variables are currently not tied internally but implemented via magic. =head3 numbered_buff_FETCH void numbered_buff_FETCH(pTHX_ REGEXP * const rx, const I32 paren, SV * const sv); Fetch a specified numbered capture. C<sv> should be set to the scalar to return, the scalar is passed as an argument rather than being returned from the function because when it's called Perl already has a scalar to store the value, creating another one would be redundant. The scalar can be set with C<sv_setsv>, C<sv_setpvn> and friends, see L<perlapi>. This callback is where Perl untaints its own capture variables under taint mode (see L<perlsec>). See the C<Perl_reg_numbered_buff_fetch> function in F<regcomp.c> for how to untaint capture variables if that's something you'd like your engine to do as well. =head3 numbered_buff_STORE void (*numbered_buff_STORE) (pTHX_ REGEXP * const rx, const I32 paren, SV const * const value); Set the value of a numbered capture variable. C<value> is the scalar that is to be used as the new value. It's up to the engine to make sure this is used as the new value (or reject it). Example: if ("ook" =~ /(o*)/) { # 'paren' will be '1' and 'value' will be 'ee' $1 =~ tr/o/e/; } Perl's own engine will croak on any attempt to modify the capture variables, to do this in another engine use the following callback (copied from C<Perl_reg_numbered_buff_store>): void Example_reg_numbered_buff_store(pTHX_ REGEXP * const rx, const I32 paren, SV const * const value) { PERL_UNUSED_ARG(rx); PERL_UNUSED_ARG(paren); PERL_UNUSED_ARG(value); if (!PL_localizing) Perl_croak(aTHX_ PL_no_modify); } Actually Perl will not I<always> croak in a statement that looks like it would modify a numbered capture variable. This is because the STORE callback will not be called if Perl can determine that it doesn't have to modify the value. This is exactly how tied variables behave in the same situation: package CaptureVar; use parent 'Tie::Scalar'; sub TIESCALAR { bless [] } sub FETCH { undef } sub STORE { die "This doesn't get called" } package main; tie my $sv => "CaptureVar"; $sv =~ y/a/b/; Because C<$sv> is C<undef> when the C<y///> operator is applied to it, the transliteration won't actually execute and the program won't C<die>. This is different to how 5.8 and earlier versions behaved since the capture variables were READONLY variables then; now they'll just die when assigned to in the default engine. =head3 numbered_buff_LENGTH I32 numbered_buff_LENGTH (pTHX_ REGEXP * const rx, const SV * const sv, const I32 paren); Get the C<length> of a capture variable. There's a special callback for this so that Perl doesn't have to do a FETCH and run C<length> on the result, since the length is (in Perl's case) known from an offset stored in C<< rx->offs >>, this is much more efficient: I32 s1 = rx->offs[paren].start; I32 s2 = rx->offs[paren].end; I32 len = t1 - s1; This is a little bit more complex in the case of UTF-8, see what C<Perl_reg_numbered_buff_length> does with L<is_utf8_string_loclen|perlapi/is_utf8_string_loclen>. =head2 Named capture callbacks Called to get/set the value of C<%+> and C<%->, as well as by some utility functions in L<re>. There are two callbacks, C<named_buff> is called in all the cases the FETCH, STORE, DELETE, CLEAR, EXISTS and SCALAR L<Tie::Hash> callbacks would be on changes to C<%+> and C<%-> and C<named_buff_iter> in the same cases as FIRSTKEY and NEXTKEY. The C<flags> parameter can be used to determine which of these operations the callbacks should respond to. The following flags are currently defined: Which L<Tie::Hash> operation is being performed from the Perl level on C<%+> or C<%+>, if any: RXapif_FETCH RXapif_STORE RXapif_DELETE RXapif_CLEAR RXapif_EXISTS RXapif_SCALAR RXapif_FIRSTKEY RXapif_NEXTKEY If C<%+> or C<%-> is being operated on, if any. RXapif_ONE /* %+ */ RXapif_ALL /* %- */ If this is being called as C<re::regname>, C<re::regnames> or C<re::regnames_count>, if any. The first two will be combined with C<RXapif_ONE> or C<RXapif_ALL>. RXapif_REGNAME RXapif_REGNAMES RXapif_REGNAMES_COUNT Internally C<%+> and C<%-> are implemented with a real tied interface via L<Tie::Hash::NamedCapture>. The methods in that package will call back into these functions. However the usage of L<Tie::Hash::NamedCapture> for this purpose might change in future releases. For instance this might be implemented by magic instead (would need an extension to mgvtbl). =head3 named_buff SV* (*named_buff) (pTHX_ REGEXP * const rx, SV * const key, SV * const value, U32 flags); =head3 named_buff_iter SV* (*named_buff_iter) (pTHX_ REGEXP * const rx, const SV * const lastkey, const U32 flags); =head2 qr_package SV* qr_package(pTHX_ REGEXP * const rx); The package the qr// magic object is blessed into (as seen by C<ref qr//>). It is recommended that engines change this to their package name for identification regardless of if they implement methods on the object. The package this method returns should also have the internal C<Regexp> package in its C<@ISA>. C<< qr//->isa("Regexp") >> should always be true regardless of what engine is being used. Example implementation might be: SV* Example_qr_package(pTHX_ REGEXP * const rx) { PERL_UNUSED_ARG(rx); return newSVpvs("re::engine::Example"); } Any method calls on an object created with C<qr//> will be dispatched to the package as a normal object. use re::engine::Example; my $re = qr//; $re->meth; # dispatched to re::engine::Example::meth() To retrieve the C<REGEXP> object from the scalar in an XS function use the C<SvRX> macro, see L<"REGEXP Functions" in perlapi|perlapi/REGEXP Functions>. void meth(SV * rv) PPCODE: REGEXP * re = SvRX(sv); =head2 dupe void* dupe(pTHX_ REGEXP * const rx, CLONE_PARAMS *param); On threaded builds a regexp may need to be duplicated so that the pattern can be used by multiple threads. This routine is expected to handle the duplication of any private data pointed to by the C<pprivate> member of the C<regexp> structure. It will be called with the preconstructed new C<regexp> structure as an argument, the C<pprivate> member will point at the B<old> private structure, and it is this routine's responsibility to construct a copy and return a pointer to it (which Perl will then use to overwrite the field as passed to this routine.) This allows the engine to dupe its private data but also if necessary modify the final structure if it really must. On unthreaded builds this field doesn't exist. =head2 op_comp This is private to the Perl core and subject to change. Should be left null. =head1 The REGEXP structure The REGEXP struct is defined in F<regexp.h>. All regex engines must be able to correctly build such a structure in their L</comp> routine. The REGEXP structure contains all the data that Perl needs to be aware of to properly work with the regular expression. It includes data about optimisations that Perl can use to determine if the regex engine should really be used, and various other control info that is needed to properly execute patterns in various contexts, such as if the pattern anchored in some way, or what flags were used during the compile, or if the program contains special constructs that Perl needs to be aware of. In addition it contains two fields that are intended for the private use of the regex engine that compiled the pattern. These are the C<intflags> and C<pprivate> members. C<pprivate> is a void pointer to an arbitrary structure, whose use and management is the responsibility of the compiling engine. Perl will never modify either of these values. typedef struct regexp { /* what engine created this regexp? */ const struct regexp_engine* engine; /* what re is this a lightweight copy of? */ struct regexp* mother_re; /* Information about the match that the Perl core uses to manage * things */ U32 extflags; /* Flags used both externally and internally */ I32 minlen; /* mininum possible number of chars in */ string to match */ I32 minlenret; /* mininum possible number of chars in $& */ U32 gofs; /* chars left of pos that we search from */ /* substring data about strings that must appear in the final match, used for optimisations */ struct reg_substr_data *substrs; U32 nparens; /* number of capture groups */ /* private engine specific data */ U32 intflags; /* Engine Specific Internal flags */ void *pprivate; /* Data private to the regex engine which created this object. */ /* Data about the last/current match. These are modified during * matching*/ U32 lastparen; /* highest close paren matched ($+) */ U32 lastcloseparen; /* last close paren matched ($^N) */ regexp_paren_pair *offs; /* Array of offsets for (@-) and (@+) */ char *subbeg; /* saved or original string so \digit works forever. */ SV_SAVED_COPY /* If non-NULL, SV which is COW from original */ I32 sublen; /* Length of string pointed by subbeg */ I32 suboffset; /* byte offset of subbeg from logical start of str */ I32 subcoffset; /* suboffset equiv, but in chars (for @-/@+) */ /* Information about the match that isn't often used */ I32 prelen; /* length of precomp */ const char *precomp; /* pre-compilation regular expression */ char *wrapped; /* wrapped version of the pattern */ I32 wraplen; /* length of wrapped */ I32 seen_evals; /* number of eval groups in the pattern - for security checks */ HV *paren_names; /* Optional hash of paren names */ /* Refcount of this regexp */ I32 refcnt; /* Refcount of this regexp */ } regexp; The fields are discussed in more detail below: =head2 C<engine> This field points at a C<regexp_engine> structure which contains pointers to the subroutines that are to be used for performing a match. It is the compiling routine's responsibility to populate this field before returning the regexp object. Internally this is set to C<NULL> unless a custom engine is specified in C<$^H{regcomp}>, Perl's own set of callbacks can be accessed in the struct pointed to by C<RE_ENGINE_PTR>. =head2 C<mother_re> TODO, see L<http://www.mail-archive.com/perl5-changes@perl.org/msg17328.html> =head2 C<extflags> This will be used by Perl to see what flags the regexp was compiled with, this will normally be set to the value of the flags parameter by the L<comp|/comp> callback. See the L<comp|/comp> documentation for valid flags. =head2 C<minlen> C<minlenret> The minimum string length (in characters) required for the pattern to match. This is used to prune the search space by not bothering to match any closer to the end of a string than would allow a match. For instance there is no point in even starting the regex engine if the minlen is 10 but the string is only 5 characters long. There is no way that the pattern can match. C<minlenret> is the minimum length (in characters) of the string that would be found in $& after a match. The difference between C<minlen> and C<minlenret> can be seen in the following pattern: /ns(?=\d)/ where the C<minlen> would be 3 but C<minlenret> would only be 2 as the \d is required to match but is not actually included in the matched content. This distinction is particularly important as the substitution logic uses the C<minlenret> to tell if it can do in-place substitutions (these can result in considerable speed-up). =head2 C<gofs> Left offset from pos() to start match at. =head2 C<substrs> Substring data about strings that must appear in the final match. This is currently only used internally by Perl's engine, but might be used in the future for all engines for optimisations. =head2 C<nparens>, C<lastparen>, and C<lastcloseparen> These fields are used to keep track of: how many paren capture groups there are in the pattern; which was the highest paren to be closed (see L<perlvar/$+>); and which was the most recent paren to be closed (see L<perlvar/$^N>). =head2 C<intflags> The engine's private copy of the flags the pattern was compiled with. Usually this is the same as C<extflags> unless the engine chose to modify one of them. =head2 C<pprivate> A void* pointing to an engine-defined data structure. The Perl engine uses the C<regexp_internal> structure (see L<perlreguts/Base Structures>) but a custom engine should use something else. =head2 C<offs> A C<regexp_paren_pair> structure which defines offsets into the string being matched which correspond to the C<$&> and C<$1>, C<$2> etc. captures, the C<regexp_paren_pair> struct is defined as follows: typedef struct regexp_paren_pair { I32 start; I32 end; } regexp_paren_pair; If C<< ->offs[num].start >> or C<< ->offs[num].end >> is C<-1> then that capture group did not match. C<< ->offs[0].start/end >> represents C<$&> (or C<${^MATCH}> under C</p>) and C<< ->offs[paren].end >> matches C<$$paren> where C<$paren >= 1>. =head2 C<precomp> C<prelen> Used for optimisations. C<precomp> holds a copy of the pattern that was compiled and C<prelen> its length. When a new pattern is to be compiled (such as inside a loop) the internal C<regcomp> operator checks if the last compiled C<REGEXP>'s C<precomp> and C<prelen> are equivalent to the new one, and if so uses the old pattern instead of compiling a new one. The relevant snippet from C<Perl_pp_regcomp>: if (!re || !re->precomp || re->prelen != (I32)len || memNE(re->precomp, t, len)) /* Compile a new pattern */ =head2 C<paren_names> This is a hash used internally to track named capture groups and their offsets. The keys are the names of the buffers the values are dualvars, with the IV slot holding the number of buffers with the given name and the pv being an embedded array of I32. The values may also be contained independently in the data array in cases where named backreferences are used. =head2 C<substrs> Holds information on the longest string that must occur at a fixed offset from the start of the pattern, and the longest string that must occur at a floating offset from the start of the pattern. Used to do Fast-Boyer-Moore searches on the string to find out if its worth using the regex engine at all, and if so where in the string to search. =head2 C<subbeg> C<sublen> C<saved_copy> C<suboffset> C<subcoffset> Used during the execution phase for managing search and replace patterns, and for providing the text for C<$&>, C<$1> etc. C<subbeg> points to a buffer (either the original string, or a copy in the case of C<RX_MATCH_COPIED(rx)>), and C<sublen> is the length of the buffer. The C<RX_OFFS> start and end indices index into this buffer. In the presence of the C<REXEC_COPY_STR> flag, but with the addition of the C<REXEC_COPY_SKIP_PRE> or C<REXEC_COPY_SKIP_POST> flags, an engine can choose not to copy the full buffer (although it must still do so in the presence of C<RXf_PMf_KEEPCOPY> or the relevant bits being set in C<PL_sawampersand>). In this case, it may set C<suboffset> to indicate the number of bytes from the logical start of the buffer to the physical start (i.e. C<subbeg>). It should also set C<subcoffset>, the number of characters in the offset. The latter is needed to support C<@-> and C<@+> which work in characters, not bytes. =head2 C<wrapped> C<wraplen> Stores the string C<qr//> stringifies to. The Perl engine for example stores C<(?^:eek)> in the case of C<qr/eek/>. When using a custom engine that doesn't support the C<(?:)> construct for inline modifiers, it's probably best to have C<qr//> stringify to the supplied pattern, note that this will create undesired patterns in cases such as: my $x = qr/a|b/; # "a|b" my $y = qr/c/i; # "c" my $z = qr/$x$y/; # "a|bc" There's no solution for this problem other than making the custom engine understand a construct like C<(?:)>. =head2 C<seen_evals> This stores the number of eval groups in the pattern. This is used for security purposes when embedding compiled regexes into larger patterns with C<qr//>. =head2 C<refcnt> The number of times the structure is referenced. When this falls to 0, the regexp is automatically freed by a call to pregfree. This should be set to 1 in each engine's L</comp> routine. =head1 HISTORY Originally part of L<perlreguts>. =head1 AUTHORS Originally written by Yves Orton, expanded by E<AElig>var ArnfjE<ouml>rE<eth> Bjarmason. =head1 LICENSE Copyright 2006 Yves Orton and 2007 E<AElig>var ArnfjE<ouml>rE<eth> Bjarmason. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. =cut perllol.pod 0000644 00000022554 15125556335 0006743 0 ustar 00 =head1 NAME perllol - Manipulating Arrays of Arrays in Perl =head1 DESCRIPTION =head2 Declaration and Access of Arrays of Arrays The simplest two-level data structure to build in Perl is an array of arrays, sometimes casually called a list of lists. It's reasonably easy to understand, and almost everything that applies here will also be applicable later on with the fancier data structures. An array of an array is just a regular old array @AoA that you can get at with two subscripts, like C<$AoA[3][2]>. Here's a declaration of the array: use 5.010; # so we can use say() # assign to our array, an array of array references @AoA = ( [ "fred", "barney", "pebbles", "bambam", "dino", ], [ "george", "jane", "elroy", "judy", ], [ "homer", "bart", "marge", "maggie", ], ); say $AoA[2][1]; bart Now you should be very careful that the outer bracket type is a round one, that is, a parenthesis. That's because you're assigning to an @array, so you need parentheses. If you wanted there I<not> to be an @AoA, but rather just a reference to it, you could do something more like this: # assign a reference to array of array references $ref_to_AoA = [ [ "fred", "barney", "pebbles", "bambam", "dino", ], [ "george", "jane", "elroy", "judy", ], [ "homer", "bart", "marge", "maggie", ], ]; say $ref_to_AoA->[2][1]; bart Notice that the outer bracket type has changed, and so our access syntax has also changed. That's because unlike C, in perl you can't freely interchange arrays and references thereto. $ref_to_AoA is a reference to an array, whereas @AoA is an array proper. Likewise, C<$AoA[2]> is not an array, but an array ref. So how come you can write these: $AoA[2][2] $ref_to_AoA->[2][2] instead of having to write these: $AoA[2]->[2] $ref_to_AoA->[2]->[2] Well, that's because the rule is that on adjacent brackets only (whether square or curly), you are free to omit the pointer dereferencing arrow. But you cannot do so for the very first one if it's a scalar containing a reference, which means that $ref_to_AoA always needs it. =head2 Growing Your Own That's all well and good for declaration of a fixed data structure, but what if you wanted to add new elements on the fly, or build it up entirely from scratch? First, let's look at reading it in from a file. This is something like adding a row at a time. We'll assume that there's a flat file in which each line is a row and each word an element. If you're trying to develop an @AoA array containing all these, here's the right way to do that: while (<>) { @tmp = split; push @AoA, [ @tmp ]; } You might also have loaded that from a function: for $i ( 1 .. 10 ) { $AoA[$i] = [ somefunc($i) ]; } Or you might have had a temporary variable sitting around with the array in it. for $i ( 1 .. 10 ) { @tmp = somefunc($i); $AoA[$i] = [ @tmp ]; } It's important you make sure to use the C<[ ]> array reference constructor. That's because this wouldn't work: $AoA[$i] = @tmp; # WRONG! The reason that doesn't do what you want is because assigning a named array like that to a scalar is taking an array in scalar context, which means just counts the number of elements in @tmp. If you are running under C<use strict> (and if you aren't, why in the world aren't you?), you'll have to add some declarations to make it happy: use strict; my(@AoA, @tmp); while (<>) { @tmp = split; push @AoA, [ @tmp ]; } Of course, you don't need the temporary array to have a name at all: while (<>) { push @AoA, [ split ]; } You also don't have to use push(). You could just make a direct assignment if you knew where you wanted to put it: my (@AoA, $i, $line); for $i ( 0 .. 10 ) { $line = <>; $AoA[$i] = [ split " ", $line ]; } or even just my (@AoA, $i); for $i ( 0 .. 10 ) { $AoA[$i] = [ split " ", <> ]; } You should in general be leery of using functions that could potentially return lists in scalar context without explicitly stating such. This would be clearer to the casual reader: my (@AoA, $i); for $i ( 0 .. 10 ) { $AoA[$i] = [ split " ", scalar(<>) ]; } If you wanted to have a $ref_to_AoA variable as a reference to an array, you'd have to do something like this: while (<>) { push @$ref_to_AoA, [ split ]; } Now you can add new rows. What about adding new columns? If you're dealing with just matrices, it's often easiest to use simple assignment: for $x (1 .. 10) { for $y (1 .. 10) { $AoA[$x][$y] = func($x, $y); } } for $x ( 3, 7, 9 ) { $AoA[$x][20] += func2($x); } It doesn't matter whether those elements are already there or not: it'll gladly create them for you, setting intervening elements to C<undef> as need be. If you wanted just to append to a row, you'd have to do something a bit funnier looking: # add new columns to an existing row push @{ $AoA[0] }, "wilma", "betty"; # explicit deref =head2 Access and Printing Now it's time to print your data structure out. How are you going to do that? Well, if you want only one of the elements, it's trivial: print $AoA[0][0]; If you want to print the whole thing, though, you can't say print @AoA; # WRONG because you'll get just references listed, and perl will never automatically dereference things for you. Instead, you have to roll yourself a loop or two. This prints the whole structure, using the shell-style for() construct to loop across the outer set of subscripts. for $aref ( @AoA ) { say "\t [ @$aref ],"; } If you wanted to keep track of subscripts, you might do this: for $i ( 0 .. $#AoA ) { say "\t elt $i is [ @{$AoA[$i]} ],"; } or maybe even this. Notice the inner loop. for $i ( 0 .. $#AoA ) { for $j ( 0 .. $#{$AoA[$i]} ) { say "elt $i $j is $AoA[$i][$j]"; } } As you can see, it's getting a bit complicated. That's why sometimes is easier to take a temporary on your way through: for $i ( 0 .. $#AoA ) { $aref = $AoA[$i]; for $j ( 0 .. $#{$aref} ) { say "elt $i $j is $AoA[$i][$j]"; } } Hmm... that's still a bit ugly. How about this: for $i ( 0 .. $#AoA ) { $aref = $AoA[$i]; $n = @$aref - 1; for $j ( 0 .. $n ) { say "elt $i $j is $AoA[$i][$j]"; } } When you get tired of writing a custom print for your data structures, you might look at the standard L<Dumpvalue> or L<Data::Dumper> modules. The former is what the Perl debugger uses, while the latter generates parsable Perl code. For example: use v5.14; # using the + prototype, new to v5.14 sub show(+) { require Dumpvalue; state $prettily = new Dumpvalue:: tick => q("), compactDump => 1, # comment these two lines # out veryCompact => 1, # if you want a bigger # dump ; dumpValue $prettily @_; } # Assign a list of array references to an array. my @AoA = ( [ "fred", "barney" ], [ "george", "jane", "elroy" ], [ "homer", "marge", "bart" ], ); push @{ $AoA[0] }, "wilma", "betty"; show @AoA; will print out: 0 0..3 "fred" "barney" "wilma" "betty" 1 0..2 "george" "jane" "elroy" 2 0..2 "homer" "marge" "bart" Whereas if you comment out the two lines I said you might wish to, then it shows it to you this way instead: 0 ARRAY(0x8031d0) 0 "fred" 1 "barney" 2 "wilma" 3 "betty" 1 ARRAY(0x803d40) 0 "george" 1 "jane" 2 "elroy" 2 ARRAY(0x803e10) 0 "homer" 1 "marge" 2 "bart" =head2 Slices If you want to get at a slice (part of a row) in a multidimensional array, you're going to have to do some fancy subscripting. That's because while we have a nice synonym for single elements via the pointer arrow for dereferencing, no such convenience exists for slices. Here's how to do one operation using a loop. We'll assume an @AoA variable as before. @part = (); $x = 4; for ($y = 7; $y < 13; $y++) { push @part, $AoA[$x][$y]; } That same loop could be replaced with a slice operation: @part = @{$AoA[4]}[7..12]; or spaced out a bit: @part = @{ $AoA[4] } [ 7..12 ]; But as you might well imagine, this can get pretty rough on the reader. Ah, but what if you wanted a I<two-dimensional slice>, such as having $x run from 4..8 and $y run from 7 to 12? Hmm... here's the simple way: @newAoA = (); for ($startx = $x = 4; $x <= 8; $x++) { for ($starty = $y = 7; $y <= 12; $y++) { $newAoA[$x - $startx][$y - $starty] = $AoA[$x][$y]; } } We can reduce some of the looping through slices for ($x = 4; $x <= 8; $x++) { push @newAoA, [ @{ $AoA[$x] } [ 7..12 ] ]; } If you were into Schwartzian Transforms, you would probably have selected map for that @newAoA = map { [ @{ $AoA[$_] } [ 7..12 ] ] } 4 .. 8; Although if your manager accused you of seeking job security (or rapid insecurity) through inscrutable code, it would be hard to argue. :-) If I were you, I'd put that in a function: @newAoA = splice_2D( \@AoA, 4 => 8, 7 => 12 ); sub splice_2D { my $lrr = shift; # ref to array of array refs! my ($x_lo, $x_hi, $y_lo, $y_hi) = @_; return map { [ @{ $lrr->[$_] } [ $y_lo .. $y_hi ] ] } $x_lo .. $x_hi; } =head1 SEE ALSO L<perldata>, L<perlref>, L<perldsc> =head1 AUTHOR Tom Christiansen <F<tchrist@perl.com>> Last update: Tue Apr 26 18:30:55 MDT 2011 perlhacktut.pod 0000644 00000014011 15125556335 0007605 0 ustar 00 =encoding utf8 =for comment Consistent formatting of this file is achieved with: perl ./Porting/podtidy pod/perlhacktut.pod =head1 NAME perlhacktut - Walk through the creation of a simple C code patch =head1 DESCRIPTION This document takes you through a simple patch example. If you haven't read L<perlhack> yet, go do that first! You might also want to read through L<perlsource> too. Once you're done here, check out L<perlhacktips> next. =head1 EXAMPLE OF A SIMPLE PATCH Let's take a simple patch from start to finish. Here's something Larry suggested: if a C<U> is the first active format during a C<pack>, (for example, C<pack "U3C8", @stuff>) then the resulting string should be treated as UTF-8 encoded. If you are working with a git clone of the Perl repository, you will want to create a branch for your changes. This will make creating a proper patch much simpler. See the L<perlgit> for details on how to do this. =head2 Writing the patch How do we prepare to fix this up? First we locate the code in question - the C<pack> happens at runtime, so it's going to be in one of the F<pp> files. Sure enough, C<pp_pack> is in F<pp.c>. Since we're going to be altering this file, let's copy it to F<pp.c~>. [Well, it was in F<pp.c> when this tutorial was written. It has now been split off with C<pp_unpack> to its own file, F<pp_pack.c>] Now let's look over C<pp_pack>: we take a pattern into C<pat>, and then loop over the pattern, taking each format character in turn into C<datum_type>. Then for each possible format character, we swallow up the other arguments in the pattern (a field width, an asterisk, and so on) and convert the next chunk input into the specified format, adding it onto the output SV C<cat>. How do we know if the C<U> is the first format in the C<pat>? Well, if we have a pointer to the start of C<pat> then, if we see a C<U> we can test whether we're still at the start of the string. So, here's where C<pat> is set up: STRLEN fromlen; char *pat = SvPVx(*++MARK, fromlen); char *patend = pat + fromlen; I32 len; I32 datumtype; SV *fromstr; We'll have another string pointer in there: STRLEN fromlen; char *pat = SvPVx(*++MARK, fromlen); char *patend = pat + fromlen; + char *patcopy; I32 len; I32 datumtype; SV *fromstr; And just before we start the loop, we'll set C<patcopy> to be the start of C<pat>: items = SP - MARK; MARK++; SvPVCLEAR(cat); + patcopy = pat; while (pat < patend) { Now if we see a C<U> which was at the start of the string, we turn on the C<UTF8> flag for the output SV, C<cat>: + if (datumtype == 'U' && pat==patcopy+1) + SvUTF8_on(cat); if (datumtype == '#') { while (pat < patend && *pat != '\n') pat++; Remember that it has to be C<patcopy+1> because the first character of the string is the C<U> which has been swallowed into C<datumtype!> Oops, we forgot one thing: what if there are spaces at the start of the pattern? C<pack(" U*", @stuff)> will have C<U> as the first active character, even though it's not the first thing in the pattern. In this case, we have to advance C<patcopy> along with C<pat> when we see spaces: if (isSPACE(datumtype)) continue; needs to become if (isSPACE(datumtype)) { patcopy++; continue; } OK. That's the C part done. Now we must do two additional things before this patch is ready to go: we've changed the behaviour of Perl, and so we must document that change. We must also provide some more regression tests to make sure our patch works and doesn't create a bug somewhere else along the line. =head2 Testing the patch The regression tests for each operator live in F<t/op/>, and so we make a copy of F<t/op/pack.t> to F<t/op/pack.t~>. Now we can add our tests to the end. First, we'll test that the C<U> does indeed create Unicode strings. t/op/pack.t has a sensible ok() function, but if it didn't we could use the one from t/test.pl. require './test.pl'; plan( tests => 159 ); so instead of this: print 'not ' unless "1.20.300.4000" eq sprintf "%vd", pack("U*",1,20,300,4000); print "ok $test\n"; $test++; we can write the more sensible (see L<Test::More> for a full explanation of is() and other testing functions). is( "1.20.300.4000", sprintf "%vd", pack("U*",1,20,300,4000), "U* produces Unicode" ); Now we'll test that we got that space-at-the-beginning business right: is( "1.20.300.4000", sprintf "%vd", pack(" U*",1,20,300,4000), " with spaces at the beginning" ); And finally we'll test that we don't make Unicode strings if C<U> is B<not> the first active format: isnt( v1.20.300.4000, sprintf "%vd", pack("C0U*",1,20,300,4000), "U* not first isn't Unicode" ); Mustn't forget to change the number of tests which appears at the top, or else the automated tester will get confused. This will either look like this: print "1..156\n"; or this: plan( tests => 156 ); We now compile up Perl, and run it through the test suite. Our new tests pass, hooray! =head2 Documenting the patch Finally, the documentation. The job is never done until the paperwork is over, so let's describe the change we've just made. The relevant place is F<pod/perlfunc.pod>; again, we make a copy, and then we'll insert this text in the description of C<pack>: =item * If the pattern begins with a C<U>, the resulting string will be treated as UTF-8-encoded Unicode. You can force UTF-8 encoding on in a string with an initial C<U0>, and the bytes that follow will be interpreted as Unicode characters. If you don't want this to happen, you can begin your pattern with C<C0> (or anything else) to force Perl not to UTF-8 encode your string, and then follow this with a C<U*> somewhere in your pattern. =head2 Submit See L<perlhack> for details on how to submit this patch. =head1 AUTHOR This document was originally written by Nathan Torkington, and is maintained by the perl5-porters mailing list. perlriscos.pod 0000644 00000002771 15125556335 0007456 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specifically designed to be readable as is. =head1 NAME perlriscos - Perl version 5 for RISC OS =head1 DESCRIPTION This document gives instructions for building Perl for RISC OS. It is complicated by the need to cross compile. There is a binary version of perl available from L<http://www.cp15.org/perl/> which you may wish to use instead of trying to compile it yourself. =head1 BUILD You need an installed and working gccsdk cross compiler L<http://gccsdk.riscos.info/> and REXEN L<http://www.cp15.org/programming/> Firstly, copy the source and build a native copy of perl for your host system. Then, in the source to be cross compiled: =over 4 =item 1. $ ./Configure =item 2. Select the riscos hint file. The default answers for the rest of the questions are usually sufficient. Note that, if you wish to run Configure non-interactively (see the INSTALL document for details), to have it select the correct hint file, you'll need to provide the argument -Dhintfile=riscos on the Configure command-line. =item 3. $ make miniperl =item 4. This should build miniperl and then fail when it tries to run it. =item 5. Copy the miniperl executable from the native build done earlier to replace the cross compiled miniperl. =item 6. $ make =item 7. This will use miniperl to complete the rest of the build. =back =head1 AUTHOR Alex Waugh <alex@alexwaugh.com> perlpod.pod 0000644 00000055044 15125556335 0006737 0 ustar 00 =for comment This document is in Pod format. To read this, use a Pod formatter, like "perldoc perlpod". =head1 NAME X<POD> X<plain old documentation> perlpod - the Plain Old Documentation format =head1 DESCRIPTION Pod is a simple-to-use markup language used for writing documentation for Perl, Perl programs, and Perl modules. Translators are available for converting Pod to various formats like plain text, HTML, man pages, and more. Pod markup consists of three basic kinds of paragraphs: L<ordinary|/"Ordinary Paragraph">, L<verbatim|/"Verbatim Paragraph">, and L<command|/"Command Paragraph">. =head2 Ordinary Paragraph X<POD, ordinary paragraph> Most paragraphs in your documentation will be ordinary blocks of text, like this one. You can simply type in your text without any markup whatsoever, and with just a blank line before and after. When it gets formatted, it will undergo minimal formatting, like being rewrapped, probably put into a proportionally spaced font, and maybe even justified. You can use formatting codes in ordinary paragraphs, for B<bold>, I<italic>, C<code-style>, L<hyperlinks|perlfaq>, and more. Such codes are explained in the "L<Formatting Codes|/"Formatting Codes">" section, below. =head2 Verbatim Paragraph X<POD, verbatim paragraph> X<verbatim> Verbatim paragraphs are usually used for presenting a codeblock or other text which does not require any special parsing or formatting, and which shouldn't be wrapped. A verbatim paragraph is distinguished by having its first character be a space or a tab. (And commonly, all its lines begin with spaces and/or tabs.) It should be reproduced exactly, with tabs assumed to be on 8-column boundaries. There are no special formatting codes, so you can't italicize or anything like that. A \ means \, and nothing else. =head2 Command Paragraph X<POD, command> A command paragraph is used for special treatment of whole chunks of text, usually as headings or parts of lists. All command paragraphs (which are typically only one line long) start with "=", followed by an identifier, followed by arbitrary text that the command can use however it pleases. Currently recognized commands are =pod =head1 Heading Text =head2 Heading Text =head3 Heading Text =head4 Heading Text =over indentlevel =item stuff =back =begin format =end format =for format text... =encoding type =cut To explain them each in detail: =over =item C<=head1 I<Heading Text>> X<=head1> X<=head2> X<=head3> X<=head4> X<head1> X<head2> X<head3> X<head4> =item C<=head2 I<Heading Text>> =item C<=head3 I<Heading Text>> =item C<=head4 I<Heading Text>> Head1 through head4 produce headings, head1 being the highest level. The text in the rest of this paragraph is the content of the heading. For example: =head2 Object Attributes The text "Object Attributes" comprises the heading there. The text in these heading commands can use formatting codes, as seen here: =head2 Possible Values for C<$/> Such commands are explained in the "L<Formatting Codes|/"Formatting Codes">" section, below. =item C<=over I<indentlevel>> X<=over> X<=item> X<=back> X<over> X<item> X<back> =item C<=item I<stuff...>> =item C<=back> Item, over, and back require a little more explanation: "=over" starts a region specifically for the generation of a list using "=item" commands, or for indenting (groups of) normal paragraphs. At the end of your list, use "=back" to end it. The I<indentlevel> option to "=over" indicates how far over to indent, generally in ems (where one em is the width of an "M" in the document's base font) or roughly comparable units; if there is no I<indentlevel> option, it defaults to four. (And some formatters may just ignore whatever I<indentlevel> you provide.) In the I<stuff> in C<=item I<stuff...>>, you may use formatting codes, as seen here: =item Using C<$|> to Control Buffering Such commands are explained in the "L<Formatting Codes|/"Formatting Codes">" section, below. Note also that there are some basic rules to using "=over" ... "=back" regions: =over =item * Don't use "=item"s outside of an "=over" ... "=back" region. =item * The first thing after the "=over" command should be an "=item", unless there aren't going to be any items at all in this "=over" ... "=back" region. =item * Don't put "=headI<n>" commands inside an "=over" ... "=back" region. =item * And perhaps most importantly, keep the items consistent: either use "=item *" for all of them, to produce bullets; or use "=item 1.", "=item 2.", etc., to produce numbered lists; or use "=item foo", "=item bar", etc.--namely, things that look nothing like bullets or numbers. (If you have a list that contains both: 1) things that don't look like bullets nor numbers, plus 2) things that do, you should preface the bullet- or number-like items with C<ZE<lt>E<gt>>. See L<ZE<lt>E<gt>|/ZE<lt>E<gt> -- a null (zero-effect) formatting code> below for an example.) If you start with bullets or numbers, stick with them, as formatters use the first "=item" type to decide how to format the list. =back =item C<=cut> X<=cut> X<cut> To end a Pod block, use a blank line, then a line beginning with "=cut", and a blank line after it. This lets Perl (and the Pod formatter) know that this is where Perl code is resuming. (The blank line before the "=cut" is not technically necessary, but many older Pod processors require it.) =item C<=pod> X<=pod> X<pod> The "=pod" command by itself doesn't do much of anything, but it signals to Perl (and Pod formatters) that a Pod block starts here. A Pod block starts with I<any> command paragraph, so a "=pod" command is usually used just when you want to start a Pod block with an ordinary paragraph or a verbatim paragraph. For example: =item stuff() This function does stuff. =cut sub stuff { ... } =pod Remember to check its return value, as in: stuff() || die "Couldn't do stuff!"; =cut =item C<=begin I<formatname>> X<=begin> X<=end> X<=for> X<begin> X<end> X<for> =item C<=end I<formatname>> =item C<=for I<formatname> I<text...>> For, begin, and end will let you have regions of text/code/data that are not generally interpreted as normal Pod text, but are passed directly to particular formatters, or are otherwise special. A formatter that can use that format will use the region, otherwise it will be completely ignored. A command "=begin I<formatname>", some paragraphs, and a command "=end I<formatname>", mean that the text/data in between is meant for formatters that understand the special format called I<formatname>. For example, =begin html <hr> <img src="thang.png"> <p> This is a raw HTML paragraph </p> =end html The command "=for I<formatname> I<text...>" specifies that the remainder of just this paragraph (starting right after I<formatname>) is in that special format. =for html <hr> <img src="thang.png"> <p> This is a raw HTML paragraph </p> This means the same thing as the above "=begin html" ... "=end html" region. That is, with "=for", you can have only one paragraph's worth of text (i.e., the text in "=foo targetname text..."), but with "=begin targetname" ... "=end targetname", you can have any amount of stuff in between. (Note that there still must be a blank line after the "=begin" command and a blank line before the "=end" command.) Here are some examples of how to use these: =begin html <br>Figure 1.<br><IMG SRC="figure1.png"><br> =end html =begin text --------------- | foo | | bar | --------------- ^^^^ Figure 1. ^^^^ =end text Some format names that formatters currently are known to accept include "roff", "man", "latex", "tex", "text", and "html". (Some formatters will treat some of these as synonyms.) A format name of "comment" is common for just making notes (presumably to yourself) that won't appear in any formatted version of the Pod document: =for comment Make sure that all the available options are documented! Some I<formatnames> will require a leading colon (as in C<"=for :formatname">, or C<"=begin :formatname" ... "=end :formatname">), to signal that the text is not raw data, but instead I<is> Pod text (i.e., possibly containing formatting codes) that's just not for normal formatting (e.g., may not be a normal-use paragraph, but might be for formatting as a footnote). =item C<=encoding I<encodingname>> X<=encoding> X<encoding> This command is used for declaring the encoding of a document. Most users won't need this; but if your encoding isn't US-ASCII, then put a C<=encoding I<encodingname>> command very early in the document so that pod formatters will know how to decode the document. For I<encodingname>, use a name recognized by the L<Encode::Supported> module. Some pod formatters may try to guess between a Latin-1 or CP-1252 versus UTF-8 encoding, but they may guess wrong. It's best to be explicit if you use anything besides strict ASCII. Examples: =encoding latin1 =encoding utf8 =encoding koi8-r =encoding ShiftJIS =encoding big5 C<=encoding> affects the whole document, and must occur only once. =back And don't forget, all commands but C<=encoding> last up until the end of its I<paragraph>, not its line. So in the examples below, you can see that every command needs the blank line after it, to end its paragraph. (And some older Pod translators may require the C<=encoding> line to have a following blank line as well, even though it should be legal to omit.) Some examples of lists include: =over =item * First item =item * Second item =back =over =item Foo() Description of Foo function =item Bar() Description of Bar function =back =head2 Formatting Codes X<POD, formatting code> X<formatting code> X<POD, interior sequence> X<interior sequence> In ordinary paragraphs and in some command paragraphs, various formatting codes (a.k.a. "interior sequences") can be used: =for comment "interior sequences" is such an opaque term. Prefer "formatting codes" instead. =over =item C<IE<lt>textE<gt>> -- italic text X<I> X<< IZ<><> >> X<POD, formatting code, italic> X<italic> Used for emphasis ("C<be IE<lt>careful!E<gt>>") and parameters ("C<redo IE<lt>LABELE<gt>>") =item C<BE<lt>textE<gt>> -- bold text X<B> X<< BZ<><> >> X<POD, formatting code, bold> X<bold> Used for switches ("C<perl's BE<lt>-nE<gt> switch>"), programs ("C<some systems provide a BE<lt>chfnE<gt> for that>"), emphasis ("C<be BE<lt>careful!E<gt>>"), and so on ("C<and that feature is known as BE<lt>autovivificationE<gt>>"). =item C<CE<lt>codeE<gt>> -- code text X<C> X<< CZ<><> >> X<POD, formatting code, code> X<code> Renders code in a typewriter font, or gives some other indication that this represents program text ("C<CE<lt>gmtime($^T)E<gt>>") or some other form of computerese ("C<CE<lt>drwxr-xr-xE<gt>>"). =item C<LE<lt>nameE<gt>> -- a hyperlink X<L> X<< LZ<><> >> X<POD, formatting code, hyperlink> X<hyperlink> There are various syntaxes, listed below. In the syntaxes given, C<text>, C<name>, and C<section> cannot contain the characters '/' and '|'; and any '<' or '>' should be matched. =over =item * C<LE<lt>nameE<gt>> Link to a Perl manual page (e.g., C<LE<lt>Net::PingE<gt>>). Note that C<name> should not contain spaces. This syntax is also occasionally used for references to Unix man pages, as in C<LE<lt>crontab(5)E<gt>>. =item * C<LE<lt>name/"sec"E<gt>> or C<LE<lt>name/secE<gt>> Link to a section in other manual page. E.g., C<LE<lt>perlsyn/"For Loops"E<gt>> =item * C<LE<lt>/"sec"E<gt>> or C<LE<lt>/secE<gt>> Link to a section in this manual page. E.g., C<LE<lt>/"Object Methods"E<gt>> =back A section is started by the named heading or item. For example, C<LE<lt>perlvar/$.E<gt>> or C<LE<lt>perlvar/"$."E<gt>> both link to the section started by "C<=item $.>" in perlvar. And C<LE<lt>perlsyn/For LoopsE<gt>> or C<LE<lt>perlsyn/"For Loops"E<gt>> both link to the section started by "C<=head2 For Loops>" in perlsyn. To control what text is used for display, you use "C<LE<lt>text|...E<gt>>", as in: =over =item * C<LE<lt>text|nameE<gt>> Link this text to that manual page. E.g., C<LE<lt>Perl Error Messages|perldiagE<gt>> =item * C<LE<lt>text|name/"sec"E<gt>> or C<LE<lt>text|name/secE<gt>> Link this text to that section in that manual page. E.g., C<LE<lt>postfix "if"|perlsyn/"Statement Modifiers"E<gt>> =item * C<LE<lt>text|/"sec"E<gt>> or C<LE<lt>text|/secE<gt>> or C<LE<lt>text|"sec"E<gt>> Link this text to that section in this manual page. E.g., C<LE<lt>the various attributes|/"Member Data"E<gt>> =back Or you can link to a web page: =over =item * C<LE<lt>scheme:...E<gt>> C<LE<lt>text|scheme:...E<gt>> Links to an absolute URL. For example, C<LE<lt>http://www.perl.org/E<gt>> or C<LE<lt>The Perl Home Page|http://www.perl.org/E<gt>>. =back =item C<EE<lt>escapeE<gt>> -- a character escape X<E> X<< EZ<><> >> X<POD, formatting code, escape> X<escape> Very similar to HTML/XML C<&I<foo>;> "entity references": =over =item * C<EE<lt>ltE<gt>> -- a literal E<lt> (less than) =item * C<EE<lt>gtE<gt>> -- a literal E<gt> (greater than) =item * C<EE<lt>verbarE<gt>> -- a literal | (I<ver>tical I<bar>) =item * C<EE<lt>solE<gt>> -- a literal / (I<sol>idus) The above four are optional except in other formatting codes, notably C<LE<lt>...E<gt>>, and when preceded by a capital letter. =item * C<EE<lt>htmlnameE<gt>> Some non-numeric HTML entity name, such as C<EE<lt>eacuteE<gt>>, meaning the same thing as C<é> in HTML -- i.e., a lowercase e with an acute (/-shaped) accent. =item * C<EE<lt>numberE<gt>> The ASCII/Latin-1/Unicode character with that number. A leading "0x" means that I<number> is hex, as in C<EE<lt>0x201EE<gt>>. A leading "0" means that I<number> is octal, as in C<EE<lt>075E<gt>>. Otherwise I<number> is interpreted as being in decimal, as in C<EE<lt>181E<gt>>. Note that older Pod formatters might not recognize octal or hex numeric escapes, and that many formatters cannot reliably render characters above 255. (Some formatters may even have to use compromised renderings of Latin-1/CP-1252 characters, like rendering C<EE<lt>eacuteE<gt>> as just a plain "e".) =back =item C<FE<lt>filenameE<gt>> -- used for filenames X<F> X<< FZ<><> >> X<POD, formatting code, filename> X<filename> Typically displayed in italics. Example: "C<FE<lt>.cshrcE<gt>>" =item C<SE<lt>textE<gt>> -- text contains non-breaking spaces X<S> X<< SZ<><> >> X<POD, formatting code, non-breaking space> X<non-breaking space> This means that the words in I<text> should not be broken across lines. Example: S<C<SE<lt>$x ? $y : $zE<gt>>>. =item C<XE<lt>topic nameE<gt>> -- an index entry X<X> X<< XZ<><> >> X<POD, formatting code, index entry> X<index entry> This is ignored by most formatters, but some may use it for building indexes. It always renders as empty-string. Example: C<XE<lt>absolutizing relative URLsE<gt>> =item C<ZE<lt>E<gt>> -- a null (zero-effect) formatting code X<Z> X<< ZZ<><> >> X<POD, formatting code, null> X<null> This is rarely used. It's one way to get around using an EE<lt>...E<gt> code sometimes. For example, instead of "C<NEE<lt>ltE<gt>3>" (for "NE<lt>3") you could write "C<NZE<lt>E<gt>E<lt>3>" (the "ZE<lt>E<gt>" breaks up the "N" and the "E<lt>" so they can't be considered the part of a (fictitious) "NE<lt>...E<gt>" code). Another use is to indicate that I<stuff> in C<=item ZE<lt>E<gt>I<stuff...>> is not to be considered to be a bullet or number. For example, without the C<ZE<lt>E<gt>>, the line =item Z<>500 Server error could possibly be parsed as an item in a numbered list when it isn't meant to be. Still another use is to maintain visual space between C<=item> lines. If you specify =item foo =item bar it will typically get rendered as foo bar That may be what you want, but if what you really want is foo bar you can use C<ZE<lt>E<gt>> to accomplish that =item foo Z<> =item bar =for comment This was formerly explained as a "zero-width character". But it in most parser models, it parses to nothing at all, as opposed to parsing as if it were a E<zwnj> or E<zwj>, which are REAL zero-width characters. So "width" and "character" are exactly the wrong words. =back Most of the time, you will need only a single set of angle brackets to delimit the beginning and end of formatting codes. However, sometimes you will want to put a real right angle bracket (a greater-than sign, '>') inside of a formatting code. This is particularly common when using a formatting code to provide a different font-type for a snippet of code. As with all things in Perl, there is more than one way to do it. One way is to simply escape the closing bracket using an C<E> code: C<$a E<lt>=E<gt> $b> This will produce: "C<$a E<lt>=E<gt> $b>" A more readable, and perhaps more "plain" way is to use an alternate set of delimiters that doesn't require a single ">" to be escaped. Doubled angle brackets ("<<" and ">>") may be used I<if and only if there is whitespace right after the opening delimiter and whitespace right before the closing delimiter!> For example, the following will do the trick: X<POD, formatting code, escaping with multiple brackets> C<< $a <=> $b >> In fact, you can use as many repeated angle-brackets as you like so long as you have the same number of them in the opening and closing delimiters, and make sure that whitespace immediately follows the last '<' of the opening delimiter, and immediately precedes the first '>' of the closing delimiter. (The whitespace is ignored.) So the following will also work: X<POD, formatting code, escaping with multiple brackets> C<<< $a <=> $b >>> C<<<< $a <=> $b >>>> And they all mean exactly the same as this: C<$a E<lt>=E<gt> $b> The multiple-bracket form does not affect the interpretation of the contents of the formatting code, only how it must end. That means that the examples above are also exactly the same as this: C<< $a E<lt>=E<gt> $b >> As a further example, this means that if you wanted to put these bits of code in C<C> (code) style: open(X, ">>thing.dat") || die $! $foo->bar(); you could do it like so: C<<< open(X, ">>thing.dat") || die $! >>> C<< $foo->bar(); >> which is presumably easier to read than the old way: C<open(X, "E<gt>E<gt>thing.dat") || die $!> C<$foo-E<gt>bar();> This is currently supported by pod2text (Pod::Text), pod2man (Pod::Man), and any other pod2xxx or Pod::Xxxx translators that use Pod::Parser 1.093 or later, or Pod::Tree 1.02 or later. =head2 The Intent X<POD, intent of> The intent is simplicity of use, not power of expression. Paragraphs look like paragraphs (block format), so that they stand out visually, and so that I could run them through C<fmt> easily to reformat them (that's F7 in my version of B<vi>, or Esc Q in my version of B<emacs>). I wanted the translator to always leave the C<'> and C<`> and C<"> quotes alone, in verbatim mode, so I could slurp in a working program, shift it over four spaces, and have it print out, er, verbatim. And presumably in a monospace font. The Pod format is not necessarily sufficient for writing a book. Pod is just meant to be an idiot-proof common source for nroff, HTML, TeX, and other markup languages, as used for online documentation. Translators exist for B<pod2text>, B<pod2html>, B<pod2man> (that's for nroff(1) and troff(1)), B<pod2latex>, and B<pod2fm>. Various others are available in CPAN. =head2 Embedding Pods in Perl Modules X<POD, embedding> You can embed Pod documentation in your Perl modules and scripts. Start your documentation with an empty line, a "=head1" command at the beginning, and end it with a "=cut" command and an empty line. The B<perl> executable will ignore the Pod text. You can place a Pod statement where B<perl> expects the beginning of a new statement, but not within a statement, as that would result in an error. See any of the supplied library modules for examples. If you're going to put your Pod at the end of the file, and you're using an C<__END__> or C<__DATA__> cut mark, make sure to put an empty line there before the first Pod command. __END__ =head1 NAME Time::Local - efficiently compute time from local and GMT time Without that empty line before the "=head1", many translators wouldn't have recognized the "=head1" as starting a Pod block. =head2 Hints for Writing Pod =over =item * X<podchecker> X<POD, validating> The B<podchecker> command is provided for checking Pod syntax for errors and warnings. For example, it checks for completely blank lines in Pod blocks and for unknown commands and formatting codes. You should still also pass your document through one or more translators and proofread the result, or print out the result and proofread that. Some of the problems found may be bugs in the translators, which you may or may not wish to work around. =item * If you're more familiar with writing in HTML than with writing in Pod, you can try your hand at writing documentation in simple HTML, and converting it to Pod with the experimental L<Pod::HTML2Pod|Pod::HTML2Pod> module, (available in CPAN), and looking at the resulting code. The experimental L<Pod::PXML|Pod::PXML> module in CPAN might also be useful. =item * Many older Pod translators require the lines before every Pod command and after every Pod command (including "=cut"!) to be a blank line. Having something like this: # - - - - - - - - - - - - =item $firecracker->boom() This noisily detonates the firecracker object. =cut sub boom { ... ...will make such Pod translators completely fail to see the Pod block at all. Instead, have it like this: # - - - - - - - - - - - - =item $firecracker->boom() This noisily detonates the firecracker object. =cut sub boom { ... =item * Some older Pod translators require paragraphs (including command paragraphs like "=head2 Functions") to be separated by I<completely> empty lines. If you have an apparently empty line with some spaces on it, this might not count as a separator for those translators, and that could cause odd formatting. =item * Older translators might add wording around an LE<lt>E<gt> link, so that C<LE<lt>Foo::BarE<gt>> may become "the Foo::Bar manpage", for example. So you shouldn't write things like C<the LE<lt>fooE<gt> documentation>, if you want the translated document to read sensibly. Instead, write C<the LE<lt>Foo::Bar|Foo::BarE<gt> documentation> or C<LE<lt>the Foo::Bar documentation|Foo::BarE<gt>>, to control how the link comes out. =item * Going past the 70th column in a verbatim block might be ungracefully wrapped by some formatters. =back =head1 SEE ALSO L<perlpodspec>, L<perlsyn/"PODs: Embedded Documentation">, L<perlnewmod>, L<perldoc>, L<pod2html>, L<pod2man>, L<podchecker>. =head1 AUTHOR Larry Wall, Sean M. Burke =cut perl5282delta.pod 0000644 00000014070 15125556335 0007561 0 ustar 00 =encoding utf8 =head1 NAME perl5282delta - what is new for perl v5.28.2 =head1 DESCRIPTION This document describes differences between the 5.28.1 release and the 5.28.2 release. If you are upgrading from an earlier release such as 5.28.0, first read L<perl5281delta>, which describes differences between 5.28.0 and 5.28.1. =head1 Incompatible Changes =head2 Any set of digits in the Common script are legal in a script run of another script There are several sets of digits in the Common script. C<[0-9]> is the most familiar. But there are also C<[\x{FF10}-\x{FF19}]> (FULLWIDTH DIGIT ZERO - FULLWIDTH DIGIT NINE), and several sets for use in mathematical notation, such as the MATHEMATICAL DOUBLE-STRUCK DIGITs. Any of these sets should be able to appear in script runs of, say, Greek. But the previous design overlooked all but the ASCII digits C<[0-9]>, so the design was flawed. This has been fixed, so is both a bug fix and an incompatibility. All digits in a run still have to come from the same set of ten digits. L<[perl #133547]|https://rt.perl.org/Ticket/Display.html?id=133547> =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Module::CoreList> has been upgraded from version 5.20181129_28 to 5.20190419. =item * L<PerlIO::scalar> has been upgraded from version 0.29 to 0.30. =item * L<Storable> has been upgraded from version 3.08 to 3.08_01. =back =head1 Platform Support =head2 Platform-Specific Notes =over 4 =item Windows The Windows Server 2003 SP1 Platform SDK build, with its early x64 compiler and tools, was accidentally broken in Perl 5.27.9. This has now been fixed. =item Mac OS X Perl's build and testing process on Mac OS X for C<-Duseshrplib> builds is now compatible with Mac OS X System Integrity Protection (SIP). SIP prevents binaries in F</bin> (and a few other places) being passed the C<DYLD_LIBRARY_PATH> environment variable. For our purposes this prevents C<DYLD_LIBRARY_PATH> from being passed to the shell, which prevents that variable being passed to the testing or build process, so running C<perl> couldn't find F<libperl.dylib>. To work around that, the initial build of the F<perl> executable expects to find F<libperl.dylib> in the build directory, and the library path is then adjusted during installation to point to the installed library. L<[perl #126706]|https://rt.perl.org/Ticket/Display.html?id=126706> =back =head1 Selected Bug Fixes =over 4 =item * If an in-place edit is still in progress during global destruction and the process exit code (as stored in C<$?>) is zero, perl will now treat the in-place edit as successful, replacing the input file with any output produced. This allows code like: perl -i -ne 'print "Foo"; last' to replace the input file, while code like: perl -i -ne 'print "Foo"; die' will not. Partly resolves [perl #133659]. L<[perl #133659]|https://rt.perl.org/Ticket/Display.html?id=133659> =item * A regression in Perl 5.28 caused the following code to fail close(STDIN); open(CHILD, "|wc -l")' because the child's stdin would be closed on exec. This has now been fixed. =item * C<pack "u", "invalid uuencoding"> now properly NUL terminates the zero-length SV produced. L<[perl #132655]|https://rt.perl.org/Ticket/Display.html?id=132655> =item * Failing to compile a format now aborts compilation. Like other errors in sub-parses this could leave the parser in a strange state, possibly crashing perl if compilation continued. L<[perl #132158]|https://rt.perl.org/Ticket/Display.html?id=132158> =item * See L</Any set of digits in the Common script are legal in a script run of another script>. =back =head1 Acknowledgements Perl 5.28.2 represents approximately 4 months of development since Perl 5.28.1 and contains approximately 2,500 lines of changes across 75 files from 13 authors. Excluding auto-generated files, documentation and release tools, there were approximately 1,200 lines of changes to 29 .pm, .t, .c and .h files. Perl continues to flourish into its fourth decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.28.2: Aaron Crane, Abigail, Andy Dougherty, David Mitchell, Karen Etheridge, Karl Williamson, Leon Timmermans, Nicolas R., Sawyer X, Steve Hay, Tina Müller, Tony Cook, Zak B. Elep. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the perl bug database at L<https://rt.perl.org/> . There may also be information at L<http://www.perl.org/> , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications which make it inappropriate to send to a publicly archived mailing list, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 Give Thanks If you wish to thank the Perl 5 Porters for the work we had done in Perl 5, you can do so by running the C<perlthanks> program: perlthanks This will send an email to the Perl 5 Porters list with your show of thanks. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl5005delta.pod 0000644 00000102753 15125556335 0007560 0 ustar 00 =head1 NAME perl5005delta - what's new for perl5.005 =head1 DESCRIPTION This document describes differences between the 5.004 release and this one. =head1 About the new versioning system Perl is now developed on two tracks: a maintenance track that makes small, safe updates to released production versions with emphasis on compatibility; and a development track that pursues more aggressive evolution. Maintenance releases (which should be considered production quality) have subversion numbers that run from C<1> to C<49>, and development releases (which should be considered "alpha" quality) run from C<50> to C<99>. Perl 5.005 is the combined product of the new dual-track development scheme. =head1 Incompatible Changes =head2 WARNING: This version is not binary compatible with Perl 5.004. Starting with Perl 5.004_50 there were many deep and far-reaching changes to the language internals. If you have dynamically loaded extensions that you built under perl 5.003 or 5.004, you can continue to use them with 5.004, but you will need to rebuild and reinstall those extensions to use them 5.005. See F<INSTALL> for detailed instructions on how to upgrade. =head2 Default installation structure has changed The new Configure defaults are designed to allow a smooth upgrade from 5.004 to 5.005, but you should read F<INSTALL> for a detailed discussion of the changes in order to adapt them to your system. =head2 Perl Source Compatibility When none of the experimental features are enabled, there should be very few user-visible Perl source compatibility issues. If threads are enabled, then some caveats apply. C<@_> and C<$_> become lexical variables. The effect of this should be largely transparent to the user, but there are some boundary conditions under which user will need to be aware of the issues. For example, C<local(@_)> results in a "Can't localize lexical variable @_ ..." message. This may be enabled in a future version. Some new keywords have been introduced. These are generally expected to have very little impact on compatibility. See L<New C<INIT> keyword>, L<New C<lock> keyword>, and L<New C<qrE<sol>E<sol>> operator>. Certain barewords are now reserved. Use of these will provoke a warning if you have asked for them with the C<-w> switch. See L<C<our> is now a reserved word>. =head2 C Source Compatibility There have been a large number of changes in the internals to support the new features in this release. =over 4 =item * Core sources now require ANSI C compiler An ANSI C compiler is now B<required> to build perl. See F<INSTALL>. =item * All Perl global variables must now be referenced with an explicit prefix All Perl global variables that are visible for use by extensions now have a C<PL_> prefix. New extensions should C<not> refer to perl globals by their unqualified names. To preserve sanity, we provide limited backward compatibility for globals that are being widely used like C<sv_undef> and C<na> (which should now be written as C<PL_sv_undef>, C<PL_na> etc.) If you find that your XS extension does not compile anymore because a perl global is not visible, try adding a C<PL_> prefix to the global and rebuild. It is strongly recommended that all functions in the Perl API that don't begin with C<perl> be referenced with a C<Perl_> prefix. The bare function names without the C<Perl_> prefix are supported with macros, but this support may cease in a future release. See L<perlapi>. =item * Enabling threads has source compatibility issues Perl built with threading enabled requires extensions to use the new C<dTHR> macro to initialize the handle to access per-thread data. If you see a compiler error that talks about the variable C<thr> not being declared (when building a module that has XS code), you need to add C<dTHR;> at the beginning of the block that elicited the error. The API function C<perl_get_sv("@",GV_ADD)> should be used instead of directly accessing perl globals as C<GvSV(errgv)>. The API call is backward compatible with existing perls and provides source compatibility with threading is enabled. See L</"C Source Compatibility"> for more information. =back =head2 Binary Compatibility This version is NOT binary compatible with older versions. All extensions will need to be recompiled. Further binaries built with threads enabled are incompatible with binaries built without. This should largely be transparent to the user, as all binary incompatible configurations have their own unique architecture name, and extension binaries get installed at unique locations. This allows coexistence of several configurations in the same directory hierarchy. See F<INSTALL>. =head2 Security fixes may affect compatibility A few taint leaks and taint omissions have been corrected. This may lead to "failure" of scripts that used to work with older versions. Compiling with -DINCOMPLETE_TAINTS provides a perl with minimal amounts of changes to the tainting behavior. But note that the resulting perl will have known insecurities. Oneliners with the C<-e> switch do not create temporary files anymore. =head2 Relaxed new mandatory warnings introduced in 5.004 Many new warnings that were introduced in 5.004 have been made optional. Some of these warnings are still present, but perl's new features make them less often a problem. See L</New Diagnostics>. =head2 Licensing Perl has a new Social Contract for contributors. See F<Porting/Contract>. The license included in much of the Perl documentation has changed. Most of the Perl documentation was previously under the implicit GNU General Public License or the Artistic License (at the user's choice). Now much of the documentation unambiguously states the terms under which it may be distributed. Those terms are in general much less restrictive than the GNU GPL. See L<perl> and the individual perl manpages listed therein. =head1 Core Changes =head2 Threads WARNING: Threading is considered an B<experimental> feature. Details of the implementation may change without notice. There are known limitations and some bugs. These are expected to be fixed in future versions. See F<README.threads>. =head2 Compiler WARNING: The Compiler and related tools are considered B<experimental>. Features may change without notice, and there are known limitations and bugs. Since the compiler is fully external to perl, the default configuration will build and install it. The Compiler produces three different types of transformations of a perl program. The C backend generates C code that captures perl's state just before execution begins. It eliminates the compile-time overheads of the regular perl interpreter, but the run-time performance remains comparatively the same. The CC backend generates optimized C code equivalent to the code path at run-time. The CC backend has greater potential for big optimizations, but only a few optimizations are implemented currently. The Bytecode backend generates a platform independent bytecode representation of the interpreter's state just before execution. Thus, the Bytecode back end also eliminates much of the compilation overhead of the interpreter. The compiler comes with several valuable utilities. C<B::Lint> is an experimental module to detect and warn about suspicious code, especially the cases that the C<-w> switch does not detect. C<B::Deparse> can be used to demystify perl code, and understand how perl optimizes certain constructs. C<B::Xref> generates cross reference reports of all definition and use of variables, subroutines and formats in a program. C<B::Showlex> show the lexical variables used by a subroutine or file at a glance. C<perlcc> is a simple frontend for compiling perl. See C<ext/B/README>, L<B>, and the respective compiler modules. =head2 Regular Expressions Perl's regular expression engine has been seriously overhauled, and many new constructs are supported. Several bugs have been fixed. Here is an itemized summary: =over 4 =item Many new and improved optimizations Changes in the RE engine: Unneeded nodes removed; Substrings merged together; New types of nodes to process (SUBEXPR)* and similar expressions quickly, used if the SUBEXPR has no side effects and matches strings of the same length; Better optimizations by lookup for constant substrings; Better search for constants substrings anchored by $ ; Changes in Perl code using RE engine: More optimizations to s/longer/short/; study() was not working; /blah/ may be optimized to an analogue of index() if $& $` $' not seen; Unneeded copying of matched-against string removed; Only matched part of the string is copying if $` $' were not seen; =item Many bug fixes Note that only the major bug fixes are listed here. See F<Changes> for others. Backtracking might not restore start of $3. No feedback if max count for * or + on "complex" subexpression was reached, similarly (but at compile time) for {3,34567} Primitive restrictions on max count introduced to decrease a possibility of a segfault; (ZERO-LENGTH)* could segfault; (ZERO-LENGTH)* was prohibited; Long REs were not allowed; /RE/g could skip matches at the same position after a zero-length match; =item New regular expression constructs The following new syntax elements are supported: (?<=RE) (?<!RE) (?{ CODE }) (?i-x) (?i:RE) (?(COND)YES_RE|NO_RE) (?>RE) \z =item New operator for precompiled regular expressions See L<New C<qrE<sol>E<sol>> operator>. =item Other improvements Better debugging output (possibly with colors), even from non-debugging Perl; RE engine code now looks like C, not like assembler; Behaviour of RE modifiable by `use re' directive; Improved documentation; Test suite significantly extended; Syntax [:^upper:] etc., reserved inside character classes; =item Incompatible changes (?i) localized inside enclosing group; $( is not interpolated into RE any more; /RE/g may match at the same position (with non-zero length) after a zero-length match (bug fix). =back See L<perlre> and L<perlop>. =head2 Improved malloc() See banner at the beginning of C<malloc.c> for details. =head2 Quicksort is internally implemented Perl now contains its own highly optimized qsort() routine. The new qsort() is resistant to inconsistent comparison functions, so Perl's C<sort()> will not provoke coredumps any more when given poorly written sort subroutines. (Some C library C<qsort()>s that were being used before used to have this problem.) In our testing, the new C<qsort()> required the minimal number of pair-wise compares on average, among all known C<qsort()> implementations. See C<perlfunc/sort>. =head2 Reliable signals Perl's signal handling is susceptible to random crashes, because signals arrive asynchronously, and the Perl runtime is not reentrant at arbitrary times. However, one experimental implementation of reliable signals is available when threads are enabled. See C<Thread::Signal>. Also see F<INSTALL> for how to build a Perl capable of threads. =head2 Reliable stack pointers The internals now reallocate the perl stack only at predictable times. In particular, magic calls never trigger reallocations of the stack, because all reentrancy of the runtime is handled using a "stack of stacks". This should improve reliability of cached stack pointers in the internals and in XSUBs. =head2 More generous treatment of carriage returns Perl used to complain if it encountered literal carriage returns in scripts. Now they are mostly treated like whitespace within program text. Inside string literals and here documents, literal carriage returns are ignored if they occur paired with linefeeds, or get interpreted as whitespace if they stand alone. This behavior means that literal carriage returns in files should be avoided. You can get the older, more compatible (but less generous) behavior by defining the preprocessor symbol C<PERL_STRICT_CR> when building perl. Of course, all this has nothing whatever to do with how escapes like C<\r> are handled within strings. Note that this doesn't somehow magically allow you to keep all text files in DOS format. The generous treatment only applies to files that perl itself parses. If your C compiler doesn't allow carriage returns in files, you may still be unable to build modules that need a C compiler. =head2 Memory leaks C<substr>, C<pos> and C<vec> don't leak memory anymore when used in lvalue context. Many small leaks that impacted applications that embed multiple interpreters have been fixed. =head2 Better support for multiple interpreters The build-time option C<-DMULTIPLICITY> has had many of the details reworked. Some previously global variables that should have been per-interpreter now are. With care, this allows interpreters to call each other. See the C<PerlInterp> extension on CPAN. =head2 Behavior of local() on array and hash elements is now well-defined See L<perlsub/"Temporary Values via local()">. =head2 C<%!> is transparently tied to the L<Errno> module See L<perlvar>, and L<Errno>. =head2 Pseudo-hashes are supported See L<perlref>. =head2 C<EXPR foreach EXPR> is supported See L<perlsyn>. =head2 Keywords can be globally overridden See L<perlsub>. =head2 C<$^E> is meaningful on Win32 See L<perlvar>. =head2 C<foreach (1..1000000)> optimized C<foreach (1..1000000)> is now optimized into a counting loop. It does not try to allocate a 1000000-size list anymore. =head2 C<Foo::> can be used as implicitly quoted package name Barewords caused unintuitive behavior when a subroutine with the same name as a package happened to be defined. Thus, C<new Foo @args>, use the result of the call to C<Foo()> instead of C<Foo> being treated as a literal. The recommended way to write barewords in the indirect object slot is C<new Foo:: @args>. Note that the method C<new()> is called with a first argument of C<Foo>, not C<Foo::> when you do that. =head2 C<exists $Foo::{Bar::}> tests existence of a package It was impossible to test for the existence of a package without actually creating it before. Now C<exists $Foo::{Bar::}> can be used to test if the C<Foo::Bar> namespace has been created. =head2 Better locale support See L<perllocale>. =head2 Experimental support for 64-bit platforms Perl5 has always had 64-bit support on systems with 64-bit longs. Starting with 5.005, the beginnings of experimental support for systems with 32-bit long and 64-bit 'long long' integers has been added. If you add -DUSE_LONG_LONG to your ccflags in config.sh (or manually define it in perl.h) then perl will be built with 'long long' support. There will be many compiler warnings, and the resultant perl may not work on all systems. There are many other issues related to third-party extensions and libraries. This option exists to allow people to work on those issues. =head2 prototype() returns useful results on builtins See L<perlfunc/prototype>. =head2 Extended support for exception handling C<die()> now accepts a reference value, and C<$@> gets set to that value in exception traps. This makes it possible to propagate exception objects. This is an undocumented B<experimental> feature. =head2 Re-blessing in DESTROY() supported for chaining DESTROY() methods See L<perlobj/Destructors>. =head2 All C<printf> format conversions are handled internally See L<perlfunc/printf>. =head2 New C<INIT> keyword C<INIT> subs are like C<BEGIN> and C<END>, but they get run just before the perl runtime begins execution. e.g., the Perl Compiler makes use of C<INIT> blocks to initialize and resolve pointers to XSUBs. =head2 New C<lock> keyword The C<lock> keyword is the fundamental synchronization primitive in threaded perl. When threads are not enabled, it is currently a noop. To minimize impact on source compatibility this keyword is "weak", i.e., any user-defined subroutine of the same name overrides it, unless a C<use Thread> has been seen. =head2 New C<qr//> operator The C<qr//> operator, which is syntactically similar to the other quote-like operators, is used to create precompiled regular expressions. This compiled form can now be explicitly passed around in variables, and interpolated in other regular expressions. See L<perlop>. =head2 C<our> is now a reserved word Calling a subroutine with the name C<our> will now provoke a warning when using the C<-w> switch. =head2 Tied arrays are now fully supported See L<Tie::Array>. =head2 Tied handles support is better Several missing hooks have been added. There is also a new base class for TIEARRAY implementations. See L<Tie::Array>. =head2 4th argument to substr substr() can now both return and replace in one operation. The optional 4th argument is the replacement string. See L<perlfunc/substr>. =head2 Negative LENGTH argument to splice splice() with a negative LENGTH argument now work similar to what the LENGTH did for substr(). Previously a negative LENGTH was treated as 0. See L<perlfunc/splice>. =head2 Magic lvalues are now more magical When you say something like C<substr($x, 5) = "hi">, the scalar returned by substr() is special, in that any modifications to it affect $x. (This is called a 'magic lvalue' because an 'lvalue' is something on the left side of an assignment.) Normally, this is exactly what you would expect to happen, but Perl uses the same magic if you use substr(), pos(), or vec() in a context where they might be modified, like taking a reference with C<\> or as an argument to a sub that modifies C<@_>. In previous versions, this 'magic' only went one way, but now changes to the scalar the magic refers to ($x in the above example) affect the magic lvalue too. For instance, this code now acts differently: $x = "hello"; sub printit { $x = "g'bye"; print $_[0], "\n"; } printit(substr($x, 0, 5)); In previous versions, this would print "hello", but it now prints "g'bye". =head2 <> now reads in records If C<$/> is a reference to an integer, or a scalar that holds an integer, <> will read in records instead of lines. For more info, see L<perlvar/$E<sol>>. =head1 Supported Platforms Configure has many incremental improvements. Site-wide policy for building perl can now be made persistent, via Policy.sh. Configure also records the command-line arguments used in F<config.sh>. =head2 New Platforms BeOS is now supported. See F<README.beos>. DOS is now supported under the DJGPP tools. See F<README.dos> (installed as L<perldos> on some systems). MiNT is now supported. See F<README.mint>. MPE/iX is now supported. See README.mpeix. MVS (aka OS390, aka Open Edition) is now supported. See F<README.os390> (installed as L<perlos390> on some systems). Stratus VOS is now supported. See F<README.vos>. =head2 Changes in existing support Win32 support has been vastly enhanced. Support for Perl Object, a C++ encapsulation of Perl. GCC and EGCS are now supported on Win32. See F<README.win32>, aka L<perlwin32>. VMS configuration system has been rewritten. See F<README.vms> (installed as F<README_vms> on some systems). The hints files for most Unix platforms have seen incremental improvements. =head1 Modules and Pragmata =head2 New Modules =over 4 =item B Perl compiler and tools. See L<B>. =item Data::Dumper A module to pretty print Perl data. See L<Data::Dumper>. =item Dumpvalue A module to dump perl values to the screen. See L<Dumpvalue>. =item Errno A module to look up errors more conveniently. See L<Errno>. =item File::Spec A portable API for file operations. =item ExtUtils::Installed Query and manage installed modules. =item ExtUtils::Packlist Manipulate .packlist files. =item Fatal Make functions/builtins succeed or die. =item IPC::SysV Constants and other support infrastructure for System V IPC operations in perl. =item Test A framework for writing test suites. =item Tie::Array Base class for tied arrays. =item Tie::Handle Base class for tied handles. =item Thread Perl thread creation, manipulation, and support. =item attrs Set subroutine attributes. =item fields Compile-time class fields. =item re Various pragmata to control behavior of regular expressions. =back =head2 Changes in existing modules =over 4 =item Benchmark You can now run tests for I<x> seconds instead of guessing the right number of tests to run. Keeps better time. =item Carp Carp has a new function cluck(). cluck() warns, like carp(), but also adds a stack backtrace to the error message, like confess(). =item CGI CGI has been updated to version 2.42. =item Fcntl More Fcntl constants added: F_SETLK64, F_SETLKW64, O_LARGEFILE for large (more than 4G) file access (the 64-bit support is not yet working, though, so no need to get overly excited), Free/Net/OpenBSD locking behaviour flags F_FLOCK, F_POSIX, Linux F_SHLCK, and O_ACCMODE: the mask of O_RDONLY, O_WRONLY, and O_RDWR. =item Math::Complex The accessors methods Re, Im, arg, abs, rho, theta, methods can ($z->Re()) now also act as mutators ($z->Re(3)). =item Math::Trig A little bit of radial trigonometry (cylindrical and spherical) added, for example the great circle distance. =item POSIX POSIX now has its own platform-specific hints files. =item DB_File DB_File supports version 2.x of Berkeley DB. See C<ext/DB_File/Changes>. =item MakeMaker MakeMaker now supports writing empty makefiles, provides a way to specify that site umask() policy should be honored. There is also better support for manipulation of .packlist files, and getting information about installed modules. Extensions that have both architecture-dependent and architecture-independent files are now always installed completely in the architecture-dependent locations. Previously, the shareable parts were shared both across architectures and across perl versions and were therefore liable to be overwritten with newer versions that might have subtle incompatibilities. =item CPAN See L<perlmodinstall> and L<CPAN>. =item Cwd Cwd::cwd is faster on most platforms. =back =head1 Utility Changes C<h2ph> and related utilities have been vastly overhauled. C<perlcc>, a new experimental front end for the compiler is available. The crude GNU C<configure> emulator is now called C<configure.gnu> to avoid trampling on C<Configure> under case-insensitive filesystems. C<perldoc> used to be rather slow. The slower features are now optional. In particular, case-insensitive searches need the C<-i> switch, and recursive searches need C<-r>. You can set these switches in the C<PERLDOC> environment variable to get the old behavior. =head1 Documentation Changes Config.pm now has a glossary of variables. F<Porting/patching.pod> has detailed instructions on how to create and submit patches for perl. L<perlport> specifies guidelines on how to write portably. L<perlmodinstall> describes how to fetch and install modules from C<CPAN> sites. Some more Perl traps are documented now. See L<perltrap>. L<perlopentut> gives a tutorial on using open(). L<perlreftut> gives a tutorial on references. L<perlthrtut> gives a tutorial on threads. =head1 New Diagnostics =over 4 =item Ambiguous call resolved as CORE::%s(), qualify as such or use & (W) A subroutine you have declared has the same name as a Perl keyword, and you have used the name without qualification for calling one or the other. Perl decided to call the builtin because the subroutine is not imported. To force interpretation as a subroutine call, either put an ampersand before the subroutine name, or qualify the name with its package. Alternatively, you can import the subroutine (or pretend that it's imported with the C<use subs> pragma). To silently interpret it as the Perl operator, use the C<CORE::> prefix on the operator (e.g. C<CORE::log($x)>) or by declaring the subroutine to be an object method (see L</attrs>). =item Bad index while coercing array into hash (F) The index looked up in the hash found as the 0'th element of a pseudo-hash is not legal. Index values must be at 1 or greater. See L<perlref>. =item Bareword "%s" refers to nonexistent package (W) You used a qualified bareword of the form C<Foo::>, but the compiler saw no other uses of that namespace before that point. Perhaps you need to predeclare a package? =item Can't call method "%s" on an undefined value (F) You used the syntax of a method call, but the slot filled by the object reference or package name contains an undefined value. Something like this will reproduce the error: $BADREF = 42; process $BADREF 1,2,3; $BADREF->process(1,2,3); =item Can't check filesystem of script "%s" for nosuid (P) For some reason you can't check the filesystem of the script for nosuid. =item Can't coerce array into hash (F) You used an array where a hash was expected, but the array has no information on how to map from keys to array indices. You can do that only with arrays that have a hash reference at index 0. =item Can't goto subroutine from an eval-string (F) The "goto subroutine" call can't be used to jump out of an eval "string". (You can use it to jump out of an eval {BLOCK}, but you probably don't want to.) =item Can't localize pseudo-hash element (F) You said something like C<< local $ar->{'key'} >>, where $ar is a reference to a pseudo-hash. That hasn't been implemented yet, but you can get a similar effect by localizing the corresponding array element directly: C<< local $ar->[$ar->[0]{'key'}] >>. =item Can't use %%! because Errno.pm is not available (F) The first time the %! hash is used, perl automatically loads the Errno.pm module. The Errno module is expected to tie the %! hash to provide symbolic names for C<$!> errno values. =item Cannot find an opnumber for "%s" (F) A string of a form C<CORE::word> was given to prototype(), but there is no builtin with the name C<word>. =item Character class syntax [. .] is reserved for future extensions (W) Within regular expression character classes ([]) the syntax beginning with "[." and ending with ".]" is reserved for future extensions. If you need to represent those character sequences inside a regular expression character class, just quote the square brackets with the backslash: "\[." and ".\]". =item Character class syntax [: :] is reserved for future extensions (W) Within regular expression character classes ([]) the syntax beginning with "[:" and ending with ":]" is reserved for future extensions. If you need to represent those character sequences inside a regular expression character class, just quote the square brackets with the backslash: "\[:" and ":\]". =item Character class syntax [= =] is reserved for future extensions (W) Within regular expression character classes ([]) the syntax beginning with "[=" and ending with "=]" is reserved for future extensions. If you need to represent those character sequences inside a regular expression character class, just quote the square brackets with the backslash: "\[=" and "=\]". =item %s: Eval-group in insecure regular expression (F) Perl detected tainted data when trying to compile a regular expression that contains the C<(?{ ... })> zero-width assertion, which is unsafe. See L<perlre/(?{ code })>, and L<perlsec>. =item %s: Eval-group not allowed, use re 'eval' (F) A regular expression contained the C<(?{ ... })> zero-width assertion, but that construct is only allowed when the C<use re 'eval'> pragma is in effect. See L<perlre/(?{ code })>. =item %s: Eval-group not allowed at run time (F) Perl tried to compile a regular expression containing the C<(?{ ... })> zero-width assertion at run time, as it would when the pattern contains interpolated values. Since that is a security risk, it is not allowed. If you insist, you may still do this by explicitly building the pattern from an interpolated string at run time and using that in an eval(). See L<perlre/(?{ code })>. =item Explicit blessing to '' (assuming package main) (W) You are blessing a reference to a zero length string. This has the effect of blessing the reference into the package main. This is usually not what you want. Consider providing a default target package, e.g. bless($ref, $p || 'MyPackage'); =item Illegal hex digit ignored (W) You may have tried to use a character other than 0 - 9 or A - F in a hexadecimal number. Interpretation of the hexadecimal number stopped before the illegal character. =item No such array field (F) You tried to access an array as a hash, but the field name used is not defined. The hash at index 0 should map all valid field names to array indices for that to work. =item No such field "%s" in variable %s of type %s (F) You tried to access a field of a typed variable where the type does not know about the field name. The field names are looked up in the %FIELDS hash in the type package at compile time. The %FIELDS hash is usually set up with the 'fields' pragma. =item Out of memory during ridiculously large request (F) You can't allocate more than 2^31+"small amount" bytes. This error is most likely to be caused by a typo in the Perl program. e.g., C<$arr[time]> instead of C<$arr[$time]>. =item Range iterator outside integer range (F) One (or both) of the numeric arguments to the range operator ".." are outside the range which can be represented by integers internally. One possible workaround is to force Perl to use magical string increment by prepending "0" to your numbers. =item Recursive inheritance detected while looking for method '%s' %s (F) More than 100 levels of inheritance were encountered while invoking a method. Probably indicates an unintended loop in your inheritance hierarchy. =item Reference found where even-sized list expected (W) You gave a single reference where Perl was expecting a list with an even number of elements (for assignment to a hash). This usually means that you used the anon hash constructor when you meant to use parens. In any case, a hash requires key/value B<pairs>. %hash = { one => 1, two => 2, }; # WRONG %hash = [ qw/ an anon array / ]; # WRONG %hash = ( one => 1, two => 2, ); # right %hash = qw( one 1 two 2 ); # also fine =item Undefined value assigned to typeglob (W) An undefined value was assigned to a typeglob, a la C<*foo = undef>. This does nothing. It's possible that you really mean C<undef *foo>. =item Use of reserved word "%s" is deprecated (D) The indicated bareword is a reserved word. Future versions of perl may use it as a keyword, so you're better off either explicitly quoting the word in a manner appropriate for its context of use, or using a different name altogether. The warning can be suppressed for subroutine names by either adding a C<&> prefix, or using a package qualifier, e.g. C<&our()>, or C<Foo::our()>. =item perl: warning: Setting locale failed. (S) The whole warning message will look something like: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LC_ALL = "En_US", LANG = (unset) are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). Exactly what were the failed locale settings varies. In the above the settings were that the LC_ALL was "En_US" and the LANG had no value. This error means that Perl detected that you and/or your system administrator have set up the so-called variable system but Perl could not use those settings. This was not dead serious, fortunately: there is a "default locale" called "C" that Perl can and will use, the script will be run. Before you really fix the problem, however, you will get the same error message each time you run Perl. How to really fix the problem can be found in L<perllocale/"LOCALE PROBLEMS">. =back =head1 Obsolete Diagnostics =over 4 =item Can't mktemp() (F) The mktemp() routine failed for some reason while trying to process a B<-e> switch. Maybe your /tmp partition is full, or clobbered. Removed because B<-e> doesn't use temporary files any more. =item Can't write to temp file for B<-e>: %s (F) The write routine failed for some reason while trying to process a B<-e> switch. Maybe your /tmp partition is full, or clobbered. Removed because B<-e> doesn't use temporary files any more. =item Cannot open temporary file (F) The create routine failed for some reason while trying to process a B<-e> switch. Maybe your /tmp partition is full, or clobbered. Removed because B<-e> doesn't use temporary files any more. =item regexp too big (F) The current implementation of regular expressions uses shorts as address offsets within a string. Unfortunately this means that if the regular expression compiles to longer than 32767, it'll blow up. Usually when you want a regular expression this big, there is a better way to do it with multiple statements. See L<perlre>. =back =head1 Configuration Changes You can use "Configure -Uinstallusrbinperl" which causes installperl to skip installing perl also as /usr/bin/perl. This is useful if you prefer not to modify /usr/bin for some reason or another but harmful because many scripts assume to find Perl in /usr/bin/perl. =head1 BUGS If you find what you think is a bug, you might check the headers of recently posted articles in the comp.lang.perl.misc newsgroup. There may also be information at http://www.perl.com/perl/ , the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Make sure you trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to <F<perlbug@perl.com>> to be analysed by the Perl porting team. =head1 SEE ALSO The F<Changes> file for exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =head1 HISTORY Written by Gurusamy Sarathy <F<gsar@activestate.com>>, with many contributions from The Perl Porters. Send omissions or corrections to <F<perlbug@perl.com>>. =cut perl5280delta.pod 0000644 00000214661 15125556335 0007567 0 ustar 00 =encoding utf8 =head1 NAME perl5280delta - what is new for perl v5.28.0 =head1 DESCRIPTION This document describes differences between the 5.26.0 release and the 5.28.0 release. If you are upgrading from an earlier release such as 5.24.0, first read L<perl5260delta>, which describes differences between 5.24.0 and 5.26.0. =head1 Core Enhancements =head2 Unicode 10.0 is supported A list of changes is at L<http://www.unicode.org/versions/Unicode10.0.0>. =head2 L<C<delete>|perlfunc/delete EXPR> on key/value hash slices L<C<delete>|perlfunc/delete EXPR> can now be used on L<keyE<sol>value hash slices|perldata/KeyE<sol>Value Hash Slices>, returning the keys along with the deleted values. L<[perl #131328]|https://rt.perl.org/Ticket/Display.html?id=131328> =head2 Experimentally, there are now alphabetic synonyms for some regular expression assertions If you find it difficult to remember how to write certain of the pattern assertions, there are now alphabetic synonyms. CURRENT NEW SYNONYMS ------ ------------ (?=...) (*pla:...) or (*positive_lookahead:...) (?!...) (*nla:...) or (*negative_lookahead:...) (?<=...) (*plb:...) or (*positive_lookbehind:...) (?<!...) (*nlb:...) or (*negative_lookbehind:...) (?>...) (*atomic:...) These are considered experimental, so using any of these will raise (unless turned off) a warning in the C<experimental::alpha_assertions> category. =head2 Mixed Unicode scripts are now detectable A mixture of scripts, such as Cyrillic and Latin, in a string is often the sign of a spoofing attack. A new regular expression construct now allows for easy detection of these. For example, you can say qr/(*script_run: \d+ \b )/x And the digits matched will all be from the same set of 10. You won't get a look-alike digit from a different script that has a different value than what it appears to be. Or: qr/(*sr: \b \w+ \b )/x makes sure that all the characters come from the same script. You can also combine script runs with C<(?E<gt>...)> (or C<*atomic:...)>). Instead of writing: (*sr:(?<...)) you can now run: (*asr:...) # or (*atomic_script_run:...) This is considered experimental, so using it will raise (unless turned off) a warning in the C<experimental::script_run> category. See L<perlre/Script Runs>. =head2 In-place editing with C<perl -i> is now safer Previously in-place editing (C<perl -i>) would delete or rename the input file as soon as you started working on a new file. Without backups this would result in loss of data if there was an error, such as a full disk, when writing to the output file. This has changed so that the input file isn't replaced until the output file has been completely written and successfully closed. This works by creating a work file in the same directory, which is renamed over the input file once the output file is complete. Incompatibilities: =over =item * Since this renaming needs to only happen once, if you create a thread or child process, that renaming will only happen in the original thread or process. =item * If you change directories while processing a file, and your operating system doesn't provide the C<unlinkat()>, C<renameat()> and C<fchmodat()> functions, the final rename step may fail. =back L<[perl #127663]|https://rt.perl.org/Public/Bug/Display.html?id=127663> =head2 Initialisation of aggregate state variables A persistent lexical array or hash variable can now be initialized, by an expression such as C<state @a = qw(x y z)>. Initialization of a list of persistent lexical variables is still not possible. =head2 Full-size inode numbers On platforms where inode numbers are of a type larger than perl's native integer numerical types, L<stat|perlfunc/stat> will preserve the full content of large inode numbers by returning them in the form of strings of decimal digits. Exact comparison of inode numbers can thus be achieved by comparing with C<eq> rather than C<==>. Comparison with C<==>, and other numerical operations (which are usually meaningless on inode numbers), work as well as they did before, which is to say they fall back to floating point, and ultimately operate on a fairly useless rounded inode number if the real inode number is too big for the floating point format. =head2 The C<sprintf> C<%j> format size modifier is now available with pre-C99 compilers The actual size used depends on the platform, so remains unportable. =head2 Close-on-exec flag set atomically When opening a file descriptor, perl now generally opens it with its close-on-exec flag already set, on platforms that support doing so. This improves thread safety, because it means that an C<exec> initiated by one thread can no longer cause a file descriptor in the process of being opened by another thread to be accidentally passed to the executed program. Additionally, perl now sets the close-on-exec flag more reliably, whether it does so atomically or not. Most file descriptors were getting the flag set, but some were being missed. =head2 String- and number-specific bitwise ops are no longer experimental The new string-specific (C<&. |. ^. ~.>) and number-specific (C<& | ^ ~>) bitwise operators introduced in Perl 5.22 that are available within the scope of C<use feature 'bitwise'> are no longer experimental. Because the number-specific ops are spelled the same way as the existing operators that choose their behaviour based on their operands, these operators must still be enabled via the "bitwise" feature, in either of these two ways: use feature "bitwise"; use v5.28; # "bitwise" now included They are also now enabled by the B<-E> command-line switch. The "bitwise" feature no longer emits a warning. Existing code that disables the "experimental::bitwise" warning category that the feature previously used will continue to work. One caveat that module authors ought to be aware of is that the numeric operators now pass a fifth TRUE argument to overload methods. Any methods that check the number of operands may croak if they do not expect so many. XS authors in particular should be aware that this: SV * bitop_handler (lobj, robj, swap) may need to be changed to this: SV * bitop_handler (lobj, robj, swap, ...) =head2 Locales are now thread-safe on systems that support them These systems include Windows starting with Visual Studio 2005, and in POSIX 2008 systems. The implication is that you are now free to use locales and change them in a threaded environment. Your changes affect only your thread. See L<perllocale/Multi-threaded operation> =head2 New read-only predefined variable C<${^SAFE_LOCALES}> This variable is 1 if the Perl interpreter is operating in an environment where it is safe to use and change locales (see L<perllocale>.) This variable is true when the perl is unthreaded, or compiled in a platform that supports thread-safe locale operation (see previous item). =head1 Security =head2 [CVE-2017-12837] Heap buffer overflow in regular expression compiler Compiling certain regular expression patterns with the case-insensitive modifier could cause a heap buffer overflow and crash perl. This has now been fixed. L<[perl #131582]|https://rt.perl.org/Public/Bug/Display.html?id=131582> =head2 [CVE-2017-12883] Buffer over-read in regular expression parser For certain types of syntax error in a regular expression pattern, the error message could either contain the contents of a random, possibly large, chunk of memory, or could crash perl. This has now been fixed. L<[perl #131598]|https://rt.perl.org/Public/Bug/Display.html?id=131598> =head2 [CVE-2017-12814] C<$ENV{$key}> stack buffer overflow on Windows A possible stack buffer overflow in the C<%ENV> code on Windows has been fixed by removing the buffer completely since it was superfluous anyway. L<[perl #131665]|https://rt.perl.org/Public/Bug/Display.html?id=131665> =head2 Default Hash Function Change Perl 5.28.0 retires various older hash functions which are not viewed as sufficiently secure for use in Perl. We now support four general purpose hash functions, Siphash (2-4 and 1-3 variants), and Zaphod32, and StadtX hash. In addition we support SBOX32 (a form of tabular hashing) for hashing short strings, in conjunction with any of the other hash functions provided. By default Perl is configured to support SBOX hashing of strings up to 24 characters, in conjunction with StadtX hashing on 64 bit builds, and Zaphod32 hashing for 32 bit builds. You may control these settings with the following options to Configure: -DPERL_HASH_FUNC_SIPHASH -DPERL_HASH_FUNC_SIPHASH13 -DPERL_HASH_FUNC_STADTX -DPERL_HASH_FUNC_ZAPHOD32 To disable SBOX hashing you can use -DPERL_HASH_USE_SBOX32_ALSO=0 And to set the maximum length to use SBOX32 hashing on with: -DSBOX32_MAX_LEN=16 The maximum length allowed is 256. There probably isn't much point in setting it higher than the default. =head1 Incompatible Changes =head2 Subroutine attribute and signature order The experimental subroutine signatures feature has been changed so that subroutine attributes must now come before the signature rather than after. This is because attributes like C<:lvalue> can affect the compilation of code within the signature, for example: sub f :lvalue ($a = do { $x = "abc"; return substr($x,0,1)}) { ...} Note that this the second time they have been flipped: sub f :lvalue ($a, $b) { ... }; # 5.20; 5.28 onwards sub f ($a, $b) :lvalue { ... }; # 5.22 - 5.26 =head2 Comma-less variable lists in formats are no longer allowed Omitting the commas between variables passed to formats is no longer allowed. This has been deprecated since Perl 5.000. =head2 The C<:locked> and C<:unique> attributes have been removed These have been no-ops and deprecated since Perl 5.12 and 5.10, respectively. =head2 C<\N{}> with nothing between the braces is now illegal This has been deprecated since Perl 5.24. =head2 Opening the same symbol as both a file and directory handle is no longer allowed Using C<open()> and C<opendir()> to associate both a filehandle and a dirhandle to the same symbol (glob or scalar) has been deprecated since Perl 5.10. =head2 Use of bare C<< << >> to mean C<< <<"" >> is no longer allowed Use of a bare terminator has been deprecated since Perl 5.000. =head2 Setting $/ to a reference to a non-positive integer no longer allowed This used to work like setting it to C<undef>, but has been deprecated since Perl 5.20. =head2 Unicode code points with values exceeding C<IV_MAX> are now fatal This was deprecated since Perl 5.24. =head2 The C<B::OP::terse> method has been removed Use C<B::Concise::b_terse> instead. =head2 Use of inherited AUTOLOAD for non-methods is no longer allowed This was deprecated in Perl 5.004. =head2 Use of strings with code points over 0xFF is not allowed for bitwise string operators Code points over C<0xFF> do not make sense for bitwise operators and such an operation will now croak, except for a few remaining cases. See L<perldeprecation>. This was deprecated in Perl 5.24. =head2 Setting C<${^ENCODING}> to a defined value is now illegal This has been deprecated since Perl 5.22 and a no-op since Perl 5.26. =head2 Backslash no longer escapes colon in PATH for the C<-S> switch Previously the C<-S> switch incorrectly treated backslash ("\") as an escape for colon when traversing the C<PATH> environment variable. L<[perl #129183]|https://rt.perl.org/Ticket/Display.html?id=129183> =head2 the -DH (DEBUG_H) misfeature has been removed On a perl built with debugging support, the C<H> flag to the C<-D> debugging option has been removed. This was supposed to dump hash values, but has been broken for many years. =head2 Yada-yada is now strictly a statement By the time of its initial stable release in Perl 5.12, the C<...> (yada-yada) operator was explicitly intended to serve as a statement, not an expression. However, the original implementation was confused on this point, leading to inconsistent parsing. The operator was accidentally accepted in a few situations where it did not serve as a complete statement, such as ... . "foo"; ... if $a < $b; The parsing has now been made consistent, permitting yada-yada only as a statement. Affected code can use C<do{...}> to put a yada-yada into an arbitrary expression context. =head2 Sort algorithm can no longer be specified Since Perl 5.8, the L<sort> pragma has had subpragmata C<_mergesort>, C<_quicksort>, and C<_qsort> that can be used to specify which algorithm perl should use to implement the L<sort|perlfunc/sort> builtin. This was always considered a dubious feature that might not last, hence the underscore spellings, and they were documented as not being portable beyond Perl 5.8. These subpragmata have now been deleted, and any attempt to use them is an error. The L<sort> pragma otherwise remains, and the algorithm-neutral C<stable> subpragma can be used to control sorting behaviour. L<[perl #119635]|https://rt.perl.org/Ticket/Display.html?id=119635> =head2 Over-radix digits in floating point literals Octal and binary floating point literals used to permit any hexadecimal digit to appear after the radix point. The digits are now restricted to those appropriate for the radix, as digits before the radix point always were. =head2 Return type of C<unpackstring()> The return types of the C API functions C<unpackstring()> and C<unpack_str()> have changed from C<I32> to C<SSize_t>, in order to accommodate datasets of more than two billion items. =head1 Deprecations =head2 Use of L<C<vec>|perlfunc/vec EXPR,OFFSET,BITS> on strings with code points above 0xFF is deprecated Such strings are represented internally in UTF-8, and C<vec> is a bit-oriented operation that will likely give unexpected results on those strings. =head2 Some uses of unescaped C<"{"> in regexes are no longer fatal Perl 5.26.0 fatalized some uses of an unescaped left brace, but an exception was made at the last minute, specifically crafted to be a minimal change to allow GNU Autoconf to work. That tool is heavily depended upon, and continues to use the deprecated usage. Its use of an unescaped left brace is one where we have no intention of repurposing C<"{"> to be something other than itself. That exception is now generalized to include various other such cases where the C<"{"> will not be repurposed. Note that these uses continue to raise a deprecation message. =head2 Use of unescaped C<"{"> immediately after a C<"("> in regular expression patterns is deprecated Using unescaped left braces is officially deprecated everywhere, but it is not enforced in contexts where their use does not interfere with expected extensions to the language. A deprecation is added in this release when the brace appears immediately after an opening parenthesis. Before this, even if the brace was part of a legal quantifier, it was not interpreted as such, but as the literal characters, unlike other quantifiers that follow a C<"("> which are considered errors. Now, their use will raise a deprecation message, unless turned off. =head2 Assignment to C<$[> will be fatal in Perl 5.30 Assigning a non-zero value to L<C<$[>|perlvar/$[> has been deprecated since Perl 5.12, but was never given a deadline for removal. This has now been scheduled for Perl 5.30. =head2 hostname() won't accept arguments in Perl 5.32 Passing arguments to C<Sys::Hostname::hostname()> was already deprecated, but didn't have a removal date. This has now been scheduled for Perl 5.32. L<[perl #124349]|https://rt.perl.org/Ticket/Display.html?id=124349> =head2 Module removals The following modules will be removed from the core distribution in a future release, and will at that time need to be installed from CPAN. Distributions on CPAN which require these modules will need to list them as prerequisites. The core versions of these modules will now issue C<"deprecated">-category warnings to alert you to this fact. To silence these deprecation warnings, install the modules in question from CPAN. Note that these are (with rare exceptions) fine modules that you are encouraged to continue to use. Their disinclusion from core primarily hinges on their necessity to bootstrapping a fully functional, CPAN-capable Perl installation, not usually on concerns over their design. =over =item B::Debug =item L<Locale::Codes> and its associated Country, Currency and Language modules =back =head1 Performance Enhancements =over 4 =item * The start up overhead for creating regular expression patterns with Unicode properties (C<\p{...}>) has been greatly reduced in most cases. =item * Many string concatenation expressions are now considerably faster, due to the introduction internally of a C<multiconcat> opcode which combines multiple concatenations, and optionally a C<=> or C<.=>, into a single action. For example, apart from retrieving C<$s>, C<$a> and C<$b>, this whole expression is now handled as a single op: $s .= "a=$a b=$b\n" As a special case, if the LHS of an assignment is a lexical variable or C<my $s>, the op itself handles retrieving the lexical variable, which is faster. In general, the more the expression includes a mix of constant strings and variable expressions, the longer the expression, and the more it mixes together non-utf8 and utf8 strings, the more marked the performance improvement. For example on a C<x86_64> system, this code has been benchmarked running four times faster: my $s; my $a = "ab\x{100}cde"; my $b = "fghij"; my $c = "\x{101}klmn"; for my $i (1..10_000_000) { $s = "\x{100}wxyz"; $s .= "foo=$a bar=$b baz=$c"; } In addition, C<sprintf> expressions which have a constant format containing only C<%s> and C<%%> format elements, and which have a fixed number of arguments, are now also optimised into a C<multiconcat> op. =item * The C<ref()> builtin is now much faster in boolean context, since it no longer bothers to construct a temporary string like C<Foo=ARRAY(0x134af48)>. =item * C<keys()> in void and scalar contexts is now more efficient. =item * The common idiom of comparing the result of index() with -1 is now specifically optimised, e.g. if (index(...) != -1) { ... } =item * C<for()> loops and similar constructs are now more efficient in most cases. =item * L<File::Glob> has been modified to remove unnecessary backtracking and recursion, thanks to Russ Cox. See L<https://research.swtch.com/glob> for more details. =item * The XS-level C<SvTRUE()> API function is now more efficient. =item * Various integer-returning ops are now more efficient in scalar/boolean context. =item * Slightly improved performance when parsing stash names. L<[perl #129990]|https://rt.perl.org/Public/Bug/Display.html?id=129990> =item * Calls to C<require> for an already loaded module are now slightly faster. L<[perl #132171]|https://rt.perl.org/Public/Bug/Display.html?id=132171> =item * The performance of pattern matching C<[[:ascii:]]> and C<[[:^ascii:]]> has been improved significantly except on EBCDIC platforms. =item * Various optimizations have been applied to matching regular expression patterns, so under the right circumstances, significant performance gains may be noticed. But in an application with many varied patterns, little overall improvement likely will be seen. =item * Other optimizations have been applied to UTF-8 handling, but these are not typically a major factor in most applications. =back =head1 Modules and Pragmata Key highlights in this release across several modules: =head2 Removal of use vars The usage of C<use vars> has been discouraged since the introduction of C<our> in Perl 5.6.0. Where possible the usage of this pragma has now been removed from the Perl source code. This had a slight effect (for the better) on the output of WARNING_BITS in L<B::Deparse>. =head2 Use of DynaLoader changed to XSLoader in many modules XSLoader is more modern, and most modules already require perl 5.6 or greater, so no functionality is lost by switching. In some cases, we have also made changes to the local implementation that may not be reflected in the version on CPAN due to a desire to maintain more backwards compatibility. =head2 Updated Modules and Pragmata =over 4 =item * L<Archive::Tar> has been upgraded from version 2.24 to 2.30. This update also handled CVE-2018-12015: directory traversal vulnerability. L<[cpan #125523]|https://rt.cpan.org/Ticket/Display.html?id=125523> =item * L<arybase> has been upgraded from version 0.12 to 0.15. =item * L<Attribute::Handlers> has been upgraded from version 0.99 to 1.01. =item * L<attributes> has been upgraded from version 0.29 to 0.33. =item * L<B> has been upgraded from version 1.68 to 1.74. =item * L<B::Concise> has been upgraded from version 0.999 to 1.003. =item * L<B::Debug> has been upgraded from version 1.24 to 1.26. NOTE: L<B::Debug> is deprecated and may be removed from a future version of Perl. =item * L<B::Deparse> has been upgraded from version 1.40 to 1.48. It includes many bug fixes, and in particular, it now deparses variable attributes correctly: my $x :foo; # used to deparse as # 'attributes'->import('main', \$x, 'foo'), my $x; =item * L<base> has been upgraded from version 2.25 to 2.27. =item * L<bignum> has been upgraded from version 0.47 to 0.49. =item * L<blib> has been upgraded from version 1.06 to 1.07. =item * L<bytes> has been upgraded from version 1.05 to 1.06. =item * L<Carp> has been upgraded from version 1.42 to 1.50. If a package on the call stack contains a constant named C<ISA>, Carp no longer throws a "Not a GLOB reference" error. L<Carp>, when generating stack traces, now attempts to work around longstanding bugs resulting from Perl's non-reference-counted stack. L<[perl #52610]|https://rt.perl.org/Ticket/Display.html?id=52610> Carp has been modified to avoid assuming that objects cannot be overloaded without the L<overload> module loaded (this can happen with objects created by XS modules). Previously, infinite recursion would result if an XS-defined overload method itself called Carp. L<[perl #132828]|https://rt.perl.org/Ticket/Display.html?id=132828> Carp now avoids using C<overload::StrVal>, partly because older versions of L<overload> (included with perl 5.14 and earlier) load L<Scalar::Util> at run time, which will fail if Carp has been invoked after a syntax error. =item * L<charnames> has been upgraded from version 1.44 to 1.45. =item * L<Compress::Raw::Zlib> has been upgraded from version 2.074 to 2.076. This addresses a security vulnerability in older versions of the 'zlib' library (which is bundled with Compress-Raw-Zlib). =item * L<Config::Extensions> has been upgraded from version 0.01 to 0.02. =item * L<Config::Perl::V> has been upgraded from version 0.28 to 0.29. =item * L<CPAN> has been upgraded from version 2.18 to 2.20. =item * L<Data::Dumper> has been upgraded from version 2.167 to 2.170. Quoting of glob names now obeys the Useqq option L<[perl #119831]|https://rt.perl.org/Ticket/Display.html?id=119831>. Attempts to set an option to C<undef> through a combined getter/setter method are no longer mistaken for getter calls L<[perl #113090]|https://rt.perl.org/Ticket/Display.html?id=113090>. =item * L<Devel::Peek> has been upgraded from version 1.26 to 1.27. =item * L<Devel::PPPort> has been upgraded from version 3.35 to 3.40. L<Devel::PPPort> has moved from cpan-first to perl-first maintenance Primary responsibility for the code in Devel::PPPort has moved into core perl. In a practical sense there should be no change except that hopefully it will stay more up to date with changes made to symbols in perl, rather than needing to be updated after the fact. =item * L<Digest::SHA> has been upgraded from version 5.96 to 6.01. =item * L<DirHandle> has been upgraded from version 1.04 to 1.05. =item * L<DynaLoader> has been upgraded from version 1.42 to 1.45. Its documentation now shows the use of C<__PACKAGE__> and direct object syntax L<[perl #132247]|https://rt.perl.org/Ticket/Display.html?id=132247>. =item * L<Encode> has been upgraded from version 2.88 to 2.97. =item * L<encoding> has been upgraded from version 2.19 to 2.22. =item * L<Errno> has been upgraded from version 1.28 to 1.29. =item * L<experimental> has been upgraded from version 0.016 to 0.019. =item * L<Exporter> has been upgraded from version 5.72 to 5.73. =item * L<ExtUtils::CBuilder> has been upgraded from version 0.280225 to 0.280230. =item * L<ExtUtils::Constant> has been upgraded from version 0.23 to 0.25. =item * L<ExtUtils::Embed> has been upgraded from version 1.34 to 1.35. =item * L<ExtUtils::Install> has been upgraded from version 2.04 to 2.14. =item * L<ExtUtils::MakeMaker> has been upgraded from version 7.24 to 7.34. =item * L<ExtUtils::Miniperl> has been upgraded from version 1.06 to 1.08. =item * L<ExtUtils::ParseXS> has been upgraded from version 3.34 to 3.39. =item * L<ExtUtils::Typemaps> has been upgraded from version 3.34 to 3.38. =item * L<ExtUtils::XSSymSet> has been upgraded from version 1.3 to 1.4. =item * L<feature> has been upgraded from version 1.47 to 1.52. =item * L<fields> has been upgraded from version 2.23 to 2.24. =item * L<File::Copy> has been upgraded from version 2.32 to 2.33. It will now use the sub-second precision variant of utime() supplied by L<Time::HiRes> where available. L<[perl #132401]|https://rt.perl.org/Ticket/Display.html?id=132401>. =item * L<File::Fetch> has been upgraded from version 0.52 to 0.56. =item * L<File::Glob> has been upgraded from version 1.28 to 1.31. =item * L<File::Path> has been upgraded from version 2.12_01 to 2.15. =item * L<File::Spec> and L<Cwd> have been upgraded from version 3.67 to 3.74. =item * L<File::stat> has been upgraded from version 1.07 to 1.08. =item * L<FileCache> has been upgraded from version 1.09 to 1.10. =item * L<Filter::Simple> has been upgraded from version 0.93 to 0.95. =item * L<Filter::Util::Call> has been upgraded from version 1.55 to 1.58. =item * L<GDBM_File> has been upgraded from version 1.15 to 1.17. Its documentation now explains that C<each> and C<delete> don't mix in hashes tied to this module L<[perl #117449]|https://rt.perl.org/Ticket/Display.html?id=117449>. It will now retry opening with an acceptable block size if asking gdbm to default the block size failed L<[perl #119623]|https://rt.perl.org/Ticket/Display.html?id=119623>. =item * L<Getopt::Long> has been upgraded from version 2.49 to 2.5. =item * L<Hash::Util::FieldHash> has been upgraded from version 1.19 to 1.20. =item * L<I18N::Langinfo> has been upgraded from version 0.13 to 0.17. This module is now available on all platforms, emulating the system L<nl_langinfo(3)> on systems that lack it. Some caveats apply, as L<detailed in its documentation|I18N::Langinfo>, the most severe being that, except for MS Windows, the C<CODESET> item is not implemented on those systems, always returning C<"">. It now sets the UTF-8 flag in its returned scalar if the string contains legal non-ASCII UTF-8, and the locale is UTF-8 L<[perl #127288]|https://rt.perl.org/Ticket/Display.html?id=127288>. This update also fixes a bug in which the underlying locale was ignored for the C<RADIXCHAR> (always was returned as a dot) and the C<THOUSEP> (always empty). Now the locale-appropriate values are returned. =item * L<I18N::LangTags> has been upgraded from version 0.42 to 0.43. =item * L<if> has been upgraded from version 0.0606 to 0.0608. =item * L<IO> has been upgraded from version 1.38 to 1.39. =item * L<IO::Socket::IP> has been upgraded from version 0.38 to 0.39. =item * L<IPC::Cmd> has been upgraded from version 0.96 to 1.00. =item * L<JSON::PP> has been upgraded from version 2.27400_02 to 2.97001. =item * The C<libnet> distribution has been upgraded from version 3.10 to 3.11. =item * L<List::Util> has been upgraded from version 1.46_02 to 1.49. =item * L<Locale::Codes> has been upgraded from version 3.42 to 3.56. B<NOTE>: L<Locale::Codes> scheduled to be removed from core in Perl 5.30. =item * L<Locale::Maketext> has been upgraded from version 1.28 to 1.29. =item * L<Math::BigInt> has been upgraded from version 1.999806 to 1.999811. =item * L<Math::BigInt::FastCalc> has been upgraded from version 0.5005 to 0.5006. =item * L<Math::BigRat> has been upgraded from version 0.2611 to 0.2613. =item * L<Module::CoreList> has been upgraded from version 5.20170530 to 5.20180622. =item * L<mro> has been upgraded from version 1.20 to 1.22. =item * L<Net::Ping> has been upgraded from version 2.55 to 2.62. =item * L<NEXT> has been upgraded from version 0.67 to 0.67_01. =item * L<ODBM_File> has been upgraded from version 1.14 to 1.15. =item * L<Opcode> has been upgraded from version 1.39 to 1.43. =item * L<overload> has been upgraded from version 1.28 to 1.30. =item * L<PerlIO::encoding> has been upgraded from version 0.25 to 0.26. =item * L<PerlIO::scalar> has been upgraded from version 0.26 to 0.29. =item * L<PerlIO::via> has been upgraded from version 0.16 to 0.17. =item * L<Pod::Functions> has been upgraded from version 1.11 to 1.13. =item * L<Pod::Html> has been upgraded from version 1.2202 to 1.24. A title for the HTML document will now be automatically generated by default from a "NAME" section in the POD document, as it used to be before the module was rewritten to use L<Pod::Simple::XHTML> to do the core of its job L<[perl #110520]|https://rt.perl.org/Ticket/Display.html?id=110520>. =item * L<Pod::Perldoc> has been upgraded from version 3.28 to 3.2801. =item * The C<podlators> distribution has been upgraded from version 4.09 to 4.10. Man page references and function names now follow the Linux man page formatting standards, instead of the Solaris standard. =item * L<POSIX> has been upgraded from version 1.76 to 1.84. Some more cautions were added about using locale-specific functions in threaded applications. =item * L<re> has been upgraded from version 0.34 to 0.36. =item * L<Scalar::Util> has been upgraded from version 1.46_02 to 1.50. =item * L<SelfLoader> has been upgraded from version 1.23 to 1.25. =item * L<Socket> has been upgraded from version 2.020_03 to 2.027. =item * L<sort> has been upgraded from version 2.02 to 2.04. =item * L<Storable> has been upgraded from version 2.62 to 3.08. =item * L<Sub::Util> has been upgraded from version 1.48 to 1.49. =item * L<subs> has been upgraded from version 1.02 to 1.03. =item * L<Sys::Hostname> has been upgraded from version 1.20 to 1.22. =item * L<Term::ReadLine> has been upgraded from version 1.16 to 1.17. =item * L<Test> has been upgraded from version 1.30 to 1.31. =item * L<Test::Harness> has been upgraded from version 3.38 to 3.42. =item * L<Test::Simple> has been upgraded from version 1.302073 to 1.302133. =item * L<threads> has been upgraded from version 2.15 to 2.22. The documentation now better describes the problems that arise when returning values from threads, and no longer warns about creating threads in C<BEGIN> blocks. L<[perl #96538]|https://rt.perl.org/Ticket/Display.html?id=96538> =item * L<threads::shared> has been upgraded from version 1.56 to 1.58. =item * L<Tie::Array> has been upgraded from version 1.06 to 1.07. =item * L<Tie::StdHandle> has been upgraded from version 4.4 to 4.5. =item * L<Time::gmtime> has been upgraded from version 1.03 to 1.04. =item * L<Time::HiRes> has been upgraded from version 1.9741 to 1.9759. =item * L<Time::localtime> has been upgraded from version 1.02 to 1.03. =item * L<Time::Piece> has been upgraded from version 1.31 to 1.3204. =item * L<Unicode::Collate> has been upgraded from version 1.19 to 1.25. =item * L<Unicode::Normalize> has been upgraded from version 1.25 to 1.26. =item * L<Unicode::UCD> has been upgraded from version 0.68 to 0.70. The function C<num> now accepts an optional parameter to help in diagnosing error returns. =item * L<User::grent> has been upgraded from version 1.01 to 1.02. =item * L<User::pwent> has been upgraded from version 1.00 to 1.01. =item * L<utf8> has been upgraded from version 1.19 to 1.21. =item * L<vars> has been upgraded from version 1.03 to 1.04. =item * L<version> has been upgraded from version 0.9917 to 0.9923. =item * L<VMS::DCLsym> has been upgraded from version 1.08 to 1.09. =item * L<VMS::Stdio> has been upgraded from version 2.41 to 2.44. =item * L<warnings> has been upgraded from version 1.37 to 1.42. It now includes new functions with names ending in C<_at_level>, allowing callers to specify the exact call frame. L<[perl #132468]|https://rt.perl.org/Ticket/Display.html?id=132468> =item * L<XS::Typemap> has been upgraded from version 0.15 to 0.16. =item * L<XSLoader> has been upgraded from version 0.27 to 0.30. Its documentation now shows the use of C<__PACKAGE__>, and direct object syntax for example C<DynaLoader> usage L<[perl #132247]|https://rt.perl.org/Ticket/Display.html?id=132247>. Platforms that use C<mod2fname> to edit the names of loadable libraries now look for bootstrap (.bs) files under the correct, non-edited name. =back =head2 Removed Modules and Pragmata =over 4 =item * The C<VMS::stdio> compatibility shim has been removed. =back =head1 Documentation =head2 Changes to Existing Documentation We have attempted to update the documentation to reflect the changes listed in this document. If you find any we have missed, send email to L<perlbug@perl.org|mailto:perlbug@perl.org>. Additionally, the following selected changes have been made: =head3 L<perlapi> =over 4 =item * The API functions C<perl_parse()>, C<perl_run()>, and C<perl_destruct()> are now documented comprehensively, where previously the only documentation was a reference to the L<perlembed> tutorial. =item * The documentation of C<newGIVENOP()> has been belatedly updated to account for the removal of lexical C<$_>. =item * The API functions C<newCONSTSUB()> and C<newCONSTSUB_flags()> are documented much more comprehensively than before. =back =head3 L<perldata> =over 4 =item * The section "Truth and Falsehood" in L<perlsyn> has been moved into L<perldata>. =back =head3 L<perldebguts> =over 4 =item * The description of the conditions under which C<DB::sub()> will be called has been clarified. L<[perl #131672]|https://rt.perl.org/Ticket/Display.html?id=131672> =back =head3 L<perldiag> =over 4 =item * L<perldiag/Variable length lookbehind not implemented in regex mE<sol>%sE<sol>> This now gives more ideas as to workarounds to the issue that was introduced in Perl 5.18 (but not documented explicitly in its perldelta) for the fact that some Unicode C</i> rules cause a few sequences such as (?