?????????? ????????? - ??????????????? - /usr/share/alsa-card-profile/mixer/profile-sets/sb-omni-surround-5.1.conf
???????
# This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as # published by the Free Software Foundation; either version 2.1 of the # License, or (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. ; Creative Sound Blaster Omni Surround 5.1 ; ; This config supports Linux 4.3-rc1+. ; By default there are some non-existing (physically) inputs and outputs that ; are not present in this config. ; Also in addition to natively supported modes (such as stereo, 5.1 and stereo ; S/PDIF) following useful output modes are added: 2.1, 4.0, 4.1 and 5.0. ; ; NOTE: in 2.1 and 4.1 physical LFE output will be different than in 5.1 mode. ; ; See default.conf for an explanation on the directives used here. [General] auto-profiles = no [Mapping analog-stereo-input] device-strings = hw:%f channel-map = left,right paths-input = analog-input-mic analog-input-linein direction = input [Mapping analog-stereo-output] device-strings = front:%f channel-map = left,right paths-output = analog-output direction = output [Mapping analog-surround-21] device-strings = surround51:%f channel-map = front-left,front-right,aux1,aux2,aux3,lfe paths-output = analog-output direction = output [Mapping analog-surround-40] device-strings = surround51:%f channel-map = front-left,front-right,rear-left,rear-right paths-output = analog-output direction = output [Mapping analog-surround-41] device-strings = surround51:%f channel-map = front-left,front-right,rear-left,rear-right,aux1,lfe paths-output = analog-output direction = output [Mapping analog-surround-50] device-strings = surround51:%f channel-map = front-left,front-right,rear-left,rear-right,front-center paths-output = analog-output direction = output [Mapping analog-surround-51] device-strings = surround51:%f channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe paths-output = analog-output direction = output [Mapping iec958-stereo] device-strings = iec958:%f channel-map = left,right paths-output = iec958-stereo-output direction = output [Profile output:analog-stereo-output+input:analog-stereo-input] output-mappings = analog-stereo-output input-mappings = analog-stereo-input priority = 7 [Profile output:analog-surround-21+input:analog-stereo-input] output-mappings = analog-surround-21 input-mappings = analog-stereo-input priority = 6 [Profile output:analog-surround-40+input:analog-stereo-input] output-mappings = analog-surround-40 input-mappings = analog-stereo-input priority = 5 [Profile output:analog-surround-41+input:analog-stereo-input] output-mappings = analog-surround-41 input-mappings = analog-stereo-input priority = 4 [Profile output:analog-surround-50+input:analog-stereo-input] output-mappings = analog-surround-50 input-mappings = analog-stereo-input priority = 3 [Profile output:analog-surround-51+input:analog-stereo-input] output-mappings = analog-surround-51 input-mappings = analog-stereo-input priority = 2 [Profile output:iec958-stereo+input:analog-stereo-input] output-mappings = iec958-stereo input-mappings = analog-stereo-input priority = 1
| ver. 1.6 |
Github
|
.
| PHP 8.2.30 | ??????????? ?????????: 0.26 |
proxy
|
phpinfo
|
???????????