<!st) to be considered variable length, and hence disallowed. =item * "Use of state $_ is experimental" in L<perldiag> This entry has been removed, as the experimental support of this construct was removed in perl 5.24.0. =item * The diagnostic C<Initialization of state variables in list context currently forbidden> has changed to C<Initialization of state variables in list currently forbidden>, because list-context initialization of single aggregate state variables is now permitted. =back =head3 L<perlembed> =over 4 =item * The examples in L<perlembed> have been made more portable in the way they exit, and the example that gets an exit code from the embedded Perl interpreter now gets it from the right place. The examples that pass a constructed argv to Perl now show the mandatory null C<argv[argc]>. =item * An example in L<perlembed> used the string value of C<ERRSV> as a format string when calling croak(). If that string contains format codes such as C<%s> this could crash the program. This has been changed to a call to croak_sv(). An alternative could have been to supply a trivial format string: croak("%s", SvPV_nolen(ERRSV)); or as a special case for C<ERRSV> simply: croak(NULL); =back =head3 L<perlfunc> =over 4 =item * There is now a note that warnings generated by built-in functions are documented in L<perldiag> and L<warnings>. L<[perl #116080]|https://rt.perl.org/Ticket/Display.html?id=116080> =item * The documentation for the C<exists> operator no longer says that autovivification behaviour "may be fixed in a future release". We've determined that we're not going to change the default behaviour. L<[perl #127712]|https://rt.perl.org/Ticket/Display.html?id=127712> =item * A couple of small details in the documentation for the C<bless> operator have been clarified. L<[perl #124428]|https://rt.perl.org/Ticket/Display.html?id=124428> =item * The description of C<@INC> hooks in the documentation for C<require> has been corrected to say that filter subroutines receive a useless first argument. L<[perl #115754]|https://rt.perl.org/Ticket/Display.html?id=115754> =item * The documentation of C<ref> has been rewritten for clarity. =item * The documentation of C<use> now explains what syntactically qualifies as a version number for its module version checking feature. =item * The documentation of C<warn> has been updated to reflect that since Perl 5.14 it has treated complex exception objects in a manner equivalent to C<die>. L<[perl #121372]|https://rt.perl.org/Ticket/Display.html?id=121372> =item * The documentation of C<die> and C<warn> has been revised for clarity. =item * The documentation of C<each> has been improved, with a slightly more explicit description of the sharing of iterator state, and with caveats regarding the fragility of while-each loops. L<[perl #132644]|https://rt.perl.org/Ticket/Display.html?id=132644> =item * Clarification to C<require> was added to explain the differences between require Foo::Bar; require "Foo/Bar.pm"; =back =head3 L<perlgit> =over 4 =item * The precise rules for identifying C<smoke-me> branches are now stated. =back =head3 L<perlguts> =over 4 =item * The section on reference counting in L<perlguts> has been heavily revised, to describe references in the way a programmer needs to think about them rather than in terms of the physical data structures. =item * Improve documentation related to UTF-8 multibytes. =back =head3 L<perlintern> =over 4 =item * The internal functions C<newXS_len_flags()> and C<newATTRSUB_x()> are now documented. =back =head3 L<perlobj> =over 4 =item * The documentation about C<DESTROY> methods has been corrected, updated, and revised, especially in regard to how they interact with exceptions. L<[perl #122753]|https://rt.perl.org/Ticket/Display.html?id=122753> =back =head3 L<perlop> =over 4 =item * The description of the C<x> operator in L<perlop> has been clarified. L<[perl #132460]|https://rt.perl.org/Ticket/Display.html?id=132460> =item * L<perlop> has been updated to note that C<qw>'s whitespace rules differ from that of C<split>'s in that only ASCII whitespace is used. =item * The general explanation of operator precedence and associativity has been corrected and clarified. L<[perl #127391]|https://rt.perl.org/Ticket/Display.html?id=127391> =item * The documentation for the C<\> referencing operator now explains the unusual context that it supplies to its operand. L<[perl #131061]|https://rt.perl.org/Ticket/Display.html?id=131061> =back =head3 L<perlrequick> =over 4 =item * Clarifications on metacharacters and character classes =back =head3 L<perlretut> =over 4 =item * Clarify metacharacters. =back =head3 L<perlrun> =over 4 =item * Clarify the differences between B<< -M >> and B<< -m >>. L<[perl #131518]|https://rt.perl.org/Ticket/Display.html?id=131518> =back =head3 L<perlsec> =over 4 =item * The documentation about set-id scripts has been updated and revised. L<[perl #74142]|https://rt.perl.org/Ticket/Display.html?id=74142> =item * A section about using C<sudo> to run Perl scripts has been added. =back =head3 L<perlsyn> =over 4 =item * The section "Truth and Falsehood" in L<perlsyn> has been removed from that document, where it didn't belong, and merged into the existing paragraph on the same topic in L<perldata>. =item * The means to disambiguate between code blocks and hash constructors, already documented in L<perlref>, are now documented in L<perlsyn> too. L<[perl #130958]|https://rt.perl.org/Ticket/Display.html?id=130958> =back =head3 L<perluniprops> =over 4 =item * L<perluniprops> has been updated to note that C<\p{Word}> now includes code points matching the C<\p{Join_Control}> property. The change to the property was made in Perl 5.18, but not documented until now. There are currently only two code points that match this property U+200C (ZERO WIDTH NON-JOINER) and U+200D (ZERO WIDTH JOINER). =item * For each binary table or property, the documentation now includes which characters in the range C<\x00-\xFF> it matches, as well as a list of the first few ranges of code points matched above that. =back =head3 L<perlvar> =over 4 =item * The entry for C<$+> in perlvar has been expanded upon to describe handling of multiply-named capturing groups. =back =head3 L<perlfunc>, L<perlop>, L<perlsyn> =over 4 =item * In various places, improve the documentation of the special cases in the condition expression of a while loop, such as implicit C<defined> and assignment to C<$_>. L<[perl #132644]|https://rt.perl.org/Ticket/Display.html?id=132644> =back =head1 Diagnostics The following additions or changes have been made to diagnostic output, including warnings and fatal error messages. For the complete list of diagnostic messages, see L<perldiag>. =head2 New Diagnostics =head3 New Errors =over 4 =item * L<Can't "goto" into a "given" block|perldiag/"Can't E<quot>gotoE<quot> into a E<quot>givenE<quot> block"> (F) A "goto" statement was executed to jump into the middle of a C<given> block. You can't get there from here. See L<perlfunc/goto>. =item * L<Can't "goto" into a binary or list expression|perldiag/"Can't E<quot>gotoE<quot> into a binary or list expression"> Use of C<goto> to jump into the parameter of a binary or list operator has been prohibited, to prevent crashes and stack corruption. L<[perl #130936]|https://rt.perl.org/Ticket/Display.html?id=130936> You may only enter the I<first> argument of an operator that takes a fixed number of arguments, since this is a case that will not cause stack corruption. L<[perl #132854]|https://rt.perl.org/Ticket/Display.html?id=132854> =back =head3 New Warnings =over 4 =item * L<Old package separator used in string|perldiag/"Old package separator used in string"> (W syntax) You used the old package separator, "'", in a variable named inside a double-quoted string; e.g., C<"In $name's house">. This is equivalent to C<"In $name::s house">. If you meant the former, put a backslash before the apostrophe (C<"In $name\'s house">). =item * L<perldiag/Locale '%s' contains (at least) the following characters which have unexpected meanings: %s The Perl program will use the expected meanings> =back =head2 Changes to Existing Diagnostics =over 4 =item * A false-positive warning that was issued when using a numerically-quantified sub-pattern in a recursive regex has been silenced. L<[perl #131868]|https://rt.perl.org/Public/Bug/Display.html?id=131868> =item * The warning about useless use of a concatenation operator in void context is now generated for expressions with multiple concatenations, such as C<$a.$b.$c>, which used to mistakenly not warn. L<[perl #6997]|https://rt.perl.org/Ticket/Display.html?id=6997> =item * Warnings that a variable or subroutine "masks earlier declaration in same ...", or that an C<our> variable has been redeclared, have been moved to a new warnings category "shadow". Previously they were in category "misc". =item * The deprecation warning from C<Sys::Hostname::hostname()> saying that it doesn't accept arguments now states the Perl version in which the warning will be upgraded to an error. L<[perl #124349]|https://rt.perl.org/Ticket/Display.html?id=124349> =item * The L<perldiag> entry for the error regarding a set-id script has been expanded to make clear that the error is reporting a specific security vulnerability, and to advise how to fix it. =item * The C<< Unable to flush stdout >> error message was missing a trailing newline. [debian #875361] =back =head1 Utility Changes =head2 L<perlbug> =over 4 =item * C<--help> and C<--version> options have been added. =back =head1 Configuration and Compilation =over 4 =item * C89 requirement Perl has been documented as requiring a C89 compiler to build since October 1998. A variety of simplifications have now been made to Perl's internals to rely on the features specified by the C89 standard. We believe that this internal change hasn't altered the set of platforms that Perl builds on, but please report a bug if Perl now has new problems building on your platform. =item * On GCC, C<-Werror=pointer-arith> is now enabled by default, disallowing arithmetic on void and function pointers. =item * Where an HTML version of the documentation is installed, the HTML documents now use relative links to refer to each other. Links from the index page of L<perlipc> to the individual section documents are now correct. L<[perl #110056]|https://rt.perl.org/Ticket/Display.html?id=110056> =item * F<lib/unicore/mktables> now correctly canonicalizes the names of the dependencies stored in the files it generates. F<regen/mk_invlists.pl>, unlike the other F<regen/*.pl> scripts, used C<$0> to name itself in the dependencies stored in the files it generates. It now uses a literal so that the path stored in the generated files doesn't depend on how F<regen/mk_invlists.pl> is invoked. This lack of canonical names could cause test failures in F<t/porting/regen.t>. L<[perl #132925]|https://rt.perl.org/Ticket/Display.html?id=132925> =item * New probes =over 2 =item HAS_BUILTIN_ADD_OVERFLOW =item HAS_BUILTIN_MUL_OVERFLOW =item HAS_BUILTIN_SUB_OVERFLOW =item HAS_THREAD_SAFE_NL_LANGINFO_L =item HAS_LOCALECONV_L =item HAS_MBRLEN =item HAS_MBRTOWC =item HAS_MEMRCHR =item HAS_NANOSLEEP =item HAS_STRNLEN =item HAS_STRTOLD_L =item I_WCHAR =back =back =head1 Testing =over 4 =item * Testing of the XS-APItest directory is now done in parallel, where applicable. =item * Perl now includes a default F<.travis.yml> file for Travis CI testing on github mirrors. L<[perl #123981]|https://rt.perl.org/Ticket/Display.html?id=123981> =item * The watchdog timer count in F<re/pat_psycho.t> can now be overridden. This test can take a long time to run, so there is a timer to keep this in check (currently, 5 minutes). This commit adds checking the environment variable C<< PERL_TEST_TIME_OUT_FACTOR >>; if set, the time out setting is multiplied by its value. =item * F<harness> no longer waits for 30 seconds when running F<t/io/openpid.t>. L<[perl #121028]|https://rt.perl.org/Ticket/Display.html?id=121028> L<[perl #132867]|https://rt.perl.org/Ticket/Display.html?id=132867> =back =head1 Packaging For the past few years we have released perl using three different archive formats: bzip (C<.bz2>), LZMA2 (C<.xz>) and gzip (C<.gz>). Since xz compresses better and decompresses faster, and gzip is more compatible and uses less memory, we have dropped the C<.bz2> archive format with this release. (If this poses a problem, do let us know; see L</Reporting Bugs>, below.) =head1 Platform Support =head2 Discontinued Platforms =over 4 =item PowerUX / Power MAX OS Compiler hints and other support for these apparently long-defunct platforms has been removed. =back =head2 Platform-Specific Notes =over 4 =item CentOS Compilation on CentOS 5 is now fixed. =item Cygwin A build with the quadmath library can now be done on Cygwin. =item Darwin Perl now correctly uses reentrant functions, like C<asctime_r>, on versions of Darwin that have support for them. =item FreeBSD FreeBSD's F<< /usr/share/mk/sys.mk >> specifies C<< -O2 >> for architectures other than ARM and MIPS. By default, perl is now compiled with the same optimization levels. =item VMS Several fix-ups for F<configure.com>, marking function VMS has (or doesn't have). CRTL features can now be set by embedders before invoking Perl by using the C<decc$feature_set> and C<decc$feature_set_value> functions. Previously any attempt to set features after image initialization were ignored. =item Windows =over 4 =item * Support for compiling perl on Windows using Microsoft Visual Studio 2017 (containing Visual C++ 14.1) has been added. =item * Visual C++ compiler version detection has been improved to work on non-English language systems. =item * We now set C<$Config{libpth}> correctly for 64-bit builds using Visual C++ versions earlier than 14.1. =back =back =head1 Internal Changes =over 4 =item * A new optimisation phase has been added to the compiler, C<optimize_optree()>, which does a top-down scan of a complete optree just before the peephole optimiser is run. This phase is not currently hookable. =item * An C<OP_MULTICONCAT> op has been added. At C<optimize_optree()> time, a chain of C<OP_CONCAT> and C<OP_CONST> ops, together optionally with an C<OP_STRINGIFY> and/or C<OP_SASSIGN>, are combined into a single C<OP_MULTICONCAT> op. The op is of type C<UNOP_AUX>, and the aux array contains the argument count, plus a pointer to a constant string and a set of segment lengths. For example with my $x = "foo=$foo, bar=$bar\n"; the constant string would be C<"foo=, bar=\n"> and the segment lengths would be (4,6,1). If the string contains characters such as C<\x80>, whose representation changes under utf8, two sets of strings plus lengths are precomputed and stored. =item * Direct access to L<C<PL_keyword_plugin>|perlapi/PL_keyword_plugin> is not safe in the presence of multithreading. A new L<C<wrap_keyword_plugin>|perlapi/wrap_keyword_plugin> function has been added to allow XS modules to safely define custom keywords even when loaded from a thread, analogous to L<C<PL_check>|perlapi/PL_check> / L<C<wrap_op_checker>|perlapi/wrap_op_checker>. =item * The C<PL_statbuf> interpreter variable has been removed. =item * The deprecated function C<to_utf8_case()>, accessible from XS code, has been removed. =item * A new function L<C<is_utf8_invariant_string_loc()>|perlapi/is_utf8_invariant_string_loc> has been added that is like L<C<is_utf8_invariant_string()>|perlapi/is_utf8_invariant_string> but takes an extra pointer parameter into which is stored the location of the first variant character, if any are found. =item * A new function, L<C<Perl_langinfo()>|perlapi/Perl_langinfo> has been added. It is an (almost) drop-in replacement for the system C<nl_langinfo(3)>, but works on platforms that lack that; as well as being more thread-safe, and hiding some gotchas with locale handling from the caller. Code that uses this, needn't use L<C<localeconv(3)>> (and be affected by the gotchas) to find the decimal point, thousands separator, or currency symbol. See L<perlapi/Perl_langinfo>. =item * A new API function L<C<sv_rvunweaken()>|perlapi/sv_rvunweaken> has been added to complement L<C<sv_rvweaken()>|perlapi/sv_rvweaken>. The implementation was taken from L<Scalar::Util/unweaken>. =item * A new flag, C<SORTf_UNSTABLE>, has been added. This will allow a future commit to make mergesort unstable when the user specifies ‘no sort stable’, since it has been decided that mergesort should remain stable by default. =item * XS modules can now automatically get reentrant versions of system functions on threaded perls. By adding #define PERL_REENTRANT near the beginning of an C<XS> file, it will be compiled so that whatever reentrant functions perl knows about on that system will automatically and invisibly be used instead of the plain, non-reentrant versions. For example, if you write C<getpwnam()> in your code, on a system that has C<getpwnam_r()> all calls to the former will be translated invisibly into the latter. This does not happen except on threaded perls, as they aren't needed otherwise. Be aware that which functions have reentrant versions varies from system to system. =item * The C<PERL_NO_OP_PARENT> build define is no longer supported, which means that perl is now always built with C<PERL_OP_PARENT> enabled. =item * The format and content of the non-utf8 transliteration table attached to the C<op_pv> field of C<OP_TRANS>/C<OP_TRANSR> ops has changed. It's now a C<struct OPtrans_map>. =item * A new compiler C<#define>, C<dTHX_DEBUGGING>. has been added. This is useful for XS or C code that only need the thread context because their debugging statements that get compiled only under C<-DDEBUGGING> need one. =item * A new API function L<perlapi/Perl_setlocale> has been added. =item * L<perlapi/sync_locale> has been revised to return a boolean as to whether the system was using the global locale or not. =item * A new kind of magic scalar, called a "nonelem" scalar, has been introduced. It is stored in an array to denote a non-existent element, whenever such an element is accessed in a potential lvalue context. It replaces the existing "defelem" (deferred element) magic wherever this is possible, being significantly more efficient. This means that C<some_sub($sparse_array[$nonelem])> no longer has to create a new magic defelem scalar each time, as long as the element is within the array. It partially fixes the rare bug of deferred elements getting out of synch with their arrays when the array is shifted or unshifted. L<[perl #132729]|https://rt.perl.org/Ticket/Display.html?id=132729> =back =head1 Selected Bug Fixes =over 4 =item * List assignment (C<aassign>) could in some rare cases allocate an entry on the mortals stack and leave the entry uninitialized, leading to possible crashes. L<[perl #131570]|https://rt.perl.org/Ticket/Display.html?id=131570> =item * Attempting to apply an attribute to an C<our> variable where a function of that name already exists could result in a NULL pointer being supplied where an SV was expected, crashing perl. L<[perl #131597]|https://rt.perl.org/Ticket/Display.html?id=131597> =item * C<split ' '> now correctly handles the argument being split when in the scope of the L<< C<unicode_strings>|feature/"The 'unicode_strings' feature" >> feature. Previously, when a string using the single-byte internal representation contained characters that are whitespace by Unicode rules but not by ASCII rules, it treated those characters as part of fields rather than as field separators. L<[perl #130907]|https://rt.perl.org/Ticket/Display.html?id=130907> =item * Several built-in functions previously had bugs that could cause them to write to the internal stack without allocating room for the item being written. In rare situations, this could have led to a crash. These bugs have now been fixed, and if any similar bugs are introduced in future, they will be detected automatically in debugging builds. These internal stack usage checks introduced are also done by the C<entersub> operator when calling XSUBs. This means we can report which XSUB failed to allocate enough stack space. L<[perl #131975]|https://rt.perl.org/Public/Bug/Display.html?id=131975> =item * Using a symbolic ref with postderef syntax as the key in a hash lookup was yielding an assertion failure on debugging builds. L<[perl #131627]|https://rt.perl.org/Ticket/Display.html?id=131627> =item * Array and hash variables whose names begin with a caret now admit indexing inside their curlies when interpolated into strings, as in C<< "${^CAPTURE[0]}" >> to index C<@{^CAPTURE}>. L<[perl #131664]|https://rt.perl.org/Ticket/Display.html?id=131664> =item * Fetching the name of a glob that was previously UTF-8 but wasn't any longer would return that name flagged as UTF-8. L<[perl #131263]|https://rt.perl.org/Ticket/Display.html?id=131263> =item * The perl C<sprintf()> function (via the underlying C function C<Perl_sv_vcatpvfn_flags()>) has been heavily reworked to fix many minor bugs, including the integer wrapping of large width and precision specifiers and potential buffer overruns. It has also been made faster in many cases. =item * Exiting from an C<eval>, whether normally or via an exception, now always frees temporary values (possibly calling destructors) I<before> setting C<$@>. For example: sub DESTROY { eval { die "died in DESTROY"; } } eval { bless []; }; # $@ used to be equal to "died in DESTROY" here; it's now "". =item * Fixed a duplicate symbol failure with C<-flto -mieee-fp> builds. F<pp.c> defined C<_LIB_VERSION> which C<-lieee> already defines. L<[perl #131786]|https://rt.perl.org/Ticket/Display.html?id=131786> =item * The tokenizer no longer consumes the exponent part of a floating point number if it's incomplete. L<[perl #131725]|https://rt.perl.org/Ticket/Display.html?id=131725> =item * On non-threaded builds, for C<m/$null/> where C<$null> is an empty string is no longer treated as if the C</o> flag was present when the previous matching match operator included the C</o> flag. The rewriting used to implement this behavior could confuse the interpreter. This matches the behaviour of threaded builds. L<[perl #124368]|https://rt.perl.org/Ticket/Display.html?id=124368> =item * Parsing a C<sub> definition could cause a use after free if the C<sub> keyword was followed by whitespace including newlines (and comments.) L<[perl #131836]|https://rt.perl.org/Public/Bug/Display.html?id=131836> =item * The tokenizer now correctly adjusts a parse pointer when skipping whitespace in a C<< ${identifier} >> construct. L<[perl #131949]|https://rt.perl.org/Public/Bug/Display.html?id=131949> =item * Accesses to C<${^LAST_FH}> no longer assert after using any of a variety of I/O operations on a non-glob. L<[perl #128263]|https://rt.perl.org/Public/Bug/Display.html?id=128263> =item * The XS-level C<Copy()>, C<Move()>, C<Zero()> macros and their variants now assert if the pointers supplied are C<NULL>. ISO C considers supplying NULL pointers to the functions these macros are built upon as undefined behaviour even when their count parameters are zero. Based on these assertions and the original bug report three macro calls were made conditional. L<[perl #131746]|https://rt.perl.org/Public/Bug/Display.html?id=131746> L<[perl #131892]|https://rt.perl.org/Public/Bug/Display.html?id=131892> =item * Only the C<=> operator is permitted for defining defaults for parameters in subroutine signatures. Previously other assignment operators, e.g. C<+=>, were also accidentally permitted. L<[perl #131777]|https://rt.perl.org/Public/Bug/Display.html?id=131777> =item * Package names are now always included in C<:prototype> warnings L<[perl #131833]|https://rt.perl.org/Public/Bug/Display.html?id=131833> =item * The C<je_old_stack_hwm> field, previously only found in the C<jmpenv> structure on debugging builds, has been added to non-debug builds as well. This fixes an issue with some CPAN modules caused by the size of this structure varying between debugging and non-debugging builds. L<[perl #131942]|https://rt.perl.org/Public/Bug/Display.html?id=131942> =item * The arguments to the C<ninstr()> macro are now correctly parenthesized. =item * A NULL pointer dereference in the C<S_regmatch()> function has been fixed. L<[perl #132017]|https://rt.perl.org/Public/Bug/Display.html?id=132017> =item * Calling L<exec PROGRAM LIST|perlfunc/exec PROGRAM LIST> with an empty C<LIST> has been fixed. This should call C<execvp()> with an empty C<argv> array (containing only the terminating C<NULL> pointer), but was instead just returning false (and not setting L<C<$!>|perlvar/$!>). L<[perl #131730]|https://rt.perl.org/Public/Bug/Display.html?id=131730> =item * The C<gv_fetchmeth_sv> C function stopped working properly in Perl 5.22 when fetching a constant with a UTF-8 name if that constant subroutine was stored in the stash as a simple scalar reference, rather than a full typeglob. This has been corrected. =item * Single-letter debugger commands followed by an argument which starts with punctuation (e.g. C<p$^V> and C<x@ARGV>) now work again. They had been wrongly requiring a space between the command and the argument. L<[perl #120174]|https://rt.perl.org/Public/Bug/Display.html?id=120174> =item * L<splice|perlfunc/splice ARRAY,OFFSET,LENGTH,LIST> now throws an exception ("Modification of a read-only value attempted") when modifying a read-only array. Until now it had been silently modifying the array. The new behaviour is consistent with the behaviour of L<push|perlfunc/push ARRAY,LIST> and L<unshift|perlfunc/unshift ARRAY,LIST>. L<[perl #131000]|https://rt.perl.org/Public/Bug/Display.html?id=131000> =item * C<stat()>, C<lstat()>, and file test operators now fail if given a filename containing a nul character, in the same way that C<open()> already fails. =item * C<stat()>, C<lstat()>, and file test operators now reliably set C<$!> when failing due to being applied to a closed or otherwise invalid file handle. =item * File test operators for Unix permission bits that don't exist on a particular platform, such as C<-k> (sticky bit) on Windows, now check that the file being tested exists before returning the blanket false result, and yield the appropriate errors if the argument doesn't refer to a file. =item * Fixed a 'read before buffer' overrun when parsing a range starting with C<\N{}> at the beginning of the character set for the transliteration operator. L<[perl #132245]|https://rt.perl.org/Ticket/Display.html?id=132245> =item * Fixed a leaked scalar when parsing an empty C<\N{}> at compile-time. L<[perl #132245]|https://rt.perl.org/Ticket/Display.html?id=132245> =item * Calling C<do $path> on a directory or block device now yields a meaningful error code in C<$!>. L<[perl #125774]|https://rt.perl.org/Ticket/Display.html?id=125774> =item * Regexp substitution using an overloaded replacement value that provides a tainted stringification now correctly taints the resulting string. L<[perl #115266]|https://rt.perl.org/Ticket/Display.html?id=115266> =item * Lexical sub declarations in C<do> blocks such as C<do { my sub lex; 123 }> could corrupt the stack, erasing items already on the stack in the enclosing statement. This has been fixed. L<[perl #132442]|https://rt.perl.org/Ticket/Display.html?id=132442> =item * C<pack> and C<unpack> can now handle repeat counts and lengths that exceed two billion. L<[perl #119367]|https://rt.perl.org/Ticket/Display.html?id=119367> =item * Digits past the radix point in octal and binary floating point literals now have the correct weight on platforms where a floating point significand doesn't fit into an integer type. =item * The canonical truth value no longer has a spurious special meaning as a callable subroutine. It used to be a magic placeholder for a missing C<import> or C<unimport> method, but is now treated like any other string C<1>. L<[perl #126042]|https://rt.perl.org/Ticket/Display.html?id=126042> =item * C<system> now reduces its arguments to strings in the parent process, so any effects of stringifying them (such as overload methods being called or warnings being emitted) are visible in the way the program expects. L<[perl #121105]|https://rt.perl.org/Ticket/Display.html?id=121105> =item * The C<readpipe()> built-in function now checks at compile time that it has only one parameter expression, and puts it in scalar context, thus ensuring that it doesn't corrupt the stack at runtime. L<[perl #4574]|https://rt.perl.org/Ticket/Display.html?id=4574> =item * C<sort> now performs correct reference counting when aliasing C<$a> and C<$b>, thus avoiding premature destruction and leakage of scalars if they are re-aliased during execution of the sort comparator. L<[perl #92264]|https://rt.perl.org/Ticket/Display.html?id=92264> =item * C<reverse> with no operand, reversing C<$_> by default, is no longer in danger of corrupting the stack. L<[perl #132544]|https://rt.perl.org/Ticket/Display.html?id=132544> =item * C<exec>, C<system>, et al are no longer liable to have their argument lists corrupted by reentrant calls and by magic such as tied scalars. L<[perl #129888]|https://rt.perl.org/Ticket/Display.html?id=129888> =item * Perl's own C<malloc> no longer gets confused by attempts to allocate more than a gigabyte on a 64-bit platform. L<[perl #119829]|https://rt.perl.org/Ticket/Display.html?id=119829> =item * Stacked file test operators in a sort comparator expression no longer cause a crash. L<[perl #129347]|https://rt.perl.org/Ticket/Display.html?id=129347> =item * An identity C<tr///> transformation on a reference is no longer mistaken for that reference for the purposes of deciding whether it can be assigned to. L<[perl #130578]|https://rt.perl.org/Ticket/Display.html?id=130578> =item * Lengthy hexadecimal, octal, or binary floating point literals no longer cause undefined behaviour when parsing digits that are of such low significance that they can't affect the floating point value. L<[perl #131894]|https://rt.perl.org/Ticket/Display.html?id=131894> =item * C<open $$scalarref...> and similar invocations no longer leak the file handle. L<[perl #115814]|https://rt.perl.org/Ticket/Display.html?id=115814> =item * Some convoluted kinds of regexp no longer cause an arithmetic overflow when compiled. L<[perl #131893]|https://rt.perl.org/Ticket/Display.html?id=131893> =item * The default typemap, by avoiding C<newGVgen>, now no longer leaks when XSUBs return file handles (C<PerlIO *> or C<FILE *>). L<[perl #115814]|https://rt.perl.org/Ticket/Display.html?id=115814> =item * Creating a C<BEGIN> block as an XS subroutine with a prototype no longer crashes because of the early freeing of the subroutine. =item * The C<printf> format specifier C<%.0f> no longer rounds incorrectly L<[perl #47602]|https://rt.perl.org/Ticket/Display.html?id=47602>, and now shows the correct sign for a negative zero. =item * Fixed an issue where the error C<< Scalar value @arrayname[0] better written as $arrayname >> would give an error C<< Cannot printf Inf with 'c' >> when arrayname starts with C<< Inf >>. L<[perl #132645]|https://rt.perl.org/Ticket/Display.html?id=132645> =item * The Perl implementation of C<< getcwd() >> in C<< Cwd >> in the PathTools distribution now behaves the same as XS implementation on errors: it returns an error, and sets C<< $! >>. L<[perl #132648]|https://rt.perl.org/Ticket/Display.html?id=132648> =item * Vivify array elements when putting them on the stack. Fixes L<[perl #8910]|https://rt.perl.org/Ticket/Display.html?id=8910> (reported in April 2002). =item * Fixed parsing of braced subscript after parens. Fixes L<[perl #8045]|https://rt.perl.org/Ticket/Display.html?id=8045> (reported in December 2001). =item * C<tr/non_utf8/long_non_utf8/c> could give the wrong results when the length of the replacement character list was greater than 0x7fff. =item * C<tr/non_utf8/non_utf8/cd> failed to add the implied C<\x{100}-\x{7fffffff}> to the search character list. =item * Compilation failures within "perl-within-perl" constructs, such as with string interpolation and the right part of C<s///e>, now cause compilation to abort earlier. Previously compilation could continue in order to report other errors, but the failed sub-parse could leave partly parsed constructs on the parser shift-reduce stack, confusing the parser, leading to perl crashes. L<[perl #125351]|https://rt.perl.org/Ticket/Display.html?id=125351> =item * On threaded perls where the decimal point (radix) character is not a dot, it has been possible for a race to occur between threads when one needs to use the real radix character (such as with C<sprintf>). This has now been fixed by use of a mutex on systems without thread-safe locales, and the problem just doesn't come up on those with thread-safe locales. =item * Errors while compiling a regex character class could sometime trigger an assertion failure. L<[perl #132163]|https://rt.perl.org/Ticket/Display.html?id=132163> =back =head1 Acknowledgements Perl 5.28.0 represents approximately 13 months of development since Perl 5.26.0 and contains approximately 730,000 lines of changes across 2,200 files from 77 authors. Excluding auto-generated files, documentation and release tools, there were approximately 580,000 lines of changes to 1,300 .pm, .t, .c and .h files. Perl continues to flourish into its fourth decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.28.0: Aaron Crane, Abigail, Ævar Arnfjörð Bjarmason, Alberto Simões, Alexandr Savca, Andrew Fresh, Andy Dougherty, Andy Lester, Aristotle Pagaltzis, Ask Bjørn Hansen, Chris 'BinGOs' Williams, Craig A. Berry, Dagfinn Ilmari Mannsåker, Dan Collins, Daniel Dragan, David Cantrell, David Mitchell, Dmitry Ulanov, Dominic Hargreaves, E. Choroba, Eric Herman, Eugen Konkov, Father Chrysostomos, Gene Sullivan, George Hartzell, Graham Knop, Harald Jörg, H.Merijn Brand, Hugo van der Sanden, Jacques Germishuys, James E Keenan, Jarkko Hietaniemi, Jerry D. Hedden, J. Nick Koston, John Lightsey, John Peacock, John P. Linderman, John SJ Anderson, Karen Etheridge, Karl Williamson, Ken Brown, Ken Cotterill, Leon Timmermans, Lukas Mai, Marco Fontani, Marc-Philip Werner, Matthew Horsfall, Neil Bowers, Nicholas Clark, Nicolas R., Niko Tyni, Pali, Paul Marquess, Peter John Acklam, Reini Urban, Renee Baecker, Ricardo Signes, Robin Barker, Sawyer X, Scott Lanning, Sergey Aleynikov, Shirakata Kentaro, Shoichi Kaji, Slaven Rezic, Smylers, Steffen Müller, Steve Hay, Sullivan Beck, Thomas Sibley, Todd Rinaldo, Tomasz Konojacki, Tom Hukins, Tom Wyant, Tony Cook, Vitali Peil, Yves Orton, Zefram. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the perl bug database at L<https://rt.perl.org/> . There may also be information at L<http://www.perl.org/> , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications which make it inappropriate to send to a publicly archived mailing list, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 Give Thanks If you wish to thank the Perl 5 Porters for the work we had done in Perl 5, you can do so by running the C<perlthanks> program: perlthanks This will send an email to the Perl 5 Porters list with your show of thanks. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlform.pod 0000644 00000040340 15125556335 0007111 0 ustar 00 =head1 NAME X<format> X<report> X<chart> perlform - Perl formats =head1 DESCRIPTION Perl has a mechanism to help you generate simple reports and charts. To facilitate this, Perl helps you code up your output page close to how it will look when it's printed. It can keep track of things like how many lines are on a page, what page you're on, when to print page headers, etc. Keywords are borrowed from FORTRAN: format() to declare and write() to execute; see their entries in L<perlfunc>. Fortunately, the layout is much more legible, more like BASIC's PRINT USING statement. Think of it as a poor man's nroff(1). X<nroff> Formats, like packages and subroutines, are declared rather than executed, so they may occur at any point in your program. (Usually it's best to keep them all together though.) They have their own namespace apart from all the other "types" in Perl. This means that if you have a function named "Foo", it is not the same thing as having a format named "Foo". However, the default name for the format associated with a given filehandle is the same as the name of the filehandle. Thus, the default format for STDOUT is named "STDOUT", and the default format for filehandle TEMP is named "TEMP". They just look the same. They aren't. Output record formats are declared as follows: format NAME = FORMLIST . If the name is omitted, format "STDOUT" is defined. A single "." in column 1 is used to terminate a format. FORMLIST consists of a sequence of lines, each of which may be one of three types: =over 4 =item 1. A comment, indicated by putting a '#' in the first column. =item 2. A "picture" line giving the format for one output line. =item 3. An argument line supplying values to plug into the previous picture line. =back Picture lines contain output field definitions, intermingled with literal text. These lines do not undergo any kind of variable interpolation. Field definitions are made up from a set of characters, for starting and extending a field to its desired width. This is the complete set of characters for field definitions: X<format, picture line> X<@> X<^> X<< < >> X<< | >> X<< > >> X<#> X<0> X<.> X<...> X<@*> X<^*> X<~> X<~~> @ start of regular field ^ start of special field < pad character for left justification | pad character for centering > pad character for right justification # pad character for a right-justified numeric field 0 instead of first #: pad number with leading zeroes . decimal point within a numeric field ... terminate a text field, show "..." as truncation evidence @* variable width field for a multi-line value ^* variable width field for next line of a multi-line value ~ suppress line with all fields empty ~~ repeat line until all fields are exhausted Each field in a picture line starts with either "@" (at) or "^" (caret), indicating what we'll call, respectively, a "regular" or "special" field. The choice of pad characters determines whether a field is textual or numeric. The tilde operators are not part of a field. Let's look at the various possibilities in detail. =head2 Text Fields X<format, text field> The length of the field is supplied by padding out the field with multiple "E<lt>", "E<gt>", or "|" characters to specify a non-numeric field with, respectively, left justification, right justification, or centering. For a regular field, the value (up to the first newline) is taken and printed according to the selected justification, truncating excess characters. If you terminate a text field with "...", three dots will be shown if the value is truncated. A special text field may be used to do rudimentary multi-line text block filling; see L</Using Fill Mode> for details. Example: format STDOUT = @<<<<<< @|||||| @>>>>>> "left", "middle", "right" . Output: left middle right =head2 Numeric Fields X<#> X<format, numeric field> Using "#" as a padding character specifies a numeric field, with right justification. An optional "." defines the position of the decimal point. With a "0" (zero) instead of the first "#", the formatted number will be padded with leading zeroes if necessary. A special numeric field is blanked out if the value is undefined. If the resulting value would exceed the width specified the field is filled with "#" as overflow evidence. Example: format STDOUT = @### @.### @##.### @### @### ^#### 42, 3.1415, undef, 0, 10000, undef . Output: 42 3.142 0.000 0 #### =head2 The Field @* for Variable-Width Multi-Line Text X<@*> The field "@*" can be used for printing multi-line, nontruncated values; it should (but need not) appear by itself on a line. A final line feed is chomped off, but all other characters are emitted verbatim. =head2 The Field ^* for Variable-Width One-line-at-a-time Text X<^*> Like "@*", this is a variable-width field. The value supplied must be a scalar variable. Perl puts the first line (up to the first "\n") of the text into the field, and then chops off the front of the string so that the next time the variable is referenced, more of the text can be printed. The variable will I<not> be restored. Example: $text = "line 1\nline 2\nline 3"; format STDOUT = Text: ^* $text ~~ ^* $text . Output: Text: line 1 line 2 line 3 =head2 Specifying Values X<format, specifying values> The values are specified on the following format line in the same order as the picture fields. The expressions providing the values must be separated by commas. They are all evaluated in a list context before the line is processed, so a single list expression could produce multiple list elements. The expressions may be spread out to more than one line if enclosed in braces. If so, the opening brace must be the first token on the first line. If an expression evaluates to a number with a decimal part, and if the corresponding picture specifies that the decimal part should appear in the output (that is, any picture except multiple "#" characters B<without> an embedded "."), the character used for the decimal point is determined by the current LC_NUMERIC locale if C<use locale> is in effect. This means that, if, for example, the run-time environment happens to specify a German locale, "," will be used instead of the default ".". See L<perllocale> and L</"WARNINGS"> for more information. =head2 Using Fill Mode X<format, fill mode> On text fields the caret enables a kind of fill mode. Instead of an arbitrary expression, the value supplied must be a scalar variable that contains a text string. Perl puts the next portion of the text into the field, and then chops off the front of the string so that the next time the variable is referenced, more of the text can be printed. (Yes, this means that the variable itself is altered during execution of the write() call, and is not restored.) The next portion of text is determined by a crude line-breaking algorithm. You may use the carriage return character (C<\r>) to force a line break. You can change which characters are legal to break on by changing the variable C<$:> (that's $FORMAT_LINE_BREAK_CHARACTERS if you're using the English module) to a list of the desired characters. Normally you would use a sequence of fields in a vertical stack associated with the same scalar variable to print out a block of text. You might wish to end the final field with the text "...", which will appear in the output if the text was too long to appear in its entirety. =head2 Suppressing Lines Where All Fields Are Void X<format, suppressing lines> Using caret fields can produce lines where all fields are blank. You can suppress such lines by putting a "~" (tilde) character anywhere in the line. The tilde will be translated to a space upon output. =head2 Repeating Format Lines X<format, repeating lines> If you put two contiguous tilde characters "~~" anywhere into a line, the line will be repeated until all the fields on the line are exhausted, i.e. undefined. For special (caret) text fields this will occur sooner or later, but if you use a text field of the at variety, the expression you supply had better not give the same value every time forever! (C<shift(@f)> is a simple example that would work.) Don't use a regular (at) numeric field in such lines, because it will never go blank. =head2 Top of Form Processing X<format, top of form> X<top> X<header> Top-of-form processing is by default handled by a format with the same name as the current filehandle with "_TOP" concatenated to it. It's triggered at the top of each page. See L<perlfunc/write>. Examples: # a report on the /etc/passwd file format STDOUT_TOP = Passwd File Name Login Office Uid Gid Home ------------------------------------------------------------------ . format STDOUT = @<<<<<<<<<<<<<<<<<< @||||||| @<<<<<<@>>>> @>>>> @<<<<<<<<<<<<<<<<< $name, $login, $office,$uid,$gid, $home . # a report from a bug report form format STDOUT_TOP = Bug Reports @<<<<<<<<<<<<<<<<<<<<<<< @||| @>>>>>>>>>>>>>>>>>>>>>>> $system, $%, $date ------------------------------------------------------------------ . format STDOUT = Subject: @<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< $subject Index: @<<<<<<<<<<<<<<<<<<<<<<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<< $index, $description Priority: @<<<<<<<<<< Date: @<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<< $priority, $date, $description From: @<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<< $from, $description Assigned to: @<<<<<<<<<<<<<<<<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<< $programmer, $description ~ ^<<<<<<<<<<<<<<<<<<<<<<<<<<<< $description ~ ^<<<<<<<<<<<<<<<<<<<<<<<<<<<< $description ~ ^<<<<<<<<<<<<<<<<<<<<<<<<<<<< $description ~ ^<<<<<<<<<<<<<<<<<<<<<<<<<<<< $description ~ ^<<<<<<<<<<<<<<<<<<<<<<<... $description . It is possible to intermix print()s with write()s on the same output channel, but you'll have to handle C<$-> (C<$FORMAT_LINES_LEFT>) yourself. =head2 Format Variables X<format variables> X<format, variables> The current format name is stored in the variable C<$~> (C<$FORMAT_NAME>), and the current top of form format name is in C<$^> (C<$FORMAT_TOP_NAME>). The current output page number is stored in C<$%> (C<$FORMAT_PAGE_NUMBER>), and the number of lines on the page is in C<$=> (C<$FORMAT_LINES_PER_PAGE>). Whether to autoflush output on this handle is stored in C<$|> (C<$OUTPUT_AUTOFLUSH>). The string output before each top of page (except the first) is stored in C<$^L> (C<$FORMAT_FORMFEED>). These variables are set on a per-filehandle basis, so you'll need to select() into a different one to affect them: select((select(OUTF), $~ = "My_Other_Format", $^ = "My_Top_Format" )[0]); Pretty ugly, eh? It's a common idiom though, so don't be too surprised when you see it. You can at least use a temporary variable to hold the previous filehandle: (this is a much better approach in general, because not only does legibility improve, you now have an intermediary stage in the expression to single-step the debugger through): $ofh = select(OUTF); $~ = "My_Other_Format"; $^ = "My_Top_Format"; select($ofh); If you use the English module, you can even read the variable names: use English; $ofh = select(OUTF); $FORMAT_NAME = "My_Other_Format"; $FORMAT_TOP_NAME = "My_Top_Format"; select($ofh); But you still have those funny select()s. So just use the FileHandle module. Now, you can access these special variables using lowercase method names instead: use FileHandle; format_name OUTF "My_Other_Format"; format_top_name OUTF "My_Top_Format"; Much better! =head1 NOTES Because the values line may contain arbitrary expressions (for at fields, not caret fields), you can farm out more sophisticated processing to other functions, like sprintf() or one of your own. For example: format Ident = @<<<<<<<<<<<<<<< &commify($n) . To get a real at or caret into the field, do this: format Ident = I have an @ here. "@" . To center a whole line of text, do something like this: format Ident = @||||||||||||||||||||||||||||||||||||||||||||||| "Some text line" . There is no builtin way to say "float this to the right hand side of the page, however wide it is." You have to specify where it goes. The truly desperate can generate their own format on the fly, based on the current number of columns, and then eval() it: $format = "format STDOUT = \n" . '^' . '<' x $cols . "\n" . '$entry' . "\n" . "\t^" . "<" x ($cols-8) . "~~\n" . '$entry' . "\n" . ".\n"; print $format if $Debugging; eval $format; die $@ if $@; Which would generate a format looking something like this: format STDOUT = ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< $entry ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<~~ $entry . Here's a little program that's somewhat like fmt(1): format = ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ~~ $_ . $/ = ''; while (<>) { s/\s*\n\s*/ /g; write; } =head2 Footers X<format, footer> X<footer> While $FORMAT_TOP_NAME contains the name of the current header format, there is no corresponding mechanism to automatically do the same thing for a footer. Not knowing how big a format is going to be until you evaluate it is one of the major problems. It's on the TODO list. Here's one strategy: If you have a fixed-size footer, you can get footers by checking $FORMAT_LINES_LEFT before each write() and print the footer yourself if necessary. Here's another strategy: Open a pipe to yourself, using C<open(MYSELF, "|-")> (see L<perlfunc/open>) and always write() to MYSELF instead of STDOUT. Have your child process massage its STDIN to rearrange headers and footers however you like. Not very convenient, but doable. =head2 Accessing Formatting Internals X<format, internals> For low-level access to the formatting mechanism, you may use formline() and access C<$^A> (the $ACCUMULATOR variable) directly. For example: $str = formline <<'END', 1,2,3; @<<< @||| @>>> END print "Wow, I just stored '$^A' in the accumulator!\n"; Or to make an swrite() subroutine, which is to write() what sprintf() is to printf(), do this: use Carp; sub swrite { croak "usage: swrite PICTURE ARGS" unless @_; my $format = shift; $^A = ""; formline($format,@_); return $^A; } $string = swrite(<<'END', 1, 2, 3); Check me out @<<< @||| @>>> END print $string; =head1 WARNINGS The lone dot that ends a format can also prematurely end a mail message passing through a misconfigured Internet mailer (and based on experience, such misconfiguration is the rule, not the exception). So when sending format code through mail, you should indent it so that the format-ending dot is not on the left margin; this will prevent SMTP cutoff. Lexical variables (declared with "my") are not visible within a format unless the format is declared within the scope of the lexical variable. If a program's environment specifies an LC_NUMERIC locale and C<use locale> is in effect when the format is declared, the locale is used to specify the decimal point character in formatted output. Formatted output cannot be controlled by C<use locale> at the time when write() is called. See L<perllocale> for further discussion of locale handling. Within strings that are to be displayed in a fixed-length text field, each control character is substituted by a space. (But remember the special meaning of C<\r> when using fill mode.) This is done to avoid misalignment when control characters "disappear" on some output media. perl587delta.pod 0000644 00000020245 15125556335 0007505 0 ustar 00 =head1 NAME perl587delta - what is new for perl v5.8.7 =head1 DESCRIPTION This document describes differences between the 5.8.6 release and the 5.8.7 release. =head1 Incompatible Changes There are no changes incompatible with 5.8.6. =head1 Core Enhancements =head2 Unicode Character Database 4.1.0 The copy of the Unicode Character Database included in Perl 5.8 has been updated to 4.1.0 from 4.0.1. See L<http://www.unicode.org/versions/Unicode4.1.0/#NotableChanges> for the notable changes. =head2 suidperl less insecure A pair of exploits in C<suidperl> involving debugging code have been closed. For new projects the core perl team strongly recommends that you use dedicated, single purpose security tools such as C<sudo> in preference to C<suidperl>. =head2 Optional site customization script The perl interpreter can be built to allow the use of a site customization script. By default this is not enabled, to be consistent with previous perl releases. To use this, add C<-Dusesitecustomize> to the command line flags when running the C<Configure> script. See also L<perlrun/-f>. =head2 C<Config.pm> is now much smaller. C<Config.pm> is now about 3K rather than 32K, with the infrequently used code and C<%Config> values loaded on demand. This is transparent to the programmer, but means that most code will save parsing and loading 29K of script (for example, code that uses C<File::Find>). =head1 Modules and Pragmata =over 4 =item * B upgraded to version 1.09 =item * base upgraded to version 2.07 =item * bignum upgraded to version 0.17 =item * bytes upgraded to version 1.02 =item * Carp upgraded to version 1.04 =item * CGI upgraded to version 3.10 =item * Class::ISA upgraded to version 0.33 =item * Data::Dumper upgraded to version 2.121_02 =item * DB_File upgraded to version 1.811 =item * Devel::PPPort upgraded to version 3.06 =item * Digest upgraded to version 1.10 =item * Encode upgraded to version 2.10 =item * FileCache upgraded to version 1.05 =item * File::Path upgraded to version 1.07 =item * File::Temp upgraded to version 0.16 =item * IO::File upgraded to version 1.11 =item * IO::Socket upgraded to version 1.28 =item * Math::BigInt upgraded to version 1.77 =item * Math::BigRat upgraded to version 0.15 =item * overload upgraded to version 1.03 =item * PathTools upgraded to version 3.05 =item * Pod::HTML upgraded to version 1.0503 =item * Pod::Perldoc upgraded to version 3.14 =item * Pod::LaTeX upgraded to version 0.58 =item * Pod::Parser upgraded to version 1.30 =item * Symbol upgraded to version 1.06 =item * Term::ANSIColor upgraded to version 1.09 =item * Test::Harness upgraded to version 2.48 =item * Test::Simple upgraded to version 0.54 =item * Text::Wrap upgraded to version 2001.09293, to fix a bug when wrap() was called with a non-space separator. =item * threads::shared upgraded to version 0.93 =item * Time::HiRes upgraded to version 1.66 =item * Time::Local upgraded to version 1.11 =item * Unicode::Normalize upgraded to version 0.32 =item * utf8 upgraded to version 1.05 =item * Win32 upgraded to version 0.24, which provides Win32::GetFileVersion =back =head1 Utility Changes =head2 find2perl enhancements C<find2perl> has new options C<-iname>, C<-path> and C<-ipath>. =head1 Performance Enhancements The internal pointer mapping hash used during ithreads cloning now uses an arena for memory allocation. In tests this reduced ithreads cloning time by about 10%. =head1 Installation and Configuration Improvements =over 4 =item * The Win32 "dmake" makefile.mk has been updated to make it compatible with the latest versions of dmake. =item * C<PERL_MALLOC>, C<DEBUG_MSTATS>, C<PERL_HASH_SEED_EXPLICIT> and C<NO_HASH_SEED> should now work in Win32 makefiles. =back =head1 Selected Bug Fixes =over 4 =item * The socket() function on Win32 has been fixed so that it is able to use transport providers which specify a protocol of 0 (meaning any protocol is allowed) once more. (This was broken in 5.8.6, and typically caused the use of ICMP sockets to fail.) =item * Another obscure bug involving C<substr> and UTF-8 caused by bad internal offset caching has been identified and fixed. =item * A bug involving the loading of UTF-8 tables by the regexp engine has been fixed - code such as C<"\x{100}" =~ /[[:print:]]/> will no longer give corrupt results. =item * Case conversion operations such as C<uc> on a long Unicode string could exhaust memory. This has been fixed. =item * C<index>/C<rindex> were buggy for some combinations of Unicode and non-Unicode data. This has been fixed. =item * C<read> (and presumably C<sysread>) would expose the UTF-8 internals when reading from a byte oriented file handle into a UTF-8 scalar. This has been fixed. =item * Several C<pack>/C<unpack> bug fixes: =over 4 =item * Checksums with C<b> or C<B> formats were broken. =item * C<unpack> checksums could overflow with the C<C> format. =item * C<U0> and C<C0> are now scoped to C<()> C<pack> sub-templates. =item * Counted length prefixes now don't change C<C0>/C<U0> mode. =item * C<pack> C<Z0> used to destroy the preceding character. =item * C<P>/C<p> C<pack> formats used to only recognise literal C<undef> =back =item * Using closures with ithreads could cause perl to crash. This was due to failure to correctly lock internal OP structures, and has been fixed. =item * The return value of C<close> now correctly reflects any file errors that occur while flushing the handle's data, instead of just giving failure if the actual underlying file close operation failed. =item * C<not() || 1> used to segfault. C<not()> now behaves like C<not(0)>, which was the pre 5.6.0 behaviour. =item * C<h2ph> has various enhancements to cope with constructs in header files that used to result in incorrect or invalid output. =back =head1 New or Changed Diagnostics There is a new taint error, "%ENV is aliased to %s". This error is thrown when taint checks are enabled and when C<*ENV> has been aliased, so that C<%ENV> has no env-magic anymore and hence the environment cannot be verified as taint-free. The internals of C<pack> and C<unpack> have been updated. All legitimate templates should work as before, but there may be some changes in the error reported for complex failure cases. Any behaviour changes for non-error cases are bugs, and should be reported. =head1 Changed Internals There has been a fair amount of refactoring of the C<C> source code, partly to make it tidier and more maintainable. The resulting object code and the C<perl> binary may well be smaller than 5.8.6, and hopefully faster in some cases, but apart from this there should be no user-detectable changes. C<${^UTF8LOCALE}> has been added to give perl space access to C<PL_utf8locale>. The size of the arenas used to allocate SV heads and most SV bodies can now be changed at compile time. The old size was 1008 bytes, the new default size is 4080 bytes. =head1 Known Problems Unicode strings returned from overloaded operators can be buggy. This is a long standing bug reported since 5.8.6 was released, but we do not yet have a suitable fix for it. =head1 Platform Specific Problems On UNICOS, lib/Math/BigInt/t/bigintc.t hangs burning CPU. ext/B/t/bytecode.t and ext/Socket/t/socketpair.t both fail tests. These are unlikely to be resolved, as our valiant UNICOS porter's last Cray is being decommissioned. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://bugs.perl.org. There may also be information at http://www.perl.org, the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. You can browse and search the Perl 5 bugs at http://bugs.perl.org/ =head1 SEE ALSO The F<Changes> file for exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl5302delta.pod 0000644 00000011112 15125556335 0007544 0 ustar 00 =encoding utf8 =head1 NAME perl5302delta - what is new for perl v5.30.2 =head1 DESCRIPTION This document describes differences between the 5.30.1 release and the 5.30.2 release. If you are upgrading from an earlier release such as 5.30.0, first read L<perl5301delta>, which describes differences between 5.30.0 and 5.30.1. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.30.0. If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Compress::Raw::Bzip2> has been upgraded from version 2.084 to 2.089. =item * L<Module::CoreList> has been upgraded from version 5.20191110 to 5.20200314. =back =head1 Documentation =head2 Changes to Existing Documentation We have attempted to update the documentation to reflect the changes listed in this document. If you find any we have missed, send email to L<https://github.com/Perl/perl5/issues>. =head1 Configuration and Compilation =over 4 =item * GCC 10 is now supported by F<Configure>. =back =head1 Testing Tests were added and changed to reflect the other additions and changes in this release. =head1 Platform Support =head2 Platform-Specific Notes =over 4 =item Windows The MYMALLOC (PERL_MALLOC) build on Windows has been fixed. =back =head1 Selected Bug Fixes =over 4 =item * printf() or sprintf() with the C<%n> format no longer cause a panic on debugging builds, or report an incorrectly cached length value when producing C<SVfUTF8> flagged strings. [L<GH #17221|https://github.com/Perl/perl5/issues/17221>] =item * A memory leak in regular expression patterns has been fixed. [L<GH #17218|https://github.com/Perl/perl5/issues/17218>] =item * A read beyond buffer in grok_infnan has been fixed. [L<GH #17370|https://github.com/Perl/perl5/issues/17370>] =item * An assertion failure in the regular expression engine has been fixed. [L<GH #17372|https://github.com/Perl/perl5/issues/17372>] =item * C<(?{...})> eval groups in regular expressions no longer unintentionally trigger "EVAL without pos change exceeded limit in regex". [L<GH #17490|https://github.com/Perl/perl5/issues/17490>] =back =head1 Acknowledgements Perl 5.30.2 represents approximately 4 months of development since Perl 5.30.1 and contains approximately 2,100 lines of changes across 110 files from 15 authors. Excluding auto-generated files, documentation and release tools, there were approximately 920 lines of changes to 30 .pm, .t, .c and .h files. Perl continues to flourish into its fourth decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.30.2: Chris 'BinGOs' Williams, Dan Book, David Mitchell, Hugo van der Sanden, Karen Etheridge, Karl Williamson, Matthew Horsfall, Nicolas R., Petr Písař, Renee Baecker, Sawyer X, Steve Hay, Tomasz Konojacki, Tony Cook, Yves Orton. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the perl bug database at L<https://rt.perl.org/>. There may also be information at L<http://www.perl.org/>, the Perl Home Page. If you believe you have an unreported bug, please open an issue at L<https://github.com/Perl/perl5/issues>. Be sure to trim your bug down to a tiny but sufficient test case. If the bug you are reporting has security implications which make it inappropriate to send to a public issue tracker, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 Give Thanks If you wish to thank the Perl 5 Porters for the work we had done in Perl 5, you can do so by running the C<perlthanks> program: perlthanks This will send an email to the Perl 5 Porters list with your show of thanks. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlop.pod 0000644 00000442630 15125556335 0006574 0 ustar 00 =head1 NAME X<operator> perlop - Perl operators and precedence =head1 DESCRIPTION In Perl, the operator determines what operation is performed, independent of the type of the operands. For example S<C<$x + $y>> is always a numeric addition, and if C<$x> or C<$y> do not contain numbers, an attempt is made to convert them to numbers first. This is in contrast to many other dynamic languages, where the operation is determined by the type of the first argument. It also means that Perl has two versions of some operators, one for numeric and one for string comparison. For example S<C<$x == $y>> compares two numbers for equality, and S<C<$x eq $y>> compares two strings. There are a few exceptions though: C<x> can be either string repetition or list repetition, depending on the type of the left operand, and C<&>, C<|>, C<^> and C<~> can be either string or numeric bit operations. =head2 Operator Precedence and Associativity X<operator, precedence> X<precedence> X<associativity> Operator precedence and associativity work in Perl more or less like they do in mathematics. I<Operator precedence> means some operators group more tightly than others. For example, in C<2 + 4 * 5>, the multiplication has higher precedence, so C<4 * 5> is grouped together as the right-hand operand of the addition, rather than C<2 + 4> being grouped together as the left-hand operand of the multiplication. It is as if the expression were written C<2 + (4 * 5)>, not C<(2 + 4) * 5>. So the expression yields C<2 + 20 == 22>, rather than C<6 * 5 == 30>. I<Operator associativity> defines what happens if a sequence of the same operators is used one after another: usually that they will be grouped at the left or the right. For example, in C<9 - 3 - 2>, subtraction is left associative, so C<9 - 3> is grouped together as the left-hand operand of the second subtraction, rather than C<3 - 2> being grouped together as the right-hand operand of the first subtraction. It is as if the expression were written C<(9 - 3) - 2>, not C<9 - (3 - 2)>. So the expression yields C<6 - 2 == 4>, rather than C<9 - 1 == 8>. For simple operators that evaluate all their operands and then combine the values in some way, precedence and associativity (and parentheses) imply some ordering requirements on those combining operations. For example, in C<2 + 4 * 5>, the grouping implied by precedence means that the multiplication of 4 and 5 must be performed before the addition of 2 and 20, simply because the result of that multiplication is required as one of the operands of the addition. But the order of operations is not fully determined by this: in C<2 * 2 + 4 * 5> both multiplications must be performed before the addition, but the grouping does not say anything about the order in which the two multiplications are performed. In fact Perl has a general rule that the operands of an operator are evaluated in left-to-right order. A few operators such as C<&&=> have special evaluation rules that can result in an operand not being evaluated at all; in general, the top-level operator in an expression has control of operand evaluation. Some comparison operators, as their associativity, I<chain> with some operators of the same precedence (but never with operators of different precedence). This chaining means that each comparison is performed on the two arguments surrounding it, with each interior argument taking part in two comparisons, and the comparison results are implicitly ANDed. Thus S<C<"$x E<lt> $y E<lt>= $z">> behaves exactly like S<C<"$x E<lt> $y && $y E<lt>= $z">>, assuming that C<"$y"> is as simple a scalar as it looks. The ANDing short-circuits just like C<"&&"> does, stopping the sequence of comparisons as soon as one yields false. In a chained comparison, each argument expression is evaluated at most once, even if it takes part in two comparisons, but the result of the evaluation is fetched for each comparison. (It is not evaluated at all if the short-circuiting means that it's not required for any comparisons.) This matters if the computation of an interior argument is expensive or non-deterministic. For example, if($x < expensive_sub() <= $z) { ... is not entirely like if($x < expensive_sub() && expensive_sub() <= $z) { ... but instead closer to my $tmp = expensive_sub(); if($x < $tmp && $tmp <= $z) { ... in that the subroutine is only called once. However, it's not exactly like this latter code either, because the chained comparison doesn't actually involve any temporary variable (named or otherwise): there is no assignment. This doesn't make much difference where the expression is a call to an ordinary subroutine, but matters more with an lvalue subroutine, or if the argument expression yields some unusual kind of scalar by other means. For example, if the argument expression yields a tied scalar, then the expression is evaluated to produce that scalar at most once, but the value of that scalar may be fetched up to twice, once for each comparison in which it is actually used. In this example, the expression is evaluated only once, and the tied scalar (the result of the expression) is fetched for each comparison that uses it. if ($x < $tied_scalar < $z) { ... In the next example, the expression is evaluated only once, and the tied scalar is fetched once as part of the operation within the expression. The result of that operation is fetched for each comparison, which normally doesn't matter unless that expression result is also magical due to operator overloading. if ($x < $tied_scalar + 42 < $z) { ... Some operators are instead non-associative, meaning that it is a syntax error to use a sequence of those operators of the same precedence. For example, S<C<"$x .. $y .. $z">> is an error. Perl operators have the following associativity and precedence, listed from highest precedence to lowest. Operators borrowed from C keep the same precedence relationship with each other, even where C's precedence is slightly screwy. (This makes learning Perl easier for C folks.) With very few exceptions, these all operate on scalar values only, not array values. left terms and list operators (leftward) left -> nonassoc ++ -- right ** right ! ~ \ and unary + and - left =~ !~ left * / % x left + - . left << >> nonassoc named unary operators chained < > <= >= lt gt le ge chain/na == != eq ne <=> cmp ~~ nonassoc isa left & left | ^ left && left || // nonassoc .. ... right ?: right = += -= *= etc. goto last next redo dump left , => nonassoc list operators (rightward) right not left and left or xor In the following sections, these operators are covered in detail, in the same order in which they appear in the table above. Many operators can be overloaded for objects. See L<overload>. =head2 Terms and List Operators (Leftward) X<list operator> X<operator, list> X<term> A TERM has the highest precedence in Perl. They include variables, quote and quote-like operators, any expression in parentheses, and any function whose arguments are parenthesized. Actually, there aren't really functions in this sense, just list operators and unary operators behaving as functions because you put parentheses around the arguments. These are all documented in L<perlfunc>. If any list operator (C<print()>, etc.) or any unary operator (C<chdir()>, etc.) is followed by a left parenthesis as the next token, the operator and arguments within parentheses are taken to be of highest precedence, just like a normal function call. In the absence of parentheses, the precedence of list operators such as C<print>, C<sort>, or C<chmod> is either very high or very low depending on whether you are looking at the left side or the right side of the operator. For example, in @ary = (1, 3, sort 4, 2); print @ary; # prints 1324 the commas on the right of the C<sort> are evaluated before the C<sort>, but the commas on the left are evaluated after. In other words, list operators tend to gobble up all arguments that follow, and then act like a simple TERM with regard to the preceding expression. Be careful with parentheses: # These evaluate exit before doing the print: print($foo, exit); # Obviously not what you want. print $foo, exit; # Nor is this. # These do the print before evaluating exit: (print $foo), exit; # This is what you want. print($foo), exit; # Or this. print ($foo), exit; # Or even this. Also note that print ($foo & 255) + 1, "\n"; probably doesn't do what you expect at first glance. The parentheses enclose the argument list for C<print> which is evaluated (printing the result of S<C<$foo & 255>>). Then one is added to the return value of C<print> (usually 1). The result is something like this: 1 + 1, "\n"; # Obviously not what you meant. To do what you meant properly, you must write: print(($foo & 255) + 1, "\n"); See L</Named Unary Operators> for more discussion of this. Also parsed as terms are the S<C<do {}>> and S<C<eval {}>> constructs, as well as subroutine and method calls, and the anonymous constructors C<[]> and C<{}>. See also L</Quote and Quote-like Operators> toward the end of this section, as well as L</"I/O Operators">. =head2 The Arrow Operator X<arrow> X<dereference> X<< -> >> "C<< -> >>" is an infix dereference operator, just as it is in C and C++. If the right side is either a C<[...]>, C<{...}>, or a C<(...)> subscript, then the left side must be either a hard or symbolic reference to an array, a hash, or a subroutine respectively. (Or technically speaking, a location capable of holding a hard reference, if it's an array or hash reference being used for assignment.) See L<perlreftut> and L<perlref>. Otherwise, the right side is a method name or a simple scalar variable containing either the method name or a subroutine reference, and the left side must be either an object (a blessed reference) or a class name (that is, a package name). See L<perlobj>. The dereferencing cases (as opposed to method-calling cases) are somewhat extended by the C<postderef> feature. For the details of that feature, consult L<perlref/Postfix Dereference Syntax>. =head2 Auto-increment and Auto-decrement X<increment> X<auto-increment> X<++> X<decrement> X<auto-decrement> X<--> C<"++"> and C<"--"> work as in C. That is, if placed before a variable, they increment or decrement the variable by one before returning the value, and if placed after, increment or decrement after returning the value. $i = 0; $j = 0; print $i++; # prints 0 print ++$j; # prints 1 Note that just as in C, Perl doesn't define B<when> the variable is incremented or decremented. You just know it will be done sometime before or after the value is returned. This also means that modifying a variable twice in the same statement will lead to undefined behavior. Avoid statements like: $i = $i ++; print ++ $i + $i ++; Perl will not guarantee what the result of the above statements is. The auto-increment operator has a little extra builtin magic to it. If you increment a variable that is numeric, or that has ever been used in a numeric context, you get a normal increment. If, however, the variable has been used in only string contexts since it was set, and has a value that is not the empty string and matches the pattern C</^[a-zA-Z]*[0-9]*\z/>, the increment is done as a string, preserving each character within its range, with carry: print ++($foo = "99"); # prints "100" print ++($foo = "a0"); # prints "a1" print ++($foo = "Az"); # prints "Ba" print ++($foo = "zz"); # prints "aaa" C<undef> is always treated as numeric, and in particular is changed to C<0> before incrementing (so that a post-increment of an undef value will return C<0> rather than C<undef>). The auto-decrement operator is not magical. =head2 Exponentiation X<**> X<exponentiation> X<power> Binary C<"**"> is the exponentiation operator. It binds even more tightly than unary minus, so C<-2**4> is C<-(2**4)>, not C<(-2)**4>. (This is implemented using C's C<pow(3)> function, which actually works on doubles internally.) Note that certain exponentiation expressions are ill-defined: these include C<0**0>, C<1**Inf>, and C<Inf**0>. Do not expect any particular results from these special cases, the results are platform-dependent. =head2 Symbolic Unary Operators X<unary operator> X<operator, unary> Unary C<"!"> performs logical negation, that is, "not". See also L<C<not>|/Logical Not> for a lower precedence version of this. X<!> Unary C<"-"> performs arithmetic negation if the operand is numeric, including any string that looks like a number. If the operand is an identifier, a string consisting of a minus sign concatenated with the identifier is returned. Otherwise, if the string starts with a plus or minus, a string starting with the opposite sign is returned. One effect of these rules is that C<-bareword> is equivalent to the string C<"-bareword">. If, however, the string begins with a non-alphabetic character (excluding C<"+"> or C<"-">), Perl will attempt to convert the string to a numeric, and the arithmetic negation is performed. If the string cannot be cleanly converted to a numeric, Perl will give the warning B<Argument "the string" isn't numeric in negation (-) at ...>. X<-> X<negation, arithmetic> Unary C<"~"> performs bitwise negation, that is, 1's complement. For example, S<C<0666 & ~027>> is 0640. (See also L</Integer Arithmetic> and L</Bitwise String Operators>.) Note that the width of the result is platform-dependent: C<~0> is 32 bits wide on a 32-bit platform, but 64 bits wide on a 64-bit platform, so if you are expecting a certain bit width, remember to use the C<"&"> operator to mask off the excess bits. X<~> X<negation, binary> Starting in Perl 5.28, it is a fatal error to try to complement a string containing a character with an ordinal value above 255. If the "bitwise" feature is enabled via S<C<use feature 'bitwise'>> or C<use v5.28>, then unary C<"~"> always treats its argument as a number, and an alternate form of the operator, C<"~.">, always treats its argument as a string. So C<~0> and C<~"0"> will both give 2**32-1 on 32-bit platforms, whereas C<~.0> and C<~."0"> will both yield C<"\xff">. Until Perl 5.28, this feature produced a warning in the C<"experimental::bitwise"> category. Unary C<"+"> has no effect whatsoever, even on strings. It is useful syntactically for separating a function name from a parenthesized expression that would otherwise be interpreted as the complete list of function arguments. (See examples above under L</Terms and List Operators (Leftward)>.) X<+> Unary C<"\"> creates references. If its operand is a single sigilled thing, it creates a reference to that object. If its operand is a parenthesised list, then it creates references to the things mentioned in the list. Otherwise it puts its operand in list context, and creates a list of references to the scalars in the list provided by the operand. See L<perlreftut> and L<perlref>. Do not confuse this behavior with the behavior of backslash within a string, although both forms do convey the notion of protecting the next thing from interpolation. X<\> X<reference> X<backslash> =head2 Binding Operators X<binding> X<operator, binding> X<=~> X<!~> Binary C<"=~"> binds a scalar expression to a pattern match. Certain operations search or modify the string C<$_> by default. This operator makes that kind of operation work on some other string. The right argument is a search pattern, substitution, or transliteration. The left argument is what is supposed to be searched, substituted, or transliterated instead of the default C<$_>. When used in scalar context, the return value generally indicates the success of the operation. The exceptions are substitution (C<s///>) and transliteration (C<y///>) with the C</r> (non-destructive) option, which cause the B<r>eturn value to be the result of the substitution. Behavior in list context depends on the particular operator. See L</"Regexp Quote-Like Operators"> for details and L<perlretut> for examples using these operators. If the right argument is an expression rather than a search pattern, substitution, or transliteration, it is interpreted as a search pattern at run time. Note that this means that its contents will be interpolated twice, so '\\' =~ q'\\'; is not ok, as the regex engine will end up trying to compile the pattern C<\>, which it will consider a syntax error. Binary C<"!~"> is just like C<"=~"> except the return value is negated in the logical sense. Binary C<"!~"> with a non-destructive substitution (C<s///r>) or transliteration (C<y///r>) is a syntax error. =head2 Multiplicative Operators X<operator, multiplicative> Binary C<"*"> multiplies two numbers. X<*> Binary C<"/"> divides two numbers. X</> X<slash> Binary C<"%"> is the modulo operator, which computes the division remainder of its first argument with respect to its second argument. Given integer operands C<$m> and C<$n>: If C<$n> is positive, then S<C<$m % $n>> is C<$m> minus the largest multiple of C<$n> less than or equal to C<$m>. If C<$n> is negative, then S<C<$m % $n>> is C<$m> minus the smallest multiple of C<$n> that is not less than C<$m> (that is, the result will be less than or equal to zero). If the operands C<$m> and C<$n> are floating point values and the absolute value of C<$n> (that is C<abs($n)>) is less than S<C<(UV_MAX + 1)>>, only the integer portion of C<$m> and C<$n> will be used in the operation (Note: here C<UV_MAX> means the maximum of the unsigned integer type). If the absolute value of the right operand (C<abs($n)>) is greater than or equal to S<C<(UV_MAX + 1)>>, C<"%"> computes the floating-point remainder C<$r> in the equation S<C<($r = $m - $i*$n)>> where C<$i> is a certain integer that makes C<$r> have the same sign as the right operand C<$n> (B<not> as the left operand C<$m> like C function C<fmod()>) and the absolute value less than that of C<$n>. Note that when S<C<use integer>> is in scope, C<"%"> gives you direct access to the modulo operator as implemented by your C compiler. This operator is not as well defined for negative operands, but it will execute faster. X<%> X<remainder> X<modulo> X<mod> Binary C<x> is the repetition operator. In scalar context, or if the left operand is neither enclosed in parentheses nor a C<qw//> list, it performs a string repetition. In that case it supplies scalar context to the left operand, and returns a string consisting of the left operand string repeated the number of times specified by the right operand. If the C<x> is in list context, and the left operand is either enclosed in parentheses or a C<qw//> list, it performs a list repetition. In that case it supplies list context to the left operand, and returns a list consisting of the left operand list repeated the number of times specified by the right operand. If the right operand is zero or negative (raising a warning on negative), it returns an empty string or an empty list, depending on the context. X<x> print '-' x 80; # print row of dashes print "\t" x ($tab/8), ' ' x ($tab%8); # tab over @ones = (1) x 80; # a list of 80 1's @ones = (5) x @ones; # set all elements to 5 =head2 Additive Operators X<operator, additive> Binary C<"+"> returns the sum of two numbers. X<+> Binary C<"-"> returns the difference of two numbers. X<-> Binary C<"."> concatenates two strings. X<string, concatenation> X<concatenation> X<cat> X<concat> X<concatenate> X<.> =head2 Shift Operators X<shift operator> X<operator, shift> X<<< << >>> X<<< >> >>> X<right shift> X<left shift> X<bitwise shift> X<shl> X<shr> X<shift, right> X<shift, left> Binary C<<< "<<" >>> returns the value of its left argument shifted left by the number of bits specified by the right argument. Arguments should be integers. (See also L</Integer Arithmetic>.) Binary C<<< ">>" >>> returns the value of its left argument shifted right by the number of bits specified by the right argument. Arguments should be integers. (See also L</Integer Arithmetic>.) If S<C<use integer>> (see L</Integer Arithmetic>) is in force then signed C integers are used (I<arithmetic shift>), otherwise unsigned C integers are used (I<logical shift>), even for negative shiftees. In arithmetic right shift the sign bit is replicated on the left, in logical shift zero bits come in from the left. Either way, the implementation isn't going to generate results larger than the size of the integer type Perl was built with (32 bits or 64 bits). Shifting by negative number of bits means the reverse shift: left shift becomes right shift, right shift becomes left shift. This is unlike in C, where negative shift is undefined. Shifting by more bits than the size of the integers means most of the time zero (all bits fall off), except that under S<C<use integer>> right overshifting a negative shiftee results in -1. This is unlike in C, where shifting by too many bits is undefined. A common C behavior is "shift by modulo wordbits", so that for example 1 >> 64 == 1 >> (64 % 64) == 1 >> 0 == 1 # Common C behavior. but that is completely accidental. If you get tired of being subject to your platform's native integers, the S<C<use bigint>> pragma neatly sidesteps the issue altogether: print 20 << 20; # 20971520 print 20 << 40; # 5120 on 32-bit machines, # 21990232555520 on 64-bit machines use bigint; print 20 << 100; # 25353012004564588029934064107520 =head2 Named Unary Operators X<operator, named unary> The various named unary operators are treated as functions with one argument, with optional parentheses. If any list operator (C<print()>, etc.) or any unary operator (C<chdir()>, etc.) is followed by a left parenthesis as the next token, the operator and arguments within parentheses are taken to be of highest precedence, just like a normal function call. For example, because named unary operators are higher precedence than C<||>: chdir $foo || die; # (chdir $foo) || die chdir($foo) || die; # (chdir $foo) || die chdir ($foo) || die; # (chdir $foo) || die chdir +($foo) || die; # (chdir $foo) || die but, because C<"*"> is higher precedence than named operators: chdir $foo * 20; # chdir ($foo * 20) chdir($foo) * 20; # (chdir $foo) * 20 chdir ($foo) * 20; # (chdir $foo) * 20 chdir +($foo) * 20; # chdir ($foo * 20) rand 10 * 20; # rand (10 * 20) rand(10) * 20; # (rand 10) * 20 rand (10) * 20; # (rand 10) * 20 rand +(10) * 20; # rand (10 * 20) Regarding precedence, the filetest operators, like C<-f>, C<-M>, etc. are treated like named unary operators, but they don't follow this functional parenthesis rule. That means, for example, that C<-f($file).".bak"> is equivalent to S<C<-f "$file.bak">>. X<-X> X<filetest> X<operator, filetest> See also L</"Terms and List Operators (Leftward)">. =head2 Relational Operators X<relational operator> X<operator, relational> Perl operators that return true or false generally return values that can be safely used as numbers. For example, the relational operators in this section and the equality operators in the next one return C<1> for true and a special version of the defined empty string, C<"">, which counts as a zero but is exempt from warnings about improper numeric conversions, just as S<C<"0 but true">> is. Binary C<< "<" >> returns true if the left argument is numerically less than the right argument. X<< < >> Binary C<< ">" >> returns true if the left argument is numerically greater than the right argument. X<< > >> Binary C<< "<=" >> returns true if the left argument is numerically less than or equal to the right argument. X<< <= >> Binary C<< ">=" >> returns true if the left argument is numerically greater than or equal to the right argument. X<< >= >> Binary C<"lt"> returns true if the left argument is stringwise less than the right argument. X<< lt >> Binary C<"gt"> returns true if the left argument is stringwise greater than the right argument. X<< gt >> Binary C<"le"> returns true if the left argument is stringwise less than or equal to the right argument. X<< le >> Binary C<"ge"> returns true if the left argument is stringwise greater than or equal to the right argument. X<< ge >> A sequence of relational operators, such as S<C<"$x E<lt> $y E<lt>= $z">>, performs chained comparisons, in the manner described above in the section L</"Operator Precedence and Associativity">. Beware that they do not chain with equality operators, which have lower precedence. =head2 Equality Operators X<equality> X<equal> X<equals> X<operator, equality> Binary C<< "==" >> returns true if the left argument is numerically equal to the right argument. X<==> Binary C<< "!=" >> returns true if the left argument is numerically not equal to the right argument. X<!=> Binary C<"eq"> returns true if the left argument is stringwise equal to the right argument. X<eq> Binary C<"ne"> returns true if the left argument is stringwise not equal to the right argument. X<ne> A sequence of the above equality operators, such as S<C<"$x == $y == $z">>, performs chained comparisons, in the manner described above in the section L</"Operator Precedence and Associativity">. Beware that they do not chain with relational operators, which have higher precedence. Binary C<< "<=>" >> returns -1, 0, or 1 depending on whether the left argument is numerically less than, equal to, or greater than the right argument. If your platform supports C<NaN>'s (not-a-numbers) as numeric values, using them with C<< "<=>" >> returns undef. C<NaN> is not C<< "<" >>, C<< "==" >>, C<< ">" >>, C<< "<=" >> or C<< ">=" >> anything (even C<NaN>), so those 5 return false. S<C<< NaN != NaN >>> returns true, as does S<C<NaN !=> I<anything else>>. If your platform doesn't support C<NaN>'s then C<NaN> is just a string with numeric value 0. X<< <=> >> X<spaceship> $ perl -le '$x = "NaN"; print "No NaN support here" if $x == $x' $ perl -le '$x = "NaN"; print "NaN support here" if $x != $x' (Note that the L<bigint>, L<bigrat>, and L<bignum> pragmas all support C<"NaN">.) Binary C<"cmp"> returns -1, 0, or 1 depending on whether the left argument is stringwise less than, equal to, or greater than the right argument. X<cmp> Binary C<"~~"> does a smartmatch between its arguments. Smart matching is described in the next section. X<~~> The two-sided ordering operators C<"E<lt>=E<gt>"> and C<"cmp">, and the smartmatch operator C<"~~">, are non-associative with respect to each other and with respect to the equality operators of the same precedence. C<"lt">, C<"le">, C<"ge">, C<"gt"> and C<"cmp"> use the collation (sort) order specified by the current C<LC_COLLATE> locale if a S<C<use locale>> form that includes collation is in effect. See L<perllocale>. Do not mix these with Unicode, only use them with legacy 8-bit locale encodings. The standard C<L<Unicode::Collate>> and C<L<Unicode::Collate::Locale>> modules offer much more powerful solutions to collation issues. For case-insensitive comparisons, look at the L<perlfunc/fc> case-folding function, available in Perl v5.16 or later: if ( fc($x) eq fc($y) ) { ... } =head2 Class Instance Operator X<isa operator> Binary C<isa> evaluates to true when the left argument is an object instance of the class (or a subclass derived from that class) given by the right argument. If the left argument is not defined, not a blessed object instance, nor does not derive from the class given by the right argument, the operator evaluates as false. The right argument may give the class either as a bareword or a scalar expression that yields a string class name: if( $obj isa Some::Class ) { ... } if( $obj isa "Different::Class" ) { ... } if( $obj isa $name_of_class ) { ... } This is an experimental feature and is available from Perl 5.31.6 when enabled by C<use feature 'isa'>. It emits a warning in the C<experimental::isa> category. =head2 Smartmatch Operator First available in Perl 5.10.1 (the 5.10.0 version behaved differently), binary C<~~> does a "smartmatch" between its arguments. This is mostly used implicitly in the C<when> construct described in L<perlsyn>, although not all C<when> clauses call the smartmatch operator. Unique among all of Perl's operators, the smartmatch operator can recurse. The smartmatch operator is L<experimental|perlpolicy/experimental> and its behavior is subject to change. It is also unique in that all other Perl operators impose a context (usually string or numeric context) on their operands, autoconverting those operands to those imposed contexts. In contrast, smartmatch I<infers> contexts from the actual types of its operands and uses that type information to select a suitable comparison mechanism. The C<~~> operator compares its operands "polymorphically", determining how to compare them according to their actual types (numeric, string, array, hash, etc.). Like the equality operators with which it shares the same precedence, C<~~> returns 1 for true and C<""> for false. It is often best read aloud as "in", "inside of", or "is contained in", because the left operand is often looked for I<inside> the right operand. That makes the order of the operands to the smartmatch operand often opposite that of the regular match operator. In other words, the "smaller" thing is usually placed in the left operand and the larger one in the right. The behavior of a smartmatch depends on what type of things its arguments are, as determined by the following table. The first row of the table whose types apply determines the smartmatch behavior. Because what actually happens is mostly determined by the type of the second operand, the table is sorted on the right operand instead of on the left. Left Right Description and pseudocode =============================================================== Any undef check whether Any is undefined like: !defined Any Any Object invoke ~~ overloading on Object, or die Right operand is an ARRAY: Left Right Description and pseudocode =============================================================== ARRAY1 ARRAY2 recurse on paired elements of ARRAY1 and ARRAY2[2] like: (ARRAY1[0] ~~ ARRAY2[0]) && (ARRAY1[1] ~~ ARRAY2[1]) && ... HASH ARRAY any ARRAY elements exist as HASH keys like: grep { exists HASH->{$_} } ARRAY Regexp ARRAY any ARRAY elements pattern match Regexp like: grep { /Regexp/ } ARRAY undef ARRAY undef in ARRAY like: grep { !defined } ARRAY Any ARRAY smartmatch each ARRAY element[3] like: grep { Any ~~ $_ } ARRAY Right operand is a HASH: Left Right Description and pseudocode =============================================================== HASH1 HASH2 all same keys in both HASHes like: keys HASH1 == grep { exists HASH2->{$_} } keys HASH1 ARRAY HASH any ARRAY elements exist as HASH keys like: grep { exists HASH->{$_} } ARRAY Regexp HASH any HASH keys pattern match Regexp like: grep { /Regexp/ } keys HASH undef HASH always false (undef can't be a key) like: 0 == 1 Any HASH HASH key existence like: exists HASH->{Any} Right operand is CODE: Left Right Description and pseudocode =============================================================== ARRAY CODE sub returns true on all ARRAY elements[1] like: !grep { !CODE->($_) } ARRAY HASH CODE sub returns true on all HASH keys[1] like: !grep { !CODE->($_) } keys HASH Any CODE sub passed Any returns true like: CODE->(Any) Right operand is a Regexp: Left Right Description and pseudocode =============================================================== ARRAY Regexp any ARRAY elements match Regexp like: grep { /Regexp/ } ARRAY HASH Regexp any HASH keys match Regexp like: grep { /Regexp/ } keys HASH Any Regexp pattern match like: Any =~ /Regexp/ Other: Left Right Description and pseudocode =============================================================== Object Any invoke ~~ overloading on Object, or fall back to... Any Num numeric equality like: Any == Num Num nummy[4] numeric equality like: Num == nummy undef Any check whether undefined like: !defined(Any) Any Any string equality like: Any eq Any Notes: =over =item 1. Empty hashes or arrays match. =item 2. That is, each element smartmatches the element of the same index in the other array.[3] =item 3. If a circular reference is found, fall back to referential equality. =item 4. Either an actual number, or a string that looks like one. =back The smartmatch implicitly dereferences any non-blessed hash or array reference, so the C<I<HASH>> and C<I<ARRAY>> entries apply in those cases. For blessed references, the C<I<Object>> entries apply. Smartmatches involving hashes only consider hash keys, never hash values. The "like" code entry is not always an exact rendition. For example, the smartmatch operator short-circuits whenever possible, but C<grep> does not. Also, C<grep> in scalar context returns the number of matches, but C<~~> returns only true or false. Unlike most operators, the smartmatch operator knows to treat C<undef> specially: use v5.10.1; @array = (1, 2, 3, undef, 4, 5); say "some elements undefined" if undef ~~ @array; Each operand is considered in a modified scalar context, the modification being that array and hash variables are passed by reference to the operator, which implicitly dereferences them. Both elements of each pair are the same: use v5.10.1; my %hash = (red => 1, blue => 2, green => 3, orange => 4, yellow => 5, purple => 6, black => 7, grey => 8, white => 9); my @array = qw(red blue green); say "some array elements in hash keys" if @array ~~ %hash; say "some array elements in hash keys" if \@array ~~ \%hash; say "red in array" if "red" ~~ @array; say "red in array" if "red" ~~ \@array; say "some keys end in e" if /e$/ ~~ %hash; say "some keys end in e" if /e$/ ~~ \%hash; Two arrays smartmatch if each element in the first array smartmatches (that is, is "in") the corresponding element in the second array, recursively. use v5.10.1; my @little = qw(red blue green); my @bigger = ("red", "blue", [ "orange", "green" ] ); if (@little ~~ @bigger) { # true! say "little is contained in bigger"; } Because the smartmatch operator recurses on nested arrays, this will still report that "red" is in the array. use v5.10.1; my @array = qw(red blue green); my $nested_array = [[[[[[[ @array ]]]]]]]; say "red in array" if "red" ~~ $nested_array; If two arrays smartmatch each other, then they are deep copies of each others' values, as this example reports: use v5.12.0; my @a = (0, 1, 2, [3, [4, 5], 6], 7); my @b = (0, 1, 2, [3, [4, 5], 6], 7); if (@a ~~ @b && @b ~~ @a) { say "a and b are deep copies of each other"; } elsif (@a ~~ @b) { say "a smartmatches in b"; } elsif (@b ~~ @a) { say "b smartmatches in a"; } else { say "a and b don't smartmatch each other at all"; } If you were to set S<C<$b[3] = 4>>, then instead of reporting that "a and b are deep copies of each other", it now reports that C<"b smartmatches in a">. That's because the corresponding position in C<@a> contains an array that (eventually) has a 4 in it. Smartmatching one hash against another reports whether both contain the same keys, no more and no less. This could be used to see whether two records have the same field names, without caring what values those fields might have. For example: use v5.10.1; sub make_dogtag { state $REQUIRED_FIELDS = { name=>1, rank=>1, serial_num=>1 }; my ($class, $init_fields) = @_; die "Must supply (only) name, rank, and serial number" unless $init_fields ~~ $REQUIRED_FIELDS; ... } However, this only does what you mean if C<$init_fields> is indeed a hash reference. The condition C<$init_fields ~~ $REQUIRED_FIELDS> also allows the strings C<"name">, C<"rank">, C<"serial_num"> as well as any array reference that contains C<"name"> or C<"rank"> or C<"serial_num"> anywhere to pass through. The smartmatch operator is most often used as the implicit operator of a C<when> clause. See the section on "Switch Statements" in L<perlsyn>. =head3 Smartmatching of Objects To avoid relying on an object's underlying representation, if the smartmatch's right operand is an object that doesn't overload C<~~>, it raises the exception "C<Smartmatching a non-overloaded object breaks encapsulation>". That's because one has no business digging around to see whether something is "in" an object. These are all illegal on objects without a C<~~> overload: %hash ~~ $object 42 ~~ $object "fred" ~~ $object However, you can change the way an object is smartmatched by overloading the C<~~> operator. This is allowed to extend the usual smartmatch semantics. For objects that do have an C<~~> overload, see L<overload>. Using an object as the left operand is allowed, although not very useful. Smartmatching rules take precedence over overloading, so even if the object in the left operand has smartmatch overloading, this will be ignored. A left operand that is a non-overloaded object falls back on a string or numeric comparison of whatever the C<ref> operator returns. That means that $object ~~ X does I<not> invoke the overload method with C<I<X>> as an argument. Instead the above table is consulted as normal, and based on the type of C<I<X>>, overloading may or may not be invoked. For simple strings or numbers, "in" becomes equivalent to this: $object ~~ $number ref($object) == $number $object ~~ $string ref($object) eq $string For example, this reports that the handle smells IOish (but please don't really do this!): use IO::Handle; my $fh = IO::Handle->new(); if ($fh ~~ /\bIO\b/) { say "handle smells IOish"; } That's because it treats C<$fh> as a string like C<"IO::Handle=GLOB(0x8039e0)">, then pattern matches against that. =head2 Bitwise And X<operator, bitwise, and> X<bitwise and> X<&> Binary C<"&"> returns its operands ANDed together bit by bit. Although no warning is currently raised, the result is not well defined when this operation is performed on operands that aren't either numbers (see L</Integer Arithmetic>) nor bitstrings (see L</Bitwise String Operators>). Note that C<"&"> has lower priority than relational operators, so for example the parentheses are essential in a test like print "Even\n" if ($x & 1) == 0; If the "bitwise" feature is enabled via S<C<use feature 'bitwise'>> or C<use v5.28>, then this operator always treats its operands as numbers. Before Perl 5.28 this feature produced a warning in the C<"experimental::bitwise"> category. =head2 Bitwise Or and Exclusive Or X<operator, bitwise, or> X<bitwise or> X<|> X<operator, bitwise, xor> X<bitwise xor> X<^> Binary C<"|"> returns its operands ORed together bit by bit. Binary C<"^"> returns its operands XORed together bit by bit. Although no warning is currently raised, the results are not well defined when these operations are performed on operands that aren't either numbers (see L</Integer Arithmetic>) nor bitstrings (see L</Bitwise String Operators>). Note that C<"|"> and C<"^"> have lower priority than relational operators, so for example the parentheses are essential in a test like print "false\n" if (8 | 2) != 10; If the "bitwise" feature is enabled via S<C<use feature 'bitwise'>> or C<use v5.28>, then this operator always treats its operands as numbers. Before Perl 5.28. this feature produced a warning in the C<"experimental::bitwise"> category. =head2 C-style Logical And X<&&> X<logical and> X<operator, logical, and> Binary C<"&&"> performs a short-circuit logical AND operation. That is, if the left operand is false, the right operand is not even evaluated. Scalar or list context propagates down to the right operand if it is evaluated. =head2 C-style Logical Or X<||> X<operator, logical, or> Binary C<"||"> performs a short-circuit logical OR operation. That is, if the left operand is true, the right operand is not even evaluated. Scalar or list context propagates down to the right operand if it is evaluated. =head2 Logical Defined-Or X<//> X<operator, logical, defined-or> Although it has no direct equivalent in C, Perl's C<//> operator is related to its C-style "or". In fact, it's exactly the same as C<||>, except that it tests the left hand side's definedness instead of its truth. Thus, S<C<< EXPR1 // EXPR2 >>> returns the value of C<< EXPR1 >> if it's defined, otherwise, the value of C<< EXPR2 >> is returned. (C<< EXPR1 >> is evaluated in scalar context, C<< EXPR2 >> in the context of C<< // >> itself). Usually, this is the same result as S<C<< defined(EXPR1) ? EXPR1 : EXPR2 >>> (except that the ternary-operator form can be used as a lvalue, while S<C<< EXPR1 // EXPR2 >>> cannot). This is very useful for providing default values for variables. If you actually want to test if at least one of C<$x> and C<$y> is defined, use S<C<defined($x // $y)>>. The C<||>, C<//> and C<&&> operators return the last value evaluated (unlike C's C<||> and C<&&>, which return 0 or 1). Thus, a reasonably portable way to find out the home directory might be: $home = $ENV{HOME} // $ENV{LOGDIR} // (getpwuid($<))[7] // die "You're homeless!\n"; In particular, this means that you shouldn't use this for selecting between two aggregates for assignment: @a = @b || @c; # This doesn't do the right thing @a = scalar(@b) || @c; # because it really means this. @a = @b ? @b : @c; # This works fine, though. As alternatives to C<&&> and C<||> when used for control flow, Perl provides the C<and> and C<or> operators (see below). The short-circuit behavior is identical. The precedence of C<"and"> and C<"or"> is much lower, however, so that you can safely use them after a list operator without the need for parentheses: unlink "alpha", "beta", "gamma" or gripe(), next LINE; With the C-style operators that would have been written like this: unlink("alpha", "beta", "gamma") || (gripe(), next LINE); It would be even more readable to write that this way: unless(unlink("alpha", "beta", "gamma")) { gripe(); next LINE; } Using C<"or"> for assignment is unlikely to do what you want; see below. =head2 Range Operators X<operator, range> X<range> X<..> X<...> Binary C<".."> is the range operator, which is really two different operators depending on the context. In list context, it returns a list of values counting (up by ones) from the left value to the right value. If the left value is greater than the right value then it returns the empty list. The range operator is useful for writing S<C<foreach (1..10)>> loops and for doing slice operations on arrays. In the current implementation, no temporary array is created when the range operator is used as the expression in C<foreach> loops, but older versions of Perl might burn a lot of memory when you write something like this: for (1 .. 1_000_000) { # code } The range operator also works on strings, using the magical auto-increment, see below. In scalar context, C<".."> returns a boolean value. The operator is bistable, like a flip-flop, and emulates the line-range (comma) operator of B<sed>, B<awk>, and various editors. Each C<".."> operator maintains its own boolean state, even across calls to a subroutine that contains it. It is false as long as its left operand is false. Once the left operand is true, the range operator stays true until the right operand is true, I<AFTER> which the range operator becomes false again. It doesn't become false till the next time the range operator is evaluated. It can test the right operand and become false on the same evaluation it became true (as in B<awk>), but it still returns true once. If you don't want it to test the right operand until the next evaluation, as in B<sed>, just use three dots (C<"...">) instead of two. In all other regards, C<"..."> behaves just like C<".."> does. The right operand is not evaluated while the operator is in the "false" state, and the left operand is not evaluated while the operator is in the "true" state. The precedence is a little lower than || and &&. The value returned is either the empty string for false, or a sequence number (beginning with 1) for true. The sequence number is reset for each range encountered. The final sequence number in a range has the string C<"E0"> appended to it, which doesn't affect its numeric value, but gives you something to search for if you want to exclude the endpoint. You can exclude the beginning point by waiting for the sequence number to be greater than 1. If either operand of scalar C<".."> is a constant expression, that operand is considered true if it is equal (C<==>) to the current input line number (the C<$.> variable). To be pedantic, the comparison is actually S<C<int(EXPR) == int(EXPR)>>, but that is only an issue if you use a floating point expression; when implicitly using C<$.> as described in the previous paragraph, the comparison is S<C<int(EXPR) == int($.)>> which is only an issue when C<$.> is set to a floating point value and you are not reading from a file. Furthermore, S<C<"span" .. "spat">> or S<C<2.18 .. 3.14>> will not do what you want in scalar context because each of the operands are evaluated using their integer representation. Examples: As a scalar operator: if (101 .. 200) { print; } # print 2nd hundred lines, short for # if ($. == 101 .. $. == 200) { print; } next LINE if (1 .. /^$/); # skip header lines, short for # next LINE if ($. == 1 .. /^$/); # (typically in a loop labeled LINE) s/^/> / if (/^$/ .. eof()); # quote body # parse mail messages while (<>) { $in_header = 1 .. /^$/; $in_body = /^$/ .. eof; if ($in_header) { # do something } else { # in body # do something else } } continue { close ARGV if eof; # reset $. each file } Here's a simple example to illustrate the difference between the two range operators: @lines = (" - Foo", "01 - Bar", "1 - Baz", " - Quux"); foreach (@lines) { if (/0/ .. /1/) { print "$_\n"; } } This program will print only the line containing "Bar". If the range operator is changed to C<...>, it will also print the "Baz" line. And now some examples as a list operator: for (101 .. 200) { print } # print $_ 100 times @foo = @foo[0 .. $#foo]; # an expensive no-op @foo = @foo[$#foo-4 .. $#foo]; # slice last 5 items Because each operand is evaluated in integer form, S<C<2.18 .. 3.14>> will return two elements in list context. @list = (2.18 .. 3.14); # same as @list = (2 .. 3); The range operator in list context can make use of the magical auto-increment algorithm if both operands are strings, subject to the following rules: =over =item * With one exception (below), if both strings look like numbers to Perl, the magic increment will not be applied, and the strings will be treated as numbers (more specifically, integers) instead. For example, C<"-2".."2"> is the same as C<-2..2>, and C<"2.18".."3.14"> produces C<2, 3>. =item * The exception to the above rule is when the left-hand string begins with C<0> and is longer than one character, in this case the magic increment I<will> be applied, even though strings like C<"01"> would normally look like a number to Perl. For example, C<"01".."04"> produces C<"01", "02", "03", "04">, and C<"00".."-1"> produces C<"00"> through C<"99"> - this may seem surprising, but see the following rules for why it works this way. To get dates with leading zeros, you can say: @z2 = ("01" .. "31"); print $z2[$mday]; If you want to force strings to be interpreted as numbers, you could say @numbers = ( 0+$first .. 0+$last ); B<Note:> In Perl versions 5.30 and below, I<any> string on the left-hand side beginning with C<"0">, including the string C<"0"> itself, would cause the magic string increment behavior. This means that on these Perl versions, C<"0".."-1"> would produce C<"0"> through C<"99">, which was inconsistent with C<0..-1>, which produces the empty list. This also means that C<"0".."9"> now produces a list of integers instead of a list of strings. =item * If the initial value specified isn't part of a magical increment sequence (that is, a non-empty string matching C</^[a-zA-Z]*[0-9]*\z/>), only the initial value will be returned. For example, C<"ax".."az"> produces C<"ax", "ay", "az">, but C<"*x".."az"> produces only C<"*x">. =item * For other initial values that are strings that do follow the rules of the magical increment, the corresponding sequence will be returned. For example, you can say @alphabet = ("A" .. "Z"); to get all normal letters of the English alphabet, or $hexdigit = (0 .. 9, "a" .. "f")[$num & 15]; to get a hexadecimal digit. =item * If the final value specified is not in the sequence that the magical increment would produce, the sequence goes until the next value would be longer than the final value specified. If the length of the final string is shorter than the first, the empty list is returned. For example, C<"a".."--"> is the same as C<"a".."zz">, C<"0".."xx"> produces C<"0"> through C<"99">, and C<"aaa".."--"> returns the empty list. =back As of Perl 5.26, the list-context range operator on strings works as expected in the scope of L<< S<C<"use feature 'unicode_strings">>|feature/The 'unicode_strings' feature >>. In previous versions, and outside the scope of that feature, it exhibits L<perlunicode/The "Unicode Bug">: its behavior depends on the internal encoding of the range endpoint. Because the magical increment only works on non-empty strings matching C</^[a-zA-Z]*[0-9]*\z/>, the following will only return an alpha: use charnames "greek"; my @greek_small = ("\N{alpha}" .. "\N{omega}"); To get the 25 traditional lowercase Greek letters, including both sigmas, you could use this instead: use charnames "greek"; my @greek_small = map { chr } ( ord("\N{alpha}") .. ord("\N{omega}") ); However, because there are I<many> other lowercase Greek characters than just those, to match lowercase Greek characters in a regular expression, you could use the pattern C</(?:(?=\p{Greek})\p{Lower})+/> (or the L<experimental feature|perlrecharclass/Extended Bracketed Character Classes> C<S</(?[ \p{Greek} & \p{Lower} ])+/>>). =head2 Conditional Operator X<operator, conditional> X<operator, ternary> X<ternary> X<?:> Ternary C<"?:"> is the conditional operator, just as in C. It works much like an if-then-else. If the argument before the C<?> is true, the argument before the C<:> is returned, otherwise the argument after the C<:> is returned. For example: printf "I have %d dog%s.\n", $n, ($n == 1) ? "" : "s"; Scalar or list context propagates downward into the 2nd or 3rd argument, whichever is selected. $x = $ok ? $y : $z; # get a scalar @x = $ok ? @y : @z; # get an array $x = $ok ? @y : @z; # oops, that's just a count! The operator may be assigned to if both the 2nd and 3rd arguments are legal lvalues (meaning that you can assign to them): ($x_or_y ? $x : $y) = $z; Because this operator produces an assignable result, using assignments without parentheses will get you in trouble. For example, this: $x % 2 ? $x += 10 : $x += 2 Really means this: (($x % 2) ? ($x += 10) : $x) += 2 Rather than this: ($x % 2) ? ($x += 10) : ($x += 2) That should probably be written more simply as: $x += ($x % 2) ? 10 : 2; =head2 Assignment Operators X<assignment> X<operator, assignment> X<=> X<**=> X<+=> X<*=> X<&=> X<<< <<= >>> X<&&=> X<-=> X</=> X<|=> X<<< >>= >>> X<||=> X<//=> X<.=> X<%=> X<^=> X<x=> X<&.=> X<|.=> X<^.=> C<"="> is the ordinary assignment operator. Assignment operators work as in C. That is, $x += 2; is equivalent to $x = $x + 2; although without duplicating any side effects that dereferencing the lvalue might trigger, such as from C<tie()>. Other assignment operators work similarly. The following are recognized: **= += *= &= &.= <<= &&= -= /= |= |.= >>= ||= .= %= ^= ^.= //= x= Although these are grouped by family, they all have the precedence of assignment. These combined assignment operators can only operate on scalars, whereas the ordinary assignment operator can assign to arrays, hashes, lists and even references. (See L<"Context"|perldata/Context> and L<perldata/List value constructors>, and L<perlref/Assigning to References>.) Unlike in C, the scalar assignment operator produces a valid lvalue. Modifying an assignment is equivalent to doing the assignment and then modifying the variable that was assigned to. This is useful for modifying a copy of something, like this: ($tmp = $global) =~ tr/13579/24680/; Although as of 5.14, that can be also be accomplished this way: use v5.14; $tmp = ($global =~ tr/13579/24680/r); Likewise, ($x += 2) *= 3; is equivalent to $x += 2; $x *= 3; Similarly, a list assignment in list context produces the list of lvalues assigned to, and a list assignment in scalar context returns the number of elements produced by the expression on the right hand side of the assignment. The three dotted bitwise assignment operators (C<&.=> C<|.=> C<^.=>) are new in Perl 5.22. See L</Bitwise String Operators>. =head2 Comma Operator X<comma> X<operator, comma> X<,> Binary C<","> is the comma operator. In scalar context it evaluates its left argument, throws that value away, then evaluates its right argument and returns that value. This is just like C's comma operator. In list context, it's just the list argument separator, and inserts both its arguments into the list. These arguments are also evaluated from left to right. The C<< => >> operator (sometimes pronounced "fat comma") is a synonym for the comma except that it causes a word on its left to be interpreted as a string if it begins with a letter or underscore and is composed only of letters, digits and underscores. This includes operands that might otherwise be interpreted as operators, constants, single number v-strings or function calls. If in doubt about this behavior, the left operand can be quoted explicitly. Otherwise, the C<< => >> operator behaves exactly as the comma operator or list argument separator, according to context. For example: use constant FOO => "something"; my %h = ( FOO => 23 ); is equivalent to: my %h = ("FOO", 23); It is I<NOT>: my %h = ("something", 23); The C<< => >> operator is helpful in documenting the correspondence between keys and values in hashes, and other paired elements in lists. %hash = ( $key => $value ); login( $username => $password ); The special quoting behavior ignores precedence, and hence may apply to I<part> of the left operand: print time.shift => "bbb"; That example prints something like C<"1314363215shiftbbb">, because the C<< => >> implicitly quotes the C<shift> immediately on its left, ignoring the fact that C<time.shift> is the entire left operand. =head2 List Operators (Rightward) X<operator, list, rightward> X<list operator> On the right side of a list operator, the comma has very low precedence, such that it controls all comma-separated expressions found there. The only operators with lower precedence are the logical operators C<"and">, C<"or">, and C<"not">, which may be used to evaluate calls to list operators without the need for parentheses: open HANDLE, "< :encoding(UTF-8)", "filename" or die "Can't open: $!\n"; However, some people find that code harder to read than writing it with parentheses: open(HANDLE, "< :encoding(UTF-8)", "filename") or die "Can't open: $!\n"; in which case you might as well just use the more customary C<"||"> operator: open(HANDLE, "< :encoding(UTF-8)", "filename") || die "Can't open: $!\n"; See also discussion of list operators in L</Terms and List Operators (Leftward)>. =head2 Logical Not X<operator, logical, not> X<not> Unary C<"not"> returns the logical negation of the expression to its right. It's the equivalent of C<"!"> except for the very low precedence. =head2 Logical And X<operator, logical, and> X<and> Binary C<"and"> returns the logical conjunction of the two surrounding expressions. It's equivalent to C<&&> except for the very low precedence. This means that it short-circuits: the right expression is evaluated only if the left expression is true. =head2 Logical or and Exclusive Or X<operator, logical, or> X<operator, logical, xor> X<operator, logical, exclusive or> X<or> X<xor> Binary C<"or"> returns the logical disjunction of the two surrounding expressions. It's equivalent to C<||> except for the very low precedence. This makes it useful for control flow: print FH $data or die "Can't write to FH: $!"; This means that it short-circuits: the right expression is evaluated only if the left expression is false. Due to its precedence, you must be careful to avoid using it as replacement for the C<||> operator. It usually works out better for flow control than in assignments: $x = $y or $z; # bug: this is wrong ($x = $y) or $z; # really means this $x = $y || $z; # better written this way However, when it's a list-context assignment and you're trying to use C<||> for control flow, you probably need C<"or"> so that the assignment takes higher precedence. @info = stat($file) || die; # oops, scalar sense of stat! @info = stat($file) or die; # better, now @info gets its due Then again, you could always use parentheses. Binary C<"xor"> returns the exclusive-OR of the two surrounding expressions. It cannot short-circuit (of course). There is no low precedence operator for defined-OR. =head2 C Operators Missing From Perl X<operator, missing from perl> X<&> X<*> X<typecasting> X<(TYPE)> Here is what C has that Perl doesn't: =over 8 =item unary & Address-of operator. (But see the C<"\"> operator for taking a reference.) =item unary * Dereference-address operator. (Perl's prefix dereferencing operators are typed: C<$>, C<@>, C<%>, and C<&>.) =item (TYPE) Type-casting operator. =back =head2 Quote and Quote-like Operators X<operator, quote> X<operator, quote-like> X<q> X<qq> X<qx> X<qw> X<m> X<qr> X<s> X<tr> X<'> X<''> X<"> X<""> X<//> X<`> X<``> X<<< << >>> X<escape sequence> X<escape> While we usually think of quotes as literal values, in Perl they function as operators, providing various kinds of interpolating and pattern matching capabilities. Perl provides customary quote characters for these behaviors, but also provides a way for you to choose your quote character for any of them. In the following table, a C<{}> represents any pair of delimiters you choose. Customary Generic Meaning Interpolates '' q{} Literal no "" qq{} Literal yes `` qx{} Command yes* qw{} Word list no // m{} Pattern match yes* qr{} Pattern yes* s{}{} Substitution yes* tr{}{} Transliteration no (but see below) y{}{} Transliteration no (but see below) <<EOF here-doc yes* * unless the delimiter is ''. Non-bracketing delimiters use the same character fore and aft, but the four sorts of ASCII brackets (round, angle, square, curly) all nest, which means that q{foo{bar}baz} is the same as 'foo{bar}baz' Note, however, that this does not always work for quoting Perl code: $s = q{ if($x eq "}") ... }; # WRONG is a syntax error. The C<L<Text::Balanced>> module (standard as of v5.8, and from CPAN before then) is able to do this properly. There can (and in some cases, must) be whitespace between the operator and the quoting characters, except when C<#> is being used as the quoting character. C<q#foo#> is parsed as the string C<foo>, while S<C<q #foo#>> is the operator C<q> followed by a comment. Its argument will be taken from the next line. This allows you to write: s {foo} # Replace foo {bar} # with bar. The cases where whitespace must be used are when the quoting character is a word character (meaning it matches C</\w/>): q XfooX # Works: means the string 'foo' qXfooX # WRONG! The following escape sequences are available in constructs that interpolate, and in transliterations whose delimiters aren't single quotes (C<"'">). X<\t> X<\n> X<\r> X<\f> X<\b> X<\a> X<\e> X<\x> X<\0> X<\c> X<\N> X<\N{}> X<\o{}> Sequence Note Description \t tab (HT, TAB) \n newline (NL) \r return (CR) \f form feed (FF) \b backspace (BS) \a alarm (bell) (BEL) \e escape (ESC) \x{263A} [1,8] hex char (example shown: SMILEY) \x1b [2,8] restricted range hex char (example: ESC) \N{name} [3] named Unicode character or character sequence \N{U+263D} [4,8] Unicode character (example: FIRST QUARTER MOON) \c[ [5] control char (example: chr(27)) \o{23072} [6,8] octal char (example: SMILEY) \033 [7,8] restricted range octal char (example: ESC) =over 4 =item [1] The result is the character specified by the hexadecimal number between the braces. See L</[8]> below for details on which character. Only hexadecimal digits are valid between the braces. If an invalid character is encountered, a warning will be issued and the invalid character and all subsequent characters (valid or invalid) within the braces will be discarded. If there are no valid digits between the braces, the generated character is the NULL character (C<\x{00}>). However, an explicit empty brace (C<\x{}>) will not cause a warning (currently). =item [2] The result is the character specified by the hexadecimal number in the range 0x00 to 0xFF. See L</[8]> below for details on which character. Only hexadecimal digits are valid following C<\x>. When C<\x> is followed by fewer than two valid digits, any valid digits will be zero-padded. This means that C<\x7> will be interpreted as C<\x07>, and a lone C<"\x"> will be interpreted as C<\x00>. Except at the end of a string, having fewer than two valid digits will result in a warning. Note that although the warning says the illegal character is ignored, it is only ignored as part of the escape and will still be used as the subsequent character in the string. For example: Original Result Warns? "\x7" "\x07" no "\x" "\x00" no "\x7q" "\x07q" yes "\xq" "\x00q" yes =item [3] The result is the Unicode character or character sequence given by I<name>. See L<charnames>. =item [4] S<C<\N{U+I<hexadecimal number>}>> means the Unicode character whose Unicode code point is I<hexadecimal number>. =item [5] The character following C<\c> is mapped to some other character as shown in the table: Sequence Value \c@ chr(0) \cA chr(1) \ca chr(1) \cB chr(2) \cb chr(2) ... \cZ chr(26) \cz chr(26) \c[ chr(27) # See below for chr(28) \c] chr(29) \c^ chr(30) \c_ chr(31) \c? chr(127) # (on ASCII platforms; see below for link to # EBCDIC discussion) In other words, it's the character whose code point has had 64 xor'd with its uppercase. C<\c?> is DELETE on ASCII platforms because S<C<ord("?") ^ 64>> is 127, and C<\c@> is NULL because the ord of C<"@"> is 64, so xor'ing 64 itself produces 0. Also, C<\c\I<X>> yields S<C< chr(28) . "I<X>">> for any I<X>, but cannot come at the end of a string, because the backslash would be parsed as escaping the end quote. On ASCII platforms, the resulting characters from the list above are the complete set of ASCII controls. This isn't the case on EBCDIC platforms; see L<perlebcdic/OPERATOR DIFFERENCES> for a full discussion of the differences between these for ASCII versus EBCDIC platforms. Use of any other character following the C<"c"> besides those listed above is discouraged, and as of Perl v5.20, the only characters actually allowed are the printable ASCII ones, minus the left brace C<"{">. What happens for any of the allowed other characters is that the value is derived by xor'ing with the seventh bit, which is 64, and a warning raised if enabled. Using the non-allowed characters generates a fatal error. To get platform independent controls, you can use C<\N{...}>. =item [6] The result is the character specified by the octal number between the braces. See L</[8]> below for details on which character. If a character that isn't an octal digit is encountered, a warning is raised, and the value is based on the octal digits before it, discarding it and all following characters up to the closing brace. It is a fatal error if there are no octal digits at all. =item [7] The result is the character specified by the three-digit octal number in the range 000 to 777 (but best to not use above 077, see next paragraph). See L</[8]> below for details on which character. Some contexts allow 2 or even 1 digit, but any usage without exactly three digits, the first being a zero, may give unintended results. (For example, in a regular expression it may be confused with a backreference; see L<perlrebackslash/Octal escapes>.) Starting in Perl 5.14, you may use C<\o{}> instead, which avoids all these problems. Otherwise, it is best to use this construct only for ordinals C<\077> and below, remembering to pad to the left with zeros to make three digits. For larger ordinals, either use C<\o{}>, or convert to something else, such as to hex and use C<\N{U+}> (which is portable between platforms with different character sets) or C<\x{}> instead. =item [8] Several constructs above specify a character by a number. That number gives the character's position in the character set encoding (indexed from 0). This is called synonymously its ordinal, code position, or code point. Perl works on platforms that have a native encoding currently of either ASCII/Latin1 or EBCDIC, each of which allow specification of 256 characters. In general, if the number is 255 (0xFF, 0377) or below, Perl interprets this in the platform's native encoding. If the number is 256 (0x100, 0400) or above, Perl interprets it as a Unicode code point and the result is the corresponding Unicode character. For example C<\x{50}> and C<\o{120}> both are the number 80 in decimal, which is less than 256, so the number is interpreted in the native character set encoding. In ASCII the character in the 80th position (indexed from 0) is the letter C<"P">, and in EBCDIC it is the ampersand symbol C<"&">. C<\x{100}> and C<\o{400}> are both 256 in decimal, so the number is interpreted as a Unicode code point no matter what the native encoding is. The name of the character in the 256th position (indexed by 0) in Unicode is C<LATIN CAPITAL LETTER A WITH MACRON>. An exception to the above rule is that S<C<\N{U+I<hex number>}>> is always interpreted as a Unicode code point, so that C<\N{U+0050}> is C<"P"> even on EBCDIC platforms. =back B<NOTE>: Unlike C and other languages, Perl has no C<\v> escape sequence for the vertical tab (VT, which is 11 in both ASCII and EBCDIC), but you may use C<\N{VT}>, C<\ck>, C<\N{U+0b}>, or C<\x0b>. (C<\v> does have meaning in regular expression patterns in Perl, see L<perlre>.) The following escape sequences are available in constructs that interpolate, but not in transliterations. X<\l> X<\u> X<\L> X<\U> X<\E> X<\Q> X<\F> \l lowercase next character only \u titlecase (not uppercase!) next character only \L lowercase all characters till \E or end of string \U uppercase all characters till \E or end of string \F foldcase all characters till \E or end of string \Q quote (disable) pattern metacharacters till \E or end of string \E end either case modification or quoted section (whichever was last seen) See L<perlfunc/quotemeta> for the exact definition of characters that are quoted by C<\Q>. C<\L>, C<\U>, C<\F>, and C<\Q> can stack, in which case you need one C<\E> for each. For example: say"This \Qquoting \ubusiness \Uhere isn't quite\E done yet,\E is it?"; This quoting\ Business\ HERE\ ISN\'T\ QUITE\ done\ yet\, is it? If a S<C<use locale>> form that includes C<LC_CTYPE> is in effect (see L<perllocale>), the case map used by C<\l>, C<\L>, C<\u>, and C<\U> is taken from the current locale. If Unicode (for example, C<\N{}> or code points of 0x100 or beyond) is being used, the case map used by C<\l>, C<\L>, C<\u>, and C<\U> is as defined by Unicode. That means that case-mapping a single character can sometimes produce a sequence of several characters. Under S<C<use locale>>, C<\F> produces the same results as C<\L> for all locales but a UTF-8 one, where it instead uses the Unicode definition. All systems use the virtual C<"\n"> to represent a line terminator, called a "newline". There is no such thing as an unvarying, physical newline character. It is only an illusion that the operating system, device drivers, C libraries, and Perl all conspire to preserve. Not all systems read C<"\r"> as ASCII CR and C<"\n"> as ASCII LF. For example, on the ancient Macs (pre-MacOS X) of yesteryear, these used to be reversed, and on systems without a line terminator, printing C<"\n"> might emit no actual data. In general, use C<"\n"> when you mean a "newline" for your system, but use the literal ASCII when you need an exact character. For example, most networking protocols expect and prefer a CR+LF (C<"\015\012"> or C<"\cM\cJ">) for line terminators, and although they often accept just C<"\012">, they seldom tolerate just C<"\015">. If you get in the habit of using C<"\n"> for networking, you may be burned some day. X<newline> X<line terminator> X<eol> X<end of line> X<\n> X<\r> X<\r\n> For constructs that do interpolate, variables beginning with "C<$>" or "C<@>" are interpolated. Subscripted variables such as C<$a[3]> or C<< $href->{key}[0] >> are also interpolated, as are array and hash slices. But method calls such as C<< $obj->meth >> are not. Interpolating an array or slice interpolates the elements in order, separated by the value of C<$">, so is equivalent to interpolating S<C<join $", @array>>. "Punctuation" arrays such as C<@*> are usually interpolated only if the name is enclosed in braces C<@{*}>, but the arrays C<@_>, C<@+>, and C<@-> are interpolated even without braces. For double-quoted strings, the quoting from C<\Q> is applied after interpolation and escapes are processed. "abc\Qfoo\tbar$s\Exyz" is equivalent to "abc" . quotemeta("foo\tbar$s") . "xyz" For the pattern of regex operators (C<qr//>, C<m//> and C<s///>), the quoting from C<\Q> is applied after interpolation is processed, but before escapes are processed. This allows the pattern to match literally (except for C<$> and C<@>). For example, the following matches: '\s\t' =~ /\Q\s\t/ Because C<$> or C<@> trigger interpolation, you'll need to use something like C</\Quser\E\@\Qhost/> to match them literally. Patterns are subject to an additional level of interpretation as a regular expression. This is done as a second pass, after variables are interpolated, so that regular expressions may be incorporated into the pattern from the variables. If this is not what you want, use C<\Q> to interpolate a variable literally. Apart from the behavior described above, Perl does not expand multiple levels of interpolation. In particular, contrary to the expectations of shell programmers, back-quotes do I<NOT> interpolate within double quotes, nor do single quotes impede evaluation of variables when used within double quotes. =head2 Regexp Quote-Like Operators X<operator, regexp> Here are the quote-like operators that apply to pattern matching and related activities. =over 8 =item C<qr/I<STRING>/msixpodualn> X<qr> X</i> X</m> X</o> X</s> X</x> X</p> This operator quotes (and possibly compiles) its I<STRING> as a regular expression. I<STRING> is interpolated the same way as I<PATTERN> in C<m/I<PATTERN>/>. If C<"'"> is used as the delimiter, no variable interpolation is done. Returns a Perl value which may be used instead of the corresponding C</I<STRING>/msixpodualn> expression. The returned value is a normalized version of the original pattern. It magically differs from a string containing the same characters: C<ref(qr/x/)> returns "Regexp"; however, dereferencing it is not well defined (you currently get the normalized version of the original pattern, but this may change). For example, $rex = qr/my.STRING/is; print $rex; # prints (?si-xm:my.STRING) s/$rex/foo/; is equivalent to s/my.STRING/foo/is; The result may be used as a subpattern in a match: $re = qr/$pattern/; $string =~ /foo${re}bar/; # can be interpolated in other # patterns $string =~ $re; # or used standalone $string =~ /$re/; # or this way Since Perl may compile the pattern at the moment of execution of the C<qr()> operator, using C<qr()> may have speed advantages in some situations, notably if the result of C<qr()> is used standalone: sub match { my $patterns = shift; my @compiled = map qr/$_/i, @$patterns; grep { my $success = 0; foreach my $pat (@compiled) { $success = 1, last if /$pat/; } $success; } @_; } Precompilation of the pattern into an internal representation at the moment of C<qr()> avoids the need to recompile the pattern every time a match C</$pat/> is attempted. (Perl has many other internal optimizations, but none would be triggered in the above example if we did not use C<qr()> operator.) Options (specified by the following modifiers) are: m Treat string as multiple lines. s Treat string as single line. (Make . match a newline) i Do case-insensitive pattern matching. x Use extended regular expressions; specifying two x's means \t and the SPACE character are ignored within square-bracketed character classes p When matching preserve a copy of the matched string so that ${^PREMATCH}, ${^MATCH}, ${^POSTMATCH} will be defined (ignored starting in v5.20) as these are always defined starting in that release o Compile pattern only once. a ASCII-restrict: Use ASCII for \d, \s, \w and [[:posix:]] character classes; specifying two a's adds the further restriction that no ASCII character will match a non-ASCII one under /i. l Use the current run-time locale's rules. u Use Unicode rules. d Use Unicode or native charset, as in 5.12 and earlier. n Non-capture mode. Don't let () fill in $1, $2, etc... If a precompiled pattern is embedded in a larger pattern then the effect of C<"msixpluadn"> will be propagated appropriately. The effect that the C</o> modifier has is not propagated, being restricted to those patterns explicitly using it. The C</a>, C</d>, C</l>, and C</u> modifiers (added in Perl 5.14) control the character set rules, but C</a> is the only one you are likely to want to specify explicitly; the other three are selected automatically by various pragmas. See L<perlre> for additional information on valid syntax for I<STRING>, and for a detailed look at the semantics of regular expressions. In particular, all modifiers except the largely obsolete C</o> are further explained in L<perlre/Modifiers>. C</o> is described in the next section. =item C<m/I<PATTERN>/msixpodualngc> X<m> X<operator, match> X<regexp, options> X<regexp> X<regex, options> X<regex> X</m> X</s> X</i> X</x> X</p> X</o> X</g> X</c> =item C</I<PATTERN>/msixpodualngc> Searches a string for a pattern match, and in scalar context returns true if it succeeds, false if it fails. If no string is specified via the C<=~> or C<!~> operator, the C<$_> string is searched. (The string specified with C<=~> need not be an lvalue--it may be the result of an expression evaluation, but remember the C<=~> binds rather tightly.) See also L<perlre>. Options are as described in C<qr//> above; in addition, the following match process modifiers are available: g Match globally, i.e., find all occurrences. c Do not reset search position on a failed match when /g is in effect. If C<"/"> is the delimiter then the initial C<m> is optional. With the C<m> you can use any pair of non-whitespace (ASCII) characters as delimiters. This is particularly useful for matching path names that contain C<"/">, to avoid LTS (leaning toothpick syndrome). If C<"?"> is the delimiter, then a match-only-once rule applies, described in C<m?I<PATTERN>?> below. If C<"'"> (single quote) is the delimiter, no variable interpolation is performed on the I<PATTERN>. When using a delimiter character valid in an identifier, whitespace is required after the C<m>. I<PATTERN> may contain variables, which will be interpolated every time the pattern search is evaluated, except for when the delimiter is a single quote. (Note that C<$(>, C<$)>, and C<$|> are not interpolated because they look like end-of-string tests.) Perl will not recompile the pattern unless an interpolated variable that it contains changes. You can force Perl to skip the test and never recompile by adding a C</o> (which stands for "once") after the trailing delimiter. Once upon a time, Perl would recompile regular expressions unnecessarily, and this modifier was useful to tell it not to do so, in the interests of speed. But now, the only reasons to use C</o> are one of: =over =item 1 The variables are thousands of characters long and you know that they don't change, and you need to wring out the last little bit of speed by having Perl skip testing for that. (There is a maintenance penalty for doing this, as mentioning C</o> constitutes a promise that you won't change the variables in the pattern. If you do change them, Perl won't even notice.) =item 2 you want the pattern to use the initial values of the variables regardless of whether they change or not. (But there are saner ways of accomplishing this than using C</o>.) =item 3 If the pattern contains embedded code, such as use re 'eval'; $code = 'foo(?{ $x })'; /$code/ then perl will recompile each time, even though the pattern string hasn't changed, to ensure that the current value of C<$x> is seen each time. Use C</o> if you want to avoid this. =back The bottom line is that using C</o> is almost never a good idea. =item The empty pattern C<//> If the I<PATTERN> evaluates to the empty string, the last I<successfully> matched regular expression is used instead. In this case, only the C<g> and C<c> flags on the empty pattern are honored; the other flags are taken from the original pattern. If no match has previously succeeded, this will (silently) act instead as a genuine empty pattern (which will always match). Note that it's possible to confuse Perl into thinking C<//> (the empty regex) is really C<//> (the defined-or operator). Perl is usually pretty good about this, but some pathological cases might trigger this, such as C<$x///> (is that S<C<($x) / (//)>> or S<C<$x // />>?) and S<C<print $fh //>> (S<C<print $fh(//>> or S<C<print($fh //>>?). In all of these examples, Perl will assume you meant defined-or. If you meant the empty regex, just use parentheses or spaces to disambiguate, or even prefix the empty regex with an C<m> (so C<//> becomes C<m//>). =item Matching in list context If the C</g> option is not used, C<m//> in list context returns a list consisting of the subexpressions matched by the parentheses in the pattern, that is, (C<$1>, C<$2>, C<$3>...) (Note that here C<$1> etc. are also set). When there are no parentheses in the pattern, the return value is the list C<(1)> for success. With or without parentheses, an empty list is returned upon failure. Examples: open(TTY, "+</dev/tty") || die "can't access /dev/tty: $!"; <TTY> =~ /^y/i && foo(); # do foo if desired if (/Version: *([0-9.]*)/) { $version = $1; } next if m#^/usr/spool/uucp#; # poor man's grep $arg = shift; while (<>) { print if /$arg/o; # compile only once (no longer needed!) } if (($F1, $F2, $Etc) = ($foo =~ /^(\S+)\s+(\S+)\s*(.*)/)) This last example splits C<$foo> into the first two words and the remainder of the line, and assigns those three fields to C<$F1>, C<$F2>, and C<$Etc>. The conditional is true if any variables were assigned; that is, if the pattern matched. The C</g> modifier specifies global pattern matching--that is, matching as many times as possible within the string. How it behaves depends on the context. In list context, it returns a list of the substrings matched by any capturing parentheses in the regular expression. If there are no parentheses, it returns a list of all the matched strings, as if there were parentheses around the whole pattern. In scalar context, each execution of C<m//g> finds the next match, returning true if it matches, and false if there is no further match. The position after the last match can be read or set using the C<pos()> function; see L<perlfunc/pos>. A failed match normally resets the search position to the beginning of the string, but you can avoid that by adding the C</c> modifier (for example, C<m//gc>). Modifying the target string also resets the search position. =item C<\G I<assertion>> You can intermix C<m//g> matches with C<m/\G.../g>, where C<\G> is a zero-width assertion that matches the exact position where the previous C<m//g>, if any, left off. Without the C</g> modifier, the C<\G> assertion still anchors at C<pos()> as it was at the start of the operation (see L<perlfunc/pos>), but the match is of course only attempted once. Using C<\G> without C</g> on a target string that has not previously had a C</g> match applied to it is the same as using the C<\A> assertion to match the beginning of the string. Note also that, currently, C<\G> is only properly supported when anchored at the very beginning of the pattern. Examples: # list context ($one,$five,$fifteen) = (`uptime` =~ /(\d+\.\d+)/g); # scalar context local $/ = ""; while ($paragraph = <>) { while ($paragraph =~ /\p{Ll}['")]*[.!?]+['")]*\s/g) { $sentences++; } } say $sentences; Here's another way to check for sentences in a paragraph: my $sentence_rx = qr{ (?: (?<= ^ ) | (?<= \s ) ) # after start-of-string or # whitespace \p{Lu} # capital letter .*? # a bunch of anything (?<= \S ) # that ends in non- # whitespace (?<! \b [DMS]r ) # but isn't a common abbr. (?<! \b Mrs ) (?<! \b Sra ) (?<! \b St ) [.?!] # followed by a sentence # ender (?= $ | \s ) # in front of end-of-string # or whitespace }sx; local $/ = ""; while (my $paragraph = <>) { say "NEW PARAGRAPH"; my $count = 0; while ($paragraph =~ /($sentence_rx)/g) { printf "\tgot sentence %d: <%s>\n", ++$count, $1; } } Here's how to use C<m//gc> with C<\G>: $_ = "ppooqppqq"; while ($i++ < 2) { print "1: '"; print $1 while /(o)/gc; print "', pos=", pos, "\n"; print "2: '"; print $1 if /\G(q)/gc; print "', pos=", pos, "\n"; print "3: '"; print $1 while /(p)/gc; print "', pos=", pos, "\n"; } print "Final: '$1', pos=",pos,"\n" if /\G(.)/; The last example should print: 1: 'oo', pos=4 2: 'q', pos=5 3: 'pp', pos=7 1: '', pos=7 2: 'q', pos=8 3: '', pos=8 Final: 'q', pos=8 Notice that the final match matched C<q> instead of C<p>, which a match without the C<\G> anchor would have done. Also note that the final match did not update C<pos>. C<pos> is only updated on a C</g> match. If the final match did indeed match C<p>, it's a good bet that you're running an ancient (pre-5.6.0) version of Perl. A useful idiom for C<lex>-like scanners is C</\G.../gc>. You can combine several regexps like this to process a string part-by-part, doing different actions depending on which regexp matched. Each regexp tries to match where the previous one leaves off. $_ = <<'EOL'; $url = URI::URL->new( "http://example.com/" ); die if $url eq "xXx"; EOL LOOP: { print(" digits"), redo LOOP if /\G\d+\b[,.;]?\s*/gc; print(" lowercase"), redo LOOP if /\G\p{Ll}+\b[,.;]?\s*/gc; print(" UPPERCASE"), redo LOOP if /\G\p{Lu}+\b[,.;]?\s*/gc; print(" Capitalized"), redo LOOP if /\G\p{Lu}\p{Ll}+\b[,.;]?\s*/gc; print(" MiXeD"), redo LOOP if /\G\pL+\b[,.;]?\s*/gc; print(" alphanumeric"), redo LOOP if /\G[\p{Alpha}\pN]+\b[,.;]?\s*/gc; print(" line-noise"), redo LOOP if /\G\W+/gc; print ". That's all!\n"; } Here is the output (split into several lines): line-noise lowercase line-noise UPPERCASE line-noise UPPERCASE line-noise lowercase line-noise lowercase line-noise lowercase lowercase line-noise lowercase lowercase line-noise lowercase lowercase line-noise MiXeD line-noise. That's all! =item C<m?I<PATTERN>?msixpodualngc> X<?> X<operator, match-once> This is just like the C<m/I<PATTERN>/> search, except that it matches only once between calls to the C<reset()> operator. This is a useful optimization when you want to see only the first occurrence of something in each file of a set of files, for instance. Only C<m??> patterns local to the current package are reset. while (<>) { if (m?^$?) { # blank line between header and body } } continue { reset if eof; # clear m?? status for next file } Another example switched the first "latin1" encoding it finds to "utf8" in a pod file: s//utf8/ if m? ^ =encoding \h+ \K latin1 ?x; The match-once behavior is controlled by the match delimiter being C<?>; with any other delimiter this is the normal C<m//> operator. In the past, the leading C<m> in C<m?I<PATTERN>?> was optional, but omitting it would produce a deprecation warning. As of v5.22.0, omitting it produces a syntax error. If you encounter this construct in older code, you can just add C<m>. =item C<s/I<PATTERN>/I<REPLACEMENT>/msixpodualngcer> X<s> X<substitute> X<substitution> X<replace> X<regexp, replace> X<regexp, substitute> X</m> X</s> X</i> X</x> X</p> X</o> X</g> X</c> X</e> X</r> Searches a string for a pattern, and if found, replaces that pattern with the replacement text and returns the number of substitutions made. Otherwise it returns false (a value that is both an empty string (C<"">) and numeric zero (C<0>) as described in L</Relational Operators>). If the C</r> (non-destructive) option is used then it runs the substitution on a copy of the string and instead of returning the number of substitutions, it returns the copy whether or not a substitution occurred. The original string is never changed when C</r> is used. The copy will always be a plain string, even if the input is an object or a tied variable. If no string is specified via the C<=~> or C<!~> operator, the C<$_> variable is searched and modified. Unless the C</r> option is used, the string specified must be a scalar variable, an array element, a hash element, or an assignment to one of those; that is, some sort of scalar lvalue. If the delimiter chosen is a single quote, no variable interpolation is done on either the I<PATTERN> or the I<REPLACEMENT>. Otherwise, if the I<PATTERN> contains a C<$> that looks like a variable rather than an end-of-string test, the variable will be interpolated into the pattern at run-time. If you want the pattern compiled only once the first time the variable is interpolated, use the C</o> option. If the pattern evaluates to the empty string, the last successfully executed regular expression is used instead. See L<perlre> for further explanation on these. Options are as with C<m//> with the addition of the following replacement specific options: e Evaluate the right side as an expression. ee Evaluate the right side as a string then eval the result. r Return substitution and leave the original string untouched. Any non-whitespace delimiter may replace the slashes. Add space after the C<s> when using a character allowed in identifiers. If single quotes are used, no interpretation is done on the replacement string (the C</e> modifier overrides this, however). Note that Perl treats backticks as normal delimiters; the replacement text is not evaluated as a command. If the I<PATTERN> is delimited by bracketing quotes, the I<REPLACEMENT> has its own pair of quotes, which may or may not be bracketing quotes, for example, C<s(foo)(bar)> or C<< s<foo>/bar/ >>. A C</e> will cause the replacement portion to be treated as a full-fledged Perl expression and evaluated right then and there. It is, however, syntax checked at compile-time. A second C<e> modifier will cause the replacement portion to be C<eval>ed before being run as a Perl expression. Examples: s/\bgreen\b/mauve/g; # don't change wintergreen $path =~ s|/usr/bin|/usr/local/bin|; s/Login: $foo/Login: $bar/; # run-time pattern ($foo = $bar) =~ s/this/that/; # copy first, then # change ($foo = "$bar") =~ s/this/that/; # convert to string, # copy, then change $foo = $bar =~ s/this/that/r; # Same as above using /r $foo = $bar =~ s/this/that/r =~ s/that/the other/r; # Chained substitutes # using /r @foo = map { s/this/that/r } @bar # /r is very useful in # maps $count = ($paragraph =~ s/Mister\b/Mr./g); # get change-cnt $_ = 'abc123xyz'; s/\d+/$&*2/e; # yields 'abc246xyz' s/\d+/sprintf("%5d",$&)/e; # yields 'abc 246xyz' s/\w/$& x 2/eg; # yields 'aabbcc 224466xxyyzz' s/%(.)/$percent{$1}/g; # change percent escapes; no /e s/%(.)/$percent{$1} || $&/ge; # expr now, so /e s/^=(\w+)/pod($1)/ge; # use function call $_ = 'abc123xyz'; $x = s/abc/def/r; # $x is 'def123xyz' and # $_ remains 'abc123xyz'. # expand variables in $_, but dynamics only, using # symbolic dereferencing s/\$(\w+)/${$1}/g; # Add one to the value of any numbers in the string s/(\d+)/1 + $1/eg; # Titlecase words in the last 30 characters only substr($str, -30) =~ s/\b(\p{Alpha}+)\b/\u\L$1/g; # This will expand any embedded scalar variable # (including lexicals) in $_ : First $1 is interpolated # to the variable name, and then evaluated s/(\$\w+)/$1/eeg; # Delete (most) C comments. $program =~ s { /\* # Match the opening delimiter. .*? # Match a minimal number of characters. \*/ # Match the closing delimiter. } []gsx; s/^\s*(.*?)\s*$/$1/; # trim whitespace in $_, # expensively for ($variable) { # trim whitespace in $variable, # cheap s/^\s+//; s/\s+$//; } s/([^ ]*) *([^ ]*)/$2 $1/; # reverse 1st two fields $foo !~ s/A/a/g; # Lowercase all A's in $foo; return # 0 if any were found and changed; # otherwise return 1 Note the use of C<$> instead of C<\> in the last example. Unlike B<sed>, we use the \<I<digit>> form only in the left hand side. Anywhere else it's $<I<digit>>. Occasionally, you can't use just a C</g> to get all the changes to occur that you might want. Here are two common cases: # put commas in the right places in an integer 1 while s/(\d)(\d\d\d)(?!\d)/$1,$2/g; # expand tabs to 8-column spacing 1 while s/\t+/' ' x (length($&)*8 - length($`)%8)/e; X</c>While C<s///> accepts the C</c> flag, it has no effect beyond producing a warning if warnings are enabled. =back =head2 Quote-Like Operators X<operator, quote-like> =over 4 =item C<q/I<STRING>/> X<q> X<quote, single> X<'> X<''> =item C<'I<STRING>'> A single-quoted, literal string. A backslash represents a backslash unless followed by the delimiter or another backslash, in which case the delimiter or backslash is interpolated. $foo = q!I said, "You said, 'She said it.'"!; $bar = q('This is it.'); $baz = '\n'; # a two-character string =item C<qq/I<STRING>/> X<qq> X<quote, double> X<"> X<""> =item C<"I<STRING>"> A double-quoted, interpolated string. $_ .= qq (*** The previous line contains the naughty word "$1".\n) if /\b(tcl|java|python)\b/i; # :-) $baz = "\n"; # a one-character string =item C<qx/I<STRING>/> X<qx> X<`> X<``> X<backtick> =item C<`I<STRING>`> A string which is (possibly) interpolated and then executed as a system command, via F</bin/sh> or its equivalent if required. Shell wildcards, pipes, and redirections will be honored. Similarly to C<system>, if the string contains no shell metacharacters then it will executed directly. The collected standard output of the command is returned; standard error is unaffected. In scalar context, it comes back as a single (potentially multi-line) string, or C<undef> if the shell (or command) could not be started. In list context, returns a list of lines (however you've defined lines with C<$/> or C<$INPUT_RECORD_SEPARATOR>), or an empty list if the shell (or command) could not be started. Because backticks do not affect standard error, use shell file descriptor syntax (assuming the shell supports this) if you care to address this. To capture a command's STDERR and STDOUT together: $output = `cmd 2>&1`; To capture a command's STDOUT but discard its STDERR: $output = `cmd 2>/dev/null`; To capture a command's STDERR but discard its STDOUT (ordering is important here): $output = `cmd 2>&1 1>/dev/null`; To exchange a command's STDOUT and STDERR in order to capture the STDERR but leave its STDOUT to come out the old STDERR: $output = `cmd 3>&1 1>&2 2>&3 3>&-`; To read both a command's STDOUT and its STDERR separately, it's easiest to redirect them separately to files, and then read from those files when the program is done: system("program args 1>program.stdout 2>program.stderr"); The STDIN filehandle used by the command is inherited from Perl's STDIN. For example: open(SPLAT, "stuff") || die "can't open stuff: $!"; open(STDIN, "<&SPLAT") || die "can't dupe SPLAT: $!"; print STDOUT `sort`; will print the sorted contents of the file named F<"stuff">. Using single-quote as a delimiter protects the command from Perl's double-quote interpolation, passing it on to the shell instead: $perl_info = qx(ps $$); # that's Perl's $$ $shell_info = qx'ps $$'; # that's the new shell's $$ How that string gets evaluated is entirely subject to the command interpreter on your system. On most platforms, you will have to protect shell metacharacters if you want them treated literally. This is in practice difficult to do, as it's unclear how to escape which characters. See L<perlsec> for a clean and safe example of a manual C<fork()> and C<exec()> to emulate backticks safely. On some platforms (notably DOS-like ones), the shell may not be capable of dealing with multiline commands, so putting newlines in the string may not get you what you want. You may be able to evaluate multiple commands in a single line by separating them with the command separator character, if your shell supports that (for example, C<;> on many Unix shells and C<&> on the Windows NT C<cmd> shell). Perl will attempt to flush all files opened for output before starting the child process, but this may not be supported on some platforms (see L<perlport>). To be safe, you may need to set C<$|> (C<$AUTOFLUSH> in C<L<English>>) or call the C<autoflush()> method of C<L<IO::Handle>> on any open handles. Beware that some command shells may place restrictions on the length of the command line. You must ensure your strings don't exceed this limit after any necessary interpolations. See the platform-specific release notes for more details about your particular environment. Using this operator can lead to programs that are difficult to port, because the shell commands called vary between systems, and may in fact not be present at all. As one example, the C<type> command under the POSIX shell is very different from the C<type> command under DOS. That doesn't mean you should go out of your way to avoid backticks when they're the right way to get something done. Perl was made to be a glue language, and one of the things it glues together is commands. Just understand what you're getting yourself into. Like C<system>, backticks put the child process exit code in C<$?>. If you'd like to manually inspect failure, you can check all possible failure modes by inspecting C<$?> like this: if ($? == -1) { print "failed to execute: $!\n"; } elsif ($? & 127) { printf "child died with signal %d, %s coredump\n", ($? & 127), ($? & 128) ? 'with' : 'without'; } else { printf "child exited with value %d\n", $? >> 8; } Use the L<open> pragma to control the I/O layers used when reading the output of the command, for example: use open IN => ":encoding(UTF-8)"; my $x = `cmd-producing-utf-8`; C<qx//> can also be called like a function with L<perlfunc/readpipe>. See L</"I/O Operators"> for more discussion. =item C<qw/I<STRING>/> X<qw> X<quote, list> X<quote, words> Evaluates to a list of the words extracted out of I<STRING>, using embedded whitespace as the word delimiters. It can be understood as being roughly equivalent to: split(" ", q/STRING/); the differences being that it only splits on ASCII whitespace, generates a real list at compile time, and in scalar context it returns the last element in the list. So this expression: qw(foo bar baz) is semantically equivalent to the list: "foo", "bar", "baz" Some frequently seen examples: use POSIX qw( setlocale localeconv ) @EXPORT = qw( foo bar baz ); A common mistake is to try to separate the words with commas or to put comments into a multi-line C<qw>-string. For this reason, the S<C<use warnings>> pragma and the B<-w> switch (that is, the C<$^W> variable) produces warnings if the I<STRING> contains the C<","> or the C<"#"> character. =item C<tr/I<SEARCHLIST>/I<REPLACEMENTLIST>/cdsr> X<tr> X<y> X<transliterate> X</c> X</d> X</s> =item C<y/I<SEARCHLIST>/I<REPLACEMENTLIST>/cdsr> Transliterates all occurrences of the characters found (or not found if the C</c> modifier is specified) in the search list with the positionally corresponding character in the replacement list, possibly deleting some, depending on the modifiers specified. It returns the number of characters replaced or deleted. If no string is specified via the C<=~> or C<!~> operator, the C<$_> string is transliterated. For B<sed> devotees, C<y> is provided as a synonym for C<tr>. If the C</r> (non-destructive) option is present, a new copy of the string is made and its characters transliterated, and this copy is returned no matter whether it was modified or not: the original string is always left unchanged. The new copy is always a plain string, even if the input string is an object or a tied variable. Unless the C</r> option is used, the string specified with C<=~> must be a scalar variable, an array element, a hash element, or an assignment to one of those; in other words, an lvalue. If the characters delimiting I<SEARCHLIST> and I<REPLACEMENTLIST> are single quotes (C<tr'I<SEARCHLIST>'I<REPLACEMENTLIST>'>), the only interpolation is removal of C<\> from pairs of C<\\>. Otherwise, a character range may be specified with a hyphen, so C<tr/A-J/0-9/> does the same replacement as C<tr/ACEGIBDFHJ/0246813579/>. If the I<SEARCHLIST> is delimited by bracketing quotes, the I<REPLACEMENTLIST> must have its own pair of quotes, which may or may not be bracketing quotes; for example, C<tr[aeiouy][yuoiea]> or C<tr(+\-*/)/ABCD/>. Characters may be literals, or (if the delimiters aren't single quotes) any of the escape sequences accepted in double-quoted strings. But there is never any variable interpolation, so C<"$"> and C<"@"> are always treated as literals. A hyphen at the beginning or end, or preceded by a backslash is also always considered a literal. Escape sequence details are in L<the table near the beginning of this section|/Quote and Quote-like Operators>. Note that C<tr> does B<not> do regular expression character classes such as C<\d> or C<\pL>. The C<tr> operator is not equivalent to the C<L<tr(1)>> utility. C<tr[a-z][A-Z]> will uppercase the 26 letters "a" through "z", but for case changing not confined to ASCII, use L<C<lc>|perlfunc/lc>, L<C<uc>|perlfunc/uc>, L<C<lcfirst>|perlfunc/lcfirst>, L<C<ucfirst>|perlfunc/ucfirst> (all documented in L<perlfunc>), or the L<substitution operator C<sE<sol>I<PATTERN>E<sol>I<REPLACEMENT>E<sol>>|/sE<sol>PATTERNE<sol>REPLACEMENTE<sol>msixpodualngcer> (with C<\U>, C<\u>, C<\L>, and C<\l> string-interpolation escapes in the I<REPLACEMENT> portion). Most ranges are unportable between character sets, but certain ones signal Perl to do special handling to make them portable. There are two classes of portable ranges. The first are any subsets of the ranges C<A-Z>, C<a-z>, and C<0-9>, when expressed as literal characters. tr/h-k/H-K/ capitalizes the letters C<"h">, C<"i">, C<"j">, and C<"k"> and nothing else, no matter what the platform's character set is. In contrast, all of tr/\x68-\x6B/\x48-\x4B/ tr/h-\x6B/H-\x4B/ tr/\x68-k/\x48-K/ do the same capitalizations as the previous example when run on ASCII platforms, but something completely different on EBCDIC ones. The second class of portable ranges is invoked when one or both of the range's end points are expressed as C<\N{...}> $string =~ tr/\N{U+20}-\N{U+7E}//d; removes from C<$string> all the platform's characters which are equivalent to any of Unicode U+0020, U+0021, ... U+007D, U+007E. This is a portable range, and has the same effect on every platform it is run on. In this example, these are the ASCII printable characters. So after this is run, C<$string> has only controls and characters which have no ASCII equivalents. But, even for portable ranges, it is not generally obvious what is included without having to look things up in the manual. A sound principle is to use only ranges that both begin from, and end at, either ASCII alphabetics of equal case (C<b-e>, C<B-E>), or digits (C<1-4>). Anything else is unclear (and unportable unless C<\N{...}> is used). If in doubt, spell out the character sets in full. Options: c Complement the SEARCHLIST. d Delete found but unreplaced characters. r Return the modified string and leave the original string untouched. s Squash duplicate replaced characters. If the C</d> modifier is specified, any characters specified by I<SEARCHLIST> not found in I<REPLACEMENTLIST> are deleted. (Note that this is slightly more flexible than the behavior of some B<tr> programs, which delete anything they find in the I<SEARCHLIST>, period.) If the C</s> modifier is specified, sequences of characters, all in a row, that were transliterated to the same character are squashed down to a single instance of that character. my $a = "aaaba" $a =~ tr/a/a/s # $a now is "aba" If the C</d> modifier is used, the I<REPLACEMENTLIST> is always interpreted exactly as specified. Otherwise, if the I<REPLACEMENTLIST> is shorter than the I<SEARCHLIST>, the final character, if any, is replicated until it is long enough. There won't be a final character if and only if the I<REPLACEMENTLIST> is empty, in which case I<REPLACEMENTLIST> is copied from I<SEARCHLIST>. An empty I<REPLACEMENTLIST> is useful for counting characters in a class, or for squashing character sequences in a class. tr/abcd// tr/abcd/abcd/ tr/abcd/AB/ tr/abcd/ABBB/ tr/abcd//d s/[abcd]//g tr/abcd/AB/d (tr/ab/AB/ + s/[cd]//g) - but run together If the C</c> modifier is specified, the characters to be transliterated are the ones NOT in I<SEARCHLIST>, that is, it is complemented. If C</d> and/or C</s> are also specified, they apply to the complemented I<SEARCHLIST>. Recall, that if I<REPLACEMENTLIST> is empty (except under C</d>) a copy of I<SEARCHLIST> is used instead. That copy is made after complementing under C</c>. I<SEARCHLIST> is sorted by code point order after complementing, and any I<REPLACEMENTLIST> is applied to that sorted result. This means that under C</c>, the order of the characters specified in I<SEARCHLIST> is irrelevant. This can lead to different results on EBCDIC systems if I<REPLACEMENTLIST> contains more than one character, hence it is generally non-portable to use C</c> with such a I<REPLACEMENTLIST>. Another way of describing the operation is this: If C</c> is specified, the I<SEARCHLIST> is sorted by code point order, then complemented. If I<REPLACEMENTLIST> is empty and C</d> is not specified, I<REPLACEMENTLIST> is replaced by a copy of I<SEARCHLIST> (as modified under C</c>), and these potentially modified lists are used as the basis for what follows. Any character in the target string that isn't in I<SEARCHLIST> is passed through unchanged. Every other character in the target string is replaced by the character in I<REPLACEMENTLIST> that positionally corresponds to its mate in I<SEARCHLIST>, except that under C</s>, the 2nd and following characters are squeezed out in a sequence of characters in a row that all translate to the same character. If I<SEARCHLIST> is longer than I<REPLACEMENTLIST>, characters in the target string that match a character in I<SEARCHLIST> that doesn't have a correspondence in I<REPLACEMENTLIST> are either deleted from the target string if C</d> is specified; or replaced by the final character in I<REPLACEMENTLIST> if C</d> isn't specified. Some examples: $ARGV[1] =~ tr/A-Z/a-z/; # canonicalize to lower case ASCII $cnt = tr/*/*/; # count the stars in $_ $cnt = tr/*//; # same thing $cnt = $sky =~ tr/*/*/; # count the stars in $sky $cnt = $sky =~ tr/*//; # same thing $cnt = $sky =~ tr/*//c; # count all the non-stars in $sky $cnt = $sky =~ tr/*/*/c; # same, but transliterate each non-star # into a star, leaving the already-stars # alone. Afterwards, everything in $sky # is a star. $cnt = tr/0-9//; # count the ASCII digits in $_ tr/a-zA-Z//s; # bookkeeper -> bokeper tr/o/o/s; # bookkeeper -> bokkeeper tr/oe/oe/s; # bookkeeper -> bokkeper tr/oe//s; # bookkeeper -> bokkeper tr/oe/o/s; # bookkeeper -> bokkopor ($HOST = $host) =~ tr/a-z/A-Z/; $HOST = $host =~ tr/a-z/A-Z/r; # same thing $HOST = $host =~ tr/a-z/A-Z/r # chained with s///r =~ s/:/ -p/r; tr/a-zA-Z/ /cs; # change non-alphas to single space @stripped = map tr/a-zA-Z/ /csr, @original; # /r with map tr [\200-\377] [\000-\177]; # wickedly delete 8th bit $foo !~ tr/A/a/ # transliterate all the A's in $foo to 'a', # return 0 if any were found and changed. # Otherwise return 1 If multiple transliterations are given for a character, only the first one is used: tr/AAA/XYZ/ will transliterate any A to X. Because the transliteration table is built at compile time, neither the I<SEARCHLIST> nor the I<REPLACEMENTLIST> are subjected to double quote interpolation. That means that if you want to use variables, you must use an C<eval()>: eval "tr/$oldlist/$newlist/"; die $@ if $@; eval "tr/$oldlist/$newlist/, 1" or die $@; =item C<< <<I<EOF> >> X<here-doc> X<heredoc> X<here-document> X<<< << >>> A line-oriented form of quoting is based on the shell "here-document" syntax. Following a C<< << >> you specify a string to terminate the quoted material, and all lines following the current line down to the terminating string are the value of the item. Prefixing the terminating string with a C<~> specifies that you want to use L</Indented Here-docs> (see below). The terminating string may be either an identifier (a word), or some quoted text. An unquoted identifier works like double quotes. There may not be a space between the C<< << >> and the identifier, unless the identifier is explicitly quoted. The terminating string must appear by itself (unquoted and with no surrounding whitespace) on the terminating line. If the terminating string is quoted, the type of quotes used determine the treatment of the text. =over 4 =item Double Quotes Double quotes indicate that the text will be interpolated using exactly the same rules as normal double quoted strings. print <<EOF; The price is $Price. EOF print << "EOF"; # same as above The price is $Price. EOF =item Single Quotes Single quotes indicate the text is to be treated literally with no interpolation of its content. This is similar to single quoted strings except that backslashes have no special meaning, with C<\\> being treated as two backslashes and not one as they would in every other quoting construct. Just as in the shell, a backslashed bareword following the C<<< << >>> means the same thing as a single-quoted string does: $cost = <<'VISTA'; # hasta la ... That'll be $10 please, ma'am. VISTA $cost = <<\VISTA; # Same thing! That'll be $10 please, ma'am. VISTA This is the only form of quoting in perl where there is no need to worry about escaping content, something that code generators can and do make good use of. =item Backticks The content of the here doc is treated just as it would be if the string were embedded in backticks. Thus the content is interpolated as though it were double quoted and then executed via the shell, with the results of the execution returned. print << `EOC`; # execute command and get results echo hi there EOC =back =over 4 =item Indented Here-docs The here-doc modifier C<~> allows you to indent your here-docs to make the code more readable: if ($some_var) { print <<~EOF; This is a here-doc EOF } This will print... This is a here-doc ...with no leading whitespace. The delimiter is used to determine the B<exact> whitespace to remove from the beginning of each line. All lines B<must> have at least the same starting whitespace (except lines only containing a newline) or perl will croak. Tabs and spaces can be mixed, but are matched exactly. One tab will not be equal to 8 spaces! Additional beginning whitespace (beyond what preceded the delimiter) will be preserved: print <<~EOF; This text is not indented This text is indented with two spaces This text is indented with two tabs EOF Finally, the modifier may be used with all of the forms mentioned above: <<~\EOF; <<~'EOF' <<~"EOF" <<~`EOF` And whitespace may be used between the C<~> and quoted delimiters: <<~ 'EOF'; # ... "EOF", `EOF` =back It is possible to stack multiple here-docs in a row: print <<"foo", <<"bar"; # you can stack them I said foo. foo I said bar. bar myfunc(<< "THIS", 23, <<'THAT'); Here's a line or two. THIS and here's another. THAT Just don't forget that you have to put a semicolon on the end to finish the statement, as Perl doesn't know you're not going to try to do this: print <<ABC 179231 ABC + 20; If you want to remove the line terminator from your here-docs, use C<chomp()>. chomp($string = <<'END'); This is a string. END If you want your here-docs to be indented with the rest of the code, use the C<<< <<~FOO >>> construct described under L</Indented Here-docs>: $quote = <<~'FINIS'; The Road goes ever on and on, down from the door where it began. FINIS If you use a here-doc within a delimited construct, such as in C<s///eg>, the quoted material must still come on the line following the C<<< <<FOO >>> marker, which means it may be inside the delimited construct: s/this/<<E . 'that' the other E . 'more '/eg; It works this way as of Perl 5.18. Historically, it was inconsistent, and you would have to write s/this/<<E . 'that' . 'more '/eg; the other E outside of string evals. Additionally, quoting rules for the end-of-string identifier are unrelated to Perl's quoting rules. C<q()>, C<qq()>, and the like are not supported in place of C<''> and C<"">, and the only interpolation is for backslashing the quoting character: print << "abc\"def"; testing... abc"def Finally, quoted strings cannot span multiple lines. The general rule is that the identifier must be a string literal. Stick with that, and you should be safe. =back =head2 Gory details of parsing quoted constructs X<quote, gory details> When presented with something that might have several different interpretations, Perl uses the B<DWIM> (that's "Do What I Mean") principle to pick the most probable interpretation. This strategy is so successful that Perl programmers often do not suspect the ambivalence of what they write. But from time to time, Perl's notions differ substantially from what the author honestly meant. This section hopes to clarify how Perl handles quoted constructs. Although the most common reason to learn this is to unravel labyrinthine regular expressions, because the initial steps of parsing are the same for all quoting operators, they are all discussed together. The most important Perl parsing rule is the first one discussed below: when processing a quoted construct, Perl first finds the end of that construct, then interprets its contents. If you understand this rule, you may skip the rest of this section on the first reading. The other rules are likely to contradict the user's expectations much less frequently than this first one. Some passes discussed below are performed concurrently, but because their results are the same, we consider them individually. For different quoting constructs, Perl performs different numbers of passes, from one to four, but these passes are always performed in the same order. =over 4 =item Finding the end The first pass is finding the end of the quoted construct. This results in saving to a safe location a copy of the text (between the starting and ending delimiters), normalized as necessary to avoid needing to know what the original delimiters were. If the construct is a here-doc, the ending delimiter is a line that has a terminating string as the content. Therefore C<<<EOF> is terminated by C<EOF> immediately followed by C<"\n"> and starting from the first column of the terminating line. When searching for the terminating line of a here-doc, nothing is skipped. In other words, lines after the here-doc syntax are compared with the terminating string line by line. For the constructs except here-docs, single characters are used as starting and ending delimiters. If the starting delimiter is an opening punctuation (that is C<(>, C<[>, C<{>, or C<< < >>), the ending delimiter is the corresponding closing punctuation (that is C<)>, C<]>, C<}>, or C<< > >>). If the starting delimiter is an unpaired character like C</> or a closing punctuation, the ending delimiter is the same as the starting delimiter. Therefore a C</> terminates a C<qq//> construct, while a C<]> terminates both C<qq[]> and C<qq]]> constructs. When searching for single-character delimiters, escaped delimiters and C<\\> are skipped. For example, while searching for terminating C</>, combinations of C<\\> and C<\/> are skipped. If the delimiters are bracketing, nested pairs are also skipped. For example, while searching for a closing C<]> paired with the opening C<[>, combinations of C<\\>, C<\]>, and C<\[> are all skipped, and nested C<[> and C<]> are skipped as well. However, when backslashes are used as the delimiters (like C<qq\\> and C<tr\\\>), nothing is skipped. During the search for the end, backslashes that escape delimiters or other backslashes are removed (exactly speaking, they are not copied to the safe location). For constructs with three-part delimiters (C<s///>, C<y///>, and C<tr///>), the search is repeated once more. If the first delimiter is not an opening punctuation, the three delimiters must be the same, such as C<s!!!> and C<tr)))>, in which case the second delimiter terminates the left part and starts the right part at once. If the left part is delimited by bracketing punctuation (that is C<()>, C<[]>, C<{}>, or C<< <> >>), the right part needs another pair of delimiters such as C<s(){}> and C<tr[]//>. In these cases, whitespace and comments are allowed between the two parts, although the comment must follow at least one whitespace character; otherwise a character expected as the start of the comment may be regarded as the starting delimiter of the right part. During this search no attention is paid to the semantics of the construct. Thus: "$hash{"$foo/$bar"}" or: m/ bar # NOT a comment, this slash / terminated m//! /x do not form legal quoted expressions. The quoted part ends on the first C<"> and C</>, and the rest happens to be a syntax error. Because the slash that terminated C<m//> was followed by a C<SPACE>, the example above is not C<m//x>, but rather C<m//> with no C</x> modifier. So the embedded C<#> is interpreted as a literal C<#>. Also no attention is paid to C<\c\> (multichar control char syntax) during this search. Thus the second C<\> in C<qq/\c\/> is interpreted as a part of C<\/>, and the following C</> is not recognized as a delimiter. Instead, use C<\034> or C<\x1c> at the end of quoted constructs. =item Interpolation X<interpolation> The next step is interpolation in the text obtained, which is now delimiter-independent. There are multiple cases. =over 4 =item C<<<'EOF'> No interpolation is performed. Note that the combination C<\\> is left intact, since escaped delimiters are not available for here-docs. =item C<m''>, the pattern of C<s'''> No interpolation is performed at this stage. Any backslashed sequences including C<\\> are treated at the stage to L</"parsing regular expressions">. =item C<''>, C<q//>, C<tr'''>, C<y'''>, the replacement of C<s'''> The only interpolation is removal of C<\> from pairs of C<\\>. Therefore C<"-"> in C<tr'''> and C<y'''> is treated literally as a hyphen and no character range is available. C<\1> in the replacement of C<s'''> does not work as C<$1>. =item C<tr///>, C<y///> No variable interpolation occurs. String modifying combinations for case and quoting such as C<\Q>, C<\U>, and C<\E> are not recognized. The other escape sequences such as C<\200> and C<\t> and backslashed characters such as C<\\> and C<\-> are converted to appropriate literals. The character C<"-"> is treated specially and therefore C<\-> is treated as a literal C<"-">. =item C<"">, C<``>, C<qq//>, C<qx//>, C<< <file*glob> >>, C<<<"EOF"> C<\Q>, C<\U>, C<\u>, C<\L>, C<\l>, C<\F> (possibly paired with C<\E>) are converted to corresponding Perl constructs. Thus, C<"$foo\Qbaz$bar"> is converted to S<C<$foo . (quotemeta("baz" . $bar))>> internally. The other escape sequences such as C<\200> and C<\t> and backslashed characters such as C<\\> and C<\-> are replaced with appropriate expansions. Let it be stressed that I<whatever falls between C<\Q> and C<\E>> is interpolated in the usual way. Something like C<"\Q\\E"> has no C<\E> inside. Instead, it has C<\Q>, C<\\>, and C<E>, so the result is the same as for C<"\\\\E">. As a general rule, backslashes between C<\Q> and C<\E> may lead to counterintuitive results. So, C<"\Q\t\E"> is converted to C<quotemeta("\t")>, which is the same as C<"\\\t"> (since TAB is not alphanumeric). Note also that: $str = '\t'; return "\Q$str"; may be closer to the conjectural I<intention> of the writer of C<"\Q\t\E">. Interpolated scalars and arrays are converted internally to the C<join> and C<"."> catenation operations. Thus, S<C<"$foo XXX '@arr'">> becomes: $foo . " XXX '" . (join $", @arr) . "'"; All operations above are performed simultaneously, left to right. Because the result of S<C<"\Q I<STRING> \E">> has all metacharacters quoted, there is no way to insert a literal C<$> or C<@> inside a C<\Q\E> pair. If protected by C<\>, C<$> will be quoted to become C<"\\\$">; if not, it is interpreted as the start of an interpolated scalar. Note also that the interpolation code needs to make a decision on where the interpolated scalar ends. For instance, whether S<C<< "a $x -> {c}" >>> really means: "a " . $x . " -> {c}"; or: "a " . $x -> {c}; Most of the time, the longest possible text that does not include spaces between components and which contains matching braces or brackets. because the outcome may be determined by voting based on heuristic estimators, the result is not strictly predictable. Fortunately, it's usually correct for ambiguous cases. =item the replacement of C<s///> Processing of C<\Q>, C<\U>, C<\u>, C<\L>, C<\l>, C<\F> and interpolation happens as with C<qq//> constructs. It is at this step that C<\1> is begrudgingly converted to C<$1> in the replacement text of C<s///>, in order to correct the incorrigible I<sed> hackers who haven't picked up the saner idiom yet. A warning is emitted if the S<C<use warnings>> pragma or the B<-w> command-line flag (that is, the C<$^W> variable) was set. =item C<RE> in C<m?RE?>, C</RE/>, C<m/RE/>, C<s/RE/foo/>, Processing of C<\Q>, C<\U>, C<\u>, C<\L>, C<\l>, C<\F>, C<\E>, and interpolation happens (almost) as with C<qq//> constructs. Processing of C<\N{...}> is also done here, and compiled into an intermediate form for the regex compiler. (This is because, as mentioned below, the regex compilation may be done at execution time, and C<\N{...}> is a compile-time construct.) However any other combinations of C<\> followed by a character are not substituted but only skipped, in order to parse them as regular expressions at the following step. As C<\c> is skipped at this step, C<@> of C<\c@> in RE is possibly treated as an array symbol (for example C<@foo>), even though the same text in C<qq//> gives interpolation of C<\c@>. Code blocks such as C<(?{BLOCK})> are handled by temporarily passing control back to the perl parser, in a similar way that an interpolated array subscript expression such as C<"foo$array[1+f("[xyz")]bar"> would be. Moreover, inside C<(?{BLOCK})>, S<C<(?# comment )>>, and a C<#>-comment in a C</x>-regular expression, no processing is performed whatsoever. This is the first step at which the presence of the C</x> modifier is relevant. Interpolation in patterns has several quirks: C<$|>, C<$(>, C<$)>, C<@+> and C<@-> are not interpolated, and constructs C<$var[SOMETHING]> are voted (by several different estimators) to be either an array element or C<$var> followed by an RE alternative. This is where the notation C<${arr[$bar]}> comes handy: C</${arr[0-9]}/> is interpreted as array element C<-9>, not as a regular expression from the variable C<$arr> followed by a digit, which would be the interpretation of C</$arr[0-9]/>. Since voting among different estimators may occur, the result is not predictable. The lack of processing of C<\\> creates specific restrictions on the post-processed text. If the delimiter is C</>, one cannot get the combination C<\/> into the result of this step. C</> will finish the regular expression, C<\/> will be stripped to C</> on the previous step, and C<\\/> will be left as is. Because C</> is equivalent to C<\/> inside a regular expression, this does not matter unless the delimiter happens to be character special to the RE engine, such as in C<s*foo*bar*>, C<m[foo]>, or C<m?foo?>; or an alphanumeric char, as in: m m ^ a \s* b mmx; In the RE above, which is intentionally obfuscated for illustration, the delimiter is C<m>, the modifier is C<mx>, and after delimiter-removal the RE is the same as for S<C<m/ ^ a \s* b /mx>>. There's more than one reason you're encouraged to restrict your delimiters to non-alphanumeric, non-whitespace choices. =back This step is the last one for all constructs except regular expressions, which are processed further. =item parsing regular expressions X<regexp, parse> Previous steps were performed during the compilation of Perl code, but this one happens at run time, although it may be optimized to be calculated at compile time if appropriate. After preprocessing described above, and possibly after evaluation if concatenation, joining, casing translation, or metaquoting are involved, the resulting I<string> is passed to the RE engine for compilation. Whatever happens in the RE engine might be better discussed in L<perlre>, but for the sake of continuity, we shall do so here. This is another step where the presence of the C</x> modifier is relevant. The RE engine scans the string from left to right and converts it into a finite automaton. Backslashed characters are either replaced with corresponding literal strings (as with C<\{>), or else they generate special nodes in the finite automaton (as with C<\b>). Characters special to the RE engine (such as C<|>) generate corresponding nodes or groups of nodes. C<(?#...)> comments are ignored. All the rest is either converted to literal strings to match, or else is ignored (as is whitespace and C<#>-style comments if C</x> is present). Parsing of the bracketed character class construct, C<[...]>, is rather different than the rule used for the rest of the pattern. The terminator of this construct is found using the same rules as for finding the terminator of a C<{}>-delimited construct, the only exception being that C<]> immediately following C<[> is treated as though preceded by a backslash. The terminator of runtime C<(?{...})> is found by temporarily switching control to the perl parser, which should stop at the point where the logically balancing terminating C<}> is found. It is possible to inspect both the string given to RE engine and the resulting finite automaton. See the arguments C<debug>/C<debugcolor> in the S<C<use L<re>>> pragma, as well as Perl's B<-Dr> command-line switch documented in L<perlrun/"Command Switches">. =item Optimization of regular expressions X<regexp, optimization> This step is listed for completeness only. Since it does not change semantics, details of this step are not documented and are subject to change without notice. This step is performed over the finite automaton that was generated during the previous pass. It is at this stage that C<split()> silently optimizes C</^/> to mean C</^/m>. =back =head2 I/O Operators X<operator, i/o> X<operator, io> X<io> X<while> X<filehandle> X<< <> >> X<< <<>> >> X<@ARGV> There are several I/O operators you should know about. A string enclosed by backticks (grave accents) first undergoes double-quote interpolation. It is then interpreted as an external command, and the output of that command is the value of the backtick string, like in a shell. In scalar context, a single string consisting of all output is returned. In list context, a list of values is returned, one per line of output. (You can set C<$/> to use a different line terminator.) The command is executed each time the pseudo-literal is evaluated. The status value of the command is returned in C<$?> (see L<perlvar> for the interpretation of C<$?>). Unlike in B<csh>, no translation is done on the return data--newlines remain newlines. Unlike in any of the shells, single quotes do not hide variable names in the command from interpretation. To pass a literal dollar-sign through to the shell you need to hide it with a backslash. The generalized form of backticks is C<qx//>, or you can call the L<perlfunc/readpipe> function. (Because backticks always undergo shell expansion as well, see L<perlsec> for security concerns.) X<qx> X<`> X<``> X<backtick> X<glob> In scalar context, evaluating a filehandle in angle brackets yields the next line from that file (the newline, if any, included), or C<undef> at end-of-file or on error. When C<$/> is set to C<undef> (sometimes known as file-slurp mode) and the file is empty, it returns C<''> the first time, followed by C<undef> subsequently. Ordinarily you must assign the returned value to a variable, but there is one situation where an automatic assignment happens. If and only if the input symbol is the only thing inside the conditional of a C<while> statement (even if disguised as a C<for(;;)> loop), the value is automatically assigned to the global variable C<$_>, destroying whatever was there previously. (This may seem like an odd thing to you, but you'll use the construct in almost every Perl script you write.) The C<$_> variable is not implicitly localized. You'll have to put a S<C<local $_;>> before the loop if you want that to happen. Furthermore, if the input symbol or an explicit assignment of the input symbol to a scalar is used as a C<while>/C<for> condition, then the condition actually tests for definedness of the expression's value, not for its regular truth value. Thus the following lines are equivalent: while (defined($_ = <STDIN>)) { print; } while ($_ = <STDIN>) { print; } while (<STDIN>) { print; } for (;<STDIN>;) { print; } print while defined($_ = <STDIN>); print while ($_ = <STDIN>); print while <STDIN>; This also behaves similarly, but assigns to a lexical variable instead of to C<$_>: while (my $line = <STDIN>) { print $line } In these loop constructs, the assigned value (whether assignment is automatic or explicit) is then tested to see whether it is defined. The defined test avoids problems where the line has a string value that would be treated as false by Perl; for example a "" or a C<"0"> with no trailing newline. If you really mean for such values to terminate the loop, they should be tested for explicitly: while (($_ = <STDIN>) ne '0') { ... } while (<STDIN>) { last unless $_; ... } In other boolean contexts, C<< <I<FILEHANDLE>> >> without an explicit C<defined> test or comparison elicits a warning if the S<C<use warnings>> pragma or the B<-w> command-line switch (the C<$^W> variable) is in effect. The filehandles STDIN, STDOUT, and STDERR are predefined. (The filehandles C<stdin>, C<stdout>, and C<stderr> will also work except in packages, where they would be interpreted as local identifiers rather than global.) Additional filehandles may be created with the C<open()> function, amongst others. See L<perlopentut> and L<perlfunc/open> for details on this. X<stdin> X<stdout> X<sterr> If a C<< <I<FILEHANDLE>> >> is used in a context that is looking for a list, a list comprising all input lines is returned, one line per list element. It's easy to grow to a rather large data space this way, so use with care. C<< <I<FILEHANDLE>> >> may also be spelled C<readline(*I<FILEHANDLE>)>. See L<perlfunc/readline>. The null filehandle C<< <> >> is special: it can be used to emulate the behavior of B<sed> and B<awk>, and any other Unix filter program that takes a list of filenames, doing the same to each line of input from all of them. Input from C<< <> >> comes either from standard input, or from each file listed on the command line. Here's how it works: the first time C<< <> >> is evaluated, the C<@ARGV> array is checked, and if it is empty, C<$ARGV[0]> is set to C<"-">, which when opened gives you standard input. The C<@ARGV> array is then processed as a list of filenames. The loop while (<>) { ... # code for each line } is equivalent to the following Perl-like pseudo code: unshift(@ARGV, '-') unless @ARGV; while ($ARGV = shift) { open(ARGV, $ARGV); while (<ARGV>) { ... # code for each line } } except that it isn't so cumbersome to say, and will actually work. It really does shift the C<@ARGV> array and put the current filename into the C<$ARGV> variable. It also uses filehandle I<ARGV> internally. C<< <> >> is just a synonym for C<< <ARGV> >>, which is magical. (The pseudo code above doesn't work because it treats C<< <ARGV> >> as non-magical.) Since the null filehandle uses the two argument form of L<perlfunc/open> it interprets special characters, so if you have a script like this: while (<>) { print; } and call it with S<C<perl dangerous.pl 'rm -rfv *|'>>, it actually opens a pipe, executes the C<rm> command and reads C<rm>'s output from that pipe. If you want all items in C<@ARGV> to be interpreted as file names, you can use the module C<ARGV::readonly> from CPAN, or use the double bracket: while (<<>>) { print; } Using double angle brackets inside of a while causes the open to use the three argument form (with the second argument being C<< < >>), so all arguments in C<ARGV> are treated as literal filenames (including C<"-">). (Note that for convenience, if you use C<< <<>> >> and if C<@ARGV> is empty, it will still read from the standard input.) You can modify C<@ARGV> before the first C<< <> >> as long as the array ends up containing the list of filenames you really want. Line numbers (C<$.>) continue as though the input were one big happy file. See the example in L<perlfunc/eof> for how to reset line numbers on each file. If you want to set C<@ARGV> to your own list of files, go right ahead. This sets C<@ARGV> to all plain text files if no C<@ARGV> was given: @ARGV = grep { -f && -T } glob('*') unless @ARGV; You can even set them to pipe commands. For example, this automatically filters compressed arguments through B<gzip>: @ARGV = map { /\.(gz|Z)$/ ? "gzip -dc < $_ |" : $_ } @ARGV; If you want to pass switches into your script, you can use one of the C<Getopts> modules or put a loop on the front like this: while ($_ = $ARGV[0], /^-/) { shift; last if /^--$/; if (/^-D(.*)/) { $debug = $1 } if (/^-v/) { $verbose++ } # ... # other switches } while (<>) { # ... # code for each line } The C<< <> >> symbol will return C<undef> for end-of-file only once. If you call it again after this, it will assume you are processing another C<@ARGV> list, and if you haven't set C<@ARGV>, will read input from STDIN. If what the angle brackets contain is a simple scalar variable (for example, C<$foo>), then that variable contains the name of the filehandle to input from, or its typeglob, or a reference to the same. For example: $fh = \*STDIN; $line = <$fh>; If what's within the angle brackets is neither a filehandle nor a simple scalar variable containing a filehandle name, typeglob, or typeglob reference, it is interpreted as a filename pattern to be globbed, and either a list of filenames or the next filename in the list is returned, depending on context. This distinction is determined on syntactic grounds alone. That means C<< <$x> >> is always a C<readline()> from an indirect handle, but C<< <$hash{key}> >> is always a C<glob()>. That's because C<$x> is a simple scalar variable, but C<$hash{key}> is not--it's a hash element. Even C<< <$x > >> (note the extra space) is treated as C<glob("$x ")>, not C<readline($x)>. One level of double-quote interpretation is done first, but you can't say C<< <$foo> >> because that's an indirect filehandle as explained in the previous paragraph. (In older versions of Perl, programmers would insert curly brackets to force interpretation as a filename glob: C<< <${foo}> >>. These days, it's considered cleaner to call the internal function directly as C<glob($foo)>, which is probably the right way to have done it in the first place.) For example: while (<*.c>) { chmod 0644, $_; } is roughly equivalent to: open(FOO, "echo *.c | tr -s ' \t\r\f' '\\012\\012\\012\\012'|"); while (<FOO>) { chomp; chmod 0644, $_; } except that the globbing is actually done internally using the standard C<L<File::Glob>> extension. Of course, the shortest way to do the above is: chmod 0644, <*.c>; A (file)glob evaluates its (embedded) argument only when it is starting a new list. All values must be read before it will start over. In list context, this isn't important because you automatically get them all anyway. However, in scalar context the operator returns the next value each time it's called, or C<undef> when the list has run out. As with filehandle reads, an automatic C<defined> is generated when the glob occurs in the test part of a C<while>, because legal glob returns (for example, a file called F<0>) would otherwise terminate the loop. Again, C<undef> is returned only once. So if you're expecting a single value from a glob, it is much better to say ($file) = <blurch*>; than $file = <blurch*>; because the latter will alternate between returning a filename and returning false. If you're trying to do variable interpolation, it's definitely better to use the C<glob()> function, because the older notation can cause people to become confused with the indirect filehandle notation. @files = glob("$dir/*.[ch]"); @files = glob($files[$i]); If an angle-bracket-based globbing expression is used as the condition of a C<while> or C<for> loop, then it will be implicitly assigned to C<$_>. If either a globbing expression or an explicit assignment of a globbing expression to a scalar is used as a C<while>/C<for> condition, then the condition actually tests for definedness of the expression's value, not for its regular truth value. =head2 Constant Folding X<constant folding> X<folding> Like C, Perl does a certain amount of expression evaluation at compile time whenever it determines that all arguments to an operator are static and have no side effects. In particular, string concatenation happens at compile time between literals that don't do variable substitution. Backslash interpolation also happens at compile time. You can say 'Now is the time for all' . "\n" . 'good men to come to.' and this all reduces to one string internally. Likewise, if you say foreach $file (@filenames) { if (-s $file > 5 + 100 * 2**16) { } } the compiler precomputes the number which that expression represents so that the interpreter won't have to. =head2 No-ops X<no-op> X<nop> Perl doesn't officially have a no-op operator, but the bare constants C<0> and C<1> are special-cased not to produce a warning in void context, so you can for example safely do 1 while foo(); =head2 Bitwise String Operators X<operator, bitwise, string> X<&.> X<|.> X<^.> X<~.> Bitstrings of any size may be manipulated by the bitwise operators (C<~ | & ^>). If the operands to a binary bitwise op are strings of different sizes, B<|> and B<^> ops act as though the shorter operand had additional zero bits on the right, while the B<&> op acts as though the longer operand were truncated to the length of the shorter. The granularity for such extension or truncation is one or more bytes. # ASCII-based examples print "j p \n" ^ " a h"; # prints "JAPH\n" print "JA" | " ph\n"; # prints "japh\n" print "japh\nJunk" & '_____'; # prints "JAPH\n"; print 'p N$' ^ " E<H\n"; # prints "Perl\n"; If you are intending to manipulate bitstrings, be certain that you're supplying bitstrings: If an operand is a number, that will imply a B<numeric> bitwise operation. You may explicitly show which type of operation you intend by using C<""> or C<0+>, as in the examples below. $foo = 150 | 105; # yields 255 (0x96 | 0x69 is 0xFF) $foo = '150' | 105; # yields 255 $foo = 150 | '105'; # yields 255 $foo = '150' | '105'; # yields string '155' (under ASCII) $baz = 0+$foo & 0+$bar; # both ops explicitly numeric $biz = "$foo" ^ "$bar"; # both ops explicitly stringy This somewhat unpredictable behavior can be avoided with the "bitwise" feature, new in Perl 5.22. You can enable it via S<C<use feature 'bitwise'>> or C<use v5.28>. Before Perl 5.28, it used to emit a warning in the C<"experimental::bitwise"> category. Under this feature, the four standard bitwise operators (C<~ | & ^>) are always numeric. Adding a dot after each operator (C<~. |. &. ^.>) forces it to treat its operands as strings: use feature "bitwise"; $foo = 150 | 105; # yields 255 (0x96 | 0x69 is 0xFF) $foo = '150' | 105; # yields 255 $foo = 150 | '105'; # yields 255 $foo = '150' | '105'; # yields 255 $foo = 150 |. 105; # yields string '155' $foo = '150' |. 105; # yields string '155' $foo = 150 |.'105'; # yields string '155' $foo = '150' |.'105'; # yields string '155' $baz = $foo & $bar; # both operands numeric $biz = $foo ^. $bar; # both operands stringy The assignment variants of these operators (C<&= |= ^= &.= |.= ^.=>) behave likewise under the feature. It is a fatal error if an operand contains a character whose ordinal value is above 0xFF, and hence not expressible except in UTF-8. The operation is performed on a non-UTF-8 copy for other operands encoded in UTF-8. See L<perlunicode/Byte and Character Semantics>. See L<perlfunc/vec> for information on how to manipulate individual bits in a bit vector. =head2 Integer Arithmetic X<integer> By default, Perl assumes that it must do most of its arithmetic in floating point. But by saying use integer; you may tell the compiler to use integer operations (see L<integer> for a detailed explanation) from here to the end of the enclosing BLOCK. An inner BLOCK may countermand this by saying no integer; which lasts until the end of that BLOCK. Note that this doesn't mean everything is an integer, merely that Perl will use integer operations for arithmetic, comparison, and bitwise operators. For example, even under S<C<use integer>>, if you take the C<sqrt(2)>, you'll still get C<1.4142135623731> or so. Used on numbers, the bitwise operators (C<&> C<|> C<^> C<~> C<< << >> C<< >> >>) always produce integral results. (But see also L</Bitwise String Operators>.) However, S<C<use integer>> still has meaning for them. By default, their results are interpreted as unsigned integers, but if S<C<use integer>> is in effect, their results are interpreted as signed integers. For example, C<~0> usually evaluates to a large integral value. However, S<C<use integer; ~0>> is C<-1> on two's-complement machines. =head2 Floating-point Arithmetic X<floating-point> X<floating point> X<float> X<real> While S<C<use integer>> provides integer-only arithmetic, there is no analogous mechanism to provide automatic rounding or truncation to a certain number of decimal places. For rounding to a certain number of digits, C<sprintf()> or C<printf()> is usually the easiest route. See L<perlfaq4>. Floating-point numbers are only approximations to what a mathematician would call real numbers. There are infinitely more reals than floats, so some corners must be cut. For example: printf "%.20g\n", 123456789123456789; # produces 123456789123456784 Testing for exact floating-point equality or inequality is not a good idea. Here's a (relatively expensive) work-around to compare whether two floating-point numbers are equal to a particular number of decimal places. See Knuth, volume II, for a more robust treatment of this topic. sub fp_equal { my ($X, $Y, $POINTS) = @_; my ($tX, $tY); $tX = sprintf("%.${POINTS}g", $X); $tY = sprintf("%.${POINTS}g", $Y); return $tX eq $tY; } The POSIX module (part of the standard perl distribution) implements C<ceil()>, C<floor()>, and other mathematical and trigonometric functions. The C<L<Math::Complex>> module (part of the standard perl distribution) defines mathematical functions that work on both the reals and the imaginary numbers. C<Math::Complex> is not as efficient as POSIX, but POSIX can't work with complex numbers. Rounding in financial applications can have serious implications, and the rounding method used should be specified precisely. In these cases, it probably pays not to trust whichever system rounding is being used by Perl, but to instead implement the rounding function you need yourself. =head2 Bigger Numbers X<number, arbitrary precision> The standard C<L<Math::BigInt>>, C<L<Math::BigRat>>, and C<L<Math::BigFloat>> modules, along with the C<bignum>, C<bigint>, and C<bigrat> pragmas, provide variable-precision arithmetic and overloaded operators, although they're currently pretty slow. At the cost of some space and considerable speed, they avoid the normal pitfalls associated with limited-precision representations. use 5.010; use bigint; # easy interface to Math::BigInt $x = 123456789123456789; say $x * $x; +15241578780673678515622620750190521 Or with rationals: use 5.010; use bigrat; $x = 3/22; $y = 4/6; say "x/y is ", $x/$y; say "x*y is ", $x*$y; x/y is 9/44 x*y is 1/11 Several modules let you calculate with unlimited or fixed precision (bound only by memory and CPU time). There are also some non-standard modules that provide faster implementations via external C libraries. Here is a short, but incomplete summary: Math::String treat string sequences like numbers Math::FixedPrecision calculate with a fixed precision Math::Currency for currency calculations Bit::Vector manipulate bit vectors fast (uses C) Math::BigIntFast Bit::Vector wrapper for big numbers Math::Pari provides access to the Pari C library Math::Cephes uses the external Cephes C library (no big numbers) Math::Cephes::Fraction fractions via the Cephes library Math::GMP another one using an external C library Math::GMPz an alternative interface to libgmp's big ints Math::GMPq an interface to libgmp's fraction numbers Math::GMPf an interface to libgmp's floating point numbers Choose wisely. =cut perlguts.pod 0000644 00000474467 15125556335 0007155 0 ustar 00 =head1 NAME perlguts - Introduction to the Perl API =head1 DESCRIPTION This document attempts to describe how to use the Perl API, as well as to provide some info on the basic workings of the Perl core. It is far from complete and probably contains many errors. Please refer any questions or comments to the author below. =head1 Variables =head2 Datatypes Perl has three typedefs that handle Perl's three main data types: SV Scalar Value AV Array Value HV Hash Value Each typedef has specific routines that manipulate the various data types. =head2 What is an "IV"? Perl uses a special typedef IV which is a simple signed integer type that is guaranteed to be large enough to hold a pointer (as well as an integer). Additionally, there is the UV, which is simply an unsigned IV. Perl also uses two special typedefs, I32 and I16, which will always be at least 32-bits and 16-bits long, respectively. (Again, there are U32 and U16, as well.) They will usually be exactly 32 and 16 bits long, but on Crays they will both be 64 bits. =head2 Working with SVs An SV can be created and loaded with one command. There are five types of values that can be loaded: an integer value (IV), an unsigned integer value (UV), a double (NV), a string (PV), and another scalar (SV). ("PV" stands for "Pointer Value". You might think that it is misnamed because it is described as pointing only to strings. However, it is possible to have it point to other things. For example, it could point to an array of UVs. But, using it for non-strings requires care, as the underlying assumption of much of the internals is that PVs are just for strings. Often, for example, a trailing C<NUL> is tacked on automatically. The non-string use is documented only in this paragraph.) The seven routines are: SV* newSViv(IV); SV* newSVuv(UV); SV* newSVnv(double); SV* newSVpv(const char*, STRLEN); SV* newSVpvn(const char*, STRLEN); SV* newSVpvf(const char*, ...); SV* newSVsv(SV*); C<STRLEN> is an integer type (C<Size_t>, usually defined as C<size_t> in F<config.h>) guaranteed to be large enough to represent the size of any string that perl can handle. In the unlikely case of a SV requiring more complex initialization, you can create an empty SV with newSV(len). If C<len> is 0 an empty SV of type NULL is returned, else an SV of type PV is returned with len + 1 (for the C<NUL>) bytes of storage allocated, accessible via SvPVX. In both cases the SV has the undef value. SV *sv = newSV(0); /* no storage allocated */ SV *sv = newSV(10); /* 10 (+1) bytes of uninitialised storage * allocated */ To change the value of an I<already-existing> SV, there are eight routines: void sv_setiv(SV*, IV); void sv_setuv(SV*, UV); void sv_setnv(SV*, double); void sv_setpv(SV*, const char*); void sv_setpvn(SV*, const char*, STRLEN) void sv_setpvf(SV*, const char*, ...); void sv_vsetpvfn(SV*, const char*, STRLEN, va_list *, SV **, Size_t, bool *); void sv_setsv(SV*, SV*); Notice that you can choose to specify the length of the string to be assigned by using C<sv_setpvn>, C<newSVpvn>, or C<newSVpv>, or you may allow Perl to calculate the length by using C<sv_setpv> or by specifying 0 as the second argument to C<newSVpv>. Be warned, though, that Perl will determine the string's length by using C<strlen>, which depends on the string terminating with a C<NUL> character, and not otherwise containing NULs. The arguments of C<sv_setpvf> are processed like C<sprintf>, and the formatted output becomes the value. C<sv_vsetpvfn> is an analogue of C<vsprintf>, but it allows you to specify either a pointer to a variable argument list or the address and length of an array of SVs. The last argument points to a boolean; on return, if that boolean is true, then locale-specific information has been used to format the string, and the string's contents are therefore untrustworthy (see L<perlsec>). This pointer may be NULL if that information is not important. Note that this function requires you to specify the length of the format. The C<sv_set*()> functions are not generic enough to operate on values that have "magic". See L</Magic Virtual Tables> later in this document. All SVs that contain strings should be terminated with a C<NUL> character. If it is not C<NUL>-terminated there is a risk of core dumps and corruptions from code which passes the string to C functions or system calls which expect a C<NUL>-terminated string. Perl's own functions typically add a trailing C<NUL> for this reason. Nevertheless, you should be very careful when you pass a string stored in an SV to a C function or system call. To access the actual value that an SV points to, you can use the macros: SvIV(SV*) SvUV(SV*) SvNV(SV*) SvPV(SV*, STRLEN len) SvPV_nolen(SV*) which will automatically coerce the actual scalar type into an IV, UV, double, or string. In the C<SvPV> macro, the length of the string returned is placed into the variable C<len> (this is a macro, so you do I<not> use C<&len>). If you do not care what the length of the data is, use the C<SvPV_nolen> macro. Historically the C<SvPV> macro with the global variable C<PL_na> has been used in this case. But that can be quite inefficient because C<PL_na> must be accessed in thread-local storage in threaded Perl. In any case, remember that Perl allows arbitrary strings of data that may both contain NULs and might not be terminated by a C<NUL>. Also remember that C doesn't allow you to safely say C<foo(SvPV(s, len), len);>. It might work with your compiler, but it won't work for everyone. Break this sort of statement up into separate assignments: SV *s; STRLEN len; char *ptr; ptr = SvPV(s, len); foo(ptr, len); If you want to know if the scalar value is TRUE, you can use: SvTRUE(SV*) Although Perl will automatically grow strings for you, if you need to force Perl to allocate more memory for your SV, you can use the macro SvGROW(SV*, STRLEN newlen) which will determine if more memory needs to be allocated. If so, it will call the function C<sv_grow>. Note that C<SvGROW> can only increase, not decrease, the allocated memory of an SV and that it does not automatically add space for the trailing C<NUL> byte (perl's own string functions typically do C<SvGROW(sv, len + 1)>). If you want to write to an existing SV's buffer and set its value to a string, use SvPV_force() or one of its variants to force the SV to be a PV. This will remove any of various types of non-stringness from the SV while preserving the content of the SV in the PV. This can be used, for example, to append data from an API function to a buffer without extra copying: (void)SvPVbyte_force(sv, len); s = SvGROW(sv, len + needlen + 1); /* something that modifies up to needlen bytes at s+len, but modifies newlen bytes eg. newlen = read(fd, s + len, needlen); ignoring errors for these examples */ s[len + newlen] = '\0'; SvCUR_set(sv, len + newlen); SvUTF8_off(sv); SvSETMAGIC(sv); If you already have the data in memory or if you want to keep your code simple, you can use one of the sv_cat*() variants, such as sv_catpvn(). If you want to insert anywhere in the string you can use sv_insert() or sv_insert_flags(). If you don't need the existing content of the SV, you can avoid some copying with: SvPVCLEAR(sv); s = SvGROW(sv, needlen + 1); /* something that modifies up to needlen bytes at s, but modifies newlen bytes eg. newlen = read(fd, s. needlen); */ s[newlen] = '\0'; SvCUR_set(sv, newlen); SvPOK_only(sv); /* also clears SVf_UTF8 */ SvSETMAGIC(sv); Again, if you already have the data in memory or want to avoid the complexity of the above, you can use sv_setpvn(). If you have a buffer allocated with Newx() and want to set that as the SV's value, you can use sv_usepvn_flags(). That has some requirements if you want to avoid perl re-allocating the buffer to fit the trailing NUL: Newx(buf, somesize+1, char); /* ... fill in buf ... */ buf[somesize] = '\0'; sv_usepvn_flags(sv, buf, somesize, SV_SMAGIC | SV_HAS_TRAILING_NUL); /* buf now belongs to perl, don't release it */ If you have an SV and want to know what kind of data Perl thinks is stored in it, you can use the following macros to check the type of SV you have. SvIOK(SV*) SvNOK(SV*) SvPOK(SV*) You can get and set the current length of the string stored in an SV with the following macros: SvCUR(SV*) SvCUR_set(SV*, I32 val) You can also get a pointer to the end of the string stored in the SV with the macro: SvEND(SV*) But note that these last three macros are valid only if C<SvPOK()> is true. If you want to append something to the end of string stored in an C<SV*>, you can use the following functions: void sv_catpv(SV*, const char*); void sv_catpvn(SV*, const char*, STRLEN); void sv_catpvf(SV*, const char*, ...); void sv_vcatpvfn(SV*, const char*, STRLEN, va_list *, SV **, I32, bool); void sv_catsv(SV*, SV*); The first function calculates the length of the string to be appended by using C<strlen>. In the second, you specify the length of the string yourself. The third function processes its arguments like C<sprintf> and appends the formatted output. The fourth function works like C<vsprintf>. You can specify the address and length of an array of SVs instead of the va_list argument. The fifth function extends the string stored in the first SV with the string stored in the second SV. It also forces the second SV to be interpreted as a string. The C<sv_cat*()> functions are not generic enough to operate on values that have "magic". See L</Magic Virtual Tables> later in this document. If you know the name of a scalar variable, you can get a pointer to its SV by using the following: SV* get_sv("package::varname", 0); This returns NULL if the variable does not exist. If you want to know if this variable (or any other SV) is actually C<defined>, you can call: SvOK(SV*) The scalar C<undef> value is stored in an SV instance called C<PL_sv_undef>. Its address can be used whenever an C<SV*> is needed. Make sure that you don't try to compare a random sv with C<&PL_sv_undef>. For example when interfacing Perl code, it'll work correctly for: foo(undef); But won't work when called as: $x = undef; foo($x); So to repeat always use SvOK() to check whether an sv is defined. Also you have to be careful when using C<&PL_sv_undef> as a value in AVs or HVs (see L</AVs, HVs and undefined values>). There are also the two values C<PL_sv_yes> and C<PL_sv_no>, which contain boolean TRUE and FALSE values, respectively. Like C<PL_sv_undef>, their addresses can be used whenever an C<SV*> is needed. Do not be fooled into thinking that C<(SV *) 0> is the same as C<&PL_sv_undef>. Take this code: SV* sv = (SV*) 0; if (I-am-to-return-a-real-value) { sv = sv_2mortal(newSViv(42)); } sv_setsv(ST(0), sv); This code tries to return a new SV (which contains the value 42) if it should return a real value, or undef otherwise. Instead it has returned a NULL pointer which, somewhere down the line, will cause a segmentation violation, bus error, or just weird results. Change the zero to C<&PL_sv_undef> in the first line and all will be well. To free an SV that you've created, call C<SvREFCNT_dec(SV*)>. Normally this call is not necessary (see L</Reference Counts and Mortality>). =head2 Offsets Perl provides the function C<sv_chop> to efficiently remove characters from the beginning of a string; you give it an SV and a pointer to somewhere inside the PV, and it discards everything before the pointer. The efficiency comes by means of a little hack: instead of actually removing the characters, C<sv_chop> sets the flag C<OOK> (offset OK) to signal to other functions that the offset hack is in effect, and it moves the PV pointer (called C<SvPVX>) forward by the number of bytes chopped off, and adjusts C<SvCUR> and C<SvLEN> accordingly. (A portion of the space between the old and new PV pointers is used to store the count of chopped bytes.) Hence, at this point, the start of the buffer that we allocated lives at C<SvPVX(sv) - SvIV(sv)> in memory and the PV pointer is pointing into the middle of this allocated storage. This is best demonstrated by example. Normally copy-on-write will prevent the substitution from operator from using this hack, but if you can craft a string for which copy-on-write is not possible, you can see it in play. In the current implementation, the final byte of a string buffer is used as a copy-on-write reference count. If the buffer is not big enough, then copy-on-write is skipped. First have a look at an empty string: % ./perl -Ilib -MDevel::Peek -le '$a=""; $a .= ""; Dump $a' SV = PV(0x7ffb7c008a70) at 0x7ffb7c030390 REFCNT = 1 FLAGS = (POK,pPOK) PV = 0x7ffb7bc05b50 ""\0 CUR = 0 LEN = 10 Notice here the LEN is 10. (It may differ on your platform.) Extend the length of the string to one less than 10, and do a substitution: % ./perl -Ilib -MDevel::Peek -le '$a=""; $a.="123456789"; $a=~s/.//; \ Dump($a)' SV = PV(0x7ffa04008a70) at 0x7ffa04030390 REFCNT = 1 FLAGS = (POK,OOK,pPOK) OFFSET = 1 PV = 0x7ffa03c05b61 ( "\1" . ) "23456789"\0 CUR = 8 LEN = 9 Here the number of bytes chopped off (1) is shown next as the OFFSET. The portion of the string between the "real" and the "fake" beginnings is shown in parentheses, and the values of C<SvCUR> and C<SvLEN> reflect the fake beginning, not the real one. (The first character of the string buffer happens to have changed to "\1" here, not "1", because the current implementation stores the offset count in the string buffer. This is subject to change.) Something similar to the offset hack is performed on AVs to enable efficient shifting and splicing off the beginning of the array; while C<AvARRAY> points to the first element in the array that is visible from Perl, C<AvALLOC> points to the real start of the C array. These are usually the same, but a C<shift> operation can be carried out by increasing C<AvARRAY> by one and decreasing C<AvFILL> and C<AvMAX>. Again, the location of the real start of the C array only comes into play when freeing the array. See C<av_shift> in F<av.c>. =head2 What's Really Stored in an SV? Recall that the usual method of determining the type of scalar you have is to use C<Sv*OK> macros. Because a scalar can be both a number and a string, usually these macros will always return TRUE and calling the C<Sv*V> macros will do the appropriate conversion of string to integer/double or integer/double to string. If you I<really> need to know if you have an integer, double, or string pointer in an SV, you can use the following three macros instead: SvIOKp(SV*) SvNOKp(SV*) SvPOKp(SV*) These will tell you if you truly have an integer, double, or string pointer stored in your SV. The "p" stands for private. There are various ways in which the private and public flags may differ. For example, in perl 5.16 and earlier a tied SV may have a valid underlying value in the IV slot (so SvIOKp is true), but the data should be accessed via the FETCH routine rather than directly, so SvIOK is false. (In perl 5.18 onwards, tied scalars use the flags the same way as untied scalars.) Another is when numeric conversion has occurred and precision has been lost: only the private flag is set on 'lossy' values. So when an NV is converted to an IV with loss, SvIOKp, SvNOKp and SvNOK will be set, while SvIOK wont be. In general, though, it's best to use the C<Sv*V> macros. =head2 Working with AVs There are two ways to create and load an AV. The first method creates an empty AV: AV* newAV(); The second method both creates the AV and initially populates it with SVs: AV* av_make(SSize_t num, SV **ptr); The second argument points to an array containing C<num> C<SV*>'s. Once the AV has been created, the SVs can be destroyed, if so desired. Once the AV has been created, the following operations are possible on it: void av_push(AV*, SV*); SV* av_pop(AV*); SV* av_shift(AV*); void av_unshift(AV*, SSize_t num); These should be familiar operations, with the exception of C<av_unshift>. This routine adds C<num> elements at the front of the array with the C<undef> value. You must then use C<av_store> (described below) to assign values to these new elements. Here are some other functions: SSize_t av_top_index(AV*); SV** av_fetch(AV*, SSize_t key, I32 lval); SV** av_store(AV*, SSize_t key, SV* val); The C<av_top_index> function returns the highest index value in an array (just like $#array in Perl). If the array is empty, -1 is returned. The C<av_fetch> function returns the value at index C<key>, but if C<lval> is non-zero, then C<av_fetch> will store an undef value at that index. The C<av_store> function stores the value C<val> at index C<key>, and does not increment the reference count of C<val>. Thus the caller is responsible for taking care of that, and if C<av_store> returns NULL, the caller will have to decrement the reference count to avoid a memory leak. Note that C<av_fetch> and C<av_store> both return C<SV**>'s, not C<SV*>'s as their return value. A few more: void av_clear(AV*); void av_undef(AV*); void av_extend(AV*, SSize_t key); The C<av_clear> function deletes all the elements in the AV* array, but does not actually delete the array itself. The C<av_undef> function will delete all the elements in the array plus the array itself. The C<av_extend> function extends the array so that it contains at least C<key+1> elements. If C<key+1> is less than the currently allocated length of the array, then nothing is done. If you know the name of an array variable, you can get a pointer to its AV by using the following: AV* get_av("package::varname", 0); This returns NULL if the variable does not exist. See L</Understanding the Magic of Tied Hashes and Arrays> for more information on how to use the array access functions on tied arrays. =head2 Working with HVs To create an HV, you use the following routine: HV* newHV(); Once the HV has been created, the following operations are possible on it: SV** hv_store(HV*, const char* key, U32 klen, SV* val, U32 hash); SV** hv_fetch(HV*, const char* key, U32 klen, I32 lval); The C<klen> parameter is the length of the key being passed in (Note that you cannot pass 0 in as a value of C<klen> to tell Perl to measure the length of the key). The C<val> argument contains the SV pointer to the scalar being stored, and C<hash> is the precomputed hash value (zero if you want C<hv_store> to calculate it for you). The C<lval> parameter indicates whether this fetch is actually a part of a store operation, in which case a new undefined value will be added to the HV with the supplied key and C<hv_fetch> will return as if the value had already existed. Remember that C<hv_store> and C<hv_fetch> return C<SV**>'s and not just C<SV*>. To access the scalar value, you must first dereference the return value. However, you should check to make sure that the return value is not NULL before dereferencing it. The first of these two functions checks if a hash table entry exists, and the second deletes it. bool hv_exists(HV*, const char* key, U32 klen); SV* hv_delete(HV*, const char* key, U32 klen, I32 flags); If C<flags> does not include the C<G_DISCARD> flag then C<hv_delete> will create and return a mortal copy of the deleted value. And more miscellaneous functions: void hv_clear(HV*); void hv_undef(HV*); Like their AV counterparts, C<hv_clear> deletes all the entries in the hash table but does not actually delete the hash table. The C<hv_undef> deletes both the entries and the hash table itself. Perl keeps the actual data in a linked list of structures with a typedef of HE. These contain the actual key and value pointers (plus extra administrative overhead). The key is a string pointer; the value is an C<SV*>. However, once you have an C<HE*>, to get the actual key and value, use the routines specified below. I32 hv_iterinit(HV*); /* Prepares starting point to traverse hash table */ HE* hv_iternext(HV*); /* Get the next entry, and return a pointer to a structure that has both the key and value */ char* hv_iterkey(HE* entry, I32* retlen); /* Get the key from an HE structure and also return the length of the key string */ SV* hv_iterval(HV*, HE* entry); /* Return an SV pointer to the value of the HE structure */ SV* hv_iternextsv(HV*, char** key, I32* retlen); /* This convenience routine combines hv_iternext, hv_iterkey, and hv_iterval. The key and retlen arguments are return values for the key and its length. The value is returned in the SV* argument */ If you know the name of a hash variable, you can get a pointer to its HV by using the following: HV* get_hv("package::varname", 0); This returns NULL if the variable does not exist. The hash algorithm is defined in the C<PERL_HASH> macro: PERL_HASH(hash, key, klen) The exact implementation of this macro varies by architecture and version of perl, and the return value may change per invocation, so the value is only valid for the duration of a single perl process. See L</Understanding the Magic of Tied Hashes and Arrays> for more information on how to use the hash access functions on tied hashes. =for apidoc Amh|void|PERL_HASH|U32 hash|char *key|STRLEN klen =head2 Hash API Extensions Beginning with version 5.004, the following functions are also supported: HE* hv_fetch_ent (HV* tb, SV* key, I32 lval, U32 hash); HE* hv_store_ent (HV* tb, SV* key, SV* val, U32 hash); bool hv_exists_ent (HV* tb, SV* key, U32 hash); SV* hv_delete_ent (HV* tb, SV* key, I32 flags, U32 hash); SV* hv_iterkeysv (HE* entry); Note that these functions take C<SV*> keys, which simplifies writing of extension code that deals with hash structures. These functions also allow passing of C<SV*> keys to C<tie> functions without forcing you to stringify the keys (unlike the previous set of functions). They also return and accept whole hash entries (C<HE*>), making their use more efficient (since the hash number for a particular string doesn't have to be recomputed every time). See L<perlapi> for detailed descriptions. The following macros must always be used to access the contents of hash entries. Note that the arguments to these macros must be simple variables, since they may get evaluated more than once. See L<perlapi> for detailed descriptions of these macros. HePV(HE* he, STRLEN len) HeVAL(HE* he) HeHASH(HE* he) HeSVKEY(HE* he) HeSVKEY_force(HE* he) HeSVKEY_set(HE* he, SV* sv) These two lower level macros are defined, but must only be used when dealing with keys that are not C<SV*>s: HeKEY(HE* he) HeKLEN(HE* he) Note that both C<hv_store> and C<hv_store_ent> do not increment the reference count of the stored C<val>, which is the caller's responsibility. If these functions return a NULL value, the caller will usually have to decrement the reference count of C<val> to avoid a memory leak. =head2 AVs, HVs and undefined values Sometimes you have to store undefined values in AVs or HVs. Although this may be a rare case, it can be tricky. That's because you're used to using C<&PL_sv_undef> if you need an undefined SV. For example, intuition tells you that this XS code: AV *av = newAV(); av_store( av, 0, &PL_sv_undef ); is equivalent to this Perl code: my @av; $av[0] = undef; Unfortunately, this isn't true. In perl 5.18 and earlier, AVs use C<&PL_sv_undef> as a marker for indicating that an array element has not yet been initialized. Thus, C<exists $av[0]> would be true for the above Perl code, but false for the array generated by the XS code. In perl 5.20, storing &PL_sv_undef will create a read-only element, because the scalar &PL_sv_undef itself is stored, not a copy. Similar problems can occur when storing C<&PL_sv_undef> in HVs: hv_store( hv, "key", 3, &PL_sv_undef, 0 ); This will indeed make the value C<undef>, but if you try to modify the value of C<key>, you'll get the following error: Modification of non-creatable hash value attempted In perl 5.8.0, C<&PL_sv_undef> was also used to mark placeholders in restricted hashes. This caused such hash entries not to appear when iterating over the hash or when checking for the keys with the C<hv_exists> function. You can run into similar problems when you store C<&PL_sv_yes> or C<&PL_sv_no> into AVs or HVs. Trying to modify such elements will give you the following error: Modification of a read-only value attempted To make a long story short, you can use the special variables C<&PL_sv_undef>, C<&PL_sv_yes> and C<&PL_sv_no> with AVs and HVs, but you have to make sure you know what you're doing. Generally, if you want to store an undefined value in an AV or HV, you should not use C<&PL_sv_undef>, but rather create a new undefined value using the C<newSV> function, for example: av_store( av, 42, newSV(0) ); hv_store( hv, "foo", 3, newSV(0), 0 ); =head2 References References are a special type of scalar that point to other data types (including other references). To create a reference, use either of the following functions: SV* newRV_inc((SV*) thing); SV* newRV_noinc((SV*) thing); The C<thing> argument can be any of an C<SV*>, C<AV*>, or C<HV*>. The functions are identical except that C<newRV_inc> increments the reference count of the C<thing>, while C<newRV_noinc> does not. For historical reasons, C<newRV> is a synonym for C<newRV_inc>. Once you have a reference, you can use the following macro to dereference the reference: SvRV(SV*) then call the appropriate routines, casting the returned C<SV*> to either an C<AV*> or C<HV*>, if required. To determine if an SV is a reference, you can use the following macro: SvROK(SV*) To discover what type of value the reference refers to, use the following macro and then check the return value. SvTYPE(SvRV(SV*)) The most useful types that will be returned are: SVt_PVAV Array SVt_PVHV Hash SVt_PVCV Code SVt_PVGV Glob (possibly a file handle) Any numerical value returned which is less than SVt_PVAV will be a scalar of some form. See L<perlapi/svtype> for more details. =head2 Blessed References and Class Objects References are also used to support object-oriented programming. In perl's OO lexicon, an object is simply a reference that has been blessed into a package (or class). Once blessed, the programmer may now use the reference to access the various methods in the class. A reference can be blessed into a package with the following function: SV* sv_bless(SV* sv, HV* stash); The C<sv> argument must be a reference value. The C<stash> argument specifies which class the reference will belong to. See L</Stashes and Globs> for information on converting class names into stashes. /* Still under construction */ The following function upgrades rv to reference if not already one. Creates a new SV for rv to point to. If C<classname> is non-null, the SV is blessed into the specified class. SV is returned. SV* newSVrv(SV* rv, const char* classname); The following three functions copy integer, unsigned integer or double into an SV whose reference is C<rv>. SV is blessed if C<classname> is non-null. SV* sv_setref_iv(SV* rv, const char* classname, IV iv); SV* sv_setref_uv(SV* rv, const char* classname, UV uv); SV* sv_setref_nv(SV* rv, const char* classname, NV iv); The following function copies the pointer value (I<the address, not the string!>) into an SV whose reference is rv. SV is blessed if C<classname> is non-null. SV* sv_setref_pv(SV* rv, const char* classname, void* pv); The following function copies a string into an SV whose reference is C<rv>. Set length to 0 to let Perl calculate the string length. SV is blessed if C<classname> is non-null. SV* sv_setref_pvn(SV* rv, const char* classname, char* pv, STRLEN length); The following function tests whether the SV is blessed into the specified class. It does not check inheritance relationships. int sv_isa(SV* sv, const char* name); The following function tests whether the SV is a reference to a blessed object. int sv_isobject(SV* sv); The following function tests whether the SV is derived from the specified class. SV can be either a reference to a blessed object or a string containing a class name. This is the function implementing the C<UNIVERSAL::isa> functionality. bool sv_derived_from(SV* sv, const char* name); To check if you've got an object derived from a specific class you have to write: if (sv_isobject(sv) && sv_derived_from(sv, class)) { ... } =head2 Creating New Variables To create a new Perl variable with an undef value which can be accessed from your Perl script, use the following routines, depending on the variable type. SV* get_sv("package::varname", GV_ADD); AV* get_av("package::varname", GV_ADD); HV* get_hv("package::varname", GV_ADD); Notice the use of GV_ADD as the second parameter. The new variable can now be set, using the routines appropriate to the data type. There are additional macros whose values may be bitwise OR'ed with the C<GV_ADD> argument to enable certain extra features. Those bits are: =over =item GV_ADDMULTI Marks the variable as multiply defined, thus preventing the: Name <varname> used only once: possible typo warning. =item GV_ADDWARN Issues the warning: Had to create <varname> unexpectedly if the variable did not exist before the function was called. =back If you do not specify a package name, the variable is created in the current package. =head2 Reference Counts and Mortality Perl uses a reference count-driven garbage collection mechanism. SVs, AVs, or HVs (xV for short in the following) start their life with a reference count of 1. If the reference count of an xV ever drops to 0, then it will be destroyed and its memory made available for reuse. At the most basic internal level, reference counts can be manipulated with the following macros: int SvREFCNT(SV* sv); SV* SvREFCNT_inc(SV* sv); void SvREFCNT_dec(SV* sv); (There are also suffixed versions of the increment and decrement macros, for situations where the full generality of these basic macros can be exchanged for some performance.) However, the way a programmer should think about references is not so much in terms of the bare reference count, but in terms of I<ownership> of references. A reference to an xV can be owned by any of a variety of entities: another xV, the Perl interpreter, an XS data structure, a piece of running code, or a dynamic scope. An xV generally does not know what entities own the references to it; it only knows how many references there are, which is the reference count. To correctly maintain reference counts, it is essential to keep track of what references the XS code is manipulating. The programmer should always know where a reference has come from and who owns it, and be aware of any creation or destruction of references, and any transfers of ownership. Because ownership isn't represented explicitly in the xV data structures, only the reference count need be actually maintained by the code, and that means that this understanding of ownership is not actually evident in the code. For example, transferring ownership of a reference from one owner to another doesn't change the reference count at all, so may be achieved with no actual code. (The transferring code doesn't touch the referenced object, but does need to ensure that the former owner knows that it no longer owns the reference, and that the new owner knows that it now does.) An xV that is visible at the Perl level should not become unreferenced and thus be destroyed. Normally, an object will only become unreferenced when it is no longer visible, often by the same means that makes it invisible. For example, a Perl reference value (RV) owns a reference to its referent, so if the RV is overwritten that reference gets destroyed, and the no-longer-reachable referent may be destroyed as a result. Many functions have some kind of reference manipulation as part of their purpose. Sometimes this is documented in terms of ownership of references, and sometimes it is (less helpfully) documented in terms of changes to reference counts. For example, the L<newRV_inc()|perlapi/newRV_inc> function is documented to create a new RV (with reference count 1) and increment the reference count of the referent that was supplied by the caller. This is best understood as creating a new reference to the referent, which is owned by the created RV, and returning to the caller ownership of the sole reference to the RV. The L<newRV_noinc()|perlapi/newRV_noinc> function instead does not increment the reference count of the referent, but the RV nevertheless ends up owning a reference to the referent. It is therefore implied that the caller of C<newRV_noinc()> is relinquishing a reference to the referent, making this conceptually a more complicated operation even though it does less to the data structures. For example, imagine you want to return a reference from an XSUB function. Inside the XSUB routine, you create an SV which initially has just a single reference, owned by the XSUB routine. This reference needs to be disposed of before the routine is complete, otherwise it will leak, preventing the SV from ever being destroyed. So to create an RV referencing the SV, it is most convenient to pass the SV to C<newRV_noinc()>, which consumes that reference. Now the XSUB routine no longer owns a reference to the SV, but does own a reference to the RV, which in turn owns a reference to the SV. The ownership of the reference to the RV is then transferred by the process of returning the RV from the XSUB. There are some convenience functions available that can help with the destruction of xVs. These functions introduce the concept of "mortality". Much documentation speaks of an xV itself being mortal, but this is misleading. It is really I<a reference to> an xV that is mortal, and it is possible for there to be more than one mortal reference to a single xV. For a reference to be mortal means that it is owned by the temps stack, one of perl's many internal stacks, which will destroy that reference "a short time later". Usually the "short time later" is the end of the current Perl statement. However, it gets more complicated around dynamic scopes: there can be multiple sets of mortal references hanging around at the same time, with different death dates. Internally, the actual determinant for when mortal xV references are destroyed depends on two macros, SAVETMPS and FREETMPS. See L<perlcall> and L<perlxs> and L</Temporaries Stack> below for more details on these macros. Mortal references are mainly used for xVs that are placed on perl's main stack. The stack is problematic for reference tracking, because it contains a lot of xV references, but doesn't own those references: they are not counted. Currently, there are many bugs resulting from xVs being destroyed while referenced by the stack, because the stack's uncounted references aren't enough to keep the xVs alive. So when putting an (uncounted) reference on the stack, it is vitally important to ensure that there will be a counted reference to the same xV that will last at least as long as the uncounted reference. But it's also important that that counted reference be cleaned up at an appropriate time, and not unduly prolong the xV's life. For there to be a mortal reference is often the best way to satisfy this requirement, especially if the xV was created especially to be put on the stack and would otherwise be unreferenced. To create a mortal reference, use the functions: SV* sv_newmortal() SV* sv_mortalcopy(SV*) SV* sv_2mortal(SV*) C<sv_newmortal()> creates an SV (with the undefined value) whose sole reference is mortal. C<sv_mortalcopy()> creates an xV whose value is a copy of a supplied xV and whose sole reference is mortal. C<sv_2mortal()> mortalises an existing xV reference: it transfers ownership of a reference from the caller to the temps stack. Because C<sv_newmortal> gives the new SV no value, it must normally be given one via C<sv_setpv>, C<sv_setiv>, etc. : SV *tmp = sv_newmortal(); sv_setiv(tmp, an_integer); As that is multiple C statements it is quite common so see this idiom instead: SV *tmp = sv_2mortal(newSViv(an_integer)); The mortal routines are not just for SVs; AVs and HVs can be made mortal by passing their address (type-casted to C<SV*>) to the C<sv_2mortal> or C<sv_mortalcopy> routines. =head2 Stashes and Globs A B<stash> is a hash that contains all variables that are defined within a package. Each key of the stash is a symbol name (shared by all the different types of objects that have the same name), and each value in the hash table is a GV (Glob Value). This GV in turn contains references to the various objects of that name, including (but not limited to) the following: Scalar Value Array Value Hash Value I/O Handle Format Subroutine There is a single stash called C<PL_defstash> that holds the items that exist in the C<main> package. To get at the items in other packages, append the string "::" to the package name. The items in the C<Foo> package are in the stash C<Foo::> in PL_defstash. The items in the C<Bar::Baz> package are in the stash C<Baz::> in C<Bar::>'s stash. To get the stash pointer for a particular package, use the function: HV* gv_stashpv(const char* name, I32 flags) HV* gv_stashsv(SV*, I32 flags) The first function takes a literal string, the second uses the string stored in the SV. Remember that a stash is just a hash table, so you get back an C<HV*>. The C<flags> flag will create a new package if it is set to GV_ADD. The name that C<gv_stash*v> wants is the name of the package whose symbol table you want. The default package is called C<main>. If you have multiply nested packages, pass their names to C<gv_stash*v>, separated by C<::> as in the Perl language itself. Alternately, if you have an SV that is a blessed reference, you can find out the stash pointer by using: HV* SvSTASH(SvRV(SV*)); then use the following to get the package name itself: char* HvNAME(HV* stash); If you need to bless or re-bless an object you can use the following function: SV* sv_bless(SV*, HV* stash) where the first argument, an C<SV*>, must be a reference, and the second argument is a stash. The returned C<SV*> can now be used in the same way as any other SV. For more information on references and blessings, consult L<perlref>. =head2 Double-Typed SVs Scalar variables normally contain only one type of value, an integer, double, pointer, or reference. Perl will automatically convert the actual scalar data from the stored type into the requested type. Some scalar variables contain more than one type of scalar data. For example, the variable C<$!> contains either the numeric value of C<errno> or its string equivalent from either C<strerror> or C<sys_errlist[]>. To force multiple data values into an SV, you must do two things: use the C<sv_set*v> routines to add the additional scalar type, then set a flag so that Perl will believe it contains more than one type of data. The four macros to set the flags are: SvIOK_on SvNOK_on SvPOK_on SvROK_on The particular macro you must use depends on which C<sv_set*v> routine you called first. This is because every C<sv_set*v> routine turns on only the bit for the particular type of data being set, and turns off all the rest. For example, to create a new Perl variable called "dberror" that contains both the numeric and descriptive string error values, you could use the following code: extern int dberror; extern char *dberror_list; SV* sv = get_sv("dberror", GV_ADD); sv_setiv(sv, (IV) dberror); sv_setpv(sv, dberror_list[dberror]); SvIOK_on(sv); If the order of C<sv_setiv> and C<sv_setpv> had been reversed, then the macro C<SvPOK_on> would need to be called instead of C<SvIOK_on>. =head2 Read-Only Values In Perl 5.16 and earlier, copy-on-write (see the next section) shared a flag bit with read-only scalars. So the only way to test whether C<sv_setsv>, etc., will raise a "Modification of a read-only value" error in those versions is: SvREADONLY(sv) && !SvIsCOW(sv) Under Perl 5.18 and later, SvREADONLY only applies to read-only variables, and, under 5.20, copy-on-write scalars can also be read-only, so the above check is incorrect. You just want: SvREADONLY(sv) If you need to do this check often, define your own macro like this: #if PERL_VERSION >= 18 # define SvTRULYREADONLY(sv) SvREADONLY(sv) #else # define SvTRULYREADONLY(sv) (SvREADONLY(sv) && !SvIsCOW(sv)) #endif =head2 Copy on Write Perl implements a copy-on-write (COW) mechanism for scalars, in which string copies are not immediately made when requested, but are deferred until made necessary by one or the other scalar changing. This is mostly transparent, but one must take care not to modify string buffers that are shared by multiple SVs. You can test whether an SV is using copy-on-write with C<SvIsCOW(sv)>. You can force an SV to make its own copy of its string buffer by calling C<sv_force_normal(sv)> or SvPV_force_nolen(sv). If you want to make the SV drop its string buffer, use C<sv_force_normal_flags(sv, SV_COW_DROP_PV)> or simply C<sv_setsv(sv, NULL)>. All of these functions will croak on read-only scalars (see the previous section for more on those). To test that your code is behaving correctly and not modifying COW buffers, on systems that support L<mmap(2)> (i.e., Unix) you can configure perl with C<-Accflags=-DPERL_DEBUG_READONLY_COW> and it will turn buffer violations into crashes. You will find it to be marvellously slow, so you may want to skip perl's own tests. =head2 Magic Variables [This section still under construction. Ignore everything here. Post no bills. Everything not permitted is forbidden.] Any SV may be magical, that is, it has special features that a normal SV does not have. These features are stored in the SV structure in a linked list of C<struct magic>'s, typedef'ed to C<MAGIC>. struct magic { MAGIC* mg_moremagic; MGVTBL* mg_virtual; U16 mg_private; char mg_type; U8 mg_flags; I32 mg_len; SV* mg_obj; char* mg_ptr; }; Note this is current as of patchlevel 0, and could change at any time. =head2 Assigning Magic Perl adds magic to an SV using the sv_magic function: void sv_magic(SV* sv, SV* obj, int how, const char* name, I32 namlen); The C<sv> argument is a pointer to the SV that is to acquire a new magical feature. If C<sv> is not already magical, Perl uses the C<SvUPGRADE> macro to convert C<sv> to type C<SVt_PVMG>. Perl then continues by adding new magic to the beginning of the linked list of magical features. Any prior entry of the same type of magic is deleted. Note that this can be overridden, and multiple instances of the same type of magic can be associated with an SV. The C<name> and C<namlen> arguments are used to associate a string with the magic, typically the name of a variable. C<namlen> is stored in the C<mg_len> field and if C<name> is non-null then either a C<savepvn> copy of C<name> or C<name> itself is stored in the C<mg_ptr> field, depending on whether C<namlen> is greater than zero or equal to zero respectively. As a special case, if C<(name && namlen == HEf_SVKEY)> then C<name> is assumed to contain an C<SV*> and is stored as-is with its REFCNT incremented. The sv_magic function uses C<how> to determine which, if any, predefined "Magic Virtual Table" should be assigned to the C<mg_virtual> field. See the L</Magic Virtual Tables> section below. The C<how> argument is also stored in the C<mg_type> field. The value of C<how> should be chosen from the set of macros C<PERL_MAGIC_foo> found in F<perl.h>. Note that before these macros were added, Perl internals used to directly use character literals, so you may occasionally come across old code or documentation referring to 'U' magic rather than C<PERL_MAGIC_uvar> for example. The C<obj> argument is stored in the C<mg_obj> field of the C<MAGIC> structure. If it is not the same as the C<sv> argument, the reference count of the C<obj> object is incremented. If it is the same, or if the C<how> argument is C<PERL_MAGIC_arylen>, C<PERL_MAGIC_regdatum>, C<PERL_MAGIC_regdata>, or if it is a NULL pointer, then C<obj> is merely stored, without the reference count being incremented. See also C<sv_magicext> in L<perlapi> for a more flexible way to add magic to an SV. There is also a function to add magic to an C<HV>: void hv_magic(HV *hv, GV *gv, int how); This simply calls C<sv_magic> and coerces the C<gv> argument into an C<SV>. To remove the magic from an SV, call the function sv_unmagic: int sv_unmagic(SV *sv, int type); The C<type> argument should be equal to the C<how> value when the C<SV> was initially made magical. However, note that C<sv_unmagic> removes all magic of a certain C<type> from the C<SV>. If you want to remove only certain magic of a C<type> based on the magic virtual table, use C<sv_unmagicext> instead: int sv_unmagicext(SV *sv, int type, MGVTBL *vtbl); =head2 Magic Virtual Tables The C<mg_virtual> field in the C<MAGIC> structure is a pointer to an C<MGVTBL>, which is a structure of function pointers and stands for "Magic Virtual Table" to handle the various operations that might be applied to that variable. The C<MGVTBL> has five (or sometimes eight) pointers to the following routine types: int (*svt_get) (pTHX_ SV* sv, MAGIC* mg); int (*svt_set) (pTHX_ SV* sv, MAGIC* mg); U32 (*svt_len) (pTHX_ SV* sv, MAGIC* mg); int (*svt_clear)(pTHX_ SV* sv, MAGIC* mg); int (*svt_free) (pTHX_ SV* sv, MAGIC* mg); int (*svt_copy) (pTHX_ SV *sv, MAGIC* mg, SV *nsv, const char *name, I32 namlen); int (*svt_dup) (pTHX_ MAGIC *mg, CLONE_PARAMS *param); int (*svt_local)(pTHX_ SV *nsv, MAGIC *mg); This MGVTBL structure is set at compile-time in F<perl.h> and there are currently 32 types. These different structures contain pointers to various routines that perform additional actions depending on which function is being called. Function pointer Action taken ---------------- ------------ svt_get Do something before the value of the SV is retrieved. svt_set Do something after the SV is assigned a value. svt_len Report on the SV's length. svt_clear Clear something the SV represents. svt_free Free any extra storage associated with the SV. svt_copy copy tied variable magic to a tied element svt_dup duplicate a magic structure during thread cloning svt_local copy magic to local value during 'local' For instance, the MGVTBL structure called C<vtbl_sv> (which corresponds to an C<mg_type> of C<PERL_MAGIC_sv>) contains: { magic_get, magic_set, magic_len, 0, 0 } Thus, when an SV is determined to be magical and of type C<PERL_MAGIC_sv>, if a get operation is being performed, the routine C<magic_get> is called. All the various routines for the various magical types begin with C<magic_>. NOTE: the magic routines are not considered part of the Perl API, and may not be exported by the Perl library. The last three slots are a recent addition, and for source code compatibility they are only checked for if one of the three flags MGf_COPY, MGf_DUP or MGf_LOCAL is set in mg_flags. This means that most code can continue declaring a vtable as a 5-element value. These three are currently used exclusively by the threading code, and are highly subject to change. The current kinds of Magic Virtual Tables are: =for comment This table is generated by regen/mg_vtable.pl. Any changes made here will be lost. =for mg_vtable.pl begin mg_type (old-style char and macro) MGVTBL Type of magic -------------------------- ------ ------------- \0 PERL_MAGIC_sv vtbl_sv Special scalar variable # PERL_MAGIC_arylen vtbl_arylen Array length ($#ary) % PERL_MAGIC_rhash (none) Extra data for restricted hashes * PERL_MAGIC_debugvar vtbl_debugvar $DB::single, signal, trace vars . PERL_MAGIC_pos vtbl_pos pos() lvalue : PERL_MAGIC_symtab (none) Extra data for symbol tables < PERL_MAGIC_backref vtbl_backref For weak ref data @ PERL_MAGIC_arylen_p (none) To move arylen out of XPVAV B PERL_MAGIC_bm vtbl_regexp Boyer-Moore (fast string search) c PERL_MAGIC_overload_table vtbl_ovrld Holds overload table (AMT) on stash D PERL_MAGIC_regdata vtbl_regdata Regex match position data (@+ and @- vars) d PERL_MAGIC_regdatum vtbl_regdatum Regex match position data element E PERL_MAGIC_env vtbl_env %ENV hash e PERL_MAGIC_envelem vtbl_envelem %ENV hash element f PERL_MAGIC_fm vtbl_regexp Formline ('compiled' format) g PERL_MAGIC_regex_global vtbl_mglob m//g target H PERL_MAGIC_hints vtbl_hints %^H hash h PERL_MAGIC_hintselem vtbl_hintselem %^H hash element I PERL_MAGIC_isa vtbl_isa @ISA array i PERL_MAGIC_isaelem vtbl_isaelem @ISA array element k PERL_MAGIC_nkeys vtbl_nkeys scalar(keys()) lvalue L PERL_MAGIC_dbfile (none) Debugger %_<filename l PERL_MAGIC_dbline vtbl_dbline Debugger %_<filename element N PERL_MAGIC_shared (none) Shared between threads n PERL_MAGIC_shared_scalar (none) Shared between threads o PERL_MAGIC_collxfrm vtbl_collxfrm Locale transformation P PERL_MAGIC_tied vtbl_pack Tied array or hash p PERL_MAGIC_tiedelem vtbl_packelem Tied array or hash element q PERL_MAGIC_tiedscalar vtbl_packelem Tied scalar or handle r PERL_MAGIC_qr vtbl_regexp Precompiled qr// regex S PERL_MAGIC_sig (none) %SIG hash s PERL_MAGIC_sigelem vtbl_sigelem %SIG hash element t PERL_MAGIC_taint vtbl_taint Taintedness U PERL_MAGIC_uvar vtbl_uvar Available for use by extensions u PERL_MAGIC_uvar_elem (none) Reserved for use by extensions V PERL_MAGIC_vstring (none) SV was vstring literal v PERL_MAGIC_vec vtbl_vec vec() lvalue w PERL_MAGIC_utf8 vtbl_utf8 Cached UTF-8 information x PERL_MAGIC_substr vtbl_substr substr() lvalue Y PERL_MAGIC_nonelem vtbl_nonelem Array element that does not exist y PERL_MAGIC_defelem vtbl_defelem Shadow "foreach" iterator variable / smart parameter vivification \ PERL_MAGIC_lvref vtbl_lvref Lvalue reference constructor ] PERL_MAGIC_checkcall vtbl_checkcall Inlining/mutation of call to this CV ~ PERL_MAGIC_ext (none) Available for use by extensions =for apidoc Amnh||PERL_MAGIC_sv =for apidoc Amnh||PERL_MAGIC_arylen =for apidoc Amnh||PERL_MAGIC_rhash =for apidoc Amnh||PERL_MAGIC_debugvar =for apidoc Amnh||PERL_MAGIC_pos =for apidoc Amnh||PERL_MAGIC_symtab =for apidoc Amnh||PERL_MAGIC_backref =for apidoc Amnh||PERL_MAGIC_arylen_p =for apidoc Amnh||PERL_MAGIC_bm =for apidoc Amnh||PERL_MAGIC_overload_table =for apidoc Amnh||PERL_MAGIC_regdata =for apidoc Amnh||PERL_MAGIC_regdatum =for apidoc Amnh||PERL_MAGIC_env =for apidoc Amnh||PERL_MAGIC_envelem =for apidoc Amnh||PERL_MAGIC_fm =for apidoc Amnh||PERL_MAGIC_regex_global =for apidoc Amnh||PERL_MAGIC_hints =for apidoc Amnh||PERL_MAGIC_hintselem =for apidoc Amnh||PERL_MAGIC_isa =for apidoc Amnh||PERL_MAGIC_isaelem =for apidoc Amnh||PERL_MAGIC_nkeys =for apidoc Amnh||PERL_MAGIC_dbfile =for apidoc Amnh||PERL_MAGIC_dbline =for apidoc Amnh||PERL_MAGIC_shared =for apidoc Amnh||PERL_MAGIC_shared_scalar =for apidoc Amnh||PERL_MAGIC_collxfrm =for apidoc Amnh||PERL_MAGIC_tied =for apidoc Amnh||PERL_MAGIC_tiedelem =for apidoc Amnh||PERL_MAGIC_tiedscalar =for apidoc Amnh||PERL_MAGIC_qr =for apidoc Amnh||PERL_MAGIC_sig =for apidoc Amnh||PERL_MAGIC_sigelem =for apidoc Amnh||PERL_MAGIC_taint =for apidoc Amnh||PERL_MAGIC_uvar =for apidoc Amnh||PERL_MAGIC_uvar_elem =for apidoc Amnh||PERL_MAGIC_vstring =for apidoc Amnh||PERL_MAGIC_vec =for apidoc Amnh||PERL_MAGIC_utf8 =for apidoc Amnh||PERL_MAGIC_substr =for apidoc Amnh||PERL_MAGIC_nonelem =for apidoc Amnh||PERL_MAGIC_defelem =for apidoc Amnh||PERL_MAGIC_lvref =for apidoc Amnh||PERL_MAGIC_checkcall =for apidoc Amnh||PERL_MAGIC_ext =for mg_vtable.pl end When an uppercase and lowercase letter both exist in the table, then the uppercase letter is typically used to represent some kind of composite type (a list or a hash), and the lowercase letter is used to represent an element of that composite type. Some internals code makes use of this case relationship. However, 'v' and 'V' (vec and v-string) are in no way related. The C<PERL_MAGIC_ext> and C<PERL_MAGIC_uvar> magic types are defined specifically for use by extensions and will not be used by perl itself. Extensions can use C<PERL_MAGIC_ext> magic to 'attach' private information to variables (typically objects). This is especially useful because there is no way for normal perl code to corrupt this private information (unlike using extra elements of a hash object). Similarly, C<PERL_MAGIC_uvar> magic can be used much like tie() to call a C function any time a scalar's value is used or changed. The C<MAGIC>'s C<mg_ptr> field points to a C<ufuncs> structure: struct ufuncs { I32 (*uf_val)(pTHX_ IV, SV*); I32 (*uf_set)(pTHX_ IV, SV*); IV uf_index; }; When the SV is read from or written to, the C<uf_val> or C<uf_set> function will be called with C<uf_index> as the first arg and a pointer to the SV as the second. A simple example of how to add C<PERL_MAGIC_uvar> magic is shown below. Note that the ufuncs structure is copied by sv_magic, so you can safely allocate it on the stack. void Umagic(sv) SV *sv; PREINIT: struct ufuncs uf; CODE: uf.uf_val = &my_get_fn; uf.uf_set = &my_set_fn; uf.uf_index = 0; sv_magic(sv, 0, PERL_MAGIC_uvar, (char*)&uf, sizeof(uf)); Attaching C<PERL_MAGIC_uvar> to arrays is permissible but has no effect. For hashes there is a specialized hook that gives control over hash keys (but not values). This hook calls C<PERL_MAGIC_uvar> 'get' magic if the "set" function in the C<ufuncs> structure is NULL. The hook is activated whenever the hash is accessed with a key specified as an C<SV> through the functions C<hv_store_ent>, C<hv_fetch_ent>, C<hv_delete_ent>, and C<hv_exists_ent>. Accessing the key as a string through the functions without the C<..._ent> suffix circumvents the hook. See L<Hash::Util::FieldHash/GUTS> for a detailed description. Note that because multiple extensions may be using C<PERL_MAGIC_ext> or C<PERL_MAGIC_uvar> magic, it is important for extensions to take extra care to avoid conflict. Typically only using the magic on objects blessed into the same class as the extension is sufficient. For C<PERL_MAGIC_ext> magic, it is usually a good idea to define an C<MGVTBL>, even if all its fields will be C<0>, so that individual C<MAGIC> pointers can be identified as a particular kind of magic using their magic virtual table. C<mg_findext> provides an easy way to do that: STATIC MGVTBL my_vtbl = { 0, 0, 0, 0, 0, 0, 0, 0 }; MAGIC *mg; if ((mg = mg_findext(sv, PERL_MAGIC_ext, &my_vtbl))) { /* this is really ours, not another module's PERL_MAGIC_ext */ my_priv_data_t *priv = (my_priv_data_t *)mg->mg_ptr; ... } Also note that the C<sv_set*()> and C<sv_cat*()> functions described earlier do B<not> invoke 'set' magic on their targets. This must be done by the user either by calling the C<SvSETMAGIC()> macro after calling these functions, or by using one of the C<sv_set*_mg()> or C<sv_cat*_mg()> functions. Similarly, generic C code must call the C<SvGETMAGIC()> macro to invoke any 'get' magic if they use an SV obtained from external sources in functions that don't handle magic. See L<perlapi> for a description of these functions. For example, calls to the C<sv_cat*()> functions typically need to be followed by C<SvSETMAGIC()>, but they don't need a prior C<SvGETMAGIC()> since their implementation handles 'get' magic. =head2 Finding Magic MAGIC *mg_find(SV *sv, int type); /* Finds the magic pointer of that * type */ This routine returns a pointer to a C<MAGIC> structure stored in the SV. If the SV does not have that magical feature, C<NULL> is returned. If the SV has multiple instances of that magical feature, the first one will be returned. C<mg_findext> can be used to find a C<MAGIC> structure of an SV based on both its magic type and its magic virtual table: MAGIC *mg_findext(SV *sv, int type, MGVTBL *vtbl); Also, if the SV passed to C<mg_find> or C<mg_findext> is not of type SVt_PVMG, Perl may core dump. int mg_copy(SV* sv, SV* nsv, const char* key, STRLEN klen); This routine checks to see what types of magic C<sv> has. If the mg_type field is an uppercase letter, then the mg_obj is copied to C<nsv>, but the mg_type field is changed to be the lowercase letter. =head2 Understanding the Magic of Tied Hashes and Arrays Tied hashes and arrays are magical beasts of the C<PERL_MAGIC_tied> magic type. WARNING: As of the 5.004 release, proper usage of the array and hash access functions requires understanding a few caveats. Some of these caveats are actually considered bugs in the API, to be fixed in later releases, and are bracketed with [MAYCHANGE] below. If you find yourself actually applying such information in this section, be aware that the behavior may change in the future, umm, without warning. The perl tie function associates a variable with an object that implements the various GET, SET, etc methods. To perform the equivalent of the perl tie function from an XSUB, you must mimic this behaviour. The code below carries out the necessary steps -- firstly it creates a new hash, and then creates a second hash which it blesses into the class which will implement the tie methods. Lastly it ties the two hashes together, and returns a reference to the new tied hash. Note that the code below does NOT call the TIEHASH method in the MyTie class - see L</Calling Perl Routines from within C Programs> for details on how to do this. SV* mytie() PREINIT: HV *hash; HV *stash; SV *tie; CODE: hash = newHV(); tie = newRV_noinc((SV*)newHV()); stash = gv_stashpv("MyTie", GV_ADD); sv_bless(tie, stash); hv_magic(hash, (GV*)tie, PERL_MAGIC_tied); RETVAL = newRV_noinc(hash); OUTPUT: RETVAL The C<av_store> function, when given a tied array argument, merely copies the magic of the array onto the value to be "stored", using C<mg_copy>. It may also return NULL, indicating that the value did not actually need to be stored in the array. [MAYCHANGE] After a call to C<av_store> on a tied array, the caller will usually need to call C<mg_set(val)> to actually invoke the perl level "STORE" method on the TIEARRAY object. If C<av_store> did return NULL, a call to C<SvREFCNT_dec(val)> will also be usually necessary to avoid a memory leak. [/MAYCHANGE] The previous paragraph is applicable verbatim to tied hash access using the C<hv_store> and C<hv_store_ent> functions as well. C<av_fetch> and the corresponding hash functions C<hv_fetch> and C<hv_fetch_ent> actually return an undefined mortal value whose magic has been initialized using C<mg_copy>. Note the value so returned does not need to be deallocated, as it is already mortal. [MAYCHANGE] But you will need to call C<mg_get()> on the returned value in order to actually invoke the perl level "FETCH" method on the underlying TIE object. Similarly, you may also call C<mg_set()> on the return value after possibly assigning a suitable value to it using C<sv_setsv>, which will invoke the "STORE" method on the TIE object. [/MAYCHANGE] [MAYCHANGE] In other words, the array or hash fetch/store functions don't really fetch and store actual values in the case of tied arrays and hashes. They merely call C<mg_copy> to attach magic to the values that were meant to be "stored" or "fetched". Later calls to C<mg_get> and C<mg_set> actually do the job of invoking the TIE methods on the underlying objects. Thus the magic mechanism currently implements a kind of lazy access to arrays and hashes. Currently (as of perl version 5.004), use of the hash and array access functions requires the user to be aware of whether they are operating on "normal" hashes and arrays, or on their tied variants. The API may be changed to provide more transparent access to both tied and normal data types in future versions. [/MAYCHANGE] You would do well to understand that the TIEARRAY and TIEHASH interfaces are mere sugar to invoke some perl method calls while using the uniform hash and array syntax. The use of this sugar imposes some overhead (typically about two to four extra opcodes per FETCH/STORE operation, in addition to the creation of all the mortal variables required to invoke the methods). This overhead will be comparatively small if the TIE methods are themselves substantial, but if they are only a few statements long, the overhead will not be insignificant. =head2 Localizing changes Perl has a very handy construction { local $var = 2; ... } This construction is I<approximately> equivalent to { my $oldvar = $var; $var = 2; ... $var = $oldvar; } The biggest difference is that the first construction would reinstate the initial value of $var, irrespective of how control exits the block: C<goto>, C<return>, C<die>/C<eval>, etc. It is a little bit more efficient as well. There is a way to achieve a similar task from C via Perl API: create a I<pseudo-block>, and arrange for some changes to be automatically undone at the end of it, either explicit, or via a non-local exit (via die()). A I<block>-like construct is created by a pair of C<ENTER>/C<LEAVE> macros (see L<perlcall/"Returning a Scalar">). Such a construct may be created specially for some important localized task, or an existing one (like boundaries of enclosing Perl subroutine/block, or an existing pair for freeing TMPs) may be used. (In the second case the overhead of additional localization must be almost negligible.) Note that any XSUB is automatically enclosed in an C<ENTER>/C<LEAVE> pair. Inside such a I<pseudo-block> the following service is available: =over 4 =item C<SAVEINT(int i)> =item C<SAVEIV(IV i)> =item C<SAVEI32(I32 i)> =item C<SAVELONG(long i)> These macros arrange things to restore the value of integer variable C<i> at the end of enclosing I<pseudo-block>. =item C<SAVESPTR(s)> =item C<SAVEPPTR(p)> These macros arrange things to restore the value of pointers C<s> and C<p>. C<s> must be a pointer of a type which survives conversion to C<SV*> and back, C<p> should be able to survive conversion to C<char*> and back. =item C<SAVEFREESV(SV *sv)> The refcount of C<sv> will be decremented at the end of I<pseudo-block>. This is similar to C<sv_2mortal> in that it is also a mechanism for doing a delayed C<SvREFCNT_dec>. However, while C<sv_2mortal> extends the lifetime of C<sv> until the beginning of the next statement, C<SAVEFREESV> extends it until the end of the enclosing scope. These lifetimes can be wildly different. Also compare C<SAVEMORTALIZESV>. =item C<SAVEMORTALIZESV(SV *sv)> Just like C<SAVEFREESV>, but mortalizes C<sv> at the end of the current scope instead of decrementing its reference count. This usually has the effect of keeping C<sv> alive until the statement that called the currently live scope has finished executing. =item C<SAVEFREEOP(OP *op)> The C<OP *> is op_free()ed at the end of I<pseudo-block>. =item C<SAVEFREEPV(p)> The chunk of memory which is pointed to by C<p> is Safefree()ed at the end of I<pseudo-block>. =item C<SAVECLEARSV(SV *sv)> Clears a slot in the current scratchpad which corresponds to C<sv> at the end of I<pseudo-block>. =item C<SAVEDELETE(HV *hv, char *key, I32 length)> The key C<key> of C<hv> is deleted at the end of I<pseudo-block>. The string pointed to by C<key> is Safefree()ed. If one has a I<key> in short-lived storage, the corresponding string may be reallocated like this: SAVEDELETE(PL_defstash, savepv(tmpbuf), strlen(tmpbuf)); =item C<SAVEDESTRUCTOR(DESTRUCTORFUNC_NOCONTEXT_t f, void *p)> At the end of I<pseudo-block> the function C<f> is called with the only argument C<p>. =item C<SAVEDESTRUCTOR_X(DESTRUCTORFUNC_t f, void *p)> At the end of I<pseudo-block> the function C<f> is called with the implicit context argument (if any), and C<p>. =item C<SAVESTACK_POS()> The current offset on the Perl internal stack (cf. C<SP>) is restored at the end of I<pseudo-block>. =back The following API list contains functions, thus one needs to provide pointers to the modifiable data explicitly (either C pointers, or Perlish C<GV *>s). Where the above macros take C<int>, a similar function takes C<int *>. =over 4 =item C<SV* save_scalar(GV *gv)> =for apidoc save_scalar Equivalent to Perl code C<local $gv>. =item C<AV* save_ary(GV *gv)> =for apidoc save_ary =item C<HV* save_hash(GV *gv)> =for apidoc save_hash Similar to C<save_scalar>, but localize C<@gv> and C<%gv>. =item C<void save_item(SV *item)> =for apidoc save_item Duplicates the current value of C<SV>. On the exit from the current C<ENTER>/C<LEAVE> I<pseudo-block> the value of C<SV> will be restored using the stored value. It doesn't handle magic. Use C<save_scalar> if magic is affected. =item C<void save_list(SV **sarg, I32 maxsarg)> =for apidoc save_list A variant of C<save_item> which takes multiple arguments via an array C<sarg> of C<SV*> of length C<maxsarg>. =item C<SV* save_svref(SV **sptr)> =for apidoc save_svref Similar to C<save_scalar>, but will reinstate an C<SV *>. =item C<void save_aptr(AV **aptr)> =item C<void save_hptr(HV **hptr)> =for apidoc save_aptr =for apidoc save_hptr Similar to C<save_svref>, but localize C<AV *> and C<HV *>. =back The C<Alias> module implements localization of the basic types within the I<caller's scope>. People who are interested in how to localize things in the containing scope should take a look there too. =head1 Subroutines =head2 XSUBs and the Argument Stack The XSUB mechanism is a simple way for Perl programs to access C subroutines. An XSUB routine will have a stack that contains the arguments from the Perl program, and a way to map from the Perl data structures to a C equivalent. The stack arguments are accessible through the C<ST(n)> macro, which returns the C<n>'th stack argument. Argument 0 is the first argument passed in the Perl subroutine call. These arguments are C<SV*>, and can be used anywhere an C<SV*> is used. Most of the time, output from the C routine can be handled through use of the RETVAL and OUTPUT directives. However, there are some cases where the argument stack is not already long enough to handle all the return values. An example is the POSIX tzname() call, which takes no arguments, but returns two, the local time zone's standard and summer time abbreviations. To handle this situation, the PPCODE directive is used and the stack is extended using the macro: EXTEND(SP, num); where C<SP> is the macro that represents the local copy of the stack pointer, and C<num> is the number of elements the stack should be extended by. Now that there is room on the stack, values can be pushed on it using C<PUSHs> macro. The pushed values will often need to be "mortal" (See L</Reference Counts and Mortality>): PUSHs(sv_2mortal(newSViv(an_integer))) PUSHs(sv_2mortal(newSVuv(an_unsigned_integer))) PUSHs(sv_2mortal(newSVnv(a_double))) PUSHs(sv_2mortal(newSVpv("Some String",0))) /* Although the last example is better written as the more * efficient: */ PUSHs(newSVpvs_flags("Some String", SVs_TEMP)) And now the Perl program calling C<tzname>, the two values will be assigned as in: ($standard_abbrev, $summer_abbrev) = POSIX::tzname; An alternate (and possibly simpler) method to pushing values on the stack is to use the macro: XPUSHs(SV*) This macro automatically adjusts the stack for you, if needed. Thus, you do not need to call C<EXTEND> to extend the stack. Despite their suggestions in earlier versions of this document the macros C<(X)PUSH[iunp]> are I<not> suited to XSUBs which return multiple results. For that, either stick to the C<(X)PUSHs> macros shown above, or use the new C<m(X)PUSH[iunp]> macros instead; see L</Putting a C value on Perl stack>. For more information, consult L<perlxs> and L<perlxstut>. =head2 Autoloading with XSUBs If an AUTOLOAD routine is an XSUB, as with Perl subroutines, Perl puts the fully-qualified name of the autoloaded subroutine in the $AUTOLOAD variable of the XSUB's package. But it also puts the same information in certain fields of the XSUB itself: HV *stash = CvSTASH(cv); const char *subname = SvPVX(cv); STRLEN name_length = SvCUR(cv); /* in bytes */ U32 is_utf8 = SvUTF8(cv); C<SvPVX(cv)> contains just the sub name itself, not including the package. For an AUTOLOAD routine in UNIVERSAL or one of its superclasses, C<CvSTASH(cv)> returns NULL during a method call on a nonexistent package. B<Note>: Setting $AUTOLOAD stopped working in 5.6.1, which did not support XS AUTOLOAD subs at all. Perl 5.8.0 introduced the use of fields in the XSUB itself. Perl 5.16.0 restored the setting of $AUTOLOAD. If you need to support 5.8-5.14, use the XSUB's fields. =head2 Calling Perl Routines from within C Programs There are four routines that can be used to call a Perl subroutine from within a C program. These four are: I32 call_sv(SV*, I32); I32 call_pv(const char*, I32); I32 call_method(const char*, I32); I32 call_argv(const char*, I32, char**); The routine most often used is C<call_sv>. The C<SV*> argument contains either the name of the Perl subroutine to be called, or a reference to the subroutine. The second argument consists of flags that control the context in which the subroutine is called, whether or not the subroutine is being passed arguments, how errors should be trapped, and how to treat return values. All four routines return the number of arguments that the subroutine returned on the Perl stack. These routines used to be called C<perl_call_sv>, etc., before Perl v5.6.0, but those names are now deprecated; macros of the same name are provided for compatibility. When using any of these routines (except C<call_argv>), the programmer must manipulate the Perl stack. These include the following macros and functions: dSP SP PUSHMARK() PUTBACK SPAGAIN ENTER SAVETMPS FREETMPS LEAVE XPUSH*() POP*() For a detailed description of calling conventions from C to Perl, consult L<perlcall>. =head2 Putting a C value on Perl stack A lot of opcodes (this is an elementary operation in the internal perl stack machine) put an SV* on the stack. However, as an optimization the corresponding SV is (usually) not recreated each time. The opcodes reuse specially assigned SVs (I<target>s) which are (as a corollary) not constantly freed/created. Each of the targets is created only once (but see L</Scratchpads and recursion> below), and when an opcode needs to put an integer, a double, or a string on stack, it just sets the corresponding parts of its I<target> and puts the I<target> on stack. The macro to put this target on stack is C<PUSHTARG>, and it is directly used in some opcodes, as well as indirectly in zillions of others, which use it via C<(X)PUSH[iunp]>. Because the target is reused, you must be careful when pushing multiple values on the stack. The following code will not do what you think: XPUSHi(10); XPUSHi(20); This translates as "set C<TARG> to 10, push a pointer to C<TARG> onto the stack; set C<TARG> to 20, push a pointer to C<TARG> onto the stack". At the end of the operation, the stack does not contain the values 10 and 20, but actually contains two pointers to C<TARG>, which we have set to 20. If you need to push multiple different values then you should either use the C<(X)PUSHs> macros, or else use the new C<m(X)PUSH[iunp]> macros, none of which make use of C<TARG>. The C<(X)PUSHs> macros simply push an SV* on the stack, which, as noted under L</XSUBs and the Argument Stack>, will often need to be "mortal". The new C<m(X)PUSH[iunp]> macros make this a little easier to achieve by creating a new mortal for you (via C<(X)PUSHmortal>), pushing that onto the stack (extending it if necessary in the case of the C<mXPUSH[iunp]> macros), and then setting its value. Thus, instead of writing this to "fix" the example above: XPUSHs(sv_2mortal(newSViv(10))) XPUSHs(sv_2mortal(newSViv(20))) you can simply write: mXPUSHi(10) mXPUSHi(20) On a related note, if you do use C<(X)PUSH[iunp]>, then you're going to need a C<dTARG> in your variable declarations so that the C<*PUSH*> macros can make use of the local variable C<TARG>. See also C<dTARGET> and C<dXSTARG>. =head2 Scratchpads The question remains on when the SVs which are I<target>s for opcodes are created. The answer is that they are created when the current unit--a subroutine or a file (for opcodes for statements outside of subroutines)--is compiled. During this time a special anonymous Perl array is created, which is called a scratchpad for the current unit. A scratchpad keeps SVs which are lexicals for the current unit and are targets for opcodes. A previous version of this document stated that one can deduce that an SV lives on a scratchpad by looking on its flags: lexicals have C<SVs_PADMY> set, and I<target>s have C<SVs_PADTMP> set. But this has never been fully true. C<SVs_PADMY> could be set on a variable that no longer resides in any pad. While I<target>s do have C<SVs_PADTMP> set, it can also be set on variables that have never resided in a pad, but nonetheless act like I<target>s. As of perl 5.21.5, the C<SVs_PADMY> flag is no longer used and is defined as 0. C<SvPADMY()> now returns true for anything without C<SVs_PADTMP>. The correspondence between OPs and I<target>s is not 1-to-1. Different OPs in the compile tree of the unit can use the same target, if this would not conflict with the expected life of the temporary. =head2 Scratchpads and recursion In fact it is not 100% true that a compiled unit contains a pointer to the scratchpad AV. In fact it contains a pointer to an AV of (initially) one element, and this element is the scratchpad AV. Why do we need an extra level of indirection? The answer is B<recursion>, and maybe B<threads>. Both these can create several execution pointers going into the same subroutine. For the subroutine-child not write over the temporaries for the subroutine-parent (lifespan of which covers the call to the child), the parent and the child should have different scratchpads. (I<And> the lexicals should be separate anyway!) So each subroutine is born with an array of scratchpads (of length 1). On each entry to the subroutine it is checked that the current depth of the recursion is not more than the length of this array, and if it is, new scratchpad is created and pushed into the array. The I<target>s on this scratchpad are C<undef>s, but they are already marked with correct flags. =head1 Memory Allocation =head2 Allocation All memory meant to be used with the Perl API functions should be manipulated using the macros described in this section. The macros provide the necessary transparency between differences in the actual malloc implementation that is used within perl. The following three macros are used to initially allocate memory : Newx(pointer, number, type); Newxc(pointer, number, type, cast); Newxz(pointer, number, type); The first argument C<pointer> should be the name of a variable that will point to the newly allocated memory. The second and third arguments C<number> and C<type> specify how many of the specified type of data structure should be allocated. The argument C<type> is passed to C<sizeof>. The final argument to C<Newxc>, C<cast>, should be used if the C<pointer> argument is different from the C<type> argument. Unlike the C<Newx> and C<Newxc> macros, the C<Newxz> macro calls C<memzero> to zero out all the newly allocated memory. =head2 Reallocation Renew(pointer, number, type); Renewc(pointer, number, type, cast); Safefree(pointer) These three macros are used to change a memory buffer size or to free a piece of memory no longer needed. The arguments to C<Renew> and C<Renewc> match those of C<New> and C<Newc> with the exception of not needing the "magic cookie" argument. =head2 Moving Move(source, dest, number, type); Copy(source, dest, number, type); Zero(dest, number, type); These three macros are used to move, copy, or zero out previously allocated memory. The C<source> and C<dest> arguments point to the source and destination starting points. Perl will move, copy, or zero out C<number> instances of the size of the C<type> data structure (using the C<sizeof> function). =head1 PerlIO The most recent development releases of Perl have been experimenting with removing Perl's dependency on the "normal" standard I/O suite and allowing other stdio implementations to be used. This involves creating a new abstraction layer that then calls whichever implementation of stdio Perl was compiled with. All XSUBs should now use the functions in the PerlIO abstraction layer and not make any assumptions about what kind of stdio is being used. For a complete description of the PerlIO abstraction, consult L<perlapio>. =head1 Compiled code =head2 Code tree Here we describe the internal form your code is converted to by Perl. Start with a simple example: $a = $b + $c; This is converted to a tree similar to this one: assign-to / \ + $a / \ $b $c (but slightly more complicated). This tree reflects the way Perl parsed your code, but has nothing to do with the execution order. There is an additional "thread" going through the nodes of the tree which shows the order of execution of the nodes. In our simplified example above it looks like: $b ---> $c ---> + ---> $a ---> assign-to But with the actual compile tree for C<$a = $b + $c> it is different: some nodes I<optimized away>. As a corollary, though the actual tree contains more nodes than our simplified example, the execution order is the same as in our example. =head2 Examining the tree If you have your perl compiled for debugging (usually done with C<-DDEBUGGING> on the C<Configure> command line), you may examine the compiled tree by specifying C<-Dx> on the Perl command line. The output takes several lines per node, and for C<$b+$c> it looks like this: 5 TYPE = add ===> 6 TARG = 1 FLAGS = (SCALAR,KIDS) { TYPE = null ===> (4) (was rv2sv) FLAGS = (SCALAR,KIDS) { 3 TYPE = gvsv ===> 4 FLAGS = (SCALAR) GV = main::b } } { TYPE = null ===> (5) (was rv2sv) FLAGS = (SCALAR,KIDS) { 4 TYPE = gvsv ===> 5 FLAGS = (SCALAR) GV = main::c } } This tree has 5 nodes (one per C<TYPE> specifier), only 3 of them are not optimized away (one per number in the left column). The immediate children of the given node correspond to C<{}> pairs on the same level of indentation, thus this listing corresponds to the tree: add / \ null null | | gvsv gvsv The execution order is indicated by C<===E<gt>> marks, thus it is C<3 4 5 6> (node C<6> is not included into above listing), i.e., C<gvsv gvsv add whatever>. Each of these nodes represents an op, a fundamental operation inside the Perl core. The code which implements each operation can be found in the F<pp*.c> files; the function which implements the op with type C<gvsv> is C<pp_gvsv>, and so on. As the tree above shows, different ops have different numbers of children: C<add> is a binary operator, as one would expect, and so has two children. To accommodate the various different numbers of children, there are various types of op data structure, and they link together in different ways. The simplest type of op structure is C<OP>: this has no children. Unary operators, C<UNOP>s, have one child, and this is pointed to by the C<op_first> field. Binary operators (C<BINOP>s) have not only an C<op_first> field but also an C<op_last> field. The most complex type of op is a C<LISTOP>, which has any number of children. In this case, the first child is pointed to by C<op_first> and the last child by C<op_last>. The children in between can be found by iteratively following the C<OpSIBLING> pointer from the first child to the last (but see below). There are also some other op types: a C<PMOP> holds a regular expression, and has no children, and a C<LOOP> may or may not have children. If the C<op_children> field is non-zero, it behaves like a C<LISTOP>. To complicate matters, if a C<UNOP> is actually a C<null> op after optimization (see L</Compile pass 2: context propagation>) it will still have children in accordance with its former type. Finally, there is a C<LOGOP>, or logic op. Like a C<LISTOP>, this has one or more children, but it doesn't have an C<op_last> field: so you have to follow C<op_first> and then the C<OpSIBLING> chain itself to find the last child. Instead it has an C<op_other> field, which is comparable to the C<op_next> field described below, and represents an alternate execution path. Operators like C<and>, C<or> and C<?> are C<LOGOP>s. Note that in general, C<op_other> may not point to any of the direct children of the C<LOGOP>. Starting in version 5.21.2, perls built with the experimental define C<-DPERL_OP_PARENT> add an extra boolean flag for each op, C<op_moresib>. When not set, this indicates that this is the last op in an C<OpSIBLING> chain. This frees up the C<op_sibling> field on the last sibling to point back to the parent op. Under this build, that field is also renamed C<op_sibparent> to reflect its joint role. The macro C<OpSIBLING(o)> wraps this special behaviour, and always returns NULL on the last sibling. With this build the C<op_parent(o)> function can be used to find the parent of any op. Thus for forward compatibility, you should always use the C<OpSIBLING(o)> macro rather than accessing C<op_sibling> directly. Another way to examine the tree is to use a compiler back-end module, such as L<B::Concise>. =head2 Compile pass 1: check routines The tree is created by the compiler while I<yacc> code feeds it the constructions it recognizes. Since I<yacc> works bottom-up, so does the first pass of perl compilation. What makes this pass interesting for perl developers is that some optimization may be performed on this pass. This is optimization by so-called "check routines". The correspondence between node names and corresponding check routines is described in F<opcode.pl> (do not forget to run C<make regen_headers> if you modify this file). A check routine is called when the node is fully constructed except for the execution-order thread. Since at this time there are no back-links to the currently constructed node, one can do most any operation to the top-level node, including freeing it and/or creating new nodes above/below it. The check routine returns the node which should be inserted into the tree (if the top-level node was not modified, check routine returns its argument). By convention, check routines have names C<ck_*>. They are usually called from C<new*OP> subroutines (or C<convert>) (which in turn are called from F<perly.y>). =head2 Compile pass 1a: constant folding Immediately after the check routine is called the returned node is checked for being compile-time executable. If it is (the value is judged to be constant) it is immediately executed, and a I<constant> node with the "return value" of the corresponding subtree is substituted instead. The subtree is deleted. If constant folding was not performed, the execution-order thread is created. =head2 Compile pass 2: context propagation When a context for a part of compile tree is known, it is propagated down through the tree. At this time the context can have 5 values (instead of 2 for runtime context): void, boolean, scalar, list, and lvalue. In contrast with the pass 1 this pass is processed from top to bottom: a node's context determines the context for its children. Additional context-dependent optimizations are performed at this time. Since at this moment the compile tree contains back-references (via "thread" pointers), nodes cannot be free()d now. To allow optimized-away nodes at this stage, such nodes are null()ified instead of free()ing (i.e. their type is changed to OP_NULL). =head2 Compile pass 3: peephole optimization After the compile tree for a subroutine (or for an C<eval> or a file) is created, an additional pass over the code is performed. This pass is neither top-down or bottom-up, but in the execution order (with additional complications for conditionals). Optimizations performed at this stage are subject to the same restrictions as in the pass 2. Peephole optimizations are done by calling the function pointed to by the global variable C<PL_peepp>. By default, C<PL_peepp> just calls the function pointed to by the global variable C<PL_rpeepp>. By default, that performs some basic op fixups and optimisations along the execution-order op chain, and recursively calls C<PL_rpeepp> for each side chain of ops (resulting from conditionals). Extensions may provide additional optimisations or fixups, hooking into either the per-subroutine or recursive stage, like this: static peep_t prev_peepp; static void my_peep(pTHX_ OP *o) { /* custom per-subroutine optimisation goes here */ prev_peepp(aTHX_ o); /* custom per-subroutine optimisation may also go here */ } BOOT: prev_peepp = PL_peepp; PL_peepp = my_peep; static peep_t prev_rpeepp; static void my_rpeep(pTHX_ OP *o) { OP *orig_o = o; for(; o; o = o->op_next) { /* custom per-op optimisation goes here */ } prev_rpeepp(aTHX_ orig_o); } BOOT: prev_rpeepp = PL_rpeepp; PL_rpeepp = my_rpeep; =head2 Pluggable runops The compile tree is executed in a runops function. There are two runops functions, in F<run.c> and in F<dump.c>. C<Perl_runops_debug> is used with DEBUGGING and C<Perl_runops_standard> is used otherwise. For fine control over the execution of the compile tree it is possible to provide your own runops function. It's probably best to copy one of the existing runops functions and change it to suit your needs. Then, in the BOOT section of your XS file, add the line: PL_runops = my_runops; This function should be as efficient as possible to keep your programs running as fast as possible. =head2 Compile-time scope hooks As of perl 5.14 it is possible to hook into the compile-time lexical scope mechanism using C<Perl_blockhook_register>. This is used like this: STATIC void my_start_hook(pTHX_ int full); STATIC BHK my_hooks; BOOT: BhkENTRY_set(&my_hooks, bhk_start, my_start_hook); Perl_blockhook_register(aTHX_ &my_hooks); This will arrange to have C<my_start_hook> called at the start of compiling every lexical scope. The available hooks are: =over 4 =item C<void bhk_start(pTHX_ int full)> This is called just after starting a new lexical scope. Note that Perl code like if ($x) { ... } creates two scopes: the first starts at the C<(> and has C<full == 1>, the second starts at the C<{> and has C<full == 0>. Both end at the C<}>, so calls to C<start> and C<pre>/C<post_end> will match. Anything pushed onto the save stack by this hook will be popped just before the scope ends (between the C<pre_> and C<post_end> hooks, in fact). =item C<void bhk_pre_end(pTHX_ OP **o)> This is called at the end of a lexical scope, just before unwinding the stack. I<o> is the root of the optree representing the scope; it is a double pointer so you can replace the OP if you need to. =item C<void bhk_post_end(pTHX_ OP **o)> This is called at the end of a lexical scope, just after unwinding the stack. I<o> is as above. Note that it is possible for calls to C<pre_> and C<post_end> to nest, if there is something on the save stack that calls string eval. =item C<void bhk_eval(pTHX_ OP *const o)> This is called just before starting to compile an C<eval STRING>, C<do FILE>, C<require> or C<use>, after the eval has been set up. I<o> is the OP that requested the eval, and will normally be an C<OP_ENTEREVAL>, C<OP_DOFILE> or C<OP_REQUIRE>. =back Once you have your hook functions, you need a C<BHK> structure to put them in. It's best to allocate it statically, since there is no way to free it once it's registered. The function pointers should be inserted into this structure using the C<BhkENTRY_set> macro, which will also set flags indicating which entries are valid. If you do need to allocate your C<BHK> dynamically for some reason, be sure to zero it before you start. Once registered, there is no mechanism to switch these hooks off, so if that is necessary you will need to do this yourself. An entry in C<%^H> is probably the best way, so the effect is lexically scoped; however it is also possible to use the C<BhkDISABLE> and C<BhkENABLE> macros to temporarily switch entries on and off. You should also be aware that generally speaking at least one scope will have opened before your extension is loaded, so you will see some C<pre>/C<post_end> pairs that didn't have a matching C<start>. =head1 Examining internal data structures with the C<dump> functions To aid debugging, the source file F<dump.c> contains a number of functions which produce formatted output of internal data structures. The most commonly used of these functions is C<Perl_sv_dump>; it's used for dumping SVs, AVs, HVs, and CVs. The C<Devel::Peek> module calls C<sv_dump> to produce debugging output from Perl-space, so users of that module should already be familiar with its format. C<Perl_op_dump> can be used to dump an C<OP> structure or any of its derivatives, and produces output similar to C<perl -Dx>; in fact, C<Perl_dump_eval> will dump the main root of the code being evaluated, exactly like C<-Dx>. Other useful functions are C<Perl_dump_sub>, which turns a C<GV> into an op tree, C<Perl_dump_packsubs> which calls C<Perl_dump_sub> on all the subroutines in a package like so: (Thankfully, these are all xsubs, so there is no op tree) (gdb) print Perl_dump_packsubs(PL_defstash) SUB attributes::bootstrap = (xsub 0x811fedc 0) SUB UNIVERSAL::can = (xsub 0x811f50c 0) SUB UNIVERSAL::isa = (xsub 0x811f304 0) SUB UNIVERSAL::VERSION = (xsub 0x811f7ac 0) SUB DynaLoader::boot_DynaLoader = (xsub 0x805b188 0) and C<Perl_dump_all>, which dumps all the subroutines in the stash and the op tree of the main root. =head1 How multiple interpreters and concurrency are supported =head2 Background and PERL_IMPLICIT_CONTEXT The Perl interpreter can be regarded as a closed box: it has an API for feeding it code or otherwise making it do things, but it also has functions for its own use. This smells a lot like an object, and there are ways for you to build Perl so that you can have multiple interpreters, with one interpreter represented either as a C structure, or inside a thread-specific structure. These structures contain all the context, the state of that interpreter. One macro controls the major Perl build flavor: MULTIPLICITY. The MULTIPLICITY build has a C structure that packages all the interpreter state. With multiplicity-enabled perls, PERL_IMPLICIT_CONTEXT is also normally defined, and enables the support for passing in a "hidden" first argument that represents all three data structures. MULTIPLICITY makes multi-threaded perls possible (with the ithreads threading model, related to the macro USE_ITHREADS.) Two other "encapsulation" macros are the PERL_GLOBAL_STRUCT and PERL_GLOBAL_STRUCT_PRIVATE (the latter turns on the former, and the former turns on MULTIPLICITY.) The PERL_GLOBAL_STRUCT causes all the internal variables of Perl to be wrapped inside a single global struct, struct perl_vars, accessible as (globals) &PL_Vars or PL_VarsPtr or the function Perl_GetVars(). The PERL_GLOBAL_STRUCT_PRIVATE goes one step further, there is still a single struct (allocated in main() either from heap or from stack) but there are no global data symbols pointing to it. In either case the global struct should be initialized as the very first thing in main() using Perl_init_global_struct() and correspondingly tear it down after perl_free() using Perl_free_global_struct(), please see F<miniperlmain.c> for usage details. You may also need to use C<dVAR> in your coding to "declare the global variables" when you are using them. dTHX does this for you automatically. =for apidoc Amnh||dVAR To see whether you have non-const data you can use a BSD (or GNU) compatible C<nm>: nm libperl.a | grep -v ' [TURtr] ' If this displays any C<D> or C<d> symbols (or possibly C<C> or C<c>), you have non-const data. The symbols the C<grep> removed are as follows: C<Tt> are I<text>, or code, the C<Rr> are I<read-only> (const) data, and the C<U> is <undefined>, external symbols referred to. The test F<t/porting/libperl.t> does this kind of symbol sanity checking on C<libperl.a>. For backward compatibility reasons defining just PERL_GLOBAL_STRUCT doesn't actually hide all symbols inside a big global struct: some PerlIO_xxx vtables are left visible. The PERL_GLOBAL_STRUCT_PRIVATE then hides everything (see how the PERLIO_FUNCS_DECL is used). All this obviously requires a way for the Perl internal functions to be either subroutines taking some kind of structure as the first argument, or subroutines taking nothing as the first argument. To enable these two very different ways of building the interpreter, the Perl source (as it does in so many other situations) makes heavy use of macros and subroutine naming conventions. First problem: deciding which functions will be public API functions and which will be private. All functions whose names begin C<S_> are private (think "S" for "secret" or "static"). All other functions begin with "Perl_", but just because a function begins with "Perl_" does not mean it is part of the API. (See L</Internal Functions>.) The easiest way to be B<sure> a function is part of the API is to find its entry in L<perlapi>. If it exists in L<perlapi>, it's part of the API. If it doesn't, and you think it should be (i.e., you need it for your extension), submit an issue at L<https://github.com/Perl/perl5/issues> explaining why you think it should be. Second problem: there must be a syntax so that the same subroutine declarations and calls can pass a structure as their first argument, or pass nothing. To solve this, the subroutines are named and declared in a particular way. Here's a typical start of a static function used within the Perl guts: STATIC void S_incline(pTHX_ char *s) STATIC becomes "static" in C, and may be #define'd to nothing in some configurations in the future. A public function (i.e. part of the internal API, but not necessarily sanctioned for use in extensions) begins like this: void Perl_sv_setiv(pTHX_ SV* dsv, IV num) C<pTHX_> is one of a number of macros (in F<perl.h>) that hide the details of the interpreter's context. THX stands for "thread", "this", or "thingy", as the case may be. (And no, George Lucas is not involved. :-) The first character could be 'p' for a B<p>rototype, 'a' for B<a>rgument, or 'd' for B<d>eclaration, so we have C<pTHX>, C<aTHX> and C<dTHX>, and their variants. =for apidoc Amnh||aTHX =for apidoc Amnh||aTHX_ =for apidoc Amnh||dTHX =for apidoc Amnh||pTHX =for apidoc Amnh||pTHX_ When Perl is built without options that set PERL_IMPLICIT_CONTEXT, there is no first argument containing the interpreter's context. The trailing underscore in the pTHX_ macro indicates that the macro expansion needs a comma after the context argument because other arguments follow it. If PERL_IMPLICIT_CONTEXT is not defined, pTHX_ will be ignored, and the subroutine is not prototyped to take the extra argument. The form of the macro without the trailing underscore is used when there are no additional explicit arguments. When a core function calls another, it must pass the context. This is normally hidden via macros. Consider C<sv_setiv>. It expands into something like this: #ifdef PERL_IMPLICIT_CONTEXT #define sv_setiv(a,b) Perl_sv_setiv(aTHX_ a, b) /* can't do this for vararg functions, see below */ #else #define sv_setiv Perl_sv_setiv #endif This works well, and means that XS authors can gleefully write: sv_setiv(foo, bar); and still have it work under all the modes Perl could have been compiled with. This doesn't work so cleanly for varargs functions, though, as macros imply that the number of arguments is known in advance. Instead we either need to spell them out fully, passing C<aTHX_> as the first argument (the Perl core tends to do this with functions like Perl_warner), or use a context-free version. The context-free version of Perl_warner is called Perl_warner_nocontext, and does not take the extra argument. Instead it does C<dTHX;> to get the context from thread-local storage. We C<#define warner Perl_warner_nocontext> so that extensions get source compatibility at the expense of performance. (Passing an arg is cheaper than grabbing it from thread-local storage.) You can ignore [pad]THXx when browsing the Perl headers/sources. Those are strictly for use within the core. Extensions and embedders need only be aware of [pad]THX. =head2 So what happened to dTHR? =for apidoc Amnh||dTHR C<dTHR> was introduced in perl 5.005 to support the older thread model. The older thread model now uses the C<THX> mechanism to pass context pointers around, so C<dTHR> is not useful any more. Perl 5.6.0 and later still have it for backward source compatibility, but it is defined to be a no-op. =head2 How do I use all this in extensions? When Perl is built with PERL_IMPLICIT_CONTEXT, extensions that call any functions in the Perl API will need to pass the initial context argument somehow. The kicker is that you will need to write it in such a way that the extension still compiles when Perl hasn't been built with PERL_IMPLICIT_CONTEXT enabled. There are three ways to do this. First, the easy but inefficient way, which is also the default, in order to maintain source compatibility with extensions: whenever F<XSUB.h> is #included, it redefines the aTHX and aTHX_ macros to call a function that will return the context. Thus, something like: sv_setiv(sv, num); in your extension will translate to this when PERL_IMPLICIT_CONTEXT is in effect: Perl_sv_setiv(Perl_get_context(), sv, num); or to this otherwise: Perl_sv_setiv(sv, num); You don't have to do anything new in your extension to get this; since the Perl library provides Perl_get_context(), it will all just work. The second, more efficient way is to use the following template for your Foo.xs: #define PERL_NO_GET_CONTEXT /* we want efficiency */ #include "EXTERN.h" #include "perl.h" #include "XSUB.h" STATIC void my_private_function(int arg1, int arg2); STATIC void my_private_function(int arg1, int arg2) { dTHX; /* fetch context */ ... call many Perl API functions ... } [... etc ...] MODULE = Foo PACKAGE = Foo /* typical XSUB */ void my_xsub(arg) int arg CODE: my_private_function(arg, 10); Note that the only two changes from the normal way of writing an extension is the addition of a C<#define PERL_NO_GET_CONTEXT> before including the Perl headers, followed by a C<dTHX;> declaration at the start of every function that will call the Perl API. (You'll know which functions need this, because the C compiler will complain that there's an undeclared identifier in those functions.) No changes are needed for the XSUBs themselves, because the XS() macro is correctly defined to pass in the implicit context if needed. The third, even more efficient way is to ape how it is done within the Perl guts: #define PERL_NO_GET_CONTEXT /* we want efficiency */ #include "EXTERN.h" #include "perl.h" #include "XSUB.h" /* pTHX_ only needed for functions that call Perl API */ STATIC void my_private_function(pTHX_ int arg1, int arg2); STATIC void my_private_function(pTHX_ int arg1, int arg2) { /* dTHX; not needed here, because THX is an argument */ ... call Perl API functions ... } [... etc ...] MODULE = Foo PACKAGE = Foo /* typical XSUB */ void my_xsub(arg) int arg CODE: my_private_function(aTHX_ arg, 10); This implementation never has to fetch the context using a function call, since it is always passed as an extra argument. Depending on your needs for simplicity or efficiency, you may mix the previous two approaches freely. Never add a comma after C<pTHX> yourself--always use the form of the macro with the underscore for functions that take explicit arguments, or the form without the argument for functions with no explicit arguments. If one is compiling Perl with the C<-DPERL_GLOBAL_STRUCT> the C<dVAR> definition is needed if the Perl global variables (see F<perlvars.h> or F<globvar.sym>) are accessed in the function and C<dTHX> is not used (the C<dTHX> includes the C<dVAR> if necessary). One notices the need for C<dVAR> only with the said compile-time define, because otherwise the Perl global variables are visible as-is. =head2 Should I do anything special if I call perl from multiple threads? If you create interpreters in one thread and then proceed to call them in another, you need to make sure perl's own Thread Local Storage (TLS) slot is initialized correctly in each of those threads. The C<perl_alloc> and C<perl_clone> API functions will automatically set the TLS slot to the interpreter they created, so that there is no need to do anything special if the interpreter is always accessed in the same thread that created it, and that thread did not create or call any other interpreters afterwards. If that is not the case, you have to set the TLS slot of the thread before calling any functions in the Perl API on that particular interpreter. This is done by calling the C<PERL_SET_CONTEXT> macro in that thread as the first thing you do: /* do this before doing anything else with some_perl */ PERL_SET_CONTEXT(some_perl); ... other Perl API calls on some_perl go here ... =head2 Future Plans and PERL_IMPLICIT_SYS Just as PERL_IMPLICIT_CONTEXT provides a way to bundle up everything that the interpreter knows about itself and pass it around, so too are there plans to allow the interpreter to bundle up everything it knows about the environment it's running on. This is enabled with the PERL_IMPLICIT_SYS macro. Currently it only works with USE_ITHREADS on Windows. This allows the ability to provide an extra pointer (called the "host" environment) for all the system calls. This makes it possible for all the system stuff to maintain their own state, broken down into seven C structures. These are thin wrappers around the usual system calls (see F<win32/perllib.c>) for the default perl executable, but for a more ambitious host (like the one that would do fork() emulation) all the extra work needed to pretend that different interpreters are actually different "processes", would be done here. The Perl engine/interpreter and the host are orthogonal entities. There could be one or more interpreters in a process, and one or more "hosts", with free association between them. =head1 Internal Functions All of Perl's internal functions which will be exposed to the outside world are prefixed by C<Perl_> so that they will not conflict with XS functions or functions used in a program in which Perl is embedded. Similarly, all global variables begin with C<PL_>. (By convention, static functions start with C<S_>.) Inside the Perl core (C<PERL_CORE> defined), you can get at the functions either with or without the C<Perl_> prefix, thanks to a bunch of defines that live in F<embed.h>. Note that extension code should I<not> set C<PERL_CORE>; this exposes the full perl internals, and is likely to cause breakage of the XS in each new perl release. The file F<embed.h> is generated automatically from F<embed.pl> and F<embed.fnc>. F<embed.pl> also creates the prototyping header files for the internal functions, generates the documentation and a lot of other bits and pieces. It's important that when you add a new function to the core or change an existing one, you change the data in the table in F<embed.fnc> as well. Here's a sample entry from that table: Apd |SV** |av_fetch |AV* ar|I32 key|I32 lval The first column is a set of flags, the second column the return type, the third column the name. Columns after that are the arguments. The flags are documented at the top of F<embed.fnc>. If you edit F<embed.pl> or F<embed.fnc>, you will need to run C<make regen_headers> to force a rebuild of F<embed.h> and other auto-generated files. =head2 Formatted Printing of IVs, UVs, and NVs If you are printing IVs, UVs, or NVS instead of the stdio(3) style formatting codes like C<%d>, C<%ld>, C<%f>, you should use the following macros for portability IVdf IV in decimal UVuf UV in decimal UVof UV in octal UVxf UV in hexadecimal NVef NV %e-like NVff NV %f-like NVgf NV %g-like =for apidoc Amnh||IVdf =for apidoc Amnh||UVuf =for apidoc Amnh||UVof =for apidoc Amnh||UVxf =for apidoc Amnh||NVef =for apidoc Amnh||NVff =for apidoc Amnh||NVgf These will take care of 64-bit integers and long doubles. For example: printf("IV is %" IVdf "\n", iv); The C<IVdf> will expand to whatever is the correct format for the IVs. Note that the spaces are required around the format in case the code is compiled with C++, to maintain compliance with its standard. Note that there are different "long doubles": Perl will use whatever the compiler has. If you are printing addresses of pointers, use %p or UVxf combined with PTR2UV(). =head2 Formatted Printing of SVs The contents of SVs may be printed using the C<SVf> format, like so: Perl_croak(aTHX_ "This croaked because: %" SVf "\n", SvfARG(err_msg)) where C<err_msg> is an SV. =for apidoc Amnh||SVf =for apidoc Amh||SVfARG|SV *sv Not all scalar types are printable. Simple values certainly are: one of IV, UV, NV, or PV. Also, if the SV is a reference to some value, either it will be dereferenced and the value printed, or information about the type of that value and its address are displayed. The results of printing any other type of SV are undefined and likely to lead to an interpreter crash. NVs are printed using a C<%g>-ish format. Note that the spaces are required around the C<SVf> in case the code is compiled with C++, to maintain compliance with its standard. Note that any filehandle being printed to under UTF-8 must be expecting UTF-8 in order to get good results and avoid Wide-character warnings. One way to do this for typical filehandles is to invoke perl with the C<-C>> parameter. (See L<perlrun/-C [numberE<sol>list]>. You can use this to concatenate two scalars: SV *var1 = get_sv("var1", GV_ADD); SV *var2 = get_sv("var2", GV_ADD); SV *var3 = newSVpvf("var1=%" SVf " and var2=%" SVf, SVfARG(var1), SVfARG(var2)); =head2 Formatted Printing of Strings If you just want the bytes printed in a 7bit NUL-terminated string, you can just use C<%s> (assuming they are all really only 7bit). But if there is a possibility the value will be encoded as UTF-8 or contains bytes above C<0x7F> (and therefore 8bit), you should instead use the C<UTF8f> format. And as its parameter, use the C<UTF8fARG()> macro: chr * msg; /* U+2018: \xE2\x80\x98 LEFT SINGLE QUOTATION MARK U+2019: \xE2\x80\x99 RIGHT SINGLE QUOTATION MARK */ if (can_utf8) msg = "\xE2\x80\x98Uses fancy quotes\xE2\x80\x99"; else msg = "'Uses simple quotes'"; Perl_croak(aTHX_ "The message is: %" UTF8f "\n", UTF8fARG(can_utf8, strlen(msg), msg)); The first parameter to C<UTF8fARG> is a boolean: 1 if the string is in UTF-8; 0 if string is in native byte encoding (Latin1). The second parameter is the number of bytes in the string to print. And the third and final parameter is a pointer to the first byte in the string. Note that any filehandle being printed to under UTF-8 must be expecting UTF-8 in order to get good results and avoid Wide-character warnings. One way to do this for typical filehandles is to invoke perl with the C<-C>> parameter. (See L<perlrun/-C [numberE<sol>list]>. =head2 Formatted Printing of C<Size_t> and C<SSize_t> The most general way to do this is to cast them to a UV or IV, and print as in the L<previous section|/Formatted Printing of IVs, UVs, and NVs>. But if you're using C<PerlIO_printf()>, it's less typing and visual clutter to use the C<%z> length modifier (for I<siZe>): PerlIO_printf("STRLEN is %zu\n", len); This modifier is not portable, so its use should be restricted to C<PerlIO_printf()>. =head2 Pointer-To-Integer and Integer-To-Pointer Because pointer size does not necessarily equal integer size, use the follow macros to do it right. PTR2UV(pointer) PTR2IV(pointer) PTR2NV(pointer) INT2PTR(pointertotype, integer) =for apidoc Amh|void *|INT2PTR|type|int value =for apidoc Amh|UV|PTR2UV|void * =for apidoc Amh|IV|PTR2IV|void * =for apidoc Amh|NV|PTR2NV|void * For example: IV iv = ...; SV *sv = INT2PTR(SV*, iv); and AV *av = ...; UV uv = PTR2UV(av); =head2 Exception Handling There are a couple of macros to do very basic exception handling in XS modules. You have to define C<NO_XSLOCKS> before including F<XSUB.h> to be able to use these macros: #define NO_XSLOCKS #include "XSUB.h" You can use these macros if you call code that may croak, but you need to do some cleanup before giving control back to Perl. For example: dXCPT; /* set up necessary variables */ XCPT_TRY_START { code_that_may_croak(); } XCPT_TRY_END XCPT_CATCH { /* do cleanup here */ XCPT_RETHROW; } Note that you always have to rethrow an exception that has been caught. Using these macros, it is not possible to just catch the exception and ignore it. If you have to ignore the exception, you have to use the C<call_*> function. The advantage of using the above macros is that you don't have to setup an extra function for C<call_*>, and that using these macros is faster than using C<call_*>. =head2 Source Documentation There's an effort going on to document the internal functions and automatically produce reference manuals from them -- L<perlapi> is one such manual which details all the functions which are available to XS writers. L<perlintern> is the autogenerated manual for the functions which are not part of the API and are supposedly for internal use only. =for comment skip apidoc The following is an example and shouldn't be read as a real apidoc line Source documentation is created by putting POD comments into the C source, like this: /* =for apidoc sv_setiv Copies an integer into the given SV. Does not handle 'set' magic. See L<perlapi/sv_setiv_mg>. =cut */ Please try and supply some documentation if you add functions to the Perl core. =head2 Backwards compatibility The Perl API changes over time. New functions are added or the interfaces of existing functions are changed. The C<Devel::PPPort> module tries to provide compatibility code for some of these changes, so XS writers don't have to code it themselves when supporting multiple versions of Perl. C<Devel::PPPort> generates a C header file F<ppport.h> that can also be run as a Perl script. To generate F<ppport.h>, run: perl -MDevel::PPPort -eDevel::PPPort::WriteFile Besides checking existing XS code, the script can also be used to retrieve compatibility information for various API calls using the C<--api-info> command line switch. For example: % perl ppport.h --api-info=sv_magicext For details, see C<perldoc ppport.h>. =head1 Unicode Support Perl 5.6.0 introduced Unicode support. It's important for porters and XS writers to understand this support and make sure that the code they write does not corrupt Unicode data. =head2 What B<is> Unicode, anyway? In the olden, less enlightened times, we all used to use ASCII. Most of us did, anyway. The big problem with ASCII is that it's American. Well, no, that's not actually the problem; the problem is that it's not particularly useful for people who don't use the Roman alphabet. What used to happen was that particular languages would stick their own alphabet in the upper range of the sequence, between 128 and 255. Of course, we then ended up with plenty of variants that weren't quite ASCII, and the whole point of it being a standard was lost. Worse still, if you've got a language like Chinese or Japanese that has hundreds or thousands of characters, then you really can't fit them into a mere 256, so they had to forget about ASCII altogether, and build their own systems using pairs of numbers to refer to one character. To fix this, some people formed Unicode, Inc. and produced a new character set containing all the characters you can possibly think of and more. There are several ways of representing these characters, and the one Perl uses is called UTF-8. UTF-8 uses a variable number of bytes to represent a character. You can learn more about Unicode and Perl's Unicode model in L<perlunicode>. (On EBCDIC platforms, Perl uses instead UTF-EBCDIC, which is a form of UTF-8 adapted for EBCDIC platforms. Below, we just talk about UTF-8. UTF-EBCDIC is like UTF-8, but the details are different. The macros hide the differences from you, just remember that the particular numbers and bit patterns presented below will differ in UTF-EBCDIC.) =head2 How can I recognise a UTF-8 string? You can't. This is because UTF-8 data is stored in bytes just like non-UTF-8 data. The Unicode character 200, (C<0xC8> for you hex types) capital E with a grave accent, is represented by the two bytes C<v196.172>. Unfortunately, the non-Unicode string C<chr(196).chr(172)> has that byte sequence as well. So you can't tell just by looking -- this is what makes Unicode input an interesting problem. In general, you either have to know what you're dealing with, or you have to guess. The API function C<is_utf8_string> can help; it'll tell you if a string contains only valid UTF-8 characters, and the chances of a non-UTF-8 string looking like valid UTF-8 become very small very quickly with increasing string length. On a character-by-character basis, C<isUTF8_CHAR> will tell you whether the current character in a string is valid UTF-8. =head2 How does UTF-8 represent Unicode characters? As mentioned above, UTF-8 uses a variable number of bytes to store a character. Characters with values 0...127 are stored in one byte, just like good ol' ASCII. Character 128 is stored as C<v194.128>; this continues up to character 191, which is C<v194.191>. Now we've run out of bits (191 is binary C<10111111>) so we move on; character 192 is C<v195.128>. And so it goes on, moving to three bytes at character 2048. L<perlunicode/Unicode Encodings> has pictures of how this works. Assuming you know you're dealing with a UTF-8 string, you can find out how long the first character in it is with the C<UTF8SKIP> macro: char *utf = "\305\233\340\240\201"; I32 len; len = UTF8SKIP(utf); /* len is 2 here */ utf += len; len = UTF8SKIP(utf); /* len is 3 here */ Another way to skip over characters in a UTF-8 string is to use C<utf8_hop>, which takes a string and a number of characters to skip over. You're on your own about bounds checking, though, so don't use it lightly. All bytes in a multi-byte UTF-8 character will have the high bit set, so you can test if you need to do something special with this character like this (the C<UTF8_IS_INVARIANT()> is a macro that tests whether the byte is encoded as a single byte even in UTF-8): U8 *utf; /* Initialize this to point to the beginning of the sequence to convert */ U8 *utf_end; /* Initialize this to 1 beyond the end of the sequence pointed to by 'utf' */ UV uv; /* Returned code point; note: a UV, not a U8, not a char */ STRLEN len; /* Returned length of character in bytes */ if (!UTF8_IS_INVARIANT(*utf)) /* Must treat this as UTF-8 */ uv = utf8_to_uvchr_buf(utf, utf_end, &len); else /* OK to treat this character as a byte */ uv = *utf; You can also see in that example that we use C<utf8_to_uvchr_buf> to get the value of the character; the inverse function C<uvchr_to_utf8> is available for putting a UV into UTF-8: if (!UVCHR_IS_INVARIANT(uv)) /* Must treat this as UTF8 */ utf8 = uvchr_to_utf8(utf8, uv); else /* OK to treat this character as a byte */ *utf8++ = uv; You B<must> convert characters to UVs using the above functions if you're ever in a situation where you have to match UTF-8 and non-UTF-8 characters. You may not skip over UTF-8 characters in this case. If you do this, you'll lose the ability to match hi-bit non-UTF-8 characters; for instance, if your UTF-8 string contains C<v196.172>, and you skip that character, you can never match a C<chr(200)> in a non-UTF-8 string. So don't do that! (Note that we don't have to test for invariant characters in the examples above. The functions work on any well-formed UTF-8 input. It's just that its faster to avoid the function overhead when it's not needed.) =head2 How does Perl store UTF-8 strings? Currently, Perl deals with UTF-8 strings and non-UTF-8 strings slightly differently. A flag in the SV, C<SVf_UTF8>, indicates that the string is internally encoded as UTF-8. Without it, the byte value is the codepoint number and vice versa. This flag is only meaningful if the SV is C<SvPOK> or immediately after stringification via C<SvPV> or a similar macro. You can check and manipulate this flag with the following macros: SvUTF8(sv) SvUTF8_on(sv) SvUTF8_off(sv) This flag has an important effect on Perl's treatment of the string: if UTF-8 data is not properly distinguished, regular expressions, C<length>, C<substr> and other string handling operations will have undesirable (wrong) results. The problem comes when you have, for instance, a string that isn't flagged as UTF-8, and contains a byte sequence that could be UTF-8 -- especially when combining non-UTF-8 and UTF-8 strings. Never forget that the C<SVf_UTF8> flag is separate from the PV value; you need to be sure you don't accidentally knock it off while you're manipulating SVs. More specifically, you cannot expect to do this: SV *sv; SV *nsv; STRLEN len; char *p; p = SvPV(sv, len); frobnicate(p); nsv = newSVpvn(p, len); The C<char*> string does not tell you the whole story, and you can't copy or reconstruct an SV just by copying the string value. Check if the old SV has the UTF8 flag set (I<after> the C<SvPV> call), and act accordingly: p = SvPV(sv, len); is_utf8 = SvUTF8(sv); frobnicate(p, is_utf8); nsv = newSVpvn(p, len); if (is_utf8) SvUTF8_on(nsv); In the above, your C<frobnicate> function has been changed to be made aware of whether or not it's dealing with UTF-8 data, so that it can handle the string appropriately. Since just passing an SV to an XS function and copying the data of the SV is not enough to copy the UTF8 flags, even less right is just passing a S<C<char *>> to an XS function. For full generality, use the L<C<DO_UTF8>|perlapi/DO_UTF8> macro to see if the string in an SV is to be I<treated> as UTF-8. This takes into account if the call to the XS function is being made from within the scope of L<S<C<use bytes>>|bytes>. If so, the underlying bytes that comprise the UTF-8 string are to be exposed, rather than the character they represent. But this pragma should only really be used for debugging and perhaps low-level testing at the byte level. Hence most XS code need not concern itself with this, but various areas of the perl core do need to support it. And this isn't the whole story. Starting in Perl v5.12, strings that aren't encoded in UTF-8 may also be treated as Unicode under various conditions (see L<perlunicode/ASCII Rules versus Unicode Rules>). This is only really a problem for characters whose ordinals are between 128 and 255, and their behavior varies under ASCII versus Unicode rules in ways that your code cares about (see L<perlunicode/The "Unicode Bug">). There is no published API for dealing with this, as it is subject to change, but you can look at the code for C<pp_lc> in F<pp.c> for an example as to how it's currently done. =head2 How do I convert a string to UTF-8? If you're mixing UTF-8 and non-UTF-8 strings, it is necessary to upgrade the non-UTF-8 strings to UTF-8. If you've got an SV, the easiest way to do this is: sv_utf8_upgrade(sv); However, you must not do this, for example: if (!SvUTF8(left)) sv_utf8_upgrade(left); If you do this in a binary operator, you will actually change one of the strings that came into the operator, and, while it shouldn't be noticeable by the end user, it can cause problems in deficient code. Instead, C<bytes_to_utf8> will give you a UTF-8-encoded B<copy> of its string argument. This is useful for having the data available for comparisons and so on, without harming the original SV. There's also C<utf8_to_bytes> to go the other way, but naturally, this will fail if the string contains any characters above 255 that can't be represented in a single byte. =head2 How do I compare strings? L<perlapi/sv_cmp> and L<perlapi/sv_cmp_flags> do a lexigraphic comparison of two SV's, and handle UTF-8ness properly. Note, however, that Unicode specifies a much fancier mechanism for collation, available via the L<Unicode::Collate> module. To just compare two strings for equality/non-equality, you can just use L<C<memEQ()>|perlapi/memEQ> and L<C<memNE()>|perlapi/memEQ> as usual, except the strings must be both UTF-8 or not UTF-8 encoded. To compare two strings case-insensitively, use L<C<foldEQ_utf8()>|perlapi/foldEQ_utf8> (the strings don't have to have the same UTF-8ness). =head2 Is there anything else I need to know? Not really. Just remember these things: =over 3 =item * There's no way to tell if a S<C<char *>> or S<C<U8 *>> string is UTF-8 or not. But you can tell if an SV is to be treated as UTF-8 by calling C<DO_UTF8> on it, after stringifying it with C<SvPV> or a similar macro. And, you can tell if SV is actually UTF-8 (even if it is not to be treated as such) by looking at its C<SvUTF8> flag (again after stringifying it). Don't forget to set the flag if something should be UTF-8. Treat the flag as part of the PV, even though it's not -- if you pass on the PV to somewhere, pass on the flag too. =item * If a string is UTF-8, B<always> use C<utf8_to_uvchr_buf> to get at the value, unless C<UTF8_IS_INVARIANT(*s)> in which case you can use C<*s>. =item * When writing a character UV to a UTF-8 string, B<always> use C<uvchr_to_utf8>, unless C<UVCHR_IS_INVARIANT(uv))> in which case you can use C<*s = uv>. =item * Mixing UTF-8 and non-UTF-8 strings is tricky. Use C<bytes_to_utf8> to get a new string which is UTF-8 encoded, and then combine them. =back =head1 Custom Operators Custom operator support is an experimental feature that allows you to define your own ops. This is primarily to allow the building of interpreters for other languages in the Perl core, but it also allows optimizations through the creation of "macro-ops" (ops which perform the functions of multiple ops which are usually executed together, such as C<gvsv, gvsv, add>.) This feature is implemented as a new op type, C<OP_CUSTOM>. The Perl core does not "know" anything special about this op type, and so it will not be involved in any optimizations. This also means that you can define your custom ops to be any op structure -- unary, binary, list and so on -- you like. It's important to know what custom operators won't do for you. They won't let you add new syntax to Perl, directly. They won't even let you add new keywords, directly. In fact, they won't change the way Perl compiles a program at all. You have to do those changes yourself, after Perl has compiled the program. You do this either by manipulating the op tree using a C<CHECK> block and the C<B::Generate> module, or by adding a custom peephole optimizer with the C<optimize> module. When you do this, you replace ordinary Perl ops with custom ops by creating ops with the type C<OP_CUSTOM> and the C<op_ppaddr> of your own PP function. This should be defined in XS code, and should look like the PP ops in C<pp_*.c>. You are responsible for ensuring that your op takes the appropriate number of values from the stack, and you are responsible for adding stack marks if necessary. You should also "register" your op with the Perl interpreter so that it can produce sensible error and warning messages. Since it is possible to have multiple custom ops within the one "logical" op type C<OP_CUSTOM>, Perl uses the value of C<< o->op_ppaddr >> to determine which custom op it is dealing with. You should create an C<XOP> structure for each ppaddr you use, set the properties of the custom op with C<XopENTRY_set>, and register the structure against the ppaddr using C<Perl_custom_op_register>. A trivial example might look like: static XOP my_xop; static OP *my_pp(pTHX); BOOT: XopENTRY_set(&my_xop, xop_name, "myxop"); XopENTRY_set(&my_xop, xop_desc, "Useless custom op"); Perl_custom_op_register(aTHX_ my_pp, &my_xop); The available fields in the structure are: =over 4 =item xop_name A short name for your op. This will be included in some error messages, and will also be returned as C<< $op->name >> by the L<B|B> module, so it will appear in the output of module like L<B::Concise|B::Concise>. =item xop_desc A short description of the function of the op. =item xop_class Which of the various C<*OP> structures this op uses. This should be one of the C<OA_*> constants from F<op.h>, namely =over 4 =item OA_BASEOP =item OA_UNOP =item OA_BINOP =item OA_LOGOP =item OA_LISTOP =item OA_PMOP =item OA_SVOP =item OA_PADOP =item OA_PVOP_OR_SVOP This should be interpreted as 'C<PVOP>' only. The C<_OR_SVOP> is because the only core C<PVOP>, C<OP_TRANS>, can sometimes be a C<SVOP> instead. =item OA_LOOP =item OA_COP =back The other C<OA_*> constants should not be used. =item xop_peep This member is of type C<Perl_cpeep_t>, which expands to C<void (*Perl_cpeep_t)(aTHX_ OP *o, OP *oldop)>. If it is set, this function will be called from C<Perl_rpeep> when ops of this type are encountered by the peephole optimizer. I<o> is the OP that needs optimizing; I<oldop> is the previous OP optimized, whose C<op_next> points to I<o>. =back C<B::Generate> directly supports the creation of custom ops by name. =head1 Stacks Descriptions above occasionally refer to "the stack", but there are in fact many stack-like data structures within the perl interpreter. When otherwise unqualified, "the stack" usually refers to the value stack. The various stacks have different purposes, and operate in slightly different ways. Their differences are noted below. =head2 Value Stack This stack stores the values that regular perl code is operating on, usually intermediate values of expressions within a statement. The stack itself is formed of an array of SV pointers. The base of this stack is pointed to by the interpreter variable C<PL_stack_base>, of type C<SV **>. The head of the stack is C<PL_stack_sp>, and points to the most recently-pushed item. Items are pushed to the stack by using the C<PUSHs()> macro or its variants described above; C<XPUSHs()>, C<mPUSHs()>, C<mXPUSHs()> and the typed versions. Note carefully that the non-C<X> versions of these macros do not check the size of the stack and assume it to be big enough. These must be paired with a suitable check of the stack's size, such as the C<EXTEND> macro to ensure it is large enough. For example EXTEND(SP, 4); mPUSHi(10); mPUSHi(20); mPUSHi(30); mPUSHi(40); This is slightly more performant than making four separate checks in four separate C<mXPUSHi()> calls. As a further performance optimisation, the various C<PUSH> macros all operate using a local variable C<SP>, rather than the interpreter-global variable C<PL_stack_sp>. This variable is declared by the C<dSP> macro - though it is normally implied by XSUBs and similar so it is rare you have to consider it directly. Once declared, the C<PUSH> macros will operate only on this local variable, so before invoking any other perl core functions you must use the C<PUTBACK> macro to return the value from the local C<SP> variable back to the interpreter variable. Similarly, after calling a perl core function which may have had reason to move the stack or push/pop values to it, you must use the C<SPAGAIN> macro which refreshes the local C<SP> value back from the interpreter one. Items are popped from the stack by using the C<POPs> macro or its typed versions, There is also a macro C<TOPs> that inspects the topmost item without removing it. Note specifically that SV pointers on the value stack do not contribute to the overall reference count of the xVs being referred to. If newly-created xVs are being pushed to the stack you must arrange for them to be destroyed at a suitable time; usually by using one of the C<mPUSH*> macros or C<sv_2mortal()> to mortalise the xV. =head2 Mark Stack The value stack stores individual perl scalar values as temporaries between expressions. Some perl expressions operate on entire lists; for that purpose we need to know where on the stack each list begins. This is the purpose of the mark stack. The mark stack stores integers as I32 values, which are the height of the value stack at the time before the list began; thus the mark itself actually points to the value stack entry one before the list. The list itself starts at C<mark + 1>. The base of this stack is pointed to by the interpreter variable C<PL_markstack>, of type C<I32 *>. The head of the stack is C<PL_markstack_ptr>, and points to the most recently-pushed item. Items are pushed to the stack by using the C<PUSHMARK()> macro. Even though the stack itself stores (value) stack indices as integers, the C<PUSHMARK> macro should be given a stack pointer directly; it will calculate the index offset by comparing to the C<PL_stack_sp> variable. Thus almost always the code to perform this is PUSHMARK(SP); Items are popped from the stack by the C<POPMARK> macro. There is also a macro C<TOPMARK> that inspects the topmost item without removing it. These macros return I32 index values directly. There is also the C<dMARK> macro which declares a new SV double-pointer variable, called C<mark>, which points at the marked stack slot; this is the usual macro that C code will use when operating on lists given on the stack. As noted above, the C<mark> variable itself will point at the most recently pushed value on the value stack before the list begins, and so the list itself starts at C<mark + 1>. The values of the list may be iterated by code such as for(SV **svp = mark + 1; svp <= PL_stack_sp; svp++) { SV *item = *svp; ... } Note specifically in the case that the list is already empty, C<mark> will equal C<PL_stack_sp>. Because the C<mark> variable is converted to a pointer on the value stack, extra care must be taken if C<EXTEND> or any of the C<XPUSH> macros are invoked within the function, because the stack may need to be moved to extend it and so the existing pointer will now be invalid. If this may be a problem, a possible solution is to track the mark offset as an integer and track the mark itself later on after the stack had been moved. I32 markoff = POPMARK; ... SP **mark = PL_stack_base + markoff; =head2 Temporaries Stack As noted above, xV references on the main value stack do not contribute to the reference count of an xV, and so another mechanism is used to track when temporary values which live on the stack must be released. This is the job of the temporaries stack. The temporaries stack stores pointers to xVs whose reference counts will be decremented soon. The base of this stack is pointed to by the interpreter variable C<PL_tmps_stack>, of type C<SV **>. The head of the stack is indexed by C<PL_tmps_ix>, an integer which stores the index in the array of the most recently-pushed item. There is no public API to directly push items to the temporaries stack. Instead, the API function C<sv_2mortal()> is used to mortalize an xV, adding its address to the temporaries stack. Likewise, there is no public API to read values from the temporaries stack. Instead. the macros C<SAVETMPS> and C<FREETPMS> are used. The C<SAVETMPS> macro establishes the base levels of the temporaries stack, by capturing the current value of C<PL_tmps_ix> into C<PL_tmps_floor> and saving the previous value to the save stack. Thereafter, whenever C<FREETMPS> is invoked all of the temporaries that have been pushed since that level are reclaimed. While it is common to see these two macros in pairs within an C<ENTER>/ C<LEAVE> pair, it is not necessary to match them. It is permitted to invoke C<FREETMPS> multiple times since the most recent C<SAVETMPS>; for example in a loop iterating over elements of a list. While you can invoke C<SAVETMPS> multiple times within a scope pair, it is unlikely to be useful. Subsequent invocations will move the temporaries floor further up, thus effectively trapping the existing temporaries to only be released at the end of the scope. =head2 Save Stack The save stack is used by perl to implement the C<local> keyword and other similar behaviours; any cleanup operations that need to be performed when leaving the current scope. Items pushed to this stack generally capture the current value of some internal variable or state, which will be restored when the scope is unwound due to leaving, C<return>, C<die>, C<goto> or other reasons. Whereas other perl internal stacks store individual items all of the same type (usually SV pointers or integers), the items pushed to the save stack are formed of many different types, having multiple fields to them. For example, the C<SAVEt_INT> type needs to store both the address of the C<int> variable to restore, and the value to restore it to. This information could have been stored using fields of a C<struct>, but would have to be large enough to store three pointers in the largest case, which would waste a lot of space in most of the smaller cases. Instead, the stack stores information in a variable-length encoding of C<ANY> structures. The final value pushed is stored in the C<UV> field which encodes the kind of item held by the preceeding items; the count and types of which will depend on what kind of item is being stored. The kind field is pushed last because that will be the first field to be popped when unwinding items from the stack. The base of this stack is pointed to by the interpreter variable C<PL_savestack>, of type C<ANY *>. The head of the stack is indexed by C<PL_savestack_ix>, an integer which stores the index in the array at which the next item should be pushed. (Note that this is different to most other stacks, which reference the most recently-pushed item). Items are pushed to the save stack by using the various C<SAVE...()> macros. Many of these macros take a variable and store both its address and current value on the save stack, ensuring that value gets restored on scope exit. SAVEI8(i8) SAVEI16(i16) SAVEI32(i32) SAVEINT(i) ... There are also a variety of other special-purpose macros which save particular types or values of interest. C<SAVETMPS> has already been mentioned above. Others include C<SAVEFREEPV> which arranges for a PV (i.e. a string buffer) to be freed, or C<SAVEDESTRUCTOR> which arranges for a given function pointer to be invoked on scope exit. A full list of such macros can be found in F<scope.h>. There is no public API for popping individual values or items from the save stack. Instead, via the scope stack, the C<ENTER> and C<LEAVE> pair form a way to start and stop nested scopes. Leaving a nested scope via C<LEAVE> will restore all of the saved values that had been pushed since the most recent C<ENTER>. =head2 Scope Stack As with the mark stack to the value stack, the scope stack forms a pair with the save stack. The scope stack stores the height of the save stack at which nested scopes begin, and allows the save stack to be unwound back to that point when the scope is left. When perl is built with debugging enabled, there is a second part to this stack storing human-readable string names describing the type of stack context. Each push operation saves the name as well as the height of the save stack, and each pop operation checks the topmost name with what is expected, causing an assertion failure if the name does not match. The base of this stack is pointed to by the interpreter variable C<PL_scopestack>, of type C<I32 *>. If enabled, the scope stack names are stored in a separate array pointed to by C<PL_scopestack_name>, of type C<const char **>. The head of the stack is indexed by C<PL_scopestack_ix>, an integer which stores the index of the array or arrays at which the next item should be pushed. (Note that this is different to most other stacks, which reference the most recently-pushed item). Values are pushed to the scope stack using the C<ENTER> macro, which begins a new nested scope. Any items pushed to the save stack are then restored at the next nested invocation of the C<LEAVE> macro. =head1 Dynamic Scope and the Context Stack B<Note:> this section describes a non-public internal API that is subject to change without notice. =head2 Introduction to the context stack In Perl, dynamic scoping refers to the runtime nesting of things like subroutine calls, evals etc, as well as the entering and exiting of block scopes. For example, the restoring of a C<local>ised variable is determined by the dynamic scope. Perl tracks the dynamic scope by a data structure called the context stack, which is an array of C<PERL_CONTEXT> structures, and which is itself a big union for all the types of context. Whenever a new scope is entered (such as a block, a C<for> loop, or a subroutine call), a new context entry is pushed onto the stack. Similarly when leaving a block or returning from a subroutine call etc. a context is popped. Since the context stack represents the current dynamic scope, it can be searched. For example, C<next LABEL> searches back through the stack looking for a loop context that matches the label; C<return> pops contexts until it finds a sub or eval context or similar; C<caller> examines sub contexts on the stack. Each context entry is labelled with a context type, C<cx_type>. Typical context types are C<CXt_SUB>, C<CXt_EVAL> etc., as well as C<CXt_BLOCK> and C<CXt_NULL> which represent a basic scope (as pushed by C<pp_enter>) and a sort block. The type determines which part of the context union are valid. The main division in the context struct is between a substitution scope (C<CXt_SUBST>) and block scopes, which are everything else. The former is just used while executing C<s///e>, and won't be discussed further here. All the block scope types share a common base, which corresponds to C<CXt_BLOCK>. This stores the old values of various scope-related variables like C<PL_curpm>, as well as information about the current scope, such as C<gimme>. On scope exit, the old variables are restored. Particular block scope types store extra per-type information. For example, C<CXt_SUB> stores the currently executing CV, while the various for loop types might hold the original loop variable SV. On scope exit, the per-type data is processed; for example the CV has its reference count decremented, and the original loop variable is restored. The macro C<cxstack> returns the base of the current context stack, while C<cxstack_ix> is the index of the current frame within that stack. In fact, the context stack is actually part of a stack-of-stacks system; whenever something unusual is done such as calling a C<DESTROY> or tie handler, a new stack is pushed, then popped at the end. Note that the API described here changed considerably in perl 5.24; prior to that, big macros like C<PUSHBLOCK> and C<POPSUB> were used; in 5.24 they were replaced by the inline static functions described below. In addition, the ordering and detail of how these macros/function work changed in many ways, often subtly. In particular they didn't handle saving the savestack and temps stack positions, and required additional C<ENTER>, C<SAVETMPS> and C<LEAVE> compared to the new functions. The old-style macros will not be described further. =head2 Pushing contexts For pushing a new context, the two basic functions are C<cx = cx_pushblock()>, which pushes a new basic context block and returns its address, and a family of similar functions with names like C<cx_pushsub(cx)> which populate the additional type-dependent fields in the C<cx> struct. Note that C<CXt_NULL> and C<CXt_BLOCK> don't have their own push functions, as they don't store any data beyond that pushed by C<cx_pushblock>. The fields of the context struct and the arguments to the C<cx_*> functions are subject to change between perl releases, representing whatever is convenient or efficient for that release. A typical context stack pushing can be found in C<pp_entersub>; the following shows a simplified and stripped-down example of a non-XS call, along with comments showing roughly what each function does. dMARK; U8 gimme = GIMME_V; bool hasargs = cBOOL(PL_op->op_flags & OPf_STACKED); OP *retop = PL_op->op_next; I32 old_ss_ix = PL_savestack_ix; CV *cv = ....; /* ... make mortal copies of stack args which are PADTMPs here ... */ /* ... do any additional savestack pushes here ... */ /* Now push a new context entry of type 'CXt_SUB'; initially just * doing the actions common to all block types: */ cx = cx_pushblock(CXt_SUB, gimme, MARK, old_ss_ix); /* this does (approximately): CXINC; /* cxstack_ix++ (grow if necessary) */ cx = CX_CUR(); /* and get the address of new frame */ cx->cx_type = CXt_SUB; cx->blk_gimme = gimme; cx->blk_oldsp = MARK - PL_stack_base; cx->blk_oldsaveix = old_ss_ix; cx->blk_oldcop = PL_curcop; cx->blk_oldmarksp = PL_markstack_ptr - PL_markstack; cx->blk_oldscopesp = PL_scopestack_ix; cx->blk_oldpm = PL_curpm; cx->blk_old_tmpsfloor = PL_tmps_floor; PL_tmps_floor = PL_tmps_ix; */ /* then update the new context frame with subroutine-specific info, * such as the CV about to be executed: */ cx_pushsub(cx, cv, retop, hasargs); /* this does (approximately): cx->blk_sub.cv = cv; cx->blk_sub.olddepth = CvDEPTH(cv); cx->blk_sub.prevcomppad = PL_comppad; cx->cx_type |= (hasargs) ? CXp_HASARGS : 0; cx->blk_sub.retop = retop; SvREFCNT_inc_simple_void_NN(cv); */ Note that C<cx_pushblock()> sets two new floors: for the args stack (to C<MARK>) and the temps stack (to C<PL_tmps_ix>). While executing at this scope level, every C<nextstate> (amongst others) will reset the args and tmps stack levels to these floors. Note that since C<cx_pushblock> uses the current value of C<PL_tmps_ix> rather than it being passed as an arg, this dictates at what point C<cx_pushblock> should be called. In particular, any new mortals which should be freed only on scope exit (rather than at the next C<nextstate>) should be created first. Most callers of C<cx_pushblock> simply set the new args stack floor to the top of the previous stack frame, but for C<CXt_LOOP_LIST> it stores the items being iterated over on the stack, and so sets C<blk_oldsp> to the top of these items instead. Note that, contrary to its name, C<blk_oldsp> doesn't always represent the value to restore C<PL_stack_sp> to on scope exit. Note the early capture of C<PL_savestack_ix> to C<old_ss_ix>, which is later passed as an arg to C<cx_pushblock>. In the case of C<pp_entersub>, this is because, although most values needing saving are stored in fields of the context struct, an extra value needs saving only when the debugger is running, and it doesn't make sense to bloat the struct for this rare case. So instead it is saved on the savestack. Since this value gets calculated and saved before the context is pushed, it is necessary to pass the old value of C<PL_savestack_ix> to C<cx_pushblock>, to ensure that the saved value gets freed during scope exit. For most users of C<cx_pushblock>, where nothing needs pushing on the save stack, C<PL_savestack_ix> is just passed directly as an arg to C<cx_pushblock>. Note that where possible, values should be saved in the context struct rather than on the save stack; it's much faster that way. Normally C<cx_pushblock> should be immediately followed by the appropriate C<cx_pushfoo>, with nothing between them; this is because if code in-between could die (e.g. a warning upgraded to fatal), then the context stack unwinding code in C<dounwind> would see (in the example above) a C<CXt_SUB> context frame, but without all the subroutine-specific fields set, and crashes would soon ensue. Where the two must be separate, initially set the type to C<CXt_NULL> or C<CXt_BLOCK>, and later change it to C<CXt_foo> when doing the C<cx_pushfoo>. This is exactly what C<pp_enteriter> does, once it's determined which type of loop it's pushing. =head2 Popping contexts Contexts are popped using C<cx_popsub()> etc. and C<cx_popblock()>. Note however, that unlike C<cx_pushblock>, neither of these functions actually decrement the current context stack index; this is done separately using C<CX_POP()>. There are two main ways that contexts are popped. During normal execution as scopes are exited, functions like C<pp_leave>, C<pp_leaveloop> and C<pp_leavesub> process and pop just one context using C<cx_popfoo> and C<cx_popblock>. On the other hand, things like C<pp_return> and C<next> may have to pop back several scopes until a sub or loop context is found, and exceptions (such as C<die>) need to pop back contexts until an eval context is found. Both of these are accomplished by C<dounwind()>, which is capable of processing and popping all contexts above the target one. Here is a typical example of context popping, as found in C<pp_leavesub> (simplified slightly): U8 gimme; PERL_CONTEXT *cx; SV **oldsp; OP *retop; cx = CX_CUR(); gimme = cx->blk_gimme; oldsp = PL_stack_base + cx->blk_oldsp; /* last arg of previous frame */ if (gimme == G_VOID) PL_stack_sp = oldsp; else leave_adjust_stacks(oldsp, oldsp, gimme, 0); CX_LEAVE_SCOPE(cx); cx_popsub(cx); cx_popblock(cx); retop = cx->blk_sub.retop; CX_POP(cx); return retop; The steps above are in a very specific order, designed to be the reverse order of when the context was pushed. The first thing to do is to copy and/or protect any return arguments and free any temps in the current scope. Scope exits like an rvalue sub normally return a mortal copy of their return args (as opposed to lvalue subs). It is important to make this copy before the save stack is popped or variables are restored, or bad things like the following can happen: sub f { my $x =...; $x } # $x freed before we get to copy it sub f { /(...)/; $1 } # PL_curpm restored before $1 copied Although we wish to free any temps at the same time, we have to be careful not to free any temps which are keeping return args alive; nor to free the temps we have just created while mortal copying return args. Fortunately, C<leave_adjust_stacks()> is capable of making mortal copies of return args, shifting args down the stack, and only processing those entries on the temps stack that are safe to do so. In void context no args are returned, so it's more efficient to skip calling C<leave_adjust_stacks()>. Also in void context, a C<nextstate> op is likely to be imminently called which will do a C<FREETMPS>, so there's no need to do that either. The next step is to pop savestack entries: C<CX_LEAVE_SCOPE(cx)> is just defined as C<< LEAVE_SCOPE(cx->blk_oldsaveix) >>. Note that during the popping, it's possible for perl to call destructors, call C<STORE> to undo localisations of tied vars, and so on. Any of these can die or call C<exit()>. In this case, C<dounwind()> will be called, and the current context stack frame will be re-processed. Thus it is vital that all steps in popping a context are done in such a way to support reentrancy. The other alternative, of decrementing C<cxstack_ix> I<before> processing the frame, would lead to leaks and the like if something died halfway through, or overwriting of the current frame. C<CX_LEAVE_SCOPE> itself is safely re-entrant: if only half the savestack items have been popped before dying and getting trapped by eval, then the C<CX_LEAVE_SCOPE>s in C<dounwind> or C<pp_leaveeval> will continue where the first one left off. The next step is the type-specific context processing; in this case C<cx_popsub>. In part, this looks like: cv = cx->blk_sub.cv; CvDEPTH(cv) = cx->blk_sub.olddepth; cx->blk_sub.cv = NULL; SvREFCNT_dec(cv); where its processing the just-executed CV. Note that before it decrements the CV's reference count, it nulls the C<blk_sub.cv>. This means that if it re-enters, the CV won't be freed twice. It also means that you can't rely on such type-specific fields having useful values after the return from C<cx_popfoo>. Next, C<cx_popblock> restores all the various interpreter vars to their previous values or previous high water marks; it expands to: PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp; PL_scopestack_ix = cx->blk_oldscopesp; PL_curpm = cx->blk_oldpm; PL_curcop = cx->blk_oldcop; PL_tmps_floor = cx->blk_old_tmpsfloor; Note that it I<doesn't> restore C<PL_stack_sp>; as mentioned earlier, which value to restore it to depends on the context type (specifically C<for (list) {}>), and what args (if any) it returns; and that will already have been sorted out earlier by C<leave_adjust_stacks()>. Finally, the context stack pointer is actually decremented by C<CX_POP(cx)>. After this point, it's possible that that the current context frame could be overwritten by other contexts being pushed. Although things like ties and C<DESTROY> are supposed to work within a new context stack, it's best not to assume this. Indeed on debugging builds, C<CX_POP(cx)> deliberately sets C<cx> to null to detect code that is still relying on the field values in that context frame. Note in the C<pp_leavesub()> example above, we grab C<blk_sub.retop> I<before> calling C<CX_POP>. =head2 Redoing contexts Finally, there is C<cx_topblock(cx)>, which acts like a super-C<nextstate> as regards to resetting various vars to their base values. It is used in places like C<pp_next>, C<pp_redo> and C<pp_goto> where rather than exiting a scope, we want to re-initialise the scope. As well as resetting C<PL_stack_sp> like C<nextstate>, it also resets C<PL_markstack_ptr>, C<PL_scopestack_ix> and C<PL_curpm>. Note that it doesn't do a C<FREETMPS>. =head1 Slab-based operator allocation B<Note:> this section describes a non-public internal API that is subject to change without notice. Perl's internal error-handling mechanisms implement C<die> (and its internal equivalents) using longjmp. If this occurs during lexing, parsing or compilation, we must ensure that any ops allocated as part of the compilation process are freed. (Older Perl versions did not adequately handle this situation: when failing a parse, they would leak ops that were stored in C C<auto> variables and not linked anywhere else.) To handle this situation, Perl uses I<op slabs> that are attached to the currently-compiling CV. A slab is a chunk of allocated memory. New ops are allocated as regions of the slab. If the slab fills up, a new one is created (and linked from the previous one). When an error occurs and the CV is freed, any ops remaining are freed. Each op is preceded by two pointers: one points to the next op in the slab, and the other points to the slab that owns it. The next-op pointer is needed so that Perl can iterate over a slab and free all its ops. (Op structures are of different sizes, so the slab's ops can't merely be treated as a dense array.) The slab pointer is needed for accessing a reference count on the slab: when the last op on a slab is freed, the slab itself is freed. The slab allocator puts the ops at the end of the slab first. This will tend to allocate the leaves of the op tree first, and the layout will therefore hopefully be cache-friendly. In addition, this means that there's no need to store the size of the slab (see below on why slabs vary in size), because Perl can follow pointers to find the last op. It might seem possible eliminate slab reference counts altogether, by having all ops implicitly attached to C<PL_compcv> when allocated and freed when the CV is freed. That would also allow C<op_free> to skip C<FreeOp> altogether, and thus free ops faster. But that doesn't work in those cases where ops need to survive beyond their CVs, such as re-evals. The CV also has to have a reference count on the slab. Sometimes the first op created is immediately freed. If the reference count of the slab reaches 0, then it will be freed with the CV still pointing to it. CVs use the C<CVf_SLABBED> flag to indicate that the CV has a reference count on the slab. When this flag is set, the slab is accessible via C<CvSTART> when C<CvROOT> is not set, or by subtracting two pointers C<(2*sizeof(I32 *))> from C<CvROOT> when it is set. The alternative to this approach of sneaking the slab into C<CvSTART> during compilation would be to enlarge the C<xpvcv> struct by another pointer. But that would make all CVs larger, even though slab-based op freeing is typically of benefit only for programs that make significant use of string eval. When the C<CVf_SLABBED> flag is set, the CV takes responsibility for freeing the slab. If C<CvROOT> is not set when the CV is freed or undeffed, it is assumed that a compilation error has occurred, so the op slab is traversed and all the ops are freed. Under normal circumstances, the CV forgets about its slab (decrementing the reference count) when the root is attached. So the slab reference counting that happens when ops are freed takes care of freeing the slab. In some cases, the CV is told to forget about the slab (C<cv_forget_slab>) precisely so that the ops can survive after the CV is done away with. Forgetting the slab when the root is attached is not strictly necessary, but avoids potential problems with C<CvROOT> being written over. There is code all over the place, both in core and on CPAN, that does things with C<CvROOT>, so forgetting the slab makes things more robust and avoids potential problems. Since the CV takes ownership of its slab when flagged, that flag is never copied when a CV is cloned, as one CV could free a slab that another CV still points to, since forced freeing of ops ignores the reference count (but asserts that it looks right). To avoid slab fragmentation, freed ops are marked as freed and attached to the slab's freed chain (an idea stolen from DBM::Deep). Those freed ops are reused when possible. Not reusing freed ops would be simpler, but it would result in significantly higher memory usage for programs with large C<if (DEBUG) {...}> blocks. C<SAVEFREEOP> is slightly problematic under this scheme. Sometimes it can cause an op to be freed after its CV. If the CV has forcibly freed the ops on its slab and the slab itself, then we will be fiddling with a freed slab. Making C<SAVEFREEOP> a no-op doesn't help, as sometimes an op can be savefreed when there is no compilation error, so the op would never be freed. It holds a reference count on the slab, so the whole slab would leak. So C<SAVEFREEOP> now sets a special flag on the op (C<< ->op_savefree >>). The forced freeing of ops after a compilation error won't free any ops thus marked. Since many pieces of code create tiny subroutines consisting of only a few ops, and since a huge slab would be quite a bit of baggage for those to carry around, the first slab is always very small. To avoid allocating too many slabs for a single CV, each subsequent slab is twice the size of the previous. Smartmatch expects to be able to allocate an op at run time, run it, and then throw it away. For that to work the op is simply malloced when PL_compcv hasn't been set up. So all slab-allocated ops are marked as such (C<< ->op_slabbed >>), to distinguish them from malloced ops. =head1 AUTHORS Until May 1997, this document was maintained by Jeff Okamoto E<lt>okamoto@corp.hp.comE<gt>. It is now maintained as part of Perl itself by the Perl 5 Porters E<lt>perl5-porters@perl.orgE<gt>. With lots of help and suggestions from Dean Roehrich, Malcolm Beattie, Andreas Koenig, Paul Hudson, Ilya Zakharevich, Paul Marquess, Neil Bowers, Matthew Green, Tim Bunce, Spider Boardman, Ulrich Pfeifer, Stephen McCamant, and Gurusamy Sarathy. =head1 SEE ALSO L<perlapi>, L<perlintern>, L<perlxs>, L<perlembed> perlreguts.pod 0000644 00000114605 15125556335 0007465 0 ustar 00 =head1 NAME perlreguts - Description of the Perl regular expression engine. =head1 DESCRIPTION This document is an attempt to shine some light on the guts of the regex engine and how it works. The regex engine represents a significant chunk of the perl codebase, but is relatively poorly understood. This document is a meagre attempt at addressing this situation. It is derived from the author's experience, comments in the source code, other papers on the regex engine, feedback on the perl5-porters mail list, and no doubt other places as well. B<NOTICE!> It should be clearly understood that the behavior and structures discussed in this represents the state of the engine as the author understood it at the time of writing. It is B<NOT> an API definition, it is purely an internals guide for those who want to hack the regex engine, or understand how the regex engine works. Readers of this document are expected to understand perl's regex syntax and its usage in detail. If you want to learn about the basics of Perl's regular expressions, see L<perlre>. And if you want to replace the regex engine with your own, see L<perlreapi>. =head1 OVERVIEW =head2 A quick note on terms There is some debate as to whether to say "regexp" or "regex". In this document we will use the term "regex" unless there is a special reason not to, in which case we will explain why. When speaking about regexes we need to distinguish between their source code form and their internal form. In this document we will use the term "pattern" when we speak of their textual, source code form, and the term "program" when we speak of their internal representation. These correspond to the terms I<S-regex> and I<B-regex> that Mark Jason Dominus employs in his paper on "Rx" ([1] in L</REFERENCES>). =head2 What is a regular expression engine? A regular expression engine is a program that takes a set of constraints specified in a mini-language, and then applies those constraints to a target string, and determines whether or not the string satisfies the constraints. See L<perlre> for a full definition of the language. In less grandiose terms, the first part of the job is to turn a pattern into something the computer can efficiently use to find the matching point in the string, and the second part is performing the search itself. To do this we need to produce a program by parsing the text. We then need to execute the program to find the point in the string that matches. And we need to do the whole thing efficiently. =head2 Structure of a Regexp Program =head3 High Level Although it is a bit confusing and some people object to the terminology, it is worth taking a look at a comment that has been in F<regexp.h> for years: I<This is essentially a linear encoding of a nondeterministic finite-state machine (aka syntax charts or "railroad normal form" in parsing technology).> The term "railroad normal form" is a bit esoteric, with "syntax diagram/charts", or "railroad diagram/charts" being more common terms. Nevertheless it provides a useful mental image of a regex program: each node can be thought of as a unit of track, with a single entry and in most cases a single exit point (there are pieces of track that fork, but statistically not many), and the whole forms a layout with a single entry and single exit point. The matching process can be thought of as a car that moves along the track, with the particular route through the system being determined by the character read at each possible connector point. A car can fall off the track at any point but it may only proceed as long as it matches the track. Thus the pattern C</foo(?:\w+|\d+|\s+)bar/> can be thought of as the following chart: [start] | <foo> | +-----+-----+ | | | <\w+> <\d+> <\s+> | | | +-----+-----+ | <bar> | [end] The truth of the matter is that perl's regular expressions these days are much more complex than this kind of structure, but visualising it this way can help when trying to get your bearings, and it matches the current implementation pretty closely. To be more precise, we will say that a regex program is an encoding of a graph. Each node in the graph corresponds to part of the original regex pattern, such as a literal string or a branch, and has a pointer to the nodes representing the next component to be matched. Since "node" and "opcode" already have other meanings in the perl source, we will call the nodes in a regex program "regops". The program is represented by an array of C<regnode> structures, one or more of which represent a single regop of the program. Struct C<regnode> is the smallest struct needed, and has a field structure which is shared with all the other larger structures. (Outside this document, the term "regnode" is sometimes used to mean "regop", which could be confusing.) The "next" pointers of all regops except C<BRANCH> implement concatenation; a "next" pointer with a C<BRANCH> on both ends of it is connecting two alternatives. [Here we have one of the subtle syntax dependencies: an individual C<BRANCH> (as opposed to a collection of them) is never concatenated with anything because of operator precedence.] The operand of some types of regop is a literal string; for others, it is a regop leading into a sub-program. In particular, the operand of a C<BRANCH> node is the first regop of the branch. B<NOTE>: As the railroad metaphor suggests, this is B<not> a tree structure: the tail of the branch connects to the thing following the set of C<BRANCH>es. It is a like a single line of railway track that splits as it goes into a station or railway yard and rejoins as it comes out the other side. =head3 Regops The base structure of a regop is defined in F<regexp.h> as follows: struct regnode { U8 flags; /* Various purposes, sometimes overridden */ U8 type; /* Opcode value as specified by regnodes.h */ U16 next_off; /* Offset in size regnode */ }; Other larger C<regnode>-like structures are defined in F<regcomp.h>. They are almost like subclasses in that they have the same fields as C<regnode>, with possibly additional fields following in the structure, and in some cases the specific meaning (and name) of some of base fields are overridden. The following is a more complete description. =over 4 =item C<regnode_1> =item C<regnode_2> C<regnode_1> structures have the same header, followed by a single four-byte argument; C<regnode_2> structures contain two two-byte arguments instead: regnode_1 U32 arg1; regnode_2 U16 arg1; U16 arg2; =item C<regnode_string> C<regnode_string> structures, used for literal strings, follow the header with a one-byte length and then the string data. Strings are padded on the tail end with zero bytes so that the total length of the node is a multiple of four bytes: regnode_string char string[1]; U8 str_len; /* overrides flags */ =item C<regnode_charclass> Bracketed character classes are represented by C<regnode_charclass> structures, which have a four-byte argument and then a 32-byte (256-bit) bitmap indicating which characters in the Latin1 range are included in the class. regnode_charclass U32 arg1; char bitmap[ANYOF_BITMAP_SIZE]; Various flags whose names begin with C<ANYOF_> are used for special situations. Above Latin1 matches and things not known until run-time are stored in L</Perl's pprivate structure>. =item C<regnode_charclass_posixl> There is also a larger form of a char class structure used to represent POSIX char classes under C</l> matching, called C<regnode_charclass_posixl> which has an additional 32-bit bitmap indicating which POSIX char classes have been included. regnode_charclass_posixl U32 arg1; char bitmap[ANYOF_BITMAP_SIZE]; U32 classflags; =back F<regnodes.h> defines an array called C<regarglen[]> which gives the size of each opcode in units of C<size regnode> (4-byte). A macro is used to calculate the size of an C<EXACT> node based on its C<str_len> field. The regops are defined in F<regnodes.h> which is generated from F<regcomp.sym> by F<regcomp.pl>. Currently the maximum possible number of distinct regops is restricted to 256, with about a quarter already used. A set of macros makes accessing the fields easier and more consistent. These include C<OP()>, which is used to determine the type of a C<regnode>-like structure; C<NEXT_OFF()>, which is the offset to the next node (more on this later); C<ARG()>, C<ARG1()>, C<ARG2()>, C<ARG_SET()>, and equivalents for reading and setting the arguments; and C<STR_LEN()>, C<STRING()> and C<OPERAND()> for manipulating strings and regop bearing types. =head3 What regop is next? There are three distinct concepts of "next" in the regex engine, and it is important to keep them clear. =over 4 =item * There is the "next regnode" from a given regnode, a value which is rarely useful except that sometimes it matches up in terms of value with one of the others, and that sometimes the code assumes this to always be so. =item * There is the "next regop" from a given regop/regnode. This is the regop physically located after the current one, as determined by the size of the current regop. This is often useful, such as when dumping the structure we use this order to traverse. Sometimes the code assumes that the "next regnode" is the same as the "next regop", or in other words assumes that the sizeof a given regop type is always going to be one regnode large. =item * There is the "regnext" from a given regop. This is the regop which is reached by jumping forward by the value of C<NEXT_OFF()>, or in a few cases for longer jumps by the C<arg1> field of the C<regnode_1> structure. The subroutine C<regnext()> handles this transparently. This is the logical successor of the node, which in some cases, like that of the C<BRANCH> regop, has special meaning. =back =head1 Process Overview Broadly speaking, performing a match of a string against a pattern involves the following steps: =over 5 =item A. Compilation =over 5 =item 1. Parsing =item 2. Peep-hole optimisation and analysis =back =item B. Execution =over 5 =item 3. Start position and no-match optimisations =item 4. Program execution =back =back Where these steps occur in the actual execution of a perl program is determined by whether the pattern involves interpolating any string variables. If interpolation occurs, then compilation happens at run time. If it does not, then compilation is performed at compile time. (The C</o> modifier changes this, as does C<qr//> to a certain extent.) The engine doesn't really care that much. =head2 Compilation This code resides primarily in F<regcomp.c>, along with the header files F<regcomp.h>, F<regexp.h> and F<regnodes.h>. Compilation starts with C<pregcomp()>, which is mostly an initialisation wrapper which farms work out to two other routines for the heavy lifting: the first is C<reg()>, which is the start point for parsing; the second, C<study_chunk()>, is responsible for optimisation. Initialisation in C<pregcomp()> mostly involves the creation and data-filling of a special structure, C<RExC_state_t> (defined in F<regcomp.c>). Almost all internally-used routines in F<regcomp.h> take a pointer to one of these structures as their first argument, with the name C<pRExC_state>. This structure is used to store the compilation state and contains many fields. Likewise there are many macros which operate on this variable: anything that looks like C<RExC_xxxx> is a macro that operates on this pointer/structure. C<reg()> is the start of the parse process. It is responsible for parsing an arbitrary chunk of pattern up to either the end of the string, or the first closing parenthesis it encounters in the pattern. This means it can be used to parse the top-level regex, or any section inside of a grouping parenthesis. It also handles the "special parens" that perl's regexes have. For instance when parsing C</x(?:foo)y/>, C<reg()> will at one point be called to parse from the "?" symbol up to and including the ")". Additionally, C<reg()> is responsible for parsing the one or more branches from the pattern, and for "finishing them off" by correctly setting their next pointers. In order to do the parsing, it repeatedly calls out to C<regbranch()>, which is responsible for handling up to the first C<|> symbol it sees. C<regbranch()> in turn calls C<regpiece()> which handles "things" followed by a quantifier. In order to parse the "things", C<regatom()> is called. This is the lowest level routine, which parses out constant strings, character classes, and the various special symbols like C<$>. If C<regatom()> encounters a "(" character it in turn calls C<reg()>. There used to be two main passes involved in parsing, the first to calculate the size of the compiled program, and the second to actually compile it. But now there is only one main pass, with an initial crude guess based on the length of the input pattern, which is increased if necessary as parsing proceeds, and afterwards, trimmed to the actual amount used. However, it may happen that parsing must be restarted at the beginning when various circumstances occur along the way. An example is if the program turns out to be so large that there are jumps in it that won't fit in the normal 16 bits available. There are two special regops that can hold bigger jump destinations, BRANCHJ and LONGBRANCH. The parse is restarted, and these are used instead of the normal shorter ones. Whenever restarting the parse is required, the function returns failure and sets a flag as to what needs to be done. This is passed up to the top level routine which takes the appropriate action and restarts from scratch. In the case of needing longer jumps, the C<RExC_use_BRANCHJ> flag is set in the C<RExC_state_t> structure, which the functions know to inspect before deciding how to do branches. In most instances, the function that discovers the issue sets the causal flag and returns failure immediately. L</Parsing complications> contains an explicit example of how this works. In other cases, such as a forward reference to a numbered parenthetical grouping, we need to finish the parse to know if that numbered grouping actually appears in the pattern. In those cases, the parse is just redone at the end, with the knowledge of how many groupings occur in it. The routine C<regtail()> is called by both C<reg()> and C<regbranch()> in order to "set the tail pointer" correctly. When executing and we get to the end of a branch, we need to go to the node following the grouping parens. When parsing, however, we don't know where the end will be until we get there, so when we do we must go back and update the offsets as appropriate. C<regtail> is used to make this easier. A subtlety of the parsing process means that a regex like C</foo/> is originally parsed into an alternation with a single branch. It is only afterwards that the optimiser converts single branch alternations into the simpler form. =head3 Parse Call Graph and a Grammar The call graph looks like this: reg() # parse a top level regex, or inside of # parens regbranch() # parse a single branch of an alternation regpiece() # parse a pattern followed by a quantifier regatom() # parse a simple pattern regclass() # used to handle a class reg() # used to handle a parenthesised # subpattern .... ... regtail() # finish off the branch ... regtail() # finish off the branch sequence. Tie each # branch's tail to the tail of the # sequence # (NEW) In Debug mode this is # regtail_study(). A grammar form might be something like this: atom : constant | class quant : '*' | '+' | '?' | '{min,max}' _branch: piece | piece _branch | nothing branch: _branch | _branch '|' branch group : '(' branch ')' _piece: atom | group piece : _piece | _piece quant =head3 Parsing complications The implication of the above description is that a pattern containing nested parentheses will result in a call graph which cycles through C<reg()>, C<regbranch()>, C<regpiece()>, C<regatom()>, C<reg()>, C<regbranch()> I<etc> multiple times, until the deepest level of nesting is reached. All the above routines return a pointer to a C<regnode>, which is usually the last regnode added to the program. However, one complication is that reg() returns NULL for parsing C<(?:)> syntax for embedded modifiers, setting the flag C<TRYAGAIN>. The C<TRYAGAIN> propagates upwards until it is captured, in some cases by C<regatom()>, but otherwise unconditionally by C<regbranch()>. Hence it will never be returned by C<regbranch()> to C<reg()>. This flag permits patterns such as C<(?i)+> to be detected as errors (I<Quantifier follows nothing in regex; marked by <-- HERE in m/(?i)+ <-- HERE />). Another complication is that the representation used for the program differs if it needs to store Unicode, but it's not always possible to know for sure whether it does until midway through parsing. The Unicode representation for the program is larger, and cannot be matched as efficiently. (See L</Unicode and Localisation Support> below for more details as to why.) If the pattern contains literal Unicode, it's obvious that the program needs to store Unicode. Otherwise, the parser optimistically assumes that the more efficient representation can be used, and starts sizing on this basis. However, if it then encounters something in the pattern which must be stored as Unicode, such as an C<\x{...}> escape sequence representing a character literal, then this means that all previously calculated sizes need to be redone, using values appropriate for the Unicode representation. This is another instance where the parsing needs to be restarted, and it can and is done immediately. The function returns failure, and sets the flag C<RESTART_UTF8> (encapsulated by using the macro C<REQUIRE_UTF8>). This restart request is propagated up the call chain in a similar fashion, until it is "caught" in C<Perl_re_op_compile()>, which marks the pattern as containing Unicode, and restarts the sizing pass. It is also possible for constructions within run-time code blocks to turn out to need Unicode representation., which is signalled by C<S_compile_runtime_code()> returning false to C<Perl_re_op_compile()>. The restart was previously implemented using a C<longjmp> in C<regatom()> back to a C<setjmp> in C<Perl_re_op_compile()>, but this proved to be problematic as the latter is a large function containing many automatic variables, which interact badly with the emergent control flow of C<setjmp>. =head3 Debug Output Starting in the 5.9.x development version of perl you can C<< use re Debug => 'PARSE' >> to see some trace information about the parse process. We will start with some simple patterns and build up to more complex patterns. So when we parse C</foo/> we see something like the following table. The left shows what is being parsed, and the number indicates where the next regop would go. The stuff on the right is the trace output of the graph. The names are chosen to be short to make it less dense on the screen. 'tsdy' is a special form of C<regtail()> which does some extra analysis. >foo< 1 reg brnc piec atom >< 4 tsdy~ EXACT <foo> (EXACT) (1) ~ attach to END (3) offset to 2 The resulting program then looks like: 1: EXACT <foo>(3) 3: END(0) As you can see, even though we parsed out a branch and a piece, it was ultimately only an atom. The final program shows us how things work. We have an C<EXACT> regop, followed by an C<END> regop. The number in parens indicates where the C<regnext> of the node goes. The C<regnext> of an C<END> regop is unused, as C<END> regops mean we have successfully matched. The number on the left indicates the position of the regop in the regnode array. Now let's try a harder pattern. We will add a quantifier, so now we have the pattern C</foo+/>. We will see that C<regbranch()> calls C<regpiece()> twice. >foo+< 1 reg brnc piec atom >o+< 3 piec atom >< 6 tail~ EXACT <fo> (1) 7 tsdy~ EXACT <fo> (EXACT) (1) ~ PLUS (END) (3) ~ attach to END (6) offset to 3 And we end up with the program: 1: EXACT <fo>(3) 3: PLUS(6) 4: EXACT <o>(0) 6: END(0) Now we have a special case. The C<EXACT> regop has a C<regnext> of 0. This is because if it matches it should try to match itself again. The C<PLUS> regop handles the actual failure of the C<EXACT> regop and acts appropriately (going to regnode 6 if the C<EXACT> matched at least once, or failing if it didn't). Now for something much more complex: C</x(?:foo*|b[a][rR])(foo|bar)$/> >x(?:foo*|b... 1 reg brnc piec atom >(?:foo*|b[... 3 piec atom >?:foo*|b[a... reg >foo*|b[a][... brnc piec atom >o*|b[a][rR... 5 piec atom >|b[a][rR])... 8 tail~ EXACT <fo> (3) >b[a][rR])(... 9 brnc 10 piec atom >[a][rR])(f... 12 piec atom >a][rR])(fo... clas >[rR])(foo|... 14 tail~ EXACT <b> (10) piec atom >rR])(foo|b... clas >)(foo|bar)... 25 tail~ EXACT <a> (12) tail~ BRANCH (3) 26 tsdy~ BRANCH (END) (9) ~ attach to TAIL (25) offset to 16 tsdy~ EXACT <fo> (EXACT) (4) ~ STAR (END) (6) ~ attach to TAIL (25) offset to 19 tsdy~ EXACT <b> (EXACT) (10) ~ EXACT <a> (EXACT) (12) ~ ANYOF[Rr] (END) (14) ~ attach to TAIL (25) offset to 11 >(foo|bar)$< tail~ EXACT <x> (1) piec atom >foo|bar)$< reg 28 brnc piec atom >|bar)$< 31 tail~ OPEN1 (26) >bar)$< brnc 32 piec atom >)$< 34 tail~ BRANCH (28) 36 tsdy~ BRANCH (END) (31) ~ attach to CLOSE1 (34) offset to 3 tsdy~ EXACT <foo> (EXACT) (29) ~ attach to CLOSE1 (34) offset to 5 tsdy~ EXACT <bar> (EXACT) (32) ~ attach to CLOSE1 (34) offset to 2 >$< tail~ BRANCH (3) ~ BRANCH (9) ~ TAIL (25) piec atom >< 37 tail~ OPEN1 (26) ~ BRANCH (28) ~ BRANCH (31) ~ CLOSE1 (34) 38 tsdy~ EXACT <x> (EXACT) (1) ~ BRANCH (END) (3) ~ BRANCH (END) (9) ~ TAIL (END) (25) ~ OPEN1 (END) (26) ~ BRANCH (END) (28) ~ BRANCH (END) (31) ~ CLOSE1 (END) (34) ~ EOL (END) (36) ~ attach to END (37) offset to 1 Resulting in the program 1: EXACT <x>(3) 3: BRANCH(9) 4: EXACT <fo>(6) 6: STAR(26) 7: EXACT <o>(0) 9: BRANCH(25) 10: EXACT <ba>(14) 12: OPTIMIZED (2 nodes) 14: ANYOF[Rr](26) 25: TAIL(26) 26: OPEN1(28) 28: TRIE-EXACT(34) [StS:1 Wds:2 Cs:6 Uq:5 #Sts:7 Mn:3 Mx:3 Stcls:bf] <foo> <bar> 30: OPTIMIZED (4 nodes) 34: CLOSE1(36) 36: EOL(37) 37: END(0) Here we can see a much more complex program, with various optimisations in play. At regnode 10 we see an example where a character class with only one character in it was turned into an C<EXACT> node. We can also see where an entire alternation was turned into a C<TRIE-EXACT> node. As a consequence, some of the regnodes have been marked as optimised away. We can see that the C<$> symbol has been converted into an C<EOL> regop, a special piece of code that looks for C<\n> or the end of the string. The next pointer for C<BRANCH>es is interesting in that it points at where execution should go if the branch fails. When executing, if the engine tries to traverse from a branch to a C<regnext> that isn't a branch then the engine will know that the entire set of branches has failed. =head3 Peep-hole Optimisation and Analysis The regular expression engine can be a weighty tool to wield. On long strings and complex patterns it can end up having to do a lot of work to find a match, and even more to decide that no match is possible. Consider a situation like the following pattern. 'ababababababababababab' =~ /(a|b)*z/ The C<(a|b)*> part can match at every char in the string, and then fail every time because there is no C<z> in the string. So obviously we can avoid using the regex engine unless there is a C<z> in the string. Likewise in a pattern like: /foo(\w+)bar/ In this case we know that the string must contain a C<foo> which must be followed by C<bar>. We can use Fast Boyer-Moore matching as implemented in C<fbm_instr()> to find the location of these strings. If they don't exist then we don't need to resort to the much more expensive regex engine. Even better, if they do exist then we can use their positions to reduce the search space that the regex engine needs to cover to determine if the entire pattern matches. There are various aspects of the pattern that can be used to facilitate optimisations along these lines: =over 5 =item * anchored fixed strings =item * floating fixed strings =item * minimum and maximum length requirements =item * start class =item * Beginning/End of line positions =back Another form of optimisation that can occur is the post-parse "peep-hole" optimisation, where inefficient constructs are replaced by more efficient constructs. The C<TAIL> regops which are used during parsing to mark the end of branches and the end of groups are examples of this. These regops are used as place-holders during construction and "always match" so they can be "optimised away" by making the things that point to the C<TAIL> point to the thing that C<TAIL> points to, thus "skipping" the node. Another optimisation that can occur is that of "C<EXACT> merging" which is where two consecutive C<EXACT> nodes are merged into a single regop. An even more aggressive form of this is that a branch sequence of the form C<EXACT BRANCH ... EXACT> can be converted into a C<TRIE-EXACT> regop. All of this occurs in the routine C<study_chunk()> which uses a special structure C<scan_data_t> to store the analysis that it has performed, and does the "peep-hole" optimisations as it goes. The code involved in C<study_chunk()> is extremely cryptic. Be careful. :-) =head2 Execution Execution of a regex generally involves two phases, the first being finding the start point in the string where we should match from, and the second being running the regop interpreter. If we can tell that there is no valid start point then we don't bother running the interpreter at all. Likewise, if we know from the analysis phase that we cannot detect a short-cut to the start position, we go straight to the interpreter. The two entry points are C<re_intuit_start()> and C<pregexec()>. These routines have a somewhat incestuous relationship with overlap between their functions, and C<pregexec()> may even call C<re_intuit_start()> on its own. Nevertheless other parts of the perl source code may call into either, or both. Execution of the interpreter itself used to be recursive, but thanks to the efforts of Dave Mitchell in the 5.9.x development track, that has changed: now an internal stack is maintained on the heap and the routine is fully iterative. This can make it tricky as the code is quite conservative about what state it stores, with the result that two consecutive lines in the code can actually be running in totally different contexts due to the simulated recursion. =head3 Start position and no-match optimisations C<re_intuit_start()> is responsible for handling start points and no-match optimisations as determined by the results of the analysis done by C<study_chunk()> (and described in L</Peep-hole Optimisation and Analysis>). The basic structure of this routine is to try to find the start- and/or end-points of where the pattern could match, and to ensure that the string is long enough to match the pattern. It tries to use more efficient methods over less efficient methods and may involve considerable cross-checking of constraints to find the place in the string that matches. For instance it may try to determine that a given fixed string must be not only present but a certain number of chars before the end of the string, or whatever. It calls several other routines, such as C<fbm_instr()> which does Fast Boyer Moore matching and C<find_byclass()> which is responsible for finding the start using the first mandatory regop in the program. When the optimisation criteria have been satisfied, C<reg_try()> is called to perform the match. =head3 Program execution C<pregexec()> is the main entry point for running a regex. It contains support for initialising the regex interpreter's state, running C<re_intuit_start()> if needed, and running the interpreter on the string from various start positions as needed. When it is necessary to use the regex interpreter C<pregexec()> calls C<regtry()>. C<regtry()> is the entry point into the regex interpreter. It expects as arguments a pointer to a C<regmatch_info> structure and a pointer to a string. It returns an integer 1 for success and a 0 for failure. It is basically a set-up wrapper around C<regmatch()>. C<regmatch> is the main "recursive loop" of the interpreter. It is basically a giant switch statement that implements a state machine, where the possible states are the regops themselves, plus a number of additional intermediate and failure states. A few of the states are implemented as subroutines but the bulk are inline code. =head1 MISCELLANEOUS =head2 Unicode and Localisation Support When dealing with strings containing characters that cannot be represented using an eight-bit character set, perl uses an internal representation that is a permissive version of Unicode's UTF-8 encoding[2]. This uses single bytes to represent characters from the ASCII character set, and sequences of two or more bytes for all other characters. (See L<perlunitut> for more information about the relationship between UTF-8 and perl's encoding, utf8. The difference isn't important for this discussion.) No matter how you look at it, Unicode support is going to be a pain in a regex engine. Tricks that might be fine when you have 256 possible characters often won't scale to handle the size of the UTF-8 character set. Things you can take for granted with ASCII may not be true with Unicode. For instance, in ASCII, it is safe to assume that C<sizeof(char1) == sizeof(char2)>, but in UTF-8 it isn't. Unicode case folding is vastly more complex than the simple rules of ASCII, and even when not using Unicode but only localised single byte encodings, things can get tricky (for example, B<LATIN SMALL LETTER SHARP S> (U+00DF, E<szlig>) should match 'SS' in localised case-insensitive matching). Making things worse is that UTF-8 support was a later addition to the regex engine (as it was to perl) and this necessarily made things a lot more complicated. Obviously it is easier to design a regex engine with Unicode support in mind from the beginning than it is to retrofit it to one that wasn't. Nearly all regops that involve looking at the input string have two cases, one for UTF-8, and one not. In fact, it's often more complex than that, as the pattern may be UTF-8 as well. Care must be taken when making changes to make sure that you handle UTF-8 properly, both at compile time and at execution time, including when the string and pattern are mismatched. =head2 Base Structures The C<regexp> structure described in L<perlreapi> is common to all regex engines. Two of its fields are intended for the private use of the regex engine that compiled the pattern. These are the C<intflags> and pprivate members. The C<pprivate> is a void pointer to an arbitrary structure whose use and management is the responsibility of the compiling engine. perl will never modify either of these values. In the case of the stock engine the structure pointed to by C<pprivate> is called C<regexp_internal>. Its C<pprivate> and C<intflags> fields contain data specific to each engine. There are two structures used to store a compiled regular expression. One, the C<regexp> structure described in L<perlreapi> is populated by the engine currently being. used and some of its fields read by perl to implement things such as the stringification of C<qr//>. The other structure is pointed to by the C<regexp> struct's C<pprivate> and is in addition to C<intflags> in the same struct considered to be the property of the regex engine which compiled the regular expression; The regexp structure contains all the data that perl needs to be aware of to properly work with the regular expression. It includes data about optimisations that perl can use to determine if the regex engine should really be used, and various other control info that is needed to properly execute patterns in various contexts such as is the pattern anchored in some way, or what flags were used during the compile, or whether the program contains special constructs that perl needs to be aware of. In addition it contains two fields that are intended for the private use of the regex engine that compiled the pattern. These are the C<intflags> and pprivate members. The C<pprivate> is a void pointer to an arbitrary structure whose use and management is the responsibility of the compiling engine. perl will never modify either of these values. As mentioned earlier, in the case of the default engines, the C<pprivate> will be a pointer to a regexp_internal structure which holds the compiled program and any additional data that is private to the regex engine implementation. =head3 Perl's C<pprivate> structure The following structure is used as the C<pprivate> struct by perl's regex engine. Since it is specific to perl it is only of curiosity value to other engine implementations. typedef struct regexp_internal { U32 *offsets; /* offset annotations 20001228 MJD * data about mapping the program to * the string*/ regnode *regstclass; /* Optional startclass as identified or * constructed by the optimiser */ struct reg_data *data; /* Additional miscellaneous data used * by the program. Used to make it * easier to clone and free arbitrary * data that the regops need. Often the * ARG field of a regop is an index * into this structure */ regnode program[1]; /* Unwarranted chumminess with * compiler. */ } regexp_internal; =over 5 =item C<offsets> Offsets holds a mapping of offset in the C<program> to offset in the C<precomp> string. This is only used by ActiveState's visual regex debugger. =item C<regstclass> Special regop that is used by C<re_intuit_start()> to check if a pattern can match at a certain position. For instance if the regex engine knows that the pattern must start with a 'Z' then it can scan the string until it finds one and then launch the regex engine from there. The routine that handles this is called C<find_by_class()>. Sometimes this field points at a regop embedded in the program, and sometimes it points at an independent synthetic regop that has been constructed by the optimiser. =item C<data> This field points at a C<reg_data> structure, which is defined as follows struct reg_data { U32 count; U8 *what; void* data[1]; }; This structure is used for handling data structures that the regex engine needs to handle specially during a clone or free operation on the compiled product. Each element in the data array has a corresponding element in the what array. During compilation regops that need special structures stored will add an element to each array using the add_data() routine and then store the index in the regop. =item C<program> Compiled program. Inlined into the structure so the entire struct can be treated as a single blob. =back =head1 SEE ALSO L<perlreapi> L<perlre> L<perlunitut> =head1 AUTHOR by Yves Orton, 2006. With excerpts from Perl, and contributions and suggestions from Ronald J. Kimball, Dave Mitchell, Dominic Dunlop, Mark Jason Dominus, Stephen McCamant, and David Landgren. Now maintained by Perl 5 Porters. =head1 LICENCE Same terms as Perl. =head1 REFERENCES [1] L<https://perl.plover.com/Rx/paper/> [2] L<https://www.unicode.org/> =cut perlsyn.pod 0000644 00000130122 15125556335 0006755 0 ustar 00 =head1 NAME X<syntax> perlsyn - Perl syntax =head1 DESCRIPTION A Perl program consists of a sequence of declarations and statements which run from the top to the bottom. Loops, subroutines, and other control structures allow you to jump around within the code. Perl is a B<free-form> language: you can format and indent it however you like. Whitespace serves mostly to separate tokens, unlike languages like Python where it is an important part of the syntax, or Fortran where it is immaterial. Many of Perl's syntactic elements are B<optional>. Rather than requiring you to put parentheses around every function call and declare every variable, you can often leave such explicit elements off and Perl will figure out what you meant. This is known as B<Do What I Mean>, abbreviated B<DWIM>. It allows programmers to be B<lazy> and to code in a style with which they are comfortable. Perl B<borrows syntax> and concepts from many languages: awk, sed, C, Bourne Shell, Smalltalk, Lisp and even English. Other languages have borrowed syntax from Perl, particularly its regular expression extensions. So if you have programmed in another language you will see familiar pieces in Perl. They often work the same, but see L<perltrap> for information about how they differ. =head2 Declarations X<declaration> X<undef> X<undefined> X<uninitialized> The only things you need to declare in Perl are report formats and subroutines (and sometimes not even subroutines). A scalar variable holds the undefined value (C<undef>) until it has been assigned a defined value, which is anything other than C<undef>. When used as a number, C<undef> is treated as C<0>; when used as a string, it is treated as the empty string, C<"">; and when used as a reference that isn't being assigned to, it is treated as an error. If you enable warnings, you'll be notified of an uninitialized value whenever you treat C<undef> as a string or a number. Well, usually. Boolean contexts, such as: if ($a) {} are exempt from warnings (because they care about truth rather than definedness). Operators such as C<++>, C<-->, C<+=>, C<-=>, and C<.=>, that operate on undefined variables such as: undef $a; $a++; are also always exempt from such warnings. A declaration can be put anywhere a statement can, but has no effect on the execution of the primary sequence of statements: declarations all take effect at compile time. All declarations are typically put at the beginning or the end of the script. However, if you're using lexically-scoped private variables created with C<my()>, C<state()>, or C<our()>, you'll have to make sure your format or subroutine definition is within the same block scope as the my if you expect to be able to access those private variables. Declaring a subroutine allows a subroutine name to be used as if it were a list operator from that point forward in the program. You can declare a subroutine without defining it by saying C<sub name>, thus: X<subroutine, declaration> sub myname; $me = myname $0 or die "can't get myname"; A bare declaration like that declares the function to be a list operator, not a unary operator, so you have to be careful to use parentheses (or C<or> instead of C<||>.) The C<||> operator binds too tightly to use after list operators; it becomes part of the last element. You can always use parentheses around the list operators arguments to turn the list operator back into something that behaves more like a function call. Alternatively, you can use the prototype C<($)> to turn the subroutine into a unary operator: sub myname ($); $me = myname $0 || die "can't get myname"; That now parses as you'd expect, but you still ought to get in the habit of using parentheses in that situation. For more on prototypes, see L<perlsub>. Subroutines declarations can also be loaded up with the C<require> statement or both loaded and imported into your namespace with a C<use> statement. See L<perlmod> for details on this. A statement sequence may contain declarations of lexically-scoped variables, but apart from declaring a variable name, the declaration acts like an ordinary statement, and is elaborated within the sequence of statements as if it were an ordinary statement. That means it actually has both compile-time and run-time effects. =head2 Comments X<comment> X<#> Text from a C<"#"> character until the end of the line is a comment, and is ignored. Exceptions include C<"#"> inside a string or regular expression. =head2 Simple Statements X<statement> X<semicolon> X<expression> X<;> The only kind of simple statement is an expression evaluated for its side-effects. Every simple statement must be terminated with a semicolon, unless it is the final statement in a block, in which case the semicolon is optional. But put the semicolon in anyway if the block takes up more than one line, because you may eventually add another line. Note that there are operators like C<eval {}>, C<sub {}>, and C<do {}> that I<look> like compound statements, but aren't--they're just TERMs in an expression--and thus need an explicit termination when used as the last item in a statement. =head2 Statement Modifiers X<statement modifier> X<modifier> X<if> X<unless> X<while> X<until> X<when> X<foreach> X<for> Any simple statement may optionally be followed by a I<SINGLE> modifier, just before the terminating semicolon (or block ending). The possible modifiers are: if EXPR unless EXPR while EXPR until EXPR for LIST foreach LIST when EXPR The C<EXPR> following the modifier is referred to as the "condition". Its truth or falsehood determines how the modifier will behave. C<if> executes the statement once I<if> and only if the condition is true. C<unless> is the opposite, it executes the statement I<unless> the condition is true (that is, if the condition is false). See L<perldata/Scalar values> for definitions of true and false. print "Basset hounds got long ears" if length $ear >= 10; go_outside() and play() unless $is_raining; The C<for(each)> modifier is an iterator: it executes the statement once for each item in the LIST (with C<$_> aliased to each item in turn). There is no syntax to specify a C-style for loop or a lexically scoped iteration variable in this form. print "Hello $_!\n" for qw(world Dolly nurse); C<while> repeats the statement I<while> the condition is true. Postfix C<while> has the same magic treatment of some kinds of condition that prefix C<while> has. C<until> does the opposite, it repeats the statement I<until> the condition is true (or while the condition is false): # Both of these count from 0 to 10. print $i++ while $i <= 10; print $j++ until $j > 10; The C<while> and C<until> modifiers have the usual "C<while> loop" semantics (conditional evaluated first), except when applied to a C<do>-BLOCK (or to the Perl4 C<do>-SUBROUTINE statement), in which case the block executes once before the conditional is evaluated. This is so that you can write loops like: do { $line = <STDIN>; ... } until !defined($line) || $line eq ".\n" See L<perlfunc/do>. Note also that the loop control statements described later will I<NOT> work in this construct, because modifiers don't take loop labels. Sorry. You can always put another block inside of it (for C<next>/C<redo>) or around it (for C<last>) to do that sort of thing. X<next> X<last> X<redo> For C<next> or C<redo>, just double the braces: do {{ next if $x == $y; # do something here }} until $x++ > $z; For C<last>, you have to be more elaborate and put braces around it: X<last> { do { last if $x == $y**2; # do something here } while $x++ <= $z; } If you need both C<next> and C<last>, you have to do both and also use a loop label: LOOP: { do {{ next if $x == $y; last LOOP if $x == $y**2; # do something here }} until $x++ > $z; } B<NOTE:> The behaviour of a C<my>, C<state>, or C<our> modified with a statement modifier conditional or loop construct (for example, C<my $x if ...>) is B<undefined>. The value of the C<my> variable may be C<undef>, any previously assigned value, or possibly anything else. Don't rely on it. Future versions of perl might do something different from the version of perl you try it out on. Here be dragons. X<my> The C<when> modifier is an experimental feature that first appeared in Perl 5.14. To use it, you should include a C<use v5.14> declaration. (Technically, it requires only the C<switch> feature, but that aspect of it was not available before 5.14.) Operative only from within a C<foreach> loop or a C<given> block, it executes the statement only if the smartmatch C<< $_ ~~ I<EXPR> >> is true. If the statement executes, it is followed by a C<next> from inside a C<foreach> and C<break> from inside a C<given>. Under the current implementation, the C<foreach> loop can be anywhere within the C<when> modifier's dynamic scope, but must be within the C<given> block's lexical scope. This restriction may be relaxed in a future release. See L</"Switch Statements"> below. =head2 Compound Statements X<statement, compound> X<block> X<bracket, curly> X<curly bracket> X<brace> X<{> X<}> X<if> X<unless> X<given> X<while> X<until> X<foreach> X<for> X<continue> In Perl, a sequence of statements that defines a scope is called a block. Sometimes a block is delimited by the file containing it (in the case of a required file, or the program as a whole), and sometimes a block is delimited by the extent of a string (in the case of an eval). But generally, a block is delimited by curly brackets, also known as braces. We will call this syntactic construct a BLOCK. Because enclosing braces are also the syntax for hash reference constructor expressions (see L<perlref>), you may occasionally need to disambiguate by placing a C<;> immediately after an opening brace so that Perl realises the brace is the start of a block. You will more frequently need to disambiguate the other way, by placing a C<+> immediately before an opening brace to force it to be interpreted as a hash reference constructor expression. It is considered good style to use these disambiguating mechanisms liberally, not only when Perl would otherwise guess incorrectly. The following compound statements may be used to control flow: if (EXPR) BLOCK if (EXPR) BLOCK else BLOCK if (EXPR) BLOCK elsif (EXPR) BLOCK ... if (EXPR) BLOCK elsif (EXPR) BLOCK ... else BLOCK unless (EXPR) BLOCK unless (EXPR) BLOCK else BLOCK unless (EXPR) BLOCK elsif (EXPR) BLOCK ... unless (EXPR) BLOCK elsif (EXPR) BLOCK ... else BLOCK given (EXPR) BLOCK LABEL while (EXPR) BLOCK LABEL while (EXPR) BLOCK continue BLOCK LABEL until (EXPR) BLOCK LABEL until (EXPR) BLOCK continue BLOCK LABEL for (EXPR; EXPR; EXPR) BLOCK LABEL for VAR (LIST) BLOCK LABEL for VAR (LIST) BLOCK continue BLOCK LABEL foreach (EXPR; EXPR; EXPR) BLOCK LABEL foreach VAR (LIST) BLOCK LABEL foreach VAR (LIST) BLOCK continue BLOCK LABEL BLOCK LABEL BLOCK continue BLOCK PHASE BLOCK The experimental C<given> statement is I<not automatically enabled>; see L</"Switch Statements"> below for how to do so, and the attendant caveats. Unlike in C and Pascal, in Perl these are all defined in terms of BLOCKs, not statements. This means that the curly brackets are I<required>--no dangling statements allowed. If you want to write conditionals without curly brackets, there are several other ways to do it. The following all do the same thing: if (!open(FOO)) { die "Can't open $FOO: $!" } die "Can't open $FOO: $!" unless open(FOO); open(FOO) || die "Can't open $FOO: $!"; open(FOO) ? () : die "Can't open $FOO: $!"; # a bit exotic, that last one The C<if> statement is straightforward. Because BLOCKs are always bounded by curly brackets, there is never any ambiguity about which C<if> an C<else> goes with. If you use C<unless> in place of C<if>, the sense of the test is reversed. Like C<if>, C<unless> can be followed by C<else>. C<unless> can even be followed by one or more C<elsif> statements, though you may want to think twice before using that particular language construct, as everyone reading your code will have to think at least twice before they can understand what's going on. The C<while> statement executes the block as long as the expression is true. The C<until> statement executes the block as long as the expression is false. The LABEL is optional, and if present, consists of an identifier followed by a colon. The LABEL identifies the loop for the loop control statements C<next>, C<last>, and C<redo>. If the LABEL is omitted, the loop control statement refers to the innermost enclosing loop. This may include dynamically looking back your call-stack at run time to find the LABEL. Such desperate behavior triggers a warning if you use the C<use warnings> pragma or the B<-w> flag. If the condition expression of a C<while> statement is based on any of a group of iterative expression types then it gets some magic treatment. The affected iterative expression types are L<C<readline>|perlfunc/readline EXPR>, the L<C<< <FILEHANDLE> >>|perlop/"I/O Operators"> input operator, L<C<readdir>|perlfunc/readdir DIRHANDLE>, L<C<glob>|perlfunc/glob EXPR>, the L<C<< <PATTERN> >>|perlop/"I/O Operators"> globbing operator, and L<C<each>|perlfunc/each HASH>. If the condition expression is one of these expression types, then the value yielded by the iterative operator will be implicitly assigned to C<$_>. If the condition expression is one of these expression types or an explicit assignment of one of them to a scalar, then the condition actually tests for definedness of the expression's value, not for its regular truth value. If there is a C<continue> BLOCK, it is always executed just before the conditional is about to be evaluated again. Thus it can be used to increment a loop variable, even when the loop has been continued via the C<next> statement. When a block is preceded by a compilation phase keyword such as C<BEGIN>, C<END>, C<INIT>, C<CHECK>, or C<UNITCHECK>, then the block will run only during the corresponding phase of execution. See L<perlmod> for more details. Extension modules can also hook into the Perl parser to define new kinds of compound statements. These are introduced by a keyword which the extension recognizes, and the syntax following the keyword is defined entirely by the extension. If you are an implementor, see L<perlapi/PL_keyword_plugin> for the mechanism. If you are using such a module, see the module's documentation for details of the syntax that it defines. =head2 Loop Control X<loop control> X<loop, control> X<next> X<last> X<redo> X<continue> The C<next> command starts the next iteration of the loop: LINE: while (<STDIN>) { next LINE if /^#/; # discard comments ... } The C<last> command immediately exits the loop in question. The C<continue> block, if any, is not executed: LINE: while (<STDIN>) { last LINE if /^$/; # exit when done with header ... } The C<redo> command restarts the loop block without evaluating the conditional again. The C<continue> block, if any, is I<not> executed. This command is normally used by programs that want to lie to themselves about what was just input. For example, when processing a file like F</etc/termcap>. If your input lines might end in backslashes to indicate continuation, you want to skip ahead and get the next record. while (<>) { chomp; if (s/\\$//) { $_ .= <>; redo unless eof(); } # now process $_ } which is Perl shorthand for the more explicitly written version: LINE: while (defined($line = <ARGV>)) { chomp($line); if ($line =~ s/\\$//) { $line .= <ARGV>; redo LINE unless eof(); # not eof(ARGV)! } # now process $line } Note that if there were a C<continue> block on the above code, it would get executed only on lines discarded by the regex (since redo skips the continue block). A continue block is often used to reset line counters or C<m?pat?> one-time matches: # inspired by :1,$g/fred/s//WILMA/ while (<>) { m?(fred)? && s//WILMA $1 WILMA/; m?(barney)? && s//BETTY $1 BETTY/; m?(homer)? && s//MARGE $1 MARGE/; } continue { print "$ARGV $.: $_"; close ARGV if eof; # reset $. reset if eof; # reset ?pat? } If the word C<while> is replaced by the word C<until>, the sense of the test is reversed, but the conditional is still tested before the first iteration. Loop control statements don't work in an C<if> or C<unless>, since they aren't loops. You can double the braces to make them such, though. if (/pattern/) {{ last if /fred/; next if /barney/; # same effect as "last", # but doesn't document as well # do something here }} This is caused by the fact that a block by itself acts as a loop that executes once, see L</"Basic BLOCKs">. The form C<while/if BLOCK BLOCK>, available in Perl 4, is no longer available. Replace any occurrence of C<if BLOCK> by C<if (do BLOCK)>. =head2 For Loops X<for> X<foreach> Perl's C-style C<for> loop works like the corresponding C<while> loop; that means that this: for ($i = 1; $i < 10; $i++) { ... } is the same as this: $i = 1; while ($i < 10) { ... } continue { $i++; } There is one minor difference: if variables are declared with C<my> in the initialization section of the C<for>, the lexical scope of those variables is exactly the C<for> loop (the body of the loop and the control sections). X<my> As a special case, if the test in the C<for> loop (or the corresponding C<while> loop) is empty, it is treated as true. That is, both for (;;) { ... } and while () { ... } are treated as infinite loops. Besides the normal array index looping, C<for> can lend itself to many other interesting applications. Here's one that avoids the problem you get into if you explicitly test for end-of-file on an interactive file descriptor causing your program to appear to hang. X<eof> X<end-of-file> X<end of file> $on_a_tty = -t STDIN && -t STDOUT; sub prompt { print "yes? " if $on_a_tty } for ( prompt(); <STDIN>; prompt() ) { # do something } The condition expression of a C<for> loop gets the same magic treatment of C<readline> et al that the condition expression of a C<while> loop gets. =head2 Foreach Loops X<for> X<foreach> The C<foreach> loop iterates over a normal list value and sets the scalar variable VAR to be each element of the list in turn. If the variable is preceded with the keyword C<my>, then it is lexically scoped, and is therefore visible only within the loop. Otherwise, the variable is implicitly local to the loop and regains its former value upon exiting the loop. If the variable was previously declared with C<my>, it uses that variable instead of the global one, but it's still localized to the loop. This implicit localization occurs I<only> in a C<foreach> loop. X<my> X<local> The C<foreach> keyword is actually a synonym for the C<for> keyword, so you can use either. If VAR is omitted, C<$_> is set to each value. X<$_> If any element of LIST is an lvalue, you can modify it by modifying VAR inside the loop. Conversely, if any element of LIST is NOT an lvalue, any attempt to modify that element will fail. In other words, the C<foreach> loop index variable is an implicit alias for each item in the list that you're looping over. X<alias> If any part of LIST is an array, C<foreach> will get very confused if you add or remove elements within the loop body, for example with C<splice>. So don't do that. X<splice> C<foreach> probably won't do what you expect if VAR is a tied or other special variable. Don't do that either. As of Perl 5.22, there is an experimental variant of this loop that accepts a variable preceded by a backslash for VAR, in which case the items in the LIST must be references. The backslashed variable will become an alias to each referenced item in the LIST, which must be of the correct type. The variable needn't be a scalar in this case, and the backslash may be followed by C<my>. To use this form, you must enable the C<refaliasing> feature via C<use feature>. (See L<feature>. See also L<perlref/Assigning to References>.) Examples: for (@ary) { s/foo/bar/ } for my $elem (@elements) { $elem *= 2; } for $count (reverse(1..10), "BOOM") { print $count, "\n"; sleep(1); } for (1..15) { print "Merry Christmas\n"; } foreach $item (split(/:[\\\n:]*/, $ENV{TERMCAP})) { print "Item: $item\n"; } use feature "refaliasing"; no warnings "experimental::refaliasing"; foreach \my %hash (@array_of_hash_references) { # do something which each %hash } Here's how a C programmer might code up a particular algorithm in Perl: for (my $i = 0; $i < @ary1; $i++) { for (my $j = 0; $j < @ary2; $j++) { if ($ary1[$i] > $ary2[$j]) { last; # can't go to outer :-( } $ary1[$i] += $ary2[$j]; } # this is where that last takes me } Whereas here's how a Perl programmer more comfortable with the idiom might do it: OUTER: for my $wid (@ary1) { INNER: for my $jet (@ary2) { next OUTER if $wid > $jet; $wid += $jet; } } See how much easier this is? It's cleaner, safer, and faster. It's cleaner because it's less noisy. It's safer because if code gets added between the inner and outer loops later on, the new code won't be accidentally executed. The C<next> explicitly iterates the other loop rather than merely terminating the inner one. And it's faster because Perl executes a C<foreach> statement more rapidly than it would the equivalent C-style C<for> loop. Perceptive Perl hackers may have noticed that a C<for> loop has a return value, and that this value can be captured by wrapping the loop in a C<do> block. The reward for this discovery is this cautionary advice: The return value of a C<for> loop is unspecified and may change without notice. Do not rely on it. =head2 Basic BLOCKs X<block> A BLOCK by itself (labeled or not) is semantically equivalent to a loop that executes once. Thus you can use any of the loop control statements in it to leave or restart the block. (Note that this is I<NOT> true in C<eval{}>, C<sub{}>, or contrary to popular belief C<do{}> blocks, which do I<NOT> count as loops.) The C<continue> block is optional. The BLOCK construct can be used to emulate case structures. SWITCH: { if (/^abc/) { $abc = 1; last SWITCH; } if (/^def/) { $def = 1; last SWITCH; } if (/^xyz/) { $xyz = 1; last SWITCH; } $nothing = 1; } You'll also find that C<foreach> loop used to create a topicalizer and a switch: SWITCH: for ($var) { if (/^abc/) { $abc = 1; last SWITCH; } if (/^def/) { $def = 1; last SWITCH; } if (/^xyz/) { $xyz = 1; last SWITCH; } $nothing = 1; } Such constructs are quite frequently used, both because older versions of Perl had no official C<switch> statement, and also because the new version described immediately below remains experimental and can sometimes be confusing. =head2 Switch Statements X<switch> X<case> X<given> X<when> X<default> Starting from Perl 5.10.1 (well, 5.10.0, but it didn't work right), you can say use feature "switch"; to enable an experimental switch feature. This is loosely based on an old version of a Raku proposal, but it no longer resembles the Raku construct. You also get the switch feature whenever you declare that your code prefers to run under a version of Perl that is 5.10 or later. For example: use v5.14; Under the "switch" feature, Perl gains the experimental keywords C<given>, C<when>, C<default>, C<continue>, and C<break>. Starting from Perl 5.16, one can prefix the switch keywords with C<CORE::> to access the feature without a C<use feature> statement. The keywords C<given> and C<when> are analogous to C<switch> and C<case> in other languages -- though C<continue> is not -- so the code in the previous section could be rewritten as use v5.10.1; for ($var) { when (/^abc/) { $abc = 1 } when (/^def/) { $def = 1 } when (/^xyz/) { $xyz = 1 } default { $nothing = 1 } } The C<foreach> is the non-experimental way to set a topicalizer. If you wish to use the highly experimental C<given>, that could be written like this: use v5.10.1; given ($var) { when (/^abc/) { $abc = 1 } when (/^def/) { $def = 1 } when (/^xyz/) { $xyz = 1 } default { $nothing = 1 } } As of 5.14, that can also be written this way: use v5.14; for ($var) { $abc = 1 when /^abc/; $def = 1 when /^def/; $xyz = 1 when /^xyz/; default { $nothing = 1 } } Or if you don't care to play it safe, like this: use v5.14; given ($var) { $abc = 1 when /^abc/; $def = 1 when /^def/; $xyz = 1 when /^xyz/; default { $nothing = 1 } } The arguments to C<given> and C<when> are in scalar context, and C<given> assigns the C<$_> variable its topic value. Exactly what the I<EXPR> argument to C<when> does is hard to describe precisely, but in general, it tries to guess what you want done. Sometimes it is interpreted as C<< $_ ~~ I<EXPR> >>, and sometimes it is not. It also behaves differently when lexically enclosed by a C<given> block than it does when dynamically enclosed by a C<foreach> loop. The rules are far too difficult to understand to be described here. See L</"Experimental Details on given and when"> later on. Due to an unfortunate bug in how C<given> was implemented between Perl 5.10 and 5.16, under those implementations the version of C<$_> governed by C<given> is merely a lexically scoped copy of the original, not a dynamically scoped alias to the original, as it would be if it were a C<foreach> or under both the original and the current Raku language specification. This bug was fixed in Perl 5.18 (and lexicalized C<$_> itself was removed in Perl 5.24). If your code still needs to run on older versions, stick to C<foreach> for your topicalizer and you will be less unhappy. =head2 Goto X<goto> Although not for the faint of heart, Perl does support a C<goto> statement. There are three forms: C<goto>-LABEL, C<goto>-EXPR, and C<goto>-&NAME. A loop's LABEL is not actually a valid target for a C<goto>; it's just the name of the loop. The C<goto>-LABEL form finds the statement labeled with LABEL and resumes execution there. It may not be used to go into any construct that requires initialization, such as a subroutine or a C<foreach> loop. It also can't be used to go into a construct that is optimized away. It can be used to go almost anywhere else within the dynamic scope, including out of subroutines, but it's usually better to use some other construct such as C<last> or C<die>. The author of Perl has never felt the need to use this form of C<goto> (in Perl, that is--C is another matter). The C<goto>-EXPR form expects a label name, whose scope will be resolved dynamically. This allows for computed C<goto>s per FORTRAN, but isn't necessarily recommended if you're optimizing for maintainability: goto(("FOO", "BAR", "GLARCH")[$i]); The C<goto>-&NAME form is highly magical, and substitutes a call to the named subroutine for the currently running subroutine. This is used by C<AUTOLOAD()> subroutines that wish to load another subroutine and then pretend that the other subroutine had been called in the first place (except that any modifications to C<@_> in the current subroutine are propagated to the other subroutine.) After the C<goto>, not even C<caller()> will be able to tell that this routine was called first. In almost all cases like this, it's usually a far, far better idea to use the structured control flow mechanisms of C<next>, C<last>, or C<redo> instead of resorting to a C<goto>. For certain applications, the catch and throw pair of C<eval{}> and die() for exception processing can also be a prudent approach. =head2 The Ellipsis Statement X<...> X<... statement> X<ellipsis operator> X<elliptical statement> X<unimplemented statement> X<unimplemented operator> X<yada-yada> X<yada-yada operator> X<... operator> X<whatever operator> X<triple-dot operator> Beginning in Perl 5.12, Perl accepts an ellipsis, "C<...>", as a placeholder for code that you haven't implemented yet. When Perl 5.12 or later encounters an ellipsis statement, it parses this without error, but if and when you should actually try to execute it, Perl throws an exception with the text C<Unimplemented>: use v5.12; sub unimplemented { ... } eval { unimplemented() }; if ($@ =~ /^Unimplemented at /) { say "I found an ellipsis!"; } You can only use the elliptical statement to stand in for a complete statement. Syntactically, "C<...;>" is a complete statement, but, as with other kinds of semicolon-terminated statement, the semicolon may be omitted if "C<...>" appears immediately before a closing brace. These examples show how the ellipsis works: use v5.12; { ... } sub foo { ... } ...; eval { ... }; sub somemeth { my $self = shift; ...; } $x = do { my $n; ...; say "Hurrah!"; $n; }; The elliptical statement cannot stand in for an expression that is part of a larger statement. These examples of attempts to use an ellipsis are syntax errors: use v5.12; print ...; open(my $fh, ">", "/dev/passwd") or ...; if ($condition && ... ) { say "Howdy" }; ... if $a > $b; say "Cromulent" if ...; $flub = 5 + ...; There are some cases where Perl can't immediately tell the difference between an expression and a statement. For instance, the syntax for a block and an anonymous hash reference constructor look the same unless there's something in the braces to give Perl a hint. The ellipsis is a syntax error if Perl doesn't guess that the C<{ ... }> is a block. Inside your block, you can use a C<;> before the ellipsis to denote that the C<{ ... }> is a block and not a hash reference constructor. Note: Some folks colloquially refer to this bit of punctuation as a "yada-yada" or "triple-dot", but its true name is actually an ellipsis. =head2 PODs: Embedded Documentation X<POD> X<documentation> Perl has a mechanism for intermixing documentation with source code. While it's expecting the beginning of a new statement, if the compiler encounters a line that begins with an equal sign and a word, like this =head1 Here There Be Pods! Then that text and all remaining text up through and including a line beginning with C<=cut> will be ignored. The format of the intervening text is described in L<perlpod>. This allows you to intermix your source code and your documentation text freely, as in =item snazzle($) The snazzle() function will behave in the most spectacular form that you can possibly imagine, not even excepting cybernetic pyrotechnics. =cut back to the compiler, nuff of this pod stuff! sub snazzle($) { my $thingie = shift; ......... } Note that pod translators should look at only paragraphs beginning with a pod directive (it makes parsing easier), whereas the compiler actually knows to look for pod escapes even in the middle of a paragraph. This means that the following secret stuff will be ignored by both the compiler and the translators. $a=3; =secret stuff warn "Neither POD nor CODE!?" =cut back print "got $a\n"; You probably shouldn't rely upon the C<warn()> being podded out forever. Not all pod translators are well-behaved in this regard, and perhaps the compiler will become pickier. One may also use pod directives to quickly comment out a section of code. =head2 Plain Old Comments (Not!) X<comment> X<line> X<#> X<preprocessor> X<eval> Perl can process line directives, much like the C preprocessor. Using this, one can control Perl's idea of filenames and line numbers in error or warning messages (especially for strings that are processed with C<eval()>). The syntax for this mechanism is almost the same as for most C preprocessors: it matches the regular expression # example: '# line 42 "new_filename.plx"' /^\# \s* line \s+ (\d+) \s* (?:\s("?)([^"]+)\g2)? \s* $/x with C<$1> being the line number for the next line, and C<$3> being the optional filename (specified with or without quotes). Note that no whitespace may precede the C<< # >>, unlike modern C preprocessors. There is a fairly obvious gotcha included with the line directive: Debuggers and profilers will only show the last source line to appear at a particular line number in a given file. Care should be taken not to cause line number collisions in code you'd like to debug later. Here are some examples that you should be able to type into your command shell: % perl # line 200 "bzzzt" # the '#' on the previous line must be the first char on line die 'foo'; __END__ foo at bzzzt line 201. % perl # line 200 "bzzzt" eval qq[\n#line 2001 ""\ndie 'foo']; print $@; __END__ foo at - line 2001. % perl eval qq[\n#line 200 "foo bar"\ndie 'foo']; print $@; __END__ foo at foo bar line 200. % perl # line 345 "goop" eval "\n#line " . __LINE__ . ' "' . __FILE__ ."\"\ndie 'foo'"; print $@; __END__ foo at goop line 345. =head2 Experimental Details on given and when As previously mentioned, the "switch" feature is considered highly experimental; it is subject to change with little notice. In particular, C<when> has tricky behaviours that are expected to change to become less tricky in the future. Do not rely upon its current (mis)implementation. Before Perl 5.18, C<given> also had tricky behaviours that you should still beware of if your code must run on older versions of Perl. Here is a longer example of C<given>: use feature ":5.10"; given ($foo) { when (undef) { say '$foo is undefined'; } when ("foo") { say '$foo is the string "foo"'; } when ([1,3,5,7,9]) { say '$foo is an odd digit'; continue; # Fall through } when ($_ < 100) { say '$foo is numerically less than 100'; } when (\&complicated_check) { say 'a complicated check for $foo is true'; } default { die q(I don't know what to do with $foo); } } Before Perl 5.18, C<given(EXPR)> assigned the value of I<EXPR> to merely a lexically scoped I<B<copy>> (!) of C<$_>, not a dynamically scoped alias the way C<foreach> does. That made it similar to do { my $_ = EXPR; ... } except that the block was automatically broken out of by a successful C<when> or an explicit C<break>. Because it was only a copy, and because it was only lexically scoped, not dynamically scoped, you could not do the things with it that you are used to in a C<foreach> loop. In particular, it did not work for arbitrary function calls if those functions might try to access $_. Best stick to C<foreach> for that. Most of the power comes from the implicit smartmatching that can sometimes apply. Most of the time, C<when(EXPR)> is treated as an implicit smartmatch of C<$_>, that is, C<$_ ~~ EXPR>. (See L<perlop/"Smartmatch Operator"> for more information on smartmatching.) But when I<EXPR> is one of the 10 exceptional cases (or things like them) listed below, it is used directly as a boolean. =over 4 =item Z<>1. A user-defined subroutine call or a method invocation. =item Z<>2. A regular expression match in the form of C</REGEX/>, C<$foo =~ /REGEX/>, or C<$foo =~ EXPR>. Also, a negated regular expression match in the form C<!/REGEX/>, C<$foo !~ /REGEX/>, or C<$foo !~ EXPR>. =item Z<>3. A smart match that uses an explicit C<~~> operator, such as C<EXPR ~~ EXPR>. B<NOTE:> You will often have to use C<$c ~~ $_> because the default case uses C<$_ ~~ $c> , which is frequently the opposite of what you want. =item Z<>4. A boolean comparison operator such as C<$_ E<lt> 10> or C<$x eq "abc">. The relational operators that this applies to are the six numeric comparisons (C<< < >>, C<< > >>, C<< <= >>, C<< >= >>, C<< == >>, and C<< != >>), and the six string comparisons (C<lt>, C<gt>, C<le>, C<ge>, C<eq>, and C<ne>). =item Z<>5. At least the three builtin functions C<defined(...)>, C<exists(...)>, and C<eof(...)>. We might someday add more of these later if we think of them. =item Z<>6. A negated expression, whether C<!(EXPR)> or C<not(EXPR)>, or a logical exclusive-or, C<(EXPR1) xor (EXPR2)>. The bitwise versions (C<~> and C<^>) are not included. =item Z<>7. A filetest operator, with exactly 4 exceptions: C<-s>, C<-M>, C<-A>, and C<-C>, as these return numerical values, not boolean ones. The C<-z> filetest operator is not included in the exception list. =item Z<>8. The C<..> and C<...> flip-flop operators. Note that the C<...> flip-flop operator is completely different from the C<...> elliptical statement just described. =back In those 8 cases above, the value of EXPR is used directly as a boolean, so no smartmatching is done. You may think of C<when> as a smartsmartmatch. Furthermore, Perl inspects the operands of logical operators to decide whether to use smartmatching for each one by applying the above test to the operands: =over 4 =item Z<>9. If EXPR is C<EXPR1 && EXPR2> or C<EXPR1 and EXPR2>, the test is applied I<recursively> to both EXPR1 and EXPR2. Only if I<both> operands also pass the test, I<recursively>, will the expression be treated as boolean. Otherwise, smartmatching is used. =item Z<>10. If EXPR is C<EXPR1 || EXPR2>, C<EXPR1 // EXPR2>, or C<EXPR1 or EXPR2>, the test is applied I<recursively> to EXPR1 only (which might itself be a higher-precedence AND operator, for example, and thus subject to the previous rule), not to EXPR2. If EXPR1 is to use smartmatching, then EXPR2 also does so, no matter what EXPR2 contains. But if EXPR2 does not get to use smartmatching, then the second argument will not be either. This is quite different from the C<&&> case just described, so be careful. =back These rules are complicated, but the goal is for them to do what you want (even if you don't quite understand why they are doing it). For example: when (/^\d+$/ && $_ < 75) { ... } will be treated as a boolean match because the rules say both a regex match and an explicit test on C<$_> will be treated as boolean. Also: when ([qw(foo bar)] && /baz/) { ... } will use smartmatching because only I<one> of the operands is a boolean: the other uses smartmatching, and that wins. Further: when ([qw(foo bar)] || /^baz/) { ... } will use smart matching (only the first operand is considered), whereas when (/^baz/ || [qw(foo bar)]) { ... } will test only the regex, which causes both operands to be treated as boolean. Watch out for this one, then, because an arrayref is always a true value, which makes it effectively redundant. Not a good idea. Tautologous boolean operators are still going to be optimized away. Don't be tempted to write when ("foo" or "bar") { ... } This will optimize down to C<"foo">, so C<"bar"> will never be considered (even though the rules say to use a smartmatch on C<"foo">). For an alternation like this, an array ref will work, because this will instigate smartmatching: when ([qw(foo bar)] { ... } This is somewhat equivalent to the C-style switch statement's fallthrough functionality (not to be confused with I<Perl's> fallthrough functionality--see below), wherein the same block is used for several C<case> statements. Another useful shortcut is that, if you use a literal array or hash as the argument to C<given>, it is turned into a reference. So C<given(@foo)> is the same as C<given(\@foo)>, for example. C<default> behaves exactly like C<when(1 == 1)>, which is to say that it always matches. =head3 Breaking out You can use the C<break> keyword to break out of the enclosing C<given> block. Every C<when> block is implicitly ended with a C<break>. =head3 Fall-through You can use the C<continue> keyword to fall through from one case to the next immediate C<when> or C<default>: given($foo) { when (/x/) { say '$foo contains an x'; continue } when (/y/) { say '$foo contains a y' } default { say '$foo does not contain a y' } } =head3 Return value When a C<given> statement is also a valid expression (for example, when it's the last statement of a block), it evaluates to: =over 4 =item * An empty list as soon as an explicit C<break> is encountered. =item * The value of the last evaluated expression of the successful C<when>/C<default> clause, if there happens to be one. =item * The value of the last evaluated expression of the C<given> block if no condition is true. =back In both last cases, the last expression is evaluated in the context that was applied to the C<given> block. Note that, unlike C<if> and C<unless>, failed C<when> statements always evaluate to an empty list. my $price = do { given ($item) { when (["pear", "apple"]) { 1 } break when "vote"; # My vote cannot be bought 1e10 when /Mona Lisa/; "unknown"; } }; Currently, C<given> blocks can't always be used as proper expressions. This may be addressed in a future version of Perl. =head3 Switching in a loop Instead of using C<given()>, you can use a C<foreach()> loop. For example, here's one way to count how many times a particular string occurs in an array: use v5.10.1; my $count = 0; for (@array) { when ("foo") { ++$count } } print "\@array contains $count copies of 'foo'\n"; Or in a more recent version: use v5.14; my $count = 0; for (@array) { ++$count when "foo"; } print "\@array contains $count copies of 'foo'\n"; At the end of all C<when> blocks, there is an implicit C<next>. You can override that with an explicit C<last> if you're interested in only the first match alone. This doesn't work if you explicitly specify a loop variable, as in C<for $item (@array)>. You have to use the default variable C<$_>. =head3 Differences from Raku The Perl 5 smartmatch and C<given>/C<when> constructs are not compatible with their Raku analogues. The most visible difference and least important difference is that, in Perl 5, parentheses are required around the argument to C<given()> and C<when()> (except when this last one is used as a statement modifier). Parentheses in Raku are always optional in a control construct such as C<if()>, C<while()>, or C<when()>; they can't be made optional in Perl 5 without a great deal of potential confusion, because Perl 5 would parse the expression given $foo { ... } as though the argument to C<given> were an element of the hash C<%foo>, interpreting the braces as hash-element syntax. However, their are many, many other differences. For example, this works in Perl 5: use v5.12; my @primary = ("red", "blue", "green"); if (@primary ~~ "red") { say "primary smartmatches red"; } if ("red" ~~ @primary) { say "red smartmatches primary"; } say "that's all, folks!"; But it doesn't work at all in Raku. Instead, you should use the (parallelizable) C<any> operator: if any(@primary) eq "red" { say "primary smartmatches red"; } if "red" eq any(@primary) { say "red smartmatches primary"; } The table of smartmatches in L<perlop/"Smartmatch Operator"> is not identical to that proposed by the Raku specification, mainly due to differences between Raku's and Perl 5's data models, but also because the Raku spec has changed since Perl 5 rushed into early adoption. In Raku, C<when()> will always do an implicit smartmatch with its argument, while in Perl 5 it is convenient (albeit potentially confusing) to suppress this implicit smartmatch in various rather loosely-defined situations, as roughly outlined above. (The difference is largely because Perl 5 does not have, even internally, a boolean type.) =cut perl5303delta.pod 0000644 00000011564 15125556335 0007560 0 ustar 00 =encoding utf8 =head1 NAME perl5303delta - what is new for perl v5.30.3 =head1 DESCRIPTION This document describes differences between the 5.30.2 release and the 5.30.3 release. If you are upgrading from an earlier release such as 5.30.1, first read L<perl5302delta>, which describes differences between 5.30.1 and 5.30.2. =head1 Security =head2 [CVE-2020-10543] Buffer overflow caused by a crafted regular expression A signed C<size_t> integer overflow in the storage space calculations for nested regular expression quantifiers could cause a heap buffer overflow in Perl's regular expression compiler that overwrites memory allocated after the regular expression storage space with attacker supplied data. The target system needs a sufficient amount of memory to allocate partial expansions of the nested quantifiers prior to the overflow occurring. This requirement is unlikely to be met on 64-bit systems. Discovered by: ManhND of The Tarantula Team, VinCSS (a member of Vingroup). =head2 [CVE-2020-10878] Integer overflow via malformed bytecode produced by a crafted regular expression Integer overflows in the calculation of offsets between instructions for the regular expression engine could cause corruption of the intermediate language state of a compiled regular expression. An attacker could abuse this behaviour to insert instructions into the compiled form of a Perl regular expression. Discovered by: Hugo van der Sanden and Slaven Rezic. =head2 [CVE-2020-12723] Buffer overflow caused by a crafted regular expression Recursive calls to C<S_study_chunk()> by Perl's regular expression compiler to optimize the intermediate language representation of a regular expression could cause corruption of the intermediate language state of a compiled regular expression. Discovered by: Sergey Aleynikov. =head2 Additional Note An application written in Perl would only be vulnerable to any of the above flaws if it evaluates regular expressions supplied by the attacker. Evaluating regular expressions in this fashion is known to be dangerous since the regular expression engine does not protect against denial of service attacks in this usage scenario. =head1 Incompatible Changes There are no changes intentionally incompatible with Perl 5.30.2. If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Module::CoreList> has been upgraded from version 5.20200314 to 5.20200601_30. =back =head1 Testing Tests were added and changed to reflect the other additions and changes in this release. =head1 Acknowledgements Perl 5.30.3 represents approximately 3 months of development since Perl 5.30.2 and contains approximately 1,100 lines of changes across 42 files from 7 authors. Excluding auto-generated files, documentation and release tools, there were approximately 350 lines of changes to 8 .pm, .t, .c and .h files. Perl continues to flourish into its fourth decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.30.3: Chris 'BinGOs' Williams, Hugo van der Sanden, John Lightsey, Karl Williamson, Nicolas R., Sawyer X, Steve Hay. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the perl bug database at L<https://github.com/Perl/perl5/issues>. There may also be information at L<https://www.perl.org/>, the Perl Home Page. If you believe you have an unreported bug, please open an issue at L<https://github.com/Perl/perl5/issues>. Be sure to trim your bug down to a tiny but sufficient test case. If the bug you are reporting has security implications which make it inappropriate to send to a public issue tracker, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 Give Thanks If you wish to thank the Perl 5 Porters for the work we had done in Perl 5, you can do so by running the C<perlthanks> program: perlthanks This will send an email to the Perl 5 Porters list with your show of thanks. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlrepository.pod 0000644 00000000775 15125556335 0010375 0 ustar 00 =encoding utf8 =head1 NAME perlrepository - Links to current information on the Perl source repository =head1 DESCRIPTION Perl's source code is stored in a Git repository. See L<perlhack> for an explanation of Perl development, including the L<Super Quick Patch Guide|perlhack/SUPER QUICK PATCH GUIDE> for making and submitting a small patch. See L<perlgit> for detailed information about Perl's Git repository. (The above documents supersede the information that was formerly here in perlrepository.) perlhacktips.pod 0000644 00000160534 15125556335 0007764 0 ustar 00 =encoding utf8 =for comment Consistent formatting of this file is achieved with: perl ./Porting/podtidy pod/perlhacktips.pod =head1 NAME perlhacktips - Tips for Perl core C code hacking =head1 DESCRIPTION This document will help you learn the best way to go about hacking on the Perl core C code. It covers common problems, debugging, profiling, and more. If you haven't read L<perlhack> and L<perlhacktut> yet, you might want to do that first. =head1 COMMON PROBLEMS Perl source plays by ANSI C89 rules: no C99 (or C++) extensions. You don't care about some particular platform having broken Perl? I hear there is still a strong demand for J2EE programmers. =head2 Perl environment problems =over 4 =item * Not compiling with threading Compiling with threading (-Duseithreads) completely rewrites the function prototypes of Perl. You better try your changes with that. Related to this is the difference between "Perl_-less" and "Perl_-ly" APIs, for example: Perl_sv_setiv(aTHX_ ...); sv_setiv(...); The first one explicitly passes in the context, which is needed for e.g. threaded builds. The second one does that implicitly; do not get them mixed. If you are not passing in a aTHX_, you will need to do a dTHX (or a dVAR) as the first thing in the function. See L<perlguts/"How multiple interpreters and concurrency are supported"> for further discussion about context. =item * Not compiling with -DDEBUGGING The DEBUGGING define exposes more code to the compiler, therefore more ways for things to go wrong. You should try it. =item * Introducing (non-read-only) globals Do not introduce any modifiable globals, truly global or file static. They are bad form and complicate multithreading and other forms of concurrency. The right way is to introduce them as new interpreter variables, see F<intrpvar.h> (at the very end for binary compatibility). Introducing read-only (const) globals is okay, as long as you verify with e.g. C<nm libperl.a|egrep -v ' [TURtr] '> (if your C<nm> has BSD-style output) that the data you added really is read-only. (If it is, it shouldn't show up in the output of that command.) If you want to have static strings, make them constant: static const char etc[] = "..."; If you want to have arrays of constant strings, note carefully the right combination of C<const>s: static const char * const yippee[] = {"hi", "ho", "silver"}; There is a way to completely hide any modifiable globals (they are all moved to heap), the compilation setting C<-DPERL_GLOBAL_STRUCT_PRIVATE>. It is not normally used, but can be used for testing, read more about it in L<perlguts/"Background and PERL_IMPLICIT_CONTEXT">. =item * Not exporting your new function Some platforms (Win32, AIX, VMS, OS/2, to name a few) require any function that is part of the public API (the shared Perl library) to be explicitly marked as exported. See the discussion about F<embed.pl> in L<perlguts>. =item * Exporting your new function The new shiny result of either genuine new functionality or your arduous refactoring is now ready and correctly exported. So what could possibly go wrong? Maybe simply that your function did not need to be exported in the first place. Perl has a long and not so glorious history of exporting functions that it should not have. If the function is used only inside one source code file, make it static. See the discussion about F<embed.pl> in L<perlguts>. If the function is used across several files, but intended only for Perl's internal use (and this should be the common case), do not export it to the public API. See the discussion about F<embed.pl> in L<perlguts>. =back =head2 Portability problems The following are common causes of compilation and/or execution failures, not common to Perl as such. The C FAQ is good bedtime reading. Please test your changes with as many C compilers and platforms as possible; we will, anyway, and it's nice to save oneself from public embarrassment. If using gcc, you can add the C<-std=c89> option which will hopefully catch most of these unportabilities. (However it might also catch incompatibilities in your system's header files.) Use the Configure C<-Dgccansipedantic> flag to enable the gcc C<-ansi -pedantic> flags which enforce stricter ANSI rules. If using the C<gcc -Wall> note that not all the possible warnings (like C<-Wuninitialized>) are given unless you also compile with C<-O>. Note that if using gcc, starting from Perl 5.9.5 the Perl core source code files (the ones at the top level of the source code distribution, but not e.g. the extensions under ext/) are automatically compiled with as many as possible of the C<-std=c89>, C<-ansi>, C<-pedantic>, and a selection of C<-W> flags (see cflags.SH). Also study L<perlport> carefully to avoid any bad assumptions about the operating system, filesystems, character set, and so forth. You may once in a while try a "make microperl" to see whether we can still compile Perl with just the bare minimum of interfaces. (See README.micro.) Do not assume an operating system indicates a certain compiler. =over 4 =item * Casting pointers to integers or casting integers to pointers void castaway(U8* p) { IV i = p; or void castaway(U8* p) { IV i = (IV)p; Both are bad, and broken, and unportable. Use the PTR2IV() macro that does it right. (Likewise, there are PTR2UV(), PTR2NV(), INT2PTR(), and NUM2PTR().) =item * Casting between function pointers and data pointers Technically speaking casting between function pointers and data pointers is unportable and undefined, but practically speaking it seems to work, but you should use the FPTR2DPTR() and DPTR2FPTR() macros. Sometimes you can also play games with unions. =item * Assuming sizeof(int) == sizeof(long) There are platforms where longs are 64 bits, and platforms where ints are 64 bits, and while we are out to shock you, even platforms where shorts are 64 bits. This is all legal according to the C standard. (In other words, "long long" is not a portable way to specify 64 bits, and "long long" is not even guaranteed to be any wider than "long".) Instead, use the definitions IV, UV, IVSIZE, I32SIZE, and so forth. Avoid things like I32 because they are B<not> guaranteed to be I<exactly> 32 bits, they are I<at least> 32 bits, nor are they guaranteed to be B<int> or B<long>. If you really explicitly need 64-bit variables, use I64 and U64, but only if guarded by HAS_QUAD. =item * Assuming one can dereference any type of pointer for any type of data char *p = ...; long pony = *(long *)p; /* BAD */ Many platforms, quite rightly so, will give you a core dump instead of a pony if the p happens not to be correctly aligned. =item * Lvalue casts (int)*p = ...; /* BAD */ Simply not portable. Get your lvalue to be of the right type, or maybe use temporary variables, or dirty tricks with unions. =item * Assume B<anything> about structs (especially the ones you don't control, like the ones coming from the system headers) =over 8 =item * That a certain field exists in a struct =item * That no other fields exist besides the ones you know of =item * That a field is of certain signedness, sizeof, or type =item * That the fields are in a certain order =over 8 =item * While C guarantees the ordering specified in the struct definition, between different platforms the definitions might differ =back =item * That the sizeof(struct) or the alignments are the same everywhere =over 8 =item * There might be padding bytes between the fields to align the fields - the bytes can be anything =item * Structs are required to be aligned to the maximum alignment required by the fields - which for native types is for usually equivalent to sizeof() of the field =back =back =item * Assuming the character set is ASCIIish Perl can compile and run under EBCDIC platforms. See L<perlebcdic>. This is transparent for the most part, but because the character sets differ, you shouldn't use numeric (decimal, octal, nor hex) constants to refer to characters. You can safely say C<'A'>, but not C<0x41>. You can safely say C<'\n'>, but not C<\012>. However, you can use macros defined in F<utf8.h> to specify any code point portably. C<LATIN1_TO_NATIVE(0xDF)> is going to be the code point that means LATIN SMALL LETTER SHARP S on whatever platform you are running on (on ASCII platforms it compiles without adding any extra code, so there is zero performance hit on those). The acceptable inputs to C<LATIN1_TO_NATIVE> are from C<0x00> through C<0xFF>. If your input isn't guaranteed to be in that range, use C<UNICODE_TO_NATIVE> instead. C<NATIVE_TO_LATIN1> and C<NATIVE_TO_UNICODE> translate the opposite direction. If you need the string representation of a character that doesn't have a mnemonic name in C, you should add it to the list in F<regen/unicode_constants.pl>, and have Perl create C<#define>'s for you, based on the current platform. Note that the C<isI<FOO>> and C<toI<FOO>> macros in F<handy.h> work properly on native code points and strings. Also, the range 'A' - 'Z' in ASCII is an unbroken sequence of 26 upper case alphabetic characters. That is not true in EBCDIC. Nor for 'a' to 'z'. But '0' - '9' is an unbroken range in both systems. Don't assume anything about other ranges. (Note that special handling of ranges in regular expression patterns and transliterations makes it appear to Perl code that the aforementioned ranges are all unbroken.) Many of the comments in the existing code ignore the possibility of EBCDIC, and may be wrong therefore, even if the code works. This is actually a tribute to the successful transparent insertion of being able to handle EBCDIC without having to change pre-existing code. UTF-8 and UTF-EBCDIC are two different encodings used to represent Unicode code points as sequences of bytes. Macros with the same names (but different definitions) in F<utf8.h> and F<utfebcdic.h> are used to allow the calling code to think that there is only one such encoding. This is almost always referred to as C<utf8>, but it means the EBCDIC version as well. Again, comments in the code may well be wrong even if the code itself is right. For example, the concept of UTF-8 C<invariant characters> differs between ASCII and EBCDIC. On ASCII platforms, only characters that do not have the high-order bit set (i.e. whose ordinals are strict ASCII, 0 - 127) are invariant, and the documentation and comments in the code may assume that, often referring to something like, say, C<hibit>. The situation differs and is not so simple on EBCDIC machines, but as long as the code itself uses the C<NATIVE_IS_INVARIANT()> macro appropriately, it works, even if the comments are wrong. As noted in L<perlhack/TESTING>, when writing test scripts, the file F<t/charset_tools.pl> contains some helpful functions for writing tests valid on both ASCII and EBCDIC platforms. Sometimes, though, a test can't use a function and it's inconvenient to have different test versions depending on the platform. There are 20 code points that are the same in all 4 character sets currently recognized by Perl (the 3 EBCDIC code pages plus ISO 8859-1 (ASCII/Latin1)). These can be used in such tests, though there is a small possibility that Perl will become available in yet another character set, breaking your test. All but one of these code points are C0 control characters. The most significant controls that are the same are C<\0>, C<\r>, and C<\N{VT}> (also specifiable as C<\cK>, C<\x0B>, C<\N{U+0B}>, or C<\013>). The single non-control is U+00B6 PILCROW SIGN. The controls that are the same have the same bit pattern in all 4 character sets, regardless of the UTF8ness of the string containing them. The bit pattern for U+B6 is the same in all 4 for non-UTF8 strings, but differs in each when its containing string is UTF-8 encoded. The only other code points that have some sort of sameness across all 4 character sets are the pair 0xDC and 0xFC. Together these represent upper- and lowercase LATIN LETTER U WITH DIAERESIS, but which is upper and which is lower may be reversed: 0xDC is the capital in Latin1 and 0xFC is the small letter, while 0xFC is the capital in EBCDIC and 0xDC is the small one. This factoid may be exploited in writing case insensitive tests that are the same across all 4 character sets. =item * Assuming the character set is just ASCII ASCII is a 7 bit encoding, but bytes have 8 bits in them. The 128 extra characters have different meanings depending on the locale. Absent a locale, currently these extra characters are generally considered to be unassigned, and this has presented some problems. This has being changed starting in 5.12 so that these characters can be considered to be Latin-1 (ISO-8859-1). =item * Mixing #define and #ifdef #define BURGLE(x) ... \ #ifdef BURGLE_OLD_STYLE /* BAD */ ... do it the old way ... \ #else ... do it the new way ... \ #endif You cannot portably "stack" cpp directives. For example in the above you need two separate BURGLE() #defines, one for each #ifdef branch. =item * Adding non-comment stuff after #endif or #else #ifdef SNOSH ... #else !SNOSH /* BAD */ ... #endif SNOSH /* BAD */ The #endif and #else cannot portably have anything non-comment after them. If you want to document what is going (which is a good idea especially if the branches are long), use (C) comments: #ifdef SNOSH ... #else /* !SNOSH */ ... #endif /* SNOSH */ The gcc option C<-Wendif-labels> warns about the bad variant (by default on starting from Perl 5.9.4). =item * Having a comma after the last element of an enum list enum color { CERULEAN, CHARTREUSE, CINNABAR, /* BAD */ }; is not portable. Leave out the last comma. Also note that whether enums are implicitly morphable to ints varies between compilers, you might need to (int). =item * Using //-comments // This function bamfoodles the zorklator. /* BAD */ That is C99 or C++. Perl is C89. Using the //-comments is silently allowed by many C compilers but cranking up the ANSI C89 strictness (which we like to do) causes the compilation to fail. =item * Mixing declarations and code void zorklator() { int n = 3; set_zorkmids(n); /* BAD */ int q = 4; That is C99 or C++. Some C compilers allow that, but you shouldn't. The gcc option C<-Wdeclaration-after-statement> scans for such problems (by default on starting from Perl 5.9.4). =item * Introducing variables inside for() for(int i = ...; ...; ...) { /* BAD */ That is C99 or C++. While it would indeed be awfully nice to have that also in C89, to limit the scope of the loop variable, alas, we cannot. =item * Mixing signed char pointers with unsigned char pointers int foo(char *s) { ... } ... unsigned char *t = ...; /* Or U8* t = ... */ foo(t); /* BAD */ While this is legal practice, it is certainly dubious, and downright fatal in at least one platform: for example VMS cc considers this a fatal error. One cause for people often making this mistake is that a "naked char" and therefore dereferencing a "naked char pointer" have an undefined signedness: it depends on the compiler and the flags of the compiler and the underlying platform whether the result is signed or unsigned. For this very same reason using a 'char' as an array index is bad. =item * Macros that have string constants and their arguments as substrings of the string constants #define FOO(n) printf("number = %d\n", n) /* BAD */ FOO(10); Pre-ANSI semantics for that was equivalent to printf("10umber = %d\10"); which is probably not what you were expecting. Unfortunately at least one reasonably common and modern C compiler does "real backward compatibility" here, in AIX that is what still happens even though the rest of the AIX compiler is very happily C89. =item * Using printf formats for non-basic C types IV i = ...; printf("i = %d\n", i); /* BAD */ While this might by accident work in some platform (where IV happens to be an C<int>), in general it cannot. IV might be something larger. Even worse the situation is with more specific types (defined by Perl's configuration step in F<config.h>): Uid_t who = ...; printf("who = %d\n", who); /* BAD */ The problem here is that Uid_t might be not only not C<int>-wide but it might also be unsigned, in which case large uids would be printed as negative values. There is no simple solution to this because of printf()'s limited intelligence, but for many types the right format is available as with either 'f' or '_f' suffix, for example: IVdf /* IV in decimal */ UVxf /* UV is hexadecimal */ printf("i = %"IVdf"\n", i); /* The IVdf is a string constant. */ Uid_t_f /* Uid_t in decimal */ printf("who = %"Uid_t_f"\n", who); Or you can try casting to a "wide enough" type: printf("i = %"IVdf"\n", (IV)something_very_small_and_signed); See L<perlguts/Formatted Printing of Size_t and SSize_t> for how to print those. Also remember that the C<%p> format really does require a void pointer: U8* p = ...; printf("p = %p\n", (void*)p); The gcc option C<-Wformat> scans for such problems. =item * Blindly using variadic macros gcc has had them for a while with its own syntax, and C99 brought them with a standardized syntax. Don't use the former, and use the latter only if the HAS_C99_VARIADIC_MACROS is defined. =item * Blindly passing va_list Not all platforms support passing va_list to further varargs (stdarg) functions. The right thing to do is to copy the va_list using the Perl_va_copy() if the NEED_VA_COPY is defined. =item * Using gcc statement expressions val = ({...;...;...}); /* BAD */ While a nice extension, it's not portable. The Perl code does admittedly use them if available to gain some extra speed (essentially as a funky form of inlining), but you shouldn't. =item * Binding together several statements in a macro Use the macros STMT_START and STMT_END. STMT_START { ... } STMT_END =item * Testing for operating systems or versions when should be testing for features #ifdef __FOONIX__ /* BAD */ foo = quux(); #endif Unless you know with 100% certainty that quux() is only ever available for the "Foonix" operating system B<and> that is available B<and> correctly working for B<all> past, present, B<and> future versions of "Foonix", the above is very wrong. This is more correct (though still not perfect, because the below is a compile-time check): #ifdef HAS_QUUX foo = quux(); #endif How does the HAS_QUUX become defined where it needs to be? Well, if Foonix happens to be Unixy enough to be able to run the Configure script, and Configure has been taught about detecting and testing quux(), the HAS_QUUX will be correctly defined. In other platforms, the corresponding configuration step will hopefully do the same. In a pinch, if you cannot wait for Configure to be educated, or if you have a good hunch of where quux() might be available, you can temporarily try the following: #if (defined(__FOONIX__) || defined(__BARNIX__)) # define HAS_QUUX #endif ... #ifdef HAS_QUUX foo = quux(); #endif But in any case, try to keep the features and operating systems separate. A good resource on the predefined macros for various operating systems, compilers, and so forth is L<http://sourceforge.net/p/predef/wiki/Home/> =item * Assuming the contents of static memory pointed to by the return values of Perl wrappers for C library functions doesn't change. Many C library functions return pointers to static storage that can be overwritten by subsequent calls to the same or related functions. Perl has light-weight wrappers for some of these functions, and which don't make copies of the static memory. A good example is the interface to the environment variables that are in effect for the program. Perl has C<PerlEnv_getenv> to get values from the environment. But the return is a pointer to static memory in the C library. If you are using the value to immediately test for something, that's fine, but if you save the value and expect it to be unchanged by later processing, you would be wrong, but perhaps you wouldn't know it because different C library implementations behave differently, and the one on the platform you're testing on might work for your situation. But on some platforms, a subsequent call to C<PerlEnv_getenv> or related function WILL overwrite the memory that your first call points to. This has led to some hard-to-debug problems. Do a L<perlapi/savepv> to make a copy, thus avoiding these problems. You will have to free the copy when you're done to avoid memory leaks. If you don't have control over when it gets freed, you'll need to make the copy in a mortal scalar, like so: if ((s = PerlEnv_getenv("foo") == NULL) { ... /* handle NULL case */ } else { s = SvPVX(sv_2mortal(newSVpv(s, 0))); } The above example works only if C<"s"> is C<NUL>-terminated; otherwise you have to pass its length to C<newSVpv>. =back =head2 Problematic System Interfaces =over 4 =item * Perl strings are NOT the same as C strings: They may contain C<NUL> characters, whereas a C string is terminated by the first C<NUL>. That is why Perl API functions that deal with strings generally take a pointer to the first byte and either a length or a pointer to the byte just beyond the final one. And this is the reason that many of the C library string handling functions should not be used. They don't cope with the full generality of Perl strings. It may be that your test cases don't have embedded C<NUL>s, and so the tests pass, whereas there may well eventually arise real-world cases where they fail. A lesson here is to include C<NUL>s in your tests. Now it's fairly rare in most real world cases to get C<NUL>s, so your code may seem to work, until one day a C<NUL> comes along. Here's an example. It used to be a common paradigm, for decades, in the perl core to use S<C<strchr("list", c)>> to see if the character C<c> is any of the ones given in C<"list">, a double-quote-enclosed string of the set of characters that we are seeing if C<c> is one of. As long as C<c> isn't a C<NUL>, it works. But when C<c> is a C<NUL>, C<strchr> returns a pointer to the terminating C<NUL> in C<"list">. This likely will result in a segfault or a security issue when the caller uses that end pointer as the starting point to read from. A solution to this and many similar issues is to use the C<mem>I<-foo> C library functions instead. In this case C<memchr> can be used to see if C<c> is in C<"list"> and works even if C<c> is C<NUL>. These functions need an additional parameter to give the string length. In the case of literal string parameters, perl has defined macros that calculate the length for you. See L<perlapi/Miscellaneous Functions>. =item * malloc(0), realloc(0), calloc(0, 0) are non-portable. To be portable allocate at least one byte. (In general you should rarely need to work at this low level, but instead use the various malloc wrappers.) =item * snprintf() - the return type is unportable. Use my_snprintf() instead. =back =head2 Security problems Last but not least, here are various tips for safer coding. See also L<perlclib> for libc/stdio replacements one should use. =over 4 =item * Do not use gets() Or we will publicly ridicule you. Seriously. =item * Do not use tmpfile() Use mkstemp() instead. =item * Do not use strcpy() or strcat() or strncpy() or strncat() Use my_strlcpy() and my_strlcat() instead: they either use the native implementation, or Perl's own implementation (borrowed from the public domain implementation of INN). =item * Do not use sprintf() or vsprintf() If you really want just plain byte strings, use my_snprintf() and my_vsnprintf() instead, which will try to use snprintf() and vsnprintf() if those safer APIs are available. If you want something fancier than a plain byte string, use L<C<Perl_form>()|perlapi/form> or SVs and L<C<Perl_sv_catpvf()>|perlapi/sv_catpvf>. Note that glibc C<printf()>, C<sprintf()>, etc. are buggy before glibc version 2.17. They won't allow a C<%.s> format with a precision to create a string that isn't valid UTF-8 if the current underlying locale of the program is UTF-8. What happens is that the C<%s> and its operand are simply skipped without any notice. L<https://sourceware.org/bugzilla/show_bug.cgi?id=6530>. =item * Do not use atoi() Use grok_atoUV() instead. atoi() has ill-defined behavior on overflows, and cannot be used for incremental parsing. It is also affected by locale, which is bad. =item * Do not use strtol() or strtoul() Use grok_atoUV() instead. strtol() or strtoul() (or their IV/UV-friendly macro disguises, Strtol() and Strtoul(), or Atol() and Atoul() are affected by locale, which is bad. =back =head1 DEBUGGING You can compile a special debugging version of Perl, which allows you to use the C<-D> option of Perl to tell more about what Perl is doing. But sometimes there is no alternative than to dive in with a debugger, either to see the stack trace of a core dump (very useful in a bug report), or trying to figure out what went wrong before the core dump happened, or how did we end up having wrong or unexpected results. =head2 Poking at Perl To really poke around with Perl, you'll probably want to build Perl for debugging, like this: ./Configure -d -DDEBUGGING make C<-DDEBUGGING> turns on the C compiler's C<-g> flag to have it produce debugging information which will allow us to step through a running program, and to see in which C function we are at (without the debugging information we might see only the numerical addresses of the functions, which is not very helpful). It will also turn on the C<DEBUGGING> compilation symbol which enables all the internal debugging code in Perl. There are a whole bunch of things you can debug with this: L<perlrun|perlrun/-Dletters> lists them all, and the best way to find out about them is to play about with them. The most useful options are probably l Context (loop) stack processing s Stack snapshots (with v, displays all stacks) t Trace execution o Method and overloading resolution c String/numeric conversions For example $ perl -Dst -e '$a + 1' .... (-e:1) gvsv(main::a) => UNDEF (-e:1) const(IV(1)) => UNDEF IV(1) (-e:1) add => NV(1) Some of the functionality of the debugging code can be achieved with a non-debugging perl by using XS modules: -Dr => use re 'debug' -Dx => use O 'Debug' =head2 Using a source-level debugger If the debugging output of C<-D> doesn't help you, it's time to step through perl's execution with a source-level debugger. =over 3 =item * We'll use C<gdb> for our examples here; the principles will apply to any debugger (many vendors call their debugger C<dbx>), but check the manual of the one you're using. =back To fire up the debugger, type gdb ./perl Or if you have a core dump: gdb ./perl core You'll want to do that in your Perl source tree so the debugger can read the source code. You should see the copyright message, followed by the prompt. (gdb) C<help> will get you into the documentation, but here are the most useful commands: =over 3 =item * run [args] Run the program with the given arguments. =item * break function_name =item * break source.c:xxx Tells the debugger that we'll want to pause execution when we reach either the named function (but see L<perlguts/Internal Functions>!) or the given line in the named source file. =item * step Steps through the program a line at a time. =item * next Steps through the program a line at a time, without descending into functions. =item * continue Run until the next breakpoint. =item * finish Run until the end of the current function, then stop again. =item * 'enter' Just pressing Enter will do the most recent operation again - it's a blessing when stepping through miles of source code. =item * ptype Prints the C definition of the argument given. (gdb) ptype PL_op type = struct op { OP *op_next; OP *op_sibparent; OP *(*op_ppaddr)(void); PADOFFSET op_targ; unsigned int op_type : 9; unsigned int op_opt : 1; unsigned int op_slabbed : 1; unsigned int op_savefree : 1; unsigned int op_static : 1; unsigned int op_folded : 1; unsigned int op_spare : 2; U8 op_flags; U8 op_private; } * =item * print Execute the given C code and print its results. B<WARNING>: Perl makes heavy use of macros, and F<gdb> does not necessarily support macros (see later L</"gdb macro support">). You'll have to substitute them yourself, or to invoke cpp on the source code files (see L</"The .i Targets">) So, for instance, you can't say print SvPV_nolen(sv) but you have to say print Perl_sv_2pv_nolen(sv) =back You may find it helpful to have a "macro dictionary", which you can produce by saying C<cpp -dM perl.c | sort>. Even then, F<cpp> won't recursively apply those macros for you. =head2 gdb macro support Recent versions of F<gdb> have fairly good macro support, but in order to use it you'll need to compile perl with macro definitions included in the debugging information. Using F<gcc> version 3.1, this means configuring with C<-Doptimize=-g3>. Other compilers might use a different switch (if they support debugging macros at all). =head2 Dumping Perl Data Structures One way to get around this macro hell is to use the dumping functions in F<dump.c>; these work a little like an internal L<Devel::Peek|Devel::Peek>, but they also cover OPs and other structures that you can't get at from Perl. Let's take an example. We'll use the C<$a = $b + $c> we used before, but give it a bit of context: C<$b = "6XXXX"; $c = 2.3;>. Where's a good place to stop and poke around? What about C<pp_add>, the function we examined earlier to implement the C<+> operator: (gdb) break Perl_pp_add Breakpoint 1 at 0x46249f: file pp_hot.c, line 309. Notice we use C<Perl_pp_add> and not C<pp_add> - see L<perlguts/Internal Functions>. With the breakpoint in place, we can run our program: (gdb) run -e '$b = "6XXXX"; $c = 2.3; $a = $b + $c' Lots of junk will go past as gdb reads in the relevant source files and libraries, and then: Breakpoint 1, Perl_pp_add () at pp_hot.c:309 1396 dSP; dATARGET; bool useleft; SV *svl, *svr; (gdb) step 311 dPOPTOPnnrl_ul; (gdb) We looked at this bit of code before, and we said that C<dPOPTOPnnrl_ul> arranges for two C<NV>s to be placed into C<left> and C<right> - let's slightly expand it: #define dPOPTOPnnrl_ul NV right = POPn; \ SV *leftsv = TOPs; \ NV left = USE_LEFT(leftsv) ? SvNV(leftsv) : 0.0 C<POPn> takes the SV from the top of the stack and obtains its NV either directly (if C<SvNOK> is set) or by calling the C<sv_2nv> function. C<TOPs> takes the next SV from the top of the stack - yes, C<POPn> uses C<TOPs> - but doesn't remove it. We then use C<SvNV> to get the NV from C<leftsv> in the same way as before - yes, C<POPn> uses C<SvNV>. Since we don't have an NV for C<$b>, we'll have to use C<sv_2nv> to convert it. If we step again, we'll find ourselves there: (gdb) step Perl_sv_2nv (sv=0xa0675d0) at sv.c:1669 1669 if (!sv) (gdb) We can now use C<Perl_sv_dump> to investigate the SV: (gdb) print Perl_sv_dump(sv) SV = PV(0xa057cc0) at 0xa0675d0 REFCNT = 1 FLAGS = (POK,pPOK) PV = 0xa06a510 "6XXXX"\0 CUR = 5 LEN = 6 $1 = void We know we're going to get C<6> from this, so let's finish the subroutine: (gdb) finish Run till exit from #0 Perl_sv_2nv (sv=0xa0675d0) at sv.c:1671 0x462669 in Perl_pp_add () at pp_hot.c:311 311 dPOPTOPnnrl_ul; We can also dump out this op: the current op is always stored in C<PL_op>, and we can dump it with C<Perl_op_dump>. This'll give us similar output to CPAN module B::Debug. (gdb) print Perl_op_dump(PL_op) { 13 TYPE = add ===> 14 TARG = 1 FLAGS = (SCALAR,KIDS) { TYPE = null ===> (12) (was rv2sv) FLAGS = (SCALAR,KIDS) { 11 TYPE = gvsv ===> 12 FLAGS = (SCALAR) GV = main::b } } # finish this later # =head2 Using gdb to look at specific parts of a program With the example above, you knew to look for C<Perl_pp_add>, but what if there were multiple calls to it all over the place, or you didn't know what the op was you were looking for? One way to do this is to inject a rare call somewhere near what you're looking for. For example, you could add C<study> before your method: study; And in gdb do: (gdb) break Perl_pp_study And then step until you hit what you're looking for. This works well in a loop if you want to only break at certain iterations: for my $c (1..100) { study if $c == 50; } =head2 Using gdb to look at what the parser/lexer are doing If you want to see what perl is doing when parsing/lexing your code, you can use C<BEGIN {}>: print "Before\n"; BEGIN { study; } print "After\n"; And in gdb: (gdb) break Perl_pp_study If you want to see what the parser/lexer is doing inside of C<if> blocks and the like you need to be a little trickier: if ($a && $b && do { BEGIN { study } 1 } && $c) { ... } =head1 SOURCE CODE STATIC ANALYSIS Various tools exist for analysing C source code B<statically>, as opposed to B<dynamically>, that is, without executing the code. It is possible to detect resource leaks, undefined behaviour, type mismatches, portability problems, code paths that would cause illegal memory accesses, and other similar problems by just parsing the C code and looking at the resulting graph, what does it tell about the execution and data flows. As a matter of fact, this is exactly how C compilers know to give warnings about dubious code. =head2 lint The good old C code quality inspector, C<lint>, is available in several platforms, but please be aware that there are several different implementations of it by different vendors, which means that the flags are not identical across different platforms. There is a C<lint> target in Makefile, but you may have to diddle with the flags (see above). =head2 Coverity Coverity (L<http://www.coverity.com/>) is a product similar to lint and as a testbed for their product they periodically check several open source projects, and they give out accounts to open source developers to the defect databases. There is Coverity setup for the perl5 project: L<https://scan.coverity.com/projects/perl5> =head2 HP-UX cadvise (Code Advisor) HP has a C/C++ static analyzer product for HP-UX caller Code Advisor. (Link not given here because the URL is horribly long and seems horribly unstable; use the search engine of your choice to find it.) The use of the C<cadvise_cc> recipe with C<Configure ... -Dcc=./cadvise_cc> (see cadvise "User Guide") is recommended; as is the use of C<+wall>. =head2 cpd (cut-and-paste detector) The cpd tool detects cut-and-paste coding. If one instance of the cut-and-pasted code changes, all the other spots should probably be changed, too. Therefore such code should probably be turned into a subroutine or a macro. cpd (L<http://pmd.sourceforge.net/cpd.html>) is part of the pmd project (L<http://pmd.sourceforge.net/>). pmd was originally written for static analysis of Java code, but later the cpd part of it was extended to parse also C and C++. Download the pmd-bin-X.Y.zip () from the SourceForge site, extract the pmd-X.Y.jar from it, and then run that on source code thusly: java -cp pmd-X.Y.jar net.sourceforge.pmd.cpd.CPD \ --minimum-tokens 100 --files /some/where/src --language c > cpd.txt You may run into memory limits, in which case you should use the -Xmx option: java -Xmx512M ... =head2 gcc warnings Though much can be written about the inconsistency and coverage problems of gcc warnings (like C<-Wall> not meaning "all the warnings", or some common portability problems not being covered by C<-Wall>, or C<-ansi> and C<-pedantic> both being a poorly defined collection of warnings, and so forth), gcc is still a useful tool in keeping our coding nose clean. The C<-Wall> is by default on. The C<-ansi> (and its sidekick, C<-pedantic>) would be nice to be on always, but unfortunately they are not safe on all platforms, they can for example cause fatal conflicts with the system headers (Solaris being a prime example). If Configure C<-Dgccansipedantic> is used, the C<cflags> frontend selects C<-ansi -pedantic> for the platforms where they are known to be safe. The following extra flags are added: =over 4 =item * C<-Wendif-labels> =item * C<-Wextra> =item * C<-Wc++-compat> =item * C<-Wwrite-strings> =item * C<-Werror=declaration-after-statement> =item * C<-Werror=pointer-arith> =back The following flags would be nice to have but they would first need their own Augean stablemaster: =over 4 =item * C<-Wshadow> =item * C<-Wstrict-prototypes> =back The C<-Wtraditional> is another example of the annoying tendency of gcc to bundle a lot of warnings under one switch (it would be impossible to deploy in practice because it would complain a lot) but it does contain some warnings that would be beneficial to have available on their own, such as the warning about string constants inside macros containing the macro arguments: this behaved differently pre-ANSI than it does in ANSI, and some C compilers are still in transition, AIX being an example. =head2 Warnings of other C compilers Other C compilers (yes, there B<are> other C compilers than gcc) often have their "strict ANSI" or "strict ANSI with some portability extensions" modes on, like for example the Sun Workshop has its C<-Xa> mode on (though implicitly), or the DEC (these days, HP...) has its C<-std1> mode on. =head1 MEMORY DEBUGGERS B<NOTE 1>: Running under older memory debuggers such as Purify, valgrind or Third Degree greatly slows down the execution: seconds become minutes, minutes become hours. For example as of Perl 5.8.1, the ext/Encode/t/Unicode.t takes extraordinarily long to complete under e.g. Purify, Third Degree, and valgrind. Under valgrind it takes more than six hours, even on a snappy computer. The said test must be doing something that is quite unfriendly for memory debuggers. If you don't feel like waiting, that you can simply kill away the perl process. Roughly valgrind slows down execution by factor 10, AddressSanitizer by factor 2. B<NOTE 2>: To minimize the number of memory leak false alarms (see L</PERL_DESTRUCT_LEVEL> for more information), you have to set the environment variable PERL_DESTRUCT_LEVEL to 2. For example, like this: env PERL_DESTRUCT_LEVEL=2 valgrind ./perl -Ilib ... B<NOTE 3>: There are known memory leaks when there are compile-time errors within eval or require, seeing C<S_doeval> in the call stack is a good sign of these. Fixing these leaks is non-trivial, unfortunately, but they must be fixed eventually. B<NOTE 4>: L<DynaLoader> will not clean up after itself completely unless Perl is built with the Configure option C<-Accflags=-DDL_UNLOAD_ALL_AT_EXIT>. =head2 valgrind The valgrind tool can be used to find out both memory leaks and illegal heap memory accesses. As of version 3.3.0, Valgrind only supports Linux on x86, x86-64 and PowerPC and Darwin (OS X) on x86 and x86-64. The special "test.valgrind" target can be used to run the tests under valgrind. Found errors and memory leaks are logged in files named F<testfile.valgrind> and by default output is displayed inline. Example usage: make test.valgrind Since valgrind adds significant overhead, tests will take much longer to run. The valgrind tests support being run in parallel to help with this: TEST_JOBS=9 make test.valgrind Note that the above two invocations will be very verbose as reachable memory and leak-checking is enabled by default. If you want to just see pure errors, try: VG_OPTS='-q --leak-check=no --show-reachable=no' TEST_JOBS=9 \ make test.valgrind Valgrind also provides a cachegrind tool, invoked on perl as: VG_OPTS=--tool=cachegrind make test.valgrind As system libraries (most notably glibc) are also triggering errors, valgrind allows to suppress such errors using suppression files. The default suppression file that comes with valgrind already catches a lot of them. Some additional suppressions are defined in F<t/perl.supp>. To get valgrind and for more information see http://valgrind.org/ =head2 AddressSanitizer AddressSanitizer ("ASan") consists of a compiler instrumentation module and a run-time C<malloc> library. ASan is available for a variety of architectures, operating systems, and compilers (see project link below). It checks for unsafe memory usage, such as use after free and buffer overflow conditions, and is fast enough that you can easily compile your debugging or optimized perl with it. Modern versions of ASan check for memory leaks by default on most platforms, otherwise (e.g. x86_64 OS X) this feature can be enabled via C<ASAN_OPTIONS=detect_leaks=1>. To build perl with AddressSanitizer, your Configure invocation should look like: sh Configure -des -Dcc=clang \ -Accflags=-fsanitize=address -Aldflags=-fsanitize=address \ -Alddlflags=-shared\ -fsanitize=address \ -fsanitize-blacklist=`pwd`/asan_ignore where these arguments mean: =over 4 =item * -Dcc=clang This should be replaced by the full path to your clang executable if it is not in your path. =item * -Accflags=-fsanitize=address Compile perl and extensions sources with AddressSanitizer. =item * -Aldflags=-fsanitize=address Link the perl executable with AddressSanitizer. =item * -Alddlflags=-shared\ -fsanitize=address Link dynamic extensions with AddressSanitizer. You must manually specify C<-shared> because using C<-Alddlflags=-shared> will prevent Configure from setting a default value for C<lddlflags>, which usually contains C<-shared> (at least on Linux). =item * -fsanitize-blacklist=`pwd`/asan_ignore AddressSanitizer will ignore functions listed in the C<asan_ignore> file. (This file should contain a short explanation of why each of the functions is listed.) =back See also L<https://github.com/google/sanitizers/wiki/AddressSanitizer>. =head1 PROFILING Depending on your platform there are various ways of profiling Perl. There are two commonly used techniques of profiling executables: I<statistical time-sampling> and I<basic-block counting>. The first method takes periodically samples of the CPU program counter, and since the program counter can be correlated with the code generated for functions, we get a statistical view of in which functions the program is spending its time. The caveats are that very small/fast functions have lower probability of showing up in the profile, and that periodically interrupting the program (this is usually done rather frequently, in the scale of milliseconds) imposes an additional overhead that may skew the results. The first problem can be alleviated by running the code for longer (in general this is a good idea for profiling), the second problem is usually kept in guard by the profiling tools themselves. The second method divides up the generated code into I<basic blocks>. Basic blocks are sections of code that are entered only in the beginning and exited only at the end. For example, a conditional jump starts a basic block. Basic block profiling usually works by I<instrumenting> the code by adding I<enter basic block #nnnn> book-keeping code to the generated code. During the execution of the code the basic block counters are then updated appropriately. The caveat is that the added extra code can skew the results: again, the profiling tools usually try to factor their own effects out of the results. =head2 Gprof Profiling I<gprof> is a profiling tool available in many Unix platforms which uses I<statistical time-sampling>. You can build a profiled version of F<perl> by compiling using gcc with the flag C<-pg>. Either edit F<config.sh> or re-run F<Configure>. Running the profiled version of Perl will create an output file called F<gmon.out> which contains the profiling data collected during the execution. quick hint: $ sh Configure -des -Dusedevel -Accflags='-pg' \ -Aldflags='-pg' -Alddlflags='-pg -shared' \ && make perl $ ./perl ... # creates gmon.out in current directory $ gprof ./perl > out $ less out (you probably need to add C<-shared> to the <-Alddlflags> line until RT #118199 is resolved) The F<gprof> tool can then display the collected data in various ways. Usually F<gprof> understands the following options: =over 4 =item * -a Suppress statically defined functions from the profile. =item * -b Suppress the verbose descriptions in the profile. =item * -e routine Exclude the given routine and its descendants from the profile. =item * -f routine Display only the given routine and its descendants in the profile. =item * -s Generate a summary file called F<gmon.sum> which then may be given to subsequent gprof runs to accumulate data over several runs. =item * -z Display routines that have zero usage. =back For more detailed explanation of the available commands and output formats, see your own local documentation of F<gprof>. =head2 GCC gcov Profiling I<basic block profiling> is officially available in gcc 3.0 and later. You can build a profiled version of F<perl> by compiling using gcc with the flags C<-fprofile-arcs -ftest-coverage>. Either edit F<config.sh> or re-run F<Configure>. quick hint: $ sh Configure -des -Dusedevel -Doptimize='-g' \ -Accflags='-fprofile-arcs -ftest-coverage' \ -Aldflags='-fprofile-arcs -ftest-coverage' \ -Alddlflags='-fprofile-arcs -ftest-coverage -shared' \ && make perl $ rm -f regexec.c.gcov regexec.gcda $ ./perl ... $ gcov regexec.c $ less regexec.c.gcov (you probably need to add C<-shared> to the <-Alddlflags> line until RT #118199 is resolved) Running the profiled version of Perl will cause profile output to be generated. For each source file an accompanying F<.gcda> file will be created. To display the results you use the I<gcov> utility (which should be installed if you have gcc 3.0 or newer installed). F<gcov> is run on source code files, like this gcov sv.c which will cause F<sv.c.gcov> to be created. The F<.gcov> files contain the source code annotated with relative frequencies of execution indicated by "#" markers. If you want to generate F<.gcov> files for all profiled object files, you can run something like this: for file in `find . -name \*.gcno` do sh -c "cd `dirname $file` && gcov `basename $file .gcno`" done Useful options of F<gcov> include C<-b> which will summarise the basic block, branch, and function call coverage, and C<-c> which instead of relative frequencies will use the actual counts. For more information on the use of F<gcov> and basic block profiling with gcc, see the latest GNU CC manual. As of gcc 4.8, this is at L<http://gcc.gnu.org/onlinedocs/gcc/Gcov-Intro.html#Gcov-Intro> =head1 MISCELLANEOUS TRICKS =head2 PERL_DESTRUCT_LEVEL If you want to run any of the tests yourself manually using e.g. valgrind, please note that by default perl B<does not> explicitly cleanup all the memory it has allocated (such as global memory arenas) but instead lets the exit() of the whole program "take care" of such allocations, also known as "global destruction of objects". There is a way to tell perl to do complete cleanup: set the environment variable PERL_DESTRUCT_LEVEL to a non-zero value. The t/TEST wrapper does set this to 2, and this is what you need to do too, if you don't want to see the "global leaks": For example, for running under valgrind env PERL_DESTRUCT_LEVEL=2 valgrind ./perl -Ilib t/foo/bar.t (Note: the mod_perl apache module uses also this environment variable for its own purposes and extended its semantics. Refer to the mod_perl documentation for more information. Also, spawned threads do the equivalent of setting this variable to the value 1.) If, at the end of a run you get the message I<N scalars leaked>, you can recompile with C<-DDEBUG_LEAKING_SCALARS>, (C<Configure -Accflags=-DDEBUG_LEAKING_SCALARS>), which will cause the addresses of all those leaked SVs to be dumped along with details as to where each SV was originally allocated. This information is also displayed by Devel::Peek. Note that the extra details recorded with each SV increases memory usage, so it shouldn't be used in production environments. It also converts C<new_SV()> from a macro into a real function, so you can use your favourite debugger to discover where those pesky SVs were allocated. If you see that you're leaking memory at runtime, but neither valgrind nor C<-DDEBUG_LEAKING_SCALARS> will find anything, you're probably leaking SVs that are still reachable and will be properly cleaned up during destruction of the interpreter. In such cases, using the C<-Dm> switch can point you to the source of the leak. If the executable was built with C<-DDEBUG_LEAKING_SCALARS>, C<-Dm> will output SV allocations in addition to memory allocations. Each SV allocation has a distinct serial number that will be written on creation and destruction of the SV. So if you're executing the leaking code in a loop, you need to look for SVs that are created, but never destroyed between each cycle. If such an SV is found, set a conditional breakpoint within C<new_SV()> and make it break only when C<PL_sv_serial> is equal to the serial number of the leaking SV. Then you will catch the interpreter in exactly the state where the leaking SV is allocated, which is sufficient in many cases to find the source of the leak. As C<-Dm> is using the PerlIO layer for output, it will by itself allocate quite a bunch of SVs, which are hidden to avoid recursion. You can bypass the PerlIO layer if you use the SV logging provided by C<-DPERL_MEM_LOG> instead. =head2 PERL_MEM_LOG If compiled with C<-DPERL_MEM_LOG> (C<-Accflags=-DPERL_MEM_LOG>), both memory and SV allocations go through logging functions, which is handy for breakpoint setting. Unless C<-DPERL_MEM_LOG_NOIMPL> (C<-Accflags=-DPERL_MEM_LOG_NOIMPL>) is also compiled, the logging functions read $ENV{PERL_MEM_LOG} to determine whether to log the event, and if so how: $ENV{PERL_MEM_LOG} =~ /m/ Log all memory ops $ENV{PERL_MEM_LOG} =~ /s/ Log all SV ops $ENV{PERL_MEM_LOG} =~ /t/ include timestamp in Log $ENV{PERL_MEM_LOG} =~ /^(\d+)/ write to FD given (default is 2) Memory logging is somewhat similar to C<-Dm> but is independent of C<-DDEBUGGING>, and at a higher level; all uses of Newx(), Renew(), and Safefree() are logged with the caller's source code file and line number (and C function name, if supported by the C compiler). In contrast, C<-Dm> is directly at the point of C<malloc()>. SV logging is similar. Since the logging doesn't use PerlIO, all SV allocations are logged and no extra SV allocations are introduced by enabling the logging. If compiled with C<-DDEBUG_LEAKING_SCALARS>, the serial number for each SV allocation is also logged. =head2 DDD over gdb Those debugging perl with the DDD frontend over gdb may find the following useful: You can extend the data conversion shortcuts menu, so for example you can display an SV's IV value with one click, without doing any typing. To do that simply edit ~/.ddd/init file and add after: ! Display shortcuts. Ddd*gdbDisplayShortcuts: \ /t () // Convert to Bin\n\ /d () // Convert to Dec\n\ /x () // Convert to Hex\n\ /o () // Convert to Oct(\n\ the following two lines: ((XPV*) (())->sv_any )->xpv_pv // 2pvx\n\ ((XPVIV*) (())->sv_any )->xiv_iv // 2ivx so now you can do ivx and pvx lookups or you can plug there the sv_peek "conversion": Perl_sv_peek(my_perl, (SV*)()) // sv_peek (The my_perl is for threaded builds.) Just remember that every line, but the last one, should end with \n\ Alternatively edit the init file interactively via: 3rd mouse button -> New Display -> Edit Menu Note: you can define up to 20 conversion shortcuts in the gdb section. =head2 C backtrace On some platforms Perl supports retrieving the C level backtrace (similar to what symbolic debuggers like gdb do). The backtrace returns the stack trace of the C call frames, with the symbol names (function names), the object names (like "perl"), and if it can, also the source code locations (file:line). The supported platforms are Linux, and OS X (some *BSD might work at least partly, but they have not yet been tested). This feature hasn't been tested with multiple threads, but it will only show the backtrace of the thread doing the backtracing. The feature needs to be enabled with C<Configure -Dusecbacktrace>. The C<-Dusecbacktrace> also enables keeping the debug information when compiling/linking (often: C<-g>). Many compilers/linkers do support having both optimization and keeping the debug information. The debug information is needed for the symbol names and the source locations. Static functions might not be visible for the backtrace. Source code locations, even if available, can often be missing or misleading if the compiler has e.g. inlined code. Optimizer can make matching the source code and the object code quite challenging. =over 4 =item Linux You B<must> have the BFD (-lbfd) library installed, otherwise C<perl> will fail to link. The BFD is usually distributed as part of the GNU binutils. Summary: C<Configure ... -Dusecbacktrace> and you need C<-lbfd>. =item OS X The source code locations are supported B<only> if you have the Developer Tools installed. (BFD is B<not> needed.) Summary: C<Configure ... -Dusecbacktrace> and installing the Developer Tools would be good. =back Optionally, for trying out the feature, you may want to enable automatic dumping of the backtrace just before a warning or croak (die) message is emitted, by adding C<-Accflags=-DUSE_C_BACKTRACE_ON_ERROR> for Configure. Unless the above additional feature is enabled, nothing about the backtrace functionality is visible, except for the Perl/XS level. Furthermore, even if you have enabled this feature to be compiled, you need to enable it in runtime with an environment variable: C<PERL_C_BACKTRACE_ON_ERROR=10>. It must be an integer higher than zero, telling the desired frame count. Retrieving the backtrace from Perl level (using for example an XS extension) would be much less exciting than one would hope: normally you would see C<runops>, C<entersub>, and not much else. This API is intended to be called B<from within> the Perl implementation, not from Perl level execution. The C API for the backtrace is as follows: =over 4 =item get_c_backtrace =item free_c_backtrace =item get_c_backtrace_dump =item dump_c_backtrace =back =head2 Poison If you see in a debugger a memory area mysteriously full of 0xABABABAB or 0xEFEFEFEF, you may be seeing the effect of the Poison() macros, see L<perlclib>. =head2 Read-only optrees Under ithreads the optree is read only. If you want to enforce this, to check for write accesses from buggy code, compile with C<-Accflags=-DPERL_DEBUG_READONLY_OPS> to enable code that allocates op memory via C<mmap>, and sets it read-only when it is attached to a subroutine. Any write access to an op results in a C<SIGBUS> and abort. This code is intended for development only, and may not be portable even to all Unix variants. Also, it is an 80% solution, in that it isn't able to make all ops read only. Specifically it does not apply to op slabs belonging to C<BEGIN> blocks. However, as an 80% solution it is still effective, as it has caught bugs in the past. =head2 When is a bool not a bool? On pre-C99 compilers, C<bool> is defined as equivalent to C<char>. Consequently assignment of any larger type to a C<bool> is unsafe and may be truncated. The C<cBOOL> macro exists to cast it correctly; you may also find that using it is shorter and clearer than writing out the equivalent conditional expression longhand. On those platforms and compilers where C<bool> really is a boolean (C++, C99), it is easy to forget the cast. You can force C<bool> to be a C<char> by compiling with C<-Accflags=-DPERL_BOOL_AS_CHAR>. You may also wish to run C<Configure> with something like -Accflags='-Wconversion -Wno-sign-conversion -Wno-shorten-64-to-32' or your compiler's equivalent to make it easier to spot any unsafe truncations that show up. The C<TRUE> and C<FALSE> macros are available for situations where using them would clarify intent. (But they always just mean the same as the integers 1 and 0 regardless, so using them isn't compulsory.) =head2 The .i Targets You can expand the macros in a F<foo.c> file by saying make foo.i which will expand the macros using cpp. Don't be scared by the results. =head1 AUTHOR This document was originally written by Nathan Torkington, and is maintained by the perl5-porters mailing list. perlembed.pod 0000644 00000111301 15125556335 0007216 0 ustar 00 =head1 NAME perlembed - how to embed perl in your C program =head1 DESCRIPTION =head2 PREAMBLE Do you want to: =over 5 =item B<Use C from Perl?> Read L<perlxstut>, L<perlxs>, L<h2xs>, L<perlguts>, and L<perlapi>. =item B<Use a Unix program from Perl?> Read about back-quotes and about C<system> and C<exec> in L<perlfunc>. =item B<Use Perl from Perl?> Read about L<perlfunc/do> and L<perlfunc/eval> and L<perlfunc/require> and L<perlfunc/use>. =item B<Use C from C?> Rethink your design. =item B<Use Perl from C?> Read on... =back =head2 ROADMAP =over 5 =item * Compiling your C program =item * Adding a Perl interpreter to your C program =item * Calling a Perl subroutine from your C program =item * Evaluating a Perl statement from your C program =item * Performing Perl pattern matches and substitutions from your C program =item * Fiddling with the Perl stack from your C program =item * Maintaining a persistent interpreter =item * Maintaining multiple interpreter instances =item * Using Perl modules, which themselves use C libraries, from your C program =item * Embedding Perl under Win32 =back =head2 Compiling your C program If you have trouble compiling the scripts in this documentation, you're not alone. The cardinal rule: COMPILE THE PROGRAMS IN EXACTLY THE SAME WAY THAT YOUR PERL WAS COMPILED. (Sorry for yelling.) Also, every C program that uses Perl must link in the I<perl library>. What's that, you ask? Perl is itself written in C; the perl library is the collection of compiled C programs that were used to create your perl executable (I</usr/bin/perl> or equivalent). (Corollary: you can't use Perl from your C program unless Perl has been compiled on your machine, or installed properly--that's why you shouldn't blithely copy Perl executables from machine to machine without also copying the I<lib> directory.) When you use Perl from C, your C program will--usually--allocate, "run", and deallocate a I<PerlInterpreter> object, which is defined by the perl library. If your copy of Perl is recent enough to contain this documentation (version 5.002 or later), then the perl library (and I<EXTERN.h> and I<perl.h>, which you'll also need) will reside in a directory that looks like this: /usr/local/lib/perl5/your_architecture_here/CORE or perhaps just /usr/local/lib/perl5/CORE or maybe something like /usr/opt/perl5/CORE Execute this statement for a hint about where to find CORE: perl -MConfig -e 'print $Config{archlib}' Here's how you'd compile the example in the next section, L</Adding a Perl interpreter to your C program>, on my Linux box: % gcc -O2 -Dbool=char -DHAS_BOOL -I/usr/local/include -I/usr/local/lib/perl5/i586-linux/5.003/CORE -L/usr/local/lib/perl5/i586-linux/5.003/CORE -o interp interp.c -lperl -lm (That's all one line.) On my DEC Alpha running old 5.003_05, the incantation is a bit different: % cc -O2 -Olimit 2900 -I/usr/local/include -I/usr/local/lib/perl5/alpha-dec_osf/5.00305/CORE -L/usr/local/lib/perl5/alpha-dec_osf/5.00305/CORE -L/usr/local/lib -D__LANGUAGE_C__ -D_NO_PROTO -o interp interp.c -lperl -lm How can you figure out what to add? Assuming your Perl is post-5.001, execute a C<perl -V> command and pay special attention to the "cc" and "ccflags" information. You'll have to choose the appropriate compiler (I<cc>, I<gcc>, et al.) for your machine: C<perl -MConfig -e 'print $Config{cc}'> will tell you what to use. You'll also have to choose the appropriate library directory (I</usr/local/lib/...>) for your machine. If your compiler complains that certain functions are undefined, or that it can't locate I<-lperl>, then you need to change the path following the C<-L>. If it complains that it can't find I<EXTERN.h> and I<perl.h>, you need to change the path following the C<-I>. You may have to add extra libraries as well. Which ones? Perhaps those printed by perl -MConfig -e 'print $Config{libs}' Provided your perl binary was properly configured and installed the B<ExtUtils::Embed> module will determine all of this information for you: % cc -o interp interp.c `perl -MExtUtils::Embed -e ccopts -e ldopts` If the B<ExtUtils::Embed> module isn't part of your Perl distribution, you can retrieve it from L<https://metacpan.org/pod/ExtUtils::Embed> (If this documentation came from your Perl distribution, then you're running 5.004 or better and you already have it.) The B<ExtUtils::Embed> kit on CPAN also contains all source code for the examples in this document, tests, additional examples and other information you may find useful. =head2 Adding a Perl interpreter to your C program In a sense, perl (the C program) is a good example of embedding Perl (the language), so I'll demonstrate embedding with I<miniperlmain.c>, included in the source distribution. Here's a bastardized, non-portable version of I<miniperlmain.c> containing the essentials of embedding: #include <EXTERN.h> /* from the Perl distribution */ #include <perl.h> /* from the Perl distribution */ static PerlInterpreter *my_perl; /*** The Perl interpreter ***/ int main(int argc, char **argv, char **env) { PERL_SYS_INIT3(&argc,&argv,&env); my_perl = perl_alloc(); perl_construct(my_perl); PL_exit_flags |= PERL_EXIT_DESTRUCT_END; perl_parse(my_perl, NULL, argc, argv, (char **)NULL); perl_run(my_perl); perl_destruct(my_perl); perl_free(my_perl); PERL_SYS_TERM(); exit(EXIT_SUCCESS); } Notice that we don't use the C<env> pointer. Normally handed to C<perl_parse> as its final argument, C<env> here is replaced by C<NULL>, which means that the current environment will be used. The macros PERL_SYS_INIT3() and PERL_SYS_TERM() provide system-specific tune up of the C runtime environment necessary to run Perl interpreters; they should only be called once regardless of how many interpreters you create or destroy. Call PERL_SYS_INIT3() before you create your first interpreter, and PERL_SYS_TERM() after you free your last interpreter. Since PERL_SYS_INIT3() may change C<env>, it may be more appropriate to provide C<env> as an argument to perl_parse(). Also notice that no matter what arguments you pass to perl_parse(), PERL_SYS_INIT3() must be invoked on the C main() argc, argv and env and only once. Mind that argv[argc] must be NULL, same as those passed to a main function in C. Now compile this program (I'll call it I<interp.c>) into an executable: % cc -o interp interp.c `perl -MExtUtils::Embed -e ccopts -e ldopts` After a successful compilation, you'll be able to use I<interp> just like perl itself: % interp print "Pretty Good Perl \n"; print "10890 - 9801 is ", 10890 - 9801; <CTRL-D> Pretty Good Perl 10890 - 9801 is 1089 or % interp -e 'printf("%x", 3735928559)' deadbeef You can also read and execute Perl statements from a file while in the midst of your C program, by placing the filename in I<argv[1]> before calling I<perl_run>. =head2 Calling a Perl subroutine from your C program To call individual Perl subroutines, you can use any of the B<call_*> functions documented in L<perlcall>. In this example we'll use C<call_argv>. That's shown below, in a program I'll call I<showtime.c>. #include <EXTERN.h> #include <perl.h> static PerlInterpreter *my_perl; int main(int argc, char **argv, char **env) { char *args[] = { NULL }; PERL_SYS_INIT3(&argc,&argv,&env); my_perl = perl_alloc(); perl_construct(my_perl); perl_parse(my_perl, NULL, argc, argv, NULL); PL_exit_flags |= PERL_EXIT_DESTRUCT_END; /*** skipping perl_run() ***/ call_argv("showtime", G_DISCARD | G_NOARGS, args); perl_destruct(my_perl); perl_free(my_perl); PERL_SYS_TERM(); exit(EXIT_SUCCESS); } where I<showtime> is a Perl subroutine that takes no arguments (that's the I<G_NOARGS>) and for which I'll ignore the return value (that's the I<G_DISCARD>). Those flags, and others, are discussed in L<perlcall>. I'll define the I<showtime> subroutine in a file called I<showtime.pl>: print "I shan't be printed."; sub showtime { print time; } Simple enough. Now compile and run: % cc -o showtime showtime.c \ `perl -MExtUtils::Embed -e ccopts -e ldopts` % showtime showtime.pl 818284590 yielding the number of seconds that elapsed between January 1, 1970 (the beginning of the Unix epoch), and the moment I began writing this sentence. In this particular case we don't have to call I<perl_run>, as we set the PL_exit_flag PERL_EXIT_DESTRUCT_END which executes END blocks in perl_destruct. If you want to pass arguments to the Perl subroutine, you can add strings to the C<NULL>-terminated C<args> list passed to I<call_argv>. For other data types, or to examine return values, you'll need to manipulate the Perl stack. That's demonstrated in L</Fiddling with the Perl stack from your C program>. =head2 Evaluating a Perl statement from your C program Perl provides two API functions to evaluate pieces of Perl code. These are L<perlapi/eval_sv> and L<perlapi/eval_pv>. Arguably, these are the only routines you'll ever need to execute snippets of Perl code from within your C program. Your code can be as long as you wish; it can contain multiple statements; it can employ L<perlfunc/use>, L<perlfunc/require>, and L<perlfunc/do> to include external Perl files. I<eval_pv> lets us evaluate individual Perl strings, and then extract variables for coercion into C types. The following program, I<string.c>, executes three Perl strings, extracting an C<int> from the first, a C<float> from the second, and a C<char *> from the third. #include <EXTERN.h> #include <perl.h> static PerlInterpreter *my_perl; main (int argc, char **argv, char **env) { char *embedding[] = { "", "-e", "0", NULL }; PERL_SYS_INIT3(&argc,&argv,&env); my_perl = perl_alloc(); perl_construct( my_perl ); perl_parse(my_perl, NULL, 3, embedding, NULL); PL_exit_flags |= PERL_EXIT_DESTRUCT_END; perl_run(my_perl); /** Treat $a as an integer **/ eval_pv("$a = 3; $a **= 2", TRUE); printf("a = %d\n", SvIV(get_sv("a", 0))); /** Treat $a as a float **/ eval_pv("$a = 3.14; $a **= 2", TRUE); printf("a = %f\n", SvNV(get_sv("a", 0))); /** Treat $a as a string **/ eval_pv( "$a = 'rekcaH lreP rehtonA tsuJ'; $a = reverse($a);", TRUE); printf("a = %s\n", SvPV_nolen(get_sv("a", 0))); perl_destruct(my_perl); perl_free(my_perl); PERL_SYS_TERM(); } All of those strange functions with I<sv> in their names help convert Perl scalars to C types. They're described in L<perlguts> and L<perlapi>. If you compile and run I<string.c>, you'll see the results of using I<SvIV()> to create an C<int>, I<SvNV()> to create a C<float>, and I<SvPV()> to create a string: a = 9 a = 9.859600 a = Just Another Perl Hacker In the example above, we've created a global variable to temporarily store the computed value of our eval'ed expression. It is also possible and in most cases a better strategy to fetch the return value from I<eval_pv()> instead. Example: ... SV *val = eval_pv("reverse 'rekcaH lreP rehtonA tsuJ'", TRUE); printf("%s\n", SvPV_nolen(val)); ... This way, we avoid namespace pollution by not creating global variables and we've simplified our code as well. =head2 Performing Perl pattern matches and substitutions from your C program The I<eval_sv()> function lets us evaluate strings of Perl code, so we can define some functions that use it to "specialize" in matches and substitutions: I<match()>, I<substitute()>, and I<matches()>. I32 match(SV *string, char *pattern); Given a string and a pattern (e.g., C<m/clasp/> or C</\b\w*\b/>, which in your C program might appear as "/\\b\\w*\\b/"), match() returns 1 if the string matches the pattern and 0 otherwise. int substitute(SV **string, char *pattern); Given a pointer to an C<SV> and an C<=~> operation (e.g., C<s/bob/robert/g> or C<tr[A-Z][a-z]>), substitute() modifies the string within the C<SV> as according to the operation, returning the number of substitutions made. SSize_t matches(SV *string, char *pattern, AV **matches); Given an C<SV>, a pattern, and a pointer to an empty C<AV>, matches() evaluates C<$string =~ $pattern> in a list context, and fills in I<matches> with the array elements, returning the number of matches found. Here's a sample program, I<match.c>, that uses all three (long lines have been wrapped here): #include <EXTERN.h> #include <perl.h> static PerlInterpreter *my_perl; /** my_eval_sv(code, error_check) ** kinda like eval_sv(), ** but we pop the return value off the stack **/ SV* my_eval_sv(SV *sv, I32 croak_on_error) { dSP; SV* retval; PUSHMARK(SP); eval_sv(sv, G_SCALAR); SPAGAIN; retval = POPs; PUTBACK; if (croak_on_error && SvTRUE(ERRSV)) croak_sv(ERRSV); return retval; } /** match(string, pattern) ** ** Used for matches in a scalar context. ** ** Returns 1 if the match was successful; 0 otherwise. **/ I32 match(SV *string, char *pattern) { SV *command = newSV(0), *retval; sv_setpvf(command, "my $string = '%s'; $string =~ %s", SvPV_nolen(string), pattern); retval = my_eval_sv(command, TRUE); SvREFCNT_dec(command); return SvIV(retval); } /** substitute(string, pattern) ** ** Used for =~ operations that ** modify their left-hand side (s/// and tr///) ** ** Returns the number of successful matches, and ** modifies the input string if there were any. **/ I32 substitute(SV **string, char *pattern) { SV *command = newSV(0), *retval; sv_setpvf(command, "$string = '%s'; ($string =~ %s)", SvPV_nolen(*string), pattern); retval = my_eval_sv(command, TRUE); SvREFCNT_dec(command); *string = get_sv("string", 0); return SvIV(retval); } /** matches(string, pattern, matches) ** ** Used for matches in a list context. ** ** Returns the number of matches, ** and fills in **matches with the matching substrings **/ SSize_t matches(SV *string, char *pattern, AV **match_list) { SV *command = newSV(0); SSize_t num_matches; sv_setpvf(command, "my $string = '%s'; @array = ($string =~ %s)", SvPV_nolen(string), pattern); my_eval_sv(command, TRUE); SvREFCNT_dec(command); *match_list = get_av("array", 0); num_matches = av_top_index(*match_list) + 1; return num_matches; } main (int argc, char **argv, char **env) { char *embedding[] = { "", "-e", "0", NULL }; AV *match_list; I32 num_matches, i; SV *text; PERL_SYS_INIT3(&argc,&argv,&env); my_perl = perl_alloc(); perl_construct(my_perl); perl_parse(my_perl, NULL, 3, embedding, NULL); PL_exit_flags |= PERL_EXIT_DESTRUCT_END; text = newSV(0); sv_setpv(text, "When he is at a convenience store and the " "bill comes to some amount like 76 cents, Maynard is " "aware that there is something he *should* do, something " "that will enable him to get back a quarter, but he has " "no idea *what*. He fumbles through his red squeezey " "changepurse and gives the boy three extra pennies with " "his dollar, hoping that he might luck into the correct " "amount. The boy gives him back two of his own pennies " "and then the big shiny quarter that is his prize. " "-RICHH"); if (match(text, "m/quarter/")) /** Does text contain 'quarter'? **/ printf("match: Text contains the word 'quarter'.\n\n"); else printf("match: Text doesn't contain the word 'quarter'.\n\n"); if (match(text, "m/eighth/")) /** Does text contain 'eighth'? **/ printf("match: Text contains the word 'eighth'.\n\n"); else printf("match: Text doesn't contain the word 'eighth'.\n\n"); /** Match all occurrences of /wi../ **/ num_matches = matches(text, "m/(wi..)/g", &match_list); printf("matches: m/(wi..)/g found %d matches...\n", num_matches); for (i = 0; i < num_matches; i++) printf("match: %s\n", SvPV_nolen(*av_fetch(match_list, i, FALSE))); printf("\n"); /** Remove all vowels from text **/ num_matches = substitute(&text, "s/[aeiou]//gi"); if (num_matches) { printf("substitute: s/[aeiou]//gi...%lu substitutions made.\n", (unsigned long)num_matches); printf("Now text is: %s\n\n", SvPV_nolen(text)); } /** Attempt a substitution **/ if (!substitute(&text, "s/Perl/C/")) { printf("substitute: s/Perl/C...No substitution made.\n\n"); } SvREFCNT_dec(text); PL_perl_destruct_level = 1; perl_destruct(my_perl); perl_free(my_perl); PERL_SYS_TERM(); } which produces the output (again, long lines have been wrapped here) match: Text contains the word 'quarter'. match: Text doesn't contain the word 'eighth'. matches: m/(wi..)/g found 2 matches... match: will match: with substitute: s/[aeiou]//gi...139 substitutions made. Now text is: Whn h s t cnvnnc str nd th bll cms t sm mnt lk 76 cnts, Mynrd s wr tht thr s smthng h *shld* d, smthng tht wll nbl hm t gt bck qrtr, bt h hs n d *wht*. H fmbls thrgh hs rd sqzy chngprs nd gvs th by thr xtr pnns wth hs dllr, hpng tht h mght lck nt th crrct mnt. Th by gvs hm bck tw f hs wn pnns nd thn th bg shny qrtr tht s hs prz. -RCHH substitute: s/Perl/C...No substitution made. =head2 Fiddling with the Perl stack from your C program When trying to explain stacks, most computer science textbooks mumble something about spring-loaded columns of cafeteria plates: the last thing you pushed on the stack is the first thing you pop off. That'll do for our purposes: your C program will push some arguments onto "the Perl stack", shut its eyes while some magic happens, and then pop the results--the return value of your Perl subroutine--off the stack. First you'll need to know how to convert between C types and Perl types, with newSViv() and sv_setnv() and newAV() and all their friends. They're described in L<perlguts> and L<perlapi>. Then you'll need to know how to manipulate the Perl stack. That's described in L<perlcall>. Once you've understood those, embedding Perl in C is easy. Because C has no builtin function for integer exponentiation, let's make Perl's ** operator available to it (this is less useful than it sounds, because Perl implements ** with C's I<pow()> function). First I'll create a stub exponentiation function in I<power.pl>: sub expo { my ($a, $b) = @_; return $a ** $b; } Now I'll create a C program, I<power.c>, with a function I<PerlPower()> that contains all the perlguts necessary to push the two arguments into I<expo()> and to pop the return value out. Take a deep breath... #include <EXTERN.h> #include <perl.h> static PerlInterpreter *my_perl; static void PerlPower(int a, int b) { dSP; /* initialize stack pointer */ ENTER; /* everything created after here */ SAVETMPS; /* ...is a temporary variable. */ PUSHMARK(SP); /* remember the stack pointer */ XPUSHs(sv_2mortal(newSViv(a))); /* push the base onto the stack */ XPUSHs(sv_2mortal(newSViv(b))); /* push the exponent onto stack */ PUTBACK; /* make local stack pointer global */ call_pv("expo", G_SCALAR); /* call the function */ SPAGAIN; /* refresh stack pointer */ /* pop the return value from stack */ printf ("%d to the %dth power is %d.\n", a, b, POPi); PUTBACK; FREETMPS; /* free that return value */ LEAVE; /* ...and the XPUSHed "mortal" args.*/ } int main (int argc, char **argv, char **env) { char *my_argv[] = { "", "power.pl", NULL }; PERL_SYS_INIT3(&argc,&argv,&env); my_perl = perl_alloc(); perl_construct( my_perl ); perl_parse(my_perl, NULL, 2, my_argv, (char **)NULL); PL_exit_flags |= PERL_EXIT_DESTRUCT_END; perl_run(my_perl); PerlPower(3, 4); /*** Compute 3 ** 4 ***/ perl_destruct(my_perl); perl_free(my_perl); PERL_SYS_TERM(); exit(EXIT_SUCCESS); } Compile and run: % cc -o power power.c `perl -MExtUtils::Embed -e ccopts -e ldopts` % power 3 to the 4th power is 81. =head2 Maintaining a persistent interpreter When developing interactive and/or potentially long-running applications, it's a good idea to maintain a persistent interpreter rather than allocating and constructing a new interpreter multiple times. The major reason is speed: since Perl will only be loaded into memory once. However, you have to be more cautious with namespace and variable scoping when using a persistent interpreter. In previous examples we've been using global variables in the default package C<main>. We knew exactly what code would be run, and assumed we could avoid variable collisions and outrageous symbol table growth. Let's say your application is a server that will occasionally run Perl code from some arbitrary file. Your server has no way of knowing what code it's going to run. Very dangerous. If the file is pulled in by C<perl_parse()>, compiled into a newly constructed interpreter, and subsequently cleaned out with C<perl_destruct()> afterwards, you're shielded from most namespace troubles. One way to avoid namespace collisions in this scenario is to translate the filename into a guaranteed-unique package name, and then compile the code into that package using L<perlfunc/eval>. In the example below, each file will only be compiled once. Or, the application might choose to clean out the symbol table associated with the file after it's no longer needed. Using L<perlapi/call_argv>, We'll call the subroutine C<Embed::Persistent::eval_file> which lives in the file C<persistent.pl> and pass the filename and boolean cleanup/cache flag as arguments. Note that the process will continue to grow for each file that it uses. In addition, there might be C<AUTOLOAD>ed subroutines and other conditions that cause Perl's symbol table to grow. You might want to add some logic that keeps track of the process size, or restarts itself after a certain number of requests, to ensure that memory consumption is minimized. You'll also want to scope your variables with L<perlfunc/my> whenever possible. package Embed::Persistent; #persistent.pl use strict; our %Cache; use Symbol qw(delete_package); sub valid_package_name { my($string) = @_; $string =~ s/([^A-Za-z0-9\/])/sprintf("_%2x",unpack("C",$1))/eg; # second pass only for words starting with a digit $string =~ s|/(\d)|sprintf("/_%2x",unpack("C",$1))|eg; # Dress it up as a real package name $string =~ s|/|::|g; return "Embed" . $string; } sub eval_file { my($filename, $delete) = @_; my $package = valid_package_name($filename); my $mtime = -M $filename; if(defined $Cache{$package}{mtime} && $Cache{$package}{mtime} <= $mtime) { # we have compiled this subroutine already, # it has not been updated on disk, nothing left to do print STDERR "already compiled $package->handler\n"; } else { local *FH; open FH, $filename or die "open '$filename' $!"; local($/) = undef; my $sub = <FH>; close FH; #wrap the code into a subroutine inside our unique package my $eval = qq{package $package; sub handler { $sub; }}; { # hide our variables within this block my($filename,$mtime,$package,$sub); eval $eval; } die $@ if $@; #cache it unless we're cleaning out each time $Cache{$package}{mtime} = $mtime unless $delete; } eval {$package->handler;}; die $@ if $@; delete_package($package) if $delete; #take a look if you want #print Devel::Symdump->rnew($package)->as_string, $/; } 1; __END__ /* persistent.c */ #include <EXTERN.h> #include <perl.h> /* 1 = clean out filename's symbol table after each request, 0 = don't */ #ifndef DO_CLEAN #define DO_CLEAN 0 #endif #define BUFFER_SIZE 1024 static PerlInterpreter *my_perl = NULL; int main(int argc, char **argv, char **env) { char *embedding[] = { "", "persistent.pl", NULL }; char *args[] = { "", DO_CLEAN, NULL }; char filename[BUFFER_SIZE]; int failing, exitstatus; PERL_SYS_INIT3(&argc,&argv,&env); if((my_perl = perl_alloc()) == NULL) { fprintf(stderr, "no memory!"); exit(EXIT_FAILURE); } perl_construct(my_perl); PL_origalen = 1; /* don't let $0 assignment update the proctitle or embedding[0] */ failing = perl_parse(my_perl, NULL, 2, embedding, NULL); PL_exit_flags |= PERL_EXIT_DESTRUCT_END; if(!failing) failing = perl_run(my_perl); if(!failing) { while(printf("Enter file name: ") && fgets(filename, BUFFER_SIZE, stdin)) { filename[strlen(filename)-1] = '\0'; /* strip \n */ /* call the subroutine, passing it the filename as an argument */ args[0] = filename; call_argv("Embed::Persistent::eval_file", G_DISCARD | G_EVAL, args); /* check $@ */ if(SvTRUE(ERRSV)) fprintf(stderr, "eval error: %s\n", SvPV_nolen(ERRSV)); } } PL_perl_destruct_level = 0; exitstatus = perl_destruct(my_perl); perl_free(my_perl); PERL_SYS_TERM(); exit(exitstatus); } Now compile: % cc -o persistent persistent.c \ `perl -MExtUtils::Embed -e ccopts -e ldopts` Here's an example script file: #test.pl my $string = "hello"; foo($string); sub foo { print "foo says: @_\n"; } Now run: % persistent Enter file name: test.pl foo says: hello Enter file name: test.pl already compiled Embed::test_2epl->handler foo says: hello Enter file name: ^C =head2 Execution of END blocks Traditionally END blocks have been executed at the end of the perl_run. This causes problems for applications that never call perl_run. Since perl 5.7.2 you can specify C<PL_exit_flags |= PERL_EXIT_DESTRUCT_END> to get the new behaviour. This also enables the running of END blocks if the perl_parse fails and C<perl_destruct> will return the exit value. =head2 $0 assignments When a perl script assigns a value to $0 then the perl runtime will try to make this value show up as the program name reported by "ps" by updating the memory pointed to by the argv passed to perl_parse() and also calling API functions like setproctitle() where available. This behaviour might not be appropriate when embedding perl and can be disabled by assigning the value C<1> to the variable C<PL_origalen> before perl_parse() is called. The F<persistent.c> example above is for instance likely to segfault when $0 is assigned to if the C<PL_origalen = 1;> assignment is removed. This because perl will try to write to the read only memory of the C<embedding[]> strings. =head2 Maintaining multiple interpreter instances Some rare applications will need to create more than one interpreter during a session. Such an application might sporadically decide to release any resources associated with the interpreter. The program must take care to ensure that this takes place I<before> the next interpreter is constructed. By default, when perl is not built with any special options, the global variable C<PL_perl_destruct_level> is set to C<0>, since extra cleaning isn't usually needed when a program only ever creates a single interpreter in its entire lifetime. Setting C<PL_perl_destruct_level> to C<1> makes everything squeaky clean: while(1) { ... /* reset global variables here with PL_perl_destruct_level = 1 */ PL_perl_destruct_level = 1; perl_construct(my_perl); ... /* clean and reset _everything_ during perl_destruct */ PL_perl_destruct_level = 1; perl_destruct(my_perl); perl_free(my_perl); ... /* let's go do it again! */ } When I<perl_destruct()> is called, the interpreter's syntax parse tree and symbol tables are cleaned up, and global variables are reset. The second assignment to C<PL_perl_destruct_level> is needed because perl_construct resets it to C<0>. Now suppose we have more than one interpreter instance running at the same time. This is feasible, but only if you used the Configure option C<-Dusemultiplicity> or the options C<-Dusethreads -Duseithreads> when building perl. By default, enabling one of these Configure options sets the per-interpreter global variable C<PL_perl_destruct_level> to C<1>, so that thorough cleaning is automatic and interpreter variables are initialized correctly. Even if you don't intend to run two or more interpreters at the same time, but to run them sequentially, like in the above example, it is recommended to build perl with the C<-Dusemultiplicity> option otherwise some interpreter variables may not be initialized correctly between consecutive runs and your application may crash. See also L<perlxs/Thread-aware system interfaces>. Using C<-Dusethreads -Duseithreads> rather than C<-Dusemultiplicity> is more appropriate if you intend to run multiple interpreters concurrently in different threads, because it enables support for linking in the thread libraries of your system with the interpreter. Let's give it a try: #include <EXTERN.h> #include <perl.h> /* we're going to embed two interpreters */ #define SAY_HELLO "-e", "print qq(Hi, I'm $^X\n)" int main(int argc, char **argv, char **env) { PerlInterpreter *one_perl, *two_perl; char *one_args[] = { "one_perl", SAY_HELLO, NULL }; char *two_args[] = { "two_perl", SAY_HELLO, NULL }; PERL_SYS_INIT3(&argc,&argv,&env); one_perl = perl_alloc(); two_perl = perl_alloc(); PERL_SET_CONTEXT(one_perl); perl_construct(one_perl); PERL_SET_CONTEXT(two_perl); perl_construct(two_perl); PERL_SET_CONTEXT(one_perl); perl_parse(one_perl, NULL, 3, one_args, (char **)NULL); PERL_SET_CONTEXT(two_perl); perl_parse(two_perl, NULL, 3, two_args, (char **)NULL); PERL_SET_CONTEXT(one_perl); perl_run(one_perl); PERL_SET_CONTEXT(two_perl); perl_run(two_perl); PERL_SET_CONTEXT(one_perl); perl_destruct(one_perl); PERL_SET_CONTEXT(two_perl); perl_destruct(two_perl); PERL_SET_CONTEXT(one_perl); perl_free(one_perl); PERL_SET_CONTEXT(two_perl); perl_free(two_perl); PERL_SYS_TERM(); exit(EXIT_SUCCESS); } Note the calls to PERL_SET_CONTEXT(). These are necessary to initialize the global state that tracks which interpreter is the "current" one on the particular process or thread that may be running it. It should always be used if you have more than one interpreter and are making perl API calls on both interpreters in an interleaved fashion. PERL_SET_CONTEXT(interp) should also be called whenever C<interp> is used by a thread that did not create it (using either perl_alloc(), or the more esoteric perl_clone()). Compile as usual: % cc -o multiplicity multiplicity.c \ `perl -MExtUtils::Embed -e ccopts -e ldopts` Run it, Run it: % multiplicity Hi, I'm one_perl Hi, I'm two_perl =head2 Using Perl modules, which themselves use C libraries, from your C program If you've played with the examples above and tried to embed a script that I<use()>s a Perl module (such as I<Socket>) which itself uses a C or C++ library, this probably happened: Can't load module Socket, dynamic loading not available in this perl. (You may need to build a new perl executable which either supports dynamic loading or has the Socket module statically linked into it.) What's wrong? Your interpreter doesn't know how to communicate with these extensions on its own. A little glue will help. Up until now you've been calling I<perl_parse()>, handing it NULL for the second argument: perl_parse(my_perl, NULL, argc, my_argv, NULL); That's where the glue code can be inserted to create the initial contact between Perl and linked C/C++ routines. Let's take a look some pieces of I<perlmain.c> to see how Perl does this: static void xs_init (pTHX); EXTERN_C void boot_DynaLoader (pTHX_ CV* cv); EXTERN_C void boot_Socket (pTHX_ CV* cv); EXTERN_C void xs_init(pTHX) { char *file = __FILE__; /* DynaLoader is a special case */ newXS("DynaLoader::boot_DynaLoader", boot_DynaLoader, file); newXS("Socket::bootstrap", boot_Socket, file); } Simply put: for each extension linked with your Perl executable (determined during its initial configuration on your computer or when adding a new extension), a Perl subroutine is created to incorporate the extension's routines. Normally, that subroutine is named I<Module::bootstrap()> and is invoked when you say I<use Module>. In turn, this hooks into an XSUB, I<boot_Module>, which creates a Perl counterpart for each of the extension's XSUBs. Don't worry about this part; leave that to the I<xsubpp> and extension authors. If your extension is dynamically loaded, DynaLoader creates I<Module::bootstrap()> for you on the fly. In fact, if you have a working DynaLoader then there is rarely any need to link in any other extensions statically. Once you have this code, slap it into the second argument of I<perl_parse()>: perl_parse(my_perl, xs_init, argc, my_argv, NULL); Then compile: % cc -o interp interp.c `perl -MExtUtils::Embed -e ccopts -e ldopts` % interp use Socket; use SomeDynamicallyLoadedModule; print "Now I can use extensions!\n"' B<ExtUtils::Embed> can also automate writing the I<xs_init> glue code. % perl -MExtUtils::Embed -e xsinit -- -o perlxsi.c % cc -c perlxsi.c `perl -MExtUtils::Embed -e ccopts` % cc -c interp.c `perl -MExtUtils::Embed -e ccopts` % cc -o interp perlxsi.o interp.o `perl -MExtUtils::Embed -e ldopts` Consult L<perlxs>, L<perlguts>, and L<perlapi> for more details. =head2 Using embedded Perl with POSIX locales (See L<perllocale> for information about these.) When a Perl interpreter normally starts up, it tells the system it wants to use the system's default locale. This is often, but not necessarily, the "C" or "POSIX" locale. Absent a S<C<"use locale">> within the perl code, this mostly has no effect (but see L<perllocale/Not within the scope of "use locale">). Also, there is not a problem if the locale you want to use in your embedded perl is the same as the system default. However, this doesn't work if you have set up and want to use a locale that isn't the system default one. Starting in Perl v5.20, you can tell the embedded Perl interpreter that the locale is already properly set up, and to skip doing its own normal initialization. It skips if the environment variable C<PERL_SKIP_LOCALE_INIT> is set (even if set to 0 or C<"">). A perl that has this capability will define the C pre-processor symbol C<HAS_SKIP_LOCALE_INIT>. This allows code that has to work with multiple Perl versions to do some sort of work-around when confronted with an earlier Perl. If your program is using the POSIX 2008 multi-thread locale functionality, you should switch into the global locale and set that up properly before starting the Perl interpreter. It will then properly switch back to using the thread-safe functions. =head1 Hiding Perl_ If you completely hide the short forms of the Perl public API, add -DPERL_NO_SHORT_NAMES to the compilation flags. This means that for example instead of writing warn("%d bottles of beer on the wall", bottlecount); you will have to write the explicit full form Perl_warn(aTHX_ "%d bottles of beer on the wall", bottlecount); (See L<perlguts/"Background and PERL_IMPLICIT_CONTEXT"> for the explanation of the C<aTHX_>. ) Hiding the short forms is very useful for avoiding all sorts of nasty (C preprocessor or otherwise) conflicts with other software packages (Perl defines about 2400 APIs with these short names, take or leave few hundred, so there certainly is room for conflict.) =head1 MORAL You can sometimes I<write faster code> in C, but you can always I<write code faster> in Perl. Because you can use each from the other, combine them as you wish. =head1 AUTHOR Jon Orwant <F<orwant@media.mit.edu>> and Doug MacEachern <F<dougm@covalent.net>>, with small contributions from Tim Bunce, Tom Christiansen, Guy Decoux, Hallvard Furuseth, Dov Grobgeld, and Ilya Zakharevich. Doug MacEachern has an article on embedding in Volume 1, Issue 4 of The Perl Journal ( L<http://www.tpj.com/> ). Doug is also the developer of the most widely-used Perl embedding: the mod_perl system (perl.apache.org), which embeds Perl in the Apache web server. Oracle, Binary Evolution, ActiveState, and Ben Sugars's nsapi_perl have used this model for Oracle, Netscape and Internet Information Server Perl plugins. =head1 COPYRIGHT Copyright (C) 1995, 1996, 1997, 1998 Doug MacEachern and Jon Orwant. All Rights Reserved. This document may be distributed under the same terms as Perl itself. perl5221delta.pod 0000644 00000025017 15125556335 0007555 0 ustar 00 =encoding utf8 =head1 NAME perl5221delta - what is new for perl v5.22.1 =head1 DESCRIPTION This document describes differences between the 5.22.0 release and the 5.22.1 release. If you are upgrading from an earlier release such as 5.20.0, first read L<perl5220delta>, which describes differences between 5.20.0 and 5.22.0. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.20.0 other than the following single exception, which we deemed to be a sensible change to make in order to get the new C<\b{wb}> and (in particular) C<\b{sb}> features sane before people decided they're worthless because of bugs in their Perl 5.22.0 implementation and avoided them in the future. If any others exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head2 Bounds Checking Constructs Several bugs, including a segmentation fault, have been fixed with the bounds checking constructs (introduced in Perl 5.22) C<\b{gcb}>, C<\b{sb}>, C<\b{wb}>, C<\B{gcb}>, C<\B{sb}>, and C<\B{wb}>. All the C<\B{}> ones now match an empty string; none of the C<\b{}> ones do. L<[perl #126319]|https://rt.perl.org/Ticket/Display.html?id=126319> =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<Module::CoreList> has been upgraded from version 5.20150520 to 5.20151213. =item * L<PerlIO::scalar> has been upgraded from version 0.22 to 0.23. =item * L<POSIX> has been upgraded from version 1.53 to 1.53_01. If C<POSIX::strerror> was passed C<$!> as its argument then it accidentally cleared C<$!>. This has been fixed. L<[perl #126229]|https://rt.perl.org/Ticket/Display.html?id=126229> =item * L<Storable> has been upgraded from version 2.53 to 2.53_01. =item * L<warnings> has been upgraded from version 1.32 to 1.34. The C<warnings::enabled> example now actually uses C<warnings::enabled>. L<[perl #126051]|https://rt.perl.org/Ticket/Display.html?id=126051> =item * L<Win32> has been upgraded from version 0.51 to 0.52. This has been updated for Windows 8.1, 10 and 2012 R2 Server. =back =head1 Documentation =head2 Changes to Existing Documentation =head3 L<perltie> =over 4 =item * The usage of C<FIRSTKEY> and C<NEXTKEY> has been clarified. =back =head3 L<perlvar> =over 4 =item * The specific true value of C<$!{E...}> is now documented, noting that it is subject to change and not guaranteed. =back =head1 Diagnostics The following additions or changes have been made to diagnostic output, including warnings and fatal error messages. For the complete list of diagnostic messages, see L<perldiag>. =head2 Changes to Existing Diagnostics =over 4 =item * The C<printf> and C<sprintf> builtins are now more careful about the warnings they emit: argument reordering now disables the "redundant argument" warning in all cases. L<[perl #125469]|https://rt.perl.org/Ticket/Display.html?id=125469> =back =head1 Configuration and Compilation =over 4 =item * Using the C<NO_HASH_SEED> define in combination with the default hash algorithm C<PERL_HASH_FUNC_ONE_AT_A_TIME_HARD> resulted in a fatal error while compiling the interpreter, since Perl 5.17.10. This has been fixed. =item * Configuring with ccflags containing quotes (e.g. C<< -Accflags='-DAPPLLIB_EXP=\"/usr/libperl\"' >>) was broken in Perl 5.22.0 but has now been fixed again. L<[perl #125314]|https://rt.perl.org/Ticket/Display.html?id=125314> =back =head1 Platform Support =head2 Platform-Specific Notes =over 4 =item IRIX =over =item * Under some circumstances IRIX stdio fgetc() and fread() set the errno to C<ENOENT>, which made no sense according to either IRIX or POSIX docs. Errno is now cleared in such cases. L<[perl #123977]|https://rt.perl.org/Ticket/Display.html?id=123977> =item * Problems when multiplying long doubles by infinity have been fixed. L<[perl #126396]|https://rt.perl.org/Ticket/Display.html?id=126396> =item * All tests pass now on IRIX with the default build configuration. =back =back =head1 Selected Bug Fixes =over 4 =item * C<qr/(?[ () ])/> no longer segfaults, giving a syntax error message instead. L<[perl #125805]|https://rt.perl.org/Ticket/Display.html?id=125805> =item * Regular expression possessive quantifier Perl 5.20 regression now fixed. C<qr/>I<PAT>C<{>I<min>,I<max>C<}+>C</> is supposed to behave identically to C<qr/(?E<gt>>I<PAT>C<{>I<min>,I<max>C<})/>. Since Perl 5.20, this didn't work if I<min> and I<max> were equal. L<[perl #125825]|https://rt.perl.org/Ticket/Display.html?id=125825> =item * Certain syntax errors in L<perlrecharclass/Extended Bracketed Character Classes> caused panics instead of the proper error message. This has now been fixed. L<[perl #126481]|https://rt.perl.org/Ticket/Display.html?id=126481> =item * C<< BEGIN <> >> no longer segfaults and properly produces an error message. L<[perl #125341]|https://rt.perl.org/Ticket/Display.html?id=125341> =item * A regression from Perl 5.20 has been fixed, in which some syntax errors in L<C<(?[...])>|perlrecharclass/Extended Bracketed Character Classes> constructs within regular expression patterns could cause a segfault instead of a proper error message. L<[perl #126180]|https://rt.perl.org/Ticket/Display.html?id=126180> =item * Another problem with L<C<(?[...])>|perlrecharclass/Extended Bracketed Character Classes> constructs has been fixed wherein things like C<\c]> could cause panics. L<[perl #126181]|https://rt.perl.org/Ticket/Display.html?id=126181> =item * In Perl 5.22.0, the logic changed when parsing a numeric parameter to the -C option, such that the successfully parsed number was not saved as the option value if it parsed to the end of the argument. L<[perl #125381]|https://rt.perl.org/Ticket/Display.html?id=125381> =item * Warning fatality is now ignored when rewinding the stack. This prevents infinite recursion when the now fatal error also causes rewinding of the stack. L<[perl #123398]|https://rt.perl.org/Ticket/Display.html?id=123398> =item * A crash with C<< %::=(); J->${\"::"} >> has been fixed. L<[perl #125541]|https://rt.perl.org/Ticket/Display.html?id=125541> =item * Nested quantifiers such as C</.{1}??/> should cause perl to throw a fatal error, but were being silently accepted since Perl 5.20.0. This has been fixed. L<[perl #126253]|https://rt.perl.org/Ticket/Display.html?id=126253> =item * Regular expression sequences such as C</(?i/> (and similarly with other recognized flags or combination of flags) should cause perl to throw a fatal error, but were being silently accepted since Perl 5.18.0. This has been fixed. L<[perl #126178]|https://rt.perl.org/Ticket/Display.html?id=126178> =item * A bug in hexadecimal floating point literal support meant that high-order bits could be lost in cases where mantissa overflow was caused by too many trailing zeros in the fractional part. This has been fixed. L<[perl #126582]|https://rt.perl.org/Ticket/Display.html?id=126582> =item * Another hexadecimal floating point bug, causing low-order bits to be lost in cases where the last hexadecimal digit of the mantissa has bits straddling the limit of the number of bits allowed for the mantissa, has also been fixed. L<[perl #126586]|https://rt.perl.org/Ticket/Display.html?id=126586> =item * Further hexadecimal floating point bugs have been fixed: In some circumstances, the C<%a> format specifier could variously lose the sign of the negative zero, fail to display zeros after the radix point with the requested precision, or even lose the radix point after the leftmost hexadecimal digit completely. =item * A crash caused by incomplete expressions within C<< /(?[ ])/ >> (e.g. C<< /(?[[0]+()+])/ >>) has been fixed. L<[perl #126615]|https://rt.perl.org/Ticket/Display.html?id=126615> =back =head1 Acknowledgements Perl 5.22.1 represents approximately 6 months of development since Perl 5.22.0 and contains approximately 19,000 lines of changes across 130 files from 27 authors. Excluding auto-generated files, documentation and release tools, there were approximately 1,700 lines of changes to 44 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.22.1: Aaron Crane, Abigail, Andy Broad, Aristotle Pagaltzis, Chase Whitener, Chris 'BinGOs' Williams, Craig A. Berry, Daniel Dragan, David Mitchell, Father Chrysostomos, Herbert Breunung, Hugo van der Sanden, James E Keenan, Jan Dubois, Jarkko Hietaniemi, Karen Etheridge, Karl Williamson, Lukas Mai, Matthew Horsfall, Peter Martini, Rafael Garcia-Suarez, Ricardo Signes, Shlomi Fish, Sisyphus, Steve Hay, Tony Cook, Victor Adam. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at https://rt.perl.org/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlmacos.pod 0000644 00000001746 15125556335 0007257 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specially designed to be readable as is. =head1 NAME perlmacos - Perl under Mac OS (Classic) =head1 SYNOPSIS For Mac OS X see README.macosx Perl under Mac OS Classic has not been supported since before Perl 5.10 (April 2004). When we say "Mac OS" below, we mean Mac OS 7, 8, and 9, and I<not> Mac OS X. =head1 DESCRIPTION The port of Perl to Mac OS was officially removed as of Perl 5.12, though the last official production release of MacPerl corresponded to Perl 5.6. While Perl 5.10 included the port to Mac OS, ExtUtils::MakeMaker, a core part of Perl's module installation infrastructure officially dropped support for Mac OS in April 2004. =head1 AUTHOR Perl was ported to Mac OS by Matthias Neeracher E<lt>neeracher@mac.comE<gt>. Chris Nandor E<lt>pudge@pobox.comE<gt> continued development and maintenance for the duration of the port's life. perlbot.pod 0000644 00000000460 15125556335 0006731 0 ustar 00 =encoding utf8 =head1 NAME perlbot - Links to information on object-oriented programming in Perl =head1 DESCRIPTION For information on OO programming with Perl, please see L<perlootut> and L<perlobj>. (The above documents supersede the collection of tricks that was formerly here in perlbot.) =cut perldebug.pod 0000644 00000114727 15125556335 0007247 0 ustar 00 =head1 NAME X<debug> X<debugger> perldebug - Perl debugging =head1 DESCRIPTION First of all, have you tried using L<C<use strict;>|strict> and L<C<use warnings;>|warnings>? If you're new to the Perl debugger, you may prefer to read L<perldebtut>, which is a tutorial introduction to the debugger. If you're looking for the nitty gritty details of how the debugger is I<implemented>, you may prefer to read L<perldebguts>. =head1 The Perl Debugger If you invoke Perl with the B<-d> switch, your script runs under the Perl source debugger. This works like an interactive Perl environment, prompting for debugger commands that let you examine source code, set breakpoints, get stack backtraces, change the values of variables, etc. This is so convenient that you often fire up the debugger all by itself just to test out Perl constructs interactively to see what they do. For example: X<-d> $ perl -d -e 42 In Perl, the debugger is not a separate program the way it usually is in the typical compiled environment. Instead, the B<-d> flag tells the compiler to insert source information into the parse trees it's about to hand off to the interpreter. That means your code must first compile correctly for the debugger to work on it. Then when the interpreter starts up, it preloads a special Perl library file containing the debugger. The program will halt I<right before> the first run-time executable statement (but see below regarding compile-time statements) and ask you to enter a debugger command. Contrary to popular expectations, whenever the debugger halts and shows you a line of code, it always displays the line it's I<about> to execute, rather than the one it has just executed. Any command not recognized by the debugger is directly executed (C<eval>'d) as Perl code in the current package. (The debugger uses the DB package for keeping its own state information.) Note that the said C<eval> is bound by an implicit scope. As a result any newly introduced lexical variable or any modified capture buffer content is lost after the eval. The debugger is a nice environment to learn Perl, but if you interactively experiment using material which should be in the same scope, stuff it in one line. For any text entered at the debugger prompt, leading and trailing whitespace is first stripped before further processing. If a debugger command coincides with some function in your own program, merely precede the function with something that doesn't look like a debugger command, such as a leading C<;> or perhaps a C<+>, or by wrapping it with parentheses or braces. =head2 Calling the Debugger There are several ways to call the debugger: =over 4 =item perl -d program_name On the given program identified by C<program_name>. =item perl -d -e 0 Interactively supply an arbitrary C<expression> using C<-e>. =item perl -d:ptkdb program_name Debug a given program via the C<Devel::ptkdb> GUI. =item perl -dt threaded_program_name Debug a given program using threads (experimental). =back =head2 Debugger Commands The interactive debugger understands the following commands: =over 12 =item h X<debugger command, h> Prints out a summary help message =item h [command] Prints out a help message for the given debugger command. =item h h The special argument of C<h h> produces the entire help page, which is quite long. If the output of the C<h h> command (or any command, for that matter) scrolls past your screen, precede the command with a leading pipe symbol so that it's run through your pager, as in DB> |h h You may change the pager which is used via C<o pager=...> command. =item p expr X<debugger command, p> Same as C<print {$DB::OUT} expr> in the current package. In particular, because this is just Perl's own C<print> function, this means that nested data structures and objects are not dumped, unlike with the C<x> command. The C<DB::OUT> filehandle is opened to F</dev/tty>, regardless of where STDOUT may be redirected to. =item x [maxdepth] expr X<debugger command, x> Evaluates its expression in list context and dumps out the result in a pretty-printed fashion. Nested data structures are printed out recursively, unlike the real C<print> function in Perl. When dumping hashes, you'll probably prefer 'x \%h' rather than 'x %h'. See L<Dumpvalue> if you'd like to do this yourself. The output format is governed by multiple options described under L</"Configurable Options">. If the C<maxdepth> is included, it must be a numeral I<N>; the value is dumped only I<N> levels deep, as if the C<dumpDepth> option had been temporarily set to I<N>. =item V [pkg [vars]] X<debugger command, V> Display all (or some) variables in package (defaulting to C<main>) using a data pretty-printer (hashes show their keys and values so you see what's what, control characters are made printable, etc.). Make sure you don't put the type specifier (like C<$>) there, just the symbol names, like this: V DB filename line Use C<~pattern> and C<!pattern> for positive and negative regexes. This is similar to calling the C<x> command on each applicable var. =item X [vars] X<debugger command, X> Same as C<V currentpackage [vars]>. =item y [level [vars]] X<debugger command, y> Display all (or some) lexical variables (mnemonic: C<mY> variables) in the current scope or I<level> scopes higher. You can limit the variables that you see with I<vars> which works exactly as it does for the C<V> and C<X> commands. Requires the C<PadWalker> module version 0.08 or higher; will warn if this isn't installed. Output is pretty-printed in the same style as for C<V> and the format is controlled by the same options. =item T X<debugger command, T> X<backtrace> X<stack, backtrace> Produce a stack backtrace. See below for details on its output. =item s [expr] X<debugger command, s> X<step> Single step. Executes until the beginning of another statement, descending into subroutine calls. If an expression is supplied that includes function calls, it too will be single-stepped. =item n [expr] X<debugger command, n> Next. Executes over subroutine calls, until the beginning of the next statement. If an expression is supplied that includes function calls, those functions will be executed with stops before each statement. =item r X<debugger command, r> Continue until the return from the current subroutine. Dump the return value if the C<PrintRet> option is set (default). =item <CR> Repeat last C<n> or C<s> command. =item c [line|sub] X<debugger command, c> Continue, optionally inserting a one-time-only breakpoint at the specified line or subroutine. =item l X<debugger command, l> List next window of lines. =item l min+incr List C<incr+1> lines starting at C<min>. =item l min-max List lines C<min> through C<max>. C<l -> is synonymous to C<->. =item l line List a single line. =item l subname List first window of lines from subroutine. I<subname> may be a variable that contains a code reference. =item - X<debugger command, -> List previous window of lines. =item v [line] X<debugger command, v> View a few lines of code around the current line. =item . X<debugger command, .> Return the internal debugger pointer to the line last executed, and print out that line. =item f filename X<debugger command, f> Switch to viewing a different file or C<eval> statement. If I<filename> is not a full pathname found in the values of %INC, it is considered a regex. C<eval>ed strings (when accessible) are considered to be filenames: C<f (eval 7)> and C<f eval 7\b> access the body of the 7th C<eval>ed string (in the order of execution). The bodies of the currently executed C<eval> and of C<eval>ed strings that define subroutines are saved and thus accessible. =item /pattern/ Search forwards for pattern (a Perl regex); final / is optional. The search is case-insensitive by default. =item ?pattern? Search backwards for pattern; final ? is optional. The search is case-insensitive by default. =item L [abw] X<debugger command, L> List (default all) actions, breakpoints and watch expressions =item S [[!]regex] X<debugger command, S> List subroutine names [not] matching the regex. =item t [n] X<debugger command, t> Toggle trace mode (see also the C<AutoTrace> option). Optional argument is the maximum number of levels to trace below the current one; anything deeper than that will be silent. =item t [n] expr X<debugger command, t> Trace through execution of C<expr>. Optional first argument is the maximum number of levels to trace below the current one; anything deeper than that will be silent. See L<perldebguts/"Frame Listing Output Examples"> for examples. =item b X<breakpoint> X<debugger command, b> Sets breakpoint on current line =item b [line] [condition] X<breakpoint> X<debugger command, b> Set a breakpoint before the given line. If a condition is specified, it's evaluated each time the statement is reached: a breakpoint is taken only if the condition is true. Breakpoints may only be set on lines that begin an executable statement. Conditions don't use C<if>: b 237 $x > 30 b 237 ++$count237 < 11 b 33 /pattern/i If the line number is C<.>, sets a breakpoint on the current line: b . $n > 100 =item b [file]:[line] [condition] X<breakpoint> X<debugger command, b> Set a breakpoint before the given line in a (possibly different) file. If a condition is specified, it's evaluated each time the statement is reached: a breakpoint is taken only if the condition is true. Breakpoints may only be set on lines that begin an executable statement. Conditions don't use C<if>: b lib/MyModule.pm:237 $x > 30 b /usr/lib/perl5/site_perl/CGI.pm:100 ++$count100 < 11 =item b subname [condition] X<breakpoint> X<debugger command, b> Set a breakpoint before the first line of the named subroutine. I<subname> may be a variable containing a code reference (in this case I<condition> is not supported). =item b postpone subname [condition] X<breakpoint> X<debugger command, b> Set a breakpoint at first line of subroutine after it is compiled. =item b load filename X<breakpoint> X<debugger command, b> Set a breakpoint before the first executed line of the I<filename>, which should be a full pathname found amongst the %INC values. =item b compile subname X<breakpoint> X<debugger command, b> Sets a breakpoint before the first statement executed after the specified subroutine is compiled. =item B line X<breakpoint> X<debugger command, B> Delete a breakpoint from the specified I<line>. =item B * X<breakpoint> X<debugger command, B> Delete all installed breakpoints. =item disable [file]:[line] X<breakpoint> X<debugger command, disable> X<disable> Disable the breakpoint so it won't stop the execution of the program. Breakpoints are enabled by default and can be re-enabled using the C<enable> command. =item disable [line] X<breakpoint> X<debugger command, disable> X<disable> Disable the breakpoint so it won't stop the execution of the program. Breakpoints are enabled by default and can be re-enabled using the C<enable> command. This is done for a breakpoint in the current file. =item enable [file]:[line] X<breakpoint> X<debugger command, disable> X<disable> Enable the breakpoint so it will stop the execution of the program. =item enable [line] X<breakpoint> X<debugger command, disable> X<disable> Enable the breakpoint so it will stop the execution of the program. This is done for a breakpoint in the current file. =item a [line] command X<debugger command, a> Set an action to be done before the line is executed. If I<line> is omitted, set an action on the line about to be executed. The sequence of steps taken by the debugger is 1. check for a breakpoint at this line 2. print the line if necessary (tracing) 3. do any actions associated with that line 4. prompt user if at a breakpoint or in single-step 5. evaluate line For example, this will print out $foo every time line 53 is passed: a 53 print "DB FOUND $foo\n" =item A line X<debugger command, A> Delete an action from the specified line. =item A * X<debugger command, A> Delete all installed actions. =item w expr X<debugger command, w> Add a global watch-expression. Whenever a watched global changes the debugger will stop and display the old and new values. =item W expr X<debugger command, W> Delete watch-expression =item W * X<debugger command, W> Delete all watch-expressions. =item o X<debugger command, o> Display all options. =item o booloption ... X<debugger command, o> Set each listed Boolean option to the value C<1>. =item o anyoption? ... X<debugger command, o> Print out the value of one or more options. =item o option=value ... X<debugger command, o> Set the value of one or more options. If the value has internal whitespace, it should be quoted. For example, you could set C<o pager="less -MQeicsNfr"> to call B<less> with those specific options. You may use either single or double quotes, but if you do, you must escape any embedded instances of same sort of quote you began with, as well as any escaping any escapes that immediately precede that quote but which are not meant to escape the quote itself. In other words, you follow single-quoting rules irrespective of the quote; eg: C<o option='this isn\'t bad'> or C<o option="She said, \"Isn't it?\"">. For historical reasons, the C<=value> is optional, but defaults to 1 only where it is safe to do so--that is, mostly for Boolean options. It is always better to assign a specific value using C<=>. The C<option> can be abbreviated, but for clarity probably should not be. Several options can be set together. See L</"Configurable Options"> for a list of these. =item < ? X<< debugger command, < >> List out all pre-prompt Perl command actions. =item < [ command ] X<< debugger command, < >> Set an action (Perl command) to happen before every debugger prompt. A multi-line command may be entered by backslashing the newlines. =item < * X<< debugger command, < >> Delete all pre-prompt Perl command actions. =item << command X<< debugger command, << >> Add an action (Perl command) to happen before every debugger prompt. A multi-line command may be entered by backwhacking the newlines. =item > ? X<< debugger command, > >> List out post-prompt Perl command actions. =item > command X<< debugger command, > >> Set an action (Perl command) to happen after the prompt when you've just given a command to return to executing the script. A multi-line command may be entered by backslashing the newlines (we bet you couldn't have guessed this by now). =item > * X<< debugger command, > >> Delete all post-prompt Perl command actions. =item >> command X<<< debugger command, >> >>> Adds an action (Perl command) to happen after the prompt when you've just given a command to return to executing the script. A multi-line command may be entered by backslashing the newlines. =item { ? X<debugger command, {> List out pre-prompt debugger commands. =item { [ command ] Set an action (debugger command) to happen before every debugger prompt. A multi-line command may be entered in the customary fashion. Because this command is in some senses new, a warning is issued if you appear to have accidentally entered a block instead. If that's what you mean to do, write it as with C<;{ ... }> or even C<do { ... }>. =item { * X<debugger command, {> Delete all pre-prompt debugger commands. =item {{ command X<debugger command, {{> Add an action (debugger command) to happen before every debugger prompt. A multi-line command may be entered, if you can guess how: see above. =item ! number X<debugger command, !> Redo a previous command (defaults to the previous command). =item ! -number X<debugger command, !> Redo number'th previous command. =item ! pattern X<debugger command, !> Redo last command that started with pattern. See C<o recallCommand>, too. =item !! cmd X<debugger command, !!> Run cmd in a subprocess (reads from DB::IN, writes to DB::OUT) See C<o shellBang>, also. Note that the user's current shell (well, their C<$ENV{SHELL}> variable) will be used, which can interfere with proper interpretation of exit status or signal and coredump information. =item source file X<debugger command, source> Read and execute debugger commands from I<file>. I<file> may itself contain C<source> commands. =item H -number X<debugger command, H> Display last n commands. Only commands longer than one character are listed. If I<number> is omitted, list them all. =item q or ^D X<debugger command, q> X<debugger command, ^D> Quit. ("quit" doesn't work for this, unless you've made an alias) This is the only supported way to exit the debugger, though typing C<exit> twice might work. Set the C<inhibit_exit> option to 0 if you want to be able to step off the end the script. You may also need to set $finished to 0 if you want to step through global destruction. =item R X<debugger command, R> Restart the debugger by C<exec()>ing a new session. We try to maintain your history across this, but internal settings and command-line options may be lost. The following setting are currently preserved: history, breakpoints, actions, debugger options, and the Perl command-line options B<-w>, B<-I>, and B<-e>. =item |dbcmd X<debugger command, |> Run the debugger command, piping DB::OUT into your current pager. =item ||dbcmd X<debugger command, ||> Same as C<|dbcmd> but DB::OUT is temporarily C<select>ed as well. =item = [alias value] X<debugger command, => Define a command alias, like = quit q or list current aliases. =item command Execute command as a Perl statement. A trailing semicolon will be supplied. If the Perl statement would otherwise be confused for a Perl debugger, use a leading semicolon, too. =item m expr X<debugger command, m> List which methods may be called on the result of the evaluated expression. The expression may evaluated to a reference to a blessed object, or to a package name. =item M X<debugger command, M> Display all loaded modules and their versions. =item man [manpage] X<debugger command, man> Despite its name, this calls your system's default documentation viewer on the given page, or on the viewer itself if I<manpage> is omitted. If that viewer is B<man>, the current C<Config> information is used to invoke B<man> using the proper MANPATH or S<B<-M> I<manpath>> option. Failed lookups of the form C<XXX> that match known manpages of the form I<perlXXX> will be retried. This lets you type C<man debug> or C<man op> from the debugger. On systems traditionally bereft of a usable B<man> command, the debugger invokes B<perldoc>. Occasionally this determination is incorrect due to recalcitrant vendors or rather more felicitously, to enterprising users. If you fall into either category, just manually set the $DB::doccmd variable to whatever viewer to view the Perl documentation on your system. This may be set in an rc file, or through direct assignment. We're still waiting for a working example of something along the lines of: $DB::doccmd = 'netscape -remote http://something.here/'; =back =head2 Configurable Options The debugger has numerous options settable using the C<o> command, either interactively or from the environment or an rc file. (./.perldb or ~/.perldb under Unix.) =over 12 =item C<recallCommand>, C<ShellBang> X<debugger option, recallCommand> X<debugger option, ShellBang> The characters used to recall a command or spawn a shell. By default, both are set to C<!>, which is unfortunate. =item C<pager> X<debugger option, pager> Program to use for output of pager-piped commands (those beginning with a C<|> character.) By default, C<$ENV{PAGER}> will be used. Because the debugger uses your current terminal characteristics for bold and underlining, if the chosen pager does not pass escape sequences through unchanged, the output of some debugger commands will not be readable when sent through the pager. =item C<tkRunning> X<debugger option, tkRunning> Run Tk while prompting (with ReadLine). =item C<signalLevel>, C<warnLevel>, C<dieLevel> X<debugger option, signalLevel> X<debugger option, warnLevel> X<debugger option, dieLevel> Level of verbosity. By default, the debugger leaves your exceptions and warnings alone, because altering them can break correctly running programs. It will attempt to print a message when uncaught INT, BUS, or SEGV signals arrive. (But see the mention of signals in L</BUGS> below.) To disable this default safe mode, set these values to something higher than 0. At a level of 1, you get backtraces upon receiving any kind of warning (this is often annoying) or exception (this is often valuable). Unfortunately, the debugger cannot discern fatal exceptions from non-fatal ones. If C<dieLevel> is even 1, then your non-fatal exceptions are also traced and unceremoniously altered if they came from C<eval'ed> strings or from any kind of C<eval> within modules you're attempting to load. If C<dieLevel> is 2, the debugger doesn't care where they came from: It usurps your exception handler and prints out a trace, then modifies all exceptions with its own embellishments. This may perhaps be useful for some tracing purposes, but tends to hopelessly destroy any program that takes its exception handling seriously. =item C<AutoTrace> X<debugger option, AutoTrace> Trace mode (similar to C<t> command, but can be put into C<PERLDB_OPTS>). =item C<LineInfo> X<debugger option, LineInfo> File or pipe to print line number info to. If it is a pipe (say, C<|visual_perl_db>), then a short message is used. This is the mechanism used to interact with a slave editor or visual debugger, such as the special C<vi> or C<emacs> hooks, or the C<ddd> graphical debugger. =item C<inhibit_exit> X<debugger option, inhibit_exit> If 0, allows I<stepping off> the end of the script. =item C<PrintRet> X<debugger option, PrintRet> Print return value after C<r> command if set (default). =item C<ornaments> X<debugger option, ornaments> Affects screen appearance of the command line (see L<Term::ReadLine>). There is currently no way to disable these, which can render some output illegible on some displays, or with some pagers. This is considered a bug. =item C<frame> X<debugger option, frame> Affects the printing of messages upon entry and exit from subroutines. If C<frame & 2> is false, messages are printed on entry only. (Printing on exit might be useful if interspersed with other messages.) If C<frame & 4>, arguments to functions are printed, plus context and caller info. If C<frame & 8>, overloaded C<stringify> and C<tie>d C<FETCH> is enabled on the printed arguments. If C<frame & 16>, the return value from the subroutine is printed. The length at which the argument list is truncated is governed by the next option: =item C<maxTraceLen> X<debugger option, maxTraceLen> Length to truncate the argument list when the C<frame> option's bit 4 is set. =item C<windowSize> X<debugger option, windowSize> Change the size of code list window (default is 10 lines). =back The following options affect what happens with C<V>, C<X>, and C<x> commands: =over 12 =item C<arrayDepth>, C<hashDepth> X<debugger option, arrayDepth> X<debugger option, hashDepth> Print only first N elements ('' for all). =item C<dumpDepth> X<debugger option, dumpDepth> Limit recursion depth to N levels when dumping structures. Negative values are interpreted as infinity. Default: infinity. =item C<compactDump>, C<veryCompact> X<debugger option, compactDump> X<debugger option, veryCompact> Change the style of array and hash output. If C<compactDump>, short array may be printed on one line. =item C<globPrint> X<debugger option, globPrint> Whether to print contents of globs. =item C<DumpDBFiles> X<debugger option, DumpDBFiles> Dump arrays holding debugged files. =item C<DumpPackages> X<debugger option, DumpPackages> Dump symbol tables of packages. =item C<DumpReused> X<debugger option, DumpReused> Dump contents of "reused" addresses. =item C<quote>, C<HighBit>, C<undefPrint> X<debugger option, quote> X<debugger option, HighBit> X<debugger option, undefPrint> Change the style of string dump. The default value for C<quote> is C<auto>; one can enable double-quotish or single-quotish format by setting it to C<"> or C<'>, respectively. By default, characters with their high bit set are printed verbatim. =item C<UsageOnly> X<debugger option, UsageOnly> Rudimentary per-package memory usage dump. Calculates total size of strings found in variables in the package. This does not include lexicals in a module's file scope, or lost in closures. =item C<HistFile> X<debugger option, history, HistFile> The path of the file from which the history (assuming a usable Term::ReadLine backend) will be read on the debugger's startup, and to which it will be saved on shutdown (for persistence across sessions). Similar in concept to Bash's C<.bash_history> file. =item C<HistSize> X<debugger option, history, HistSize> The count of the saved lines in the history (assuming C<HistFile> above). =back After the rc file is read, the debugger reads the C<$ENV{PERLDB_OPTS}> environment variable and parses this as the remainder of a "O ..." line as one might enter at the debugger prompt. You may place the initialization options C<TTY>, C<noTTY>, C<ReadLine>, and C<NonStop> there. If your rc file contains: parse_options("NonStop=1 LineInfo=db.out AutoTrace"); then your script will run without human intervention, putting trace information into the file I<db.out>. (If you interrupt it, you'd better reset C<LineInfo> to F</dev/tty> if you expect to see anything.) =over 12 =item C<TTY> X<debugger option, TTY> The TTY to use for debugging I/O. =item C<noTTY> X<debugger option, noTTY> If set, the debugger goes into C<NonStop> mode and will not connect to a TTY. If interrupted (or if control goes to the debugger via explicit setting of $DB::signal or $DB::single from the Perl script), it connects to a TTY specified in the C<TTY> option at startup, or to a tty found at runtime using the C<Term::Rendezvous> module of your choice. This module should implement a method named C<new> that returns an object with two methods: C<IN> and C<OUT>. These should return filehandles to use for debugging input and output correspondingly. The C<new> method should inspect an argument containing the value of C<$ENV{PERLDB_NOTTY}> at startup, or C<"$ENV{HOME}/.perldbtty$$"> otherwise. This file is not inspected for proper ownership, so security hazards are theoretically possible. =item C<ReadLine> X<debugger option, ReadLine> If false, readline support in the debugger is disabled in order to debug applications that themselves use ReadLine. =item C<NonStop> X<debugger option, NonStop> If set, the debugger goes into non-interactive mode until interrupted, or programmatically by setting $DB::signal or $DB::single. =back Here's an example of using the C<$ENV{PERLDB_OPTS}> variable: $ PERLDB_OPTS="NonStop frame=2" perl -d myprogram That will run the script B<myprogram> without human intervention, printing out the call tree with entry and exit points. Note that C<NonStop=1 frame=2> is equivalent to C<N f=2>, and that originally, options could be uniquely abbreviated by the first letter (modulo the C<Dump*> options). It is nevertheless recommended that you always spell them out in full for legibility and future compatibility. Other examples include $ PERLDB_OPTS="NonStop LineInfo=listing frame=2" perl -d myprogram which runs script non-interactively, printing info on each entry into a subroutine and each executed line into the file named F<listing>. (If you interrupt it, you would better reset C<LineInfo> to something "interactive"!) Other examples include (using standard shell syntax to show environment variable settings): $ ( PERLDB_OPTS="NonStop frame=1 AutoTrace LineInfo=tperl.out" perl -d myprogram ) which may be useful for debugging a program that uses C<Term::ReadLine> itself. Do not forget to detach your shell from the TTY in the window that corresponds to F</dev/ttyXX>, say, by issuing a command like $ sleep 1000000 See L<perldebguts/"Debugger Internals"> for details. =head2 Debugger Input/Output =over 8 =item Prompt The debugger prompt is something like DB<8> or even DB<<17>> where that number is the command number, and which you'd use to access with the built-in B<csh>-like history mechanism. For example, C<!17> would repeat command number 17. The depth of the angle brackets indicates the nesting depth of the debugger. You could get more than one set of brackets, for example, if you'd already at a breakpoint and then printed the result of a function call that itself has a breakpoint, or you step into an expression via C<s/n/t expression> command. =item Multiline commands If you want to enter a multi-line command, such as a subroutine definition with several statements or a format, escape the newline that would normally end the debugger command with a backslash. Here's an example: DB<1> for (1..4) { \ cont: print "ok\n"; \ cont: } ok ok ok ok Note that this business of escaping a newline is specific to interactive commands typed into the debugger. =item Stack backtrace X<backtrace> X<stack, backtrace> Here's an example of what a stack backtrace via C<T> command might look like: $ = main::infested called from file 'Ambulation.pm' line 10 @ = Ambulation::legs(1, 2, 3, 4) called from file 'camel_flea' line 7 $ = main::pests('bactrian', 4) called from file 'camel_flea' line 4 The left-hand character up there indicates the context in which the function was called, with C<$> and C<@> meaning scalar or list contexts respectively, and C<.> meaning void context (which is actually a sort of scalar context). The display above says that you were in the function C<main::infested> when you ran the stack dump, and that it was called in scalar context from line 10 of the file I<Ambulation.pm>, but without any arguments at all, meaning it was called as C<&infested>. The next stack frame shows that the function C<Ambulation::legs> was called in list context from the I<camel_flea> file with four arguments. The last stack frame shows that C<main::pests> was called in scalar context, also from I<camel_flea>, but from line 4. If you execute the C<T> command from inside an active C<use> statement, the backtrace will contain both a C<require> frame and an C<eval> frame. =item Line Listing Format This shows the sorts of output the C<l> command can produce: DB<<13>> l 101: @i{@i} = (); 102:b @isa{@i,$pack} = () 103 if(exists $i{$prevpack} || exists $isa{$pack}); 104 } 105 106 next 107==> if(exists $isa{$pack}); 108 109:a if ($extra-- > 0) { 110: %isa = ($pack,1); Breakable lines are marked with C<:>. Lines with breakpoints are marked by C<b> and those with actions by C<a>. The line that's about to be executed is marked by C<< ==> >>. Please be aware that code in debugger listings may not look the same as your original source code. Line directives and external source filters can alter the code before Perl sees it, causing code to move from its original positions or take on entirely different forms. =item Frame listing When the C<frame> option is set, the debugger would print entered (and optionally exited) subroutines in different styles. See L<perldebguts> for incredibly long examples of these. =back =head2 Debugging Compile-Time Statements If you have compile-time executable statements (such as code within BEGIN, UNITCHECK and CHECK blocks or C<use> statements), these will I<not> be stopped by debugger, although C<require>s and INIT blocks will, and compile-time statements can be traced with the C<AutoTrace> option set in C<PERLDB_OPTS>). From your own Perl code, however, you can transfer control back to the debugger using the following statement, which is harmless if the debugger is not running: $DB::single = 1; If you set C<$DB::single> to 2, it's equivalent to having just typed the C<n> command, whereas a value of 1 means the C<s> command. The C<$DB::trace> variable should be set to 1 to simulate having typed the C<t> command. Another way to debug compile-time code is to start the debugger, set a breakpoint on the I<load> of some module: DB<7> b load f:/perllib/lib/Carp.pm Will stop on load of 'f:/perllib/lib/Carp.pm'. and then restart the debugger using the C<R> command (if possible). One can use C<b compile subname> for the same purpose. =head2 Debugger Customization The debugger probably contains enough configuration hooks that you won't ever have to modify it yourself. You may change the behaviour of the debugger from within the debugger using its C<o> command, from the command line via the C<PERLDB_OPTS> environment variable, and from customization files. You can do some customization by setting up a F<.perldb> file, which contains initialization code. For instance, you could make aliases like these (the last one is one people expect to be there): $DB::alias{'len'} = 's/^len(.*)/p length($1)/'; $DB::alias{'stop'} = 's/^stop (at|in)/b/'; $DB::alias{'ps'} = 's/^ps\b/p scalar /'; $DB::alias{'quit'} = 's/^quit(\s*)/exit/'; You can change options from F<.perldb> by using calls like this one; parse_options("NonStop=1 LineInfo=db.out AutoTrace=1 frame=2"); The code is executed in the package C<DB>. Note that F<.perldb> is processed before processing C<PERLDB_OPTS>. If F<.perldb> defines the subroutine C<afterinit>, that function is called after debugger initialization ends. F<.perldb> may be contained in the current directory, or in the home directory. Because this file is sourced in by Perl and may contain arbitrary commands, for security reasons, it must be owned by the superuser or the current user, and writable by no one but its owner. You can mock TTY input to debugger by adding arbitrary commands to @DB::typeahead. For example, your F<.perldb> file might contain: sub afterinit { push @DB::typeahead, "b 4", "b 6"; } Which would attempt to set breakpoints on lines 4 and 6 immediately after debugger initialization. Note that @DB::typeahead is not a supported interface and is subject to change in future releases. If you want to modify the debugger, copy F<perl5db.pl> from the Perl library to another name and hack it to your heart's content. You'll then want to set your C<PERL5DB> environment variable to say something like this: BEGIN { require "myperl5db.pl" } As a last resort, you could also use C<PERL5DB> to customize the debugger by directly setting internal variables or calling debugger functions. Note that any variables and functions that are not documented in this document (or in L<perldebguts>) are considered for internal use only, and as such are subject to change without notice. =head2 Readline Support / History in the Debugger As shipped, the only command-line history supplied is a simplistic one that checks for leading exclamation points. However, if you install the Term::ReadKey and Term::ReadLine modules from CPAN (such as Term::ReadLine::Gnu, Term::ReadLine::Perl, ...) you will have full editing capabilities much like those GNU I<readline>(3) provides. Look for these in the F<modules/by-module/Term> directory on CPAN. These do not support normal B<vi> command-line editing, however. A rudimentary command-line completion is also available, including lexical variables in the current scope if the C<PadWalker> module is installed. Without Readline support you may see the symbols "^[[A", "^[[C", "^[[B", "^[[D"", "^H", ... when using the arrow keys and/or the backspace key. =head2 Editor Support for Debugging If you have the GNU's version of B<emacs> installed on your system, it can interact with the Perl debugger to provide an integrated software development environment reminiscent of its interactions with C debuggers. Recent versions of Emacs come with a start file for making B<emacs> act like a syntax-directed editor that understands (some of) Perl's syntax. See L<perlfaq3>. Users of B<vi> should also look into B<vim> and B<gvim>, the mousey and windy version, for coloring of Perl keywords. Note that only perl can truly parse Perl, so all such CASE tools fall somewhat short of the mark, especially if you don't program your Perl as a C programmer might. =head2 The Perl Profiler X<profile> X<profiling> X<profiler> If you wish to supply an alternative debugger for Perl to run, invoke your script with a colon and a package argument given to the B<-d> flag. Perl's alternative debuggers include a Perl profiler, L<Devel::NYTProf>, which is available separately as a CPAN distribution. To profile your Perl program in the file F<mycode.pl>, just type: $ perl -d:NYTProf mycode.pl When the script terminates the profiler will create a database of the profile information that you can turn into reports using the profiler's tools. See <perlperf> for details. =head1 Debugging Regular Expressions X<regular expression, debugging> X<regex, debugging> X<regexp, debugging> C<use re 'debug'> enables you to see the gory details of how the Perl regular expression engine works. In order to understand this typically voluminous output, one must not only have some idea about how regular expression matching works in general, but also know how Perl's regular expressions are internally compiled into an automaton. These matters are explored in some detail in L<perldebguts/"Debugging Regular Expressions">. =head1 Debugging Memory Usage X<memory usage> Perl contains internal support for reporting its own memory usage, but this is a fairly advanced concept that requires some understanding of how memory allocation works. See L<perldebguts/"Debugging Perl Memory Usage"> for the details. =head1 SEE ALSO You do have C<use strict> and C<use warnings> enabled, don't you? L<perldebtut>, L<perldebguts>, L<re>, L<DB>, L<Devel::NYTProf>, L<Dumpvalue>, and L<perlrun>. When debugging a script that uses #! and is thus normally found in $PATH, the -S option causes perl to search $PATH for it, so you don't have to type the path or C<which $scriptname>. $ perl -Sd foo.pl =head1 BUGS You cannot get stack frame information or in any fashion debug functions that were not compiled by Perl, such as those from C or C++ extensions. If you alter your @_ arguments in a subroutine (such as with C<shift> or C<pop>), the stack backtrace will not show the original values. The debugger does not currently work in conjunction with the B<-W> command-line switch, because it itself is not free of warnings. If you're in a slow syscall (like C<wait>ing, C<accept>ing, or C<read>ing from your keyboard or a socket) and haven't set up your own C<$SIG{INT}> handler, then you won't be able to CTRL-C your way back to the debugger, because the debugger's own C<$SIG{INT}> handler doesn't understand that it needs to raise an exception to longjmp(3) out of slow syscalls. perlthrtut.pod 0000644 00000132672 15125556335 0007512 0 ustar 00 =encoding utf8 =head1 NAME perlthrtut - Tutorial on threads in Perl =head1 DESCRIPTION This tutorial describes the use of Perl interpreter threads (sometimes referred to as I<ithreads>). In this model, each thread runs in its own Perl interpreter, and any data sharing between threads must be explicit. The user-level interface for I<ithreads> uses the L<threads> class. B<NOTE>: There was another older Perl threading flavor called the 5.005 model that used the L<threads> class. This old model was known to have problems, is deprecated, and was removed for release 5.10. You are strongly encouraged to migrate any existing 5.005 threads code to the new model as soon as possible. You can see which (or neither) threading flavour you have by running C<perl -V> and looking at the C<Platform> section. If you have C<useithreads=define> you have ithreads, if you have C<use5005threads=define> you have 5.005 threads. If you have neither, you don't have any thread support built in. If you have both, you are in trouble. The L<threads> and L<threads::shared> modules are included in the core Perl distribution. Additionally, they are maintained as a separate modules on CPAN, so you can check there for any updates. =head1 What Is A Thread Anyway? A thread is a flow of control through a program with a single execution point. Sounds an awful lot like a process, doesn't it? Well, it should. Threads are one of the pieces of a process. Every process has at least one thread and, up until now, every process running Perl had only one thread. With 5.8, though, you can create extra threads. We're going to show you how, when, and why. =head1 Threaded Program Models There are three basic ways that you can structure a threaded program. Which model you choose depends on what you need your program to do. For many non-trivial threaded programs, you'll need to choose different models for different pieces of your program. =head2 Boss/Worker The boss/worker model usually has one I<boss> thread and one or more I<worker> threads. The boss thread gathers or generates tasks that need to be done, then parcels those tasks out to the appropriate worker thread. This model is common in GUI and server programs, where a main thread waits for some event and then passes that event to the appropriate worker threads for processing. Once the event has been passed on, the boss thread goes back to waiting for another event. The boss thread does relatively little work. While tasks aren't necessarily performed faster than with any other method, it tends to have the best user-response times. =head2 Work Crew In the work crew model, several threads are created that do essentially the same thing to different pieces of data. It closely mirrors classical parallel processing and vector processors, where a large array of processors do the exact same thing to many pieces of data. This model is particularly useful if the system running the program will distribute multiple threads across different processors. It can also be useful in ray tracing or rendering engines, where the individual threads can pass on interim results to give the user visual feedback. =head2 Pipeline The pipeline model divides up a task into a series of steps, and passes the results of one step on to the thread processing the next. Each thread does one thing to each piece of data and passes the results to the next thread in line. This model makes the most sense if you have multiple processors so two or more threads will be executing in parallel, though it can often make sense in other contexts as well. It tends to keep the individual tasks small and simple, as well as allowing some parts of the pipeline to block (on I/O or system calls, for example) while other parts keep going. If you're running different parts of the pipeline on different processors you may also take advantage of the caches on each processor. This model is also handy for a form of recursive programming where, rather than having a subroutine call itself, it instead creates another thread. Prime and Fibonacci generators both map well to this form of the pipeline model. (A version of a prime number generator is presented later on.) =head1 What kind of threads are Perl threads? If you have experience with other thread implementations, you might find that things aren't quite what you expect. It's very important to remember when dealing with Perl threads that I<Perl Threads Are Not X Threads> for all values of X. They aren't POSIX threads, or DecThreads, or Java's Green threads, or Win32 threads. There are similarities, and the broad concepts are the same, but if you start looking for implementation details you're going to be either disappointed or confused. Possibly both. This is not to say that Perl threads are completely different from everything that's ever come before. They're not. Perl's threading model owes a lot to other thread models, especially POSIX. Just as Perl is not C, though, Perl threads are not POSIX threads. So if you find yourself looking for mutexes, or thread priorities, it's time to step back a bit and think about what you want to do and how Perl can do it. However, it is important to remember that Perl threads cannot magically do things unless your operating system's threads allow it. So if your system blocks the entire process on C<sleep()>, Perl usually will, as well. B<Perl Threads Are Different.> =head1 Thread-Safe Modules The addition of threads has changed Perl's internals substantially. There are implications for people who write modules with XS code or external libraries. However, since Perl data is not shared among threads by default, Perl modules stand a high chance of being thread-safe or can be made thread-safe easily. Modules that are not tagged as thread-safe should be tested or code reviewed before being used in production code. Not all modules that you might use are thread-safe, and you should always assume a module is unsafe unless the documentation says otherwise. This includes modules that are distributed as part of the core. Threads are a relatively new feature, and even some of the standard modules aren't thread-safe. Even if a module is thread-safe, it doesn't mean that the module is optimized to work well with threads. A module could possibly be rewritten to utilize the new features in threaded Perl to increase performance in a threaded environment. If you're using a module that's not thread-safe for some reason, you can protect yourself by using it from one, and only one thread at all. If you need multiple threads to access such a module, you can use semaphores and lots of programming discipline to control access to it. Semaphores are covered in L</"Basic semaphores">. See also L</"Thread-Safety of System Libraries">. =head1 Thread Basics The L<threads> module provides the basic functions you need to write threaded programs. In the following sections, we'll cover the basics, showing you what you need to do to create a threaded program. After that, we'll go over some of the features of the L<threads> module that make threaded programming easier. =head2 Basic Thread Support Thread support is a Perl compile-time option. It's something that's turned on or off when Perl is built at your site, rather than when your programs are compiled. If your Perl wasn't compiled with thread support enabled, then any attempt to use threads will fail. Your programs can use the Config module to check whether threads are enabled. If your program can't run without them, you can say something like: use Config; $Config{useithreads} or die('Recompile Perl with threads to run this program.'); A possibly-threaded program using a possibly-threaded module might have code like this: use Config; use MyMod; BEGIN { if ($Config{useithreads}) { # We have threads require MyMod_threaded; import MyMod_threaded; } else { require MyMod_unthreaded; import MyMod_unthreaded; } } Since code that runs both with and without threads is usually pretty messy, it's best to isolate the thread-specific code in its own module. In our example above, that's what C<MyMod_threaded> is, and it's only imported if we're running on a threaded Perl. =head2 A Note about the Examples In a real situation, care should be taken that all threads are finished executing before the program exits. That care has B<not> been taken in these examples in the interest of simplicity. Running these examples I<as is> will produce error messages, usually caused by the fact that there are still threads running when the program exits. You should not be alarmed by this. =head2 Creating Threads The L<threads> module provides the tools you need to create new threads. Like any other module, you need to tell Perl that you want to use it; C<use threads;> imports all the pieces you need to create basic threads. The simplest, most straightforward way to create a thread is with C<create()>: use threads; my $thr = threads->create(\&sub1); sub sub1 { print("In the thread\n"); } The C<create()> method takes a reference to a subroutine and creates a new thread that starts executing in the referenced subroutine. Control then passes both to the subroutine and the caller. If you need to, your program can pass parameters to the subroutine as part of the thread startup. Just include the list of parameters as part of the C<threads-E<gt>create()> call, like this: use threads; my $Param3 = 'foo'; my $thr1 = threads->create(\&sub1, 'Param 1', 'Param 2', $Param3); my @ParamList = (42, 'Hello', 3.14); my $thr2 = threads->create(\&sub1, @ParamList); my $thr3 = threads->create(\&sub1, qw(Param1 Param2 Param3)); sub sub1 { my @InboundParameters = @_; print("In the thread\n"); print('Got parameters >', join('<>',@InboundParameters), "<\n"); } The last example illustrates another feature of threads. You can spawn off several threads using the same subroutine. Each thread executes the same subroutine, but in a separate thread with a separate environment and potentially separate arguments. C<new()> is a synonym for C<create()>. =head2 Waiting For A Thread To Exit Since threads are also subroutines, they can return values. To wait for a thread to exit and extract any values it might return, you can use the C<join()> method: use threads; my ($thr) = threads->create(\&sub1); my @ReturnData = $thr->join(); print('Thread returned ', join(', ', @ReturnData), "\n"); sub sub1 { return ('Fifty-six', 'foo', 2); } In the example above, the C<join()> method returns as soon as the thread ends. In addition to waiting for a thread to finish and gathering up any values that the thread might have returned, C<join()> also performs any OS cleanup necessary for the thread. That cleanup might be important, especially for long-running programs that spawn lots of threads. If you don't want the return values and don't want to wait for the thread to finish, you should call the C<detach()> method instead, as described next. NOTE: In the example above, the thread returns a list, thus necessitating that the thread creation call be made in list context (i.e., C<my ($thr)>). See L<< threads/"$thr->join()" >> and L<threads/"THREAD CONTEXT"> for more details on thread context and return values. =head2 Ignoring A Thread C<join()> does three things: it waits for a thread to exit, cleans up after it, and returns any data the thread may have produced. But what if you're not interested in the thread's return values, and you don't really care when the thread finishes? All you want is for the thread to get cleaned up after when it's done. In this case, you use the C<detach()> method. Once a thread is detached, it'll run until it's finished; then Perl will clean up after it automatically. use threads; my $thr = threads->create(\&sub1); # Spawn the thread $thr->detach(); # Now we officially don't care any more sleep(15); # Let thread run for awhile sub sub1 { my $count = 0; while (1) { $count++; print("\$count is $count\n"); sleep(1); } } Once a thread is detached, it may not be joined, and any return data that it might have produced (if it was done and waiting for a join) is lost. C<detach()> can also be called as a class method to allow a thread to detach itself: use threads; my $thr = threads->create(\&sub1); sub sub1 { threads->detach(); # Do more work } =head2 Process and Thread Termination With threads one must be careful to make sure they all have a chance to run to completion, assuming that is what you want. An action that terminates a process will terminate I<all> running threads. die() and exit() have this property, and perl does an exit when the main thread exits, perhaps implicitly by falling off the end of your code, even if that's not what you want. As an example of this case, this code prints the message "Perl exited with active threads: 2 running and unjoined": use threads; my $thr1 = threads->new(\&thrsub, "test1"); my $thr2 = threads->new(\&thrsub, "test2"); sub thrsub { my ($message) = @_; sleep 1; print "thread $message\n"; } But when the following lines are added at the end: $thr1->join(); $thr2->join(); it prints two lines of output, a perhaps more useful outcome. =head1 Threads And Data Now that we've covered the basics of threads, it's time for our next topic: Data. Threading introduces a couple of complications to data access that non-threaded programs never need to worry about. =head2 Shared And Unshared Data The biggest difference between Perl I<ithreads> and the old 5.005 style threading, or for that matter, to most other threading systems out there, is that by default, no data is shared. When a new Perl thread is created, all the data associated with the current thread is copied to the new thread, and is subsequently private to that new thread! This is similar in feel to what happens when a Unix process forks, except that in this case, the data is just copied to a different part of memory within the same process rather than a real fork taking place. To make use of threading, however, one usually wants the threads to share at least some data between themselves. This is done with the L<threads::shared> module and the C<:shared> attribute: use threads; use threads::shared; my $foo :shared = 1; my $bar = 1; threads->create(sub { $foo++; $bar++; })->join(); print("$foo\n"); # Prints 2 since $foo is shared print("$bar\n"); # Prints 1 since $bar is not shared In the case of a shared array, all the array's elements are shared, and for a shared hash, all the keys and values are shared. This places restrictions on what may be assigned to shared array and hash elements: only simple values or references to shared variables are allowed - this is so that a private variable can't accidentally become shared. A bad assignment will cause the thread to die. For example: use threads; use threads::shared; my $var = 1; my $svar :shared = 2; my %hash :shared; ... create some threads ... $hash{a} = 1; # All threads see exists($hash{a}) # and $hash{a} == 1 $hash{a} = $var; # okay - copy-by-value: same effect as previous $hash{a} = $svar; # okay - copy-by-value: same effect as previous $hash{a} = \$svar; # okay - a reference to a shared variable $hash{a} = \$var; # This will die delete($hash{a}); # okay - all threads will see !exists($hash{a}) Note that a shared variable guarantees that if two or more threads try to modify it at the same time, the internal state of the variable will not become corrupted. However, there are no guarantees beyond this, as explained in the next section. =head2 Thread Pitfalls: Races While threads bring a new set of useful tools, they also bring a number of pitfalls. One pitfall is the race condition: use threads; use threads::shared; my $x :shared = 1; my $thr1 = threads->create(\&sub1); my $thr2 = threads->create(\&sub2); $thr1->join(); $thr2->join(); print("$x\n"); sub sub1 { my $foo = $x; $x = $foo + 1; } sub sub2 { my $bar = $x; $x = $bar + 1; } What do you think C<$x> will be? The answer, unfortunately, is I<it depends>. Both C<sub1()> and C<sub2()> access the global variable C<$x>, once to read and once to write. Depending on factors ranging from your thread implementation's scheduling algorithm to the phase of the moon, C<$x> can be 2 or 3. Race conditions are caused by unsynchronized access to shared data. Without explicit synchronization, there's no way to be sure that nothing has happened to the shared data between the time you access it and the time you update it. Even this simple code fragment has the possibility of error: use threads; my $x :shared = 2; my $y :shared; my $z :shared; my $thr1 = threads->create(sub { $y = $x; $x = $y + 1; }); my $thr2 = threads->create(sub { $z = $x; $x = $z + 1; }); $thr1->join(); $thr2->join(); Two threads both access C<$x>. Each thread can potentially be interrupted at any point, or be executed in any order. At the end, C<$x> could be 3 or 4, and both C<$y> and C<$z> could be 2 or 3. Even C<$x += 5> or C<$x++> are not guaranteed to be atomic. Whenever your program accesses data or resources that can be accessed by other threads, you must take steps to coordinate access or risk data inconsistency and race conditions. Note that Perl will protect its internals from your race conditions, but it won't protect you from you. =head1 Synchronization and control Perl provides a number of mechanisms to coordinate the interactions between themselves and their data, to avoid race conditions and the like. Some of these are designed to resemble the common techniques used in thread libraries such as C<pthreads>; others are Perl-specific. Often, the standard techniques are clumsy and difficult to get right (such as condition waits). Where possible, it is usually easier to use Perlish techniques such as queues, which remove some of the hard work involved. =head2 Controlling access: lock() The C<lock()> function takes a shared variable and puts a lock on it. No other thread may lock the variable until the variable is unlocked by the thread holding the lock. Unlocking happens automatically when the locking thread exits the block that contains the call to the C<lock()> function. Using C<lock()> is straightforward: This example has several threads doing some calculations in parallel, and occasionally updating a running total: use threads; use threads::shared; my $total :shared = 0; sub calc { while (1) { my $result; # (... do some calculations and set $result ...) { lock($total); # Block until we obtain the lock $total += $result; } # Lock implicitly released at end of scope last if $result == 0; } } my $thr1 = threads->create(\&calc); my $thr2 = threads->create(\&calc); my $thr3 = threads->create(\&calc); $thr1->join(); $thr2->join(); $thr3->join(); print("total=$total\n"); C<lock()> blocks the thread until the variable being locked is available. When C<lock()> returns, your thread can be sure that no other thread can lock that variable until the block containing the lock exits. It's important to note that locks don't prevent access to the variable in question, only lock attempts. This is in keeping with Perl's longstanding tradition of courteous programming, and the advisory file locking that C<flock()> gives you. You may lock arrays and hashes as well as scalars. Locking an array, though, will not block subsequent locks on array elements, just lock attempts on the array itself. Locks are recursive, which means it's okay for a thread to lock a variable more than once. The lock will last until the outermost C<lock()> on the variable goes out of scope. For example: my $x :shared; doit(); sub doit { { { lock($x); # Wait for lock lock($x); # NOOP - we already have the lock { lock($x); # NOOP { lock($x); # NOOP lockit_some_more(); } } } # *** Implicit unlock here *** } } sub lockit_some_more { lock($x); # NOOP } # Nothing happens here Note that there is no C<unlock()> function - the only way to unlock a variable is to allow it to go out of scope. A lock can either be used to guard the data contained within the variable being locked, or it can be used to guard something else, like a section of code. In this latter case, the variable in question does not hold any useful data, and exists only for the purpose of being locked. In this respect, the variable behaves like the mutexes and basic semaphores of traditional thread libraries. =head2 A Thread Pitfall: Deadlocks Locks are a handy tool to synchronize access to data, and using them properly is the key to safe shared data. Unfortunately, locks aren't without their dangers, especially when multiple locks are involved. Consider the following code: use threads; my $x :shared = 4; my $y :shared = 'foo'; my $thr1 = threads->create(sub { lock($x); sleep(20); lock($y); }); my $thr2 = threads->create(sub { lock($y); sleep(20); lock($x); }); This program will probably hang until you kill it. The only way it won't hang is if one of the two threads acquires both locks first. A guaranteed-to-hang version is more complicated, but the principle is the same. The first thread will grab a lock on C<$x>, then, after a pause during which the second thread has probably had time to do some work, try to grab a lock on C<$y>. Meanwhile, the second thread grabs a lock on C<$y>, then later tries to grab a lock on C<$x>. The second lock attempt for both threads will block, each waiting for the other to release its lock. This condition is called a deadlock, and it occurs whenever two or more threads are trying to get locks on resources that the others own. Each thread will block, waiting for the other to release a lock on a resource. That never happens, though, since the thread with the resource is itself waiting for a lock to be released. There are a number of ways to handle this sort of problem. The best way is to always have all threads acquire locks in the exact same order. If, for example, you lock variables C<$x>, C<$y>, and C<$z>, always lock C<$x> before C<$y>, and C<$y> before C<$z>. It's also best to hold on to locks for as short a period of time to minimize the risks of deadlock. The other synchronization primitives described below can suffer from similar problems. =head2 Queues: Passing Data Around A queue is a special thread-safe object that lets you put data in one end and take it out the other without having to worry about synchronization issues. They're pretty straightforward, and look like this: use threads; use Thread::Queue; my $DataQueue = Thread::Queue->new(); my $thr = threads->create(sub { while (my $DataElement = $DataQueue->dequeue()) { print("Popped $DataElement off the queue\n"); } }); $DataQueue->enqueue(12); $DataQueue->enqueue("A", "B", "C"); sleep(10); $DataQueue->enqueue(undef); $thr->join(); You create the queue with C<Thread::Queue-E<gt>new()>. Then you can add lists of scalars onto the end with C<enqueue()>, and pop scalars off the front of it with C<dequeue()>. A queue has no fixed size, and can grow as needed to hold everything pushed on to it. If a queue is empty, C<dequeue()> blocks until another thread enqueues something. This makes queues ideal for event loops and other communications between threads. =head2 Semaphores: Synchronizing Data Access Semaphores are a kind of generic locking mechanism. In their most basic form, they behave very much like lockable scalars, except that they can't hold data, and that they must be explicitly unlocked. In their advanced form, they act like a kind of counter, and can allow multiple threads to have the I<lock> at any one time. =head2 Basic semaphores Semaphores have two methods, C<down()> and C<up()>: C<down()> decrements the resource count, while C<up()> increments it. Calls to C<down()> will block if the semaphore's current count would decrement below zero. This program gives a quick demonstration: use threads; use Thread::Semaphore; my $semaphore = Thread::Semaphore->new(); my $GlobalVariable :shared = 0; $thr1 = threads->create(\&sample_sub, 1); $thr2 = threads->create(\&sample_sub, 2); $thr3 = threads->create(\&sample_sub, 3); sub sample_sub { my $SubNumber = shift(@_); my $TryCount = 10; my $LocalCopy; sleep(1); while ($TryCount--) { $semaphore->down(); $LocalCopy = $GlobalVariable; print("$TryCount tries left for sub $SubNumber " ."(\$GlobalVariable is $GlobalVariable)\n"); sleep(2); $LocalCopy++; $GlobalVariable = $LocalCopy; $semaphore->up(); } } $thr1->join(); $thr2->join(); $thr3->join(); The three invocations of the subroutine all operate in sync. The semaphore, though, makes sure that only one thread is accessing the global variable at once. =head2 Advanced Semaphores By default, semaphores behave like locks, letting only one thread C<down()> them at a time. However, there are other uses for semaphores. Each semaphore has a counter attached to it. By default, semaphores are created with the counter set to one, C<down()> decrements the counter by one, and C<up()> increments by one. However, we can override any or all of these defaults simply by passing in different values: use threads; use Thread::Semaphore; my $semaphore = Thread::Semaphore->new(5); # Creates a semaphore with the counter set to five my $thr1 = threads->create(\&sub1); my $thr2 = threads->create(\&sub1); sub sub1 { $semaphore->down(5); # Decrements the counter by five # Do stuff here $semaphore->up(5); # Increment the counter by five } $thr1->detach(); $thr2->detach(); If C<down()> attempts to decrement the counter below zero, it blocks until the counter is large enough. Note that while a semaphore can be created with a starting count of zero, any C<up()> or C<down()> always changes the counter by at least one, and so C<< $semaphore->down(0) >> is the same as C<< $semaphore->down(1) >>. The question, of course, is why would you do something like this? Why create a semaphore with a starting count that's not one, or why decrement or increment it by more than one? The answer is resource availability. Many resources that you want to manage access for can be safely used by more than one thread at once. For example, let's take a GUI driven program. It has a semaphore that it uses to synchronize access to the display, so only one thread is ever drawing at once. Handy, but of course you don't want any thread to start drawing until things are properly set up. In this case, you can create a semaphore with a counter set to zero, and up it when things are ready for drawing. Semaphores with counters greater than one are also useful for establishing quotas. Say, for example, that you have a number of threads that can do I/O at once. You don't want all the threads reading or writing at once though, since that can potentially swamp your I/O channels, or deplete your process's quota of filehandles. You can use a semaphore initialized to the number of concurrent I/O requests (or open files) that you want at any one time, and have your threads quietly block and unblock themselves. Larger increments or decrements are handy in those cases where a thread needs to check out or return a number of resources at once. =head2 Waiting for a Condition The functions C<cond_wait()> and C<cond_signal()> can be used in conjunction with locks to notify co-operating threads that a resource has become available. They are very similar in use to the functions found in C<pthreads>. However for most purposes, queues are simpler to use and more intuitive. See L<threads::shared> for more details. =head2 Giving up control There are times when you may find it useful to have a thread explicitly give up the CPU to another thread. You may be doing something processor-intensive and want to make sure that the user-interface thread gets called frequently. Regardless, there are times that you might want a thread to give up the processor. Perl's threading package provides the C<yield()> function that does this. C<yield()> is pretty straightforward, and works like this: use threads; sub loop { my $thread = shift; my $foo = 50; while($foo--) { print("In thread $thread\n"); } threads->yield(); $foo = 50; while($foo--) { print("In thread $thread\n"); } } my $thr1 = threads->create(\&loop, 'first'); my $thr2 = threads->create(\&loop, 'second'); my $thr3 = threads->create(\&loop, 'third'); It is important to remember that C<yield()> is only a hint to give up the CPU, it depends on your hardware, OS and threading libraries what actually happens. B<On many operating systems, yield() is a no-op.> Therefore it is important to note that one should not build the scheduling of the threads around C<yield()> calls. It might work on your platform but it won't work on another platform. =head1 General Thread Utility Routines We've covered the workhorse parts of Perl's threading package, and with these tools you should be well on your way to writing threaded code and packages. There are a few useful little pieces that didn't really fit in anyplace else. =head2 What Thread Am I In? The C<threads-E<gt>self()> class method provides your program with a way to get an object representing the thread it's currently in. You can use this object in the same way as the ones returned from thread creation. =head2 Thread IDs C<tid()> is a thread object method that returns the thread ID of the thread the object represents. Thread IDs are integers, with the main thread in a program being 0. Currently Perl assigns a unique TID to every thread ever created in your program, assigning the first thread to be created a TID of 1, and increasing the TID by 1 for each new thread that's created. When used as a class method, C<threads-E<gt>tid()> can be used by a thread to get its own TID. =head2 Are These Threads The Same? The C<equal()> method takes two thread objects and returns true if the objects represent the same thread, and false if they don't. Thread objects also have an overloaded C<==> comparison so that you can do comparison on them as you would with normal objects. =head2 What Threads Are Running? C<threads-E<gt>list()> returns a list of thread objects, one for each thread that's currently running and not detached. Handy for a number of things, including cleaning up at the end of your program (from the main Perl thread, of course): # Loop through all the threads foreach my $thr (threads->list()) { $thr->join(); } If some threads have not finished running when the main Perl thread ends, Perl will warn you about it and die, since it is impossible for Perl to clean up itself while other threads are running. NOTE: The main Perl thread (thread 0) is in a I<detached> state, and so does not appear in the list returned by C<threads-E<gt>list()>. =head1 A Complete Example Confused yet? It's time for an example program to show some of the things we've covered. This program finds prime numbers using threads. 1 #!/usr/bin/perl 2 # prime-pthread, courtesy of Tom Christiansen 3 4 use strict; 5 use warnings; 6 7 use threads; 8 use Thread::Queue; 9 10 sub check_num { 11 my ($upstream, $cur_prime) = @_; 12 my $kid; 13 my $downstream = Thread::Queue->new(); 14 while (my $num = $upstream->dequeue()) { 15 next unless ($num % $cur_prime); 16 if ($kid) { 17 $downstream->enqueue($num); 18 } else { 19 print("Found prime: $num\n"); 20 $kid = threads->create(\&check_num, $downstream, $num); 21 if (! $kid) { 22 warn("Sorry. Ran out of threads.\n"); 23 last; 24 } 25 } 26 } 27 if ($kid) { 28 $downstream->enqueue(undef); 29 $kid->join(); 30 } 31 } 32 33 my $stream = Thread::Queue->new(3..1000, undef); 34 check_num($stream, 2); This program uses the pipeline model to generate prime numbers. Each thread in the pipeline has an input queue that feeds numbers to be checked, a prime number that it's responsible for, and an output queue into which it funnels numbers that have failed the check. If the thread has a number that's failed its check and there's no child thread, then the thread must have found a new prime number. In that case, a new child thread is created for that prime and stuck on the end of the pipeline. This probably sounds a bit more confusing than it really is, so let's go through this program piece by piece and see what it does. (For those of you who might be trying to remember exactly what a prime number is, it's a number that's only evenly divisible by itself and 1.) The bulk of the work is done by the C<check_num()> subroutine, which takes a reference to its input queue and a prime number that it's responsible for. After pulling in the input queue and the prime that the subroutine is checking (line 11), we create a new queue (line 13) and reserve a scalar for the thread that we're likely to create later (line 12). The while loop from line 14 to line 26 grabs a scalar off the input queue and checks against the prime this thread is responsible for. Line 15 checks to see if there's a remainder when we divide the number to be checked by our prime. If there is one, the number must not be evenly divisible by our prime, so we need to either pass it on to the next thread if we've created one (line 17) or create a new thread if we haven't. The new thread creation is line 20. We pass on to it a reference to the queue we've created, and the prime number we've found. In lines 21 through 24, we check to make sure that our new thread got created, and if not, we stop checking any remaining numbers in the queue. Finally, once the loop terminates (because we got a 0 or C<undef> in the queue, which serves as a note to terminate), we pass on the notice to our child, and wait for it to exit if we've created a child (lines 27 and 30). Meanwhile, back in the main thread, we first create a queue (line 33) and queue up all the numbers from 3 to 1000 for checking, plus a termination notice. Then all we have to do to get the ball rolling is pass the queue and the first prime to the C<check_num()> subroutine (line 34). That's how it works. It's pretty simple; as with many Perl programs, the explanation is much longer than the program. =head1 Different implementations of threads Some background on thread implementations from the operating system viewpoint. There are three basic categories of threads: user-mode threads, kernel threads, and multiprocessor kernel threads. User-mode threads are threads that live entirely within a program and its libraries. In this model, the OS knows nothing about threads. As far as it's concerned, your process is just a process. This is the easiest way to implement threads, and the way most OSes start. The big disadvantage is that, since the OS knows nothing about threads, if one thread blocks they all do. Typical blocking activities include most system calls, most I/O, and things like C<sleep()>. Kernel threads are the next step in thread evolution. The OS knows about kernel threads, and makes allowances for them. The main difference between a kernel thread and a user-mode thread is blocking. With kernel threads, things that block a single thread don't block other threads. This is not the case with user-mode threads, where the kernel blocks at the process level and not the thread level. This is a big step forward, and can give a threaded program quite a performance boost over non-threaded programs. Threads that block performing I/O, for example, won't block threads that are doing other things. Each process still has only one thread running at once, though, regardless of how many CPUs a system might have. Since kernel threading can interrupt a thread at any time, they will uncover some of the implicit locking assumptions you may make in your program. For example, something as simple as C<$x = $x + 2> can behave unpredictably with kernel threads if C<$x> is visible to other threads, as another thread may have changed C<$x> between the time it was fetched on the right hand side and the time the new value is stored. Multiprocessor kernel threads are the final step in thread support. With multiprocessor kernel threads on a machine with multiple CPUs, the OS may schedule two or more threads to run simultaneously on different CPUs. This can give a serious performance boost to your threaded program, since more than one thread will be executing at the same time. As a tradeoff, though, any of those nagging synchronization issues that might not have shown with basic kernel threads will appear with a vengeance. In addition to the different levels of OS involvement in threads, different OSes (and different thread implementations for a particular OS) allocate CPU cycles to threads in different ways. Cooperative multitasking systems have running threads give up control if one of two things happen. If a thread calls a yield function, it gives up control. It also gives up control if the thread does something that would cause it to block, such as perform I/O. In a cooperative multitasking implementation, one thread can starve all the others for CPU time if it so chooses. Preemptive multitasking systems interrupt threads at regular intervals while the system decides which thread should run next. In a preemptive multitasking system, one thread usually won't monopolize the CPU. On some systems, there can be cooperative and preemptive threads running simultaneously. (Threads running with realtime priorities often behave cooperatively, for example, while threads running at normal priorities behave preemptively.) Most modern operating systems support preemptive multitasking nowadays. =head1 Performance considerations The main thing to bear in mind when comparing Perl's I<ithreads> to other threading models is the fact that for each new thread created, a complete copy of all the variables and data of the parent thread has to be taken. Thus, thread creation can be quite expensive, both in terms of memory usage and time spent in creation. The ideal way to reduce these costs is to have a relatively short number of long-lived threads, all created fairly early on (before the base thread has accumulated too much data). Of course, this may not always be possible, so compromises have to be made. However, after a thread has been created, its performance and extra memory usage should be little different than ordinary code. Also note that under the current implementation, shared variables use a little more memory and are a little slower than ordinary variables. =head1 Process-scope Changes Note that while threads themselves are separate execution threads and Perl data is thread-private unless explicitly shared, the threads can affect process-scope state, affecting all the threads. The most common example of this is changing the current working directory using C<chdir()>. One thread calls C<chdir()>, and the working directory of all the threads changes. Even more drastic example of a process-scope change is C<chroot()>: the root directory of all the threads changes, and no thread can undo it (as opposed to C<chdir()>). Further examples of process-scope changes include C<umask()> and changing uids and gids. Thinking of mixing C<fork()> and threads? Please lie down and wait until the feeling passes. Be aware that the semantics of C<fork()> vary between platforms. For example, some Unix systems copy all the current threads into the child process, while others only copy the thread that called C<fork()>. You have been warned! Similarly, mixing signals and threads may be problematic. Implementations are platform-dependent, and even the POSIX semantics may not be what you expect (and Perl doesn't even give you the full POSIX API). For example, there is no way to guarantee that a signal sent to a multi-threaded Perl application will get intercepted by any particular thread. (However, a recently added feature does provide the capability to send signals between threads. See L<threads/THREAD SIGNALLING> for more details.) =head1 Thread-Safety of System Libraries Whether various library calls are thread-safe is outside the control of Perl. Calls often suffering from not being thread-safe include: C<localtime()>, C<gmtime()>, functions fetching user, group and network information (such as C<getgrent()>, C<gethostent()>, C<getnetent()> and so on), C<readdir()>, C<rand()>, and C<srand()>. In general, calls that depend on some global external state. If the system Perl is compiled in has thread-safe variants of such calls, they will be used. Beyond that, Perl is at the mercy of the thread-safety or -unsafety of the calls. Please consult your C library call documentation. On some platforms the thread-safe library interfaces may fail if the result buffer is too small (for example the user group databases may be rather large, and the reentrant interfaces may have to carry around a full snapshot of those databases). Perl will start with a small buffer, but keep retrying and growing the result buffer until the result fits. If this limitless growing sounds bad for security or memory consumption reasons you can recompile Perl with C<PERL_REENTRANT_MAXSIZE> defined to the maximum number of bytes you will allow. =head1 Conclusion A complete thread tutorial could fill a book (and has, many times), but with what we've covered in this introduction, you should be well on your way to becoming a threaded Perl expert. =head1 SEE ALSO Annotated POD for L<threads>: L<https://web.archive.org/web/20171028020148/http://annocpan.org/?mode=search&field=Module&name=threads> Latest version of L<threads> on CPAN: L<https://metacpan.org/pod/threads> Annotated POD for L<threads::shared>: L<https://web.archive.org/web/20171028020148/http://annocpan.org/?mode=search&field=Module&name=threads%3A%3Ashared> Latest version of L<threads::shared> on CPAN: L<https://metacpan.org/pod/threads::shared> Perl threads mailing list: L<https://lists.perl.org/list/ithreads.html> =head1 Bibliography Here's a short bibliography courtesy of Jürgen Christoffel: =head2 Introductory Texts Birrell, Andrew D. An Introduction to Programming with Threads. Digital Equipment Corporation, 1989, DEC-SRC Research Report #35 online as L<https://www.hpl.hp.com/techreports/Compaq-DEC/SRC-RR-35.pdf> (highly recommended) Robbins, Kay. A., and Steven Robbins. Practical Unix Programming: A Guide to Concurrency, Communication, and Multithreading. Prentice-Hall, 1996. Lewis, Bill, and Daniel J. Berg. Multithreaded Programming with Pthreads. Prentice Hall, 1997, ISBN 0-13-443698-9 (a well-written introduction to threads). Nelson, Greg (editor). Systems Programming with Modula-3. Prentice Hall, 1991, ISBN 0-13-590464-1. Nichols, Bradford, Dick Buttlar, and Jacqueline Proulx Farrell. Pthreads Programming. O'Reilly & Associates, 1996, ISBN 156592-115-1 (covers POSIX threads). =head2 OS-Related References Boykin, Joseph, David Kirschen, Alan Langerman, and Susan LoVerso. Programming under Mach. Addison-Wesley, 1994, ISBN 0-201-52739-1. Tanenbaum, Andrew S. Distributed Operating Systems. Prentice Hall, 1995, ISBN 0-13-219908-4 (great textbook). Silberschatz, Abraham, and Peter B. Galvin. Operating System Concepts, 4th ed. Addison-Wesley, 1995, ISBN 0-201-59292-4 =head2 Other References Arnold, Ken and James Gosling. The Java Programming Language, 2nd ed. Addison-Wesley, 1998, ISBN 0-201-31006-6. comp.programming.threads FAQ, L<http://www.serpentine.com/~bos/threads-faq/> Le Sergent, T. and B. Berthomieu. "Incremental MultiThreaded Garbage Collection on Virtually Shared Memory Architectures" in Memory Management: Proc. of the International Workshop IWMM 92, St. Malo, France, September 1992, Yves Bekkers and Jacques Cohen, eds. Springer, 1992, ISBN 3540-55940-X (real-life thread applications). Artur Bergman, "Where Wizards Fear To Tread", June 11, 2002, L<http://www.perl.com/pub/a/2002/06/11/threads.html> =head1 Acknowledgements Thanks (in no particular order) to Chaim Frenkel, Steve Fink, Gurusamy Sarathy, Ilya Zakharevich, Benjamin Sugars, Jürgen Christoffel, Joshua Pritikin, and Alan Burlison, for their help in reality-checking and polishing this article. Big thanks to Tom Christiansen for his rewrite of the prime number generator. =head1 AUTHOR Dan Sugalski E<lt>dan@sidhe.orgE<gt> Slightly modified by Arthur Bergman to fit the new thread model/module. Reworked slightly by Jörg Walter E<lt>jwalt@cpan.orgE<gt> to be more concise about thread-safety of Perl code. Rearranged slightly by Elizabeth Mattijsen E<lt>liz@dijkmat.nlE<gt> to put less emphasis on yield(). =head1 Copyrights The original version of this article originally appeared in The Perl Journal #10, and is copyright 1998 The Perl Journal. It appears courtesy of Jon Orwant and The Perl Journal. This document may be distributed under the same terms as Perl itself. =cut perl5125delta.pod 0000644 00000017003 15125556335 0007554 0 ustar 00 =encoding utf8 =head1 NAME perl5125delta - what is new for perl v5.12.5 =head1 DESCRIPTION This document describes differences between the 5.12.4 release and the 5.12.5 release. If you are upgrading from an earlier release such as 5.12.3, first read L<perl5124delta>, which describes differences between 5.12.3 and 5.12.4. =head1 Security =head2 C<Encode> decode_xs n-byte heap-overflow (CVE-2011-2939) A bug in C<Encode> could, on certain inputs, cause the heap to overflow. This problem has been corrected. Bug reported by Robert Zacek. =head2 C<File::Glob::bsd_glob()> memory error with GLOB_ALTDIRFUNC (CVE-2011-2728). Calling C<File::Glob::bsd_glob> with the unsupported flag GLOB_ALTDIRFUNC would cause an access violation / segfault. A Perl program that accepts a flags value from an external source could expose itself to denial of service or arbitrary code execution attacks. There are no known exploits in the wild. The problem has been corrected by explicitly disabling all unsupported flags and setting unused function pointers to null. Bug reported by Clément Lecigne. =head2 Heap buffer overrun in 'x' string repeat operator (CVE-2012-5195) Poorly written perl code that allows an attacker to specify the count to perl's 'x' string repeat operator can already cause a memory exhaustion denial-of-service attack. A flaw in versions of perl before 5.15.5 can escalate that into a heap buffer overrun; coupled with versions of glibc before 2.16, it possibly allows the execution of arbitrary code. This problem has been fixed. =head1 Incompatible Changes There are no changes intentionally incompatible with 5.12.4. If any exist, they are bugs and reports are welcome. =head1 Modules and Pragmata =head2 Updated Modules =head3 L<B::Concise> L<B::Concise> no longer produces mangled output with the B<-tree> option [perl #80632]. =head3 L<charnames> A regression introduced in Perl 5.8.8 has been fixed, that caused C<charnames::viacode(0)> to return C<undef> instead of the string "NULL" [perl #72624]. =head3 L<Encode> has been upgraded from version 2.39 to version 2.39_01. See L</Security>. =head3 L<File::Glob> has been upgraded from version 1.07 to version 1.07_01. See L</Security>. =head3 L<Unicode::UCD> The documentation for the C<upper> function now actually says "upper", not "lower". =head3 L<Module::CoreList> L<Module::CoreList> has been updated to version 2.50_02 to add data for this release. =head1 Changes to Existing Documentation =head2 L<perlebcdic> The L<perlebcdic> document contains a helpful table to use in C<tr///> to convert between EBCDIC and Latin1/ASCII. Unfortunately, the table was the inverse of the one it describes. This has been corrected. =head2 L<perlunicode> The section on L<User-Defined Case Mappings|perlunicode/User-Defined Case Mappings> had some bad markup and unclear sentences, making parts of it unreadable. This has been rectified. =head2 L<perluniprops> This document has been corrected to take non-ASCII platforms into account. =head1 Installation and Configuration Improvements =head2 Platform Specific Changes =over 4 =item Mac OS X There have been configuration and test fixes to make Perl build cleanly on Lion and Mountain Lion. =item NetBSD The NetBSD hints file was corrected to be compatible with NetBSD 6.* =back =head1 Selected Bug Fixes =over 4 =item * C<chop> now correctly handles characters above "\x{7fffffff}" [perl #73246]. =item * C<< ($<,$>) = (...) >> stopped working properly in 5.12.0. It is supposed to make a single C<setreuid()> call, rather than calling C<setruid()> and C<seteuid()> separately. Consequently it did not work properly. This has been fixed [perl #75212]. =item * Fixed a regression of kill() when a match variable is used for the process ID to kill [perl #75812]. =item * C<UNIVERSAL::VERSION> no longer leaks memory. It started leaking in Perl 5.10.0. =item * The C-level C<my_strftime> functions no longer leaks memory. This fixes a memory leak in C<POSIX::strftime> [perl #73520]. =item * C<caller> no longer leaks memory when called from the DB package if C<@DB::args> was assigned to after the first call to C<caller>. L<Carp> was triggering this bug [perl #97010]. =item * Passing to C<index> an offset beyond the end of the string when the string is encoded internally in UTF8 no longer causes panics [perl #75898]. =item * Syntax errors in C<< (?{...}) >> blocks in regular expressions no longer cause panic messages [perl #2353]. =item * Perl 5.10.0 introduced some faulty logic that made "U*" in the middle of a pack template equivalent to "U0" if the input string was empty. This has been fixed [perl #90160]. =back =head1 Errata =head2 split() and C<@_> split() no longer modifies C<@_> when called in scalar or void context. In void context it now produces a "Useless use of split" warning. This is actually a change introduced in perl 5.12.0, but it was missed from that release's L<perl5120delta>. =head1 Acknowledgements Perl 5.12.5 represents approximately 17 months of development since Perl 5.12.4 and contains approximately 1,900 lines of changes across 64 files from 18 authors. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.12.5: Andy Dougherty, Chris 'BinGOs' Williams, Craig A. Berry, David Mitchell, Dominic Hargreaves, Father Chrysostomos, Florian Ragwitz, George Greer, Goro Fuji, Jesse Vincent, Karl Williamson, Leon Brocard, Nicholas Clark, Rafael Garcia-Suarez, Reini Urban, Ricardo Signes, Steve Hay, Tony Cook. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perl5101delta.pod 0000644 00000125560 15125556335 0007556 0 ustar 00 =head1 NAME perl5101delta - what is new for perl v5.10.1 =head1 DESCRIPTION This document describes differences between the 5.10.0 release and the 5.10.1 release. If you are upgrading from an earlier release such as 5.8.8, first read the L<perl5100delta>, which describes differences between 5.8.8 and 5.10.0 =head1 Incompatible Changes =head2 Switch statement changes The handling of complex expressions by the C<given>/C<when> switch statement has been enhanced. There are two new cases where C<when> now interprets its argument as a boolean, instead of an expression to be used in a smart match: =over 4 =item flip-flop operators The C<..> and C<...> flip-flop operators are now evaluated in boolean context, following their usual semantics; see L<perlop/"Range Operators">. Note that, as in perl 5.10.0, C<when (1..10)> will not work to test whether a given value is an integer between 1 and 10; you should use C<when ([1..10])> instead (note the array reference). However, contrary to 5.10.0, evaluating the flip-flop operators in boolean context ensures it can now be useful in a C<when()>, notably for implementing bistable conditions, like in: when (/^=begin/ .. /^=end/) { # do something } =item defined-or operator A compound expression involving the defined-or operator, as in C<when (expr1 // expr2)>, will be treated as boolean if the first expression is boolean. (This just extends the existing rule that applies to the regular or operator, as in C<when (expr1 || expr2)>.) =back The next section details more changes brought to the semantics to the smart match operator, that naturally also modify the behaviour of the switch statements where smart matching is implicitly used. =head2 Smart match changes =head3 Changes to type-based dispatch The smart match operator C<~~> is no longer commutative. The behaviour of a smart match now depends primarily on the type of its right hand argument. Moreover, its semantics have been adjusted for greater consistency or usefulness in several cases. While the general backwards compatibility is maintained, several changes must be noted: =over 4 =item * Code references with an empty prototype are no longer treated specially. They are passed an argument like the other code references (even if they choose to ignore it). =item * C<%hash ~~ sub {}> and C<@array ~~ sub {}> now test that the subroutine returns a true value for each key of the hash (or element of the array), instead of passing the whole hash or array as a reference to the subroutine. =item * Due to the commutativity breakage, code references are no longer treated specially when appearing on the left of the C<~~> operator, but like any vulgar scalar. =item * C<undef ~~ %hash> is always false (since C<undef> can't be a key in a hash). No implicit conversion to C<""> is done (as was the case in perl 5.10.0). =item * C<$scalar ~~ @array> now always distributes the smart match across the elements of the array. It's true if one element in @array verifies C<$scalar ~~ $element>. This is a generalization of the old behaviour that tested whether the array contained the scalar. =back The full dispatch table for the smart match operator is given in L<perlsyn/"Smart matching in detail">. =head3 Smart match and overloading According to the rule of dispatch based on the rightmost argument type, when an object overloading C<~~> appears on the right side of the operator, the overload routine will always be called (with a 3rd argument set to a true value, see L<overload>.) However, when the object will appear on the left, the overload routine will be called only when the rightmost argument is a simple scalar. This way distributivity of smart match across arrays is not broken, as well as the other behaviours with complex types (coderefs, hashes, regexes). Thus, writers of overloading routines for smart match mostly need to worry only with comparing against a scalar, and possibly with stringification overloading; the other common cases will be automatically handled consistently. C<~~> will now refuse to work on objects that do not overload it (in order to avoid relying on the object's underlying structure). (However, if the object overloads the stringification or the numification operators, and if overload fallback is active, it will be used instead, as usual.) =head2 Other incompatible changes =over 4 =item * The semantics of C<use feature :5.10*> have changed slightly. See L</"Modules and Pragmata"> for more information. =item * It is now a run-time error to use the smart match operator C<~~> with an object that has no overload defined for it. (This way C<~~> will not break encapsulation by matching against the object's internal representation as a reference.) =item * The version control system used for the development of the perl interpreter has been switched from Perforce to git. This is mainly an internal issue that only affects people actively working on the perl core; but it may have minor external visibility, for example in some of details of the output of C<perl -V>. See L<perlrepository> for more information. =item * The internal structure of the C<ext/> directory in the perl source has been reorganised. In general, a module C<Foo::Bar> whose source was stored under F<ext/Foo/Bar/> is now located under F<ext/Foo-Bar/>. Also, some modules have been moved from F<lib/> to F<ext/>. This is purely a source tarball change, and should make no difference to the compilation or installation of perl, unless you have a very customised build process that explicitly relies on this structure, or which hard-codes the C<nonxs_ext> F<Configure> parameter. Specifically, this change does not by default alter the location of any files in the final installation. =item * As part of the C<Test::Harness> 2.x to 3.x upgrade, the experimental C<Test::Harness::Straps> module has been removed. See L</"Updated Modules"> for more details. =item * As part of the C<ExtUtils::MakeMaker> upgrade, the C<ExtUtils::MakeMaker::bytes> and C<ExtUtils::MakeMaker::vmsish> modules have been removed from this distribution. =item * C<Module::CoreList> no longer contains the C<%:patchlevel> hash. =item * This one is actually a change introduced in 5.10.0, but it was missed from that release's perldelta, so it is mentioned here instead. A bugfix related to the handling of the C</m> modifier and C<qr> resulted in a change of behaviour between 5.8.x and 5.10.0: # matches in 5.8.x, doesn't match in 5.10.0 $re = qr/^bar/; "foo\nbar" =~ /$re/m; =back =head1 Core Enhancements =head2 Unicode Character Database 5.1.0 The copy of the Unicode Character Database included in Perl 5.10.1 has been updated to 5.1.0 from 5.0.0. See L<http://www.unicode.org/versions/Unicode5.1.0/#Notable_Changes> for the notable changes. =head2 A proper interface for pluggable Method Resolution Orders As of Perl 5.10.1 there is a new interface for plugging and using method resolution orders other than the default (linear depth first search). The C3 method resolution order added in 5.10.0 has been re-implemented as a plugin, without changing its Perl-space interface. See L<perlmroapi> for more information. =head2 The C<overloading> pragma This pragma allows you to lexically disable or enable overloading for some or all operations. (Yuval Kogman) =head2 Parallel tests The core distribution can now run its regression tests in parallel on Unix-like platforms. Instead of running C<make test>, set C<TEST_JOBS> in your environment to the number of tests to run in parallel, and run C<make test_harness>. On a Bourne-like shell, this can be done as TEST_JOBS=3 make test_harness # Run 3 tests in parallel An environment variable is used, rather than parallel make itself, because L<TAP::Harness> needs to be able to schedule individual non-conflicting test scripts itself, and there is no standard interface to C<make> utilities to interact with their job schedulers. Note that currently some test scripts may fail when run in parallel (most notably C<ext/IO/t/io_dir.t>). If necessary run just the failing scripts again sequentially and see if the failures go away. =head2 DTrace support Some support for DTrace has been added. See "DTrace support" in F<INSTALL>. =head2 Support for C<configure_requires> in CPAN module metadata Both C<CPAN> and C<CPANPLUS> now support the C<configure_requires> keyword in the C<META.yml> metadata file included in most recent CPAN distributions. This allows distribution authors to specify configuration prerequisites that must be installed before running F<Makefile.PL> or F<Build.PL>. See the documentation for C<ExtUtils::MakeMaker> or C<Module::Build> for more on how to specify C<configure_requires> when creating a distribution for CPAN. =head1 Modules and Pragmata =head2 New Modules and Pragmata =over 4 =item C<autodie> This is a new lexically-scoped alternative for the C<Fatal> module. The bundled version is 2.06_01. Note that in this release, using a string eval when C<autodie> is in effect can cause the autodie behaviour to leak into the surrounding scope. See L<autodie/"BUGS"> for more details. =item C<Compress::Raw::Bzip2> This has been added to the core (version 2.020). =item C<parent> This pragma establishes an ISA relationship with base classes at compile time. It provides the key feature of C<base> without the feature creep. =item C<Parse::CPAN::Meta> This has been added to the core (version 1.39). =back =head2 Pragmata Changes =over 4 =item C<attributes> Upgraded from version 0.08 to 0.09. =item C<attrs> Upgraded from version 1.02 to 1.03. =item C<base> Upgraded from version 2.13 to 2.14. See L<parent> for a replacement. =item C<bigint> Upgraded from version 0.22 to 0.23. =item C<bignum> Upgraded from version 0.22 to 0.23. =item C<bigrat> Upgraded from version 0.22 to 0.23. =item C<charnames> Upgraded from version 1.06 to 1.07. The Unicode F<NameAliases.txt> database file has been added. This has the effect of adding some extra C<\N> character names that formerly wouldn't have been recognised; for example, C<"\N{LATIN CAPITAL LETTER GHA}">. =item C<constant> Upgraded from version 1.13 to 1.17. =item C<feature> The meaning of the C<:5.10> and C<:5.10.X> feature bundles has changed slightly. The last component, if any (i.e. C<X>) is simply ignored. This is predicated on the assumption that new features will not, in general, be added to maintenance releases. So C<:5.10> and C<:5.10.X> have identical effect. This is a change to the behaviour documented for 5.10.0. =item C<fields> Upgraded from version 2.13 to 2.14 (this was just a version bump; there were no functional changes). =item C<lib> Upgraded from version 0.5565 to 0.62. =item C<open> Upgraded from version 1.06 to 1.07. =item C<overload> Upgraded from version 1.06 to 1.07. =item C<overloading> See L</"The C<overloading> pragma"> above. =item C<version> Upgraded from version 0.74 to 0.77. =back =head2 Updated Modules =over 4 =item C<Archive::Extract> Upgraded from version 0.24 to 0.34. =item C<Archive::Tar> Upgraded from version 1.38 to 1.52. =item C<Attribute::Handlers> Upgraded from version 0.79 to 0.85. =item C<AutoLoader> Upgraded from version 5.63 to 5.68. =item C<AutoSplit> Upgraded from version 1.05 to 1.06. =item C<B> Upgraded from version 1.17 to 1.22. =item C<B::Debug> Upgraded from version 1.05 to 1.11. =item C<B::Deparse> Upgraded from version 0.83 to 0.89. =item C<B::Lint> Upgraded from version 1.09 to 1.11. =item C<B::Xref> Upgraded from version 1.01 to 1.02. =item C<Benchmark> Upgraded from version 1.10 to 1.11. =item C<Carp> Upgraded from version 1.08 to 1.11. =item C<CGI> Upgraded from version 3.29 to 3.43. (also includes the "default_value for popup_menu()" fix from 3.45). =item C<Compress::Zlib> Upgraded from version 2.008 to 2.020. =item C<CPAN> Upgraded from version 1.9205 to 1.9402. C<CPAN::FTP> has a local fix to stop it being too verbose on download failure. =item C<CPANPLUS> Upgraded from version 0.84 to 0.88. =item C<CPANPLUS::Dist::Build> Upgraded from version 0.06_02 to 0.36. =item C<Cwd> Upgraded from version 3.25_01 to 3.30. =item C<Data::Dumper> Upgraded from version 2.121_14 to 2.124. =item C<DB> Upgraded from version 1.01 to 1.02. =item C<DB_File> Upgraded from version 1.816_1 to 1.820. =item C<Devel::PPPort> Upgraded from version 3.13 to 3.19. =item C<Digest::MD5> Upgraded from version 2.36_01 to 2.39. =item C<Digest::SHA> Upgraded from version 5.45 to 5.47. =item C<DirHandle> Upgraded from version 1.01 to 1.03. =item C<Dumpvalue> Upgraded from version 1.12 to 1.13. =item C<DynaLoader> Upgraded from version 1.08 to 1.10. =item C<Encode> Upgraded from version 2.23 to 2.35. =item C<Errno> Upgraded from version 1.10 to 1.11. =item C<Exporter> Upgraded from version 5.62 to 5.63. =item C<ExtUtils::CBuilder> Upgraded from version 0.21 to 0.2602. =item C<ExtUtils::Command> Upgraded from version 1.13 to 1.16. =item C<ExtUtils::Constant> Upgraded from 0.20 to 0.22. (Note that neither of these versions are available on CPAN.) =item C<ExtUtils::Embed> Upgraded from version 1.27 to 1.28. =item C<ExtUtils::Install> Upgraded from version 1.44 to 1.54. =item C<ExtUtils::MakeMaker> Upgraded from version 6.42 to 6.55_02. Note that C<ExtUtils::MakeMaker::bytes> and C<ExtUtils::MakeMaker::vmsish> have been removed from this distribution. =item C<ExtUtils::Manifest> Upgraded from version 1.51_01 to 1.56. =item C<ExtUtils::ParseXS> Upgraded from version 2.18_02 to 2.2002. =item C<Fatal> Upgraded from version 1.05 to 2.06_01. See also the new pragma C<autodie>. =item C<File::Basename> Upgraded from version 2.76 to 2.77. =item C<File::Compare> Upgraded from version 1.1005 to 1.1006. =item C<File::Copy> Upgraded from version 2.11 to 2.14. =item C<File::Fetch> Upgraded from version 0.14 to 0.20. =item C<File::Find> Upgraded from version 1.12 to 1.14. =item C<File::Path> Upgraded from version 2.04 to 2.07_03. =item C<File::Spec> Upgraded from version 3.2501 to 3.30. =item C<File::stat> Upgraded from version 1.00 to 1.01. =item C<File::Temp> Upgraded from version 0.18 to 0.22. =item C<FileCache> Upgraded from version 1.07 to 1.08. =item C<FileHandle> Upgraded from version 2.01 to 2.02. =item C<Filter::Simple> Upgraded from version 0.82 to 0.84. =item C<Filter::Util::Call> Upgraded from version 1.07 to 1.08. =item C<FindBin> Upgraded from version 1.49 to 1.50. =item C<GDBM_File> Upgraded from version 1.08 to 1.09. =item C<Getopt::Long> Upgraded from version 2.37 to 2.38. =item C<Hash::Util::FieldHash> Upgraded from version 1.03 to 1.04. This fixes a memory leak. =item C<I18N::Collate> Upgraded from version 1.00 to 1.01. =item C<IO> Upgraded from version 1.23_01 to 1.25. This makes non-blocking mode work on Windows in C<IO::Socket::INET> [CPAN #43573]. =item C<IO::Compress::*> Upgraded from version 2.008 to 2.020. =item C<IO::Dir> Upgraded from version 1.06 to 1.07. =item C<IO::Handle> Upgraded from version 1.27 to 1.28. =item C<IO::Socket> Upgraded from version 1.30_01 to 1.31. =item C<IO::Zlib> Upgraded from version 1.07 to 1.09. =item C<IPC::Cmd> Upgraded from version 0.40_1 to 0.46. =item C<IPC::Open3> Upgraded from version 1.02 to 1.04. =item C<IPC::SysV> Upgraded from version 1.05 to 2.01. =item C<lib> Upgraded from version 0.5565 to 0.62. =item C<List::Util> Upgraded from version 1.19 to 1.21. =item C<Locale::MakeText> Upgraded from version 1.12 to 1.13. =item C<Log::Message> Upgraded from version 0.01 to 0.02. =item C<Math::BigFloat> Upgraded from version 1.59 to 1.60. =item C<Math::BigInt> Upgraded from version 1.88 to 1.89. =item C<Math::BigInt::FastCalc> Upgraded from version 0.16 to 0.19. =item C<Math::BigRat> Upgraded from version 0.21 to 0.22. =item C<Math::Complex> Upgraded from version 1.37 to 1.56. =item C<Math::Trig> Upgraded from version 1.04 to 1.20. =item C<Memoize> Upgraded from version 1.01_02 to 1.01_03 (just a minor documentation change). =item C<Module::Build> Upgraded from version 0.2808_01 to 0.34_02. =item C<Module::CoreList> Upgraded from version 2.13 to 2.18. This release no longer contains the C<%Module::CoreList::patchlevel> hash. =item C<Module::Load> Upgraded from version 0.12 to 0.16. =item C<Module::Load::Conditional> Upgraded from version 0.22 to 0.30. =item C<Module::Loaded> Upgraded from version 0.01 to 0.02. =item C<Module::Pluggable> Upgraded from version 3.6 to 3.9. =item C<NDBM_File> Upgraded from version 1.07 to 1.08. =item C<Net::Ping> Upgraded from version 2.33 to 2.36. =item C<NEXT> Upgraded from version 0.60_01 to 0.64. =item C<Object::Accessor> Upgraded from version 0.32 to 0.34. =item C<OS2::REXX> Upgraded from version 1.03 to 1.04. =item C<Package::Constants> Upgraded from version 0.01 to 0.02. =item C<PerlIO> Upgraded from version 1.04 to 1.06. =item C<PerlIO::via> Upgraded from version 0.04 to 0.07. =item C<Pod::Man> Upgraded from version 2.16 to 2.22. =item C<Pod::Parser> Upgraded from version 1.35 to 1.37. =item C<Pod::Simple> Upgraded from version 3.05 to 3.07. =item C<Pod::Text> Upgraded from version 3.08 to 3.13. =item C<POSIX> Upgraded from version 1.13 to 1.17. =item C<Safe> Upgraded from 2.12 to 2.18. =item C<Scalar::Util> Upgraded from version 1.19 to 1.21. =item C<SelectSaver> Upgraded from 1.01 to 1.02. =item C<SelfLoader> Upgraded from 1.11 to 1.17. =item C<Socket> Upgraded from 1.80 to 1.82. =item C<Storable> Upgraded from 2.18 to 2.20. =item C<Switch> Upgraded from version 2.13 to 2.14. Please see L</Deprecations>. =item C<Symbol> Upgraded from version 1.06 to 1.07. =item C<Sys::Syslog> Upgraded from version 0.22 to 0.27. =item C<Term::ANSIColor> Upgraded from version 1.12 to 2.00. =item C<Term::ReadLine> Upgraded from version 1.03 to 1.04. =item C<Term::UI> Upgraded from version 0.18 to 0.20. =item C<Test::Harness> Upgraded from version 2.64 to 3.17. Note that one side-effect of the 2.x to 3.x upgrade is that the experimental C<Test::Harness::Straps> module (and its supporting C<Assert>, C<Iterator>, C<Point> and C<Results> modules) have been removed. If you still need this, then they are available in the (unmaintained) C<Test-Harness-Straps> distribution on CPAN. =item C<Test::Simple> Upgraded from version 0.72 to 0.92. =item C<Text::ParseWords> Upgraded from version 3.26 to 3.27. =item C<Text::Tabs> Upgraded from version 2007.1117 to 2009.0305. =item C<Text::Wrap> Upgraded from version 2006.1117 to 2009.0305. =item C<Thread::Queue> Upgraded from version 2.00 to 2.11. =item C<Thread::Semaphore> Upgraded from version 2.01 to 2.09. =item C<threads> Upgraded from version 1.67 to 1.72. =item C<threads::shared> Upgraded from version 1.14 to 1.29. =item C<Tie::RefHash> Upgraded from version 1.37 to 1.38. =item C<Tie::StdHandle> This has documentation changes, and has been assigned a version for the first time: version 4.2. =item C<Time::HiRes> Upgraded from version 1.9711 to 1.9719. =item C<Time::Local> Upgraded from version 1.18 to 1.1901. =item C<Time::Piece> Upgraded from version 1.12 to 1.15. =item C<Unicode::Normalize> Upgraded from version 1.02 to 1.03. =item C<Unicode::UCD> Upgraded from version 0.25 to 0.27. C<charinfo()> now works on Unified CJK code points added to later versions of Unicode. C<casefold()> has new fields returned to provide both a simpler interface and previously missing information. The old fields are retained for backwards compatibility. Information about Turkic-specific code points is now returned. The documentation has been corrected and expanded. =item C<UNIVERSAL> Upgraded from version 1.04 to 1.05. =item C<Win32> Upgraded from version 0.34 to 0.39. =item C<Win32API::File> Upgraded from version 0.1001_01 to 0.1101. =item C<XSLoader> Upgraded from version 0.08 to 0.10. =back =head1 Utility Changes =over 4 =item F<h2ph> Now looks in C<include-fixed> too, which is a recent addition to gcc's search path. =item F<h2xs> No longer incorrectly treats enum values like macros (Daniel Burr). Now handles C++ style constants (C<//>) properly in enums. (A patch from Rainer Weikusat was used; Daniel Burr also proposed a similar fix). =item F<perl5db.pl> C<LVALUE> subroutines now work under the debugger. The debugger now correctly handles proxy constant subroutines, and subroutine stubs. =item F<perlthanks> Perl 5.10.1 adds a new utility F<perlthanks>, which is a variant of F<perlbug>, but for sending non-bug-reports to the authors and maintainers of Perl. Getting nothing but bug reports can become a bit demoralising: we'll see if this changes things. =back =head1 New Documentation =over 4 =item L<perlhaiku> This contains instructions on how to build perl for the Haiku platform. =item L<perlmroapi> This describes the new interface for pluggable Method Resolution Orders. =item L<perlperf> This document, by Richard Foley, provides an introduction to the use of performance and optimization techniques which can be used with particular reference to perl programs. =item L<perlrepository> This describes how to access the perl source using the I<git> version control system. =item L<perlthanks> This describes the new F<perlthanks> utility. =back =head1 Changes to Existing Documentation The various large C<Changes*> files (which listed every change made to perl over the last 18 years) have been removed, and replaced by a small file, also called C<Changes>, which just explains how that same information may be extracted from the git version control system. The file F<Porting/patching.pod> has been deleted, as it mainly described interacting with the old Perforce-based repository, which is now obsolete. Information still relevant has been moved to L<perlrepository>. L<perlapi>, L<perlintern>, L<perlmodlib> and L<perltoc> are now all generated at build time, rather than being shipped as part of the release. =head1 Performance Enhancements =over 4 =item * A new internal cache means that C<isa()> will often be faster. =item * Under C<use locale>, the locale-relevant information is now cached on read-only values, such as the list returned by C<keys %hash>. This makes operations such as C<sort keys %hash> in the scope of C<use locale> much faster. =item * Empty C<DESTROY> methods are no longer called. =back =head1 Installation and Configuration Improvements =head2 F<ext/> reorganisation The layout of directories in F<ext> has been revised. Specifically, all extensions are now flat, and at the top level, with C</> in pathnames replaced by C<->, so that F<ext/Data/Dumper/> is now F<ext/Data-Dumper/>, etc. The names of the extensions as specified to F<Configure>, and as reported by C<%Config::Config> under the keys C<dynamic_ext>, C<known_extensions>, C<nonxs_ext> and C<static_ext> have not changed, and still use C</>. Hence this change will not have any affect once perl is installed. However, C<Attribute::Handlers>, C<Safe> and C<mro> have now become extensions in their own right, so if you run F<Configure> with options to specify an exact list of extensions to build, you will need to change it to account for this. For 5.10.2, it is planned that many dual-life modules will have been moved from F<lib> to F<ext>; again this will have no effect on an installed perl, but will matter if you invoke F<Configure> with a pre-canned list of extensions to build. =head2 Configuration improvements If C<vendorlib> and C<vendorarch> are the same, then they are only added to C<@INC> once. C<$Config{usedevel}> and the C-level C<PERL_USE_DEVEL> are now defined if perl is built with C<-Dusedevel>. F<Configure> will enable use of C<-fstack-protector>, to provide protection against stack-smashing attacks, if the compiler supports it. F<Configure> will now determine the correct prototypes for re-entrant functions, and for C<gconvert>, if you are using a C++ compiler rather than a C compiler. On Unix, if you build from a tree containing a git repository, the configuration process will note the commit hash you have checked out, for display in the output of C<perl -v> and C<perl -V>. Unpushed local commits are automatically added to the list of local patches displayed by C<perl -V>. =head2 Compilation improvements As part of the flattening of F<ext>, all extensions on all platforms are built by F<make_ext.pl>. This replaces the Unix-specific F<ext/util/make_ext>, VMS-specific F<make_ext.com> and Win32-specific F<win32/buildext.pl>. =head2 Platform Specific Changes =over 4 =item AIX Removed F<libbsd> for AIX 5L and 6.1. Only flock() was used from F<libbsd>. Removed F<libgdbm> for AIX 5L and 6.1. The F<libgdbm> is delivered as an optional package with the AIX Toolbox. Unfortunately the 64 bit version is broken. Hints changes mean that AIX 4.2 should work again. =item Cygwin On Cygwin we now strip the last number from the DLL. This has been the behaviour in the cygwin.com build for years. The hints files have been updated. =item FreeBSD The hints files now identify the correct threading libraries on FreeBSD 7 and later. =item Irix We now work around a bizarre preprocessor bug in the Irix 6.5 compiler: C<cc -E -> unfortunately goes into K&R mode, but C<cc -E file.c> doesn't. =item Haiku Patches from the Haiku maintainers have been merged in. Perl should now build on Haiku. =item MirOS BSD Perl should now build on MirOS BSD. =item NetBSD Hints now supports versions 5.*. =item Stratus VOS Various changes from Stratus have been merged in. =item Symbian There is now support for Symbian S60 3.2 SDK and S60 5.0 SDK. =item Win32 Improved message window handling means that C<alarm> and C<kill> messages will no longer be dropped under race conditions. =item VMS Reads from the in-memory temporary files of C<PerlIO::scalar> used to fail if C<$/> was set to a numeric reference (to indicate record-style reads). This is now fixed. VMS now supports C<getgrgid>. Many improvements and cleanups have been made to the VMS file name handling and conversion code. Enabling the C<PERL_VMS_POSIX_EXIT> logical name now encodes a POSIX exit status in a VMS condition value for better interaction with GNV's bash shell and other utilities that depend on POSIX exit values. See L<perlvms/"$?"> for details. =back =head1 Selected Bug Fixes =over 4 =item * 5.10.0 inadvertently disabled an optimisation, which caused a measurable performance drop in list assignment, such as is often used to assign function parameters from C<@_>. The optimisation has been re-instated, and the performance regression fixed. =item * Fixed memory leak on C<while (1) { map 1, 1 }> [RT #53038]. =item * Some potential coredumps in PerlIO fixed [RT #57322,54828]. =item * The debugger now works with lvalue subroutines. =item * The debugger's C<m> command was broken on modules that defined constants [RT #61222]. =item * C<crypt()> and string complement could return tainted values for untainted arguments [RT #59998]. =item * The C<-i.suffix> command-line switch now recreates the file using restricted permissions, before changing its mode to match the original file. This eliminates a potential race condition [RT #60904]. =item * On some Unix systems, the value in C<$?> would not have the top bit set (C<$? & 128>) even if the child core dumped. =item * Under some circumstances, $^R could incorrectly become undefined [RT #57042]. =item * (XS) In various hash functions, passing a pre-computed hash to when the key is UTF-8 might result in an incorrect lookup. =item * (XS) Including F<XSUB.h> before F<perl.h> gave a compile-time error [RT #57176]. =item * C<< $object->isa('Foo') >> would report false if the package C<Foo> didn't exist, even if the object's C<@ISA> contained C<Foo>. =item * Various bugs in the new-to 5.10.0 mro code, triggered by manipulating C<@ISA>, have been found and fixed. =item * Bitwise operations on references could crash the interpreter, e.g. C<$x=\$y; $x |= "foo"> [RT #54956]. =item * Patterns including alternation might be sensitive to the internal UTF-8 representation, e.g. my $byte = chr(192); my $utf8 = chr(192); utf8::upgrade($utf8); $utf8 =~ /$byte|X}/i; # failed in 5.10.0 =item * Within UTF8-encoded Perl source files (i.e. where C<use utf8> is in effect), double-quoted literal strings could be corrupted where a C<\xNN>, C<\0NNN> or C<\N{}> is followed by a literal character with ordinal value greater than 255 [RT #59908]. =item * C<B::Deparse> failed to correctly deparse various constructs: C<readpipe STRING> [RT #62428], C<CORE::require(STRING)> [RT #62488], C<sub foo(_)> [RT #62484]. =item * Using C<setpgrp()> with no arguments could corrupt the perl stack. =item * The block form of C<eval> is now specifically trappable by C<Safe> and C<ops>. Previously it was erroneously treated like string C<eval>. =item * In 5.10.0, the two characters C<[~> were sometimes parsed as the smart match operator (C<~~>) [RT #63854]. =item * In 5.10.0, the C<*> quantifier in patterns was sometimes treated as C<{0,32767}> [RT #60034, #60464]. For example, this match would fail: ("ab" x 32768) =~ /^(ab)*$/ =item * C<shmget> was limited to a 32 bit segment size on a 64 bit OS [RT #63924]. =item * Using C<next> or C<last> to exit a C<given> block no longer produces a spurious warning like the following: Exiting given via last at foo.pl line 123 =item * On Windows, C<'.\foo'> and C<'..\foo'> were treated differently than C<'./foo'> and C<'../foo'> by C<do> and C<require> [RT #63492]. =item * Assigning a format to a glob could corrupt the format; e.g.: *bar=*foo{FORMAT}; # foo format now bad =item * Attempting to coerce a typeglob to a string or number could cause an assertion failure. The correct error message is now generated, C<Can't coerce GLOB to I<$type>>. =item * Under C<use filetest 'access'>, C<-x> was using the wrong access mode. This has been fixed [RT #49003]. =item * C<length> on a tied scalar that returned a Unicode value would not be correct the first time. This has been fixed. =item * Using an array C<tie> inside in array C<tie> could SEGV. This has been fixed. [RT #51636] =item * A race condition inside C<PerlIOStdio_close()> has been identified and fixed. This used to cause various threading issues, including SEGVs. =item * In C<unpack>, the use of C<()> groups in scalar context was internally placing a list on the interpreter's stack, which manifested in various ways, including SEGVs. This is now fixed [RT #50256]. =item * Magic was called twice in C<substr>, C<\&$x>, C<tie $x, $m> and C<chop>. These have all been fixed. =item * A 5.10.0 optimisation to clear the temporary stack within the implicit loop of C<s///ge> has been reverted, as it turned out to be the cause of obscure bugs in seemingly unrelated parts of the interpreter [commit ef0d4e17921ee3de]. =item * The line numbers for warnings inside C<elsif> are now correct. =item * The C<..> operator now works correctly with ranges whose ends are at or close to the values of the smallest and largest integers. =item * C<binmode STDIN, ':raw'> could lead to segmentation faults on some platforms. This has been fixed [RT #54828]. =item * An off-by-one error meant that C<index $str, ...> was effectively being executed as C<index "$str\0", ...>. This has been fixed [RT #53746]. =item * Various leaks associated with named captures in regexes have been fixed [RT #57024]. =item * A weak reference to a hash would leak. This was affecting C<DBI> [RT #56908]. =item * Using (?|) in a regex could cause a segfault [RT #59734]. =item * Use of a UTF-8 C<tr//> within a closure could cause a segfault [RT #61520]. =item * Calling C<sv_chop()> or otherwise upgrading an SV could result in an unaligned 64-bit access on the SPARC architecture [RT #60574]. =item * In the 5.10.0 release, C<inc_version_list> would incorrectly list C<5.10.*> after C<5.8.*>; this affected the C<@INC> search order [RT #67628]. =item * In 5.10.0, C<pack "a*", $tainted_value> returned a non-tainted value [RT #52552]. =item * In 5.10.0, C<printf> and C<sprintf> could produce the fatal error C<panic: utf8_mg_pos_cache_update> when printing UTF-8 strings [RT #62666]. =item * In the 5.10.0 release, a dynamically created C<AUTOLOAD> method might be missed (method cache issue) [RT #60220,60232]. =item * In the 5.10.0 release, a combination of C<use feature> and C<//ee> could cause a memory leak [RT #63110]. =item * C<-C> on the shebang (C<#!>) line is once more permitted if it is also specified on the command line. C<-C> on the shebang line used to be a silent no-op I<if> it was not also on the command line, so perl 5.10.0 disallowed it, which broke some scripts. Now perl checks whether it is also on the command line and only dies if it is not [RT #67880]. =item * In 5.10.0, certain types of re-entrant regular expression could crash, or cause the following assertion failure [RT #60508]: Assertion rx->sublen >= (s - rx->subbeg) + i failed =back =head1 New or Changed Diagnostics =over 4 =item C<panic: sv_chop %s> This new fatal error occurs when the C routine C<Perl_sv_chop()> was passed a position that is not within the scalar's string buffer. This could be caused by buggy XS code, and at this point recovery is not possible. =item C<Can't locate package %s for the parents of %s> This warning has been removed. In general, it only got produced in conjunction with other warnings, and removing it allowed an ISA lookup optimisation to be added. =item C<v-string in use/require is non-portable> This warning has been removed. =item C<Deep recursion on subroutine "%s"> It is now possible to change the depth threshold for this warning from the default of 100, by recompiling the F<perl> binary, setting the C pre-processor macro C<PERL_SUB_DEPTH_WARN> to the desired value. =back =head1 Changed Internals =over 4 =item * The J.R.R. Tolkien quotes at the head of C source file have been checked and proper citations added, thanks to a patch from Tom Christiansen. =item * C<vcroak()> now accepts a null first argument. In addition, a full audit was made of the "not NULL" compiler annotations, and those for several other internal functions were corrected. =item * New macros C<dSAVEDERRNO>, C<dSAVE_ERRNO>, C<SAVE_ERRNO>, C<RESTORE_ERRNO> have been added to formalise the temporary saving of the C<errno> variable. =item * The function C<Perl_sv_insert_flags> has been added to augment C<Perl_sv_insert>. =item * The function C<Perl_newSV_type(type)> has been added, equivalent to C<Perl_newSV()> followed by C<Perl_sv_upgrade(type)>. =item * The function C<Perl_newSVpvn_flags()> has been added, equivalent to C<Perl_newSVpvn()> and then performing the action relevant to the flag. Two flag bits are currently supported. =over 4 =item C<SVf_UTF8> This will call C<SvUTF8_on()> for you. (Note that this does not convert an sequence of ISO 8859-1 characters to UTF-8). A wrapper, C<newSVpvn_utf8()> is available for this. =item C<SVs_TEMP> Call C<sv_2mortal()> on the new SV. =back There is also a wrapper that takes constant strings, C<newSVpvs_flags()>. =item * The function C<Perl_croak_xs_usage> has been added as a wrapper to C<Perl_croak>. =item * The functions C<PerlIO_find_layer> and C<PerlIO_list_alloc> are now exported. =item * C<PL_na> has been exterminated from the core code, replaced by local STRLEN temporaries, or C<*_nolen()> calls. Either approach is faster than C<PL_na>, which is a pointer deference into the interpreter structure under ithreads, and a global variable otherwise. =item * C<Perl_mg_free()> used to leave freed memory accessible via SvMAGIC() on the scalar. It now updates the linked list to remove each piece of magic as it is freed. =item * Under ithreads, the regex in C<PL_reg_curpm> is now reference counted. This eliminates a lot of hackish workarounds to cope with it not being reference counted. =item * C<Perl_mg_magical()> would sometimes incorrectly turn on C<SvRMAGICAL()>. This has been fixed. =item * The I<public> IV and NV flags are now not set if the string value has trailing "garbage". This behaviour is consistent with not setting the public IV or NV flags if the value is out of range for the type. =item * SV allocation tracing has been added to the diagnostics enabled by C<-Dm>. The tracing can alternatively output via the C<PERL_MEM_LOG> mechanism, if that was enabled when the F<perl> binary was compiled. =item * Uses of C<Nullav>, C<Nullcv>, C<Nullhv>, C<Nullop>, C<Nullsv> etc have been replaced by C<NULL> in the core code, and non-dual-life modules, as C<NULL> is clearer to those unfamiliar with the core code. =item * A macro C<MUTABLE_PTR(p)> has been added, which on (non-pedantic) gcc will not cast away C<const>, returning a C<void *>. Macros C<MUTABLE_SV(av)>, C<MUTABLE_SV(cv)> etc build on this, casting to C<AV *> etc without casting away C<const>. This allows proper compile-time auditing of C<const> correctness in the core, and helped picked up some errors (now fixed). =item * Macros C<mPUSHs()> and C<mXPUSHs()> have been added, for pushing SVs on the stack and mortalizing them. =item * Use of the private structure C<mro_meta> has changed slightly. Nothing outside the core should be accessing this directly anyway. =item * A new tool, C<Porting/expand-macro.pl> has been added, that allows you to view how a C preprocessor macro would be expanded when compiled. This is handy when trying to decode the macro hell that is the perl guts. =back =head1 New Tests Many modules updated from CPAN incorporate new tests. Several tests that have the potential to hang forever if they fail now incorporate a "watchdog" functionality that will kill them after a timeout, which helps ensure that C<make test> and C<make test_harness> run to completion automatically. (Jerry Hedden). Some core-specific tests have been added: =over 4 =item t/comp/retainedlines.t Check that the debugger can retain source lines from C<eval>. =item t/io/perlio_fail.t Check that bad layers fail. =item t/io/perlio_leaks.t Check that PerlIO layers are not leaking. =item t/io/perlio_open.t Check that certain special forms of open work. =item t/io/perlio.t General PerlIO tests. =item t/io/pvbm.t Check that there is no unexpected interaction between the internal types C<PVBM> and C<PVGV>. =item t/mro/package_aliases.t Check that mro works properly in the presence of aliased packages. =item t/op/dbm.t Tests for C<dbmopen> and C<dbmclose>. =item t/op/index_thr.t Tests for the interaction of C<index> and threads. =item t/op/pat_thr.t Tests for the interaction of esoteric patterns and threads. =item t/op/qr_gc.t Test that C<qr> doesn't leak. =item t/op/reg_email_thr.t Tests for the interaction of regex recursion and threads. =item t/op/regexp_qr_embed_thr.t Tests for the interaction of patterns with embedded C<qr//> and threads. =item t/op/regexp_unicode_prop.t Tests for Unicode properties in regular expressions. =item t/op/regexp_unicode_prop_thr.t Tests for the interaction of Unicode properties and threads. =item t/op/reg_nc_tie.t Test the tied methods of C<Tie::Hash::NamedCapture>. =item t/op/reg_posixcc.t Check that POSIX character classes behave consistently. =item t/op/re.t Check that exportable C<re> functions in F<universal.c> work. =item t/op/setpgrpstack.t Check that C<setpgrp> works. =item t/op/substr_thr.t Tests for the interaction of C<substr> and threads. =item t/op/upgrade.t Check that upgrading and assigning scalars works. =item t/uni/lex_utf8.t Check that Unicode in the lexer works. =item t/uni/tie.t Check that Unicode and C<tie> work. =back =head1 Known Problems This is a list of some significant unfixed bugs, which are regressions from either 5.10.0 or 5.8.x. =over 4 =item * C<List::Util::first> misbehaves in the presence of a lexical C<$_> (typically introduced by C<my $_> or implicitly by C<given>). The variable which gets set for each iteration is the package variable C<$_>, not the lexical C<$_> [RT #67694]. A similar issue may occur in other modules that provide functions which take a block as their first argument, like foo { ... $_ ...} list =item * The C<charnames> pragma may generate a run-time error when a regex is interpolated [RT #56444]: use charnames ':full'; my $r1 = qr/\N{THAI CHARACTER SARA I}/; "foo" =~ $r1; # okay "foo" =~ /$r1+/; # runtime error A workaround is to generate the character outside of the regex: my $a = "\N{THAI CHARACTER SARA I}"; my $r1 = qr/$a/; =item * Some regexes may run much more slowly when run in a child thread compared with the thread the pattern was compiled into [RT #55600]. =back =head1 Deprecations The following items are now deprecated. =over 4 =item * C<Switch> is buggy and should be avoided. From perl 5.11.0 onwards, it is intended that any use of the core version of this module will emit a warning, and that the module will eventually be removed from the core (probably in perl 5.14.0). See L<perlsyn/"Switch statements"> for its replacement. =item * C<suidperl> will be removed in 5.12.0. This provides a mechanism to emulate setuid permission bits on systems that don't support it properly. =back =head1 Acknowledgements Some of the work in this release was funded by a TPF grant. Nicholas Clark officially retired from maintenance pumpking duty at the end of 2008; however in reality he has put much effort in since then to help get 5.10.1 into a fit state to be released, including writing a considerable chunk of this perldelta. Steffen Mueller and David Golden in particular helped getting CPAN modules polished and synchronised with their in-core equivalents. Craig Berry was tireless in getting maint to run under VMS, no matter how many times we broke it for him. The other core committers contributed most of the changes, and applied most of the patches sent in by the hundreds of contributors listed in F<AUTHORS>. (Sorry to all the people I haven't mentioned by name). Finally, thanks to Larry Wall, without whom none of this would be necessary. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications, which make it inappropriate to send to a publicly archived mailing list, then please send it to perl5-security-report@perl.org. This points to a closed subscription unarchived mailing list, which includes all the core committers, who will be able to help assess the impact of issues, figure out a resolution, and help co-ordinate the release of patches to mitigate or fix the problem across all platforms on which Perl is supported. Please only use this address for security issues in the Perl core, not for modules independently distributed on CPAN. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perltrap.pod 0000644 00000024577 15125556335 0007132 0 ustar 00 =head1 NAME perltrap - Perl traps for the unwary =head1 DESCRIPTION The biggest trap of all is forgetting to C<use warnings> or use the B<-w> switch; see L<warnings> and L<perlrun/-w>. The second biggest trap is not making your entire program runnable under C<use strict>. The third biggest trap is not reading the list of changes in this version of Perl; see L<perldelta>. =head2 Awk Traps Accustomed B<awk> users should take special note of the following: =over 4 =item * A Perl program executes only once, not once for each input line. You can do an implicit loop with C<-n> or C<-p>. =item * The English module, loaded via use English; allows you to refer to special variables (like C<$/>) with names (like $RS), as though they were in B<awk>; see L<perlvar> for details. =item * Semicolons are required after all simple statements in Perl (except at the end of a block). Newline is not a statement delimiter. =item * Curly brackets are required on C<if>s and C<while>s. =item * Variables begin with "$", "@" or "%" in Perl. =item * Arrays index from 0. Likewise string positions in substr() and index(). =item * You have to decide whether your array has numeric or string indices. =item * Hash values do not spring into existence upon mere reference. =item * You have to decide whether you want to use string or numeric comparisons. =item * Reading an input line does not split it for you. You get to split it to an array yourself. And the split() operator has different arguments than B<awk>'s. =item * The current input line is normally in $_, not $0. It generally does not have the newline stripped. ($0 is the name of the program executed.) See L<perlvar>. =item * $<I<digit>> does not refer to fields--it refers to substrings matched by the last match pattern. =item * The print() statement does not add field and record separators unless you set C<$,> and C<$\>. You can set $OFS and $ORS if you're using the English module. =item * You must open your files before you print to them. =item * The range operator is "..", not comma. The comma operator works as in C. =item * The match operator is "=~", not "~". ("~" is the one's complement operator, as in C.) =item * The exponentiation operator is "**", not "^". "^" is the XOR operator, as in C. (You know, one could get the feeling that B<awk> is basically incompatible with C.) =item * The concatenation operator is ".", not the null string. (Using the null string would render C</pat/ /pat/> unparsable, because the third slash would be interpreted as a division operator--the tokenizer is in fact slightly context sensitive for operators like "/", "?", and ">". And in fact, "." itself can be the beginning of a number.) =item * The C<next>, C<exit>, and C<continue> keywords work differently. =item * The following variables work differently: Awk Perl ARGC scalar @ARGV (compare with $#ARGV) ARGV[0] $0 FILENAME $ARGV FNR $. - something FS (whatever you like) NF $#Fld, or some such NR $. OFMT $# OFS $, ORS $\ RLENGTH length($&) RS $/ RSTART length($`) SUBSEP $; =item * You cannot set $RS to a pattern, only a string. =item * When in doubt, run the B<awk> construct through B<a2p> and see what it gives you. =back =head2 C/C++ Traps Cerebral C and C++ programmers should take note of the following: =over 4 =item * Curly brackets are required on C<if>'s and C<while>'s. =item * You must use C<elsif> rather than C<else if>. =item * The C<break> and C<continue> keywords from C become in Perl C<last> and C<next>, respectively. Unlike in C, these do I<not> work within a C<do { } while> construct. See L<perlsyn/"Loop Control">. =item * The switch statement is called C<given>/C<when> and only available in perl 5.10 or newer. See L<perlsyn/"Switch Statements">. =item * Variables begin with "$", "@" or "%" in Perl. =item * Comments begin with "#", not "/*" or "//". Perl may interpret C/C++ comments as division operators, unterminated regular expressions or the defined-or operator. =item * You can't take the address of anything, although a similar operator in Perl is the backslash, which creates a reference. =item * C<ARGV> must be capitalized. C<$ARGV[0]> is C's C<argv[1]>, and C<argv[0]> ends up in C<$0>. =item * System calls such as link(), unlink(), rename(), etc. return nonzero for success, not 0. (system(), however, returns zero for success.) =item * Signal handlers deal with signal names, not numbers. Use C<kill -l> to find their names on your system. =back =head2 JavaScript Traps Judicious JavaScript programmers should take note of the following: =over 4 =item * In Perl, binary C<+> is always addition. C<$string1 + $string2> converts both strings to numbers and then adds them. To concatenate two strings, use the C<.> operator. =item * The C<+> unary operator doesn't do anything in Perl. It exists to avoid syntactic ambiguities. =item * Unlike C<for...in>, Perl's C<for> (also spelled C<foreach>) does not allow the left-hand side to be an arbitrary expression. It must be a variable: for my $variable (keys %hash) { ... } Furthermore, don't forget the C<keys> in there, as C<foreach my $kv (%hash) {}> iterates over the keys and values, and is generally not useful ($kv would be a key, then a value, and so on). =item * To iterate over the indices of an array, use C<foreach my $i (0 .. $#array) {}>. C<foreach my $v (@array) {}> iterates over the values. =item * Perl requires braces following C<if>, C<while>, C<foreach>, etc. =item * In Perl, C<else if> is spelled C<elsif>. =item * C<? :> has higher precedence than assignment. In JavaScript, one can write: condition ? do_something() : variable = 3 and the variable is only assigned if the condition is false. In Perl, you need parentheses: $condition ? do_something() : ($variable = 3); Or just use C<if>. =item * Perl requires semicolons to separate statements. =item * Variables declared with C<my> only affect code I<after> the declaration. You cannot write C<$x = 1; my $x;> and expect the first assignment to affect the same variable. It will instead assign to an C<$x> declared previously in an outer scope, or to a global variable. Note also that the variable is not visible until the following I<statement>. This means that in C<my $x = 1 + $x> the second $x refers to one declared previously. =item * C<my> variables are scoped to the current block, not to the current function. If you write C<{my $x;} $x;>, the second C<$x> does not refer to the one declared inside the block. =item * An object's members cannot be made accessible as variables. The closest Perl equivalent to C<with(object) { method() }> is C<for>, which can alias C<$_> to the object: for ($object) { $_->method; } =item * The object or class on which a method is called is passed as one of the method's arguments, not as a separate C<this> value. =back =head2 Sed Traps Seasoned B<sed> programmers should take note of the following: =over 4 =item * A Perl program executes only once, not once for each input line. You can do an implicit loop with C<-n> or C<-p>. =item * Backreferences in substitutions use "$" rather than "\". =item * The pattern matching metacharacters "(", ")", and "|" do not have backslashes in front. =item * The range operator is C<...>, rather than comma. =back =head2 Shell Traps Sharp shell programmers should take note of the following: =over 4 =item * The backtick operator does variable interpolation without regard to the presence of single quotes in the command. =item * The backtick operator does no translation of the return value, unlike B<csh>. =item * Shells (especially B<csh>) do several levels of substitution on each command line. Perl does substitution in only certain constructs such as double quotes, backticks, angle brackets, and search patterns. =item * Shells interpret scripts a little bit at a time. Perl compiles the entire program before executing it (except for C<BEGIN> blocks, which execute at compile time). =item * The arguments are available via @ARGV, not $1, $2, etc. =item * The environment is not automatically made available as separate scalar variables. =item * The shell's C<test> uses "=", "!=", "<" etc for string comparisons and "-eq", "-ne", "-lt" etc for numeric comparisons. This is the reverse of Perl, which uses C<eq>, C<ne>, C<lt> for string comparisons, and C<==>, C<!=> C<< < >> etc for numeric comparisons. =back =head2 Perl Traps Practicing Perl Programmers should take note of the following: =over 4 =item * Remember that many operations behave differently in a list context than they do in a scalar one. See L<perldata> for details. =item * Avoid barewords if you can, especially all lowercase ones. You can't tell by just looking at it whether a bareword is a function or a string. By using quotes on strings and parentheses on function calls, you won't ever get them confused. =item * You cannot discern from mere inspection which builtins are unary operators (like chop() and chdir()) and which are list operators (like print() and unlink()). (Unless prototyped, user-defined subroutines can B<only> be list operators, never unary ones.) See L<perlop> and L<perlsub>. =item * People have a hard time remembering that some functions default to $_, or @ARGV, or whatever, but that others which you might expect to do not. =item * The <FH> construct is not the name of the filehandle, it is a readline operation on that handle. The data read is assigned to $_ only if the file read is the sole condition in a while loop: while (<FH>) { } while (defined($_ = <FH>)) { }.. <FH>; # data discarded! =item * Remember not to use C<=> when you need C<=~>; these two constructs are quite different: $x = /foo/; $x =~ /foo/; =item * The C<do {}> construct isn't a real loop that you can use loop control on. =item * Use C<my()> for local variables whenever you can get away with it (but see L<perlform> for where you can't). Using C<local()> actually gives a local value to a global variable, which leaves you open to unforeseen side-effects of dynamic scoping. =item * If you localize an exported variable in a module, its exported value will not change. The local name becomes an alias to a new value but the external name is still an alias for the original. =back As always, if any of these are ever officially declared as bugs, they'll be fixed and removed. perlcommunity.pod 0000644 00000015507 15125556335 0010201 0 ustar 00 =head1 NAME perlcommunity - a brief overview of the Perl community =head1 DESCRIPTION This document aims to provide an overview of the vast perl community, which is far too large and diverse to provide a detailed listing. If any specific niche has been forgotten, it is not meant as an insult but an omission for the sake of brevity. The Perl community is as diverse as Perl, and there is a large amount of evidence that the Perl users apply TMTOWTDI to all endeavors, not just programming. From websites, to IRC, to mailing lists, there is more than one way to get involved in the community. =head2 Where to Find the Community There is a central directory for the Perl community: L<https://perl.org> maintained by the Perl Foundation (L<https://www.perlfoundation.org/>), which tracks and provides services for a variety of other community sites. =head2 Mailing Lists and Newsgroups Perl runs on e-mail; there is no doubt about it. The Camel book was originally written mostly over e-mail and today Perl's development is co-ordinated through mailing lists. The largest repository of Perl mailing lists is located at L<https://lists.perl.org>. Most Perl-related projects set up mailing lists for both users and contributors. If you don't see a certain project listed at L<https://lists.perl.org>, check the particular website for that project. Most mailing lists are archived at L<https://www.nntp.perl.org/>. =head2 IRC The Perl community has a rather large IRC presence. For starters, it has its own IRC network, L<irc://irc.perl.org>. General (not help-oriented) chat can be found at L<irc://irc.perl.org/#perl>. Many other more specific chats are also hosted on the network. Information about irc.perl.org is located on the network's website: L<https://www.irc.perl.org>. For a more help-oriented #perl, check out L<irc://irc.freenode.net/#perl>. Raku development also has a presence in L<irc://irc.freenode.net/#raku-dev>. Most Perl-related channels will be kind enough to point you in the right direction if you ask nicely. Any large IRC network (Dalnet, EFnet) is also likely to have a #perl channel, with varying activity levels. =head2 Websites Perl websites come in a variety of forms, but they fit into two large categories: forums and news websites. There are many Perl-related websites, so only a few of the community's largest are mentioned here. =head3 News sites =over 4 =item L<https://perl.com/> Originally run by O'Reilly Media (the publisher of L<the Camel Book|perlbook>, this site provides quality articles mostly about technical details of Perl. =item L<http://blogs.perl.org/> Many members of the community have a Perl-related blog on this site. If you'd like to join them, you can sign up for free. =item L<http://perlsphere.net/> Perlsphere is one of several aggregators of Perl-related blog feeds. =item L<http://perlweekly.com/> Perl Weekly is a weekly mailing list that keeps you up to date on conferences, releases and notable blog posts. =back =head3 Forums =over 4 =item L<https://www.perlmonks.org/> PerlMonks is one of the largest Perl forums, and describes itself as "A place for individuals to polish, improve, and showcase their Perl skills." and "A community which allows everyone to grow and learn from each other." =item L<https://stackoverflow.com/> Stack Overflow is a free question-and-answer site for programmers. It's not focussed solely on Perl, but it does have an active group of users who do their best to help people with their Perl programming questions. =item L<http://prepan.org/> PrePAN is used as a place to discuss modules that you're considering uploading to the CPAN. You can get feedback on their design before you upload. =back =head2 User Groups Many cities around the world have local Perl Mongers chapters. A Perl Mongers chapter is a local user group which typically holds regular in-person meetings, both social and technical; helps organize local conferences, workshops, and hackathons; and provides a mailing list or other continual contact method for its members to keep in touch. To find your local Perl Mongers (or PM as they're commonly abbreviated) group check the international Perl Mongers directory at L<https://www.pm.org/>. =head2 Workshops Perl workshops are, as the name might suggest, workshops where Perl is taught in a variety of ways. At the workshops, subjects range from a beginner's introduction (such as the Pittsburgh Perl Workshop's "Zero To Perl") to much more advanced subjects. There are several great resources for locating workshops: the L<websites|"Websites"> mentioned above, the L<calendar|"Calendar of Perl Events"> mentioned below, and the YAPC Europe website, L<http://www.yapceurope.org/>, which is probably the best resource for European Perl events. =head2 Hackathons Hackathons are a very different kind of gathering where Perl hackers gather to do just that, hack nonstop for an extended (several day) period on a specific project or projects. Information about hackathons can be located in the same place as information about L<workshops|"Workshops"> as well as in L<irc://irc.perl.org/#perl>. If you have never been to a hackathon, here are a few basic things you need to know before attending: have a working laptop and know how to use it; check out the involved projects beforehand; have the necessary version control client; and bring backup equipment (an extra LAN cable, additional power strips, etc.) because someone will forget. =head2 Conventions Perl had two major annual conventions: The Perl Conference (now part of OSCON), put on by O'Reilly, and Yet Another Perl Conference or YAPC (pronounced yap-see), which is localized into several regional YAPCs (North America, Europe, Asia) in a stunning grassroots display by the Perl community. In 2016, YAPC was rebranded as The Perl Conference again. It is now referred to as The Perl and Raku Conference. OSCON had been discontinued. For more information about either conference, check out their respective web pages: =over 4 =item * The Perl Conference L<http://perlconference.us/>. =item * OSCON L<https://www.oreilly.com/conferences/> =back An additional conference franchise with a large Perl portion was the Open Source Developers Conference or OSDC. First held in Australia, it also spread to Israel and France. More information can be found at: L<http://www.osdc.org.il> for Israel, and L<http://www.osdc.fr/> for France. =head2 Calendar of Perl Events The Perl Review, L<http://www.theperlreview.com> maintains a website and Google calendar for tracking workshops, hackathons, Perl Mongers meetings, and other events. A view of this calendar is available at L<https://www.perl.org/events.html>. Not every event or Perl Mongers group is on that calendar, so don't lose heart if you don't see yours posted. To have your event or group listed, contact brian d foy (brian@theperlreview.com). =head1 AUTHOR Edgar "Trizor" Bering <trizor@gmail.com> =cut perldtrace.pod 0000644 00000017427 15125556335 0007422 0 ustar 00 =head1 NAME perldtrace - Perl's support for DTrace =head1 SYNOPSIS # dtrace -Zn 'perl::sub-entry, perl::sub-return { trace(copyinstr(arg0)) }' dtrace: description 'perl::sub-entry, perl::sub-return ' matched 10 probes # perl -E 'sub outer { inner(@_) } sub inner { say shift } outer("hello")' hello (dtrace output) CPU ID FUNCTION:NAME 0 75915 Perl_pp_entersub:sub-entry BEGIN 0 75915 Perl_pp_entersub:sub-entry import 0 75922 Perl_pp_leavesub:sub-return import 0 75922 Perl_pp_leavesub:sub-return BEGIN 0 75915 Perl_pp_entersub:sub-entry outer 0 75915 Perl_pp_entersub:sub-entry inner 0 75922 Perl_pp_leavesub:sub-return inner 0 75922 Perl_pp_leavesub:sub-return outer =head1 DESCRIPTION DTrace is a framework for comprehensive system- and application-level tracing. Perl is a DTrace I<provider>, meaning it exposes several I<probes> for instrumentation. You can use these in conjunction with kernel-level probes, as well as probes from other providers such as MySQL, in order to diagnose software defects, or even just your application's bottlenecks. Perl must be compiled with the C<-Dusedtrace> option in order to make use of the provided probes. While DTrace aims to have no overhead when its instrumentation is not active, Perl's support itself cannot uphold that guarantee, so it is built without DTrace probes under most systems. One notable exception is that Mac OS X ships a F</usr/bin/perl> with DTrace support enabled. =head1 HISTORY =over 4 =item 5.10.1 Perl's initial DTrace support was added, providing C<sub-entry> and C<sub-return> probes. =item 5.14.0 The C<sub-entry> and C<sub-return> probes gain a fourth argument: the package name of the function. =item 5.16.0 The C<phase-change> probe was added. =item 5.18.0 The C<op-entry>, C<loading-file>, and C<loaded-file> probes were added. =back =head1 PROBES =over 4 =item sub-entry(SUBNAME, FILE, LINE, PACKAGE) Traces the entry of any subroutine. Note that all of the variables refer to the subroutine that is being invoked; there is currently no way to get ahold of any information about the subroutine's I<caller> from a DTrace action. :*perl*::sub-entry { printf("%s::%s entered at %s line %d\n", copyinstr(arg3), copyinstr(arg0), copyinstr(arg1), arg2); } =item sub-return(SUBNAME, FILE, LINE, PACKAGE) Traces the exit of any subroutine. Note that all of the variables refer to the subroutine that is returning; there is currently no way to get ahold of any information about the subroutine's I<caller> from a DTrace action. :*perl*::sub-return { printf("%s::%s returned at %s line %d\n", copyinstr(arg3), copyinstr(arg0), copyinstr(arg1), arg2); } =item phase-change(NEWPHASE, OLDPHASE) Traces changes to Perl's interpreter state. You can internalize this as tracing changes to Perl's C<${^GLOBAL_PHASE}> variable, especially since the values for C<NEWPHASE> and C<OLDPHASE> are the strings that C<${^GLOBAL_PHASE}> reports. :*perl*::phase-change { printf("Phase changed from %s to %s\n", copyinstr(arg1), copyinstr(arg0)); } =item op-entry(OPNAME) Traces the execution of each opcode in the Perl runloop. This probe is fired before the opcode is executed. When the Perl debugger is enabled, the DTrace probe is fired I<after> the debugger hooks (but still before the opcode itself is executed). :*perl*::op-entry { printf("About to execute opcode %s\n", copyinstr(arg0)); } =item loading-file(FILENAME) Fires when Perl is about to load an individual file, whether from C<use>, C<require>, or C<do>. This probe fires before the file is read from disk. The filename argument is converted to local filesystem paths instead of providing C<Module::Name>-style names. :*perl*:loading-file { printf("About to load %s\n", copyinstr(arg0)); } =item loaded-file(FILENAME) Fires when Perl has successfully loaded an individual file, whether from C<use>, C<require>, or C<do>. This probe fires after the file is read from disk and its contents evaluated. The filename argument is converted to local filesystem paths instead of providing C<Module::Name>-style names. :*perl*:loaded-file { printf("Successfully loaded %s\n", copyinstr(arg0)); } =back =head1 EXAMPLES =over 4 =item Most frequently called functions # dtrace -qZn 'sub-entry { @[strjoin(strjoin(copyinstr(arg3),"::"),copyinstr(arg0))] = count() } END {trunc(@, 10)}' Class::MOP::Attribute::slots 400 Try::Tiny::catch 411 Try::Tiny::try 411 Class::MOP::Instance::inline_slot_access 451 Class::MOP::Class::Immutable::Trait:::around 472 Class::MOP::Mixin::AttributeCore::has_initializer 496 Class::MOP::Method::Wrapped::__ANON__ 544 Class::MOP::Package::_package_stash 737 Class::MOP::Class::initialize 1128 Class::MOP::get_metaclass_by_name 1204 =item Trace function calls # dtrace -qFZn 'sub-entry, sub-return { trace(copyinstr(arg0)) }' 0 -> Perl_pp_entersub BEGIN 0 <- Perl_pp_leavesub BEGIN 0 -> Perl_pp_entersub BEGIN 0 -> Perl_pp_entersub import 0 <- Perl_pp_leavesub import 0 <- Perl_pp_leavesub BEGIN 0 -> Perl_pp_entersub BEGIN 0 -> Perl_pp_entersub dress 0 <- Perl_pp_leavesub dress 0 -> Perl_pp_entersub dirty 0 <- Perl_pp_leavesub dirty 0 -> Perl_pp_entersub whiten 0 <- Perl_pp_leavesub whiten 0 <- Perl_dounwind BEGIN =item Function calls during interpreter cleanup # dtrace -Zn 'phase-change /copyinstr(arg0) == "END"/ { self->ending = 1 } sub-entry /self->ending/ { trace(copyinstr(arg0)) }' CPU ID FUNCTION:NAME 1 77214 Perl_pp_entersub:sub-entry END 1 77214 Perl_pp_entersub:sub-entry END 1 77214 Perl_pp_entersub:sub-entry cleanup 1 77214 Perl_pp_entersub:sub-entry _force_writable 1 77214 Perl_pp_entersub:sub-entry _force_writable =item System calls at compile time # dtrace -qZn 'phase-change /copyinstr(arg0) == "START"/ { self->interesting = 1 } phase-change /copyinstr(arg0) == "RUN"/ { self->interesting = 0 } syscall::: /self->interesting/ { @[probefunc] = count() } END { trunc(@, 3) }' lseek 310 read 374 stat64 1056 =item Perl functions that execute the most opcodes # dtrace -qZn 'sub-entry { self->fqn = strjoin(copyinstr(arg3), strjoin("::", copyinstr(arg0))) } op-entry /self->fqn != ""/ { @[self->fqn] = count() } END { trunc(@, 3) }' warnings::unimport 4589 Exporter::Heavy::_rebuild_cache 5039 Exporter::import 14578 =back =head1 REFERENCES =over 4 =item DTrace Dynamic Tracing Guide L<http://dtrace.org/guide/preface.html> =item DTrace: Dynamic Tracing in Oracle Solaris, Mac OS X and FreeBSD L<https://www.amazon.com/DTrace-Dynamic-Tracing-Solaris-FreeBSD/dp/0132091518/> =back =head1 SEE ALSO =over 4 =item L<Devel::DTrace::Provider> This CPAN module lets you create application-level DTrace probes written in Perl. =back =head1 AUTHORS Shawn M Moore C<sartak@gmail.com> =cut perlsec.pod 0000644 00000065721 15125556335 0006732 0 ustar 00 =head1 NAME perlsec - Perl security =head1 DESCRIPTION Perl is designed to make it easy to program securely even when running with extra privileges, like setuid or setgid programs. Unlike most command line shells, which are based on multiple substitution passes on each line of the script, Perl uses a more conventional evaluation scheme with fewer hidden snags. Additionally, because the language has more builtin functionality, it can rely less upon external (and possibly untrustworthy) programs to accomplish its purposes. =head1 SECURITY VULNERABILITY CONTACT INFORMATION If you believe you have found a security vulnerability in the Perl interpreter or modules maintained in the core Perl codebase, email the details to L<perl-security@perl.org|mailto:perl-security@perl.org>. This address is a closed membership mailing list monitored by the Perl security team. See L<perlsecpolicy> for additional information. =head1 SECURITY MECHANISMS AND CONCERNS =head2 Taint mode Perl automatically enables a set of special security checks, called I<taint mode>, when it detects its program running with differing real and effective user or group IDs. The setuid bit in Unix permissions is mode 04000, the setgid bit mode 02000; either or both may be set. You can also enable taint mode explicitly by using the B<-T> command line flag. This flag is I<strongly> suggested for server programs and any program run on behalf of someone else, such as a CGI script. Once taint mode is on, it's on for the remainder of your script. While in this mode, Perl takes special precautions called I<taint checks> to prevent both obvious and subtle traps. Some of these checks are reasonably simple, such as verifying that path directories aren't writable by others; careful programmers have always used checks like these. Other checks, however, are best supported by the language itself, and it is these checks especially that contribute to making a set-id Perl program more secure than the corresponding C program. You may not use data derived from outside your program to affect something else outside your program--at least, not by accident. All command line arguments, environment variables, locale information (see L<perllocale>), results of certain system calls (C<readdir()>, C<readlink()>, the variable of C<shmread()>, the messages returned by C<msgrcv()>, the password, gcos and shell fields returned by the C<getpwxxx()> calls), and all file input are marked as "tainted". Tainted data may not be used directly or indirectly in any command that invokes a sub-shell, nor in any command that modifies files, directories, or processes, B<with the following exceptions>: =over 4 =item * Arguments to C<print> and C<syswrite> are B<not> checked for taintedness. =item * Symbolic methods $obj->$method(@args); and symbolic sub references &{$foo}(@args); $foo->(@args); are not checked for taintedness. This requires extra carefulness unless you want external data to affect your control flow. Unless you carefully limit what these symbolic values are, people are able to call functions B<outside> your Perl code, such as POSIX::system, in which case they are able to run arbitrary external code. =item * Hash keys are B<never> tainted. =back For efficiency reasons, Perl takes a conservative view of whether data is tainted. If an expression contains tainted data, any subexpression may be considered tainted, even if the value of the subexpression is not itself affected by the tainted data. Because taintedness is associated with each scalar value, some elements of an array or hash can be tainted and others not. The keys of a hash are B<never> tainted. For example: $arg = shift; # $arg is tainted $hid = $arg . 'bar'; # $hid is also tainted $line = <>; # Tainted $line = <STDIN>; # Also tainted open FOO, "/home/me/bar" or die $!; $line = <FOO>; # Still tainted $path = $ENV{'PATH'}; # Tainted, but see below $data = 'abc'; # Not tainted system "echo $arg"; # Insecure system "/bin/echo", $arg; # Considered insecure # (Perl doesn't know about /bin/echo) system "echo $hid"; # Insecure system "echo $data"; # Insecure until PATH set $path = $ENV{'PATH'}; # $path now tainted $ENV{'PATH'} = '/bin:/usr/bin'; delete @ENV{'IFS', 'CDPATH', 'ENV', 'BASH_ENV'}; $path = $ENV{'PATH'}; # $path now NOT tainted system "echo $data"; # Is secure now! open(FOO, "< $arg"); # OK - read-only file open(FOO, "> $arg"); # Not OK - trying to write open(FOO,"echo $arg|"); # Not OK open(FOO,"-|") or exec 'echo', $arg; # Also not OK $shout = `echo $arg`; # Insecure, $shout now tainted unlink $data, $arg; # Insecure umask $arg; # Insecure exec "echo $arg"; # Insecure exec "echo", $arg; # Insecure exec "sh", '-c', $arg; # Very insecure! @files = <*.c>; # insecure (uses readdir() or similar) @files = glob('*.c'); # insecure (uses readdir() or similar) # In either case, the results of glob are tainted, since the list of # filenames comes from outside of the program. $bad = ($arg, 23); # $bad will be tainted $arg, `true`; # Insecure (although it isn't really) If you try to do something insecure, you will get a fatal error saying something like "Insecure dependency" or "Insecure $ENV{PATH}". The exception to the principle of "one tainted value taints the whole expression" is with the ternary conditional operator C<?:>. Since code with a ternary conditional $result = $tainted_value ? "Untainted" : "Also untainted"; is effectively if ( $tainted_value ) { $result = "Untainted"; } else { $result = "Also untainted"; } it doesn't make sense for C<$result> to be tainted. =head2 Laundering and Detecting Tainted Data To test whether a variable contains tainted data, and whose use would thus trigger an "Insecure dependency" message, you can use the C<tainted()> function of the Scalar::Util module, available in your nearby CPAN mirror, and included in Perl starting from the release 5.8.0. Or you may be able to use the following C<is_tainted()> function. sub is_tainted { local $@; # Don't pollute caller's value. return ! eval { eval("#" . substr(join("", @_), 0, 0)); 1 }; } This function makes use of the fact that the presence of tainted data anywhere within an expression renders the entire expression tainted. It would be inefficient for every operator to test every argument for taintedness. Instead, the slightly more efficient and conservative approach is used that if any tainted value has been accessed within the same expression, the whole expression is considered tainted. But testing for taintedness gets you only so far. Sometimes you have just to clear your data's taintedness. Values may be untainted by using them as keys in a hash; otherwise the only way to bypass the tainting mechanism is by referencing subpatterns from a regular expression match. Perl presumes that if you reference a substring using $1, $2, etc. in a non-tainting pattern, that you knew what you were doing when you wrote that pattern. That means using a bit of thought--don't just blindly untaint anything, or you defeat the entire mechanism. It's better to verify that the variable has only good characters (for certain values of "good") rather than checking whether it has any bad characters. That's because it's far too easy to miss bad characters that you never thought of. Here's a test to make sure that the data contains nothing but "word" characters (alphabetics, numerics, and underscores), a hyphen, an at sign, or a dot. if ($data =~ /^([-\@\w.]+)$/) { $data = $1; # $data now untainted } else { die "Bad data in '$data'"; # log this somewhere } This is fairly secure because C</\w+/> doesn't normally match shell metacharacters, nor are dot, dash, or at going to mean something special to the shell. Use of C</.+/> would have been insecure in theory because it lets everything through, but Perl doesn't check for that. The lesson is that when untainting, you must be exceedingly careful with your patterns. Laundering data using regular expression is the I<only> mechanism for untainting dirty data, unless you use the strategy detailed below to fork a child of lesser privilege. The example does not untaint C<$data> if C<use locale> is in effect, because the characters matched by C<\w> are determined by the locale. Perl considers that locale definitions are untrustworthy because they contain data from outside the program. If you are writing a locale-aware program, and want to launder data with a regular expression containing C<\w>, put C<no locale> ahead of the expression in the same block. See L<perllocale/SECURITY> for further discussion and examples. =head2 Switches On the "#!" Line When you make a script executable, in order to make it usable as a command, the system will pass switches to perl from the script's #! line. Perl checks that any command line switches given to a setuid (or setgid) script actually match the ones set on the #! line. Some Unix and Unix-like environments impose a one-switch limit on the #! line, so you may need to use something like C<-wU> instead of C<-w -U> under such systems. (This issue should arise only in Unix or Unix-like environments that support #! and setuid or setgid scripts.) =head2 Taint mode and @INC When the taint mode (C<-T>) is in effect, the environment variables C<PERL5LIB> and C<PERLLIB> are ignored by Perl. You can still adjust C<@INC> from outside the program by using the C<-I> command line option as explained in L<perlrun|perlrun/-Idirectory>. The two environment variables are ignored because they are obscured, and a user running a program could be unaware that they are set, whereas the C<-I> option is clearly visible and therefore permitted. Another way to modify C<@INC> without modifying the program, is to use the C<lib> pragma, e.g.: perl -Mlib=/foo program The benefit of using C<-Mlib=/foo> over C<-I/foo>, is that the former will automagically remove any duplicated directories, while the latter will not. Note that if a tainted string is added to C<@INC>, the following problem will be reported: Insecure dependency in require while running with -T switch On versions of Perl before 5.26, activating taint mode will also remove the current directory (".") from the default value of C<@INC>. Since version 5.26, the current directory isn't included in C<@INC> by default. =head2 Cleaning Up Your Path For "Insecure C<$ENV{PATH}>" messages, you need to set C<$ENV{'PATH'}> to a known value, and each directory in the path must be absolute and non-writable by others than its owner and group. You may be surprised to get this message even if the pathname to your executable is fully qualified. This is I<not> generated because you didn't supply a full path to the program; instead, it's generated because you never set your PATH environment variable, or you didn't set it to something that was safe. Because Perl can't guarantee that the executable in question isn't itself going to turn around and execute some other program that is dependent on your PATH, it makes sure you set the PATH. The PATH isn't the only environment variable which can cause problems. Because some shells may use the variables IFS, CDPATH, ENV, and BASH_ENV, Perl checks that those are either empty or untainted when starting subprocesses. You may wish to add something like this to your setid and taint-checking scripts. delete @ENV{qw(IFS CDPATH ENV BASH_ENV)}; # Make %ENV safer It's also possible to get into trouble with other operations that don't care whether they use tainted values. Make judicious use of the file tests in dealing with any user-supplied filenames. When possible, do opens and such B<after> properly dropping any special user (or group!) privileges. Perl doesn't prevent you from opening tainted filenames for reading, so be careful what you print out. The tainting mechanism is intended to prevent stupid mistakes, not to remove the need for thought. Perl does not call the shell to expand wild cards when you pass C<system> and C<exec> explicit parameter lists instead of strings with possible shell wildcards in them. Unfortunately, the C<open>, C<glob>, and backtick functions provide no such alternate calling convention, so more subterfuge will be required. Perl provides a reasonably safe way to open a file or pipe from a setuid or setgid program: just create a child process with reduced privilege who does the dirty work for you. First, fork a child using the special C<open> syntax that connects the parent and child by a pipe. Now the child resets its ID set and any other per-process attributes, like environment variables, umasks, current working directories, back to the originals or known safe values. Then the child process, which no longer has any special permissions, does the C<open> or other system call. Finally, the child passes the data it managed to access back to the parent. Because the file or pipe was opened in the child while running under less privilege than the parent, it's not apt to be tricked into doing something it shouldn't. Here's a way to do backticks reasonably safely. Notice how the C<exec> is not called with a string that the shell could expand. This is by far the best way to call something that might be subjected to shell escapes: just never call the shell at all. use English; die "Can't fork: $!" unless defined($pid = open(KID, "-|")); if ($pid) { # parent while (<KID>) { # do something } close KID; } else { my @temp = ($EUID, $EGID); my $orig_uid = $UID; my $orig_gid = $GID; $EUID = $UID; $EGID = $GID; # Drop privileges $UID = $orig_uid; $GID = $orig_gid; # Make sure privs are really gone ($EUID, $EGID) = @temp; die "Can't drop privileges" unless $UID == $EUID && $GID eq $EGID; $ENV{PATH} = "/bin:/usr/bin"; # Minimal PATH. # Consider sanitizing the environment even more. exec 'myprog', 'arg1', 'arg2' or die "can't exec myprog: $!"; } A similar strategy would work for wildcard expansion via C<glob>, although you can use C<readdir> instead. Taint checking is most useful when although you trust yourself not to have written a program to give away the farm, you don't necessarily trust those who end up using it not to try to trick it into doing something bad. This is the kind of security checking that's useful for set-id programs and programs launched on someone else's behalf, like CGI programs. This is quite different, however, from not even trusting the writer of the code not to try to do something evil. That's the kind of trust needed when someone hands you a program you've never seen before and says, "Here, run this." For that kind of safety, you might want to check out the Safe module, included standard in the Perl distribution. This module allows the programmer to set up special compartments in which all system operations are trapped and namespace access is carefully controlled. Safe should not be considered bullet-proof, though: it will not prevent the foreign code to set up infinite loops, allocate gigabytes of memory, or even abusing perl bugs to make the host interpreter crash or behave in unpredictable ways. In any case it's better avoided completely if you're really concerned about security. =head2 Shebang Race Condition Beyond the obvious problems that stem from giving special privileges to systems as flexible as scripts, on many versions of Unix, set-id scripts are inherently insecure right from the start. The problem is a race condition in the kernel. Between the time the kernel opens the file to see which interpreter to run and when the (now-set-id) interpreter turns around and reopens the file to interpret it, the file in question may have changed, especially if you have symbolic links on your system. Some Unixes, especially more recent ones, are free of this inherent security bug. On such systems, when the kernel passes the name of the set-id script to open to the interpreter, rather than using a pathname subject to meddling, it instead passes I</dev/fd/3>. This is a special file already opened on the script, so that there can be no race condition for evil scripts to exploit. On these systems, Perl should be compiled with C<-DSETUID_SCRIPTS_ARE_SECURE_NOW>. The F<Configure> program that builds Perl tries to figure this out for itself, so you should never have to specify this yourself. Most modern releases of SysVr4 and BSD 4.4 use this approach to avoid the kernel race condition. If you don't have the safe version of set-id scripts, all is not lost. Sometimes this kernel "feature" can be disabled, so that the kernel either doesn't run set-id scripts with the set-id or doesn't run them at all. Either way avoids the exploitability of the race condition, but doesn't help in actually running scripts set-id. If the kernel set-id script feature isn't disabled, then any set-id script provides an exploitable vulnerability. Perl can't avoid being exploitable, but will point out vulnerable scripts where it can. If Perl detects that it is being applied to a set-id script then it will complain loudly that your set-id script is insecure, and won't run it. When Perl complains, you need to remove the set-id bit from the script to eliminate the vulnerability. Refusing to run the script doesn't in itself close the vulnerability; it is just Perl's way of encouraging you to do this. To actually run a script set-id, if you don't have the safe version of set-id scripts, you'll need to put a C wrapper around the script. A C wrapper is just a compiled program that does nothing except call your Perl program. Compiled programs are not subject to the kernel bug that plagues set-id scripts. Here's a simple wrapper, written in C: #include <unistd.h> #include <stdio.h> #include <string.h> #include <errno.h> #define REAL_PATH "/path/to/script" int main(int argc, char **argv) { execv(REAL_PATH, argv); fprintf(stderr, "%s: %s: %s\n", argv[0], REAL_PATH, strerror(errno)); return 127; } Compile this wrapper into a binary executable and then make I<it> rather than your script setuid or setgid. Note that this wrapper isn't doing anything to sanitise the execution environment other than ensuring that a safe path to the script is used. It only avoids the shebang race condition. It relies on Perl's own features, and on the script itself being careful, to make it safe enough to run the script set-id. =head2 Protecting Your Programs There are a number of ways to hide the source to your Perl programs, with varying levels of "security". First of all, however, you I<can't> take away read permission, because the source code has to be readable in order to be compiled and interpreted. (That doesn't mean that a CGI script's source is readable by people on the web, though.) So you have to leave the permissions at the socially friendly 0755 level. This lets people on your local system only see your source. Some people mistakenly regard this as a security problem. If your program does insecure things, and relies on people not knowing how to exploit those insecurities, it is not secure. It is often possible for someone to determine the insecure things and exploit them without viewing the source. Security through obscurity, the name for hiding your bugs instead of fixing them, is little security indeed. You can try using encryption via source filters (Filter::* from CPAN, or Filter::Util::Call and Filter::Simple since Perl 5.8). But crackers might be able to decrypt it. You can try using the byte code compiler and interpreter described below, but crackers might be able to de-compile it. You can try using the native-code compiler described below, but crackers might be able to disassemble it. These pose varying degrees of difficulty to people wanting to get at your code, but none can definitively conceal it (this is true of every language, not just Perl). If you're concerned about people profiting from your code, then the bottom line is that nothing but a restrictive license will give you legal security. License your software and pepper it with threatening statements like "This is unpublished proprietary software of XYZ Corp. Your access to it does not give you permission to use it blah blah blah." You should see a lawyer to be sure your license's wording will stand up in court. =head2 Unicode Unicode is a new and complex technology and one may easily overlook certain security pitfalls. See L<perluniintro> for an overview and L<perlunicode> for details, and L<perlunicode/"Security Implications of Unicode"> for security implications in particular. =head2 Algorithmic Complexity Attacks Certain internal algorithms used in the implementation of Perl can be attacked by choosing the input carefully to consume large amounts of either time or space or both. This can lead into the so-called I<Denial of Service> (DoS) attacks. =over 4 =item * Hash Algorithm - Hash algorithms like the one used in Perl are well known to be vulnerable to collision attacks on their hash function. Such attacks involve constructing a set of keys which collide into the same bucket producing inefficient behavior. Such attacks often depend on discovering the seed of the hash function used to map the keys to buckets. That seed is then used to brute-force a key set which can be used to mount a denial of service attack. In Perl 5.8.1 changes were introduced to harden Perl to such attacks, and then later in Perl 5.18.0 these features were enhanced and additional protections added. At the time of this writing, Perl 5.18.0 is considered to be well-hardened against algorithmic complexity attacks on its hash implementation. This is largely owed to the following measures mitigate attacks: =over 4 =item Hash Seed Randomization In order to make it impossible to know what seed to generate an attack key set for, this seed is randomly initialized at process start. This may be overridden by using the PERL_HASH_SEED environment variable, see L<perlrun/PERL_HASH_SEED>. This environment variable controls how items are actually stored, not how they are presented via C<keys>, C<values> and C<each>. =item Hash Traversal Randomization Independent of which seed is used in the hash function, C<keys>, C<values>, and C<each> return items in a per-hash randomized order. Modifying a hash by insertion will change the iteration order of that hash. This behavior can be overridden by using C<hash_traversal_mask()> from L<Hash::Util> or by using the PERL_PERTURB_KEYS environment variable, see L<perlrun/PERL_PERTURB_KEYS>. Note that this feature controls the "visible" order of the keys, and not the actual order they are stored in. =item Bucket Order Perturbance When items collide into a given hash bucket the order they are stored in the chain is no longer predictable in Perl 5.18. This has the intention to make it harder to observe a collision. This behavior can be overridden by using the PERL_PERTURB_KEYS environment variable, see L<perlrun/PERL_PERTURB_KEYS>. =item New Default Hash Function The default hash function has been modified with the intention of making it harder to infer the hash seed. =item Alternative Hash Functions The source code includes multiple hash algorithms to choose from. While we believe that the default perl hash is robust to attack, we have included the hash function Siphash as a fall-back option. At the time of release of Perl 5.18.0 Siphash is believed to be of cryptographic strength. This is not the default as it is much slower than the default hash. =back Without compiling a special Perl, there is no way to get the exact same behavior of any versions prior to Perl 5.18.0. The closest one can get is by setting PERL_PERTURB_KEYS to 0 and setting the PERL_HASH_SEED to a known value. We do not advise those settings for production use due to the above security considerations. B<Perl has never guaranteed any ordering of the hash keys>, and the ordering has already changed several times during the lifetime of Perl 5. Also, the ordering of hash keys has always been, and continues to be, affected by the insertion order and the history of changes made to the hash over its lifetime. Also note that while the order of the hash elements might be randomized, this "pseudo-ordering" should B<not> be used for applications like shuffling a list randomly (use C<List::Util::shuffle()> for that, see L<List::Util>, a standard core module since Perl 5.8.0; or the CPAN module C<Algorithm::Numerical::Shuffle>), or for generating permutations (use e.g. the CPAN modules C<Algorithm::Permute> or C<Algorithm::FastPermute>), or for any cryptographic applications. Tied hashes may have their own ordering and algorithmic complexity attacks. =item * Regular expressions - Perl's regular expression engine is so called NFA (Non-deterministic Finite Automaton), which among other things means that it can rather easily consume large amounts of both time and space if the regular expression may match in several ways. Careful crafting of the regular expressions can help but quite often there really isn't much one can do (the book "Mastering Regular Expressions" is required reading, see L<perlfaq2>). Running out of space manifests itself by Perl running out of memory. =item * Sorting - the quicksort algorithm used in Perls before 5.8.0 to implement the sort() function was very easy to trick into misbehaving so that it consumes a lot of time. Starting from Perl 5.8.0 a different sorting algorithm, mergesort, is used by default. Mergesort cannot misbehave on any input. =back See L<https://www.usenix.org/legacy/events/sec03/tech/full_papers/crosby/crosby.pdf> for more information, and any computer science textbook on algorithmic complexity. =head2 Using Sudo The popular tool C<sudo> provides a controlled way for users to be able to run programs as other users. It sanitises the execution environment to some extent, and will avoid the L<shebang race condition|/"Shebang Race Condition">. If you don't have the safe version of set-id scripts, then C<sudo> may be a more convenient way of executing a script as another user than writing a C wrapper would be. However, C<sudo> sets the real user or group ID to that of the target identity, not just the effective ID as set-id bits do. As a result, Perl can't detect that it is running under C<sudo>, and so won't automatically take its own security precautions such as turning on taint mode. Where C<sudo> configuration dictates exactly which command can be run, the approved command may include a C<-T> option to perl to enable taint mode. In general, it is necessary to evaluate the suitaility of a script to run under C<sudo> specifically with that kind of execution environment in mind. It is neither necessary nor sufficient for the same script to be suitable to run in a traditional set-id arrangement, though many of the issues overlap. =head1 SEE ALSO L<perlrun/ENVIRONMENT> for its description of cleaning up environment variables. perl5240delta.pod 0000644 00000176633 15125556335 0007571 0 ustar 00 =encoding utf8 =head1 NAME perl5240delta - what is new for perl v5.24.0 =head1 DESCRIPTION This document describes the differences between the 5.22.0 release and the 5.24.0 release. =head1 Core Enhancements =head2 Postfix dereferencing is no longer experimental Using the C<postderef> and C<postderef_qq> features no longer emits a warning. Existing code that disables the C<experimental::postderef> warning category that they previously used will continue to work. The C<postderef> feature has no effect; all Perl code can use postfix dereferencing, regardless of what feature declarations are in scope. The C<5.24> feature bundle now includes the C<postderef_qq> feature. =head2 Unicode 8.0 is now supported For details on what is in this release, see L<http://www.unicode.org/versions/Unicode8.0.0/>. =head2 perl will now croak when closing an in-place output file fails Until now, failure to close the output file for an in-place edit was not detected, meaning that the input file could be clobbered without the edit being successfully completed. Now, when the output file cannot be closed successfully, an exception is raised. =head2 New C<\b{lb}> boundary in regular expressions C<lb> stands for Line Break. It is a Unicode property that determines where a line of text is suitable to break (typically so that it can be output without overflowing the available horizontal space). This capability has long been furnished by the L<Unicode::LineBreak> module, but now a light-weight, non-customizable version that is suitable for many purposes is in core Perl. =head2 C<qr/(?[ ])/> now works in UTF-8 locales L<Extended Bracketed Character Classes|perlrecharclass/Extended Bracketed Character Classes> now will successfully compile when S<C<use locale>> is in effect. The compiled pattern will use standard Unicode rules. If the runtime locale is not a UTF-8 one, a warning is raised and standard Unicode rules are used anyway. No tainting is done since the outcome does not actually depend on the locale. =head2 Integer shift (C<< << >> and C<< >> >>) now more explicitly defined Negative shifts are reverse shifts: left shift becomes right shift, and right shift becomes left shift. Shifting by the number of bits in a native integer (or more) is zero, except when the "overshift" is right shifting a negative value under C<use integer>, in which case the result is -1 (arithmetic shift). Until now negative shifting and overshifting have been undefined because they have relied on whatever the C implementation happens to do. For example, for the overshift a common C behavior is "modulo shift": 1 >> 64 == 1 >> (64 % 64) == 1 >> 0 == 1 # Common C behavior. # And the same for <<, while Perl now produces 0 for both. Now these behaviors are well-defined under Perl, regardless of what the underlying C implementation does. Note, however, that you are still constrained by the native integer width: you need to know how far left you can go. You can use for example: use Config; my $wordbits = $Config{uvsize} * 8; # Or $Config{uvsize} << 3. If you need a more bits on the left shift, you can use for example the C<bigint> pragma, or the C<Bit::Vector> module from CPAN. =head2 printf and sprintf now allow reordered precision arguments That is, C<< sprintf '|%.*2$d|', 2, 3 >> now returns C<|002|>. This extends the existing reordering mechanism (which allows reordering for arguments that are used as format fields, widths, and vector separators). =head2 More fields provided to C<sigaction> callback with C<SA_SIGINFO> When passing the C<SA_SIGINFO> flag to L<sigaction|POSIX/sigaction>, the C<errno>, C<status>, C<uid>, C<pid>, C<addr> and C<band> fields are now included in the hash passed to the handler, if supported by the platform. =head2 Hashbang redirection to Perl 6 Previously perl would redirect to another interpreter if it found a hashbang path unless the path contains "perl" (see L<perlrun>). To improve compatibility with Perl 6 this behavior has been extended to also redirect if "perl" is followed by "6". =head1 Security =head2 Set proper umask before calling C<mkstemp(3)> In 5.22 perl started setting umask to 0600 before calling C<mkstemp(3)> and restoring it afterwards. This wrongfully tells C<open(2)> to strip the owner read and write bits from the given mode before applying it, rather than the intended negation of leaving only those bits in place. Systems that use mode 0666 in C<mkstemp(3)> (like old versions of glibc) create a file with permissions 0066, leaving world read and write permissions regardless of current umask. This has been fixed by using umask 0177 instead. [perl #127322] =head2 Fix out of boundary access in Win32 path handling This is CVE-2015-8608. For more information see L<[perl #126755]|https://rt.perl.org/Ticket/Display.html?id=126755> =head2 Fix loss of taint in canonpath This is CVE-2015-8607. For more information see L<[perl #126862]|https://rt.perl.org/Ticket/Display.html?id=126862> =head2 Avoid accessing uninitialized memory in win32 C<crypt()> Added validation that will detect both a short salt and invalid characters in the salt. L<[perl #126922]|https://rt.perl.org/Ticket/Display.html?id=126922> =head2 Remove duplicate environment variables from C<environ> Previously, if an environment variable appeared more than once in C<environ[]>, C<%ENV> would contain the last entry for that name, while a typical C<getenv()> would return the first entry. We now make sure C<%ENV> contains the same as what C<getenv> returns. Second, we remove duplicates from C<environ[]>, so if a setting with that name is set in C<%ENV>, we won't pass an unsafe value to a child process. [CVE-2016-2381] =head1 Incompatible Changes =head2 The C<autoderef> feature has been removed The experimental C<autoderef> feature (which allowed calling C<push>, C<pop>, C<shift>, C<unshift>, C<splice>, C<keys>, C<values>, and C<each> on a scalar argument) has been deemed unsuccessful. It has now been removed; trying to use the feature (or to disable the C<experimental::autoderef> warning it previously triggered) now yields an exception. =head2 Lexical $_ has been removed C<my $_> was introduced in Perl 5.10, and subsequently caused much confusion with no obvious solution. In Perl 5.18.0, it was made experimental on the theory that it would either be removed or redesigned in a less confusing (but backward-incompatible) way. Over the following years, no alternatives were proposed. The feature has now been removed and will fail to compile. =head2 C<qr/\b{wb}/> is now tailored to Perl expectations This is now more suited to be a drop-in replacement for plain C<\b>, but giving better results for parsing natural language. Previously it strictly followed the current Unicode rules which calls for it to match between each white space character. Now it doesn't generally match within spans of white space, behaving like C<\b> does. See L<perlrebackslash/\b{wb}> =head2 Regular expression compilation errors Some regular expression patterns that had runtime errors now don't compile at all. Almost all Unicode properties using the C<\p{}> and C<\P{}> regular expression pattern constructs are now checked for validity at pattern compilation time, and invalid ones will cause the program to not compile. In earlier releases, this check was often deferred until run time. Whenever an error check is moved from run- to compile time, erroneous code is caught 100% of the time, whereas before it would only get caught if and when the offending portion actually gets executed, which for unreachable code might be never. =head2 C<qr/\N{}/> now disallowed under C<use re "strict"> An empty C<\N{}> makes no sense, but for backwards compatibility is accepted as doing nothing, though a deprecation warning is raised by default. But now this is a fatal error under the experimental feature L<re/'strict' mode>. =head2 Nested declarations are now disallowed A C<my>, C<our>, or C<state> declaration is no longer allowed inside of another C<my>, C<our>, or C<state> declaration. For example, these are now fatal: my ($x, my($y)); our (my $x); L<[perl #125587]|https://rt.perl.org/Ticket/Display.html?id=125587> L<[perl #121058]|https://rt.perl.org/Ticket/Display.html?id=121058> =head2 The C</\C/> character class has been removed. This regular expression character class was deprecated in v5.20.0 and has produced a deprecation warning since v5.22.0. It is now a compile-time error. If you need to examine the individual bytes that make up a UTF8-encoded character, then use C<utf8::encode()> on the string (or a copy) first. =head2 C<chdir('')> no longer chdirs home Using C<chdir('')> or C<chdir(undef)> to chdir home has been deprecated since perl v5.8, and will now fail. Use C<chdir()> instead. =head2 ASCII characters in variable names must now be all visible It was legal until now on ASCII platforms for variable names to contain non-graphical ASCII control characters (ordinals 0 through 31, and 127, which are the C0 controls and C<DELETE>). This usage has been deprecated since v5.20, and as of now causes a syntax error. The variables these names referred to are special, reserved by Perl for whatever use it may choose, now, or in the future. Each such variable has an alternative way of spelling it. Instead of the single non-graphic control character, a two character sequence beginning with a caret is used, like C<$^]> and C<${^GLOBAL_PHASE}>. Details are at L<perlvar>. It remains legal, though unwise and deprecated (raising a deprecation warning), to use certain non-graphic non-ASCII characters in variables names when not under S<C<use utf8>>. No code should do this, as all such variables are reserved by Perl, and Perl doesn't currently define any of them (but could at any time, without notice). =head2 An off by one issue in C<$Carp::MaxArgNums> has been fixed C<$Carp::MaxArgNums> is supposed to be the number of arguments to display. Prior to this version, it was instead showing C<$Carp::MaxArgNums> + 1 arguments, contrary to the documentation. =head2 Only blanks and tabs are now allowed within C<[...]> within C<(?[...])>. The experimental Extended Bracketed Character Classes can contain regular bracketed character classes within them. These differ from regular ones in that white space is generally ignored, unless escaped by preceding it with a backslash. The white space that is ignored is now limited to just tab C<\t> and SPACE characters. Previously, it was any white space. See L<perlrecharclass/Extended Bracketed Character Classes>. =head1 Deprecations =head2 Using code points above the platform's C<IV_MAX> is now deprecated Unicode defines code points in the range C<0..0x10FFFF>. Some standards at one time defined them up to 2**31 - 1, but Perl has allowed them to be as high as anything that will fit in a word on the platform being used. However, use of those above the platform's C<IV_MAX> is broken in some constructs, notably C<tr///>, regular expression patterns involving quantifiers, and in some arithmetic and comparison operations, such as being the upper limit of a loop. Now the use of such code points raises a deprecation warning, unless that warning category is turned off. C<IV_MAX> is typically 2**31 -1 on 32-bit platforms, and 2**63-1 on 64-bit ones. =head2 Doing bitwise operations on strings containing code points above 0xFF is deprecated The string bitwise operators treat their operands as strings of bytes, and values beyond 0xFF are nonsensical in this context. To operate on encoded bytes, first encode the strings. To operate on code points' numeric values, use C<split> and C<map ord>. In the future, this warning will be replaced by an exception. =head2 C<sysread()>, C<syswrite()>, C<recv()> and C<send()> are deprecated on :utf8 handles The C<sysread()>, C<recv()>, C<syswrite()> and C<send()> operators are deprecated on handles that have the C<:utf8> layer, either explicitly, or implicitly, eg., with the C<:encoding(UTF-16LE)> layer. Both C<sysread()> and C<recv()> currently use only the C<:utf8> flag for the stream, ignoring the actual layers. Since C<sysread()> and C<recv()> do no UTF-8 validation they can end up creating invalidly encoded scalars. Similarly, C<syswrite()> and C<send()> use only the C<:utf8> flag, otherwise ignoring any layers. If the flag is set, both write the value UTF-8 encoded, even if the layer is some different encoding, such as the example above. Ideally, all of these operators would completely ignore the C<:utf8> state, working only with bytes, but this would result in silently breaking existing code. To avoid this a future version of perl will throw an exception when any of C<sysread()>, C<recv()>, C<syswrite()> or C<send()> are called on handle with the C<:utf8> layer. =head1 Performance Enhancements =over 4 =item * The overhead of scope entry and exit has been considerably reduced, so for example subroutine calls, loops and basic blocks are all faster now. This empty function call now takes about a third less time to execute: sub f{} f(); =item * Many languages, such as Chinese, are caseless. Perl now knows about most common ones, and skips much of the work when a program tries to change case in them (like C<ucfirst()>) or match caselessly (C<qr//i>). This will speed up a program, such as a web server, that can operate on multiple languages, while it is operating on a caseless one. =item * C</fixed-substr/> has been made much faster. On platforms with a libc C<memchr()> implementation which makes good use of underlying hardware support, patterns which include fixed substrings will now often be much faster; for example with glibc on a recent x86_64 CPU, this: $s = "a" x 1000 . "wxyz"; $s =~ /wxyz/ for 1..30000 is now about 7 times faster. On systems with slow C<memchr()>, e.g. 32-bit ARM Raspberry Pi, there will be a small or little speedup. Conversely, some pathological cases, such as C<"ab" x 1000 =~ /aa/> will be slower now; up to 3 times slower on the rPi, 1.5x slower on x86_64. =item * Faster addition, subtraction and multiplication. Since 5.8.0, arithmetic became slower due to the need to support 64-bit integers. To deal with 64-bit integers, a lot more corner cases need to be checked, which adds time. We now detect common cases where there is no need to check for those corner cases, and special-case them. =item * Preincrement, predecrement, postincrement, and postdecrement have been made faster by internally splitting the functions which handled multiple cases into different functions. =item * Creating Perl debugger data structures (see L<perldebguts/"Debugger Internals">) for XSUBs and const subs has been removed. This removed one glob/scalar combo for each unique C<.c> file that XSUBs and const subs came from. On startup (C<perl -e"0">) about half a dozen glob/scalar debugger combos were created. Loading XS modules created more glob/scalar combos. These things were being created regardless of whether the perl debugger was being used, and despite the fact that it can't debug C code anyway =item * On Win32, C<stat>ing or C<-X>ing a path, if the file or directory does not exist, is now 3.5x faster than before. =item * Single arguments in list assign are now slightly faster: ($x) = (...); (...) = ($x); =item * Less peak memory is now used when compiling regular expression patterns. =back =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over =item * L<arybase> has been upgraded from version 0.10 to 0.11. =item * L<Attribute::Handlers> has been upgraded from version 0.97 to 0.99. =item * L<autodie> has been upgraded from version 2.26 to 2.29. =item * L<autouse> has been upgraded from version 1.08 to 1.11. =item * L<B> has been upgraded from version 1.58 to 1.62. =item * L<B::Deparse> has been upgraded from version 1.35 to 1.37. =item * L<base> has been upgraded from version 2.22 to 2.23. =item * L<Benchmark> has been upgraded from version 1.2 to 1.22. =item * L<bignum> has been upgraded from version 0.39 to 0.42. =item * L<bytes> has been upgraded from version 1.04 to 1.05. =item * L<Carp> has been upgraded from version 1.36 to 1.40. =item * L<Compress::Raw::Bzip2> has been upgraded from version 2.068 to 2.069. =item * L<Compress::Raw::Zlib> has been upgraded from version 2.068 to 2.069. =item * L<Config::Perl::V> has been upgraded from version 0.24 to 0.25. =item * L<CPAN::Meta> has been upgraded from version 2.150001 to 2.150005. =item * L<CPAN::Meta::Requirements> has been upgraded from version 2.132 to 2.140. =item * L<CPAN::Meta::YAML> has been upgraded from version 0.012 to 0.018. =item * L<Data::Dumper> has been upgraded from version 2.158 to 2.160. =item * L<Devel::Peek> has been upgraded from version 1.22 to 1.23. =item * L<Devel::PPPort> has been upgraded from version 3.31 to 3.32. =item * L<Dumpvalue> has been upgraded from version 1.17 to 1.18. =item * L<DynaLoader> has been upgraded from version 1.32 to 1.38. =item * L<Encode> has been upgraded from version 2.72 to 2.80. =item * L<encoding> has been upgraded from version 2.14 to 2.17. =item * L<encoding::warnings> has been upgraded from version 0.11 to 0.12. =item * L<English> has been upgraded from version 1.09 to 1.10. =item * L<Errno> has been upgraded from version 1.23 to 1.25. =item * L<experimental> has been upgraded from version 0.013 to 0.016. =item * L<ExtUtils::CBuilder> has been upgraded from version 0.280221 to 0.280225. =item * L<ExtUtils::Embed> has been upgraded from version 1.32 to 1.33. =item * L<ExtUtils::MakeMaker> has been upgraded from version 7.04_01 to 7.10_01. =item * L<ExtUtils::ParseXS> has been upgraded from version 3.28 to 3.31. =item * L<ExtUtils::Typemaps> has been upgraded from version 3.28 to 3.31. =item * L<feature> has been upgraded from version 1.40 to 1.42. =item * L<fields> has been upgraded from version 2.17 to 2.23. =item * L<File::Find> has been upgraded from version 1.29 to 1.34. =item * L<File::Glob> has been upgraded from version 1.24 to 1.26. =item * L<File::Path> has been upgraded from version 2.09 to 2.12_01. =item * L<File::Spec> has been upgraded from version 3.56 to 3.63. =item * L<Filter::Util::Call> has been upgraded from version 1.54 to 1.55. =item * L<Getopt::Long> has been upgraded from version 2.45 to 2.48. =item * L<Hash::Util> has been upgraded from version 0.18 to 0.19. =item * L<Hash::Util::FieldHash> has been upgraded from version 1.15 to 1.19. =item * L<HTTP::Tiny> has been upgraded from version 0.054 to 0.056. =item * L<I18N::Langinfo> has been upgraded from version 0.12 to 0.13. =item * L<if> has been upgraded from version 0.0604 to 0.0606. =item * L<IO> has been upgraded from version 1.35 to 1.36. =item * IO-Compress has been upgraded from version 2.068 to 2.069. =item * L<IPC::Open3> has been upgraded from version 1.18 to 1.20. =item * L<IPC::SysV> has been upgraded from version 2.04 to 2.06_01. =item * L<List::Util> has been upgraded from version 1.41 to 1.42_02. =item * L<locale> has been upgraded from version 1.06 to 1.08. =item * L<Locale::Codes> has been upgraded from version 3.34 to 3.37. =item * L<Math::BigInt> has been upgraded from version 1.9997 to 1.999715. =item * L<Math::BigInt::FastCalc> has been upgraded from version 0.31 to 0.40. =item * L<Math::BigRat> has been upgraded from version 0.2608 to 0.260802. =item * L<Module::CoreList> has been upgraded from version 5.20150520 to 5.20160320. =item * L<Module::Metadata> has been upgraded from version 1.000026 to 1.000031. =item * L<mro> has been upgraded from version 1.17 to 1.18. =item * L<ODBM_File> has been upgraded from version 1.12 to 1.14. =item * L<Opcode> has been upgraded from version 1.32 to 1.34. =item * L<parent> has been upgraded from version 0.232 to 0.234. =item * L<Parse::CPAN::Meta> has been upgraded from version 1.4414 to 1.4417. =item * L<Perl::OSType> has been upgraded from version 1.008 to 1.009. =item * L<perlfaq> has been upgraded from version 5.021009 to 5.021010. =item * L<PerlIO::encoding> has been upgraded from version 0.21 to 0.24. =item * L<PerlIO::mmap> has been upgraded from version 0.014 to 0.016. =item * L<PerlIO::scalar> has been upgraded from version 0.22 to 0.24. =item * L<PerlIO::via> has been upgraded from version 0.15 to 0.16. =item * L<Pod::Functions> has been upgraded from version 1.09 to 1.10. =item * L<Pod::Perldoc> has been upgraded from version 3.25 to 3.25_02. =item * L<Pod::Simple> has been upgraded from version 3.29 to 3.32. =item * L<Pod::Usage> has been upgraded from version 1.64 to 1.68. =item * L<POSIX> has been upgraded from version 1.53 to 1.65. =item * L<Scalar::Util> has been upgraded from version 1.41 to 1.42_02. =item * L<SDBM_File> has been upgraded from version 1.13 to 1.14. =item * L<SelfLoader> has been upgraded from version 1.22 to 1.23. =item * L<Socket> has been upgraded from version 2.018 to 2.020_03. =item * L<Storable> has been upgraded from version 2.53 to 2.56. =item * L<strict> has been upgraded from version 1.09 to 1.11. =item * L<Term::ANSIColor> has been upgraded from version 4.03 to 4.04. =item * L<Term::Cap> has been upgraded from version 1.15 to 1.17. =item * L<Test> has been upgraded from version 1.26 to 1.28. =item * L<Test::Harness> has been upgraded from version 3.35 to 3.36. =item * L<Thread::Queue> has been upgraded from version 3.05 to 3.08. =item * L<threads> has been upgraded from version 2.01 to 2.06. =item * L<threads::shared> has been upgraded from version 1.48 to 1.50. =item * L<Tie::File> has been upgraded from version 1.01 to 1.02. =item * L<Tie::Scalar> has been upgraded from version 1.03 to 1.04. =item * L<Time::HiRes> has been upgraded from version 1.9726 to 1.9732. =item * L<Time::Piece> has been upgraded from version 1.29 to 1.31. =item * L<Unicode::Collate> has been upgraded from version 1.12 to 1.14. =item * L<Unicode::Normalize> has been upgraded from version 1.18 to 1.25. =item * L<Unicode::UCD> has been upgraded from version 0.61 to 0.64. =item * L<UNIVERSAL> has been upgraded from version 1.12 to 1.13. =item * L<utf8> has been upgraded from version 1.17 to 1.19. =item * L<version> has been upgraded from version 0.9909 to 0.9916. =item * L<warnings> has been upgraded from version 1.32 to 1.36. =item * L<Win32> has been upgraded from version 0.51 to 0.52. =item * L<Win32API::File> has been upgraded from version 0.1202 to 0.1203. =item * L<XS::Typemap> has been upgraded from version 0.13 to 0.14. =item * L<XSLoader> has been upgraded from version 0.20 to 0.21. =back =head1 Documentation =head2 Changes to Existing Documentation =head3 L<perlapi> =over 4 =item * The process of using undocumented globals has been documented, namely, that one should send email to L<perl5-porters@perl.org|mailto:perl5-porters@perl.org> first to get the go-ahead for documenting and using an undocumented function or global variable. =back =head3 L<perlcall> =over 4 =item * A number of cleanups have been made to perlcall, including: =over 4 =item * use C<EXTEND(SP, n)> and C<PUSHs()> instead of C<XPUSHs()> where applicable and update prose to match =item * add POPu, POPul and POPpbytex to the "complete list of POP macros" and clarify the documentation for some of the existing entries, and a note about side-effects =item * add API documentation for POPu and POPul =item * use ERRSV more efficiently =item * approaches to thread-safety storage of SVs. =back =back =head3 L<perlfunc> =over 4 =item * The documentation of C<hex> has been revised to clarify valid inputs. =item * Better explain meaning of negative PIDs in C<waitpid>. L<[perl #127080]|https://rt.perl.org/Ticket/Display.html?id=127080> =item * General cleanup: there's more consistency now (in POD usage, grammar, code examples), better practices in code examples (use of C<my>, removal of bareword filehandles, dropped usage of C<&> when calling subroutines, ...), etc. =back =head3 L<perlguts> =over 4 =item * A new section has been added, L<perlguts/"Dynamic Scope and the Context Stack">, which explains how the perl context stack works. =back =head3 L<perllocale> =over 4 =item * A stronger caution about using locales in threaded applications is given. Locales are not thread-safe, and you can get wrong results or even segfaults if you use them there. =back =head3 L<perlmodlib> =over 4 =item * We now recommend contacting the module-authors list or PAUSE in seeking guidance on the naming of modules. =back =head3 L<perlop> =over 4 =item * The documentation of C<qx//> now describes how C<$?> is affected. =back =head3 L<perlpolicy> =over 4 =item * This note has been added to perlpolicy: While civility is required, kindness is encouraged; if you have any doubt about whether you are being civil, simply ask yourself, "Am I being kind?" and aspire to that. =back =head3 L<perlreftut> =over 4 =item * Fix some examples to be L<strict> clean. =back =head3 L<perlrebackslash> =over 4 =item * Clarify that in languages like Japanese and Thai, dictionary lookup is required to determine word boundaries. =back =head3 L<perlsub> =over 4 =item * Updated to note that anonymous subroutines can have signatures. =back =head3 L<perlsyn> =over 4 =item * Fixed a broken example where C<=> was used instead of C<==> in conditional in do/while example. =back =head3 L<perltie> =over 4 =item * The usage of C<FIRSTKEY> and C<NEXTKEY> has been clarified. =back =head3 L<perlunicode> =over 4 =item * Discourage use of 'In' as a prefix signifying the Unicode Block property. =back =head3 L<perlvar> =over 4 =item * The documentation of C<$@> was reworded to clarify that it is not just for syntax errors in C<eval>. L<[perl #124034]|https://rt.perl.org/Ticket/Display.html?id=124034> =item * The specific true value of C<$!{E...}> is now documented, noting that it is subject to change and not guaranteed. =item * Use of C<$OLD_PERL_VERSION> is now discouraged. =back =head3 L<perlxs> =over 4 =item * The documentation of C<PROTOTYPES> has been corrected; they are I<disabled> by default, not I<enabled>. =back =head1 Diagnostics The following additions or changes have been made to diagnostic output, including warnings and fatal error messages. For the complete list of diagnostic messages, see L<perldiag>. =head2 New Diagnostics =head3 New Errors =over 4 =item * L<%s must not be a named sequence in transliteration operator|perldiag/"%s must not be a named sequence in transliteration operator"> =item * L<Can't find Unicode property definition "%s" in regex;|perldiag/"Can't find Unicode property definition "%s" in regex; marked by <-- HERE in m/%s/"> =item * L<Can't redeclare "%s" in "%s"|perldiag/"Can't redeclare "%s" in "%s""> =item * L<Character following \p must be '{' or a single-character Unicode property name in regex;|perldiag/"Character following \%c must be '{' or a single-character Unicode property name in regex; marked by <-- HERE in m/%s/"> =item * L<Empty \%c in regex; marked by E<lt>-- HERE in mE<sol>%sE<sol> |perldiag/"Empty \%c in regex; marked by <-- HERE in mE<sol>%sE<sol>"> =item * L<Illegal user-defined property name|perldiag/"Illegal user-defined property name"> =item * L<Invalid number '%s' for -C option.|perldiag/"Invalid number '%s' for -C option."> =item * L<<< Sequence (?... not terminated in regex; marked by S<<-- HERE> in mE<sol>%sE<sol>|perldiag/"Sequence (?... not terminated in regex; marked by <-- HERE in mE<sol>%sE<sol>" >>> =item * L<<< Sequence (?PE<lt>... not terminated in regex; marked by E<lt>-- HERE in mE<sol>%sE<sol> |perldiag/"Sequence (?PE<lt>... not terminated in regex; marked by <-- HERE in mE<sol>%sE<sol>" >>> =item * L<Sequence (?PE<gt>... not terminated in regex; marked by E<lt>-- HERE in mE<sol>%sE<sol> |perldiag/"Sequence (?PE<gt>... not terminated in regex; marked by <-- HERE in mE<sol>%sE<sol>"> =back =head3 New Warnings =over 4 =item * L<Assuming NOT a POSIX class since %s in regex; marked by E<lt>-- HERE in mE<sol>%sE<sol>| perldiag/Assuming NOT a POSIX class since %s in regex; marked by <-- HERE in mE<sol>%sE<sol>> =item * L<%s() is deprecated on :utf8 handles|perldiag/"%s() is deprecated on :utf8 handles"> =back =head2 Changes to Existing Diagnostics =over 4 =item * Accessing the C<IO> part of a glob as C<FILEHANDLE> instead of C<IO> is no longer deprecated. It is discouraged to encourage uniformity (so that, for example, one can grep more easily) but it will not be removed. L<[perl #127060]|https://rt.perl.org/Ticket/Display.html?id=127060> =item * The diagnostic C<< Hexadecimal float: internal error >> has been changed to C<< Hexadecimal float: internal error (%s) >> to include more information. =item * L<Can't modify non-lvalue subroutine call of &%s|perldiag/"Can't modify non-lvalue subroutine call of &%s"> This error now reports the name of the non-lvalue subroutine you attempted to use as an lvalue. =item * When running out of memory during an attempt the increase the stack size, previously, perl would die using the cryptic message C<< panic: av_extend_guts() negative count (-9223372036854775681) >>. This has been fixed to show the prettier message: L<< Out of memory during stack extend|perldiag/"Out of memory during %s extend" >> =back =head1 Configuration and Compilation =over 4 =item * C<Configure> now acts as if the C<-O> option is always passed, allowing command line options to override saved configuration. This should eliminate confusion when command line options are ignored for no obvious reason. C<-O> is now permitted, but ignored. =item * Bison 3.0 is now supported. =item * F<Configure> no longer probes for F<libnm> by default. Originally this was the "New Math" library, but the name has been re-used by the GNOME NetworkManager. L<[perl #127131]|https://rt.perl.org/Ticket/Display.html?id=127131> =item * Added F<Configure> probes for C<newlocale>, C<freelocale>, and C<uselocale>. =item * C<< PPPort.so/PPPort.dll >> no longer get installed, as they are not used by C<< PPPort.pm >>, only by its test files. =item * It is now possible to specify which compilation date to show on C<< perl -V >> output, by setting the macro C<< PERL_BUILD_DATE >>. =item * Using the C<NO_HASH_SEED> define in combination with the default hash algorithm C<PERL_HASH_FUNC_ONE_AT_A_TIME_HARD> resulted in a fatal error while compiling the interpreter, since Perl 5.17.10. This has been fixed. =item * F<Configure> should handle spaces in paths a little better. =item * No longer generate EBCDIC POSIX-BC tables. We don't believe anyone is using Perl and POSIX-BC at this time, and by not generating these tables it saves time during development, and makes the resulting tar ball smaller. =item * The GNU Make makefile for Win32 now supports parallel builds. [perl #126632] =item * You can now build perl with MSVC++ on Win32 using GNU Make. [perl #126632] =item * The Win32 miniperl now has a real C<getcwd> which increases build performance resulting in C<getcwd()> being 605x faster in Win32 miniperl. =item * Configure now takes C<-Dusequadmath> into account when calculating the C<alignbytes> configuration variable. Previously the mis-calculated C<alignbytes> could cause alignment errors on debugging builds. [perl #127894] =back =head1 Testing =over 4 =item * A new test (F<t/op/aassign.t>) has been added to test the list assignment operator C<OP_AASSIGN>. =item * Parallel building has been added to the dmake C<makefile.mk> makefile. All Win32 compilers are supported. =back =head1 Platform Support =head2 Platform-Specific Notes =over 4 =item AmigaOS =over 4 =item * The AmigaOS port has been reintegrated into the main tree, based off of Perl 5.22.1. =back =item Cygwin =over 4 =item * Tests are more robust against unusual cygdrive prefixes. L<[perl #126834]|https://rt.perl.org/Ticket/Display.html?id=126834> =back =item EBCDIC =over 4 =item UTF-EBCDIC extended UTF-EBCDIC is like UTF-8, but for EBCDIC platforms. It now has been extended so that it can represent code points up to 2 ** 64 - 1 on platforms with 64-bit words. This brings it into parity with UTF-8. This enhancement requires an incompatible change to the representation of code points in the range 2 ** 30 to 2 ** 31 -1 (the latter was the previous maximum representable code point). This means that a file that contains one of these code points, written out with previous versions of perl cannot be read in, without conversion, by a perl containing this change. We do not believe any such files are in existence, but if you do have one, submit a ticket at L<perlbug@perl.org|mailto:perlbug@perl.org>, and we will write a conversion script for you. =item EBCDIC C<cmp()> and C<sort()> fixed for UTF-EBCDIC strings Comparing two strings that were both encoded in UTF-8 (or more precisely, UTF-EBCDIC) did not work properly until now. Since C<sort()> uses C<cmp()>, this fixes that as well. =item EBCDIC C<tr///> and C<y///> fixed for C<\N{}>, and C<S<use utf8>> ranges Perl v5.22 introduced the concept of portable ranges to regular expression patterns. A portable range matches the same set of characters no matter what platform is being run on. This concept is now extended to C<tr///>. See C<L<trE<sol>E<sol>E<sol>|perlop/trE<sol>SEARCHLISTE<sol>REPLACEMENTLISTE<sol>cdsr>>. There were also some problems with these operations under S<C<use utf8>>, which are now fixed =back =item FreeBSD =over 4 =item * Use the C<fdclose()> function from FreeBSD if it is available. L<[perl #126847]|https://rt.perl.org/Ticket/Display.html?id=126847> =back =item IRIX =over 4 =item * Under some circumstances IRIX stdio C<fgetc()> and C<fread()> set the errno to C<ENOENT>, which made no sense according to either IRIX or POSIX docs. Errno is now cleared in such cases. L<[perl #123977]|https://rt.perl.org/Ticket/Display.html?id=123977> =item * Problems when multiplying long doubles by infinity have been fixed. L<[perl #126396]|https://rt.perl.org/Ticket/Display.html?id=126396> =back =item MacOS X =over 4 =item * Until now OS X builds of perl have specified a link target of 10.3 (Panther, 2003) but have not specified a compiler target. From now on, builds of perl on OS X 10.6 or later (Snow Leopard, 2008) by default capture the current OS X version and specify that as the explicit build target in both compiler and linker flags, thus preserving binary compatibility for extensions built later regardless of changes in OS X, SDK, or compiler and linker versions. To override the default value used in the build and preserved in the flags, specify C<export MACOSX_DEPLOYMENT_TARGET=10.N> before configuring and building perl, where 10.N is the version of OS X you wish to target. In OS X 10.5 or earlier there is no change to the behavior present when those systems were current; the link target is still OS X 10.3 and there is no explicit compiler target. =item * Builds with both -DDEBUGGING and threading enabled would fail with a "panic: free from wrong pool" error when built or tested from Terminal on OS X. This was caused by perl's internal management of the environment conflicting with an atfork handler using the libc C<setenv()> function to update the environment. Perl now uses C<setenv()>/C<unsetenv()> to update the environment on OS X. L<[perl #126240]|https://rt.perl.org/Ticket/Display.html?id=126240> =back =item Solaris =over 4 =item * All Solaris variants now build a shared libperl Solaris and variants like OpenIndiana now always build with the shared Perl library (Configure -Duseshrplib). This was required for the OpenIndiana builds, but this has also been the setting for Oracle/Sun Perl builds for several years. =back =item Tru64 =over 4 =item * Workaround where Tru64 balks when prototypes are listed as C<< PERL_STATIC_INLINE >>, but where the test is build with C<< -DPERL_NO_INLINE_FUNCTIONS >>. =back =item VMS =over 4 =item * On VMS, the math function prototypes in C<math.h> are now visible under C++. Now building the POSIX extension with C++ will no longer crash. =item * VMS has had C<setenv>/C<unsetenv> since v7.0 (released in 1996), C<Perl_vmssetenv> now always uses C<setenv>/C<unsetenv>. =item * Perl now implements its own C<killpg> by scanning for processes in the specified process group, which may not mean exactly the same thing as a Unix process group, but allows us to send a signal to a parent (or master) process and all of its sub-processes. At the perl level, this means we can now send a negative pid like so: kill SIGKILL, -$pid; to signal all processes in the same group as C<$pid>. =item * For those C<%ENV> elements based on the CRTL environ array, we've always preserved case when setting them but did look-ups only after upcasing the key first, which made lower- or mixed-case entries go missing. This problem has been corrected by making C<%ENV> elements derived from the environ array case-sensitive on look-up as well as case-preserving on store. =item * Environment look-ups for C<PERL5LIB> and C<PERLLIB> previously only considered logical names, but now consider all sources of C<%ENV> as determined by C<PERL_ENV_TABLES> and as documented in L<perlvms/%ENV>. =item * The minimum supported version of VMS is now v7.3-2, released in 2003. As a side effect of this change, VAX is no longer supported as the terminal release of OpenVMS VAX was v7.3 in 2001. =back =item Win32 =over 4 =item * A new build option C<USE_NO_REGISTRY> has been added to the makefiles. This option is off by default, meaning the default is to do Windows registry lookups. This option stops Perl from looking inside the registry for anything. For what values are looked up in the registry see L<perlwin32>. Internally, in C, the name of this option is C<WIN32_NO_REGISTRY>. =item * The behavior of Perl using C<HKEY_CURRENT_USER\Software\Perl> and C<HKEY_LOCAL_MACHINE\Software\Perl> to lookup certain values, including C<%ENV> vars starting with C<PERL> has changed. Previously, the 2 keys were checked for entries at all times through the perl process's life time even if they did not exist. For performance reasons, now, if the root key (i.e. C<HKEY_CURRENT_USER\Software\Perl> or C<HKEY_LOCAL_MACHINE\Software\Perl>) does not exist at process start time, it will not be checked again for C<%ENV> override entries for the remainder of the perl process's life. This more closely matches Unix behavior in that the environment is copied or inherited on startup and changing the variable in the parent process or another process or editing F<.bashrc> will not change the environmental variable in other existing, running, processes. =item * One glob fetch was removed for each C<-X> or C<stat> call whether done from Perl code or internally from Perl's C code. The glob being looked up was C<${^WIN32_SLOPPY_STAT}> which is a special variable. This makes C<-X> and C<stat> slightly faster. =item * During miniperl's process startup, during the build process, 4 to 8 IO calls related to the process starting F<.pl> and the F<buildcustomize.pl> file were removed from the code opening and executing the first 1 or 2 F<.pl> files. =item * Builds using Microsoft Visual C++ 2003 and earlier no longer produce an "INTERNAL COMPILER ERROR" message. [perl #126045] =item * Visual C++ 2013 builds will now execute on XP and higher. Previously they would only execute on Vista and higher. =item * You can now build perl with GNU Make and GCC. [perl #123440] =item * C<truncate($filename, $size)> now works for files over 4GB in size. [perl #125347] =item * Parallel building has been added to the dmake C<makefile.mk> makefile. All Win32 compilers are supported. =item * Building a 64-bit perl with a 64-bit GCC but a 32-bit gmake would result in an invalid C<$Config{archname}> for the resulting perl. [perl #127584] =item * Errors set by Winsock functions are now put directly into C<$^E>, and the relevant C<WSAE*> error codes are now exported from the L<Errno> and L<POSIX> modules for testing this against. The previous behavior of putting the errors (converted to POSIX-style C<E*> error codes since Perl 5.20.0) into C<$!> was buggy due to the non-equivalence of like-named Winsock and POSIX error constants, a relationship between which has unfortunately been established in one way or another since Perl 5.8.0. The new behavior provides a much more robust solution for checking Winsock errors in portable software without accidentally matching POSIX tests that were intended for other OSes and may have different meanings for Winsock. The old behavior is currently retained, warts and all, for backwards compatibility, but users are encouraged to change any code that tests C<$!> against C<E*> constants for Winsock errors to instead test C<$^E> against C<WSAE*> constants. After a suitable deprecation period, the old behavior may be removed, leaving C<$!> unchanged after Winsock function calls, to avoid any possible confusion over which error variable to check. =back =item ppc64el =over 4 =item floating point The floating point format of ppc64el (Debian naming for little-endian PowerPC) is now detected correctly. =back =back =head1 Internal Changes =over 4 =item * The implementation of perl's context stack system, and its internal API, have been heavily reworked. Note that no significant changes have been made to any external APIs, but XS code which relies on such internal details may need to be fixed. The main changes are: =over 4 =item * The C<PUSHBLOCK()>, C<POPSUB()> etc. macros have been replaced with static inline functions such as C<cx_pushblock()>, C<cx_popsub()> etc. These use function args rather than implicitly relying on local vars such as C<gimme> and C<newsp> being available. Also their functionality has changed: in particular, C<cx_popblock()> no longer decrements C<cxstack_ix>. The ordering of the steps in the C<pp_leave*> functions involving C<cx_popblock()>, C<cx_popsub()> etc. has changed. See the new documentation, L<perlguts/"Dynamic Scope and the Context Stack">, for details on how to use them. =item * Various macros, which now consistently have a CX_ prefix, have been added: CX_CUR(), CX_LEAVE_SCOPE(), CX_POP() or renamed: CX_POP_SAVEARRAY(), CX_DEBUG(), CX_PUSHSUBST(), CX_POPSUBST() =item * C<cx_pushblock()> now saves C<PL_savestack_ix> and C<PL_tmps_floor>, so C<pp_enter*> and C<pp_leave*> no longer do ENTER; SAVETMPS; ....; LEAVE =item * C<cx_popblock()> now also restores C<PL_curpm>. =item * In C<dounwind()> for every context type, the current savestack frame is now processed before each context is popped; formerly this was only done for sub-like context frames. This action has been removed from C<cx_popsub()> and placed into its own macro, C<CX_LEAVE_SCOPE(cx)>, which must be called before C<cx_popsub()> etc. C<dounwind()> now also does a C<cx_popblock()> on the last popped frame (formerly it only did the C<cx_popsub()> etc. actions on each frame). =item * The temps stack is now freed on scope exit; previously, temps created during the last statement of a block wouldn't be freed until the next C<nextstate> following the block (apart from an existing hack that did this for recursive subs in scalar context); and in something like C<f(g())>, the temps created by the last statement in C<g()> would formerly not be freed until the statement following the return from C<f()>. =item * Most values that were saved on the savestack on scope entry are now saved in suitable new fields in the context struct, and saved and restored directly by C<cx_pushfoo()> and C<cx_popfoo()>, which is much faster. =item * Various context struct fields have been added, removed or modified. =item * The handling of C<@_> in C<cx_pushsub()> and C<cx_popsub()> has been considerably tidied up, including removing the C<argarray> field from the context struct, and extracting out some common (but rarely used) code into a separate function, C<clear_defarray()>. Also, useful subsets of C<cx_popsub()> which had been unrolled in places like C<pp_goto> have been gathered into the new functions C<cx_popsub_args()> and C<cx_popsub_common()>. =item * C<pp_leavesub> and C<pp_leavesublv> now use the same function as the rest of the C<pp_leave*>'s to process return args. =item * C<CXp_FOR_PAD> and C<CXp_FOR_GV> flags have been added, and C<CXt_LOOP_FOR> has been split into C<CXt_LOOP_LIST>, C<CXt_LOOP_ARY>. =item * Some variables formerly declared by C<dMULTICALL> (but not documented) have been removed. =back =item * The obscure C<PL_timesbuf> variable, effectively a vestige of Perl 1, has been removed. It was documented as deprecated in Perl 5.20, with a statement that it would be removed early in the 5.21.x series; that has now finally happened. L<[perl #121351]|https://rt.perl.org/Ticket/Display.html?id=121351> =item * An unwarranted assertion in C<Perl_newATTRSUB_x()> has been removed. If a stub subroutine definition with a prototype has been seen, then any subsequent stub (or definition) of the same subroutine with an attribute was causing an assertion failure because of a null pointer. L<[perl #126845]|https://rt.perl.org/Ticket/Display.html?id=126845> =item * C<::> has been replaced by C<__> in C<ExtUtils::ParseXS>, like it's done for parameters/return values. This is more consistent, and simplifies writing XS code wrapping C++ classes into a nested Perl namespace (it requires only a typedef for C<Foo__Bar> rather than two, one for C<Foo_Bar> and the other for C<Foo::Bar>). =item * The C<to_utf8_case()> function is now deprecated. Instead use C<toUPPER_utf8>, C<toTITLE_utf8>, C<toLOWER_utf8>, and C<toFOLD_utf8>. (See L<http://nntp.perl.org/group/perl.perl5.porters/233287>.) =item * Perl core code and the threads extension have been annotated so that, if Perl is configured to use threads, then during compile-time clang (3.6 or later) will warn about suspicious uses of mutexes. See L<http://clang.llvm.org/docs/ThreadSafetyAnalysis.html> for more information. =item * The C<signbit()> emulation has been enhanced. This will help older and/or more exotic platforms or configurations. =item * Most EBCDIC-specific code in the core has been unified with non-EBCDIC code, to avoid repetition and make maintenance easier. =item * MSWin32 code for C<$^X> has been moved out of the F<win32> directory to F<caretx.c>, where other operating systems set that variable. =item * C<< sv_ref() >> is now part of the API. =item * L<perlapi/sv_backoff> had its return type changed from C<int> to C<void>. It previously has always returned C<0> since Perl 5.000 stable but that was undocumented. Although C<sv_backoff> is marked as public API, XS code is not expected to be impacted since the proper API call would be through public API C<sv_setsv(sv, &PL_sv_undef)>, or quasi-public C<SvOOK_off>, or non-public C<SvOK_off> calls, and the return value of C<sv_backoff> was previously a meaningless constant that can be rewritten as C<(sv_backoff(sv),0)>. =item * The C<EXTEND> and C<MEXTEND> macros have been improved to avoid various issues with integer truncation and wrapping. In particular, some casts formerly used within the macros have been removed. This means for example that passing an unsigned C<nitems> argument is likely to raise a compiler warning now (it's always been documented to require a signed value; formerly int, lately SSize_t). =item * C<PL_sawalias> and C<GPf_ALIASED_SV> have been removed. =item * C<GvASSIGN_GENERATION> and C<GvASSIGN_GENERATION_set> have been removed. =back =head1 Selected Bug Fixes =over 4 =item * It now works properly to specify a user-defined property, such as qr/\p{mypkg1::IsMyProperty}/i with C</i> caseless matching, an explicit package name, and I<IsMyProperty> not defined at the time of the pattern compilation. =item * Perl's C<memcpy()>, C<memmove()>, C<memset()> and C<memcmp()> fallbacks are now more compatible with the originals. [perl #127619] =item * Fixed the issue where a C<< s///r >>) with B<< -DPERL_NO_COW >> attempts to modify the source SV, resulting in the program dying. [perl #127635] =item * Fixed an EBCDIC-platform-only case where a pattern could fail to match. This occurred when matching characters from the set of C1 controls when the target matched string was in UTF-8. =item * Narrow the filename check in F<strict.pm> and F<warnings.pm>. Previously, it assumed that if the filename (without the F<.pmc?> extension) differed from the package name, if was a misspelled use statement (i.e. C<use Strict> instead of C<use strict>). We now check whether there's really a miscapitalization happening, and not some other issue. =item * Turn an assertion into a more user friendly failure when parsing regexes. [perl #127599] =item * Correctly raise an error when trying to compile patterns with unterminated character classes while there are trailing backslashes. [perl #126141]. =item * Line numbers larger than 2**31-1 but less than 2**32 are no longer returned by C<caller()> as negative numbers. [perl #126991] =item * C<< unless ( I<assignment> ) >> now properly warns when syntax warnings are enabled. [perl #127122] =item * Setting an C<ISA> glob to an array reference now properly adds C<isaelem> magic to any existing elements. Previously modifying such an element would not update the ISA cache, so method calls would call the wrong function. Perl would also crash if the C<ISA> glob was destroyed, since new code added in 5.23.7 would try to release the C<isaelem> magic from the elements. [perl #127351] =item * If a here-doc was found while parsing another operator, the parser had already read end of file, and the here-doc was not terminated, perl could produce an assertion or a segmentation fault. This now reliably complains about the unterminated here-doc. [perl #125540] =item * C<untie()> would sometimes return the last value returned by the C<UNTIE()> handler as well as its normal value, messing up the stack. [perl #126621] =item * Fixed an operator precedence problem when C< castflags & 2> is true. [perl #127474] =item * Caching of DESTROY methods could result in a non-pointer or a non-STASH stored in the C<SvSTASH()> slot of a stash, breaking the B C<STASH()> method. The DESTROY method is now cached in the MRO metadata for the stash. [perl #126410] =item * The AUTOLOAD method is now called when searching for a DESTROY method, and correctly sets C<$AUTOLOAD> too. [perl #124387] [perl #127494] =item * Avoid parsing beyond the end of the buffer when processing a C<#line> directive with no filename. [perl #127334] =item * Perl now raises a warning when a regular expression pattern looks like it was supposed to contain a POSIX class, like C<qr/[[:alpha:]]/>, but there was some slight defect in its specification which causes it to instead be treated as a regular bracketed character class. An example would be missing the second colon in the above like this: C<qr/[[:alpha]]/>. This compiles to match a sequence of two characters. The second is C<"]">, and the first is any of: C<"[">, C<":">, C<"a">, C<"h">, C<"l">, or C<"p">. This is unlikely to be the intended meaning, and now a warning is raised. No warning is raised unless the specification is very close to one of the 14 legal POSIX classes. (See L<perlrecharclass/POSIX Character Classes>.) [perl #8904] =item * Certain regex patterns involving a complemented POSIX class in an inverted bracketed character class, and matching something else optionally would improperly fail to match. An example of one that could fail is C<qr/_?[^\Wbar]\x{100}/>. This has been fixed. [perl #127537] =item * Perl 5.22 added support to the C99 hexadecimal floating point notation, but sometimes misparses hex floats. This has been fixed. [perl #127183] =item * A regression that allowed undeclared barewords in hash keys to work despite strictures has been fixed. L<[perl #126981]|https://rt.perl.org/Ticket/Display.html?id=126981> =item * Calls to the placeholder C<&PL_sv_yes> used internally when an C<import()> or C<unimport()> method isn't found now correctly handle scalar context. L<[perl #126042]|https://rt.perl.org/Ticket/Display.html?id=126042> =item * Report more context when we see an array where we expect to see an operator and avoid an assertion failure. L<[perl #123737]|https://rt.perl.org/Ticket/Display.html?id=123737> =item * Modifying an array that was previously a package C<@ISA> no longer causes assertion failures or crashes. L<[perl #123788]|https://rt.perl.org/Ticket/Display.html?id=123788> =item * Retain binary compatibility across plain and DEBUGGING perl builds. L<[perl #127212]|https://rt.perl.org/Ticket/Display.html?id=127212> =item * Avoid leaking memory when setting C<$ENV{foo}> on darwin. L<[perl #126240]|https://rt.perl.org/Ticket/Display.html?id=126240> =item * C</...\G/> no longer crashes on utf8 strings. When C<\G> is a fixed number of characters from the start of the regex, perl needs to count back that many characters from the current C<pos()> position and start matching from there. However, it was counting back bytes rather than characters, which could lead to panics on utf8 strings. =item * In some cases operators that return integers would return negative integers as large positive integers. L<[perl #126635]|https://rt.perl.org/Ticket/Display.html?id=126635> =item * The C<pipe()> operator would assert for DEBUGGING builds instead of producing the correct error message. The condition asserted on is detected and reported on correctly without the assertions, so the assertions were removed. L<[perl #126480]|https://rt.perl.org/Ticket/Display.html?id=126480> =item * In some cases, failing to parse a here-doc would attempt to use freed memory. This was caused by a pointer not being restored correctly. L<[perl #126443]|https://rt.perl.org/Ticket/Display.html?id=126443> =item * C<< @x = sort { *a = 0; $a <=> $b } 0 .. 1 >> no longer frees the GP for *a before restoring its SV slot. L<[perl #124097]|https://rt.perl.org/Ticket/Display.html?id=124097> =item * Multiple problems with the new hexadecimal floating point printf format C<%a> were fixed: L<[perl #126582]|https://rt.perl.org/Ticket/Display.html?id=126582>, L<[perl #126586]|https://rt.perl.org/Ticket/Display.html?id=126586>, L<[perl #126822]|https://rt.perl.org/Ticket/Display.html?id=126822> =item * Calling C<mg_set()> in C<leave_scope()> no longer leaks. =item * A regression from Perl v5.20 was fixed in which debugging output of regular expression compilation was wrong. (The pattern was correctly compiled, but what got displayed for it was wrong.) =item * C<\b{sb}> works much better. In Perl v5.22.0, this new construct didn't seem to give the expected results, yet passed all the tests in the extensive suite furnished by Unicode. It turns out that it was because these were short input strings, and the failures had to do with longer inputs. =item * Certain syntax errors in L<perlrecharclass/Extended Bracketed Character Classes> caused panics instead of the proper error message. This has now been fixed. [perl #126481] =item * Perl 5.20 added a message when a quantifier in a regular expression was useless, but then caused the parser to skip it; this caused the surplus quantifier to be silently ignored, instead of throwing an error. This is now fixed. [perl #126253] =item * The switch to building non-XS modules last in win32/makefile.mk (introduced by design as part of the changes to enable parallel building) caused the build of POSIX to break due to problems with the version module. This is now fixed. =item * Improved parsing of hex float constants. =item * Fixed an issue with C<< pack >> where C<< pack "H" >> (and C<< pack "h" >>) could read past the source when given a non-utf8 source, and a utf8 target. [perl #126325] =item * Fixed several cases where perl would abort due to a segmentation fault, or a C-level assert. [perl #126615], [perl #126602], [perl #126193]. =item * There were places in regular expression patterns where comments (C<(?#...)>) weren't allowed, but should have been. This is now fixed. L<[perl #116639]|https://rt.perl.org/Ticket/Display.html?id=116639> =item * Some regressions from Perl 5.20 have been fixed, in which some syntax errors in L<C<(?[...])>|perlrecharclass/Extended Bracketed Character Classes> constructs within regular expression patterns could cause a segfault instead of a proper error message. L<[perl #126180]|https://rt.perl.org/Ticket/Display.html?id=126180> L<[perl #126404]|https://rt.perl.org/Ticket/Display.html?id=126404> =item * Another problem with L<C<(?[...])>|perlrecharclass/Extended Bracketed Character Classes> constructs has been fixed wherein things like C<\c]> could cause panics. L<[perl #126181]|https://rt.perl.org/Ticket/Display.html?id=126181> =item * Some problems with attempting to extend the perl stack to around 2G or 4G entries have been fixed. This was particularly an issue on 32-bit perls built to use 64-bit integers, and was easily noticeable with the list repetition operator, e.g. @a = (1) x $big_number Formerly perl may have crashed, depending on the exact value of C<$big_number>; now it will typically raise an exception. L<[perl #125937]|https://rt.perl.org/Ticket/Display.html?id=125937> =item * In a regex conditional expression C<(?(condition)yes-pattern|no-pattern)>, if the condition is C<(?!)> then perl failed the match outright instead of matching the no-pattern. This has been fixed. L<[perl #126222]|https://rt.perl.org/Ticket/Display.html?id=126222> =item * The special backtracking control verbs C<(*VERB:ARG)> now all allow an optional argument and set C<REGERROR>/C<REGMARK> appropriately as well. L<[perl #126186]|https://rt.perl.org/Ticket/Display.html?id=126186> =item * Several bugs, including a segmentation fault, have been fixed with the boundary checking constructs (introduced in Perl 5.22) C<\b{gcb}>, C<\b{sb}>, C<\b{wb}>, C<\B{gcb}>, C<\B{sb}>, and C<\B{wb}>. All the C<\B{}> ones now match an empty string; none of the C<\b{}> ones do. L<[perl #126319]|https://rt.perl.org/Ticket/Display.html?id=126319> =item * Duplicating a closed file handle for write no longer creates a filename of the form F<GLOB(0xXXXXXXXX)>. [perl #125115] =item * Warning fatality is now ignored when rewinding the stack. This prevents infinite recursion when the now fatal error also causes rewinding of the stack. [perl #123398] =item * In perl v5.22.0, the logic changed when parsing a numeric parameter to the -C option, such that the successfully parsed number was not saved as the option value if it parsed to the end of the argument. [perl #125381] =item * The PadlistNAMES macro is an lvalue again. =item * Zero -DPERL_TRACE_OPS memory for sub-threads. C<perl_clone_using()> was missing Zero init of PL_op_exec_cnt[]. This caused sub-threads in threaded -DPERL_TRACE_OPS builds to spew exceedingly large op-counts at destruct. These counts would print %x as "ABABABAB", clearly a mem-poison value. =item * A leak in the XS typemap caused one scalar to be leaked each time a C<FILE *> or a C<PerlIO *> was C<OUTPUT:>ed or imported to Perl, since perl 5.000. These particular typemap entries are thought to be extremely rarely used by XS modules. [perl #124181] =item * C<alarm()> and C<sleep()> will now warn if the argument is a negative number and return undef. Previously they would pass the negative value to the underlying C function which may have set up a timer with a surprising value. =item * Perl can again be compiled with any Unicode version. This used to (mostly) work, but was lost in v5.18 through v5.20. The property C<Name_Alias> did not exist prior to Unicode 5.0. L<Unicode::UCD> incorrectly said it did. This has been fixed. =item * Very large code-points (beyond Unicode) in regular expressions no longer cause a buffer overflow in some cases when converted to UTF-8. L<[perl #125826]|https://rt.perl.org/Ticket/Display.html?id=125826> =item * The integer overflow check for the range operator (...) in list context now correctly handles the case where the size of the range is larger than the address space. This could happen on 32-bits with -Duse64bitint. L<[perl #125781]|https://rt.perl.org/Ticket/Display.html?id=125781> =item * A crash with C<< %::=(); J->${\"::"} >> has been fixed. L<[perl #125541]|https://rt.perl.org/Ticket/Display.html?id=125541> =item * C<qr/(?[ () ])/> no longer segfaults, giving a syntax error message instead. [perl #125805] =item * Regular expression possessive quantifier v5.20 regression now fixed. C<qr/>I<PAT>C<{>I<min>,I<max>C<}+>C</> is supposed to behave identically to C<qr/(?E<gt>>I<PAT>C<{>I<min>,I<max>C<})/>. Since v5.20, this didn't work if I<min> and I<max> were equal. [perl #125825] =item * C<< BEGIN <> >> no longer segfaults and properly produces an error message. [perl #125341] =item * In C<tr///> an illegal backwards range like C<tr/\x{101}-\x{100}//> was not always detected, giving incorrect results. This is now fixed. =back =head1 Acknowledgements Perl 5.24.0 represents approximately 11 months of development since Perl 5.24.0 and contains approximately 360,000 lines of changes across 1,800 files from 75 authors. Excluding auto-generated files, documentation and release tools, there were approximately 250,000 lines of changes to 1,200 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.24.0: Aaron Crane, Aaron Priven, Abigail, Achim Gratz, Alexander D'Archangel, Alex Vandiver, Andreas König, Andy Broad, Andy Dougherty, Aristotle Pagaltzis, Chase Whitener, Chas. Owens, Chris 'BinGOs' Williams, Craig A. Berry, Dagfinn Ilmari Mannsåker, Dan Collins, Daniel Dragan, David Golden, David Mitchell, Doug Bell, Dr.Ruud, Ed Avis, Ed J, Father Chrysostomos, Herbert Breunung, H.Merijn Brand, Hugo van der Sanden, Ivan Pozdeev, James E Keenan, Jan Dubois, Jarkko Hietaniemi, Jerry D. Hedden, Jim Cromie, John Peacock, John SJ Anderson, Karen Etheridge, Karl Williamson, kmx, Leon Timmermans, Ludovic E. R. Tolhurst-Cleaver, Lukas Mai, Martijn Lievaart, Matthew Horsfall, Mattia Barbon, Max Maischein, Mohammed El-Afifi, Nicholas Clark, Nicolas R., Niko Tyni, Peter John Acklam, Peter Martini, Peter Rabbitson, Pip Cet, Rafael Garcia-Suarez, Reini Urban, Ricardo Signes, Sawyer X, Shlomi Fish, Sisyphus, Stanislaw Pusep, Steffen Müller, Stevan Little, Steve Hay, Sullivan Beck, Thomas Sibley, Todd Rinaldo, Tom Hukins, Tony Cook, Unicode Consortium, Victor Adam, Vincent Pit, Vladimir Timofeev, Yves Orton, Zachary Storer, Zefram. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at https://rt.perl.org/ . There may also be information at http://www.perl.org/ , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications which make it inappropriate to send to a publicly archived mailing list, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perltie.pod 0000644 00000114622 15125556335 0006734 0 ustar 00 =head1 NAME X<tie> perltie - how to hide an object class in a simple variable =head1 SYNOPSIS tie VARIABLE, CLASSNAME, LIST $object = tied VARIABLE untie VARIABLE =head1 DESCRIPTION Prior to release 5.0 of Perl, a programmer could use dbmopen() to connect an on-disk database in the standard Unix dbm(3x) format magically to a %HASH in their program. However, their Perl was either built with one particular dbm library or another, but not both, and you couldn't extend this mechanism to other packages or types of variables. Now you can. The tie() function binds a variable to a class (package) that will provide the implementation for access methods for that variable. Once this magic has been performed, accessing a tied variable automatically triggers method calls in the proper class. The complexity of the class is hidden behind magic methods calls. The method names are in ALL CAPS, which is a convention that Perl uses to indicate that they're called implicitly rather than explicitly--just like the BEGIN() and END() functions. In the tie() call, C<VARIABLE> is the name of the variable to be enchanted. C<CLASSNAME> is the name of a class implementing objects of the correct type. Any additional arguments in the C<LIST> are passed to the appropriate constructor method for that class--meaning TIESCALAR(), TIEARRAY(), TIEHASH(), or TIEHANDLE(). (Typically these are arguments such as might be passed to the dbminit() function of C.) The object returned by the "new" method is also returned by the tie() function, which would be useful if you wanted to access other methods in C<CLASSNAME>. (You don't actually have to return a reference to a right "type" (e.g., HASH or C<CLASSNAME>) so long as it's a properly blessed object.) You can also retrieve a reference to the underlying object using the tied() function. Unlike dbmopen(), the tie() function will not C<use> or C<require> a module for you--you need to do that explicitly yourself. =head2 Tying Scalars X<scalar, tying> A class implementing a tied scalar should define the following methods: TIESCALAR, FETCH, STORE, and possibly UNTIE and/or DESTROY. Let's look at each in turn, using as an example a tie class for scalars that allows the user to do something like: tie $his_speed, 'Nice', getppid(); tie $my_speed, 'Nice', $$; And now whenever either of those variables is accessed, its current system priority is retrieved and returned. If those variables are set, then the process's priority is changed! We'll use Jarkko Hietaniemi <F<jhi@iki.fi>>'s BSD::Resource class (not included) to access the PRIO_PROCESS, PRIO_MIN, and PRIO_MAX constants from your system, as well as the getpriority() and setpriority() system calls. Here's the preamble of the class. package Nice; use Carp; use BSD::Resource; use strict; $Nice::DEBUG = 0 unless defined $Nice::DEBUG; =over 4 =item TIESCALAR classname, LIST X<TIESCALAR> This is the constructor for the class. That means it is expected to return a blessed reference to a new scalar (probably anonymous) that it's creating. For example: sub TIESCALAR { my $class = shift; my $pid = shift || $$; # 0 means me if ($pid !~ /^\d+$/) { carp "Nice::Tie::Scalar got non-numeric pid $pid" if $^W; return undef; } unless (kill 0, $pid) { # EPERM or ERSCH, no doubt carp "Nice::Tie::Scalar got bad pid $pid: $!" if $^W; return undef; } return bless \$pid, $class; } This tie class has chosen to return an error rather than raising an exception if its constructor should fail. While this is how dbmopen() works, other classes may well not wish to be so forgiving. It checks the global variable C<$^W> to see whether to emit a bit of noise anyway. =item FETCH this X<FETCH> This method will be triggered every time the tied variable is accessed (read). It takes no arguments beyond its self reference, which is the object representing the scalar we're dealing with. Because in this case we're using just a SCALAR ref for the tied scalar object, a simple $$self allows the method to get at the real value stored there. In our example below, that real value is the process ID to which we've tied our variable. sub FETCH { my $self = shift; confess "wrong type" unless ref $self; croak "usage error" if @_; my $nicety; local($!) = 0; $nicety = getpriority(PRIO_PROCESS, $$self); if ($!) { croak "getpriority failed: $!" } return $nicety; } This time we've decided to blow up (raise an exception) if the renice fails--there's no place for us to return an error otherwise, and it's probably the right thing to do. =item STORE this, value X<STORE> This method will be triggered every time the tied variable is set (assigned). Beyond its self reference, it also expects one (and only one) argument: the new value the user is trying to assign. Don't worry about returning a value from STORE; the semantic of assignment returning the assigned value is implemented with FETCH. sub STORE { my $self = shift; confess "wrong type" unless ref $self; my $new_nicety = shift; croak "usage error" if @_; if ($new_nicety < PRIO_MIN) { carp sprintf "WARNING: priority %d less than minimum system priority %d", $new_nicety, PRIO_MIN if $^W; $new_nicety = PRIO_MIN; } if ($new_nicety > PRIO_MAX) { carp sprintf "WARNING: priority %d greater than maximum system priority %d", $new_nicety, PRIO_MAX if $^W; $new_nicety = PRIO_MAX; } unless (defined setpriority(PRIO_PROCESS, $$self, $new_nicety)) { confess "setpriority failed: $!"; } } =item UNTIE this X<UNTIE> This method will be triggered when the C<untie> occurs. This can be useful if the class needs to know when no further calls will be made. (Except DESTROY of course.) See L</The C<untie> Gotcha> below for more details. =item DESTROY this X<DESTROY> This method will be triggered when the tied variable needs to be destructed. As with other object classes, such a method is seldom necessary, because Perl deallocates its moribund object's memory for you automatically--this isn't C++, you know. We'll use a DESTROY method here for debugging purposes only. sub DESTROY { my $self = shift; confess "wrong type" unless ref $self; carp "[ Nice::DESTROY pid $$self ]" if $Nice::DEBUG; } =back That's about all there is to it. Actually, it's more than all there is to it, because we've done a few nice things here for the sake of completeness, robustness, and general aesthetics. Simpler TIESCALAR classes are certainly possible. =head2 Tying Arrays X<array, tying> A class implementing a tied ordinary array should define the following methods: TIEARRAY, FETCH, STORE, FETCHSIZE, STORESIZE, CLEAR and perhaps UNTIE and/or DESTROY. FETCHSIZE and STORESIZE are used to provide C<$#array> and equivalent C<scalar(@array)> access. The methods POP, PUSH, SHIFT, UNSHIFT, SPLICE, DELETE, and EXISTS are required if the perl operator with the corresponding (but lowercase) name is to operate on the tied array. The B<Tie::Array> class can be used as a base class to implement the first five of these in terms of the basic methods above. The default implementations of DELETE and EXISTS in B<Tie::Array> simply C<croak>. In addition EXTEND will be called when perl would have pre-extended allocation in a real array. For this discussion, we'll implement an array whose elements are a fixed size at creation. If you try to create an element larger than the fixed size, you'll take an exception. For example: use FixedElem_Array; tie @array, 'FixedElem_Array', 3; $array[0] = 'cat'; # ok. $array[1] = 'dogs'; # exception, length('dogs') > 3. The preamble code for the class is as follows: package FixedElem_Array; use Carp; use strict; =over 4 =item TIEARRAY classname, LIST X<TIEARRAY> This is the constructor for the class. That means it is expected to return a blessed reference through which the new array (probably an anonymous ARRAY ref) will be accessed. In our example, just to show you that you don't I<really> have to return an ARRAY reference, we'll choose a HASH reference to represent our object. A HASH works out well as a generic record type: the C<{ELEMSIZE}> field will store the maximum element size allowed, and the C<{ARRAY}> field will hold the true ARRAY ref. If someone outside the class tries to dereference the object returned (doubtless thinking it an ARRAY ref), they'll blow up. This just goes to show you that you should respect an object's privacy. sub TIEARRAY { my $class = shift; my $elemsize = shift; if ( @_ || $elemsize =~ /\D/ ) { croak "usage: tie ARRAY, '" . __PACKAGE__ . "', elem_size"; } return bless { ELEMSIZE => $elemsize, ARRAY => [], }, $class; } =item FETCH this, index X<FETCH> This method will be triggered every time an individual element the tied array is accessed (read). It takes one argument beyond its self reference: the index whose value we're trying to fetch. sub FETCH { my $self = shift; my $index = shift; return $self->{ARRAY}->[$index]; } If a negative array index is used to read from an array, the index will be translated to a positive one internally by calling FETCHSIZE before being passed to FETCH. You may disable this feature by assigning a true value to the variable C<$NEGATIVE_INDICES> in the tied array class. As you may have noticed, the name of the FETCH method (et al.) is the same for all accesses, even though the constructors differ in names (TIESCALAR vs TIEARRAY). While in theory you could have the same class servicing several tied types, in practice this becomes cumbersome, and it's easiest to keep them at simply one tie type per class. =item STORE this, index, value X<STORE> This method will be triggered every time an element in the tied array is set (written). It takes two arguments beyond its self reference: the index at which we're trying to store something and the value we're trying to put there. In our example, C<undef> is really C<$self-E<gt>{ELEMSIZE}> number of spaces so we have a little more work to do here: sub STORE { my $self = shift; my( $index, $value ) = @_; if ( length $value > $self->{ELEMSIZE} ) { croak "length of $value is greater than $self->{ELEMSIZE}"; } # fill in the blanks $self->STORESIZE( $index ) if $index > $self->FETCHSIZE(); # right justify to keep element size for smaller elements $self->{ARRAY}->[$index] = sprintf "%$self->{ELEMSIZE}s", $value; } Negative indexes are treated the same as with FETCH. =item FETCHSIZE this X<FETCHSIZE> Returns the total number of items in the tied array associated with object I<this>. (Equivalent to C<scalar(@array)>). For example: sub FETCHSIZE { my $self = shift; return scalar @{$self->{ARRAY}}; } =item STORESIZE this, count X<STORESIZE> Sets the total number of items in the tied array associated with object I<this> to be I<count>. If this makes the array larger then class's mapping of C<undef> should be returned for new positions. If the array becomes smaller then entries beyond count should be deleted. In our example, 'undef' is really an element containing C<$self-E<gt>{ELEMSIZE}> number of spaces. Observe: sub STORESIZE { my $self = shift; my $count = shift; if ( $count > $self->FETCHSIZE() ) { foreach ( $count - $self->FETCHSIZE() .. $count ) { $self->STORE( $_, '' ); } } elsif ( $count < $self->FETCHSIZE() ) { foreach ( 0 .. $self->FETCHSIZE() - $count - 2 ) { $self->POP(); } } } =item EXTEND this, count X<EXTEND> Informative call that array is likely to grow to have I<count> entries. Can be used to optimize allocation. This method need do nothing. In our example there is no reason to implement this method, so we leave it as a no-op. This method is only relevant to tied array implementations where there is the possibility of having the allocated size of the array be larger than is visible to a perl programmer inspecting the size of the array. Many tied array implementations will have no reason to implement it. sub EXTEND { my $self = shift; my $count = shift; # nothing to see here, move along. } B<NOTE:> It is generally an error to make this equivalent to STORESIZE. Perl may from time to time call EXTEND without wanting to actually change the array size directly. Any tied array should function correctly if this method is a no-op, even if perhaps they might not be as efficient as they would if this method was implemented. =item EXISTS this, key X<EXISTS> Verify that the element at index I<key> exists in the tied array I<this>. In our example, we will determine that if an element consists of C<$self-E<gt>{ELEMSIZE}> spaces only, it does not exist: sub EXISTS { my $self = shift; my $index = shift; return 0 if ! defined $self->{ARRAY}->[$index] || $self->{ARRAY}->[$index] eq ' ' x $self->{ELEMSIZE}; return 1; } =item DELETE this, key X<DELETE> Delete the element at index I<key> from the tied array I<this>. In our example, a deleted item is C<$self-E<gt>{ELEMSIZE}> spaces: sub DELETE { my $self = shift; my $index = shift; return $self->STORE( $index, '' ); } =item CLEAR this X<CLEAR> Clear (remove, delete, ...) all values from the tied array associated with object I<this>. For example: sub CLEAR { my $self = shift; return $self->{ARRAY} = []; } =item PUSH this, LIST X<PUSH> Append elements of I<LIST> to the array. For example: sub PUSH { my $self = shift; my @list = @_; my $last = $self->FETCHSIZE(); $self->STORE( $last + $_, $list[$_] ) foreach 0 .. $#list; return $self->FETCHSIZE(); } =item POP this X<POP> Remove last element of the array and return it. For example: sub POP { my $self = shift; return pop @{$self->{ARRAY}}; } =item SHIFT this X<SHIFT> Remove the first element of the array (shifting other elements down) and return it. For example: sub SHIFT { my $self = shift; return shift @{$self->{ARRAY}}; } =item UNSHIFT this, LIST X<UNSHIFT> Insert LIST elements at the beginning of the array, moving existing elements up to make room. For example: sub UNSHIFT { my $self = shift; my @list = @_; my $size = scalar( @list ); # make room for our list @{$self->{ARRAY}}[ $size .. $#{$self->{ARRAY}} + $size ] = @{$self->{ARRAY}}; $self->STORE( $_, $list[$_] ) foreach 0 .. $#list; } =item SPLICE this, offset, length, LIST X<SPLICE> Perform the equivalent of C<splice> on the array. I<offset> is optional and defaults to zero, negative values count back from the end of the array. I<length> is optional and defaults to rest of the array. I<LIST> may be empty. Returns a list of the original I<length> elements at I<offset>. In our example, we'll use a little shortcut if there is a I<LIST>: sub SPLICE { my $self = shift; my $offset = shift || 0; my $length = shift || $self->FETCHSIZE() - $offset; my @list = (); if ( @_ ) { tie @list, __PACKAGE__, $self->{ELEMSIZE}; @list = @_; } return splice @{$self->{ARRAY}}, $offset, $length, @list; } =item UNTIE this X<UNTIE> Will be called when C<untie> happens. (See L</The C<untie> Gotcha> below.) =item DESTROY this X<DESTROY> This method will be triggered when the tied variable needs to be destructed. As with the scalar tie class, this is almost never needed in a language that does its own garbage collection, so this time we'll just leave it out. =back =head2 Tying Hashes X<hash, tying> Hashes were the first Perl data type to be tied (see dbmopen()). A class implementing a tied hash should define the following methods: TIEHASH is the constructor. FETCH and STORE access the key and value pairs. EXISTS reports whether a key is present in the hash, and DELETE deletes one. CLEAR empties the hash by deleting all the key and value pairs. FIRSTKEY and NEXTKEY implement the keys() and each() functions to iterate over all the keys. SCALAR is triggered when the tied hash is evaluated in scalar context, and in 5.28 onwards, by C<keys> in boolean context. UNTIE is called when C<untie> happens, and DESTROY is called when the tied variable is garbage collected. If this seems like a lot, then feel free to inherit from merely the standard Tie::StdHash module for most of your methods, redefining only the interesting ones. See L<Tie::Hash> for details. Remember that Perl distinguishes between a key not existing in the hash, and the key existing in the hash but having a corresponding value of C<undef>. The two possibilities can be tested with the C<exists()> and C<defined()> functions. Here's an example of a somewhat interesting tied hash class: it gives you a hash representing a particular user's dot files. You index into the hash with the name of the file (minus the dot) and you get back that dot file's contents. For example: use DotFiles; tie %dot, 'DotFiles'; if ( $dot{profile} =~ /MANPATH/ || $dot{login} =~ /MANPATH/ || $dot{cshrc} =~ /MANPATH/ ) { print "you seem to set your MANPATH\n"; } Or here's another sample of using our tied class: tie %him, 'DotFiles', 'daemon'; foreach $f ( keys %him ) { printf "daemon dot file %s is size %d\n", $f, length $him{$f}; } In our tied hash DotFiles example, we use a regular hash for the object containing several important fields, of which only the C<{LIST}> field will be what the user thinks of as the real hash. =over 5 =item USER whose dot files this object represents =item HOME where those dot files live =item CLOBBER whether we should try to change or remove those dot files =item LIST the hash of dot file names and content mappings =back Here's the start of F<Dotfiles.pm>: package DotFiles; use Carp; sub whowasi { (caller(1))[3] . '()' } my $DEBUG = 0; sub debug { $DEBUG = @_ ? shift : 1 } For our example, we want to be able to emit debugging info to help in tracing during development. We keep also one convenience function around internally to help print out warnings; whowasi() returns the function name that calls it. Here are the methods for the DotFiles tied hash. =over 4 =item TIEHASH classname, LIST X<TIEHASH> This is the constructor for the class. That means it is expected to return a blessed reference through which the new object (probably but not necessarily an anonymous hash) will be accessed. Here's the constructor: sub TIEHASH { my $self = shift; my $user = shift || $>; my $dotdir = shift || ''; croak "usage: @{[&whowasi]} [USER [DOTDIR]]" if @_; $user = getpwuid($user) if $user =~ /^\d+$/; my $dir = (getpwnam($user))[7] || croak "@{[&whowasi]}: no user $user"; $dir .= "/$dotdir" if $dotdir; my $node = { USER => $user, HOME => $dir, LIST => {}, CLOBBER => 0, }; opendir(DIR, $dir) || croak "@{[&whowasi]}: can't opendir $dir: $!"; foreach $dot ( grep /^\./ && -f "$dir/$_", readdir(DIR)) { $dot =~ s/^\.//; $node->{LIST}{$dot} = undef; } closedir DIR; return bless $node, $self; } It's probably worth mentioning that if you're going to filetest the return values out of a readdir, you'd better prepend the directory in question. Otherwise, because we didn't chdir() there, it would have been testing the wrong file. =item FETCH this, key X<FETCH> This method will be triggered every time an element in the tied hash is accessed (read). It takes one argument beyond its self reference: the key whose value we're trying to fetch. Here's the fetch for our DotFiles example. sub FETCH { carp &whowasi if $DEBUG; my $self = shift; my $dot = shift; my $dir = $self->{HOME}; my $file = "$dir/.$dot"; unless (exists $self->{LIST}->{$dot} || -f $file) { carp "@{[&whowasi]}: no $dot file" if $DEBUG; return undef; } if (defined $self->{LIST}->{$dot}) { return $self->{LIST}->{$dot}; } else { return $self->{LIST}->{$dot} = `cat $dir/.$dot`; } } It was easy to write by having it call the Unix cat(1) command, but it would probably be more portable to open the file manually (and somewhat more efficient). Of course, because dot files are a Unixy concept, we're not that concerned. =item STORE this, key, value X<STORE> This method will be triggered every time an element in the tied hash is set (written). It takes two arguments beyond its self reference: the index at which we're trying to store something, and the value we're trying to put there. Here in our DotFiles example, we'll be careful not to let them try to overwrite the file unless they've called the clobber() method on the original object reference returned by tie(). sub STORE { carp &whowasi if $DEBUG; my $self = shift; my $dot = shift; my $value = shift; my $file = $self->{HOME} . "/.$dot"; my $user = $self->{USER}; croak "@{[&whowasi]}: $file not clobberable" unless $self->{CLOBBER}; open(my $f, '>', $file) || croak "can't open $file: $!"; print $f $value; close($f); } If they wanted to clobber something, they might say: $ob = tie %daemon_dots, 'daemon'; $ob->clobber(1); $daemon_dots{signature} = "A true daemon\n"; Another way to lay hands on a reference to the underlying object is to use the tied() function, so they might alternately have set clobber using: tie %daemon_dots, 'daemon'; tied(%daemon_dots)->clobber(1); The clobber method is simply: sub clobber { my $self = shift; $self->{CLOBBER} = @_ ? shift : 1; } =item DELETE this, key X<DELETE> This method is triggered when we remove an element from the hash, typically by using the delete() function. Again, we'll be careful to check whether they really want to clobber files. sub DELETE { carp &whowasi if $DEBUG; my $self = shift; my $dot = shift; my $file = $self->{HOME} . "/.$dot"; croak "@{[&whowasi]}: won't remove file $file" unless $self->{CLOBBER}; delete $self->{LIST}->{$dot}; my $success = unlink($file); carp "@{[&whowasi]}: can't unlink $file: $!" unless $success; $success; } The value returned by DELETE becomes the return value of the call to delete(). If you want to emulate the normal behavior of delete(), you should return whatever FETCH would have returned for this key. In this example, we have chosen instead to return a value which tells the caller whether the file was successfully deleted. =item CLEAR this X<CLEAR> This method is triggered when the whole hash is to be cleared, usually by assigning the empty list to it. In our example, that would remove all the user's dot files! It's such a dangerous thing that they'll have to set CLOBBER to something higher than 1 to make it happen. sub CLEAR { carp &whowasi if $DEBUG; my $self = shift; croak "@{[&whowasi]}: won't remove all dot files for $self->{USER}" unless $self->{CLOBBER} > 1; my $dot; foreach $dot ( keys %{$self->{LIST}}) { $self->DELETE($dot); } } =item EXISTS this, key X<EXISTS> This method is triggered when the user uses the exists() function on a particular hash. In our example, we'll look at the C<{LIST}> hash element for this: sub EXISTS { carp &whowasi if $DEBUG; my $self = shift; my $dot = shift; return exists $self->{LIST}->{$dot}; } =item FIRSTKEY this X<FIRSTKEY> This method will be triggered when the user is going to iterate through the hash, such as via a keys(), values(), or each() call. sub FIRSTKEY { carp &whowasi if $DEBUG; my $self = shift; my $a = keys %{$self->{LIST}}; # reset each() iterator each %{$self->{LIST}} } FIRSTKEY is always called in scalar context and it should just return the first key. values(), and each() in list context, will call FETCH for the returned keys. =item NEXTKEY this, lastkey X<NEXTKEY> This method gets triggered during a keys(), values(), or each() iteration. It has a second argument which is the last key that had been accessed. This is useful if you're caring about ordering or calling the iterator from more than one sequence, or not really storing things in a hash anywhere. NEXTKEY is always called in scalar context and it should just return the next key. values(), and each() in list context, will call FETCH for the returned keys. For our example, we're using a real hash so we'll do just the simple thing, but we'll have to go through the LIST field indirectly. sub NEXTKEY { carp &whowasi if $DEBUG; my $self = shift; return each %{ $self->{LIST} } } =item SCALAR this X<SCALAR> This is called when the hash is evaluated in scalar context, and in 5.28 onwards, by C<keys> in boolean context. In order to mimic the behaviour of untied hashes, this method must return a value which when used as boolean, indicates whether the tied hash is considered empty. If this method does not exist, perl will make some educated guesses and return true when the hash is inside an iteration. If this isn't the case, FIRSTKEY is called, and the result will be a false value if FIRSTKEY returns the empty list, true otherwise. However, you should B<not> blindly rely on perl always doing the right thing. Particularly, perl will mistakenly return true when you clear the hash by repeatedly calling DELETE until it is empty. You are therefore advised to supply your own SCALAR method when you want to be absolutely sure that your hash behaves nicely in scalar context. In our example we can just call C<scalar> on the underlying hash referenced by C<$self-E<gt>{LIST}>: sub SCALAR { carp &whowasi if $DEBUG; my $self = shift; return scalar %{ $self->{LIST} } } NOTE: In perl 5.25 the behavior of scalar %hash on an untied hash changed to return the count of keys. Prior to this it returned a string containing information about the bucket setup of the hash. See L<Hash::Util/bucket_ratio> for a backwards compatibility path. =item UNTIE this X<UNTIE> This is called when C<untie> occurs. See L</The C<untie> Gotcha> below. =item DESTROY this X<DESTROY> This method is triggered when a tied hash is about to go out of scope. You don't really need it unless you're trying to add debugging or have auxiliary state to clean up. Here's a very simple function: sub DESTROY { carp &whowasi if $DEBUG; } =back Note that functions such as keys() and values() may return huge lists when used on large objects, like DBM files. You may prefer to use the each() function to iterate over such. Example: # print out history file offsets use NDBM_File; tie(%HIST, 'NDBM_File', '/usr/lib/news/history', 1, 0); while (($key,$val) = each %HIST) { print $key, ' = ', unpack('L',$val), "\n"; } untie(%HIST); =head2 Tying FileHandles X<filehandle, tying> This is partially implemented now. A class implementing a tied filehandle should define the following methods: TIEHANDLE, at least one of PRINT, PRINTF, WRITE, READLINE, GETC, READ, and possibly CLOSE, UNTIE and DESTROY. The class can also provide: BINMODE, OPEN, EOF, FILENO, SEEK, TELL - if the corresponding perl operators are used on the handle. When STDERR is tied, its PRINT method will be called to issue warnings and error messages. This feature is temporarily disabled during the call, which means you can use C<warn()> inside PRINT without starting a recursive loop. And just like C<__WARN__> and C<__DIE__> handlers, STDERR's PRINT method may be called to report parser errors, so the caveats mentioned under L<perlvar/%SIG> apply. All of this is especially useful when perl is embedded in some other program, where output to STDOUT and STDERR may have to be redirected in some special way. See nvi and the Apache module for examples. When tying a handle, the first argument to C<tie> should begin with an asterisk. So, if you are tying STDOUT, use C<*STDOUT>. If you have assigned it to a scalar variable, say C<$handle>, use C<*$handle>. C<tie $handle> ties the scalar variable C<$handle>, not the handle inside it. In our example we're going to create a shouting handle. package Shout; =over 4 =item TIEHANDLE classname, LIST X<TIEHANDLE> This is the constructor for the class. That means it is expected to return a blessed reference of some sort. The reference can be used to hold some internal information. sub TIEHANDLE { print "<shout>\n"; my $i; bless \$i, shift } =item WRITE this, LIST X<WRITE> This method will be called when the handle is written to via the C<syswrite> function. sub WRITE { $r = shift; my($buf,$len,$offset) = @_; print "WRITE called, \$buf=$buf, \$len=$len, \$offset=$offset"; } =item PRINT this, LIST X<PRINT> This method will be triggered every time the tied handle is printed to with the C<print()> or C<say()> functions. Beyond its self reference it also expects the list that was passed to the print function. sub PRINT { $r = shift; $$r++; print join($,,map(uc($_),@_)),$\ } C<say()> acts just like C<print()> except $\ will be localized to C<\n> so you need do nothing special to handle C<say()> in C<PRINT()>. =item PRINTF this, LIST X<PRINTF> This method will be triggered every time the tied handle is printed to with the C<printf()> function. Beyond its self reference it also expects the format and list that was passed to the printf function. sub PRINTF { shift; my $fmt = shift; print sprintf($fmt, @_); } =item READ this, LIST X<READ> This method will be called when the handle is read from via the C<read> or C<sysread> functions. sub READ { my $self = shift; my $bufref = \$_[0]; my(undef,$len,$offset) = @_; print "READ called, \$buf=$bufref, \$len=$len, \$offset=$offset"; # add to $$bufref, set $len to number of characters read $len; } =item READLINE this X<READLINE> This method is called when the handle is read via C<E<lt>HANDLEE<gt>> or C<readline HANDLE>. As per L<C<readline>|perlfunc/readline>, in scalar context it should return the next line, or C<undef> for no more data. In list context it should return all remaining lines, or an empty list for no more data. The strings returned should include the input record separator C<$/> (see L<perlvar>), unless it is C<undef> (which means "slurp" mode). sub READLINE { my $r = shift; if (wantarray) { return ("all remaining\n", "lines up\n", "to eof\n"); } else { return "READLINE called " . ++$$r . " times\n"; } } =item GETC this X<GETC> This method will be called when the C<getc> function is called. sub GETC { print "Don't GETC, Get Perl"; return "a"; } =item EOF this X<EOF> This method will be called when the C<eof> function is called. Starting with Perl 5.12, an additional integer parameter will be passed. It will be zero if C<eof> is called without parameter; C<1> if C<eof> is given a filehandle as a parameter, e.g. C<eof(FH)>; and C<2> in the very special case that the tied filehandle is C<ARGV> and C<eof> is called with an empty parameter list, e.g. C<eof()>. sub EOF { not length $stringbuf } =item CLOSE this X<CLOSE> This method will be called when the handle is closed via the C<close> function. sub CLOSE { print "CLOSE called.\n" } =item UNTIE this X<UNTIE> As with the other types of ties, this method will be called when C<untie> happens. It may be appropriate to "auto CLOSE" when this occurs. See L</The C<untie> Gotcha> below. =item DESTROY this X<DESTROY> As with the other types of ties, this method will be called when the tied handle is about to be destroyed. This is useful for debugging and possibly cleaning up. sub DESTROY { print "</shout>\n" } =back Here's how to use our little example: tie(*FOO,'Shout'); print FOO "hello\n"; $a = 4; $b = 6; print FOO $a, " plus ", $b, " equals ", $a + $b, "\n"; print <FOO>; =head2 UNTIE this X<UNTIE> You can define for all tie types an UNTIE method that will be called at untie(). See L</The C<untie> Gotcha> below. =head2 The C<untie> Gotcha X<untie> If you intend making use of the object returned from either tie() or tied(), and if the tie's target class defines a destructor, there is a subtle gotcha you I<must> guard against. As setup, consider this (admittedly rather contrived) example of a tie; all it does is use a file to keep a log of the values assigned to a scalar. package Remember; use strict; use warnings; use IO::File; sub TIESCALAR { my $class = shift; my $filename = shift; my $handle = IO::File->new( "> $filename" ) or die "Cannot open $filename: $!\n"; print $handle "The Start\n"; bless {FH => $handle, Value => 0}, $class; } sub FETCH { my $self = shift; return $self->{Value}; } sub STORE { my $self = shift; my $value = shift; my $handle = $self->{FH}; print $handle "$value\n"; $self->{Value} = $value; } sub DESTROY { my $self = shift; my $handle = $self->{FH}; print $handle "The End\n"; close $handle; } 1; Here is an example that makes use of this tie: use strict; use Remember; my $fred; tie $fred, 'Remember', 'myfile.txt'; $fred = 1; $fred = 4; $fred = 5; untie $fred; system "cat myfile.txt"; This is the output when it is executed: The Start 1 4 5 The End So far so good. Those of you who have been paying attention will have spotted that the tied object hasn't been used so far. So lets add an extra method to the Remember class to allow comments to be included in the file; say, something like this: sub comment { my $self = shift; my $text = shift; my $handle = $self->{FH}; print $handle $text, "\n"; } And here is the previous example modified to use the C<comment> method (which requires the tied object): use strict; use Remember; my ($fred, $x); $x = tie $fred, 'Remember', 'myfile.txt'; $fred = 1; $fred = 4; comment $x "changing..."; $fred = 5; untie $fred; system "cat myfile.txt"; When this code is executed there is no output. Here's why: When a variable is tied, it is associated with the object which is the return value of the TIESCALAR, TIEARRAY, or TIEHASH function. This object normally has only one reference, namely, the implicit reference from the tied variable. When untie() is called, that reference is destroyed. Then, as in the first example above, the object's destructor (DESTROY) is called, which is normal for objects that have no more valid references; and thus the file is closed. In the second example, however, we have stored another reference to the tied object in $x. That means that when untie() gets called there will still be a valid reference to the object in existence, so the destructor is not called at that time, and thus the file is not closed. The reason there is no output is because the file buffers have not been flushed to disk. Now that you know what the problem is, what can you do to avoid it? Prior to the introduction of the optional UNTIE method the only way was the good old C<-w> flag. Which will spot any instances where you call untie() and there are still valid references to the tied object. If the second script above this near the top C<use warnings 'untie'> or was run with the C<-w> flag, Perl prints this warning message: untie attempted while 1 inner references still exist To get the script to work properly and silence the warning make sure there are no valid references to the tied object I<before> untie() is called: undef $x; untie $fred; Now that UNTIE exists the class designer can decide which parts of the class functionality are really associated with C<untie> and which with the object being destroyed. What makes sense for a given class depends on whether the inner references are being kept so that non-tie-related methods can be called on the object. But in most cases it probably makes sense to move the functionality that would have been in DESTROY to the UNTIE method. If the UNTIE method exists then the warning above does not occur. Instead the UNTIE method is passed the count of "extra" references and can issue its own warning if appropriate. e.g. to replicate the no UNTIE case this method can be used: sub UNTIE { my ($obj,$count) = @_; carp "untie attempted while $count inner references still exist" if $count; } =head1 SEE ALSO See L<DB_File> or L<Config> for some interesting tie() implementations. A good starting point for many tie() implementations is with one of the modules L<Tie::Scalar>, L<Tie::Array>, L<Tie::Hash>, or L<Tie::Handle>. =head1 BUGS The normal return provided by C<scalar(%hash)> is not available. What this means is that using %tied_hash in boolean context doesn't work right (currently this always tests false, regardless of whether the hash is empty or hash elements). [ This paragraph needs review in light of changes in 5.25 ] Localizing tied arrays or hashes does not work. After exiting the scope the arrays or the hashes are not restored. Counting the number of entries in a hash via C<scalar(keys(%hash))> or C<scalar(values(%hash)>) is inefficient since it needs to iterate through all the entries with FIRSTKEY/NEXTKEY. Tied hash/array slices cause multiple FETCH/STORE pairs, there are no tie methods for slice operations. You cannot easily tie a multilevel data structure (such as a hash of hashes) to a dbm file. The first problem is that all but GDBM and Berkeley DB have size limitations, but beyond that, you also have problems with how references are to be represented on disk. One module that does attempt to address this need is DBM::Deep. Check your nearest CPAN site as described in L<perlmodlib> for source code. Note that despite its name, DBM::Deep does not use dbm. Another earlier attempt at solving the problem is MLDBM, which is also available on the CPAN, but which has some fairly serious limitations. Tied filehandles are still incomplete. sysopen(), truncate(), flock(), fcntl(), stat() and -X can't currently be trapped. =head1 AUTHOR Tom Christiansen TIEHANDLE by Sven Verdoolaege <F<skimo@dns.ufsia.ac.be>> and Doug MacEachern <F<dougm@osf.org>> UNTIE by Nick Ing-Simmons <F<nick@ing-simmons.net>> SCALAR by Tassilo von Parseval <F<tassilo.von.parseval@rwth-aachen.de>> Tying Arrays by Casey West <F<casey@geeknest.com>> perl584delta.pod 0000644 00000016303 15125556335 0007502 0 ustar 00 =head1 NAME perl584delta - what is new for perl v5.8.4 =head1 DESCRIPTION This document describes differences between the 5.8.3 release and the 5.8.4 release. =head1 Incompatible Changes Many minor bugs have been fixed. Scripts which happen to rely on previously erroneous behaviour will consider these fixes as incompatible changes :-) You are advised to perform sufficient acceptance testing on this release to satisfy yourself that this does not affect you, before putting this release into production. The diagnostic output of Carp has been changed slightly, to add a space after the comma between arguments. This makes it much easier for tools such as web browsers to wrap it, but might confuse any automatic tools which perform detailed parsing of Carp output. The internal dump output has been improved, so that non-printable characters such as newline and backspace are output in C<\x> notation, rather than octal. This might just confuse non-robust tools which parse the output of modules such as Devel::Peek. =head1 Core Enhancements =head2 Malloc wrapping Perl can now be built to detect attempts to assign pathologically large chunks of memory. Previously such assignments would suffer from integer wrap-around during size calculations causing a misallocation, which would crash perl, and could theoretically be used for "stack smashing" attacks. The wrapping defaults to enabled on platforms where we know it works (most AIX configurations, BSDi, Darwin, DEC OSF/1, FreeBSD, HP/UX, GNU Linux, OpenBSD, Solaris, VMS and most Win32 compilers) and defaults to disabled on other platforms. =head2 Unicode Character Database 4.0.1 The copy of the Unicode Character Database included in Perl 5.8 has been updated to 4.0.1 from 4.0.0. =head2 suidperl less insecure Paul Szabo has analysed and patched C<suidperl> to remove existing known insecurities. Currently there are no known holes in C<suidperl>, but previous experience shows that we cannot be confident that these were the last. You may no longer invoke the set uid perl directly, so to preserve backwards compatibility with scripts that invoke #!/usr/bin/suidperl the only set uid binary is now C<sperl5.8.>I<n> (C<sperl5.8.4> for this release). C<suidperl> is installed as a hard link to C<perl>; both C<suidperl> and C<perl> will invoke C<sperl5.8.4> automatically the set uid binary, so this change should be completely transparent. For new projects the core perl team would strongly recommend that you use dedicated, single purpose security tools such as C<sudo> in preference to C<suidperl>. =head2 format In addition to bug fixes, C<format>'s features have been enhanced. See L<perlform> =head1 Modules and Pragmata The (mis)use of C</tmp> in core modules and documentation has been tidied up. Some modules available both within the perl core and independently from CPAN ("dual-life modules") have not yet had these changes applied; the changes will be integrated into future stable perl releases as the modules are updated on CPAN. =head2 Updated modules =over 4 =item Attribute::Handlers =item B =item Benchmark =item CGI =item Carp =item Cwd =item Exporter =item File::Find =item IO =item IPC::Open3 =item Local::Maketext =item Math::BigFloat =item Math::BigInt =item Math::BigRat =item MIME::Base64 =item ODBM_File =item POSIX =item Shell =item Socket There is experimental support for Linux abstract Unix domain sockets. =item Storable =item Switch Synced with its CPAN version 2.10 =item Sys::Syslog C<syslog()> can now use numeric constants for facility names and priorities, in addition to strings. =item Term::ANSIColor =item Time::HiRes =item Unicode::UCD =item Win32 Win32.pm/Win32.xs has moved from the libwin32 module to core Perl =item base =item open =item threads Detached threads are now also supported on Windows. =item utf8 =back =head1 Performance Enhancements =over 4 =item * Accelerated Unicode case mappings (C</i>, C<lc>, C<uc>, etc). =item * In place sort optimised (eg C<@a = sort @a>) =item * Unnecessary assignment optimised away in my $s = undef; my @a = (); my %h = (); =item * Optimised C<map> in scalar context =back =head1 Utility Changes The Perl debugger (F<lib/perl5db.pl>) can now save all debugger commands for sourcing later, and can display the parent inheritance tree of a given class. =head1 Installation and Configuration Improvements The build process on both VMS and Windows has had several minor improvements made. On Windows Borland's C compiler can now compile perl with PerlIO and/or USE_LARGE_FILES enabled. C<perl.exe> on Windows now has a "Camel" logo icon. The use of a camel with the topic of Perl is a trademark of O'Reilly and Associates Inc., and is used with their permission (ie distribution of the source, compiling a Windows executable from it, and using that executable locally). Use of the supplied camel for anything other than a perl executable's icon is specifically not covered, and anyone wishing to redistribute perl binaries I<with> the icon should check directly with O'Reilly beforehand. Perl should build cleanly on Stratus VOS once more. =head1 Selected Bug Fixes More utf8 bugs fixed, notably in how C<chomp>, C<chop>, C<send>, and C<syswrite> and interact with utf8 data. Concatenation now works correctly when C<use bytes;> is in scope. Pragmata are now correctly propagated into (?{...}) constructions in regexps. Code such as my $x = qr{ ... (??{ $x }) ... }; will now (correctly) fail under use strict. (As the inner C<$x> is and has always referred to C<$::x>) The "const in void context" warning has been suppressed for a constant in an optimised-away boolean expression such as C<5 || print;> C<perl -i> could C<fchmod(stdin)> by mistake. This is serious if stdin is attached to a terminal, and perl is running as root. Now fixed. =head1 New or Changed Diagnostics C<Carp> and the internal diagnostic routines used by C<Devel::Peek> have been made clearer, as described in L</Incompatible Changes> =head1 Changed Internals Some bugs have been fixed in the hash internals. Restricted hashes and their place holders are now allocated and deleted at slightly different times, but this should not be visible to user code. =head1 Future Directions Code freeze for the next maintenance release (5.8.5) will be on 30th June 2004, with release by mid July. =head1 Platform Specific Problems This release is known not to build on Windows 95. =head1 Reporting Bugs If you find what you think is a bug, you might check the articles recently posted to the comp.lang.perl.misc newsgroup and the perl bug database at http://bugs.perl.org. There may also be information at http://www.perl.org, the Perl Home Page. If you believe you have an unreported bug, please run the B<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. You can browse and search the Perl 5 bugs at http://bugs.perl.org/ =head1 SEE ALSO The F<Changes> file for exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perlhurd.pod 0000644 00000003712 15125556335 0007112 0 ustar 00 If you read this file _as_is_, just ignore the funny characters you see. It is written in the POD format (see pod/perlpod.pod) which is specially designed to be readable as is. =head1 NAME perlhurd - Perl version 5 on Hurd =head1 DESCRIPTION If you want to use Perl on the Hurd, I recommend using the Debian GNU/Hurd distribution ( see L<https://www.debian.org/> ), even if an official, stable release has not yet been made. The old "gnu-0.2" binary distribution will most certainly have additional problems. =head2 Known Problems with Perl on Hurd The Perl test suite may still report some errors on the Hurd. The "lib/anydbm" and "pragma/warnings" tests will almost certainly fail. Both failures are not really specific to the Hurd, as indicated by the test suite output. The socket tests may fail if the network is not configured. You have to make "/hurd/pfinet" the translator for "/servers/socket/2", giving it the right arguments. Try "/hurd/pfinet --help" for more information. Here are the statistics for Perl 5.005_62 on my system: Failed Test Status Wstat Total Fail Failed List of failed ----------------------------------------------------------------------- lib/anydbm.t 12 1 8.33% 12 pragma/warnings 333 1 0.30% 215 8 tests and 24 subtests skipped. Failed 2/229 test scripts, 99.13% okay. 2/10850 subtests failed, 99.98% okay. There are quite a few systems out there that do worse! However, since I am running a very recent Hurd snapshot, in which a lot of bugs that were exposed by the Perl test suite have been fixed, you may encounter more failures. Likely candidates are: "op/stat", "lib/io_pipe", "lib/io_sock", "lib/io_udp" and "lib/time". In any way, if you're seeing failures beyond those mentioned in this document, please consider upgrading to the latest Hurd before reporting the failure as a bug. =head1 AUTHOR Mark Kettenis <kettenis@gnu.org> Last Updated: Fri, 29 Oct 1999 22:50:30 +0200 perltooc.pod 0000644 00000000446 15125556335 0007115 0 ustar 00 =encoding utf8 =head1 NAME perltooc - Links to information on object-oriented programming in Perl =head1 DESCRIPTION For information on OO programming with Perl, please see L<perlootut> and L<perlobj>. (The above documents supersede the tutorial that was formerly here in perltooc.) =cut perl5261delta.pod 0000644 00000017367 15125556335 0007572 0 ustar 00 =encoding utf8 =head1 NAME perl5261delta - what is new for perl v5.26.1 =head1 DESCRIPTION This document describes differences between the 5.26.0 release and the 5.26.1 release. If you are upgrading from an earlier release such as 5.24.0, first read L<perl5260delta>, which describes differences between 5.24.0 and 5.26.0. =head1 Security =head2 [CVE-2017-12837] Heap buffer overflow in regular expression compiler Compiling certain regular expression patterns with the case-insensitive modifier could cause a heap buffer overflow and crash perl. This has now been fixed. L<[perl #131582]|https://rt.perl.org/Public/Bug/Display.html?id=131582> =head2 [CVE-2017-12883] Buffer over-read in regular expression parser For certain types of syntax error in a regular expression pattern, the error message could either contain the contents of a random, possibly large, chunk of memory, or could crash perl. This has now been fixed. L<[perl #131598]|https://rt.perl.org/Public/Bug/Display.html?id=131598> =head2 [CVE-2017-12814] C<$ENV{$key}> stack buffer overflow on Windows A possible stack buffer overflow in the C<%ENV> code on Windows has been fixed by removing the buffer completely since it was superfluous anyway. L<[perl #131665]|https://rt.perl.org/Public/Bug/Display.html?id=131665> =head1 Incompatible Changes There are no changes intentionally incompatible with 5.26.0. If any exist, they are bugs, and we request that you submit a report. See L</Reporting Bugs> below. =head1 Modules and Pragmata =head2 Updated Modules and Pragmata =over 4 =item * L<base> has been upgraded from version 2.25 to 2.26. The effects of dotless C<@INC> on this module have been limited by the introduction of a more refined and accurate solution for removing C<'.'> from C<@INC> while reducing the false positives. =item * L<charnames> has been upgraded from version 1.44 to 1.45. =item * L<Module::CoreList> has been upgraded from version 5.20170530 to 5.20170922_26. =back =head1 Platform Support =head2 Platform-Specific Notes =over 4 =item FreeBSD =over 4 =item * Building with B<g++> on FreeBSD-11.0 has been fixed. L<[perl #131337]|https://rt.perl.org/Public/Bug/Display.html?id=131337> =back =item Windows =over 4 =item * Support for compiling perl on Windows using Microsoft Visual Studio 2017 (containing Visual C++ 14.1) has been added. =item * Building XS modules with GCC 6 in a 64-bit build of Perl failed due to incorrect mapping of C<strtoll> and C<strtoull>. This has now been fixed. L<[perl #131726]|https://rt.perl.org/Public/Bug/Display.html?id=131726> L<[cpan #121683]|https://rt.cpan.org/Public/Bug/Display.html?id=121683> L<[cpan #122353]|https://rt.cpan.org/Public/Bug/Display.html?id=122353> =back =back =head1 Selected Bug Fixes =over 4 =item * Several built-in functions previously had bugs that could cause them to write to the internal stack without allocating room for the item being written. In rare situations, this could have led to a crash. These bugs have now been fixed, and if any similar bugs are introduced in future, they will be detected automatically in debugging builds. L<[perl #131732]|https://rt.perl.org/Public/Bug/Display.html?id=131732> =item * Using a symbolic ref with postderef syntax as the key in a hash lookup was yielding an assertion failure on debugging builds. L<[perl #131627]|https://rt.perl.org/Public/Bug/Display.html?id=131627> =item * List assignment (C<aassign>) could in some rare cases allocate an entry on the mortal stack and leave the entry uninitialized. L<[perl #131570]|https://rt.perl.org/Public/Bug/Display.html?id=131570> =item * Attempting to apply an attribute to an C<our> variable where a function of that name already exists could result in a NULL pointer being supplied where an SV was expected, crashing perl. L<[perl #131597]|https://rt.perl.org/Public/Bug/Display.html?id=131597> =item * The code that vivifies a typeglob out of a code ref made some false assumptions that could lead to a crash in cases such as C<< $::{"A"} = sub {}; \&{"A"} >>. This has now been fixed. L<[perl #131085]|https://rt.perl.org/Public/Bug/Display.html?id=131085> =item * C<my_atof2> no longer reads beyond the terminating NUL, which previously occurred if the decimal point is immediately before the NUL. L<[perl #131526]|https://rt.perl.org/Public/Bug/Display.html?id=131526> =item * Occasional "Malformed UTF-8 character" crashes in C<s//> on utf8 strings have been fixed. L<[perl #131575]|https://rt.perl.org/Public/Bug/Display.html?id=131575> =item * C<perldoc -f s> now finds C<s///>. L<[perl #131371]|https://rt.perl.org/Public/Bug/Display.html?id=131371> =item * Some erroneous warnings after utf8 conversion have been fixed. L<[perl #131190]|https://rt.perl.org/Public/Bug/Display.html?id=131190> =item * The C<jmpenv> frame to catch Perl exceptions is set up lazily, and this used to be a bit too lazy. The catcher is now set up earlier, preventing some possible crashes. L<[perl #105930]|https://rt.perl.org/Public/Bug/Display.html?id=105930> =item * Spurious "Assuming NOT a POSIX class" warnings have been removed. L<[perl #131522]|https://rt.perl.org/Public/Bug/Display.html?id=131522> =back =head1 Acknowledgements Perl 5.26.1 represents approximately 4 months of development since Perl 5.26.0 and contains approximately 8,900 lines of changes across 85 files from 23 authors. Excluding auto-generated files, documentation and release tools, there were approximately 990 lines of changes to 38 .pm, .t, .c and .h files. Perl continues to flourish into its third decade thanks to a vibrant community of users and developers. The following people are known to have contributed the improvements that became Perl 5.26.1: Aaron Crane, Andy Dougherty, Aristotle Pagaltzis, Chris 'BinGOs' Williams, Craig A. Berry, Dagfinn Ilmari Mannsåker, David Mitchell, E. Choroba, Eric Herman, Father Chrysostomos, Jacques Germishuys, James E Keenan, John SJ Anderson, Karl Williamson, Ken Brown, Lukas Mai, Matthew Horsfall, Ricardo Signes, Sawyer X, Steve Hay, Tony Cook, Yves Orton, Zefram. The list above is almost certainly incomplete as it is automatically generated from version control history. In particular, it does not include the names of the (very much appreciated) contributors who reported issues to the Perl bug tracker. Many of the changes included in this version originated in the CPAN modules included in Perl's core. We're grateful to the entire CPAN community for helping Perl to flourish. For a more complete list of all of Perl's historical contributors, please see the F<AUTHORS> file in the Perl source distribution. =head1 Reporting Bugs If you find what you think is a bug, you might check the perl bug database at L<https://rt.perl.org/> . There may also be information at L<http://www.perl.org/> , the Perl Home Page. If you believe you have an unreported bug, please run the L<perlbug> program included with your release. Be sure to trim your bug down to a tiny but sufficient test case. Your bug report, along with the output of C<perl -V>, will be sent off to perlbug@perl.org to be analysed by the Perl porting team. If the bug you are reporting has security implications which make it inappropriate to send to a publicly archived mailing list, then see L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION> for details of how to report the issue. =head1 Give Thanks If you wish to thank the Perl 5 Porters for the work we had done in Perl 5, you can do so by running the C<perlthanks> program: perlthanks This will send an email to the Perl 5 Porters list with your show of thanks. =head1 SEE ALSO The F<Changes> file for an explanation of how to view exhaustive details on what changed. The F<INSTALL> file for how to build Perl. The F<README> file for general stuff. The F<Artistic> and F<Copying> files for copyright information. =cut perltoot.pod 0000644 00000000446 15125556335 0007136 0 ustar 00 =encoding utf8 =head1 NAME perltoot - Links to information on object-oriented programming in Perl =head1 DESCRIPTION For information on OO programming with Perl, please see L<perlootut> and L<perlobj>. (The above documents supersede the tutorial that was formerly here in perltoot.) =cut
| ver. 1.6 |
Github
|
.
| PHP 8.2.30 | ??????????? ?????????: 0.96 |
proxy
|
phpinfo
|
???????????